Measurement invariance of the strength of motivation for medical school: a multi-group confirmatory factor analysis.

Science.gov (United States)

An, M; Kusurkar, R A; Li, L; Xiao, Y; Zheng, C; Hu, J; Chen, M

2017-07-11

The Strength of Motivation for Medical School-Revised (SMMS-R) questionnaire measures students' motivation for studying medicine. It includes three subscales: 'willingness to sacrifice', 'readiness to start', and 'persistence'. Measurement invariance is a prerequisite for group comparisons. The objectives of this study were to verify the factorial structure of the SMMS-R questionnaire and to investigate it's measurement invariance. A total of 989 medical students were approached, 930 cases were kept for data analysis. Factorial structure of and measurement invariance of the SMMS-R were tested using single and multiple group confirmatory factor analyses with Mplus. Trational Cronbach's α along with McDonald's ω and glb were used to measure internal consistency for each subscale. Internal consistency for subscales and the full instrument were within the acceptable range. A 3-factor structure of the Chinese version of the SMMS-R was supported. Full configural, metric and partial scalar invariance were obtained. The SMMS-R showed measurement invariance across gender and two independent samples. So it can be used for group and cross-cultural comparisons.

CONFOUNDING STRUCTURE OF TWO-LEVEL NONREGULAR FACTORIAL DESIGNS

Institute of Scientific and Technical Information of China (English)

Ren Junbai

2012-01-01

In design theory,the alias structure of regular fractional factorial designs is elegantly described with group theory.However,this approach cannot be applied to nonregular designs directly. For an arbitrary nonregular design,a natural question is how to describe the confounding relations between its effects,is there any inner structure similar to regular designs? The aim of this article is to answer this basic question.Using coefficients of indicator function,confounding structure of nonregular fractional factorial designs is obtained as linear constrains on the values of effects.A method to estimate the sparse significant effects in an arbitrary nonregular design is given through an example.

A confirmatory factor analytic study of a self-leadership measure in South Africa

Directory of Open Access Journals (Sweden)

Bright Mahembe

2013-07-01

Full Text Available Orientation: Self-leadership is considered to be essential for effective individual functioning in occupational and academic contexts. The revised self-leadership questionnaire (RSLQ is widely utilised for measuring self-leadership, but its psychometric properties have not been established on a South African sample. By implication, important questions also exist about the theoretical structure of self-leadership in the South African context. Research purpose: The research aim of this study was to investigate the reliability and factorial validity of the revised self-leadership questionnaire on a South African sample. In doing so, the results of the research would also provide valuable insights into the latent factor structure of the self-leadership construct. Motivation for the study: On a practical level, the research sought internal validity evidence for the use of the RSLQ in the South African context. On a theoretical level, questions remain about the best conceptual representation of self-leadership as a construct. Research design, approach and method: The revised self-leadership questionnaire was administered to a non-probability sample of 375 South African young adults. The first and second-order factor structure underlying contemporary models of self-leadership using confirmatory factor analytic techniques was tested. Main findings: Results showed that the RSLQ measured self-leadership with suitable reliability and internal validity. All eight subscales had high internal consistency coefficients. Confirmatory factor analysis (CFA of the first and second-order models conclusively demonstrated good factorial validity. Practical/managerial implications: The study found that the RSLQ has good measurement properties for a South African context. Academics, practitioners and managers are urged to use the measure in its present form for applications such as leadership development and promoting self-management. Contribution/value-addition: The

A Confirmatory Factor Analysis of the Structure of Abbreviated Math Anxiety Scale

Directory of Open Access Journals (Sweden)

Farahman Farrokhi

2011-06-01

Full Text Available "nObjective: The aim of this study is to explore the confirmatory factor analysis results of the Persian adaptation of Abbreviated Math Anxiety Scale (AMAS, proposed by Hopko, Mahadevan, Bare & Hunt. "nMethod: The validity and reliability assessments of the scale were performed on 298 college students chosen randomly from Tabriz University in Iran. The confirmatory factor analysis (CFA was carried out to determine the factor structures of the Persian version of AMAS. "nResults: As expected, the two-factor solution provided a better fit to the data than a single factor. Moreover, multi-group analyses showed that this two-factor structure was invariant across sex. Hence, AMAS provides an equally valid measure for use among college students. "nConclusions:  Brief AMAS demonstrates adequate reliability and validity. The AMAS scores can be used to compare symptoms of math anxiety between male and female students. The study both expands and adds support to the existing body of math anxiety literature.

Factorial validity of the Problematic Facebook Use Scale for adolescents and young adults.

Science.gov (United States)

Marino, Claudia; Vieno, Alessio; Altoè, Gianmarco; Spada, Marcantonio M

2017-03-01

Background and aims Recent research on problematic Facebook use has highlighted the need to develop a specific theory-driven measure to assess this potential behavioral addiction. The aim of the present study was to examine the factorial validity of the Problematic Facebook Use Scale (PFUS) adapted from Caplan's Generalized Problematic Internet Scale model. Methods A total of 1,460 Italian adolescents and young adults (aged 14-29 years) participated in the study. Confirmatory factor analyses were performed in order to assess the factorial validity of the scale. Results Results revealed that the factor structure of the PFUS provided a good fit to the data. Furthermore, results of the multiple group analyses supported the invariance of the model across age and gender groups. Discussion and conclusions This study provides evidence supporting the factorial validity of the PFUS. This new scale provides a theory-driven tool to assess problematic use of Facebook among male and female adolescents and young adults.

A confirmatory factor analysis of the Utrecht Work Engagement Scale for Students in a Chinese sample.

Science.gov (United States)

Meng, Lina; Jin, Yi

2017-02-01

Educational institutions play an important role in encouraging students' engagement with course work. Educators are finding instruments to measure students' engagement in order to develop strategies to improve it. Little is known about the factor structure of the Utrecht Work Engagement Scale for Students among Chinese nursing students. The aim of this research was to examine the factor structure of the Utrecht Work Engagement Scale for Students via confirmatory factor analysis. The study used a cross-sectional design. A sample of 480 students from a nursing school in one Chinese university completed the Utrecht Work Engagement Scale for Students. Factor analysis was used to analyze the resulting data. The overall results of internal consistency reliability and confirmatory factor analysis provided evidence supporting the reliability and three-factor structure of the Utrecht Work Engagement Scale for Students. The total internal consistency reliability coefficients were 0.91. Model comparison tests indicated that an oblique factors model that permitted correlations between pairs of error terms fitted the data better than other first-order models. In addition, due to the three strongly intercorrelated factors, a second-order model was found to fit the data well, providing support for the factorial structure of the Utrecht Work Engagement Scale for Students. The findings of confirmatory factor analysis provided evidence supporting the reliability and three-factor structure of the Utrecht Work Engagement Scale for Students when evaluated with a Chinese nursing student sample in this study. Thus, it is appropriate to use The Utrecht Work Engagement Scale for Students in for assessing the engagement among Chinese nursing students. Copyright © 2016 Elsevier Ltd. All rights reserved.

Factorial Structure and Preliminary Validation of the Schema Mode Inventory for Eating Disorders (SMI-ED

Directory of Open Access Journals (Sweden)

Susan G. Simpson

2018-04-01

Full Text Available Objective: The aim of this study was to examine the psychometric properties and factorial structure of the Schema Mode Inventory for Eating Disorders (SMI-ED in a disordered eating population.Method: 573 participants with disordered eating patterns as measured by the Eating Disorder Examination Questionnaire (EDE-Q completed the 190-item adapted version of the Schema Mode Inventory (SMI. The new SMI-ED was developed by clinicians/researchers specializing in the treatment of eating disorders, through combining items from the original SMI with a set of additional questions specifically representative of the eating disorder population. Psychometric testing included Confirmatory Factor Analysis (CFA and internal consistency (Cronbach's α. Multivariate Analyses of Covariance (MANCOVA was also run to test statistical differences between the EDE-Q subscales on the SMI-ED modes, while controlling for possible confounding variables.Results: Factorial analysis confirmed an acceptable 16-related-factors solution for the SMI-ED, thus providing preliminary evidence for the adequate validity of the new measure based on internal structure. Concurrent validity was also established through moderate to high correlations on the modes most relevant to eating disorders with EDE-Q subscales. This study represents the first step in creating a psychometrically sound instrument for measuring schema modes in eating disorders, and provides greater insight into the relevant schema modes within this population.Conclusion: This research represents an important preliminary step toward understanding and labeling the schema mode model for this clinical group. Findings from the psychometric evaluation of SMI-ED suggest that this is a useful tool which may further assist in the measurement and conceptualization of schema modes in this population.

Factorial Structure and Preliminary Validation of the Schema Mode Inventory for Eating Disorders (SMI-ED).

Science.gov (United States)

Simpson, Susan G; Pietrabissa, Giada; Rossi, Alessandro; Seychell, Tahnee; Manzoni, Gian Mauro; Munro, Calum; Nesci, Julian B; Castelnuovo, Gianluca

2018-01-01

Objective: The aim of this study was to examine the psychometric properties and factorial structure of the Schema Mode Inventory for Eating Disorders (SMI-ED) in a disordered eating population. Method: 573 participants with disordered eating patterns as measured by the Eating Disorder Examination Questionnaire (EDE-Q) completed the 190-item adapted version of the Schema Mode Inventory (SMI). The new SMI-ED was developed by clinicians/researchers specializing in the treatment of eating disorders, through combining items from the original SMI with a set of additional questions specifically representative of the eating disorder population. Psychometric testing included Confirmatory Factor Analysis (CFA) and internal consistency (Cronbach's α). Multivariate Analyses of Covariance (MANCOVA) was also run to test statistical differences between the EDE-Q subscales on the SMI-ED modes, while controlling for possible confounding variables. Results: Factorial analysis confirmed an acceptable 16-related-factors solution for the SMI-ED, thus providing preliminary evidence for the adequate validity of the new measure based on internal structure. Concurrent validity was also established through moderate to high correlations on the modes most relevant to eating disorders with EDE-Q subscales. This study represents the first step in creating a psychometrically sound instrument for measuring schema modes in eating disorders, and provides greater insight into the relevant schema modes within this population. Conclusion: This research represents an important preliminary step toward understanding and labeling the schema mode model for this clinical group. Findings from the psychometric evaluation of SMI-ED suggest that this is a useful tool which may further assist in the measurement and conceptualization of schema modes in this population.

Factorial Structure and Preliminary Validation of the Schema Mode Inventory for Eating Disorders (SMI-ED)

Science.gov (United States)

Simpson, Susan G.; Pietrabissa, Giada; Rossi, Alessandro; Seychell, Tahnee; Manzoni, Gian Mauro; Munro, Calum; Nesci, Julian B.; Castelnuovo, Gianluca

2018-01-01

Objective: The aim of this study was to examine the psychometric properties and factorial structure of the Schema Mode Inventory for Eating Disorders (SMI-ED) in a disordered eating population. Method: 573 participants with disordered eating patterns as measured by the Eating Disorder Examination Questionnaire (EDE-Q) completed the 190-item adapted version of the Schema Mode Inventory (SMI). The new SMI-ED was developed by clinicians/researchers specializing in the treatment of eating disorders, through combining items from the original SMI with a set of additional questions specifically representative of the eating disorder population. Psychometric testing included Confirmatory Factor Analysis (CFA) and internal consistency (Cronbach's α). Multivariate Analyses of Covariance (MANCOVA) was also run to test statistical differences between the EDE-Q subscales on the SMI-ED modes, while controlling for possible confounding variables. Results: Factorial analysis confirmed an acceptable 16-related-factors solution for the SMI-ED, thus providing preliminary evidence for the adequate validity of the new measure based on internal structure. Concurrent validity was also established through moderate to high correlations on the modes most relevant to eating disorders with EDE-Q subscales. This study represents the first step in creating a psychometrically sound instrument for measuring schema modes in eating disorders, and provides greater insight into the relevant schema modes within this population. Conclusion: This research represents an important preliminary step toward understanding and labeling the schema mode model for this clinical group. Findings from the psychometric evaluation of SMI-ED suggest that this is a useful tool which may further assist in the measurement and conceptualization of schema modes in this population. PMID:29740379

Factorial Validity and Invariance Testing of the Exercise Dependence Scale-Revised in Swedish and Portuguese Exercisers

Science.gov (United States)

Lindwall, Magnus; Palmeira, Antonio

2009-01-01

The present study investigated the factorial validity and factorial invariance of the 21-item Exercise Dependence Scale-Revised using 162 Swedish and 269 Portuguese exercisers. In addition, the prevalence of exercise dependence symptoms and links to exercise behavior, gender, and age in the two samples was also studied. Confirmatory factor…

Test of Gross Motor Development: expert validity, confirmatory validity and internal consistence

Directory of Open Access Journals (Sweden)

Nadia Cristina Valentini

2008-01-01

The Test of Gross Motor Development (TGMD-2 is an instrument used to evaluate children’s level of motor development. The objective of this study was to translate and verify the clarity and pertinence of the TGMD-2 items by experts and the confirmatory factorial validity and the internal consistence by means of test-retest of the Portuguese TGMD-2. A cross-cultural translation was used to construct the Portuguese version. The participants of this study were 7 professionals and 587 children, from 27 schools (kindergarten and elementary from 3 to 10 years old (51.1% boys and 48.9% girls. Each child was videotaped performing the test twice. The videotaped tests were then scored. The results indicated that the Portuguese version of the TGMD-2 contains clear and pertinent motor items; demonstrated satisfactory indices of confirmatory factorial validity (÷2/gl = 3.38; Goodness-of-fit Index = 0.95; Adjusted Goodness-of-fit index = 0.92 and Tucker and Lewis’s Index of Fit = 0.83 and test-retest internal consistency (locomotion r = 0.82; control of object: r = 0.88. The Portuguese TGMD-2 demonstrated validity and reliability for the sample investigated.

Testing strong factorial invariance using three-level structural equation modeling

Directory of Open Access Journals (Sweden)

Suzanne eJak

2014-07-01

Full Text Available Within structural equation modeling, the most prevalent model to investigate measurement bias is the multigroup model. Equal factor loadings and intercepts across groups in a multigroup model represent strong factorial invariance (absence of measurement bias across groups. Although this approach is possible in principle, it is hardly practical when the number of groups is large or when the group size is relatively small. Jak, Oort and Dolan (2013 showed how strong factorial invariance across large numbers of groups can be tested in a multilevel structural equation modeling framework, by treating group as a random instead of a fixed variable. In the present study, this model is extended for use with three-level data. The proposed method is illustrated with an investigation of strong factorial invariance across 156 school classes and 50 schools in a Dutch dyscalculia test, using three-level structural equation modeling.

The structure of assertiveness : a confirmatory approach

NARCIS (Netherlands)

ARRINDELL, WA; SANDERMAN, R; VANDERMOLEN, H; VANDERENDE, J; MERSCH, PP

1988-01-01

By using confirmatory factor analysis, distress and performance factors of assertion identified previously in a sample of predomi- nantly agoraphobic club members (N = 703) employing the Scale for Interpersonal Behavior (SlB) - the factors being (I) Display of negative feelings; (II) Expression of

A Confirmatory Approach to Examining the Factor Structure of the Strengths and Difficulties Questionnaire (SDQ)

DEFF Research Database (Denmark)

Niclasen, Janni; Skovgaard, Anne Mette; Andersen, Anne-Marie Nybo

2013-01-01

The aim of this study was to examine the factor structure of the Strengths and Difficulties Questionnaire (SDQ) using a Structural Confirmatory Factor Analytic approach. The Danish translation of the SDQ was distributed to 71,840 parents and teachers of 5-7 and 10-12-year-old boys and girls from ...

Complementary Exploratory and Confirmatory Factor Analyses of the French WISC-V: Analyses Based on the Standardization Sample.

Science.gov (United States)

Lecerf, Thierry; Canivez, Gary L

2017-12-28

Interpretation of the French Wechsler Intelligence Scale for Children-Fifth Edition (French WISC-V; Wechsler, 2016a) is based on a 5-factor model including Verbal Comprehension (VC), Visual Spatial (VS), Fluid Reasoning (FR), Working Memory (WM), and Processing Speed (PS). Evidence for the French WISC-V factorial structure was established exclusively through confirmatory factor analyses (CFAs). However, as recommended by Carroll (1995); Reise (2012), and Brown (2015), factorial structure should derive from both exploratory factor analysis (EFA) and CFA. The first goal of this study was to examine the factorial structure of the French WISC-V using EFA. The 15 French WISC-V primary and secondary subtest scaled scores intercorrelation matrix was used and factor extraction criteria suggested from 1 to 4 factors. To disentangle the contribution of first- and second-order factors, the Schmid and Leiman (1957) orthogonalization transformation (SLT) was applied. Overall, no EFA evidence for 5 factors was found. Results indicated that the g factor accounted for about 67% of the common variance and that the contributions of the first-order factors were weak (3.6 to 11.9%). CFA was used to test numerous alternative models. Results indicated that bifactor models produced better fit to these data than higher-order models. Consistent with previous studies, findings suggested dominance of the general intelligence factor and that users should thus emphasize the Full Scale IQ (FSIQ) when interpreting the French WISC-V. (PsycINFO Database Record (c) 2017 APA, all rights reserved).

Confirmatory Survey Results for the Reactor Building Dome Upper Structural Surfaces, Rancho Saco Nuclear Generating Station, Herald, California

International Nuclear Information System (INIS)

Wade C. Adams

2006-01-01

Results from a confirmatory survey of the upper structural surfaces of the Reactor Building Dome at the Rancho Seco Nuclear Generating Station (RSNGS) performed by the Oak Ridge Institute for Science and Education for the NRC. Also includes results of interlaboratory comparison analyses on several archived soil samples that would be provided by RSNGS personnel. The confirmatory surveys were performed on June 7 and 8, 2006

Confirmatory factor analysis of the Appraisal of Self-Care Agency Scale - Revised.

Science.gov (United States)

Stacciarini, Thaís Santos Guerra; Pace, Ana Emilia

2017-01-30

to analyze the factor structure of the Appraisal of Self-Care Agency Scale-Revised (ASAS-R), adapted for Brazil. methodological study conducted with 150 individuals with diabetes mellitus cared for by the Family Health Strategy, most of whom are elderly with low educational levels. The test of the hypothesis concerning the confirmatory factor composition of the ASAS-R was performed using latent variables structural equations. the model's goodness-of-fit indexes were satisfactory (χ2 = 259.19; χ2/g.l = 2.97, p Estrategia Salud de la Familia. El test de hipótesis de la composición factorial confirmatoria de la escala ASAS-R fue realizado por medio del modelo de ecuaciones estructurales para variables latentes. los valores de los índices de ajuste del modelo fueron satisfactorios (χ2 de 259,19; χ2/g.l de 2,97, p < 0,001; GFI = 0,85; RMR = 0,07; RMSEA = 0,09), las cargas factoriales fueron superiores a 0,40, la mayoría de las correlaciones ítem y factor varió de moderada a fuerte magnitud (0,34 la 0,58); valores de alfa total de 0,74 y de los tres factores de 0,69, 0,38 y 0,69, respectivamente. la estructura factorial de la escala obtuvo resultados satisfactorios de validez y de confiabilidad, excepto uno de sus factores. Es deseable que esa escala sea aplicada en muestras de la población general, para fortalecer los análisis de consistencia interna y de dimensionalidad de la estructura factorial; y se espera que este estudio pueda contribuir para avanzar en nuevas investigaciones que vengan a trabajar con el constructo de capacidad de autocuidado y con el desarrollo de la escala ASAS-R.

Partial validation of a French version of the ADHD-rating scale IV on a French population of children with ADHD and epilepsy. Factorial structure, reliability, and responsiveness.

Science.gov (United States)

Mercier, Catherine; Roche, Sylvain; Gaillard, Ségolène; Kassai, Behrouz; Arzimanoglou, Alexis; Herbillon, Vania; Roy, Pascal; Rheims, Sylvain

2016-05-01

Attention deficit hyperactivity disorder (ADHD) is a well-known comorbidity in children with epilepsy. In English-speaking countries, the scores of the original ADHD-rating scale IV are currently used as main outcomes in various clinical trials in children with epilepsy. In French-speaking countries, several French versions are in use though none has been fully validated yet. We sought here for a partial validation of a French version of the ADHD-RS IV regarding construct validity, internal consistency (i.e., scale reliability), item reliability, and responsiveness in a group of French children with ADHD and epilepsy. The study involved 167 children aged 6-15years in 10 French neuropediatric units. The factorial structure and item reliability were assessed with a confirmatory factorial analysis for ordered categorical variables. The dimensions' internal consistency was assessed with Guttman's lambda 6 coefficient. The responsiveness was assessed by the change in score under methylphenidate and in comparison with a control group. The results confirmed the original two-dimensional factorial structure (inattention, hyperactivity/impulsivity) and showed a satisfactory reliability of most items, a good dimension internal consistency, and a good responsiveness of the total score and the two subscores. The studied French version of the ADHD-RS IV is thus validated regarding construct validity, reliability, and responsiveness. It can now be used in French-speaking countries in clinical trials of treatments involving children with ADHD and epilepsy. The full validation requires further investigations. Copyright © 2016 Elsevier Inc. All rights reserved.

Factor structure and invariance test of the alcohol use disorder identification test (AUDIT): Comparison and further validation in a U.S. and Philippines college student sample.

Science.gov (United States)

Tuliao, Antover P; Landoy, Bernice Vania N; McChargue, Dennis E

2016-01-01

The Alcohol Use Disorder Identification Test's factor structure varies depending on population and culture. Because of this inconsistency, this article examined the factor structure of the test and conducted a factorial invariance test between a U.S. and a Philippines college sample. Confirmatory factor analyses indicated that a three-factor solution outperforms the one- and two-factor solution in both samples. Factorial invariance analyses further supports the confirmatory findings by showing that factor loadings were generally invariant across groups; however, item intercepts show non-invariance. Country differences between factors show that Filipino consumption factor mean scores were significantly lower than their U.S. counterparts.

An examination of the factorial and convergent validity of four measures of conspiracist ideation, with recommendations for researchers.

Directory of Open Access Journals (Sweden)

Viren Swami

Full Text Available A number scales have been developed to measure conspiracist ideation, but little attention has been paid to the factorial validity of these scales. We reassessed the psychometric properties of four widely-used scales, namely the Belief in Conspiracy Theories Inventory (BCTI, the Conspiracy Mentality Questionnaire (CMQ, the Generic Conspiracist Beliefs Scale (GCBS, and the One-Item Conspiracy Measure (OICM. Eight-hundred-and-three U.S. adults completed all measures, along with measures of endorsement of 9/11 and anti-vaccination conspiracy theories. Through both exploratory and confirmatory factor analysis, we found that only the BCTI had acceptable factorial validity. We failed to confirm the factor structures of the CMQ and the GBCS, suggesting these measures had poor factorial validity. Indices of convergent validity were acceptable for the BCTI, but weaker for the other measures. Based on these findings, we provide suggestions for the future refinement in the measurement of conspiracist ideation.

The Modified Reasons for Smoking Scale: factorial structure, validity and reliability in pregnant smokers.

Science.gov (United States)

De Wilde, Katrien Sophie; Tency, Inge; Boudrez, Hedwig; Temmerman, Marleen; Maes, Lea; Clays, Els

2016-06-01

Smoking during pregnancy can cause several maternal and neonatal health risks, yet a considerable number of pregnant women continue to smoke. The objectives of this study were to test the factorial structure, validity and reliability of the Dutch version of the Modified Reasons for Smoking Scale (MRSS) in a sample of smoking pregnant women and to understand reasons for continued smoking during pregnancy. A longitudinal design was performed. Data of 97 pregnant smokers were collected during prenatal consultation. Structural equation modelling was performed to assess the construct validity of the MRSS: an exploratory factor analysis was conducted, followed by a confirmatory factor analysis.Test-retest reliability (addiction, pleasure, habit and social function. Results for internal consistency and test-retest reliability were good to acceptable. There were significant associations of nicotine dependence with tension reduction and addiction and of daily consumption with addiction and habit. Validity and reliability of the MRSS were shown in a sample of pregnant smokers. Tension reduction was the most important reason for continued smoking, followed by pleasure and addiction. Although the score for nicotine dependence was low, addiction was an important reason for continued smoking during pregnancy; therefore, nicotine replacement therapy could be considered. Half of the respondents experienced depressive symptoms. Hence, it is important to identify those women who need more specialized care, which can include not only smoking cessation counselling but also treatment for depression. © 2016 John Wiley & Sons, Ltd.

The Internal Structure of Positive and Negative Affect: A Confirmatory Factor Analysis of the PANAS

Science.gov (United States)

Tuccitto, Daniel E.; Giacobbi, Peter R., Jr.; Leite, Walter L.

2010-01-01

This study tested five confirmatory factor analytic (CFA) models of the Positive Affect Negative Affect Schedule (PANAS) to provide validity evidence based on its internal structure. A sample of 223 club sport athletes indicated their emotions during the past week. Results revealed that an orthogonal two-factor CFA model, specifying error…

Perceived Competence Scale for Children: Testing for Factorial Validity and Invariance across Age and Ability.

Science.gov (United States)

Byrne, Barbara M.; Schneider, Barry H.

1988-01-01

For 241 normal and 132 gifted fifth graders and 113 normal and 117 gifted seventh graders in Ottawa (Ontario), exploratory and confirmatory factor analyses investigated the factorial validity of the Perceived Competence Scale for Children (PCSC). Overall, the PCSC demonstrated sound psychometric properties. (SLD)

Confirmatory Factor Analysis of the Structure of Statistics Anxiety Measure: An Examination of Four Alternative Models

Directory of Open Access Journals (Sweden)

Hossein Bevrani, PhD

2011-09-01

Full Text Available Objective: The aim of this study is to explore the confirmatory factor analysis results of the Persian adaptation of Statistics Anxiety Measure (SAM, proposed by Earp.Method: The validity and reliability assessments of the scale were performed on 298 college students chosen randomly from Tabriz University in Iran. Confirmatory factor analysis (CFA was carried out to determine the factor structures of the Persian adaptation of SAM.Results: As expected, the second order model provided a better fit to the data than the three alternative models. Conclusions: Hence, SAM provides an equally valid measure for use among college students. The study both expands and adds support to the existing body of math anxiety literature.

Do we all agree on how to measure work engagement? Factorial validity of Utrecht Work Engagement Scale as a standard measurement tool – A literature review

Directory of Open Access Journals (Sweden)

Konrad Kulikowski

2017-04-01

Full Text Available Work engagement as a predictor of health is an emerging concept in occupational science and the Utrecht Work Engagement Scale (UWES is the most popular work engagement measurement tool. However, despite its popularity, the UWES is not free from controversy concerning its factorial validity. In this paper, 21 research studies on both UWES-9 and UWES-17 factorial validity within the confirmatory factor analysis (CFA approach have been reviewed in order to answer the question as to which of the UWES factorial structures displays greater validity. The originally proposed threefactor structure of the UWES has been recognized as superior in 6 studies. In further 6 studies, the UWES structure with 1 general factor has been found to be superior. In 8 studies, the authors have concluded that the one- and three-factor structures could be considered equivalent. One study has failed to confirm either the one- or three-factor structure of the UWES. These ambiguous results from studies focusing on the UWES factorial validity are puzzling because they not only indicate a lack of validity for the UWES as a measurement tool but might also challenge the whole concept of work engagement as a three-factor structure of dedication, vigor and absorption. Int J Occup Med Environ Health 2017;30(2:161–175

Adaptation of the Body Image after Breast Cancer Questionnaire in the Polish context: factorial structure and validity of the scale

Directory of Open Access Journals (Sweden)

Romuald Derbis

2016-01-01

Full Text Available Background Valid assessment of body image is salient in therapy and rehabilitation of women suffering from breast cancer. Adequate instruments are still lacking in this domain. To overcome this limitation two aims were formulated in the study. First, we tested the factorial structure of the Body Image after Breast Cancer Questionnaire (BIBCQ developed by Baxter (1998 in Canada, in the Polish context. Then, we tested the construct validity of the scale. The scale is based on a multidimensional concept of the body image of chronically ill individuals proposed by Vamos (1993. Participants and procedure A group of 270 women at the mean age of 55 (range of 23-81 with breast cancer who underwent conservation, mastectomy, or lumpectomy surgery was sampled in the Amazonki community. Results Confirmatory factor analysis was used to test the factorial structure of the instrument. To test the convergent validity, scales assessing body self, body image, self-esteem, and depression were used. Divergent validity was analyzed in the context of the social desirability construct. Discriminant validity was based on comparisons between women who had undergone lumpectomy or mastectomy surgery. The results showed that within two out of six subscales proposed by Baxter, two additional subscales had to be distinguished. However, some differences in comparisons with previous validation studies were also found. Conclusions The BIBCQ scale was found to be a valid multidimensional tool of body image assessment in the Polish context. The results are discussed in terms of cross-cultural differences in body image perception in breast cancer patients and guidelines for the scale’s implementation in the Polish context.

Adaptation and Factorial Validation of the Attitudes Toward Gender Roles Scale

Directory of Open Access Journals (Sweden)

Claudia Andrade

2016-04-01

Full Text Available Abstract Attitudes toward gender roles result from a social construction process that has implications for the accepted gender role models for men and women. This study aims at the adaptation and factorial validation of a measurement scale for attitudes toward gender roles. The sample consisted of 746 college students and young professionals. Exploratory and confirmatory factor analyses were performed to check the scale's structure. A two-factor structure was found for the Attitudes toward Gender Roles Scale: the first factor reflects a traditional division of gender roles, and the second factor reflects an egalitarian division of gender roles. A preliminary study using the scale was conducted on 101 families with adult children (each family included a father, a mother, and an adult child with a university degree. The results revealed the importance of the scale in assessing the attitudes of different generations toward gender roles.

Validation of the Dyadic Coping Inventory with Chinese couples: Factorial structure, measurement invariance, and construct validity.

Science.gov (United States)

Xu, Feng; Hilpert, Peter; Randall, Ashley K; Li, Qiuping; Bodenmann, Guy

2016-08-01

The Dyadic Coping Inventory (DCI, Bodenmann, 2008) assesses how couples support each other when facing individual (e.g., workload) and common (e.g., parenting) stressors. Specifically, the DCI measures partners' perceptions of their own (Self) and their partners' behaviors (Partner) when facing individual stressors, and partners' common coping behaviors when facing common stressors (Common). To date, the DCI has been validated in 6 different languages from individualistic Western cultures; however, because culture can affect interpersonal interactions, it is unknown whether the DCI is a reliable measure of coping behaviors for couples living in collectivistic Eastern cultures. Based on data from 474 Chinese couples (N = 948 individuals), the current study examined the Chinese version of the DCI's factorial structure, measurement invariance (MI), and construct validity of test scores. Using 3 cultural groups (China, Switzerland, and the United States [U.S.]), confirmatory factor analysis revealed a 5-factor structure regarding Self and Partner and a 2-factor structure regarding Common dyadic coping (DC). Results from analyses of MI indicated that the DCI subscales met the criteria for configural, metric, and full/partial scalar invariance across cultures (Chinese-Swiss and Chinese-U.S.) and genders (Chinese men and women). Results further revealed good construct validity of the DCI test scores. In all, the Chinese version of the DCI can be used for measuring Chinese couples' coping behaviors, and is available for cross-cultural studies examining DC behaviors between Western and Eastern cultures. (PsycINFO Database Record (c) 2016 APA, all rights reserved).

Factorial and construct validity of Portuguese version (Brazil Bergen Facebook Addiction Scale

Directory of Open Access Journals (Sweden)

Hugo Rafael de Souza e Silva

Full Text Available ABSTRACT Objective To evaluate factorial and construct validity of the Brazilian Portuguese version of the Bergen Facebook Addiction Scale (BFAS-BR. Methods A sociodemographic questionnaire, the Brazilian Portuguese versions of Online Cognition Scale (OCS-BR and of BFAS-BR were applied to a sample of Health Undergraduate (n = 356. Construct validity evidences were verified through the Confirmatory Factor Analysis. Discriminant validity was examined by correlational analysis between the version of the BFAS-BR and OCS-BR. Results Proposed factorial model of BFAS did not present a good quality adjustment. So, a model restructuring was necessary from behavioral addiction theoretical views and new model presented satisfactory adjustment quality and construct validity evidence. Correlation between both tested scales was strong (ρ = 0.707 and, therefore, they measure the same construct. Conclusion The BFAS-BR show adequate factorial and construct validity.

Do we all agree on how to measure work engagement? Factorial validity of Utrecht Work Engagement Scale as a standard measurement tool - A literature review.

Science.gov (United States)

Kulikowski, Konrad

2017-03-30

Work engagement as a predictor of health is an emerging concept in occupational science and the Utrecht Work Engagement Scale (UWES) is the most popular work engagement measurement tool. However, despite its popularity, the UWES is not free from controversy concerning its factorial validity. In this paper, 21 research studies on both UWES-9 and UWES-17 factorial validity within the confirmatory factor analysis (CFA) approach have been reviewed in order to answer the question as to which of the UWES factorial structures displays greater validity. The originally proposed threefactor structure of the UWES has been recognized as superior in 6 studies. In further 6 studies, the UWES structure with 1 general factor has been found to be superior. In 8 studies, the authors have concluded that the one- and three-factor structures could be considered equivalent. One study has failed to confirm either the one- or three-factor structure of the UWES. These ambiguous results from studies focusing on the UWES factorial validity are puzzling because they not only indicate a lack of validity for the UWES as a measurement tool but might also challenge the whole concept of work engagement as a three-factor structure of dedication, vigor and absorption. Int J Occup Med Environ Health 2017;30(2):161-175. This work is available in Open Access model and licensed under a CC BY-NC 3.0 PL license.

Testing strong factorial invariance using three-level structural equation modeling

NARCIS (Netherlands)

Jak, Suzanne

Within structural equation modeling, the most prevalent model to investigate measurement bias is the multigroup model. Equal factor loadings and intercepts across groups in a multigroup model represent strong factorial invariance (absence of measurement bias) across groups. Although this approach is

Physical Dating Violence: the potential understating value of a bi-factorial model

Directory of Open Access Journals (Sweden)

Carmen Viejo

2014-01-01

Full Text Available National and international studies have pointed out Conflict Tactics Scale (CTS, Straus, 1979, 1996 as one of the most widely used measures for assessing the strategies used in situations of conflict within young couples. Nevertheless, there is not any conclusive result about its structure. Especially the physical dating violence scale has undergone several structural analyses providing monofactorial and bifactorial structures. The aim of this study was focusing on the validation of structural models using confirmatory factorial analysis (CFA of CTS within adolescent couples, considering the differences between boys and girls and between aggressors and victims. 3258 adolescents, aged 15-21, were selected using a stratified random sample and interviewed using an adaptation of the CTS questionnaire. The results pointed out that it is not possible to identify a single model fit, but boys and girls, aggressor and victims, have the same pattern: a bifactorial model which establishes different but correlated moderate aggressive behaviors and severe aggressive behaviors. These results are discussed in terms of the potential value of this two factor structure for understanding the phenomenon.

Testing the Structural Invariance of the Africultural Coping Systems Inventory Across Three Samples of African Descent Populations

Science.gov (United States)

Utsey, Shawn O.; Brown, Christa; Bolden, Mark A.

2004-01-01

Confirmatory factor analysis was used to test the factorial invariance of the Africultural Coping Systems Inventory's (ACSI) measurement model and underlying factor structure across three independent and ethnically distinct samples of African descent populations. Results indicated that factor pattern coefficients of the ACSI's underlying…

The Structure of Cognitive Abilities in Youths with Manic Symptoms: A Factorial Invariance Study

Science.gov (United States)

Beaujean, A. Alexander; Freeman, Megan Joseph; Youngstrom, Eric; Carlson, Gabrielle

2012-01-01

This study compared the structure of cognitive ability (specifically, verbal/crystallized ["Gc"] and visual-spatial ability ["Gv"]), as measured in the Wechsler Intelligence Scale for Children, in youth with manic symptoms with a nationally representative group of similarly aged youth. Multigroup confirmatory factor analysis…

Evaluación de la estructura factorial del Cuestionario de Valores Interpersonales (SIV

Directory of Open Access Journals (Sweden)

César Merino Soto

2013-09-01

Full Text Available El artículo evalúa la estructura factorial bajo los efectos del método ipsativo de respuesta, estudiados en el nivel de las subescalas del Cuestionario de Valores Interpersonales de Gordon (SIV, y las relaciones entre ellas, en una muestra de adolescentes entre 15 y 17 años de ambos sexos y procedentes de un colegio privado y estatal, representativos de los niveles socioeconómicos medio y bajo. Aunque el SIV ha sido una herramienta extensamente utilizada, no se reportado previamente un análisis de su estructura factorial en muestras Latinoamericanas. Mediante el análisis de componentes principales y el análisis factorial con un enfoque confirmatorio, se han identificado relaciones bipolares entre Independencia y Benevolencia, y Soporte y Conformidad. Se obtuvo también la confirmación del modelo de valores interpersonales propuesto por L. V. Gordon. En el análisis se consideró un aspecto que artificialmente puede haber influido en el patrón de correlaciones entre los componentes, esto es el método ipsativo de las preguntas del SIV. Finalmente, se discute sobre las medidas ipsativas y sus consecuencias en la interpretación de sus resultados. The present study evaluates the factorial structure, in the level of the subscales, of the Survey of Interpersonal Values (SIV, and the relationships among them, in a sample of adolescents between 15 and 17 years old of both sexes and from a private and public school, representative of low and middle socioeconomic levels. Although the SIV has been a widely used tool, there is no report of an analysis of its factorial structure in Latin-American samples. By means of the principal components analysis and the factorial analysis with a confirmatory approach, bipolar relationships have been identified between Independence and Benevolence, and Support and Conformity. The confirmation of the pattern of interpersonal values proposed by L. V. Gordon was also accomplished. An aspect considered in the

The factorial structure of job-related affective well-being: Polish adaptation of the Warr's measure.

Science.gov (United States)

Mielniczuk, Emilia; Łaguna, Mariola

2018-02-16

The first aim of the study reported in this article was to test the factorial structure of job-related affect in a Polish sample. The second aim was to develop the Polish adaptation of the Warr's job-related affective well-being measure published in 1990, which is designed to assess 4 types of affect at work: anxiety, comfort, depression, enthusiasm. A longitudinal study design with 2 measurement times was used for verifying the psychometric properties of the Polish version of the measure. The final sample consisted of 254 Polish employees from different professions. Participants were asked to fill in a set of questionnaires consisting of measures capturing job-related affective well-being, mood, and turnover intention. The first step of analysis was to test the theoretically-based structure of the job-related affective well-being measure in a Polish sample. The confirmatory factor analysis revealed that a 4-factor model best describes the structure of the measure in comparison to 5 alternative models. Next, reliability of this measure was assessed. All scales achieved good internal consistency and acceptable test-retest reliability after 2 weeks. Finally, the convergent and discriminant validity as well as the criterion and predictive validity of all job-related affective well-being scales was confirmed, based on correlations between job-related affect and mood as well as turnover intention. The results suggest that the Polish adaptation of Warr's job-related affective well-being measure can be used by scientists as well as by practitioners who aim at assessing 4 types of affective well-being at a work context. This work is available in Open Access model and licensed under a CC BY-NC 3.0 PL license.

Assessment of the confiability and factorial structure of three scales measuring chronic procrastination

OpenAIRE

Doris Argumedo Bustinza; Karem Díaz Cema; Arturo Calderón García; Juan Francisco Díaz-Morales; Joseph R. Ferrari

2005-01-01

This study explores the confiability and factorial structure of three scales measuring chronic procrastination: Scale of General Procrastination (EPG. Lay. 1986). Adult Procrastinatio Inventory (lPA. McCown & Johnson as cited in Ferrari. Johnson & McCown. 1995) and the Scale of Procrastination in Decision-Making (PTF. Mann. 1982). The sample included 514 adults between 20 and 65 years of age from Lima. The three scales showed high levels of intemal consistency and factorial analysis s...

Factorial Validation of Malaysian Adapted Brunel Mood Scale in an Adolescent Sample

OpenAIRE

Hashim, Hairul Anuar; Zulkifli, Erie Zuraidee; Yusof @ Hanafi, Hazwani Ahmad

2010-01-01

Purpose The present study investigated the psychometric properties of a Malaysian adapted Brunel Mood Scale. Methods The questionnaire was administered to 355 young sport athletes with a mean age of 14.69+1.70 years. Confirmatory factor analysis (CFA) and Cronbach's alpha were used to determine the factorial validity and the internal consistency of the questionnaire respectively. Results CFA results revealed adequate model fit, best represented by a 6-factor model with one of the items remove...

Confirmatory factor analysis reveals a latent cognitive structure common to bipolar disorder, schizophrenia, and normal controls.

Science.gov (United States)

Schretlen, David J; Peña, Javier; Aretouli, Eleni; Orue, Izaskun; Cascella, Nicola G; Pearlson, Godfrey D; Ojeda, Natalia

2013-06-01

We sought to determine whether a single hypothesized latent factor structure would characterize cognitive functioning in three distinct groups. We assessed 576 adults (340 community controls, 126 adults with bipolar disorder, and 110 adults with schizophrenia) using 15 measures derived from nine cognitive tests. Confirmatory factor analysis (CFA) was conducted to examine the fit of a hypothesized six-factor model. The hypothesized factors included attention, psychomotor speed, verbal memory, visual memory, ideational fluency, and executive functioning. The six-factor model provided an excellent fit for all three groups [for community controls, root mean square error of approximation (RMSEA) schizophrenia, RMSEA = 0.06 and CFI = 0.98]. Alternate models that combined fluency with processing speed or verbal and visual memory reduced the goodness of fit. Multi-group CFA results supported factor invariance across the three groups. Confirmatory factor analysis supported a single six-factor structure of cognitive functioning among patients with schizophrenia or bipolar disorder and community controls. While the three groups clearly differ in level of performance, they share a common underlying architecture of information processing abilities. These cognitive factors could provide useful targets for clinical trials of treatments that aim to enhance information processing in persons with neurological and neuropsychiatric disorders. © 2013 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

Original article Construct validity, dimensionality and factorial invariance of the Rosenberg Self-Esteem Scale: a bifactor modelling approach among children of prisoners

Directory of Open Access Journals (Sweden)

Kathryn Sharratt

2014-12-01

Full Text Available Background The Rosenberg Self-Esteem Scale (RSES has traditionally been conceptualised as a unidimensional measure of self-esteem, but empirical evidence is equivocal, with some studies supporting a one-factor solution and others favouring multidimensional models. Participants and procedure The aim of this study was to examine the factor structure, factorial invariance and composite reliability of the RSES within a European sample of children affected by parental imprisonment (N = 724. The study specified and tested six alternative factor models using conventional confirmatory factor analytic (CFA techniques and a confirmatory bifactor modelling approach. Results The RSES was most effectively represented by a bifactor model including a general self-esteem factor comprising all ten scale items and separate method effects for the positively and negatively phrased items. This model was found to be factorially invariant among boys and girls. Composite reliability indicated good internal consistency for the general self-esteem dimension but slightly less so for the positive and negative method effects. Conclusions It follows that the calculation of a total RSES score is appropriate for children of prisoners, providing that the presence of method effects is taken into consideration to avoid giving rise to false interpretations. This study demonstrated the application of a bifactorial modeling approach as a potential solution.

Nuclear structure physics at RI beam factory

International Nuclear Information System (INIS)

Otsuka, Takaharu

1998-01-01

The nuclear structure physics is becoming extremely interesting owing to recent development of RI beam factories. Among various interesting developments in this field, I will focus upon two subjects. One is the breaking of the usual magic numbers in unstable nuclei, and the other is the invention of a new method for quantum many-body problems: Quantum Monte Carlo diagonalization method (QMCD). For the first subject, I will discuss the vanishing of N=8 and 20 magic numbers in 11 Li and 32 Mg, respectively. For the latter, I will present brief description of the theory and results of some applications including the one to 64 Ge, a proton-rich unstable nucleus. (author)

Test of Gross Motor Development : Expert Validity, confirmatory validity and internal consistence

Directory of Open Access Journals (Sweden)

Nadia Cristina Valentini

2008-12-01

Full Text Available The Test of Gross Motor Development (TGMD-2 is an instrument used to evaluate children’s level of motordevelopment. The objective of this study was to translate and verify the clarity and pertinence of the TGMD-2 items by expertsand the confirmatory factorial validity and the internal consistence by means of test-retest of the Portuguese TGMD-2. Across-cultural translation was used to construct the Portuguese version. The participants of this study were 7 professionalsand 587 children, from 27 schools (kindergarten and elementary from 3 to 10 years old (51.1% boys and 48.9% girls.Each child was videotaped performing the test twice. The videotaped tests were then scored. The results indicated thatthe Portuguese version of the TGMD-2 contains clear and pertinent motor items; demonstrated satisfactory indices ofconfirmatory factorial validity (χ2/gl = 3.38; Goodness-of-fit Index = 0.95; Adjusted Goodness-of-fit index = 0.92 and Tuckerand Lewis’s Index of Fit = 0.83 and test-retest internal consistency (locomotion r = 0.82; control of object: r = 0.88. ThePortuguese TGMD-2 demonstrated validity and reliability for the sample investigated.

Assessment of the confiability and factorial structure of three scales measuring chronic procrastination

Directory of Open Access Journals (Sweden)

Doris Argumedo Bustinza

2005-06-01

Full Text Available This study explores the confiability and factorial structure of three scales measuring chronic procrastination: Scale of General Procrastination (EPG. Lay. 1986. Adult Procrastinatio Inventory (lPA. McCown & Johnson as cited in Ferrari. Johnson & McCown. 1995 and the Scale of Procrastination in Decision-Making (PTF. Mann. 1982. The sample included 514 adults between 20 and 65 years of age from Lima. The three scales showed high levels of intemal consistency and factorial analysis showed three factors for EPG and IPA and one factor for PTD A second degree factorial analysis suggested the presence of only one factor based on the grouping of items of the EPG and IPA scales The study did not find theoretically relevant dlfferences in chronic procrastination according to gender, age or education level. However,with respect to socioeconomic status. there were higher levels of chronic procrastmation in the poorest sector

Colorful Microbial Cell Factories

DEFF Research Database (Denmark)

Petersen, Pia Damm

Yeast cell factories are powerful tools used for the production of high-value natural compounds otherwise not easily available. Many bioactive and industrially important plant secondary metabolites can be produced in yeast by engineering their biosynthetic pathways into yeast cells, as these both...... anthocyanins. Yeast cell factories present a platform to circumvent the problem of low yields of interesting molecular structures in plant tissues, as hand-picking of desired enzyme activities allows for specific biosynthesis of the precise pigment of interest, as well as choosing more stable structures...... for heterologous biosynthesis is possible. In cell factories, great improvements in yields can be achieved through molecular engineering of flux from endogenous yeast precursors, e.g. by elimination of by-product formation, and by genetic optimization of pathway components, such as fine-tuning of expression levels...

Factor structure of the CES-D and measurement invariance across gender in Mainland Chinese adolescents.

Science.gov (United States)

Wang, Mengcheng; Armour, Cherie; Wu, Yan; Ren, Fen; Zhu, Xiongzhao; Yao, Shuqiao

2013-09-01

The primary aim was to examine the depressive symptom structure of Mainland China adolescents using the Center for Epidemiologic Studies Depression Scale (CES-D). Exploratory factor analysis (EFA) and confirmatory factor analysis (CFA) were simultaneously conducted to determine the structure of the CES-D in a large scale, representative adolescent samples recruited from Mainland China. Multigroup CFA (N = 5059, 48% boys, mean = 16.55±1.06) was utilized to test the factorial invariance of the depressive symptom structure, which was generated by EFA and confirmed by CFA across gender. The CES-D can be interpreted in terms of 3 symptom dimensions. Additionally, factorial invariance of the new proposed model across gender was supported at all assuming different degrees of invariance. Mainland Chinese adolescents have specific depressive symptom structure, which is consistent across gender. © 2013 Wiley Periodicals, Inc.

Do we all agree on how to measure work engagement? Factorial validity of Utrecht Work Engagement Scale as a standard measurement tool – A literature review

OpenAIRE

Konrad Kulikowski

2017-01-01

Work engagement as a predictor of health is an emerging concept in occupational science and the Utrecht Work Engagement Scale (UWES) is the most popular work engagement measurement tool. However, despite its popularity, the UWES is not free from controversy concerning its factorial validity. In this paper, 21 research studies on both UWES-9 and UWES-17 factorial validity within the confirmatory factor analysis (CFA) approach have been reviewed in order to answer the question as to which of th...

The factorial structure of professionally-applied physical fitness of students of railway specialties

Directory of Open Access Journals (Sweden)

Anzhelika Yefremova

2017-02-01

Full Text Available Purpose: to define the factorial structure of professionally-applied physical fitness of students – future electrical engineers of railway transport. Material & Methods: analysis and synthesis of references, questioning, anthropometry, testing, functional tests, and methods of mathematical statistics (the factorial analysis with application of the computer program "SPSS 17.0". 50 students (young men of Ukrainian state railway university participated in the research. Results: the ratio of means of physical culture which are expedient to use for the optimization of professionally-applied physical training of future specialists of the railway branch is defined. Conclusions: the factorial analysis allowed to distribute means of physical education as follows: physical exercises which are directed to the increase in physical working capacity and overall physical fitness – about 40%; exercises on the development of power qualities – 25%; exercises on the development of high-speed and power endurance – 15%; means which are allocated for the improvement of functions of attention and kinetic sensitivity – 10%; exercises which are directed to the increase in special working capacity – 10%.

Confirmatory factor analysis of the Drive for Muscularity Scale-S (DMS-S) and Male Body Attitudes Scale-S (MBAS-S) among male university students in Buenos Aires.

Science.gov (United States)

Compte, Emilio J; Sepúlveda, Ana R; de Pellegrin, Yolanda; Blanco, Miriam

2015-06-01

Several studies have demonstrated that men express body dissatisfaction differently than women. Although specific instruments that address body dissatisfaction in men have been developed, only a few have been validated in Latin-American male populations. The aim of this study was to reassess the factor structure of the Spanish versions of the Drive for Muscularity Scale (DMS-S) and the Male Body Attitudes Scale (MBAS-S) in an Argentinian sample. A cross-sectional study was conducted among 423 male students to examine: the factorial structure (confirmatory factor analysis), the internal consistency reliability, and the concurrent, convergent and discriminant validity of both scales. Results replicated the two factor structures for the DMS-S and MBAS-S. Both scales showed excellent levels of internal consistency, and various measures of construct validity indicated that the DMS-S and MBAS-S were acceptable and valid instruments to assess body dissatisfaction in Argentinian males. Copyright © 2015 Elsevier Ltd. All rights reserved.

On the factorial and construct validity of the Intrinsic Motivation Inventory: conceptual and operational concerns.

Science.gov (United States)

Markland, D; Hardy, L

1997-03-01

The Intrinsic Motivation Inventory (IMI) has been gaining acceptance in the sport and exercise domain since the publication of research by McAuley, Duncan, and Tammen (1989) and McAuley, Wraith, and Duncan (1991), which reported confirmatory support for the factorial validity of a hierarchical model of intrinsic motivation. Authors of the present study argue that the results of these studies did not conclusively support the hierarchical model and that the model did not accurately reflect the tenets of cognitive evaluation theory (Deci & Ryan, 1985) from which the IMI is drawn. It is also argued that a measure of perceived locus of causality is required to model intrinsic motivation properly. The development of a perceived locus of causality for exercise scale is described, and alternative models, in which perceived competence and perceived locus of causality are held to have causal influences on intrinsic motivation, are compared with an oblique confirmatory factor analytic model in which the constructs are held at the same conceptual level. Structural equation modeling showed support for a causal model in which perceived locus of causality mediates the effects of perceived competence on pressure-tension, interest-enjoyment, and effort-importance. It is argued that conceptual and operational problems with the IMI, as currently used, should be addressed before it becomes established as the instrument of choice for assessing levels of intrinsic motivation.

The factorial structure of pathological gambling.

Science.gov (United States)

Steel, Z; Blaszczynski, A

1996-03-01

Pathological gambling has been characterised by DSM-III-R and DSM-IV as a disorder of impulse control with a proportion of gamblers identified as meeting criteria for a co-morbid diagnosis of Antisocial Personality Disorder. To date, empirical evidence in support of the notion that pathological gamblers as a group manifest elevated traits of impulsivity remains equivocal. Principal components analysis was used to investigate relationships between the constructs of impulsivity, psychopathy, DSM-III-R criteria for Antisocial Personality Disorder, psychological distress, criminal offending behavior and a range of other common psychological measures employed with pathological gamblers. The sample comprised 115 pathological gamblers, 80 consecutive gamblers seeking treatment from a general hospital psychiatric inpatient behavior therapy unit, and 35 volunteer Gamblers Anonymous attenders. Four primary factors were determined: psychological distress, sensation seeking, crime and liveliness, and impulsive-antisocial. Results suggest that pathological gambling consists of a number of discrete and reproducible factorial structures. The impulsive antisocial factor was found to be associated with gambling behavior and indices of poor psychosocial functioning.

A General Procedure to Assess the Internal Structure of a Noncognitive Measure--The Student360 Insight Program (S360) Time Management Scale. Research Report. ETS RR-11-42

Science.gov (United States)

Ling, Guangming; Rijmen, Frank

2011-01-01

The factorial structure of the Time Management (TM) scale of the Student 360: Insight Program (S360) was evaluated based on a national sample. A general procedure with a variety of methods was introduced and implemented, including the computation of descriptive statistics, exploratory factor analysis (EFA), and confirmatory factor analysis (CFA).…

The structure of PTSD symptoms: a test of alternative models using confirmatory factor analysis.

Science.gov (United States)

Elklit, Ask; Shevlin, Mark

2007-09-01

This study aimed to examine the structure of self-reported post-traumatic stress disorder (PTSD) symptoms. Based on previous factor analytic findings and the DSM-IV formulation, six confirmatory factor models were specified and estimated that reflected different symptom clusters. The analyses were based on responses from 1116 participants who had suffered whiplash injuries and screened for full or subclinical PTSD using the Harvard Trauma Questionnaire. A correlated four-factor model with re-experiencing, avoidance, dysphoria and arousal factors fitted the data very well. Correlations with criteria measures showed that these factors were associated with other trauma related variables in a theoretically predictable way and showed evidence of unique predictive utility. These results concur with previous research findings using different trauma populations but do not reflect the current DSM-IV symptom groupings.

Factorial validity of the Utrecht Work Engagement Scale (UWES) across occupational groups in Norway.

Science.gov (United States)

Nerstad, Christina G L; Richardsen, Astrid M; Martinussen, Monica

2010-08-01

The present study investigated the factorial validity of the Utrecht Work Engagement Scale (UWES) among 1266 participants from ten different occupational groups. Confirmatory factor analyses of the total sample, as well as multi-group analyses and analyses of each of the ten occupational groups separately, indicated that a three-dimensional model of both the UWES-17 and the short version, UWES-9, provided a better fit to the data than a one- and two-dimensional model. The results of multi-group analyses and analyses of each of the groups separately, indicated that with a few exceptions, the three-factor model of work engagement provided the best fit. Results indicated factorial invariance and the internal consistencies were acceptable. The fit of the UWES-9 was slightly better than the UWES-17. It is concluded that the Norwegian short version may be recommended over the UWES-17.

Photon Factory activity report, 1995

Energy Technology Data Exchange (ETDEWEB)

NONE

1997-12-31

The Photon Factory at the National Laboratory for High Energy Physics is a national facility for scientific research utilizing synchrotron radiation. Although the Photon Factory operator the linear injector, two light sources including the 2.5 GeV storage ring and the 6.5 GeV TRISTAN accumulation Ring as well as a major fraction of their beamlines and experimental station. This report is covered the period from October 1994 to September 1995. The total number of proposals by this PAC was 399 in 1995. Facility development projects currently in progress include the following, TRISTAN Super Light Facility (TSLF) project, VUV-FEL project, KEKB project and Slow-positron Source. This report contents outline of the Photon Factory, introduction, scientific disciplines, electronic properties of condensed matters, atomic and molecular science, X-ray imaging, radiobiology using synchrotron radiation, structural properties of condensed matters, structural properties of solid surfaces and adsorbates, structure and function of proteins, theoretical researches, experimental facilities, beamlines, new instrumentation, AR Upgrade, collaborations, projects, user`s short reports, list of published papers 1994/95. (S.Y.)

Photon Factory activity report, 1995

International Nuclear Information System (INIS)

1996-01-01

The Photon Factory at the National Laboratory for High Energy Physics is a national facility for scientific research utilizing synchrotron radiation. Although the Photon Factory operator the linear injector, two light sources including the 2.5 GeV storage ring and the 6.5 GeV TRISTAN accumulation Ring as well as a major fraction of their beamlines and experimental station. This report is covered the period from October 1994 to September 1995. The total number of proposals by this PAC was 399 in 1995. Facility development projects currently in progress include the following, TRISTAN Super Light Facility (TSLF) project, VUV-FEL project, KEKB project and Slow-positron Source. This report contents outline of the Photon Factory, introduction, scientific disciplines, electronic properties of condensed matters, atomic and molecular science, X-ray imaging, radiobiology using synchrotron radiation, structural properties of condensed matters, structural properties of solid surfaces and adsorbates, structure and function of proteins, theoretical researches, experimental facilities, beamlines, new instrumentation, AR Upgrade, collaborations, projects, user's short reports, list of published papers 1994/95. (S.Y.)

Photon Factory activity report, 1995

Energy Technology Data Exchange (ETDEWEB)

NONE

1996-12-31

The Photon Factory at the National Laboratory for High Energy Physics is a national facility for scientific research utilizing synchrotron radiation. Although the Photon Factory operator the linear injector, two light sources including the 2.5 GeV storage ring and the 6.5 GeV TRISTAN accumulation Ring as well as a major fraction of their beamlines and experimental station. This report is covered the period from October 1994 to September 1995. The total number of proposals by this PAC was 399 in 1995. Facility development projects currently in progress include the following, TRISTAN Super Light Facility (TSLF) project, VUV-FEL project, KEKB project and Slow-positron Source. This report contents outline of the Photon Factory, introduction, scientific disciplines, electronic properties of condensed matters, atomic and molecular science, X-ray imaging, radiobiology using synchrotron radiation, structural properties of condensed matters, structural properties of solid surfaces and adsorbates, structure and function of proteins, theoretical researches, experimental facilities, beamlines, new instrumentation, AR Upgrade, collaborations, projects, user`s short reports, list of published papers 1994/95. (S.Y.)

Confirmatory measurements of special nuclear materials

International Nuclear Information System (INIS)

Belew, W.L.; Williams, T.L.

1985-01-01

Confirmatory measurements have been considered to be interim measures until accountability measurements could be performed. When the objectives of the measurements are defined and, measurement techniques selected to attain these objectives, confirmatory type measurements can significantly increase the effectiveness of the safeguards system and in some cases may be preferred to accountability measurements for safeguards purposes. The use of fingerprint type confirmatory measurements can provide highly reliable data to ensure no diversion of SNM has occurred. These measurements can be made quickly to provide rapid assessments of SNM in shipping or storage containers. The use of fingerprint type measurements at SRP on enriched uranium shipments was shown to provide assurance at a high confidence level that no diversion of SNM could have occurred. The objective of the 10 day DOE requirement for accountability measurements is to provide a rapid assessment of SNM quantity for safeguards purposes. In cases where confirmatory or fingerprint measurements have provided assurance that no diversion has occurred, the safeguards system is not compromised by delay of the accountability measurements. The accountability measurements can then be performed for inventory purposes without undue time constraints in a more cost effective and efficient manner. 1 fig

Information Management for Factory Planning and Design

OpenAIRE

Chen, Danfang

2012-01-01

This thesis is dedicated to the manufacturing industry for the improvement of information management within the factory planningand design domain, and for more efficient factory planning and design. Currently the manufacturing industry lacks sufficient methods for capturing, structuring, and representing information and knowledge for easy access, exchange, integration and reuse within the domain. Therefore the focus of this thesis is on information and knowledge management within factory plan...

Turkish Version of the Survey of Attitudes toward Statistics: Factorial Structure Invariance by Gender

Science.gov (United States)

Sarikaya, Esma Emmioglu; Ok, Ahmet; Aydin, Yesim Capa; Schau, Candace

2018-01-01

This study examines factorial structure and the gender invariance of the Turkish version of the Survey of Attitudes toward Statistics (SATS-36). The SATS-36 has 36 items measuring six components: affect, cognitive competence, value, difficulty, effort, and interest. Data were collected from 347 university students. Results showed that the Turkish…

An ultra-short screening version of the Recalled Parental Rearing Behavior questionnaire (FEE-US and its factor structure in a representative German sample

Directory of Open Access Journals (Sweden)

Petrowski Katja

2012-11-01

Full Text Available Abstract Background The Recalled Parental Rearing Behavior questionnaire (FEE, [1,2] assesses perceived parental rearing behavior separately for each parent. An ultra-short screening version (FEE-US with the same three scales each for the mother and the father is reported and factor-analytically validated. Methods N = 4,640 subjects aged 14 to 92 (M = 48.4 years were selected by the random-route sampling method. The ultra-short questionnaire version was derived from the long version through item and factor analyses. In a confirmatory factor analysis framework, the hypothesized three-factorial structure was fitted to the empirical data and tested for measurement invariance, differential item functioning, item discriminability, and convergent and discriminant factorial validity. Effects of gender or age were assessed using MANOVAs. Results The a-priori hypothesized model resulted in mostly adequate overall fit. Neither gender nor age group yielded considerable effects on the factor structure, but had small effects on means of raw score sums. Factorial validities could be confirmed. Scale sums are well-suited to rank respondents along the respective latent dimension. Conclusion The structure of the long version with the factors Rejection & Punishment, Emotional Warmth, and Control & Overprotection could be replicated for both father and mother items in the ultra-short screening version using confirmatory factor analyses. These results indicate that the ultra-short screening version is a time-saving and promising screening instrument for research settings and in individual counseling. However, the shortened scales do not necessarily represent the full spectrum covered by the full-scale dimensions.

Virtual Learning Factory on VR-Supported Factory Planning

OpenAIRE

Weidig , Christian; Menck , Nicole; Winkes , Pascal ,; Aurich , Jan ,

2014-01-01

Part 13: Virtual Reality and Simulation; International audience; Learning Factories are becoming popular as tangible measures to teach engineering methods while making use of them in an industrial-like environment. Their core component is usually a factory demonstrator, users are physically working with. For factory planning such approaches can hardly be adapted, due to long lasting realization phases.To overcome this obstacle a virtual learning factory has been developed whose core component...

The Factor Structure and Age-Related Factorial Invariance of the Delis-Kaplan Executive Function System (D-KEFS)

Science.gov (United States)

Latzman, Robert D.; Markon, Kristian E.

2010-01-01

There has been an increased interest in the structure of and relations among executive functions.The present study examined the factor structure as well as age-related factorial invariance of the Delis-Kaplan Executive Function System (D-KEFS), a widely used inventory aimed at assessing executive functions. Analyses were first conducted using data…

Structural validity of the Pittsburgh Sleep Quality Index in Chinese undergraduate students: A confirmatory factor analysis

Directory of Open Access Journals (Sweden)

Suran Guo

2016-08-01

Full Text Available The purpose of this study was to examine the structural validity of the Pittsburgh Sleep Quality Index (PSQI in Chinese undergraduate students. A cross-sectional questionnaire survey with 631 Chinese undergraduate students was conducted, and the questionnaire package included a measure of demographic characteristics, Pittsburgh Sleep Quality Index (PSQI, Chinese editions of Center for Epidemiologic Studies-Depression, State- Trait Anxiety Inventory, Rumination Response Scale, and Perceived Social Support Scale. Results showed that the item use of sleep medicine was not suitable for use with this population, that a two-factor model provided the best fit to the data as assessed through confirmatory factor analysis, and that other indices were consistently correlated with the sleep quality but not the sleep efficiency factor.

Nuclear physics at the KAON factory

International Nuclear Information System (INIS)

Kitching, R.

1989-05-01

The author surveys the range of nuclear physics issues which can be addressed with a high intensity hadron facility such as the KAON factory. He discusses hadron spectroscopy, kaon scattering, hypernuclear physics, spin physics, and nuclear physics with neutrinos. Nuclear Physics is defined rather broadly, encompassing the study of strongly interacting systems, and including the structure of individual hadrons, hadron-hadron interactions, hadronic weak and electromagnetic currents (in nuclei too), conventional nuclear structure, and exotic nuclei. The basic theme is how the KAON Factory can shed light on non-perturbative QCD and its relation to conventional nuclear physics

10 CFR 26.101 - Conducting a confirmatory test for alcohol.

Science.gov (United States)

2010-01-01

... 10 Energy 1 2010-01-01 2010-01-01 false Conducting a confirmatory test for alcohol. 26.101 Section... Testing § 26.101 Conducting a confirmatory test for alcohol. (a) The confirmatory test must begin as soon... that meets the requirements of § 26.91(b) and (c) was used for the initial alcohol test, the same EBT...

A Markov Chain Monte Carlo Approach to Confirmatory Item Factor Analysis

Science.gov (United States)

Edwards, Michael C.

2010-01-01

Item factor analysis has a rich tradition in both the structural equation modeling and item response theory frameworks. The goal of this paper is to demonstrate a novel combination of various Markov chain Monte Carlo (MCMC) estimation routines to estimate parameters of a wide variety of confirmatory item factor analysis models. Further, I show…

Escala de bienestar de Ryff: análisis comparativo de los modelos teóricos en distintos grupos de edad Ryff scale of well-being: factorial structure of theoretical models in different age groups

Directory of Open Access Journals (Sweden)

Pablo Vera-Villarroel

2013-01-01

Full Text Available La escala de bienestar psicológico surge a partir del modelo multidimensional propuesto por Ryff (1989. Pese a su amplia utilización, su estructura teórica inicial no ha sido confirmada completamente, debido a que se han encontrado otro tipo de soluciones factoriales distintas a las 6 dimensiones propuestas por la autora. Estas divergencias podrían estar relacionadas al tipo de muestras y poblaciones utilizadas. Ante esto, la siguiente investigación compara el ajuste factorial de los modelos tradicionalmente aplicados de corrección en distintos grupos en edad adulta. Se describen las propiedades psicométricas de la adaptación al español realizada por Díaz et al. (2006, analizando los niveles de confiabilidad (consistencia interna y estabilidad temporal y estructura factorial confirmatoria, en datos de 1646 personas entre 18 y 90 años de edad. Se encuentran diferencias en los indicadores de confiabilidad para la escala total y las dimensiones, así como en los indicadores de bondad de ajuste dependiendo del grupo de edad. El modelo que presenta mejores indicadores de ajuste en la mayoría de los rangos etarios evaluados fue el de seis factores de primer orden.The scale of psychological well-being arises from the multidimensional model proposed by Ryff (1989. Despite its wide use, its initial theoretical structure has not been completely confirmed because other factorial solutions which are different from those 6 dimensions proposed by the author have been found. These differences may be related to the type of sample and population used. Given this fact, the current study compares the adjustment factor of correction models traditionally used in different groups of adults. We describe the psychometric properties of the Spanish adaptation done by Díaz et al. (2006 and analyze the levels of reliability (internal consistency and temporal stability and confirmatory factorial structure with data from 1,646 people aged from 18 to 90 years old

Factorial correlators: angular scaling within QCD jets

International Nuclear Information System (INIS)

Peschanski, R.

2001-01-01

Factorial correlators measure the amount of dynamical correlation in the multiplicity between two separated phase-space windows. We present the analytical derivation of factorial correlators for a QCD jet described at the double logarithmic (DL) accuracy. We obtain a new angular scaling property for properly normalized correlators between two solid-angle cells or two rings around the jet axis. Normalized QCD factorial correlators scale with the angular distance and are independent of the window size. Scaling violations are expected beyond the DL approximation, in particular from the subject structure. Experimental tests are feasible, and thus would be welcome. (orig.)

Factorial validation of the Attitudes toward Women Scale for Adolescents (AWSA) in assessing sexual behaviour patterns in Bolivian and Ecuadorian adolescents.

Science.gov (United States)

Jaruseviciene, Lina; De Meyer, Sara; Decat, Peter; Zaborskis, Apolinaras; Degomme, Olivier; Rojas, Mildrett; Arnold Hagens, Salazar; Auquilla, Nancy; Vega, Bernardo; Gorter, Anna C; Orozco, Miguel; Lazarus, Jeffrey V

2014-01-01

Adolescents' health is greatly influenced by social determinants, including gender norms. Although research has shown that there is an association between gender attitudes and adolescents' sexual behaviour, few studies have assessed this relationship carefully. The Attitudes toward Women Scale for Adolescents (AWSA) is widely used to assess gender attitudes among adolescents; however, to our knowledge it has not been applied in Latin America. To apply AWSA in Latin America for the first time, to perform a factorial validation of this scale and to assess the relationship of gender attitudes and sexual behaviour in Bolivian and Ecuadorian adolescents. This cross-sectional study was carried out in 2011 among 14-18 year olds in 20 high schools in Cochabamba (Bolivia) and six in Cuenca (Ecuador) as a part of a larger project. Schools were purposively selected. A Spanish version of the 12-item AWSA was employed for this study. The assessed aspects of adolescent sexual behaviour were: reported sexual intercourse, reported positive experience during last sexual intercourse and reported current use of contraception. The psychometric properties of AWSA were investigated, and both explanatory and confirmatory factorial analyses were performed. The number of questionnaires included in the analysis was 3,518 in Bolivia and 2,401 in Ecuador. A factorial analysis of AWSA resulted in three factors: power dimension (PD), equality dimension (ED) and behavioural dimension (BD). ED showed the highest correlates with adolescent sexual behaviour. Higher scores of this dimension were associated with a more positive experience of sexual relationships, a higher current use of modern contraception and greater sexual activity among girls. This study revealed a three-factorial structure of AWSA and demonstrated that by employing factors, the sensitivity of AWSA increases as compared to using the scale as a whole to assess sexual behaviour. This could have important implications for future

The Three-dimensional Digital Factory for Shipbuilding Technology Research

Directory of Open Access Journals (Sweden)

Xu Wei

2016-01-01

Full Text Available The three-dimensional digital factory technology research is the hotspot in shipbuilding recently. The three-dimensional digital factory technology not only focus on design the components of the product, but also discuss on the simulation and analyses of the production process.Based on the three-dimensional model, the basic data layer, application control layer and the presentation layer of hierarchical structure are established in the three-dimensional digital factory of shipbuilding in this paper. And the key technologies of three-dimensional digital factory of shipbuilding are analysed. Finally, a case study is applied and the results show that the three-dimensional digital factory will play an important role in the future.

Particle factories

International Nuclear Information System (INIS)

Schindler, Rafe

1989-01-01

Physicists' attention is increasingly turning to the high luminosity frontier - providing enough collisions to amass sizable numbers of rare events - to complement the traditional quest for higher energies. This month we cover three areas where projects are now being considered: Phi-factory workshop, PSI Planning for B meson factory, Tau-charm factory

Particle factories

Energy Technology Data Exchange (ETDEWEB)

Schindler, Rafe

1989-07-15

Physicists' attention is increasingly turning to the high luminosity frontier - providing enough collisions to amass sizable numbers of rare events - to complement the traditional quest for higher energies. This month we cover three areas where projects are now being considered: Phi-factory workshop, PSI Planning for B meson factory, Tau-charm factory.

Evaluating WAIS-IV structure through a different psychometric lens: structural causal model discovery as an alternative to confirmatory factor analysis.

Science.gov (United States)

van Dijk, Marjolein J A M; Claassen, Tom; Suwartono, Christiany; van der Veld, William M; van der Heijden, Paul T; Hendriks, Marc P H

Since the publication of the WAIS-IV in the U.S. in 2008, efforts have been made to explore the structural validity by applying factor analysis to various samples. This study aims to achieve a more fine-grained understanding of the structure of the Dutch language version of the WAIS-IV (WAIS-IV-NL) by applying an alternative analysis based on causal modeling in addition to confirmatory factor analysis (CFA). The Bayesian Constraint-based Causal Discovery (BCCD) algorithm learns underlying network structures directly from data and assesses more complex structures than is possible with factor analysis. WAIS-IV-NL profiles of two clinical samples of 202 patients (i.e. patients with temporal lobe epilepsy and a mixed psychiatric outpatient group) were analyzed and contrasted with a matched control group (N = 202) selected from the Dutch standardization sample of the WAIS-IV-NL to investigate internal structure by means of CFA and BCCD. With CFA, the four-factor structure as proposed by Wechsler demonstrates acceptable fit in all three subsamples. However, BCCD revealed three consistent clusters (verbal comprehension, visual processing, and processing speed) in all three subsamples. The combination of Arithmetic and Digit Span as a coherent working memory factor could not be verified, and Matrix Reasoning appeared to be isolated. With BCCD, some discrepancies from the proposed four-factor structure are exemplified. Furthermore, these results fit CHC theory of intelligence more clearly. Consistent clustering patterns indicate these results are robust. The structural causal discovery approach may be helpful in better interpreting existing tests, the development of new tests, and aid in diagnostic instruments.

Factorial validity of the Childhood Trauma Questionnaire in Italian psychiatric patients.

Science.gov (United States)

Innamorati, Marco; Erbuto, Denise; Venturini, Paola; Fagioli, Francesca; Ricci, Federica; Lester, David; Amore, Mario; Girardi, Paolo; Pompili, Maurizio

2016-11-30

Early adverse experiences are associated with neurobiological changes and these may underlie the increased risk of psychopathology. The Childhood Trauma Questionnaire (CTQ-SF) is the most commonly used instrument for assessing childhood maltreatment. Thus, the aim of our study was to investigate the factorial validity of an Italian version of the CTQ-SF in a sample of psychiatric inpatients by means of confirmatory and exploratory factor analyses. The sample was composed of 471 psychiatric in-patients and out-patients (206 males and 265 females) aged 16-80 years (mean age=34.4 years [SD=16.3]) consecutively admitted to two psychiatric departments. All patients were administered the Italian version of the CTQ-SF. We tested five different factor models which lacked good fit, while the exploratory factor analysis supported the adequacy of a solution with three factors (Emotional Neglect/Abuse, Sexual Abuse, Physical Neglect/Abuse). The three factors had satisfactory internal consistency (ordinal Cronbach alphas >0.90). Our study supports results from previous research indicating the lack of structural invariance of the CTQ-SF in cross-cultural adaptations of the test, and the fact that, when measuring different types of childhood maltreatment, the difference between abuse and neglect may be not valid. Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.

Confirmatory Factor Analysis of the WISC-IV in a Hospital Referral Sample

Science.gov (United States)

Devena, Sarah E.; Gay, Catherine E.; Watkins, Marley W.

2013-01-01

Confirmatory factor analysis was used to determine the factor structure of the Wechsler Intelligence Scale for Children-Fourth Edition (WISC-IV) scores of 297 children referred to a children's hospital in the Southwestern United States. Results support previous findings that indicate the WISC-IV is best represented by a direct hierarchical…

Fractional factorial plans

CERN Document Server

Dey, Aloke

2009-01-01

A one-stop reference to fractional factorials and related orthogonal arrays.Presenting one of the most dynamic areas of statistical research, this book offers a systematic, rigorous, and up-to-date treatment of fractional factorial designs and related combinatorial mathematics. Leading statisticians Aloke Dey and Rahul Mukerjee consolidate vast amounts of material from the professional literature--expertly weaving fractional replication, orthogonal arrays, and optimality aspects. They develop the basic theory of fractional factorials using the calculus of factorial arrangements, thereby providing a unified approach to the study of fractional factorial plans. An indispensable guide for statisticians in research and industry as well as for graduate students, Fractional Factorial Plans features: * Construction procedures of symmetric and asymmetric orthogonal arrays. * Many up-to-date research results on nonexistence. * A chapter on optimal fractional factorials not based on orthogonal arrays. * Trend-free plans...

Exploratory and Confirmatory Factor Analyses of the WISC-IV with Gifted Students

Science.gov (United States)

Rowe, Ellen W.; Dandridge, Jessica; Pawlush, Alexandra; Thompson, Dawna F.; Ferrier, David E.

2014-01-01

These 2 studies investigated the factor structure of the Wechsler Intelligence Scale for Children-4th edition (WISC-IV; Wechsler, 2003a) with exploratory factor analysis (EFA; Study 1) and confirmatory factor analysis (CFA; Study 2) among 2 independent samples of gifted students. The EFA sample consisted of 225 children who were referred for a…

Safeguards uses of confirmatory measurements

International Nuclear Information System (INIS)

Coulter, C.A.

1985-01-01

An analysis is made of the role of shipper and receiver measurements in safeguarding special nuclear materials (SNM) transferred from one facility to another, with emphasis on the case where the receiver requires an analytical accounting measurement of the transferred SNM and does not need the material for process purposes at the time of receipt. Seven possible diversion periods are considered, ranging from the interval between the shipper's final accounting measurement on the material and the time it is placed in the shipper's vault, through the actual transport of the material between facilities, to the time the material is removed from the receiver's vault and placed in the process. The detection power of various combinations of six possible shipper/receiver measurements for these diversion opportunities is then evaluated; the measurements considered include the shipper's and receiver's accounting measurements, the latter at two possible times, and various nondestructive assay (NDA) confirmatory measurements. It is concluded that all safeguards measurement objectives can be met by a combination of a shipper's accounting measurement at the time the material is removed from the process, an appropriate shipper's NDA confirmatory measurement either immediately after canning or immediately before shipping, an equivalent receiver's NDA confirmatory measurement immediately after the material is received, and a receiver's accounting measurement when the material is placed in the process. Furthermore, it is found that a receiver's analytical accounting measurement immediately after receipt when the material is not yet required for process has dubious safeguards value

Psychometric examination and factorial validity of the Exercise Dependence Scale-Revised in Italian exercisers.

Science.gov (United States)

Costa, Sebastiano; Cuzzocrea, Francesca; Hausenblas, Heather A; Larcan, Rosalba; Oliva, Patrizia

2012-12-01

Background and aims The purpose of this study was to verify the factorial structure, internal validity, reliability, and criterion validity of the 21-item Exercise Dependence Scale-Revised (EDS-R) in an Italian sample. Methods Italian voluntary (N = 519) users of gyms who had a history of regular exercise for over a year completed the EDS-R and measures of exercise frequency. Results and conclusions Confirmatory factor analyses demonstrated a good fit to the hypothesized 7-factor model, and adequate internal consistency for the scale was evidenced. Criterion validity was evidenced by significant correlations among all the subscale of the EDS and exercise frequency. Finally, individuals at risk for exercise dependence reported more exercise behavior compared to the nondependent-symptomatic and nondependent-asymptomatic groups. These results suggest that the seven subscales of the Italian version of the EDS are measuring the construct of exercise dependence as defined by the DSM-IV criteria for substance dependence and also confirm previous research using the EDS-R in other languages. More research is needed to examine the psychometric properties of the EDS-R in diverse populations with various research designs.

Engineering the smart factory

Science.gov (United States)

Harrison, Robert; Vera, Daniel; Ahmad, Bilal

2016-10-01

The fourth industrial revolution promises to create what has been called the smart factory. The vision is that within such modular structured smart factories, cyber-physical systems monitor physical processes, create a virtual copy of the physical world and make decentralised decisions. This paper provides a view of this initiative from an automation systems perspective. In this context it considers how future automation systems might be effectively configured and supported through their lifecycles and how integration, application modelling, visualisation and reuse of such systems might be best achieved. The paper briefly describes limitations in current engineering methods, and new emerging approaches including the cyber physical systems (CPS) engineering tools being developed by the automation systems group (ASG) at Warwick Manufacturing Group, University of Warwick, UK.

Revised-Confirmatory Survey Report for Portions of the Auxiliary Building Structural Surfaces and Turbine Building Embedded Piping, Rancho Seco Nuclear Generating Station, Herald, California

International Nuclear Information System (INIS)

W. C. Adams

2007-01-01

During the period of October 15 and 18, 2007, ORISE performed confirmatory radiological survey activities which included beta and gamma structural surface scans and beta activity direct measurements within the Auxiliary Building, beta or gamma scans within Turbine Building embedded piping, beta activity determinations within Turbine Building Drain 3-1-27, and gamma scans and the collection of a soil sample from the clay soils adjacent to the Lower Mixing Box

AutoPyFactory: A Scalable Flexible Pilot Factory Implementation

International Nuclear Information System (INIS)

Caballero, J; Hover, J; Love, P; Stewart, G A

2012-01-01

The ATLAS experiment at the CERN LHC is one of the largest users of grid computing infrastructure, which is a central part of the experiment's computing operations. Considerable efforts have been made to use grid technology in the most efficient and effective way, including the use of a pilot job based workload management framework. In this model the experiment submits ‘pilot’ jobs to sites without payload. When these jobs begin to run they contact a central service to pick-up a real payload to execute. The first generation of pilot factories were usually specific to a single Virtual Organization (VO), and were bound to the particular architecture of that VO's distributed processing. A second generation provides factories which are more flexible, not tied to any particular VO, and provide new and improved features such as monitoring, logging, profiling, etc. In this paper we describe this key part of the ATLAS pilot architecture, a second generation pilot factory, AutoPyFactory. AutoPyFactory has a modular design and is highly configurable. It is able to send different types of pilots to sites and exploit different submission mechanisms and queue characteristics. It is tightly integrated with the PanDA job submission framework, coupling pilot flow to the amount of work the site has to run. It gathers information from many sources in order to correctly configure itself for a site and its decision logic can easily be updated. Integrated into AutoPyFactory is a flexible system for delivering both generic and specific job wrappers which can perform many useful actions before starting to run end-user scientific applications, e.g., validation of the middleware, node profiling and diagnostics, and monitoring. AutoPyFactory also has a robust monitoring system that has been invaluable in establishing a reliable pilot factory service for ATLAS.

A Confirmatory Factor Analysis of the Academic Motivation Scale with Black College Students

Science.gov (United States)

Cokley, Kevin

2015-01-01

The factor structure of the Academic Motivation Scale (AMS) was examined with a sample of 578 Black college students. A confirmatory factor analysis of the AMS was conducted. Results indicated that the hypothesized seven-factor model did not fit the data. Implications for future research with the AMS are discussed.

A biophysical model for transcription factories

International Nuclear Information System (INIS)

Canals-Hamann, Ana Z; Neves, Ricardo Pires das; Reittie, Joyce E; Iñiguez, Carlos; Soneji, Shamit; Enver, Tariq; Buckle, Veronica J; Iborra, Francisco J

2013-01-01

Transcription factories are nuclear domains where gene transcription takes place although the molecular basis for their formation and maintenance are unknown. In this study, we explored how the properties of chromatin as a polymer may contribute to the structure of transcription factories. We found that transcriptional active chromatin contains modifications like histone H4 acetylated at Lysine 16 (H4K16ac). Single fibre analysis showed that this modification spans the entire body of the gene. Furthermore, H4K16ac genes cluster in regions up to 500 Kb alternating active and inactive chromatin. The introduction of H4K16ac in chromatin induces stiffness in the chromatin fibre. The result of this change in flexibility is that chromatin could behave like a multi-block copolymer with repetitions of stiff-flexible (active-inactive chromatin) components. Copolymers with such structure self-organize through spontaneous phase separation into microdomains. Consistent with such model H4K16ac chromatin form foci that associates with nascent transcripts. We propose that transcription factories are the result of the spontaneous concentration of H4K16ac chromatin that are in proximity, mainly in cis

Experience with confirmatory measurements at the Savannah River Plant

International Nuclear Information System (INIS)

Deason, P.T.; Cadieux, J.R.; Denard, C.D.

1985-01-01

Confirmatory measurements are performed on all category I and II plutonium shipments to the Savannah River Plant (SRP). The primary technique employed has been neutron coincidence counting using three instruments; two slab counters, and a well counter. These measurements have provided the required safeguards features to support the physical security measures already in place for inter-site shipments of special nuclear material (SNM). Similar confirmatory measurements have also been performed on a variety of scrap mixed-oxide materials stored at SRP for later processing. The data handling and results for several categories of material will be examined in addition to planned uses of the Rocky Flats Plant (RFP)/SRP Confirmatory Measurements Counter (CMC). 2 refs., 4 figs

Questionário de Saúde Geral (QSG-12: o efeito de itens negativos em sua estrutura fatorial General Health Questionnaire (GHQ-12: the effect of negative items in its factorial structure

Directory of Open Access Journals (Sweden)

Valdiney V. Gouveia

2012-02-01

Full Text Available O Questionário de Saúde Geral (QSG-12 detecta doenças psiquiátricas não severas. Embora comumente tratado como um índice geral, a definição de sua estrutura fatorial suscita debates. Este trabalho objetivou testar tal estrutura, comparando três modelos: dois frequentemente citados na literatura (uni e bifatorial e um terceiro, também unifatorial, que controla o viés de resposta devido à redação dos itens. Participaram 1.180 pessoas (300 estudantes universitários; 311 policiais militares; 274 professores do ensino fundamental; e 295 membros da população em geral, que responderam ao QSG-12 e perguntas demográficas. Análises fatoriais confirmatórias apontaram que a estrutura unifatorial, controlando o efeito dos itens negativos, reuniu os melhores índices de ajuste, excetuando entre os militares. Essa estrutura apresentou consistência interna superior a 0,80 em todos os grupos. Concluiu-se que o QSG-12 é mais adequado como unifatorial, embora se indique a necessidade de estudos futuros com pessoas de profissões e níveis de saúde mental diferentes.The General Health Questionnaire (GHQ-12 detects non severe psychiatric illnesses. Although commonly treated as a general index, the definition of its factorial structure is cause for debate. This study aimed to test this structure comparing three models: two frequently cited in the literature (one- and t bi- factorial and a third, also one-factor, which controls response bias due to the negative wording of items. A total of 1,180 people participated (300 undergraduates, 311 military policemen, 274 elementary school teachers and 295 members of the general population answering the GHQ-12 and demographic questions. Confirmatory factor analyses showed that the one-factor structure, controlling by the wording effect, gathered the best fit indexes, except among the military. This structure showed greater than0.80 reliability in all groups. It was concluded that the one-factor model of

AutoPyFactory: A Scalable Flexible Pilot Factory Implementation

CERN Document Server

Caballero, J; The ATLAS collaboration; Love, P; Stewart, G

2012-01-01

The ATLAS experiment at the CERN LHC is one of the largest users of grid computing infrastructure, which is a central part of the experiment’s computing operations. Considerable efforts have been made to use grid technology in the most efficient and effective way, including the use of a pilot job based workload management framework. In this model the experiment submits ’pilot’ jobs to sites without payload. When these jobs begin to run they contact a central service to retrieve a real payload to execute. The first generation of pilot factories were usually specific to a single VO, and were bound to the particular architecture of that VO’s distributed processing. A second generation provides factories which are more flexible, not tied to any particular VO, and provide new or improved features such as monitoring, logging, profiling, etc. In this paper we describe this key part of the ATLAS pilot architecture, a second generation pilot factory, AutoPyFactory. AutoPyFactory has a modular design and is hig...

A confirmatory test of the underlying factor structure of scores on the collective self-esteem scale in two independent samples of Black Americans.

Science.gov (United States)

Utsey, Shawn O; Constantine, Madonna G

2006-04-01

In this study, we examined the factor structure of the Collective Self-Esteem Scale (CSES; Luhtanen & Crocker, 1992) across 2 separate samples of Black Americans. The CSES was administered to a sample of Black American adolescents (n = 538) and a community sample of Black American adults (n = 313). Results of confirmatory factor analyses (CFAs), however, did not support the original 4-factor model identified by Luhtanen and Crocker (1992) as providing an adequate fit to the data for these samples. Furthermore, an exploratory CFA procedure failed to find a CSES factor structure that could be replicated across the 2 samples of Black Americans. We present and discuss implications of the findings.

Multigroup confirmatory factor analysis and structural invariance with age of the Behavior Rating Inventory of Executive Function (BRIEF)--French version.

Science.gov (United States)

Fournet, Nathalie; Roulin, Jean-Luc; Monnier, Catherine; Atzeni, Thierry; Cosnefroy, Olivier; Le Gall, Didier; Roy, Arnaud

2015-01-01

The parent and teacher forms of the French version of the Behavioral Rating Inventory of Executive Function (BRIEF) were used to evaluate executive function in everyday life in a large sample of healthy children (N = 951) aged between 5 and 18. Several psychometric methods were applied, with a view to providing clinicians with tools for score interpretation. The parent and teacher forms of the BRIEF were acceptably reliable. Demographic variables (such as age and gender) were found to influence the BRIEF scores. Confirmatory factor analysis was then used to test five competing models of the BRIEF's latent structure. Two of these models (a three-factor model and a two-factor model, both based on a nine-scale structure) had a good fit. However, structural invariance with age was only obtained with the two-factor model. The French version of the BRIEF provides a useful measure of everyday executive function and can be recommended for use in clinical research and practice.

Factory physics

CERN Document Server

Hopp, Wallace J.

2011-01-01

After a brief introductory chapter, "Factory Physics 3/e" is divided into three parts: I - The Lessons of History; II - Factory Physics; and III - Principles in Practice. The scientific approach to manufacturing and supply chain management, developed in Part II, is unique to this text. No other text or professional book provides a rigorous, principles-based foundation for manufacturing management. The Third Edition offers tighter connections between Lean Manufacturing, MRP/ERP, Six Sigma, Supply Chain Management, and Factory Physics. In addition to enhancing the historical overview of how these systems evolved, the authors show explicitly how users can achieve Lean Manufacturing objectives (faster response, less inventory) using the integration aspects of MRP/ERP/SCM systems along with the variance analysis methods of Six Sigma. Factory Physics provides the overarching framework that coordinates all of these initiatives into a single-focused strategy.

Development of Physical Activity-Related Parenting Practices Scales for Urban Chinese Parents of Preschoolers: Confirmatory Factor Analysis and Reliability.

Science.gov (United States)

Suen, Yi-Nam; Cerin, Ester; Barnett, Anthony; Huang, Wendy Y J; Mellecker, Robin R

2017-09-01

Valid instruments of parenting practices related to children's physical activity (PA) are essential to understand how parents affect preschoolers' PA. This study developed and validated a questionnaire of PA-related parenting practices for Chinese-speaking parents of preschoolers in Hong Kong. Parents (n = 394) completed a questionnaire developed using findings from formative qualitative research and literature searches. Test-retest reliability was determined on a subsample (n = 61). Factorial validity was assessed using confirmatory factor analysis. Subscale internal consistency was determined. The scale of parenting practices encouraging PA comprised 2 latent factors: Modeling, structure and participatory engagement in PA (23 items), and Provision of appropriate places for child's PA (4 items). The scale of parenting practices discouraging PA scale encompassed 4 latent factors: Safety concern/overprotection (6 items), Psychological/behavioral control (5 items), Promoting inactivity (4 items), and Promoting screen time (2 items). Test-retest reliabilities were moderate to excellent (0.58 to 0.82), and internal subscale reliabilities were acceptable (0.63 to 0.89). We developed a theory-based questionnaire for assessing PA-related parenting practices among Chinese-speaking parents of Hong Kong preschoolers. While some items were context and culture specific, many were similar to those previously found in other populations, indicating a degree of construct generalizability across cultures.

Factorial complexity and Morally Debatable Behaviors

Directory of Open Access Journals (Sweden)

Grimaldo Muchotrigo, Mirian P.

2011-12-01

Full Text Available Currently, from the scientific and professional practice point of view, comes out the necessity to know more about moral permissiveness, as it seems to be an increase in “moral relativism”.. Because it, it this is important to have tools to collect valid and reliable information about moral in social situations defined as social and personal behavior issue. This paper presents a technical note of The Morally Debatable Behaviors Scale (MDBS from Harding & Phillips (1986, which was developed in USA and mainly focused on young people and adults. This technical note makes direct reference to a recent Latin American study (Merino & Grimaldo, 2010; this article focuses on the internal structure and the problems associated with evidences of factorial complexity among items of the MDBS. This means that the interpretation of scores is not factorially simple and could not be achieved by a conceptual distinction between the latent constructs applied to the study sample.. The results in the previous study of the factorial complexity leads the researcher to decide whether an instrument for measuring this aspect may contain a reasonable amount of complexity that is consistent with what is in reality, or look for the unidimensional and simple structure.

Factorial validation of the Attitudes toward Women Scale for Adolescents (AWSA in assessing sexual behaviour patterns in Bolivian and Ecuadorian adolescents

Directory of Open Access Journals (Sweden)

Lina Jaruseviciene

2014-01-01

Full Text Available Background: Adolescents’ health is greatly influenced by social determinants, including gender norms. Although research has shown that there is an association between gender attitudes and adolescents’ sexual behaviour, few studies have assessed this relationship carefully. The Attitudes toward Women Scale for Adolescents (AWSA is widely used to assess gender attitudes among adolescents; however, to our knowledge it has not been applied in Latin America. Objective: To apply AWSA in Latin America for the first time, to perform a factorial validation of this scale and to assess the relationship of gender attitudes and sexual behaviour in Bolivian and Ecuadorian adolescents. Design: This cross-sectional study was carried out in 2011 among 14–18 year olds in 20 high schools in Cochabamba (Bolivia and six in Cuenca (Ecuador as a part of a larger project. Schools were purposively selected. A Spanish version of the 12-item AWSA was employed for this study. The assessed aspects of adolescent sexual behaviour were: reported sexual intercourse, reported positive experience during last sexual intercourse and reported current use of contraception. The psychometric properties of AWSA were investigated, and both explanatory and confirmatory factorial analyses were performed. Results: The number of questionnaires included in the analysis was 3,518 in Bolivia and 2,401 in Ecuador. A factorial analysis of AWSA resulted in three factors: power dimension (PD, equality dimension (ED and behavioural dimension (BD. ED showed the highest correlates with adolescent sexual behaviour. Higher scores of this dimension were associated with a more positive experience of sexual relationships, a higher current use of modern contraception and greater sexual activity among girls. Conclusions: This study revealed a three-factorial structure of AWSA and demonstrated that by employing factors, the sensitivity of AWSA increases as compared to using the scale as a whole to

Survivor shielding. Part A. Nagasaki factory worker shielding

International Nuclear Information System (INIS)

Santoro, Robert T.; Barnes, John M.; Azmy, Yousry Y.; Kerr, George D.; Egbert, Stephen D.; Cullings, Harry M.

2005-01-01

Recent investigations based on conventional chromosome aberration data by the RERF suggest that the DS86 doses received by many Nagasaki factory workers may have been overestimated by as much as 40% relative to those for other survivors in Japanese-type houses and other shielding configurations (Kodama et al. 2001). Since the factory workers represent about 25% of the Nagasaki survivors with DS86 doses in excess of 0.5 Gy (50 rad), systematic errors in their dose estimates can have a major impact on the risk coefficients from RERF studies. The factory worker doses may have been overestimated for a number of reasons. The calculation techniques, including the factory building modeling, weapon source spectra and cross-section data used in the DS86 shielding calculations were not detailed enough to replicate actual conditions. The models used did not take into account local shielding provided by machinery, tools, and the internal structure in the buildings. In addition, changes in the disposition of shielding following collapse of the building by the blast wave were not considered. The location of large factory complexes may be uncertain, causing large numbers of factory survivors, correctly located relative to each other, to be uniformly too close to the hypocenter. Any or all of these reasons are sufficient to result in an overestimate of the factory worker doses. During the DS02 studies, factory worker doses have been reassessed by more carefully modeling the factory buildings, incorporating improved radiation transport methods and cross-section data and using the most recent bomb leakage spectra (Chapter 2). Two-dimensional discrete ordinates calculations were carried out initially to estimate the effects of workbenches and tools on worker doses to determine if the inclusion of these components would, in fact, reduce the dose by amounts consistent with the RERF observations (Kodama et al. 2001). (author)

Cell Factory Engineering

DEFF Research Database (Denmark)

Davy, Anne Mathilde; Kildegaard, Helene Faustrup; Andersen, Mikael Rørdam

2017-01-01

focused on individual strategies or cell types, but collectively they fall under the broad umbrella of a growing field known as cell factory engineering. Here we condense >130 reviews and key studies in the art into a meta-review of cell factory engineering. We identified 33 generic strategies......-review provides general strategy guides for the broad range of applications of rational engineering of cell factories....

Internal Structure and Partial Invariance across Gender in the Spanish Version of the Reasoning Test Battery.

Science.gov (United States)

Elosua, Paula; Mujika, Josu

2015-10-13

The Reasoning Test Battery (BPR) is an instrument built on theories of the hierarchical organization of cognitive abilities and therefore consists of different tasks related with abstract, numerical, verbal, practical, spatial and mechanical reasoning. It was originally created in Belgium and later adapted to Portuguese. There are three forms of the battery consisting of different items and scales which cover an age range from 9 to 22. This paper focuses on the adaptation of the BPR to Spanish, and analyzes different aspects of its internal structure: (a) exploratory item factor analysis was applied to assess the presence of a dominant factor for each partial scale; (b) the general underlined model was evaluated through confirmatory factor analysis, and (c) factorial invariance across gender was studied. The sample consisted of 2624 Spanish students. The results concluded the presence of a general factor beyond the scales, with equivalent values for men and women, and gender differences in the factorial structure which affect the numerical reasoning, abstract reasoning and mechanical reasoning scales.

Confirmatory Factor Analysis in the study of the Structure and Stability of Assessment Instruments: An example with the Self-Esteem Questionnaire (CA-14

Directory of Open Access Journals (Sweden)

Juan Herrero

2010-12-01

Full Text Available This research presents a study of the factor structure and temporal stability of the Self-Esteem Questionnaire (CA-14 using Confirmatory Factor Analysis (CFA techniques. The paper pretends to offer a potential guide to researchers, paying special attention to data requirements, estimation methods suggested in the literature, recommended fit indices and other circumstances that need to be taken into account when estimating CFA models. Also, various methodological strategies are shown during the implementation of CFA models: correlated errors, use of parameter constraints, multigroup analysis, etc.

European Organization for Research and Treatment of Cancer Quality of Life Questionnaire Core 30: factorial models to Brazilian cancer patients

Science.gov (United States)

Campos, Juliana Alvares Duarte Bonini; Spexoto, Maria Cláudia Bernardes; da Silva, Wanderson Roberto; Serrano, Sergio Vicente; Marôco, João

2018-01-01

ABSTRACT Objective To evaluate the psychometric properties of the seven theoretical models proposed in the literature for European Organization for Research and Treatment of Cancer Quality of Life Questionnaire Core 30 (EORTC QLQ-C30), when applied to a sample of Brazilian cancer patients. Methods Content and construct validity (factorial, convergent, discriminant) were estimated. Confirmatory factor analysis was performed. Convergent validity was analyzed using the average variance extracted. Discriminant validity was analyzed using correlational analysis. Internal consistency and composite reliability were used to assess the reliability of instrument. Results A total of 1,020 cancer patients participated. The mean age was 53.3±13.0 years, and 62% were female. All models showed adequate factorial validity for the study sample. Convergent and discriminant validities and the reliability were compromised in all of the models for all of the single items referring to symptoms, as well as for the “physical function” and “cognitive function” factors. Conclusion All theoretical models assessed in this study presented adequate factorial validity when applied to Brazilian cancer patients. The choice of the best model for use in research and/or clinical protocols should be centered on the purpose and underlying theory of each model. PMID:29694609

The Factorial Structure Study of the Positive Personality Traits Questionnaire for Chinese College Students%积极人格特质问卷PPTQ在中国大学生中的因素结构研究

Institute of Scientific and Technical Information of China (English)

孙妍; 郑静; 胡朝兵

2013-01-01

The factorial structure of Positive Personality Traits Questionnaire (PPTQ) in a sample of Chinese college students is explored. A total of 648 college students are recruited for this study;half of the samples are used for exploratory factor analysis and the others for confirmatory factor analysis. Exploratory factor analysis shows positive self image, extraversion and culture identification. The results of confirmatory factor analysis (χ2/df=2.230, GFI=0.841, AGFI=0.816, CFI=0.822, RMSEA=0.062) indicates that this model provides a reasonable good fit for Chinese college students. The study indicates that the three-factor model of PPTQ is adaptable to Chinese college students.%　　探索积极人格特质问卷（PPTQ）在中国大学生中的因素结构。采用积极人格特质问卷（Positive Personality Traits Questionnaire）中文版，对648名大学生施测，对其中一半数据使用PASWStatistics18进行探索性因素分析，另一半数据使用AMOS16.0进行验证性因素分析（CFA）。探索性因素分析得出积极自我意象、外向性和文化认同三因素结构。累计解释率为50.457%，验证性因素分析结果显示：χ2/df=2.230，GFI=0.841。AGFI=0.816，CFI=0.822，RMSEA=0.062，中文版三因素结构在中国大学生人群中较为合理。

Tau-charm factory..

Energy Technology Data Exchange (ETDEWEB)

Anon.

1995-10-15

In addition to hearing the latest experimental and theoretical developments at the 17th International Symposium on Lepton Photon Interactions in Beijing, delegates were brought up-to-date on the substantial progress towards the realization of a Tau-Charm Factory in the Chinese capital. Opening the Symposium, Zhou Guangzhao, President of the Chinese Academy of Sciences, expressed a commitment of the Chinese government to basic research and its interest in the continuing development high energy physics in China. Following the very successful construction and operation of Beijing's Electron-Positron Collider, BEPC, the Chinese government has provided 5M yuan ($US 600,000) for a feasibility study by the end of 1996 for a Tau-Charm Factory at Beijing's Institute of High Energy Physics (IHEP). Professor Zhou expressed his belief that, once approved, such a factory would greatly enhance high energy physics in China. He warmly welcomed international collaboration both in the construction of the accelerator and in the experimental programme. His comments were reinforced in the following welcome speech by IHEP Director Zheng Zhipeng. Conference delegates had the opportunity to inspect the BEPC injector and collider, built almost entirely by Chinese industry. The International Committee for Future Accelerators (ICFA) met during the Symposium, with Tau- Charm Factory business on the agenda. In his subsequent report, ICFA Chairman John Peoples said that a Tau-Charm Factory provides a unique experimental environment for the precision studies of tau, charm and light quark-gluon spectroscopy, and that some issues in these fields are not satisfactorily addressed solely by B Factories or fixed-target experiments. The committee expressed a strong interest in seeing a Tau-Charm Factory built and noted the serious interest, especially in China, and looks forward to operation and exploitation by the international physics community. In their Beijing summary talks, both Sam Ting and T

Tau-charm factory..

International Nuclear Information System (INIS)

Anon.

1995-01-01

In addition to hearing the latest experimental and theoretical developments at the 17th International Symposium on Lepton Photon Interactions in Beijing, delegates were brought up-to-date on the substantial progress towards the realization of a Tau-Charm Factory in the Chinese capital. Opening the Symposium, Zhou Guangzhao, President of the Chinese Academy of Sciences, expressed a commitment of the Chinese government to basic research and its interest in the continuing development high energy physics in China. Following the very successful construction and operation of Beijing's Electron-Positron Collider, BEPC, the Chinese government has provided 5M yuan ($US 600,000) for a feasibility study by the end of 1996 for a Tau-Charm Factory at Beijing's Institute of High Energy Physics (IHEP). Professor Zhou expressed his belief that, once approved, such a factory would greatly enhance high energy physics in China. He warmly welcomed international collaboration both in the construction of the accelerator and in the experimental programme. His comments were reinforced in the following welcome speech by IHEP Director Zheng Zhipeng. Conference delegates had the opportunity to inspect the BEPC injector and collider, built almost entirely by Chinese industry. The International Committee for Future Accelerators (ICFA) met during the Symposium, with Tau- Charm Factory business on the agenda. In his subsequent report, ICFA Chairman John Peoples said that a Tau-Charm Factory provides a unique experimental environment for the precision studies of tau, charm and light quark-gluon spectroscopy, and that some issues in these fields are not satisfactorily addressed solely by B Factories or fixed-target experiments. The committee expressed a strong interest in seeing a Tau-Charm Factory built and noted the serious interest, especially in China, and looks forward to operation and exploitation by the international physics community. In their Beijing summary talks, both Sam Ting

Operating a production pilot factory serving several scientific domains

Science.gov (United States)

Sfiligoi, I.; Würthwein, F.; Andrews, W.; Dost, J. M.; MacNeill, I.; McCrea, A.; Sheripon, E.; Murphy, C. W.

2011-12-01

Pilot infrastructures are becoming prominent players in the Grid environment. One of the major advantages is represented by the reduced effort required by the user communities (also known as Virtual Organizations or VOs) due to the outsourcing of the Grid interfacing services, i.e. the pilot factory, to Grid experts. One such pilot factory, based on the glideinWMS pilot infrastructure, is being operated by the Open Science Grid at University of California San Diego (UCSD). This pilot factory is serving multiple VOs from several scientific domains. Currently the three major clients are the analysis operations of the HEP experiment CMS, the community VO HCC, which serves mostly math, biology and computer science users, and the structural biology VO NEBioGrid. The UCSD glidein factory allows the served VOs to use Grid resources distributed over 150 sites in North and South America, in Europe, and in Asia. This paper presents the steps taken to create a production quality pilot factory, together with the challenges encountered along the road.

Operating a production pilot factory serving several scientific domains

International Nuclear Information System (INIS)

Sfiligoi, I; Würthwein, F; Andrews, W; Dost, J M; MacNeill, I; McCrea, A; Sheripon, E; Murphy, C W

2011-01-01

Pilot infrastructures are becoming prominent players in the Grid environment. One of the major advantages is represented by the reduced effort required by the user communities (also known as Virtual Organizations or VOs) due to the outsourcing of the Grid interfacing services, i.e. the pilot factory, to Grid experts. One such pilot factory, based on the glideinWMS pilot infrastructure, is being operated by the Open Science Grid at University of California San Diego (UCSD). This pilot factory is serving multiple VOs from several scientific domains. Currently the three major clients are the analysis operations of the HEP experiment CMS, the community VO HCC, which serves mostly math, biology and computer science users, and the structural biology VO NEBioGrid. The UCSD glidein factory allows the served VOs to use Grid resources distributed over 150 sites in North and South America, in Europe, and in Asia. This paper presents the steps taken to create a production quality pilot factory, together with the challenges encountered along the road.

Sustainable Manufacturing Practices in Malaysian Automotive Industry: Confirmatory Factor Analysis

OpenAIRE

Habidin, Nurul Fadly; Zubir, Anis Fadzlin Mohd; Fuz, Nursyazwani Mohd; Latip, Nor Azrin Md; Azman, Mohamed Nor Azhari

2015-01-01

Sustainable manufacturing practices (SMPs) have received enormous attention in current years as an effective solution to support the continuous growth and expansion of the automotive manufacturing industry. This reported study was conducted to examine confirmatory factor analysis for SMP such as manufacturing process, supply chain management, social responsibility, and environmental management based on automotive manufacturing industry. The results of confirmatory factor analysis show that fo...

Establishing a Measurement Tool for a Nursing Work Environment in Taiwan.

Science.gov (United States)

Lin, Li-Chiu; Lee, Huan-Fang; Yen, Miaofen

2017-02-01

The nursing work environment is a critical global health care problem. Many health care providers are concerned about the associations between the nursing work environment and the outcomes of organizations, nurses, and patients. Nursing work environment instruments have been assessed in the West but have not been considered in Asia. However, different cultures will affect the factorial structure of the tool. Using a stratified nationwide random sample, we created a measurement tool for the nursing work environment in Taiwan. The Nursing Work Environment Index-Revised Scale and the Essentials of Magnetism scale were used to examine the factorial structure. Item analysis, exploratory factor analysis, and confirmatory factor analysis were used to examine the hypothesis model and generate a new factorial structure. The Taiwan Nursing Work Environment Index (TNWEI) was established to evaluate the nursing work environment in Taiwan. The four factors were labeled "Organizational Support" (7 items), "Nurse Staffing and Resources" (4 items), "Nurse-Physician Collaboration" (4 items), and "Support for Continuing Education" (4 items). The 19 items explained 58.5% of the variance. Confirmatory factor analysis showed a good fit to the model (x2/df = 5.99; p nurses' work environment in Taiwan.

One, two or three dimensions of work engagement? Testing the factorial validity of the Utrecht Work Engagement Scale on a sample of Polish employees.

Science.gov (United States)

Kulikowski, Konrad

2017-10-11

Work engagement, as conceptualized by the Utrecht Work Engagement Scale (UWES), is a work-related positive state of mind that is characterized by vigour, dedication and absorption; however, it still remains unclear how many dimensions work engagement comprises. This study tested the factorial validity of 11 different UWES factorial models that are available in the literature using a confirmatory factor analysis approach on a large sample of multi-occupational Polish employees (N = 1420). The two-factor UWES-6, comprising vigour and dedication, was found to be reliable and remained invariant across samples drawn from four different organizational positions. It also presented a better fit than the three-factor UWES-9, which is a scale used as a standard in contemporary research on work engagement. The findings suggest that the three-factor UWES-9 might not be an optimal measure of work engagement in Poland.

Effects of Informative and Confirmatory Feedback on Brain Activation During Negative Feedback Processing

Directory of Open Access Journals (Sweden)

Yeon-Kyoung eWoo

2015-06-01

Full Text Available The current study compared the effects of informative and confirmatory feedback on brain activation during negative feedback processing. For confirmatory feedback trials, participants were informed that they had failed the task, whereas informative feedback trials presented task relevant information along with the notification of their failure. Fourteen male undergraduates performed a series of spatial-perceptual tasks and received feedback while their brain activity was recorded. During confirmatory feedback trials, greater activations in the amygdala, dorsal anterior cingulate cortex, and the thalamus (including the habenular were observed in response to incorrect responses. These results suggest that confirmatory feedback induces negative emotional reactions to failure. In contrast, informative feedback trials elicited greater activity in the dorsolateral prefrontal cortex (DLPFC when participants experienced failure. Further psychophysiological interaction (PPI analysis revealed a negative coupling between the DLPFC and the amygdala during informative feedback relative to confirmatory feedback trials. These findings suggest that providing task-relevant information could facilitate implicit down-regulation of negative emotions following failure.

NRC Confirmatory Testing Program for SBWR

International Nuclear Information System (INIS)

Han, J.T.; Bessette, D.E.; Shotkin, L.M.

1994-01-01

The objective of the NRC Confirmatory Testing Program for SBWR is to provide integral data for code assessment, which reasonably reproduce the important phenomena and processes expected in the SBWR under various loss-of-coolant accident (LOCA) and transient conditions. To achieve this objective, the Program consists of four coupled elements: (1) to design and construct an integral, carefully-scaled SBWR test facility at Purdue Univ., (2) to provide pre-construction RELAP5/CONTAIN predictions of the facility design, (3) to provide confirmatory data for code assessment, and (4) to assess the RELAP5/CONTAIN code with data. A description of the open-quotes preliminary designclose quotes of the Purdue test facility and test matrix is presented. The facility is scheduled to be built by December 1994. Approximately 50 tests will be performed from April 1995 through April 1996 and documented by interim data reports. A final and complete data report is scheduled to be published by July 31, 1996

Factorial composition of the Aggression Questionnaire: a multi-sample study in Greek adults.

Science.gov (United States)

Vitoratou, Silia; Ntzoufras, Ioannis; Smyrnis, Nikolaos; Stefanis, Nicholas C

2009-06-30

The primary aim of the current article was the evaluation of the factorial composition of the Aggression Questionnaire (AQ(29)) in the Greek population. The translated questionnaire was administered to the following three heterogeneous adult samples: a general population sample from Athens, a sample of young male conscripts and a sample of individuals facing problems related to substance use. Factor analysis highlighted a structure similar to the one proposed by Buss and Perry [Buss, A.F., Perry, M., 1992. The Aggression Questionnaire. Journal of Personality and Social Psychology 63, 452-459]. However, the refined 12-item version of Bryant and Smith [Bryant, F.B., Smith, B.D., 2001. Refining the architecture of aggression: a measurement model for the Buss-Perry Aggression Questionnaire. Journal of Research in Personality 35, 138-167] provided a better fit to our data. Therefore, the refined model was implemented in further analysis. Multiple group confirmatory factor analysis was applied in order to assess the variability of the 12-item AQ across gender and samples. The percentage of factor loading invariance between males and females and across the three samples defined above was high (higher than 75%). The reliability (internal consistency) of the scale was satisfactory in all cases. Content validity of the 12-item AQ was confirmed by comparison with the Symptom Check-List 90 Revised.

When conflicts are good: nonconscious goal conflicts reduce confirmatory thinking.

Science.gov (United States)

Kleiman, Tali; Hassin, Ran R

2013-09-01

In this article, we argue that nonconscious goal conflicts are accompanied by a mindset that has wide-ranging implications for reasoning and thinking in content areas that are not part of the conflict itself. Specifically, we propose that nonconscious goal conflicts induce a mode of processing information that increases the likelihood of approaching an issue from opposing perspectives. This hypothesis is examined by investigating the effects of nonconscious goal conflicts on confirmatory thinking, that is, a way of thinking that narrowly focuses on confirmation rather than on broader examination of information. In 5 experiments, we show that nonconscious goal conflicts significantly reduce confirmatory hypothesis testing (Experiments 1 through 3) and anchoring (Experiments 4 and 5). We further show that these effects result from a goal conflict by rejecting explanations based on priming of semantic opposites, and priming of multiple goals that do not conflict (Experiments 2 and 3), and by examining decision times as a conflict process variable (Experiment 5). Using various probes, we show that these changes in confirmatory judgments are not accompanied by changes in conflict phenomenology. Together, these results suggest that nonconscious goal conflicts attenuate the robust confirmatory thinking strategy that characterizes human thinking in numerous domains.

Advanced factory managing technology. Sentan kojo kanri gijuts

Energy Technology Data Exchange (ETDEWEB)

Matsushita, M [Daicel Chemical Industries, Ltd., Osaka (Japan)

1994-04-05

With respect to a managing technology of advanced factories in the Japanese chemical industry, this paper enumerates the following three examples to discuss the ways the future factory technologies should be: operation techniques and problems in a newest ethylene plant, operation supports and facility control in chemical factories, and CIM structuring in beer breweries. The paper describes the operation techniques in an ethylene plant that are broken down into the following: measures for safety and material diversification, environment preservation, means to minimize the required labor, adoption of multi-variables, non-interference control technology for ethylene-propylene columns, and operation techniques that have been introduced with such a new technique as an integrated instrumentation room equipped with a gas leakage detection system. Structuring of CIM in the cited beer brewery has followed the transition of IE-TQC-JIT-FMS-CIM. Although a beer brewery may give somewhat different image from an ordinary chemical plant, the beer brewing process resembles a chemical plant in that it operates reacting machines in batch multiple tanks, and uses instrumentations and controllers using sensors. The key point in the future development is an organic link between market fluctuation and production activities. 1 fig.

JINR tau-charm factory design study

International Nuclear Information System (INIS)

Perel'shtejn, E.; Aleksandrov, V.; Antropov, V.

1993-01-01

The review on tau-charm factory in JINR (Dubna) is presented. The structure scheme of tau-charm factory is described. The problems on injection complex are discussed: the composition, the working regime and parameters. The magnetic lattice of a booster is described. A versatile magnet lattice is used in tau-charm collider. It can realize both conventional flat beam scheme and monochromatization scheme. The results of chromaticity correction in high emittance lattice are presented. The list of parameters of tau-charm collider is given. The technical proposal of magnetic elements of booster and collider and their power supplies is made, as well as RF power supply in collider and vacuum system in its periodic cell. 12 refs.; 12 figs.; 3 tabs

A Confirmatory Factor Analysis of the Student Evidence-Based Practice Questionnaire (S-EBPQ) in an Australian sample.

Science.gov (United States)

Beccaria, Lisa; Beccaria, Gavin; McCosker, Catherine

2018-03-01

It is crucial that nursing students develop skills and confidence in using Evidence-Based Practice principles early in their education. This should be assessed with valid tools however, to date, few measures have been developed and applied to the student population. To examine the structural validity of the Student Evidence-Based Practice Questionnaire (S-EBPQ), with an Australian online nursing student cohort. A cross-sectional study for constructing validity. Three hundred and forty-five undergraduate nursing students from an Australian regional university were recruited across two semesters. Confirmatory Factor Analysis was used to examine the structural validity. Confirmatory Factor Analysis was applied which resulted in a good fitting model, based on a revised 20-item tool. The S-EBPQ tool remains a psychometrically robust measure of evidence-based practice use, attitudes, and knowledge and skills and can be applied in an online Australian student context. The findings of this study provided further evidence of the reliability and four factor structure of the S-EBPQ. Opportunities for further refinement of the tool may result in improvements in structural validity. Copyright © 2018 Elsevier Ltd. All rights reserved.

Constructing the Japanese version of the Maslach Burnout Inventory-Student Survey: Confirmatory factor analysis.

Science.gov (United States)

Tsubakita, Takashi; Shimazaki, Kazuyo

2016-01-01

To examine the factorial validity of the Maslach Burnout Inventory-Student Survey, using a sample of 2061 Japanese university students majoring in the medical and natural sciences (67.9% male, 31.8% female; Mage  = 19.6 years, standard deviation = 1.5). The back-translated scale used unreversed items to assess inefficacy. The inventory's descriptive properties and Cronbach's alphas were calculated using SPSS software. The present authors compared fit indices of the null, one factor, and default three factor models via confirmatory factor analysis with maximum-likelihood estimation using AMOS software, version 21.0. Intercorrelations between exhaustion, cynicism, and inefficacy were relatively higher than in prior studies. Cronbach's alphas were 0.76, 0.85, and 0.78, respectively. Although fit indices of the hypothesized three factor model did not meet the respective criteria, the model demonstrated better fit than did the null and one factor models. The present authors added four paths between error variables within items, but the modified model did not show satisfactory fit. Subsequent analysis revealed that a bi-factor model fit the data better than did the hypothesized or modified three factor models. The Japanese version of the Maslach Burnout Inventory-Student Survey needs minor changes to improve the fit of its three factor model, but the scale as a whole can be used to adequately assess overall academic burnout in Japanese university students. Although the scale was back-translated, two items measuring exhaustion whose expressions overlapped should be modified, and all items measuring inefficacy should be reversed in order to statistically clarify the factorial difference between the scale's three factors. © 2015 The Authors. Japan Journal of Nursing Science © 2015 Japan Academy of Nursing Science.

An Assessment of the Dimensionality and Factorial Structure of the Revised Paranormal Belief Scale.

Science.gov (United States)

Drinkwater, Kenneth; Denovan, Andrew; Dagnall, Neil; Parker, Andrew

2017-01-01

Since its introduction, the Revised Paranormal Belief Scale (RPBS) has developed into a principal measure of belief in the paranormal. Accordingly, the RPBS regularly appears within parapsychological research. Despite common usage, academic debates continue to focus on the factorial structure of the RPBS and its psychometric integrity. Using an aggregated heterogeneous sample ( N = 3,764), the present study tested the fit of 10 factorial models encompassing variants of the most commonly proposed solutions (seven, five, two, and one-factor) plus new bifactor alternatives. A comparison of competing models revealed a seven-factor bifactor solution possessed superior data-model fit (CFI = 0.945, TLI = 0.933, IFI = 0.945, SRMR = 0.046, RMSEA = 0.058), containing strong factor loadings for a general factor and weaker, albeit acceptable, factor loadings for seven subfactors. This indicated that belief in the paranormal, as measured by the RPBS, is best characterized as a single overarching construct, comprising several related, but conceptually independent subfactors. Furthermore, women reported significantly higher paranormal belief scores than men, and tests of invariance indicated that mean differences in gender are unlikely to reflect measurement bias. Results indicate that despite concerns about the content and psychometric integrity of the RPBS the measure functions well at both a global and seven-factor level. Indeed, the original seven-factors contaminate alternative solutions.

An Assessment of the Dimensionality and Factorial Structure of the Revised Paranormal Belief Scale

Directory of Open Access Journals (Sweden)

Kenneth Drinkwater

2017-09-01

Full Text Available Since its introduction, the Revised Paranormal Belief Scale (RPBS has developed into a principal measure of belief in the paranormal. Accordingly, the RPBS regularly appears within parapsychological research. Despite common usage, academic debates continue to focus on the factorial structure of the RPBS and its psychometric integrity. Using an aggregated heterogeneous sample (N = 3,764, the present study tested the fit of 10 factorial models encompassing variants of the most commonly proposed solutions (seven, five, two, and one-factor plus new bifactor alternatives. A comparison of competing models revealed a seven-factor bifactor solution possessed superior data-model fit (CFI = 0.945, TLI = 0.933, IFI = 0.945, SRMR = 0.046, RMSEA = 0.058, containing strong factor loadings for a general factor and weaker, albeit acceptable, factor loadings for seven subfactors. This indicated that belief in the paranormal, as measured by the RPBS, is best characterized as a single overarching construct, comprising several related, but conceptually independent subfactors. Furthermore, women reported significantly higher paranormal belief scores than men, and tests of invariance indicated that mean differences in gender are unlikely to reflect measurement bias. Results indicate that despite concerns about the content and psychometric integrity of the RPBS the measure functions well at both a global and seven-factor level. Indeed, the original seven-factors contaminate alternative solutions.

The tau-charm factory: Experimental perspectives

International Nuclear Information System (INIS)

Perl, M.L.; Schindler, R.H.

1991-09-01

This report discusses the Tau-Charm Factory Concept; D and D S Physics at the Tau-Charm Factory; τ and ν τ Physics at the Tau-Charm Factory; and Charmonium, Gluonium and Light Quark Spectroscopy at the Tau-Charm Factory

Latent structure of the Wisconsin Card Sorting Test: a confirmatory factor analytic study.

Science.gov (United States)

Greve, Kevin W; Stickle, Timothy R; Love, Jeffrey M; Bianchini, Kevin J; Stanford, Matthew S

2005-05-01

The present study represents the first large scale confirmatory factor analysis of the Wisconsin Card Sorting Test (WCST). The results generally support the three factor solutions reported in the exploratory factor analysis literature. However, only the first factor, which reflects general executive functioning, is statistically sound. The secondary factors, while likely reflecting meaningful cognitive abilities, are less stable except when all subjects complete all 128 cards. It is likely that having two discontinuation rules for the WCST has contributed to the varied factor analytic solutions reported in the literature and early discontinuation may result in some loss of useful information. Continued multivariate research will be necessary to better clarify the processes underlying WCST performance and their relationships to one another.

PENINGKATAN PENCAPAIAN KUALITAS LULUSAN D3 TEKNIK ELEKTRO DENGAN MODEL TEACHING FACTORY

Directory of Open Access Journals (Sweden)

Elsanda Merita Indrawati

2017-02-01

Full Text Available The purpose of this study, namely: (1 determine systematically theimplementation of teaching factory model of the learning process D3 electrical engineering; (2 determine the achievement quality D3 graduate in electrical engineering and Teaching Factory models. The approach used is a qualitative approach, data collection techniques through observation, interviews, documentation. Results of the assessment showed that the implementation of teaching factory model of the learning process D3 Electrical Engineering done quite well, starting from the standard of competence, media, lecturers, students, use and maintenance, production, marketing, evaluation has been structured well enough. But there are still shortcomings in the establishment of management due to the formation of management, the management structure remains unclear resulted in the implementation of the model is less than the maximum teachingfactory in the Department of Electrical Engineering D3. Implementation ofteaching factory in D3 Electrical Engineering UN PGRI Kediri has been goingpretty well, the resulting product has a quality worth selling, economical and multifunctional, the students are expected after graduation in addition to be absorbed in the industrialized world are working as interpreneur and employers on the products they produce so with the application of teaching factory, the quality D3 Electrical Engineering increasing

Can Confirmatory Biopsy be Omitted in Prostate Cancer Active Surveillance Patients with Favorable Diagnostic Features?

Science.gov (United States)

Satasivam, Prassannah; Poon, Bing Ying; Ehdaie, Behfar; Vickers, Andrew J.; Eastham, James A.

2016-01-01

Purpose We evaluated whether initial diagnostic parameters could predict the confirmatory biopsy result in patients initiating active surveillance for prostate cancer, to determine whether some men at low risk of reclassification could be spared unnecessary biopsy. Materials and Methods The cohort included 392 men with Gleason 6 prostate cancer on initial biopsy undergoing confirmatory biopsy. We used univariate and multivariable logistic regression to assess if high-grade cancer (Gleason ≥ 7) on confirmatory biopsy could be predicted from initial diagnostic parameters (prostate-specific antigen density, magnetic resonance imaging result, percent positive cores, percent cancer in positive cores, and total tumor length). Results Median age was 62 years (IQR 56–66) and 47% of patients were found to have a dominant or focal lesion on magnetic resonance imaging. Of the 392 patients, 44 (11%) were found to have high-grade cancer on confirmatory biopsy, among whom 39 had 3+4, 1 had 4+3, 3 had Gleason 8, and 1 patient had Gleason 9 disease. All predictors were significantly associated with high-grade cancer at confirmatory biopsy on univariate analysis. However, in the multivariable model only prostate-specific antigen density and total tumor length were significantly associated (AUC of 0.85). Using this model to select patients for confirmatory biopsy would generally provide a higher net benefit than performing confirmatory biopsy in all patients, across a wide range of threshold probabilities. Conclusion If externally validated, a model based on initial diagnostic criteria could be used to avoid confirmatory biopsy in many patients initiating active surveillance. PMID:26192258

Betrouwbaarheid en validiteit van de Nederlandse vertaling van de Work Design Questionnaire

NARCIS (Netherlands)

Gorgievski, Marjan J.; Peeters, Patty; Rietzschel, Eric; Bipp, Tanja

2016-01-01

This validation study among 291 Dutch employees confirms the usefulness of the Dutch translation of the Work Design Questionnaire (WDQ-NL) in the work(re)design context. According to results of confirmatory factor-analyses, the predicted factorial structure of 21 subscales and four second-order

Review of kaon factory proposals

International Nuclear Information System (INIS)

Thiessen, H.A.

1985-01-01

Nuclear physics issues and particle physics issues for a kaon factory are discussed. Kaon factory accelerator proposals are then considered. Secondary beam considerations are covered and hardware development for a kaon factory is discussed. The prospects for construction are presented. 9 refs., 12 figs., 2 tabs

Neutrino factories

International Nuclear Information System (INIS)

Dydak, F.

2002-01-01

The discovery of neutrino oscillations marks a major milestone in the history of neutrino physics, and opens a window to what lies beyond the Standard Model. Many current and forthcoming experiments will answer open questions; however, a major step forward, up to and possibly including CP violation in the neutrino mixing matrix, will be offered by the neutrino beams from a neutrino factory. The neutrino factory is a new concept for producing neutrino beams of unprecedented quality in terms of intensity, flavour composition, and precision of the beam parameters. These beams enable the exploration of otherwise inaccessible domains in neutrino oscillation physics by exploiting baselines of planetary dimensions. Suitable detectors pose formidable challenges but seem within reach with only moderate extrapolations from existing technologies. Although the main physics attraction of the neutrino factory is in the area of neutrino oscillations, an interesting spectrum of further opportunities ranging from high-precision, high-rate neutrino scattering to physics with high-intensity stopped muons comes with it

Neutrino Factory

CERN Document Server

Bogomilov, M; Tsenov, R; Dracos, M; Bonesini, M; Palladino, V; Tortora, L; Mori, Y; Planche, T; Lagrange, J  B; Kuno, Y; Benedetto, E; Efthymiopoulos, I; Garoby, R; Gilardoini, S; Martini, M; Wildner, E; Prior, G; Blondel, A; Karadzhow, Y; Ellis, M; Kyberd, P; Bayes, R; Laing, A; Soler, F  J  P; Alekou, A; Apollonio, M; Aslaninejad, M; Bontoiu, C; Jenner, L  J; Kurup, A; Long, K; Pasternak, J; Zarrebini, A; Poslimski, J; Blackmore, V; Cobb, J; Tunnell, C; Andreopoulos, C; Bennett, J  R  J; Brooks, S; Caretta, O; Davenne, T; Densham, C; Edgecock, T  R; Fitton, M; Kelliher, D; Loveridge, P; McFarland, A; Machida, S; Prior, C; Rees, G; Rogers, C; Rooney, M; Thomason, J; Wilcox, D; Booth, C; Skoro, G; Back, J  J; Harrison, P; Berg, J  S; Fernow, R; Gallardo, J  C; Gupta, R; Kirk, H; Simos, N; Stratakis, D; Souchlas, N; Witte, H; Bross, A; Geer, S; Johnstone, C; Mokhov, N; Neuffer, D; Popovic, M; Strait, J; Striganov, S; Morfín, J  G; Wands, R; Snopok, P; Bogacz, S  A; Morozov, V; Roblin, Y; Cline, D; Ding, X; Bromberg, C; Hart, T; Abrams, R  J; Ankenbrandt, C  M; Beard, K  B; Cummings, M  A  C; Flanagan, G; Johnson, R  P; Roberts, T  J; Yoshikawa, C  Y; Graves, V  B; McDonald, K  T; Coney, L; Hanson, G

2014-01-01

The properties of the neutrino provide a unique window on physics beyond that described by the standard model. The study of subleading effects in neutrino oscillations, and the race to discover CP-invariance violation in the lepton sector, has begun with the recent discovery that $\\theta_{13} > 0$. The measured value of $\\theta_{13}$ is large, emphasizing the need for a facility at which the systematic uncertainties can be reduced to the percent level. The neutrino factory, in which intense neutrino beams are produced from the decay of muons, has been shown to outperform all realistic alternatives and to be capable of making measurements of the requisite precision. Its unique discovery potential arises from the fact that only at the neutrino factory is it practical to produce high-energy electron (anti)neutrino beams of the required intensity. This paper presents the conceptual design of the neutrino factory accelerator facility developed by the European Commission Framework Programme 7 EURO$\

Assessing motivation for work environment improvements: internal consistency, reliability and factorial structure.

Science.gov (United States)

Hedlund, Ann; Ateg, Mattias; Andersson, Ing-Marie; Rosén, Gunnar

2010-04-01

Workers' motivation to actively take part in improvements to the work environment is assumed to be important for the efficiency of investments for that purpose. That gives rise to the need for a tool to measure this motivation. A questionnaire to measure motivation for improvements to the work environment has been designed. Internal consistency and test-retest reliability of the domains of the questionnaire have been measured, and the factorial structure has been explored, from the answers of 113 employees. The internal consistency is high (0.94), as well as the correlation for the total score (0.84). Three factors are identified accounting for 61.6% of the total variance. The questionnaire can be a useful tool in improving intervention methods. The expectation is that the tool can be useful, particularly with the aim of improving efficiency of companies' investments for work environment improvements. Copyright 2010 Elsevier Ltd. All rights reserved.

Factorial Validity of the Toronto Alexithymia Scale (TAS-20) in Clinical Samples: A Critical Examination of the Literature and a Psychometric Study in Anorexia Nervosa.

Science.gov (United States)

Torres, Sandra; Guerra, Marina P; Miller, Kylee; Costa, Patrício; Cruz, Inês; Vieira, Filipa M; Brandão, Isabel; Roma-Torres, António; Rocha, Magda

2018-03-30

There is extensive use of the 20-item Toronto Alexithymia Scale (TAS-20) in research and clinical practice in anorexia nervosa (AN), though it is not empirically established in this population. This study aims to examine the factorial validity of the TAS-20 in a Portuguese AN sample (N = 125), testing four different models (ranging from 1 to 4 factors) that were identified in critical examination of existing factor analytic studies. Results of confirmatory factor analysis (CFA) suggested that the three-factor solution, measuring difficulty identifying (DIF) and describing feelings (DDF), and externally oriented thinking (EOT), was the best fitting model. The quality of measurement improves if two EOT items (16 and 18) are eliminated. Internal consistency of EOT was low and decreased with age. The results provide support for the factorial validity of the TAS-20 in AN. Nevertheless, the measurement of EOT requires some caution and may be problematic in AN adolescents.

Confirmatory Factor Analysis of the Dutch Version of the Wechsler Memory Scale-Fourth Edition (WMS-IV-NL)

NARCIS (Netherlands)

Bouman, Z.; Hendriks, M.P.; Kerkmeer, M.C.; Kessels, R.P.C.; Aldenkamp, A.P.

2015-01-01

The latent factor structure of the Dutch version of the Wechsler Memory Scale-Fourth Edition (WMS-IV-NL) was examined with a series of confirmatory factor analyses. As part of the Dutch standardization, 1,188 healthy participants completed the WMS-IV-NL. Four models were tested for the Adult Battery

The structure of the Social Self-Concept (SSC Questionnaire

Directory of Open Access Journals (Sweden)

Arantza Fernández-Zabala

2016-01-01

Full Text Available This study aims to analyze the factorial structure of the newly-created Cuestionario de Autoconcepto Social - AUSO (from here on the Social Self-concept Questionnaire, or AUSO, which consists of two scales measuring social responsibility and social competence. The theoretical proposal which posits that social self-concept is the result of the combination of two basic self-perceptions: competence in social relations and response to the demands of social functioning, is based on a review of human social development theories and previous attempts to measure social self-concept. Participants were 818 students aged between 17 and 52. The results obtained though confirmatory factor analyses support the hypothesis of a structure made up of two correlated factors. In addition to providing a new measurement instrument with appropriate psychometric characteristics and valid criteria that justify its use in both applied practice and research, this study also enhances our understanding of the internal nature of the social domain of self-concept.

Design studies for the Positron Factory

International Nuclear Information System (INIS)

Okada, S.; Sunaga, H.; Kaneko, H.; Masuno, S.; Kawasuso, A.; Sakai, T.; Takizawa, H.; Yotsumoto, K.; Honda, Y.; Tagawa, S.

1996-01-01

In the design study for the Positron Factory, a feasibility of simultaneous extraction of multi-channel monoenergetic positron beams, which had been proposed at the previous conference (Linac 94), was demonstrated by an experiment using an electron linac. On the basis of the experimental result, an efficient moderator structure, which is composed of honeycomb-like assembled moderator foils and reflectors, is proposed. (author)

Ultrastructural Characterization of Zika Virus Replication Factories

Directory of Open Access Journals (Sweden)

Mirko Cortese

2017-02-01

Full Text Available Summary: A global concern has emerged with the pandemic spread of Zika virus (ZIKV infections that can cause severe neurological symptoms in adults and newborns. ZIKV is a positive-strand RNA virus replicating in virus-induced membranous replication factories (RFs. Here we used various imaging techniques to investigate the ultrastructural details of ZIKV RFs and their relationship with host cell organelles. Analyses of human hepatic cells and neural progenitor cells infected with ZIKV revealed endoplasmic reticulum (ER membrane invaginations containing pore-like openings toward the cytosol, reminiscent to RFs in Dengue virus-infected cells. Both the MR766 African strain and the H/PF/2013 Asian strain, the latter linked to neurological diseases, induce RFs of similar architecture. Importantly, ZIKV infection causes a drastic reorganization of microtubules and intermediate filaments forming cage-like structures surrounding the viral RF. Consistently, ZIKV replication is suppressed by cytoskeleton-targeting drugs. Thus, ZIKV RFs are tightly linked to rearrangements of the host cell cytoskeleton. : Cortese et al. show that ZIKV infection in both human hepatoma and neuronal progenitor cells induces drastic structural modification of the cellular architecture. Microtubules and intermediate filaments surround the viral replication factory composed of vesicles corresponding to ER membrane invagination toward the ER lumen. Importantly, alteration of microtubule flexibility impairs ZIKV replication. Keywords: Zika virus, flavivirus, human neural progenitor cells, replication factories, replication organelles, microtubules, intermediate filaments, electron microscopy, electron tomography, live-cell imaging

Superconducting cavities for beauty factories

International Nuclear Information System (INIS)

Lengeler, H.

1992-01-01

The possibilities and merits of superconducting accelerating cavities for Beauty-factories are considered. There exist already large sc systems of size and frequency comparable to the ones needed for Beauty-factories. Their status and operation experience is discussed. A comparison of normal conducting and superconducting systems is done for two typical Beauty-factory rings

Super B Factories

Indian Academy of Sciences (India)

B factory; CP violation; B meson; supersymmetry. PACS Nos 11.30.Hv; 11.30.Pb; 12.15.Hh; 12.15.Mm; 13.20.He; 13.20.Fc;. 13.35.Dx; 14.65.Fy. 1. Introduction. The two asymmetric B factories, PEP-II and KEK-B, and their companion detec- tors, BABAR and Belle, have produced a wealth of flavor physics results, subjecting.

Planned Positron Factory project

International Nuclear Information System (INIS)

Okada, Sohei

1990-01-01

The Japan Atomic Energy Research Institute, JAERI, has started, drafting a construction plan for the 'Positron Factory', in which intense energy-controllable monoenergetic positron beams are produced from pair-production reactions caused by high-energy electrons from a linac. The JAERI organized a planning committee to provide a basic picture for the Positron Factory. This article presents an overview of the interactions of positrons, intense positron sources and the research program and facilities planned for the project. The interactions of positrons and intense positron sources are discussed focusing on major characteristics of positrons in different energy ranges. The research program for the Positron Factory is then outlined, focusing on advanced positron annihilation techniques, positron spectroscopy (diffraction, scattering, channeling, microscopy), basic positron physics (exotic particle science), and positron beam technology. Discussion is also made of facilities required for the Positron Factory. (N.K.)

An assessment of factorial structure and health-related quality of life in problem drug users using the Short Form 36 Health Survey

NARCIS (Netherlands)

Buchholz, Angela; Krol, Anneke; Rist, Fred; Nieuwkerk, Pythia T.; Schippers, Gerard M.

2008-01-01

AIMS: To confirm the factorial structure of the Short Form 36 Health Survey (SF-36) in problem drug users and to compare their health-related quality of life (HRQOL) with general Dutch population norms. METHOD: Data of 394 participants from the Amsterdam Cohort Study among drug users, who had

Can Confirmatory Biopsy be Omitted in Patients with Prostate Cancer Favorable Diagnostic Features on Active Surveillance?

Science.gov (United States)

Satasivam, Prassannah; Poon, Bing Ying; Ehdaie, Behfar; Vickers, Andrew J; Eastham, James A

2016-01-01

We evaluated whether initial diagnostic parameters could predict the confirmatory biopsy result in patients initiating active surveillance for prostate cancer, to determine whether some men at low risk for disease reclassification could be spared unnecessary biopsy. The cohort included 392 men with Gleason 6 prostate cancer on initial biopsy undergoing confirmatory biopsy. We used univariate and multivariable logistic regression to assess if high grade cancer (Gleason 7 or greater) on confirmatory biopsy could be predicted from initial diagnostic parameters (prostate specific antigen density, magnetic resonance imaging result, percent positive cores, percent cancer in positive cores and total tumor length). Median patient age was 62 years (IQR 56-66) and 47% of patients had a dominant or focal lesion on magnetic resonance imaging. Of the 392 patients 44 (11%) had high grade cancer on confirmatory biopsy, of whom 39 had Gleason 3+4, 1 had 4+3, 3 had Gleason 8 and 1 had Gleason 9 disease. All predictors were significantly associated with high grade cancer at confirmatory biopsy on univariate analysis. However, in the multivariable model only prostate specific antigen density and total tumor length were significantly associated (AUC 0.85). Using this model to select patients for confirmatory biopsy would generally provide a higher net benefit than performing confirmatory biopsy in all patients, across a wide range of threshold probabilities. If externally validated, a model based on initial diagnostic criteria could be used to avoid confirmatory biopsy in many patients initiating active surveillance. Copyright © 2016 American Urological Association Education and Research, Inc. Published by Elsevier Inc. All rights reserved.

Factor Structure and Gender Stability of the Brazilian Version of the Pornography Consumption Inventory.

Science.gov (United States)

Baltieri, Danilo Antonio; de Oliveira, Vitor Henrique; de Souza Gatti, Ana Luísa; Junqueira Aguiar, Ana Saito; de Souza Aranha E Silva, Renata Almeida

2016-10-02

There are a few instruments available to measure pornograhy consumption-related constructs, and this lack of instruments can compromise the validity of research findings. The Pornography Consumption Inventory (PCI) assesses four motivations for pornography consumption, and it has been validated in hypersexual men and medical students. However, whether the psychometric properties of this instrument are comparable across genders remains unclear. Multigroup confirmatory factor analysis (MGCFA) was used to verify the invariance of the structure of the PCI across male (100) and female (105) university students. The confirmatory factor analysis (CFA) for each group showed a reasonably good fit of the data to the four-factor model. The MGCFA model included only factor loadings constrained to be equal between both genders (ΔCFI 0.05). However, the ΔCFI did not support a strong and strict factorial invariance, ΔCFI > 0.01. Although both genders seemed to agree with the conceptualization of pornography and motivations for consuming it, the PCI was not gender-invariant, as men showed a stronger degree of motivation to consume pornographic material than women did. The implications of these findings regarding the measurement of motivations for pornography use are outlined.

Psychometric properties of the Russian version of the Utrecht work engagement scale (UWES-9)

NARCIS (Netherlands)

Lovakov, Andrey V.; Agadullina, Elena R.; Schaufeli, Wilmar B.

2017-01-01

This article aims to analyze the psychometric properties of the Russian version of the Utrecht Work Engagement Scale (UWES-9) by using a sample of 1783 employees of a large Russian organization. We conducted a series of Confirmatory Factor Analysis (CFA) tests of the factorial structure and the

The Relationship of Core Self-Evaluations and Life Satisfaction in College Students with Disabilities: Evaluation of a Mediator Model

Science.gov (United States)

Smedema, Susan Miller; Chan, Fong; Yaghmaian, Rana A.; Cardoso, Elizabeth DaSilva; Muller, Veronica; Keegan, John; Dutta, Alo; Ebener, Deborah J.

2015-01-01

This study examined the factorial structure of the construct core self-evaluations (CSE) and tested a mediational model of the relationship between CSE and life satisfaction in college students with disabilities. We conducted a quantitative descriptive design using exploratory and confirmatory factor analysis and multiple regression analysis.…

Towards energy transparent factories

CERN Document Server

Posselt, Gerrit

2016-01-01

This monograph provides a methodological approach for establishing demand-oriented levels of energy transparency of factories. The author presents a systematic indication of energy drivers and cost factors, taking into account the interdependencies between facility and production domains. Particular attention is given to energy flow metering and monitoring. Readers will also be provided with an in-depth description of a planning tool which allows for systematically deriving suitable metering points in complex factory environments. The target audience primarily comprises researchers and experts in the field of factory planning, but the book may also be beneficial for graduate students.

Deciding WQO for factorial languages

KAUST Repository

Atminas, Aistis; Lozin, Vadim V.; Moshkov, Mikhail

2013-01-01

A language is factorial if it is closed under taking factors (i.e. contiguous subwords). Every factorial language can be described by an antidictionary, i.e. a minimal set of forbidden factors. We show that the problem of deciding whether a factorial language given by a finite antidictionary is well-quasi-ordered under the factor containment relation can be solved in polynomial time. © 2013 Springer-Verlag Berlin Heidelberg.

Deciding WQO for factorial languages

KAUST Repository

Atminas, Aistis

2013-04-05

A language is factorial if it is closed under taking factors (i.e. contiguous subwords). Every factorial language can be described by an antidictionary, i.e. a minimal set of forbidden factors. We show that the problem of deciding whether a factorial language given by a finite antidictionary is well-quasi-ordered under the factor containment relation can be solved in polynomial time. © 2013 Springer-Verlag Berlin Heidelberg.

Workplace Innovation: Exploratory and Confirmatory Factor Analysis for Construct Validation

Directory of Open Access Journals (Sweden)

Wipulanusat Warit

2017-06-01

Full Text Available Workplace innovation enables the development and improvement of products, processes and services leading simultaneously to improvement in organisational performance. This study has the purpose of examining the factor structure of workplace innovation. Survey data, extracted from the 2014 APS employee census, comprising 3,125 engineering professionals in the Commonwealth of Australia’s departments were analysed using exploratory factor analysis (EFA and confirmatory factor analysis (CFA. EFA returned a two-factor structure explaining 69.1% of the variance of the construct. CFA revealed that a two-factor structure was indicated as a validated model (GFI = 0.98, AGFI = 0.95, RMSEA = 0.08, RMR = 0.02, IFI = 0.98, NFI = 0.98, CFI = 0.98, and TLI = 0.96. Both factors showed good reliability of the scale (Individual creativity: α = 0.83, CR = 0.86, and AVE = 0.62; Team Innovation: α = 0.82, CR = 0.88, and AVE = 0.61. These results confirm that the two factors extracted for characterising workplace innovation included individual creativity and team innovation.

In-Factory Learning - Qualification For The Factory Of The Future

Science.gov (United States)

Quint, Fabian; Mura, Katharina; Gorecky, Dominic

2015-07-01

The Industry 4.0 vision anticipates that internet technologies will find their way into future factories replacing traditional components by dynamic and intelligent cyber-physical systems (CPS) that combine the physical objects with their digital representation. Reducing the gap between the real and digital world makes the factory environment more flexible, more adaptive, but also more complex for the human workers. Future workers require interdisciplinary competencies from engineering, information technology, and computer science in order to understand and manage the diverse interrelations between physical objects and their digital counterpart. This paper proposes a mixed-reality based learning environment, which combines physical objects and visualisation of digital content via Augmented Reality. It uses reality-based interaction in order to make the dynamic interrelations between real and digital factory visible and tangible. We argue that our learning system does not work as a stand-alone solution, but should fit into existing academic and advanced training curricula.

The Dimensions of Facebook Addiction as Measured by Facebook Addiction Italian Questionnaire and Their Relationships with Individual Differences.

Science.gov (United States)

Caci, Barbara; Cardaci, Maurizio; Scrima, Fabrizio; Tabacchi, Marco Elio

2017-04-01

The studies reported analyze the factorial structure of Facebook Addiction Italian Questionnaire (FAIQ), a variant of 20-item Young's Internet Addiction Test (IAT). In Study 1, we tested FAIQ psychometric properties using exploratory factor analysis (EFA). In Study 2, we performed a confirmatory factor analysis (CFA) to verify the FAIQ factorial structure identified through EFA. Results from CFA confirm the presence of a four-factor model accounting for 58 percent of total variance, plus a general higher order factor that best fits the data. Further relationships between FAIQ factor scores, personality, and Facebook usage have been explored.

Health Services OutPatient Experience questionnaire: factorial validity and reliability of a patient-centered outcome measure for outpatient settings in Italy

Directory of Open Access Journals (Sweden)

Coluccia A

2014-09-01

Full Text Available Anna Coluccia, Fabio Ferretti, Andrea PozzaDepartment of Medical Sciences, Surgery and Neurosciences, Santa Maria alle Scotte University Hospital, University of Siena, Siena, ItalyPurpose: The patient-centered approach to health care does not seem to be sufficiently developed in the Italian context, and is still characterized by the biomedical model. In addition, there is a lack of validated outcome measures to assess outpatient experience as an aspect common to a variety of settings. The current study aimed to evaluate the factorial validity, reliability, and invariance across sex of the Health Services OutPatient Experience (HSOPE questionnaire, a short ten-item measure of patient-centeredness for Italian adult outpatients. The rationale for unidimensionality of the measure was that it could cover global patient experience as a process common to patients with a variety of diseases and irrespective of the phase of treatment course.Patients and methods: The HSOPE was compiled by 1,532 adult outpatients (51% females, mean age 59.22 years, standard deviation 16.26 receiving care in ten facilities at the Santa Maria alle Scotte University Hospital of Siena, Italy. The sample represented all the age cohorts. Twelve percent were young adults, 57% were adults, and 32% were older adults. Exploratory and confirmatory factor analyses were conducted to evaluate factor structure. Reliability was evaluated as internal consistency using Cronbach’s α. Factor invariance was assessed through multigroup analyses.Results: Both exploratory and confirmatory analyses suggested a clearly defined unidimensional structure of the measure, with all the ten items having salient loadings on a single factor. Internal consistency was excellent (α=0.95. Indices of model fit supported a single-factor structure for both male and female outpatient groups. Young adult outpatients had significantly lower scores on perceived patient-centeredness relative to older adults. No

"Mixing" as an ethnoetiology of HIV/AIDS in Malaysia's multinational factories.

Science.gov (United States)

Root, Robin

2006-09-01

Minah Karan, the stigmatizing label appended to Malay factory women in the 1980s, signaled a dangerous female sexuality that risked spreading beyond the factory gates and infecting Malaysia's idea(l)s of its traditional kampung culture. This article narrates how Minah Karan, as the former antihero of development, was reconstituted in the 1990s, with the government's labeling of factories as "high-risk settings" for HIV/AIDS. This is an ethnoetiology based not on any evidential epidemiological data but on the racial and gendered "mixing" that transpires behind factory walls: a fear that the "mixing of the sexes" means ipso facto "sexual mixing" among the races. The article demonstrates how importation of the high-risk label articulates at the local level the new and contested linkages, economic, religious, and scientific, constitutive of globalization. The pragmatic nature and imperatives of this high-risk process are discerned in factory women's accounts of how they negotiate the interactional imperatives of factory work, because transnational structures of productivity violate the social boundaries that have long connoted political stability, moral integrity, ethnic community, and individual safety. The article concludes by questioning whether ethnoetiologies, especially when they concern sexual networks, become social etiologies, because this would locate ethnoetiologies as central to conventional public health praxis rather than as ethnographic exotica in the margins.

Confirmatory factor analysis of posttraumatic stress symptoms in sexually harassed women.

Science.gov (United States)

Palmieri, Patrick A; Fitzgerald, Louise F

2005-12-01

Posttraumatic stress disorder (PTSD) factor analytic research to date has not provided a clear consensus on the structure of posttraumatic stress symptoms. Seven hypothesized factor structures were evaluated using confirmatory factor analysis of the Posttraumatic Stress Disorder Checklist, a paper-and-pencil measure of posttraumatic stress symptom severity, in a sample of 1,218 women who experienced a broad range of workplace sexual harassment. The model specifying correlated re-experiencing, effortful avoidance, emotional numbing, and hyperarousal factors provided the best fit to the data. Virtually no support was obtained for the Diagnostic and Statistical Manual of Mental Disorders, fourth edition (DSM-IV; American Psychiatric Association, 1994) three-factor model of re-experiencing, avoidance, and hyperarousal factors. Different patterns of correlations with external variables were found for the avoidance and emotional numbing factors, providing further validation of the supported model.

Factorial Structure of a Measure of Acculturation in a Puerto Rican Population.

Science.gov (United States)

De Leon, Brunilda; Mendez, Serafin

1996-01-01

The psychometric characteristics of the Cultural Life Style Inventory were studied with a sample of 402 Puerto Rican college students. Factor analysis revealed high factorial stability for Puerto Ricans. Similarities and differences with a previously studied Mexican American population are discussed. (SLD)

Confirmatory research on the assessment of murderers.

Science.gov (United States)

Piotrowski, C

1997-12-01

Prior research, from the psychodynamically oriented literature, characterizes homicidal offenders as impulsive, vulnerable to stress, with difficulties in emotional control, particularly anger. In 1995 Coram reported Rorschach data from a sample of murderers which tentatively support earlier findings. This paper argues that confirmatory data from measures which objectively assess emotional states and behaviors could elucidate this issue.

Consistência interna e fatorial do Inventário Multifatorial de Coping para Adolescentes Reliability and confirmatory factorial analysis of the Multifactor Coping for Adolescents Inventory with Brazilian students

Directory of Open Access Journals (Sweden)

Marcos Alencar Abaide Balbinotti

2006-12-01

Full Text Available Coping é um construto multidimensional relativo às formas como as pessoas lidam com situações estressantes. Diversas pesquisas assinalam a importância dessas "respostas de enfrentamento". Este estudo visa verificar os índices de consistência interna e fatorial confirmatórios do Inventário Multifatorial de Coping para Adolescentes (IMCA-43. Assim, a coleta de dados foi realizada mediante aplicações coletivas, em sala de aula, em uma amostra de 285 estudantes do ensino fundamental e médio, de ambos os sexos e com idades variando de 13 a 18 anos. Os resultados dos índices alfa de Cronbach (0,71 a 0,89 foram satisfatórios. A adequação aos modelos tridimensional (x2/gl = 2,85; GFI = 0,757; AGFI = 0,724; RMSEA = 0,081 tetradimensional (x2/gl = 2,44; GFI = 0,724; AGFI = 0,695; RMSEA = 0,071 e pentadimensional (x2/gl = 2,32; GFI = 0,750; AGFI = 0,723; RMSEA = 0,068 é pouco recomendada. Os resultados indicam serem necessárias pesquisas continuadas a fim de melhorar certas qualidades métricas deste instrumento.Coping is a multidimensional concept concerning how people face and deal with stressful situations. Researches have been showing the importance of these forms of behavior responses. This study aimed to measure the internal consistency of the Multifactorial Inventory of Coping for Adolescents (IMCA-43 and evaluate the fit of the model through confirmatory factorial analysis. A sample of 285 students of Intermediate and High School, of both sexes, with ages ranging from 13 to 18 years old was used. The data was colected colectivelly in their classrooms. The results of the Cronbach alfa (0,71 to 0,89 were satisfactory. The index of adequacy for the tri-dimensional model (x2/gl = 2,85; GFI = 0,757; AGFI = 0,724; RMSEA = 0,081, tetra-dimensional (x2/gl = 2,44; GFI = 0,724; AGFI = 0,695; RMSEA = 0,071 and penta-dimensional (x2/gl = 2,32; GFI = 0,750; AGFI = 0,723; RMSEA = 0,068 are non-recommended for the fit of the model. The results

Assessing Self-Regulated Strategies for School Writing: Cross-Cultural Validation of a Triadic Measure

Science.gov (United States)

Malpique, Anabela Abreu; Veiga Simão, Ana Margarida

2015-01-01

This study reports on the construction of a questionnaire to assess ninth-grade students' use of self-regulated strategies for school writing tasks. Exploratory and confirmatory factorial analyses were conducted to validate the factor structure of the instrument. The initial factor analytic stage (n = 296) revealed a 13-factor scale, accounting…

Understanding Student Teachers' Behavioural Intention to Use Technology: Technology Acceptance Model (TAM) Validation and Testing

Science.gov (United States)

Wong, Kung-Teck; Osman, Rosma bt; Goh, Pauline Swee Choo; Rahmat, Mohd Khairezan

2013-01-01

This study sets out to validate and test the Technology Acceptance Model (TAM) in the context of Malaysian student teachers' integration of their technology in teaching and learning. To establish factorial validity, data collected from 302 respondents were tested against the TAM using confirmatory factor analysis (CFA), and structural equation…

The Smart Factory

DEFF Research Database (Denmark)

Radziwon, Agnieszka; Bilberg, Arne; Bogers, Marcel

2014-01-01

Nowadays we live in a world, which a decade ago would only be described in the science fiction literature. More and more things become smart and both scientists and engineers strive for developing not only new and innovative devices, but also homes, factories, or even cities. Despite of continuous...... development, many of those concepts are still being just a vision of the future, which still needs a lot of effort to become true. This paper reviews the usage of adjective smart in respect to technology and with a special emphasis on the smart factory concept placement among contemporary studies. Due...... to a lack of a consensus of common understanding of this term, a unified definition is proposed. The conceptualization will not only refer to various smart factory visions reported in the literature, but also link the crucial characteristics of this emerging manufacturing concept to usual manufacturing...

Factor structure and psychometric properties of english and spanish versions of the edinburgh postnatal depression scale among Hispanic women in a primary care setting.

Science.gov (United States)

Hartley, Chelsey M; Barroso, Nicole; Rey, Yasmin; Pettit, Jeremy W; Bagner, Daniel M

2014-12-01

Although a number of studies have examined the factor structure of the Edinburgh Postnatal Depression Scale (EPDS) in predominately White or African American samples, no published research has reported on the factor structure among Hispanic women who reside in the United States. The current study examined the factor structure of the EPDS among Hispanic mothers in the United States. Among 220 Hispanic women, drawn from a pediatric primary care setting, with an infant aged 0 to 10 months, 6 structural models guided by the empirical literature were evaluated using confirmatory factor analysis. Results supported a 2-factor model of depression and anxiety as the best fitting model. Multigroup models supported the factorial invariance across women who completed the EDPS in English and Spanish. These findings provide initial support for the 2-factor structure of the EPDS among Hispanic women in the United States. © 2014 Wiley Periodicals, Inc.

PCs in the factory

CERN Document Server

2013-01-01

Please note this is a short discount publication.PCs have become as essential to the factory environment as they are to the office environment. This in-depth report examines how specially adapted PCs and peripherals are being established in Factory Process Control and Reporting. The report covers: * Hardware and Software* Typical Applications* Implementation Issues* Case Studies and Real Applications

Designing fractional factorial split-plot experiments using integer programming

DEFF Research Database (Denmark)

Capehart, Shay R.; Keha, Ahmet; Kulahci, Murat

2011-01-01

factorial (FF) design, with the restricted randomisation structure to account for the whole plots and subplots. We discuss the formulation of FFSP designs using integer programming (IP) to achieve various design criteria. We specifically look at the maximum number of clear two-factor interactions...

Factorial Validity and Invariance Assessment of a Short Version of the Recalled Childhood Gender Identity/Role Questionnaire.

Science.gov (United States)

Veale, Jaimie F

2016-04-01

Recalled childhood gender role/identity is a construct that is related to sexual orientation, abuse, and psychological health. The purpose of this study was to assess the factorial validity of a short version of Zucker et al.'s (2006) "Recalled Childhood Gender Identity/Gender Role Questionnaire" using confirmatory factor analysis and to test the stability of the factor structure across groups (measurement invariance). Six items of the questionnaire were completed online by 1929 participants from a variety of gender identity and sexual orientation groups. Models of the six items loading onto one factor had poor fit for the data. Items were removed for having a large proportion of error variance. Among birth-assigned females, a five-item model had good fit for the data, but there was evidence for differences in scale's factor structure across gender identity, age, level of education, and country groups. Among birth-assigned males, the resulting four-item model did not account for all of the relationship between variables, and modeling for this resulted in a model that was almost saturated. This model also had evidence of measurement variance across gender identity and sexual orientation groups. The models had good reliability and factor score determinacy. These findings suggest that results of previous studies that have assessed recalled childhood gender role/identity may have been susceptible to construct bias due to measurement variance across these groups. Future studies should assess measurement invariance between groups they are comparing, and if it is not found the issue can be addressed by removing variant indicators and/or applying a partial invariance model.

Preserving the Modernist Vertical Urban Factory

Directory of Open Access Journals (Sweden)

Nina Rappaport

2016-07-01

Full Text Available This essay is adapted in part, from the section, “Modern Factory Architecture” case studies from Nina Rappaport’s book Vertical Urban Factory, published by Actar this spring. Vertical Urban Factory began as an architecture studio, and then an exhibition, which opened in New York in 2011 and traveled to Detroit and Toronto in 2012. Last year the show was displayed at Archizoom at EPFL in Lausanne; Industry City, Brooklyn; and the Charles Moore School of Architecture at Kean University, in New Jersey. The project continues as a think tank evaluating factory futures and urban industrial potential.

Confirmatory factor analysis of the neck disability index in a whiplash population indicates a one-factor model is viable

OpenAIRE

Gabel, Charles P.; Cuesta-Vargas, Antonio I.; Barr, Sebastian; Winkeljohn Black, Stephanie; Osborne, Jason W.; Melloh, Markus

2016-01-01

Purpose The neck disability index (NDI) as a 10-item patient reported outcome (PRO) measure is the most commonly used whiplash associated disorders (WAD) assessment tool. However, statistical rigor and factor structure are not definitive. To date, confirmatory factor analysis (CFA) has not examined whether the factor structure generalizes across different groups (e.g., WAD versus non-WAD). This study aimed to determine the psychometric properties of the NDI in these population groups.

Healthcare professionals' and parents' experiences of the confirmatory testing period: a qualitative study of the UK expanded newborn screening pilot.

Science.gov (United States)

Moody, Louise; Atkinson, Lou; Kehal, Isher; Bonham, James R

2017-05-08

With further expansion of the number of conditions for which newborn screening can be undertaken, it is timely to consider the impact of positive screening results and the confirmatory testing period on the families involved. This study was undertaken as part of a larger programme of work to evaluate the Expanded Newborn Screening (ENBS) programme in the United Kingdom (UK). It was aimed to determine the views and experiences of healthcare professionals (HCPs) and parents on communication and interaction during the period of confirmatory testing following a positive screening result. Semi-structured interviews were undertaken with parents of children who had received a positive ENBS result and HCPs who had been involved with the diagnosis and support of parents. Ten parents and 11 healthcare professionals took part in the in-depth interviews. Questions considered the journey from the positive screening result through confirmatory testing to a confirmed diagnosis and the communication and interaction between the parents and HCPs that they had been experienced. Key themes were identified through thematic analysis. The results point to a number of elements within the path through confirmatory testing that are difficult for parents and could be further developed to improve the experience. These include the way in which the results are communicated to parents, rapid turnaround of results, offering a consistent approach, exploring interventions to support family relationships and reviewing the workload and scheduling implications for healthcare professionals. As technology enables newborn screening of a larger number of conditions, there is an increasing need to consider and mediate the potentially negative effects on families. The findings from this study point to a number of elements within the path through confirmatory testing that are difficult for parents and could be further developed to benefit the family experience.

Psychometric Properties and Factorial Structure of the Chinese Version of the Gratitude Resentment and Appreciation Test

Science.gov (United States)

Lin, Shu-Hui; Huang, Yun-Chen

2016-01-01

The purpose of this study was to validate a Chinese version of the Gratitude Resentment and Appreciation Test (GRAT) with Taiwanese students. In Study 1, a total of 2511 Taiwanese students participated and completed the translated GRAT. Exploratory factor analysis, confirmatory factor analysis and reliability analysis were undertaken to assess the…

Implementation of IEC Generic Model of Type 1 Wind Turbine Generator in DIgSILENT PowerFactory

DEFF Research Database (Denmark)

Zhao, Haoran; Wu, Qiuwei; Margaris, Ioannis

2013-01-01

The implementation method for the International Electrotechnical Commission (IEC) generic models of Type 1 wind turbine generator (WTG) in DIgSILENT PowerFactory is presented. The following items are described, i.e. model structure, model blocks and how to implement these blocks in the PowerFactory...

A Rasch and confirmatory factor analysis of the General Health Questionnaire (GHQ - 12

Directory of Open Access Journals (Sweden)

Velikova Galina

2010-04-01

Full Text Available Abstract Background The General Health Questionnaire (GHQ - 12 was designed as a short questionnaire to assess psychiatric morbidity. Despite the fact that studies have suggested a number of competing multidimensional factor structures, it continues to be largely used as a unidimensional instrument. This may have an impact on the identification of psychiatric morbidity in target populations. The aim of this study was to explore the dimensionality of the GHQ-12 and to evaluate a number of alternative models for the instrument. Methods The data were drawn from a large heterogeneous sample of cancer patients. The Partial Credit Model (Rasch was applied to the 12-item GHQ. Item misfit (infit mean square ≥ 1.3 was identified, misfitting items removed and unidimensionality and differential item functioning (age, gender, and treatment aims were assessed. The factor structures of the various alternative models proposed in the literature were explored and optimum model fit evaluated using Confirmatory Factor Analysis. Results The Rasch analysis of the 12-item GHQ identified six misfitting items. Removal of these items produced a six-item instrument which was not unidimensional. The Rasch analysis of an 8-item GHQ demonstrated two unidimensional structures corresponding to Anxiety/Depression and Social Dysfunction. No significant differential item functioning was observed by age, gender and treatment aims for the six- and eight-item GHQ. Two models competed for best fit from the confirmatory factor analysis, namely the GHQ-8 and Hankin's (2008 unidimensional model, however, the GHQ-8 produced the best overall fit statistics. Conclusions The results are consistent with the evidence that the GHQ-12 is a multi-dimensional instrument. Use of the summated scores for the GHQ-12 could potentially lead to an incorrect assessment of patients' psychiatric morbidity. Further evaluation of the GHQ-12 with different target populations is warranted.

Dimensional structure of the oral health-related quality of life in healthy Spanish workers

Directory of Open Access Journals (Sweden)

López Joaquín F

2010-02-01

Full Text Available Abstract Background Oral health-related quality of life (OHQoL is conceived as a multidimensional construct. Here our aim was to investigate the dimensional structure of OHQoL as measured by the Spanish versions of the Oral Impacts on Daily Performance (OIDP and the Oral Health Impact Profile (OHIP-14 questionnaires applied simultaneously. Methods We recruited a consecutive sample of 270 healthy Spanish workers visiting the Employment Risk Prevention Centre for a routine medical check-up. OHIP-14 was self-completed by participants but the OIDP was completed in face-to-face interviews. An Exploratory Factor Analysis (EFA was performed to identify the underlying dimensions of the OHQoL construct assessed by both instruments. This factorial structure was later confirmed by Confirmatory Factor Analysis (CFA using several estimators of goodness of fit indices. Results EFA and the CFA identified and respectively confirmed a set of 3 underlying factors in both questionnaires that could be interpreted as functional limitation, pain-discomfort, and psychosocial impacts. The model achieved was seen to fit properly for both instruments, but the factorial structure was clearer for the OIDP. Conclusions The results provide evidence for construct equivalence in the latent factors assessed by both OIDP and OHIP-14, suggesting that OHQoL is a three-dimensional construct. The prevalence of impact on these three factors was coherent between both indicators, pain-discomfort having the highest prevalence, followed by psycho-social impact, and functional limitation.

Exploring flavor structure of supersymmetry breaking at B factories

International Nuclear Information System (INIS)

Goto, Toru; Shindou, Tetsuo; Tanaka, Minoru; Okada, Yasuhiro; Shimizu, Yasuhiro

2003-01-01

We investigate flavor physics at present and future B factories in order to distinguish supersymmetric models. We evaluate CP asymmetries in various B decay modes, Δm Bd , Δm Bs , and ε K in three supersymmetric models, i.e. the minimal supergravity, the SU(5) SUSY GUT with right handed neutrinos, and a supersymmetric model with U(2) flavor symmetry. The allowed regions of Δm Bs /Δm Bd and CP asymmetries in B → J/ψK S and b → sγ are different for the three models so that it is possible to distinguish the three models by precise determinations of these observables in near future experiments. (author)

A CONFIRMATORY STUDY OF SUPPLY CHAIN PERFORMANCE AND COMPETITIVENESS OF INDIAN MANUFACTURING ORGANIZATIONS

Directory of Open Access Journals (Sweden)

Amit Kumar Marwah

2014-03-01

Full Text Available This paper presents finding of a study on Indian manufacturing organizations. A conceptual model is proposed based on a rigorous literature review. The model so developed undergoes through a confirmatory factor analysis (CFA using Structural Equation Modeling (SEM approach. The paper highlights various factors responsible for supply chain performance (SCP, subsequently leading to competitiveness. The survey involves 361 manufacturing organizations across India and the data is gathered using 5-point Likert scale. The study a ttempts to integrate various factors contributing to SCP in a single study. It is proposed to further test the model using exploratory factor analysis (EFA.

Sixteen-item Anxiety Sensitivity Index: Confirmatory factor analytic evidence, internal consistency, and construct validity in a young adult sample from the Netherlands

NARCIS (Netherlands)

Vujanovic, Anka A.; Arrindell, Willem A.; Bernstein, Amit; Norton, Peter J.; Zvolensky, Michael J.

The present investigation examined the factor structure, internal consistency, and construct validity of the 16-item Anxiety Sensitivity Index (ASI; Reiss Peterson, Gursky, & McNally 1986) in a young adult sample (n = 420)from the Netherlands. Confirmatory factor analysis was used to comparatively

Measurement invariance of Rosenberg Self-Esteem Scale between British and Chinese college students

OpenAIRE

Luo, Chengwen

2010-01-01

The present study examined the factor structure and measurement invariance of the Rosenberg Self-Esteem Scale in college students from Britain (N=150) and China (N=205). Confirmatory factor analyses suggested that the two-factor model, which consisted of a positive self-image factor and a negative self-image factor, could fit the data better than single factor structure especially after deleting the eighth item. Furthermore, factorial structure was invariant across groups in configural level ...

Self-regulation and selective exposure: the impact of depleted self-regulation resources on confirmatory information processing.

Science.gov (United States)

Fischer, Peter; Greitemeyer, Tobias; Frey, Dieter

2008-03-01

In the present research, the authors investigated the impact of self-regulation resources on confirmatory information processing, that is, the tendency of individuals to systematically prefer standpoint-consistent information to standpoint-inconsistent information in information evaluation and search. In 4 studies with political and economic decision-making scenarios, it was consistently found that individuals with depleted self-regulation resources exhibited a stronger tendency for confirmatory information processing than did individuals with nondepleted self-regulation resources. Alternative explanations based on processes of ego threat, cognitive load, and mood were ruled out. Mediational analyses suggested that individuals with depleted self-regulation resources experienced increased levels of commitment to their own standpoint, which resulted in increased confirmatory information processing. In sum, the impact of ego depletion on confirmatory information search seems to be more motivational than cognitive in nature.

Factor structure of the pictorial scale of perceived competence and social acceptance with two pre-elementary samples.

Science.gov (United States)

Mantzicopoulos, Panayota; French, Brian F; Maller, Susan J

2004-01-01

Competing models of the factorial structure of the Pictorial Scale of Perceived Competence and Social Acceptance (PSPCSA) were tested for fit using multisample confirmatory factor analysis. The best fitting model was tested for invariance (a) across samples of middle-class (n = 251) and economically disadvantaged (Head Start, n = 117) kindergarten children (whose ages ranged from 67 to 86 months), and (b) over time (at the end of preschool and kindergarten) for the Head Start sample. For kindergarten children, regardless of socioeconomic status, the factor structure of the PSPCSA was consistent with the 2-factor model of Competence and Acceptance. This model also fit reasonably well for Head Start children at the end of their preschool year. However, in addition to providing broad support for the dimensionality of the measure, our findings highlight important concerns about the PSPCSA. Copyright 2004 Society for Research in Child Development, Inc.

The value of confirmatory testing in early infant HIV diagnosis programmes in South Africa: A cost-effectiveness analysis.

Science.gov (United States)

Dunning, Lorna; Francke, Jordan A; Mallampati, Divya; MacLean, Rachel L; Penazzato, Martina; Hou, Taige; Myer, Landon; Abrams, Elaine J; Walensky, Rochelle P; Leroy, Valériane; Freedberg, Kenneth A; Ciaranello, Andrea

2017-11-01

The specificity of nucleic acid amplification tests (NAATs) used for early infant diagnosis (EID) of HIV infection is model, we simulated EID testing at age 6 weeks for HIV-exposed infants without and with confirmatory testing. We assumed a NAAT cost of US$25, NAAT specificity of 99.6%, NAAT sensitivity of 100% for infants infected in pregnancy or at least 4 weeks prior to testing, and a mother-to-child transmission (MTCT) rate at 12 months of 4.9%; we simulated guideline-concordant rates of testing uptake, result return, and antiretroviral therapy (ART) initiation (100%). After diagnosis, infants were linked to and retained in care for 10 years (false-positive) or lifelong (true-positive). All parameters were varied widely in sensitivity analyses. Outcomes included number of infants with false-positive diagnoses linked to ART per 1,000 ART initiations, life expectancy (LE, in years) and per-person lifetime HIV-related healthcare costs. Both without and with confirmatory testing, LE was 26.2 years for HIV-infected infants and 61.4 years for all HIV-exposed infants; clinical outcomes for truly infected infants did not differ by strategy. Without confirmatory testing, 128/1,000 ART initiations were false-positive diagnoses; with confirmatory testing, 1/1,000 ART initiations were false-positive diagnoses. Because confirmatory testing averted costly HIV care and ART in truly HIV-uninfected infants, it was cost-saving: total cost US$1,790/infant tested, compared to US$1,830/infant tested without confirmatory testing. Confirmatory testing remained cost-saving unless NAAT cost exceeded US$400 or the HIV-uninfected status of infants incorrectly identified as infected was ascertained and ART stopped within 3 months of starting. Limitations include uncertainty in the data used in the model, which we examined with sensitivity and uncertainty analyses. We also excluded clinical harms to HIV-uninfected infants incorrectly treated with ART after false-positive diagnosis (e

Confirmatory factor analysis of the Competitive State Anxiety Inventory-2.

Science.gov (United States)

Lane, A M; Sewell, D F; Terry, P C; Bartram, D; Nesti, M S

1999-06-01

The aim of this study was to evaluate the factor structure of the Competitive State Anxiety Inventory-2 (CSAI-2) using confirmatory factor analysis. Volunteer participants (n = 1213) completed the CSAI-2 approximately 1 h before competition and the data were analysed in two samples. The hypothesized model showed poor fit indices in both samples independently (Robust Comparative Fit Index: sample A = 0.82, sample B = 0.84) and simultaneously (Comparative Fit Index = 0.83), suggesting that the factor structure proposed by Martens et al. is flawed. Our findings suggest that a limitation of the Cognitive Anxiety scale derives from phrasing items around the word 'concerned' rather than 'worried'. We suggest that being concerned about an impending performance does not necessarily mean that an athlete is experiencing negative thoughts, but that the athlete is acknowledging the importance and difficulty of the challenge and is attempting to mobilize resources to cope. The present results question the use of the CSAI-2 as a valid measure of competitive state anxiety.

An examination of the factor structure and sex invariance of a French translation of the Body Appreciation Scale-2 in university students.

Science.gov (United States)

Kertechian, Sevag; Swami, Viren

2017-06-01

The Body Appreciation Scale-2 (BAS-2) is a measure of positive body image that has been found that have a one-dimensional factor structure in a number of different cultural groups. Here, we examined the factor structure and sex-based measurement invariance of a French translation of the BAS-2. A total of 652 university students (age M=21.33, SD=3.18) completed a newly-translated French version of the BAS-2. Exploratory factor analyses with a randomly selected split-half subsample revealed that the BAS-2 had a one-dimensional factor structure in both sexes. Confirmatory factor analyses with a second split-half subsample indicated that the one-dimensional factor structure had adequate fit following modifications and was invariant across sex. French BAS-2 scores had adequate internal consistency and men had significantly higher body appreciation than women (ds=.16-.23). These results provide preliminary support for the factorial validity of the French BAS-2. Copyright © 2017 Elsevier Ltd. All rights reserved.

RIKEN radioactive isotope beam factory project – Present status and ...

Indian Academy of Sciences (India)

Programs for studying nuclear reactions and structure of exotic nuclei available at the RIKEN radioactive isotope beam factory project are introduced and discussed by demonstrating recent highlights. Special emphasis ... RIKEN Nishina Center for Accelerator-Based Science, 2-1 Hirosawa, Wako, Saitama 351-0198, Japan ...

SatisFactory Final System Evaluation Report

OpenAIRE

Sunlight SA

2018-01-01

The present document is a deliverable of the SatisFactory project, funded by the European Commission’s Directorate-General for Research and Innovation (DG RTD), under its Horizon 2020 Research and innovation programme (H2020). The main objective of this deliverable is to report on the SatisFactory Final System Evaluation, with regards to the industrial pilots at COMAU and SUNLIGHT. The evaluation of SatisFactory platform is based on the implementation of the business scenarios where each tool...

WQO is Decidable for Factorial Languages

KAUST Repository

Atminas, Aistis

2017-08-08

A language is factorial if it is closed under taking factors, i.e. contiguous subwords. Every factorial language can be described by an antidictionary, i.e. a minimal set of forbidden factors. We show that the problem of deciding whether a factorial language given by a finite antidictionary is well-quasi-ordered under the factor containment relation can be solved in polynomial time. We also discuss possible ways to extend our solution to permutations and graphs.

Baby factories taint surrogacy in Nigeria.

Science.gov (United States)

Makinde, Olusesan Ayodeji; Makinde, Olufunmbi Olukemi; Olaleye, Olalekan; Brown, Brandon; Odimegwu, Clifford O

2016-01-01

The practice of reproductive medicine in Nigeria is facing new challenges with the proliferation of 'baby factories'. Baby factories are buildings, hospitals or orphanages that have been converted into places for young girls and women to give birth to children for sale on the black market, often to infertile couples, or into trafficking rings. This practice illegally provides outcomes (children) similar to surrogacy. While surrogacy has not been well accepted in this environment, the proliferation of baby factories further threatens its acceptance. The involvement of medical and allied health workers in the operation of baby factories raises ethical concerns. The lack of a properly defined legal framework and code of practice for surrogacy makes it difficult to prosecute baby factory owners, especially when they are health workers claiming to be providing services to clients. In this environment, surrogacy and other assisted reproductive techniques urgently require regulation in order to define when ethico-legal lines have been crossed in providing surrogacy or surrogacy-like services. Copyright © 2015 Reproductive Healthcare Ltd. Published by Elsevier Ltd. All rights reserved.

Haiti. Educating factory workers.

Science.gov (United States)

Hughes, H

1990-04-01

There are approximately 50,000 workers employed in the light assembly industry in Haiti. About 70% are women, the majority of whom are aged between 25 and 34 years, and are either single or in a nonpermanent relationship with the father of their children. Many live and work in appalling conditions, surviving on very low wages to support several children and an extended family. The acquired immunodeficiency syndrome (AIDS) is now a visible problem in many factories. In October 1988, the Center for the Promotion of Women Workers (Centre de Promotion des Femmes Ouvriers/CPFO) launched a pilot AIDS education program for factory women. The Center, based in a large industrial zone near the airport, runs a health clinic and courses in literacy, communications skills, health promotion and family planning. The new AIDS program allowed CPFO staff to gain entry into factories for the 1st time. Other courses were held outside working hours and outside factory premises. Staff contacted manages by telephone to arrange a meeting to discuss AIDS and to ask permission to hold educational "round tables" with workers. Of 18 managers in the factories approached over a 12-month period, only 2 refused entry to CPFO staff. Almost all managers reported they had registered between 2 and 5 deaths from AIDS among their employees over the past couple of years. A total of 85 educational sessions, each lasting about 2 hours, were held within 28 different factories, community or labor organizations reaching 3063 workers (male and female). In each session, the presentation was carried out by 2 CPFO trained monitors and included a slide show, flip charts, and the video "Met ko," originally produced for Haitian immigrants in New York. The most important aspect of the program was the training of 38 volunteer factory-based health promoters. These promoters attended the round table sessions, where they facilitated discussion and distributed condoms and were subsequently available for counseling co

Eating disorder examination: Factor structure and norms in a clinical female pediatric eating disorder sample.

Science.gov (United States)

O'Brien, Amy; Watson, Hunna J; Hoiles, Kimberley J; Egan, Sarah J; Anderson, Rebecca A; Hamilton, Matthew J; Shu, Chloe; McCormack, Julie

2016-01-01

The factor structure of the eating disorder examination (EDE) has never been tested in a clinical pediatric sample, and no normative data exist. The factor structure of an adapted EDE was examined in a clinical sample of 665 females aged 9-17 years with anorexia nervosa spectrum (70%), bulimia nervosa spectrum (12%), purging disorder (3%), and unspecified feeding and eating disorders (15%). The original four-factor model was a good fit in a confirmatory factor analysis as well a higher order model with three dimensions of restraint, eating concern, and combined weight concern/shape concern. Normative data are reported for clinicians to identify the percentiles in which their patients' score. The findings support dimensions of restraint, eating concern, weight concern, and shape concern in a clinical pediatric sample. This supports the factorial validity of the EDE, and the norms may assist clinicians to evaluate symptoms in females under 18 years. © 2015 Wiley Periodicals, Inc.

Dyadic confirmatory factor analysis of the inflammatory bowel disease family responsibility questionnaire.

Science.gov (United States)

Greenley, Rachel Neff; Reed-Knight, Bonney; Blount, Ronald L; Wilson, Helen W

2013-09-01

Evaluate the factor structure of youth and maternal involvement ratings on the Inflammatory Bowel Disease Family Responsibility Questionnaire, a measure of family allocation of condition management responsibilities in pediatric inflammatory bowel disease. Participants included 251 youth aged 11-18 years with inflammatory bowel disease and their mothers. Item-level descriptive analyses, subscale internal consistency estimates, and confirmatory factor analyses of youth and maternal involvement were conducted using a dyadic data-analytic approach. Results supported the validity of 4 conceptually derived subscales including general health maintenance, social aspects, condition management tasks, and nutrition domains. Additionally, results indicated adequate support for the factor structure of a 21-item youth involvement measure and strong support for a 16-item maternal involvement measure. Additional empirical support for the validity of the Inflammatory Bowel Disease Family Responsibility Questionnaire was provided. Future research to replicate current findings and to examine the measure's clinical utility is warranted.

Internet Factories

NARCIS (Netherlands)

Strijkers, R.J.

2014-01-01

This thesis contributes a novel concept for introducing new network technologies in network infrastructures. The concept, called Internet factories, describes the methodical process to create and manage application-specific networks from application programs, referred to as Netapps. An Internet

Internet factories

NARCIS (Netherlands)

Strijkers, R.J.

2014-01-01

This thesis contributes a novel concept for introducing new network technologies in network infrastructures. The concept, called Internet factories, describes the methodical process to create and manage application-specific networks from application programs, referred to as Netapps. An Internet

Baby Factory

African Journals Online (AJOL)

Prof

2018-01-24

Jan 24, 2018 ... mass media have the power to easily propagate ideas on social change ... issue of 'baby factory' is becoming everyday news affecting the right of ... according to recent mass media reports, teenage girls and young women are.

Group sequential and confirmatory adaptive designs in clinical trials

CERN Document Server

Wassmer, Gernot

2016-01-01

This book provides an up-to-date review of the general principles of and techniques for confirmatory adaptive designs. Confirmatory adaptive designs are a generalization of group sequential designs. With these designs, interim analyses are performed in order to stop the trial prematurely under control of the Type I error rate. In adaptive designs, it is also permissible to perform a data-driven change of relevant aspects of the study design at interim stages. This includes, for example, a sample-size reassessment, a treatment-arm selection or a selection of a pre-specified sub-population. Essentially, this adaptive methodology was introduced in the 1990s. Since then, it has become popular and the object of intense discussion and still represents a rapidly growing field of statistical research. This book describes adaptive design methodology at an elementary level, while also considering designing and planning issues as well as methods for analyzing an adaptively planned trial. This includes estimation methods...

Análise da consistência interna e fatorial confirmatório do IMPRAFE-126 com praticantes de atividades físicas gaúchos Reliability and confirmatory factorial analysis of the IMPRAFE-126 with gauchos' practitioners of physical activities

Directory of Open Access Journals (Sweden)

Marcos Alencar Abaide Balbinotti

2008-06-01

Full Text Available Neste estudo, a motivação é entendida à luz da teoria da Autodeterminação. O objetivo deste estudo é verificar os índices de consistência interna e fatorial confirmatório do IMPRAFE-126. Utilizou-se uma amostra de 1.377 sujeitos, gaúchos, de ambos os sexos e com idades variando de 13 a 83 anos. Os resultados dos índices alfa de Cronbach (superiores a 0,89 foram satisfatórios. A adequação do modelo em seis dimensões foi testada e a validade confirmatória foi assumida para a amostra geral (x2/gl=2,520; GFI=0,859; AGFI=0,854; RMSEA=0,065 e para os sexos masculino (x2/gl=3,905; GFI=0,885; AGFI=0,881; RMSEA=0,066 e feminino (x2/gl=4,337; GFI=0,840; AGFI=0,831; RMSEA=0,068. Esses resultados indicam que o IMPRAFE-126 é um instrumento promissor e que pode ser oportunamente utilizado por psicólogos do esporte ou educadores físicos, aqueles particularmente interessados em avaliar os níveis de motivação de atletas ou praticantes de atividade física e esporte em geral. Entretanto, outros estudos de validade, fidedignidade e de normas devem ser conduzidos a fim de poder-se publicá-los em um futuro próximo.In this study, motivation is understood in the context of Self-determination theory. This study aims to verify the index of reliability and confirmatory factorial validity of the IMPRAFE-126. A sample of 1.377 gauchos' practitioners of physical activities, both sexes with ages between 13 and 83 years old, was used. The results of Cronbach's alpha index (.89 to .94 had been satisfactory. The adequacy to the six-dimension model was tested and the construct confirmatory validity for the general sample was assumed (x2/gl=2,520; GFI=0,859; AGFI=0,854; RMSEA=0,065, as so as for both sexes (masculine: x2/gl=3,905; GFI=0,885; AGFI=0,881; RMSEA=0,066; feminine: x2/gl=4,337; GFI=0,840; AGFI=0,831; RMSEA=0,068. These results indicate the IMPRAFE-126 is a promising tool that can be used by sports psychologists or personal trainers particularly

The Consequences of Perfectionism Scale: Factorial structure and relationships with perfectionism, performance perfectionism, affect, and depressive symptoms

OpenAIRE

Stoeber, Joachim; Hoyle, Alison J.; Last, Freyja

2013-01-01

This study investigated the Consequences of Perfectionism Scale (COPS) and its relationships with perfectionism, performance perfectionism, affect, and depressive symptoms in 202 university students using confirmatory factor analysis, correlations, and regression analyses. Results suggest that the COPS is a reliable and valid measure of positive and negative consequences of perfectionism.

Development and validity of a scale to measure workplace culture of health.

Science.gov (United States)

Kwon, Youngbum; Marzec, Mary L; Edington, Dee W

2015-05-01

To describe the development of and test the validity and reliability of the Workplace Culture of Health (COH) scale. Exploratory factor analysis and confirmatory factor analysis were performed on data from a health care organization (N = 627). To verify the factor structure, confirmatory factor analysis was performed on a second data set from a medical equipment manufacturer (N = 226). The COH scale included a structure of five orthogonal factors: senior leadership and polices, programs and rewards, quality assurance, supervisor support, and coworker support. With regard to construct validity (convergent and discriminant) and reliability, two different US companies showed the same factorial structure, satisfactory fit statistics, and suitable internal and external consistency. The COH scale represents a reliable and valid scale to assess the workplace environment and culture for supporting health.

Phi factories

International Nuclear Information System (INIS)

Anon.

1990-01-01

Plans for 'phi factories' gathered momentum with a recent workshop at UCLA. These machines, high luminosity electron-positron colliders working near the phi resonance at 1020 MeV, have been proposed at Laboratories in Europe, the US, Japan and the USSR

Automation in structural biology beamlines of the Photon Factory

International Nuclear Information System (INIS)

Igarashi, Noriyuki; Hiraki, Masahiko; Matsugaki, Naohiro; Yamada, Yusuke; Wakatsuki, Soichi

2007-01-01

The Photon Factory currently operates four synchrotron beamlines for protein crystallography and two more beamlines are scheduled to be constructed in the next years. Over the last years these beamlines have been upgraded and equipped with a fully automated beamline control system based on a robotic sample changer. The current system allows for remote operation, controlled from the user's area, of sample mounting, centering and data collection of pre-frozen crystals mounted in Hampton-type cryo-loops on goniometer head. New intuitive graphical user interfaces have been developed so as to control the complete beamline operation. Furthermore, algorithms for automatic sample centering based on pattern matching and X-ray beam scanning are being developed and combined with newly developed diffraction evaluation programs in order to complete entire automation of the data collection. (author)

Smart Factory

DEFF Research Database (Denmark)

Bilberg, Arne; Radziwon, Agnieszka; Grube Hansen, David

2017-01-01

their innovation and competitive advantage by focusing at their competences, strengths and opportunities. The project suggests innovative solutions and business models through collaboration and use of new technologies. In the Smart Factory, SMEs should be able to collaborate on new products, markets and production......, and to target their challenges and ensure sustainable growth and business in these enterprises. Therefore the focus of the Smart Factory project was to support the growth and sustainable development of the small and medium sized manufacturing industry in Denmark. The project focused on SMEs and how to improve......A large part of Danish Industry is based on Small and Medium Sized Enterprises (SMEs), which account for –99% of the companies in Denmark and about two third of the job positions (source: statistikbanken.dk) . That is why, it is so important also to focus research and development at SMEs...

Analysis of scaled-factorial-moment data

International Nuclear Information System (INIS)

Seibert, D.

1990-01-01

We discuss the two standard constructions used in the search for intermittency, the exclusive and inclusive scaled factorial moments. We propose the use of a new scaled factorial moment that reduces to the exclusive moment in the appropriate limit and is free of undesirable multiplicity correlations that are contained in the inclusive moment. We show that there are some similarities among most of the models that have been proposed to explain factorial-moment data, and that these similarities can be used to increase the efficiency of testing these models. We begin by calculating factorial moments from a simple independent-cluster model that assumes only approximate boost invariance of the cluster rapidity distribution and an approximate relation among the moments of the cluster multiplicity distribution. We find two scaling laws that are essentially model independent. The first scaling law relates the moments to each other with a simple formula, indicating that the different factorial moments are not independent. The second scaling law relates samples with different rapidity densities. We find evidence for much larger clusters in heavy-ion data than in light-ion data, indicating possible spatial intermittency in the heavy-ion events

Selective exposure to information: how different modes of decision making affect subsequent confirmatory information processing.

Science.gov (United States)

Fischer, Peter; Fischer, Julia; Weisweiler, Silke; Frey, Dieter

2010-12-01

We investigated whether different modes of decision making (deliberate, intuitive, distracted) affect subsequent confirmatory processing of decision-consistent and inconsistent information. Participants showed higher levels of confirmatory information processing when they made a deliberate or an intuitive decision versus a decision under distraction (Studies 1 and 2). As soon as participants have a cognitive (i.e., deliberate cognitive analysis) or affective (i.e., intuitive and gut feeling) reason for their decision, the subjective confidence in the validity of their decision increases, which results in increased levels of confirmatory information processing (Study 2). In contrast, when participants are distracted during decision making, they are less certain about the validity of their decision and thus are subsequently more balanced in the processing of decision-relevant information.

Confirmatory factor analysis and invariance testing between Blacks and Whites of the Multidimensional Health Locus of Control scale.

Science.gov (United States)

LaNoue, Marianna; Harvey, Abby; Mautner, Dawn; Ku, Bon; Scott, Kevin

2015-07-01

The factor structure of the Multidimensional Health Locus of Control scale remains in question. Additionally, research on health belief differences between Black and White respondents suggests that the Multidimensional Health Locus of Control scale may not be invariant. We reviewed the literature regarding the latent variable structure of the Multidimensional Health Locus of Control scale, used confirmatory factor analysis to confirm the three-factor structure of the Multidimensional Health Locus of Control, and analyzed between-group differences in the Multidimensional Health Locus of Control structure and means across Black and White respondents. Our results indicate differences in means and structure, indicating more research is needed to inform decisions regarding whether and how to deploy the Multidimensional Health Locus of Control appropriately.

Confirmatory factor analysis using Microsoft Excel.

Science.gov (United States)

Miles, Jeremy N V

2005-11-01

This article presents a method for using Microsoft (MS) Excel for confirmatory factor analysis (CFA). CFA is often seen as an impenetrable technique, and thus, when it is taught, there is frequently little explanation of the mechanisms or underlying calculations. The aim of this article is to demonstrate that this is not the case; it is relatively straightforward to produce a spreadsheet in MS Excel that can carry out simple CFA. It is possible, with few or no programming skills, to effectively program a CFA analysis and, thus, to gain insight into the workings of the procedure.

The value of confirmatory testing in early infant HIV diagnosis programmes in South Africa: A cost-effectiveness analysis.

Directory of Open Access Journals (Sweden)

Lorna Dunning

2017-11-01

Full Text Available The specificity of nucleic acid amplification tests (NAATs used for early infant diagnosis (EID of HIV infection is <100%, leading some HIV-uninfected infants to be incorrectly identified as HIV-infected. The World Health Organization recommends that infants undergo a second NAAT to confirm any positive test result, but implementation is limited. Our objective was to determine the impact and cost-effectiveness of confirmatory HIV testing for EID programmes in South Africa.Using the Cost-effectiveness of Preventing AIDS Complications (CEPAC-Pediatric model, we simulated EID testing at age 6 weeks for HIV-exposed infants without and with confirmatory testing. We assumed a NAAT cost of US$25, NAAT specificity of 99.6%, NAAT sensitivity of 100% for infants infected in pregnancy or at least 4 weeks prior to testing, and a mother-to-child transmission (MTCT rate at 12 months of 4.9%; we simulated guideline-concordant rates of testing uptake, result return, and antiretroviral therapy (ART initiation (100%. After diagnosis, infants were linked to and retained in care for 10 years (false-positive or lifelong (true-positive. All parameters were varied widely in sensitivity analyses. Outcomes included number of infants with false-positive diagnoses linked to ART per 1,000 ART initiations, life expectancy (LE, in years and per-person lifetime HIV-related healthcare costs. Both without and with confirmatory testing, LE was 26.2 years for HIV-infected infants and 61.4 years for all HIV-exposed infants; clinical outcomes for truly infected infants did not differ by strategy. Without confirmatory testing, 128/1,000 ART initiations were false-positive diagnoses; with confirmatory testing, 1/1,000 ART initiations were false-positive diagnoses. Because confirmatory testing averted costly HIV care and ART in truly HIV-uninfected infants, it was cost-saving: total cost US$1,790/infant tested, compared to US$1,830/infant tested without confirmatory testing

Dangers of "confirmatory" cancer trials that fail to actually test the original hypothesis.

Science.gov (United States)

Markman, Maurie

2014-04-01

The concept of "confirmatory" studies is a standard and important component of the overall clinical trials strategy in oncology. However, it is critical that such studies are similar enough in basic design and how they are conducted that they actually have the realistic potential to confirm, or refute, objectively the findings of the original study. In this commentary, two examples of clinical studies in the gynecologic oncology arena suggested by some to serve as "confirmatory" trials for the original reports demonstrate both the dangers and potential inappropriateness of such conclusions.

Factorials of real negative and imaginary numbers - A new perspective.

Science.gov (United States)

Thukral, Ashwani K

2014-01-01

Presently, factorials of real negative numbers and imaginary numbers, except for zero and negative integers are interpolated using the Euler's gamma function. In the present paper, the concept of factorials has been generalised as applicable to real and imaginary numbers, and multifactorials. New functions based on Euler's factorial function have been proposed for the factorials of real negative and imaginary numbers. As per the present concept, the factorials of real negative numbers, are complex numbers. The factorials of real negative integers have their imaginary part equal to zero, thus are real numbers. Similarly, the factorials of imaginary numbers are complex numbers. The moduli of the complex factorials of real negative numbers, and imaginary numbers are equal to their respective real positive number factorials. Fractional factorials and multifactorials have been defined in a new perspective. The proposed concept has also been extended to Euler's gamma function for real negative numbers and imaginary numbers, and beta function.

The Tau-Charm Factory in the ERA of B-Factories and CESR

International Nuclear Information System (INIS)

Beers, L.V.; Perl, M.L.

1994-10-01

This paper is a collection of presentations made at a conference on tau-charm factories, held at the Stanford Linear Accelerator Center and Stanford University on August 15-16, 1994. The papers presented summarize the physics which can be learned from such a facility, the advantages it would present over planned B-factories and large centers such as CESR, and the types of decay modes which could be observed. More detailed studies of tau physics are opened up, as well as charmonium and charmed systems. Seperate presentations to the proceedings are indexed individually into the database

The Low-Energy Neutrino Factory

International Nuclear Information System (INIS)

Brass, Alan; Geer, Steve; Ellis, Malcolm; Mena, Olga; Pascoli, Silvia

2008-01-01

To date most studies of Neutrino Factories have focused on facilities where the energy of the muon in the storage ring has been in the range of 25-50 GeV. In this paper we present a concept for a Low-Energy (∼ 4 GeV) neutrino factory. For baselines of O(1000 km), the rich oscillation pattern at low neutrino interaction energy (0.5 - ∼3 GeV) provides the unique performance of this facility with regard to its sensitivity to CP violation and the determination of the neutrino mass hierarchy. A unique neutrino detector is needed, however, in order to exploit this oscillation pattern. We will describe the basic accelerator facility, demonstrate the methodology of the analysis and give an estimate on how well the Low-Energy neutrino factory can measure θ 13 , CP violation and the mass hierarchy. We will also describe the detector concept that is used, show a preliminary analysis regarding its performance and indicate what R and D is still needed. Finally we will show how the Low-Energy neutrino factory could be a step towards an energy frontier muon collider.

The Energy Factory; EnergieFabriek

Energy Technology Data Exchange (ETDEWEB)

Van den Boomen, M.; Van den Dungen, G.J.; Elias, T.; Jansen, M. [Universiteit van Amsterdam UvA, Amsterdam (Netherlands)

2009-05-15

The Energy Factory is a collaboration of 26 Dutch local water boards in which options for energy saving and energy production are examined. According to the authors, the initiative of the Energy Factory will lead to a reframing of the role of the water boards. Moreover, they explain how the PPP concept (People, Planet, Profit) may act as platform for negotiations between actors who are involved in the Energy Factory. In addition, the PPP concept is used to demonstrate that the Energy Factory will lead to larger social involvement, social entrepreneurship and growing profits [Dutch] De Energiefabriek is een samenwerkingsverband van 26 waterschappen in Nederland waarin wordt gezocht naar mogelijkheden om energie te besparen en zelf energie te produceren. Volgens de auteurs van deze notitie leidt het initiatief van de Energiefabriek tot een reframing van de rol van waterschappen. Daarnaast leggen ze uit hoe het PPP-concept (People, Profit, Planet) kan fungeren als platform voor onderhandelingen tussen de actoren die betrokken zijn bij de Energiefabriek. Verder wordt met het PPP-concept aangetoond dat de Energiefabriek leidt tot ruimere maatschappelijke betrokkenheid, maatschappelijk ondernemen en winstvergroting.

Emotional Intelligence and Nurse Recruitment: Rasch and confirmatory factor analysis of the trait emotional intelligence questionnaire short form.

Science.gov (United States)

Snowden, Austyn; Watson, Roger; Stenhouse, Rosie; Hale, Claire

2015-12-01

To examine the construct validity of the Trait Emotional Intelligence Questionnaire Short form. Emotional intelligence involves the identification and regulation of our own emotions and the emotions of others. It is therefore a potentially useful construct in the investigation of recruitment and retention in nursing and many questionnaires have been constructed to measure it. Secondary analysis of existing dataset of responses to Trait Emotional Intelligence Questionnaire Short form using concurrent application of Rasch analysis and confirmatory factor analysis. First year undergraduate nursing and computing students completed Trait Emotional Intelligence Questionnaire-Short Form in September 2013. Responses were analysed by synthesising results of Rasch analysis and confirmatory factor analysis. Participants (N = 938) completed Trait Emotional Intelligence Questionnaire Short form. Rasch analysis showed the majority of the Trait Emotional Intelligence Questionnaire-Short Form items made a unique contribution to the latent trait of emotional intelligence. Five items did not fit the model and differential item functioning (gender) accounted for this misfit. Confirmatory factor analysis revealed a four-factor structure consisting of: self-confidence, empathy, uncertainty and social connection. All five misfitting items from the Rasch analysis belonged to the 'social connection' factor. The concurrent use of Rasch and factor analysis allowed for novel interpretation of Trait Emotional Intelligence Questionnaire Short form. Much of the response variation in Trait Emotional Intelligence Questionnaire Short form can be accounted for by the social connection factor. Implications for practice are discussed. © 2015 John Wiley & Sons Ltd.

Psychometric properties of the Dresden Body Image Questionnaire: A multiple-group confirmatory factor analysis across sex and age in a Dutch non-clinical sample.

Directory of Open Access Journals (Sweden)

Mia Scheffers

Full Text Available Body image has implications for psychosocial functioning and quality of life and its disturbance is reported in a broad range of psychiatric disorders. In view of the lack of instruments in Dutch measuring body image as a broad concept, we set out to make an instrument available that reflects the multidimensional character of this construct by including more dimensions than physical appearance. The Dresden Körperbildfragebogen (DBIQ, Dresden Body Image Questionnaire particularly served this purpose. The DBIQ consists of 35 items and five subscales: body acceptance, sexual fulfillment, physical contact, vitality, and self-aggrandizement. The main objective of the present study was to evaluate the psychometric properties of the Dutch translation of the Dresden Body Image Questionnaire (DBIQ-NL in a non-clinical sample.The psychometric properties of the DBIQ-NL were examined in a non-clinical sample of 988 respondents aged between 18 and 65. We investigated the subscales' internal consistency and test-retest reliability. In order to establish construct validity we evaluated the association with a related construct, body cathexis, and with indices of self-esteem and psychological wellbeing. The factor structure of the DBIQ-NL was examined via confirmatory factor analysis (CFA. The equivalence of the measurement model across sex and age was evaluated by multiplegroup confirmatory factor analyses.Confirmatory factor analyses showed a structure in accordance with the original scale, where model fit was improved significantly by moving one item to another subscale. Multiple group confirmatory factor analysis across sex and age demonstrated partial strong invariance. Internal consistency was good with little overlap between the subscales. Temporal reliability and construct validity were satisfactory.Results indicate that the DBIQ-NL is a reliable and valid instrument for non-clinical subjects. This provides a sound basis for further investigation of the

Psychometric properties of the Dresden Body Image Questionnaire: A multiple-group confirmatory factor analysis across sex and age in a Dutch non-clinical sample.

Science.gov (United States)

Scheffers, Mia; van Duijn, Marijtje A J; Bosscher, Ruud J; Wiersma, Durk; Schoevers, Robert A; van Busschbach, Jooske T

2017-01-01

Body image has implications for psychosocial functioning and quality of life and its disturbance is reported in a broad range of psychiatric disorders. In view of the lack of instruments in Dutch measuring body image as a broad concept, we set out to make an instrument available that reflects the multidimensional character of this construct by including more dimensions than physical appearance. The Dresden Körperbildfragebogen (DBIQ, Dresden Body Image Questionnaire) particularly served this purpose. The DBIQ consists of 35 items and five subscales: body acceptance, sexual fulfillment, physical contact, vitality, and self-aggrandizement. The main objective of the present study was to evaluate the psychometric properties of the Dutch translation of the Dresden Body Image Questionnaire (DBIQ-NL) in a non-clinical sample. The psychometric properties of the DBIQ-NL were examined in a non-clinical sample of 988 respondents aged between 18 and 65. We investigated the subscales' internal consistency and test-retest reliability. In order to establish construct validity we evaluated the association with a related construct, body cathexis, and with indices of self-esteem and psychological wellbeing. The factor structure of the DBIQ-NL was examined via confirmatory factor analysis (CFA). The equivalence of the measurement model across sex and age was evaluated by multiplegroup confirmatory factor analyses. Confirmatory factor analyses showed a structure in accordance with the original scale, where model fit was improved significantly by moving one item to another subscale. Multiple group confirmatory factor analysis across sex and age demonstrated partial strong invariance. Internal consistency was good with little overlap between the subscales. Temporal reliability and construct validity were satisfactory. Results indicate that the DBIQ-NL is a reliable and valid instrument for non-clinical subjects. This provides a sound basis for further investigation of the DBIQ-NL in a

Virtual Factory Testbed

Data.gov (United States)

Federal Laboratory Consortium — The Virtual Factory Testbed (VFT) is comprised of three physical facilities linked by a standalone network (VFNet). The three facilities are the Smart and Wireless...

Photon factory activity report, 1993

International Nuclear Information System (INIS)

1994-01-01

This issue is the annual report of the Photon Factory, National Laboratory of High Energy Physics. First the outline of the Photon Factory is presented. Injector linac, light source, beamlines and instrumentation, synchrotron radiation facility at the Tristan accumulation ring, and the Tristan super light facility are described in detail. The facility is open to researchers. The user's reports are collected as well. (J.P.N.)

General B factory design considerations

International Nuclear Information System (INIS)

Zisman, M.S.

1992-12-01

We describe the general considerations that go into the design of an asymmetric B factory collider. Justification is given for the typical parameters of such a facility, and the physics and technology challenges that arise from these parameter choices are discussed. Cost and schedule issues for a B factory are discussed briefly. A summary of existing proposals is presented, noting their similarities and differences

75 FR 77675 - AREVA NP, Inc.; Confirmatory Order (Effective Immediately)

Science.gov (United States)

2010-12-13

... cause. VI Any person adversely affected by this Confirmatory Order, other than AREVA, may request a..., appropriate notification of regulatory authorities, safety culture and safety conscious work environment...., outside the global AREVA organization), safety culture assessment in accordance with an accepted nuclear...

Photon Factory Activity Report, 1994

Energy Technology Data Exchange (ETDEWEB)

NONE

1995-12-31

Photon Factory Activity Report no.12 deals with our activities in the period from October 1993 through September 1994. We operate two light sources at the Photon Factory; the 2.5-GeV Photon Factory storage ring, which is a dedicated light source, and the 6.5-GeV TRISTAN Accumulation Ring, which is parasitically used as a light source. We keep more than seventy experimental stations at two facilities, and accept experiments primarily according to approval by the Program Advisory Committee. The number of proposals to the Photon Factory has been still growing. Three-hundred eighty two proposals were approved by the PAC in FY1994, which is an increase by thirteen percent compared to the previous year. Remarkable was growth in biology proposals, particularly proposals in protein crystallography. In FY 1994, we accepted approximately 20,000 man-days as general users, and almost ten percent of them were from abroad. We always open the facility to users, not only domestic but also international. Recently we have been concentrating our effort to upgrading of the light sources and reconstruction of the experimental stations to keep the Photon Factory an attractive research facility in the forthcoming years. We have already started a program of reducing the emittance of the 2.5-GeV storage ring, which now operates with an emittance of 110 nm-rad, to 27 nm-rad by modifying the lattice, with the goal of operation at the reduced emittance in the fall of 1997. We also have conceived of a conversion of the TRISTAN Accumulation Ring to a dedicated light source of high energies. The on-going TRISTAN project will terminate by the end of 1995, and the TRISTAN Main Ring will be converted to a new B-Factory. At this moment, the TRISTAN Accumulation Ring will be disused as the injector to the Main Ring, and conversion of the AR to a dedicated light source becomes possible. (J.P.N.)

Photon Factory Activity Report, 1994

Energy Technology Data Exchange (ETDEWEB)

NONE

1996-12-31

Photon Factory Activity Report no.12 deals with our activities in the period from October 1993 through September 1994. We operate two light sources at the Photon Factory; the 2.5-GeV Photon Factory storage ring, which is a dedicated light source, and the 6.5-GeV TRISTAN Accumulation Ring, which is parasitically used as a light source. We keep more than seventy experimental stations at two facilities, and accept experiments primarily according to approval by the Program Advisory Committee. The number of proposals to the Photon Factory has been still growing. Three-hundred eighty two proposals were approved by the PAC in FY1994, which is an increase by thirteen percent compared to the previous year. Remarkable was growth in biology proposals, particularly proposals in protein crystallography. In FY 1994, we accepted approximately 20,000 man-days as general users, and almost ten percent of them were from abroad. We always open the facility to users, not only domestic but also international. Recently we have been concentrating our effort to upgrading of the light sources and reconstruction of the experimental stations to keep the Photon Factory an attractive research facility in the forthcoming years. We have already started a program of reducing the emittance of the 2.5-GeV storage ring, which now operates with an emittance of 110 nm-rad, to 27 nm-rad by modifying the lattice, with the goal of operation at the reduced emittance in the fall of 1997. We also have conceived of a conversion of the TRISTAN Accumulation Ring to a dedicated light source of high energies. The on-going TRISTAN project will terminate by the end of 1995, and the TRISTAN Main Ring will be converted to a new B-Factory. At this moment, the TRISTAN Accumulation Ring will be disused as the injector to the Main Ring, and conversion of the AR to a dedicated light source becomes possible. (J.P.N.)

Photon Factory Activity Report, 1994

International Nuclear Information System (INIS)

1995-01-01

Photon Factory Activity Report no.12 deals with our activities in the period from October 1993 through September 1994. We operate two light sources at the Photon Factory; the 2.5-GeV Photon Factory storage ring, which is a dedicated light source, and the 6.5-GeV TRISTAN Accumulation Ring, which is parasitically used as a light source. We keep more than seventy experimental stations at two facilities, and accept experiments primarily according to approval by the Program Advisory Committee. The number of proposals to the Photon Factory has been still growing. Three-hundred eighty two proposals were approved by the PAC in FY1994, which is an increase by thirteen percent compared to the previous year. Remarkable was growth in biology proposals, particularly proposals in protein crystallography. In FY 1994, we accepted approximately 20,000 man-days as general users, and almost ten percent of them were from abroad. We always open the facility to users, not only domestic but also international. Recently we have been concentrating our effort to upgrading of the light sources and reconstruction of the experimental stations to keep the Photon Factory an attractive research facility in the forthcoming years. We have already started a program of reducing the emittance of the 2.5-GeV storage ring, which now operates with an emittance of 110 nm-rad, to 27 nm-rad by modifying the lattice, with the goal of operation at the reduced emittance in the fall of 1997. We also have conceived of a conversion of the TRISTAN Accumulation Ring to a dedicated light source of high energies. The on-going TRISTAN project will terminate by the end of 1995, and the TRISTAN Main Ring will be converted to a new B-Factory. At this moment, the TRISTAN Accumulation Ring will be disused as the injector to the Main Ring, and conversion of the AR to a dedicated light source becomes possible. (J.P.N.)

STANFORD (SLAC): B factory construction begins

Energy Technology Data Exchange (ETDEWEB)

Anon.

1994-03-15

At a ceremony marking the start of construction, members of the US Congress and Secretary of Energy Hazel O'Leary hailed the new Asymmetric B Factory as the key to continued vitality of the Stanford Linear Accelerator Center (SLAC). Being built in collaboration with the Lawrence Berkeley Laboratory and the Lawrence Livermore National Laboratory, the B factory is a $177 million upgrade of the existing PEP electron-positron collider. Scheduled for completion in 1998, the B factory will generate many millions of B mesons, allowing, among other physics, an intensive search for the phenomena of CP violation in the decays of these particles.

Deficits and Solutions in the Development of Modular Factory Systems

OpenAIRE

Achim Kampker; Peter Burggräf; Moritz Krunke; Hanno Voet

2017-01-01

As a reaction to current challenges in factory planning, many companies think about introducing factory standards to lower planning times and decrease planning costs. If these factory standards are set-up with a high level of modularity, they are defined as modular factory systems. This paper deals with the main current problems in the application of modular factory systems in practice and presents a solution approach with its basic models. The methodology is based on methods from factory pla...

Automated Sample Exchange Robots for the Structural Biology Beam Lines at the Photon Factory

International Nuclear Information System (INIS)

Hiraki, Masahiko; Watanabe, Shokei; Yamada, Yusuke; Matsugaki, Naohiro; Igarashi, Noriyuki; Gaponov, Yurii; Wakatsuki, Soichi

2007-01-01

We are now developing automated sample exchange robots for high-throughput protein crystallographic experiments for onsite use at synchrotron beam lines. It is part of the fully automated robotics systems being developed at the Photon Factory, for the purposes of protein crystallization, monitoring crystal growth, harvesting and freezing crystals, mounting the crystals inside a hutch and for data collection. We have already installed the sample exchange robots based on the SSRL automated mounting system at our insertion device beam lines BL-5A and AR-NW12A at the Photon Factory. In order to reduce the time required for sample exchange further, a prototype of a double-tonged system was developed. As a result of preliminary experiments with double-tonged robots, the sample exchange time was successfully reduced from 70 seconds to 10 seconds with the exception of the time required for pre-cooling and warming up the tongs

Neutrino Factory: status and prospects

International Nuclear Information System (INIS)

Long, K.

2011-01-01

The properties of the neutrino provide a unique window on physics beyond that described by the Standard Model. The study of sub-leading effects in neutrino oscillations has begun with the race to measure θ 13 consensus is emerging within the international community that a novel neutrino source is required to allow sensitive searches for leptonic CP violation to be carried out and the neutrino mass-hierarchy to be determined. The Neutrino Factory, in which intense neutrino beams are produced from the decay of muons, has been shown to out-perform the other proposed facilities. The physics case for the Neutrino Factory will be reviewed and the baseline design of the facility being developed by the International Design Study for the Neutrino Factory (the IDS-NF) collaboration will be described.

Steps towards the Neutrino Factory

International Nuclear Information System (INIS)

Long, K.

2012-01-01

The properties of the neutrino provide a unique window on physics beyond that described by the Standard Model. The study of sub-leading effects in neutrino oscillations has begun with the race to measure θ 13 . A consensus is emerging within the international community that a novel neutrino source is required to allow sensitive searches for leptonic CP violation to be carried out and the neutrino mass-hierarchy to be determined. The Neutrino Factory, in which intense neutrino beams are produced from the decay of muons, has been shown to out-perform the other proposed facilities. The physics case for the Neutrino Factory will be reviewed and the baseline design of the facility being developed by the International Design Study for the Neutrino Factory (the IDS-NF) collaboration will be described.

Development of a Body Image Concern Scale using both exploratory and confirmatory factor analyses in Chinese university students

Directory of Open Access Journals (Sweden)

He W

2017-05-01

Full Text Available Wenxin He, Qiming Zheng, Yutian Ji, Chanchan Shen, Qisha Zhu, Wei Wang Department of Clinical Psychology and Psychiatry, School of Public Health, Zhejiang University College of Medicine, Hangzhou, People’s Republic of China Background: The body dysmorphic disorder is prevalent in general population and in psychiatric, dermatological, and plastic-surgery patients, but there lacks a structure-validated, comprehensive self-report measure of body image concerns, which is established through both exploratory and confirmatory factor analyses. Methods: We have composed a 34-item matrix targeting the body image concerns and trialed it in 328 male and 365 female Chinese university students. Answers to the matrix dealt with treatments including exploratory factor analyses, reserve of qualified items, and confirmatory factor analyses of latent structures. Results: Six latent factors, namely the Social Avoidance, Appearance Dissatisfaction, Preoccupation with Reassurance, Perceived Distress/Discrimination, Defect Hiding, and Embarrassment in Public, were identified. The factors and their respective items have composed a 24-item questionnaire named as the Body Image Concern Scale. Each factor earned a satisfactory internal reliability, and the intercorrelations between these factors were in a median level. Women scored significantly higher than men did on the Appearance Dissatisfaction, Preoccupation with Reassurance, and Defect Hiding. Conclusion: The Body Image Concern Scale has displayed its structure validation and gender preponderance in Chinese university students. Keywords: body dysmorphic disorder, body image, factor analysis, questionnaire development

Cross-validation of the factorial structure of the Neighborhood Environment Walkability Scale (NEWS) and its abbreviated form (NEWS-A)

Science.gov (United States)

The Neighborhood Environment Walkability Scale (NEWS) and its abbreviated form (NEWS-A) assess perceived environmental attributes believed to influence physical activity. A multilevel confirmatory factor analysis (MCFA) conducted on a sample from Seattle, WA, showed that, at the respondent level, th...

Photon factory activity report, 1992

International Nuclear Information System (INIS)

1993-01-01

This issue is the annual report of the Photon Factory, National laboratory of High Energy Physics. First, the outline of the Photon Factory is presented. Injector linac, light source, beamlines and instrumentation, the Tristan synchrotron radiation facility at the accumulation ring, and the Tristan super light facility are described in detail. The facility is open to researchers. The user's reports are collected as well. (J.P.N.) (435 refs.)

Muon colliders and neutrino factories

Energy Technology Data Exchange (ETDEWEB)

Geer, S.; /Fermilab

2010-09-01

Over the last decade there has been significant progress in developing the concepts and technologies needed to produce, capture and accelerate {Omicron}(10{sup 21}) muons/year. This development prepares the way for a new type of neutrino source (Neutrino Factory) and a new type of very high energy lepton-antilepton collider (Muon Collider). This article reviews the motivation, design and R&D for Neutrino Factories and Muon Colliders.

A Confirmatory Factor Analysis of Reilly's Role Overload Scale

Science.gov (United States)

Thiagarajan, Palaniappan; Chakrabarty, Subhra; Taylor, Ronald D.

2006-01-01

In 1982, Reilly developed a 13-item scale to measure role overload. This scale has been widely used, but most studies did not assess the unidimensionality of the scale. Given the significance of unidimensionality in scale development, the current study reports a confirmatory factor analysis of the 13-item scale in two samples. Based on the…

A confirmatory study of the Combined Index of Severity of Fibromyalgia (ICAF*: factorial structure, reliability and sensitivity to change

Directory of Open Access Journals (Sweden)

Rejas Javier

2011-06-01

Full Text Available Abstract Background Fibromyalgia (FM is a complex syndrome that affects many aspects of the patients life and it is very difficult to evaluate in clinical practice. A recent study has developed the Combined Index of Severity of Fibromyalgia (ICAF, an instrument that evaluates diverse aspects of FM and offers five indices: emotional, physical, active coping, passive coping and total. The objective of this study is to confirm the structure of the ICAF, check its test-retest reliability, assess its sensitivity to change, and compare the results obtained in a sample of patients with fibromyalgia with another sample of healthy controls. Methods A total of 232 patients took part in the study, 228 women and 4 men, with a mean age of 47.73 years of age (SD = 8.61 and a time of disease evolution since diagnosis of 4.28 years (SD = 4.03. The patients from the FM group completed the ICAF. Between one and two weeks later, they again attended the clinic and complete the 59 items on the ICAF (retest and immediately afterwards they began treatment (according to daily clinical practice criteria. A sample of healthy subjects was also studied as a control group: 110 people were included (106 women and 4 men with a mean age of 46.01 years of age (SD = 9.35. The study was conducted in Spain. Results The results obtained suggest that the four-factor model obtained in the previous study adequately fits the data obtained in this study. The test-retest reliability and internal consistency were all significant and show a high degree of correlation for all the factors as well as in overall score. With the exception of the passive coping factor, all the other scores, including the overall score, were sensitive to change after the therapeutic intervention. The ICAF scores of the patients with fibromyalgia compared with those of the control group were markedly different. Conclusions The findings suggest that the ICAF is a valid, reliable, sensitive to change instrument with

A confirmatory study of the Combined Index of Severity of Fibromyalgia (ICAF*): factorial structure, reliability and sensitivity to change

Science.gov (United States)

2011-01-01

Background Fibromyalgia (FM) is a complex syndrome that affects many aspects of the patients life and it is very difficult to evaluate in clinical practice. A recent study has developed the Combined Index of Severity of Fibromyalgia (ICAF), an instrument that evaluates diverse aspects of FM and offers five indices: emotional, physical, active coping, passive coping and total. The objective of this study is to confirm the structure of the ICAF, check its test-retest reliability, assess its sensitivity to change, and compare the results obtained in a sample of patients with fibromyalgia with another sample of healthy controls. Methods A total of 232 patients took part in the study, 228 women and 4 men, with a mean age of 47.73 years of age (SD = 8.61) and a time of disease evolution since diagnosis of 4.28 years (SD = 4.03). The patients from the FM group completed the ICAF. Between one and two weeks later, they again attended the clinic and complete the 59 items on the ICAF (retest) and immediately afterwards they began treatment (according to daily clinical practice criteria). A sample of healthy subjects was also studied as a control group: 110 people were included (106 women and 4 men) with a mean age of 46.01 years of age (SD = 9.35). The study was conducted in Spain. Results The results obtained suggest that the four-factor model obtained in the previous study adequately fits the data obtained in this study. The test-retest reliability and internal consistency were all significant and show a high degree of correlation for all the factors as well as in overall score. With the exception of the passive coping factor, all the other scores, including the overall score, were sensitive to change after the therapeutic intervention. The ICAF scores of the patients with fibromyalgia compared with those of the control group were markedly different. Conclusions The findings suggest that the ICAF is a valid, reliable, sensitive to change instrument with the added advantage

STANFORD (SLAC): B factory construction begins

International Nuclear Information System (INIS)

Anon.

1994-01-01

At a ceremony marking the start of construction, members of the US Congress and Secretary of Energy Hazel O'Leary hailed the new Asymmetric B Factory as the key to continued vitality of the Stanford Linear Accelerator Center (SLAC). Being built in collaboration with the Lawrence Berkeley Laboratory and the Lawrence Livermore National Laboratory, the B factory is a $177 million upgrade of the existing PEP electron-positron collider. Scheduled for completion in 1998, the B factory will generate many millions of B mesons, allowing, among other physics, an intensive search for the phenomena of CP violation in the decays of these particles

Engineering the Polyketide Cell Factory

DEFF Research Database (Denmark)

Mølgaard, Louise

sufficient titers. To improve the production of polyketides biological engineering principles have been applied for the development and engineering of microbial polyketide cell factories. The two biological hosts used for heterologous polyketide production were Aspergillus nidulans and Saccharomyces...... phosphopantetheinylase (PPTase). This versatile vector system can easily be used for expression of other polyketides of interest as well as extended to express whole gene clusters. After achieving proof of principle in terms of expression, the polyketide cell factory must be optimized. The optimization can be achieved...... characterization in bioreactors revealed that the yields of 6-MSA on biomass increased albeit not significantly. As a result of this it may be argued that there is still more work to be done in terms of model building in A. nidulans. Utilizing another well-established cell factory S. cerevisiae the capabilities...

Photon Factory activity report, 1991

International Nuclear Information System (INIS)

1992-01-01

The Photon Factory is a national synchrotron radiation research facility affiliated with the National Laboratory for High Energy Physics located in Tsukuba Science City. The Photon Factory consists of a 2.5 GeV electron/positron linear accelerator, a 2.5 GeV electron/positron storage ring, beam lines and experimental stations. All the facilities for synchrotron radiation research are open to scientists. A part of the accumulation ring of the TRISTAN main ring has been used as a synchrotron radiation source in the energy range from 5.8 to 6.5 GeV. The Photon Factory is composed of three divisions of Injector Linac, Light Source and Instrumentation. The researches of each divisions are reviewed, and the users' short reports are collected. The list of published papers with author index is also included in the publication. (K.I.) 233 refs

INDOOR THERMAL CONDITION OF FACTORY BUILDING IN BANGLADESH

Directory of Open Access Journals (Sweden)

Muhammed Abdullah Al Sayem Khan

2011-12-01

Full Text Available Bangladesh is a developing country and has a lot of factories for different products for local use and also export to abroad. Garments industries are one of the top most items of exported items. A huge number of populations are working in garments industries. But these factories are not well designed in sense of the thermal environment. Workers experiences sickness related to indoor environment. The productions of these factories are affected due to employees’ health condition. The research is done in two different methods. One is empirical data collection using thermal data loggers and the other is questionnaire survey on the spots for three factory buildings. The field study was conducted in four different months of the same year during winter and summer period. Expected findings of this research are that the indoor environment is not comfortable for works at day time during summer season. This research will help the factory workers in providing a comfortable thermal environment and also help the employers or factory owners to increase their production margin.

Atomic Energy (factories) rules: 1988

International Nuclear Information System (INIS)

1988-01-01

These rules are made by the Central Government under the Factories Act, 1948 and extend to all factories engaged in carrying out the purposes of the Atomic Energy Act, 1962. The rules cover the requirements of inspecting staff, health aspects, personnel safety, personnel welfare, working hours, employment of young persons, special provisions in case of dangerous manufacturing processes or operations, supplemental rules for administrative aspects and special powers of competent authority. (M.G.B.)

Flow-based approach for holistic factory engineering and design

OpenAIRE

Constantinescu, C.; Westkämper, E.

2010-01-01

The engineering of future factories requires digital tools along life cycle phases from investment planning to ramp-up. Manufacturers need scientific-based integrated highly dynamic data management systems for the participative and integrated factory planning. The paper presents a new approach for the continuously integrated product design, factory and process planning, through a service-oriented architecture for the implementation of digital factory tools. A first prototype of the digital fa...

Positron Factory project

Energy Technology Data Exchange (ETDEWEB)

Okada, Sohei; Sunaga, Hiromi; Kaneko, Hirohisa; Kawasuso, Atsuo; Masuno, Shin-ichi; Takizawa, Haruki; Yotsumoto, Keiichi [Japan Atomic Energy Research Inst., Takasaki, Gunma (Japan). Takasaki Radiation Chemistry Research Establishment

1997-03-01

We have started drafting a construction program for the Positron Factory, in which linac-based intense monoenergetic positron beams are planned to be applied for materials science, biotechnology and basic physics and chemistry. A technical survey study confirmed the feasibility of manufacturing a dedicated electron linac of 100 kW class with a beam energy of 100 MeV, which will produce a world-highest monoenergetic positron beam of more than 10{sup 10}/sec in intensity. A self-driven rotating converter (electrons to positrons and photons) suitable for the high power electron beam was devised and successfully tested. The practicability of simultaneous extraction of multi-channel monoenergetic positron beams with multiple moderator assemblies, which had been originated on the basis of a Monte Carlo simulation, was demonstrated by an experiment using an electron linac. An efficient moderator structure, which is composed of honeycomb-like assembled moderator foils and reflectors, is also proposed. (author)

Factorial validity of the Personality Adjective Checklist in a Dutch-speaking sample.

Science.gov (United States)

Van den Broeck, Joke; Bastiaansen, Leen; Rossi, Gina; Dierckx, Eva; Mikolajczak-Degrauwe, Kalina; Hofmans, Joeri

2014-01-01

We examined the factorial structure of the Dutch version of the Personality Adjective Checklist (PACL-D) in a Belgian sample of 3,012 community-dwelling adults. Exploratory factor analyses revealed a 5-factor structure (Neurotic, Aggressive/Dominant, Introverted vs. Extraverted, Conscientious, and Cooperative), that showed considerable overlap with 3 of the Big Five factors (i.e., Neuroticism, Extraversion, and Conscientiousness). Moreover, the 5-factor structure closely resembled the structure found in the original American PACL and was equivalent across gender and age.

Team table: a framework and tool for continuous factory planning

Science.gov (United States)

Sihn, Wilfried; Bischoff, Juergen; von Briel, Ralf; Josten, Marcus

2000-10-01

Growing market turbulences and shorter product life cycles require a continuous adaptation of factory structures resulting in a continuous factory planning process. Therefore a new framework is developed which focuses on configuration and data management process integration. This enable an online system performance evaluation based on continuous availability of current data. The use of this framework is especially helpful and will guarantee high cost and time savings, when used in the early stages of the planning, called the concept or rough planning phase. The new framework is supported by a planning round table as a tool for team-based configuration processes integrating the knowledge of all persons involved in planning processes. A case study conducted at a German company shows the advantages which can be achieved by implementing the new framework and methods.

Math for the digital factory

CERN Document Server

Hömberg, Dietmar; Landry, Chantal

2017-01-01

This volume provides a unique collection of mathematical tools and industrial case studies in digital manufacturing. It addresses various topics, ranging from models of single production technologies, production lines, logistics and workflows to models and optimization strategies for energy consumption in production. The digital factory represents a network of digital models and simulation and 3D visualization methods for the holistic planning, realization, control and ongoing improvement of all factory processes related to a specific product. In the past ten years, all industrialized countries have launched initiatives to realize this vision, sometimes also referred to as Industry 4.0 (in Europe) or Smart Manufacturing (in the United States). Its main goals are • reconfigurable, adaptive and evolving factories capable of small-scale production • high-performance production, combining flexibility, productivity, precision and zero defects • energy and resource efficiency in manufacturing None of these...

Estructura factorial y consistencia interna de la Utrech Work Engagement Scale (UWES 17 entre trabajadores sanitarios de Chile (Factorial Structura and Structura and Internal Consistency of the Utrech Work Engagement Scale (UWES 17 Among Health Workers of Chile

Directory of Open Access Journals (Sweden)

Ralph Müller Gilchrist

2013-12-01

Full Text Available RESUMEN: Con la finalidad de aportar evidencias de validez y confiabilidad de los instrumentos para evaluar calidad de vida laboral, el presente estudio evalúa la estructura factorial y la confiabilidad de la escala UWES-17 que mide Engagement o compromiso laboral. Se encuestó a 165 trabajadores de la salud chilenos, de distintas disciplinas sanitarias y calidad contractual, siendo la mayoría mujeres (70.30% y profesionales no médicos (27.88%. A través de un Análisis Factorial Exploratorio, se identificó dos factores: Involucramiento con el trabajo y Entusiasmo por el trabajo, evidenciando confiabilidad suficiente. El estudio evidencia que la escala UWES-17, considerando la estructura factorial antes mencionada, presenta adecuadas propiedades psicométricas para ser utilizadas en trabajadores sanitarios chilenos, lo que apoya su uso para investigar este fenómeno laboral. ABSTRACT: In order to provide evidence of validity and reliability of the instruments to evaluate the quality of working life, this study assesses the factorial structure and the reliability of the UWES-17 scale, measuring Engagement or employment commitment. A group of 165 Chilean Health workers were surveyed from various health disciplines and contract quality, the majority being women (70.30% and non-medical professionals (27.88%. Through a Factorial Exploratory Analysis, we identified two factors: involvement with work and enthusiasm for work, demonstrating sufficient reliability. The study shows that the UWES-17 scale, considering the factorial structure referred to above, presents appropriate psychometric properties to be used in Chilean health workers, which supports its use to investigate this laboral phenomenon.

A Tau-Charm Factory at CEBAF

Energy Technology Data Exchange (ETDEWEB)

Seth, K.K. [Northwestern Univ., Evanston, IL (United States)

1994-04-01

It is proposed that a Tau Charm Factory represents a natural extension of CEBAF into higher energy domains. The exciting nature of the physics of charm quarks and tau leptons is briefly reviewed and it is suggested that the concept of a linac-ring collider as a Tau Charm Factory at CEBAF should be seriously studied.

Confirmatory factor analysis of the Malay version comprehensive feeding practices questionnaire tested among mothers of primary school children in Malaysia.

Science.gov (United States)

Shohaimi, Shamarina; Wei, Wong Yoke; Shariff, Zalilah Mohd

2014-01-01

Comprehensive feeding practices questionnaire (CFPQ) is an instrument specifically developed to evaluate parental feeding practices. It has been confirmed among children in America and applied to populations in France, Norway, and New Zealand. In order to extend the application of CFPQ, we conducted a factor structure validation of the translated version of CFPQ (CFPQ-M) using confirmatory factor analysis among mothers of primary school children (N = 397) in Malaysia. Several items were modified for cultural adaptation. Of 49 items, 39 items with loading factors >0.40 were retained in the final model. The confirmatory factor analysis revealed that the final model (twelve-factor model with 39 items and 2 error covariances) displayed the best fit for our sample (Chi-square = 1147; df = 634; P Malaysia. The present study extends the usability of the CFPQ and enables researchers and parents to better understand the relationships between parental feeding practices and related problems such as childhood obesity.

40 CFR 86.1847-01 - Manufacturer in-use verification and in-use confirmatory testing; submittal of information and...

Science.gov (United States)

2010-07-01

... laboratory equipment calibrations and verifications as prescribed by subpart B of this part or by good... in-use confirmatory testing; submittal of information and maintenance of records. 86.1847-01 Section... confirmatory testing; submittal of information and maintenance of records. (a) The manufacturer who conducts or...

Estructura factorial y consistencia interna de una versión española del Purpose-In-Life Test / Factorial Structure and Internal Consistency of a Spanish Version of the Purpose-In-Life Test

Directory of Open Access Journals (Sweden)

Joaquín García-Alandete

2013-06-01

Full Text Available El objetivo de este trabajo fue examinar la estructura factorial y la consistencia interna de la versión española del Purpose-In-Life Test, instrumento que mide el logro de sentido de la vida desde los supuestos de la logoterapia. En el estudio participaron 457 universitarios españoles (320 mujeres, 137 hombres de 18 a 55 años de edad, M = 21.80, DE = 4.56. Se realizaron análisis descriptivos y correlaciones entre los ítems y el total de la escala inicial, un análisis factorial exploratorio, la estimación de la consistencia interna de los factores y de la escala obtenida, el análisis factorial confirmatorio de la misma, la prueba t para comparación de medias entre mujeres y hombres y la prueba de Kruskal-Wallis para el efecto de la edad. Los resultados mostraron una estructura de dos factores correlacionados con aceptable consistencia interna de la escala y de los factores, diferencias significativas entre mujeres y hombres en la puntuación total y uno de los factores, y no significativas en función de la edad. El análisis factorial confirmatorio muestra un adecuado ajuste, apoyando el modelo propuesto.

Determinants of Chronic Respiratory Symptoms among Pharmaceutical Factory Workers

Directory of Open Access Journals (Sweden)

Sahle Asfaw

2018-01-01

Full Text Available Background. Chronic respiratory symptoms including chronic cough, chronic phlegm, wheezing, shortness of breath, and chest pain are manifestations of respiratory problems which are mainly evolved as a result of occupational exposures. This study aims to assess determinants of chronic respiratory symptoms among pharmaceutical factory workers. Methods. A case control study was carried out among 453 pharmaceutical factory workers with 151 cases and 302 controls. Data was collected using pretested and structured questionnaire. The data was analyzed using descriptive statistics and bivariate and multivariate analysis. Result. Previous history of chronic respiratory diseases (AOR = 3.36, 95% CI = 1.85–6.12, family history of chronic respiratory diseases (AOR = 2.55, 95% CI = 1.51–4.32, previous dusty working environment (AOR = 2.26, 95% CI = 1.07–4.78, ever smoking (AOR = 3.66, 95% CI = 1.05–12.72, and service years (AOR = 1.86, 95% CI = 1.16–2.99 showed statistically significant association with chronic respiratory symptoms. Conclusion. Previous history of respiratory diseases, family history of chronic respiratory diseases, previous dusty working environment, smoking, and service years were determinants of chronic respiratory symptoms. Public health endeavors to prevent the burden of chronic respiratory symptoms among pharmaceutical factory workers should target the reduction of adverse workplace exposures and discouragement of smoking.

Readiness for self-directed change in professional behaviours: factorial validation of the Self-Reflection and Insight Scale.

Science.gov (United States)

Roberts, Chris; Stark, Patsy

2008-11-01

Self-reflection, the practice of inspecting and evaluating one's own thoughts, feelings and behaviour, and insight, the ability to understand one's own thoughts, feelings and behaviour, are central to the self-regulation of behaviours. The Self-Reflection and Insight Scale (SRIS) measures three factors in the self-regulation cycle: need for reflection; engagement in reflection, and insight. We used structural equation modelling to undertake a confirmatory factor analysis of the SRIS. We re-specified our model to analyse all of the data to explain relationships between the SRIS, medical student characteristics, and responses to issues of teaching and learning in professionalism. The factorial validity of a modified SRIS showed all items loading significantly on their expected factors, with a good fit to the data. Each subscale had good internal reliability (> 0.8). There was a strong relationship between the need for reflection and engagement in reflection (r = 0.77). Insight was related to need for reflection (0.22) and age (0.21), but not to the process of engaging in reflection (0.06). Validation of the SRIS provides researchers with a new instrument with which to measure and investigate the processes of self-reflection and insight in the context of students' self-regulation of their professionalism. Insight is related to the motive or need for reflection, but the process of reflection does not lead to insight. Attending to feelings is an important and integral aspect of self-reflection and insight. Effective strategies are needed to develop students' insight as they reflect on their professionalism.

Threat and Selective Exposure: The Moderating Role of Threat and Decision Context on Confirmatory Information Search after Decisions

Science.gov (United States)

Fischer, Peter; Kastenmuller, Andreas; Greitemeyer, Tobias; Fischer, Julia; Frey, Dieter; Crelley, David

2011-01-01

Previous studies on the impact of perceived threat on confirmatory information search (selective exposure) in the context of decision making have yielded mixed results. Some studies have suggested that confirmatory information search is reduced, yet others have found contradictory effects. The present series of 5 studies consistently found that…

Suitability of a three-dimensional model to measure empathy and its relationship with social and normative adjustment in Spanish adolescents: a cross-sectional study.

Science.gov (United States)

Herrera-López, Mauricio; Gómez-Ortiz, Olga; Ortega-Ruiz, Rosario; Jolliffe, Darrick; Romera, Eva M

2017-09-25

(1) To examine the psychometric properties of the Basic Empathy Scale (BES) with Spanish adolescents, comparing a two and a three-dimensional structure;(2) To analyse the relationship between the three-dimensional empathy and social and normative adjustment in school. Transversal and ex post facto retrospective study. Confirmatory factorial analysis, multifactorial invariance analysis and structural equations models were used. 747 students (51.3% girls) from Cordoba, Spain, aged 12-17 years (M=13.8; SD=1.21). The original two-dimensional structure was confirmed (cognitive empathy, affective empathy), but a three-dimensional structure showed better psychometric properties, highlighting the good fit found in confirmatory factorial analysis and adequate internal consistent valued, measured with Cronbach's alpha and McDonald's omega. Composite reliability and average variance extracted showed better indices for a three-factor model. The research also showed evidence of measurement invariance across gender. All the factors of the final three-dimensional BES model were direct and significantly associated with social and normative adjustment, being most strongly related to cognitive empathy. This research supports the advances in neuroscience, developmental psychology and psychopathology through a three-dimensional version of the BES, which represents an improvement in the original two-factorial model. The organisation of empathy in three factors benefits the understanding of social and normative adjustment in adolescents, in which emotional disengagement favours adjusted peer relationships. Psychoeducational interventions aimed at improving the quality of social life in schools should target these components of empathy. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2017. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

Estructura factorial del inventario Leisure Coping Belief Scale en una muestra mexicana (Structure Factor of the Leisure Coping Belief Scale Inventory in a Mexican Sample

Directory of Open Access Journals (Sweden)

Minerva Vanegas-Farfano

2014-12-01

Full Text Available Resumen Los pasatiempos, vistos como actividades que fomentan el desarrollo de habilidades, aptitudes y redes sociales, fuera de la escuela o el trabajo, presentan opciones físicas, intelectuales y económicas, capaces de apoyar el desarrollo personal y el manejo del estrés en todo tipo de poblaciones. Por ello, este estudio analiza las propiedades psicométricas de cuatro subescalas del cuestionario Leisure Coping Belief Scale (LCBS en 132 adultos de población mexicana. El análisis factorial apoya su dimensionalidad y estructura factorial en cuatro factores, como en el modelo original. La consistencia interna del inventario refleja una adecuada confiabilidad. Se evidencia que la LCBS-M es una medida válida y fiable para continuar realizando estudios sobre las creencias en torno al uso de los pasatiempos como estrategias de afrontamiento en adultos mexicanos. Abstract Hobbies, seen as activities that promote the development of abilities, skills, and social networks, outside of school or work, present physical, intellectual and economic options, able to support the personal development and stress management in all types of populations. Therefore, this study analyzes the psychometric properties of four subscales of the questionnaire Leisure Coping Belief Scale (LCBS in 132 adults of Mexican population. The factorial analysis supports its dimensionality and factorial structure in four factors, such as in the original model. The internal consistency of the inventory reflects adequate reliability. It is evident that the LCBS-M is a valid and reliable measure to continue the studies on beliefs about the use of the hobbies as coping strategies in Mexican adults.

Bunch-motion feedback for B-factories

International Nuclear Information System (INIS)

Lambertson, G.R.

1992-09-01

The colliding electron and positron beams in a B-factory must have average current of one ampere or more to produce the required luminosity. The high current interacts with structures in the beam tube to drive strong coupled-bunch (c.b.) instabilities. To suppress these instabilities requires negative feedback of the bunch motions. Beam impedances arising from strong rf cavity modes should first be reduced to make the required feedback damping rate practical and the cost economical. In what follows, control of transverse motions will be discussed first, then longitudinal. We shall use the parameters of the 3.1 GeV ring of PEP-II to illustrate the general requirements

The Factorial Structure of Four Temperament Styles and Measurement Invariance across Gender and Age Groups

Science.gov (United States)

Rowinski, Tomasz; Cieciuch, Jan; Oakland, Thomas

2014-01-01

The Polish Temperament Styles Questionnaire (PTSQ), derived from Student Style Questionnaire (SSQ) was developed to measure four bipolar temperament styles: extroverted versus introverted, practical versus imaginative, thinking versus feeling, and organized versus flexible. The study focuses on factorial validity and measurement invariance…

Gene structure, expression pattern and interaction of Nuclear Factor-Y family in castor bean (Ricinus communis).

Science.gov (United States)

Wang, Yue; Xu, Wei; Chen, Zexi; Han, Bing; Haque, Mohammad E; Liu, Aizhong

2018-03-01

Nuclear Factor-Y transcription factors, which function in regulating seed development (including storage reservoir accumulation) and responding to abiotic stresses, were identified and characterized in castor bean. Nuclear Factor-Y (NF-Y) transcription factors in plants contain three subunits (NF-YA, NF-YB and NF-YC), and function as a heterodimer or heterotrimer complex in regulating plant growth, development and response to stresses. Castor bean (Ricinus communis, Euphorbiaceae) one of the most economically important non-edible oilseed crops, able to grow in diverse soil conditions and displays high tolerance to abiotic stresses. Due to increasing demands for its seed oils, it is necessary to elucidate the molecular mechanism underlying the regulation of growth and development. Based on the available genome data, we identified 25 RcNF-Y members including six RcNF-YAs, 12 RcNF-YBs and seven RcNF-YCs, and characterized their gene structures. Yeast two-hybrid assays confirmed the protein-protein interactions among three subunits. Using transcriptomic data from different tissues, we found that six members were highly or specifically expressed in endosperms (in particular, two LEC1-type members RcNF-YB2 and RcNF-YB12), implying their involvement in regulating seed development and storage reservoir accumulation. Further, we investigated the expression changes of RcNF-Y members in two-week-old seedlings under drought, cold, hot and salt stresses. We found that the expression levels of 20 RcNF-Y members tested were changed and three RcNF-Y members might function in response to abiotic stresses. This study is the first reported on genomic characterization of NF-Y transcription factors in the family Euphorbiaceae. Our results provide the basis for improved understanding of how NF-Y genes function in the regulation of seed development and responses to abiotic stresses in both castor bean and other plants in this family.

Does Gender-Specific Differential Item Functioning Affect the Structure in Vocational Interest Inventories?

Science.gov (United States)

Beinicke, Andrea; Pässler, Katja; Hell, Benedikt

2014-01-01

The study investigates consequences of eliminating items showing gender-specific differential item functioning (DIF) on the psychometric structure of a standard RIASEC interest inventory. Holland's hexagonal model was tested for structural invariance using a confirmatory methodological approach (confirmatory factor analysis and randomization…

e sup + e sup - Factories: PEP-II, KEKB, DAPHINE

CERN Document Server

Guiducci, S

2001-01-01

In 1999 two B-factories, PEP-II and KEK, and a PHI-factory, DAPHINE, started their physics experiments. A status report of the three factories is presented. A description of the interaction regions, strongly influenced by the detector requirements, and of the machine background in the detectors is presented.

Implementing Clinical Research Using Factorial Designs: A Primer.

Science.gov (United States)

Baker, Timothy B; Smith, Stevens S; Bolt, Daniel M; Loh, Wei-Yin; Mermelstein, Robin; Fiore, Michael C; Piper, Megan E; Collins, Linda M

2017-07-01

Factorial experiments have rarely been used in the development or evaluation of clinical interventions. However, factorial designs offer advantages over randomized controlled trial designs, the latter being much more frequently used in such research. Factorial designs are highly efficient (permitting evaluation of multiple intervention components with good statistical power) and present the opportunity to detect interactions amongst intervention components. Such advantages have led methodologists to advocate for the greater use of factorial designs in research on clinical interventions (Collins, Dziak, & Li, 2009). However, researchers considering the use of such designs in clinical research face a series of choices that have consequential implications for the interpretability and value of the experimental results. These choices include: whether to use a factorial design, selection of the number and type of factors to include, how to address the compatibility of the different factors included, whether and how to avoid confounds between the type and number of interventions a participant receives, and how to interpret interactions. The use of factorial designs in clinical intervention research poses choices that differ from those typically considered in randomized clinical trial designs. However, the great information yield of the former encourages clinical researchers' increased and careful execution of such designs. Copyright © 2017. Published by Elsevier Ltd.

Family context assessment in a public health study.

Science.gov (United States)

Velasco, David; Sánchez de Miguel, Manuel; Egurza, Maitane; Arranz, Enrique; Aranbarri, Aritz; Fano, Eduardo; Ibarluzea, Jesús

2014-01-01

To analyze the factorial structure of a new instrument to assess the quality of the family context (Etxadi-Gangoiti Scale) in a sample from the Gipuzkoa cohort of the Environment and Childhood (Infancia y Medio Ambiente [INMA]) study. Families in a sample of 433 two-year-old children were assessed in a home visit with subsequent analysis of the factorial structure and psychometric properties of the data. An exploratory factorial analysis (principal axis factoring and varimax rotation) and a confirmatory factorial analysis were carried out; partial confirmation of the original factorial structure of the instrument was obtained, which revealed the following factorial structures. Subscale (1): promotion of cognitive and linguistic development, social skills, psychomotor skills, and pretend play and imitation; subscale (2): promotion of independence and self-esteem, provision of optimal frustration, social and emotional quality of the relationship, and absence of physical punishment; subscale (3): paternal involvement, low exposure to family conflict, low frequency of family conflict, relationship with the extended family, social support, diversity of experiences, low frequency of stressful events, and low parental perception of stress. The structure of the original instrument structure was partially confirmed, which was attributed to the characteristics of the sample. We stress the importance of the variability obtained in the evaluation of the families, as well as of adequate indicators of reliability in such evaluation. The new instrument could be used in public health to identify deficient family contexts and to design preventive interventions focused on parenting skills. Copyright © 2013 SESPAS. Published by Elsevier Espana. All rights reserved.

Repeat confirmatory testing for persons with discordant whole blood and oral fluid rapid HIV test results: findings from post marketing surveillance.

Science.gov (United States)

Wesolowski, Laura G; Mackellar, Duncan A; Ethridge, Steven F; Zhu, Julia H; Owen, S Michele; Sullivan, Patrick S

2008-02-06

Reactive oral fluid and whole blood rapid HIV tests must be followed with a confirmatory test (Western blot (WB), immunofluorescent assay (IFA) or approved nucleic acid amplification test (NAAT)). When the confirmatory result is negative or indeterminate (i.e. discordant with rapid result), repeat confirmatory testing should be conducted using a follow-up specimen. Previous reports have not described whether repeat testing adequately resolves the HIV-infection status of persons with discordant results. Post-marketing surveillance was conducted in 368 testing sites affiliated with 14 state and 2 city health departments from August 11, 2004 to June 30, 2005 and one health department through December 31, 2005. For persons with discordant results, data were collected on demographics, risk behaviors, HIV test results and specimen types. Persons with repeat confirmatory results were classified as HIV-infected or uninfected. Regression models were created to assess risk factors for not having repeat testing. Of 167,371 rapid tests conducted, 2589 (1.6%) were reactive: of these, 2417 (93%) had positive WB/IFA, 172 (7%) had negative or indeterminate WB/IFA. Of 89/172 (52%) persons with a repeat confirmatory test: 17 (19%) were HIV-infected, including 3 with indeterminate WB and positive NAAT; 72 (81%) were uninfected, including 12 with repeat indeterminate WB. Factors associated with HIV-infection included having an initial indeterminate WB/IFA (vs. negative) (ptest [adjusted OR 2.6, 95% CI (1.3, 4.9)]. Though only half of persons with discordant results had repeat confirmatory testing, of those who did, nearly one in five were HIV-infected. These findings underscore the need for rapid HIV testing programs to increase repeat confirmatory testing for persons with discordant results. Because of the lower sensitivity of oral fluid WBs, confirmatory testing following a reactive rapid test should be conducted using serum or plasma, when possible.

The physics of the B factories

CERN Document Server

Bevan, A J; Mannel, Th; Prell, S; Yabsley, B D; Abe, K; Aihara, H; Anulli, F; Arnaud, N; Aushev, T; Beneke, M; Beringer, J; Bianchi, F; Bigi, I I; Bona, M; Brambilla, N; Brodzicka, J; Chang, P; Charles, M J; Cheng, C H; Cheng, H -Y; Chistov, R; Colangelo, P; Coleman, J P; Drutskoy, A; Druzhinin, V P; Eidelman, S; Eigen, G; Eisner, A M; Faccini, R; Flood, K T; Gambino, P; Gaz, A; Gradl, W; Hayashii, H; Higuchi, T; Hulsbergen, W D; Hurth, T; Iijima, T; Itoh, R; Jackson, P D; Kass, R; Kolomensky, Yu G; Kou, E; Križan, P; Kronfeld, A; Kumano, S; Kwon, Y J; Latham, T E; Leith, D W G S; Lüth, V; Martinez-Vidal, F; Meadows, B T; Mussa, R; Nakao, M; Nishida, S; Ocariz, J; Olsen, S L; Pakhlov, P; Pakhlova, G; Palano, A; Pich, A; Playfer, S; Poluektov, A; Porter, F C; Robertson, S H; Roney, J M; Roodman, A; Sakai, Y; Schwanda, C; Schwartz, A J; Seidl, R; Sekula, S J; Steinhauser, M; Sumisawa, K; Swanson, E S; Tackmann, F; Trabelsi, K; Uehara, S; Uno, S; van der Water, R; Vasseur, G; Verkerke, W; Waldi, R; Wang, M Z; Wilson, F F; Zupan, J; Zupanc, A; Adachi, I; Albert, J; Banerjee, Sw; Ben-Haim, E; Biassoni, P; Cahn, R N; Cartaro, C; Chauveau, J; Chen, C; Chiang, C C; Cowan, R; Dalseno, J; Davier, M; Davies, C; Dingfelder, J C; Echenard, B; Epifanov, D; Fulsom, B G; Gabareen, A M; Gary, J W; Godang, R; Graham, M T; Hafner, A; Hamilton, B; Hartmann, T; Hayasaka, K; Hearty, C; Iwasaki, Y; Khodjamirian, A; Kusaka, A; Kuzmin, A; Lafferty, G D; Lazzaro, A; Li, J; Lindemann, D; Long, O; Lusiani, A; Marchiori, G; Martinelli, M; Miyabayashi, K; Mizuk, R; Mohanty, G B; Muller, D R; Nakazawa, H; Ongmongkolkul, P; Pacetti, S; Palombo, F; Pedlar, T K; Piilonen, L E; Pilloni, A; Poireau, V; Prothmann, K; Pulliam, T; Rama, M; Ratcliff, B N; Roudeau, P; Schrenk, S; Schroeder, T; Schubert, K R; Shen, C P; Shwartz, B; Soffer, A; Solodov, E P; Somov, A; Starič, M; Stracka, S; Telnov, A V; Todyshev, K Yu; Tsuboyama, T; Uglov, T; Vinokurova, A; Walsh, J J; Watanabe, Y; Won, E; Wormser, G; Wright, D H; Ye, S; Zhang, C C; Abachi, S; Abashian, A; Abe, N; Abe, R; Abe, T; Abrams, G S; Adam, I; Adamczyk, K; Adametz, A; Adye, T; Agarwal, A; Ahmed, H; Ahmed, M; Ahmed, S; Ahn, B S; Ahn, H S; Aitchison, I J R; Akai, K; Akar, S; Akatsu, M; Akemoto, M; Akhmetshin, R; Akre, R; Alam, M S; Albert, J N; Aleksan, R; Alexander, J P; Alimonti, G; Allen, M T; Allison, J; Allmendinger, T; Alsmiller, J R G; Altenburg, D; Alwyn, K E; An, Q; Anderson, J; Andreassen, R; Andreotti, D; Andreotti, M; Andress, J C; Angelini, C; Anipko, D; Anjomshoaa, A; Anthony, P L; Antillon, E A; Antonioli, E; Aoki, K; Arguin, J F; A, K; Arisaka, K; Asai, K; Asai, M; Asano, Y; Asgeirsson, D J; Asner, D M; Aso, T; Aspinwall, M L; Aston, D; Atmacan, H; Aubert, B; Aulchenko, V; Ayad, R; Azemoon, T; Aziz, T; Azzolini, V; Azzopardi, D E; Baak, M A; Back, J J; Bagnasco, S; Bahinipati, S; Bailey, D S; Bailey, S; Bailly, P; van Bakel, N; Bakich, A M; Bala, A; Balagura, V; Baldini-Ferroli, R; Ban, Y; Banas, E; Band, H R; Banerjee, S; Baracchini, E; Barate, R; Barberio, E; Barbero, M; Bard, D J; Barillari, T; Barlow, N R; Barlow, R J; Barrett, M; Bartel, W; Bartelt, J; Bartoldus, R; Batignani, G; Battaglia, M; Bauer, J M; Bay, A; Beaulieu, M; Bechtle, P; Beck, T W; Becker, J; Becla, J; Bedny, I; Behari, S; Behera, P K; Behn, E; Behr, L; Beigbeder, C; Beiline, D; Bell, R; Bellini, F; Bellis, M; Bellodi, G; Belous, K; Benayoun, M; Benelli, G; Benitez, J F; Benkebil, M; Berger, N; Bernabeu, J; Bernard, D; Bernet, R; Bernlochner, F U; Berryhill, J W; Bertsche, K; Besson, P; Best, D S; Bettarini, S; Bettoni, D; Bhardwaj, V; Bhimji, W; Bhuyan, B; Biagini, M E; Biasini, M; van Bibber, K; Biesiada, J; Bingham, I; Bionta, R M; Bischofberger, M; Bitenc, U; Bizjak, I; Blanc, F; Blaylock, G; Blinov, V E; Bloom, E; Bloom, P C; Blount, N L; Blouw, J; Bly, M; Blyth, S; Boeheim, C T; Bomben, M; Bondar, A; Bondioli, M; Bonneaud, G R; Bonvicini, G; Booke, M; Booth, J; Borean, C; Borgland, A W; Borsato, E; Bosi, F; Bosisio, L; Botov, A A; Bougher, J; Bouldin, K; Bourgeois, P; Boutigny, D; Bowerman, D A; Boyarski, A M; Boyce, R F; Boyd, J T; Bozek, A; Bozzi, C; Bračko, M; Brandenburg, G; Brandt, T; Brau, B; Brau, J; Breon, A B; Breton, D; Brew, C; Briand, H; Bright-Thomas, P G; Brigljević, V; Britton, D I; Brochard, F; Broomer, B; Brose, J; Browder, T E; Brown, C L; Brown, C M; Brown, D N; Browne, M; Bruinsma, M; Brunet, S; Bucci, F; Buchanan, C; Buchmueller, O L; Bünger, C; Bugg, W; Bukin, A D; Bula, R; Bulten, H; Burchat, P R; Burgess, W; Burke, J P; Button-Shafer, J; Buzykaev, A R; Buzzo, A; Cai, Y; Calabrese, R; Calcaterra, A; Calderini, G; Camanzi, B; Campagna, E; Campagnari, C; Capra, R; Carassiti, V; Carpinelli, M; Carroll, M; Casarosa, G; Casey, B C K; Cason, N M; Castelli, G; Cavallo, N; Cavoto, G; Cecchi, A; Cenci, R; Cerizza, G; Cervelli, A; Ceseracciu, A; Chai, X; Chaisanguanthum, K S; Chang, M C; Chang, Y H; Chang, Y W; Chao, D S; Chao, M; Chao, Y; Charles, E; Chavez, C A; Cheaib, R; Chekelian, V; Chen, A; Chen, E; Chen, G P; Chen, H F; Chen, J -H; Chen, J C; Chen, K F; Chen, P; Chen, S; Chen, W T; Chen, X; Chen, X R; Chen, Y Q; Cheng, B; Cheon, B G; Chevalier, N; Chia, Y M; Chidzik, S; Chilikin, K; Chistiakova, M V; Cizeron, R; Cho, I S; Cho, K; Chobanova, V; Choi, H H F; Choi, K S; Choi, S K; Choi, Y; Choi, Y K; Christ, S; Chu, P H; Chun, S; Chuvikov, A; Cibinetto, G; Cinabro, D; Clark, A R; Clark, P J; Clarke, C K; Claus, R; Claxton, B; Clifton, Z C; Cochran, J; Cohen-Tanugi, J; Cohn, H; Colberg, T; Cole, S; Colecchia, F; Condurache, C; Contri, R; Convert, P; Convery, M R; Cooke, P; Copty, N; Cormack, C M; Corso, F Dal; Corwin, L A; Cossutti, F; Cote, D; Ramusino, A Cotta; Cottingham, W N; Couderc, F; Coupal, D P; Covarelli, R; Cowan, G; Craddock, W W; Crane, G; Crawley, H B; Cremaldi, L; Crescente, A; Cristinziani, M; Crnkovic, J; Crosetti, G; Cuhadar-Donszelmann, T; Cunha, A; Curry, S; D'Orazio, A; Dû, S; Dahlinger, G; Dahmes, B; Dallapiccola, C; Danielson, N; Danilov, M; Das, A; Dash, M; Dasu, S; Datta, M; Daudo, F; Dauncey, P D; David, P; Davis, C L; Day, C T; De Mori, F; De Domenico, G; De Groot, N; De la Vaissière, C; de la Vaissière, Ch; de Lesquen, A; De Nardo, G; de Sangro, R; De Silva, A; DeBarger, S; Decker, F J; Sanchez, P del Amo; Del Buono, L; Del Gamba, V; del Re, D; Della Ricca, G; Denig, A G; Derkach, D; Derrington, I M; DeStaebler, H; Destree, J; Devmal, S; Dey, B; Di Girolamo, B; Di Marco, E; Dickopp, M; Dima, M O; Dittrich, S; Dittongo, S; Dixon, P; Dneprovsky, L; Dohou, F; Doi, Y; Doležal, Z; Doll, D A; Donald, M; Dong, L; Dong, L Y; Dorfan, J; Dorigo, A; Dorsten, M P; Dowd, R; Dowdell, J; Drásal, Z; Dragic, J; Drummond, B W; Dubitzky, R S; Dubois-Felsmann, G P; Dubrovin, M S; Duh, Y C; Duh, Y T; Dujmic, D; Dungel, W; Dunwoodie, W; Dutta, D; Dvoretskii, A; Dyce, N; Ebert, M; Eckhart, E A; Ecklund, S; Eckmann, R; Eckstein, P; Edgar, C L; Edwards, A J; Egede, U; Eichenbaum, A M; Elmer, P; Emery, S; Enari, Y; Enomoto, R; Erdos, E; Erickson, R; Ernst, J A; Erwin, R J; Escalier, M; Eschenburg, V; Eschrich, I; Esen, S; Esteve, L; Evangelisti, F; Everton, C W; Eyges, V; Fabby, C; Fabozzi, F; Fahey, S; Falbo, M; Fan, S; Fang, F; Fanin, C; Farbin, A; Farhat, H; Fast, J E; Feindt, M; Fella, A; Feltresi, E; Ferber, T; Fernholz, R E; Ferrag, S; Ferrarotto, F; Ferroni, F; Field, R C; Filippi, A; Finocchiaro, G; Fioravanti, E; da Costa, J Firmino; Fischer, P -A; Fisher, A; Fisher, P H; Flacco, C J; Flack, R L; Flaecher, H U; Flanagan, J; Flanigan, J M; Ford, K E; Ford, W T; Forster, I J; Forti, A C; Forti, F; Fortin, D; Foster, B; Foulkes, S D; Fouque, G; Fox, J; Franchini, P; Sevilla, M Franco; Franek, B; Frank, E D; Fransham, K B; Fratina, S; Fratini, K; Frey, A; Frey, R; Friedl, M; Fritsch, M; Fry, J R; Fujii, H; Fujikawa, M; Fujita, Y; Fujiyama, Y; Fukunaga, C; Fukushima, M; Fullwood, J; Funahashi, Y; Funakoshi, Y; Furano, F; Furman, M; Furukawa, K; Futterschneider, H; Gabathuler, E; Gabriel, T A; Gabyshev, N; Gaede, F; Gagliardi, N; Gaidot, A; Gaillard, J -M; Gaillard, J R; Galagedera, S; Galeazzi, F; Gallo, F; Gamba, D; Gamet, R; Gan, K K; Gandini, P; Ganguly, S; Ganzhur, S F; Gao, Y Y; Gaponenko, I; Garmash, A; Tico, J Garra; Garzia, I; Gaspero, M; Gastaldi, F; Gatto, C; Gaur, V; Geddes, N I; Geld, T L; Genat, J -F; George, K A; George, M; George, S; Georgette, Z; Gershon, T J; Gill, M S; Gillard, R; Gilman, J D; Giordano, F; Giorgi, M A; Giraud, P -F; Gladney, L; Glanzman, T; Glattauer, R; Go, A; Goetzen, K; Goh, Y M; Gokhroo, G; Goldenzweig, P; Golubev, V B; Gopal, G P; Gordon, A; Gorišek, A; Goriletsky, V I; Gorodeisky, R; Gosset, L; Gotow, K; Gowdy, S J; Graffin, P; Grancagnolo, S; Grauges, E; Graziani, G; Green, M G; Greene, M G; Grenier, G J; Grenier, P; Griessinger, K; Grillo, A A; Grinyov, B V; Gritsan, A V; Grosdidier, G; Perdekamp, M Grosse; Grosso, P; Grothe, M; Groysman, Y; Grünberg, O; Guido, E; Guler, H; Gunawardane, N J W; Guo, Q H; Guo, R S; Guo, Z J; Guttman, N; Ha, H; Ha, H C; Haas, T; Haba, J; Hachtel, J; Hadavand, H K; Hadig, T; Hagner, C; Haire, M; Haitani, F; Haji, T; Haller, G; Halyo, V; Hamano, K; Hamasaki, H; de Monchenault, G Hamel; Hamilton, J; Hamilton, R; Hamon, O; Han, B Y; Han, Y L; Hanada, H; Hanagaki, K; Handa, F; Hanson, J E; Hanushevsky, A; Hara, K; Hara, T; Harada, Y; Harrison, P F; Harrison, T J; Harrop, B; Hart, A J; Hart, P A; Hartfiel, B L; Harton, J L; Haruyama, T; Hasan, A; Hasegawa, Y; Hast, C; Hastings, N C; Hasuko, K; Hauke, A; Hawkes, C M; Hayashi, K; Hazumi, M; Hee, C; Heenan, E M; Heffernan, D; Held, T; Henderson, R; Henderson, S W; Hertzbach, S S; Hervé, S; Heß, M; Heusch, C A; Hicheur, A; Higashi, Y; Higasino, Y; Higuchi, I; Hikita, S; Hill, E J; Himel, T; Hinz, L; Hirai, T; Hirano, H; Hirschauer, J F; Hitlin, D G; Hitomi, N; Hodgkinson, M C; Höcker, A; Hoi, C T; Hojo, T; Hokuue, T; Hollar, J J; Hong, T M; Honscheid, K; Hooberman, B; Hopkins, D A; Horii, Y; Hoshi, Y; Hoshina, K; Hou, S; Hou, W S; Hryn'ova, T; Hsiung, Y B; Hsu, C L; Hsu, S C; Hu, H; Hu, T; Huang, H C; Huang, T J; Huang, Y C; Huard, Z; Huffer, M E; Hufnagel, D; Hung, T; Hutchcroft, D E; Hyun, H J; Ichizawa, S; Igaki, T; Igarashi, A; Igarashi, S; Igarashi, Y; Igonkina, O; Ikado, K; Ikeda, H; Ikeda, K; Ilic, J; Inami, K; Innes, W R; Inoue, Y; Ishikawa, A; Ishino, H; Itagaki, K; Itami, S; Itoh, K; Ivanchenko, V N; Iverson, R; Iwabuchi, M; Iwai, G; Iwai, M; Iwaida, S; Iwamoto, M; Iwasaki, H; Iwasaki, M; Iwashita, T; Izen, J M; Jackson, D J; Jackson, F; Jackson, G; Jackson, P S; Jacobsen, R G; Jacoby, C; Jaegle, I; Jain, V; Jalocha, P; Jang, H K; Jasper, H; Jawahery, A; Jayatilleke, S; Jen, C M; Jensen, F; Jessop, C P; Ji, X B; John, M J J; Johnson, D R; Johnson, J R; Jolly, S; Jones, M; Joo, K K; Joshi, N; Joshi, N J; Judd, D; Julius, T; Kadel, R W; Kadyk, J A; Kagan, H; Kagan, R; Kah, D H; Kaiser, S; Kaji, H; Kajiwara, S; Kakuno, H; Kameshima, T; Kaminski, J; Kamitani, T; Kaneko, J; Kang, J H; Kang, J S; Kani, T; Kapusta, P; Karbach, T M; Karolak, M; Karyotakis, Y; Kasami, K; Katano, G; Kataoka, S U; Katayama, N; Kato, E; Kato, Y; Kawai, H; Kawai, M; Kawamura, N; Kawasaki, T; Kay, J; Kay, M; Kelly, M P; Kelsey, M H; Kent, N; Kerth, L T; Khan, A; Khan, H R; Kharakh, D; Kibayashi, A; Kichimi, H; Kiesling, C; Kikuchi, M; Kikutani, E; Kim, B H; Kim, C H; Kim, D W; Kim, H; Kim, H J; Kim, H O; Kim, H W; Kim, J B; Kim, J H; Kim, K T; Kim, M J; Kim, P; Kim, S K; Kim, S M; Kim, T H; Kim, Y I; Kim, Y J; King, G J; Kinoshita, K; Kirk, A; Kirkby, D; Kitayama, I; Klemetti, M; Klose, V; Klucar, J; Knecht, N S; Knoepfel, K J; Knowles, D J; Ko, B R; Kobayashi, N; Kobayashi, S; Kobayashi, T; Kobel, M J; Koblitz, S; Koch, H; Kocian, M L; Kodyš, P; Koeneke, K; Kofler, R; Koike, S; Koishi, S; Koiso, H; Kolb, J A; Kolya, S D; Kondo, Y; Konishi, H; Koppenburg, P; Koptchev, V B; Kordich, T M B; Korol, A A; Korotushenko, K; Korpar, S; Kouzes, R T; Kovalskyi, D; Kowalewski, R; Kozakai, Y; Kozanecki, W; Kral, J F; Krasnykh, A; Krause, R; Kravchenko, E A; Krebs, J; Kreisel, A; Kreps, M; Krishnamurthy, M; Kroeger, R; Kroeger, W; Krokovny, P; Kronenbitter, B; Kroseberg, J; Kubo, T; Kuhr, T; Kukartsev, G; Kulasiri, R; Kulikov, A; Kumar, R; Kumar, S; Kumita, T; Kuniya, T; Kunze, M; Kuo, C C; Kuo, T -L; Kurashiro, H; Kurihara, E; Kurita, N; Kuroki, Y; Kurup, A; Kutter, P E; Kuznetsova, N; Kvasnička, P; Kyberd, P; Kyeong, S H; Lacker, H M; Lae, C K; Lamanna, E; Lamsa, J; Lanceri, L; Landi, L; Lang, M I; Lange, D J; Lange, J S; Langenegger, U; Langer, M; Lankford, A J; Lanni, F; Laplace, S; Latour, E; Lau, Y P; Lavin, D R; Layter, J; Lebbolo, H; LeClerc, C; Leddig, T; Leder, G; Diberder, F Le; Lee, C L; Lee, J; Lee, J S; Lee, M C; Lee, M H; Lee, M J; Lee, S -J; Lee, S E; Lee, S H; Lee, Y J; Lees, J P; Legendre, M; Leitgab, M; Leitner, R; Leonardi, E; Leonidopoulos, C; Lepeltier, V; Leruste, Ph; Lesiak, T; Levi, M E; Levy, S L; Lewandowski, B; Lewczuk, M J; Lewis, P; Li, H; Li, H B; Li, S; Li, X; Li, Y; Gioi, L Li; Libby, J; Lidbury, J; Lillard, V; Lim, C L; Limosani, A; Lin, C S; Lin, J Y; Lin, S W; Lin, Y S; Lindquist, B; Lindsay, C; Lista, L; Liu, C; Liu, F; Liu, H; Liu, H M; Liu, J; Liu, R; Liu, T; Liu, Y; Liu, Z Q; Liventsev, D; Vetere, M Lo; Locke, C B; Lockman, W S; Di Lodovico, F; Lombardo, V; London, G W; Pegna, D Lopes; Lopez, L; Lopez-March, N; Lory, J; LoSecco, J M; Lou, X C; Louvot, R; Lu, A; Lu, C; Lu, M; Lu, R S; Lueck, T; Luitz, S; Lukin, P; Lund, P; Luppi, E; Lutz, A M; Lutz, O; Lynch, G; Lynch, H L; Lyon, A J; Lyubinsky, V R; MacFarlane, D B; Mackay, C; MacNaughton, J; Macri, M M; Madani, S; Mader, W F; Majewski, S A; Majumder, G; Makida, Y; Malaescu, B; Malaguti, R; Malclès, J; Mallik, U; Maly, E; Mamada, H; Manabe, A; Mancinelli, G; Mandelkern, M; Mandl, F; Manfredi, P F; Mangeol, D J J; Manoni, E; Mao, Z P; Margoni, M; Marker, C E; Markey, G; Marks, J; Marlow, D; Marques, V; Marsiske, H; Martellotti, S; Martin, E C; Martin, J P; Martin, L; Martinez, A J; Marzolla, M; Mass, A; Masuzawa, M; Mathieu, A; Matricon, P; Matsubara, T; Matsuda, T; Matsumoto, H; Matsumoto, S; Matsumoto, T; Matsuo, H; Mattison, T S; Matvienko, D; Matyja, A; Mayer, B; Mazur, M A; Mazzoni, M A; McCulloch, M; McDonald, J; McFall, J D; McGrath, P; McKemey, A K; McKenna, J A; Mclachlin, S E; McMahon, S; McMahon, T R; McOnie, S; Medvedeva, T; Melen, R; Mellado, B; Menges, W; Menke, S; Merchant, A M; Merkel, J; Messner, R; Metcalfe, S; Metzler, S; Meyer, N T; Meyer, T I; Meyer, W T; Michael, A K; Michelon, G; Michizono, S; Micout, P; Miftakov, V; Mihalyi, A; Mikami, Y; Milanes, D A; Milek, M; Mimashi, T; Minamora, J S; Mindas, C; Minutoli, S; Mir, L M; Mishra, K; Mitaroff, W; Miyake, H; Miyashita, T S; Miyata, H; Miyazaki, Y; Moffitt, L C; Mohapatra, A; Mohapatra, A K; Mohapatra, D; Moll, A; Moloney, G R; Mols, J P; Mommsen, R K; Monge, M R; Monorchio, D; Moore, T B; Moorhead, G F; de Freitas, P Mora; Morandin, M; Morgan, N; Morgan, S E; Morganti, M; Morganti, S; Mori, S; Mori, T; Morii, M; Morris, J P; Morsani, F; Morton, G W; Moss, L J; Mouly, J P; Mount, R; Mueller, J; Müller-Pfefferkorn, R; Mugge, M; Muheim, F; Muir, A; Mullin, E; Munerato, M; Murakami, A; Murakami, T; Muramatsu, N; Musico, P; Nagai, I; Nagamine, T; Nagasaka, Y; Nagashima, Y; Nagayama, S; Nagel, M; Naisbit, M T; Nakadaira, T; Nakahama, Y; Nakajima, M; Nakajima, T; Nakamura, I; Nakamura, T; Nakamura, T T; Nakano, E; Nakayama, H; Nam, J W; Narita, S; Narsky, I; Nash, J A; Natkaniec, Z; Nauenberg, U; Nayak, M; Neal, H; Nedelkovska, E; Negrini, M; Neichi, K; Nelson, D; Nelson, S; Neri, N; Nesom, G; Neubauer, S; Newman-Coburn, D; Ng, C; Nguyen, X; Nicholson, H; Niebuhr, C; Nief, J Y; Niiyama, M; Nikolich, M B; Nisar, N K; Nishimura, K; Nishio, Y; Nitoh, O; Nogowski, R; Noguchi, S; Nomura, T; Nordby, M; Nosochkov, Y; Novokhatski, A; Nozaki, S; Nozaki, T; Nugent, I M; O'Grady, C P; O'Neale, S W; O'Neill, F G; Oberhof, B; Oddone, P J; Ofte, I; Ogawa, A; Ogawa, K; Ogawa, S; Ogawa, Y; Ohkubo, R; Ohmi, K; Ohnishi, Y; Ohno, F; Ohshima, T; Ohshima, Y; Ohuchi, N; Oide, K; Oishi, N; Okabe, T; Okazaki, N; Okazaki, T; Okuno, S; Olaiya, E O; Olivas, A; Olley, P; Olsen, J; Ono, S; Onorato, G; Onuchin, A P; Onuki, Y; Ooba, T; Orimoto, T J; Oshima, T; Osipenkov, I L; Ostrowicz, W; Oswald, C; Otto, S; Oyang, J; Oyanguren, A; Ozaki, H; Ozcan, V E; Paar, H P; Padoan, C; Paick, K; Palka, H; Pan, B; Pan, Y; Vazquez, W Panduro; Panetta, J; Panova, A I; Panvini, R S; Panzenböck, E; Paoloni, E; Paolucci, P; Pappagallo, M; Paramesvaran, S; Park, C S; Park, C W; Park, H; Park, H K; Park, K S; Park, W; Parry, R J; Parslow, N; Passaggio, S; Pastore, F C; Patel, P M; Patrignani, C; Patteri, P; Pavel, T; Pavlovich, J; Payne, D J; Peak, L S; Peimer, D R; Pelizaeus, M; Pellegrini, R; Pelliccioni, M; Peng, C C; Peng, J C; Peng, K C; Peng, T; Penichot, Y; Pennazzi, S; Pennington, M R; Penny, R C; Penzkofer, A; Perazzo, A; Perez, A; Perl, M; Pernicka, M; Perroud, J -P; Peruzzi, I M; Pestotnik, R; Peters, K; Peters, M; Petersen, B A; Petersen, T C; Petigura, E; Petrak, S; Petrella, A; Petrič, M; Petzold, A; Pia, M G; Piatenko, T; Piccolo, D; Piccolo, M; Piemontese, L; Piemontese, M; Pierini, M; Pierson, S; Pioppi, M; Piredda, G; Pivk, M; Plaszczynski, S; Polci, F; Pompili, A; Poropat, P; Posocco, M; Potter, C T; Potter, R J L; Prasad, V; Prebys, E; Prencipe, E; Prendki, J; Prepost, R; Prest, M; Prim, M; Pripstein, M; Prudent, X; Pruvot, S; Puccio, E M T; Purohit, M V; Qi, N D; Quinn, H; Raaf, J; Rabberman, R; Raffaelli, F; Ragghianti, G; Rahatlou, S; Rahimi, A M; Rahmat, R; Rakitin, A Y; Randle-Conde, A; Rankin, P; Rashevskaya, I; Ratkovsky, S; Raven, G; Re, V; Reep, M; Regensburger, J J; Reidy, J; Reif, R; Reisert, B; Renard, C; Renga, F; Ricciardi, S; Richman, J D; Ritchie, J L; Ritter, M; Rivetta, C; Rizzo, G; Roat, C; Robbe, P; Roberts, D A; Robertson, A I; Robutti, E; Rodier, S; Rodriguez, D M; Rodriguez, J L; Rodriguez, R; Roe, N A; Röhrken, M; Roethel, W; Rolquin, J; Romanov, L; Romosan, A; Ronan, M T; Rong, G; Ronga, F J; Roos, L; Root, N; Rosen, M; Rosenberg, E I; Rossi, A; Rostomyan, A; Rotondo, M; Roussot, E; Roy, J; Rozanska, M; Rozen, Y; Rubin, A E; Ruddick, W O; Ruland, A M; Rybicki, K; Ryd, A; Ryu, S; Ryuko, J; Sabik, S; Sacco, R; Saeed, M A; Tehrani, F Safai; Sagawa, H; Sahoo, H; Sahu, S; Saigo, M; Saito, T; Saitoh, S; Sakai, K; Sakamoto, H; Sakaue, H; Saleem, M; Salnikov, A A; Salvati, E; Salvatore, F; Samuel, A; Sanders, D A; Sanders, P; Sandilya, S; Sandrelli, F; Sands, W; Sands, W R; Sanpei, M; Santel, D; Santelj, L; Santoro, V; Santroni, A; Sanuki, T; Sarangi, T R; Saremi, S; Sarti, A; Sasaki, T; Sasao, N; Satapathy, M; Sato, Nobuhiko; Sato, Noriaki; Sato, Y; Satoyama, N; Satpathy, A; Savinov, V; Savvas, N; Saxton, O H; Sayeed, K; Schaffner, S F; Schalk, T; Schenk, S; Schieck, J R; Schietinger, T; Schilling, C J; Schindler, R H; Schmid, S; Schmitz, R E; Schmuecker, H; Schneider, O; Schnell, G; Schönmeier, P; Schofield, K C; Schott, G; Schröder, H; Schram, M; Schubert, J; Schümann, J; Schultz, J; Schumm, B A; Schune, M H; Schwanke, U; Schwarz, H; Schwiening, J; Schwierz, R; Schwitters, R F; Sciacca, C; Sciolla, G; Scott, I J; Seeman, J; Seiden, A; Seitz, R; Seki, T; Sekiya, A I; Semenov, S; Semmler, D; Sen, S; Senyo, K; Seon, O; Serbo, V V; Serednyakov, S I; Serfass, B; Serra, M; Serrano, J; Settai, Y; Seuster, R; Sevior, M E; Shakhova, K V; Shang, L; Shapkin, M; Sharma, V; Shebalin, V; Shelkov, V G; Shen, B C; Shen, D Z; Shen, Y T; Sherwood, D J; Shibata, T; Shibata, T A; Shibuya, H; Shidara, T; Shimada, K; Shimoyama, M; Shinomiya, S; Shiu, J G; Shorthouse, H W; Shpilinskaya, L I; Sibidanov, A; Sicard, E; Sidorov, A; Sidorov, V; Siegle, V; Sigamani, M; Simani, M C; Simard, M; Simi, G; Simon, F; Simonetto, F; Sinev, N B; Singh, H; Singh, J B; Sinha, R; Sitt, S; Skovpen, Yu I; Sloane, R J; Smerkol, P; Smith, A J S; Smith, D; Smith, D S; Smith, J G; Smol, A; Snoek, H L; Snyder, A; So, R Y; Sobie, R J; Soderstrom, E; Soha, A; Sohn, Y S; Sokoloff, M D; Sokolov, A; Solagna, P; Solovieva, E; Soni, N; Sonnek, P; Sordini, V; Spaan, B; Spanier, S M; Spencer, E; Speziali, V; Spitznagel, M; Spradlin, P; Staengle, H; Stamen, R; Stanek, M; Stanič, S; Stark, J; Steder, M; Steininger, H; Steinke, M; Stelzer, J; Stevanato, E; Stocchi, A; Stock, R; Stoeck, H; Stoker, D P; Stroili, R; Strom, D; Strother, P; Strube, J; Stugu, B; Stypula, J; Su, D; Suda, R; Sugahara, R; Sugi, A; Sugimura, T; Sugiyama, A; Suitoh, S; Sullivan, M K; Sumihama, M; Sumiyoshi, T; Summers, D J; Sun, L; Sun, S; Sundermann, J E; Sung, H F; Susaki, Y; Sutcliffe, P; Suzuki, A; Suzuki, J; Suzuki, J I; Suzuki, K; Suzuki, S; Suzuki, S Y; Swain, J E; Swain, S K; T'Jampens, S; Tabata, M; Tackmann, K; Tajima, H; Tajima, O; Takahashi, K; Takahashi, S; Takahashi, T; Takasaki, F; Takayama, T; Takita, M; Tamai, K; Tamponi, U; Tamura, N; Tan, N; Tan, P; Tanabe, K; Tanabe, T; Tanaka, H A; Tanaka, J; Tanaka, M; Tanaka, S; Tanaka, Y; Tanida, K; Taniguchi, N; Taras, P; Tasneem, N; Tatishvili, G; Tatomi, T; Tawada, M; Taylor, F; Taylor, G N; Taylor, G P; Telnov, V I; Teodorescu, L; Ter-Antonyan, R; Teramoto, Y; Teytelman, D; Thérin, G; Thiebaux, Ch; Thiessen, D; Thomas, E W; Thompson, J M; Thorne, F; Tian, X C; Tibbetts, M; Tikhomirov, I; Tinslay, J S; Tiozzo, G; Tisserand, V; Tocut, V; Toki, W H; Tomassini, E W; Tomoto, M; Tomura, T; Torassa, E; Torrence, E; Tosi, S; Touramanis, C; Toussaint, J C; Tovey, S N; Trapani, P P; Treadwell, E; Triggiani, G; Trincaz-Duvoid, S; Trischuk, W; Troost, D; Trunov, A; Tsai, K L; Tsai, Y T; Tsujita, Y; Tsukada, K; Tsukamoto, T; Tuggle, J M; Tumanov, A; Tung, Y W; Turnbull, L; Turner, J; Turri, M; Uchida, K; Uchida, M; Uchida, Y; Ueki, M; Ueno, K; Ujiie, N; Ulmer, K A; Unno, Y; Urquijo, P; Ushiroda, Y; Usov, Y; Usseglio, M; Usuki, Y; Uwer, U; Va'vra, J; Vahsen, S E; Vaitsas, G; Valassi, A; Vallazza, E; Vallereau, A; Vanhoefer, P; van Hoek, W C; Van Hulse, C; van Winkle, D; Varner, G; Varnes, E W; Varvell, K E; Vasileiadis, G; Velikzhanin, Y S; Verderi, M; Versillé, S; Vervink, K; Viaud, B; Vidal, P B; Villa, S; Villanueva-Perez, P; Vinograd, E L; Vitale, L; Vitug, G M; Voß, C; Voci, C; Voena, C; Volk, A; von Wimmersperg-Toeller, J H; Vorobyev, V; Vossen, A; Vuagnin, G; Vuosalo, C O; Wacker, K; Wagner, A P; Wagner, D L; Wagner, G; Wagner, M N; Wagner, S R; Wagoner, D E; Walker, D; Walkowiak, W; Wallom, D; Wang, C C; Wang, C H; Wang, J; Wang, J G; Wang, K; Wang, L; Wang, L L; Wang, P; Wang, T J; Wang, W F; Wang, X L; Wang, Y F; Wappler, F R; Watanabe, M; Watson, A T; Watson, J E; Watson, N K; Watt, M; Weatherall, J H; Weaver, M; Weber, T; Wedd, R; Wei, J T; Weidemann, A W; W, A J R; Wenzel, W A; West, C A; West, C G; West, T J; White, R M; Wicht, J; Widhalm, L; Wiechczynski, J; Wienands, U; Wilden, L; Wilder, M; Williams, D C; Williams, G; Williams, J C; Williams, K M; Williams, M I; Willocq, S Y; Wilson, J R; Wilson, M G; Wilson, R J; Winklmeier, F; Winter, M A; Wisniewski, W J; Wittgen, M; Wittlin, J; Wittmer, W; Wixted, R; Woch, A; Wogsland, B J; Wong, Q K; Wray, B C; Wren, A C; Wright, D M; Wu, C H; Wu, J; Wu, S L; Wulsin, H W; Xella, S M; Xie, Q L; Xie, Y; Xu, Z Z; Yèche, Ch; Yamada, Y; Yamaga, M; Yamaguchi, A; Yamaguchi, H; Yamaki, T; Yamamoto, H; Yamamoto, N; Yamamoto, R K; Yamamoto, S; Yamanaka, T; Yamaoka, H; Yamaoka, J; Yamaoka, Y; Yamashita, Y; Yamauchi, M; Yan, D S; Yan, Y; Yanai, H; Yanaka, S; Yang, H; Yang, R; Yang, S; Yarritu, A K; Yashchenko, S; Yashima, J; Yasin, Z; Yasu, Y; Ye, S W; Yeh, P; Yi, J I; Yi, K; Yi, M; Yin, Z W; Ying, J; Yocky, G; Yokoyama, K; Yokoyama, M; Yokoyama, T; Yoshida, K; Yoshida, M; Yoshimura, Y; Young, C C; Yu, C X; Yu, Z; Yuan, C Z; Yuan, Y; Yumiceva, F X; Yusa, Y; Yushkov, A N; Yuta, H; Zacek, V; Zain, S B; Zallo, A; Zambito, S; Zander, D; Zang, S L; Zanin, D; Zaslavsky, B G; Zeng, Q L; Zghiche, A; Zhang, B; Zhang, J; Zhang, L; Zhang, L M; Zhang, S Q; Zhang, Z P; Zhao, H W; Zhao, M; Zhao, Z G; Zheng, Y; Zheng, Y H; Zheng, Z P; Zhilich, V; Zhou, P; Zhu, R Y; Zhu, Y S; Zhu, Z M; Zhulanov, V; Ziegler, T; Ziegler, V; Zioulas, G; Zisman, M; Zito, M; Zürcher, D; Zwahlen, N; Zyukova, O; Živko, T; Žontar, D; Bevan, Adrian; Golob, Bostjan; Mannel, Thomas; Prell, Soeren; Yabsley, Bruce

2014-01-01

This work is on the Physics of the B Factories. Part A of this book contains a brief description of the SLAC and KEK B Factories as well as their detectors, BaBar and Belle, and data taking related issues. Part B discusses tools and methods used by the experiments in order to obtain results. The results themselves can be found in Part C.

CT findings as confirmatory criteria of brain death

International Nuclear Information System (INIS)

Shiogai, Toshiyuki; Takeuchi, Kazuo

1983-01-01

The absence of cerebral circulation and electrocerebral silence have served as an accurate index of irreversible brain death. It is proposed that computed tomography (CT) findings be evaluated as confirmatory criteria of brain death. To this end, CT evaluation of 14 patients satisfying the conventional criteria of brain death was performed. A CT finding of severe compression or dissappearance of the ventricular system, or so called ''brain tamponade'', was seen in 7 (50 %) of the 14 patients. Enhanced contrast CT, especially dynamic CT, usually distinctly reveals the cerebral vessels whenever the cerebral blood flow is preserved; conversely, the lack of enhanced brain structures, even comparing attenuation values, indicates the absence of cerebral blood flow. In 7 (70 %) of 10 patients, however, there was enhanced contrast of vascular brain structures, especially the circle of Willis, major cerebral arteries, choroid plexuses, and venous sinuses. It is suggested that this result is due to the improvement of demonstrability by CT. The usefulness of CT in the confirmation of brain death lies in visualization of the pathological changes associated with a dead brain, such as ''brain tamponade'', and the lack of enhanced contrast indicating the absence of cerebral blood flow. The latter point is still problematic as angiography revealed an extremely low cerebral blood flow in a few cases of ''dead brain'' patients. It is recommended that cerebral blood flow in brain death be evaluated by dynamic CT scanning and correlated with other methods of cerebral blood flow determination (e.g., intravenous digital subtraction angiography). (Author)

CT findings as confirmatory criteria of brain death

Energy Technology Data Exchange (ETDEWEB)

Shiogai, Toshiyuki; Takeuchi, Kazuo (Kyorin Univ., Mitaka, Tokyo (Japan). School of Medicine)

1983-12-01

The absence of cerebral circulation and electrocerebral silence have served as an accurate index of irreversible brain death. It is proposed that computed tomography (CT) findings be evaluated as confirmatory criteria of brain death. To this end, CT evaluation of 14 patients satisfying the conventional criteria of brain death was performed. A CT finding of severe compression or dissappearance of the ventricular system, or so called ''brain tamponade'', was seen in 7 (50 %) of the 14 patients. Enhanced contrast CT, especially dynamic CT, usually distinctly reveals the cerebral vessels whenever the cerebral blood flow is preserved; conversely, the lack of enhanced brain structures, even comparing attenuation values, indicates the absence of cerebral blood flow. In 7 (70 %) of 10 patients, however, there was enhanced contrast of vascular brain structures, especially the circle of Willis, major cerebral arteries, choroid plexuses, and venous sinuses. It is suggested that this result is due to the improvement of demonstrability by CT. The usefulness of CT in the confirmation of brain death lies in visualization of the pathological changes associated with a dead brain, such as ''brain tamponade'', and the lack of enhanced contrast indicating the absence of cerebral blood flow. The latter point is still problematic as angiography revealed an extremely low cerebral blood flow in a few cases of ''dead brain'' patients. It is recommended that cerebral blood flow in brain death be evaluated by dynamic CT scanning and correlated with other methods of cerebral blood flow determination (e.g., intravenous digital subtraction angiography).

Confirmatory Factor Analysis of the Delirium Rating Scale Revised-98 (DRS-R98).

Science.gov (United States)

Thurber, Steven; Kishi, Yasuhiro; Trzepacz, Paula T; Franco, Jose G; Meagher, David J; Lee, Yanghyun; Kim, Jeong-Lan; Furlanetto, Leticia M; Negreiros, Daniel; Huang, Ming-Chyi; Chen, Chun-Hsin; Kean, Jacob; Leonard, Maeve

2015-01-01

Principal components analysis applied to the Delirium Rating Scale-Revised-98 contributes to understanding the delirium construct. Using a multisite pooled international delirium database, the authors applied confirmatory factor analysis to Delirium Rating Scale-Revised-98 scores from 859 adult patients evaluated by delirium experts (delirium, N=516; nondelirium, N=343). Confirmatory factor analysis found all diagnostic features and core symptoms (cognitive, language, thought process, sleep-wake cycle, motor retardation), except motor agitation, loaded onto factor 1. Motor agitation loaded onto factor 2 with noncore symptoms (delusions, affective lability, and perceptual disturbances). Factor 1 loading supports delirium as a single construct, but when accompanied by psychosis, motor agitation's role may not be solely as a circadian activity indicator.

Pen Branch fault: Confirmatory drilling results

International Nuclear Information System (INIS)

Stieve, A.; Coruh, C.; Costain, J.K.

1994-01-01

The Confirmatory Drilling Project is the final investigation under the Pen Branch Fault Program initiated to determine the capability of the Pen Branch fault (PBF) to release seismic energy. This investigation focused on a small zone over the fault where previously collected seismic reflection data had indicated the fault deforms the subsurface at 150 msec (with reference to an 80 m reference datum). Eighteen drill holes, 2 to basement and the others to 300 ft, were arranged in a scatter pattern over the fault. To adequately define configuration of the layers deformed by the fault boreholes were spaced over a zone of 800 ft, north to south. The closely spaced data were to confirm or refute the existence of flat lying reflectors observed in seismic reflection data and to enable the authors to identify and correlate lithologic layers with seismic reflection data. Results suggest that deformation by the fault in sediments 300 ft deep ad shallower is subtle. Corroboration of the geologic interpretation with the seismic reflection profile is ongoing but preliminary results indicate that specific reflectors can be assigned to lithologic layers. A large amplitude package of reflections below a flat lying continuous reflection at 40 msec can be correlated with a lithology that corresponds to carbonate sediments in geologic cross-section. Further, data also show that a geologic layer as shallow as 30 ft can be traced on these seismic data over the same subsurface distance where geologic cross-section shows corresponding continuity. The subsurface structure is thus corroborated by both methods at this study site

B-factory detectors

International Nuclear Information System (INIS)

Marlow, D.R.

2002-01-01

The designs of the recently commissioned BaBar and Belle B-Factory detectors are described. The discussion is organized around the methods and instruments used to detect the so-called gold-plated-mode B 0 →J/ΨK S decays and related modes

A distribution-free multi-factorial profiler for harvesting information from high-density screenings.

Science.gov (United States)

Besseris, George J

2013-01-01

Data screening is an indispensable phase in initiating the scientific discovery process. Fractional factorial designs offer quick and economical options for engineering highly-dense structured datasets. Maximum information content is harvested when a selected fractional factorial scheme is driven to saturation while data gathering is suppressed to no replication. A novel multi-factorial profiler is presented that allows screening of saturated-unreplicated designs by decomposing the examined response to its constituent contributions. Partial effects are sliced off systematically from the investigated response to form individual contrasts using simple robust measures. By isolating each time the disturbance attributed solely to a single controlling factor, the Wilcoxon-Mann-Whitney rank stochastics are employed to assign significance. We demonstrate that the proposed profiler possesses its own self-checking mechanism for detecting a potential influence due to fluctuations attributed to the remaining unexplainable error. Main benefits of the method are: 1) easy to grasp, 2) well-explained test-power properties, 3) distribution-free, 4) sparsity-free, 5) calibration-free, 6) simulation-free, 7) easy to implement, and 8) expanded usability to any type and size of multi-factorial screening designs. The method is elucidated with a benchmarked profiling effort for a water filtration process.

A distribution-free multi-factorial profiler for harvesting information from high-density screenings.

Directory of Open Access Journals (Sweden)

George J Besseris

Full Text Available Data screening is an indispensable phase in initiating the scientific discovery process. Fractional factorial designs offer quick and economical options for engineering highly-dense structured datasets. Maximum information content is harvested when a selected fractional factorial scheme is driven to saturation while data gathering is suppressed to no replication. A novel multi-factorial profiler is presented that allows screening of saturated-unreplicated designs by decomposing the examined response to its constituent contributions. Partial effects are sliced off systematically from the investigated response to form individual contrasts using simple robust measures. By isolating each time the disturbance attributed solely to a single controlling factor, the Wilcoxon-Mann-Whitney rank stochastics are employed to assign significance. We demonstrate that the proposed profiler possesses its own self-checking mechanism for detecting a potential influence due to fluctuations attributed to the remaining unexplainable error. Main benefits of the method are: 1 easy to grasp, 2 well-explained test-power properties, 3 distribution-free, 4 sparsity-free, 5 calibration-free, 6 simulation-free, 7 easy to implement, and 8 expanded usability to any type and size of multi-factorial screening designs. The method is elucidated with a benchmarked profiling effort for a water filtration process.

INDOOR THERMAL CONDITION OF FACTORY BUILDING IN BANGLADESH

OpenAIRE

Muhammed Abdullah Al Sayem Khan; Mohd. Hamdan Ahmad; Tareef Hayat Khan

2011-01-01

Bangladesh is a developing country and has a lot of factories for different products for local use and also export to abroad. Garments industries are one of the top most items of exported items. A huge number of populations are working in garments industries. But these factories are not well designed in sense of the thermal environment. Workers experiences sickness related to indoor environment. The productions of these factories are affected due to employees’ health condition. The research i...

Confirmatory analysis method for zeranol, its metabolites and related mycotoxins in urine by liquid chromatography-negative ion electrospray tandem mass spectrometry

International Nuclear Information System (INIS)

Bennekom, E.O. van; Brouwer, L.; Laurant, E.H.M.; Hooijerink, H.; Nielen, M.W.F.

2002-01-01

The determination of the banned anabolic substance zeranol and the metabolites taleranol and zearalanone in bovine urine is complicated by the occurrence of the structurally-related mycotoxin zearalenone and the corresponding α- and β-zearalenol metabolites which possess similar estrogenic properties. A liquid chromatography-negative ion electrospray tandem mass spectrometric method is presented for the confirmatory analysis of all six resorcylic acid lactones ('zeranols') in urine samples using deuterium-labelled internal standards. The method was validated as a confirmatory method for bovine urine samples according to new draft EU guidelines and showed good precision and linearity, and CCα and CCβ values of 0.02-0.30 and -1 , respectively. The applicability was demonstrated by comparing the results of an incurred sample with previous results on the same sample obtained by gas chromatography high resolution mass spectrometry. Preliminary data show that following a simple matrix solid phase dispersion clean-up, liver samples from poultry will be amenable to this method as well

TRIUMF kaon factory plans

International Nuclear Information System (INIS)

Blackmore, E.W.

1983-01-01

A progress report on the TRIUMF Kaon Factory Feasibility Study is presented. The requirements placed on the machine parameters and experimental facilities by the potentially interesting experiments are discussed

TRIUMF kaon factory plans

International Nuclear Information System (INIS)

Blackmore, E.W.

1982-11-01

A progress report on the TRIUMF Kaon Factory Feasibility Study is presented. The requirements placed on the machine parameters and experimental facilities by the potentially interesting experiments are discussed

Development Instruments Through Confirmatory Factor Analysis (CFA in Appropriate Intensity Assessment

Directory of Open Access Journals (Sweden)

Ari Saptono

2017-06-01

Full Text Available The research aims to develop the valid and reliable measurement instruments of entrepreneurship intention in vocational secondary school students. Multi stage random sampling was used as the technique to determine sample (300 respondents. The research method used research and development with confirmatory factor analysis (CFA. Result of confirmatory factor analysis (CFA at the second order with robust maximum likelihood method shows that valid and reliable instrument with the acquisition value of loading factor is more than 0.5 (> 0,5 and a significance value of t is more than 1,96 (> 1,96. Reliability test results shows that the value of the combined construct reliability (CR of 0.97and a variance value extract (VE to 0.52 is greater than the limit of acceptance CR ≥ 0.70 and VE ≥ 0.50. The conclusion of the measurement instruments of entrepreneurship intention with three dimensions and 31 items met the standards of validity and reliability in accordance with the instrument development process.

An Interactive Simulation Tool for Production Planning in Bacon Factories

DEFF Research Database (Denmark)

Nielsen, Jens Frederik Dalsgaard; Nielsen, Kirsten Mølgaard

1994-01-01

The paper describes an interactive simulation tool for production planning in bacon factories. The main aim of the tool is to make it possible to combine the production plans of all parts of the factory......The paper describes an interactive simulation tool for production planning in bacon factories. The main aim of the tool is to make it possible to combine the production plans of all parts of the factory...

DEVELOPMENT OF LAW RELATING TO FACTORIES IN INDIA

Directory of Open Access Journals (Sweden)

M. K. Sahu

2015-01-01

Full Text Available The rapid growth of industrial town and factories has paved the way to develop our industrial legislation accordingly. The Government of India never expressed their interest in framing separate legislation vis-à-vis factories which resulted in implementation of the same statute which was enacted pre-independence. It was done by virtue of Art. 372 of the Constitution of India. However, the Constitutional Lawmakers created vacuum for the implementation of new statute in accordance with the demand of society by inserting scope under the Directive Principles of State Policies. However, in the 67 years history of Indian Republic, there are unprecedented developments of law relating to factories in India.The Government of India, with the adoption of existed statute, made an effort to incorporate the welfare legislation but it never developed along with the change in time. It is to be noticed that as far as existing statutes are concerned, the development is an effect of judicial pronouncement or some tragic incident like Bhopal Gas Tragedy. This paper succinctly describes the history of factory legislation, the constitutional validity of the previous statute and necessary amendment which have already been done and / or on the verge of being amended. It will further discuss contribution of judiciary in developing the law relating to factories, scope of industrial jurisprudence in promoting the development of factory legislation. The primary focus of the research project is to reflect upon the areas where factory legislation has developed, so that proper yardstick could be made in order to put emphasis on those areas which have been remained untouched.

The Cannabis Abuse Screening Test and the DSM-5 in the general population: Optimal thresholds and underlying common structure using multiple factor analysis.

Science.gov (United States)

Legleye, Stéphane

2017-11-10

The Cannabis Abuse Screening Test (CAST) aims at screening the problematic use of cannabis. It has never been validated against the Diagnostic and Statistical Manual of Mental Disorders (DSM)-5 and its relationships with this latter have never been studied. We used a probabilistic telephone survey collected in 2014 (1351 past-year cannabis users aged 15-64) implementing the CAST and a DSM-5 adaptation of the Munich Composite International Diagnostic Interview assessing cannabis use disorders. Data were weighted, and CAST items were considered categorical. Factorial structures were assessed with confirmatory factor analyses; the relationships between the instruments were studied with multiple factor analysis (MFA). One factor for the DSM-5 and two correlated factors for the CAST were the best confirmatory factor analyses solutions. The CAST thresholds for screening moderate/severe and severe cannabis use disorders were 5 (sensitivity = 78.2% and specificity = 79.6%) and 8 (sensitivity = 86.0% and specificity = 86.7%), respectively. The MFA identified two orthogonal dimensions: The first was equally shared by both instruments; the second was the second CAST dimension (extreme frequencies of use before midday and alone, memory problems, and reproaches from friends/family). The CAST structure and screening properties were confirmed. The MFA explains its screening performances by its first dimension and identified the problematic patterns (the second dimension) that are not captured by the DSM-5. Copyright © 2017 John Wiley & Sons, Ltd.

Photon Factory activity report, 1989

International Nuclear Information System (INIS)

1990-01-01

At the Photon Factory about 500 experiments are now running annually with about 50 experimental stations, the total operation time of the 2.5 GeV storage ring was 3400 hour in 1989, and the number of users was more than 2000, including 300 scientists from industry. This wide usage of synchrotron radiation has been supported by good performance of the accelerators. The positron beam current of the linac was increased for rapid injection (injection time: 20 min). The entire roof of the Light Source building was covered with thermal insulator (urethane-foam). This has greatly improved the beam stability of the ring. It has been operated at an initial ring current of 350 mA with a life time of 20 hours. Distinctive instrumentation at the Photon Factory has expanded to various fields such as angle-resolved ion-spectroscopy, dispersive EXAFS, trace impurity X-ray fluorescence analysis, plane-wave topography, structure analysis under high pressure, and imaging plates. Recently, experiments of protein structure analysis have been carried out extensively; Sakabe developed a new type of Weissenberg camera for protein crystallography, and about 50 experiments have been done for the past six months by a combination of Sakabe camera and imaging plates. The 2.5 GeV light source is now at an entrance of its harvest season. The TRISTAN Accumulation Ring has been used throughout this year in a time sharing basis with the TRISTAN experiment; twenty minutes for injection to TRISTAN Main Ring and 2 hours for SR experiment. The main subject has been magnetic Compton scattering with circularly polarized wiggler radiation. Such experiences enable us to expand our perspective for research in the following decade; we are investigating the possibility of operating the TRISTAN Main Ring at 6-8 GeV with 6000-pole undulaters, resulting in an extremely brilliant radiation source (Emittance: 0.1 nm·rad at 5 GeV with damping rings). (J.P.N.)

On KEK B-Factory

Science.gov (United States)

Sugawara, H.

2009-07-01

There are two principles which the management of a research institute like KEK must respect when dealing with such big project as B-Factory. One is the scientific merit of the project and the other is the organizational consideration which includes financial, human, technical and historical elements. Ideally, the two principles are to be fully taken into account. But, in many cases, one or the other is only partially fulfilled due to unavoidable circumstances. The lack of flexibility to respond to all possible situations is more dangerous and may lead to a disaster as in the case of SSC. I will describe the process which lead to the successful construction, operation and physics presentations of KEK B-Factory following faithfully the official records.

On KEK B-factory

International Nuclear Information System (INIS)

Sugawara, Hirotaka

2009-01-01

There are two principles which the management of a research institute like KEK must respect when dealing with such big project as B-Factory. One is the scientific merit of the project and the other is the organizational consideration which includes financial, human, technical and historical elements. Ideally, the two principles are to be fully taken into account. But, in many cases, one or the other is only partially fulfilled due to unavoidable circumstances. The lack of flexibility to respond to all possible situations is more dangerous and may lead to a disaster as in the case of SSC. I will describe the process which lead to the successful construction, operation and physics presentations of KEK B-Factory following faithfully the official records. (author)

Factory automation for heavy electric equipment

International Nuclear Information System (INIS)

Rokutani, Takashi; Ninomiya, Iwao; Hatayama, Naokatsu; Kato, Hiroshi; Yano, Hideaki.

1986-01-01

The heightening of productivity in the factories manufacturing heavy electric equipment has been advanced so far by the rationalization of direct workings such as NC, robots and the adoption of FMS (flexible manufacturing system). However, as CAD advances, the effective utilization of these data and the expansion to future CIM (computer integrated manufacture) have become to be demanded. In the Hitachi Works of Hitachi Ltd., it was decided to advance the synthetic rationalization by adopting FA (factory automation) system. Steam turbine blades, pipings for nuclear power plants and motor coils were taken up as the objects since these are important parts, and for the purpose of the drastic heightening of QA level, the heightening of accuracy and the shortening of processes, the synchronization with field installation schedule and the creation of safe working place environment, the FA projects for these three sections were simultaneously planned. When the automation of non-mass production factories is promoted, there are the unmanned factories combining FMS lines for relatively many products and those characterized by FMC of shortening preparation time for small lot products, and this is the examples of the former. The system constitution for FA and the production management combined with it are described. The high reliability of the optical network was regarded as important. (Kako, I.)

Personality Inventory for DSM-5-Short Form (PID-5-SF): Reliability, Factorial Structure, and Relationship With Functional Impairment in Dual Diagnosis Patients.

Science.gov (United States)

Díaz-Batanero, Carmen; Ramírez-López, Juan; Domínguez-Salas, Sara; Fernández-Calderón, Fermín; Lozano, Óscar M

2017-11-01

Section III of the Diagnostic and Statistical Manual of Mental Disorders-Fifth edition ( DSM-5) has generated a personality paradigm consisting of 25 personality facets identified in five domains. The developed assessment instrument Personality Inventory for DSM-5 (PID-5) has showed good psychometric properties, but the potential for certain improvements still remain. In this article, a sample of 282 dual diagnosis patients is used to provide evidence of the psychometric properties of the PID-5-Short Form. The mean value of Cronbach's alpha coefficients reached .73 on the facets and .84 for domains and test-retest values ranged between .57 to .83 for facets and .70 to .87 for the domains. Confirmatory factor analyses conducted showed good fit on both models tested: the five correlated factor structure and hierarchical structure of personality traits. The WHODAS 2.0 domains of understanding and communicating, and participating in society, appear to show the strongest relationship with personality facets. In general, the PID-5-Short Form shows adequate psychometric properties for use in dual diagnosis patients.

KUSTANNUS JA KANNATTAVUUSLASKENNAN KEHITTÄMINEN CASE KOTEK FACTORY SERVICE OY

OpenAIRE

Ilmonen, Hanna

2009-01-01

Opinnäytetyön toimeksiantajana oli Kotek Factory Service Oy ja kohteena oli Kotek Factory Service Oy:n maalaamo. Kotek Factory Service on Chesterton ARC- pinnoitteiden maahantuoja ja myyjä, joka vastaa tuotteidensa erilaisista urakoinneista, täydellisinä palvelukokonaisuuksina. Opinnäytetyön tavoitteena oli saada aikaiseksi toimintaehdotus siitä, kuinka Kotek Factory Service Oy voisi kehittää kustannus ja kannattavuuslaskentaansa maalaamon ja koko yrityksen osalta. Ongelmaan haettiin ratk...

Ergonomic analysis jobs in recovered factories.

Science.gov (United States)

Cuenca, Gabriela; Zotta, Gastón

2012-01-01

With the advent of the deep economic crisis in Argentina on 2001, the recovery of companies through to the creation of the Cooperatives Working Self-Management or Factories Recovered by its workers was constituted as one of the ways in which the salaried disobeyed the increasing unemployment. When the companies turn into recovered factories they tend to leave of side practices that have been seen like imposed by the previous organization and not understanding them as a primary condition for the execution of his tasks. Safety and ergonomics are two disciplines that are no longer considered relevant to the daily work. Therefore this investigation aims to revalue, undergo semantic to give back to a place in every organization analyzed. This research developed a self-diagnostic tool for working conditions, and the environment, present in the recovered factories.

Review of U.S. Neutrino Factory Studies

International Nuclear Information System (INIS)

Zisman, Michael S.

2005-01-01

We summarize the status of the two U.S. feasibility studies carried out by the Neutrino Factory and Muon Collider Collaboration (NFMCC) along with recent improvements to Neutrino Factory design developed during the American Physical Society (APS) Neutrino Physics Study. Suggested accelerator topics for the International Scoping Study (ISS) are also indicated

Mainz/PSI φ-factory design considerations

International Nuclear Information System (INIS)

Streun, A.

1991-01-01

Design considerations for a φ-factory with a Luminosity of the order of 10 33 cm -2 s -1 lead to the concept of a multi-bunch round beam double storage ring with superconducting solenoids for micro-beta focusing and beam rotation. Simulations of the beam-beam-interaction indicate, that significantly higher beam-beam-parameters may become possible with round beams. A rough draft design of a round beam φ-factory is presented. (orig.)

Factorial structure of the locomotor disability scale in a sample of adults with mobility impairments in Bangladesh.

Science.gov (United States)

Mahmud, Ilias; Clarke, Lynda; Nahar, Nazmun; Ploubidis, George B

2018-05-02

Disability does not only depend on individuals' health conditions but also the contextual factors in which individuals live. Therefore, disability measurement scales need to be developed or adapted to the context. Bangladesh lacks any locally developed or validated scales to measure disabilities in adults with mobility impairment. We developed a new Locomotor Disability Scale (LDS) in a previous qualitative study. The present study developed a shorter version of the scale and explored its factorial structure. We administered the LDS to 316 adults with mobility impairments, selected from outpatient and community-based settings of a rehabilitation centre in Bangladesh. We did exploratory factor analysis (EFA) to determine a shorter version of the LDS and explore its factorial structure. We retained 19 items from the original LDS following evaluation of response rate, floor/ceiling effects, inter-item correlations, and factor loadings in EFA. The Eigenvalues greater than one rule and the Scree test suggested a two-factor model of measuring locomotor disability (LD) in adults with mobility impairment. These two factors are 'mobility activity limitations' and 'functional activity limitations'. We named the higher order factor as 'locomotor disability'. This two-factor model explained over 68% of the total variance among the LD indicators. The reproduced correlation matrix indicated a good model fit with 14% non-redundant residuals with absolute values > 0.05. However, the Chi-square test indicated poor model fit (p Kaiser-Meyer-Olkin Measure (KMO) of sampling adequacy was .94 and the individual diagonal elements in the anti-correlation matrix were > .91. Among the retained 19 items, there was no correlation coefficient > .9 or a large number of correlation coefficients .3) cross loadings and the correlation between the two factors was .657. The 'mobility activity limitations' and 'functional activity limitations' sub-scales demonstrated excellent internal

The Oswestry Disability Index, confirmatory factor analysis in a sample of 35,263 verifies a one-factor structure but practicality issues remain.

Science.gov (United States)

Gabel, Charles Philip; Cuesta-Vargas, Antonio; Qian, Meihua; Vengust, Rok; Berlemann, Ulrich; Aghayev, Emin; Melloh, Markus

2017-08-01

To analyze the factor structure of the Oswestry Disability Index (ODI) in a large symptomatic low back pain (LBP) population using exploratory (EFA) and confirmatory factor analysis (CFA). Analysis of pooled baseline ODI LBP patient data from the international Spine Tango registry of EUROSPINE, the Spine Society of Europe. The sample, with n = 35,263 (55.2% female; age 15-99, median 59 years), included 76.1% of patients with a degenerative disease, and 23.9% of the patients with various other spinal conditions. The initial EFA provided a hypothetical construct for consideration. Subsequent CFA was considered in three scenarios: the full sample and separate genders. Models were compared empirically for best fit. The EFA indicated a one-factor solution accounting for 54% of the total variance. The CFA analysis based on the full sample confirmed this one-factor structure. Sub-group analyses by gender achieved good model fit for configural and partial metric invariance, but not scalar invariance. A possible two-construct model solution as outlined by previous researchers: dynamic-activities (personal care, lifting, walking, sex and social) and static-activities (pain, sleep, standing, travelling and sitting) was not preferred. The ODI demonstrated a one-factor structure in a large LBP sample. A potential two-factor model was considered, but not found appropriate for constructs of dynamic and static activity. The use of the single summary score for the ODI is psychometrically supported. However, practicality limitations were reported for use in the clinical and research settings. Researchers are encouraged to consider a shift towards newer, more sensitive and robustly developed instruments.

Extending the validity of the Feeding Practices and Structure Questionnaire.

Science.gov (United States)

Jansen, Elena; Mallan, Kimberley M; Daniels, Lynne A

2015-06-30

Feeding practices are commonly examined as potentially modifiable determinants of children's eating behaviours and weight status. Although a variety of questionnaires exist to assess different feeding aspects, many lack thorough reliability and validity testing. The Feeding Practices and Structure Questionnaire (FPSQ) is a tool designed to measure early feeding practices related to non-responsive feeding and structure of the meal environment. Face validity, factorial validity, internal reliability and cross-sectional correlations with children's eating behaviours have been established in mothers with 2-year-old children. The aim of the present study was to further extend the validity of the FPSQ by examining factorial, construct and predictive validity, and stability. Participants were from the NOURISH randomised controlled trial which evaluated an intervention with first-time mothers designed to promote protective feeding practices. Maternal feeding practices (FP) and child eating behaviours were assessed when children were aged 2 years and 3.7 years (n = 388). Confirmatory Factor analysis, group differences, predictive relationships, and stability were tested. The original 9-factor structure was confirmed when children were aged 3.7 ± 0.3 years. Cronbach's alpha was above the recommended 0.70 cut-off for all factors except Structured Meal Timing, Over Restriction and Distrust in Appetite which were 0.58, 0.67 and 0.66 respectively. Allocated group differences reflected behaviour consistent with intervention content and all feeding practices were stable across both time points (range of r = 0.45-0.70). There was some evidence for the predictive validity of factors with 2 FP showing expected relationships, 2 FP showing expected and unexpected relationships and 5 FP showing no relationship. Reliability and validity was demonstrated for most subscales of the FPSQ. Future validation is warranted with culturally diverse samples and with fathers and

49 CFR 192.931 - How may Confirmatory Direct Assessment (CDA) be used?

Science.gov (United States)

2010-10-01

...) PIPELINE AND HAZARDOUS MATERIALS SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION (CONTINUED) PIPELINE SAFETY TRANSPORTATION OF NATURAL AND OTHER GAS BY PIPELINE: MINIMUM FEDERAL SAFETY STANDARDS Gas Transmission Pipeline Integrity Management § 192.931 How may Confirmatory Direct Assessment (CDA) be used? An...

Factor structure and reliability of the childhood trauma questionnaire and prevalence estimates of trauma for male and female street youth.

Science.gov (United States)

Forde, David R; Baron, Stephen W; Scher, Christine D; Stein, Murray B

2012-01-01

This study examines the psychometric properties of the Childhood Trauma Questionnaire short form (CTQ-SF) with street youth who have run away or been expelled from their homes (N = 397). Internal reliability coefficients for the five clinical scales ranged from .65 to .95. Confirmatory Factor Analysis (CFA) was used to test the five-factor structure of the scales yielding acceptable fit for the total sample. Additional multigroup analyses were performed to consider items by gender. Results provided only evidence of weak factorial invariance. Constrained models showed invariance in configuration, factor loadings, and factor covariances but failed for equality of intercepts. Mean trauma scores for street youth tended to fall in the moderate to severe range on all abuse/neglect clinical scales. Females reported higher levels of abuse and neglect. Prevalence of child maltreatment of individual forms was very high with 98% of street youth reporting one or more forms; 27.4% of males and 48.9% of females reported all five forms. Results of this study support the viability of the CTQ-SF for screening maltreatment in a highly vulnerable street population. Caution is recommended when comparing prevalence estimates for male and female street youth given the failure of the strong factorial multigroup model.

Confirmatory Factor Analysis of the Malay Version Comprehensive Feeding Practices Questionnaire Tested among Mothers of Primary School Children in Malaysia

Directory of Open Access Journals (Sweden)

Shamarina Shohaimi

2014-01-01

Full Text Available Comprehensive feeding practices questionnaire (CFPQ is an instrument specifically developed to evaluate parental feeding practices. It has been confirmed among children in America and applied to populations in France, Norway, and New Zealand. In order to extend the application of CFPQ, we conducted a factor structure validation of the translated version of CFPQ (CFPQ-M using confirmatory factor analysis among mothers of primary school children (N = 397 in Malaysia. Several items were modified for cultural adaptation. Of 49 items, 39 items with loading factors >0.40 were retained in the final model. The confirmatory factor analysis revealed that the final model (twelve-factor model with 39 items and 2 error covariances displayed the best fit for our sample (Chi-square = 1147; df = 634; P<0.05; CFI = 0.900; RMSEA = 0.045; SRMR = 0.0058. The instrument with some modifications was confirmed among mothers of school children in Malaysia. The present study extends the usability of the CFPQ and enables researchers and parents to better understand the relationships between parental feeding practices and related problems such as childhood obesity.

Confirmatory factor analysis of the portuguese Depression Anxiety Stress Scales-21 Análisis factorial confirmatoria de la versión portuguesa de la Depression Anxiety Stress Scale-21 Análise fatorial confirmatória da versão portuguesa da Depression Anxiety Stress Scale-21

Directory of Open Access Journals (Sweden)

João Luís Alves Apóstolo

2012-06-01

Full Text Available To determine which of three published models best characterizes the factor structure of the Portuguese version of the Depression Anxiety Stress Scales-21 and to assess its validity and reliability. Confirmatory factor analysis of Depression Anxiety and Stress Scale-21 for 1,297 adult, primary care outpatients (66.7% female, Mage = 48.57 years comparing 3 models. The relationship between the Depression Anxiety Stress Scales-21 and the Positive and Negative Affect Schedule was analyzed. The correlated 3-factor model fit the data best. The scale demonstrated good internal consistency, with alpha scores of the subscales ranging from 0.836 to 0.897. Correlation with the Positive and Negative Affect Schedule was positive and moderate with the negative affect scale; it was negative and limited with the positive affect. These findings support the correlated 3-factor structure. The test demonstrated adequate reliability and construct validity, which supports its use for screening in primary care settings with Portuguese speakers.El objetivo de este estudio fue determinar cual de los tres modelos publicados mejor caracteriza la estructura factorial de la versión portuguesa de la Depression Anxiety Stress Scale-21 (DASS-21 y evaluar su validez y confiabilidad. Se compararon los tres modelos a través de análisis factorial confirmatoria de la DASS-21, aplicada el 1.297 pacientes adultos, del servicio de atención básica (66,7% mujeres; edad Media=48,57 años. La relación entre la DASS-21 y la Positive and Negative Affect Schedule (PANAS también fue analizada. El modelo de tres factores correlacionados se ajusta mejor a los datos. La escala presentó buena consistencia interna con valores alfa observados en las subescalas, variando de 0,836 a 0,897. La correlación con la PANAS fue positiva y comedida con la escala de afecto negativa, y negativa y limitada con la escala de afecto positivo. Esos resultados corroboran la estructura de tres factores. La

A holistic measurement model of movement competency in children.

Science.gov (United States)

Rudd, J; Butson, M L; Barnett, L; Farrow, D; Berry, J; Borkoles, E; Polman, R

2016-01-01

Different countries have different methods for assessing movement competence in children; however, it is unclear whether the test batteries that are used measure the same aspects of movement competence. The aim of this paper was to (1) investigate whether the Test of Gross Motor Development (TGMD-2) and Körperkoordinations Test für Kinder (KTK) measure the same aspects of children's movement competence and (2) examine the factorial structure of the TGMD-2 and KTK in a sample of Australian children. A total of 158 children participated (M age = 9.5; SD = 2.2). First, confirmatory factor analysis examined the independent factorial structure of the KTK and TGMD-2. Second, it was investigated whether locomotor, object control and body coordination loaded on the latent variable Movement Competency. Confirmatory factor analysis indicated an adequate fit for both the KTK and TGMD-2. An adequate fit was also achieved for the final model. In this model, locomotor (r = .86), object control (r = .71) and body coordination (r = .52) loaded on movement competence. Findings support our hypothesis that the TGMD-2 and KTK measure discrete aspects of movement competence. Future researchers and practitioners should consider using a wider range of test batteries to assess movement competence.

Confirmatory Survey Report for the Quehanna Decommissioning Project, Karthaus, PA

International Nuclear Information System (INIS)

W. C. Adams

2007-01-01

The survey activities consisted of visual inspections and radiological surveys including beta and gamma surface scans and surface beta activity measurements. The objectives of the confirmatory survey were to provide independent field data reviews and to generate independent radiological data for use by the NRC in evaluating the adequacy and accuracy of the licensee's procedures and FSS data. Additionally, this review provided assurance that the licensee adequately designed the FSS and fulfilled the commitments contained in the DP. ORISE has reviewed ESL's revised DP and revised FSSP for adequacy and appropriateness taking into account commitments contained in these documents that were approved by the NRC (ESL 2006a and b). These documents contain the release criteria for the site, along with the documentation on the derivation of the release criteria. The final survey data for the survey units (SU) to be evaluated were reviewed by ORISE prior to mobilization to the site and while at the site during confirmatory survey activities. ORISE reviewed and evaluated the radiological data, in accordance with the ORISE survey plan and other referenced documents, to ensure that FSS procedures and results adequately met site DP and FSSP commitments

Well-Being at Work Scale: Exploratory and Confirmatory Validation in the USA

Directory of Open Access Journals (Sweden)

Gisela Demo

2016-04-01

Full Text Available Abstract Given the lack of instruments to measure both affective and cognitive elements of well-being at work, the objective of this study is to look for evidence of validity in the US regarding the well-being at work scale, which was first validated in Brazil to measure employee well-being perceptions. Two studies using two different American samples of 809 participants in total were conducted for the exploratory and confirmatory validation of the scale. Construct validity was determined using convergent, discriminant, and nomological validity, which was assessed using a structural equation model to determine a correlation between well-being at work and human resources management practices. This research provides a comprehensive and operationally valid measure of well-being in work settings. The three-factor model can be used as a diagnostic tool for managers who wish to identify and improve the well-being of their work teams.

Confirmatory Factor Analysis of the WISC-III with Child Psychiatric Inpatients.

Science.gov (United States)

Tupa, David J.; Wright, Margaret O'Dougherty; Fristad, Mary A.

1997-01-01

Factor models of the Wechsler Intelligence Scale for Children-Third Edition (WISC-III) for one, two, three, and four factors were tested using confirmatory factor analysis with a sample of 177 child psychiatric inpatients. The four-factor model proposed in the WISC-III manual provided the best fit to the data. (SLD)

The Clone Factory

Science.gov (United States)

Stoddard, Beryl

2005-01-01

Have humans been cloned? Is it possible? Immediate interest is sparked when students are asked these questions. In response to their curiosity, the clone factory activity was developed to help them understand the process of cloning. In this activity, students reenact the cloning process, in a very simplified simulation. After completing the…

Photon Factory activity report, 1990

International Nuclear Information System (INIS)

1991-01-01

The Photon Factory has grown at a considerable rate, and 600 experiments are carried out in 1991, while the number of users is now 2300 including about 500 from industrial sectors. The use of synchrotron radiation increased from fundamental research to industrial development. The development at the Photon Factory is supported by the capability of the accelerators. At present, the 2.5 GeV PF ring is operated with positrons at the initial beam current of 350 mA. The total operation time was 3500 hours in the fiscal year 1990. The development of an avalanche mode photodiode, the observation of quantum beat in the experiment of nuclear Bragg scattering, the measurement of photo-electron and photo-ion spectroscopy were carried out. The conversion of TRISTAN main ring to an ultrahigh brilliance and high coherence source is planned for the future. The annual PF Symposium was held, and Professor H. Winick gave the lecture 'Ultrahigh brightness and coherent radiation from large storage rings'. In this report, the outline of the Photon Factory and the activities in Divisions of Injector Linac, Light Source and Instrumentation are described. (K.I.)

A multi-group confirmatory factor analyses of the LupusPRO between southern California and Filipino samples of patients with systemic lupus erythematosus.

Science.gov (United States)

Azizoddin, D R; Olmstead, R; Cost, C; Jolly, M; Ayeroff, J; Racaza, G; Sumner, L A; Ormseth, S; Weisman, M; Nicassio, P M

2017-08-01

Introduction Systemic lupus erythematosus (SLE) leads to a range of biopsychosocial health outcomes through an unpredictable and complex disease path. The LupusPRO is a comprehensive, self-report measure developed specifically for populations with SLE, which assesses both health-related quality of life and non-health related quality of life. Given its increasingly widespread use, additional research is needed to evaluate the psychometric integrity of the LupusPRO across diverse populations. The objectives of this study were to evaluate the performance of the LupusPRO in two divergent patient samples and the model fit between both samples. Methods Two diverse samples with SLE included 136 patients from an ethnically-diverse, urban region in southern California and 100 from an ethnically-homogenous, rural region in Manila, Philippines. All patients met the ACR classification criteria for SLE. Confirmatory factor analysis (CFAs) were conducted in each sample separately and combined to provide evidence of the factorial integrity of the 12 subscales in the LupusPRO. Results Demographic analyses indicated significant differences in age, disease activity and duration, education, income, insurance, and medication use between groups. Results of the separate CFAs indicated moderate fit to the data for the hypothesized 12-factor model for both the Manila and southern California groups, respectively [χ 2 (794) = 1283.32, p < 0.001, Comparative Fit Index (CFI) = 0.793; χ 2 (794) =1398.44, p < 0.001, CFI = 0.858]. When the factor structures of the LupusPRO in the southern California and Manila groups were constrained to be equal between the two groups, findings revealed that the factor structures of measured variables fit the two groups reasonably well [χ 2  (1697) = 2950.413, df = 1697, p < 0.000; CFI = 0.811]. After removing seven constraints and eight correlations suggested by the Lagrange multiplier test, the model fit improved

The Virtual Factory Teaching System (VFTS): Project Review and Results.

Science.gov (United States)

Kazlauskas, E. J.; Boyd, E. F., III; Dessouky, M. M.

This paper presents a review of the Virtual Factory Teaching (VFTS) project, a Web-based, multimedia collaborative learning network. The system allows students, working alone or in teams, to build factories, forecast demand for products, plan production, establish release rules for new work into the factory, and set scheduling rules for…

A conceptual design of circular Higgs factory

Energy Technology Data Exchange (ETDEWEB)

Cai, Yunhai

2016-11-30

Similar to a super B-factory, a circular Higgs factory (CHF) will require strong focusing systems near the interaction points and a low-emittance lattice in the arcs to achieve a factory luminosity. At electron beam energy of 125 GeV, beamstrahlung effects during the collision pose an additional challenge to the collider design. In particular, a large momentum acceptance at the 2% level is necessary to retain an adequate beam lifetime. This turns out to be the most challenging aspect in the design of a CHF. In this paper, an example will be provided to illustrate the beam dynamics in a CHF, emphasizing the chromatic optics. Basic optical modules and advanced analysis will be presented. Most importantly, we will show that 2% momentum aperture is achievable.

Four-legged factories

International Nuclear Information System (INIS)

Mackie, R.I.; Van der Walt, J.G.

1982-01-01

Insight into how ruminants utilise plant material, converting what is essentially waste into food, wool and draught power for Man is being sought by Animal Scientists using isotopic tracer techniques. Answers to cost-effectice biological conversion lie in the complex interactions of the rumen's microbial fermentation factory and the host animal's diet and metabolism

Measurement of Air Pollution Comes from Adra Cement Factory

International Nuclear Information System (INIS)

Odat, M.; Meslmani, Y.; Al-Kharfan, K.; Shamali, K.

2013-06-01

Measurements of air pollution were carried out in and around Adra cement factory during a single period (December). The Measurements included the following: 1- Dust fall. 2- Total suspended particulates (TSP) and inhalable particulates PM-1-0 & PM-3 inside the factor and in residential area surrounded the factory (Worker City of Adra, Adra city, Wafeden Mokheam, Baironi Hospital and Alkatiefa City). 3-Determination the levels of Cd, Pb, Cu and zinc associated with air born. 4- Determination of toxic gases (CO, SO-2 and NO-x) emitted from the chimneys. The results showed that the quantity of dust fall was varied obviously inside the factory and the regions affected by air pollutions. The monthly concentration of dust fall were 165, 27 and 10 tons/Km 2 /month inside the factory , affected villages and Baironi Hospital respectively, Wherein the permissible limit is (9tons/Km'2/month). The total suspended particulates (TSP) and inhalable particulates PM-1-0 & PM-3 in the studies area were higher than the permissible limit. The TSP concentrations inside the factory ranged between 497 and 2021 microgram/m'3 while the ranged between 328 and 561 microgram /m'3 in the surrounded villages and between 232 and 244 microgram/m'3 near Damascus, the were far higher than the world health organization (WHO) standards (120 Microgram/m'3). The PM-3 which is the most effecting on the human health reached 117.6, 124.6 and 62.6 microgram /m 3 inside the factory (main in trance), city worker of Adra and Baironi Hospital respectively, theses concentrations were higher than the Syrian standards (15 microgram/m'3) The measurements which were carried out through an exclusive day refered that the percentage of TSP/PM-3 is increasedwith moving away from the factory and reached 6.8, 18.6, 19.3% in the main intrance of the factory, worker city of Adra and Bironi Hospital respectively. The level of toxic gases inside the source (chimneys) was within the standards

Racetrack lattices for the TRIUMF KAON factory

International Nuclear Information System (INIS)

Servranckx, R.V.; Craddock, M.K.

1989-05-01

Separated-function racetrack lattices have been developed for the KAON Factory accelerators that have more flexibility than the old circular lattices. The arcs of the large rings have a regular FODO structure with a superimposed six-fold symmetric modulation of the betafunction in order to raise γ t to infinity. In the small rings, γ t is kept high enough by choosing a sufficiently large phase advance in the arcs. Straight sections with zero dispersion are provided for rf cavities and fast injection and extraction, and with controlled dispersion for H - injection and slow extraction. The ion-optical properties of the lattices and the results from tracking studies are discussed

A CONFIRMATORY APPROACH TO MEASURING RISKS IN SUPPLY CHAINS

Directory of Open Access Journals (Sweden)

Constangioara Alexandru

2014-07-01

Our proposed research methodology reveals the advantages of a confirmatory factor analysis over an exploratory principal component analysis in the context of risks management in supply chains. Moreover, as Sodhi and Tang (2012 reveals, more than half of papers in existing SCRM literature are either conceptual or qualitative empirical (case studies. Our proposed quantitative methodology contributes to reducing the above mentioned gap, providing results that can be used for statistical inferences and for enhancing the efficiency of the managerial decisional process.

Lattices for the TRIUMF KAON factory

International Nuclear Information System (INIS)

Servranckx, R.V.; Craddock, M.K.

1989-09-01

Separated-function racetrack lattices have been developed for the KAON Factory accelerators that have more flexibility than the old circular lattices. The arcs of the large rings have a regular FODO structure with a superimposed six-fold symmetric modulation of the betafunction in order to raise γ t to infinity. Straight sections with zero dispersion are provided for rf cavities and fast injection and extraction, and with controlled dispersion for H - injection and slow extraction. For the small rings, sixfold symmetric circular lattices with high γ t are retained. In the Accumulator lattice, a straight section with double waist and controlled η function allows for H - injection and phase-space painting. The ion-optical properties of the lattices and the results from tracking studies are discussed

Dimensionality and measurement invariance in the Satisfaction with Life Scale in Norway.

Science.gov (United States)

Clench-Aas, Jocelyne; Nes, Ragnhild Bang; Dalgard, Odd Steffen; Aarø, Leif Edvard

2011-10-01

Results from previous studies examining the dimensionality and factorial invariance of the Satisfaction with Life Scale (SWLS) are inconsistent and often based on small samples. This study examines the factorial structure and factorial invariance of the SWLS in a Norwegian sample. Confirmatory factor analysis (AMOS) was conducted to explore dimensionality and test for measurement invariance in factor structure, factor loadings, intercepts, and residual variance across gender and four age groups in a large (N = 4,984), nationally representative sample of Norwegian men and women (15-79 years). The data supported a modified unidimensional structure. Factor loadings could be constrained to equality between the sexes, indicating metric invariance between genders. Further testing indicated invariance also at the strong and strict levels, thus allowing analyses involving group means. The SWLS was shown to be sensitive to age, however, at the strong and strict levels of invariance testing. In conclusion, the results in this Norwegian study seem to confirm that a unidimensional structure is acceptable, but that a modified single-factor model with correlations between error terms of items 4 and 5 is preferred. Additionally, comparisons may be made between the genders. Caution must be exerted when comparing age groups.

Repeat confirmatory testing for persons with discordant whole blood and oral fluid rapid HIV test results: findings from post marketing surveillance.

Directory of Open Access Journals (Sweden)

Laura G Wesolowski

Full Text Available BACKGROUND: Reactive oral fluid and whole blood rapid HIV tests must be followed with a confirmatory test (Western blot (WB, immunofluorescent assay (IFA or approved nucleic acid amplification test (NAAT. When the confirmatory result is negative or indeterminate (i.e. discordant with rapid result, repeat confirmatory testing should be conducted using a follow-up specimen. Previous reports have not described whether repeat testing adequately resolves the HIV-infection status of persons with discordant results. METHODOLOGY: Post-marketing surveillance was conducted in 368 testing sites affiliated with 14 state and 2 city health departments from August 11, 2004 to June 30, 2005 and one health department through December 31, 2005. For persons with discordant results, data were collected on demographics, risk behaviors, HIV test results and specimen types. Persons with repeat confirmatory results were classified as HIV-infected or uninfected. Regression models were created to assess risk factors for not having repeat testing. PRINCIPAL FINDINGS: Of 167,371 rapid tests conducted, 2589 (1.6% were reactive: of these, 2417 (93% had positive WB/IFA, 172 (7% had negative or indeterminate WB/IFA. Of 89/172 (52% persons with a repeat confirmatory test: 17 (19% were HIV-infected, including 3 with indeterminate WB and positive NAAT; 72 (81% were uninfected, including 12 with repeat indeterminate WB. Factors associated with HIV-infection included having an initial indeterminate WB/IFA (vs. negative (p<0.001 and having an initial oral fluid WB (vs. serum (p<0.001. Persons who had male-female sex (vs. male-male sex were at increased risk for not having a repeat test [adjusted OR 2.6, 95% CI (1.3, 4.9]. CONCLUSIONS: Though only half of persons with discordant results had repeat confirmatory testing, of those who did, nearly one in five were HIV-infected. These findings underscore the need for rapid HIV testing programs to increase repeat confirmatory testing for

Psychometric validation study of the liebowitz social anxiety scale - self-reported version for Brazilian Portuguese.

Directory of Open Access Journals (Sweden)

Larissa Forni dos Santos

Full Text Available Social Anxiety Disorder (SAD is prevalent and rarely diagnosed due to the difficulty in recognizing its symptoms as belonging to a disorder. Therefore, the evaluation/screening scales are of great importance for its detection, with the most used being the Liebowitz Social Anxiety Scale (LSAS. Thus, this study proposed to evaluate the psychometric properties of internal consistency and convergent validity, as well as the confirmatory factorial analysis and reliability of the self-reported version of the LSAS (LSAS-SR, translated into Brazilian Portuguese, in a sample of the general population (N = 413 and in a SAD clinical sample (N = 252. The convergent validity with specific scales for the evaluation of SAD and a general anxiety scale presented correlations ranging from 0.21 to 0.84. The confirmatory factorial analysis did not replicate the previously indicated findings of the literature, with the difficulty being in obtaining a consensus factorial structure common to the diverse cultures in which the instrument was studied. The LSAS-SR presented excellent internal consistency (α = 0.90-0.96 and test-retest reliability (Intraclass Correlation Coefficient = 0.81; Pearson's = 0.82. The present findings support those of international studies that attest to the excellent psychometric properties of the LSAS-SR, endorsing its status as the gold standard.

Psychometric Evaluation of the Student Authorship Questionnaire: A Confirmatory Factor Analysis Approach

Science.gov (United States)

Ballantine, Joan; Guo, Xin; Larres, Patricia

2015-01-01

This research provides new insights into the measurement of students' authorial identity and its potential for minimising the incidence of unintentional plagiarism by providing evidence about the psychometric properties of the Student Authorship Questionnaire (SAQ). Exploratory and confirmatory factor analyses (EFA and CFA) are employed to…

Validating the cross-cultural factor structure and invariance property of the Insomnia Severity Index: evidence based on ordinal EFA and CFA.

Science.gov (United States)

Chen, Po-Yi; Yang, Chien-Ming; Morin, Charles M

2015-05-01

The purpose of this study is to examine the factor structure of the Insomnia Severity Index (ISI) across samples recruited from different countries. We tried to identify the most appropriate factor model for the ISI and further examined the measurement invariance property of the ISI across samples from different countries. Our analyses included one data set collected from a Taiwanese sample and two data sets obtained from samples in Hong Kong and Canada. The data set collected in Taiwan was analyzed with ordinal exploratory factor analysis (EFA) to obtain the appropriate factor model for the ISI. After that, we conducted a series of confirmatory factor analyses (CFAs), which is a special case of the structural equation model (SEM) that concerns the parameters in the measurement model, to the statistics collected in Canada and Hong Kong. The purposes of these CFA were to cross-validate the result obtained from EFA and further examine the cross-cultural measurement invariance of the ISI. The three-factor model outperforms other models in terms of global fit indices in Taiwan's population. Its external validity is also supported by confirmatory factor analyses. Furthermore, the measurement invariance analyses show that the strong invariance property between the samples from different cultures holds, providing evidence that the ISI results obtained in different cultures are comparable. The factorial validity of the ISI is stable in different populations. More importantly, its invariance property across cultures suggests that the ISI is a valid measure of the insomnia severity construct across countries. Copyright © 2014 Elsevier B.V. All rights reserved.

Factorial structure and convergent and discriminant validity of the E (Empathy) scale.

Science.gov (United States)

Tran, Ulrich S; Laireiter, Anton-Rupert; Schmitt, David P; Neuner, Christine; Leibetseder, Max; Szente-Voracek, Sara Leyla; Voracek, Martin

2013-10-01

The Empathy (E) scale has been proposed as a theoretically and psychometrically more satisfying alternative to existing self-report measures of empathy. Its four scales (facets) cover both components (cognitive vs. emotional) and both reality statuses (fictitious vs. real-life) of empathy in pairwise combinations. Confirmatory factor analyses of the E-scale in an Austrian community sample (N = 794) suggested that one prior assumption, namely the mutual orthogonality of these facets, may partly need revision; particularly, the E-scale facets seemed to reflect more strongly differences in the reality statuses than in the components of empathy. Utilizing numerous informative psychological traits, the scale's convergent and discriminant validity were examined. E-scale scores were consistently predicted by sex-related and relationship-related constructs and measures of antisocial attitudes and behavior. Among the Big Five personality dimensions, openness emerged as a major positive correlate of empathy. Sex and age were demographic correlates of E-scale scores (higher in women and the younger). Findings were discussed with regards to the definition and measurement of empathy.

MODEL PENGELOLAAN TEACHING FACTORY SEKOLAH MENENGAH KEJURUAN

Directory of Open Access Journals (Sweden)

M Burhan R Wijaya

2013-02-01

Full Text Available This study aims to identify and develop management models Factory Teaching Vocational School through a series of tests and validation of the model with the approach of reasearch and Development. Teaching Factory Management Models at Vocational Schools is a concept that combines learning management approach learning Competency Based Training (CBT and Production Based Training (PBT in the real atmosphere so that the process of achieving competence or skill skills life skills (life skills in accordance with the standards of graduate work in the industrial world. In particular, this study aims to formulate design management model development Teaching Factory Vocational School. To achieve the research objectives above using the approach of Research and Development, through preliminary studies, design development models, testing and validation. Preliminary study phase is planned to take the flow / stage as follows: the study of literature, study / collection of field data, and a description and analysis of field findings (factual, namely: (1 the description of the characteristics of vocational school with a standard performance indicators that can be poured as the content of the development of Teaching Factory, (2 description of the characteristics and potential development group management model Tefa as an outcome groups to develop and implement management models Tefa for Vocational Schools (3 description of the characteristics of potential stakeholders to support the development and implementation TEFA management model, and (4 preparation of the management model TEFA for Vocational Schools excellence and innovative. Trial design done on a limited scale model group. Then the model was accompanied by outcome group to develop and implement a model TEFA for Vocational Schools to determine whether the model developed can be applied correctly. Data analysis in this study, the preliminary study stage, the findings or the facts about productive learning

Propiedades psicométricas y estructura factorial de la escala de aprendizaje autorregulado (EAA en adolescentes

Directory of Open Access Journals (Sweden)

María Antonieta Elvira-Valdes

2015-01-01

Full Text Available En este artículo de investigación se analizan las propiedades psicométricas y la estructura factorial de la Escala de Aprendizaje Autorregulado (EAA, diseñada para medir atributos o dimensiones autorregulatorias en el aprendizaje. La Escala fue aplicada a una muestra de 402 adolescentes, estudiantes de los últimos años de secundaria. La fiabilidad del instrumento mostró valores satisfactorios, con un Alfa de Cronbach de ,842. Mediante el análisis factorial de componentes principales, se identificaron cuatro factores consistentes con la teoría de la autorregulación. Los resultados del análisis factorial confirmatorio mostraron índices de ajuste que apoyan el modelo teórico de atributos del aprendizaje autorregulado y un modelo unifactorial para la medición del constructo, cuyo ajuste adecuado puede permitir su uso con fines investigativos en el contexto local y latinoamericano. Abstract Analyzed psychometric properties and factorial structures designed to measure learning dimensions and attributes using self-regulated learning scale (EAA are discussed in this research paper. 402 high school teenagers in high school were sampled; the test showed satisfactory results and the reliability instrument was Cronbach Alpha: 842. Through a factorial analysis of main components, four factors based on self regulation theory were indentified. The results of this factorial analysis showed high rates of learning and self-regulated theoretical attributes along with a factor model for measuring the building blocks for which appropriate adjustment may allow its use for future research purposes in local and Latin environments.

Confirmatory analysis method for zeranol, its metabolites and related mycotoxins in urine by liquid chromatography-negative ion electrospray tandem mass spectrometry

Energy Technology Data Exchange (ETDEWEB)

Bennekom, E.O. van; Brouwer, L.; Laurant, E.H.M.; Hooijerink, H.; Nielen, M.W.F

2002-11-25

The determination of the banned anabolic substance zeranol and the metabolites taleranol and zearalanone in bovine urine is complicated by the occurrence of the structurally-related mycotoxin zearalenone and the corresponding {alpha}- and {beta}-zearalenol metabolites which possess similar estrogenic properties. A liquid chromatography-negative ion electrospray tandem mass spectrometric method is presented for the confirmatory analysis of all six resorcylic acid lactones ('zeranols') in urine samples using deuterium-labelled internal standards. The method was validated as a confirmatory method for bovine urine samples according to new draft EU guidelines and showed good precision and linearity, and CC{alpha} and CC{beta} values of 0.02-0.30 and <1.0 ng ml{sup -1}, respectively. The applicability was demonstrated by comparing the results of an incurred sample with previous results on the same sample obtained by gas chromatography high resolution mass spectrometry. Preliminary data show that following a simple matrix solid phase dispersion clean-up, liver samples from poultry will be amenable to this method as well.

Physics at e+e- factories

International Nuclear Information System (INIS)

Lueth, V.; MacFarlane, D.B.

1991-02-01

Feasible designs are well advanced for high-luminosity e + e - storage rings which produce B 0 bar B 0 pairs either at rest or, in what appears to be a more promising option, boosted in the detector frame. Facilities which could provide samples of 30--100 fb -1 per year on the Υ(4S) will be proposed in early 1991. Here we examine the principal physics goal of such B Factories, namely CP violation in the b system. Methods in a variety of channels, estimated event samples, and detector requirements are all considered. We conclude that the physics argument for an e + e - B Factory is well documented, and compelling. 50 refs., 22 figs., 10 tabs

Design, analysis and presentation of factorial randomised controlled trials

Directory of Open Access Journals (Sweden)

Little Paul

2003-11-01

Full Text Available Abstract Background The evaluation of more than one intervention in the same randomised controlled trial can be achieved using a parallel group design. However this requires increased sample size and can be inefficient, especially if there is also interest in considering combinations of the interventions. An alternative may be a factorial trial, where for two interventions participants are allocated to receive neither intervention, one or the other, or both. Factorial trials require special considerations, however, particularly at the design and analysis stages. Discussion Using a 2 × 2 factorial trial as an example, we present a number of issues that should be considered when planning a factorial trial. The main design issue is that of sample size. Factorial trials are most often powered to detect the main effects of interventions, since adequate power to detect plausible interactions requires greatly increased sample sizes. The main analytical issues relate to the investigation of main effects and the interaction between the interventions in appropriate regression models. Presentation of results should reflect the analytical strategy with an emphasis on the principal research questions. We also give an example of how baseline and follow-up data should be presented. Lastly, we discuss the implications of the design, analytical and presentational issues covered. Summary Difficulties in interpreting the results of factorial trials if an influential interaction is observed is the cost of the potential for efficient, simultaneous consideration of two or more interventions. Factorial trials can in principle be designed to have adequate power to detect realistic interactions, and in any case they are the only design that allows such effects to be investigated.

Construct validity of the Italian version of the Mayer-Salovey-Caruso Emotional Intelligence Test (MSCEIT) v2.0.

Science.gov (United States)

Curci, Antonietta; Lanciano, Tiziana; Soleti, Emanuela; Zammuner, Vanda Lucia; Salovey, Peter

2013-01-01

In 2 studies, we assessed the construct validity of the Italian version of the Mayer-Salovey-Caruso Emotional Intelligence Test (MSCEIT) version 2.0. In Study 1, we administered the MSCEIT together with measures of crystallized and fluid intelligence, personality, and affect. In Study 2, we administered the MSCEIT together with indexes of dispositional coping, emotion regulation strategies, alexithymia, state-trait anxiety, depression, and depressive rumination. We evaluated the factorial structure of the MSCEIT with a confirmatory factor analysis model using data combined from Study 1 and 2. The results confirm that the MSCEIT Italian version satisfactorily discriminates emotional intelligence ability from crystallized and fluid intelligence, personality, and affect, and exhibits significant correlations with various psychological well-being criteria. Furthermore, data from both studies confirm that the factorial structure of MSCEIT is consistent with the theory on which it is based, although it was difficult to rule out alternative structures.

Hadronic atoms at a kaon factory

International Nuclear Information System (INIS)

Leon, M.

1982-01-01

Beyond doubt, the advent of a kaon factory will be of immense significance for the study of hadronic atoms. Here we will discuss some classes of experiments that certainly can and will be done at a kaon factory, as well as some very interesting possibilities which deserve investigation. Among the certains we include the observation of hadronic x rays from kaonic and μ - atoms, for both Z greater than one and for the isotopes of hydrogen, mainly for strong interaction information. More conjectural is the possibility of measuring Xi - and Ω - x rays

Russian factory inspection (1882-1918): cui bono?

OpenAIRE

Volodin , Andrei Y.

2008-01-01

This study deals with history of important state institution in late Russian Empire - factory inspection. Such aspects of institutional development as evolution of legislative regulations, growth of staff, and complication of functions (and particularly, mediation in labour conflicts) are scrutinized. This paper presents some results on Russian experience of labour law implementation seeking to determine and evaluate the role and efficiency of Russian factory inspectors in conflicting triangl...

Planned e+e- factories

International Nuclear Information System (INIS)

Le Duff, J.

1993-09-01

Various Beauty and Tau-Charm factories and projects are reviewed. Different machines (TRISTAN II, PEP II, CESR-B, the Dubna project and the European project) are compared and their design and parameters are described. (K.A.) 34 refs., 2 figs., 2 tabs

The Physics of the B Factories

International Nuclear Information System (INIS)

Bevan, A.J.; Golob, B.; Mannel, T.

2014-01-01

The inspiration for this book came from Fran@cois le Diberder. During his term as spokesperson for BABAR he laid down a vision for the two B Factory detector collaborations, BABAR and Belle, to work together on a book that would describe the methodologies used and physics results obtained by those experiments. A key ideal emphasized from the outset was that this book should be written from a pedagogical perspective; it should be of interest to the student and expert alike. This vision was presented during a BABAR collaboration meeting on the island of Elba in May 2008 and a follow up Belle collaboration meeting at KEK, with visiting colleagues from the BABAR collaboration, and was embraced by the community. A number of workshops involving people from the theoretical community as well as the two collaborations were held on four continents over the following years. The resulting book, ''The Physics of the B Factories'', is a testament to the way that this concept captured the zeitgeist on both sides of the Pacific Ocean. This book is divided into three parts, the first of which provides a brief description of the B Factories, including a short (though not exhaustive) historical perspective, as well as descriptions of the detectors, ancillary data acquisition systems and data (re)processing systems that were built by the two detector collaborations in the late 1990's. The second part of the book discusses tools and methods that are frequently used when analyzing the data collected. These range from details of low level reconstruction algorithms and abstract summaries of statistical methods to high level prescriptions used when evaluating systematic uncertainties on measurements of observables. The third part of the book is devoted to physics results. This includes sufficient theoretical discussion in order for the reader to understand the context of the work being described. We are indebted to our colleagues from the theoretical community who have helped us achieve

Analyzing Mathematics Beliefs of Pre-Service Teachers Using Confirmatory Factor Analysis

Directory of Open Access Journals (Sweden)

Mazlini Adnan

2011-12-01

Full Text Available Mathematics beliefs play an important role in enhancing the quality and the effectiveness of teaching and learning. This study analyzes the mathematics beliefs of 317 pre-service teachers from six Higher Education Institutions (HEIs (Government Public Universities who were randomly selected to participate in this study. Questionnaires consisting of twenty three items were given to the respondents during the data collection process. The validation of the items was done by using confirmatory factor analysis (CFA. In order to obtain a model fit for the measurement model of mathematics beliefs, several fit index tests such as CMINDF, GFI, AGFI, IFI, NFI, CFI, TLI and RMSEA were used. Constructivist beliefs and traditional beliefs were identified as the contributing factors in the model. The analysis also revealed that mathematics beliefs consist of structures of two hidden variables. The correlation between the two variables (constructivist beliefs and traditional beliefs is at a moderate level. Hence, pre-service teachers should be able to recognize their type of mathematics beliefs in order to become effective mathematics teachers.

Occupational hazards and safety measures amongst the paint factory workers in lagos, Nigeria.

Science.gov (United States)

Awodele, Olufunsho; Popoola, Temidayo D; Ogbudu, Bawo S; Akinyede, Akin; Coker, Herbert A B; Akintonwa, Alade

2014-06-01

The manufacture of paint involves a variety of processes that present with medical hazards. Safety initiatives are hence introduced to limit hazard exposures and promote workplace safety. This aim of this study is to assess the use of available control measures/initiatives in selected paint factories in Lagos West Senatorial District, Nigeria. A total of 400 randomly selected paint factory workers were involved in the study. A well-structured World Health Organization standard questionnaire was designed and distributed to the workers to elicit information on awareness to occupational hazards, use of personal protective devices, and commonly experienced adverse symptoms. Urine samples were obtained from 50 workers randomly selected from these 400 participants, and the concentrations of the heavy metals (lead, cadmium, arsenic, and chromium) were determined using atomic absorption spectroscopy. The results show that 72.5% of the respondents are aware of the hazards associated with their jobs; 30% have had formal training on hazards and safety measures; 40% do not use personal protective devices, and 90% of the respondents reported symptoms relating to hazard exposure. There was a statistically significant (p metal concentrations in the urine samples obtained from paint factory workers as compared with nonfactory workers. The need to develop effective frameworks that will initiate the integration and ensure implementation of safety regulations in paint factories is evident. Where these exist, there is a need to promote adherence to these practice guidelines.

The Empirical Verification of an Assignment of Items to Subtests : The Oblique Multiple Group Method Versus the Confirmatory Common Factor Method

NARCIS (Netherlands)

Stuive, Ilse; Kiers, Henk A.L.; Timmerman, Marieke E.; ten Berge, Jos M.F.

2008-01-01

This study compares two confirmatory factor analysis methods on their ability to verify whether correct assignments of items to subtests are supported by the data. The confirmatory common factor (CCF) method is used most often and defines nonzero loadings so that they correspond to the assignment of

Residues leaching from 'Factory of barren ores'

International Nuclear Information System (INIS)

Rakhmatov, N.; Khakimov, N.; Nazarov, Kh.M.; Barotov, A.M.

2012-01-01

The objective of the present work is safe management of residues from Factory of Barren Ores, their reprocessing, expenditures reduction for remediation of Istiklol city former uranium tailings. For this purpose, some experiences were adopted - Factory of Barren Ores tailing use for filling up the open pit where water with uranium content 3-5 mg/l is located. Factory of Barren Ores waste are passed through heap leaching and have some amount of uranium salts dissolved in water. Thus, we propose to dissolve uranium from Factory of Barren Ores wastes with uranium bearing water flowing out from gallery and filling up the open-pit by radioactive wastes. In so doing, uranium content flowing out from gallery will increase twice, and further, passing them through apricot's shell, as a sorbent, we will clean the water against radionuclides. Residue samples with uranium content 0,015% from Factory of Barren Ores and uranium bearing waters from gallery 1 with uranium content 0,0025 g/l were used for laboratory tests. After which, a slurry was prepared by means of residue mixing with water in ratio of solid and liquid phases (S:L) - 1:2 and 9,7 ml of sulfuric acid (Ρ=1,82) was added which corresponds consumption by H 2 SO 4 176,54 kg/t. For the first test, leaching was carried out during 4 hours at ph=1,6 at room temperature. For the second test, leaching was carried out at 60 d eg C a nd ph=1,6 during 4 hours. Slurry heating and mixing was carried out by means of magnetic mixer. The basic residue leaching indicators are provided in this article.

Comparison of four techniques for the confirmatory identification of Neisseria gonorrhoeae

International Nuclear Information System (INIS)

Jacobs, P.F.

1980-01-01

The authors have compared four assay techniques for the confirmatory identification of Neisseria gonorrhoeae. On of these is a radiometric assay, based on the measurement of liberated radiolabelled CO 2 from metabolized carbohydrates which have been tagged with 14 C. The assay uses glucose, maltose and fructose as its differentiating sugars, plus the ONPG reaction, and can be read in three hours. (Auth.)

Pseudomonas putida as a microbial cell factory

DEFF Research Database (Denmark)

Wigneswaran, Vinoth

for sustainable production of chemicals, which can be achieved by microbial cell factories. The work presented in this PhD thesis elucidates the application of Pseudomonas putida as a microbial cell factory for production of the biosurfactant rhamnolipid. The rhamnolipid production was achieved by heterologous...... phase. The genomic alterations were identified by genome sequencing and revealed parallel evolution. Glycerol was also shown to be able to support biofilm growth and as a result of this it can be used as an alternative substrate for producing biochemicals in conventional and biofilm reactors. The use...... of biofilm as a production platform and the usage of glycerol as a feedstock show the potential of using microbial cell factories in the transition toward sustainable production of chemicals. Particularly, the applicability of biofilm as a production platform can emerge as a promising alternative...

Male Role Norms Inventory-Short Form (MRNI-SF): development, confirmatory factor analytic investigation of structure, and measurement invariance across gender.

Science.gov (United States)

Levant, Ronald F; Hall, Rosalie J; Rankin, Thomas J

2013-04-01

The current study reports the development from the Male Role Norms Inventory-Revised (MRNI-R; Levant, Rankin, Williams, Hasan, & Smalley, 2010) of the 21-item MRNI-Short Form (MRNI-SF). Confirmatory factor analysis of MRNI-SF responses from a sample of 1,017 undergraduate participants (549 men, 468 women) indicated that the best fitting "bifactor" model incorporated the hypothesized 7-factor structure while explicitly modeling an additional, general traditional masculinity ideology factor. Specifically, each item-level indicator loaded on 2 factors: a general traditional masculinity ideology factor and a specific factor corresponding to 1 of the 7 hypothesized traditional masculinity ideology norms. The bifactor model was assessed for measurement invariance across gender groups, with findings of full configural invariance and partial metric invariance, such that factor loadings were equivalent across the gender groups for the 7 specific factors but not for the general traditional masculinity ideology factor. Theoretical explanations for this latter result include the potential that men's sense of self or identity may be engaged when responding to questions asking to what extent they agree or disagree with normative statements about their behavior, a possibility that could be investigated in future research by examining the associations of the general and specific factors with measures of masculine identity. Additional exploratory invariance analyses demonstrated latent mean differences between men and women on 4 of the 8 factors, and equivocal results for invariance of item intercepts, item uniquenesses, and factor variances-covariances.

Engineering Robustness of Microbial Cell Factories.

Science.gov (United States)

Gong, Zhiwei; Nielsen, Jens; Zhou, Yongjin J

2017-10-01

Metabolic engineering and synthetic biology offer great prospects in developing microbial cell factories capable of converting renewable feedstocks into fuels, chemicals, food ingredients, and pharmaceuticals. However, prohibitively low production rate and mass concentration remain the major hurdles in industrial processes even though the biosynthetic pathways are comprehensively optimized. These limitations are caused by a variety of factors unamenable for host cell survival, such as harsh industrial conditions, fermentation inhibitors from biomass hydrolysates, and toxic compounds including metabolic intermediates and valuable target products. Therefore, engineered microbes with robust phenotypes is essential for achieving higher yield and productivity. In this review, the recent advances in engineering robustness and tolerance of cell factories is described to cope with these issues and briefly introduce novel strategies with great potential to enhance the robustness of cell factories, including metabolic pathway balancing, transporter engineering, and adaptive laboratory evolution. This review also highlights the integration of advanced systems and synthetic biology principles toward engineering the harmony of overall cell function, more than the specific pathways or enzymes. © 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

A tau-charm-factory at Argonne

International Nuclear Information System (INIS)

Norem, J.; Repond, J.

1994-01-01

In this paper we explore the possibility of building a tau-charm-factory at the Argonne National Laboratory. A tau-charm-factory is an e + e - collider with a center-of-mass energy between 3.0 GeV and 5.0 GeV and a luminosity of at least 1 x 10 33 cm -2 s -1 . Once operational, the facility will produce large samples of τ pairs, charm mesons, and charmonium with either negligible or well understood backgrounds. This will lead to high precision measurements in the second generation quark and the third generation lepton sectors that cannot be done at other facilities. Basic physical properties and processes, such as the tau neutrino mass, rare tau decays, charm decay constants, rare charm meson decays, neutral D 0 -- meson mixing, and many more will be studied with unique precision. An initial design of the collider including the injector system is described. The design shows that a luminosity of at least 1 x 10 33 cm -2 s -1 can be achieved over the entire center-of-mass energy range of the factory

Implementation of IEC Generic Models of Type 1 Wind Turbine Generator in DIgSILENT PowerFactory

Institute of Scientific and Technical Information of China (English)

Haoran ZHAO; Qiuwei WU; Ioannis MARGARIS; Poul S(O)RENSEN

2013-01-01

The implementation method for the International Electrotechnical Commission (IEC) generic models of Type 1 wind turbine generator (WTG) in DIgSILENT PowerFactory is presented.The following items are described,i.e.model structure,model blocks and how to implement these blocks in the PowerFactory environment.Case studies under both normal and fault conditions are done with the implemented IEC generic models of Type 1 WTG,and dynamic responses are captured and analyzed.The case study results show that the IEC generic models of Type 1 WTG can correctly represent the performances of Type 1 WTG under both normal and fault conditions.

SYSTEMS BIOLOGY AND METABOLIC ENGINEERING OF ARTHROSPIRA CELL FACTORIES

Directory of Open Access Journals (Sweden)

Amornpan Klanchui

2012-10-01

Full Text Available Arthrospira are attractive candidates to serve as cell factories for production of many valuable compounds useful for food, feed, fuel and pharmaceutical industries. In connection with the development of sustainable bioprocessing, it is a challenge to design and develop efficient Arthrospira cell factories which can certify effective conversion from the raw materials (i.e. CO2 and sun light into desired products. With the current availability of the genome sequences and metabolic models of Arthrospira, the development of Arthrospira factories can now be accelerated by means of systems biology and the metabolic engineering approach. Here, we review recent research involving the use of Arthrospira cell factories for industrial applications, as well as the exploitation of systems biology and the metabolic engineering approach for studying Arthrospira. The current status of genomics and proteomics through the development of the genome-scale metabolic model of Arthrospira, as well as the use of mathematical modeling to simulate the phenotypes resulting from the different metabolic engineering strategies are discussed. At the end, the perspective and future direction on Arthrospira cell factories for industrial biotechnology are presented.

Subgroup analyses in confirmatory clinical trials: time to be specific about their purposes

NARCIS (Netherlands)

Tanniou, J.; Tweel, I. van der; Teerenstra, S.; Roes, K.C.

2016-01-01

BACKGROUND: It is well recognized that treatment effects may not be homogeneous across the study population. Subgroup analyses constitute a fundamental step in the assessment of evidence from confirmatory (Phase III) clinical trials, where conclusions for the overall study population might not hold.

Proceedings of the 2-nd workshop on JINR tau-charm factory

International Nuclear Information System (INIS)

Aleksandrov, V.S.; Perel'shtejn, E.A.

1993-01-01

Application of tau-charm factory for investigation of hadronic decay and charged leptonic weak interaction is considered. JINR tau-charm-factory design and magnetic and vacuum systems of the booster ring are described. New types of silicon microstrip detector sand BGO-counters developed for tau-charm-factory are proposed

Factorial Analysis of Profitability

OpenAIRE

Georgeta VINTILA; Ilie GHEORGHE; Ioana Mihaela POCAN; Madalina Gabriela ANGHEL

2012-01-01

The DuPont analysis system is based on decomposing the profitability ratio in factors of influence. This paper describes the factorial analysis of profitability based on the DuPont system. Significant importance is given to the impact on various indicators on the shares value and profitability.

Phenomenology of neutrino oscillations at the neutrino factory

International Nuclear Information System (INIS)

Tang, Jian

2011-01-01

We consider the prospects for a neutrino factory measuring mixing angles, the CP violating phase and mass-squared differences by detecting wrong-charge muons arising from the chain μ + → ν e → ν μ → μ - and the right-charge muons coming from the chain μ + → anti ν μ → anti ν μ → μ - (similar to μ - chains), where ν e → ν μ and anti ν μ → anti ν μ are neutrino oscillation channels through a long baseline. First, we study physics with near detectors and consider the treatment of systematic errors including cross section errors, flux errors, and background uncertainties. We illustrate for which measurements near detectors are required, discuss how many are needed, and what the role of the flux monitoring is. We demonstrate that near detectors are mandatory for the leading atmospheric parameter measurements if the neutrino factory has only one baseline, whereas systematic errors partially cancel if the neutrino factory complex includes the magic baseline. Second, we perform the baseline and energy optimization of the neutrino factory including the latest simulation results from the magnetized iron neutrino detector (MIND). We also consider the impact of τ decays, generated by appearance channels ν μ → ν τ and ν e → ν τ , on the discovery reaches of the mass orderings, the leptonic CP violation, and the non-zero θ 13 , which we find to be negligible for the considered detector. Third, we make a comparison of a high energy neutrino factory to a low energy neutrino factory and find that they are just two versions of the same experiment optimized for different regions of the parameter space. In addition, we briefly comment on whether it is useful to build the bi-magic baseline at the low energy neutrino factory. Finally, the effects of one additional massive sterile neutrino are discussed in the context of a combined short and long baseline setup. It is found that near detectors can provide the required sensitivity at the

Hazardous factories: Nigerian evidence.

Science.gov (United States)

Oloyede, Olajide

2005-06-01

The past 15 years have seen an increasing governmental and corporate concern for the environment worldwide. For governments, information about the environmental performance of the industrial sector is required to inform macro-level decisions about environmental targets such as those required to meet UN directives. However, in many African, Asian, and Latin American countries, researching and reporting company environmental performance is limited. This article serves as a contribution to filling the gap by presenting evidence of physical and chemical risk in Nigerian factories. One hundred and three factories with a total of 5,021 workers were studied. One hundred and twenty physical and chemical hazards were identified and the result shows a high number of workers exposed to such hazards. The study also reveals that workers' awareness level of chemical hazards was high. Yet the danger was perceived in behavioral terms, especially by manufacturing firms, which tend to see environmental investment in an increasingly global economy as detrimental to profitability.

Confirmatory factor analysis and recommendations for improvement of the Autonomy-Preference-Index (API).

Science.gov (United States)

Simon, Daniela; Kriston, Levente; Loh, Andreas; Spies, Claudia; Scheibler, Fueloep; Wills, Celia; Härter, Martin

2010-09-01

Validation of the German version of the Autonomy-Preference-Index (API), a measure of patients' preferences for decision making and information seeking. Stepwise confirmatory factor analysis was conducted on a sample of patients (n = 1592) treated in primary care for depression (n = 186), surgical and internal medicine inpatients (n = 811) and patients with minor trauma treated in an emergency department (n = 595). An initial test of the model was done on calculation and validation halves of the sample. Both local and global indexes-of-fit suggested modifications to the scale. The scale was modified and re-tested in the calculation sample and confirmed in the validation sample. Subgroup analyses for age, gender and type of treatment setting were also performed. The confirmatory analysis led to a modified version of the API with better local and global indexes-of-fit for samples of German-speaking patients. Two items of the sub-scale, 'preference for decision-making', and one item of the sub-scale, 'preference for information seeking', showed very low reliability scores and were deleted. Thus, several global indexes-of-fit clearly improved significantly. The modified scale was confirmed on the validation sample with acceptable to good indices of fit. Results of subgroup analyses indicated that no adaptations were necessary. This first confirmatory analysis for a German-speaking population showed that the API was improved by the removal of several items. There were theoretically plausible explanations for this improvement suggesting that the modifications might also be appropriate in English and other language versions.

A Persian version of the parental bonding instrument: factor structure and psychometric properties.

Science.gov (United States)

Behzadi, Behnaz; Parker, Gordon

2015-02-28

The Parental Bonding Instrument (PBI) is a widely used self-report measure for quantifying key parenting styles as perceived by the child during its first 16 years. While its development study identified two key parental dimensions, subsequent studies have variably confirmed those two or argued for one or more additional parental constructs. We developed a Persian translation of the PBI and administered it to a sample of 340 high school students. The construct validity of the Persian PBI was examined by Exploratory Factor Analysis while Confirmatory Factor Analysis was used to identify the most adequate model. Analyses of the Persian PBI favored a four-factor model for both parental forms. The Persian PBI has a factorial structure consistent with constructs identified in western cultures, as well as high internal consistency and test-retest reliability. Multivariate analyses indicated significant differences between boys and girls across some factors. The PBI appears an acceptable and appropriate measure for quantifying parent-child bonding in Iranian samples. Copyright © 2014 Elsevier Ireland Ltd. All rights reserved.

The simulation of air recirculation and fire/explosion phenomena within a semiconductor factory

International Nuclear Information System (INIS)

I, Yet-Pole; Chiu, Y.-L.; Wu, S.-J.

2009-01-01

The semiconductor industry is the collection of capital-intensive firms that employ a variety of hazardous chemicals and engage in the design and fabrication of semiconductor devices. Owing to its processing characteristics, the fully confined structure of the fabrication area (fab) and the vertical airflow ventilation design restrict the applications of traditional consequence analysis techniques that are commonly used in other industries. The adverse situation also limits the advancement of a fire/explosion prevention design for the industry. In this research, a realistic model of a semiconductor factory with a fab, sub-fabrication area, supply air plenum, and return air plenum structures was constructed and the computational fluid dynamics algorithm was employed to simulate the possible fire/explosion range and its severity. The semiconductor factory has fan module units with high efficiency particulate air filters that can keep the airflow uniform within the cleanroom. This condition was modeled by 25 fans, three layers of porous ceiling, and one layer of porous floor. The obtained results predicted very well the real airflow pattern in the semiconductor factory. Different released gases, leak locations, and leak rates were applied to investigate their influence on the hazard range and severity. Common mitigation measures such as a water spray system and a pressure relief panel were also provided to study their potential effectiveness to relieve thermal radiation and overpressure hazards within a fab. The semiconductor industry can use this simulation procedure as a reference on how to implement a consequence analysis for a flammable gas release accident within an air recirculation cleanroom

Meson factories

International Nuclear Information System (INIS)

Dicello, J.F.; Zaider, M.; Bradbury, J.N.

1979-01-01

Technological improvements in accelerator design in the 1960's resulted in the capability to develop medium-energy proton accelerators with beam intensities of almost 1 mA. These beams are able to produce fluxes of secondary particles, including pions, muons, neutrinos, and neutrons, which are as much as 10,000 times as intense as those previously available. Those machines built for optimum meson production are commonly called meson factories. The characteristics of these facilities are reviewed, and the present programs in applied research, and some potential areas of future work are discussed

Investigating the factorial structure and availability of work time control in a representative sample of the Swedish working population.

Science.gov (United States)

Albrecht, Sophie C; Kecklund, Göran; Tucker, Philip; Leineweber, Constanze

2016-05-01

Past research has often neglected the sub-dimensions of work time control (WTC). Moreover, differences in levels of WTC with respect to work and demographic characteristics have not yet been examined in a representative sample. We investigated these matters in a recent sample of the Swedish working population. The study was based on the 2014 data collection of the Swedish Longitudinal Occupational Survey of Health. We assessed the structure of the WTC measure using exploratory and confirmatory factor analysis. Differences in WTC by work and demographic characteristics were examined with independent samplet-tests, one-way ANOVAs and gender-stratified logistic regressions. Best model fit was found for a two-factor structure that distinguished between control over daily hours and control over time off (root mean square error of approximation = 0.06; 95% CI 0.04 to 0.09; Comparative Fit Index (CFI) = 0.99). Women, shift and public-sector workers reported lower control in relation to both factors. Age showed small associations with WTC, while a stronger link was suggested for civil status and family situation. Night, roster and rotating shift work seemed to be the most influential factors on reporting low control over daily hours and time off. Our data confirm the two-dimensional structure underlying WTC, namely the components 'control over daily hours' and 'control over time off'. Women, public-sector and shift workers reported lower levels of control. Future research should examine the public health implications of WTC, in particular whether increased control over daily hours and time off can reduce health problems associated with difficult working-time arrangements. © 2015 the Nordic Societies of Public Health.

A confirmatory factor analysis of the Harvard Trauma Questionnaire and the Inventory of Complicated Grief-Revised: Are we measuring complicated grief or posttraumatic stress?

DEFF Research Database (Denmark)

O'Connor, Maja; Lasgaard, Mathias Kamp; Shevlin, Mark

2010-01-01

  The Inventory of Complicated Grief Revised (ICG-R) assesses symptoms of complicated grief in bereaved individuals. The aim of this study was to assess the factorial structure of Complicated Grief (CG) and investigate the relationship between CG and Posttraumatic Stress Disorder through the asse......  The Inventory of Complicated Grief Revised (ICG-R) assesses symptoms of complicated grief in bereaved individuals. The aim of this study was to assess the factorial structure of Complicated Grief (CG) and investigate the relationship between CG and Posttraumatic Stress Disorder through...... and the three factors of PTSD, as defined by the DSM-IV (American Psychiatric Association, 1994), were allowed to correlate provided the best fit. The results therefore indicate high levels of conceptual overlap among the dimensions of CG and PTSD....

The independence of schizotypy from affective temperaments--a combined confirmatory factor analysis of SPQ and the short TEMPS-A.

Science.gov (United States)

Preti, Antonio; Corrias, Irene; Gabbrielli, Mersia; Lai, Veronica; Muratore, Tamara; Pintus, Elisa; Pintus, Mirra; Sanna, Sara; Scanu, Rosanna; Tronci, Debora; Vellante, Marcello; Siddi, Sara; Petretto, Donatella Rita; Carta, Mauro Giovanni

2015-01-30

Sparse evidence of a co-aggregation of the risk of schizophrenia and bipolar disorder provides support for a shared but nonspecific genetic etiology of bipolar disorder and schizophrenia. Temperaments are conceptualized as trait sub-syndromic conditions of major pathologies. This study set out to test the hypothesis of a continuum between schizotypy and affective temperaments versus the alternative hypothesis of their independence based on a cross-sectional, survey design involving 649 (males: 47%) college students. The short 39-item TEMPS-A and the SPQ were used as measures of the affective temperaments and of schizotypy, respectively. Confirmatory factor analyses were applied to a unidimensional model, to a standard correlate traits model, to second-order representations of a common latent structure, and to a bifactor model. Confirmatory bifactor modeling provided evidence against a complete independence of the dimensions subsumed by the affective and the schizotypal traits. The best solution distinguished between two sub-domains grouping positive symptoms and negative symptoms as measured by the SPQ subscales, and a sub-domain related to the affective temperaments as measured by the TEMPS-A. Limitations due to the use of subscales from two different tools should be taken into account. Copyright © 2014 Elsevier Ireland Ltd. All rights reserved.

Chronic alterations in growth hormone/insulin-like growth factor-I signaling lead to changes in mouse tendon structure

DEFF Research Database (Denmark)

Nielsen, R H; Clausen, N M; Schjerling, P

2014-01-01

transgenic mice that expressed bovine GH (bGH) and had high circulating levels of GH and IGF-I, 2) dwarf mice with a disrupted GH receptor gene (GHR-/-) leading to GH resistance and low circulating IGF-I, and 3) a wild-type control group (CTRL). We measured the ultra-structure, collagen content and m......The growth hormone/insulin-like growth factor-I (GH/IGF-I) axis is an important stimulator of collagen synthesis in connective tissue, but the effect of chronically altered GH/IGF-I levels on connective tissue of the muscle-tendon unit is not known. We studied three groups of mice; 1) giant......-/- mice had significantly lower collagen fibril volume fraction in Achilles tendon, as well as decreased mRNA expression of IGF-I isoforms and collagen types I and III in muscle compared to CTRL. In contrast, the mRNA expression of IGF-I isoforms and collagens in bGH mice was generally high in both tendon...

Food-Energy Interactive Tradeoff Analysis of Sustainable Urban Plant Factory Production Systems

Directory of Open Access Journals (Sweden)

Li-Chun Huang

2018-02-01

Full Text Available This research aims to analyze the food–energy interactive nexus of sustainable urban plant factory systems. Plant factory systems grow agricultural products within artificially controlled growing environment and multi-layer vertical growing systems. The system controls the supply of light, temperature, humidity, nutrition, water, and carbon dioxide for growing plants. Plant factories are able to produce consistent and high-quality agricultural products within less production space for urban areas. The production systems use less labor, pesticide, water, and nutrition. However, food production of plant factories has many challenges including higher energy demand, energy costs, and installation costs of artificially controlled technologies. In the research, stochastic optimization model and linear complementarity models are formulated to conduct optimal and equilibrium food–energy analysis of plant factory production. A case study of plant factories in the Taiwanese market is presented.

Investigation of cadmium pollution in the spruce saplings near the metal production factory.

Science.gov (United States)

Hashemi, Seyed Armin; Farajpour, Ghasem

2016-02-01

Toxic metals such as lead and cadmium are among the pollutants that are created by the metal production factories and disseminated in the nature. In order to study the quantity of cadmium pollution in the environment of the metal production factories, 50 saplings of the spruce species at the peripheries of the metal production factories were examined and the samples of the leaves, roots, and stems of saplings planted around the factory and the soil of the environment of the factory were studied to investigate pollution with cadmium. They were compared to the soil and saplings of the spruce trees planted outside the factory as observer region. The results showed that the quantity of pollution in the leaves, stems, and roots of the trees planted inside the factory environment were estimated at 1.1, 1.5, and 2.5 mg/kg, respectively, and this indicated a significant difference with the observer region (p metal production factory was estimated at 6.8 mg/kg in the depth of 0-10 cm beneath the level of the soil. The length of roots in the saplings planted around the factory of metal production stood at 11 and 14.5 cm in the observer region which had a significant difference with the observer region (p production processes in the factory. © The Author(s) 2013.

The Fear of Pain Questionnaire-III and the Fear of Pain Questionnaire-Short Form: a confirmatory factor analysis

DEFF Research Database (Denmark)

Vambheim, Sara M.; Lyby, Peter Solvoll; Aslaksen, Per M.

2017-01-01

.Aims and methods: The purpose of the study was to investigate the model fit, reliability and validity of the FPQ-III and the FPQ-SF in a Norwegian nonclinical sample, using confirmatory factor analysis (CFA). The second aim was to explore the model fit of the two scales in male and female subgroups separately...... the questionnaires, the model fit, validity and reliability were compared across sex using CFA.Results: The results revealed that both models' original factor structures had poor fit. However, the FPQ-SF had a better fit overall, compared to the FPQ-III. The model fit of the two models differed across sex...

Neutrinos: from the Workshop to the Factory

CERN Multimedia

2001-01-01

Over the next 5 years much work will be done to reach a theoretical and practical description of a neutrino factory. How could this project turn out to be an interesting future option for CERN? Neutrino beams travelling from CERN to the Canary Islands? And to the Svalbard archipelago in Norway? Or even to the Pyhaesalmi Mine in Finland? Why neutrinos? And why so far? The answers provide one of CERN's next challenging options: the construction of a high-energy muon storage ring to provide neutrino beams. This project, nicknamed 'neutrino factory', now figures in CERN's middle term plan as a recognized and supported research and development project. International collaborations, with other European laboratories and also with America and Japan, are now being set up. Long baseline locations for neutrino oscillations studies at a CERN based neutrino factory. Early in its history, LEP established that there exist just three kinds of light neutrinos, those associated with the electron, muon, and tau leptons. For a...

Incense and Joss Stick Making in Small Household Factories, Thailand

Directory of Open Access Journals (Sweden)

S Siripanich

2014-07-01

Full Text Available Background: Incense and joss stick are generally used in the world. Most products were made in small household factories. There are many environmental and occupational hazards in these factories. Objective: To evaluate the workplace environmental and occupational hazards in small household incense and joss stick factories in Roi-Et, Thailand. Methods: Nine small household factories in rural areas of Roi-Et, Thailand, were studied. Dust concentration and small aerosol particles were counted through real time exposure monitoring. The inductively coupled plasma optical emission spectrometry (ICP-OES was used for quantitative measurement of heavy metal residue in incense products. Results: Several heavy metals were found in dissolved dye and joss sticks. Those included barium, manganese, and lead. Rolling and shaking processes produced the highest concentration of dust and aerosols. Only 3.9 % of female workers used personal protection equipment. Conclusion: Dust and chemicals were major threats in small household incense and joss stick factories in Thailand. Increasing awareness towards using personal protection equipment and emphasis on elimination of environmental workplace hazards should be considered to help the workers of this industry.

A confirmatory investigation of a job demands-resources model using a categorical estimator.

Science.gov (United States)

de Beer, Leon; Rothmann, Sebastiaan; Pienaar, Jaco

2012-10-01

A confirmatory investigation of a job demands-resources model was conducted with alternative methods, in a sample of 15,633 working adults aggregated from various economic sectors. The proposed model is in line with job demands-resources theory and assumes two psychological processes at work which are collectively coined "the dual process." The first process, the energetic, presents that job demands lead to ill-health outcomes due to burnout. The second process, the motivational, indicates that job resources lead to organizational commitment due to work engagement. Structural equation modelling analyses were implemented with a categorical estimator. Mediation analyses of each of the processes included bootstrapped indirect effects and kappa-squared values to apply qualitative labels to effect sizes. The relationship between job resources and organizational commitment was mediated by engagement with a large effect. The relationship between job demands and ill-health was mediated by burnout with a medium effect. The implications of the results for theory and practice were discussed.

The Strengths and Difficulties Questionnaire-Parents for Italian School-Aged Children: Psychometric Properties and Norms.

Science.gov (United States)

Tobia, Valentina; Marzocchi, Gian Marco

2018-02-01

The Strengths and Difficulties Questionnaire [SDQ; (1)] is a multi-informant instrument for screening developmental psychopathology. This study contributes to the validation of the Italian SDQ-Parent version (SDQ-P), analyzing its factorial structure, providing norms and investigating cross-informant agreement (parents-teachers). The SDQ-P and the SDQ-Teacher version (SDQ-T) were completed for 1917 primary and middle school students. Confirmatory factor analyses were performed to compare two factorial structures: the original five-factor model and the structure obtained in a past Italian study (2). The original model showed the best fit. Significant differences by gender and school grade were found; norms were provided separately for males and females attending 1st-2nd, 3rd-5th and 6th-8th grades. Finally, the analysis of parent-teacher agreement showed correlations ranging from small (prosocial behavior) to large (hyperactivity-inattention). This study offers some reflections on the best way to use this instrument in a community sample.

The Physics of the B Factories

Energy Technology Data Exchange (ETDEWEB)

Bevan, A.J. [Queen Mary Univ., London (United Kingdom); Golob, B. [Ljubljana Univ. (Slovenia). Faculty of Mathematics and Physics; J. Stefan Institute, Ljubljana (Slovenia); Mannel, T. [Siegen Univ. (Germany). Theoretische Physik 1; Collaboration: BABAR Collaboration; Belle Collaboration; and others

2014-11-15

The inspiration for this book came from Fran@cois le Diberder. During his term as spokesperson for BABAR he laid down a vision for the two B Factory detector collaborations, BABAR and Belle, to work together on a book that would describe the methodologies used and physics results obtained by those experiments. A key ideal emphasized from the outset was that this book should be written from a pedagogical perspective; it should be of interest to the student and expert alike. This vision was presented during a BABAR collaboration meeting on the island of Elba in May 2008 and a follow up Belle collaboration meeting at KEK, with visiting colleagues from the BABAR collaboration, and was embraced by the community. A number of workshops involving people from the theoretical community as well as the two collaborations were held on four continents over the following years. The resulting book, ''The Physics of the B Factories'', is a testament to the way that this concept captured the zeitgeist on both sides of the Pacific Ocean. This book is divided into three parts, the first of which provides a brief description of the B Factories, including a short (though not exhaustive) historical perspective, as well as descriptions of the detectors, ancillary data acquisition systems and data (re)processing systems that were built by the two detector collaborations in the late 1990's. The second part of the book discusses tools and methods that are frequently used when analyzing the data collected. These range from details of low level reconstruction algorithms and abstract summaries of statistical methods to high level prescriptions used when evaluating systematic uncertainties on measurements of observables. The third part of the book is devoted to physics results. This includes sufficient theoretical discussion in order for the reader to understand the context of the work being described. We are indebted to our colleagues from the theoretical community who

Confirmatory factor analysis of teaching and learning guiding principles instrument among teacher educators in higher education institutions

Science.gov (United States)

Masuwai, Azwani; Tajudin, Nor'ain Mohd; Saad, Noor Shah

2017-05-01

The purpose of this study is to develop and establish the validity and reliability of an instrument to generate teaching and learning guiding principles using Teaching and Learning Guiding Principles Instrument (TLGPI). Participants consisted of 171 Malaysian teacher educators. It is an essential instrument to reflect in generating the teaching and learning guiding principles in higher education level in Malaysia. Confirmatory Factor Analysis has validated all 19 items of TLGPI whereby all items indicated high reliability and internal consistency. A Confirmatory Factor Analysis also confirmed that a single factor model was used to generate teaching and learning guiding principles.

App Factory: A flexible approach to rehabilitation engineering in an era of rapid technology advancement.

Science.gov (United States)

Jones, Michael; Mueller, James; Morris, John

2017-01-01

This article describes a flexible and effective approach to research and development in an era of rapid technological advancement. The approach relies on secondary dispersal of grant funds to commercial developers through a competitive selection process. This "App Factory" model balances the practical reliance on multi-year funding needed to sustain a rehabilitation engineering research center (RERC), with the need for agility and adaptability of development efforts undertaken in a rapidly changing technology environment. This approach also allows us to take advantage of technical expertise needed to accomplish a particular development task, and provides incentives to deliver successful products in a cost-effective manner. In this article, we describe the App Factory structure, process, and results achieved to date; and we discuss the lessons learned and the potential relevance of this approach for other grant-funded research and development efforts. Data presented on the direct costs and number of downloads of the 16 app development projects funded in the App Factory's first 3 years show that it can be an effective means for supporting focused, short-term assistive technology development projects.

Comparison of Multispot EIA with Western blot for confirmatory serodiagnosis of HIV.

Science.gov (United States)

Torian, Lucia V; Forgione, Lisa A; Punsalang, Amado E; Pirillo, Robert E; Oleszko, William R

2011-12-01

Recent improvements in the sensitivity of immunoassays (IA) used for HIV screening, coupled with increasing recognition of the importance of rapid point-of-care testing, have led to proposals to adjust the algorithm for serodiagnosis of HIV so that screening and confirmation can be performed using a dual or triple IA sequence that does not require Western blotting for confirmation. One IA that has been proposed as a second or confirmatory test is the Bio-Rad Multispot(®) Rapid HIV-1/HIV-2 Test. This test would have the added advantage of differentiating between HIV-1 and HIV-2 antibodies. To compare the sensitivity and type-specificity of an algorithm combining a 3rd generation enzyme immunoassay (EIA) followed by a confirmatory Multispot with the conventional algorithm that combines a 3rd generation EIA (Bio-Rad GS HIV-1/HIV-2 Plus O EIA) followed by confirmatory Western blot (Bio-Rad GS HIV-1 WB). 8760 serum specimens submitted for HIV testing to the New York City Public Health Laboratory between May 22, 2007, and April 30, 2010, tested repeatedly positive on 3rd generation HIV-1-2+O EIA screening and received parallel confirmatory testing by WB and Multispot (MS). 8678/8760 (99.1%) specimens tested WB-positive; 82 (0.9%) tested WB-negative or indeterminate (IND). 8690/8760 specimens (99.2%) tested MS-positive, of which 14 (17.1%) had been classified as negative or IND by WB. Among the HIV-1 WB-positive specimens, MS classified 26 (0.29%) as HIV-2. Among the HIV-1 WB negative and IND, MS detected 12 HIV-2. MS detected an additional 14 HIV-1 infections among WB negative or IND specimens, differentiated 26 HIV-1 WB positives as HIV-2, and detected 12 additional HIV-2 infections among WB negative/IND. A dual 3rd generation EIA algorithm incorporating MS had equivalent HIV-1 sensitivity to the 3rd generation EIA-WB algorithm and had the added advantage of detecting 12 HIV-2 specimens that were not HIV-1 WB cross-reactors. In this series an algorithm using EIA

Phenomenology of neutrino oscillations at the neutrino factory

Energy Technology Data Exchange (ETDEWEB)

Tang, Jian

2011-12-19

We consider the prospects for a neutrino factory measuring mixing angles, the CP violating phase and mass-squared differences by detecting wrong-charge muons arising from the chain {mu}{sup +} {yields} {nu}{sub e} {yields} {nu}{sub {mu}} {yields} {mu}{sup -} and the right-charge muons coming from the chain {mu}{sup +} {yields} anti {nu}{sub {mu}} {yields} anti {nu}{sub {mu}} {yields} {mu}{sup -} (similar to {mu}{sup -} chains), where {nu}{sub e} {yields} {nu}{sub {mu}} and anti {nu}{sub {mu}} {yields} anti {nu}{sub {mu}} are neutrino oscillation channels through a long baseline. First, we study physics with near detectors and consider the treatment of systematic errors including cross section errors, flux errors, and background uncertainties. We illustrate for which measurements near detectors are required, discuss how many are needed, and what the role of the flux monitoring is. We demonstrate that near detectors are mandatory for the leading atmospheric parameter measurements if the neutrino factory has only one baseline, whereas systematic errors partially cancel if the neutrino factory complex includes the magic baseline. Second, we perform the baseline and energy optimization of the neutrino factory including the latest simulation results from the magnetized iron neutrino detector (MIND). We also consider the impact of {tau} decays, generated by appearance channels {nu}{sub {mu}} {yields} {nu}{sub {tau}} and {nu}{sub e} {yields} {nu}{sub {tau}}, on the discovery reaches of the mass orderings, the leptonic CP violation, and the non-zero {theta}{sub 13}, which we find to be negligible for the considered detector. Third, we make a comparison of a high energy neutrino factory to a low energy neutrino factory and find that they are just two versions of the same experiment optimized for different regions of the parameter space. In addition, we briefly comment on whether it is useful to build the bi-magic baseline at the low energy neutrino factory. Finally, the

Lighting up yeast cell factories by transcription factor-based biosensors

DEFF Research Database (Denmark)

D'ambrosio, Vasil; Jensen, Michael Krogh

2017-01-01

Our ability to rewire cellular metabolism for the sustainable production of chemicals, fuels and therapeutics based on microbial cell factories has advanced rapidly during the last two decades. Especially the speed and precision by which microbial genomes can be engineered now allow for more...... process. For this purpose, there is a need to develop new techniques for screening and selection of best-performing cell factory designs in multiplex. Here we review the current status of the sourcing, design and engineering of biosensors derived from allosterically regulated transcription factors applied...... advanced designs to be implemented and tested. However, compared to the methods developed for engineering cell factories, the methods developed for testing the performance of newly engineered cell factories in high throughput are lagging far behind, which consequently impacts the overall biomanufacturing...

Visible light assisted photoelectrocatalytic degradation of sugarcane factory wastewater by sprayed CZTS thin films

Science.gov (United States)

Hunge, Y. M.; Mahadik, M. A.; Patil, V. L.; Pawar, A. R.; Gadakh, S. R.; Moholkar, A. V.; Patil, P. S.; Bhosale, C. H.

2017-12-01

Highly crystalline Cu2ZnSnS4 (CZTS) thin films have been deposited onto glass and FTO coated glass substrates by simple chemical spray-pyrolysis technique. It is an important material for solar energy conversion through the both photovoltaics and photocatalysis. The effect of substrate temperatures on the physico-chemical properties of the CZTS films is studied. The XRD study shows the formation of single phase CZTS with kesterite structure. FE-SEM analysis reveals nano flakes architecture with pin-hole and crake free surface with more adherent. The film deposited at optimized substrate temperature exhibits optical band gap energy of 1.90 eV, which lies in the visible region of the solar spectrum and useful for photocatalysis application. The photoelectrocatalytic activities of the large surface area (10 × 10 cm2) deposited CZTS thin film photocatalysts were evaluated for the degradation of sugarcane factory wastewater under visible light irradiation. The results show that the CZTS thin film photocatalyst exhibited about 90% degradation of sugar cane factory wastewater. The mineralization of sugarcane factory wastewater is studied by measuring chemical oxygen demand (COD) values.

Study of electroless nickel plating on PerFactoryTM rapid prototype model

OpenAIRE

J.C. Rajaguru; C. Au, M. Duke

2012-01-01

This paper presents an investigation of electroless nickel plating on PerFactoryTM rapid prototype model built on PerFactoryTM R05 material. PerFactoryTM R05 is acrylic based photo sensitive resin. It is a popular material in rapid prototyping using PerFactoryTM method which employs addictive manufacturing technique to build prototypes for visual inspection, assembly etc. Metallization of such a prototype can extend the application envelop of the rapid prototyping technique as they can be use...

RIKEN RI Beam Factory project

Energy Technology Data Exchange (ETDEWEB)

Yano, Yasushige; Goto, Akira; Katayama, Takeshi [Institute of Physical and Chemical Research, Wako, Saitama (Japan)

1997-03-01

The RARF proposes `RIKEN RI Beam Factory` as a next facility-expanding project. The factory makes it the primary aim to provide RI (Radioactive Isotope) beams covering over the whole atomic-mass range with the world-highest intensity in a wide energy range up to several hundreds MeV/nucleon. These RI beams are generated by the fragmentation of high-intensity heavy-ion beams. For the efficient production heavy-ion energies will be boosted up to over 100 MeV/nucleon even for very heavy ions by a K2500-MeV superconducting ring cyclotron serving as a post accelerator of the existing K540-MeV ring cyclotron. A new type of experimental installation called `MUSES` (Multi-USe Experimental Storage rings) will be constructed as well. With MUSES, various types of unique colliding experiments will become possible. (author)

[Development and factorial validity of a moral disengagement in Sport Short Scale].

Science.gov (United States)

Corrion, K; Scoffier, S; Gernigon, C; Cury, F; d'Arripe-Longueville, F

2010-12-01

According to Bandura, individuals are able to violate their personal standards, without self-sanction, by using the psychological operations of moral disengagement. For Bandura et al., moral disengagement is characterized by eight mechanisms belonging to one of the following four groups: (a) reconstructing conduct; (b) reconsideration of negative effects; (c) disqualification of the victim; and (d) obscuring of personal causal agency. Other researchers have measured moral disengagement in various contexts of everyday life using Bandura et al.'s scale and suggested that moral disengagement mechanisms would fall into two or three groups according to context. One context in which moral issues have a major role is sport. Three complementary studies were carried out on a total of 1305 young French adult athletes to develop and validate a Short French Questionnaire of Moral Disengagement in Sport (SFQMDS) and to test its invariance according to gender. STUDY 1: With reference to the existing literature, an initial French version of the SFQDMS was developed. French university students (n=220) then voluntarily completed the questionnaire. The validity of this preliminary version and the clarity of the items were examined and ascertained, and factorial analyses identified 10 items that loaded onto two factors (i.e., projecting fault onto others or sharing of responsibility; minimization of transgression and their consequences). Each factor displayed good internal consistency. STUDY 2: Confirmatory factor analysis (CFA) was conducted using AMOS 7.0 software. The sample included 1021 French university students (M(age)=21.52; SD=2.34). The first analysis of the data from 298 French students suggested that four items should be eliminated. The six-item model was then tested with a CFA of the data from 723 other participants (M(age)=21.51; SD=2.34) and exhibited acceptable fit indices: (χ² [8, 723]=1.54; p>0.09; GFI=0.97; TLI=0.97; CFI=0.97; RMSEA=0.03; RMSEA LO/HI=0

Confirmatory Factor Analysis of Persian Adaptation of Multidimensional Students' Life Satisfaction Scale (MSLSS)

Science.gov (United States)

Hatami, Gissou; Motamed, Niloofar; Ashrafzadeh, Mahshid

2010-01-01

Validity and reliability of Persian adaptation of MSLSS in the 12-18 years, middle and high school students (430 students in grades 6-12 in Bushehr port, Iran) using confirmatory factor analysis by means of LISREL statistical package were checked. Internal consistency reliability estimates (Cronbach's coefficient [alpha]) were all above the…

Measurement invariance of the Belief in a Zero-Sum Game scale across 36 countries.

Science.gov (United States)

Różycka-Tran, Joanna; Jurek, Paweł; Olech, Michał; Piotrowski, Jarosław; Żemojtel-Piotrowska, Magdalena

2017-11-28

In this paper, we examined the psychometric properties of cross-cultural validation and replicability (i.e. measurement invariance) of the Belief in a Zero-Sum Game (BZSG) scale, measuring antagonistic belief about interpersonal relations over scarce resources. The factorial structure of the BZSG scale was investigated in student samples from 36 countries (N = 9907), using separate confirmatory factor analyses (CFAs) for each country. The cross-cultural validation of the scale was based on multigroup confirmatory factor analyses (MGCFA). The results confirmed that the scale had a one-factor structure in all countries, in which configural and metric invariance between countries was confirmed. As a zero-sum belief about social relations perceived as antagonistic, BZSG is an important factor related to, for example, social and international relations, attitudes toward immigrants, or well-being. The paper proposes different uses of the BZSG scale for cross-cultural studies in different fields of psychology: social, political, or economic. © 2017 International Union of Psychological Science.

JINR studies for a Tau-Charm Factory

International Nuclear Information System (INIS)

Chelkov, G.

1994-01-01

This paper touches on work being done a JINR relevant to a proposal for construction of a tau charm factory, and its attendant detector system. A workshop on such a device was held at JINR in 1992, and here the author touches on questions of what one wants to learn about tau particles from such a machine, the charge to the group looking at a detector design for such a facility, the general conclusions of the JINR study, and a status report of work on the JINR Tau Charm Factory project

Particle physics prospects for the KAON factory

International Nuclear Information System (INIS)

Bryman, D.

1989-05-01

The Kaon Factory at TRIUMF will produce beams of kaons, antiprotons, neutrinos and other particles with a hundred-fold increase in intensity over existing machines in the 30 GeV region. This will make possible new high precision experiments designed to test current ideas as well as high sensitivity measurements which could potentially reveal new effects. A sample of particle physics experiments involving rare kaon decays, CP and T violation studies, neutrino properties and reactions and light quark spectroscopy which might take advantage of the new opportunities presented by the Kaon Factory is discussed

PowerFactory applications for power system analysis

CERN Document Server

Gonzalez-Longatt, Francisco

2014-01-01

This book presents a comprehensive set of guidelines and applications of DIgSILENT PowerFactory, an advanced power system simulation software package, for different types of power systems studies. Written by specialists in the field, it combines expertise and years of experience in the use of DIgSILENT PowerFactory with a deep understanding of power systems analysis. These complementary approaches therefore provide a fresh perspective on how to model, simulate and analyse power systems. It presents methodological approaches for modelling of system components, including both classical and non-

Parametric study of a target factory for laser fusion

International Nuclear Information System (INIS)

Sherohman, J.W.; Meier, W.R.

1980-01-01

An analysis of a target factory leading to the derivation of production rate equations has provided the basis for a parametric study. Rate equations describing the production of laser fusion targets have been developed for the purpose of identifying key parameters, attractive production techniques and cost scaling relationships for a commercial target factory

Confirmatory simulation of safety and operational transients in LMFBR systems

International Nuclear Information System (INIS)

Guppy, J.G.; Agrawal, A.K.

1978-01-01

Operational and safety transients that may originate anywhere in an LMFBR system must be adequately simulated to assist in safety evaluation and plant design efforts. This paper describes an advanced thermohydraulic transient code, the Super System Code (SSC), that may be used for confirmatory safety evaluations of plant wide events, such as assurance of adequate decay heat removal capability under natural circulation conditions, and presents results obtained with SSC illustrating the degree of modelling detail present in the code as well as the computing efficiency. (author)

Confirmatory factor analysis of the Sport Emotion Questionnaire in organisational environments.

Science.gov (United States)

Arnold, Rachel; Fletcher, David

2015-01-01

The Sport Emotion Questionnaire (SEQ) (Jones, M. V., Lane, A. M., Bray, S. R., Uphill, M., & Catlin, J. (2005). Development and validation of the SEQ. Journal of Sport and Exercise Psychology, 27, 407-431) was developed and initially validated to assess sport performers' pre-competitive emotions. The purpose of this study was to test the factor structure of the SEQ in a different environment (viz. organisational) and at a different time point (viz. the past month). A further aim was to examine if the SEQ was invariant across different groups of sport performers. A diverse sample of athletes (n = 1277) completed the questionnaire. Fit indices from confirmatory factor analyses provided partial support for the hypothesised measurement model, with equal or better fit demonstrated than evident in initial validation. The comparative fit index values were above acceptable guidelines for all factors at subscale level. Evidence was also found for the invariance of the SEQ across different groups. Overall, the findings support the reliability and validity of the SEQ as a measure of the emotions experienced by sport performers in an organisational environment during the past month.

Pedagogical and Social Climate in School Questionnaire: Factorial Validity and Reliability of the Teacher Version

Science.gov (United States)

Dimitrova, Radosveta; Ferrer-Wreder, Laura; Galanti, Maria Rosaria

2016-01-01

This study evaluated the factorial structure of the Pedagogical and Social Climate in School (PESOC) questionnaire among 307 teachers in Bulgaria. The teacher edition of PESOC consists of 11 scales (i.e., Expectations for Students, Unity Among Teachers, Approach to Students, Basic Assumptions About Students' Ability to Learn, School-Home…

B factory RF system design issues

International Nuclear Information System (INIS)

Zisman, M.S.

1992-01-01

We discuss the issues of relevance to the design of a B factory RF system. First, the general parameter regime is outlined, and the reasons behind certain commonly made choices are indicated. This regime involves high beam currents, and many relatively short bunches. Next, the physics difficulties associated with coupled-bunch instabilities are described briefly. We then describe in general terms the alternative approaches taken by various B factory designers, the motivation for these choices, and the technical issues raised by them. Technical solutions have been proposed for both the room-temperature and the superconducting RF scenarios, and considerable R ampersand D is being carried out worldwide to confirm and optimize these solutions

B factory rf system design issues

International Nuclear Information System (INIS)

Zisman, M.S.

1992-06-01

We discuss the issues of relevance to the design of a B factory RF system. First, the general parameter regime is outlined, and the reasons behind certain commonly made choices are indicated. This regime involves high beam currents, and many relatively short bunches. Next, the physics difficulties associated with coupled-bunch instabilities are described briefly. We then describe in general terms the alternative approaches taken by various B factory designers, the motivation for these choices, and the technical issues raised by them. Technical solutions have been proposed for both the room-temperature and the superconducting RF scenarios, and considerable R ampersand D is being carried out worldwide to confirm and optimize these solutions

Validation of the Spanish version of the Drive for Muscularity Scale (DMS) among males: Confirmatory factor analysis.

Science.gov (United States)

Sepulveda, Ana R; Parks, Melissa; de Pellegrin, Yolanda; Anastasiadou, Dimitra; Blanco, Miriam

2016-04-01

Drive for Muscularity (DM) has been shown to be a relevant construct for measuring and understanding male body image. For this reason, it is important to have reliable and valid instruments with which to measure DM, and to date no such instruments exist in Spain. This study analyzes the psychometric and structural properties of the Drive for Muscularity Scale (DMS) in a sample of Spanish adolescent males (N=212), with the aim of studying the structural validity of the scale by using a confirmatory factor analysis (CFA), as well as analyzing the internal consistency and construct (convergent and discriminant) and concurrent validity of the instrument. After testing three models, results indicated that the best structure was a two-dimensional model, with the factors of muscularity-oriented body image (MBI) and muscularity behavior (MB). The scale showed good internal consistency (α=.90) and adequate construct validity. Furthermore, significant associations were found between DM and increased difficulties in emotional regulation (rho=.37) and low self-esteem (rho=-.19). Findings suggest that the two-factor structure may be used when assessing drive for muscularity among adolescent males in Spain. Copyright © 2016 Elsevier Ltd. All rights reserved.

Manufacturing data analytics using a virtual factory representation.

Science.gov (United States)

Jain, Sanjay; Shao, Guodong; Shin, Seung-Jun

2017-01-01

Large manufacturers have been using simulation to support decision-making for design and production. However, with the advancement of technologies and the emergence of big data, simulation can be utilised to perform and support data analytics for associated performance gains. This requires not only significant model development expertise, but also huge data collection and analysis efforts. This paper presents an approach within the frameworks of Design Science Research Methodology and prototyping to address the challenge of increasing the use of modelling, simulation and data analytics in manufacturing via reduction of the development effort. The use of manufacturing simulation models is presented as data analytics applications themselves and for supporting other data analytics applications by serving as data generators and as a tool for validation. The virtual factory concept is presented as the vehicle for manufacturing modelling and simulation. Virtual factory goes beyond traditional simulation models of factories to include multi-resolution modelling capabilities and thus allowing analysis at varying levels of detail. A path is proposed for implementation of the virtual factory concept that builds on developments in technologies and standards. A virtual machine prototype is provided as a demonstration of the use of a virtual representation for manufacturing data analytics.

How is flow experienced and by whom? Testing flow among occupations.

Science.gov (United States)

Llorens, Susana; Salanova, Marisa; Rodríguez, Alma M

2013-04-01

The aims of this paper are to test (1) the factorial structure of the frequency of flow experience at work; (2) the flow analysis model in work settings by differentiating the frequency of flow and the frequency of its prerequisites; and (3) whether there are significant differences in the frequency of flow experience depending on the occupation. A retrospective study among 957 employees (474 tile workers and 483 secondary school teachers) using multigroup confirmatory factorial analyses and multiple analyses of variance suggested that on the basis of the flow analysis model in work settings, (1) the frequency of flow experience has a two-factor structure (enjoyment and absorption); (2) the frequency of flow experience at work is produced when both challenge and skills are high and balanced; and (3) secondary school teachers experience flow more frequently than tile workers. Copyright © 2012 John Wiley & Sons, Ltd.

Quinn’s Leadership Roles: A Confirmatory Factor Analysis Study in Portuguese Health Services

Directory of Open Access Journals (Sweden)

Pedro Parreira

2015-08-01

Full Text Available Purpose: To assess the psychometric properties of Quinn’s leadership questionnaire (CFV questionnaire; 1988 in Portuguese health services. Design: Cross-sectional study, using Quinn’s leadership questionnaire, administered to registered nurses and physicians in Portuguese health services (N = 687. Method: Self-administered survey applied to two samples. In the first sample (convenience; N = 249 Portuguese health professionals, exploratory factor and reliability analyses were performed to the CFV questionnaire. In the second sample (stratified; N = 50 surgical units of 33 Portuguese hospitals, confirmatory factor analyses were performed using LISREL 8.80. Findings: In the first sample, an eight-factor solution emerged accounting for 65.46% of the total variance, in an interpretable factor structure (loadings> .50, with Cronbach’s α greater than .79. This factor structure, replicated in the second sample, showed reasonable goodness-of-fit of the model to each of the leadership roles, that is, to the eight quadrants and global model. Overall, the models showed nomological validity, with scores between good and acceptable (.235 < x2/df < 2.055 and .00 < RMSEA < .077. Conclusions: Quinn’s leadership questionnaire showed good reliability and validity for the eight leadership roles, proving to be suitable for use in health care/hospital settings.

Optimization of MCM-48 synthesis using factorial design

Energy Technology Data Exchange (ETDEWEB)

Nascimento, A.R. do; Medeiros, R.L.B. de A.; Melo, M. A. de F.; Melo, D.M. de A. [Universitdade Federal do Rio Grande do Norte (UFRN), Natal (Brazil); Souza, M.J.B. de, E-mail: ale3ufs@yahoo.com.br [Universidade Federal de Sergipe (UFS), Sao Cristovao (Brazil)

2016-10-15

MCM-48 mesoporous materials were hydrothermally synthesized according to the 2{sup 2} factorial design by varying the crystallization time and temperature of the synthesis gel, and characterized by means of X-ray diffraction analysis and adsorption of N{sub 2} . In the crystallization temperature and time conditions used, specific areas between 924 to 1102 m{sup 2}.g{sup -1}, pore volumes between 0.015 to 0.087 cm{sup 3}.g{sup -1} and pore diameters between 3.2 to 4.0 nm were obtained. It was observed that for the syntheses performed at high temperature, the crystallization time should be reduced so that the material structure is formed. (author)

Análisis factorial confirmatorio de la Escala de Estilos de Crianza de Steinberg: validez preliminar de constructo

Directory of Open Access Journals (Sweden)

César Merino Soto

2013-09-01

Full Text Available Se estudió la validez de constructo y confiabilidad interna de la Escala de Estilos de Crianza de L. Steinberg que se administró a una muestra de 224 adolescentes entre 11 y 19 años de un colegio público en Lima. Mediante el análisis factorial confirmatorio de grupo múltiple, la estructura de tres subescalas (Compromiso, Autonomía Psicológica y Control Conductual/Supervisión se mantuvo en general estable, aunque la agrupación teórica de los ítems tendió a estar influenciada por la distribución de los ítems. La confiabilidad alfa para las subescalas solo alcanzó niveles marginales de aceptación y se reconoció el probable impacto del error de medición aleatorio. Los resultados muestran que el instrumento utilizado es una herramienta potencial para la investigación, pero estos hallazgos son preliminares y se requieren estudios adicionales para evaluar la generalización del análisis efectuado. The present study tried to find evidences of construct validity and internal reliability for the Parenting Styles Scale of L. Steinberg. The instrument was applied in a sample of 224 adolescents from 11 to 19 years old from a public school of Lima. With a strategy of multiple group confirmatory factor analysis, the three-subscale structure (Commitment, Psychological Autonomy and Behavior Control/Supervision was in general stable, although the theoretical grouping of the items was influenced by the distribution of the item. The alpha reliability reached marginal levels and the probable impact of the random error was recognized. Results show that this instrument is a potential tool for research, but these findings are preliminary and additional studies are required to evaluate the generalization of the analysis.

Review of Hosein Aabad Sugar Factory (HASF) Wastewater and ...

African Journals Online (AJOL)

Sugar industry is one of the largest industries in the world. Hosein Abad sugar factory (HASF) is located in Hamadan province of Iran. The aim of this research was to evaluate the quality and quantity of wastewater of the said factory and to estimate the pollution load and its emission factor as prerequisite of the management ...

A Graphical Interactive Simulation Environment for Production Planning in Bacon Factories

DEFF Research Database (Denmark)

Nielsen, Kirsten Mølgaard; Nielsen, Jens Frederik Dalsgaard

1994-01-01

The paper describes a graphical interactive simulation tool for production planning in bacon factories........The paper describes a graphical interactive simulation tool for production planning in bacon factories.....

Rapid prototyping 3D virtual world interfaces within a virtual factory environment

Science.gov (United States)

Kosta, Charles Paul; Krolak, Patrick D.

1993-01-01

On-going work into user requirements analysis using CLIPS (NASA/JSC) expert systems as an intelligent event simulator has led to research into three-dimensional (3D) interfaces. Previous work involved CLIPS and two-dimensional (2D) models. Integral to this work was the development of the University of Massachusetts Lowell parallel version of CLIPS, called PCLIPS. This allowed us to create both a Software Bus and a group problem-solving environment for expert systems development. By shifting the PCLIPS paradigm to use the VEOS messaging protocol we have merged VEOS (HlTL/Seattle) and CLIPS into a distributed virtual worlds prototyping environment (VCLIPS). VCLIPS uses the VEOS protocol layer to allow multiple experts to cooperate on a single problem. We have begun to look at the control of a virtual factory. In the virtual factory there are actors and objects as found in our Lincoln Logs Factory of the Future project. In this artificial reality architecture there are three VCLIPS entities in action. One entity is responsible for display and user events in the 3D virtual world. Another is responsible for either simulating the virtual factory or communicating with the real factory. The third is a user interface expert. The interface expert maps user input levels, within the current prototype, to control information for the factory. The interface to the virtual factory is based on a camera paradigm. The graphics subsystem generates camera views of the factory on standard X-Window displays. The camera allows for view control and object control. Control or the factory is accomplished by the user reaching into the camera views to perform object interactions. All communication between the separate CLIPS expert systems is done through VEOS.

Baby Factories in Nigeria: Starting the Discussion Toward a National Prevention Policy.

Science.gov (United States)

Makinde, Olusesan Ayodeji; Olaleye, Olalekan; Makinde, Olufunmbi Olukemi; Huntley, Svetlana S; Brown, Brandon

2017-01-01

Baby factories and baby harvesting are relatively new terms that involve breeding, trafficking, and abuse of infants and their biological mothers. Since it was first described in a United Nations Educational, Scientific and Cultural Organization report in Nigeria in 2006, several more baby factories have been discovered over the years. Infertile women are noted to be major patrons of these baby factories due to the stigmatization of childless couples in Southern Nigeria and issues around cultural acceptability of surrogacy and adoption. These practices have contributed to the growth in the industry which results in physical, psychological, and sexual violence to the victims. Tackling baby factories will involve a multifaceted approach that includes advocacy and enacting of legislation barring baby factories and infant trafficking and harsh consequences for their patrons. Also, programs to educate young girls on preventing unwanted pregnancies are needed. Methods of improving awareness and acceptability of adoption and surrogacy and reducing the administrative and legal bottlenecks associated with these options for infertile couples should be explored to diminish the importance of baby factories. © The Author(s) 2015.

Confirmatory Tests for the Diagnosis of Primary Aldosteronism: A Prospective Diagnostic Accuracy Study.

Science.gov (United States)

Song, Ying; Yang, Shumin; He, Wenwen; Hu, Jinbo; Cheng, Qingfeng; Wang, Yue; Luo, Ting; Ma, Linqiang; Zhen, Qianna; Zhang, Suhua; Mei, Mei; Wang, Zhihong; Qing, Hua; Bruemmer, Dennis; Peng, Bin; Li, Qifu

2018-01-01

The diagnosis of primary aldosteronism typically requires at least one confirmatory test. The fludrocortisone suppression test is generally accepted as a reliable confirmatory test, but it is cumbersome. Evidence from accuracy studies of the saline infusion test (SIT) and the captopril challenge test (CCT) has provided conflicting results. This prospective study aimed to evaluate the diagnostic accuracy of the SIT and CCT using fludrocortisone suppression test as the reference standard. One hundred thirty-five patients diagnosed with primary aldosteronism and 101 patients diagnosed with essential hypertension who completed the 3 confirmatory tests were included for the diagnostic accuracy analysis. The areas under the receiver-operator characteristics curves of the CCT and SIT were 0.96 (95% confidence interval [CI], 0.92-0.98) and 0.96 (95% CI, 0.92-0.98), respectively, using post-test plasma aldosterone concentration (PAC) for diagnosis. However, the areas under the receiver-operator characteristics curves of the CCT decreased to 0.71 (95% CI, 0.65-0.77) when the PAC suppression percentage was used to diagnose primary aldosteronism. The optimal cutoff of PAC post-CCT was set at 11 ng/dL, resulting in a sensitivity of 0.90 (95% CI, 0.84-0.95) and a specificity of 0.90 (95% CI, 0.83-0.95), which were not significantly different from those of SIT (with PAC post-SIT set at 8 ng/dL, sensitivity: 0.85 [95% CI, 0.78-0.91], P =0.192; specificity: 0.92 [95% CI, 0.85-0.97], P =0.551). In conclusion, both CCT and SIT are accurate alternatives to the more complex fludrocortisone suppression test. Because CCT is safe and much easier to perform, it may serve as a more feasible alternative. When interpreting the results of CCT, PAC post-CCT is highly recommended. © 2017 American Heart Association, Inc.

Cross-validation of the factorial structure of the Neighborhood Environment Walkability Scale (NEWS and its abbreviated form (NEWS-A

Directory of Open Access Journals (Sweden)

Cerin Ester

2009-06-01

Full Text Available Abstract Background The Neighborhood Environment Walkability Scale (NEWS and its abbreviated form (NEWS-A assess perceived environmental attributes believed to influence physical activity. A multilevel confirmatory factor analysis (MCFA conducted on a sample from Seattle, WA showed that, at the respondent level, the factor-analyzable items of the NEWS and NEWS-A measured 11 and 10 constructs of perceived neighborhood environment, respectively. At the census blockgroup (used by the US Census Bureau as a subunit of census tracts level, the MCFA yielded five factors for both NEWS and NEWS-A. The aim of this study was to cross-validate the individual- and blockgroup-level measurement models of the NEWS and NEWS-A in a geographical location and population different from those used in the original validation study. Methods A sample of 912 adults was recruited from 16 selected neighborhoods (116 census blockgroups in the Baltimore, MD region. Neighborhoods were stratified according to their socio-economic status and transport-related walkability level measured using Geographic Information Systems. Participants self-completed the NEWS. MCFA was used to cross-validate the individual- and blockgroup-level measurement models of the NEWS and NEWS-A. Results The data provided sufficient support for the factorial validity of the original individual-level measurement models, which consisted of 11 (NEWS and 10 (NEWS-A correlated factors. The original blockgroup-level measurement model of the NEWS and NEWS-A showed poor fit to the data and required substantial modifications. These included the combining of aspects of building aesthetics with safety from crime into one factor; the separation of natural aesthetics and building aesthetics into two factors; and for the NEWS-A, the separation of presence of sidewalks/walking routes from other infrastructure for walking. Conclusion This study provided support for the generalizability of the individual

BERKELEY/STANFORD: B factory plans

International Nuclear Information System (INIS)

Anon.

1991-01-01

For the past several years, accelerator physicists at Lawrence Berkeley Laboratory (LBL) and the Stanford Linear Accelerator Center (SLAC) have been involved in the design of an Asymmetric B Factory to be sited in the tunnel of the PEP electron-positron collider at SLAC

Final Report - Independent Confirmatory Survey Summary and Results for the Hematite Decommissioning Project, Festus, Missouri

International Nuclear Information System (INIS)

Bailey, E.N.

2009-01-01

The objectives of the confirmatory surveys were to provide independent contractor field data reviews and to generate independent radiological data for use by the NRC in evaluating the adequacy and accuracy of the licensee's procedures and survey results.

Strategic analysis of a factory built home opportunity in Western Canada

OpenAIRE

Henderson, Stephen Gary

2006-01-01

A strategic analysis was completed to determine the feasibility of initiating a factory-built home manufacturing facility in Western Canada. We completed an industry analysis, internal analysis, an opportunity analysis and provide a recommendation on how to proceed. The results indicate a factory built facility is economically feasible if a market of 60 houses per year can be established. The competitive advantages of factory built homes over on-site homes indicate a better quality home can b...

Role of prostate specific antigen and immediate confirmatory biopsy in predicting progression during active surveillance for low risk prostate cancer.

Science.gov (United States)

Adamy, Ari; Yee, David S; Matsushita, Kazuhito; Maschino, Alexandra; Cronin, Angel; Vickers, Andrew; Guillonneau, Bertrand; Scardino, Peter T; Eastham, James A

2011-02-01

We evaluated predictors of progression after starting active surveillance, especially the role of prostate specific antigen and immediate confirmatory prostate biopsy. A total of 238 men with prostate cancer met active surveillance eligibility criteria and were analyzed for progression with time. Cox proportional hazards regression was used to evaluate predictors of progression. Progression was evaluated using 2 definitions, including no longer meeting 1) full and 2) modified criteria, excluding prostate specific antigen greater than 10 ng/ml as a criterion. Using full criteria 61 patients progressed during followup. The 2 and 5-year progression-free probability was 80% and 60%, respectively. With prostate specific antigen included in progression criteria prostate specific antigen at confirmatory biopsy (HR 1.29, 95% CI 1.14-1.46, p <0.0005) and positive confirmatory biopsy (HR 1.75, 95% CI 1.01-3.04, p = 0.047) were independent predictors of progression. Of the 61 cases 34 failed due to increased prostate specific antigen, including only 5 with subsequent progression by biopsy criteria. When prostate specific antigen was excluded from progression criteria, only 32 cases progressed, and 2 and 5-year progression-free probability was 91% and 76%, respectively. Using modified criteria as an end point positive confirmatory biopsy was the only independent predictor of progression (HR 3.16, 95% CI 1.41-7.09, p = 0.005). Active surveillance is feasible in patients with low risk prostate cancer and most patients show little evidence of progression within 5 years. There is no clear justification for treating patients in whom prostate specific antigen increases above 10 ng/ml in the absence of other indications of tumor progression. Patients considering active surveillance should undergo confirmatory biopsy to better assess the risk of progression. Copyright © 2011 American Urological Association Education and Research, Inc. Published by Elsevier Inc. All rights reserved.

Evaluating empathy in Colombian ex-combatants: Examination of the internal structure of the Interpersonal Reactivity Index (IRI) in Spanish.

Science.gov (United States)

Garcia-Barrera, Mauricio A; Karr, Justin E; Trujillo-Orrego, Natalia; Trujillo-Orrego, Sandra; Pineda, David A

2017-01-01

The Republic of Colombia has a long-standing history of internal armed conflict, further complicated by the ideological assumptions underlying their war. In recent years, its government designed the Program for Reincorporation to Civilian Life (Programa para la Reincorporación a la Vida Civil, PRVC), aiming demobilization of thousands of insurgents who were involved in guerilla and paramilitary forces. One PRVC goal involves the psychological characterization of its reincorporated members, aiming the informed design of effective and efficacious interventions to improve their adjustment. We are interested in the examination of empathy in this population. Empathy refers to the ability to predict, understand, and experience other's feelings. Empathy appears to have an effect on level of aggressive behavior. The Interpersonal Reactivity Index (IRI; Davis, 1980, 1983) is a well-established 28-item self-report tool for the assessment of empathy, including 4 scales: Perspective Taking, Fantasy, Empathic Concern, and Personal Distress. Versions in Spanish were validated in Spain and Chile, but no norms for Colombians exist. We examined the factorial structure of the IRI in a sample of 548 (83.4% males) members of the PRVC. Ten items with low factor loadings were eliminated following a series of confirmatory factor analyses (CFA). The final 4-factor model (Model 2) reached an acceptable fit (e.g., CFI = .898). A second-order CFA demonstrated that empathic concern correlated too high with a common "empathy" latent factor. With these results at hand, our 18-item IRI version in Spanish achieved a factorial structure comparable to that previously validated for Spanish speakers from other countries. (PsycINFO Database Record (c) 2016 APA, all rights reserved).

Factory Gate Pricing: An Analysis of the Dutch Retail Distribution

NARCIS (Netherlands)

H.M. le Blanc; F. Cruijssen (Frans); H.A. Fleuren; M.B.M. de Koster (René)

2004-01-01

textabstractFactory Gate Pricing (FGP) is a relatively new phenomenon in retail distribution. Under FGP, products are no longer delivered at the retailer distribution center, but collected by the retailer at the factory gates of the suppliers. Owing to both the asymmetry in the distribution networks

Factory Gate Pricing : An Analysis of the Dutch Retail Distribution

NARCIS (Netherlands)

Le Blanc, H.M.; Cruijssen, F.C.A.M.; Fleuren, H.A.; de Koster, M.B.M.

2004-01-01

Factory Gate Pricing (FGP) is a relatively new phenomenon in retail distribution.Under FGP, products are no longer delivered at the retailer distribution center, but collected by the retailer at the factory gates of the suppliers.Owing to both the asymmetry in the distribution networks (the supplier

Physics at a future Neutrino Factory and super-beam facility

NARCIS (Netherlands)

Bandyopadhyay, A.; Choubey, S.; Gandhi, R.; Goswami, S.; Roberts, B. L.; Bouchez, J.; Antoniadis, I.; Ellis, J.; Giudice, G. F.; Schwetz, T.; Umasankar, S.; Karagiorgi, G.; Aguilar-Arevalo, A.; Conrad, J. M.; Shaevitz, M. H.; Pascoli, S.; Geer, S.; Campagne, J. E.; Rolinec, M.; Blondel, A.; Campanelli, M.; Kopp, J.; Lindner, M.; Peltoniemi, J.; Dornan, P. J.; Long, K.; Matsushita, T.; Rogers, C.; Uchida, Y.; Dracos, M.; Whisnant, K.; Casper, D.; Chen, Mu-Chun; Popov, B.; Aysto, J.; Marfatia, D.; Okada, Y.; Sugiyama, H.; Jungmann, K.; Lesgourgues, J.; Zisman, M.; Tortola, M. A.; Friedland, A.; Davidson, S.; Antusch, S.; Biggio, C.; Donini, A.; Fernandez-Martinez, E.; Gavela, B.; Maltoni, M.

2009-01-01

The conclusions of the Physics Working Group of the International Scoping Study of a future Neutrino Factory and super-beam facility (the ISS) are presented. The ISS was carried out by the international community between NuFact05, (the 7th International Workshop on Neutrino Factories and

Advanced Envelope Research for Factory Built Housing, Phase 3. Whole-House Prototyping

Energy Technology Data Exchange (ETDEWEB)

Levy, E. [Advanced Residential Integrated Energy Solutions (ARIES), New York, NY (United States); Mullens, M. [Advanced Residential Integrated Energy Solutions (ARIES), New York, NY (United States); Rath, P. [Advanced Residential Integrated Energy Solutions (ARIES), New York, NY (United States)

2014-04-01

The Advanced Envelope Research effort will provide factory homebuilders with high performance, cost-effective envelope designs that can be effectively integrated into the plant production process while meeting the thermal requirements of the 2012 IECC standards. This work is part of a multiphase effort. Phase 1 identified seven envelope technologies and provided a preliminary assessment of three methods for building high performance walls. Phase 2 focused on developing viable product designs, manufacturing strategies, addressing code and structural issues, and cost analysis of the three selected options. An industry advisory committee helped narrow the research focus to perfecting a stud wall design with exterior continuous insulation (CI). This report describes Phase 3, which was completed in two stages and continued the design development effort, exploring and evaluating a range or methods for applying CI to factory built homes. The scope also included material selection, manufacturing and cost analysis, and prototyping and testing. During this phase, a home was built with CI, evaluated, and placed in service. The experience of building a mock up wall section with CI and then constructing on line a prototype home resolved important concerns about how to integrate the material into the production process. First steps were taken toward finding least expensive approaches for incorporating CI in standard factory building practices and a preliminary assessment suggested that even at this early stage the technology is attractive when viewed from a life cycle cost perspective.

Neutrino factory plans at CERN

CERN Document Server

Riche, J A

2001-01-01

The considerable interest raised by the discovery of neutrino oscillations and recent progress in studies of muon colliders has triggered interest in considering a neutrino factory at CERN. This paper explains the reference scenario, indicates the other possible choices and mentions the R&D that are foreseen.

Physics at a future Neutrino Factory and super-beam facility

CERN Document Server

Bandyopadhyay, A; Gandhi, R; Goswami, S; Roberts, B L; Bouchez, J; Antoniadis, I; Ellis, J; Giudice, G F; Schwetz, T; Umansankar, S; Karagiorgi, G; Aguilar-Arevalo, A; Conrad, J M; Shaevitz, M H; Pascoli, Silvia; Geer, S; Rolinec, M; Blondel, A; Campanelli, M; Kopp, J; Lindner, M; Peltoniemi, J; Dornan, P J; Long, K; Matsushita, T; Rogers, C; Uchida, Y; Dracos, M; Whisnant, K; Casper, D; Chen, Mu-Chun; Popov, B; Aysto, J; Marfatia, D; Okada, Y; Sugiyama, H; Jungmann, K; Lesgourgues, J; Murayama, France H; Zisman, M; Tortola, M A; Friedland, A; Antusch, S; Biggio, C; Donini, A; Fernandez-Martinez, E; Gavela, B; Maltoni, M; Lopez-Pavon, J; Rigolin, S; Mondal, N; Palladino, V; Filthaut, F; Albright, C; de Gouvea, A; Kuno, Y; Nagashima, Y; Mezzetoo, M; Lola, S; Langacker, P; Baldini, A; Nunokawa, H; Meloni, D; Diaz, M; King, S F; Zuber, K; Akeroyd, A G; Grossman, Y; Farzan, Y; Tobe, K; Aoki, Mayumi; Kitazawa, N; Yasuda, O; Petcov, S; Romanino, A; Chimenti, P; Vacchi, A; Smirnov, A Yu; Couce, Italy E; Gomez-Cadenas, J J; Hernandez, P; Sorel, M; Valle, J W F; Harrison, P F; Lundardini, C; Nelson, J K; Barger, V; Everett, L; Huber, P; Winter, W; Fetscher, W; van der Schaaf, A

2009-01-01

The conclusions of the Physics Working Group of the international scoping study of a future Neutrino Factory and super-beam facility (the ISS) are presented. The ISS was carried by the international community between NuFact05, (the 7th International Workshop on Neutrino Factories and Superbeams, Laboratori Nazionali di Frascati, Rome, June 21-26, 2005) and NuFact06 (Ivine, California, 24{30 August 2006). The physics case for an extensive experimental programme to understand the properties of the neutrino is presented and the role of high-precision measurements of neutrino oscillations within this programme is discussed in detail. The performance of second generation super-beam experiments, beta-beam facilities, and the Neutrino Factory are evaluated and a quantitative comparison of the discovery potential of the three classes of facility is presented. High-precision studies of the properties of the muon are complementary to the study of neutrino oscillations. The Neutrino Factory has the potential to provide ...

Confirmatory factor analysis of the female sexual function index.

Science.gov (United States)

Opperman, Emily A; Benson, Lindsay E; Milhausen, Robin R

2013-01-01

The Female Sexual Functioning Index (Rosen et al., 2000 ) was designed to assess the key dimensions of female sexual functioning using six domains: desire, arousal, lubrication, orgasm, satisfaction, and pain. A full-scale score was proposed to represent women's overall sexual function. The fifth revision to the Diagnostic and Statistical Manual (DSM) is currently underway and includes a proposal to combine desire and arousal problems. The objective of this article was to evaluate and compare four models of the Female Sexual Functioning Index: (a) single-factor model, (b) six-factor model, (c) second-order factor model, and (4) five-factor model combining the desire and arousal subscales. Cross-sectional and observational data from 85 women were used to conduct a confirmatory factor analysis on the Female Sexual Functioning Index. Local and global goodness-of-fit measures, the chi-square test of differences, squared multiple correlations, and regression weights were used. The single-factor model fit was not acceptable. The original six-factor model was confirmed, and good model fit was found for the second-order and five-factor models. Delta chi-square tests of differences supported best fit for the six-factor model validating usage of the six domains. However, when revisions are made to the DSM-5, the Female Sexual Functioning Index can adapt to reflect these changes and remain a valid assessment tool for women's sexual functioning, as the five-factor structure was also supported.

Development and Validation of Videogame Addiction Scale for Children (VASC).

Science.gov (United States)

Yılmaz, Eyüp; Griffiths, Mark D; Kan, Adnan

2017-01-01

The aim of the present study was to develop a valid and reliable Videogame Addiction Scale for Children (VASC). The data were derived from 780 children who completed the Videogame Addiction Scale (405 girls and 375 boys; 48.1% ranging in age from 9 to 12 years). The sample was randomly split into two different sub-samples (sample 1, n  = 400; sample 2, n  = 380). Sample 1 was used to perform exploratory factor analysis (EFA) to define the factorial structure of VASC. As a result of EFA, a four-factor structure comprising 21 items was obtained and explained 55% of the total variance (the four factors being "self-control," "reward/reinforcement," "problems," and "involvement"). The internal consistency reliability of VASC has found 0.89. Confirmatory factor analysis (CFA) was performed to confirm the factorial structure obtained by EFA in the remaining half of sample ( n  = 390). The obtained fit indices from the CFA confirmed the structure of the EFA. The 21-item VASC has good psychometric properties that can be used among Turkish schoolchildren populations.

Handbook factory planning and design

CERN Document Server

Wiendahl, Hans-Peter; Nyhuis, Peter

2015-01-01

This handbook introduces a methodical approach and pragmatic concept for the planning and design of changeable factories that act in strategic alliances to supply the ever-changing needs of the global market. In the first part, the change drivers of manufacturing enterprises and the resulting new challenges are considered in detail with focus on an appropriate change potential. The second part concerns the design of the production facilities and systems on the factory levels work place, section, building and site under functional, organisational, architectural and strategic aspects keeping in mind the environmental, health and safety aspects including corporate social responsibility. The third part is dedicated to the planning and design method that is based on a synergetic interaction of process and space. The accompanying project management of the planning and construction phase and the facility management for the effective utilization of the built premises close the book. -        Concise overview o...

Factorial moment and fractal analysis of γ families

International Nuclear Information System (INIS)

Kalmakhelidze, M.Eh.; Roinishvili, N.N.; Svanidze, M.S.; Khizanishvili, L.A.; Chadranyan, L.Kh.

1997-01-01

Factorial and fractal methods were applied to nuclear-electromagnetic cascades in the atmosphere (γ families) to find sensitivity of these methods to multiparticle fluctuations in γ families. Averaged parameters of factorial and fractal methods of the real families were compared with the same quantities for the statistical set of random families. The correlations between the same parameters for families divided into sectors and into rings are studied. The correlations between different parameters for the same families divided into sectors are investigated

A factorial experiment on image quality and radiation dose

International Nuclear Information System (INIS)

Norrman, E.; Persliden, J.

2005-01-01

To find if factorial experiments can be used in the optimisation of diagnostic imaging, a factorial experiment was performed to investigate some of the factors that influence image quality, kerma area product (KAP) and effective dose (E). In a factorial experiment the factors are varied together instead of one at a time, making it possible to discover interactions between the factors as well as major effects. The factors studied were tube potential, tube loading, focus size and filtration. Each factor was set to two levels (low and high). The influence of the factors on the response variables (image quality, KAP and E) was studied using a direct digital detector. The major effects of each factor on the response variables were estimated as well as the interaction effects between factors. The image quality, KAP and E were mainly influenced by tube loading, tube potential and filtration. There were some active interactions, for example, between tube potential and filtration and between tube loading and filtration. The study shows that factorial experiments can be used to predict the influence of various parameters on image quality and radiation dose. (authors)

Automation in the factory

Energy Technology Data Exchange (ETDEWEB)

Hatvany, J

1984-05-01

There are now about 100000 computers in the manufacturing plants of the world, but the thirty-year old dream of the computer-controlled factory is only now beginning to materialize. With the advent of advanced microprocessor technology of distributed systems based on local area networking and of supervisory and diagnostic systems utilizing artificial intelligence techniques, computer-integrated manufacturing (CIM) has today become a realistic aim. 6 references.

The structure of post-traumatic stress disorder and complex post-traumatic stress disorder amongst West Papuan refugees.

Science.gov (United States)

Tay, Alvin Kuowei; Rees, Susan; Chen, Jack; Kareth, Moses; Silove, Derrick

2015-05-07

The validity of applying the construct of post-traumatic stress disorder (PTSD) across cultures has been the subject of contention. Although PTSD symptoms have been identified across multiple cultures, questions remain whether the constellation represents a coherent construct with an interpretable factor structure across diverse populations, especially those naïve to western notions of mental disorder. An important additional question is whether a constellation of Complex-PTSD (C-PTSD) can be identified and if so, whether there are distinctions between that disorder and core PTSD in patterns of antecedent traumatic events. Our study amongst West Papuan refugees in Papua New Guinea (PNG) aimed to examine the factorial structure of PTSD based on the DSM-IV, DSM-5, ICD-10 and ICD-11 definitions, and C-PTSD according to proposed ICD-11 criteria. We also investigated domains of traumatic events (TEs) and broader psychosocial effects of conflict (sense of safety and injustice) associated with the factorial structures identified. Culturally adapted measures were applied to assess exposure to conflict-related traumatic events (TEs), refugees' sense of safety and justice, and symptoms of PTSD and C-PTSD amongst 230 West Papuan refugees residing in Port Morseby, PNG. Confirmatory factor analysis (CFA) supported a unitary construct of both ICD-10 and ICD-11 PTSD, comprising the conventional symptom subdomains of intrusion, avoidance, and hyperarousal. In contrast, CFA did not identify a unitary construct underlying C-PTSD. The interaction of witnessing murders and sense of injustice was associated with both the intrusion and avoidance domains of PTSD, but not with the unique symptom clusters characterizing C-PTSD. Our findings support the ICD PTSD construct and its three-factor structure in this transcultural refugee population. Traumatic experiences of witnessing murder associated with a sense of injustice were specifically related to the intrusion and avoidance domains of

Self-concept in preadolescence: A brief version of AF5 scale

Directory of Open Access Journals (Sweden)

Pau García-Grau

2014-06-01

Full Text Available The purpose of this study was to analyze the psychometric properties of a brief version of the AF5 questionnaire (García & Musitu, 2001 using exploratory and confirmatory techniques on a preadolescent population in the Valencian community (Spain. The sample was made up of 541 participants between 10 and 12 years old, 55.1% (298 boys and 44.9% (243 girls. After observing the results of different reliability and validity analyses (exploratory factor analysis (EFA and confirmatory factor analysis (CFA, it was found that the reduced scale consisting of 20 items showed a similar reliability and validity to the original scale. The factorial structure also fits that of the original model established a priori. According to the results of the study, the use of this diagnostic tool with Spanish children seems justified.

Assessment of Work Zone Noise Levels at a Cement Factory in ...

African Journals Online (AJOL)

Assessment of Work Zone Noise Levels at a Cement Factory in Tanga, Tanzania. ... measured in most production sections exceeded the allowed limit value of 85 ... Keywords: Noise levels, Noise exposure, Cement factory, Survey, Tanzania ...

An asymmetric B factory based on PEP

International Nuclear Information System (INIS)

1991-02-01

In this report we describe a design for a high-luminosity Asymmetric B Factory to be built in the PEP tunnel on the SLAC site. This proposal, a collaborative effort SLAC, LBL, and LLNL, is the culmination of more than two years of effort aimed at the design and construction of an asymmetric e + e - collider capable of achieving a luminosity of L = 3 x 10 33 cm -2 s -1 . The configuration adopted utilizes two storage rings, and electron ring operating at 9 GeV and a positron ring at 3.1 GeV, each with a circumference of 2200 m. The high-energy ring is an upgrade of the PEP storage ring at SLAC; all PEP magnets and most power supplies will be reused. The upgrade consists primarily of replacing the PEP vacuum chamber and RF system with newly designed versions optimized for the high-current environment of the B Factory. The low-energy ring will be newly constructed and will be situated atop the high-energy ring in the PEP tunnel. Utilities already installed in the PEP tunnel are largely sufficient to operate the two B Factory storage rings

A Review of "Infinity Factory."

Science.gov (United States)

National Council of Teachers of Mathematics, Inc., Reston, VA.

Following a discussion of the historical background of the TV series "Infinity Factory," the goals of the television project are listed. A general description of the television series, an evaluation of the entertainment value, and an evaluation of children's attitude change are briefly presented. The program's presentation of mathematics…

The footwear factory's assembly sector: opposing organizational structure and quality from the ergonomic work analysis.

Science.gov (United States)

Silva, Kláudia M M N; Coelho, Bernardo G P; Junior, Josemir V S; Faria, Luiz F M; Dutra, Ludmila; Alvarenga, Marília; Roggini, Renan; Echternach, Eliza Helena de Oliveira

2012-01-01

Data from 2006 indicated that Brazilian footwear leather industry was composed of approximately 9,488 formally registered establishments, considering the leather industry, footwear and leather goods. It was responsible for 211,582 people employed. However, in spite of having many employees, this kind of organization found several problems when analyzed from the ergonomics view. With this premise, then, in order to identify bottlenecks and other engineering problems that could cause discomfort and motivation lack among workers, leading directly to the loss of the product quality, the assembly sector of women's shoes factory was characterized.

Effect of factory effluents on physiological and biochemical contents of Gossypium hirsutum l.

Science.gov (United States)

Muthusamy, A; Jayabalan, N

2001-10-01

The effect of sago and sugar factory effluents was studied on Gossypium hirsutum L. var. MCU 5 and MCU 11. Plants were irrigated with 0, 25, 50, 75 and 100% of effluents of both factories. At lower concentration (25%) of sugar factory effluents had stimulatory effect on all biochemical contents observed. Moreover, all concentration of sago factory effluents were found to have inhibitory effect on all biochemical contents except proline content which increased with increasing concentration of both the effluents. Plants growing on adjacent to sago and sugar factories or they irrigated with such type of polluted water, may accumulate the heavy metals found in both the effluents, at higher levels in plant products and if consumed may have similar effect on living organisms.

An asymmetric Β-factory based on PEP

International Nuclear Information System (INIS)

Oddone, P.

1989-01-01

This paper reviews the motivation for building asymmetric B-factories based on storage rings and describes the current LBL/SLAC study to develop such a factory by modifying the PEP storage ring and adding a new low energy (2.5-3 GeV) storage ring. Collisions between the beam of the modified high energy PEP ring and the low energy ring lead to a luminosity of 2 x 10 33 cm- 2 sec - 1 at E cm = Y(4s) with currents of 0.8A in each beam. Further increases in current can lead to luminosities close to 10 34 cm - 2 sec - 1

Exploratory and Confirmatory Factor Analyses of Delirium Symptoms in a Sample of Nursing Home Residents.

Science.gov (United States)

Moyo, Patience; Huang, Ting-Ying; Simoni-Wastila, Linda; Harrington, Donna

2018-02-01

This study examined the latent constructs of delirium symptoms among nursing home (NH) residents in the United States. Cross-sectional NH assessment data (Minimum Data Set 2.0) from the 2009 Medicare Current Beneficiary Survey were used. Data from two independent, randomly selected subsamples of residents ≥65 years were analyzed using exploratory factor analysis (EFA) and confirmatory factor analysis (CFA). There were 367 and 366 individuals in the EFA and CFA, respectively. Assessment of multiple model fit statistics in CFA indicated that the two-factor structure provided better fit for the data than a one-factor solution. The two factors represented cognitive and behavioral latent constructs as suggested by the related literature. A correlation of .72 between these constructs suggested moderate discriminant validity. This finding emphasizes the importance of health care providers to be attentive to both cognitive and behavioral symptoms when diagnosing, treating, and managing delirium.

Synthetic yeast based cell factories for vanillin-glucoside production

DEFF Research Database (Denmark)

Strucko, Tomas

and controlled expression/overexpression of genes of interest. De novo biosynthetic pathway for vanillin-β-glucoside production was employed as a model system for several case studies in this project. In order to construct yeast cell factories fulfilling current demands of industrial biotechnology, methods......The yeast Saccharomyces cerevisiae is well a characterized microorganism and widely used as eukaryotic model organism as well as a key cell factory for bioproduction of various products. The latter comprise a large variety of scientifically and industrially relevant products such as low-value bulk...... chemicals and biofuels, food additives, high-value chemicals and recombinant proteins. Despite the recent achievements in the fields of systems biology and metabolic engineering together with availability of broad genetic engineering toolbox, the full potential of S. cerevisiae as a cell factory is not yet...

Psychometric Properties and Confirmatory Factor Analysis of the Student Engagement in School Success Skills

Science.gov (United States)

Brigman, Greg; Wells, Craig; Webb, Linda; Villares, Elizabeth; Carey, John C.; Harrington, Karen

2015-01-01

This article describes the confirmatory factor analysis of the Student Engagement in School Success Skills (SESSS) instrument. The results of this study confirm that the SESSS has potential to be a useful self-report measure of elementary students' use of strategies and skills associated with enhanced academic learning and achievement.

Profil Konsumen dan Pesaing pada “Factory Bakery”

OpenAIRE

Salam, Ramdhan; Rengkung, Leonardus R; Katiandagho, Theodora M; Ngangi, Charles R

2015-01-01

The purpose of this study was to describe the profile of competitors and consumers in the Factory Bakery. This research was conducted at the Factory Bakery is located at Pogidon Street, Tuminting, Manado. The collection of data carried out for three months, from June 2015 to Agustus 2015. The primary data in this study were taken two ways to measure the variables of consumers by asking directly to consumers for six days, whereas for measuring competitors by asking directly to the owner of th...

Implementation of Project Management Concept into Industrial Energetics: Case Study in Paper Factory

Directory of Open Access Journals (Sweden)

Golub Markovic

2015-05-01

Full Text Available Fuel changing is directly linked to market movements of energy sources, consequently, large companies adapt to these changes and move towards economically worthwhile strategies. The appearance of an energy source, change or fuel production startup, is a complex investment project in the field of industrial energetics. This research paper brings a case study of transition from gas to solid fuel in the paper factory, where the factory achieved significant savings by changing the basic fuel. In this study we applied a large number of criteria and parameters of the project management concepts (such as WBS structure, Gantt chart, SWOT analysis, criteria for settlement date, etc.. The purpose of this study is to demonstrate and broaden the knowledge base of in the industrial and energy sectors and to show significant benefits and cost savings which occur as a result of changes of energy sources in the industry involving mass production processes.

Factorial representations of path groups

International Nuclear Information System (INIS)

Albeverio, S.; Hoegh-Krohn, R.; Testard, D.; Vershik, A.

1983-11-01

We give the reduction of the energy representation of the group of mappings from I = [ 0,1 ], S 1 , IRsub(+) or IR into a compact semi simple Lie group G. For G = SU(2) we prove the factoriality of the representation, which is of type III in the case I = IR

Food-Energy Interactive Tradeoff Analysis of Sustainable Urban Plant Factory Production Systems

OpenAIRE

Li-Chun Huang; Yu-Hui Chen; Ya-Hui Chen; Chi-Fang Wang; Ming-Che Hu

2018-01-01

This research aims to analyze the food–energy interactive nexus of sustainable urban plant factory systems. Plant factory systems grow agricultural products within artificially controlled growing environment and multi-layer vertical growing systems. The system controls the supply of light, temperature, humidity, nutrition, water, and carbon dioxide for growing plants. Plant factories are able to produce consistent and high-quality agricultural products within less production space for urban a...

Worry About Caregiving Performance: A Confirmatory Factor Analysis

Directory of Open Access Journals (Sweden)

Ruijie Li

2018-03-01

Full Text Available Recent studies on the Zarit Burden Interview (ZBI support the existence of a unique factor, worry about caregiving performance (WaP, beyond role and personal strain. Our current study aims to confirm the existence of WaP within the multidimensionality of ZBI and to determine if predictors of WaP differ from the role and personal strain. We performed confirmatory factor analysis (CFA on 466 caregiver-patient dyads to compare between one-factor (total score, two-factor (role/personal strain, three-factor (role/personal strain and WaP, and four-factor models (role strain split into two factors. We conducted linear regression analyses to explore the relationships between different ZBI factors with socio-demographic and disease characteristics, and investigated the stage-dependent differences between WaP with role and personal strain by dyadic relationship. The four-factor structure that incorporated WaP and split role strain into two factors yielded the best fit. Linear regression analyses reveal that different variables significantly predict WaP (adult child caregiver and Neuropsychiatric Inventory Questionnaire (NPI-Q severity from role/personal strain (adult child caregiver, instrumental activities of daily living, and NPI-Q distress. Unlike other factors, WaP was significantly endorsed in early cognitive impairment. Among spouses, WaP remained low across Clinical Dementia Rating (CDR stages until a sharp rise in CDR 3; adult child and sibling caregivers experience a gradual rise throughout the stages. Our results affirm the existence of WaP as a unique factor. Future research should explore the potential of WaP as a possible intervention target to improve self-efficacy in the milder stages of burden.

Measurement properties of the WOMAC LK 3.1 pain scale.

Science.gov (United States)

Stratford, P W; Kennedy, D M; Woodhouse, L J; Spadoni, G F

2007-03-01

The Western Ontario and McMaster Universities Osteoarthritis Index (WOMAC) is applied extensively to patients with osteoarthritis of the hip or knee. Previous work has challenged the validity of its physical function scale however an extensive evaluation of its pain scale has not been reported. Our purpose was to estimate internal consistency, factorial validity, test-retest reliability, and the standard error of measurement (SEM) of the WOMAC LK 3.1 pain scale. Four hundred and seventy-four patients with osteoarthritis of the hip or knee awaiting arthroplasty were administered the WOMAC. Estimates of internal consistency (coefficient alpha), factorial validity (confirmatory factor analysis), and the SEM based on internal consistency (SEM(IC)) were obtained. Test-retest reliability [Type 2,1 intraclass correlation coefficients (ICC)] and a corresponding SEM(TRT) were estimated on a subsample of 36 patients. Our estimates were: internal consistency alpha=0.84; SEM(IC)=1.48; Type 2,1 ICC=0.77; SEM(TRT)=1.69. Confirmatory factor analysis failed to support a single factor structure of the pain scale with uncorrelated error terms. Two comparable models provided excellent fit: (1) a model with correlated error terms between the walking and stairs items, and between night and sit items (chi2=0.18, P=0.98); (2) a two factor model with walking and stairs items loading on one factor, night and sit items loading on a second factor, and the standing item loading on both factors (chi2=0.18, P=0.98). Our examination of the factorial structure of the WOMAC pain scale failed to support a single factor and internal consistency analysis yielded a coefficient less than optimal for individual patient use. An alternate strategy to summing the five-item responses when considering individual patient application would be to interpret item responses separately or to sum only those items which display homogeneity.

The TRIUMF KAON Factory

International Nuclear Information System (INIS)

Craddock, M.

1989-05-01

TRIUMF has been awarded $11M for a one-year pre-construction Engineering Design and Impact Study of the KAON Factory. This will enable prototypes of many accelerator components to be built and the design of the accelerators and the layout of the experimental areas to be reviewed. The building and tunnel designs will be finalized, environmental, legal and economic impact studies carried out, and international involvement pursued further

SLAC B Factory computing

International Nuclear Information System (INIS)

Kunz, P.F.

1992-02-01

As part of the research and development program in preparation for a possible B Factory at SLAC, a group has been studying various aspects of HEP computing. In particular, the group is investigating the use of UNIX for all computing, from data acquisition, through analysis, and word processing. A summary of some of the results of this study will be given, along with some personal opinions on these topics

Confirmatory factor analysis of the Autonomy over Tobacco Scale (AUTOS) in adults.

Science.gov (United States)

Wellman, Robert J; DiFranza, Joseph R; O'Loughlin, Jennifer

2015-11-01

The Autonomy over Tobacco Scale (AUTOS), a 12-item self-administered questionnaire, was designed to measure autonomy in three correlated lower-order symptom domains: withdrawal, psychological dependence, and cue-induced craving. The factor structure of the AUTOS remains an open question; confirmatory analyses in adolescents supported the hierarchical structure, while exploratory analyses in adolescents and adults yield single-factor solutions. Here we seek to determine whether the hypothesized hierarchical structure is valid in adult smokers. The AUTOS was administered to two independent convenience samples of adult current smokers: a calibration sample recruited in the US for online studies, and a confirmation sample drawn from the prospective Nicotine Dependence in Teens study in Montreal. We tested competing hierarchical and single-factor models using the robust weighted least-squares (WLSMV) estimation method. A single-factor model that allowed correlated error variances between theoretically related items fit well in the calibration sample (n = 434), χ(2)SB(52) = 165.71; χ(2)/df = 3.19; SRMR = 0.03; CFI = 0.96; NNFI = 0.95; RMSEA = 0.07 (95% CI: 0.06, 0.08). Reliability of the single factor was high (ωB = 0.92) and construct validity was adequate. In the confirmation sample (n = 335), a similar model fit well:χ(2)SB(53) = 126.94; χ(2)/df = 2.44; SRMR = 0.04; CFI = 0.95; NNFI = 0.93; RMSEA = 0.07 (95% CI: 0.05, 0.08). Reliability of the single factor was again high (ωB = 0.92) and construct validity was adequate. The AUTOS is unidimensional in adult smokers. Copyright © 2015 Elsevier Ltd. All rights reserved.

75 FR 57532 - In the Matter of: Stone & Webster Construction, Inc.; Confirmatory Order (Effective Immediately)

Science.gov (United States)

2010-09-21

... Any person adversely affected by this Confirmatory Order, other than Shaw, may request a hearing... Safety Conscious Work Environment (SCWE) and Safety Culture: At the parent company, The Shaw Group Inc... performance evaluations; Periodic independent culture surveys. For nuclear maintenance sites: A SCWE Procedure...

Proceedings of the Workshop on CP Violation at KAON Factory

International Nuclear Information System (INIS)

Ng, J.N.

1989-07-01

These proceedings contain the written version of eight talks delivered at the Workshop on CP Violation at KAON Factory. The articles contain reviews on the exploration of CP violation effects associated with the s-quark. Discussion on the use of intense kaon fluxes, which will be available at the proposed KAON Factory, are included

General and specific attention-deficit/hyperactivity disorder factors of children 4 to 6 years of age: An exploratory structural equation modeling approach to assessing symptom multidimensionality.

Science.gov (United States)

Arias, Víctor B; Ponce, Fernando P; Martínez-Molina, Agustín; Arias, Benito; Núñez, Daniel

2016-01-01

We tested first-order factor and bifactor models of attention-deficit/hyperactivity disorder (ADHD) using confirmatory factor analysis (CFA) and exploratory structural equation modeling (ESEM) to adequately summarize the Diagnostic and Statistical Manual of Mental Disorders, 4th Edition, (DSM-IV-TR) symptoms observed in a Spanish sample of preschoolers and kindergarteners. Six ESEM and CFA models were estimated based on teacher evaluations of the behavior of 638 children 4 to 6 years of age. An ESEM bifactor model with a central dimension plus 3 specific factors (inattention, hyperactivity, and impulsivity) showed the best fit and interpretability. Strict invariance between the sexes was observed. The bifactor model provided a solution to previously encountered inconsistencies in the factorial models of ADHD in young children. However, the low reliability of the specific factors casts doubt on the utility of the subscales for ADHD measurement. More research is necessary to clarify the nature of G and S factors of ADHD. (c) 2016 APA, all rights reserved.

Reengineering through natural structures: the fractal factory

Science.gov (United States)

Sihn, Wilfried

1995-08-01

Many branches of European industry have had to recognize that their lead in the world market has been caught up with, particularly through Asian competition. In many cases a deficit of up to 30% in costs and productivity already exists. The reasons are rigid, Tayloristic company structures. The companies are not in a position to react flexibly to constantly changing environmental conditions. This article illustrates the methods of the `fractal company' which are necessary to solve the structure crisis. The fractal company distinguishes itself through its dynamics and its vitality, as well as its independent reaction to the changing circumstances. The developed methods, procedures, and framework conditions such as company structuring, human networking, hierarchy formation, and models for renumeration and working time are explained. They are based on practical examples from IPA's work with the automobile industry, their suppliers, and the engineering industry.

Fabrication of thorium nitrate at the factory at the Bouchet

International Nuclear Information System (INIS)

Braun, C.; Lorrain, Ch.; Mahut, R.; Mariette, R.; Muller, J.; Prugnard, J.

1958-01-01

A urano-thorianite mineral from Madagascar is industrially treated at the factory of the Bouchet in order to obtain pure thorium in the form of the nitrate and a uranium concentrate in the form of uranate. The required factory was designed and constructed in 1955 and 1956 by the firm Potasse et Engrais Chimiques (P.E.C.) on behalf of the French Atomic Energy authority. The mineral which has previously undergone a gravimetric sorting and enrichment at the mine, is in the form of a heavy rock (the density can be as high as 10), having a cubic structure. It consists principally of a mixture of thorium oxide and uranium oxide and contains between 50 and 75 per cent thorium and between 5 and 20 per cent of uranium. On the same sample a high content in either thorium or uranium in general corresponds to a low content in the other of the two metals; this rule is not however always obeyed absolutely. Among other elements present we shall only mention the Pb, Fe, Ce, Ra and other radioactive elements, since their presence influences the treatment of the mineral. We shall first briefly describe the process, which has already been described in previous publications, we consider to be worthy of attention. (author) [fr

DKIST enclosure modeling and verification during factory assembly and testing

Science.gov (United States)

Larrakoetxea, Ibon; McBride, William; Marshall, Heather K.; Murga, Gaizka

2014-08-01

The Daniel K. Inouye Solar Telescope (DKIST, formerly the Advanced Technology Solar Telescope, ATST) is unique as, apart from protecting the telescope and its instrumentation from the weather, it holds the entrance aperture stop and is required to position it with millimeter-level accuracy. The compliance of the Enclosure design with the requirements, as of Final Design Review in January 2012, was supported by mathematical models and other analyses which included structural and mechanical analyses (FEA), control models, ventilation analysis (CFD), thermal models, reliability analysis, etc. During the Enclosure Factory Assembly and Testing the compliance with the requirements has been verified using the real hardware and the models created during the design phase have been revisited. The tests performed during shutter mechanism subsystem (crawler test stand) functional and endurance testing (completed summer 2013) and two comprehensive system-level factory acceptance testing campaigns (FAT#1 in December 2013 and FAT#2 in March 2014) included functional and performance tests on all mechanisms, off-normal mode tests, mechanism wobble tests, creation of the Enclosure pointing map, control system tests, and vibration tests. The comparison of the assumptions used during the design phase with the properties measured during the test campaign provides an interesting reference for future projects.

SAFETY OF LIFE ACTIVITY AND ECOLOGICAL COMPATIBILITY IN THE GROCERY DEPARTMENT OF A BEET-SUGAR FACTORY

Directory of Open Access Journals (Sweden)

V. V. Ageev

2015-01-01

Full Text Available Beet-sugar factory - is a large, well-equipped with modern technology, the company that operates in a continuous circuit. In the technological structure of a sugar factory there are three production divisions: beet processing department, juice purification house and grocery department. In the grocery department of a sugar factory dangerous and harmful factors may encounter while using equipment such as vacuum devices, centrifuges, and crystallizer tank, massecuite distributor, driers and classifiers sugar. The working area of the service of machinery may appear dangerous or harmful factors, which are divided into the following groups: physical, chemical, biological and physiological. To maintain microclimate parameters can be applied general ventilation, in which the replacement of the warm air to the cold going around the room volume. Heating in the grocery department in the production season is not carried out, since it is sufficient to heat generated by the equipment. In the grocery department uses natural and artificial lighting. In the sugar factory used the following measures to protect against vibration: perform detailed assembly, eliminate defects and looseness of individual parts; way to isolate the transmission of vibrations from the machine to the foundation apply vibration isolators. Widespread use of electrical installations in a sugar factory creates the risk of electric shock to persons. Causes of electrical shocks are often disadvantages of construction and installation of the equipment, its operation is wrong. During drying and transportation of sugar produced by static electricity. To remove the static electricity equipment grounded; also used the increase in humidity; air ionization. To reduce the consumption of fresh industrial water from reservoirs provides for the establishment of the system of working circuits cleaning and maximum reuse of industrial water. Thus, safety and environmental compliance in the grocery

Physics at a future Neutrino Factory and super-beam facility

International Nuclear Information System (INIS)

Bandyopadhyay, A; Choubey, S; Gandhi, R; Goswami, S; Roberts, B L; Bouchez, J; Antoniadis, I; Ellis, J; Giudice, G F; Schwetz, T; Umasankar, S; Karagiorgi, G; Aguilar-Arevalo, A; Conrad, J M; Shaevitz, M H; Pascoli, S; Geer, S; Campagne, J E; Rolinec, M; Blondel, A

2009-01-01

The conclusions of the Physics Working Group of the International Scoping Study of a future Neutrino Factory and super-beam facility (the ISS) are presented. The ISS was carried out by the international community between NuFact05, (the 7th International Workshop on Neutrino Factories and Super-beams, Laboratori Nazionali di Frascati, Rome, 21-26 June 2005) and NuFact06 (Ivine, CA, 24-30 August 2006). The physics case for an extensive experimental programme to understand the properties of the neutrino is presented and the role of high-precision measurements of neutrino oscillations within this programme is discussed in detail. The performance of second-generation super-beam experiments, beta-beam facilities and the Neutrino Factory are evaluated and a quantitative comparison of the discovery potential of the three classes of facility is presented. High-precision studies of the properties of the muon are complementary to the study of neutrino oscillations. The Neutrino Factory has the potential to provide extremely intense muon beams and the physics potential of such beams is discussed in the final section of the report.

Feasibility study for an asymmetric B-factory at KEK

International Nuclear Information System (INIS)

Ozaki, Hitoshi; Yoshimura, Yoshio

1990-06-01

In June, 1989, the study group for exploring the feasibility of B meson physics using an asymmetric energy accelerator was organized. This report is the summary of the results of the works that this study group carried out in nine months, and is the Japanese edition of the report of English edition 'Task Force Report on Asymmetric B-factory at KEK'. The activity plan of the study group was to make up the plan exceeding the preceding CLEO-2 experiment by utilizing the features of an asymmetric B-factory. Under this plan, the activities have been carried out by the study meetings twice every week on the physics side and once every two weeks on the accelerator side. Besides, in two study meetings held in October and December, 1989, several persons who have engaged in the research on B meson physics actually in foreign countries were invited, and the discussion was carried out. At present toward the materialization of the plan, the concrete investigation of accelerators and measuring instruments was begun. The significance of a B-factory and the construction project, the physics of a B-factory, the experimental method and the plan for an accelerator are reported. (K.I.)

Predictors of back disorder among Almeda textile factory workers, North Ethiopia.

Science.gov (United States)

Abraha, Teklehaymanot Huluf; Demoz, Asmelash Tekie; Moges, Haimanot Gebrehiwot; Ahmmed, Ansha Nega

2018-05-16

To guide the development of targeted interventions for the prevention of work-related back pain, this manuscript estimates the prevalence of back pain and its association with a variety of risk factors among Almeda textile factory production works from March to April 2015. An institutional-based cross-sectional study was carried out in Almeda textile factory, North Ethiopia. Randomly selected workers were administered a structured questionnaire about their socio-economic status, lifestyle, working conditions, back pain and selected risk factors. The data was entered to Epi Info 3.5.4 version and analyzed using SPSS version 16. Descriptive statistics were done to characterize the study participants. Bivariate and multiple logistic regressions were fitted to control confounding variables. Adjusted odds ratio with 95% confidence intervals was computed. The prevalence of work-related musculoskeletal disorders was 53.1%. Gender, age, years of service, lack of physical activity, unavailability of adjustable chair, work-load and poor light were significantly associated with increased risk of back pain. The high prevalence of work-related back pain disorder implies that; habit of doing physical exercise, availing adjustable chair and light at the working place, are key issues which require specific interventions.

Why and how to normalize the factorial moments of intermittency

International Nuclear Information System (INIS)

Peschanski, R.

1990-01-01

The normalization of factorial moments of intermittency, which is often the subject of controverses, is justified and (re-)derived from the general assumption of multi-Poissonian statistical noise in the production of particles at high-energy. Correction factors for the horizontal vs. Vertical analyses are derived in general cases, including the factorial multi-bin correlation moments

The Iranian version of 12-item Short Form Health Survey (SF-12): factor structure, internal consistency and construct validity.

Science.gov (United States)

Montazeri, Ali; Vahdaninia, Mariam; Mousavi, Sayed Javad; Omidvari, Speideh

2009-09-16

The 12-item Short Form Health Survey (SF-12) as a shorter alternative of the SF-36 is largely used in health outcomes surveys. The aim of this study was to validate the SF-12 in Iran. A random sample of the general population aged 15 years and over living in Tehran, Iran completed the SF-12. Reliability was estimated using internal consistency and validity was assessed using known groups comparison and convergent validity. In addition, the factor structure of the questionnaire was extracted by performing both exploratory factor analysis (EFA) and confirmatory factor analysis (CFA). In all, 5587 individuals were studied (2721 male and 2866 female). The mean age and formal education of the respondents were 35.1 (SD = 15.4) and 10.2 (SD = 4.4) years respectively. The results showed satisfactory internal consistency for both summary measures, that are the Physical Component Summary (PCS) and the Mental Component Summary (MCS); Cronbach's alpha for PCS-12 and MCS-12 was 0.73 and 0.72, respectively. Known-groups comparison showed that the SF-12 discriminated well between men and women and those who differed in age and educational status (P < 0.001). In addition, correlations between the SF-12 scales and single items showed that the physical functioning, role physical, bodily pain and general health subscales correlated higher with the PCS-12 score, while the vitality, social functioning, role emotional and mental health subscales more correlated with the MCS-12 score lending support to its good convergent validity. Finally the principal component analysis indicated a two-factor structure (physical and mental health) that jointly accounted for 57.8% of the variance. The confirmatory factory analysis also indicated a good fit to the data for the two-latent structure (physical and mental health). In general the findings suggest that the SF-12 is a reliable and valid measure of health related quality of life among Iranian population. However, further studies are needed to

A Profile-Based Framework for Factorial Similarity and the Congruence Coefficient.

Science.gov (United States)

Hartley, Anselma G; Furr, R Michael

2017-01-01

We present a novel profile-based framework for understanding factorial similarity in the context of exploratory factor analysis in general, and for understanding the congruence coefficient (a commonly used index of factor similarity) specifically. First, we introduce the profile-based framework articulating factorial similarity in terms of 3 intuitive components: general saturation similarity, differential saturation similarity, and configural similarity. We then articulate the congruence coefficient in terms of these components, along with 2 additional profile-based components, and we explain how these components resolve ambiguities that can be-and are-found when using the congruence coefficient. Finally, we present secondary analyses revealing that profile-based components of factorial are indeed linked to experts' actual evaluations of factorial similarity. Overall, the profile-based approach we present offers new insights into the ways in which researchers can examine factor similarity and holds the potential to enhance researchers' ability to understand the congruence coefficient.

Physics opportunities for a B Factory

International Nuclear Information System (INIS)

Quinn, H.R.

1992-02-01

In the short time allotted for this talk it is not possible to review all the physics opportunities offered by a B Factory. I focus on the physics of CP Violation and the resulting tests of the Standard Model

Benthic carbonate factories of the Phanerozoic

NARCIS (Netherlands)

Schlager, W.

2003-01-01

Marine carbonate precipitation occurs in three basic modes: abiotic (or quasi-abiotic), biotically induced, and biotically controlled. On a geologic scale, these precipitation modes combine to form three carbonate production systems, or "factories" in the benthic environment: (1) tropical

A confirmatory measurement technique for highly enriched uranium

International Nuclear Information System (INIS)

Sprinkle, J.K. Jr.

1987-07-01

This report describes a confirmatory measurement technique for measuring uranium items in their shipping containers. The measurement consists of a weight verification and the detection of three gamma rays. The weight can be determined very precisely, thus it severely constrains the options of the diverter who might want to imitate the gamma signal with a bogus item. The 185.7-keV gamma ray originates from 235 U, the 1001 keV originates from a daughter of 238 U, and the 2614 keV originates from a daughter of 232 U. These three gamma rays exhibit widely different attenuation properties, they correlate with enrichment and total uranium mass, and they rigorously discriminate against a likely diversion scenario (low-enriched uranium substitution). These four measured quantities, when combined, provide a signature that is very difficult to counterfeit

Advanced Envelope Research for Factory Built Housing, Phase 3 -- Whole-House Prototyping

Energy Technology Data Exchange (ETDEWEB)

Levy, E.; Mullens, M.; Rath, P.

2014-04-01

The Advanced Envelope Research effort will provide factory homebuilders with high performance, cost-effective envelope designs that can be effectively integrated into the plant production process while meeting the thermal requirements of the 2012 IECC standards. Given the affordable nature of manufactured homes, impact on first cost is a major consideration in developing new envelope technologies. This work is part of a multi-phase effort. Phase 1 identified seven envelope technologies and provided a preliminary assessment of three methods for building high performance walls. Phase 2 focused on developing viable product designs, manufacturing strategies, addressing code and structural issues, and cost analysis of the three selected options. An industry advisory committee helped narrow the research focus to perfecting a stud wall design with exterior continuous insulation (CI). Phase 3, completed in two stages, continued the design development effort, exploring and evaluating a range or methods for applying CI to factory built homes. The scope also included material selection, manufacturing and cost analysis, and prototyping and testing. During this phase, a home was built with CI, evaluated, and placed in service. The experience of building a mock up wall section with CI and then constructing on line a prototype home resolved important concerns about how to integrate the material into the production process. First steps were taken toward finding least expensive approaches for incorporating CI in standard factory building practices and a preliminary assessment suggested that even at this early stage the technology is attractive when viewed from a life cycle cost perspective.

Design Learning of Teaching Factory in Mechanical Engineering

Science.gov (United States)

Putra, R. C.; Kusumah, I. H.; Komaro, M.; Rahayu, Y.; Asfiyanur, E. P.

2018-02-01

The industrial world that is the target of the process and learning outcomes of vocational high school (SMK) has its own character and nuance. Therefore, vocational education institutions in the learning process should be able to make the appropriate learning approach and in accordance with the industrial world. One approach to learning that is based on production and learning in the world of work is by industry-based learning or known as Teaching Factory, where in this model apply learning that involves direct students in goods or service activities are expected to have the quality so it is worth selling and accepted by consumers. The method used is descriptive approach. The purpose of this research is to get the design of the teaching factory based on the competency requirements of the graduates of the spouse industry, especially in the engineering department. The results of this study is expected to be one of the choice of model factory teaching in the field of machinery engineering in accordance with the products and competencies of the graduates that the industry needs.

An asymmetric B factory based on PEP

Energy Technology Data Exchange (ETDEWEB)

1991-02-01

In this report we describe a design for a high-luminosity Asymmetric B Factory to be built in the PEP tunnel on the SLAC site. This proposal, a collaborative effort SLAC, LBL, and LLNL, is the culmination of more than two years of effort aimed at the design and construction of an asymmetric e{sup +}e{sup {minus}} collider capable of achieving a luminosity of L = 3 {times} 10{sup 33} cm{sup {minus}2} s{sup {minus}1}. The configuration adopted utilizes two storage rings, and electron ring operating at 9 GeV and a positron ring at 3.1 GeV, each with a circumference of 2200 m. The high-energy ring is an upgrade of the PEP storage ring at SLAC; all PEP magnets and most power supplies will be reused. The upgrade consists primarily of replacing the PEP vacuum chamber and RF system with newly designed versions optimized for the high-current environment of the B Factory. The low-energy ring will be newly constructed and will be situated atop the high-energy ring in the PEP tunnel. Utilities already installed in the PEP tunnel are largely sufficient to operate the two B Factory storage rings.

Test equality between two binary screening tests with a confirmatory procedure restricted on screen positives.

Science.gov (United States)

Lui, Kung-Jong; Chang, Kuang-Chao

2015-01-01

In studies of screening accuracy, we may commonly encounter the data in which a confirmatory procedure is administered to only those subjects with screen positives for ethical concerns. We focus our discussion on simultaneously testing equality of sensitivity and specificity between two binary screening tests when only subjects with screen positives receive the confirmatory procedure. We develop four asymptotic test procedures and one exact test procedure. We derive sample size calculation formula for a desired power of detecting a difference at a given nominal [Formula: see text]-level. We employ Monte Carlo simulation to evaluate the performance of these test procedures and the accuracy of the sample size calculation formula developed here in a variety of situations. Finally, we use the data obtained from a study of the prostate-specific-antigen test and digital rectal examination test on 949 Black men to illustrate the practical use of these test procedures and the sample size calculation formula.

Model Pembelajaran Teaching Factory untuk Meningkatkan Kompetensi Siswa dalam Mata Pelajaran Produktif

OpenAIRE

Hidayat M., Dadang

2011-01-01

: The Model of Teaching Factory to Promote Students' Competence in Productive Sub­jects. The present article reports on a research project using the model of six-step teaching factory known as Model TF-6M. This R & D project was aimed at promoting students' competences regarding productive subjects at Vocational Schools. The six steps in the teaching factory model include receiving orders, ana­lyzing orders, stating readiness in executing orders, execution of orders, doing quality control, an...

The Two- and Three-Dimensional Models of the HK-WISC: A Confirmatory Factor Analysis.

Science.gov (United States)

Chan, David W.; Lin, Wen-Ying

1996-01-01

Confirmatory analyses on the Hong Kong Wechsler Intelligence Scale for Children (HK-WISC) provided support for composite score interpretation based on the two- and three-dimensional models across age levels. Test sample was comprised of 1,100 children, ranging in age from 5 to 15 years at all 11 age levels specified by the HK-WISC. (KW)

Virtual Factory Framework for Supporting Production Planning and Control.

Science.gov (United States)

Kibira, Deogratias; Shao, Guodong

2017-01-01

Developing optimal production plans for smart manufacturing systems is challenging because shop floor events change dynamically. A virtual factory incorporating engineering tools, simulation, and optimization generates and communicates performance data to guide wise decision making for different control levels. This paper describes such a platform specifically for production planning. We also discuss verification and validation of the constituent models. A case study of a machine shop is used to demonstrate data generation for production planning in a virtual factory.

Collinear Latent Variables in Multilevel Confirmatory Factor Analysis : A Comparison of Maximum Likelihood and Bayesian Estimation

NARCIS (Netherlands)

Can, Seda; van de Schoot, Rens|info:eu-repo/dai/nl/304833207; Hox, Joop|info:eu-repo/dai/nl/073351431

2015-01-01

Because variables may be correlated in the social and behavioral sciences, multicollinearity might be problematic. This study investigates the effect of collinearity manipulated in within and between levels of a two-level confirmatory factor analysis by Monte Carlo simulation. Furthermore, the

Structural validity of the Wechsler Intelligence Scale for Children-Fifth Edition: Confirmatory factor analyses with the 16 primary and secondary subtests.

Science.gov (United States)

Canivez, Gary L; Watkins, Marley W; Dombrowski, Stefan C

2017-04-01

The factor structure of the Wechsler Intelligence Scale for Children-Fifth Edition (WISC-V; Wechsler, 2014a) standardization sample (N = 2,200) was examined using confirmatory factor analyses (CFA) with maximum likelihood estimation for all reported models from the WISC-V Technical and Interpretation Manual (Wechsler, 2014b). Additionally, alternative bifactor models were examined and variance estimates and model-based reliability estimates (ω coefficients) were provided. Results from analyses of the 16 primary and secondary WISC-V subtests found that all higher-order CFA models with 5 group factors (VC, VS, FR, WM, and PS) produced model specification errors where the Fluid Reasoning factor produced negative variance and were thus judged inadequate. Of the 16 models tested, the bifactor model containing 4 group factors (VC, PR, WM, and PS) produced the best fit. Results from analyses of the 10 primary WISC-V subtests also found the bifactor model with 4 group factors (VC, PR, WM, and PS) produced the best fit. Variance estimates from both 16 and 10 subtest based bifactor models found dominance of general intelligence (g) in accounting for subtest variance (except for PS subtests) and large ω-hierarchical coefficients supporting general intelligence interpretation. The small portions of variance uniquely captured by the 4 group factors and low ω-hierarchical subscale coefficients likely render the group factors of questionable interpretive value independent of g (except perhaps for PS). Present CFA results confirm the EFA results reported by Canivez, Watkins, and Dombrowski (2015); Dombrowski, Canivez, Watkins, and Beaujean (2015); and Canivez, Dombrowski, and Watkins (2015). (PsycINFO Database Record (c) 2017 APA, all rights reserved).

Factorial versus Typological Models: A Comparison of Methods for Personality Data

Science.gov (United States)

von Davier, Matthias; Naemi, Bobby; Roberts, Richard D.

2012-01-01

This article describes an exploration of the distinction between typological and factorial latent variables in the domain of personality theory. Traditionally, many personality variables have been considered to be factorial in nature, even though there are examples of typological constructs dating back to Hippocrates. Recently, some…

Rosenberg Self-Esteem Scale: Method Effects, Factorial Structure and Scale Invariance Across Migrant Child and Urban Child Populations in China.

Science.gov (United States)

Wu, Yang; Zuo, Bin; Wen, Fangfang; Yan, Lei

2017-01-01

Using confirmatory factor analyses, this study examined the method effects on a Chinese version of the Rosenberg Self-Esteem Scale (RSES; Rosenberg, 1965 ) in a sample of migrant and urban children in China. In all, 982 children completed the RSES, and 9 models and 9 corresponding variants were specified and tested. The results indicated that the method effects are associated with both positively and negatively worded items and that Item 8 should be treated as a positively worded item. Additionally, the method effects models were invariant across migrant and urban children in China.

METABOLIC MODELLING IN THE DEVELOPMENT OF CELL FACTORIES BY SYNTHETIC BIOLOGY

Directory of Open Access Journals (Sweden)

Paula Jouhten

2012-10-01

Full Text Available Cell factories are commonly microbial organisms utilized for bioconversion of renewable resources to bulk or high value chemicals. Introduction of novel production pathways in chassis strains is the core of the development of cell factories by synthetic biology. Synthetic biology aims to create novel biological functions and systems not found in nature by combining biology with engineering. The workflow of the development of novel cell factories with synthetic biology is ideally linear which will be attainable with the quantitative engineering approach, high-quality predictive models, and libraries of well-characterized parts. Different types of metabolic models, mathematical representations of metabolism and its components, enzymes and metabolites, are useful in particular phases of the synthetic biology workflow. In this minireview, the role of metabolic modelling in synthetic biology will be discussed with a review of current status of compatible methods and models for the in silico design and quantitative evaluation of a cell factory.

High-current proton accelerators-meson factories

International Nuclear Information System (INIS)

Dmitrievskij, V.P.

1979-01-01

A possibility of usage of accelerators of neutron as well as meson factories is considered. Parameters of linear and cyclic accelerators are given, which are employed as meson factories and as base for developing intense neutron generators. It is emphasized that the principal aim of developing neutron generators on the base of high current proton accelerators is production of intense neutron fluxes with a present energy spectrum. Production of tens-and-hundreds milliampere currents at the energy of 800-1000 MeV is considered at present for two types of accelerating facilities viz. linear accelerators under continuous operating conditions and cyclotrons with strong focusing. Quantitative evaluations of developing high-efficiency linear and cyclic accelerators are considered. The basic parameters of an ccelerating complex are given, viz. linear accelerator-injector and 800 MeV isochronous cyclotron. The main problems associated with their realization are listed [ru

Mobile monitoring and embedded control system for factory environment.

Science.gov (United States)

Lian, Kuang-Yow; Hsiao, Sung-Jung; Sung, Wen-Tsai

2013-12-17

This paper proposes a real-time method to carry out the monitoring of factory zone temperatures, humidity and air quality using smart phones. At the same time, the system detects possible flames, and analyzes and monitors electrical load. The monitoring also includes detecting the vibrations of operating machinery in the factory area. The research proposes using ZigBee and Wi-Fi protocol intelligent monitoring system integration within the entire plant framework. The sensors on the factory site deliver messages and real-time sensing data to an integrated embedded systems via the ZigBee protocol. The integrated embedded system is built by the open-source 32-bit ARM (Advanced RISC Machine) core Arduino Due module, where the network control codes are built in for the ARM chipset integrated controller. The intelligent integrated controller is able to instantly provide numerical analysis results according to the received data from the ZigBee sensors. The Android APP and web-based platform are used to show measurement results. The built-up system will transfer these results to a specified cloud device using the TCP/IP protocol. Finally, the Fast Fourier Transform (FFT) approach is used to analyze the power loads in the factory zones. Moreover, Near Field Communication (NFC) technology is used to carry out the actual electricity load experiments using smart phones.

Mobile Monitoring and Embedded Control System for Factory Environment

Science.gov (United States)

Lian, Kuang-Yow; Hsiao, Sung-Jung; Sung, Wen-Tsai

2013-01-01

This paper proposes a real-time method to carry out the monitoring of factory zone temperatures, humidity and air quality using smart phones. At the same time, the system detects possible flames, and analyzes and monitors electrical load. The monitoring also includes detecting the vibrations of operating machinery in the factory area. The research proposes using ZigBee and Wi-Fi protocol intelligent monitoring system integration within the entire plant framework. The sensors on the factory site deliver messages and real-time sensing data to an integrated embedded systems via the ZigBee protocol. The integrated embedded system is built by the open-source 32-bit ARM (Advanced RISC Machine) core Arduino Due module, where the network control codes are built in for the ARM chipset integrated controller. The intelligent integrated controller is able to instantly provide numerical analysis results according to the received data from the ZigBee sensors. The Android APP and web-based platform are used to show measurement results. The built-up system will transfer these results to a specified cloud device using the TCP/IP protocol. Finally, the Fast Fourier Transform (FFT) approach is used to analyze the power loads in the factory zones. Moreover, Near Field Communication (NFC) technology is used to carry out the actual electricity load experiments using smart phones. PMID:24351642

Mobile Monitoring and Embedded Control System for Factory Environment

Directory of Open Access Journals (Sweden)

Kuang-Yow Lian

2013-12-01

Full Text Available This paper proposes a real-time method to carry out the monitoring of factory zone temperatures, humidity and air quality using smart phones. At the same time, the system detects possible flames, and analyzes and monitors electrical load. The monitoring also includes detecting the vibrations of operating machinery in the factory area. The research proposes using ZigBee and Wi-Fi protocol intelligent monitoring system integration within the entire plant framework. The sensors on the factory site deliver messages and real-time sensing data to an integrated embedded systems via the ZigBee protocol. The integrated embedded system is built by the open-source 32-bit ARM (Advanced RISC Machine core Arduino Due module, where the network control codes are built in for the ARM chipset integrated controller. The intelligent integrated controller is able to instantly provide numerical analysis results according to the received data from the ZigBee sensors. The Android APP and web-based platform are used to show measurement results. The built-up system will transfer these results to a specified cloud device using the TCP/IP protocol. Finally, the Fast Fourier Transform (FFT approach is used to analyze the power loads in the factory zones. Moreover, Near Field Communication (NFC technology is used to carry out the actual electricity load experiments using smart phones.

Limit values in special agreements between factories and sewage works

International Nuclear Information System (INIS)

Lundstroem, Yrjoe

1987-01-01

The operation of sewage works is controlled in Finland by the water and health authorities. These authorities set special quality demands for the effluent from sewage treatment plants into the recipient. Also other wastes from treatment plants, mainly sludges, have special regulations and operational target values. Sewage works have to achieve the aim goals and limit values set. In order to fulfill the regulations, sewage works impose such limit values on factory wastewaters that there will be no problems at the treatment plants. Sewage works can act in two ways: - require the factory to operate in such a way that the limit values are not exceeded, - the factory pays a certain sum of money to the sewage works, which takes care of the whole problem. It can be said in general, that it is not possible to get rid of harmful substances by payment to the sewage works if the substances cause treatment problems or problems in sludge disposal. If the factory produces wastewater that contains a higher organic load, more suspended solids or a higher nutrient load than normal sanitary wastewater, the problem is most often solved by paying an extra fee to the sewage works

NRC confirmatory safety system testing in support of AP600 design review

International Nuclear Information System (INIS)

Rhee, G.S.; Bessette, D.E.; Shotkin, L.M.

1994-01-01

Westinghouse Electric Corporation has submitted the Advanced Passive 600 MWe (AP600) nuclear power plant design to the NRC for design certification. The Office of Nuclear Regulatory Research is proceeding to conduct confirmatory testing to help the NRC staff evaluate the AP600 safety system design. For confirmatory testing, it was determined that the cost-effective route was to modify an existing full-height, full-pressure test facility rather than build a new one. Thus, all the existing integral effects test facilities, both in the US and abroad, were screened to select the best candidate. As a result, the ROSA-V (Rig of Safety Assessment-V) test facility located in the Japan Atomic Energy Research Institute (JAERI) was chosen. However, because of some differences in design between the existing ROSA-V facility and the AP600, the ROSA-V is being modified to conform to the AP600 safety system design. The modification work will be completed by the end of this year. A series of facility characterization tests will then be performed in January 1994 for the modified part of the facility before the main test series is initiated in February 1994. A total of 12 tests will be performed in 1994 under Phase I of this cooperative program with JAERI. Phase II testing is being considered to be conducted in 1995 mainly for beyond-design-basis accident evaluation

A Confirmatory Factor Analysis of the Smoking and Weight Eating Episodes Test (SWEET).

Science.gov (United States)

Farris, Samantha G; DiBello, Angelo M; Bloom, Erika Litvin; Abrantes, Ana M

2018-03-20

The Smoking and Weight Eating Episodes Test (SWEET; Adams et al. 2011) is a self-report measure designed to assess multiple reasons why and when smokers use cigarettes for appetite, weight, and shape management, that was initially developed and validated in young female smokers. The aim of the current study was to evaluate the factor structure and psychometric properties of the SWEET measure among both male and female daily cigarette smokers. Participants (n = 577; M age  = 44.42; SD = 13.80; 52.7% female) were daily smokers recruited through Qualtrics Online Sample for an anonymous study on smoking and health. On average, participants reported smoking for 25.7 years (SD = 14.35), smoked 17.0 cigarettes per day (SD = 8.38), and had moderate levels of tobacco dependence. Confirmatory factor analyses supported the initial factor structure found in the original SWEET measure suggesting a four-factor structure fit the data well, but not a one-factor structure. Factors included using cigarettes for appetite suppression, using cigarettes to prevent overeating, smoking to cope with body dissatisfaction, and using cigarettes to cope with appetite-related withdrawal symptoms. Tests of measurement invariance revealed no significant differences when evaluating SWEET scores by participant sex. The SWEET factor scores evidenced internal consistency, known groups validity, convergent validity with related constructs (compensatory eating behaviors, tobacco dependence) and cessation-relevant variables (smoking abstinence expectancies, prior withdrawal symptoms), and discriminant validity with physical activity and sedentary behavior. The present study provides evidence in support of the validity and reliability of scores on the SWEET as a multidimensional measure of smoking for appetite, weight, and body-related concerns in male and female daily cigarette smokers.

Portuguese version of the PTSD Checklist-Military Version (PCL-M)-I: Confirmatory Factor Analysis and reliability.

Science.gov (United States)

Carvalho, Teresa; Cunha, Marina; Pinto-Gouveia, José; Duarte, Joana

2015-03-30

The PTSD Checklist-Military Version (PCL-M) is a brief self-report instrument widely used to assess Post-traumatic Stress Disorder (PTSD) symptomatology in war Veterans, according to DSM-IV. This study sought out to explore the factor structure and reliability of the Portuguese version of the PCL-M. A sample of 660 Portuguese Colonial War Veterans completed the PCL-M. Several Confirmatory Factor Analyses were conducted to test different structures for PCL-M PTSD symptoms. Although the respecified first-order four-factor model based on King et al.'s model showed the best fit to the data, the respecified first and second-order models based on the DSM-IV symptom clusters also presented an acceptable fit. In addition, the PCL-M showed adequate reliability. The Portuguese version of the PCL-M is thus a valid and reliable measure to assess the severity of PTSD symptoms as described in DSM-IV. Its use with Portuguese Colonial War Veterans may ease screening of possible PTSD cases, promote more suitable treatment planning, and enable monitoring of therapeutic outcomes. Copyright © 2014 Elsevier Ireland Ltd. All rights reserved.

[Confirmatory factor analysis of the short French version of the Center for Epidemiological Studies of Depression Scale (CES-D10) in adolescents].

Science.gov (United States)

Cartierre, N; Coulon, N; Demerval, R

2011-09-01

Screening depressivity among adolescents is a key public health priority. In order to measure the severity of depressive symptomatology, a four-dimensional 20 items scale called "Center for Epidemiological Studies-Depression Scale" (CES-D) was developed. A shorter 10-item version was developed and validated (Andresen et al.). For this brief version, several authors supported a two-factor structure - Negative and Positive affect - but the relationship between the two reversed-worded items of the Positive affect factor could be better accounted for by correlated errors. The aim of this study is triple: firstly to test a French version of the CES-D10 among adolescents; secondly to test the relevance of a one-dimensional structure by considering error correlation for Positive affect items; finally to examine the extent to which this structural model is invariant across gender. The sample was composed of 269 French middle school adolescents (139 girls and 130 boys, mean age: 13.8, SD=0.65). Confirmatory Factorial Analyses (CFA) using the LISREL 8.52 were conducted in order to assess the adjustment to the data of three factor models: a one-factor model, a two-factor model (Positive and Negative affect) and a one-factor model with specification of correlated errors between the two reverse-worded items. Then, multigroup analysis was conducted to test the scale invariance for girls and boys. Internal consistency of the CES-D10 was satisfying for the adolescent sample (α=0.75). The best fitting model is the one-factor model with correlated errors between the two items of the previous Positive affect factor (χ(2)/dl=2.50; GFI=0.939; CFI=0.894; RMSEA=0.076). This model presented a better statistical fit to the data than the one-factor model without error correlation: χ(2)(diff) (1)=22.14, pstatistic for the model with equality-constrained factor loadings was 121.31. The change in the overall Chi(2) is not statistically significant. This result implies that the model is

Success and Unionism among Indonesian Factory Workers in Tangerang and Cikarang

Directory of Open Access Journals (Sweden)

Giacomo Tabacco

2014-11-01

Full Text Available The article discusses the meaning attached to the ideas of success and personal development among a group of migrant factory workers and unionists in two satellite towns on the outskirts of Jakarta, Indonesia. In particular, it looks closely at the life experiences of a factory worker, two unemployed migrants and a union leader and it illustrates their narratives of hard work and “luck” in the quest for personal growth. It explores the various social networks that sustain life among factory workers while focusing specifically on the role of unionism as a symbolic and material resource to navigate through the precariousness and hardship of salary work and unemployment.

Kaon factories

International Nuclear Information System (INIS)

Craddock, M.K.

1983-03-01

Kaon factories would provide beams 100-1000 times more intense than those available from present accelerators in the 10-30 GeV range. More intense or cleaner secondary beams of kaons, antiprotons and neutrinos would be of particular interest for high precision experiments and studies of rare processes in both particle and nuclear physics, e.g. symmetry violations in K-decay, neutrino scattering, meson and baryon spectroscopy, hypernuclei, exotic atoms, K + studies of nuclear density and resonance propagation in nuclei. The various accelerators proposed include both fast-cycling synchrotrons providing 100 μA proton beams at 15 to 32 GeV and superconducting isochronous ring cyclotrons giving 100-400 μA at up to 15 GeV. This paper describes these designs and the various technical problems associated with them

Technology and Participation in Japanese Factories: The Consequences for Morale and Productivity.

Science.gov (United States)

Hull, Frank; Azumi, Koya

1988-01-01

By fully using their human resources, Japanese factories mass produce goods of low cost and high quality. Participation in Japanese factories occurs in a more hierarchical framework than advocated in the Western model of worker democracy. (JOW)

Next-generation confirmatory disease diagnostics

Science.gov (United States)

Lin, Robert; Gerver, Rachel; Karns, Kelly; Apori, Akwasi A.; Denisin, Aleksandra K.; Herr, Amy E.

2014-06-01

Microfluidic tools are advancing capabilities in screening diagnostics for use in near-patient settings. Here, we review three case studies to illustrate the flexibility and analytical power offered by microanalytical tools. We first overview a near-patient tool for detection of protein markers found in cerebrospinal fluid (CSF), as a means to identify the presence of cerebrospinal fluid in nasal mucous - an indication that CSF is leaking into the nasal cavity. Microfluidic design allowed integration of several up-stream preparatory steps and rapid, specific completion of the human CSF protein assay. Second, we overview a tear fluid based assay for lactoferrin, a protein produced in the lacrimal gland, then secreted into tear fluid. Tear Lf is a putative biomarker for primary SS. A critical contribution of this and related work being measurement of Lf, even in light of well-known and significant matrix interactions and losses during the tear fluid collection and preparation. Lastly, we review a microfluidic barcode platform that enables rapid measurement of multiple infectious disease biomarkers in human sera. The assay presents a new approach to multiplexed biomarker detection, yet in a simple straight microchannel - thus providing a streamlined, simplified microanalytical platform, as is relevant to robust operation in diagnostic settings. We view microfluidic design and analytical chemistry as the basis for emerging, sophisticated assays that will advance not just screening diagnostic technology, but confirmatory assays, sample preparation and handling, and thus introduction and utilization of new biomarkers and assay formats.

ASME factory authorization system and the situation in Japan

International Nuclear Information System (INIS)

Futagawa, Kiyoshi

1978-01-01

Since about three or four years ago, the enterprises of machinery, iron and steel and welding materials in Japan are paying much attention to the acquisition of ASME (American Society of Mechanical Engineers) certificates or authorization to stamp the code symbols. That is, over 70 factories in Japan have undergone ASME examination, and consequently acquired the authorization or certificates. Such authorization is divided into over 20 kinds, of which about 7 are possessed by the companies in Japan. In nuclear field, the kinds of authorization are N (nuclear vessel), NPT (nuclear vessel parts), NV (nuclear vessel safety valve), and MM (material manufacturing). In non-nuclear fields, they are S (power boilers), U (pressure vessels, in Div. 1), and U2 (pressure vessels in Div. 2). The following matters are described: ASME setup, authorization procedures of ASME for factories, the kinds of authorization, factories in Japan holding the authorization or certificates, and renewal of the authorization. (Mori, K.)

Confirmatory Factor Analysis Alternative: Free, Accessible CBID Software.

Science.gov (United States)

Bott, Marjorie; Karanevich, Alex G; Garrard, Lili; Price, Larry R; Mudaranthakam, Dinesh Pal; Gajewski, Byron

2018-02-01

New software that performs Classical and Bayesian Instrument Development (CBID) is reported that seamlessly integrates expert (content validity) and participant data (construct validity) to produce entire reliability estimates with smaller sample requirements. The free CBID software can be accessed through a website and used by clinical investigators in new instrument development. Demonstrations are presented of the three approaches using the CBID software: (a) traditional confirmatory factor analysis (CFA), (b) Bayesian CFA using flat uninformative prior, and (c) Bayesian CFA using content expert data (informative prior). Outcomes of usability testing demonstrate the need to make the user-friendly, free CBID software available to interdisciplinary researchers. CBID has the potential to be a new and expeditious method for instrument development, adding to our current measurement toolbox. This allows for the development of new instruments for measuring determinants of health in smaller diverse populations or populations of rare diseases.

Preliminary Hazard Classification for the Remediation of the 100-B/C Area Remaining Sites (Confirmatory Sampling Effort)

International Nuclear Information System (INIS)

Routt, T.M.

2000-01-01

This document provides the preliminary hazard classification for the sampling and characterization activities to be conducted at the 100-B/C confirmatory sampling effort sites in support of remedial design and eventual remediation of these sites

Leading people positively: cross-cultural validation of the Servant Leadership Survey (SLS).

Science.gov (United States)

Rodríguez-Carvajal, Raquel; de Rivas, Sara; Herrero, Marta; Moreno-Jiménez, Bernardo; van Dierendonck, Dirk

2014-10-24

Servant Leadership emphasizes employee's development and growth within a context of moral and social concern. Nowadays, this management change towards workers´ wellbeing is highlighted as an important issue. The aims of this paper are to adapt to Spanish speakers the Servant Leadership Survey (SLS) by van Dierendonck and Nuijten (2011), and to analyze its factorial validity through confirmatory factor analysis and measurement invariance in three countries. A sample of 638 working people from three Spanish-speaking countries (Spain, Argentina and Mexico) participated in the study. In all three countries, confirmatory factor analyses corroborate the eight factor structure (empowerment, accountability, standing back, humility, authenticity, courage, forgiveness and stewardship) with one second order factor (servant leadership) (in all three samples, CFI, IFI > .92, TLI > .91, RMSEA < .70). Also, factor loadings, reliability and convergent validity were acceptable across samples. Furthermore, through measurement invariance analysis, we detected model equivalence in all three countries including structural residual invariance (ΔCFI = .001). Finally, cultural differences in some dimensions were found and discussed, opening the way for future cross-cultural studies.

On the dimensionality of the stress-related growth scale: one, three, or seven factors?

Science.gov (United States)

Roesch, Scott C; Rowley, Anthony A; Vaughn, Allison A

2004-06-01

We examined the factorial validity and dimensionality of the Stress-Related Growth Scale (SRGS; Park, Cohen, & Murch, 1996) using a large multiethnic sample (n = 1,070). Exploratory and confirmatory factor analyses suggested that a multidimensional representation of the SRGS fit better than a unidimensional representation. Specifically, we cross-validated both a 3-factor model and a 7-factor model using confirmatory factor analysis and were shown to be invariant across gender and ethnic groups. The 3-factor model was represented by global dimensions of growth that included rational/mature thinking, affective/emotional growth, and religious/spiritual growth. We replicated the 7-factor model of Armeli, Gunthert, and Cohen (2001) and it represented more specific components of growth such as Self-Understanding and Treatment of Others. However, some factors of the 7-factor model had questionable internal consistency and were strongly intercorrelated, suggesting redundancy. The findings support the notion that the factor structure of both the original 1-factor and revised 7-factor models are unstable and that the 3-factor model developed in this research has more reliable psychometric properties and structure.

Evolution of the Factory 1975-2006

International Nuclear Information System (INIS)

2006-01-01

Since it was founded in 1973. Equipos Nucleares (ENSA) has been actively present in the nuclear market. This was the reason for its creation and for which it was organized from the very beginning, by designing a company with a nuclear structure and mentality. The author reviews the history and evolution of the Factory- more than a workshop- and describes its different stages, which were strongly affected by the unexpected evolution of a diminishing market- an inexistent market the likes to say- and also stresses the extraordinary difficulty of its work and the determination to remain in the nuclear market. He acknowledges the people and the culture of ENSA emphasizing their dedication, generosity, flexibility, training and enthusiasm, and stresses their stake in being the best and to attain excellence in the quality of supplies, meeting deadlines and customer satisfaction, identifying these as fundamental factors of the company's legacy. Having a better Factory is possible by improving its technological capability through researching and developing its processes, automating and robotizing manufacturing and inspection activities, and simplifying its operating systems. A result of these efforts is the continuous international presence as a supplier and collaborator with the world's leading designers, which has consolidated it as a reference supplier on the American market. Of not is the supply to the market of its different product lines a result of combining its design and manufacturing capabilities with its flexibility and size, all of which contribute to ENSA's wealth, diversity and appeal. ENSA is aware of the forthcoming resurgence of the new nuclear market. It is preparing for the future by renewing and upgrading its manufacturing facilities and implementing new systems techniques- Lean Manufacturing and Six Sigma-into its Annual Improvement Plans to favor and drive its technological capability and competitiveness and to respond to the increasingly demanding

An operator-console system of the photon factory injector LINAC

International Nuclear Information System (INIS)

Nakahara, Kazuo; Abe, Isamu; Furukawa, Kazuro; Kamikubota, Norihiko

1990-01-01

It is sometimes difficult to unify accelerator control systems constructed in different ways. This problem arose in unifying the control systems of the injector linac and the storage ring making up the Photon Factory of the National Laboratory for High Energy Physics. One easy approach is to unify only the operator consoles; the unified console is connected to both separate control systems using gateways. The operator-console system of the Photon Factory injector linac has been designed and constructed using this approach. It consists of several workstations interconnected via a local-area network, a gateway to the old linac control network and a CATV system for the real-time display of the accelerator status. In this way the linac will be controlled from the control center of the Photon Factory storage ring. (orig.)

Burnout Factories: The Challenge of Retaining Great Teachers in Charter Schools

Science.gov (United States)

Fusco, Mark

2017-01-01

In its well-intentioned effort to create alternatives to public school dropout factories, the charter school sector has created teacher burnout factories. But it does not have to be this way. Charter schools can continue to maintain high standards while creating a more sustainable work environment for teachers. This article examines the teacher…

Argonne Tau-charm factory collider design study

International Nuclear Information System (INIS)

Teng, L.C.; Crosbie, E.A.; Norem, J.

1995-01-01

The design approach and design principles for a Tau-charm Factory at Argonne were studied. These studies led to a set of preliminary parameters and tentative component features as presented in this paper

Factorial and reduced K-means reconsidered

NARCIS (Netherlands)

Timmerman, Marieke E.; Ceulemans, Eva; Kiers, Henk A. L.; Vichi, Maurizio

2010-01-01

Factorial K-means analysis (FKM) and Reduced K-means analysis (RKM) are clustering methods that aim at simultaneously achieving a clustering of the objects and a dimension reduction of the variables. Because a comprehensive comparison between FKM and RKM is lacking in the literature so far, a

Work-home interaction of employees in the mining industry

Directory of Open Access Journals (Sweden)

Karina Mostert

2011-08-01

Full Text Available This study aimed to test the construct validity, factorial invariance and reliability of the Survey Work-Home Interaction-NijmeGen (SWING and to explore whether and how the work-home interaction of various socio-demographic groups differ. Random samples (n = 320 were taken of employees in the mining industry. The confirmatory factor analysis results supported the proposed four-factor structure measuring negative/positive work-home interference and negative/positive home-work interference. The multi-group invariance analyses’ results for two language and ethnic groups also supported the factorial invariance of the SWING. All the scales were found to be reliable. Statistically significant differences in work-home interaction were found, based on age, ethnicity, gender, education, marital status, parental status, language, flexibility at work and individuals who had a partner with a paid job.

Structural validity of the Maslach Burnout Inventory and influence of depressive symptoms in banking workplace: Unfastening the occupational conundrum.

Science.gov (United States)

Valente, Maria do Socorro da Silva; Wang, Yuan-Pang; Menezes, Paulo Rossi

2018-06-04

Burnout and mental disorders have been reported in the financial industry. This study aims to examine the structural validity of the Maslach Burnout Inventory (MBI) and to investigate the connection between the dimensions of burnout and depressive symptoms in a sample of 1046 bank employees from North Brazil who completed the MBI and the Patient Health Questionnaire-9 (PHQ-9. Exploratory factor analysis (EFA) and confirmatory factor analysis (CFA) were used to cross-check the factorial structure of the MBI. One-way analysis of variance and correlation analysis were applied to elucidate the relationship between burnout and depressive symptoms. Both 3-factor and 4-factor oblique solutions were plausible EFA models of the burnout syndrome. Results of CFA supported the 19-item 4-factor structure as the best fitting model to data, with two exhaustion factors ("exhausted" and "strained"), depersonalization, and personal accomplishment. The PHQ-9 total score and individual score of depressive items were significantly correlated with all MBI dimensions, notably with the emotional exhaustion dimension. The moderate-to-high correlation observed between burnout and depression suggest the potential utility of the MBI for evaluating burnout among bank employees as well as to point out the need to evaluate systematically the burnout and depressive symptoms given to their potential association. Copyright © 2018. Published by Elsevier B.V.

Muon Acceleration: Neutrino Factory and Beyond

Energy Technology Data Exchange (ETDEWEB)

Bogacz, Alex [Thomas Jefferson National Accelerator Facility (TJNAF), Newport News, VA (United States)

2018-03-01

We summarize the current state of a concept for muon acceleration aimed at a future Neutrino Factory and extendable to Higgs Factory. The main thrust of these studies was to reduce the overall cost while maintaining performance by exploring the interplay between the complexity of the cooling systems and the acceptance of the accelerator complex. To ensure adequate survival for the short-lived muons, acceleration must occur at high average gradient. The need for large transverse and longitudinal acceptances drives the design of the acceleration system to an initially low RF frequency, e.g., 325 MHz, which is then increased to 650 MHz as the transverse size shrinks with increasing energy. High-gradient normal conducting RF cavities at these frequencies require extremely high peak-power RF sources. Hence superconducting RF (SRF) cavities are chosen. We consider an SRF-efficient design based on a multi-pass (4.5) ?dogbone? RLA, extendable to multi-pass FFAG-like arcs.

A Multigroup Confirmatory Factor Analysis of the Patient Health Questionnaire-9 among English- and Spanish-speaking Latinas

Science.gov (United States)

Merz, Erin L.; Malcarne, Vanessa L.; Roesch, Scott C.; Riley, Natasha; Sadler, Georgia Robins

2014-01-01

Depression is a significant problem for ethnic minorities that remains understudied partly due to a lack of strong measures with established psychometric properties. One screening tool, the Patient Health Questionnaire-9 (PHQ-9), which was developed for use in primary care has also gained popularity in research settings. The reliability and validity of the PHQ-9 has been well established among predominantly Caucasian samples, in addition to many minority groups. However, there is little evidence regarding its utility among Hispanic Americans, a large and growing cultural group in the United States. In this study, we investigated the reliability and structural validity of the PHQ-9 in Hispanic American women. A community sample of 479 Latina women from southern California completed the PHQ-9 in their preferred language of English or Spanish. Cronbach’s alphas suggested that there was good internal consistency for both the English- and Spanish-language versions. Structural validity was investigated using multigroup confirmatory factor analysis (CFA). Results support a similar one-factor structure with equivalent response patterns and variances among English- and Spanish-speaking Latinas. These results suggest that the PHQ-9 can be used with confidence in both English and Spanish versions to screen Latinas for depression. PMID:21787063

A Confirmatory Factor Analysis on the Attitude Scale of Constructivist Approach for Science Teachers

Directory of Open Access Journals (Sweden)

E. Evrekli

2010-11-01

Full Text Available Underlining the importance of teachers for the constructivist approach, the present study attempts to develop “Attitude Scale of Construc¬tivist Approach for Science Teachers (ASCAST”. The pre-applications of the scale were administered to a total of 210 science teachers; however, the data obtained from 5 teachers were excluded from the analysis. As a result of the analysis of the data obtained from the pre-applications, it was found that the scale could have a single factor structure, which was tested using the confir¬matory factor analysis. As a result of the initial confirmatory factor analysis, the values of fit were examined and found to be low. Subsequently, by exam¬ining the modification indices, error covariance was added between items 23 and 24 and the model was tested once again. The added error covariance led to a significant improvement in the model, producing values of fit suitable for limit values. Thus, it was concluded that the scale could be employed with a single factor. The explained variance value for the scale developed with a sin¬gle factor structure was calculated to be 50.43% and its reliability was found to be .93. The results obtained suggest that the scale possesses reliable-valid characteristics and could be used in further studies.

Determinants of Occupational Injury in Kombolcha Textile Factory, North-East Ethiopia

Directory of Open Access Journals (Sweden)

S Yessuf Serkalem

2014-04-01

Full Text Available Background: Textile factory is among the most common manufacturing industries that has higher rate of work-related injuries. Knowing the associated factors of work-related injuries can be a critical step for improving the working condition of workers in the sector. Objective: To assess the major determinants of occupational injury among workers in Kombolcha textile factory, North-East Ethiopia. Methods: An institution-based cross-sectional study was conducted from April 1 to 15, 2013 on 455 randomly selected workers after stratification by working departments. The data was collected using a structured questionnaire through face-to-face interview by data collectors of 6 occupational health experts and 6 nurses. Results: Working >48 hrs/wk (aOR: 2.71, 95% CI: 1.18–6.24, handling objects >20 kg (aOR: 2.35, 95% CI: 1.24–4.45, visual concentration (aOR: 3.10, 95% CI: 1.42–6.75, timely maintenance of machine (aOR: 1.80, 95% CI: 1.11–2.93, and sleep disorder (aOR: 2.95, 95% CI: 1.47–5.92 were significant factors for the occurrence of occupational injuries. Conclusion: Many factors including working for a long time with accurate instruments and sleep disorders can cause occupational injury in textile industries.

Determinants of occupational injury in Kombolcha textile factory, North-East Ethiopia.

Science.gov (United States)

Yessuf Serkalem, S; Moges Haimanot, G; Ahmed Ansha, N

2014-04-01

Textile factory is among the most common manufacturing industries that has higher rate of work-related injuries. Knowing the associated factors of work-related injuries can be a critical step for improving the working condition of workers in the sector. To assess the major determinants of occupational injury among workers in Kombolcha textile factory, North-East Ethiopia. An institution-based cross-sectional study was conducted from April 1 to 15, 2013 on 455 randomly selected workers after stratification by working departments. The data was collected using a structured questionnaire through face-to-face interview by data collectors of 6 occupational health experts and 6 nurses. Working >48 hrs/wk (aOR: 2.71, 95% CI: 1.18-6.24), handling objects >20 kg (aOR: 2.35, 95% CI: 1.24-4.45), visual concentration (aOR: 3.10, 95% CI: 1.42-6.75), timely maintenance of machine (aOR: 1.80, 95% CI: 1.11-2.93), and sleep disorder (aOR: 2.95, 95% CI: 1.47-5.92) were significant factors for the occurrence of occupational injuries. Many factors including working for a long time with accurate instruments and sleep disorders can cause occupational injury in textile industries.

The Nursing Performance Instrument: Exploratory and Confirmatory Factor Analyses in Registered Nurses.

Science.gov (United States)

Sagherian, Knar; Steege, Linsey M; Geiger-Brown, Jeanne; Harrington, Donna

2018-04-01

The optimal performance of nurses in healthcare settings plays a critical role in care quality and patient safety. Despite this importance, few measures are provided in the literature that evaluate nursing performance as an independent construct from competencies. The nine-item Nursing Performance Instrument (NPI) was developed to fill this gap. The aim of this study was to examine and confirm the underlying factor structure of the NPI in registered nurses. The design was cross-sectional, using secondary data collected between February 2008 and April 2009 for the "Fatigue in Nursing Survey" (N = 797). The sample was predominantly dayshift female nurses working in acute care settings. Using Mplus software, exploratory and confirmatory factor analyses were applied to the NPI data, which were divided into two equal subsamples. Multiple fit indices were used to evaluate the fit of the alternative models. The three-factor model was determined to fit the data adequately. The factors that were labeled as "physical/mental decrements," "consistent practice," and "behavioral change" were moderately to strongly intercorrelated, indicating good convergent validity. The reliability coefficients for the subscales were acceptable. The NPI consists of three latent constructs. This instrument has the potentialto be used as a self-monitoring instrument that addressesnurses' perceptions of performance while providing patient care.

Phenomenology of scaled factorial moments and future approaches for correlation studies

International Nuclear Information System (INIS)

Seibert, D.

1991-01-01

We show that the definitions of the exclusive and inclusive scaled factorial moments are not equivalent, and propose the use of scaled factorial moments that reduce to the exclusive moments in the case of fixed multiplicity. We then present a new derivation of the multiplicity scaling law for scaled factorial moment data. This scaling law seems to hold, independent of collision energy, for events with fixed projectile and target. However, deviations from this scaling law indicate that correlations in S-Au collisions are 30 times as strong as correlations in hadronic collisions. Finally, we discuss 'split-bin' correlation functions, the most useful tool for future investigations of these anomalously strong hadronic correlations. (orig.)

Energy usage in Beet Suger Factories. Sockerfabrikens energianvaendning; En systemstudie

Energy Technology Data Exchange (ETDEWEB)

Feltborg, G

1990-02-01

A computer program has been developed in order to simulate the energy consumption of beet sugar factories, for various plant configurations. The program is divided into five block units: Extraction and Juice purification, Juice concentration, Crystallization, Drying and finally the Power House. Each block consists of different modules, for example, a heat exchanger, an evaporator, a turbine and a dryer. The purpose of this project was to simulate some different system configurations of a sugar factory, whereby both new and previously used process technologies were utilized. The following parts of the process have been particularly emphasized: Power House - gas turbine, waste heat boiler. Drying - low-temperature dryer, steam dryer. Evaporation - vapour recompression. Crystallization - vapour recompression, continuous system. The different plant configurations have been compared to a reference factory, which is designed according to current technology used in a modern and well balanced Swedish factory. The comparisons are based upon the total power consumption as well as the total annual energy costs. Eleven different plant configurations were studied. The maximum power reduction is 36%, relative to the reference factory. The dissertation also contains an experimental study of a low-temperature drying process. The drying characteristics of pressed beet pulp were studied in a specially designed rotary dryer pilot plant. A number of parameters were varied i.e. the solid moisture content, air velocity, temperature and rotational speed. The results are given in terms of an apparent volumetric heat-transfer coefficient, determined from measured data. A mathematical model was established to determine the residence time of the material in the rotary dryer at different air velocities. (45 refs.).

A Fuzzy Collaborative Forecasting Approach for Forecasting the Productivity of a Factory

Directory of Open Access Journals (Sweden)

Yi-Chi Wang

2013-01-01

Full Text Available Productivity is always considered as one of the most basic and important factors to the competitiveness of a factory. For this reason, all factories have sought to enhance productivity. To achieve this goal, we first need to estimate the productivity. However, there is considerable degree of uncertainty in productivity. For this reason, a fuzzy collaborative forecasting approach is proposed in this study to forecast the productivity of a factory. First, a learning model is established to estimate the future productivity. Subsequently, the learning model is converted into three equivalent nonlinear programming problems to be solved from various viewpoints. The fuzzy productivity forecasts by different experts may not be equal and should therefore be aggregated. To this end, the fuzzy intersection and back propagation network approach is applied. The practical example of a dynamic random access memory (DRAM factory is used to evaluate the effectiveness of the proposed methodology.

Preliminary analysis of a target factory for laser fusion

International Nuclear Information System (INIS)

Sherohman, J.W.; Hendricks, C.D.

1980-01-01

An analysis of a target factory leading to the determination of production expressions has provided for the basis of a parametric study. Parameters involving the input and output rate of a process system, processing yield factors, and multiple processing steps and production lines have been used to develop an understanding of their dependence on the rate of target injection for laser fusion. Preliminary results have indicated that a parametric study of this type will be important in the selection of processing methods to be used in the final production scheme of a target factory

Beam transport of PF (Positron Factory) 2.5-GeV linac

International Nuclear Information System (INIS)

Shiraga, Takahiro; Asami, Akira; Suwada, Tsuyoshi; Kobayashi, Hitoshi.

1993-01-01

The beam transport is one of the most important problems in the linac to be used as the injector for the B-FACTORY accelerators. A basic problem of the beam transport is how to correct transport parameters immediately when a klystron becomes off. This is studied with the PF (Positron Factory) 2.5-GeV linac. (author)

The introduction of radiation monitor produced by several nuclear instrument factories

International Nuclear Information System (INIS)

Yu Liying

2005-01-01

The paper introduce some radiation monitor products of several nuclear instrument factories include Xi'an Nuclear Instrument Factory, MGP Instruments Inc, and Canberra Industries Inc. The introduction aspects include the range, configuration, and application of products. So, the paper is reference for the designer with responsibility for radiation monitoring system of new nuclear project. (authors)

The benefits and challenges of sharing glidein factory operations across nine time zones between OSG and CMS

CERN Document Server

Sfiligoi, Igor; Zvada, Marian; Butenas, Ignas; Holzman, Burt; Wuerthwein, Frank Karl; Kreuzer, Peter; Teige, Scott W.; Quick, Robert; Hernandez, Jose M.; Flix Molina, Jose

2012-01-01

OSG has been operating for a few years at UCSD a glideinWMS factory for several scientific communities, including CMS analysis, HCC and GLOW. This setup worked fine, but it had become a single point of failure. OSG thus recently added another instance at Indiana University, serving the same user communities. Similarly, CMS has been operating a glidein factory dedicated to reprocessing activities at Fermilab, with similar results. Recently, CMS decided to host another glidein factory at CERN, to increase the availability of the system, both for analysis, MC and reprocessing jobs. Given the large overlap between this new factory and the three factories in the US, and given that CMS represents a significant fraction of glideins going through the OSG factories, CMS and OSG formed a common operations team that operates all of the above factories. The reasoning behind this arrangement is that most operational issues stem from Grid-related problems, and are very similar for all the factory instances. Solving a probl...

Synchronous method and engineering tool for the strategic factory planning

OpenAIRE

Abdul Rahman, O.; Jaeger, J.; Constantinescu, C.

2011-01-01

This paper presents the approach to combine two reference methods and engineering tools, for "Factory Performance and Investment Planning«as well as "Value Added Ideal Production Network Planning". The resulted synchronous method aims to support factories in the strategic planning as well as in the network planning. The corresponding engineering tool is employed for assessment planning, sales planning, capacity planning and production costs planning under the consideration of dynamic and stoc...