WorldWideScience

Sample records for con laser infrarrojo

  1. El Retículo Endoplasmático Liso en Hepatocitos Estimulados con Distintas Dosis de Láser Infrarrojo

    OpenAIRE

    Cornejo, R; Garrido, O; Bustamante, C; Muñoz, M

    2014-01-01

    Veinticuatro ratas hembras Sprague Dawley de 4 meses de vida con peso aproximado de 250 g, fueron divididas en cuatro grupos (A, B, C y D), donde el grupo A (control) no recibió estimulación infrarroja, B se irradió con láser infrarrojo 4 J/cm², C con dosis de 8 J/cm² y D con 16 J/cm². La estimulación infrarroja se realizó diariamente, por 15 días ininterrumpidos. Las ratas fueron sacrificadas y se extrajeron muestras tanto de hígado normal (control) como estimulado con las distintas dosis in...

  2. Estudio comparativo entre fluorescencia de rayos X y reflectancia difusa de infrarrojos cercanos para la determinación de la retención en madera impregnada con arseniato de cobre cromatado

    OpenAIRE

    Baettig-Palma, Ricardo; Cornejo-Troncoso, Jorge; Salas-Maureira, Marina; Tapia-Sanhueza, Jaime

    2014-01-01

    Se realizó un análisis comparativo de la precisión de los resultados en la determinación de la retención de óxidos de cobre, cromo y arsénico en madera impregnada con arseniato de cobre cromatado entre fluorescencia de rayos X y espectrometría de reflectancia difusa de infrarrojos cercanos. Los resultados de la calidad de las predicciones fueron comparados entre sí y con valores de retención obtenidos experimentalmente por método gravimétrico, absorción atómica y por cenizas resultantes de su...

  3. Estudio comparativo entre fluorescencia de rayos X y reflectancia difusa de infrarrojos cercanos para la determinación de la retención en madera impregnada con arseniato de cobre cromatado

    OpenAIRE

    Baettig-Palma,Ricardo; Cornejo-Troncoso,Jorge; Salas-Maureira,Marina; Tapia-Sanhueza,Jaime

    2015-01-01

    Se realizó un análisis comparativo de la precisión de los resultados en la determinación de la retención de óxidos de cobre, cromo y arsénico en madera impregnada con arseniato de cobre cromatado entre fluorescencia de rayos X y espectrometría de reflectancia difusa de infrarrojos cercanos. Los resultados de la calidad de las predicciones fueron comparados entre sí y con valores de retención obtenidos experimentalmente por método gravimétrico, absorción atómica y por cenizas resultantes de su...

  4. Análisis funcional computarizado de espectros de infrarrojo

    Directory of Open Access Journals (Sweden)

    Augusto Rivera

    2009-07-01

    Full Text Available CALIPSO: Se discute un programa para microcomputador diseñado para asistir al espectroscopista en la Interpretación de espectro de Infrarrojo. Es un programa interactivo que utiliza la lógica booleana y árboles de decisión binaria definido por la presencia o ausencia, intensidad y forma de un pico específico en un espectro de infrarrojo. La Información relacionada con los grupos funcionales presentes en la molécula es confiable.

  5. Estudio de la contaminación con petróleo de los suelos agrícolas de la cuenca baja del río Tonalá mediante espectroscopia del infrarrojo cercano

    OpenAIRE

    Hernández Nataren, Lorena del Carmen

    2012-01-01

    El desarrollo de la industria petrolera en México ha generado contaminación en el entorno, ocasionada por derrames que afectan componentes del ecosistema donde se localiza su infraestructura. En la actualidad se desarrollan métodos modernos para estudiar la contaminación de suelos generada por el derrame de hidrocarburos derivados del petróleo. Los métodos instrumentales modernos (espectroscopia de infrarrojo cercano, cromatografía de gases, espectrometría de masas, espectroscopia UV-Vis, ...

  6. Interoperabilidad en Sistemas Domóticos Mediante Pasarela Infrarrojos-ZigBee

    Directory of Open Access Journals (Sweden)

    Gonzalo B. Asencio

    2011-10-01

    Full Text Available Resumen: La domótica consiste en la aplicación de técnicas provenientes de la automática industrial al hogar con objeto de ofrecer servicios que aporten, entre otras cosas, confort, seguridad y eficiencia energética a los usuarios. Hasta el momento la penetración de dichas técnicas en los hogares ha sido reducida. Una de las razones fundamentales de esta lenta transposición de técnicas de control al hogar es la dificultad de integración entre los diferentes sistemas presentes en el hogar. En este artículo se presenta un desarrollo encaminado a mejorar la integración de los sistemas domóticos con aquellos dispositivos que sean controlables mediante infrarrojos. En concreto se ha desarrollado una pasarela inalámbrica que permite a una red domótica el envío de tramas de infrarrojos. De esta manera se posibilita un despliegue rápido y económico de los nodos que sean necesarios para integrar dispositivos tales como los sistemas de aire acondicionado en una red domótica. Copyright c 2011 CEA. Publicado por Elsevier España, S.L. Todos los derechos reservados. Palabras clave: Control a través de redes de comunicación, Impacto social de la automática

  7. Mechanism of laser and rf plasma in vibrational nonequilibrium CO-N2 gas mixture

    International Nuclear Information System (INIS)

    Lou Guofeng; Adamovich, Igor V.

    2009-01-01

    This paper investigates the mechanism of plasma created by focused CO laser and rf electric field. The plasma is created in a CO/N 2 environment, at a total pressure of 600 torr. Ionization of the gases occurs by an associative ionization mechanism, in collisions of two highly vibrationally excited molecules. These highly vibrationally excited states are populated by resonance absorption of the CO radiation followed by anharmonic vibration-vibration (V-V) pumping. Moreover N 2 also becomes vibrationally excited due to collisions with vibrationally excited CO. The coupled rf reduced electric field E/N is sufficiently low to prevent electron impact ionization that may create plasma individually, so when a subbreakdown rf field is applied to the plasma, collisions between the free electrons heated by the field and the diatomic species create additional vibrational excitation both in the region occupied by the CO laser beam and outside of the laser beam region. The numerical results show plasma created in both regions (in and out of the CO laser beam region) with the associative ionization mechanism. This suggests a method for creating a stable nonequilibrium plasma. The calculation result is verified by comparison the synthetic spectrum to a measured one.

  8. Oscillating flux in petroleum emulsions irradiated with laser; Flujo oscilatorio en emulsiones de petroleo irradiadas con laser

    Energy Technology Data Exchange (ETDEWEB)

    Costa, G. Da; Parra, J.E.; Mosqueda, F. [Departamento de Fisica, Laboratorio de Optica y Fluidos, Universidad Simon Bolivar, Apartado Postal 89000, Caracas 1080-A, (Venezuela)]. e-mail: german@usb.ve; Romanelli, A.; Sicardi-Schifino, A. [Instituto de Fisica, Facultad de Ingenieria, Julio Herrera y Reissig 565, Montevideo, (Uruguay)]. e-mail alejo@fing.edu.uy

    2003-07-01

    Oil-in-water emulsions are irradiated with a Cw laser beam. A floating oil layer grows up in the water free surface. Laser-induced wave propagation in the oil layer gives rise to space-time self-modulation of the reflected light beam. A theoretical model explains main features of observed phenomena. (Author)

  9. The con focal laser scanning microscope: a powerful tool for the investigation of micro devices and nano structures

    International Nuclear Information System (INIS)

    Montereali, R.M.; Baldacchini, G.; Bonfigli, F.; Vincenti, M.A.; Almaviva, S.

    2008-01-01

    In the last years the Con focal Laser Scanning Microscope (CLSM), a versatile and powerful optical instrument, gained a strong increase of interest in the scientific community, not only for biological applications, but also for the characterization of materials, microstructures and devices. The conditions that favoured its wide diffusion are surely the large availability of laser sources and powerful computer-imaging and data-processing systems at relatively low cost; however, the main reason that contributed to its popularity is the ability to obtain tri dimensional reconstruction of a great variety of biological and non-biological samples with sub micrometric resolution. In this report we show the main properties and characteristics of the Con focal Microscope Nikon Eclipse 80-i C1, which has operated sinc more than two years in the Solid State Laser and Spectroscopy Laboratory of the ENEA Research Center in Frascati. Some of the results obtained in the characterization of luminescent micro and nano structures based on lithium fluoride color centers will be presented [it

  10. Determinación del coeficiente piroeléctrico del sistema ferroeléctrico cerámico de Pb0.88Ln0.08Ti0.98Mn0.02O3 (Ln=La, Sm, Eu y su aplicación en detectores de infrarrojo

    Directory of Open Access Journals (Sweden)

    Suaste-Gómez, E.

    2004-12-01

    Full Text Available In this work the dielectric and pyroelectric characteristics of the ferroelectric ceramic system of Pb0.88(Ln0.08Ti0.98Mn0.02O3 (Ln = La, Sm, Eu are studied in order to determine its usefulness as infrared dectectors. Dielectric constant and pyroelectric coefficient of the ceramics were determined. This material with perovskite structure presented a phase transition from tetragonal to cubic on the heating process, besides of presenting high values of dielectric constant. Values of figure of merit for infrared detection Rv=pi/εr were calculated. The results were compared with other materials used as infrared detectors.En este trabajo se estudian las características dieléctricas y piroeléctricas del sistema ferroléctrico cerámico de Pb0.88(Ln0.08Ti0.98 Mn0.02O3 (Ln = La, Sm, Eu para determinar su utilidad como detectores de infrarrojo. Se determinó la constante dieléctrica y el coeficiente piroeléctrico de las cerámicas. Este material con estructura de perovskita presentó una transición de fase tetragonal a cúbica en el proceso de calentamiento, además de presentar altos valores de la constante dieléctrica. Se obtuvieron valores de la figura de mérito para detección infrarroja Rv=pi/εr Los resultados se compararon con otros materiales usados como detectores de infrarrojo.

  11. Trabeculoplastia selectiva con láser en glaucoma Selective laser trabeculoplasy in the treatment of glaucoma

    Directory of Open Access Journals (Sweden)

    Ailen Garcés Fernández

    2009-12-01

    Full Text Available Se realiza una breve revisión bibliográfica sobre la trabeculoplastia selectiva con Nd YAG Láser de frecuencia doblada en la enfermedad glaucomatosa. El equipo Laserex Tango LT 5106-T Nd: YAG Láser (Ellex Medical Pty Ltd para trabeculoplastia selectiva se encuentra en nuestro instituto desde marzo de 2006, única institución del país que dispone de este equipo hasta este momento. La alta esperanza de vida de nuestra población, que conlleva a un incremento en la incidencia de glaucoma y cataratas, induce a ser consecuentes con todo aquello que contribuya a mejorar la calidad de vida de los pacientes: esta circunstancia motivó esta revisión. Se presentan sus indicaciones, parámetros más utilizados, efectividad y complicaciones.A brief literature review on selective trabeculoplasty with doubled frequency Nd:YAG laser in the treatment of glaucoma was made. Laserex Tango LT 5106-T Nd: YAG Laser (Ellex Medical Pty Ltd equipment for selective trabeculoplasty is available in our institute since March 2006 (the only center having this equipment in our country up to the present. The high life expectancy of our population, with an increase of glaucoma and cataract incidence, prompts us to be consistent with everything that supports the improved quality of life of patients; this was the reason for this review. Indications, most used parameters, effectiveness and complications were presented.

  12. The Use of Laser Microdissection in Forensic Sexual Assault Casework: Pros and Cons Compared to Standard Methods.

    Science.gov (United States)

    Costa, Sergio; Correia-de-Sá, Paulo; Porto, Maria J; Cainé, Laura

    2017-07-01

    Sexual assault samples are among the most frequently analyzed in a forensic laboratory. These account for almost half of all samples processed routinely, and a large portion of these cases remain unsolved. These samples often pose problems to traditional analytic methods of identification because they consist most frequently of cell mixtures from at least two contributors: the victim (usually female) and the perpetrator (usually male). In this study, we propose the use of current preliminary testing for sperm detection in order to determine the chances of success when faced with samples which can be good candidates to undergo analysis with the laser microdissection technology. Also, we used laser microdissection technology to capture fluorescently stained cells of interest differentiated by gender. Collected materials were then used for DNA genotyping with commercially available amplification kits such as Minifiler, Identifiler Plus, NGM, and Y-Filer. Both the methodology and the quality of the results were evaluated to assess the pros and cons of laser microdissection compared with standard methods. Overall, the combination of fluorescent staining combined with the Minifiler amplification kit provided the best results for autosomal markers, whereas the Y-Filer kit returned the expected results regardless of the used method. © 2017 American Academy of Forensic Sciences.

  13. Usos del rayo Laser en Odontologia restauradora: Primera parte. Aspectos generales, clasificacion, interrelacion con los tejidos vivos y precauciones en el uso

    OpenAIRE

    Natera G, Alfredo E.

    2000-01-01

    Con este artículo se pretende dar comienzo a una serie de publicaciones para así plasmar todo lo relacionado con el uso de la tecnología Laser en la Odontología Restauradora. En este primer artículo leerá sobre los antecedentes y fundamentos físicos del Rayo Laser, la clasificación y tipos de Laser disponibles para ésta área de la Odontología, su interrelación con los tejidos vivos, así como las precauciones a tomar durante su uso. En las siguientes publicaciones se esta serie leeremos las pa...

  14. [The pros and cons of femtosecond laser-assisted cataract surgery].

    Science.gov (United States)

    Li, Z H; Ye, Z

    2016-02-01

    Femtosecond laser-assisted cataract surgery (FLACS) is known as an innovative new technology. Compared with traditional surgical approach, FLACS is more accurate, more predictable and less energy used. However, in the current stage of development, there still may be intraoperative and postoperative complications, or even serious complications. FLACS has obvious advantages in certain surgical steps, but there are still clear disadvantages, so it still cannot completely replace the traditional phacoemulsification surgery.

  15. Control by hardware of government systems for laser diodes with STM32F4 and Peltier cells; Control por hardware de sistemas de gobierno para diodos laser con STM32F4 y celdas Peltier

    Energy Technology Data Exchange (ETDEWEB)

    Ulloa Solano, Natalia Irina

    2013-07-01

    A low cost prototype of a government system is developed for laser diodes with STM32F4 microcontrollers and Peltier cooling. Commercial and homemade government system (with STM32F4 microcontrollers ) are investigated with the objective of adequately control the current of a laser diode. Characteristics of STM32F4 microcontrollers are described. The low cost platforms as the Arduino and Raspberry Pi are compared. A bibliographical and documentary compilation is realized for the preliminary study of the components and tools to use in the prototype. The theory related with the heat transfer between a laser diode and the outside, and a Peltier cell and outside is summarized. A heat dissipation model is proposed of a system formed by a laser diode and Peltier cell. A control system of current and fed back temperature is designed and implemented to allow adequately control laser diodes without and with photodiode (2 pickups and 3 pickups respectively). The viability of control with free software is studied and corroborated. The temperature control of the laser diode using a Peltier cell as cooler has been possible through a simple control of ON/OFF mode. The integration of devices such as ADC, DAC, timers and facilities of STM32F4 microcontroller, have allowed to optimize costs by hardware, save time and costs. Also, the incorporation of the Cortex-M4 processor has optimized the consumption of operational resources and has executed much of its instruction set of efficient way. Because of this, the project has complied with its maximum as to low cost is concerned [Spanish] Un prototipo de bajo costo de un sistema de gobierno es desarrollado para diodos laser con microcontroladores STM32F4 y enfriamiento con Peltier. Los sistemas de gobierno comerciales y caseros (con microcontroladores STM32F4) son investigados con el objetivo de controlar adecuadamente la corriente de un diodo laser. Las caracteristicas de los microcontroladores STM32F4 son descritas. Las plataformas de

  16. Evaluación clínico-citológica del herpes labial tratado con láser

    Directory of Open Access Journals (Sweden)

    Teresa García Sánchez,

    2001-08-01

    Full Text Available Se realizó un estudio descriptivo, longitudinal y prospectivo consistente en la descripción citológica y clínica de las muestras obtenidas en 150 pacientes con herpes labial diagnosticadas y atendidas en las diferentes consultas, que reunieron criterios de inclusión objetivos y subjetivos. Las muestras obtenidas por raspado de la superficie afectada se fijaron con cytospray y se colorearon con el método de Papanicolau; fueron leídas al inicio y a las 48 horas para evaluar la recuperación de la mucosa bajo los efectos del láser infrarrojo de arsenurio de galio y aluminio en dosis de 0,6 J/cm2 durante 1 minuto, para un total de 2 a 3 sesiones. Las células intermedias de las mucosas mostraron el mayor nivel de multiplicación, la recuperación fue identificada a partir de las 48 horas de evaluación citológica, clínicamente al 4to. día. Se recomienda evaluar la eficiencia del nuevo esquema terapéutico con láser para esta afección, así como su costo y efectividad.A descriptive, longitudinal and prospective study consisting in the cytological and clinical description of the samples obtained in 150 patients with herpes labialis diagnosed and seen in different consultation rooms was conducted. Objective and subjective inclusion criteria were gathered. The samples of the affected surfaces obtained by curettage were fixed with cytospray and they were colored by using Papanicolau’s method. They were read at the beginning and 48 hours later to evaluate the recovery of the mucosa under the effects of the infrared laser of gallium and alluminum arsenide at doses of 0.6 J/cm3 during a minute for a total of 2 or 3 sessions. The intermediate cells of the mucosas showed the highest level of multiplication. The recovery was identified 48 hours after the cytologic evaluation and from the clinical point of view on the 4th day. It was recommended to evaluate the efficiency of the new therapeutic scheme with laser to treat this affection, as well

  17. ESTUDIO SINTÉTICO Y CARACTERIZACIÓN POR INFRARROJO DE DERIVADOS 2-(AMINO-1,4-NAFTOQUINONA Y SU EVALUACIÓN ANTIBACTERIANA PRELIMINAR

    Directory of Open Access Journals (Sweden)

    Marlene Lariza Andrade-Guel

    2011-01-01

    Full Text Available Las naftoquinonas son compuestos de origen natural o sintético que han mostrado importantes actividades biológicas, resaltando como agentes antibacterianos, antifúngicos, antimaláricos y anticancerígenos. En el presente trabajo se reportan los resultados de la síntesis utilizando diferentes métodos como la síntesis a temperatura ambiente (STA, síntesis por calentamiento convencional (SCC y síntesis asistida por ultrasonido (SAU de los derivados 2-(amino-1,4-naftoquinona. Se realizó su caracterización por espectroscopía de infrarrojo. Además se determinó su capacidad como agentes antibacterianos frente a las cepas Proteus sp. y Enterococcus faecalis. La mayor actividad lo mostró el derivado 2-bencilamino 1,4-naftoquinona.

  18. Aplicabilidad de la termometría digital por infrarrojos en la valoración vascular del pie

    OpenAIRE

    Rayo Rosado, Rafael

    2009-01-01

    La temperatura corporal es un parámetro muy utilizado a la hora de establecer un juicio clínico en diversos procesos patológicos. La medición de la temperatura con fines diagnósticos o termometría clínica, es sin duda una de las pruebas complementarias más frecuente que se realiza en los procesos de salud. Al hablar de termometría, se nos viene a la cabeza el uso de termómetros con la finalidad de conocer la temperatura corporal del sujeto y determinar si existen procesos febriles. Sin embarg...

  19. Seguridad del paciente en la cirugía refractiva con láser Safety of the patients in the refractive surgery with laser

    Directory of Open Access Journals (Sweden)

    Yureisi Labarrere Cruz

    2012-06-01

    Full Text Available Objetivo: Describir aspectos relacionados con la seguridad del paciente en la cirugía refractiva con láser y enumerar las medidas para disminuir el riesgo de complicaciones. Métodos: Se realizó un estudio descriptivo transversal. El universo de estudio y la muestra se conformó por 11 720 ojos correspondientes a 5 955 pacientes que fueron intervenidos de cirugía refractiva con láser de excímeros entre los años 2005 y 2009 en el salón de cirugía refractiva del Instituto Cubano de Oftalmología "Ramón Pando Ferrer". Los datos se presentaron en tablas y gráficos, procesados en el paquete estadístico Statgraph Plus 50. Resultados: El número de ojos operados tuvo un aumento progresivo y su mayor representación en los años 2008 y 2009 (24,5 % y 25,1 %, respectivamente. Las complicaciones representaron 0,74 % del total de ojos intervenidos y con tendencia a la disminución en el tiempo. Conclusión: Existe un aumento en la demanda de la cirugía refractiva por láser en nuestro medio para la corrección de los defectos refractivos. Es necesario cumplir un conjunto de medidas que disminuyen la presencia de complicaciones, así se brinda mayor seguridad al paciente.Objective: To Identify and to describe aspects of the patient's safety in the refractive surgery with laser, as well as the measures to reduce the risk of complications. Methods: A cross-sectional descriptive study was undertaken. The universe of study was the sample of 11 720 eyes from 5 955 patients who had undergone refractive surgery with excímer laser from 2005 to 2009 in Refractive Surgery service of ¨Ramón Pando Ferrer¨ Cuban Institute of Ophthalmology. Data was processed by Statgraph Plus 50 package and presented in charts and graphics. Results: The number of operated eyes progressively increased and the biggest figure was reached in 2008 and 2009, accounting for 24.5% and 25.1% respectively. The complications occurred in 0.74 % of the total of operated eyes, with a

  20. La terapia láser de baja potencia en la medicina cubana Low potency laser therapy in Cuban medicine

    Directory of Open Access Journals (Sweden)

    Adel Hernández Díaz

    2008-06-01

    Full Text Available El surgimiento y desarrollo del láser fue posible gracias a los avances previamente logrados en otras disciplinas científicas en el pasado siglo. Desde el punto de vista práctico puede ser considerado como un haz estrecho de luz monocromática y coherente que puede encontrarse en el rango visible, infrarrojo o ultravioleta del espectro de las radiaciones electromagnéticas. Motivados por la incorporación de los equipos láser de producción nacional en las salas de rehabilitación de los policlínicos universitarios de la atención primaria y otros centros de salud del país, nos dimos a la tarea de realizar este trabajo, cuyo objetivo fundamental es presentar las distintas aplicaciones del láser de baja potencia en la medicina, y los equipos láser cubanos disponibles en la red nacional de salud pública. Además se muestran los efectos terapéuticos de la radiación láser y los mecanismos internos para lograrlos, y se detallan ampliamente las contraindicaciones de la terapia. Este tipo de tratamiento ofrece muchas posibilidades de ayuda terapéutica y permite ser utilizado con éxito en patologías de diversas especialidades. La terapia láser constituye un tratamiento de primera línea para muchas de las afecciones con que acuden los pacientes a consulta médica.The appearance and development of laser was possible thanks to the advances previously attained in other scientific disciplines in the last century. From the practical point of view, it may be considered as a narrow monochromatic and coherent beam of light that may be found in the visible infrared or ultraviolet range of the spectrum of electromagnetic radiations. Motivated by the introduction of the laser equipment of national production into the rehabilitation wards of the teaching polyclinics and other health centres of the country, we made this paper aimed at presenting the different applications of low potency laser in the medical sphere, as well as the Cuban laser

  1. Laser heat treatment of steel cutting blades for agricultural uses; Tratamiento termico con laser de cuchillas de acero para uso agricola

    Energy Technology Data Exchange (ETDEWEB)

    Muniz, G.; Conde, A.; Fernandez, B. J.; Varela, R.; Garcia, I.; Damborenea, J. de

    2003-07-01

    The present paper focuses on the laser surface treatment of mild steels with different %wt of carbon to be used as cutting blades in agricultural applications. The results are discussed in function of the metallographic study, hardness profiles, wear resistance and corrosion testing. Special attention is paid to the results of the results obtained with the experimental steel with carbon 0.33 %wt because it is a new promising materials specifically developed to be applied in such agricultural uses. Metallographic studies showed three well defined regions: the laser treated zone, where solid state phase transformation occurs, the heat affected zone (HAZ) with partial transformations and finally the bulk metal with the original microstructure. Surface hardness was in all cases higher than the base steel in a depth range 600 {mu}m. Wear resistance is notably improved with laser heat treatment while no detrimental effects were induced in their specific corrosion resistance. (Author) 16 refs.

  2. Detección de Eurhizococcus colombianus (Hemiptera: Margarodidae en mora por espectroscopía del infrarrojo cercano

    Directory of Open Access Journals (Sweden)

    Elizabeth Meneses

    2015-07-01

    Full Text Available La selección de métodos apropiados para muestreo y análisis es un aspecto importante en el estudio de plagas subterráneas. El conocimiento de su biología, depende del uso de herramientas sensibles para su detección en el ambiente complejo del suelo y las raíces. Recientemente se ha propuesto el uso de espectroscopia infrarroja cercana (conocida como NIR, por su sigla en inglés para el diagnóstico fitosanitario no destructivo en cultivos, aprovechando la manifestación de propiedades ópticas únicas para cada grupo de plantas y organismos. El objetivo de este trabajo fue evaluar el uso de espectroscopía NIR en muestras de hojas y suelo rizosférico, para detectar la presencia del insecto subterráneo Eurhizococcus colombianus en cultivos de mora (Rubus glaucus Benth., en la región del Oriente antioqueño. La información obtenida en siete fincas distribuidas en cinco municipios indica que a través de los patrones espectrales de las hojas y el suelo rizosférico es posible clasificar las plantas con presencia o ausencia del insecto dentro de cada finca. Sin embargo, no fue posible establecer un modelo general para todas las fincas. Los resultados obtenidos permiten vislumbrar una herramienta no destructiva muy promisoria para detectar el insecto y entender las condiciones asociadas con su presencia en el cultivo, lo que favorecería el diseño de estrategias de manejo de este tipo de plaga, con base en el conocimiento de su ecología, ayudando así a la toma de decisiones ambientalmente amigables, razonables y oportunas por parte de los agricultores

  3. Laser desensitization of austenitic stainless steel weld AHZ. Desensibilizacion con Laser de la zona afectada por el calor (ZAC) en aceros inoxidables austeniticos

    Energy Technology Data Exchange (ETDEWEB)

    Lee, C.H.; Kim, K.C.; Chang, R.W. (Welding Research Center Research Institute of Industrial Science and Technology, Pohang (Korea, Republic of))

    1994-01-01

    This paper addressed the fundamental understanding of sensitization phenomena in the weld HAZ of austenitic stainless steel and a method of desensitization utilizing LASER, without degradation of other corrosion resistance (pitting resistance). Sensitization in the weld HAZ was due to a formation of CR depleted zone along grain boundaries and twin boundaries by precipitation of Cr[sub 2]3C[sub 6] which contains 70-80% Cr and a small amount of Fe having a cubic-cubic relationship with the austenite matrix. Common morphologies of carbides were found to be of bar and globular shapes. As the holding time increased, carbides with coarsened globular (iodomorph) and dendrite shapes were also found. However, there was no significant variation in the composition of carbides and width of the Cr depleted zone with morphology. Laser desensitization could be obtained with a proper choice of the beam power and travel speed under a constant beam size. As long as the beam density reached a critical amount, carbides and Cr depleted zone completed zone completely disappeared. The critical travel speed increased with higher beam power, but was constant regardless of the original degree of sensitization. Pitting resistance of the LASER desensitized base metal and HAZ appeared to be far superior to that found in the sensitized condition. The protection potential in the hysteresis loop test was very sensitive to the degree of sensitization, revealing that the protection potential was dependent upon the propagation of the pits through the Cr depleted grain boundaries. (Author) 10 refs.

  4. Tratamiento del rinofima con láser de CO2: Presentación de un caso Treatment of rhinophyma with CO2 laser: A case report

    Directory of Open Access Journals (Sweden)

    J.L. Cebrián Carretero

    2006-04-01

    Full Text Available Introducción. El rinofima es una alteración cutánea de la región nasal que produce problemas estéticos importantes. Describimos nuestra experiencia en un caso de rinofima avanzado y su resolución por medio de una técnica sencilla. Material y métodos. Previa desinfección cutánea se realizó anestesia infiltrativa y bloqueo troncular de nervios infraorbitarios y etmoidales. A continuación se realizó la resección de casi todo el espesor cutáneo con un láser de CO2 Lumenis Sharplan conservando la dermis profunda para permitir la curación por segunda intención. Posteriormente se aplicó vaselina y se realizaron curas y lavados diarios. El paciente fue dado de alta al día siguiente de la intervención. Resultados. Los resultados estéticos fueron muy buenos. El dolor postoperatorio fue controlado con analgesia habitual. En la primera semana se objetivaba un buen grado de cicatrización. A los 2 meses la reepitelización fue completa y ya no se observaban costras ni eritema. Conclusión. La utilización del láser de CO2 en el tratamiento del rinofima avanzado logra unos excelentes resultados estéticos con una morbilidad y riesgo operatorio mínimos.Introduction. Rhinophyma is a skin alteration of the nasal region that causes considerable aesthetic problems. We describe our experience with a case of advanced rhinophyma and its resolution by means of a simple technique. Materials and methods. The skin area was disinfected beforehand, anaesthesia infiltration and the infraorbital and ethmoidal nerve trunks were blocked. Then, using a Lumenis Sharplan CO2 laser almost the complete skin thickness was resected while preserving the deep dermis layer so as to allow second intention healing. Later, Vaseline was applied and the area was treated daily. The patient was discharged the day after the intervention. Results. The aesthetic results were very good. Postoperative pain was controlled with standard analgesics. Adequate healing was

  5. Caracterización de las cirugías palpebrales con láser de CO2 Characterization of the eyelid surgery with CO2 laser

    Directory of Open Access Journals (Sweden)

    Lázara Kenia Ramírez García

    2012-06-01

    Full Text Available Objetivo: Determinar la caracterización de las cirugías palpebrales con láser de CO2. Métodos: Estudio observacional, descriptivo, longitudinal prospectivo, cuya muestra estuvo constituida por 93 pacientes (136 ojos operados con láser de dióxido de carbono en el Servicio de Oculoplastia del Instituto Cubano de Oftalmología "Ramón Pando Ferrer" desde enero a octubre de 2009. Resultados: Según el sexo, 40 eran femeninos y 53 masculinos. Por edad, de 20 a 39 años, 9,7 %; de 40 a 59, 15 %; de 60 a 79, 48,4 %; y más de 80 años, 23,7 %. La piel tipo I se presentó en el 53,8 % de los pacientes, el tipo II en 33,3 %. El láser se utilizó como instrumento de corte y coagulación en la dermatochalasis (31,6 % y en el ectropión (20,6 %. Como escáner en 11 queratosis seborreicas. El 94,6 % no mostró complicaciones, solo 5 pacientes. Conclusiones: Este equipo se utilizó en múltiples afecciones anexiales. La técnica quirúrgica transcutánea predominó en más de la mitad de los pacientes con dermatochalasis y la fijación cantal externa en las anomalías de posición. Las complicaciones fueron mínimas y la retracción cicatrizal fue la más frecuente.Objective: To determine the behavior of eyelid surgery with CO2 laser. Methods: A prospective, longitudinal, observational and descriptive study whose sample consisted of 136 eyes from 93 patients, who underwent carbon dioxide laser surgery at the oculoplasty service of "Ramón Pando Ferrer" Cuban Institute of Ophthalmology from January to October, 2009. Results: Of the total number of patients, 40 were females and 53 males; 9.7% aged 20 to 39 years, 15% aged 40 to 59 years; 48.4 % were 60 to 79 years and 23.7% over 80 years. Skin type I was present in 50 patients (53,8 %, and type II in 33,3 % of cases. C02 laser was used for cutting and coagulation in dermatochalasis, accounting for 31.6% and in ectropion for 20,6 %. As a scanner it was used in 11 seborrheic keratoses. No complications

  6. Lasers

    CERN Document Server

    Milonni, Peter W

    1988-01-01

    A comprehensive introduction to the operating principles and applications of lasers. Explains basic principles, including the necessary elements of classical and quantum physics. Provides concise discussions of various laser types including gas, solid state, semiconductor, and free electron lasers, as well as of laser resonators, diffraction, optical coherence, and many applications including holography, phase conjugation, wave mixing, and nonlinear optics. Incorporates many intuitive explanations and practical examples. Discussions are self-contained in a consistent notation and in a style that should appeal to physicists, chemists, optical scientists and engineers.

  7. VIDRIADO CON LÁSER DE Nd: YAG SOBRE AZULEJOS RECUBIERTOS DE BARNICES DE COBALTO CON FRITA BORÁCICA Y SIN FRITA VIDRADO COM Laser De Nd: YAG SOBRE AZULEJOS RECOBERTOS DE VERNIZES DE COBALTO COM FRITA BORÁCICA E SEM FRITA Nd: YAG LASER ENAMELING ON GLAZED TILES COATED WITH COBALT VARNISHES WITH AND WITHOUT BORAX FRIT

    Directory of Open Access Journals (Sweden)

    Maryory Astrid Gómez

    2010-07-01

    Full Text Available Las industrias de materiales cerámicos y arquitectónicos emplean diferentes técnicas de marcado con dos aplicaciones clásicas, para identificación y decoración de piezas elaboradas. La utilización de técnicas láser para estos propósitos se viene implementando de forma creciente, debido a las ventajas que presenta respecto al horneado convencional: la concentración del calor sólo en la zona irradiada, lo que conlleva un menor consumo de energía sin afectar significativamente el resto de la pieza; se obtienen patrones gráficos de alta resolución espacial; permite introducir cambios durante el proceso sin requerir largas paradas, y la generación de residuos es mínima o casi nula. En este estudio se presentan los resultados obtenidos en el vidriado con láser Nd:YAG (l=1064 nm sobre las superficies esmaltadas de azulejos, las cuales fueron previamente recubiertas con pigmento cerámico negro de cobalto y un barniz constituido por este mismo pigmento y frita borácica. Con el láser operando en modo continuo (CW, se marcaron una serie de líneas, cuyo ancho y profundidad evidenciaron una dependencia directa, con la variación de la potencia y velocidad de desplazamiento del haz láser sobre la superficie del azulejo. Finalmente estas líneas vidriadas fueron analizadas por microscopía óptica, espectroscopia de dispersión de energía (EDS y difracción de rayos X.As indústrias de materiais cerâmicos e arquitetônicos empregam diferentes técnicas de marcado com duas aplicações clássicas, para identificação e decorações de peças elaboradas. A utilização de técnicas laser para estes propósitos se vem executando de forma crescente, devido às vantagens que apresenta respeito ao assado convencional: concentração do calor só na zona irradiada, o que comporta um menor consumo de energia sem afetar significativamente o resto da peça; obtêm-se patrões gráficos de alta resolução espacial; permite introduzir mudan

  8. Evaluación citológica de la papilomatosis incipiente del paladar tratada con láser en portadores de prótesis

    Directory of Open Access Journals (Sweden)

    Milagros Calzado de Silva

    2002-04-01

    Full Text Available Se realizó un estudio prospectivo y longitudinal, consistente en la descripción citológica (tipo celular, porcentaje y variaciones del núcleo, citoplasma y fondo de lámina de las muestras obtenidas en 20 pacientes con papilomatosis incipiente del paladar duro, diagnosticados y atendidos en la consulta de Detección Precoz del Cáncer Bucal de la Clínica Estomatológica Provincial Docente de Santiago de Cuba, que reunieron criterios de inclusión para dicha entidad. Las muestras obtenidas por raspado a ambos lados de la mucosa fueron leídas al inicio del tratamiento a los 3, 6, 9, 12, 15 y 18 días para evaluar la recuperación epitelial bajo los efectos del láser infrarrojo de arsenurio de galio y aluminio, con dosis de 6 J/cm2 durante 12 a 15 sesiones. Las células intermedias de la mucosa mostraron el mayor nivel de multiplicación, la recuperación epitelial, según promedio de cambio celular, resultó más rápida en los casos de menos números de sesiones y el tiempo medio de recuperación fue indicado en esta muestra a partir del tercer día de evaluación citológica.A prospective longitudinal study consisiting in the cytological description (cellular type, percentage and variations of the nucleus, citoplasma and laminar fundus of the samples obtained from 20 patients with incipient papillomatosis of the hard palate that were diagnosed and treated at the Consulting Room of Early Detection of Oral Cancer of the Provincial Teaching Dental Clinic, in Santiago de Cuba, was conducted. Inclusion criteria were gathered for this entity. The samples obtained by curettage on both sides of the mucosa were read at the beginning of the treatment at 3,6, 9, 12, 15 and 18 days to evaluate the epithelial recovery under the effects of the infrared laser of gallium and alluminum arsenid at doses of 6 J/cm3 during 12 to 15 sessions. The intermediate cells of the mucosa showed the highest level of multiplication. The epithelial recovery according to

  9. Cambios en las propiedades luminiscentes de un feldespato potásico inducidos por efecto térmico y exposición a infrarrojo

    Directory of Open Access Journals (Sweden)

    Correcher, V.

    2004-02-01

    Full Text Available Luminescence properties of quartz and feldspars, main components of traditional ceramic materials (bricks, tiles or porcelains, change considerably during the manufactured process that involves a heating treatment up to ∼900ºC (bricks or ∼1200ºC (porcelains. The aim of this paper is the study of the change the luminescence properties of a well characterised K-rich feldspar (KAlSi3O8 when (i thermal treatment and (ii infrared exposure are performed. It could be appreciated an increase in the intensity of the radioluminescence (RL and cathodoluminescence (CL curves when progressive thermal treatment at 500oC from 2h to 96h are applied. No significant changes in the shapes of the curves could be detected. As no structural changes have been detected by X-ray diffraction, the change in the sensitivity of the curve can be due to selfdiffusion of alkali (K, Li, Na or Rb through the lattice and interphases. On the other hand, the feldspar blue thermoluminescence (TL emission is slightly shifted towards high temperature when is previously exposed to infrared luminescence for 10 minutes. Probably this effect is a consequence of an electronic transition from shallower to deeper traps by tunnelling or a continuum in the trap distribution.

    Las propiedades luminiscentes del cuarzo y de los feldespatos, que son componentes mayoritarios de los materiales cerámicos tradicionales (ladrillos, azulejos o porcelanas, varían considerablemente durante el proceso de fabricación que implica un calentamiento hasta ∼900ºC en ladrillos o ∼1200ºC en porcelanas. En este trabajo se ha estudiado como varía la luminiscencia de un feldespato potásico (KAlSi3O8 perfectamente caracterizado cuando es sometido a (i tratamientos térmicos y (ii exposición al infrarrojo. Se ha observado que calentamientos progresivos desde 2 hasta 96 horas a una temperatura de 500ºC producen un aumento proporcional de la intensidad en las curvas de radioluminiscencia (RL y

  10. Interstitial laser photocoagulation in the treatment of liver tumors. Personal technique, short term results and complications in patients with normal and impaired liver function; Fotocoagulazione laser-interstiziale ecoguidata dei tumori maligni del fegato: tecnica personale, risultati immediati e complicanze a breve termine nei pazienti con funzionalita' epatica normale e alterata

    Energy Technology Data Exchange (ETDEWEB)

    Giorgio, A.; Tarantino, L.; De Stefano, G.; Farella, N. [Azienda Ospedaliera D. Cotugno, Naples (Italy). Servizio di Ecografia ed Ecointerventistica; Catalano, O.; Cusati, B. [Ospedale S. Maria delle Grazie, Pozzuoli, NA (Italy). Servizio di Radiologia; Alalia, A. [Azienda Ospedaliera D. Cotugno, Naples (Italy). Servizio di Anestesia e Rianimazione; Del Vescovo, L. [Naples Univ. II, Naples (Italy). Ist. di Radiologia

    2000-04-01

    The work reports the personal experience with interstitial laser photocoagulation in patients with liver tumors (mostly cirrhotics with hepatocellular carcinoma). The aim was to evaluate the short term efficacy of percutaneous interstitial laser photocoagulation in inducing focal ablation of liver tumors and the possible complications in patients with normal and impaired liver function. [Italian] Il presente lavoro riporta l'esperienza personale con l'utilizzazione della fotocoagulazione laser-interstiziale per tumori maligni del fegato, rappresentati in gran parte da epatocarcinomi in cirrosi. Lo scopo e' quello di verificare l'efficacia terapeutica in termini di volume di necrosi e di valutare gli effetti collaterali e le complicanze a breve termine sulla riserva funzionale del fegato e di altri organi, soprattutto nei pazienti con alterata funzionalita' epatica.

  11. Prediction of the Chemical Composition and Fermentation Parameters of Pasture Silage by Near Infrered Reflectance Spectroscopy (NIRS Predicción de la Composición Química y Parámetros Fermentativos de Ensilajes de Pradera Mediante Espectroscopía de Reflectancia en el Infrarrojo Cercano (NIRS

    Directory of Open Access Journals (Sweden)

    Lorena Ibáñez

    2008-12-01

    Full Text Available The capability of near infrared reflectance spectroscopy (NIRS was evaluated to predict the content of total ash (TA, crude protein (CP, crude fiber (CF, neutral detergent fiber (NDF, acid detergent fiber (ADF and metabolizable energy (ME; as well as pH and ammonia nitrogen content (N-NH3, in pasture silage, with and without additives. Nine hundred and twenty dried and ground samples of pasture silage, with known chemical composition, were scanned over the visible and NIR region (400 to 2500 nm at 2 nm intervals. Calibration equations were developed by modified partial least square regression models (MPLS with different mathematical treatments and light scatter correction as standard normal variation and Detrend (SNV & D of the spectra. For each parameter, the optimum calibration was evaluated on the basis of the cross validation determination coefficient (1-VR and standard error of cross validation (SECV. NIRS showed a high predictive ability, with 1-VR > 0.89 and SECV (% of 5.14, 6.69, 9.96, 16.01 and 9.15 for A, CP, CF, NDF and ADF, respectively. NIRS showed moderate accuracy for ME, with 1-VR > 0.87, SECV: 0.07 Mcal kg-1 and low accuracy, although with feasibility as a ranking method, for pH and N-NH3, with 1-VR > 0.72 and SECV of 0.14 and 1.49, respectively. It is concluded that the equations obtained can be used to predict the nutritional composition of pasture silages.Se evaluó la capacidad de la espectroscopía de reflectancia en el infrarrojo cercano (NIRS para predecir la composición química: cenizas totales (CT, proteína cruda (PC, fibra cruda (FC, fibra detergente neutro (FDN, fibra detergente ácido (FDA, energía metabolizable (EM y parámetros fermentativos: pH y nitrógeno amoniacal (N-NH3, en ensilajes de pradera con y sin aditivos. Se tomaron espectros (400 a 2500 nm, cada 2 nm de muestras secas y molidas (n = 920 de ensilajes de pradera con composición química conocida. Se desarrollaron calibraciones evaluando diferentes

  12. Trabeculoplastia selectiva con láser en glaucoma primario de ángulo cerrado Use of selective laser trabeculoplasty in primary closed angle glaucoma

    Directory of Open Access Journals (Sweden)

    Ailen Garcés Fernández

    2010-06-01

    Full Text Available OBJETIVOS: Determinar eficacia y seguridad de la trabeculoplastia selectiva láser en pacientes portadores de glaucoma primario de ángulo cerrado, operados de cataratas y/o glaucoma, e identificar la frecuencia de los principales efectos adversos. MÉTODOS: Investigación observacional descriptiva prospectiva en 35 pacientes (50 ojos portadores de glaucoma primario de ángulo cerrado sometidos a cirugía de cataratas y/o glaucoma, en el Instituto Cubano Oftalmológico "Ramón Pando Ferrer" entre mayo y noviembre de 2007. Se utilizó equipo Tango LT 5106-T, de Laserex. RESULTADOS: Predominaron pacientes femeninas, mayores de 60 años y piel no blanca, hipermétropes, elevada frecuencia de enfermedades crónicas no transmisibles. Se logró un 41,2 % de reducción de la presión intraocular a los 6 meses. La técnica en pacientes con antecedentes de cirugía filtrante previa mostró resultados muy similares a los no intervenidos. La terapia mostró efectividad en 88 % de los ojos, se logró disminuir la terapia médica hipotensora. Eventos adversos: picos tensionales, epiteliopatía corneal y dispersión de pigmentos. CONCLUSIONES: La técnica láser resultó ser eficaz para lograr control tensional y/o reducción de terapia médica antihipertensiva ocular en este tipo de pacientes.OBJECTIVES: To determine the efficiency and safety of selective laser trabeculoplasty in patients who suffered primary close angle glaucoma and were operated from cataract and/or glaucoma, and to identify the frequency of the main adverse effects. METHODS: Prospective descriptive and observational research study of 35 patients (50 eyes carrying primary close angle glaucoma, who were operated on from cataract and/or glaucoma at "Ramón Pando Ferrer" Cuban Institute of Ophthalmology from May to November 2007. The equipment called Tango LT 5106-T from Laserex was used. RESULTS: Female patients, people over 60 years-old, Caucausians, hypermetropics, high frequency of non

  13. Aplicación de modelos matemáticos al proceso de secado asistido por infrarrojos de descartes de limón (Citrus limon (L. Burm. F. Cv. Genova

    Directory of Open Access Journals (Sweden)

    Luis Puente-Díaz

    2013-01-01

    Full Text Available Los desechos agroindustriales son uno de los principales problemas ambientales a nivel mundial. Debido a las altas exigencias de calidad, la comercialización de limones de exportación genera grandes cantidades de desechos. Los descartes de limón contienen fibra, pectina, potasio, calcio y vitamina C. Por lo tanto, es importante desarrollar alternativas de procesamiento de estos sub-productos para agregarles valor y aumentar su vida útil. El objetivo de la presente investigación fue la aplicación del secado asistido por infrarrojos, como tecnología emergente, para estudiar el efecto de la temperatura de proceso sobre las cinéticas de secado de descartes de limón a 30, 40 y 50°C. Se utilizaron seis modelos matemáticos de capa fina encontrados en literatura para representar la cinética experimental. Basándose en análisis estadístico, el modelo Logarítmico presentó el mejor ajuste. Los valores de la difusividad efectiva del agua se estimaron en el rango de 9.45× 10-10 – 3.71× 10-9 m/s2. El valor de la energía de activación fue 55.90 kJ/mol.

  14. Correlation between macro texture measures carried out by the volumetric method and by different laser texture meter; Correlacion de medidas de macrotextura tomadas con el metodo volumetrico y con diferentes texturometros lasar

    Energy Technology Data Exchange (ETDEWEB)

    Parra Ruiz, L.; Yanguas Gonzalez, S. J.

    2013-06-01

    The reference value for the measurement of surface macro texture in the Spanish Main Road Network is the MTD or Mean Texture Depth (PMT, Profundidad Media de Textura), obtained by means of the volumetric methods, in accordance with the standard UNE EN 13036-1:12010. The fact that it is a spot measurement that requires road closures makes it an expensive procedure as well as slow and dangerous. In addition to this, the test results are relatively sensitive to the operator, being the procedure not too suitable for systematic surveys. These are some of the reasons that have contributed to the development of texture meter laser devices that can be assembled on board of vehicles, circulating without interfering with the normal traffic flow and providing a parameter named the MPD (Mean Depth Profile). According to the standard UNE-EN ISO 13473-1:2006, it is possible to estimate the texture obtained by volumetric methods, with the parameter ETD (Estimated Texture Depth) through the equation: ETD=0,8 x MPD+0.2 In 2008 CEDEX conducted a study that correlated macro texture measures obtained by means of the volumetric method with such carried out by different laser texture meters. The equations yield a better relation between MPD and MTD were dependent on the measurement device used and were not linear equations type, as is it indicated in the standard, but exponential type equations. (Author) 6 refs.

  15. Central uplift of custom immobilization radiotherapy patients with lower limb overhead sagittal laser affected without mobile; Elevacion central de inmovilizacion personalizada de pacientes radioterapicos con extremidades inferiores afectas sin laser sagital cenital movil

    Energy Technology Data Exchange (ETDEWEB)

    Velazquez Miranda, S.; Delgado Gil, M. M.; Ortiz Seidel, M.

    2011-07-01

    If you have a laser moving overhead sagittal or the location of tumors in the lower extremities is laborious, as to reference properly in the CT, is necessary before tattooing in the treatment table using their ability to relate the lateral midline with tattoos on the limb. For anatomical forms often happens that lasers are not displayed on the areas of our interest. The problem can be overcome if between the legs raise the bag or custom immobilizer above the height of the patient's abdomen, as this will have a central reference reliable and well designed lasers.

  16. Análisis de aceituna intacta mediante espectroscopia en el infrarrojo cercano (NIRS: una herramienta de utilidad en programas de mejora de olivo

    Directory of Open Access Journals (Sweden)

    Garrido, A.

    2003-03-01

    Full Text Available The objective of this study was to evaluate the potential use of Near-Infrared Spectroscopy (NIRS for the analysis of oil content, moisture and fatty acids composition in intact olive fruit. A total of 287 samples, each from a single plant from an olive breeding program, were scanned by NIRS between 400 and 1700 nm. Partial least squares (PLS regression was used to create calibration models (with 70 % of samples relating laboratory reference values to spectral data (original, first and second derivative spectral data. The best equations obtained were validated (with 30% of samples showing values of r2 of 0.88 % for the moisture, 0.83 % for oil content, 0.77 % for oleic acid content and 0.81 % for linoleic acid content. Therefore a reliable and accurate preselection can be made by using NIRS for both oil content and oleic acid content, with a nondestructive analysis, in a few seconds and without use neither production of chemical reagents.El objetivo de este trabajo es evaluar el potencial de la tecnología NIRS para el análisis del contenido de aceite, humedad y composición de ácidos grasos en aceituna intacta. A un total de 287 muestras de aceituna, cada una de una planta procedente de un programa de mejora de olivo, se les determinó sus datos espectroscópicos mediante reflectancia (400-1700 nm. A partir de los datos espectroscópicos originales, primera y segunda derivadas se obtuvieron diferentes ecuaciones de calibración (con el 70 % de las muestras mediante regresión por mínimos cuadrados parciales (PLS establecidas entre los datos espectroscópicos y los datos de laboratorio de referencia. Las mejores ecuaciones obtenidas fueron validadas (con el 30 % de las muestras mostrando valores de r2 de 0.88 % para la humedad, 0.83 % para contenido graso, 0.77 % para contenido de ácido oleico y 0.81% para contenido de ácido linoleico. Por tanto, la tecnología NIRS puede ser de utilidad para preseleccionar genotipos por su contenido de

  17. Modification of AISI M2 high speed tool steels after laser surface melting under different operation conditions; Modificacion de los aceros rapidos de herramientas AISI M2 por fusion superficial con laser bajo diferentes condiciones de operacion

    Energy Technology Data Exchange (ETDEWEB)

    Arias, J.; Cabeza, M.; Castro, G.; Feijoo, I.; Merino, P.; Pena, G.

    2010-07-01

    We applied a laser surface melting treatment to AISIM2 high-speed steel hardened and tempered- and studied the resulting surface characteristics (microstructure) and mechanical behavior (hardness and wear performance). The steel was treated using a Nd:YAG continuous-wave laser with different operation conditions. The influence of the laser processing parameters on the single tracks and on melted surface layer obtained by multipass system with 50% overlap were studied. The microstructure for all conditions is formed by MC- and M{sub 2}C-type carbides, martensite and retained austenite; the quantities of this phase depends on the operations conditions. It has been determined that low levels of power density and high speed scanning of the beam leads to greater homogeneity in the microstructure with high hardness values and wear resistance. (Author) 26 refs.

  18. Optical fibres sensor based in the intensity switch of a linear laser with two Bragg gratings; Sensor de fibra optica basado en el salto de intensidad de un laser lineal con dos rejillas de Bragg

    Energy Technology Data Exchange (ETDEWEB)

    Basurto P, M.A.; Kuzin, E.A.; Archundia B, C.; Marroquin, E.; May A, M.; Cerecedo N, H.H.; Sanchez M, J.J. [Departamento de Fotonica y Fisica Optica, Instituto Nacional de Astrofisica, Optica y Electronica (INAOE). Apartado Postal 51 y 216, 72000 Puebla (Mexico); Tentori S, D.; Marquez B, I.; Shliagin, M.; Miridonov, S. [Centro de Investigacion CESE (Mexico)

    2000-07-01

    In this work we propose a new configuration for an optical fiber temperature sensor, based on a linear type Er-doped fiber laser. The laser cavity consists of an Er-doped fiber and two identical Bragg gratings at the fiber ends (working as reflectors). Temperature changes are detected by measuring, through one of the gratings, the intensity variations atthe system's output. When the temperature of one of the Bragg gratings is modified, a wavelength shift of its spectral reflectivity is observed. Hence, the laser emission intensity of the system is modified. We present experimental results of the intensity switch observed when the temperature difference between the gratings detunes their spectral reflectance. Making use of this effect it is possible to develop limit comparators to bound the temperature range for the object under supervision. This limiting work can be performed with a high sensitivity using a very simple interrogation procedure. (Author)

  19. Evaluación de la retinopatía diabética proliferativa después del tratamiento con láser Evaluation of proliferative diabetic retinopathy after laser treatment

    Directory of Open Access Journals (Sweden)

    Juana Elvira Maciques Rodríguez

    2007-12-01

    Full Text Available La fotocoagulación láser (panfotocoagulación es indicación absoluta en la retinopatía diabética proliferativa (RDP sin y con características de alto riesgo de pérdida visual severa. Con el objetivo de evaluar este tratamiento en la RDP, se realizó este estudio desde enero de 2004 a diciembre de 2005 en el Centro de Atención al Diabético del Instituto de Endocrinología. Se estudiaron 120 pacientes con RDP, que se fotocoagularon. Las variables estudiadas fueron: edad, sexo, tiempo de evolución de la diabetes y presencia de hipertensión arterial y/o neuropatía. Se realizó examen oftalmológico y se comparó la agudeza visual y el estadio de la retinopatía antes y después del tratamiento. Para el análisis estadístico se utilizó la prueba de chi cuadrado. La forma avanzada de RDP se encontró en pacientes con más de 20 años de evolución de la enfermedad. Después del tratamiento en las mujeres predominó la RDP sin características de alto riesgo (CAR (38,1 % y en los hombres la RDP con CAR (38,9 %; 11 pacientes pasaron a la forma de retinopatía diabética (RD no proliferativa. La hipertensión arterial y la nefropatía diabética predominaron en la RDP con CAR y avanzada. Se concluye que la forma más grave de RD se asoció a mayor tiempo de evolución. La hipertensión arterial y la nefropatía son factores de riesgo asociados a las formas más severas de RD. La fotocoagulación no mejoró la visión de forma significativa, pero sí detiene la progresión de la retinopatía, e incluso, es capaz de modificar la severidad pasando a formas no proliferativas.Laser photocoagulation (panphotocoagulation is an absolute indication in the proliferative diabetic retinopathy (PDR without or with characteristics of high risk for severe visual loss. This study was undertaken at the Diabetic Care Center of the Institute of Endocrinology from January 2004 to December 2005 in order to evaluate this treatment in PDR. 120 patients with PDR

  20. Relativistic dynamics of an electron in a pulse of laser light with propagation along of an external magnetic field; Dinamica relativista de un electron en un pulso de luz laser con propagacion a lo largo de un campo magnetico externo

    Energy Technology Data Exchange (ETDEWEB)

    Gomez, F. [UAEM, Facultad de Ciencias, 50000 Toluca, Estado de Mexico (Mexico); Ondarza, R. [ININ, 52045 Ocoyoacac, Estado de Mexico (Mexico)

    2003-07-01

    The exact solution for the movement of a charged particle in the interaction of an electromagnetic pulse elliptically polarized spreading along a static and homogeneous magnetic field is obtained starting from the equation of force. The solution method allows to solve, in terms of the phase, the trajectory of an accelerated particle by a pulse of arbitrary width and modulated by an encircling in Gaussian form. The reported solutions in this work have diverse applications in the laser-plasma interaction physics. (Author)

  1. Análisis sobre la influencia de la densidad en la termografía de infrarrojos y el alcance de esta técnica en la detección de defectos internos en la madera

    Directory of Open Access Journals (Sweden)

    Rodríguez-Liñán, C.

    2012-03-01

    Full Text Available This paper shows the results of a laboratory phase for the determination of the 1limits of infrared thermography in detecting internal defects in wood and, furthermore, it analyses how the density of this material can influence the surface temperature displayed in a thermogram. To this end, experimental work is carried out whereby a series of work and environmental parameters are monitored (such as environmental temperature, relative humidity, distance to target, and the process is systematized by using pieces of different wood species (different densities and by devising a set of samples for which various possible cases are analysed in terms of size and internal position of the damage. Similarly, using these samples, a study has been conducted on the effect on the thermal image produced by an increase of humidity inside the defect phenomena normally associated with wood decay.

    En el presente artículo se muestran los resultados obtenidos en una fase de laboratorio al tratar de determinar el alcance de la termografía de infrarrojos en la detección de defectos internos en la madera y, por otro lado, cómo interviene la densidad de este material sobre la temperatura superficial mostrada en un termograma. Para ello se ha desarrollado un trabajo experimental donde se han controlado una serie de parámetros ambientales y de trabajo (temperatura ambiente, humedad relativa, distancia al objetivo…, y se ha sistematizado el proceso utilizando piezas de distintas especies de madera (distintas densidades y diseñando una serie de probetas donde se han analizado varias casuísticas posibles en cuanto a tamaño y posición interna de los daños. Análogamente, sobre estas probetas se ha estudiado el efecto que produce sobre la imagen termográfica un incremento de humedad interna en el defecto asociada normalmente a los fenómenos de pudrición de la madera.

  2. Estudio de cromóforos orgánicos con propiedades ópticas no lineales

    Directory of Open Access Journals (Sweden)

    Acebal, P.

    2004-04-01

    Full Text Available Second-order nonlinear optical properties of three dyes (methylene blue, thionine and coumarin 7 were evaluated using ab initio quantum mechanical methods and compared with those of a standard push-pull chromophores (disperse red 1, DMNPAA and PNA. The two level model was used to obtain the frequency dependency of the microscopic electrooptic effect, and the results show that the obtained values for the dyes are higher than the standard chromophores at wavelengths of the near infrared. Therefore, these dyes may be applied in photonic devices and photorefractive materials.

    Mediante métodos de cálculo ab initio se han estudiado las propiedades ópticas no lineales de segundo orden de tres colorantes (azul de metileno, tionina y coumarina 7, y se han comparado con los obtenidos para tres cromóforos donador-aceptor (disperse red 1, DMNPAA y PNA. Posteriormente se ha utilizado el modelo de los dos niveles para estimar la dependencia con la frecuencia del efecto electroóptico microscópico. Los resultados muestran que los colorantes estudiados tienen valores de esta propiedad del mismo orden o superiores que los cromóforos clásicos en longitudes de onda del infrarrojo cercano, por lo tanto puede estudiarse su aplicación en dispositivos fotónicos y materiales fotorrefractivos.

  3. Prediction of the Composition of Fresh Pastures by Near Infrared Reflectance or Interactance-Reflectance Spectroscopy Predicción de la composición de pradera fresca mediante espectroscopía de reflectancia o interactancia-reflectancia en el infrarrojo cercano

    Directory of Open Access Journals (Sweden)

    Daniel Alomar

    2009-06-01

    Full Text Available Fast and precise analytical tools can contribute to optimize pasture management decisions. This work was carried out to evaluate the potential of one such technique, near infrared spectroscopy (NIRS, to predict the nutritional value of pastures without previous drying of the samples, comparing two forms of collecting the spectra: reflectance, or interactance-reflectance (fiber optic probe. Samples (n = 107 from different swards were taken across the humid and temperate regions (Los Ríos and Los Lagos of southern Chile. Once their spectra were collected, dry matter (DM and several chemical constituents, such as crude protein (CP, metabolizable energy (ME, neutral (NDF and acid detergent fiber (ADF, soluble carbohydrates (SC, soluble crude protein (SCP and neutral detergent insoluble N (NDFIN, were determined as reference data. Calibrations were developed and the best ranked were selected (by cross-validation according to a lower standard error of cross validation (SE CV and a higher determination coefficient of cross validation (R²CV. Calibrations in the reflectance mode, for DM and CP, reached a high R²CV (0.99 and 0.91, respectively and a SE CV (6.5 and 18.4 g kg-1. Equations for ADF, SCP and ME were ranked next, with R²CV of 0.87, 0.84 and 0.82, respectively, and SE CV of 15.88 g kg-1, 15.45 g kg-1 and 0.34 Mj kg-1. Equations for NDF, SC and NDFIN, with R²CV of 0.78, 0.77 and 0.61, respectively, and SE CV of 35.57, 94.54 and 1.89 g kg-1, respectively, are considered unreliable for prediction purposes. Interactance-reflectance, on the other hand, resulted in poorer equations for all fractions.Disponer de técnicas bromatológicas rápidas y precisas ayudaría a optimizar decisiones en el manejo de praderas. En este trabajo se evaluó el potencial de una de tales técnicas, la espectroscopía de reflectancia en el infrarrojo cercano (NIRS para predecir el valor nutricional de praderas al estado fresco y comparar dos formas de colectar los

  4. Tomato Infrared Drying: Modeling and some Coefficients of the Dehydration Process Secado de Tomate por Infrarrojo: Modelación y algunos Coeficientes del Proceso de Deshidratación

    Directory of Open Access Journals (Sweden)

    Paulo Cesar Corrêa

    2012-06-01

    Full Text Available Infrared dehydration is more advantageous than the convective system under similar conditions, and studying this process is important to further develop equipment and procedures. Thus, the aim of this work was to study the dehydration process of tomato (Solanum lycopersicum L. slices obtained by infrared drying at three different maturity stages throughout two different procedures: Firstly, the drying model was determined by applying the mass and energy balances under wet bulb temperature for the constant drying rate period and secondly, the mass effective diffusion coefficient was determined throughout the experimental data and the theory of diffusion of the liquid phase for the decreasing drying rate period. Tomato fruits cv. Santa Cruz were used. Three maturity stages were selected: green (stage 1, orange (stage 2, and red (stage 3. Mathematical models frequently used to represent drying of agricultural products were fitted to the experimental data of tomato drying. The effective diffusion coefficient was obtained by adjusting the liquid diffusion mathematical model to the experimental data of the descending period of dehydration. The two-term model was the best one to represent the tomato dehydration process. The critical moisture content for tomato dehydration was 2.97 kgw kgdm-1. There is an initial dehydration period in which the drying rate reaches its maximum (approximately 1.05 kgw kgdm-1, about 3 min. Three different methods were used to obtain values of the effective diffusion coefficient, including the finite element method, which had the lowest values for the least square sum of deviation 1.00 x 10-7 m² s-1. The global coefficient of heat transfer was 12.45 W m-2K-1, and the global coefficient of mass transfer was 0.0105 m s-1.La deshidratación por infrarrojo es más ventajosa que el sistema convectivo, en condiciones similares, y el estudio de este proceso es importante para el desarrollo de equipos y procedimientos. Por tanto

  5. CARACTERIZACIÓN FENOLÓGICA DE BOSQUES TROPICALES CADUCIFOLIOS USANDO INFORMACIÓN ESPECTRAL: EXPERIMENTOS CON COMPONENTES

    Directory of Open Access Journals (Sweden)

    Marcos Casiano

    2014-10-01

    Full Text Available La caracterización de la fenología de la vegetación, particularmente la asociada a los bosques tropicales caducifolios, permite predecir los impactos del cambio climático y de los intercambios de carbono y agua entre la atmósfera y la vegetación, por lo que es importante modelarla. Existen diferentes métodos experimentales para caracterizar la fenología de la vegetación, sin embargo, el uso de sensores remotos permite caracterizaciones fenológicas de bajo costo y eficientes. No obstante lo anterior, la mayoría de las aplicaciones de sensores remotos cuando se usan índices de vegetación (IV solo modelan el crecimiento del follaje (etapa vegetativa y senescente y no la etapa reproductiva. Dado que la floración es crítica para la viabilidad de la vegetación, además de su valor en la apicultura, es necesario evaluarla con sensores remotos aerotransportados en el segmento visible a infrarrojo del espectro electromagnético. La revisión de experimentos y observaciones de floración muestran que los patrones temporales en las bandas del rojo (R e infrarrojo cercano (IRC son contrarios, lo cual no ocurre en los IV que caracterizan el follaje. A partir de estos análisis, se diseñó un experimento de componentes de la vegetación para simular las etapas fenológicas de pre floración, floración y post floración que hipotéticamente ocurren en un bosque caducifolio. Los resultados mostraron que es posible el desarrollo de un modelo fenológico aproximado si se usa el índice IVIS para caracterizar la inducción floral, el inicio y el pico de la floración, aunque el término de ésta se confunde con el inicio del crecimiento vegetativo del follaje.

  6. Diatomic gasdynamic lasers.

    Science.gov (United States)

    Mckenzie, R. L.

    1972-01-01

    Predictions from a numerical model of the vibrational relaxation of anharmonic diatomic oscillators in supersonic expansions are used to show the extent to which the small anharmonicity of gases like CO can cause significant overpopulations of upper vibrational states. When mixtures of CO and N2 are considered, radiative gain on many of the vibration-rotation transitions of CO is predicted. Experiments are described that qualitatively verify the predictions by demonstrating laser oscillation in CO-N2 expansions. The resulting CO-N2 gasdynamic laser displays performance characteristics that equal or exceed those of similar CO2 lasers.

  7. Diatomic gasdynamic lasers

    International Nuclear Information System (INIS)

    McKenzie, R.L.

    1971-12-01

    Predictions from a numerical model of the vibrational relaxation of anharmonic diatomic oscillators in supersonic expansions are used to show the extent to which the small anharmonicity of gases like CO can cause significant over-populations of upper vibrational states. When mixtures of CO and N 2 are considered, radiative gain on many of the vibration-rotation transitions of CO is predicted. Experiments are described that qualitatively verify the predictions by demonstrating laser oscillation in CO-N 2 expansions. The resulting CO-N 2 gasdynamic laser displays performance characteristics that equal or exceed those of similar CO 2 lasers

  8. Relativistic motion of charged particles in the interaction of short pulses of intense laser light with plasma; Movimiento relativista de particulas cargadas en la interaccion de pulsos cortos de luz laser intensa con plasma

    Energy Technology Data Exchange (ETDEWEB)

    Gomez R, F

    2004-07-01

    interval d{tau} of the electron that per se is an invariant, it is proportional to a certain interval d{eta}. In the chapter 3 it will see that the movement analysis of the charged particles in the electromagnetic field presents serious mathematical difficulties, where the integration of the movement equations results extraordinarily complex and it can only be integrated in most of the cases by numerical means. We will present the procedure used for the deduction of the equations of motion of a charged particle in the interaction of a laser light pulse and a homogeneous magnetic field in arbitrary direction, with the addition of an harmonic term of force. In this chapter it is not sought to make a meticulous discussion of the involved physics and only we will present the algebraic procedure. In the chapter 4 we will present the integration method of the Lorentz force, and we will obtain the exact solution for the case of a pulse of a plane wave elliptically polarized of arbitrary amplitude spreading along an external magnetic field. The solution method will allow to decrease the solutions to the case in which we have an infinite waves train reported by Ondarza (10) and so the corresponding solutions will be obtained reported in the literature by other authors. The main contribution in this part will be the one of obtaining an exact solution for the problem of the interaction of an electromagnetic pulse, modulated by a form of gaussian type, and a charged particle. The above-mentioned approaches in acceptable measure to real situations in well-known experiments. It will be found that when the form of the pulse is introduced to modulate the electromagnetic field, an amplification of the resonance zone in the solutions appears. Such resonance depends of the external magnetic field that fixes by turns the cyclotron frequency, and of the number of optical cycles that compose the encircling one that modulates the pulse form. In the chapter 5 it will see the case of small

  9. SÍNTESIS, CARACTERIZACIÓN E INCORPORACIÓN DE NANOPARTÍCULAS (ESFERAS Y BARRAS) DE AU EN LA MEZCLA (DONADOR/ACEPTOR) P3HT/PCBM CON POSIBILIDAD DE USO EN CELDAS FOTOVOLTAICAS ORGÁNICAS HÍBRIDAS

    OpenAIRE

    ADAME SOLORIO, JESÚS SALVADOR

    2017-01-01

    En este trabajo se reporta la síntesis y caracterización de nanopartículas de oro (NPs de Au), con morfología irregular, en medio acuoso mediante un método secuencial de crecimiento. Variando solo la cantidad de suspensión semilla de Au fue posible variar el tamaño y forma de las NPs de Au en función del volumen de la suspensión semilla de Au. Por otro lado, los polígonos irregulares presentan resonancia plasmónica de superficie (RPS) en la región del infrarrojo cercano, que favorece la separ...

  10. La iridotomía periférica con Nd YAG láser en el síndrome de dispersión pigmentaria/glaucoma pigmentario Nd YAG laser peripheral iridotomy in the pigment dispersion syndrome/pigmentary glaucoma

    Directory of Open Access Journals (Sweden)

    Francisco García González

    2002-06-01

    Full Text Available En 13 ojos con diagnóstico de síndrome de dispersión pigmentaria y 5 con glaucoma pigmentario, inicialmente se evaluaron la presión intraocular, los signos de dispersión pigmentaria, la relación excavación-papila y las alteraciones del campo visual; se realizó iridotomía periférica Nd YAG láser en los ojos con este síndrome y trabeculectomía a los que presentaban glaucoma pigmentario. Se chequearon cada 4 meses hasta 24 meses. Once ojos con iris cóncavo mostraron aplanamiento del iris y 2 con iris convexos no variaron con la iridotomía láser; en los 18 ojos disminuyeron evidentemente los signos de dispersión pigmentaria y la presión intraocular permaneció estable, la cual mejoró en los tratados con la trabeculectomía. En el síndrome de dispersión pigmentaria es muy frecuente la configuración cóncava del iris; la iridotomía lo aplana y evita el roce iridozonular, disminuyendo la dispersión y deposición de pigmento que prevendría el aumento de la presión intraocular y el glaucoma pigmentario.The intraocular pressure, the signs of pigment dispersion, the excavation-papilla relation and the alterations of the visual field were initially evaluated in 13 eyes with diagnosis of pigment dispersion syndrome and 5 with pigmentary glaucoma. Nd YAG laser perypheral iridotomy was performed in patients with this syndrome, whereas those who presented pigmentary glaucoma underwent trabeculectomy. They were checked every 4 months up to 24 months. 11 eyes with concave iris showed flattening of the iris and 2 with convex iris did not vary with laser iridotomy. An evident reduction of the signs of pigment dispersion was observed in the 18 eyes. The intraocular pressure remained stable and it improved in those treated with trabeculectomy. In the pigment dispersion syndrome it is very frequent the concave configuration of the iris; the iridotomy flattens it and avoids the iridozonular friction, reducing the dispersion and deposition of

  11. Láser helio-neón combinado con clorhexidina al 0,2 %.: Efectos clínicos y microbiológicos en el tratamiento de la gingivitis crónica Helium-neon laser combined with 0.2% chlorhexidine: Clinical and microbiological effects in the treatment of chronic gingivitis.

    Directory of Open Access Journals (Sweden)

    Tatiana Peña Ruiz

    2007-09-01

    Full Text Available La gingivitis crónica constituye una de las formas más frecuentes de enfermedad periodontal, caracterizada por la inflamación crónica de la encías, tumefacción, enrojecimiento y sangramiento. Su principal factor de riesgo lo constituye la microbiota del surco gingival, que resulta necesario, pero no suficiente para desencadenarla. Se realizó un ensayo clínico-terapéutico fase II, controlado, aleatorizado y a simple ciegas, para evaluar los efectos clínicos y microbiológicos del tratamiento combinado de la radiación láser helio-neón (He-Ne con la clorhexidina al 0,2 %. Todos los pacientes recibieron tratamiento inicial; al mes de finalizado este, se distribuyeron aleatoriamente en 2 grupos: un grupo estudio que recibió la combinación láser-neón y clorhexidina al 0,2 % y otro grupo control que solo recibió clorhexidina al 0,2 %. Se realizó una evaluación a los 15, 30 y 45 días, con criterios de eficacia clínicos y microbiológicos. Los resultados clínicos fueron satisfactorios en el grupo estudio con predominio de los morfotipos I, caracterizados por cocos gramnegativos y positivos, compatibles con un periodonto sano. Los eventos adversos detectados con esta terapéutica fueron mínimos, todos relacionados con la somnolencia.Chronic gingivitis is one of the most common periodontal diseases that is characterized by chronic inflammation, tumefaction, redness and bleeding. The main risk factor is gingival sulcus microbiota that is essential but not enough to unleash it. A phase II controlled randomized blind clinical/therapeutical assay was conducted to evaluate the clinical and microbiological effects of the combined treatment based on helium-neon laser (He-Ne with 0.2% chlorhexidine. All the patients were initially treated; after a month, they were randomly distributed into two groups, that is, the study group received a helium-neon laser plus 0.2% chlorhexidine combination and the control group was treated with 0

  12. ARCILLA BENTONÍTICA MODIFICADA CON QUITOSANO PARA MATERIALES COMPUESTOS BIODEGRADABLES

    Directory of Open Access Journals (Sweden)

    GUSTAVO NEIRA ARENAS

    2011-01-01

    Full Text Available Se estudió la modificación de una arcilla colombiana tipo montmorillonita con un biopolímero policatiónico -quitosano-, y se evaluó el efecto del peso molecular del modificante en la efectividad del tratamiento de modificación. Como material de partida se empleó una arcilla montmorillonítica sódica la cual se sometió a un procedimiento de modificación desarrollado para tal fin, empleando diferentes concentraciones de quitosano de bajo y alto peso molecular. Las muestras de arcilla modificada fueron analizadas mediante Difracción de Rayos X, Espectroscopía de Infrarrojo con Transformada de Fourier (FTIR, y Análisis Termogravimétrico (TGA con el fin de identificar los posibles efectos del tratamiento de modificación sobre la estructura de la arcilla. Los resultados mostraron una relación directa entre el incremento de la distancia interlaminar de la arcilla modifi cada y la concentración de quitosano, encontrándose un incremento máximo de 1,559 nm para la relación 2:1 en peso de quitosano de bajo peso molecular y arcilla. En general, se detectó una mayor separación interlaminar en la arcilla al emplear quitosano de bajo peso molecular como modificador, comparado con el quitosano de alto peso molecular, aunque en los dos casos se observó una integración efectiva del agente modificador a la estructura de la arcilla. El análisis IR de la arcilla modificada evidenció la presencia en la estructura de grupos CH, NH3+, CH y NH , provenientes del quitosano, mientras el análisis TG sugirió un cierto grado de hidrofobicidad asociada a la presencia de quitosano, siendo estos aspectos de gran importancia para la aplicación de estos materiales como refuerzos de películas poliméricas biodegradables.

  13. Paciente con esquizofrenia tratado con ziprasidona + clozapina

    Directory of Open Access Journals (Sweden)

    Pol Yanguas E.

    2013-05-01

    Full Text Available P es un paciente diagnosticado de esquizofrenia, sigue en un piso tutelado un programa de rehabilitación, está medicado con clozapina 500 mg/día y ziprasidona 280 mg/ día. Padece hipercolesterolemia, tabaquismo y sus hábitos alimenticios no son buenos. La medicación que utiliza desde 2007 hasta ahora se refleja en la tabla 1. El último tratamiento se le introdujo el 7 de agosto de 2012, habiendo presentado un electro cardiograma (ECG normal, pero con ligera taquicardia ventricular y prolactinemia de 44,8 ng/ml (valores normales: 2-18 ng/ml.

  14. Lasers '89

    International Nuclear Information System (INIS)

    Harris, D.G.; Shay, T.M.

    1990-01-01

    This book covers the following topics: XUV, X-Ray and Gamma-Ray Lasers, excimer lasers, chemical lasers, nuclear pumped lasers, high power gas lasers, solid state lasers, laser spectroscopy. The paper presented include: Development of KrF lasers for fusion and Nuclear driven solid-state lasers

  15. PRODUCCIÓN DE POLIHIDROXIALCANOATOS (PHAs A PARTIR DE Ralstonia eutropha EN UN MEDIO CON HARINA DE YUCA COMO FUENTE DE CARBONO

    Directory of Open Access Journals (Sweden)

    ELIZABETH ROJAS FERNÁNDEZ

    Full Text Available Los polihidroxialcanoatos (PHAs son poliésteres intracelulares sintetizados por diferentes especies bacterianas, las cuales los acumulan como gránulos cuando se encuentran en condiciones limitantes de nutrientes esenciales para su crecimiento como el oxígeno, nitrógeno y carbono, son biodegradables y, dependiendo de su composición química y estructural, pueden ser empleados en aplicaciones semejantes a los polímeros [1].En la actualidad, este tipo de biopolímeros presentan un mayor costo comparado con los derivados del petróleo, pero el uso de fuentes renovables y el aprovechamiento de subproductos agroindustriales para la generación de nuevos productos es una alternativa ecológica de importancia mundial. En la presente investigación se estudió la producción de polihidroxialcanoatos (PHA mediante fermentación bacteriana de glucosa, obtenida a partir de harina de yuca HMC1 empleando Ralstonia eutropha en un medio con cinco relaciones carbono/nitrógeno(12:1, 16:1, 20:1, 24:1, 28:1. Se obtuvo como resultado, que la relación carbono/nitrógeno de 20 es la que más favorece la acumulación intracelular de biopolímero, con la cual se alcanza una producción de 0,62 g/L de PHA. El PHA sintetizado se caracterizó por medio de calorimetría diferencial de barrido (DSC, Análisis Termogravimetrico (TGA, Espectroscopía de Infrarrojo con Transformada de Fourier (IR-FT y Microscopía electrónica de Barrido (SEM, concluyendo que el biopolímero obtenido fue polihidroxibutirato (PHB.

  16. Funcionalización de polietileno de baja densidad con anhídrido maleico en estado fundido

    Directory of Open Access Journals (Sweden)

    Manuel Guzmán

    2014-01-01

    Full Text Available En este estudio, polietileno de baja densidad (PEBD fue modificado con anhídrido maleico (AM en estado fundido usando concentraciones diferentes de peróxido de dicumilo (DCP (0.25, 0.50, 0.75 y 1.0 %. Los materiales obtenidos fueron caracterizados por contenido de gel, titulaciones ácido-base, análisis infrarrojo (IR, calorimetría de barrido diferencial (DSC, análisis termogravimétrico (TGA, análisis reológico, propiedades mecánicas, dureza y permeabilidad al oxígeno. El análisis reométrico indicó que el tiempo óptimo para obtener las mezclas es alrededor de 7.5 minutos. El análisis IR mostró que el AM fue injertado en el esqueleto del PEBD, el grado de injerto incrementó con el contenido de DCP y el más alto grado de injerto (1.12 ± 0.015 %, fue exhibido por la muestra obtenida empleando la mayor cantidad de DCP (1 %. La estabilidad térmica de las muestras funcionalizadas fue ligeramente mayor que la del PEBD. La cristalinidad de las muestras funcionalizadas fue diferente a la exhibida por el PEBD. El comportamiento reológico presentado por las muestras fue seudoplástico. Las propiedades mecánicas, dureza y la permeabilidad al oxigeno fueron dependientes de la cantidad de DCP y AM injertado en el PEBD.

  17. LASIK - Laser Eye Surgery

    Science.gov (United States)

    ... Refractive Surgery Procedures What Is Photorefractive Keratectomy (PRK)? LASIK — Laser Eye Surgery Leer en Español: LASIK—Cirugía ocular con láser ... loss of close-up focusing power. How the LASIK procedure works LASIK is performed while the patient ...

  18. Videojuego con Realidad Virtual

    OpenAIRE

    González Mora, César

    2017-01-01

    El objetivo del proyecto es el desarrollo de un videojuego deportivo que utilice realidad mixta. El videojuego se podrá utilizar con dispositivos de tipo cardboard, y utilizará realidad aumentada para la interacción del jugador con el videojuego. En el desarrollo se utilizará el motor Unity para conseguir una aplicación multiplataforma, y la librería Vuforia para implementar realidad mixta.

  19. Sistemas integrados con Arduino

    OpenAIRE

    EL YAKOUTI, MOHAMMED

    2017-01-01

    Design of a robot prototype remotely controllable from Bluetooth using Arduino. Control and testing of sensors and events interacting with Arduino and Bluetooth. Diseño de un prototipo de robot controlable remotamente con Bluetooth utilizando Arduino. Control y verificación de los sensores y eventos que interactúan mediante el Arduino y el Bluetooth. El Yakouti, M. (2017). Sistemas integrados con Arduino. http://hdl.handle.net/10251/89274. TFGM

  20. Investigando con personas con dificultades de aprendizaje

    Directory of Open Access Journals (Sweden)

    Borja González Luna

    2013-12-01

    Full Text Available El artículo muestra los orígenes de lo que Walmsley (2008 denomina «investigación inclusiva». Para comprender qué se entiende por investigación inclusiva tenemos que remontarnos a los debates epistemológicos sobre las metodologías cuantitativas y cualitativas, acontecidos en la década de los 90, en torno a la revista Disability & Society. A partir de una síntesis de dichos debates, focalizados en el ámbito de la «discapacidad intelectual y del desarrollo», se exponen dos estrategias de colaboración con dicha población: a una aproximación etnográfica (de trabajo grupal, y b una aproximación biográfica (de trabajo individual. A continuación se esboza un posible diseño de trabajo de campo que intenta superar el paradigma cualitativo «clásico» con el objetivo de incluir a dicho colectivo más allá del rol de «sujetos de la investigación». Para finalizar se recoge el debate sobre la accesibilidad de los resultados de la investigación a los participantes en dichas investigaciones, y con ello la necesaria innovación en el ámbito de las «devoluciones» de los resultados, cuando se trata de incluir a personas que presentan limitaciones para la comprensión del lenguaje abstracto oral y/o escrito.

  1. Empleo de técnicas de teledetección de muy alta resolución espacial para el análisis del comportamiento de las variables fenológicas en cultivos (prunus pérsica con riego deficitario controlado

    Directory of Open Access Journals (Sweden)

    P. Pérez-Cutillas

    2014-01-01

    Full Text Available El trabajo se realizó en una parcela de melocotoneros donde se aplicaron tratamientos de riego diferentes, lo que generó distinto grado de déficit hídrico en los árboles estudiados. Esta variabilidad en la situación hídrica de los árboles fue medida en superficie por medio del potencial hídrico de tallo a mediodía (Ψs, y desde el aire por medio de la captación de una imagen obtenida con una cámara multiesprectal que permitieron estimar los valores del espectro infrarrojo cercano (NIR y del índice de vegetación de diferencia normalizada (NDVI con una resolución espacial de 25 cm. Los índices obtenidos fueron sensibles al grado de comportamiento de las variables fenológicas de los cultivos tomadas en campo, que presentaron significativos valores de correlación con los valores obtenidos mediante técnicas de teledetección.

  2. Liposucción con diodo láser 980-nm (LSDL 980-nm: optimización de protocolo seguro en cirugía de contorno corporal Body contouring using laser diode 980-nm (LSDL 980-nm assisted lipolysis: a safe procedure

    Directory of Open Access Journals (Sweden)

    P. Centurión

    2011-12-01

    Full Text Available La disponibilidad en el mercado de una gran gama de equipos de láser de diferentes potencias y longitudes de onda para su aplicación en el tejido graso, así como la existencia de diversos trabajos científicos sobre el tema con resultados opuestos, han causado gran confusión y dudas sobre la técnica de láser-lipolisis entre los cirujanos plásticos. Presentamos un protocolo quirúrgico de liposucción con diodo-láser de 980-nm (LSDL 980-nm aplicado en 240 pacientes. Evaluamos la seguridad de la técnica según el índice de complicaciones sufrido, así como la evolución en el post-operatorio de los pacientes tratados. Empleamos un equipo diodo-láser-980 nm (ORlight ®, cuya energía llevamos a través de una fibra de 600 μm. Esto se traduce en la aplicación de 99 J por cada cm² de área tratada, con un espesor de hasta 4 cm de tejido adiposo subcutáneo. No tuvimos complicaciones mayores, tipo quemaduras y entre las complicaciones menores, que fueron de un 48.33 % (116 pacientes, encontramos equímosis mínimas (menos del 2 % de superficie corporal. El tiempo que los pacientes requirieron para controlar el dolor postoperatorio fue de entre 1 y 2 días. Consideramos importante la incorporación de la LSDL-980 nm por ser una técnica menos traumática y con bajo índice de complicaciones, que reduce el periodo de recuperación de los pacientes, provoca una importante retracción de la piel y disminuye el dolor postoperatorio.The availability of multiple laser systems on the market with different power and wavelengths and the existence of several scientific papers with contradictory presents, have created great confusion and doubts among plastic surgeons with regard to the laser lipolysis technique. We report a surgical protocol for liposuction diode laser-980 nm (LSDL-980 nm applied to 240 patients. We evaluate the security of the technique according to the complication rate and the postoperative development of patients submitted to

  3. Laser Technology.

    Science.gov (United States)

    Gauger, Robert

    1993-01-01

    Describes lasers and indicates that learning about laser technology and creating laser technology activities are among the teacher enhancement processes needed to strengthen technology education. (JOW)

  4. Modelación del perfil de soldadura y de la cavidad de vapor en la aleación de aluminio 5182 soldada con láser. // Welding profile and steam cavity modelation in aluminum 5182 alloy welded with laser.

    Directory of Open Access Journals (Sweden)

    M. Pastor

    2002-09-01

    Full Text Available El presente trabajo incursiona en el desarrollo de modelos para predecir la forma de la cavidad de vapor y el perfil de laaleación de aluminio 5182 con soldadura láser, para lo cual ha sido empleado el paquete profesional de elementos finitosCOSMOS/M. La modelación de la soldadura ha sido realizada considerando como variable el grado de desenfoque del hazde láser, considerando el flujo de calor según un modelo Gaussiano, con un coeficiente de absorción de 0.24 para lacondición de haz enfocado y 0.16 para las condiciones de desenfoque negativo y positivo. La validez de los resultadosobtenidos se comprobó mediante los resultados obtenidos en pruebas experimentales.Palabras claves: Aleaciones de aluminio, láser de Nd:YAG._______________________________________________________________________AbstractThe purpose of this research is the study of laser welding process for the 5182 aluminum alloys and the development ofmodels by means of the COSMOS/M package, in order to predict the shape of the steam cavity and the weldingtemperatures profile. Modeling has been done considering the degree of defocusing. The heat flow applied on the modelswas a Gauss flow, with a coefficient of absorption of 0.24 for the condition of the focused face and 0.16 for the conditionsof negative and positive defocusing. The validity of the models has been demonstrated comparing their results with thoseobtained by experimental tests.Key words: Aluminum alloys, Nd: YAG laser.

  5. Giochiamo con i robot

    Directory of Open Access Journals (Sweden)

    Andrea Bonarini

    2009-01-01

    Full Text Available "Giochiamo con i robot" e' un laboratorio interattivo per grandi e piccini realizzato per l'edizione 2007 del Festival della Scienza di Genova. Lungo un percorso che va dalla telerobotica alla robotica evolutiva, il laboratorio sviluppa il tema di dare intelligenza ai robot. Questo percorso, le cui tappe sono le varie installazioni, si conclude nella "bottega" dove e' possibile costruire e programmare i propri robot o smontare e modificare quelli esposti durante il percorso didattico. I visitatori sono coinvolti in attivita' ludiche grazie alle quali possonoentrare in contatto con alcune delle idee potenti della robotica,

  6. disegnare con ... Alberto Pratelli

    Directory of Open Access Journals (Sweden)

    Roberto Mingucci

    2017-12-01

    Full Text Available Con questa breve intervista ad Alberto Pratelli, (non a caso scelto per aprire questa nuova rubrica intendia-mo inaugurare un dialogo con personalità significati-ve del Disegno di Architettura, che consenta riflessioni dedicate alle sue varie dimensioni, oggi più che mai da approfondire. La suggestione a farlo, viene da un’idea di Pablo Rodri-guez Navarro ed abbiamo quindi pensato di avviarla proprio in questo numero, che Pablo ha accettato di curare su un tema a lui particolarmente caro.

  7. Hydrogen from bioethanol on Pt/Hydrotalcite catalysts stabilized with WOx; Hidrogeno a partir de bioetanol sobre catalizadores de Pt/hidrotalcita estabilizados con WOx

    Energy Technology Data Exchange (ETDEWEB)

    Ortiz, M.A.; Contreras, J.L. [Universidad Autonoma Metropolitana-Azcapotzalco, Mexico, D.F. (Mexico)]. E-mail: jlcl@correo.azc.uam.mx; Fuentes, G.A. [Universidad Autonoma Metropolitana-Iztapalapa, Mexico, D.F. (Mexico); Luna, R. [Universidad Autonoma Metropolitana-Azcapotzalco, Mexico, D.F. (Mexico); Salmones, J.; Zeifert, B. [ESIQIE, Instituto Politecnico Nacional, Mexico, D.F. (Mexico)] Vazquez, A. [Instituto Mexicano del Petroleo, Mexico, D.F. (Mexico)

    2009-09-15

    To produce H{sub 2} from bio-ethanol, the synthesis, characterization and reaction of Pt catalysts exchanged with hydrotalcite were studied. The catalysts obtained were characterized with BET area, x-ray diffraction and Raman, Infrared and UV-vis spectroscopies. The catalytic evaluation was performed with micro-reaction equipment using a water/ethanol ratio of 4 at 45 degrees Celsius. The effect of the W contents was from 0.5 to 3%. X-ray diffraction of the Co and Ni series showed a continuous decrease in crystallinity as W contents increased. Findings from N{sub 2} adsorption show pores in the form of parallel plates and a mesoporous distribution (bimodal) with areas between 151-257 m{sup 2}/g. OH, H{sub 2}O, Al-OH, Mg-OH, W-O and CO32- vibrations and W-O-W surface bonds were observed using infrared and Raman spectroscopy. Tungsten oxide groups were found with UV-vis spectroscopy. The catalyst with the greatest selectivity and stability is between 0.5 and 1% of W, and the highest stability is after 7 h of reaction. In this Pt series, the reaction that most consumed ethanol was that which produces CH{sub 4} and CO{sub 2}. The total conversion increased in function of W contents, between 0.5 and 3%. W stabilized the Pt/hydrotalcite catalyst with 0.5%W being the optimal concentration. The least amount of C{sub 2}H{sub 4} production and no CO was found for this Pt catalyst. [Spanish] Para la produccion de H{sub 2} se estudio la sintesis, caracterizacion y reaccion de catalizadores de Pt intercambiados con hidrotalcita, a partir de bioetanol. Los catalizadores obtenidos se caracterizaron por: area BET, difraccion de rayos X, espectroscopias: Raman, Infrarrojo y UV-vis. La evaluacion catalitica se llevo a cabo en un reactor de lecho fijo usando una relacion agua/etanol de 4 a 450 grados centigrados, se estudio el efecto del contenido de W desde 0.5 hasta 3% en peso. Conforme aumento el contenido de W se encontro por difraccion de rayos X un aumento de la cristalinidad

  8. Conversando con Oriol Bohigas

    OpenAIRE

    Redondo Domínguez, Ernesto; Moya Sala, Joaquim

    2015-01-01

    [EN] Interview with Oriol Bohigas [ES] Entrevista con Oriol Bohigas Redondo Domínguez, E.; Moya Sala, J. (2015). Conversando con… Oriol Bohigas. EGA. Revista de Expresión Gráfica Arquitectónica. 20(26):22-35. doi:10.4995/ega.2015.4061 22 35 20 26

  9. DR Con o:

    African Journals Online (AJOL)

    which could fall under the Ugandan influence. The con-. flict in the ..... The Congolese people and international community within SADC, the AU ..... ments and make peace among themselves. However, one ... friends overnight.There is a great ...

  10. fertilizada con diferentes abonos

    Directory of Open Access Journals (Sweden)

    Jorge Alberto Elizondo-Salazar

    2007-01-01

    Full Text Available Producción y calidad de la biomasa de morera (Morus alba fertilizada con diferentes abonos. Se llevó a cabo un experimento en la Estación Experimental “Alfredo Volio Mata” de la Universidad de Costa Rica con el fi n de evaluar la aplicación de 150 kg de N/ha/año proveniente de dos abonos orgánicos: lombriabono y compostaje; y de un fertilizante químico, sobre la producción y calidad de la biomasa de morera. El periodo experimental comprendió un ciclo de 12 meses, iniciando en julio del 2003 y fi nalizando en julio del 2004. Se utilizó una plantación de morera de 12 años de establecida con una densidad de siembra de 27.777 plantas/ ha. Se empleó un diseño de bloques completos al azar con cuatro tratamientos: dos abonos orgánicos, nitrato de amonio (33,5% N y un control. Las plantas se podaron a 0,6 m sobre el nivel del suelo al inicio del ensayo. Durante el periodo experimental, las plantas fueron podadas consecutivamente cada 90 días. Las hojas y los tallos fueron separados y analizados para determinar el contenido de materia seca y proteína cruda. La producción de materia seca fue 23% superior y el contenido de proteína cruda fue signifi cativamente mayor con el nitrógeno químico, mientras que el contenido de materia seca fue menor. No se encontraron diferencias signifi cativas entre el tratamiento control y los tratamientos orgánicos.

  11. pacientes con falla cardiaca

    Directory of Open Access Journals (Sweden)

    Diana Marcela Achury Saldaña

    2007-01-01

    Full Text Available Objetivo: determinar la adherencia al tratamiento de pacientes con falla cardiaca hospitalizados, al aplicar un plan educativo quefomenta el autocuidado.Método: estudio cuasiexperimental (entrevistas enfermera-paciente realizado entre diciembre de 2004 y mayo de 2006, con unamuestra de 50 pacientes seleccionados por conveniencia. Se diseñó un instrumento para evaluar los comportamientos de los pacientes,con base en algunos resultados de la adherencia y sus respectivos indicadores de la taxonomía NOC (Nursing out comes classification. Laadherencia al tratamiento fue medida en dos momentos: el primero durante la hospitalización, seguido de la aplicación del plan educativoantes del alta, que proporcionaba información en el manejo de su enfermedad desde una dimensión física, psicológica y social quepromueve el autocuidado; y el segundo un mes después del alta en su domicilio.Resultados: diferencias estadísticamente significativas (P=0,0001 que demuestran cómo mediante la capacitación al paciente enel manejo de su tratamiento farmacológico y no farmacológico, el establecimiento de una sana relación entre el profesional de enfermeríay el paciente, y la participación de la familia, se logra una total adherencia al tratamiento.Conclusiones: para lograr una adherencia total del paciente con falla cardiaca al tratamiento es necesario un proceso educativo y unseguimiento continuo y personalizado que motive permanentemente al paciente y se le reconozca el papel protagónico en su cuidado y manejo de la enfermedad.

  12. Electrodeless excimer laser; Laser a eccimeri senza elettrodi

    Energy Technology Data Exchange (ETDEWEB)

    Lisi, N. [ENEA, Divisione Nuovi Materiali, Centro Ricerche Casaccia, Rome (Italy)

    2001-07-01

    In this paper it is proposed how to build an excimer laser based on an electrodeless discharge (or Dielectric Barrier Discharge). Such laser could operate with a low energy per pulse (<100 mJ) and a high repetition rate (<100 kHz). The most relevant advantage an electrodeless DBD laser is the much longer gas mixture lifetime. This feature could allow the operation of a sealed laser emitting higher average power with respect to commercially available excimer lasers. Such discharge scheme could be advantageous in order to excite the F{sub 2} excimer molecule, whose emission wavelength in the VUV range (157 nm) at high reprate is particularly interesting in the micro-lithography field. [Italian] In questo documento viene proposto come costruire un laser a eccimeri basato su una scarica priva di elettrodi, o Dielectric Barrier Discharge. Tale laser puo' funzionare con una bassa energia per impulso (<100 mJ) ad alta frequenza di ripetizione (<100 kHz). Il vantaggio fondamentale di un laser a DBD e quindi privo di elettrodi e' la vita media della miscela gassosa molto piu' alta che potrebbe permettere alla camera laser di operare sigillata ad una potenza media superiore a quella dei laser a eccimeri attuali. Tale schema di pompaggio potrebbe essere particolarmente vantaggioso per eccitare la molecola eccimero F{sub 2} la cui lunghezza di emissione nel VUV (157 nm) ad elevata frequenza di ripetizione presenta un notevole interesse nel campo della produzione di microcircuiti.

  13. Cementos con cenizas volantes

    Directory of Open Access Journals (Sweden)

    Ossa M., Mauricio

    1984-03-01

    additions of 20 and 30% .

    Casi la generalidad de los estudios realizados sobre cementos con adición de cenizas volantes se refieren a sus características y comportamiento en pastas, morteros y hormigones, siempre en relación con aquéllos del cemento portland. Esta vez, se desarrolló un trabajo experimental orientado a relacionar entre sí los cementos con adiciones de cenizas volantes y de puzolana natural. Para ello se fabricaron a escala de laboratorio cementos de ambos tipos, empleando como materias primas comunes clinker y yeso y, como variables, diferentes porcentajes de las dos adiciones, que cumplieron previamente los requisitos normalizados en cuanto a sus actividades puzolánicas. La calidad de los cementos fabricados resultó adecuada y concordante con la del cemento portland-puzolánico obtenido a escala industrial con los mismos clinker, yeso y puzolana natural de este estudio. Posteriormente, se determinaron las características de los cementos experimentales y se confeccionaron morteros normales para la realización de ensayos físicos y mecánicos. Los resultados de ensayos indicaron que los cementos con adición de cenizas volantes (CCV requieren menos agua para consistencia normal, presentan tiempos de fraguado mayores y expansiones en autoclave menores que los cementos con adición de puzolana (CP. Los calores de hidratación a 7 y 28 días de edad fueron aproximadamente similares para ambos tipos de cemento. En morteros normales, los cementos CCV mostraron menor retracción de secado, mayor retentividad y mayor fluidez (para igual cantidad de agua que los cementos CP. En los ensayos de exudación se observó que ésta depende más de la finura que el tipo de adición. Finalmente, los ensayos mecánicos señalaron que las resistencias a compresión y flexotracción de los morteros con cementos CCV son menores a edades inferiores que 14 días (del orden de 5 a 10% a un día de edad, pero que a partir de entonces pasan a ser mayores que las de

  14. Investigation of laser cleaning on bronze cultural relics

    International Nuclear Information System (INIS)

    Ling, Xiulan; Wang, Gao; Zhang, Chen

    2016-01-01

    The effects of laser cleaning on the corrosion layers of bronze cultural relics were studied using a pulsed fiber laser. The laser cleaning threshold value of the corrosion layers was obtained. It was found that the corrosion layer was removed successfully by employing a laser fluence value of 0.32 J cm −2 and scanning for three times. To obtain experimental evidence, laser con-focal scanning microscopy, scanning electron microscopy (SEM), energy dispersive x-ray spectroscopy (EDS), laser induced breakdown spectroscopy (LIBS) and laser Raman spectroscopy were employed to investigate the cleaning efficiency of corrosion layers on specimens. (paper)

  15. competencia con China

    Directory of Open Access Journals (Sweden)

    Elena de la Paz Hernández Águila

    2007-01-01

    Full Text Available El artículo ofrece un diagnóstico del desempeño de la industria mexicana del calzado desde la década de los ochenta hasta la actualidad. Analiza la problemática que ha enfrentado esta rama industrial a partir del proceso de apertura comercial y de la competencia en su mercado interno con productos provenientes de países asiáticos, particularmente China. Problematiza al respecto los retos y las perspectivas que a mediano plazo enfrentará este sector empresarial y sobre las posibilidades de competir en el mercado globalizado.

  16. Construir con Madera

    OpenAIRE

    Olabe-Velasco, F. (Fermín); Val-Hernández, Y. (Yolanda); Varela-de-la-Cruz, P. (Perla); Cabrero-Ballarín, J.M. (José Manuel)

    2010-01-01

    Guía divulgativa ‘Construir con madera’, elaborada por la Cátedra Madera de la Universidad de Navarra y el Gobierno de Navarra. La publicación pretende explicar de forma sencilla los beneficios y posibilidades de este material en la construcción, tanto en lo que respecta a su resistencia, comportamiento frente al fuego, durabilidad, capacidad de aislamiento, propiedades acústicas, estética, respeto al medio ambiente y sostenibilidad como fuente de energía. A modo de ejemplo, en la ...

  17. CO2 laser cutting

    CERN Document Server

    Powell, John

    1998-01-01

    The laser has given manufacturing industry a new tool. When the laser beam is focused it can generate one of the world's most intense energy sources, more intense than flames and arcs, though similar to an electron beam. In fact the intensity is such that it can vaporise most known materials. The laser material processing industry has been growing swiftly as the quality, speed and new manufacturing possibilities become better understood. In the fore of these new technologies is the process of laser cutting. Laser cutting leads because it is a direct process substitu­ tion and the laser can usually do the job with greater flexibility, speed and quality than its competitors. However, to achieve these high speeds with high quality con­ siderable know how and experience is required. This information is usually carefully guarded by the businesses concerned and has to be gained by hard experience and technical understanding. Yet in this book John Powell explains in lucid and almost non­ technical language many o...

  18. Entrevista con Giovanni Levi

    Directory of Open Access Journals (Sweden)

    Monica Oliveira

    2017-06-01

    Full Text Available En esta entrevista, Giovanni Levi - como un conocedor del tema de Familia - realiza una importante evaluación sobre el actual estado de las investigaciones realizadas en el Brasil y em el exterior. Con estilo franco, agudo y lucido critica las visiones tradicionales y sus ilusiones ypropone nuevos conceptos y métodos. La historia de la familia debería ceder espacio para el estudio de las redes relacionales o de los mundos relacionales. De la misma forma, la historia cuantitativa debería abrir espacio para el estudio de las cualidades. Ya con relación a la historia de las elites, tan estudiada y reproducida en una diversidad de trabajos, que deberíase mirar en otra perspectiva. Es decir, no mirar a las reglas sociales predeterminadas, sino a los desvíos y a las variaciones. Levi defiende que los historiadores deben trascender a los documentos que se encuentran fácilmente y que pueden fortalecer perspectivas deformadas y esequilibradas de la sociedad. Para él, los historiadores deben esforzarse por estudiar a aquellos grupos que dejaron pocos rastros documentales. En ese esfuerzo existiría una nueva mirada sobre la historia de la familia.

  19. Entrevista con Patricia Ariza

    Directory of Open Access Journals (Sweden)

    Esperanza Londoño La Rotta

    2017-01-01

    Full Text Available Pensamiento, Palabra y Obra entrevista a una artista, feminista y activista política, quien como mujer y artista ha permitido pensar el arte más allá de un simple espectáculo. Toda una vida dedicada al teatro y a darle voz, a través de sus obras, a víctimas del conflicto colombiano, defensora de derechos humanos; además de hacer evidente en su vida y a través de la plataforma “Artistas por la paz”, las múltiples relaciones que se pueden establecer entre el arte, la construcción de paz y la resolución de conflictos. Hablamos en su casa, en medio del calor de la bienvenida con Patricia Ariza, directora del festival alternativo de teatro, de Mujeres en Escena y de la Corporación Colombiana de Teatro, entre otras muchas actividades que voluntariamente su espíritu libertario ha asumido. Esta entrevista se realizó antes del 2 de octubre, pero con la revisión de los acuerdos que propició el plebiscito ganado por una ínfima minoría por el no, sigue siendo vigente este planteamiento.

  20. The Newest Laser Processing

    International Nuclear Information System (INIS)

    Lee, Baek Yeon

    2007-01-01

    This book mentions laser processing with laser principle, laser history, laser beam property, laser kinds, foundation of laser processing such as laser oscillation, characteristic of laser processing, laser for processing and its characteristic, processing of laser hole including conception of processing of laser hole and each material, and hole processing of metal material, cut of laser, reality of cut, laser welding, laser surface hardening, application case of special processing and safety measurement of laser.

  1. preescolares desnutridos con madres con obesidad y sin obesidad

    Directory of Open Access Journals (Sweden)

    Viridiana Vanessa Conzuelo-González

    2009-01-01

    Full Text Available El primer objetivo fue conocer cuántos menores de cinco años con diferentes grados de desnutrición tienen una madre con sobrepeso/obesidad/ en una comunidad indígena que vive en extrema pobreza y bajo condiciones de migración masculina internacional. El segundo fue comparar tres variables socionutricionales (ingreso familiar, educación de la madre y adecuación nutrimental de la dieta diaria entre estos hogares y los hogares con desnutrición infantil y madres sin obesidad. Se realizó un estudio transversal (2006-2007, en la comunidad mazahua de San Francisco Tepeolulco, Municipio de Temascalcingo; que incluyó a 85 hogares integrados por preescolares con desnutrición inscritos al programa Oportunidades. Se determinó el estado nutrición de los preescolares con indicadores antropométricos y se obtuvo el IMC de las madres de estos infantes. Se aplicó una encuesta socionutricional, incluida el recordatorio de 24 horas, y complementado con la observación participante (cualitativa. Se encontró que 83% de las madres mazahuas presentaron sobrepeso u obesidad. El estado de nutrición de los preescolares con madres con obesidad presentó un porcentaje mayor de desnutrición (76%. En la variable género, se encontró que 54% de los niños con madres con obesidad tenía baja talla. Al relacionar el nivel educativo de la madre, esta variable resultó ser estadísticamente significativa (p=0.015, donde el analfabetismo está más relacionado con la desnutrición infantil que tienen madres de bajo y/o peso normal. La elevada prevalencia de hogares conformados con preescolares con desnutrición y madres con obesidad, es un síntoma más de la pobreza en zonas indígenas en México, con bajo índice de desarrollo humano.

  2. autorregulado con estudiantes universitarios

    Directory of Open Access Journals (Sweden)

    Jairo Andrés Montes

    2005-01-01

    Full Text Available El propósito del presente estudio es describir la forma en la que se presentan los procesos de aprendizaje autorregulado con un grupo de estudiantes (22 estudiantes de tercer semestre de Psicología de la PUJ, Cali, en el evento de preparación para la presentación un examen. Asimismo se describen las correlaciones que ocurren entre las distintas fases de dicho proceso de autorregulación del aprendizaje. Para conseguir los objetivos propuestos se ha hecho uso de una observación de desempeño en tiempo real, es decir, de la observación durante una sesión de preparación de examen de los estudiantes, en la cual se emplearon protocolos verbales para dar cuenta de lo que «pasaba por su mente» mientras estudiaban. Una entrevista semi-estructurada y una prueba objetiva. Los resultados fueron analizados a la luz del modelo mixto de procesamiento de información y constructivismo abordado por Winne(1998. Como resultado se encontró una relación significativa entre los niveles de desempeño en el proceso de ARR y el resultado del examen. Igualmente se encontraron bajos niveles de regulación en una parte importante de la muestra y un desfase significativo entre conocimiento declarativo de ARR y desempeño en el mismo

  3. Puentes con vigas pretensadas

    Directory of Open Access Journals (Sweden)

    Editorial, Equipo

    1965-07-01

    Full Text Available This paper describes one of the three bridges which Hidrocivil, S. A., has built in Catalonia (northern Spain, over the river Ripoll. The other two bridges are very similar to this one, both in construction and design, and show only minor adjustments to the local topography. The contracting firm proposed several alterations in the prefabrication and constructional procedure, in relation to the initial project, and these changes were accepted. The main feature of these projects is the use of prestressed beams, built at the workshop in sections, and joined together by means of sixty 7 mm cables in each beam. As the shear forces are more acute at the joints, the end of each section has a kind of diaphragm, to provide a large contact area, and hence greater surface to transmit the shear forces. The methods of construction are also of interest. Briefly, they involve building the bridge piles, and use these to support a provisional structure with transversal movement. This provisional structure, in turn, served as platform for two bridge cranes, which lifted the girders to their final location. After the first span was completed, the deck was concreted and the auxiliary structure pushed forward to the next span, to repeat the same operations. This arrangement saved the use of provisional framework.En este trabajo se describe uno de los tres puentes que Hidrocivil, S. A., ha construido.—previo concurso— en la región catalana; concretamente, el que salva el río Ripoll. Los otros dos no han sido objeto de descripción general por ser muy similares, en lo que a ejecución y concepción se refiere, con la única variante que presentan las características topográficas locales. La empresa propuso ciertas variantes— que fueron aceptadas— en la prefabricación y métodos de construcción. El interés de estas obras se centra en el empleo de vigas pretensadas, prefabricadas en taller por trozos, y solidarizados en el mismo mediante las operaciones

  4. Violencia con el anciano

    Directory of Open Access Journals (Sweden)

    Rita Campillo Motilva

    2002-08-01

    Full Text Available La violencia doméstica es tan antigua como la humanidad misma y se reconocen la violencia infantil, contra la mujer y al anciano, fundamentalmente; siendo este último grupo una población en ascenso por las mayores expectativas de vida de los últimos años. Como resultado de ello, el número de casos de abuso en el anciano se incrementará y el impacto de este abuso sobre la salud debe ser considerado de forma adecuada. La gama de maltratos es variadísima e incluye el abuso físico, emocional, financiero, sexual, por negligencia, negación a brindarle ayuda y otras formas más. Los ancianos con deterioro cognitivo son los más vulnerables. El médico en la atención primaria de salud es un pilar importante en la prevención y educación de este problema.Domestic violence is as old as humanity itself. Child, women and elderly abuse are mainly recognized. The elderly group is increasing due to the higher life expectancy experimented during the last years. As a result, the number of battered elderly will grow and the impact of this abuse on health should be adequately considered. The range of abuse is very wide and it includes physical, emotional, financial and sexual abuse, negligence, rejection to give assistance and others. The elderly with cognitive deterioration are the most vulnerable. The physician at the primary health care level is an important milestone in the prevention and education of this problem.

  5. Teledetección de Gases mediante Sensores Infrarrojo (IR)

    OpenAIRE

    López Martínez, Fernando

    2008-01-01

    El LIR- UC3M, Laboratorio de Sensores IR de la Universidad Carlos III, ha desarrollado técnicas de análisis multi e hiperespectral IR para la teledetección de gases. Ofrece el diseño de sensores específicos para determinar la presencia de gases y su concentración. La práctica totalidad de los gases (CO2, CO, NO2, O3, HC o NH, etc.) implicados en la seguridad industrial, ambiental o militar pueden ser detectados. Se busca empresas o centros interesados en el uso de sensores de aplicación e...

  6. Laser Therapy

    Science.gov (United States)

    ... for Every Season How to Choose the Best Skin Care Products In This Section Dermatologic Surgery What is dermatologic ... for Every Season How to Choose the Best Skin Care Products Laser Resurfacing Uses for Laser Resurfacing Learn more ...

  7. Characterization of the surface oxidation reaction and its influence on the radiation absorption during the surface laser hardening process of the 42CrMo4 steel; Caracterizacion de la reaccion de oxidacion superficial y su influencia sobre la absorcion de radiacion durante el proceso de temple superficial con laser para el acero 42CrMo4

    Energy Technology Data Exchange (ETDEWEB)

    Cordovilla, F.; Dominguez, J.; Sancho, P.; Garcia-Beltran, A.; Ocana, J. L.

    2016-10-01

    Surface laser hardening of steel is a process that produces an enormous interest due to its uncountable advantages in terms of quality and productivity against induction hardening The effective implantation of this process, nevertheless, is been hampered because of the lack of reliable and flexible predictive tools. There are different models focused on the temperature calculation, thought, few make a thorough analysis of the surface oxidation associated with the process and its important implications over the absorption coefficient. This work proposes and explains a coupled model temperature/ oxidation available in literature, applied, for the first time, for the simulation of simple processes carried out with different conditions of power and speed, for the 42CrMo4 steel. These conditions have been reproduced experimentally, tracking the maximum surface temperature and the oxide thickness. Both results have shown a high degree of coincidence whit theoretical predictions, confirming the capabilities and utility of the model. (Author)

  8. Lasers technology

    International Nuclear Information System (INIS)

    2014-01-01

    The Laser Technology Program of IPEN is developed by the Center for Lasers and Applications (CLA) and is committed to the development of new lasers based on the research of new optical materials and new resonator technologies. Laser applications and research occur within several areas such as Nuclear, Medicine, Dentistry, Industry, Environment and Advanced Research. Additional goals of the Program are human resource development and innovation, in association with Brazilian Universities and commercial partners

  9. Laser asga effect on the normal anatomy of the temporo mandibular joint (TMJ) on the rabbit

    OpenAIRE

    Matamala V, Fernando; Cornejo U, Ricardo; Vasconcellos C, Adriana; Silva M, Héctor

    2009-01-01

    El láser blando o infrarrojo es utilizado en clínica veterinaria por sus efectos analgésicos, antiinflamatorios, bioestimulantes y curativos, a fin de tratar lesiones y mejorar el proceso de cicatrización. El presente estudio tiene como propósito evaluar el efecto del láser infrarrojo de AsGa (10miliwatt,780 nanómetros, 2joule/cm²) sobre la articulación témporo mandibular (ATM) de conejo, para determinar las alteraciones que produce este tipo de irradiación sobre los tejidos normales. Se util...

  10. YCOB lasers

    International Nuclear Information System (INIS)

    Richardson, Martin; Hammons, Dennis; Eichenholz, Jason; Chai, Bruce; Ye, Qing; Jang, Won; Shah, Lawrence

    1999-01-01

    We review new developments with a new laser host material, YCa 4 O(BO 3 ) 3 or YCOB. Lasers based on this host material will open new opportunities for the development of compact, high-power, frequency-agile visible and near IR laser sources, as well as sources for ultrashort pulses. Efficient diode-pumped laser action with both Nd-doped and Yb-doped YCOB has already been demonstrated. Moreover, since these materials are biaxial, and have high nonlinear optical coefficients, they have become the first laser materials available as efficient self-frequency-doubled lasers, capable of providing tunable laser emission in several regions of the visible spectrum. Self-frequency doubling eliminates the need for inclusion of a nonlinear optical element within or external to the laser resonator. These laser materials possess excellent thermal and optical properties, have high laser-damage thresholds, and can be grown to large sizes. In addition they are non-hygroscopic. They therefore possess all the characteristics necessary for laser materials required in rugged, compact systems. Here we summarize the rapid progress made in the development of this new class of lasers, and review their potential for a number of applications. (author)

  11. Laser sampling

    International Nuclear Information System (INIS)

    Gorbatenko, A A; Revina, E I

    2015-01-01

    The review is devoted to the major advances in laser sampling. The advantages and drawbacks of the technique are considered. Specific features of combinations of laser sampling with various instrumental analytical methods, primarily inductively coupled plasma mass spectrometry, are discussed. Examples of practical implementation of hybrid methods involving laser sampling as well as corresponding analytical characteristics are presented. The bibliography includes 78 references

  12. HF laser

    International Nuclear Information System (INIS)

    Suzuki, Kazuya; Iwasaki, Matae

    1977-01-01

    A review is made of the research and development of HF chemical laser and its related work. Many gaseous compounds are used as laser media successfully; reaction kinetics and technological problems are described. The hybrid chemical laser of HF-CO 2 system and the topics related to the isotope separation are also included. (auth.)

  13. Acne polimorfo: tratamiento con Implacen

    Directory of Open Access Journals (Sweden)

    Rubén Pérez Armas

    1995-06-01

    Full Text Available Se realiza el estudio de 40 pacientes con acné polimorfo, los que fueron atendidos en la Consulta de Dermatología del Hospital Provincial Clinicoquirúrgico Docente "Celia Sánchez Manduley", en el período comprendido de enero de 1988 a diciembre de 1989. Se revisa la literatura médica sobre los diversos métodos y medicamentos utilizados en la terapéutica de esta dermatosis. Se describe el esquema de tratamiento empleado con implacén en 30 pacientes; los 10 restantes se trataron con placebo; se compara dicho esquema con los tradicionales y se observan mejores resultados con nuestro estudio. Se destaca la ausencia de recaídas, así como el resultado del tratamiento de acuerdo con el sexo.A study was performed in 40 patients presenting with polymorphic acne who were attended in the Dermatology Department of "Celia Sánchez Manduley" Clinicosurgical and Teaching Hospital from January, 1988 to December, 1989. A review of the literature was made seeking for the different methods and drugs used for the treatment of this dermatosis. The treatment schedule with the use of implacen in 30 patients is described. Such therapeutic schedule was compared with traditional ones and better results were observed with the use of implacen. The fact that there were no relapses is highlighted, as well as the result of treatment according to sex.

  14. Evaluación de parámetros fisiológicos en función de la saturación de oxigeno muscular en mujeres con sobrepeso y obesidad. [Evaluation physiological parameters depending on muscle oxygen saturation in overweight and obesity].

    Directory of Open Access Journals (Sweden)

    Aldo Alfonso Vasquez-Bonilla

    2017-01-01

    Full Text Available El objetivo de este estudio fue evaluar parámetros fisiológicos para comparar y correlacionar en función de la saturación de oxigeno muscular y hemoglobina total medida con espectroscopia de infrarrojo cercano no invasivo. La muestra (n=17 mujeres se dividieron en 2 grupos: sobrepeso/obesidad y normopeso, se valoró la composición corporal, parámetros fisiológicos, saturación de oxigeno muscular e indicie de esfuerzo percibido durante la prueba de esfuerzo incremental máxima en un cicloergometro en base a cuatro zonas metabólicas establecidas: fatmax, umbral aeróbico, umbral anaeróbico y zona de consumo máximo de oxígeno. Los resultados se analizaron utilizando el método estadístico Anova de un factor y la correlación de pearsón. Los resultados encontrados en el grupo normopeso la saturación de oxigeno muscular tiene correlación positiva alta con el vo2max durante la zona fatmax y umbral aeróbico (r=0,72- p=0,04 (r=0,77 – p=0,02, la frecuencia cardíaca de entrenamiento (r= -0,87 – p=0,01 tiene correlación negativa muy alta en la zona umbral anaeróbico, en el grupo sobrepeso obesidad no se encontró ninguna correlación. En conclusión las mujeres con normopeso la saturación de oxigeno muscular medida con espectroscopia de infrarrojo cercano no invasivo puede ser un buen parámetro fisiológico para programar ejercicio en la zonas fatmax, umbral aeróbico y umbral anaeróbico, pero en las mujeres con sobrepeso y obesidad se necesitan más estudios. Abstract The objective of this study was to compare physiological parameters and correlate function of muscle oxygen saturation and total hemoglobin measured with near-infrared spectroscopy noninvasive. The sample (n = 17 women were divided into 2 groups: overweight / obese and normal weight, was measured body composition, physiological parameters, saturation of muscle oxygen and index of perceived exertion during testing maximum incremental exercise on a cycle ergometer

  15. Novel Nonlinear Laser Diagnostic Techniques

    Science.gov (United States)

    1993-07-01

    a thermometric probe of reactive flows. Since the two-photon pump laser couples a Doppler broadened ground state velocity distribution to the excited...rism, and passed unfocused into an aluminum cell con- in frequency space. Regions for line fitting are found by taining 99% pure NO. The gas mixture...of ASE as a More recently, ASE has prompted interest as an thermometric probe of combustion environments optical diagnostic of combustion environments

  16. con mala calidad de vida

    Directory of Open Access Journals (Sweden)

    Agustín Martín-Rodríguez

    2007-01-01

    Full Text Available En este estudio ex post facto se ha analizado si los familiares de pacientes con mala calidad de vida presentan diferencias en las variables clínicas de personalidad y relaciones familiares en función de que el paciente haya estado o no ingresado en una Unidad de Cuidados Intensivos. Seleccionamos dos grupos: 29 familiares de pacientes traumatizados graves transcurridos cuatro años de su ingreso en una UCI de Traumatología y con mala calidad de vida (debido a secuelas físicas y/o psicológicas tras el ingreso, tales como traumatismos craneoencefálicos, politraumatismos y tetraplejias traumáticas y 32 familiares de pacientes con mala calidad de vida con cuatro años de evolución de su enfermedad física (hipertensión, diabetes, artritis reumatoide y síndrome de intestino irritable que no han estado ingresados en la UCI. Para alcanzar nuestro objetivo empleamos una Encuesta Psicosocial y los siguientes instrumentos: Cuestionario de Análisis Clínico, Escala de Clima Social en la Familia y Escala de Adaptación Psicosocial de la Enfermedad. Los resultados mostraron que los familiares de pacientes con mala calidad de vida que estuvieron ingresados en la UCI hace cuatro años, presentan diferencias significativas en las variables agitación y expresividad comparados con los familiares de pacientes con mala calidad de vida que no han estado ingresados en la UCI.

  17. Direct metal laser sintering: a digitised metal casting technology.

    Science.gov (United States)

    Venkatesh, K Vijay; Nandini, V Vidyashree

    2013-12-01

    Dental technology is undergoing advancements at a fast pace and technology is being imported from various other fields. One such imported technology is direct metal laser sintering technology for casting metal crowns. This article will discuss the process of laser sintering for making metal crowns and fixed partial dentures with a understanding of their pros and cons.

  18. Direct Metal Laser Sintering: A Digitised Metal Casting Technology

    OpenAIRE

    Venkatesh, K. Vijay; Nandini, V. Vidyashree

    2013-01-01

    Dental technology is undergoing advancements at a fast pace and technology is being imported from various other fields. One such imported technology is direct metal laser sintering technology for casting metal crowns. This article will discuss the process of laser sintering for making metal crowns and fixed partial dentures with a understanding of their pros and cons.

  19. Análisis espectral de materiales geológicos en la Cordillera Volcánica Central de Costa Rica y su relación con la detección remota de anomalías

    Directory of Open Access Journals (Sweden)

    Rejas, J. G.

    2014-12-01

    ón de su información espectral diferenciada respecto de un fondo que se estima, bien de manera global para toda la escena, bien localmente por segmentación de la imagen o ventanas de búsqueda, para lo que resulta significativo la caracterización de patrones en base a las bandas diagnóstico de los materiales geológicos. El estudio se ha llevado a cabo a partir de rangos del espectro electromagnético del visible e infrarrojo cercano, infrarrojo de onda corta y térmico de cubos de datos hiperespectrales procedentes de los sensores aeroportados HyMAP y MASTER. Se han diseñado experimentos sobre escenarios semiurbanos y naturales de la CVC de diferente complejidad, analizando el comportamiento del detector de anomalías estándar RX (Reed & Xiaoli, 1990 y métodos distintos subespaciales y basados en proyección de imagen. Entre los métodos comparados con RX se propone uno nuevo denominado Detector de Anomalías de Fondo Térmico (DAFT, método que proyecta miembros puros espectrales sobre un subespacio térmico que define el fondo espectral, y que a su vez supone una variante de Projection Pursuit (Malpica et al., 2008. Se discuten los resultados obtenidos y se realiza una aproximación sobre las implicaciones en procesos geológicos, así como en análogos terrestres para exploración planetaria.

  20. Ageing evolution of foamed warm mix asphalt combined with reclaimed asphalt pavement; Evolución del envejecimiento en mezclas espumadas semicalientes con áridos reciclados

    Energy Technology Data Exchange (ETDEWEB)

    Perez-Martinez, M.; Marsac, P.; Gabet, T.; Pouget, S.; Hammoum, F.

    2017-07-01

    The combination of high rates of reclaimed asphalt pavement (RAP) and warm mix asphalt (WMA) technologies is still ambiguous in terms of durability. With the aim of clarifying this issue, a study comparing a hot mix asphalt with a WMA prepared using the foaming process technology. Both mixes contain 50% of RAP and are submitted to a laboratory ageing procedure. The long term related performance of the mixtures is compared by means of complex modulus and fatigue testing. Penetration and ring and ball tests are undertaken on the recovered bitumens, as well as the ageing evolution, characterised by the Fourier Transform Infrared analysis. Finally, the Apparent Molecular Weight Distribution (AMWD) of the binders is calculated from rheological measurements using the δ-method. Results show a relation between ageing evolution and mechanical performance. After ageing, the overall tendencies are similar for both processes. [Spanish] El comportamiento de mezclas asfálticas semicalientes (WMA) con alto contenido de material reciclado (RAP) es aún incierto a largo plazo. Por este motivo, en este estudio se compara el envejecimiento una mezcla caliente convencional y una mezcla espumada semicaliente con 50% de RAP. Ambas mezclas han sido sometidas a un proceso de envejecimiento en laboratorio. La respuesta a largo plazo se ha comparado a través de los ensayos de módulo de rigidez y de fatiga. En los betunes recuperados se han llevado a cabo los ensayos de penetración y anillo-bola, así como el seguimiento del envejecimiento a través del análisis de infrarrojos. Finalmente, la distribución de peso molecular aparente (AMWD) de los betunes se ha calculado a través de medidas reológicas usando el “δ-method”. En los resultados se observa una relación entre la evolución del envejecimiento y su respuesta mecánica, donde la tendencia general es similar para ambas técnicas.

  1. Tratamiento con implantes Leader-Nano en paciente con oligodoncia

    Directory of Open Access Journals (Sweden)

    Salvador Javier Santos Medina

    2015-03-01

    Full Text Available Los implantes dentales de titanio han revolucionado el mundo de la rehabilitación desde su surgimiento. De manera particular, el empleo de implantes de carga inmediata acorta el tiempo quirúrgico y protésico, con el consiguiente bienestar estético. Se presenta el caso de una paciente femenina de 32 años de edad, con antecedentes de oligodoncia de ambos incisivos laterales superiores y portadora de prótesis parcial acrílica. Fue atendida por el equipo multidisciplinario de implantes en la Clínica Estomatológica Docente “3 de Octubre” y se le realizó tratamiento de rehabilitación integral con implantes Leader-Nano y prótesis fija con corona acrílica sobre dichos implantes. La implantología fue satisfactoria en la paciente; la mejoría estética y funcional, así como la satisfacción de la paciente, fueron los principales logros obtenidos

  2. Laser fusion

    International Nuclear Information System (INIS)

    Eliezer, S.

    1982-02-01

    In this paper, the physics of laser fusion is described on an elementary level. The irradiated matter consists of a dense inner core surrounded by a less dense plasma corona. The laser radiation is mainly absorbed in the outer periphery of the plasma. The absorbed energy is transported inward to the ablation surface where plasma flow is created. Due to this plasma flow, a sequence of inward going shock waves and heat waves are created, resulting in the compression and heating of the core to high density and temperature. The interaction physics between laser and matter leading to thermonuclear burn is summarized by the following sequence of events: Laser absorption → Energy transport → Compression → Nuclear Fusion. This scenario is shown in particular for a Nd:laser with a wavelength of 1 μm. The wavelength scaling of the physical processes is also discussed. In addition to the laser-plasma physics, the Nd high power pulsed laser is described. We give a very brief description of the oscillator, the amplifiers, the spatial filters, the isolators and the diagnostics involved. Last, but not least, the concept of reactors for laser fusion and the necessary laser system are discussed. (author)

  3. Biocavity Lasers

    Energy Technology Data Exchange (ETDEWEB)

    Gourley, P.L.; Gourley, M.F.

    2000-10-05

    Laser technology has advanced dramatically and is an integral part of today's healthcare delivery system. Lasers are used in the laboratory analysis of human blood samples and serve as surgical tools that kill, burn or cut tissue. Recent semiconductor microtechnology has reduced the size o f a laser to the size of a biological cell or even a virus particle. By integrating these ultra small lasers with biological systems, it is possible to create micro-electrical mechanical systems that may revolutionize health care delivery.

  4. con dietas suplementadas con Cromo-L-metionina

    Directory of Open Access Journals (Sweden)

    Ram\\u00F3n Garc\\u00EDa-Castillo

    2006-01-01

    Full Text Available Un total de 48 cerdos (Sus scrofa domesticus; 24 machos castrados y 24 hembras cruzados (Yorkshire, Hampshire, Duroc y Landrace de 3,5 a 4,0 meses de edad y 60,0 ± 5,0 kg PV en finalización. Se alimentaron con dietas isoproteícas (14,5 % PC e isoenergéticas (3.400 kcal EM/kg de MS, adicionadas con Cr-L-metionina (MiCroPlex® (0, 200, 400 y 600 ppb. El experimento tuvo una duración de 45 días y se realizó de agosto a noviembre del 2002 en las instalaciones de la Universidad Autónoma Agraria Antonio Narro, localizada en Saltillo, Coahuila, México. Al tener los animales aproximadamente 95 kg PV, se tomó muestra de 15 ml de sangre por cada animal para determinar la concentración de glucosa, ácido úrico, creatinina, urea, proteinas totales y colesterol. Se aplicó un diseño completamente al azar con arreglo factorial 2 x 4; dos para el factor sexo y cuatro para nivel de cromo. Los metabolitos en suero no fueron afectados (P>0,05 por el factor sexo. La glucosa en suero disminuyó (P<0,05 y el colesterol incrementó (P<0,05 con cromo en la dieta. Se concluye que el Cr incrementa el metabolismo de glucosa y disminuye el de colesterol, con lo cual puede haber energía disponible para síntesis de proteína la cual es necesaria para el crecimiento de los animales

  5. High power lasers & systems

    OpenAIRE

    Chatwin, Chris; Young, Rupert; Birch, Philip

    2015-01-01

    Some laser history;\\ud Airborne Laser Testbed & Chemical Oxygen Iodine Laser (COIL);\\ud Laser modes and beam propagation;\\ud Fibre lasers and applications;\\ud US Navy Laser system – NRL 33kW fibre laser;\\ud Lockheed Martin 30kW fibre laser;\\ud Conclusions

  6. Recubrimiento de acero con polidopamina

    OpenAIRE

    Carrasco Rodríguez, Javier

    2013-01-01

    Se ha obtenido recubrimientos de polidopamina en acero mecánicamente resistentes y con tiempos de obtención relativamente pequeños a través de la polimerización de la dopamina bajo diferentes condiciones.

  7. Laser Dyes

    Indian Academy of Sciences (India)

    amplification or generation of coherent light waves in the UV,. VIS, and near IR region. .... ciency in most flashlamp pumped dye lasers. It is used as reference dye .... have led to superior laser dyes with increased photostabilities. For instance ...

  8. Santiago, una ciudad con temor

    Directory of Open Access Journals (Sweden)

    Enrique Oviedo S.

    1999-04-01

    Full Text Available El objetivo general de este artículo es evaluar los efectos de la inseguridad ciudadana en el uso del espacio público. Dicha evaluación exige analizar dos relaciones que se establecen en el ámbito de la violencia: la relación entre victimización y percepción de inseguridad; y la que se establece entre actitudes sociales y resolución pacífica de conflictos nacionales. Para ello, se analizaron las variables victimización, percepción de inseguridad, uso del espacio físico, actitudes hacia el sistema institucional político y social y hacia la resolución de conflictos nacionales, y las posibles relaciones entre ellas. Los datos para realizar el estudio se obtuvieron por medio de una encuesta que se llevó a cabo con 1 200 personas de 18 y 70 años de edad residentes en la ciudad de Santiago. Los resultados indican que Santiago es una ciudad de habitantes con temor y que el aumento de la percepción de inseguridad de sus habitantes contrasta con el hecho de que las tasas de victimización se hayan mantenido, más o menos, constantes en los años que precedieron a la encuesta. El temor se relaciona con el abandono del espacio público físico y sociopolítico, así como con el refugio en los espacios y la vida privados. La actitud de resolver los conflictos por medios no pacíficos es frecuente y se asocia en mayor medida con la inseguridad, la actitud negativa hacia la democracia y la falta de expectativas sobre el futuro del país. Los resultados de este estudio respaldan la idea de que para superar el temor la gente tiende a adaptarse a la realidad adoptando una postura conformista, homogeneizando las creencias y los comportamientos, y sobreestimando la fuerza como medio para resolver las diferencias.

  9. Santiago, una ciudad con temor

    Directory of Open Access Journals (Sweden)

    Oviedo S. Enrique

    1999-01-01

    Full Text Available El objetivo general de este artículo es evaluar los efectos de la inseguridad ciudadana en el uso del espacio público. Dicha evaluación exige analizar dos relaciones que se establecen en el ámbito de la violencia: la relación entre victimización y percepción de inseguridad; y la que se establece entre actitudes sociales y resolución pacífica de conflictos nacionales. Para ello, se analizaron las variables victimización, percepción de inseguridad, uso del espacio físico, actitudes hacia el sistema institucional político y social y hacia la resolución de conflictos nacionales, y las posibles relaciones entre ellas. Los datos para realizar el estudio se obtuvieron por medio de una encuesta que se llevó a cabo con 1 200 personas de 18 y 70 años de edad residentes en la ciudad de Santiago. Los resultados indican que Santiago es una ciudad de habitantes con temor y que el aumento de la percepción de inseguridad de sus habitantes contrasta con el hecho de que las tasas de victimización se hayan mantenido, más o menos, constantes en los años que precedieron a la encuesta. El temor se relaciona con el abandono del espacio público físico y sociopolítico, así como con el refugio en los espacios y la vida privados. La actitud de resolver los conflictos por medios no pacíficos es frecuente y se asocia en mayor medida con la inseguridad, la actitud negativa hacia la democracia y la falta de expectativas sobre el futuro del país. Los resultados de este estudio respaldan la idea de que para superar el temor la gente tiende a adaptarse a la realidad adoptando una postura conformista, homogeneizando las creencias y los comportamientos, y sobreestimando la fuerza como medio para resolver las diferencias.

  10. Laser spectroscopy

    CERN Document Server

    Demtröder, Wolfgang

    2008-01-01

    Keeping abreast of the latest techniques and applications, this new edition of the standard reference and graduate text on laser spectroscopy has been completely revised and expanded. While the general concept is unchanged, the new edition features a broad array of new material, e.g., frequency doubling in external cavities, reliable cw-parametric oscillators, tunable narrow-band UV sources, more sensitive detection techniques, tunable femtosecond and sub-femtosecond lasers (X-ray region and the attosecond range), control of atomic and molecular excitations, frequency combs able to synchronize independent femtosecond lasers, coherent matter waves, and still more applications in chemical analysis, medical diagnostics, and engineering.

  11. Laser spectroscopy

    CERN Document Server

    Demtröder, Wolfgang

    Keeping abreast of the latest techniques and applications, this new edition of the standard reference and graduate text on laser spectroscopy has been completely revised and expanded. While the general concept is unchanged, the new edition features a broad array of new material, e.g., ultrafast lasers (atto- and femto-second lasers) and parametric oscillators, coherent matter waves, Doppler-free Fourier spectroscopy with optical frequency combs, interference spectroscopy, quantum optics, the interferometric detection of gravitational waves and still more applications in chemical analysis, medical diagnostics, and engineering.

  12. pacientes con insuficiencia renal terminal

    Directory of Open Access Journals (Sweden)

    Karen Herrera Herrera

    2011-01-01

    Full Text Available La presente investigación fundamenta en la clínica psicoanalítica el estudio de dos casos de tres personas diagnosticadas con IRT que reciben tratamiento de hemodiálisis, en razón a que dadas las características y el aumento de los reportes que se presentan, ya esto se considera un problema de salud pública. El objetivo principal es describir las características dinámicas del proceso de duelo en pacientes con IRT en un centro de terapia renal de la ciudad de Cartagena. El procedimiento metodológico empleó un diseño de tipo cualitativo; la investigación se desarrolló con un diseño clínico mediante el estudio de casos, y fundamentada en la hermenéutica psicoanalítica. Todo esto respaldado en la historia clínica, la entrevista semiestructurada individual y familiar, los test proyectivos, test del dibujo de la figura humana Machover y TAT de Murray, para la debida integración de los análisis. Se concluye que predominan funciones fallidas de los progenitores y que son individuos provenientes de familias psicosomáticas, que utilizan la enfermedad para obtener un beneficio secundario.

  13. con bajo peso al nacer

    Directory of Open Access Journals (Sweden)

    Adriana Mora Antó

    2005-01-01

    Full Text Available Esta investigación dio cuenta de la relación entre el estilo de funcionamiento familiar, los patrones de crianza y las edades de desarrollo evolutivo en niños, nacidos con bajo peso. El estudio descriptivo correlacional se realizó con 41 niños y sus madres, aplicándose cuestionarios sobre funcionamiento familiar, prácticas de crianza y desarrollo infantil. Los resultados señalaron la existencia de un funcionamiento familiar caracterizado por una cohesión amalgamada y una adaptabilidad caótica, una disciplina complaciente, falta de control y de límites claros en la díada madre-hijo. Se trataba de familias monoparentales, donde la temprana edad de concepción, el madresolterismo y el apoyo de la familia extensa eran constantes. Las edades evolutivas registradas indicaron un desarrollo inferior a la edad cronológica, en la mayor parte de los casos; sin embargo, éstas tendieron a ser superiores al compararlas con la edades reales de los infantes. No se encontró una correlación estadísticamente significativa entre la edad de desarrollo y los diferentes factores del funcionamiento familiar para algunos de los rangos de edad considerados; sin embargo, no se lo descartó por completo, especialmente en lo referente al optimismo familiar

  14. Il laser

    CERN Document Server

    Smith, William V

    1974-01-01

    Verso il 1960, il laser era ancora "una soluzione alla ricerca di un problema", ma fin dagli anni immediatamente successivi si è rivelato uno strumento insostituibile per le applicazioni più svariate.

  15. Laser Refractography

    CERN Document Server

    Rinkevichyus, B.S; Raskovskaya, I.L

    2010-01-01

    This book describes the basic principles of laser refractography, a flexible new diagnostic tool for measuring optically inhomogeneous media and flows. Laser refractography is based on digital imaging and computer processing of structured laser beam refraction (SLR) in inhomogeneous transparent media. Laser refractograms provide both qualitative and quantitative measurements and can be used for the study of fast and transient processes. In this book, the theoretical basis of refractography is explored in some detail, and experimental setups are described for measurement of transparent media using either 2D (passed radiation) or 3D (scattered radiation) refractograms. Specific examples and applications are discussed, including visualization of the boundary layer near a hot or cold metallic ball in water, and observation of edge effects and microlayers in liquids and gases. As the first book to describe this new and exciting technique, this monograph has broad cross-disciplinary appeal and will be of interest t...

  16. Laser fusion

    International Nuclear Information System (INIS)

    Ashby, D.E.T.F.

    1976-01-01

    A short survey is given on laser fusion its basic concepts and problems and the present theoretical and experimental methods. The future research program of the USA in this field is outlined. (WBU) [de

  17. Laser spectroscopy

    International Nuclear Information System (INIS)

    Letokhov, V.S.

    1981-01-01

    This article describes recent progress in the application of laser atomic spectroscopy to study parameters of nuclei available in very small quantities; radioactive nuclei, rare isotopes, nuclear isomers, etc, for which study by conventional spectroscopic methods is difficult. (author)

  18. Energy saving using solar filters with iron base in windows; Ahorro de energia usando filtros solares con base en hierro en ventanas

    Energy Technology Data Exchange (ETDEWEB)

    Chavez Galan, Jesus

    2003-07-01

    termico generado al interior de las edificaciones por las inadecuadas propiedades de los materiales de construccion, se desarrollaron en este trabajo filtros solares con base en hierro por medio de los cuales se logra un control selectivo de la radiacion solar que se transmite a traves de las ventanas. Estos filtros solares consisten en peliculas delgadas de FeO depositadas sobre sustratos de vidrio cal-sosa (el mas usado en nuestro pais para las edificaciones) de 600x300x3 mm, por medio de la tecnica de sputtering asistida con radiofrecuencia y magnetrones planos, partiendo de un blanco de hierro puro de 127x254 mm y usando un plasma de argon. Para obtener el grado de oxidacion deseado en el hierro, pequenas muestras (45 x 22 mm) fueron sometidas a un proceso de calentamiento en una atmosfera reductora constituida de 50% H{sub 2} + 50% N{sub 2}, durante un periodo de tiempo de 10 minutos a una temperatura de 400 C. Los filtros solares con base en FeO presentan una transmisividad de 30.2% para el intervalo visible del espectro electromagnetico (radiacion con longitud de onda de 380-780 nm), y de 39.9% para el infrarrojo cercano (radiacion con longitud de onda de 780-2500 nm); mientras que su reflectividad es de 17.5 y 19%, para los intervalos visibles e infrarrojo cercano del espectro electromagnetico respectivamente. Se realizo una simulacion, a traves del software Energy 10, del comportamiento energetico de una casa-habitacion cuando utilizan en las ventanas vidrios simples (una lamina) tipo cal-sosa, asi como tambien cuando esta misma edificacion usa en las ventanas los filtros solares con base en FeO desarrollados. Ambos casos se comparan obteniendose asi los posibles ahorros de energia por el uso de dichos filtros solares en las ventanas. Las simulaciones fueron llevadas a cabo para diferentes localidades del pais, obteniendose que los filtros solares con base en FeO desarrollados, permiten ahorros de energia principalmente por concepto de acondicionamiento de aire

  19. An All-Solid-State High Repetiton Rate Titanium:Sapphire Laser System For Resonance Ionization Laser Ion Sources

    Science.gov (United States)

    Mattolat, C.; Rothe, S.; Schwellnus, F.; Gottwald, T.; Raeder, S.; Wendt, K.

    2009-03-01

    On-line production facilities for radioactive isotopes nowadays heavily rely on resonance ionization laser ion sources due to their demonstrated unsurpassed efficiency and elemental selectivity. Powerful high repetition rate tunable pulsed dye or Ti:sapphire lasers can be used for this purpose. To counteract limitations of short pulse pump lasers, as needed for dye laser pumping, i.e. copper vapor lasers, which include high maintenance and nevertheless often only imperfect reliability, an all-solid-state Nd:YAG pumped Ti:sapphire laser system has been constructed. This could complement or even replace dye laser systems, eliminating their disadvantages but on the other hand introduce shortcomings on the side of the available wavelength range. Pros and cons of these developments will be discussed.

  20. Laser fusion

    International Nuclear Information System (INIS)

    Key, M.H.; Oxford Univ.

    1990-04-01

    The use of lasers to drive implosions for the purpose of inertially confined fusion is an area of intense activity where progress compares favourably with that made in magnetic fusion and there are significant prospects for future development. In this brief review the basic concept is summarised and the current status is outlined both in the area of laser technology and in the most recent results from implosion experiments. Prospects for the future are also considered. (author)

  1. Laser Resurfacing

    OpenAIRE

    Janik, Joseph P.; Markus, Jodi L.; Al-Dujaili, Zeena; Markus, Ramsey F.

    2007-01-01

    In a society desiring images of beauty and youthfulness, the world of cutaneous surgery offers the gifts of facial rejuvenation for those determined to combat the signs of aging. With the development of novel laser and plasma technology, pigmentary changes, scarring, and wrinkles can be conquered providing smoother, healthier, younger-looking skin. This review highlights five of the most popular resurfacing technologies in practice today including the carbon dioxide (CO2) laser, the erbium:yt...

  2. Green lasers

    DEFF Research Database (Denmark)

    Jensen, Ole Bjarlin

    2010-01-01

    Well over a dozen papers at this year's Photonics West meeting in San Francisco boasted improvements in harmonic generation to produce visible laser beams, most of them in the green spectral range......Well over a dozen papers at this year's Photonics West meeting in San Francisco boasted improvements in harmonic generation to produce visible laser beams, most of them in the green spectral range...

  3. Recubrimientos superficiales con láseres de diodos de alta potencia

    Directory of Open Access Journals (Sweden)

    Molpeceres, J. L.

    1998-04-01

    Full Text Available Nowadays, high power diode laser systems are available in the market. These systems, based on arrays of small diode lasers, can achieve more than 1 kW of output power and are currently offering new possibilities in the field of laser material processing where CO2 and Nd:YAG lasers were used up to the present. The results obtained in some materials cladding based on cobalt and nickel alloys as additional materials is presented. The instrumental set-up used in these experiments are described.

    La posibilidad de disponer actualmente de láseres de diodos con una potencia de emisión óptica superior a 1 kW permite abordar un gran número de aplicaciones en el ámbito del procesado de materiales con láser, dominado tradicionalmente por los láseres de CO2 y Nd:YAG. En el presente trabajo, se muestra la aplicación de los láseres de diodos de alta potencia al recubrimiento de materiales metálicos con aleaciones de base cobalto y níquel. Se describen las características del sistema empleado y se muestran los resultados obtenidos.

  4. Conversando con...Momoyo Kaijima

    OpenAIRE

    Gómez Alonso, Carlos; Álvarez Isidro, Eva; Torres Barchino, Ana

    2017-01-01

    [ES] Momoyo Kaijima es profesora en la Facultad de Arte y Diseño de la Universidad de Tsukuba en la Prefectura de Ibaraki y profesora visitante en la ETH de Zürich, en Royal Academy of Fine Arts, en Rice School of Architecture y en Harvard GSD. A lo largo de los años, Atelier Bow Wow ha colaborado con Krešimir Rogina, arquitecto de Zagreb y socio de la firma internacional Penezic&Rogina, en la realización del Grožnjan International Summer School of Architecture, siendo Rogina el nexo indispen...

  5. Laser material processing

    CERN Document Server

    Steen, William

    2010-01-01

    This text moves from the basics of laser physics to detailed treatments of all major materials processing techniques for which lasers are now essential. New chapters cover laser physics, drilling, micro- and nanomanufacturing and biomedical laser processing.

  6. Laser therapy for cancer

    Science.gov (United States)

    ... this page: //medlineplus.gov/ency/patientinstructions/000905.htm Laser therapy for cancer To use the sharing features ... Lasers are also used on the skin. How Laser Therapy is Used Laser therapy can be used ...

  7. Lasers in Cancer Treatment

    Science.gov (United States)

    ... the advantages of laser therapy? What are the disadvantages of laser therapy? What does the future hold ... therapy is appropriate for them. What are the disadvantages of laser therapy? Laser therapy also has several ...

  8. Practical laser safety

    International Nuclear Information System (INIS)

    Winburn, D.C.

    1985-01-01

    This book includes discussions of the following topics: characteristics of lasers; eye components; skin damage thresholds; classification of lasers by ANSI Z136.1; selecting laser-protective eyewear; hazards associated with lasers; and, an index

  9. Food irradiation - pros and cons

    International Nuclear Information System (INIS)

    1983-01-01

    The use of ionising radiation for food preservation is a much-disputed topic, both among experts and among consumers. Pros and cons of this issue were discussed in detail at the consumers' forum. Professor Dr. Johannes Friedrich Diehl, Director of the Institute for Biochemistry of the Food Research Centre, Karlsruhe, is a well-known supporter of the new method of food preservation; he sees advantages in the radiopreservation of food because, for example, losses due to inedibility are reduced, the danger of salmonellosis is decreased, just as the use of chemicals. He thinks this method to be without danger to health, shown by many years of experience. Opponents to food irradiation like Prof. Dr. Konrad Pfeilsticker, Professor for food science and food chemistry at the Bonn University deem the method to be unnecessary and raise the problem of qualitative changes caused in the food. In the course of the discussions, the pros and cons seemed to balance each other out. (orig./AJ) [de

  10. De paseo con los Bourbaki

    Directory of Open Access Journals (Sweden)

    Miquel Escudero

    2012-04-01

    Full Text Available Setenta y siete años después de la fundación del grupo Bourbaki, procedemos a una reflexión que puede ser útil para los estudiantes que acaso no sepan de su existencia, ni tan siquiera los de matemáticas. Sería interesante conocer que a este grupo se le debe el signo del vacío como conjunto. Con todo lo discutible que sea el método Bourbaki en su reinterpretación de la matemática, no cabe duda de su importante repercusión hasta el punto de que ha marcado una época. Hay un antes y un después tras su irrupción, ningún matemático de primera fila de la segunda mitad del siglo XX fue ajeno a su influjo, para encabezarlo o para reprobarlo. Comenzaron como una juvenil extravagancia, pero repleta de conocimientos y con decidida voluntad de aprehender el rigor de forma exhaustiva.

  11. Tratamiento del paciente con artrosis

    Directory of Open Access Journals (Sweden)

    Francisco Vargas Negrín

    2014-01-01

    Full Text Available El manejo terapéutico del paciente con artrosis tiene como objetivo disminuir la sintomatología dolorosa e inflamatoria, mejorar la capacidad funcional del paciente y la aplicación de intervenciones terapéuticas eficaces y lo más seguras posibles. Un enfoque centrado en el paciente implica su participación activa en el diseño del plan terapéutico y en la toma de decisiones informadas oportunas en todas las etapas de la enfermedad. La educación terapéutica, la actividad física y el ejercicio terapéutico junto con el control de peso, en caso de sobrepeso u obesidad, constituyen el núcleo central del tratamiento. Los autocuidados individuales y por los familiares son fundamentales en el control del día a día del paciente. El uso de terapias físicas, ayudas técnicas (bastón, etc. y de fármacos tipo analgésicos simples, opioides y antiinflamatorios tiene evidencias demostradas en el control del dolor, mejora la funcionalidad y la calidad de vida del paciente y una clara recomendación de uso en el tratamiento de la artrosis. La cirugía conservadora y la de reemplazo articular se indican en los casos en los que no se logran los objetivos terapéuticos en casos concretos.

  12. Laser acceleration

    Science.gov (United States)

    Tajima, T.; Nakajima, K.; Mourou, G.

    2017-02-01

    The fundamental idea of Laser Wakefield Acceleration (LWFA) is reviewed. An ultrafast intense laser pulse drives coherent wakefield with a relativistic amplitude robustly supported by the plasma. While the large amplitude of wakefields involves collective resonant oscillations of the eigenmode of the entire plasma electrons, the wake phase velocity ˜ c and ultrafastness of the laser pulse introduce the wake stability and rigidity. A large number of worldwide experiments show a rapid progress of this concept realization toward both the high-energy accelerator prospect and broad applications. The strong interest in this has been spurring and stimulating novel laser technologies, including the Chirped Pulse Amplification, the Thin Film Compression, the Coherent Amplification Network, and the Relativistic Mirror Compression. These in turn have created a conglomerate of novel science and technology with LWFA to form a new genre of high field science with many parameters of merit in this field increasing exponentially lately. This science has triggered a number of worldwide research centers and initiatives. Associated physics of ion acceleration, X-ray generation, and astrophysical processes of ultrahigh energy cosmic rays are reviewed. Applications such as X-ray free electron laser, cancer therapy, and radioisotope production etc. are considered. A new avenue of LWFA using nanomaterials is also emerging.

  13. Laser acceleration

    International Nuclear Information System (INIS)

    Tajima, T.; Nakajima, K.; Mourou, G.

    2017-01-01

    The fundamental idea of LaserWakefield Acceleration (LWFA) is reviewed. An ultrafast intense laser pulse drives coherent wakefield with a relativistic amplitude robustly supported by the plasma. While the large amplitude of wake fields involves collective resonant oscillations of the eigenmode of the entire plasma electrons, the wake phase velocity ∼ c and ultra fastness of the laser pulse introduce the wake stability and rigidity. A large number of worldwide experiments show a rapid progress of this concept realization toward both the high-energy accelerator prospect and broad applications. The strong interest in this has been spurring and stimulating novel laser technologies, including the Chirped Pulse Amplification, the Thin Film Compression, the Coherent Amplification Network, and the Relativistic Mirror Compression. These in turn have created a conglomerate of novel science and technology with LWFA to form a new genre of high field science with many parameters of merit in this field increasing exponentially lately. This science has triggered a number of worldwide research centers and initiatives. Associated physics of ion acceleration, X-ray generation, and astrophysical processes of ultrahigh energy cosmic rays are reviewed. Applications such as X-ray free electron laser, cancer therapy, and radioisotope production etc. are considered. A new avenue of LWFA using nano materials is also emerging.

  14. Cons ICARUS, TIGER and Fascism

    Directory of Open Access Journals (Sweden)

    Janez Vrečko

    2010-12-01

    Full Text Available Like the scientists of their time, Russian artists in the 1920s considered gravity the central problem – a view which points to the close harmony between modern physics and the avant-garde. It was only with the constructivist movement that the Icarus revolution grasped the principles of the “mobile philosophy” (3.651 which was almost at the same time recognised by modern physics as well. The static view of the world became obsolete, space and time were no longer absolute values. It was necessary to transcend Euclidean geometry, shake off the political ʻshackles on one’s hands’ and surrender to Lisicki’s imaginary space, where “At 2000 metres in the air / there is no more perspective” (Integrals 276.  Kosovel’s Icarus project accorded with Tatlin’s, and both of them accorded with the quintessential aims of the constructivist movement. It is no accident that Kosovel wished to name one of his poetry collections The Dream of Icarus. Poems on the Icarus theme, such as “Cons Icarus”, “Evacuation of the Spirit”, “Eh, Hey”, “A Heart in Alcohol” etc. belong to the group of Kosovel’s conses which follow his “mobile philosophy” (3.650 and “letters growing into space” (Int. 282.  The question “Man, do you want up in the air?” (Int. 128 will remain a question until the moment when man is finally ready to transcend the existing boundary and dive “beyond”. Hence Kosovel’s clear-cut contrast between the “green windows of an illuminated / express on a viaduct”, which moves horizontally and is, like a water current, subject to the earth’s gravity, and “the spirit in space”, whose direction of motion is “the perpendicular of the spirit”, atectonicity. “The spirit burns in space”: fire is an element that knows vertical movement alone, the only one of the elements to outgrow and transcend the earth’s gravity, therefore it is associated with another mythological figure important for

  15. Laser Heterodyning

    CERN Document Server

    Protopopov, Vladimir V

    2009-01-01

    Laser heterodyning is now a widespread optical technique, based on interference of two waves with slightly different frequencies within the sensitive area of a photo-detector. Its unique feature – preserving phase information about optical wave in the electrical signal of the photo-detector – finds numerous applications in various domains of applied optics and optoelectronics: in spectroscopy, polarimetry, radiometry, laser radars and Lidars, microscopy and other areas. The reader may be surprised by a variety of disciplines that this book covers and satisfied by detailed explanation of the phenomena. Very well illustrated, this book will be helpful for researches, postgraduates and students, working in applied optics.

  16. Difraction spectrometry by laser beams

    Directory of Open Access Journals (Sweden)

    Frías, M.

    1988-12-01

    Full Text Available The advances in laser technology have permitted the development of numerous applications, in particular diffraction spectrometry by laser beams for the determination of the distribution curve of the particle sizes of different materials; this permits one to obtain the distribution of particle size in both wet and dry materials. In the present paper a brief description of the technique and its principles is offered. The results obtained with different materials-limestone clay, gypsum, Portland cement and siliceous materials are given.

    Los avances en la tecnología laser han permitido el desarrollo de múltiples aplicaciones, en concreto la espectrometría de difracción de rayos laser para la determinación de la curva de distribución del tamaño de partícula de diferentes materiales, y que permite la obtención de la misma tanto en seco como en húmedo. En este trabajo se hace una descripción breve de la técnica y de sus fundamentos. Se presentan resultados con diferentes materiales: caliza, arcilla, yeso, cemento Portland y materiales silíceos.

  17. Fare astronomia con piccoli telescopi

    CERN Document Server

    Gainer, Michael K

    2007-01-01

    Non sono necessariamente richiesti strumenti mastodontici per produrre risultati scientificamente validi nel campo dell’astronomia. Anche l’astrofilo dotato di un piccolo telescopio, con un diametro di soli 8-9 cm, può contribuire alla scienza del cielo realizzando utili osservazioni del Sole, della Luna, dei pianeti, delle comete, degli asteroidi, delle stelle doppie o variabili, delle nebulose e degli ammassi stellari. Il manuale di M.K. Gainer spiega quale sia la dotazione minima (un piccolo telescopio, un computer, una semplice fotocamera digitale), come utilizzarla, e quali siano le tecniche appropriate da adottare nelle osservazioni. Offre inoltre schemi per interpretare e ridurre i dati raccolti, nonché schede da compilare e da spedire ai centri di raccolta internazionali. Questo libro è il passaporto grazie al quale l’astrofilo può entrare a pieno titolo nel mondo affascinante della scienza astronomica.

  18. Comparación de la medición del grosor corneal central medido con el paquímetro incluido en el Wavelight® Ex500 Excimer Laser y el tomógrafo de cámara de Scheimpflug Pentacam® en sujetos sanos

    Directory of Open Access Journals (Sweden)

    Manuel Garza León

    2017-01-01

    Conclusiones: Nuestros resultados demuestran que el paquímetro incluido en el Wavelight® Ex500 Excimer Laser es una buena alternativa para la medición del grosor corneal central al Pentacam® en pacientes sanos.

  19. Laser polarimetry

    International Nuclear Information System (INIS)

    Goldstein, D.H.

    1989-01-01

    Polarimetry, or transmission ellipsometry, is an important experimental technique for the determination of polarization properties of bulk materials. In this technique, source radiation of known polarization is passed through bulk samples to determine, for example, natural or induced birefringence and dichroism. The laser is a particularly appropriate source for this technique because of its monochromaticity, collimation, and radiant intensity. Lasers of many different wavelengths in different spectral regions are now available. Laser polarimetry can be done in any of these wavelength regions where polarizing elements are available. In this paper, polarimetry is reviewed with respect to applications, sources used, and polarization state generator and analyzer configurations. Scattering ellipsometry is also discussed insofar as the forward scattering measurement is related to polarimetry. The authors then describe an infrared laser polarimeter which we have designed and constructed. This instrument can operate over large wavelength regions with only a change in source. Polarization elements of the polarimeter are in a dual rotating retarder configuration. Computer controlled rotary stages and computer monitored detectors automate the data collection. The Mueller formulation is used to process the polarization information. Issues and recent progress with this instrument are discussed

  20. excimer laser

    Indian Academy of Sciences (India)

    2014-01-07

    Jan 7, 2014 ... is necessary to deposit one order higher input electric power into gas medium than ... cross-sectional view of the laser system is shown in figure 2A. The system mainly consists ... Considering the simplicity and reliability of the.

  1. Laser device

    DEFF Research Database (Denmark)

    2013-01-01

    The present invention provides a light source for light circuits on a silicon platform. A vertical laser cavity is formed by a gain region arranged between a first mirror structure and a second mirror structure, both acting as mirrors, by forming a grating region including an active material...

  2. Progress in metal-insulator-metal waveguide lasers at near-infrared wavelengths

    NARCIS (Netherlands)

    Marell, M.J.H.; Hill, M.T.

    2009-01-01

    Strong light con¯nement can be achieved in metallic cavities which can con¯ne light to volumes with dimensions considerably smaller than the wavelength of light. It was commonly believed, however, that the high losses in metals are prohibitive for laser peration in metallic nano-cavities. Recently

  3. Statistical model of intensity noise in con focal fluorescence microscopy images

    International Nuclear Information System (INIS)

    Montereali, R.M.; Almaviva, S.; Franzini, I.; Somma, F.

    2008-01-01

    The visible photoluminescence of aggregate F2 and F3+ color centers in Lithium Fluoride (LiF) thin layers, grown by thermal evaporation on various substrates (either crystalline or not) with different thicknesses, can be efficiently observed by using an optical con focal fluorescence microscope and a laser pump with emission wavelength tuned at about 450 nm. Starting from con focal fluorescence images of uniformly colored LiF samples, an automatic routine for the estimation of photoluminescence intensity noise has been developed at the Solid State Laser Laboratory and Spectroscopy of the ENEA Research Center in Frascati. We reported experimental results about application of that routine to the photoluminescence of LiF thin films, uniformly irradiated with an X-ray tube with energy spectrum centered on the Cu K? emission line (8,03 keV), at the CNR-IFN in Rome, that allow to identify a suitable statistical model for his description [it

  4. Laser Propulsion - Is it another myth or a real potential?

    International Nuclear Information System (INIS)

    Cook, Joung R.

    2008-01-01

    This paper discusses different principles of inducing propulsive power using lasers and examines the performance limits along with pros and cons with respect to different space propulsion applications: satellite launching, orbital transfer, space debris clearing, satellite propulsion, and space travels. It concludes that a use of electrical propulsion, in conjunction with laser power beaming, is the most feasible application with technological and economic advantages for commercial use within the next decades

  5. Nanowire Lasers

    Directory of Open Access Journals (Sweden)

    Couteau C.

    2015-05-01

    Full Text Available We review principles and trends in the use of semiconductor nanowires as gain media for stimulated emission and lasing. Semiconductor nanowires have recently been widely studied for use in integrated optoelectronic devices, such as light-emitting diodes (LEDs, solar cells, and transistors. Intensive research has also been conducted in the use of nanowires for subwavelength laser systems that take advantage of their quasione- dimensional (1D nature, flexibility in material choice and combination, and intrinsic optoelectronic properties. First, we provide an overview on using quasi-1D nanowire systems to realize subwavelength lasers with efficient, directional, and low-threshold emission. We then describe the state of the art for nanowire lasers in terms of materials, geometry, andwavelength tunability.Next,we present the basics of lasing in semiconductor nanowires, define the key parameters for stimulated emission, and introduce the properties of nanowires. We then review advanced nanowire laser designs from the literature. Finally, we present interesting perspectives for low-threshold nanoscale light sources and optical interconnects. We intend to illustrate the potential of nanolasers inmany applications, such as nanophotonic devices that integrate electronics and photonics for next-generation optoelectronic devices. For instance, these building blocks for nanoscale photonics can be used for data storage and biomedical applications when coupled to on-chip characterization tools. These nanoscale monochromatic laser light sources promise breakthroughs in nanophotonics, as they can operate at room temperature, can potentially be electrically driven, and can yield a better understanding of intrinsic nanomaterial properties and surface-state effects in lowdimensional semiconductor systems.

  6. Depresion en pacientes con alteraciones del tiroides

    OpenAIRE

    Radanovic-Grguric´, Ljiljana; Filakovic´, Pavo; Barkic´, Jelena; Mandic´, Nikola; Karner, Ivan; Smoje, Juraj

    2003-01-01

    Nuestro estudio fue realizado en un grupo de 53 mujeres con disfunción tiroidea y 28 mujeres con depresión mayor. Empleamos la Escala de la Depresión de Hamilton, la Escala de Autoevaluación de la Depresión de Zung y la Escala sobre la Impresión Clínica Global. Los resultados del estudio demuestran que la mayoría de los pacientes con disfunción tiroidea se mostraron clínicamente significativos en cuanto al trastorno depresivo. Los episodios depresivos son más frecuentes en pacientes con hipot...

  7. Aprende Ajedrez con Rey - Parte 2

    OpenAIRE

    ESTÉVEZ MONTERO, RAÚL; Lloret Mauri, Jaime

    2016-01-01

    Es una pieza audiovisual creada con el objeto de atraer la atención de los niños de muy corta edad con el ajedrez y familiarizarlos con todas sus piezas y movimientos. Es una animación dirigida a un público infantil presentada por dibujos animados en 2D, en la que se ha intentado respetar en todo momento el argot de la comunidad ajedredística. En este video se presenta la segunda parte. Estévez Montero, R.; Lloret Mauri, J. (2016). Aprende Ajedrez con Rey - Parte 2. http://hdl.handle.net/1...

  8. Aprende Ajedrez con Rey - Parte 1

    OpenAIRE

    ESTÉVEZ MONTERO, RAÚL; Lloret Mauri, Jaime

    2016-01-01

    Es una pieza audiovisual creada con el objeto de atraer la atención de los niños de muy corta edad con el ajedrez y familiarizarlos con todas sus piezas y movimientos. Es una animación dirigida a un público infantil presentada por dibujos animados en 2D, en la que se ha intentado respetar en todo momento el argot de la comunidad ajedredística. En este video se presenta la primera parte. Estévez Montero, R.; Lloret Mauri, J. (2016). Aprende Ajedrez con Rey - Parte 1. http://hdl.handle.net/1...

  9. Excimer Laser Technology

    CERN Document Server

    Basting, Dirk

    2005-01-01

    This comprehensive survey on Excimer Lasers investigates the current range of the technology, applications and devices of this commonly used laser source, as well as the future of new technologies, such as F2 laser technology. Additional chapters on optics, devices and laser systems complete this compact handbook. A must read for laser technology students, process application researchers, engineers or anyone interested in excimer laser technology. An effective and understandable introduction to the current and future status of excimer laser technology.

  10. Laser ion sources

    Energy Technology Data Exchange (ETDEWEB)

    Bykovskij, Yu

    1979-02-01

    The characteristics a laser source of multiply-ionized ions are described with regard to the interaction of laser radiation and matter, ion energy spectrum, angular ion distribution. The amount of multiple-ionization ions is evaluated. Out of laser source applications a laser injector of multiple-ionization ions and nuclei, laser mass spectrometry, laser X-ray microradiography, and a laser neutron generators are described.

  11. Imágenes en infrarrojo cercano de baja altura sobre zonas de interés del PN-MaB Montseny : informe ejecutivo planificación de campañas de vuelo, procesamiento de imágenes y evaluación :

    OpenAIRE

    Lobo Aleu, Agustín

    2010-01-01

    La tecnología civil de pequeños vehículos aéreos no tripulados (miniUAV) puede representar una alternativa de bajo coste para fotografía digital al alcance de los presupuestos normales en aplicaciones de Conservación. Si la calidad y operatividad son suficientes, estos sistemas pueden ser una herramienta importante para adquirir información de alta resolución con la que apoyar la planificación y gestión de espacios protegidos. En este proyecto se han planificado 13 campañas en 7 sitios del P...

  12. Imágenes en infrarrojo cercano de baja altura sobre zonas de interés del PN-MaB Montseny: planificación de campañas de vuelo, procesamiento de imágenes y evaluación: informe ejecutivo

    OpenAIRE

    Lobo Aleu, Agustín

    2010-01-01

    La tecnología civil de pequeños vehículos aéreos no tripulados (miniUAV) puede representar una alternativa de bajo coste para fotografía digital al alcance de los presupuestos normales en aplicaciones de Conservación. Si la calidad y operatividad son suficientes, estos sistemas pueden ser una herramienta importante para adquirir información de alta resolución con la que apoyar la planificación y gestión de espacios protegidos. En este proyecto se han planificado 13 campañas en 7 sitios del...

  13. Implementación de la tecnología analítica de proesos (PAT) en algunos procesos de fabricación farmacéutica. Utilización de la espectroscopia del infrarrojo cercano (NIRS) y de técnicas de imagen qimica (CI)

    OpenAIRE

    Rosas Portugal, Juan Guillermo P.

    2012-01-01

    La industria farmacéutica es objeto de estrictas regulaciones que tienen por objeto asegurar la calidad de los productos que ofrecen al mercado; el aseguramiento de esta calidad se realiza mediante la determinación de parámetros de calidad a través de ensayos off-line en el producto terminado. Sin embargo, la complejidad de los métodos y la variedad de los mismos retrasa de forma importante la liberación del producto con las consiguientes pérdidas económicas y de competitividad para la empres...

  14. Implementación de la tecnología analítica de procesos (PAT) en algunos procesos de fabricación farmacéutica utilización de la espectroscopia del infrarrojo cercano (NIRS) y de técnicas de imagen química (CI) /

    OpenAIRE

    Rosas Portugal, Juan Guillermo P.

    2013-01-01

    La industria farmacéutica es objeto de estrictas regulaciones que tienen por objeto asegurar la calidad de los productos que ofrecen al mercado; el aseguramiento de esta calidad se realiza mediante la determinación de parámetros de calidad a través de ensayos off-line en el producto terminado. Sin embargo, la complejidad de los métodos y la variedad de los mismos retrasa de forma importante la liberación del producto con las consiguientes pérdidas económicas y de competitividad para la empres...

  15. Plantas cubanas con efecto antiinflamatorio

    Directory of Open Access Journals (Sweden)

    Ada Ivis Regalado Veloz

    Full Text Available La actividad antiinflamatoria suscita gran interés científico en el área farmacológica, debido a que muchas enfermedades en su evolución cursan por procesos inflamatorios (artritis reumatoide, ateroesclerosis, cáncer, diabetes, gota, asma, dermatitis, trastornos neurodegenerativos y diversas dolencias menores. Las enfermedades inflamatorias constituyen un problema de salud importante, debido a la falta de medicamentos eficaces y seguros para su uso por periodos prolongados. Hoy en día se trabaja en la búsqueda de alternativas de antiinflamatorios más seguros, en el que las plantas medicinales, una de las formas más antiguas de tratamiento, constituyen una elección a considerar. En este trabajo se realizó una revisión bibliográfica, sobre especies de plantas que crecen en Cuba que le reportan propiedades farmacológicas como antinflamatorios. En la revisión de la literatura se utilizó la base de datos Medline (vía PubMed, así como revistas nacionales desde el periodo de 2000 hasta el presente, con las palabras claves "inflamación" y "plantas cubanas antiinflamatorias" o "actividad antiinflamatoria" y "plantas medicinales".

  16. Hospitalidad, con y sin papeles

    Directory of Open Access Journals (Sweden)

    Ana Paula Penchaszadeh

    Full Text Available Resumen El objetivo de este artículo es vincular el trabajo sobre el archivo de Jacques Derrida con la experiencia de la hospitalidad. Se intentará mostrar que, por un lado, se trata siempre de los papeles, de la legitimidad que éstos otorgan o no tanto a nivel filosófico (deseo de poseer los papeles que autoricen tal o cual decisión interpretativa, como a nivel político ("tener papeles" como el principio básico de todo derecho a tener derechos, de todo derecho a la comunidad. Mas también, por otro lado, se intentará pensar aquello que arruina la idea misma de tener o no tener (papeles, la idea de propiedad, aquello que hace imposible fundar una decisión o identidad en última instancia y, por ende, una soberanía, una frontera. La hospitalidad, la llegada inminente del otro, representa un desafío político y ético para la filosofía: pues no se trata de un saber, sino de una experiencia transformando el sustrato del nos-otros, del ser común.

  17. Itinerari Musicali con la Wiild

    Directory of Open Access Journals (Sweden)

    Elisabetta Nanni

    2013-03-01

    Full Text Available La Wiild, acronimo di Wiimote Lavagna Digitale, è uno strumento didattico che utilizza il telecomando della Wii, il famoso gioco della Nintendo, insieme a un software libero, rendendolo così estremamente versatile. Non vincolato a software proprietario, il suo utilizzo è legato alla capacità dell’insegnante di ripartire dalla didattica, dalle risorse selezionate e dall’epistemologia di ogni singola disciplina, trovando così nel proprio contesto un ruolo per le tecnologie. Il contributo presenta ipotesi di lavoro per l’educazione musicale nella scuola secondaria di primo grado che si sviluppano sia attraverso lo studio del rapporto suono/segno con affinità pittoriche e successiva codificazione grafica, sia attraverso un’attività di laboratorio in cui co-costruire percorsi storico-musicali. La Wiild diventerà davvero utile ed efficace nel momento in cui, affiancando le risorse selezionate dal docente, verrà utilizzata senza essere notata, giocando un ruolo di strumento tecnologico «normale e trasparente».

  18. Dermatological laser treatment

    International Nuclear Information System (INIS)

    Moerk, N.J.; Austad, J.; Helland, S.; Thune, P.; Volden, G.; Falk, E.

    1991-01-01

    The article reviews the different lasers used in dermatology. Special emphasis is placed on the treatment of naevus flammeus (''portwine stain'') where lasers are the treatment of choice. Argon laser and pulsed dye laser are the main lasers used in vascular skin diseases, and the article focuses on these two types. Copper-vapour laser, neodymium-YAG laser and CO 2 laser are also presented. Information is provided about the availability of laser technology in the different health regions in Norway. 5 refs., 2 figs

  19. CO2-laser fusion

    International Nuclear Information System (INIS)

    Stark, E.E. Jr.

    1978-01-01

    The basic concept of laser fusion is described, with a set of requirements on the laser system. Systems and applications concepts are presented and discussed. The CO 2 laser's characteristics and advantages for laser fusion are described. Finally, technological issues in the development of CO 2 laser systems for fusion applications are discussed

  20. Bases tratadas con cemento, en California

    Directory of Open Access Journals (Sweden)

    Chinchilla, M.

    1962-05-01

    Full Text Available El uso de bases tratadas con cemento para autopistas se inició en el Estado de California en 1938, empleándose para carreteras con determinadas condiciones de tráfico. Inicialmente, se especificó el uso obligatorio de plantas mezcladoras para asegurar el debido control de las proporciones adecuadas.

  1. Project LASER

    Science.gov (United States)

    1990-01-01

    NASA formally launched Project LASER (Learning About Science, Engineering and Research) in March 1990, a program designed to help teachers improve science and mathematics education and to provide 'hands on' experiences. It featured the first LASER Mobile Teacher Resource Center (MTRC), is designed to reach educators all over the nation. NASA hopes to operate several MTRCs with funds provided by private industry. The mobile unit is a 22-ton tractor-trailer stocked with NASA educational publications and outfitted with six work stations. Each work station, which can accommodate two teachers at a time, has a computer providing access to NASA Spacelink. Each also has video recorders and photocopy/photographic equipment for the teacher's use. MTRC is only one of the five major elements within LASER. The others are: a Space Technology Course, to promote integration of space science studies with traditional courses; the Volunteer Databank, in which NASA employees are encouraged to volunteer as tutors, instructors, etc; Mobile Discovery Laboratories that will carry simple laboratory equipment and computers to provide hands-on activities for students and demonstrations of classroom activities for teachers; and the Public Library Science Program which will present library based science and math programs.

  2. Fuerza manual de adultos con discapacidad intelectual

    Directory of Open Access Journals (Sweden)

    Ruth Cabeza Ruiz

    2017-09-01

    Full Text Available Objetivo. Presentar una descripción de la fuerza de prensión manual de hombres y mujeres con discapacidad intelectual (DI y comparar los resultados con valores de referencia de otras personas con y sin discapacidad intelectual. Método. El presente trabajo es un estudio transversal observacional, financiado por la Fundación SAMU, en el que se evaluaron a 122 personas con DI (86 hombres y 36 mujeres durante el desarrollo de unas jornadas de carácter recreativo en las que participaron varias asociaciones de atención a este colectivo. La batería de test utilizada fue el Alpaha-Fit Test Battery for Adults. Resultados. Se presentan los resultados relacionados con las variables de fuerza del miembro superior (Hand Grip Strength por grupos de edad (20-24, 25- 29, 30-34, 35-39, 40-44, 45-49, 50-54, 55-59 años. Los datos muestran valores que oscilan desde los 31 kg en los hombres más jóvenes con DI hasta los 13.3 kg del grupo más maduro de mujeres. Estos hallazgos son similares a los valores de referencia de población con DI española. Sin embargo, son muy inferiores a los obtenidos por la población sin discapacidad de la misma edad. Conclusión. Los resultados evidencian el menor rendimiento de las personas con DI en pruebas de fuerza de prensión manual por lo que se hace evidente la necesidad de llevar a cabo programas de ejercicio físico o deporte con las personas con DI.

  3. Laser Research Lab

    Data.gov (United States)

    Federal Laboratory Consortium — The Laser Research lab is thecenter for the development of new laser sources, nonlinear optical materials, frequency conversion processes and laser-based sensors for...

  4. Laser therapy (image)

    Science.gov (United States)

    A laser is used for many medical purposes. Because the laser beam is so small and precise, it enables ... without injuring surrounding tissue. Some uses of the laser are retinal surgery, excision of lesions, and cauterization ...

  5. Laser fusion: an overview

    International Nuclear Information System (INIS)

    Boyer, K.

    1975-01-01

    The laser fusion concept is described along with developments in neodymium and carbon dioxide lasers. Fuel design and fabrication are reviewed. Some spin-offs of the laser fusion program are discussed. (U.S.)

  6. Laser power supply

    International Nuclear Information System (INIS)

    Bernstein, D.

    1975-01-01

    The laser power supply includes a regulator which has a high voltage control loop based on a linear approximation of a laser tube negative resistance characteristic. The regulator has independent control loops for laser current and power supply high voltage

  7. Experiencias de haber crecido con un padre/madre con trastorno mental severo (TMS)

    OpenAIRE

    Vivanco B, Gabriela; Grandón F, Pamela

    2016-01-01

    Introducción. La experiencia de vivir con personas que presentan un Trastorno Mental Severo (TMS) es difícil para las familias, en especial para los hijos quienes han sido poco estudiados. El objetivo de la investigación fue conocer cómo la experiencia de haber vivido con un padre o madre con un trastorno mental severo influyó en la infancia, adolescencia y adultez joven de sus hijos e hijas. Método. Se analizan las experiencias de convivencia con un padre/madre con TMS en 10 hijos (6 hombres...

  8. Bleaching Dengan Teknologi Laser

    OpenAIRE

    Eliwaty

    2008-01-01

    Penulisan tentang bleaching dengan laser dimaksudkan untuk menambah wawasan serta pengetahuan dari pembaca di bidang kedokteran gigi. Macam-macam laser yang dipergunakan dalam bleaching yaitu argon, CO2 serta dioda laser. Contoh merek produk laser yaitu Blulaze, Dentcure untuk argonlaser, Novapulse untuk C02 serta Opus 5 untuk dioda laser. Laser bleaching hasilnya dapat dicapai dalam satu kunjungan saja, cepat, efisien namun biayanya relatif mahal, dapat menimbulkan burn, sensitivitas se...

  9. Laser cladding of aluminium using TiB2

    CSIR Research Space (South Africa)

    Kumar, S

    2010-03-01

    Full Text Available to that of steel (5) and Tita- nium (6; 7). Previous work con- sists of an effort to make deep laser injection of TiB2 on Al or the creation of in-situ of TiB2 using other reactant particles. In-situ creation of TiB2 suffers from other side effects...

  10. Design of optimal laser pulses to control molecular rovibrational ...

    Indian Academy of Sciences (India)

    Optimal control theory in combination with time-dependent quantum dynamics is employed to design laser ... area of quantum computing,22 use of molecular states of various systems ..... frequency) and ωv=0, j=1→v=1, j=0, along with small con- tributions from ... discussed here for three rovibrational excitation pro- cesses.

  11. Laser safety at high profile laser facilities

    International Nuclear Information System (INIS)

    Barat, K.

    2010-01-01

    Complete text of publication follows. Laser safety has been an active concern of laser users since the invention of the laser. Formal standards were developed in the early 1970's and still continue to be developed and refined. The goal of these standards is to give users guidance on the use of laser and consistent safety guidance and requirements for laser manufacturers. Laser safety in the typical research setting (government laboratory or university) is the greatest challenge to the laser user and laser safety officer. This is due to two factors. First, the very nature of research can put the user at risk; consider active manipulation of laser optics and beam paths, and user work with energized systems. Second, a laser safety culture that seems to accept laser injuries as part of the graduate student educational process. The fact is, laser safety at research settings, laboratories and universities still has long way to go. Major laser facilities have taken a more rigid and serious view of laser safety, its controls and procedures. Part of the rationale for this is that these facilities draw users from all around the world presenting the facility with a work force of users coming from a wide mix of laser safety cultures. Another factor is funding sources do not like bad publicity which can come from laser accidents and a poor safety record. The fact is that injuries, equipment damage and lost staff time slow down progress. Hence high profile/large laser projects need to adapt a higher safety regimen both from an engineering and administrative point of view. This presentation will discuss all these points and present examples. Acknowledgement. This work has been supported by the University of California, Director, Office of Science.

  12. Semiconductor Laser Measurements Laboratory

    Data.gov (United States)

    Federal Laboratory Consortium — The Semiconductor Laser Measurements Laboratory is equipped to investigate and characterize the lasing properties of semiconductor diode lasers. Lasing features such...

  13. Laser Protection TIL

    Data.gov (United States)

    Federal Laboratory Consortium — The Laser Protection TIL conducts research and analysis of laser protection materials along with integration schemes. The lab's objectives are to limit energy coming...

  14. Laser Photochemistry.

    Science.gov (United States)

    1981-07-01

    inverted by the first, i.e., at the moment of time t = T, such that i = (2n+)lT, where 0 is the Rabi frequency (Oraevski et al., 1976). . classical... anisotropic molecule present. CW HeNe, Ar+ and Kr+ lasers are used, and the filter method is necessary because of time-scales lo8 - 10ll Hz. Some general...e.g., truncated harmonic oscillator, square well, spherically symmetric Morse or Lennard-Jones, anisotropic (angle-dependent) Morse or Lennard-Jones

  15. El maltrato en las personas con discapacidad

    OpenAIRE

    Revuelta, Lucerga

    2014-01-01

    El maltrato no solo se realiza por acción sino también por omisión, la indiferencia hacia la persona con discapacidad es una forma de maltrato muy frecuente. Por ejemplo, ignorar y desatender las necesidades de la persona con discapacidad o, al contrario, la sobreprotección son maneras de maltrato. Cuando a un niño con discapacidad el padre o cuidador le hace todo, el niño se siente agredido pues le están incapacitando más de lo que su enfermedad ya lo hace.

  16. Hiperalgesia asociada al tratamiento con opioides

    OpenAIRE

    A. Gil Martín; M. Moreno García; J. Sánchez-Rubio Ferrández; T. Molina García

    2014-01-01

    La hiperalgesia inducida por opioides es una reacción paradójica caracterizada por una percepción intensificada de dolor relacionada con el uso de estos medicamentos en ausencia de progresión de la enfermedad o de síndrome de retirada. A diferencia de los casos de tolerancia, definida como pérdida de potencia analgésica durante el uso prolongado de opioides, no se produce mejoría con el escalado de dosis. La hiperalgesia inducida por opioides se ha manifestado en pacientes con dosis de manten...

  17. Tratamiento conservador en pacientes con retinoblastoma bilateral

    Directory of Open Access Journals (Sweden)

    Juan C. Suárez

    2008-11-01

    Full Text Available OBJETIVO: comparar el tratamiento convencional del retinoblastoma bilateral, usado hasta hace algunos años, consistente en radioterapia o enucleación bilateral, con el tratamiento conservador actual que incluye termoterapia transpupilar (TTT o TTT/quimioterapia al menos en un ojo, en niños con diagnóstico de retinoblastoma bilateral. DISEÑO: estudio retrospectivo descriptivo. MUESTRA: 20 pacientes con diagnóstico de retinoblastoma bilateral que consultaron al Hospital Universitario San Vicente de Paúl, de Medellín, Colombia, entre 1997 y 2007. MÉTODO: se hizo enucleación del ojo con el tumor de mayor tamaño. En el otro ojo se hizo tratamiento con TTT, con el láser diodo (810 nm, spot amplio, solo o combinado con otras terapias. RESULTADOS: se dividió a los pacientes en dos grupos: 16 pacientes (32 ojos en el grupo 1 tratados conservadoramente y 4 pacientes (8 ojos en el grupo 2 con tratamiento convencional. El rango de edad fue de 1-72 meses en el grupo 1 y de 1-12 meses en el grupo 2. El tiempo de seguimiento fue de 7-67 meses para el grupo 1 y de 13-73 meses para el grupo 2. En el grupo 1 se hizo enucleación de 16 ojos (50%, radioterapia externa de uno (3,1%, quimioterapia más termoterapia de 5 (15,6% y quimioterapia más termoterapia más crioterapia de 10 (31,3%. En todos los pacientes se logró preservar al menos un ojo. En el grupo 2, se enuclearon 7 ojos (87,5% y se hizo radioterapia externa más enucleación en un paciente (12.5%. Además, todos los pacientes recibieron quimioterapia. CONCLUSIÓN: la terapia conservadora actual consistente en tratamiento local (termoterapia, crioterapia o braquiterapia y quimiorreducción permite preservar al menos un ojo y en algunos casos de los dos, muchas veces con buena agudeza visual, en niños con retinoblastoma bilateral; se evitan así la enucleación bilateral y la radioterapia externa usada en el tratamiento convencional con todos sus efectos secundarios. La enucleación contin

  18. Paciente con tumor de cuerpo carotideo

    Directory of Open Access Journals (Sweden)

    Mariuska Forteza Sáez

    Full Text Available Los tumores de cuerpo carotideo (paragangliomas son neoplasias altamente vascularizadas, muy poco frecuentes y generalmente benignas, originadas en los quimiorreceptores del cuerpo carotideo. Se presenta el caso de un paciente de 54 años, con aumento de volumen cervical derecho, asintomático, con estudio preoperatorio y angiografía realizados por tomografía axial computarizada, que resultan compatibles con tumor de cuerpo carotideo. Se realiza disección subadventicial, informando la biopsia paraganglioma. El tumor fue completamente resecado, sin evidencia de recurrencia y sin complicaciones.

  19. Laser Propulsion - Quo Vadis

    International Nuclear Information System (INIS)

    Bohn, Willy L.

    2008-01-01

    First, an introductory overview of the different types of laser propulsion techniques will be given and illustrated by some historical examples. Second, laser devices available for basic experiments will be reviewed ranging from low power lasers sources to inertial confinement laser facilities. Subsequently, a status of work will show the impasse in which the laser propulsion community is currently engaged. Revisiting the basic relations leads to new avenues in ablative and direct laser propulsion for ground based and space based applications. Hereby, special attention will be devoted to the impact of emerging ultra-short pulse lasers on the coupling coefficient and specific impulse. In particular, laser sources and laser propulsion techniques will be tested in microgravity environment. A novel approach to debris removal will be discussed with respect to the Satellite Laser Ranging (SRL) facilities. Finally, some non technical issues will be raised aimed at the future prospects of laser propulsion in the international community

  20. Presa con revestimiento asfáltico

    Directory of Open Access Journals (Sweden)

    Proudfit, D. P.

    1960-07-01

    Full Text Available La presa denominada Montgomery se halla situada sobre el río South Platte River, a unos 8 km aguas arriba de la ciudad de Alma, del Estado de Colorado (EE. UU., y en la ladera oriental de la cordillera Continental Divide. El cuerpo o dique de esta presa está constituido por piedra, revestida con una capa de hormigón asfáltico en el paramento de contacto con el agua.

  1. Trastornos temporomandibulares en pacientes con maloclusiones

    Directory of Open Access Journals (Sweden)

    Luis Soto Cantero

    Full Text Available Introducción: existe una prevalencia de trastornos oclusales en gran medida relacionados con la presencia de disfunción temporomandibular. Objetivo: determinar el grado de disfunción temporomandibular según el Índice de Maglione en correspondencia con la prevalencia de maloclusiones en el área de salud del policlínico "Turcios Lima". Métodos: se realizó un estudio observacional descriptivo, de corte transversal, en la consulta de ortodoncia, de junio del 2008 a junio del 2009. De un universo constituido por los 280 pacientes que acudieron al servicio de ortodoncia en el período señalado con presencia de maloclusiones, se seleccionó una muestra de 84 pacientes por muestreo aleatorio simple, teniendo en cuenta los criterios de inclusión y exclusión realizados por criterios de expertos. Resultados: presentaban disfunción temporomandibular 74 pacientes y dentro de ellos 44 (52,4 % tenían disfunción grado II (Moderada. El 97 % de los pacientes con relación molar de clase II, presentaban disfunción temporomandibular. El 42,9 % de los pacientes con una maloclusión, presentaban disfunción grado I. El 60 % de los pacientes con dos maloclusiones presentaban disfunción grado II y el 66,7 % de los pacientes con tres maloclusiones, presentaban disfunción grado III. La mayor cantidad de pacientes tuvieron disfunción grado II (Moderada. Conclusiones: el mayor por ciento de los pacientes con disfunciones presentó una clase II molar y a medida que aumentó el número de maloclusiones aumentó también la severidad de la disfunción.

  2. RadCon: A Radiological Consequences Model

    International Nuclear Information System (INIS)

    Crawford, J.; Domel, R.U.

    2000-05-01

    RadCon estimates the dose received by user selected groups in the population from an accidental release of radionuclides to the environment. The exposure pathways considered are external exposure from the cloud and ground and internal exposure from inhalation and ingestion of contaminated food. Atmospheric dispersion modelling is carried out externally to RadCon.Given a two dimensional time varying air and ground concentration of radioactive elements, RadCon allows the user to: view the air and ground concentration over the affected area, select optional parameters and calculate the dose to people,display the results to the user, and change the parameter values. RadCon offers two user interfaces: 1) the standard graphical user interface which is started using Java DoseApp at the command line, or by setting up a shortcut to this command (particularly when RadCon is installed on a PC) and 2) the text based interface used to generate information for the model inter-comparison exercise . This is initiated using Java BIOMASS at the command line, or an equivalent shortcut. The text based interface was developed for research purposes and is not generally available. Appendices A, B and C provide a summary of instructions on setting up RadCon. This will generally be carried out by the computer support personnel

  3. Adolescente femenino con granulomatosis de Wegener fulminante

    Directory of Open Access Journals (Sweden)

    S C Scheffler-Mendoza

    2017-01-01

    Full Text Available Adolescente femenino de 13 años de edad, originaria de Guerrero, grupo étnico mixteco, padres analfabetos y con poco entendimiento del español. Sin otros antecedentes de importancia para el padecimiento. Inició un mes previo con la aparición de una pápula hipercrómica en párpado superior derecho que en los 10 días previos al ingreso aumentó de volumen generando proptosis. Al interrogatorio se negó dolor, lagrimeo, fiebre, o pérdida de peso. Ingresó con fiebre (39.0°C, palidez generalizada, proptosis derecha con exposición de córnea y conjuntiva, eritema periorbitario, movimientos oculares y agudeza visual disminuidos (i.e. contaba dedos a 1 m, pupila con tendencia a midriasis, hiperreactividad a la luz, y fondo de ojo con papila hiperémica edematosa y tortuosidad peripapilar. El resto de exploración no mostró datos relevantes. Se hospitalizó para iniciar tratamiento antimicrobiano parenteral de amplio espectro (i.e. ceftriaxona y vancomicina y abordar proptosis unilateral.

  4. Laser safety and practice

    International Nuclear Information System (INIS)

    Low, K.S.

    1995-01-01

    Lasers are finding increasing routine applications in many areas of science, medicine and industry. Though laser radiation is non-ionizing in nature, the usage of high power lasers requires specific safety procedures. This paper briefly outlines the properties of laser beams and various safety procedures necessary in their handling and usage. (author)

  5. Diode lasers and arrays

    International Nuclear Information System (INIS)

    Streifer, W.

    1988-01-01

    This paper discusses the principles of operation of III-V semiconductor diode lasers, the use of distributed feedback, and high power laser arrays. The semiconductor laser is a robust, miniature, versatile device, which directly converts electricity to light with very high efficiency. Applications to pumping solid-state lasers and to fiber optic and point-to-point communications are reviewed

  6. Laser cladding with powder

    NARCIS (Netherlands)

    Schneider, M.F.; Schneider, Marcel Fredrik

    1998-01-01

    This thesis is directed to laser cladding with powder and a CO2 laser as heat source. The laser beam intensity profile turned out to be an important pa6 Summary rameter in laser cladding. A numerical model was developed that allows the prediction of the surface temperature distribution that is

  7. Semiconductor laser shearing interferometer

    International Nuclear Information System (INIS)

    Ming Hai; Li Ming; Chen Nong; Xie Jiaping

    1988-03-01

    The application of semiconductor laser on grating shearing interferometry is studied experimentally in the present paper. The method measuring the coherence of semiconductor laser beam by ion etching double frequency grating is proposed. The experimental result of lens aberration with semiconductor laser shearing interferometer is given. Talbot shearing interferometry of semiconductor laser is also described. (author). 2 refs, 9 figs

  8. Visible Solid State Lasers

    NARCIS (Netherlands)

    Hikmet, R.A.M.

    2007-01-01

    Diode lasers can be found in various applications most notably in optical communication and optical storage. Visible lasers were until recently were all based on IR diode lasers. Using GaN, directly blue and violet emitting lasers have also been introduced to the market mainly in the area of optical

  9. Laser Microdissection.

    Science.gov (United States)

    Frost, Andra R; Eltoum, Isam-Eldin; Siegal, Gene P; Emmert-Buck, Michael R; Tangrea, Michael A

    2015-10-01

    Laser microdissection (LM) offers a relatively rapid and precise method of isolating and removing specified cells from complex tissues for subsequent analysis of their RNA, DNA, protein or metabolite content, thereby allowing assessment of the role of different cell types in the normal physiological or disease processes being studied. In this unit, protocols for the preparation of mammalian frozen tissues, fixed tissues, and cytologic specimens for LM, including tissue freezing, tissue processing and paraffin embedding, histologic sectioning, cell processing, hematoxylin and eosin staining, immunohistochemistry, and image-guided cell targeting are presented. Also provided are recipes for generating lysis buffers for the recovery of nucleic acids and proteins. The Commentary section addresses the types of specimens that can be utilized for LM and approaches to staining of specimens for cell visualization. Emphasis is placed on the preparation of tissue or cytologic specimens as this is critical to effective LM. Copyright © 2015 John Wiley & Sons, Inc.

  10. Laser EXAFS

    International Nuclear Information System (INIS)

    Mallozzi, P.J.; Epstein, H.M.; Schwenzel, R.E.; Campbell, B.E.

    1983-01-01

    Apparatus for obtaining EXAFS data of a material, comprising means for directing radiant energy from a laser onto a target in such manner as to produce X-rays at the target of a selected spectrum and intensity, suitable for obtaining the EXAFS spectrum of the material, means for directing X-rays from the target onto spectral dispersive means so located as to direct the spectrally resolved X-rays therefrom onto recording means, and means for positioning a sample of material in the optical path of the X-rays, the recording means providing a reference spectrum of X-rays not affected by the sample and absorption spectrum of X-rays modified by transmission through the sample

  11. Multibeam Fibre Laser Cutting

    DEFF Research Database (Denmark)

    Olsen, Flemming Ove

    The appearance of the high power high brilliance fibre laser has opened for new possibilities in laser materials processing. In laser cutting this laser has demonstrated high cutting performance compared to the dominating cutting laser, the CO2-laser. However, quality problems in fibre......-laser cutting have until now limited its application in metal cutting. In this paper the first results of proof-of-principle studies applying a new approach (patent pending) for laser cutting with high brightness short wavelength lasers will be presented. In the approach, multi beam patterns are applied...... to control the melt flow out of the cut kerf resulting in improved cut quality in metal cutting. The beam patterns in this study are created by splitting up beams from 2 single mode fibre lasers and combining these beams into a pattern in the cut kerf. The results are obtained with a total of 550 W of single...

  12. Multibeam fiber laser cutting

    DEFF Research Database (Denmark)

    Olsen, Flemming Ove; Hansen, Klaus Schütt; Nielsen, Jakob Skov

    2009-01-01

    The appearance of the high power high brilliance fiber laser has opened for new possibilities in laser materials processing. In laser cutting this laser has demonstrated high cutting performance compared to the dominating Cutting laser, the CO2 laser. However, quality problems in fiber......-laser cutting have until now limited its application to metal cutting. In this paper the first results of proof-of-principle Studies applying a new approach (patent pending) for laser cutting with high brightness and short wavelength lasers will be presented. In the approach, multibeam patterns are applied...... to control the melt flow out of the cut kerf resulting in improved cut quality in metal cutting. The beam patterns in this study are created by splitting up beams from two single mode fiber lasers and combining these beams into a pattern in the cut kerf. The results are obtained with a total of 550 W...

  13. History and principle of lasers

    International Nuclear Information System (INIS)

    Townes, Ch.H.; Schwob, C.; Julien, J.; Forget, S.; Robert-Philip, I.; Balcou, Ph.

    2010-01-01

    In the first article C.H. Townes, the inventor of the maser, describes the work and ideas that led to the invention of the laser. The second article explains how a laser operate and the third article reviews the main different types of laser: solid lasers, gas lasers, diode lasers and dye lasers

  14. RadConEd: A Graphical Data Editor for the Radiological Consequences Model, RadCon

    International Nuclear Information System (INIS)

    Crawford, J.; Domel, R.U.

    2000-05-01

    This document describes the application, RadConEd, which has been designed and implemented to enable users of the RadCon system to update these parameter files. The RadCon system is written in the Java programming language, and as such provides portability across computer platforms. The software described in this report was developed in line with the portability requirements of RadCon, thus providing a uniform user interface across computer platforms and bypassing the need of using system editors. In addition a number of data integrity measures were implemented

  15. Technological laser application

    International Nuclear Information System (INIS)

    Shia, D.O.; Kollen, R.; Rods, U.

    1980-01-01

    Problems of the technological applications of lasers are stated in the popular form. Main requirements to a technological laser as well as problems arising in designing any system using lasers have been considered. Areas of the laser applications are described generally: laser treatment of materials, thermal treatment, welding, broach and drilling of holes, scribing, microtreatment and adjustment of resistors, material cutting, investigations into controlled thermonuclear fussion

  16. Laser ablation principles and applications

    CERN Document Server

    1994-01-01

    Laser Ablation provides a broad picture of the current understanding of laser ablation and its many applications, from the views of key contributors to the field. Discussed are in detail the electronic processes in laser ablation of semiconductors and insulators, the post-ionization of laser-desorbed biomolecules, Fourier-transform mass spectroscopy, the interaction of laser radiation with organic polymers, laser ablation and optical surface damage, laser desorption/ablation with laser detection, and laser ablation of superconducting thin films.

  17. Enfermedad coronaria en pacientes con psoriasis

    Directory of Open Access Journals (Sweden)

    Walter Masson

    2013-10-01

    Full Text Available Comunicaciones previas asociaron la psoriasis con la enfermedad coronaria. Desconocemos si en nuestro país o región existe dicha asociación. Se realizó un estudio transversal analizando los datos de la historia clínica electrónica de un sistema de salud de Buenos Aires. Analizamos todos los pacientes mayores de 18 años con diagnóstico de psoriasis entre el 1 de enero de 2003 y el 31 de julio de 2011 y los comparamos con un grupo control, en una relación 2:1, obtenido en forma aleatoria del mismo sistema de salud, apareados por edad y sexo. Determinamos la prevalencia de los factores de riesgo cardiovascular y de enfermedad coronaria. Analizamos la asociación entre la enfermedad coronaria y la psoriasis mediante análisis uni y multivariado. Se incluyeron 3 833 sujetos (1 286 pacientes con psoriasis y 2 547 controles. La prevalencia de hipertensión arterial (50% vs. 38%, p < 0.001, tabaquismo (25% vs. 17%, p < 0.001, diabetes (12% vs. 8%, p < 0.001 y enfermedad coronaria (4.98% vs. 3.06%, p = 0.003 fue mayor en los sujetos con psoriasis en comparación con el grupo control. Independientemente de la edad, la presencia de diabetes, hipertensión arterial o tabaquismo, hubo una asociación significativa entre la enfermedad coronaria y la psoriasis (OR 1.48, IC95% 1.04-2.11, p = 0.03. En conclusión, en esta población de Buenos Aires, los pacientes con psoriasis tuvieron una mayor prevalencia de diabetes, hipertensión arterial, tabaquismo y enfermedad coronaria. La asociación entre la psoriasis y la enfermedad coronaria fue independiente de los factores de riesgo explorados.

  18. Mincle Signaling Promotes Con-A Hepatitis

    Science.gov (United States)

    Greco, Stephanie H.; Torres-Hernandez, Alejandro; Kalabin, Aleksandr; Whiteman, Clint; Rokosh, Rae; Ravirala, Sushma; Ochi, Atsuo; Gutierrez, Johana; Salyana, Muhammad Atif; Mani, Vishnu R.; Nagaraj, Savitha V.; Deutsch, Michael; Seifert, Lena; Daley, Donnele; Barilla, Rocky; Hundeyin, Mautin; Nikifrov, Yuriy; Tejada, Karla; Gelb, Bruce E.; Katz, Steven C.; Miller, George

    2016-01-01

    Concanavalin-A (Con-A) hepatitis is regarded as a T cell-mediated model of acute liver injury. Mincle is a C-type lectin receptor (CLR) that is critical in the immune response to mycobacteria and fungi, but does not have a well-defined role in pre-clinical models of non-pathogen mediated inflammation. Since Mincle can ligate the cell death ligand SAP130, we postulated that Mincle signaling drives intrahepatic inflammation and liver injury in Con-A hepatitis. Acute liver injury was assessed in the murine Con-A hepatitis model using C57BL/6, Mincle−/−, and Dectin-1−/− mice. The role of C/EBPβ and HIF-1α signaling was assessed using selective inhibitors. We found that Mincle was highly expressed in hepatic innate inflammatory cells and endothelial cells in both mice and humans. Furthermore, sterile Mincle ligands and Mincle signaling intermediates were increased in the murine liver in Con-A hepatitis. Most significantly, Mincle deletion or blockade protected against Con-A hepatitis whereas Mincle ligation exacerbated disease. Bone marrow chimeric and adoptive transfer experiments suggested that Mincle signaling in infiltrating myeloid cells dictates disease phenotype. Conversely, signaling via other CLRs did not alter disease course. Mechanistically, we found that Mincle blockade decreased the NF-κβ related signaling intermediates, C/EBPβ and HIF-1α, both of which are necessary in macrophage-mediated inflammatory responses. Accordingly, Mincle deletion lowered production of nitrites in Con-A hepatitis and inhibition of both C/EBPβ and HIF1-α reduced the severity of liver disease. Our work implicates a novel innate immune driver of Con-A hepatitis and, more broadly, suggests a potential role for Mincle in diseases governed by sterile inflammation. PMID:27559045

  19. Mincle Signaling Promotes Con A Hepatitis.

    Science.gov (United States)

    Greco, Stephanie H; Torres-Hernandez, Alejandro; Kalabin, Aleksandr; Whiteman, Clint; Rokosh, Rae; Ravirala, Sushma; Ochi, Atsuo; Gutierrez, Johana; Salyana, Muhammad Atif; Mani, Vishnu R; Nagaraj, Savitha V; Deutsch, Michael; Seifert, Lena; Daley, Donnele; Barilla, Rocky; Hundeyin, Mautin; Nikifrov, Yuriy; Tejada, Karla; Gelb, Bruce E; Katz, Steven C; Miller, George

    2016-10-01

    Con A hepatitis is regarded as a T cell-mediated model of acute liver injury. Mincle is a C-type lectin receptor that is critical in the immune response to mycobacteria and fungi but does not have a well-defined role in preclinical models of non-pathogen-mediated inflammation. Because Mincle can ligate the cell death ligand SAP130, we postulated that Mincle signaling drives intrahepatic inflammation and liver injury in Con A hepatitis. Acute liver injury was assessed in the murine Con A hepatitis model using C57BL/6, Mincle(-/-), and Dectin-1(-/-) mice. The role of C/EBPβ and hypoxia-inducible factor-1α (HIF-1α) signaling was assessed using selective inhibitors. We found that Mincle was highly expressed in hepatic innate inflammatory cells and endothelial cells in both mice and humans. Furthermore, sterile Mincle ligands and Mincle signaling intermediates were increased in the murine liver in Con A hepatitis. Most significantly, Mincle deletion or blockade protected against Con A hepatitis, whereas Mincle ligation exacerbated disease. Bone marrow chimeric and adoptive transfer experiments suggested that Mincle signaling in infiltrating myeloid cells dictates disease phenotype. Conversely, signaling via other C-type lectin receptors did not alter disease course. Mechanistically, we found that Mincle blockade decreased the NF-κβ-related signaling intermediates C/EBPβ and HIF-1α, both of which are necessary in macrophage-mediated inflammatory responses. Accordingly, Mincle deletion lowered production of nitrites in Con A hepatitis and inhibition of both C/EBPβ and HIF-1α reduced the severity of liver disease. Our work implicates a novel innate immune driver of Con A hepatitis and, more broadly, suggests a potential role for Mincle in diseases governed by sterile inflammation. Copyright © 2016 by The American Association of Immunologists, Inc.

  20. New power lasers

    International Nuclear Information System (INIS)

    Yamanaka, Masanobu; Daido, Hiroyuki; Imasaki, Kazuo.

    1989-01-01

    As the new power lasers which are expected to exert large extending effect to the fields of advanced science and technology including precision engineering as well as laser nuclear fusion, LD-excited solid laser, X-ray laser and free electron laser are taken up and outlined. Recently, the solid laser using high power output, high efficiency semiconductor laser as the exciting beam source has been developed. This is called laser diode (LD)-excited solid laser, and the heightening of power output and efficiency and the extension of life are planned. Its present status and application to medical use, laser machining, laser soldering and so on are described. In 1960, the laser in visible region appeared, however in 1985, the result of observing induced emission beam by electron collision exciting method was reported in USA. In the wavelength range of 200 A, holography and contact X-ray microscope applications were verified. The various types of soft X-ray laser and the perspective hereafter are shown. The principle of free electron laser is explained. In the free electron laser, wavelength can be changed by varying electron beam energy, the period of wiggler magnetic field and the intensity of magnetic field. Further, high efficiency and large power output are possible. Its present status, application and the perspective hereafter are reported. (K.I.)

  1. Laser applications in materials processing

    International Nuclear Information System (INIS)

    Ready, J.F.

    1980-01-01

    The seminar focused on laser annealing of semiconductors, laser processing of semiconductor devices and formation of coatings and powders, surface modification with lasers, and specialized laser processing methods. Papers were presented on the theoretical analysis of thermal and mass transport during laser annealing, applications of scanning continuous-wave and pulsed lasers in silicon technology, laser techniques in photovoltaic applications, and the synthesis of ceramic powders from laser-heated gas-phase reactants. Other papers included: reflectance changes of metals during laser irradiation, surface-alloying using high-power continuous lasers, laser growth of silicon ribbon, and commercial laser-shock processes

  2. Variables socionutricionales de hogares mazahuas integrados por preescolares desnutridos con madres con obesidad y sin obesidad

    Directory of Open Access Journals (Sweden)

    Conzuelo González, Viridiana Vanessa

    2009-01-01

    Full Text Available El primer objetivo fue conocer cuántos menores de cinco años con diferentes grados de desnutrición tienen una madre con sobrepeso/obesidad/ en una comunidad indígena que vive en extrema pobreza y bajo condiciones de migración masculina internacional. El segundo fue comparar tres variables socionutricionales (ingreso familiar, educación de la madre y adecuación nutrimental de la dieta diaria entre estos hogares y los hogares con desnutrición infantil y madres sin obesidad. Se realizó un estudio transversal (2006-2007, en la comunidad mazahua de San Francisco Tepeolulco, Municipio de Temascalcingo; que incluyó a 85 hogares integrados por preescolares con desnutrición inscritos al programa Oportunidades. Se determinó el estado nutrición de los preescolares con indicadores antropométricos y se obtuvo el IMC de las madres de estos infantes. Se aplicó una encuesta socionutricional, incluida el recordatorio de 24 horas, y complementado con la observación participante (cualitativa. Se encontró que 83% de las madres mazahuas presentaron sobrepeso u obesidad. El estado de nutrición de los preescolares con madres con obesidad presentó un porcentaje mayor de desnutrición (76%. En la variable género, se encontró que 54% de los niños con madres con obesidad tenía baja talla. Al relacionar el nivel educativo de la madre, esta variable resultó ser estadísticamente significativa (p=0.015, donde el analfabetismo está más relacionado con la desnutrición infantil que tienen madres de bajo y/o peso normal. La elevada prevalencia de hogares conformados con preescolares con desnutrición y madres con obesidad, es un síntoma más de la pobreza en zonas indígenas en México, con bajo índice de desarrollo humano.

  3. Epilepsia de la infancia con paroxismos occipitales

    Directory of Open Access Journals (Sweden)

    Albia Pozo Alonso

    1999-09-01

    Full Text Available Se reporta que la epilepsia de la infancia con paroxismos occipitales constituye un síndrome epiléptico muy bien definido; se incluye en el grupo de las epilepsias idiopáticas relacionadas con localización. Los ataques comienzan habitualmente con síntomas visuales, en ocasiones seguidos por ataques hemiclónicos, parciales complejos y tónicoclónicos generalizados. El electroencefalograma interictal muestra complejos de puntaonda de localización occipital y temporal posterior que desaparecen con la apertura de los ojos. Se presenta una paciente de 8 años de edad que reúne los criterios clínicos y electroencefalográficos de la epilepsia de la infancia con paroxismos occipitales y se enfatiza en la evolución supuestamente benigna de dicho síndrome.Is is reported that epilepsy of childhood with occipital paroxysms is an epileptic syndrome that is well defined. It is included in the group of related idiopathic epilepsies with localization. Seizures habitually begin with visual symptoms, which are ocassionally followed by hemiclonic, complex partial, and generalized tonicclonic seizures. The interictal EEG shows spike-wave complexes of occipital and temporal posterior localization that are suppressed by eye opening. A patient aged 8 in whom the clinical and electroencephalographic criteria of epilepsy of childhood with occipital paroxysms are present is studied in this paper. Emphasis is made on the apparently benign evolution of this syndrome.

  4. Raman fiber lasers

    CERN Document Server

    2017-01-01

    This book serves as a comprehensive, up-to-date reference about this cutting-edge laser technology and its many new and interesting developments. Various aspects and trends of Raman fiber lasers are described in detail by experts in their fields. Raman fiber lasers have progressed quickly in the past decade, and have emerged as a versatile laser technology for generating high power light sources covering a spectral range from visible to mid-infrared. The technology is already being applied in the fields of telecommunication, astronomy, cold atom physics, laser spectroscopy, environmental sensing, and laser medicine. This book covers various topics relating to Raman fiber laser research, including power scaling, cladding and diode pumping, cascade Raman shifting, single frequency operation and power amplification, mid-infrared laser generation, specialty optical fibers, and random distributed feedback Raman fiber lasers. The book will appeal to scientists, students, and technicians seeking to understand the re...

  5. Ceramic Laser Materials

    Directory of Open Access Journals (Sweden)

    Guillermo Villalobos

    2012-02-01

    Full Text Available Ceramic laser materials have come a long way since the first demonstration of lasing in 1964. Improvements in powder synthesis and ceramic sintering as well as novel ideas have led to notable achievements. These include the first Nd:yttrium aluminum garnet (YAG ceramic laser in 1995, breaking the 1 KW mark in 2002 and then the remarkable demonstration of more than 100 KW output power from a YAG ceramic laser system in 2009. Additional developments have included highly doped microchip lasers, ultrashort pulse lasers, novel materials such as sesquioxides, fluoride ceramic lasers, selenide ceramic lasers in the 2 to 3 μm region, composite ceramic lasers for better thermal management, and single crystal lasers derived from polycrystalline ceramics. This paper highlights some of these notable achievements.

  6. Infrared laser system

    International Nuclear Information System (INIS)

    Cantrell, C.D.; Carbone, R.J.

    1977-01-01

    An infrared laser system and method for isotope separation may comprise a molecular gas laser oscillator to produce a laser beam at a first wavelength, Raman spin flip means for shifting the laser to a second wavelength, a molecular gas laser amplifier to amplify said second wavelength laser beam to high power, and optical means for directing the second wavelength, high power laser beam against a desired isotope for selective excitation thereof in a mixture with other isotopes. The optical means may include a medium which shifts the second wavelength high power laser beam to a third wavelength, high power laser beam at a wavelength coincidental with a corresponding vibrational state of said isotope and which is different from vibrational states of other isotopes in the gas mixture

  7. Ceramic Laser Materials

    Science.gov (United States)

    Sanghera, Jasbinder; Kim, Woohong; Villalobos, Guillermo; Shaw, Brandon; Baker, Colin; Frantz, Jesse; Sadowski, Bryan; Aggarwal, Ishwar

    2012-01-01

    Ceramic laser materials have come a long way since the first demonstration of lasing in 1964. Improvements in powder synthesis and ceramic sintering as well as novel ideas have led to notable achievements. These include the first Nd:yttrium aluminum garnet (YAG) ceramic laser in 1995, breaking the 1 KW mark in 2002 and then the remarkable demonstration of more than 100 KW output power from a YAG ceramic laser system in 2009. Additional developments have included highly doped microchip lasers, ultrashort pulse lasers, novel materials such as sesquioxides, fluoride ceramic lasers, selenide ceramic lasers in the 2 to 3 μm region, composite ceramic lasers for better thermal management, and single crystal lasers derived from polycrystalline ceramics. This paper highlights some of these notable achievements. PMID:28817044

  8. Spectroscopic and imaging diagnostics of pulsed laser deposition laser plasmas

    International Nuclear Information System (INIS)

    Thareja, Raj K.

    2002-01-01

    An overview of laser spectroscopic techniques used in the diagnostics of laser ablated plumes used for thin film deposition is given. An emerging laser spectroscopic imaging technique for the laser ablation material processing is discussed. (author)

  9. Aspectos Psicosociales Relacionados con el TEPT en Pacientes con Cáncer de Mama

    OpenAIRE

    Hernández Moreno, Fresia Paloma; Landero Hernández, René

    2015-01-01

    El objetivo del estudio fue analizar la relación del estrés, la depresión y las estrategias de afrontamiento con el Trastorno de Estrés Postraumático (TEPT) en una muestra de pacientes con cáncer de mama. Se realizó con una muestra no probabilística de 52 mujeres con cáncer de mama. Se encontró una relación entre TEPT y estrés (r= .344, p= .014), TEPT y depresión (rs=.346, p= .013). El TEPT correlacionó con evitación cognitiva (r= .437, p= .001), TEPT y desesperanza (rs= .437, p= .001) y TEPT...

  10. Desarrollo de aleaciones multifuncionales con base titanio

    OpenAIRE

    Pareja, Ramiro

    2007-01-01

    El Laboratorio de Materiales Nano-estructurados y Multifuncionales del Departamento de Física de la Universidad Carlos III de Madrid se dedica al desarrollo, procesado y caracterización de aleaciones con propiedades mejores que las preparadas por métodos convencionales. La mejora de las propiedades se consigue produciendo las aleaciones con un tamaño de grano nanométrico o ultrafino, o introduciendo una dispersión de nano-partículas de óxido en la matriz. El grupo está interesado en algún tip...

  11. TIROTOXICOSIS GESTACIONAL: PATOLOGIA CON RIESGO VITAL

    OpenAIRE

    Valdés R.,Enrique; Pilasi M.,Carlos; Núñez U.,Tatiana

    2003-01-01

    Se presenta un caso clínico con diagnóstico final de Tirotoxicosis gestacional que debuta con una complicación excepcional, insuficiencia cardíaca congestiva e hipertensión pulmonar severa. Se presenta la experiencia del Hospital Clínico de la Universidad de Chile, proponiendo que su diagnóstico y tratamiento oportunos son la base del pronóstico de esta patología de riesgo vital para el binomio madre-hijo

  12. Amplificadores con transistores. Estudio y dimensionado

    OpenAIRE

    Lubiano García, Adrián

    2017-01-01

    Este trabajo es un estudio de las distintas configuraciones de los amplificadores con transistores vistos en la asignatura de Electrónica Analógica del tercer curso del Grado en Ingeniería en Electrónica Industrial y Automática de la Escuela de Ingenierías Industriales de la Universidad de Valladolid. En este trabajo se mostrarán los pasos seguidos en la creación de una aplicación con Visual Basic para la realización de los ejercicios de las distintas configuraciones, así...

  13. Galaxias australes con núcleo doble

    Science.gov (United States)

    Gimeno, G.; Díaz, R.; Carranza, G.

    Se estudia una muestra de galaxias australes con núcleo doble a partir de una búsqueda extensiva en la literatura. Se analizan las características morfológicas, fotométricas y espectroscópicas de la muestra. Para algunas galaxias se han realizado observaciones con el espectrógrafo multifunción (EMF) de la Estación Astrofísica de Bosque Alegre a partir de las cuales se determinaron parámetros cinemáticos.

  14. Lasers in periodontics.

    Science.gov (United States)

    Elavarasu, Sugumari; Naveen, Devisree; Thangavelu, Arthiie

    2012-08-01

    Laser is one of the most captivating technologies in dental practice since Theodore Maiman in 1960 invented the ruby laser. Lasers in dentistry have revolutionized several areas of treatment in the last three and a half decades of the 20(th) century. Introduced as an alternative to mechanical cutting device, laser has now become an instrument of choice in many dental applications. Evidence suggests its use in initial periodontal therapy, surgery, and more recently, its utility in salvaging implant opens up a wide range of applications. More research with better designs are a necessity before lasers can become a part of dental armamentarium. This paper gives an insight to laser in periodontics.

  15. Excimer laser applications

    International Nuclear Information System (INIS)

    Fantoni, R.

    1988-01-01

    This lecture deals with laser induced material photoprocessing, especially concerning those processes which are initiated by u.v. lasers (mostly excimer laser). Advantages of using the u.v. radiation emitted by excimer lasers, both in photophysical and photochemical processes of different materials, are discussed in detail. Applications concerning microelectronics are stressed with respect to other applications in different fields (organic chemistry, medicine). As further applications of excimer lasers, main spectroscopic techniques for ''on line'' diagnostics which employ excimer pumped dye lasers, emitting tunable radiation in the visible and near u.v. are reviewed

  16. Lasers in chemical processing

    International Nuclear Information System (INIS)

    Davis, J.I.

    1982-01-01

    The high cost of laser energy is the crucial issue in any potential laser-processing application. It is expensive relative to other forms of energy and to most bulk chemicals. We show those factors that have previously frustrated attempts to find commercially viable laser-induced processes for the production of materials. Having identified the general criteria to be satisfied by an economically successful laser process and shown how these imply the laser-system requirements, we present a status report on the uranium laser isotope separation (LIS) program at the Lawrence Livermore National Laboratory

  17. Laser in urology. Laser i urologien

    Energy Technology Data Exchange (ETDEWEB)

    Breisland, H.O. (Aker Sykehus, Oslo (Norway))

    1991-09-01

    The neodymium YAG laser is particularly suited for endoscopic urologic surgery because the YAG laser light can be conducted in flexible fibers. Superficial bladder tumours can be treated under local anaesthesia in the outpatient department. The frequency of local recurrences is low, significantly lower than after electrosection or electrocoagulation. Selected cases of T2-muscle invasive bladder tumours can be cured with laser coagulation applied subsequently to transurethral resection. Combined treatment with electrosection and laser coagulation of localized prostatic cancer is a promising method which compares favourably with results obtained by other treatment modalities. Tumours in the upper urinary tract can be laser-treated through ureteroscopes or nephroscopes, but the treatment should be limited to low stage, low grade tumours. Laser is the treatment of choice for intraurethral condylomatas. Laser treatment of penil carcinoma gives excellent cosmetic and functional results and few local recurrences. Laser lithotripsy is a new technique for treatment of ureteric stones and photodynamic laser therapy is a promising tecnique for treatment of carcinoma in situ in the bladder empithelium. However, neither of these techniques are available for clinical use in Norway as yet. 17 refs., 3 figs., 1 tabs.

  18. Laser materials processing with diode lasers

    OpenAIRE

    Li, Lin; Lawrence, Jonathan; Spencer, Julian T.

    1996-01-01

    Laser materials processing is currently dominated by CO2, Nd-YAG and Excimer lasers. Continuous advances in semiconductor laser technology over the last decade have increased the average power output of the devices annualy by two fold, resulting in the commercial availability of the diode lasers today with delivery output powers in excess of 60W in CW mode and 5kW in qasi-CW mode. The advantages of compactness, high reliability, high efficiency and potential low cost, due to the mass producti...

  19. 1982 laser program annual report

    International Nuclear Information System (INIS)

    Hendricks, C.D.; Grow, G.R.

    1983-08-01

    This annual report covers the following eight sections: (1) laser program review, (2) laser systems and operation, (3) target design, (4) target fabrication, (5) fusion experiments program, (6) Zeus laser project, (7) laser research and development, and (8) energy applications

  20. IoT con Raspberry Pi

    OpenAIRE

    García Muelas, Carlos

    2015-01-01

    Estudio de diferentes plataformas software y hardware del internet de las cosas. Aplicación real con Raspberry Pi. Estudi de diferents plataformes programari i maquinari de l'internet de les coses. Aplicació real amb Raspberry Pi. Bachelor thesis for the Telecommunication Technologies program on Telematics.

  1. en personas con el VIH/SIDA

    Directory of Open Access Journals (Sweden)

    Ximena Palacios Espinosa

    2006-01-01

    Full Text Available El objetivo de este estudio fue hallar la relación de la intención e ideación suicida con algunas variables sociodemográficas, las características de la enfermedad, el tratamiento antirretroviral y los aspectos piscoafectivos en personas con el VIH/SIDA que residen en Bogotá (Colombia y pertenecientes a una fundación. Para ello, se tomó una muestra de 75 pacientes con VIH positivo a quienes se evaluó a través de una entrevista semiestructurada y dos instrumentos: el inventario de depresión de Beck (IBD y la escala de Ideación Suicida (SSI. Los resultados mostraron que solo 29 personas tenían ideación suicida y 10 intención suicida: De los 10 solo 2 sujetos tenían intención después del diagnóstico. Se encontró una relación estadística significativa para ideación suicida e intención suicida con edad, estrato socioeconómico, estado civil, orientación sexual, las características de la enfermedad, el tratamiento antirretroviral y los aspectos piscoafectivos.

  2. La relazione empatica con i robot

    NARCIS (Netherlands)

    Marti, P.; Iacono, I.; Tittarelli, M.

    2013-01-01

    È possibile instaurare una relazione empatica tra un essere umano e un robot? Il presente studio valuta le soluzioni di design adottate nella progettazione di una maschera empatica, implementata su un tablet, che consente all’anziano di dialogare nell’ambiente domestico con un robot che lo assiste

  3. Sarcoma de Kaposi en paciente con SIDA

    Directory of Open Access Journals (Sweden)

    Jesús Ramón León Polanco

    2015-01-01

    Full Text Available Se presenta el caso de un paciente masculino de 33 años de edad, con antecedentes de VIH-SIDA desde hace 10 años, que se mantiene en tratamiento con antirretrovirales. Durante todo este tiempo ha presentado varios episodios de infecciones respiratorias, incluyendo tuberculosis pulmonar 5 años atrás. Acude a consulta refiriendo edemas en miembros inferiores acompañado de lesiones en piel de color violáceo de un año de evolución, previamente interpretado como linfangitis rebelde al tratamiento y que se extendió a la cara interna de los muslos y a los miembros inferiores. Con pérdida de peso, no prurito en las lesiones, fiebre, lesiones en la mucosa oral. Se determinó hemoglobina 89 g/L, leucocitos 4,5 x 109 /L, se estudiaron las funciones hepática y renales resultando normales. Radiografías de tórax y ultrasonido abdominal normales. Se realizó estudio anatomopatológico de piel que informó Sarcoma de Kaposi. Se impuso tratamiento con quimioterapia

  4. Las construcciones con esqueleto en madera

    Directory of Open Access Journals (Sweden)

    Heinz Leser S.

    1984-06-01

    Estos sistemas se emplean preferentemente en viviendas prefabricadas y edificios de pequeña envergadura. Finalmente, consideramos las construcciones con "esqueleto en madera", cuyo campo de aplicación principal está en las edificaciones de mediana extensión: escuelas, centros comunitarios, pequeñas industrias o bloques habitacionales.

  5. Conversazioni autobiografiche con Albino Sacco-Casamassima

    Directory of Open Access Journals (Sweden)

    Orazio Maria Valastro

    2004-03-01

    Full Text Available Nel 1948 venne Olivetti a Matera. Olivetti venne a Matera con un certo ambasciatore americano che praticamente aveva preparato o stava dando una mano per il piano Marschall, venne a Matera e mi vollero incontrare. Io sono stato chiamato dalla piazza, stavo nella piazza, era il mese di luglio, una cosa di questo genere, e andai in un bar, un bar ad angolo mi ricordo in Via Don Minzioni, dove questo Olivetti mi disse 'ma lei che cosa fa coi sassi?' 'Che cos'è questa storia?' Gli raccontai un po' che cosa facevo io con questi amici, avevamo fatto questo, insomma tutto quello che avevamo fatto nei sassi e che volevamo preparare ancora per presentare a qualcuno un piano di revisionamento dei sassi. Mi ricordo, era la prima volta che avevo visto Adriano Olivetti, ne avevo sentito parlare però non avevo mai visto quest'uomo con gli occhi celesti, minuto, coi capelli bianchi, riccioluto, con una cravatta bianca, cosa che mi fece impressione, una specie di angelo.

  6. Procesamiento de argumentos en personas con afasia

    Directory of Open Access Journals (Sweden)

    Luis Martínez

    2012-06-01

    Full Text Available En las personas con afasia se alteran diversos procesos lingüísticos. Entre las alteraciones más comunes tenemos aquellas que se producen en el procesamiento sintáctico, lo cual es evidente en el procesamiento de los argumentos. Investigaciones previas realizadas a sujetos con afasia reflejan un procesamientodeficiente de argumentos, lo cual se hace más evidente a medida que el número de argumentos aumenta. Se ha encontrado que mientras mayor es la complejidad en la estructura de la oración, los sujetos afásicos manifiestan mayores dificultades en el procesamiento de la misma. El presente estudio indaga en las dificultades que presentan los sujetos adultos con trastornos afásicos hablantes de español en el procesamiento de argumentos durante tareas de descripción. Este trabajo corrobora la evidencia de que los sujetos con afasia manifiestan un manejo deficiente en el procesamiento de argumentos en las tareas señaladas.

  7. Coriocarcinoma con metástasis pulmonar

    Directory of Open Access Journals (Sweden)

    Vicia Sánchez Abalos

    2014-05-01

    Full Text Available Se presenta el caso clínico de una fémina de 44 años de edad, con 32 semanas de embarazo, la cual fuera ingresada en la Unidad de Cuidados Intensivos del Hospital General Docente "Dr. Juan Bruno Zayas Alfonso" de Santiago de Cuba, por presentar insuficiencia respiratoria aguda como consecuencia de una sepsis. La paciente fue tratada con cefalosporina de tercera generación y ventilación mecánica no invasiva, pero se mantuvieron las características gasométricas de hipoxemia y una mala reacción terapéutica, por lo que se requirió instrumentación de las vías respiratorias y soporte hemodinámico, sin lograr regresión del cuadro clínico, lo cual condujo a un paro cardiorrespiratorio y, con ello, a la muerte. La necropsia mostró un coriocarcinoma del endometrio con metástasis pulmonar

  8. Con la testa fra le nuvole

    Directory of Open Access Journals (Sweden)

    André Greboge

    2015-06-01

    Full Text Available Partitura de Con la testa fra le nuvole, composta em 2015 para piano e harpa de pedais. Este memorial apresenta as notas sobre a obra e a organização do processo composicional, baseada em um insight composicional a partir da ideia de complexidade apresentada por James Tenney em Meta Meta-hodos (1988.

  9. REDUCCIÓN DE ÓXIDOSDE NITROGENO CON CATALIZADORES ZEOLÍTICOS INTERCAMBIADOS CON COBALTO

    Directory of Open Access Journals (Sweden)

    Enrique Alexis García Moya

    2012-10-01

    Full Text Available Se presenta un estudio sobre la reducción catalítica selectiva (RCS de NOx con metano en presencia de oxígeno en exceso con varios catalizadores a base de las zeolitas mordenita, ferrierita y ZSM-5 intercambiadas con diferentes cargas de cobalto y con las correspondientes zeolitas en forma acida. Cuando la mezcla reactiva contenía mayormente NO2 en lugar de NO, los catalizadores ácidos mostraron las más altas velocidades de formación de N2 en condiciones secas. Las mayores actividades se obtuvieron con los catalizadores Co-mordenita, siguiendo en orden de actividad los catalizadores Co-Ferrierita y Co-ZSM-5. El catalizador Co-Mordenita más activo se ensayó con una mezcla reactiva donde predominó el NO en lugar del NO2 bajo condiciones secas e hidrotérmicas y en presencia de SO2. Con la adición de 8% de agua a la mezcla de reacción se observó desactivación reversible, especialmente a bajas temperaturas. La adición de 60 ppm de SO2 disminuyó la velocidad de reacción aproximadamente a la mitad debido posiblemente al envenenamiento de algunos sitios activos.

  10. Photonic bandgap fiber lasers and multicore fiber lasers for next generation high power lasers

    DEFF Research Database (Denmark)

    Shirakawa, A.; Chen, M.; Suzuki, Y.

    2014-01-01

    Photonic bandgap fiber lasers are realizing new laser spectra and nonlinearity mitigation that a conventional fiber laser cannot. Multicore fiber lasers are a promising tool for power scaling by coherent beam combination. © 2014 OSA....

  11. Laser in operative dentistry

    Directory of Open Access Journals (Sweden)

    E. Yasini

    1994-06-01

    Full Text Available Today laser has a lot of usage in medicine and dentistry. In the field of dentistry, laser is used in soft tissue surgery, sterilization of canals (in root canal therapy and in restorative dentistry laser is used for cavity preparation, caries removal, sealing the grooves (in preventive dentistry, etching enamel and dentin, composite polymerization and removal of tooth sensitivity. The use of Co2 lasers and Nd: YAG for cavity preparation, due to creating high heat causes darkness and cracks around the region of laser radiation. Also due to high temperature of these lasers, pulp damage is inevitable. So today, by using the Excimer laser especially the argon floride type with a wavelength of 193 nm, the problem of heat stress have been solved, but the use of lasers in dentistry, especially for cavity preparation needs more researches and evaluations.

  12. Laser for fusion energy

    International Nuclear Information System (INIS)

    Holzrichter, J.F.

    1995-01-01

    Solid state lasers have proven to be very versatile tools for the study and demonstration of inertial confinement fusion principles. When lasers were first contemplated to be used for the compression of fusion fuel in the late 1950s, the laser output energy levels were nominally one joule and the power levels were 10 3 watts (pulse duration's of 10 -3 sec). During the last 25 years, lasers optimized for fusion research have been increased in power to typically 100,000 joules with power levels approaching 10 14 watts. As a result of experiments with such lasers at many locations, DT target performance has been shown to be consistent with high gain target output. However, the demonstration of ignition and gain requires laser energies of several megajoules. Laser technology improvements demonstrated over the past decade appear to make possible the construction of such multimegajoule lasers at affordable costs. (author)

  13. Radiological protection against lasers

    Energy Technology Data Exchange (ETDEWEB)

    Ballereau, P

    1974-04-01

    A brief description of the biological effects of laser beams is followed by a review of the factors involved in eye and skin damage (factors linked with the nature of lasers and those linked with the organ affected) and a discussion of the problems involved in the determination of threshold exposure levels. Preventive measures are recommended, according to the type of laser (high-energy pulse laser, continuous laser, gas laser). No legislation on the subject exists in France or in Europe. Types of lasers marketed, threshold exposure levels for eye and skin, variations of admissible exposure levels according to wavelength, etc. are presented in tabular form. Nomogram for determination of safe distance for direct vision of a laser is included.

  14. Advances in Fiber Lasers

    National Research Council Canada - National Science Library

    Morse, T

    1999-01-01

    Most of the time of this contract has been devoted toward improvements in optical fiber lasers and toward gathering experience to improve our program in high power, cladding pumped optical fiber lasers...

  15. Laser Processing and Chemistry

    CERN Document Server

    Bäuerle, Dieter

    2011-01-01

    This book gives an overview of the fundamentals and applications of laser-matter interactions, in particular with regard to laser material processing. Special attention is given to laser-induced physical and chemical processes at gas-solid, liquid-solid, and solid-solid interfaces. Starting with the background physics, the book proceeds to examine applications of lasers in “standard” laser machining and laser chemical processing (LCP), including the patterning, coating, and modification of material surfaces. This fourth edition has been enlarged to cover the rapid advances in the understanding of the dynamics of materials under the action of ultrashort laser pulses, and to include a number of new topics, in particular the increasing importance of lasers in various different fields of surface functionalizations and nanotechnology. In two additional chapters, recent developments in biotechnology, medicine, art conservation and restoration are summarized. Graduate students, physicists, chemists, engineers, a...

  16. Fiber Laser Array

    National Research Council Canada - National Science Library

    Simpson, Thomas

    2002-01-01

    ...., field-dependent, loss within the coupled laser array. During this program, Jaycor focused on the construction and use of an experimental apparatus that can be used to investigate the coherent combination of an array of fiber lasers...

  17. ISTEF Laser Radar Program

    National Research Council Canada - National Science Library

    Stryjewski, John

    1998-01-01

    The BMDO Innovative Science and Technology Experimentation Facility (BMDO/ISTEF) laser radar program is engaged in an ongoing program to develop and demonstrate advanced laser radar concepts for Ballistic Missile Defense (BMD...

  18. Wavelength sweepable laser source

    DEFF Research Database (Denmark)

    2014-01-01

    Wavelength sweepable laser source is disclosed, wherein the laser source is a semiconductor laser source adapted for generating laser light at a lasing wavelength. The laser source comprises a substrate, a first reflector, and a second reflector. The first and second reflector together defines...... and having a rest position, the second reflector and suspension together defining a microelectromechanical MEMS oscillator. The MEMS oscillator has a resonance frequency and is adapted for oscillating the second reflector on either side of the rest position.; The laser source further comprises electrical...... connections adapted for applying an electric field to the MEMS oscillator. Furthermore, a laser source system and a method of use of the laser source are disclosed....

  19. Laser surgery - skin

    Science.gov (United States)

    ... Bleeding Problem not going away Infection Pain Scarring Skin color changes Some laser surgery is done when you are asleep and ... TG, Elston DM, eds. Andrews' Diseases of the Skin: Clinical ... lasers, lights, and tissue interactions. In: Hruza GJ, Avram ...

  20. Manejo de conductos radiculares con curvatura marcada

    Directory of Open Access Journals (Sweden)

    Jorge Mario Nuñez Duran

    2013-10-01

    Full Text Available Las variaciones anatómicas en dientes con conductos que poseen dilaceraciones hacen del tratamiento de endodonciaun reto o una complicación relativa, en donde el clínico debe desarrollar toda su habilidad y el uso de instrumentosespeciales que faciliten u optimicen la terapia de conductos radiculares. La toma de radiografías previas con diferentesangulaciones y el estudio minucioso de ellas, darán una ayuda fundamental para conocer más detalladamente estacomplicación anatómica, que en algunos casos es muy frecuente. El uso de instrumental más flexible y resistentepermite llegar con mayor precisión y seguridad a la parte apical sin que se corra el riesgo de fracturar los instrumentos,limpiándolos y modelándolos en toda su extensión para poder obturarlos de una manera correcta.El uso de limas de menor calibre, precurvadas, permite acceder a la porción dilacerada de la raíz. Este es un métodoeficaz para prevenir la perdida de longitud de trabajo y evitar así las perforaciones de las raíces durante la preparación.Dentro de los errores más comunes durante la instrumentación de los conductos está la perdida de longitud detrabajo, junto con la transportación del foramen apical, ya sea de manera externa o interna. En el presente artículose menciona el uso de nuevas y mejores técnicas usadas para poder evitar este tipo de errores y se muestra un casoclínico del manejo de un molar superior con una curvatura de 40 grados que fue preparado y obturado exitosamentecon el sistema Protaper (Dentsply- maillefer.

  1. Variables socionutricionales de hogares mazahuas integrados por preescolares desnutridos con madres con obesidad y sin obesidad

    OpenAIRE

    Viridiana Vanessa Conzuelo-González

    2009-01-01

    El primer objetivo fue conocer cuántos menores de cinco años con diferentes grados de desnutrición tienen una madre con sobrepeso/obesidad/ en una comunidad indígena que vive en extrema pobreza y bajo condiciones de migración masculina internacional. El segundo fue comparar tres variables socionutricionales (ingreso familiar, educación de la madre y adecuación nutrimental de la dieta diaria) entre estos hogares y los hogares con desnutrición infantil y madres sin obesidad. Se realizó un estud...

  2. Terapias alternativas con animales para niños con necesidades especiales

    OpenAIRE

    Cea-Chueca, Aihnoa

    2014-01-01

    El presente trabajo de fin de grado consiste en la realización de un análisis y descripción de la literatura acerca de las distintas terapias animales, destinadas a niños con necesidades especiales: cómo y por qué surgieron, en qué consisten las terapias, cómo podemos utilizarlas, etc. Las terapias alternativas con animales se conocen como una alternativa terapéutica, donde se utiliza a un animal como co-terapeuta para poder desarrollar diferentes capacidades de los niños con necesidades espe...

  3. Variables socionutricionales de hogares mazahuas integrados por preescolares desnutridos con madres con obesidad y sin obesidad

    OpenAIRE

    Viridiana Vanessa Conzuelo-González; Ivonne Vizcarra-Bordi

    2009-01-01

    El primer objetivo fue conocer cuántos menores de cinco años con diferentes grados de desnutrición tienen una madre con sobrepeso/obesidad/ en una comunidad indígena que vive en extrema pobreza y bajo condiciones de migración masculina internacional. El segundo fue comparar tres variables socionutricionales (ingreso familiar, educación de la madre y adecuación nutrimental de la dieta diaria) entre estos hogares y los hogares con desnutrición infantil y madres sin obesidad. Se realizó un est...

  4. Laser in operative dentistry

    OpenAIRE

    E. Yasini; Gh. Rahbari; A. Matorian

    1994-01-01

    Today laser has a lot of usage in medicine and dentistry. In the field of dentistry, laser is used in soft tissue surgery, sterilization of canals (in root canal therapy) and in restorative dentistry laser is used for cavity preparation, caries removal, sealing the grooves (in preventive dentistry), etching enamel and dentin, composite polymerization and removal of tooth sensitivity. The use of Co2 lasers and Nd: YAG for cavity preparation, due to creating high heat causes darkness and cracks...

  5. Tunable laser optics

    CERN Document Server

    Duarte, FJ

    2015-01-01

    This Second Edition of a bestselling book describes the optics and optical principles needed to build lasers. It also highlights the optics instrumentation necessary to characterize laser emissions and focuses on laser-based optical instrumentation. The book emphasizes practical and utilitarian aspects of relevant optics including the essential theory. This revised, expanded, and improved edition contains new material on tunable lasers and discusses relevant topics in quantum optics.

  6. Laser cutting system

    Science.gov (United States)

    Dougherty, Thomas J

    2015-03-03

    A workpiece cutting apparatus includes a laser source, a first suction system, and a first finger configured to guide a workpiece as it moves past the laser source. The first finger includes a first end provided adjacent a point where a laser from the laser source cuts the workpiece, and the first end of the first finger includes an aperture in fluid communication with the first suction system.

  7. Application of Various Lasers to Laser Trimming Resistance System

    Institute of Scientific and Technical Information of China (English)

    SUN Ji-feng

    2007-01-01

    Though the laser trimming resistance has been an old laser machining industry for over 30 years, the development of technology brings new alternative lasers which can be used for the traditional machining. The paper describes application of various lasers to laser trimming resistance system including early traditional krypton arc lamp pumped Nd:YAG to laser, modern popular diode pumped solid state laser and the present advanced harmonic diode pumped solid state laser. Using the new alternative lasers in the laser trimming resistance system can dramatically improve the yields and equipment performance.

  8. Laser technologies for laser accelerators. Annual report

    International Nuclear Information System (INIS)

    1985-01-01

    The primary result of the work reported is the determination of laser system architectures that satsify the requirements of high luminosity, high energy (about 1 TeV), electron accelerators. It has been found that high laser efficiency is a very hard driver for these accelerators as the total average laser output optical power is likely to fall above 10 MW. The luminosity requires rep rates in the kHz range, and individual pulse lengths in the 1-10 psec range are required to satisfy acceleration gradient goals. CO 2 and KrF lasers were chosen for study because of their potential to simultaneously satisfy the given requirements. Accelerator luminosity is reviewed, and requirements on laser system average power and rep rate are determined as a function of electron beam bunch parameters. Laser technologies are reviewed, including CO 2 , excimers, solid state, and free electron lasers. The proposed accelerator mechanisms are summarized briefly. Work on optical transport geometries for near and far field accelerators are presented. Possible exploitation of the CO 2 and DrF laser technology to generate the required pulse lengths, rep rates, and projected efficiencies is illustrated and needed development work is suggested. Initial efforts at developing a 50 GeV benchmark conceptual design and a 100 MeV demonstration experiment conceptual design are presented

  9. Laser induced pyrolysis techniques

    International Nuclear Information System (INIS)

    Vanderborgh, N.E.

    1976-01-01

    The application of laser pyrolysis techniques to the problems of chemical analysis is discussed. The processes occurring during laser pyrolysis are first briefly reviewed. The problems encountered in laser pyrolysis gas chromatography are discussed using the analysis of phenanthrene and binary hydrocarbons. The application of this technique to the characterization of naturally occurring carbonaceous material such as oil shales and coal is illustrated

  10. Solar pumped laser

    Science.gov (United States)

    Lee, J. H.; Hohl, F.; Weaver, W. R. (Inventor)

    1984-01-01

    A solar pumped laser is described in which the lasant is a gas that will photodissociate and lase when subjected to sunrays. Sunrays are collected and directed onto the gas lasant to cause it to lase. Applications to laser propulsion and laser power transmission are discussed.

  11. Introducing the Yellow Laser

    Science.gov (United States)

    Lincoln, James

    2018-01-01

    The author has acquired a yellow laser with the specific wavelength of 589 nm. Because this is the first time such a laser has been discussed in this journal, I feel it is appropriate to provide a discussion of its function and capabilities. Normal laser safety should be employed, such as not pointing it into eyes or at people, and using eye…

  12. Coatings for laser fusion

    International Nuclear Information System (INIS)

    Lowdermilk, W.H.

    1981-01-01

    Optical coatings are used in lasers systems for fusion research to control beam propagation and reduce surface reflection losses. The performance of coatings is important in the design, reliability, energy output, and cost of the laser systems. Significant developments in coating technology are required for future lasers for fusion research and eventual power reactors

  13. uv dye lasers

    International Nuclear Information System (INIS)

    Abakumov, G.A.; Fadeev, V.V.; Khokhlov, R.V.; Simonov, A.P.

    1975-01-01

    The most important property of visible dye lasers, that is, continuous wavelength tuning, stimulated the search for dyes capable to lase in uv. They were found in 1968. Now the need for tunable uv lasers for applications in spectroscopy, photochemistry, isotope separation, remote air and sea probing, etc. is clearly seen. A review of some recent advances in uv dye lasers is reviewed

  14. LaserFest Celebration

    Energy Technology Data Exchange (ETDEWEB)

    Dr. Alan Chodos; Elizabeth A. Rogan

    2011-08-25

    LaserFest was the yearlong celebration, during 2010, of the 50th anniversary of the demonstration of the first working laser. The goals of LaserFest were: to highlight the impact of the laser in its manifold commercial, industrial and medical applications, and as a tool for ongoing scientific research; to use the laser as one example that illustrates, more generally, the route from scientific innovation to technological application; to use the laser as a vehicle for outreach, to stimulate interest among students and the public in aspects of physical science; to recognize and honor the pioneers who developed the laser and its many applications; to increase awareness among policymakers of the importance of R&D funding as evidenced by such technology as lasers. One way in which LaserFest sought to meet its goals was to encourage relevant activities at a local level all across the country -- and also abroad -- that would be identified with the larger purposes of the celebration and would carry the LaserFest name. Organizers were encouraged to record and advertise these events through a continually updated web-based calendar. Four projects were explicitly detailed in the proposals: 1) LaserFest on the Road; 2) Videos; 3) Educational material; and 4) Laser Days.

  15. Laser beam cutting method. Laser ko ni yoru kaitai koho

    Energy Technology Data Exchange (ETDEWEB)

    Kutsumizu, A. (Obayashi Corp., Osaka (Japan))

    1991-07-01

    In this special issue paper concerning the demolition of concrete structures, was introduced a demolition of concrete structures using laser, of which practical application is expected due to the remarkable progress of generating power and efficiency of laser radiator. The characteristics of laser beam which can give a temperature of one million centigrade at the irradiated spot, the laser radiator consisting of laser medium, laser resonator and pumping apparatus, and the laser kinds for working, such as CO{sub 2} laser, YAG laser and CO laser, were described. The basic constitution of laser cutting equipment consisting of large generating power radiator, beam transmitter, beam condenser, and nozzle for working was also illustrated. Furthermore, strong and weak points in the laser cutting for concrete and reinforcement were enumerated. Applications of laser to cutting of reinforced and unreinforced concrete constructions were shown, and the concept and safety measure for application of laser to practical demolition was discussed. 5 refs., 8 figs.

  16. LA FORMACION DE LOS DOCENTES EN LA INTERVENCION CON ALUMNOS/AS CON DEFICIT DE ATENCION CON HIPERACTIVIDAD (TDAH

    Directory of Open Access Journals (Sweden)

    Francisco D. Fernández Martín

    2004-06-01

    Full Text Available La presencia del Trastorno por d.ficit de atención con hiperactividad (TDAH en algunos/as de nuestros/as alumnos/as ocasiona serios problemas para que estos/as se adapten al contexto escolar y sociofamiliar en el que se desenvuelven, debido a la presencia de una serie de dificultades: hiperactividad, dificultades para mantener la atenci.n, autorregular la conducta, controlarse, etc.

  17. Esporotricosis cutánea diseminada con compromiso articular en una mujer con diabetes tipo 2

    Directory of Open Access Journals (Sweden)

    Sendy Solorzano

    Full Text Available La esporotricosis diseminada es una presentación infrecuente de esta micosis. Aunque ha sido descrita en sujetos inmunocompetentes, con frecuencia existe compromiso de la inmunidad mediada por células T. Reportamos el caso de una mujer con diabetes tipo 2 no controlada que desarrolló esporotricosis cutánea diseminada. El curso de la enfermedad presentó varias complicaciones que incluyeron hepatitis secundaria a itraconazol y artritis de la rodilla con cultivo positivo para Sporothrix schenckii durante el tratamiento con solución saturada de ioduro de potasio. La discusión del caso incluye aspectos de la patogénesis de la esporotricosis diseminada y el manejo de la infección y sus complicaciones.

  18. Riesgo familiar total en familias con mujeres diagnosticadas con neoplasia de mama

    Directory of Open Access Journals (Sweden)

    Nancy Cecilia Charrys-Bravo

    2017-07-01

    Full Text Available Objetivo: Determinar el riesgo familiar total de las familias con mujeres diagnosticadas con cáncer de mama, que asisten a un centro de salud oncológico en la ciudad de Barranquilla. Materiales y Métodos: El estudio fue de tipo descriptivo, transversal con abordaje cuantitativo. Se utilizó el instrumento Riesgo Familiar Total RFT 5-33. El universo estuvo conformado por familias con mujeres diagnosticadas con cáncer en mama. La muestra fue de 41 familias que integraron a 154 miembros; se abordó el estudio de manera censal, y no por medio de una muestra, porque el acceso a la información de la totalidad de las familia fue viable. Resultados: Los resultados mostraron que las familias, en su mayoría, son de tipo 2. El 68 % de las pacientes categorizan sus familias como amenazadas, el 5 % como familias de alto riesgo y un 27 % de las familias con un bajo riesgo. Conclusiones: Los hallazgos encontrados en esta investigación son importantes para las familias, lo cual permitirá establecer acciones y actividades que logren orientar e implementar procesos de atención específicos con el propósito de cuidar a las familias para que se mantengan sanos en un nivel de bajo riesgo; además, desarrollar controles y seguimiento a aquellas familias que se encuentran en un riesgo alto de amenazas, mediante acciones de promoción y prevención de la enfermedad de una manera amplia. Por lo anterior, se deben emprender programas más agresivos de prevención y promoción, especialmente con las familias que asisten en busca de apoyo médico para este padecimiento; de esta forma, se podrán diagnosticar los casos de forma temprana y proceder al respectivo tratamiento.

  19. Materiales nanocumpuestos basados en LDPE relleno con nanotubos de carbono con potenciales propiedades bactericidas

    OpenAIRE

    Benigno Escribano, Erika

    2015-01-01

    En este trabajo, se ha seleccionado como material de estudio polietileno de baja densidad, LDPE, ya que es un polímero con múltiples aplicaciones en diversos campos. Se busca como objetivo principal, preparar y caracterizar nuevos materiales basados en LDPE con potenciales propiedades antibacterianas. Para ello, se van a estudiar dos posibles maneras de conseguirlo: La primera de ellas, consiste en realizar un procesado mecánico sobre el polietileno, concretamente, una molienda del alta en...

  20. Introduction to laser technology

    CERN Document Server

    Hitz, C Breck; Hecht, Jeff; Hitz, C Breck; John Wiley & Sons

    2001-01-01

    Electrical Engineering Introduction to Laser Technology , Third Edition. Would you like to know how a laser works, and how it can be modified for your own specific tasks? This intuitive third edition-previously published as Understanding Laser Technology , First and Second Editions-introduces engineers, scientists, technicians, and novices alike to the world of modern lasers, without delving into the mathematical details of quantum electronics. It is the only introductory text on the market today that explains the underlying physics and engineering applicable to all lasers. A unique combinatio.

  1. Quantum well lasers

    CERN Document Server

    Zory, Jr, Peter S; Kelley, Paul

    1993-01-01

    This book provides the information necessary for the reader to achieve a thorough understanding of all aspects of QW lasers - from the basic mechanism of optical gain, through the current technolgoical state of the art, to the future technologies of quantum wires and quantum dots. In view of the growing importance of QW lasers, this book should be read by all those with an active interest in laser science and technology, from the advanced student to the experienced laser scientist.* The first comprehensive book-length treatment of quantum well lasers* Provides a detailed treatment

  2. Coherent laser beam combining

    CERN Document Server

    Brignon, Arnaud

    2013-01-01

    Recently, the improvement of diode pumping in solid state lasers and the development of double clad fiber lasers have allowed to maintain excellent laser beam quality with single mode fibers. However, the fiber output power if often limited below a power damage threshold. Coherent laser beam combining (CLBC) brings a solution to these limitations by identifying the most efficient architectures and allowing for excellent spectral and spatial quality. This knowledge will become critical for the design of the next generation high-power lasers and is of major interest to many industrial, environme

  3. The laser thermonuclear fusion

    International Nuclear Information System (INIS)

    Coutant, J.; Dautray, R.; Decroisette, M.; Watteau, J.P.

    1987-01-01

    Principle of the thermonuclear fusion by inertial confinement: required characteristics of the deuterium-tritium plasma and of the high power lasers to be used Development of high power lasers: active media used; amplifiers; frequency conversion; beam quality; pulse conditioning; existing large systems. The laser-matter interaction: collision and collective interaction of the laser radiation with matter; transport of the absorbed energy; heating and compression of deuterium-tritium; diagnoses and their comparison with the numerical simulation of the experiment; performances. Conclusions: difficulties to overcome; megajoule lasers; other energy source: particles beams [fr

  4. Laser Cutting, Development Trends

    DEFF Research Database (Denmark)

    Olsen, Flemming Ove

    1999-01-01

    In this paper a short review of the development trends in laser cutting will be given.The technology, which is the fastest expanding industrial production technology will develop in both its core market segment: Flat bed cutting of sheet metal, as it will expand in heavy industry and in cutting...... of 3-dimensional shapes.The CO2-laser will also in the near future be the dominating laser source in the market, although the new developments in ND-YAG-lasers opens for new possibilities for this laser type....

  5. Lasers in space.

    CSIR Research Space (South Africa)

    Michaelis, MM

    2008-04-01

    Full Text Available cube, laser beam reflectors, placed on the Moon half a century ago. These early achievements will soon be followed by a plethora of experiments involving lasers in low earth orbit (LEO) or at Lagrange points. And not much later, laser communications... will stretch out as far as Mars and beyond. One important low Earth orbit (LEO) application is the removal of space debris by Earth based or LEO relayed lasers as promoted by Phipps et al.3. Another is military communication. The prominent L1 laser space...

  6. Tunable laser applications

    CERN Document Server

    Duarte, FJ

    2008-01-01

    Introduction F. J. Duarte Spectroscopic Applications of Tunable Optical Parametric Oscillators B. J. Orr, R. T. White, and Y. He Solid-State Dye Lasers Costela, I. García-Moreno, and R. Sastre Tunable Lasers Based on Dye-Doped Polymer Gain Media Incorporating Homogeneous Distributions of Functional Nanoparticles F. J. Duarte and R. O. James Broadly Tunable External-Cavity Semiconductor Lasers F. J. Duarte Tunable Fiber Lasers T. M. Shay and F. J. Duarte Fiber Laser Overview and Medical Applications

  7. International Field Reversible Thermal Connector (RevCon) Challenge

    Science.gov (United States)

    2016-07-01

    direct metal laser sintering (DMLS) is chosen to fabricate the sophisticated wedge surfaces with...University 1st Prototype: MissStateU delivered a laser metal direct sintering (LMDS) piece, with oscillating heat pipes embedded in the device. The device...University DMLS direct metal laser sintering GIT Georgia Institute of Technology LMDS laser metal direct sintering MissStateU Mississippi

  8. New solid laser: Ceramic laser. From ultra stable laser to ultra high output laser

    International Nuclear Information System (INIS)

    Ueda, Kenichi

    2006-01-01

    An epoch-making solid laser is developed. It is ceramic laser, polycrystal, which is produced as same as glass and shows ultra high output. Ti 3+ :Al 2 O 3 laser crystal and the CPA (chirped pulse amplification) technique realized new ultra high output lasers. Japan has developed various kinds of ceramic lasers, from 10 -2 to 67 x 10 3 w average output, since 1995. These ceramic lasers were studied by gravitational radiation astronomy. The scattering coefficient of ceramic laser is smaller than single crystals. The new fast ignition method is proposed by Institute of Laser Engineering of Osaka University, Japan. Ultra-intense short pulse laser can inject the required energy to the high-density imploded core plasma within the core disassembling time. Ti 3+ :Al 2 O 3 crystal for laser, ceramic YAG of large caliber for 100 kW, transparent laser ceramic from nano-crystals, crystal grain and boundary layer between grains, the scattering coefficient of single crystal and ceramic, and the derived release cross section of Yb:YAG ceramic are described. (S.Y.)

  9. Advanced lasers for fusion

    International Nuclear Information System (INIS)

    Krupke, W.F.; George, E.V.; Haas, R.A.

    1979-01-01

    Laser drive systems' performance requirements for fusion reactors are developed following a review of the principles of inertial confinement fusion and of the technical status of fusion research lasers (Nd:glass; CO 2 , iodine). These requirements are analyzed in the context of energy-storing laser media with respect to laser systems design issues: optical damage and breakdown, medium excitation, parasitics and superfluorescence depumping, energy extraction physics, medium optical quality, and gas flow. Three types of energy-storing laser media of potential utility are identified and singled out for detailed review: (1) Group VI atomic lasers, (2) rare earth solid state hybrid lasers, and (3) rare earth molecular vapor lasers. The use of highly-radiative laser media, particularly the rare-gas monohalide excimers, are discussed in the context of short pulse fusion applications. The concept of backward wave Raman pulse compression is considered as an attractive technique for this purpose. The basic physics and device parameters of these four laser systems are reviewed and conceptual designs for high energy laser systems are presented. Preliminary estimates for systems efficiencies are given. (Auth.)

  10. Micromachining with copper lasers

    Science.gov (United States)

    Knowles, Martyn R. H.; Bell, Andy; Foster-Turner, Gideon; Rutterford, Graham; Chudzicki, J.; Kearsley, Andrew J.

    1997-04-01

    In recent years the copper laser has undergone extensive development and has emerged as a leading and unique laser for micromachining. The copper laser is a high average power (10 - 250 W), high pulse repetition rate (2 - 32 kHz), visible laser (511 nm and 578 nm) that produces high peak power (typically 200 kW), short pulses (30 ns) and very good beam quality (diffraction limited). This unique set of laser parameters results in exceptional micro-machining in a wide variety of materials. Typical examples of the capabilities of the copper laser include the drilling of small holes (10 - 200 micrometer diameter) in materials as diverse as steel, ceramic, diamond and polyimide with micron precision and low taper (less than 1 degree) cutting and profiling of diamond. Application of the copper laser covers the electronic, aerospace, automotive, nuclear, medical and precision engineering industries.

  11. Laser Applications in Orthodontics

    Science.gov (United States)

    Heidari, Somayeh; Torkan, Sepideh

    2013-01-01

    A laser is a collimated single wavelength of light which delivers a concentrated source of energy. Soon after different types of lasers were invented, investigators began to examine the effects of different wavelengths of laser energy on oral tissues, routine dental procedures and experimental applications. Orthodontists, along with other specialist in different fields of dentistry, can now benefit from several different advantages that lasers provide during the treatment process, from the beginning of the treatment, when separators are placed, to the time of resin residues removal from the tooth surface at the end of orthodontic treatment. This article outlines some of the most common usages of laser beam in orthodontics and also provides a comparison between laser and other conventional method that were the standard of care prior to the advent of laser in this field. PMID:25606324

  12. ORION laser target diagnostics

    International Nuclear Information System (INIS)

    Bentley, C. D.; Edwards, R. D.; Andrew, J. E.; James, S. F.; Gardner, M. D.; Comley, A. J.; Vaughan, K.; Horsfield, C. J.; Rubery, M. S.; Rothman, S. D.; Daykin, S.; Masoero, S. J.; Palmer, J. B.; Meadowcroft, A. L.; Williams, B. M.; Gumbrell, E. T.; Fyrth, J. D.; Brown, C. R. D.; Hill, M. P.; Oades, K.

    2012-01-01

    The ORION laser facility is one of the UK's premier laser facilities which became operational at AWE in 2010. Its primary mission is one of stockpile stewardship, ORION will extend the UK's experimental plasma physics capability to the high temperature, high density regime relevant to Atomic Weapons Establishment's (AWE) program. The ORION laser combines ten laser beams operating in the ns regime with two sub ps short pulse chirped pulse amplification beams. This gives the UK a unique combined long pulse/short pulse laser capability which is not only available to AWE personnel but also gives access to our international partners and visiting UK academia. The ORION laser facility is equipped with a comprehensive suite of some 45 diagnostics covering optical, particle, and x-ray diagnostics all able to image the laser target interaction point. This paper focuses on a small selection of these diagnostics.

  13. ORION laser target diagnostics.

    Science.gov (United States)

    Bentley, C D; Edwards, R D; Andrew, J E; James, S F; Gardner, M D; Comley, A J; Vaughan, K; Horsfield, C J; Rubery, M S; Rothman, S D; Daykin, S; Masoero, S J; Palmer, J B; Meadowcroft, A L; Williams, B M; Gumbrell, E T; Fyrth, J D; Brown, C R D; Hill, M P; Oades, K; Wright, M J; Hood, B A; Kemshall, P

    2012-10-01

    The ORION laser facility is one of the UK's premier laser facilities which became operational at AWE in 2010. Its primary mission is one of stockpile stewardship, ORION will extend the UK's experimental plasma physics capability to the high temperature, high density regime relevant to Atomic Weapons Establishment's (AWE) program. The ORION laser combines ten laser beams operating in the ns regime with two sub ps short pulse chirped pulse amplification beams. This gives the UK a unique combined long pulse/short pulse laser capability which is not only available to AWE personnel but also gives access to our international partners and visiting UK academia. The ORION laser facility is equipped with a comprehensive suite of some 45 diagnostics covering optical, particle, and x-ray diagnostics all able to image the laser target interaction point. This paper focuses on a small selection of these diagnostics.

  14. Robot-laser system

    International Nuclear Information System (INIS)

    Akeel, H.A.

    1987-01-01

    A robot-laser system is described for providing a laser beam at a desired location, the system comprising: a laser beam source; a robot including a plurality of movable parts including a hollow robot arm having a central axis along which the laser source directs the laser beam; at least one mirror for reflecting the laser beam from the source to the desired location, the mirror being mounted within the robot arm to move therewith and relative thereto to about a transverse axis that extends angularly to the central axis of the robot arm; and an automatic programmable control system for automatically moving the mirror about the transverse axis relative to and in synchronization with movement of the robot arm to thereby direct the laser beam to the desired location as the arm is moved

  15. Laser safety in dentistry

    Science.gov (United States)

    Wigdor, Harvey A.

    1997-05-01

    One of the major causes of anxiety in the dental clinic is the dental handpiece. Because dentists wish to provide a method which can replace the drill there has often been a premature use of the laser in dentistry. Various lasers have been introduced into the clinic before research has shown the laser used is of clinical benefit. Any new treatment method must not compromise the health of the patient being treated. Thus a method of evaluating the clinical abilities of dentists and their understanding the limitations of the laser used must be developed. Dentist must be trained in the basic interaction of the laser on oral tissues. The training has to concentrate on the variation of the laser wavelength absorption in the different tissues of the oral cavity. Because of the differences in the optical properties of these tissues great care must be exercised by practitioners using lasers on patients.

  16. Lasers in materials science

    CERN Document Server

    Ossi, Paolo; Zhigilei, Leonid

    2014-01-01

    This book covers various aspects of lasers in materials science, including a comprehensive overview on basic principles of laser-materials interactions and applications enabled by pulsed laser systems.  The material is organized in a coherent way, providing the reader with a harmonic architecture. While systematically covering the major current and emerging areas of lasers processing applications, the Volume provides examples of targeted modification of material properties achieved through careful control of the processing conditions and laser irradiation parameters. Special emphasis is placed on specific strategies aimed at nanoscale control of material structure and properties to match the stringent requirements of modern applications.  Laser fabrication of novel nanomaterials, which expands to the domains of photonics, photovoltaics, sensing, and biomedical applications, is also discussed in the Volume. This book assembles chapters based on lectures delivered at the Venice International School on Lasers...

  17. Alternate laser fusion drivers

    International Nuclear Information System (INIS)

    Pleasance, L.D.

    1979-11-01

    One objective of research on inertial confinement fusion is the development of a power generating system based on this concept. Realization of this goal will depend on the availability of a suitable laser or other system to drive the power plant. The primary laser systems used for laser fusion research, Nd 3+ : Glass and CO 2 , have characteristics which may preclude their use for this application. Glass lasers are presently perceived to be incapable of sufficiently high average power operation and the CO 2 laser may be limited by and issues associated with target coupling. These general perceptions have encouraged a search for alternatives to the present systems. The search for new lasers has been directed generally towards shorter wavelengths; most of the new lasers discovered in the past few years have been in the visible and ultraviolet region of the spectrum. Virtually all of them have been advocated as the most promising candidate for a fusion driver at one time or another

  18. Flexible Laser Metal Cutting

    DEFF Research Database (Denmark)

    Villumsen, Sigurd; Jørgensen, Steffen Nordahl; Kristiansen, Morten

    2014-01-01

    This paper describes a new flexible and fast approach to laser cutting called ROBOCUT. Combined with CAD/CAM technology, laser cutting of metal provides the flexibility to perform one-of-a-kind cutting and hereby realises mass production of customised products. Today’s laser cutting techniques...... possess, despite their wide use in industry, limitations regarding speed and geometry. Research trends point towards remote laser cutting techniques which can improve speed and geometrical freedom and hereby the competitiveness of laser cutting compared to fixed-tool-based cutting technology...... such as punching. This paper presents the concepts and preliminary test results of the ROBOCUT laser cutting technology, a technology which potentially can revolutionise laser cutting....

  19. Rabdomiolisis asociada al tratamiento con valaciclovir

    Directory of Open Access Journals (Sweden)

    Héctor Enríquez Gómez

    2012-03-01

    Full Text Available La rabdomiolisis es un efecto secundario asociado a un buen número de fármacos, entre ellos los antivirales. Describimos un caso de rabdomiolisis secundaria a valaciclovir, efecto no descrito anteriormente en laliteratura, en un contexto clínico muy especial. Se trata de un varón queingresa por un golpe de calor secundario a la realización de ejercicio físicoextremo. Durante su ingreso se comienza tratamiento con valaciclovir porun herpes nasolabial, observándose en los días siguientes una marcadaelevación de las cifras de CPK que desaparece con la suspensión del mismo. Proponemos, por tanto, que ante la administración de valaciclovir ensituaciones que puedan comportar daño mitocondrial habría que realizarmonitorización estrecha de los niveles de CPK

  20. Experiencias y aprendizajes con juegos cooperativos

    Directory of Open Access Journals (Sweden)

    Evelyn Cerdas Agüero

    2013-03-01

    Full Text Available El presente trabajo tiene como objetivo presentar experiencias y aprendizajes que  han logrado algunos grupos de docentes con los que se ha trabajado por medio de talleres de juegos cooperativos para la paz. Los talleres se han facilitado desde la actividad de extensión Aula Activa: juegos cooperativos para la Educación para la Paz que se ha implementado en el  Instituto de Estudios Latinoamericanos (IDELA desde el 2006. En este trabajo  nos enfocamos en el trabajo con docentes del Ministerio de Educación Pública (MEP de Costa Rica, proceso que deja una serie de aprendizajes actitudinales, de valores, habilidades y cognocitivos.

  1. Lasers: principles, applications and energetic measures

    International Nuclear Information System (INIS)

    Subran, C.; Sagaut, J.; Lapointe, S.

    2009-01-01

    After having recalled the principles of a laser and the properties of the laser beam, the authors describe the following different types of lasers: solid state lasers, fiber lasers, semiconductor lasers, dye lasers and gas lasers. Then, their applications are given. Very high energy lasers can reproduce the phenomenon of nuclear fusion of hydrogen atoms. (O.M.)

  2. Comunicándonos con las cosas

    Directory of Open Access Journals (Sweden)

    Miguel Delgado

    2009-09-01

    Full Text Available Tras la Web 2.0 y gracias a la colaboración entre las personas, Internet sigue creciendo y evolucionando, pero esta vez a través de los objetos. La siguiente evolución pretende que las personas puedan interactuar con las cosas de una forma inteligente mediante tecnologías ampliamente utilizadas como el teléfono móvil e Internet, y tecnologías que permitan etiquetar objetos.

  3. Bacteriemia en pacientes internados con celulitis

    Directory of Open Access Journals (Sweden)

    Juan S. Lasa

    2012-08-01

    Full Text Available La celulitis es una inflamación aguda de la dermis y tejido celular subcutáneo de causa bacteriana, que generalmente complica a heridas, úlceras y dermatosis, aunque de manera frecuente no existe sitio de entrada. Se recomienda la realización de cultivo de punción de piel y partes blandas (PPB. Los hemocultivos raramente dan resultados positivos. El objetivo de este trabajo fue determinar la prevalencia de bacteriemia en pacientes internados en nuestra institución con diagnóstico de celulitis. Se analizaron retrospectivamente los registros clínicos de los pacientes con este diagnóstico al ingreso entre junio de 2007 y marzo de 2010. Se evaluaron los datos poblacionales, presencia de comorbilidades, y resultados de los cultivos. En ese período, se internaron 140 pacientes con diagnóstico de celulitis y a todos ellos se les realizó hemocultivo y cultivos de PPB. Setenta y cuatro eran varones (52.8%. La edad promedio: 47.5 ± 19.7 años (rango 16-94. El 40% tuvo cultivos positivos de PPB, en los que el Staphylococcus aureus meticilino resistente (SAMR fue el germen más frecuentemente aislado (35.7%; la prevalencia de bacteriemia fue del 8.6%, en donde el germen más frecuente fue Streptoccocus Beta hemolítico, grupo G (33% del total de hemocultivos positivos. La bacteriemia se asoció significativamente a mayor estadía hospitalaria (10.5 ± 8.9 vs. 4.9 ± 6, p = 0.004. Se asoció con mayor riesgo de hemocultivo positivo a ser diabético, tener cultivo de PPB positivo, consumo de alcohol y/o enfermedad pulmonar obstructiva crónica.

  4. Lasers in space

    Science.gov (United States)

    Michaelis, M. M.; Forbes, A.; Bingham, R.; Kellett, B. J.; Mathye, A.

    2008-05-01

    A variety of laser applications in space, past, present, future and far future are reviewed together with the contributions of some of the scientists and engineers involved, especially those that happen to have South African connections. Historically, two of the earliest laser applications in space, were atmospheric LIDAR and lunar ranging. These applications involved atmospheric physicists, several astronauts and many of the staff recruited into the Soviet and North American lunar exploration programmes. There is a strong interest in South Africa in both LIDAR and lunar ranging. Shortly after the birth of the laser (and even just prior) theoretical work on photonic propulsion and space propulsion by laser ablation was initiated by Georgii Marx, Arthur Kantrowitz and Eugen Saenger. Present or near future experimental programs are developing in the following fields: laser ablation propulsion, possibly coupled with rail gun or gas gun propulsion; interplanetary laser transmission; laser altimetry; gravity wave detection by space based Michelson interferometry; the de-orbiting of space debris by high power lasers; atom laser interferometry in space. Far future applications of laser-photonic space-propulsion were also pioneered by Carl Sagan and Robert Forward. They envisaged means of putting Saenger's ideas into practice. Forward also invented a laser based method for manufacturing solid antimatter or SANTIM, well before the ongoing experiments at CERN with anti-hydrogen production and laser-trapping. SANTIM would be an ideal propellant for interstellar missions if it could be manufactured in sufficient quantities. It would be equally useful as a power source for the transmission of information over light year distances. We briefly mention military lasers. Last but not least, we address naturally occurring lasers in space and pose the question: "did the Big Bang lase?"

  5. ORIENTACIONES CURRICULARES CON EL ENFOQUE CTS

    Directory of Open Access Journals (Sweden)

    Miguel Corchuelo

    2010-11-01

    Full Text Available Considerando que el propósito de la educación con un enfoque CTS propende por abordar problemas contextualizados socialmente, se busca construir una propuesta desde la práctica, con el fi n de fortalecer la formación para la participación ciudadana. Encontramos que abordar el tratamiento de las relaciones entre deporte, nutrición humana y motricidad convierte al cuerpo humano en un objeto de estudio vigente. En la ciudad de Popayán (Cauca, Colombia se vive una de las más altas tasas de bulimia y anorexia en adolescentes del país, al igual que de consumo de drogas ilícitas. Además, el bajo rendimiento de los deportistas caucanos en los últimos Juegos Nacionales, los casos de dopaje en atletas olímpicos, entre otros, abre interrogantes sobre la formación integral de nuestros estudiantes. Con el fi n de acercar la escuela a estas problemáticas locales y nacionales, se asume un trabajo interdisciplinario basado en la resolución de problemas socialmente relevantes. En esta oportunidad compartiremos los resultados del camino recorrido en torno a la pregunta: “El deporte: ¿emancipación o alienación?”.

  6. Aprendiendo química con golosinas

    Directory of Open Access Journals (Sweden)

    José Manuel Rodríguez Rodríguez

    2011-01-01

    Full Text Available Las golosinas (caramelos, chicles, nubes, palotes, papas fritas, etc. nos gustan a casi todos y gozan de una imagen positiva, a pesar de sus efectos secundarios si no se consumen con moderación. Aprovechándonos de esa buena imagen y de la gran variedad de golosinas que existen en el mercado, hemos diseñado una serie de experimentos con los que podemos explicar distintos tipos de reacciones químicas (ácido-base, oxidación reducción, endotérmicas¿, la actuación de un indicador e, incluso, podemos comparar cantidades de vitamina C. En todas las actividades se persigue explicar algún aspecto de la Química que, en general, el público desconoce, captando su atención, por ejemplo, mediante cambios de color espectaculares y con las golosinas como protagonistas. Así mismo, estas experiencias pueden emplearse como recursos didácticos para alumnos de 4º E.S.O. y Bachillerato, apoyando los contenidos teóricos del currículum.

  7. Calidad de vida, satisfacción con el tratamiento y bienestar emocional en pacientes con diabetes LADA

    OpenAIRE

    Granado Casas, Minerva

    2014-01-01

    Introducción: La calidad de vida, satisfacción con el tratamiento y bienestar emocional en pacientes con diabetes mellitus están relacionados con el control metabólico, las complicaciones y algunas variables socioeconómicas. Actualmente, no existe ningún estudio científico que analice la calidad de vida, satisfacción con el tratamiento y bienestar emocional en pacientes con diabetes LADA. Objetivos: Los objetivos principales fueron conocer la calidad de vida, satisfacción con el tratamient...

  8. Laser system using ultra-short laser pulses

    Science.gov (United States)

    Dantus, Marcos [Okemos, MI; Lozovoy, Vadim V [Okemos, MI; Comstock, Matthew [Milford, MI

    2009-10-27

    A laser system using ultrashort laser pulses is provided. In another aspect of the present invention, the system includes a laser, pulse shaper and detection device. A further aspect of the present invention employs a femtosecond laser and binary pulse shaping (BPS). Still another aspect of the present invention uses a laser beam pulse, a pulse shaper and a SHG crystal.

  9. "Sonríe con salud"

    Directory of Open Access Journals (Sweden)

    Rosa María González Ramos

    Full Text Available Introducción: los programas educativos juegan un papel importante ya que permiten modificar hábitos y conductas perjudiciales para la salud. Las personas de la tercera edad deben adquirir los conocimientos necesarios para realizar el auto cuidado de la salud bucal mejorando así su calidad de vida. Objetivo: evaluar los resultados del programa "Sonríe con salud". Métodos: se realizó una investigación descriptiva de corte transversal, con un universo de 74 personas de 60 años y más. Las variables estudiadas fueron: la edad, sexo. Se aplicó una encuesta. Las respuestas se agruparon atendiendo a si poseían o no, conocimientos acerca de la relación entre salud bucal y salud general, las principales enfermedades buco-dentales, realización del autoexamen bucal, efecto del tabaquismo y alcoholismo, ingestión de los alimentos azucarados, calientes, picantes y la importancia de la higiene bucal. La recolección de la información, la realizaron los autores empleando como fuente primaria el cuestionario aplicado en la primera etapa de la investigación. Se utilizaron los valores absolutos y el porcentaje en el análisis de los resultados. Resultados: el grupo de edad de 70 a 79 años fueron los más representados (36,5 % y el sexo femenino con un 59,5 %. Se elevaron los conocimientos relacionados con el efecto perjudicial del alcoholismo al 91,9 % y el tabaquismo al 95,9 %; acerca de la ingestión de alimentos azucarados se elevan al 97,7 % al igual que los alimentos calientes y picantes en un 90,5 %, relativo al autoexamen bucal se superan los conocimientos de su realización al 78,4 % y referente a la higiene bucal se elevan al 91,9 %. Conclusiones: el programa educativo "sonríe con salud" resultó eficaz, al elevar el nivel de conocimientos de los ancianos que recibieron las actividades previstas en el programa.

  10. Acogida de los solicitantes de asilo con discapacidad en Europa

    OpenAIRE

    Beduschi-Ortiz, Ana

    2010-01-01

    Con respecto a la acogida de los solicitantes de asilo en la Unión Europea, podemos encontrar disposiciones para la protección de las personas con discapacidad en una amplia gama de fuentes reguladoras.

  11. Designing of Raman laser

    International Nuclear Information System (INIS)

    Zidan, M. D.; Al-Awad, F.; Alsous, M. B.

    2005-01-01

    In this work, we describe the design of the Raman laser pumped by Frequency doubled Nd-YAG laser (λ=532 nm) to generate new laser wavelengths by shifting the frequency of the Nd-YAG laser to Stokes region (λ 1 =683 nm, λ 2 =953.6 nm, λ 3 =1579.5 nm) and Antistokes region (λ ' 1 =435 nm, λ ' 2 =369.9 nm, λ ' 3=319.8 nm). Laser resonator has been designed to increase the laser gain. It consists of two mirrors, the back mirror transmits the pump laser beam (λ=532 nm) through the Raman tube and reflects all other generated Raman laser lines. Four special front mirrors were made to be used for the four laser lines λ 1 =683 nm, λ 2 =953.6 nm and λ ' 1 = 435 nm, λ ' 2 =369.9 nm. The output energy for the lines υ 1 s, υ 2 s, υ 1 as,υ 2 as was measured. The output energy of the Raman laser was characterized for different H 2 pressure inside the tube. (Author)

  12. Factores asociados con la irregularidad de la ingesta de Dapsona en pacientes con lepra: Dapsona en pacientes con lepra

    Directory of Open Access Journals (Sweden)

    Luis Carlos Orozco Vargas

    2013-04-01

    Full Text Available Introducción: Conocer los factores asociados al cumplimiento del tratamiento en pacientes con lepra, es muy importante para prevenir la resistencia del Mycobacterium leprae y garantizar la cura bacteriológica de estas personas. La prueba de orina para Dapsona, presente en el régimen autoadministrado, es un método sencillo para establecer la regularidad del tratamiento. Objetivo: Explorar los factores asociados a la irregularidad de la ingesta del tratamiento antileproso. Métodos: Estudio de corte transversal de los enfermos que recibieron tratamiento antileproso en un centro dermatológico. La irregularidad se estableció con la prueba de dapsonuria. Se consideró irregular el que presentó la prueba negativa. Las variables sospechosas de influir en la irregularidad se analizaron con regresión logística exacta. Resultados: En el modelo final del análisis multivariado se encontraron cinco variables asociadas, entre éstas sobresalen como factores de riesgo, la ausencia de discapacidad, OR 28.56 (IC90% 1.2-2.1 y la entrega de tratamiento para tiempos mayores a un mes, por cada mes OR 3.41 (IC90% 1.4-9.2 y como factor protector, la aceptación familiar de la enfermedad OR 0.008 (IC90% 0.001-0.24. Conclusión: Aunque es posible que el pequeño tamaño de muestra no haya permitido detectar algunos factores de riesgo informados en otras investigaciones, la mayoría de esos estudios no han realizado análisis multivariado por lo cual es posible que muchos de los factores informados en la literatura no tengan importancia. Salud UIS 2013; 45 (1: 7-14

  13. Laser program overview

    International Nuclear Information System (INIS)

    Storm, E.; Coleman, L.W.

    1985-01-01

    The objectives of the Lawrence Livermore National Laboratory Laser Fusion program are to understand and develop the science and technology of inertial confinement fusion (ICF), and to utilize ICF in short- and long-term military applications, and, in the long-term, as a candidate for central-station civilian power generation. In 1984, using the Novette laser system, the authors completed experiments showing the very favorable scaling of laser-plama interactions with short-wavelength laser light. Their Novette experiments have unequivocally shown that short laser wavelength, i.e., less than 1 μm, is required to provide the drive necessary for efficient compression, ignition, and burn of DT fusion fuel. In other experiments with Novette, the authors made the first unambiguous observation of amplified spontaneous emission in the soft x-ray regime. The authors also conducted military applications and weapons physics experiments, which they discuss in detail in the classified volume of our Laser Program Annual Report. In the second thrust, advanced laser studies, they develop and test the concepts, components, and materials for present and future laser systems. Over the years, this has meant providing the technology base and scientific advances necessary to construct and operate a succession of six evermore-powerful laser systems. The latest of these, Nova, a 100-TW/100-kJ-class laser system, was completed in 1984. The Nd:glass laser continues to be the most effective and versatile tool for ICF and weapons physics because of its scalability in energy, the ability to efficiently convert its 1=μm output to shorter wavelengths, its ability to provide flexible, controlled pulse shaping, and its capability to adapt to a variety of irradiation and focusing geometries. For these reasons, many of our advanced laser studies are in areas appropriate to solid state laser technologies

  14. Laser pumped lasers for isotope separation

    International Nuclear Information System (INIS)

    Fry, S.M.

    1976-01-01

    A study of the isotope separation laser requirements reveals that high pressure polyatomic molecular gas laser pumped lasers can attain the necessary characteristics including tunability, energy output, pulse width, and repetition rate. The results of a search, made for molecules meeting the appropriate requirements for one of several pump schemes utilizing a CO 2 laser and with output in the 12 μm or 16μm wavelength range, are presented. Several methods of pumping are reviewed and two novel pump schemes are presented. A laser pumped laser device design is given, and operation of this device and associated diagnostic equipment is confirmed by repeating experiments in OCS and NH 3 . The results of OCS laser experiments show that an improvement in pump rate and output per unit length is obtained with the device, using a wedged transverse pumping scheme. A new multi-line laser system in NH 3 pumped by a TEA CO 2 laser is reported. More than forty transitions spanning the wavelength range of 9.2 to 13.8 μm are observed and identified. A strong output at 12.08 μm is one of the closest lines yet found to the required laser isotope separation wavelength. Far infrared emission near 65 μm is observed and is responsible for populating levels which lase in pure ammonia near 12.3 μm. Buffer gas (e.g., N 2 or He) pressures of approximately 40--800 torr cause energy transfer by collision-induced rotationaltransitions from the pumped antisymmetric to the lasing symmetric levels in the nu 2 = 1 band of ammonia. Most of the observed lines are aP(J,K) transitions which originate from the nu 2 /sup s/ band. Measurements of the pressure dependence of the laser output shows that some lines lase at pressures greater than one atmosphere. Transient behavior of the 12.08 μm line is calculated from a simplified analytic model and these calculations are compared to the experimental results

  15. Pattern Laser Annealing by a Pulsed Laser

    Science.gov (United States)

    Komiya, Yoshio; Hoh, Koichiro; Murakami, Koichi; Takahashi, Tetsuo; Tarui, Yasuo

    1981-10-01

    Preliminary experiments with contact-type pattern laser annealing were made for local polycrystallization of a-Si, local evaporation of a-Si and local formation of Ni-Si alloy. These experiments showed that the mask patterns can be replicated as annealed regions with a resolution of a few microns on substrates. To overcome shortcomings due to the contact type pattern annealing, a projection type reduction pattern laser annealing system is proposed for resistless low temperature pattern forming processes.

  16. High energy HF pulsed lasers

    International Nuclear Information System (INIS)

    Patterson, E.L.; Gerber, R.A.

    1976-01-01

    Recent experiments show that pulsed HF lasers are capable of producing high energy with good efficiency. Preliminary experiments show that the laser radiation from the high-gain medium can be controlled with a low-power probe laser beam or with low-level feedback. These results indicate that the HF laser may have potential for second-generation laser fusion experiments

  17. 9 CFR 319.301 - Chili con carne with beans.

    Science.gov (United States)

    2010-01-01

    ... 9 Animals and Animal Products 2 2010-01-01 2010-01-01 false Chili con carne with beans. 319.301 Section 319.301 Animals and Animal Products FOOD SAFETY AND INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE... Dehydrated Meat Food Products § 319.301 Chili con carne with beans. Chili con carne with beans shall contain...

  18. Insuficiencia renal aguda relacionada con medicamentos en pacientes hospitalizados

    Directory of Open Access Journals (Sweden)

    Lujan Iavecchia

    2015-11-01

    Conclusiones: La mitad de los episodios de IRA intrahospitalaria se relacionaron con medicamentos. Los pacientes con IRA relacionada con medicamentos presentaron más antecedentes patológicos cardiovasculares, pero menos factores de riesgo de IRA y una menor mortalidad.

  19. Coatings of metal substrates assisted by laser radiation

    Directory of Open Access Journals (Sweden)

    Caudevilla, H.

    1998-04-01

    Full Text Available In this contribution, a new way of obtaining ceramic coatings is presented. This method uses precursor suspensions, settled on substrates and in-situ pyrolised with a laser. Different deposition techniques of the ceramic precursors have been tested in order to obtain a homogeneous distribution on the metal substrate before the laser treatment.

    La combinación de recubrimientos utilizando disoluciones de precursores metálicos con la pirólisis asistida por láser, permite obtener una gran diversidad de recubrimientos sobre sustratos de muy distinta naturaleza. Se han realizado estudios, tanto con disoluciones poliméricas, como con disoluciones de tipo sol-gel y pastas obtenidas con técnicas similares, depositadas utilizando métodos convencionales de inmersión y atomización previa a la pirólisis asistida por láser, así como simultánea. En este trabajo se presenta un resumen de los resultados más significativos obtenidos en la realización de recubrimientos sobre sustratos metálicos y cerámicos.

  20. Laser Safety Inspection Criteria

    International Nuclear Information System (INIS)

    Barat, K

    2005-01-01

    A responsibility of the Laser Safety Officer (LSO) is to perform laser safety audits. The American National Standard Z136.1 Safe use of Lasers references this requirement in several sections: (1) Section 1.3.2 LSO Specific Responsibilities states under Hazard Evaluation, ''The LSO shall be responsible for hazards evaluation of laser work areas''; (2) Section 1.3.2.8, Safety Features Audits, ''The LSO shall ensure that the safety features of the laser installation facilities and laser equipment are audited periodically to assure proper operation''; and (3) Appendix D, under Survey and Inspections, it states, ''the LSO will survey by inspection, as considered necessary, all areas where laser equipment is used''. Therefore, for facilities using Class 3B and or Class 4 lasers, audits for laser safety compliance are expected to be conducted. The composition, frequency and rigueur of that inspection/audit rests in the hands of the LSO. A common practice for institutions is to develop laser audit checklists or survey forms. In many institutions, a sole Laser Safety Officer (LSO) or a number of Deputy LSO's perform these audits. For that matter, there are institutions that request users to perform a self-assessment audit. Many items on the common audit list and the associated findings are subjective because they are based on the experience and interest of the LSO or auditor in particular items on the checklist. Beam block usage is an example; to one set of eyes a particular arrangement might be completely adequate, while to another the installation may be inadequate. In order to provide more consistency, the National Ignition Facility Directorate at Lawrence Livermore National Laboratory (NIF-LLNL) has established criteria for a number of items found on the typical laser safety audit form. These criteria are distributed to laser users, and they serve two broad purposes: first, it gives the user an expectation of what will be reviewed by an auditor, and second, it is an

  1. Implementación de un método operativo para la estimación de la temperatura superficial terrestre en la Región Callao usando datos de las imágenes satelitales

    OpenAIRE

    Mendoza Nolorbe, Juan Neil

    2014-01-01

    El sensor TM del satélite Landsat 5 ha registrado datos imágenes de la superficie de la Tierra desde el año 1984 hasta inicios del año 2013, con una resolución espacial de 30m y con una frecuencia de visita cada 16 días. Los datos imágenes de este sensor son del tipo multiespectral, registrados por seis bandas espectrales, en el rango del espectro visible, infrarrojo cercano e infrarrojo térmico. La banda térmica (banda 6) del sensor TM ofrece la oportunidad de determinar la temperatura de la...

  2. Single frequency semiconductor lasers

    CERN Document Server

    Fang, Zujie; Chen, Gaoting; Qu, Ronghui

    2017-01-01

    This book systematically introduces the single frequency semiconductor laser, which is widely used in many vital advanced technologies, such as the laser cooling of atoms and atomic clock, high-precision measurements and spectroscopy, coherent optical communications, and advanced optical sensors. It presents both the fundamentals and characteristics of semiconductor lasers, including basic F-P structure and monolithic integrated structures; interprets laser noises and their measurements; and explains mechanisms and technologies relating to the main aspects of single frequency lasers, including external cavity lasers, frequency stabilization technologies, frequency sweeping, optical phase locked loops, and so on. It paints a clear, physical picture of related technologies and reviews new developments in the field as well. It will be a useful reference to graduate students, researchers, and engineers in the field.

  3. Nuclear-pumped lasers

    CERN Document Server

    Prelas, Mark

    2016-01-01

    This book focuses on Nuclear-Pumped Laser (NPL) technology and provides the reader with a fundamental understanding of NPLs, a review of research in the field, and exploration of large scale NPL system design and applications. Early chapters look at the fundamental properties of lasers, nuclear-pumping and nuclear reactions that may be used as drivers for nuclear-pumped lasers. The book goes on to explore the efficient transport of energy from the ionizing radiation to the laser medium and then the operational characteristics of existing nuclear-pumped lasers. Models based on Mathematica, explanations and a tutorial all assist the reader’s understanding of this technology. Later chapters consider the integration of the various systems involved in NPLs and the ways in which they can be used, including beyond the military agenda. As readers will discover, there are significant humanitarian applications for high energy/power lasers, such as deflecting asteroids, space propulsion, power transmission and mining....

  4. Power Laser Ablation Symposia

    CERN Document Server

    Phipps, Claude

    2007-01-01

    Laser ablation describes the interaction of intense optical fields with matter, in which atoms are selectively driven off by thermal or nonthermal mechanisms. The field of laser ablation physics is advancing so rapidly that its principal results are seen only in specialized journals and conferences. This is the first book that combines the most recent results in this rapidly advancing field with authoritative treatment of laser ablation and its applications, including the physics of high-power laser-matter interaction. Many practical applications exist, ranging from inertial confinement fusion to propulsion of aerostats for pollution monitoring to laser ignition of hypersonic engines to laser cleaning nanoscale contaminants in high-volume computer hard drive manufacture to direct observation of the electronic or dissociative states in atoms and molecules, to studying the properties of materials during 200kbar shocks developed in 200fs. Selecting topics which are representative of such a broad field is difficu...

  5. Laser induced nuclear reactions

    International Nuclear Information System (INIS)

    Ledingham, Ken; McCanny, Tom; Graham, Paul; Fang Xiao; Singhal, Ravi; Magill, Joe; Creswell, Alan; Sanderson, David; Allott, Ric; Neely, David; Norreys, Peter; Santala, Marko; Zepf, Matthew; Watts, Ian; Clark, Eugene; Krushelnick, Karl; Tatarakis, Michael; Dangor, Bucker; Machecek, Antonin; Wark, Justin

    1998-01-01

    Dramatic improvements in laser technology since 1984 have revolutionised high power laser technology. Application of chirped-pulse amplification techniques has resulted in laser intensities in excess of 10 19 W/cm 2 . In the mid to late eighties, C. K. Rhodes and K. Boyer discussed the possibility of shining laser light of this intensity onto solid surfaces and to cause nuclear transitions. In particular, irradiation of a uranium target could induce electro- and photofission in the focal region of the laser. In this paper it is shown that μCi of 62 Cu can be generated via the (γ,n) reaction by a laser with an intensity of about 10 19 Wcm -2

  6. Lasers for isotope separation

    International Nuclear Information System (INIS)

    O'Hair, E.A.; Piltch, M.S.

    1976-01-01

    The Los Alamos Scientific Laboratory is conducting research on uranium enrichment. All processes being studied employ uranium molecules and use lasers to provide isotopic selectivity and enrichment. There are four well-defined infrared frequencies and two ultraviolet frequency bands of interest. The infrared frequencies are outside the range of the available lasers and an extensive research and development activity is currently underway. Lasers are available in the uv bands, however, much development work remains. The specification for the commercial uranium enrichment plant lasers will depend upon the results of the current enrichment experiments, the laser capital cost, reliability, and maintenance cost. For the processes under investigation there are specific photon requirements but latitude in how these requirements can be met. The final laser selections for the pilot plant need not be made until the mid-1980's. Between now and that time as extensive as possible a research and development effort will be maintained

  7. Inertial fusion by laser

    International Nuclear Information System (INIS)

    Dautray, R.; Watteau, J.-P.

    1980-01-01

    Following a brief historical survey of research into the effects of interaction of laser with matter, the principles of fusion by inertial confinement are described and the main parameters and possible levels given. The development of power lasers is then discussed with details of performances of the main lasers used in various laboratories, and with an assessment of the respective merits of neodymium glass, carbon dioxide or iodine lasers. The phenomena of laser radiation and its interaction with matter is then described, with emphasis on the results of experiments concerned with target implosion with the object of compressing and heating the mixture of heavy hydrogen and tritium to be ignited. Finally, a review is made of future possibilities opened up by the use of large power lasers which have recently become operational or are being constructed, and the ground still to be covered before a reactor can be produced [fr

  8. Principles of Lasers

    CERN Document Server

    Svelto, Orazio

    2010-01-01

    This new Fifth Edition of Principles of Lasers incorporates corrections to the previous edition. The text’s essential mission remains the same: to provide a wide-ranging yet unified description of laser behavior, physics, technology, and current applications. Dr. Svelto emphasizes the physical rather than the mathematical aspects of lasers, and presents the subject in the simplest terms compatible with a correct physical understanding. Praise for earlier editions: "Professor Svelto is himself a longtime laser pioneer and his text shows the breadth of his broad acquaintance with all aspects of the field … Anyone mastering the contents of this book will be well prepared to understand advanced treatises and research papers in laser science and technology." (Arthur L. Schawlow, 1981 Nobel Laureate in Physics) "Already well established as a self-contained introduction to the physics and technology of lasers … Professor Svelto’s book, in this lucid translation by David Hanna, can be strongly recommended for...

  9. Atomic iodine laser

    International Nuclear Information System (INIS)

    Fisk, G.A.; Gusinow, M.A.; Hays, A.K.; Padrick, T.D.; Palmer, R.E.; Rice, J.K.; Truby, F.K.; Riley, M.E.

    1978-05-01

    The atomic iodine photodissociation laser has been under intensive study for a number of years. The physics associated with this system is now well understood and it is possible to produce a 0.1 nsec (or longer) near-diffraction-limited laser pulse which can be amplified with negligible temporal distortion and little spatial deformation. The output of either a saturated or unsaturated amplifier consists of a high-fidelity near-diffraction-limited, energetic laser pulse. The report is divided into three chapters. Chapter 1 is a survey of the important areas affecting efficient laser operation and summarizes the findings of Chap. 2. Chapter 2 presents detailed discussions and evaluations pertinent to pumps, chemical regeneration, and other elements in the overall laser system. Chapter 3 briefly discusses those areas that require further work and the nature of the work required to complete the full-scale evaluation of the applicability of the iodine photodissociation laser to the inertial confinement program

  10. Strong field laser physics

    CERN Document Server

    2008-01-01

    Since the invention of the laser in the 1960s, people have strived to reach higher intensities and shorter pulse durations. High intensities and ultrashort pulse durations are intimately related. Recent developments have shown that high intensity lasers also open the way to realize pulses with the shortest durations to date, giving birth to the field of attosecond science (1 asec = 10-18s). This book is about high-intensity lasers and their applications. The goal is to give an up to date introduction to the technology behind these laser systems and to the broad range of intense laser applications. These applications include AMO (atomic molecular and optical) physics, x-ray science, attosecond science, plasma physics and particle acceleration, condensed matter science and laser micromachining, and finally even high-energy physics.

  11. Tumor germinal mixto con componentes de disgerminoma y coriocarcinoma de ovario en mujer adolescente con ataxiatelangiectasia

    Directory of Open Access Journals (Sweden)

    Eduardo Augusto Gálvez-Cuitiva

    2015-11-01

    días. Se suspendió la quimioterapia porque desarrolló choque séptico que puso en riesgo su vida. Por su enfermedad de base permaneció bajo vigilancia. Actualmente, 17 meses después, la paciente vive sin actividad tumoral.  Conclusión: existe asociación entre ataxia-telangiectasia, leucemia y linfomas. Se describe el caso clínico de una paciente con ataxia-telangiectasia y tumor germinal mixto con componente de disgerminoma y coriocarcinoma de ovario. Se propone establecer un tratamiento especial para estos pacientes inmunocomprometidos, con alto riesgo de cáncer pero, a la vez, de no tolerar los esquemas habituales.

  12. Arduino based laser control

    OpenAIRE

    Bernal Muñoz, Ferran

    2015-01-01

    ARDUINO is a vey usefull platform for prototypes. In this project ARDUINO will be used for controling a Semiconductor Tuneable Laser. [ANGLÈS] Diode laser for communications control based on an Arduino board. Temperature control implementation. Software and hardware protection for the laser implementation. [CASTELLÀ] Control de un láser de comunicaciones ópticas desde el ordenador utilizando una placa Arduino. Implementación de un control de temperatura y protección software y hardware ...

  13. Shiva laser system performance

    International Nuclear Information System (INIS)

    Glaze, J.; Godwin, R.O.; Holzrichter, J.F.

    1978-01-01

    On November 18, 1977, after four years of experimentation, innovation, and construction, the Shiva High Energy Laser facility produced 10.2 kJ of focusable laser energy delivered in a 0.95 ns pulse. The Shiva laser, with its computer control system and delta amplifiers, demonstrated its versatility on May 18, 1978, when the first 20-beam target shot with delta amplifiers focused 26 TW on a target and produced a yield of 7.5 x 10 9 neutrons

  14. Lasers in Ophthalmology

    Institute of Scientific and Technical Information of China (English)

    1992-01-01

    In recent years,lasers have entered every fieldof medicine and especially so in ophthalmol-ogy.The scientific basis of lasers in ophthal-mology is based on three mechanisms:1.Photothermal effectLasers:argon,krypton,dye and diodeA thermal effect is generated when laserenergy is absorbed by pigment leading to in-creased vibration and therefore heat content.A

  15. Laser Journal (Selected Articles),

    Science.gov (United States)

    1982-09-10

    laser is described. The apparatus structure and some experimental results are reported. MATERIAL AND ELEMENT MAGNETO -OPTIC PROPERTIES OF Pr dYb),(1oAI...with a magneto -optical modulator. The measuring system is simple and sensitive, with reading accuracy of ±0.0050 and error 45%. STUDY ON EXPERIMENTAL...laser radiation therapy . He Fang de East Chiia Hospital APPLICATION OF N4d,:Y q LASER TO TREAT INTERNAL HEMERRHOID Zhuo Ruilin Zu Songlin (Shanghai

  16. Laser precision microfabrication

    CERN Document Server

    Sugioka, Koji; Pique, Alberto

    2010-01-01

    Miniaturization and high precision are rapidly becoming a requirement for many industrial processes and products. As a result, there is greater interest in the use of laser microfabrication technology to achieve these goals. This book composed of 16 chapters covers all the topics of laser precision processing from fundamental aspects to industrial applications to both inorganic and biological materials. It reviews the sate of the art of research and technological development in the area of laser processing.

  17. Tratamiento de la obesidad con productos naturales

    Directory of Open Access Journals (Sweden)

    Lina Neri Espinosa Pire

    2016-12-01

    Full Text Available Los crecientes índices de obesidad alrededor del mundo, provocados principalmente por los excesos en la ingesta y la vida sedentaria, constituye uno de los grandes problemas de salud pública en nuestras sociedades. Entre otras formas como dietas y tratamientos que surgen cada día para combatir la obesidad, el uso de plantas medicinales conocido como fitoterapia, ha despertado gran interés. Existen ciertas plantas que poseen propiedades adelgazantes, sin embargo, lo mejor es ponerse en manos de especialistas en este campo, para recibir una correcta asesoría de acuerdo a las necesidades personales. Las plantas medicinales y los productos que de ellas se obtienen, constituyen remedios eficaces para combatir la obesidad, pues no tienen efectos adversos. No obstante el tratamiento debe combinarse con un cambio de hábitos alimentarios y actividad física y no conviene utilizarlos irresponsablemente, pues no todos tienen los mismos beneficios y efectos. La eficacia de la aplicación de plantas con la finalidad de bajar de peso ha sido comprobada en numerosos ensayos clínicos que se han realizado con determinadas especies vegetales. Las plantas medicinales se han utilizado tradicionalmente en forma de infusión, sin embargo esta forma de administración no permite controlar efectivamente las dosis administradas, por lo que es preferible hacerlo en preparados como cápsulas o comprimidos. Cada planta deberá administrarse de una manera específica y es importante que los preparados se tomen siempre en el mismo horario para potenciar su efectividad.

  18. Factores prenatales relacionados con la prematuridad

    Directory of Open Access Journals (Sweden)

    Guillermo Arias Macías

    2001-03-01

    Full Text Available Se estudiaron 130 madres y sus recién nacidos prematuros con su correspondiente grupo control, nacidos en el Hospital Ginecoobstétrico Provincial Docente "Justo Legón Padilla", de Pinar del Río, desde febrero hasta julio de 1998, con el objetivo de analizar algunos factores perinatales relacionados con la prematuridad. Se analizaron las variables: edad materna, paridad, peso al inicio del embarazo, talla materna, período intergenésico, edad gestacional, oligoamnios, hipertensión arterial materna y sexo del niño. Se demostró que la edad materna inferior a 17 años, la baja talla materna, el oligoamnio, la sepsis ovular y el período intergenésico de más de 5 años tuvieron resultados significativos para el nacimiento de pretérminos.130 mothers and their premature infants with their corresponding control group delivered at "Justo Legón Padilla" Provincial Gynecoobstetric Teaching Hospital, in Pinar del Río, from February to July, 1998, were studied aimed at analyzing some perinatal factors connected with prematurity. The following variables were analyzed: maternal age, parity, weight at the beginning of pregnancy, maternal height, intergenesic period, gestational age, oligohydramnios, maternal hypertension and sex of the child. It was proved that maternal age under 17, low maternal height, the oligohydramnios, vulvar sepsis and the intergenesic period of more than 5 years had significant results for the birth of preterm infants.

  19. Rescate articular con colgajo anterolateral del muslo

    Directory of Open Access Journals (Sweden)

    F.J. García-Bernal

    2015-06-01

    Full Text Available La preservación del nivel de amputación tanto de la extremidad superior como de la inferior, puede mejorar la función residual y el proceso de rehabilitación protésica de la misma. Ambas van a estar condicionadas por la longitud restante de la extremidad, la presencia o no de articulaciones operativas y la calidad de la cobertura del muñón. Presentamos 2 casos de amputaciones. El primero es un caso agudo de amputación traumática de extremidad superior a la altura del tercio proximal de antebrazo, que asocia avulsión cutánea circular desde el tercio medio del brazo y con articulación de codo conservada. El segundo, es la secuela de una amputación infracondílea de extremidad inferior por osteosarcoma que presenta fístulas cutáneas con drenaje supurativo por osteomielitis en el muñón tibial. En ambos pacientes realizamos cobertura con colgajo anterolateral de muslo anastomosado a la arteria radial en el caso de la extremidad superior, y a la arteria genicular descendente en la extremidad inferior. En los dos casos el postoperatorio transcurrió sin complicaciones, logrando preservar las articulaciones del codo y de la rodilla respectivamente, así como la posterior rehabilitación protésica. Consideramos que el colgajo anterolateral del muslo permite aportar tejido de buena calidad como cobertura del muñón de amputación. Dadas las características del tejido aportado y su volumen, es idóneo tanto para cobertura de defectos agudos como de déficits de almohadillado en casos crónicos.

  20. Lasers for the SILVA laser isotope separation process

    International Nuclear Information System (INIS)

    Lapierre, Y.

    1997-01-01

    The main principles of the laser isotope separation process for the production of enriched uranium at lower cost, are reviewed and the corresponding optimal laser characteristics are described. The development of the SILVA laser isotope separation process involved researches in the various domains of pump lasers, dye lasers, laser and optics systems and two test facilities for the feasibility studies which are expected for 1997

  1. Proyecto innovador: “con+ciencia”

    OpenAIRE

    Fernández Arroyo, Jorge; Rodríguez Marín, Fátima; González Medina, Sara

    2013-01-01

    En esta comunicación se expone la experiencia de observación sobre el funcionamiento del proyecto Con+ciencia en los cursos de 5º y 6º de Primaria (tercer ciclo) del centro C.E.I.P. “Príncipe de Asturias” (Sevilla) durante el mes de marzo del 2013. Nuestra participación ha buscado conocer en profundidad este proyecto, observar su aplicación real en el aula y sus implicaciones en el alumnado y el profesorado.

  2. Riego subsuperficial con aguas residuales tratadas

    OpenAIRE

    Crespi, Raúl; Camacho, Emilio; Polo, María José

    2009-01-01

    La reutilización de aguas residuales tratadas para riego por goteo subsuperficial (RGS) de cultivos extensivos, es una práctica reconocida mundialmente, siendo la obturación de emisores un serio problema en la operación de estos sistemas. Durante el ciclo agrícola 2002/03, se realizó un ensayo experimental usando dos tipos de agua: limpia (AL) y residual tratada (AR) en un sistema mixto combinando un reactor biológico con laguna de maduración y tres tipos de protectores del emisor: micro dosi...

  3. Biorremediacion de suelos contaminados con hidrocarburos

    OpenAIRE

    Ortiz, E.; Núñez, R.; Fonseca, E.; Oramas, J.; Almazán, V.; Cabranes, Y.; Miranda, A.; Barbán, O.; Martínez, C.; Díaz, Y.; Borges, G.

    2005-01-01

    En la actualidad los suelos contaminados con hidrocarburos representan el 70% del total de los eco-sistemas impactados. A partir del aislamiento, selección y conservación de bacterias marinas degra-dadoras de hidrocarburos y productoras de sustancias tensioactivas se formuló un producto denomi-nado BIOIL-FC. Este producto ha sido aplicado satisfactoriamente en derrames de hidrocarburos en el mar. En el presente trabajo fue evaluada la factibilidad del uso de los procesos de biorremediación “e...

  4. Los juegos de Borges con el tiempo

    Directory of Open Access Journals (Sweden)

    Paulína Šišmišová

    2012-12-01

    Full Text Available La preocupación por el tiempo es una de las constantes de la obra del escritor argentino Jorge Luis Borges. Los «juegos con el tiempo» forman parte indispensable de sus estrategias narrativas, tal como lo documenta también su célebre cuento «Borges y yo». En nuestra contribución nos dedicaremos a estudiar la problemática del tiempo en Borges bajo dos aspectos: el tiempo como recurso de configuración del texto narrativo y el tiempo como categoria metafísica.

  5. Tratamiento de aguas contaminadas con cianuro

    OpenAIRE

    Aguilar Roca, Fernando; Aguilar Roca, Fernando; Aguilar Roca, Fernando

    2011-01-01

    El presente trabajo “Tratamiento de aguas contaminadas con cianuro" se divide en tres partes: química del contaminante, procesos de descontaminación estudiados y un procedimiento basado en una investigación reciente. Principales propiedades físico-químicas del ion cianuro y de sus principales compuestos, cianuros simples o complejos, en medio acuoso. Métodos y procesos que existen para la descontaminación de efluentes cianurados, tanto los que se dan de forma natural (degradación natu...

  6. Las personas con discapacidad en el cine

    OpenAIRE

    Monjas, M.I.; et al.

    2005-01-01

    Una forma de comprobar cómo se conceptualiza a las personas con discapacidad es analizar la imagen que de ellas se refleja en distintos soportes como pueden ser libros, prensa y medios de comunicación. El presente trabajo se centra en el estudio de películas cuyos protagonistas tienen alguna discapacidad. A tal efecto, y después de revisar una parte de la producción cinematográfica, se han seleccionado cincuenta películas para proceder a su análisis. Los resultados obtenidos evidencian la esc...

  7. High power lasers

    CERN Document Server

    Niku-Lari, A

    1989-01-01

    The use of lasers for the working and treatment of materials is becoming increasingly common in industry. However, certain laser applications, for example, in welding, cutting and drilling, are more widely exploited than others. Whilst the potential of lasers for the surface treatment of metals is well recognised, in practice, this particular application is a relative newcomer. The 24 papers in this volume present the latest research and engineering developments in the use of lasers for processes such as surface melting, surface alloying and cladding, and machining, as well as discussing th

  8. Degenerate band edge laser

    Science.gov (United States)

    Veysi, Mehdi; Othman, Mohamed A. K.; Figotin, Alexander; Capolino, Filippo

    2018-05-01

    We propose a class of lasers based on a fourth-order exceptional point of degeneracy (EPD) referred to as the degenerate band edge (DBE). EPDs have been found in parity-time-symmetric photonic structures that require loss and/or gain; here we show that the DBE is a different kind of EPD since it occurs in periodic structures that are lossless and gainless. Because of this property, a small level of gain is sufficient to induce single-frequency lasing based on a synchronous operation of four degenerate Floquet-Bloch eigenwaves. This lasing scheme constitutes a light-matter interaction mechanism that leads also to a unique scaling law of the laser threshold with the inverse of the fifth power of the laser-cavity length. The DBE laser has the lowest lasing threshold in comparison to a regular band edge laser and to a conventional laser in cavities with the same loaded quality (Q ) factor and length. In particular, even without mirror reflectors the DBE laser exhibits a lasing threshold which is an order of magnitude lower than that of a uniform cavity laser of the same length and with very high mirror reflectivity. Importantly, this novel DBE lasing regime enforces mode selectivity and coherent single-frequency operation even for pumping rates well beyond the lasing threshold, in contrast to the multifrequency nature of conventional uniform cavity lasers.

  9. Gigashot Optical Laser Demonstrator

    Energy Technology Data Exchange (ETDEWEB)

    Deri, R. J. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

    2015-10-13

    The Gigashot Optical Laser Demonstrator (GOLD) project has demonstrated a novel optical amplifier for high energy pulsed lasers operating at high repetition rates. The amplifier stores enough pump energy to support >10 J of laser output, and employs conduction cooling for thermal management to avoid the need for expensive and bulky high-pressure helium subsystems. A prototype amplifier was fabricated, pumped with diode light at 885 nm, and characterized. Experimental results show that the amplifier provides sufficient small-signal gain and sufficiently low wavefront and birefringence impairments to prove useful in laser systems, at repetition rates up to 60 Hz.

  10. Notes on Laser Acceleration

    International Nuclear Information System (INIS)

    Tajima, T.

    2008-01-01

    This note intends to motivate our effort toward the advent of new methods of particle acceleration, utilizing the fast rising laser technology. By illustrating the underlying principles in an intuitive manner and thus less jargon-clad fashion, we seek a direction in which we shall be able to properly control and harness the promise of laser acceleration. First we review the idea behind the laser wakefield. We then go on to examine ion acceleration by laser. We examine the sheath acceleration in particular and look for the future direction that allows orderly acceleration of ions in high energies

  11. X-ray lasers

    CERN Document Server

    Elton, Raymond C

    2012-01-01

    The first in its field, this book is both an introduction to x-ray lasers and a how-to guide for specialists. It provides new entrants and others interested in the field with a comprehensive overview and describes useful examples of analysis and experiments as background and guidance for researchers undertaking new laser designs. In one succinct volume, X-Ray Lasers collects the knowledge and experience gained in two decades of x-ray laser development and conveys the exciting challenges and possibilities still to come._Add on for longer version of blurb_M>The reader is first introduced

  12. Lasers in materials processing

    International Nuclear Information System (INIS)

    Davis, J.I.; Rockower, E.B.

    1981-01-01

    A status report on the uranium Laser Isotope Separation (LIS) Program at the Lawrence Livermore National Laboratory is presented. Prior to this status report, process economic analysis is presented so as to understand how the unique properties of laser photons can be best utilized in the production of materials and components despite the high cost of laser energy. The characteristics of potential applications that are necessary for success are identified, and those factors that have up to now frustrated attempts to find commercially viable laser induced chemical and physical process for the production of new or existing materials are pointed out

  13. Mid-Infrared Lasers

    Data.gov (United States)

    National Aeronautics and Space Administration — Mid infrared solid state lasers for Differential Absorption Lidar (DIAL) systems required for understanding atmospheric chemistry are not available. This program...

  14. Laser fusion program overview

    International Nuclear Information System (INIS)

    Emmett, J.L.

    1977-01-01

    This program is structured to proceed through a series of well defined fusion milestones to proof of the scientific feasibility, of laser fusion with the Shiva Nova system. Concurrently, those key technical areas, such as advanced lasers, which are required to progress beyond proof of feasibility, are being studied. We have identified and quantified the opportunities and key technical issues in military applications, such as weapons effects simulations, and in civilian applications, such as central-station electric power production. We summarize the current status and future plans for the laser fusion program at LLL, emphasizing the civilian applications of laser fusion

  15. Physics of semiconductor lasers

    CERN Document Server

    Mroziewicz, B; Nakwaski, W

    2013-01-01

    Written for readers who have some background in solid state physics but do not necessarily possess any knowledge of semiconductor lasers, this book provides a comprehensive and concise account of fundamental semiconductor laser physics, technology and properties. The principles of operation of these lasers are therefore discussed in detail with the interrelations between their design and optical, electrical and thermal properties. The relative merits of a large number of laser structures and their parameters are described to acquaint the reader with the various aspects of the semiconductor l

  16. Principles of laser dynamics

    CERN Document Server

    Khanin, YI

    1995-01-01

    This monograph summarizes major achievements in laser dynamics over the past three decades. The book begins with two introductory Chapters. Chapter 1 offers general considerations on quantum oscillators, formulates the requirements for the laser key elements and shows how these requirements are met in different laser systems. The second Chapter proposes the mathematical models used in semiclassical laser theory, discusses the approximations and simplifications in particular cases, and specifies the range of applicability of these models. In Chapters 3-5 attention is given primarily to the stea

  17. Laser transmitter system

    International Nuclear Information System (INIS)

    Dye, R.A.

    1975-01-01

    A laser transmitter system is disclosed which utilizes mechanical energy for generating an output pulse. The laser system includes a current developing device such as a piezoelectric crystal which charges a storage device such as a capacitor in response to a mechanical input signal. The capacitor is coupled to a switching device, such as a silicon controlled rectifier (SCR). The switching device is coupled to a laser transmitter such as a GaAs laser diode, which provides an output signal in response to the capacitor being discharged

  18. Laser in urology

    International Nuclear Information System (INIS)

    Breisland, H.O.

    1991-01-01

    The neodymium YAG laser is particularly suited for endoscopic urologic surgery because the YAG laser light can be conducted in flexible fibers. Superficial bladder tumours can be treated under local anaesthesia in the outpatient department. The frequency of local recurrences is low, significantly lower than after electrosection or electrocoagulation. Selected cases of T2-muscle invasive bladder tumours can be cured with laser coagulation applied subsequently to transurethral resection. Combined treatment with electrosection and laser coagulation of localized prostatic cancer is a promising method which compares favourably with results obtained by other treatment modalities. Tumours in the upper urinary tract can be laser-treated through ureteroscopes or nephroscopes, but the treatment should be limited to low stage, low grade tumours. Laser is the treatment of choice for intraurethral condylomatas. Laser treatment of penil carcinoma gives excellent cosmetic and functional results and few local recurrences. Laser lithotripsy is a new technique for treatment of ureteric stones and photodynamic laser therapy is a promising tecnique for treatment of carcinoma in situ in the bladder empithelium. However, neither of these techniques are available for clinical use in Norway as yet. 17 refs., 3 figs., 1 tabs

  19. Tunable Microfluidic Dye Laser

    DEFF Research Database (Denmark)

    Olsen, Brian Bilenberg; Helbo, Bjarne; Kutter, Jörg Peter

    2003-01-01

    We present a tunable microfluidic dye laser fabricated in SU-8. The tunability is enabled by integrating a microfluidic diffusion mixer with an existing microfluidic dye laser design by Helbo et al. By controlling the relative flows in the mixer between a dye solution and a solvent......, the concentration of dye in the laser cavity can be adjusted, allowing the wavelength to be tuned. Wavelength tuning controlled by the dye concentration was demonstrated with macroscopic dye lasers already in 1971, but this principle only becomes practically applicable by the use of microfluidic mixing...

  20. Trends in laser micromachining

    Science.gov (United States)

    Gaebler, Frank; van Nunen, Joris; Held, Andrew

    2016-03-01

    Laser Micromachining is well established in industry. Depending on the application lasers with pulse length from μseconds to femtoseconds and wavelengths from 1064nm and its harmonics up to 5μm or 10.6μm are used. Ultrafast laser machining using pulses with pico or femtosecond duration pulses is gaining traction, as it offers very precise processing of materials with low thermal impact. Large-scale industrial ultrafast laser applications show that the market can be divided into various sub segments. One set of applications demand low power around 10W, compact footprint and are extremely sensitive to the laser price whilst still demanding 10ps or shorter laser pulses. A second set of applications are very power hungry and only become economically feasible for large scale deployments at power levels in the 100+W class. There is also a growing demand for applications requiring fs-laser pulses. In our presentation we would like to describe these sub segments by using selected applications from the automotive and electronics industry e.g. drilling of gas/diesel injection nozzles, dicing of LED substrates. We close the presentation with an outlook to micromachining applications e.g. glass cutting and foil processing with unique new CO lasers emitting 5μm laser wavelength.

  1. Scanning Color Laser Microscope

    Science.gov (United States)

    Awamura, D.; Ode, T.; Yonezawa, M.

    1988-01-01

    A confocal color laser microscope which utilizes a three color laser light source (Red: He-Ne, Green: Ar, Blue: Ar) has been developed and is finding useful applications in the semiconductor field. The color laser microscope, when compared to a conventional microscope, offers superior color separation, higher resolution, and sharper contrast. Recently some new functions including a Focus Scan Memory, a Surface Profile Measurement System, a Critical Dimension Measurement system (CD) and an Optical Beam Induced Current Function (OBIC) have been developed for the color laser microscope. This paper will discuss these new features.

  2. High Power Vanadate lasers

    CSIR Research Space (South Africa)

    Strauss

    2006-07-01

    Full Text Available stream_source_info Strauss1_2006.pdf.txt stream_content_type text/plain stream_size 3151 Content-Encoding UTF-8 stream_name Strauss1_2006.pdf.txt Content-Type text/plain; charset=UTF-8 Laser Research Institute... University of Stellenbosch www.laser-research.co.za High Power Vanadate lasers H.J.Strauss, Dr. C. Bollig, R.C. Botha, Prof. H.M. von Bergmann, Dr. J.P. Burger Aims 1) To develop new techniques to mount laser crystals, 2) compare the lasing properties...

  3. Laser adaptive holographic hydrophone

    Energy Technology Data Exchange (ETDEWEB)

    Romashko, R V; Kulchin, Yu N; Bezruk, M N; Ermolaev, S A [Institute of Automation and Control Processes, Far Eastern Branch of the Russian Academy of Sciences, Vladivostok (Russian Federation)

    2016-03-31

    A new type of a laser hydrophone based on dynamic holograms, formed in a photorefractive crystal, is proposed and studied. It is shown that the use of dynamic holograms makes it unnecessary to use complex optical schemes and systems for electronic stabilisation of the interferometer operating point. This essentially simplifies the scheme of the laser hydrophone preserving its high sensitivity, which offers the possibility to use it under a strong variation of the environment parameters. The laser adaptive holographic hydrophone implemented at present possesses the sensitivity at a level of 3.3 mV Pa{sup -1} in the frequency range from 1 to 30 kHz. (laser hydrophones)

  4. Introduction to laser technology

    CERN Document Server

    Hitz, C Breck; Hecht, Jeff

    2012-01-01

    The only introductory text on the market today that explains the underlying physics and engineering applicable to all lasersAlthough lasers are becoming increasingly important in our high-tech environment, many of the technicians and engineers who install, operate, and maintain them have had little, if any, formal training in the field of electro-optics. This can result in less efficient usage of these important tools. Introduction to Laser Technology, Fourth Edition provides readers with a good understanding of what a laser is and what it can and cannot do. The book explains what types of las.

  5. Laser-induced interactions

    International Nuclear Information System (INIS)

    Green, W.R.

    1979-01-01

    This dissertation discusses some of the new ways that lasers can be used to control the energy flow in a medium. Experimental and theoretical considerations of the laser-induced collision are discussed. The laser-induced collision is a process in which a laser is used to selectively transfer energy from a state in one atomic or molecular species to another state in a different species. The first experimental demonstration of this process is described, along with later experiments in which lasers were used to create collisional cross sections as large as 10 - 13 cm 2 . Laser-induced collisions utilizing both a dipole-dipole interaction and dipole-quadrupole interaction have been experimentally demonstrated. The theoretical aspects of other related processes such as laser-induced spin-exchange, collision induced Raman emission, and laser-induced charge transfer are discussed. Experimental systems that could be used to demonstrate these various processes are presented. An experiment which produced an inversion of the resonance line of an ion by optical pumping of the neutral atom is described. This type of scheme has been proposed as a possible method for constructing VUV and x-ray lasers

  6. Jet laser ion source

    International Nuclear Information System (INIS)

    Dem'yanov, A.V.; Sidorov, S.V.

    1994-01-01

    External laser injector of multicharged ions (MCI) is developed in which wide-aperture aberration-free wire gauze spherical shape electrodes are applied for effective MCI extraction from laser plasma and beam focusing. Axial plasma compression by solenoid magnetic field is used to reduce ion losses due to transverse movement of the scattering laser plasma. Transverse magnetic field created by another solenoid facilitates the effective laser plasma braking and consequently, leads to the narrowing of energy spectrum of plasma ions and its shift towards lower energies. 2 refs.; 3 figs

  7. Free electron laser

    International Nuclear Information System (INIS)

    Ortega, J.M.; Billardon, M.

    1986-01-01

    Operation principle of a laser and an oscillator are recalled together with the klystron one. In the free electron laser, electrons go through an undulator or an optical klystron. Principles of the last one are given. The two distinct ways of producing coherent radiation with an undulator and an optical klystron are presented. The first one is the use of the free electron laser, the second is to make use of the spontaneous emission generation (harmonics generation). The different current types of free electron lasers are presented (Stanford, Los Alamos, Aco at Orsay). Prospects and applications are given in conclusion [fr

  8. Laser cooling of solids

    CERN Document Server

    Petrushkin, S V

    2009-01-01

    Laser cooling is an important emerging technology in such areas as the cooling of semiconductors. The book examines and suggests solutions for a range of problems in the development of miniature solid-state laser refrigerators, self-cooling solid-state lasers and optical echo-processors. It begins by looking at the basic theory of laser cooling before considering such topics as self-cooling of active elements of solid-state lasers, laser cooling of solid-state information media of optical echo-processors, and problems of cooling solid-state quantum processors. Laser Cooling of Solids is an important contribution to the development of compact laser-powered cryogenic refrigerators, both for the academic community and those in the microelectronics and other industries. Provides a timely review of this promising field of research and discusses the fundamentals and theory of laser cooling Particular attention is given to the physics of cooling processes and the mathematical description of these processes Reviews p...

  9. Estudio de viabilidad de cajones marítimos con hormigón con fibras

    OpenAIRE

    Ramos Marquès, Òscar Gonçal

    2017-01-01

    En este TFM se estudia la viabilidad de sustituir la armadura pasiva por fibras metálicas o plásticas en cajones para obras portuarias. Para ello, en primer lugar, se estudia el procedimiento constructivo de un cajón y las propiedades de los hormigones con fibras. Una vez analizado el estado del conocimiento se procede a escoger un cajón representativo, ya construido con armadura pasiva. El cajón escogido es el cajón tipo 3 del dique est...

  10. Pulpotomía con electrocauterio en pacientes con hemofilia A

    OpenAIRE

    Carbonell Rodriguez, Rosario

    2017-01-01

    Rehabilita la salud oral de un niños con Hemofilia A, empleando el Electrocauterio como una alternativa en la terapia pulpar, específicamente en la pulpotomía, para lo cual se realiza un minucioso examen clínico y anamnesis, que respaldados con exámenes complementarios, permite determinar el plan de tratamiento. La rehabilitación integral se llevó a cabo, previo consentimiento informado del padre, en sala de operaciones bajo anestesia general, debido a la condición sistémica del niño. Incl...

  11. SATISFACCIÓN CON EL TRATAMIENTO EN PACIENTES DE ATENCIÓN PRIMARIA CON ARTROSIS

    Directory of Open Access Journals (Sweden)

    Carmen Llanos Val Jiménez

    2017-01-01

    Full Text Available Fundamentos: Al igual que en otros problemas crónicos, en el abor - daje del paciente con artrosis se tiende a un modelo de toma de decisiones compartidas, en el que el punto de vista del paciente debe ser considerado en la elección del tratamiento. El objetivo de este trabajo fue evaluar la sa - tisfacción con el tratamiento en pacientes diagnosticados de osteoartrosis y comprobar si existen diferencias entre diferentes opciones farmacológicas, así como determinar si existe asociación con el estado funcional y las carac - terísticas clínicas y sociodemográficas. Métodos: Se realizó un estudio observacional transversal en una muestra de 487 pacientes seleccionados mediante muestreo consecutivo. La variable principal fue el nivel de satisfacción con el tratamiento (cuestionario ARTS. El estado funcional de los pacientes fue evaluado mediante la escala WO - MAC. Otras variables fueron: características del tratamiento, adherencia te - rapéutica, eventos adversos, y variables clínicas y sociodemográficas. Resultados: En el cuestionario ARTS los pacientes, en un rango entre 28 y 87, obtuvieron una puntuación media de 65,3 (DE: 9,9. La puntuación no fue significativamente diferente en consumidores de 1, 2 o más fármacos. Entre quienes consumían un solo fármaco, no hubo diferencias entre los di - ferentes tipos de fármacos. En el estado funcional se obtuvo una puntuación media de 30,2 puntos (DE: 20,8 y se observó una débil correlación negativa con el nivel de satisfacción (r= - 0,252; p<0,001. Mediante regresión lineal múltiple, se observó mayor puntuación en la escala ARTS (p<0,05 en pa - cientes con menor puntuación en la escala WOMAC, mayor edad y ausencia de eventos adversos. Conclusión : En pacientes con osteoartritis se observa un nivel mode - rado de satisfacción con el tratamiento farmacológico, condicionado por su situación funcional, sus características sociodemográficas y por la presencia de eventos

  12. Síndrome disejecutivo en personas con dependencia alcohólica con/sin recidivas

    OpenAIRE

    Fidalgo Martínez, Eva

    2015-01-01

    [ES]En la mayoría de las culturas el alcohol es el depresor del SNC utilizado con más frecuencia y el responsable de una morbilidad y una mortalidad considerables. En la actualidad, el consumo de bebidas alcohólicas constituye un importante problema de salud pública, especialmente en España, que es uno de los países con mayor consumo de alcohol por habitante y año. El objetivo general del estudio es determinar la existencia de diferencias significativas entre dos grupos clínicos de sujetos...

  13. Intervención con menores con adicciones desde Proyecto Hombre

    OpenAIRE

    Pardo-Esteban, Belén; Escalza-González, Amaia

    2015-01-01

    En el citado seminario informaremos del programa de atención y prevención de las toxicomanías y otras adicciones, llevado a cabo por la Asociación Proyecto hombre. A continuación, trataremos la formación en adicciones y toxicomanía con los estudiantes, mediante charla, cuestionarios sobre conocimientos básicos en prevención de toxicomanía en menores y los diferentes programas de intervención posibles aducados a los perfiles de los usuarios. Terminaremos con un debate sobre los temas tra...

  14. Laser beam diagnostics for kilowatt power pulsed YAG laser

    International Nuclear Information System (INIS)

    Liu, Yi; Leong, Keng H.

    1992-01-01

    There is a growing need for high power YAG laser beam diagnostics with the recent introduction of such lasers in laser material processing. In this paper, we will describe the use of a commercially available laser beam analyzer (Prometec) to profile the laser beam from a 1600 W pulsed Nd:YAG laser that has a 1 mm fiber optic beam delivery system. The selection of laser pulse frequency and pulse width for the measurement is discussed. Laser beam propagation parameters by various optical components such as fibers and lenses can be determined from measurements using this device. The importance of such measurements will be discussed

  15. Laser Program annual report 1987

    Energy Technology Data Exchange (ETDEWEB)

    O' Neal, E.M.; Murphy, P.W.; Canada, J.A.; Kirvel, R.D.; Peck, T.; Price, M.E.; Prono, J.K.; Reid, S.G.; Wallerstein, L.; Wright, T.W. (eds.)

    1989-07-01

    This report discusses the following topics: target design and experiments; target materials development; laboratory x-ray lasers; laser science and technology; high-average-power solid state lasers; and ICF applications studies.

  16. Laser Program annual report 1987

    International Nuclear Information System (INIS)

    O'Neal, E.M.; Murphy, P.W.; Canada, J.A.; Kirvel, R.D.; Peck, T.; Price, M.E.; Prono, J.K.; Reid, S.G.; Wallerstein, L.; Wright, T.W.

    1989-07-01

    This report discusses the following topics: target design and experiments; target materials development; laboratory x-ray lasers; laser science and technology; high-average-power solid state lasers; and ICF applications studies

  17. Temperature controller of semiconductor laser

    Czech Academy of Sciences Publication Activity Database

    Matoušek, Vít; Číp, Ondřej

    2003-01-01

    Roč. 73, č. 3 (2003), s. 10 - 12 ISSN 0928-5008 Institutional research plan: CEZ:AV0Z2065902 Keywords : temperature controller * semiconductor laser * laser diode Subject RIV: BH - Optics, Masers, Lasers

  18. LASERS: A cryogenic slab CO laser

    Science.gov (United States)

    Ionin, Andrei A.; Kozlov, A. Yu; Seleznev, L. V.; Sinitsyn, D. V.

    2009-03-01

    A compact capacitive transverse RF-discharge-pumped slab CO laser with cryogenically cooled electrodes, which operates both in the cw and repetitively pulsed regimes, is fabricated. The laser operation is studied in the free running multifrequency regime at the vibrational - rotational transitions of the fundamental (V + 1 → V) vibrational bands of the CO molecule in the spectral region from 5.1 to 5.4 μm. Optimal operation conditions (gas mixture composition and pressure, RF pump parameters) are determined. It is shown that only gas mixtures with a high content of oxygen (up to 20% with respect to the concentration of CO molecules) can be used as an active medium of this laser. It is demonstrated that repetitively pulsed pumping is more efficient compared to cw pumping. In this case, quasi-cw lasing regime can be obtained. The maximum average output power of ~12 W was obtained for this laser operating on fundamental bands and its efficiency achieved ~14 %. The frequency-selective operation regime of the slab RF-discharge-pumped CO laser was realised at ~ 100 laser lines in the spectral region from 5.0 to 6.5 μm with the average output power of up to several tens of milliwatts in each line. Lasing at the transitions of the first vibrational overtone (V + 2 → V) of the CO molecule is obtained in the spectral region from 2.5 to 3.9 μm. The average output power of the overtone laser achieved 0.3 W. All the results were obtained without the forced gas mixture exchange in the discharge chamber. Under fixed experimental conditions, repetitively pulsed lasing (with fluctuations of the output characteristics no more than ±10 %) was stable for more than an hour.

  19. PREDICCION DE PROPIEDADES DE MEZCLAS GASOLINA-ETANOL MEDIANTE ESPECTROSCOPIA DE INFRARROJO

    Directory of Open Access Journals (Sweden)

    Felipe Sánchez-Minero

    2013-01-01

    Full Text Available The effect of ethanol in the gasoline reformulation was studied by infrared spectroscopy (IR. Six samples with different ethanol content were prepared (0, 20, 40, 60, 80 and 100 volume percent. IR spectra of these blends were achieved in the region from 4000 to 850 cm -1. Then, a characteristic factor of ethanol (F CO was obtained. This factor relates the area under the curve at 1050 cm -1 and the total area of the spectrum. The FCO factor was used to propose models for the prediction of properties of gasoline-ethanol blends as octane number, heat value and vapor pressure. In general, results shows a high degree of adjustment for the proposed models (R 2>0.98 with residual values for octane number, heat value and vapor pressure of -0.92/+0.75 octanes, -87.4/+107.6 Kcal/Kg and -2.67/+3.09 KPa, respectively.

  20. Experimentos en Antioquia con Fertilizantes para Papa.

    Directory of Open Access Journals (Sweden)

    Yepes Y. Emilio

    1949-03-01

    Full Text Available Con el fin de determinar la adecuada aplicación de cal. y la economía de la adición de Nitrógeno, Fósforo y Potasio, se realizaron varios experimentos de fertilizantes para papa en dos regiones productoras de Antioquia. Los experimentos se realizaron por el sistema de "Parcelas divididas y del análisis estadístico de los resultados pueden sacarse las siguientes conclusiones: 1. Es notable la deficiencia de Fósforo en ambos suelos, y hubo respuesta significativa a una aplicación de 120 kilos por hectárea. 2. Los suelos responden a una aplicación moderada de Nitrógeno y Potasio, pero puede lograrse una economía importante en las cantidades de estos elementos. 3. Parece que la aplicación de dos toneladas de cal por cuadra es suficiente, y no hay razón para aconsejar cantidades mayores. 4. Los resultados obtenidos demuestran que sí es posible la experimentación con fertilizante para papa, y sería de desear que se ampliara la experimentación en las demás regiones productoras.

  1. Polimiositis con incapacidad ventilatoria e insuficiencia respiratoria

    Directory of Open Access Journals (Sweden)

    O. Lopez Gaston

    2003-10-01

    Full Text Available Las miopatías inflamatorias son un grupo de enfermedades caracterizadas por debilidad muscular proximal y las causas mayores incluyen la polimiositis (PM, dermatomiositis y miositis por cuerpos de inclusión. Las complicaciones respiratorias son comunes y adquieren importancia por la incidencia sobre el pronóstico. Las tres formas de compromiso frecuentes son la enfermedad pulmonar intersticial, la neumopatía aspirativa y la incapacidad ventilatoria (IV por debilidad de los músculos respiratorios, que en su forma severa es de ocurrencia excepcional. Se presenta una paciente con IV sin compromiso del parénquima pulmonar, que requirió asistencia respiratoria mecánica por 4 meses con «destete» exitoso.The inflammatory diseases of muscle are a group of disorders characterized by proximal muscle weakness. Most cases fall into three major diagnostic categories, polymyositis (PM, dermatomyositis and inclusion body myositis. Respiratory complications are a common feature and are an important cause of morbidity and mortality. The three main types of pulmonary involvement are interstitial lung disease, aspiration pneumonia and ventilatory incapacity (VI due to muscle weakness. There are few reported cases in which mechanical ventilation has been used in patients with PM and VI in absense of lung disease. We present a patient with PM and VI due to muscle weakness who underwent therapy maintenance with mechanical ventilator and was weaned 4 months later.

  2. Optimización con Solver

    Directory of Open Access Journals (Sweden)

    Sánchez Álvarez , I.

    1998-01-01

    Full Text Available La relevancia de los problemas de optimización en el mundo empresarial ha generado la introducción de herramientas de optimización cada vez más sofisticadas en las últimas versiones de las hojas de cálculo de utilización generalizada. Estas utilidades, conocidas habitualmente como «solvers», constituyen una alternativa a los programas especializados de optimización cuando no se trata de problemas de gran escala, presentado la ventaja de su facilidad de uso y de comunicación con el usuario final. Frontline Systems Inc es la empresa que desarrolla el «solver» de Excel, si bien existen asimismo versiones para Lotus y Quattro Pro con ligeras diferencias de uso. En su dirección de internet (www.frontsys.com se puede obtener información técnica sobre las diferentes versiones de dicha utilidad y diversos aspectos operativos del programa, algunos de los cuales se comentan en este trabajo.

  3. con enfermedad crónica

    Directory of Open Access Journals (Sweden)

    María del Refugio Zavala Rodríguez

    2007-01-01

    Full Text Available El propósito del estudio fue determinar el grado de correlación entre los niveles de fortaleza para la salud y de ansiedad-rasgo, en unamuestra de 200 pacientes integrada por medio de muestreo no probabilístico; los criterios de inclusión fueron: adultos de ambos génerosdiagnosticados con enfermedad crónica, con estudios de enseñanza básica y orientada. El marco teórico que guió la investigación es elModelo de Adaptación de Roy. El diseño fue descriptivo, transversal, correlacional. Se utilizó el cuestionario de fortaleza de S. Pollock y laescala de autoevaluación de ansiedad-rasgo de Spielberger; los instrumentos presentaron una consistencia interna aceptable con unAlpha de Cronbach de ,852 y ,813 respectivamente. La información se recabó de cuatro instituciones de salud ubicadas en los municipiosde Tampico-Cd. Madero Tamaulipas, México. El análisis de los datos se efectuó mediante estadística descriptiva e inferencial, se utilizó elpaquete estadístico SPSS versión 13. El rango de edad que predominó fue de 45 a 64 años (54%; el 55% fue del sexo femenino, el 48%cuenta con estudios de primaria, cerca del 90% padece de una enfermedad metabólica. El coeficiente de correlación de Spearman entrela fortaleza para la salud y la ansiedad-rasgo fue significativo (Œ,570, valor Œp,000. En la mayoría de la población participante se encontróun nivel moderado tanto de fortaleza (83% como de ansiedad (73%. El análisis de regresión múltiple indicó que la relación significativaentre estas dos variables no es afectada por la edad, el género o los años de evolución de la enfermedad crónica. Los datos de este estudiomuestran evidencia de que en los pacientes con enfermedades crónicas a mayor nivel de fortaleza menor nivel de ansiedad-rasgo. Estasituación invita a desarrollar más estudios de estos fenómenos, en la disciplina de enfermería, que sirvan como sustento teórico-prácticopara el diseño o la mejora de

  4. Power balancing of multibeam laser fusion lasers

    International Nuclear Information System (INIS)

    Seka, W.; Morse, S.; Letzring, S.; Kremens, R.; Kessler, T.J.; Jaanimagi, P.; Keck, R.; Verdon, C.; Brown, D.

    1989-01-01

    The success of laser fusion depends to a good degree on the ability to compress the target to very high densities of ≥1000 times liquid DT. To achieve such compressions require that the irradiation nonuniformity must not exceed ∼1% rms over the whole time of the compression, particularly during the early phases of irradiation. The stringent requirements for the irradiation uniformity for laser fusion have been known for quite some time but until recently the energy balance was mistakenly equated to power balance. The authors describe their effort on energy balance and irradiation patterns on the target. They significantly improved the laser performance with respect to overall intensity distributions on target including the implementation of distributed (random) phase plates in each high power beam. However, the slightly varying performance of the third harmonic conversion crystals in the twenty-four beams of their laser system was generally compensated for by appropriately adjusted 1.054μm input laser energy. Computational analysis of the results of the recent high density campaign are shown

  5. Laser Stabilization with Laser Cooled Strontium

    DEFF Research Database (Denmark)

    Christensen, Bjarke Takashi Røjle

    The frequency stability of current state-of-the-art stabilized clock lasers are limited by thermal fluctuations of the ultra-stable optical reference cavities used for their frequency stabilization. In this work, we study the possibilities for surpassing this thermal limit by exploiting the nonli......The frequency stability of current state-of-the-art stabilized clock lasers are limited by thermal fluctuations of the ultra-stable optical reference cavities used for their frequency stabilization. In this work, we study the possibilities for surpassing this thermal limit by exploiting...... the nonlinear effects from coupling of an optical cavity to laser cooled atoms having a narrow transition linewidth. Here, we have realized such a system where a thermal sample of laser cooled strontium-88 atoms are coupled to an optical cavity. The strontium-88 atoms were probed on the narrow 1S0-3P1 inter......-combination line at 689 nm in a strongly saturated regime. The dynamics of the atomic induced phase shift and absorption of the probe light were experimentally studied in details with the purpose of applications to laser stabilization. The atomic sample temperature was in the mK range which brought this system out...

  6. High-power pulsed lasers

    International Nuclear Information System (INIS)

    Holzrichter, J.F.

    1980-01-01

    The ideas that led to the successful construction and operation of large multibeam fusion lasers at the Lawrence Livermore Laboratory are reviewed. These lasers are based on the use of Nd:glass laser materials. However, most of the concepts are applicable to any laser being designed for fusion experimentation. This report is a summary of lectures given by the author at the 20th Scottish University Summer School in Physics, on Laser Plasma Interaction. This report includes basic concepts of the laser plasma system, a discussion of lasers that are useful for short-pulse, high-power operation, laser design constraints, optical diagnostics, and system organization

  7. Laser safety tools and training

    CERN Document Server

    Barat, Ken

    2008-01-01

    Lasers perform many unique functions in a plethora of applications, but there are many inherent risks with this continually burgeoning technology. Laser Safety: Tools and Training presents simple, effective ways for users in a variety of facilities to evaluate the hazards of any laser procedure and ensure they are following documented laser safety standards.Designed for use as either a stand-alone volume or a supplement to Laser Safety Management, this text includes fundamental laser and laser safety information and critical laser use information rarely found in a single source. The first lase

  8. Laser-induced synlabia, cryptomenorrhea, and urine retention: A case report and literature review

    Directory of Open Access Journals (Sweden)

    Thoraya Fadul-Elahi

    2017-01-01

    Full Text Available Cosmetic laser use has many pros and cons. The worldwide use of laser for body hair removal has led to many medical complications. Unsupervised use of the laser for hair removal in vulva may result in many problems and can merely damage the vulva, although rarely, affecting the body image. This rare and novel case report is a 21 year old virgin who presented with acute urinary retention and cryptomenorrhea due to complete synlabia secondary to unsupervised vulval laser hair removal. The urinary retention was relieved by suprapubic catheterization initially. During examination under anesthesia, the fused labia were separated by a surgical incision with drainage of hematocolpos and then, a Foley's urethral catheter was inserted. She had an uneventful recovery. We report this case to emphasize on the supervised use of laser by trained and qualified personnel for hair removal in vulva to minimize its complications.

  9. Reducción de color con cloruro de magnesio en soluciones con colorantes comerciales

    Directory of Open Access Journals (Sweden)

    Mercedes Lucero Chávez

    2017-01-01

    Full Text Available Se experimentó con diferentes concentraciones de cloruro de magnesio (MgCl2 como coagulante para reducir el color en soluciones con colorantes comerciales: negro, azul y café. Los parámetros analizados fueron pH, color, demanda química de oxígeno ( dqo y sólidos suspendidos totales (sst de acuerdo con las Normas Mexicanas. Como prueba complementaria se agregó carbón activado a las muestras para reducir el color residual después de la coagulación-floculación. La reducción de los valores de color y dqo fue mayor cuando se adicionó más cantidad de MgCl2 (1.8 g/L. Los porcentajes de reducción fueron ≥90% para el color y >50% para la dqo. Los sst aumentaron con la adición de MgCl2. El carbón activado eliminó el color residual.

  10. Queratitis ulcerativa periférica bilateral en paciente con artritis reumatoide: tratamiento con infliximab

    Directory of Open Access Journals (Sweden)

    Vicente Aldasoro-Cáceres

    2017-01-01

    Discusión: La PUK es una enfermedad rara, pero a tener en cuenta en los pacientes con AR. En la mayoría de los casos, el tratamiento de fondo debe ser intensificado; en este sentido deben considerarse los tratamientos biológicos por su eficacia y efecto rápido de acción.

  11. ESTUDIO DE LA DIGESTION HUMANA CON ALUMNOS CON DIFICULTADES DE APRENDIZAJE

    Directory of Open Access Journals (Sweden)

    Mª Begoña Carretero Gómez

    2009-01-01

    Full Text Available En esta experiencia se han seleccionado una serie de actividades relacionadas con la digestión con el fin de lograr una reestructuración de ideas y cambios conceptuales, y así con la conseguir que el alumnado aprenda a construir sus propios conocimientos acerca de cómo y donde se dan los procesos de digestión necesarios para la nutrición del organismo. El trabajo se ha llevado a cabo con alumnos de 3º de Educación Secundaria Obligatoria, pertenecientesal programa de diversificación curricular. Hemos querido hacer la ciencia más cercana para que comprendan que algunos procesos tienen su explicación científica y que la ciencia forma parte de nuestro día a día, fomentando el interés del estudiante así como su implicación en el proceso de enseñanza-aprendizaje. Por ello hemos trabajado a base de pequeñas investigaciones, donde es el alumno el que marca su ritmo de trabajo, investiga y hace sus aportaciones. Han aprendido a trabajar de una forma meticulosa donde el rigor esfundamental, contagiándose del afán investigador de manera que al realizar las experiencias se han aproximado al trabajo científico a la vez que aclaran y reestructuran conocimientos.

  12. FORTIFICACIÓN DE PULPA DE UCHUVA CON CALCIO, OLIGOFRUCTOSA Y VITAMINA C, ESTABILIZADA CON HIDROCOLOIDE

    Directory of Open Access Journals (Sweden)

    ALBA LUCIA DUQUE

    2014-06-01

    Full Text Available La pulpa de uchuva fortificada con calcio, oligofructosa y vitamina C es un alimento funcional con grandes beneficios para la salud. Para ello se le adicionó componentes biológicamente activos, como ácidos grasos, fibra alimentaria y antioxidantes. En este trabajo se estudió la estabilidad de la pulpa enriquecida en diferentes formulaciones, teniendo en cuenta los criterios de incorporación de calcio y vitamina C (20% del valor diario recomendado VDR y para la oligofructosa (fibra dietaría en relación 1:1 con el calcio. Los resultados obtenidos mostraron que la pulpa de uchuva fortificada con CMC, ologofructosa, calcio y vitamina C presentó en promedio una estabilidad de 87,7±10,0; una viscosidad de 22,8±7,9; una aw de 0,9863±0; pH de 3,3±0,1; acidez de 1,6±0,1; grados Brix de 13,3±0,7; una densidad de 1,32±0 g/mL y las mejores respuestas sensoriales en cuanto a color, aroma, fluidez y sabor.

  13. Terapia regenerativa con plasma rico en plaquetas en pacientes con quemaduras

    Directory of Open Access Journals (Sweden)

    María del Carmen Franco Mora

    2015-10-01

    Full Text Available Se realizó un estudio comparativo, longitudinal y prospectivo de 60 adultos con quemaduras profundas, atendidos en el Hospital General docente "Dr. Juan Bruno Zayas Alfonso" de Santiago de Cuba, desde febrero de 2013 hasta igual mes de 2014, para evaluar la efectividad de la terapia regenerativa con plasma rico en plaquetas para la cicatrización de estas lesiones. La muestra fue dividida en 2 grupos de 30 integrantes cada uno: a los del primero se les aplicó plasma rico en plaquetas y a los del segundo sulfadiazina de plata. Se utilizaron las frecuencias absolutas y el porcentaje como medidas de resumen para variables cualitativos, así como la media aritmética y la desviación estándar para las cuantitativas. Con el proceder aplicado la cicatrización se completó en un tiempo menor, de manera que se demostró la efectividad de esta alternativa terapéutica en relación con el tratamiento convencional

  14. Efectos del contacto piel con piel del recién nacido con su madre

    Directory of Open Access Journals (Sweden)

    Camila Lucchini Raies

    Full Text Available Antecedentes: el contacto piel con piel ha sido una práctica ancestral en toda cultura, que debido a la institucionalización de la atención del parto, disminuyó en occidente. Se retomó en el marco de la atención humanizada del parto. Objetivo principal: determinar los efectos del contacto piel con piel del recién nacido con su madre. Metodología: revisión bibliográfica de 26 estudios. Límites de búsqueda: new borns, humans, clinical trials, de 10 años de publicación, en bases de datos: Pubmed, ProQuest, CINHAL, Lilacs. Resultados principales: Se observaron beneficios en las variables: duración de lactancia materna, comportamiento neurosensorial, regulación de temperatura, como alternativa al cuidado estándar, disminución en días hospitalización y niveles de cortisol, favorecedor de la interacción madre-hijo y desarrollo infantil. Conclusión principal: el contacto piel con piel brinda múltiples beneficios a recién nacidos. Se presenta como alternativa de cuidado segura, factible de implementar.

  15. Estabilidad a la congelación descongelación de emulsiones o/w preparadas con aislados de soja nativos y desnaturalizados con diferente solubilidad

    Directory of Open Access Journals (Sweden)

    Gonzalo Palazolo

    2011-05-01

    Full Text Available En este trabajo se evaluó la estabilidad a la congelación de emulsiones modelo aceite en agua (o/w preparadas con cuatro aislados de soja: dos nativos (ASN-1 y ASN-2, de similar composición pero diferente solubilidad, >90% y ~75%, respectivamente y dos desnaturalizados (ASD-1 y ASD-2, resultantes de calentar los respectivos aislados nativos (90 ‹C, 5 minutos. Las emulsiones preparadas con dispersiones acuosas al 2% p/v de ASN o ASD y aceite de girasol refinado (ƒ³ =0,25, se congelaron a -20 ‹C por 24 horas y luego se descongelaron a 20 ‹C. La estabilidad se evaluo a partir de medidas de distribución de tamano de partícula (difraccion laser y aceite liberado (AL, metodo de dilucion del colorante. Las emulsiones preparadas con ASN-2 y ASD-2 resultaron muy inestables despues de ser congeladas y descongeladas, resultadoque se evidenció por el aumento del tamano de partícula y un AL>25%. Al usar el aislado ASN-1 de mayor solubilidad, las emulsiones fueron mas estables y se observó un marcado incremento de la estabilidad cuando sus proteínas eran desnaturalizadas (ASD-1, no observándose prácticamente coalescencia ni aceite separado. En conclusión, la solubilidad y la desnaturalización proteíca de los aislados de soja son factores decisivos en la estabilidad de emulsiones frente a la congelación-descongelación.

  16. Laser biostimulation in pediatrics

    Science.gov (United States)

    Utz, Irina A.; Lagutina, L. E.; Tuchin, Valery V.

    1995-01-01

    In the present paper the method and apparatus for percutaneous laser irradiation of blood (PLIB) in vessels (veins) are described. Results of clinical investigations of biostimulating effects under PLIB by red laser light (633 nm) in Cubiti and Saphena Magna veins are presented.

  17. Metallic DFB lasers

    NARCIS (Netherlands)

    Marell, M.J.H.; Nötzel, R.; Smit, M.K.; Hill, M.T.; Pozo, J.; Mortensen, M.; Urbach, P.; Leijtens, X.; Yousefi, M.

    2010-01-01

    In this paper we present our latest results on the design, fabrication and characterization of metal coated DFB lasers. These devices are based on a specialform of the metal-insulator-metal waveguides, which support plasmon gap modes. The distributed feedback provides control over the laser ~

  18. Laser processing of materials

    Indian Academy of Sciences (India)

    M. Senthilkumar (Newgen Imaging) 1461 1996 Oct 15 13:05:22

    The initial foundation of laser theory was laid by Einstein [11]. ..... general definition and scope of the processes as understood in conventional practice, but is ..... [54]. Laser welding of Ti-alloys. Welding. 2001 TiNi shape memory alloys. CW–CO2. Study corrosion, mechanical and shape memory properties of weldments.

  19. Microfluidic Dye Lasers

    DEFF Research Database (Denmark)

    Kristensen, Anders; Balslev, Søren; Gersborg-Hansen, Morten

    2006-01-01

    A technology for miniaturized, polymer based lasers, suitable for integration with planar waveguides and microfluidic networks is presented. The microfluidic dye laser device consists of a microfluidic channel with an embedded optical resonator. The devices are fabricated in a thin polymer film...

  20. Laser trabeculotomy versus trabeculoplasty

    International Nuclear Information System (INIS)

    Ticho, U.; Frucht, J.

    1984-01-01

    Although laser trabeculotomy has failed in glaucoma management, the laser trabeculoplasty (LTP) procedure has proved to be helpful. LTP was found to improve glaucoma control in 80-90% of open angle glaucoma patients, and less in secondary glaucoma and low tension glaucoma (50%). The procedure is more successful in dark iris eyes and complications are transient. (Auth.)

  1. 5. Laser plasma interaction

    International Nuclear Information System (INIS)

    Labaune, C.; Fuchs, J.; Bandulet, H.

    2002-01-01

    Imprint elimination, smoothing and preheat control are considerable problems in inertial fusion and their possible solution can be achieved by using low-density porous materials as a buffer in target design. The articles gathered in this document present various aspects of the laser-plasma interaction, among which we have noticed: -) numerical algorithmic improvements of the Vlasov solver toward the simulation of the laser-plasma interaction are proposed, -) the dependence of radiation temperatures and X-ray conversion efficiencies of hohlraum on the target structures and laser irradiation conditions are investigated, -) a study of laser interaction with ultra low-density (0,5 - 20 mg/cm 3 ) porous media analyzing backscattered light at incident laser frequency ω 0 and its harmonics 3*ω 0 /2 and 2*ω 0 is presented, -) investigations of laser interaction with solid targets and crater formation are carried out with the objective to determine the ablation loading efficiency, -) a self organization in an intense laser-driven plasma and the measure of the relative degree of order of the states in an open system based on the S-theorem are investigated, and -) the existence and stability of electromagnetic solitons generated in a relativistic interaction of an intense laser light with uniform under-dense cold plasma are studied

  2. Laser Interference Lithography

    NARCIS (Netherlands)

    van Wolferen, Hendricus A.G.M.; Abelmann, Leon; Hennessy, Theodore C.

    In this chapter we explain how submicron gratings can be prepared by Laser Interference Lithography (LIL). In this maskless lithography technique, the standing wave pattern that exists at the intersection of two coherent laser beams is used to expose a photosensitive layer. We show how to build the

  3. Levitated droplet dye laser

    DEFF Research Database (Denmark)

    Azzouz, H.; Alkafadiji, L.; Balslev, Søren

    2006-01-01

    a high quality optical resonator. Our 750 nL lasing droplets consist of Rhodamine 6G dissolved in ethylene glycol, at a concentration of 0.02 M. The droplets are optically pumped at 532 nm light from a pulsed, frequency doubled Nd:YAG laser, and the dye laser emission is analyzed by a fixed grating...

  4. Laser induced energy transfer

    International Nuclear Information System (INIS)

    Falcone, R.W.

    1979-01-01

    Two related methods of rapidly transferring stored energy from one excited chemical species to another are described. The first of these, called a laser induced collision, involves a reaction in which the energy balance is met by photons from an intense laser beam. A collision cross section of ca 10 - 17 cm 2 was induced in an experiment which demonstrated the predicted dependence of the cross section on wavelength and power density of the applied laser. A second type of laser induced energy transfer involves the inelastic scattering of laser radiation from energetically excited atoms, and subsequent absorption of the scattered light by a second species. The technique of producing the light, ''anti-Stokes Raman'' scattering of visible and infrared wavelength laser photons, is shown to be an efficient source of narrow bandwidth, high brightness, tunable radiation at vacuum ultraviolet wavelengths by using it to excite a rare gas transition at 583.7 A. In addition, this light source was used to make the first measurement of the isotopic shift of the helium metastable level at 601 A. Applications in laser controlled chemistry and spectroscopy, and proposals for new types of lasers using these two energy transfer methods are discussed

  5. Coaxial short pulsed laser

    Science.gov (United States)

    Nelson, M.A.; Davies, T.J.

    1975-08-01

    This invention relates to a laser system of rugged design suitable for use in a field environment. The laser itself is of coaxial design with a solid potting material filling the space between components. A reservoir is employed to provide a gas lasing medium between an electrode pair, each of which is connected to one of the coaxial conductors. (auth)

  6. LASER EN LARYNGOLOGIE

    African Journals Online (AJOL)

    9 mai 2013 ... permettant selon les besoins, coagulation, section ou vaporisation. ... tés par laser au service d'ORL et de chirurgie cervico-. LASER EN .... nose était de siège glottique pur à type de palmure dans. 3 cas et supra glottique ...

  7. Lasers in nuclear physics

    International Nuclear Information System (INIS)

    Inamura, T.T.

    1988-01-01

    The hyperfine interaction has been reviewed from a point of view of nuclear physics. Recent progress of nuclear spectroscopy with lasers is presented as one of laser studies of fundamental physics currently pursued in Japan. Especially, the hyperfine anomaly is discussed in connection with the origin of nuclear magnetism. (author)

  8. for aqueous dye lasers

    Indian Academy of Sciences (India)

    2014-02-12

    Feb 12, 2014 ... inclusion complex of RhB with the container molecule cucurbit[7]uril (CB[7]). Keywords. Temperature-dependent fluorescence; Rhodamine B; cucurbit[7]uril; host–guest complex; dye laser. PACS Nos 36.20.kd; 83.60.pq; 87.64.kv. 1. Introduction. Rhodamine B (RhB) is an efficient and photostable laser dye ...

  9. Electrodeless excimer laser

    International Nuclear Information System (INIS)

    Lisi, N.

    2001-01-01

    In this paper it is proposed how to build an excimer laser based on an electrodeless discharge (or Dielectric Barrier Discharge). Such laser could operate with a low energy per pulse ( 2 excimer molecule, whose emission wavelength in the VUV range (157 nm) at high reprate is particularly interesting in the micro-lithography field [it

  10. Estudio observacional prospectivo con insulina detemir en pacientes con diabetes mellitus tipo 2 mal controlados que inician por primer vez tratamiento con insulina (estudio SOLVE

    Directory of Open Access Journals (Sweden)

    Domingo Orozco-Beltrán

    2016-02-01

    Conclusiones: En esta cohorte de pacientes con diabetes mellitus tipo 2 recientemente insulinizados, la insulina detemir (una vez al día mejoró el control glucémico, con baja incidencia de hipoglucemia y una reducción significativa del peso.

  11. BIOMASA Y RENDIMIENTO DE FRIJOL CON POTENCIAL EJOTERO EN UNICULTIVO Y ASOCIADO CON GIRASOL

    Directory of Open Access Journals (Sweden)

    J. Garduño-González

    2009-01-01

    Full Text Available El objetivo del presente estudio fue estimar la producción de biomasa, rendimiento y algunos de sus componentes de dos cultivares de frijol (Phaseolus vulgaris L. con potencial ejotero ('Acerado' y 'Criollo', en unicultivo y asociado con dos cultivares de girasol (Helianthus annuus L. ('Sunbright' y 'Victoria'. El estudio se realizó durante el ciclo primavera verano 2006 bajo condiciones de temporal en Tenancingo, Méx. Las variables evaluadas fueron: índice de área foliar (IAF, tasa de asimilación neta (TAN, biomasa total (BT, diámetro de vaina (DV, longitud de vaina (LV, número de vainas·m-2 (NV y rendimiento de vaina·m-2 (RV; las cuales fueron analizadas en arreglo factorial, bajo un diseño de bloques completos al azar con cuatro repeticiones. Para estimar el grado de asociación, entre las variables estudiadas y el rendimiento de vainas, se realizó un análisis de correlación lineal simple. En el factor cultivares se detectaron diferencias estadísticas significativas para la TAN y DV; para el factor sistemas de siembra hubo diferencias significativas para BT, DV, NV y RV. La interacción cultivares * sistema de siembra fue significativa en todas las variables, excepto en la TAN. En ese sentido, las asociaciones 'Criollo' + 'Sunbright', 'Acerado' + 'Victoria' y 'Acerado' en unicultivo, presentaron el mayor RV. Las variables IAF, BT y NV se correlacionaron positiva y significativamente con el rendimiento de vaina. Los resultados indican que 'Criollo' y 'Acerado', asociados con 'Sunbright' y 'Victoria', respectivamente, responden positivamente a la asociación, constituyendo una buena opción para los productores de la región de Tenancingo, México.

  12. Incidencia y factores asociados con las reacciones adversas del tratamiento antirretroviral inicial en pacientes con VIH

    Directory of Open Access Journals (Sweden)

    Juan Astuvilca

    2007-07-01

    Full Text Available La alta incidencia de reacciones adversas medicamentosas (RAMA al tratamiento antirretroviral de gran actividad (TARGA en pacientes con VIH/SIDA puede afectar la calidad de vida y adherencia al tratamiento. Objetivos: Determinar la incidencia de RAMA del TARGA inicial e identificar los factores asociados con la ocurrencia de RAMA al recibir dicha terapia. Materiales y métodos: Se realizó un estudio de cohorte histórica con todos los pacientes VIH (+ mayores de 18 años que recibieron TARGA por primera vez en el Hospital Nacional Arzobispo Loayza, con un seguimiento de 360 días desde la primera prescripción. Se recabó las RAMA de las historias clínicas y tarjetas de control. Resultados: Se incluyeron 353 pacientes, se encontró una incidencia acumulada de 66,7% de efectos adversos al TARGA inicial y una densidad de incidencia de 9,1 eventos de RAMA por 10 personas año de seguimiento (IC95%: 8,1-10,1. Anemia (23,4%, náuseas (20,6% y rash (17,2% fueron las RAMA más frecuentes. El uso de drogas (OR 2,40; IC95% 1,01-5,67; consumo de alcohol (OR 0.32; IC95%: 0,19-0,55 y estadio SIDA (OR 0,20; IC95%: 0,04-0,95 estuvieron asociadas con la presencia de RAMA. Conclusiones: Existe un alta incidencia de RAMA, siendo la anemia la más frecuente. El uso de drogas es un factor de riesgo para presentar RAMA.

  13. Hidroxilación de fenol con catalizadores ZSM-5 modificado con cobre

    Directory of Open Access Journals (Sweden)

    César Augusto Caro

    2005-01-01

    Full Text Available Se sintetizaron varios catalizadores Cu-ZSM-5 con diferentes relaciones Si/Al y Si/Cu. Usando metilamina o hidróxido de sodio como agente mineralizante. Los catalizadores se caracterizaron por DRX, IR, análisis BET, UV-VIS y análisis elemental. El desempeño catalítico de los catalizadores sintetizados se evaluó en la hidroxilación de fenol con H2O2. Se encontró que la relación catecol (CAT/(hidroquinona (HQ + p-benzoquinona (PBQ aumentó con el contenido de agua, presentó un máximo cuando la relación en peso de agua/fenol fue de 53/1 y se favoreció a altas temperaturas, con el aumento del contenido de aluminio o con la disminución en el contenido de catalizador. El contenido de cobre no fue un factor determinante para la conversión ni para la selectividad en la hidroxilación de fenol. La producción de la p-benzoquinona (PBQ, producto de oxidación de la hidroquinona, fue mínimo cuando se usaron las siguientes condiciones: 80 ºC, fenol: 1 mmol, relación molar fenol/H2O2 de 3/1, catalizador: 20 mg, agua: 5 g, tiempo de reacción: 4 h.

  14. Auricular Acupuncture with Laser

    Science.gov (United States)

    Bahr, Frank

    2013-01-01

    Auricular acupuncture is a method which has been successfully used in various fields of medicine especially in the treatment of pain relief. The introduction of lasers especially low-level lasers into medicine brought besides the already existing stimulation with needles and electricity an additional technique to auricular acupuncture. This literature research looks at the historical background, the development and the anatomical and neurological aspects of auricular acupuncture in general and auricular laser acupuncture in detail. Preliminary scientific findings on auricular acupuncture with laser have been described in detail and discussed critically in this review article. The results of the studies have shown evidence of the effect of auricular laser acupuncture. However, a comparison of these studies was impossible due to their different study designs. The most important technical as well as study parameters were described in detail in order to give more sufficient evidence and to improve the quality of future studies. PMID:23935695

  15. Powering laser diode systems

    CERN Document Server

    Trestman, Grigoriy A

    2017-01-01

    This Tutorial Text discusses the competent design and skilled use of laser diode drivers (LDDs) and power supplies (PSs) for the electrical components of laser diode systems. It is intended to help power-electronic design engineers during the initial design stages: the choice of the best PS topology, the calculation of parameters and components of the PS circuit, and the computer simulation of the circuit. Readers who use laser diode systems for research, production, and other purposes will also benefit. The book will help readers avoid errors when creating laser systems from ready-made blocks, as well as understand the nature of the "mystical failures" of laser diodes (and possibly prevent them).

  16. Laser Beam Focus Analyser

    DEFF Research Database (Denmark)

    Nielsen, Peter Carøe; Hansen, Hans Nørgaard; Olsen, Flemming Ove

    2007-01-01

    the obtainable features in direct laser machining as well as heat affected zones in welding processes. This paper describes the development of a measuring unit capable of analysing beam shape and diameter of lasers to be used in manufacturing processes. The analyser is based on the principle of a rotating......The quantitative and qualitative description of laser beam characteristics is important for process implementation and optimisation. In particular, a need for quantitative characterisation of beam diameter was identified when using fibre lasers for micro manufacturing. Here the beam diameter limits...... mechanical wire being swept through the laser beam at varying Z-heights. The reflected signal is analysed and the resulting beam profile determined. The development comprised the design of a flexible fixture capable of providing both rotation and Z-axis movement, control software including data capture...

  17. Introducing the yellow laser

    Science.gov (United States)

    Lincoln, James

    2018-02-01

    The author has acquired a yellow laser with the specific wavelength of 589 nm. Because this is the first time such a laser has been discussed in this journal, I feel it is appropriate to provide a discussion of its function and capabilities. Normal laser safety should be employed, such as not pointing it into eyes or at people, and using eye protection for the young and inexperienced. It is important to note that 589 nm is the same wavelength as the Sodium-D line (doublet). This allows for the laser to serve as a replacement for sodium lamps, and, considering its rather high price, this added value should be balanced against its cost. What follows is a list of activities that showcase the yellow laser's unique promise as an engaging piece of technology that can be used in the teaching of physics.

  18. Regenerative similariton laser

    Directory of Open Access Journals (Sweden)

    Thibault North

    2016-05-01

    Full Text Available Self-pulsating lasers based on cascaded reshaping and reamplification (2R are capable of initiating ultrashort pulses despite the accumulation of large amounts of nonlinearities in all-fiber resonators. The spectral properties of pulses in self-similar propagation are compatible with cascaded 2R regeneration by offset filtering, making parabolic pulses suitable for the design of a laser of this recently introduced class. A new type of regenerative laser giving birth to similaritons is numerically investigated and shows that this laser is the analog of regenerative sources based solely on self-phase modulation and offset filtering. The regenerative similariton laser does not suffer from instabilities due to excessive nonlinearities and enables ultrashort pulse generation in a simple cavity configuration.

  19. Femtosecond Laser Filamentation

    CERN Document Server

    Chin, See Leang

    2010-01-01

    Femtosecond Laser Filamentation gives a comprehensive review of the physics of propagation of intense femtosecond laser pulses in optical media (principally air) and the applications and challenges of this new technique. This book presents the modern understanding of the physics of femtosecond laser pulse propagation, including unusual new effects such as the self-transformation of the pulse into a white light laser pulse, intensity clamping, the physics of multiple filamentation and competition, and how filaments’ ability to melt glass leads to wave guide writing. The potential applications of laser filamentation in atmospheric sensing and the generation of other electromagnetic pulses from the UV to the radio frequency are treated, together with possible future challenges in the excitation of super-excited states of molecules. Exciting new phenomena such as filament induced ultrafast birefringence and the excitation of molecular rotational wave packets and their multiple revivals in air (gases) will also ...

  20. NASA Space Laser Technology

    Science.gov (United States)

    Krainak, Michael A.

    2015-01-01

    Over the next two decades, the number of space based laser missions for mapping, spectroscopy, remote sensing and other scientific investigations will increase several fold. The demand for high wall-plug efficiency, low noise, narrow linewidth laser systems to meet different systems requirements that can reliably operate over the life of a mission will be high. The general trends will be for spatial quality very close to the diffraction limit, improved spectral performance, increased wall-plug efficiency and multi-beam processing. Improved spectral performance will include narrower spectral width (very near the transform limit), increased wavelength stability and or tuning (depending on application) and lasers reaching a wider range of wavelengths stretching into the mid-infrared and the near ultraviolet. We are actively developing high efficiency laser transmitter and high-sensitivity laser receiver systems that are suitable for spaceborne applications.

  1. Laser-diode pumped Nd:YAG lasers; Laser diode reiki Nd:YAG lasear

    Energy Technology Data Exchange (ETDEWEB)

    Yuasa, H.; Akiyama, Y.; Nakayama, M. [Toshiba Corp., Tokyo (Japan)

    2000-04-01

    Laser-diode pumped Nd:YAG lasers are expected to be applied to laser processing fields such as welding, cutting, drilling, and marking due to their potential for high efficiency and compactness. We are designing and developing laser-diode pumped Nd:YAG lasers using numerical analysis simulation techniques such as ray tracing and thermal analysis. We have succeeded in achieving a laser power of more than 3 kW with 20% efficiency, which is the best ever obtained. In addition, we have developed a laser-diode pumped green laser by second harmonic generation, for precision machining on silicon wafers. (author)

  2. Laser Safety Inspection Criteria

    International Nuclear Information System (INIS)

    Barat, K.

    2005-01-01

    A responsibility of the Laser Safety Officer (LSO) is to perform laser audits. The American National Standard Z136.1 Safe Use of Lasers references this requirement through several sections. One such reference is Section 1.3.2.8, Safety Features Audits, ''The LSO shall ensure that the safety features of the laser installation facilities and laser equipment are audited periodically to assure proper operation''. The composition, frequency and rigor of that inspection/audit rests in the hands of the LSO. A common practice for institutions is to develop laser audit checklists or survey forms It is common for audit findings from one inspector or inspection to the next to vary even when reviewing the same material. How often has one heard a comment, ''well this area has been inspected several times over the years and no one ever said this or that was a problem before''. A great number of audit items, and therefore findings, are subjective because they are based on the experience and interest of the auditor to particular items on the checklist. Beam block usage, to one set of eyes might be completely adequate, while to another, inadequate. In order to provide consistency, the Laser Safety Office of the National Ignition Facility Directorate has established criteria for a number of items found on the typical laser safety audit form. The criteria are distributed to laser users. It serves two broad purposes; first, it gives the user an expectation of what will be reviewed by an auditor. Second, it is an opportunity to explain audit items to the laser user and thus the reasons for some of these items, such as labelling of beam blocks

  3. Los profesores de alumnos con altas habilidades

    Directory of Open Access Journals (Sweden)

    Cándido GENOVARD

    2010-01-01

    Full Text Available En este trabajo analizamos las características de los profesores expertos para alumnos de altas habilidades. Se analizan los antecedentes del tema y el proceso instruccional para atender la diversidad de estos alumnos. Se destaca el valor de las interacciones entre profesor¿ alumnos y los estilos de enseñar y aprender. Asimismo, recogemos pautas de acción y recursos instruccionales a utilizar en el aula para la enseñanza de estos alumnos. No hay un profesor ideal para los alumnos con altas habilidades, pero los docentes deben conocer qué son y cómo funcionan los procesos de enseñanza¿aprendizaje y las variables psicológicas, de contenidos y contextuales implicadas en éstos.

  4. Cenizas, cementos y hormigones con cenizas

    Directory of Open Access Journals (Sweden)

    Calleja, José

    1982-09-01

    Full Text Available This paper describes the chemical composition and the morfological nature of pulverized coal ashes, as well as their physical characteristics. Their influences —actions and effects— on the main properties and behaviour of cements and concretes, and the more adequate conditions for their efficient use un them are also described.

    En este trabajo se exponen la composición química y la naturaleza morfológica de las cenizas pulverulentas de los carbones, así como sus características físicas. Se describen asimismo sus influencias —acciones y efectos— sobre las principales propiedades y comportamientos más importantes de los cementos y de los hormigones, así como las condiciones más idóneas para su más eficaz empleo con y en ellos.

  5. Estudio de pacientes colombianos con homocistinuria

    Directory of Open Access Journals (Sweden)

    M. Bermúdez

    2001-07-01

    Full Text Available La homocistinuria es una alteración bioquímica producida por causas genéticas como son la deficiencia de alguna de las enzimas involucradas en el metabolismo de metionina u homocisteína: Cistationina b sintasa, 5-10 Metilentetrahidrofolato reductasa, o Metionina sintasa al igual que a deficiencias nutricionales y asocio a otras patologías como son la enfermedad renal y problemas  vasculares. El objetivo de este trabajo es la identificación de la deficiencia bioquímica en pacientes con homocistinuria, mediante la cuantificación de las enzimas involucradas, utilizando como muestras fibroblastos y linfocitos.

  6. Cervical disc arthroplasty: Pros and cons.

    Science.gov (United States)

    Moatz, Bradley; Tortolani, P Justin

    2012-01-01

    Cervical disc arthroplasty has emerged as a promising potential alternative to anterior cervical discectomy and fusion (ACDF) in appropriately selected patients. Despite a history of excellent outcomes after ACDF, the question as to whether a fusion leads to adjacent segment degeneration remains unanswered. Numerous US investigational device exemption trials comparing cervical arthroplasty to fusion have been conducted to answer this question. This study reviews the current research regarding cervical athroplasty, and emphasizes both the pros and cons of arthroplasty as compared with ACDF. Early clinical outcomes show that cervical arthroplasty is as effective as the standard ACDF. However, this new technology is also associated with an expanding list of novel complications. Although there is no definitive evidence that cervical disc replacement reduces the incidence of adjacent segment degeneration, it does show other advantages; for example, faster return to work, and reduced need for postoperative bracing.

  7. RadCon Occurrence Reporting Simplified

    International Nuclear Information System (INIS)

    Denham, D. H.

    1999-01-01

    This narrative and accompanying diagrams provide a simplified summary of the RadCon Occurrence Reporting criteria to allow Environmental Restoration Contractor (ERC) staff to efficiently recognize occurrences and to effectively initiate the implementation of the requirements of U.S. Department of Energy (DOE) Order 232.1A, Occurrence Reporting and Processing of Operations Information, and of the ERC criteria defined in BHI-MA-02, ERC Project Procedures, Procedure 2.6, ''Occurrence Investigation and Reporting.'' These directives promote timely identification, categorization, notification, and reporting to DOE and ERC management of reportable occurrences at DOE-owned or -operated facilities that could (1) affect health and safety of the public, (2) seriously impact the intended purpose of DOE facilities, (3) adversely affect the credibility of DOE, or (4) have a noticeable adverse effect on the environment

  8. Con los ojos en las pieles

    Directory of Open Access Journals (Sweden)

    Andrés Inocente Martín Hernández

    2016-10-01

    Full Text Available Metáforas Construidas, exposición realizada en Bogotá, Colombia, donde se exhibieron obras de la artista brasileña Regina Silveira, seleccionadas a partir de una línea conceptual que relacionó el recorte cronológico de la producción de la artista en relación directa con el contexto arquitectónico del espacio expositivo. Esa relación direccional fue considerada en la inserción de los trabajos de otros cuatro artistas en la exposición. El texto destaca los diálogos y métodos utilizados para la concepción, construcción y discusión de la exposición.

  9. Accesibilidad digital para usuarios con limitaciones visuales

    Directory of Open Access Journals (Sweden)

    Toledo, Gabriela Alejandra

    2013-04-01

    Full Text Available El presente trabajo persigue como objetivos: recapitular y analizar los principios básicos de diseño para el desarrollo de tecnologías inclusivas; evaluar ventajas y desventajas en el uso del programa lector de pantalla (JAWS al acceder a entornos comunicacionales, desde las variables de navegabilidad, interoperabilidad, usabilidad y colaboración en la cognición; derivar sugerencias acerca del diseño de entornos de aprendizaje colaborativo, de modo de lograr una mayor efectividad de esta herramienta digital, aplicada a personas con limitaciones en la visión en diverso grado; redactar un manual complementario de orientaciones que facilite el uso de este instrumento inclusivo, aplicado a entornos de enseñanza/ aprendizaje colaborativo.

  10. Jícama: Producto con Identidad Territorial

    Directory of Open Access Journals (Sweden)

    Marisol Idrovo Avecillas

    2015-11-01

    La jícama es un producto con identidad territorial (PIT, son fragmentos de la perspectiva de tierras aptas para el cultivo, producción, comercialización sostenible que se apega al Plan Nacional del Buen Vivir, que se ajusta al cambio de la Matriz Productiva incluyendo a los sectores involucrados del país, este vegetal andino no es consumido regularmente por los ecuatorianos; los resultados obtenidos en el laboratorio nos indican que es un vegetal rico en: grasa, proteína, humedad, fibra dietética, carbohidratos totales, energía total, energía de la grasa, hierro, sodio, potasio, calcio, vitaminas, entre otras propiedades.

  11. Laser requirements for a laser fusion energy power plant

    Institute of Scientific and Technical Information of China (English)

    Stephen; E.Bodner; Andrew; J.Schmitt; John; D.Sethian

    2013-01-01

    We will review some of the requirements for a laser that would be used with a laser fusion energy power plant, including frequency, spatial beam smoothing, bandwidth, temporal pulse shaping, efficiency, repetition rate, and reliability. The lowest risk and optimum approach uses a krypton fluoride gas laser. A diode-pumped solid-state laser is a possible contender.

  12. Lesiones bucales relacionadas con las enfermedades digestivas

    Directory of Open Access Journals (Sweden)

    José A. Pacho Saavedra

    2006-09-01

    Full Text Available Muchas de las lesiones de la mucosa en la cavidad bucal están relacionadas con trastornos anatómicos y funcionales de los órganos del aparato digestivo; algunas forman parte del cuadro clínico de la entidad y otras aparecen como complicaciones de estas. Generalmente son de orígenes inmunológicos, nutricionales o carenciales. Estas lesiones son difíciles de tratar, por lo que es importante conocer las características clínicas que faciliten una adecuada interpretación y al mismo tiempo ofrecer una conducta terapéutica correcta. Se presenta una revisión actualizada de las características semiológicas de las lesiones bucales que forman parte del cuadro clínico de diversas enfermedades digestivas, con el fin de que los médicos generales, clínicos, estomatólogos y gastroenterólogos puedan diagnosticarlas y brindar mejor orientación y tratamiento a los pacientes.Many of the lesions of the mucosa in the oral cavity are related to anatomical and functional disorders of the organs of the digestive system. Some of them are part of the clinical picture of the entity and others appear as complications of them. Generally, they have an immunological, nutritional, or deficiency origin. These lesions are difficult to be treated and that's why it is important to know the clinical characteristics making easy an adequate interpretation, and to follow a suitable therapeutic conduct at the same time. An updated review of the semiological features of the oral lesions corresponding to the clinical picture of diverse digestive diseases is presented, so that the general physicians, clinicians, stomatologists and gastroenterologists be able to diagnose and give a better guidance and treatment to the patients.

  13. Modelización financiera con Excel

    Directory of Open Access Journals (Sweden)

    Lafuente Robledo, M.

    1998-01-01

    Full Text Available La enseñanza de la Matemática de las Operaciones Financieras ha experimentado durante la década de los noventa una transformación profunda como consecuencia de la progresiva introducción de los programas informáticos. Las hojas de cálculo, dada su gran facilidad de uso, su flexibilidad y su utilización generalizada, han sido una de las herramientas disponibles más potentes para el tratamiento de problemas financieros. De ahí que su incorporación a los programas docentes de esta disciplina se hayan convertido en una norma casi obligada para garantizar la calidad de la enseñanza en esta materia. No obstante, es preciso tener en cuenta que para aplicaciones de alto nivel se requieren programas más especializados (por ejemplo, para gestión de carteras y que cada vez están más extendidas otras herrramientas informáticas de cálculo avanzado como los programas de cálculo numérico (por ejemplo, las aplicaciones financieras específicas de Matlab o de cálculo simbólico (Mathematica, Maple, Matlab, Derive, etc.. De ahí que la hoja de cálculo haya dejado de ser el único programa informático de uso generalizado para el tratamiento de operaciones financieras, y que progresivamente sea preciso incorporar las nuevas aplicaciones en los curricula del alumno. La utilización de las hojas de cálculo en la modelización de problemas de matemática financiera representa importantes ventajas didácticas: · Dado el carácter eminentemente práctico de la misma, simplifica en gran medida la materia a impartir, ya que con los principios y razonamientos elementales permite prescindir del desarrollo de buen número de las fórmulas que la matemática financiera plantea para realizar valoraciones. · Como consecuencia se produce un gran ahorro de tiempo en cuanto a las necesidades de clases magistrales, lo cual permite dedicar más tiempo a la explicación detallada y pormenorizada de los conceptos fundamentales. · Desde el punto de vista

  14. Measurements of laser parameters for the Shiva laser fusion facility

    International Nuclear Information System (INIS)

    Ozarski, R.G.

    1979-01-01

    Large laser systems require numerous laser diagnostics to provide configuration, performance and maintenance data to permit efficient operation. The following diagnostics for a large laser system named Shiva are discussed: (1) description of Shiva laser system, (2) what measurements are desired and or required and why, (3) what measurement techniques and packages are employed and a brief description of the operating principles of the sensors employed, and (4) the laser diagnostic data acquisition and display system

  15. LASER PROCESSING ON SINGLE CRYSTALS BY UV PULSE LASER

    OpenAIRE

    龍見, 雅美; 佐々木, 徹; 高山, 恭宜

    2009-01-01

    Laser processing by using UV pulsed laser was carried out on single crystal such as sapphire and diamond in order to understand the fundamental laser processing on single crystal. The absorption edges of diamond and sapphire are longer and shorter than the wave length of UV laser, respectively. The processed regions by laser with near threshold power of processing show quite different state in each crystal.

  16. Laser diode technology and applications

    International Nuclear Information System (INIS)

    Figueroa, L.

    1989-01-01

    This book covers a wide range of semiconductor laser technology, from new laser structures and laser design to applications in communications, remote sensing, and optoelectronics. The authors report on new laser diode physics and applications and present a survey of the state of the art as well as progress in new developments

  17. 1982 laser program annual report

    Energy Technology Data Exchange (ETDEWEB)

    Hendricks, C.D.; Grow, G.R. (eds.)

    1983-08-01

    This annual report covers the following eight sections: (1) laser program review, (2) laser systems and operation, (3) target design, (4) target fabrication, (5) fusion experiments program, (6) Zeus laser project, (7) laser research and development, and (8) energy applications. (MOW)

  18. Fractional laser skin resurfacing.

    Science.gov (United States)

    Alexiades-Armenakas, Macrene R; Dover, Jeffrey S; Arndt, Kenneth A

    2012-11-01

    Laser skin resurfacing (LSR) has evolved over the past 2 decades from traditional ablative to fractional nonablative and fractional ablative resurfacing. Traditional ablative LSR was highly effective in reducing rhytides, photoaging, and acne scarring but was associated with significant side effects and complications. In contrast, nonablative LSR was very safe but failed to deliver consistent clinical improvement. Fractional LSR has achieved the middle ground; it combined the efficacy of traditional LSR with the safety of nonablative modalities. The first fractional laser was a nonablative erbium-doped yttrium aluminum garnet (Er:YAG) laser that produced microscopic columns of thermal injury in the epidermis and upper dermis. Heralding an entirely new concept of laser energy delivery, it delivered the laser beam in microarrays. It resulted in microscopic columns of treated tissue and intervening areas of untreated skin, which yielded rapid reepithelialization. Fractional delivery was quickly applied to ablative wavelengths such as carbon dioxide, Er:YAG, and yttrium scandium gallium garnet (2,790 nm), providing more significant clinical outcomes. Adjustable laser parameters, including power, pitch, dwell time, and spot density, allowed for precise determination of percent surface area, affected penetration depth, and clinical recovery time and efficacy. Fractional LSR has been a significant advance to the laser field, striking the balance between safety and efficacy.

  19. The argon excimer laser

    International Nuclear Information System (INIS)

    Wrobel, W.G.

    1981-02-01

    The electron-beam-pumped argon eximer laser is investigated and tuned for the first time. The electron beam is generated by means of an improved coaxial field emmision diode in which argon gas is excited with power densities of 0.3 GW/cm 3 for 18 ns. The processes in the excited gas of 20 to 65 bar are described in the context of a kinetic model as a sequence of stationary states. Investigations of the amplified spontaneous emission (superfluorescence) confirm the predictions of this model. Only the absorption due to the excited Ar atoms is anomalously high. Reproducible operation of the argon eximer laser was achieved in a wide pressure range with various resonator arrangements. The wavelength of this shortest wavelength of this shortest wavelength excimer laser is 126 nm, the laser line width approx. 1.7 nm, the pulse length 7 to 13 ns, and the laser power 250 kW. The laser emission is tuned from 123.2 nm to 128.4 nm by two different methods (diffraction grating and prism). This tunable laser is thus the one with the shortest wavelength at present. Its line width is 0.25 to 0.4 nm, and the power ue 1.7 kW. (orig.)

  20. Laser wakefield acceleration

    International Nuclear Information System (INIS)

    Esarey, E.; Ting, A.; Sprangle, P.

    1989-01-01

    The laser wakefield accelerator (LWFA) is a novel plasma based electron acceleration scheme which utilizes a relativistic optical guiding mechanism for laser pulse propagation. In the LWFA, a short, high power, single frequency laser pulse is propagated through a plasma. As the laser pulse propagates, its radial and axial ponderomotive forces nonresonantly generate large amplitude plasma waves (wakefields) with a phase velocity equal to the group velocity of the pulse. A properly phased electron bunch may then be accelerated by the axial wakefield and focused by the transverse wakefield. Optical guiding of the laser pulse in the plasma is necessary in order to achieve high energies in a single stage of acceleration. At sufficiently high laser powers, optical guiding may be achieved through relativistic effects associated with the plasma electrons. Preliminary analysis indicates that this scheme may overcome some of the difficulties present in the plasma beat wave accelerator and in the plasma wakefield accelerator. Analytical and numerical calculations are presented which study both laser pulse propagation within a plasma as well as the subsequent generation of large amplitude plasma waves. In addition, the generation of large amplitude plasma waves in regimes where the plasma waves become highly nonlinear is examined

  1. Excimer laser decontamination

    Science.gov (United States)

    Sentis, Marc L.; Delaporte, Philippe C.; Marine, Wladimir; Uteza, Olivier P.

    2000-04-01

    The application of excimer laser ablation process to the decontamination of radioactive surfaces is discussed. This technology is very attractive because it allows to efficiently remove the contaminated particles without secondary waste production. To demonstrate the capability of such technology to efficiently decontaminate large area, we studied and developed a prototype which include a XeCl laser, an optical fiber delivery system and an ablated particles collection cell. The main physical processes taking place during UV laser ablation will be explained. The influence of laser wavelength, pulse duration and absorption coefficient of material will be discussed. Special studies have been performed to understand the processes which limit the transmission of high average power excimer laser through optical fiber, and to determine the laser conditions to optimize the value of this transmission. An in-situ spectroscopic analysis of laser ablation plasma allows the real time control of the decontamination. The results obtained for painting or metallic oxides removal from stainless steel surfaces will be presented.

  2. Equinoterapia en niños con autismo

    OpenAIRE

    Martinez Alvernia, Carlos Francisco

    2015-01-01

    Introducción: Autismo es un trastorno del desarrollo caracterizado por compromiso en interacción social, habilidades de lenguaje, presentando rituales con estereotipias. Sin tratamientos curativos, actualmente se buscan terapias alternativas. Un incremento de la literatura científica de terapias asistidas con animales se ha evidenciado, demostrando mejoría en pacientes autistas con la equinoterapia. Objetivo: Realizar una revisión sistemática de la literatura para evaluar efectividad de la eq...

  3. Color Laser Microscope

    Science.gov (United States)

    Awamura, D.; Ode, T.; Yonezawa, M.

    1987-04-01

    A color laser microscope utilizing a new color laser imaging system has been developed for the visual inspection of semiconductors. The light source, produced by three lasers (Red; He-Ne, Green; Ar, Blue; He-Cd), is deflected horizontally by an AOD (Acoustic Optical Deflector) and vertically by a vibration mirror. The laser beam is focused in a small spot which is scanned over the sample at high speed. The light reflected back from the sample is reformed to contain linear information by returning to the original vibration mirror. The linear light is guided to the CCD image sensor where it is converted into a video signal. Individual CCD image sensors are used for each of the three R, G, or B color image signals. The confocal optical system with its laser light source yields a color TV monitor image with no flaring and a much sharper resolution than that of the conventional optical microscope. The AOD makes possible a high speed laser scan and a NTSC or PAL TV video signal is produced in real time without any video memory. Since the light source is composed of R, G, and B laser beams, color separation superior to that of white light illumination is achieved. Because of the photometric linearity of the image detector, the R, G, and B outputs of the system are most suitably used for hue analysis. The CCD linear image sensors in the optical system produce no geometrical distortion, and good color registration is available principally. The output signal can be used for high accuracy line width measuring. The many features of the color laser microscope make it ideally suited for the visual inspection of semiconductor processing. A number of these systems have already been installed in such a capacity. The Color Laser Microscope can also be a very useful tool for the fields of material engineering and biotechnology.

  4. Dye laser principles with applications

    CERN Document Server

    Duarte, Frank J; Liao, Peter F; Kelley, Paul

    1990-01-01

    A tutorial introduction to the field of dye lasers, Dye Laser Principles also serves as an up-to-date overview for those using dye lasers as research and industrial tools. A number of the issues discussed in this book are pertinent not only to dye lasers but also to lasers in general. Most of the chapters in the book contain problem sets that expand on the material covered in the chapter.Key Features* Dye lasers are among the most versatile and successful laser sources currently available in use Offering both pulsed and continuous-wave operation and tunable from the near ultraviole

  5. Temperature stabilization of injection lasers

    International Nuclear Information System (INIS)

    Albanese, A.

    1987-01-01

    Apparatus which stabilizes the temperature, and thereby the output wavelength, of an injection laser. Means monitor the laser terminal voltage across a laser and derive a voltage therefrom which is proportional to the junction voltage of the laser. Means compares the voltage to a reference value from source and a temperature controller adjusts the laser temperature in response to the results of the comparison. Further embodiments of the present invention vary the output wavelength of the laser by varying the reference value from source against which the laser junction voltage is compared. (author)

  6. Latest development of laser cutting

    OpenAIRE

    Wetzig, Andreas; Herwig, Patrick; Hauptmann, Jan; Goppold, Cindy; Baumann, Robert; Fürst, Andreas; Rose, Michael; Pinder, Thomas; Mahrle, Achim; Beyer, Eckhard

    2016-01-01

    Laser cutting was one of the first applications of laser material processing. Today, laser cutting is the most widespread application among laser material processing besides laser marking. Meanwhile, nearly each material can be cut by means of a laser, in particular since ultra short pulse lasers are available in the power range of up to 100 W. The to be cut material can come with thicknesses from a few microns till tens of millimeters as flat stock or as free form shapes. The paper will conc...

  7. Mi palabra favorita. Una actividad con vídeo

    Directory of Open Access Journals (Sweden)

    Susana Cañuelo Carrión

    2012-08-01

    Full Text Available Mi palabra favorita es un actividad que surge a partir de la propuesta que realizael Instituto Cervantes con la web El día E (www.eldiae.es. Este portal fue creado enconmemoración del día del español, que se celebra desde 2009 el último sábado dejunio. Para festejar la vitalidad de la lengua y el interés mundial que despierta, hablantesy aprendientes de todo el mundo pueden explicar en dicho portal cuál es su palabrafavorita. Y pueden hacerlo con un texto, con un pictograma o con un vídeo.

  8. Anestesia para cesárea en paciente con acondroplasia

    OpenAIRE

    Osorio Rudas, Walter; Socha García, Nury Isabel; Upegui, Alejandro; Ríos Medina, Ángela; Moran, Adrian; Aguirre Ospina, Oscar; Rivera, Carlos

    2012-01-01

    Introducción: En gestantes acondroplásicas se recomienda el parto por cesárea con anestesia general; sin embargo, recientemente se ha reportado el uso de técnicas conductivas con resultados adecuados. Objetivo:Describir el manejo anestésico de una paciente con acondroplasia programada para cesárea utilizando anestesia combinada espinal-epidural. Métodos y resultados:Mostramos el caso de una primigestante acondroplásica con 110 cm de estatura y embarazo de 37 semanas, en quien se realizó cesár...

  9. Plasma rico en plaquetas en pacientes con gonartrosis

    OpenAIRE

    Álvarez López, Alejandro; Ortega González, Carlos; García Lorenzo, Yenima; Arias Sifontes, Joanka; Ruiz de Villa Suárez, Abel

    2013-01-01

    Fundamento: la aplicación del plasma rico en plaquetas se ha convertido en una modalidad de tratamiento para pacientes con gonartrosis, tanto de forma aislada como en combinación con otros procedimientos. Objetivo: actualizar al personal médico sobre aspectos esenciales relacionados con la aplicación del plasma rico en plaquetas en pacientes con gonartrosis. Método: se realizó una revisión bibliográfica de un total de 300 artículos originales publicados en Pubmed, Hinari y Medline, mediante e...

  10. Color speckle in laser displays

    Science.gov (United States)

    Kuroda, Kazuo

    2015-07-01

    At the beginning of this century, lighting technology has been shifted from discharge lamps, fluorescent lamps and electric bulbs to solid-state lighting. Current solid-state lighting is based on the light emitting diodes (LED) technology, but the laser lighting technology is developing rapidly, such as, laser cinema projectors, laser TVs, laser head-up displays, laser head mounted displays, and laser headlamps for motor vehicles. One of the main issues of laser displays is the reduction of speckle noise1). For the monochromatic laser light, speckle is random interference pattern on the image plane (retina for human observer). For laser displays, RGB (red-green-blue) lasers form speckle patterns independently, which results in random distribution of chromaticity, called color speckle2).

  11. Teradiode's high brightness semiconductor lasers

    Science.gov (United States)

    Huang, Robin K.; Chann, Bien; Burgess, James; Lochman, Bryan; Zhou, Wang; Cruz, Mike; Cook, Rob; Dugmore, Dan; Shattuck, Jeff; Tayebati, Parviz

    2016-03-01

    TeraDiode is manufacturing multi-kW-class ultra-high brightness fiber-coupled direct diode lasers for industrial applications. A fiber-coupled direct diode laser with a power level of 4,680 W from a 100 μm core diameter, BPP) of 3.5 mm-mrad and is the lowest BPP multi-kW-class direct diode laser yet reported. This laser is suitable for industrial materials processing applications, including sheet metal cutting and welding. This 4-kW fiber-coupled direct diode laser has comparable brightness to that of industrial fiber lasers and CO2 lasers, and is over 10x brighter than state-of-the-art direct diode lasers. We have also demonstrated novel high peak power lasers and high brightness Mid-Infrared Lasers.

  12. Organic solid-state lasers

    CERN Document Server

    Forget, Sébastien

    2013-01-01

    Organic lasers are broadly tunable coherent sources, potentially compact, convenient and manufactured at low-costs. Appeared in the mid 60’s as solid-state alternatives for liquid dye lasers, they recently gained a new dimension after the demonstration of organic semiconductor lasers in the 90's. More recently, new perspectives appeared at the nanoscale, with organic polariton and surface plasmon lasers. After a brief reminder to laser physics, a first chapter exposes what makes organic solid-state organic lasers specific. The laser architectures used in organic lasers are then reviewed, with a state-of-the-art review of the performances of devices with regard to output power, threshold, lifetime, beam quality etc. A survey of the recent trends in the field is given, highlighting the latest developments with a special focus on the challenges remaining for achieving direct electrical pumping of organic semiconductor lasers. A last chapter covers the applications of organic solid-state lasers.

  13. Windows with selective covering to the solar radiation based in copper for saving energy; Ventanas con recubrimiento selectivo a la radiacion solar basado en cobre que permiten el ahorro de energia

    Energy Technology Data Exchange (ETDEWEB)

    Correa, Genaro; Almanza, Rafael [Instituto de Ingenieria UNAM, Mexico, D.F. (Mexico)

    2000-07-01

    savings and the necessary strategies for such aim, based on the geographic region. [Spanish] Se presentan los resultados de un esfuerzo por contribuir al desarrollo de nuevos elementos constructivos acordes a las necesidades bioclimaticas de las edificaciones en Mexico que propicien el ahorro de energia. Se desarrollaron ventanas con dos tipos de recubrimientos, uno exclusivamente de oxido cuproso (Cu{sub 2}O), y otro resultado del deposito sucesivo de una pelicula de sulfuro cuprico (CuS) sobre otra de oxido cuproso. El segundo tipo de ventanas presento un adecuado control al paso de la radiacion infrarroja, lo que permite reducir aun mas la cantidad de radiacion calorifica que pasa a traves de la ventana. Durante las condiciones de calentamiento, estas ventanas dejan pasar en el peor de los casos, la mitad del calor, reduciendo la carga termica al interior de la habitacion o del edificio. Durante condiciones de enfriamiento, la ventana permite la salida del calor a la mitad de la velocidad, manteniendo durante mas tiempo la temperatura de confort del interior. Los recubrimientos de los mencionados compuestos de cobre fueron fabricados en los laboratorios de los Institutos de Ingenieria y Fisica de la Universidad Nacional Autonoma de Mexico (UNAM). Se utilizo la tecnica de erosion ionica o sputtering de un blanco de cobre 99.999% con ayuda de un plasma compuesto de argon (70%) y oxigeno (30%), que posibilita la oxidacion del cobre y el deposito del Cu{sub 2}O. Se utilizo un sustrato de vidrio flotado comercial de 600x400 mm., este tamano del vidrio estuvo determinado por las limitaciones de espacio de nuestra camara de deposito. La ventana asi obtenida presenta una agradable coloracion amarillenta y gran luminosidad, sin embargo, en el infrarrojo cercano, unicamente bloquea el 50%. Para las propiedades deseadas de control termico era necesario reducir aun mas el paso del calor. Para ello se incorporo una pelicula de sulfuro cuprico con la cual fue posible alcanzar

  14. Laser Hazards Bibliography

    Science.gov (United States)

    1989-10-31

    light on mandibular fracture healing, Stomatologiia, 57(5): 5-9 (1978). 42 Laser Hazards Bibliography 177. Van Gemert, M.J.C., Schets, G.A.C.M., Bishop...U., Laser-coagulation of ruptured fixation suture after lens implantation, J Am Intraocul Implant Soc, 4(2): 54 (1978). 49. Federman, J. L., Ando, F...laser in pediatric surgery, J Ped Surg, 3: 263-270 (April 1968). 82. Hennessy, R. T., and Leibowitz, H., Subjective measurement of accommodation with

  15. Optimising laser tattoo removal

    Directory of Open Access Journals (Sweden)

    Kabir Sardana

    2015-01-01

    Full Text Available Lasers are the standard modality for tattoo removal. Though there are various factors that determine the results, we have divided them into three logical headings, laser dependant factors such as type of laser and beam modifications, tattoo dependent factors like size and depth, colour of pigment and lastly host dependent factors, which includes primarily the presence of a robust immune response. Modifications in the existing techniques may help in better clinical outcome with minimal risk of complications. This article provides an insight into some of these techniques along with a detailed account of the factors involved in tattoo removal.

  16. Ultrashort Laser Pulse Phenomena

    CERN Document Server

    Diels, Jean-Claude

    2006-01-01

    Ultrashort Laser Pulse Phenomena, 2e serves as an introduction to the phenomena of ultra short laser pulses and describes how this technology can be used to examine problems in areas such as electromagnetism, optics, and quantum mechanics. Ultrashort Laser Pulse Phenomena combines theoretical backgrounds and experimental techniques and will serve as a manual on designing and constructing femtosecond (""faster than electronics"") systems or experiments from scratch. Beyond the simple optical system, the various sources of ultrashort pulses are presented, again with emphasis on the basic

  17. Laser-driven accelerators

    International Nuclear Information System (INIS)

    Anon.

    1982-01-01

    Several devices for using laser fields have been proposed and they can be classified in three broad categories - 'far-field' accelerators (such as the principle of inverse free electron lasers), 'media' accelerators (which, for example, use the inverse Cherenkov effect or laser-controlled plasma waves), and 'near-field' accelerators (using a loaded guiding structure such as cavities or gratings). These different approaches come from the fact that a particle cannot be accelerated by the absorption of single photons (because of momentum conservation) and thus some other element has to intervene. (orig./HSI).

  18. Regenerative laser system

    International Nuclear Information System (INIS)

    Biancardi, F.R.; Landerman, A.; Melikian, G.

    1975-01-01

    Regenerative apparatus for exhausting the working medium from the optical cavity of a laser and for supplying preheated diluent to the reaction chamber of a laser is disclosed. In an aftercooler thermal energy is exchanged between the working medium exhausted from the optical cavity and a cryogenic coolant which is subsequently utilized as the motive fluid for an ejector and as a diluent in the production of laser gas. Highly toxic and corrosive gases are condensed out of the working medium as the cryogenic coolant is evaporated and superheated. A preheater transfers additional heat to the diluent before the diluent enters the reaction chamber. (U.S.)

  19. Tunable excimer lasers

    International Nuclear Information System (INIS)

    Sze, R.C.

    1990-01-01

    The wide bandwidth nature of the rare-gas halide excimer transitions allow reasonable tuning of the laser oscillation wavelength that makes it useful for a number of applications. At the same time this wide bandwidth makes narrow band operation difficult and special techniques are needed to insure narrow frequency lasing as well as absolute frequency resettability. The author discusses briefly some of the classical frequency narrowing techniques and then goes on to some recent work that require lasers of special frequency characteristics for special applications including KrF laser fusion

  20. Gas dynamic lasers

    International Nuclear Information System (INIS)

    Hill, R.J.; Jewell, N.T.

    1975-01-01

    In a high powered laser system it is proposed that combustion gases be bled off from a gas turbine engine and their composition adjusted by burning extra fuel in the bleed gases or adding extra substances. Suitable aerodynamic expansion produces a population inversion resulting in laser action in the CO 2 species. Alternatively, bleed gases may be taken from the high pressure compressor of the gas turbine engine and an appropriate fuel burned therein. If required, other adjustments may also be made to the composition and the resulting gaseous mixture subjected to aerodynamic expansion to induce laser action as before. (auth)

  1. Monoenergetic laser wakefield acceleration

    Directory of Open Access Journals (Sweden)

    N. E. Andreev

    2000-02-01

    Full Text Available Three dimensional test particle simulations are applied to optimization of the plasma-channeled laser wakefield accelerator (LWFA operating in a weakly nonlinear regime. Electron beam energy spread, emittance, and luminosity depend upon the proportion of the electron bunch size to the plasma wavelength. This proportion tends to improve with the laser wavelength increase. We simulate a prospective two-stage ∼1GeV LWFA with controlled energy spread and emittance. The input parameters correspond to realistic capabilities of the BNL Accelerator Test Facility that features a picosecond-terawatt CO_{2} laser and a high-brightness electron gun.

  2. Simulations of laser undulators

    Science.gov (United States)

    Milton, S. V.; Biedron, S. B.; Einstein, J. E.

    2016-09-01

    We perform a series of single-pass, one-D free-electron laser simulations based on an electron beam from a standard linear accelerator coupled with a so-called laser undulator, a specialized device that is more compact than a standard undulator based on magnetic materials. The longitudinal field profiles of such lasers undulators are intriguing as one must and can tailor the profile for the needs of creating the virtual undulator. We present and discuss several results of recent simulations and our future steps.

  3. High power excimer laser

    International Nuclear Information System (INIS)

    Oesterlin, P.; Muckenheim, W.; Basting, D.

    1988-01-01

    Excimer lasers emitting more than 200 W output power are not commercially available. A significant increase requires new technological efforts with respect to both the gas circulation and the discharge system. The authors report how a research project has yielded a laser which emits 0.5 kW at 308 nm when being UV preionized and operated at a repetition rate of 300 Hz. The laser, which is capable of operating at 500 Hz, can be equipped with an x-ray preionization module. After completing this project 1 kW output power will be available

  4. Plasmonic colour laser printing

    DEFF Research Database (Denmark)

    Zhu, Xiaolong; Vannahme, Christoph; Højlund-Nielsen, Emil

    2016-01-01

    -beam lithography (EBL) or focused ion beam (FIB), both expensive and not scalable processes that are not suitable for post-processing customization. Here we show a method of colour printing on nanoimprinted plasmonic metasurfaces using laser post-writing. Laser pulses induce transient local heat generation...... that leads to melting and reshaping of the imprinted nanostructures. Depending on the laser pulse energy density, different surface morphologies that support different plasmonic resonances leading to different colour appearances can be created. Using this technique we can print all primary colours...

  5. Optimising Laser Tattoo Removal

    Science.gov (United States)

    Sardana, Kabir; Ranjan, Rashmi; Ghunawat, Sneha

    2015-01-01

    Lasers are the standard modality for tattoo removal. Though there are various factors that determine the results, we have divided them into three logical headings, laser dependant factors such as type of laser and beam modifications, tattoo dependent factors like size and depth, colour of pigment and lastly host dependent factors, which includes primarily the presence of a robust immune response. Modifications in the existing techniques may help in better clinical outcome with minimal risk of complications. This article provides an insight into some of these techniques along with a detailed account of the factors involved in tattoo removal. PMID:25949018

  6. Laser welding engineering

    International Nuclear Information System (INIS)

    Bhieh, N. M.; El Eesawi, M. E.; Hashkel, A. E.

    2007-01-01

    Laser welding was in its early life used mainly for unusual applications where no other welding process would be suitable that was twenty five years ago. Today, laser welding is a fully developed part of the metal working industry, routinely producing welds for common items such as cigarette lighters, which springs, motor/transformer lamination, hermetic seals, battery and pacemaker cans and hybrid circuit packages. Yet very few manufacturing engineering have seriously considers employing lasers in their own operations. Why? There are many reasons, but a main one must be not acquainted with the operation and capabilities of a laser system. Other reasons, such as a relatively high initial cost and a concern about using lasers in the manufacturing environment, also are frequently cited, and the complexity of the component and flexibility of the light delivery system. Laser welding could be used in place of many different standard processes, such as resistance (spot or seam), submerged arc, RF induction, high-frequency resistance, ultrasonic and electronic and electron-beam. while each of these techniques has established an independent function in the manufacturing world, the flexible laser welding approach will operate efficiently and economically in many different applications. Its flexibility will even permit the welding system to be used for other machining function, such as drilling, scribing, sealing and serializing. In this article, we will look at how laser welding works and what benefits it can offer to manufacturing engineers. Some industry observers state that there are already 2,000 laser machine tools being used for cutting, welding and drilling and that the number could reach 30,000 over the next 15 years as manufacturing engineers become more aware of the capabilities of lasers [1). While most laser applications are dedicated to one product or process that involves high-volume, long-run manufacturing, the flexibility of a laser to supply energy to hard

  7. Laser Megajoule synchronization system

    International Nuclear Information System (INIS)

    Luttmann, M.; Pastor, J.F; Drouet, V.; Prat, M.; Raimbourg, J.; Adolf, A.

    2011-01-01

    This paper describes the synchronisation system under development on the Laser Megajoule (LMJ) in order to synchronize the laser quads on the target to better than 40 ps rms. Our architecture is based on a Timing System (TS) which delivers trigger signals with jitter down to 15 ps rms coupled with an ultra precision timing system with 5 ps rms jitter. In addition to TS, a sensor placed at the target chamber center measures the arrival times of the 3 omega nano joule laser pulses generated by front end shots. (authors)

  8. Laser applications in neurosurgery

    Science.gov (United States)

    Cerullo, Leonard J.

    1985-09-01

    The "false start" of the laser in neurosurgery should not be misconstrued as a denial of the inherent advantages of precision and gentleness in dealing with neural tissue. Rather, early investigators were frustrated by unrealistic expectations, cumbersome equipment, and a general ignorance of microtechnique. By the early 70s, microneurosurgery was well established, surgical laser equipment for free hand and microlinked application had been developed, and a more realistic view of the limitations of the laser had been established. Consequently, the late 70s really heralded the renaissance of the laser in neurosurgery. Since then, there has been an overwhelming acceptance of the tool in a variety of clinical situations, broadly categorized in five groups. 1)|Perhaps the most generally accepted area is in the removal of extra-axial tumors of the brain and spinal cord. These tumors, benign by histology but treacherous by location, do not present until a significant amount of neurological compensation has already occurred. The application of additional trauma to the neural tissue, whether by further tumor growth or surgical manipulation, frequently results in irreversible damage. Here, the ability of the laser to vaporize tissue, in a fairly hemostatic fashion, without mechanical or thermal damage to sensitive surrounding tissues, is essential. 2)|The ability to incise delicate neural tissue with minimal spread of thermal destruction to adjacent functioning tissue makes the laser the ideal instrument when tumors deep under the surface are encountered in the brain or spinal cord. Thus, the second group of applications is in the transgression of normal neural structures to arrive at deeper pathological tissue. 3)|The third area of benefit for the laser in neurosurgery has been in the performance of neuroablative procedures, calling for deliberate destruction of functioning neural tissue in a controlled fashion. Again, the precision and shape confinement of the destructive

  9. Relación del perfil salival con el grado de inmunosupresión en pacientes infectados con VIH con y sin tratamiento antirretroviral

    OpenAIRE

    Vera Cruz, Moisés; Cornejo Salaza, José; Chiyong, Teresa Evaristo; Arevalo Abanto, Jorge A.; Villanueva Vílchez, Hugo G.

    2014-01-01

    El objetivo del estudio fue evaluar el perfil salival de pacientes con infección por VIH con y sin Tratamiento Antirretroviral de Gran Actividad (TARGA), por medio de la evaluación de los síntomas de hipofunción salival (Xerostomía, Disgeusia, Disfagia y Susceptibilidad de desarrollar úlceras orales), la Tasa de Flujo salival no estimulado, el pH salival y la viscosidad salival; estableciendo su relación con el Grado de Inmunosupresión, evaluado por medio del Recuento de Linfocitos CD4/μl. Se...

  10. Estudio comparativo del efecto del cepillado con una crema dental con propóleos rojos y de un gel con clorofila

    OpenAIRE

    Estela Gispert Abreu; Elena Cantillo Estrada; Aracelys Rivero López; Berta Oramas Rodríguez

    1998-01-01

    Se analiza comparativamente el efecto de un gel dental de clorofila y de una crema dental con propóleos rojos sobre varios parámetros relacionados con la caries dental, en escolares que se cepillaron durante 21 días con dichos productos. Se obtuvieron resultados favorables principalmente en la disminución del grado de infección por Streptococcus mutans y la elevación de la capacidad individual de remineralización; salvo en este último no hubo diferencias estadísticamente significativas.Author...

  11. MODELADO CON REDES DE PETRI E IMPLEMENTACIÓN CON GRAFCET DE UN SISTEMA DE MANUFACTURA FLEXIBLE CON PROCESOS CONCURRENTES Y RECURSOS COMPARTIDOS

    OpenAIRE

    Johanna Stella Castellanos Arias; Leonardo Enrique Solaque Guzmán

    2010-01-01

    En este trabajo, se presenta el modelado de un Sistema de Manufactura Flexible (SMF), con procesos concurrentes y recursos compartidos mediante Sistemas a Eventos Discretos (SED), específicamente Redes de Petri (RdP), y GRAFCET. El SMF se plantea como un modelo hipotético que se modela con una RdP con el objeto de identificar su dinámica y hallar la secuencia óptima de funcionamiento del sistema. Se desarrolló un modelo matemático que permite estimar el vector de tiempo acumulado de un proces...

  12. Laser tests of silicon detectors

    International Nuclear Information System (INIS)

    Dolezal, Zdenek; Escobar, Carlos; Gadomski, Szymon; Garcia, Carmen; Gonzalez, Sergio; Kodys, Peter; Kubik, Petr; Lacasta, Carlos; Marti, Salvador; Mitsou, Vasiliki A.; Moorhead, Gareth F.; Phillips, Peter W.; Reznicek, Pavel; Slavik, Radan

    2007-01-01

    This paper collects experiences from the development of a silicon sensor laser testing setup and from tests of silicon strip modules (ATLAS End-cap SCT), pixel modules (DEPFET) and large-area diodes using semiconductor lasers. Lasers of 1060 and 680 nm wavelengths were used. A sophisticated method of focusing the laser was developed. Timing and interstrip properties of modules were measured. Analysis of optical effects involved and detailed discussion about the usability of laser testing for particle detectors are presented

  13. MARCADO CON LÁSER SOBRE CERÁMICA VIDRIADA POR APORTE SUPERFICIAL DE UN PIGMENTO DE COBALTO

    Directory of Open Access Journals (Sweden)

    Maryory Astrid Gómez

    2008-07-01

    Full Text Available El procesamiento de materiales por láser tiene gran aplicación a escala industrial, para imprimir patrones gráficos sobre superficies cerámicas. La rápida implementación de este proceso se debe a que, respecto al proceso convencional de horneado, tiene ventajas tales como: se concentra el calor sólo en la zona irradiada, lo que conlleva un menor consumo de energía sin afectar significativamente el resto de la pieza; se obtienen patrones gráficos de alta resolución espacial; permite introducir cambios durante el proceso sin requerir largas paradas, y la generación de residuos es mínima o casi nula. En este estudio se presentan los resultados obtenidos en el vidriado con láser Nd:YAG (λ&=1064 nm sobre las superficies esmaltadas de azulejos, las cuales fueron previamente recubiertas con pigmento negro de cobalto. Con el láser operando en modo continuo (CW, se marcaron una serie de líneas, cuyo ancho y profundidad evidenciaron una dependencia directa con la variación de la potencia y velocidad de desplazamiento del haz láser sobre la superficie del azulejo. Estas líneas vidriadas fueron finalmente caracterizadas por microscopía óptica, espectroscopia de dispersión de energía (EDS y difracción de rayos X.Laser materials processing has great application to industrial scale, to print graphic patterns on ceramics surfaces. The fast implementation of this process is due to the fact that, with respect to the conventional baking process, has advantages, such as: heat is concentrated only in the radiated zone that involves a smaller energy consumption without affecting significantly the rest of the piece, graphic patterns with of highly spatial resolution are obtained, it permits to introduce changes during the process without requiring long stops, and low or almost none generation of residues. In this study the results obtained from Nd:YAG (λ=1064 nm laser glazing on the enameled surfaces of glazed tiles, which were previously

  14. Enfermedad periodontal en pacientes con discapacidad en custodia versus pacientes con discapacidad independientes

    Directory of Open Access Journals (Sweden)

    Fermín-Guerrero-Del Ángel

    2012-01-01

    Full Text Available Objetivo: Identificar el estado de salud periodontal en pacientes con discapacidad en custodia versus pacientes independientes en su higiene oral. Material y métodos: Se examinaron pacientes con discapacidad, ambos sexos, 3 a 19 años que acuden al Servicio de Odontopediatría del Centro de Rehabilitación Infantil Teletón (CRIT Tamaulipas mediante revisión de cavidad oral y aplicación del Índice de Higiene Oral Simplificado (IHOS, Índice Periodontal Comunitario de la Necesidad de Tratamiento (IPCNT y entrevista con su cuidador primario. Se agruparon en dos categorías: Independientes y de Custodia. Resultados: En el total de la muestra la Media y Desviación estándar (D.E. de IPCNT fue de 0.89±0.54, así como el IHOS de 1.88±0.77. El IPCNT en pacientes con discapacidad de Custodia fue 0.91±0.57 e Independientes de 0.86±0.49 (p=0.70, IHOS en pacientes de Custodia 1.89±0.78 e Independientes 1.87±.0.74 (p=.93. IPCNT en géneros masculino 1.03±0.54 y femenino 0.75±0.51 (p=.009. IHOS en pacientes que habitan área rural 2.41±1.25 y área urbana 1.83±0.68 (p=.02. Relación entre la edad y la necesidad de tratamiento periodontal (p=0.001. Frecuencia del cepillado del grupo Independientes 2.03±0.56 y de Custodia 2.00±0.75 (p=.84. Conclusiones: No existe diferencia en el estado de salud periodontal y el grado de higiene oral entre pacientes con discapacidad Independientes y de Custodia. La mayoría de los pacientes Independientes y de Custodia tienen una necesidad de tratamiento de Instrucción de Higiene Oral (TN1 y tienen Higiene Oral Regular.

  15. Multispot fiber laser welding

    DEFF Research Database (Denmark)

    Schutt Hansen, Klaus

    This dissertation presents work and results achieved in the field of multi beam fiber laser welding. The project has had a practical approach, in which simulations and modelling have been kept at a minimum. Different methods to produce spot patterns with high power single mode fiber lasers have...... been examined and evaluated. It is found that both diamond turned DOE’s in zinc sulphide and multilevel etched DOE’s (Diffractive Optical Elements) in fused silica have a good performance. Welding with multiple beams in a butt joint configuration has been tested. Results are presented, showing it has...... been possible to control the welding width in incremental steps by adding more beams in a row. The laser power was used to independently control the keyhole and consequently the depth of fusion. An example of inline repair of a laser weld in butt joint configuration was examined. Zinc powder was placed...

  16. Lasers and holography

    CERN Document Server

    Kock, Winston E

    1981-01-01

    Accessible, illustrated introduction covers wave patterns and coherence, summarizes the development of lasers and the phenomenon of wave diffraction, and describes zone plates and properties of holograms. 1981 edition.

  17. Jupiter Laser Facility

    Data.gov (United States)

    Federal Laboratory Consortium — The Jupiter Laser Facility is an institutional user facility in the Physical and Life Sciences Directorate at LLNL. The facility is designed to provide a high degree...

  18. Blackbody metamaterial lasers

    KAUST Repository

    Liu, Changxu

    2015-01-01

    We investigate both theoretically and experimentally a new type of laser, which exploits a broadband light "condensation" process sustained by the stimulated amplification of an optical blackbody metamaterial. © 2014 Optical Society of America.

  19. Electra Laser Facility

    Data.gov (United States)

    Federal Laboratory Consortium — FUNCTION: The Electra Laser Facility is used to develop the science and technology needed to develop a reliable, efficient, high-energy, repetitively pulsed krypton...

  20. Airclad fiber laser technology

    DEFF Research Database (Denmark)

    Hansen, Kim P.; Olausson, Christina Bjarnal Thulin; Broeng, Jes

    2011-01-01

    High-power fiber lasers and amplifiers have gained tremendous momentum in the last 5 years. Many of the traditional manufacturers of gas and solid-state lasers are now pursuing the fiber-based systems, which are displacing the conventional technology in many areas. High-power fiber laser systems...... require reliable fibers with large cores, stable mode quality, and good power handling capabilities-requirements that are all met by the airclad fiber technology. In the present paper we go through many of the building blocks needed to build high-power systems and we show an example of a complete airclad...... laser system. We present the latest advancements within airclad fiber technology including a new 100 m single-mode polarization-maintaining rod-type fiber capable of amplifying to megawatt power levels. Furthermore, we describe the novel airclad-based pump combiners and their use in a completely...

  1. Laser fusion overview

    International Nuclear Information System (INIS)

    Nuckolls, J.

    1976-01-01

    Because of recent breakthroughs in the target area, and in the glass laser area, the scientific feasibility of laser fusion--and of inertial fusion--may be demonstrated in the early 1980's. Then the development in that time period of a suitable laser (or storage ring or other driving source) would make possible an operational inertial fusion reactor in this century. These are roughly the same time scales as projected by the Tokamak magnetic confinement approach. It thus appears that the 15-20 year earlier start by magnetic confinement fusion may be overcome. Because inertial confinement has been demonstrated, and inertial fusion reactors may operate on smaller scales than Tokamaks, laser fusion may have important technical and economic advantages

  2. Laser therapy for periodontitis

    Science.gov (United States)

    Efanov, O. I.

    2001-04-01

    An investigation was made of applying pulsed (lambda) equals 0.89 micrometers laser radiation in the treatment for early diagnosed periodontitis. The investigation was made on 65 patients (47 patients constituted the experimental group and 18 patients constituted a control group) affected by periodontitis. Clinical and functional tests revealed that laser therapy produced a string effect on the course of the illness. It reduced bleeding, inflammation, and pruritus. However, it did not produce an affect on electroexcitation. Biomicroscopic examinations and periodontium rheography revealed that the gingival blood flow became normal after the course of laser therapy. The capillary permeability and venous congestion decreased, which was confirmed by the increased time of vacuum tests, raised gingival temperature, reduced tissue clearance, and increased oxygen tension. Apart from that, laser therapy subsided fibrinolysis, proteolytic tissue activity, and decreased the exudative inflammation of periodontium.

  3. Laser Guidance Analysis Facility

    Data.gov (United States)

    Federal Laboratory Consortium — This facility, which provides for real time, closed loop evaluation of semi-active laser guidance hardware, has and continues to be instrumental in the development...

  4. Airclad fiber laser technology

    DEFF Research Database (Denmark)

    Hansen, Kim P.; Olausson, Christina Bjarnal Thulin; Broeng, Jes

    2008-01-01

    High-power fiber lasers and amplifiers have gained tremendous momentum in the last five years, and many of the traditional manufactures of gas and solid-state lasers are pursuing the attractive fiber-based systems, which are now displacing the old technology in many areas. High-power fiber laser...... systems require specially designed fibers with large cores and good power handling capabilities - requirements that are all met by the airclad fiber technology. In the present paper we go through many of the building blocks needed to build high-power systems and we show an example of a complete airclad...... laser system. We present the latest advancements within airclad fiber technology including a new 70 μm single-mode polarization-maintaining rod-type fiber capable of amplifying to MW power levels. Furthermore we describe the novel airclad based pump combiners and their use in a completely monolithic 350...

  5. Improved Laser Vibration Radar

    National Research Council Canada - National Science Library

    Hilaire, Pierre

    1998-01-01

    .... This thesis reconfigured an existing CO2 laboratory laser radar system that is capable of measuring the frequencies of vibration of a simulated target into a more compact and rugged form for field testing...

  6. Physics of laser plasma

    International Nuclear Information System (INIS)

    Rubenchik, A.; Witkowski, S.

    1991-01-01

    This book provides a comprehensive review of laser fusion plasma physics and contains the most up-to-date information on high density plasma physics and radiation transport, useful for astrophysicists and high density physicists

  7. Fusion reactor pumped laser

    International Nuclear Information System (INIS)

    Jassby, D.L.

    1988-01-01

    A nuclear pumped laser is described comprising: a toroidal fusion reactor, the reactor generating energetic neutrons; an annular gas cell disposed around the outer periphery of the reactor, the cell including an annular reflecting mirror disposed at the bottom of the cell and an annular output window disposed at the top of the cell; a gas lasing medium disposed within the annular cell for generating output laser radiation; neutron reflector material means disposed around the annular cell for reflecting neutrons incident thereon back into the gas cell; neutron moderator material means disposed between the reactor and the gas cell and between the gas cell and the neutron reflector material for moderating the energy of energetic neutrons from the reactor; converting means for converting energy from the moderated neutrons to energy pumping means for pumping the gas lasing medium; and beam compactor means for receiving output laser radiation from the annular output window and generating a single output laser beam therefrom

  8. Compact semiconductor lasers

    CERN Document Server

    Yu, Siyuan; Lourtioz, Jean-Michel

    2014-01-01

    This book brings together in a single volume a unique contribution by the top experts around the world in the field of compact semiconductor lasers to provide a comprehensive description and analysis of the current status as well as future directions in the field of micro- and nano-scale semiconductor lasers. It is organized according to the various forms of micro- or nano-laser cavity configurations with each chapter discussing key technical issues, including semiconductor carrier recombination processes and optical gain dynamics, photonic confinement behavior and output coupling mechanisms, carrier transport considerations relevant to the injection process, and emission mode control. Required reading for those working in and researching the area of semiconductors lasers and micro-electronics.

  9. YAG Laser or bur

    African Journals Online (AJOL)

    2018-02-23

    Feb 23, 2018 ... for the clinical durability of resin-based dental restorations.[1]. Microleakage ... studies evaluating the use of laser systems in primary teeth for cavity ... sealed with glass ionomer restorative material (Fuji. II LC, GC Corporation ...

  10. Foundations of laser spectroscopy

    CERN Document Server

    Stenholm, Stig

    2005-01-01

    A simple presentation of the theoretical foundations of steady-state laser spectroscopy, this text helps students to apply theory to calculations with a systematic series of examples and exercises. 1984 edition.

  11. Thermonuclear fusion by laser

    International Nuclear Information System (INIS)

    Delpech, J.-F.; Fabre, Edouard.

    1978-01-01

    This paper is intended to describe the principle of inetia containment by laser and the research effort undertaken for this purpose. After having enumerated the principal thermonuclear reactions useful for fusion, the authors derive the rhoR criterion that characterizes inertia containment, as well as the Lawson criterion in the case of magnetic containment. The main physics problems involved in inertia containment by laser are enunciated and the article ends with a review of means resorted to in France and abroad for studying this problem. This review also reports C.N.R.S. bustling in this field, within the scope of competence of G.I.L.M. (Groupement de Recherches Coordonnees sur l'Interaction Laser-Matiere = Group for coordinated investigation of matter-laser interaction) established in Paris at the Ecole Polytechnique [fr

  12. DIFFRACTION SYNCHRONIZATION OF LASERS,

    Science.gov (United States)

    semiconductor lasers while suppressing parasitic generation in the plane of the mirror. The diffraction coupling coefficient of open resonators is calculated, and the stability conditions of the synchronized system is determined.

  13. Inertial-confinement fusion with lasers

    International Nuclear Information System (INIS)

    Betti, R.; Hurricane, O. A.

    2016-01-01

    The quest for controlled fusion energy has been ongoing for over a half century. The demonstration of ignition and energy gain from thermonuclear fuels in the laboratory has been a major goal of fusion research for decades. Thermonuclear ignition is widely considered a milestone in the development of fusion energy, as well as a major scientific achievement with important applications to national security and basic sciences. The U.S. is arguably the world leader in the inertial con fment approach to fusion and has invested in large facilities to pursue it with the objective of establishing the science related to the safety and reliability of the stockpile of nuclear weapons. Even though significant progress has been made in recent years, major challenges still remain in the quest for thermonuclear ignition via laser fusion

  14. Efectos del tratamiento con litio sobre las funciones neurosicológicas de pacientes con trastorno bipolar de tipo I

    Directory of Open Access Journals (Sweden)

    Anabel Martínez Aran

    2008-11-01

    Full Text Available OBJETIVO: determinar si el tratamiento continuo con litio influye en el desempeño cognitivo de un grupo de pacientes eutímicos con trastorno afectivo bipolar I. MÉTODO: se evaluó el desempeño cognitivo usando pruebas neurosicológicas de atención, memoria y función ejecutiva en 20 pacientes eutímicos con trastorno afectivo bipolar I que no tomaban medicación, 20 pacientes eutímicos con trastorno afectivo bipolar I quienes continuaban regularmente el tratamiento con carbonato de litio, y un tercer grupo de 20 pacientes control. RESULTADOS: no se encontraron diferencias estadísticamente significativas entre los dos grupos de pacientes con trastorno afectivo bipolar. Sin embargo, al compararlos con el grupo control, su desempeño en términos de memoria verbal, viso-verbal y asociación semántica medida fue menor. DISCUSIÓN: los pacientes con trastorno afectivo bipolar I muestran deficiencias en términos de memoria verbal y viso-verbal que no pueden ser atribuidos al tratamiento regular con carbonato de litio. Por el contrario, estas deficiencias podrían ser consideradas como características de rasgo de este trastorno.

  15. Calidad de vida relacionada con la salud del niño y del adolescente con obesidad

    OpenAIRE

    Hurtado-Valenzuela, Jaime Gabriel; Álvarez-Hernández, Gerardo

    2014-01-01

    Objetivo Estimar la calidad de vida relacionada con la salud (CVRS) en un grupo de niños y adolescentes con obesidad de la ciudad de Hermosillo, Sonora, México. Métodos Se realizó un estudio transversal utilizando el cuestionario PedsQL® para comparar la CVRS de 200 niños y adolescentes con obesidad al igual que a sus padres, con dos grupos de control, uno de la comunidad (n=400) y otro grupo de usuarios (n=200) del Hospital Infantil del Estado de Sonora. Las diferencias en la CVRS fueron eva...

  16. Efficiencies of laser dyes for atomic vapor laser isotope separation

    International Nuclear Information System (INIS)

    Maeda, Mitsuo; Oki, Yuji; Uchiumi, Michihiro; Takao, Takayuki; Igarashi, Kaoru; Shimamoto, Kojiro.

    1995-01-01

    Efficiencies of 30 laser dyes for the atomic vapor laser isotope separation (AVLIS) are experimentally evaluated with a dye laser pumped by a frequency-doubled Nd:YAG laser. On the other hand, a simulation code is developed to describe the laser action of Rhodamine 6G, and the dependence of the laser efficiency on the pump wavelength is calculated. Following conclusions are obtained by these considerations:space: 1) Pyrromethene 567 showed 16% higher laser efficiency than Rhodamine 6G by 532 nm pumping, and Pyrromethene 556 has an ability to provide better efficiency by green light pumping with a Cu vapor laser; 2) Kiton red 620 and Rhodamine 640, whose efficiencies were almost the same as Rhodamine 6G by 532 nm pumping, will show better efficiencies by two-wavelength pumping with a Cu vapor laser. (author)

  17. Future prospects of laser diodes and fiber lasers

    International Nuclear Information System (INIS)

    Ueda, Ken-ichi

    2000-01-01

    For the next century we should develop new concepts for coherent control of light generation and propagation. Owing to the recent development of ultra fine structures in semiconductor lasers, fiber lasers, and various kinds of waveguide structure, we can make optical devices which control the light propagation artificially. But, the phase locking and phase control of multiple laser oscillators are one of the most important directions of laser science and technology. The coherent summation has been a dream of laser since 1960. Is it possible to solve this old and quite challenging problem for laser science? This is also a very basic concept because the laser action based on the stimulated emission is the process of coherent summation of huge number of photons emitted from individual atoms. In this paper, I discuss the fundamental direction of laser research in the next ten or twenty years. The active optics and laser technology should be combined intrinsically in near future. (author)

  18. High-energy molecular lasers self-controlled volume-discharge lasers and applications

    CERN Document Server

    Apollonov, V V

    2016-01-01

    This book displays the physics and design of high-power molecular lasers. The lasers described are self-controlled volume-discharge lasers. The book explains self-sustained discharge lasers, self-initiated discharge lasers and technical approaches to laser design. Important topics discussed are laser efficiency, laser beam quality and electric field homogeneity. The book contains many new innovative applications.

  19. Transurethral vaporesection of prostate: diode laser or thulium laser?

    Science.gov (United States)

    Tan, Xinji; Zhang, Xiaobo; Li, Dongjie; Chen, Xiong; Dai, Yuanqing; Gu, Jie; Chen, Mingquan; Hu, Sheng; Bai, Yao; Ning, Yu

    2018-05-01

    This study compared the safety and effectiveness of the diode laser and thulium laser during prostate transurethral vaporesection for treating benign prostate hyperplasia (BPH). We retrospectively analyzed 205 patients with BPH who underwent a diode laser or thulium laser technique for prostate transurethral vaporesection from June 2016 to June 2017 and who were followed up for 3 months. Baseline characteristics of the patients, perioperative data, postoperative outcomes, and complications were compared. We also assessed the International Prostate Symptom Score (IPSS), quality of life (QoL), maximum flow rate (Q max ), average flow rate (AFR), and postvoid residual volume (PVR) at 1 and 3 months postoperatively to evaluate the functional improvement of each group. There were no significant differences between the diode laser and thulium laser groups related to age, prostate volume, operative time, postoperative hospital stays, hospitalization costs, or perioperative data. The catheterization time was 3.5 ± 0.8 days for the diode laser group and 4.7 ± 1.8 days for the thulium laser group (p diode laser and thulium laser contributes to safe, effective transurethral vaporesection in patients with symptomatic BPH. Diode laser, however, is better than thulium laser for prostate transurethral vaporesection because of its shorter catheterization time. The choice of surgical approach is more important than the choice of laser types during clinical decision making for transurethral laser prostatectomy.

  20. Resultados obtenidos en pacientes con dolor sometidos a tratamiento

    Directory of Open Access Journals (Sweden)

    Fe Boch Valdés

    2001-04-01

    Full Text Available El dolor tiene una proyección biopsicosocial, síntoma por el que gran número de pacientes son atendidos, requiere de visión multidimensional, por lo que origina los grupos multidisciplinarios y las Clínicas del Dolor. El aumento en la toxicidad medicamentosa y otras técnicas invasivas, que no siempre producen alivio, ha incrementado el uso de terapias naturales y biológicas. En este estudio se recogen resultados de tratamientos naturales y convencionales utilizados en un período de 5 años. Se estudiaron 9 280 pacientes con dolor, a los que se aplicaron las técnicas de electroacupuntura, acupuntura, láser, estimulación eléctrica nerviosa transcutánea (TENS, faciocibernetoterapia (FACI, moxibustión, auriculoterapia, técnicas psicológicas, homeopatía, masajes, magnetoterapia y fitoterapia. Las variables de respuesta al tratamiento fueron consideradas por escala análoga visual a la 5ta y 10ma sesión. Encontramos que las lumbalgias fueron más frecuentes, y la electroacupuntura y la acupuntura las técnicas más efectivas. Los métodos naturales utilizados fueron eficaces, económicos y útiles en el tratamiento del dolor.Pain has a biopsychosocial projection and many patients receive attention because of this symptom, which requires a multidimensional vision that gives rise to the multidisciplinary groups and to the Pain Clinic. The increase in drug toxicity and other invasive techniques that not always cause relief have promoted the use of natural and biologic therapies. In the present study, the results of natural and conventional treatments used for 5 years were collected. A total of 9 280 patients with pain were studied. Electroacupuncture, acupuncture, laser, transcutaneous nerve electric stimulation, phaciocybernetic therapy (PHACI, moxibustion, auricle therapy, psychologic techniques, homeopathy, massages, magnetotherapy and phytotherapy were applied. Variables of response to treatment were considered by visual analogue

  1. Pulsed chemical laser

    International Nuclear Information System (INIS)

    Jacobson, T.V.; Kimbell, G.H.

    1975-01-01

    A hydrogen fluoride laser capable of operating super radiantly and at atmospheric pressure is described. A transverse electrical discharge is utilized to energize the reaction of a hydrogen donor to provide hydrogen fluoride in a metastable energy state which reverts to a stable state by laser action. A large range of hydrogen and fluorine donors is disclosed. A preferred pair of donors is sulphur hexafluoride and propane. Helium is frequently added to the gas mix to act as a buffer. (U.S.)

  2. Hybrid vertical cavity laser

    DEFF Research Database (Denmark)

    Chung, Il-Sug; Mørk, Jesper

    2010-01-01

    A new hybrid vertical cavity laser structure for silicon photonics is suggested and numerically investigated. It incorporates a silicon subwavelength grating as a mirror and a lateral output coupler to a silicon ridge waveguide.......A new hybrid vertical cavity laser structure for silicon photonics is suggested and numerically investigated. It incorporates a silicon subwavelength grating as a mirror and a lateral output coupler to a silicon ridge waveguide....

  3. Laser Resurfacing Pearls

    OpenAIRE

    Shah, Sonia; Alam, Murad

    2012-01-01

    Ablative skin resurfacing using the carbon dioxide laser was long considered the gold standard for treatment of photoaging, acne scars, and rhytids. However, conventional full-face carbon dioxide resurfacing is associated with significant risk of side effects and a prolonged postoperative recovery period. Fractional resurfacing has recently revolutionized laser surgery by offering close to comparable results with minimal side effects and a more rapid recovery. Although fractional devices have...

  4. Laser cooling of solids

    Energy Technology Data Exchange (ETDEWEB)

    Epstein, Richard I [Los Alamos National Laboratory; Sheik-bahae, Mansoor [UNM

    2008-01-01

    We present an overview of solid-state optical refrigeration also known as laser cooling in solids by fluorescence upconversion. The idea of cooling a solid-state optical material by simply shining a laser beam onto it may sound counter intuitive but is rapidly becoming a promising technology for future cryocooler. We chart the evolution of this science in rare-earth doped solids and semiconductors.

  5. Laser radiation protection

    International Nuclear Information System (INIS)

    Pantelic, D.; Muric, B.; Vasiljevic, D.

    2011-01-01

    We have presented the effects of laser radiation on human organism, with special emphasize on eye as the most sensitive organ. It was pointed-out that there are many parameters that should be taken into account when determining the level of protection from laser light. In that respect it is important to be aware of international standards that regulate this area. In addition, we have described a new material which efficiently protects human eye, by formation of microlens and carbonization. [sr

  6. SHIVA laser: nearing completion

    International Nuclear Information System (INIS)

    Glaze, J.A.; Godwin, R.O.

    1977-01-01

    Construction of the Shiva laser system is nearing completion. This laser will be operating in fall 1977 and will produce over 20 terawatts of focusable power in a subnanosecond pulse. Fusion experiments will begin early in 1978. It is anticipated that thermonuclear energy release equal to one percent that of the incident light energy will be achieved with sub-millimeter deuterium-tritium targets. From other experiments densities in excess of a thousand times that of liquid are also expected

  7. CONSIDERACIONES RELACIONADAS CON LAS INSPECCIONES DE SOFTWARE

    Directory of Open Access Journals (Sweden)

    Bexy Alfonso Espinosa

    2006-04-01

    Full Text Available

     

     

    Las consideraciones que en el presente trabajo se reflejan están enfocadas a enfatizar la importancia y necesidad de la aplicación de técnicas de verificación como las inspecciones de software, en la industria de software. Especialmente si de pequeñas y medianas empresas se trata pues en ellas recae la responsabilidad de lograr una industria de software de excelencia y con la calidad requerida en países en vías de desarrollo. Se analizan además, una serie de autores y las investigaciones que han realizado relativas a la concepción del proceso de inspección de software y los recursos y personal que deben tenerse en cuenta para ello.

  8. derechos de las personas con VIH

    Directory of Open Access Journals (Sweden)

    Ana Elena Badilla

    2007-01-01

    Full Text Available El marco constitucional y legal de Costa Rica, incluida la jurisprudencia de la Sala Constitucional de la Corte Suprema de Justicia, es fiel garante de los derechos humanos. Además, la existencia de un amplio marco jurídico internacional vigente en el país sobre protección de tales derechos contribuye a llenar las lagunas que presenta la legislación nacional. Particularmente destacable ha sido el papel jugado por la citada Sala Constitucional en la defensa de los derechos humanos de las personas afectadas por el virus de inmunodeficiencia humana (VIH, en especial al garantizarles sus derechos a los medicamentos antirretrovirales. También la Defensoría de los Habitantes ha instado en múltiples ocasiones a las instituciones públicas a impulsar políticas que permitan alcanzar los fines previstos en la legislación sobre la materia, la cual presenta aún importantes vacíos en relación con la perspectiva de género, la población joven, los derechos de la personalidad o el ámbito laboral, entre otros.

  9. Factores psicosociales del trabajo con computador

    Directory of Open Access Journals (Sweden)

    Guerrero Juan

    1996-12-01

    Full Text Available

    The generalized use of the computer in all the social activity fields imposes the identification of those critical aspects of their implementation. This paper it's a detailed review of the psychosocial factors inherent to the relationship between the health and the computer work at the office. The factors documented are: organizational, ergonomics, those of the requirements of the work and those of the personal characteristics of the computer users.

    El uso generalizado del computador en todos los campos de actividad social impone la identificación de aquellos aspectos críticos de su implementación. En este trabajo se elabora una detallada revisión de los factores psicosociales inherentes a la relación entre la salud y el trabajo con computador en las oficinas. Se documentan los factores organizacionales, los ergonómicos, los de las exigencias del trabajo y los de las características personales de los usuarios de computadores.

  10. Corte de placas solares con láser. Estudio de modificaciones microestructurales

    Directory of Open Access Journals (Sweden)

    Ramírez Del Valle, A. J.

    2003-06-01

    Full Text Available In photovoltaic solar cells manufacturing process, system breaks are produced. Recycling improves the material profitability. In this sense, manufacturing of components with non-straight shapes is not feasible using traditional methods. The processing of these materials through Nd-YAG laser, allows manufacturing with any geometric shape. This work shows a study of solar cells cutting process with laser. First of all, it is necessary to carry out a parameter optimization in order to make an accurate material cutting. The microstructure of the cutting area and possible microcompositional changes were studied by scanning electronic miscroscopy (SEM and X-ray analysis (EDX.

    En el proceso de fabricación de placas fotovoltaicas se producen roturas de las células solares, por tanto, el reciclaje es necesario para mejorar la rentabilidad de este proceso, además, la fabricación de piezas de formas curvas no es factible por los métodos tradicionales. El procesado de estos materiales mediante un láser de Nd-YAG, permitirá la fabricación en cualquier forma geométrica además del mejor aprovechamiento de las placas desechadas por estar rotas. El presente trabajo muestra un estudio del proceso de corte de placas solares con láser. En primer lugar se procede a la optimización de los parámetros necesarios para realizar el corte de este material. La microestructura de la zona de corte y los posibles cambios microcomposicionales que se hayan podido producir, se estudian mediante microscopía electrónica de barrido, con microanálisis de energías dispersivas de Rayos X.

  11. Laser Scanning in Forests

    Directory of Open Access Journals (Sweden)

    Håkan Olsson

    2012-09-01

    Full Text Available The introduction of Airborne Laser Scanning (ALS to forests has been revolutionary during the last decade. This development was facilitated by combining earlier ranging lidar discoveries [1–5], with experience obtained from full-waveform ranging radar [6,7] to new airborne laser scanning systems which had components such as a GNSS receiver (Global Navigation Satellite System, IMU (Inertial Measurement Unit and a scanning mechanism. Since the first commercial ALS in 1994, new ALS-based forest inventory approaches have been reported feasible for operational activities [8–12]. ALS is currently operationally applied for stand level forest inventories, for example, in Nordic countries. In Finland alone, the adoption of ALS for forest data collection has led to an annual savings of around 20 M€/year, and the work is mainly done by companies instead of governmental organizations. In spite of the long implementation times and there being a limited tradition of making changes in the forest sector, laser scanning was commercially and operationally applied after about only one decade of research. When analyzing high-ranked journal papers from ISI Web of Science, the topic of laser scanning of forests has been the driving force for the whole laser scanning research society over the last decade. Thus, the topic “laser scanning in forests” has provided a significant industrial, societal and scientific impact. [...

  12. Efecto de un tratamiento intensivo con insulina sobre la reactividad plaquetaria en pacientes con hiperglucemia que ingresan con un síndrome coronario agudo

    OpenAIRE

    Vivas Balcones, Luis David

    2011-01-01

    El objetivo primario de este trabajo ha sido la valoración del efecto que produce el control estricto de la glucemia mediante un tratamiento intensivo y precoz con insulina sobre la reactividad plaquetaria durante la fase hospitalaria en pacientes que ingresan en una unidad de cuidados intensivos cardiológicos con un síndrome coronario agudo e hiperglucemia, respecto a un tratamiento convencional.

  13. Reverse spontaneous laser line sweeping in ytterbium fiber laser

    Czech Academy of Sciences Publication Activity Database

    Navrátil, Petr; Peterka, Pavel; Honzátko, Pavel; Kubeček, V.

    2017-01-01

    Roč. 14, č. 3 (2017), č. článku 035102. ISSN 1612-2011 R&D Projects: GA ČR(CZ) GA16-13306S Institutional support: RVO:67985882 ; RVO:68378271 Keywords : laser line sweeping * ytterbium * fiber lasers Subject RIV: BH - Optics, Masers, Lasers; BH - Optics, Masers, Lasers (FZU-D) OBOR OECD: Optics (including laser optics and quantum optics); Optics (including laser optics and quantum optics) (FZU-D) Impact factor: 2.537, year: 2016

  14. Infliximab en pacientes con enfermedad ocular inflamatoria, refractarios a DARMES

    Directory of Open Access Journals (Sweden)

    Elmer R. García-Salazar

    2013-07-01

    Full Text Available Se describe la experiencia con infliximab (anticuerpo monoclonal con una potente acción antiinflamatoria en el tratamiento de enfermedades oculares inflamatorias secundarias a patologías reumáticas y refractarias a drogas antirreumáticas modificadoras de la enfermedad (DARMES. Se evaluó el caso de una paciente de 50 años con artritis reumatoide (AR de fondo activo y una paciente de 37 años con vasculitis anticuerpos anticitoplasma de neutrófilos especifico para mieloperoxidasa (ANCA MPO sin compromiso de órgano noble, ambas con escleritis bilateral y perforación con prolapso de iris del ojo izquierdo. Ellas recibieron infliximab EV en dosis de 3 a 5 mg/kg/dosis, según el esquema, a las 0, 2, 6 y 8 semanas. Infliximab resultó eficaz y seguro para el tratamiento de escleritis asociada a AR y vasculitis ANCA MPO positivo, refractaria a tratamiento con DARMES y corticoides en dosis altas. Los injertos de tejido esclerocorneal evolucionaron favorablemente con infliximab.

  15. Trazando la materia oscura con cúmulos globulares

    Science.gov (United States)

    Forte, J. C.

    Se describe la estrategia adoptada para mapear la distribución de materia oscura y bariónica en galaxias elípticas cuyos cúmulos globulares están siendo observados con los telescopios VLT y Gemini. Se ejemplifican los resultados con los datos obtenidos en el cúmulo de Fornax.

  16. Colaboración con empresa de tasaciones

    OpenAIRE

    CASTILLO MORCILLO, JUAN

    2011-01-01

    Convenios con empresas de tasaciones y valoraciones. El objeto del proyecto es conseguir aprender y dominar el proceso de valoración de los distintos tipos de inmuebles urbanos mediante el cumplimiento de la Orden ministerial ECO/805/2003 Castillo Morcillo, J. (2011). Colaboración con empresa de tasaciones. http://hdl.handle.net/10251/11933. Archivo delegado

  17. ConsExpo - Consumer Exposure and Uptake Models -Program Manual

    NARCIS (Netherlands)

    Delmaar JE; Park MVDZ; Engelen JGM van; SIR

    2006-01-01

    This report provides guidance to the use of ConsExpo 4.0, successor to ConsExpo 3.0, a computer program that was developed to assist in the exposure assessment of compounds in non-food consumer products. The wide range of available consumer products is associated with an even wider variation in

  18. RoboCon: A general purpose telerobotic control center

    International Nuclear Information System (INIS)

    Draper, J.V.; Noakes, M.W.; Blair, L.M.

    1997-01-01

    This report describes human factors issues involved in the design of RoboCon, a multi-purpose control center for use in US Department of Energy remote handling applications. RoboCon is intended to be a flexible, modular control center capable of supporting a wide variety of robotic devices

  19. RoboCon: A general purpose telerobotic control center

    Energy Technology Data Exchange (ETDEWEB)

    Draper, J.V.; Noakes, M.W. [Oak Ridge National Lab., TN (United States). Robotics and Process Systems Div.; Schempf, H. [Carnegie Mellon Univ., Pittsburgh, PA (United States); Blair, L.M. [Human Machine Interfaces, Inc., Knoxville, TN (United States)

    1997-02-01

    This report describes human factors issues involved in the design of RoboCon, a multi-purpose control center for use in US Department of Energy remote handling applications. RoboCon is intended to be a flexible, modular control center capable of supporting a wide variety of robotic devices.

  20. Games Con Men Play: The Semiosis of Deceptive Interaction.

    Science.gov (United States)

    Hankiss, Agnes

    1980-01-01

    Analyzes some of the most frequent deceptive interactions as rendered through case histories of male con artists and their victims taken from police records. Discusses the recurrent elements in both the con-games strategies and victims' way of interpreting those strategies. (JMF)