WorldWideScience

Sample records for computer-based systems important

  1. Computer-based systems important to safety (COMPSIS) - Reporting guidelines

    International Nuclear Information System (INIS)

    1999-07-01

    The objective of this procedure is to help the user to prepare an COMPSIS report on an event so that important lessons learned are most efficiently transferred to the database. This procedure focuses on the content of the information to be provided in the report rather than on its format. The established procedure follows to large extend the procedure chosen by the IRS incident reporting system. However this database is built for I and C equipment with the purpose of the event report database to collect and disseminate information on events of significance involving Computer-Based Systems important to safety in nuclear power plants, and feedback conclusions and lessons learnt from such events. For events where human performance is dominant to draw lessons, more detailed guidance on the specific information that should be supplied is spelled out in the present procedure. This guidance differs somewhat from that for the provision of technical information, and takes into account that the engineering world is usually less familiar with human behavioural analysis than with technical analysis. The events to be reported to the COMPSIS database should be based on the national reporting criteria in the participating member countries. The aim is that all reports including computer based systems that meet each country reporting criteria should be reported. The database should give a broad picture of events/incidents occurring in operation with computer control systems. As soon as an event has been identified, the insights and lessons learnt to be conveyed to the international nuclear community shall be clearly identified. On the basis of the description of the event, the event shall be analyzed in detail under the aspect of direct and potential impact to plant safety functions. The first part should show the common involvement of operation and safety systems and the second part should show the special aspects of I and C functions, hardware and software

  2. Software for computer based systems important to safety in nuclear power plants. Safety guide

    International Nuclear Information System (INIS)

    2004-01-01

    Computer based systems are of increasing importance to safety in nuclear power plants as their use in both new and older plants is rapidly increasing. They are used both in safety related applications, such as some functions of the process control and monitoring systems, as well as in safety critical applications, such as reactor protection or actuation of safety features. The dependability of computer based systems important to safety is therefore of prime interest and should be ensured. With current technology, it is possible in principle to develop computer based instrumentation and control systems for systems important to safety that have the potential for improving the level of safety and reliability with sufficient dependability. However, their dependability can be predicted and demonstrated only if a systematic, fully documented and reviewable engineering process is followed. Although a number of national and international standards dealing with quality assurance for computer based systems important to safety have been or are being prepared, internationally agreed criteria for demonstrating the safety of such systems are not generally available. It is recognized that there may be other ways of providing the necessary safety demonstration than those recommended here. The basic requirements for the design of safety systems for nuclear power plants are provided in the Requirements for Design issued in the IAEA Safety Standards Series.The IAEA has issued a Technical Report to assist Member States in ensuring that computer based systems important to safety in nuclear power plants are safe and properly licensed. The report provides information on current software engineering practices and, together with relevant standards, forms a technical basis for this Safety Guide. The objective of this Safety Guide is to provide guidance on the collection of evidence and preparation of documentation to be used in the safety demonstration for the software for computer based

  3. Software for computer based systems important to safety in nuclear power plants. Safety guide

    International Nuclear Information System (INIS)

    2005-01-01

    Computer based systems are of increasing importance to safety in nuclear power plants as their use in both new and older plants is rapidly increasing. They are used both in safety related applications, such as some functions of the process control and monitoring systems, as well as in safety critical applications, such as reactor protection or actuation of safety features. The dependability of computer based systems important to safety is therefore of prime interest and should be ensured. With current technology, it is possible in principle to develop computer based instrumentation and control systems for systems important to safety that have the potential for improving the level of safety and reliability with sufficient dependability. However, their dependability can be predicted and demonstrated only if a systematic, fully documented and reviewable engineering process is followed. Although a number of national and international standards dealing with quality assurance for computer based systems important to safety have been or are being prepared, internationally agreed criteria for demonstrating the safety of such systems are not generally available. It is recognized that there may be other ways of providing the necessary safety demonstration than those recommended here. The basic requirements for the design of safety systems for nuclear power plants are provided in the Requirements for Design issued in the IAEA Safety Standards Series.The IAEA has issued a Technical Report to assist Member States in ensuring that computer based systems important to safety in nuclear power plants are safe and properly licensed. The report provides information on current software engineering practices and, together with relevant standards, forms a technical basis for this Safety Guide. The objective of this Safety Guide is to provide guidance on the collection of evidence and preparation of documentation to be used in the safety demonstration for the software for computer based

  4. Software for computer based systems important to safety in nuclear power plants. Safety guide

    International Nuclear Information System (INIS)

    2000-01-01

    Computer based systems are of increasing importance to safety in nuclear power plants as their use in both new and older plants is rapidly increasing. They are used both in safety related applications, such as some functions of the process control and monitoring systems, as well as in safety critical applications, such as reactor protection or actuation of safety features. The dependability of computer based systems important to safety is therefore of prime interest and should be ensured. With current technology, it is possible in principle to develop computer based instrumentation and control systems for systems important to safety that have the potential for improving the level of safety and reliability with sufficient dependability. However, their dependability can be predicted and demonstrated only if a systematic, fully documented and reviewable engineering process is followed. Although a number of national and international standards dealing with quality assurance for computer based systems important to safety have been or are being prepared, internationally agreed criteria for demonstrating the safety of such systems are not generally available. It is recognized that there may be other ways of providing the necessary safety demonstration than those recommended here. The basic requirements for the design of safety systems for nuclear power plants are provided in the Requirements for Design issued in the IAEA Safety Standards Series.The IAEA has issued a Technical Report to assist Member States in ensuring that computer based systems important to safety in nuclear power plants are safe and properly licensed. The report provides information on current software engineering practices and, together with relevant standards, forms a technical basis for this Safety Guide. The objective of this Safety Guide is to provide guidance on the collection of evidence and preparation of documentation to be used in the safety demonstration for the software for computer based

  5. Reliability analysis of microcomputer boards and computer based systems important to safety of nuclear plants

    International Nuclear Information System (INIS)

    Shrikhande, S.V.; Patil, V.K.; Ganesh, G.; Biswas, B.; Patil, R.K.

    2010-01-01

    Computer Based Systems (CBS) are employed in Indian nuclear plants for protection, control and monitoring purpose. For forthcoming CBS, Reactor Control Division has designed and developed a new standardized family of microcomputer boards qualified to stringent requirements of nuclear industry. These boards form the basic building blocks of CBS. Reliability analysis of these boards is being carried out using analysis package based on MIL-STD-217Plus methodology. The estimated failure rate values of these standardized microcomputer boards will be useful for reliability assessment of these systems. The paper presents reliability analysis of microcomputer boards and case study of a CBS system built using these boards. (author)

  6. Computer Based Expert Systems.

    Science.gov (United States)

    Parry, James D.; Ferrara, Joseph M.

    1985-01-01

    Claims knowledge-based expert computer systems can meet needs of rural schools for affordable expert advice and support and will play an important role in the future of rural education. Describes potential applications in prediction, interpretation, diagnosis, remediation, planning, monitoring, and instruction. (NEC)

  7. Outline of the requirements of application of computer based instrumentation and control systems in the systems important to safety on Bohunice NPPs

    International Nuclear Information System (INIS)

    Bacurik, J.

    1997-01-01

    The most important regulatory requirements and issues are described related to the review, evaluation and assessment of computer-based safety-related IandC systems, with emphasis on safety instrumentation and control. These aspects include safety classification and categorization of IandC, ranking of applicable codes and standards, design evaluation on the system level, and software assessment. (author)

  8. Application of the defense-in-depth concept to qualify computer-based instrumentation and control systems important to safety

    International Nuclear Information System (INIS)

    Seidel, F.

    1998-01-01

    In parallel to the technological development, the authorities and expert organisations are preparing the application of computer-based I and C to NPPs from the regulatory point of view. Generally the associated world-wide procedure follows steps like identification of safety issues, completion of the regulatory framework particularly regarding the licensing requirements and furthermore, recommendation of an appropriate set of qualification methods to prove that the requirements are met. The paper's intention is to show from the regulatory point of view that the choice as well as the combination of the qualification methods depend on system design features and development strategy. Similar as for the safety system design required, a defense-in-depth qualification concept is suggested to be helpful in order to prove that the computer-based system meets the licensing requirements. (author)

  9. Application of the defense-in-depth concept to qualify computer-based instrumentation and control systems important to safety

    Energy Technology Data Exchange (ETDEWEB)

    Seidel, F [Federal Office for Radiation Protection, Salzgitter (Germany)

    1998-10-01

    In parallel to the technological development, the authorities and expert organisations are preparing the application of computer-based I and C to NPPs from the regulatory point of view. Generally the associated world-wide procedure follows steps like identification of safety issues, completion of the regulatory framework particularly regarding the licensing requirements and furthermore, recommendation of an appropriate set of qualification methods to prove that the requirements are met. The paper`s intention is to show from the regulatory point of view that the choice as well as the combination of the qualification methods depend on system design features and development strategy. Similar as for the safety system design required, a defense-in-depth qualification concept is suggested to be helpful in order to prove that the computer-based system meets the licensing requirements. (author)

  10. Operating and maintenance experience with computer-based systems in nuclear power plants - A report by the PWG-1 Task Group on Computer-based Systems Important to Safety

    International Nuclear Information System (INIS)

    1998-01-01

    This report was prepared by the Task Group on Computer-based Systems Important to Safety of the Principal Working Group No. 1. Canada had a leading role in this study. Operating and Maintenance Experience with Computer-based Systems in nuclear power plants is essential for improving and upgrading against potential failures. The present report summarises the observations and findings related to the use of digital technology in nuclear power plants. It also makes recommendations for future activities in Member Countries. Continued expansion of digital technology in nuclear power reactor has resulted in new safety and licensing issues, since the existing licensing review criteria were mainly based on the analogue devices used when the plants were designed. On the industry side, a consensus approach is needed to help stabilise and standardise the treatment of digital installations and upgrades while ensuring safety and reliability. On the regulatory side, new guidelines and regulatory requirements are needed to assess digital upgrades. Upgrades or new installation issues always involve potential for system failures. They are addressed specifically in the 'hazard' or 'failure' analysis, and it is in this context that they ultimately are resolved in the design and addressed in licensing. Failure Analysis is normally performed in parallel with the design, verification and validation (V and V), and implementation activities of the upgrades. Current standards and guidelines in France, U.S. and Canada recognise the importance of failure analysis in computer-based system design. Thus failure analysis is an integral part of the design and implementation process and is aimed at evaluating potential failure modes and cause of system failures. In this context, it is essential to define 'System' as the plant system affected by the upgrade, not the 'Computer' system. The identified failures would provide input to the design process in the form of design requirements or design

  11. MTA Computer Based Evaluation System.

    Science.gov (United States)

    Brenner, Lisa P.; And Others

    The MTA PLATO-based evaluation system, which has been implemented by a consortium of schools of medical technology, is designed to be general-purpose, modular, data-driven, and interactive, and to accommodate other national and local item banks. The system provides a comprehensive interactive item-banking system in conjunction with online student…

  12. Computer-Based Wireless Advertising Communication System

    Directory of Open Access Journals (Sweden)

    Anwar Al-Mofleh

    2009-10-01

    Full Text Available In this paper we developed a computer based wireless advertising communication system (CBWACS that enables the user to advertise whatever he wants from his own office to the screen in front of the customer via wireless communication system. This system consists of two PIC microcontrollers, transmitter, receiver, LCD, serial cable and antenna. The main advantages of the system are: the wireless structure and the system is less susceptible to noise and other interferences because it uses digital communication techniques.

  13. A computer-based purchase management system

    International Nuclear Information System (INIS)

    Kuriakose, K.K.; Subramani, M.G.

    1989-01-01

    The details of a computer-based purchase management system developed to meet the specific requirements of Madras Regional Purchase Unit (MRPU) is given. Howe ver it can be easily modified to meet the requirements of any other purchase department. It covers various operations of MRPU starting from indent processing to preparation of purchase orders and reminders. In order to enable timely management action and control facilities are provided to generate the necessary management information reports. The scope for further work is also discussed. The system is completely menu driven and user friendly. Appendix A and B contains the menu implemented and the sample outputs respectively. (author)

  14. ARGOS-NT: A computer based emergency management system

    International Nuclear Information System (INIS)

    Hoe, S.; Thykier-Nielsen, S.; Steffensen, L.B.

    2000-01-01

    In case of a nuclear accident or a threat of a release the Danish Emergency Management Agency is responsible for actions to minimize the consequences in Danish territory. To provide an overview of the situation, a computer based system called ARGOS-NT has been developed in 1993/94. This paper gives an overview of the system with emphasis on the prognostic part of the system. An example calculation shows the importance of correct landscape modeling. (author)

  15. COMPUTER-BASED REASONING SYSTEMS: AN OVERVIEW

    Directory of Open Access Journals (Sweden)

    CIPRIAN CUCU

    2012-12-01

    Full Text Available Argumentation is nowadays seen both as skill that people use in various aspects of their lives, as well as an educational technique that can support the transfer or creation of knowledge thus aiding in the development of other skills (e.g. Communication, critical thinking or attitudes. However, teaching argumentation and teaching with argumentation is still a rare practice, mostly due to the lack of available resources such as time or expert human tutors that are specialized in argumentation. Intelligent Computer Systems (i.e. Systems that implement an inner representation of particular knowledge and try to emulate the behavior of humans could allow more people to understand the purpose, techniques and benefits of argumentation. The proposed paper investigates the state of the art concepts of computer-based argumentation used in education and tries to develop a conceptual map, showing benefits, limitation and relations between various concepts focusing on the duality “learning to argue – arguing to learn”.

  16. Expert systems and computer based industrial systems

    International Nuclear Information System (INIS)

    Dunand, R.

    1989-01-01

    Framentec is the artificial intelligence subsidiary of FRAMATOME. It is involved in expert-system activities of Shells, developments, methodology and software for maintenance (Maintex) and consulting and methodology. Specific applications in the nuclear field are presented. The first is an expert system to assist in the piping support design prototype, the second is an expert system that assists an ultrasonic testing operator in determining the nature of a welding defect and the third is a welding machine diagnosis advisor. Maintex is a software tool to provide assistance in the repair of complex industrial equipment. (author)

  17. An Interactive Computer-Based Circulation System: Design and Development

    Directory of Open Access Journals (Sweden)

    James S. Aagaard

    1972-03-01

    Full Text Available An on-line computer-based circulation control system has been installed at the Northwestern University library. Features of the system include self-service book charge, remote terminal inquiry and update, and automatic production of notices for call-ins and books available. Fine notices are also prepared daily and overdue notices weekly. Important considerations in the design of the system were to minimize costs of operation and to include technical services functions eventually. The system operates on a relatively small computer in a multiprogrammed mode.

  18. Computer-based radionuclide analyzer system

    International Nuclear Information System (INIS)

    Ohba, Kengo; Ishizuka, Akira; Kobayashi, Akira; Ohhashi, Hideaki; Tsuruoka, Kimitoshi.

    1978-01-01

    The radionuclide analysis in nuclear power plants, practiced for the purpose of monitoring the quality of the primary loop water, the confirmation of the performance of reactor cleanup system and monitoring the radioactive waste effluent, is an important job. Important as it is, it requires considerable labor of experts, because the samples to be analyzed are multifarious and very large in number, and in addition, this job depends much on manual work. With a view of saving the labor, simplifying and standardizing the work, reducing radiation exposure, and automatizing the work of analysis, the computerized analyzer system has been worked out. The results of its performance test at the operating power plant have proved that the development has fairly accomplished the objects and that the system is well useful. The developmental work was carried out by the cooperation between The Tokyo Electric Power Co. and Toshiba in about 4 years from 1974 to this year. (auth.)

  19. Evaluation of computer-based ultrasonic inservice inspection systems

    International Nuclear Information System (INIS)

    Harris, R.V. Jr.; Angel, L.J.; Doctor, S.R.; Park, W.R.; Schuster, G.J.; Taylor, T.T.

    1994-03-01

    This report presents the principles, practices, terminology, and technology of computer-based ultrasonic testing for inservice inspection (UT/ISI) of nuclear power plants, with extensive use of drawings, diagrams, and LTT images. The presentation is technical but assumes limited specific knowledge of ultrasonics or computers. The report is divided into 9 sections covering conventional LTT, computer-based LTT, and evaluation methodology. Conventional LTT topics include coordinate axes, scanning, instrument operation, RF and video signals, and A-, B-, and C-scans. Computer-based topics include sampling, digitization, signal analysis, image presentation, SAFI, ultrasonic holography, transducer arrays, and data interpretation. An evaluation methodology for computer-based LTT/ISI systems is presented, including questions, detailed procedures, and test block designs. Brief evaluations of several computer-based LTT/ISI systems are given; supplementary volumes will provide detailed evaluations of selected systems

  20. Personal computer based home automation system

    OpenAIRE

    Hellmuth, George F.

    1993-01-01

    The systems engineering process is applied in the development of the preliminary design of a home automation communication protocol. The objective of the communication protocol is to provide a means for a personal computer to communicate with adapted appliances in the home. A needs analysis is used to ascertain that a need exist for a home automation system. Numerous design alternatives are suggested and evaluated to determine the best possible protocol design. Coaxial cable...

  1. Prestandardisation Activities for Computer Based Safety Systems

    DEFF Research Database (Denmark)

    Taylor, J. R.; Bologna, S.; Ehrenberger, W.

    1981-01-01

    . The Commission of the european Community supports the work. Major topics comprise hardware configuration and self supervision, software design, verification and testing, documentation, system specification and concurrent processing. Preliminary results have been used for the draft of an IEC standard and for some...

  2. Micro-computer based communication system

    International Nuclear Information System (INIS)

    Meyers, M.; Hinton, C.; Pauly, C.; Tau, S.; Rathmell, R.

    1981-01-01

    The CNEA 20UD tandem accelerator manufactured by National Electrostatics Corp. is predominately controlled through a hard wired console. In the past, accelerators have used mechanical control rods to control parameters inside the high voltage terminals and dead sections. The 20UD column, has relatively complex equipment within the terminal and dead sections. Because of its complexity and the length of the column (approximately 48 ft. from ground to terminal) it was concluded that a digital communication link would be required to provide the smooth, high resolution control needed for the ion-optic components and to provide a reliable system to monitor the large number of parameters. To further ensure reliability, some basic components such as foil strippers and the terminal matching quadrupole have back-up control via control rods to allow limited operation in the event of a failure of the digital system

  3. Industrial Personal Computer based Display for Nuclear Safety System

    International Nuclear Information System (INIS)

    Kim, Ji Hyeon; Kim, Aram; Jo, Jung Hee; Kim, Ki Beom; Cheon, Sung Hyun; Cho, Joo Hyun; Sohn, Se Do; Baek, Seung Min

    2014-01-01

    The safety display of nuclear system has been classified as important to safety (SIL:Safety Integrity Level 3). These days the regulatory agencies are imposing more strict safety requirements for digital safety display system. To satisfy these requirements, it is necessary to develop a safety-critical (SIL 4) grade safety display system. This paper proposes industrial personal computer based safety display system with safety grade operating system and safety grade display methods. The description consists of three parts, the background, the safety requirements and the proposed safety display system design. The hardware platform is designed using commercially available off-the-shelf processor board with back plane bus. The operating system is customized for nuclear safety display application. The display unit is designed adopting two improvement features, i.e., one is to provide two separate processors for main computer and display device using serial communication, and the other is to use Digital Visual Interface between main computer and display device. In this case the main computer uses minimized graphic functions for safety display. The display design is at the conceptual phase, and there are several open areas to be concreted for a solid system. The main purpose of this paper is to describe and suggest a methodology to develop a safety-critical display system and the descriptions are focused on the safety requirement point of view

  4. Industrial Personal Computer based Display for Nuclear Safety System

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Ji Hyeon; Kim, Aram; Jo, Jung Hee; Kim, Ki Beom; Cheon, Sung Hyun; Cho, Joo Hyun; Sohn, Se Do; Baek, Seung Min [KEPCO, Youngin (Korea, Republic of)

    2014-08-15

    The safety display of nuclear system has been classified as important to safety (SIL:Safety Integrity Level 3). These days the regulatory agencies are imposing more strict safety requirements for digital safety display system. To satisfy these requirements, it is necessary to develop a safety-critical (SIL 4) grade safety display system. This paper proposes industrial personal computer based safety display system with safety grade operating system and safety grade display methods. The description consists of three parts, the background, the safety requirements and the proposed safety display system design. The hardware platform is designed using commercially available off-the-shelf processor board with back plane bus. The operating system is customized for nuclear safety display application. The display unit is designed adopting two improvement features, i.e., one is to provide two separate processors for main computer and display device using serial communication, and the other is to use Digital Visual Interface between main computer and display device. In this case the main computer uses minimized graphic functions for safety display. The display design is at the conceptual phase, and there are several open areas to be concreted for a solid system. The main purpose of this paper is to describe and suggest a methodology to develop a safety-critical display system and the descriptions are focused on the safety requirement point of view.

  5. An Intelligent Computer-Based System for Sign Language Tutoring

    Science.gov (United States)

    Ritchings, Tim; Khadragi, Ahmed; Saeb, Magdy

    2012-01-01

    A computer-based system for sign language tutoring has been developed using a low-cost data glove and a software application that processes the movement signals for signs in real-time and uses Pattern Matching techniques to decide if a trainee has closely replicated a teacher's recorded movements. The data glove provides 17 movement signals from…

  6. Computer Based Asset Management System For Commercial Banks

    Directory of Open Access Journals (Sweden)

    Amanze

    2015-08-01

    Full Text Available ABSTRACT The Computer-based Asset Management System is a web-based system. It allows commercial banks to keep track of their assets. The most advantages of this system are the effective management of asset by keeping records of the asset and retrieval of information. In this research I gather the information to define the requirements of the new application and look at factors how commercial banks managed their asset.

  7. Fail-safe computer-based plant protection systems

    International Nuclear Information System (INIS)

    Keats, A.B.

    1983-01-01

    A fail-safe mode of operation for computers used in nuclear reactor protection systems was first evolved in the UK for application to a sodium cooled fast reactor. The fail-safe properties of both the hardware and the software were achieved by permanently connecting test signals to some of the multiplexed inputs. This results in an unambiguous data pattern, each time the inputs are sequentially scanned by the multiplexer. The ''test inputs'' simulate transient excursions beyond defined safe limits. The alternating response of the trip algorithms to the ''out-of-limits'' test signals and the normal plant measurements is recognised by hardwired pattern recognition logic external to the computer system. For more general application to plant protection systems, a ''Test Signal Generator'' (TSG) is used to compute and generate test signals derived from prevailing operational conditions. The TSG, from its knowledge of the sensitivity of the trip algorithm to each of the input variables, generates a ''test disturbance'' which is superimposed upon each variable in turn, to simulate a transient excursion beyond the safe limits. The ''tripped'' status yielded by the trip algorithm when using data from a ''disturbed'' input forms part of a pattern determined by the order in which the disturbances are applied to the multiplexer inputs. The data pattern formed by the interleaved test disturbances is again recognised by logic external to the protection system's computers. This fail-safe mode of operation of computer-based protection systems provides a powerful defence against common-mode failure. It also reduces the importance of software verification in the licensing procedure. (author)

  8. Industrial application of a graphics computer-based training system

    International Nuclear Information System (INIS)

    Klemm, R.W.

    1985-01-01

    Graphics Computer Based Training (GCBT) roles include drilling, tutoring, simulation and problem solving. Of these, Commonwealth Edison uses mainly tutoring, simulation and problem solving. These roles are not separate in any particular program. They are integrated to provide tutoring and part-task simulation, part-task simulation and problem solving, or problem solving tutoring. Commonwealth's Graphics Computer Based Training program was a result of over a year's worth of research and planning. The keys to the program are it's flexibility and control. Flexibility is maintained through stand alone units capable of program authoring and modification for plant/site specific users. Yet, the system has the capability to support up to 31 terminals with a 40 mb hard disk drive. Control of the GCBT program is accomplished through establishment of development priorities and a central development facility (Commonwealth Edison's Production Training Center)

  9. Computer-based information management system for interventional radiology

    International Nuclear Information System (INIS)

    Forman, B.H.; Silverman, S.G.; Mueller, P.R.; Hahn, P.F.; Papanicolaou, N.; Tung, G.A.; Brink, J.A.; Ferrucci, J.T.

    1989-01-01

    The authors authored and implemented a computer-based information management system (CBIMS) for the integrated analysis of data from a variety of abdominal nonvascular interventional procedures. The CBIMS improved on their initial handwritten-card system (which listed only patient name, hospital number, and type of procedure) by capturing relevant patient data in an organized fashion and integrating information for meaningful analysis. Advantages of CBIMS include enhanced compilation of monthly census, easy access to a patient's interventional history, and flexible querying capability that allows easy extraction of subsets of information from the patient database

  10. Computer-based control systems of nuclear power plants

    International Nuclear Information System (INIS)

    Kalashnikov, V.K.; Shugam, R.A.; Ol'shevsky, Yu.N.

    1975-01-01

    Computer-based control systems of nuclear power plants may be classified into those using computers for data acquisition only, those using computers for data acquisition and data processing, and those using computers for process control. In the present paper a brief review is given of the functions the systems above mentioned perform, their applications in different nuclear power plants, and some of their characteristics. The trend towards hierarchic systems using control computers with reserves already becomes clear when consideration is made of the control systems applied in the Canadian nuclear power plants that pertain to the first ones equipped with process computers. The control system being now under development for the large Soviet reactors of WWER type will also be based on the use of control computers. That part of the system concerned with controlling the reactor assembly is described in detail

  11. Computer based C and I systems in Indian PHWRs

    International Nuclear Information System (INIS)

    Govindarajan, G.; Sharma, M.P.

    1997-01-01

    Benefits of programmable digital technology have been well recognized and employment of computer based systems in Indian PHWRs has evolved in a phased manner, keeping in view the regulatory requirements for their use. In the initial phase some operator information functions and control of on-power fuel handling system were implemented and then some systems performing control and safety functions have been employed. The availability of powerful microcomputer hardware at reasonable cost and indigenous capability in design and execution has encouraged wider use of digital technology in the nuclear power programme. To achieve the desired level of quality and reliability, the hardware modules for the implementation of these systems in the plants under construction, have been standardized and methodology for software verification and validation has been evolved. A large number of C and I functions including those for equipment diagnostics are being implemented. The paper describes the various applications of computers in Indian NPPs and their current status of implementation. (author)

  12. Computer-based systems for nuclear power stations

    International Nuclear Information System (INIS)

    Humble, P.J.; Welbourne, D.; Belcher, G.

    1995-01-01

    The published intentions of vendors are for extensive touch-screen control and computer-based protection. The software features needed for acceptance in the UK are indicated. The defence in depth needed is analyzed. Current practice in aircraft flight control systems and the software methods available are discussed. Software partitioning and mathematically formal methods are appropriate for the structures and simple logic needed for nuclear power applications. The potential for claims of diversity and independence between two computer-based subsystems of a protection system is discussed. Features needed to meet a single failure criterion applied to software are discussed. Conclusions are given on the main factors which a design should allow for. The work reported was done for the Health and Safety Executive of the UK (HSE), and acknowledgement is given to them, to NNC Ltd and to GEC-Marconi Avionics Ltd for permission to publish. The opinions and recommendations expressed are those of the authors and do not necessarily reflect those of HSE. (Author)

  13. A Cloud Computing Based Patient Centric Medical Information System

    Science.gov (United States)

    Agarwal, Ankur; Henehan, Nathan; Somashekarappa, Vivek; Pandya, A. S.; Kalva, Hari; Furht, Borko

    This chapter discusses an emerging concept of a cloud computing based Patient Centric Medical Information System framework that will allow various authorized users to securely access patient records from various Care Delivery Organizations (CDOs) such as hospitals, urgent care centers, doctors, laboratories, imaging centers among others, from any location. Such a system must seamlessly integrate all patient records including images such as CT-SCANS and MRI'S which can easily be accessed from any location and reviewed by any authorized user. In such a scenario the storage and transmission of medical records will have be conducted in a totally secure and safe environment with a very high standard of data integrity, protecting patient privacy and complying with all Health Insurance Portability and Accountability Act (HIPAA) regulations.

  14. Safety applications of computer based systems for the process industry

    International Nuclear Information System (INIS)

    Bologna, Sandro; Picciolo, Giovanni; Taylor, Robert

    1997-11-01

    Computer based systems, generally referred to as Programmable Electronic Systems (PESs) are being increasingly used in the process industry, also to perform safety functions. The process industry as they intend in this document includes, but is not limited to, chemicals, oil and gas production, oil refining and power generation. Starting in the early 1970's the wide application possibilities and the related development problems of such systems were recognized. Since then, many guidelines and standards have been developed to direct and regulate the application of computers to perform safety functions (EWICS-TC7, IEC, ISA). Lessons learnt in the last twenty years can be summarised as follows: safety is a cultural issue; safety is a management issue; safety is an engineering issue. In particular, safety systems can only be properly addressed in the overall system context. No single method can be considered sufficient to achieve the safety features required in many safety applications. Good safety engineering approach has to address not only hardware and software problems in isolation but also their interfaces and man-machine interface problems. Finally, the economic and industrial aspects of the safety applications and development of PESs in process plants are evidenced throughout all the Report. Scope of the Report is to contribute to the development of an adequate awareness of these problems and to illustrate technical solutions applied or being developed

  15. The Importance of Computer Based Active Learning for Basic Chemistry in Vocational High Schools

    Directory of Open Access Journals (Sweden)

    Tuğçe GÜNTER

    2011-01-01

    Full Text Available Chemistry is a very comprehensive discipline that researches atoms; molecules; the structure of matter in the form of element or compound; combinations, and physical and chemical properties of matter; macroscopic and microscopic transformations of matters; the energy and entropy released or absorbed in the course of these transformations; the structures and functions of carbohydrates, lipids, proteins, enzymes, vitamins and minerals in the body. This discipline includes numerous reactions at the macroscopic, microscopic and particulate levels, abstract concepts, three-dimensional structure of molecules, mathematics, and graphics. It is important for students to be trained as scientists to internalize -with meaningful learning - chemistry having much abstract concepts. Especially for students in associate degree programs in Vocational High Schools, taking this integrated course will provide them to be more creative in their future professional work; to cope with and overcome analytical problems; to be self-learners; to fill the gaps concerning chemical analysis originated from secondary education; and to gain critical thinking and self-evaluation skills regarding chemical problems. In the age of developing science and technology, “Computer-Based Active Learning Method” emerged with the introduction of multi-media into education and training. In this context, students will learn difficult and complex mathematical operations and graphics interpretations more meaningfully with computer-based simulations and analogies.

  16. Customizable Computer-Based Interaction Analysis for Coaching and Self-Regulation in Synchronous CSCL Systems

    Science.gov (United States)

    Lonchamp, Jacques

    2010-01-01

    Computer-based interaction analysis (IA) is an automatic process that aims at understanding a computer-mediated activity. In a CSCL system, computer-based IA can provide information directly to learners for self-assessment and regulation and to tutors for coaching support. This article proposes a customizable computer-based IA approach for a…

  17. Expert-systems and computer-based industrial systems

    International Nuclear Information System (INIS)

    Terrien, J.F.

    1987-01-01

    Framatome makes wide use of expert systems, computer-assisted engineering, production management and personnel training. It has set up separate business units and subsidiaries and also participates in other companies which have the relevant expertise. Five examples of the products and services available in these are discussed. These are in the field of applied artificial intelligence and expert-systems, in integrated computer-aid design and engineering, structural analysis, computer-related products and services and document management systems. The structure of the companies involved and the work they are doing is discussed. (UK)

  18. Evaluation of Computer-Based Procedure System Prototype

    Energy Technology Data Exchange (ETDEWEB)

    Johanna Oxstrand; Katya Le Blanc; Seth Hays

    2012-09-01

    This research effort is a part of the Light-Water Reactor Sustainability (LWRS) Program, which is a research and development (R&D) program sponsored by Department of Energy (DOE), performed in close collaboration with industry R&D programs, to provide the technical foundations for licensing and managing the long-term, safe, and economical operation of current nuclear power plants. The LWRS program serves to help the U.S. nuclear industry adopt new technologies and engineering solutions that facilitate the continued safe operation of the plants and extension of the current operating licenses. The introduction of advanced technology in existing nuclear power plants may help to manage the effects of aging systems, structures, and components. In addition, the incorporation of advanced technology in the existing LWR fleet may entice the future workforce, who will be familiar with advanced technology, to work for these utilities rather than more newly built nuclear power plants. Advantages are being sought by developing and deploying technologies that will increase safety and efficiency. One significant opportunity for existing plants to increase efficiency is to phase out the paper-based procedures (PBPs) currently used at most nuclear power plants and replace them, where feasible, with computer-based procedures (CBPs). PBPs have ensured safe operation of plants for decades, but limitations in paper-based systems do not allow them to reach the full potential for procedures to prevent human errors. The environment in a nuclear power plant is constantly changing depending on current plant status and operating mode. PBPs, which are static by nature, are being applied to a constantly changing context. This constraint often results in PBPs that are written in a manner that is intended to cover many potential operating scenarios. Hence, the procedure layout forces the operator to search through a large amount of irrelevant information to locate the pieces of information

  19. The development of regulatory expectations for computer-based safety systems for the UK nuclear programme

    Energy Technology Data Exchange (ETDEWEB)

    Hughes, P. J. [HM Nuclear Installations Inspectorate Marine Engineering Submarines Defence Nuclear Safety Regulator Serco Assurance Redgrave Court, Merton Road, Bootle L20 7HS (United Kingdom); Westwood, R.N; Mark, R. T. [FLEET HQ, Leach Building, Whale Island, Portsmouth, PO2 8BY (United Kingdom); Tapping, K. [Serco Assurance,Thomson House, Risley, Warrington, WA3 6GA (United Kingdom)

    2006-07-01

    The Nuclear Installations Inspectorate (NII) of the UK's Health and Safety Executive (HSE) has completed a review of their Safety Assessment Principles (SAPs) for Nuclear Installations recently. During the period of the SAPs review in 2004-2005 the designers of future UK naval reactor plant were optioneering the control and protection systems that might be implemented. Because there was insufficient regulatory guidance available in the naval sector to support this activity the Defence Nuclear Safety Regulator (DNSR) invited the NII to collaborate with the production of a guidance document that provides clarity of regulatory expectations for the production of safety cases for computer based safety systems. A key part of producing regulatory expectations was identifying the relevant extant standards and sector guidance that reflect good practice. The three principal sources of such good practice were: IAEA Safety Guide NS-G-1.1 (Software for Computer Based Systems Important to Safety in Nuclear Power Plants), European Commission consensus document (Common Position of European Nuclear Regulators for the Licensing of Safety Critical Software for Nuclear Reactors) and IEC nuclear sector standards such as IEC60880. A common understanding has been achieved between the NII and DNSR and regulatory guidance developed which will be used by both NII and DNSR in the assessment of computer-based safety systems and in the further development of more detailed joint technical assessment guidance for both regulatory organisations. (authors)

  20. INFORMATION DISPLAY: CONSIDERATIONS FOR DESIGNING COMPUTER-BASED DISPLAY SYSTEMS

    International Nuclear Information System (INIS)

    O'HARA, J.M.; PIRUS, D.; BELTRATCCHI, L.

    2004-01-01

    This paper discussed the presentation of information in computer-based control rooms. Issues associated with the typical displays currently in use are discussed. It is concluded that these displays should be augmented with new displays designed to better meet the information needs of plant personnel and to minimize the need for interface management tasks (the activities personnel have to do to access and organize the information they need). Several approaches to information design are discussed, specifically addressing: (1) monitoring, detection, and situation assessment; (2) routine task performance; and (3) teamwork, crew coordination, collaborative work

  1. Developing a personal computer based expert system for radionuclide identification

    International Nuclear Information System (INIS)

    Aarnio, P.A.; Hakulinen, T.T.

    1990-01-01

    Several expert system development tools are available for personal computers today. We have used one of the LISP-based high end tools for nearly two years in developing an expert system for identification of gamma sources. The system contains a radionuclide database of 2055 nuclides and 48000 gamma transitions with a knowledge base of about sixty rules. This application combines a LISP-based inference engine with database management and relatively heavy numerical calculations performed using C-language. The most important feature needed has been the possibility to use LISP and C together with the more advanced object oriented features of the development tool. Main difficulties have been long response times and the big amount (10-16 MB) of computer memory required

  2. Failsafe design criteria for computer based reactor protection systems

    International Nuclear Information System (INIS)

    Keats, A.B.

    1980-01-01

    The design criteria proposed are an extrapolation of the failsafe mode of operation used in the UK in hardwired reactor protection systems. This is achieved by making the operational condition of the reactor dependent upon an energetic state of the protection system components. An important objective of the proposed design criteria is to eliminate, or at least to minimize, the need for a failure-mode-and-effect-analysis (FMEA) of the computer software. This demands some well defined but simple constraints upon the way in which data are stored in the computers, but the objective is achieved almost entirely by hardware properties of the system. The first of these is the systematic use of hardwired test inputs which cause transient excursions into the tripped state in a uniquely ordered but easily recognizable sequence. The second is the use of hardwired pattern recognition logic which generates a dynamic healthy stimulus for the shutdown actuators only in response to the unique sequence formed by the hardwired input signal pattern. It therefore detects abnormal states of any of the system inputs, software errors, wiring errors and hardware failures. This hardwired logic is conceptually simple, failsafe, and is amenable to simple FMEA. (U.K.)

  3. Evaluation of Revised Computer-Based Procedure System Prototype

    Energy Technology Data Exchange (ETDEWEB)

    Katya Le Blanc; Johanna Oxstrand; Cheradan Fikstad

    2013-01-01

    The nuclear power industry is very procedure driven, i.e. almost all activities that take place at a nuclear power plant are conducted by following procedures. The paper-based procedures (PBPs) currently used by the industry do a good job at keeping the industry safe. However, these procedures are most often paired with methods and tools put in place to anticipate, prevent, and catch errors related to hands-on work. These tools are commonly called human performance tools. The drawback with the current implementation of these tools is that the task of performing one procedure becomes time and labor intensive. For example, concurrent and independent verification of procedure steps are required at times, which essentially means that at least two people have to be actively involved in the task. Even though the current use of PBPs and human performance tools are keeping the industry safe, there is room for improvement. The industry could potentially increase their efficiency and safety by replacing their existing PBPs with CBPs. If implemented correctly, the CBP system could reduce the time and focus spent on using the human performance tools. Some of the tools can be completely incorporated in the CBP system in a manner that the performer does not think about the fact that these tools are being used. Examples of these tools are procedure use and adherence, placekeeping, and peer checks. Other tools can be partly integrated in a fashion that reduce the time and labor they require, such as concurrent and independent verification. The incorporation of advanced technology, such as CBP systems, may help to manage the effects of aging systems, structures, and components. The introduction of advanced technology may also make the existing LWR fleet more attractive to the future workforce, which will be of importance when the future workforce will chose between existing fleet and the newly built nuclear power plants.

  4. Safety integrity requirements for computer based I ampersand C systems

    International Nuclear Information System (INIS)

    Thuy, N.N.Q.; Ficheux-Vapne, F.

    1997-01-01

    In order to take into account increasingly demanding functional requirements, many instrumentation and control (I ampersand C) systems in nuclear power plants are implemented with computers. In order to ensure the required safety integrity of such equipment, i.e., to ensure that they satisfactorily perform the required safety functions under all stated conditions and within stated periods of time, requirements applicable to these equipment and to their life cycle need to be expressed and followed. On the other hand, the experience of the last years has led EDF (Electricite de France) and its partners to consider three classes of systems and equipment, according to their importance to safety. In the EPR project (European Pressurized water Reactor), these classes are labeled E1A, E1B and E2. The objective of this paper is to present the outline of the work currently done in the framework of the ETC-I (EPR Technical Code for I ampersand C) regarding safety integrity requirements applicable to each of the three classes. 4 refs., 2 figs

  5. Computer based core monitoring system for an operating CANDU reactor

    International Nuclear Information System (INIS)

    Yoon, Moon Young; Kwon, O Hwan; Kim, Kyung Hwa; Yeom, Choong Sub

    2004-01-01

    The research was performed to develop a CANDU-6 Core Monitoring System(CCMS) that enables operators to have efficient core management by monitoring core power distribution, burnup distribution, and the other important core variables and managing the past core history for Wolsong nuclear power plant unit 1. The CCMS uses Reactor Fueling Simulation Program(RFSP, developed by AECL) for continuous core calculation by integrating the algorithm and assumptions validated and uses the information taken from Digital Control Computer(DCC) for the purpose of producing basic input data. The CCMS has two modules; CCMS server program and CCMS client program. The CCMS server program performs automatic and continuous core calculation and manages overall output controlled by DataBase Management System. The CCMS client program enables users to monitor current and past core status in the predefined GUI(Graphic-User Interface) environment. For the purpose of verifying the effectiveness of CCMS, we compared field-test data with the data used for Wolsong unit 1 operation. In the verification the mean percent differences of both cases were the same(0.008%), which showed that the CCMS could monitor core behaviors well

  6. Concept of development of integrated computer - based control system for 'Ukryttia' object

    International Nuclear Information System (INIS)

    Buyal'skij, V.M.; Maslov, V.P.

    2003-01-01

    The structural concept of Chernobyl NPP 'Ukryttia' Object's integrated computer - based control system development is presented on the basis of general concept of integrated Computer - based Control System (CCS) design process for organizing and technical management subjects.The concept is aimed at state-of-the-art architectural design technique application and allows using modern computer-aided facilities for functional model,information (logical and physical) models development,as well as for system object model under design

  7. Design for reliability information and computer-based systems

    CERN Document Server

    Bauer, Eric

    2010-01-01

    "System reliability, availability and robustness are often not well understood by system architects, engineers and developers. They often don't understand what drives customer's availability expectations, how to frame verifiable availability/robustness requirements, how to manage and budget availability/robustness, how to methodically architect and design systems that meet robustness requirements, and so on. The book takes a very pragmatic approach of framing reliability and robustness as a functional aspect of a system so that architects, designers, developers and testers can address it as a concrete, functional attribute of a system, rather than an abstract, non-functional notion"--Provided by publisher.

  8. Markov analysis of different standby computer based systems

    International Nuclear Information System (INIS)

    Srinivas, G.; Guptan, Rajee; Mohan, Nalini; Ghadge, S.G.; Bajaj, S.S.

    2006-01-01

    As against the conventional triplicated systems of hardware and the generation of control signals for the actuator elements by means of redundant hardwired median circuits, employed in the early Indian PHWR's, a new approach of generating control signals based on software by a redundant system of computers is introduced in the advanced/current generation of Indian PHWR's. Reliability is increased by fault diagnostics and automatic switch over of all the loads to one computer in case of total failure of the other computer. Independent processing by a redundant CPU in each system enables inter-comparison to quickly identify system failure, in addition to the other self-diagnostic features provided. Combinatorial models such as reliability block diagrams and fault trees are frequently used to predict the reliability, maintainability and safety of complex systems. Unfortunately, these methods cannot accurately model dynamic system behavior; Because of its unique ability to handle dynamic cases, Markov analysis can be a powerful tool in the reliability maintainability and safety (RMS) analyses of dynamic systems. A Markov model breaks the system configuration into a number of states. Each of these states is connected to all other states by transition rates. It then utilizes transition matrices to evaluate the reliability and safety of the systems, either through matrix manipulation or other analytical solution methods, such as Laplace transforms. Thus, Markov analysis is a powerful reliability, maintainability and safety analysis tool. It allows the analyst to model complex, dynamic, highly distributed, fault tolerant systems that would otherwise be very difficult to model using classical techniques like the Fault tree method. The Dual Processor Hot Standby Process Control System (DPHS-PCS) and the Computerized Channel Temperature Monitoring System (CCTM) are typical examples of hot standby systems in the Indian PHWR's. While such systems currently in use in Indian PHWR

  9. Computer-based anthropometrical system for total body irradiation.

    Science.gov (United States)

    Sánchez-Nieto, B; Sánchez-Doblado, F; Terrón, J A; Arráns, R; Errazquin, L

    1997-05-01

    For total body irradiation (TBI) dose calculation requirements, anatomical information about the whole body is needed. Despite the fact that video image grabbing techniques are used by some treatment planning systems for standard radiotherapy, there are no such systems designed to generate anatomical parameters for TBI planning. The paper describes an anthropometrical computerised system based on video image grabbing which was purpose-built to provide anatomical data for a PC-based TBI planning system. Using software, the system controls the acquisition and digitalisation of the images (external images of the patient in treatment position) and the measurement procedure itself (on the external images or the digital CT information). An ASCII file, readable by the TBI planning system, is generated to store the required parameters of the dose calculation points, i.e. depth, backscatter tissue thickness, thickness of inhomogeneity, off-axis distance (OAD) and source to skin distance (SSD).

  10. Verification and validation of computer based systems for PFBR

    International Nuclear Information System (INIS)

    Thirugnanamurthy, D.

    2017-01-01

    Verification and Validation (V and V) process is essential to build quality into system. Verification is the process of evaluating a system to determine whether the products of each development phase satisfies the requirements imposed by the previous phase. Validation is the process of evaluating a system at the end of the development process to ensure compliance with the functional, performance and interface requirements. This presentation elaborates the V and V process followed, documents submission requirements in each stage, V and V activities, check list used for reviews in each stage and reports

  11. Problems and Issues in Using Computer- Based Support Tools to Enhance 'Soft' Systems Methodologies

    Directory of Open Access Journals (Sweden)

    Mark Stansfield

    2001-11-01

    Full Text Available This paper explores the issue of whether computer-based support tools can enhance the use of 'soft' systems methodologies as applied to real-world problem situations. Although work has been carried out by a number of researchers in applying computer-based technology to concepts and methodologies relating to 'soft' systems thinking such as Soft Systems Methodology (SSM, such attempts appear to be still in their infancy and have not been applied widely to real-world problem situations. This paper will highlight some of the problems that may be encountered in attempting to develop computer-based support tools for 'soft' systems methodologies. Particular attention will be paid to an attempt by the author to develop a computer-based support tool for a particular 'soft' systems method of inquiry known as the Appreciative Inquiry Method that is based upon Vickers' notion of 'appreciation' (Vickers, 196S and Checkland's SSM (Checkland, 1981. The final part of the paper will explore some of the lessons learnt from developing and applying the computer-based support tool to a real world problem situation, as well as considering the feasibility of developing computer-based support tools for 'soft' systems methodologies. This paper will put forward the point that a mixture of manual and computer-based tools should be employed to allow a methodology to be used in an unconstrained manner, but the benefits provided by computer-based technology should be utilised in supporting and enhancing the more mundane and structured tasks.

  12. Computer-based route-definition system for peripheral bronchoscopy.

    Science.gov (United States)

    Graham, Michael W; Gibbs, Jason D; Higgins, William E

    2012-04-01

    Multi-detector computed tomography (MDCT) scanners produce high-resolution images of the chest. Given a patient's MDCT scan, a physician can use an image-guided intervention system to first plan and later perform bronchoscopy to diagnostic sites situated deep in the lung periphery. An accurate definition of complete routes through the airway tree leading to the diagnostic sites, however, is vital for avoiding navigation errors during image-guided bronchoscopy. We present a system for the robust definition of complete airway routes suitable for image-guided bronchoscopy. The system incorporates both automatic and semiautomatic MDCT analysis methods for this purpose. Using an intuitive graphical user interface, the user invokes automatic analysis on a patient's MDCT scan to produce a series of preliminary routes. Next, the user visually inspects each route and quickly corrects the observed route defects using the built-in semiautomatic methods. Application of the system to a human study for the planning and guidance of peripheral bronchoscopy demonstrates the efficacy of the system.

  13. Computer Based Dose Control System on Linear Accelerator

    International Nuclear Information System (INIS)

    Taxwim; Djoko-SP; Widi-Setiawan; Agus-Budi Wiyatna

    2000-01-01

    The accelerator technology has been used for radio therapy. DokterKaryadi Hospital in Semarang use electron or X-ray linear accelerator (Linac)for cancer therapy. One of the control parameter of linear accelerator isdose rate. It is particle current or amount of photon rate to the target. Thecontrol of dose rate in linac have been done by adjusting repetition rate ofanode pulse train of electron source. Presently the control is stillproportional control. To enhance the quality of the control result (minimalstationer error, velocity and stability), the dose control system has beendesigned by using the PID (Proportional Integral Differential) controlalgorithm and the derivation of transfer function of control object.Implementation of PID algorithm control system is done by giving an input ofdose error (the different between output dose and dose rate set point). Theoutput of control system is used for correction of repetition rate set pointfrom pulse train of electron source anode. (author)

  14. Computer-based expert system aids underground mine planning

    Energy Technology Data Exchange (ETDEWEB)

    Britton, S.G.

    1987-04-01

    Artificial intelligence (AI) systems have been rapidly expanded over the last few years to aid in the decision making processes in a whole range of industries, including the use of machines for operating in high risk/dangerous areas such as at the working faces in longwall mining. Using Prolog software a program for mine management is being developed called CHOOZ. This system can help managers identify staffing problems and change manpower shifts to cope with unexpected labor problems such as absenteeism and sickness. All the programs have been developed for the IBM PC microcomputer.

  15. Computer-based instruction system DIDAK and its application

    International Nuclear Information System (INIS)

    Gvozdjak, L.; Hanulova, L.; Jankovicova, A.; Scepanek, L.

    1983-01-01

    The DIDAK system has been developed for the instruction and training of specialized personnel of nuclear power plants. The structure of the instruction system comprises three processes: the author process, the instruction process and the administration process. Author processes provide the didactic data structure with instruction texts. In the text data base the instruction material is stored in 6 direct access nonformatted files. The instruction system receives information from the text data base and presents it to the student. According to the student's response it creates the preconditions for the further operation of the system which it stores in the data base for administration of instruction. This base contains data on the identification of students, on the instruction process of the individual and the instruction process as a whole. Administrative processes take place in the final stage. They provide information on the general course of instruction and make final evaluations. From the data base of products of the instruction process the said administrative processes produce output information for the teacher. The subject matter of each subject is divided into a finite number of elementary units of subject matter. Each elementary unit provides basic information on the explained subject matter and is followed by a check of the student's knowledge. In dependence on the results of this check the student either advances to a higher level elementary unit or proceeds to an alternative branch of the initial unit. (E.S.)

  16. Computer-based safeguards information and accounting system

    International Nuclear Information System (INIS)

    1977-01-01

    Acquiring, processing and analysing information about inventories and flow of nuclear materials are essential parts of IAEA safeguards. Safeguards information originates from several sources. The information to be provided is specified in the various safeguards agreements between the States and the IAEA, including both NPT agreements and safeguards trilateral agreements. Most of the safeguards information currently received by the IAEA is contained in accounting reports from the States party to the NPT. Within the frame of the material balance concept of NPT, three types of reports are provided to the IAEA by the States: Physical Inventory Listings (PIL); Inventory Change Reports (ICR); Material Balance Reports (MBR). In addition, facility design information is reported when NPT safeguards are applied and whenever there is a change in the facility or its operation. Based on this data, an accounting system is used to make available such information as the book inventories of nuclear material as a function of time, material balance evaluations, and analysis of shipments versus receipts of nuclear material. A second source of NPT safeguards information is the inspection activities carried out in the field as a necessary counterpart for verification of the data presented by the States in their accounting reports. The processing of inspection reports and other inspection data is carried out by the present system in a provisional manner until a new system, which is under development is available. The major effort currently is directed not to computer processing but toward developing and applying uniform inspection procedures and information requirements. A third source of NPT safeguards information is advanced notifications and notifications of transfer of source materials before the starting point of safeguards. Since, however, the States are not completely aware of the need and requirement to provide these data, this is a point to be emphasized in future workshops and

  17. Computer-based cognitive rehabilitation: the CoRe system.

    Science.gov (United States)

    Alloni, Anna; Sinforiani, Elena; Zucchella, Chiara; Sandrini, Giorgio; Bernini, Sara; Cattani, Barbara; Pardell, Daniela Tost; Quaglini, Silvana; Pistarini, Caterina

    2017-02-01

    This work aims at providing a tool for supporting cognitive rehabilitation. This is a wide field, that includes a variety of diseases and related clinical pictures; for this reason the need arises to have a tool available that overcomes the difficulties entailed by what currently is the most common approach, that is, the so-called pen and paper rehabilitation. We first organized a big number of stimuli in an ontology that represents concepts, attributes and a set of relationships among concepts. Stimuli may be words, sounds, 2D and 3D images. Then, we developed an engine that automatically generates exercises by exploiting that ontology. The design of exercises has been carried on in synergy with neuropsychologists and speech therapists. Solutions have been devised aimed at personalizing the exercises according to both patients' preferences and performance. Exercises addressed to rehabilitation of executive functions and aphasia-related diseases have been implemented. The system has been tested on both healthy volunteers (n = 38) and patients (n = 9), obtaining a favourable rating and suggestions for improvements. We created a tool able to automate the execution of cognitive rehabilitation tasks. We hope the variety and personalization of exercises will allow to increase compliance, particularly from elderly people, usually neither familiar with technology nor particularly willing to rely on it. The next step involves the creation of a telerehabilitation tool, to allow therapy sessions to be undergone from home, thus guaranteeing continuity of care and advantages in terms of time and costs for the patients and the National Healthcare System (NHS). Implications for rehabilitation Cognitive impairments can greatly impact an individual's existence, appreciably reducing his abilities and autonomy, as well as sensibly lowering his quality of life. Cognitive rehabilitation can be used to restore lost brain function or slow down degenerative diseases

  18. The computer-based control system of the NAC accelerator

    International Nuclear Information System (INIS)

    Burdzik, G.F.; Bouckaert, R.F.A.; Cloete, I.; Du Toit, J.S.; Kohler, I.H.; Truter, J.N.J.; Visser, K.

    1982-01-01

    The National Accelerator Centre (NAC) of the CSIR is building a two-stage accelerator which will provide charged-particle beams for the use in medical and research applications. The control system for this accelerator is based on three mini-computers and a CAMAC interfacing network. Closed-loop control is being relegated to the various subsystems of the accelerators, and the computers and CAMAC network will be used in the first instance for data transfer, monitoring and servicing of the control consoles. The processing power of the computers will be utilized for automating start-up and beam-change procedures, for providing flexible and convenient information at the control consoles, for fault diagnosis and for beam-optimizing procedures. Tasks of a localized or dedicated nature are being off-loaded onto microcomputers, which are being used either in front-end devices or as slaves to the mini-computers. On the control consoles only a few instruments for setting and monitoring variables are being provided, but these instruments are universally-linkable to any appropriate machine variable

  19. The computer-based process information system for the 5 MW THR

    International Nuclear Information System (INIS)

    Zhang Liangju; Zhang Youhua; Liu Xu; An Zhencai; Li Baoxiang

    1990-01-01

    The computer-based process information system has effectively improved the interface between operation person and the reactor, and has been successfully used in reactor operation environment. This article presents the design strategy, functions realized in the system and some advanced techniques used in the system construction and software development

  20. Applications of computer based safety systems in Korea nuclear power plants

    International Nuclear Information System (INIS)

    Won Young Yun

    1998-01-01

    With the progress of computer technology, the applications of computer based safety systems in Korea nuclear power plants have increased rapidly in recent decades. The main purpose of this movement is to take advantage of modern computer technology so as to improve the operability and maintainability of the plants. However, in fact there have been a lot of controversies on computer based systems' safety between the regulatory body and nuclear utility in Korea. The Korea Institute of Nuclear Safety (KINS), technical support organization for nuclear plant licensing, is currently confronted with the pressure to set up well defined domestic regulatory requirements from this aspect. This paper presents the current status and the regulatory activities related to the applications of computer based safety systems in Korea. (author)

  1. Applications of decision theory to computer-based adaptive instructional systems

    NARCIS (Netherlands)

    Vos, Hendrik J.

    1988-01-01

    This paper considers applications of decision theory to the problem of instructional decision-making in computer-based adaptive instructional systems, using the Minnesota Adaptive Instructional System (MAIS) as an example. The first section indicates how the problem of selecting the appropriate

  2. A computer-based time study system for timber harvesting operations

    Science.gov (United States)

    Jingxin Wang; Joe McNeel; John Baumgras

    2003-01-01

    A computer-based time study system was developed for timber harvesting operations. Object-oriented techniques were used to model and design the system. The front-end of the time study system resides on the MS Windows CE and the back-end is supported by MS Access. The system consists of three major components: a handheld system, data transfer interface, and data storage...

  3. Convincing Conversations : Using a Computer-Based Dialogue System to Promote a Plant-Based Diet

    NARCIS (Netherlands)

    Zaal, Emma; Mills, Gregory; Hagen, Afke; Huisman, Carlijn; Hoeks, Jacobus

    2017-01-01

    In this study, we tested the effectiveness of a computer-based persuasive dialogue system designed to promote a plant-based diet. The production and consumption of meat and dairy has been shown to be a major cause of climate change and a threat to public health, bio-diversity, animal rights and

  4. Intention and Usage of Computer Based Information Systems in Primary Health Centers

    Science.gov (United States)

    Hosizah; Kuntoro; Basuki N., Hari

    2016-01-01

    The computer-based information system (CBIS) is adopted by almost all of in health care setting, including the primary health center in East Java Province Indonesia. Some of softwares available were SIMPUS, SIMPUSTRONIK, SIKDA Generik, e-puskesmas. Unfortunately they were most of the primary health center did not successfully implemented. This…

  5. Radiologic total lung capacity measurement. Development and evaluation of a computer-based system

    Energy Technology Data Exchange (ETDEWEB)

    Seeley, G.W.; Mazzeo, J.; Borgstrom, M.; Hunter, T.B.; Newell, J.D.; Bjelland, J.C.

    1986-11-01

    The development of a computer-based radiologic total lung capacity (TLC) measurement system designed to be used by non-physician personnel is detailed. Four operators tested the reliability and validity of the system by measuring inspiratory PA and lateral pediatric chest radiographs with a Graf spark pen interfaced to a DEC VAX 11/780 computer. First results suggest that the ultimate goal of developing an accurate and easy to use TLC measurement system for non-physician personnel is attainable.

  6. Overview of Risk Mitigation for Safety-Critical Computer-Based Systems

    Science.gov (United States)

    Torres-Pomales, Wilfredo

    2015-01-01

    This report presents a high-level overview of a general strategy to mitigate the risks from threats to safety-critical computer-based systems. In this context, a safety threat is a process or phenomenon that can cause operational safety hazards in the form of computational system failures. This report is intended to provide insight into the safety-risk mitigation problem and the characteristics of potential solutions. The limitations of the general risk mitigation strategy are discussed and some options to overcome these limitations are provided. This work is part of an ongoing effort to enable well-founded assurance of safety-related properties of complex safety-critical computer-based aircraft systems by developing an effective capability to model and reason about the safety implications of system requirements and design.

  7. IDEA system - a new computer-based expert system for incorporation monitoring

    International Nuclear Information System (INIS)

    Doerfel, H.

    2007-01-01

    Recently, at the Karlsruhe Research Centre, a computer-based expert system, Internal Dose Equivalent Assessment System (IDEA System), has been developed for assisting dosimetrists in applying the relevant recommendations and guidelines for internal dosimetry. The expert system gives guidance to the user with respect to: (a) planning of monitoring, (b) performing routine and special monitoring, and (c) evaluation of primary monitoring results. The evaluation is done according to the IDEA System guidelines (Doerfel, H. et al., General guidelines for the estimation of committed effective dose from incorporation monitoring data. Research Report FZKA 7243, Research Center Karlsruhe, Karlsruhe (2006). ISSN 0947-8260.) in a three-stage procedure according to the expected level of exposure. At the first level the evaluation is performed with default or site-specific parameter values, at the second level case-specific parameter values are applied and at the third level a special evaluation is performed with individual adjustment of model parameter values. With these well-defined procedures the expert system follows the aim, in which all recommendations and guidelines are applied properly and the results in terms of committed effective and organ doses are close to the best estimate. (author)

  8. CNRA/CSNI workshop on licensing and operating experience of computer-based I and C systems - Summary and conclusions

    International Nuclear Information System (INIS)

    2002-01-01

    researching computer-based systems important to safety to get together and to discuss their insights learned from their actual activities. The Workshop was successful in this point. It was attended by 65 people from 15 countries and by 2 international organizations. In general terms, the Workshop attempted to give answers to questions in the following areas: - What are the benefits of using computer-based I and C systems? - What national and international standards and guidance could be universally acceptable from the safety perspective? - What are the regulatory requirements for the current and future generations of digital I and C systems? - What are the major technical issues and challenges associated with applications of digital technology in I and C systems? As a general conclusion, the Workshop can be considered representative of the progress made towards reaching the targets set at the Munich workshop almost five years ago. The Munich workshop had identified areas where further development and specific improvements were needed. The Hluboka workshop has reviewed the development achieved since then. Based on the papers presented at this workshop and on the discussions by the workshop participants, it is evident that the details of the life-cycle activities and the associated acceptance criteria are still in flux and have yet to be universally acceptable. The basic trends from Munich still hold and are reaffirmed in the frame of evolving regulatory and commercial environments. Future international co-operation should strive to reach universally acceptable positions in the above areas

  9. Primary Health Care Software-A Computer Based Data Management System

    Directory of Open Access Journals (Sweden)

    Tuli K

    1990-01-01

    Full Text Available Realising the duplication and time consumption in the usual manual system of data collection necessitated experimentation with computer based management system for primary health care in the primary health centers. The details of the population as available in the existing manual system were used for computerizing the data. Software was designed for data entry and analysis. It was written in Dbase III plus language. It was so designed that a person with no knowledge about computer could use it, A cost analysis was done and the computer system was found more cost effective than the usual manual system.

  10. Computer-based control of nuclear power information systems at international level

    International Nuclear Information System (INIS)

    Boniface, Ekechukwu; Okonkwo, Obi

    2011-01-01

    In most highly industrialized countries of the world information plays major role in anti-nuclear campaign. Information and discussions on nuclear power need critical and objective analysis before the structured information presentation to the public to avoid bias anti-nuclear information on one side and neglect of great risk in nuclear power. This research is developing a computer-based information system for the control of nuclear power at international level. The system is to provide easy and fast information highways for the followings: (1) Low Regulatory dose and activity limit as level of high danger for individuals and public. (2) Provision of relevant technical or scientific education among the information carriers in the nuclear power countries. The research is on fact oriented investigation about radioactivity. It also deals with fact oriented education about nuclear accidents and safety. A standard procedure for dissemination of latest findings using technical and scientific experts in nuclear technology is developed. The information highway clearly analyzes the factual information about radiation risk and nuclear energy. Radiation cannot be removed from our environment. The necessity of radiation utilizations defines nuclear energy as two-edge sword. It is therefore, possible to use computer-based information system in projecting and dissemination of expert knowledge about nuclear technology positively and also to use it in directing the public on the safety and control of the nuclear energy. The computer-based information highway for nuclear energy technology is to assist in scientific research and technological development at international level. (author)

  11. End-User Recommendations on LOGOMON - a Computer Based Speech Therapy System for Romanian Language

    Directory of Open Access Journals (Sweden)

    SCHIPOR, O. A.

    2010-11-01

    Full Text Available In this paper we highlight the relations between LOGOMON - a Computer Based Speech Therapy System and dyslalia's training steps. Dyslalia is a speech disorder that affects pronunciation of one or many sounds. This presentation of the system is completed by a research regarding end-user (i.e. teachers and parents attitude about the speech assisted therapy in general and about LOGOMON System in particular. The results of this research allow the improvement of our CBST system because the obtained information can be a source of adaptability to different expectations of the beneficiaries.

  12. Review of P-scan computer-based ultrasonic inservice inspection system. Supplement 1

    International Nuclear Information System (INIS)

    Harris, R.V. Jr.; Angel, L.J.

    1995-12-01

    This Supplement reviews the P-scan system, a computer-based ultrasonic system used for inservice inspection of piping and other components in nuclear power plants. The Supplement was prepared using the methodology described in detail in Appendix A of NUREG/CR-5985, and is based on one month of using the system in a laboratory. This Supplement describes and characterizes: computer system, ultrasonic components, and mechanical components; scanning, detection, digitizing, imaging, data interpretation, operator interaction, data handling, and record-keeping. It includes a general description, a review checklist, and detailed results of all tests performed

  13. The Simulation Computer Based Learning (SCBL) for Short Circuit Multi Machine Power System Analysis

    Science.gov (United States)

    Rahmaniar; Putri, Maharani

    2018-03-01

    Strengthening Competitiveness of human resources become the reply of college as a conductor of high fomal education. Electrical Engineering Program UNPAB (Prodi TE UNPAB) as one of the department of electrical engineering that manages the field of electrical engineering expertise has a very important part in preparing human resources (HR), Which is required by where graduates are produced by DE UNPAB, Is expected to be able to compete globally, especially related to the implementation of Asean Economic Community (AEC) which requires the active participation of graduates with competence and quality of human resource competitiveness. Preparation of HR formation Competitive is done with the various strategies contained in the Seven (7) Higher Education Standard, one part of which is the implementation of teaching and learning process in Electrical system analysis with short circuit analysis (SCA) This course is a course The core of which is the basis for the competencies of other subjects in the advanced semester at Development of Computer Based Learning model (CBL) is done in the learning of interference analysis of multi-machine short circuit which includes: (a) Short-circuit One phase, (B) Two-phase Short Circuit Disruption, (c) Ground Short Circuit Disruption, (d) Short Circuit Disruption One Ground Floor Development of CBL learning model for Electrical System Analysis course provides space for students to be more active In learning in solving complex (complicated) problems, so it is thrilling Ilkan flexibility of student learning how to actively solve the problem of short-circuit analysis and to form the active participation of students in learning (Student Center Learning, in the course of electrical power system analysis.

  14. IDEA-system - a new computer based expert system for incorporation monitoring

    International Nuclear Information System (INIS)

    Doerfel, H.

    2005-01-01

    Full text: There is an increasing number of national and international recommendations and guidelines for incorporation monitoring (ICRP Publications, IAEA Safety Reports, ISO Standards, etc.). These recommendations cover different phases of incorporation monitoring and they provide general requirements for the measuring techniques, the monitoring procedures and for the procedures to evaluate intakes and doses from the monitoring results. There is, however, still a strong need for giving guidance to the dosimetrists on how to apply all the regulations properly. Thus, the EU project IDEAS was launched in order to provide general guidelines for the assessment of internal dose from incorporation monitoring data. These guidelines have recently been discussed in a virtual workshop on the internet (www.ideas-workshop.de) and they are being considered by ICRP for possible adoption in the near future. Recently, in the Karlsruhe Research Centre, a computer-based expert system has been developed for assisting dosimetrists in applying the relevant recommendations and guidelines for incorporation monitoring and internal dosimetry. The expert system gives guidance to the user with respect to: planning of monitoring (estimation of potential exposures, decision on the requirements of monitoring, definition of optimum measuring techniques and monitoring intervals); performing routine and special monitoring and evaluation of primary monitoring results. The evaluation of primary monitoring results is done according to the IDEAS guidelines in a threestage procedure according to the expected level of exposure (E = committed effective dose): standard evaluation with default or site specific parameter values (E 6 mSv). With these well-defined procedures the expert system follows the aim, that all recommendations and guidelines are applied properly and thus: internal exposures of more than 1 mSv are very likely to be detected in all situations; the results in terms of committed effective

  15. System Requirements Analysis for a Computer-based Procedure in a Research Reactor Facility

    Energy Technology Data Exchange (ETDEWEB)

    Park, Jaek Wan; Jang, Gwi Sook; Seo, Sang Moon; Shin, Sung Ki [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

    2014-10-15

    This can address many of the routine problems related to human error in the use of conventional, hard-copy operating procedures. An operating supporting system is also required in a research reactor. A well-made CBP can address the staffing issues of a research reactor and reduce the human errors by minimizing the operator's routine tasks. A CBP for a research reactor has not been proposed yet. Also, CBPs developed for nuclear power plants have powerful and various technical functions to cover complicated plant operation situations. However, many of the functions may not be required for a research reactor. Thus, it is not reasonable to apply the CBP to a research reactor directly. Also, customizing of the CBP is not cost-effective. Therefore, a compact CBP should be developed for a research reactor. This paper introduces high level requirements derived by the system requirements analysis activity as the first stage of system implementation. Operation support tools are under consideration for application to research reactors. In particular, as a full digitalization of the main control room, application of a computer-based procedure system has been required as a part of man-machine interface system because it makes an impact on the operating staffing and human errors of a research reactor. To establish computer-based system requirements for a research reactor, this paper addressed international standards and previous practices on nuclear plants.

  16. COMPUTER-BASED SYSTEMS OF PHYSICAL EXPERIMENT IN INDEPENDENT WORK OF STUDENTS OF TECHNICAL UNIVERSITY

    Directory of Open Access Journals (Sweden)

    Iryna Slipukhina

    2016-11-01

    Full Text Available Purpose: The self-study activity of students is an important form of educational process under the conditions of rapid changes of technologies. Ability and readiness of future engineers for independent education is one of their key competences. Investigation of modern methods of planning, organization and control of independent cognitive activity of students while studying physics as effective means of complex forming of their professional qualities is the object of the research. Methods: We analyse the curricula of some engineering specialities in leading technical universities, existent methods and forms of organization of students’ self-study, and own pedagogical experience. Results: Based on the theoretical analysis of existing methods of students’ self-study, it was found that a systematizing factor of appropriate educational technology is the problem focused cognitive tasks. They have to be implemented by application of the modern technological devices integrated with a computer-based experiment. We define the aim of individual or group laboratory works; the necessary theoretical and practical knowledge and skills of students are rationalized; timing and form of presentation of the results are clarified after individual and group consulting. The details of preparatory, searching-organizational, operational, and control stages in organization of students’ self-study with the use of computer oriented physical experiment are specified, these details differ depending on the didactic purpose, form of organization and students’ individuality. Discussion: The research theoretical aspect confirms the determining role of subject-subject cooperation in forming of competences of independent learning of the future engineers. Basic practical achievements of the research consist of improving methods of using of digital learning systems, creation of textbooks that promote consultative and guiding role for the educational process, working-out of

  17. Micro-computer based control system and its software for carrying out the sequential acceleration on SMCAMS

    International Nuclear Information System (INIS)

    Li Deming

    2001-01-01

    Micro-computer based control system and its software for carrying out the sequential acceleration on SMCAMS is described. Also, the establishment of the 14 C particle measuring device and the improvement of the original power supply system are described

  18. A computer-based servo system for controlling isotonic contractions of muscle.

    Science.gov (United States)

    Smith, J P; Barsotti, R J

    1993-11-01

    We have developed a computer-based servo system for controlling isotonic releases in muscle. This system is a composite of commercially available devices: an IBM personal computer, an analog-to-digital (A/D) board, an Akers AE801 force transducer, and a Cambridge Technology motor. The servo loop controlling the force clamp is generated by computer via the A/D board, using a program written in QuickBASIC 4.5. Results are shown that illustrate the ability of the system to clamp the force generated by either skinned cardiac trabeculae or single rabbit psoas fibers down to the resolution of the force transducer within 4 ms. This rate is independent of the level of activation of the tissue and the size of the load imposed during the release. The key to the effectiveness of the system consists of two algorithms that are described in detail. The first is used to calculate the error signal to hold force to the desired level. The second algorithm is used to calculate the appropriate gain of the servo for a particular fiber and the size of the desired load to be imposed. The results show that the described computer-based method for controlling isotonic releases in muscle represents a good compromise between simplicity and performance and is an alternative to the custom-built digital/analog servo devices currently being used in studies of muscle mechanics.

  19. Automated detection of heuristics and biases among pathologists in a computer-based system.

    Science.gov (United States)

    Crowley, Rebecca S; Legowski, Elizabeth; Medvedeva, Olga; Reitmeyer, Kayse; Tseytlin, Eugene; Castine, Melissa; Jukic, Drazen; Mello-Thoms, Claudia

    2013-08-01

    The purpose of this study is threefold: (1) to develop an automated, computer-based method to detect heuristics and biases as pathologists examine virtual slide cases, (2) to measure the frequency and distribution of heuristics and errors across three levels of training, and (3) to examine relationships of heuristics to biases, and biases to diagnostic errors. The authors conducted the study using a computer-based system to view and diagnose virtual slide cases. The software recorded participant responses throughout the diagnostic process, and automatically classified participant actions based on definitions of eight common heuristics and/or biases. The authors measured frequency of heuristic use and bias across three levels of training. Biases studied were detected at varying frequencies, with availability and search satisficing observed most frequently. There were few significant differences by level of training. For representativeness and anchoring, the heuristic was used appropriately as often or more often than it was used in biased judgment. Approximately half of the diagnostic errors were associated with one or more biases. We conclude that heuristic use and biases were observed among physicians at all levels of training using the virtual slide system, although their frequencies varied. The system can be employed to detect heuristic use and to test methods for decreasing diagnostic errors resulting from cognitive biases.

  20. Development of computer-based analytical tool for assessing physical protection system

    Science.gov (United States)

    Mardhi, Alim; Pengvanich, Phongphaeth

    2016-01-01

    Assessment of physical protection system effectiveness is the priority for ensuring the optimum protection caused by unlawful acts against a nuclear facility, such as unauthorized removal of nuclear materials and sabotage of the facility itself. Since an assessment based on real exercise scenarios is costly and time-consuming, the computer-based analytical tool can offer the solution for approaching the likelihood threat scenario. There are several currently available tools that can be used instantly such as EASI and SAPE, however for our research purpose it is more suitable to have the tool that can be customized and enhanced further. In this work, we have developed a computer-based analytical tool by utilizing the network methodological approach for modelling the adversary paths. The inputs are multi-elements in security used for evaluate the effectiveness of the system's detection, delay, and response. The tool has capability to analyze the most critical path and quantify the probability of effectiveness of the system as performance measure.

  1. A computer-based training system combining virtual reality and multimedia

    International Nuclear Information System (INIS)

    Stansfield, S.A.

    1993-01-01

    Training new users of complex machines is often an expensive and time-consuming process. This is particularly true for special purpose systems, such as those frequently encountered in DOE applications. This paper presents a computer-based training system intended as a partial solution to this problem. The system extends the basic virtual reality (VR) training paradigm by adding a multimedia component which may be accessed during interaction with the virtual environment: The 3D model used to create the virtual reality is also used as the primary navigation tool through the associated multimedia. This method exploits the natural mapping between a virtual world and the real world that it represents to provide a more intuitive way for the student to interact with all forms of information about the system

  2. Computer-based supervisory control and data acquisition system for the radioactive waste evaporator

    International Nuclear Information System (INIS)

    Pope, N.G.; Schreiber, S.B.; Yarbro, S.L.; Gomez, B.G.; Nekimken, H.L.; Sanchez, D.E.; Bibeau, R.A.; Macdonald, J.M.

    1994-12-01

    The evaporator process at TA-55 reduces the amount of transuranic liquid radioactive waste by separating radioactive salts from relatively low-level radioactive nitric acid solution. A computer-based supervisory control and data acquisition (SCADA) system has been installed on the process that allows the operators to easily interface with process equipment. Individual single-loop controllers in the SCADA system allow more precise process operation with less human intervention. With this system, process data can be archieved in computer files for later analysis. Data are distributed throughout the TA-55 site through a local area network so that real-time process conditions can be monitored at multiple locations. The entire system has been built using commercially available hardware and software components

  3. Computer based system for measuring the minority carrier lifetime in the solar cells

    International Nuclear Information System (INIS)

    Morales A, A.; Casados C, G.

    1994-01-01

    We show the development of a computer based system for measuring the minority carrier lifetime in the base of silicon solar cells. The system allows using two different techniques for such kind of measurements:the open circuit voltage decay (OCVD) and the surface voltage decay SVD. The equipment is based on internal cards for IBM-Pc or compatible computers that work as an oscilloscope and as a function generator, in addition to a synchronization and signal conditioning circuit. The system is fully controlled by a 'c' language program that optimizes the used of the instrument built in this way, and makes the analysis of the measurement data by curve fitting techniques. We show typical results obtained with silicon solar cells made in our laboratories. (Author)

  4. A dynamic fail-safe approach to the design of computer-based safety systems

    International Nuclear Information System (INIS)

    Smith, I.C.; Miller, M.

    1994-01-01

    For over 30 years AEA Technology has carried out research and development in the field of nuclear instrumentation and protection systems. Throughout the course of this extensive period of research and development the dominant theme has been the achievement of fully fail-safe designs. These are defined as designs in which the failure of any single component will result in the unit output reverting to a demand for trip action status. At an early stage it was recognized that the use of dynamic rather than static logic could ease the difficulties inherent in achieving a fail-safe design. The first dynamic logic systems coupled logic elements magnetically. The paper outlines the evolution from these early concepts of a dynamic fail-safe approach to the design of computer-based safety systems. Details are given of collaboration between AEA Technology and Duke Power Co. to mount an ISAT TM demonstration at Duke's Oconee Nuclear Power Station

  5. Computer based ultrasonic system for mechanical and acoustical characterization of materials

    International Nuclear Information System (INIS)

    Rosly Jaafar; Mohd Rozni Mohd Yusof; Khaidzir Hamzah; Md Supar Rohani; Rashdi Shah Ahmad; Amiruddin Shaari

    2001-01-01

    Propagation of both modes of ultrasonic waves velocity i.e. longitudinal (compressional) and transverse (shear), propagating in a material are closely linked with the material's physical and mechanical properties. By measuring both velocity modes, materials' properties such as Young's, bulk and shear moduli, compressibility, Poisson ratio and acoustic impedance can be determined. This paper describes the development of a system that is able to perform the above tasks and is known as Computer Based Ultrasonic for Mechanical and Acoustical Characterisation of Materials (UMC). The system was developed in the NDT Instrumentation and Signal Processing (NDTSP) laboratory of the Physics Department, Universiti Teknologi Malaysia. Measurements were made on four solid samples, namely, glass, copper, mild steel and aluminium. The results of measurements obtained were found to be in good agreement with the values of measurements made using standard methods. The main advantage of using this system over other methods is that single measurement of two ultrasonic velocity modes yields six material's properties. (Author)

  6. Noise filtering algorithm for the MFTF-B computer based control system

    International Nuclear Information System (INIS)

    Minor, E.G.

    1983-01-01

    An algorithm to reduce the message traffic in the MFTF-B computer based control system is described. The algorithm filters analog inputs to the control system. Its purpose is to distinguish between changes in the inputs due to noise and changes due to significant variations in the quantity being monitored. Noise is rejected while significant changes are reported to the control system data base, thus keeping the data base updated with a minimum number of messages. The algorithm is memory efficient, requiring only four bytes of storage per analog channel, and computationally simple, requiring only subtraction and comparison. Quantitative analysis of the algorithm is presented for the case of additive Gaussian noise. It is shown that the algorithm is stable and tends toward the mean value of the monitored variable over a wide variety of additive noise distributions

  7. Organization of the secure distributed computing based on multi-agent system

    Science.gov (United States)

    Khovanskov, Sergey; Rumyantsev, Konstantin; Khovanskova, Vera

    2018-04-01

    Nowadays developing methods for distributed computing is received much attention. One of the methods of distributed computing is using of multi-agent systems. The organization of distributed computing based on the conventional network computers can experience security threats performed by computational processes. Authors have developed the unified agent algorithm of control system of computing network nodes operation. Network PCs is used as computing nodes. The proposed multi-agent control system for the implementation of distributed computing allows in a short time to organize using of the processing power of computers any existing network to solve large-task by creating a distributed computing. Agents based on a computer network can: configure a distributed computing system; to distribute the computational load among computers operated agents; perform optimization distributed computing system according to the computing power of computers on the network. The number of computers connected to the network can be increased by connecting computers to the new computer system, which leads to an increase in overall processing power. Adding multi-agent system in the central agent increases the security of distributed computing. This organization of the distributed computing system reduces the problem solving time and increase fault tolerance (vitality) of computing processes in a changing computing environment (dynamic change of the number of computers on the network). Developed a multi-agent system detects cases of falsification of the results of a distributed system, which may lead to wrong decisions. In addition, the system checks and corrects wrong results.

  8. Development of a personal computer based facility-level SSAC component and inspector support system

    International Nuclear Information System (INIS)

    Markov, A.

    1989-08-01

    Research Contract No. 4658/RB was conducted between the IAEA and the Bulgarian Committee on Use of Atomic Energy for Peaceful Purposes. The contract required the Committee to develop and program a personal computer based software package to be used as a facility-level computerized State System of Accounting and Control (SSAC) at an off-load power reactor. The software delivered, called the National Safeguards System (NSS) keeps track of all fuel assembly activity at a power reactor and generates all ledgers, MBA material balances and any required reports to national or international authorities. The NSS is designed to operate on a PC/AT or compatible equipment with a hard disk of 20 MB, color graphics monitor or adaptor and at least one floppy disk drive, 360 Kb. The programs are written in Basic (compiler 2.0). They are executed under MS DOS 3.1 or later

  9. Upgrade of the computer-based information systems on USNRC simulators

    International Nuclear Information System (INIS)

    Griffin, J.I.

    1998-01-01

    In late 1995, the U.S. Nuclear Regulatory Commission (USNRC) began a project to upgrade the computer-based information systems on its BWR/6 and BandW Simulators. The existing display generation hardware was very old and in need of replacement due to difficulty in obtaining spare parts and technical support. In addition, the display systems used currently each require a SEL 32/55 computer system, which is also obsolete, running the Real Time Monitor (RTM) operating system. An upgrade of the display hardware and display generation systems not only solves the problem of obsolescence of that equipment but also allows removal of the 32/55 systems. These computers are used only to support the existing display generation systems. Shortly after purchase of the replacement equipment, it was learned that the vendor was no longer going to support the methodology. Instead of implementing an unsupported concept, it was decided to implement the display systems upgrades using the Picasso-3 UIMS (User Interface Management System) and the purchased hardware. This paper describes the upgraded display systems for the BWR/6 and BandW Simulators, including the design concept, display development, hardware requirements, the simulator interface software, and problems encountered. (author)

  10. virtX - a computer based system for training the intrasurgical use of mobile image intensifier systems

    Directory of Open Access Journals (Sweden)

    Pretschner, Dietrich Peter

    2006-11-01

    Full Text Available Background and objectives: Currently the correct intrasurgical positioning and adjustment of mobile X-ray image intensifiers (C-arm can be learned theoretically through the use of textbooks, the practical training with the device itself suffers from the lack of visual feedback, i.e. radiographs corresponding to the adjustment of the C-arm. This leads to the question, whether the training of correct operation and adjustment of a C-arm in different operation scenarios can be supported by a C-arm simulation system being part of a CBT system (Computer Based Training. Methods: In co-operation with physicians from accident surgery and radiology the computer-based training system virtX was developed. virtX confronts the user with different exercises of C-arm adjustment and evaluates their execution and the results. These tasks can be created with the help of an authoring tool and can be accomplished by the trainee in different modes: a pure virtual mode and a combined virtual-real mode. In the pure virtual mode the user controls the virtual C-arm in a virtual operating theatre via the graphic-interactive virtX user interface. In the virtual-real mode however the position and orientation of a real C-arm are detected and mapped onto the virtual C-arm. At any time during the completion of an exercise the user can produce a close-to-reality, virtual radiograph and can control all parameters, like the positions of the apertures, X-ray intensity, etc. virtX was used on a three-day course for OR personnel with 120 participants and evaluated using questionnaires.Results: 79 of the participants returned a questionnaire. The average age of the 62 female and 15 male participants (two n.s. was 34 ± 9 years, their professional experience was 8.3 ± 7.6 years. 18 persons (23% indicated to work occasionally with a C-arm, 61 (77% worked regularly with it. Over 83% of the interviewed participants considered virtX a useful addition to the conventional C-arm training

  11. Efficacy of computer-based endoscope cleaning and disinfection using a hospital management information system.

    Science.gov (United States)

    Wang, Caixia; Chen, Yuanyuan; Yang, Feng; Ren, Jie; Yu, Xin; Wang, Jiani; Sun, Siyu

    2016-08-01

    The present study aimed to assess the efficacy of computer-based endoscope cleaning and disinfection using a hospital management information system (HMIS). A total of 2,674 gastroscopes were eligible for inclusion in this study. For the processes of disinfection management, the gastroscopes were randomly divided into 2 groups: gastroscope disinfection HMIS (GD-HMIS) group and manual group. In the GD-HMIS group, an integrated circuit card (IC card) chip was installed to monitor and record endoscope cleaning and disinfection automatically and in real time, whereas the endoscope cleaning and disinfection in the manual group was recorded manually. The overall disinfection progresses for both groups were recorded, and the total operational time was calculated. For the GD-HMIS group, endoscope disinfection HMIS software was successfully developed. The time to complete a single session of cleaning and disinfecting on a gastroscope was 15.6 minutes (range, 14.3-17.2 minutes) for the GD-HMIS group and 21.3 minutes (range, 20.2-23.9 minutes) for the manual group. Failure to record information, such as the identification number of the endoscope, occasionally occurred in the manual group, which affected the accuracy and reliability of manual recording. Computer-based gastroscope cleaning and disinfection using a hospital management information system could monitor the process of gastroscope cleaning and disinfection in real time and improve the accuracy and reliability, thereby ensuring the quality of gastroscope cleaning and disinfection. Copyright © 2016 Association for Professionals in Infection Control and Epidemiology, Inc. Published by Elsevier Inc. All rights reserved.

  12. Computer-based Creativity Enhanced Conceptual Design Model for Non-routine Design of Mechanical Systems

    Institute of Scientific and Technical Information of China (English)

    LI Yutong; WANG Yuxin; DUFFY Alex H B

    2014-01-01

    Computer-based conceptual design for routine design has made great strides, yet non-routine design has not been given due attention, and it is still poorly automated. Considering that the function-behavior-structure(FBS) model is widely used for modeling the conceptual design process, a computer-based creativity enhanced conceptual design model(CECD) for non-routine design of mechanical systems is presented. In the model, the leaf functions in the FBS model are decomposed into and represented with fine-grain basic operation actions(BOA), and the corresponding BOA set in the function domain is then constructed. Choosing building blocks from the database, and expressing their multiple functions with BOAs, the BOA set in the structure domain is formed. Through rule-based dynamic partition of the BOA set in the function domain, many variants of regenerated functional schemes are generated. For enhancing the capability to introduce new design variables into the conceptual design process, and dig out more innovative physical structure schemes, the indirect function-structure matching strategy based on reconstructing the combined structure schemes is adopted. By adjusting the tightness of the partition rules and the granularity of the divided BOA subsets, and making full use of the main function and secondary functions of each basic structure in the process of reconstructing of the physical structures, new design variables and variants are introduced into the physical structure scheme reconstructing process, and a great number of simpler physical structure schemes to accomplish the overall function organically are figured out. The creativity enhanced conceptual design model presented has a dominant capability in introducing new deign variables in function domain and digging out simpler physical structures to accomplish the overall function, therefore it can be utilized to solve non-routine conceptual design problem.

  13. Computer-based creativity enhanced conceptual design model for non-routine design of mechanical systems

    Science.gov (United States)

    Li, Yutong; Wang, Yuxin; Duffy, Alex H. B.

    2014-11-01

    Computer-based conceptual design for routine design has made great strides, yet non-routine design has not been given due attention, and it is still poorly automated. Considering that the function-behavior-structure(FBS) model is widely used for modeling the conceptual design process, a computer-based creativity enhanced conceptual design model(CECD) for non-routine design of mechanical systems is presented. In the model, the leaf functions in the FBS model are decomposed into and represented with fine-grain basic operation actions(BOA), and the corresponding BOA set in the function domain is then constructed. Choosing building blocks from the database, and expressing their multiple functions with BOAs, the BOA set in the structure domain is formed. Through rule-based dynamic partition of the BOA set in the function domain, many variants of regenerated functional schemes are generated. For enhancing the capability to introduce new design variables into the conceptual design process, and dig out more innovative physical structure schemes, the indirect function-structure matching strategy based on reconstructing the combined structure schemes is adopted. By adjusting the tightness of the partition rules and the granularity of the divided BOA subsets, and making full use of the main function and secondary functions of each basic structure in the process of reconstructing of the physical structures, new design variables and variants are introduced into the physical structure scheme reconstructing process, and a great number of simpler physical structure schemes to accomplish the overall function organically are figured out. The creativity enhanced conceptual design model presented has a dominant capability in introducing new deign variables in function domain and digging out simpler physical structures to accomplish the overall function, therefore it can be utilized to solve non-routine conceptual design problem.

  14. A computer-based anaglyphic system for the treatment of amblyopia

    Directory of Open Access Journals (Sweden)

    Rastegarpour A

    2011-09-01

    Full Text Available Ali Rastegarpour Ophthalmic Research Center, Shahid Beheshti University of Medical Sciences, Tehran, Iran Purpose: Virtual reality (VR-based treatment has been introduced as a potential option for amblyopia management, presumably without involving the problems of occlusion and penalization, including variable and unsatisfactory outcomes, long duration of treatment, poor compliance, psychological impact, and complications. However, VR-based treatment is costly and not accessible for most children. This paper introduces a method that encompasses the advantages of VR-based treatment at a lower cost. Methods: The presented system consists of a pair of glasses with two color filters and software for use on a personal computer. The software is designed such that some active graphic components can only be seen by the amblyopic eye and are filtered out for the other eye. Some components would be seen by both to encourage fusion. The result is that the patient must use both eyes, and specifically the amblyopic eye, to play the games. Results: A prototype of the system, the ABG InSight, was found capable of successfully filtering out elements of a certain color and therefore, could prove to be a viable alternative to VR-based treatment for amblyopia. Conclusion: The anaglyphic system maintains most of the advantages of VR-based systems, but is less costly and highly accessible. It fulfills the means that VR-based systems are designed to achieve, and warrants further investigation. Keywords: amblyopia, computer-based, open source, virtual reality, color filters, 3-D

  15. A Computer-Based, Interactive Videodisc Job Aid and Expert System for Electron Beam Lithography Integration and Diagnostic Procedures.

    Science.gov (United States)

    Stevenson, Kimberly

    This master's thesis describes the development of an expert system and interactive videodisc computer-based instructional job aid used for assisting in the integration of electron beam lithography devices. Comparable to all comprehensive training, expert system and job aid development require a criterion-referenced systems approach treatment to…

  16. Technical basis for environmental qualification of computer-based safety systems in nuclear power plants

    International Nuclear Information System (INIS)

    Korsah, K.; Wood, R.T.; Tanaka, T.J.; Antonescu, C.E.

    1997-01-01

    This paper summarizes the results of research sponsored by the US Nuclear Regulatory Commission (NRC) to provide the technical basis for environmental qualification of computer-based safety equipment in nuclear power plants. This research was conducted by the Oak Ridge National Laboratory (ORNL) and Sandia National Laboratories (SNL). ORNL investigated potential failure modes and vulnerabilities of microprocessor-based technologies to environmental stressors, including electromagnetic/radio-frequency interference, temperature, humidity, and smoke exposure. An experimental digital safety channel (EDSC) was constructed for the tests. SNL performed smoke exposure tests on digital components and circuit boards to determine failure mechanisms and the effect of different packaging techniques on smoke susceptibility. These studies are expected to provide recommendations for environmental qualification of digital safety systems by addressing the following: (1) adequacy of the present preferred test methods for qualification of digital I and C systems; (2) preferred standards; (3) recommended stressors to be included in the qualification process during type testing; (4) resolution of need for accelerated aging in qualification testing for equipment that is to be located in mild environments; and (5) determination of an appropriate approach to address smoke in a qualification program

  17. Remedial Action Assessment System: A computer-based methodology for conducting feasibility studies

    International Nuclear Information System (INIS)

    White, M.K.; Buelt, J.L.; Stottlemyre, J.A.

    1991-02-01

    Because of the complexity and number of potential waste sites facing the US Department of Energy (DOE) for potential cleanup, DOE is supporting the development of a computer-based methodology to streamline the remedial investigation/feasibility study process. The Remedial Action Assessment System (RAAS), can be used for screening, linking, and evaluating established technology processes in support of conducting feasibility studies. It is also intended to do the same in support of corrective measures studies. The user interface employs menus, windows, help features, and graphical information while RAAS is in operation. Object-oriented programming is used to link unit processes into sets of compatible processes that form appropriate remedial alternatives. Once the remedial alternatives are formed, the RAAS methodology can evaluate them in terms of effectiveness, implementability, and cost. RAAS will access a user-selected risk assessment code to determine the reduction of risk after remedial action by each recommended alternative. The methodology will also help determine the implementability of the remedial alternatives at a site and access cost estimating tools to provide estimates of capital, operating, and maintenance costs. This paper presents the characteristics of two RAAS prototypes currently being developed. These include the RAAS Technology Information System, which accesses graphical, tabular and textual information about technologies, and the main RAAS methodology, which screens, links, and evaluates remedial technologies. 4 refs., 3 figs., 1 tab

  18. Development of computer-based analytical tool for assessing physical protection system

    International Nuclear Information System (INIS)

    Mardhi, Alim; Pengvanich, Phongphaeth

    2016-01-01

    Assessment of physical protection system effectiveness is the priority for ensuring the optimum protection caused by unlawful acts against a nuclear facility, such as unauthorized removal of nuclear materials and sabotage of the facility itself. Since an assessment based on real exercise scenarios is costly and time-consuming, the computer-based analytical tool can offer the solution for approaching the likelihood threat scenario. There are several currently available tools that can be used instantly such as EASI and SAPE, however for our research purpose it is more suitable to have the tool that can be customized and enhanced further. In this work, we have developed a computer–based analytical tool by utilizing the network methodological approach for modelling the adversary paths. The inputs are multi-elements in security used for evaluate the effectiveness of the system’s detection, delay, and response. The tool has capability to analyze the most critical path and quantify the probability of effectiveness of the system as performance measure

  19. Development of computer-based analytical tool for assessing physical protection system

    Energy Technology Data Exchange (ETDEWEB)

    Mardhi, Alim, E-mail: alim-m@batan.go.id [National Nuclear Energy Agency Indonesia, (BATAN), PUSPIPTEK area, Building 80, Serpong, Tangerang Selatan, Banten (Indonesia); Chulalongkorn University, Faculty of Engineering, Nuclear Engineering Department, 254 Phayathai Road, Pathumwan, Bangkok Thailand. 10330 (Thailand); Pengvanich, Phongphaeth, E-mail: ppengvan@gmail.com [Chulalongkorn University, Faculty of Engineering, Nuclear Engineering Department, 254 Phayathai Road, Pathumwan, Bangkok Thailand. 10330 (Thailand)

    2016-01-22

    Assessment of physical protection system effectiveness is the priority for ensuring the optimum protection caused by unlawful acts against a nuclear facility, such as unauthorized removal of nuclear materials and sabotage of the facility itself. Since an assessment based on real exercise scenarios is costly and time-consuming, the computer-based analytical tool can offer the solution for approaching the likelihood threat scenario. There are several currently available tools that can be used instantly such as EASI and SAPE, however for our research purpose it is more suitable to have the tool that can be customized and enhanced further. In this work, we have developed a computer–based analytical tool by utilizing the network methodological approach for modelling the adversary paths. The inputs are multi-elements in security used for evaluate the effectiveness of the system’s detection, delay, and response. The tool has capability to analyze the most critical path and quantify the probability of effectiveness of the system as performance measure.

  20. Software development methodology for computer based I&C systems of prototype fast breeder reactor

    Energy Technology Data Exchange (ETDEWEB)

    Manimaran, M., E-mail: maran@igcar.gov.in; Shanmugam, A.; Parimalam, P.; Murali, N.; Satya Murty, S.A.V.

    2015-10-15

    Highlights: • Software development methodology adopted for computer based I&C systems of PFBR is detailed. • Constraints imposed as part of software requirements and coding phase are elaborated. • Compliance to safety and security requirements are described. • Usage of CASE (Computer Aided Software Engineering) tools during software design, analysis and testing phase are explained. - Abstract: Prototype Fast Breeder Reactor (PFBR) is sodium cooled reactor which is in the advanced stage of construction in Kalpakkam, India. Versa Module Europa bus based Real Time Computer (RTC) systems are deployed for Instrumentation & Control of PFBR. RTC systems have to perform safety functions within the stipulated time which calls for highly dependable software. Hence, well defined software development methodology is adopted for RTC systems starting from the requirement capture phase till the final validation of the software product. V-model is used for software development. IEC 60880 standard and AERB SG D-25 guideline are followed at each phase of software development. Requirements documents and design documents are prepared as per IEEE standards. Defensive programming strategies are followed for software development using C language. Verification and validation (V&V) of documents and software are carried out at each phase by independent V&V committee. Computer aided software engineering tools are used for software modelling, checking for MISRA C compliance and to carry out static and dynamic analysis. Various software metrics such as cyclomatic complexity, nesting depth and comment to code are checked. Test cases are generated using equivalence class partitioning, boundary value analysis and cause and effect graphing techniques. System integration testing is carried out wherein functional and performance requirements of the system are monitored.

  1. Software development methodology for computer based I&C systems of prototype fast breeder reactor

    International Nuclear Information System (INIS)

    Manimaran, M.; Shanmugam, A.; Parimalam, P.; Murali, N.; Satya Murty, S.A.V.

    2015-01-01

    Highlights: • Software development methodology adopted for computer based I&C systems of PFBR is detailed. • Constraints imposed as part of software requirements and coding phase are elaborated. • Compliance to safety and security requirements are described. • Usage of CASE (Computer Aided Software Engineering) tools during software design, analysis and testing phase are explained. - Abstract: Prototype Fast Breeder Reactor (PFBR) is sodium cooled reactor which is in the advanced stage of construction in Kalpakkam, India. Versa Module Europa bus based Real Time Computer (RTC) systems are deployed for Instrumentation & Control of PFBR. RTC systems have to perform safety functions within the stipulated time which calls for highly dependable software. Hence, well defined software development methodology is adopted for RTC systems starting from the requirement capture phase till the final validation of the software product. V-model is used for software development. IEC 60880 standard and AERB SG D-25 guideline are followed at each phase of software development. Requirements documents and design documents are prepared as per IEEE standards. Defensive programming strategies are followed for software development using C language. Verification and validation (V&V) of documents and software are carried out at each phase by independent V&V committee. Computer aided software engineering tools are used for software modelling, checking for MISRA C compliance and to carry out static and dynamic analysis. Various software metrics such as cyclomatic complexity, nesting depth and comment to code are checked. Test cases are generated using equivalence class partitioning, boundary value analysis and cause and effect graphing techniques. System integration testing is carried out wherein functional and performance requirements of the system are monitored

  2. Computer-based system for acquisition of nuclear well log data

    International Nuclear Information System (INIS)

    Meisner, J.E.

    1983-01-01

    There is described a computer-based well logging system, for acquiring nuclear well log data, including gamma ray energy spectrum and neutron population decay rate data, and providing a real-time presentation of the data on an operator's display based on a traversal by a downhole instrument of a prescribed borehole depth interval. The system has a multichannel analyzer including a pulse height analyzer and a memory. After a spectral gamma ray pulse signal coming from a downhole instrument over a logging cable is amplified and conditioned, the pulse height analyzer converts the pulse height into a digital code by peak detection, sample-and-hold action, and analog-to-digital conversion. The digital code defines the address of a memory location or channel, corresponding to a particular gamma ray energy and having a count value to be incremented. The spectrum data is then accessed by the system central processing unit (CPU) for analysis, and routed to the operator's display for presentation as a plot of relative gamma ray emissions activity versus energy level. For acquiring neutron decay rate data, the system has a multichannel scaling unit including a memory and a memory address generator. After a burst of neutrons downhole, thermal and epithermal neutron detector pulses build up and die away. Using the neutron source trigger as an initializing reference, the address generator produces a sequence of memory address codes, each code addressing the memory for a prescribed period of time, so as to define a series of time slots. A detector pulse signal produced during a time slot results in the incrementing of the count value in an address memory location. (author)

  3. Usability test of the ImPRO, computer-based procedure system

    International Nuclear Information System (INIS)

    Jung, Y.; Lee, J.

    2006-01-01

    ImPRO is a computer based procedure in both flowchart and success logic tree. It is evaluated on the basis of computer based procedure guidelines. It satisfies most requirements such as presentations and functionalities. Besides, SGTR has been performed with ImPRO to evaluate reading comprehension and situation awareness. ImPRO is a software engine which can interpret procedure script language, so that ImPRO is reliable by nature and verified with formal method. One bug, however, had hidden one year after release, but it was fixed. Finally backup paper procedures can be prepared on the same format as VDU in case of ImPRO failure. (authors)

  4. Remedial action assessment system (RAAS) - A computer-based methodology for conducting feasibility studies

    International Nuclear Information System (INIS)

    Buelt, J.L.; Stottlemyre, J.A.; White, M.K.

    1991-01-01

    Because of the great complexity and number of potential waste sites facing the US Department of Energy (DOE) for potential cleanup, the DOE is supporting the development of a computer-based methodology to streamline the remedial investigation/feasibility study process required for DOE operable units. DOE operable units are generally more complex in nature because of the existence of multiple waste sites within many of the operable units and the presence of mixed radioactive and hazardous chemical wastes. Consequently, Pacific Northwest Laboratory (PNL) is developing the Remedial Action Assessment System (RAAS), which is aimed at screening, linking, and evaluating established technology process options in support of conducting feasibility studies under the Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA). It is also intended to do the same in support of corrective measures studies required by the Resource Conservation and Recovery Act (RCRA). One of the greatest attributes of the RAAS project is that the computer interface with the user is being designed to be friendly, intuitive, and interactive. Consequently, the user interface employs menus, windows, help features, and graphical information while RAAS is in operation. During operation, each technology process option is represented by an open-quotes objectclose quotes module. Object-oriented programming is then used to link these unit processes into remedial alternatives. In this way, various object modules representing technology process options can communicate so that a linked set of compatible processes form an appropriate remedial alternative. Once the remedial alternatives are formed, they can be evaluated in terms of effectiveness, implementability, and cost

  5. Using a Computer-based Messaging System at a High School To Increase School/Home Communication.

    Science.gov (United States)

    Burden, Mitzi K.

    Minimal communication between school and home was found to contribute to low performance by students at McDuffie High School (South Carolina). This report describes the experience of establishing a computer-based telephone messaging system in the high school and involving parents, teachers, and students in its use. Additional strategies employed…

  6. Specifying computer-based counseling systems in health care: a new approach to user-interface and interaction design.

    Science.gov (United States)

    Herzberg, Dominikus; Marsden, Nicola; Kübler, Peter; Leonhardt, Corinna; Thomanek, Sabine; Jung, Hartmut; Becker, Annette

    2009-04-01

    Computer-based counseling systems in health care play an important role in the toolset available for medical doctors to inform, motivate and challenge their patients according to a well-defined therapeutic goal. The design, development and implementation of such systems require close collaboration between users, i.e. patients, and developers. While this is true of any software development process, it can be particularly challenging in the health counseling field, where there are multiple specialties and extremely heterogeneous user groups. In order to facilitate a structured design approach for counseling systems in health care, we developed (a) an iterative three-staged specification process, which enables early involvement of potential users in the development process, and (b) a specification language, which enables an author to consistently describe and define user interfaces and interaction designs in a stepwise manner. Due to the formal nature of our specifications, our implementation has some unique features, like early execution of prototypes, automated system generation and verification capabilities.

  7. Development of a Computer-Based Visualised Quantitative Learning System for Playing Violin Vibrato

    Science.gov (United States)

    Ho, Tracy Kwei-Liang; Lin, Huann-shyang; Chen, Ching-Kong; Tsai, Jih-Long

    2015-01-01

    Traditional methods of teaching music are largely subjective, with the lack of objectivity being particularly challenging for violin students learning vibrato because of the existence of conflicting theories. By using a computer-based analysis method, this study found that maintaining temporal coincidence between the intensity peak and the target…

  8. Automated Detection of Heuristics and Biases among Pathologists in a Computer-Based System

    Science.gov (United States)

    Crowley, Rebecca S.; Legowski, Elizabeth; Medvedeva, Olga; Reitmeyer, Kayse; Tseytlin, Eugene; Castine, Melissa; Jukic, Drazen; Mello-Thoms, Claudia

    2013-01-01

    The purpose of this study is threefold: (1) to develop an automated, computer-based method to detect heuristics and biases as pathologists examine virtual slide cases, (2) to measure the frequency and distribution of heuristics and errors across three levels of training, and (3) to examine relationships of heuristics to biases, and biases to…

  9. Computer based plant display and digital control system of Wolsong NPP Tritium Removal Facility

    International Nuclear Information System (INIS)

    Jung, C.; Smith, B.; Tosello, G.; Grosbois, J. de; Ahn, J.

    2007-01-01

    The Wolsong Tritium Removal Facility (WTRF) is an AECL-designed, first-of-a-kind facility that removes tritium from the heavy water that is used in systems of the CANDUM reactors in operation at the Wolsong Nuclear Power Plant in South Korea. The Plant Display and Control System (PDCS) provides digital plant monitoring and control for the WTRF and offers the advantages of state-of-the-art digital control system technologies for operations and maintenance. The overall features of the PDCS will be described and some of the specific approaches taken on the project to save construction time and costs, to reduce in-service life-cycle costs and to improve quality will be presented. The PDCS consists of two separate computer sub-systems: the Digital Control System (DCS) and the Plant Display System (PDS). The PDS provides the computer-based Human Machine Interface (HMI) for operators, and permits efficient supervisory or device level monitoring and control. A System Maintenance Console (SMC) is included in the PDS for the purpose of software and hardware configuration and on-line maintenance. A Historical Data System (HDS) is also included in the PDS as a data-server that continuously captures and logs process data and events for long-term storage and on-demand selective retrieval. The PDCS of WTRF has been designed and implemented based on an off-the-self PDS/DCS product combination, the Delta-V System from Emerson. The design includes fully redundant Ethernet network communications, controllers, power supplies and redundancy on selected I/O modules. The DCS provides field bus communications to interface with 3rd party controllers supplied on specialized skids, and supports HART communication with field transmitters. The DCS control logic was configured using a modular and graphical approach. The control strategies are primarily device control modules implemented as autonomous control loops, and implemented using IEC 61131-3 Function Block Diagram (FBD) and Structured

  10. Experiences with establishing and implementing learning management system and computer-based test system in medical college.

    Science.gov (United States)

    Park, Joo Hyun; Son, Ji Young; Kim, Sun

    2012-09-01

    The purpose of this study was to establish an e-learning system to support learning in medical education and identify solutions for improving the system. A learning management system (LMS) and computer-based test (CBT) system were established to support e-learning for medical students. A survey of 219 first- and second-grade medical students was administered. The questionnaire included 9 forced choice questions about the usability of system and 2 open-ended questions about necessary improvements to the system. The LMS consisted of a class management, class evaluation, and class attendance system. CBT consisted of a test management, item bank, and authoring tool system. The results of the survey showed a high level of satisfaction in all system usability items except for stability. Further, the advantages of the e-learning system were ensuring information accessibility, providing constant feedback, and designing an intuitive interface. Necessary improvements to the system were stability, user control, readability, and diverse device usage. Based on the findings, suggestions for developing an e-learning system to improve usability by medical students and support learning effectively are recommended.

  11. A versatile computer based system for data acquisition manipulation and presentation

    International Nuclear Information System (INIS)

    Bardsley, D.J.

    1985-12-01

    A data acquisition system based on the Microdata M 1600L data logger and a Digital Equipment Corporation (DEC) VT103 computer system has been set up for use in a wide range of research and development projects in the field of fission detectors and associated technology. The philosophy underlying the system and its important features are described. Operating instructions for the logger are given, and its application to experimental measurements is considered. Observations on whole system performance, and recommendations for improvements are made. (U.K.)

  12. Computer-Based Decision Support for Railroad Transportation Systems: an Investment Case Study

    Directory of Open Access Journals (Sweden)

    Luminita DUTA

    2009-01-01

    Full Text Available In the last decade the development of the economical and social life increased the complexity of transportation systems. In this context, the role of Decision Support Systems (DSS became more and more important. The paper presents the characteristics, necessity, and usage of DSS in transportation and describes a practical application in the railroad field. To compute the optimal transportation capacity and flow on a certain railroad, specialized decision-support software which is available on the market was used.

  13. A computer-based reporting system in radiology of the chest

    Energy Technology Data Exchange (ETDEWEB)

    Hundt, W.; Hundt, C.; Nissen-Meyer, S.; Kohz, P.; Fink, U.; Reiser, M. [Department of Diagnostic Radiology, Hospital of Grosshadern, Ludwig Maximilians University of Munich (Germany); Adelhard, K. [Department of Medical Informatics, Biometry and Epidemiology, Ludwig Maximilians University of Munich (Germany)

    1998-07-01

    The aim of this study was to compare our computer-aided report writing system to standard techniques. A computer-aided reporting system for reporting on chest X-rays was developed and linked with a UNIX-based radiology information system. The reporting system consists of different text modules which can be composed to a complete radiological report. The quality of the report, the system`s efficiency, flexibility and availability at the radiology information system (RIS), as well as its acceptance by the users, were criteria we took as a basis of evaluation. Acceptance and flexibility of the system were tested by assessing necessary changes and additions performed to text modules and by subjective evaluation. The time spent on working with the reporting system was evaluated by performing a time-analysis study comparing the new system to the two conventional methods, the tape system and handwriting. On average, the readers needed 22.6 text modules for each report. For the users the most important advantages of the new system are that primarily fewer changes to or additions to the text are necessary, and when they cannot be avoided they can be performed more easily. In comparison with the tape system and handwritten reports, it took on average two and a half to three times longer to report on a chest X-ray. The printed report had left the department within 6.4 h using the tape system within 0.4 h when handwritten and within 1.4 h when recorded by the reporting system. The completeness of the set of modules and the logical order were positively assessed by the users. The demand of time for reporting increases, but the final report is available sooner. (orig.) With 4 figs., 8 tabs., 13 refs.

  14. A computer-based reporting system in radiology of the chest

    International Nuclear Information System (INIS)

    Hundt, W.; Hundt, C.; Nissen-Meyer, S.; Kohz, P.; Fink, U.; Reiser, M.; Adelhard, K.

    1998-01-01

    The aim of this study was to compare our computer-aided report writing system to standard techniques. A computer-aided reporting system for reporting on chest X-rays was developed and linked with a UNIX-based radiology information system. The reporting system consists of different text modules which can be composed to a complete radiological report. The quality of the report, the system's efficiency, flexibility and availability at the radiology information system (RIS), as well as its acceptance by the users, were criteria we took as a basis of evaluation. Acceptance and flexibility of the system were tested by assessing necessary changes and additions performed to text modules and by subjective evaluation. The time spent on working with the reporting system was evaluated by performing a time-analysis study comparing the new system to the two conventional methods, the tape system and handwriting. On average, the readers needed 22.6 text modules for each report. For the users the most important advantages of the new system are that primarily fewer changes to or additions to the text are necessary, and when they cannot be avoided they can be performed more easily. In comparison with the tape system and handwritten reports, it took on average two and a half to three times longer to report on a chest X-ray. The printed report had left the department within 6.4 h using the tape system within 0.4 h when handwritten and within 1.4 h when recorded by the reporting system. The completeness of the set of modules and the logical order were positively assessed by the users. The demand of time for reporting increases, but the final report is available sooner. (orig.)

  15. An approach to the efficient assessment of safety and usability of computer based control systems, VeNuS 2. Global final report

    International Nuclear Information System (INIS)

    Nelke, T.; Dlugosch, C.; Olaverri Monreal, C.; Sachse, K.; Thuering, M.

    2015-01-01

    Prior to the use of computer-based instrumentation and control the evidence of sufficient safety, development methods and the suitability of man-machine interface must be provided. For this purpose, validation methods must be available, if possible supported by appropriate tools. Based on the multitude of the data which has to be taken into account it is important to generate technical documentation, to realize efficient operation and to prevent human based errors. An approach for computer based generation of user manuals for the operation of technical systems was developed in the VeNuS 2 project. A second goal was to develop an approach to evaluate the usability of safety relevant digital human-machine-interfaces (e.g. for nuclear industries). Therefore a software tool has been developed to assess aspects of usability of user interfaces by considering safety-related priorities. Additionally new or well known methods for provision of evidence of sufficient safety and usability for computer based systems shall be developed in a prototyped way.

  16. A Standard Mutual Authentication Protocol for Cloud Computing Based Health Care System.

    Science.gov (United States)

    Mohit, Prerna; Amin, Ruhul; Karati, Arijit; Biswas, G P; Khan, Muhammad Khurram

    2017-04-01

    Telecare Medical Information System (TMIS) supports a standard platform to the patient for getting necessary medical treatment from the doctor(s) via Internet communication. Security protection is important for medical records (data) of the patients because of very sensitive information. Besides, patient anonymity is another most important property, which must be protected. Most recently, Chiou et al. suggested an authentication protocol for TMIS by utilizing the concept of cloud environment. They claimed that their protocol is patient anonymous and well security protected. We reviewed their protocol and found that it is completely insecure against patient anonymity. Further, the same protocol is not protected against mobile device stolen attack. In order to improve security level and complexity, we design a light weight authentication protocol for the same environment. Our security analysis ensures resilience of all possible security attacks. The performance of our protocol is relatively standard in comparison with the related previous research.

  17. Flexusi Interface Builder For Computer Based Accelerator Monitoring And Control System

    CERN Document Server

    Kurakin, V G; Kurakin, P V

    2004-01-01

    We have developed computer code for any desired graphics user interface designing for monitoring and control system at the executable level. This means that operator can build up measurement console consisting of virtual devices before or even during real experiment without recompiling source file. Such functionality results in number of advantages comparing with traditional programming. First of all any risk disappears to introduce bug into source code. Another important thing is the fact the both program developers and operator staff do not interface in developing ultimate product (measurement console). Thus, small team without detailed project can design even very complicated monitoring and control system. For the reason mentioned below, approach suggested is especially helpful for large complexes to be monitored and control, accelerator being among them. The program code consists of several modules, responsible for data acquisition, control and representation. Borland C++ Builder technologies based on VCL...

  18. Computer-based data acquisition system in the Large Coil Test Facility

    International Nuclear Information System (INIS)

    Gould, S.S.; Layman, L.R.; Million, D.L.

    1983-01-01

    The utilization of computers for data acquisition and control is of paramount importance on large-scale fusion experiments because they feature the ability to acquire data from a large number of sensors at various sample rates and provide for flexible data interpretation, presentation, reduction, and analysis. In the Large Coil Test Facility (LCTF) a Digital Equipment Corporation (DEC) PDP-11/60 host computer with the DEC RSX-11M operating system coordinates the activities of five DEC LSI-11/23 front-end processors (FEPs) via direct memory access (DMA) communication links. This provides host control of scheduled data acquisition and FEP event-triggered data collection tasks. Four of the five FEPs have no operating system

  19. Fail-safe design criteria for computer-based reactor protection systems

    International Nuclear Information System (INIS)

    Keats, A.B.

    1980-01-01

    The increasing quantity and complexity of the instrumentation required in nuclear power plants provides a strong incentive for using on-line computers as the basis of the control and protection systems. On-line computers using multiplexed sampled data are already well established but their application to nuclear reactor protection systems requires special measures to satisfy the very high reliability which is demanded in the interests of safety and availability. Some existing codes of practice relating to segregation of replicated subsysttems continue to be applicable and lead to division of the computer functions into two distinct parts. The first computer, referred to as the Trip Algorithm Computer may also control the multiplexer. Voting on each group of status inputs yielded by the trip algorithm computers is performed by the Vote Algorithm Computer. The conceptual disparities between hardwired reactor-protection systems and those employing computers also rise to a need for some new criteria. An important objective of these criteria, minimising the need for a failure-mode-and-effect-analysis of the computer software, but is achieved almost entirely by 'hardware' properties of the system: the systematic use of hardwired test inputs which cause excursions of the trip algorithms into the tripped state in a uniquely ordered but easily recognisable sequence, and the use of hardwired 'pattern recognition logic' which generates a dynamic 'healthy' stimulus for the shutdown actuators only in response to the unique sequence generated by the hardwired input signal pattern. The adoption of the proposed design criteria ensure not only failure-to-safety in the hardware but the elimination, or at least minimisation, of the dependence on the correct functioning of the computer software for the safety system. (auth)

  20. ANALYSIS OF EFFECTIVENESS OF METHODOLOGICAL SYSTEM FOR PROBABILITY AND STOCHASTIC PROCESSES COMPUTER-BASED LEARNING FOR PRE-SERVICE ENGINEERS

    Directory of Open Access Journals (Sweden)

    E. Chumak

    2015-04-01

    Full Text Available The author substantiates that only methodological training systems of mathematical disciplines with implementation of information and communication technologies (ICT can meet the requirements of modern educational paradigm and make possible to increase the educational efficiency. Due to this fact, the necessity of developing the methodology of theory of probability and stochastic processes computer-based learning for pre-service engineers is underlined in the paper. The results of the experimental study for analysis of the efficiency of methodological system of theory of probability and stochastic processes computer-based learning for pre-service engineers are shown. The analysis includes three main stages: ascertaining, searching and forming. The key criteria of the efficiency of designed methodological system are the level of probabilistic and stochastic skills of students and their learning motivation. The effect of implementing the methodological system of probability theory and stochastic processes computer-based learning on the level of students’ IT literacy is shown in the paper. The expanding of the range of objectives of ICT applying by students is described by author. The level of formation of students’ learning motivation on the ascertaining and forming stages of the experiment is analyzed. The level of intrinsic learning motivation for pre-service engineers is defined on these stages of the experiment. For this purpose, the methodology of testing the students’ learning motivation in the chosen specialty is presented in the paper. The increasing of intrinsic learning motivation of the experimental group students (E group against the control group students (C group is demonstrated.

  1. Detailed requirements document for Stowage List and Hardware Tracking System (SLAHTS). [computer based information management system in support of space shuttle orbiter stowage configuration

    Science.gov (United States)

    Keltner, D. J.

    1975-01-01

    The stowage list and hardware tracking system, a computer based information management system, used in support of the space shuttle orbiter stowage configuration and the Johnson Space Center hardware tracking is described. The input, processing, and output requirements that serve as a baseline for system development are defined.

  2. O and M Experience with computer based system at captive power plant, HWP Manuguru

    International Nuclear Information System (INIS)

    Basu, S.; Kulkarni, R.S.

    1992-01-01

    Distributed digital control system has been the latest trend in the field of instrumentation and control system. In this paper effort is made to bring out the operation and maintenance experience of ASEA make DDC system at captive power plant, Heavy Water Project(HWP), Manuguru. (author). 2 refs., 1 fig

  3. The design development and commissioning of two distributed computer based boiler control systems

    International Nuclear Information System (INIS)

    Collier, D.; Johnstone, L.R.; Pringle, S.T.; Walker, R.W.

    1980-01-01

    The CEBG N.E. Region has recently commissioned two major boiler control schemes using distributed computer control system. Both systems have considerable development potential to allow modifications to meet changing operational requirements. The distributed approach to control was chosen in both instances so as to achieve high control system availability and as a method of easing the commissioning programs. The experience gained with these two projects has reinforced the view that distributed computer systems show advantages over centralised single computers especially if software is designed for the distributed system. (auth)

  4. ABWR (K-6/7) construction experience (computer-based safety system)

    International Nuclear Information System (INIS)

    Yokomura, T.

    1998-01-01

    TEPCO applied a digital safety system to Kashiwazaki-Kariwa Nuclear Power Station Unit Nos. 6 and 7, the world's first ABWR plant. Although this was the first time to apply a digital safety logic system in Japan, we were able to complete construction of K-6/7 very successfully and without any delay. TEPCO took a approach of developing a substantial amount of experience in digital non- safety systems before undertaking the design of the safety protection system. This paper describes the history, techniques and experience behind achieving a highly reliable digital safety system. (author)

  5. The MUSOS (MUsic SOftware System) Toolkit: A computer-based, open source application for testing memory for melodies.

    Science.gov (United States)

    Rainsford, M; Palmer, M A; Paine, G

    2018-04-01

    Despite numerous innovative studies, rates of replication in the field of music psychology are extremely low (Frieler et al., 2013). Two key methodological challenges affecting researchers wishing to administer and reproduce studies in music cognition are the difficulty of measuring musical responses, particularly when conducting free-recall studies, and access to a reliable set of novel stimuli unrestricted by copyright or licensing issues. In this article, we propose a solution for these challenges in computer-based administration. We present a computer-based application for testing memory for melodies. Created using the software Max/MSP (Cycling '74, 2014a), the MUSOS (Music Software System) Toolkit uses a simple modular framework configurable for testing common paradigms such as recall, old-new recognition, and stem completion. The program is accompanied by a stimulus set of 156 novel, copyright-free melodies, in audio and Max/MSP file formats. Two pilot tests were conducted to establish the properties of the accompanying stimulus set that are relevant to music cognition and general memory research. By using this software, a researcher without specialist musical training may administer and accurately measure responses from common paradigms used in the study of memory for music.

  6. Computer-based regulating control system for the Advanced Test Reactor

    International Nuclear Information System (INIS)

    Johnson, M.R.

    1983-01-01

    This paper describes a new control system which has recently been designed and installed at the Advanced Test Reactor at INEL, replacing an older system that had been in service for some 17 years. Based on modern digital technology, the new system provides improved capability, reliability, and an enhanced man/machine interface that includes comprehensive failure and error messages and voice synthesis. In addition to control functions, and transparent to the operator, the system performs continual on-line checks to sense subsystem failures and takes appropriate automatic action. In the maintenance mode, service technicians can carry on a dialog with the controller to quickly identify faulty components. The operational capabilities of the new system are summarized, and reactor operator training, experience, and acceptance of the system are discussed

  7. A high-performance data acquisition system for computer-based multichannel analyzer

    International Nuclear Information System (INIS)

    Zhou Xinzhi; Bai Rongsheng; Wen Liangbi; Huang Yanwen

    1996-01-01

    A high-performance data acquisition system applied in the multichannel analyzer is designed with single-chip microcomputer system. The paper proposes the principle and the method of realizing the simultaneous data acquisition, the data pre-processing, and the fast bidirectional data transfer by means of direct memory access based on dual-port RAM as well. The measurement for dead or live time of ADC system can also be implemented efficiently by using it

  8. Beyond redundancy how geographic redundancy can improve service availability and reliability of computer-based systems

    CERN Document Server

    Bauer, Eric; Eustace, Dan

    2012-01-01

    "While geographic redundancy can obviously be a huge benefit for disaster recovery, it is far less obvious what benefit is feasible and likely for more typical non-catastrophic hardware, software, and human failures. Georedundancy and Service Availability provides both a theoretical and practical treatment of the feasible and likely benefits of geographic redundancy for both service availability and service reliability. The text provides network/system planners, IS/IT operations folks, system architects, system engineers, developers, testers, and other industry practitioners with a general discussion about the capital expense/operating expense tradeoff that frames system redundancy and georedundancy"--

  9. An Interactive Computer-Based Circulation System for Northwestern University: The Library Puts It to Work

    Directory of Open Access Journals (Sweden)

    Velma Veneziano

    1972-06-01

    Full Text Available Northwestern University Library's on-line circulation system has resulted in dramatic changes in practices and procedures in the Circulation Services Section. After a hectic period of implementation, the staff soon began to adjust to the system. Over the past year and a half, they have devised ways to use the system to maximum advantage, so that manual and machine systems now mesh in close harmony. Freed from time-consuming clerical chores, the staff have been challenged to use their released time to best advantage, with the result that the "service" in "Circulation Services" is much closer to being a reality.

  10. ASN.1 notation for exchange of data in computer-based railway control systems

    Directory of Open Access Journals (Sweden)

    Zbigniew ŁUKASIK

    2009-01-01

    Full Text Available Development of railway control systems aims at computerization. In most cases these systems are Distributed Real Time Systems. However, a huge problem in their putting into practice is the lack of interface standardization in the range of data structures and information exchange methods. It results in a variety of solutions, and thus in problems concerning cooperation of systems that come from different software vendors. Specification of protocols for data exchanging applications should therefore be created with the use of generally accepted standards. One of them is ASN.1 (Abstract Syntax Notation One language, which shall be presented in this article.

  11. Importance analysis for reconfigurable systems

    International Nuclear Information System (INIS)

    Si, Shubin; Levitin, Gregory; Dui, Hongyan; Sun, Shudong

    2014-01-01

    Importance measures are used in reliability engineering to rank the system components according to their contributions to proper functioning of the entire system and to find the most effective ways of reliability enhancement. Traditionally, the importance measures do not consider the possible change of system structure with the improvement of specific component reliability. However, if a component's reliability changes, the optimal system structure/configuration may also change and the importance of the corresponding component will depend on the chosen structure. When the most promising component reliability improvement is determined, the component importance should be taken into account with respect to the possible structure changes. This paper studies the component reliability importance indices with respect to the changes of the optimal component sequencing. This importance measure indicates the critical components in providing the system reliability enhancement by both enhancing the component's reliability and reconfiguring the system. Examples of linear consecutive-k-out-of-n: F and G systems are considered to demonstrate the change of the component Birnbaum importance with the optimal system reconfiguration. The results show that the change of the importance index corresponds to the change of the system optimal configuration and the importance index can change not monotonically with the variation of the component reliability

  12. Comparison of Computer-Based Versus Counselor-Based Occupational Information Systems with Disadvantaged Vocational Students

    Science.gov (United States)

    Maola, Joseph; Kane, Gary

    1976-01-01

    Subjects, who were Occupational Work Experience students, were randomly assigned to individual guidance from either a computerized occupational information system, to a counselor-based information system or to a control group. Results demonstrate a hierarchical learning effect: The computer group learned more than the counseled group, which…

  13. The Potential of Computer-Based Expert Systems for Special Educators in Rural Settings.

    Science.gov (United States)

    Parry, James D.; Ferrara, Joseph M.

    Knowledge-based expert computer systems are addressing issues relevant to all special educators, but are particularly relevant in rural settings where human experts are less available because of distance and cost. An expert system is an application of artificial intelligence (AI) that typically engages the user in a dialogue resembling the…

  14. Computer based systems for fast reactor core temperature monitoring and protection

    International Nuclear Information System (INIS)

    Wall, D.N.

    1991-01-01

    Self testing fail safe trip systems and guardlines have been developed using dynamic logic as a basis for temperature monitoring and temperature protection in the UK. The guardline and trip system have been tested in passive operation on a number of reactors and a pulse coded logic guardline is currently in use on the DIDO test reactor. Acoustic boiling noise and ultrasonic systems have been developed in the UK as diverse alternatives to using thermocouples for temperature monitoring and measurement. These systems have the advantage that they make remote monitoring possible but they rely on complex signal processing to achieve their output. The means of incorporating such systems within the self testing trip system architecture are explored and it is apparent that such systems, particularly that based on ultrasonics has great potential for development. There remain a number of problems requiring detailed investigation in particular the verification of the signal processing electronics and trip software. It is considered that these problems while difficult are far from insurmountable and this work should result in the production of protection and monitoring systems suitable for deployment on the fast reactor. 6 figs

  15. The foundation of computer based closed radionuclide sources turnover control system in Moscow city region

    International Nuclear Information System (INIS)

    Gusev, A.E.; Kozlov, A.A.; Lavrov, K.N.; Sobolev, I.A.

    1998-01-01

    This paper concerns the problem of Closed Radionuclide Sources (CRS) automated account and control in Moscow city and Moscow region. Information relations structure between authorities and enterprises is shown. Special computer oriented system of CRS turnover monitoring is used for this purposes. Its possibilities and numeric characteristics of database are mentioned. This system benefit and application aspects are discussed in detail. (author)

  16. Computer based training for NPP personnel (interactive communication systems and functional trainers)

    International Nuclear Information System (INIS)

    Martin, H.D.

    1987-01-01

    KWU as a manufacturer of thermal and nuclear power plants has extensive customer training obligations within its power plant contracts. In this respect KWU has gained large experience in training of personnel, in the production of training material including video tapes an in the design of simulators. KWU developed interactive communication systems (ICS) for training and retraining purposes with a personal computer operating a video disc player on which video instruction is stored. The training program is edited with the help of a self developed editing system which enables the author to easily enter his instructions into the computer. ICS enables the plant management to better monitor the performance of its personnel through computerized training results and helps to save training manpower. German NPPs differ very much from other designs with respect to a more complex and integrated reactor control system and an additional reactor limitation system. Simulators for such plants therefore have also to simulate these systems. KWU developed a Functional Trainer (FT) which is a replica of the primary system, the auxiliary systems linked to it and the associated control, limitation and protection systems including the influences of the turbine operation and control

  17. Information Display: Considerations for Designing Modern Computer-Based Display Systems

    International Nuclear Information System (INIS)

    O'Hara, J.; Pirus, D.; Beltracchi, L.

    2003-01-01

    OAK- B135 To help nuclear utilities and suppliers design and implement plant information management systems and displays that provide accurate and timely information and require minimal navigation and interface management

  18. Radiation interlocks - The choice between conventional hard-wired logic and computer-based systems

    International Nuclear Information System (INIS)

    Crook, K.F.

    1987-01-01

    During the past few years, the use of computers in radiation safety systems has become more widespread. This is not surprising given the ubiquitous nature of computers in the modern technological world. But is a computer a good choice for the central logic element of a personnel safety system? Recent accidents at computer controlled medical accelerators would indicate that extreme care must be exercised if malfunctions are to be avoided. The Department of Energy (DOE) has recently established a sub-committee to formulate recommendations on the use of computers in safety systems for accelerators. This paper reviews the status of the committee's recommendations, and describes radiation protection interlock systems as applied to both accelerators and to irradiation facilities. Comparisons are made between the conventional (relay) approach and designs using computers

  19. A computer-based spectrometry system for assessment of body radioactivity

    International Nuclear Information System (INIS)

    Venn, J.B.

    1985-01-01

    This paper describes a PDP-11 computer system operating under RT-11 for the acquisition and processing of pulse height spectra in the measurement of body radioactivity. SABRA (system for the assessment of body radioactivity) provides control of multiple detection systems from visual display consoles by means of a command language. A wide range of facilities is available for the display, processing and storage of acquired spectra and complex operations may be pre-programmed by means of the SABRE MACRO language. The hardware includes a CAMAC interface to the detection systems, disc cartridge drives for mass storage of data and programs, and data-links to other computers. The software is written in assembler language and includes special features for the dynamic allocation of computer memory and for safeguarding acquired data. (orig.)

  20. Battle Staff Training System II: Computer-Based Instruction Supporting the Force XXI Training Program

    National Research Council Canada - National Science Library

    Wampler, Richard

    1998-01-01

    This report documents the methodology and lessons learned in the development of the Innovative Tools and Techniques for Brigade and Below Staff Training II - Battle Staff Training System II (ITTBBST-BSTS II...

  1. Enhancing performance of next generation FSO communication systems using soft computing-based predictions.

    Science.gov (United States)

    Kazaura, Kamugisha; Omae, Kazunori; Suzuki, Toshiji; Matsumoto, Mitsuji; Mutafungwa, Edward; Korhonen, Timo O; Murakami, Tadaaki; Takahashi, Koichi; Matsumoto, Hideki; Wakamori, Kazuhiko; Arimoto, Yoshinori

    2006-06-12

    The deterioration and deformation of a free-space optical beam wave-front as it propagates through the atmosphere can reduce the link availability and may introduce burst errors thus degrading the performance of the system. We investigate the suitability of utilizing soft-computing (SC) based tools for improving performance of free-space optical (FSO) communications systems. The SC based tools are used for the prediction of key parameters of a FSO communications system. Measured data collected from an experimental FSO communication system is used as training and testing data for a proposed multi-layer neural network predictor (MNNP) used to predict future parameter values. The predicted parameters are essential for reducing transmission errors by improving the antenna's accuracy of tracking data beams. This is particularly essential for periods considered to be of strong atmospheric turbulence. The parameter values predicted using the proposed tool show acceptable conformity with original measurements.

  2. Radiation interlocks: The choice between conventional hard-wired logic and computer-based systems

    International Nuclear Information System (INIS)

    Crook, K.F.

    1986-11-01

    During the past few years, the use of computers in radiation safety systems has become more widespread. This is not surprising given the ubiquitous nature of computers in the modern technological world. But is a computer a good choice for the central logic element of a personnel safety system. Recent accidents at computer controlled medical accelerators would indicate that extreme care must be exercised if malfunctions are to be avoided. The Department of Energy has recently established a sub-committee to formulate recommendations on the use of computers in safety systems for accelerators. This paper will review the status of the committee's recommendations, and describe radiation protection interlock systems as applied to both accelerators and to irradiation facilities. Comparisons are made between the conventional relay approach and designs using computers. 6 refs., 6 figs

  3. Front end embedded microprocessors in the JET computer-based control system, past, present and future

    International Nuclear Information System (INIS)

    Steed, C.A.; VanderBeken, H.; Browne, M.L.; Fullard, K.; Reed, K.; Tilley, M.; Schmidt, V.

    1987-01-01

    A brief history of the use of Front End Microprocessors in the JET Control and Data Acquisition System (CODAS) is presented. The present expansion in their use from 2 or 3 in 1983 to 27 now, is covered along with the reasoning behind their present usage. Finally, their future planned use in the area of remote handling is discussed and the authors present views on the use of front end processing in future large distributed control systems are presented

  4. Caracteristiques de trois systemes informatiques de transcription phonetique et graphemique (Characteristics of Three Computer-Based Systems of Phonetic and Graphemic Transcription).

    Science.gov (United States)

    Marty, Fernand

    Three computer-based systems for phonetic/graphemic transcription of language are described, compared, and contrasted. The text is entirely in French, with examples given from the French language. The three approaches to transcription are: (1) text entered in standard typography and exiting in phonetic transcription with markers for rhythmic…

  5. A computer based system for prioritizing pollution prevention opportunity assessments at SNL/NM

    International Nuclear Information System (INIS)

    Custer, M.S.; Leishman, N.L.; Walsh, M.L.; Nelson, J.D.; Davis, R.L.; Bueno, N.C.

    1996-01-01

    Prioritizing waste generators is necessary to determine which are the best candidates for Pollution Prevention Opportunity Assessments (PPOAs). This paper describes the Sandia National Laboratories/New Mexico (SNL/NM) PPOA Ranking System. The system uses a multimedia approach that considers hazardous and radioactive waste disposal data, and hazardous chemical usage data (from which air emissions are extrapolated). Pollution prevention information is included, from the SNL Pollution Prevention Opportunities database that identifies waste streams that have readily apparent pollution prevention opportunities. The system also considers the relative costs of waste management and the chargeback fees paid for waste generation. From these data, organizations are ranked with an algorithm developed in Microsoft Access trademark on a personal computer. The concept could readily be transferred to other facilities needing to decide where to perform PPOAs

  6. Computer-based accountability system (Phase I) for special nuclear materials at Argonne-West

    International Nuclear Information System (INIS)

    Ingermanson, R.S.; Proctor, A.E.

    1982-05-01

    An automated accountability system for special nuclear materials (SNM) is under development at Argonne National Laboratory-West. Phase I of the development effort has established the following basic features of the system: a unique file organization allows rapid updating or retrieval of the status of various SNM, based on batch numbers, storage location, serial number, or other attributes. Access to the program is controlled by an interactive user interface that can be easily understood by operators who have had no prior background in electronic data processing. Extensive use of structured programming techniques make the software package easy to understand and to modify for specific applications. All routines are written in FORTRAN

  7. Gaby: a computer-based support system for integrated pest management in Dutch apple orchards

    NARCIS (Netherlands)

    Ende, van den E.; Blommers, L.; Trapman, M.

    1996-01-01

    In The Netherlands, a computerized advisory system (called Gaby) for integrated pest management (IPM) in apple has been developed to support the decision making of individual fruit growers. Gaby provides clear monitoring recommendations when this is appropriate for a particular pest in (a defined

  8. Increased productivity in power plants by the computer-based information system PRAUT

    International Nuclear Information System (INIS)

    Hanbaba, P.

    1978-01-01

    Decrease of commissionning times, reduction of shut-down periods, avoiding of power reductions, fast adaption to load requirement variations act in the direction of increasing the productivity of a power plant. An essential contribution to this is provided by harmonized control, monitoring and communications concepts as realized, e.g. in the PRO-CONTROL system by Brown Boveri. (orig.) [de

  9. A Soft Computing Based Approach Using Modified Selection Strategy for Feature Reduction of Medical Systems

    Directory of Open Access Journals (Sweden)

    Kursat Zuhtuogullari

    2013-01-01

    Full Text Available The systems consisting high input spaces require high processing times and memory usage. Most of the attribute selection algorithms have the problems of input dimensions limits and information storage problems. These problems are eliminated by means of developed feature reduction software using new modified selection mechanism with middle region solution candidates adding. The hybrid system software is constructed for reducing the input attributes of the systems with large number of input variables. The designed software also supports the roulette wheel selection mechanism. Linear order crossover is used as the recombination operator. In the genetic algorithm based soft computing methods, locking to the local solutions is also a problem which is eliminated by using developed software. Faster and effective results are obtained in the test procedures. Twelve input variables of the urological system have been reduced to the reducts (reduced input attributes with seven, six, and five elements. It can be seen from the obtained results that the developed software with modified selection has the advantages in the fields of memory allocation, execution time, classification accuracy, sensitivity, and specificity values when compared with the other reduction algorithms by using the urological test data.

  10. DTREEv2, a computer-based support system for the risk assessment of genetically modified plants

    NARCIS (Netherlands)

    Pertry, I.; Nothegger, C.; Sweet, J.; Kuiper, H.A.; Davies, H.; Iserentant, D.; Hull, R.; Mezzetti, B.; Messens, K.; Loose, De M.; Oliveira, de D.; Burssens, S.; Gheysen, G.; Tzotzos, G.

    2014-01-01

    Risk assessment of genetically modified organisms (GMOs) remains a contentious area and a major factor influencing the adoption of agricultural biotech. Methodologically, in many countries, risk assessment is conducted by expert committees with little or no recourse to databases and expert systems

  11. Making alliances work -- Using a computer-based management system to integrate the supply chain

    International Nuclear Information System (INIS)

    Johnson, J.B.; Randolph, S.

    1995-01-01

    Traditionally, price has been king in the selection of suppliers and service companies in the upstream oil and gas market. Three years ago, Amoco began to question this selection practice and embarked on an extensive benchmarking effort that has led the company to a proven strategy for goods and services procurement called supply-chain management (SCM). However, the company found that managing compact, integrated supply chains is not always easy. Several implementation issues need to be reconciled for alliances to achieve their full bottom-line potential benefits consistently. Issues that must be resolved, whether they are called alliances, supply chains, or integrated services, are (1) whether these new working relationships are profitable for all the entities involved, from suppliers through to end users; (2) how to assess and improve risk management; (3) how to reduce total system costs; and (4) how to improve performance for each of the alliance members and for the alliance as a whole. This brief describes one possible solution to the complex issues involved in making alliances work: a computer-facilitated management system designed to integrate the work processes of different organizations. In the case described, the Drilling Management System (DMS) was developed and used by the Amoco (U.K.) Well Dept. The system uses off-the-shelf commercial software to improve the performance of the company's drilling operations by integrating the activities of the company and its suppliers

  12. A soft computing based approach using modified selection strategy for feature reduction of medical systems.

    Science.gov (United States)

    Zuhtuogullari, Kursat; Allahverdi, Novruz; Arikan, Nihat

    2013-01-01

    The systems consisting high input spaces require high processing times and memory usage. Most of the attribute selection algorithms have the problems of input dimensions limits and information storage problems. These problems are eliminated by means of developed feature reduction software using new modified selection mechanism with middle region solution candidates adding. The hybrid system software is constructed for reducing the input attributes of the systems with large number of input variables. The designed software also supports the roulette wheel selection mechanism. Linear order crossover is used as the recombination operator. In the genetic algorithm based soft computing methods, locking to the local solutions is also a problem which is eliminated by using developed software. Faster and effective results are obtained in the test procedures. Twelve input variables of the urological system have been reduced to the reducts (reduced input attributes) with seven, six, and five elements. It can be seen from the obtained results that the developed software with modified selection has the advantages in the fields of memory allocation, execution time, classification accuracy, sensitivity, and specificity values when compared with the other reduction algorithms by using the urological test data.

  13. Computer-based Monitoring for Decision Support Systems and Disaster Preparedness in Buildings

    Directory of Open Access Journals (Sweden)

    Alan Vinh

    2009-04-01

    Full Text Available The operation of modern buildings can support a vast amount of static and real-time data. Static information such as building schematics is vital for security and rescue purposes. There is a need for building managers and for first responders to be notified of designated building alerts in real-time so that actions can be performed promptly. The capability to monitor building devices and to keep the first responder community updated with the latest building information during emergency situations, as well as the ability to remotely control certain building devices and processes, can be realized today. This paper describes the various challenges encountered in the research area of building interoperability and proposes methods and insights for developing a standards framework to enable communication between building information systems and first responder information systems. Having a standards framework in place will assist in the development and deployment of commercial products in support of building interoperability.

  14. Potential applications of artificial intelligence in computer-based management systems for mixed waste incinerator facility operation

    International Nuclear Information System (INIS)

    Rivera, A.L.; Singh, S.P.N.; Ferrada, J.J.

    1991-01-01

    The Department of Energy/Oak Ridge Field Office (DOE/OR) operates a mixed waste incinerator facility at the Oak Ridge K-25 Site, designed for the thermal treatment of incinerable liquid, sludge, and solid waste regulated under the Toxic Substances Control Act (TSCA) and the Resource Conversion and Recovery Act (RCRA). Operation of the TSCA Incinerator is highly constrained as a result of the regulatory, institutional, technical, and resource availability requirements. This presents an opportunity for applying computer technology as a technical resource for mixed waste incinerator operation to facilitate promoting and sustaining a continuous performance improvement process while demonstrating compliance. This paper describes mixed waste incinerator facility performance-oriented tasks that could be assisted by Artificial Intelligence (AI) and the requirements for AI tools that would implement these algorithms in a computer-based system. 4 figs., 1 tab

  15. Computer-based nuclear radiation detection and instrumentation teaching laboratory system

    International Nuclear Information System (INIS)

    Ellis, W.H.; He, Q.

    1993-01-01

    The integration of computers into the University of Florida's Nuclear Engineering Sciences teaching laboratories is based on the innovative use of MacIntosh 2 microcomputers, IEEE-488 (GPIB) communication and control bus system and protocol, compatible modular nuclear instrumentation (NIM) and test equipment, LabVIEW graphics and applications software, with locally prepared, interactive, menu-driven, HyperCard based multi-exercise laboratory instruction sets and procedures. Results thus far have been highly successful with the majority of the laboratory exercises having been implemented

  16. Usability Study of a Computer-Based Self-Management System for Older Adults with Chronic Diseases

    Science.gov (United States)

    Tao, Da

    2012-01-01

    Background Usability can influence patients’ acceptance and adoption of a health information technology. However, little research has been conducted to study the usability of a self-management health care system, especially one geared toward elderly patients. Objective This usability study evaluated a new computer-based self-management system interface for older adults with chronic diseases, using a paper prototype approach. Methods Fifty older adults with different chronic diseases participated. Two usability evaluation methods were involved: (1) a heuristics evaluation and (2) end-user testing with a think-aloud testing method, audio recording, videotaping, and interviewing. A set of usability metrics was employed to determine the overall system usability, including task incompletion rate, task completion time, frequency of error, frequency of help, satisfaction, perceived usefulness, and perceived ease of use. Interviews were used to elicit participants’ comments on the system design. The quantitative data were analyzed using descriptive statistics and the qualitative data were analyzed for content. Results The participants were able to perform the predesigned self-management tasks with the current system design and they expressed mostly positive responses about the perceived usability measures regarding the system interface. However, the heuristics evaluation, performance measures, and interviews revealed a number of usability problems related to system navigation, information search and interpretation, information presentation, and readability. Design recommendations for further system interface modifications were discussed. Conclusions This study verified the usability of the self-management system developed for older adults with chronic diseases. Also, we demonstrated that our usability evaluation approach could be used to quickly and effectively identify usability problems in a health care information system at an early stage of the system development

  17. Personal computer based decision support system for routing nuclear spent fuel

    International Nuclear Information System (INIS)

    Chin, Shih-Miao; Joy, D.S.; Johnson, P.E.; Bobic, S.M.; Miaou, Shaw-Pin

    1989-01-01

    An approach has been formulated to route nuclear spent fuel over the US Interstate highway network. This approach involves the generation of alternative routes so that any potential adverse impacts will not only concentrate on regions along the shortest path between the nuclear power plant and repository. Extensive literature research on the shortest path finding algorithms has been carried out. Consequently, an extremely efficient shortest path algorithm has been implemented and significantly increases the overall system performance. State-of-the-art interactive computer graphics is used. In addition to easy-to-use pop-up menus, full color mapping and display capabilities are also incorporated. All of these features have been implemented on commonly available personal computers. 6 figs., 2 tabs

  18. Qualification of integrated tool environments (QUITE) for the development of computer-based safety systems in NPP

    International Nuclear Information System (INIS)

    Miedl, Horst

    2004-01-01

    In NPP I et C systems are back fitted meanwhile increasingly by computer-based systems (I et C platforms). The corresponding safety functions are implemented by software, and this software is developed, configured and administrated with the help of integrated tool environments (ITE). An ITE offers a set of services which are used to construct an I et C system and consist typically of software packages for project control and documentation, specification and design, automatic code generation and so on. Commercial ITE are not necessarily conceived and qualified (type-tested) for nuclear specific applications but are used - and will increasingly be used - for the implementation of nuclear safety related I et C systems. Therefor, it is necessary to qualify commercial ITE with respect to their influence on the quality of the target system for each I et C platform (dependent on the safety category of the target system). Examples for commercial ITEs are I et C platforms like SPINLINE 3, TELEPERM XP, Common Q, TRICON, etc. (Author)

  19. A Computer-Based Glucose Management System Reduces the Incidence of Forgotten Glucose Measurements: A Retrospective Observational Study.

    Science.gov (United States)

    Okura, Tsuyoshi; Teramoto, Kei; Koshitani, Rie; Fujioka, Yohei; Endo, Yusuke; Ueki, Masaru; Kato, Masahiko; Taniguchi, Shin-Ichi; Kondo, Hiroshi; Yamamoto, Kazuhiro

    2018-04-17

    Frequent glucose measurements are needed for good blood glucose control in hospitals; however, this requirement means that measurements can be forgotten. We developed a novel glucose management system using an iPod ® and electronic health records. A time schedule system for glucose measurement was developed using point-of-care testing, an iPod ® , and electronic health records. The system contains the glucose measurement schedule and an alarm sounds if a measurement is forgotten. The number of times measurements were forgotten was analyzed. Approximately 7000 glucose measurements were recorded per month. Before implementation of the system, the average number of times measurements were forgotten was 4.8 times per month. This significantly decreased to 2.6 times per month after the system started. We also analyzed the incidence of forgotten glucose measurements as a proportion of the total number of measurements for each period and found a significant difference between the two 9-month periods (43/64,049-24/65,870, P = 0.014, chi-squared test). This computer-based blood glucose monitoring system is useful for the management of glucose monitoring in hospitals. Johnson & Johnson Japan.

  20. A computer-based system for environmental impact assessment (EIA) applications to energy power stations in Turkey: CEDINFO

    International Nuclear Information System (INIS)

    Say, Nuriye Peker; Yuecel, Muzaffer; Yilmazer, Mehmet

    2007-01-01

    Environmental impact assessment (EIA) is a tool for decision makers to take into account the possible effects of a proposed project on the environment and is also a process for collecting the data related to a project design and project area. Different techniques are used for the EIA process. In recent years, including the design and development of databases, classification systems, computer models and expert systems have been used extensively in impact assessment studies. Knowledge-based systems referred to as expert systems and different computer-based systems are an emerging technology in information processing and are becoming increasingly useful tools in different applications areas including EIA studies. Their use for EIA has been quite limited in developing countries, because of the constraints on resources, particularly in expertise and data. In this study, a knowledge-based software-CEDINFO-developed by authors was introduced. CEDINFO to be used for EIA practices on energy-generating stations was designed based on the legal EIA process in Turkey. According to the EIA Regulation enacted in Turkey in 1993, energy-generating stations (thermal power station, hydraulic station, nuclear station) in different categories require mandatory EIA reports duly approved by The Ministry of Environment and Forestry before their construction. CEDINFO primarily aims to provide educational support for EIA practices and decision-makers on energy-generating stations

  1. A computer-based system for environmental impact assessment (EIA) applications to energy power stations in Turkey: CEDINFO

    Energy Technology Data Exchange (ETDEWEB)

    Say, Nuriye Peker; Yuecel, Muzaffer [Cukurova University, Adana (Turkey). Department of Landscape Architecture; Yilmazer, Mehmet [Bogazici University, Kandilli, Istanbul (Turkey). Kandilli Observatory and Earthquake Research Institute

    2007-12-15

    Environmental impact assessment (EIA) is a tool for decision makers to take into account the possible effects of a proposed project on the environment and is also a process for collecting the data related to a project design and project area. Different techniques are used for the EIA process. In recent years, including the design and development of databases, classification systems, computer models and expert systems have been used extensively in impact assessment studies. Knowledge-based systems referred to as expert systems and different computer-based systems are an emerging technology in information processing and are becoming increasingly useful tools in different applications areas including EIA studies. Their use for EIA has been quite limited in developing countries, because of the constraints on resources, particularly in expertise and data. In this study, a knowledge-based software - CEDINFO - developed by authors was introduced. CEDINFO to be used for EIA practices on energy-generating stations was designed based on the legal EIA process in Turkey. According to the EIA Regulation enacted in Turkey in 1993, energy-generating stations (thermal power station, hydraulic station, nuclear station) in different categories require mandatory EIA reports duly approved by The Ministry of Environment and Forestry before their construction. CEDINFO primarily aims to provide educational support for EIA practices and decision-makers on energy-generating stations. (author)

  2. A computer-based system for environmental impact assessment (EIA) applications to energy power stations in Turkey: CEDINFO

    Energy Technology Data Exchange (ETDEWEB)

    Nuriye Peker Say; Muzaffer Yucel; Mehmet Yilmazer [Cukurova University, Adana (Turkey). Department of Landscape Architecture

    2007-12-15

    Environmental impact assessment (EIA) is a tool to enable decision makers to account for the possible effects of a proposed project on the environment and is also a process for collecting the data related to a project design and project area. Different techniques are used for the EIA process. In recent years, including the design and development of databases, classification systems, computer models and expert systems have been used extensively in impact assessment studies. Knowledge-based systems referred to as expert systems and different computer-based systems are an emerging technology in information processing and are becoming increasingly useful tools in different applications areas including EIA studies. Their use for EIA has been quite limited in developing countries, because of the constraints on resources, particularly in expertise and data. In this study, a knowledge-based software CEDINFO developed by authors was introduced. CEDINFO to be used for EIA practices on energy-generating stations was designed based on the legal EIA process in Turkey. According to the EIA Regulation enacted in Turkey in 1993, energy-generating stations (thermal power stations, hydroelectric power stations, nuclear power stations) in different categories require mandatory EIA reports duly approved by The Ministry of Environment and Forestry before their construction. CEDINFO primarily aims to provide educational support for EIA practices and decision-makers on energy-generating stations. 23 refs., 5 figs., 2 tabs.

  3. Advanced computer-based training

    Energy Technology Data Exchange (ETDEWEB)

    Fischer, H D; Martin, H D

    1987-05-01

    The paper presents new techniques of computer-based training for personnel of nuclear power plants. Training on full-scope simulators is further increased by use of dedicated computer-based equipment. An interactive communication system runs on a personal computer linked to a video disc; a part-task simulator runs on 32 bit process computers and shows two versions: as functional trainer or as on-line predictor with an interactive learning system (OPAL), which may be well-tailored to a specific nuclear power plant. The common goal of both develoments is the optimization of the cost-benefit ratio for training and equipment.

  4. Advanced computer-based training

    International Nuclear Information System (INIS)

    Fischer, H.D.; Martin, H.D.

    1987-01-01

    The paper presents new techniques of computer-based training for personnel of nuclear power plants. Training on full-scope simulators is further increased by use of dedicated computer-based equipment. An interactive communication system runs on a personal computer linked to a video disc; a part-task simulator runs on 32 bit process computers and shows two versions: as functional trainer or as on-line predictor with an interactive learning system (OPAL), which may be well-tailored to a specific nuclear power plant. The common goal of both develoments is the optimization of the cost-benefit ratio for training and equipment. (orig.) [de

  5. Sensitivity analysis on the effect of software-induced common cause failure probability in the computer-based reactor trip system unavailability

    International Nuclear Information System (INIS)

    Kamyab, Shahabeddin; Nematollahi, Mohammadreza; Shafiee, Golnoush

    2013-01-01

    Highlights: ► Importance and sensitivity analysis has been performed for a digitized reactor trip system. ► The results show acceptable trip unavailability, for software failure probabilities below 1E −4 . ► However, the value of Fussell–Vesley indicates that software common cause failure is still risk significant. ► Diversity and effective test is founded beneficial to reduce software contribution. - Abstract: The reactor trip system has been digitized in advanced nuclear power plants, since the programmable nature of computer based systems has a number of advantages over non-programmable systems. However, software is still vulnerable to common cause failure (CCF). Residual software faults represent a CCF concern, which threat the implemented achievements. This study attempts to assess the effectiveness of so-called defensive strategies against software CCF with respect to reliability. Sensitivity analysis has been performed by re-quantifying the models upon changing the software failure probability. Importance measures then have been estimated in order to reveal the specific contribution of software CCF in the trip failure probability. The results reveal the importance and effectiveness of signal and software diversity as applicable strategies to ameliorate inefficiencies due to software CCF in the reactor trip system (RTS). No significant change has been observed in the rate of RTS failure probability for the basic software CCF greater than 1 × 10 −4 . However, the related Fussell–Vesley has been greater than 0.005, for the lower values. The study concludes that consideration of risk associated with the software based systems is a multi-variant function which requires compromising among them in more precise and comprehensive studies

  6. Computer Based Modelling and Simulation

    Indian Academy of Sciences (India)

    Home; Journals; Resonance – Journal of Science Education; Volume 6; Issue 3. Computer Based Modelling and Simulation - Modelling Deterministic Systems. N K Srinivasan. General Article Volume 6 Issue 3 March 2001 pp 46-54. Fulltext. Click here to view fulltext PDF. Permanent link:

  7. Computer Based Modelling and Simulation

    Indian Academy of Sciences (India)

    GENERAL I ARTICLE. Computer Based ... universities, and later did system analysis, ... sonal computers (PC) and low cost software packages and tools. They can serve as useful learning experience through student projects. Models are .... Let us consider a numerical example: to calculate the velocity of a trainer aircraft ...

  8. Computer-based test system for the Tactical Airfield Attack Munition (TAAM) safing, arming, and fuzing system

    International Nuclear Information System (INIS)

    Warhus, J.; Castleton, R.; Lanning, S.

    1981-12-01

    Testing and quality assurance of large numbers of firing systems are an essential part of the development of the Tactical Airfield Attack Munition (TAAM). A computerized test and data acquisition system has been developed to make the testing and quality assurance workload manageable. The system hardware utilizes an LSI-11/23 computer, a Tektronix 7612 transient digitizer, and various other programmable instruments and power supplies. The system is capable of measuring and analyzing mechanical shock and fireset transient waveforms, automating testing sequences, and making records and comparisons of the test results. The system architecture is flexible for general purpose firing system development work

  9. A New Human-Machine Interfaces of Computer-based Procedure System to Reduce the Team Errors in Nuclear Power Plants

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Sa Kil; Sim, Joo Hyun; Lee, Hyun Chul [Korea Atomic Research Institute, Daejeon (Korea, Republic of)

    2016-10-15

    In this study, we identify the emerging types of team errors, especially, in digitalized control room of nuclear power plants such as the APR-1400 main control room of Korea. Most works in nuclear industry are to be performed by a team of more than two persons. Even though the individual errors can be detected and recovered by the qualified others and/or the well trained team, it is rather seldom that the errors by team could be easily detected and properly recovered by the team itself. Note that the team is defined as two or more people who are appropriately interacting with each other, and the team is a dependent aggregate, which accomplishes a valuable goal. Organizational errors sometimes increase the likelihood of operator errors through the active failure pathway and, at the same time, enhance the possibility of adverse outcomes through defensive weaknesses. We incorporate the crew resource management as a representative approach to deal with the team factors of the human errors. We suggest a set of crew resource management training procedures under the unsafe environments where human errors can have devastating effects. We are on the way to develop alternative interfaces against team error in a condition of using a computer-based procedure system in a digitalized main control room. The computer-based procedure system is a representative feature of digitalized control room. In this study, we will propose new interfaces of computer-based procedure system to reduce feasible team errors. We are on the way of effectiveness test to validate whether the new interface can reduce team errors during operating with a computer-based procedure system in a digitalized control room.

  10. A New Human-Machine Interfaces of Computer-based Procedure System to Reduce the Team Errors in Nuclear Power Plants

    International Nuclear Information System (INIS)

    Kim, Sa Kil; Sim, Joo Hyun; Lee, Hyun Chul

    2016-01-01

    In this study, we identify the emerging types of team errors, especially, in digitalized control room of nuclear power plants such as the APR-1400 main control room of Korea. Most works in nuclear industry are to be performed by a team of more than two persons. Even though the individual errors can be detected and recovered by the qualified others and/or the well trained team, it is rather seldom that the errors by team could be easily detected and properly recovered by the team itself. Note that the team is defined as two or more people who are appropriately interacting with each other, and the team is a dependent aggregate, which accomplishes a valuable goal. Organizational errors sometimes increase the likelihood of operator errors through the active failure pathway and, at the same time, enhance the possibility of adverse outcomes through defensive weaknesses. We incorporate the crew resource management as a representative approach to deal with the team factors of the human errors. We suggest a set of crew resource management training procedures under the unsafe environments where human errors can have devastating effects. We are on the way to develop alternative interfaces against team error in a condition of using a computer-based procedure system in a digitalized main control room. The computer-based procedure system is a representative feature of digitalized control room. In this study, we will propose new interfaces of computer-based procedure system to reduce feasible team errors. We are on the way of effectiveness test to validate whether the new interface can reduce team errors during operating with a computer-based procedure system in a digitalized control room

  11. A new computer-based counselling system for the promotion of physical activity in patients with chronic diseases--results from a pilot study.

    Science.gov (United States)

    Becker, Annette; Herzberg, Dominikus; Marsden, Nicola; Thomanek, Sabine; Jung, Hartmut; Leonhardt, Corinna

    2011-05-01

    To develop a computer-based counselling system (CBCS) for the improvement of attitudes towards physical activity in chronically ill patients and to pilot its efficacy and acceptance in primary care. The system is tailored to patients' disease and motivational stage. During a pilot study in five German general practices, patients answered questions before, directly and 6 weeks after using the CBCS. Outcome criteria were attitudes and self-efficacy. Qualitative interviews were performed to identify acceptance indicators. Seventy-nine patients participated (mean age: 64.5 years, 53% males; 38% without previous computer experience). Patients' affective and cognitive attitudes changed significantly, self-efficacy showed only minor changes. Patients mentioned no difficulties in interacting with the CBCS. However, perception of the system's usefulness was inconsistent. Computer-based counselling for physical activity related attitudes in patients with chronic diseases is feasible, but the circumstances of use with respect to the target group and its integration into the management process have to be clarified in future studies. This study adds to the understanding of computer-based counselling in primary health care. Acceptance indicators identified in this study will be validated as part of a questionnaire on technology acceptability in a subsequent study. Copyright © 2010 Elsevier Ireland Ltd. All rights reserved.

  12. [Personal computer-based computer monitoring system of the anesthesiologist (2-year experience in development and use)].

    Science.gov (United States)

    Buniatian, A A; Sablin, I N; Flerov, E V; Mierbekov, E M; Broĭtman, O G; Shevchenko, V V; Shitikov, I I

    1995-01-01

    Creation of computer monitoring systems (CMS) for operating rooms is one of the most important spheres of personal computer employment in anesthesiology. The authors developed a PC RS/AT-based CMS and effectively used it for more than 2 years. This system permits comprehensive monitoring in cardiosurgical operations by real time processing the values of arterial and central venous pressure, pressure in the pulmonary artery, bioelectrical activity of the brain, and two temperature values. Use of this CMS helped appreciably improve patients' safety during surgery. The possibility to assess brain function by computer monitoring the EEF simultaneously with central hemodynamics and body temperature permit the anesthesiologist to objectively assess the depth of anesthesia and to diagnose cerebral hypoxia. Automated anesthesiological chart issued by the CMS after surgery reliably reflects the patient's status and the measures taken by the anesthesiologist.

  13. Computer-Based Image Analysis for Plus Disease Diagnosis in Retinopathy of Prematurity: Performance of the "i-ROP" System and Image Features Associated With Expert Diagnosis.

    Science.gov (United States)

    Ataer-Cansizoglu, Esra; Bolon-Canedo, Veronica; Campbell, J Peter; Bozkurt, Alican; Erdogmus, Deniz; Kalpathy-Cramer, Jayashree; Patel, Samir; Jonas, Karyn; Chan, R V Paul; Ostmo, Susan; Chiang, Michael F

    2015-11-01

    We developed and evaluated the performance of a novel computer-based image analysis system for grading plus disease in retinopathy of prematurity (ROP), and identified the image features, shapes, and sizes that best correlate with expert diagnosis. A dataset of 77 wide-angle retinal images from infants screened for ROP was collected. A reference standard diagnosis was determined for each image by combining image grading from 3 experts with the clinical diagnosis from ophthalmoscopic examination. Manually segmented images were cropped into a range of shapes and sizes, and a computer algorithm was developed to extract tortuosity and dilation features from arteries and veins. Each feature was fed into our system to identify the set of characteristics that yielded the highest-performing system compared to the reference standard, which we refer to as the "i-ROP" system. Among the tested crop shapes, sizes, and measured features, point-based measurements of arterial and venous tortuosity (combined), and a large circular cropped image (with radius 6 times the disc diameter), provided the highest diagnostic accuracy. The i-ROP system achieved 95% accuracy for classifying preplus and plus disease compared to the reference standard. This was comparable to the performance of the 3 individual experts (96%, 94%, 92%), and significantly higher than the mean performance of 31 nonexperts (81%). This comprehensive analysis of computer-based plus disease suggests that it may be feasible to develop a fully-automated system based on wide-angle retinal images that performs comparably to expert graders at three-level plus disease discrimination. Computer-based image analysis, using objective and quantitative retinal vascular features, has potential to complement clinical ROP diagnosis by ophthalmologists.

  14. Perceptions of a computer-based instruction system in special education: high school teachers and students views.

    Science.gov (United States)

    Chiang, Hsin-Yu Ariel; Jacobs, Karen

    2010-01-01

    Researchers investigated how one type of computer-based instruction (CBI)--Kurzweil 3000 (K-3000), was perceived to affect the reading, functional task performance, and academic self-perception of high school students with special needs. 16 students with special needs used K-3000 (assistive software that provides students with reading support) for six months to read assignments for their English language arts class and six teachers who had previous experience with integrating K-3000 into their classes were recruited. Data from focus group interviews of students and teachers were used. The advantages and disadvantages of K-3000, the factors that affected teachers' use of CBI and users' progress were explored. After the regular use of K-3000, students and teachers reported improvement in the amount and speed of reading and increased academic self-perception, specifically related to reading comprehension and pronunciation. Teachers reported that lack of accessibility to technology, time constraints, and difficulties with class management were the major reasons that hindered CBI use in their classrooms. Student participants noted that CBI was helpful when they were engaged in functional activities related to reading and writing. The progress of students in self-perception, and the advantages and drawbacks of the K-3000, along with the mechanism of users' progression were described and discussed.

  15. Critical care nurse practitioners and clinical nurse specialists interface patterns with computer-based decision support systems.

    Science.gov (United States)

    Weber, Scott

    2007-11-01

    The purposes of this review are to examine the types of clinical decision support systems in use and to identify patterns of how critical care advanced practice nurses (APNs) have integrated these systems into their nursing care patient management practices. The decision-making process itself is analyzed with a focus on how automated systems attempt to capture and reflect human decisional processes in critical care nursing, including how systems actually organize and process information to create outcome estimations based on patient clinical indicators and prognosis logarithms. Characteristics of APN clinicians and implications of these characteristics on decision system use, based on the body of decision system user research, are introduced. A review of the Medline, Ovid, CINAHL, and PubMed literature databases was conducted using "clinical decision support systems,"computerized clinical decision making," and "APNs"; an examination of components of several major clinical decision systems was also undertaken. Use patterns among APNs and other clinicians appear to vary; there is a need for original research to examine how APNs actually use these systems in their practices in critical care settings. Because APNs are increasingly responsible for admission to, and transfer from, critical care settings, more understanding is needed on how they interact with this technology and how they see automated decision systems impacting their practices. APNs who practice in critical care settings vary significantly in how they use the clinical decision systems that are in operation in their practice settings. These APNs must have an understanding of their use patterns with these systems and should critically assess whether their patient care decision making is affected by the technology.

  16. Operational experiences on the Borssele nuclear power plant using computer based surveillance and diagnostic system on-line

    International Nuclear Information System (INIS)

    Turkcan, E.; Quaadvliet, W.H.J.; Peeters, T.T.J.M.; Verhoef, J.P

    1991-06-01

    The on-line monitoring and diagnostics system of Borssele nuclear power plant (NPP), designed and established by the ECN Energy Research Foundation, has been operating continuously since 1983. The system is extended in form of multiprocessing, multi-tasking structure performing real-time monitoring, on-line reactor parameters' calculation, data-base preparation for expert systems and providing early information on possible malfunctions even in the incipient stage making alert by passive alarms. The system realized has already been operating in the course of 7 fuel cycles of the reactor starting from start-up through normal power operation. An expert system operating on the VAX work station is added to the surveillance and diagnostics system for data base management of the observed physical parameters relevant to the NPP under supervision. The paper highlights the surveillance and diagnostic modules involved, in their actual hierarchical form in use, presents theoretical considerations applied to the design of the surveillance system together with the results obtained through the 12th to 17th fuel cycles of the NPP including start-ups and shut-downs and reveals the experience thus gained by both utility and ECN through the application of the system described. (author). 19 refs.; 4 figs

  17. Development of a personal computer-based state system of accounting for/and control of nuclear materials

    International Nuclear Information System (INIS)

    Markov, A.

    1986-09-01

    An IBM-PC and compatible based state system of accounting for and control of nuclear materials under international safeguards (state-level SSAC) is presented. The system works under DOS version 2.0 and above. It consists of a single-module Safeguards Report Editor which is a multi-function menu-driven code written in BASIC. The Editor may be run both in interactive mode and as an EXEC module. The output represents four types of material accounting reports on diskette, suitable for direct input into the IAEA Safeguards Information System (ISIS). In the first part of the report presented, a general description of the system is given. This is complemented with a detailed User Manual where a Guide to Applications, an Operator's Guide, a Programmer's Guide and Listings are included. The system is now available. It is maintained by the Bulgarian Committee on the Uses of Atomic Energy for Peaceful Purposes

  18. Models and methods for design and implementation of computer based control and monitoring systems for production cells

    DEFF Research Database (Denmark)

    Lynggaard, Hans Jørgen Birk

    This dissertation is concerned with the engineering, i.e. the designing and making, of industrial cell control systems. The focus is on automated robot welding cells in the shipbuilding industry. The industrial research project defines models and methods for design and implementation of computer...... through the implementation of two cell control systems for robot welding cells in production at Odense Steel Shipyard.It is concluded that cell control technology provides for increased performance in production systems, and that the Cell Control Engineering concept reduces the effort for providing high...... quality and high functionality cell control solutions for the industry....

  19. Computer-based system for inspection of water chemistry regimes in WWER-type nuclear power plants

    International Nuclear Information System (INIS)

    Burcl, R.; Novak, M.; Malenka, P.

    1993-01-01

    The unsatisfactory situation in water chemistry testing at nuclear power plants with WWER type reactors is described. The testing primarily relies on laboratory analyses of manually taken samples. About 40 samples from one unit are tested per shift, which comprises approximately 250 determinations of various parameters. The time between two determinations is no shorter than 4 to 6 hours, thus rapid parameter changes between two determinations fail to be monitored. A novel system of automated chemistry monitoring is outlined, feasible for WWER type reactors. The system comprises 10 sets of sensors for monitoring all the relevant chemistry parameters of both the primary and secondary coolant circuits. Each sensor set has its own autonomous computer which secures its function even in case of loss of the chemical information network. The entire system is controlled by a master computer which also collects the results and provides contact with the power plant's information system. (Z.S.). 1 fig

  20. SABRE: a computer-based system for the assessment of body radioactivity by photon spectrometry. Part 4

    International Nuclear Information System (INIS)

    Venn, J.B.

    1982-02-01

    A PDP-11/10 computer system is described for the acquisition and processing of pulse height spectra from detectors used for the measurement of body radioactivity. Version 4 of SABRE (System for the Assessment of Body Radioactivity) provides control of multiple detection systems from visual display consoles by means of a command language. A wide range of facilities is available for the display, processing and storage of acquired spectra and complex operations may be pre-programmed by means of the SABRE MACRO language. The hardware includes a CAMAC interface to the detection systems, disc cartridge drives for mass storage of data and programs, and data-links to other computers. The software is written in assembler language and includes special features for the dynamic allocation of computer memory and for safeguarding acquired data. (author)

  1. Design and verification of computer-based reactor control system modification at Bruce-A candu nuclear generating station

    International Nuclear Information System (INIS)

    Basu, S.; Webb, N.

    1995-01-01

    The Reactor Control System at Bruce-A Nuclear Generating Station is going through some design modifications, which involve a rigorous design process including independent verification and validation. The design modification includes changes to the control logic, alarms and annunciation, hardware and software. The design (and verification) process includes design plan, design requirements, hardware and software specifications, hardware and software design, testing, technical review, safety evaluation, reliability analysis, failure mode and effect analysis, environmental qualification, seismic qualification, software quality assurance, system validation, documentation update, configuration management, and final acceptance. (7 figs.)

  2. Evolution of computer-based surveillance, control and man-machine communication systems in nuclear power stations

    International Nuclear Information System (INIS)

    Wilkinson, H.M.

    1980-01-01

    Reactor surveillance systems, man-machine communication, control methods and system relibility have steadily improved with successive designs. These improvements have been dramatic. Operational results from nine power-reactor units and preliminary results from 12 more units in various phases of implementation are now becoming available. The scope of the improvements ranges from the first design which used only lantern type displays to the latest which uses 18 colour cathode ray tubes (CRT). The operator can bnow scan a parallel presentation of annunciator messages, bar charts and graphical presentations. (orig./HP)

  3. HuRECA: Human Reliability Evaluator for Computer-based Control Room Actions

    International Nuclear Information System (INIS)

    Kim, Jae Whan; Lee, Seung Jun; Jang, Seung Cheol

    2011-01-01

    As computer-based design features such as computer-based procedures (CBP), soft controls (SCs), and integrated information systems are being adopted in main control rooms (MCR) of nuclear power plants, a human reliability analysis (HRA) method capable of dealing with the effects of these design features on human reliability is needed. From the observations of human factors engineering verification and validation experiments, we have drawn some major important characteristics on operator behaviors and design-related influencing factors (DIFs) from the perspective of human reliability. Firstly, there are new DIFs that should be considered in developing an HRA method for computer-based control rooms including especially CBP and SCs. In the case of the computer-based procedure rather than the paper-based procedure, the structural and managerial elements should be considered as important PSFs in addition to the procedural contents. In the case of the soft controllers, the so-called interface management tasks (or secondary tasks) should be reflected in the assessment of human error probability. Secondly, computer-based control rooms can provide more effective error recovery features than conventional control rooms. Major error recovery features for computer-based control rooms include the automatic logic checking function of the computer-based procedure and the information sharing feature of the general computer-based designs

  4. The Journey of a Sandwich: Computer-Based Laboratory Experiments about the Human Digestive System in High School Biology Teaching

    Science.gov (United States)

    Sorgo, Andrej; Hajdinjak, Zdravka; Briski, Darko

    2008-01-01

    Teaching high school students about the digestive system can be a challenge for a teacher when s/he wants to overcome rote learning of facts without a deeper understanding of the physiological processes inside the alimentary tract. A series of model experiments illustrating the journey of a sandwich was introduced into teaching high school…

  5. Attack Methodology Analysis: Emerging Trends in Computer-Based Attack Methodologies and Their Applicability to Control System Networks

    Energy Technology Data Exchange (ETDEWEB)

    Bri Rolston

    2005-06-01

    Threat characterization is a key component in evaluating the threat faced by control systems. Without a thorough understanding of the threat faced by critical infrastructure networks, adequate resources cannot be allocated or directed effectively to the defense of these systems. Traditional methods of threat analysis focus on identifying the capabilities and motivations of a specific attacker, assessing the value the adversary would place on targeted systems, and deploying defenses according to the threat posed by the potential adversary. Too many effective exploits and tools exist and are easily accessible to anyone with access to an Internet connection, minimal technical skills, and a significantly reduced motivational threshold to be able to narrow the field of potential adversaries effectively. Understanding how hackers evaluate new IT security research and incorporate significant new ideas into their own tools provides a means of anticipating how IT systems are most likely to be attacked in the future. This research, Attack Methodology Analysis (AMA), could supply pertinent information on how to detect and stop new types of attacks. Since the exploit methodologies and attack vectors developed in the general Information Technology (IT) arena can be converted for use against control system environments, assessing areas in which cutting edge exploit development and remediation techniques are occurring can provide significance intelligence for control system network exploitation, defense, and a means of assessing threat without identifying specific capabilities of individual opponents. Attack Methodology Analysis begins with the study of what exploit technology and attack methodologies are being developed in the Information Technology (IT) security research community within the black and white hat community. Once a solid understanding of the cutting edge security research is established, emerging trends in attack methodology can be identified and the gap between

  6. Exploring the use of tablet computer-based electronic data capture system to assess patient reported measures among patients with chronic kidney disease: a pilot study.

    Science.gov (United States)

    Wong, Dorothy; Cao, Shen; Ford, Heather; Richardson, Candice; Belenko, Dmitri; Tang, Evan; Ugenti, Luca; Warsmann, Eleanor; Sissons, Amanda; Kulandaivelu, Yalinie; Edwards, Nathaniel; Novak, Marta; Li, Madeline; Mucsi, Istvan

    2017-12-06

    Collecting patient reported outcome measures (PROMs) via computer-based electronic data capture system may improve feasibility and facilitate implementation in clinical care. We report our initial experience about the acceptability of touch-screen tablet computer-based, self-administered questionnaires among patients with chronic kidney disease (CKD), including stage 5 CKD treated with renal replacement therapies (RRT) (either dialysis or transplant). We enrolled a convenience sample of patients with stage 4 and 5 CKD (including patients on dialysis or after kidney transplant) in a single-centre, cross-sectional pilot study. Participants completed validated questionnaires programmed on an electronic data capture system (DADOS, Techna Inc., Toronto) on tablet computers. The primary objective was to evaluate the acceptability and feasibility of using tablet-based electronic data capture in patients with CKD. Descriptive statistics, Fischer's exact test and multivariable logistic regression models were used for data analysis. One hundred and twenty one patients (55% male, mean age (± SD) of 58 (±14) years, 49% Caucasian) participated in the study. Ninety-two percent of the respondents indicated that the computer tablet was acceptable and 79% of the participants required no or minimal help for completing the questionnaires. Acceptance of tablets was lower among patients 70 years or older (75% vs. 95%; p = 0.011) and with little previous computer experience (81% vs. 96%; p = 0.05). Furthermore, a greater level of assistance was more frequently required by patients who were older (45% vs. 15%; p = 0.009), had lower level of education (33% vs. 14%; p = 0.027), low health literacy (79% vs. 12%; p = 0.027), and little previous experience with computers (52% vs. 10%; p = 0.027). Tablet computer-based electronic data capture to administer PROMs was acceptable and feasible for most respondents and could therefore be used to systematically assess PROMs

  7. Environmental tests of a digital safety channel: An investigation of stress-related vulnerabilities of computer-based safety system

    International Nuclear Information System (INIS)

    Korsah, K.; Wilson, T.L.; Wood, R.; Tanaka, T.

    1997-01-01

    This article presents the results of environmental stress tests performed on an experimental digital safety channel (EDSC) assembled at the Oak Ridge National Laboratory as part of the Qualification of Advanced Instrumentation and Controls Systems Research program, which was sponsored by the US Nuclear Regulatory Commission. The program is expected to provide recommendations for environmental qualification of digital safety systems. The purpose of the study was to investigate potential vulnerabilities of distributed computer systems used in safety applications when subjected to environmental stressors. The EDSC assembled for the tests employs technologies and digital subsystems representative of those proposed for use in advanced light-water reactors or as retrofits in existing plants. Subsystems include computers, electrical and optical serial communication links, fiber-optic network links, analog-to-digital and digital-to-analog converters, and multiplexers. The EDSC was subjected to selected stressors that are a potential risk to digital equipment in a mild environment. The selected stressors were electromagnetic and radiofrequency interferences (EMI-RFI), temperature, humidity, and smoke exposure. The stressors were applied at levels of intensity considerably higher than the safety channel is likely to experience in a normal nuclear power plant environment. Ranges of stress were selected at a sufficiently high level to induce errors so that failure modes that are characteristic of the technologies employed could be identified. On the basis of the incidence of functional errors observed during testing, EMI-RFI, smoke exposure, and high temperature coupled with high relative humidity, in that order, were found to have the greatest impact of the stressors investigated. The most prevalent stressor-induced upsets, as well as the most severe, were found to occur during the EMI-RFI tests

  8. An approach to the verification of a fault-tolerant, computer-based reactor safety system: A case study using automated reasoning: Volume 1: Interim report

    International Nuclear Information System (INIS)

    Chisholm, G.H.; Kljaich, J.; Smith, B.T.; Wojcik, A.S.

    1987-01-01

    The purpose of this project is to explore the feasibility of automating the verification process for computer systems. The intent is to demonstrate that both the software and hardware that comprise the system meet specified availability and reliability criteria, that is, total design analysis. The approach to automation is based upon the use of Automated Reasoning Software developed at Argonne National Laboratory. This approach is herein referred to as formal analysis and is based on previous work on the formal verification of digital hardware designs. Formal analysis represents a rigorous evaluation which is appropriate for system acceptance in critical applications, such as a Reactor Safety System (RSS). This report describes a formal analysis technique in the context of a case study, that is, demonstrates the feasibility of applying formal analysis via application. The case study described is based on the Reactor Safety System (RSS) for the Experimental Breeder Reactor-II (EBR-II). This is a system where high reliability and availability are tantamount to safety. The conceptual design for this case study incorporates a Fault-Tolerant Processor (FTP) for the computer environment. An FTP is a computer which has the ability to produce correct results even in the presence of any single fault. This technology was selected as it provides a computer-based equivalent to the traditional analog based RSSs. This provides a more conservative design constraint than that imposed by the IEEE Standard, Criteria For Protection Systems For Nuclear Power Generating Stations (ANSI N42.7-1972)

  9. Human-machine interface aspects and use of computer-based operator support systems in control room upgrades and new control room designs for nuclear power plants

    International Nuclear Information System (INIS)

    Berg, O.

    1997-01-01

    At the Halden Project efforts are made to explore the possibilities through design, development and validation of Computer-based Operator Support Systems (COSSes) which can assist the operators in different operational situations, ranging from normal operation to disturbance and accident conditions. The programme comprises four main activities: 1) verification and validation of safety critical software systems; 2) man-machine interaction research emphasizing improvements in man-machine interfaces on the basis of human factors studies; 3) computerized operator support systems assisting the operator in fault detection/diagnosis and planning of control actions; and 4) control room development providing a basis for retrofitting of existing control rooms and for the design of advanced concepts. The paper presents the status of this development programme, including descriptions of specific operator support functions implemented in the simulator-based, experimental control room at Halden (HAMMLAB, HAlden Man-Machine LABoratory). These operator aids comprise advanced alarms systems, diagnostic support functions, electronic procedures, critical safety functions surveillance and accident management support systems. The different operator support systems development at the Halden Project are tested and evaluated in HAMMLAB with operators from the Halden Reactor, and occasionally from commercial NPPs, as test subjects. These evaluations provide data on the merits of different operator support systems in an advanced control room setting, as well as on how such systems should be integrated to enhance operator performance. The paper discusses these aspects and the role of computerized operator support systems in plant operation based on the experience from this work at the Halden Project. 15 refs, 5 figs

  10. Human-machine interface aspects and use of computer-based operator support systems in control room upgrades and new control room designs for nuclear power plants

    Energy Technology Data Exchange (ETDEWEB)

    Berg, O [Institutt for Energiteknikk, OECD Halden Reactor Project (Netherlands)

    1997-07-01

    At the Halden Project efforts are made to explore the possibilities through design, development and validation of Computer-based Operator Support Systems (COSSes) which can assist the operators in different operational situations, ranging from normal operation to disturbance and accident conditions. The programme comprises four main activities: 1) verification and validation of safety critical software systems; 2) man-machine interaction research emphasizing improvements in man-machine interfaces on the basis of human factors studies; 3) computerized operator support systems assisting the operator in fault detection/diagnosis and planning of control actions; and 4) control room development providing a basis for retrofitting of existing control rooms and for the design of advanced concepts. The paper presents the status of this development programme, including descriptions of specific operator support functions implemented in the simulator-based, experimental control room at Halden (HAMMLAB, HAlden Man-Machine LABoratory). These operator aids comprise advanced alarms systems, diagnostic support functions, electronic procedures, critical safety functions surveillance and accident management support systems. The different operator support systems development at the Halden Project are tested and evaluated in HAMMLAB with operators from the Halden Reactor, and occasionally from commercial NPPs, as test subjects. These evaluations provide data on the merits of different operator support systems in an advanced control room setting, as well as on how such systems should be integrated to enhance operator performance. The paper discusses these aspects and the role of computerized operator support systems in plant operation based on the experience from this work at the Halden Project. 15 refs, 5 figs.

  11. Considerations on Accounting Intelligent Systems Importance

    Directory of Open Access Journals (Sweden)

    2007-01-01

    Full Text Available Managers begin to realize the importance of artificial intelligence technologies for their organizations. Knowledge is today seen as the main organizational resource and that is what intelligent systems are about: manipulating knowledge. In this paper we highlight the main reasons that an accountant can bring to his managers to emphasize this idea: intelligent systems are really needful in modern accounting.

  12. Importance theory for lumped-parameter systems

    International Nuclear Information System (INIS)

    Cady, K.B.; Kenton, M.A.; Ward, J.C.; Piepho, M.G.

    1981-01-01

    A general sensitivity theory has been developed for nonlinear lumped parameter system simulations. The point of departure is general perturbation theory for nonlinear systems. Importance theory as developed here allows the calculation of the sensitivity of a response function to any physical or design parameter; importance of any equation or term or physical effect in the system model on the response function; variance of the response function caused by the variances and covariances of all physical parameters; and approximate effect on the response function of missing physical phenomena or incorrect parameters

  13. Critically Important Object Security System Element Model

    Directory of Open Access Journals (Sweden)

    I. V. Khomyackov

    2012-03-01

    Full Text Available A stochastic model of critically important object security system element has been developed. The model includes mathematical description of the security system element properties and external influences. The state evolution of the security system element is described by the semi-Markov process with finite states number, the semi-Markov matrix and the initial semi-Markov process states probabilities distribution. External influences are set with the intensity of the Poisson thread.

  14. The Effect Of Application Computer-Based Accounting Information System CBAIS On The Quality Of Accounting Information And Managerial Performance Of Sugar Industries In Indonesia

    Directory of Open Access Journals (Sweden)

    Asep Darmansyah

    2015-08-01

    Full Text Available The study aims to determine characteristics of Indonesian sugar industries as well as the influence of the implementation of computer-based accounting information system CBAIS to the quality of accounting information and managerial performance of the sugar industries of Indonesia. The research method was a survey with the research type was a descriptive and verificative. The research population were sugar industries in Indonesia. Data consists of primary and secondary data. Data were analyzed making use of linear regression. This study shows that the sugar millsindustries of Indonesia are mostly located in Java. Most of the sugar industries either in Java or outside Java are owned the central government in the form of state-owned enterprises and the rest is privately owned. Most of them making use of a business area with a mixed pattern between the right to cultivate and the right to build. Most of sugar industries gained canes in two ways namely planted by its company and bought from farmers. Then the first variable the application of CBAIS of sugar industries is still categorized sufficient which indicates the condition is not very bad or not very good. The others the quality of accounting information of sugar industries is good category and its managerial performance is also good. The three variables above have not shown the ideal category namely is very good category. The application of CBAIS significantly affects on the quality of accounting information and the accounting information quality significantly influences on managerial performance of sugar industries.

  15. Study on the import dues system

    Energy Technology Data Exchange (ETDEWEB)

    Woo, Sung Keun [LG-Caltex Oil Co., Seoul (Korea)

    2000-04-01

    Since October 1979, Korea had implemented a petroleum project fund dues system to actively prepare for unstable international petroleum condition. However, as the size of operating a petroleum project fund was bigger and the influence of government on this fund became powerful, it was inserted in the government tax revenues as a {sup S}pecial account for energy and resource project{sup i}n March 1994 and its name was changed to import dues. In this study, it discusses the facts of import dues system, which exists only in Korea, and its policy directions since this system has been reviewed due to the economic development, liberalization of petroleum industry and inequity between alternative energy sources. 4 tabs.

  16. Supporting plant operation through computer-based procedures

    International Nuclear Information System (INIS)

    Martinez, Victor; Medrano, Javier; Mendez, Julio

    2014-01-01

    Digital Systems are becoming more important in controlling and monitoring nuclear power plant operations. The capabilities of these systems provide additional functions as well as support operators in making decisions and avoiding errors. Regarding Operation Support Systems, an important way of taking advantage of these features is using computer-based procedures (CBPs) tools that enhance the plant operation. Integrating digital systems in analogue controls at nuclear power plants in operation becomes an extra challenge, in contrast to the integration of Digital Control Systems in new nuclear power plants. Considering the potential advantages of using this technology, Tecnatom has designed and developed a CBP platform taking currently operating nuclear power plants as its design basis. The result is a powerful tool which combines the advantages of CBPs and the conventional analogue control systems minimizing negative effects during plant operation and integrating operation aid-systems to support operators. (authors)

  17. Computer-based multi-channel analyzer based on internet

    International Nuclear Information System (INIS)

    Zhou Xinzhi; Ning Jiaoxian

    2001-01-01

    Combined the technology of Internet with computer-based multi-channel analyzer, a new kind of computer-based multi-channel analyzer system which is based on browser is presented. Its framework and principle as well as its implementation are discussed

  18. Computer based training: Technology and trends

    International Nuclear Information System (INIS)

    O'Neal, A.F.

    1986-01-01

    Computer Based Training (CBT) offers great potential for revolutionizing the training environment. Tremendous advances in computer cost performance, instructional design science, and authoring systems have combined to put CBT within the reach of all. The ability of today's CBT systems to implement powerful training strategies, simulate complex processes and systems, and individualize and control the training process make it certain that CBT will now, at long last, live up to its potential. This paper reviews the major technologies and trends involved and offers some suggestions for getting started in CBT

  19. The effects of computer-based mindfulness training on Self-control and Mindfulness within Ambulatorily assessed network Systems across Health-related domains in a healthy student population (SMASH): study protocol for a randomized controlled trial.

    Science.gov (United States)

    Rowland, Zarah; Wenzel, Mario; Kubiak, Thomas

    2016-12-01

    Self-control is an important ability in everyday life, showing associations with health-related outcomes. The aim of the Self-control and Mindfulness within Ambulatorily assessed network Systems across Health-related domains (SMASH) study is twofold: first, the effectiveness of a computer-based mindfulness training will be evaluated in a randomized controlled trial. Second, the SMASH study implements a novel network approach in order to investigate complex temporal interdependencies of self-control networks across several domains. The SMASH study is a two-armed, 6-week, non-blinded randomized controlled trial that combines seven weekly laboratory meetings and 40 days of electronic diary assessments with six prompts per day in a healthy undergraduate student population at the Johannes Gutenberg University Mainz, Germany. Participants will be randomly assigned to (1) receive a computer-based mindfulness intervention or (2) to a wait-list control condition. Primary outcomes are self-reported momentary mindfulness and self-control assessed via electronic diaries. Secondary outcomes are habitual mindfulness and habitual self-control. Further measures include self-reported behaviors in specific self-control domains: emotion regulation, alcohol consumption and eating behaviors. The effects of mindfulness training on primary and secondary outcomes are explored using three-level mixed models. Furthermore, networks will be computed with vector autoregressive mixed models to investigate the dynamics at participant and group level. This study was approved by the local ethics committee (reference code 2015_JGU_psychEK_011) and follows the standards laid down in the Declaration of Helsinki (2013). This randomized controlled trial combines an intensive Ambulatory Assessment of 40 consecutive days and seven laboratory meetings. By implementing a novel network approach, underlying processes of self-control within different health domains will be identified. These results will

  20. An exploration study to find important factors influencing on decision support systems

    Directory of Open Access Journals (Sweden)

    Naser Azad

    2013-09-01

    Full Text Available Decision Support Systems (DSSs are computer-based information systems for providing necessary supports for business or organizational decision-making activities. DSSs often serve the management, operations, and planning levels of all organizations and help to make decisions, which may be rapidly changing and not easily achieved in advance. This paper presents an empirical investigation to find important factors influencing DSSs. The proposed study designs a questionnaire in Likert scale consists of 36 questions, distributes it among 213 employees who work for different offices in municipality of Tehran, Iran. Cronbach alpha is calculated as 0.872. In addition, Kaiser-Meyer-Olkin Measure of Sampling Adequacy and Approx. Chi-Square are 0.782 and 1014.521, respectively. Based on the results of our survey, we have derived three factors including system, analysis and transaction.

  1. A 3-Month Randomized Controlled Pilot Trial of a Patient-Centered, Computer-Based Self-Monitoring System for the Care of Type 2 Diabetes Mellitus and Hypertension.

    Science.gov (United States)

    Or, Calvin; Tao, Da

    2016-04-01

    This study was performed to evaluate the effects of a patient-centered, tablet computer-based self-monitoring system for chronic disease care. A 3-month randomized controlled pilot trial was conducted to compare the use of a computer-based self-monitoring system in disease self-care (intervention group; n = 33) with a conventional self-monitoring method (control group; n = 30) in patients with type 2 diabetes mellitus and/or hypertension. The system was equipped with a 2-in-1 blood glucose and blood pressure monitor, a reminder feature, and video-based educational materials for the care of the two chronic diseases. The control patients were given only the 2-in-1 monitor for self-monitoring. The outcomes reported here included the glycated hemoglobin (HbA1c) level, fasting blood glucose level, systolic blood pressure, diastolic blood pressure, chronic disease knowledge, and frequency of self-monitoring. The data were collected at baseline and at 1-, 2-, and 3-month follow-up visits. The patients in the intervention group had a significant decrease in mean systolic blood pressure from baseline to 1 month (p computer-assisted and conventional disease self-monitoring appear to be useful to support/maintain blood pressure and diabetes control. The beneficial effects of the use of electronic self-care resources and support provided via mobile technologies require further confirmation in longer-term, larger trials.

  2. Computer based training for oil spill management

    International Nuclear Information System (INIS)

    Goodman, R.

    1993-01-01

    Large oil spills are infrequent occurrences, which poses a particular problem for training oil spill response staff and for maintaining a high level of response readiness. Conventional training methods involve table-top simulations to develop tactical and strategic response skills and boom-deployment exercises to maintain operational readiness. Both forms of training are quite effective, but they are very time-consuming to organize, are expensive to conduct, and tend to become repetitious. To provide a variety of response experiences, a computer-based system of oil spill response training has been developed which can supplement a table-top training program. Using a graphic interface, a realistic and challenging computerized oil spill response simulation has been produced. Integral to the system is a program editing tool which allows the teacher to develop a custom training exercise for the area of interest to the student. 1 ref

  3. Importance analysis for the systems with common cause failures

    International Nuclear Information System (INIS)

    Pan Zhijie; Nonaka, Yasuo

    1995-01-01

    This paper extends the importance analysis technique to the research field of common cause failures to evaluate the structure importance, probability importance, and β-importance for the systems with common cause failures. These importance measures would help reliability analysts to limit the common cause failure analysis framework and find efficient defence strategies against common cause failures

  4. All-optical reservoir computer based on saturation of absorption.

    Science.gov (United States)

    Dejonckheere, Antoine; Duport, François; Smerieri, Anteo; Fang, Li; Oudar, Jean-Louis; Haelterman, Marc; Massar, Serge

    2014-05-05

    Reservoir computing is a new bio-inspired computation paradigm. It exploits a dynamical system driven by a time-dependent input to carry out computation. For efficient information processing, only a few parameters of the reservoir needs to be tuned, which makes it a promising framework for hardware implementation. Recently, electronic, opto-electronic and all-optical experimental reservoir computers were reported. In those implementations, the nonlinear response of the reservoir is provided by active devices such as optoelectronic modulators or optical amplifiers. By contrast, we propose here the first reservoir computer based on a fully passive nonlinearity, namely the saturable absorption of a semiconductor mirror. Our experimental setup constitutes an important step towards the development of ultrafast low-consumption analog computers.

  5. A Study on the System Importance Analysis in SMART

    International Nuclear Information System (INIS)

    Kim, Kil Yoo; Kang, Dae Il; Kim, Tae Woon; Jin, Young Ho

    2011-01-01

    Importance analysis using RAW(Risk Achievement Worth) and RRW(Risk Reduction Worth) for the systems of SMART(System integrated Modular Advanced ReacTor) was performed. Usually PSA quantification software provide importance measures for basic events(BEs), and for components with receiving some users' input. However, generally, importance measures for systems are not automatically supplied by the software, but require the users' manual work. In this paper, the method how to get system importance measures is described using AIMS, and the characteristics of system importance measures in SMART are described

  6. Computer Based ex-ante Evaluation of the Planned Railway Line between Copenhagen and Ringsted by use of a Decision Support System named COSIMA-DSS

    DEFF Research Database (Denmark)

    Salling, Kim Bang; Landex, Alex

    2006-01-01

    This paper presents an appraisal study concerning the extension of the main railway line between Copenhagen and Ringsted by use of a software system named COSIMA-DSS. The modelling system is based upon a multi-methodological approach combining a cost-benefit analysis together with a multi......-criteria analysis. One of the key impacts in cost-benefit analyses is the time benefit which depends on the timetabling. The paper describes some of the challenges related to the calculation of the time benefits and how the time benefits can be implemented in the decision support system. At the end of the paper...

  7. Indirect adaptive soft computing based wavelet-embedded control paradigms for WT/PV/SOFC in a grid/charging station connected hybrid power system.

    Directory of Open Access Journals (Sweden)

    Sidra Mumtaz

    Full Text Available This paper focuses on the indirect adaptive tracking control of renewable energy sources in a grid-connected hybrid power system. The renewable energy systems have low efficiency and intermittent nature due to unpredictable meteorological conditions. The domestic load and the conventional charging stations behave in an uncertain manner. To operate the renewable energy sources efficiently for harvesting maximum power, instantaneous nonlinear dynamics should be captured online. A Chebyshev-wavelet embedded NeuroFuzzy indirect adaptive MPPT (maximum power point tracking control paradigm is proposed for variable speed wind turbine-permanent synchronous generator (VSWT-PMSG. A Hermite-wavelet incorporated NeuroFuzzy indirect adaptive MPPT control strategy for photovoltaic (PV system to extract maximum power and indirect adaptive tracking control scheme for Solid Oxide Fuel Cell (SOFC is developed. A comprehensive simulation test-bed for a grid-connected hybrid power system is developed in Matlab/Simulink. The robustness of the suggested indirect adaptive control paradigms are evaluated through simulation results in a grid-connected hybrid power system test-bed by comparison with conventional and intelligent control techniques. The simulation results validate the effectiveness of the proposed control paradigms.

  8. Indirect adaptive soft computing based wavelet-embedded control paradigms for WT/PV/SOFC in a grid/charging station connected hybrid power system.

    Science.gov (United States)

    Mumtaz, Sidra; Khan, Laiq; Ahmed, Saghir; Bader, Rabiah

    2017-01-01

    This paper focuses on the indirect adaptive tracking control of renewable energy sources in a grid-connected hybrid power system. The renewable energy systems have low efficiency and intermittent nature due to unpredictable meteorological conditions. The domestic load and the conventional charging stations behave in an uncertain manner. To operate the renewable energy sources efficiently for harvesting maximum power, instantaneous nonlinear dynamics should be captured online. A Chebyshev-wavelet embedded NeuroFuzzy indirect adaptive MPPT (maximum power point tracking) control paradigm is proposed for variable speed wind turbine-permanent synchronous generator (VSWT-PMSG). A Hermite-wavelet incorporated NeuroFuzzy indirect adaptive MPPT control strategy for photovoltaic (PV) system to extract maximum power and indirect adaptive tracking control scheme for Solid Oxide Fuel Cell (SOFC) is developed. A comprehensive simulation test-bed for a grid-connected hybrid power system is developed in Matlab/Simulink. The robustness of the suggested indirect adaptive control paradigms are evaluated through simulation results in a grid-connected hybrid power system test-bed by comparison with conventional and intelligent control techniques. The simulation results validate the effectiveness of the proposed control paradigms.

  9. Indirect adaptive soft computing based wavelet-embedded control paradigms for WT/PV/SOFC in a grid/charging station connected hybrid power system

    Science.gov (United States)

    Khan, Laiq; Ahmed, Saghir; Bader, Rabiah

    2017-01-01

    This paper focuses on the indirect adaptive tracking control of renewable energy sources in a grid-connected hybrid power system. The renewable energy systems have low efficiency and intermittent nature due to unpredictable meteorological conditions. The domestic load and the conventional charging stations behave in an uncertain manner. To operate the renewable energy sources efficiently for harvesting maximum power, instantaneous nonlinear dynamics should be captured online. A Chebyshev-wavelet embedded NeuroFuzzy indirect adaptive MPPT (maximum power point tracking) control paradigm is proposed for variable speed wind turbine-permanent synchronous generator (VSWT-PMSG). A Hermite-wavelet incorporated NeuroFuzzy indirect adaptive MPPT control strategy for photovoltaic (PV) system to extract maximum power and indirect adaptive tracking control scheme for Solid Oxide Fuel Cell (SOFC) is developed. A comprehensive simulation test-bed for a grid-connected hybrid power system is developed in Matlab/Simulink. The robustness of the suggested indirect adaptive control paradigms are evaluated through simulation results in a grid-connected hybrid power system test-bed by comparison with conventional and intelligent control techniques. The simulation results validate the effectiveness of the proposed control paradigms. PMID:28877191

  10. Computer-based communication in support of scientific and technical work. [conferences on management information systems used by scientists of NASA programs

    Science.gov (United States)

    Vallee, J.; Wilson, T.

    1976-01-01

    Results are reported of the first experiments for a computer conference management information system at the National Aeronautics and Space Administration. Between August 1975 and March 1976, two NASA projects with geographically separated participants (NASA scientists) used the PLANET computer conferencing system for portions of their work. The first project was a technology assessment of future transportation systems. The second project involved experiments with the Communication Technology Satellite. As part of this project, pre- and postlaunch operations were discussed in a computer conference. These conferences also provided the context for an analysis of the cost of computer conferencing. In particular, six cost components were identified: (1) terminal equipment, (2) communication with a network port, (3) network connection, (4) computer utilization, (5) data storage and (6) administrative overhead.

  11. Test of the Center for Automated Processing of Hardwoods' Auto-Image Detection and Computer-Based Grading and Cutup System

    Science.gov (United States)

    Philip A. Araman; Janice K. Wiedenbeck

    1995-01-01

    Automated lumber grading and yield optimization using computer controlled saws will be plausible for hardwoods if and when lumber scanning systems can reliably identify all defects by type. Existing computer programs could then be used to grade the lumber, identify the best cut-up solution, and control the sawing machines. The potential value of a scanning grading...

  12. Centralized computer-based controls of the Nova Laser Facility

    International Nuclear Information System (INIS)

    Krammen, J.

    1985-01-01

    This article introduces the overall architecture of the computer-based Nova Laser Control System and describes its basic components. Use of standard hardware and software components ensures that the system, while specialized and distributed throughout the facility, is adaptable. 9 references, 6 figures

  13. ISAT promises fail-safe computer-based reactor protection

    International Nuclear Information System (INIS)

    Anon.

    1989-01-01

    AEA Technology's ISAT system is a multiplexed microprocessor-based reactor protection system which has very extensive self-monitoring capabilities and is inherently fail safe. It provides a way of addressing software reliability problems that have tended to hamper widespread introduction of computer-based reactor protection. (author)

  14. Computer-based diagnostic decisionmaking.

    Science.gov (United States)

    Miller, R A

    1987-12-01

    The three decisionmaking aids described by the authors attack the generic problem of "see no evil, hear no evil, speak no evil"--improving the detection, diagnosis, and therapy of psychiatric disorders in the primary care setting. The three systems represent interventions at different steps in the process of providing appropriate care to psychiatric patients. The DSPW system of Robins and Marcus offers the potential of increasing the recognition of psychiatric disease in the physician's office. Politser's IDS program is representative of the sort of sophisticated microcomputer-based decisionmaking support tools that will become available to physicians in the not-too-distant future. Erdman's study of the impact of explanation capabilities on the acceptability of therapy recommending systems points out the need for careful scientific evaluations of features added to diagnostic and therapeutic systems.

  15. Computer-Based Career Interventions.

    Science.gov (United States)

    Mau, Wei-Cheng

    The possible utilities and limitations of computer-assisted career guidance systems (CACG) have been widely discussed although the effectiveness of CACG has not been systematically considered. This paper investigates the effectiveness of a theory-based CACG program, integrating Sequential Elimination and Expected Utility strategies. Three types of…

  16. Evaluation of a Computer-Based Recruitment System for Enrolling Men Who Have Sex With Men Into an Observational HIV Behavioral Risk Study.

    Science.gov (United States)

    Khosropour, Christine M; Dombrowksi, Julia C; Hughes, James P; Manhart, Lisa E; Golden, Matthew R

    2016-09-15

    Enrolling large numbers of high-risk men who have sex with men (MSM) into human immunodeficiency virus (HIV) prevention studies is necessary for research with an HIV outcome, but the resources required for in-person recruitment can be prohibitive. New methods with which to efficiently recruit large samples of MSM are needed. At a sexually transmitted disease clinic in Seattle, Washington, in 2013-2014, we used an existing clinical computer-assisted self-interview that collects patients' medical and sexual history data to recruit, screen, and enroll MSM into an HIV behavioral risk study and compared enrollees with men who declined to enroll. After completing the clinical computer-assisted self-interview, men aged ≥18 years who reported having had sex with men in the prior year were presented with an electronic study description and consent statement. We enrolled men at 2,661 (54%) of 4,944 visits, including 1,748 unique individuals. Enrolled men were younger (mean age = 34 years vs. 37 years; P partners (11 vs. 8; P use (15% vs. 8%; P < 0.001) than men who declined to enroll, but the HIV test positivity of the two groups was similar (1.9% vs. 2.0%; P = 0.80). Adapting an existing computerized clinic intake system, we recruited a large sample of MSM who may be an ideal population for an HIV prevention study. © The Author 2016. Published by Oxford University Press on behalf of the Johns Hopkins Bloomberg School of Public Health. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

  17. Computer-Based Cognitive Training in Aging.

    Science.gov (United States)

    Klimova, Blanka

    2016-01-01

    At present there is a rapid growth of aging population groups worldwide, which brings about serious economic and social problems. Thus, there is considerable effort to prolong the active life of these older people and keep them independent. The purpose of this mini review is to explore available clinical studies implementing computer-based cognitive training programs as intervention tools in the prevention and delay of cognitive decline in aging, with a special focus on their effectiveness. This was done by conducting a literature search in the databases Web of Science, Scopus, MEDLINE and Springer, and consequently by evaluating the findings of the relevant studies. The findings show that computerized cognitive training can lead to the improvement of cognitive functions such as working memory and reasoning skills in particular. However, this training should be performed over a longer time span since a short-term cognitive training mainly has an impact on short-term memory with temporary effects. In addition, the training must be intense to become effective. Furthermore, the results indicate that it is important to pay close attention to the methodological standards in future clinical studies.

  18. A COMPUTER BASED MAINTENANCE MANAGEMENT SYSTEM ...

    African Journals Online (AJOL)

    ... programs to schedule for maintenance or replacement of machines has been designed such that it enables the maintenance department control all jobs associated with plant maintenance and breakdown. It predicts the time to failure of designated plants and caters for the replacement analysis of some capital equipment.

  19. Cloud Computing Based E-Learning System

    Science.gov (United States)

    Al-Zoube, Mohammed; El-Seoud, Samir Abou; Wyne, Mudasser F.

    2010-01-01

    Cloud computing technologies although in their early stages, have managed to change the way applications are going to be developed and accessed. These technologies are aimed at running applications as services over the internet on a flexible infrastructure. Microsoft office applications, such as word processing, excel spreadsheet, access database…

  20. Imprecise system reliability and component importance based on survival signature

    International Nuclear Information System (INIS)

    Feng, Geng; Patelli, Edoardo; Beer, Michael; Coolen, Frank P.A.

    2016-01-01

    The concept of the survival signature has recently attracted increasing attention for performing reliability analysis on systems with multiple types of components. It opens a new pathway for a structured approach with high computational efficiency based on a complete probabilistic description of the system. In practical applications, however, some of the parameters of the system might not be defined completely due to limited data, which implies the need to take imprecisions of component specifications into account. This paper presents a methodology to include explicitly the imprecision, which leads to upper and lower bounds of the survival function of the system. In addition, the approach introduces novel and efficient component importance measures. By implementing relative importance index of each component without or with imprecision, the most critical component in the system can be identified depending on the service time of the system. Simulation method based on survival signature is introduced to deal with imprecision within components, which is precise and efficient. Numerical example is presented to show the applicability of the approach for systems. - Highlights: • Survival signature is a novel way for system reliability and component importance • High computational efficiency based on a complete description of system. • Include explicitly the imprecision, which leads to bounds of the survival function. • A novel relative importance index is proposed as importance measure. • Allows to identify critical components depending on the service time of the system.

  1. A complex network-based importance measure for mechatronics systems

    Science.gov (United States)

    Wang, Yanhui; Bi, Lifeng; Lin, Shuai; Li, Man; Shi, Hao

    2017-01-01

    In view of the negative impact of functional dependency, this paper attempts to provide an alternative importance measure called Improved-PageRank (IPR) for measuring the importance of components in mechatronics systems. IPR is a meaningful extension of the centrality measures in complex network, which considers usage reliability of components and functional dependency between components to increase importance measures usefulness. Our work makes two important contributions. First, this paper integrates the literature of mechatronic architecture and complex networks theory to define component network. Second, based on the notion of component network, a meaningful IPR is brought into the identifying of important components. In addition, the IPR component importance measures, and an algorithm to perform stochastic ordering of components due to the time-varying nature of usage reliability of components and functional dependency between components, are illustrated with a component network of bogie system that consists of 27 components.

  2. 78 FR 11090 - Steel Import Monitoring and Analysis System

    Science.gov (United States)

    2013-02-15

    ... tariffs on these steel imports and providing the steel industry time to restructure. The monitoring system... submissions were received from a coalition of eight steel trade groups (referred to as the ``industry''), a... that helps the industry to closely monitor steel imports. The comments are summarized below. The three...

  3. Expert evaluation in NPP safety important systems licensing process

    International Nuclear Information System (INIS)

    Mikhail, A Yastrebenetsky; Vasilchenko, V.N.

    2001-01-01

    Expert evaluation of nuclear power plant safety important systems modernization is an integral part of these systems licensing process. The paper contains some aspects of this evaluation which are based on Ukrainian experience of VVER-1000 and VVER-440 modernization. (authors)

  4. Expert evaluation in NPP safety important systems licensing process

    Energy Technology Data Exchange (ETDEWEB)

    Mikhail, A Yastrebenetsky; Vasilchenko, V.N. [Ukrainian State Scientific Technical Center of Nuclear and Radiation Safety (Ukraine)

    2001-07-01

    Expert evaluation of nuclear power plant safety important systems modernization is an integral part of these systems licensing process. The paper contains some aspects of this evaluation which are based on Ukrainian experience of VVER-1000 and VVER-440 modernization. (authors)

  5. Macro-Prudential Assessment of Colombian Financial Institutions’ Systemic Importance

    NARCIS (Netherlands)

    León, C.; Machado, C.; Murcia, A.

    2014-01-01

    Three metrics are designed to assess Colombian financial institutions’ size, connectedness and non-­substitutability as the main drivers of systemic importance: (i) centrality as net borrower in the money market network; (ii) centrality as payments originator in the large-value payment system

  6. Computer Based Training Authors' and Designers' training

    Directory of Open Access Journals (Sweden)

    Frédéric GODET

    2016-03-01

    Full Text Available This communication, through couple of studies driven since 10 years, tries to show how important is the training of authors in Computer Based Training (CBT. We submit here an approach to prepare designers mastering Interactive Multimedia modules in this domain. Which institutions are really dedicating their efforts in training authors and designers in this area of CBTs? Television devices and broadcast organisations offered since year 60s' a first support for Distance Learning. New media, New Information and Communication Technologies (NICT allowed several public and private organisations to start Distance Learning projects. As usual some of them met their training objectives, other of them failed. Did their really failed? Currently, nobody has the right answer. Today, we do not have enough efficient tools allowing us to evaluate trainees' acquisition in a short term view. Training evaluation needs more than 10 to 20 years of elapsed time to bring reliable measures. Nevertheless, given the high investments already done in this area, we cannot wait until the final results of the pedagogical evaluation. A lot of analyses showed relevant issues which can be used as directions for CBTs authors and designers training. Warning - Our studies and the derived conclusions are mainly based on projects driven in the field. We additionally bring our several years experience in the training of movie film authors in the design of interactive multimedia products. Some of our examples are extracting from vocational training projects where we were involved in all development phases from the analysis of needs to the evaluation of the acquisition within the trainee's / employee job's. Obviously, we cannot bring and exhaustive approach in this domain where a lot of parameters are involved as frame for the CBT interactive multimedia modules authors' and designers' training.

  7. A Computer-based 21st Century Prototype

    Directory of Open Access Journals (Sweden)

    Pannathon Sangarun

    2015-01-01

    Full Text Available Abstract This paper describes a prototype computer-based reading comprehension program. It begins with a short description, at a general level, of theoretical issues relating to the learning of comprehension skills in a foreign/second language learning. These issues cover such areas as personal meaning-making on the basis of individual differences and the need for individualized intervention to maximize the comprehension process. Modern technology facilitates this process and enables simultaneous support of large numbers of students. Specifically, from a learning perspective, the program focuses on students’ personal understandings while, from a reading perspective, the construction of meaning is based on an interactive model where both high-level (global, inferential structures are elicited/studied as well as low-level structures (e.g. vocabulary, grammar. These principles are strengthened with research findings from studies in awareness and language processing based on eye-movement analysis. As part of its reading comprehensions focus, the system also has a strong commitment to the development of critical thinking skills, recognized as one of the most important 21st Century skills. The program is then described in detail, including its ability to store students’ responses and to be administered through standard learning management systems. Finally, an outline of planned future developments and enhancements is presented.

  8. A 12-week pilot study of acceptance of a computer-based chronic disease self-monitoring system among patients with type 2 diabetes mellitus and/or hypertension.

    Science.gov (United States)

    Yan, Mian; Or, Calvin

    2017-08-01

    This study tested a structural model examining the effects of perceived usefulness, perceived ease of use, attitude, subjective norm, perceived behavioral control, health consciousness, and application-specific self-efficacy on the acceptance (i.e. behavioral intention and actual usage) of a computer-based chronic disease self-monitoring system among patients with type 2 diabetes mellitus and/or hypertension. The model was tested using partial least squares structural equation modeling, with 119 observations that were obtained by pooling data across three time points over a 12-week period. The results indicate that all of the seven constructs examined had a significant total effect on behavioral intention and explained 74 percent of the variance. Also, application-specific self-efficacy and behavioral intention had a significant total effect on actual usage and explained 17 percent of the variance. This study demonstrates that technology acceptance is determined by patient characteristics, technology attributes, and social influences. Applying the findings may increase the likelihood of acceptance.

  9. Importance of delayed neutron data in transmutation system

    International Nuclear Information System (INIS)

    Tsujimoto, Kazufumi

    1999-01-01

    The accelerator-driven transmutation system has been studied at the Japan Atomic Energy Research Institute. This system is a hybrid system which consists of a high intensity accelerator, a spallation target and a subcritical core region. The subcritical core is driven by neutrons generated by spallation reaction in the target region. There is no control rod in this system, so the power is controlled only by proton beam current. The beam current to keep constant power change with effective multiplication factor of subcritical core. So, the evaluation of delayed neutron fraction which is strongly connected to the measurement of subcritical level is important factor in operation of accelerator-driven system. In this paper, important nuclides for the delayed neutron fraction of ADS will be discussed, moreover, present state of delayed neutron data in evaluated nuclear data library is presented. (author)

  10. Computer-Based Learning in Chemistry Classes

    Science.gov (United States)

    Pietzner, Verena

    2014-01-01

    Currently not many people would doubt that computers play an essential role in both public and private life in many countries. However, somewhat surprisingly, evidence of computer use is difficult to find in German state schools although other countries have managed to implement computer-based teaching and learning in their schools. This paper…

  11. Computer-Based Testing: Test Site Security.

    Science.gov (United States)

    Rosen, Gerald A.

    Computer-based testing places great burdens on all involved parties to ensure test security. A task analysis of test site security might identify the areas of protecting the test, protecting the data, and protecting the environment as essential issues in test security. Protecting the test involves transmission of the examinations, identifying the…

  12. Computer-based feedback in formative assessment

    NARCIS (Netherlands)

    van der Kleij, Fabienne

    2013-01-01

    Formative assessment concerns any assessment that provides feedback that is intended to support learning and can be used by teachers and/or students. Computers could offer a solution to overcoming obstacles encountered in implementing formative assessment. For example, computer-based assessments

  13. Some important issues in evaluating the availability of passive systems

    International Nuclear Information System (INIS)

    Kafka, P.; Kelemen, I.; Krzykacz, B.

    1993-01-01

    In some countries new reactor concepts based on a broader use of passive safety features are under development. The term 'passive' as used here refers to systems which rely heavily on natural heat transfer process such as natural circulation to perform their function rather than on decidedly 'active' components like pumps. The paper deals with important issues in evaluating the availability of passive systems, e.g. the assessment of the active components, the assessment of passive components and structures and the probabilistic assessment of the physical function of the natural processes. Based on an outlined assessment process for the entire system and on an exercised simulation process for the assessment of passive components e.g. pipes insights and important issues are presented. A follow-up study will refine and expand the concept to a full scope assessment procedure of passive systems. (author)

  14. Importance for Municipalities of Infrastructure Information Systems in Turkey

    OpenAIRE

    Kamil KARATAS; Cemal BIYIK

    2017-01-01

    Technical infrastructures are the important development-level parameters of countries, difficult to maintain and require high-investment cost. It is required to take the advantage of information system for the better administration of technical infrastructure facilities, planning and taking effective decisions. Hence, infrastructure information systems must be built oriented to technical infrastructure (TI). In this study, Kunduracilar Street in Trabzon was selected as pilot area oriented to ...

  15. Monte Carlo importance sampling optimization for system reliability applications

    International Nuclear Information System (INIS)

    Campioni, Luca; Vestrucci, Paolo

    2004-01-01

    This paper focuses on the reliability analysis of multicomponent systems by the importance sampling technique, and, in particular, it tackles the optimization aspect. A methodology based on the minimization of the variance at the component level is proposed for the class of systems consisting of independent components. The claim is that, by means of such a methodology, the optimal biasing could be achieved without resorting to the typical approach by trials

  16. Use of digital computing devices in systems important to safety

    International Nuclear Information System (INIS)

    1986-01-01

    The incorporation of digital computing devices in systems important to safety now is progressing fast in several countries, including Canada, France, Federal Republic of Germany, Japan, USA. There are now reactors with microprocessors in some trip systems. The major functions of those systems are: reactor trip initiation, display, monitoring, testing, re-calibration of detectors. The benefits of moving to a fully computerized shut-down system should be improved reliability, greater flexibility, better man-machine interface, improved testing, higher reactor output and lower overall cost. With the introduction of computer devices in systems important to safety, plant availability and safety are improved because disturbances are treated before they lead to safety action, in this way helping the operator to avoid errors. The Meeting presentations were divided into sessions devoted to the following topics: Needs for the use of digital devices (DCD) in safety important systems (SIS) (5 papers); Problems raised by the integration SIS in the NPP control (7 papers); Description and presentation of DCD of SIS (6 papers); Results of experiences in engineering, manufacture, qualification operation of DCD hardware and software (5 papers). A separate abstract was prepared for each of these papers

  17. On importance assessment of aging multi-state system

    Science.gov (United States)

    Frenkel, Ilia; Khvatskin, Lev; Lisnianski, Anatoly

    2017-01-01

    Modern high-tech equipment requires precise temperature control and effective cooling below the ambient temperature. Greater cooling efficiencies will allow equipment to be operated for longer periods without overheating, providing a greater return on investment and increased in availability of the equipment. This paper presents application of the Lz-transform method to importance assessment of aging multi-state water-cooling system used in one of Israeli hospitals. The water cooling system consists of 3 principal sub-systems: chillers, heat exchanger and pumps. The performance of the system and the sub-systems is measured by their produced cooling capacity. Heat exchanger is an aging component. Straightforward Markov method applied to solve this problem will require building of a system model with numerous numbers of states and solving a corresponding system of multiple differential equations. Lz-transform method, which is used for calculation of the system elements importance, drastically simplified the solution. Numerical example is presented to illustrate the described approach.

  18. The importance of innovations for the development of franchising systems

    Directory of Open Access Journals (Sweden)

    Stanković Milica

    2013-01-01

    Full Text Available In today's global competitive business environment, innovations are crucial for the success of the company. It is necessary to emphasize the importance of understanding wishes and needs of consumers and an innovative manner in which their needs can be met more efficiently in comparison to competition. Franchising is, certainly, one of the business concepts that is difficult to associate with innovation, as it presents the use of a proven business model. At the global level, there is a constant tendency in the development of existing and new franchise systems. In this regard, the paper points out the importance of innovation for the development and improvement of the franchise systems. The phenomenon of open innovation is increasingly important in recent years. The paper highlights the importance of open innovation as the best way to innovate the franchising company's business through the adoption of ideas from the external environment and the exchange of internally created ideas. The model of open innovation involves the integration of customers, suppliers and franchisees in the new product development process. The open strategy of new product development is very important for franchising companies that want to be leaders. The paper reviews the development perspectives of open innovation in franchising systems in the future.

  19. Important issues for perioperative systemic antimicrobial prophylaxis in surgery

    NARCIS (Netherlands)

    Sinha, Bhanu; van Assen, Sander; Friedrich, Alexander W.

    PURPOSE OF REVIEW: Prevention of surgical site infections is a key issue to patient safety and the success of surgical interventions. Systemic antimicrobial prophylaxis is one important component of a perioperative infection prevention bundle. This review focuses on selected recent developments and

  20. Operational statistical analysis of the results of computer-based testing of students

    Directory of Open Access Journals (Sweden)

    Виктор Иванович Нардюжев

    2018-12-01

    Full Text Available The article is devoted to the issues of statistical analysis of results of computer-based testing for evaluation of educational achievements of students. The issues are relevant due to the fact that computerbased testing in Russian universities has become an important method for evaluation of educational achievements of students and quality of modern educational process. Usage of modern methods and programs for statistical analysis of results of computer-based testing and assessment of quality of developed tests is an actual problem for every university teacher. The article shows how the authors solve this problem using their own program “StatInfo”. For several years the program has been successfully applied in a credit system of education at such technological stages as loading computerbased testing protocols into a database, formation of queries, generation of reports, lists, and matrices of answers for statistical analysis of quality of test items. Methodology, experience and some results of its usage by university teachers are described in the article. Related topics of a test development, models, algorithms, technologies, and software for large scale computer-based testing has been discussed by the authors in their previous publications which are presented in the reference list.

  1. Computer based approach to fatigue analysis and design

    International Nuclear Information System (INIS)

    Comstock, T.R.; Bernard, T.; Nieb, J.

    1979-01-01

    An approach is presented which uses a mini-computer based system for data acquisition, analysis and graphic displays relative to fatigue life estimation and design. Procedures are developed for identifying an eliminating damaging events due to overall duty cycle, forced vibration and structural dynamic characteristics. Two case histories, weld failures in heavy vehicles and low cycle fan blade failures, are discussed to illustrate the overall approach. (orig.) 891 RW/orig. 892 RKD [de

  2. A quantum computer based on recombination processes in microelectronic devices

    International Nuclear Information System (INIS)

    Theodoropoulos, K; Ntalaperas, D; Petras, I; Konofaos, N

    2005-01-01

    In this paper a quantum computer based on the recombination processes happening in semiconductor devices is presented. A 'data element' and a 'computational element' are derived based on Schokley-Read-Hall statistics and they can later be used to manifest a simple and known quantum computing process. Such a paradigm is shown by the application of the proposed computer onto a well known physical system involving traps in semiconductor devices

  3. The importance of informatics systems for the sustainable development

    Directory of Open Access Journals (Sweden)

    Maria ANDRONIE

    2010-12-01

    Full Text Available One of the fields whose importance has been surging lately is the durable development, which is impossible to achieve unless humankind gives up gradually to the fossil energy sources and switches to the exploitation of the renewable energy sources.  This shift is mainly due to the fact that the traditional energy sources are limited, pricier and pricier and have a negative and irreversible effect upon the environment. In the durable development area, particularly the renewable energies, there are informatics systems used in a wide range of activities, from investments management and energy sources to the operation itself of their exploitation systems.  Such informatics systems may be integrated at a higher level, as the national weather forecast system or other specific systems.

  4. Manual on maintenance of systems and components important to safety

    International Nuclear Information System (INIS)

    1986-01-01

    The Manual should serve as guidance at the plant management level for the maintenance of systems and components important to safety. It includes a detailed description of management systems, administrative controls and procedures. The Annexes contain examples of documents and practices adopted by Operating Organizations of some Member States. It is not the intention of this Manual to address the technical problem of how to maintain a particular component but rather to cover the programmatic aspects of maintenance. It also contains some aspects of surveillance and verification activities. The Manual makes only general statements about radiation protection provisions in connection with maintenance; detailed guidance can be found in other IAEA documents

  5. Standardized computer-based organized reporting of EEG:SCORE

    DEFF Research Database (Denmark)

    Beniczky, Sandor; H, Aurlien,; JC, Brøgger,

    2013-01-01

    process, organized by the European Chapter of the International Federation of Clinical Neurophysiology. The Standardised Computer-based Organised Reporting of EEG (SCORE) software was constructed based on the terms and features of the consensus statement and it was tested in the clinical practice...... in free-text format. The purpose of our endeavor was to create a computer-based system for EEG assessment and reporting, where the physicians would construct the reports by choosing from predefined elements for each relevant EEG feature, as well as the clinical phenomena (for video-EEG recordings....... SCORE can potentially improve the quality of EEG assessment and reporting; it will help incorporate the results of computer-assisted analysis into the report, it will make possible the build-up of a multinational database, and it will help in training young neurophysiologists....

  6. An overview of computer-based natural language processing

    Science.gov (United States)

    Gevarter, W. B.

    1983-01-01

    Computer based Natural Language Processing (NLP) is the key to enabling humans and their computer based creations to interact with machines in natural language (like English, Japanese, German, etc., in contrast to formal computer languages). The doors that such an achievement can open have made this a major research area in Artificial Intelligence and Computational Linguistics. Commercial natural language interfaces to computers have recently entered the market and future looks bright for other applications as well. This report reviews the basic approaches to such systems, the techniques utilized, applications, the state of the art of the technology, issues and research requirements, the major participants and finally, future trends and expectations. It is anticipated that this report will prove useful to engineering and research managers, potential users, and others who will be affected by this field as it unfolds.

  7. Computer Based Test Untuk Seleksi Masuk Politeknik Negeri Bengkalis

    Directory of Open Access Journals (Sweden)

    Agus Tedyyana

    2017-11-01

    Full Text Available AbstrakPenyeleksian calon mahasiswa baru dapat dilakukan dengan aplikasi Computer Based Test (CBT. Metode yang digunakan meliputi teknik pengumpulan data, analisis sistem, model perancangan, implementasi dan pengujian. Penelitian ini menghasilkan aplikasi CBT dimana soal yang dimunculkan dari bank soal melalui proses pengacakan dengan tidak akan memunculkan soal yang sama dengan menggunakan metoda Fisher-Yates Shuffle. Dalam proses pengamanan informasi soal saat terhubung ke jaringan maka diperlukan teknik untuk penyandian pesan agar soal tersebut sebeum dimunculkan melewati proses enkripsi dan deskripsi data terlebih dahulu maka digunakan algoritma kriptografi  RSA. Metode perancangan perangkat lunak menggunakan model waterfall, perancangan database menggunakan entity relationship diagram, perancangan antarmuka menggunakan hypertext markup language (HTML Cascading Style Sheet (CSS dan jQuery serta diimplementasikan berbasis web dengan menggunakan bahasa pemrograman PHP dan database MySQL, Arsitektur jaringan yang digunakan aplikasi Computer Based Test adalah model jaringan client-server dengan jaringan Local Area Network (LAN. Kata kunci: Computer Based Test, Fisher-Yates Shuffle, Criptography, Local Area Network AbstractSelection of new student candidates can be done with Computer Based Test (CBT application. The methods used include data collection techniques, system analysis, design model, implementation and testing. This study produces a CBT application where the questions raised from the question bank through randomization process will not bring up the same problem using the Fisher-Yates Shuffle method. In the process of securing information about the problem when connected to the network it is necessary techniques for encoding the message so that the problem before appear through the process of encryption and description of data first then used RSA cryptography algorithm. Software design method using waterfall model, database design

  8. Design Of Computer Based Test Using The Unified Modeling Language

    Science.gov (United States)

    Tedyyana, Agus; Danuri; Lidyawati

    2017-12-01

    The Admission selection of Politeknik Negeri Bengkalis through interest and talent search (PMDK), Joint Selection of admission test for state Polytechnics (SB-UMPN) and Independent (UM-Polbeng) were conducted by using paper-based Test (PBT). Paper Based Test model has some weaknesses. They are wasting too much paper, the leaking of the questios to the public, and data manipulation of the test result. This reasearch was Aimed to create a Computer-based Test (CBT) models by using Unified Modeling Language (UML) the which consists of Use Case diagrams, Activity diagram and sequence diagrams. During the designing process of the application, it is important to pay attention on the process of giving the password for the test questions before they were shown through encryption and description process. RSA cryptography algorithm was used in this process. Then, the questions shown in the questions banks were randomized by using the Fisher-Yates Shuffle method. The network architecture used in Computer Based test application was a client-server network models and Local Area Network (LAN). The result of the design was the Computer Based Test application for admission to the selection of Politeknik Negeri Bengkalis.

  9. A review of computer-based simulators for ultrasound training.

    Science.gov (United States)

    Blum, Tobias; Rieger, Andreas; Navab, Nassir; Friess, Helmut; Martignoni, Marc

    2013-04-01

    Computer-based simulators for ultrasound training are a topic of recent interest. During the last 15 years, many different systems and methods have been proposed. This article provides an overview and classification of systems in this domain and a discussion of their advantages. Systems are classified and discussed according to the image simulation method, user interactions and medical applications. Computer simulation of ultrasound has one key advantage over traditional training. It enables novel training concepts, for example, through advanced visualization, case databases, and automatically generated feedback. Qualitative evaluations have mainly shown positive learning effects. However, few quantitative evaluations have been performed and long-term effects have to be examined.

  10. Importance for Municipalities of Infrastructure Information Systems in Turkey

    Directory of Open Access Journals (Sweden)

    Kamil KARATAS

    2017-08-01

    Full Text Available Technical infrastructures are the important development-level parameters of countries, difficult to maintain and require high-investment cost. It is required to take the advantage of information system for the better administration of technical infrastructure facilities, planning and taking effective decisions. Hence, infrastructure information systems must be built oriented to technical infrastructure (TI. In this study, Kunduracilar Street in Trabzon was selected as pilot area oriented to urban TI studies. Graphic and attribute information of the pilot area were collected. Every TI facility was arranged into the same coordinate system with different layers. Maps showing TI facilities in the pilot area and 3D view of the site were prepared on ArcGIS software.

  11. A Research Roadmap for Computation-Based Human Reliability Analysis

    Energy Technology Data Exchange (ETDEWEB)

    Boring, Ronald [Idaho National Lab. (INL), Idaho Falls, ID (United States); Mandelli, Diego [Idaho National Lab. (INL), Idaho Falls, ID (United States); Joe, Jeffrey [Idaho National Lab. (INL), Idaho Falls, ID (United States); Smith, Curtis [Idaho National Lab. (INL), Idaho Falls, ID (United States); Groth, Katrina [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2015-08-01

    The United States (U.S.) Department of Energy (DOE) is sponsoring research through the Light Water Reactor Sustainability (LWRS) program to extend the life of the currently operating fleet of commercial nuclear power plants. The Risk Informed Safety Margin Characterization (RISMC) research pathway within LWRS looks at ways to maintain and improve the safety margins of these plants. The RISMC pathway includes significant developments in the area of thermalhydraulics code modeling and the development of tools to facilitate dynamic probabilistic risk assessment (PRA). PRA is primarily concerned with the risk of hardware systems at the plant; yet, hardware reliability is often secondary in overall risk significance to human errors that can trigger or compound undesirable events at the plant. This report highlights ongoing efforts to develop a computation-based approach to human reliability analysis (HRA). This computation-based approach differs from existing static and dynamic HRA approaches in that it: (i) interfaces with a dynamic computation engine that includes a full scope plant model, and (ii) interfaces with a PRA software toolset. The computation-based HRA approach presented in this report is called the Human Unimodels for Nuclear Technology to Enhance Reliability (HUNTER) and incorporates in a hybrid fashion elements of existing HRA methods to interface with new computational tools developed under the RISMC pathway. The goal of this research effort is to model human performance more accurately than existing approaches, thereby minimizing modeling uncertainty found in current plant risk models.

  12. A Research Roadmap for Computation-Based Human Reliability Analysis

    International Nuclear Information System (INIS)

    Boring, Ronald; Mandelli, Diego; Joe, Jeffrey; Smith, Curtis; Groth, Katrina

    2015-01-01

    The United States (U.S.) Department of Energy (DOE) is sponsoring research through the Light Water Reactor Sustainability (LWRS) program to extend the life of the currently operating fleet of commercial nuclear power plants. The Risk Informed Safety Margin Characterization (RISMC) research pathway within LWRS looks at ways to maintain and improve the safety margins of these plants. The RISMC pathway includes significant developments in the area of thermalhydraulics code modeling and the development of tools to facilitate dynamic probabilistic risk assessment (PRA). PRA is primarily concerned with the risk of hardware systems at the plant; yet, hardware reliability is often secondary in overall risk significance to human errors that can trigger or compound undesirable events at the plant. This report highlights ongoing efforts to develop a computation-based approach to human reliability analysis (HRA). This computation-based approach differs from existing static and dynamic HRA approaches in that it: (i) interfaces with a dynamic computation engine that includes a full scope plant model, and (ii) interfaces with a PRA software toolset. The computation-based HRA approach presented in this report is called the Human Unimodels for Nuclear Technology to Enhance Reliability (HUNTER) and incorporates in a hybrid fashion elements of existing HRA methods to interface with new computational tools developed under the RISMC pathway. The goal of this research effort is to model human performance more accurately than existing approaches, thereby minimizing modeling uncertainty found in current plant risk models.

  13. Modeling soft factors in computer-based wargames

    Science.gov (United States)

    Alexander, Steven M.; Ross, David O.; Vinarskai, Jonathan S.; Farr, Steven D.

    2002-07-01

    Computer-based wargames have seen much improvement in recent years due to rapid increases in computing power. Because these games have been developed for the entertainment industry, most of these advances have centered on the graphics, sound, and user interfaces integrated into these wargames with less attention paid to the game's fidelity. However, for a wargame to be useful to the military, it must closely approximate as many of the elements of war as possible. Among the elements that are typically not modeled or are poorly modeled in nearly all military computer-based wargames are systematic effects, command and control, intelligence, morale, training, and other human and political factors. These aspects of war, with the possible exception of systematic effects, are individually modeled quite well in many board-based commercial wargames. The work described in this paper focuses on incorporating these elements from the board-based games into a computer-based wargame. This paper will also address the modeling and simulation of the systemic paralysis of an adversary that is implied by the concept of Effects Based Operations (EBO). Combining the fidelity of current commercial board wargames with the speed, ease of use, and advanced visualization of the computer can significantly improve the effectiveness of military decision making and education. Once in place, the process of converting board wargames concepts to computer wargames will allow the infusion of soft factors into military training and planning.

  14. Imports, exports, and Alberta's transmission system impact on price fluctuation

    International Nuclear Information System (INIS)

    Johnson, K.

    2002-01-01

    The roles, responsibilities and objectives of ESBI, a private for-profit company, appointed by the Alberta Government to be the Independent Transmission Administrator in the province, is sketched, prior to a discussion of price volatility in electricity, Alberta interconnections, intertie issues, the economic theory and the reality impact on prices. Given that imports and exports constitute a relatively small proportion of total generation or load in Alberta, price volatility is considered to have been only minimally affected by imports/exports. In contrast, transmission constraints, i.e. the limits on physical capacity of the existing transmission system to accommodate all desired transactions, have significant impact on imports/exports. Factors underlying constraints and price volatility such as uncertainty of generation dispatch, leading to reduced interest to invest, which in turn leads to scarce capacity for imports/exports, and the actions required to reduce uncertainty and address other issues such as congestion management, tariff design and the creation of regional transmission organizations, are also discussed to provide further clarification of the issues. It is suggested that these and other related issues need to be resolved to provide the clarity around transmission access and the tools required to manage price fluctuations

  15. Importance Of Penetration Testing For Legacy Operating System

    Directory of Open Access Journals (Sweden)

    Poorvi Bhatt

    2017-12-01

    Full Text Available Penetration testing is very important technique to find vulnerabilities in commercial networks. There are various techniques for ethical hacking via penetration testing. This report explains a white hat hacker approach of penetration testing. I have performed this test on private network where three PCs are connected through LAN via switch and without firewall. This network is not connected with Internet. All the PCs have windows operating system. The attacker host has windows server 2003 with Service Pack1 second host has windows XP with Service Pack 2 and third host has windows 2000 with service pack 4.

  16. USING COMPUTER-BASED TESTING AS ALTERNATIVE ASSESSMENT METHOD OF STUDENT LEARNING IN DISTANCE EDUCATION

    Directory of Open Access Journals (Sweden)

    Amalia SAPRIATI

    2010-04-01

    Full Text Available This paper addresses the use of computer-based testing in distance education, based on the experience of Universitas Terbuka (UT, Indonesia. Computer-based testing has been developed at UT for reasons of meeting the specific needs of distance students as the following: Ø students’ inability to sit for the scheduled test, Ø conflicting test schedules, and Ø students’ flexibility to take examination to improve their grades. In 2004, UT initiated a pilot project in the development of system and program for computer-based testing method. Then in 2005 and 2006 tryouts in the use of computer-based testing methods were conducted in 7 Regional Offices that were considered as having sufficient supporting recourses. The results of the tryouts revealed that students were enthusiastic in taking computer-based tests and they expected that the test method would be provided by UT as alternative to the traditional paper and pencil test method. UT then implemented computer-based testing method in 6 and 12 Regional Offices in 2007 and 2008 respectively. The computer-based testing was administered in the city of the designated Regional Office and was supervised by the Regional Office staff. The development of the computer-based testing was initiated with conducting tests using computers in networked configuration. The system has been continually improved, and it currently uses devices linked to the internet or the World Wide Web. The construction of the test involves the generation and selection of the test items from the item bank collection of the UT Examination Center. Thus the combination of the selected items compromises the test specification. Currently UT has offered 250 courses involving the use of computer-based testing. Students expect that more courses are offered with computer-based testing in Regional Offices within easy access by students.

  17. Applying computer-based procedures in nuclear power plants

    Energy Technology Data Exchange (ETDEWEB)

    Oliveira, Mauro V. de; Carvalho, Paulo V.R. de; Santos, Isaac J.A.L. dos; Grecco, Claudio H.S. [Instituto de Engenharia Nuclear (IEN/CNEN-RJ), Rio de Janeiro, RJ (Brazil). Div. de Instrumentacao e Confiabilidade Humana], e-mail: mvitor@ien.gov.br, e-mail: paulov@ien.gov.br, e-mail: luquetti@ien.gov.br, e-mail: grecco@ien.gov.br; Bruno, Diego S. [Universidade Federal do Rio de Janeiro (UFRJ), RJ (Brazil). Escola Politecnica. Curso de Engenharia de Controle e Automacao], e-mail: diegosalomonebruno@gmail.com

    2009-07-01

    Plant operation procedures are used to guide operators in coping with normal, abnormal or emergency situations in a process control system. Historically, the plant procedures have been paper-based (PBP), with the digitalisation trend in these complex systems computer-based procedures (CBPs) are being developed to support procedure use. This work shows briefly the research on CBPs at the Human-System Interface Laboratory (LABIHS). The emergency operation procedure EOP-0 of the LABIHS NPP simulator was implemented in the ImPRO CBP system. The ImPRO system was chosen for test because it is available for download in the Internet. A preliminary operation test using the implemented procedure in the CBP system was realized and the results were compared to the operation through PBP use. (author)

  18. Mechanisms important to later stages of streamer system development

    Science.gov (United States)

    Lehtinen, N. G.; Carlson, B.; Kochkin, P.; Østgaard, N.

    2017-12-01

    Typical streamer modeling focuses on the propagation of the streamer head and thus neglects processes such as electron detachment, electron energy relaxation, and thermalization of the electron energy distribution. These mechanisms, however, may become important at later stages of streamer system development, in particular following streamer collisions. We present a model of a later-stage streamer system development which includes these processes. A linear analysis suggests that these processes under some conditions can lead to new effects, such as excitation of waves similar to striations in the positive column of a glow discharge. Such instabilities do not occur if these mechanisms are neglected under the same conditions, although previous modeling suggested existence of wave-like phenomena during the streamer propagation [Luque et al, 2016, doi:10.1002/2015JA022234]. In the sea-level pressure air, the obtained striation-like waves may manifest as very high frequency range (>10 MHz) oscillations in plasma parameters and may have been detected in the electrode current and electromagnetic radiation measurements during laboratory spark experiments. We discuss whether the longitudinal electric field in such waves can efficiently transfer energy to charged particles, because such a process may play a role in production of x-rays.

  19. Computer-based training at Sellafield

    International Nuclear Information System (INIS)

    Cartmell, A.; Evans, M.C.

    1986-01-01

    British Nuclear Fuel Limited (BNFL) operate the United Kingdom's spent-fuel receipt, storage, and reprocessing complex at Sellafield. Spent fuel from graphite-moderated CO 2 -cooled Magnox reactors has been reprocessed at Sellafield for 22 yr. Spent fuel from light water and advanced gas reactors is stored pending reprocessing in the Thermal Oxide Reprocessing Plant currently being constructed. The range of knowledge and skills needed for plant operation, construction, and commissioning represents a formidable training requirement. In addition, employees need to be acquainted with company practices and procedures. Computer-based training (CBT) is expected to play a significant role in this process. In this paper, current applications of CBT to the filed of nuclear criticality safety are described and plans for the immediate future are outlined

  20. Introduction of the computer-based operation training tools in classrooms to support simulator training

    International Nuclear Information System (INIS)

    Noji, K.; Suzuki, K.; Kobayashi, A.

    1997-01-01

    Operation training with full-scope simulators is effective to improve trainees operation competency. To obtain more effective results of simulator training, roles of the ''classroom operation training'' closely cooperated to simulator training are important. The ''classroom operation training'' is aimed at pre- and post-studies for operation knowledge related to operation training using full-scope simulators. We have been developing computer-based operation training tools which are used in classroom training sessions. As the first step, we developed the Simulator Training Replay System. This is an aiding tool in the classroom used to enhance trainees operation performance. This system can synchronously replay plant behavior on CRT display with operators action on a video monitor in the simulator training sessions. This system is used to review plant behavior - trainees response after simulator training sessions and to understand plant behavior - operation procedure before operation training. (author)

  1. Introducing Computer-Based Testing in High-Stakes Exams in Higher Education: Results of a Field Experiment

    Science.gov (United States)

    Boevé, Anja J.; Meijer, Rob R.; Albers, Casper J.; Beetsma, Yta; Bosker, Roel J.

    2015-01-01

    The introduction of computer-based testing in high-stakes examining in higher education is developing rather slowly due to institutional barriers (the need of extra facilities, ensuring test security) and teacher and student acceptance. From the existing literature it is unclear whether computer-based exams will result in similar results as paper-based exams and whether student acceptance can change as a result of administering computer-based exams. In this study, we compared results from a computer-based and paper-based exam in a sample of psychology students and found no differences in total scores across the two modes. Furthermore, we investigated student acceptance and change in acceptance of computer-based examining. After taking the computer-based exam, fifty percent of the students preferred paper-and-pencil exams over computer-based exams and about a quarter preferred a computer-based exam. We conclude that computer-based exam total scores are similar as paper-based exam scores, but that for the acceptance of high-stakes computer-based exams it is important that students practice and get familiar with this new mode of test administration. PMID:26641632

  2. Introducing Computer-Based Testing in High-Stakes Exams in Higher Education: Results of a Field Experiment.

    Science.gov (United States)

    Boevé, Anja J; Meijer, Rob R; Albers, Casper J; Beetsma, Yta; Bosker, Roel J

    2015-01-01

    The introduction of computer-based testing in high-stakes examining in higher education is developing rather slowly due to institutional barriers (the need of extra facilities, ensuring test security) and teacher and student acceptance. From the existing literature it is unclear whether computer-based exams will result in similar results as paper-based exams and whether student acceptance can change as a result of administering computer-based exams. In this study, we compared results from a computer-based and paper-based exam in a sample of psychology students and found no differences in total scores across the two modes. Furthermore, we investigated student acceptance and change in acceptance of computer-based examining. After taking the computer-based exam, fifty percent of the students preferred paper-and-pencil exams over computer-based exams and about a quarter preferred a computer-based exam. We conclude that computer-based exam total scores are similar as paper-based exam scores, but that for the acceptance of high-stakes computer-based exams it is important that students practice and get familiar with this new mode of test administration.

  3. Biopharmaceutics classification system: importance and inclusion in biowaiver guidance

    Directory of Open Access Journals (Sweden)

    Lorena Barbosa Arrunátegui

    2015-03-01

    Full Text Available Pharmacological therapy is essential in many diseases treatment and it is important that the medicine policy is intended to offering safe and effective treatment with affordable price to the population. One way to achieve this is through biowaiver, defined as the replacement of in vivo bioequivalence studies by in vitro studies. For biowaiver of new immediate release solid oral dosage forms, data such as intestinal permeability and solubility of the drug are required, as well as the product dissolution. The Biopharmaceutics Classification System (BCS is a scientific scheme that divides drugs according to their solubility and permeability and has been used by various guides as a criterion for biowaiver. This paper evaluates biowaiver application, addressing the general concepts and parameters used by BCS, making a historical account of its use, the requirements pertaining to the current legislation, the benefits and risks associated with this decision. The results revealed that the use of BCS as a biowaiver criterion greatly expands the therapeutics options, contributing to greater therapy access of the general population with drug efficacy and safety guaranteed associated to low cost.

  4. The importance of fixed costs in animal health systems.

    Science.gov (United States)

    Tisdell, C A; Adamson, D

    2017-04-01

    In this paper, the authors detail the structure and optimal management of health systems as influenced by the presence and level of fixed costs. Unlike variable costs, fixed costs cannot be altered, and are thus independent of the level of veterinary activity in the short run. Their importance is illustrated by using both single-period and multi-period models. It is shown that multi-stage veterinary decision-making can often be envisaged as a sequence of fixed-cost problems. In general, it becomes clear that, the higher the fixed costs, the greater the net benefit of veterinary activity must be, if such activity is to be economic. The authors also assess the extent to which it pays to reduce fixed costs and to try to compensate for this by increasing variable costs. Fixed costs have major implications for the industrial structure of the animal health products industry and for the structure of the private veterinary services industry. In the former, they favour market concentration and specialisation in the supply of products. In the latter, they foster increased specialisation. While cooperation by individual farmers may help to reduce their individual fixed costs, the organisational difficulties and costs involved in achieving this cooperation can be formidable. In such cases, the only solution is government provision of veterinary services. Moreover, international cooperation may be called for. Fixed costs also influence the nature of the provision of veterinary education.

  5. A Computer- Based Digital Signal Processing for Nuclear Scintillator Detectors

    International Nuclear Information System (INIS)

    Ashour, M.A.; Abo Shosha, A.M.

    2000-01-01

    In this paper, a Digital Signal Processing (DSP) Computer-based system for the nuclear scintillation signals with exponential decay is presented. The main objective of this work is to identify the characteristics of the acquired signals smoothly, this can be done by transferring the signal environment from random signal domain to deterministic domain using digital manipulation techniques. The proposed system consists of two major parts. The first part is the high performance data acquisition system (DAQ) that depends on a multi-channel Logic Scope. Which is interfaced with the host computer through the General Purpose Interface Board (GPIB) Ver. IEEE 488.2. Also, a Graphical User Interface (GUI) has been designed for this purpose using the graphical programming facilities. The second of the system is the DSP software Algorithm which analyses, demonstrates, monitoring these data to obtain the main characteristics of the acquired signals; the amplitude, the pulse count, the pulse width, decay factor, and the arrival time

  6. Computer-Based Technologies in Dentistry: Types and Applications

    Directory of Open Access Journals (Sweden)

    Rajaa Mahdi Musawi

    2016-10-01

    Full Text Available During dental education, dental students learn how to examine patients, make diagnosis, plan treatment and perform dental procedures perfectly and efficiently. However, progresses in computer-based technologies including virtual reality (VR simulators, augmented reality (AR and computer aided design/computer aided manufacturing (CAD/CAM systems have resulted in new modalities for instruction and practice of dentistry. Virtual reality dental simulators enable repeated, objective and assessable practice in various controlled situations. Superimposition of three-dimensional (3D virtual images on actual images in AR allows surgeons to simultaneously visualize the surgical site and superimpose informative 3D images of invisible regions on the surgical site to serve as a guide. The use of CAD/CAM systems for designing and manufacturing of dental appliances and prostheses has been well established.This article reviews computer-based technologies, their application in dentistry and their potentials and limitations in promoting dental education, training and practice. Practitioners will be able to choose from a broader spectrum of options in their field of practice by becoming familiar with new modalities of training and practice.Keywords: Virtual Reality Exposure Therapy; Immersion; Computer-Aided Design; Dentistry; Education

  7. Change in Water Cycle- Important Issue on Climate Earth System

    Science.gov (United States)

    Singh, Pratik

    Change in Water Cycle- Important Issue on Climate Earth System PRATIK KUMAR SINGH1 1BALDEVRAM MIRDHA INSTITUTE OF TECHNOLOGY,JAIPUR (RAJASTHAN) ,INDIA Water is everywhere on Earth and is the only known substance that can naturally exist as a gas, liquid, and solid within the relatively small range of air temperatures and pressures found at the Earth's surface.Changes in the hydrological cycle as a consequence of climate and land use drivers are expected to play a central role in governing a vast range of environmental impacts.Earth's climate will undergo changes in response to natural variability, including solar variability, and to increasing concentrations of green house gases and aerosols.Further more, agreement is widespread that these changes may profoundly affect atmospheric water vapor concentrations, clouds and precipitation patterns.As we know that ,a warmer climate, directly leading to increased evaporation, may well accelerate the hydrological cycle, resulting in an increase in the amount of moisture circulating through the atmosphere.The Changing Water Cycle programmer will develop an integrated, quantitative understanding of the changes taking place in the global water cycle, involving all components of the earth system, improving predictions for the next few decades of regional precipitation, evapotranspiration, soil moisture, hydrological storage and fluxes.The hydrological cycle involves evaporation, transpiration, condensation, precipitation, and runoff. NASA's Aqua satellite will monitor many aspects of the role of water in the Earth's systems, and will do so at spatial and temporal scales appropriate to foster a more detailed understanding of each of the processes that contribute to the hydrological cycle. These data and the analyses of them will nurture the development and refinement of hydrological process models and a corresponding improvement in regional and global climate models, with a direct anticipated benefit of more accurate weather and

  8. Performance evaluation of communication systems via importance sampling

    NARCIS (Netherlands)

    Remondo Bueno, D.

    2000-01-01

    In the design and development of telecommunication systems, the preparation of experiments can be made more effective by predicting the system performance and its dependence on the different system parameters. This can be done by modeling the system and using performance evaluation methods. This

  9. A cloud computing based 12-lead ECG telemedicine service

    Science.gov (United States)

    2012-01-01

    Background Due to the great variability of 12-lead ECG instruments and medical specialists’ interpretation skills, it remains a challenge to deliver rapid and accurate 12-lead ECG reports with senior cardiologists’ decision making support in emergency telecardiology. Methods We create a new cloud and pervasive computing based 12-lead Electrocardiography (ECG) service to realize ubiquitous 12-lead ECG tele-diagnosis. Results This developed service enables ECG to be transmitted and interpreted via mobile phones. That is, tele-consultation can take place while the patient is on the ambulance, between the onsite clinicians and the off-site senior cardiologists, or among hospitals. Most importantly, this developed service is convenient, efficient, and inexpensive. Conclusions This cloud computing based ECG tele-consultation service expands the traditional 12-lead ECG applications onto the collaboration of clinicians at different locations or among hospitals. In short, this service can greatly improve medical service quality and efficiency, especially for patients in rural areas. This service has been evaluated and proved to be useful by cardiologists in Taiwan. PMID:22838382

  10. A cloud computing based 12-lead ECG telemedicine service.

    Science.gov (United States)

    Hsieh, Jui-Chien; Hsu, Meng-Wei

    2012-07-28

    Due to the great variability of 12-lead ECG instruments and medical specialists' interpretation skills, it remains a challenge to deliver rapid and accurate 12-lead ECG reports with senior cardiologists' decision making support in emergency telecardiology. We create a new cloud and pervasive computing based 12-lead Electrocardiography (ECG) service to realize ubiquitous 12-lead ECG tele-diagnosis. This developed service enables ECG to be transmitted and interpreted via mobile phones. That is, tele-consultation can take place while the patient is on the ambulance, between the onsite clinicians and the off-site senior cardiologists, or among hospitals. Most importantly, this developed service is convenient, efficient, and inexpensive. This cloud computing based ECG tele-consultation service expands the traditional 12-lead ECG applications onto the collaboration of clinicians at different locations or among hospitals. In short, this service can greatly improve medical service quality and efficiency, especially for patients in rural areas. This service has been evaluated and proved to be useful by cardiologists in Taiwan.

  11. A cloud computing based 12-lead ECG telemedicine service

    Directory of Open Access Journals (Sweden)

    Hsieh Jui-chien

    2012-07-01

    Full Text Available Abstract Background Due to the great variability of 12-lead ECG instruments and medical specialists’ interpretation skills, it remains a challenge to deliver rapid and accurate 12-lead ECG reports with senior cardiologists’ decision making support in emergency telecardiology. Methods We create a new cloud and pervasive computing based 12-lead Electrocardiography (ECG service to realize ubiquitous 12-lead ECG tele-diagnosis. Results This developed service enables ECG to be transmitted and interpreted via mobile phones. That is, tele-consultation can take place while the patient is on the ambulance, between the onsite clinicians and the off-site senior cardiologists, or among hospitals. Most importantly, this developed service is convenient, efficient, and inexpensive. Conclusions This cloud computing based ECG tele-consultation service expands the traditional 12-lead ECG applications onto the collaboration of clinicians at different locations or among hospitals. In short, this service can greatly improve medical service quality and efficiency, especially for patients in rural areas. This service has been evaluated and proved to be useful by cardiologists in Taiwan.

  12. Novel computer-based endoscopic camera

    Science.gov (United States)

    Rabinovitz, R.; Hai, N.; Abraham, Martin D.; Adler, Doron; Nissani, M.; Fridental, Ron; Vitsnudel, Ilia

    1995-05-01

    We have introduced a computer-based endoscopic camera which includes (a) unique real-time digital image processing to optimize image visualization by reducing over exposed glared areas and brightening dark areas, and by accentuating sharpness and fine structures, and (b) patient data documentation and management. The image processing is based on i Sight's iSP1000TM digital video processor chip and Adaptive SensitivityTM patented scheme for capturing and displaying images with wide dynamic range of light, taking into account local neighborhood image conditions and global image statistics. It provides the medical user with the ability to view images under difficult lighting conditions, without losing details `in the dark' or in completely saturated areas. The patient data documentation and management allows storage of images (approximately 1 MB per image for a full 24 bit color image) to any storage device installed into the camera, or to an external host media via network. The patient data which is included with every image described essential information on the patient and procedure. The operator can assign custom data descriptors, and can search for the stored image/data by typing any image descriptor. The camera optics has extended zoom range of f equals 20 - 45 mm allowing control of the diameter of the field which is displayed on the monitor such that the complete field of view of the endoscope can be displayed on all the area of the screen. All these features provide versatile endoscopic camera with excellent image quality and documentation capabilities.

  13. Using a micro computer based test bank

    International Nuclear Information System (INIS)

    Hamel, R.T.

    1987-01-01

    Utilizing a micro computer based test bank offers a training department many advantages and can have a positive impact upon training procedures and examination standards. Prior to data entry, Training Department management must pre-review the examination questions and answers to ensure compliance with examination standards and to verify the validity of all questions. Management must adhere to the TSD format since all questions require an enabling objective numbering scheme. Each question is entered under the enabling objective upon which it is based. Then the question is selected via the enabling objective. This eliminates any instructor bias because a random number generator chooses the test question. However, the instructor may load specific questions to create an emphasis theme for any test. The examination, answer and cover sheets are produced and printed within minutes. The test bank eliminates the large amount of time that is normally required for an instructor to formulate an examination. The need for clerical support is reduced by the elimination of typing examinations and also by the software's ability to maintain and generate student/course lists, attendance sheets, and grades. Software security measures limit access to the test bank, and the impromptu method used to generate and print an examination enhance its security

  14. A personal computer based console monitor for a TRIGA reactor

    International Nuclear Information System (INIS)

    Rieke, Phillip E.; Hood, William E.; Razvi, Junaid

    1990-01-01

    Numerous improvements have been made to the Mark F facility to provide a minimum reactor down time, giving a high reactor availability. A program was undertaken to enhance the monitoring capabilities of the instrumentation and control system on this reactor. To that end, a personal computer based console monitoring system has been developed, installed in the control room and is operational to provide real-time monitoring and display of a variety of reactor operating parameters. This system is based on commercially available hardware and an applications software package developed internally at the GA facility. It has (a) assisted the operator in controlling reactor parameters to maintain the high degree of power stability required during extended runs with thermionic devices in-core, and (b) provided data trending and archiving capabilities on all monitored channels to allow a post-mortem analysis to be performed on any of the monitored parameters

  15. Security personnel training using a computer-based game

    International Nuclear Information System (INIS)

    Ralph, J.; Bickner, L.

    1987-01-01

    Security personnel training is an integral part of a total physical security program, and is essential in enabling security personnel to perform their function effectively. Several training tools are currently available for use by security supervisors, including: textbook study, classroom instruction, and live simulations. However, due to shortcomings inherent in each of these tools, a need exists for the development of low-cost alternative training methods. This paper discusses one such alternative: a computer-based, game-type security training system. This system would be based on a personal computer with high-resolution graphics. Key features of this system include: a high degree of realism; flexibility in use and maintenance; high trainee motivation; and low cost

  16. Evaluation guidelines for microprocessor-based systems important to safety

    International Nuclear Information System (INIS)

    Adams, D.M.; Svoboda, J.M.

    1983-01-01

    Proposed criteria for the application of stored-program, digital computers in commercial nuclear power plants are presented in summary form. The emphasis is on making recommendations for the design of computer systems and on recommending a method for the regulatory review of computer system designs. More-restrictive requirements are made for protection systems than control systems or other plant computer systems. In making these recommendations, the study team reviewed current regulations, past NRC reviews of computer systems, the work done by other government agencies, and the work done by many other countries. The results provide a classification of systems, a recommended design method, and a specification of design issues to be resolved during the design and development of digital computer systems

  17. System importance measures: A new approach to resilient systems-of-systems

    Science.gov (United States)

    Uday, Payuna

    Resilience is the ability to withstand and recover rapidly from disruptions. While this attribute has been the focus of research in several fields, in the case of system-of-systems (SoSs), addressing resilience is particularly interesting and challenging. As infrastructure SoSs, such as power, transportation, and communication networks, grow in complexity and interconnectivity, measuring and improving the resilience of these SoSs is vital in terms of safety and providing uninterrupted services. The characteristics of systems-of-systems make analysis and design of resilience challenging. However, these features also offer opportunities to make SoSs resilient using unconventional methods. In this research, we present a new approach to the process of resilience design. The core idea behind the proposed design process is a set of system importance measures (SIMs) that identify systems crucial to overall resilience. Using the results from the SIMs, we determine appropriate strategies from a list of design principles to improve SoS resilience. The main contribution of this research is the development of an aid to design that provides specific guidance on where and how resources need to be targeted. Based on the needs of an SoS, decision-makers can iterate through the design process to identify a set of practical and effective design improvements. We use two case studies to demonstrate how the SIM-based design process can inform decision-making in the context of SoS resilience. The first case study focuses on a naval warfare SoS and describes how the resilience framework can leverage existing simulation models to support end-to-end design. We proceed through stages of the design approach using an agent-based model (ABM) that enables us to demonstrate how simulation tools and analytical models help determine the necessary inputs for the design process and, subsequently, inform decision-making regarding SoS resilience. The second case study considers the urban

  18. Is ‘Community’ Important for Community Information Systems?

    DEFF Research Database (Denmark)

    Freeman, Alison; Hyland, Peter; Freeman, Mark Bruce

    2013-01-01

    that inform viability (i.e. leadership, active membership, funding, awareness, and system design and functionality), and also considers the impact of community context. This study argues that the viability of a Community Information System cannot be considered in isolation. All factors are directly impacted......Community information systems have the power to transform communities. However, without fully understanding the pre-requisite factors affecting community information system viability, and the complex relationships between these factors, communities struggle to manage such projects in a way...... that leads to viable systems that deliver real benefits. This paper develops and presents a Model of Community Information System Viability Pre-requisite Factors, based on both existing literature and the study of three community information system projects. This Model represents the generic factors...

  19. Component reliability criticality or importance metrics for systems with degrading components

    NARCIS (Netherlands)

    Peng, H.; Coit, D.W.; Feng, Q.

    2012-01-01

    This paper proposes two new importance measures: one new importance measure for systems with -independent degrading components, and another one for systems with -correlated degrading components. Importance measures in previous research are inadequate for systems with degrading components because

  20. Quality assurance: Importance of systems and standard operating procedures.

    Science.gov (United States)

    Manghani, Kishu

    2011-01-01

    It is mandatory for sponsors of clinical trials and contract research organizations alike to establish, manage and monitor their quality control and quality assurance systems and their integral standard operating procedures and other quality documents to provide high-quality products and services to fully satisfy customer needs and expectations. Quality control and quality assurance systems together constitute the key quality systems. Quality control and quality assurance are parts of quality management. Quality control is focused on fulfilling quality requirements, whereas quality assurance is focused on providing confidence that quality requirements are fulfilled. The quality systems must be commensurate with the Company business objectives and business model. Top management commitment and its active involvement are critical in order to ensure at all times the adequacy, suitability, effectiveness and efficiency of the quality systems. Effective and efficient quality systems can promote timely registration of drugs by eliminating waste and the need for rework with overall financial and social benefits to the Company.

  1. The Importance of Individual Ventilation Cottage (IVC) System

    International Nuclear Information System (INIS)

    Anee Suryani Sued; Fazliana Mohd Saaya; Mohd Ramli Ibrahim; Shafii Khamis

    2015-01-01

    Experimental animals such as rats and mice are used in scientific research, especially in research related to drugs, must be able to give the right decisions and authentic. The results are not accurate and authentic will harm humans, especially in pre-clinical studies of drugs (drug) trial. Therefore, the system of individual ventilated cages (IVC) has been developed in the Malaysian Nuclear Agency to ensure that animal experiments are always at the level of quality, healthy and disease free. IVC system was developed to replace conventional animal cage systems that have been used previously. The use of IVC systems in breed and maintain rats and mice to obtain disease-free animal, the animal known as SPF (Specific pathogen free animals). For this purpose, the IVC system using 'bedding' typical food and animal pests that have been purified to ensure that it meets the intended use of the system perfectly. In addition, system privileges are through the ventilation system that can isolate the one-way air enters and exits for each cage, and equipped with a HEPA filter (High -Efficiency-Particulate Air) filter which can prevent contamination of microorganisms for ventilation in the cage and the air in the vicinity , Through the use of IVC system, the quality and health of experimental animals that are bred and used in the Medical Technology Division can be improved and so can guarantee the accuracy and validity of the results of research conducted. (author)

  2. Security Considerations and Recommendations in Computer-Based Testing

    Directory of Open Access Journals (Sweden)

    Saleh M. Al-Saleem

    2014-01-01

    Full Text Available Many organizations and institutions around the globe are moving or planning to move their paper-and-pencil based testing to computer-based testing (CBT. However, this conversion will not be the best option for all kinds of exams and it will require significant resources. These resources may include the preparation of item banks, methods for test delivery, procedures for test administration, and last but not least test security. Security aspects may include but are not limited to the identification and authentication of examinee, the risks that are associated with cheating on the exam, and the procedures related to test delivery to the examinee. This paper will mainly investigate the security considerations associated with CBT and will provide some recommendations for the security of these kinds of tests. We will also propose a palm-based biometric authentication system incorporated with basic authentication system (username/password in order to check the identity and authenticity of the examinee.

  3. Security considerations and recommendations in computer-based testing.

    Science.gov (United States)

    Al-Saleem, Saleh M; Ullah, Hanif

    2014-01-01

    Many organizations and institutions around the globe are moving or planning to move their paper-and-pencil based testing to computer-based testing (CBT). However, this conversion will not be the best option for all kinds of exams and it will require significant resources. These resources may include the preparation of item banks, methods for test delivery, procedures for test administration, and last but not least test security. Security aspects may include but are not limited to the identification and authentication of examinee, the risks that are associated with cheating on the exam, and the procedures related to test delivery to the examinee. This paper will mainly investigate the security considerations associated with CBT and will provide some recommendations for the security of these kinds of tests. We will also propose a palm-based biometric authentication system incorporated with basic authentication system (username/password) in order to check the identity and authenticity of the examinee.

  4. How important is the myeloperoxidase microbicidal system of phagocytic cells?

    Science.gov (United States)

    Thong, Y H

    1982-03-01

    The myeloperoxidase system is presented by most immunology textbooks as a major microbicidal system of phagocytic cells. This theory, however, has not bee subjected to vigorous testing in the clinical arena. Of 14 patients with primary myeloperoxidase deficiency, only 3 had infectious complication. All 3 patients have more plausible explanation than myeloperoxidase deficiency for their infectious complications. Two of these patients were healthy until middle age when they developed systemic candidiasis after the onset of diabetes mellitus. The third patient was an infant with a maturational defect in neutrophil chemotaxis whose infectious complications ceased after the normalization of the chemotactic defect. The results of these "experiments of nature" indicate that the meyloperoxidase system is not a major microbicidal mechanism of phagocytic cells.

  5. Maturity of hospital information systems: Most important influencing factors.

    Science.gov (United States)

    Vidal Carvalho, João; Rocha, Álvaro; Abreu, António

    2017-07-01

    Maturity models facilitate organizational management, including information systems management, with hospital organizations no exception. This article puts forth a study carried out with a group of experts in the field of hospital information systems management with a view to identifying the main influencing factors to be included in an encompassing maturity model for hospital information systems management. This study is based on the results of a literature review, which identified maturity models in the health field and relevant influencing factors. The development of this model is justified to the extent that the available maturity models for the hospital information systems management field reveal multiple limitations, including lack of detail, absence of tools to determine their maturity and lack of characterization for stages of maturity structured by different influencing factors.

  6. Importance sampling of rare events in chaotic systems

    DEFF Research Database (Denmark)

    Leitão, Jorge C.; Parente Lopes, João M.Viana; Altmann, Eduardo G.

    2017-01-01

    space of chaotic systems. As examples of our general framework we compute the distribution of finite-time Lyapunov exponents (in different chaotic maps) and the distribution of escape times (in transient-chaos problems). Our methods sample exponentially rare states in polynomial number of samples (in......Finding and sampling rare trajectories in dynamical systems is a difficult computational task underlying numerous problems and applications. In this paper we show how to construct Metropolis-Hastings Monte-Carlo methods that can efficiently sample rare trajectories in the (extremely rough) phase...... both low- and high-dimensional systems). An open-source software that implements our algorithms and reproduces our results can be found in reference [J. Leitao, A library to sample chaotic systems, 2017, https://github.com/jorgecarleitao/chaospp]....

  7. Pharmaceutically important plants used in traditional system of Arab ...

    African Journals Online (AJOL)

    A study on the pharmaceutical importance of some medicinal pants used for the treatment of livestock ailments was conducted during summer 2010 in different parts of Saudi Arabia, where no such study has been conducted so far. The aim of the study was to identify and document the medicinal plants used for the treatment ...

  8. The importance of managerial accounting in managerial accounting system

    OpenAIRE

    Dragan Cristian

    2014-01-01

    In order to determine the role of Managerial Accounting in a company’s information system we must start with a systematic approach. According to systematic approach, this system is a structure that produces: - transformation; - self-adjusting; - synergy (the principle of totality). Therefore, considering the above, the total is higher than the sum of the component parts, when we are referring to plus- value creation.

  9. Quality assurance: Importance of systems and standard operating procedures

    Directory of Open Access Journals (Sweden)

    Kishu Manghani

    2011-01-01

    Full Text Available It is mandatory for sponsors of clinical trials and contract research organizations alike to establish, manage and monitor their quality control and quality assurance systems and their integral standard operating procedures and other quality documents to provide high-quality products and services to fully satisfy customer needs and expectations. Quality control and quality assurance systems together constitute the key quality systems. Quality control and quality assurance are parts of quality management. Quality control is focused on fulfilling quality requirements, whereas quality assurance is focused on providing confidence that quality requirements are fulfilled. The quality systems must be commensurate with the Company business objectives and business model. Top management commitment and its active involvement are critical in order to ensure at all times the adequacy, suitability, effectiveness and efficiency of the quality systems. Effective and efficient quality systems can promote timely registration of drugs by eliminating waste and the need for rework with overall financial and social benefits to the Company.

  10. Personal computer based system to evaluate J-integral by a single specimen unloading compliance method: Pt. 2. Results on A533B Class I steel and CORONA-5

    Energy Technology Data Exchange (ETDEWEB)

    Narendrnath, K R; Margolin, H; Jung, Y H; Godavarti, P S; Murty, K L

    1988-01-01

    A personal computer based single specimen unloading technique has been demonstrated using a nuclear grade pressure vessel material, A533B Class I steel, and an ..cap alpha..-..beta.. titanium alloy, CORONA-5. Experimental parameters investigated in the case of steel include the effect of test temperature, loading rate and neutron irradiation. Results revealed the effect of dynamic strain aging (DSA) as a drop in the critical crack initiation fracture toughness (Jsub(q)); the minimum in Jsub(q) shifts to higher temperatures at higher test speeds as predicted from DSA models. In CORONA-5, the effects of microstructure and heat treatment for two different sizes of equiaxed ..cap alpha.. morphology in a ..beta..-matrix heat treated to different yield strengths were investigated. It is found that the observed higher values of Jsub(q) and tearing modulus result from a greater tortuosity of the crack path and ease of crack blunting. The largest increase in Jsub(q) occurred in fine equiaxed ..cap alpha.. microstructure aged to a nominal yield strength of 896 MPa. Results reveal potential application of the low cost technique for determining fracture toughness of engineering materials.

  11. The importance of innovations for the development of franchising systems

    OpenAIRE

    Stanković Milica

    2013-01-01

    In today's global competitive business environment, innovations are crucial for the success of the company. It is necessary to emphasize the importance of understanding wishes and needs of consumers and an innovative manner in which their needs can be met more efficiently in comparison to competition. Franchising is, certainly, one of the business concepts that is difficult to associate with innovation, as it presents the use of a proven business model. At the global level, there is a constan...

  12. Interactive computer-based instruction: Basic material control and accounting demonstration

    International Nuclear Information System (INIS)

    Keisch, B.

    1993-01-01

    The use of interactive, computer-based training (CBT) courses can be a time- and resource-saving alternative to formal instruction in a classroom milieu. With CBT, students can proceed at their own pace, fit the study course into their schedule, and avoid the extra time and effort involved in travel and other special arrangements. The demonstration given here is an abbreviated, annotated version of a recently developed course in basic material control and accounting designed for the MC and A novice. The system used is ''Quest'' which includes multi-media capabilities, individual scoring, and built-in result-reporting capabilities for the course administrator. Efficient instruction and training are more important than ever because of the growing numbers of relatively inexperienced persons becoming active in safeguards

  13. Factors of importance for a successful delivery system for proteins

    DEFF Research Database (Denmark)

    van de Weert, Marco; Jorgensen, Lene; Horn Moeller, Eva

    2005-01-01

    Protein pharmaceuticals have matured into an important class of drugs, now comprising one in three novel drugs introduced on the market. However, significant gains are still to be made in reducing the costs of production, ensuring proper pharmacokinetics and efficacy, increasing patient compliance...... and convenience, and reducing side effects such as immunogenicity. This review summarises these issues and provides recent examples of methods to reduce costs, alter pharmacokinetics and increase patient compliance. It also discusses the increasing interest in understanding immunogenicity in order to prevent...

  14. Domestic Systemically Important Banks: A Quantitative Analysis for the Chinese Banking System

    Directory of Open Access Journals (Sweden)

    Yibing Chen

    2014-01-01

    Full Text Available This paper serves as a response to the official assessment approach proposed by Basel Committee to identify domestic systemically important banks (D-SIBs in China. Our analysis presents not only current levels of domestic systemic importance of individual banks but also the changes. We also consider the systemic risk of the whole banking system, by investigating how D-SIBs and non-D-SIBs are correlated before and after the recent financial crises using Copula. We find that the systemic importance of major banks is decreasing, while some banks becoming more systemically important should require tight regulations. D-SIBs as a whole subsystem display stronger correlation with non-D-SIBs than the individual D-SIBs, which alerts the regulatory to pay attention to “too-many-to-fail” problems. Contagion effects between D-SIBs and non-D-SIBs exist during the subprime crisis, but did not exist during the European debt crisis. This yields good signal of a more balanced banking system in China.

  15. The indigenous and the imported: The New Zealand school system

    Science.gov (United States)

    Snook, Ivan

    1990-06-01

    New Zealand (Aotearoa) was colonized from Britain and the colonizers imposed on the indigenous Maori people a foreign view of education. From then on tradition has vied with local adaptations to produce a school system with substantial traces of the `Old Country' but with many local features. The curriculum for boys continued to dominate, with that for girls struggling to make itself felt. There has been constant debate about `basics' and `frills' though these terms have not been clearly defined. More recently there has been more serious consideration of the curriculum but this has been overtaken by a `market forces' view of schooling. A new administration system comes into operation on 1st October 1989. The future is unclear but it is reasonable to hope that there will continue a dialectic which may one day produce a genuine synthesis suited to the multicultural nature of Aotearoa.

  16. The Importance of Calibration on Digital Radioscopy System

    International Nuclear Information System (INIS)

    Noorhazleena Azaman; Abdul Razak Hamzah; Sapizah Rahim

    2011-01-01

    Radiography testing is one of the non-destructive testing methods where it is used to detect discontinuities in a material by using x-ray and gamma ray as a sources of radiation. Mobile digital radioscopy system (MDRS) is act as a detector or medium to capture and convert the image in a real time and the image produced can view directly from the computer connected to the MDRS. Calibration is one of the factors that we need to consider in order to get the image and see in a high resolution and good contrast. The advantage of calibration in MDRS is to reduce and avoid from the noise. Calibration is not stable and the imaging system must be calibrated periodically. It is also as an alternative to the radiographic film to reduce and saving cost and time with considerable saving in running cost and processing time. (author)

  17. Importance of systems biology in engineering microbes for biofuel production

    Energy Technology Data Exchange (ETDEWEB)

    Mukhopadhyay, Aindrila; Redding, Alyssa M.; Rutherford, Becky J.; Keasling, Jay D.

    2009-12-02

    Microorganisms have been rich sources for natural products, some of which have found use as fuels, commodity chemicals, specialty chemicals, polymers, and drugs, to name a few. The recent interest in production of transportation fuels from renewable resources has catalyzed numerous research endeavors that focus on developing microbial systems for production of such natural products. Eliminating bottlenecks in microbial metabolic pathways and alleviating the stresses due to production of these chemicals are crucial in the generation of robust and efficient production hosts. The use of systems-level studies makes it possible to comprehensively understand the impact of pathway engineering within the context of the entire host metabolism, to diagnose stresses due to product synthesis, and provides the rationale to cost-effectively engineer optimal industrial microorganisms.

  18. Collateral Composition, Diversification Risk, and Systemically Important Merchant Banks

    Czech Academy of Sciences Publication Activity Database

    Derviz, Alexis

    2014-01-01

    Roč. 14, Special Issue (2014), s. 23-34 ISSN 1572-3089 R&D Projects: GA ČR GA13-11983S Institutional support: RVO:67985556 Keywords : collateral * systemic risk * merchant bank * CoCo Subject RIV: AH - Economics Impact factor: 1.506, year: 2014 http://library.utia.cas.cz/separaty/2014/E/derviz-0433271.pdf

  19. Medication Safety Systems and the Important Role of Pharmacists.

    Science.gov (United States)

    Mansur, Jeannell M

    2016-03-01

    Preventable medication-related adverse events continue to occur in the healthcare setting. While the Institute of Medicine's To Err is Human, published in 2000, highlighted the prevalence of medical and medication-related errors in patient morbidity and mortality, there has not been significant documented progress in addressing system contributors to medication errors. The lack of progress may be related to the myriad of pharmaceutical options now available and the nuances of optimizing drug therapy to achieve desired outcomes and prevent undesirable outcomes. However, on a broader scale, there may be opportunities to focus on the design and performance of the many processes that are part of the medication system. Errors may occur in the storage, prescribing, transcription, preparation and dispensing, or administration and monitoring of medications. Each of these nodes of the medication system, with its many components, is prone to failure, resulting in harm to patients. The pharmacist is uniquely trained to be able to impact medication safety at the individual patient level through medication management skills that are part of the clinical pharmacist's role, but also to analyze the performance of medication processes and to lead redesign efforts to mitigate drug-related outcomes that may cause harm. One population that can benefit from a focus on medication safety through clinical pharmacy services and medication safety programs is the elderly, who are at risk for adverse drug events due to their many co-morbidities and the number of medications often used. This article describes the medication safety systems and provides a blueprint for creating a foundation for medication safety programs within healthcare organizations. The specific role of pharmacists and clinical pharmacy services in medication safety is also discussed here and in other articles in this Theme Issue.

  20. THE IMPORTANCY OF THE INFORMATION SYSTEM TO DESIGN FIRMS’ MANAGEMENT

    Directory of Open Access Journals (Sweden)

    Flavia R SOUZA

    2008-06-01

    Full Text Available The design firms have fundamental responsibility and represent a fundamental link in the civil construction chain of production and the discussion about management of these firms, considering their limits and particular characteristics, aims promote actions to transform them effective organisations in this production environment. The information system is the component that connects all administrative process of a company, as the operational also the strategic. With regards it, this paper aims analysing and understanding the general information architecture of a design firm through the applying of method proposed by Turban; MacLean; Wetherbe (2004 called how “Information Requirement Analysis Planning Model “. Considering the paper authors experience about administrative and technical routines of these firms obtained through the research from 2006 to 2007, the model was applied at generic routines (administrative and technical of medium and small design firms. The research was supported by a bibliography revision about Information System subject and is part of a master degree dissertation of one the authors. Key-words: design firms, management, information system.

  1. Computer-based learning for the enhancement of breastfeeding ...

    African Journals Online (AJOL)

    In this study, computer-based learning (CBL) was explored in the context of breastfeeding training for undergraduate Dietetic students. Aim: To adapt and validate an Indian computer-based undergraduate breastfeeding training module for use by South African undergraduate Dietetic students. Methods and materials: The ...

  2. An Overview of Computer-Based Natural Language Processing.

    Science.gov (United States)

    Gevarter, William B.

    Computer-based Natural Language Processing (NLP) is the key to enabling humans and their computer-based creations to interact with machines using natural languages (English, Japanese, German, etc.) rather than formal computer languages. NLP is a major research area in the fields of artificial intelligence and computational linguistics. Commercial…

  3. Women and Computer Based Technologies: A Feminist Perspective.

    Science.gov (United States)

    Morritt, Hope

    The use of computer based technologies by professional women in education is examined through a feminist standpoint theory in this paper. The theory is grounded in eight claims which form the basis of the conceptual framework for the study. The experiences of nine women participants with computer based technologies were categorized using three…

  4. CLINICAL IMPORTANCE OF INTERLEUKIN-4 IN SYSTEMIC SCLERODERMA

    Directory of Open Access Journals (Sweden)

    T A Nevskaya

    2002-01-01

    Full Text Available The aim of the study was to investigate whether serum levels of interleukin-4 ( IL-4 reflects the clinical disease status and laboratory features of systemic sclerosis (SSc. IL-4 was measured by ELISA in forty patients wilh SSc. We revealed IL-4 (Ю-lOOOpg/ml in sera from 12 of 40 pts (30%. These pts had significantly less duration of disease, the progression of skin and visceral involvement by the time of investigation and a trend lo the greater frequency of lung fibrosis. There was no correlation of IL-4 level with type of SSc. The pts with increased scrum levels of IL-4 had higher levels of circulated immune complexes, y-globulins, but the levels of acute phase reactants (CRP, fibrinogen were lower compared with the of others. We suggest that serum IL-4 may serve a biologic marker for the progression of skin and lung fibrosis, but the results require confirmation in longitudinal study.

  5. Analysis of the Important Factors for the LSDTS System

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Yong Deok; Song, Jae Hoon; Park, Chang Je; Song, Kee Chan [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

    2008-11-15

    It is confirmed that it is necessary to have domestic experience for measuring fissile material such as U-235, U-238, and Pu-239 in spent fuel or pyro-processed fuel containing TRU and to have technology related with measurement for fissile material. Understanding newly advanced measurement system for fissile material, it indicates the development directions. In this research, it is shown to the basic principle of LSDTS and it is investigated to commercial neutron source generator in order to use appropriated neutron source in the LSDTS. On the other hand, it is understood to the properties for fission chamber as induced neutron detector. It is confirmed to the relationship between slowing-down time and neutron energy in slowing-down medium. Understanding the application of SDTS, the efficiency is broaden, that is, it can help as equipment for real-time, direct, and quantitative measurement of fissile material from fuel assay such as spent fuel or pyro-processed fuel.

  6. Why decision support systems are important for medical education.

    Science.gov (United States)

    Konstantinidis, Stathis Th; Bamidis, Panagiotis D

    2016-03-01

    During the last decades, the inclusion of digital tools in health education has rapidly lead to a continuously enlarging digital era. All the online interactions between learners and tutors, the description, creation, reuse and sharing of educational digital resources and the interlinkage between them in conjunction with cheap storage technology has led to an enormous amount of educational data. Medical education is a unique type of education due to accuracy of information needed, continuous changing competences required and alternative methods of education used. Nowadays medical education standards provide the ground for organising the educational data and the paradata. Analysis of such education data through education data mining techniques is in its infancy, but decision support systems (DSSs) for medical education need further research. To the best of our knowledge, there is a gap and a clear need for identifying the challenges for DSSs in medical education in the era of medical education standards. Thus, in this Letter the role and the attributes of such a DSS for medical education are delineated and the challenges and vision for future actions are identified.

  7. Standardized Computer-based Organized Reporting of EEG: SCORE

    Science.gov (United States)

    Beniczky, Sándor; Aurlien, Harald; Brøgger, Jan C; Fuglsang-Frederiksen, Anders; Martins-da-Silva, António; Trinka, Eugen; Visser, Gerhard; Rubboli, Guido; Hjalgrim, Helle; Stefan, Hermann; Rosén, Ingmar; Zarubova, Jana; Dobesberger, Judith; Alving, Jørgen; Andersen, Kjeld V; Fabricius, Martin; Atkins, Mary D; Neufeld, Miri; Plouin, Perrine; Marusic, Petr; Pressler, Ronit; Mameniskiene, Ruta; Hopfengärtner, Rüdiger; Emde Boas, Walter; Wolf, Peter

    2013-01-01

    The electroencephalography (EEG) signal has a high complexity, and the process of extracting clinically relevant features is achieved by visual analysis of the recordings. The interobserver agreement in EEG interpretation is only moderate. This is partly due to the method of reporting the findings in free-text format. The purpose of our endeavor was to create a computer-based system for EEG assessment and reporting, where the physicians would construct the reports by choosing from predefined elements for each relevant EEG feature, as well as the clinical phenomena (for video-EEG recordings). A working group of EEG experts took part in consensus workshops in Dianalund, Denmark, in 2010 and 2011. The faculty was approved by the Commission on European Affairs of the International League Against Epilepsy (ILAE). The working group produced a consensus proposal that went through a pan-European review process, organized by the European Chapter of the International Federation of Clinical Neurophysiology. The Standardised Computer-based Organised Reporting of EEG (SCORE) software was constructed based on the terms and features of the consensus statement and it was tested in the clinical practice. The main elements of SCORE are the following: personal data of the patient, referral data, recording conditions, modulators, background activity, drowsiness and sleep, interictal findings, “episodes” (clinical or subclinical events), physiologic patterns, patterns of uncertain significance, artifacts, polygraphic channels, and diagnostic significance. The following specific aspects of the neonatal EEGs are scored: alertness, temporal organization, and spatial organization. For each EEG finding, relevant features are scored using predefined terms. Definitions are provided for all EEG terms and features. SCORE can potentially improve the quality of EEG assessment and reporting; it will help incorporate the results of computer-assisted analysis into the report, it will make

  8. Computer Based Procedures for Field Workers - FY16 Research Activities

    International Nuclear Information System (INIS)

    Oxstrand, Johanna; Bly, Aaron

    2016-01-01

    The Computer-Based Procedure (CBP) research effort is a part of the Light-Water Reactor Sustainability (LWRS) Program, which provides the technical foundations for licensing and managing the long-term, safe, and economical operation of current nuclear power plants. One of the primary missions of the LWRS program is to help the U.S. nuclear industry adopt new technologies and engineering solutions that facilitate the continued safe operation of the plants and extension of the current operating licenses. One area that could yield tremendous savings in increased efficiency and safety is in improving procedure use. A CBP provides the opportunity to incorporate context-driven job aids, such as drawings, photos, and just-in-time training. The presentation of information in CBPs can be much more flexible and tailored to the task, actual plant condition, and operation mode. The dynamic presentation of the procedure will guide the user down the path of relevant steps, thus minimizing time spent by the field worker to evaluate plant conditions and decisions related to the applicability of each step. This dynamic presentation of the procedure also minimizes the risk of conducting steps out of order and/or incorrectly assessed applicability of steps. This report provides a summary of the main research activities conducted in the Computer-Based Procedures for Field Workers effort since 2012. The main focus of the report is on the research activities conducted in fiscal year 2016. The activities discussed are the Nuclear Electronic Work Packages - Enterprise Requirements initiative, the development of a design guidance for CBPs (which compiles all insights gained through the years of CBP research), the facilitation of vendor studies at the Idaho National Laboratory (INL) Advanced Test Reactor (ATR), a pilot study for how to enhance the plant design modification work process, the collection of feedback from a field evaluation study at Plant Vogtle, and path forward to

  9. Computer Based Procedures for Field Workers - FY16 Research Activities

    Energy Technology Data Exchange (ETDEWEB)

    Oxstrand, Johanna [Idaho National Lab. (INL), Idaho Falls, ID (United States); Bly, Aaron [Idaho National Lab. (INL), Idaho Falls, ID (United States)

    2016-09-01

    The Computer-Based Procedure (CBP) research effort is a part of the Light-Water Reactor Sustainability (LWRS) Program, which provides the technical foundations for licensing and managing the long-term, safe, and economical operation of current nuclear power plants. One of the primary missions of the LWRS program is to help the U.S. nuclear industry adopt new technologies and engineering solutions that facilitate the continued safe operation of the plants and extension of the current operating licenses. One area that could yield tremendous savings in increased efficiency and safety is in improving procedure use. A CBP provides the opportunity to incorporate context-driven job aids, such as drawings, photos, and just-in-time training. The presentation of information in CBPs can be much more flexible and tailored to the task, actual plant condition, and operation mode. The dynamic presentation of the procedure will guide the user down the path of relevant steps, thus minimizing time spent by the field worker to evaluate plant conditions and decisions related to the applicability of each step. This dynamic presentation of the procedure also minimizes the risk of conducting steps out of order and/or incorrectly assessed applicability of steps. This report provides a summary of the main research activities conducted in the Computer-Based Procedures for Field Workers effort since 2012. The main focus of the report is on the research activities conducted in fiscal year 2016. The activities discussed are the Nuclear Electronic Work Packages – Enterprise Requirements initiative, the development of a design guidance for CBPs (which compiles all insights gained through the years of CBP research), the facilitation of vendor studies at the Idaho National Laboratory (INL) Advanced Test Reactor (ATR), a pilot study for how to enhance the plant design modification work process, the collection of feedback from a field evaluation study at Plant Vogtle, and path forward to

  10. Virginia Power's computer-based interactive videodisc training: a prototype for the future

    International Nuclear Information System (INIS)

    Seigler, G.G.; Adams, R.H.

    1987-01-01

    Virginia Power has developed a system and internally produced a prototype for computer-based interactive videodisc (CBIV) training. Two programs have been developed using the CBIV instructional methodology: Fire Team Retraining and General Employee Training (practical factors). In addition, the company developed a related program for conducting a videodisc tour of their nuclear power stations using a videodisc information management system (VIMS)

  11. Computer-based visual communication in aphasia.

    Science.gov (United States)

    Steele, R D; Weinrich, M; Wertz, R T; Kleczewska, M K; Carlson, G S

    1989-01-01

    The authors describe their recently developed Computer-aided VIsual Communication (C-VIC) system, and report results of single-subject experimental designs probing its use with five chronic, severely impaired aphasic individuals. Studies replicate earlier results obtained with a non-computerized system, demonstrate patient competence with the computer implementation, extend the system's utility, and identify promising areas of application. Results of the single-subject experimental designs clarify patients' learning, generalization, and retention patterns, and highlight areas of performance difficulties. Future directions for the project are indicated.

  12. Quantum computing based on semiconductor nanowires

    NARCIS (Netherlands)

    Frolov, S.M.; Plissard, S.R.; Nadj-Perge, S.; Kouwenhoven, L.P.; Bakkers, E.P.A.M.

    2013-01-01

    A quantum computer will have computational power beyond that of conventional computers, which can be exploited for solving important and complex problems, such as predicting the conformations of large biological molecules. Materials play a major role in this emerging technology, as they can enable

  13. Computer-based literature search in medical institutions in India

    Directory of Open Access Journals (Sweden)

    Kalita Jayantee

    2007-01-01

    Full Text Available Aim: To study the use of computer-based literature search and its application in clinical training and patient care as a surrogate marker of evidence-based medicine. Materials and Methods: A questionnaire comprising of questions on purpose (presentation, patient management, research, realm (site accessed, nature and frequency of search, effect, infrastructure, formal training in computer based literature search and suggestions for further improvement were sent to residents and faculty of a Postgraduate Medical Institute (PGI and a Medical College. The responses were compared amongst different subgroups of respondents. Results: Out of 300 subjects approached 194 responded; of whom 103 were from PGI and 91 from Medical College. There were 97 specialty residents, 58 super-specialty residents and 39 faculty members. Computer-based literature search was done at least once a month by 89% though there was marked variability in frequency and extent. The motivation for computer-based literature search was for presentation in 90%, research in 65% and patient management in 60.3%. The benefit of search was acknowledged in learning and teaching by 80%, research by 65% and patient care by 64.4% of respondents. Formal training in computer based literature search was received by 41% of whom 80% were residents. Residents from PGI did more frequent and more extensive computer-based literature search, which was attributed to better infrastructure and training. Conclusion: Training and infrastructure both are crucial for computer-based literature search, which may translate into evidence based medicine.

  14. AI in Computer-Based Training

    Science.gov (United States)

    Camstra, Bert

    2008-01-01

    In this paper, intelligent approaches to CBT are put into several perspectives in an attempt to elucidate the concepts and give them a more realistic (and not only glamorous) footing. The role of expert systems in training is explored and possible routes towards intelligent CBT are outlined. [This paper was first published in "Interactive Learning…

  15. [Efficiency of computer-based documentation in long-term care--preliminary project].

    Science.gov (United States)

    Lüngen, Markus; Gerber, Andreas; Rupprecht, Christoph; Lauterbach, Karl W

    2008-06-01

    In Germany the documentation of processes in long-term care is mainly paper-based. Planning, realization and evaluation are not supported in an optimal way. In a preliminary study we evaluated the consequences of the introduction of a computer-based documentation system using handheld devices. We interviewed 16 persons before and after introducing the computer-based documentation and assessed costs for the documentation process and administration. The results show that reducing costs is likely. The job satisfaction of the personnel increased, more time could be spent for caring for the residents. We suggest further research to reach conclusive results.

  16. Safeguards instrumentation: a computer-based catalog

    International Nuclear Information System (INIS)

    Fishbone, L.G.; Keisch, B.

    1981-08-01

    The information contained in this catalog is needed to provide a data base for safeguards studies and to help establish criteria and procedures for international safeguards for nuclear materials and facilities. The catalog primarily presents information on new safeguards equipment. It also describes entire safeguards systems for certain facilities, but it does not describe the inspection procedures. Because IAEA safeguards do not include physical security, devices for physical protection (as opposed to containment and surveillance) are not included. An attempt has been made to list capital costs, annual maintenance costs, replacement costs, and useful lifetime for the equipment. For equipment which is commercially available, representative sources have been listed whenever available

  17. Safeguards instrumentation: a computer-based catalog

    Energy Technology Data Exchange (ETDEWEB)

    Fishbone, L.G.; Keisch, B.

    1981-08-01

    The information contained in this catalog is needed to provide a data base for safeguards studies and to help establish criteria and procedures for international safeguards for nuclear materials and facilities. The catalog primarily presents information on new safeguards equipment. It also describes entire safeguards systems for certain facilities, but it does not describe the inspection procedures. Because IAEA safeguards do not include physical security, devices for physical protection (as opposed to containment and surveillance) are not included. An attempt has been made to list capital costs, annual maintenance costs, replacement costs, and useful lifetime for the equipment. For equipment which is commercially available, representative sources have been listed whenever available.

  18. [Problem list in computer-based patient records].

    Science.gov (United States)

    Ludwig, C A

    1997-01-14

    Computer-based clinical information systems are capable of effectively processing even large amounts of patient-related data. However, physicians depend on rapid access to summarized, clearly laid out data on the computer screen to inform themselves about a patient's current clinical situation. In introducing a clinical workplace system, we therefore transformed the problem list-which for decades has been successfully used in clinical information management-into an electronic equivalent and integrated it into the medical record. The table contains a concise overview of diagnoses and problems as well as related findings. Graphical information can also be integrated into the table, and an additional space is provided for a summary of planned examinations or interventions. The digital form of the problem list makes it possible to use the entire list or selected text elements for generating medical documents. Diagnostic terms for medical reports are transferred automatically to corresponding documents. Computer technology has an immense potential for the further development of problem list concepts. With multimedia applications sound and images will be included in the problem list. For hyperlink purpose the problem list could become a central information board and table of contents of the medical record, thus serving as the starting point for database searches and supporting the user in navigating through the medical record.

  19. Computer based aids for operator support in nuclear power plants

    International Nuclear Information System (INIS)

    1990-04-01

    In the framework of the Agency's programme on nuclear safety a survey was carried out based on a questionnaire to collect information on computer based aids for operator support in nuclear power plants in Member States. The intention was to put together a state-of-the-art report where different systems under development or already implemented would be described. This activity was also supported by an INSAG (International Nuclear Safety Advisory Group) recommendation. Two consultant's meetings were convened and their work is reflected in the two sections of the technical document. The first section, produced during the first meeting, is devoted to provide some general background material on the overall usability of Computerized Operator Decision Aids (CODAs), their advantages and shortcomings. During this first meeting, the first draft of the questionnaire was also produced. The second section presents the evaluation of the 40 questionnaires received from 11 Member States and comprises a short description of each system and some statistical and comparative observations. The ultimate goal of this activity was to inform Member States, particularly those who are considering implementation of a CODA, on the status of related developments elsewhere. 8 refs, 10 figs, 4 tabs

  20. Measuring systemic importance of financial institutions: An extreme value theory approach

    OpenAIRE

    Gravelle, Toni; Li, Fuchun

    2011-01-01

    In this paper, we define a financial institution's contribution to financial systemic risk as the increase in financial systemic risk conditional on the crash of the financial institution. The higher the contribution is, the more systemically important is the institution for the system. Based on relevant but different measurements of systemic risk, we propose a set of market-based measures on the systemic importance of financial institutions, each designed to capture certain aspects of system...

  1. AI tools in computer based problem solving

    Science.gov (United States)

    Beane, Arthur J.

    1988-01-01

    The use of computers to solve value oriented, deterministic, algorithmic problems, has evolved a structured life cycle model of the software process. The symbolic processing techniques used, primarily in research, for solving nondeterministic problems, and those for which an algorithmic solution is unknown, have evolved a different model, much less structured. Traditionally, the two approaches have been used completely independently. With the advent of low cost, high performance 32 bit workstations executing identical software with large minicomputers and mainframes, it became possible to begin to merge both models into a single extended model of computer problem solving. The implementation of such an extended model on a VAX family of micro/mini/mainframe systems is described. Examples in both development and deployment of applications involving a blending of AI and traditional techniques are given.

  2. Interactive, Computer-Based Training Program for Radiological Workers

    International Nuclear Information System (INIS)

    Trinoskey, P.A.; Camacho, P.I.; Wells, L.

    2000-01-01

    Lawrence Livermore National Laboratory (LLNL) is redesigning its Computer-Based Training (CBT) program for radiological workers. The redesign represents a major effort to produce a single, highly interactive and flexible CBT program that will meet the training needs of a wide range of radiological workers--from researchers and x-ray operators to individuals working in tritium, uranium, plutonium, and accelerator facilities. The new CBT program addresses the broad diversity of backgrounds found at a national laboratory. When a training audience is homogeneous in terms of education level and type of work performed, it is difficult to duplicate the effectiveness of a flexible, technically competent instructor who can tailor a course to the express needs and concerns of a course's participants. Unfortunately, such homogeneity is rare. At LLNL, they have a diverse workforce engaged in a wide range of radiological activities, from the fairly common to the quite exotic. As a result, the Laboratory must offer a wide variety of radiological worker courses. These include a general contamination-control course in addition to radioactive-material-handling courses for both low-level laboratory (i.e., bench-top) activities as well as high-level work in tritium, uranium, and plutonium facilities. They also offer training courses for employees who work with radiation-generating devices--x-ray, accelerator, and E-beam operators, for instance. However, even with the number and variety of courses the Laboratory offers, they are constrained by the diversity of backgrounds (i.e., knowledge and experience) of those to be trained. Moreover, time constraints often preclude in-depth coverage of site- and/or task-specific details. In response to this situation, several years ago LLNL began moving toward computer-based training for radiological workers. Today, that CBT effort includes a general radiological safety course developed by the Department of Energy's Hanford facility and a

  3. A Cost–Effective Computer-Based, Hybrid Motorised and Gravity ...

    African Journals Online (AJOL)

    A Cost–Effective Computer-Based, Hybrid Motorised and Gravity-Driven Material Handling System for the Mauritian Apparel Industry. ... Thus, many companies are investing significantly in a Research & Development department in order to design new techniques to improve worker's efficiency, and to decrease the amount ...

  4. Computer-based measurement and automatizatio aplication research in nuclear technology fields

    International Nuclear Information System (INIS)

    Jiang Hongfei; Zhang Xiangyang

    2003-01-01

    This paper introduces computer-based measurement and automatization application research in nuclear technology fields. The emphasis of narration are the role of software in the development of system, and the network measurement and control software model which has optimistic application foreground. And presents the application examples of research and development. (authors)

  5. An Investigation of Computer-based Simulations for School Crises Management.

    Science.gov (United States)

    Degnan, Edward; Bozeman, William

    2001-01-01

    Describes development of a computer-based simulation program for training school personnel in crisis management. Addresses the data collection and analysis involved in developing a simulated event, the systems requirements for simulation, and a case study of application and use of the completed simulation. (Contains 21 references.) (Authors/PKP)

  6. What Communication Theories Can Teach the Designer of Computer-Based Training.

    Science.gov (United States)

    Larsen, Ronald E.

    1985-01-01

    Reviews characteristics of computer-based training (CBT) that make application of communication theories appropriate and presents principles from communication theory (e.g., general systems theory, symbolic interactionism, rule theories, and interpersonal communication theories) to illustrate how CBT developers can profitably apply them to…

  7. Computer-Based Intepretation of the Marital Satisfaction Inventory: Use in Treatment Planning.

    Science.gov (United States)

    Snyder, Douglas K.; And Others

    1988-01-01

    Describes computer-based interpretive system for Marital Satisfaction Inventory (MSI) and application in initial phases of clinical assessment and treatment planning. Provides case study. Compares clinical findings at intake with MSI profiles for one couple obtained at termination and follow-up. Considers strengths and limitations of self-report…

  8. Computer Assisted Instructional Design for Computer-Based Instruction. Final Report. Working Papers.

    Science.gov (United States)

    Russell, Daniel M.; Pirolli, Peter

    Recent advances in artificial intelligence and the cognitive sciences have made it possible to develop successful intelligent computer-aided instructional systems for technical and scientific training. In addition, computer-aided design (CAD) environments that support the rapid development of such computer-based instruction have also been recently…

  9. The Use of Computer-Based Videogames in Knowledge Acquisition and Retention.

    Science.gov (United States)

    Ricci, Katrina E.

    1994-01-01

    Research conducted at the Naval Training Systems Center in Orlando, Florida, investigated the acquisition and retention of basic knowledge with subject matter presented in the forms of text, test, and game. Results are discussed in terms of the effectiveness of computer-based games for military training. (Author/AEF)

  10. Computer-Based Tools for Evaluating Graphical User Interfaces

    Science.gov (United States)

    Moore, Loretta A.

    1997-01-01

    The user interface is the component of a software system that connects two very complex system: humans and computers. Each of these two systems impose certain requirements on the final product. The user is the judge of the usability and utility of the system; the computer software and hardware are the tools with which the interface is constructed. Mistakes are sometimes made in designing and developing user interfaces because the designers and developers have limited knowledge about human performance (e.g., problem solving, decision making, planning, and reasoning). Even those trained in user interface design make mistakes because they are unable to address all of the known requirements and constraints on design. Evaluation of the user inter-face is therefore a critical phase of the user interface development process. Evaluation should not be considered the final phase of design; but it should be part of an iterative design cycle with the output of evaluation being feed back into design. The goal of this research was to develop a set of computer-based tools for objectively evaluating graphical user interfaces. The research was organized into three phases. The first phase resulted in the development of an embedded evaluation tool which evaluates the usability of a graphical user interface based on a user's performance. An expert system to assist in the design and evaluation of user interfaces based upon rules and guidelines was developed during the second phase. During the final phase of the research an automatic layout tool to be used in the initial design of graphical inter- faces was developed. The research was coordinated with NASA Marshall Space Flight Center's Mission Operations Laboratory's efforts in developing onboard payload display specifications for the Space Station.

  11. Screening for cognitive impairment in older individuals. Validation study of a computer-based test.

    Science.gov (United States)

    Green, R C; Green, J; Harrison, J M; Kutner, M H

    1994-08-01

    This study examined the validity of a computer-based cognitive test that was recently designed to screen the elderly for cognitive impairment. Criterion-related validity was examined by comparing test scores of impaired patients and normal control subjects. Construct-related validity was computed through correlations between computer-based subtests and related conventional neuropsychological subtests. University center for memory disorders. Fifty-two patients with mild cognitive impairment by strict clinical criteria and 50 unimpaired, age- and education-matched control subjects. Control subjects were rigorously screened by neurological, neuropsychological, imaging, and electrophysiological criteria to identify and exclude individuals with occult abnormalities. Using a cut-off total score of 126, this computer-based instrument had a sensitivity of 0.83 and a specificity of 0.96. Using a prevalence estimate of 10%, predictive values, positive and negative, were 0.70 and 0.96, respectively. Computer-based subtests correlated significantly with conventional neuropsychological tests measuring similar cognitive domains. Thirteen (17.8%) of 73 volunteers with normal medical histories were excluded from the control group, with unsuspected abnormalities on standard neuropsychological tests, electroencephalograms, or magnetic resonance imaging scans. Computer-based testing is a valid screening methodology for the detection of mild cognitive impairment in the elderly, although this particular test has important limitations. Broader applications of computer-based testing will require extensive population-based validation. Future studies should recognize that normal control subjects without a history of disease who are typically used in validation studies may have a high incidence of unsuspected abnormalities on neurodiagnostic studies.

  12. Reheating breakfast: Age and multitasking on a computer-based and a non-computer-based task

    OpenAIRE

    Feinkohl, I.; Cress, U.; Kimmerle, J.

    2016-01-01

    Computer-based assessments are popular means to measure individual differences, including age differences, in cognitive ability, but are rarely tested for the extent to which they correspond to more realistic behavior. In the present study, we explored the extent to which performance on an existing computer-based task of multitasking ('cooking breakfast') may be generalizable by comparing it with a newly developed version of the same task that required interaction with physical objects. Twent...

  13. Application of the Decomposition Method to the Design Complexity of Computer-based Display

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Hyoung Ju; Lee, Seung Woo; Seong, Poong Hyun [Korea Advanced Institute of Science and Technology, Daejeon (Korea, Republic of); Park, Jin Kyun [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

    2012-05-15

    The importance of the design of human machine interfaces (HMIs) for human performance and safety has long been recognized in process industries. In case of nuclear power plants (NPPs), HMIs have significant implications for the safety of the NPPs since poor implementation of HMIs can impair the operators' information searching ability which is considered as one of the important aspects of human behavior. To support and increase the efficiency of the operators' information searching behavior, advanced HMIs based on computer technology are provided. Operators in advanced main control room (MCR) acquire information through video display units (VDUs), and large display panel (LDP) required for the operation of NPPs. These computer-based displays contain a very large quantity of information and present them in a variety of formats than conventional MCR. For example, these displays contain more elements such as abbreviations, labels, icons, symbols, coding, and highlighting than conventional ones. As computer-based displays contain more information, complexity of the elements becomes greater due to less distinctiveness of each element. A greater understanding is emerging about the effectiveness of designs of computer-based displays, including how distinctively display elements should be designed. And according to Gestalt theory, people tend to group similar elements based on attributes such as shape, color or pattern based on the principle of similarity. Therefore, it is necessary to consider not only human operator's perception but the number of element consisting of computer-based display

  14. Application of the Decomposition Method to the Design Complexity of Computer-based Display

    International Nuclear Information System (INIS)

    Kim, Hyoung Ju; Lee, Seung Woo; Seong, Poong Hyun; Park, Jin Kyun

    2012-01-01

    The importance of the design of human machine interfaces (HMIs) for human performance and safety has long been recognized in process industries. In case of nuclear power plants (NPPs), HMIs have significant implications for the safety of the NPPs since poor implementation of HMIs can impair the operators' information searching ability which is considered as one of the important aspects of human behavior. To support and increase the efficiency of the operators' information searching behavior, advanced HMIs based on computer technology are provided. Operators in advanced main control room (MCR) acquire information through video display units (VDUs), and large display panel (LDP) required for the operation of NPPs. These computer-based displays contain a very large quantity of information and present them in a variety of formats than conventional MCR. For example, these displays contain more elements such as abbreviations, labels, icons, symbols, coding, and highlighting than conventional ones. As computer-based displays contain more information, complexity of the elements becomes greater due to less distinctiveness of each element. A greater understanding is emerging about the effectiveness of designs of computer-based displays, including how distinctively display elements should be designed. And according to Gestalt theory, people tend to group similar elements based on attributes such as shape, color or pattern based on the principle of similarity. Therefore, it is necessary to consider not only human operator's perception but the number of element consisting of computer-based display

  15. Development of an Integrated, Computer-Based Bibliographical Data System for a Large University Library. Annual Report to the National Science Foundation from the University of Chicago Library, 1966/67.

    Science.gov (United States)

    Fussler, Herman; Payne, Charles T.

    Part I is a discussion of the following project tasks: A) development of an on-line, real-time bibliographic data processing system; B) implementation in library operations; C) character sets; D) Project MARC; E) circulation; and F) processing operation studies. Part II is a brief discussion of efforts to work out cooperative library systems…

  16. Computer-based irrigation scheduling for cotton crop

    International Nuclear Information System (INIS)

    Laghari, K.Q.; Memon, H.M.

    2008-01-01

    In this study a real time irrigation schedule for cotton crop has been tested using mehran model, a computer-based DDS (Decision Support System). The irrigation schedule was set on selected MAD (Management Allowable Depletion) and the current root depth position. The total 451 mm irrigation water applied to the crop field. The seasonal computed crop ET (Evapotranspiration) was estimated 421.32 mm and actual (ET/sub ca/) observed was 413 mm. The model over-estimated seasonal ET by only 1.94. WUE (Water Use Efficiency) for seed-cotton achieved 6.59 Kg (ha mm)/sup -1/. The statistical analysis (R/sup 2/=0.96, ARE%=2.00, T-1.17 and F=550.57) showed good performance of the model in simulated and observed ET values. The designed Mehran model is designed quite versatile for irrigation scheduling and can be successfully used as irrigation DSS tool for various crop types. (author)

  17. Trend of computer-based console for nuclear power plants

    International Nuclear Information System (INIS)

    Wajima, Tsunetaka; Serizawa, Michiya

    1975-01-01

    The amount of informations to be watched by the operators in the central operation room increased with the increase of the capacity of nuclear power generation plants, and the necessity of computer-based consoles, in which the informations are compiled and the rationalization of the interface between the operators and the plants is intended by introducing CRT displays and process computers, became to be recognized. The integrated monitoring and controlling system is explained briefly by taking Dungeness B Nuclear Power Station in Britain as a typical example. This power station comprises two AGRs, and these two plants can be controlled in one central control room, each by one man. Three computers including stand-by one are installed. Each computer has the core memory of 16 K words (24 bits/word), and 4 magnetic drums of 256 K words are installed as the external memory. The peripheral equipments are 12 CRT displays, 6 typewriters, high speed tape reader and tape punch for each plant. The display and record of plant data, the analysis, display and record of alarms, the control of plants including reactors, and post incident record are assigned to the computers. In Hitachi Ltd. in Japan, the introduction of color CRTs, the developments of operating consoles, new data-accessing method, and the consoles for maintenance management are in progress. (Kako, I.)

  18. SAFETY CRITERION IN ASSESSING THE IMPORTANCE OF AN ELEMENT IN THE COMPLEX TECHNOLOGICAL SYSTEM RELIABILITY STRUCTURE

    Directory of Open Access Journals (Sweden)

    Leszek CHYBOWSKI

    2012-01-01

    Full Text Available The paper presents the need to develop a description of the importance of the technological systems reliability structure elements in terms of security of the system. Basic issues related to the exploration of weak links and important elements in the system as well as a proposal to develop the current approach to assessing the importance of the system components have been presented. Moreover, the differences between the unreliability of suitability and unreliability of safety have been pointed out.

  19. Effective handling of software anomalies in computer based systems at nuclear power plants. Report prepared within the framework of the International Working Group on Nuclear Power Plant Control and Instrumentation

    International Nuclear Information System (INIS)

    2000-03-01

    This report reviews possible types of anomalies that are related to software in nuclear power plants, outlines techniques that can be used to identify anomalies throughout the entire software life-cycle, and discusses important issues that must be considered during anomaly investigation and resolution. Typically, anomalies are identified, investigated and resolved during the normal process of developing or maintaining plant software, where these activities are covered by procedures and tools that are part of this process. Nevertheless, to reduce the number and impact of anomalies under plant operating conditions, it is important to ensure that good plans, procedures and tools are in place throughout the software life-cycle. The need for this was pointed out by the IAEA International Working Group on Nuclear Power Plant Control and Instrumentation (IWG-NPPCI). The report is the result of a series of consultants meetings held by the IAEA in 1997 and 1998 in Vienna. It was prepared with the participation and contributions of experts from Austria, Canada, Germany, Hungary, the United Kingdom and the United States of America. The scope of activities described in this report covers a methodology for anomaly identification, anomaly investigation and anomaly resolution. The activities to be done within these steps strongly depend on the safety category of the software, the actual life-cycle phase of the software, the type of the software and the severity of the anomaly

  20. Assessment of importance of elements for systems that condition depends on the sequence of elements failures

    International Nuclear Information System (INIS)

    Povyakalo, A.A.

    1996-01-01

    This paper proposes new general formulas for calculation of indices of elements importance for systems whose condition depends on sequence of elements failures. These systems have been called as systems with memory of failures (M-systems). Techniques existing for assessment of importance of elements are based on the Bool's models of system reliability, for which it is significant to suggest, that in every period of time system state depends only on a combination of states of elements at that very moment of time. These systems have been called as combinational systems (C-systems). Reliability of M-systems at any moment of operating time is a functional having distributions of elements time before failure as its arguments. Bool's models and methods of assessment of element importance, based on these models, are not appropriate for these systems. Pereguda and Povyakalo proposed the new techniques for assessment of elements importance for PO-SS systems that includes Protection Object (PO) and Safety System (PO). PO-SS system is an example of M-system. That technique is used at this paper as a basis for more general consideration. It has been shown that technique proposed for assessment of elements importance for M-systems has well-known Birnbaum's method as its particular case. Also the system with double protection is considered as an example

  1. Development of an Evaluation Method for the Design Complexity of Computer-Based Displays

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Hyoung Ju; Lee, Seung Woo; Kang, Hyun Gook; Seong, Poong Hyun [KAIST, Daejeon (Korea, Republic of); Park, Jin Kyun [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

    2011-10-15

    The importance of the design of human machine interfaces (HMIs) for human performance and the safety of process industries has long been continuously recognized for many decades. Especially, in the case of nuclear power plants (NPPs), HMIs have significant implications for the safety of the NPPs because poor HMIs can impair the decision making ability of human operators. In order to support and increase the decision making ability of human operators, advanced HMIs based on the up-to-date computer technology are provided. Human operators in advanced main control room (MCR) acquire information through video display units (VDUs) and large display panel (LDP), which is required for the operation of NPPs. These computer-based displays contain a huge amount of information and present it with a variety of formats compared to those of a conventional MCR. For example, these displays contain more display elements such as abbreviations, labels, icons, symbols, coding, etc. As computer-based displays contain more information, the complexity of advanced displays becomes greater due to less distinctiveness of each display element. A greater understanding is emerging about the effectiveness of designs of computer-based displays, including how distinctively display elements should be designed. This study covers the early phase in the development of an evaluation method for the design complexity of computer-based displays. To this end, a series of existing studies were reviewed to suggest an appropriate concept that is serviceable to unravel this problem

  2. ARAC: a computer-based emergency dose-assessment service

    International Nuclear Information System (INIS)

    Sullivan, T.J.

    1990-01-01

    Over the past 15 years, the Lawrence Livermore National Laboratory's Atmospheric Release Advisory Capability (ARAC) has developed and evolved a computer-based, real-time, radiological-dose-assessment service for the United States Departments of Energy and Defense. This service is built on the integrated components of real-time computer-acquired meteorological data, extensive computer databases, numerical atmospheric-dispersion models, graphical displays, and operational-assessment-staff expertise. The focus of ARAC is the off-site problem where regional meteorology and topography are dominant influences on transport and dispersion. Through application to numerous radiological accidents/releases on scales from small accidental ventings to the Chernobyl reactor disaster, ARAC has developed methods to provide emergency dose assessments from the local to the hemispheric scale. As the power of computers has evolved inversely with respect to cost and size, ARAC has expanded its service and reduced the response time from hours to minutes for an accident within the United States. Concurrently the quality of the assessments has improved as more advanced models have been developed and incorporated into the ARAC system. Over the past six years, the number of directly connected facilities has increased from 6 to 73. All major U.S. Federal agencies now have access to ARAC via the Department of Energy. This assures a level of consistency as well as experience. ARAC maintains its real-time skills by participation in approximately 150 exercises per year; ARAC also continuously validates its modeling systems by application to all available tracer experiments and data sets

  3. SIDA - System for importation distribution and acquisition of radioisotope - User manual

    International Nuclear Information System (INIS)

    1991-01-01

    The SIDA manual (system for importation, distribution and acquisition of radioisotopes) is presented. The SIDA is a system of consult and update to control importation and distribution of radioisotopes in the country. It allows to accompany processes from importation requirement to distribution of radioisotopes, executing the accountancy of I-125, which is distributed for several interprises. The system was developed in CLIPPER87 using DBASE III PLUS data base management. (M.C.K.)

  4. Computer-based and web-based radiation safety training

    Energy Technology Data Exchange (ETDEWEB)

    Owen, C., LLNL

    1998-03-01

    The traditional approach to delivering radiation safety training has been to provide a stand-up lecture of the topic, with the possible aid of video, and to repeat the same material periodically. New approaches to meeting training requirements are needed to address the advent of flexible work hours and telecommuting, and to better accommodate individuals learning at their own pace. Computer- based and web-based radiation safety training can provide this alternative. Computer-based and web- based training is an interactive form of learning that the student controls, resulting in enhanced and focused learning at a time most often chosen by the student.

  5. A Cloud-Computing-Based Data Placement Strategy in High-Speed Railway

    Directory of Open Access Journals (Sweden)

    Hanning Wang

    2012-01-01

    Full Text Available As an important component of China’s transportation data sharing system, high-speed railway data sharing is a typical application of data-intensive computing. Currently, most high-speed railway data is shared in cloud computing environment. Thus, there is an urgent need for an effective cloud-computing-based data placement strategy in high-speed railway. In this paper, a new data placement strategy named hierarchical structure data placement strategy is proposed. The proposed method combines the semidefinite programming algorithm with the dynamic interval mapping algorithm. The semi-definite programming algorithm is suitable for the placement of files with various replications, ensuring that different replications of a file are placed on different storage devices, while the dynamic interval mapping algorithm ensures better self-adaptability of the data storage system. A hierarchical data placement strategy is proposed for large-scale networks. In this paper, a new theoretical analysis is provided, which is put in comparison with several other previous data placement approaches, showing the efficacy of the new analysis in several experiments.

  6. Design Guidance for Computer-Based Procedures for Field Workers

    Energy Technology Data Exchange (ETDEWEB)

    Oxstrand, Johanna [Idaho National Lab. (INL), Idaho Falls, ID (United States); Le Blanc, Katya [Idaho National Lab. (INL), Idaho Falls, ID (United States); Bly, Aaron [Idaho National Lab. (INL), Idaho Falls, ID (United States)

    2016-09-01

    Nearly all activities that involve human interaction with nuclear power plant systems are guided by procedures, instructions, or checklists. Paper-based procedures (PBPs) currently used by most utilities have a demonstrated history of ensuring safety; however, improving procedure use could yield significant savings in increased efficiency, as well as improved safety through human performance gains. The nuclear industry is constantly trying to find ways to decrease human error rates, especially human error rates associated with procedure use. As a step toward the goal of improving field workers’ procedure use and adherence and hence improve human performance and overall system reliability, the U.S. Department of Energy Light Water Reactor Sustainability (LWRS) Program researchers, together with the nuclear industry, have been investigating the possibility and feasibility of replacing current paper-based procedures with computer-based procedures (CBPs). PBPs have ensured safe operation of plants for decades, but limitations in paper-based systems do not allow them to reach the full potential for procedures to prevent human errors. The environment in a nuclear power plant is constantly changing, depending on current plant status and operating mode. PBPs, which are static by nature, are being applied to a constantly changing context. This constraint often results in PBPs that are written in a manner that is intended to cover many potential operating scenarios. Hence, the procedure layout forces the operator to search through a large amount of irrelevant information to locate the pieces of information relevant for the task and situation at hand, which has potential consequences of taking up valuable time when operators must be responding to the situation, and potentially leading operators down an incorrect response path. Other challenges related to use of PBPs are management of multiple procedures, place-keeping, finding the correct procedure for a task, and relying

  7. CLOUD COMPUTING BASED INFORMATION SYSTEMS -PRESENT AND FUTURE

    Directory of Open Access Journals (Sweden)

    Maximilian ROBU

    2012-12-01

    Full Text Available The current economic crisis and the global recession have affected the IT market as well. A solution camefrom the Cloud Computing area by optimizing IT budgets and eliminating different types of expenses (servers, licenses,and so on. Cloud Computing is an exciting and interesting phenomenon, because of its relative novelty and explodinggrowth. Because of its raise in popularity and usage Cloud Computing has established its role as a research topic.However the tendency is to focus on the technical aspects of Cloud Computing, thus leaving the potential that thistechnology offers unexplored. With the help of this technology new market player arise and they manage to break thetraditional value chain of service provision. The main focus of this paper is the business aspects of Cloud. In particularwe will talk about the economic aspects that cover using Cloud Computing (when, why and how to use, and theimpacts on the infrastructure, the legalistic issues that come from using Cloud Computing; the scalability and partiallyunclear legislation.

  8. The Potential for Computer Based Systems in Modular Engineering

    DEFF Research Database (Denmark)

    Miller, Thomas Dedenroth

    1998-01-01

    The paper elaborates on knowledge management and the possibility for computer support of the design process of pharmaceutical production plants in relation to the ph.d. project modular engineering.......The paper elaborates on knowledge management and the possibility for computer support of the design process of pharmaceutical production plants in relation to the ph.d. project modular engineering....

  9. Computer-Based Self-Instructional Modules. Final Technical Report.

    Science.gov (United States)

    Weinstock, Harold

    Reported is a project involving seven chemists, six mathematicians, and six physicists in the production of computer-based, self-study modules for use in introductory college courses in chemistry, physics, and mathematics. These modules were designed to be used by students and instructors with little or no computer backgrounds, in institutions…

  10. Strategic Planning for Computer-Based Educational Technology.

    Science.gov (United States)

    Bozeman, William C.

    1984-01-01

    Offers educational practitioners direction for the development of a master plan for the implementation and application of computer-based educational technology by briefly examining computers in education, discussing organizational change from a theoretical perspective, and presenting an overview of the planning strategy known as the planning and…

  11. Content Analysis of a Computer-Based Faculty Activity Repository

    Science.gov (United States)

    Baker-Eveleth, Lori; Stone, Robert W.

    2013-01-01

    The research presents an analysis of faculty opinions regarding the introduction of a new computer-based faculty activity repository (FAR) in a university setting. The qualitative study employs content analysis to better understand the phenomenon underlying these faculty opinions and to augment the findings from a quantitative study. A web-based…

  12. The Use of Audio and Animation in Computer Based Instruction.

    Science.gov (United States)

    Koroghlanian, Carol; Klein, James D.

    This study investigated the effects of audio, animation, and spatial ability in a computer-based instructional program for biology. The program presented instructional material via test or audio with lean text and included eight instructional sequences presented either via static illustrations or animations. High school students enrolled in a…

  13. Computer-Based Interaction Analysis with DEGREE Revisited

    Science.gov (United States)

    Barros, B.; Verdejo, M. F.

    2016-01-01

    We review our research with "DEGREE" and analyse how our work has impacted the collaborative learning community since 2000. Our research is framed within the context of computer-based interaction analysis and the development of computer-supported collaborative learning (CSCL) tools. We identify some aspects of our work which have been…

  14. The Accuracy of Cognitive Monitoring during Computer-Based Instruction.

    Science.gov (United States)

    Garhart, Casey; Hannafin, Michael J.

    This study was conducted to determine the accuracy of learners' comprehension monitoring during computer-based instruction and to assess the relationship between enroute monitoring and different levels of learning. Participants were 50 university undergraduate students enrolled in an introductory educational psychology class. All students received…

  15. Evolution of a Computer-Based Testing Laboratory

    Science.gov (United States)

    Moskal, Patrick; Caldwell, Richard; Ellis, Taylor

    2009-01-01

    In 2003, faced with increasing growth in technology-based and large-enrollment courses, the College of Business Administration at the University of Central Florida opened a computer-based testing lab to facilitate administration of course examinations. Patrick Moskal, Richard Caldwell, and Taylor Ellis describe the development and evolution of the…

  16. Optimal Sequential Rules for Computer-Based Instruction.

    Science.gov (United States)

    Vos, Hans J.

    1998-01-01

    Formulates sequential rules for adapting the appropriate amount of instruction to learning needs in the context of computer-based instruction. Topics include Bayesian decision theory, threshold and linear-utility structure, psychometric model, optimal sequential number of test questions, and an empirical example of sequential instructional…

  17. The use of computer based instructions to enhance Rwandan ...

    African Journals Online (AJOL)

    Annestar

    (2) To what extent the newly acquired ICT skills impact on teachers' competency? (3) How suitable is computer based instruction to enhance teachers' continuous professional development? Literature review. ICT competency for teachers. Regardless of the quantity and quality of technology available in classrooms, the key ...

  18. Issues in Text Design and Layout for Computer Based Communications.

    Science.gov (United States)

    Andresen, Lee W.

    1991-01-01

    Discussion of computer-based communications (CBC) focuses on issues involved with screen design and layout for electronic text, based on experiences with electronic messaging, conferencing, and publishing within the Australian Open Learning Information Network (AOLIN). Recommendations for research on design and layout for printed text are also…

  19. Development of Computer-Based Resources for Textile Education.

    Science.gov (United States)

    Hopkins, Teresa; Thomas, Andrew; Bailey, Mike

    1998-01-01

    Describes the production of computer-based resources for students of textiles and engineering in the United Kingdom. Highlights include funding by the Teaching and Learning Technology Programme (TLTP), courseware author/subject expert interaction, usage test and evaluation, authoring software, graphics, computer-aided design simulation, self-test…

  20. A computer-based teaching programme (CBTP) developed for ...

    African Journals Online (AJOL)

    The nursing profession, like other professions, is focused on preparing students for practice, and particular attention must be paid to the ability of student nurses to extend their knowledge and to solve nursing care problems effectively. A computer-based teaching programme (CBTP) for clinical practice to achieve these ...

  1. Evaluation of computer-based library services at Kenneth Dike ...

    African Journals Online (AJOL)

    This study evaluated computer-based library services/routines at Kenneth Dike Library, University of Ibadan. Four research questions were developed and answered. A survey research design was adopted; using questionnaire as the instrument for data collection. A total of 200 respondents randomly selected from 10 ...

  2. A Computer-Based Instrument That Identifies Common Science Misconceptions

    Science.gov (United States)

    Larrabee, Timothy G.; Stein, Mary; Barman, Charles

    2006-01-01

    This article describes the rationale for and development of a computer-based instrument that helps identify commonly held science misconceptions. The instrument, known as the Science Beliefs Test, is a 47-item instrument that targets topics in chemistry, physics, biology, earth science, and astronomy. The use of an online data collection system…

  3. Implementing Computer-Based Procedures: Thinking Outside the Paper Margins

    Energy Technology Data Exchange (ETDEWEB)

    Oxstrand, Johanna; Bly, Aaron

    2017-06-01

    In the past year there has been increased interest from the nuclear industry in adopting the use of electronic work packages and computer-based procedures (CBPs) in the field. The goal is to incorporate the use of technology in order to meet the Nuclear Promise requirements of reducing costs and improve efficiency and decrease human error rates of plant operations. Researchers, together with the nuclear industry, have been investigating the benefits an electronic work package system and specifically CBPs would have over current paper-based procedure practices. There are several classifications of CBPs ranging from a straight copy of the paper-based procedure in PDF format to a more intelligent dynamic CBP. A CBP system offers a vast variety of improvements, such as context driven job aids, integrated human performance tools (e.g., placekeeping and correct component verification), and dynamic step presentation. The latter means that the CBP system could only display relevant steps based on operating mode, plant status, and the task at hand. The improvements can lead to reduction of the worker’s workload and human error by allowing the work to focus on the task at hand more. A team of human factors researchers at the Idaho National Laboratory studied and developed design concepts for CBPs for field workers between 2012 and 2016. The focus of the research was to present information in a procedure in a manner that leveraged the dynamic and computational capabilities of a handheld device allowing the worker to focus more on the task at hand than on the administrative processes currently applied when conducting work in the plant. As a part of the research the team identified type of work, instructions, and scenarios where the transition to a dynamic CBP system might not be as beneficial as it would for other types of work in the plant. In most cases the decision to use a dynamic CBP system and utilize the dynamic capabilities gained will be beneficial to the worker

  4. Computer-Based Simulation Games in Public Administration Education

    Directory of Open Access Journals (Sweden)

    Kutergina Evgeniia

    2017-12-01

    Full Text Available Computer simulation, an active learning technique, is now one of the advanced pedagogical technologies. Th e use of simulation games in the educational process allows students to gain a firsthand understanding of the processes of real life. Public- administration, public-policy and political-science courses increasingly adopt simulation games in universities worldwide. Besides person-to-person simulation games, there are computer-based simulations in public-administration education. Currently in Russia the use of computer-based simulation games in Master of Public Administration (MPA curricula is quite limited. Th is paper focuses on computer- based simulation games for students of MPA programmes. Our aim was to analyze outcomes of implementing such games in MPA curricula. We have done so by (1 developing three computer-based simulation games about allocating public finances, (2 testing the games in the learning process, and (3 conducting a posttest examination to evaluate the effect of simulation games on students’ knowledge of municipal finances. Th is study was conducted in the National Research University Higher School of Economics (HSE and in the Russian Presidential Academy of National Economy and Public Administration (RANEPA during the period of September to December 2015, in Saint Petersburg, Russia. Two groups of students were randomly selected in each university and then randomly allocated either to the experimental or the control group. In control groups (n=12 in HSE, n=13 in RANEPA students had traditional lectures. In experimental groups (n=12 in HSE, n=13 in RANEPA students played three simulation games apart from traditional lectures. Th is exploratory research shows that the use of computer-based simulation games in MPA curricula can improve students’ outcomes by 38 %. In general, the experimental groups had better performances on the post-test examination (Figure 2. Students in the HSE experimental group had 27.5 % better

  5. Component state-based integrated importance measure for multi-state systems

    International Nuclear Information System (INIS)

    Si, Shubin; Levitin, Gregory; Dui, Hongyan; Sun, Shudong

    2013-01-01

    Importance measures in reliability engineering are used to identify weak components and/or states in contributing to the reliable functioning of a system. Traditionally, importance measures do not consider the possible effect of groups of transition rates among different component states, which, however, has great effect on the component probability distribution and should therefore be taken into consideration. This paper extends the integrated importance measure (IIM) to estimate the effect of a component residing at certain states on the performance of the entire multi-state systems. This generalization of IIM describes in which state it is most worthy to keep the component to provide the desired level of system performance, and which component is the most important to keep in some state and above for improving the performance of the system. An application to an oil transportation system is presented to illustrate the use of the suggested importance measure

  6. Instrumentation and control systems important to safety in nuclear power plants. Safety guide

    International Nuclear Information System (INIS)

    2005-01-01

    This Safety Guide was prepared under the IAEA programme for establishing safety standards for nuclear power plants. It supplements Safety Standards Series No. NS-R-1: Safety of Nuclear Power Plants: Design (the Requirements for Design), which establishes the design requirements for ensuring the safety of nuclear power plants. This Safety Guide describes how the requirements should be met for instrumentation and control (I and C) systems important to safety. This publication is a revision and combination of two previous Safety Guides: Safety Series Nos 50-SG-D3 and 50-SG-D8, which are superseded by this new Safety Guide. The revision takes account of developments in I and C systems important to safety since the earlier Safety Guides were published in 1980 and 1984, respectively. The objective of this Safety Guide is to provide guidance on the design of I and C systems important to safety in nuclear power plants, including all I and C components, from the sensors allocated to the mechanical systems to the actuated equipment, operator interfaces and auxiliary equipment. This Safety Guide deals mainly with design requirements for those I and C systems that are important to safety. It expands on paragraphs of Ref in the area of I and C systems important to safety. This publication is intended for use primarily by designers of nuclear power plants and also by owners and/or operators and regulators of nuclear power plants. This Safety Guide provides general guidance on I and C systems important to safety which is broadly applicable to many nuclear power plants. More detailed requirements and limitations for safe operation specific to a particular plant type should be established as part of the design process. The present guidance is focused on the design principles for systems important to safety that warrant particular attention, and should be applied to both the design of new I and C systems and the modernization of existing systems. Guidance is provided on how design

  7. Computer-Based Monitoring and Remote Controlling for Oil Well Pumps Using Scada

    Directory of Open Access Journals (Sweden)

    Rudi Tjiptadi

    2011-12-01

    Full Text Available The research aims to change manually the monitoring and controlling of oil well pumps into a computer-based system using SCADA (Supervisory and Data Acquisition system. To design the protection system which consists of controller unit and display system, RTU (Remote Terminal Unit and MTU (Master Terminal Unit are used. The research results in a controller unit which is able to communicate to personal computer using RS-232 C and an alarm system to protect oil pump motors by detecting sensors installed at the pumps. 

  8. An exploration study to find important factors influencing on expert systems

    Directory of Open Access Journals (Sweden)

    Naser Azad

    2013-09-01

    Full Text Available Knowledge management plays an important role in modern management systems since many existing systems move towards learning organizations. Expert systems, on the other hand, are considered as the most popular techniques for adapting recent developments on knowledge management. This paper presents an empirical investigation to find important factors influencing adaptation of expert systems. The proposed study designs a questionnaire in Likert scale consists of 25 questions, distributes it among 258 people who have recently graduated from computer science and they are familiar with implementation of expert systems. Cronbach alpha is calculated as 0.730 and Kaiser-Meyer-Olkin Measure of Sampling Adequacy and Approx. Chi-Square are 0.748 and 1377.397, respectively. The study has implemented principal component analysis and the results have indicated that there were four factors influencing expert systems including systems management, intelligence systems, system analysis and specialized analysis.

  9. Computer based virtual reality approach towards its application in an accidental emergency at nuclear power plant

    International Nuclear Information System (INIS)

    Yan Jun; Yao Qingshan

    1999-01-01

    Virtual reality is a computer based system for creating and receiving virtual world. As an emerging branch of computer discipline, this approach is extensively expanding and widely used in variety of industries such as national defence, research, engineering, medicine and air navigation. The author intends to present the fundamentals of virtual reality, in attempt to study some interested aspects for use in nuclear power emergency planning

  10. A shared computer-based problem-oriented patient record for the primary care team.

    Science.gov (United States)

    Linnarsson, R; Nordgren, K

    1995-01-01

    1. INTRODUCTION. A computer-based patient record (CPR) system, Swedestar, has been developed for use in primary health care. The principal aim of the system is to support continuous quality improvement through improved information handling, improved decision-making, and improved procedures for quality assurance. The Swedestar system has evolved during a ten-year period beginning in 1984. 2. SYSTEM DESIGN. The design philosophy is based on the following key factors: a shared, problem-oriented patient record; structured data entry based on an extensive controlled vocabulary; advanced search and query functions, where the query language has the most important role; integrated decision support for drug prescribing and care protocols and guidelines; integrated procedures for quality assurance. 3. A SHARED PROBLEM-ORIENTED PATIENT RECORD. The core of the CPR system is the problem-oriented patient record. All problems of one patient, recorded by different members of the care team, are displayed on the problem list. Starting from this list, a problem follow-up can be made, one problem at a time or for several problems simultaneously. Thus, it is possible to get an integrated view, across provider categories, of those problems of one patient that belong together. This shared problem-oriented patient record provides an important basis for the primary care team work. 4. INTEGRATED DECISION SUPPORT. The decision support of the system includes a drug prescribing module and a care protocol module. The drug prescribing module is integrated with the patient records and includes an on-line check of the patient's medication list for potential interactions and data-driven reminders concerning major drug problems. Care protocols have been developed for the most common chronic diseases, such as asthma, diabetes, and hypertension. The patient records can be automatically checked according to the care protocols. 5. PRACTICAL EXPERIENCE. The Swedestar system has been implemented in a

  11. Improving self-regulated learning junior high school students through computer-based learning

    Science.gov (United States)

    Nurjanah; Dahlan, J. A.

    2018-05-01

    This study is back grounded by the importance of self-regulated learning as an affective aspect that determines the success of students in learning mathematics. The purpose of this research is to see how the improvement of junior high school students' self-regulated learning through computer based learning is reviewed in whole and school level. This research used a quasi-experimental research method. This is because individual sample subjects are not randomly selected. The research design used is Pretest-and-Posttest Control Group Design. Subjects in this study were students of grade VIII junior high school in Bandung taken from high school (A) and middle school (B). The results of this study showed that the increase of the students' self-regulated learning who obtain learning with computer-based learning is higher than students who obtain conventional learning. School-level factors have a significant effect on increasing of the students' self-regulated learning.

  12. Pain Assessment and Management in Nursing Education Using Computer-based Simulations.

    Science.gov (United States)

    Romero-Hall, Enilda

    2015-08-01

    It is very important for nurses to have a clear understanding of the patient's pain experience and of management strategies. However, a review of the nursing literature shows that one of the main barriers to proper pain management practice is lack of knowledge. Nursing schools are in a unique position to address the gap in pain management knowledge by facilitating the acquisition and use of knowledge by the next generation of nurses. The purpose of this article is to discuss the role of computer-based simulations as a reliable educational technology strategy that can enhance the learning experience of nursing students acquiring pain management knowledge and practice. Computer-based simulations provide a significant number of learning affordances that can help change nursing students' attitudes and behaviors toward and practice of pain assessment and management. Copyright © 2015 American Society for Pain Management Nursing. Published by Elsevier Inc. All rights reserved.

  13. The importance of inter-modal transport system in Nigeria with ...

    African Journals Online (AJOL)

    The importance of inter-modal transport system in Nigeria with reference to the Asaba-Onitsha transport corridor since the pre-colonial period. ... EMAIL FULL TEXT EMAIL FULL TEXT · DOWNLOAD FULL TEXT DOWNLOAD FULL TEXT.

  14. Importance measures and genetic algorithms for designing a risk-informed optimally balanced system

    International Nuclear Information System (INIS)

    Zio, Enrico; Podofillini, Luca

    2007-01-01

    This paper deals with the use of importance measures for the risk-informed optimization of system design and management. An optimization approach is presented in which the information provided by the importance measures is incorporated in the formulation of a multi-objective optimization problem to drive the design towards a solution which, besides being optimal from the points of view of economics and safety, is also 'balanced' in the sense that all components have similar importance values. The approach allows identifying design systems without bottlenecks or unnecessarily high-performing components and with test/maintenance activities calibrated according to the components' importance ranking. The approach is tested at first against a multi-state system design optimization problem in which off-the-shelf components have to be properly allocated. Then, the more realistic problem of risk-informed optimization of the technical specifications of a safety system of a nuclear power plant is addressed

  15. Adaptive importance sampling for probabilistic validation of advanced driver assistance systems

    NARCIS (Netherlands)

    Gietelink, O.J.; Schutter, B. de; Verhaegen, M.

    2006-01-01

    We present an approach for validation of advanced driver assistance systems, based on randomized algorithms. The new method consists of an iterative randomized simulation using adaptive importance sampling. The randomized algorithm is more efficient than conventional simulation techniques. The

  16. Lithuanian requirements for ageing management of systems and components important to safety of nuclear power plant

    International Nuclear Information System (INIS)

    Ramanauskiene, A.

    2000-01-01

    In this paper the Lithuanian requirements for ageing management of systems and components important to safety of Ignalina nuclear power plant (two RBMK-1500 water-cooled graphite moderated channel-type power reactors) are presented

  17. Computer-Based Simulation Games in Public Administration Education

    OpenAIRE

    Kutergina Evgeniia

    2017-01-01

    Computer simulation, an active learning technique, is now one of the advanced pedagogical technologies. Th e use of simulation games in the educational process allows students to gain a firsthand understanding of the processes of real life. Public- administration, public-policy and political-science courses increasingly adopt simulation games in universities worldwide. Besides person-to-person simulation games, there are computer-based simulations in public-administration education. Currently...

  18. Solid-State Quantum Computer Based on Scanning Tunneling Microscopy

    Energy Technology Data Exchange (ETDEWEB)

    Berman, G. P.; Brown, G. W.; Hawley, M. E.; Tsifrinovich, V. I.

    2001-08-27

    We propose a solid-state nuclear-spin quantum computer based on application of scanning tunneling microscopy (STM) and well-developed silicon technology. It requires the measurement of tunneling-current modulation caused by the Larmor precession of a single electron spin. Our envisioned STM quantum computer would operate at the high magnetic field ({approx}10 T) and at low temperature {approx}1 K .

  19. Solid-State Quantum Computer Based on Scanning Tunneling Microscopy

    International Nuclear Information System (INIS)

    Berman, G. P.; Brown, G. W.; Hawley, M. E.; Tsifrinovich, V. I.

    2001-01-01

    We propose a solid-state nuclear-spin quantum computer based on application of scanning tunneling microscopy (STM) and well-developed silicon technology. It requires the measurement of tunneling-current modulation caused by the Larmor precession of a single electron spin. Our envisioned STM quantum computer would operate at the high magnetic field (∼10 T) and at low temperature ∼1 K

  20. Standardized computer-based organized reporting of EEG

    DEFF Research Database (Denmark)

    Beniczky, Sándor; Aurlien, Harald; Brøgger, Jan C.

    2017-01-01

    Standardized terminology for computer-based assessment and reporting of EEG has been previously developed in Europe. The International Federation of Clinical Neurophysiology established a taskforce in 2013 to develop this further, and to reach international consensus. This work resulted in the se......Standardized terminology for computer-based assessment and reporting of EEG has been previously developed in Europe. The International Federation of Clinical Neurophysiology established a taskforce in 2013 to develop this further, and to reach international consensus. This work resulted...... in the second, revised version of SCORE (Standardized Computer-based Organized Reporting of EEG), which is presented in this paper. The revised terminology was implemented in a software package (SCORE EEG), which was tested in clinical practice on 12,160 EEG recordings. Standardized terms implemented in SCORE...... are used to report the features of clinical relevance, extracted while assessing the EEGs. Selection of the terms is context sensitive: initial choices determine the subsequently presented sets of additional choices. This process automatically generates a report and feeds these features into a database...

  1. Standardized computer-based organized reporting of EEG

    DEFF Research Database (Denmark)

    Beniczky, Sándor; Aurlien, Harald; Brøgger, Jan C.

    2017-01-01

    Standardized terminology for computer-based assessment and reporting of EEG has been previously developed in Europe. The International Federation of Clinical Neurophysiology established a taskforce in 2013 to develop this further, and to reach international consensus. This work resulted in the se......Standardized terminology for computer-based assessment and reporting of EEG has been previously developed in Europe. The International Federation of Clinical Neurophysiology established a taskforce in 2013 to develop this further, and to reach international consensus. This work resulted...... in the second, revised version of SCORE (Standardized Computer-based Organized Reporting of EEG), which is presented in this paper. The revised terminology was implemented in a software package (SCORE EEG), which was tested in clinical practice on 12,160 EEG recordings. Standardized terms implemented in SCORE....... In the end, the diagnostic significance is scored, using a standardized list of terms. SCORE has specific modules for scoring seizures (including seizure semiology and ictal EEG patterns), neonatal recordings (including features specific for this age group), and for Critical Care EEG Terminology. SCORE...

  2. Using computer-based training to facilitate radiation protection review

    International Nuclear Information System (INIS)

    Abercrombie, J.S.; Copenhaver, E.D.

    1989-01-01

    In a national laboratory setting, it is necessary to provide radiation protection overview and training to diverse parts of the laboratory population. This includes employees at research reactors, accelerators, waste facilities, radiochemical isotope processing, and analytical laboratories, among others. In addition, our own radiation protection and monitoring staffs must be trained. To assist in the implementation of this full range of training, ORNL has purchased prepackaged computer-based training in health physics and technical mathematics with training modules that can be selected from many topics. By selection of specific modules, appropriate radiation protection review packages can be determined to meet many individual program needs. Because our radiation protection personnel must have some previous radiation protection experience or the equivalent of an associate's degree in radiation protection for entry level, the computer-based training will serve primarily as review of major principles. Others may need very specific prior training to make the computer-based training effective in their work situations. 4 refs

  3. Capital Buffers Based on Banks’ Domestic Systemic Importance:Selected Issues

    OpenAIRE

    Skořepa, Michal; Seidler, Jakub

    2014-01-01

    Regulators in many countries are currently considering ways to impose domestic systemic importance-based capital requirements on banks. Aiming to assist these considerations, this article discusses a number of issues concerning the calculation of a bank’s systemic importance to the domestic banking sector, such as the choice of indicators used and the pros and cons of focusing on an individual or consolidated level. Also, the “equal expected impact” procedure for determining adequate addition...

  4. Methodology for identifying boundaries of systems important to safety in CANDU nuclear power plants

    International Nuclear Information System (INIS)

    Therrien, S.; Komljenovic, D.; Therrien, P.; Ruest, C.; Prevost, P.; Vaillancourt, R.

    2007-01-01

    This paper presents a methodology developed to identify the boundaries of the systems important to safety (SIS) at the Gentilly-2 Nuclear Power Plant (NPP), Hydro-Quebec. The SIS boundaries identification considers nuclear safety only. Components that are not identified as important to safety are systematically identified as related to safety. A global assessment process such as WANO/INPO AP-913 'Equipment Reliability Process' will be needed to implement adequate changes in the management rules of those components. The paper depicts results in applying the methodology to the Shutdown Systems 1 and 2 (SDS 1, 2), and to the Emergency Core Cooling System (ECCS). This validation process enabled fine tuning the methodology, performing a better estimate of the effort required to evaluate a system, and identifying components important to safety of these systems. (author)

  5. Evaluation of computer-based NDE techniques and regional support of inspection activities

    International Nuclear Information System (INIS)

    Taylor, T.T.; Kurtz, R.J.; Heasler, P.G.; Doctor, S.R.

    1991-01-01

    This paper describes the technical progress during fiscal year 1990 for the program entitled 'Evaluation of Computer-Based nondestructive evaluation (NDE) Techniques and Regional Support of Inspection Activities.' Highlights of the technical progress include: development of a seminar to provide basic knowledge required to review and evaluate computer-based systems; review of a typical computer-based field procedure to determine compliance with applicable codes, ambiguities in procedure guidance, and overall effectiveness and utility; design and fabrication of a series of three test blocks for NRC staff use for training or audit of UT systems; technical assistance in reviewing (1) San Onofre ten year reactor pressure vessel inservice inspection activities and (2) the capability of a proposed phased array inspection of the feedwater nozzle at Oyster Creek; completion of design calculations to determine the feasibility and significance of various sizes of mockup assemblies that could be used to evaluate the effectiveness of eddy current examinations performed on steam generators; and discussion of initial mockup design features and methods for fabricating flaws in steam generator tubes

  6. The soft computing-based approach to investigate allergic diseases: a systematic review.

    Science.gov (United States)

    Tartarisco, Gennaro; Tonacci, Alessandro; Minciullo, Paola Lucia; Billeci, Lucia; Pioggia, Giovanni; Incorvaia, Cristoforo; Gangemi, Sebastiano

    2017-01-01

    Early recognition of inflammatory markers and their relation to asthma, adverse drug reactions, allergic rhinitis, atopic dermatitis and other allergic diseases is an important goal in allergy. The vast majority of studies in the literature are based on classic statistical methods; however, developments in computational techniques such as soft computing-based approaches hold new promise in this field. The aim of this manuscript is to systematically review the main soft computing-based techniques such as artificial neural networks, support vector machines, bayesian networks and fuzzy logic to investigate their performances in the field of allergic diseases. The review was conducted following PRISMA guidelines and the protocol was registered within PROSPERO database (CRD42016038894). The research was performed on PubMed and ScienceDirect, covering the period starting from September 1, 1990 through April 19, 2016. The review included 27 studies related to allergic diseases and soft computing performances. We observed promising results with an overall accuracy of 86.5%, mainly focused on asthmatic disease. The review reveals that soft computing-based approaches are suitable for big data analysis and can be very powerful, especially when dealing with uncertainty and poorly characterized parameters. Furthermore, they can provide valuable support in case of lack of data and entangled cause-effect relationships, which make it difficult to assess the evolution of disease. Although most works deal with asthma, we believe the soft computing approach could be a real breakthrough and foster new insights into other allergic diseases as well.

  7. The reactor core configuration and important systems related to physics tests of Daya Bay NPP

    International Nuclear Information System (INIS)

    Tao Shaoping

    1995-06-01

    A brief introduction to reactor core configuration and important systems related to physics tests of Daya Bay NPP is given. These systems involve the reactor core system (COR), the full length rod control system (RGL), the in-core instrumentation system (RIC), the out-of-core nuclear instrumentation system (RPN), and the LOCA surveillance system (LSS), the centralized data processing system (KIT) and the test data acquisition system (KDO). In addition, that the adjustment and evaluation of boron concentration related to other systems, for example the reactor coolant system (RCP), the chemical and volume control system (RCV), the reactor boron and water makeup system (REA), the nuclear sampling system (REN) and the reactor control system (RRC), etc. is also described. Analysis of these systems helps not only to familiarize their functions and acquires a deepen understanding for the principle procedure, points for attention and technical key of the core physics tests, but also to further analyze the test results. (3 refs., 11 figs., 1 tab.)

  8. Systemic Negligence: Why It Is Morally Important for Developing World Bioethics.

    Science.gov (United States)

    Chakraborti, Chhanda

    2015-12-01

    In the context of clinical and non-clinical biomedical practices, negligence is usually understood as a lapse of a specific professional duty by a healthcare worker or by a medical facility. This paper tries to delineate systemic negligence as another kind of negligence in the context of health systems, particularly in developing countries, that needs to be recognized and addressed. Systemic negligence is not just a mere collection of stray incidences of medical errors and system failures in a health system, but is proposed in this paper as a more pervasive kind of neglect. Several non-medical factors, such as lack of social and political will, also contribute to it and hence is more difficult to address in a health system. This paper argues that recognizing systemic negligence and including it research agenda have special moral importance for researchers in developing world bioethics, public health ethics and for health activists in the developing world. For, it can be a potent health system barrier, and can seriously impair efforts to ensure patient safety, particularly in the weaker health systems. As it erodes accountability in a health system, addressing it is also important for the twin goals of ensuring patient safety and improving health system performance. Above all, it needs to be addressed because the tolerance of its persistence in a health system seems to undervalue health as a social good. © 2014 John Wiley & Sons Ltd.

  9. IMPORTANCE, Minimal Cut Sets and System Availability from Fault Tree Analysis

    International Nuclear Information System (INIS)

    Lambert, H. W.

    1987-01-01

    1 - Description of problem or function: IMPORTANCE computes various measures of probabilistic importance of basic events and minimal cut sets to a fault tree or reliability network diagram. The minimal cut sets, the failure rates and the fault duration times (i.e., the repair times) of all basic events contained in the minimal cut sets are supplied as input data. The failure and repair distributions are assumed to be exponential. IMPORTANCE, a quantitative evaluation code, then determines the probability of the top event and computes the importance of minimal cut sets and basic events by a numerical ranking. Two measures are computed. The first describes system behavior at one point in time; the second describes sequences of failures that cause the system to fail in time. All measures are computed assuming statistical independence of basic events. In addition, system unavailability and expected number of system failures are computed by the code. 2 - Method of solution: Seven measures of basic event importance and two measures of cut set importance can be computed. Birnbaum's measure of importance (i.e., the partial derivative) and the probability of the top event are computed using the min cut upper bound. If there are no replicated events in the minimal cut sets, then the min cut upper bound is exact. If basic events are replicated in the minimal cut sets, then based on experience the min cut upper bound is accurate if the probability of the top event is less than 0.1. Simpson's rule is used in computing the time-integrated measures of importance. Newton's method for approximating the roots of an equation is employed in the options where the importance measures are computed as a function of the probability of the top event, and a shell sort puts the output in descending order of importance

  10. Improving the learning of clinical reasoning through computer-based cognitive representation.

    Science.gov (United States)

    Wu, Bian; Wang, Minhong; Johnson, Janice M; Grotzer, Tina A

    2014-01-01

    Clinical reasoning is usually taught using a problem-solving approach, which is widely adopted in medical education. However, learning through problem solving is difficult as a result of the contextualization and dynamic aspects of actual problems. Moreover, knowledge acquired from problem-solving practice tends to be inert and fragmented. This study proposed a computer-based cognitive representation approach that externalizes and facilitates the complex processes in learning clinical reasoning. The approach is operationalized in a computer-based cognitive representation tool that involves argument mapping to externalize the problem-solving process and concept mapping to reveal the knowledge constructed from the problems. Twenty-nine Year 3 or higher students from a medical school in east China participated in the study. Participants used the proposed approach implemented in an e-learning system to complete four learning cases in 4 weeks on an individual basis. For each case, students interacted with the problem to capture critical data, generate and justify hypotheses, make a diagnosis, recall relevant knowledge, and update their conceptual understanding of the problem domain. Meanwhile, students used the computer-based cognitive representation tool to articulate and represent the key elements and their interactions in the learning process. A significant improvement was found in students' learning products from the beginning to the end of the study, consistent with students' report of close-to-moderate progress in developing problem-solving and knowledge-construction abilities. No significant differences were found between the pretest and posttest scores with the 4-week period. The cognitive representation approach was found to provide more formative assessment. The computer-based cognitive representation approach improved the learning of clinical reasoning in both problem solving and knowledge construction.

  11. Improving the learning of clinical reasoning through computer-based cognitive representation

    Directory of Open Access Journals (Sweden)

    Bian Wu

    2014-12-01

    Full Text Available Objective: Clinical reasoning is usually taught using a problem-solving approach, which is widely adopted in medical education. However, learning through problem solving is difficult as a result of the contextualization and dynamic aspects of actual problems. Moreover, knowledge acquired from problem-solving practice tends to be inert and fragmented. This study proposed a computer-based cognitive representation approach that externalizes and facilitates the complex processes in learning clinical reasoning. The approach is operationalized in a computer-based cognitive representation tool that involves argument mapping to externalize the problem-solving process and concept mapping to reveal the knowledge constructed from the problems. Methods: Twenty-nine Year 3 or higher students from a medical school in east China participated in the study. Participants used the proposed approach implemented in an e-learning system to complete four learning cases in 4 weeks on an individual basis. For each case, students interacted with the problem to capture critical data, generate and justify hypotheses, make a diagnosis, recall relevant knowledge, and update their conceptual understanding of the problem domain. Meanwhile, students used the computer-based cognitive representation tool to articulate and represent the key elements and their interactions in the learning process. Results: A significant improvement was found in students’ learning products from the beginning to the end of the study, consistent with students’ report of close-to-moderate progress in developing problem-solving and knowledge-construction abilities. No significant differences were found between the pretest and posttest scores with the 4-week period. The cognitive representation approach was found to provide more formative assessment. Conclusions: The computer-based cognitive representation approach improved the learning of clinical reasoning in both problem solving and knowledge

  12. Measurement of fuel importance distribution in non-uniformly distributed fuel systems

    International Nuclear Information System (INIS)

    Yamane, Yoshihiro; Hirano, Yasushi; Yasui, Hazime; Izima, Kazunori; Shiroya, Seiji; Kobayashi, Keiji.

    1995-01-01

    A reactivity effect due to a spatial variation of nuclear fuel concentration is an important problem for nuclear criticality safety in a reprocessing plant. As a theory estimating this reactivity effect, the Goertzel and fuel importance theories are well known. It has been shown that the Goertzel's theory is valid in the range of our experiments based on measurements of reactivity effect and thermal neutron flux in non-uniformly distributed fuel systems. On the other hand, there have been no reports concerning systematic experimental studies on the flatness of fuel importance which is a more general index than the Goertzel's theory. It is derived from the perturbation theory that the fuel importance is proportional to the reactivity change resulting from a change of small amount of fuel mass. Using a uniform and three kinds of nonuniform fuel systems consisting of 93.2% enriched uranium plates and polyethylene plates, the fuel importance distributions were measured. As a result, it was found experimentally that the fuel importance distribution became flat, as its reactivity effect became large. Therefore it was concluded that the flatness of fuel importance distribution is the useful index for estimating reactivity effect of non-uniformly distributed fuel system. (author)

  13. Use of theory in computer-based interventions to reduce alcohol use among adolescents and young adults: a systematic review.

    Science.gov (United States)

    Tebb, Kathleen P; Erenrich, Rebecca K; Jasik, Carolyn Bradner; Berna, Mark S; Lester, James C; Ozer, Elizabeth M

    2016-06-17

    Alcohol use and binge drinking among adolescents and young adults remain frequent causes of preventable injuries, disease, and death, and there has been growing attention to computer-based modes of intervention delivery to prevent/reduce alcohol use. Research suggests that health interventions grounded in established theory are more effective than those with no theoretical basis. The goal of this study was to conduct a literature review of computer-based interventions (CBIs) designed to address alcohol use among adolescents and young adults (aged 12-21 years) and examine the extent to which CBIs use theories of behavior change in their development and evaluations. This study also provides an update on extant CBIs addressing alcohol use among youth and their effectiveness. Between November and December of 2014, a literature review of CBIs aimed at preventing or reducing alcohol in PsychINFO, PubMed, and Google Scholar was conducted. The use of theory in each CBI was examined using a modified version of the classification system developed by Painter et al. (Ann Behav Med 35:358-362, 2008). The search yielded 600 unique articles, 500 were excluded because they did not meet the inclusion criteria. The 100 remaining articles were retained for analyses. Many articles were written about a single intervention; thus, the search revealed a total of 42 unique CBIs. In examining the use of theory, 22 CBIs (52 %) explicitly named one or more theoretical frameworks. Primary theories mentioned were social cognitive theory, transtheoretical model, theory of planned behavior and reasoned action, and health belief model. Less than half (48 %), did not use theory, but mentioned either use of a theoretical construct (such as self-efficacy) or an intervention technique (e.g., manipulating social norms). Only a few articles provided detailed information about how the theory was applied to the CBI; the vast majority included little to no information. Given the importance of theory in

  14. Use of theory in computer-based interventions to reduce alcohol use among adolescents and young adults: a systematic review

    Directory of Open Access Journals (Sweden)

    Kathleen P. Tebb

    2016-06-01

    to no information. Conclusions Given the importance of theory in guiding interventions, greater emphasis on the selection and application of theory is needed. The classification system used in this review offers a guiding framework for reporting how theory based principles can be applied to computer based interventions.

  15. Calculation of parameter failure probability of thermodynamic system by response surface and importance sampling method

    International Nuclear Information System (INIS)

    Shang Yanlong; Cai Qi; Chen Lisheng; Zhang Yangwei

    2012-01-01

    In this paper, the combined method of response surface and importance sampling was applied for calculation of parameter failure probability of the thermodynamic system. The mathematics model was present for the parameter failure of physics process in the thermodynamic system, by which the combination arithmetic model of response surface and importance sampling was established, then the performance degradation model of the components and the simulation process of parameter failure in the physics process of thermodynamic system were also present. The parameter failure probability of the purification water system in nuclear reactor was obtained by the combination method. The results show that the combination method is an effective method for the calculation of the parameter failure probability of the thermodynamic system with high dimensionality and non-linear characteristics, because of the satisfactory precision with less computing time than the direct sampling method and the drawbacks of response surface method. (authors)

  16. Reliability importance analysis of Markovian systems at steady state using perturbation analysis

    Energy Technology Data Exchange (ETDEWEB)

    Phuc Do Van [Institut Charles Delaunay - FRE CNRS 2848, Systems Modeling and Dependability Group, Universite de technologie de Troyes, 12, rue Marie Curie, BP 2060-10010 Troyes cedex (France); Barros, Anne [Institut Charles Delaunay - FRE CNRS 2848, Systems Modeling and Dependability Group, Universite de technologie de Troyes, 12, rue Marie Curie, BP 2060-10010 Troyes cedex (France)], E-mail: anne.barros@utt.fr; Berenguer, Christophe [Institut Charles Delaunay - FRE CNRS 2848, Systems Modeling and Dependability Group, Universite de technologie de Troyes, 12, rue Marie Curie, BP 2060-10010 Troyes cedex (France)

    2008-11-15

    Sensitivity analysis has been primarily defined for static systems, i.e. systems described by combinatorial reliability models (fault or event trees). Several structural and probabilistic measures have been proposed to assess the components importance. For dynamic systems including inter-component and functional dependencies (cold spare, shared load, shared resources, etc.), and described by Markov models or, more generally, by discrete events dynamic systems models, the problem of sensitivity analysis remains widely open. In this paper, the perturbation method is used to estimate an importance factor, called multi-directional sensitivity measure, in the framework of Markovian systems. Some numerical examples are introduced to show why this method offers a promising tool for steady-state sensitivity analysis of Markov processes in reliability studies.

  17. Reliability importance analysis of Markovian systems at steady state using perturbation analysis

    International Nuclear Information System (INIS)

    Phuc Do Van; Barros, Anne; Berenguer, Christophe

    2008-01-01

    Sensitivity analysis has been primarily defined for static systems, i.e. systems described by combinatorial reliability models (fault or event trees). Several structural and probabilistic measures have been proposed to assess the components importance. For dynamic systems including inter-component and functional dependencies (cold spare, shared load, shared resources, etc.), and described by Markov models or, more generally, by discrete events dynamic systems models, the problem of sensitivity analysis remains widely open. In this paper, the perturbation method is used to estimate an importance factor, called multi-directional sensitivity measure, in the framework of Markovian systems. Some numerical examples are introduced to show why this method offers a promising tool for steady-state sensitivity analysis of Markov processes in reliability studies

  18. MICADO The data import engine of the CERN engineering and equipment data management system

    CERN Document Server

    Widegren, David; Lyzwa, R; Mallon Amerigo, S; Petit, S; Rousseau, B

    2008-01-01

    The CERN Engineering and Equipment Data Management System (EDMS) is one of the largest and most complex data management systems of its kind. For the last 10 years, it has received huge quantities of data generated in the different LHC project phases. Capturing all this information would not have been possible without a robust, failsafe, yet flexible and user-friendly data import engine. For this purpose the Micado toolkit was developed at CERN using XML standards, providing multi-level data verifications, an advanced queuing mechanism and batch processing of large amounts of import requests. Whereas Micado originally was developed to facilitate the capturing of LHC manufacturing data, its modular architecture has allowed a cost-effective extension to also cater for the LHC installation and hardware commissioning data import processes. Recently Micado has broadened its scope even further, including also imports of safety inspections, and at the same time the next generation of the tool providing Web Services i...

  19. Quantum computing based on space states without charge transfer

    International Nuclear Information System (INIS)

    Vyurkov, V.; Filippov, S.; Gorelik, L.

    2010-01-01

    An implementation of a quantum computer based on space states in double quantum dots is discussed. There is no charge transfer in qubits during a calculation, therefore, uncontrolled entanglement between qubits due to long-range Coulomb interaction is suppressed. Encoding and processing of quantum information is merely performed on symmetric and antisymmetric states of the electron in double quantum dots. Other plausible sources of decoherence caused by interaction with phonons and gates could be substantially suppressed in the structure as well. We also demonstrate how all necessary quantum logic operations, initialization, writing, and read-out could be carried out in the computer.

  20. Nanophotonic quantum computer based on atomic quantum transistor

    International Nuclear Information System (INIS)

    Andrianov, S N; Moiseev, S A

    2015-01-01

    We propose a scheme of a quantum computer based on nanophotonic elements: two buses in the form of nanowaveguide resonators, two nanosized units of multiatom multiqubit quantum memory and a set of nanoprocessors in the form of photonic quantum transistors, each containing a pair of nanowaveguide ring resonators coupled via a quantum dot. The operation modes of nanoprocessor photonic quantum transistors are theoretically studied and the execution of main logical operations by means of them is demonstrated. We also discuss the prospects of the proposed nanophotonic quantum computer for operating in high-speed optical fibre networks. (quantum computations)

  1. Cost-effectiveness analysis of computer-based assessment

    Directory of Open Access Journals (Sweden)

    Pauline Loewenberger

    2003-12-01

    Full Text Available The need for more cost-effective and pedagogically acceptable combinations of teaching and learning methods to sustain increasing student numbers means that the use of innovative methods, using technology, is accelerating. There is an expectation that economies of scale might provide greater cost-effectiveness whilst also enhancing student learning. The difficulties and complexities of these expectations are considered in this paper, which explores the challenges faced by those wishing to evaluate the costeffectiveness of computer-based assessment (CBA. The paper outlines the outcomes of a survey which attempted to gather information about the costs and benefits of CBA.

  2. Nanophotonic quantum computer based on atomic quantum transistor

    Energy Technology Data Exchange (ETDEWEB)

    Andrianov, S N [Institute of Advanced Research, Academy of Sciences of the Republic of Tatarstan, Kazan (Russian Federation); Moiseev, S A [Kazan E. K. Zavoisky Physical-Technical Institute, Kazan Scientific Center, Russian Academy of Sciences, Kazan (Russian Federation)

    2015-10-31

    We propose a scheme of a quantum computer based on nanophotonic elements: two buses in the form of nanowaveguide resonators, two nanosized units of multiatom multiqubit quantum memory and a set of nanoprocessors in the form of photonic quantum transistors, each containing a pair of nanowaveguide ring resonators coupled via a quantum dot. The operation modes of nanoprocessor photonic quantum transistors are theoretically studied and the execution of main logical operations by means of them is demonstrated. We also discuss the prospects of the proposed nanophotonic quantum computer for operating in high-speed optical fibre networks. (quantum computations)

  3. Estimation of functional failure probability of passive systems based on adaptive importance sampling method

    International Nuclear Information System (INIS)

    Wang Baosheng; Wang Dongqing; Zhang Jianmin; Jiang Jing

    2012-01-01

    In order to estimate the functional failure probability of passive systems, an innovative adaptive importance sampling methodology is presented. In the proposed methodology, information of variables is extracted with some pre-sampling of points in the failure region. An important sampling density is then constructed from the sample distribution in the failure region. Taking the AP1000 passive residual heat removal system as an example, the uncertainties related to the model of a passive system and the numerical values of its input parameters are considered in this paper. And then the probability of functional failure is estimated with the combination of the response surface method and adaptive importance sampling method. The numerical results demonstrate the high computed efficiency and excellent computed accuracy of the methodology compared with traditional probability analysis methods. (authors)

  4. On the Boolean extension of the Birnbaum importance to non-coherent systems

    International Nuclear Information System (INIS)

    Aliee, Hananeh; Borgonovo, Emanuele; Glaß, Michael; Teich, Jürgen

    2017-01-01

    The Birnbaum importance measure plays a central role in reliability analysis. It has initially been introduced for coherent systems, where several of its properties hold and where its computation is straightforward. This work introduces a Boolean expression for the notion of criticality that allows the seamless extension of the Birnbaum importance to non-coherent systems. As a key feature, the novel definition makes the computation and encoding straightforward with well-established techniques such as Binary Decision Diagrams (BDDs) or Fault Trees (FTs). Several examples and a case study illustrate the findings. - Highlights: • We propose a Boolean expression for the notion of criticality in coherent and non-coherent systems. • The notion is connected with the Birnbaum importance measure. • The connection with Andrew's and Beeson extension is discussed. • The Boolean expression allows straightforward encoding in Binary Decision Diagrams.

  5. The Goal Specificity Effect on Strategy Use and Instructional Efficiency during Computer-Based Scientific Discovery Learning

    Science.gov (United States)

    Kunsting, Josef; Wirth, Joachim; Paas, Fred

    2011-01-01

    Using a computer-based scientific discovery learning environment on buoyancy in fluids we investigated the "effects of goal specificity" (nonspecific goals vs. specific goals) for two goal types (problem solving goals vs. learning goals) on "strategy use" and "instructional efficiency". Our empirical findings close an important research gap,…

  6. Evaluation of Importance of Source Neutrons in Accelerator-Driven System

    International Nuclear Information System (INIS)

    Kim, Yong Hee; Park, Won Seok

    2002-01-01

    An importance function of the external spallation neutrons in ADS (Accelerator-Driven System) is defined to characterize the source multiplication in subcritical blanket. For a model ADS problem, the source importance function is evaluated with the TRANSX/TWODANT code system. In order to assess the impact of the power distribution on the importance function, both homogeneous and heterogeneous cores are analyzed and corresponding source multiplications are compared. Also, based on the source importance function, an optimization of the shape of the proton current is performed from the source multiplication point of view. Additionally, the source importance function is compared with the conventional λ-mode adjoint flux, which is used as an importance function of fission neutrons in the critical reactors. Concerning an issue in the ADS design, i.e., difficulty in reducing the fission power unless the proton current is shut off, a study is performed to minimize the source importance, thereby minimizing the fission power, even when the k-eff value of the core is quite high. (authors)

  7. On the relationship between perceived importance of ERP systems selection characteristics and satisfaction with selected ERP systems in these characteristics

    DEFF Research Database (Denmark)

    Sudzina, Frantisek; Pucihar, Andreja; Lenart, Gregor

    2011-01-01

    of the relationship between the two. The paper focuses on the correlation between importance of ERP system selection criteria and the level of satisfaction with the chosen ERP systems in these characteristics. The research hypothesis is that there exists a correlation between the two. The analysis presented...

  8. 78 FR 29392 - Embedded Digital Devices in Safety-Related Systems, Systems Important to Safety, and Items Relied...

    Science.gov (United States)

    2013-05-20

    ... NUCLEAR REGULATORY COMMISSION [NRC-2013-0098] Embedded Digital Devices in Safety-Related Systems, Systems Important to Safety, and Items Relied on for Safety AGENCY: Nuclear Regulatory Commission. ACTION... (NRC) is issuing for public comment Draft Regulatory Issue Summary (RIS) 2013-XX, ``Embedded Digital...

  9. The importance of the renin-angiotensin system in normal cardiovascular homeostasis

    Science.gov (United States)

    Haber, E.

    1975-01-01

    Studies were carried out on adult mongrel dogs (20 to 30 kilograms) to investigate the importance of the renin-angiotensin system. Results indicate that the renin-angiotensin system plays a major role in the maintenance of circulatory homeostasis when extracellular fluid volume is depleted. It was also found that angiotensin II concentration, in addition to renal perfusion pressure, is a factor in the regulation of renin release.

  10. Computerbasiert prüfen [Computer-based Assessment

    Directory of Open Access Journals (Sweden)

    Frey, Peter

    2006-08-01

    Full Text Available [english] Computer-based testing in medical education offers new perspectives. Advantages are sequential or adaptive testing, integration of movies or sound, rapid feedback to candidates and management of web-based question banks. Computer-based testing can also be implemented in an OSCE examination. In e-learning environments formative self-assessment are often implemented and gives helpful feedbacks to learners. Disadvantages in high-stake exams are the high requirements as well for the quality of testing (e.g. standard setting as additionally for the information technology and especially for security. [german] Computerbasierte Prüfungen im Medizinstudium eröffnen neue Möglichkeiten. Vorteile solcher Prüfungen liegen im sequentiellen oder adaptiven Prüfen, in der Integration von Bewegtbildern oder Ton, der raschen Auswertung und zentraler Verwaltung der Prüfungsfragen via Internet. Ein Einsatzgebiet mit vertretbarem Aufwand sind Prüfungen mit mehreren Stationen wie beispielsweise die OSCE-Prüfung. Computerbasierte formative Selbsttests werden im Bereiche e-learning häufig angeboten. Das hilft den Lernenden ihren Wissensstand besser einzuschätzen oder sich mit den Leistungen anderer zu vergleichen. Grenzen zeigen sich bei den summativen Prüfungen beim Prüfungsort, da zuhause Betrug möglich ist. Höhere ärztliche Kompetenzen wie Untersuchungstechnik oder Kommunikation eigenen sich kaum für rechnergestützte Prüfungen.

  11. Classification of transportation packaging and dry spent fuel storage system components according to importance to safety

    International Nuclear Information System (INIS)

    Tyacke, M.J.; McConnell, J.W. Jr.; Ayers, A.L. Jr.; O'Connor, S.C.; Jankovich, J.P.

    1996-01-01

    The Idaho National Engineering Laboratory prepared a technical report for the Office of Nuclear Material Safety and Safeguards of the US Nuclear Regulatory Commission, entitled Classification of Transportation Packaging and Dry Spent Fuel Storage System Components According to Importance to Safety, NUREG/CR-6407. This paper provides the results of that report. It also presents the graded approach for classification of components used in transportation packagings and dry spent fuel storage systems. This approach provides a method for identifying the classification of components according to importance to safety within transportation packagings and dry spent fuel storage systems. Record retention requirements are discussed to identify the documentation necessary to validate that the individual components were fabricated in accordance with their assigned classification. A review of the existing regulations pertaining to transportation packagings and dry storage systems was performed to identify current requirements. The general types of transportation packagings and dry storage systems are identified. The methodology used in this paper is based on Regulatory Guide 7.10, Establishing Quality Assurance Programs for Packaging Used in the Transport of Radioactive Material. This paper also includes a list of generic components for each of the general types of transportation packagings and spent fuel storage systems, with a classification category assigned to each component. Several examples concerning the safety importance of components are presented

  12. The importance of gender analysis in research for health systems strengthening.

    Science.gov (United States)

    Theobald, Sally; Morgan, Rosemary; Hawkins, Kate; Ssali, Sarah; George, Asha; Molyneux, Sassy

    2017-12-01

    This editorial discusses a collection of papers examining gender across a range of health policy and systems contexts, from access to services, governance, health financing, and human resources for health. The papers interrogate differing health issues and core health systems functions using a gender lens. Together they produce new knowledge on the multiple impacts of gender on health experiences and demonstrate the importance of gender analyses and gender sensitive interventions for promoting well-being and health systems strengthening. The findings from these papers collectively show how gender intersects with other axes of inequity within specific contexts to shape experiences of health and health seeking within households, communities and health systems; illustrate how gender power relations affect access to important resources; and demonstrate that gender norms, poverty and patriarchy interplay to limit women's choices and chances both within household interactions and within the health sector. Health systems researchers have a responsibility to promote the incorporation of gender analyses into their studies in order to inform more strategic, effective and equitable health systems interventions, programmes, and policies. Responding to gender inequitable systems, institutions, and services in this sector requires an 'all hands-on deck' approach. We cannot claim to take a 'people-centred approach' to health systems if the status quo continues. © The Author 2017. Published by Oxford University Press in association with The London School of Hygiene and Tropical Medicine.

  13. Role of computer-based learning in tooth carving in dentistry: An Indian perspective.

    Science.gov (United States)

    Juneja, Saurabh; Juneja, Manjushree

    2016-01-01

    Tooth carving is an important practical preclinical exercise in the curriculum in Indian dental education setup. It forms the basis of introduction to tooth anatomy, morphology and occlusion of primary and permanent teeth through practical approach. It requires enormous time and manpower to master the skill. Therefore, there is an imminent necessity to incorporate computer-based learning of the art of tooth carving for effective teaching and efficient student learning. This will ensure quality time to be spent on other academic and research activities by students and faculty in addition to adding value as a teaching aid.

  14. Effects of retrospective quality control on pressure-flow data with computer-based urodynamic systems from men with benign prostatic hyperplasia%对良性前列腺增生患者计算机化尿动力仪获取的压力-流率测定数据的回顾性质量控制及效果

    Institute of Scientific and Technical Information of China (English)

    L. M. Liao; W. Schaefer

    2007-01-01

    Aim: To evaluate the effects of retrospective quality control on pressure-flow data with computer-based urodynamic systems from men with benign prostatic hyperplasia (BPH). Methods: A total of 582 traces of pressure-flow study from 181 men with BPH was included in the study. For each trace, maximum urinary flow rate (Qmax) and detrusor pressure at Qmax (pdet.Qmax) were, respectively, read from manually smoothed and corrected uroflow and detrusor pressure curves from the computer print-outs. Obstruction coefficient, International Continence Society (ICS) and Schaefer nomograms were used to detect urethral resistance and to diagnose obstruction. The results obtained by manual reading were compared with those from computer-based systems. Results: After manual correction,Qmax underwent a consistently significant decrease by 1.2 mL/s on average (P < 0.001), and had a change range of 0.5-10.4 mL/s. However, pdet. Qmax underwent inconsistently intra-individual changes after correction. The obstruction coefficient increased significantly, by an average of 0.07 (P < 0.05). Using the ICS nomogram, the percentage of obstruction increased from 69.8% to 73.9%, and of the non-obstruction decreased from 8.8% to 5.3% (P < 0.05).There were 11% of traces that changed the classifications using the ICS nomogram, and 28.9% that changed the grades for the Schaefer nomogram. Conclusion: Systematically significant differences in parameters from pressure-flow study between manual readings and computer recordings were demonstrated. Manual correction resulted in a consistently lower Qmax, a higher urethral resistance, and an aggravating obstruction. Manual readings can correct considerable false diagnoses for obstruction. Retrospective quality control of pressure-flow data with computer-based systems is necessary.%目的:评估良性前列腺增生(BPH)患者计算机化尿动力仪压力-流率测定数据的回顾性质量控制效果.方法:来自181例BPH患者的582次压力-流

  15. A computer-based biomechanical analysis of the three-dimensional motion of cementless hip prostheses.

    Science.gov (United States)

    Gilbert, J L; Bloomfeld, R S; Lautenschlager, E P; Wixson, R L

    1992-04-01

    A computer-based mathematical technique was developed to measure and completely describe the migration and micromotion of a femoral hip prosthesis relative to the femur. This technique utilized the mechanics of rigid-body motion analysis and apparatus of seven linear displacement transducers to measure and describe the complete three-dimensional motion of the prosthesis during cyclic loading. Computer acquisition of the data and custom analysis software allowed one to calculate the magnitude and direction of the motion of any point of interest on the prostheses from information about the motion of two points on the device. The data were also used to replay the tests using a computer animation technique, which allowed a magnified view of the three-dimensional motion of the prosthesis. This paper describes the mathematical development of the rigid-body motion analysis, the experimental method and apparatus for data collection, the technique used to animate the motion, the sources of error and the effect of the assumptions (rigid bodies) on the results. Selected results of individual test runs of uncemented and cemented prostheses are presented to demonstrate the efficacy of the method. The combined effect of the vibration and electrical noise resulted in a resolution of the system of about 3-5 microns motion for each transducer. Deformation effects appear to contribute about 3-15 microns to the measurement error. This measurement and analysis technique is a very sensitive and powerful means of assessing the effects of different design parameters on the migration and micromotion of total joint prostheses and can be applied to any other case (knee, dental implant) where three-dimensional relative motion between two bodies is important.

  16. Seismic margin reviews of nuclear power plants: Identification of important functions and systems

    International Nuclear Information System (INIS)

    Prassinos, P.G.; Moore, D.L.; Amico, P.J.

    1987-01-01

    The results from the review of the seven utility-sponsored seismic PRAs plus the Zion SSMRP have been used to develop some insights regarding the importance of various systems and functions to seismic margins. By taking this information and combining it with the fragility insights we can develop some functional/systemic screening guideline for margin studies. This screening approach will greatly reduce the scope of the analysis. It is possible only to come to conclusions regarding the importance of plant systems and safety functions for PWRs, for which six plants were studied. For PWRs, it is possible to categorize plant safety functions as belonging to one of two groups, one of which is important to the assessment of seismic margins and one of which is not. The important functional group involves only two functions that must be considered for estimating seismic margin. These two functions are shutting down the nuclear reaction and providing cooling to the reactor core in the time period immediately following the seismic event (that is, the injection phase or pre-residual heat removal time period). It is possible to reasonably estimate the seismic margin of the plant by performing a study only involving the analysis of the plant systems and structure which are required in order to perform the two functions. Such analysis must include an assessment of a complete set of seismic initiating events. (orig./HP)

  17. Rules of Normalisation and their Importance for Interpretation of Systems of Optimal Taxation

    DEFF Research Database (Denmark)

    Munk, Knud Jørgen

    representation of the general equilibrium conditions the rules of normalisation in standard optimal tax models. This allows us to provide an intuitive explanation of what determines the optimal tax system. Finally, we review a number of examples where lack of precision with respect to normalisation in otherwise...... important contributions to the literature on optimal taxation has given rise to misinterpretations of of analytical results....

  18. The importance of a Monumentenwacht system. The situation in North Brabant

    NARCIS (Netherlands)

    Hees, R.P.J. van; Naldini, S.; Nijland, T.G.

    2015-01-01

    The question ‘What is the importance of a Monumentenwacht system (monument watch)’ is a very current issue. Do the activities of Monumentenwacht (often abbreviated MW in this report) contribute to better and more cost-effective preservation of our built cultural heritage? In order to answer this

  19. 76 FR 17047 - Authority To Designate Financial Market Utilities as Systemically Important

    Science.gov (United States)

    2011-03-28

    ... functioning is integral to the soundness of the financial system and the overall economy. The importance of... Council to apply a transparent and clear communication strategy surrounding all designation decisions. The..., Better Markets, The Clearing House, Debevoise & Plimpton, The Depository Trust & Clearing Corporation...

  20. Computer-based liquid radioactive waste control with plant emergency and generator temperature monitoring

    International Nuclear Information System (INIS)

    Plotnick, R.J.; Schneider, M.I.; Shaffer, C.E.

    1986-01-01

    At the start of the design of the liquid radwaste control system for a nuclear generating station under construction, several serious problems were detected. The solution incorporated a new approach utilizing a computer and a blend of standard and custom software to replace the existing conventionally instrumented benchboard. The computer-based system, in addition to solving the problems associated with the benchboard design, also provided other enhancements which significantly improved the operability and reliability of the radwaste system. The functionality of the computer-based radwaste control system also enabled additional applications to be added to an expanded multitask version of the radwaste computer: 1) a Nuclear Regulatory Commission (NRC) requirement that all nuclear power plants have an emergency response facility status monitoring system; and 2) the sophisticated temperature monitoring and trending requested by the electric generator manufacturer to continue its warranty commitments. The addition of these tasks to the radwaste computer saved the cost of one or more computers that would be dedicated to these work requirements

  1. The importance of the ammonia purification process in ammonia-water absorption systems

    International Nuclear Information System (INIS)

    Fernandez-Seara, Jose; Sieres, Jaime

    2006-01-01

    Practical experience in working with ammonia-water absorption systems shows that the ammonia purification process is a crucial issue in order to obtain an efficient and reliable system. In this paper, the detrimental effects of the residual water content in the vapour refrigerant are described and quantified based on the system design variables that determine the effectiveness of the purification process. The study has been performed considering a single stage system with a distillation column with complete condensation. The ammonia purification effectiveness of the column is analysed in terms of the efficiencies in the stripping and rectifying sections and the reflux ratio. By varying the efficiencies from 0 to 1, systems with neither the rectifying nor stripping section, with either the rectifying or stripping section, or with both sections can be considered. The impact of the ammonia purification process on the absorption system performance is studied based on the column efficiencies and reflux ratio; and its effects on refrigerant concentration, system COP, system pressures and main system mass flow rates and concentrations are analysed. When the highest efficiency rectifying sections are used a combination of generation temperature and reflux ratio which leads to optimum COP values is found. The analysis covers different operating conditions with air and water cooled systems from refrigeration to air conditioning applications by changing the evaporation temperature. The importance of rectification in each kind of application is evaluated

  2. Quantitative evaluation of the fault tolerance of systems important to the safety of atomic power plants

    International Nuclear Information System (INIS)

    Malkin, S.D.; Sivokon, V.P.; Shmatkova, L.V.

    1989-01-01

    Fault tolerance is the property of a system to preserve its performance upon failures of its components. Thus, in nuclear-reactor technology one has only a qualitative evaluation of fault tolerance - the single-failure criterion, which does not enable one to compare and perform goal-directed design of fault-tolerant systems, and in the field of computer technology there are no generally accepted evaluations of fault tolerance that could be applied effectively to reactor systems. This paper considers alternative evaluations of fault tolerance and a method of comprehensive automated calculation of the reliability and fault tolerance of complex systems. The authors presented quantitative estimates of fault tolerance that develop the single-failure criterion. They have limiting processes that allow simple and graphical standardization. They worked out a method and a program for comprehensive calculation of the reliability and fault tolerance of systems of complex structure that are important to the safety of atomic power plants. The quantitative evaluation of the fault tolerance of these systems exhibits a degree of insensitivity to failures and shows to what extent their reliability is determined by a rigorously defined structure, and to what extent by the probabilistic reliability characteristics of the components. To increase safety, one must increase the fault tolerance of the most important systems of atomic power plants

  3. Improved importance sampling technique for efficient simulation of digital communication systems

    Science.gov (United States)

    Lu, Dingqing; Yao, Kung

    1988-01-01

    A new, improved importance sampling (IIS) approach to simulation is considered. Some basic concepts of IS are introduced, and detailed evolutions of simulation estimation variances for Monte Carlo (MC) and IS simulations are given. The general results obtained from these evolutions are applied to the specific previously known conventional importance sampling (CIS) technique and the new IIS technique. The derivation for a linear system with no signal random memory is considered in some detail. For the CIS technique, the optimum input scaling parameter is found, while for the IIS technique, the optimum translation parameter is found. The results are generalized to a linear system with memory and signals. Specific numerical and simulation results are given which show the advantages of CIS over MC and IIS over CIS for simulations of digital communications systems.

  4. Performance Equivalency between Computer-Based and Traditional Pen-and-Paper Assessment: A Case Study in Clinical Anatomy

    Science.gov (United States)

    Guimarães, Bruno; Ribeiro, José; Cruz, Bernardo; Ferreira, André; Alves, Hélio; Cruz-Correia, Ricardo; Madeira, Maria Dulce; Ferreira, Maria Amélia

    2018-01-01

    The time, material, and staff-consuming nature of anatomy's traditional pen-and-paper assessment system, the increase in the number of students enrolling in medical schools and the ever-escalating workload of academic staff have made the use of computer-based assessment (CBA) an attractive proposition. To understand the impact of such shift in the…

  5. Facilitating Integration of Electron Beam Lithography Devices with Interactive Videodisc, Computer-Based Simulation and Job Aids.

    Science.gov (United States)

    Von Der Linn, Robert Christopher

    A needs assessment of the Grumman E-Beam Systems Group identified the requirement for additional skill mastery for the engineers who assemble, integrate, and maintain devices used to manufacture integrated circuits. Further analysis of the tasks involved led to the decision to develop interactive videodisc, computer-based job aids to enable…

  6. A discussion of system reliability and the relative importance of pumps and valves to overall system availability

    Energy Technology Data Exchange (ETDEWEB)

    Poole, A.B. [Oak Ridge National Lab., TN (United States)

    1996-12-01

    An analysis was undertaken to establish preliminary trends for how component aging can effect failure rates for swing check valves, centrifugal pumps and motor operated valves. These failure rate trends were evaluated over time and linear aging rate models established. The failure rate models were then used with classic reliability theories to estimate reliability as a function of operating time. Reliability theory was also used to establish a simple system reliability model. Using the system model, the relative importance of pumps and valves to the overall system reliability were studied. Conclusions were established relative to overall system availability over time and the relative unavailabilities of the various components studied.

  7. A discussion of system reliability and the relative importance of pumps and valves to overall system availability

    International Nuclear Information System (INIS)

    Poole, A.B.

    1996-01-01

    An analysis was undertaken to establish preliminary trends for how component aging can effect failure rates for swing check valves, centrifugal pumps and motor operated valves. These failure rate trends were evaluated over time and linear aging rate models established. The failure rate models were then used with classic reliability theories to estimate reliability as a function of operating time. Reliability theory was also used to establish a simple system reliability model. Using the system model, the relative importance of pumps and valves to the overall system reliability were studied. Conclusions were established relative to overall system availability over time and the relative unavailabilities of the various components studied

  8. Classification of transportation packaging and dry spent fuel storage system components according to importance to safety

    International Nuclear Information System (INIS)

    McConnell, J.W., Jr; Ayers, A.L. Jr; Tyacke, M.J.

    1996-02-01

    This report provides a graded approach for classification of components used in transportation packaging and dry spent fuel storage systems. This approach provides a method for identifying, the classification of components according to importance to safety within transportation packagings and dry spent fuel storage systems. Record retention requirements are discussed to identify the documentation necessary to validate that the individual components were fabricated in accordance with their assigned classification. A review of the existing regulations pertaining to transportation packagings and dry storage systems was performed to identify current requirements The general types of transportation packagings and dry storage systems were identified. Discussions were held with suppliers and fabricators of packagings and storage systems to determine current practices. The methodology used in this report is based on Regulatory Guide 7.10, Establishing Quality Assurance Programs for Packaging Used in the Transport of Radioactive Material. This report also includes a list of generic components for each of the general types of transportation packagings and spent fuel storage systems. The safety importance of each component is discussed, and a classification category is assigned

  9. Quantum computers based on electron spins controlled by ultrafast off-resonant single optical pulses.

    Science.gov (United States)

    Clark, Susan M; Fu, Kai-Mei C; Ladd, Thaddeus D; Yamamoto, Yoshihisa

    2007-07-27

    We describe a fast quantum computer based on optically controlled electron spins in charged quantum dots that are coupled to microcavities. This scheme uses broadband optical pulses to rotate electron spins and provide the clock signal to the system. Nonlocal two-qubit gates are performed by phase shifts induced by electron spins on laser pulses propagating along a shared waveguide. Numerical simulations of this scheme demonstrate high-fidelity single-qubit and two-qubit gates with operation times comparable to the inverse Zeeman frequency.

  10. Model of Procedure Usage – Results from a Qualitative Study to Inform Design of Computer-Based Procedures

    Energy Technology Data Exchange (ETDEWEB)

    Johanna H Oxstrand; Katya L Le Blanc

    2012-07-01

    The nuclear industry is constantly trying to find ways to decrease the human error rate, especially the human errors associated with procedure use. As a step toward the goal of improving procedure use performance, researchers, together with the nuclear industry, have been looking at replacing the current paper-based procedures with computer-based procedure systems. The concept of computer-based procedures is not new by any means; however most research has focused on procedures used in the main control room. Procedures reviewed in these efforts are mainly emergency operating procedures and normal operating procedures. Based on lessons learned for these previous efforts we are now exploring a more unknown application for computer based procedures - field procedures, i.e. procedures used by nuclear equipment operators and maintenance technicians. The Idaho National Laboratory, the Institute for Energy Technology, and participants from the U.S. commercial nuclear industry are collaborating in an applied research effort with the objective of developing requirements and specifications for a computer-based procedure system to be used by field operators. The goal is to identify the types of human errors that can be mitigated by using computer-based procedures and how to best design the computer-based procedures to do this. The underlying philosophy in the research effort is “Stop – Start – Continue”, i.e. what features from the use of paper-based procedures should we not incorporate (Stop), what should we keep (Continue), and what new features or work processes should be added (Start). One step in identifying the Stop – Start – Continue was to conduct a baseline study where affordances related to the current usage of paper-based procedures were identified. The purpose of the study was to develop a model of paper based procedure use which will help to identify desirable features for computer based procedure prototypes. Affordances such as note taking, markups

  11. Optimizing health system response to patient's needs: an argument for the importance of functioning information.

    Science.gov (United States)

    Hopfe, Maren; Prodinger, Birgit; Bickenbach, Jerome E; Stucki, Gerold

    2017-06-06

    Current health systems are increasingly challenged to meet the needs of a growing number of patients living with chronic and often multiple health conditions. The primary outcome of care, it is argued, is not merely curing disease but also optimizing functioning over a person's life span. According to the World Health Organization, functioning can serve as foundation for a comprehensive picture of health and augment the biomedical perspective with a broader and more comprehensive picture of health as it plays out in people's lives. The crucial importance of information about patient's functioning for a well-performing health system, however, has yet to be sufficiently appreciated. This paper argues that functioning information is fundamental in all components of health systems and enhances the capacity of health systems to optimize patients' health and health-related needs. Beyond making sense of biomedical disease patterns, health systems can profit from using functioning information to improve interprofessional collaboration and achieve cross-cutting disease treatment outcomes. Implications for rehabilitation Functioning is a key health outcome for rehabilitation within health systems. Information on restoring, maintaining, and optimizing human functioning can strengthen health system response to patients' health and rehabilitative needs. Functioning information guides health systems to achieve cross-cutting health outcomes that respond to the needs of the growing number of individuals living with chronic and multiple health conditions. Accounting for individuals functioning helps to overcome fragmentation of care and to improve interprofessional collaboration across settings.

  12. Simulative Investigation on Spectral Efficiency of Unipolar Codes based OCDMA System using Importance Sampling Technique

    Science.gov (United States)

    Farhat, A.; Menif, M.; Rezig, H.

    2013-09-01

    This paper analyses the spectral efficiency of Optical Code Division Multiple Access (OCDMA) system using Importance Sampling (IS) technique. We consider three configurations of OCDMA system namely Direct Sequence (DS), Spectral Amplitude Coding (SAC) and Fast Frequency Hopping (FFH) that exploits the Fiber Bragg Gratings (FBG) based encoder/decoder. We evaluate the spectral efficiency of the considered system by taking into consideration the effect of different families of unipolar codes for both coherent and incoherent sources. The results show that the spectral efficiency of OCDMA system with coherent source is higher than the incoherent case. We demonstrate also that DS-OCDMA outperforms both others in terms of spectral efficiency in all conditions.

  13. Sustainability assessment of stormwater management systems and the importance of pollutants in runoff

    DEFF Research Database (Denmark)

    Brudler, Sarah; Arnbjerg-Nielsen, Karsten; Ammitsøe, Christian

    substance groups present in runoff, metals cause the highest impacts. To integrate this method into holistic sustainability assessment, we assess the complete life cycle of a complex stormwater management. We show that runoff discharges have a high relative importance: The impacts exceed the combined......We develop a method to systematically include impacts caused by runoff discharge into the sustainability assessment of stormwater management systems. By defining priority pollutants and calculating mean concentrations, an average ecotoxicity impact per litre of runoff is calculated. Of all assessed...... impacts of implementation, maintenance and decommissioning of the stormwater management system....

  14. Enhancing school-based asthma education efforts using computer-based education for children.

    Science.gov (United States)

    Nabors, Laura A; Kockritz, Jennifer L; Ludke, Robert L; Bernstein, Jonathan A

    2012-03-01

    Schools are an important site for delivery of asthma education programs. Computer-based educational programs are a critical component of asthma education programs and may be a particularly important education method in busy school environments. The objective of this brief report is to review and critique computer-based education efforts in schools. The results of our literature review indicated that school-based computer education efforts are related to improved knowledge about asthma and its management. In some studies, improvements in clinical outcomes also occur. Data collection programs need to be built into games that improve knowledge. Many projects do not appear to last for periods greater than 1 year and little information is available about cultural relevance of these programs. Educational games and other programs are effective methods of delivering knowledge about asthma management and control. Research about the long-term effects of this increased knowledge, in regard to behavior change, is needed. Additionally, developing sustainable projects, which are culturally relevant, is a goal for future research.

  15. The relative importance of mass and wind data in the FGGE observing system

    Science.gov (United States)

    Kalnay, E.; Jusem, J. C.; Pfaendtner, J.

    1986-01-01

    The use of mass and wind data in numerical weather prediction is examined. The applicability of the mass and wind data on the skill of numerical weather prediction is evaluated by real data assimilation experiments using the the NASA/Goddard Laboratory for Atmospheres analysis/forecast system of Baker (1983) and Kalnay et al. (1983). It is observed that the wind observations are important for small scales and in the tropics and that the wind observations are more accurate than mass observations.

  16. Important roles of P2Y receptors in the inflammation and cancer of digestive system

    OpenAIRE

    Wan, Han-Xing; Hu, Jian-Hong; Xie, Rei; Yang, Shi-Ming; Dong, Hui

    2016-01-01

    Purinergic signaling is important for many biological processes in humans. Purinoceptors P2Y are widely distributed in human digestive system and different subtypes of P2Y receptors mediate different physiological functions from metabolism, proliferation, differentiation to apoptosis etc. The P2Y receptors are essential in many gastrointestinal functions and also involve in the occurrence of some digestive diseases. Since different subtypes of P2Y receptors are present on the same cell of dig...

  17. Adhesive systems: important aspects related to their composition and clinical use

    Directory of Open Access Journals (Sweden)

    Mario Honorato Silva e Souza Junior

    2010-06-01

    Full Text Available This literature review article addresses the types and the main components of different etch-and-rinse and self-etch adhesive systems available in the market, and relates them to their function, possible chemical interactions and infuence of handling characteristics. Scanning electron microscopy (SEM images are presented to characterize the interface between adhesives and dentin. Adhesive systems have been recently classifed according to their adhesion approaches in etch-and-rinse, self-etch and glass ionomer. The etch-and-rinse systems require a specifc acid-etch procedure and may be performed in two or three steps. Self-etch systems employ acidic monomers that demineralize and impregnate dental substrates almost at the same time. These systems are separated in one or two steps. Some advantages and defciencies were noted for etch-and-rinse and self-etch approaches, mainly for the simplifed ones due to some chemical associations and interactions. The SEM micrographs illustrate different relationships between adhesive systems and dental structures, particularly dentin. The knowledge of composition, characteristics and mechanisms of adhesion of each adhesive system is of fundamental importance to permit the adoption of ideal bonding strategies under clinical conditions.

  18. Computer-based learning--an aid to successful teaching of pharmacology?

    Science.gov (United States)

    E Hughes, Ian

    2002-07-01

    Various types of software have been developed for use in pharmacology courses. These include: simple drill (question and answer) software; electronic books; video material; tutorial type programs; simulations; and electronic learning environments for course organisation and delivery. These different types of software can be used in different ways to achieve very different learning objectives and gains in teaching efficiency. For example, software can be used: in tutorial and small group teaching; in lectures; to better prepare students for practical work; as a replacement for practicals; to provide options within a limited course structure; to supplement lectures and enable students to work at their own pace; to provide ongoing access to self-assessment throughout a course; to aid distance learning; as remedial teaching and to extend the student learning experience in areas which are too expensive or too time consuming or for which staff expertise does not exist. Evidence indicates that it is insufficient simply to make computer based learning material available to students. Like a laboratory class, it must be fully integrated into a module if real benefits are to be obtained. Students need to be taught how to learn from computer-based learning materials and how to integrate this learning tool in their learning strategy. Teachers need to be supported not only with information about the availability of software but, equally importantly, about how it can be integrated into modules. We are all delivering teaching and facilitating learning in a changing environment and subject to a variety of increasing pressures. It may well be that computer based learning materials may help to maintain a high quality of pharmacology teaching within this changing environment but we need more pedagogical research at the discipline level to establish how this can best be done.

  19. a System Dynamics Model to Study the Importance of Infrastructure Facilities on Quality of Primary Education System in Developing Countries

    Science.gov (United States)

    Pedamallu, Chandra Sekhar; Ozdamar, Linet; Weber, Gerhard-Wilhelm; Kropat, Erik

    2010-06-01

    The system dynamics approach is a holistic way of solving problems in real-time scenarios. This is a powerful methodology and computer simulation modeling technique for framing, analyzing, and discussing complex issues and problems. System dynamics modeling and simulation is often the background of a systemic thinking approach and has become a management and organizational development paradigm. This paper proposes a system dynamics approach for study the importance of infrastructure facilities on quality of primary education system in developing nations. The model is proposed to be built using the Cross Impact Analysis (CIA) method of relating entities and attributes relevant to the primary education system in any given community. We offer a survey to build the cross-impact correlation matrix and, hence, to better understand the primary education system and importance of infrastructural facilities on quality of primary education. The resulting model enables us to predict the effects of infrastructural facilities on the access of primary education by the community. This may support policy makers to take more effective actions in campaigns.

  20. Feasibility of Computer-Based Videogame Therapy for Children with Cerebral Palsy.

    Science.gov (United States)

    Radtka, Sandra; Hone, Robert; Brown, Charles; Mastick, Judy; Melnick, Marsha E; Dowling, Glenna A

    2013-08-01

    Standing and gait balance problems are common in children with cerebral palsy (CP), resulting in falls and injuries. Task-oriented exercises to strengthen and stretch muscles that shift the center of mass and change the base of support are effective in improving balance. Gaming environments can be challenging and fun, encouraging children to engage in exercises at home. The aims of this project were to demonstrate the technical feasibility, ease of use, appeal, and safety of a computer-based videogame program designed to improve balance in children with CP. This study represents a close collaboration between computer design and clinical team members. The first two phases were performed in the laboratory, and the final phase was done in subjects' homes. The prototype balance game was developed using computer-based real-time three-dimensional programming that enabled the team to capture engineering data necessary to tune the system. Videogame modifications, including identifying compensatory movements, were made in an iterative fashion based on feedback from subjects and observations of clinical and software team members. Subjects ( n =14) scored the game 21.5 out of 30 for ease of use and appeal, 4.0 out of 5 for enjoyment, and 3.5 on comprehension. There were no safety issues, and the games performed without technical flaws in final testing. A computer-based videogame incorporating therapeutic movements to improve gait and balance in children with CP was appealing and feasible for home use. A follow-up study examining its effectiveness in improving balance in children with CP is recommended.

  1. Feasibility of Computer-Based Videogame Therapy for Children with Cerebral Palsy

    Science.gov (United States)

    Radtka, Sandra; Hone, Robert; Brown, Charles; Mastick, Judy; Melnick, Marsha E.

    2013-01-01

    Abstract Objectives Standing and gait balance problems are common in children with cerebral palsy (CP), resulting in falls and injuries. Task-oriented exercises to strengthen and stretch muscles that shift the center of mass and change the base of support are effective in improving balance. Gaming environments can be challenging and fun, encouraging children to engage in exercises at home. The aims of this project were to demonstrate the technical feasibility, ease of use, appeal, and safety of a computer-based videogame program designed to improve balance in children with CP. Materials and Methods This study represents a close collaboration between computer design and clinical team members. The first two phases were performed in the laboratory, and the final phase was done in subjects' homes. The prototype balance game was developed using computer-based real-time three-dimensional programming that enabled the team to capture engineering data necessary to tune the system. Videogame modifications, including identifying compensatory movements, were made in an iterative fashion based on feedback from subjects and observations of clinical and software team members. Results Subjects (n=14) scored the game 21.5 out of 30 for ease of use and appeal, 4.0 out of 5 for enjoyment, and 3.5 on comprehension. There were no safety issues, and the games performed without technical flaws in final testing. Conclusions A computer-based videogame incorporating therapeutic movements to improve gait and balance in children with CP was appealing and feasible for home use. A follow-up study examining its effectiveness in improving balance in children with CP is recommended. PMID:24761324

  2. Assessment of the importance of mixing in the Yucca Mountain hydrogeological system

    International Nuclear Information System (INIS)

    Gomez, Javier B.; Auque, Luis F.; Gimeno, Maria; Acero, Patricia; Peterman, Zell; Oliver, Thomas A.; Gascoyne, Mel; Laaksoharju, Marcus

    2011-02-01

    The main objective of this work is to assess the importance of mixing on the hydrochemistry of waters in and around Yucca Mountain, most importantly in those waters south of Yucca Mountain. Due to the general north-south gradient of groundwater flow in the Yucca Mountain area, leakage from the proposed high-level radioactive waste repository would have the greatest consequences in the saturated zone waters south of Yucca Mountain. In this area (Amargosa River, Amargosa Flat and Ash Meadows), three main aquifers interact: the Regional Palaeozoic Carbonate Aquifer (RCA), the Tertiary Tuffs Aquifer (TTA) and the Quaternary Basin-fill Aquifer (QBfA). One consequence of upward leakage from the Palaeozoic Carbonate Aquifer would be to dilute the contaminant plume should one develop from the radioactive waste repository at Yucca Mountain. The reverse, downward leakage from the Tertiary Tuffs Aquifer or the Quaternary Basin-fill Aquifer into the Palaeozoic Carbonate Aquifer would contaminate a major aquifer system. It is clearly of the utmost importance to explore the links between theses aquifer systems and to assess the degree of mixing between the groundwaters. To attain this general objective, the following specific objectives have been either defined in advance or decided as being important during the development of the project: 1. Compile a dataset of water samples from the Yucca Mountain area. This dataset should contain samples from all the potential water types that contribute to the chemistry of the groundwaters in the aquifer systems in the area. 2. Perform a careful total-system exploratory analysis on the initial (raw) dataset in order to identify trends and outliers. 3. Perform a detailed exploratory analysis of each individual hydrofacies with the aim of identifying and eliminating from the raw dataset all the samples heavily affected by processes other than mixing (e.g. water-rock interaction, evaporation, cation exchange). PHREEQC simulations were

  3. Assessment of the importance of mixing in the Yucca Mountain hydrogeological system

    Energy Technology Data Exchange (ETDEWEB)

    Gomez, Javier B.; Auque, Luis F.; Gimeno, Maria; Acero, Patricia (Geochemical Modelling Group, Dept. of Earth Sciences, Univ. of Zaragoza (Spain)); Peterman, Zell; Oliver, Thomas A. (U.S. Geological Survey (United States)); Gascoyne, Mel (Gascoyne Geoprojects Inc (Canada)); Laaksoharju, Marcus (Geopoint AB (Sweden))

    2011-02-15

    The main objective of this work is to assess the importance of mixing on the hydrochemistry of waters in and around Yucca Mountain, most importantly in those waters south of Yucca Mountain. Due to the general north-south gradient of groundwater flow in the Yucca Mountain area, leakage from the proposed high-level radioactive waste repository would have the greatest consequences in the saturated zone waters south of Yucca Mountain. In this area (Amargosa River, Amargosa Flat and Ash Meadows), three main aquifers interact: the Regional Palaeozoic Carbonate Aquifer (RCA), the Tertiary Tuffs Aquifer (TTA) and the Quaternary Basin-fill Aquifer (QBfA). One consequence of upward leakage from the Palaeozoic Carbonate Aquifer would be to dilute the contaminant plume should one develop from the radioactive waste repository at Yucca Mountain. The reverse, downward leakage from the Tertiary Tuffs Aquifer or the Quaternary Basin-fill Aquifer into the Palaeozoic Carbonate Aquifer would contaminate a major aquifer system. It is clearly of the utmost importance to explore the links between theses aquifer systems and to assess the degree of mixing between the groundwaters. To attain this general objective, the following specific objectives have been either defined in advance or decided as being important during the development of the project: 1. Compile a dataset of water samples from the Yucca Mountain area. This dataset should contain samples from all the potential water types that contribute to the chemistry of the groundwaters in the aquifer systems in the area. 2. Perform a careful total-system exploratory analysis on the initial (raw) dataset in order to identify trends and outliers. 3. Perform a detailed exploratory analysis of each individual hydrofacies with the aim of identifying and eliminating from the raw dataset all the samples heavily affected by processes other than mixing (e.g. water-rock interaction, evaporation, cation exchange). PHREEQC simulations were

  4. Computer-based multisensory learning in children with developmental dyslexia.

    Science.gov (United States)

    Kast, Monika; Meyer, Martin; Vögeli, Christian; Gross, Markus; Jäncke, Lutz

    2007-01-01

    Several attempts have been made to remediate developmental dyslexia using various training environments. Based on the well-known retrieval structure model, the memory strength of phonemes and graphemes should be strengthened by visual and auditory associations between graphemes and phonemes. Using specifically designed training software, we examined whether establishing a multitude of visuo-auditory associations might help to mitigate writing errors in children with developmental dyslexia. Forty-three children with developmental dyslexia and 37 carefully matched normal reading children performed a computer-based writing training (15-20 minutes 4 days a week) for three months with the aim to recode a sequential textual input string into a multi-sensory representation comprising visual and auditory codes (including musical tones). The study included four matched groups: a group of children with developmental dyslexia (n=20) and a control group (n=18) practiced with the training software in the first period (3 months, 15-20 minutes 4 days a week), while a second group of children with developmental dyslexia (n=23) (waiting group) and a second control group (n=19) received no training during the first period. In the second period the children with developmental dyslexia and controls who did not receive training during the first period now took part in the training. Children with developmental dyslexia who did not perform computer-based training during the first period hardly improved their writing skills (post-pre improvement of 0-9%), the dyslexic children receiving training strongly improved their writing skills (post-pre improvement of 19-35%). The group who did the training during the second period also revealed improvement of writing skills (post-pre improvement of 27-35%). Interestingly, we noticed a strong transfer from trained to non-trained words in that the children who underwent the training were also better able to write words correctly that were not part

  5. Engaging Employees: The Importance of High-Performance Work Systems for Patient Safety.

    Science.gov (United States)

    Etchegaray, Jason M; Thomas, Eric J

    2015-12-01

    To develop and test survey items that measure high-performance work systems (HPWSs), report psychometric characteristics of the survey, and examine associations between HPWSs and teamwork culture, safety culture, and overall patient safety grade. We reviewed literature to determine dimensions of HPWSs and then asked executives to tell us which dimensions they viewed as most important for safety and quality. We then created a HPWSs survey to measure the most important HPWSs dimensions. We administered an anonymous, electronic survey to employees with direct patient care working at a large hospital system in the Southern United States and looked for linkages between HPWSs, culture, and outcomes. Similarities existed for the HPWS practices viewed as most important by previous researchers and health-care executives. The HPWSs survey was found to be reliable, distinct from safety culture and teamwork culture based on a confirmatory factor analysis, and was the strongest predictor of the extent to which employees felt comfortable speaking up about patient safety problems as well as patient safety grade. We used information from a literature review and executive input to create a reliable and valid HPWSs survey. Future research needs to examine whether HPWSs is associated with additional safety and quality outcomes.

  6. PHILOSOPHICAL AND ANTHROPOLOGICAL IMPORTANCE OF DEVELOPMENT OF ARTIFICIALLY CREATED INTELLIGENT SYSTEMS

    Directory of Open Access Journals (Sweden)

    Yu. D. Gensitskiy

    2015-12-01

    Full Text Available Purpose. Understanding the philosophical and anthropological importance of the development the artificial intelligence systems requires the analysis of the socio and anthropological content of intercomputer problems of interaction in the context of media philosophical praxis, anthropological maintenance of intellect nature, considering the specifics of the concept of artificial intelligence systems in the environment of M2M development of socio-cognitive practices of intercomputer interaction of social and humanitarian potential. Methodology. The implementation target is seen in the use of scientific and theoretical basis of the media philosophical, philosophical anthropology, the media philosophical approach to understanding society, science and technology, the use of publications on selected topics of research. Scientific novelty. The concept of artificial intelligence systems in the aspect of social and humanitarian potential of their formation and development in the environment of M2M was considered. The problems of machine learning as technology transformation M2M were analysed. The anthropological threats to the development of artificially created intelligent systems were defined. Conclusions. From the global risks point of view, one of the most critical circumstances due to the artificial intelligent system can strengthen its intelligence very quickly. The obvious reason for suspecting such an opportunity – a recursive self-improvement. Such system becomes smarter, including the intelligent writing of internal cognitive function, that the ability to rewrite their existing cognitive function to make it work better. This will make such systems more intelligent, and smarter in terms of the processing itself. The success of artificial intelligence may be the beginning of the end of the human race. Almost any technology falling into malicious hands reveals the potential for harm, but when it comes to artificial intelligent system, there is a

  7. Importance of the mooring system using in marine radioecology, present and planned studies in our country

    International Nuclear Information System (INIS)

    Kilic, O.; Belivermis, M.; Cotuk, Y.; Topcuoglu, S.

    2009-01-01

    Nowadays, the most important biomonitor organism is Mediterranean mussel species (Mytilus galloprovincialis) in handled monitoring studies in the marine radioecology content. This bio indicator species is also important both of the national and international monitoring programs. In this sense, Mediterranean and Black Sea mussel monitoring project was carried out with participating many countries which they have bank to Mediterranean and Black Sea by supported CIESM (Commission Internationale pour l'Expolaration Scientiphique de la mer Mediterranee) during the period of 2002-2004. All scientific data collected in a data bank. Furthermore, some new techniques were created for sampling and preparation of samples in monitoring of radionuclides and chemical pollutants by this project. On the other hand, the advantages of active bio monitoring compare to the passive bio monitoring were presented by discussed significance of mooring system.The mussel transplantation is carried out using of mooring systems for two goals. First one of them, available pollutants are to monitor in the absence of the mussel species in the stations by mussel transplantation in those stations. The other one of them, mussels which they are in same length and physiological state are to transplant the mooring systems and to monitor pollutants in mussel living and intended stations. In our country, the first mussel transplantation with established the mooring system was performed at the Oeluedeniz, Antalya, Tasucu, Botas and Arsuz stations. Active monitoring results of the works for radionuclide concentrations were given in this presented paper as well as passive monitoring findings were compared with the results obtained from Black Sea and Marmara Sea stations. Besides, it was presented the aim and content of mooring system that we planned to establish in the Golden Horn in this presentation.

  8. Research on Digital Forensic Readiness Design in a Cloud Computing-Based Smart Work Environment

    Directory of Open Access Journals (Sweden)

    Sangho Park

    2018-04-01

    Full Text Available Recently, the work environments of organizations have been in the process of transitioning into smart work environments by applying cloud computing technology in the existing work environment. The smart work environment has the characteristic of being able to access information assets inside the company from outside the company through cloud computing technology, share information without restrictions on location by using mobile terminals, and provide a work environment where work can be conducted effectively in various locations and mobile environments. Thus, in the cloud computing-based smart work environment, changes are occurring in terms of security risks, such as an increase in the leakage risk of an organization’s information assets through mobile terminals which have a high risk of loss and theft and increase the hacking risk of wireless networks in mobile environments. According to these changes in security risk, the reactive digital forensic method, which investigates digital evidence after the occurrence of security incidents, appears to have a limit which has led to a rise in the necessity of proactive digital forensic approaches wherein security incidents can be addressed preemptively. Accordingly, in this research, we design a digital forensic readiness model at the level of preemptive prevention by considering changes in the cloud computing-based smart work environment. Firstly, we investigate previous research related to the cloud computing-based smart work environment and digital forensic readiness and analyze a total of 50 components of digital forensic readiness. In addition, through the analysis of the corresponding preceding research, we design seven detailed areas, namely, outside the organization environment, within the organization guideline, system information, terminal information, user information, usage information, and additional function. Then, we design a draft of the digital forensic readiness model in the cloud

  9. Many-body localization in disorder-free systems: The importance of finite-size constraints

    Energy Technology Data Exchange (ETDEWEB)

    Papić, Z., E-mail: zpapic@perimeterinstitute.ca [School of Physics and Astronomy, University of Leeds, Leeds, LS2 9JT (United Kingdom); Perimeter Institute for Theoretical Physics, Waterloo, ON N2L 2Y5 (Canada); Stoudenmire, E. Miles [Perimeter Institute for Theoretical Physics, Waterloo, ON N2L 2Y5 (Canada); Abanin, Dmitry A. [Department of Theoretical Physics, University of Geneva, 24 quai Ernest-Ansermet, 1211 Geneva (Switzerland); Perimeter Institute for Theoretical Physics, Waterloo, ON N2L 2Y5 (Canada)

    2015-11-15

    Recently it has been suggested that many-body localization (MBL) can occur in translation-invariant systems, and candidate 1D models have been proposed. We find that such models, in contrast to MBL systems with quenched disorder, typically exhibit much more severe finite-size effects due to the presence of two or more vastly different energy scales. In a finite system, this can artificially split the density of states (DOS) into bands separated by large gaps. We argue for such models to faithfully represent the thermodynamic limit behavior, the ratio of relevant coupling must exceed a certain system-size depedent cutoff, chosen such that various bands in the DOS overlap one another. Setting the parameters this way to minimize finite-size effects, we study several translation-invariant MBL candidate models using exact diagonalization. Based on diagnostics including entanglement and local observables, we observe thermal (ergodic), rather than MBL-like behavior. Our results suggest that MBL in translation-invariant systems with two or more very different energy scales is less robust than perturbative arguments suggest, possibly pointing to the importance of non-perturbative effects which induce delocalization in the thermodynamic limit.

  10. Equipment line-up developed for structuring programmed digital systems important to safety

    International Nuclear Information System (INIS)

    Remus, L.; Colling, J.M.; Buisson, J.

    1986-01-01

    The use of the programmed digital techniques in systems important to safety led to developing equipment line-ups which allow to procedure, through using a restricted number of sub-assemblies, a variety of facilities capable of performing diversified functions. Upon remembering the requirements that such equipment are required to meet (quality assurance both at the design and production stages, qualification, testing opportunities, etc.) the equipments produced by MERLIN GERIN are described in this paper. Such equipments include a whole set of printed circuit boards, plug-in units with self-engaging connectors and the related cabinets to accomodate them. The following systems are made up of such equipments: Digital integrated protection system; Rod control and monitoring system; Reactor power distribution monitoring equipment. This equipment line-up has been gradually complemented and is still further expanding both as a result of the component further development or for the purpose of meeting new requirements or applications (new digital neutron instrumentation, local area networks). Experience gained thus far provides us with the capability of working out in a short time programmed systems for further applications in the nuclear power field

  11. Fission product transport in the primary system, important phenomena, and code status

    International Nuclear Information System (INIS)

    Gieseke, J.A.; Jordan, H.; Kuhlman, M.R.

    1990-01-01

    The purpose of this paper is to identify important issues concerning the transport and deposition of radionuclides in the reactor coolant system (RCS) under accident conditions and to examine how such issues are being treated or should be treated by the various available computer codes. In general, the RCS is a very important section of the transport pathway along which radionuclides move and by which they are attenuated as they travel after being released from the fuel. The RCS can serve as a sink for radionuclides that may deposit from the gas and react with surfaces, or can serve as a repository for materials deposited from the gas which are then available for later release into the transporting gas stream. The RCS may also have thermal hydraulic conditions that foster aerosol growth by condensation or agglomeration, and may provide an environment in which gas phase or heterogeneous chemical reactions may occur

  12. The Importance of "Super Sensible Substrate" in Kant's System of Philosophy

    Directory of Open Access Journals (Sweden)

    R Mahoozi

    2013-08-01

    Full Text Available In Kant's transcendental philosophy, "sensible" is an object composed of multiple sense intuitions and a priori constitutive of mind. In this philosophy, sensible nature is empirical and mechanical that becomes universal and necessary under determinate concepts and principles of Understanding. But, there is another space not determined by concepts and principles of Understanding. This space is "super sensible". This super sensible is the space of noumenal objects and is very important in Kant's system of philosophy. This sphere is important for explaining the principle of uniformity of nature as a supporter to induction, some ethical items and religion theory, organisms and culture. But how can we get at this realm? And is this realm compatible with the realm of empirical knowledge? In this paper we want to explain these matters.

  13. The Importance of \\"Super Sensible Substrate\\" in Kant\\'s System of Philosophy

    Directory of Open Access Journals (Sweden)

    R Mahoozi

    2013-09-01

    Full Text Available In Kant's transcendental philosophy, "sensible" is an object composed of multiple sense intuitions and a priori constitutive of mind. In this philosophy, sensible nature is empirical and mechanical that becomes universal and necessary under determinate concepts and principles of Understanding. But, there is another space not determined by concepts and principles of Understanding. This space is "super sensible". This super sensible is the space of noumenal objects and is very important in Kant's system of philosophy. This sphere is important for explaining the principle of uniformity of nature as a supporter to induction, some ethical items and religion theory, organisms and culture. But how can we get at this realm? And is this realm compatible with the realm of empirical knowledge? In this paper we want to explain these matters.

  14. Human Resource Reforms in Public Administration: The Importance of the Reward System

    Directory of Open Access Journals (Sweden)

    De Freitas Bradley Christopher

    2017-08-01

    Full Text Available Human resource management encompasses administrating and managing human resources or otherwise known as employees. The HR or Human Resources department of any company, whether it be public or private, deals with the day to aspects pertaining to employees, from the recruitment process to probably the most important aspect for any employee; remuneration and benefits. The importance of finding a perfect equilibrium between monetary and non-monetary incentives is crucial in obtaining an efficient work environment, as well as increasing productivity and employee motivation. Having an administrative background or knowledge is essential for any HR manager, in order to detect and implement the most beneficial reward system for both implicated parties.

  15. Personal Computer Based Controller For Switched Reluctance Motor Drives

    Science.gov (United States)

    Mang, X.; Krishnan, R.; Adkar, S.; Chandramouli, G.

    1987-10-01

    Th9, switched reluctance motor (SRM) has recently gained considerable attention in the variable speed drive market. Two important factors that have contributed to this are, the simplicity of construction and the possibility of developing low cost con-trollers with minimum number of switching devices in the drive circuits. This is mainly due to the state-of-art of the present digital circuits technology and the low cost of switching devices. The control of this motor drive is under research. Optimized performance of the SRM motor drive is very dependent on the integration of the controller, converter and the motor. This research on system integration involves considerable changes in the control algorithms and their implementation. A Personal computer (PC) based controller is very appropriate for this purpose. Accordingly, the present paper is concerned with the design of a PC based controller for a SRM. The PC allows for real-time microprocessor control with the possibility of on-line system parameter modifications. Software reconfiguration of this controller is easier than a hardware based controller. User friendliness is a natural consequence of such a system. Considering the low cost of PCs, this controller will offer an excellent cost-effective means of studying the control strategies for the SRM drive intop greater detail than in the past.

  16. Students Perception on the Use of Computer Based Test

    Science.gov (United States)

    Nugroho, R. A.; Kusumawati, N. S.; Ambarwati, O. C.

    2018-02-01

    Teaching nowadays might use technology in order to disseminate science and knowledge. As part of teaching, the way evaluating study progress and result has also benefited from this IT rapid progress. The computer-based test (CBT) has been introduced to replace the more conventional Paper and Pencil Test (PPT). CBT are considered more advantageous than PPT. It is considered as more efficient, transparent, and has the ability of minimising fraud in cognitive evaluation. Current studies have indicated the debate of CBT vs PPT usage. Most of the current research compares the two methods without exploring the students’ perception about the test. This study will fill the gap in the literature by providing students’ perception on the two tests method. Survey approach is conducted to obtain the data. The sample is collected in two identical classes with similar subject in a public university in Indonesia. Mann-Whitney U test used to analyse the data. The result indicates that there is a significant difference between two groups of students regarding CBT usage. Student with different test method prefers to have test other than what they were having. Further discussion and research implication is discussed in the paper.

  17. A personal computer-based nuclear magnetic resonance spectrometer

    Science.gov (United States)

    Job, Constantin; Pearson, Robert M.; Brown, Michael F.

    1994-11-01

    Nuclear magnetic resonance (NMR) spectroscopy using personal computer-based hardware has the potential of enabling the application of NMR methods to fields where conventional state of the art equipment is either impractical or too costly. With such a strategy for data acquisition and processing, disciplines including civil engineering, agriculture, geology, archaeology, and others have the possibility of utilizing magnetic resonance techniques within the laboratory or conducting applications directly in the field. Another aspect is the possibility of utilizing existing NMR magnets which may be in good condition but unused because of outdated or nonrepairable electronics. Moreover, NMR applications based on personal computer technology may open up teaching possibilities at the college or even secondary school level. The goal of developing such a personal computer (PC)-based NMR standard is facilitated by existing technologies including logic cell arrays, direct digital frequency synthesis, use of PC-based electrical engineering software tools to fabricate electronic circuits, and the use of permanent magnets based on neodymium-iron-boron alloy. Utilizing such an approach, we have been able to place essentially an entire NMR spectrometer console on two printed circuit boards, with the exception of the receiver and radio frequency power amplifier. Future upgrades to include the deuterium lock and the decoupler unit are readily envisioned. The continued development of such PC-based NMR spectrometers is expected to benefit from the fast growing, practical, and low cost personal computer market.

  18. Diagnostic reliability of MMPI-2 computer-based test interpretations.

    Science.gov (United States)

    Pant, Hina; McCabe, Brian J; Deskovitz, Mark A; Weed, Nathan C; Williams, John E

    2014-09-01

    Reflecting the common use of the MMPI-2 to provide diagnostic considerations, computer-based test interpretations (CBTIs) also typically offer diagnostic suggestions. However, these diagnostic suggestions can sometimes be shown to vary widely across different CBTI programs even for identical MMPI-2 profiles. The present study evaluated the diagnostic reliability of 6 commercially available CBTIs using a 20-item Q-sort task developed for this study. Four raters each sorted diagnostic classifications based on these 6 CBTI reports for 20 MMPI-2 profiles. Two questions were addressed. First, do users of CBTIs understand the diagnostic information contained within the reports similarly? Overall, diagnostic sorts of the CBTIs showed moderate inter-interpreter diagnostic reliability (mean r = .56), with sorts for the 1/2/3 profile showing the highest inter-interpreter diagnostic reliability (mean r = .67). Second, do different CBTIs programs vary with respect to diagnostic suggestions? It was found that diagnostic sorts of the CBTIs had a mean inter-CBTI diagnostic reliability of r = .56, indicating moderate but not strong agreement across CBTIs in terms of diagnostic suggestions. The strongest inter-CBTI diagnostic agreement was found for sorts of the 1/2/3 profile CBTIs (mean r = .71). Limitations and future directions are discussed. PsycINFO Database Record (c) 2014 APA, all rights reserved.

  19. Learning styles: individualizing computer-based learning environments

    Directory of Open Access Journals (Sweden)

    Tim Musson

    1995-12-01

    Full Text Available While the need to adapt teaching to the needs of a student is generally acknowledged (see Corno and Snow, 1986, for a wide review of the literature, little is known about the impact of individual learner-differences on the quality of learning attained within computer-based learning environments (CBLEs. What evidence there is appears to support the notion that individual differences have implications for the degree of success or failure experienced by students (Ford and Ford, 1992 and by trainee end-users of software packages (Bostrom et al, 1990. The problem is to identify the way in which specific individual characteristics of a student interact with particular features of a CBLE, and how the interaction affects the quality of the resultant learning. Teaching in a CBLE is likely to require a subset of teaching strategies different from that subset appropriate to more traditional environments, and the use of a machine may elicit different behaviours from those normally arising in a classroom context.

  20. A Spread Willingness Computing-Based Information Dissemination Model

    Science.gov (United States)

    Cui, Zhiming; Zhang, Shukui

    2014-01-01

    This paper constructs a kind of spread willingness computing based on information dissemination model for social network. The model takes into account the impact of node degree and dissemination mechanism, combined with the complex network theory and dynamics of infectious diseases, and further establishes the dynamical evolution equations. Equations characterize the evolutionary relationship between different types of nodes with time. The spread willingness computing contains three factors which have impact on user's spread behavior: strength of the relationship between the nodes, views identity, and frequency of contact. Simulation results show that different degrees of nodes show the same trend in the network, and even if the degree of node is very small, there is likelihood of a large area of information dissemination. The weaker the relationship between nodes, the higher probability of views selection and the higher the frequency of contact with information so that information spreads rapidly and leads to a wide range of dissemination. As the dissemination probability and immune probability change, the speed of information dissemination is also changing accordingly. The studies meet social networking features and can help to master the behavior of users and understand and analyze characteristics of information dissemination in social network. PMID:25110738

  1. A spread willingness computing-based information dissemination model.

    Science.gov (United States)

    Huang, Haojing; Cui, Zhiming; Zhang, Shukui

    2014-01-01

    This paper constructs a kind of spread willingness computing based on information dissemination model for social network. The model takes into account the impact of node degree and dissemination mechanism, combined with the complex network theory and dynamics of infectious diseases, and further establishes the dynamical evolution equations. Equations characterize the evolutionary relationship between different types of nodes with time. The spread willingness computing contains three factors which have impact on user's spread behavior: strength of the relationship between the nodes, views identity, and frequency of contact. Simulation results show that different degrees of nodes show the same trend in the network, and even if the degree of node is very small, there is likelihood of a large area of information dissemination. The weaker the relationship between nodes, the higher probability of views selection and the higher the frequency of contact with information so that information spreads rapidly and leads to a wide range of dissemination. As the dissemination probability and immune probability change, the speed of information dissemination is also changing accordingly. The studies meet social networking features and can help to master the behavior of users and understand and analyze characteristics of information dissemination in social network.

  2. Computer Based Porosity Design by Multi Phase Topology Optimization

    Science.gov (United States)

    Burblies, Andreas; Busse, Matthias

    2008-02-01

    A numerical simulation technique called Multi Phase Topology Optimization (MPTO) based on finite element method has been developed and refined by Fraunhofer IFAM during the last five years. MPTO is able to determine the optimum distribution of two or more different materials in components under thermal and mechanical loads. The objective of optimization is to minimize the component's elastic energy. Conventional topology optimization methods which simulate adaptive bone mineralization have got the disadvantage that there is a continuous change of mass by growth processes. MPTO keeps all initial material concentrations and uses methods adapted from molecular dynamics to find energy minimum. Applying MPTO to mechanically loaded components with a high number of different material densities, the optimization results show graded and sometimes anisotropic porosity distributions which are very similar to natural bone structures. Now it is possible to design the macro- and microstructure of a mechanical component in one step. Computer based porosity design structures can be manufactured by new Rapid Prototyping technologies. Fraunhofer IFAM has applied successfully 3D-Printing and Selective Laser Sintering methods in order to produce very stiff light weight components with graded porosities calculated by MPTO.

  3. Computer-based mechanical design of overhead lines

    Science.gov (United States)

    Rusinaru, D.; Bratu, C.; Dinu, R. C.; Manescu, L. G.

    2016-02-01

    Beside the performance, the safety level according to the actual standards is a compulsory condition for distribution grids’ operation. Some of the measures leading to improvement of the overhead lines reliability ask for installations’ modernization. The constraints imposed to the new lines components refer to the technical aspects as thermal stress or voltage drop, and look for economic efficiency, too. The mechanical sizing of the overhead lines is after all an optimization problem. More precisely, the task in designing of the overhead line profile is to size poles, cross-arms and stays and locate poles along a line route so that the total costs of the line's structure to be minimized and the technical and safety constraints to be fulfilled.The authors present in this paper an application for the Computer-Based Mechanical Design of the Overhead Lines and the features of the corresponding Visual Basic program, adjusted to the distribution lines. The constraints of the optimization problem are adjusted to the existing weather and loading conditions of Romania. The outputs of the software application for mechanical design of overhead lines are: the list of components chosen for the line: poles, cross-arms, stays; the list of conductor tension and forces for each pole, cross-arm and stay for different weather conditions; the line profile drawings.The main features of the mechanical overhead lines design software are interactivity, local optimization function and high-level user-interface

  4. A Spread Willingness Computing-Based Information Dissemination Model

    Directory of Open Access Journals (Sweden)

    Haojing Huang

    2014-01-01

    Full Text Available This paper constructs a kind of spread willingness computing based on information dissemination model for social network. The model takes into account the impact of node degree and dissemination mechanism, combined with the complex network theory and dynamics of infectious diseases, and further establishes the dynamical evolution equations. Equations characterize the evolutionary relationship between different types of nodes with time. The spread willingness computing contains three factors which have impact on user’s spread behavior: strength of the relationship between the nodes, views identity, and frequency of contact. Simulation results show that different degrees of nodes show the same trend in the network, and even if the degree of node is very small, there is likelihood of a large area of information dissemination. The weaker the relationship between nodes, the higher probability of views selection and the higher the frequency of contact with information so that information spreads rapidly and leads to a wide range of dissemination. As the dissemination probability and immune probability change, the speed of information dissemination is also changing accordingly. The studies meet social networking features and can help to master the behavior of users and understand and analyze characteristics of information dissemination in social network.

  5. IMPACT OF COMPUTER BASED ONLINE ENTREPRENEURSHIP DISTANCE EDUCATION IN INDIA

    Directory of Open Access Journals (Sweden)

    Bhagwan SHREE RAM

    2012-07-01

    Full Text Available The success of Indian enterprises and professionals in the computer and information technology (CIT domain during the twenty year has been spectacular. Entrepreneurs, bureaucrats and technocrats are now advancing views about how India can ride CIT bandwagon and leapfrog into a knowledge-based economy in the area of entrepreneurship distance education on-line. Isolated instances of remotely located villagers sending and receiving email messages, effective application of mobile communications and surfing the Internet are being promoted as examples of how the nation can achieve this transformation, while vanquishing socio-economic challenges such as illiteracy, high growth of population, poverty, and the digital divide along the way. Likewise, even while a small fraction of the urban population in India has access to computers and the Internet, e-governance is being projected as the way of the future. There is no dearth of fascinating stories about CIT enabled changes, yet there is little discussion about whether such changes are effective and sustainable in the absence of the basic infrastructure that is accessible to the citizens of more advanced economies. When used appropriately, different CITs are said to help expand access to entrepreneurship distance education, strengthen the relevance of education to the increasingly digital workplace, and raise technical and managerial educational quality by, among others, helping make teaching and learning into an engaging, active process connected to real life. This research paper investigates on the impact of computer based online entrepreneurship distance education in India.

  6. Studies of natural analogues and geological systems. Their importance to performance assessment

    International Nuclear Information System (INIS)

    Brandberg, F.; Grundfelt, B.; Hoeglund, L.O.; Skagius, K.; Karlsson, Fred; Smellie, J.

    1992-04-01

    This review has involved studies of natural analogues and natural geological systems leading to the identification and quantification of processes and features of importance to the performance and safety of repositories for radioactive waste. The features and processes selected for the study comprise general geochemical issues related to the performance of the near- and of the far-field, the performance and durability of construction materials and the effects of glaciation. For each of these areas a number of potentially important processes for repository performance have been described, and evidence for their existence, as well as quantification of parameters of models describing the processes, have been sought from major natural analogue studies and site investigations. The review has aimed at covering a relatively broad range of issues at the expense of in-depth analysis. The quantitative data presented are in most cases compilations of data from the literature; in a few cases results of evaluations made within the current project are included. The results of the study show that studies of natural analogues and natural geological systems have provided significant information regarding many issues of importance to repository performance. In several cases the evidence from natural analogues has demonstrated that processes assumed to take place in repositories actually occur in natural systems or under conditions similar to those predicted to prevail in a future repository. One example of such a process is coprecipitation of fission products and ferric oxyhydroxides as an analogue to corrosion products from a steel canister. In addition, the study of concentration gradients of uranium and other trace substances in the rock surrounding groundwater conduits confirm that matrix diffusion occurs in nature and that the diffusivities in the rock matrix measured in the laboratory are consistent with the observations in nature

  7. Land destruction and redevelopment - the use of computer based landscape evolution models for post-mining landscape reconstruction

    Science.gov (United States)

    Hancock, Greg; Willgoose, Garry

    2017-04-01

    Mining provides essential resources for the global economy as well as considerable employment and economic benefits for the community. Mining is necessary for the modern economy. However, in recent decades the scale and environmental impact of mining has grown in line with the global demand for resources. This requires ever increasing areas of land to be disturbed. In particular, open-cast mining removes topsoil, disrupts aquifers and removes uneconomic material to depths of many hundreds of metres. Post-mining, this highly disturbed landscape system requires rehabilitation. The first and most important component of this process is to construct an erosionally stable landform which then can ecologically integrate with the surrounding undisturbed landscape. The scale and importance of this process cannot be overstated as without planned rehabilitation it is likely that a degraded and highly erosional landscape system with result. Here we discuss computer based landform evolution models which provide essential information on the likely erosional stability of the reconstructed landscape. These models use a digital elevation model to represent the landscape and dynamically adjusts the surface in response to erosion and deposition. They provide information on soil erosion rates at the storm event time scale through to annual time scales. The models can also be run to assess landscape evolution at millennial time scales. They also provide information on the type of erosion (i.e. rilling, gullying) and likely gully depths (and if they will occur). Importantly, the latest models have vegetation, armouring and pedogenesis submodels incorporated into their formulation. This allows both the surface and subsurface landscape evolution to be assessed. These models have been widely used and have huge benefits for the assessment of reconstructed landscapes as well as other disturbed landscape systems. Here we outline the state of the art.

  8. Perceptron-like computation based on biologically-inspired neurons with heterosynaptic mechanisms

    Science.gov (United States)

    Kaluza, Pablo; Urdapilleta, Eugenio

    2014-10-01

    Perceptrons are one of the fundamental paradigms in artificial neural networks and a key processing scheme in supervised classification tasks. However, the algorithm they provide is given in terms of unrealistically simple processing units and connections and therefore, its implementation in real neural networks is hard to be fulfilled. In this work, we present a neural circuit able to perform perceptron's computation based on realistic models of neurons and synapses. The model uses Wang-Buzsáki neurons with coupling provided by axodendritic and axoaxonic synapses (heterosynapsis). The main characteristics of the feedforward perceptron operation are conserved, which allows to combine both approaches: whereas the classical artificial system can be used to learn a particular problem, its solution can be directly implemented in this neural circuit. As a result, we propose a biologically-inspired system able to work appropriately in a wide range of frequencies and system parameters, while keeping robust to noise and error.

  9. Beyond the computer-based patient record: re-engineering with a vision.

    Science.gov (United States)

    Genn, B; Geukers, L

    1995-01-01

    In order to achieve real benefit from the potential offered by a Computer-Based Patient Record, the capabilities of the technology must be applied along with true re-engineering of healthcare delivery processes. University Hospital recognizes this and is using systems implementation projects, such as the catalyst, for transforming the way we care for our patients. Integration is fundamental to the success of these initiatives and this must be explicitly planned against an organized systems architecture whose standards are market-driven. University Hospital also recognizes that Community Health Information Networks will offer improved quality of patient care at a reduced overall cost to the system. All of these implementation factors are considered up front as the hospital makes its initial decisions on to how to computerize its patient records. This improves our chances for success and will provide a consistent vision to guide the hospital's development of new and better patient care.

  10. An improved, computer-based, on-line gamma monitor for plutonium anion exchange process control

    International Nuclear Information System (INIS)

    Pope, N.G.; Marsh, S.F.

    1987-06-01

    An improved, low-cost, computer-based system has replaced a previously developed on-line gamma monitor. Both instruments continuously profile uranium, plutonium, and americium in the nitrate anion exchange process used to recover and purify plutonium at the Los Alamos Plutonium Facility. The latest system incorporates a personal computer that provides full-feature multichannel analyzer (MCA) capabilities by means of a single-slot, plug-in integrated circuit board. In addition to controlling all MCA functions, the computer program continuously corrects for gain shift and performs all other data processing functions. This Plutonium Recovery Operations Gamma Ray Energy Spectrometer System (PROGRESS) provides on-line process operational data essential for efficient operation. By identifying abnormal conditions in real time, it allows operators to take corrective actions promptly. The decision-making capability of the computer will be of increasing value as we implement automated process-control functions in the future. 4 refs., 6 figs

  11. A computer based I and C to improve nuclear power plant operation and safety

    International Nuclear Information System (INIS)

    Appell, Bernard; Beltranda, Guy

    1995-01-01

    Chooz B1 is the head of 1400 MW N4 series (up to now, a programme of 4 identical units have been ordered) will be put on the French national grid this year (1995). Hot tests were performed last autumn. Loading fuel is scheduled in June 95. Chooz B2 will follow 6 months later. This nuclear power plant series is fully French designed. It comprises, compared to the former 1300 MW series, evolution concerning mainly the turbine, the steam generators, the primary pumps, the I and C and the man machine interface. A major improvement for the plant operation and safety is the computerised I and C which comprises the protection system (specific controllers), the process automation system (off the shelf equipment), the computer based and conventional man machine interfaces associated. These systems were put in service last year. This paper is focused on them. (author)

  12. Water and Climate Impacts on Power System Operations: The Importance of Cooling Systems and Demand Response Measures

    Energy Technology Data Exchange (ETDEWEB)

    Macknick, Jordan [National Renewable Energy Lab. (NREL), Golden, CO (United States); Zhou, Ella [National Renewable Energy Lab. (NREL), Golden, CO (United States); O' Connell, Matthew [National Renewable Energy Lab. (NREL), Golden, CO (United States); Brinkman, Gregory [National Renewable Energy Lab. (NREL), Golden, CO (United States); Miara, Ariel [City College of New York, NY (United States); Ibanez, Eduardo [GE Energy Connections, Atlanta, GA (United States); Hummon, Marissa [Tendril, Denver, CO (United States)

    2016-12-01

    The U.S. electricity sector is highly dependent upon water resources; changes in water temperatures and water availability can affect operational costs and the reliability of power systems. Despite the importance of water for power system operations, the effects of changes in water characteristics on multiple generators in a system are generally not modeled. Moreover, demand response measures, which can change the magnitude and timing of loads and can have beneficial impacts on power system operations, have not yet been evaluated in the context of water-related power vulnerabilities. This effort provides a first comprehensive vulnerability and cost analysis of water-related impacts on a modeled power system and the potential for demand response measures to address vulnerability and cost concerns. This study uniquely combines outputs and inputs of a water and power plant system model, production cost, model, and relative capacity value model to look at variations in cooling systems, policy-related thermal curtailments, and demand response measures to characterize costs and vulnerability for a test system. Twenty-five scenarios over the course of one year are considered: a baseline scenario as well as a suite of scenarios to evaluate six cooling system combinations, the inclusion or exclusion of policy-related thermal curtailments, and the inclusion or exclusion of demand response measures. A water and power plant system model is utilized to identify changes in power plant efficiencies resulting from ambient conditions, a production cost model operating at an hourly scale is used to calculate generation technology dispatch and costs, and a relative capacity value model is used to evaluate expected loss of carrying capacity for the test system.

  13. Transacting generation attributes across market boundaries: Compatible information systems and the treatment of imports and exports

    Energy Technology Data Exchange (ETDEWEB)

    Grace, Robert; Wiser, Ryan

    2002-11-01

    Voluntary markets for ''green'' power, and mandatory policies such as fuel source disclosure requirements and renewables portfolio standards, each rely on the ability to differentiate electricity by the ''attributes'' of the generation. Throughout North America, electricity markets are devising accounting and verification systems for generation ''attributes'': those characteristics of a power plant's production such as fuel source and emissions that differentiate it from undifferentiated (or ''commodity'') electricity. These accounting and verification systems are intended to verify compliance with market mandates, create accurate disclosure labels, substantiate green power claims, and support emissions markets. Simultaneously, interest is growing in transacting (importing or exporting) generation attributes across electricity market borders, with or without associated electricity. Cross-border renewable attribute transactions have advantages and disadvantages. Broad access to markets may encourage more renewable generation at lower cost, but this result may conflict with desires to assure that at least some renewable resources are built locally to achieve either local policy goals or purchaser objectives. This report is intended to serve as a resource document for those interested in and struggling with cross-border renewable attribute transactions. The report assesses the circumstances under which renewable generation attributes from a ''source'' region might be recognized in a ''sink'' region. The report identifies several distinct approaches that might be used to account for and verify attribute import and export transactions, and assesses the suitability of these alternative approaches. Because policymakers have often made systems ''compatibility'' between market areas a pre-requisite to allowing cross

  14. The importance of systemic response in the pathobiology of blast-induced neurotrauma

    Directory of Open Access Journals (Sweden)

    Ibolja eCernak

    2010-12-01

    Full Text Available Due to complex injurious environment where multiple blast effects interact with the body, parallel blast-induced neurotrauma is a unique clinical entity induced by systemic, local, and cerebral responses. Activation of autonomous nervous system; sudden pressure-increase in vital organs such as lungs and liver; and activation of neuroendocrine-immune system are among the most important mechanisms that contribute significantly to molecular changes and cascading injury mechanisms in the brain. It has been hypothesized that vagally mediated cerebral effects play a vital role in the early response to blast: this assumption has been supported by experiments where bilateral vagotomy mitigated bradycardia, hypotension, and apnea, and also prevented excessive metabolic alterations in the brain of animals exposed to blast. Clinical experience suggests specific blast-body-nervous system interactions such as 1 direct interaction with the head either through direct passage of the blast wave through the skull or by causing acceleration and/or rotation of the head; and 2 via hydraulic interaction, when the blast overpressure compresses the abdomen and chest, and transfers its kinetic energy to the body’s fluid phase, initiating oscillating waves that traverse the body and reach the brain. Accumulating evidence suggests that inflammation plays important role in the pathogenesis of long-term neurological deficits due to blast. These include memory decline, motor function and balance impairments, and behavioral alterations, among others. Experiments using rigid body- or head protection in animals subjected to blast showed that head protection failed to prevent inflammation in the brain or reduce neurological deficits, whereas body protection was successful in alleviating the blast-induced functional and morphological impairments in the brain.

  15. The importance of simulation facilities for the development of review criteria for advanced human system interfaces

    International Nuclear Information System (INIS)

    O'Hara, J.M.; Wachtel, J.

    1994-01-01

    Advanced control room (ACR) concepts are being developed in the commercial nuclear industry as part of future reactor designs. The ACRs will use advanced human-system interface (HSI) technologies that may have significant implications for plant safety in that they will affect the operator's overall role (function) in the system, the method of information presentation, the ways in which the operator interacts with the system, and the requirements on the operator to understand and supervise an increasingly complex system. The U.S. Nuclear Regulatory Commission (NRC) reviews the HSI aspects of control rooms to ensure that they are designed to good human factors engineering principles and that operator performance and reliability are appropriately supported to protect public health and safety. The NRC is developing guidelines to support their review of these advanced designs. As part of this effort, a methodology for guidance development was established, and topics in need of further research were identified. Simulators of various kinds are likely to play important roles in the development of review guidelines and in the evaluation of ACRs. This paper describes a general approach to review criteria development, and discusses the role of simulators in addressing research needs

  16. A six step approach for developing computer based assessment in medical education.

    Science.gov (United States)

    Hassanien, Mohammed Ahmed; Al-Hayani, Abdulmoneam; Abu-Kamer, Rasha; Almazrooa, Adnan

    2013-01-01

    Assessment, which entails the systematic evaluation of student learning, is an integral part of any educational process. Computer-based assessment (CBA) techniques provide a valuable resource to students seeking to evaluate their academic progress through instantaneous, personalized feedback. CBA reduces examination, grading and reviewing workloads and facilitates training. This paper describes a six step approach for developing CBA in higher education and evaluates student perceptions of computer-based summative assessment at the College of Medicine, King Abdulaziz University. A set of questionnaires were distributed to 341 third year medical students (161 female and 180 male) immediately after examinations in order to assess the adequacy of the system for the exam program. The respondents expressed high satisfaction with the first Saudi experience of CBA for final examinations. However, about 50% of them preferred the use of a pilot CBA before its formal application; hence, many did not recommend its use for future examinations. Both male and female respondents reported that the range of advantages offered by CBA outweighed any disadvantages. Further studies are required to monitor the extended employment of CBA technology for larger classes and for a variety of subjects at universities.

  17. Identification of structures, systems, and components important to safety at the potential repository at Yucca Mountain

    International Nuclear Information System (INIS)

    Hartman, D.J.; Miller, D.D.; Klamerus, L.J.

    1991-10-01

    This study recommends which structures, systems, and components of the potential repository at Yucca Mountain are important to safety. The assessment was completed in April 1990 and uses the reference repository configuration in the Site Characterization Plan Conceptual Design Report and follows the methodology required at that time by DOE Procedure AP6.10-Q. Failures of repository items during the preclosure period are evaluated to determine the potential offsite radiation doses and associated probabilities. Items are important to safety if, in the event they fail to perform their intended function, an accident could result which causes a dose commitment greater than 0.5 rem to the whole body or any organ of an individual in an unrestricted area. This study recommends that these repository items include the structures that house spent fuel and high-level waste, the associated filtered ventilation exhaust systems, certain waste- handling equipment, the waste containers, the waste treatment building structure, the underground waste transporters, and other items listed in this report. This work was completed April 1990. 27 refs., 7 figs., 9 tabs

  18. Relative Importance of Chemoautotrophy for Primary Production in a Light Exposed Marine Shallow Hydrothermal System

    Directory of Open Access Journals (Sweden)

    Gonzalo V. Gomez-Saez

    2017-04-01

    Full Text Available The unique geochemistry of marine shallow-water hydrothermal systems promotes the establishment of diverse microbial communities with a range of metabolic pathways. In contrast to deep-sea vents, shallow-water vents not only support chemosynthesis, but also phototrophic primary production due to the availability of light. However, comprehensive studies targeting the predominant biogeochemical processes are rare, and consequently a holistic understanding of the functioning of these ecosystems is currently lacking. To this end, we combined stable isotope probing of lipid biomarkers with an analysis of the bacterial communities to investigate if chemoautotrophy, in parallel to photoautotrophy, plays an important role in autotrophic carbon fixation and to identify the key players. The study was carried out at a marine shallow-water hydrothermal system located at 5 m water depth off Dominica Island (Lesser Antilles, characterized by up to 55°C warm hydrothermal fluids that contain high amounts of dissolved Fe2+. Analysis of the bacterial diversity revealed Anaerolineae of the Chloroflexi as the most abundant bacterial class. Furthermore, the presence of key players involved in iron cycling generally known from deep-sea hydrothermal vents (e.g., Zetaproteobacteria and Geothermobacter, supported the importance of iron-driven redox processes in this hydrothermal system. Uptake of 13C-bicarbonate into bacterial fatty acids under light and dark conditions revealed active photo- and chemoautotrophic communities, with chemoautotrophy accounting for up to 65% of the observed autotrophic carbon fixation. Relatively increased 13C-incorporation in the dark allowed the classification of aiC15:0, C15:0, and iC16:0 as potential lipid biomarkers for bacterial chemoautotrophy in this ecosystem. Highest total 13C-incorporation into fatty acids took place at the sediment surface, but chemosynthesis was found to be active down to 8 cm sediment depth. In conclusion

  19. The provision of feedback through computer-based technology to promote self-managed post-stroke rehabilitation in the home.

    Science.gov (United States)

    Parker, Jack; Mawson, Susan; Mountain, Gail; Nasr, Nasrin; Davies, Richard; Zheng, Huiru

    2014-11-01

    Building on previous research findings, this article describes the development of the feedback interfaces for a Personalised Self-Managed Rehabilitation System (PSMrS) for home-based post-stroke rehabilitation using computer-based technology. Embedded within a realistic evaluative methodological approach, the development of the feedback interfaces for the PSMrS involved the incorporation of existing and emerging theories and a hybrid of health and social sciences research and user-centred design methods. User testing confirmed that extrinsic feedback for home-based post-stroke rehabilitation through computer-based technology needs to be personalisable, accurate, rewarding and measurable. In addition, user testing also confirmed the feasibility of using specific components of the PSMrS. A number of key elements are crucial for the development and potential utilisation of technology in what is an inevitable shift towards the use of innovative methods of delivering post-stroke rehabilitation. This includes the specific elements that are essential for the promotion of self-managed rehabilitation and rehabilitative behaviour change; the impact of the context on the mechanisms; and, importantly, the need for reliability and accuracy of the technology.

  20. On the relative importance of loads acting on a floating verticalaxis wind turbine system when evaluating the global system response

    DEFF Research Database (Denmark)

    Collu, Maurizio; Borg, Michael; Manuel, Lance

    2016-01-01

    of the VAWT aerodynamic forces, the platform hydrodynamic forces, and the mooring forces. The results help evaluate the relative importance of hydrodynamic with respect to aerodynamic forces, depending on the loading condition. A deeper insight into the aerodynamic forces is provided, which shows the impact...... their potential advantages. Due to the substantial differences between HAWT and VAWT systems, analysis procedures employed for a floating HAWT analyses cannot be extended to use for floating VAWT systems. Here, the main aim is to provide a systematic analysis and comparison of the forces acting on a reference...... by the OC4-Phase II semisubmersible. Using the coupled model of dynamics for VAWT "FloVAWT", the global response of the system is estimated for a set of load cases, allowing the assessment of the contributions of individual force components. In particular, the simulations allow us to assess the impact...

  1. The importance of correct specification of tribological parameters in dynamical systems modelling

    Science.gov (United States)

    Alaci, S.; Ciornei, F. C.; Romanu, I. C.; Ciornei, M. C.

    2018-01-01

    When modelling the behaviour of dynamical systems, the friction phenomenon cannot be neglected. Dry and fluid friction may occur, but dry friction has more severe effects upon the behaviour of the systems, based on the fact that the introduced discontinuities are more important. In the modelling of dynamical systems, dry friction is the main cause of occurrence of the bifurcation phenomenon. These aspects become more complex if, in the case of dry friction, static and dynamic frictions are put forward. The behaviour of a simple dynamical system is studied, consisting in a prismatic body linked to the ground by a spring, placed on a conveyor belt. The theoretical model is described by a nonlinear differential equation which after numerical integration leads to the conclusion that the steady motion of the prism is an un-damped oscillatory motion. The system was qualitatively modelled using specialised software for dynamical analysis. It was impractical to obtain a steady uniform translational motion of a rigid, therefore the conveyor belt was replaced by a metallic disc in uniform rotation motion. The attempts to compare the CAD model to the theoretical model were unsuccessful because the efforts of selecting the tribological parameters directed to the conclusion that the motion of the prism is a damped oscillation. To decide which of the methods depicts reality, a test-rig was assembled and it indicated a sustained oscillation. The conclusion is that the model employed by the dynamical analysis software cannot describe the actual model and a more complex model is required in the description of the friction phenomenon.

  2. A computer-based measure of resultant achievement motivation.

    Science.gov (United States)

    Blankenship, V

    1987-08-01

    Three experiments were conducted to develop a computer-based measure of individual differences in resultant achievement motivation (RAM) on the basis of level-of-aspiration, achievement motivation, and dynamics-of-action theories. In Experiment 1, the number of atypical shifts and greater responsiveness to incentives on 21 trials with choices among easy, intermediate, and difficult levels of an achievement-oriented game were positively correlated and were found to differentiate the 62 subjects (31 men, 31 women) on the amount of time they spent at a nonachievement task (watching a color design) 1 week later. In Experiment 2, test-retest reliability was established with the use of 67 subjects (15 men, 52 women). Point and no-point trials were offered in blocks, with point trials first for half the subjects and no-point trials first for the other half. Reliability was higher for the atypical-shift measure than for the incentive-responsiveness measure and was higher when points were offered first. In Experiment 3, computer anxiety was manipulated by creating a simulated computer breakdown in the experimental condition. Fifty-nine subjects (13 men, 46 women) were randomly assigned to the experimental condition or to one of two control conditions (an interruption condition and a no-interruption condition). Subjects with low RAM, as demonstrated by a low number of typical shifts, took longer to choose the achievement-oriented task, as predicted by the dynamics-of-action theory. The difference was evident in all conditions and most striking in the computer-breakdown condition. A change of focus from atypical to typical shifts is discussed.

  3. Learners’ views about cloud computing-based group activities

    Directory of Open Access Journals (Sweden)

    Yildirim Serkan

    2017-01-01

    Full Text Available Thanks to its use independently of time and place during the process of software development and by making it easier to access to information with mobile technologies, cloud based environments attracted the attention of education world and this technology started to be used in various activities. In this study, for programming education, the effects of extracurricular group assignments in cloud based environments on learners were evaluated in terms of group work satisfaction, ease of use and user satisfaction. Within the scope of computer programming education lasting eight weeks, a total of 100 students participated in the study including 34 men and 66 women. Participants were divided into groups of at least three people considering the advantages of cooperative learning in programming education. In this study carried out in both conventional and cloud based environments, between groups factorial design was used as research design. The data collected by questionnaires of opinions of group work were examined with quantitative analysis method. According to the study results extracurricular learning activities as group activity created satisfaction. However, perceptions of easy use of the environment and user satisfaction were partly positive. Despite the similar understandings; male participants were easier to perceive use of cloud computing based environments. Some variables such as class level, satisfaction, computer and internet usage time do not have any effect on satisfaction and perceptions of ease of use. Evening class students stated that they found it easy to use cloud based learning environments and became more satisfied with using these environments besides being happier with group work than daytime students.

  4. Improving Patient Satisfaction Through Computer-Based Questionnaires.

    Science.gov (United States)

    Smith, Matthew J; Reiter, Michael J; Crist, Brett D; Schultz, Loren G; Choma, Theodore J

    2016-01-01

    Patient-reported outcome measures are helping clinicians to use evidence-based medicine in decision making. The use of computer-based questionnaires to gather such data may offer advantages over traditional paper-based methods. These advantages include consistent presentation, prompts for missed questions, reliable scoring, and simple and accurate transfer of information into databases without manual data entry. The authors enrolled 308 patients over a 16-month period from 3 orthopedic clinics: spine, upper extremity, and trauma. Patients were randomized to complete either electronic or paper validated outcome forms during their first visit, and they completed the opposite modality at their second visit, which was approximately 7 weeks later. For patients with upper-extremity injuries, the Penn Shoulder Score (PSS) was used. For patients with lower-extremity injuries, the Foot Function Index (FFI) was used. For patients with lumbar spine symptoms, the Oswestry Disability Index (ODI) was used. All patients also were asked to complete the 36-Item Short Form Health Survey (SF-36) Health Status Survey, version 1. The authors assessed patient satisfaction with each survey modality and determined potential advantages and disadvantages for each. No statistically significant differences were found between the paper and electronic versions for patient-reported outcome data. However, patients strongly preferred the electronic surveys. Additionally, the paper forms had significantly more missed questions for the FFI (P<.0001), ODI (P<.0001), and PSS (P=.008), and patents were significantly less likely to complete these forms (P<.0001). Future research should focus on limiting the burden on responders, individualizing forms and questions as much as possible, and offering alternative environments for completion (home or mobile platforms). Copyright 2016, SLACK Incorporated.

  5. The coffee agroforestry system. Its importance for the agro-alimentary and nutritional security in Ecuador

    Directory of Open Access Journals (Sweden)

    Luciano Abelardo Ponce Vaca

    2018-01-01

    Full Text Available In the context of coffee growing, Ecuador is characterized by planting two main commercial species of Coffea arabica L. (Arabica coffee, and Coffea canephora Pierre ex Froehner (Robusta coffee, where small production units and agroforestry systems predominate. To overcome the low national production, which constitutes the central problem of coffee growing in the country, the Ministry of Agriculture and Livestock of Ecuador, promoted the project «Reactivation of the Ecuadorian coffee industry», which contributes to food security and nutrition with integral approach. In these circumstances, the objective of this paper is to analyze the importance of coffee agroforestry systems for agro-alimentary and nutritional security in Ecuador. The proposal is born from the agro-economic diagnosis «case study», from the situation of the Coffee Production Units, from the Association of Peasants «Juntos Lucharemos» from the La Unión parish of the Jipijapa county, province of Manabí, in which they settled Main contributions to the agro-alimentary and nutritional security coming from the coffee agroforestry systems, this allowed to analyze characteristics related to the object of study. Based on the research results, gaps in national consumption needs were detected. This proposal contributed to articulate and promote the reactivation of coffee growing on agroecological bases, in harmony with the dimensions of sustainability in order to protect and conserve biodiversity and the coffee forest.

  6. THE CODE OF THE STREET AND INMATE VIOLENCE: INVESTIGATING THE SALIENCE OF IMPORTED BELIEF SYSTEMS*

    Science.gov (United States)

    MEARS, DANIEL P.; STEWART, ERIC A.; SIENNICK, SONJA E.; SIMONS, RONALD L.

    2013-01-01

    Scholars have long argued that inmate behaviors stem in part from cultural belief systems that they “import” with them into incarcerative settings. Even so, few empirical assessments have tested this argument directly. Drawing on theoretical accounts of one such set of beliefs—the code of the street—and on importation theory, we hypothesize that individuals who adhere more strongly to the street code will be more likely, once incarcerated, to engage in violent behavior and that this effect will be amplified by such incarceration experiences as disciplinary sanctions and gang involvement, as well as the lack of educational programming, religious programming, and family support. We test these hypotheses using unique data that include measures of the street code belief system and incarceration experiences. The results support the argument that the code of the street belief system affects inmate violence and that the effect is more pronounced among inmates who lack family support, experience disciplinary sanctions, and are gang involved. Implications of these findings are discussed. PMID:24068837

  7. Tritium interactions of potential importance to fusion reactor systems: technology requirements

    International Nuclear Information System (INIS)

    Wilkes, W.R.

    1976-01-01

    The tritium technology requirements created by the controlled thermonuclear research program to develop a demonstration fusion power reactor by the year 2000 are reviewed. It is found that the majority of the technological advances which are needed to ensure adequate tritium containment in a tritium breeding power reactor need to be demonstrated on a pilot scale by approximately 1983, so that they may be incorporated into EPR-II, the second of two planned experimental power reactors. The most important advances include development of containment materials with permeabilities to tritium well below measured values for stainless steel; large scale, low inventory deuterium-tritium separation systems; and improved monitoring and assay systems. There are less critical requirements for information about the effects of tritium and helium on the mechanical properties of materials, the effects of tritium on biological systems, and data on physical and chemical properties of tritium. Substantial progress needs to be made on these problems early enough to permit possible solutions to be tested on EPR-I. In addition, major improvements in tritium handling equipment are required for EPR-I. Those technological problems for which solutions have not yet been demonstrated by EPR-II must be solved by 1989 if they are to be assured successful application in the demonstration reactor

  8. Importance of adaptation and genotype × environment interactions in tropical beef breeding systems.

    Science.gov (United States)

    Burrow, H M

    2012-05-01

    This paper examines the relative importance of productive and adaptive traits in beef breeding systems based on Bos taurus and tropically adapted breeds across temperate and (sub)tropical environments. In the (sub)tropics, differences that exist between breeds in temperate environments are masked by the effects of environmental stressors. Hence in tropical environments, breeds are best categorised into breed types to compare their performance across environments. Because of the presence of environmental stressors, there are more sources of genetic variation in tropical breeding programmes. It is therefore necessary to examine the genetic basis of productive and adaptive traits for breeding programmes in those environments. This paper reviews the heritabilities and genetic relationships between economically important productive and adaptive traits relevant to (sub)tropical breeding programmes. It is concluded that it is possible to simultaneously genetically improve productive and adaptive traits in tropically adapted breeds of beef cattle grazed in tropical environments without serious detrimental consequences for either adaptation or production. However, breed-specific parameters are required for genetic evaluations. The paper also reviews the magnitude of genotype × environment (G × E) interactions impacting on production and adaptation of cattle, where 'genotype' is defined as breed (within a crossbreeding system), sire within breed (in a within-breed selection programme) or associations between economically important traits and single nucleotide polymorphisms (SNPs - within a marker-assisted selection programme). It is concluded that re-ranking of breeds across environments is best managed by the use of the breed type(s) best suited to the particular production environment. Re-ranking of sires across environments is apparent in poorly adapted breed types across extreme tropical and temperate environments or where breeding animals are selected in a temperate

  9. Stroke patients' utilisation of extrinsic feedback from computer-based technology in the home: a multiple case study realistic evaluation.

    Science.gov (United States)

    Parker, Jack; Mawson, Susan; Mountain, Gail; Nasr, Nasrin; Zheng, Huiru

    2014-06-05

    Evidence indicates that post-stroke rehabilitation improves function, independence and quality of life. A key aspect of rehabilitation is the provision of appropriate information and feedback to the learner.Advances in information and communications technology (ICT) have allowed for the development of various systems to complement stroke rehabilitation that could be used in the home setting. These systems may increase the provision of rehabilitation a stroke survivor receives and carries out, as well as providing a learning platform that facilitates long-term self-managed rehabilitation and behaviour change. This paper describes the application of an innovative evaluative methodology to explore the utilisation of feedback for post-stroke upper-limb rehabilitation in the home. Using the principles of realistic evaluation, this study aimed to test and refine intervention theories by exploring the complex interactions of contexts, mechanisms and outcomes that arise from technology deployment in the home. Methods included focus groups followed by multi-method case studies (n = 5) before, during and after the use of computer-based equipment. Data were analysed in relation to the context-mechanism-outcome hypotheses case by case. This was followed by a synthesis of the findings to answer the question, 'what works for whom and in what circumstances and respects?' Data analysis reveals that to achieve desired outcomes through the use of ICT, key elements of computer feedback, such as accuracy, measurability, rewarding feedback, adaptability, and knowledge of results feedback, are required to trigger the theory-driven mechanisms underpinning the intervention. In addition, the pre-existing context and the personal and environmental contexts, such as previous experience of service delivery, personal goals, trust in the technology, and social circumstances may also enable or constrain the underpinning theory-driven mechanisms. Findings suggest that the theory-driven mechanisms

  10. On the importance of risk knowledge for an end-to-end tsunami early warning system

    Science.gov (United States)

    Post, Joachim; Strunz, Günter; Riedlinger, Torsten; Mück, Matthias; Wegscheider, Stephanie; Zosseder, Kai; Steinmetz, Tilmann; Gebert, Niklas; Anwar, Herryal

    2010-05-01

    Warning systems commonly use information provided by networks of sensors able to monitor and detect impending disasters, aggregate and condense these information to provide reliable information to a decision maker whether to warn or not, disseminates the warning message and provide this information to people at risk. Ultimate aim is to enable those in danger to make decisions (e.g. initiate protective actions for buildings) and to take action to safe their lives. This involves very complex issues when considering all four elements of early warning systems (UNISDR-PPEW), namely (1) risk knowledge, (2) monitoring and warning service, (3) dissemination and communication, (4) response capability with the ultimate aim to gain as much time as possible to empower individuals and communities to act in an appropriate manner to reduce injury, loss of life, damage to property and the environment and loss of livelihoods. Commonly most warning systems feature strengths and main attention on the technical/structural dimension (monitoring & warning service, dissemination tools) with weaknesses and less attention on social/cultural dimension (e.g. human response capabilities, defined warning chain to and knowing what to do by the people). Also, the use of risk knowledge in early warning most often is treated in a theoretical manner (knowing that it is somehow important), yet less in an operational, practical sense. Risk assessments and risk maps help to motivate people, prioritise early warning system needs and guide preparations for response and disaster prevention activities. Beyond this risk knowledge can be seen as a tie between national level early warning and community level reaction schemes. This presentation focuses on results, key findings and lessons-learnt related to tsunami risk assessment in the context of early warning within the GITEWS (German-Indonesian Tsunami Early Warning) project. Here a novel methodology reflecting risk information needs in the early warning

  11. Unraveling the Importance of Climate Change Resilience in Planning the Future Sustainable Energy System

    Science.gov (United States)

    Tarroja, B.; AghaKouchak, A.; Forrest, K.; Chiang, F.; Samuelsen, S.

    2017-12-01

    In response to concerns regarding the environmental impacts of the current energy resource mix, significant research efforts have been focused on determining the future energy resource mix to meet emissions reduction and environmental sustainability goals. Many of these studies focus on various constraints such as costs, grid operability requirements, and environmental performance, and develop different plans for the rollout of energy resources between the present and future years. One aspect that has not yet been systematically taken into account in these planning studies, however, is the potential impacts that changing climates may have on the availability and performance of key energy resources that compose these plans. This presentation will focus on a case study for California which analyzes the impacts of climate change on the greenhouse gas emissions and renewable resource utilization of an energy resource plan developed by Energy Environmental Economics for meeting the state's year 2050 greenhouse gas goal of 80% reduction in emissions by the year 2050. Specifically, climate change impacts on three aspects of the energy system are investigated: 1) changes in hydropower generation due to altered precipitation, streamflow and runoff patterns, 2) changes in the availability of solar thermal and geothermal power plant capacity due to shifting water availability, and 3) changes in the residential and commercial electric building loads due to increased temperatures. These impacts were discovered to cause the proposed resource plan to deviate from meeting its emissions target by up to 5.9 MMT CO2e/yr and exhibit a reduction in renewable resource penetration of up to 3.1% of total electric energy. The impacts of climate change on energy system performance were found to be mitigated by increasing the flexibility of the energy system through increased storage and electric load dispatchability. Overall, this study highlights the importance of taking into account and

  12. Estimation variance bounds of importance sampling simulations in digital communication systems

    Science.gov (United States)

    Lu, D.; Yao, K.

    1991-01-01

    In practical applications of importance sampling (IS) simulation, two basic problems are encountered, that of determining the estimation variance and that of evaluating the proper IS parameters needed in the simulations. The authors derive new upper and lower bounds on the estimation variance which are applicable to IS techniques. The upper bound is simple to evaluate and may be minimized by the proper selection of the IS parameter. Thus, lower and upper bounds on the improvement ratio of various IS techniques relative to the direct Monte Carlo simulation are also available. These bounds are shown to be useful and computationally simple to obtain. Based on the proposed technique, one can readily find practical suboptimum IS parameters. Numerical results indicate that these bounding techniques are useful for IS simulations of linear and nonlinear communication systems with intersymbol interference in which bit error rate and IS estimation variances cannot be obtained readily using prior techniques.

  13. Imaging sensory effects of occipital nerve stimulation: a new computer-based method in neuromodulation.

    Science.gov (United States)

    Göbel, Anna; Göbel, Carl H; Heinze, Axel; Heinze-Kuhn, Katja; Petersen, Inga; Meinecke, Christoph; Clasen, Svenja; Niederberger, Uwe; Rasche, Dirk; Mehdorn, Hubertus M; Göbel, Hartmut

    2015-01-01

    Within the last years, occipital nerve stimulation (ONS) has proven to be an important method in the treatment of severe therapy-resistant neurological pain disorders. The correspondence between lead placement as well as possible stimulation parameters and the resulting stimulation effects remains unclear. The method aims to directly relate the neuromodulatory mechanisms with the clinical treatment results, to achieve insight in the mode of action of neuromodulation, to identify the most effective stimulation sets and to optimize individual treatment effects. We describe a new computer-based imaging method for mapping the spatial, cognitive and affective sensory effects of ONS. The procedure allows a quantitative and qualitative analysis of the relationship between lead positioning, the stimulation settings as well as the sensory and clinical stimulation effects. A regular mapping of stimulation and sensory parameters allows a coordinated monitoring. The stimulation results can be reviewed and compared with regards to clinical effectiveness. Copyright © 2015 Elsevier Inc. All rights reserved.

  14. Concerns and Opportunities around Cultural Heritage in East Asian Globally Important Agricultural Heritage Systems (GIAHS

    Directory of Open Access Journals (Sweden)

    Hiroyuki Kajihara

    2018-04-01

    Full Text Available Fifteen years have passed since Food and Agriculture Organization (FAO launched the Globally Important Agricultural Heritage Systems (GIAHS project in 2002. In this time, participation from East Asian countries has been increasing rapidly with interest flowing over into several related subjects and disciplines. Culture is one of the selection criteria that has to be satisfied to become a GIAHS site, and equally culture plays an important role in the development of tourism to a destination. However, few scientists or GIAHS members have discussed directly how to apply cultural features in GIAHS. Therefore, the purposes of this paper are firstly to recognize the importance and contribution of culture in GIAHS. Then, through detailing the current forms of cultural management in the GIAHS located in Japan, Korea, and China, we identify some of the key cultural problems and prospects in those sites. Two social surveys conducted in Japan show that culture is a prime motivation for tourist visitation, as well as being a core GIAHS selection criteria. These surveys further highlight that GIAHS needs to incorporate culture more effectively into their management strategies. Detailed descriptions of the three countries analyzed in this paper outline each has to engage with particular cultural management challenges: Japan has a well-arranged list of cultural assets, but is unclear how to move forward with that information and data. Korea has just begun to generate a strategy on how to manage cultural heritage features in GIAHS with the use of approaches such as Agrostories or Gil tourism, in recognition of the gradual changes that are occurring in local identity. China has the longest history of engagement with GIAHS in the East Asia region. However, the utilization of the model here has recognized further issues of change in cultural identity not least through commercialization. This paper therefore identifies, discusses and arranges eight problems and

  15. Approaches for estimating minimal clinically important differences in systemic lupus erythematosus.

    Science.gov (United States)

    Rai, Sharan K; Yazdany, Jinoos; Fortin, Paul R; Aviña-Zubieta, J Antonio

    2015-06-03

    A minimal clinically important difference (MCID) is an important concept used to determine whether a medical intervention improves perceived outcomes in patients. Prior to the introduction of the concept in 1989, studies focused primarily on statistical significance. As most recent clinical trials in systemic lupus erythematosus (SLE) have failed to show significant effects, determining a clinically relevant threshold for outcome scores (that is, the MCID) of existing instruments may be critical for conducting and interpreting meaningful clinical trials as well as for facilitating the establishment of treatment recommendations for patients. To that effect, methods to determine the MCID can be divided into two well-defined categories: distribution-based and anchor-based approaches. Distribution-based approaches are based on statistical characteristics of the obtained samples. There are various methods within the distribution-based approach, including the standard error of measurement, the standard deviation, the effect size, the minimal detectable change, the reliable change index, and the standardized response mean. Anchor-based approaches compare the change in a patient-reported outcome to a second, external measure of change (that is, one that is more clearly understood, such as a global assessment), which serves as the anchor. Finally, the Delphi technique can be applied as an adjunct to defining a clinically important difference. Despite an abundance of methods reported in the literature, little work in MCID estimation has been done in the context of SLE. As the MCID can help determine the effect of a given therapy on a patient and add meaning to statistical inferences made in clinical research, we believe there ought to be renewed focus on this area. Here, we provide an update on the use of MCIDs in clinical research, review some of the work done in this area in SLE, and propose an agenda for future research.

  16. Important roles of P2Y receptors in the inflammation and cancer of digestive system.

    Science.gov (United States)

    Wan, Han-Xing; Hu, Jian-Hong; Xie, Rei; Yang, Shi-Ming; Dong, Hui

    2016-05-10

    Purinergic signaling is important for many biological processes in humans. Purinoceptors P2Y are widely distributed in human digestive system and different subtypes of P2Y receptors mediate different physiological functions from metabolism, proliferation, differentiation to apoptosis etc. The P2Y receptors are essential in many gastrointestinal functions and also involve in the occurrence of some digestive diseases. Since different subtypes of P2Y receptors are present on the same cell of digestive organs, varying subtypes of P2Y receptors may have opposite or synergetic functions on the same cell. Recently, growing lines of evidence strongly suggest the involvement of P2Y receptors in the pathogenesis of several digestive diseases. In this review, we will focus on their important roles in the development of digestive inflammation and cancer. We anticipate that as the special subtypes of P2Y receptors are studied in depth, specific modulators for them will have good potentials to become promising new drugs to treat human digestive diseases in the near future.

  17. An Indicator Based Assessment Methodology Proposal for the Identification of Domestic Systemically Important Banks within the Turkish Banking Sector

    OpenAIRE

    Ozge ULKUTAS SACCI; Guven SAYILGAN

    2014-01-01

    This study aims to identify domestic systemically important banks (D-SIB) operating within the Turkish Banking Sector. In this regard, adopting an indicator based assessment methodology together with the cluster analysis application, banks in the sample are classified in terms of their degree of systemic importance by using publicly available year-end data of 2012. The study has shown that a total of 7 banks with the highest systemic importance clustered away from the remaining 21 banks in th...

  18. "Too big to fail" or "Too non-traditional to fail"?: The determinants of banks' systemic importance

    OpenAIRE

    Moore, Kyle; Zhou, Chen

    2013-01-01

    This paper empirically analyzes the determinants of banks' systemic importance. In constructing a measure on the systemic importance of financial institutions we find that size is a leading determinant. This confirms the usual "Too big to fail'' argument. Nevertheless, banks with size above a sufficiently high level have equal systemic importance. In addition to size, we find that the extent to which banks engage in non-traditional banking activities is also positively related to ...

  19. Factors affecting learning of vector math from computer-based practice: Feedback complexity and prior knowledge

    Directory of Open Access Journals (Sweden)

    Andrew F. Heckler

    2016-06-01

    Full Text Available In experiments including over 450 university-level students, we studied the effectiveness and time efficiency of several levels of feedback complexity in simple, computer-based training utilizing static question sequences. The learning domain was simple vector math, an essential skill in introductory physics. In a unique full factorial design, we studied the relative effects of “knowledge of correct response” feedback and “elaborated feedback” (i.e., a general explanation both separately and together. A number of other factors were analyzed, including training time, physics course grade, prior knowledge of vector math, and student beliefs about both their proficiency in and the importance of vector math. We hypothesize a simple model predicting how the effectiveness of feedback depends on prior knowledge, and the results confirm this knowledge-by-treatment interaction. Most notably, elaborated feedback is the most effective feedback, especially for students with low prior knowledge and low course grade. In contrast, knowledge of correct response feedback was less effective for low-performing students, and including both kinds of feedback did not significantly improve performance compared to elaborated feedback alone. Further, while elaborated feedback resulted in higher scores, the learning rate was at best only marginally higher because the training time was slightly longer. Training time data revealed that students spent significantly more time on the elaborated feedback after answering a training question incorrectly. Finally, we found that training improved student self-reported proficiency and that belief in the importance of the learned domain improved the effectiveness of training. Overall, we found that computer based training with static question sequences and immediate elaborated feedback in the form of simple and general explanations can be an effective way to improve student performance on a physics essential skill

  20. Interactive computer-based training program for radiological workers

    International Nuclear Information System (INIS)

    Trinoskey, P.A.; Camacho, P.I.; Wells, L.

    2000-01-01

    Lawrence Livermore National Laboratory is redesigning its existing Computer-Based Training (CBT) programs for radiological workers. The redesign represents a major effort that is aimed at producing a single highly interactive and flexible CBT program. The new CBT program is designed to address a variety of radiological workers, including researchers, x-ray operators, and individuals working in tritium, uranium, plutonium, and accelerator facilities. The program addresses the diversity of backgrounds found at a national laboratory. The CBT program includes photographs, line drawings and illustrations, sound, video, and simulations, and it allows for easy insertion and replacement of text, graphics, sound, and video. The new design supports timely updates and customization for use at other University of California sites. The CBT program is divided into ten basic modules. Introduction and Lessons Learned, History and Uses, Fundamentals, Background Radiation, Biological Effects of Radiation, Characteristics of Radionuclides, Radiological Controls, Monitoring, Emergency Response, Responsibilities. Some of the main modules features as many as seven or eight submodules. For example, the module on Characteristics of Radionuclides features submodules on common radionuclides, tritium uranium, plutonium, x-ray machines, E-beam devices, radiographic devices, and accelerators. Required submodules are tailored to an individual's type of work and facility, and they are determined by the answers to an onscreen questionnaire given at the outset of training. Individuals can challenge most individual modules, but certain submodules will be mandatory based on the initial survey. For example, individuals working in the uranium facility will be required to complete the submodule on 'History and Uses of Uranium'. However, all other submodules under the main module, 'History and Uses', will be available if selected for preview. For each module, an opportunity is provided for further