Physicians' intentions and use of three patient decision aids

Directory of Open Access Journals (Sweden)

Mitchell Susan L

2007-07-01

Full Text Available Abstract Background Decision aids are evidence based tools that assist patients in making informed values-based choices and supplement the patient-clinician interaction. While there is evidence to show that decision aids improve key indicators of patients' decision quality, relatively little is known about physicians' acceptance of decision aids or factors that influence their decision to use them. The purpose of this study was to describe physicians' perceptions of three decision aids, their expressed intent to use them, and their subsequent use of them. Methods We conducted a cross-sectional survey of random samples of Canadian respirologists, family physicians, and geriatricians. Three decision aids representing a range of health decisions were evaluated. The survey elicited physicians' opinions on the characteristics of the decision aid and their willingness to use it. Physicians who indicated a strong likelihood of using the decision aid were contacted three months later regarding their actual use of the decision aid. Results Of the 580 eligible physicians, 47% (n = 270 returned completed questionnaires. More than 85% of the respondents felt the decision aid was well developed and that it presented the essential information for decision making in an understandable, balanced, and unbiased manner. A majority of respondents (>80% also felt that the decision aid would guide patients in a logical way, preparing them to participate in decision making and to reach a decision. Fewer physicians ( Conclusion Despite strong support for the format, content, and quality of patient decision aids, and physicians' stated intentions to adopt them into clinical practice, most did not use them within three months of completing the survey. There is a wide gap between intention and behaviour. Further research is required to study the determinants of this intention-behaviour gap and to develop interventions aimed at barriers to physicians' use of decision aids.

Computerized Decision Aids for Shared Decision Making in Serious Illness: Systematic Review.

Science.gov (United States)

Staszewska, Anna; Zaki, Pearl; Lee, Joon

2017-10-06

Shared decision making (SDM) is important in achieving patient-centered care. SDM tools such as decision aids are intended to inform the patient. When used to assist in decision making between treatments, decision aids have been shown to reduce decisional conflict, increase ease of decision making, and increase modification of previous decisions. The purpose of this systematic review is to assess the impact of computerized decision aids on patient-centered outcomes related to SDM for seriously ill patients. PubMed and Scopus databases were searched to identify randomized controlled trials (RCTs) that assessed the impact of computerized decision aids on patient-centered outcomes and SDM in serious illness. Six RCTs were identified and data were extracted on study population, design, and results. Risk of bias was assessed by a modified Cochrane Risk of Bias Tool for Quality Assessment of Randomized Controlled Trials. Six RCTs tested decision tools in varying serious illnesses. Three studies compared different computerized decision aids against each other and a control. All but one study demonstrated improvement in at least one patient-centered outcome. Computerized decision tools may reduce unnecessary treatment in patients with low disease severity in comparison with informational pamphlets. Additionally, electronic health record (EHR) portals may provide the opportunity to manage care from the home for individuals affected by illness. The quality of decision aids is of great importance. Furthermore, satisfaction with the use of tools is associated with increased patient satisfaction and reduced decisional conflict. Finally, patients may benefit from computerized decision tools without the need for increased physician involvement. Most computerized decision aids improved at least one patient-centered outcome. All RCTs identified were at a High Risk of Bias or Unclear Risk of Bias. Effort should be made to improve the quality of RCTs testing SDM aids in serious

Rade-aid a decision support system to evaluate countermeasures after a radiological accident

International Nuclear Information System (INIS)

Wagenaar, G.; Van Den Bosch, C.J.H.; Weger, D. de.

1990-01-01

After Chernobyl the authorities in many countries were overwhelmed by the enormous amount of information that was being generated by measuring and monitoring programs. In making decisions, this information had to be combined with the results of specific countermeasures, in order to determine the optimal strategy with respect to a large number of consequences. The development of RADE-AID, the Radiological Accident Decision AIDing system, is aimed at providing a powerful tool in the decision-making process. RADE-AID is developed by TNO (The Netherlands) in a joint contract with KfK (FRG) and NRPB (UK). In the first phase a demonstration system will be built, called RADE-AID/D. RADE-AID/D will be used as a decision support system in the intermediate and late phase after a radiological accident. RADE-AID/D will consider countermeasures with respect to external exposure and internal exposure by food ingestion. Countermeasures are evaluated considering reduction in doses and in numbers of health effects, costs, and social effects. The paper covers the structure of the program, presentation of data and results, and the decision analysis technique that is being used. This decision analysis part is an important feature of the system; an advanced decision analysis technique is used, that is able to compare data of varying nature. Furthermore the place of RADE-AID in the decision-making process will be treated. RADE-AID/D is an interactive computer program, that offers the user the possibility to enter relevant data and to have data and results displayed in a variety of ways. Furthermore the system contains an advanced decision analysis technique, that is able to compare data of varying nature. Input data for the decision analysis calculations are provided by models from UFOMOD and MARC-codes

Computer-aided detection as a decision assistant in chest radiography

Science.gov (United States)

Samulski, Maurice R. M.; Snoeren, Peter R.; Platel, Bram; van Ginneken, Bram; Hogeweg, Laurens; Schaefer-Prokop, Cornelia; Karssemeijer, Nico

2011-03-01

Background. Contrary to what may be expected, finding abnormalities in complex images like pulmonary nodules in chest radiographs is not dominated by time-consuming search strategies but by an almost immediate global interpretation. This was already known in the nineteen-seventies from experiments with briefly flashed chest radiographs. Later on, experiments with eye-trackers showed that abnormalities attracted the attention quite fast but often without further reader actions. Prolonging one's search seldom leads to newly found abnormalities and may even increase the chance of errors. The problem of reading chest radiographs is therefore not dominated by finding the abnormalities, but by interpreting them. Hypothesis. This suggests that readers could benefit from computer-aided detection (CAD) systems not so much by their ability to prompt potential abnormalities, but more from their ability to 'interpret' the potential abnormalities. In this paper, this hypothesis was investigated by an observer experiment. Experiment. In one condition, the traditional CAD condition, the most suspicious CAD locations were shown to the subjects, without telling them the levels of suspiciousness according to CAD. In the other condition, interactive CAD condition, levels of suspiciousness were given, but only when readers requested them at specified locations. These two conditions focus on decreasing search errors and decision errors, respectively. Results of reading without CAD were also recorded. Six subjects, all non-radiologists, read 223 chest radiographs in both conditions. CAD results were obtained from the OnGuard 5.0 system developed by Riverain Medical (Miamisburg, Ohio). Results. The observer data were analyzed by Location Response Operating Characteristic analysis (LROC). It was found that: 1) With the aid of CAD, the performance is significantly better than without CAD; 2) The performance with interactive CAD is significantly better than with traditional CAD at low false

A study on spatial decision support systems for HIV/AIDS prevention based on COM GIS technology

Science.gov (United States)

Yang, Kun; Luo, Huasong; Peng, Shungyun; Xu, Quanli

2007-06-01

Based on the deeply analysis of the current status and the existing problems of GIS technology applications in Epidemiology, this paper has proposed the method and process for establishing the spatial decision support systems of AIDS epidemic prevention by integrating the COM GIS, Spatial Database, GPS, Remote Sensing, and Communication technologies, as well as ASP and ActiveX software development technologies. One of the most important issues for constructing the spatial decision support systems of AIDS epidemic prevention is how to integrate the AIDS spreading models with GIS. The capabilities of GIS applications in the AIDS epidemic prevention have been described here in this paper firstly. Then some mature epidemic spreading models have also been discussed for extracting the computation parameters. Furthermore, a technical schema has been proposed for integrating the AIDS spreading models with GIS and relevant geospatial technologies, in which the GIS and model running platforms share a common spatial database and the computing results can be spatially visualized on Desktop or Web GIS clients. Finally, a complete solution for establishing the decision support systems of AIDS epidemic prevention has been offered in this paper based on the model integrating methods and ESRI COM GIS software packages. The general decision support systems are composed of data acquisition sub-systems, network communication sub-systems, model integrating sub-systems, AIDS epidemic information spatial database sub-systems, AIDS epidemic information querying and statistical analysis sub-systems, AIDS epidemic dynamic surveillance sub-systems, AIDS epidemic information spatial analysis and decision support sub-systems, as well as AIDS epidemic information publishing sub-systems based on Web GIS.

Use of computer-aided x-ray diagnosis in oncology. [60 refs

Energy Technology Data Exchange (ETDEWEB)

Rotte, K H [Forschungsinstitut fuer Lungenkrankheiten und Tuberkulose, Berlin-Buch (German Democratic Republic)

1979-01-01

The introduction of computer-aided diagnostic reveals new perspectives for diagnostic decisions. The results of the hitherto used mathematical diagnostic models are represented. The Bayes's theorem as the most used model exhibited very different, in part unsatisfactory results. More convenient seem to be multivariate models, like discriminant analysis. Hitherto the computer-aided diagnosis was used in a relative small number of problems concerning differential diagnosis. It is necessary to compare the efficiency of the different mathematical-statistical methods.

A computer-aided molecular design framework for crystallization solvent design

DEFF Research Database (Denmark)

Karunanithi, Arunprakash T.; Achenie, Luke E.K.; Gani, Rafiqul

2006-01-01

One of the key decisions in designing solution crystallization processes is the selection of solvents. In this paper, we present a computer-aided molecular design (CAMD) framework for the design and selection of solvents and/or anti-solvents for solution crystallization. The CAMD problem is formu......One of the key decisions in designing solution crystallization processes is the selection of solvents. In this paper, we present a computer-aided molecular design (CAMD) framework for the design and selection of solvents and/or anti-solvents for solution crystallization. The CAMD problem...... solvent molecules. Solvent design and selection for two types of solution crystallization processes namely cooling crystallization and drowning out crystallization are presented. In the first case study, the design of single compound solvent for crystallization of ibuprofen, which is an important...

Intra-annual wave resource characterization for energy exploitation: A new decision-aid tool

International Nuclear Information System (INIS)

Carballo, R.; Sánchez, M.; Ramos, V.; Fraguela, J.A.; Iglesias, G.

2015-01-01

Highlights: • A decision-aid tool is developed for computing the monthly performance of WECs. • It allows the generation of high-resolution monthly characterization matrices. • The decision-aid tool is implemented to the Death Coast (N Spain). • The monthly matrices can be obtained at any coastal location within the Death Coast. • The tool is applied to a coastal location of a proposed wave farm. - Abstract: The wave energy resource is usually characterized by a significant variability throughout the year. In estimating the power performance of a Wave Energy Converter (WEC) it is fundamental to take into account this variability; indeed, an estimate based on mean annual values may well result in a wrong decision making. In this work, a novel decision-aid tool, iWEDGE (intra-annual Wave Energy Diagram GEnerator) is developed and implemented to a coastal region of interest, the Death Coast (Spain), one of the regions in Europe with the largest wave resource. Following a comprehensive procedure, and based on deep water wave data and high-resolution numerical modelling, this tool provides the monthly high-resolution characterization matrices (or energy diagrams) for any location of interest. In other words, the information required for the accurate computation of the intra-annual performance of any WEC at any location within the region covered is made available. Finally, an application of iWEDGE to the site of a proposed wave farm is presented. The results obtained highlight the importance of the decision-aid tool herein provided for wave energy exploitation

Decision Support Systems and the Conflict Model of Decision Making: A Stimulus for New Computer-Assisted Careers Guidance Systems.

Science.gov (United States)

Ballantine, R. Malcolm

Decision Support Systems (DSSs) are computer-based decision aids to use when making decisions which are partially amenable to rational decision-making procedures but contain elements where intuitive judgment is an essential component. In such situations, DSSs are used to improve the quality of decision-making. The DSS approach is based on Simon's…

Selection of examples in case-based computer-aided decision systems

International Nuclear Information System (INIS)

Mazurowski, Maciej A; Zurada, Jacek M; Tourassi, Georgia D

2008-01-01

Case-based computer-aided decision (CB-CAD) systems rely on a database of previously stored, known examples when classifying new, incoming queries. Such systems can be particularly useful since they do not need retraining every time a new example is deposited in the case base. The adaptive nature of case-based systems is well suited to the current trend of continuously expanding digital databases in the medical domain. To maintain efficiency, however, such systems need sophisticated strategies to effectively manage the available evidence database. In this paper, we discuss the general problem of building an evidence database by selecting the most useful examples to store while satisfying existing storage requirements. We evaluate three intelligent techniques for this purpose: genetic algorithm-based selection, greedy selection and random mutation hill climbing. These techniques are compared to a random selection strategy used as the baseline. The study is performed with a previously presented CB-CAD system applied for false positive reduction in screening mammograms. The experimental evaluation shows that when the development goal is to maximize the system's diagnostic performance, the intelligent techniques are able to reduce the size of the evidence database to 37% of the original database by eliminating superfluous and/or detrimental examples while at the same time significantly improving the CAD system's performance. Furthermore, if the case-base size is a main concern, the total number of examples stored in the system can be reduced to only 2-4% of the original database without a decrease in the diagnostic performance. Comparison of the techniques shows that random mutation hill climbing provides the best balance between the diagnostic performance and computational efficiency when building the evidence database of the CB-CAD system.

Decision Aid for Cigarette Smokers Scheduled for Elective Surgery.

Science.gov (United States)

Warner, David O; LeBlanc, Annie; Kadimpati, Sandeep; Vickers, Kristin S; Shi, Yu; Montori, Victor M

2015-07-01

Decision aids can increase patient involvement in decision-making about health care. The study goal was to develop and test a decision aid for use by clinicians in discussion options for changing smoking behavior before and after elective surgery. In formative work, a decision aid was designed to facilitate patient-clinician discussion regarding three options: continue smoking, attempt a period of temporary abstinence, and attempt to quit smoking for good. A randomized, two-group pilot study was then conducted in smokers evaluated in preparation for elective surgery in a preoperative clinic to test the hypothesis that the decision aid would improve measures of decisional quality compared with usual care. The final decision aid consisted of three laminated cards. The front of each card included a colorful graphic describing each choice; the reverse including two to three pros and cons for each decision, a simple graphic illustrating the effects of smoking on the body, and a motivational phrase. In the randomized trial of 130 patients, the decision aid significantly (P < 0.05) improved measures of decisional quality and patient involvement in decision making (Cohen's d effect sizes of 0.76 and 1.20 for the Decisional Conflict Scale and Observing PatienT involvement In decisiON-making scale, respectively). However, the decision aid did not affect any aspect of perioperative smoking behavior, including the distribution of or adherence to choices. Although the use of a decision aid to facilitate clinician-patient discussions regarding tobacco use around the time of surgery substantially improved measures of decisional quality, it alone did not change perioperative tobacco use behavior.

Costs incurred by applying computer-aided design/computer-aided manufacturing techniques for the reconstruction of maxillofacial defects.

Science.gov (United States)

Rustemeyer, Jan; Melenberg, Alex; Sari-Rieger, Aynur

2014-12-01

This study aims to evaluate the additional costs incurred by using a computer-aided design/computer-aided manufacturing (CAD/CAM) technique for reconstructing maxillofacial defects by analyzing typical cases. The medical charts of 11 consecutive patients who were subjected to the CAD/CAM technique were considered, and invoices from the companies providing the CAD/CAM devices were reviewed for every case. The number of devices used was significantly correlated with cost (r = 0.880; p costs were found between cases in which prebent reconstruction plates were used (€3346.00 ± €29.00) and cases in which they were not (€2534.22 ± €264.48; p costs of two, three and four devices, even when ignoring the cost of reconstruction plates. Additional fees provided by statutory health insurance covered a mean of 171.5% ± 25.6% of the cost of the CAD/CAM devices. Since the additional fees provide financial compensation, we believe that the CAD/CAM technique is suited for wide application and not restricted to complex cases. Where additional fees/funds are not available, the CAD/CAM technique might be unprofitable, so the decision whether or not to use it remains a case-to-case decision with respect to cost versus benefit. Copyright © 2014 European Association for Cranio-Maxillo-Facial Surgery. Published by Elsevier Ltd. All rights reserved.

Computer-aided design and computer science technology

Science.gov (United States)

Fulton, R. E.; Voigt, S. J.

1976-01-01

A description is presented of computer-aided design requirements and the resulting computer science advances needed to support aerospace design. The aerospace design environment is examined, taking into account problems of data handling and aspects of computer hardware and software. The interactive terminal is normally the primary interface between the computer system and the engineering designer. Attention is given to user aids, interactive design, interactive computations, the characteristics of design information, data management requirements, hardware advancements, and computer science developments.

Research on computer aided testing of pilot response to critical in-flight events

Science.gov (United States)

Giffin, W. C.; Rockwell, T. H.; Smith, P. J.

1984-01-01

Experiments on pilot decision making are described. The development of models of pilot decision making in critical in flight events (CIFE) are emphasized. The following tests are reported on the development of: (1) a frame system representation describing how pilots use their knowledge in a fault diagnosis task; (2) assessment of script norms, distance measures, and Markov models developed from computer aided testing (CAT) data; and (3) performance ranking of subject data. It is demonstrated that interactive computer aided testing either by touch CRT's or personal computers is a useful research and training device for measuring pilot information management in diagnosing system failures in simulated flight situations. Performance is dictated by knowledge of aircraft sybsystems, initial pilot structuring of the failure symptoms and efficient testing of plausible causal hypotheses.

Multicriteria methodology for decision aiding

CERN Document Server

Roy, Bernard

1996-01-01

This is the first comprehensive book to present, in English, the multicriteria methodology for decision aiding In the foreword the distinctive features and main ideas of the European School of MCDA are outlined The twelve chapters are essentially expository in nature, but scholarly in treatment Some questions, which are too often neglected in the literature on decision theory, such as how is a decision made, who are the actors, what is a decision aiding model, how to define the set of alternatives, are discussed Examples are used throughout the book to illustrate the various concepts Ways to model the consequences of each alternative and building criteria taking into account the inevitable imprecisions, uncertainties and indeterminations are described and illustrated The three classical operational approaches of MCDA synthesis in one criterion (including MAUT), synthesis by outranking relations, interactive local judgements, are studied This methodology tries to be a theoretical or intellectual framework dire...

The neglected topic: presentation of cost information in patient decision AIDS.

Science.gov (United States)

Blumenthal-Barby, J S; Robinson, Emily; Cantor, Scott B; Naik, Aanand D; Russell, Heidi Voelker; Volk, Robert J

2015-05-01

Costs are an important component of patients' decision making, but a comparatively underemphasized aspect of formal shared decision making. We hypothesized that decision aids also avoid discussion of costs, despite their being tools designed to facilitate shared decision making about patient-centered outcomes. We sought to define the frequency of cost-related information and identify the common modes of presenting cost and cost-related information in the 290 decision aids catalogued in the Ottawa Hospital Research Institute's Decision Aid Library Inventory (DALI) system. We found that 56% (n = 161) of the decision aids mentioned cost in some way, but only 13% (n = 37) gave a specific price or range of prices. We identified 9 different ways in which cost was mentioned. The most common approach was as a "pro" of one of the treatment options (e.g., "you avoid the cost of medication"). Of the 37 decision aids that gave specific prices or ranges of prices for treatment options, only 2 were about surgery decisions despite the fact that surgery decision aids were the most common. Our findings suggest that presentation of cost information in decision aids is highly variable. Evidence-based guidelines should be developed by the International Patient Decision Aid Standards (IPDAS) Collaboration. © The Author(s) 2015.

Are patient decision aids the best way to improve clinical decision making? Report of the IPDAS Symposium.

Science.gov (United States)

Holmes-Rovner, Margaret; Nelson, Wendy L; Pignone, Michael; Elwyn, Glyn; Rovner, David R; O'Connor, Annette M; Coulter, Angela; Correa-de-Araujo, Rosaly

2007-01-01

This article reports on the International Patient Decision Aid Standards Symposium held in 2006 at the annual meeting of the Society for Medical Decision Making in Cambridge, Massachusetts. The symposium featured a debate regarding the proposition that "decision aids are the best way to improve clinical decision making.'' The formal debate addressed the theoretical problem of the appropriate gold standard for an improved decision, efficacy of decision aids, and prospects for implementation. Audience comments and questions focused on both theory and practice: the often unacknowledged roots of decision aids in expected utility theory and the practical problems of limited patient decision aid implementation in health care. The participants' vote on the proposition was approximately half for and half against.

Evaluation of computer-aided detection and diagnosis systems.

Science.gov (United States)

Petrick, Nicholas; Sahiner, Berkman; Armato, Samuel G; Bert, Alberto; Correale, Loredana; Delsanto, Silvia; Freedman, Matthew T; Fryd, David; Gur, David; Hadjiiski, Lubomir; Huo, Zhimin; Jiang, Yulei; Morra, Lia; Paquerault, Sophie; Raykar, Vikas; Samuelson, Frank; Summers, Ronald M; Tourassi, Georgia; Yoshida, Hiroyuki; Zheng, Bin; Zhou, Chuan; Chan, Heang-Ping

2013-08-01

Computer-aided detection and diagnosis (CAD) systems are increasingly being used as an aid by clinicians for detection and interpretation of diseases. Computer-aided detection systems mark regions of an image that may reveal specific abnormalities and are used to alert clinicians to these regions during image interpretation. Computer-aided diagnosis systems provide an assessment of a disease using image-based information alone or in combination with other relevant diagnostic data and are used by clinicians as a decision support in developing their diagnoses. While CAD systems are commercially available, standardized approaches for evaluating and reporting their performance have not yet been fully formalized in the literature or in a standardization effort. This deficiency has led to difficulty in the comparison of CAD devices and in understanding how the reported performance might translate into clinical practice. To address these important issues, the American Association of Physicists in Medicine (AAPM) formed the Computer Aided Detection in Diagnostic Imaging Subcommittee (CADSC), in part, to develop recommendations on approaches for assessing CAD system performance. The purpose of this paper is to convey the opinions of the AAPM CADSC members and to stimulate the development of consensus approaches and "best practices" for evaluating CAD systems. Both the assessment of a standalone CAD system and the evaluation of the impact of CAD on end-users are discussed. It is hoped that awareness of these important evaluation elements and the CADSC recommendations will lead to further development of structured guidelines for CAD performance assessment. Proper assessment of CAD system performance is expected to increase the understanding of a CAD system's effectiveness and limitations, which is expected to stimulate further research and development efforts on CAD technologies, reduce problems due to improper use, and eventually improve the utility and efficacy of CAD in

Computer aided control engineering

DEFF Research Database (Denmark)

Szymkat, Maciej; Ravn, Ole

1997-01-01

Current developments in the field of Computer Aided Control Engineering (CACE) have a visible impact on the design methodologies and the structure of the software tools supporting them. Today control engineers has at their disposal libraries, packages or programming environments that may...... in CACE enhancing efficient flow of information between the tools supporting the following phases of the design process. In principle, this flow has to be two-way, and more or less automated, in order to enable the engineer to observe the propagation of the particular design decisions taken at various...... levels.The major conclusions of the paper are related with identifying the factors affecting the software tool integration in a way needed to facilitate design "inter-phase" communication. These are: standard application interfaces, dynamic data exchange mechanisms, code generation techniques and general...

Computationally determining the salience of decision points for real-time wayfinding support

Directory of Open Access Journals (Sweden)

Makoto Takemiya

2012-06-01

Full Text Available This study introduces the concept of computational salience to explain the discriminatory efficacy of decision points, which in turn may have applications to providing real-time assistance to users of navigational aids. This research compared algorithms for calculating the computational salience of decision points and validated the results via three methods: high-salience decision points were used to classify wayfinders; salience scores were used to weight a conditional probabilistic scoring function for real-time wayfinder performance classification; and salience scores were correlated with wayfinding-performance metrics. As an exploratory step to linking computational and cognitive salience, a photograph-recognition experiment was conducted. Results reveal a distinction between algorithms useful for determining computational and cognitive saliences. For computational salience, information about the structural integration of decision points is effective, while information about the probability of decision-point traversal shows promise for determining cognitive salience. Limitations from only using structural information and motivations for future work that include non-structural information are elicited.

AIDS: Administrative Decisions and Constitutional Rights.

Science.gov (United States)

Greenlaw, Paul S.; Kohl, John P.

1993-01-01

Review of case law in educational administration, hospitals, correctional institutions, and the military shows that, when risk of AIDS transmission is high, courts will support public sector administrators' decisions. Low risk means such decisions as mandatory blood testing will usually be struck down. (SK)

Nurse aide decision making in nursing homes: factors affecting empowerment.

Science.gov (United States)

Chaudhuri, Tanni; Yeatts, Dale E; Cready, Cynthia M

2013-09-01

To evaluate factors affecting structural empowerment among nurse aides in nursing homes. Structural empowerment can be defined as the actual rather than perceived ability to make autonomous decisions within an organisation. Given the paucity of research on the subject, this study helps to close the gap by identifying factors that affect nurse aide empowerment, that is, decision-making among nurse aides. The data for the study come from self-administered questionnaires distributed to direct-care workers (nurse aides) in 11 nursing homes in a southern state in the USA. Ordinary least square regression models were estimated to analyse the effects of demographic predictors, personal factors (competency, emotional exhaustion and positive attitude) and structural characteristics (coworker and supervisor support, information availability and shared governance) on nurse aide decision-making. Findings suggest race among demographic predictors, emotional exhaustion among personal characteristics, and supervisor support, and shared governance among structural factors, significantly affect nurse aide decision-making. It is important to explore race as one of the central determinants of structural empowerment among nurse aides. In addition, the nature and type of emotional exhaustion that propels decision-making needs to be further examined. The study shows the importance of shared governance and supervisor support for fostering nurse aide empowerment. © 2013 Blackwell Publishing Ltd.

Decision aids that support decisions about prenatal testing for Down syndrome: an environmental scan.

Science.gov (United States)

Leiva Portocarrero, Maria Esther; Garvelink, Mirjam M; Becerra Perez, Maria Margarita; Giguère, Anik; Robitaille, Hubert; Wilson, Brenda J; Rousseau, François; Légaré, France

2015-09-24

Prenatal screening tests for Down syndrome (DS) are routine in many developed countries and new tests are rapidly becoming available. Decisions about prenatal screening are increasingly complex with each successive test, and pregnant women need information about risks and benefits as well as clarity about their values. Decision aids (DAs) can help healthcare providers support women in this decision. Using an environmental scan, we aimed to identify publicly available DAs focusing on prenatal screening/diagnosis for Down syndrome that provide effective support for decision making. Data sources searched were the Decision Aids Library Inventory (DALI) of the Ottawa Patient Decision Aids Research Group at the Ottawa Health Research Institute; Google searches on the internet; professional organizations, academic institutions and other experts in the field; and references in existing systematic reviews on DAs. Eligible DAs targeted pregnant women, focused on prenatal screening and/or diagnosis, applied to tests for fetal abnormalities or aneuploidies, and were in French, English, Spanish or Portuguese. Pairs of reviewers independently identified eligible DAs and extracted characteristics including the presence of practical decision support tools and features to aid comprehension. They then performed quality assessment using the 16 minimum standards established by the International Patient Decision Aids Standards (IPDASi v4.0). Of 543 potentially eligible DAs (512 in DALI, 27 from experts, and four on the internet), 23 were eligible and 20 were available for data extraction. DAs were developed from 1996 to 2013 in six countries (UK, USA, Canada, Australia, Sweden, and France). Five DAs were for prenatal screening, three for prenatal diagnosis and 12 for both). Eight contained values clarification methods (personal worksheets). The 20 DAs scored a median of 10/16 (range 6-15) on the 16 IPDAS minimum standards. None of the 20 included DAs met all 16 IPDAS minimum standards

Operation and validation of the decision aid system 'CAIRE' in complex terrain

International Nuclear Information System (INIS)

De Witt, H.; Nuesser, A.; Brenk, H.D.

1998-01-01

In cases of nuclear emergencies it is the primary task of emergency response forces and decision making authorities to act properly. Based on telemetric surveillance networks, an advanced automatic on-line decision support system named CAIRE (Computer Aided Response to Emergencies) has been developed and is in operation now at 4 sites as a real time emergency response tool. This tool is designed to provide decision makers with precise radiation exposure data for the population at risk. Depending on the individual layout of the connected telemetric networks, CAIRE is able to satisfy the following main requirements: automatic identification of the source location and of the source term, automatic diagnosis of the actual radiological situation and identification of the endangered area, projection of the radiological situation, delivery of all this information in the form computer graphics. (R.P.)

Pulmonary lobar volumetry using novel volumetric computer-aided diagnosis and computed tomography

Science.gov (United States)

Iwano, Shingo; Kitano, Mariko; Matsuo, Keiji; Kawakami, Kenichi; Koike, Wataru; Kishimoto, Mariko; Inoue, Tsutomu; Li, Yuanzhong; Naganawa, Shinji

2013-01-01

OBJECTIVES To compare the accuracy of pulmonary lobar volumetry using the conventional number of segments method and novel volumetric computer-aided diagnosis using 3D computed tomography images. METHODS We acquired 50 consecutive preoperative 3D computed tomography examinations for lung tumours reconstructed at 1-mm slice thicknesses. We calculated the lobar volume and the emphysematous lobar volume volumetry computer-aided diagnosis system could more precisely measure lobar volumes than the conventional number of segments method. Because semi-automatic computer-aided diagnosis and automatic computer-aided diagnosis were complementary, in clinical use, it would be more practical to first measure volumes by automatic computer-aided diagnosis, and then use semi-automatic measurements if automatic computer-aided diagnosis failed. PMID:23526418

Fractography of clinically fractured, implant-supported dental computer-aided design and computer-aided manufacturing crowns

NARCIS (Netherlands)

Lohbauer, Ulrich; Belli, Renan; Cune, Marco S; Schepke, Ulf

2017-01-01

Today, a substantial part of the dental crown production uses computer-aided design and computer-aided manufacturing (CAD/CAM) technology. A recent step in restorative dentistry is the replacement of natural tooth structure with pre-polymerized and machined resin-based methacrylic polymers.

Computer-Aided Modeling Framework

DEFF Research Database (Denmark)

Fedorova, Marina; Sin, Gürkan; Gani, Rafiqul

Models are playing important roles in design and analysis of chemicals based products and the processes that manufacture them. Computer-aided methods and tools have the potential to reduce the number of experiments, which can be expensive and time consuming, and there is a benefit of working...... development and application. The proposed work is a part of the project for development of methods and tools that will allow systematic generation, analysis and solution of models for various objectives. It will use the computer-aided modeling framework that is based on a modeling methodology, which combines....... In this contribution, the concept of template-based modeling is presented and application is highlighted for the specific case of catalytic membrane fixed bed models. The modeling template is integrated in a generic computer-aided modeling framework. Furthermore, modeling templates enable the idea of model reuse...

Tactical Decision Aids High Bandwidth Links Using Autonomous Vehicles

Science.gov (United States)

2004-01-01

1 Tactical Decision Aids (High Bandwidth Links Using Autonomous Vehicles ) A. J. Healey, D. P. Horner, Center for Autonomous Underwater Vehicle...SUBTITLE Tactical Decision Aids (High Bandwidth Links Using Autonomous Vehicles ) 5a. CONTRACT NUMBER 5b. GRANT NUMBER 5c. PROGRAM ELEMENT NUMBER 6

Deep learning aided decision support for pulmonary nodules diagnosing: a review.

Science.gov (United States)

Yang, Yixin; Feng, Xiaoyi; Chi, Wenhao; Li, Zhengyang; Duan, Wenzhe; Liu, Haiping; Liang, Wenhua; Wang, Wei; Chen, Ping; He, Jianxing; Liu, Bo

2018-04-01

Deep learning techniques have recently emerged as promising decision supporting approaches to automatically analyze medical images for different clinical diagnosing purposes. Diagnosing of pulmonary nodules by using computer-assisted diagnosing has received considerable theoretical, computational, and empirical research work, and considerable methods have been developed for detection and classification of pulmonary nodules on different formats of images including chest radiographs, computed tomography (CT), and positron emission tomography in the past five decades. The recent remarkable and significant progress in deep learning for pulmonary nodules achieved in both academia and the industry has demonstrated that deep learning techniques seem to be promising alternative decision support schemes to effectively tackle the central issues in pulmonary nodules diagnosing, including feature extraction, nodule detection, false-positive reduction, and benign-malignant classification for the huge volume of chest scan data. The main goal of this investigation is to provide a comprehensive state-of-the-art review of the deep learning aided decision support for pulmonary nodules diagnosing. As far as the authors know, this is the first time that a review is devoted exclusively to deep learning techniques for pulmonary nodules diagnosing.

Decision aid for women considering breast cancer screening

DEFF Research Database (Denmark)

Pasternack, Iris; Saalasti-Koskinen, Ulla; Mäkelä, Marjukka

2011-01-01

OBJECTIVES: The aim of this study was to describe the process and challenges of developing a decision aid for the national public breast cancer screening program in Finland. METHODS: An expert team with stakeholder representation used European guidelines and other literature as basis for selecting...... relevant content and format for the decision aid for breast cancer screening. Feedback from women was sought for the draft documents. RESULTS: A decision aid attached to the invitation letter for screening was considered the best way to ensure access to information. In addition, tailored letter templates...... information for women invited to breast cancer screening is demanding and requires careful planning. Professionals and service providers need to be engaged in the HTA process to ensure proper dissemination and implementation of the information. End user participation is essential in the formulation...

Decision aids for patients facing a surgical treatment decision: a systematic review and meta-analysis

NARCIS (Netherlands)

Knops, Anouk M.; Legemate, Dink A.; Goossens, Astrid; Bossuyt, Patrick M. M.; Ubbink, Dirk T.

2013-01-01

To summarize the evidence available on the effects of decision aids in surgery. When consenting to treatment, few patients adequately understand their treatment options. To help patients make deliberate treatment choices, decision aids provide evidence-based information on the disease, treatment

Decision aids for people considering taking part in clinical trials.

Science.gov (United States)

Gillies, Katie; Cotton, Seonaidh C; Brehaut, Jamie C; Politi, Mary C; Skea, Zoe

2015-11-27

Several interventions have been developed to promote informed consent for participants in clinical trials. However, many of these interventions focus on the content and structure of information (e.g. enhanced information or changes to the presentation format) rather than the process of decision making. Patient decision aids support a decision making process about medical options. Decision aids support the decision process by providing information about available options and their associated outcomes, alongside information that enables patients to consider what value they place on particular outcomes, and provide structured guidance on steps of decision making. They have been shown to be effective for treatment and screening decisions but evidence on their effectiveness in the context of informed consent for clinical trials has not been synthesised. To assess the effectiveness of decision aids for clinical trial informed consent compared to no intervention, standard information (i.e. usual practice) or an alternative intervention on the decision making process. We searched the following databases and to March 2015: Cochrane Central Register of Controlled Trials (CENTRAL), The Cochrane Library; MEDLINE (OvidSP) (from 1950); EMBASE (OvidSP) (from 1980); PsycINFO (OvidSP) (from 1806); ASSIA (ProQuest) (from 1987); WHO International Clinical Trials Registry Platform (ICTRP) (http://apps.who.int/trialsearch/); ClinicalTrials.gov; ISRCTN Register (http://www.controlled-trials.com/isrctn/). We also searched reference lists of included studies and relevant reviews. We contacted study authors and other experts. There were no language restrictions. We included randomised and quasi-randomised controlled trials comparing decision aids in the informed consent process for clinical trials alone, or in conjunction with standard information (such as written or verbal) or alongside alternative interventions (e.g. paper-based versus web-based decision aids). Included trials involved

Computer-aided decision making.

Science.gov (United States)

Keith M. Reynolds; Daniel L. Schmoldt

2006-01-01

Several major classes of software technologies have been used in decisionmaking for forest management applications over the past few decades. These computer-based technologies include mathematical programming, expert systems, network models, multi-criteria decisionmaking, and integrated systems. Each technology possesses unique advantages and disadvantages, and has...

Identifying design considerations for a shared decision aid for use at the point of outpatient clinical care: An ethnographic study at an inner city clinic.

Science.gov (United States)

Hajizadeh, Negin; Perez Figueroa, Rafael E; Uhler, Lauren M; Chiou, Erin; Perchonok, Jennifer E; Montague, Enid

2013-03-06

Computerized decision aids could facilitate shared decision-making at the point of outpatient clinical care. The objective of this study was to investigate whether a computerized shared decision aid would be feasible to implement in an inner-city clinic by evaluating the current practices in shared decision-making, clinicians' use of computers, patient and clinicians' attitudes and beliefs toward computerized decision aids, and the influence of time on shared decision-making. Qualitative data analysis of observations and semi-structured interviews with patients and clinicians at an inner-city outpatient clinic. The findings provided an exploratory look at the prevalence of shared decision-making and attitudes about health information technology and decision aids. A prominent barrier to clinicians engaging in shared decision-making was a lack of perceived patient understanding of medical information. Some patients preferred their clinicians make recommendations for them rather than engage in formal shared decision-making. Health information technology was an integral part of the clinic visit and welcomed by most clinicians and patients. Some patients expressed the desire to engage with health information technology such as viewing their medical information on the computer screen with their clinicians. All participants were receptive to the idea of a decision aid integrated within the clinic visit although some clinicians were concerned about the accuracy of prognostic estimates for complex medical problems. We identified several important considerations for the design and implementation of a computerized decision aid including opportunities to: bridge clinician-patient communication about medical information while taking into account individual patients' decision-making preferences, complement expert clinician judgment with prognostic estimates, take advantage of patient waiting times, and make tasks involved during the clinic visit more efficient. These findings

Computer-Aided Manufacturing of 3D Workpieces

OpenAIRE

Cornelia Victoria Anghel Drugarin; Mihaela Dorica Stroia

2017-01-01

Computer-Aided Manufacturing (CAM) assumes to use dedicated software for controlling machine tools and similar devices in the process of workpieces manufacturing. CAM is, in fact, an application technology that uses computer software and machinery to simplify and automate manufacturing processes. CAM is the inheritor of computer-aided engineering (CAE) and is often used conjunctively with computer-aided design (CAD). Advanced CAM solutions are forthcoming and have a large ...

Computer-aided cleanup

International Nuclear Information System (INIS)

Williams, J.; Jones, B.

1994-01-01

In late 1992, the remedial investigation of operable unit 2 at the Department of Energy (DOE) Superfund site in Fernald, Ohio was in trouble. Despite years of effort--including an EPA-approved field-investigation work plan, 123 soil borings, 51 ground-water-monitoring wells, analysis of more than 650 soil and ground-water samples, and preparation of a draft remedial-investigation (RI) report--it was not possible to conclude if contaminated material in the unit was related to ground-water contamination previously detected beneath and beyond the site boundary. Compounding the problem, the schedule for the RI, feasibility study and record of decision for operable unit 2 was governed by a DOE-EPA consent agreement stipulating penalties of up to $10,000 per week for not meeting scheduled milestones--and time was running out. An advanced three-dimensional computer model confirmed that radioactive wastes dumped at the Fernald, Ohio Superfund site had contaminated ground water, after years of previous testing has been inconclusive. The system is now being used to aid feasibility and design work on the more-than-$1 billion remediation project

Explanation and elaboration of the Standards for UNiversal reporting of patient Decision Aid Evaluations (SUNDAE) guidelines: examples of reporting SUNDAE items from patient decision aid evaluation literature

Science.gov (United States)

Hoffman, Aubri S; Abhyankar, Purva; Sheridan, Stacey; Bekker, Hilary; LeBlanc, Annie; Levin, Carrie; Ropka, Mary; Shaffer, Victoria; Stacey, Dawn; Stalmeier, Peep; Vo, Ha; Wills, Celia; Thomson, Richard

2018-01-01

This Explanation and Elaboration (E&E) article expands on the 26 items in the Standards for UNiversal reporting of Decision Aid Evaluations guidelines. The E&E provides a rationale for each item and includes examples for how each item has been reported in published papers evaluating patient decision aids. The E&E focuses on items key to reporting studies evaluating patient decision aids and is intended to be illustrative rather than restrictive. Authors and reviewers may wish to use the E&E broadly to inform structuring of patient decision aid evaluation reports, or use it as a reference to obtain details about how to report individual checklist items. PMID:29467235

Decision trees and integrated features for computer aided mammographic screening

Energy Technology Data Exchange (ETDEWEB)

Kegelmeyer, W.P. Jr.; Groshong, B.; Allmen, M.; Woods, K.

1997-02-01

Breast cancer is a serious problem, which in the United States causes 43,000 deaths a year, eventually striking 1 in 9 women. Early detection is the only effective countermeasure, and mass mammography screening is the only reliable means for early detection. Mass screening has many shortcomings which could be addressed by a computer-aided mammographic screening system. Accordingly, we have applied the pattern recognition methods developed in earlier investigations of speculated lesions in mammograms to the detection of microcalcifications and circumscribed masses, generating new, more rigorous and uniform methods for the detection of both those signs. We have also improved the pattern recognition methods themselves, through the development of a new approach to combinations of multiple classifiers.

Community Pharmacists' Perspectives of a Decision Aid for Managing Type 2 Diabetes in Ontario.

Science.gov (United States)

Verweel, Lee; Gionfriddo, Michael R; MacCallum, Lori; Dolovich, Lisa; Rosenberg-Yunger, Zahava R S

2017-12-01

Decision aids are tools designed to help patients make choices about their health care. We explored pharmacists' perceptions of an evidence-based diabetes decision aid developed by the Mayo Clinic, Diabetes Medication Choice (DMC). Using DMC as a reference, we aimed to explore pharmacists' perspectives on decision aids, their place in a community pharmacy setting and the implementing of a decision aid, such as DMC, in Ontario. We used semistructured interviews with a convenience sample of community pharmacists from Ontario. We applied a thematic analysis to the data. We conducted 16 interviews with pharmacists, of whom 9 were certified diabetes educators, and 10 were female. Three themes emerged from the data: pharmacists' knowledge and awareness of decision aids; pharmacists' perceptions of the DMC decision aids, and implementation of the DMC decision aids in Ontario pharmacies. Participants discussed their limited experience with and training in the use of decision aids. Although many participants agreed that the DMC decision aids may contribute to patient-centred care, all agreed that significant changes were needed to be made to implement this tool in practice. Pharmacists felt that the use of decision aids in community pharmacies in Ontario may improve patient-centred care. Modifications, however, are needed to improve the applicability to their context and fit into their workflow. Empirical data concerning the impact of decision aids in community pharmacy is needed. Copyright © 2017 Diabetes Canada. Published by Elsevier Inc. All rights reserved.

Computer-aided detection systems to improve lung cancer early diagnosis: state-of-the-art and challenges

International Nuclear Information System (INIS)

Traverso, A; Lopez Torres, E; Cerello, P; Fantacci, M E

2017-01-01

Lung cancer is one of the most lethal types of cancer, because its early diagnosis is not good enough. In fact, the detection of pulmonary nodule, potential lung cancers, in Computed Tomography scans is a very challenging and time-consuming task for radiologists. To support radiologists, researchers have developed Computer-Aided Diagnosis (CAD) systems for the automated detection of pulmonary nodules in chest Computed Tomography scans. Despite the high level of technological developments and the proved benefits on the overall detection performance, the usage of Computer-Aided Diagnosis in clinical practice is far from being a common procedure. In this paper we investigate the causes underlying this discrepancy and present a solution to tackle it: the M5L WEB- and Cloud-based on-demand Computer-Aided Diagnosis. In addition, we prove how the combination of traditional imaging processing techniques with state-of-art advanced classification algorithms allows to build a system whose performance could be much larger than any Computer-Aided Diagnosis developed so far. This outcome opens the possibility to use the CAD as clinical decision support for radiologists. (paper)

Computer-aided detection systems to improve lung cancer early diagnosis: state-of-the-art and challenges

Science.gov (United States)

Traverso, A.; Lopez Torres, E.; Fantacci, M. E.; Cerello, P.

2017-05-01

Lung cancer is one of the most lethal types of cancer, because its early diagnosis is not good enough. In fact, the detection of pulmonary nodule, potential lung cancers, in Computed Tomography scans is a very challenging and time-consuming task for radiologists. To support radiologists, researchers have developed Computer-Aided Diagnosis (CAD) systems for the automated detection of pulmonary nodules in chest Computed Tomography scans. Despite the high level of technological developments and the proved benefits on the overall detection performance, the usage of Computer-Aided Diagnosis in clinical practice is far from being a common procedure. In this paper we investigate the causes underlying this discrepancy and present a solution to tackle it: the M5L WEB- and Cloud-based on-demand Computer-Aided Diagnosis. In addition, we prove how the combination of traditional imaging processing techniques with state-of-art advanced classification algorithms allows to build a system whose performance could be much larger than any Computer-Aided Diagnosis developed so far. This outcome opens the possibility to use the CAD as clinical decision support for radiologists.

A computer-tailored intervention to promote informed decision making for prostate cancer screening among African American men.

Science.gov (United States)

Allen, Jennifer D; Mohllajee, Anshu P; Shelton, Rachel C; Drake, Bettina F; Mars, Dana R

2009-12-01

African American men experience a disproportionate burden of prostate cancer (CaP) morbidity and mortality. National screening guidelines advise men to make individualized screening decisions through a process termed informed decision making (IDM). In this pilot study, a computer-tailored decision-aid designed to promote IDM was evaluated using a pre-/posttest design. African American men aged 40 years and older were recruited from a variety of community settings (n = 108). At pretest, 43% of men reported having made a screening decision; at posttest 47% reported this to be the case (p = .39). Significant improvements were observed between pre- and posttest on scores of knowledge, decision self-efficacy, and decisional conflict. Men were also more likely to want an active role in decision making after using the tool. These results suggest that use of a computer-tailored decision aid is a promising strategy to promote IDM for CaP screening among African American men.

Image-processing techniques used in the computer-aided detection of radiographic lesions in anatomic background

International Nuclear Information System (INIS)

Giger, M.L.; Doi, K.; MacMahon, H.; Yin, F.F.

1988-01-01

The authors developed feature-extraction techniques for use in the computer-aided detection of pulmonary nodules in digital chest images. Use of such a computer-aided detection scheme, which would alert radiologists to the locations of suspected lung nodules, is expected to reduce the number of false-negative diagnoses. False-negative diagnoses (i.e., misses) are a current problem in chest radiology with ''miss-rates'' as high as 30%. This may be due to the camouflaging effect of surrounding anatomic background on the nodule, or to the subjective and varying decision criteria used by radiologists

Probability of Survival Decision Aid (PSDA)

National Research Council Canada - National Science Library

Xu, Xiaojiang; Amin, Mitesh; Santee, William R

2008-01-01

A Probability of Survival Decision Aid (PSDA) is developed to predict survival time for hypothermia and dehydration during prolonged exposure at sea in both air and water for a wide range of environmental conditions...

Integrated computer aided design simulation and manufacture

OpenAIRE

Diko, Faek

1989-01-01

Computer Aided Design (CAD) and Computer Aided Manufacture (CAM) have been investigated and developed since twenty years as standalone systems. A large number of very powerful but independent packages have been developed for Computer Aided Design,Aanlysis and Manufacture. However, in most cases these packages have poor facility for communicating with other packages. Recently attempts have been made to develop integrated CAD/CAM systems and many software companies a...

Patient decision aids in routine maternity care: Benefits, barriers, and new opportunities.

Science.gov (United States)

Stevens, Gabrielle; Thompson, Rachel; Watson, Bernadette; Miller, Yvette D

2016-02-01

Participation in decision-making, supported by comprehensive and quality information provision, is increasingly emphasised as a priority for women in maternity care. Patient decision aids are tools that can offer women greater access to information and guidance to participate in maternity care decision-making. Relative to their evaluation in controlled settings, the implementation of patient decision aids in routine maternity care has received little attention and our understanding of which approaches may be effective is limited. This paper critically discusses the application of patient decision aids in routine maternity care and explores viable solutions for promoting their successful uptake. A range of patient decision aids have been developed for use within maternity care, and controlled trials have highlighted their positive impact on the decision-making process for women. Nevertheless, evidence of successful patient decision aid implementation in real world health care settings is lacking due to practical and ideological barriers that exist. Patient-directed social marketing campaigns are a relatively novel approach to patient decision aid delivery that may facilitate their adoption in maternity care, at least in the short-term, by overcoming common implementation barriers. Social marketing may also be particularly well suited to maternity care, given the unique characteristics of this health context. The potential of social marketing campaigns to facilitate patient decision aid adoption in maternity care highlights the need for pragmatic trials to evaluate their effectiveness. Identifying which sub-groups of women are more or less likely to respond to these strategies will further direct implementation. Copyright © 2015 Australian College of Midwives. Published by Elsevier Ltd. All rights reserved.

Empirical Evaluation of a Decision-Analytic Aid.

Science.gov (United States)

1980-05-01

Morris, Smallwood , Lansford, and Gibbons (1980) state: "In the traditional paradigm, the decision-maker must decide to accept or reject the model. If he... Smallwood , R. D., Langford, R. K., & Gibbons, R. S. Analytic Procedures for Evaluating Decision Aids. Applied Decision Analysis, Inc. (Menlo Park, CA...Menlo Park, CA 94025 Department of Psychology University of Oklahoma Dr. Jesse Orlansky 455 West Lindsey Institute for Defense Analyses Norman , OK 73069

A computer-tailored intervention to promote informed decision making for prostate cancer screening among African-American men

Science.gov (United States)

Allen, Jennifer D.; Mohllajee, Anshu P.; Shelton, Rachel C.; Drake, Bettina F.; Mars, Dana R.

2010-01-01

African-American men experience a disproportionate burden of prostate cancer (CaP) morbidity and mortality. National screening guidelines advise men to make individualized screening decisions through a process termed “informed decision making” (IDM). In this pilot study, a computer-tailored decision-aid designed to promote IDM was evaluated using a pre/post test design. African-American men aged 40+ recruited from a variety of community settings (n=108). At pre-test, 43% of men reported having made a screening decision; at post-test 47% reported this to be the case (p=0.39). Significant improvements were observed on scores (0–100%) of knowledge (54% vs 72%; pMen were also more likely to want an active role in decision-making after using the tool (67% vs 75%; p=0.03). These results suggest that use of a computer-tailored decision-aid is a promising strategy to promote IDM for CaP screening among African-American men. PMID:19477736

Development of a decision aid for children faced with the decision to undergo dental treatment with sedation or general anaesthesia.

Science.gov (United States)

Hulin, Joe; Baker, Sarah R; Marshman, Zoe; Albadri, Sondos; Rodd, Helen D

2017-09-01

Decision aids are tools used to help individuals faced with difficult healthcare decisions. They help patients further understand the treatment options available and encourage the sharing of information between patients and clinicians. To develop a decision aid for young patients faced with the decision to undergo dental treatment with inhalation sedation, intravenous sedation, or general anaesthesia (GA). Qualitative interviews with dental patients (aged 10-16 years), and their parents/guardians were used to inform the content of a draft decision aid. Following further revisions, a pilot evaluation of the decision aid was conducted. Patients referred for dental treatment with sedation or GA were recruited from a UK dental hospital. Patients (n = 15) and parents/guardians (n = 13) assigned to the intervention group received the decision aid and routine clinical counselling, whereas patients (n = 17) and parents/guardians (n = 13) in the control group only received routine clinical counselling. Participants completed measures of knowledge, decisional conflict, and dental anxiety. Knowledge scores were significantly higher for participants who received the decision aid when compared to standard care. There were no other significant differences between groups. A decision aid was successfully developed, and initial findings suggest such tools could be beneficial to dental sedation or GA patients and their parents/guardians. Further research is required on the use of such tools in primary care settings, with particular attention to the impact of the decision aid on attendance and completion rates of treatment. © 2016 BSPD, IAPD and John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

Refining a brief decision aid in stable CAD: cognitive interviews

OpenAIRE

Kelly-Blake, Karen; Clark, Stacie; Dontje, Katherine; Olomu, Adesuwa; Henry, Rebecca C; Rovner, David R; Rothert, Marilyn L; Holmes-Rovner, Margaret

2014-01-01

Background We describe the results of cognitive interviews to refine the “Making Choices©” Decision Aid (DA) for shared decision-making (SDM) about stress testing in patients with stable coronary artery disease (CAD). Methods We conducted a systematic development process to design a DA consistent with International Patient Decision Aid Standards (IPDAS) focused on Alpha testing criteria. Cognitive interviews were conducted with ten stable CAD patients using the “think aloud” interview techniq...

Computer-Aided Qualitative Data Analysis with Word

Directory of Open Access Journals (Sweden)

Bruno Nideröst

2002-05-01

Full Text Available Despite some fragmentary references in the literature about qualitative methods, it is fairly unknown that Word can be successfully used for computer-aided Qualitative Data Analyses (QDA. Based on several Word standard operations, elementary QDA functions such as sorting data, code-and-retrieve and frequency counts can be realized. Word is particularly interesting for those users who wish to have first experiences with computer-aided analysis before investing time and money in a specialized QDA Program. The well-known standard software could also be an option for those qualitative researchers who usually work with word processing but have certain reservations towards computer-aided analysis. The following article deals with the most important requirements and options of Word for computer-aided QDA. URN: urn:nbn:de:0114-fqs0202225

Assisting informed decision making for labour analgesia: a randomised controlled trial of a decision aid for labour analgesia versus a pamphlet

Directory of Open Access Journals (Sweden)

Torvaldsen Siranda

2010-04-01

Full Text Available Abstract Background Most women use some method of pain relief during labour. There is extensive research evidence available of pharmacological pain relief during labour; however this evidence is not readily available to pregnant women. Decision aids are tools that present evidence based information and allow preference elicitation. Methods We developed a labour analgesia decision aid. Using a RCT design women either received a decision aid or a pamphlet. Eligible women were primiparous, ≥ 37 weeks, planning a vaginal birth of a single infant and had sufficient English to complete the trial materials. We used a combination of affective (anxiety, satisfaction and participation in decision-making and behavioural outcomes (intention and analgesia use to assess the impact of the decision aid, which were assessed before labour. Results 596 women were randomised (395 decision aid group, 201 pamphlet group. There were significant differences in knowledge scores between the decision aid group and the pamphlet group (mean difference 8.6, 95% CI 3.70, 13.40. There were no differences between decisional conflict scores (mean difference -0.99 (95% CI -3.07, 1.07, or anxiety (mean difference 0.3, 95% CI -2.15, 1.50. The decision aid group were significantly more likely to consider their care providers opinion (RR 1.28 95%CI 0.64, 0.95. There were no differences in analgesia use and poor follow through between antenatal analgesia intentions and use. Conclusions This decision aid improves women's labour analgesia knowledge without increasing anxiety. Significantly, the decision aid group were more informed of labour analgesia options, and considered the opinion of their care providers more often when making their analgesia decisions, thus improving informed decision making. Trial Registration Trial registration no: ISRCTN52287533

Computer-Aided Engineering for Electric-Drive Vehicle Batteries (CAEBAT)

Science.gov (United States)

Consortium and Partners | Transportation Research | NREL Computer-Aided Engineering for Electric-Drive Vehicle Batteries (CAEBAT) Consortium and Partners Computer-Aided Engineering for Electric -Drive Vehicle Batteries (CAEBAT) Consortium and Partners The Computer-Aided Engineering for Electric

A Framework for Evaluating the Cost-Effectiveness of Patient Decision Aids: A Case Study Using Colorectal Cancer Screening

Science.gov (United States)

Cantor, Scott B.; Rajan, Tanya; Linder, Suzanne K.; Volk, Robert J.

2017-01-01

Objective Patient decision aids are important tools for facilitating balanced, evidence-based decision making. However, the potential of decision aids to lower health care utilization and costs is uncertain; few studies have investigated the cost-effectiveness of decision aids that change patient behavior. Using an example of a decision aid for colorectal cancer screening, we provide a framework for analyzing the cost-effectiveness of decision aids. Methods A decision-analytic model with two strategies (decision aid or no decision aid) was used to calculate expected costs in U.S. dollars and benefits measured in life-years saved (LYS). Data from a systematic review of ten studies about decision aid effectiveness was used to calculate the percentage increase in the number of people choosing screening instead of no screening. We then calculated the incremental cost per LYS with the use of the decision aid. Results The no decision aid strategy had an expected cost of $3,023 and yielded 18.19 LYS. The decision aid strategy cost $3,249 and yielded 18.20 LYS. The incremental cost-effectiveness ratio for the decision aid strategy was $36,126 per LYS. Results were sensitive to the cost of the decision aid and the percentage change in behavior caused by the decision aid. Conclusions This study provides proof-of-concept evidence for future studies examining the cost-effectiveness of decision aids. The results suggest that decision aids can be beneficial and cost-effective. PMID:25979678

Computer-Aided Engineering for Electric-Drive Vehicle Batteries (CAEBAT) |

Science.gov (United States)

Transportation Research | NREL Computer-Aided Engineering for Electric-Drive Vehicle Batteries (CAEBAT) Computer-Aided Engineering for Electric-Drive Vehicle Batteries (CAEBAT) Graphic of a 24-cell (bottom). Images: Courtesy of EC Power NREL's work on the U.S. Department of Energy Computer-Aided

arriba-lib: evaluation of an electronic library of decision aids in primary care physicians

Directory of Open Access Journals (Sweden)

Hirsch Oliver

2012-06-01

Full Text Available Abstract Background The successful implementation of decision aids in clinical practice initially depends on how clinicians perceive them. Relatively little is known about the acceptance of decision aids by physicians and factors influencing the implementation of decision aids from their point of view. Our electronic library of decision aids (arriba-lib is to be used within the encounter and has a modular structure containing evidence-based decision aids for the following topics: cardiovascular prevention, atrial fibrillation, coronary heart disease, oral antidiabetics, conventional and intensified insulin therapy, and unipolar depression. The aim of our study was to evaluate the acceptance of arriba-lib in primary care physicians. Methods We conducted an evaluation study in which 29 primary care physicians included 192 patients. The physician questionnaire contained information on which module was used, how extensive steps of the shared decision making process were discussed, who made the decision, and a subjective appraisal of consultation length. We used generalised estimation equations to measure associations within patient variables and traditional crosstab analyses. Results Only a minority of consultations (8.9% was considered to be unacceptably extended. In 90.6% of consultations, physicians said that a decision could be made. A shared decision was perceived by physicians in 57.1% of consultations. Physicians said that a decision was more likely to be made when therapeutic options were discussed “detailed”. Prior experience with decision aids was not a critical variable for implementation within our sample of primary care physicians. Conclusions Our study showed that it might be feasible to apply our electronic library of decision aids (arriba-lib in the primary care context. Evidence-based decision aids offer support for physicians in the management of medical information. Future studies should monitor the long-term adoption of

Supporting informed decision making online in 20 minutes: an observational web-log study of a PSA test decision aid.

NARCIS (Netherlands)

Joseph-Williams, N.; Evans, R.; Edwards, A.; Newcombe, R.G.; Wright, P.; Grol, R.P.T.M.; Elwyn, G.

2010-01-01

BACKGROUND: Web-based decision aids are known to have an effect on knowledge, attitude, and behavior; important components of informed decision making. We know what decision aids achieve in randomized controlled trials (RCTs), but we still know very little about how they are used and how this

Patient Decision Aids Improve Decision Quality and Patient Experience and Reduce Surgical Rates in Routine Orthopaedic Care: A Prospective Cohort Study.

Science.gov (United States)

Sepucha, Karen; Atlas, Steven J; Chang, Yuchiao; Dorrwachter, Janet; Freiberg, Andrew; Mangla, Mahima; Rubash, Harry E; Simmons, Leigh H; Cha, Thomas

2017-08-02

Patient decision aids are effective in randomized controlled trials, yet little is known about their impact in routine care. The purpose of this study was to examine whether decision aids increase shared decision-making when used in routine care. A prospective study was designed to evaluate the impact of a quality improvement project to increase the use of decision aids for patients with hip or knee osteoarthritis, lumbar disc herniation, or lumbar spinal stenosis. A usual care cohort was enrolled before the quality improvement project and an intervention cohort was enrolled after the project. Participants were surveyed 1 week after a specialist visit, and surgical status was collected at 6 months. Regression analyses adjusted for clustering of patients within clinicians and examined the impact on knowledge, patient reports of shared decision-making in the visit, and surgical rates. With 550 surveys, the study had 80% to 90% power to detect a difference in these key outcomes. The response rates to the 1-week survey were 70.6% (324 of 459) for the usual care cohort and 70.2% (328 of 467) for the intervention cohort. There was no significant difference (p > 0.05) in any patient characteristic between the 2 cohorts. More patients received decision aids in the intervention cohort at 63.6% compared with the usual care cohort at 27.3% (p = 0.007). Decision aid use was associated with higher knowledge scores, with a mean difference of 18.7 points (95% confidence interval [CI], 11.4 to 26.1 points; p < 0.001) for the usual care cohort and 15.3 points (95% CI, 7.5 to 23.0 points; p = 0.002) for the intervention cohort. Patients reported more shared decision-making (p = 0.009) in the visit with their surgeon in the intervention cohort, with a mean Shared Decision-Making Process score (and standard deviation) of 66.9 ± 27.5 points, compared with the usual care cohort at 62.5 ± 28.6 points. The majority of patients received their preferred treatment, and this did not differ

Geo-Spatial Tactical Decision Aid Systems: Fuzzy Logic for Supporting Decision Making

National Research Council Canada - National Science Library

Grasso, Raffaele; Giannecchini, Simone

2006-01-01

.... This paper describes a tactical decision aid system based on fuzzy logic reasoning for data fusion and on current Open Geospatial Consortium specifications for interoperability, data dissemination...

Aiding Lay Decision Making Using a Cognitive Competencies Approach.

Science.gov (United States)

Maule, A J; Maule, Simon

2015-01-01

Two prescriptive approaches have evolved to aid human decision making: just in time interventions that provide support as a decision is being made; and just in case interventions that educate people about future events that they may encounter so that they are better prepared to make an informed decision when these events occur. We review research on these two approaches developed in the context of supporting everyday decisions such as choosing an apartment, a financial product or a medical procedure. We argue that the lack of an underlying prescriptive theory has limited the development and evaluation of these interventions. We draw on recent descriptive research on the cognitive competencies that underpin human decision making to suggest new ways of interpreting how and why existing decision aids may be effective and suggest a different way of evaluating their effectiveness. We also briefly outline how our approach has the potential to develop new interventions to support everyday decision making and highlight the benefits of drawing on descriptive research when developing and evaluating interventions.

Decision aid prototype development for parents considering adenotonsillectomy for their children with sleep disordered breathing

OpenAIRE

Maguire, Erin; Hong, Paul; Ritchie, Krista; Meier, Jeremy; Archibald, Karen; Chorney, Jill

2016-01-01

Background To describe the process involved in developing a decision aid prototype for parents considering adenotonsillectomy for their children with sleep disordered breathing. Methods A paper-based decision aid prototype was developed using the framework proposed by the International Patient Decision Aids Standards Collaborative. The decision aid focused on two main treatment options: watchful waiting and adenotonsillectomy. Usability was assessed with parents of pediatric patients and prov...

Acceptance of shared decision making with reference to an electronic library of decision aids (arriba-lib) and its association to decision making in patients: an evaluation study.

Science.gov (United States)

Hirsch, Oliver; Keller, Heidemarie; Krones, Tanja; Donner-Banzhoff, Norbert

2011-07-07

Decision aids based on the philosophy of shared decision making are designed to help patients make informed choices among diagnostic or treatment options by delivering evidence-based information on options and outcomes. A patient decision aid can be regarded as a complex intervention because it consists of several presumably relevant components. Decision aids have rarely been field tested to assess patients' and physicians' attitudes towards them. It is also unclear what effect decision aids have on the adherence to chosen options. The electronic library of decision aids (arriba-lib) to be used within the clinical encounter has a modular structure and contains evidence-based decision aids for the following topics: cardiovascular prevention, atrial fibrillation, coronary heart disease, oral antidiabetics, conventional and intensified insulin therapy, and unipolar depression. We conducted an evaluation study in which 29 primary care physicians included 192 patients. After the consultation, patients filled in questionnaires and were interviewed via telephone two months later. We used generalised estimation equations to measure associations within patient variables and traditional crosstab analyses. Patients were highly satisfied with arriba-lib and the process of shared decision making. Two-thirds of patients reached in the telephone interview wanted to be counselled again with arriba-lib. There was a high congruence between preferred and perceived decision making. Of those patients reached in the telephone interview, 80.7% said that they implemented the decision, independent of gender and education. Elderly patients were more likely to say that they implemented the decision. Shared decision making with our multi-modular electronic library of decision aids (arriba-lib) was accepted by a high number of patients. It has positive associations to general aspects of decision making in patients. It can be used for patient groups with a wide range of individual

Computer aided design

International Nuclear Information System (INIS)

Barache, J.M.; Beltranda, G.; Blanc, P.

1987-01-01

In order to ensure that the data transmitted to the managment system is of the required quality and consistent with the general control command protocols, computer aided design (CAD) was employed for level N4. One describes the use of CAD for the control system of N4 [fr

[Clinical skills and outcomes of chair-side computer aided design and computer aided manufacture system].

Science.gov (United States)

Yu, Q

2018-04-09

Computer aided design and computer aided manufacture (CAD/CAM) technology is a kind of oral digital system which is applied to clinical diagnosis and treatment. It overturns the traditional pattern, and provides a solution to restore defect tooth quickly and efficiently. In this paper we mainly discuss the clinical skills of chair-side CAD/CAM system, including tooth preparation, digital impression, the three-dimensional design of prosthesis, numerical control machining, clinical bonding and so on, and review the outcomes of several common kinds of materials at the same time.

Assessing Practitioners’ and Patients’ Needs Regarding Shared Decision-Making and Decision Aids

Directory of Open Access Journals (Sweden)

Michiel Hageman

2016-04-01

Full Text Available Background: As part of the process of developing a decision aid for carpal tunnel syndrome (CTS according to the Ottawa Decision Support Framework, we were interested in the level of ‘decisional conflict’ of hand surgeons and patients with CTS. This study addresses the null hypothesis that there is no difference between surgeon and patient decisional conflict with respect to test and treatment options for CTS. Secondary analyses assess the impact of patient and physician demographics and the strength of the patient-physician relationship on decisional conflict.   Methods: One-hundred-twenty-three observers of the Science of Variation Group (SOVG and 84 patients with carpal tunnel syndrome completed a survey regarding the Decisional Conflict Scale. Patients also filled out the Pain Self-efficacy Questionnaire (PSEQ and the Patient Doctor Relationship Questionnaire (PDRQ-9.   Results: On average, patients had significantly greater decision conflict and scored higher on most subscales of the decisional conflict scale than hand surgeons.Factors associated with greater decision conflict were specific hand surgeon, less self-efficacy (confidence that one can achieve one’s goals in spite of pain, and higher PDRQ (relationship between patient and doctor. Surgeons from Europe have--on average--significantly more decision conflict than surgeons in the United States of America.   Conclusions: Patients with CTS have more decision conflict than hand surgeons. Decision aids might help narrow this gap in decisional conflict.

An esthetics rehabilitation with computer-aided design/ computer-aided manufacturing technology.

Science.gov (United States)

Mazaro, Josá Vitor Quinelli; de Mello, Caroline Cantieri; Zavanelli, Adriana Cristina; Santiago, Joel Ferreira; Amoroso, Andressa Paschoal; Pellizzer, Eduardo Piza

2014-07-01

This paper describes a case of a rehabilitation involving Computer Aided Design/Computer Aided Manufacturing (CAD-CAM) system in implant supported and dental supported prostheses using zirconia as framework. The CAD-CAM technology has developed considerably over last few years, becoming a reality in dental practice. Among the widely used systems are the systems based on zirconia which demonstrate important physical and mechanical properties of high strength, adequate fracture toughness, biocompatibility and esthetics, and are indicated for unitary prosthetic restorations and posterior and anterior framework. All the modeling was performed by using CAD-CAM system and prostheses were cemented using resin cement best suited for each situation. The rehabilitation of the maxillary arch using zirconia framework demonstrated satisfactory esthetic and functional results after a 12-month control and revealed no biological and technical complications. This article shows the important of use technology CAD/CAM in the manufacture of dental prosthesis and implant-supported.

Diagnosis by computer-aided tomography in patients with carcinomas in the rectum-sigma area

International Nuclear Information System (INIS)

Gnann, H.; Huebener, K.H.; Ahlemann, L.M.; Harms, S.

1984-01-01

In a retrospective study on the patients at Tuebingen between 1977 and 1980, the diagnostic value of computer-aided tomography was investigated in 232 cases of carcinomas in the rectum-sigma area. 192 examinations were post-operative. Whether computer-aided tomography will catch on as a staging measure in the pre-operative phase must for now remain unanswered until prospective studies on a large number of patients have been carried through. However, it is useful as a decision-taking aid as regards the choice of the operation method and to clarify whether the carcinoma is operable. Far more important in view of the known high rate of recurvency and metastatic spread seems to be the role of computer-aided tomography in the aftercare especially of those patients who had their rectum removed: the diagnosis of the recidivation permits direct therapeutic action (a second operation, radiation therapy) at an early date. The search for clinically not previously known recidivations revealed that computer-aided tomography had in 124 patients with operated rectal carcinoma a high sensitivity of 98 per cent, a specificity of 87 per cent and an accuracy of 91.9 percent. How long after the operation CAT checks should be carried through is quite as uncertain at present as the role of CAT in the staging of those tumors. The authors recommend intervals of 2-3 months within the first two post-operative years. (orig.) [de

onlineDeCISion.org: a web-based decision aid for DCIS treatment.

Science.gov (United States)

Ozanne, Elissa M; Schneider, Katharine H; Soeteman, Djøra; Stout, Natasha; Schrag, Deborah; Fordis, Michael; Punglia, Rinaa S

2015-11-01

Women diagnosed with DCIS face complex treatment decisions and often do so with inaccurate and incomplete understanding of the risks and benefits involved. Our objective was to create a tool to guide these decisions for both providers and patients. We developed a web-based decision aid designed to provide clinicians with tailored information about a patient’s recurrence risks and survival outcomes following different treatment strategies for DCIS. A theoretical framework, microsimulation model (Soeteman et al., J Natl Cancer 105:774–781, 2013) and best practices for web-based decision tools guided the development of the decision aid. The development process used semi-structured interviews and usability testing with key stakeholders, including a diverse group of multidisciplinary clinicians and a patient advocate. We developed onlineDeCISion.​org to include the following features that were rated as important by the stakeholders: (1) descriptions of each of the standard treatment options available; (2) visual projections of the likelihood of time-specific (10-year and lifetime) breast-preservation, recurrence, and survival outcomes; and (3) side-by-side comparisons of down-stream effects of each treatment choice. All clinicians reviewing the decision aid in usability testing were interested in using it in their clinical practice. The decision aid is available in a web-based format and is planned to be publicly available. To improve treatment decision making in patients with DCIS, we have developed a web-based decision aid onlineDeCISion.​org that conforms to best practices and that clinicians are interested in using in their clinics with patients to better inform treatment decisions.

Medical communication and technology: a video-based process study of the use of decision aids in primary care consultations

Directory of Open Access Journals (Sweden)

Graham Ruth

2007-01-01

Full Text Available Abstract Background Much of the research on decision-making in health care has focused on consultation outcomes. Less is known about the process by which clinicians and patients come to a treatment decision. This study aimed to quantitatively describe the behaviour shown by doctors and patients during primary care consultations when three types of decision aids were used to promote treatment decision-making in a randomised controlled trial. Methods A video-based study set in an efficacy trial which compared the use of paper-based guidelines (control with two forms of computer-based decision aids (implicit and explicit versions of DARTS II. Treatment decision concerned warfarin anti-coagulation to reduce the risk of stroke in older patients with atrial fibrillation. Twenty nine consultations were video-recorded. A ten-minute 'slice' of the consultation was sampled for detailed content analysis using existing interaction analysis protocols for verbal behaviour and ethological techniques for non-verbal behaviour. Results Median consultation times (quartiles differed significantly depending on the technology used. Paper-based guidelines took 21 (19–26 minutes to work through compared to 31 (16–41 minutes for the implicit tool; and 44 (39–55 minutes for the explicit tool. In the ten minutes immediately preceding the decision point, GPs dominated the conversation, accounting for 64% (58–66% of all utterances and this trend was similar across all three arms of the trial. Information-giving was the most frequent activity for both GPs and patients, although GPs did this at twice the rate compared to patients and at higher rates in consultations involving computerised decision aids. GPs' language was highly technically focused and just 7% of their conversation was socio-emotional in content; this was half the socio-emotional content shown by patients (15%. However, frequent head nodding and a close mirroring in the direction of eye-gaze suggested

Right choice, right time: Evaluation of an online decision aid for youth depression.

Science.gov (United States)

Simmons, Magenta B; Elmes, Aurora; McKenzie, Joanne E; Trevena, Lyndal; Hetrick, Sarah E

2017-08-01

Appropriate treatment for youth depression is an important public health priority. Shared decision making has been recommended, yet no decision aids exist to facilitate this. The main objective of this study was to evaluate an online decision aid for youth depression. An uncontrolled cohort study with pre-decision, immediately post-decision and follow-up measurements. Young people (n=66) aged 12-25 years with mild, mild-moderate or moderate-severe depression were recruited from two enhanced primary care services. Online decision aid with evidence communication, preference elicitation and decision support components. The main outcome measures were ability to make a decision; whether the decision was in line with clinical practice guidelines, personal preferences and values; decisional conflict; perceived involvement; satisfaction with decision; adherence; and depression scores at follow-up. After using the decision aid, clients were more likely to make a decision in line with guideline recommendations (93% vs 70%; P=.004), were more able to make a decision (97% vs 79%; P=.022), had significantly reduced decisional conflict (17.8 points lower (95% CI: 13.3-22.9 points lower) on the Decisional Conflict Scale (range 0-100)) and felt involved and satisfied with their decision. At follow-up, clients had significantly reduced depression symptoms (2.7 points lower (95% CI: 1.3-4.0 points lower) on the Patient Health Questionnaire nine-item scale (range 0-27)) and were adherent to 88% (95% CI: 82%-94%) of treatment courses. A decision aid for youth depression can help ensure evidence-based, client-centred care, promoting collaboration in this often difficult to engage population. © 2016 The Authors. Health Expectations Published by John Wiley & Sons Ltd.

Studies and Analyses of Vulnerabilities in Aided Adversarial Decision Making

National Research Council Canada - National Science Library

Llinas, James

1998-01-01

.... The aid" in the analysis (i.e., an automated decision aid) focuses upon a generic data fusion processor that estimates situation and threat states based on multisensor/multisource-based data assessments...

Computer-aided engineering in High Energy Physics

International Nuclear Information System (INIS)

Bachy, G.; Hauviller, C.; Messerli, R.; Mottier, M.

1988-01-01

Computing, standard tool for a long time in the High Energy Physics community, is being slowly introduced at CERN in the mechanical engineering field. The first major application was structural analysis followed by Computer-Aided Design (CAD). Development work is now progressing towards Computer-Aided Engineering around a powerful data base. This paper gives examples of the power of this approach applied to engineering for accelerators and detectors

Provider perspectives on the utility of a colorectal cancer screening decision aid for facilitating shared decision making.

Science.gov (United States)

Schroy, Paul C; Mylvaganam, Shamini; Davidson, Peter

2014-02-01

Decision aids for colorectal cancer (CRC) screening have been shown to enable patients to identify a preferred screening option, but the extent to which such tools facilitate shared decision making (SDM) from the perspective of the provider is less well established. Our goal was to elicit provider feedback regarding the impact of a CRC screening decision aid on SDM in the primary care setting. Cross-sectional survey. Primary care providers participating in a clinical trial evaluating the impact of a novel CRC screening decision aid on SDM and adherence. Perceptions of the impact of the tool on decision-making and implementation issues. Twenty-nine of 42 (71%) eligible providers responded, including 27 internists and two nurse practitioners. The majority (>60%) felt that use of the tool complimented their usual approach, increased patient knowledge, helped patients identify a preferred screening option, improved the quality of decision making, saved time and increased patients' desire to get screened. Respondents were more neutral is their assessment of whether the tool improved the overall quality of the patient visit or patient satisfaction. Fewer than 50% felt that the tool would be easy to implement into their practices or that it would be widely used by their colleagues. Decision aids for CRC screening can improve the quality and efficiency of SDM from the provider perspective but future use is likely to depend on the extent to which barriers to implementation can be addressed. © 2011 John Wiley & Sons Ltd.

Constructing a relevant decision aid for parents of children with bronchopulmonary dysplasia.

Science.gov (United States)

Skibo, M; Guillen, U; Zhang, H; Munson, D; Mackley, A; Nilan, K; Kirpalani, H

2017-12-01

To develop and test a decision aid for counseling parents of children with bronchopulmonary dysplasia (BPD).Local problem:Parental education about complex conditions is not standardized and communication and understanding may not be adequate. Semi-structured interviews were conducted with 33 neonatal clinicians and 12 parents of children with BPD using a qualitative research design. The interviews were used to identify education topics that were felt to be important in BPD education. These topics were then used to create a visual decision aid to be used in counseling sessions with parents. The decision aid was then used in mock counseling sessions with 15 'experienced' participants and 7 'naïve' participants to assess its efficacy. The participants completed a pre and post test to assess change in knowledge as well as an 11-question Likert style acceptability survey. Implementation of a decision aid while educating parents about BPD. Topics identified during the interviews were used to create eight educational cards which included pictures, pictographs and statistics. Overall, participants thought the decision aid contained an appropriate amount of information, were easy to understand and improved their knowledge about BPD. Testing demonstrated a significant increase in knowledge in both the 'experienced' (Pdecision aid for parents of children with BPD may improve understanding of the condition and help facilitate communication between parents and doctors.

Intersubjective decision-making for computer-aided forging technology design

Science.gov (United States)

Kanyukov, S. I.; Konovalov, A. V.; Muizemnek, O. Yu.

2017-12-01

We propose a concept of intersubjective decision-making for problems of open-die forging technology design. The intersubjective decisions are chosen from a set of feasible decisions using the fundamentals of the decision-making theory in fuzzy environment according to the Bellman-Zadeh scheme. We consider the formalization of subjective goals and the choice of membership functions for the decisions depending on subjective goals. We study the arrangement of these functions into an intersubjective membership function. The function is constructed for a resulting decision, which is chosen from a set of feasible decisions. The choice of the final intersubjective decision is discussed. All the issues are exemplified by a specific technological problem. The considered concept of solving technological problems under conditions of fuzzy goals allows one to choose the most efficient decisions from a set of feasible ones. These decisions correspond to the stated goals. The concept allows one to reduce human participation in automated design. This concept can be used to develop algorithms and design programs for forging numerous types of forged parts.

Refining a brief decision aid in stable CAD: cognitive interviews.

Science.gov (United States)

Kelly-Blake, Karen; Clark, Stacie; Dontje, Katherine; Olomu, Adesuwa; Henry, Rebecca C; Rovner, David R; Rothert, Marilyn L; Holmes-Rovner, Margaret

2014-02-13

We describe the results of cognitive interviews to refine the "Making Choices©" Decision Aid (DA) for shared decision-making (SDM) about stress testing in patients with stable coronary artery disease (CAD). We conducted a systematic development process to design a DA consistent with International Patient Decision Aid Standards (IPDAS) focused on Alpha testing criteria. Cognitive interviews were conducted with ten stable CAD patients using the "think aloud" interview technique to assess the clarity, usefulness, and design of each page of the DA. Participants identified three main messages: 1) patients have multiple options based on stress tests and they should be discussed with a physician, 2) take care of yourself, 3) the stress test is the gold standard for determining the severity of your heart disease. Revisions corrected the inaccurate assumption of item number three. Cognitive interviews proved critical for engaging patients in the development process and highlighted the necessity of clear message development and use of design principles that make decision materials easy to read and easy to use. Cognitive interviews appear to contribute critical information from the patient perspective to the overall systematic development process for designing decision aids.

Veterans Like Me: Formative evaluation of a patient decision aid design.

Science.gov (United States)

Gibson, Bryan; Butler, Jorie; Doyon, Katherine; Ellington, Lee; Bray, Bruce E; Zeng, Qing

2017-07-01

Patient decision aids are tools intended to facilitate shared decision-making. Currently development of a patient decision aid is resource intensive: it requires a decision-specific review of the scientific literature by experts to ascertain the potential outcomes under different treatments. The goal of this project was to conduct a formative evaluation of a generalizable, scalable decision aid component we call Veterans Like Me (VLme). VLme mines EHR data to present the outcomes of individuals "like you" on different treatments to the user. These outcome are presented through a combination of an icon array and simulated narratives. Twenty-six patients participated in semi-structured interviews intended to elicit feedback on the tool's functional and interface design. The interview focused on the filters users desired with which to make cases similar to them, the kinds of outcomes they wanted presented, and their envisioned use of the tool. The interview also elicited participants information needs and salient factors related to the therapeutic decision. The interview transcripts were analyzed using an iteratively refined coding schema and content analysis. . Participants generally expressed enthusiasm for the tool's design and functionality. Our analysis identified desired filters for users to view patients like themselves, outcome types that should be included in future iterations of the tool (e.g. patient reported outcomes), and information needs that need to be addressed for patients to effectively participate in shared decision making. Implications for the integration of our findings into the design of patient decision aids are discussed. Published by Elsevier Inc.

Feasibility of web-based decision aids in neurological patients

NARCIS (Netherlands)

van Til, Janine Astrid; Drossaert, Constance H.C.; Renzenbrink, Gerbert J.; Snoek, Govert J.; Dijkstra, Evelien; Stiggelbout, Anne M.; IJzerman, Maarten Joost

2010-01-01

Decision aids (DAs) may be helpful in improving patients' participation in medical decision-making. We investigated the potential for web-based DAs in a rehabilitation population. Two self-administered DAs focused on the treatment of acquired ankle-foot impairment in stroke and the treatment of

Effect of patient decision aid was influenced by presurgical evaluation among patients with osteoarthritis of the knee.

Science.gov (United States)

Boland, Laura; Taljaard, Monica; Dervin, Geoffrey; Trenaman, Logan; Tugwell, Peter; Pomey, Marie-Pascale; Stacey, Dawn

2018-02-01

Decision aids help patients make total joint arthroplasty decisions, but presurgical evaluation might influence the effects of a decision aid. We compared the effects of a decision aid among patients considering total knee arthroplasty at 2 surgical screening clinics with different evaluation processes. We performed a subgroup analysis of a randomized controlled trial. Patients were recruited from 2 surgical screening clinics: an academic clinic providing 20-minute physician consultations and a community clinic providing 45-minute physiotherapist/nurse consultations with education. We compared the effects of decision quality, decisional conflict and surgery rate using Cochran-Mantel-Haenszel χ 2 tests and the Breslow-Day test. We evaluated 242 patients: 123 from the academic clinic (61 who used the decision aid and 62 controls) and 119 from the community clinic (59 who used the decision aid and 60 controls). Results suggested a between-site difference in the effect of the decision aid on the patients' decision quality ( p = 0.09): at the academic site, patients who used the decision aid were more likely to make better-quality decisions than controls (54% v. 35%, p = 0.044), but not at the community site (47% v. 51%, p = 0.71). Fewer patients who used decision aids at the academic site than at the community site experienced decisional conflict ( p = 0.007) (33% v. 52%, p = 0.05 at the academic site and 40% v. 24%, p = 0.08 at the community site). The effect of the decision aid on surgery rates did not differ between sites ( p = 0.65). The decision aid had a greater effect at the academic site than at the community site, which provided longer consultations with more verbal education. Hence, decision aids might be of greater value when more extensive total knee arthroplasty presurgical assessment and counselling are either impractical or unavailable.

Development and testing of a decision aid on goals of care for advanced dementia.

Science.gov (United States)

Einterz, Seth F; Gilliam, Robin; Lin, Feng Chang; McBride, J Marvin; Hanson, Laura C

2014-04-01

Decision aids are effective to improve decision-making, yet they are rarely tested in nursing homes (NHs). Study objectives were to (1) examine the feasibility of a goals of care (GOC) decision aid for surrogate decision-makers (SDMs) of persons with dementia; and (2) to test its effect on quality of communication and decision-making. Pre-post intervention to test a GOC decision aid intervention for SDMs for persons with dementia in NHs. Investigators collected data from reviews of resident health records and interviews with SDMs at baseline and 3-month follow-up. Two NHs in North Carolina. Eighteen residents who were over 65 years of age, had moderate to severe dementia on the global deterioration scale (5, 6, or 7), and an English-speaking surrogate decision-maker. (1) GOC decision aid video viewed by the SDM and (2) a structured care plan meeting between the SDM and interdisciplinary NH team. Surrogate knowledge, quality of communication with health care providers, surrogate-provider concordance on goals of care, and palliative care domains addressed in the care plan. Eighty-nine percent of the SDMs thought the decision aid was relevant to their needs. After viewing the video decision aid, SDMs increased the number of correct responses on knowledge-based questions (12.5 vs 14.2; P communication scores (6.1 vs 6.8; P = .01) and improved concordance on primary goal of care with NH team (50% vs 78%; P = .003). The number of palliative care domains addressed in the care plan increased (1.8 vs 4.3; P decision-support intervention piloted in this study was feasible and relevant for surrogate decision-makers of persons with advanced dementia in NHs, and it improved quality of communication between SDM and NH providers. A larger randomized clinical trial is underway to provide further evidence of the effects of this decision aid intervention. Copyright © 2014 American Medical Directors Association, Inc. Published by Elsevier Inc. All rights reserved.

Development and preliminary user testing of the DCIDA (Dynamic computer interactive decision application) for 'nudging' patients towards high quality decisions.

Science.gov (United States)

Bansback, Nick; Li, Linda C; Lynd, Larry; Bryan, Stirling

2014-08-01

Patient decision aids (PtDA) are developed to facilitate informed, value-based decisions about health. Research suggests that even when informed with necessary evidence and information, cognitive errors can prevent patients from choosing the option that is most congruent with their own values. We sought to utilize principles of behavioural economics to develop a computer application that presents information from conventional decision aids in a way that reduces these errors, subsequently promoting higher quality decisions. The Dynamic Computer Interactive Decision Application (DCIDA) was developed to target four common errors that can impede quality decision making with PtDAs: unstable values, order effects, overweighting of rare events, and information overload. Healthy volunteers were recruited to an interview to use three PtDAs converted to the DCIDA on a computer equipped with an eye tracker. Participants were first used a conventional PtDA, and then subsequently used the DCIDA version. User testing was assessed based on whether respondents found the software both usable: evaluated using a) eye-tracking, b) the system usability scale, and c) user verbal responses from a 'think aloud' protocol; and useful: evaluated using a) eye-tracking, b) whether preferences for options were changed, and c) and the decisional conflict scale. Of the 20 participants recruited to the study, 11 were male (55%), the mean age was 35, 18 had at least a high school education (90%), and 8 (40%) had a college or university degree. Eye-tracking results, alongside a mean system usability scale score of 73 (range 68-85), indicated a reasonable degree of usability for the DCIDA. The think aloud study suggested areas for further improvement. The DCIDA also appeared to be useful to participants wherein subjects focused more on the features of the decision that were most important to them (21% increase in time spent focusing on the most important feature). Seven subjects (25%) changed their

A theory-based decision aid for patients with cancer: results of feasibility and acceptability testing of DecisionKEYS for cancer.

Science.gov (United States)

Hollen, Patricia J; Gralla, Richard J; Jones, Randy A; Thomas, Christopher Y; Brenin, David R; Weiss, Geoffrey R; Schroen, Anneke T; Petroni, Gina R

2013-03-01

Appropriate utilization of treatment is a goal for all patients undergoing cancer treatment. Proper treatment maximizes benefit and limits exposure to unnecessary measures. This report describes findings of the feasibility and acceptability of implementing a short, clinic-based decision aid and presents an in-depth clinical profile of the participants. This descriptive study used a prospective, quantitative approach to obtain the feasibility and acceptability of a decision aid (DecisionKEYS for Balancing Choices) for use in clinical settings. It combined results of trials of patients with three different common malignancies. All groups used the same decision aid series. Participants included 80 patients with solid tumors (22 with newly diagnosed breast cancer, 19 with advanced prostate cancer, and 39 with advanced lung cancer) and their 80 supporters as well as their physicians and nurses, for a total of 160 participants and 10 health professionals. The decision aid was highly acceptable to patient and supporter participants in all diagnostic groups. It was feasible for use in clinic settings; the overall value was rated highly. Of six physicians, all found the interactive format with the help of the nurse as feasible and acceptable. Nurses also rated the decision aid favorably. This intervention provides the opportunity to enhance decision making about cancer treatment and warrants further study including larger and more diverse groups. Strengths of the study included a theoretical grounding, feasibility testing of a practical clinic-based intervention, and summative evaluation of acceptability of the intervention by patient and supporter pairs. Further research also is needed to test the effectiveness of the decision aid in diverse clinical settings and to determine if this intervention can decrease overall costs.

New Paradigms for Computer Aids to Invention.

Science.gov (United States)

Langston, M. Diane

Many people are interested in computer aids to rhetorical invention and want to know how to evaluate an invention aid, what the criteria are for a good one, and how to assess the trade-offs involved in buying one product or another. The frame of reference for this evaluation is an "old paradigm," which treats the computer as if it were…

Point-of-views representation for hypothetical reasoning: application to decision-aid

International Nuclear Information System (INIS)

Diaz, Antoine

1992-01-01

Most of the knowledge based Decision Support Systems must deal with two difficulties in problem solving representation: reasoning with incomplete knowledge and managing contradictory reasoning. We propose a method which answers the question of reasoning revision when a contradiction occurs, while preserving the functionalities of the De Kleer's ATMS System for simulating hypothetical reasoning. As a matter of fact, these functionalities are particularly suitable for decision aiding problems. In order to formalize the ATMS, we use a resolution method called Cat-resolution (Cayrol and Tayrac). This method allows the computation of ATMS functions relating to a set of propositional clauses by saturating this set. Owing to this choice, we can use the same principles as ATMS on the saturation trace. Each clause in the saturated set can be linked to the sets of initial clauses justifying its derivation by Cat-resolution. The reasoning inconsistency is now managed. First the user can identify the source of the inconsistency thanks to the empty clause explanation. Then he can try to restore the reasoning consistency by relaxing at least one of the initial clauses justifying the empty clause. The computation of 'partial' ATMS, representing a point of view in the decision-making problem, is more effective owing to the justifications of the derived clauses. (author) [fr

Computer-Aided Modeling of Lipid Processing Technology

DEFF Research Database (Denmark)

Diaz Tovar, Carlos Axel

2011-01-01

increase along with growing interest in biofuels, the oleochemical industry faces in the upcoming years major challenges in terms of design and development of better products and more sustainable processes to make them. Computer-aided methods and tools for process synthesis, modeling and simulation...... are widely used for design, analysis, and optimization of processes in the chemical and petrochemical industries. These computer-aided tools have helped the chemical industry to evolve beyond commodities toward specialty chemicals and ‘consumer oriented chemicals based products’. Unfortunately...... to develop systematic computer-aided methods (property models) and tools (database) related to the prediction of the necessary physical properties suitable for design and analysis of processes employing lipid technologies. The methods and tools include: the development of a lipid-database (CAPEC...

Promoting Shared Decision Making in Disorders of Sex Development (DSD): Decision Aids and Support Tools.

Science.gov (United States)

Siminoff, L A; Sandberg, D E

2015-05-01

Specific complaints and grievances from adult patients with disorders of sex development (DSD), and their advocates center around the lack of information or misinformation they were given about their condition and feeling stigmatized and shamed by the secrecy surrounding their condition and its management. Many also attribute poor sexual function to damaging genital surgery and/or repeated, insensitive genital examinations. These reports suggest the need to reconsider the decision-making process for the treatment of children born with DSD. This paper proposes that shared decision making, an important concept in adult health care, be operationalized for the major decisions commonly encountered in DSD care and facilitated through the utilization of decision aids and support tools. This approach may help patients and their families make informed decisions that are better aligned with their personal values and goals. It may also lead to greater confidence in decision making with greater satisfaction and less regret. A brief review of the past and current approach to DSD decision making is provided, along with a review of shared decision making and decision aids and support tools. A case study explores the need and potential utility of this suggested new approach. © Georg Thieme Verlag KG Stuttgart · New York.

Intelligent Support for a Computer Aided Design Optimisation Cycle

OpenAIRE

B. Dolšak; M. Novak; J. Kaljun

2006-01-01

It is becoming more and more evident that  adding intelligence  to existing computer aids, such as computer aided design systems, can lead to significant improvements in the effective and reliable performance of various engineering tasks, including design optimisation. This paper presents three different intelligent modules to be applied within a computer aided design optimisation cycle to enable more intelligent and less experience-dependent design performance. 

A decision-aiding system: DACFOOD

International Nuclear Information System (INIS)

Despres, A.; Heymes, P.

1994-01-01

The DACFOOD (Decision Aiding for Contaminated FOODstuffs) system provides decision makers with necessary data for the implementation of optimized protection measures in case of radioactive contamination of foodstuffs. The system evaluates the dose impact due to ingestion of these products, calculates the dose reduction after implementation of specific actions and, by combining these actions, assesses several strategies by using their cost-effectiveness ratios. Such evaluations need the description of contamination as radionuclide activities in each foodstuff, and the description of consumers' groups according to their dietary habits. Then it is possible to define areas in which the doses received are reasonably homogeneous in different age classes. If deposition occurs at a period of the year without harvest, the system applies dynamic transfer models to calculate the concentration in future productions. (authors). 2 refs

Encounter Decision Aid vs. Clinical Decision Support or Usual Care to Support Patient-Centered Treatment Decisions in Osteoporosis: The Osteoporosis Choice Randomized Trial II.

Directory of Open Access Journals (Sweden)

Annie LeBlanc

Full Text Available Osteoporosis Choice, an encounter decision aid, can engage patients and clinicians in shared decision making about osteoporosis treatment. Its effectiveness compared to the routine provision to clinicians of the patient's estimated risk of fracture using the FRAX calculator is unknown.Patient-level, randomized, three-arm trial enrolling women over 50 with osteopenia or osteoporosis eligible for treatment with bisphosphonates, where the use of Osteoporosis Choice was compared to FRAX only and to usual care to determine impact on patient knowledge, decisional conflict, involvement in the decision-making process, decision to start and adherence to bisphosphonates.We enrolled 79 women in the three arms. Because FRAX estimation alone and usual care produced similar results, we grouped them for analysis. Compared to these, use of Osteoporosis Choice increased patient knowledge (median score 6 vs. 4, p = .01, improved understanding of fracture risk and risk reduction with bisphosphonates (p = .01 and p<.0001, respectively, had no effect on decision conflict, and increased patient engagement in the decision making process (OPTION scores 57% vs. 43%, p = .001. Encounters with the decision aid were 0.8 minutes longer (range: 33 minutes shorter to 3.0 minutes longer. There were twice as many patients receiving and filling prescriptions in the decision aid arm (83% vs. 40%, p = .07; medication adherence at 6 months was no different across arms.Supporting both patients and clinicians during the clinical encounter with the Osteoporosis Choice decision aid efficiently improves treatment decision making when compared to usual care with or without clinical decision support with FRAX results.clinical trials.gov NCT00949611.

Online, Interactive Option Grid Patient Decision Aids and their Effect on User Preferences.

Science.gov (United States)

Scalia, Peter; Durand, Marie-Anne; Kremer, Jan; Faber, Marjan; Elwyn, Glyn

2018-01-01

Randomized trials have shown that patient decision aids can modify users' preferred healthcare options, but research has yet to identify the attributes embedded in these tools that cause preferences to shift. The aim of this study was to investigate people's preferences as they used decision aids for 5 health decisions and, for each of the following: 1) determine if using the interactive Option Grid led to a pre-post shift in preferences; 2) determine which frequently asked questions (FAQs) led to preference shifts; 3) determine the FAQs that were rated as the most important as users compared options. Interactive Option Grid decision aids enable users to view attributes of available treatment or screening options, rate their importance, and specify their preferred options before and after decision aid use. The McNemar-Bowker paired test was used to compare stated pre-post preferences. Multinomial logistic regressions were conducted to investigate possible associations between covariates and preference shifts. Overall, 626 users completed the 5 most-used tools: 1) Amniocentesis test: yes or no? ( n = 73); 2) Angina: treatment options ( n = 88); 3) Breast cancer: surgical options ( n = 265); 4) Prostate Specific Antigen (PSA) test: yes or no? ( n = 82); 5) Statins for heart disease risk: yes or no? ( n = 118). The breast cancer, PSA, and statins Option Grid decision aids generated significant preference shifts. Generally, users shifted their preference when presented with the description of the available treatment options, and the risk associated with each option. The use of decision aids for some, but not all health decisions, was accompanied by a shift in user preferences. Users typically valued information associated with risks, and chose more risk averse options after completing the interactive tool.

Aiding Lay Decision Making Using a Cognitive Competencies Approach

OpenAIRE

Maule, A. J.; Maule, Simon

2016-01-01

Two prescriptive approaches have evolved to aid human decision making: just in time interventions that provide support as a decision is being made; and just in case interventions that educate people about future events that they may encounter so that they are better prepared to make an informed decision when these events occur. We review research on these two approaches developed in the context of supporting everyday decisions such as choosing an apartment, a financial product or a medical pr...

Computer Aided Solvent Selection and Design Framework

DEFF Research Database (Denmark)

Mitrofanov, Igor; Conte, Elisa; Abildskov, Jens

and computer-aided tools and methods for property prediction and computer-aided molecular design (CAMD) principles. This framework is applicable for solvent selection and design in product design as well as process design. The first module of the framework is dedicated to the solvent selection and design...... in terms of: physical and chemical properties (solvent-pure properties); Environment, Health and Safety (EHS) characteristic (solvent-EHS properties); operational properties (solvent–solute properties). 3. Performing the search. The search step consists of two stages. The first is a generation and property...... identification of solvent candidates using special software ProCAMD and ProPred, which are the implementations of computer-aided molecular techniques. The second consists of assigning the RS-indices following the reaction–solvent and then consulting the known solvent database and identifying the set of solvents...

Computer Aided Drug Design: Success and Limitations.

Science.gov (United States)

Baig, Mohammad Hassan; Ahmad, Khurshid; Roy, Sudeep; Ashraf, Jalaluddin Mohammad; Adil, Mohd; Siddiqui, Mohammad Haris; Khan, Saif; Kamal, Mohammad Amjad; Provazník, Ivo; Choi, Inho

2016-01-01

Over the last few decades, computer-aided drug design has emerged as a powerful technique playing a crucial role in the development of new drug molecules. Structure-based drug design and ligand-based drug design are two methods commonly used in computer-aided drug design. In this article, we discuss the theory behind both methods, as well as their successful applications and limitations. To accomplish this, we reviewed structure based and ligand based virtual screening processes. Molecular dynamics simulation, which has become one of the most influential tool for prediction of the conformation of small molecules and changes in their conformation within the biological target, has also been taken into account. Finally, we discuss the principles and concepts of molecular docking, pharmacophores and other methods used in computer-aided drug design.

Facilitating Integration of Electron Beam Lithography Devices with Interactive Videodisc, Computer-Based Simulation and Job Aids.

Science.gov (United States)

Von Der Linn, Robert Christopher

A needs assessment of the Grumman E-Beam Systems Group identified the requirement for additional skill mastery for the engineers who assemble, integrate, and maintain devices used to manufacture integrated circuits. Further analysis of the tasks involved led to the decision to develop interactive videodisc, computer-based job aids to enable…

Trustworthy patient decision aids: a qualitative analysis addressing the risk of competing interests

NARCIS (Netherlands)

Elwyn, G.; Dannenberg, M.; Blaine, A.; Poddar, U.; Durand, M.A.

2016-01-01

OBJECTIVE: Our aim in this study was to examine the competing interest policies and procedures of organisations who develop and maintain patient decision aids. DESIGN: Descriptive and thematic analysis of data collected from a cross-sectional survey of patient decision aid developer's competing

Dual-scan technique for the customization of zirconia computer-aided design/computer-aided manufacturing frameworks.

Science.gov (United States)

Andreiuolo, Rafael Ferrone; Sabrosa, Carlos Eduardo; Dias, Katia Regina H Cervantes

2013-09-01

The use of bi-layered all-ceramic crowns has continuously grown since the introduction of computer-aided design/computer-aided manufacturing (CAD/CAM) zirconia cores. Unfortunately, despite the outstanding mechanical properties of zirconia, problems related to porcelain cracking or chipping remain. One of the reasons for this is that ceramic copings are usually milled to uniform thicknesses of 0.3-0.6 mm around the whole tooth preparation. This may not provide uniform thickness or appropriate support for the veneering porcelain. To prevent these problems, the dual-scan technique demonstrates an alternative that allows the restorative team to customize zirconia CAD/CAM frameworks with adequate porcelain thickness and support in a simple manner.

Selecting a risk-based tool to aid in decision making

Energy Technology Data Exchange (ETDEWEB)

Bendure, A.O.

1995-03-01

Selecting a risk-based tool to aid in decision making is as much of a challenge as properly using the tool once it has been selected. Failure to consider customer and stakeholder requirements and the technical bases and differences in risk-based decision making tools will produce confounding and/or politically unacceptable results when the tool is used. Selecting a risk-based decisionmaking tool must therefore be undertaken with the same, if not greater, rigor than the use of the tool once it is selected. This paper presents a process for selecting a risk-based tool appropriate to a set of prioritization or resource allocation tasks, discusses the results of applying the process to four risk-based decision-making tools, and identifies the ``musts`` for successful selection and implementation of a risk-based tool to aid in decision making.

Computer aided product design

DEFF Research Database (Denmark)

Constantinou, Leonidas; Bagherpour, Khosrow; Gani, Rafiqul

1996-01-01

A general methodology for Computer Aided Product Design (CAPD) with specified property constraints which is capable of solving a large range of problems is presented. The methodology employs the group contribution approach, generates acyclic, cyclic and aromatic compounds of various degrees......-liquid equilibria (LLE), solid-liquid equilibria (SLE) and gas solubility. Finally, a computer program based on the extended methodology has been developed and the results from five case studies highlighting various features of the methodology are presented....

Perceptual Computing Aiding People in Making Subjective Judgments

CERN Document Server

Mendel, Jerry

2010-01-01

Explains for the first time how "computing with words" can aid in making subjective judgments. Lotfi Zadeh, the father of fuzzy logic, coined the phrase "computing with words" (CWW) to describe a methodology in which the objects of computation are words and propositions drawn from a natural language. Perceptual Computing explains how to implement CWW to aid in the important area of making subjective judgments, using a methodology that leads to an interactive device—a "Perceptual Computer"—that propagates random and linguistic uncertainties into the subjective judg

Remote handling prospects. Computer aided remote handling

International Nuclear Information System (INIS)

Vertut, J.

1984-01-01

Mechanical manipulators, electrical control manipulators and computer aided manipulators were successively developed. The aim of computer aided manipulators is the realization of complex or tricky job in adverse environment but man is required for non routine work or for situation in evolution. French effort is developed in the frame of the project automation and advanced robotics and new problems have to be solved particularly at the interface man/machine [fr

Computer-Aided Sustainable Process Synthesis-Design and Analysis

DEFF Research Database (Denmark)

Kumar Tula, Anjan

-groups is that, the performance of the entire process can be evaluated from the contributions of the individual process-groups towards the selected flowsheet property (for example, energy consumed). The developed flowsheet property models include energy consumption, carbon footprint, product recovery, product......Process synthesis involves the investigation of chemical reactions needed to produce the desired product, selection of the separation techniques needed for downstream processing, as well as taking decisions on sequencing the involved separation operations. For an effective, efficient and flexible...... focuses on the development and application of a computer-aided framework for sustainable synthesis-design and analysis of process flowsheets by generating feasible alternatives covering the entire search space and includes analysis tools for sustainability, LCA and economics. The synthesis method is based...

Computational Complexity and Human Decision-Making.

Science.gov (United States)

Bossaerts, Peter; Murawski, Carsten

2017-12-01

The rationality principle postulates that decision-makers always choose the best action available to them. It underlies most modern theories of decision-making. The principle does not take into account the difficulty of finding the best option. Here, we propose that computational complexity theory (CCT) provides a framework for defining and quantifying the difficulty of decisions. We review evidence showing that human decision-making is affected by computational complexity. Building on this evidence, we argue that most models of decision-making, and metacognition, are intractable from a computational perspective. To be plausible, future theories of decision-making will need to take into account both the resources required for implementing the computations implied by the theory, and the resource constraints imposed on the decision-maker by biology. Copyright © 2017 Elsevier Ltd. All rights reserved.

Development and preliminary user testing of the DCIDA (Dynamic computer interactive decision application) for ‘nudging’ patients towards high quality decisions

Science.gov (United States)

2014-01-01

Background Patient decision aids (PtDA) are developed to facilitate informed, value-based decisions about health. Research suggests that even when informed with necessary evidence and information, cognitive errors can prevent patients from choosing the option that is most congruent with their own values. We sought to utilize principles of behavioural economics to develop a computer application that presents information from conventional decision aids in a way that reduces these errors, subsequently promoting higher quality decisions. Method The Dynamic Computer Interactive Decision Application (DCIDA) was developed to target four common errors that can impede quality decision making with PtDAs: unstable values, order effects, overweighting of rare events, and information overload. Healthy volunteers were recruited to an interview to use three PtDAs converted to the DCIDA on a computer equipped with an eye tracker. Participants were first used a conventional PtDA, and then subsequently used the DCIDA version. User testing was assessed based on whether respondents found the software both usable: evaluated using a) eye-tracking, b) the system usability scale, and c) user verbal responses from a ‘think aloud’ protocol; and useful: evaluated using a) eye-tracking, b) whether preferences for options were changed, and c) and the decisional conflict scale. Results Of the 20 participants recruited to the study, 11 were male (55%), the mean age was 35, 18 had at least a high school education (90%), and 8 (40%) had a college or university degree. Eye-tracking results, alongside a mean system usability scale score of 73 (range 68–85), indicated a reasonable degree of usability for the DCIDA. The think aloud study suggested areas for further improvement. The DCIDA also appeared to be useful to participants wherein subjects focused more on the features of the decision that were most important to them (21% increase in time spent focusing on the most important feature

Rough set and rule-based multicriteria decision aiding

Directory of Open Access Journals (Sweden)

Roman Slowinski

2012-08-01

Full Text Available The aim of multicriteria decision aiding is to give the decision maker a recommendation concerning a set of objects evaluated from multiple points of view called criteria. Since a rational decision maker acts with respect to his/her value system, in order to recommend the most-preferred decision, one must identify decision maker's preferences. In this paper, we focus on preference discovery from data concerning some past decisions of the decision maker. We consider the preference model in the form of a set of "if..., then..." decision rules discovered from the data by inductive learning. To structure the data prior to induction of rules, we use the Dominance-based Rough Set Approach (DRSA. DRSA is a methodology for reasoning about data, which handles ordinal evaluations of objects on considered criteria and monotonic relationships between these evaluations and the decision. We review applications of DRSA to a large variety of multicriteria decision problems.

Development and pilot testing of a decision aid for surrogates of patients with prolonged mechanical ventilation

Science.gov (United States)

Cox, Christopher E.; Lewis, Carmen L.; Hanson, Laura C.; Hough, Catherine L.; Kahn, Jeremy M.; White, Douglas B.; Song, Mi-Kyung; Tulsky, James A.; Carson, Shannon S.

2013-01-01

Objective Shared decision making is inadequate in intensive care units (ICUs). Decision aids can improve decision making quality, though their role in an ICU setting is unclear. We aimed to develop and pilot test a decision aid for shared decision makers of patients undergoing prolonged mechanical ventilation. Setting ICUs at three medical centers. Subjects 53 surrogate decision makers and 58 physicians. Design and interventions We developed the decision aid using defined methodological guidelines. After an iterative revision process, formative cognitive testing was performed among surrogate-physician dyads. Next, we compared the decision aid to usual care control in a prospective, before/after design study. Measurements and main results Primary outcomes were physician-surrogate discordance for expected patient survival, comprehension of relevant medical information, and the quality of communication. Compared to control, the intervention group had lower surrogate-physician discordance (7 [10] vs 43 [21]), greater comprehension (11.4 [0.7] vs 6.1 [3.7]), and improved quality of communication (8.7 [1.3] vs 8.4 [1.3]) (all ppost-intervention. Hospital costs were lower in the intervention group ($110,609 vs $178,618; p=0.044); mortality did not differ by group (38% vs 50%, p=0.95). 94% of surrogates and 100% of physicians reported that the decision aid was useful in decision making. Conclusion We developed a prolonged mechanical ventilation decision aid that is feasible, acceptable, and associated with both improved decision making quality and less resource utilization. Further evaluation using a randomized controlled trial design is needed to evaluate the decision aid's effect on long-term patient and surrogate outcomes. PMID:22635048

Cultural targeting and tailoring of shared decision making technology: a theoretical framework for improving the effectiveness of patient decision aids in culturally diverse groups.

Science.gov (United States)

Alden, Dana L; Friend, John; Schapira, Marilyn; Stiggelbout, Anne

2014-03-01

Patient decision aids are known to positively impact outcomes critical to shared decision making (SDM), such as gist knowledge and decision preparedness. However, research on the potential improvement of these and other important outcomes through cultural targeting and tailoring of decision aids is very limited. This is the case despite extensive evidence supporting use of cultural targeting and tailoring to improve the effectiveness of health communications. Building on prominent psychological theory, we propose a two-stage framework incorporating cultural concepts into the design process for screening and treatment decision aids. The first phase recommends use of cultural constructs, such as collectivism and individualism, to differentially target patients whose cultures are known to vary on these dimensions. Decision aid targeting is operationalized through use of symbols and values that appeal to members of the given culture. Content dimensions within decision aids that appear particularly appropriate for targeting include surface level visual characteristics, language, beliefs, attitudes and values. The second phase of the framework is based on evidence that individuals vary in terms of how strongly cultural norms influence their approach to problem solving and decision making. In particular, the framework hypothesizes that differences in terms of access to cultural mindsets (e.g., access to interdependent versus independent self) can be measured up front and used to tailor decision aids. Thus, the second phase in the framework emphasizes the importance of not only targeting decision aid content, but also tailoring the information to the individual based on measurement of how strongly he/she is connected to dominant cultural mindsets. Overall, the framework provides a theory-based guide for researchers and practitioners who are interested in using cultural targeting and tailoring to develop and test decision aids that move beyond a "one-size fits all" approach

The Pathways fertility preservation decision aid website for women with cancer: development and field testing.

Science.gov (United States)

Woodard, Terri L; Hoffman, Aubri S; Covarrubias, Laura A; Holman, Deborah; Schover, Leslie; Bradford, Andrea; Hoffman, Derek B; Mathur, Aakrati; Thomas, Jerah; Volk, Robert J

2018-02-01

To improve survivors' awareness and knowledge of fertility preservation counseling and treatment options, this study engaged survivors and providers to design, develop, and field-test Pathways: a fertility preservation patient decision aid website for young women with cancer©. Using an adapted user-centered design process, our stakeholder advisory group and research team designed and optimized the Pathways patient decision aid website through four iterative cycles of review and revision with clinicians (n = 21) and survivors (n = 14). Field-testing (n = 20 survivors) assessed post-decision aid scores on the Fertility Preservation Knowledge Scale, feasibility of assessing women's decision-making values while using the website, and website usability/acceptability ratings. Iterative stakeholder engagement optimized the Pathways decision aid website to meet survivors' and providers' needs, including providing patient-friendly information and novel features such as interactive value clarification exercises, testimonials that model shared decision making, financial/referral resources, and a printable personal summary. Survivors scored an average of 8.2 out of 13 (SD 1.6) on the Fertility Preservation Knowledge Scale. They rated genetic screening and having a biological child as strong factors in their decision-making, and 71% indicated a preference for egg freezing. Most women (> 85%) rated Pathways favorably, and all women (100%) said they would recommend it to other women. The Pathways decision aid is a usable and acceptable tool to help women learn about fertility preservation. The Pathways decision aid may help women make well-informed values-based decisions and prevent future infertility-related distress.

Computer aided design for the nuclear industry

International Nuclear Information System (INIS)

Basson, Keith

1986-01-01

The paper concerns the new computer aided design (CAD) centre for the United Kingdom nuclear industry, and its applications. A description of the CAD system is given, including the current projects at the CAD centre. Typical applications of the 3D CAD plant based models, stress analysis studies, and the extraction of data from CAD drawings to produce associated documentation, are all described. Future developments using computer aided design systems are also considered. (U.K.)

Torsional strength of computer-aided design/computer-aided manufacturing-fabricated esthetic orthodontic brackets.

Science.gov (United States)

Alrejaye, Najla; Pober, Richard; Giordano Ii, Russell

2017-01-01

To fabricate orthodontic brackets from esthetic materials and determine their fracture resistance during archwire torsion. Computer-aided design/computer-aided manufacturing technology (Cerec inLab, Sirona) was used to mill brackets with a 0.018 × 0.025-inch slot. Materials used were Paradigm MZ100 and Lava Ultimate resin composite (3M ESPE), Mark II feldspathic porcelain (Vita Zahnfabrik), and In-Ceram YZ zirconia (Vita Zahnfabrik). Ten brackets of each material were subjected to torque by a 0.018 × 0.025-inch stainless steel archwire (G&H) using a specially designed apparatus. The average moments and degrees of torsion necessary to fracture the brackets were determined and compared with those of commercially available alumina brackets, Mystique MB (Dentsply GAC). The YZ brackets were statistically significantly stronger than any other tested material in their resistance to torsion (P brackets. Resistance of MZ100 and Lava Ultimate composite resin brackets to archwire torsion was comparable to commercially available alumina ceramic brackets.

A comparison of web-based versus print-based decision AIDS for prostate cancer screening: participants' evaluation and utilization.

Science.gov (United States)

Tomko, Catherine; Davis, Kimberly M; Luta, George; Krist, Alexander H; Woolf, Steven H; Taylor, Kathryn L

2015-01-01

Patient decision aids facilitate informed decision making for medical tests and procedures that have uncertain benefits. To describe participants' evaluation and utilization of print-based and web-based prostate cancer screening decision aids that were found to improve decisional outcomes in a prior randomized controlled trial. Men completed brief telephone interviews at baseline, one month, and 13 months post-randomization. Participants were primary care patients, 45-70 years old, who received the print-based (N = 628) or web-based decision aid (N = 625) and completed the follow-up assessments. We assessed men's baseline preference for web-based or print-based materials, time spent using the decision aids, comprehension of the overall message, and ratings of the content. Decision aid use was self-reported by 64.3 % (web) and 81.8 % (print) of participants. Significant predictors of decision aid use were race (white vs. non-white, OR = 2.43, 95 % CI: 1.77, 3.35), higher education (OR = 1.68, 95 % CI: 1.06, 2.70) and trial arm (print vs. web, OR = 2.78, 95 % CI: 2.03, 3.83). Multivariable analyses indicated that web-arm participants were more likely to use the website when they preferred web-based materials (OR: 1.91, CI: 1.17, 3.12), whereas use of the print materials was not significantly impacted by a preference for print-based materials (OR: 0.69, CI: 0.38, 1.25). Comprehension of the decision aid message (i.e., screening is an individual decision) did not significantly differ between arms in adjusted analyses (print: 61.9 % and web: 68.2 %, p = 0.42). Decision aid use was independently influenced by race, education, and the decision aid medium, findings consistent with the 'digital divide.' These results suggest that when it is not possible to provide this age cohort with their preferred decision aid medium, print materials will be more highly used than web-based materials. Although there are many advantages to web-based decision aids, providing an option for

Server-Aided Verification Signature with Privacy for Mobile Computing

Directory of Open Access Journals (Sweden)

Lingling Xu

2015-01-01

Full Text Available With the development of wireless technology, much data communication and processing has been conducted in mobile devices with wireless connection. As we know that the mobile devices will always be resource-poor relative to static ones though they will improve in absolute ability, therefore, they cannot process some expensive computational tasks due to the constrained computational resources. According to this problem, server-aided computing has been studied in which the power-constrained mobile devices can outsource some expensive computation to a server with powerful resources in order to reduce their computational load. However, in existing server-aided verification signature schemes, the server can learn some information about the message-signature pair to be verified, which is undesirable especially when the message includes some secret information. In this paper, we mainly study the server-aided verification signatures with privacy in which the message-signature pair to be verified can be protected from the server. Two definitions of privacy for server-aided verification signatures are presented under collusion attacks between the server and the signer. Then based on existing signatures, two concrete server-aided verification signature schemes with privacy are proposed which are both proved secure.

On the Value of Computer-aided Instruction: Thoughts after Teaching Sales Writing in a Computer Classroom.

Science.gov (United States)

Hagge, John

1986-01-01

Focuses on problems encountered with computer-aided writing instruction. Discusses conflicts caused by the computer classroom concept, some general paradoxes and ethical implications of computer-aided instruction. (EL)

Computer-aided system for cryogenic research facilities

International Nuclear Information System (INIS)

Gerasimov, V.P.; Zhelamsky, M.V.; Mozin, I.V.; Repin, S.S.

1994-01-01

A computer-aided system is developed for the more effective choice and optimization of the design and manufacturing technologies of the superconductor for the magnet system of the International Thermonuclear Experimental Reactor (ITER) with the aim to ensure the superconductor certification. The computer-aided system provides acquisition, processing, storage and display of data describing the proceeding tests, the detection of any parameter deviations and their analysis. Besides, it generates commands for the equipment switch off in emergency situations. ((orig.))

Development of an integrated decision support system to aid cognitive activities of operators

International Nuclear Information System (INIS)

Lee, Seung Jun; Seong, Poong Hyun

2007-01-01

As digital and computer technologies have grown, Human-Machine Interfaces (HMIs) have evolved. In safety-critical systems, especially in Nuclear Power Plants (NPPs), HMIs are important for reducing operational costs, the number of necessary operators, and the probability of accident occurrence. Efforts have been made to improve Main Control Room (MCR) interface design and to develop automated or decision support systems to ensure convenient operation and maintenance. In this paper, an integrated decision support system to aid operator cognitive processes is proposed for advanced MCRs of future NPPs. This work suggests the design concept of a decision support system which accounts for an operator's cognitive processes. The proposed system supports not only a particular task, but also the entire operation process based on a human cognitive process model. In this paper, the operator's operation processes are analyzed according to a human cognitive process model and appropriate support systems that support each cognitive process activity are suggested

Freedom and necessity in computer aided composition: A thinking framework and its application

Science.gov (United States)

Kretz, Johannes

This paper presents some of the author's experiences with computer aided composition (CAC): the modeling of physical movements is used to obtain plausible musical gestures in interaction with constraint programming (rule based expert systems) in order to achieve precisely structured, consistent musical material with strong inner logic and syntax in pitch material. The "Constraints Engine" by Michael Laurson implemented in OpenMusic (IRCAM) or PWGL (Sibelius Academy) can be used to set up an interactive framework for composition, which offers a balance of freedom (allowing chance operations and arbitrary decisions of the composer) and necessity (through strict rules as well as through criteria for optimization). Computer Aided Composition is moving far beyond being "algorithmic" or "mechanical". This paper proposes an approach based on evolutionary epistemology (by the Austrian biologist and philosopher Rupert Riedl). The aim is a holistic synthesis of artistic freedom and coherent structures similar to the grown order of nature.

Offering online recommendations with minimum customer input through conjoint-based decision aids

NARCIS (Netherlands)

De Bruyn, Arnaud; Liechty, John C.; Huizingh, Eelko K. R. E.; Lilien, Gary L.

2008-01-01

In their purchase decisions, online customers seek to improve decision quality while limiting search efforts. In practice, many merchants have understood the importance of helping customers in the decision-making process and provide online decision aids to their visitors. In this paper, we show how

Decision aids for respite service choices by carers of people with dementia: development and pilot RCT

Directory of Open Access Journals (Sweden)

Stirling Christine

2012-03-01

Full Text Available Abstract Background Decision aids are often used to assist individuals confronted with a diagnosis of a serious illness to make decisions about treatment options. However, they are rarely utilised to help those with chronic or age related conditions to make decisions about care services. Decision aids should also be useful for carers of people with decreased decisional capacity. These carers' choices must balance health outcomes for themselves and for salient others with relational and value-based concerns, while relying on information from health professionals. This paper reports on a study that both developed and pilot tested a decision aid aimed at assisting carers to make evaluative judgements of community services, particularly respite care. Methods A mixed method sequential study, involving qualitative development and a pilot randomised controlled trial, was conducted in Tasmania, Australia. We undertook 13 semi-structured interviews and three focus groups to inform the development of the decision aid. For the randomised control trial we randomly assigned 31 carers of people with dementia to either receive the service decision aid at the start or end of the study. The primary outcome was measured by comparing the difference in carer burden between the two groups three months after the intervention group received the decision aid. Pilot data was collected from carers using interviewer-administered questionnaires at the commencement of the project, two weeks and 12 weeks later. Results The qualitative data strongly suggest that the intervention provides carers with needed decision support. Most carers felt that the decision aid was useful. The trial data demonstrated that, using the mean change between baseline and three month follow-up, the intervention group had less increase in burden, a decrease in decisional conflict and increased knowledge compared to control group participants. Conclusions While these results must be interpreted with

CAT -- computer aided testing for resonant inspection

International Nuclear Information System (INIS)

Foley, David K.

1998-01-01

Application of computer technology relates to inspection and quality control. The computer aided testing (CAT) can be used to analyze various NDT technologies, such as eddy current, ultrasonics, and resonant inspection

Software For Computer-Aided Design Of Control Systems

Science.gov (United States)

Wette, Matthew

1994-01-01

Computer Aided Engineering System (CAESY) software developed to provide means to evaluate methods for dealing with users' needs in computer-aided design of control systems. Interpreter program for performing engineering calculations. Incorporates features of both Ada and MATLAB. Designed to be flexible and powerful. Includes internally defined functions, procedures and provides for definition of functions and procedures by user. Written in C language.

Computer aided drug design

Science.gov (United States)

Jain, A.

2017-08-01

Computer based method can help in discovery of leads and can potentially eliminate chemical synthesis and screening of many irrelevant compounds, and in this way, it save time as well as cost. Molecular modeling systems are powerful tools for building, visualizing, analyzing and storing models of complex molecular structure that can help to interpretate structure activity relationship. The use of various techniques of molecular mechanics and dynamics and software in Computer aided drug design along with statistics analysis is powerful tool for the medicinal chemistry to synthesis therapeutic and effective drugs with minimum side effect.

Computer-aided design of control systems to meet many requirements

Science.gov (United States)

Schy, A. A.; Adams, W. M., Jr.; Johnson, K. G.

1974-01-01

A method is described for using nonlinear programing in the computer-aided design of airplane control systems. It is assumed that the quality of such systems depends on many criteria. These criteria are included in the constraints vector (instead of attempting to combine them into a single scalar criterion, as is usually done), and the design proceeds through a sequence of nonlinear programing solutions in which the designer varies the specification of sets of requirements levels. The method is applied to design of a lateral stability augmentation system (SAS) for a fighter airplane, in which the requirements vector is chosen from the official handling qualities specifications. Results are shown for several simple SAS configurations designed to obtain desirable handling qualities over all design flight conditions with minimum feedback gains. The choice of the final design for each case is not unique but depends on the designer's decision as to which achievable set of requirements levels represents the best for that system. Results indicate that it may be possible to design constant parameter SAS which can satisfy the most stringent handling qualities requirements for fighter airplanes in all flight conditions. The role of the designer as a decision maker, interacting with the computer program, is discussed. Advantages of this type of designer-computer interaction are emphasized. Desirable extensions of the method are indicated.

COMPUTER-AIDED DATA ACQUISITION FOR COMBUSTION EXPERIMENTS

Science.gov (United States)

The article describes the use of computer-aided data acquisition techniques to aid the research program of the Combustion Research Branch (CRB) of the U.S. EPA's Air and Energy Engineering Research Laboratory (AEERL) in Research Triangle Park, NC, in particular on CRB's bench-sca...

Arriba-lib: association of an evidence-based electronic library of decision aids with communication and decision-making in patients and primary care physicians.

Science.gov (United States)

Hirsch, Oliver; Keller, Heidemarie; Krones, Tanja; Donner-Banzhoff, Norbert

2012-03-01

In shared decision-making, patients are empowered to actively ask questions and participate in decisions about their healthcare based on their preferences and values. Decision aids should help patients make informed choices among diagnostic or treatment options by delivering evidence-based information on options and outcomes; however, they have rarely been field tested, especially in the primary care context. We therefore evaluated associations between the use of an interactive, transactional and evidence-based library of decision aids (arriba-lib) and communication and decision-making in patients and physicians in the primary care context. Our electronic library of decision aids ('arriba-lib') includes evidence-based modules for cardiovascular prevention, diabetes, coronary heart disease, atrial fibrillation and depression. Twenty-nine primary care physicians recruited 192 patients. We used questionnaires to ask patients and physicians about their experiences with and attitudes towards the programme. Patients were interviewed via telephone 2 months after the consultation. Data were analysed by general estimation equations, cross tab analyses and by using effect sizes. Only a minority (8.9%) of the consultations were felt to be too long because physicians said consultations were unacceptably extended by arriba-lib. We found a negative association between the detailedness of the discussion of the clinical problem's definition and the age of the patients. Physicians discuss therapeutic options in less detail with patients who have a formal education of less than 8 years. Patients who were counselled by a physician with no experience in using a decision aid more often reported that they do not remember being counselled with the help of a decision aid or do not wish to be counselled again with a decision aid. Arriba-lib has positive associations to the decision-making process in patients and physicians. It can also be used with older age groups and patients with less

Shared decision making and patient decision aids: knowledge, attitudes, and practices among Hawai'i physicians.

Science.gov (United States)

Alden, Dana L; Friend, John; Chun, Maria B J

2013-11-01

As the health care field moves toward patient-centered care (PCC), increasing emphasis has been placed on the benefits of patient decision aids for promoting shared decision making (SDM). This study provides a baseline measure of knowledge, attitudes, and practices (KAP) among Hawai'i's physicians with respect to patient decision aids (DAs). Physicians throughout the State of Hawai'i were invited to complete a survey assessing their knowledge, attitudes, and practices with respect to the clinical use of DAs. One hundred and seventy four valid surveys were analyzed. Reported awareness and use of DAs were low, but recognition of the benefits of SDM and openness to the use of DAs were very high. The leading perceived barriers to the implementation of DAs were lack of awareness, lack of resources, and limited physician time to learn about DA technology. However, a significant majority of the respondents reported that DAs could empower patients by improving knowledge (88%), increasing satisfaction with the consultation process (81%), and increasing compliance (74%). Among physicians currently employing DAs, use of brochures or options matrix sheets was the most common aid tool. However, leading recommended DA formats were paper-based brochures for clinic use (75%) and interactive online website programs for outside clinic use (73.5%). Given growing emphasis on the PCC model and the recognized desire of many patients to participate in the medical decision making process, positive responses toward SDM and the use of DAs by Hawai'i physicians are promising.

Coaching patients in the use of decision and communication aids: RE-AIM evaluation of a patient support program

OpenAIRE

Belkora, Jeff; Volz, Shelley; Loth, Meredith; Teng, Alexandra; Zarin-Pass, Margot; Moore, Dan; Esserman, Laura

2015-01-01

Background Decision aids educate patients about treatment options and outcomes. Communication aids include question lists, consultation summaries, and audio-recordings. In efficacy studies, decision aids increased patient knowledge, while communication aids increased patient question-asking and information recall. Starting in 2004, we trained successive cohorts of post-baccalaureate, pre-medical interns to coach patients in the use of decision and communication aids at our university-based br...

Computer aided safety analysis

International Nuclear Information System (INIS)

1988-05-01

The document reproduces 20 selected papers from the 38 papers presented at the Technical Committee/Workshop on Computer Aided Safety Analysis organized by the IAEA in co-operation with the Institute of Atomic Energy in Otwock-Swierk, Poland on 25-29 May 1987. A separate abstract was prepared for each of these 20 technical papers. Refs, figs and tabs

Reduction in uptake of PSA tests following decision aids: systematic review of current aids and their evaluations.

NARCIS (Netherlands)

Evans, R.; Edwards, A.; Brett, J.; Bradburn, M.; Watson, E.; Austoker, J.; Elwyn, G.

2005-01-01

A man's decision to have a prostate-specific antigen (PSA) test should be an informed one. We undertook a systematic review to identify and appraise PSA decision aids and evaluations. We searched 15 electronic databases and hand-searched key journals. We also contacted key authors and organisations.

Adhesive Bonding to Computer-aided Design/ Computer-aided Manufacturing Esthetic Dental Materials: An Overview.

Science.gov (United States)

Awad, Mohamed Moustafa; Alqahtani, H; Al-Mudahi, A; Murayshed, M S; Alrahlah, A; Bhandi, Shilpa H

2017-07-01

To review the adhesive bonding to different computer-aided design/computer-aided manufacturing (CAD/CAM) esthetic restorative materials. The use of CAD/CAM esthetic restorative materials has gained popularity in recent years. Several CAD/ CAM esthetic restorative materials are commercially available. Adhesive bonding is a major determinant of success of CAD/ CAM restorations. Review result: An account of the currently available bonding strategies are discussed with their rationale in various CAD/ CAM materials. Different surface treatment methods as well as adhesion promoters can be used to achieve reliable bonding of CAD/CAM restorative materials. Selection of bonding strategy to such material is determined based on its composition. Further evidence is required to evaluate the effect of new surface treatment methods, such as nonthermal atmospheric plasma and self-etching ceramic primer on bonding to different dental ceramics. An understanding of the currently available bonding strategies to CA/CAM materials can help the clinician to select the most indicated system for each category of materials.

[Key points for esthetic rehabilitation of anterior teeth using chair-side computer aided design and computer aided manufacture technique].

Science.gov (United States)

Yang, J; Feng, H L

2018-04-09

With the rapid development of the chair-side computer aided design and computer aided manufacture (CAD/CAM) technology, its accuracy and operability of have been greatly improved in recent years. Chair-side CAD/CAM system may produce all kinds of indirect restorations, and has the advantages of rapid, accurate and stable production. It has become the future development direction of Stomatology. This paper describes the clinical application of the chair-side CAD/CAM technology for anterior aesthetic restorations from the aspects of shade and shape.

Modelling elderly cardiac patients decision making using Cognitive Work Analysis: identifying requirements for patient decision aids.

Science.gov (United States)

Dhukaram, Anandhi Vivekanandan; Baber, Chris

2015-06-01

Patients make various healthcare decisions on a daily basis. Such day-to-day decision making can have significant consequences on their own health, treatment, care, and costs. While decision aids (DAs) provide effective support in enhancing patient's decision making, to date there have been few studies examining patient's decision making process or exploring how the understanding of such decision processes can aid in extracting requirements for the design of DAs. This paper applies Cognitive Work Analysis (CWA) to analyse patient's decision making in order to inform requirements for supporting self-care decision making. This study uses focus groups to elicit information from elderly cardiovascular disease (CVD) patients concerning a range of decision situations they face on a daily basis. Specifically, the focus groups addressed issues related to the decision making of CVD in terms of medication compliance, pain, diet and exercise. The results of these focus groups are used to develop high level views using CWA. CWA framework decomposes the complex decision making problem to inform three approaches to DA design: one design based on high level requirements; one based on a normative model of decision-making for patients; and the third based on a range of heuristics that patients seem to use. CWA helps in extracting and synthesising decision making from different perspectives: decision processes, work organisation, patient competencies and strategies used in decision making. As decision making can be influenced by human behaviour like skills, rules and knowledge, it is argued that patients require support to different types of decision making. This paper also provides insights for designers in using CWA framework for the design of effective DAs to support patients in self-management. Copyright © 2015 Elsevier Ireland Ltd. All rights reserved.

Do personal stories make patient decision aids more effective? A critical review of theory and evidence

Science.gov (United States)

2013-01-01

Background Patient decision aids support people to make informed decisions between healthcare options. Personal stories provide illustrative examples of others’ experiences and are seen as a useful way to communicate information about health and illness. Evidence indicates that providing information within personal stories affects the judgments and values people have, and the choices they make, differentially from facts presented in non-narrative prose. It is unclear if including narrative communications within patient decision aids enhances their effectiveness to support people to make informed decisions. Methods A survey of primary empirical research employing a systematic review method investigated the effect of patient decision aids with or without a personal story on people’s healthcare judgements and decisions. Searches were carried out between 2005-2012 of electronic databases (Medline, PsycINFO), and reference lists of identified articles, review articles, and key authors. A narrative analysis described and synthesised findings. Results Of 734 citations identified, 11 were included describing 13 studies. All studies found participants’ judgments and/or decisions differed depending on whether or not their decision aid included a patient story. Knowledge was equally facilitated when the decision aids with and without stories had similar information content. Story-enhanced aids may help people recall information over time and/or their motivation to engage with health information. Personal stories affected both “system 1” (e.g., less counterfactual reasoning, more emotional reactions and perceptions) and “system 2” (e.g., more perceived deliberative decision making, more stable evaluations over time) decision-making strategies. Findings exploring associations with narrative communications, decision quality measures, and different levels of literacy and numeracy were mixed. The pattern of findings was similar for both experimental and real

Multimedia Image Technology and Computer Aided Manufacturing Engineering Analysis

Science.gov (United States)

Nan, Song

2018-03-01

Since the reform and opening up, with the continuous development of science and technology in China, more and more advanced science and technology have emerged under the trend of diversification. Multimedia imaging technology, for example, has a significant and positive impact on computer aided manufacturing engineering in China. From the perspective of scientific and technological advancement and development, the multimedia image technology has a very positive influence on the application and development of computer-aided manufacturing engineering, whether in function or function play. Therefore, this paper mainly starts from the concept of multimedia image technology to analyze the application of multimedia image technology in computer aided manufacturing engineering.

Coaching patients in the use of decision and communication aids: RE-AIM evaluation of a patient support program.

Science.gov (United States)

Belkora, Jeff; Volz, Shelley; Loth, Meredith; Teng, Alexandra; Zarin-Pass, Margot; Moore, Dan; Esserman, Laura

2015-05-28

Decision aids educate patients about treatment options and outcomes. Communication aids include question lists, consultation summaries, and audio-recordings. In efficacy studies, decision aids increased patient knowledge, while communication aids increased patient question-asking and information recall. Starting in 2004, we trained successive cohorts of post-baccalaureate, pre-medical interns to coach patients in the use of decision and communication aids at our university-based breast cancer clinic. From July 2005 through June 2012, we used the RE-AIM framework to measure Reach, Effectiveness, Adoption, Implementation and Maintenance of our interventions. 1. Reach: Over the study period, our program sent a total of 5,153 decision aids and directly administered 2,004 communication aids. In the most recent program year (2012), out of 1,524 eligible patient appointments, we successfully contacted 1,212 (80%); coached 1,110 (73%) in the self-administered use of decision and communication aids; sent 958 (63%) decision aids; and directly administered communication aids for 419 (27%) patients. In a 2010 survey, coached patients reported self-administering one or more communication aids in 81% of visits 2. Effectiveness: In our pre-post comparisons, decision aids were associated with increased patient knowledge and decreased decisional conflict. Communication aids were associated with increased self-efficacy and number of questions; and with high ratings of patient preparedness and satisfaction 3. Adoption: Among visitors sent decision aids, 82% of survey respondents reviewed some or all; among those administered communication aids, 86% reviewed one or more after the visit 4. Through continuous quality adaptations, we increased the proportion of available staff time used for patient support (i.e. exploitation of workforce capacity) from 29% in 2005 to 84% in 2012 5. Maintenance: The main barrier to sustainability was the cost of paid intern labor. We addressed this by

Integrated computer-aided design using minicomputers

Science.gov (United States)

Storaasli, O. O.

1980-01-01

Computer-Aided Design/Computer-Aided Manufacturing (CAD/CAM), a highly interactive software, has been implemented on minicomputers at the NASA Langley Research Center. CAD/CAM software integrates many formerly fragmented programs and procedures into one cohesive system; it also includes finite element modeling and analysis, and has been interfaced via a computer network to a relational data base management system and offline plotting devices on mainframe computers. The CAD/CAM software system requires interactive graphics terminals operating at a minimum of 4800 bits/sec transfer rate to a computer. The system is portable and introduces 'interactive graphics', which permits the creation and modification of models interactively. The CAD/CAM system has already produced designs for a large area space platform, a national transonic facility fan blade, and a laminar flow control wind tunnel model. Besides the design/drafting element analysis capability, CAD/CAM provides options to produce an automatic program tooling code to drive a numerically controlled (N/C) machine. Reductions in time for design, engineering, drawing, finite element modeling, and N/C machining will benefit productivity through reduced costs, fewer errors, and a wider range of configuration.

Correction of facial and mandibular asymmetry using a computer aided design/computer aided manufacturing prefabricated titanium implant.

Science.gov (United States)

Watson, Jason; Hatamleh, Muhanad; Alwahadni, Ahed; Srinivasan, Dilip

2014-05-01

Patients with significant craniofacial asymmetry may have functional problems associated with their occlusion and aesthetic concerns related to the imbalance in soft and hard tissue profiles. This report details a case of facial asymmetry secondary to left mandible angle deficiency due to undergoing previous radiotherapy. We describe the correction of the bony deformity using computer aided design/computer aided manufacturing custom-made titanium onlay using novel direct metal laser sintering. The direct metal laser sintering onlay proved a very accurate operative fit and showed a good aesthetic correction of the bony defect with no reported complications postoperatively. It is a useful low-morbidity technique, and there is no resorption or associated donor-site complications.

Use of a patient decision aid for prenatal screening for Down syndrome: what do pregnant women say?

NARCIS (Netherlands)

Portocarrero, M.E.; Giguere, A.M.; Lepine, J.; Garvelink, M.M.; Robitaille, H.; Delanoe, A.; Levesque, I.; Wilson, B.J.; Rousseau, F.; Legare, F.

2017-01-01

BACKGROUND: Patient decision aids (PtDAs) help people make difficult, values-sensitive decisions. Prenatal screening for assessing the risk of genetic conditions in the fetus is one such decision and patient decision aids are rarely used in this clinical context. We sought to identify factors

Computer aided plant engineering: An analysis and suggestions for computer use

International Nuclear Information System (INIS)

Leinemann, K.

1979-09-01

To get indications to and boundary conditions for computer use in plant engineering, an analysis of the engineering process was done. The structure of plant engineering is represented by a network of substaks and subsets of data which are to be manipulated. Main tool for integration of CAD-subsystems in plant engineering should be a central database which is described by characteristical requirements and a possible simple conceptual schema. The main features of an interactive system for computer aided plant engineering are shortly illustrated by two examples. The analysis leads to the conclusion, that an interactive graphic system for manipulation of net-like structured data, usable for various subtasks, should be the base for computer aided plant engineering. (orig.) [de

Computer-Aided Detection of Kidney Tumor on Abdominal Computed Tomography Scans

International Nuclear Information System (INIS)

Kim, D.Y.; Park, J.W.

2004-01-01

Purpose: To implement a computer-aided detection system for kidney segmentation and kidney tumor detection on abdominal computed tomography (CT) scans. Material and Methods: Abdominal CT images were digitized with a film digitizer, and a gray-level threshold method was used to segment the kidney. Based on texture analysis performed on sample images of kidney tumors, a portion of the kidney tumor was selected as seed region for start point of the region-growing process. The average and standard deviations were used to detect the kidney tumor. Starting at the detected seed region, the region-growing method was used to segment the kidney tumor with intensity values used as an acceptance criterion for a homogeneous test. This test was performed to merge the neighboring region as kidney tumor boundary. These methods were applied on 156 transverse images of 12 cases of kidney tumors scanned using a G.E. Hispeed CT scanner and digitized with a Lumisys LS-40 film digitizer. Results: The computer-aided detection system resulted in a kidney tumor detection sensitivity of 85% and no false-positive findings. Conclusion: This computer-aided detection scheme was useful for kidney tumor detection and gave the characteristics of detected kidney tumors

To the problem of reliability standardization in computer-aided manufacturing at NPP units

International Nuclear Information System (INIS)

Yastrebenetskij, M.A.; Shvyryaev, Yu.V.; Spektor, L.I.; Nikonenko, I.V.

1989-01-01

The problems of reliability standardization in computer-aided manufacturing of NPP units considering the following approaches: computer-aided manufacturing of NPP units as a part of automated technological complex; computer-aided manufacturing of NPP units as multi-functional system, are analyzed. Selection of the composition of reliability indeces for computer-aided manufacturing of NPP units for each of the approaches considered is substantiated

The Impact of Machine Translation and Computer-aided Translation on Translators

Science.gov (United States)

Peng, Hao

2018-03-01

Under the context of globalization, communications between countries and cultures are becoming increasingly frequent, which make it imperative to use some techniques to help translate. This paper is to explore the influence of computer-aided translation on translators, which is derived from the field of the computer-aided translation (CAT) and machine translation (MT). Followed by an introduction to the development of machine and computer-aided translation, it then depicts the technologies practicable to translators, which are trying to analyze the demand of designing the computer-aided translation so far in translation practice, and optimize the designation of computer-aided translation techniques, and analyze its operability in translation. The findings underline the advantages and disadvantages of MT and CAT tools, and the serviceability and future development of MT and CAT technologies. Finally, this thesis probes into the impact of these new technologies on translators in hope that more translators and translation researchers can learn to use such tools to improve their productivity.

Computer aided instrumented Charpy test applied dynamic fracture toughness evaluation system

International Nuclear Information System (INIS)

Kobayashi, Toshiro; Niinomi, Mitsuo

1986-01-01

Micro computer aided data treatment system and personal computer aided data analysis system were applied to the traditional instrumented Charpy impact test system. The analysis of Charpy absorbed energy (E i , E p , E t ) and load (P y , P m ), and the evaluation of dynamic toughness through whole fracture process, i.e. J Id , J R curve and T mat was examined using newly developed computer aided instrumented Charpy impact test system. E i , E p , E t , P y and P m were effectively analyzed using moving average method and printed out automatically by micro computer aided data treatment system. J Id , J R curve and T mat could be measured by stop block test method. Then, J Id , J R curve and T mat were effectively estimated using compliance changing rate method and key curve method on the load-load point displacement curve of single fatigue cracked specimen by personal computer aided data analysis system. (author)

Computer-aided engineering of semiconductor integrated circuits

Science.gov (United States)

Meindl, J. D.; Dutton, R. W.; Gibbons, J. F.; Helms, C. R.; Plummer, J. D.; Tiller, W. A.; Ho, C. P.; Saraswat, K. C.; Deal, B. E.; Kamins, T. I.

1980-07-01

Economical procurement of small quantities of high performance custom integrated circuits for military systems is impeded by inadequate process, device and circuit models that handicap low cost computer aided design. The principal objective of this program is to formulate physical models of fabrication processes, devices and circuits to allow total computer-aided design of custom large-scale integrated circuits. The basic areas under investigation are (1) thermal oxidation, (2) ion implantation and diffusion, (3) chemical vapor deposition of silicon and refractory metal silicides, (4) device simulation and analytic measurements. This report discusses the fourth year of the program.

Computer-Aided Parts Estimation

OpenAIRE

Cunningham, Adam; Smart, Robert

1993-01-01

In 1991, Ford Motor Company began deployment of CAPE (computer-aided parts estimating system), a highly advanced knowledge-based system designed to generate, evaluate, and cost automotive part manufacturing plans. cape is engineered on an innovative, extensible, declarative process-planning and estimating knowledge representation language, which underpins the cape kernel architecture. Many manufacturing processes have been modeled to date, but eventually every significant process in motor veh...

Review of decision aids for nuclear-plant operators

International Nuclear Information System (INIS)

Kisner, R.A.

1983-01-01

Responses to various computer-based operational aids varied widely in detail, thus forcing distillation of the salient features of many operational aids from information sources other than the initial questionnaire. These sources included technical and management presentations, technical papers and reports, personal discussions, taped responses, sales brochures, system specifications and schematics, and other documents. The data base is dynamic, not static, owing to the nature of current trends in operational aid development. The information contained in it is subject to review and revision by the developing organizations. More systems are pending review and entry into the data base; hence the list is incomplete

A global, incremental development method for a web-based prostate cancer treatment decision aid and usability testing in a Dutch clinical setting.

Science.gov (United States)

Cuypers, Maarten; Lamers, Romy Ed; Kil, Paul Jm; The, Regina; Karssen, Klemens; van de Poll-Franse, Lonneke V; de Vries, Marieke

2017-07-01

Many new decision aids are developed while aspects of existing decision aids could also be useful, leading to a sub-optimal use of resources. To support treatment decision-making in prostate cancer patients, a pre-existing evidence-based Canadian decision aid was adjusted to Dutch clinical setting. After analyses of the original decision aid and routines in Dutch prostate cancer care, adjustments to the decision aid structure and content were made. Subsequent usability testing (N = 11) resulted in 212 comments. Care providers mainly provided feedback on medical content, and patients commented most on usability and summary layout. All participants reported that the decision aid was comprehensible and well-structured and would recommend decision aid use. After usability testing, final adjustments to the decision aid were made. The presented methods could be useful for cultural adaptation of pre-existing tools into other languages and settings, ensuring optimal usage of previous scientific and practical efforts and allowing for a global, incremental decision aid development process.

Prerequisites for Computer-Aided Cognitive Rehabilitation.

Science.gov (United States)

Legrand, Colette

1989-01-01

This paper describes computer-aided cognitive rehabilitation for mentally deficient persons. It lists motor, cognitive, emotional, and educational prerequisites to such rehabilitation and states advantages and disadvantages in using the prerequisites. (JDD)

Computer-aided instruction system

International Nuclear Information System (INIS)

Teneze, Jean Claude

1968-01-01

This research thesis addresses the use of teleprocessing and time sharing by the RAX IBM system and the possibility to introduce a dialog with the machine to develop an application in which the computer plays the role of a teacher for different pupils at the same time. Two operating modes are thus exploited: a teacher-mode and a pupil-mode. The developed CAI (computer-aided instruction) system comprises a checker to check the course syntax in teacher-mode, a translator to trans-code the course written in teacher-mode into a form which can be processes by the execution programme, and the execution programme which presents the course in pupil-mode

Comparison of safety measures with a multicriteria decision aiding technique

International Nuclear Information System (INIS)

Lombard, J.

1985-01-01

Attributes such as political, social and psychological factors have to be taken into account for the decision-making process. Multiattribute decision-aiding techniques are used to cope with this multidimensionality of the risk management process. A simple example will be given to illustrate how such method can be helpful for the selection of proper safety measures in a rational way. (orig./HP) [de

Microwave processing of a dental ceramic used in computer-aided design/computer-aided manufacturing.

Science.gov (United States)

Pendola, Martin; Saha, Subrata

2015-01-01

Because of their favorable mechanical properties and natural esthetics, ceramics are widely used in restorative dentistry. The conventional ceramic sintering process required for their use is usually slow, however, and the equipment has an elevated energy consumption. Sintering processes that use microwaves have several advantages compared to regular sintering: shorter processing times, lower energy consumption, and the capacity for volumetric heating. The objective of this study was to test the mechanical properties of a dental ceramic used in computer-aided design/computer-aided manufacturing (CAD/CAM) after the specimens were processed with microwave hybrid sintering. Density, hardness, and bending strength were measured. When ceramic specimens were sintered with microwaves, the processing times were reduced and protocols were simplified. Hardness was improved almost 20% compared to regular sintering, and flexural strength measurements suggested that specimens were approximately 50% stronger than specimens sintered in a conventional system. Microwave hybrid sintering may preserve or improve the mechanical properties of dental ceramics designed for CAD/CAM processing systems, reducing processing and waiting times.

The development of an online decision aid to support persons having a genetic predisposition to cancer and their partners during reproductive decision-making: a usability and pilot study.

Science.gov (United States)

Reumkens, Kelly; Tummers, Marly H E; Gietel-Habets, Joyce J G; van Kuijk, Sander M J; Aalfs, Cora M; van Asperen, Christi J; Ausems, Margreet G E M; Collée, Margriet; Dommering, Charlotte J; Kets, C Marleen; van der Kolk, Lizet E; Oosterwijk, Jan C; Tjan-Heijnen, Vivianne C G; van der Weijden, Trudy; de Die-Smulders, Christine E M; van Osch, Liesbeth A D M

2018-05-30

An online decision aid to support persons having a genetic predisposition to cancer and their partners during reproductive decision-making was developed. A two-phase usability test was conducted among 12 couples (N = 22; 2 persons participated without their partner) at risk for hereditary cancer and 15 health care providers. Couples and health care providers expressed similar suggestions for improvements, and evaluated the modified decision aid as acceptable, easy to use, and comprehensible. The final decision aid was pilot tested (N = 16) with paired sample t tests comparing main outcomes (decisional conflict, knowledge, realistic expectations regarding the reproductive options and decision self-efficacy) before (T0), immediately (T1) and 2 weeks after (T2) use of the decision aid. Pilot testing indicated decreased decisional conflict scores, increased knowledge, and improved realistic expectations regarding the reproductive options, at T1 and T2. No effect was found for couples' decision self-efficacy. The positive findings during usability testing were thus reflected in the pilot study. The decision aid will be further evaluated in a nationwide pretest-posttest study to facilitate implementation in the onco-genetic counselling setting. Ultimately, it is expected that the decision aid will enable end-users to make an informed decision.

Clinical use of patient decision-making aids for stone patients.

Science.gov (United States)

Lim, Amy H; Streeper, Necole M; Best, Sara L; Penniston, Kristina L; Nakada, Stephen Y

2017-08-01

Patient decision-making aids (PDMAs) help patients make informed healthcare decisions and improve patient satisfaction. The utility of PDMAs for patients considering treatments for urolithiasis has not yet been published. We report our experience using PDMAs developed at our institution in the outpatient clinical setting in patients considering a variety of treatment options for stones. Patients with radiographically confirmed urolithiasis were given PDMAs regarding treatment options for their stone(s) based on their clinical profile. We assessed patients' satisfaction, involvedness, and feeling of making a more informed decision with utilization of the PDMAs using a Likert Scale Questionnaire. Information was also collected regarding previous stone passage, history and type of surgical intervention for urolithiasis, and level of education. Patients (n = 43; 18 males, 23 females and two unknown) 53 +/- 14years old were included. Patients reported that they understood the advantages and disadvantages outlined in the PDMAs (97%), that the PDMAs helped them make a more informed decision (83%) and felt more involved in the decision making process (88%). Patients reported that the aids were presented in a balanced manner and used up-to-date scientific information (100%, 84% respectively). Finally, a majority of the patients prefer an expert's opinion when making a treatment decision (98%) with 73% of patients preferring to form their own opinion based on available information. Previous stone surgery was associated with patients feeling more involved with the decision making process (p = 0.0465). PDMAs have a promising role in shared decision-making in the setting of treatment options for nephrolithiasis.

Decision aids for familial breast cancer: exploring women's views using focus groups.

NARCIS (Netherlands)

Rapport, F.; Iredale, R.; Jones, W.; Sivell, S.; Edwards, A.; Gray, J.; Elwyn, G.

2006-01-01

BACKGROUND: There is increasing need for accessible information about familial breast cancer for those facing complex decisions around genetic testing, screening and treatment. Information currently includes leaflets and computerized decision aids, offering interactive interfaces to clarify complex

Protocol for the evaluation of a decision aid for women with a breech-presenting baby [ISRCTN14570598

Directory of Open Access Journals (Sweden)

Peat Brian

2004-12-01

Full Text Available Abstract Background There is now good evidence about the management options for pregnant women with a breech presentation (buttocks or feet rather than head-first at term; external cephalic version (ECV – the turning of a breech baby to a head-down position and/or planned caesarean section (CS. Each of these options has benefits and risks and the relative importance of these vary for each woman, subject to her personal values and preferences, a situation where a decision aid may be helpful. Decision aids are designed to assist patients and their doctors in making informed decisions using information that is unbiased and based on high quality research evidence. Decision aids are non-directive in the sense that they do not aim to steer the user towards any one option, but rather to support decision making which is informed and consistent with personal values. The ECV decision aid was developed using the Ottawa Decision Support Framework, including a systematic review of the evidence about the benefits and risks of the options for breech pregnancy. It comprises an audiotape with a supplementary booklet and worksheet, a format that can be taken home and discussed with a partner. This project aims to evaluate the ECV decision aid for women with a breech presenting baby in late pregnancy. Study design We aim to evaluate the effectiveness of the decision aid compared with usual care in a randomised controlled trial in maternity hospitals that offer ECV. The study group will receive the decision aid in addition to usual care and the control group will receive standard information on management options for breech presentation from their usual pregnancy care provider. Approximately 184 women with a single breech-presenting baby at greater than 34 weeks gestation and who are clinically eligible for ECV will be recruited for the trial. The primary outcomes of the study are knowledge, decisional conflict, anxiety and satisfaction with decision-making that

Protocol for the evaluation of a decision aid for women with a breech-presenting baby [ISRCTN14570598

Science.gov (United States)

Roberts, Christine L; Nassar, Natasha; Barratt, Alexandra; Raynes-Greenow, Camille H; Peat, Brian; Henderson-Smart, David

2004-01-01

Background There is now good evidence about the management options for pregnant women with a breech presentation (buttocks or feet rather than head-first) at term; external cephalic version (ECV) – the turning of a breech baby to a head-down position and/or planned caesarean section (CS). Each of these options has benefits and risks and the relative importance of these vary for each woman, subject to her personal values and preferences, a situation where a decision aid may be helpful. Decision aids are designed to assist patients and their doctors in making informed decisions using information that is unbiased and based on high quality research evidence. Decision aids are non-directive in the sense that they do not aim to steer the user towards any one option, but rather to support decision making which is informed and consistent with personal values. The ECV decision aid was developed using the Ottawa Decision Support Framework, including a systematic review of the evidence about the benefits and risks of the options for breech pregnancy. It comprises an audiotape with a supplementary booklet and worksheet, a format that can be taken home and discussed with a partner. This project aims to evaluate the ECV decision aid for women with a breech presenting baby in late pregnancy. Study design We aim to evaluate the effectiveness of the decision aid compared with usual care in a randomised controlled trial in maternity hospitals that offer ECV. The study group will receive the decision aid in addition to usual care and the control group will receive standard information on management options for breech presentation from their usual pregnancy care provider. Approximately 184 women with a single breech-presenting baby at greater than 34 weeks gestation and who are clinically eligible for ECV will be recruited for the trial. The primary outcomes of the study are knowledge, decisional conflict, anxiety and satisfaction with decision-making that will be assessed using

Value assessment aid to complex decision making. Final report

International Nuclear Information System (INIS)

Humphress, G.; Lewis, E.

1982-07-01

Value assessment (VA) is a new decision aid that can improve the performance of decisionmakers confronted with multiple attributes and conflicting objectives. Managers who are not supported by formal decision aids turn to various ''satisficing'' or effort-reducing biases that can lead to serious errors in the decisionmaking process. Value assessment, on the other hand, is an optimizing approach to problem-solving behavior. VA helps decisionmakers overcome the tendency to turn to effort-reducing biases by reducing the complexity of making tradeoffs and weighing all available information. Many of the issues which confront modern electric utility managements are complex, multiple attribute problems which must be viewed from engineering, financial and socio-political perspectives simultaneously. Added to this are the complications contributed by factors like uncertainty, risk, incomplete information and conflicting objectives among the public it serves. This is the complex decisionmaking arena which VA is intended to support

Decision aids: when 'nudging' patients to make a particular choice is more ethical than balanced, nondirective content.

Science.gov (United States)

Blumenthal-Barby, J S; Cantor, Scott B; Russell, Heidi Voelker; Naik, Aanand D; Volk, Robert J

2013-02-01

Patient decision aids, such as instructional leaflets describing treatment options for prostate cancer, are designed to help educate patients so that they can share in decisions about their care. Developers of these decision aids strive for balance, aiming to be as neutral, unbiased, and nondirective as possible. We argue that balance should not always be a goal, and we identify three situations where it should not be. For example, men diagnosed with early-stage prostate cancer frequently are not advised by their physicians that active surveillance is a reasonable alternative to immediate surgery or radiation. It may be desirable to design decision aids that promote active surveillance as an option. We recognize that the arguments put forth in this article are controversial. But they are also justified. We challenge medical decision makers and decision aid developers to determine if and when patients should be "nudged" toward one option or another.

Decisions at hand: a decision support system on handhelds.

Science.gov (United States)

Zupan, B; Porenta, A; Vidmar, G; Aoki, N; Bratko, I; Beck, J R

2001-01-01

One of the applications of clinical information systems is decision support. Although the advantages of utilizing such aids have never been theoretically disputed, they have been rarely used in practice. The factor that probably often limits the utility of clinical decision support systems is the need for computing power at the very site of decision making--at the place where the patient is interviewed, in discussion rooms, etc. The paper reports on a possible solution to this problem. A decision-support shell LogReg is presented, which runs on a handheld computer. A general schema for handheld-based decision support is also proposed, where decision models are developed on personal computers/workstations, encoded in XML and then transferred to handhelds, where the models are used within a decision support shell. A use case where LogReg has been applied to clinical outcome prediction in crush injury is presented.

User-centered design and the development of patient decision aids: protocol for a systematic review.

Science.gov (United States)

Witteman, Holly O; Dansokho, Selma Chipenda; Colquhoun, Heather; Coulter, Angela; Dugas, Michèle; Fagerlin, Angela; Giguere, Anik Mc; Glouberman, Sholom; Haslett, Lynne; Hoffman, Aubri; Ivers, Noah; Légaré, France; Légaré, Jean; Levin, Carrie; Lopez, Karli; Montori, Victor M; Provencher, Thierry; Renaud, Jean-Sébastien; Sparling, Kerri; Stacey, Dawn; Vaisson, Gratianne; Volk, Robert J; Witteman, William

2015-01-26

Providing patient-centered care requires that patients partner in their personal health-care decisions to the full extent desired. Patient decision aids facilitate processes of shared decision-making between patients and their clinicians by presenting relevant scientific information in balanced, understandable ways, helping clarify patients' goals, and guiding decision-making processes. Although international standards stipulate that patients and clinicians should be involved in decision aid development, little is known about how such involvement currently occurs, let alone best practices. This systematic review consisting of three interlinked subreviews seeks to describe current practices of user involvement in the development of patient decision aids, compare these to practices of user-centered design, and identify promising strategies. A research team that includes patient and clinician representatives, decision aid developers, and systematic review method experts will guide this review according to the Cochrane Handbook and PRISMA reporting guidelines. A medical librarian will hand search key references and use a peer-reviewed search strategy to search MEDLINE, EMBASE, PubMed, Web of Science, the Cochrane Library, the ACM library, IEEE Xplore, and Google Scholar. We will identify articles across all languages and years describing the development or evaluation of a patient decision aid, or the application of user-centered design or human-centered design to tools intended for patient use. Two independent reviewers will assess article eligibility and extract data into a matrix using a structured pilot-tested form based on a conceptual framework of user-centered design. We will synthesize evidence to describe how research teams have included users in their development process and compare these practices to user-centered design methods. If data permit, we will develop a measure of the user-centeredness of development processes and identify practices that are likely

Computer-aided modeling framework for efficient model development, analysis and identification

DEFF Research Database (Denmark)

Heitzig, Martina; Sin, Gürkan; Sales Cruz, Mauricio

2011-01-01

Model-based computer aided product-process engineering has attained increased importance in a number of industries, including pharmaceuticals, petrochemicals, fine chemicals, polymers, biotechnology, food, energy, and water. This trend is set to continue due to the substantial benefits computer-aided...... methods introduce. The key prerequisite of computer-aided product-process engineering is however the availability of models of different types, forms, and application modes. The development of the models required for the systems under investigation tends to be a challenging and time-consuming task....... The methodology has been implemented into a computer-aided modeling framework, which combines expert skills, tools, and database connections that are required for the different steps of the model development work-flow with the goal to increase the efficiency of the modeling process. The framework has two main...

Computer-aided power systems analysis

CERN Document Server

Kusic, George

2008-01-01

Computer applications yield more insight into system behavior than is possible by using hand calculations on system elements. Computer-Aided Power Systems Analysis: Second Edition is a state-of-the-art presentation of basic principles and software for power systems in steady-state operation. Originally published in 1985, this revised edition explores power systems from the point of view of the central control facility. It covers the elements of transmission networks, bus reference frame, network fault and contingency calculations, power flow on transmission networks, generator base power setti

Computer-aided modeling for efficient and innovative product-process engineering

DEFF Research Database (Denmark)

Heitzig, Martina

Model-based computer aided product-process engineering has attained increased importance in a number of industries, including pharmaceuticals, petrochemicals, fine chemicals, polymers, biotechnology, food, energy and water. This trend is set to continue due to the substantial benefits computer...... in chemical and biochemical engineering have been solved to illustrate the application of the generic modelling methodology, the computeraided modelling framework and the developed software tool.......-aided methods provide. The key prerequisite of computer-aided productprocess engineering is however the availability of models of different types, forms and application modes. The development of the models required for the systems under investigation tends to be a challenging, time-consuming and therefore cost...

Computer-Aided Corrosion Program Management

Science.gov (United States)

MacDowell, Louis

2010-01-01

This viewgraph presentation reviews Computer-Aided Corrosion Program Management at John F. Kennedy Space Center. The contents include: 1) Corrosion at the Kennedy Space Center (KSC); 2) Requirements and Objectives; 3) Program Description, Background and History; 4) Approach and Implementation; 5) Challenges; 6) Lessons Learned; 7) Successes and Benefits; and 8) Summary and Conclusions.

Computer-aided voice training in higher education: participants ...

African Journals Online (AJOL)

The training of performance singing in a multi lingual, multi cultural educational context presents unique problems and requires inventive teaching strategies. Computer-aided training offers objective visual feedback of the voice production that can be implemented as a teaching aid in higher education. This article reports on ...

Possible Computer Vision Systems and Automated or Computer-Aided Edging and Trimming

Science.gov (United States)

Philip A. Araman

1990-01-01

This paper discusses research which is underway to help our industry reduce costs, increase product volume and value recovery, and market more accurately graded and described products. The research is part of a team effort to help the hardwood sawmill industry automate with computer vision systems, and computer-aided or computer controlled processing. This paper...

Using Computer-Aided Software Engineering (CASE)--tools to document the current logical model of a system for DoD requirements specifications.

OpenAIRE

Ganzer, Donna A.

1987-01-01

Approved for public release; distribution is unlimited The Naval Postgraduate School's final exam scheduling system serves as a test case with which to compare two commercially available Computer-Aided Software Engineering (CASE) tools. The tools, Nastec Corporation's DesignAid (Release 3.55) and Index Technology's Excelerator (Release 1.7) are used to create Section 4.1 of two Abbreviated Systems Decision Papers to determine if their output can satisfy and should replace some of the Life...

Promoting the dissemination of decision aids: an odyssey in a dysfunctional health care financing system.

Science.gov (United States)

Billings, John

2004-01-01

The usefulness of patient decision aids (PtDAs) is well documented, yet they are not in widespread use. Barriers include assuring balance and fairness (auspices matter), the cost of producing and maintaining them, and getting them into the hands of patients at the right time. The Foundation for Informed Medical Decision Making and its for-profit partner, Health Dialog, have developed a creative business model that helps overcome these barriers and has greatly expanded the reach of decision aids.

Computational modelling of the impact of AIDS on business.

Science.gov (United States)

Matthews, Alan P

2007-07-01

An overview of computational modelling of the impact of AIDS on business in South Africa, with a detailed description of the AIDS Projection Model (APM) for companies, developed by the author, and suggestions for further work. Computational modelling of the impact of AIDS on business in South Africa requires modelling of the epidemic as a whole, and of its impact on a company. This paper gives an overview of epidemiological modelling, with an introduction to the Actuarial Society of South Africa (ASSA) model, the most widely used such model for South Africa. The APM produces projections of HIV prevalence, new infections, and AIDS mortality on a company, based on the anonymous HIV testing of company employees, and projections from the ASSA model. A smoothed statistical model of the prevalence test data is computed, and then the ASSA model projection for each category of employees is adjusted so that it matches the measured prevalence in the year of testing. FURTHER WORK: Further techniques that could be developed are microsimulation (representing individuals in the computer), scenario planning for testing strategies, and models for the business environment, such as models of entire sectors, and mapping of HIV prevalence in time and space, based on workplace and community data.

Use of a decision aid for prenatal testing of fetal abnormalities to improve women's informed decision making: a cluster randomised controlled trial [ISRCTN22532458].

Science.gov (United States)

Nagle, C; Gunn, J; Bell, R; Lewis, S; Meiser, B; Metcalfe, S; Ukoumunne, O C; Halliday, J

2008-02-01

To evaluate the effectiveness of a decision aid for prenatal testing of fetal abnormalities compared with a pamphlet in supporting women's decision making. A cluster randomised controlled trial. Primary health care. Women in early pregnancy consulting a GP. GPs were randomised to provide women with either a decision aid or a pamphlet. The decision aid was a 24-page booklet designed using the Ottowa Decision Framework. The pamphlet was an existing resource available in the trial setting. Validated scales were used to measure the primary outcomes, informed choice and decisional conflict, and the secondary outcomes, anxiety, depression, attitudes to the pregnancy/fetus and acceptability of the resource. Outcomes were measured at 14 weeks of gestation from questionnaires that women completed and returned by post. Women in the intervention group were more likely to make an informed decision 76% (126/165) than those in the control group 65% (107/165) (adjusted OR 2.08; 95% CI 1.14-3.81). A greater proportion of women in the intervention group 88% (147/167) had a 'good' level of knowledge than those in the control group 72% (123/171) (adjusted OR 3.43; 95% CI 1.79-6.58). Mean (SD) decisional conflict scores were low in both groups, decision aid 1.71 (0.49), pamphlet 1.65 (0.55) (adjusted mean difference 0.10; 95% CI -0.02 to 0.22). There was no strong evidence of differences between the trial arms in the measures of psychological or acceptability outcomes. A tailored prenatal testing decision aid plays an important role in improving women's knowledge of first and second trimester screening tests and assisting them to make decisions about screening and diagnostic tests that are consistent with their values.

Vascular tissue engineering by computer-aided laser micromachining.

Science.gov (United States)

Doraiswamy, Anand; Narayan, Roger J

2010-04-28

Many conventional technologies for fabricating tissue engineering scaffolds are not suitable for fabricating scaffolds with patient-specific attributes. For example, many conventional technologies for fabricating tissue engineering scaffolds do not provide control over overall scaffold geometry or over cell position within the scaffold. In this study, the use of computer-aided laser micromachining to create scaffolds for vascular tissue networks was investigated. Computer-aided laser micromachining was used to construct patterned surfaces in agarose or in silicon, which were used for differential adherence and growth of cells into vascular tissue networks. Concentric three-ring structures were fabricated on agarose hydrogel substrates, in which the inner ring contained human aortic endothelial cells, the middle ring contained HA587 human elastin and the outer ring contained human aortic vascular smooth muscle cells. Basement membrane matrix containing vascular endothelial growth factor and heparin was to promote proliferation of human aortic endothelial cells within the vascular tissue networks. Computer-aided laser micromachining provides a unique approach to fabricate small-diameter blood vessels for bypass surgery as well as other artificial tissues with complex geometries.

Balancing the presentation of information and options in patient decision aids: an updated review.

Science.gov (United States)

Abhyankar, Purva; Volk, Robert J; Blumenthal-Barby, Jennifer; Bravo, Paulina; Buchholz, Angela; Ozanne, Elissa; Vidal, Dale Colins; Col, Nananda; Stalmeier, Peep

2013-01-01

Standards for patient decision aids require that information and options be presented in a balanced manner; this requirement is based on the argument that balanced presentation is essential to foster informed decision making. If information is presented in an incomplete/non-neutral manner, it can stimulate cognitive biases that can unduly affect individuals' knowledge, perceptions of risks and benefits, and, ultimately, preferences. However, there is little clarity about what constitutes balance, and how it can be determined and enhanced. We conducted a literature review to examine the theoretical and empirical evidence related to balancing the presentation of information and options. A literature search related to patient decision aids and balance was conducted on Medline, using MeSH terms and PubMed; this search supplemented the 2011 Cochrane Collaboration's review of patient decision aids trials. Only English language articles relevant to patient decision making and addressing the balance of information and options were included. All members of the team independently screened clusters of articles; uncertainties were resolved by seeking review by another member. The team then worked in sub-groups to extract and synthesise data on theory, definitions, and evidence reported in these studies. A total of 40 articles met the inclusion criteria. Of these, six explained the rationale for balancing the presentation of information and options. Twelve defined "balance"; the definition of "balance" that emerged is as follows: "The complete and unbiased presentation of the relevant options and the information about those options-in content and in format-in a way that enables individuals to process this information without bias". Ten of the 40 articles reported assessing the balance of the relevant decision aid. All 10 did so exclusively from the users' or patients' perspective, using a five-point Likert-type scale. Presenting information in a side-by-side display form was

Computer aided safety analysis 1989

International Nuclear Information System (INIS)

1990-04-01

The meeting was conducted in a workshop style, to encourage involvement of all participants during the discussions. Forty-five (45) experts from 19 countries, plus 22 experts from the GDR participated in the meeting. A list of participants can be found at the end of this volume. Forty-two (42) papers were presented and discussed during the meeting. Additionally an open discussion was held on the possible directions of the IAEA programme on Computer Aided Safety Analysis. A summary of the conclusions of these discussions is presented in the publication. The remainder of this proceedings volume comprises the transcript of selected technical papers (22) presented in the meeting. It is the intention of the IAEA that the publication of these proceedings will extend the benefits of the discussions held during the meeting to a larger audience throughout the world. The Technical Committee/Workshop on Computer Aided Safety Analysis was organized by the IAEA in cooperation with the National Board for Safety and Radiological Protection (SAAS) of the German Democratic Republic in Berlin. The purpose of the meeting was to provide an opportunity for discussions on experiences in the use of computer codes used for safety analysis of nuclear power plants. In particular it was intended to provide a forum for exchange of information among experts using computer codes for safety analysis under the Technical Cooperation Programme on Safety of WWER Type Reactors (RER/9/004) and other experts throughout the world. A separate abstract was prepared for each of the 22 selected papers. Refs, figs tabs and pictures

[The automatic iris map overlap technology in computer-aided iridiagnosis].

Science.gov (United States)

He, Jia-feng; Ye, Hu-nian; Ye, Miao-yuan

2002-11-01

In the paper, iridology and computer-aided iridiagnosis technologies are briefly introduced and the extraction method of the collarette contour is then investigated. The iris map can be overlapped on the original iris image based on collarette contour extraction. The research on collarette contour extraction and iris map overlap is of great importance to computer-aided iridiagnosis technologies.

[Evaluation of the decision aid "Entscheidungshilfe Prostatakrebs" from the patients' view : Results from the first three months].

Science.gov (United States)

Groeben, C; Ihrig, A; Hölscher, T; Krones, T; Kessler, E; Kliesch, S; Wülfing, C; Koch, R; Wirth, M P; Huber, J

2016-12-01

The decision aid "Entscheidungshilfe Prostatakrebs" is available online free of charge since June 2016. It is designed to support patients with their treatment decision-making and to lighten the burden on their treating urologists. This study evaluates usage data from the first 3 months. The ICHOM standard set was applied to allow a personalised presentation and to collect relevant data for subsequent counselling. Additionally, personal preferences and psychological burden were assessed amongst others. We collected anonymous data. A multivariate model evaluated predictors for high user satisfaction. From June through August 2016 a total of 319 patients used the decision aid, showing a continuous monthly increase in the number of users. There were n = 219 (68.7%) complete questionnaires. Median age was 66.1 ± 8.0 years. The oncological risk was low in 30.3%, intermediate in 43.6% and high in 26.1%. A majority of 57.5% used the decision aid together with their partner, 35.1% alone and 5.5% with their children. In all, 54.8% were "very satisfied" and 32.0% were "satisfied" with the decision aid for a total satisfaction rate of about 87%. The only predictors of total satisfaction were the usage mode and reported distress level. As shown by the continuously increasing number of users this decision aid is becoming well established in German urology. Patients' overall ratings are very positive. The majority of patients use the decision aid with their partner. This represents a significant advantage of a multimedia approach compared to print media.

A supervisor system for computer aided laser machining

International Nuclear Information System (INIS)

Mukherjee, J.K.

1990-01-01

Lasers achieve non divergent beam of short wavelength energy which can propagate through normal atmosphere with little divergence and can be focused on very fine points. The final high energy per unit area on target is highly localised and suitable for various types of machining at high speeds. The most notable factor is that this high energy spot can be located precisely using light-weight optical components. The laser-machining is very amenable to environmental conditions unlike electron beam and other techniques. Precision cutting and welding of nuclear materials in normal or non oxidising atmosphere can be done using this fairly easily. To achieve these objectives, development of a computer controlled laser machining system has been undertaken. The development project aims at building a computer aided machine with indegenous controller and medium power laser suitable for cutting, welding, and marking. This paper describes the integration of the various computer aided functions, spanning over the full range, from job-defining to final finished part-delivary, in computer aided laser machining. Various innovative features of the system that render it suitable for laser tool development as well as for special machining applications with user-friendliness have been covered. (author). 5 refs., 5 figs

Computer based aids for operator support in nuclear power plants

International Nuclear Information System (INIS)

1990-04-01

In the framework of the Agency's programme on nuclear safety a survey was carried out based on a questionnaire to collect information on computer based aids for operator support in nuclear power plants in Member States. The intention was to put together a state-of-the-art report where different systems under development or already implemented would be described. This activity was also supported by an INSAG (International Nuclear Safety Advisory Group) recommendation. Two consultant's meetings were convened and their work is reflected in the two sections of the technical document. The first section, produced during the first meeting, is devoted to provide some general background material on the overall usability of Computerized Operator Decision Aids (CODAs), their advantages and shortcomings. During this first meeting, the first draft of the questionnaire was also produced. The second section presents the evaluation of the 40 questionnaires received from 11 Member States and comprises a short description of each system and some statistical and comparative observations. The ultimate goal of this activity was to inform Member States, particularly those who are considering implementation of a CODA, on the status of related developments elsewhere. 8 refs, 10 figs, 4 tabs

Computer-aided system design

Science.gov (United States)

Walker, Carrie K.

1991-01-01

A technique has been developed for combining features of a systems architecture design and assessment tool and a software development tool. This technique reduces simulation development time and expands simulation detail. The Architecture Design and Assessment System (ADAS), developed at the Research Triangle Institute, is a set of computer-assisted engineering tools for the design and analysis of computer systems. The ADAS system is based on directed graph concepts and supports the synthesis and analysis of software algorithms mapped to candidate hardware implementations. Greater simulation detail is provided by the ADAS functional simulator. With the functional simulator, programs written in either Ada or C can be used to provide a detailed description of graph nodes. A Computer-Aided Software Engineering tool developed at the Charles Stark Draper Laboratory (CSDL CASE) automatically generates Ada or C code from engineering block diagram specifications designed with an interactive graphical interface. A technique to use the tools together has been developed, which further automates the design process.

Evaluation of a decision aid for women with breech presentation at term: a randomised controlled trial [ISRCTN14570598

Science.gov (United States)

Nassar, N; Roberts, CL; Raynes-Greenow, CH; Barratt, A; Peat, B

2007-01-01

Objectives To evaluate the effectiveness of a decision aid for women with a breech presentation compared with usual care. Design Randomised controlled trial. Setting Tertiary obstetric hospitals offering external cephalic version (ECV). Population Women with a singleton pregnancy were diagnosed antenatally with a breech presentation at term, and were clinically eligible for ECV. Methods Women were randomised to either receive a decision aid about the management options for breech presentation in addition to usual care or to receive usual care only with standard counselling from their usual pregnancy care provider. The decision aid comprised a 24-page booklet supplemented by a 30-minute audio-CD and worksheet that was designed for women to take home and review with a partner. Main outcome measures Decisional conflict (uncertainty), knowledge, anxiety and satisfaction with decision making, and were assessed using self-administered questionnaires. Results Compared with usual care, women reviewing the decision aid experienced significantly lower decisional conflict (mean difference −8.92; 95% CI −13.18, −4.66) and increased knowledge (mean difference 8.40; 95% CI 3.10, 13.71), were more likely to feel that they had enough information to make a decision (RR 1.30; 95% CI 1.14, 1.47), had no increase in anxiety and reported greater satisfaction with decision making and overall experience of pregnancy and childbirth. In contrast, 19% of women in the usual care group reported they would have made a different decision about their care. Conclusions A decision aid is an effective and acceptable tool for pregnant women that provides an important adjunct to standard counselling for the management of breech presentation. Please cite this paper as: Nassar N, Roberts C, Raynes-Greenow C, Barratt A, Peat B, on behalf of the Decision Aid for Breech Presentation Trial Collaborators. Evaluation of a decision aid for women with breech presentation at term: a randomised controlled

The effect of patient narratives on information search in a web-based breast cancer decision aid: an eye-tracking study.

Science.gov (United States)

Shaffer, Victoria A; Owens, Justin; Zikmund-Fisher, Brian J

2013-12-17

Previous research has examined the impact of patient narratives on treatment choices, but to our knowledge, no study has examined the effect of narratives on information search. Further, no research has considered the relative impact of their format (text vs video) on health care decisions in a single study. Our goal was to examine the impact of video and text-based narratives on information search in a Web-based patient decision aid for early stage breast cancer. Fifty-six women were asked to imagine that they had been diagnosed with early stage breast cancer and needed to choose between two surgical treatments (lumpectomy with radiation or mastectomy). Participants were randomly assigned to view one of four versions of a Web decision aid. Two versions of the decision aid included videos of interviews with patients and physicians or videos of interviews with physicians only. To distinguish between the effect of narratives and the effect of videos, we created two text versions of the Web decision aid by replacing the patient and physician interviews with text transcripts of the videos. Participants could freely browse the Web decision aid until they developed a treatment preference. We recorded participants' eye movements using the Tobii 1750 eye-tracking system equipped with Tobii Studio software. A priori, we defined 24 areas of interest (AOIs) in the Web decision aid. These AOIs were either separate pages of the Web decision aid or sections within a single page covering different content. We used multilevel modeling to examine the effect of narrative presence, narrative format, and their interaction on information search. There was a significant main effect of condition, P=.02; participants viewing decision aids with patient narratives spent more time searching for information than participants viewing the decision aids without narratives. The main effect of format was not significant, P=.10. However, there was a significant condition by format interaction on

Application of computer-aided multi-scale modelling framework – Aerosol case study

DEFF Research Database (Denmark)

Heitzig, Martina; Sin, Gürkan; Glarborg, Peter

2011-01-01

Model-based computer aided product-process engineering has attained increased importance in a number of industries, including pharmaceuticals, petrochemicals, fine chemicals, polymers, biotechnology, food, energy and water. This trend is set to continue due to the substantial benefits computer-aided...... methods provide. The key prerequisite of computer-aided product-process engineering is however the availability of models of different types, forms and application modes. The development of the models required for the systems under investigation tends to be a challenging and time-consuming task involving...... numerous steps, expert skills and different modelling tools. This motivates the development of a computer-aided modelling framework that supports the user during model development, documentation, analysis, identification, application and re-use with the goal to increase the efficiency of the modelling...

Computer-aided Framework for Design of Pure, Mixed and Blended Products

DEFF Research Database (Denmark)

Cignitti, Stefano; Zhang, Lei; Gani, Rafiqul

2015-01-01

This paper presents a framework for computer-aided design of pure, mixed and blended chemical based products. The framework is a systematic approach to convert a Computer-aided Molecular, Mixture and Blend Design (CAMbD) formulation, based on needs and target properties, into a mixed integer non...

Computer aided architectural design : futures 2001

NARCIS (Netherlands)

Vries, de B.; Leeuwen, van J.P.; Achten, H.H.

2001-01-01

CAAD Futures is a bi-annual conference that aims to promote the advancement of computer-aided architectural design in the service of those concerned with the quality of the built environment. The conferences are organized under the auspices of the CAAD Futures Foundation, which has its secretariat

Basic studies on computer aided concurrent engineering for hull structure design and piping design; Kakugi ittai wo koryoshita doji heikotekina sekkei no shien ni kansuru kisoteki kenkyu

Energy Technology Data Exchange (ETDEWEB)

Aoyama, K.; Sawada, K. [The University of Tokyo, Tokyo (Japan)

1996-12-31

Considering integrated hull and piping design in shipbuilding industry as a good example for concurrent engineering (CE), discussions were given on a computer aided method to perform integrated hull and piping design smoothly. When CE aiding by means of a computer is considered, it is important to discuss a method for information management not only for `utilization of product models`, but also for `maintaining consistency between items of product information` and `concurrent utilization and production of product information` in concurrent designs. For the CE aided information management, utilization and production of the product information is effective if restrictive relationship between items of product information, and design functions are made clear. Definitions were given on the restrictive relationship between items of product information and `restrictive relationship information` that has `decision/provisional decision`, `date and time`, `designer` and `design functions`. Furthermore, `comprehensive relationship between items of product information` that can be produced from the restrictive relationship information was defined as a `restrictive network`. Utilizing the restrictive relationship between items of product information for CE aiding is effective. 9 refs., 14 figs.

Basic studies on computer aided concurrent engineering for hull structure design and piping design; Kakugi ittai wo koryoshita doji heikotekina sekkei no shien ni kansuru kisoteki kenkyu

Energy Technology Data Exchange (ETDEWEB)

Aoyama, K; Sawada, K [The University of Tokyo, Tokyo (Japan)

1997-12-31

Considering integrated hull and piping design in shipbuilding industry as a good example for concurrent engineering (CE), discussions were given on a computer aided method to perform integrated hull and piping design smoothly. When CE aiding by means of a computer is considered, it is important to discuss a method for information management not only for `utilization of product models`, but also for `maintaining consistency between items of product information` and `concurrent utilization and production of product information` in concurrent designs. For the CE aided information management, utilization and production of the product information is effective if restrictive relationship between items of product information, and design functions are made clear. Definitions were given on the restrictive relationship between items of product information and `restrictive relationship information` that has `decision/provisional decision`, `date and time`, `designer` and `design functions`. Furthermore, `comprehensive relationship between items of product information` that can be produced from the restrictive relationship information was defined as a `restrictive network`. Utilizing the restrictive relationship between items of product information for CE aiding is effective. 9 refs., 14 figs.

Students' perceptions of a multimedia computer-aided instruction ...

African Journals Online (AJOL)

Objective. To develop an interactive muttimedia-based computer-aided instruction (CAI) programme, to detennine its educational worth and efficacy in a multicuttural academic environment and to evaluate its usage by students with differing levels of computer literacy. Design. A prospective descriptive study evaluating ...

Decision aids for second-line palliative chemotherapy: a randomised phase II multicentre trial

NARCIS (Netherlands)

Oostendorp, L.J.M.; Ottevanger, P.B.; Donders, A.R.T.; Wouw, A.J. van de; Schoenaker, I.J.; Smilde, T.J.; Graaf, W.T.A. van der; Stalmeier, P.F.M.

2017-01-01

BACKGROUND: There is increasing recognition of the delicate balance between the modest benefits of palliative chemotherapy and the burden of treatment. Decision aids (DAs) can potentially help patients with advanced cancer with these difficult treatment decisions, but providing detailed information

Aid to Families with Dependent Children Quality Control Review Panel Decisions

Data.gov (United States)

U.S. Department of Health & Human Services — Decisions issued by the Aid to Families with Dependent Children (AFDC) Quality Control Review Panel of the Departmental Appeals Board concerning the AFDC program...

ICADx: interpretable computer aided diagnosis of breast masses

Science.gov (United States)

Kim, Seong Tae; Lee, Hakmin; Kim, Hak Gu; Ro, Yong Man

2018-02-01

In this study, a novel computer aided diagnosis (CADx) framework is devised to investigate interpretability for classifying breast masses. Recently, a deep learning technology has been successfully applied to medical image analysis including CADx. Existing deep learning based CADx approaches, however, have a limitation in explaining the diagnostic decision. In real clinical practice, clinical decisions could be made with reasonable explanation. So current deep learning approaches in CADx are limited in real world deployment. In this paper, we investigate interpretability in CADx with the proposed interpretable CADx (ICADx) framework. The proposed framework is devised with a generative adversarial network, which consists of interpretable diagnosis network and synthetic lesion generative network to learn the relationship between malignancy and a standardized description (BI-RADS). The lesion generative network and the interpretable diagnosis network compete in an adversarial learning so that the two networks are improved. The effectiveness of the proposed method was validated on public mammogram database. Experimental results showed that the proposed ICADx framework could provide the interpretability of mass as well as mass classification. It was mainly attributed to the fact that the proposed method was effectively trained to find the relationship between malignancy and interpretations via the adversarial learning. These results imply that the proposed ICADx framework could be a promising approach to develop the CADx system.

A global, incremental development method for a web-based prostate cancer treatment decision aid and usability testing in a Dutch clinical setting

NARCIS (Netherlands)

Cuypers, M.; Lamers, R.E.D.; Kil, P.J.M.; The, R.; Karssen, K.; van de Poll-Franse, L.V.; de Vries, M.

2018-01-01

Many new decision aids are developed while aspects of existing decision aids could also be useful, leading to a sub-optimal use of resources. To support treatment decision-making in prostate cancer patients, a pre-existing evidence-based Canadian decision aid was adjusted to Dutch clinical setting.

Decision aids for multiple-decision disease management as affected by weather input errors.

Science.gov (United States)

Pfender, W F; Gent, D H; Mahaffee, W F; Coop, L B; Fox, A D

2011-06-01

Many disease management decision support systems (DSSs) rely, exclusively or in part, on weather inputs to calculate an indicator for disease hazard. Error in the weather inputs, typically due to forecasting, interpolation, or estimation from off-site sources, may affect model calculations and management decision recommendations. The extent to which errors in weather inputs affect the quality of the final management outcome depends on a number of aspects of the disease management context, including whether management consists of a single dichotomous decision, or of a multi-decision process extending over the cropping season(s). Decision aids for multi-decision disease management typically are based on simple or complex algorithms of weather data which may be accumulated over several days or weeks. It is difficult to quantify accuracy of multi-decision DSSs due to temporally overlapping disease events, existence of more than one solution to optimizing the outcome, opportunities to take later recourse to modify earlier decisions, and the ongoing, complex decision process in which the DSS is only one component. One approach to assessing importance of weather input errors is to conduct an error analysis in which the DSS outcome from high-quality weather data is compared with that from weather data with various levels of bias and/or variance from the original data. We illustrate this analytical approach for two types of DSS, an infection risk index for hop powdery mildew and a simulation model for grass stem rust. Further exploration of analysis methods is needed to address problems associated with assessing uncertainty in multi-decision DSSs.

Intelligent decision aids for abnormal events in nuclear power plants

International Nuclear Information System (INIS)

Kafka, P.; Polke, H.

1988-01-01

German nuclear power plants are characterized by a high degree of automation, not only for normal operation but also for abnormal events. Therefore the role of the operating personnel is mainly a supervisory function. Nevertheless, for a spectrum of unexpected events the operating personnel have to react with manual recovery actions. In order to minimize human error in such recovery actions, different kinds of intelligent decision aid support the operators today. In this paper such aids are discussed and one of them is described in more detail. (author)

A risk-based decision-aiding tool for waste disposal

International Nuclear Information System (INIS)

Weiner, R.F.; Reiser, A.S.; Elcock, C.G.; Nevins, S.

1997-01-01

N-CART (the National Spent Nuclear Fuel Program Cost Analysis and Risk Tool) is being developed to aid in low-risk, cost-effective, timely management of radioactive waste and spent nuclear fuel, and can therefore be used in management of mixed waste. N-CART provides evaluation of multiple alternatives and presents the consequences of proposed waste management activities in a clear and concise format. N-CART's decision-aiding analyses include comparisons and sensitivity analyses of multiple alternatives and allows the user to perform quick turn-around open-quotes what ifclose quotes studies to investigate various scenarios. Uncertainties in data (such as cost and schedule of various activities) are represented as distributions. N-CART centralizes documentation of the bases of program alternatives and program decisions, thereby supporting responses to stakeholders concerns. The initial N-CART design considers regulatory requirements, costs, and schedules for alternative courses of action. The final design will include risks (public health, occupational, economic, scheduling), economic benefits, and the impacts of secondary waste generation. An optimization tool is being incorporated that allows the user to specify the relative importance of cost, time risks, and other bases for decisions. The N-CART prototype can be used to compare the costs and schedules of disposal alternatives for mixed low-level radioactive waste (MLLW) and greater-than-Class-C (GTCC) waste, as well as spent nuclear fuel (SNF) and related scrap material

Use of Video Decision Aids to Promote Advance Care Planning in Hilo, Hawai'i.

Science.gov (United States)

Volandes, Angelo E; Paasche-Orlow, Michael K; Davis, Aretha Delight; Eubanks, Robert; El-Jawahri, Areej; Seitz, Rae

2016-09-01

Advance care planning (ACP) seeks to promote care delivery that is concordant with patients' informed wishes. Scalability and cost may be barriers to widespread ACP, and video decision aids may help address such barriers. Our primary hypothesis was that ACP documentation would increase in Hilo after ACP video implementation. Secondary hypotheses included increased use of hospice, fewer deaths in the hospital, and decreased costs in the last month of life. The city of Hilo in Hawai'i (population 43,263), which is served by one 276-bed hospital (Hilo Medical Center), one hospice (the Hospice of Hilo), and 30 primary care physicians. The intervention consisted of a single, 1- to 4-h training and access to a suite of ACP video decision aids. Prior to implementation, the rate of ACP documentation for hospitalized patients with late-stage disease was 3.2 % (11/346). After the intervention, ACP documentation was 39.9 % (1,107/2,773) (P Hilo patients was $3,458 (95 % CI $3,051 to 3,865) lower per patient after the intervention when compared to the control region. Implementing ACP video decision aids was associated with improved ACP documentation, greater use of hospice, and decreased costs. Decision aids that promote ACP offer a scalable and cost-efficient medium to place patients at the center of their care.

DICOM standard in computer-aided medical technologies

International Nuclear Information System (INIS)

Plotnikov, A.V.; Prilutskij, D.A.; Selishchev, S.V.

1997-01-01

The paper outlines one of the promising standards to transmit images in medicine, in radiology in particular. the essence of the standard DICOM is disclosed and promises of its introduction into computer-aided medical technologies

Launching a virtual decision lab: development and field-testing of a web-based patient decision support research platform.

Science.gov (United States)

Hoffman, Aubri S; Llewellyn-Thomas, Hilary A; Tosteson, Anna N A; O'Connor, Annette M; Volk, Robert J; Tomek, Ivan M; Andrews, Steven B; Bartels, Stephen J

2014-12-12

Over 100 trials show that patient decision aids effectively improve patients' information comprehension and values-based decision making. However, gaps remain in our understanding of several fundamental and applied questions, particularly related to the design of interactive, personalized decision aids. This paper describes an interdisciplinary development process for, and early field testing of, a web-based patient decision support research platform, or virtual decision lab, to address these questions. An interdisciplinary stakeholder panel designed the web-based research platform with three components: a) an introduction to shared decision making, b) a web-based patient decision aid, and c) interactive data collection items. Iterative focus groups provided feedback on paper drafts and online prototypes. A field test assessed a) feasibility for using the research platform, in terms of recruitment, usage, and acceptability; and b) feasibility of using the web-based decision aid component, compared to performance of a videobooklet decision aid in clinical care. This interdisciplinary, theory-based, patient-centered design approach produced a prototype for field-testing in six months. Participants (n = 126) reported that: the decision aid component was easy to use (98%), information was clear (90%), the length was appropriate (100%), it was appropriately detailed (90%), and it held their interest (97%). They spent a mean of 36 minutes using the decision aid and 100% preferred using their home/library computer. Participants scored a mean of 75% correct on the Decision Quality, Knowledge Subscale, and 74 out of 100 on the Preparation for Decision Making Scale. Completing the web-based decision aid reduced mean Decisional Conflict scores from 31.1 to 19.5 (p development of a web-based patient decision support research platform that was feasible for use in research studies in terms of recruitment, acceptability, and usage. Within this platform, the web

Computer-Aided Drug Design in Epigenetics

Science.gov (United States)

Lu, Wenchao; Zhang, Rukang; Jiang, Hao; Zhang, Huimin; Luo, Cheng

2018-03-01

Epigenetic dysfunction has been widely implicated in several diseases especially cancers thus highlights the therapeutic potential for chemical interventions in this field. With rapid development of computational methodologies and high-performance computational resources, computer-aided drug design has emerged as a promising strategy to speed up epigenetic drug discovery. Herein, we make a brief overview of major computational methods reported in the literature including druggability prediction, virtual screening, homology modeling, scaffold hopping, pharmacophore modeling, molecular dynamics simulations, quantum chemistry calculation and 3D quantitative structure activity relationship that have been successfully applied in the design and discovery of epi-drugs and epi-probes. Finally, we discuss about major limitations of current virtual drug design strategies in epigenetics drug discovery and future directions in this field.

Computer-Aided Drug Design in Epigenetics

Science.gov (United States)

Lu, Wenchao; Zhang, Rukang; Jiang, Hao; Zhang, Huimin; Luo, Cheng

2018-01-01

Epigenetic dysfunction has been widely implicated in several diseases especially cancers thus highlights the therapeutic potential for chemical interventions in this field. With rapid development of computational methodologies and high-performance computational resources, computer-aided drug design has emerged as a promising strategy to speed up epigenetic drug discovery. Herein, we make a brief overview of major computational methods reported in the literature including druggability prediction, virtual screening, homology modeling, scaffold hopping, pharmacophore modeling, molecular dynamics simulations, quantum chemistry calculation, and 3D quantitative structure activity relationship that have been successfully applied in the design and discovery of epi-drugs and epi-probes. Finally, we discuss about major limitations of current virtual drug design strategies in epigenetics drug discovery and future directions in this field. PMID:29594101

Computer-Aided Modelling Methods and Tools

DEFF Research Database (Denmark)

Cameron, Ian; Gani, Rafiqul

2011-01-01

The development of models for a range of applications requires methods and tools. In many cases a reference model is required that allows the generation of application specific models that are fit for purpose. There are a range of computer aided modelling tools available that help to define the m...

Computer-aided translation tools

DEFF Research Database (Denmark)

Christensen, Tina Paulsen; Schjoldager, Anne

2016-01-01

in Denmark is rather high in general, but limited in the case of machine translation (MT) tools: While most TSPs use translation-memory (TM) software, often in combination with a terminology management system (TMS), only very few have implemented MT, which is criticised for its low quality output, especially......The paper reports on a questionnaire survey from 2013 of the uptake and use of computer-aided translation (CAT) tools by Danish translation service providers (TSPs) and discusses how these tools appear to have impacted on the Danish translation industry. According to our results, the uptake...

[Development of computer aided forming techniques in manufacturing scaffolds for bone tissue engineering].

Science.gov (United States)

Wei, Xuelei; Dong, Fuhui

2011-12-01

To review recent advance in the research and application of computer aided forming techniques for constructing bone tissue engineering scaffolds. The literature concerning computer aided forming techniques for constructing bone tissue engineering scaffolds in recent years was reviewed extensively and summarized. Several studies over last decade have focused on computer aided forming techniques for bone scaffold construction using various scaffold materials, which is based on computer aided design (CAD) and bone scaffold rapid prototyping (RP). CAD include medical CAD, STL, and reverse design. Reverse design can fully simulate normal bone tissue and could be very useful for the CAD. RP techniques include fused deposition modeling, three dimensional printing, selected laser sintering, three dimensional bioplotting, and low-temperature deposition manufacturing. These techniques provide a new way to construct bone tissue engineering scaffolds with complex internal structures. With rapid development of molding and forming techniques, computer aided forming techniques are expected to provide ideal bone tissue engineering scaffolds.

Decision support aids with anthropomorphic characteristics influence trust and performance in younger and older adults.

Science.gov (United States)

Pak, Richard; Fink, Nicole; Price, Margaux; Bass, Brock; Sturre, Lindsay

2012-01-01

This study examined the use of deliberately anthropomorphic automation on younger and older adults' trust, dependence and performance on a diabetes decision-making task. Research with anthropomorphic interface agents has shown mixed effects in judgments of preferences but has rarely examined effects on performance. Meanwhile, research in automation has shown some forms of anthropomorphism (e.g. etiquette) have effects on trust and dependence on automation. Participants answered diabetes questions with no-aid, a non-anthropomorphic aid or an anthropomorphised aid. Trust and dependence in the aid was measured. A minimally anthropomorphic aide primarily affected younger adults' trust in the aid. Dependence, however, for both age groups was influenced by the anthropomorphic aid. Automation that deliberately embodies person-like characteristics can influence trust and dependence on reasonably reliable automation. However, further research is necessary to better understand the specific aspects of the aid that affect different age groups. Automation that embodies human-like characteristics may be useful in situations where there is under-utilisation of reasonably reliable aids by enhancing trust and dependence in that aid. Practitioner Summary: The design of decision-support aids on consumer devices (e.g. smartphones) may influence the level of trust that users place in that system and their amount of use. This study is the first step in articulating how the design of aids may influence user's trust and use of such systems.

[Computer-aided Prognosis for Breast Cancer Based on Hematoxylin & Eosin Histopathology Image].

Science.gov (United States)

Chen, Jiamei; Qu, Aiping; Liu, Wenlou; Wang, Linwei; Yuan, Jingping; Liu, Juan; Li, Yan

2016-06-01

Quantitatively analyzing hematoxylin &eosin(H&E)histopathology images is an emerging field attracting increasing attentions in recent years.This paper reviews the application of computer-aided image analysis in breast cancer prognosis.The traditional prognosis based on H&E histopathology image for breast cancer is firstly sketched,followed by a detailed description of the workflow of computer-aided prognosis including image acquisition,image preprocessing,regions of interest detection and object segmentation,feature extraction,and computer-aided prognosis.In the end,major technical challenges and future directions in this field are summarized.

A novel classification method for aid decision of traditional Chinese patent medicines for stroke treatment.

Science.gov (United States)

Zhao, Yufeng; Liu, Bo; He, Liyun; Bai, Wenjing; Yu, Xueyun; Cao, Xinyu; Luo, Lin; Rong, Peijing; Zhao, Yuxue; Li, Guozheng; Liu, Baoyan

2017-09-01

Traditional Chinese patent medicines are widely used to treat stroke because it has good efficacy in the clinical environment. However, because of the lack of knowledge on traditional Chinese patent medicines, many Western physicians, who are accountable for the majority of clinical prescriptions for such medicine, are confused with the use of traditional Chinese patent medicines. Therefore, the aid-decision method is critical and necessary to help Western physicians rationally use traditional Chinese patent medicines. In this paper, Manifold Ranking is employed to develop the aid-decision model of traditional Chinese patent medicines for stroke treatment. First, 115 stroke patients from three hospitals are recruited in the cross-sectional survey. Simultaneously, traditional Chinese physicians determine the traditional Chinese patent medicines appropriate for each patient. Second, particular indicators are explored to characterize the population feature of traditional Chinese patent medicines for stroke treatment. Moreover, these particular indicators can be easily obtained byWestern physicians and are feasible for widespread clinical application in the future. Third, the aid-decision model of traditional Chinese patent medicines for stroke treatment is constructed based on Manifold Ranking. Experimental results reveal that traditional Chinese patent medicines can be differentiated. Moreover, the proposed model can obtain high accuracy of aid decision.

Computer-aided diagnosis of mammographic microcalcification clusters

International Nuclear Information System (INIS)

Kallergi, Maria

2004-01-01

Computer-aided diagnosis techniques in medical imaging are developed for the automated differentiation between benign and malignant lesions and go beyond computer-aided detection by providing cancer likelihood for a detected lesion given image and/or patient characteristics. The goal of this study was the development and evaluation of a computer-aided detection and diagnosis algorithm for mammographic calcification clusters. The emphasis was on the diagnostic component, although the algorithm included automated detection, segmentation, and classification steps based on wavelet filters and artificial neural networks. Classification features were selected primarily from descriptors of the morphology of the individual calcifications and the distribution of the cluster. Thirteen such descriptors were selected and, combined with patient's age, were given as inputs to the network. The features were ranked and evaluated for the classification of 100 high-resolution, digitized mammograms containing biopsy-proven, benign and malignant calcification clusters. The classification performance of the algorithm reached a 100% sensitivity for a specificity of 85% (receiver operating characteristic area index A z =0.98±0.01). Tests of the algorithm under various conditions showed that the selected features were robust morphological and distributional descriptors, relatively insensitive to segmentation and detection errors such as false positive signals. The algorithm could exceed the performance of a similar visual analysis system that was used as basis for development and, combined with a simple image standardization process, could be applied to images from different imaging systems and film digitizers with similar sensitivity and specificity rates

A computer-aided software-tool for sustainable process synthesis-intensification

DEFF Research Database (Denmark)

Kumar Tula, Anjan; Babi, Deenesh K.; Bottlaender, Jack

2017-01-01

and determine within the design space, the more sustainable processes. In this paper, an integrated computer-aided software-tool that searches the design space for hybrid/intensified more sustainable process options is presented. Embedded within the software architecture are process synthesis...... operations as well as reported hybrid/intensified unit operations is large and can be difficult to manually navigate in order to determine the best process flowsheet for the production of a desired chemical product. Therefore, it is beneficial to utilize computer-aided methods and tools to enumerate, analyze...... constraints while also matching the design targets, they are therefore more sustainable than the base case. The application of the software-tool to the production of biodiesel is presented, highlighting the main features of the computer-aided, multi-stage, multi-scale methods that are able to determine more...

Decision Support Systems: Applications in Statistics and Hypothesis Testing.

Science.gov (United States)

Olsen, Christopher R.; Bozeman, William C.

1988-01-01

Discussion of the selection of appropriate statistical procedures by educators highlights a study conducted to investigate the effectiveness of decision aids in facilitating the use of appropriate statistics. Experimental groups and a control group using a printed flow chart, a computer-based decision aid, and a standard text are described. (11…

Development of a decision aid for energy resource management for the Navajo Nation incorporating environmental cultural values

Science.gov (United States)

Necefer, Len Edward

Decision-making surrounding pathways of future energy resource management are complexity and requires balancing tradeoffs of multiple environmental, social, economic, and technical outcomes. Technical decision aid can provide a framework for informed decision making, allowing individuals to better understand the tradeoff between resources, technology, energy services, and prices. While technical decision aid have made significant advances in evaluating these quantitative aspects of energy planning and performance, they have not been designed to incorporate human factors, such as preferences and behavior that are informed by cultural values. Incorporating cultural values into decision tools can provide not only an improved decision framework for the Navajo Nation, but also generate new insights on how these perspective can improve decision making on energy resources. Ensuring these aids are a cultural fit for each context has the potential to increase trust and promote understanding of the tradeoffs involved in energy resource management. In this dissertation I present the development of a technical tool that explicitly addresses cultural and spiritual values and experimentally assesses their influence on the preferences and decision making of Navajo citizens. Chapter 2 describes the results of a public elicitation effort to gather information about stakeholder views and concerns related to energy development in the Navajo Nation in order to develop a larger sample survey and a decision-support tool that links techno-economic energy models with sociocultural attributes. Chapter 3 details the methods of developing the energy decision aid and its underlying assumptions for alternative energy projects and their impacts. This tool also provides an alternative to economic valuation of cultural impacts based upon an ordinal index tied to environmental impacts. Chapter 4 details the the influence of various cultural, environmental, and economic outcome information provided

Computer-aided dental prostheses construction using reverse engineering.

Science.gov (United States)

Solaberrieta, E; Minguez, R; Barrenetxea, L; Sierra, E; Etxaniz, O

2014-01-01

The implementation of computer-aided design/computer-aided manufacturing (CAD/CAM) systems with virtual articulators, which take into account the kinematics, constitutes a breakthrough in the construction of customised dental prostheses. This paper presents a multidisciplinary protocol involving CAM techniques to produce dental prostheses. This protocol includes a step-by-step procedure using innovative reverse engineering technologies to transform completely virtual design processes into customised prostheses. A special emphasis is placed on a novel method that permits a virtual location of the models. The complete workflow includes the optical scanning of the patient, the use of reverse engineering software and, if necessary, the use of rapid prototyping to produce CAD temporary prostheses.

Using linguistic descriptions with multi-criteria decision aid approaches in urban energy systems

OpenAIRE

Afsordegan, Arayeh; Sánchez Soler, Monica; Agell Jané, Núria; Gamboa Jimenez, Gonzalo; Cremades Oliver, Lázaro Vicente

2015-01-01

Multi-Criteria Decision Aid (MCDA) methods include various collections of mathematical techniques related to decision support systems in non-deterministic environments to support such applications as facility management, disaster management and urban planning. This paper applies MCDA approaches based on qualitative reasoning techniques with linguistic labels assessment. The aim of this method is ranking multi-attribute alternatives in group decision-making with qualitative labels. Finally ...

Measuring the Extent of European State Aid Control : An Econometric Analysis of the European Commission Decisions

NARCIS (Netherlands)

Brouwer, E.; Ozbugday, F.C.

2011-01-01

This paper provides an analysis of the European Commission (EC) decisions on state aid control using data on 550 state aid cases approved by the EC between 1998 and 2009. More specifically, we measure the determinants of the duration of state aid, total budget of state aid and daily budget of state

Measuring the Extent of European State Aid Control : An Econometric Analysis of the European Commission Decisions

NARCIS (Netherlands)

Brouwer, E.; Ozbugday, F.C.

2010-01-01

This paper provides an analysis of the European Commission (EC) decisions on state aid control using data on 550 state aid cases approved by the EC between 1998 and 2009. More specifically, we measure the determinants of the duration of state aid, total budget of state aid and daily budget of state

Decision aiding in public policy generation and implementation: a multicriteria approach to evaluate territorial resilience

Directory of Open Access Journals (Sweden)

Maria Franca Norese

2016-12-01

Full Text Available A decision aid process should be the result of an interaction between analysts, decision makers and stakeholders. Decision aiding is sometimes required when the problem situation is new and a formal decision system does not exist. Its role becomes that of facilitating the Intelligence phase of a decision process. In other situations, a criticism of certain policy making processes and their use of data, which may be available in institutional databases or are required as indicators for the decision process, motivates an intervention oriented towards structure knowledge and improvements of these processes. A preliminary study, which includes modelling and application of multi-criteria methods, can clarify a complex and new situation, propose a consistent approach for the later phases of a decision process or propose a different and more effective use of the data. A case study is proposed here to describe this methodological approach in relation to the disaster resilience of municipalities near the mbrone River, in Tuscany (Italy.

Estimation of the failure risk of a maxillary premolar with different crack depths with endodontic treatment by computer-aided design/computer-aided manufacturing ceramic restorations.

Science.gov (United States)

Lin, Chun-Li; Chang, Yen-Hsiang; Hsieh, Shih-Kai; Chang, Wen-Jen

2013-03-01

This study evaluated the risk of failure for an endodontically treated premolar with different crack depths, which was shearing toward the pulp chamber and was restored by using 3 different computer-aided design/computer-aided manufacturing ceramic restoration configurations. Three 3-dimensional finite element models designed with computer-aided design/computer-aided manufacturing ceramic onlay, endocrown, and conventional crown restorations were constructed to perform simulations. The Weibull function was incorporated with finite element analysis to calculate the long-term failure probability relative to different load conditions. The results indicated that the stress values on the enamel, dentin, and luting cement for endocrown restorations exhibited the lowest values relative to the other 2 restoration methods. Weibull analysis revealed that the overall failure probabilities in a shallow cracked premolar were 27%, 2%, and 1% for the onlay, endocrown, and conventional crown restorations, respectively, in the normal occlusal condition. The corresponding values were 70%, 10%, and 2% for the depth cracked premolar. This numeric investigation suggests that the endocrown provides sufficient fracture resistance only in a shallow cracked premolar with endodontic treatment. The conventional crown treatment can immobilize the premolar for different cracked depths with lower failure risk. Copyright © 2013 American Association of Endodontists. Published by Elsevier Inc. All rights reserved.

The computer-aided design of rubber-metal products

Directory of Open Access Journals (Sweden)

Pavlo S. Shvets

2015-12-01

Full Text Available The important problem in design of rubber-metal products is the optimization of their mass without sacrificing of proportionality factor is in the limits of standard. Aim: The aim of this work is to improve the computer-aided systems by development and implementation of improved optimization method in rubber-metal CAD systems for designers based on the reverse optimization. Materials and Methods: The paper studies the matters of computer-aided structural design of technical composite products composed of anisotropic materials that are essentially different in properties. Results: The structure of CAD systems for designers solving the problems of such design is offered and the work principles of its subsystems are described. It is shown that complicated systems optimization in CAD systems must consider as restrictions the entitative connection between separate elements of these systems within the area of the optimizing arguments. Conclusions: The problem of the “reverse” optimization when objective functions are the connectivity area parameters is considered. In many cases, this allows receiving solutions that are more effective during the computer-aided design process. The developed CAD system for designers was used during the production of rubber-metal shock absorbers at the Odessa Rubber Technical Articles Plant. The positive technical and economic effect was obtained.

Development of a patient decision aid for prevention of myocardial infarction in type 2 diabetes - rationale, design and pilot testing.

Science.gov (United States)

Lenz, Matthias; Kasper, Jürgen; Mühlhauser, Ingrid

2009-10-19

Development and testing of a decision aid about prevention of myocardial infarction for persons with type 2 diabetes. Development and testing were guided by the UK Medical Research Council's guidance for the development and evaluation of complex interventions. This comprised a systematic literature review, a focus group of 9 potential providers, modelling a prototype, interviews to qualitatively explore understanding and additional information needs, and revision of the decision aid. The decision aid includes evidence-based information, a tool for individual risk-assessment, worksheets, and an action plan. Five diabetes educators and 15 patients underwent two 60-minutes face-to-face interviews, firstly browsing the decision aid for the first time and then after using it. Both groups differed in their ratings. Overall, the decision aid was rated to present essential information in a complex but understandable and unbiased manner. Difficulties involved understanding of terminology and risk interpretation. "Social status as a risk factor" was the most challenged content by educators but considered as highly important by patients. The risk assessment tool was used inadequately. 5 patients allocated themselves into false risk categories. After revision of the tool, all 12 patients who were recruited for reassessment used the tool correctly. The decision aid was evaluated with diabetes educators and patients. Qualitative data analysis revealed aspects for revision. The decision aid is planned to be part of a shared decision making programme, comprising a strategy for patient counselling and educational modules addressed to providers. Quantitative evaluation is required to assess its effectiveness.

Protocol for the Osteoporosis Choice trial. A pilot randomized trial of a decision aid in primary care practice

Directory of Open Access Journals (Sweden)

Tulledge-Scheitel Sidna M

2009-12-01

Full Text Available Abstract Background Bisphosphonates can reduce fracture risk in patients with osteoporosis, but many at-risk patients do not start or adhere to these medications. The aims of this study are to: (1 preliminarily evaluate the effect of an individualized 10-year osteoporotic fracture risk calculator and decision aid (OSTEOPOROSIS CHOICE for postmenopausal women at risk for osteoporotic fractures; and (2 assess the feasibility and validity (i.e., absence of contamination of patient-level randomization (vs. cluster randomization in pilot trials of decision aid efficacy. Methods/Design This is a protocol for a parallel, 2-arm, randomized trial to compare an intervention group receiving OSTEOPOROSIS CHOICE to a control group receiving usual primary care. Postmenopausal women with bone mineral density T-scores of STEOPOROSIS CHOICE on five outcomes: (a patient knowledge regarding osteoporosis risk factors and treatment; (b quality of the decision-making process for both the patient and clinician; (c patient and clinician acceptability and satisfaction with the decision aid; (d rate of bisphosphonate use and adherence, and (e trial processes (e.g., ability to recruit participants, collect patient outcomes. To capture these outcomes, we will use patient and clinician surveys following each visit and video recordings of the clinical encounters. These video recordings will also allow us to determine the extent to which clinicians previously exposed to the decision aid were able to recreate elements of the decision aid with control patients (i.e., contamination. Pharmacy prescription profiles and follow-up phone interviews will assess medication start and adherence at 6 months. Discussion This pilot trial will provide evidence of feasibility, validity of patient randomization, and preliminary efficacy of a novel approach -- decision aids -- to improving medication adherence for postmenopausal women at risk of osteoporotic fractures. The results will inform

Computer-Aided Drug Design in Epigenetics

Directory of Open Access Journals (Sweden)

Wenchao Lu

2018-03-01

Full Text Available Epigenetic dysfunction has been widely implicated in several diseases especially cancers thus highlights the therapeutic potential for chemical interventions in this field. With rapid development of computational methodologies and high-performance computational resources, computer-aided drug design has emerged as a promising strategy to speed up epigenetic drug discovery. Herein, we make a brief overview of major computational methods reported in the literature including druggability prediction, virtual screening, homology modeling, scaffold hopping, pharmacophore modeling, molecular dynamics simulations, quantum chemistry calculation, and 3D quantitative structure activity relationship that have been successfully applied in the design and discovery of epi-drugs and epi-probes. Finally, we discuss about major limitations of current virtual drug design strategies in epigenetics drug discovery and future directions in this field.

Computer-Aided Engineering Education at the K.U. Leuven.

Science.gov (United States)

Snoeys, R.; Gobin, R.

1987-01-01

Describes some recent initiatives and developments in the computer-aided design program in the engineering faculty of the Katholieke Universiteit Leuven (Belgium). Provides a survey of the engineering curriculum, the computer facilities, and the main software packages available. (TW)

Regional Climate Change and Development of Public Health Decision Aids

Science.gov (United States)

Hegedus, A. M.; Darmenova, K.; Grant, F.; Kiley, H.; Higgins, G. J.; Apling, D.

2011-12-01

According to the World Heath Organization (WHO) climate change is a significant and emerging threat to public health, and changes the way we must look at protecting vulnerable populations. Worldwide, the occurrence of some diseases and other threats to human health depend predominantly on local climate patterns. Rising average temperatures, in combination with changing rainfall patterns and humidity levels, alter the lifecycle and regional distribution of certain disease-carrying vectors, such as mosquitoes, ticks and rodents. In addition, higher surface temperatures will bring heat waves and heat stress to urban regions worldwide and will likely increase heat-related health risks. A growing body of scientific evidence also suggests an increase in extreme weather events such as floods, droughts and hurricanes that can be destructive to human health and well-being. Therefore, climate adaptation and health decision aids are urgently needed by city planners and health officials to determine high risk areas, evaluate vulnerable populations and develop public health infrastructure and surveillance systems. To address current deficiencies in local planning and decision making with respect to regional climate change and its effect on human health, our research is focused on performing a dynamical downscaling with the Weather Research and Forecasting (WRF) model to develop decision aids that translate the regional climate data into actionable information for users. WRF model is initialized with the Max Planck Institute European Center/Hamburg Model version 5 (ECHAM5) General Circulation Model simulations forced with the Special Report on Emissions (SRES) A1B emissions scenario. Our methodology involves development of climatological indices of extreme weather, quantifying the risk of occurrence of water/rodent/vector-borne diseases as well as developing various heat stress related decision aids. Our results indicate that the downscale simulations provide the necessary

Development of a computer-aided digital reactivity computer system for PWRs

International Nuclear Information System (INIS)

Chung, S.-K.; Sung, K.-Y.; Kim, D.; Cho, D.-Y.

1993-01-01

Reactor physics tests at initial startup and after reloading are performed to verify nuclear design and to ensure safety operation. Two kinds of reactivity computers, analog and digital, have been widely used in the pressurized water reactor (PWR) core physics test. The test data of both reactivity computers are displayed only on the strip chart recorder, and these data are managed by hand so that the accuracy of the test results depends on operator expertise and experiences. This paper describes the development of the computer-aided digital reactivity computer system (DRCS), which is enhanced by system management software and an improved system for the application of the PWR core physics test

SOFTWARE FOR COMPUTER-AIDED DESIGN OF CROSS-WEDGE ROLLING

OpenAIRE

A. A. Abramov; S. V. Medvedev

2013-01-01

The issues of computer technology creation of 3D-design and engineering analysis of metal forming processes using cross wedge rolling methods (CWR) are considered. The developed software for computer-aided design and simulation of cross-wedge rolling is described.

Exploring the use of Option Grid™ patient decision aids in a sample of clinics in Poland.

Science.gov (United States)

Scalia, Peter; Elwyn, Glyn; Barr, Paul; Song, Julia; Zisman-Ilani, Yaara; Lesniak, Monika; Mullin, Sarah; Kurek, Krzysztof; Bushell, Matt; Durand, Marie-Anne

2018-05-29

Research on the implementation of patient decision aids to facilitate shared decision making in clinical settings has steadily increased across Western countries. A study which implements decision aids and measures their impact on shared decision making has yet to be conducted in the Eastern part of Europe. To study the use of Option Grid TM patient decision aids in a sample of Grupa LUX MED clinics in Warsaw, Poland, and measure their impact on shared decision making. We conducted a pre-post interventional study. Following a three-month period of usual care, clinicians from three Grupa LUX MED clinics received a one-hour training session on how to use three Option Grid TM decision aids and were provided with copies for use for four months. Throughout the study, all eligible patients were asked to complete the three-item CollaboRATE patient-reported measure of shared decision making after their clinical encounter. CollaboRATE enables patients to assess the efforts clinicians make to: (i) inform them about their health issues; (ii) listen to 'what matters most'; (iii) integrate their treatment preference in future plans. A Hierarchical Logistic Regression model was performed to understand which variables had an effect on CollaboRATE. 2,048 patients participated in the baseline phase; 1,889 patients participated in the intervention phase. Five of the thirteen study clinicians had a statistically significant increase in their CollaboRATE scores (pOption Grid TM helped some clinicians practice shared decision making as reflected in CollaboRATE scores, but most clinicians did not have a significant increase in their scores. Our study indicates that the effect of these interventions may be dependent on clinic contexts and clinician engagement. Copyright © 2018. Published by Elsevier GmbH.

Computer-Aided Methodology for Syndromic Strabismus Diagnosis.

Science.gov (United States)

Sousa de Almeida, João Dallyson; Silva, Aristófanes Corrêa; Teixeira, Jorge Antonio Meireles; Paiva, Anselmo Cardoso; Gattass, Marcelo

2015-08-01

Strabismus is a pathology that affects approximately 4 % of the population, causing aesthetic problems reversible at any age and irreversible sensory alterations that modify the vision mechanism. The Hirschberg test is one type of examination for detecting this pathology. Computer-aided detection/diagnosis is being used with relative success to aid health professionals. Nevertheless, the routine use of high-tech devices for aiding ophthalmological diagnosis and therapy is not a reality within the subspecialty of strabismus. Thus, this work presents a methodology to aid in diagnosis of syndromic strabismus through digital imaging. Two hundred images belonging to 40 patients previously diagnosed by an specialist were tested. The method was demonstrated to be 88 % accurate in esotropias identification (ET), 100 % for exotropias (XT), 80.33 % for hypertropias (HT), and 83.33 % for hypotropias (HoT). The overall average error was 5.6Δ and 3.83Δ for horizontal and vertical deviations, respectively, against the measures presented by the specialist.

Computer aided monitoring of breast abnormalities in X-ray mammograms

OpenAIRE

Selvan, Arul; Saatchi, Reza; Ferris, Christine

2011-01-01

X­ray mammography is regarded as the most effective tool for the detection and diagnosis of breast cancer, but the interpretation of mammograms is a difficult and \\ud error­prone task. Computer­aided detection (CADe) systems address the problem that radiologists often miss signs of cancers that are retrospectively visible in mammograms. Furthermore, computer­aided diagnosis (CADx) systems assist the radiologist in the classification of mammographic lesions as benign or malignant[1].\\ud This p...

Unit cell-based computer-aided manufacturing system for tissue engineering

International Nuclear Information System (INIS)

Kang, Hyun-Wook; Park, Jeong Hun; Kang, Tae-Yun; Seol, Young-Joon; Cho, Dong-Woo

2012-01-01

Scaffolds play an important role in the regeneration of artificial tissues or organs. A scaffold is a porous structure with a micro-scale inner architecture in the range of several to several hundreds of micrometers. Therefore, computer-aided construction of scaffolds should provide sophisticated functionality for porous structure design and a tool path generation strategy that can achieve micro-scale architecture. In this study, a new unit cell-based computer-aided manufacturing (CAM) system was developed for the automated design and fabrication of a porous structure with micro-scale inner architecture that can be applied to composite tissue regeneration. The CAM system was developed by first defining a data structure for the computing process of a unit cell representing a single pore structure. Next, an algorithm and software were developed and applied to construct porous structures with a single or multiple pore design using solid freeform fabrication technology and a 3D tooth/spine computer-aided design model. We showed that this system is quite feasible for the design and fabrication of a scaffold for tissue engineering. (paper)

Unit cell-based computer-aided manufacturing system for tissue engineering.

Science.gov (United States)

Kang, Hyun-Wook; Park, Jeong Hun; Kang, Tae-Yun; Seol, Young-Joon; Cho, Dong-Woo

2012-03-01

Scaffolds play an important role in the regeneration of artificial tissues or organs. A scaffold is a porous structure with a micro-scale inner architecture in the range of several to several hundreds of micrometers. Therefore, computer-aided construction of scaffolds should provide sophisticated functionality for porous structure design and a tool path generation strategy that can achieve micro-scale architecture. In this study, a new unit cell-based computer-aided manufacturing (CAM) system was developed for the automated design and fabrication of a porous structure with micro-scale inner architecture that can be applied to composite tissue regeneration. The CAM system was developed by first defining a data structure for the computing process of a unit cell representing a single pore structure. Next, an algorithm and software were developed and applied to construct porous structures with a single or multiple pore design using solid freeform fabrication technology and a 3D tooth/spine computer-aided design model. We showed that this system is quite feasible for the design and fabrication of a scaffold for tissue engineering.

Breast cancer anxiety's associations with responses to a chemoprevention decision aid.

Science.gov (United States)

Dillard, Amanda J; Scherer, Laura; Ubel, Peter A; Smith, Dylan M; Zikmund-Fisher, Brian J; McClure, Jennifer B; Greene, Sarah; Stark, Azadeh; Fagerlin, Angela

2013-01-01

Few studies have examined how specific emotions may affect decision-making processes. Anxiety may be especially relevant in health decisions such as those related to cancer in which thoughts of illness or death may be abundant. We examined associations between women's anxiety about developing breast cancer and variables related to their decision to take a medication that could reduce their chances of the disease. Six-hundred and thirty-two American women, who had an increased risk of breast cancer, reviewed a web-based decision aid about tamoxifen. We examined associations between their baseline, self-reported anxiety about developing the disease and post decision aid measures including knowledge about tamoxifen, attitude toward the medication, and behavioral intentions to look for more information and take the medication. Results showed that anxiety was not associated with knowledge about tamoxifen, but it was associated with attitude toward the medication such that women who were more anxious about developing breast cancer were more likely to think the benefits were worth the risks. Greater anxiety was also associated with greater behavioral intentions to look for additional information and take the medication in the next few months. Secondary analyses showed that behavioral intentions were related to knowledge of tamoxifen and attitude toward the medication only for women who were reporting low levels of anxiety. Overall, the findings suggest that anxiety about breast cancer may motivate interest in tamoxifen and not necessarily through affecting knowledge or attitudes. Copyright © 2012 Elsevier Ltd. All rights reserved.

Computer-Aided Design in Further Education.

Science.gov (United States)

Ingham, Peter, Ed.

This publication updates the 1982 occasional paper that was intended to foster staff awareness and assist colleges in Great Britain considering the use of computer-aided design (CAD) material in engineering courses. The paper begins by defining CAD and its place in the Integrated Business System with a brief discussion of the effect of CAD on the…

Recent advances in the reconstruction of cranio-maxillofacial defects using computer-aided design/computer-aided manufacturing.

Science.gov (United States)

Oh, Ji-Hyeon

2018-12-01

With the development of computer-aided design/computer-aided manufacturing (CAD/CAM) technology, it has been possible to reconstruct the cranio-maxillofacial defect with more accurate preoperative planning, precise patient-specific implants (PSIs), and shorter operation times. The manufacturing processes include subtractive manufacturing and additive manufacturing and should be selected in consideration of the material type, available technology, post-processing, accuracy, lead time, properties, and surface quality. Materials such as titanium, polyethylene, polyetheretherketone (PEEK), hydroxyapatite (HA), poly-DL-lactic acid (PDLLA), polylactide-co-glycolide acid (PLGA), and calcium phosphate are used. Design methods for the reconstruction of cranio-maxillofacial defects include the use of a pre-operative model printed with pre-operative data, printing a cutting guide or template after virtual surgery, a model after virtual surgery printed with reconstructed data using a mirror image, and manufacturing PSIs by directly obtaining PSI data after reconstruction using a mirror image. By selecting the appropriate design method, manufacturing process, and implant material according to the case, it is possible to obtain a more accurate surgical procedure, reduced operation time, the prevention of various complications that can occur using the traditional method, and predictive results compared to the traditional method.

Decision Accuracy in Computer-Mediated versus Face-to-Face Decision-Making Teams.

Science.gov (United States)

Hedlund; Ilgen; Hollenbeck

1998-10-01

Changes in the way organizations are structured and advances in communication technologies are two factors that have altered the conditions under which group decisions are made. Decisions are increasingly made by teams that have a hierarchical structure and whose members have different areas of expertise. In addition, many decisions are no longer made via strictly face-to-face interaction. The present study examines the effects of two modes of communication (face-to-face or computer-mediated) on the accuracy of teams' decisions. The teams are characterized by a hierarchical structure and their members differ in expertise consistent with the framework outlined in the Multilevel Theory of team decision making presented by Hollenbeck, Ilgen, Sego, Hedlund, Major, and Phillips (1995). Sixty-four four-person teams worked for 3 h on a computer simulation interacting either face-to-face (FtF) or over a computer network. The communication mode had mixed effects on team processes in that members of FtF teams were better informed and made recommendations that were more predictive of the correct team decision, but leaders of CM teams were better able to differentiate staff members on the quality of their decisions. Controlling for the negative impact of FtF communication on staff member differentiation increased the beneficial effect of the FtF mode on overall decision making accuracy. Copyright 1998 Academic Press.

Long-term health outcomes of a decision aid: data from a randomized trial of adjuvant! In women with localized breast cancer.

Science.gov (United States)

Vickers, Andrew J; Elkin, Elena B; Peele, Pamela B; Dickler, Maura; Siminoff, Laura A

2009-01-01

Women with localized breast cancer face difficult decisions about adjuvant therapy. Several decision aids are available to help women choose between treatment options. Decision aids are known to affect treatment choices and may therefore affect patient survival. The authors aimed to model the effects of the Adjuvant! decision aid on expected survival in women with early stage breast cancer. Data were obtained from a randomized trial of Adjuvant! (n = 395). To calculate the effects of the decision aid on survival, the authors used the Adjuvant! survival predictions as a surrogate endpoint. Data from each arm were entered separately into statistical models to estimate change in survival associated with receiving the Adjuvant! decision aid. Most women (approximately 85%) chose a treatment option that maximized predicted survival. The effects of the decision aid on outcome could not be modeled because a small number of women (n = 12, 3%) chose treatment options associated with a large (5%-14%) loss in survival. These women-most typically estrogen receptor positive but refusing hormonal therapy-were equally divided between Adjuvant! and control groups and were not distinguished by medical or demographic factors. Expected benefit from treatment is a key variable in understanding patient behavior. A small number of women refuse adjuvant treatment associated with large increases in predicted survival, even when they are explicitly informed about the degree of benefit they would forgo. Investigation of the effects of decision aids on cancer survival is unlikely to be fruitful due to power considerations.

[Computer-aided prescribing: from utopia to reality].

Science.gov (United States)

Suárez-Varela Ubeda, J; Beltrán Calvo, C; Molina López, T; Navarro Marín, P

2005-05-31

To determine whether the introduction of computer-aided prescribing helped reduce the administrative burden at primary care centers. Descriptive, cross-sectional design. Torreblanca Health Center in the province of Seville, southern Spain. From 29 October 2003 to the present a pilot project involving nine pharmacies in the basic health zone served by this health center has been running to evaluate computer-aided prescribing (the Receta XXI project) with real patients. All patients on the center's list of patients who came to the center for an administrative consultation to renew prescriptions for medications or supplies for long-term treatment. Total number of administrative visits per patient for patients who came to the center to renew prescriptions for long-term treatment, as recorded by the Diraya system (Historia Clinica Digital del Ciudadano, or Citizen's Digital Medical Record) during the period from February to July 2004. Total number of the same type of administrative visits recorded by the previous system (TASS) during the period from February to July 2003. The mean number of administrative visits per month during the period from February to July 2003 was 160, compared to a mean number of 64 visits during the period from February to July 2004. The reduction in the number of visits for prescription renewal was 60%. Introducing a system for computer-aided prescribing significantly reduced the number of administrative visits for prescription renewal for long-term treatment. This could help reduce the administrative burden considerably in primary care if the system were used in all centers.

Teaching Computer-Aided Design of Fluid Flow and Heat Transfer Engineering Equipment.

Science.gov (United States)

Gosman, A. D.; And Others

1979-01-01

Describes a teaching program for fluid mechanics and heat transfer which contains both computer aided learning (CAL) and computer aided design (CAD) components and argues that the understanding of the physical and numerical modeling taught in the CAL course is essential to the proper implementation of CAD. (Author/CMV)

Computer-Presented Organizational/Memory Aids as Instruction for Solving Pico-Fomi Problems.

Science.gov (United States)

Steinberg, Esther R.; And Others

1985-01-01

Describes investigation of effectiveness of computer-presented organizational/memory aids (matrix and verbal charts controlled by computer or learner) as instructional technique for solving Pico-Fomi problems, and the acquisition of deductive inference rules when such aids are present. Results indicate chart use control should be adapted to…

Which Cooperative Ownership Model Performs Better? A Financial-Decision Aid Approach

NARCIS (Netherlands)

Kalogeras, N.; Pennings, J.M.E.; Benos, T.; Doumpos, M.

2013-01-01

In this article the financial/ownership structures of agribusiness cooperatives are analyzed to examine whether new cooperative models perform better than the more traditional ones. The assessment procedure introduces a new financial decision-aid approach, which is based on data-analysis techniques

Assessing the quality of decision support technologies using the International Patient Decision Aid Standards instrument (IPDASi.

Directory of Open Access Journals (Sweden)

Glyn Elwyn

Full Text Available To describe the development, validation and inter-rater reliability of an instrument to measure the quality of patient decision support technologies (decision aids.Scale development study, involving construct, item and scale development, validation and reliability testing.There has been increasing use of decision support technologies--adjuncts to the discussions clinicians have with patients about difficult decisions. A global interest in developing these interventions exists among both for-profit and not-for-profit organisations. It is therefore essential to have internationally accepted standards to assess the quality of their development, process, content, potential bias and method of field testing and evaluation.Scale development study, involving construct, item and scale development, validation and reliability testing.Twenty-five researcher-members of the International Patient Decision Aid Standards Collaboration worked together to develop the instrument (IPDASi. In the fourth Stage (reliability study, eight raters assessed thirty randomly selected decision support technologies.IPDASi measures quality in 10 dimensions, using 47 items, and provides an overall quality score (scaled from 0 to 100 for each intervention. Overall IPDASi scores ranged from 33 to 82 across the decision support technologies sampled (n = 30, enabling discrimination. The inter-rater intraclass correlation for the overall quality score was 0.80. Correlations of dimension scores with the overall score were all positive (0.31 to 0.68. Cronbach's alpha values for the 8 raters ranged from 0.72 to 0.93. Cronbach's alphas based on the dimension means ranged from 0.50 to 0.81, indicating that the dimensions, although well correlated, measure different aspects of decision support technology quality. A short version (19 items was also developed that had very similar mean scores to IPDASi and high correlation between short score and overall score 0.87 (CI 0.79 to 0.92.This work

Brain computed tomography of patients with HIV/AIDS before the ...

African Journals Online (AJOL)

Background: The objective is to study intracranial complications of HIV/AIDS using brain‑computed tomography in patients who presented with neurological features before the advent of subsidized HIV/AIDS treatment program with highly active antiretroviral therapy (HAART) in Nigeria. Materials and Methods: Retrospective ...

Computer Graphics and Administrative Decision-Making.

Science.gov (United States)

Yost, Michael

1984-01-01

Reduction in prices now makes it possible for almost any institution to use computer graphics for administrative decision making and research. Current and potential uses of computer graphics in these two areas are discussed. (JN)

Artificial Intelligence at Advanced Information and Decision Systems

OpenAIRE

McCune, Brian P.

1981-01-01

Advanced Information and Decision Systems (AI-DS) is a relatively new, employee-owned company that does basic and applied research, product development, and consulting in the fields of artificial intelligence, computer science, decision analysis, operations research, control theory, estimation theory, and signal processing. AI&DS performs studies, analyses, systems design and evaluation, and software development for a variety of industrial clients and government agencies, including the Depart...

Studies and Analyses of Aided Adversarial Decision Making. Phase 2: Research on Human Trust in Automation

National Research Council Canada - National Science Library

Llinas, James

1998-01-01

.... Given that offensive IW operations may interfere with automated, data-fusion based decision aids, it is necessary to understand how personnel may rely on or trust these aids when appropriate (e.g...

Computer aided design of solonoid magnets

Energy Technology Data Exchange (ETDEWEB)

DeOlivares, J.M.

1978-06-01

Computer programs utilizing Legendre functions and elliptic integral functions have been written to aid in the design of solenoid magnets. The field inside an axisymmetric magnet can be expanded in a converging power series of Legendre functions. The Legendre function approach is very useful for designing solenoid magnets with a high degree of field uniformity. This approach has been programed on the LBL CDC 7600 computer so that one can design an axisymmetric magnet which meets any desired field structure. Two examples of computer designed solenoids are presented. A computer program utilizing elliptic integral functions was also written for the LBL CDC 7600 computer. This method was used in a computer program to verify the results obtained from the Legendre approach and for field calculations within the conductor. The elliptic integral field calculations within the conductor showed that thin solenoids produce field peaking at the ends of the magnet. Computer data is generated for various magnet geometries and compared with theoretical predictions. Computer results and theoretical prediction both show that field peaking is reduced for longer coils, increased for thinner coils and field peaking is a logarithmic function of length, thickness and radius.

Computer aids for plant operators

International Nuclear Information System (INIS)

Joly, J.P.

1992-01-01

For some time, particularly since the TMI accident, nuclear power plant operators have been aware of the difficulties involved in diagnosing accidents and returning plants to their stable, safe operating mode. There are various possible solutions to these problems: improve control organization during accident situations, rewrite control procedures, integrate safety engineers in shifts, improve control rooms, and implement additional computer aids. The purpose of this presentation is to describe the efforts undertaken by EDF over the last few years in this field

How do patients between the age of 65 and 75 use a web-based decision aid for treatment choice in localized prostate cancer?

Science.gov (United States)

Schrijvers, Jessie; Vanderhaegen, Joke; Van Poppel, Hendrik; Haustermans, Karin; Van Audenhove, Chantal

2013-08-01

This study was designed to evaluate the use of a web-based decision aid by a 65plus patient group in their decision-making process for treatment of localized prostate cancer. Of particular interest was the use of technology features such as patients' statements, comparative tables, and a values clarification tool. One hundred men from the University Hospital of Leuven campus, Gasthuisberg, were invited to use the web-based decision aid in their decision-making process. Twenty-six men were excluded based on non- or limited use of the decision aid. Of the remaining 74 men, user specifications, decision aid surfing characteristics by means of web-log data, and especially the use of technology features were analyzed. Men spent on average 30 minutes on the web-based decision aid. Most time was spent on the pages with information on treatment options. These pages were also most frequently accessed. The use of the feature 'comparative tables' was the highest, followed by the 'values clarification tool'. According to age (70 years) differences were observed for the time spent on the decision aid, the pages accessed, and the use of the technology features. Despite concerns about the usability of a web-based decision aid for elderly patients, these results indicated that the majority of 65plus persons with good internet skills use a web-based decision aid as well as its incorporated technology features. © 2013 Wiley Publishing Asia Pty Ltd and Chinese Cochrane Center, West China Hospital of Sichuan University.

Preparing Parents to Make An Informed Choice About Antibiotic Use for Common Acute Respiratory Infections in Children: A Randomised Trial of Brief Decision Aids in a Hypothetical Scenario.

Science.gov (United States)

Coxeter, Peter D; Del Mar, Chris B; Hoffmann, Tammy C

2017-08-01

Childhood acute respiratory infections (ARIs) are one of the most common reasons for primary care consultations and for receiving an antibiotic. Public awareness of antibiotic benefit and harms for these conditions is low. To facilitate informed decision making, ideally in collaboration with their doctor, parents need clear communication about benefits and harms. Decision aids may be able to facilitate this process. The aim of this study was to evaluate the effectiveness of three decision aids about antibiotic use for common ARIs in children. Adult parents of children aged 1-16 years (n = 120) were recruited from community settings and then randomised using a computer-generated randomisation sequence to receive a decision aid (n = 60) or fact sheet (n = 60). Allocation was concealed and used sealed and opaque sequentially numbered envelopes. Participants self-completed questionnaires at baseline and immediately post-intervention. The primary outcome was informed choice (conceptual and numerical knowledge; attitudes towards, and intention to use, antibiotics for a future ARI). Secondary outcomes were decisional conflict, decisional self-efficacy, and material acceptability. After reading the information, significantly more intervention group participants made an informed choice [57%] compared with control group participants [29%] [difference 28, 95% confidence interval (CI) 11-45%, p decision aids prepared parents to make an informed choice about antibiotic use more than fact sheets, in a hypothetical situation. Their effect within a consultation needs to be evaluated. Clinical Trials Registration Number: ACTRN12615000843550.

Software Engineering Techniques for Computer-Aided Learning.

Science.gov (United States)

Ibrahim, Bertrand

1989-01-01

Describes the process for developing tutorials for computer-aided learning (CAL) using a programing language rather than an authoring system. The workstation used is described, the use of graphics is discussed, the role of a local area network (LAN) is explained, and future plans are discussed. (five references) (LRW)

Psychosocial Factors of Health Professionals' Intention to Use a Decision Aid for Down Syndrome Screening: Cross-Sectional Quantitative Study.

Science.gov (United States)

Abbasgholizadeh Rahimi, Samira; Lépine, Johanie; Croteau, Jordie; Robitaille, Hubert; Giguere, Anik Mc; Wilson, Brenda J; Rousseau, François; Lévesque, Isabelle; Légaré, France

2018-04-25

Decisions about prenatal screening for Down syndrome are difficult for women, as they entail risk, potential loss, and regret. Shared decision making increases women's knowledge of their choices and better aligns decisions with their values. Patient decision aids foster shared decision making but are rarely used in this context. One of the most promising strategies for implementing shared decision making is distribution of decision aids by health professionals. We aimed to identify factors influencing their intention to use a DA during prenatal visit for decisions about Down syndrome screening. We conducted a cross-sectional quantitative study. Using a Web panel, we conducted a theory-based survey of health professionals in Quebec province (Canada). Eligibility criteria were as follows: (1) family physicians, midwives, obstetrician-gynecologists, or trainees in these professions; (2) involved in prenatal care; and (3) working in Quebec province. Participants watched a video depicting a health professional using a decision aid during a prenatal consultation with a woman and her partner, and then answered a questionnaire based on an extended version of the theory of planned behavior, including some of the constructs of the theoretical domains framework. The questionnaire assessed 8 psychosocial constructs (attitude, anticipated regret, subjective norm, self-identity, moral norm, descriptive norm, self-efficacy, and perceived control), 7 related sets of behavioral beliefs (advantages, disadvantages, emotions, sources of encouragement or discouragement, incentives, facilitators, and barriers), and sociodemographic data. We performed descriptive, bivariate, and multiple linear regression analyses to identify factors influencing health professionals' intention to use a decision aid. Among 330 health professionals who completed the survey, 310 met the inclusion criteria: family physicians, 55.2% (171/310); obstetrician-gynecologists, 33.8% (105/310); and midwives, 11

Development and Pilot Testing of a Decision Aid for Genomic Research Participants Notified of Clinically Actionable Research Findings for Cancer Risk.

Science.gov (United States)

Willis, Amanda M; Smith, Sian K; Meiser, Bettina; Ballinger, Mandy L; Thomas, David M; Tattersall, Martin; Young, Mary-Anne

2018-02-17

Germline genomic testing is increasingly used in research to identify genetic causes of disease, including cancer. However, there is evidence that individuals who are notified of clinically actionable research findings have difficulty making informed decisions regarding uptake of genetic counseling for these findings. This study aimed to produce and pilot test a decision aid to assist participants in genomic research studies who are notified of clinically actionable research findings to make informed choices regarding uptake of genetic counseling. Development was guided by published literature, the International Patient Decision Aid Standards, and the expertise of a steering committee of clinicians, researchers, and consumers. Decision aid acceptability was assessed by self-report questionnaire. All 19 participants stated that the decision aid was easy to read, clearly presented, increased their understanding of the implications of taking up research findings, and would be helpful in decision-making. While low to moderate levels of distress/worry were reported after reading the booklet, a majority of participants also reported feeling reassured. All participants would recommend the booklet to others considering uptake of clinically actionable research findings. Results indicate the decision aid is acceptable to the target audience, with potential as a useful decision support tool for genomic research participants.

Computer Navigation-aided Resection of Sacral Chordomas

Directory of Open Access Journals (Sweden)

Yong-Kun Yang

2016-01-01

Full Text Available Background: Resection of sacral chordomas is challenging. The anatomy is complex, and there are often no bony landmarks to guide the resection. Achieving adequate surgical margins is, therefore, difficult, and the recurrence rate is high. Use of computer navigation may allow optimal preoperative planning and improve precision in tumor resection. The purpose of this study was to evaluate the safety and feasibility of computer navigation-aided resection of sacral chordomas. Methods: Between 2007 and 2013, a total of 26 patients with sacral chordoma underwent computer navigation-aided surgery were included and followed for a minimum of 18 months. There were 21 primary cases and 5 recurrent cases, with a mean age of 55.8 years old (range: 35-84 years old. Tumors were located above the level of the S3 neural foramen in 23 patients and below the level of the S3 neural foramen in 3 patients. Three-dimensional images were reconstructed with a computed tomography-based navigation system combined with the magnetic resonance images using the navigation software. Tumors were resected via a posterior approach assisted by the computer navigation. Mean follow-up was 38.6 months (range: 18-84 months. Results: Mean operative time was 307 min. Mean intraoperative blood loss was 3065 ml. For computer navigation, the mean registration deviation during surgery was 1.7 mm. There were 18 wide resections, 4 marginal resections, and 4 intralesional resections. All patients were alive at the final follow-up, with 2 (7.7% exhibiting tumor recurrence. The other 24 patients were tumor-free. The mean Musculoskeletal Tumor Society Score was 27.3 (range: 19-30. Conclusions: Computer-assisted navigation can be safely applied to the resection of the sacral chordomas, allowing execution of preoperative plans, and achieving good oncological outcomes. Nevertheless, this needs to be accomplished by surgeons with adequate experience and skill.

Method of Computer-aided Instruction in Situation Control Systems

Directory of Open Access Journals (Sweden)

Anatoliy O. Kargin

2013-01-01

Full Text Available The article considers the problem of computer-aided instruction in context-chain motivated situation control system of the complex technical system behavior. The conceptual and formal models of situation control with practical instruction are considered. Acquisition of new behavior knowledge is presented as structural changes in system memory in the form of situational agent set. Model and method of computer-aided instruction represent formalization, based on the nondistinct theories by physiologists and cognitive psychologists.The formal instruction model describes situation and reaction formation and dependence on different parameters, effecting education, such as the reinforcement value, time between the stimulus, action and the reinforcement. The change of the contextual link between situational elements when using is formalized.The examples and results of computer instruction experiments of the robot device “LEGO MINDSTORMS NXT”, equipped with ultrasonic distance, touch, light sensors.

Computer Aided Design System for Developing Musical Fountain Programs

Institute of Scientific and Technical Information of China (English)

刘丹; 张乃尧; 朱汉城

2003-01-01

A computer aided design system for developing musical fountain programs was developed with multiple functions such as intelligent design, 3-D animation, manual modification and synchronized motion to make the development process more efficient. The system first analyzed the music form and sentiment using many basic features of the music to select a basic fountain program. Then, this program is simulated with 3-D animation and modified manually to achieve the desired results. Finally, the program is transformed to a computer control program to control the musical fountain in time with the music. A prototype system for the musical fountain was also developed. It was tested with many styles of music and users were quite satisfied with its performance. By integrating various functions, the proposed computer aided design system for developing musical fountain programs greatly simplified the design of the musical fountain programs.

A review of computer-aided oral and maxillofacial surgery: planning, simulation and navigation.

Science.gov (United States)

Chen, Xiaojun; Xu, Lu; Sun, Yi; Politis, Constantinus

2016-11-01

Currently, oral and maxillofacial surgery (OMFS) still poses a significant challenge for surgeons due to the anatomic complexity and limited field of view of the oral cavity. With the great development of computer technologies, he computer-aided surgery has been widely used for minimizing the risks and improving the precision of surgery. Areas covered: The major goal of this paper is to provide a comprehensive reference source of current and future development of computer-aided OMFS including surgical planning, simulation and navigation for relevant researchers. Expert commentary: Compared with the traditional OMFS, computer-aided OMFS overcomes the disadvantage that the treatment on the region of anatomically complex maxillofacial depends almost exclusively on the experience of the surgeon.

Review of Multi-Criteria Decision Aid for Integrated Sustainability Assessment of Urban Water Systems - MCEARD

Science.gov (United States)

Integrated sustainability assessment is part of a new paradigm for urban water decision making. Multi-criteria decision aid (MCDA) is an integrative framework used in urban water sustainability assessment, which has a particular focus on utilising stakeholder participation. Here ...

Perceptions of shared decision making and decision aids among rural primary care clinicians.

Science.gov (United States)

King, Valerie J; Davis, Melinda M; Gorman, Paul N; Rugge, J Bruin; Fagnan, L J

2012-01-01

Shared decision making (SDM) and decision aids (DAs) increase patients' involvement in health care decisions and enhance satisfaction with their choices. Studies of SDM and DAs have primarily occurred in academic centers and large health systems, but most primary care is delivered in smaller practices, and over 20% of Americans live in rural areas, where poverty, disease prevalence, and limited access to care may increase the need for SDM and DAs. To explore perceptions and practices of rural primary care clinicians regarding SDM and DAs. Cross-sectional survey. Setting and Participants Primary care clinicians affiliated with the Oregon Rural Practice-based Research Network. Surveys were returned by 181 of 231 eligible participants (78%); 174 could be analyzed. Two-thirds of participants were physicians, 84% practiced family medicine, and 55% were male. Sixty-five percent of respondents were unfamiliar with the term shared decision making, but following definition, 97% reported that they found the approach useful for conditions with multiple treatment options. Over 90% of clinicians perceived helping patients make decisions regarding chronic pain and health behavior change as moderate/hard in difficulty. Although 69% of respondents preferred that patients play an equal role in making decisions, they estimate that this happens only 35% of the time. Time was reported as the largest barrier to engaging in SDM (63%). Respondents were receptive to using DAs to facilitate SDM in print- (95%) or web-based formats (72%), and topic preference varied by clinician specialty and decision difficulty. Rural clinicians recognized the value of SDM and were receptive to using DAs in multiple formats. Integration of DAs to facilitate SDM in routine patient care may require addressing practice operation and reimbursement.

Computational intelligence in biomedical imaging

CERN Document Server

2014-01-01

This book provides a comprehensive overview of the state-of-the-art computational intelligence research and technologies in biomedical images with emphasis on biomedical decision making. Biomedical imaging offers useful information on patients’ medical conditions and clues to causes of their symptoms and diseases. Biomedical images, however, provide a large number of images which physicians must interpret. Therefore, computer aids are demanded and become indispensable in physicians’ decision making. This book discusses major technical advancements and research findings in the field of computational intelligence in biomedical imaging, for example, computational intelligence in computer-aided diagnosis for breast cancer, prostate cancer, and brain disease, in lung function analysis, and in radiation therapy. The book examines technologies and studies that have reached the practical level, and those technologies that are becoming available in clinical practices in hospitals rapidly such as computational inte...

Prosthetic rehabilitation with an implant-supported fixed prosthesis using computer-aided design and computer-aided manufacturing dental technology for a patient with a mandibulectomy: A clinical report.

Science.gov (United States)

Yoon, Hyung-In; Han, Jung-Suk

2016-02-01

The fabrication of dental prostheses with computer-aided design and computer-aided manufacturing shows acceptable marginal fits and favorable treatment outcomes. This clinical report describes the management of a patient who had undergone a mandibulectomy and received an implant-supported fixed prosthesis by using additive manufacturing for the framework and subtractive manufacturing for the monolithic zirconia restorations. Copyright © 2016 Editorial Council for the Journal of Prosthetic Dentistry. Published by Elsevier Inc. All rights reserved.

A decision aid for men with early stage prostate cancer: theoretical basis and a test by surrogate patients

Science.gov (United States)

Feldman‐Stewart, Deb; Brundage, Michael D.; Van Manen, Lori

2008-01-01

Background We developed a decision aid for patients with curable prostate cancer based on Svenson’s DiffCon Theory of Decision Making. This study was designed to determine if surrogate patients using the aid could understand the information presented, complete all tasks, show evidence of differentiation, and arrive at a preferred treatment choice. Methods Men, at least 50 years old and never diagnosed with prostate cancer, were recruited through local advertisements. Participants were asked to imagine that they were a case‐scenario patient. Then they completed the decision aid interview, which included three components: (i) information presentation, with comprehension questions, (ii) exercises to help identify attributes important to the decision, and (iii) value‐clarification exercises. Results Sixty‐nine men volunteered. They had a mean age of 61.2 (range 50–83) years, 37% had no formal education beyond high school, and 87% were living with a partner. All participants completed all aspects of the interview. They answered an average of 10 comprehension questions each, with a mean of 94.7% correct without a prompt. Each attribute in the information presented was identified by at least one participant as important to his decision. Participants identified a median of five attributes as important (ranges 1–14) at each of three points during the interview; 75% changed at least one important attribute during the interview. Forty‐nine per cent of participants also identified attributes as important that were not included in the presented information. Participants showed a wide range of values in each of seven trade‐off exercises. Eighty‐eight per cent of participants showed evidence of differentiation; 75% had a clear treatment preference by the end of the interview. Conclusions Our decision aid appears to meet its goals for surrogate patients and illustrates the strengths of the DiffCon theory. The ability of the aid to accommodate wide

Computer aided system engineering for space construction

Science.gov (United States)

Racheli, Ugo

1989-01-01

This viewgraph presentation covers the following topics. Construction activities envisioned for the assembly of large platforms in space (as well as interplanetary spacecraft and bases on extraterrestrial surfaces) require computational tools that exceed the capability of conventional construction management programs. The Center for Space Construction is investigating the requirements for new computational tools and, at the same time, suggesting the expansion of graduate and undergraduate curricula to include proficiency in Computer Aided Engineering (CAE) though design courses and individual or team projects in advanced space systems design. In the center's research, special emphasis is placed on problems of constructability and of the interruptability of planned activity sequences to be carried out by crews operating under hostile environmental conditions. The departure point for the planned work is the acquisition of the MCAE I-DEAS software, developed by the Structural Dynamics Research Corporation (SDRC), and its expansion to the level of capability denoted by the acronym IDEAS**2 currently used for configuration maintenance on Space Station Freedom. In addition to improving proficiency in the use of I-DEAS and IDEAS**2, it is contemplated that new software modules will be developed to expand the architecture of IDEAS**2. Such modules will deal with those analyses that require the integration of a space platform's configuration with a breakdown of planned construction activities and with a failure modes analysis to support computer aided system engineering (CASE) applied to space construction.

Single photon emission computed tomography in AIDS dementia complex

International Nuclear Information System (INIS)

Pohl, P.; Vogl, G.; Fill, H.; Roessler, H.Z.; Zangerle, R.; Gerstenbrand, F.

1988-01-01

Single photon emission computed tomography (SPECT) studies were performed in AIDS dementia complex using IMP in 12 patients (and HM-PAO in four of these same patients). In all patients, SPECT revealed either multiple or focal uptake defects, the latter corresponding with focal signs or symptoms in all but one case. Computerized tomography showed a diffuse cerebral atrophy in eight of 12 patients, magnetic resonance imaging exhibited changes like atrophy and/or leukoencephalopathy in two of five cases. Our data indicate that both disturbance of cerebral amine metabolism and alteration of local perfusion share in the pathogenesis of AIDS dementia complex. SPECT is an important aid in the diagnosis of AIDS dementia complex and contributes to the understanding of the pathophysiological mechanisms of this disorder

Speech-enabled Computer-aided Translation

DEFF Research Database (Denmark)

Mesa-Lao, Bartolomé

2014-01-01

The present study has surveyed post-editor trainees’ views and attitudes before and after the introduction of speech technology as a front end to a computer-aided translation workbench. The aim of the survey was (i) to identify attitudes and perceptions among post-editor trainees before performing...... a post-editing task using automatic speech recognition (ASR); and (ii) to assess the degree to which post-editors’ attitudes and expectations to the use of speech technology changed after actually using it. The survey was based on two questionnaires: the first one administered before the participants...

Computer Aided Detection of Breast Masses in Digital Tomosynthesis

National Research Council Canada - National Science Library

Singh, Swatee; Lo, Joseph

2008-01-01

The purpose of this study was to investigate feasibility of computer-aided detection of masses and calcification clusters in breast tomosynthesis images and obtain reliable estimates of sensitivity...

Modelling decision-making by pilots

Science.gov (United States)

Patrick, Nicholas J. M.

1993-01-01

Our scientific goal is to understand the process of human decision-making. Specifically, a model of human decision-making in piloting modern commercial aircraft which prescribes optimal behavior, and against which we can measure human sub-optimality is sought. This model should help us understand such diverse aspects of piloting as strategic decision-making, and the implicit decisions involved in attention allocation. Our engineering goal is to provide design specifications for (1) better computer-based decision-aids, and (2) better training programs for the human pilot (or human decision-maker, DM).

Computer-Aided Prototyping Systems (CAPS) within the software acquisition process: a case study

OpenAIRE

Ellis, Mary Kay

1993-01-01

Approved for public release; distribution is unlimited This thesis provides a case study which examines the benefits derived from the practice of computer-aided prototyping within the software acquisition process. An experimental prototyping systems currently in research is the Computer Aided Prototyping System (CAPS) managed under the Computer Science department of the Naval Postgraduate School, Monterey, California. This thesis determines the qualitative value which may be realized by ...

Development and evaluation of a patient decision aid for young people and parents considering fixed orthodontic appliances.

Science.gov (United States)

Marshman, Zoe; Eddaiki, Abdussalam; Bekker, Hilary L; Benson, Philip E

2016-12-01

To develop and evaluate a child-centred patient decision aid for young people, and their parents, supporting shared decision making about fixed orthodontic appliance treatment with dental health professionals, namely the Fixed Appliance Decision Aid (FADA). The studies were undertaken in a UK teaching dental hospital orthodontic department in 2013-2014. The development phase involved an interview study with: (a) 10 patients (12-16 years old), and their parents, receiving orthodontic care to investigate treatment decision making and inform the content of the FADA and (b) 23 stakeholders critiquing the draft decision aid's content, structure and utility. The evaluation phase employed a pre-/post-test study design, with 30 patients (12-16 years old) and 30 parents. Outcomes included the Decisional Conflict Scale; measures of orthodontic treatment expectations and knowledge. Qualitative analysis identified two informational needs: effectiveness of treatment on orthodontic outcomes and treatment consequences for patients' lives. Quantitative analysis found decisional conflict reduced in both patients (mean difference -12.3, SD 15.3, 95% CI 6.6-17.9; p orthodontic treatment increased; expectations about care were unchanged. Using the FADA may enable dental professionals to support patients and their parents, decisions about fixed appliance treatments more effectively, ensuring young people's preferences are integrated into care planning.

Custom-Made Computer-Aided-Design/Computer-Aided-Manufacturing Biphasic Calcium-Phosphate Scaffold for Augmentation of an Atrophic Mandibular Anterior Ridge

Directory of Open Access Journals (Sweden)

Francesco Guido Mangano

2015-01-01

Full Text Available This report documents the clinical, radiographic, and histologic outcome of a custom-made computer-aided-design/computer-aided-manufactured (CAD/CAM scaffold used for the alveolar ridge augmentation of a severely atrophic anterior mandible. Computed tomographic (CT images of an atrophic anterior mandible were acquired and modified into a 3-dimensional (3D reconstruction model; this was transferred to a CAD program, where a custom-made scaffold was designed. CAM software generated a set of tool-paths for the manufacture of the scaffold on a computer-numerical-control milling machine into the exact shape of the 3D design. A custom-made scaffold was milled from a synthetic micromacroporous biphasic calcium phosphate (BCP block. The scaffold closely matched the shape of the defect: this helped to reduce the time for the surgery and contributed to good healing. One year later, newly formed and well-integrated bone was clinically available, and two implants (AnyRidge, MegaGen, Gyeongbuk, South Korea were placed. The histologic samples retrieved from the implant sites revealed compact mature bone undergoing remodelling, marrow spaces, and newly formed trabecular bone surrounded by residual BCP particles. This study demonstrates that custom-made scaffolds can be fabricated by combining CT scans and CAD/CAM techniques. Further studies on a larger sample of patients are needed to confirm these results.

Development of the computer-aided process planning (CAPP system for polymer injection molds manufacturing

Directory of Open Access Journals (Sweden)

J. Tepić

2011-10-01

Full Text Available Beginning of production and selling of polymer products largely depends on mold manufacturing. The costs of mold manufacturing have significant share in the final price of a product. The best way to improve and rationalize polymer injection molds production process is by doing mold design automation and manufacturing process planning automation. This paper reviews development of a dedicated process planning system for manufacturing of the mold for injection molding, which integrates computer-aided design (CAD, computer-aided process planning (CAPP and computer-aided manufacturing (CAM technologies.

Weather Avoidance Using Route Optimization as a Decision Aid: An AWIN Topical Study. Phase 1

Science.gov (United States)

1998-01-01

The aviation community is faced with reducing the fatal aircraft accident rate by 80 percent within 10 years. This must be achieved even with ever increasing, traffic and a changing National Airspace System. This is not just an altruistic goal, but a real necessity, if our growing level of commerce is to continue. Honeywell Technology Center's topical study, "Weather Avoidance Using Route Optimization as a Decision Aid", addresses these pressing needs. The goal of this program is to use route optimization and user interface technologies to develop a prototype decision aid for dispatchers and pilots. This decision aid will suggest possible diversions through single or multiple weather hazards and present weather information with a human-centered design. At the conclusion of the program, we will have a laptop prototype decision aid that will be used to demonstrate concepts to industry for integration into commercialized products for dispatchers and/or pilots. With weather a factor in 30% of aircraft accidents, our program will prevent accidents by strategically avoiding weather hazards in flight. By supplying more relevant weather information in a human-centered format along with the tools to generate flight plans around weather, aircraft exposure to weather hazards can be reduced. Our program directly addresses the NASA's five year investment areas of Strategic Weather Information and Weather Operations (simulation/hazard characterization and crew/dispatch/ATChazard monitoring, display, and decision support) (NASA Aeronautics Safety Investment Strategy: Weather Investment Recommendations, April 15, 1997). This program is comprised of two phases, Phase I concluded December 31, 1998. This first phase defined weather data requirements, lateral routing algorithms, an conceptual displays for a user-centered design. Phase II runs from January 1999 through September 1999. The second phase integrates vertical routing into the lateral optimizer and combines the user

Computer-aided engineering for Qinshan CANDU projects

International Nuclear Information System (INIS)

Huang Zhizhang; Goland, D.

1999-01-01

The author briefly describes AECL's work in applying computer-aided engineering tools to the Qinshan CANDU Project. The main emphases will be to introduce the major CADD software tools and their use in civil design, process design and EI and C design. Other special software tools and non-CADD tools and their applications are also briefly introduced

Ecological rationality: a framework for understanding and aiding the aging decision maker.

Science.gov (United States)

Mata, Rui; Pachur, Thorsten; von Helversen, Bettina; Hertwig, Ralph; Rieskamp, Jörg; Schooler, Lael

2012-01-01

The notion of ecological rationality sees human rationality as the result of the adaptive fit between the human mind and the environment. Ecological rationality focuses the study of decision making on two key questions: First, what are the environmental regularities to which people's decision strategies are matched, and how frequently do these regularities occur in natural environments? Second, how well can people adapt their use of specific strategies to particular environmental regularities? Research on aging suggests a number of changes in cognitive function, for instance, deficits in learning and memory that may impact decision-making skills. However, it has been shown that simple strategies can work well in many natural environments, which suggests that age-related deficits in strategy use may not necessarily translate into reduced decision quality. Consequently, we argue that predictions about the impact of aging on decision performance depend not only on how aging affects decision-relevant capacities but also on the decision environment in which decisions are made. In sum, we propose that the concept of the ecological rationality is crucial to understanding and aiding the aging decision maker.

A review of computer-aided design/computer-aided manufacture techniques for removable denture fabrication

Science.gov (United States)

Bilgin, Mehmet Selim; Baytaroğlu, Ebru Nur; Erdem, Ali; Dilber, Erhan

2016-01-01

The aim of this review was to investigate usage of computer-aided design/computer-aided manufacture (CAD/CAM) such as milling and rapid prototyping (RP) technologies for removable denture fabrication. An electronic search was conducted in the PubMed/MEDLINE, ScienceDirect, Google Scholar, and Web of Science databases. Databases were searched from 1987 to 2014. The search was performed using a variety of keywords including CAD/CAM, complete/partial dentures, RP, rapid manufacturing, digitally designed, milled, computerized, and machined. The identified developments (in chronological order), techniques, advantages, and disadvantages of CAD/CAM and RP for removable denture fabrication are summarized. Using a variety of keywords and aiming to find the topic, 78 publications were initially searched. For the main topic, the abstract of these 78 articles were scanned, and 52 publications were selected for reading in detail. Full-text of these articles was gained and searched in detail. Totally, 40 articles that discussed the techniques, advantages, and disadvantages of CAD/CAM and RP for removable denture fabrication and the articles were incorporated in this review. Totally, 16 of the papers summarized in the table. Following review of all relevant publications, it can be concluded that current innovations and technological developments of CAD/CAM and RP allow the digitally planning and manufacturing of removable dentures from start to finish. As a result according to the literature review CAD/CAM techniques and supportive maxillomandibular relationship transfer devices are growing fast. In the close future, fabricating removable dentures will become medical informatics instead of needing a technical staff and procedures. However the methods have several limitations for now. PMID:27095912

Computer aided molecular design with combined molecular modeling and group contribution

DEFF Research Database (Denmark)

Harper, Peter Mathias; Gani, Rafiqul; Kolar, Petr

1999-01-01

Computer-aided molecular design (CAMD) provides a means for determining molecules or mixtures of molecules (CAMMD) having a desirable set of physicochemical properties. The application range of CAMD is restricted due to limitations on the complexity of the generated molecular structures and on th......Computer-aided molecular design (CAMD) provides a means for determining molecules or mixtures of molecules (CAMMD) having a desirable set of physicochemical properties. The application range of CAMD is restricted due to limitations on the complexity of the generated molecular structures...

Computer-Aided Multiscale Modelling for Chemical Process Engineering

DEFF Research Database (Denmark)

Morales Rodriguez, Ricardo; Gani, Rafiqul

2007-01-01

Chemical processes are generally modeled through monoscale approaches, which, while not adequate, satisfy a useful role in product-process design. In this case, use of a multi-dimensional and multi-scale model-based approach has importance in product-process development. A computer-aided framework...

Micrometric precision of prosthetic dental crowns obtained by optical scanning and computer-aided designing/computer-aided manufacturing system

Science.gov (United States)

das Neves, Flávio Domingues; de Almeida Prado Naves Carneiro, Thiago; do Prado, Célio Jesus; Prudente, Marcel Santana; Zancopé, Karla; Davi, Letícia Resende; Mendonça, Gustavo; Soares, Carlos José

2014-08-01

The current study evaluated prosthetic dental crowns obtained by optical scanning and a computer-aided designing/computer-aided manufacturing system using micro-computed tomography to compare the marginal fit. The virtual models were obtained with four different scanning surfaces: typodont (T), regular impressions (RI), master casts (MC), and powdered master casts (PMC). Five virtual models were obtained for each group. For each model, a crown was designed on the software and milled from feldspathic ceramic blocks. Micro-CT images were obtained for marginal gap measurements and the data were statistically analyzed by one-way analysis of variance followed by Tukey's test. The mean vertical misfit was T=62.6±65.2 μm; MC=60.4±38.4 μm; PMC=58.1±38.0 μm, and RI=89.8±62.8 μm. Considering a percentage of vertical marginal gap of up to 75 μm, the results were T=71.5%, RI=49.2%, MC=69.6%, and PMC=71.2%. The percentages of horizontal overextension were T=8.5%, RI=0%, MC=0.8%, and PMC=3.8%. Based on the results, virtual model acquisition by scanning the typodont (simulated mouth) or MC, with or without powder, showed acceptable values for the marginal gap. The higher result of marginal gap of the RI group suggests that it is preferable to scan this directly from the mouth or from MC.

The potential impact of computer-aided assessment technology in ...

African Journals Online (AJOL)

The potential impact of computer-aided assessment technology in higher education. ... Further more 'Increased number of students in Higher Education and the ... benefits, limitations, impacts on student learning and strategies for developing ...

Computer-aided control system design

International Nuclear Information System (INIS)

Lebenhaft, J.R.

1986-01-01

Control systems are typically implemented using conventional PID controllers, which are then tuned manually during plant commissioning to compensate for interactions between feedback loops. As plants increase in size and complexity, such controllers can fail to provide adequate process regulations. Multivariable methods can be utilized to overcome these limitations. At the Chalk River Nuclear Laboratories, modern control systems are designed and analyzed with the aid of MVPACK, a system of computer programs that appears to the user like a high-level calculator. The software package solves complicated control problems, and provides useful insight into the dynamic response and stability of multivariable systems

Computer-aided dispatching system design specification

Energy Technology Data Exchange (ETDEWEB)

Briggs, M.G.

1997-12-16

This document defines the performance requirements for a graphic display dispatching system to support Hanford Patrol Operations Center. This document reflects the as-built requirements for the system that was delivered by GTE Northwest, Inc. This system provided a commercial off-the-shelf computer-aided dispatching system and alarm monitoring system currently in operations at the Hanford Patrol Operations Center, Building 2721E. This system also provides alarm back-up capability for the Plutonium Finishing Plant (PFP).

Computer-aided dispatching system design specification

International Nuclear Information System (INIS)

Briggs, M.G.

1997-01-01

This document defines the performance requirements for a graphic display dispatching system to support Hanford Patrol Operations Center. This document reflects the as-built requirements for the system that was delivered by GTE Northwest, Inc. This system provided a commercial off-the-shelf computer-aided dispatching system and alarm monitoring system currently in operations at the Hanford Patrol Operations Center, Building 2721E. This system also provides alarm back-up capability for the Plutonium Finishing Plant (PFP)

Computer-Aided Communication Satellite System Analysis and Optimization.

Science.gov (United States)

Stagl, Thomas W.; And Others

Various published computer programs for fixed/broadcast communication satellite system synthesis and optimization are discussed. The rationale for selecting General Dynamics/Convair's Satellite Telecommunication Analysis and Modeling Program (STAMP) in modified form to aid in the system costing and sensitivity analysis work in the Program on…

Computer models for economic and silvicultural decisions

Science.gov (United States)

Rosalie J. Ingram

1989-01-01

Computer systems can help simplify decisionmaking to manage forest ecosystems. We now have computer models to help make forest management decisions by predicting changes associated with a particular management action. Models also help you evaluate alternatives. To be effective, the computer models must be reliable and appropriate for your situation.

A Computer-Aided FPS-Oriented Approach for Construction Briefing

Institute of Scientific and Technical Information of China (English)

Xiaochun Luo; Qiping Shen

2008-01-01

Function performance specification (FPS) is one of the value management (VM) techniques de- veloped for the explicit statement of optimum product definition. This technique is widely used in software engineering and manufacturing industry, and proved to be successful to perform product defining tasks. This paper describes an FPS-odented approach for construction briefing, which is critical to the successful deliv- ery of construction projects. Three techniques, i.e., function analysis system technique, shared space, and computer-aided toolkit, are incorporated into the proposed approach. A computer-aided toolkit is developed to facilitate the implementation of FPS in the briefing processes. This approach can facilitate systematic, ef- ficient identification, clarification, and representation of client requirements in trail running. The limitations of the approach and future research work are also discussed at the end of the paper.

Development and testing of a decision aid for women considering delayed breast reconstruction.

Science.gov (United States)

Metcalfe, Kelly; Zhong, Toni; O'Neill, Anne C; McCready, David; Chan, Linda; Butler, Kate; Brennenstuhl, Sarah; Hofer, Stefan O P

2018-03-01

The decision to have post-mastectomy breast reconstruction (PMBR) is highly complex and many women feel ill equipped to make this decision. Decision aids have been advocated to promote patient involvement in decision-making by streamlining and standardizing communication between the patient and the health care professional. In this study, we report on the development and testing of a decision aid (DA) for breast cancer survivors considering delayed PMBR. The DA was developed and evaluated in three phases. The first phase included the development of the DA with input and review by practitioners and key stakeholders. The second phase involved pilot testing of the feasibility and acceptability of the DA with a convenience sample of women with delayed PMBR. The third phase involved a pretest/post-test evaluation of the DA for women who were making decisions about their PMBR options. The DA was developed using the Ottawa Decision Support Framework. In the second phase of the study, 21 women completed the acceptability survey, of whom 100% reported that they would recommend the DA to other women. In the third phase, decisional conflict decreased significantly (p < 0.001) and knowledge increased significantly (p < 0.001) from prior to using the DA to 1-2 weeks after using the DA. The DA is feasible and acceptable to women considering delayed PMBR. Furthermore, the DA is effective at reducing decisional conflict and increasing knowledge about delayed PMBR. The DA is an appropriate tool to be used in addition with standard care in women considering PMBR. Copyright © 2017 British Association of Plastic, Reconstructive and Aesthetic Surgeons. Published by Elsevier Ltd. All rights reserved.

Computational reduction techniques for numerical vibro-acoustic analysis of hearing aids

DEFF Research Database (Denmark)

Creixell Mediante, Ester

. In this thesis, several challenges encountered in the process of modelling and optimizing hearing aids are addressed. Firstly, a strategy for modelling the contacts between plastic parts for harmonic analysis is developed. Irregularities in the contact surfaces, inherent to the manufacturing process of the parts....... Secondly, the applicability of Model Order Reduction (MOR) techniques to lower the computational complexity of hearing aid vibro-acoustic models is studied. For fine frequency response calculation and optimization, which require solving the numerical model repeatedly, a computational challenge...... is encountered due to the large number of Degrees of Freedom (DOFs) needed to represent the complexity of the hearing aid system accurately. In this context, several MOR techniques are discussed, and an adaptive reduction method for vibro-acoustic optimization problems is developed as a main contribution. Lastly...

Computer-Aided Transformation of PDE Models: Languages, Representations, and a Calculus of Operations

Science.gov (United States)

2016-01-05

Computer-aided transformation of PDE models: languages, representations, and a calculus of operations A domain-specific embedded language called...languages, representations, and a calculus of operations Report Title A domain-specific embedded language called ibvp was developed to model initial...Computer-aided transformation of PDE models: languages, representations, and a calculus of operations 1 Vision and background Physical and engineered systems

Automatic computer aided analysis algorithms and system for adrenal tumors on CT images.

Science.gov (United States)

Chai, Hanchao; Guo, Yi; Wang, Yuanyuan; Zhou, Guohui

2017-12-04

The adrenal tumor will disturb the secreting function of adrenocortical cells, leading to many diseases. Different kinds of adrenal tumors require different therapeutic schedules. In the practical diagnosis, it highly relies on the doctor's experience to judge the tumor type by reading the hundreds of CT images. This paper proposed an automatic computer aided analysis method for adrenal tumors detection and classification. It consisted of the automatic segmentation algorithms, the feature extraction and the classification algorithms. These algorithms were then integrated into a system and conducted on the graphic interface by using MATLAB Graphic user interface (GUI). The accuracy of the automatic computer aided segmentation and classification reached 90% on 436 CT images. The experiments proved the stability and reliability of this automatic computer aided analytic system.

Computer-aided diagnosis with morphological features for breast lesion on sonograms

International Nuclear Information System (INIS)

Huang Yu-Len; Jiang Yu-Ru; Shiu Jia-Jia; Chen Dar-Ren; Moon Woo Kyung

2007-01-01

Information about shape, provided by a breast tumor contour is important to physicians in making diagnostic decisions. To avoid needless biopsy and enhance the diagnostic accuracy, a computer-aided diagnosis (CAD) system can provide a second beneficial support reference. This paper aimed to evaluate the potential role of the CAD with automatic contouring and morphologic analysis in the differential of breast tumors for ultrasound (US) images. This study evaluated 118 breast lesions. The suspicious tumor contour in the digitized US image was automatically extracted by the proposed contouring algorithm. Then 20 practical morphologic features from the extracted contour were calculated and a support vector machine (SVM) classifier identified the breast tumor as benign or malignant. The area (Az) under the receiver operating characteristic (ROC) curve for the proposed CAD system was 0.91 ± 0.03. This system differentiates benign from malignant breast tumors with relative high accuracy and is therefore clinically useful to reduce patients needed for dispensable breast biopsy. (orig.)

MINDS - Medical Information Network Decision Support System

National Research Council Canada - National Science Library

Armenian, H. K

2008-01-01

.... The increase in and complexity of medical data at various levels of resolution has increased the need for system level advancements in clinical decision support systems that provide computer-aided...

The Development of Computer-Aided Design for Electrical Equipment Selection and Arrangement of 10 Kv Switchgear

Directory of Open Access Journals (Sweden)

Chernaya Anastassiya

2015-01-01

Full Text Available The paper intends to give an overview of a computer-aided design program application. The research includes two main parts: the development of a computer-aided design for an appropriate switchgear selection and its arrangement in an indoor switchgear layout. Matlab program was used to develop a computer-aided design system. The use of this program considerably simplifies the selection and arrangement of 10 kV switchgear.

Decision aid on breast cancer screening reduces attendance rate: results of a large-scale, randomized, controlled study by the DECIDEO group

Science.gov (United States)

Bourmaud, Aurelie; Soler-Michel, Patricia; Oriol, Mathieu; Regnier, Véronique; Tinquaut, Fabien; Nourissat, Alice; Bremond, Alain; Moumjid, Nora; Chauvin, Franck

2016-01-01

Controversies regarding the benefits of breast cancer screening programs have led to the promotion of new strategies taking into account individual preferences, such as decision aid. The aim of this study was to assess the impact of a decision aid leaflet on the participation of women invited to participate in a national breast cancer screening program. This Randomized, multicentre, controlled trial. Women aged 50 to 74 years, were randomly assigned to receive either a decision aid or the usual invitation letter. Primary outcome was the participation rate 12 months after the invitation. 16 000 women were randomized and 15 844 included in the modified intention-to-treat analysis. The participation rate in the intervention group was 40.25% (3174/7885 women) compared with 42.13% (3353/7959) in the control group (p = 0.02). Previous attendance for screening (RR = 6.24; [95%IC: 5.75-6.77]; p < 0.0001) and medium household income (RR = 1.05; [95%IC: 1.01-1.09]; p = 0.0074) were independently associated with attendance for screening. This large-scale study demonstrates that the decision aid reduced the participation rate. The decision aid activate the decision making process of women toward non-attendance to screening. These results show the importance of promoting informed patient choices, especially when those choices cannot be anticipated. PMID:26883201

The Effects of Computer-Aided Design Software on Engineering Students' Spatial Visualisation Skills

Science.gov (United States)

Kösa, Temel; Karakus, Fatih

2018-01-01

The purpose of this study was to determine the influence of computer-aided design (CAD) software-based instruction on the spatial visualisation skills of freshman engineering students in a computer-aided engineering drawing course. A quasi-experimental design was applied, using the Purdue Spatial Visualization Test-Visualization of Rotations…

Virtual Reality versus Computer-Aided Exposure Treatments for Fear of Flying

Science.gov (United States)

Tortella-Feliu, Miquel; Botella, Cristina; Llabres, Jordi; Breton-Lopez, Juana Maria; del Amo, Antonio Riera; Banos, Rosa M.; Gelabert, Joan M.

2011-01-01

Evidence is growing that two modalities of computer-based exposure therapies--virtual reality and computer-aided psychotherapy--are effective in treating anxiety disorders, including fear of flying. However, they have not yet been directly compared. The aim of this study was to analyze the efficacy of three computer-based exposure treatments for…

[Three-dimensional computer aided design for individualized post-and-core restoration].

Science.gov (United States)

Gu, Xiao-yu; Wang, Ya-ping; Wang, Yong; Lü, Pei-jun

2009-10-01

To develop a method of three-dimensional computer aided design (CAD) of post-and-core restoration. Two plaster casts with extracted natural teeth were used in this study. The extracted teeth were prepared and scanned using tomography method to obtain three-dimensional digitalized models. According to the basic rules of post-and-core design, posts, cores and cavity surfaces of the teeth were designed using the tools for processing point clouds, curves and surfaces on the forward engineering software of Tanglong prosthodontic system. Then three-dimensional figures of the final restorations were corrected according to the configurations of anterior teeth, premolars and molars respectively. Computer aided design of 14 post-and-core restorations were finished, and good fitness between the restoration and the three-dimensional digital models were obtained. Appropriate retention forms and enough spaces for the full crown restorations can be obtained through this method. The CAD of three-dimensional figures of the post-and-core restorations can fulfill clinical requirements. Therefore they can be used in computer-aided manufacture (CAM) of post-and-core restorations.

A Computer-Aided Diagnosis System for Breast Cancer Combining Mammography and Proteomics

Science.gov (United States)

2007-05-01

for sonography,” Ultrasound Med. Biol. 26, 405-411 2000. 20K. Horsch, M. L. Giger, L. A. Venta , and C. J. Vyborny, “Computerized diagnosis of breast...lesions on ultrasound,” Med. Phys. 29, 157-164 2002. 21K. Horsch, M. L. Giger, C. J. Vyborny, and L. A. Venta , “Performance of computer-aided...Horsch K, Giger ML, Vyborny CJ, Venta LA. Performance of computer-aided diagnosis in the interpretation of lesions on breast sonography. Acad Radiol

A Framework of a Computerized Decision Aid to Improve Group Judgments

Directory of Open Access Journals (Sweden)

Utpal Bose

2009-09-01

Full Text Available In organizations, groups of decision makers often meet to make judgments as a group on issues and tasks such as, hiring a person who best fits an open position. In such tasks called cognitive conflict tasks, where there is no conflict of interest, group members attempting to reach a common solution often differ on their perspectives to the problem. Cognitive conflicts have been studied in the context of Social Judgment Theory, which posits that persons or judges make a set of judgments about a set of events based on observation of a set of cues related to the events. Disagreement arises because the judges fail to understand each other’s judgment making policies. In order to reduce disagreement and move the group towards a group judgment policy that has the consensus of the group members and is applied consistently, a computerized decision aid is proposed that can be built around a Group Support System using cognitive mapping as a method of providing cognitive feedback and the Analytic Hierarchy Process to process the conflicting criteria and help an individual formulate a judgment policy, as well as aggregate the individual policies into a group judgment policy. It is argued that such as decision aid by supporting every decision maker in the group to effectively use information about the task so that they have a good understanding of the judgment policy they form, to communicate their evaluation policies accurately to other members, and by providing an iterative mechanism through which members can arrive at a compromise solution to the task, is expected to improve the quality of group judgments.

The Research of Computer Aided Farm Machinery Designing Method Based on Ergonomics

Science.gov (United States)

Gao, Xiyin; Li, Xinling; Song, Qiang; Zheng, Ying

Along with agricultural economy development, the farm machinery product type Increases gradually, the ergonomics question is also getting more and more prominent. The widespread application of computer aided machinery design makes it possible that farm machinery design is intuitive, flexible and convenient. At present, because the developed computer aided ergonomics software has not suitable human body database, which is needed in view of farm machinery design in China, the farm machinery design have deviation in ergonomics analysis. This article puts forward that using the open database interface procedure in CATIA to establish human body database which aims at the farm machinery design, and reading the human body data to ergonomics module of CATIA can product practical application virtual body, using human posture analysis and human activity analysis module to analysis the ergonomics in farm machinery, thus computer aided farm machinery designing method based on engineering can be realized.

Computer Aided Multi-Data Fusion Dismount Modeling

Science.gov (United States)

2012-03-22

dependent on a particular environmental condition. They are costly, cumbersome, and involve dedicated software practices and particular knowledge to operate...allow manipulation of 2D matrices, like Microsoft Excel or Libre Office. The second alternative is to modify an already created model (MEM). The model... software . Therefore, with the described computer aided multi-data dismount model the researcher will be able to attach signatures to any desired

Computer-Aided College Algebra: Learning Components that Students Find Beneficial

Science.gov (United States)

Aichele, Douglas B.; Francisco, Cynthia; Utley, Juliana; Wescoatt, Benjamin

2011-01-01

A mixed-method study was conducted during the Fall 2008 semester to better understand the experiences of students participating in computer-aided instruction of College Algebra using the software MyMathLab. The learning environment included a computer learning system for the majority of the instruction, a support system via focus groups (weekly…

Computer-Aided Detection of Polyps in CT Colonography Using Logistic Regression

NARCIS (Netherlands)

Van Ravesteijn, V.F.; Van Wijk, C.; Vos, F.M.; Truyen, R.; Peters, J.F.; Stoker, J.; Van Vliet, L.J.

2010-01-01

We present a computer-aided detection (CAD) system for computed tomography colonography that orders the polyps according to clinical relevance. TheCADsystem consists of two steps: candidate detection and supervised classification. The characteristics of the detection step lead to specific choices

Computer-Aided Test Flow in Core-Based Design

NARCIS (Netherlands)

Zivkovic, V.; Tangelder, R.J.W.T.; Kerkhoff, Hans G.

2000-01-01

This paper copes with the test-pattern generation and fault coverage determination in the core based design. The basic core-test strategy that one has to apply in the core-based design is stated in this work. A Computer-Aided Test (CAT) flow is proposed resulting in accurate fault coverage of

The Interaction of Decision Aid Usage, Training Methodology, and Personality Construct on Decision Making Among Dyadic Air Crews in a Military Environment

National Research Council Canada - National Science Library

Schipani, Salvatore

2003-01-01

..., processing, and acting upon information is often inadequate. The current research examined two levels of training, decision aiding, and homogeneity on group performance, using a personality concept classified "action orientation...

Comparisons of client and clinician views of the importance of factors in client-clinician interaction in hearing aid purchase decisions.

Science.gov (United States)

Poost-Foroosh, Laya; Jennings, Mary Beth; Cheesman, Margaret F

2015-03-01

Despite clinical recognition of the adverse effects of acquired hearing loss, only a small proportion of adults who could benefit use hearing aids. Hearing aid adoption has been studied in relationship to client-related and hearing aid technology-related factors. The influence of the client-clinician interaction in the decision to purchase hearing aids has not been explored in any depth. Importance ratings of a sample of adults having a recent hearing aid recommendation (clients) and hearing healthcare professionals (clinicians) from across Canada were compared on factors in client-clinician interactions that influence hearing aid purchase decisions. A cross-sectional approach was used to obtain online and paper-based concept ratings. Participants were 43 adults (age range, 45-85 yr) who had received a first hearing aid recommendation in the 3 mo before participation. A total of 54 audiologists and 20 hearing instrument practitioners from a variety of clinical settings who prescribed or dispensed hearing aids completed the concept-rating task. The task consisted of 122 items that had been generated via concept mapping in a previous study and which resulted in the identification of eight concepts that may influence hearing aid purchase decisions. Participants rated "the importance of each of the statements in a person's decision to purchase a hearing aid" on a 5-point Likert scale, from 1 = minimally important to 5 = extremely important. For the initial data analysis, the ratings for each of the items included in each concept were averaged for each participant to provide an estimate of the overall importance rating of each concept. Multivariate analysis of variance was used to compare the mean importance ratings of the clients to the clinicians. Ratings of individual statements were also compared in order to investigate the directionality of the importance ratings within concepts. There was a significant difference in the mean ratings for clients and clinicians for

Ecological Rationality: A Framework for Understanding and Aiding the Aging Decision Maker

Directory of Open Access Journals (Sweden)

Rui eMata

2012-02-01

Full Text Available Ecological rationality sees human rationality as the result of the adaptive fit between the human mind and the environment. The concept of ecological rationality focuses the study of cognition on two key questions: First, what are the environmental regularities to which people’s decision strategies are matched, and how frequently do these regularities occur in natural environments? Second, how well can people adapt their use of specific strategies to particular environments? Research on aging suggests a number of changes in cognitive function, for instance, deficits in learning and memory that may impact decision-making skills. However, it has been shown that simple strategies can work well in many natural environments, which suggests that age-related deficits in strategy use may not necessarily translate into diminished decision performance. Consequently, we argue that predictions about the impact of aging on decision performance depend not only on how aging affects decision-relevant capacities but also on the decision ecology in which decisions are made. In sum, we propose that the concept of the ecological rationality is crucial to understanding and aiding the aging decision maker.

Computer-Aided Test Flow in Core-Based Design

NARCIS (Netherlands)

Zivkovic, V.; Tangelder, R.J.W.T.; Kerkhoff, Hans G.

2000-01-01

This paper copes with the efficient test-pattern generation in a core-based design. A consistent Computer-Aided Test (CAT) flow is proposed based on the required core-test strategy. It generates a test-pattern set for the embedded cores with high fault coverage and low DfT area overhead. The CAT

New tools to aid in scientific computing and visualization

International Nuclear Information System (INIS)

Wallace, M.G.; Christian-Frear, T.L.

1992-01-01

In this paper, two computer programs are described which aid in the pre- and post-processing of computer generated data. CoMeT (Computational Mechanics Toolkit) is a customizable, interactive, graphical, menu-driven program that provides the analyst with a consistent user-friendly interface to analysis codes. Trans Vol (Transparent Volume Visualization) is a specialized tool for the scientific three-dimensional visualization of complex solids by the technique of volume rendering. Both tools are described in basic detail along with an application example concerning the simulation of contaminant migration from an underground nuclear repository

Effect of Computer-Presented Organizational/Memory Aids on Problem Solving Behavior.

Science.gov (United States)

Steinberg, Esther R.; And Others

This research studied the effects of computer-presented organizational/memory aids on problem solving behavior. The aids were either matrix or verbal charts shown on the display screen next to the problem. The 104 college student subjects were randomly assigned to one of the four conditions: type of chart (matrix or verbal chart) and use of charts…

Adaptive Peircean decision aid project summary assessments.

Energy Technology Data Exchange (ETDEWEB)

Senglaub, Michael E.

2007-01-01

This efforts objective was to identify and hybridize a suite of technologies enabling the development of predictive decision aids for use principally in combat environments but also in any complex information terrain. The technologies required included formal concept analysis for knowledge representation and information operations, Peircean reasoning to support hypothesis generation, Mill's's canons to begin defining information operators that support the first two technologies and co-evolutionary game theory to provide the environment/domain to assess predictions from the reasoning engines. The intended application domain is the IED problem because of its inherent evolutionary nature. While a fully functioning integrated algorithm was not achieved the hybridization and demonstration of the technologies was accomplished and demonstration of utility provided for a number of ancillary queries.

Computer aided construction of fault tree

International Nuclear Information System (INIS)

Kovacs, Z.

1982-01-01

Computer code CAT for the automatic construction of the fault tree is briefly described. Code CAT makes possible simple modelling of components using decision tables, it accelerates the fault tree construction process, constructs fault trees of different complexity, and is capable of harmonized co-operation with programs PREPandKITT 1,2 for fault tree analysis. The efficiency of program CAT and thus the accuracy and completeness of fault trees constructed significantly depends on the compilation and sophistication of decision tables. Currently, program CAT is used in co-operation with programs PREPandKITT 1,2 in reliability analyses of nuclear power plant systems. (B.S.)

Computer Aided Design Tools for Extreme Environment Electronics, Phase I

Data.gov (United States)

National Aeronautics and Space Administration — This project aims to provide Computer Aided Design (CAD) tools for radiation-tolerant, wide-temperature-range digital, analog, mixed-signal, and radio-frequency...

Computer-aided system for diabetes care in Berlin, G.D.R.

Science.gov (United States)

Thoelke, H; Meusel, K; Ratzmann, K P

1990-01-01

In the Centre of Diabetes and Metabolic Disorders of Berlin, G.D.R., a computer-aided care system has been used since 1974, aiming at relieving physicians and medical staff from routine tasks and rendering possible epidemiological research on an unselected diabetes population of a defined area. The basis of the system is the data bank on diabetics (DB), where at present data from approximately 55,000 patients are stored. DB is used as a diabetes register of Berlin. On the basis of standardised criteria of diagnosis and therapy of diabetes mellitus in our dispensary care system, DB facilitates representative epidemiological analyses of the diabetic population, e.g. prevalence, incidence, duration of diabetes, and modes of treatment. The availability of general data on the population or the selection of specified groups of patients serves the management of the care system. Also, it supports the computer-aided recall of type II diabetics, treated either with diet alone or with diet and oral drugs. In this way, the standardised evaluation of treatment strategies in large populations of diabetics is possible on the basis of uniform metabolic criteria (blood glucose plus urinary glucose). The system consists of a main computer in the data processing unit and of personal computers in the diabetes centre which can be used either individually or as terminals to the main computer. During 14 years of experience, the computer-aided out-patient care of type II diabetics has proved efficient in a big-city area with a large population.

Topology optimization aided structural design: Interpretation, computational aspects and 3D printing.

Science.gov (United States)

Kazakis, Georgios; Kanellopoulos, Ioannis; Sotiropoulos, Stefanos; Lagaros, Nikos D

2017-10-01

Construction industry has a major impact on the environment that we spend most of our life. Therefore, it is important that the outcome of architectural intuition performs well and complies with the design requirements. Architects usually describe as "optimal design" their choice among a rather limited set of design alternatives, dictated by their experience and intuition. However, modern design of structures requires accounting for a great number of criteria derived from multiple disciplines, often of conflicting nature. Such criteria derived from structural engineering, eco-design, bioclimatic and acoustic performance. The resulting vast number of alternatives enhances the need for computer-aided architecture in order to increase the possibility of arriving at a more preferable solution. Therefore, the incorporation of smart, automatic tools in the design process, able to further guide designer's intuition becomes even more indispensable. The principal aim of this study is to present possibilities to integrate automatic computational techniques related to topology optimization in the phase of intuition of civil structures as part of computer aided architectural design. In this direction, different aspects of a new computer aided architectural era related to the interpretation of the optimized designs, difficulties resulted from the increased computational effort and 3D printing capabilities are covered here in.

Critiquing the Computer-Aided Design of Dental Prostheses.

Science.gov (United States)

Fitzpatrick, F. J.; And Others

This paper describes RaPiD, a computer-aided assistant for the design of dental prostheses called removable partial dentures. The user manipulates icons directly to indicate the desired design solution to a given clinical situation. A developing design is represented as a logic database of components in a design; expert rules are applied as…

DEVELOPMENT OF COMPUTER AIDED DESIGN OF CHAIN COUPLING

Directory of Open Access Journals (Sweden)

Sergey Aleksandrovich Sergeev

2015-12-01

Full Text Available The present paper describes the development stages of computer-aided design of chain couplings. The first stage is the automation of traditional design techniques (intermediate automation. The second integrated automation with the development of automated equipment and production technology, including on the basis of flexible manufacturing systems (high level of automation.

Computer Aided Battery Engineering Consortium

Energy Technology Data Exchange (ETDEWEB)

Pesaran, Ahmad

2016-06-07

A multi-national lab collaborative team was assembled that includes experts from academia and industry to enhance recently developed Computer-Aided Battery Engineering for Electric Drive Vehicles (CAEBAT)-II battery crush modeling tools and to develop microstructure models for electrode design - both computationally efficient. Task 1. The new Multi-Scale Multi-Domain model framework (GH-MSMD) provides 100x to 1,000x computation speed-up in battery electrochemical/thermal simulation while retaining modularity of particles and electrode-, cell-, and pack-level domains. The increased speed enables direct use of the full model in parameter identification. Task 2. Mechanical-electrochemical-thermal (MECT) models for mechanical abuse simulation were simultaneously coupled, enabling simultaneous modeling of electrochemical reactions during the short circuit, when necessary. The interactions between mechanical failure and battery cell performance were studied, and the flexibility of the model for various batteries structures and loading conditions was improved. Model validation is ongoing to compare with test data from Sandia National Laboratories. The ABDT tool was established in ANSYS. Task 3. Microstructural modeling was conducted to enhance next-generation electrode designs. This 3- year project will validate models for a variety of electrodes, complementing Advanced Battery Research programs. Prototype tools have been developed for electrochemical simulation and geometric reconstruction.

Database organization for computer-aided characterization of laser diode

International Nuclear Information System (INIS)

Oyedokun, Z.O.

1988-01-01

Computer-aided data logging involves a huge amount of data which must be properly managed for optimized storage space, easy access, retrieval and utilization. An organization method is developed to enhance the advantages of computer-based data logging of the testing of the semiconductor injection laser which optimize storage space, permit authorized user easy access and inhibits penetration. This method is based on unique file identification protocol tree structure and command file-oriented access procedures

Computer-Aided Design Method of Warp-Knitted Jacquard Spacer Fabrics

Directory of Open Access Journals (Sweden)

Li Xinxin

2016-06-01

Full Text Available Based on a further study on knitting and jacquard principles, this paper presents a mathematical design model to make computer-aided design of warp-knitted jacquard spacer fabrics more efficient. The mathematical model with matrix method employs three essential elements of chain notation, threading and Jacquard designing. With this model, the processing to design warp-knitted jacquard spacer fabrics with CAD software is also introduced. In this study, the sports shoes which have separated functional areas according to the feet structure and characteristics of movement are analysed. The results show the different patterns on Jacquard spacer fabrics that are seamlessly stitched with jacquard technics. The computer-aided design method of warp-knitted jacquard spacer fabrics is efficient and simple.

Study on computer-aided simulation procedure for multicomponent separating cascade

International Nuclear Information System (INIS)

Kinoshita, Masahiro

1982-11-01

The present report reviews the author's study on the computer-aided simulation procedure for a multicomponent separating cascade. As a conclusion, two very powerful simulation procedures have been developed for cascades composed of separating elements whose separation factors are very large. They are applicable in cases where interstage flow rates are input variables for the calculation and stage separation factors are given either as constants or as functions of compositions of the up and down streams. As an application of the new procedure, a computer-aided simulation study has been performed for hydrogen isotope separating cascades by porous membrane method. A cascade system configuration is developed and pertinent design specifications are determined in an example case of the feed conditions and separation requirements. (author)

Computer-aided ultrasonic inspection of steam turbine rotors

Energy Technology Data Exchange (ETDEWEB)

Mayer, K H; Weber, M; Weiss, M [GEC ALSTHOM Energie GmbH, Nuremberg (Germany)

1999-12-31

As the output and economic value of power plants increase, the detection and sizing of the type of flaws liable to occur in the rotors of turbines using ultrasonic methods assumes increasing importance. An ultrasonic inspection carried out at considerable expense is expected to bring to light all safety-relevant flaws and to enable their size to be determined so as to permit a fracture-mechanics analysis to assess the reliability of the rotor under all possible stresses arising in operation with a high degree of accuracy. The advanced computer-aided ultrasonic inspection of steam turbine rotors have improved reliability, accuracy and reproducibility of ultrasonic inspection. Further, there has been an improvement in the resolution of resolvable group indications by applying reconstruction and imagine methods. In general, it is also true for the advanced computer-aided ultrasonic inspection methods that, in the case of flaw-affected forgings, automated data acquisition provides a substantial rationalization and a significant documentation of the results for the fracture mechanics assessment compared to manual inspection. (orig.) 8 refs.

Computer-aided ultrasonic inspection of steam turbine rotors

Energy Technology Data Exchange (ETDEWEB)

Mayer, K.H.; Weber, M.; Weiss, M. [GEC ALSTHOM Energie GmbH, Nuremberg (Germany)

1998-12-31

As the output and economic value of power plants increase, the detection and sizing of the type of flaws liable to occur in the rotors of turbines using ultrasonic methods assumes increasing importance. An ultrasonic inspection carried out at considerable expense is expected to bring to light all safety-relevant flaws and to enable their size to be determined so as to permit a fracture-mechanics analysis to assess the reliability of the rotor under all possible stresses arising in operation with a high degree of accuracy. The advanced computer-aided ultrasonic inspection of steam turbine rotors have improved reliability, accuracy and reproducibility of ultrasonic inspection. Further, there has been an improvement in the resolution of resolvable group indications by applying reconstruction and imagine methods. In general, it is also true for the advanced computer-aided ultrasonic inspection methods that, in the case of flaw-affected forgings, automated data acquisition provides a substantial rationalization and a significant documentation of the results for the fracture mechanics assessment compared to manual inspection. (orig.) 8 refs.

[A computer-aided image diagnosis and study system].

Science.gov (United States)

Li, Zhangyong; Xie, Zhengxiang

2004-08-01

The revolution in information processing, particularly the digitizing of medicine, has changed the medical study, work and management. This paper reports a method to design a system for computer-aided image diagnosis and study. Combined with some good idea of graph-text system and picture archives communicate system (PACS), the system was realized and used for "prescription through computer", "managing images" and "reading images under computer and helping the diagnosis". Also typical examples were constructed in a database and used to teach the beginners. The system was developed by the visual developing tools based on object oriented programming (OOP) and was carried into operation on the Windows 9X platform. The system possesses friendly man-machine interface.

Computer-aided Nonlinear Control System Design Using Describing Function Models

CERN Document Server

Nassirharand, Amir

2012-01-01

A systematic computer-aided approach provides a versatile setting for the control engineer to overcome the complications of controller design for highly nonlinear systems. Computer-aided Nonlinear Control System Design provides such an approach based on the use of describing functions. The text deals with a large class of nonlinear systems without restrictions on the system order, the number of inputs and/or outputs or the number, type or arrangement of nonlinear terms. The strongly software-oriented methods detailed facilitate fulfillment of tight performance requirements and help the designer to think in purely nonlinear terms, avoiding the expedient of linearization which can impose substantial and unrealistic model limitations and drive up the cost of the final product. Design procedures are presented in a step-by-step algorithmic format each step being a functional unit with outputs that drive the other steps. This procedure may be easily implemented on a digital computer with example problems from mecha...

A comparative analysis of multi-level computer-assisted decision making systems for traumatic injuries

Directory of Open Access Journals (Sweden)

Huynh Toan

2009-01-01

airlifted TBI patients. Conclusion This study creates an efficient computer-aided rule-based system that can be employed in decision making in TBI cases. The rule-bases apply methods that combine CART and C4.5 with logistic regression to improve rule performance and quality. For final outcome prediction for TBI cases, the resulting rule-bases outperform systems that utilize all available variables.

Development of computer-aided auto-ranging technique for a computed radiography system

International Nuclear Information System (INIS)

Ishida, M.; Shimura, K.; Nakajima, N.; Kato, H.

1988-01-01

For a computed radiography system, the authors developed a computer-aided autoranging technique in which the clinically useful image data are automatically mapped to the available display range. The preread image data are inspected to determine the location of collimation. A histogram of the pixels inside the collimation is evaluated regarding characteristic values such as maxima and minima, and then the optimal density and contrast are derived for the display image. The effect of the autoranging technique was investigated at several hospitals in Japan. The average rate of films lost due to undesirable density or contrast was about 0.5%

Assisted supervision of a computer aided tele-operation system

Energy Technology Data Exchange (ETDEWEB)

Le Bars, H; Gravez, P; Fournier, R

1994-12-31

This paper talks about Computer Aided Tele-operation (CAT) in dismantling and maintenance of nuclear plants. The current research orientations at CEA, basic concepts of the supervision assistance system and the realisation of a prototype are presented. (TEC). 3 refs., 4 figs.

Assisted supervision of a computer aided tele-operation system

International Nuclear Information System (INIS)

Le Bars, H.; Gravez, P.; Fournier, R.

1994-01-01

This paper talks about Computer Aided Tele-operation (CAT) in dismantling and maintenance of nuclear plants. The current research orientations at CEA, basic concepts of the supervision assistance system and the realisation of a prototype are presented. (TEC). 3 refs., 4 figs

Preaching What We Practice: Teaching Ethical Decision-Making to Computer Security Professionals

Science.gov (United States)

Fleischmann, Kenneth R.

The biggest challenge facing computer security researchers and professionals is not learning how to make ethical decisions; rather it is learning how to recognize ethical decisions. All too often, technology development suffers from what Langdon Winner terms technological somnambulism - we sleepwalk through our technology design, following past precedents without a second thought, and fail to consider the perspectives of other stakeholders [1]. Computer security research and practice involves a number of opportunities for ethical decisions. For example, decisions about whether or not to automatically provide security updates involve tradeoffs related to caring versus user autonomy. Decisions about online voting include tradeoffs between convenience and security. Finally, decisions about routinely screening e-mails for spam involve tradeoffs of efficiency and privacy. It is critical that these and other decisions facing computer security researchers and professionals are confronted head on as value-laden design decisions, and that computer security researchers and professionals consider the perspectives of various stakeholders in making these decisions.

Assessment of the fit of removable partial denture fabricated by computer-aided designing/computer aided manufacturing technology.

Science.gov (United States)

Arafa, Khalid A O

2018-01-01

To assess the level of evidence that supports the quality of fit for removable partial denture (RPD) fabricated by computer-aided designing/computer aided manufacturing (CAD/CAM) and rapid prototyping (RP) technology. Methods: An electronic search was performed in Google Scholar, PubMed, and Cochrane library search engines, using Boolean operators. All articles published in English and published in the period from 1950 until April 2017 were eligible to be included in this review. The total number of articles contained the search terms in any part of the article (including titles, abstracts, or article texts) were screened, which resulted in 214 articles. After exclusion of irrelevant and duplicated articles, 12 papers were included in this systematic review.  Results: All the included studies were case reports, except one study, which was a case series that recruited 10 study participants. The visual and tactile examination in the cast or clinically in the patient's mouth was the most-used method for assessment of the fit of RPDs. From all included studies, only one has assessed the internal fit between RPDs and oral tissues using silicone registration material. The vast majority of included studies found that the fit of RPDs ranged from satisfactory to excellent fit. Conclusion: Despite the lack of clinical trials that provide strong evidence, the available evidence supported the claim of good fit of RPDs fabricated by new technologies using CAD/CAM.

A Complete Interactive Graphical Computer-Aided Instruction System.

Science.gov (United States)

Abrams, Steven Selby

The use of interactive graphics in computer-aided instruction systems is discussed with emphasis placed on two requirements of such a system. The first is the need to provide the teacher with a useful tool with which to design and modify teaching sessions tailored to the individual needs and capabilities of the students. The second is the…

Caesy: A software tool for computer-aided engineering

Science.gov (United States)

Wette, Matt

1993-01-01

A new software tool, Caesy, is described. This tool provides a strongly typed programming environment for research in the development of algorithms and software for computer-aided control system design. A description of the user language and its implementation as they currently stand are presented along with a description of work in progress and areas of future work.

Factors Influencing Organization Adoption Decision On Cloud Computing

OpenAIRE

Ailar Rahimli

2013-01-01

Cloud computing is a developing field, using by organization that require to computing resource to provide the organizational computing needs. The goal of this research is evaluate the factors that influence on organization decision to adopt the cloud computing in Malaysia. Factors that relate to cloud computing adoption that include : need for cloud computing, cost effectiveness, security effectiveness of cloud computing and reliability. This paper evaluated the factors that influence on ado...

Computer training aids for nuclear operator training

International Nuclear Information System (INIS)

Phillips, J.G.P.; Binns, J.B.H.

1983-01-01

The Royal Navy's Nuclear Propulsion School at HMS SULTAN which is responsible for training all ratings and officers who operate Submarine Pressurised Water Reactor plants, has available a varied selection of classroom simulator training aids as well as purpose built Submarine Manoeuvring Room simulators. The use of these classroom training aids in the twelve months prior to Autumn 1981 is discussed. The advantages and disadvantages of using relatively expensive computer based aids to support classroom instruction for students who do not investigate mathematically the dynamics of the Reactor Plant are identified. The conclusions drawn indicate that for students of limited academic ability the classroom simulators are disproportionately expensive in cost, maintenance load, and instructional time. Secondly, the experience gained in the use of the Manoeuvring Room Simulators to train future operators who have just finished the academic phase of their training is outlined. The possible pitfalls for the instructor are discussed and the lessons learnt, concluding that these simulators provide a valuable substitute for the live plant enabling trainees to be brought up to a common standard and reducing their on job training time to an acceptable level. (author)

Progress of the Computer-Aided Engineering of Electric Drive Vehicle Batteries (CAEBAT) (Presentation)

Energy Technology Data Exchange (ETDEWEB)

Pesaran, A. A.; Han, T.; Hartridge, S.; Shaffer, C.; Kim, G. H.; Pannala, S.

2013-06-01

This presentation, Progress of Computer-Aided Engineering of Electric Drive Vehicle Batteries (CAEBAT) is about simulation and computer-aided engineering (CAE) tools that are widely used to speed up the research and development cycle and reduce the number of build-and-break steps, particularly in the automotive industry. Realizing this, DOE?s Vehicle Technologies Program initiated the CAEBAT project in April 2010 to develop a suite of software tools for designing batteries.

Consideration of Insulin Pumps or Continuous Glucose Monitors by Adolescents With Type 1 Diabetes and Their Parents: Stakeholder Engagement in the Design of Web-Based Decision Aids.

Science.gov (United States)

Wysocki, Tim; Hirschfeld, Fiona; Miller, Louis; Izenberg, Neil; Dowshen, Steven A; Taylor, Alex; Milkes, Amy; Shinseki, Michelle T; Bejarano, Carolina; Kozikowski, Chelsea; Kowal, Karen; Starr-Ashton, Penny; Ross, Judith L; Kummer, Mark; Carakushansky, Mauri; Lyness, D'Arcy; Brinkman, William; Pierce, Jessica; Fiks, Alexander; Christofferson, Jennifer; Rafalko, Jessica; Lawson, Margaret L

2016-08-01

This article describes the stakeholder-driven design, development, and testing of web-based, multimedia decision aids for youth with type 1 diabetes who are considering the insulin pump or continuous glucose monitoring and their parents. This is the initial phase of work designed to develop and evaluate the efficacy of these decision aids in promoting improved decision-making engagement with use of a selected device. Qualitative interviews of 36 parents and adolescents who had previously faced these decisions and 12 health care providers defined the content, format and structure of the decision aids. Experts in children's health media helped the research team to plan, create, and refine multimedia content and its presentation. A web development firm helped organize the content into a user-friendly interface and enabled tracking of decision aid utilization. Throughout, members of the research team, adolescents, parents, and 3 expert consultants offered perspectives about the website content, structure, and function until the design was complete. With the decision aid websites completed, the next phase of the project is a randomized controlled trial of usual clinical practice alone or augmented by use of the decision aid websites. Stakeholder-driven development of multimedia, web-based decision aids requires meticulous attention to detail but can yield exceptional resources for adolescents and parents contemplating major changes to their diabetes regimens. © 2016 The Author(s).

Computer aided analysis of disturbances

International Nuclear Information System (INIS)

Baldeweg, F.; Lindner, A.

1986-01-01

Computer aided analysis of disturbances and the prevention of failures (diagnosis and therapy control) in technological plants belong to the most important tasks of process control. Research in this field is very intensive due to increasing requirements to security and economy of process control and due to a remarkable increase of the efficiency of digital electronics. This publication concerns with analysis of disturbances in complex technological plants, especially in so called high risk processes. The presentation emphasizes theoretical concept of diagnosis and therapy control, modelling of the disturbance behaviour of the technological process and the man-machine-communication integrating artificial intelligence methods, e.g., expert system approach. Application is given for nuclear power plants. (author)

Computer-Aided Template for Model Reuse, Development and Maintenance

DEFF Research Database (Denmark)

Fedorova, Marina; Sin, Gürkan; Gani, Rafiqul

2014-01-01

A template-based approach for model development is presented in this work. Based on a model decomposition technique, the computer-aided template concept has been developed. This concept is implemented as a software tool , which provides a user-friendly interface for following the workflow steps...

Framework for Computer-Aided Evolution of Object-Oriented Designs

NARCIS (Netherlands)

Ciraci, S.; van den Broek, P.M.; Aksit, Mehmet

2008-01-01

In this paper, we describe a framework for the computer aided evolution of the designs of object-oriented software systems. Evolution mechanisms are software structures that prepare software for certain type of evolutions. The framework uses a database which holds the evolution mechanisms, modeled

Computer aided fault tree synthesis

International Nuclear Information System (INIS)

Poucet, A.

1983-01-01

Nuclear as well as non-nuclear organisations are showing during the past few years a growing interest in the field of reliability analysis. This urges for the development of powerful, state of the art methods and computer codes for performing such analysis on complex systems. In this report an interactive, computer aided approach is discussed, based on the well known fault tree technique. The time consuming and difficut task of manually constructing a system model (one or more fault trees) is replaced by an efficient interactive procedure in which the flexibility and the learning process inherent to the manual approach are combined with the accuracy in the modelling and the speed of the fully automatical approach. The method presented is based upon the use of a library containing component models. The possibility of setting up a standard library of models of general use and the link with a data collection system are discussed. The method has been implemented in the CAFTS-SALP software package which is described shortly in the report

Computer-Aided Diagnosis of Breast Cancer: A Multi-Center Demonstrator

National Research Council Canada - National Science Library

Floyd, Carey

2000-01-01

.... The focus has been to gather data from multiple sites in order to verify and whether the artificial neural network computer aid to the diagnosis of breast cancer can be translated between locations...

Computer-Aided Experiment Planning toward Causal Discovery in Neuroscience.

Science.gov (United States)

Matiasz, Nicholas J; Wood, Justin; Wang, Wei; Silva, Alcino J; Hsu, William

2017-01-01

Computers help neuroscientists to analyze experimental results by automating the application of statistics; however, computer-aided experiment planning is far less common, due to a lack of similar quantitative formalisms for systematically assessing evidence and uncertainty. While ontologies and other Semantic Web resources help neuroscientists to assimilate required domain knowledge, experiment planning requires not only ontological but also epistemological (e.g., methodological) information regarding how knowledge was obtained. Here, we outline how epistemological principles and graphical representations of causality can be used to formalize experiment planning toward causal discovery. We outline two complementary approaches to experiment planning: one that quantifies evidence per the principles of convergence and consistency, and another that quantifies uncertainty using logical representations of constraints on causal structure. These approaches operationalize experiment planning as the search for an experiment that either maximizes evidence or minimizes uncertainty. Despite work in laboratory automation, humans must still plan experiments and will likely continue to do so for some time. There is thus a great need for experiment-planning frameworks that are not only amenable to machine computation but also useful as aids in human reasoning.

Marginal accuracy of computer-aided design- and computer-aided manufacturing-fabricated full-arch zirconia restoration.

Science.gov (United States)

Juntavee, Niwut; Sirisathit, Issarawas

2018-01-01

This study evaluated marginal accuracy of full-arch zirconia restoration fabricated from two digital computer-aided design and computer-aided manufacturing (CAD-CAM) systems (Trios-3 and CS3500) in comparison to conventional cast metal restoration. A stainless steel model comprising two canine and two molar abutments was used as a master model for full-arch reconstruction. The canine and molar abutments were machined in a cylindrical shape with 5° taper and chamfer margin. The CAD-CAM systems based on the digital approach were used to construct the full-arch zirconia restoration. The conventional cast metal restoration was fabricated according to a conventional lost-wax technique using nickel-chromium alloys. Ten restorations were fabricated from each system. The marginal accuracy of each restoration was determined at four locations for each abutment. An analysis of variance (ANOVA) and Tukey's honest significant difference (HSD) multiple comparisons were used to determine statistically significant difference at 95% confidence interval. The mean values of marginal accuracy of restorations fabricated from conventional casting, Trios-3, and CS3500 were 48.59±4.16 μm, 53.50±5.66 μm, and 56.47±5.52 μm, respectively. ANOVA indicated significant difference in marginal fit of restorations among various systems. The marginal discrepancy of zirconia restoration fabricated from the CS3500 system demonstrated significantly larger gap than that fabricated from the 3Shape system ( p marginal gap than the conventional cast metal restoration ( p marginal fits than that from the CS3500, although, both were slightly less accurate than the conventional cast restoration. However, the marginal discrepancies of restoration produced by both CAD-CAM systems were within the clinically acceptable range and satisfactorily precise to be suggested for construction full-arch zirconia restoration.

Decision aid use during post-biopsy consultations for localized prostate cancer.

Science.gov (United States)

Holmes-Rovner, Margaret; Srikanth, Akshay; Henry, Stephen G; Langford, Aisha; Rovner, David R; Fagerlin, Angela

2018-02-01

Decision Aids (DAs) effectively translate medical evidence for patients but are not routinely used in clinical practice. Little is known about how DAs are used during patient-clinician encounters. To characterize the content and communicative function of high-quality DAs during diagnostic clinic visits for prostate cancer. 252 men newly diagnosed with localized prostate cancer who had received a DA, 45 treating physicians at 4 US Veterans Administration urology clinics. Qualitative analysis of transcribed audio recordings was used to inductively develop categories capturing content and function of all direct references to DAs (booklet talk). The presence or absence of any booklet talk per transcript was also calculated. Booklet talk occurred in 55% of transcripts. Content focused on surgical procedures (36%); treatment choice (22%); and clarifying risk classification (17%). The most common function of booklet talk was patient corroboration of physicians' explanations (42%), followed by either physician or patient acknowledgement that the patient had the booklet. Codes reflected the absence of DA use for shared decision-making. In regression analysis, predictors of booklet talk were fewer years of patient education (P = .027) and more time in the encounter (P = .027). Patient race, DA type, time reading the DA, physician informing quality and physician age did not predict booklet talk. Results show that good decision aids, systematically provided to patients, appeared to function not to open up deliberations about how to balance benefits and harms of competing treatments, but rather to allow patients to ask narrow technical questions about recommended treatments. © 2017 The Authors Health Expectations Published by John Wiley & Sons Ltd.

Balancing emotion and cognition: a case for decision aiding in conservation efforts.

Science.gov (United States)

Wilson, Robyn S

2008-12-01

Despite advances in the quality of participatory decision making for conservation, many current efforts still suffer from an inability to bridge the gap between science and policy. Judgment and decision-making research suggests this gap may result from a person's reliance on affect-based shortcuts in complex decision contexts. I examined the results from 3 experiments that demonstrate how affect (i.e., the instantaneous reaction one has to a stimulus) influences individual judgments in these contexts and identified techniques from the decision-aiding literature that help encourage a balance between affect-based emotion and cognition in complex decision processes. In the first study, subjects displayed a lack of focus on their stated conservation objectives and made decisions that reflected their initial affective impressions. Value-focused approaches may help individuals incorporate all the decision-relevant objectives by making the technical and value-based objectives more salient. In the second study, subjects displayed a lack of focus on statistical risk and again made affect-based decisions. Trade-off techniques may help individuals incorporate relevant technical data, even when it conflicts with their initial affective impressions or other value-based objectives. In the third study, subjects displayed a lack of trust in decision-making authorities when the decision involved a negatively affect-rich outcome (i.e., a loss). Identifying shared salient values and increasing procedural fairness may help build social trust in both decision-making authorities and the decision process.

Accuracy evaluation of metal copings fabricated by computer-aided milling and direct metal laser sintering systems.

Science.gov (United States)

Park, Jong-Kyoung; Lee, Wan-Sun; Kim, Hae-Young; Kim, Woong-Chul; Kim, Ji-Hwan

2015-04-01

To assess the marginal and internal gaps of the copings fabricated by computer-aided milling and direct metal laser sintering (DMLS) systems in comparison to casting method. Ten metal copings were fabricated by casting, computer-aided milling, and DMLS. Seven mesiodistal and labiolingual positions were then measured, and each of these were divided into the categories; marginal gap (MG), cervical gap (CG), axial wall at internal gap (AG), and incisal edge at internal gap (IG). Evaluation was performed by a silicone replica technique. A digital microscope was used for measurement of silicone layer. Statistical analyses included one-way and repeated measure ANOVA to test the difference between the fabrication methods and categories of measured points (α=.05), respectively. The mean gap differed significantly with fabrication methods (P<.001). Casting produced the narrowest gap in each of the four measured positions, whereas CG, AG, and IG proved narrower in computer-aided milling than in DMLS. Thus, with the exception of MG, all positions exhibited a significant difference between computer-aided milling and DMLS (P<.05). Although the gap was found to vary with fabrication methods, the marginal and internal gaps of the copings fabricated by computer-aided milling and DMLS fell within the range of clinical acceptance (<120 µm). However, the statistically significant difference to conventional casting indicates that the gaps in computer-aided milling and DMLS fabricated restorations still need to be further reduced.

Chapter 6 – Computer-Aided Molecular Design and Property Prediction

DEFF Research Database (Denmark)

Gani, Rafiqul; Zhang, L.; Kalakul, Sawitree

2017-01-01

for the initial stages of the design/development process. Therefore, computer-aided molecular design and property prediction techniques are two topics that play important roles in chemical product design, analysis, and application. In this chapter, an overview of the concepts, methods, and tools related......Today's society needs many chemical-based products for its survival, nutrition, health, transportation, agriculture, and the functioning of processes. Chemical-based products have to be designed/developed in order to meet these needs, while at the same time, they must be innovative and sustainable...... to these two topics are given. In addition, a generic computer-aided framework for the design of molecules, mixtures, and blends is presented. The application of the framework is highlighted for molecular products through two case studies involving the design of refrigerants and surfactants....

Energy-aware memory management for embedded multimedia systems a computer-aided design approach

CERN Document Server

Balasa, Florin

2011-01-01

Energy-Aware Memory Management for Embedded Multimedia Systems: A Computer-Aided Design Approach presents recent computer-aided design (CAD) ideas that address memory management tasks, particularly the optimization of energy consumption in the memory subsystem. It explains how to efficiently implement CAD solutions, including theoretical methods and novel algorithms. The book covers various energy-aware design techniques, including data-dependence analysis techniques, memory size estimation methods, extensions of mapping approaches, and memory banking approaches. It shows how these techniques

A Computer-Aided Diagnosis System for Breast Cancer Combining Digital Mammography and Genomics

Science.gov (United States)

2006-05-01

Huang, "Breast cancer diagnosis using self-organizing map for sonography." Ultrasound Med. Biol. 26, 405 (2000). 20 K. Horsch, M.L. Giger, L.A. Venta ...L.A. Venta , "Performance of computer-aided diagnosis in the interpretation of lesions on breast sonography." Acad Radiol 11, 272 (2004). 22 W. Chen...418. 27. Horsch K, Giger ML, Vyborny CJ, Venta LA. Performance of computer-aided diagnosis in the interpretation of lesions on breast sonography

An overview of interactive computer graphics and its application to computer-aided engineering and design

International Nuclear Information System (INIS)

Van Dam, A.

1983-01-01

The purpose of this brief birds-eye view of interactive graphics is to list the key ideas, and to show how one of the most important application areas, Computer Aided Engineering/Design takes advantage of it. (orig.)

Computer-aided diagnosis in routine mammography

International Nuclear Information System (INIS)

Sittek, H.; Perlet, C.; Helmberger, R.; Linsmeier, E.; Kessler, M.; Reiser, M.

1998-01-01

Purpose: Computer-aided diagnosis in mammography is a topic many study groups have been concerned with since the first presentation of a system for computer-aided interpretation in 1967. Currently, there is only one system avilable for clinical use in mammography, the CAD-System Image Checker (R2 Technology). The purpose of our prospective study was to evaluate whether the integration of the CAD-system into the routine of a radiological breast diagnosis unit is feasible. Results: After the installation of the CAD-system, 300 patients with 1110 mammograms were included for evaluation in the present study. In 54 of these cases histological examination was indicated due to suspect criteria on conventional mammography. In 39 of 54 cases (72,2%) malignancy could be proven histologically. The CAD-system marked 82,1% of the histologically verified carcinomas correctly 94,3% of all 1797 marks made by the CAD-system indicated normal or benign structures. Routinely performed CAD analysis prolonged patients waiting time by about 15 min because the marks of the CAD system had to be interpreted in addition to the routine diagnostic investigations. Conclusion: Our experience with the use of the CAD-system in daily routine showed that CAD analysis can easily be integrated into a preexisting mammography unit. However, the diagnostic benefit is not yet clearly established. Since the rate of false negative marks by the CAD-system Image Checker is still high, the results of CAD analysis must be checked and corrected by an observer well experienced in mammography reading. (orig.) [de

Computer-based expert system aids underground mine planning

Energy Technology Data Exchange (ETDEWEB)

Britton, S.G.

1987-04-01

Artificial intelligence (AI) systems have been rapidly expanded over the last few years to aid in the decision making processes in a whole range of industries, including the use of machines for operating in high risk/dangerous areas such as at the working faces in longwall mining. Using Prolog software a program for mine management is being developed called CHOOZ. This system can help managers identify staffing problems and change manpower shifts to cope with unexpected labor problems such as absenteeism and sickness. All the programs have been developed for the IBM PC microcomputer.

Computer-aided drug design at Boehringer Ingelheim

Science.gov (United States)

Muegge, Ingo; Bergner, Andreas; Kriegl, Jan M.

2017-03-01

Computer-Aided Drug Design (CADD) is an integral part of the drug discovery endeavor at Boehringer Ingelheim (BI). CADD contributes to the evaluation of new therapeutic concepts, identifies small molecule starting points for drug discovery, and develops strategies for optimizing hit and lead compounds. The CADD scientists at BI benefit from the global use and development of both software platforms and computational services. A number of computational techniques developed in-house have significantly changed the way early drug discovery is carried out at BI. In particular, virtual screening in vast chemical spaces, which can be accessed by combinatorial chemistry, has added a new option for the identification of hits in many projects. Recently, a new framework has been implemented allowing fast, interactive predictions of relevant on and off target endpoints and other optimization parameters. In addition to the introduction of this new framework at BI, CADD has been focusing on the enablement of medicinal chemists to independently perform an increasing amount of molecular modeling and design work. This is made possible through the deployment of MOE as a global modeling platform, allowing computational and medicinal chemists to freely share ideas and modeling results. Furthermore, a central communication layer called the computational chemistry framework provides broad access to predictive models and other computational services.

Computer-aided discovery of antimicrobial agents as potential enoyl ...

African Journals Online (AJOL)

Computer-aided discovery of antimicrobial agents as potential enoyl acyl carrier protein reductase inhibitors. ... Conclusion: Overall, the newly discovered hits can act as a good starting point in the future for the development of safe and potent antibacterial agents. Keywords: Enoyl acyl carrier protein reductase, saFabI, ...

Computer-Aided Chemical Product Design Framework: Design of High Performance and Environmentally Friendly Refrigerants

DEFF Research Database (Denmark)

Cignitti, Stefano; Zhang, Lei; Gani, Rafiqul

properties and needs should carefully be selected for a given heat pump cycle to ensure that an optimum refrigerant is found? How can cycle performance and environmental criteria be integrated at the product design stage and not in post-design analysis? Computer-aided product design methods enable...... the possibility of designing novel molecules, mixtures and blends, such as refrigerants through a systematic framework (Cignitti et al., 2015; Yunus et al., 2014). In this presentation a computer-aided framework is presented for chemical product design through mathematical optimization. Here, molecules, mixtures...... and blends, are systematically designed through a decomposition based solution method. Given a problem definition, computer-aided molecular design (CAMD) problem is defined, which is formulated into a mixed integer nonlinear program (MINLP). The decomposed solution method then sequentially divides the MINLP...

A Multi-step and Multi-level approach for Computer Aided Molecular Design

DEFF Research Database (Denmark)

. The problem formulation step incorporates a knowledge base for the identification and setup of the design criteria. Candidate compounds are identified using a multi-level generate and test CAMD solution algorithm capable of designing molecules having a high level of molecular detail. A post solution step...... using an Integrated Computer Aided System (ICAS) for result analysis and verification is included in the methodology. Keywords: CAMD, separation processes, knowledge base, molecular design, solvent selection, substitution, group contribution, property prediction, ICAS Introduction The use of Computer...... Aided Molecular Design (CAMD) for the identification of compounds having specific physic...

CASAD -- Computer-Aided Sonography of Abdominal Diseases - the concept of joint technique impact

Directory of Open Access Journals (Sweden)

T. Deserno

2010-03-01

Full Text Available Ultrasound image is the primary (input information for every ultrasonic examination. Since being used in ultrasound images analysis the both knowledge-base decision support and content-based image retrieval techniques have their own restrictions, the combination of these techniques looks promissory for covering the restrictions of one by advances of another. In this work we have focused on implementation of the proposed combination in the frame of CASAD (Computer-Aided Sonography of Abdominal Diseases system for supplying the ultrasound examiner with a diagnostic-assistant tool based on a data warehouse of standard referenced images. This warehouse serves: to manifest the diagnosis when the ecographist specifies the pathology and then looks through corresponding images to verify his opinion; to suggest a second opinion by automatic analysis of the annotation of relevant images that were assessed from the repository using content-based image retrieval.

The effects of computer-aided design software on engineering students' spatial visualisation skills

Science.gov (United States)

Kösa, Temel; Karakuş, Fatih

2018-03-01

The purpose of this study was to determine the influence of computer-aided design (CAD) software-based instruction on the spatial visualisation skills of freshman engineering students in a computer-aided engineering drawing course. A quasi-experimental design was applied, using the Purdue Spatial Visualization Test-Visualization of Rotations (PSVT:R) for both the pre- and the post-test. The participants were 116 freshman students in the first year of their undergraduate programme in the Department of Mechanical Engineering at a university in Turkey. A total of 72 students comprised the experimental group; they were instructed with CAD-based activities in an engineering drawing course. The control group consisted of 44 students who did not attend this course. The results of the study showed that a CAD-based engineering drawing course had a positive effect on developing engineering students' spatial visualisation skills. Additionally, the results of the study showed that spatial visualisation skills can be a predictor for success in a computer-aided engineering drawing course.

[Computer aided design for fixed partial denture framework based on reverse engineering technology].

Science.gov (United States)

Sun, Yu-chun; Lü, Pei-jun; Wang, Yong

2006-03-01

To explore a computer aided design (CAD) route for the framework of domestic fixed partial denture (FPD) and confirm the suitable method of 3-D CAD. The working area of a dentition model was scanned with a 3-D mechanical scanner. Using the reverse engineering (RE) software, margin and border curves were extracted and several reference curves were created to ensure the dimension and location of pontic framework that was taken from the standard database. The shoulder parts of the retainers were created after axial surfaces constructed. The connecting areas, axial line and curving surface of the framework connector were finally created. The framework of a three-unit FPD was designed with RE technology, which showed smooth surfaces and continuous contours. The design route is practical. The result of this study is significant in theory and practice, which will provide a reference for establishing the computer aided design/computer aided manufacture (CAD/CAM) system of domestic FPD.

SAMO [Sistema de Apoyo Mechanizado a la Operacion]: An operational aids computer system

International Nuclear Information System (INIS)

Stormer, T.D.; Laflor, E.V.

1989-01-01

SAMO (Sistema de Apoyo Mechanizado a la Operacion) is a sensor-driven, computer-based, graphic display system designed by Westinghouse to aid the A. N. Asco operations staff during all modes of plant operations, including emergencies. The SAMO system is being implemented in the A. N. Asco plant in two phases that coincide with consecutive refueling outages for each of two nuclear units at the Asco site. Phase 1 of the SAMO system implements the following functions: (1) emergency operational aids, (2) postaccident monitoring, (3) plant graphics display, (4) high-speed transient analysis recording, (5) historical data collection, storage, and retrieval, (6) sequence of events, and (7) posttrip review. During phase 2 of the SAMO project, the current plant computer will be removed and the functions now performed by the plant computer will be performed by the SAMO system. In addition, the following functions will be implemented: (1) normal and simple transients operational aid, (2) plant information graphics; and (3) real-time radiological off-site dose calculation

Applied decision analysis and risk evaluation

International Nuclear Information System (INIS)

Ferse, W.; Kruber, S.

1995-01-01

During 1994 the workgroup 'Applied Decision Analysis and Risk Evaluation; continued the work on the knowledge based decision support system XUMA-GEFA for the evaluation of the hazard potential of contaminated sites. Additionally a new research direction was started which aims at the support of a later stage of the treatment of contaminated sites: The clean-up decision. For the support of decisions arising at this stage, the methods of decision analysis will be used. Computational aids for evaluation and decision support were implemented and a case study at a waste disposal site in Saxony which turns out to be a danger for the surrounding groundwater ressource was initiated. (orig.)

Decision support systems and expert systems for risk and safety analysis

International Nuclear Information System (INIS)

Baybutt, P.

1986-01-01

During the last 1-2 years, rapid developments have occurred in the development of decision support systems and expert systems to aid in decision making related to risk and safety of industrial plants. These activities are most noteworthy in the nuclear industry where numerous systems are under development with implementation often being made on personal computers. An overview of some of these developments is provided, and an example of one recently developed decision support system is given. This example deals with CADET, a system developed to aid the U.S. Nuclear Regulatory Commission in making decisions related to the topical issue of source terms resulting from degraded core accidents in light water reactors. The paper concludes with some comments on the likely directions of future developments in decision support systems and expert systems to aid in the management of risk and safety in industrial plants. (author)

Computer-aided reduction of plasma data

International Nuclear Information System (INIS)

Shariati, S.

1984-01-01

Poor signal-to-noise ratios and the non-linear characteristics of the data obtained by most plasma diagnostic equipment makes computer-aided data handling a desirable feature in plasma laboratories. The Lecroy 3500-SA32 signal analyzer is used as the data handling system in this work. The performance of the Lecroy 3500-SA32 signal analyzer, used for recording and reducing the plasma data under the noisy environment of the laboratory, is reported. The data characteristics and software programs are discussed for three types of plasma diagnostic equipment: 1) Langmuir Probes; 2) Charge Exchange Neutral Energy Analyzers; 3) Retarding Potential Energy Analyzers. In order to protect the computer internal circuitry and to have satisfactory data acquisition and handling, methods for dealing with the noisy environment, including stray magnetic fields, RF radiation, and transient spikes on power lines, are also developed. Three computer programs are included which obtain an iterated best fit of experimental data to the corresponding analytical expressions for each case. The new data handling system enables the user to do a real-time analysis of data by using the interactive features of the Lecroy 3500-SA32 system

Computer-assisted decision aid for the estimation of mineral endowment: uranium in the San Juan Basin, New Mexico, a case study

International Nuclear Information System (INIS)

Carrigan, F.J.

1983-01-01

This methodology comprises two main sections, each executed on a different computer system. The first section, the Geologic Decision Model, has been computerized as an interactive PLATO program. Using the PLATO system, the geologist describes probabilistically the perceived states of geologic processes and conditions. The decision model analyzes this information and computes a probability distribution for mineral occurrence. The second section, the Endowment Simulation Model (program MASTER), is run on the DEC 10 and Cyber 175 computers. Program MASTER takes the product of the Geologic Decision Model, combines it with other data, and produces a probabilistic estimate of mineral endowment for the region being evaluated. Development and testing of the Arizona Appraisal System were carried out simultaneously over a period of about three years. During this period, four geologists from government and industry were called upon four or five times over a period of about a year for a study of the uranium (U 3 O 8 ) endowment in the San Juan Basin of northwestern New Mexico. The results produced by the system consist, for each geologist, of a probability distribution for tons of U 3 O 8 endowment for (1) each partition of each stratigraphic unit, (2) each stratigraphic unit as a whole, (3) ''formations'' or ''merged units'' (groups of stratigraphic units), and (4) the San Juan Basin as a whole (all stratigraphic units). The system also calculates the average distribution across all geologists for the various merged units and for the basin as a whole. The result for the basin as a whole (in thousands of tons) is: mean 3,855, variance 4,108 x 10 9 , and 95th percentile 6,541

Calculation of the number of branches of multi-valued decision trees in computer aided importance rank of parameters

Directory of Open Access Journals (Sweden)

Tiszbierek Agnieszka

2017-01-01

Full Text Available An elaborated digital computer programme supporting the time-consuming process of selecting the importance rank of construction and operation parameters by means of stating optimum sets is based on the Quine – McCluskey algorithm of minimizing individual partial multi-valued logic functions. The example with real time data, calculated by means of the programme, showed that among the obtained optimum sets there were such which had a different number of real branches after being presented on the multi-valued logic decision tree. That is why an idea of elaborating another functionality of the programme – a module calculating the number of branches of real, multi-valued logic decision trees presenting optimum sets chosen by the programme was pursued. This paper presents the idea and the method for developing a module calculating the number of branches, real for each of optimum sets indicated by the programme, as well as to the calculation process.

The computer aided education and training system for accident management

International Nuclear Information System (INIS)

Yoneyama, Mitsuru; Kubota, Ryuji; Fujiwara, Tadashi; Sakuma, Hitoshi

1999-01-01

The education and training system for Accident Management was developed by the Japanese BWR group and Hitachi Ltd. The education and training system is composed of two systems. One is computer aided instruction (CAI) education system and the education and training system with computer simulations. Both systems are designed to be executed on personal computers. The outlines of the CAI education system and the education and training system with simulator are reported below. These systems provides plant operators and technical support center staff with the effective education and training for accident management. (author)

CONTRIBUTIONS FOR DEVELOPING OF A COMPUTER AIDED LEARNING ENVIRONMENT OF DESCRIPTIVE GEOMETRY

Directory of Open Access Journals (Sweden)

Antonescu Ion

2009-07-01

Full Text Available The paper presents the authors’ contributions for developing a computer code for teaching of descriptive geometry using the computer aided learning techniques. The program was implemented using the programming interface and the 3D modeling capabilities of the AutoCAD system.

New design methods for computer aided architecturald design methodology teaching

NARCIS (Netherlands)

Achten, H.H.

2003-01-01

Architects and architectural students are exploring new ways of design using Computer Aided Architectural Design software. This exploration is seldom backed up from a design methodological viewpoint. In this paper, a design methodological framework for reflection on innovate design processes by

USE OF COMPUTER-AIDED PROCESS ENGINEERING TOOL IN POLLUTION PREVENTION

Science.gov (United States)

Computer-Aided Process Engineering has become established in industry as a design tool. With the establishment of the CAPE-OPEN software specifications for process simulation environments. CAPE-OPEN provides a set of "middleware" standards that enable software developers to acces...

Computer-Aided Model Based Analysis for Design and Operation of a Copolymerization Process

DEFF Research Database (Denmark)

Lopez-Arenas, Maria Teresa; Sales-Cruz, Alfonso Mauricio; Gani, Rafiqul

2006-01-01

. This will allow analysis of the process behaviour, contribute to a better understanding of the polymerization process, help to avoid unsafe conditions of operation, and to develop operational and optimizing control strategies. In this work, through a computer-aided modeling system ICAS-MoT, two first......The advances in computer science and computational algorithms for process modelling, process simulation, numerical methods and design/synthesis algorithms, makes it advantageous and helpful to employ computer-aided modelling systems and tools for integrated process analysis. This is illustrated......-principles models have been investigated with respect to design and operational issues for solution copolymerization reactors in general, and for the methyl methacrylate/vinyl acetate system in particular. The Model 1 is taken from literature and is commonly used for low conversion region, while the Model 2 has...

PACS-Based Computer-Aided Detection and Diagnosis

Science.gov (United States)

Huang, H. K. (Bernie); Liu, Brent J.; Le, Anh HongTu; Documet, Jorge

The ultimate goal of Picture Archiving and Communication System (PACS)-based Computer-Aided Detection and Diagnosis (CAD) is to integrate CAD results into daily clinical practice so that it becomes a second reader to aid the radiologist's diagnosis. Integration of CAD and Hospital Information System (HIS), Radiology Information System (RIS) or PACS requires certain basic ingredients from Health Level 7 (HL7) standard for textual data, Digital Imaging and Communications in Medicine (DICOM) standard for images, and Integrating the Healthcare Enterprise (IHE) workflow profiles in order to comply with the Health Insurance Portability and Accountability Act (HIPAA) requirements to be a healthcare information system. Among the DICOM standards and IHE workflow profiles, DICOM Structured Reporting (DICOM-SR); and IHE Key Image Note (KIN), Simple Image and Numeric Report (SINR) and Post-processing Work Flow (PWF) are utilized in CAD-HIS/RIS/PACS integration. These topics with examples are presented in this chapter.

Computer Aided Design and Analysis of Separation Processes with Electrolyte Systems

DEFF Research Database (Denmark)

A methodology for computer aided design and analysis of separation processes involving electrolyte systems is presented. The methodology consists of three main parts. The thermodynamic part "creates" the problem specific property model package, which is a collection of pure component and mixture...... property models. The design and analysis part generates process (flowsheet) alternatives, evaluates/analyses feasibility of separation and provides a visual operation path for the desired separation. The simulation part consists of a simulation/calculation engine that allows the screening and validation...... of process alternatives. For the simulation part, a general multi-purpose, multi-phase separation model has been developed and integrated to an existing computer aided system. Application of the design and analysis methodology is highlighted through two illustrative case studies....

Computer Aided Design and Analysis of Separation Processes with Electrolyte Systems

DEFF Research Database (Denmark)

Takano, Kiyoteru; Gani, Rafiqul; Kolar, P.

2000-01-01

A methodology for computer aided design and analysis of separation processes involving electrolyte systems is presented. The methodology consists of three main parts. The thermodynamic part 'creates' the problem specific property model package, which is a collection of pure component and mixture...... property models. The design and analysis part generates process (flowsheet) alternatives, evaluates/analyses feasibility of separation and provides a visual operation path for the desired separation. The simulation part consists of a simulation/calculation engine that allows the screening and validation...... of process alternatives. For the simulation part, a general multi-purpose, multi-phase separation model has been developed and integrated to an existing computer aided system. Application of the design and analysis methodology is highlighted through two illustrative case studies, (C) 2000 Elsevier Science...

Computer-aided design of the RF-cavity for a high-power S-band klystron

Science.gov (United States)

Kant, D.; Bandyopadhyay, A. K.; Pal, D.; Meena, R.; Nangru, S. C.; Joshi, L. M.

2012-08-01

This article describes the computer-aided design of the RF-cavity for a S-band klystron operating at 2856 MHz. State-of-the-art electromagnetic simulation tools SUPERFISH, CST Microwave studio, HFSS and MAGIC have been used for cavity design. After finalising the geometrical details of the cavity through simulation, it has been fabricated and characterised through cold testing. Detailed results of the computer-aided simulation and cold measurements are presented in this article.

Computer-Aided Numerical Inversion of Laplace Transform

Directory of Open Access Journals (Sweden)

Umesh Kumar

2000-01-01

Full Text Available This paper explores the technique for the computer aided numerical inversion of Laplace transform. The inversion technique is based on the properties of a family of three parameter exponential probability density functions. The only limitation in the technique is the word length of the computer being used. The Laplace transform has been used extensively in the frequency domain solution of linear, lumped time invariant networks but its application to the time domain has been limited, mainly because of the difficulty in finding the necessary poles and residues. The numerical inversion technique mentioned above does away with the poles and residues but uses precomputed numbers to find the time response. This technique is applicable to the solution of partially differentiable equations and certain classes of linear systems with time varying components.

Computer-aided method for recognition of proton track in nuclear emulsion

International Nuclear Information System (INIS)

Ruan Jinlu; Li Hongyun; Song Jiwen; Zhang Jianfu; Chen Liang; Zhang Zhongbing; Liu Jinliang

2014-01-01

In order to overcome the shortcomings of the manual method for proton-recoil track recognition in nuclear emulsions, a computer-aided track recognition method was studied. In this method, image sequences captured by a microscope system were processed through image convolution with composite filters, binarization by multi thresholds, track grains clustering and redundant grains removing to recognize the track grains in the image sequences. Then the proton-recoil tracks were reconstructed from the recognized track grains through track reconstruction. The proton-recoil tracks in the nuclear emulsion irradiated by the neutron beam at energy of 14.9 MeV were recognized by the computer-aided method. The results show that proton-recoil tracks reconstructed by this method consist well with those reconstructed by the manual method. This compute-raided track recognition method lays an important technical foundation of developments of a proton-recoil track automatic recognition system and applications of nuclear emulsions in pulsed neutron spectrum measurement. (authors)

Development of a decision aid for cardiopulmonary resuscitation and invasive mechanical ventilation in the intensive care unit employing user-centered design and a wiki platform for rapid prototyping.

Science.gov (United States)

Plaisance, Ariane; Witteman, Holly O; LeBlanc, Annie; Kryworuchko, Jennifer; Heyland, Daren Keith; Ebell, Mark H; Blair, Louisa; Tapp, Diane; Dupuis, Audrey; Lavoie-Bérard, Carole-Anne; McGinn, Carrie Anna; Légaré, France; Archambault, Patrick Michel

2018-01-01

Upon admission to an intensive care unit (ICU), all patients should discuss their goals of care and express their wishes concerning life-sustaining interventions (e.g., cardiopulmonary resuscitation (CPR)). Without such discussions, interventions that prolong life at the cost of decreasing its quality may be used without appropriate guidance from patients. To adapt an existing decision aid about CPR to create a wiki-based decision aid individually adapted to each patient's risk factors; and to document the use of a wiki platform for this purpose. We conducted three weeks of ethnographic observation in our ICU to observe intensivists and patients discussing goals of care and to identify their needs regarding decision making. We interviewed intensivists individually. Then we conducted three rounds of rapid prototyping involving 15 patients and 11 health professionals. We recorded and analyzed all discussions, interviews and comments, and collected sociodemographic data. Using a wiki, a website that allows multiple users to contribute or edit content, we adapted the decision aid accordingly and added the Good Outcome Following Attempted Resuscitation (GO-FAR) prediction rule calculator. We added discussion of invasive mechanical ventilation. The final decision aid comprises values clarification, risks and benefits of CPR and invasive mechanical ventilation, statistics about CPR, and a synthesis section. We added the GO-FAR prediction calculator as an online adjunct to the decision aid. Although three rounds of rapid prototyping simplified the information in the decision aid, 60% (n = 3/5) of the patients involved in the last cycle still did not understand its purpose. Wikis and user-centered design can be used to adapt decision aids to users' needs and local contexts. Our wiki platform allows other centers to adapt our tools, reducing duplication and accelerating scale-up. Physicians need training in shared decision making skills about goals of care and in using the

Development of a decision aid for cardiopulmonary resuscitation and invasive mechanical ventilation in the intensive care unit employing user-centered design and a wiki platform for rapid prototyping.

Directory of Open Access Journals (Sweden)

Ariane Plaisance

Full Text Available Upon admission to an intensive care unit (ICU, all patients should discuss their goals of care and express their wishes concerning life-sustaining interventions (e.g., cardiopulmonary resuscitation (CPR. Without such discussions, interventions that prolong life at the cost of decreasing its quality may be used without appropriate guidance from patients.To adapt an existing decision aid about CPR to create a wiki-based decision aid individually adapted to each patient's risk factors; and to document the use of a wiki platform for this purpose.We conducted three weeks of ethnographic observation in our ICU to observe intensivists and patients discussing goals of care and to identify their needs regarding decision making. We interviewed intensivists individually. Then we conducted three rounds of rapid prototyping involving 15 patients and 11 health professionals. We recorded and analyzed all discussions, interviews and comments, and collected sociodemographic data. Using a wiki, a website that allows multiple users to contribute or edit content, we adapted the decision aid accordingly and added the Good Outcome Following Attempted Resuscitation (GO-FAR prediction rule calculator.We added discussion of invasive mechanical ventilation. The final decision aid comprises values clarification, risks and benefits of CPR and invasive mechanical ventilation, statistics about CPR, and a synthesis section. We added the GO-FAR prediction calculator as an online adjunct to the decision aid. Although three rounds of rapid prototyping simplified the information in the decision aid, 60% (n = 3/5 of the patients involved in the last cycle still did not understand its purpose.Wikis and user-centered design can be used to adapt decision aids to users' needs and local contexts. Our wiki platform allows other centers to adapt our tools, reducing duplication and accelerating scale-up. Physicians need training in shared decision making skills about goals of care and in

Computer-aided modelling template: Concept and application

DEFF Research Database (Denmark)

Fedorova, Marina; Sin, Gürkan; Gani, Rafiqul

2015-01-01

decomposition technique which identifies generic steps and workflow involved, the computer-aided template concept has been developed. This concept is implemented as a software tool, which provides a user-friendly interface for following the workflow steps and guidance through the steps providing additional......Modelling is an important enabling technology in modern chemical engineering applications. A template-based approach is presented in this work to facilitate the construction and documentation of the models and enable their maintenance for reuse in a wider application range. Based on a model...

Computer Aided Methodology for Simultaneous Synthesis, Design & Analysis of Chemical Products-Processes

DEFF Research Database (Denmark)

d'Anterroches, Loïc; Gani, Rafiqul

2006-01-01

A new combined methodology for computer aided molecular design and process flowsheet design is presented. The methodology is based on the group contribution approach for prediction of molecular properties and design of molecules. Using the same principles, process groups have been developed...... a wide range of problems. In this paper, only the computer aided flowsheet design related features are presented....... together with their corresponding flowsheet property models. To represent the process flowsheets in the same way as molecules, a unique but simple notation system has been developed. The methodology has been converted into a prototype software, which has been tested with several case studies covering...

HINT for Squint: A Computer Reliant Diagnostic Aid for Strabismus

OpenAIRE

Gieszl, Louis R.; Morris, Jacqueline; Guyton, David L.

1983-01-01

This paper provides an outline of methods used for the implementation of a computer reliant diagnostic aid in the medical specialty of Ophthalmology. Some problems have been associated with many previous diagnostic models. A careful review indicates that the most serious problems were:

Computer-Aided Test Flow in Core-Based Design

OpenAIRE

Zivkovic, V.; Tangelder, R.J.W.T.; Kerkhoff, Hans G.

2000-01-01

This paper copes with the test-pattern generation and fault coverage determination in the core based design. The basic core-test strategy that one has to apply in the core-based design is stated in this work. A Computer-Aided Test (CAT) flow is proposed resulting in accurate fault coverage of embedded cores. The CAT now is applied to a few cores within the Philips Core Test Pilot IC project

An Integrated Computer-Aided Approach for Environmental Studies

DEFF Research Database (Denmark)

Gani, Rafiqul; Chen, Fei; Jaksland, Cecilia

1997-01-01

A general framework for an integrated computer-aided approach to solve process design, control, and environmental problems simultaneously is presented. Physicochemical properties and their relationships to the molecular structure play an important role in the proposed integrated approach. The sco...... and applicability of the integrated approach is highlighted through examples involving estimation of properties and environmental pollution prevention. The importance of mixture effects on some environmentally important properties is also demonstrated....

Computer-Aided Diagnosis for Breast Ultrasound Using Computerized BI-RADS Features and Machine Learning Methods.

Science.gov (United States)

Shan, Juan; Alam, S Kaisar; Garra, Brian; Zhang, Yingtao; Ahmed, Tahira

2016-04-01

This work identifies effective computable features from the Breast Imaging Reporting and Data System (BI-RADS), to develop a computer-aided diagnosis (CAD) system for breast ultrasound. Computerized features corresponding to ultrasound BI-RADs categories were designed and tested using a database of 283 pathology-proven benign and malignant lesions. Features were selected based on classification performance using a "bottom-up" approach for different machine learning methods, including decision tree, artificial neural network, random forest and support vector machine. Using 10-fold cross-validation on the database of 283 cases, the highest area under the receiver operating characteristic (ROC) curve (AUC) was 0.84 from a support vector machine with 77.7% overall accuracy; the highest overall accuracy, 78.5%, was from a random forest with the AUC 0.83. Lesion margin and orientation were optimum features common to all of the different machine learning methods. These features can be used in CAD systems to help distinguish benign from worrisome lesions. Copyright © 2016 World Federation for Ultrasound in Medicine & Biology. All rights reserved.

Computer-aided auscultation learning system for nursing technique instruction.

Science.gov (United States)

Hou, Chun-Ju; Chen, Yen-Ting; Hu, Ling-Chen; Chuang, Chih-Chieh; Chiu, Yu-Hsien; Tsai, Ming-Shih

2008-01-01

Pulmonary auscultation is a physical assessment skill learned by nursing students for examining the respiratory system. Generally, a sound simulator equipped mannequin is used to group teach auscultation techniques via classroom demonstration. However, nursing students cannot readily duplicate this learning environment for self-study. The advancement of electronic and digital signal processing technologies facilitates simulating this learning environment. This study aims to develop a computer-aided auscultation learning system for assisting teachers and nursing students in auscultation teaching and learning. This system provides teachers with signal recording and processing of lung sounds and immediate playback of lung sounds for students. A graphical user interface allows teachers to control the measuring device, draw lung sound waveforms, highlight lung sound segments of interest, and include descriptive text. Effects on learning lung sound auscultation were evaluated for verifying the feasibility of the system. Fifteen nursing students voluntarily participated in the repeated experiment. The results of a paired t test showed that auscultative abilities of the students were significantly improved by using the computer-aided auscultation learning system.

Computer-aided navigation in dental implantology: 7 years of clinical experience.

Science.gov (United States)

Ewers, Rolf; Schicho, Kurt; Truppe, Michael; Seemann, Rudolf; Reichwein, Astrid; Figl, Michael; Wagner, Arne

2004-03-01

This long-term study gives a review over 7 years of research, development, and routine clinical application of computer-aided navigation technology in dental implantology. Benefits and disadvantages of up-to-date technologies are discussed. In the course of the current advancement, various hardware and software configurations are used. In the initial phase, universally applicable navigation software is adapted for implantology. Since 2001, a special software module for dental implantology is available. Preoperative planning is performed on the basis of prosthetic aspects and requirements. In clinical routine use, patient and drill positions are intraoperatively registered by means of optoelectronic tracking systems; during preclinical tests, electromagnetic trackers are also used. In 7 years (1995 to 2002), 55 patients with 327 dental implants were successfully positioned with computer-aided navigation technology. The mean number of implants per patient was 6 (minimum, 1; maximum, 11). No complications were observed; the preoperative planning could be exactly realized. The average expenditure of time for the preparation of a surgical intervention with navigation decreased from 2 to 3 days in the initial phase to one-half day in clinical routine use with software that is optimized for dental implantology. The use of computer-aided navigation technology can contribute to considerable quality improvement. Preoperative planning is exactly realized and intraoperative safety is increased, because damage to nerves or neighboring teeth can be avoided.

Abdominal Computed tomography of 25 patients with AIDS or lymphadenopathy Syndrome

International Nuclear Information System (INIS)

Arrive, L.; Frija, J.; Couderc, L.J.; Clauvel, J.P.; Laval-Jeantet, M.; Matheron, S.

1986-01-01

An abdominal computed tomographic examination was performed to 20 patients with Acquired Immunodeficiency Syndrome (AIDS) and to 5 patients with Lymphadenopathy Syndrome (LAS). Intraabdominal lymph nodes were seen in 18 out of 20 cases of AIDS and in 5 cases of LAS. Lymph nodes have a normal size or are slightly enlarged but they are too numerous. Splenomegaly was found in 17 patients. Rectal modifications secondary to a proctitis were seen in the homosexual patients [fr

A study of a Dutch online decision aid for parents of children with ADHD

NARCIS (Netherlands)

Ossebaard, Hans Cornelis; van Gemert-Pijnen, Julia E.W.C.; Sorbi, Marjolijn J.; Seydel, E.R.

2010-01-01

During a three-month study period, visitors to an online decision aid (DA) for attention deficit hyperactivity disorder (ADHD) were invited to complete an online questionnaire before and after working through the DA. Some 75,000 unique visitors found their way to the page on DAs, although fewer than

Analysis of three-phase power-supply systems using computer-aided design programs

International Nuclear Information System (INIS)

Oberst, E.F.

1977-01-01

A major concern of every designer of large, three-phase power-supply systems is the protection of system components from overvoltage transients. At present, three computer-aided circuit design programs are available in the Magnetic Fusion Energy (MFE) National Computer Center that can be used to analyze three-phase power systems: MINI SCEPTRE, SPICE I, and SPICE II. These programs have been used at Lawrence Livermore Laboratory (LLL) to analyze the operation of a 200-kV dc, 20-A acceleration power supply for the High Voltage Test Stand. Various overvoltage conditions are simulated and the effectiveness of system protective devices is observed. The simulated overvoltage conditions include such things as circuit breaker openings, pulsed loading, and commutation voltage surges in the rectifiers. These examples are used to illustrate the use of the computer-aided, circuit-design programs discussed in this paper

Computer Aided Education System SuperTest. Present and Prospective

Directory of Open Access Journals (Sweden)

2007-01-01

Full Text Available This paper analyzes the testing and self-testing process for the Computer Aided Education System (CAES SuperTest, used at the Academy of Economic Studies of Chisinau, Moldova and recently implemented at the University of Bacau, Romania. We discuss here the future of this software, from the Information Society and Knowledge Society point of view.

The effect of offering different numbers of colorectal cancer screening test options in a decision aid: a pilot randomized trial

Directory of Open Access Journals (Sweden)

Brenner Alison RT

2008-01-01

Full Text Available Abstract Background Decision aids can improve decision making processes, but the amount and type of information that they should attempt to communicate is controversial. We sought to compare, in a pilot randomized trial, two colorectal cancer (CRC screening decision aids that differed in the number of screening options presented. Methods Adults ages 48–75 not currently up to date with screening were recruited from the community and randomized to view one of two versions of our previously tested CRC screening decision aid. The first version included five screening options: fecal occult blood test (FOBT, sigmoidoscopy, a combination of FOBT and sigmoidoscopy, colonoscopy, and barium enema. The second discussed only the two most frequently selected screening options, FOBT and colonoscopy. Main outcomes were differences in screening interest and test preferences between groups after decision aid viewing. Patient test preference was elicited first without any associated out-of-pocket costs (OPC, and then with the following costs: FOBT-$10, sigmoidoscopy-$50, barium enema-$50, and colonoscopy-$200. Results 62 adults participated: 25 viewed the 5-option decision aid, and 37 viewed the 2-option version. Mean age was 54 (range 48–72, 58% were women, 71% were White, 24% African-American; 58% had completed at least a 4-year college degree. Comparing participants that viewed the 5-option version with participants who viewed the 2-option version, there were no differences in screening interest after viewing (1.8 vs. 1.9, t-test p = 0.76. Those viewing the 2-option version were somewhat more likely to choose colonoscopy than those viewing the 5-option version when no out of pocket costs were assumed (68% vs. 46%, p = 0.11, but not when such costs were imposed (41% vs. 42%, p = 1.00. Conclusion The number of screening options available does not appear to have a large effect on interest in colorectal cancer screening. The effect of offering differing

A Novel Computer-Aided Design/Computer-Assisted Manufacture Method for One-Piece Removable Partial Denture and Evaluation of Fit.

Science.gov (United States)

Ye, Hongqiang; Li, Xinxin; Wang, Guanbo; Kang, Jing; Liu, Yushu; Sun, Yuchun; Zhou, Yongsheng

2018-02-15

To investigate a computer-aided design/computer-aided manufacturing (CAD/CAM) process for producing one-piece removable partial dentures (RPDs) and to evaluate their fits in vitro. A total of 15 one-piece RPDs were designed using dental CAD and reverse engineering software and then fabricated with polyetheretherketone (PEEK) using CAM. The gaps between RPDs and casts were measured and compared with traditional cast framework RPDs. Gaps were lower for one-piece PEEK RPDs compared to traditional RPDs. One-piece RPDs can be manufactured by CAD/CAM, and their fits were better than those of traditional RPDs.

Application of the Consumer Decision-Making Model to Hearing Aid Adoption in First-Time Users.

Science.gov (United States)

Amlani, Amyn M

2016-05-01

Since 1980, hearing aid adoption rates have remained essentially the same, increasing at a rate equal to the organic growth of the population. Researchers have used theoretical models from psychology and sociology to determine those factors or constructs that lead to the adoption of hearing aids by first-time impaired listeners entering the market. In this article, a theoretical model, the Consumer Decision-Making Model (CDM), premised on the neobehavioral approach that considers an individual's psychological and cognitive emphasis toward a product or service, is described. Three theoretical models (i.e., transtheoretical, social model of disability, Health Belief Model), and their relevant findings to the hearing aid market, are initially described. The CDM is then presented, along with supporting evidence of the model's various factors from the hearing aid literature. Future applications of the CDM to hearing health care also are discussed.

Usability evaluation and adaptation of the e-health Personal Patient Profile-Prostate decision aid for Spanish-speaking Latino men.

Science.gov (United States)

Berry, Donna L; Halpenny, Barbara; Bosco, Jaclyn L F; Bruyere, John; Sanda, Martin G

2015-07-24

The Personal Patient Profile-Prostate (P3P), a web-based decision aid, was demonstrated to reduce decisional conflict in English-speaking men with localized prostate cancer early after initial diagnosis. The purpose of this study was to explore and enhance usability and cultural appropriateness of a Spanish P3P by Latino men with a diagnosis of prostate cancer. P3P was translated to Spanish and back-translated by three native Spanish-speaking translators working independently. Spanish-speaking Latino men with a diagnosis of localized prostate cancer, who had made treatment decisions in the past 24 months, were recruited from two urban clinical care sites. Individual cognitive interviews were conducted by two bilingual research assistants as each participant used the Spanish P3P. Notes of user behavior, feedback, and answers to direct questions about comprehension, usability and perceived usefulness were analyzed and categorized. Seven participants with a range of education levels identified 25 unique usability issues in navigation, content comprehension and completeness, sociocultural appropriateness, and methodology. Revisions were prioritized to refine the usability and cultural and linguistic appropriateness of the decision aid. Usability issues were discovered that are potential barriers to effective decision support. Successful use of decision aids requires adaptation and testing beyond translation. Our findings led to revisions further refining the usability and linguistic and cultural appropriateness of Spanish P3P.

Evaluation of computer aided volumetry for simulated small pulmonary nodules on computed tomography

International Nuclear Information System (INIS)

Do, Kyung Hyun; Goo, Jin Mo; Lee, Kyung Won; Im, Jung Gi; Chung, Myung Jin

2004-01-01

To determine the accuracy of automated computer aided volumetry for simulated small pulmonary nodules at computed tomography using various types of phantoms Three sets of synthetic nodules (small, calcified and those adjacent to vessels) were studied. The volume of the nodules in each set was already known, and using multi-slice CT, volumetric data for each nodule was acquired from the three-dimensional reconstructed image. The volume was calculated by applying three different threshold values using Rapidia software (3D-Med, Seoul, Korea). Relative errors in the measured volume of synthetic pulmonary nodules were 17.3, 2.9, and 11.5% at -200, -400, and -600 HU, respectively, and there was good correlation between true volume and measured volume at -400 HU (r=0.96, p<0.001). For calcified nodules, relative errors in measured volume were 10.9, 5.3, and 16.5% at -200, -400, and -600 HU, respectively, and there was good correlation between true volume and measured volume at -400 HU (r=1.03, p<0.001). In cases involving synthetic nodules adjacent to vessels, relative errors were 4.6, 16.3, and 31.2% at -200, -400, and -600 HU, respectively. There was good correlation between true volume and measured volume at -200 HU (r=1.1, p<0.001). Using computer-aided volumetry, the measured volumes of synthetic nodules correlated closely with their true volume. Measured volumes were the same at each threshold level, regardless of window setting

Evaluation of computer aided volumetry for simulated small pulmonary nodules on computed tomography

International Nuclear Information System (INIS)

Goo, Jin Mo; Lee, Kyung Won; Im, Jung Gi; Do, Kyung Hyun; Chung, Myung Jin

2004-01-01

To determine the accuracy of automated computer aided volumetry for simulated small pulmonary nodules at computed tomography using various types of phantoms. Three sets of synthetic nodules (small, calcified and those adjacent to vessels) were studied. The volume of the nodules in each set was already known, and using multi-slice CT, volumetric data for each nodule was acquired from the three-dimensional reconstructed image. The volume was calculated by applying three different threshold values using Rapidia software (3D-Med, Seoul, Korea). Relative errors in the measured volume of synthetic pulmonary nodules were 17.3, 2.9, and 11.5% at -200, -400, and --600 HU, respectively, and there was good correlation between true volume and measured volume at -400 HU (r=0.96, p<0.001). For calcified nodules, relative errors in measured volume were 10.9, 5.3, and 16.5% at -200, -400, and -600 HU, respectively, and there was good correlation between true volume and measured volume at -400 HU (r=1.03, p<0.001). In cases involving synthetic nodules adjacent to vessels, relative errors were 4.6, 16.3, and 31.2 % at -200, -400, and -600 HU, respectively. There was good correlation between true volume and measured volume at -200 HU (r=1.1, p<0.001). Using computer-aided volumetry, the measured volumes of synthetic nodules correlated closely with their true volume. Measured volumes were the same at each threshold level, regardless of window setting

Developing Decision-Making Skill: Experiential Learning in Computer Games

OpenAIRE

Kurt A. April; Katja M. J. Goebel; Eddie Blass; Jonathan Foster-Pedley

2012-01-01

This paper explores the value that computer and video games bring to learning and leadership and explores how games work as learning environments and the impact they have on personal development. The study looks at decisiveness, decision-making ability and styles, and on how this leadership-related skill is learnt through different paradigms. The paper compares the learning from a lecture to the learning from a designed computer game, both of which have the same content through the use of a s...

Computer aided systems human engineering: A hypermedia tool

Science.gov (United States)

Boff, Kenneth R.; Monk, Donald L.; Cody, William J.

1992-01-01

The Computer Aided Systems Human Engineering (CASHE) system, Version 1.0, is a multimedia ergonomics database on CD-ROM for the Apple Macintosh II computer, being developed for use by human system designers, educators, and researchers. It will initially be available on CD-ROM and will allow users to access ergonomics data and models stored electronically as text, graphics, and audio. The CASHE CD-ROM, Version 1.0 will contain the Boff and Lincoln (1988) Engineering Data Compendium, MIL-STD-1472D and a unique, interactive simulation capability, the Perception and Performance Prototyper. Its features also include a specialized data retrieval, scaling, and analysis capability and the state of the art in information retrieval, browsing, and navigation.

Computer-Aided Grading of Lymphangioleiomyomatosis (LAM) using HRCT

Science.gov (United States)

Yao, Jianhua; Avila, Nilo; Dwyer, Andrew; Taveira-DaSilva, Angelo M.; Hathaway, Olanda M.; Moss, Joel

2010-01-01

Lymphangioleiomyomatosis (LAM) is a multisystem disorder associated with proliferation of smooth muscle-like cells, which leads to destruction of lung parenchyma. Subjective grading of LAM on HRCT is imprecise and can be arduous especially in cases with severe involvement. We propose a computer-aided evaluation system that grades LAM involvement based on analysis of lung texture patterns. A committee of support vector machines is employed for classification. The system was tested on 36 patients. The computer grade demonstrates good correlation with subjective radiologist grade (R=0.91, p<0.0001) and pulmonary functional tests (R=0.85, p<0.0001). The grade also provides precise progression assessment of disease over time. PMID:21625320

Present state of computer-aided diagnosis (CAD) development

International Nuclear Information System (INIS)

Fujita, Hiroshi

2007-01-01

Topics of computer-aided detection (CAD) are reviewed. Commercially available, Food and Drug Administration (FDA)-approved CAD systems are for fields of breast cancer (mammography), chest (flat X-ray and CT imaging) and colon (polyp detection). In Japan, only mammography CAD is approved. Efficacy of CAD is controversial, for which reliable database is important, and its construction is under development in various medical fields. Digitalized image is now popularized, which conceivably leads to improve the cost-effectiveness of diagnosis with CAD. For incentive, approval for health insurance would be the case as seen in the increased CAD sale by R2 Technology Co., and MHLW actually assists facilities to introduce the reading-aid system of mammography by sharing a half of its cost. There are 2 big projects for CAD study supported by MECSST, which the author concerns. One is the development of diagnostic aid for the multi-dimensional medical images where the multi-organ, multi-disease CAD system is considered. The other involves the CAD in brain MRI, in breast US and in eyeground picture. It is not in so far future for patients and doctors to fully enjoy the benefit of CAD. (R.T.)

A computer-aided continuous assessment system

Directory of Open Access Journals (Sweden)

B. C.H. Turton

1996-12-01

Full Text Available Universities within the United Kingdom have had to cope with a massive expansion in undergraduate student numbers over the last five years (Committee of Scottish University Principals, 1993; CVCP Briefing Note, 1994. In addition, there has been a move towards modularization and a closer monitoring of a student's progress throughout the year. Since the price/performance ratio of computer systems has continued to improve, Computer- Assisted Learning (CAL has become an attractive option. (Fry, 1990; Benford et al, 1994; Laurillard et al, 1994. To this end, the Universities Funding Council (UFQ has funded the Teaching and Learning Technology Programme (TLTP. However universities also have a duty to assess as well as to teach. This paper describes a Computer-Aided Assessment (CAA system capable of assisting in grading students and providing feedback. In this particular case, a continuously assessed course (Low-Level Languages of over 100 students is considered. Typically, three man-days are required to mark one assessed piece of coursework from the students in this class. Any feedback on how the questions were dealt with by the student are of necessity brief. Most of the feedback is provided in a tutorial session that covers the pitfalls encountered by the majority of the students.

Radiological aspects of nuclear accident scenarios. Volume 2 the Rade-Aid system post-Chernobyl action

International Nuclear Information System (INIS)

Sinnaeve, J.

1991-01-01

In the event of a nuclear accident, there is a need for a rapid assessment of the resulting levels of environmental contamination in order to facilitate decisions on possible countermeasures. Volume 2 describes the RADE-AID project to develop a computer system which can be used to support the formulation of decisions on countermeasures following an accidental release of radionuclides. The system is intended as an aid following an actual accident and a tool for assistance in planning and training

CADRIGS--computer aided design reliability interactive graphics system

International Nuclear Information System (INIS)

Kwik, R.J.; Polizzi, L.M.; Sticco, S.; Gerrard, P.B.; Yeater, M.L.; Hockenbury, R.W.; Phillips, M.A.

1982-01-01