Computer programs for capital cost estimation, lifetime economic performance simulation, and computation of cost indexes for laser fusion and other advanced technology facilities

International Nuclear Information System (INIS)

Pendergrass, J.H.

1978-01-01

Three FORTRAN programs, CAPITAL, VENTURE, and INDEXER, have been developed to automate computations used in assessing the economic viability of proposed or conceptual laser fusion and other advanced-technology facilities, as well as conventional projects. The types of calculations performed by these programs are, respectively, capital cost estimation, lifetime economic performance simulation, and computation of cost indexes. The codes permit these three topics to be addressed with considerable sophistication commensurate with user requirements and available data

Cost-effectiveness analysis of computer-based assessment

Directory of Open Access Journals (Sweden)

Pauline Loewenberger

2003-12-01

Full Text Available The need for more cost-effective and pedagogically acceptable combinations of teaching and learning methods to sustain increasing student numbers means that the use of innovative methods, using technology, is accelerating. There is an expectation that economies of scale might provide greater cost-effectiveness whilst also enhancing student learning. The difficulties and complexities of these expectations are considered in this paper, which explores the challenges faced by those wishing to evaluate the costeffectiveness of computer-based assessment (CBA. The paper outlines the outcomes of a survey which attempted to gather information about the costs and benefits of CBA.

Computed tomography versus intravenous urography in diagnosis of acute flank pain from urolithiasis: a randomized study comparing imaging costs and radiation dose

International Nuclear Information System (INIS)

Thomson, J.M.Z.; Maling, T.M.J.; Glocer, J.; Mark, S.; Abbott, C.

2001-01-01

The equivalent sensitivity of non-contrast computed tomography (NCCT) and intravenous urography (IVU) in the diagnosis of suspected ureteric colic has been established. Approximately 50% of patients with suspected ureteric colic do not have a nephro-urological cause for pain. Because many such patients require further imaging studies, NCCT may obviate the need for these studies and, in so doing, be more cost effective and involve less overall radiation exposure. The present study compares the total imaging cost and radiation dose of NCCT versus IVU in the diagnosis of acute flank pain. Two hundred and twenty-four patients (157 men; mean age 45 years; age range 19-79 years) with suspected renal colic were randomized either to NCCT or IVU. The number of additional diagnostic imaging studies, cost (IVU A$ 136; CTU A$ 173), radiation exposure and imaging times were compared. Of 119(53%) patients with renal obstruction, 105 had no nephro-urological causes of pain. For 21 (20%) of these patients an alternative diagnosis was made at the initial imaging, 10 of which were significant. Of 118 IVU patients, 28 (24%) required 32 additional imaging tests to reach a diagnosis, whereas seven of 106 (6%) NCCT patients required seven additional imaging studies. The average total diagnostic imaging cost for the NCCT group was A$181.94 and A$175.46 for the IVU group (P< 0.43). Mean radiation dose to diagnosis was 5.00 mSv (NCCT) versus 3.50 mSv (IVU) (P < 0.001). Mean imaging time was 30 min (NCCT) versus 75 min (IVU) (P < 0.001). Diagnostic imaging costs were remarkably similar. Although NCCT involves a higher radiation dose than IVU, its advantages of faster diagnosis, the avoidance of additional diagnostic imaging tests and its ability to diagnose other causes makes it the study of choice for acute flank pain at Christchurch Hospital. Copyright (2001) Blackwell Science Pty Ltd

Computer Software for Life Cycle Cost.

Science.gov (United States)

1987-04-01

34 111. 1111I .25 IL4 jj 16 MICROCOPY RESOLUTION TEST CHART hut FILE C AIR CoMMNAMN STFF COLLG STUJDET PORTO i COMpUTER SOFTWARE FOR LIFE CYCLE CO879...obsolete), physical life (utility before physically wearing out), or application life (utility in a given function)." (7:5) The costs are usually

A time and imaging cost analysis of low-risk ED observation patients: a conservative 64-section computed tomography coronary angiography "triple rule-out" compared to nuclear stress test strategy.

Science.gov (United States)

Takakuwa, Kevin M; Halpern, Ethan J; Shofer, Frances S

2011-02-01

The study aimed to examine time and imaging costs of 2 different imaging strategies for low-risk emergency department (ED) observation patients with acute chest pain or symptoms suggestive of acute coronary syndrome. We compared a "triple rule-out" (TRO) 64-section multidetector computed tomography protocol with nuclear stress testing. This was a prospective observational cohort study of consecutive ED patients who were enrolled in our chest pain observation protocol during a 16-month period. Our standard observation protocol included a minimum of 2 sets of cardiac enzymes at least 6 hours apart followed by a nuclear stress test. Once a week, observation patients were offered a TRO (to evaluate for coronary artery disease, thoracic dissection, and pulmonary embolus) multidetector computed tomography with the option of further stress testing for those patients found to have evidence of coronary artery disease. We analyzed 832 consecutive observation patients including 214 patients who underwent the TRO protocol. Mean total length of stay was 16.1 hours for TRO patients, 16.3 hours for TRO plus other imaging test, 22.6 hours for nuclear stress testing, 23.3 hours for nuclear stress testing plus other imaging tests, and 23.7 hours for nuclear stress testing plus TRO (P < .0001 for TRO and TRO + other test compared to stress test ± other test). Mean imaging times were 3.6, 4.4, 5.9, 7.5, and 6.6 hours, respectively (P < .05 for TRO and TRO + other test compared to stress test ± other test). Mean imaging costs were $1307 for TRO patients vs $945 for nuclear stress testing. Triple rule-out reduced total length of stay and imaging time but incurred higher imaging costs. A per-hospital analysis would be needed to determine if patient time savings justify the higher imaging costs. Copyright © 2011 Elsevier Inc. All rights reserved.

An approximate fractional Gaussian noise model with computational cost

KAUST Repository

Sørbye, Sigrunn H.

2017-09-18

Fractional Gaussian noise (fGn) is a stationary time series model with long memory properties applied in various fields like econometrics, hydrology and climatology. The computational cost in fitting an fGn model of length $n$ using a likelihood-based approach is ${\\\\mathcal O}(n^{2})$, exploiting the Toeplitz structure of the covariance matrix. In most realistic cases, we do not observe the fGn process directly but only through indirect Gaussian observations, so the Toeplitz structure is easily lost and the computational cost increases to ${\\\\mathcal O}(n^{3})$. This paper presents an approximate fGn model of ${\\\\mathcal O}(n)$ computational cost, both with direct or indirect Gaussian observations, with or without conditioning. This is achieved by approximating fGn with a weighted sum of independent first-order autoregressive processes, fitting the parameters of the approximation to match the autocorrelation function of the fGn model. The resulting approximation is stationary despite being Markov and gives a remarkably accurate fit using only four components. The performance of the approximate fGn model is demonstrated in simulations and two real data examples.

Cost-Benefit Analysis of Computer Resources for Machine Learning

Science.gov (United States)

Champion, Richard A.

2007-01-01

Machine learning describes pattern-recognition algorithms - in this case, probabilistic neural networks (PNNs). These can be computationally intensive, in part because of the nonlinear optimizer, a numerical process that calibrates the PNN by minimizing a sum of squared errors. This report suggests efficiencies that are expressed as cost and benefit. The cost is computer time needed to calibrate the PNN, and the benefit is goodness-of-fit, how well the PNN learns the pattern in the data. There may be a point of diminishing returns where a further expenditure of computer resources does not produce additional benefits. Sampling is suggested as a cost-reduction strategy. One consideration is how many points to select for calibration and another is the geometric distribution of the points. The data points may be nonuniformly distributed across space, so that sampling at some locations provides additional benefit while sampling at other locations does not. A stratified sampling strategy can be designed to select more points in regions where they reduce the calibration error and fewer points in regions where they do not. Goodness-of-fit tests ensure that the sampling does not introduce bias. This approach is illustrated by statistical experiments for computing correlations between measures of roadless area and population density for the San Francisco Bay Area. The alternative to training efficiencies is to rely on high-performance computer systems. These may require specialized programming and algorithms that are optimized for parallel performance.

THE COST OF PRODUCTION UNDER DIRECT COSTING AND ABSORPTION COSTING – A COMPARATIVE APPROACH

Directory of Open Access Journals (Sweden)

Bunea-Bontaş Cristina Aurora

2013-04-01

Full Text Available Managerial accounting has an important role in strategic management of a company, being designed especially for managers, in order to optimise their decision regarding operating activities. One of the objectives of managerial accounting is the cost calculation, for measuring inventory costs, and the costs and profitability of products and services. Cost calculation systems can vary in terms of which costs are assigned to cost objects, two significant calculation systems being adopted by the costing theory: full cost accounting, which includes all costs of production as product costs, and partial cost accounting, which includes only those costs that vary with output. This article provides a comparative approach regarding the differences between the calculation of the cost of production under direct costing and absorption costing. It also examines the implication of using each of these calculation systems on the financial position and financial performance of the companies reported on the statement of financial position and the income statement. Finally, the advantages of using direct costing for internal reporting are discussed, considering that this method is not acceptable for external reporting to stockholders and other external users.

The Hidden Cost of Buying a Computer.

Science.gov (United States)

Johnson, Michael

1983-01-01

In order to process data in a computer, application software must be either developed or purchased. Costs for modifications of the software package and maintenance are often hidden. The decision to buy or develop software packages should be based upon factors of time and maintenance. (MLF)

Computational cost for detecting inspiralling binaries using a network of laser interferometric detectors

International Nuclear Information System (INIS)

Pai, Archana; Bose, Sukanta; Dhurandhar, Sanjeev

2002-01-01

We extend a coherent network data-analysis strategy developed earlier for detecting Newtonian waveforms to the case of post-Newtonian (PN) waveforms. Since the PN waveform depends on the individual masses of the inspiralling binary, the parameter-space dimension increases by one from that of the Newtonian case. We obtain the number of templates and estimate the computational costs for PN waveforms: for a lower mass limit of 1M o-dot , for LIGO-I noise and with 3% maximum mismatch, the online computational speed requirement for single detector is a few Gflops; for a two-detector network it is hundreds of Gflops and for a three-detector network it is tens of Tflops. Apart from idealistic networks, we obtain results for realistic networks comprising of LIGO and VIRGO. Finally, we compare costs incurred in a coincidence detection strategy with those incurred in the coherent strategy detailed above

The value-based medicine comparative effectiveness and cost-effectiveness of penetrating keratoplasty for keratoconus.

Science.gov (United States)

Roe, Richard H; Lass, Jonathan H; Brown, Gary C; Brown, Melissa M

2008-10-01

To perform a base case, comparative effectiveness, and cost-effectiveness (cost-utility) analysis of penetrating keratoplasty for patients with severe keratoconus. Visual acuity data were obtained from a large, retrospective multicenter study in which patients with keratoconus with less than 20/40 best corrected visual acuity and/or the inability to wear contact lenses underwent penetrating keratoplasty, with an average follow-up of 2.1 years. The results were combined with other retrospective studies investigating complication rates of penetrating keratoplasty. The data were then incorporated into a cost-utility model using patient preference-based, time trade-off utilities, computer-based decision analysis, and a net present value model to account for the time value of outcomes and money. The comparative effectiveness of the intervention is expressed in quality-of-life gain and QALYs (quality-adjusted life-years), and the cost-effectiveness results are expressed in the outcome of $/QALY (dollars spent per QALY). Penetrating keratoplasty in 1 eye for patients with severe keratoconus results in a comparative effectiveness (value gain) of 16.5% improvement in quality of life every day over the 44-year life expectancy of the average patient with severe keratoconus. Discounting the total value gain of 5.36 QALYs at a 3% annual discount rate yields 3.05 QALYs gained. The incremental cost for penetrating keratoplasty, including all complications, is $5934 ($5913 discounted at 3% per year). Thus, the incremental cost-utility (discounted at 3% annually) for this intervention is $5913/3.05 QALYs = $1942/QALY. If both eyes undergo corneal transplant, the total discounted value gain is 30% and the overall cost-utility is $2003. Surgery on the second eye confers a total discounted value gain of 2.5 QALYs, yielding a quality-of-life gain of 11.6% and a discounted cost-utility of $2238/QALY. Penetrating keratoplasty for patients with severe keratoconus seems to be a

Hydrogen Station Cost Estimates: Comparing Hydrogen Station Cost Calculator Results with other Recent Estimates

Energy Technology Data Exchange (ETDEWEB)

Melaina, M. [National Renewable Energy Lab. (NREL), Golden, CO (United States); Penev, M. [National Renewable Energy Lab. (NREL), Golden, CO (United States)

2013-09-01

This report compares hydrogen station cost estimates conveyed by expert stakeholders through the Hydrogen Station Cost Calculation (HSCC) to a select number of other cost estimates. These other cost estimates include projections based upon cost models and costs associated with recently funded stations.

Cost and resource utilization associated with use of computed tomography to evaluate chest pain in the emergency department: the Rule Out Myocardial Infarction using Computer Assisted Tomography (ROMICAT) study.

Science.gov (United States)

Hulten, Edward; Goehler, Alexander; Bittencourt, Marcio Sommer; Bamberg, Fabian; Schlett, Christopher L; Truong, Quynh A; Nichols, John; Nasir, Khurram; Rogers, Ian S; Gazelle, Scott G; Nagurney, John T; Hoffmann, Udo; Blankstein, Ron

2013-09-01

Coronary computed tomographic angiography (cCTA) allows rapid, noninvasive exclusion of obstructive coronary artery disease (CAD). However, concern exists whether implementation of cCTA in the assessment of patients presenting to the emergency department with acute chest pain will lead to increased downstream testing and costs compared with alternative strategies. Our aim was to compare observed actual costs of usual care (UC) with projected costs of a strategy including early cCTA in the evaluation of patients with acute chest pain in the Rule Out Myocardial Infarction Using Computer Assisted Tomography I (ROMICAT I) study. We compared cost and hospital length of stay of UC observed among 368 patients enrolled in the ROMICAT I study with projected costs of management based on cCTA. Costs of UC were determined by an electronic cost accounting system. Notably, UC was not influenced by cCTA results because patients and caregivers were blinded to the cCTA results. Costs after early implementation of cCTA were estimated assuming changes in management based on cCTA findings of the presence and severity of CAD. Sensitivity analysis was used to test the influence of key variables on both outcomes and costs. We determined that in comparison with UC, cCTA-guided triage, whereby patients with no CAD are discharged, could reduce total hospital costs by 23% (Pcost increases such that when the prevalence of ≥ 50% stenosis is >28% to 33%, the use of cCTA becomes more costly than UC. cCTA may be a cost-saving tool in acute chest pain populations that have a prevalence of potentially obstructive CAD cost would be anticipated in populations with higher prevalence of disease.

Computational cost for detecting inspiralling binaries using a network of laser interferometric detectors

CERN Document Server

Pai, A; Dhurandhar, S V

2002-01-01

We extend a coherent network data-analysis strategy developed earlier for detecting Newtonian waveforms to the case of post-Newtonian (PN) waveforms. Since the PN waveform depends on the individual masses of the inspiralling binary, the parameter-space dimension increases by one from that of the Newtonian case. We obtain the number of templates and estimate the computational costs for PN waveforms: for a lower mass limit of 1M sub o sub - sub d sub o sub t , for LIGO-I noise and with 3% maximum mismatch, the online computational speed requirement for single detector is a few Gflops; for a two-detector network it is hundreds of Gflops and for a three-detector network it is tens of Tflops. Apart from idealistic networks, we obtain results for realistic networks comprising of LIGO and VIRGO. Finally, we compare costs incurred in a coincidence detection strategy with those incurred in the coherent strategy detailed above.

Unenhanced computed tomography in acute renal colic reduces cost outside radiology department

DEFF Research Database (Denmark)

Lauritsen, J.; Andersen, J.R.; Nordling, J.

2008-01-01

BACKGROUND: Unenhanced multidetector computed tomography (UMDCT) is well established as the procedure of choice for radiologic evaluation of patients with renal colic. The procedure has both clinical and financial consequences for departments of surgery and radiology. However, the financial effect...... outside the radiology department is poorly elucidated. PURPOSE: To evaluate the financial consequences outside of the radiology department, a retrospective study comparing the ward occupation of patients examined with UMDCT to that of intravenous urography (IVU) was performed. MATERIAL AND METHODS......) saved the hospital USD 265,000 every 6 months compared to the use of IVU. CONCLUSION: Use of UMDCT compared to IVU in patients with renal colic leads to cost savings outside the radiology department Udgivelsesdato: 2008/12...

Computing Cost Price for Cataract Surgery by Activity Based Costing (ABC Method at Hazrat-E-Zahra Hospital, Isfahan University of Medical Sciences, 2014

Directory of Open Access Journals (Sweden)

Masuod Ferdosi

2016-10-01

Full Text Available Background: Hospital managers need to have accurate information about actual costs to make efficient and effective decisions. In activity based costing method, first, activities are recognized and then direct and indirect costs are computed based on allocation methods. The aim of this study was to compute the cost price for cataract surgery by Activity Based Costing (ABC method at Hazrat-e-Zahra Hospital, Isfahan University of Medical Sciences. Methods: This was a cross- sectional study for computing the costs of cataract surgery by activity based costing technique in Hazrat-e-Zahra Hospital in Isfahan University of Medical Sciences, 2014. Data were collected through interview and direct observation and analyzed by Excel software. Results: According to the results of this study, total cost in cataract surgery was 8,368,978 Rials. Personnel cost included 62.2% (5,213,574 Rials of total cost of cataract surgery that is the highest share of surgery costs. The cost of consumables was 7.57% (1,992,852 Rials of surgery costs. Conclusion: Based on the results, there was different between cost price of the services and public Tariff which appears as hazards or financial crises to the hospital. Therefore, it is recommended to use the right methods to compute the costs relating to Activity Based Costing. Cost price of cataract surgery can be reduced by strategies such as decreasing the cost of consumables.

Low cost spacecraft computers: Oxymoron or future trend?

Science.gov (United States)

Manning, Robert M.

1993-01-01

Over the last few decades, application of current terrestrial computer technology in embedded spacecraft control systems has been expensive and wrought with many technical challenges. These challenges have centered on overcoming the extreme environmental constraints (protons, neutrons, gamma radiation, cosmic rays, temperature, vibration, etc.) that often preclude direct use of commercial off-the-shelf computer technology. Reliability, fault tolerance and power have also greatly constrained the selection of spacecraft control system computers. More recently, new constraints are being felt, cost and mass in particular, that have again narrowed the degrees of freedom spacecraft designers once enjoyed. This paper discusses these challenges, how they were previously overcome, how future trends in commercial computer technology will simplify (or hinder) selection of computer technology for spacecraft control applications, and what spacecraft electronic system designers can do now to circumvent them.

Effectiveness of Multimedia Elements in Computer Supported Instruction: Analysis of Personalization Effects, Students' Performances and Costs

Science.gov (United States)

Zaidel, Mark; Luo, XiaoHui

2010-01-01

This study investigates the efficiency of multimedia instruction at the college level by comparing the effectiveness of multimedia elements used in the computer supported learning with the cost of their preparation. Among the various technologies that advance learning, instructors and students generally identify interactive multimedia elements as…

Cost-effectiveness of Bezlotoxumab Compared With Placebo for the Prevention of Recurrent Clostridium difficile Infection.

Science.gov (United States)

Prabhu, Vimalanand S; Dubberke, Erik R; Dorr, Mary Beth; Elbasha, Elamin; Cossrow, Nicole; Jiang, Yiling; Marcella, Stephen

2018-01-18

Clostridium difficile infection (CDI) is the most commonly recognized cause of recurrent diarrhea. Bezlotoxumab, administered concurrently with antibiotics directed against C. difficile (standard of care [SoC]), has been shown to reduce the recurrence of CDI, compared with SoC alone. This study aimed to assess the cost-effectiveness of bezlotoxumab administered concurrently with SoC, compared with SoC alone, in subgroups of patients at risk of recurrence of CDI. A computer-based Markov health state transition model was designed to track the natural history of patients infected with CDI. A cohort of patients entered the model with either a mild/moderate or severe CDI episode, and were treated with SoC antibiotics together with either bezlotoxumab or placebo. The cohort was followed over a lifetime horizon, and costs and utilities for the various health states were used to estimate incremental cost-effectiveness ratios (ICERs). Both deterministic and probabilistic sensitivity analyses were used to test the robustness of the results. The cost-effectiveness model showed that, compared with placebo, bezlotoxumab was associated with 0.12 quality-adjusted life-years (QALYs) gained and was cost-effective in preventing CDI recurrences in the entire trial population, with an ICER of $19824/QALY gained. Compared with placebo, bezlotoxumab was also cost-effective in the subgroups of patients aged ≥65 years (ICER of $15298/QALY), immunocompromised patients (ICER of $12597/QALY), and patients with severe CDI (ICER of $21430/QALY). Model-based results demonstrated that bezlotoxumab was cost-effective in the prevention of recurrent CDI compared with placebo, among patients receiving SoC antibiotics for treatment of CDI. © The Author 2017. Published by Oxford University Press for the Infectious Diseases Society of America. All rights reserved. For permissions, e-mail: journals.permissions@oup.com.

Estimating boiling water reactor decommissioning costs. A user's manual for the BWR Cost Estimating Computer Program (CECP) software: Draft report for comment

International Nuclear Information System (INIS)

Bierschbach, M.C.

1994-12-01

With the issuance of the Decommissioning Rule (July 27, 1988), nuclear power plant licensees are required to submit to the U.S. Regulatory Commission (NRC) for review, decommissioning plans and cost estimates. This user's manual and the accompanying Cost Estimating Computer Program (CECP) software provide a cost-calculating methodology to the NRC staff that will assist them in assessing the adequacy of the licensee submittals. The CECP, designed to be used on a personal computer, provides estimates for the cost of decommissioning BWR power stations to the point of license termination. Such cost estimates include component, piping, and equipment removal costs; packaging costs; decontamination costs; transportation costs; burial costs; and manpower costs. In addition to costs, the CECP also calculates burial volumes, person-hours, crew-hours, and exposure person-hours associated with decommissioning

Cost-effectiveness of PET and PET/Computed Tomography

DEFF Research Database (Denmark)

Gerke, Oke; Hermansson, Ronnie; Hess, Søren

2015-01-01

measure by means of incremental cost-effectiveness ratios when considering the replacement of the standard regimen by a new diagnostic procedure. This article discusses economic assessments of PET and PET/computed tomography reported until mid-July 2014. Forty-seven studies on cancer and noncancer...

Low-cost computer mouse for the elderly or disabled in Taiwan.

Science.gov (United States)

Chen, C-C; Chen, W-L; Chen, B-N; Shih, Y-Y; Lai, J-S; Chen, Y-L

2014-01-01

A mouse is an important communication interface between a human and a computer, but it is still difficult to use for the elderly or disabled. To develop a low-cost computer mouse auxiliary tool. The principal structure of the low-cost mouse auxiliary tool is the IR (infrared ray) array module and the Wii icon sensor module, which combine with reflective tape and the SQL Server database. This has several benefits including cheap hardware cost, fluent control, prompt response, adaptive adjustment and portability. Also, it carries the game module with the function of training and evaluation; to the trainee, it is really helpful to upgrade the sensitivity of consciousness/sense and the centralization of attention. The intervention phase/maintenance phase, with regard to clicking accuracy and use of time, p value (p< 0.05) reach the level of significance. The development of the low cost adaptive computer mouse auxiliary tool was completed during the study and was also verified as having the characteristics of low cost, easy operation and the adaptability. To patients with physical disabilities, if they have independent control action parts of their limbs, the mouse auxiliary tool is suitable for them to use, i.e. the user only needs to paste the reflective tape by the independent control action parts of the body to operate the mouse auxiliary tool.

Cost-Effectiveness of Computed Tomographic Colonography: A Prospective Comparison with Colonoscopy

International Nuclear Information System (INIS)

Arnesen, R.B.; Ginnerup-Pedersen, B.; Poulsen, P.B.; Benzon, K. von; Adamsen, S.; Laurberg, S.; Hart-Hansen, O.

2007-01-01

Purpose: To estimate the cost-effectiveness of detecting colorectal polyps with computed tomographic colonography (CTC) and subsequent polypectomy with primary colonoscopy (CC), using CC as the alternative strategy. Material and Methods: A marginal analysis was performed regarding 103 patients who had had CTC prior to same-day CC at two hospitals, H-I (n 53) and H-II (n = 50). The patients were randomly chosen from surveillance and symptomatic study populations (148 at H-I and 231 at H-II). Populations, organizations, and procedures were compared. Cost data on time consumption, medication, and minor equipment were collected prospectively, while data on salaries and major equipment were collected retrospectively. The effect was the (previously published) sensitivities of CTC and CC for detection of colorectal polyps ≥6 mm (H-I, n = 148) or ≥5 mm (H-II, n = 231). Results: Thirteen patients at each center had at least one colorectal polyp ≥6 mm or ≥5 mm. CTC was the cost-effective alternative at H-I (Euro 187 vs. Euro 211), while CC was the cost-effective alternative at H-II (Euro 239 vs. Euro 192). The cost-effectiveness (costs per finding) mainly depended on the sensitivity of CTC and CC, but the depreciation of equipment and the staff's use of time were highly influential as well. Conclusion: Detection of colorectal polyps ≥6 mm or ≥5 mm with CTC, followed by polypectomy by CC, can be performed cost-effectively at some institutions with the appropriate hardware and organization keywords

Plant process computer replacements - techniques to limit installation schedules and costs

International Nuclear Information System (INIS)

Baker, M.D.; Olson, J.L.

1992-01-01

Plant process computer systems, a standard fixture in all nuclear power plants, are used to monitor and display important plant process parameters. Scanning thousands of field sensors and alarming out-of-limit values, these computer systems are heavily relied on by control room operators. The original nuclear steam supply system (NSSS) vendor for the power plant often supplied the plant process computer. Designed using sixties and seventies technology, a plant's original process computer has been obsolete for some time. Driven by increased maintenance costs and new US Nuclear Regulatory Commission regulations such as NUREG-0737, Suppl. 1, many utilities have replaced their process computers with more modern computer systems. Given that computer systems are by their nature prone to rapid obsolescence, this replacement cycle will likely repeat. A process computer replacement project can be a significant capital expenditure and must be performed during a scheduled refueling outage. The object of the installation process is to install a working system on schedule. Experience gained by supervising several computer replacement installations has taught lessons that, if applied, will shorten the schedule and limit the risk of costly delays. Examples illustrating this technique are given. This paper and these examples deal only with the installation process and assume that the replacement computer system has been adequately designed, and development and factory tested

Manual of phosphoric acid fuel cell power plant cost model and computer program

Science.gov (United States)

Lu, C. Y.; Alkasab, K. A.

1984-01-01

Cost analysis of phosphoric acid fuel cell power plant includes two parts: a method for estimation of system capital costs, and an economic analysis which determines the levelized annual cost of operating the system used in the capital cost estimation. A FORTRAN computer has been developed for this cost analysis.

Fixed-point image orthorectification algorithms for reduced computational cost

Science.gov (United States)

French, Joseph Clinton

Imaging systems have been applied to many new applications in recent years. With the advent of low-cost, low-power focal planes and more powerful, lower cost computers, remote sensing applications have become more wide spread. Many of these applications require some form of geolocation, especially when relative distances are desired. However, when greater global positional accuracy is needed, orthorectification becomes necessary. Orthorectification is the process of projecting an image onto a Digital Elevation Map (DEM), which removes terrain distortions and corrects the perspective distortion by changing the viewing angle to be perpendicular to the projection plane. Orthorectification is used in disaster tracking, landscape management, wildlife monitoring and many other applications. However, orthorectification is a computationally expensive process due to floating point operations and divisions in the algorithm. To reduce the computational cost of on-board processing, two novel algorithm modifications are proposed. One modification is projection utilizing fixed-point arithmetic. Fixed point arithmetic removes the floating point operations and reduces the processing time by operating only on integers. The second modification is replacement of the division inherent in projection with a multiplication of the inverse. The inverse must operate iteratively. Therefore, the inverse is replaced with a linear approximation. As a result of these modifications, the processing time of projection is reduced by a factor of 1.3x with an average pixel position error of 0.2% of a pixel size for 128-bit integer processing and over 4x with an average pixel position error of less than 13% of a pixel size for a 64-bit integer processing. A secondary inverse function approximation is also developed that replaces the linear approximation with a quadratic. The quadratic approximation produces a more accurate approximation of the inverse, allowing for an integer multiplication calculation

Development of computer program for estimating decommissioning cost - 59037

International Nuclear Information System (INIS)

Kim, Hak-Soo; Park, Jong-Kil

2012-01-01

The programs for estimating the decommissioning cost have been developed for many different purposes and applications. The estimation of decommissioning cost is required a large amount of data such as unit cost factors, plant area and its inventory, waste treatment, etc. These make it difficult to use manual calculation or typical spreadsheet software such as Microsoft Excel. The cost estimation for eventual decommissioning of nuclear power plants is a prerequisite for safe, timely and cost-effective decommissioning. To estimate the decommissioning cost more accurately and systematically, KHNP, Korea Hydro and Nuclear Power Co. Ltd, developed a decommissioning cost estimating computer program called 'DeCAT-Pro', which is Decommission-ing Cost Assessment Tool - Professional. (Hereinafter called 'DeCAT') This program allows users to easily assess the decommissioning cost with various decommissioning options. Also, this program provides detailed reporting for decommissioning funding requirements as well as providing detail project schedules, cash-flow, staffing plan and levels, and waste volumes by waste classifications and types. KHNP is planning to implement functions for estimating the plant inventory using 3-D technology and for classifying the conditions of radwaste disposal and transportation automatically. (authors)

An approximate fractional Gaussian noise model with computational cost

KAUST Repository

Sø rbye, Sigrunn H.; Myrvoll-Nilsen, Eirik; Rue, Haavard

2017-01-01

Fractional Gaussian noise (fGn) is a stationary time series model with long memory properties applied in various fields like econometrics, hydrology and climatology. The computational cost in fitting an fGn model of length $n$ using a likelihood

On the role of cost-sensitive learning in multi-class brain-computer interfaces.

Science.gov (United States)

Devlaminck, Dieter; Waegeman, Willem; Wyns, Bart; Otte, Georges; Santens, Patrick

2010-06-01

Brain-computer interfaces (BCIs) present an alternative way of communication for people with severe disabilities. One of the shortcomings in current BCI systems, recently put forward in the fourth BCI competition, is the asynchronous detection of motor imagery versus resting state. We investigated this extension to the three-class case, in which the resting state is considered virtually lying between two motor classes, resulting in a large penalty when one motor task is misclassified into the other motor class. We particularly focus on the behavior of different machine-learning techniques and on the role of multi-class cost-sensitive learning in such a context. To this end, four different kernel methods are empirically compared, namely pairwise multi-class support vector machines (SVMs), two cost-sensitive multi-class SVMs and kernel-based ordinal regression. The experimental results illustrate that ordinal regression performs better than the other three approaches when a cost-sensitive performance measure such as the mean-squared error is considered. By contrast, multi-class cost-sensitive learning enables us to control the number of large errors made between two motor tasks.

Standardization: using comparative maintenance costs in an economic analysis

OpenAIRE

Clark, Roger Nelson

1987-01-01

Approved for public release; distribution is unlimited This thesis investigates the use of comparative maintenance costs of functionally interchangeable equipments in similar U.S. Navy shipboard applications in an economic analysis of standardization. The economics of standardization, life-cycle costing, and the Navy 3-M System are discussed in general. An analysis of 3-M System maintenance costs for a selected equipment, diesel engines, is conducted. The potential use of comparative ma...

Comparative Life-Cycle Cost Analysis Of Solar Photovoltaic Power ...

African Journals Online (AJOL)

Comparative Life-Cycle Cost Analysis Of Solar Photovoltaic Power System And Diesel Generator System For Remote Residential Application In Nigeria. ... like capital cost, and diesel fuel costs are varied. The results show the photovoltaic system to be more cost-effective at low-power ranges of electrical energy supply.

Adaptive Radar Signal Processing-The Problem of Exponential Computational Cost

National Research Council Canada - National Science Library

Rangaswamy, Muralidhar

2003-01-01

.... Extensions to handle the case of non-Gaussian clutter statistics are presented. Current challenges of limited training data support, computational cost, and severely heterogeneous clutter backgrounds are outlined...

Costs incurred by applying computer-aided design/computer-aided manufacturing techniques for the reconstruction of maxillofacial defects.

Science.gov (United States)

Rustemeyer, Jan; Melenberg, Alex; Sari-Rieger, Aynur

2014-12-01

This study aims to evaluate the additional costs incurred by using a computer-aided design/computer-aided manufacturing (CAD/CAM) technique for reconstructing maxillofacial defects by analyzing typical cases. The medical charts of 11 consecutive patients who were subjected to the CAD/CAM technique were considered, and invoices from the companies providing the CAD/CAM devices were reviewed for every case. The number of devices used was significantly correlated with cost (r = 0.880; p costs were found between cases in which prebent reconstruction plates were used (€3346.00 ± €29.00) and cases in which they were not (€2534.22 ± €264.48; p costs of two, three and four devices, even when ignoring the cost of reconstruction plates. Additional fees provided by statutory health insurance covered a mean of 171.5% ± 25.6% of the cost of the CAD/CAM devices. Since the additional fees provide financial compensation, we believe that the CAD/CAM technique is suited for wide application and not restricted to complex cases. Where additional fees/funds are not available, the CAD/CAM technique might be unprofitable, so the decision whether or not to use it remains a case-to-case decision with respect to cost versus benefit. Copyright © 2014 European Association for Cranio-Maxillo-Facial Surgery. Published by Elsevier Ltd. All rights reserved.

Comparison of different strategies in prenatal screening for Down's syndrome: cost effectiveness analysis of computer simulation.

Science.gov (United States)

Gekas, Jean; Gagné, Geneviève; Bujold, Emmanuel; Douillard, Daniel; Forest, Jean-Claude; Reinharz, Daniel; Rousseau, François

2009-02-13

To assess and compare the cost effectiveness of three different strategies for prenatal screening for Down's syndrome (integrated test, sequential screening, and contingent screenings) and to determine the most useful cut-off values for risk. Computer simulations to study integrated, sequential, and contingent screening strategies with various cut-offs leading to 19 potential screening algorithms. The computer simulation was populated with data from the Serum Urine and Ultrasound Screening Study (SURUSS), real unit costs for healthcare interventions, and a population of 110 948 pregnancies from the province of Québec for the year 2001. Cost effectiveness ratios, incremental cost effectiveness ratios, and screening options' outcomes. The contingent screening strategy dominated all other screening options: it had the best cost effectiveness ratio ($C26,833 per case of Down's syndrome) with fewer procedure related euploid miscarriages and unnecessary terminations (respectively, 6 and 16 per 100,000 pregnancies). It also outperformed serum screening at the second trimester. In terms of the incremental cost effectiveness ratio, contingent screening was still dominant: compared with screening based on maternal age alone, the savings were $C30,963 per additional birth with Down's syndrome averted. Contingent screening was the only screening strategy that offered early reassurance to the majority of women (77.81%) in first trimester and minimised costs by limiting retesting during the second trimester (21.05%). For the contingent and sequential screening strategies, the choice of cut-off value for risk in the first trimester test significantly affected the cost effectiveness ratios (respectively, from $C26,833 to $C37,260 and from $C35,215 to $C45,314 per case of Down's syndrome), the number of procedure related euploid miscarriages (from 6 to 46 and from 6 to 45 per 100,000 pregnancies), and the number of unnecessary terminations (from 16 to 26 and from 16 to 25 per 100

A survey of cost accounting in service-oriented computing

NARCIS (Netherlands)

de Medeiros, Robson W.A.; Rosa, Nelson S.; Campos, Glaucia M.M.; Ferreira Pires, Luis

Nowadays, companies are increasingly offering their business services through computational services on the Internet in order to attract more customers and increase their revenues. However, these services have financial costs that need to be managed in order to maximize profit. Several models and

Low-Budget Computer Programming in Your School (An Alternative to the Cost of Large Computers). Illinois Series on Educational Applications of Computers. No. 14.

Science.gov (United States)

Dennis, J. Richard; Thomson, David

This paper is concerned with a low cost alternative for providing computer experience to secondary school students. The brief discussion covers the programmable calculator and its relevance for teaching the concepts and the rudiments of computer programming and for computer problem solving. A list of twenty-five programming activities related to…

A feasibility study on direct methanol fuel cells for laptop computers based on a cost comparison with lithium-ion batteries

International Nuclear Information System (INIS)

Wee, Jung-Ho

2007-01-01

This paper compares the total cost of direct methanol fuel cell (DMFC) and lithium (Li)-ion battery systems when applied as the power supply for laptop computers in the Korean environment. The average power output and operational time of the laptop computers were assumed to be 20 W and 3000 h, respectively. Considering the status of their technologies and with certain conditions assumed, the total costs were calculated to be US$140 for the Li-ion battery and US$362 for DMFC. The manufacturing costs of the DMFC and Li-ion battery systems were calculated to be $16.65 W -1 and $0.77 W h -1 , and the energy consumption costs to be $0.00051 W h -1 and $0.00032 W h -1 , respectively. The higher fuel consumption cost of the DMFC system was due to the methanol (MeOH) crossover loss. Therefore, the requirements for DMFCs to be able to compete with Li-ion batteries in terms of energy cost include reducing the crossover level to at an order magnitude of -9 and the MeOH price to under $0.5 kg -1 . Under these conditions, if the DMFC manufacturing cost could be reduced to $6.30 W -1 , then the DMFC system would become at least as competitive as the Li-ion battery system for powering laptop computers in Korea. (author)

Software Requirements for a System to Compute Mean Failure Cost

Energy Technology Data Exchange (ETDEWEB)

Aissa, Anis Ben [University of Tunis, Belvedere, Tunisia; Abercrombie, Robert K [ORNL; Sheldon, Frederick T [ORNL; Mili, Ali [New Jersey Insitute of Technology

2010-01-01

In earlier works, we presented a computational infrastructure that allows an analyst to estimate the security of a system in terms of the loss that each stakeholder. We also demonstrated this infrastructure through the results of security breakdowns for the ecommerce case. In this paper, we illustrate this infrastructure by an application that supports the computation of the Mean Failure Cost (MFC) for each stakeholder.

Operating Dedicated Data Centers - Is It Cost-Effective?

Science.gov (United States)

Ernst, M.; Hogue, R.; Hollowell, C.; Strecker-Kellog, W.; Wong, A.; Zaytsev, A.

2014-06-01

The advent of cloud computing centres such as Amazon's EC2 and Google's Computing Engine has elicited comparisons with dedicated computing clusters. Discussions on appropriate usage of cloud resources (both academic and commercial) and costs have ensued. This presentation discusses a detailed analysis of the costs of operating and maintaining the RACF (RHIC and ATLAS Computing Facility) compute cluster at Brookhaven National Lab and compares them with the cost of cloud computing resources under various usage scenarios. An extrapolation of likely future cost effectiveness of dedicated computing resources is also presented.

Direct costs and cost-effectiveness of dual-source computed tomography and invasive coronary angiography in patients with an intermediate pretest likelihood for coronary artery disease.

Science.gov (United States)

Dorenkamp, Marc; Bonaventura, Klaus; Sohns, Christian; Becker, Christoph R; Leber, Alexander W

2012-03-01

The study aims to determine the direct costs and comparative cost-effectiveness of latest-generation dual-source computed tomography (DSCT) and invasive coronary angiography for diagnosing coronary artery disease (CAD) in patients suspected of having this disease. The study was based on a previously elaborated cohort with an intermediate pretest likelihood for CAD and on complementary clinical data. Cost calculations were based on a detailed analysis of direct costs, and generally accepted accounting principles were applied. Based on Bayes' theorem, a mathematical model was used to compare the cost-effectiveness of both diagnostic approaches. Total costs included direct costs, induced costs and costs of complications. Effectiveness was defined as the ability of a diagnostic test to accurately identify a patient with CAD. Direct costs amounted to €98.60 for DSCT and to €317.75 for invasive coronary angiography. Analysis of model calculations indicated that cost-effectiveness grew hyperbolically with increasing prevalence of CAD. Given the prevalence of CAD in the study cohort (24%), DSCT was found to be more cost-effective than invasive coronary angiography (€970 vs €1354 for one patient correctly diagnosed as having CAD). At a disease prevalence of 49%, DSCT and invasive angiography were equally effective with costs of €633. Above a threshold value of disease prevalence of 55%, proceeding directly to invasive coronary angiography was more cost-effective than DSCT. With proper patient selection and consideration of disease prevalence, DSCT coronary angiography is cost-effective for diagnosing CAD in patients with an intermediate pretest likelihood for it. However, the range of eligible patients may be smaller than previously reported.

A comparative cost analysis of picture archiving and communications systems (PACS versus conventional radiology in the private sector

Directory of Open Access Journals (Sweden)

Indres Moodley

2015-03-01

Aim: To undertake an incremental cost analysis of PACS compared with conventional radiology to determine productivity gains, if any, at two private hospitals in Durban. Method: An incremental cost analysis for chest radiographs, computed tomography and magnetic resonance imaging brain scans with and without contrast were performed. The overall incremental cost for PACS in comparison with a conventional radiology site was determined. The net present value was also determined to evaluate the capital budgeting requirements for both systems. Results: The incremental cost of both capital and the radiology information system for installing PACS shows an expected increase. The incremental PACS image cost shows a reduction. Conclusion: The study provides a benchmark for the cost incurred when implementing PACS. It also provides a decision framework for radiology departments that plan to introduce PACS and helps to determine the feasibility of its introduction.

A low-cost vector processor boosting compute-intensive image processing operations

Science.gov (United States)

Adorf, Hans-Martin

1992-01-01

Low-cost vector processing (VP) is within reach of everyone seriously engaged in scientific computing. The advent of affordable add-on VP-boards for standard workstations complemented by mathematical/statistical libraries is beginning to impact compute-intensive tasks such as image processing. A case in point in the restoration of distorted images from the Hubble Space Telescope. A low-cost implementation is presented of the standard Tarasko-Richardson-Lucy restoration algorithm on an Intel i860-based VP-board which is seamlessly interfaced to a commercial, interactive image processing system. First experience is reported (including some benchmarks for standalone FFT's) and some conclusions are drawn.

Low cost highly available digital control computer

International Nuclear Information System (INIS)

Silvers, M.W.

1986-01-01

When designing digital controllers for critical plant control it is important to provide several features. Among these are reliability, availability, maintainability, environmental protection, and low cost. An examination of several applications has lead to a design that can be produced for approximately $20,000 (1000 control points). This design is compatible with modern concepts in distributed and hierarchical control. The canonical controller element is a dual-redundant self-checking computer that communicates with a cross-strapped, electrically isolated input/output system. The input/output subsystem comprises multiple intelligent input/output cards. These cards accept commands from the primary processor which are validated, executed, and acknowledged. Each card may be hot replaced to facilitate sparing. The implementation of the dual-redundant computer architecture is discussed. Called the FS-86, this computer can be used for a variety of applications. It has most recently found application in the upgrade of San Francisco's Bay Area Rapid Transit (BART) train control currently in progress and has been proposed for feedwater control in a boiling water reactor

Handheld computers for self-administered sensitive data collection: A comparative study in Peru

Directory of Open Access Journals (Sweden)

Hughes James P

2008-03-01

Full Text Available Abstract Background Low-cost handheld computers (PDA potentially represent an efficient tool for collecting sensitive data in surveys. The goal of this study is to evaluate the quality of sexual behavior data collected with handheld computers in comparison with paper-based questionnaires. Methods A PDA-based program for data collection was developed using Open-Source tools. In two cross-sectional studies, we compared data concerning sexual behavior collected with paper forms to data collected with PDA-based forms in Ancon (Lima. Results The first study enrolled 200 participants (18–29 years. General agreement between data collected with paper format and handheld computers was 86%. Categorical variables agreement was between 70.5% and 98.5% (Kappa: 0.43–0.86 while numeric variables agreement was between 57.1% and 79.8% (Spearman: 0.76–0.95. Agreement and correlation were higher in those who had completed at least high school than those with less education. The second study enrolled 198 participants. Rates of responses to sensitive questions were similar between both kinds of questionnaires. However, the number of inconsistencies (p = 0.0001 and missing values (p = 0.001 were significantly higher in paper questionnaires. Conclusion This study showed the value of the use of handheld computers for collecting sensitive data, since a high level of agreement between paper and PDA responses was reached. In addition, a lower number of inconsistencies and missing values were found with the PDA-based system. This study has demonstrated that it is feasible to develop a low-cost application for handheld computers, and that PDAs are feasible alternatives for collecting field data in a developing country.

The aerodynamic cost of flight in bats--comparing theory with measurement

Science.gov (United States)

von Busse, Rhea; Waldman, Rye M.; Swartz, Sharon M.; Breuer, Kenneth S.

2012-11-01

Aerodynamic theory has long been used to predict the aerodynamic power required for animal flight. However, even though the actuator disk model does not account for the flapping motion of a wing, it is used for lack of any better model. The question remains: how close are these predictions to reality? We designed a study to compare predicted aerodynamic power to measured power from the kinetic energy contained in the wake shed behind a bat flying in a wind tunnel. A high-accuracy displaced light-sheet stereo PIV system was used in the Trefftz plane to capture the wake behind four bats flown over a range of flight speeds (1-6m/s). The total power in the wake was computed from the wake vorticity and these estimates were compared with the power predicted using Pennycuick's model for bird flight as well as estimates derived from measurements of the metabolic cost of flight, previously acquired from the same individuals.

Operating dedicated data centers – is it cost-effective?

International Nuclear Information System (INIS)

Ernst, M; Hogue, R; Hollowell, C; Strecker-Kellog, W; Wong, A; Zaytsev, A

2014-01-01

The advent of cloud computing centres such as Amazon's EC2 and Google's Computing Engine has elicited comparisons with dedicated computing clusters. Discussions on appropriate usage of cloud resources (both academic and commercial) and costs have ensued. This presentation discusses a detailed analysis of the costs of operating and maintaining the RACF (RHIC and ATLAS Computing Facility) compute cluster at Brookhaven National Lab and compares them with the cost of cloud computing resources under various usage scenarios. An extrapolation of likely future cost effectiveness of dedicated computing resources is also presented.

Client-server computer architecture saves costs and eliminates bottlenecks

International Nuclear Information System (INIS)

Darukhanavala, P.P.; Davidson, M.C.; Tyler, T.N.; Blaskovich, F.T.; Smith, C.

1992-01-01

This paper reports that workstation, client-server architecture saved costs and eliminated bottlenecks that BP Exploration (Alaska) Inc. experienced with mainframe computer systems. In 1991, BP embarked on an ambitious project to change technical computing for its Prudhoe Bay, Endicott, and Kuparuk operations on Alaska's North Slope. This project promised substantial rewards, but also involved considerable risk. The project plan called for reservoir simulations (which historically had run on a Cray Research Inc. X-MP supercomputer in the company's Houston data center) to be run on small computer workstations. Additionally, large Prudhoe Bay, Endicott, and Kuparuk production and reservoir engineering data bases and related applications also would be moved to workstations, replacing a Digital Equipment Corp. VAX cluster in Anchorage

Cost Savings Associated with the Adoption of a Cloud Computing Data Transfer System for Trauma Patients.

Science.gov (United States)

Feeney, James M; Montgomery, Stephanie C; Wolf, Laura; Jayaraman, Vijay; Twohig, Michael

2016-09-01

Among transferred trauma patients, challenges with the transfer of radiographic studies include problems loading or viewing the studies at the receiving hospitals, and problems manipulating, reconstructing, or evalu- ating the transferred images. Cloud-based image transfer systems may address some ofthese problems. We reviewed the charts of patients trans- ferred during one year surrounding the adoption of a cloud computing data transfer system. We compared the rates of repeat imaging before (precloud) and af- ter (postcloud) the adoption of the cloud-based data transfer system. During the precloud period, 28 out of 100 patients required 90 repeat studies. With the cloud computing transfer system in place, three out of 134 patients required seven repeat films. There was a statistically significant decrease in the proportion of patients requiring repeat films (28% to 2.2%, P < .0001). Based on an annualized volume of 200 trauma patient transfers, the cost savings estimated using three methods of cost analysis, is between $30,272 and $192,453.

Comparative costs and cost-effectiveness of behavioural interventions as part of HIV prevention strategies.

Science.gov (United States)

Hsu, Justine; Zinsou, Cyprien; Parkhurst, Justin; N'Dour, Marguerite; Foyet, Léger; Mueller, Dirk H

2013-01-01

Behavioural interventions have been widely integrated in HIV/AIDS social marketing prevention strategies and are considered valuable in settings with high levels of risk behaviours and low levels of HIV/AIDS awareness. Despite their widespread application, there is a lack of economic evaluations comparing different behaviour change communication methods. This paper analyses the costs to increase awareness and the cost-effectiveness to influence behaviour change for five interventions in Benin. Cost and cost-effectiveness analyses used economic costs and primary effectiveness data drawn from surveys. Costs were collected for provider inputs required to implement the interventions in 2009 and analysed by 'person reached'. Cost-effectiveness was analysed by 'person reporting systematic condom use'. Sensitivity analyses were performed on all uncertain variables and major assumptions. Cost-per-person reached varies by method, with public outreach events the least costly (US$2.29) and billboards the most costly (US$25.07). Influence on reported behaviour was limited: only three of the five interventions were found to have a significant statistical correlation with reported condom use (i.e. magazines, radio broadcasts, public outreach events). Cost-effectiveness ratios per person reporting systematic condom use resulted in the following ranking: magazines, radio and public outreach events. Sensitivity analyses indicate rankings are insensitive to variation of key parameters although ratios must be interpreted with caution. This analysis suggests that while individual interventions are an attractive use of resources to raise awareness, this may not translate into a cost-effective impact on behaviour change. The study found that the extensive reach of public outreach events did not seem to influence behaviour change as cost-effectively when compared with magazines or radio broadcasts. Behavioural interventions are context-specific and their effectiveness influenced by a

Early assessment of the likely cost-effectiveness of a new technology: A Markov model with probabilistic sensitivity analysis of computer-assisted total knee replacement.

Science.gov (United States)

Dong, Hengjin; Buxton, Martin

2006-01-01

The objective of this study is to apply a Markov model to compare cost-effectiveness of total knee replacement (TKR) using computer-assisted surgery (CAS) with that of TKR using a conventional manual method in the absence of formal clinical trial evidence. A structured search was carried out to identify evidence relating to the clinical outcome, cost, and effectiveness of TKR. Nine Markov states were identified based on the progress of the disease after TKR. Effectiveness was expressed by quality-adjusted life years (QALYs). The simulation was carried out initially for 120 cycles of a month each, starting with 1,000 TKRs. A discount rate of 3.5 percent was used for both cost and effectiveness in the incremental cost-effectiveness analysis. Then, a probabilistic sensitivity analysis was carried out using a Monte Carlo approach with 10,000 iterations. Computer-assisted TKR was a long-term cost-effective technology, but the QALYs gained were small. After the first 2 years, the incremental cost per QALY of computer-assisted TKR was dominant because of cheaper and more QALYs. The incremental cost-effectiveness ratio (ICER) was sensitive to the "effect of CAS," to the CAS extra cost, and to the utility of the state "Normal health after primary TKR," but it was not sensitive to utilities of other Markov states. Both probabilistic and deterministic analyses produced similar cumulative serious or minor complication rates and complex or simple revision rates. They also produced similar ICERs. Compared with conventional TKR, computer-assisted TKR is a cost-saving technology in the long-term and may offer small additional QALYs. The "effect of CAS" is to reduce revision rates and complications through more accurate and precise alignment, and although the conclusions from the model, even when allowing for a full probabilistic analysis of uncertainty, are clear, the "effect of CAS" on the rate of revisions awaits long-term clinical evidence.

Low-cost autonomous perceptron neural network inspired by quantum computation

Science.gov (United States)

Zidan, Mohammed; Abdel-Aty, Abdel-Haleem; El-Sadek, Alaa; Zanaty, E. A.; Abdel-Aty, Mahmoud

2017-11-01

Achieving low cost learning with reliable accuracy is one of the important goals to achieve intelligent machines to save time, energy and perform learning process over limited computational resources machines. In this paper, we propose an efficient algorithm for a perceptron neural network inspired by quantum computing composite from a single neuron to classify inspirable linear applications after a single training iteration O(1). The algorithm is applied over a real world data set and the results are outer performs the other state-of-the art algorithms.

Time-Driven Activity-Based Costing: A Comparative Cost Analysis of Whole-Breast Radiotherapy Versus Balloon-Based Brachytherapy in the Management of Early-Stage Breast Cancer.

Science.gov (United States)

Schutzer, Matthew E; Arthur, Douglas W; Anscher, Mitchell S

2016-05-01

Value in health care is defined as outcomes achieved per dollar spent, and understanding cost is critical to delivering high-value care. Traditional costing methods reflect charges rather than fundamental costs to provide a service. The more rigorous method of time-driven activity-based costing was used to compare cost between whole-breast radiotherapy (WBRT) and accelerated partial-breast irradiation (APBI) using balloon-based brachytherapy. For WBRT (25 fractions with five-fraction boost) and APBI (10 fractions twice daily), process maps were created outlining each activity from consultation to post-treatment follow up. Through staff interviews, time estimates were obtained for each activity. The capacity cost rates (CCR), defined as cost per minute, were calculated for personnel, equipment, and physical space. Total cost was calculated by multiplying the time required of each resource by its CCR. This was then summed and combined with cost of consumable materials. The total cost for WBRT was $5,333 and comprised 56% personnel costs and 44% space/equipment costs. For APBI, the total cost was $6,941 (30% higher than WBRT) and comprised 51% personnel costs, 6% space/equipment costs, and 43% consumable materials costs. The attending physician had the highest CCR of all personnel ($4.28/min), and APBI required 24% more attending time than WBRT. The most expensive activity for APBI was balloon placement and for WBRT was computed tomography simulation. APBI cost more than WBRT when using the dose/fractionation schemes analyzed. Future research should use time-driven activity-based costing to better understand cost with the aim of reducing expenditure and defining bundled payments. Copyright © 2016 by American Society of Clinical Oncology.

Comparing the costs of three prostate cancer follow-up strategies: a cost minimisation analysis.

Science.gov (United States)

Pearce, Alison M; Ryan, Fay; Drummond, Frances J; Thomas, Audrey Alforque; Timmons, Aileen; Sharp, Linda

2016-02-01

Prostate cancer follow-up is traditionally provided by clinicians in a hospital setting. Growing numbers of prostate cancer survivors mean that this model of care may not be economically sustainable, and a number of alternative approaches have been suggested. The aim of this study was to develop an economic model to compare the costs of three alternative strategies for prostate cancer follow-up in Ireland-the European Association of Urology (EAU) guidelines, the National Institute of Health Care Excellence (NICE) guidelines and current practice. A cost minimisation analysis was performed using a Markov model with three arms (EAU guidelines, NICE guidelines and current practice) comparing follow-up for men with prostate cancer treated with curative intent. The model took a health care payer's perspective over a 10-year time horizon. Current practice was the least cost efficient arm of the model, the NICE guidelines were most cost efficient (74 % of current practice costs) and the EAU guidelines intermediate (92 % of current practice costs). For the 2562 new cases of prostate cancer diagnosed in 2009, the Irish health care system could have saved €760,000 over a 10-year period if the NICE guidelines were adopted. This is the first study investigating costs of prostate cancer follow-up in the Irish setting. While economic models are designed as a simplification of complex real-world situations, these results suggest potential for significant savings within the Irish health care system associated with implementation of alternative models of prostate cancer follow-up care.

A low cost computer-controlled electrochemical measurement system for education and research

International Nuclear Information System (INIS)

Cottis, R.A.

1989-01-01

With the advent of low cost computers of significant processing power, it has become economically attractive, as well as offering practical advantages, to replace conventional electrochemical instrumentation with computer-based equipment. For example, the equipment to be described can perform all of the functions required for the measurement of a potentiodynamic polarization curve, replacing the conventional arrangement of sweep generator, potentiostat and chart recorder at a cost (based on the purchase cost of parts) which is less than that of most chart recorders alone. Additionally the use of computer control at a relatively low level provides a versatility (assuming the development of suitable software) which cannot easily be matched by conventional instruments. As a result of these considerations a simple computer-controlled electrochemical measurement system has been developed, with a primary aim being its use in teaching an MSc class in corrosion science and engineering, with additional applications in MSc and PhD research. For education reasons the design of the user interface has tried to make the internal operation of the unit as obvious as possible, and thereby minimize the tendency for students to treat the unit as a 'black box' with incomprehensible inner workings. This has resulted in a unit in which the three main components of function generator, potentiostat and recorder are presented as independent areas on the front panel, and can be configured by the user in exactly the same way as conventional instruments. (author) 11 figs

A low cost computer-controlled electrochemical measurement system for education and research

Energy Technology Data Exchange (ETDEWEB)

Cottis, R A [Manchester Univ. (UK). Inst. of Science and Technology

1989-01-01

With the advent of low cost computers of significant processing power, it has become economically attractive, as well as offering practical advantages, to replace conventional electrochemical instrumentation with computer-based equipment. For example, the equipment to be described can perform all of the functions required for the measurement of a potentiodynamic polarization curve, replacing the conventional arrangement of sweep generator, potentiostat and chart recorder at a cost (based on the purchase cost of parts) which is less than that of most chart recorders alone. Additionally the use of computer control at a relatively low level provides a versatility (assuming the development of suitable software) which cannot easily be matched by conventional instruments. As a result of these considerations a simple computer-controlled electrochemical measurement system has been developed, with a primary aim being its use in teaching an MSc class in corrosion science and engineering, with additional applications in MSc and PhD research. For education reasons the design of the user interface has tried to make the internal operation of the unit as obvious as possible, and thereby minimize the tendency for students to treat the unit as a 'black box' with incomprehensible inner workings. This has resulted in a unit in which the three main components of function generator, potentiostat and recorder are presented as independent areas on the front panel, and can be configured by the user in exactly the same way as conventional instruments. (author) 11 figs.

Hospitalization costs of severe bacterial pneumonia in children: comparative analysis considering different costing methods.

Science.gov (United States)

Nunes, Sheila Elke Araujo; Minamisava, Ruth; Vieira, Maria Aparecida da Silva; Itria, Alexander; Pessoa, Vicente Porfirio; Andrade, Ana Lúcia Sampaio Sgambatti de; Toscano, Cristiana Maria

2017-01-01

To determine and compare hospitalization costs of bacterial community-acquired pneumonia cases via different costing methods under the Brazilian Public Unified Health System perspective. Cost-of-illness study based on primary data collected from a sample of 59 children aged between 28 days and 35 months and hospitalized due to bacterial pneumonia. Direct medical and non-medical costs were considered and three costing methods employed: micro-costing based on medical record review, micro-costing based on therapeutic guidelines and gross-costing based on the Brazilian Public Unified Health System reimbursement rates. Costs estimates obtained via different methods were compared using the Friedman test. Cost estimates of inpatient cases of severe pneumonia amounted to R$ 780,70/$Int. 858.7 (medical record review), R$ 641,90/$Int. 706.90 (therapeutic guidelines) and R$ 594,80/$Int. 654.28 (Brazilian Public Unified Health System reimbursement rates). Costs estimated via micro-costing (medical record review or therapeutic guidelines) did not differ significantly (p=0.405), while estimates based on reimbursement rates were significantly lower compared to estimates based on therapeutic guidelines (pmetodologias de custeio, na perspectiva do Sistema Único de Saúde. Estudo de custo, com coleta de dados primários de uma amostra de 59 crianças com 28 dias a 35 meses de idade hospitalizadas por pneumonia bacteriana. Foram considerados custos diretos médicos e não médicos. Três metodologias de custeio foram utilizadas: microcusteio por revisão de prontuários, microcusteio considerando diretriz terapêutica e macrocusteio por ressarcimento do Sistema Único de Saúde. Os custos estimados pelas diferentes metodologias foram comparados utilizando o teste de Friedman. Os custos hospitalares de crianças com pneumonia grave foram R$ 780,70 ($Int. 858.7) por revisão de prontuários, R$ 641,90 ($Int. 706.90) por diretriz terapêutica e R$ 594,80 ($Int. 654.28) por

Do Clouds Compute? A Framework for Estimating the Value of Cloud Computing

Science.gov (United States)

Klems, Markus; Nimis, Jens; Tai, Stefan

On-demand provisioning of scalable and reliable compute services, along with a cost model that charges consumers based on actual service usage, has been an objective in distributed computing research and industry for a while. Cloud Computing promises to deliver on this objective: consumers are able to rent infrastructure in the Cloud as needed, deploy applications and store data, and access them via Web protocols on a pay-per-use basis. The acceptance of Cloud Computing, however, depends on the ability for Cloud Computing providers and consumers to implement a model for business value co-creation. Therefore, a systematic approach to measure costs and benefits of Cloud Computing is needed. In this paper, we discuss the need for valuation of Cloud Computing, identify key components, and structure these components in a framework. The framework assists decision makers in estimating Cloud Computing costs and to compare these costs to conventional IT solutions. We demonstrate by means of representative use cases how our framework can be applied to real world scenarios.

Modelling the Intention to Adopt Cloud Computing Services: A Transaction Cost Theory Perspective

Directory of Open Access Journals (Sweden)

Ogan Yigitbasioglu

2014-11-01

Full Text Available This paper uses transaction cost theory to study cloud computing adoption. A model is developed and tested with data from an Australian survey. According to the results, perceived vendor opportunism and perceived legislative uncertainty around cloud computing were significantly associated with perceived cloud computing security risk. There was also a significant negative relationship between perceived cloud computing security risk and the intention to adopt cloud services. This study also reports on adoption rates of cloud computing in terms of applications, as well as the types of services used.

Personal computers in high energy physics

International Nuclear Information System (INIS)

Quarrie, D.R.

1987-01-01

The role of personal computers within HEP is expanding as their capabilities increase and their cost decreases. Already they offer greater flexibility than many low-cost graphics terminals for a comparable cost and in addition they can significantly increase the productivity of physicists and programmers. This talk will discuss existing uses for personal computers and explore possible future directions for their integration into the overall computing environment. (orig.)

Retrospective cost analysis comparing Essure hysteroscopic sterilization and laparoscopic bilateral tubal coagulation.

Science.gov (United States)

Hopkins, Matthew R; Creedon, Douglas J; Wagie, Amy E; Williams, Arthur R; Famuyide, Abimbola O

2007-01-01

To compare the institutional cost of permanent female sterilization by Essure hysteroscopic sterilization and laparoscopic bilateral coagulation. Retrospective cohort study (Canadian Task Force classification II-2). Midwestern academic medical center. Women of reproductive age who elected for permanent contraception by the Essure method (n = 43) or by laparoscopic tubal coagulation (n = 44) during the time frame studied. Placement of the Essure inserts according to the manufacturer's instructions or laparoscopic tubal sterilization using bipolar forceps according to standard techniques of open or closed laparoscopy. Cost-center data for the institutional cost of the procedure was abstracted for each patient included in the study. In addition, demographic data and procedural information were obtained and compared for the patient populations. The Essure system of hysteroscopic sterilization had a significantly decreased cost compared with laparoscopic tubal sterilization when both procedures were performed in an operating room setting. The decrease per patient in institutional cost was 180 dollars (p = .038). This included the cost of the confirmatory hysterosalpingogram 3 months after Essure placement and the cost of laparoscopic tubal occlusion by Filshie clip if the Essure micro-inserts could not be placed. The majority of the cost was related to hospital costs as opposed to physician costs. The Essure procedure had higher costs for disposable equipment (p Essure hysteroscopic sterilization had significant cost savings compared with laparoscopic tubal sterilization (p = .038). We believe that our data represent the minimum of potential savings using this approach, and future developments will only increase the cost difference found in our study.

Hospital financing: calculating inpatient capital costs in Germany with a comparative view on operating costs and the English costing scheme.

Science.gov (United States)

Vogl, Matthias

2014-04-01

The paper analyzes the German inpatient capital costing scheme by assessing its cost module calculation. The costing scheme represents the first separated national calculation of performance-oriented capital cost lump sums per DRG. The three steps in the costing scheme are reviewed and assessed: (1) accrual of capital costs; (2) cost-center and cost category accounting; (3) data processing for capital cost modules. The assessment of each step is based on its level of transparency and efficiency. A comparative view on operating costing and the English costing scheme is given. Advantages of the scheme are low participation hurdles, low calculation effort for G-DRG calculation participants, highly differentiated cost-center/cost category separation, and advanced patient-based resource allocation. The exclusion of relevant capital costs, nontransparent resource allocation, and unclear capital cost modules, limit the managerial relevance and transparency of the capital costing scheme. The scheme generates the technical premises for a change from dual financing by insurances (operating costs) and state (capital costs) to a single financing source. The new capital costing scheme will intensify the discussion on how to solve the current investment backlog in Germany and can assist regulators in other countries with the introduction of accurate capital costing. Copyright © 2014 Elsevier Ireland Ltd. All rights reserved.

Decommissioning costing approach based on the standardised list of costing items. Lessons learnt by the OMEGA computer code

International Nuclear Information System (INIS)

Daniska, Vladimir; Rehak, Ivan; Vasko, Marek; Ondra, Frantisek; Bezak, Peter; Pritrsky, Jozef; Zachar, Matej; Necas, Vladimir

2011-01-01

The document 'A Proposed Standardised List of Items for Costing Purposes' was issues in 1999 by OECD/NEA, IAEA and European Commission (EC) for promoting the harmonisation in decommissioning costing. It is a systematic list of decommissioning activities classified in chapters 01 to 11 with three numbered levels. Four cost group are defined for cost at each level. Document constitutes the standardised matrix of decommissioning activities and cost groups with definition of content of items. Knowing what is behind the items makes the comparison of cost for decommissioning projects transparent. Two approaches are identified for use of the standardised cost structure. First approach converts the cost data from existing specific cost structures into the standardised cost structure for the purpose of cost presentation. Second approach uses the standardised cost structure as the base for the cost calculation structure; the calculated cost data are formatted in the standardised cost format directly; several additional advantages may be identified in this approach. The paper presents the costing methodology based on the standardised cost structure and lessons learnt from last ten years of the implementation of the standardised cost structure as the cost calculation structure in the computer code OMEGA. Code include also on-line management of decommissioning waste, decay of radioactively, evaluation of exposure, generation and optimisation of the Gantt chart of a decommissioning project, which makes the OMEGA code an effective tool for planning and optimisation of decommissioning processes. (author)

Cost-effective computational method for radiation heat transfer in semi-crystalline polymers

Science.gov (United States)

Boztepe, Sinan; Gilblas, Rémi; de Almeida, Olivier; Le Maoult, Yannick; Schmidt, Fabrice

2018-05-01

This paper introduces a cost-effective numerical model for infrared (IR) heating of semi-crystalline polymers. For the numerical and experimental studies presented here semi-crystalline polyethylene (PE) was used. The optical properties of PE were experimentally analyzed under varying temperature and the obtained results were used as input in the numerical studies. The model was built based on optically homogeneous medium assumption whereas the strong variation in the thermo-optical properties of semi-crystalline PE under heating was taken into account. Thus, the change in the amount radiative energy absorbed by the PE medium was introduced in the model induced by its temperature-dependent thermo-optical properties. The computational study was carried out considering an iterative closed-loop computation, where the absorbed radiation was computed using an in-house developed radiation heat transfer algorithm -RAYHEAT- and the computed results was transferred into the commercial software -COMSOL Multiphysics- for solving transient heat transfer problem to predict temperature field. The predicted temperature field was used to iterate the thermo-optical properties of PE that varies under heating. In order to analyze the accuracy of the numerical model experimental analyses were carried out performing IR-thermographic measurements during the heating of the PE plate. The applicability of the model in terms of computational cost, number of numerical input and accuracy was highlighted.

An ergonomic evaluation comparing desktop, notebook, and subnotebook computers.

Science.gov (United States)

Szeto, Grace P; Lee, Raymond

2002-04-01

To evaluate and compare the postures and movements of the cervical and upper thoracic spine, the typing performance, and workstation ergonomic factors when using a desktop, notebook, and subnotebook computers. Repeated-measures design. A motion analysis laboratory with an electromagnetic tracking device. A convenience sample of 21 university students between ages 20 and 24 years with no history of neck or shoulder discomfort. Each subject performed a standardized typing task by using each of the 3 computers. Measurements during the typing task were taken at set intervals. Cervical and thoracic spines adopted a more flexed posture in using the smaller-sized computers. There were significantly greater neck movements in using desktop computers when compared with the notebook and subnotebook computers. The viewing distances adopted by the subjects decreased as the computer size decreased. Typing performance and subjective rating of difficulty in using the keyboards were also significantly different among the 3 types of computers. Computer users need to consider the posture of the spine and potential risk of developing musculoskeletal discomfort in choosing computers. Copyright 2002 by the American Congress of Rehabilitation Medicine and the American Academy of Physical Medicine and Rehabilitation

Cost-Effectiveness Analysis (CEA) of Intravenous Urography (IVU) and Unenhanced Multidetector Computed Tomography (MDCT) for Initial Investigation of Suspected Acute Ureterolithiasis

International Nuclear Information System (INIS)

Eikefjord, E.; Askildsen, J.E.; Roervik, J.

2008-01-01

Background: It is important to compare the cost and effectiveness of multidetector computed tomography (MDCT) and intravenous urography (IVU) to determine the most cost-effective alternative for the initial investigation of acute ureterolithiasis. Purpose: To analyze the task-specific variable costs combined with the diagnostic effect of MDCT and IVU for patients with acute flank pain, and to determine which is most cost effective. Material and Methods: 119 patients with acute flank pain suggestive of stone disease (ureterolithiasis) were examined by both MDCT and IVU. Variable costs related to medical equipment, consumption material, equipment control, and personnel were calculated. The diagnostic effect was assessed. Results: The variable costs of MDCT versus IVU were EUR 32 and EUR 117, respectively. This significant difference was mainly due to savings in examination time, higher annual examination frequency, lower material costs, and no use of contrast media. As for diagnostic effect, MDCT proved considerably more accurate in the diagnosis of stone disease than IVU and markedly more accurate concerning differential diagnoses. Conclusion: MDCT had lower differential costs and a higher capacity to determine correctly stone disease and differential diagnoses, as compared to IVU, in patients with acute flank pain. Consequently, MDCT is a dominant alternative to IVU when evaluated exclusively from a cost-effective perspective

Cost-effectiveness of computer-assisted training in cognitive-behavioral therapy as an adjunct to standard care for addiction.

Science.gov (United States)

Olmstead, Todd A; Ostrow, Cary D; Carroll, Kathleen M

2010-08-01

To determine the cost-effectiveness, from clinic and patient perspectives, of a computer-based version of cognitive-behavioral therapy (CBT4CBT) as an addition to regular clinical practice for substance dependence. PARTICIPANTS, DESIGN AND MEASUREMENTS: This cost-effectiveness study is based on a randomized clinical trial in which 77 individuals seeking treatment for substance dependence at an outpatient community setting were randomly assigned to treatment as usual (TAU) or TAU plus biweekly access to computer-based training in CBT (TAU plus CBT4CBT). The primary patient outcome measure was the total number of drug-free specimens provided during treatment. Incremental cost-effectiveness ratios (ICERs) and cost-effectiveness acceptability curves (CEACs) were used to determine the cost-effectiveness of TAU plus CBT4CBT relative to TAU alone. Results are presented from both the clinic and patient perspectives and are shown to be robust to (i) sensitivity analyses and (ii) a secondary objective patient outcome measure. The per patient cost of adding CBT4CBT to standard care was $39 ($27) from the clinic (patient) perspective. From the clinic (patient) perspective, TAU plus CBT4CBT is likely to be cost-effective when the threshold value to decision makers of an additional drug-free specimen is greater than approximately $21 ($15), and TAU alone is likely to be cost-effective when the threshold value is less than approximately $21 ($15). The ICERs for TAU plus CBT4CBT also compare favorably to ICERs reported elsewhere for other empirically validated therapies, including contingency management. TAU plus CBT4CBT appears to be a good value from both the clinic and patient perspectives. Copyright (c) 2010 Elsevier Ireland Ltd. All rights reserved.

Economic evaluation comparing intraoperative cone beam CT-based navigation and conventional fluoroscopy for the placement of spinal pedicle screws: a patient-level data cost-effectiveness analysis.

Science.gov (United States)

Dea, Nicolas; Fisher, Charles G; Batke, Juliet; Strelzow, Jason; Mendelsohn, Daniel; Paquette, Scott J; Kwon, Brian K; Boyd, Michael D; Dvorak, Marcel F S; Street, John T

2016-01-01

Pedicle screws are routinely used in contemporary spinal surgery. Screw misplacement may be asymptomatic but is also correlated with potential adverse events. Computer-assisted surgery (CAS) has been associated with improved screw placement accuracy rates. However, this technology has substantial acquisition and maintenance costs. Despite its increasing usage, no rigorous full economic evaluation comparing this technology to current standard of care has been reported. Medical costs are exploding in an unsustainable way. Health economic theory requires that medical equipment costs be compared with expected benefits. To answer this question for computer-assisted spinal surgery, we present an economic evaluation looking specifically at symptomatic misplaced screws leading to reoperation secondary to neurologic deficits or biomechanical concerns. The study design was an observational case-control study from prospectively collected data of consecutive patients treated with the aid of CAS (treatment group) compared with a matched historical cohort of patients treated with conventional fluoroscopy (control group). The patient sample consisted of consecutive patients treated surgically at a quaternary academic center. The primary effectiveness measure studied was the number of reoperations for misplaced screws within 1 year of the index surgery. Secondary outcome measures included were total adverse event rate and postoperative computed tomography usage for pedicle screw examination. A patient-level data cost-effectiveness analysis from the hospital perspective was conducted to determine the value of a navigation system coupled with intraoperative 3-D imaging (O-arm Imaging and the StealthStation S7 Navigation Systems, Medtronic, Louisville, CO, USA) in adult spinal surgery. The capital costs for both alternatives were reported as equivalent annual costs based on the annuitization of capital expenditures method using a 3% discount rate and a 7-year amortization period

Computational cost of isogeometric multi-frontal solvers on parallel distributed memory machines

KAUST Repository

Woźniak, Maciej; Paszyński, Maciej R.; Pardo, D.; Dalcin, Lisandro; Calo, Victor M.

2015-01-01

This paper derives theoretical estimates of the computational cost for isogeometric multi-frontal direct solver executed on parallel distributed memory machines. We show theoretically that for the Cp-1 global continuity of the isogeometric solution

Hybrid Cloud Computing Architecture Optimization by Total Cost of Ownership Criterion

Directory of Open Access Journals (Sweden)

Elena Valeryevna Makarenko

2014-12-01

Full Text Available Achieving the goals of information security is a key factor in the decision to outsource information technology and, in particular, to decide on the migration of organizational data, applications, and other resources to the infrastructure, based on cloud computing. And the key issue in the selection of optimal architecture and the subsequent migration of business applications and data to the cloud organization information environment is the question of the total cost of ownership of IT infrastructure. This paper focuses on solving the problem of minimizing the total cost of ownership cloud.

Cost-effectiveness of computed tomography colonography in colorectal cancer screening: a systematic review.

Science.gov (United States)

Hanly, Paul; Skally, Mairead; Fenlon, Helen; Sharp, Linda

2012-10-01

The European Code Against Cancer recommends individuals aged ≥ 50 should participate in colorectal cancer screening. CT-colonography (CTC) is one of several screening tests available. We systematically reviewed evidence on, and identified key factors influencing, cost-effectiveness of CTC screening. PubMed, Medline, and the Cochrane library were searched for cost-effectiveness or cost-utility analyses of CTC-based screening, published in English, January 1999 to July 2010. Data was abstracted on setting, model type and horizon, screening scenario(s), comparator(s), participants, uptake, CTC performance and cost, effectiveness, ICERs, and whether extra-colonic findings and medical complications were considered. Sixteen studies were identified from the United States (n = 11), Canada (n = 2), and France, Italy, and the United Kingdom (1 each). Markov state-transition (n = 14) or microsimulation (n = 2) models were used. Eleven considered direct medical costs only; five included indirect costs. Fourteen compared CTC with no screening; fourteen compared CTC with colonoscopy-based screening; fewer compared CTC with sigmoidoscopy (8) or fecal tests (4). Outcomes assessed were life-years gained/saved (13), QALYs (2), or both (1). Three considered extra-colonic findings; seven considered complications. CTC appeared cost-effective versus no screening and, in general, flexible sigmoidoscopy and fecal occult blood testing. Results were mixed comparing CTC to colonoscopy. Parameters most influencing cost-effectiveness included: CTC costs, screening uptake, threshold for polyp referral, and extra-colonic findings. Evidence on cost-effectiveness of CTC screening is heterogeneous, due largely to between-study differences in comparators and parameter values. Future studies should: compare CTC with currently favored tests, especially fecal immunochemical tests; consider extra-colonic findings; and conduct comprehensive sensitivity analyses.

Cost Evaluation of a Donation after Cardiac Death Program: How Cost per Organ Compares to Other Donor Types.

Science.gov (United States)

Lindemann, Jessica; Dageforde, Leigh Anne; Vachharajani, Neeta; Stahlschmidt, Emily; Brockmeier, Diane; Wellen, Jason R; Khan, Adeel; Chapman, William C; Doyle, Mb Majella

2018-05-01

Donation after cardiac death (DCD) is one method of organ donation. Nationally, more than half of evaluated DCD donors do not yield transplantable organs. There is no algorithm for predicting which DCD donors will be appropriate for organ procurement. Donation after cardiac death program costs from an organ procurement organization (OPO) accounting for all evaluated donors have not been reported. Hospital, transportation, and supply costs of potential DCD donors evaluated at a single OPO from January 2009 to June 2016 were collected. Mean costs per donor and per organ were calculated. Cost of DCD donors that did not yield a transplantable organ were included in cost analyses resulting in total cost of the DCD program. Donation after cardiac death donor costs were compared with costs of in-hospital donation after brain death (DBD) donors. There were 289 organs transplanted from 264 DCD donors evaluated. Mean cost per DCD donor yielding transplantable organs was $9,306. However, 127 donors yielded no organs, at a mean cost of $8,794 per donor. The total cost of the DCD program was $32,020 per donor and $15,179 per organ. Mean cost for an in-hospital DBD donor was $33,546 and $9,478 per organ transplanted. Mean organ yield for DBD donors was 3.54 vs 2.21 for DCD donors (p organ 63% of the cost of a DCD organ. Mean cost per DCD donor is comparable with DBD donors, however, individual cost of DCD organs increases by almost 40% when all costs of an entire DCD program are included. Published by Elsevier Inc.

Time-driven activity based costing: a comparative study with the activity based costing

Directory of Open Access Journals (Sweden)

Marina Battistella Luna

2017-06-01

Full Text Available The activity-based costing (ABC emerged in the 1980s to meet the new necessities of cost information facing companies, the result of continuous changes in the business environment. In the 2000s, a new costing method, known as time-driven activity-based costing (TDABC was introduced in order to simplify the ABC. This paper compares these methods in order to provide information to assist managers to decide which of these methods better suits the reality of their companies. Therefore, they were analyzed based on information obtained through a systematic search in the Scopus and Web of Knowledge databases, as well as papers from the annals of the Congresso Brasileiro de Custos, Congresso de Controladoria e Contabilidade da USP and Encontro Nacional de Engenharia de Produção (considering scientific papers published between 2004 and 2016. From this analysis, in most cases it was concluded that TDABC is a simpler and more practical option than ABC. However, it was also apparent that managers, before choosing a particular method, must verify whether the conditions that enable its applicability exist.

The Cost of Joint Replacement: Comparing Two Approaches to Evaluating Costs of Total Hip and Knee Arthroplasty.

Science.gov (United States)

Palsis, John A; Brehmer, Thomas S; Pellegrini, Vincent D; Drew, Jacob M; Sachs, Barton L

2018-02-21

In an era of mandatory bundled payments for total joint replacement, accurate analysis of the cost of procedures is essential for orthopaedic surgeons and their institutions to maintain viable practices. The purpose of this study was to compare traditional accounting and time-driven activity-based costing (TDABC) methods for estimating the total costs of total hip and knee arthroplasty care cycles. We calculated the overall costs of elective primary total hip and total knee replacement care cycles at our academic medical center using traditional and TDABC accounting methods. We compared the methods with respect to the overall costs of hip and knee replacement and the costs for each major cost category. The traditional accounting method resulted in higher cost estimates. The total cost per hip replacement was $22,076 (2014 USD) using traditional accounting and was $12,957 using TDABC. The total cost per knee replacement was $29,488 using traditional accounting and was $16,981 using TDABC. With respect to cost categories, estimates using traditional accounting were greater for hip and knee replacement, respectively, by $3,432 and $5,486 for personnel, by $3,398 and $3,664 for space and equipment, and by $2,289 and $3,357 for indirect costs. Implants and consumables were derived from the actual hospital purchase price; accordingly, both methods produced equivalent results. Substantial cost differences exist between accounting methods. The focus of TDABC only on resources used directly by the patient contrasts with the allocation of all operating costs, including all indirect costs and unused capacity, with traditional accounting. We expect that the true costs of hip and knee replacement care cycles are likely somewhere between estimates derived from traditional accounting methods and TDABC. TDABC offers patient-level granular cost information that better serves in the redesign of care pathways and may lead to more strategic resource-allocation decisions to optimize

The cost-effectiveness of the RSI QuickScan intervention programme for computer workers: Results of an economic evaluation alongside a randomised controlled trial.

Science.gov (United States)

Speklé, Erwin M; Heinrich, Judith; Hoozemans, Marco J M; Blatter, Birgitte M; van der Beek, Allard J; van Dieën, Jaap H; van Tulder, Maurits W

2010-11-11

The costs of arm, shoulder and neck symptoms are high. In order to decrease these costs employers implement interventions aimed at reducing these symptoms. One frequently used intervention is the RSI QuickScan intervention programme. It establishes a risk profile of the target population and subsequently advises interventions following a decision tree based on that risk profile. The purpose of this study was to perform an economic evaluation, from both the societal and companies' perspective, of the RSI QuickScan intervention programme for computer workers. In this study, effectiveness was defined at three levels: exposure to risk factors, prevalence of arm, shoulder and neck symptoms, and days of sick leave. The economic evaluation was conducted alongside a randomised controlled trial (RCT). Participating computer workers from 7 companies (N = 638) were assigned to either the intervention group (N = 320) or the usual care group (N = 318) by means of cluster randomisation (N = 50). The intervention consisted of a tailor-made programme, based on a previously established risk profile. At baseline, 6 and 12 month follow-up, the participants completed the RSI QuickScan questionnaire. Analyses to estimate the effect of the intervention were done according to the intention-to-treat principle. To compare costs between groups, confidence intervals for cost differences were computed by bias-corrected and accelerated bootstrapping. The mean intervention costs, paid by the employer, were 59 euro per participant in the intervention and 28 euro in the usual care group. Mean total health care and non-health care costs per participant were 108 euro in both groups. As to the cost-effectiveness, improvement in received information on healthy computer use as well as in their work posture and movement was observed at higher costs. With regard to the other risk factors, symptoms and sick leave, only small and non-significant effects were found. In this study, the RSI Quick

Comparison between low-cost marker-less and high-end marker-based motion capture systems for the computer-aided assessment of working ergonomics.

Science.gov (United States)

Patrizi, Alfredo; Pennestrì, Ettore; Valentini, Pier Paolo

2016-01-01

The paper deals with the comparison between a high-end marker-based acquisition system and a low-cost marker-less methodology for the assessment of the human posture during working tasks. The low-cost methodology is based on the use of a single Microsoft Kinect V1 device. The high-end acquisition system is the BTS SMART that requires the use of reflective markers to be placed on the subject's body. Three practical working activities involving object lifting and displacement have been investigated. The operational risk has been evaluated according to the lifting equation proposed by the American National Institute for Occupational Safety and Health. The results of the study show that the risk multipliers computed from the two acquisition methodologies are very close for all the analysed activities. In agreement to this outcome, the marker-less methodology based on the Microsoft Kinect V1 device seems very promising to promote the dissemination of computer-aided assessment of ergonomics while maintaining good accuracy and affordable costs. PRACTITIONER’S SUMMARY: The study is motivated by the increasing interest for on-site working ergonomics assessment. We compared a low-cost marker-less methodology with a high-end marker-based system. We tested them on three different working tasks, assessing the working risk of lifting loads. The two methodologies showed comparable precision in all the investigations.

Development of a computer program for the cost analysis of spent fuel management

International Nuclear Information System (INIS)

Choi, Heui Joo; Lee, Jong Youl; Choi, Jong Won; Cha, Jeong Hun; Whang, Joo Ho

2009-01-01

So far, a substantial amount of spent fuels have been generated from the PWR and CANDU reactors. They are being temporarily stored at the nuclear power plant sites. It is expected that the temporary storage facility will be full of spent fuels by around 2016. The government plans to solve the problem by constructing an interim storage facility soon. The radioactive management act was enacted in 2008 to manage the spent fuels safety in Korea. According to the act, the radioactive waste management fund which will be used for the transportation, interim storage, and the final disposal of spent fuels has been established. The cost for the management of spent fuels is surprisingly high and could include a lot of uncertainty. KAERI and Kyunghee University have developed cost estimation tools to evaluate the cost for a spent fuel management based on an engineering design and calculation. It is not easy to develop a tool for a cost estimation under the situation that the national policy on a spent fuel management has not yet been fixed at all. Thus, the current version of the computer program is based on the current conceptual design of each management system. The main purpose of this paper is to introduce the computer program developed for the cost analysis of a spent fuel management. In order to show the application of the program, a spent fuel management scenario is prepared, and the cost for the scenario is estimated

Comparative evaluation of activity-based costing and variable costing: a case study at IPEN

International Nuclear Information System (INIS)

Esteves, Josefina Maria da Silva SILVA

2010-01-01

This research aims to compare the results with the application of Activity Based Costing and Variable Costing methods in an administrative unit of the Brazilian Federal Government: the Radiopharmacy Facility of IPEN (Institute for Energy and Nuclear Research), which produces radiopharmaceuticals products and develops R and D activities. Faced with the need to adopt a more economical and managerial public administration, this research has provided information to assess which of the two costing methods proves more suitable for cost management in that unit. The research is exploratory and a single-case study. We traced about 80% of material costs by observation 'in loco' of the entire manufacturing process of technetium generator, which represents the main product in terms of production volume and revenues. The results show that the Contribution Margin Variable Costing of 29.12% is very close to the operating income of 28.86%, ahead of support activities, obtained by ABC. It is also noted that the operational result of the product does not change by using either one or another costing method. In the two costing methods the end result is 24.20%. This occurs because the production is on demand. There is no inventory of finished product because it is radioactive. The research has revealed that both methods provide useful information for the management and optimization of costs and results of processes/activities, and that the two methods, in this case, may be used in an integrated and complementary approach, enabling to use the best information content of both. (author)

Performance Assessment of a Custom, Portable, and Low-Cost Brain-Computer Interface Platform.

Science.gov (United States)

McCrimmon, Colin M; Fu, Jonathan Lee; Wang, Ming; Lopes, Lucas Silva; Wang, Po T; Karimi-Bidhendi, Alireza; Liu, Charles Y; Heydari, Payam; Nenadic, Zoran; Do, An Hong

2017-10-01

Conventional brain-computer interfaces (BCIs) are often expensive, complex to operate, and lack portability, which confines their use to laboratory settings. Portable, inexpensive BCIs can mitigate these problems, but it remains unclear whether their low-cost design compromises their performance. Therefore, we developed a portable, low-cost BCI and compared its performance to that of a conventional BCI. The BCI was assembled by integrating a custom electroencephalogram (EEG) amplifier with an open-source microcontroller and a touchscreen. The function of the amplifier was first validated against a commercial bioamplifier, followed by a head-to-head comparison between the custom BCI (using four EEG channels) and a conventional 32-channel BCI. Specifically, five able-bodied subjects were cued to alternate between hand opening/closing and remaining motionless while the BCI decoded their movement state in real time and provided visual feedback through a light emitting diode. Subjects repeated the above task for a total of 10 trials, and were unaware of which system was being used. The performance in each trial was defined as the temporal correlation between the cues and the decoded states. The EEG data simultaneously acquired with the custom and commercial amplifiers were visually similar and highly correlated ( ρ = 0.79). The decoding performances of the custom and conventional BCIs averaged across trials and subjects were 0.70 ± 0.12 and 0.68 ± 0.10, respectively, and were not significantly different. The performance of our portable, low-cost BCI is comparable to that of the conventional BCIs. Platforms, such as the one developed here, are suitable for BCI applications outside of a laboratory.

A Performance/Cost Evaluation for a GPU-Based Drug Discovery Application on Volunteer Computing

Science.gov (United States)

Guerrero, Ginés D.; Imbernón, Baldomero; García, José M.

2014-01-01

Bioinformatics is an interdisciplinary research field that develops tools for the analysis of large biological databases, and, thus, the use of high performance computing (HPC) platforms is mandatory for the generation of useful biological knowledge. The latest generation of graphics processing units (GPUs) has democratized the use of HPC as they push desktop computers to cluster-level performance. Many applications within this field have been developed to leverage these powerful and low-cost architectures. However, these applications still need to scale to larger GPU-based systems to enable remarkable advances in the fields of healthcare, drug discovery, genome research, etc. The inclusion of GPUs in HPC systems exacerbates power and temperature issues, increasing the total cost of ownership (TCO). This paper explores the benefits of volunteer computing to scale bioinformatics applications as an alternative to own large GPU-based local infrastructures. We use as a benchmark a GPU-based drug discovery application called BINDSURF that their computational requirements go beyond a single desktop machine. Volunteer computing is presented as a cheap and valid HPC system for those bioinformatics applications that need to process huge amounts of data and where the response time is not a critical factor. PMID:25025055

Assessing Tax Form Distribution Costs: A Proposed Method for Computing the Dollar Value of Tax Form Distribution in a Public Library.

Science.gov (United States)

Casey, James B.

1998-01-01

Explains how a public library can compute the actual cost of distributing tax forms to the public by listing all direct and indirect costs and demonstrating the formulae and necessary computations. Supplies directions for calculating costs involved for all levels of staff as well as associated public relations efforts, space, and utility costs.…

Comparing cost of indwelling pleural catheter vs talc pleurodesis for malignant pleural effusion.

Science.gov (United States)

Penz, Erika D; Mishra, Eleanor K; Davies, Helen E; Manns, Braden J; Miller, Robert F; Rahman, Najib M

2014-10-01

Malignant pleural effusion is associated with short life expectancy and significant morbidity. A randomized controlled trial comparing indwelling pleural catheters (IPCs) with talc pleurodesis found that IPCs reduced in-hospital time and the need for additional procedures but were associated with excess adverse events. Using data from the clinical trial, we compared costs associated with use of IPCs and with talc pleurodesis. Resource use and adverse events were captured through case report forms over the 1-year trial follow-up. Costs for outpatient and inpatient visits, diagnostic imaging, nursing, and doctor time were obtained from the UK National Health Service reference costs and University of Kent's Unit Costs of Health and Social Care 2011 and inflated to 2013 using the UK Consumer Price Index. Procedure supply costs were obtained from the manufacturer. Difference in mean costs was compared using nonparametric bootstrapping. All costs were converted to US dollars using the Organisation for Economic Co-operation and Development Purchasing Power Parity Index. Overall mean cost (SD) for managing patients with IPCs and talc pleurodesis was $4,993 ($5,529) and $4,581 ($4,359), respectively. The incremental mean cost difference was $401, with 95% CI of -$1,387 to $2,261. The mean cost related to ongoing drainage in the IPC group was $1,011 ($732) vs $57 ($213) in the talc pleurodesis group (P = .001). This included the cost of drainage bottles, dressing changes in the first month, and catheter removal. There was no significant difference in cost of the initial intervention or adverse events between the groups. For patients with survival < 14 weeks, IPC is significantly less costly than talc pleurodesis, with mean cost difference of -$1,719 (95% CI, -$3,376 to -$85). There is no significant difference in the mean cost of managing patients with IPCs compared with talc pleurodesis. For patients with limited survival, IPC appears less costly. isrctn.org; No.: ISRCTN

A method for quantifying and comparing the costs and benefits of alternative riparian zone buffer widths

Science.gov (United States)

Chris B. LeDoux; Ethel Wilkerson

2008-01-01

We developed a method that can be used to quantify the opportunity costs and ecological benefits of implementing alternative streamside management zones/buffer zone widths. The opportunity costs are computed based on the net value of the timber left behind in the buffer zone, the stump-to-mill logging costs for the logging technology that would have been used to...

Specialty and full-service hospitals: a comparative cost analysis.

Science.gov (United States)

Carey, Kathleen; Burgess, James F; Young, Gary J

2008-10-01

To compare the costs of physician-owned cardiac, orthopedic, and surgical single specialty hospitals with those of full-service hospital competitors. The primary data sources are the Medicare Cost Reports for 1998-2004 and hospital inpatient discharge data for three of the states where single specialty hospitals are most prevalent, Texas, California, and Arizona. The latter were obtained from the Texas Department of State Health Services, the California Office of Statewide Health Planning and Development, and the Agency for Healthcare Research and Quality Healthcare Cost and Utilization Project. Additional data comes from the American Hospital Association Annual Survey Database. We identified all physician-owned cardiac, orthopedic, and surgical specialty hospitals in these three states as well as all full-service acute care hospitals serving the same market areas, defined using Dartmouth Hospital Referral Regions. We estimated a hospital cost function using stochastic frontier regression analysis, and generated hospital specific inefficiency measures. Application of t-tests of significance compared the inefficiency measures of specialty hospitals with those of full-service hospitals to make general comparisons between these classes of hospitals. Results do not provide evidence that specialty hospitals are more efficient than the full-service hospitals with whom they compete. In particular, orthopedic and surgical specialty hospitals appear to have significantly higher levels of cost inefficiency. Cardiac hospitals, however, do not appear to be different from competitors in this respect. Policymakers should not embrace the assumption that physician-owned specialty hospitals produce patient care more efficiently than their full-service hospital competitors.

A nearly-linear computational-cost scheme for the forward dynamics of an N-body pendulum

Science.gov (United States)

Chou, Jack C. K.

1989-01-01

The dynamic equations of motion of an n-body pendulum with spherical joints are derived to be a mixed system of differential and algebraic equations (DAE's). The DAE's are kept in implicit form to save arithmetic and preserve the sparsity of the system and are solved by the robust implicit integration method. At each solution point, the predicted solution is corrected to its exact solution within given tolerance using Newton's iterative method. For each iteration, a linear system of the form J delta X = E has to be solved. The computational cost for solving this linear system directly by LU factorization is O(n exp 3), and it can be reduced significantly by exploring the structure of J. It is shown that by recognizing the recursive patterns and exploiting the sparsity of the system the multiplicative and additive computational costs for solving J delta X = E are O(n) and O(n exp 2), respectively. The formulation and solution method for an n-body pendulum is presented. The computational cost is shown to be nearly linearly proportional to the number of bodies.

A precise goniometer/tensiometer using a low cost single-board computer

Science.gov (United States)

Favier, Benoit; Chamakos, Nikolaos T.; Papathanasiou, Athanasios G.

2017-12-01

Measuring the surface tension and the Young contact angle of a droplet is extremely important for many industrial applications. Here, considering the booming interest for small and cheap but precise experimental instruments, we have constructed a low-cost contact angle goniometer/tensiometer, based on a single-board computer (Raspberry Pi). The device runs an axisymmetric drop shape analysis (ADSA) algorithm written in Python. The code, here named DropToolKit, was developed in-house. We initially present the mathematical framework of our algorithm and then we validate our software tool against other well-established ADSA packages, including the commercial ramé-hart DROPimage Advanced as well as the DropAnalysis plugin in ImageJ. After successfully testing for various combinations of liquids and solid surfaces, we concluded that our prototype device would be highly beneficial for industrial applications as well as for scientific research in wetting phenomena compared to the commercial solutions.

The cognitive dynamics of computer science cost-effective large scale software development

CERN Document Server

De Gyurky, Szabolcs Michael; John Wiley & Sons

2006-01-01

This book has three major objectives: To propose an ontology for computer software; To provide a methodology for development of large software systems to cost and schedule that is based on the ontology; To offer an alternative vision regarding the development of truly autonomous systems.

Is computer aided detection (CAD) cost effective in screening mammography? A model based on the CADET II study

Science.gov (United States)

2011-01-01

Background Single reading with computer aided detection (CAD) is an alternative to double reading for detecting cancer in screening mammograms. The aim of this study is to investigate whether the use of a single reader with CAD is more cost-effective than double reading. Methods Based on data from the CADET II study, the cost-effectiveness of single reading with CAD versus double reading was measured in terms of cost per cancer detected. Cost (Pound (£), year 2007/08) of single reading with CAD versus double reading was estimated assuming a health and social service perspective and a 7 year time horizon. As the equipment cost varies according to the unit size a separate analysis was conducted for high, average and low volume screening units. One-way sensitivity analyses were performed by varying the reading time, equipment and assessment cost, recall rate and reader qualification. Results CAD is cost increasing for all sizes of screening unit. The introduction of CAD is cost-increasing compared to double reading because the cost of CAD equipment, staff training and the higher assessment cost associated with CAD are greater than the saving in reading costs. The introduction of single reading with CAD, in place of double reading, would produce an additional cost of £227 and £253 per 1,000 women screened in high and average volume units respectively. In low volume screening units, the high cost of purchasing the equipment will results in an additional cost of £590 per 1,000 women screened. One-way sensitivity analysis showed that the factors having the greatest effect on the cost-effectiveness of CAD with single reading compared with double reading were the reading time and the reader's professional qualification (radiologist versus advanced practitioner). Conclusions Without improvements in CAD effectiveness (e.g. a decrease in the recall rate) CAD is unlikely to be a cost effective alternative to double reading for mammography screening in UK. This study

Comparative life-cycle cost analysis for low-level mixed waste remediation alternatives

International Nuclear Information System (INIS)

Jackson, J.A.; White, T.P.; Kloeber, J.M.; Toland, R.J.; Cain, J.P.; Buitrago, D.Y.

1995-03-01

The purpose of this study is two-fold: (1) to develop a generic, life-cycle cost model for evaluating low-level, mixed waste remediation alternatives, and (2) to apply the model specifically, to estimate remediation costs for a site similar to the Fernald Environmental Management Project near Cincinnati, OH. Life-cycle costs for vitrification, cementation, and dry removal process technologies are estimated. Since vitrification is in a conceptual phase, computer simulation is used to help characterize the support infrastructure of a large scale vitrification plant. Cost estimating relationships obtained from the simulation data, previous cost estimates, available process data, engineering judgment, and expert opinion all provide input to an Excel based spreadsheet for generating cash flow streams. Crystal Ball, an Excel add-on, was used for discounting cash flows for net present value analysis. The resulting LCC data was then analyzed using multi-attribute decision analysis techniques with cost and remediation time as criteria. The analytical framework presented allows alternatives to be evaluated in the context of budgetary, social, and political considerations. In general, the longer the remediation takes, the lower the net present value of the process. This is true because of the time value of money and large percentage of the costs attributed to storage or disposal

Cost-effective computations with boundary interface operators in elliptic problems

International Nuclear Information System (INIS)

Khoromskij, B.N.; Mazurkevich, G.E.; Nikonov, E.G.

1993-01-01

The numerical algorithm for fast computations with interface operators associated with the elliptic boundary value problems (BVP) defined on step-type domains is presented. The algorithm is based on the asymptotically almost optimal technique developed for treatment of the discrete Poincare-Steklov (PS) operators associated with the finite-difference Laplacian on rectangles when using the uniform grid with a 'displacement by h/2'. The approach can be regarded as an extension of the method proposed for the partial solution of the finite-difference Laplace equation to the case of displaced grids and mixed boundary conditions. It is shown that the action of the PS operator for the Dirichlet problem and mixed BVP can be computed with expenses of the order of O(Nlog 2 N) both for arithmetical operations and computer memory needs, where N is the number of unknowns on the rectangle boundary. The single domain algorithm is applied to solving the multidomain elliptic interface problems with piecewise constant coefficients. The numerical experiments presented confirm almost linear growth of the computational costs and memory needs with respect to the dimension of the discrete interface problem. 14 refs., 3 figs., 4 tabs

A Performance/Cost Evaluation for a GPU-Based Drug Discovery Application on Volunteer Computing

Directory of Open Access Journals (Sweden)

Ginés D. Guerrero

2014-01-01

Full Text Available Bioinformatics is an interdisciplinary research field that develops tools for the analysis of large biological databases, and, thus, the use of high performance computing (HPC platforms is mandatory for the generation of useful biological knowledge. The latest generation of graphics processing units (GPUs has democratized the use of HPC as they push desktop computers to cluster-level performance. Many applications within this field have been developed to leverage these powerful and low-cost architectures. However, these applications still need to scale to larger GPU-based systems to enable remarkable advances in the fields of healthcare, drug discovery, genome research, etc. The inclusion of GPUs in HPC systems exacerbates power and temperature issues, increasing the total cost of ownership (TCO. This paper explores the benefits of volunteer computing to scale bioinformatics applications as an alternative to own large GPU-based local infrastructures. We use as a benchmark a GPU-based drug discovery application called BINDSURF that their computational requirements go beyond a single desktop machine. Volunteer computing is presented as a cheap and valid HPC system for those bioinformatics applications that need to process huge amounts of data and where the response time is not a critical factor.

Comparing systems for costing hospital treatments. The case of stable angina pectoris.

Science.gov (United States)

Larsen, Jytte; Skjoldborg, Ulla Slothuus

2004-03-01

This paper demonstrates the basic properties in the systems most commonly considered for costing treatments in the Danish hospitals. The differences between the traditional charge system, the DRG system and the ABC system are analysed, and difficulties encountered in comparing these systems are discussed. A sample of patients diagnosed with stable angina pectoris (SAP) at Odense University Hospital was used to compare the three systems when costing an entire treatment path, costing single hospitalisations and studying the effects of length of stay. Furthermore, it is illustrated that the main idea behind each system is reflected in how the systems over- or underestimate costs. Implications when managing the hospitals, particularly reimbursement, are discussed.

Computational Comparison of Several Greedy Algorithms for the Minimum Cost Perfect Matching Problem on Large Graphs

DEFF Research Database (Denmark)

Wøhlk, Sanne; Laporte, Gilbert

2017-01-01

The aim of this paper is to computationally compare several algorithms for the Minimum Cost Perfect Matching Problem on an undirected complete graph. Our work is motivated by the need to solve large instances of the Capacitated Arc Routing Problem (CARP) arising in the optimization of garbage...... collection in Denmark. Common heuristics for the CARP involve the optimal matching of the odd-degree nodes of a graph. The algorithms used in the comparison include the CPLEX solution of an exact formulation, the LEDA matching algorithm, a recent implementation of the Blossom algorithm, as well as six...

Comparative costs and benefits of hydrogen vehicles

Energy Technology Data Exchange (ETDEWEB)

Berry, G.D. [Lawrence Livermore National Lab., CA (United States)

1996-10-01

The costs and benefits of hydrogen as a vehicle fuel are compared to gasoline, natural gas, and battery-powered vehicles. Costs, energy, efficiency, and tail-pipe and full fuel cycle emissions of air pollutants and greenhouse gases were estimated for hydrogen from a broad range of delivery pathways and scales: from individual vehicle refueling systems to large stations refueling 300 cars/day. Hydrogen production from natural gas, methanol, and ammonia, as well as water electrolysis based on alkaline or polymer electrolytes and steam electrolysis using solid oxide electrolytes are considered. These estimates were compared to estimates for competing fuels and vehicles, and used to construct oil use, air pollutant, and greenhouse gas emission scenarios for the U.S. passenger car fleet from 2005-2050. Fuel costs need not be an overriding concern in evaluating the suitability of hydrogen as a fuel for passenger vehicles. The combined emissions and oil import reduction benefits of hydrogen cars are estimated to be significant, valued at up to {approximately}$400/yr for each hydrogen car when primarily clean energy sources are used for hydrogen production. These benefits alone, however, become tenuous as the basis supporting a compelling rationale for hydrogen fueled vehicles, if efficient, advanced fossil-fuel hybrid electric vehicles (HEV`s) can achieve actual on-road emissions at or below ULEV standards in the 2005-2015 timeframe. It appears a robust rationale for hydrogen fuel and vehicles will need to also consider unique, strategic, and long-range benefits of hydrogen vehicles which can be achieved through the use of production, storage, delivery, and utilization methods for hydrogen which are unique among fuels: efficient use of intermittent renewable energy sources, (e,g, wind, solar), small-scale feasibility, fuel production at or near the point of use, electrolytic production, diverse storage technologies, and electrochemical conversion to electricity.

Low-cost addition-subtraction sequences for the final exponentiation computation in pairings

DEFF Research Database (Denmark)

Guzmán-Trampe, Juan E; Cruz-Cortéz, Nareli; Dominguez Perez, Luis

2014-01-01

In this paper, we address the problem of finding low cost addition–subtraction sequences for situations where a doubling step is significantly cheaper than a non-doubling one. One application of this setting appears in the computation of the final exponentiation step of the reduced Tate pairing d...

Comparing fixation used for calcaneal displacement osteotomies: a look at removal rates and cost.

Science.gov (United States)

Lucas, Douglas E; Simpson, G Alex; Philbin, Terrence M

2015-02-01

The calcaneal displacement osteotomy is a procedure frequently used by foot and ankle surgeons for hindfoot angular deformity. Traditional techniques use compression screw fixation that can result in prominent hardware. While the results of the procedure are generally good, a common concern is the development of plantar heel pain related to prominent hardware. The primary purpose of this study is to retrospectively compare clinical outcomes of 2 fixation methods for the osteotomy. Secondarily a cost analysis will compare implant costs to hardware removal costs. Records were reviewed for patients who had undergone a calcaneal displacement osteotomy fixated with either lag screw or a locked lateral compression plate (LLCP). Neuropathy, previous ipsilateral calcaneus surgery, heel pad trauma, or incomplete radiographic follow-up were exclusionary. Thirty-two patients (19.4%) required hardware removal from the screw fixation group compared to 1 (1.6%) of the LLCP group, which is significant (P cost was remarkably different with screw fixation costing on average $247.12, compared to the LLCP costing $1175.59. Although the LLCP cost was significantly higher, cost savings were identified when the cost of removal and removal rates were included. This study demonstrates that this device provides adequate stabilization for healing in equivalent time to screw fixation. The LLCP required decreased rates of hardware removal with fewer postoperative visits over a shorter period of time. Significant savings were demonstrated in the LLCP group despite the higher implant cost. Therapeutic, Level III, Retrospective Comparative Study. © 2014 The Author(s).

12 CFR Appendix K to Part 226 - Total Annual Loan Cost Rate Computations for Reverse Mortgage Transactions

Science.gov (United States)

2010-01-01

... Appendix K to Part 226—Total Annual Loan Cost Rate Computations for Reverse Mortgage Transactions (a... loan cost rate for various transactions, as well as instructions, explanations, and examples for.... (2) Term of the transaction. For purposes of total annual loan cost disclosures, the term of a...

Suspected acute pulmonary emboli: cost-effectiveness of chest helical computed tomography versus a standard diagnostic algorithm incorporating ventilation-perfusion scintigraphy

International Nuclear Information System (INIS)

Larcos, G.; Chi, K.K.G.; Berry, G.; Westmead Hospital, Sydney, NSW; Shiell, A.

2000-01-01

There is a controversy regarding the investigation of patients with suspected acute pulmonary embolism (PE). To compare the cost-effectiveness of alternative methods of diagnosing acute PE, chest helical computed tomography (CT) alone and in combination with venous ultrasound (US) of legs and pulmonary angiography (PA) were compared to a conventional algorithm using ventilation-perfusion (V/Q) scintigraphy supplemented in selected cases by US and PA. A decision-analytical model was constructed to model the costs and effects of the three diagnostic strategies in a hypothetical cohort of 1000 patients each. Transition probabilities were based on published data. Life years gained by each strategy were estimated from published mortality rates. Schedule fees were used to estimate costs. The V/Q protocol is both more expensive and more effective than CT alone resulting in 20.1 additional lives saved at a (discounted) cost of $940 per life year gained. An additional 2.5 lives can be saved if CT replaces V/Q scintigraphy in the diagnostic algorithm but at a cost of $23,905 per life year saved. It resulted that the more effective diagnostic strategies are also more expensive. In patients with suspected PE, the incremental cost-effectiveness of the V/Q based strategy over CT alone is reasonable in comparison with other health interventions. The cost-effectiveness of the supplemented CT strategy is more questionable. Copyright (2000) The Australasian College of Physicians

The Global Economic Cost of Osteoarthritis: How the UK Compares

Directory of Open Access Journals (Sweden)

A. Chen

2012-01-01

Full Text Available Aims. To examine all relevant literature on the economic costs of osteoarthritis in the UK, and to compare such costs globally. Methods. A search of MEDLINE was performed. The search was expanded beyond peer-reviewed journals into publications by the department of health, national orthopaedic associations, national authorities and registries, and arthritis charities. Results. No UK studies were identified in the literature search. 3 European, 6 North American, and 2 Asian studies were reviewed. Significant variation in direct and indirect costs were seen in these studies. Costs for topical and oral NSAIDs were estimated to be £19.2 million and £25.65 million, respectively. Cost of hip and knee replacements was estimated to exceed £850 million, arthroscopic surgery for osteoarthritis was estimated to be £1.34 million. Indirect costs from OA caused a loss of economic production over £3.2 billion, £43 million was spent on community services and £215 million on social services for osteoarthritis. Conclusions. While estimates of economic costs can be made using information from non-published data, there remains a lack of original research looking at the direct or indirect costs of osteoarthritis in the UK. Differing methodology in calculating costs from overseas studies makes direct comparison with the UK difficult.

United States comparative costs and absenteeism of diabetic ophthalmic conditions.

Science.gov (United States)

Brook, Richard A; Kleinman, Nathan L; Patel, Sunil; Smeeding, Jim E; Beren, Ian A; Turpcu, Adam

2015-06-01

This retrospective cohort study examined the impact of diabetic macular edema (DME), diabetic retinopathy (DR), or diabetes on annual health benefit costs and absenteeism in US employees. Claims data from 2001 to 2012 was extracted from the Human Capital Management Services Group Research Reference Database on annual direct/indirect health benefit costs and absences for employees aged ≥ 18 years. Employees with DME, DR, or diabetes were identified by International Classification of Diseases, Ninth Revision, Clinical Modification codes. Employees were divided into two groups, drivers or nondrivers, and examined in separate analyses. For drivers and nondrivers, the DME, DR, and diabetes cohorts were compared with their respective control groups (without diabetes). Two-part regression models controlled for demographics and job-related characteristics. A total of 39,702 driver and 426,549 nondriver employees were identified as having ≥ 1 year's continuous health plan enrollment. Direct medical costs for drivers with DME, DR, or diabetes were $6470, $8021, and $5102, respectively (>2.8 times higher and statistically significant compared with driver controls). Nondrivers with DME and DR incurred significantly higher sick leave and short-term disability costs compared with the nondrivers with diabetes and nondriver controls. In drivers with DME, the majority of days of absence were for short- and long-term disability (12.41 and 11.43 days, respectively). In drivers with DR, the majority of days of absence were for short-term disability (10.70 days). In nondrivers with DME and nondrivers with DR, the majority of days of absence were for sick leave (5.74 and 4.93 days, respectively) and short-term disability (5.08 and 4.93 days, respectively). DME and DR are associated with substantial direct medical cost and absenteeism in this real-world sample of medically insured employees. This research highlights the negative impact of DME and DR on annual costs and absenteeism

User manual for PACTOLUS: a code for computing power costs.

Energy Technology Data Exchange (ETDEWEB)

Huber, H.D.; Bloomster, C.H.

1979-02-01

PACTOLUS is a computer code for calculating the cost of generating electricity. Through appropriate definition of the input data, PACTOLUS can calculate the cost of generating electricity from a wide variety of power plants, including nuclear, fossil, geothermal, solar, and other types of advanced energy systems. The purpose of PACTOLUS is to develop cash flows and calculate the unit busbar power cost (mills/kWh) over the entire life of a power plant. The cash flow information is calculated by two principal models: the Fuel Model and the Discounted Cash Flow Model. The Fuel Model is an engineering cost model which calculates the cash flow for the fuel cycle costs over the project lifetime based on input data defining the fuel material requirements, the unit costs of fuel materials and processes, the process lead and lag times, and the schedule of the capacity factor for the plant. For nuclear plants, the Fuel Model calculates the cash flow for the entire nuclear fuel cycle. For fossil plants, the Fuel Model calculates the cash flow for the fossil fuel purchases. The Discounted Cash Flow Model combines the fuel costs generated by the Fuel Model with input data on the capital costs, capital structure, licensing time, construction time, rates of return on capital, tax rates, operating costs, and depreciation method of the plant to calculate the cash flow for the entire lifetime of the project. The financial and tax structure for both investor-owned utilities and municipal utilities can be simulated through varying the rates of return on equity and debt, the debt-equity ratios, and tax rates. The Discounted Cash Flow Model uses the principal that the present worth of the revenues will be equal to the present worth of the expenses including the return on investment over the economic life of the project. This manual explains how to prepare the input data, execute cases, and interpret the output results. (RWR)

User manual for PACTOLUS: a code for computing power costs

International Nuclear Information System (INIS)

Huber, H.D.; Bloomster, C.H.

1979-02-01

PACTOLUS is a computer code for calculating the cost of generating electricity. Through appropriate definition of the input data, PACTOLUS can calculate the cost of generating electricity from a wide variety of power plants, including nuclear, fossil, geothermal, solar, and other types of advanced energy systems. The purpose of PACTOLUS is to develop cash flows and calculate the unit busbar power cost (mills/kWh) over the entire life of a power plant. The cash flow information is calculated by two principal models: the Fuel Model and the Discounted Cash Flow Model. The Fuel Model is an engineering cost model which calculates the cash flow for the fuel cycle costs over the project lifetime based on input data defining the fuel material requirements, the unit costs of fuel materials and processes, the process lead and lag times, and the schedule of the capacity factor for the plant. For nuclear plants, the Fuel Model calculates the cash flow for the entire nuclear fuel cycle. For fossil plants, the Fuel Model calculates the cash flow for the fossil fuel purchases. The Discounted Cash Flow Model combines the fuel costs generated by the Fuel Model with input data on the capital costs, capital structure, licensing time, construction time, rates of return on capital, tax rates, operating costs, and depreciation method of the plant to calculate the cash flow for the entire lifetime of the project. The financial and tax structure for both investor-owned utilities and municipal utilities can be simulated through varying the rates of return on equity and debt, the debt-equity ratios, and tax rates. The Discounted Cash Flow Model uses the principal that the present worth of the revenues will be equal to the present worth of the expenses including the return on investment over the economic life of the project. This manual explains how to prepare the input data, execute cases, and interpret the output results with the updated version of PACTOLUS. 11 figures, 2 tables

Comparing Methods for Estimating Direct Costs of Adverse Drug Events.

Science.gov (United States)

Gyllensten, Hanna; Jönsson, Anna K; Hakkarainen, Katja M; Svensson, Staffan; Hägg, Staffan; Rehnberg, Clas

2017-12-01

To estimate how direct health care costs resulting from adverse drug events (ADEs) and cost distribution are affected by methodological decisions regarding identification of ADEs, assigning relevant resource use to ADEs, and estimating costs for the assigned resources. ADEs were identified from medical records and diagnostic codes for a random sample of 4970 Swedish adults during a 3-month study period in 2008 and were assessed for causality. Results were compared for five cost evaluation methods, including different methods for identifying ADEs, assigning resource use to ADEs, and for estimating costs for the assigned resources (resource use method, proportion of registered cost method, unit cost method, diagnostic code method, and main diagnosis method). Different levels of causality for ADEs and ADEs' contribution to health care resource use were considered. Using the five methods, the maximum estimated overall direct health care costs resulting from ADEs ranged from Sk10,000 (Sk = Swedish krona; ~€1,500 in 2016 values) using the diagnostic code method to more than Sk3,000,000 (~€414,000) using the unit cost method in our study population. The most conservative definitions for ADEs' contribution to health care resource use and the causality of ADEs resulted in average costs per patient ranging from Sk0 using the diagnostic code method to Sk4066 (~€500) using the unit cost method. The estimated costs resulting from ADEs varied considerably depending on the methodological choices. The results indicate that costs for ADEs need to be identified through medical record review and by using detailed unit cost data. Copyright © 2017 International Society for Pharmacoeconomics and Outcomes Research (ISPOR). Published by Elsevier Inc. All rights reserved.

Comparing NASA and ESA Cost Estimating Methods for Human Missions to Mars

Science.gov (United States)

Hunt, Charles D.; vanPelt, Michel O.

2004-01-01

To compare working methodologies between the cost engineering functions in NASA Marshall Space Flight Center (MSFC) and ESA European Space Research and Technology Centre (ESTEC), as well as to set-up cost engineering capabilities for future manned Mars projects and other studies which involve similar subsystem technologies in MSFC and ESTEC, a demonstration cost estimate exercise was organized. This exercise was a direct way of enhancing not only cooperation between agencies but also both agencies commitment to credible cost analyses. Cost engineers in MSFC and ESTEC independently prepared life-cycle cost estimates for a reference human Mars project and subsequently compared the results and estimate methods in detail. As a non-sensitive, public domain reference case for human Mars projects, the Mars Direct concept was chosen. In this paper the results of the exercise are shown; the differences and similarities in estimate methodologies, philosophies, and databases between MSFC and ESTEC, as well as the estimate results for the Mars Direct concept. The most significant differences are explained and possible estimate improvements identified. In addition, the Mars Direct plan and the extensive cost breakdown structure jointly set-up by MSFC and ESTEC for this concept are presented. It was found that NASA applied estimate models mainly based on historic Apollo and Space Shuttle cost data, taking into account the changes in technology since then. ESA used models mostly based on European satellite and launcher cost data, taking into account the higher equipment and testing standards for human space flight. Most of NASA's and ESA s estimates for the Mars Direct case are comparable, but there are some important, consistent differences in the estimates for: 1) Large Structures and Thermal Control subsystems; 2) System Level Management, Engineering, Product Assurance and Assembly, Integration and Test/Verification activities; 3) Mission Control; 4) Space Agency Program Level

Bulk Electric Load Cost Calculation Methods: Iraqi Network Comparative Study

Directory of Open Access Journals (Sweden)

Qais M. Alias

2016-09-01

Full Text Available It is vital in any industry to regain the spent capitals plus running costs and a margin of profits for the industry to flourish. The electricity industry is an everyday life touching industry which follows the same finance-economic strategy. Cost allocation is a major issue in all sectors of the electric industry, viz, generation, transmission and distribution. Generation and distribution service costing’s well documented in the literature, while the transmission share is still of need for research. In this work, the cost of supplying a bulk electric load connected to the EHV system is calculated. A sample basic lump-average method is used to provide a rough costing guide. Also, two transmission pricing methods are employed, namely, the postage-stamp and the load-flow based MW-distance methods to calculate transmission share in the total cost of each individual bulk load. The three costing methods results are then analyzed and compared for the 400kV Iraqi power grid considered for a case study.

Cost-effective pediatric head and body phantoms for computed tomography dosimetry and its evaluation using pencil ion chamber and CT dose profiler

Directory of Open Access Journals (Sweden)

A Saravanakumar

2015-01-01

Full Text Available In the present work, a pediatric head and body phantom was fabricated using polymethyl methacrylate (PMMA at a low cost when compared to commercially available phantoms for the purpose of computed tomography (CT dosimetry. The dimensions of head and body phantoms were 10 cm diameter, 15 cm length and 16 cm diameter, 15 cm length, respectively. The dose from a 128-slice CT machine received by the head and body phantom at the center and periphery were measured using a 100 mm pencil ion chamber and 150 mm CT dose profiler (CTDP. Using these values, the weighted computed tomography dose index (CTDIw and in turn the volumetric CTDI (CTDIv were calculated for various combinations of tube voltage and current-time product. A similar study was carried out using standard calibrated phantom and the results have been compared with the fabricated ones to ascertain that the performance of the latter is equivalent to that of the former. Finally, CTDIv measured using fabricated and standard phantoms were compared with respective values displayed on the console. The difference between the values was well within the limits specified by Atomic Energy Regulatory Board (AERB, India. These results indicate that the cost-effective pediatric phantom can be employed for CT dosimetry.

Computed tomographic colonography to screen for colorectal cancer, extracolonic cancer, and aortic aneurysm: model simulation with cost-effectiveness analysis.

Science.gov (United States)

Hassan, Cesare; Pickhardt, Perry J; Pickhardt, Perry; Laghi, Andrea; Kim, Daniel H; Kim, Daniel; Zullo, Angelo; Iafrate, Franco; Di Giulio, Lorenzo; Morini, Sergio

2008-04-14

In addition to detecting colorectal neoplasia, abdominal computed tomography (CT) with colonography technique (CTC) can also detect unsuspected extracolonic cancers and abdominal aortic aneurysms (AAA).The efficacy and cost-effectiveness of this combined abdominal CT screening strategy are unknown. A computerized Markov model was constructed to simulate the occurrence of colorectal neoplasia, extracolonic malignant neoplasm, and AAA in a hypothetical cohort of 100,000 subjects from the United States who were 50 years of age. Simulated screening with CTC, using a 6-mm polyp size threshold for reporting, was compared with a competing model of optical colonoscopy (OC), both without and with abdominal ultrasonography for AAA detection (OC-US strategy). In the simulated population, CTC was the dominant screening strategy, gaining an additional 1458 and 462 life-years compared with the OC and OC-US strategies and being less costly, with a savings of $266 and $449 per person, respectively. The additional gains for CTC were largely due to a decrease in AAA-related deaths, whereas the modeled benefit from extracolonic cancer downstaging was a relatively minor factor. At sensitivity analysis, OC-US became more cost-effective only when the CTC sensitivity for large polyps dropped to 61% or when broad variations of costs were simulated, such as an increase in CTC cost from $814 to $1300 or a decrease in OC cost from $1100 to $500. With the OC-US approach, suboptimal compliance had a strong negative influence on efficacy and cost-effectiveness. The estimated mortality from CT-induced cancer was less than estimated colonoscopy-related mortality (8 vs 22 deaths), both of which were minor compared with the positive benefit from screening. When detection of extracolonic findings such as AAA and extracolonic cancer are considered in addition to colorectal neoplasia in our model simulation, CT colonography is a dominant screening strategy (ie, more clinically effective and more cost

Costs and role of ultrasound follow-up of polytrauma patients after initial computed tomography

International Nuclear Information System (INIS)

Maurer, M.H.; Winkler, A.; Powerski, M.J.; Elgeti, F.; Huppertz, A.; Roettgen, R.; Marnitz, T.; Wichlas, F.

2012-01-01

Purpose: To assess the costs and diagnostic gain of abdominal ultrasound follow-up of polytrauma patients initially examined by whole-body computed tomography (CT). Materials and Methods: A total of 176 patients with suspected multiple trauma (126 men, 50 women; age 43.5 ± 17.4 years) were retrospectively analyzed with regard to supplementary and new findings obtained by ultrasound follow-up compared with the results of exploratory FAST (focused assessment with sonography for trauma) at admission and the findings of whole-body CT. A process model was used to document the staff, materials, and total costs of the ultrasound follow-up examinations. Results: FAST yielded 26 abdominal findings (organ injury and/or free intra-abdominal fluid) in 19 patients, while the abdominal scan of whole-body CT revealed 32 findings in 25 patients. FAST had 81 % sensitivity and 100 % specificity. Follow-up ultrasound examinations revealed new findings in 2 of the 25 patients with abdominal injuries detected with initial CT. In the 151 patients without abdominal injuries in the initial CT scan, ultrasound follow-up did not yield any supplementary or new findings. The total costs of an ultrasound follow-up examination were EUR 28.93. The total costs of all follow-up ultrasound examinations performed in the study population were EUR 5658.23. Conclusion: Follow-up abdominal ultrasound yields only a low overall diagnostic gain in polytrauma patients in whom initial CT fails to detect any abdominal injuries but incurs high personnel expenses for radiological departments. (orig.)

Cost-effectiveness of indwelling pleural catheter compared with talc in malignant pleural effusion.

Science.gov (United States)

Olfert, Jordan A P; Penz, Erika D; Manns, Braden J; Mishra, Eleanor K; Davies, Helen E; Miller, Robert F; Luengo-Fernandez, Ramon; Gao, Song; Rahman, Najib M

2017-05-01

Malignant pleural effusion is associated with morbidity and mortality. A randomized controlled trial previously compared clinical outcomes and resource use with indwelling pleural catheter (IPC) and talc pleurodesis in this population. Using unpublished quality of life data, we estimate the cost-effectiveness of IPC compared with talc pleurodesis. Healthcare utilization and costs were captured during the trial. Utility weights produced by the EuroQol Group five-dimensional three-level questionnaire and survival were used to determine quality-adjusted life-years (QALYs) gained. The incremental cost-effectiveness ratio (ICER) was calculated over the 1-year trial period. Sensitivity analysis used patient survival data and modelled additional nursing time required per week for catheter drainage. Utility scores, cost and QALYs gained did not differ significantly between groups. The ICER for IPC compared with talc was favorable at $US10 870 per QALY gained. IPC was less costly with a probability exceeding 95% of being cost-effective when survival was pleural effusion in patients without history of prior pleurodesis, with consideration for patient survival, support and preferences. © 2016 The Authors. Respirology published by John Wiley & Sons Australia, Ltd on behalf of Asian Pacific Society of Respirology.

The cost-effectiveness of single-row compared with double-row arthroscopic rotator cuff repair.

Science.gov (United States)

Genuario, James W; Donegan, Ryan P; Hamman, Daniel; Bell, John-Erik; Boublik, Martin; Schlegel, Theodore; Tosteson, Anna N A

2012-08-01

Interest in double-row techniques for arthroscopic rotator cuff repair has increased over the last several years, presumably because of a combination of literature demonstrating superior biomechanical characteristics and recent improvements in instrumentation and technique. As a result of the increasing focus on value-based health-care delivery, orthopaedic surgeons must understand the cost implications of this practice. The purpose of this study was to examine the cost-effectiveness of double-row arthroscopic rotator cuff repair compared with traditional single-row repair. A decision-analytic model was constructed to assess the cost-effectiveness of double-row arthroscopic rotator cuff repair compared with single-row repair on the basis of the cost per quality-adjusted life year gained. Two cohorts of patients (one with a tear of row compared with single-row arthroscopic rotator cuff repair was $571,500 for rotator cuff tears of row repair was less than $287 for small or moderate tears and less than $352 for large or massive tears compared with the cost of single-row repair, then double-row repair would represent a cost-effective surgical alternative. On the basis of currently available data, double-row rotator cuff repair is not cost-effective for any size rotator cuff tears. However, variability in the values for costs and probability of retear can have a profound effect on the results of the model and may create an environment in which double-row repair becomes the more cost-effective surgical option. The identification of the threshold values in this study may help surgeons to determine the most cost-effective treatment.

Comparing Results from Constant Comparative and Computer Software Methods: A Reflection about Qualitative Data Analysis

Science.gov (United States)

Putten, Jim Vander; Nolen, Amanda L.

2010-01-01

This study compared qualitative research results obtained by manual constant comparative analysis with results obtained by computer software analysis of the same data. An investigated about issues of trustworthiness and accuracy ensued. Results indicated that the inductive constant comparative data analysis generated 51 codes and two coding levels…

24 CFR Appendix to Part 972 - Methodology of Comparing Cost of Public Housing With the Cost of Tenant-Based Assistance

Science.gov (United States)

2010-04-01

... useful life. The estimated cost for the continued operation of the development as public housing shall be... 24 Housing and Urban Development 4 2010-04-01 2010-04-01 false Methodology of Comparing Cost of Public Housing With the Cost of Tenant-Based Assistance Appendix to Part 972 Housing and Urban...

The Optimal Pricing of Computer Software and Other Products with High Switching Costs

OpenAIRE

Pekka Ahtiala

2004-01-01

The paper studies the determinants of the optimum prices of computer programs and their upgrades. It is based on the notion that because of the human capital invested in the use of a computer program by its user, this product has high switching costs, and on the finding that pirates are responsible for generating over 80 per cent of new software sales. A model to maximize the present value of the program to the program house is constructed to determine the optimal prices of initial programs a...

Hepatitis C Treatment Regimens Are Cost-Effective: But Compared With What?

Science.gov (United States)

Mattingly, T Joseph; Slejko, Julia F; Mullins, C Daniel

2017-11-01

Numerous economic models have been published evaluating treatment of chronic hepatitis C virus (HCV) infection, but none provide a comprehensive comparison among new antiviral agents. Evaluate the cost-effectiveness of all recommended therapies for treatment of genotypes 1 and 4 chronic HCV. Using data from clinical trials, observational analyses, and drug pricing databases, Markov decision models were developed for HCV genotypes 1 and 4 to compare all recommended drugs from the perspective of the third-party payer over a 5-, 10-, and 50-year time horizon. A probabilistic sensitivity analysis (PSA) was conducted by assigning distributions for clinical cure, age entering the model, costs for each health state, and quality-adjusted life years (QALYs) for each health state in a Monte Carlo simulation of 10 000 repetitions of the model. In the lifetime model for genotype 1, effects ranged from 18.08 to 18.40 QALYs and total costs ranged from $88 107 to $184 636. The lifetime model of genotype 4 treatments had a range of effects from 18.23 to 18.43 QALYs and total costs ranging from $87 063 to $127 637. Grazoprevir/elbasvir was the optimal strategy followed by velpatasvir/sofosbuvir as the second-best strategy in most simulations for both genotypes 1 and 4, with drug costs and efficacy of grazoprevir/elbasvir as the primary model drivers. Grazoprevir/elbasvir was cost-effective compared with all strategies for genotypes 1 and 4. Effects for all strategies were similar with cost of drug in the initial year driving the results.

Cost-of-illness in psoriasis: comparing inpatient and outpatient therapy.

Directory of Open Access Journals (Sweden)

Sabine I B Steinke

Full Text Available Treatment modalities of chronic plaque psoriasis have dramatically changed over the past ten years with a still continuing shift from inpatient to outpatient treatment. This development is mainly caused by outpatient availability of highly efficient and relatively well-tolerated systemic treatments, in particular BioLogicals. In addition, inpatient treatment is time- and cost-intense, conflicting with the actual burst of health expenses and with patient preferences. Nevertheless, inpatient treatment with dithranol and UV light still is a major mainstay of psoriasis treatment in Germany. The current study aims at comparing the total costs of inpatient treatment and outpatient follow-up to mere outpatient therapy with different modalities (topical treatment, phototherapy, classic systemic therapy or BioLogicals over a period of 12 months. To this end, a retrospective cost-of-illness study was conducted on 120 patients treated at the University Medical Centre Mannheim between 2005 and 2006. Inpatient therapy caused significantly higher direct medical, indirect and total annual costs than outpatient treatment (13,042 € versus 2,984 €. Its strong influence on cost levels was confirmed by regression analysis, with total costs rising by 104.3% in case of inpatient treatment. Patients receiving BioLogicals produced the overall highest costs, whereas outpatient treatment with classic systemic antipsoriatic medications was less cost-intense than other alternatives.

COMPARATIVE STUDY OF CLOUD COMPUTING AND MOBILE CLOUD COMPUTING

OpenAIRE

Nidhi Rajak*, Diwakar Shukla

2018-01-01

Present era is of Information and Communication Technology (ICT) and there are number of researches are going on Cloud Computing and Mobile Cloud Computing such security issues, data management, load balancing and so on. Cloud computing provides the services to the end user over Internet and the primary objectives of this computing are resource sharing and pooling among the end users. Mobile Cloud Computing is a combination of Cloud Computing and Mobile Computing. Here, data is stored in...

[The costs of new drugs compared to current standard treatment].

Science.gov (United States)

Ujeyl, Mariam; Schlegel, Claudia; Gundert-Remy, Ursula

2013-01-01

Until AMNOG came into effect Germany had free pricing of new drugs. Our exemplary work investigates the costs of new drugs that were licensed in the two years prior to AMNOG, and compares them to the costs of standard treatment that has been used in pivotal trials. Also, the important components of pharmaceutical prices will be illustrated. We retrospectively analysed the European Public Assessment Reports of proprietary medicinal products that the European Medicinal Agency initially approved in 2009 and 2010 and that were tested against an active control in at least one pivotal trial. If the standard treatment was a generic, the average pharmacy retail price of new drugs was 7.4 times (median 7.1) higher than that of standard treatment. If the standard treatment was an originator drug the average price was 1.4 times (median 1.2) higher than that of the new drug. There was no clear correlation of an increase in costs for new drugs and their "grade of innovation" as rated according to the criteria of Fricke. Our study shows that prices of new drugs must be linked to the evidence of comparative benefit; since German drug pricing is complex, cost saving effects obtained thereby will depend on a range of other rules and decisions. Copyright © 2013. Published by Elsevier GmbH.

Comparing the relative cost-effectiveness of diagnostic studies: a new model

International Nuclear Information System (INIS)

Patton, D.D.; Woolfenden, J.M.; Wellish, K.L.

1986-01-01

We have developed a model to compare the relative cost-effectiveness of two or more diagnostic tests. The model defines a cost-effectiveness ratio (CER) for a diagnostic test as the ratio of effective cost to base cost, only dollar costs considered. Effective cost includes base cost, cost of dealing with expected side effects, and wastage due to imperfect test performance. Test performance is measured by diagnostic utility (DU), a measure of test outcomes incorporating the decision-analytic variables sensitivity, specificity, equivocal fraction, disease probability, and outcome utility. Each of these factors affecting DU, and hence CER, is a local, not universal, value; these local values strongly affect CER, which in effect becomes a property of the local medical setting. When DU = +1 and there are no adverse effects, CER = 1 and the patient benefits from the test dollar for dollar. When there are adverse effects effective cost exceeds base cost, and for an imperfect test DU 1. As DU approaches 0 (worthless test), CER approaches infinity (no effectiveness at any cost). If DU is negative, indicating that doing the test at all would be detrimental, CER also becomes negative. We conclude that the CER model is a useful preliminary method for ranking the relative cost-effectiveness of diagnostic tests, and that the comparisons would best be done using local values; different groups might well arrive at different rankings. (Author)

Event rates, hospital utilization, and costs associated with major complications of diabetes: a multicountry comparative analysis.

Directory of Open Access Journals (Sweden)

Philip M Clarke

2010-02-01

Full Text Available Diabetes imposes a substantial burden globally in terms of premature mortality, morbidity, and health care costs. Estimates of economic outcomes associated with diabetes are essential inputs to policy analyses aimed at prevention and treatment of diabetes. Our objective was to estimate and compare event rates, hospital utilization, and costs associated with major diabetes-related complications in high-, middle-, and low-income countries.Incidence and history of diabetes-related complications, hospital admissions, and length of stay were recorded in 11,140 patients with type 2 diabetes participating in the Action in Diabetes and Vascular Disease (ADVANCE study (mean age at entry 66 y. The probability of hospital utilization and number of days in hospital for major events associated with coronary disease, cerebrovascular disease, congestive heart failure, peripheral vascular disease, and nephropathy were estimated for three regions (Asia, Eastern Europe, and Established Market Economies using multiple regression analysis. The resulting estimates of days spent in hospital were multiplied by regional estimates of the costs per hospital bed-day from the World Health Organization to compute annual acute and long-term costs associated with the different types of complications. To assist, comparability, costs are reported in international dollars (Int$, which represent a hypothetical currency that allows for the same quantities of goods or services to be purchased regardless of country, standardized on purchasing power in the United States. A cost calculator accompanying this paper enables the estimation of costs for individual countries and translation of these costs into local currency units. The probability of attending a hospital following an event was highest for heart failure (93%-96% across regions and lowest for nephropathy (15%-26%. The average numbers of days in hospital given at least one admission were greatest for stroke (17-32 d across

Comparing costs of power and heat production by prospective and present sources

International Nuclear Information System (INIS)

Novak, S.

1979-01-01

Capital and running costs are compared of power and heat production from different sources. The lowest capital costs were found for coal-fired power plants followed by light water reactor power plants. The capital costs of other types of power plants, such as wind, geothermal, solar, thermonuclear power plants are significantly higher. The estimated specific cost for electric power production in 1985 for a nuclear power plant is lower than for a fossil-fuel power plant. It is estimated that in 1985 coal will be the cheapest heat source. (Ha)

Comparing methodologies for the allocation of overhead and capital costs to hospital services.

Science.gov (United States)

Tan, Siok Swan; van Ineveld, Bastianus Martinus; Redekop, William Ken; Hakkaart-van Roijen, Leona

2009-06-01

Typically, little consideration is given to the allocation of indirect costs (overheads and capital) to hospital services, compared to the allocation of direct costs. Weighted service allocation is believed to provide the most accurate indirect cost estimation, but the method is time consuming. To determine whether hourly rate, inpatient day, and marginal mark-up allocation are reliable alternatives for weighted service allocation. The cost approaches were compared independently for appendectomy, hip replacement, cataract, and stroke in representative general hospitals in The Netherlands for 2005. Hourly rate allocation and inpatient day allocation produce estimates that are not significantly different from weighted service allocation. Hourly rate allocation may be a strong alternative to weighted service allocation for hospital services with a relatively short inpatient stay. The use of inpatient day allocation would likely most closely reflect the indirect cost estimates obtained by the weighted service method.

What Does It Cost a University to Educate One Student

Directory of Open Access Journals (Sweden)

Maria Andrea Lotho Santiago

2007-02-01

Full Text Available A dilemma administrators continually face is whether to continue offering degree programs despite low student uptake, especially because producing reliable cost data to aid decision making can prove difficult. Often, a university determines a standard cost per credit or unit and uses this figure as a basis for computing the total cost of running a degree program. This is then compared to a revenue stream and the difference, whether positive or negative, is used in decision making. However, this method of computing costs, although appealing for its simplicity, may fail to capture the effects of economies that may arise as one school or college services another. In this paper, we use a basic cost accounting methodology applied to the higher education system of the Philippines to compute for a cost per degree per student for a sample of public and private universities. Although the methodology is more time consuming, the computed figures are deemed closer to actual costs and, thus, we argue, are more reliable as inputs to financial decision making.

[Cost analysis for navigation in knee endoprosthetics].

Science.gov (United States)

Cerha, O; Kirschner, S; Günther, K-P; Lützner, J

2009-12-01

Total knee arthroplasty (TKA) is one of the most frequent procedures in orthopaedic surgery. The outcome depends on a range of factors including alignment of the leg and the positioning of the implant in addition to patient-associated factors. Computer-assisted navigation systems can improve the restoration of a neutral leg alignment. This procedure has been established especially in Europe and North America. The additional expenses are not reimbursed in the German DRG system (Diagnosis Related Groups). In the present study a cost analysis of computer-assisted TKA compared to the conventional technique was performed. The acquisition expenses of various navigation systems (5 and 10 year depreciation), annual costs for maintenance and software updates as well as the accompanying costs per operation (consumables, additional operating time) were considered. The additional operating time was determined on the basis of a meta-analysis according to the current literature. Situations with 25, 50, 100, 200 and 500 computer-assisted TKAs per year were simulated. The amount of the incremental costs of the computer-assisted TKA depends mainly on the annual volume and the additional operating time. A relevant decrease of the incremental costs was detected between 50 and 100 procedures per year. In a model with 100 computer-assisted TKAs per year an additional operating time of 14 mins and a 10 year depreciation of the investment costs, the incremental expenses amount to 300-395 depending on the navigation system. Computer-assisted TKA is associated with additional costs. From an economical point of view an amount of more than 50 procedures per year appears to be favourable. The cost-effectiveness could be estimated if long-term results will show a reduction of revisions or a better clinical outcome.

VISTA - computational tools for comparative genomics

Energy Technology Data Exchange (ETDEWEB)

Frazer, Kelly A.; Pachter, Lior; Poliakov, Alexander; Rubin,Edward M.; Dubchak, Inna

2004-01-01

Comparison of DNA sequences from different species is a fundamental method for identifying functional elements in genomes. Here we describe the VISTA family of tools created to assist biologists in carrying out this task. Our first VISTA server at http://www-gsd.lbl.gov/VISTA/ was launched in the summer of 2000 and was designed to align long genomic sequences and visualize these alignments with associated functional annotations. Currently the VISTA site includes multiple comparative genomics tools and provides users with rich capabilities to browse pre-computed whole-genome alignments of large vertebrate genomes and other groups of organisms with VISTA Browser, submit their own sequences of interest to several VISTA servers for various types of comparative analysis, and obtain detailed comparative analysis results for a set of cardiovascular genes. We illustrate capabilities of the VISTA site by the analysis of a 180 kilobase (kb) interval on human chromosome 5 that encodes for the kinesin family member3A (KIF3A) protein.

Gradient matching methods for computational inference in mechanistic models for systems biology: a review and comparative analysis

Directory of Open Access Journals (Sweden)

Benn eMacdonald

2015-11-01

Full Text Available Parameter inference in mathematical models of biological pathways, expressed as coupled ordinary differential equations (ODEs, is a challenging problem in contemporary systems biology. Conventional methods involve repeatedly solving the ODEs by numerical integration, which is computationally onerous and does not scale up to complex systems. Aimed at reducing the computational costs, new concepts based on gradient matching have recently been proposed in the computational statistics and machine learning literature. In a preliminary smoothing step, the time series data are interpolated; then, in a second step, the parameters of the ODEs are optimised so as to minimise some metric measuring the difference between the slopes of the tangents to the interpolants, and the time derivatives from the ODEs. In this way, the ODEs never have to be solved explicitly. This review provides a concise methodological overview of the current state-of-the-art methods for gradient matching in ODEs, followed by an empirical comparative evaluation based on a set of widely used and representative benchmark data.

Cost-effectiveness modeling of colorectal cancer: Computed tomography colonography vs colonoscopy or fecal occult blood tests

International Nuclear Information System (INIS)

Lucidarme, Olivier; Cadi, Mehdi; Berger, Genevieve; Taieb, Julien; Poynard, Thierry; Grenier, Philippe; Beresniak, Ariel

2012-01-01

Objectives: To assess the cost-effectiveness of three colorectal-cancer (CRC) screening strategies in France: fecal-occult-blood tests (FOBT), computed-tomography-colonography (CTC) and optical-colonoscopy (OC). Methods: Ten-year simulation modeling was used to assess a virtual asymptomatic, average-risk population 50–74 years old. Negative OC was repeated 10 years later, and OC positive for advanced or non-advanced adenoma 3 or 5 years later, respectively. FOBT was repeated biennially. Negative CTC was repeated 5 years later. Positive CTC and FOBT led to triennial OC. Total cost and CRC rate after 10 years for each screening strategy and 0–100% adherence rates with 10% increments were computed. Transition probabilities were programmed using distribution ranges to account for uncertainty parameters. Direct medical costs were estimated using the French national health insurance prices. Probabilistic sensitivity analyses used 5000 Monte Carlo simulations generating model outcomes and standard deviations. Results: For a given adherence rate, CTC screening was always the most effective but not the most cost-effective. FOBT was the least effective but most cost-effective strategy. OC was of intermediate efficacy and the least cost-effective strategy. Without screening, treatment of 123 CRC per 10,000 individuals would cost €3,444,000. For 60% adherence, the respective costs of preventing and treating, respectively 49 and 74 FOBT-detected, 73 and 50 CTC-detected and 63 and 60 OC-detected CRC would be €2,810,000, €6,450,000 and €9,340,000. Conclusion: Simulation modeling helped to identify what would be the most effective (CTC) and cost-effective screening (FOBT) strategy in the setting of mass CRC screening in France.

Social welfare and the Affordable Care Act: is it ever optimal to set aside comparative cost?

Science.gov (United States)

Mortimer, Duncan; Peacock, Stuart

2012-10-01

The creation of the Patient-Centered Outcomes Research Institute (PCORI) under the Affordable Care Act has set comparative effectiveness research (CER) at centre stage of US health care reform. Comparative cost analysis has remained marginalised and it now appears unlikely that the PCORI will require comparative cost data to be collected as an essential component of CER. In this paper, we review the literature to identify ethical and distributional objectives that might motivate calls to set priorities without regard to comparative cost. We then present argument and evidence to consider whether there is any plausible set of objectives and constraints against which priorities can be set without reference to comparative cost. We conclude that - to set aside comparative cost even after accounting for ethical and distributional constraints - would be truly to act as if money is no object. Copyright © 2012 Elsevier Ltd. All rights reserved.

[Operating cost analysis of anaesthesia: activity based costing (ABC analysis)].

Science.gov (United States)

Majstorović, Branislava M; Kastratović, Dragana A; Vučović, Dragan S; Milaković, Branko D; Miličić, Biljana R

2011-01-01

Cost of anaesthesiology represent defined measures to determine a precise profile of expenditure estimation of surgical treatment, which is important regarding planning of healthcare activities, prices and budget. In order to determine the actual value of anaestesiological services, we started with the analysis of activity based costing (ABC) analysis. Retrospectively, in 2005 and 2006, we estimated the direct costs of anestesiological services (salaries, drugs, supplying materials and other: analyses and equipment.) of the Institute of Anaesthesia and Resuscitation of the Clinical Centre of Serbia. The group included all anesthetized patients of both sexes and all ages. We compared direct costs with direct expenditure, "each cost object (service or unit)" of the Republican Healthcare Insurance. The Summary data of the Departments of Anaesthesia documented in the database of the Clinical Centre of Serbia. Numerical data were utilized and the numerical data were estimated and analyzed by computer programs Microsoft Office Excel 2003 and SPSS for Windows. We compared using the linear model of direct costs and unit costs of anaesthesiological services from the Costs List of the Republican Healthcare Insurance. Direct costs showed 40% of costs were spent on salaries, (32% on drugs and supplies, and 28% on other costs, such as analyses and equipment. The correlation of the direct costs of anaestesiological services showed a linear correlation with the unit costs of the Republican Healthcare Insurance. During surgery, costs of anaesthesia would increase by 10% the surgical treatment cost of patients. Regarding the actual costs of drugs and supplies, we do not see any possibility of costs reduction. Fixed elements of direct costs provide the possibility of rationalization of resources in anaesthesia.

Comparing computing formulas for estimating concentration ratios

International Nuclear Information System (INIS)

Gilbert, R.O.; Simpson, J.C.

1984-03-01

This paper provides guidance on the choice of computing formulas (estimators) for estimating concentration ratios and other ratio-type measures of radionuclides and other environmental contaminant transfers between ecosystem components. Mathematical expressions for the expected value of three commonly used estimators (arithmetic mean of ratios, geometric mean of ratios, and the ratio of means) are obtained when the multivariate lognormal distribution is assumed. These expressions are used to explain why these estimators will not in general give the same estimate of the average concentration ratio. They illustrate that the magnitude of the discrepancies depends on the magnitude of measurement biases, and on the variances and correlations associated with spatial heterogeneity and measurement errors. This paper also reports on a computer simulation study that compares the accuracy of eight computing formulas for estimating a ratio relationship that is constant over time and/or space. Statistical models appropriate for both controlled spiking experiments and observational field studies for either normal or lognormal distributions are considered. 24 references, 15 figures, 7 tables

Computer Aided Design of a Low-Cost Painting Robot

Directory of Open Access Journals (Sweden)

SYEDA MARIA KHATOON ZAIDI

2017-10-01

Full Text Available The application of robots or robotic systems for painting parts is becoming increasingly conventional; to improve reliability, productivity, consistency and to decrease waste. However, in Pakistan only highend Industries are able to afford the luxury of a robotic system for various purposes. In this study we propose an economical Painting Robot that a small-scale industry can install in their plant with ease. The importance of this robot is that being cost effective, it can easily be replaced in small manufacturing industries and therefore, eliminate health problems occurring to the individual in charge of painting parts on an everyday basis. To achieve this aim, the robot is made with local parts with only few exceptions, to cut costs; and the programming language is kept at a mediocre level. Image processing is used to establish object recognition and it can be programmed to paint various simple geometries. The robot is placed on a conveyer belt to maximize productivity. A four DoF (Degree of Freedom arm increases the working envelope and accessibility of painting different shaped parts with ease. This robot is capable of painting up, front, back, left and right sides of the part with a single colour. Initially CAD (Computer Aided Design models of the robot were developed which were analyzed, modified and improved to withstand loading condition and perform its task efficiently. After design selection, appropriate motors and materials were selected and the robot was developed. Throughout the development phase, minor problems and errors were fixed accordingly as they arose. Lastly the robot was integrated with the computer and image processing for autonomous control. The final results demonstrated that the robot is economical and reduces paint wastage.

Computer aided design of a low-cost painting robot

International Nuclear Information System (INIS)

Zaidi, S.M.; Janejo, F.; Mujtaba, S.B.

2017-01-01

The application of robots or robotic systems for painting parts is becoming increasingly conventional; to improve reliability, productivity, consistency and to decrease waste. However, in Pakistan only highend Industries are able to afford the luxury of a robotic system for various purposes. In this study we propose an economical Painting Robot that a small-scale industry can install in their plant with ease. The importance of this robot is that being cost effective, it can easily be replaced in small manufacturing industries and therefore, eliminate health problems occurring to the individual in charge of painting parts on an everyday basis. To achieve this aim, the robot is made with local parts with only few exceptions, to cut costs; and the programming language is kept at a mediocre level. Image processing is used to establish object recognition and it can be programmed to paint various simple geometries. The robot is placed on a conveyer belt to maximize productivity. A four DoF (Degree of Freedom) arm increases the working envelope and accessibility of painting different shaped parts with ease. This robot is capable of painting up, front, back, left and right sides of the part with a single colour. Initially CAD (Computer Aided Design) models of the robot were developed which were analyzed, modified and improved to withstand loading condition and perform its task efficiently. After design selection, appropriate motors and materials were selected and the robot was developed. Throughout the development phase, minor problems and errors were fixed accordingly as they arose. Lastly the robot was integrated with the computer and image processing for autonomous control. The final results demonstrated that the robot is economical and reduces paint wastage. (author)

Product Costing in FMT: Comparing Deterministic and Stochastic Models Using Computer-Based Simulation for an Actual Case Study

DEFF Research Database (Denmark)

Nielsen, Steen

2000-01-01

This paper expands the traditional product costing technique be including a stochastic form in a complex production process for product costing. The stochastic phenomenon in flesbile manufacturing technologies is seen as an important phenomenon that companies try to decreas og eliminate. DFM has...... been used for evaluating the appropriateness of the firm's production capability. In this paper a simulation model is developed to analyze the relevant cost behaviour with respect to DFM and to develop a more streamlined process in the layout of the manufacturing process....

Comparative study between computed radiography and conventional radiography

International Nuclear Information System (INIS)

Noorhazleena Azaman; Khairul Anuar Mohd Salleh; Sapizah Rahim; Shaharudin Sayuti; Arshad Yassin; Abdul Razak Hamzah

2010-01-01

In Industrial Radiography, there are many criteria that need to be considered based on established standards to accept or reject the radiographic film. For conventional radiography, we need to consider the optical density by using the densitometer when viewing the film on the viewer. But in the computed radiography (CR) we need to evaluate and performed the analysis from the quality of the digital image through grey value. There are many factors that affected the digital image quality. One of the factors which are affected to the digital image quality in the image processing is grey value that related to the contrast resolution. In this work, we performed grey value study measurement on digital radiography systems and compared it with exposed films in conventional radiography. The test sample is a steel step wedge. We found out the contrast resolution is higher in Computed Radiography compared with Conventional Radiography. (author)

The cost of nuclear electricity: France after Fukushima

International Nuclear Information System (INIS)

Boccard, Nicolas

2014-01-01

The Fukushima disaster has lead the French government to release novel cost information relative to its nuclear electricity program allowing us to compute a levelized cost. We identify a modest escalation of capital cost and a larger than expected operational cost. Under the best scenario, the cost of French nuclear power over the last four decades is 59€/MWh (at 2010 prices) while in the worst case it is 83€/MWh. On the basis of these findings, we estimate the future cost of nuclear power in France to be at least 76€/MWh and possibly 117€/MWh. A comparison with the US confirms that French nuclear electricity nevertheless remains cheaper. Comparisons with coal, natural gas and wind power are carried out to find the advantage of these. - Highlights: • We compute the levelized cost of French nuclear power over 40 years using a novel court of audit report. • We include R and D, technology development, fissile fuel, financing cost, decommissioning and the back-end cycle. • We find a mild capital cost escalation and a high operation cost driven by a low fleet availability. • The levelized cost ranges between 59 and 83€/MWh (at 2010 prices) and compares favorably to the US. • A tentative cost for future nuclear power ranges between 76 and 117€/MWh and compares unfavorably against alternative fuels

Chest Computed Tomographic Image Screening for Cystic Lung Diseases in Patients with Spontaneous Pneumothorax Is Cost Effective.

Science.gov (United States)

Gupta, Nishant; Langenderfer, Dale; McCormack, Francis X; Schauer, Daniel P; Eckman, Mark H

2017-01-01

Patients without a known history of lung disease presenting with a spontaneous pneumothorax are generally diagnosed as having primary spontaneous pneumothorax. However, occult diffuse cystic lung diseases such as Birt-Hogg-Dubé syndrome (BHD), lymphangioleiomyomatosis (LAM), and pulmonary Langerhans cell histiocytosis (PLCH) can also first present with a spontaneous pneumothorax, and their early identification by high-resolution computed tomographic (HRCT) chest imaging has implications for subsequent management. The objective of our study was to evaluate the cost-effectiveness of HRCT chest imaging to facilitate early diagnosis of LAM, BHD, and PLCH. We constructed a Markov state-transition model to assess the cost-effectiveness of screening HRCT to facilitate early diagnosis of diffuse cystic lung diseases in patients presenting with an apparent primary spontaneous pneumothorax. Baseline data for prevalence of BHD, LAM, and PLCH and rates of recurrent pneumothoraces in each of these diseases were derived from the literature. Costs were extracted from 2014 Medicare data. We compared a strategy of HRCT screening followed by pleurodesis in patients with LAM, BHD, or PLCH versus conventional management with no HRCT screening. In our base case analysis, screening for the presence of BHD, LAM, or PLCH in patients presenting with a spontaneous pneumothorax was cost effective, with a marginal cost-effectiveness ratio of $1,427 per quality-adjusted life-year gained. Sensitivity analysis showed that screening HRCT remained cost effective for diffuse cystic lung diseases prevalence as low as 0.01%. HRCT image screening for BHD, LAM, and PLCH in patients with apparent primary spontaneous pneumothorax is cost effective. Clinicians should consider performing a screening HRCT in patients presenting with apparent primary spontaneous pneumothorax.

18F-Fluorodeoxyglucose Positron Emission Tomography/Computed Tomography Accuracy in the Staging of Non-Small Cell Lung Cancer: Review and Cost-Effectiveness

International Nuclear Information System (INIS)

Gómez León, Nieves; Escalona, Sofía; Bandrés, Beatriz; Belda, Cristobal; Callejo, Daniel; Blasco, Juan Antonio

2014-01-01

Aim of the performed clinical study was to compare the accuracy and cost-effectiveness of PET/CT in the staging of non-small cell lung cancer (NSCLC). Material and Methods. Cross-sectional and prospective study including 103 patients with histologically confirmed NSCLC. All patients were examined using PET/CT with intravenous contrast medium. Those with disease stage ≤IIB underwent surgery (n = 40). Disease stage was confirmed based on histology results, which were compared with those of PET/CT and positron emission tomography (PET) and computed tomography (CT) separately. 63 patients classified with ≥IIIA disease stage by PET/CT did not undergo surgery. The cost-effectiveness of PET/CT for disease classification was examined using a decision tree analysis. Results. Compared with histology, the accuracy of PET/CT for disease staging has a positive predictive value of 80%, a negative predictive value of 95%, a sensitivity of 94%, and a specificity of 82%. For PET alone, these values are 53%, 66%, 60%, and 50%, whereas for CT alone they are 68%, 86%, 76%, and 72%, respectively. Incremental cost-effectiveness of PET/CT over CT alone was €17,412 quality-adjusted life-year (QALY). Conclusion. In our clinical study, PET/CT using intravenous contrast medium was an accurate and cost-effective method for staging of patients with NSCLC

18F-Fluorodeoxyglucose Positron Emission Tomography/Computed Tomography Accuracy in the Staging of Non-Small Cell Lung Cancer: Review and Cost-Effectiveness

International Nuclear Information System (INIS)

Leon, N.G.; Bandrs, B.; Escalona, S.; Callejo, D.; Blasco, J.A.; Belda, C.; Blasco, J.A.

2014-01-01

Aim of the performed clinical study was to compare the accuracy and cost-effectiveness of PET/CT in the staging of non-small cell lung cancer (NSCLC). Material and Methods. Cross-sectional and prospective study including 103 patients with histologically confirmed NSCLC. All patients were examined using PET/CT with intravenous contrast medium. Those with disease stage ≤IIB underwent surgery (η=40). Disease stage was confirmed based on histology results, which were compared with those of PET/CT and positron emission tomography (PET) and computed tomography (CT) separately. 63 patients classified with ≥IIIA disease stage by PET/CT did not undergo surgery. The cost-effectiveness of PET/CT for disease classification was examined using a decision tree analysis. Results. Compared with histology, the accuracy of PET/CT for disease staging has a positive predictive value of 80%, a negative predictive value of 95%, a sensitivity of 94%, and a specificity of 82%. For PET alone, these values are 53%, 66%, 60%, and 50%, whereas for CT alone they are 68%, 86%, 76%, and 72%, respectively. Incremental cost-effectiveness of PET/CT over CT alone was €17,412 quality-adjusted life-year (QALY). Conclusion. In our clinical study, PET/CT using intravenous contrast medium was an accurate and cost-effective method for staging of patients with NSCLC

Cost-effectiveness of home telemedical cardiotocography compared with traditional outpatient monitoring.

Science.gov (United States)

Tõrõk, M; Kovács, F; Doszpod, J

2000-01-01

We compared the cost of passive sensor telemedical non-stress cardiotocography performed at home and the same test performed by traditional equipment in an outpatient clinic in the Budapest area. The costs were calculated using two years' registered budget data from the home monitoring service in Budapest and the outpatient clinic of the department of obstetrics and gynaecology at the Haynal Imre University of Health Sciences. The traditional test at the university outpatient clinic cost 3652 forint for the health-care and 1000 forint in additional expenses for the patient (travel and time off work). This means that the total cost for each test in the clinic was 4652 forint. The cost of home telemedical cardiotocography was 1500 forint per test, but each test took 2.1 times as long. For a more realistic comparison between the two methods, we adjusted the cost to take account of the extra length of time that home monitoring required. The adjusted cost for home care was 3150 forint, some 32% lower than in the clinic. Passive sensor telemedical non-stress cardiotocography at home was therefore less expensive than the same test performed in the traditional way in an outpatient clinic.

The Cost-Effectiveness of Dual Mobility Implants for Primary Total Hip Arthroplasty: A Computer-Based Cost-Utility Model.

Science.gov (United States)

Barlow, Brian T; McLawhorn, Alexander S; Westrich, Geoffrey H

2017-05-03

Dislocation remains a clinically important problem following primary total hip arthroplasty, and it is a common reason for revision total hip arthroplasty. Dual mobility (DM) implants decrease the risk of dislocation but can be more expensive than conventional implants and have idiosyncratic failure mechanisms. The purpose of this study was to investigate the cost-effectiveness of DM implants compared with conventional bearings for primary total hip arthroplasty. Markov model analysis was conducted from the societal perspective with use of direct and indirect costs. Costs, expressed in 2013 U.S. dollars, were derived from the literature, the National Inpatient Sample, and the Centers for Medicare & Medicaid Services. Effectiveness was expressed in quality-adjusted life years (QALYs). The model was populated with health state utilities and state transition probabilities derived from previously published literature. The analysis was performed for a patient's lifetime, and costs and effectiveness were discounted at 3% annually. The principal outcome was the incremental cost-effectiveness ratio (ICER), with a willingness-to-pay threshold of $100,000/QALY. Sensitivity analyses were performed to explore relevant uncertainty. In the base case, DM total hip arthroplasty showed absolute dominance over conventional total hip arthroplasty, with lower accrued costs ($39,008 versus $40,031 U.S. dollars) and higher accrued utility (13.18 versus 13.13 QALYs) indicating cost-savings. DM total hip arthroplasty ceased being cost-saving when its implant costs exceeded those of conventional total hip arthroplasty by $1,023, and the cost-effectiveness threshold for DM implants was $5,287 greater than that for conventional implants. DM was not cost-effective when the annualized incremental probability of revision from any unforeseen failure mechanism or mechanisms exceeded 0.29%. The probability of intraprosthetic dislocation exerted the most influence on model results. This model

The concept of computer software designed to identify and analyse logistics costs in agricultural enterprises

Directory of Open Access Journals (Sweden)

Karol Wajszczyk

2009-01-01

Full Text Available The study comprised research, development and computer programming works concerning the development of a concept for the IT tool to be used in the identification and analysis of logistics costs in agricultural enterprises in terms of the process-based approach. As a result of research and programming work an overall functional and IT concept of software was developed for the identification and analysis of logistics costs for agricultural enterprises.

Comparing the Costs and Acceptability of Three Fidelity Assessment Methods for Assertive Community Treatment.

Science.gov (United States)

Rollins, Angela L; Kukla, Marina; Salyers, Michelle P; McGrew, John H; Flanagan, Mindy E; Leslie, Doug L; Hunt, Marcia G; McGuire, Alan B

2017-09-01

Successful implementation of evidence-based practices requires valid, yet practical fidelity monitoring. This study compared the costs and acceptability of three fidelity assessment methods: on-site, phone, and expert-scored self-report. Thirty-two randomly selected VA mental health intensive case management teams completed all fidelity assessments using a standardized scale and provided feedback on each. Personnel and travel costs across the three methods were compared for statistical differences. Both phone and expert-scored self-report methods demonstrated significantly lower costs than on-site assessments, even when excluding travel costs. However, participants preferred on-site assessments. Remote fidelity assessments hold promise in monitoring large scale program fidelity with limited resources.

Comparing the social costs of biofuels and fossil fuels: A case study of Vietnam

International Nuclear Information System (INIS)

Le, Loan T.; Ierland, Ekko C. van; Zhu, Xueqin; Wesseler, Justus; Ngo, Giang

2013-01-01

Biofuel substitution for fossil fuels has been recommended in the literature and promoted in many countries; however, there are concerns about its economic viability. In this paper we focus on the cost-effectiveness of fuels, i.e., we compare the social costs of biofuels and fossil fuels for a functional unit defined as 1 km of vehicle transportation. We base our empirical results on a case study in Vietnam and compare two biofuels and their alternative fossil fuels: ethanol and gasoline, and biodiesel and diesel with a focus on the blends of E5 and E10 for ethanol, and B5 and B10 for biodiesel. At the discount rate of 4%, ethanol substitution for gasoline in form of E5 or E10 saves 33% of the social cost of gasoline if the fuel consumption of E5 and E10 is the same as gasoline. The ethanol substitution will be cost-effective if the fuel consumption of E5 and E10, in terms of L km −1 , is not exceeding the consumption of gasoline by more than 1.7% and 3.5% for E5 and E10 respectively. The biodiesel substitution would be cost-effective if the fuel consumption of B5 and B10, in terms of L km −1 compared to diesel, would decrease by more than 1.4% and 2.8% for B5 and B10 respectively at the discount rate of 4%. -- Highlights: •We examine cost-effectiveness of biofuels under efficiency levels of blends. •Cassava-based ethanol used as E5 saves 33% of social cost compared to gasoline. •Ethanol is cost-effective if E5 consumption per km is less than 1.017 times gasoline consumption. •Jatropha-based biodiesel used as B5 or B10 is currently not cost-effective in comparison to diesel. •Biodiesel would be cost-effective if B5 consumption per km would be less than 0.986 times diesel consumption

Comparing the cost-per-QALYs gained and cost-per-DALYs averted literatures.

Science.gov (United States)

Neumann, Peter J; Anderson, Jordan E; Panzer, Ari D; Pope, Elle F; D'Cruz, Brittany N; Kim, David D; Cohen, Joshua T

2018-01-18

Background : We examined the similarities and differences between studies using two common metrics used in cost-effectiveness analyses (CEAs): cost per quality-adjusted life years (QALYs) gained and cost per disability-adjusted life year (DALY) averted. Methods : We used the Tufts Medical Center CEA Registry, which contains English-language cost-per-QALY gained studies, and  Global Cost-Effectiveness Analysis (GHCEA) Registry, which contains cost-per-DALY averted studies. We examined study characteristics including intervention type, sponsor, country, and primary disease, and also analysed the number of CEAs versus disease burden estimates for major diseases and conditions across three geographic regions. Results : We identified 6,438 cost-per-QALY and 543 cost-per-DALY studies published through 2016 and observed rapid growth in publication rates for both literatures. Cost-per-QALY studies were most likely to examine pharmaceuticals and interventions in high-income countries. Cost-per-DALY studies predominantly focused on infectious disease interventions and interventions in low and lower-middle income countries. We found discrepancies in the number of published CEAs for certain diseases and conditions in certain regions, suggesting "under-studied" areas (e.g., cardiovascular disease in Southeast Asia, East Asia, and Oceania and "overstudied" areas (e.g., HIV in Sub Saharan Africa) relative to disease burden in those regions. Conclusions : The number of cost-per QALY and cost-per-DALY analyses has grown rapidly with applications to diverse interventions and diseases.  Discrepancies between the number of published studies and disease burden suggest funding opportunities for future cost-effectiveness research.

Effects of computer-assisted oral anticoagulant therapy

DEFF Research Database (Denmark)

Rasmussen, Rune Skovgaard; Corell, Pernille; Madsen, Poul

2012-01-01

: Patients randomized to computer-assisted anticoagulation and the CoaguChek® system reached the therapeutic target range after 8 days compared to 14 days by prescriptions from physicians (p = 0.04). Time spent in the therapeutic target range did not differ between groups. The median INR value measured...... prescribed by physicians, and the total time spent within the therapeutic target range was similar. Thus computer-assisted oral anticoagulant therapy may reduce the cost of anticoagulation therapy without lowering the quality. INR values measured by CoaguChek® were reliable compared to measurements......UNLABELLED: BACKGROUND: Computer-assistance and self-monitoring lower the cost and may improve the quality of anticoagulation therapy. The main purpose of this clinical investigation was to use computer-assisted oral anticoagulant therapy to improve the time to reach and the time spent within...

Comparative costs of coal and nuclear-generated electricity in the united states

International Nuclear Information System (INIS)

Brandfon, W.W.

1987-01-01

This paper compares the future first-year operating costs and lifetime levelized costs of producing baseload coal- and nuclear-generated electricity under schedules shorter than those recently experienced at U.S. plants. Nuclear appears to have a clear economic advantage. Coal is favorable only when it is assumed that the units will operate at very low capacity factors and/or when the capital cost differential between nuclear and coal is increased far above the recent historical level. Nuclear is therefore a cost-competitive electric energy option for utilities and should be considered as an alternative to coal when large baseload capacity is required. (author)

Evolutionary computation techniques a comparative perspective

CERN Document Server

Cuevas, Erik; Oliva, Diego

2017-01-01

This book compares the performance of various evolutionary computation (EC) techniques when they are faced with complex optimization problems extracted from different engineering domains. Particularly focusing on recently developed algorithms, it is designed so that each chapter can be read independently. Several comparisons among EC techniques have been reported in the literature, however, they all suffer from one limitation: their conclusions are based on the performance of popular evolutionary approaches over a set of synthetic functions with exact solutions and well-known behaviors, without considering the application context or including recent developments. In each chapter, a complex engineering optimization problem is posed, and then a particular EC technique is presented as the best choice, according to its search characteristics. Lastly, a set of experiments is conducted in order to compare its performance to other popular EC methods.

A Refined Basket of Goods Approach for Comparing Construction Costs between Countries

Directory of Open Access Journals (Sweden)

Rick Best

2012-11-01

Full Text Available Most comparisons of construction industry performance requirethat construction costs be converted to a common base. Existingmechanisms for such conversions produce unreliable results.A proposed method for producing industry-specifi c conversionfactors was tested using a single building type. A basket ofmaterials and labour was identifi ed and weighted to refl ect the costshare of each item in a completed project. Prices for the basketwere gathered in three cities and simple construction specifi cconversion indices were calculated based on the constructionpurchasing power of each currency. The construction purchasingpower parities (CPPPs showed marked differences from otheravailable conversion mechanisms such as exchange rates andgeneral purchasing power parities (PPPs that have been used inprevious international comparison studies. While the study waslimited in scope, and is only the fi rst stage of a longer process, thesubstantial differences in comparative costs based on purchasingpower illustrate the problems inherent in international costcomparisons. For example, comparing Singapore and Sydney,Singapore costs appear to be only 40% of those in Sydney (basedon exchange rates about two-thirds the cost of Sydney (usinggeneral PPPs or almost the same (using the preliminary CPPPs.These results illustrate the problems of converting costs fromlocal currencies to a single base currency and suggest that furtherdevelopment is needed to improve the reliability of outcomes.

Comparing VA and private sector healthcare costs for end-stage renal disease.

Science.gov (United States)

Hynes, Denise M; Stroupe, Kevin T; Fischer, Michael J; Reda, Domenic J; Manning, Willard; Browning, Margaret M; Huo, Zhiping; Saban, Karen; Kaufman, James S

2012-02-01

Healthcare for end-stage renal disease (ESRD) is intensive, expensive, and provided in both the public and private sector. Using a societal perspective, we examined healthcare costs and health outcomes for Department of Veterans Affairs (VA) ESRD patients comparing those who received hemodialysis care at VA versus private sector facilities. Dialysis patients were recruited from 8 VA medical centers from 2001 through 2003 and followed for 12 months in a prospective cohort study. Patient demographics, clinical characteristics, quality of life, healthcare use, and cost data were collected. Healthcare data included utilization (VA), claims (Medicare), and patient self-report. Costs included VA calculated costs, Medicare dialysis facility reports and reimbursement rates, and patient self-report. Multivariable regression was used to compare costs between patients receiving dialysis at VA versus private sector facilities. The cohort comprised 334 patients: 170 patients in the VA dialysis group and 164 patients in the private sector group. The VA dialysis group had more comorbidities at baseline, outpatient and emergency visits, prescriptions, and longer hospital stays; they also had more conservative anemia management and lower baseline urea reduction ratio (67% vs. 72%; Pprivate sector dialysis group (Pprivate sector settings is critical in informing health policy options for patients with complex chronic illnesses such as ESRD.

A novel cost based model for energy consumption in cloud computing.

Science.gov (United States)

Horri, A; Dastghaibyfard, Gh

2015-01-01

Cloud data centers consume enormous amounts of electrical energy. To support green cloud computing, providers also need to minimize cloud infrastructure energy consumption while conducting the QoS. In this study, for cloud environments an energy consumption model is proposed for time-shared policy in virtualization layer. The cost and energy usage of time-shared policy were modeled in the CloudSim simulator based upon the results obtained from the real system and then proposed model was evaluated by different scenarios. In the proposed model, the cache interference costs were considered. These costs were based upon the size of data. The proposed model was implemented in the CloudSim simulator and the related simulation results indicate that the energy consumption may be considerable and that it can vary with different parameters such as the quantum parameter, data size, and the number of VMs on a host. Measured results validate the model and demonstrate that there is a tradeoff between energy consumption and QoS in the cloud environment. Also, measured results validate the model and demonstrate that there is a tradeoff between energy consumption and QoS in the cloud environment.

Omniscopes: Large area telescope arrays with only NlogN computational cost

International Nuclear Information System (INIS)

Tegmark, Max; Zaldarriaga, Matias

2010-01-01

We show that the class of antenna layouts for telescope arrays allowing cheap analysis hardware (with correlator cost scaling as NlogN rather than N 2 with the number of antennas N) is encouragingly large, including not only previously discussed rectangular grids but also arbitrary hierarchies of such grids, with arbitrary rotations and shears at each level. We show that all correlations for such a 2D array with an n-level hierarchy can be efficiently computed via a fast Fourier transform in not two but 2n dimensions. This can allow major correlator cost reductions for science applications requiring exquisite sensitivity at widely separated angular scales, for example, 21 cm tomography (where short baselines are needed to probe the cosmological signal and long baselines are needed for point source removal), helping enable future 21 cm experiments with thousands or millions of cheap dipolelike antennas. Such hierarchical grids combine the angular resolution advantage of traditional array layouts with the cost advantage of a rectangular fast Fourier transform telescope. We also describe an algorithm for how a subclass of hierarchical arrays can efficiently use rotation synthesis to produce global sky maps with minimal noise and a well-characterized synthesized beam.

GPU-accelerated micromagnetic simulations using cloud computing

Energy Technology Data Exchange (ETDEWEB)

Jermain, C.L., E-mail: clj72@cornell.edu [Cornell University, Ithaca, NY 14853 (United States); Rowlands, G.E.; Buhrman, R.A. [Cornell University, Ithaca, NY 14853 (United States); Ralph, D.C. [Cornell University, Ithaca, NY 14853 (United States); Kavli Institute at Cornell, Ithaca, NY 14853 (United States)

2016-03-01

Highly parallel graphics processing units (GPUs) can improve the speed of micromagnetic simulations significantly as compared to conventional computing using central processing units (CPUs). We present a strategy for performing GPU-accelerated micromagnetic simulations by utilizing cost-effective GPU access offered by cloud computing services with an open-source Python-based program for running the MuMax3 micromagnetics code remotely. We analyze the scaling and cost benefits of using cloud computing for micromagnetics. - Highlights: • The benefits of cloud computing for GPU-accelerated micromagnetics are examined. • We present the MuCloud software for running simulations on cloud computing. • Simulation run times are measured to benchmark cloud computing performance. • Comparison benchmarks are analyzed between CPU and GPU based solvers.

GPU-accelerated micromagnetic simulations using cloud computing

International Nuclear Information System (INIS)

Jermain, C.L.; Rowlands, G.E.; Buhrman, R.A.; Ralph, D.C.

2016-01-01

Highly parallel graphics processing units (GPUs) can improve the speed of micromagnetic simulations significantly as compared to conventional computing using central processing units (CPUs). We present a strategy for performing GPU-accelerated micromagnetic simulations by utilizing cost-effective GPU access offered by cloud computing services with an open-source Python-based program for running the MuMax3 micromagnetics code remotely. We analyze the scaling and cost benefits of using cloud computing for micromagnetics. - Highlights: • The benefits of cloud computing for GPU-accelerated micromagnetics are examined. • We present the MuCloud software for running simulations on cloud computing. • Simulation run times are measured to benchmark cloud computing performance. • Comparison benchmarks are analyzed between CPU and GPU based solvers.

Costs and clinical outcomes in individuals without known coronary artery disease undergoing coronary computed tomographic angiography from an analysis of Medicare category III transaction codes.

Science.gov (United States)

Min, James K; Shaw, Leslee J; Berman, Daniel S; Gilmore, Amanda; Kang, Ning

2008-09-15

Multidetector coronary computed tomographic angiography (CCTA) demonstrates high accuracy for the detection and exclusion of coronary artery disease (CAD) and predicts adverse prognosis. To date, opportunity costs relating the clinical and economic outcomes of CCTA compared with other methods of diagnosing CAD, such as myocardial perfusion single-photon emission computed tomography (SPECT), remain unknown. An observational, multicenter, patient-level analysis of patients without known CAD who underwent CCTA or SPECT was performed. Patients who underwent CCTA (n = 1,938) were matched to those who underwent SPECT (n = 7,752) on 8 demographic and clinical characteristics and 2 summary measures of cardiac medications and co-morbidities and were evaluated for 9-month expenditures and clinical outcomes. Adjusted total health care and CAD expenditures were 27% (p cost-efficient alternative to SPECT for the initial coronary evaluation of patients without known CAD.

Who Should Bear the Cost of Convenience? A Cost-effectiveness Analysis Comparing External Beam and Brachytherapy Radiotherapy Techniques for Early Stage Breast Cancer.

Science.gov (United States)

McGuffin, M; Merino, T; Keller, B; Pignol, J-P

2017-03-01

Standard treatment for early breast cancer includes whole breast irradiation (WBI) after breast-conserving surgery. Recently, accelerated partial breast irradiation (APBI) has been proposed for well-selected patients. A cost and cost-effectiveness analysis was carried out comparing WBI with two APBI techniques. An activity-based costing method was used to determine the treatment cost from a societal perspective of WBI, high dose rate brachytherapy (HDR) and permanent breast seed implants (PBSI). A Markov model comparing the three techniques was developed with downstream costs, utilities and probabilities adapted from the literature. Sensitivity analyses were carried out for a wide range of variables, including treatment costs, patient costs, utilities and probability of developing recurrences. Overall, HDR was the most expensive ($14 400), followed by PBSI ($8700), with WBI proving the least expensive ($6200). The least costly method to the health care system was WBI, whereas PBSI and HDR were less costly for the patient. Under cost-effectiveness analyses, downstream costs added about $10 000 to the total societal cost of the treatment. As the outcomes are very similar between techniques, WBI dominated under cost-effectiveness analyses. WBI was found to be the most cost-effective radiotherapy technique for early breast cancer. However, both APBI techniques were less costly to the patient. Although innovation may increase costs for the health care system it can provide cost savings for the patient in addition to convenience. Copyright © 2016 The Royal College of Radiologists. Published by Elsevier Ltd. All rights reserved.

Design and implementation of a reliable and cost-effective cloud computing infrastructure: the INFN Napoli experience

International Nuclear Information System (INIS)

Capone, V; Esposito, R; Pardi, S; Taurino, F; Tortone, G

2012-01-01

Over the last few years we have seen an increasing number of services and applications needed to manage and maintain cloud computing facilities. This is particularly true for computing in high energy physics, which often requires complex configurations and distributed infrastructures. In this scenario a cost effective rationalization and consolidation strategy is the key to success in terms of scalability and reliability. In this work we describe an IaaS (Infrastructure as a Service) cloud computing system, with high availability and redundancy features, which is currently in production at INFN-Naples and ATLAS Tier-2 data centre. The main goal we intended to achieve was a simplified method to manage our computing resources and deliver reliable user services, reusing existing hardware without incurring heavy costs. A combined usage of virtualization and clustering technologies allowed us to consolidate our services on a small number of physical machines, reducing electric power costs. As a result of our efforts we developed a complete solution for data and computing centres that can be easily replicated using commodity hardware. Our architecture consists of 2 main subsystems: a clustered storage solution, built on top of disk servers running GlusterFS file system, and a virtual machines execution environment. GlusterFS is a network file system able to perform parallel writes on multiple disk servers, providing this way live replication of data. High availability is also achieved via a network configuration using redundant switches and multiple paths between hypervisor hosts and disk servers. We also developed a set of management scripts to easily perform basic system administration tasks such as automatic deployment of new virtual machines, adaptive scheduling of virtual machines on hypervisor hosts, live migration and automated restart in case of hypervisor failures.

Design and implementation of a reliable and cost-effective cloud computing infrastructure: the INFN Napoli experience

Science.gov (United States)

Capone, V.; Esposito, R.; Pardi, S.; Taurino, F.; Tortone, G.

2012-12-01

Over the last few years we have seen an increasing number of services and applications needed to manage and maintain cloud computing facilities. This is particularly true for computing in high energy physics, which often requires complex configurations and distributed infrastructures. In this scenario a cost effective rationalization and consolidation strategy is the key to success in terms of scalability and reliability. In this work we describe an IaaS (Infrastructure as a Service) cloud computing system, with high availability and redundancy features, which is currently in production at INFN-Naples and ATLAS Tier-2 data centre. The main goal we intended to achieve was a simplified method to manage our computing resources and deliver reliable user services, reusing existing hardware without incurring heavy costs. A combined usage of virtualization and clustering technologies allowed us to consolidate our services on a small number of physical machines, reducing electric power costs. As a result of our efforts we developed a complete solution for data and computing centres that can be easily replicated using commodity hardware. Our architecture consists of 2 main subsystems: a clustered storage solution, built on top of disk servers running GlusterFS file system, and a virtual machines execution environment. GlusterFS is a network file system able to perform parallel writes on multiple disk servers, providing this way live replication of data. High availability is also achieved via a network configuration using redundant switches and multiple paths between hypervisor hosts and disk servers. We also developed a set of management scripts to easily perform basic system administration tasks such as automatic deployment of new virtual machines, adaptive scheduling of virtual machines on hypervisor hosts, live migration and automated restart in case of hypervisor failures.

Server Operation and Virtualization to Save Energy and Cost in Future Sustainable Computing

Directory of Open Access Journals (Sweden)

Jun-Ho Huh

2018-06-01

% compared to existing network equipment. The technique proposed in this study is expected to be a foundation technology for future sustainability computing.

The truncated conjugate gradient (TCG), a non-iterative/fixed-cost strategy for computing polarization in molecular dynamics: Fast evaluation of analytical forces

Science.gov (United States)

Aviat, Félix; Lagardère, Louis; Piquemal, Jean-Philip

2017-10-01

In a recent paper [F. Aviat et al., J. Chem. Theory Comput. 13, 180-190 (2017)], we proposed the Truncated Conjugate Gradient (TCG) approach to compute the polarization energy and forces in polarizable molecular simulations. The method consists in truncating the conjugate gradient algorithm at a fixed predetermined order leading to a fixed computational cost and can thus be considered "non-iterative." This gives the possibility to derive analytical forces avoiding the usual energy conservation (i.e., drifts) issues occurring with iterative approaches. A key point concerns the evaluation of the analytical gradients, which is more complex than that with a usual solver. In this paper, after reviewing the present state of the art of polarization solvers, we detail a viable strategy for the efficient implementation of the TCG calculation. The complete cost of the approach is then measured as it is tested using a multi-time step scheme and compared to timings using usual iterative approaches. We show that the TCG methods are more efficient than traditional techniques, making it a method of choice for future long molecular dynamics simulations using polarizable force fields where energy conservation matters. We detail the various steps required for the implementation of the complete method by software developers.

Comparing the performance of SIMD computers by running large air pollution models

DEFF Research Database (Denmark)

Brown, J.; Hansen, Per Christian; Wasniewski, J.

1996-01-01

To compare the performance and use of three massively parallel SIMD computers, we implemented a large air pollution model on these computers. Using a realistic large-scale model, we gained detailed insight about the performance of the computers involved when used to solve large-scale scientific...... problems that involve several types of numerical computations. The computers used in our study are the Connection Machines CM-200 and CM-5, and the MasPar MP-2216...

The cost-effectiveness and cost-utility of high-dose palliative radiotherapy for advanced non-small-cell lung cancer

International Nuclear Information System (INIS)

Coy, Peter; Schaafsma, Joseph; Schofield, John A.

2000-01-01

Purpose: To compute cost-effectiveness/cost-utility (CE/CU) ratios, from the treatment clinic and societal perspectives, for high-dose palliative radiotherapy treatment (RT) for advanced non-small-cell lung cancer (NSCLC) against best supportive care (BSC) as comparator, and thereby demonstrate a method for computing CE/CU ratios when randomized clinical trial (RCT) data cannot be generated. Methods and Materials: Unit cost estimates based on an earlier reported 1989-90 analysis of treatment costs at the Vancouver Island Cancer Centre, Victoria, British Columbia, Canada, are updated to 1997-1998 and then used to compute the incremental cost of an average dose of high-dose palliative RT. The incremental number of life days and quality-adjusted life days (QALDs) attributable to treatment are from earlier reported regression analyses of the survival and quality-of-life data from patients who enrolled prospectively in a lung cancer management cost-effectiveness study at the clinic over a 2-year period from 1990 to 1992. Results: The baseline CE and CU ratios are $9245 Cdn per life year (LY) and $12,836 per quality-adjusted life year (QALY), respectively, from the clinic perspective; and $12,253/LY and $17,012/QALY, respectively, from the societal perspective. Multivariate sensitivity analysis for the CE ratio produces a range of $5513-28,270/LY from the clinic perspective, and $7307-37,465/LY from the societal perspective. Similar calculations for the CU ratio produce a range of $7205-37,134/QALY from the clinic perspective, and $9550-49,213/QALY from the societal perspective. Conclusion: The cost effectiveness and cost utility of high-dose palliative RT for advanced NSCLC compares favorably with the cost effectiveness of other forms of treatment for NSCLC, of treatments of other forms of cancer, and of many other commonly used medical interventions; and lies within the US $50,000/QALY benchmark often cited for cost-effective care

Energy- and cost-efficient lattice-QCD computations using graphics processing units

Energy Technology Data Exchange (ETDEWEB)

Bach, Matthias

2014-07-01

Quarks and gluons are the building blocks of all hadronic matter, like protons and neutrons. Their interaction is described by Quantum Chromodynamics (QCD), a theory under test by large scale experiments like the Large Hadron Collider (LHC) at CERN and in the future at the Facility for Antiproton and Ion Research (FAIR) at GSI. However, perturbative methods can only be applied to QCD for high energies. Studies from first principles are possible via a discretization onto an Euclidean space-time grid. This discretization of QCD is called Lattice QCD (LQCD) and is the only ab-initio option outside of the high-energy regime. LQCD is extremely compute and memory intensive. In particular, it is by definition always bandwidth limited. Thus - despite the complexity of LQCD applications - it led to the development of several specialized compute platforms and influenced the development of others. However, in recent years General-Purpose computation on Graphics Processing Units (GPGPU) came up as a new means for parallel computing. Contrary to machines traditionally used for LQCD, graphics processing units (GPUs) are a massmarket product. This promises advantages in both the pace at which higher-performing hardware becomes available and its price. CL2QCD is an OpenCL based implementation of LQCD using Wilson fermions that was developed within this thesis. It operates on GPUs by all major vendors as well as on central processing units (CPUs). On the AMD Radeon HD 7970 it provides the fastest double-precision D kernel for a single GPU, achieving 120GFLOPS. D - the most compute intensive kernel in LQCD simulations - is commonly used to compare LQCD platforms. This performance is enabled by an in-depth analysis of optimization techniques for bandwidth-limited codes on GPUs. Further, analysis of the communication between GPU and CPU, as well as between multiple GPUs, enables high-performance Krylov space solvers and linear scaling to multiple GPUs within a single system. LQCD

Energy- and cost-efficient lattice-QCD computations using graphics processing units

International Nuclear Information System (INIS)

Bach, Matthias

2014-01-01

Quarks and gluons are the building blocks of all hadronic matter, like protons and neutrons. Their interaction is described by Quantum Chromodynamics (QCD), a theory under test by large scale experiments like the Large Hadron Collider (LHC) at CERN and in the future at the Facility for Antiproton and Ion Research (FAIR) at GSI. However, perturbative methods can only be applied to QCD for high energies. Studies from first principles are possible via a discretization onto an Euclidean space-time grid. This discretization of QCD is called Lattice QCD (LQCD) and is the only ab-initio option outside of the high-energy regime. LQCD is extremely compute and memory intensive. In particular, it is by definition always bandwidth limited. Thus - despite the complexity of LQCD applications - it led to the development of several specialized compute platforms and influenced the development of others. However, in recent years General-Purpose computation on Graphics Processing Units (GPGPU) came up as a new means for parallel computing. Contrary to machines traditionally used for LQCD, graphics processing units (GPUs) are a massmarket product. This promises advantages in both the pace at which higher-performing hardware becomes available and its price. CL2QCD is an OpenCL based implementation of LQCD using Wilson fermions that was developed within this thesis. It operates on GPUs by all major vendors as well as on central processing units (CPUs). On the AMD Radeon HD 7970 it provides the fastest double-precision D kernel for a single GPU, achieving 120GFLOPS. D - the most compute intensive kernel in LQCD simulations - is commonly used to compare LQCD platforms. This performance is enabled by an in-depth analysis of optimization techniques for bandwidth-limited codes on GPUs. Further, analysis of the communication between GPU and CPU, as well as between multiple GPUs, enables high-performance Krylov space solvers and linear scaling to multiple GPUs within a single system. LQCD

Computational cost of isogeometric multi-frontal solvers on parallel distributed memory machines

KAUST Repository

Woźniak, Maciej

2015-02-01

This paper derives theoretical estimates of the computational cost for isogeometric multi-frontal direct solver executed on parallel distributed memory machines. We show theoretically that for the Cp-1 global continuity of the isogeometric solution, both the computational cost and the communication cost of a direct solver are of order O(log(N)p2) for the one dimensional (1D) case, O(Np2) for the two dimensional (2D) case, and O(N4/3p2) for the three dimensional (3D) case, where N is the number of degrees of freedom and p is the polynomial order of the B-spline basis functions. The theoretical estimates are verified by numerical experiments performed with three parallel multi-frontal direct solvers: MUMPS, PaStiX and SuperLU, available through PETIGA toolkit built on top of PETSc. Numerical results confirm these theoretical estimates both in terms of p and N. For a given problem size, the strong efficiency rapidly decreases as the number of processors increases, becoming about 20% for 256 processors for a 3D example with 1283 unknowns and linear B-splines with C0 global continuity, and 15% for a 3D example with 643 unknowns and quartic B-splines with C3 global continuity. At the same time, one cannot arbitrarily increase the problem size, since the memory required by higher order continuity spaces is large, quickly consuming all the available memory resources even in the parallel distributed memory version. Numerical results also suggest that the use of distributed parallel machines is highly beneficial when solving higher order continuity spaces, although the number of processors that one can efficiently employ is somehow limited.

Analyze image quality and comparative study between conventional and computed radiography applied to the inspection of alloys

International Nuclear Information System (INIS)

Machado, Alessandra S.; Oliveira, Davi F.; Silva, Aline S.S.; Nascimento, Joseilson R.; Lopes, Ricardo T.

2011-01-01

Piping system design takes into account relevant factors such as: internal coating, dimensioning, vibration system, adequate supports and principally, piping material. Cost is a decisive factor in the phase of material selection. The non-destructive testing method most commonly employed in industry to analyze the structure of an object is radiographic testing. Computed radiography (CR) is a quicker and much more efficient alternative to conventional radiography but, although CR presents numerous advantages, testing procedures are still largely based on trial and error, due to the lack of a consecrated methodology to choose parameters as it exists for conventional radiography. Notwithstanding, this paper presents a study that uses the technique of computed radiography to analyze metal alloys. These metal alloys are used as internal pipe coating aiming to protect against corrosion and cracks. This study seeks to evaluate parameters such as basic spatial resolution, Normalized Signal-to-Noise Ratio (SNRN), contrast, intensity and also to compare conventional radiography with CR. (author)

Effectiveness and cost-effectiveness of computer and other electronic aids for smoking cessation: a systematic review and network meta-analysis.

Science.gov (United States)

Chen, Y-F; Madan, J; Welton, N; Yahaya, I; Aveyard, P; Bauld, L; Wang, D; Fry-Smith, A; Munafò, M R

2012-01-01

of ongoing studies including National Institute for Health Research (NIHR) Clinical Research Network Portfolio Database, Current Controlled Trials and ClinicalTrials.gov were also searched, and further information was sought from contacts with experts. Randomised controlled trials (RCTs) and quasi-RCTs evaluating smoking cessation programmes that utilise computer, internet, mobile telephone or other electronic aids in adult smokers were included in the effectiveness review. Relevant studies of other design were included in the cost-effectiveness review and supplementary review. Pair-wise meta-analyses using both random- and fixed-effects models were carried out. Bayesian mixed-treatment comparisons (MTCs) were also performed. A de novo decision-analytical model was constructed for estimating the cost-effectiveness of interventions. Expected value of perfect information (EVPI) was calculated. Narrative synthesis of key themes and issues that may influence the acceptability and usability of electronic aids was provided in the supplementary review. This effectiveness review included 60 RCTs/quasi-RCTs reported in 77 publications. Pooled estimate for prolonged abstinence [relative risk (RR) = 1.32, 95% confidence interval (CI) 1.21 to 1.45] and point prevalence abstinence (RR = 1.14, 95% CI 1.07 to 1.22) suggested that computer and other electronic aids increase the likelihood of cessation compared with no intervention or generic self-help materials. There was no significant difference in effect sizes between aid to cessation studies (which provide support to smokers who are ready to quit) and cessation induction studies (which attempt to encourage a cessation attempt in smokers who are not yet ready to quit). Results from MTC also showed small but significant intervention effect (time to relapse, mean hazard ratio 0.87, 95% credible interval 0.83 to 0.92). Cost-threshold analyses indicated some form of electronic intervention is likely to be cost-effective when added to

Cost of Cardiac Surgery in Frail Compared With Nonfrail Older Adults.

Science.gov (United States)

Goldfarb, Michael; Bendayan, Melissa; Rudski, Lawrence G; Morin, Jean-Francois; Langlois, Yves; Ma, Felix; Lachapelle, Kevin; Cecere, Renzo; DeVarennes, Benoit; Tchervenkov, Christo I; Brophy, James M; Afilalo, Jonathan

2017-08-01

Frailty is a risk factor for mortality, morbidity, and prolonged length of stay after cardiac surgery, all of which are major drivers of hospitalization costs. The incremental hospitalization costs incurred in frail patients have yet to be elucidated. Patients aged ≥ 60 years were evaluated for frailty before coronary artery bypass grafting or heart valve surgery at 2 academic centres between 2013 and 2015 as part of the McGill Frailty Registry. Total costs were summed from the date of the index surgery to the date of hospital discharge. Mutivariable linear regression was used to determine the association between preoperative frailty status and total costs after adjusting for conventional surgical risk factors. Among 235 patients included in the analysis, the median age was 73.0 years (interquartile range [IQR], 70.0-78.0 years) and 68 (29%) were women. The median cost was $32,742 (IQR, $23,221-$49,627) in 91 frail patients compared with $23,370 (IQR, $19,977-$29,705) in 144 nonfrail patients. Seven extreme-cost cases > $100,000 were identified, and all of the patients in these cases exhibited baseline frailty. In the multivariable model, total costs were independently associated with frailty (adjusted additional cost, $21,245; 95% confidence interval [CI], $12,418-$30,073; P cost, $20,600; 95% CI, $9,661-$31,539; P costs after cardiac surgery, an effect that persists after adjusting for age, sex, surgery type, and surgical risk score. Further efforts are needed to optimize care and resource use in this vulnerable population. Copyright © 2017 Canadian Cardiovascular Society. Published by Elsevier Inc. All rights reserved.

Cost-effectiveness of azacitidine compared with low-doses of chemotherapy (LDC in myelodysplastic syndrome (MDS

Directory of Open Access Journals (Sweden)

Myrna Candelaria-Hernández

2017-06-01

Full Text Available ABSTRACTIntroductionMyelodysplastic syndrome (MDS comprises a group of clonal hematological disorders, characterized by ineffective hematopoiesis and progressive bone marrow failure. It increases the risk of transformation to acute myeloid leukemia (AML. Therapeutic benefit should include overall survival increase (OS, hematological improvement, transfusion dependence and time to progression to AML decrease.ObjectiveAssess, from a Mexican health-care perspective, the cost-effectiveness of azacitidine compared with low-doses of chemotherapy (LDC plus best supportive care (BSC for the treatment of adult patients with intermediate-2 and high-risk MDS, who are not eligible for hematopoietic stem-cell transplantation. We developed a cost-effectiveness survival analysis model of three stages: MDS, AML, and death. OS and costs are extrapolated beyond three-year time horizon. Discount rate of 5% was applied. To estimate the model cycle probability transition to mortality state, survival curves were constructed for each treatment arm using individual patient-level data from Study AZA-001. Unitary costs are from public price list, and profiles for the management of MDS and AML were collected separately using a structured questionnaire. Probabilistic sensitivity analyses (PSA were conducted by simultaneously sampling from estimated probability distributions of model parameters.ResultsOverall survival was projected to increase by 72.26 weeks with azacitidine. Incremental expected total costs for azacitidine compared to LDC was MXN$68,045. However, the cost of the drug therapy was lower with azacitidine. The incremental cost-effectiveness ratio (ICER for azacitidine compared to LDC was MXN$48,932 per life-year gained (LYG. PSA showed that azacitidine was a highly cost-effective option in 96.49% of the simulated cases in MXN$180,000/LYG willingness-to-pay.ConclusionsCompared with LDC, azacitidine represents a cost-effective treatment alternative in patients

Computer-Aided Modelling and Analysis of PV Systems: A Comparative Study

Directory of Open Access Journals (Sweden)

Charalambos Koukouvaos

2014-01-01

Full Text Available Modern scientific advances have enabled remarkable efficacy for photovoltaic systems with regard to the exploitation of solar energy, boosting them into having a rapidly growing position among the systems developed for the production of renewable energy. However, in many cases the design, analysis, and control of photovoltaic systems are tasks which are quite complex and thus difficult to be carried out. In order to cope with this kind of problems, appropriate software tools have been developed either as standalone products or parts of general purpose software platforms used to model and simulate the generation, transmission, and distribution of solar energy. The utilization of this kind of software tools may be extremely helpful to the successful performance evaluation of energy systems with maximum accuracy and minimum cost in time and effort. The work presented in this paper aims on a first level at the performance analysis of various configurations of photovoltaic systems through computer-aided modelling. On a second level, it provides a comparative evaluation of the credibility of two of the most advanced graphical programming environments, namely, Simulink and LabVIEW, with regard to their application in photovoltaic systems.

Specialized computer architectures for computational aerodynamics

Science.gov (United States)

Stevenson, D. K.

1978-01-01

In recent years, computational fluid dynamics has made significant progress in modelling aerodynamic phenomena. Currently, one of the major barriers to future development lies in the compute-intensive nature of the numerical formulations and the relative high cost of performing these computations on commercially available general purpose computers, a cost high with respect to dollar expenditure and/or elapsed time. Today's computing technology will support a program designed to create specialized computing facilities to be dedicated to the important problems of computational aerodynamics. One of the still unresolved questions is the organization of the computing components in such a facility. The characteristics of fluid dynamic problems which will have significant impact on the choice of computer architecture for a specialized facility are reviewed.

Cost Analysis of Noninvasive Helmet Ventilation Compared with Use of Noninvasive Face Mask in ARDS

Directory of Open Access Journals (Sweden)

Kwadwo Kyeremanteng

2018-01-01

Full Text Available Intensive care unit (ICU costs have doubled since 2000, totalling 108 billion dollars per year. Acute respiratory distress syndrome (ARDS has a prevalence of 10.4% and a 28-day mortality of 34.8%. Noninvasive ventilation (NIV is used in up to 30% of cases. A recent randomized controlled trial by Patel et al. (2016 showed lower intubation rates and 90-day mortality when comparing helmet to face mask NIV in ARDS. The population in the Patel et al. trial was used for cost analysis in this study. Projections of cost savings showed a decrease in ICU costs by $2527 and hospital costs by $3103 per patient, along with a 43.3% absolute reduction in intubation rates. Sensitivity analysis showed consistent cost reductions. Projected annual cost savings, assuming the current prevalence of ARDS, were $237538 in ICU costs and $291682 in hospital costs. At a national level, using yearly incidence of ARDS cases in American ICUs, this represents $449 million in savings. Helmet NIV, compared to face mask NIV, in nonintubated patients with ARDS, reduces ICU and hospital direct-variable costs along with intubation rates, LOS, and mortality. A large-scale cost-effectiveness analysis is needed to validate the findings.

Comparative costs of mobile and fixed-clinic primary health care ...

African Journals Online (AJOL)

The costs of different methods of delivering primary health care in a local authority through mobile and fixed-clinic services have been analysed and aspects of their costefficiency compared. The information gained from such an analysis can be used for management purposes to optimise both the use of resources and the ...

Comparative Analysis Between Computed and Conventional Inferior Alveolar Nerve Block Techniques.

Science.gov (United States)

Araújo, Gabriela Madeira; Barbalho, Jimmy Charles Melo; Dias, Tasiana Guedes de Souza; Santos, Thiago de Santana; Vasconcellos, Ricardo José de Holanda; de Morais, Hécio Henrique Araújo

2015-11-01

The aim of this randomized, double-blind, controlled trial was to compare the computed and conventional inferior alveolar nerve block techniques in symmetrically positioned inferior third molars. Both computed and conventional anesthetic techniques were performed in 29 healthy patients (58 surgeries) aged between 18 and 40 years. The anesthetic of choice was 2% lidocaine with 1: 200,000 epinephrine. The Visual Analogue Scale assessed the pain variable after anesthetic infiltration. Patient satisfaction was evaluated using the Likert Scale. Heart and respiratory rates, mean time to perform technique, and the need for additional anesthesia were also evaluated. Pain variable means were higher for the conventional technique as compared with computed, 3.45 ± 2.73 and 2.86 ± 1.96, respectively, but no statistically significant differences were found (P > 0.05). Patient satisfaction showed no statistically significant differences. The average computed technique runtime and the conventional were 3.85 and 1.61 minutes, respectively, showing statistically significant differences (P <0.001). The computed anesthetic technique showed lower mean pain perception, but did not show statistically significant differences when contrasted to the conventional technique.

Cost-effectiveness of implementing computed tomography screening for lung cancer in Taiwan.

Science.gov (United States)

Yang, Szu-Chun; Lai, Wu-Wei; Lin, Chien-Chung; Su, Wu-Chou; Ku, Li-Jung; Hwang, Jing-Shiang; Wang, Jung-Der

2017-06-01

A screening program for lung cancer requires more empirical evidence. Based on the experience of the National Lung Screening Trial (NLST), we developed a method to adjust lead-time bias and quality-of-life changes for estimating the cost-effectiveness of implementing computed tomography (CT) screening in Taiwan. The target population was high-risk (≥30 pack-years) smokers between 55 and 75 years of age. From a nation-wide, 13-year follow-up cohort, we estimated quality-adjusted life expectancy (QALE), loss-of-QALE, and lifetime healthcare expenditures per case of lung cancer stratified by pathology and stage. Cumulative stage distributions for CT-screening and no-screening were assumed equal to those for CT-screening and radiography-screening in the NLST to estimate the savings of loss-of-QALE and additional costs of lifetime healthcare expenditures after CT screening. Costs attributable to screen-negative subjects, false-positive cases and radiation-induced lung cancer were included to obtain the incremental cost-effectiveness ratio from the public payer's perspective. The incremental costs were US$22,755 per person. After dividing this by savings of loss-of-QALE (1.16 quality-adjusted life year (QALY)), the incremental cost-effectiveness ratio was US$19,683 per QALY. This ratio would fall to US$10,947 per QALY if the stage distribution for CT-screening was the same as that of screen-detected cancers in the NELSON trial. Low-dose CT screening for lung cancer among high-risk smokers would be cost-effective in Taiwan. As only about 5% of our women are smokers, future research is necessary to identify the high-risk groups among non-smokers and increase the coverage. Copyright © 2017 The Author(s). Published by Elsevier B.V. All rights reserved.

Strength and Reliability of Wood for the Components of Low-cost Wind Turbines: Computational and Experimental Analysis and Applications

DEFF Research Database (Denmark)

Mishnaevsky, Leon; Freere, Peter; Sharma, Ranjan

2009-01-01

of experiments and computational investigations. Low cost testing machines have been designed, and employed for the systematic analysis of different sorts of Nepali wood, to be used for the wind turbine construction. At the same time, computational micromechanical models of deformation and strength of wood......This paper reports the latest results of the comprehensive program of experimental and computational analysis of strength and reliability of wooden parts of low cost wind turbines. The possibilities of prediction of strength and reliability of different types of wood are studied in the series...... are developed, which should provide the basis for microstructure-based correlating of observable and service properties of wood. Some correlations between microstructure, strength and service properties of wood have been established....

Resource utilization and costs during the initial years of lung cancer screening with computed tomography in Canada.

Science.gov (United States)

Cressman, Sonya; Lam, Stephen; Tammemagi, Martin C; Evans, William K; Leighl, Natasha B; Regier, Dean A; Bolbocean, Corneliu; Shepherd, Frances A; Tsao, Ming-Sound; Manos, Daria; Liu, Geoffrey; Atkar-Khattra, Sukhinder; Cromwell, Ian; Johnston, Michael R; Mayo, John R; McWilliams, Annette; Couture, Christian; English, John C; Goffin, John; Hwang, David M; Puksa, Serge; Roberts, Heidi; Tremblay, Alain; MacEachern, Paul; Burrowes, Paul; Bhatia, Rick; Finley, Richard J; Goss, Glenwood D; Nicholas, Garth; Seely, Jean M; Sekhon, Harmanjatinder S; Yee, John; Amjadi, Kayvan; Cutz, Jean-Claude; Ionescu, Diana N; Yasufuku, Kazuhiro; Martel, Simon; Soghrati, Kamyar; Sin, Don D; Tan, Wan C; Urbanski, Stefan; Xu, Zhaolin; Peacock, Stuart J

2014-10-01

It is estimated that millions of North Americans would qualify for lung cancer screening and that billions of dollars of national health expenditures would be required to support population-based computed tomography lung cancer screening programs. The decision to implement such programs should be informed by data on resource utilization and costs. Resource utilization data were collected prospectively from 2059 participants in the Pan-Canadian Early Detection of Lung Cancer Study using low-dose computed tomography (LDCT). Participants who had 2% or greater lung cancer risk over 3 years using a risk prediction tool were recruited from seven major cities across Canada. A cost analysis was conducted from the Canadian public payer's perspective for resources that were used for the screening and treatment of lung cancer in the initial years of the study. The average per-person cost for screening individuals with LDCT was $453 (95% confidence interval [CI], $400-$505) for the initial 18-months of screening following a baseline scan. The screening costs were highly dependent on the detected lung nodule size, presence of cancer, screening intervention, and the screening center. The mean per-person cost of treating lung cancer with curative surgery was $33,344 (95% CI, $31,553-$34,935) over 2 years. This was lower than the cost of treating advanced-stage lung cancer with chemotherapy, radiotherapy, or supportive care alone, ($47,792; 95% CI, $43,254-$52,200; p = 0.061). In the Pan-Canadian study, the average cost to screen individuals with a high risk for developing lung cancer using LDCT and the average initial cost of curative intent treatment were lower than the average per-person cost of treating advanced stage lung cancer which infrequently results in a cure.

Low cost phantom for computed radiology; Objeto de teste de baixo custo para radiologia computadorizada

Energy Technology Data Exchange (ETDEWEB)

Travassos, Paulo Cesar B.; Magalhaes, Luis Alexandre G., E-mail: pctravassos@ufrj.br [Universidade do Estado do Rio de Janeiro (IBRGA/UERJ), RJ (Brazil). Laboratorio de Ciencias Radiologicas; Augusto, Fernando M.; Sant' Yves, Thalis L.A.; Goncalves, Elicardo A.S. [Instituto Nacional de Cancer (INCA), Rio de Janeiro, RJ (Brazil); Botelho, Marina A. [Hospital Universitario Pedro Ernesto (UERJ), Rio de Janeiro, RJ (Brazil)

2012-08-15

This article presents the results obtained from a low cost phantom, used to analyze Computed Radiology (CR) equipment. The phantom was constructed to test a few parameters related to image quality, as described in [1-9]. Materials which can be easily purchased were used in the construction of the phantom, with total cost of approximately U$100.00. A bar pattern was placed only to verify the efficacy of the grids in the spatial resolution determination, and was not included in the budget because the data was acquired from the grids. (author)

Designer's unified cost model

Science.gov (United States)

Freeman, William T.; Ilcewicz, L. B.; Swanson, G. D.; Gutowski, T.

1992-01-01

A conceptual and preliminary designers' cost prediction model has been initiated. The model will provide a technically sound method for evaluating the relative cost of different composite structural designs, fabrication processes, and assembly methods that can be compared to equivalent metallic parts or assemblies. The feasibility of developing cost prediction software in a modular form for interfacing with state of the art preliminary design tools and computer aided design programs is being evaluated. The goal of this task is to establish theoretical cost functions that relate geometric design features to summed material cost and labor content in terms of process mechanics and physics. The output of the designers' present analytical tools will be input for the designers' cost prediction model to provide the designer with a data base and deterministic cost methodology that allows one to trade and synthesize designs with both cost and weight as objective functions for optimization. The approach, goals, plans, and progress is presented for development of COSTADE (Cost Optimization Software for Transport Aircraft Design Evaluation).

Cost-utility of enoxaparin compared with unfractionated heparin in unstable coronary artery disease

Directory of Open Access Journals (Sweden)

Milne Ruairidh

2001-10-01

Full Text Available Abstract Background Low molecular weight heparins hold several advantages over unfractionated heparin including convenience of administration. Enoxaparin is one such heparin licensed in the UK for use in unstable coronary artery disease (unstable stable angina and non-Q wave myocardial infarction. In these patients, two large randomised controlled trials and their meta-analysis showed small benefits for enoxaparin over unfractionated heparin at 30–43 days and potentially at one year. We found no relevant published full economic evaluations, only cost studies, one of which was conducted in the UK. The other studies, from the US, Canada and France, are difficult to interpret since their resource use and costs may not reflect UK practice. Methods We aimed to compare the benefits and costs of short-term treatment (two to eight days with enoxaparin and unfractionated heparin in unstable coronary artery disease. We used published data sources to estimate the incremental cost per quality adjusted life year (QALY, adopting a NHS perspective and using 1998 prices. Results The base case was a 0.013 QALY gain and net cost saving of £317 per person treated with enoxaparin instead of unfractionated heparin. All but one sensitivity analysis showed net savings and QALY gains, the exception (the worst case being a cost per QALY of £3,305. Best cases were a £495 saving and 0.013 QALY gain, or a £317 saving and 0.014 QALY gain per person. Conclusions Enoxaparin appears cost saving compared with unfractionated heparin in patients with unstable coronary artery disease. However, cost implications depend on local revascularisation practice.

Comparing surgical trays with redundant instruments with trays with reduced instruments: a cost analysis.

Science.gov (United States)

John-Baptiste, A; Sowerby, L J; Chin, C J; Martin, J; Rotenberg, B W

2016-01-01

When prearranged standard surgical trays contain instruments that are repeatedly unused, the redundancy can result in unnecessary health care costs. Our objective was to estimate potential savings by performing an economic evaluation comparing the cost of surgical trays with redundant instruments with surgical trays with reduced instruments ("reduced trays"). We performed a cost-analysis from the hospital perspective over a 1-year period. Using a mathematical model, we compared the direct costs of trays containing redundant instruments to reduced trays for 5 otolaryngology procedures. We incorporated data from several sources including local hospital data on surgical volume, the number of instruments on redundant and reduced trays, wages of personnel and time required to pack instruments. From the literature, we incorporated instrument depreciation costs and the time required to decontaminate an instrument. We performed 1-way sensitivity analyses on all variables, including surgical volume. Costs were estimated in 2013 Canadian dollars. The cost of redundant trays was $21 806 and the cost of reduced trays was $8803, for a 1-year cost saving of $13 003. In sensitivity analyses, cost savings ranged from $3262 to $21 395, based on the surgical volume at the institution. Variation in surgical volume resulted in a wider range of estimates, with a minimum of $3253 for low-volume to a maximum of $52 012 for high-volume institutions. Our study suggests moderate savings may be achieved by reducing surgical tray redundancy and, if applied to other surgical specialties, may result in savings to Canadian health care systems.

Framework for Computation Offloading in Mobile Cloud Computing

Directory of Open Access Journals (Sweden)

Dejan Kovachev

2012-12-01

Full Text Available The inherently limited processing power and battery lifetime of mobile phones hinder the possible execution of computationally intensive applications like content-based video analysis or 3D modeling. Offloading of computationally intensive application parts from the mobile platform into a remote cloud infrastructure or nearby idle computers addresses this problem. This paper presents our Mobile Augmentation Cloud Services (MACS middleware which enables adaptive extension of Android application execution from a mobile client into the cloud. Applications are developed by using the standard Android development pattern. The middleware does the heavy lifting of adaptive application partitioning, resource monitoring and computation offloading. These elastic mobile applications can run as usual mobile application, but they can also use remote computing resources transparently. Two prototype applications using the MACS middleware demonstrate the benefits of the approach. The evaluation shows that applications, which involve costly computations, can benefit from offloading with around 95% energy savings and significant performance gains compared to local execution only.

Estimating the cost-effectiveness of stroke units in France compared with conventional care.

Science.gov (United States)

Launois, R; Giroud, M; Mégnigbêto, A C; Le Lay, K; Présenté, G; Mahagne, M H; Durand, I; Gaudin, A F

2004-03-01

The incidence of stroke in France is estimated at between 120 000 and 150 000 cases per year. This modeling study assessed the clinical and economic benefits of establishing specialized stroke units compared with conventional care. Data from the Dijon stroke registry were used to determine healthcare trajectories according to the degree of autonomy and organization of patient care. The relative risks of death or institutionalization or death or dependence after passage through a stroke unit were compared with conventional care. These risks were then inserted with the costing data into a Markov model to estimate the cost-effectiveness of stroke units. Patients cared for in a stroke unit survive more trimesters without sequelae in the 5 years after hospitalization than those cared for conventionally (11.6 versus 8.28 trimesters). The mean cost per patient at 5 years was estimated at 30 983 for conventional care and 34 638 in a stroke unit. An incremental cost-effectiveness ratio for stroke units of 1359 per year of life gained without disability was estimated. The cost-effectiveness ratio for stroke units is much lower than the threshold (53 400 ) of acceptability recognized by the international scientific community. This finding justifies organizational changes in the management of stroke patients and the establishment of stroke units in France.

Uranium solution mining cost estimating technique: means for rapid comparative analysis of deposits

International Nuclear Information System (INIS)

Anon.

1978-01-01

Twelve graphs provide a technique for determining relative cost ranges for uranium solution mining projects. The use of the technique can provide a consistent framework for rapid comparative analysis of various properties of mining situations. The technique is also useful to determine the sensitivities of cost figures to incremental changes in mining factors or deposit characteristics

Comparing the Cost-Effectiveness of Simulation Modalities: A Case Study of Peripheral Intravenous Catheterization Training

Science.gov (United States)

Isaranuwatchai, Wanrudee; Brydges, Ryan; Carnahan, Heather; Backstein, David; Dubrowski, Adam

2014-01-01

While the ultimate goal of simulation training is to enhance learning, cost-effectiveness is a critical factor. Research that compares simulation training in terms of educational- and cost-effectiveness will lead to better-informed curricular decisions. Using previously published data we conducted a cost-effectiveness analysis of three…

Feasibility Study and Cost Benefit Analysis of Thin-Client Computer System Implementation Onboard United States Navy Ships

National Research Council Canada - National Science Library

Arbulu, Timothy D; Vosberg, Brian J

2007-01-01

The purpose of this MBA project was to conduct a feasibility study and a cost benefit analysis of using thin-client computer systems instead of traditional networks onboard United States Navy ships...

Computational sensing of herpes simplex virus using a cost-effective on-chip microscope

KAUST Repository

Ray, Aniruddha

2017-07-03

Caused by the herpes simplex virus (HSV), herpes is a viral infection that is one of the most widespread diseases worldwide. Here we present a computational sensing technique for specific detection of HSV using both viral immuno-specificity and the physical size range of the viruses. This label-free approach involves a compact and cost-effective holographic on-chip microscope and a surface-functionalized glass substrate prepared to specifically capture the target viruses. To enhance the optical signatures of individual viruses and increase their signal-to-noise ratio, self-assembled polyethylene glycol based nanolenses are rapidly formed around each virus particle captured on the substrate using a portable interface. Holographic shadows of specifically captured viruses that are surrounded by these self-assembled nanolenses are then reconstructed, and the phase image is used for automated quantification of the size of each particle within our large field-of-view, ~30 mm2. The combination of viral immuno-specificity due to surface functionalization and the physical size measurements enabled by holographic imaging is used to sensitively detect and enumerate HSV particles using our compact and cost-effective platform. This computational sensing technique can find numerous uses in global health related applications in resource-limited environments.

Welfare costs in patients with rheumatoid arthritis and their partners compared with matched controls

DEFF Research Database (Denmark)

Løppenthin, Katrine; Esbensen, Bente Appel; Østergaard, Mikkel

2017-01-01

collected from population-based registers in the period from 1998 to 2009. A total of 25,547 Danish patients with a diagnosis of RA and 15,660 of their partners were identified and compared with 101,755 randomly selected age- and gender-matched controls and 62,681 control partners. The direct and indirect...... costs were calculated for patients and their partners and compared to matched controls. These included inpatient and outpatient treatment, medication, income from employment and social transfer payments. Patients with RA had statistically significantly more inpatient and outpatient costs than control...... subjects, i.e., treatment (€346 vs. €211), hospitalization (€1261 vs. €778), and medication use (€654 vs. €393). The costs associated with the patients were present 11 years before diagnosis of RA (€1592) compared with control subjects (€1172). Furthermore, income from employment was lower for patients...

Cost-effectiveness analysis of HPV vaccination: comparing the general population with socially vulnerable individuals.

Science.gov (United States)

Han, Kyu-Tae; Kim, Sun Jung; Lee, Seo Yoon; Park, Eun-Cheol

2014-01-01

After the WHO recommended HPV vaccination of the general population in 2009, government support of HPV vaccination programs was increased in many countries. However, this policy was not implemented in Korea due to perceived low cost-effectiveness. Thus, the aim of this study was to analyze the cost-utility of HPV vaccination programs targeted to high risk populations as compared to vaccination programs for the general population. Each study population was set to 100,000 people in a simulation study to determine the incremental cost-utility ratio (ICUR), then standard prevalence rates, cost, vaccination rates, vaccine efficacy, and the Quality-Adjusted Life-Years (QALYs) were applied to the analysis. In addition, sensitivity analysis was performed by assuming discounted vaccination cost. In the socially vulnerable population, QALYs gained through HPV vaccination were higher than that of the general population (General population: 1,019, Socially vulnerable population: 5,582). The results of ICUR showed that the cost of HPV vaccination was higher for the general population than the socially vulnerable population. (General population: 52,279,255 KRW, Socially vulnerable population: 9,547,347 KRW). Compared with 24 million KRW/QALYs as the social threshold, vaccination of the general population was not cost-effective. In contrast, vaccination of the socially vulnerable population was strongly cost-effective. The results suggest the importance and necessity of government support of HPV vaccination programs targeted to socially vulnerable populations because a targeted approach is much more cost-effective. The implementation of government support for such vaccination programs is a critical strategy for decreasing the burden of HPV infection in Korea.

A Comprehensive and Cost-Effective Computer Infrastructure for K-12 Schools

Science.gov (United States)

Warren, G. P.; Seaton, J. M.

1996-01-01

Since 1993, NASA Langley Research Center has been developing and implementing a low-cost Internet connection model, including system architecture, training, and support, to provide Internet access for an entire network of computers. This infrastructure allows local area networks which exceed 50 machines per school to independently access the complete functionality of the Internet by connecting to a central site, using state-of-the-art commercial modem technology, through a single standard telephone line. By locating high-cost resources at this central site and sharing these resources and their costs among the school districts throughout a region, a practical, efficient, and affordable infrastructure for providing scale-able Internet connectivity has been developed. As the demand for faster Internet access grows, the model has a simple expansion path that eliminates the need to replace major system components and re-train personnel. Observations of optical Internet usage within an environment, particularly school classrooms, have shown that after an initial period of 'surfing,' the Internet traffic becomes repetitive. By automatically storing requested Internet information on a high-capacity networked disk drive at the local site (network based disk caching), then updating this information only when it changes, well over 80 percent of the Internet traffic that leaves a location can be eliminated by retrieving the information from the local disk cache.

Cost minimisation analysis of using acellular dermal matrix (Strattice™) for breast reconstruction compared with standard techniques.

Science.gov (United States)

Johnson, R K; Wright, C K; Gandhi, A; Charny, M C; Barr, L

2013-03-01

We performed a cost analysis (using UK 2011/12 NHS tariffs as a proxy for cost) comparing immediate breast reconstruction using the new one-stage technique of acellular dermal matrix (Strattice™) with implant versus the standard alternative techniques of tissue expander (TE)/implant as a two-stage procedure and latissimus dorsi (LD) flap reconstruction. Clinical report data were collected for operative time, length of stay, outpatient procedures, and number of elective and emergency admissions in our first consecutive 24 patients undergoing one-stage Strattice reconstruction. Total cost to the NHS based on tariff, assuming top-up payments to cover Strattice acquisition costs, was assessed and compared to the two historical control groups matched on key variables. Eleven patients having unilateral Strattice reconstruction were compared to 10 having TE/implant reconstruction and 10 having LD flap and implant reconstruction. Thirteen patients having bilateral Strattice reconstruction were compared to 12 having bilateral TE/implant reconstruction. Total costs were: unilateral Strattice, £3685; unilateral TE, £4985; unilateral LD and implant, £6321; bilateral TE, £5478; and bilateral Strattice, £6771. The cost analysis shows a financial advantage of using acellular dermal matrix (Strattice) in unilateral breast reconstruction versus alternative procedures. The reimbursement system in England (Payment by Results) is based on disease-related groups similar to that of many countries across Europe and tariffs are based on reported hospital costs, making this analysis of relevance in other countries. Copyright © 2013 Elsevier Ltd. All rights reserved.

A practical technique for benefit-cost analysis of computer-aided design and drafting systems

International Nuclear Information System (INIS)

Shah, R.R.; Yan, G.

1979-03-01

Analysis of benefits and costs associated with the operation of Computer-Aided Design and Drafting Systems (CADDS) are needed to derive economic justification for acquiring new systems, as well as to evaluate the performance of existing installations. In practice, however, such analyses are difficult to perform since most technical and economic advantages of CADDS are ΣirreduciblesΣ, i.e. cannot be readily translated into monetary terms. In this paper, a practical technique for economic analysis of CADDS in a drawing office environment is presented. A Σworst caseΣ approach is taken since increase in productivity of existing manpower is the only benefit considered, while all foreseen costs are taken into account. Methods of estimating benefits and costs are described. The procedure for performing the analysis is illustrated by a case study based on the drawing office activities at Atomic Energy of Canada Limited. (auth)

An Alternative Method for Computing Unit Costs and Productivity Ratios. AIR 1984 Annual Forum Paper.

Science.gov (United States)

Winstead, Wayland H.; And Others

An alternative measure for evaluating the performance of academic departments was studied. A comparison was made with the traditional manner for computing unit costs and productivity ratios: prorating the salary and effort of each faculty member to each course level based on the personal mix of course taught. The alternative method used averaging…

Cost and mortality impact of an algorithm-driven sepsis prediction system.

Science.gov (United States)

Calvert, Jacob; Hoffman, Jana; Barton, Christopher; Shimabukuro, David; Ries, Michael; Chettipally, Uli; Kerem, Yaniv; Jay, Melissa; Mataraso, Samson; Das, Ritankar

2017-06-01

To compute the financial and mortality impact of InSight, an algorithm-driven biomarker, which forecasts the onset of sepsis with minimal use of electronic health record data. This study compares InSight with existing sepsis screening tools and computes the differential life and cost savings associated with its use in the inpatient setting. To do so, mortality reduction is obtained from an increase in the number of sepsis cases correctly identified by InSight. Early sepsis detection by InSight is also associated with a reduction in length-of-stay, from which cost savings are directly computed. InSight identifies more true positive cases of severe sepsis, with fewer false alarms, than comparable methods. For an individual ICU with 50 beds, for example, it is determined that InSight annually saves 75 additional lives and reduces sepsis-related costs by $560,000. InSight performance results are derived from analysis of a single-center cohort. Mortality reduction results rely on a simplified use case, which fixes prediction times at 0, 1, and 2 h before sepsis onset, likely leading to under-estimates of lives saved. The corresponding cost reduction numbers are based on national averages for daily patient length-of-stay cost. InSight has the potential to reduce sepsis-related deaths and to lead to substantial cost savings for healthcare facilities.

Comparative Examination of Fair Value Accounting and Historical Cost Accountingin Perspective of Advantages and Disadvantages

OpenAIRE

Arı, Mustafa; Yılmaz, Rıfat

2015-01-01

In this study, it has examined that advantages and disadvantages of fair value accounting and historical cost accounting in comparatively. We discuss advantages and disadvantages of produced financial information according to fair value accounting and historical cost accounting in perspective of reliability, relavance, transparency, intelligibility, comparability, timeliness and financial stability. Literature review results of this study indicate that there are advantages and disadvantages b...

Wireless Cloud Computing on Guided Missile Destroyers: A Business Case Analysis

Science.gov (United States)

2013-06-01

Cloud Computing Network (WCCN) onboard Guided Missile Destroyers (DDGs) utilizing tablet computers. It compares the life cycle costs of WCCNs utilizing tablet computers over a mixed network of thin clients and desktop computers. Currently, the Consolidated Afloat Networks and Enterprise Services (CANES) program will install both thin clients and desktops on board new and old DDGs to implement the unclassified portion of its network. The main cost benefits of tablets will be realized through energy savings and an increase in productivity. The net present value of tablets is

Nuclear vs coal: comparing cost trends

International Nuclear Information System (INIS)

Harrer, B.; Nieves, L.

1981-01-01

The leading competitors in the new-capacity-addition options, from now to 1990, will be nuclear and coal-fired units. As an alternative viewpoint to the coal vs nuclear economic comparison presented in the October 1981 issue of Electrical World, this study represents an analysis of cost data for generating electricity from the two fuel sources. The economic impacts on nuclear and coal units of varying the levels of several key cost parameters are examined and analyzed. 13 figures

Comparing the social costs of biofuels and fossil fuels: A case study of Vietnam

NARCIS (Netherlands)

Thanh, le L.; Ierland, van E.C.; Zhu, X.; Wesseler, J.H.H.; Ngo, G.

2013-01-01

Biofuel substitution for fossil fuels has been recommended in the literature and promoted in many countries; however, there are concerns about its economic viability. In this paper we focus on the cost-effectiveness of fuels, i.e., we compare the social costs of biofuels and fossil fuels for a

Melanoma costs: a dynamic model comparing estimated overall costs of various clinical stages.

Science.gov (United States)

Alexandrescu, Doru Traian

2009-11-15

The rapidly increasing incidence of melanoma occurs at the same time as an increase in general healthcare costs, particularly the expenses associated with cancer care. Previous cost estimates in melanoma have not utilized a dynamic model considering the evolution of the disease and have not integrated the multiple costs associated with different aspects of medical interventions and patient-related factors. Futhermore, previous calculations have not been updated to reflect the modern tendencies in healthcare costs. We designed a comprehensive model of expenses in melanoma that considers the dynamic costs generated by the natural progression of the disease, which produces costs associated with treatment, surveillance, loss of income, and terminal care. The complete range of initial clinical (TNM) stages of the disease and initial tumor stages were analyzed in this model and the total healthcare costs for the five years following melanoma presentation at each particular stage were calculated. We have observed dramatic incremental total costs associated with progressively higher initial stages of the disease, ranging from a total of $4,648.48 for in situ tumors to $159,808.17 for Stage IV melanoma. By stage, early lesions associate 30-55 percent of their costs for the treatment of the primary tumor, due to a low rate of recurrence (local, regional, or distant), which limits the need for additional interventions. For in situ melanoma, T1a, and T1b, surveillance is an important contributor to the medical costs, accounting for more than 25 percent of the total cost over 5 years. In contrast, late lesions incur a much larger proportion of their associated costs (up to 80-85%) from the diagnosis and treatment of metastatic disease because of the increased propensity of those lesions to disseminate. This cost increases with increasing tumor stage (from $2,442.17 for T1a to $6,678.00 for T4b). The most expensive items in the medical care of patients with melanoma consist of

A Lightweight Distributed Framework for Computational Offloading in Mobile Cloud Computing

Science.gov (United States)

Shiraz, Muhammad; Gani, Abdullah; Ahmad, Raja Wasim; Adeel Ali Shah, Syed; Karim, Ahmad; Rahman, Zulkanain Abdul

2014-01-01

The latest developments in mobile computing technology have enabled intensive applications on the modern Smartphones. However, such applications are still constrained by limitations in processing potentials, storage capacity and battery lifetime of the Smart Mobile Devices (SMDs). Therefore, Mobile Cloud Computing (MCC) leverages the application processing services of computational clouds for mitigating resources limitations in SMDs. Currently, a number of computational offloading frameworks are proposed for MCC wherein the intensive components of the application are outsourced to computational clouds. Nevertheless, such frameworks focus on runtime partitioning of the application for computational offloading, which is time consuming and resources intensive. The resource constraint nature of SMDs require lightweight procedures for leveraging computational clouds. Therefore, this paper presents a lightweight framework which focuses on minimizing additional resources utilization in computational offloading for MCC. The framework employs features of centralized monitoring, high availability and on demand access services of computational clouds for computational offloading. As a result, the turnaround time and execution cost of the application are reduced. The framework is evaluated by testing prototype application in the real MCC environment. The lightweight nature of the proposed framework is validated by employing computational offloading for the proposed framework and the latest existing frameworks. Analysis shows that by employing the proposed framework for computational offloading, the size of data transmission is reduced by 91%, energy consumption cost is minimized by 81% and turnaround time of the application is decreased by 83.5% as compared to the existing offloading frameworks. Hence, the proposed framework minimizes additional resources utilization and therefore offers lightweight solution for computational offloading in MCC. PMID:25127245

A lightweight distributed framework for computational offloading in mobile cloud computing.

Directory of Open Access Journals (Sweden)

Muhammad Shiraz

Full Text Available The latest developments in mobile computing technology have enabled intensive applications on the modern Smartphones. However, such applications are still constrained by limitations in processing potentials, storage capacity and battery lifetime of the Smart Mobile Devices (SMDs. Therefore, Mobile Cloud Computing (MCC leverages the application processing services of computational clouds for mitigating resources limitations in SMDs. Currently, a number of computational offloading frameworks are proposed for MCC wherein the intensive components of the application are outsourced to computational clouds. Nevertheless, such frameworks focus on runtime partitioning of the application for computational offloading, which is time consuming and resources intensive. The resource constraint nature of SMDs require lightweight procedures for leveraging computational clouds. Therefore, this paper presents a lightweight framework which focuses on minimizing additional resources utilization in computational offloading for MCC. The framework employs features of centralized monitoring, high availability and on demand access services of computational clouds for computational offloading. As a result, the turnaround time and execution cost of the application are reduced. The framework is evaluated by testing prototype application in the real MCC environment. The lightweight nature of the proposed framework is validated by employing computational offloading for the proposed framework and the latest existing frameworks. Analysis shows that by employing the proposed framework for computational offloading, the size of data transmission is reduced by 91%, energy consumption cost is minimized by 81% and turnaround time of the application is decreased by 83.5% as compared to the existing offloading frameworks. Hence, the proposed framework minimizes additional resources utilization and therefore offers lightweight solution for computational offloading in MCC.

An Analysis of the Cost Effectiveness of Various Electronic Alternatives for Delivering Distance Education Compared to the Travel Costs for Live Instruction.

Science.gov (United States)

Caffarella, Edward; And Others

The feasibility and relative costs of four telecommunication systems for delivering university courses to distant locations in Colorado were compared. The four systems were compressed video, vertical blanking interval video, satellite video, and audiographic systems. Actual costs to install and operate each for a 5-year period were determined,…

Low-cost, high-performance and efficiency computational photometer design

Science.gov (United States)

Siewert, Sam B.; Shihadeh, Jeries; Myers, Randall; Khandhar, Jay; Ivanov, Vitaly

2014-05-01

Researchers at the University of Alaska Anchorage and University of Colorado Boulder have built a low cost high performance and efficiency drop-in-place Computational Photometer (CP) to test in field applications ranging from port security and safety monitoring to environmental compliance monitoring and surveying. The CP integrates off-the-shelf visible spectrum cameras with near to long wavelength infrared detectors and high resolution digital snapshots in a single device. The proof of concept combines three or more detectors into a single multichannel imaging system that can time correlate read-out, capture, and image process all of the channels concurrently with high performance and energy efficiency. The dual-channel continuous read-out is combined with a third high definition digital snapshot capability and has been designed using an FPGA (Field Programmable Gate Array) to capture, decimate, down-convert, re-encode, and transform images from two standard definition CCD (Charge Coupled Device) cameras at 30Hz. The continuous stereo vision can be time correlated to megapixel high definition snapshots. This proof of concept has been fabricated as a fourlayer PCB (Printed Circuit Board) suitable for use in education and research for low cost high efficiency field monitoring applications that need multispectral and three dimensional imaging capabilities. Initial testing is in progress and includes field testing in ports, potential test flights in un-manned aerial systems, and future planned missions to image harsh environments in the arctic including volcanic plumes, ice formation, and arctic marine life.

Two views of the comparative escalation of nuclear and coal-fired power plant costs

International Nuclear Information System (INIS)

Anon.

1982-01-01

Doan L. Phung critiques Charles Komanoff's 1981 book Power Plant Cost Escalation, which compares new nuclear plant costs unfavorably with those of new coal plants because of the increase in capital costs. Phung blames prophets of doom who ignore the escalating costs throughout the economy and now focus their anti-nuclear attacks in economic terms. Proposals by Alvin Weinberg and others to concentrate on reactor-safety improvements are used to conclude that these efforts will further expand the capital costs of nuclear plants and make them noncompetitive. Phung questions whether Komanoff's modeling considers enough of the political, regulatory, and technological factors to determine future costs. Komanoff replies by explaining his method of analysis and denying a bias against nuclear power. A postscript by Phung reiterates his criticism of simplistic calculations and extrapolations. 17 references

Designers' unified cost model

Science.gov (United States)

Freeman, W.; Ilcewicz, L.; Swanson, G.; Gutowski, T.

1992-01-01

The Structures Technology Program Office (STPO) at NASA LaRC has initiated development of a conceptual and preliminary designers' cost prediction model. The model will provide a technically sound method for evaluating the relative cost of different composite structural designs, fabrication processes, and assembly methods that can be compared to equivalent metallic parts or assemblies. The feasibility of developing cost prediction software in a modular form for interfacing with state-of-the-art preliminary design tools and computer aided design programs is being evaluated. The goal of this task is to establish theoretical cost functions that relate geometric design features to summed material cost and labor content in terms of process mechanics and physics. The output of the designers' present analytical tools will be input for the designers' cost prediction model to provide the designer with a database and deterministic cost methodology that allows one to trade and synthesize designs with both cost and weight as objective functions for optimization. This paper presents the team members, approach, goals, plans, and progress to date for development of COSTADE (Cost Optimization Software for Transport Aircraft Design Evaluation).

Comparing the Mass, Energy, and Cost Effects of Lightweighting in Conventional and Electric Passenger Vehicles

OpenAIRE

Hofer, Johannes; Wilhelm, Erik; Schenler, Warren

2014-01-01

In this work the effect of weight reduction using advanced lightweight materials on the mass, energy use, and cost of conventional and battery electric passenger vehicles is compared. Analytic vehicle simulation is coupled with cost assessment to find the optimal degree of weight reduction minimizing manufacturing and total costs. The results show a strong secondary weight and cost saving potential for the battery electric vehicles, but a higher sensitivity of vehicle energy use to mass reduc...

Towards a Low-Cost Real-Time Photogrammetric Landslide Monitoring System Utilising Mobile and Cloud Computing Technology

Science.gov (United States)

Chidburee, P.; Mills, J. P.; Miller, P. E.; Fieber, K. D.

2016-06-01

Close-range photogrammetric techniques offer a potentially low-cost approach in terms of implementation and operation for initial assessment and monitoring of landslide processes over small areas. In particular, the Structure-from-Motion (SfM) pipeline is now extensively used to help overcome many constraints of traditional digital photogrammetry, offering increased user-friendliness to nonexperts, as well as lower costs. However, a landslide monitoring approach based on the SfM technique also presents some potential drawbacks due to the difficulty in managing and processing a large volume of data in real-time. This research addresses the aforementioned issues by attempting to combine a mobile device with cloud computing technology to develop a photogrammetric measurement solution as part of a monitoring system for landslide hazard analysis. The research presented here focusses on (i) the development of an Android mobile application; (ii) the implementation of SfM-based open-source software in the Amazon cloud computing web service, and (iii) performance assessment through a simulated environment using data collected at a recognized landslide test site in North Yorkshire, UK. Whilst the landslide monitoring mobile application is under development, this paper describes experiments carried out to ensure effective performance of the system in the future. Investigations presented here describe the initial assessment of a cloud-implemented approach, which is developed around the well-known VisualSFM algorithm. Results are compared to point clouds obtained from alternative SfM 3D reconstruction approaches considering a commercial software solution (Agisoft PhotoScan) and a web-based system (Autodesk 123D Catch). Investigations demonstrate that the cloud-based photogrammetric measurement system is capable of providing results of centimeter-level accuracy, evidencing its potential to provide an effective approach for quantifying and analyzing landslide hazard at a local-scale.

TOWARDS A LOW-COST, REAL-TIME PHOTOGRAMMETRIC LANDSLIDE MONITORING SYSTEM UTILISING MOBILE AND CLOUD COMPUTING TECHNOLOGY

Directory of Open Access Journals (Sweden)

P. Chidburee

2016-06-01

Full Text Available Close-range photogrammetric techniques offer a potentially low-cost approach in terms of implementation and operation for initial assessment and monitoring of landslide processes over small areas. In particular, the Structure-from-Motion (SfM pipeline is now extensively used to help overcome many constraints of traditional digital photogrammetry, offering increased user-friendliness to nonexperts, as well as lower costs. However, a landslide monitoring approach based on the SfM technique also presents some potential drawbacks due to the difficulty in managing and processing a large volume of data in real-time. This research addresses the aforementioned issues by attempting to combine a mobile device with cloud computing technology to develop a photogrammetric measurement solution as part of a monitoring system for landslide hazard analysis. The research presented here focusses on (i the development of an Android mobile application; (ii the implementation of SfM-based open-source software in the Amazon cloud computing web service, and (iii performance assessment through a simulated environment using data collected at a recognized landslide test site in North Yorkshire, UK. Whilst the landslide monitoring mobile application is under development, this paper describes experiments carried out to ensure effective performance of the system in the future. Investigations presented here describe the initial assessment of a cloud-implemented approach, which is developed around the well-known VisualSFM algorithm. Results are compared to point clouds obtained from alternative SfM 3D reconstruction approaches considering a commercial software solution (Agisoft PhotoScan and a web-based system (Autodesk 123D Catch. Investigations demonstrate that the cloud-based photogrammetric measurement system is capable of providing results of centimeter-level accuracy, evidencing its potential to provide an effective approach for quantifying and analyzing landslide hazard

Cost analysis of the Hemodialysis Reliable Outflow (HeRO) Graft compared to the tunneled dialysis catheter.

Science.gov (United States)

Al Shakarchi, Julien; Inston, Nicholas; Jones, Robert G; Maclaine, Grant; Hollinworth, David

2016-04-01

In end-stage renal disease patients with central venous obstruction, who have limited vascular access options, the Hemodialysis Reliable Outflow (HeRO) Graft is a new alternative with a lower incidence of complications and longer effective device life compared to tunneled dialysis catheters (TDCs). We undertook an economic analysis of introducing the HeRO Graft in the UK. A 1-year cost-consequence decision analytic model was developed comparing management with the HeRO Graft to TDCs from the perspective of the National Health Service in England. The model comprises four 3-month cycles during which the vascular access option either remains functional for hemodialysis or fails, patients can experience access-related infection and device thrombosis, and they can also accrue associated costs. Clinical input data were sourced from published studies and unit cost data from National Health Service 2014-15 Reference Costs. In the base case, a 100-patient cohort managed with the HeRO Graft experienced 6 fewer failed devices, 53 fewer access-related infections, and 67 fewer device thromboses compared to patients managed with TDCs. Although the initial device and placement costs for the HeRO Graft are greater than those for TDCs, savings from the lower incidence of device complications and longer effective device patency reduces these costs. Overall net annual costs are £2600 for each HeRO Graft-managed patient compared to TDC-managed patients. If the National Health Service were to reimburse hemodialysis at a uniform rate regardless of the type of vascular access, net 1-year savings of £1200 per patient are estimated for individuals managed with the HeRO Graft. The base case results showed a marginal net positive cost associated with vascular access with the HeRO Graft compared with TDCs for the incremental clinical benefit of reductions in patency failures, device-related thrombosis, and access-related infection events in a patient population with limited options for

Cost-analysis of staging methods for lymph nodes in patients with prostate cancer: MRI with a lymph node-specific contrast agent compared to pelvic lymph node dissection or CT

International Nuclear Information System (INIS)

Hoevels, Anke M.; Adang, Eddy M.; Heesakkers, Roel A.M.; Jager, Gerrit J.; Barentsz, Jelle O.

2004-01-01

The aim of this study was to compare the costs of three strategies in patients with prostate cancer in a specific setting: firstly, a strategy including MR lymphography (MRL) in which pelvic lymph node dissection (PLND) is foregone in case of a negative result. The second strategy involves computed tomography (CT) followed by a biopsy or PLND. The third strategy consists of PLND without imaging beforehand. A decision analytic model was constructed. This model represented the diagnostic process for patients with prostate cancer and intermediate or high risk for nodal metastases, comparing the costs of the three strategies. Cost analysis was done from the health care perspective. The model indicated that the expected costs for the MRL strategy were □2,527. The expected costs for the strategy using CT were □3,837 and for PLND □3,994. These results show that potential savings performing MRL instead of CT were □1,310 and □1,467 for PLND. Sensitivity analyses show that variation in costs of PLND was most influential on the costs of all strategies. However, the overall savings pattern did not alter. Average costs of MRL staging in our institution are less than for CT and PLND in staging lymph nodes of patients with prostate cancer and who are intermediate or high risk for nodal metastases. (orig.)

Comparative analysis of individuals with and without chiropractic coverage: patient characteristics, utilization, and costs.

Science.gov (United States)

Legorreta, Antonio P; Metz, R Douglas; Nelson, Craig F; Ray, Saurabh; Chernicoff, Helen Oster; Dinubile, Nicholas A

2004-10-11

Back pain accounts for more than $100 billion in annual US health care costs and is the second leading cause of physician visits and hospitalizations. This study ascertains the effect of systematic access to chiropractic care on the overall and neuromusculoskeletal-specific consumption of health care resources within a large managed-care system. A 4-year retrospective claims data analysis comparing more than 700 000 health plan members with an additional chiropractic coverage benefit and 1 million members of the same health plan without the chiropractic benefit. Members with chiropractic insurance coverage, compared with those without coverage, had lower annual total health care expenditures ($1463 vs $1671 per member per year, P<.001). Having chiropractic coverage was associated with a 1.6% decrease (P = .001) in total annual health care costs at the health plan level. Back pain patients with chiropractic coverage, compared with those without coverage, had lower utilization (per 1000 episodes) of plain radiographs (17.5 vs 22.7, P<.001), low back surgery (3.3 vs 4.8, P<.001), hospitalizations (9.3 vs 15.6, P<.001), and magnetic resonance imaging (43.2 vs 68.9, P<.001). Patients with chiropractic coverage, compared with those without coverage, also had lower average back pain episode-related costs ($289 vs $399, P<.001). Access to managed chiropractic care may reduce overall health care expenditures through several effects, including (1) positive risk selection; (2) substitution of chiropractic for traditional medical care, particularly for spine conditions; (3) more conservative, less invasive treatment profiles; and (4) lower health service costs associated with managed chiropractic care. Systematic access to managed chiropractic care not only may prove to be clinically beneficial but also may reduce overall health care costs.

Comparative costs and activity from a sample of UK clinical trials units.

Science.gov (United States)

Hind, Daniel; Reeves, Barnaby C; Bathers, Sarah; Bray, Christopher; Corkhill, Andrea; Hayward, Christopher; Harper, Lynda; Napp, Vicky; Norrie, John; Speed, Chris; Tremain, Liz; Keat, Nicola; Bradburn, Mike

2017-05-02

The costs of medical research are a concern. Clinical Trials Units (CTUs) need to better understand variations in the costs of their activities. Representatives of ten CTUs and two grant-awarding bodies pooled their experiences in discussions over 1.5 years. Five of the CTUs provided estimates of, and written justification for, costs associated with CTU activities required to implement an identical protocol. The protocol described a 5.5-year, nonpharmacological randomized controlled trial (RCT) conducted at 20 centres. Direct and indirect costs, the number of full time equivalents (FTEs) and the FTEs attracting overheads were compared and qualitative methods (unstructured interviews and thematic analysis) were used to interpret the results. Four members of the group (funding-body representatives or award panel members) reviewed the justification statements for transparency and information content. Separately, 163 activities common to trials were assigned to roles used by nine CTUs; the consistency of role delineation was assessed by Cohen's κ. Median full economic cost of CTU activities was £769,637 (range: £661,112 to £1,383,323). Indirect costs varied considerably, accounting for between 15% and 59% (median 35%) of the full economic cost of the grant. Excluding one CTU, which used external statisticians, the total number of FTEs ranged from 2.0 to 3.0; total FTEs attracting overheads ranged from 0.3 to 2.0. Variation in directly incurred staff costs depended on whether CTUs: supported particular roles from core funding rather than grants; opted not to cost certain activities into the grant; assigned clerical or data management tasks to research or administrative staff; employed extensive on-site monitoring strategies (also the main source of variation in non-staff costs). Funders preferred written justifications of costs that described both FTEs and indicative tasks for funded roles, with itemised non-staff costs. Consistency in role delineation was fair (κ�

Implementing and developing cloud computing applications

CERN Document Server

Sarna, David E Y

2010-01-01

From small start-ups to major corporations, companies of all sizes have embraced cloud computing for the scalability, reliability, and cost benefits it can provide. It has even been said that cloud computing may have a greater effect on our lives than the PC and dot-com revolutions combined.Filled with comparative charts and decision trees, Implementing and Developing Cloud Computing Applications explains exactly what it takes to build robust and highly scalable cloud computing applications in any organization. Covering the major commercial offerings available, it provides authoritative guidan

Low cost, scalable proteomics data analysis using Amazon's cloud computing services and open source search algorithms.

Science.gov (United States)

Halligan, Brian D; Geiger, Joey F; Vallejos, Andrew K; Greene, Andrew S; Twigger, Simon N

2009-06-01

One of the major difficulties for many laboratories setting up proteomics programs has been obtaining and maintaining the computational infrastructure required for the analysis of the large flow of proteomics data. We describe a system that combines distributed cloud computing and open source software to allow laboratories to set up scalable virtual proteomics analysis clusters without the investment in computational hardware or software licensing fees. Additionally, the pricing structure of distributed computing providers, such as Amazon Web Services, allows laboratories or even individuals to have large-scale computational resources at their disposal at a very low cost per run. We provide detailed step-by-step instructions on how to implement the virtual proteomics analysis clusters as well as a list of current available preconfigured Amazon machine images containing the OMSSA and X!Tandem search algorithms and sequence databases on the Medical College of Wisconsin Proteomics Center Web site ( http://proteomics.mcw.edu/vipdac ).

Effect of water treatment on the comparative costs of evaporative and dry cooled power plants

International Nuclear Information System (INIS)

Gold, H.; Goldstein, D.J.; Yung, D.

1976-07-01

The report presents the results of a study on the relative cost of energy from a nominal 1000 Mwe nuclear steam electric generating plant using either dry or evaporative cooling at four sites in the United States: Rochester, New York; Sheridan, Wyoming; Gallup, New Mexico and Dallas, Texas. Previous studies have shown that because of lower efficiencies the total annual evaluated costs for dry cooling systems exceeds the total annual evaluated costs of evaporative cooling systems, not including the cost of water. The cost of water comprises the cost of supplying the makeup water, the cost of treatment of the makeup and/or the circulating water in the tower, and the cost of treatment and disposal of the blowdown in an environmentally acceptable manner. The purpose of the study is to show the effect of water costs on the comparative costs of dry and evaporative cooled towers

Cost/benefit analysis comparing ex situ treatment technologies for removing carbon tetrachloride from Hanford groundwater

International Nuclear Information System (INIS)

Truex, M.J.; Brown, D.R.; Elliott, D.B.

1993-05-01

Pacific Northwest Laboratory conducted a cost/benefit and performance analysis to compare ex situ technologies that can be used to destroy the carbon tetrachloride (CCl 4 ) in the ground water of Hanford's 200 West Area. The objective of this work was to provide a direct quantitative and qualitative comparison of competing technologies. The technologies examined included a biological system, the Thermochemical Environmental Energy System II (TEES II), and a UV/oxidation system. The factors examined included key system operation parameters, impact on inorganic contaminants in the ground water, and secondary waste production. The cost effectiveness of these destruction technologies was also compared to the cost for an air stripping/granular activated carbon (AS/GAC) system. While the AS/GAC system appeared to be more cost effective at many levels than the CCl 4 destruction technologies, the secondary waste produced by this system may lead to significant cost and/or regulatory problems. The factors with the greatest influence on cost for each destruction technology are as follows: nutrient requirements for both of the biological systems, electricity requirements and the type of unit operations for the TEES II process, and electricity requirements for UV/oxidation

Cost-Effectiveness Analysis of Stereotactic Body Radiation Therapy Compared With Radiofrequency Ablation for Inoperable Colorectal Liver Metastases

Energy Technology Data Exchange (ETDEWEB)

Kim, Hayeon, E-mail: kimh2@upmc.edu [Department of Radiation Oncology, University of Pittsburgh Cancer Institute, Pittsburgh, Pennsylvania (United States); Gill, Beant; Beriwal, Sushil; Huq, M. Saiful [Department of Radiation Oncology, University of Pittsburgh Cancer Institute, Pittsburgh, Pennsylvania (United States); Roberts, Mark S. [Department of Health Policy and Management, University of Pittsburgh School of Public Health, Pittsburgh, Pennsylvania (United States); Smith, Kenneth J. [Department of Medicine, University of Pittsburgh School of Medicine, Pittsburgh, Pennsylvania (United States)

2016-07-15

Purpose: To conduct a cost-effectiveness analysis to determine whether stereotactic body radiation therapy (SBRT) is a cost-effective therapy compared with radiofrequency ablation (RFA) for patients with unresectable colorectal cancer (CRC) liver metastases. Methods and Materials: A cost-effectiveness analysis was conducted using a Markov model and 1-month cycle over a lifetime horizon. Transition probabilities, quality of life utilities, and costs associated with SBRT and RFA were captured in the model on the basis of a comprehensive literature review and Medicare reimbursements in 2014. Strategies were compared using the incremental cost-effectiveness ratio, with effectiveness measured in quality-adjusted life years (QALYs). To account for model uncertainty, 1-way and probabilistic sensitivity analyses were performed. Strategies were evaluated with a willingness-to-pay threshold of $100,000 per QALY gained. Results: In base case analysis, treatment costs for 3 fractions of SBRT and 1 RFA procedure were $13,000 and $4397, respectively. Median survival was assumed the same for both strategies (25 months). The SBRT costs $8202 more than RFA while gaining 0.05 QALYs, resulting in an incremental cost-effectiveness ratio of $164,660 per QALY gained. In 1-way sensitivity analyses, results were most sensitive to variation of median survival from both treatments. Stereotactic body radiation therapy was economically reasonable if better survival was presumed (>1 month gain) or if used for large tumors (>4 cm). Conclusions: If equal survival is assumed, SBRT is not cost-effective compared with RFA for inoperable colorectal liver metastases. However, if better local control leads to small survival gains with SBRT, this strategy becomes cost-effective. Ideally, these results should be confirmed with prospective comparative data.

Cost-Effectiveness Analysis of Stereotactic Body Radiation Therapy Compared With Radiofrequency Ablation for Inoperable Colorectal Liver Metastases

International Nuclear Information System (INIS)

Kim, Hayeon; Gill, Beant; Beriwal, Sushil; Huq, M. Saiful; Roberts, Mark S.; Smith, Kenneth J.

2016-01-01

Purpose: To conduct a cost-effectiveness analysis to determine whether stereotactic body radiation therapy (SBRT) is a cost-effective therapy compared with radiofrequency ablation (RFA) for patients with unresectable colorectal cancer (CRC) liver metastases. Methods and Materials: A cost-effectiveness analysis was conducted using a Markov model and 1-month cycle over a lifetime horizon. Transition probabilities, quality of life utilities, and costs associated with SBRT and RFA were captured in the model on the basis of a comprehensive literature review and Medicare reimbursements in 2014. Strategies were compared using the incremental cost-effectiveness ratio, with effectiveness measured in quality-adjusted life years (QALYs). To account for model uncertainty, 1-way and probabilistic sensitivity analyses were performed. Strategies were evaluated with a willingness-to-pay threshold of $100,000 per QALY gained. Results: In base case analysis, treatment costs for 3 fractions of SBRT and 1 RFA procedure were $13,000 and $4397, respectively. Median survival was assumed the same for both strategies (25 months). The SBRT costs $8202 more than RFA while gaining 0.05 QALYs, resulting in an incremental cost-effectiveness ratio of $164,660 per QALY gained. In 1-way sensitivity analyses, results were most sensitive to variation of median survival from both treatments. Stereotactic body radiation therapy was economically reasonable if better survival was presumed (>1 month gain) or if used for large tumors (>4 cm). Conclusions: If equal survival is assumed, SBRT is not cost-effective compared with RFA for inoperable colorectal liver metastases. However, if better local control leads to small survival gains with SBRT, this strategy becomes cost-effective. Ideally, these results should be confirmed with prospective comparative data.

Outline of cost-benefit analysis and a case study

Science.gov (United States)

Kellizy, A.

1978-01-01

The methodology of cost-benefit analysis is reviewed and a case study involving solar cell technology is presented. Emphasis is placed on simplifying the technique in order to permit a technical person not trained in economics to undertake a cost-benefit study comparing alternative approaches to a given problem. The role of economic analysis in management decision making is discussed. In simplifying the methodology it was necessary to restrict the scope and applicability of this report. Additional considerations and constraints are outlined. Examples are worked out to demonstrate the principles. A computer program which performs the computational aspects appears in the appendix.

DIDEM - An integrated model for comparative health damage costs calculation of air pollution

Science.gov (United States)

Ravina, Marco; Panepinto, Deborah; Zanetti, Maria Chiara

2018-01-01

Air pollution represents a continuous hazard to human health. Administration, companies and population need efficient indicators of the possible effects given by a change in decision, strategy or habit. The monetary quantification of health effects of air pollution through the definition of external costs is increasingly recognized as a useful indicator to support decision and information at all levels. The development of modelling tools for the calculation of external costs can provide support to analysts in the development of consistent and comparable assessments. In this paper, the DIATI Dispersion and Externalities Model (DIDEM) is presented. The DIDEM model calculates the delta-external costs of air pollution comparing two alternative emission scenarios. This tool integrates CALPUFF's advanced dispersion modelling with the latest WHO recommendations on concentration-response functions. The model is based on the impact pathway method. It was designed to work with a fine spatial resolution and a local or national geographic scope. The modular structure allows users to input their own data sets. The DIDEM model was tested on a real case study, represented by a comparative analysis of the district heating system in Turin, Italy. Additional advantages and drawbacks of the tool are discussed in the paper. A comparison with other existing models worldwide is reported.

Computer tomography: a cost-saving examination?

International Nuclear Information System (INIS)

Barneveld Binkhuysen, F.H.; Puijlaert, C.B.A.J.

1987-01-01

The research concerns the influence of the body computer tomograph (BCT) on the efficiency in radiology and in the hospital as a whole in The Netherlands. Hospitals with CT are compared with hospitals without CT. In radiology the substitution effect is investigated, with use of the number of radiological performances per clinical patient as a parameter. This parameter proves to decrease in hospitals with a CT, in contrast to hospitals without a CT. The often-expressed opinion that the CT should specifically perform complementary examinations appears incorrect. As to the efficiency in the hospital this is related to the average hospital in-patient stay. The average hospital in-patient stay proves to be shorter in hospitals with a CT than in those without a CT. The CT has turned out to be a very effective expedient which unfortunately, however, is being used inefficiently in The Netherlands, owing to limited installation. 17 refs.; 6 figs.; 5 tabs

Expedited Holonomic Quantum Computation via Net Zero-Energy-Cost Control in Decoherence-Free Subspace.

Science.gov (United States)

Pyshkin, P V; Luo, Da-Wei; Jing, Jun; You, J Q; Wu, Lian-Ao

2016-11-25

Holonomic quantum computation (HQC) may not show its full potential in quantum speedup due to the prerequisite of a long coherent runtime imposed by the adiabatic condition. Here we show that the conventional HQC can be dramatically accelerated by using external control fields, of which the effectiveness is exclusively determined by the integral of the control fields in the time domain. This control scheme can be realized with net zero energy cost and it is fault-tolerant against fluctuation and noise, significantly relaxing the experimental constraints. We demonstrate how to realize the scheme via decoherence-free subspaces. In this way we unify quantum robustness merits of this fault-tolerant control scheme, the conventional HQC and decoherence-free subspace, and propose an expedited holonomic quantum computation protocol.

Magnetic-fusion energy and computers

International Nuclear Information System (INIS)

Killeen, J.

1982-01-01

The application of computers to magnetic fusion energy research is essential. In the last several years the use of computers in the numerical modeling of fusion systems has increased substantially. There are several categories of computer models used to study the physics of magnetically confined plasmas. A comparable number of types of models for engineering studies are also in use. To meet the needs of the fusion program, the National Magnetic Fusion Energy Computer Center has been established at the Lawrence Livermore National Laboratory. A large central computing facility is linked to smaller computer centers at each of the major MFE laboratories by a communication network. In addition to providing cost effective computing services, the NMFECC environment stimulates collaboration and the sharing of computer codes among the various fusion research groups

Magnetic fusion energy and computers

International Nuclear Information System (INIS)

Killeen, J.

1982-01-01

The application of computers to magnetic fusion energy research is essential. In the last several years the use of computers in the numerical modeling of fusion systems has increased substantially. There are several categories of computer models used to study the physics of magnetically confined plasmas. A comparable number of types of models for engineering studies are also in use. To meet the needs of the fusion program, the National Magnetic Fusion Energy Computer Center has been established at the Lawrence Livermore National Laboratory. A large central computing facility is linked to smaller computer centers at each of the major MFE laboratories by a communication network. In addition to providing cost effective computing services, the NMFECC environment stimulates collaboration and the sharing of computer codes among the various fusion research groups

Cost-effectiveness of alternative management strategies for patients with solitary pulmonary nodules.

Science.gov (United States)

Gould, Michael K; Sanders, Gillian D; Barnett, Paul G; Rydzak, Chara E; Maclean, Courtney C; McClellan, Mark B; Owens, Douglas K

2003-05-06

Positron emission tomography (PET) with 18-fluorodeoxyglucose (FDG) is a potentially useful but expensive test to diagnose solitary pulmonary nodules. To evaluate the cost-effectiveness of strategies for pulmonary nodule diagnosis and to specifically compare strategies that did and did not include FDG-PET. Decision model. Accuracy and complications of diagnostic tests were estimated by using meta-analysis and literature review. Modeled survival was based on data from a large tumor registry. Cost estimates were derived from Medicare reimbursement and other sources. All adult patients with a new, noncalcified pulmonary nodule seen on chest radiograph. Patient lifetime. Societal. 40 clinically plausible combinations of 5 diagnostic interventions, including computed tomography, FDG-PET, transthoracic needle biopsy, surgery, and watchful waiting. Costs, quality-adjusted life-years (QALYs), and incremental cost-effectiveness ratios. The cost-effectiveness of strategies depended critically on the pretest probability of malignancy. For patients with low pretest probability (26%), strategies that used FDG-PET selectively when computed tomography results were possibly malignant cost as little as 20 000 dollars per QALY gained. For patients with high pretest probability (79%), strategies that used FDG-PET selectively when computed tomography results were benign cost as little as 16 000 dollars per QALY gained. For patients with intermediate pretest probability (55%), FDG-PET strategies cost more than 220 000 dollars per QALY gained because they were more costly but only marginally more effective than computed tomography-based strategies. The choice of strategy also depended on the risk for surgical complications, the probability of nondiagnostic needle biopsy, the sensitivity of computed tomography, and patient preferences for time spent in watchful waiting. In probabilistic sensitivity analysis, FDG-PET strategies were cost saving or cost less than 100 000 dollars per QALY

Cost-effectiveness of kidney transplantation compared with chronic dialysis in end-stage renal disease

Directory of Open Access Journals (Sweden)

Diego Rosselli

2015-01-01

Full Text Available To estimate the costs and effectiveness measured in quality-adjusted life years (QALY of kidney transplantation compared with dialysis in adults suffering from end-stage renal disease from the perspective of the Colombian healthcare system, we designed a Markov model with monthly cycles over a five-year time horizon and eight transitional states, including death as an absorbing state. Transition probabilities were obtained from international registries, costs from different local sources [case studies, official tariffs (ISS 2001 + 35% for procedures and SISMED for medications]. Data were validated by an expert panel and we performed univariate, multivariate and probabilistic sensitivity analyses. Effectiveness indicators were months of life gained, months of dialysis averted and deaths prevented. The annual discount rate was 3% and the cost-utility threshold (willingness to pay was three times gross domestic product (GDP = USD 20,000 per QALY. The costs were adopted in US dollars (USD using the 2012 average exchange rate (1 USD = COP$ 1798. The discounted average total cost for five years was USD 76,718 for transplantation and USD 76,891 for dialysis, with utilities 2.98 and 2.10 QALY, respectively. Additionally, renal transplantation represented 6.9 months gained, 35 months in dialysis averted per patient and one death averted for each of the five patients transplanted in five years. We conclude that renal transplantation improves the overall survival rates and quality of life and is a cost-saving alternative compared with dialysis.

[Self-owned versus accredited network: comparative cost analysis in a Brazilian health insurance provider].

Science.gov (United States)

Souza, Marcos Antônio de; Salvalaio, Dalva

2010-10-01

to analyze the cost of a self-owned network maintained by a Brazilian health insurance provider as compared to the price charged by accredited service providers, so as to identify whether or not the self-owned network is economically advantageous. for this exploratory study, the company's management reports were reviewed. The cost associated with the self-owned network was calculated based on medical and dental office visits and diagnostic/laboratory tests performed at one of the company's most representative facilities. The costs associated with third parties were derived from price tables used by the accredited network for the same services analyzed in the self-owned network. The full-cost method was used for cost quantification. Costs are presented as absolute values (in R$) and percent comparisons between self-owned network costs versus accredited network costs. overall, the self-owned network was advantageous for medical and dental consultations as well as diagnostic and laboratory tests. Pediatric and labor medicine consultations and x-rays were less costly in the accredited network. the choice of verticalization has economic advantages for the health care insurance operator in comparison with services provided by third parties.

Cost minimization of generation, storage, and new loads, comparing costs with and without externalities

DEFF Research Database (Denmark)

Noel, Lance Douglas; Brodie, Joseph; Kempton, Willett

2017-01-01

G) technology, and building heat) are modeled within the PJM Interconnection. The corresponding electric systems are then operated and constrained to meet the load every hour over four years. The total cost of each energy system is calculated, both with and without externalities, to find the least...... cost energy systems. Using today’s costs of conventional and renewable electricity and without adding any externalities, the cost-minimum system includes no renewable generation, but does include EVs. When externalities are included, however, the most cost-effective to system covers 50% of the electric...... load with renewable energy and runs reliably without need for either new conventional generation or purpose-built storage. The three novel energy policy implications of this research are: (1) using today’s cost of renewable electricity and estimates of externalities, it is cost effective to implement...

Cane Toad or Computer Mouse? Real and Computer-Simulated Laboratory Exercises in Physiology Classes

Science.gov (United States)

West, Jan; Veenstra, Anneke

2012-01-01

Traditional practical classes in many countries are being rationalised to reduce costs. The challenge for university educators is to provide students with the opportunity to reinforce theoretical concepts by running something other than a traditional practical program. One alternative is to replace wet labs with comparable computer simulations.…

Cost-effectiveness of cardiotocography plus ST analysis of the fetal electrocardiogram compared with cardiotocography only

NARCIS (Netherlands)

Vijgen, Sylvia M. C.; Westerhuis, Michelle E. M. H.; Opmeer, Brent C.; Visser, Gerard H. A.; Moons, Karl G. M.; Porath, Martina M.; Oei, Guid S.; van Geijn, Herman P.; Bolte, Antoinette C.; Willekes, Christine; Nijhuis, Jan G.; van Beek, Erik; Graziosi, Giuseppe C. M.; Schuitemaker, Nico W. E.; van Lith, Jan M. M.; van den Akker, Eline S. A.; Drogtrop, Addy P.; van Dessel, Hendrikus J. H. M.; Rijnders, Robbert J. P.; Oosterbaan, Herman P.; Mol, Ben Willem J.; Kwee, Anneke

2011-01-01

To assess the cost-effectiveness of addition of ST analysis of the fetal electrocardiogram (ECG; STAN) to cardiotocography (CTG) for fetal surveillance during labor compared with CTG only. Cost-effectiveness analysis based on a randomized clinical trial on ST analysis of the fetal ECG. Obstetric

Cost-effectiveness analysis of left atrial appendage occlusion compared with pharmacological strategies for stroke prevention in atrial fibrillation.

Science.gov (United States)

Lee, Vivian Wing-Yan; Tsai, Ronald Bing-Ching; Chow, Ines Hang-Iao; Yan, Bryan Ping-Yen; Kaya, Mehmet Gungor; Park, Jai-Wun; Lam, Yat-Yin

2016-08-31

Transcatheter left atrial appendage occlusion (LAAO) is a promising therapy for stroke prophylaxis in non-valvular atrial fibrillation (NVAF) but its cost-effectiveness remains understudied. This study evaluated the cost-effectiveness of LAAO for stroke prophylaxis in NVAF. A Markov decision analytic model was used to compare the cost-effectiveness of LAAO with 7 pharmacological strategies: aspirin alone, clopidogrel plus aspirin, warfarin, dabigatran 110 mg, dabigatran 150 mg, apixaban, and rivaroxaban. Outcome measures included quality-adjusted life years (QALYs), lifetime costs and incremental cost-effectiveness ratios (ICERs). Base-case data were derived from ACTIVE, RE-LY, ARISTOTLE, ROCKET-AF, PROTECT-AF and PREVAIL trials. One-way sensitivity analysis varied by CHADS2 score, HAS-BLED score, time horizons, and LAAO costs; and probabilistic sensitivity analysis using 10,000 Monte Carlo simulations was conducted to assess parameter uncertainty. LAAO was considered cost-effective compared with aspirin, clopidogrel plus aspirin, and warfarin, with ICER of US$5,115, $2,447, and $6,298 per QALY gained, respectively. LAAO was dominant (i.e. less costly but more effective) compared to other strategies. Sensitivity analysis demonstrated favorable ICERs of LAAO against other strategies in varied CHADS2 score, HAS-BLED score, time horizons (5 to 15 years) and LAAO costs. LAAO was cost-effective in 86.24 % of 10,000 simulations using a threshold of US$50,000/QALY. Transcatheter LAAO is cost-effective for prevention of stroke in NVAF compared with 7 pharmacological strategies. The transcatheter left atrial appendage occlusion (LAAO) is considered cost-effective against the standard 7 oral pharmacological strategies including acetylsalicylic acid (ASA) alone, clopidogrel plus ASA, warfarin, dabigatran 110 mg, dabigatran 150 mg, apixaban, and rivaroxaban for stroke prophylaxis in non-valvular atrial fibrillation management.

Development of the oil spill response cost-effectiveness analytical tool

International Nuclear Information System (INIS)

Etkin, D.S.; Welch, J.

2005-01-01

Decision-making during oil spill response operations or contingency planning requires balancing the need to remove as much oil as possible from the environment with the desire to minimize the impact of response operations on the environment they are intended to protect. This paper discussed the creation of a computer tool developed to help in planning and decision-making during response operations. The Oil Spill Response Cost-Effectiveness Analytical Tool (OSRCEAT) was developed to compare the costs of response with the benefits of response in both hypothetical and actual oil spills. The computer-based analytical tool can assist responders and contingency planners in decision-making processes as well as act as a basis of discussion in the evaluation of response options. Using inputs on spill parameters, location and response options, OSRCEAT can calculate response cost, costs of environmental and socioeconomic impacts of the oil spill and response impacts. Oil damages without any response are contrasted to oil damages with response, with expected improvements. Response damages are subtracted from the difference in damages with and without response in order to derive a more accurate response benefit. An OSRCEAT user can test various response options to compare potential benefits in order to maximize response benefit. OSRCEAT is best used to compare and contrast the relative benefits and costs of various response options. 50 refs., 19 tabs., 2 figs

Hospital Costs of Foreign Non-Resident Patients: A Comparative Analysis in Catalonia, Spain.

Science.gov (United States)

Arroyo-Borrell, Elena; Renart-Vicens, Gemma; Saez, Marc; Carreras, Marc

2017-09-14

Although patient mobility has increased over the world, in Europe there is a lack of empirical studies. The aim of the study was to compare foreign non-resident patients versus domestic patients for the particular Catalan case, focusing on patient characteristics, hospitalisation costs and differences in costs depending on the typology of the hospital they are treated. We used data from the 2012 Minimum Basic Data Set-Acute Care hospitals (CMBD-HA) in Catalonia. We matched two case-control groups: first, foreign non-resident patients versus domestic patients and, second, foreign non-resident patients treated by Regional Public Hospitals versus other type of hospitals. Hospitalisation costs were modelled using a GLM Gamma with a log-link. Our results show that foreign non-resident patients were significantly less costly than domestic patients (12% cheaper). Our findings also suggested differences in the characteristics of foreign non-resident patients using Regional Public Hospitals or other kinds of hospitals although we did not observe significant differences in the healthcare costs. Nevertheless, women, 15-24 and 35-44 years old patients and the days of stay were less costly in Regional Public Hospitals. In general, acute hospitalizations of foreign non-resident patients while they are on holiday cost substantially less than domestic patients. The typology of hospital is not found to be a relevant factor influencing costs.

Exploring the Use of Cost-Benefit Analysis to Compare Pharmaceutical Treatments for Menorrhagia.

Science.gov (United States)

Sanghera, Sabina; Frew, Emma; Gupta, Janesh Kumar; Kai, Joe; Roberts, Tracy Elizabeth

2015-09-01

The extra-welfarist theoretical framework tends to focus on health-related quality of life, whilst the welfarist framework captures a wider notion of well-being. EQ-5D and SF-6D are commonly used to value outcomes in chronic conditions with episodic symptoms, such as heavy menstrual bleeding (clinically termed menorrhagia). Because of their narrow-health focus and the condition's periodic nature these measures may be unsuitable. A viable alternative measure is willingness to pay (WTP) from the welfarist framework. We explore the use of WTP in a preliminary cost-benefit analysis comparing pharmaceutical treatments for menorrhagia. A cost-benefit analysis was carried out based on an outcome of WTP. The analysis is based in the UK primary care setting over a 24-month time period, with a partial societal perspective. Ninety-nine women completed a WTP exercise from the ex-ante (pre-treatment/condition) perspective. Maximum average WTP values were elicited for two pharmaceutical treatments, levonorgestrel-releasing intrauterine system (LNG-IUS) and oral treatment. Cost data were offset against WTP and the net present value derived for treatment. Qualitative information explaining the WTP values was also collected. Oral treatment was indicated to be the most cost-beneficial intervention costing £107 less than LNG-IUS and generating £7 more benefits. The mean incremental net present value for oral treatment compared with LNG-IUS was £113. The use of the WTP approach was acceptable as very few protests and non-responses were observed. The preliminary cost-benefit analysis results recommend oral treatment as the first-line treatment for menorrhagia. The WTP approach is a feasible alternative to the conventional EQ-5D/SF-6D approaches and offers advantages by capturing benefits beyond health, which is particularly relevant in menorrhagia.

Cost-effectiveness of endobronchial valve treatment in patients with severe emphysema compared to standard medical care.

Science.gov (United States)

Hartman, Jorine E; Klooster, Karin; Groen, Henk; Ten Hacken, Nick H T; Slebos, Dirk-Jan

2018-03-25

Bronchoscopic lung volume reduction using endobronchial valves (EBV) is an effective new treatment option for severe emphysema patients without interlobar collateral ventilation. The objective of this study was to perform an economic evaluation including the costs and cost-effectiveness of EBV treatment compared with standard medical care (SoC) from the hospital perspective in the short term and long term. For the short-term evaluation, incremental cost-effectiveness ratios (ICER) were calculated based on the 6-month end point data from the STELVIO randomized trial. For the long-term evaluation, a Markov simulation model was constructed based on STELVIO and literature. The clinical outcome data were quality-adjusted life-years (QALY) based on the EuroQol5-Dimensions (EQ5D) questionnaire, the 6-min walking distance (6MWD) and the St George's Respiratory Questionnaire (SGRQ). The mean difference between the EBV group and controls was €16 721/patient. In the short-term (6 months), costs per additional QALY was €205 129, the ICER for 6MWD was €160 and for SGRQ was €1241. In the long term, the resulting cost-effectiveness ratios indicate additional costs of €39 000 per QALY gained with a 5-year time horizon and €21 500 per QALY gained at 10 years. In comparison, historical costs per additional QALY 1 year after the coil treatment are €738 400, 5 years after lung volume reduction surgery are €48 415 and 15 years after double-lung transplantation are €29 410. The positive clinical effects of EBV treatment are associated with increased costs compared with SoC. Our results suggest that the EBV treatment has a favourable cost-effectiveness profile, also when compared with other treatment modalities for this patient group. © 2018 Asian Pacific Society of Respirology.

Estimation of the laser cutting operating cost by support vector regression methodology

Science.gov (United States)

Jović, Srđan; Radović, Aleksandar; Šarkoćević, Živče; Petković, Dalibor; Alizamir, Meysam

2016-09-01

Laser cutting is a popular manufacturing process utilized to cut various types of materials economically. The operating cost is affected by laser power, cutting speed, assist gas pressure, nozzle diameter and focus point position as well as the workpiece material. In this article, the process factors investigated were: laser power, cutting speed, air pressure and focal point position. The aim of this work is to relate the operating cost to the process parameters mentioned above. CO2 laser cutting of stainless steel of medical grade AISI316L has been investigated. The main goal was to analyze the operating cost through the laser power, cutting speed, air pressure, focal point position and material thickness. Since the laser operating cost is a complex, non-linear task, soft computing optimization algorithms can be used. Intelligent soft computing scheme support vector regression (SVR) was implemented. The performance of the proposed estimator was confirmed with the simulation results. The SVR results are then compared with artificial neural network and genetic programing. According to the results, a greater improvement in estimation accuracy can be achieved through the SVR compared to other soft computing methodologies. The new optimization methods benefit from the soft computing capabilities of global optimization and multiobjective optimization rather than choosing a starting point by trial and error and combining multiple criteria into a single criterion.

Comparative costs of electricity generation: a Canadian perspective

International Nuclear Information System (INIS)

Moore, B.; Guindon, S.

1998-01-01

The cost of generation will be a critical factor in the decision making process for electric power utilities in the years ahead as plans for new capacity are made under the pressures of a more competitive, deregulated market. Technologies with low capital, fuel and operating costs, short construction schedules, capacity closely matched to load growth and minimal regulatory/public acceptance problems are generally more attractive. As the Levelized Unit Energy Cost (LUEC) studies show, natural gas plants require ready access to low-cost supply of natural gas in order to compete. In areas with access to large supplies of low cost natural gas, it is therefore quite likely that natural gas turbines will be chosen, perhaps in combined cycles, for the next round of capacity increases in order to minimize financial risks. From a cost perspective, the challenge for the nuclear industry in Canada is to ensure, in the short to medium term, that the existing plants reach their full operating life and that they operate consistently at high capacity factors. In the longer term, improvements which lower the capital costs of nuclear plants, decrease construction times and increase capacity utilization factors will enhance the competitiveness of the nuclear option

A systematic review of cost-effectiveness studies comparing conventional, biological and surgical interventions for inflammatory bowel disease.

Science.gov (United States)

Pillai, Nadia; Dusheiko, Mark; Burnand, Bernard; Pittet, Valérie

2017-01-01

Inflammatory bowel disease (IBD) is a chronic disease placing a large health and economic burden on health systems worldwide. The treatment landscape is complex with multiple strategies to induce and maintain remission while avoiding long-term complications. The extent to which rising treatment costs, due to expensive biologic agents, are offset by improved outcomes and fewer hospitalisations and surgeries needs to be evaluated. This systematic review aimed to assess the cost-effectiveness of treatment strategies for IBD. A systematic literature search was performed in March 2017 to identify economic evaluations of pharmacological and surgical interventions, for adults diagnosed with Crohn's disease (CD) or ulcerative colitis (UC). Costs and incremental cost-effectiveness ratios (ICERs) were adjusted to reflect 2015 purchasing power parity (PPP). Risk of bias assessments and a narrative synthesis of individual study findings are presented. Forty-nine articles were included; 24 on CD and 25 on UC. Infliximab and adalimumab induction and maintenance treatments were cost-effective compared to standard care in patients with moderate or severe CD; however, in patients with conventional-drug refractory CD, fistulising CD and for maintenance of surgically-induced remission ICERs were above acceptable cost-effectiveness thresholds. In mild UC, induction of remission using high dose mesalazine was dominant compared to standard dose. In UC refractory to conventional treatments, infliximab and adalimumab induction and maintenance treatment were not cost-effective compared to standard care; however, ICERs for treatment with vedolizumab and surgery were favourable. We found that, in general, while biologic agents helped improve outcomes, they incurred high costs and therefore were not cost-effective, particularly for use as maintenance therapy. The cost-effectiveness of biologic agents may improve as market prices fall and with the introduction of biosimilars. Future research

Cost Analysis of the STONE Randomized Trial: Can Health Care Costs be Reduced One Test at a Time?

Science.gov (United States)

Melnikow, Joy; Xing, Guibo; Cox, Ginger; Leigh, Paul; Mills, Lisa; Miglioretti, Diana L; Moghadassi, Michelle; Smith-Bindman, Rebecca

2016-04-01

Decreasing the use of high-cost tests may reduce health care costs. To compare costs of care for patients presenting to the emergency department (ED) with suspected kidney stones randomized to 1 of 3 initial imaging tests. Patients were randomized to point-of-care ultrasound (POC US, least costly), radiology ultrasound (RAD US), or computed tomography (CT, most costly). Subsequent testing and treatment were the choice of the treating physician. A total of 2759 patients at 15 EDs were randomized to POC US (n=908), RAD US, (n=893), or CT (n=958). Mean age was 40.4 years; 51.8% were male. All medical care documented in the trial database in the 7 days following enrollment was abstracted and coded to estimate costs using national average 2012 Medicare reimbursements. Costs for initial ED care and total 7-day costs were compared using nonparametric bootstrap to account for clustering of patients within medical centers. Initial ED visit costs were modestly lower for patients assigned to RAD US: $423 ($411, $434) compared with patients assigned to CT: $448 ($438, $459) (Pcosts were not significantly different between groups: $1014 ($912, $1129) for POC US, $970 ($878, $1078) for RAD US, and $959 ($870, $1044) for CT. Hospital admissions contributed over 50% of total costs, though only 11% of patients were admitted. Mean total costs (and admission rates) varied substantially by site from $749 to $1239. Assignment to a less costly test had no impact on overall health care costs for ED patients. System-level interventions addressing variation in admission rates from the ED might have greater impact on costs.

The cost of dental implants as compared to that of conventional strategies

NARCIS (Netherlands)

van der Wijk, P; Bouma, J; van Waas, MAJ; van Oort, RP; Rutten, FFH

1998-01-01

The effectiveness of dental implants is widely studied, especially in terms of their clinical outcomes. However, from the policymaker's point of view, variables other than safety and efficacy such as the costs and effectiveness of dental implants as compared to other treatment alternatives, are

A comparative study: use of a Brain-computer Interface (BCI) device by people with cerebral palsy in interaction with computers.

Science.gov (United States)

Heidrich, Regina O; Jensen, Emely; Rebelo, Francisco; Oliveira, Tiago

2015-01-01

This article presents a comparative study among people with cerebral palsy and healthy controls, of various ages, using a Brain-computer Interface (BCI) device. The research is qualitative in its approach. Researchers worked with Observational Case Studies. People with cerebral palsy and healthy controls were evaluated in Portugal and in Brazil. The study aimed to develop a study for product evaluation in order to perceive whether people with cerebral palsy could interact with the computer and compare whether their performance is similar to that of healthy controls when using the Brain-computer Interface. Ultimately, it was found that there are no significant differences between people with cerebral palsy in the two countries, as well as between populations without cerebral palsy (healthy controls).

A comparative study on the cost of new antibiotics and drugs of other therapeutic categories.

Science.gov (United States)

Falagas, Matthew E; Fragoulis, Konstantinos N; Karydis, Ioannis

2006-12-20

Drug treatment is becoming more expensive due to the increased cost for the introduction of new drugs, and there seems to be an uneven distribution of medication cost for different therapeutic categories. We hypothesized that the cost of new antimicrobial agents may differ from that of other therapeutic categories and this may play a role in the stagnation of development of new antibiotics. We performed a pharmaco-economical comparative analysis of the drug cost of treatment for new agents introduced in the United States drug market in various therapeutic categories. We calculated the drug cost (in US dollars) of a ten-day treatment of all new drugs approved by the FDA during the period between January 1997 and July 2003, according to the 2004 Red Book Pharmacy's Fundamental Reference. New anti-neoplastic agents were found to be the most expensive drugs in comparison to all other therapeutic categories, with a median ten-day drug-treatment cost of US$848 compared to the median ten-day drug-treatment costs of all other categories ranging from US$29 to US$301. On the other hand, new antimicrobial drugs were found to be much less expensive, with a median ten-day drug-treatment cost of US$137 and $US85 for all anti-microbial agents and for anti-microbial agents excluding anti-HIV medications, respectively. The drug-treatment cost of new medications varies considerably by different therapeutic categories. This fact may influence industry decisions regarding the development of new drugs and may play a role in the shortage of new antimicrobial agents in the fight against the serious problem of antimicrobial resistance.

Payer decision-making with limited comparative and cost effectiveness data: the case of new pharmacological treatments for gout.

Science.gov (United States)

Meltzer, Michele; Pizzi, Laura T; Jutkowitz, Eric

2012-08-01

The need for comparative effectiveness (CE) data continues to grow, fuelled by market demand as well as health reform. There may be an assumption that new drugs result in improved efficacy compared with the standard of care, therefore warranting premium prices. Gout treatment has recently become controversial, as expensive new drugs enter the market with limited CE data. The authors reviewed published clinical trials and conducted a cost effectiveness analysis on a new drug (febuxostat) versus the standard (allopurinol) to illustrate the limitations in using these data to inform evidence-based decision-making. Although febuxostat trials included allopurinol as a comparator, methodological limitations make comparative effectiveness evaluations difficult. However, when available trial data were input to a decision analytic model, the authors found that a significant reduction in febuxostat cost would be required in order for it to dominate allopurinol in cost effectiveness analysis. This case exemplifies the challenges of using clinical trial data in comparative and cost effectiveness analyses.

Cost-utility analysis comparing laparoscopic vs open aortobifemoral bypass surgery

Directory of Open Access Journals (Sweden)

Krog AH

2017-06-01

.001 in favor of laparoscopic aortobifemoral bypass. The total cost of surgery, equipment and hospital stay after laparoscopic surgery (9,953 € was less than open surgery (17,260 €, (p=0.001. Conclusion: Laparoscopic aortobifemoral bypass seems to be cost-effective compared with open surgery, due to an increase in QALYs and lower procedure-related costs. Keywords: laparoscopy, aortobifemoral bypass, cost-utility, quality-adjusted life years, QALYs, EQ-5D, health-related quality of life, HRQoL, cost-effectiveness

A comparative analysis of monthly out-of-pocket costs for patients with breast cancer as compared with other common cancers in Ontario, Canada

Science.gov (United States)

Longo, C.J.; Bereza, B.G.

2011-01-01

Background Monthly out-of-pocket costs (oopc) for Ontario patients with cancer have previously been reported, but little detail has been provided on differences based on tumour type. Methods A questionnaire administered in cancer clinics in the province of Ontario, with a mix of urban and rural patients, was analyzed using descriptive statistics and a regression analysis of cross-sectional data. The dependent variable was oopc (Canadian dollars), analyzed separately for total oopc (excluding imputed travel costs), and for each of the individual cost categories. Results Compared with colorectal, lung, and prostate cancer patients combined, breast cancer patients had statistically significantly higher total oopc ($393 vs. $149, p = 0.02), device costs ($142 vs. $12, p = 0.018), and family care costs ($38 vs. $3, p = 0.01). By contrast, they trended toward lower costs for travel ($225 vs. $426, p = 0.055) and had lower costs for parking ($32 vs. $53, p = 0.0198). Compared with non-breast cancer patients, patients with breast cancer reported a greater perceived financial burden (31% vs. 17% p = 0.0133). Interpretation These findings highlight that financial burden for cancer patients can vary by tumour type, and that patients with breast cancer may require a different mix of supportive services than do patients with other common tumour types. Supportive care programs related to financial burden should consider the likelihood and nature of financial burden when counselling breast cancer patients. PMID:21331267

POPCYCLE: a computer code for calculating nuclear and fossil plant levelized life-cycle power costs

International Nuclear Information System (INIS)

Hardie, R.W.

1982-02-01

POPCYCLE, a computer code designed to calculate levelized life-cycle power costs for nuclear and fossil electrical generating plants is described. Included are (1) derivations of the equations and a discussion of the methodology used by POPCYCLE, (2) a description of the input required by the code, (3) a listing of the input for a sample case, and (4) the output for a sample case

Comparing the Mass, Energy, and Cost Effects of Lightweighting in Conventional and Electric Passenger Vehicles

Directory of Open Access Journals (Sweden)

Johannes Hofer

2014-09-01

Full Text Available In this work the effect of weight reduction using advanced lightweight materials on the mass, energy use, and cost of conventional and battery electric passenger vehicles is compared. Analytic vehicle simulation is coupled with cost assessment to find the optimal degree of weight reduction minimizing manufacturing and total costs. The results show a strong secondary weight and cost saving potential for the battery electric vehicles, but a higher sensitivity of vehicle energy use to mass reduction for the conventional vehicle. Generally, light weighting has the potential to lower vehicle costs, however, the results are very sensitive to parameters affecting lifetime fuel costs for conventional and battery costs for electric vehicles. Based on current technology cost estimates it is shown that the optimal amount of primary mass reduction minimizing total costs is similar for conventional and electric vehicles and ranges from 22% to 39%, depending on vehicle range and overall use patterns. The difference between the optimal solutions minimizing manufacturing versus total costs is higher for conventional than battery electric vehicles.

A short-term cost-effectiveness study comparing robot-assisted laparoscopic and open retropubic radical prostatectomy

DEFF Research Database (Denmark)

Hohwü, Lena; Borre, Michael; Ehlers, Lars

2011-01-01

OBJECTIVE: To evaluate cost effectiveness and cost utility comparing robot-assisted laparoscopic prostatectomy (RALP) versus retropubic radical prostatectomy (RRP). METHODS: In a retrospective cohort study a total of 231 men between the age of 50 and 69 years and with clinically localised prostate....... An economic evaluation was made to estimate direct costs of the first postoperative year and an incremental cost-effectiveness ratio (ICER) per successful surgical treatment and per quality-adjusted life-year (QALY). A successful RP was defined as: no residual cancer (PSA ... high volume urology centres and utilise the full potential of each robot....

A comparative analysis of soft computing techniques for gene prediction.

Science.gov (United States)

Goel, Neelam; Singh, Shailendra; Aseri, Trilok Chand

2013-07-01

The rapid growth of genomic sequence data for both human and nonhuman species has made analyzing these sequences, especially predicting genes in them, very important and is currently the focus of many research efforts. Beside its scientific interest in the molecular biology and genomics community, gene prediction is of considerable importance in human health and medicine. A variety of gene prediction techniques have been developed for eukaryotes over the past few years. This article reviews and analyzes the application of certain soft computing techniques in gene prediction. First, the problem of gene prediction and its challenges are described. These are followed by different soft computing techniques along with their application to gene prediction. In addition, a comparative analysis of different soft computing techniques for gene prediction is given. Finally some limitations of the current research activities and future research directions are provided. Copyright © 2013 Elsevier Inc. All rights reserved.

Cost-effectiveness of vedolizumab compared with conventional therapy for ulcerative colitis patients in the UK

Directory of Open Access Journals (Sweden)

Wilson MR

2017-10-01

Full Text Available Michele R Wilson,1 Ismail Azzabi Zouraq,2 Helene Chevrou-Severac,2 Ross Selby,3 Matthew C Kerrigan4 1RTI Health Solutions, Research Triangle Park, NC, USA; 2Takeda Pharmaceuticals International AG, Zurich, Switzerland; 3Takeda UK Ltd., Bucks, UK; 4PHMR Limited, London, UK Objective: To examine the clinical and economic impact of vedolizumab compared with conventional therapy in the treatment of moderately-to-severely active ulcerative colitis (UC in the UK based on results of the GEMINI I trial. Methods: A decision-analytic model in Microsoft Excel was used to compare vedolizumab with conventional therapy (aminosalicylates, corticosteroids, immunomodulators for the treatment of patients with UC in the UK. We considered the following three populations: the overall intent-to-treat population from the GEMINI I trial, patients naïve to anti-TNF therapy, and those who had failed anti-TNF-therapy. Population characteristics and efficacy data were obtained from the GEMINI I trial. Other inputs (eg, unit costs, probability of surgery, mortality were obtained from published literature. Time horizon was a lifetime horizon, with costs and outcomes discounted by 3.5% per year. One-way and probabilistic sensitivity analyses were conducted to measure the impact of parameter uncertainty. Results: Vedolizumab had incremental cost-effectiveness ratios of £4,095/quality-adjusted life-year (QALY, £4,423/QALY, and £5,972/QALY compared with conventional therapy in the intent-to-treat, anti-TNF-naïve, and anti-TNF-failure populations, respectively. Patients on vedolizumab accrued more QALYs while incurring more costs than patients on conventional therapy. The sensitivity analyses showed that the results were most sensitive to induction response and transition probabilities for each treatment. Conclusion: The results suggest that vedolizumab results in more QALYs and may be a cost-effective treatment option compared with conventional therapy for both anti

Incremental cost of department-wide implementation of a picture archiving and communication system and computed radiography.

Science.gov (United States)

Pratt, H M; Langlotz, C P; Feingold, E R; Schwartz, J S; Kundel, H L

1998-01-01

To determine the incremental cash flows associated with department-wide implementation of a picture archiving and communication system (PACS) and computed radiography (CR) at a large academic medical center. The authors determined all capital and operational costs associated with PACS implementation during an 8-year time horizon. Economic effects were identified, adjusted for time value, and used to calculate net present values (NPVs) for each section of the department of radiology and for the department as a whole. The chest-bone section used the most resources. Changes in cost assumptions for the chest-bone section had a dominant effect on the department-wide NPV. The base-case NPV (i.e., that determined by using the initial assumptions) was negative, indicating that additional net costs are incurred by the radiology department from PACS implementation. PACS and CR provide cost savings only when a 12-year hardware life span is assumed, when CR equipment is removed from the analysis, or when digitized long-term archives are compressed at a rate of 10:1. Full PACS-CR implementation would not provide cost savings for a large, subspecialized department. However, institutions that are committed to CR implementation (for whom CR implementation would represent a sunk cost) or institutions that are able to archive images by using image compression will experience cost savings from PACS.

Decision making based on analysis of benefit versus costs of preventive retrofit versus costs of repair after earthquake hazards

Science.gov (United States)

Bostenaru Dan, M.

2012-04-01

dissipaters) to different amount and location in the building was considered. Device computations, a civil engineering method for building economics (and which was, before statistics existed, also the method for computing the costs of general upgrade of buildings), were done for the retrofit and for the repair measures, being able to be applied for different countries, also ones where there is no database on existing projects in seismic retrofit. The building elements for which the device computations were done are named "retrofit elements" and they can be new elements, modified elements or replaced elements of the initial building. The addition of the devices is simple, as the row in project management was, but, for the sake of comparison, also complex project management computed in other works was compared for innovative measures such as FRP (with glass and fibre). The theoretical costs for model measures were compared to the way costs of real retrofit for this building type (with reinforced concrete jacketing and FRP) are computed in Greece. The theoretical proposed measures were generally compared to those applied in practice, in Romania and Italy as well. A further study will include these, as in Italy diagonal braces with dissipation had been used. The typology of braces is relevant also for the local seismic culture, maybe outgoing for another type of skeleton structures the distribution of which has been studied: the timber skeleton. A subtype of Romanian reinforced concrete skeleton buildings includes diagonal braces. In order to assess the costs of rebuilding or general upgrade without retrofit, architecture methods for building economics are considered based on floor surface. Diagrams have been built to see how the total costs vary as addition between the preventive retrofit and the post-earthquake repair, and tables to compare to the costs of rebuilding, outgoing from a the model of addition of day-lighting in atria of buildings. The moment when a repair measure

Arms control verification costs: the need for a comparative analysis

International Nuclear Information System (INIS)

MacLean, G.; Fergusson, J.

1998-01-01

The end of the Cold War era has presented practitioners and analysts of international non-proliferation, arms control and disarmament (NACD) the opportunity to focus more intently on the range and scope of NACD treaties and their verification. Aside from obvious favorable and well-publicized developments in the field of nuclear non-proliferation, progress also has been made in a wide variety of arenas, ranging from chemical and biological weapons, fissile material, conventional forces, ballistic missiles, to anti-personnel landmines. Indeed, breaking from the constraints imposed by the Cold War United States-Soviet adversarial zero-sum relationship that impeded the progress of arms control, particularly on a multilateral level, the post Cold War period has witnessed significant developments in NACD commitments, initiatives, and implementation. The goals of this project - in its final iteration - will be fourfold. First, it will lead to the creation of a costing analysis model adjustable for uses in several current and future arms control verification tasks. Second, the project will identify data accumulated in the cost categories outlined in Table 1 in each of the five cases. By comparing costs to overall effectiveness, the application of the model will demonstrate desirability in each of the cases (see Chart 1). Third, the project will identify and scrutinize 'political costs' as well as real expenditures and investment in the verification regimes (see Chart 2). And, finally, the project will offer some analysis on the relationship between national and multilateral forms of arms control verification, as well as the applicability of multilateralism as an effective tool in the verification of international non-proliferation, arms control, and disarmament agreements. (author)

Measurements by activation foils and comparative computations by MCNP code

International Nuclear Information System (INIS)

Kyncl, J.

2008-01-01

Systematic study of the radioactive waste minimisation problem is subject of the SPHINX project. Its idea is that burning or transmutation of the waste inventory problematic part will be realized in a nuclear reactor the fuel of which is in the form of liquid fluorides. In frame of the project, several experiments have been performed with so-called inserted experimental channel. The channel was filled up by the fluorides mixture, surrounded by six fuel assemblies with moderator and placed into LR-0 reactor vessel. This formation was brought to critical state and measurement with activation foil detectors were carried out at selected positions of the inserted channel. Main aim of the measurements was to determine reaction rates for the detectors mentioned. For experiment evaluation, comparative computations were accomplished by code MCNP4a. The results obtained show that very often, computed values of reaction rates differ substantially from the values that were obtained from the experiment. This contribution deals with analysis of the reasons of these differences from the point of view of computations by Monte Carlo method. The analysis of concrete cases shows that the inaccuracy of reaction rate computed is caused mostly by three circumstances:-space region that is occupied by detector is relatively very small;- microscopic effective cross-section R(E) of the reaction changes strongly with energy just in the energy interval that gives the greatest contribution to the reaction; - in the energy interval that gives the greatest contribution to reaction rate, the error of the computed neutron flux is great. These circumstances evoke that the computation of reaction rate with casual accuracy submits extreme demands on computing time. (Author)

Costs of traffic injuries

DEFF Research Database (Denmark)

Kruse, Marie

2015-01-01

assessed using Danish national healthcare registers. Productivity costs were computed using duration analysis (Cox regression models). In a subanalysis, cost per severe traffic injury was computed for the 12 995 individuals that experienced a severe injury. RESULTS: The socioeconomic cost of a traffic...... injury was €1406 (2009 price level) in the first year, and €8950 over a 10-year period. Per 100 000 population, the 10-year cost was €6 565 668. A severe traffic injury costs €4969 per person in the first year, and €4 006 685 per 100 000 population over a 10-year period. Victims of traffic injuries...

Learning Together; part 2: training costs and health gain - a cost analysis.

Science.gov (United States)

Cullen, Katherine; Riches, Wendy; Macaulay, Chloe; Spicer, John

2017-01-01

Learning Together is a complex educational intervention aimed at improving health outcomes for children and young people. There is an additional cost as two doctors are seeing patients together for a longer appointment than a standard general practice (GP) appointment. Our approach combines the impact of the training clinics on activity in South London in 2014-15 with health gain, using NICE guidance and standards to allow comparison of training options. Activity data was collected from Training Practices hosting Learning Together. A computer based model was developed to analyse the costs of the Learning Together intervention compared to usual training in a partial economic evaluation. The results of the model were used to value the health gain required to make the intervention cost effective. Data were returned for 363 patients booked into 61 clinics across 16 Training Practices. Learning Together clinics resulted in an increase in costs of £37 per clinic. Threshold analysis illustrated one child with a common illness like constipation needs to be well for two weeks, in one Practice hosting four training clinics for the clinics to be considered cost effective. Learning Together is of minimal training cost. Our threshold analysis produced a rubric that can be used locally to test cost effectiveness at a Practice or Programme level.

Selecting an Architecture for a Safety-Critical Distributed Computer System with Power, Weight and Cost Considerations

Science.gov (United States)

Torres-Pomales, Wilfredo

2014-01-01

This report presents an example of the application of multi-criteria decision analysis to the selection of an architecture for a safety-critical distributed computer system. The design problem includes constraints on minimum system availability and integrity, and the decision is based on the optimal balance of power, weight and cost. The analysis process includes the generation of alternative architectures, evaluation of individual decision criteria, and the selection of an alternative based on overall value. In this example presented here, iterative application of the quantitative evaluation process made it possible to deliberately generate an alternative architecture that is superior to all others regardless of the relative importance of cost.

Comparative and Cumulative Energetic Costs of Odontocete Responses to Anthropogenic Disturbance

Science.gov (United States)

2015-09-30

communicative sound and click production and the metabolic costs of changes in vocal behavior in bottlenose dolphins, have empirically measured the...marine mammals . OBJECTIVES This investigation comprises five major objectives, executed over three years. The objectives are: (1) compare the...through The Marine Mammal Stranding Program and selected the best scans for our investigation. Analysis of CT scan data (see Fig. 2) have been

Targeted Therapies Compared to Dacarbazine for Treatment of BRAFV600E Metastatic Melanoma: A Cost-Effectiveness Analysis

Directory of Open Access Journals (Sweden)

Vanessa Shih

2015-01-01

Full Text Available Purpose. Two BRAFV600E targeted therapies, dabrafenib and vemurafenib, have received US approval for treatment of metastatic melanoma in BRAFV600E patients, a mutation that affects ~50% of patients. We evaluated the cost-effectiveness of BRAF inhibitors and traditional chemotherapy for treatment of metastatic melanoma. Methods. A Markov model was developed using a societal perspective. Transition probabilities were derived from two Phase III registration trials comparing each BRAF inhibitor against dacarbazine. Costs were obtained from literature, national databases, and Medicare fee schedules. Utilities were obtained from published literature. Deterministic and probabilistic sensitivity analyses were run to test the impact of uncertainties. Results. The incremental cost-effectiveness ratio of dabrafenib was $149,035/QALY compared to dacarbazine. Vemurafenib was dominated by dabrafenib. Probabilistic sensitivity analysis showed that, at a willingness-to-pay (WTP threshold of ≤$100,000/QALY, dacarbazine was the optimal treatment in ~85% of simulations. At a WTP threshold of ≥$150,000/QALY, dabrafenib was the optimal treatment. Conclusion. Compared with dacarbazine, dabrafenib and vemurafenib were not cost-effective at a willingness-to-pay threshold of $100,000/QALY. Dabrafenib is more efficient compared to vemurafenib. With few treatment options, dabrafenib is an option for qualifying patients if the overall cost of dabrafenib is reduced to $30,000–$31,000 or a WTP threshold of ≥$150,000/QALY is considered. More comparative data is needed.

Bioinformatics tools for development of fast and cost effective simple ...

African Journals Online (AJOL)

Bioinformatics tools for development of fast and cost effective simple sequence repeat ... comparative mapping and exploration of functional genetic diversity in the ... Already, a number of computer programs have been implemented that aim at ...

Social incidence and economic costs of carbon limits; A computable general equilibrium analysis for Switzerland

Energy Technology Data Exchange (ETDEWEB)

Stephan, G.; Van Nieuwkoop, R.; Wiedmer, T. (Institute for Applied Microeconomics, Univ. of Bern (Switzerland))

1992-01-01

Both distributional and allocational effects of limiting carbon dioxide emissions in a small and open economy are discussed. It starts from the assumption that Switzerland attempts to stabilize its greenhouse gas emissions over the next 25 years, and evaluates costs and benefits of the respective reduction programme. From a methodological viewpoint, it is illustrated how a computable general equilibrium approach can be adopted for identifying economic effects of cutting greenhouse gas emissions on the national level. From a political economy point of view it considers the social incidence of a greenhouse policy. It shows in particular that public acceptance can be increased and economic costs of greenhouse policies can be reduced, if carbon taxes are accompanied by revenue redistribution. 8 tabs., 1 app., 17 refs.

Cost-effectiveness of intensive multifactorial treatment compared with routine care for individuals with screen-detected Type 2 diabetes

DEFF Research Database (Denmark)

Tao, L; Wilson, E C F; Wareham, N J

2015-01-01

, falling to £37 500 over 30 years. The ICER fell below £30 000 only when the intervention cost was below £631 per patient: we estimated the cost at £981. Conclusion Given conventional thresholds of cost-effectiveness, the intensive treatment delivered in ADDITION was not cost-effective compared......Aims To examine the short- and long-term cost-effectiveness of intensive multifactorial treatment compared with routine care among people with screen-detected Type 2 diabetes. Methods Cost–utility analysis in ADDITION-UK, a cluster-randomized controlled trial of early intensive treatment in people...... at 3.5%). Adjusted incremental QALYs were 0.0000, – 0.0040, 0.0140 and 0.0465 over the same time horizons. Point estimate incremental cost-effectiveness ratios (ICERs) suggested that the intervention was not cost-effective although the ratio improved over time: the ICER over 10 years was £82 250...

Security Problems in Cloud Computing

Directory of Open Access Journals (Sweden)

Rola Motawie

2016-12-01

Full Text Available Cloud is a pool of computing resources which are distributed among cloud users. Cloud computing has many benefits like scalability, flexibility, cost savings, reliability, maintenance and mobile accessibility. Since cloud-computing technology is growing day by day, it comes with many security problems. Securing the data in the cloud environment is most critical challenges which act as a barrier when implementing the cloud. There are many new concepts that cloud introduces, such as resource sharing, multi-tenancy, and outsourcing, create new challenges for the security community. In this work, we provide a comparable study of cloud computing privacy and security concerns. We identify and classify known security threats, cloud vulnerabilities, and attacks.

COMPARATIVE ANALYSIS FOR THE PRACTICAL PRACTICE OF COST CALCULATION

Directory of Open Access Journals (Sweden)

Veronika Fenyves

2015-07-01

Full Text Available Basic topic of our treatise is to introduce the system of cost calculation. Our reason for choice of this topic is that, in the economic environment of today, it is very important for a production company to have the most possible accurate knowledge about costs of the activity. This informational demand emerges in case of more and more managing entities since the cost cutback is often the only tool for retaining the competitiveness – of course, within certain frameworks. There is a frequent question among the corporate owners and management: “How could our costs be cut – even if only to a small extent?” One of the devices is the moderation of the activity costs, in order to do this it is essential to know how much the production of the unit of product costs for the company, that is to say, how many its first cost is. Our goal is to aim the attention at values and importance of the management information system as well as information obtained during determination of the cost, the differences in results of the individual cost calculation methods and the reasons of differences. In addition, our intention was to know and acquaint a complex cost calculation procedure in depth during which we endeavoured to form a system theory of a kind.

The cost and cost-effectiveness of expedited partner therapy compared with standard partner referral for the treatment of chlamydia or gonorrhea.

Science.gov (United States)

Gift, Thomas L; Kissinger, Patricia; Mohammed, Hamish; Leichliter, Jami S; Hogben, Matthew; Golden, Matthew R

2011-11-01

Partner treatment is an important component of sexually transmitted disease control. Several randomized controlled trials have compared expedited partner treatment (EPT) to unassisted standard partner referral (SR). All of these trials found that EPT significantly increased partner treatment over SR, whereas some found that EPT significantly lowered reinfection rates in index patients. We collected cost data to assess the payer-specific, health care system, and societal-level cost of EPT and SR. We used data on partner treatment and index patient reinfection rates from 2 randomized controlled trials examining EPT and SR for patients diagnosed with chlamydia or gonorrhea. Additional elements were estimated or drawn from the literature. We used a Monte Carlo simulation to assess the impact on cost and effectiveness of varying several variables simultaneously, and calculated threshold values for selected variables at which EPT and SR costs per patient were equal. From a health care system or societal perspective, EPT was less costly and it treated more partners than SR. From the perspective of an individual payer, EPT was less costly than SR if ≥32% to 37% of male index patients' female partners or ≥29% of female index patients' male partners received care from the same payer. EPT has a lower cost from a societal or health care system perspective than SR and treats more partners. Individual payers may find EPT to be more costly than SR, depending on how many of their patients' partners receive care from the same payer.

The comparative cost-effectiveness of colorectal cancer screening using faecal immunochemical test vs. colonoscopy.

Science.gov (United States)

Wong, Martin C S; Ching, Jessica Y L; Chan, Victor C W; Sung, Joseph J Y

2015-09-04

Faecal immunochemical tests (FITs) and colonoscopy are two common screening tools for colorectal cancer(CRC). Most cost-effectiveness studies focused on survival as the outcome, and were based on modeling techniques instead of real world observational data. This study evaluated the cost-effectiveness of these two tests to detect colorectal neoplastic lesions based on data from a 5-year community screening service. The incremental cost-effectiveness ratio (ICER) was assessed based on the detection rates of neoplastic lesions, and costs including screening compliance, polypectomy, colonoscopy complications, and staging of CRC detected. A total of 5,863 patients received yearly FIT and 4,869 received colonoscopy. Compared with FIT, colonoscopy detected notably more adenomas (23.6% vs. 1.6%) and advanced lesions or cancer (4.2% vs. 1.2%). Using FIT as control, the ICER of screening colonoscopy in detecting adenoma, advanced adenoma, CRC and a composite endpoint of either advanced adenoma or stage I CRC was US$3,489, US$27,962, US$922,762 and US$23,981 respectively. The respective ICER was US$3,597, US$439,513, -US$2,765,876 and US$32,297 among lower-risk subjects; whilst the corresponding figure was US$3,153, US$14,852, US$184,162 and US$13,919 among higher-risk subjects. When compared to FIT, colonoscopy is considered cost-effective for screening adenoma, advanced neoplasia, and a composite endpoint of advanced neoplasia or stage I CRC.

Comparative Cost-Effectiveness of Stereotactic Body Radiation Therapy Versus Intensity-Modulated and Proton Radiation Therapy for Localized Prostate Cancer

International Nuclear Information System (INIS)

Parthan, Anju; Pruttivarasin, Narin; Davies, Diane; Taylor, Douglas C. A.; Pawar, Vivek; Bijlani, Akash; Lich, Kristen Hassmiller; Chen, Ronald C.

2012-01-01

Objective: To determine the cost-effectiveness of several external beam radiation treatment modalities for the treatment of patients with localized prostate cancer. Methods: A lifetime Markov model incorporated the probabilities of experiencing treatment-related long-term toxicity or death. Toxicity probabilities were derived from published sources using meta-analytical techniques. Utilities and costs in the model were obtained from publicly available secondary sources. The model calculated quality-adjusted life expectancy and expected lifetime cost per patient, and derived ratios of incremental cost per quality-adjusted life year (QALY) gained between treatments. Analyses were conducted from both payer and societal perspectives. One-way and probabilistic sensitivity analyses were performed. Results: Compared to intensity-modulated radiation therapy (IMRT) and proton beam therapy (PT), stereotactic body radiation therapy (SBRT) was less costly and resulted in more QALYs. Sensitivity analyses showed that the conclusions in the base-case scenario were robust with respect to variations in toxicity and cost parameters consistent with available evidence. At a threshold of $50,000/QALY, SBRT was cost-effective in 75% and 94% of probabilistic simulations compared to IMRT and PT, respectively, from a payer perspective. From a societal perspective, SBRT was cost-effective in 75% and 96% of simulations compared to IMRT and PT, respectively, at a threshold of $50,000/QALY. In threshold analyses, SBRT was less expensive with better outcomes compared to IMRT at toxicity rates 23% greater than the SBRT base-case rates. Conclusion: Based on the assumption that each treatment modality results in equivalent long-term efficacy, SBRT is a cost-effective strategy resulting in improved quality-adjusted survival compared to IMRT and PT for the treatment of localized prostate cancer.

Automated cost modeling for coal combustion systems

International Nuclear Information System (INIS)

Rowe, R.M.; Anast, K.R.

1991-01-01

This paper reports on cost information developed at AMAX R and D Center for coal-water slurry production implemented in an automated spreadsheet (Lotus 123) for personal computer use. The spreadsheet format allows the user toe valuate impacts of various process options, coal feedstock characteristics, fuel characteristics, plant location sites, and plant sizes on fuel cost. Model flexibility reduces time and labor required to determine fuel costs and provides a basis to compare fuels manufactured by different processes. The model input includes coal characteristics, plant flowsheet definition, plant size, and market location. Based on these inputs, selected unit operations are chosen for coal processing

A Low-Cost Computer-Controlled Arduino-Based Educational Laboratory System for Teaching the Fundamentals of Photovoltaic Cells

Science.gov (United States)

Zachariadou, K.; Yiasemides, K.; Trougkakos, N.

2012-01-01

We present a low-cost, fully computer-controlled, Arduino-based, educational laboratory (SolarInsight) to be used in undergraduate university courses concerned with electrical engineering and physics. The major goal of the system is to provide students with the necessary instrumentation, software tools and methodology in order to learn fundamental…

Results of comparative RBMK neutron computation using VNIIEF codes (cell computation, 3D statics, 3D kinetics). Final report

Energy Technology Data Exchange (ETDEWEB)

Grebennikov, A.N.; Zhitnik, A.K.; Zvenigorodskaya, O.A. [and others

1995-12-31

In conformity with the protocol of the Workshop under Contract {open_quotes}Assessment of RBMK reactor safety using modern Western Codes{close_quotes} VNIIEF performed a neutronics computation series to compare western and VNIIEF codes and assess whether VNIIEF codes are suitable for RBMK type reactor safety assessment computation. The work was carried out in close collaboration with M.I. Rozhdestvensky and L.M. Podlazov, NIKIET employees. The effort involved: (1) cell computations with the WIMS, EKRAN codes (improved modification of the LOMA code) and the S-90 code (VNIIEF Monte Carlo). Cell, polycell, burnup computation; (2) 3D computation of static states with the KORAT-3D and NEU codes and comparison with results of computation with the NESTLE code (USA). The computations were performed in the geometry and using the neutron constants presented by the American party; (3) 3D computation of neutron kinetics with the KORAT-3D and NEU codes. These computations were performed in two formulations, both being developed in collaboration with NIKIET. Formulation of the first problem maximally possibly agrees with one of NESTLE problems and imitates gas bubble travel through a core. The second problem is a model of the RBMK as a whole with imitation of control and protection system controls (CPS) movement in a core.

Comparing the cost of spinal MR with conventional myelography and radiculography

International Nuclear Information System (INIS)

Du Boulay, G.H.; Teather, B.A.; Teather, D.; Hawkes, S.; Lee, C.C.

1990-01-01

All spinal magnetic resonance imaging examinations carried out during a three month period were analysed retrospectively in order to determine the clinical reasons for the scan requests. Costs were compared with those for patients submitted for myelography and radiculography at the adjacent hospital during the same period. The comparison indicated that spinal MR was less costly than myelography and radiculography. The most important element of the extra cost of myelography related to the need to admit patients to hospital for at least one night for this examination because of the linkelihood of headache and other common (though usually minor) complications following lumbar puncture and/or the injection of contrast medium. From the limited information that it was possible to obtain in the period of follow up, it appeared that MR had either been superior or equivalent to myelography or radiculography in all the clinical groups of patients where both could be tested. There were a number of groups in which no myelograms had been requested, presumably because clinical suspicions had pointed toward conditions like tumours, developmental abnormalities and demyelinating diseases in which neurologists and neurosurgeons have already made up their minds about the superiority of MR. (orig./MG)

Early‐Stage Capital Cost Estimation of Biorefinery Processes: A Comparative Study of Heuristic Techniques

Science.gov (United States)

Couturier, Jean‐Luc; Kokossis, Antonis; Dubois, Jean‐Luc

2016-01-01

Abstract Biorefineries offer a promising alternative to fossil‐based processing industries and have undergone rapid development in recent years. Limited financial resources and stringent company budgets necessitate quick capital estimation of pioneering biorefinery projects at the early stages of their conception to screen process alternatives, decide on project viability, and allocate resources to the most promising cases. Biorefineries are capital‐intensive projects that involve state‐of‐the‐art technologies for which there is no prior experience or sufficient historical data. This work reviews existing rapid cost estimation practices, which can be used by researchers with no previous cost estimating experience. It also comprises a comparative study of six cost methods on three well‐documented biorefinery processes to evaluate their accuracy and precision. The results illustrate discrepancies among the methods because their extrapolation on biorefinery data often violates inherent assumptions. This study recommends the most appropriate rapid cost methods and urges the development of an improved early‐stage capital cost estimation tool suitable for biorefinery processes. PMID:27484398

Use of several Cloud Computing approaches for climate modelling: performance, costs and opportunities

Science.gov (United States)

Perez Montes, Diego A.; Añel Cabanelas, Juan A.; Wallom, David C. H.; Arribas, Alberto; Uhe, Peter; Caderno, Pablo V.; Pena, Tomas F.

2017-04-01

Cloud Computing is a technological option that offers great possibilities for modelling in geosciences. We have studied how two different climate models, HadAM3P-HadRM3P and CESM-WACCM, can be adapted in two different ways to run on Cloud Computing Environments from three different vendors: Amazon, Google and Microsoft. Also, we have evaluated qualitatively how the use of Cloud Computing can affect the allocation of resources by funding bodies and issues related to computing security, including scientific reproducibility. Our first experiments were developed using the well known ClimatePrediction.net (CPDN), that uses BOINC, over the infrastructure from two cloud providers, namely Microsoft Azure and Amazon Web Services (hereafter AWS). For this comparison we ran a set of thirteen month climate simulations for CPDN in Azure and AWS using a range of different virtual machines (VMs) for HadRM3P (50 km resolution over South America CORDEX region) nested in the global atmosphere-only model HadAM3P. These simulations were run on a single processor and took between 3 and 5 days to compute depending on the VM type. The last part of our simulation experiments was running WACCM over different VMS on the Google Compute Engine (GCE) and make a comparison with the supercomputer (SC) Finisterrae1 from the Centro de Supercomputacion de Galicia. It was shown that GCE gives better performance than the SC for smaller number of cores/MPI tasks but the model throughput shows clearly how the SC performance is better after approximately 100 cores (related with network speed and latency differences). From a cost point of view, Cloud Computing moves researchers from a traditional approach where experiments were limited by the available hardware resources to monetary resources (how many resources can be afforded). As there is an increasing movement and recommendation for budgeting HPC projects on this technology (budgets can be calculated in a more realistic way) we could see a shift on

Computer-assisted cognitive remediation therapy in schizophrenia: Durability of the effects and cost-utility analysis.

Science.gov (United States)

Garrido, Gemma; Penadés, Rafael; Barrios, Maite; Aragay, Núria; Ramos, Irene; Vallès, Vicenç; Faixa, Carlota; Vendrell, Josep M

2017-08-01

The durability of computer-assisted cognitive remediation (CACR) therapy over time and the cost-effectiveness of treatment remains unclear. The aim of the current study is to investigate the effectiveness of CACR and to examine the use and cost of acute psychiatric admissions before and after of CACR. Sixty-seven participants were initially recruited. For the follow-up study a total of 33 participants were enrolled, 20 to the CACR condition group and 13 to the active control condition group. All participants were assessed at baseline, post-therapy and 12 months post-therapy on neuropsychology, QoL and self-esteem measurements. The use and cost of acute psychiatric admissions were collected retrospectively at four assessment points: baseline, 12 months post-therapy, 24 months post-therapy, and 36 months post-therapy. The results indicated that treatment effectiveness persisted in the CACR group one year post-therapy on neuropsychological and well-being outcomes. The CACR group showed a clear decrease in the use of acute psychiatric admissions at 12, 24 and 36 months post-therapy, which lowered the global costs the acute psychiatric admissions at 12, 24 and 36 months post-therapy. The CACR is durable over at least a 12-month period, and CACR may be helping to reduce health care costs for schizophrenia patients. Copyright © 2017 Elsevier Ireland Ltd. All rights reserved.

Comparative cost-effectiveness of Option B+ for prevention of mother-to-child transmission of HIV in Malawi.

Science.gov (United States)

Tweya, Hannock; Keiser, Olivia; Haas, Andreas D; Tenthani, Lyson; Phiri, Sam; Egger, Matthias; Estill, Janne

2016-03-27

To estimate the cost-effectiveness of prevention of mother-to-child transmission (MTCT) of HIV with lifelong antiretroviral therapy (ART) for pregnant and breastfeeding women ('Option B+') compared with ART during pregnancy or breastfeeding only unless clinically indicated ('Option B'). Mathematical modelling study of first and second pregnancy, informed by data from the Malawi Option B+ programme. Individual-based simulation model. We simulated cohorts of 10 000 women and their infants during two subsequent pregnancies, including the breastfeeding period, with either Option B+ or B. We parameterized the model with data from the literature and by analysing programmatic data. We compared total costs of antenatal and postnatal care, and lifetime costs and disability-adjusted life-years of the infected infants between Option B+ and Option B. During the first pregnancy, 15% of the infants born to HIV-infected mothers acquired the infection. With Option B+, 39% of the women were on ART at the beginning of the second pregnancy, compared with 18% with Option B. For second pregnancies, the rates MTCT were 11.3% with Option B+ and 12.3% with Option B. The incremental cost-effectiveness ratio comparing the two options ranged between about US$ 500 and US$ 1300 per DALY averted. Option B+ prevents more vertical transmissions of HIV than Option B, mainly because more women are already on ART at the beginning of the next pregnancy. Option B+ is a cost-effective strategy for PMTCT if the total future costs and lost lifetime of the infected infants are taken into account.

Comparative Cost-Effectiveness Analysis of Three Different Automated Medication Systems Implemented in a Danish Hospital Setting.

Science.gov (United States)

Risør, Bettina Wulff; Lisby, Marianne; Sørensen, Jan

2018-02-01

Automated medication systems have been found to reduce errors in the medication process, but little is known about the cost-effectiveness of such systems. The objective of this study was to perform a model-based indirect cost-effectiveness comparison of three different, real-world automated medication systems compared with current standard practice. The considered automated medication systems were a patient-specific automated medication system (psAMS), a non-patient-specific automated medication system (npsAMS), and a complex automated medication system (cAMS). The economic evaluation used original effect and cost data from prospective, controlled, before-and-after studies of medication systems implemented at a Danish hematological ward and an acute medical unit. Effectiveness was described as the proportion of clinical and procedural error opportunities that were associated with one or more errors. An error was defined as a deviation from the electronic prescription, from standard hospital policy, or from written procedures. The cost assessment was based on 6-month standardization of observed cost data. The model-based comparative cost-effectiveness analyses were conducted with system-specific assumptions of the effect size and costs in scenarios with consumptions of 15,000, 30,000, and 45,000 doses per 6-month period. With 30,000 doses the cost-effectiveness model showed that the cost-effectiveness ratio expressed as the cost per avoided clinical error was €24 for the psAMS, €26 for the npsAMS, and €386 for the cAMS. Comparison of the cost-effectiveness of the three systems in relation to different valuations of an avoided error showed that the psAMS was the most cost-effective system regardless of error type or valuation. The model-based indirect comparison against the conventional practice showed that psAMS and npsAMS were more cost-effective than the cAMS alternative, and that psAMS was more cost-effective than npsAMS.

Challenges and opportunities of cloud computing for atmospheric sciences

Science.gov (United States)

Pérez Montes, Diego A.; Añel, Juan A.; Pena, Tomás F.; Wallom, David C. H.

2016-04-01

Cloud computing is an emerging technological solution widely used in many fields. Initially developed as a flexible way of managing peak demand it has began to make its way in scientific research. One of the greatest advantages of cloud computing for scientific research is independence of having access to a large cyberinfrastructure to fund or perform a research project. Cloud computing can avoid maintenance expenses for large supercomputers and has the potential to 'democratize' the access to high-performance computing, giving flexibility to funding bodies for allocating budgets for the computational costs associated with a project. Two of the most challenging problems in atmospheric sciences are computational cost and uncertainty in meteorological forecasting and climate projections. Both problems are closely related. Usually uncertainty can be reduced with the availability of computational resources to better reproduce a phenomenon or to perform a larger number of experiments. Here we expose results of the application of cloud computing resources for climate modeling using cloud computing infrastructures of three major vendors and two climate models. We show how the cloud infrastructure compares in performance to traditional supercomputers and how it provides the capability to complete experiments in shorter periods of time. The monetary cost associated is also analyzed. Finally we discuss the future potential of this technology for meteorological and climatological applications, both from the point of view of operational use and research.

Cost effectiveness of pediatric pneumococcal conjugate vaccines: a comparative assessment of decision-making tools.

Science.gov (United States)

Chaiyakunapruk, Nathorn; Somkrua, Ratchadaporn; Hutubessy, Raymond; Henao, Ana Maria; Hombach, Joachim; Melegaro, Alessia; Edmunds, John W; Beutels, Philippe

2011-05-12

Several decision support tools have been developed to aid policymaking regarding the adoption of pneumococcal conjugate vaccine (PCV) into national pediatric immunization programs. The lack of critical appraisal of these tools makes it difficult for decision makers to understand and choose between them. With the aim to guide policymakers on their optimal use, we compared publicly available decision-making tools in relation to their methods, influential parameters and results. The World Health Organization (WHO) requested access to several publicly available cost-effectiveness (CE) tools for PCV from both public and private provenance. All tools were critically assessed according to the WHO's guide for economic evaluations of immunization programs. Key attributes and characteristics were compared and a series of sensitivity analyses was performed to determine the main drivers of the results. The results were compared based on a standardized set of input parameters and assumptions. Three cost-effectiveness modeling tools were provided, including two cohort-based (Pan-American Health Organization (PAHO) ProVac Initiative TriVac, and PneumoADIP) and one population-based model (GlaxoSmithKline's SUPREMES). They all compared the introduction of PCV into national pediatric immunization program with no PCV use. The models were different in terms of model attributes, structure, and data requirement, but captured a similar range of diseases. Herd effects were estimated using different approaches in each model. The main driving parameters were vaccine efficacy against pneumococcal pneumonia, vaccine price, vaccine coverage, serotype coverage and disease burden. With a standardized set of input parameters developed for cohort modeling, TriVac and PneumoADIP produced similar incremental costs and health outcomes, and incremental cost-effectiveness ratios. Vaccine cost (dose price and number of doses), vaccine efficacy and epidemiology of critical endpoint (for example

Cloud Computing Bible

CERN Document Server

Sosinsky, Barrie

2010-01-01

The complete reference guide to the hot technology of cloud computingIts potential for lowering IT costs makes cloud computing a major force for both IT vendors and users; it is expected to gain momentum rapidly with the launch of Office Web Apps later this year. Because cloud computing involves various technologies, protocols, platforms, and infrastructure elements, this comprehensive reference is just what you need if you'll be using or implementing cloud computing.Cloud computing offers significant cost savings by eliminating upfront expenses for hardware and software; its growing popularit

Cost-effectiveness of clinical decision support system in improving maternal health care in Ghana.

Directory of Open Access Journals (Sweden)

Maxwell Ayindenaba Dalaba

Full Text Available This paper investigated the cost-effectiveness of a computer-assisted Clinical Decision Support System (CDSS in the identification of maternal complications in Ghana.A cost-effectiveness analysis was performed in a before- and after-intervention study. Analysis was conducted from the provider's perspective. The intervention area was the Kassena- Nankana district where computer-assisted CDSS was used by midwives in maternal care in six selected health centres. Six selected health centers in the Builsa district served as the non-intervention group, where the normal Ghana Health Service activities were being carried out.Computer-assisted CDSS increased the detection of pregnancy complications during antenatal care (ANC in the intervention health centres (before-intervention = 9 /1,000 ANC attendance; after-intervention = 12/1,000 ANC attendance; P-value = 0.010. In the intervention health centres, there was a decrease in the number of complications during labour by 1.1%, though the difference was not statistically significant (before-intervention =107/1,000 labour clients; after-intervention = 96/1,000 labour clients; P-value = 0.305. Also, at the intervention health centres, the average cost per pregnancy complication detected during ANC (cost -effectiveness ratio decreased from US$17,017.58 (before-intervention to US$15,207.5 (after-intervention. Incremental cost -effectiveness ratio (ICER was estimated at US$1,142. Considering only additional costs (cost of computer-assisted CDSS, cost per pregnancy complication detected was US$285.Computer -assisted CDSS has the potential to identify complications during pregnancy and marginal reduction in labour complications. Implementing computer-assisted CDSS is more costly but more effective in the detection of pregnancy complications compared to routine maternal care, hence making the decision to implement CDSS very complex. Policy makers should however be guided by whether the additional benefit is worth

Evaluation of mini super computers for nuclear design applications

International Nuclear Information System (INIS)

Altomare, S.; Baradari, F.

1987-01-01

The evolution of the mini super computers will force changes from the current environment of performing nuclear design calculations on mainframe computers (such as a CRAY) to mini super computers. This change will come about for a number of reasons. First, the mini super computers currently available in the marketplace offer the power and speed comparable to mainframes and can provide the capability to support highly computer intensive calculations. Second, the equipment is physically smaller and can easily be installed and operated without extensive investments in facilities and operations support. Third, the computer capacity can be acquired with as much needed memory, disk, and tape capacity as may be needed. Another reasons is that the performance/cost ratio has increased drastically as hardware costs have decreased. A study was conducted at the Westinghouse Commercial Nuclear Fuel Division (CNFD) to evaluate the mini super computers for use in nuclear core design. As a result of this evaluation, Westinghouse CNFD is offering a combined hardware/software technology transfer package for core design. This package provides the utility designer with a totally dedicated mini super computer comparable in speed to the CRAY 1S with sufficient capacity for a sizable design group to perform the engineering activities related to nuclear core design and operations support. This also assures the utility of being totally compatible with the CNFD design codes, thus assuring total update compatibility

Energy consumption program: A computer model simulating energy loads in buildings

Science.gov (United States)

Stoller, F. W.; Lansing, F. L.; Chai, V. W.; Higgins, S.

1978-01-01

The JPL energy consumption computer program developed as a useful tool in the on-going building modification studies in the DSN energy conservation project is described. The program simulates building heating and cooling loads and computes thermal and electric energy consumption and cost. The accuracy of computations are not sacrificed, however, since the results lie within + or - 10 percent margin compared to those read from energy meters. The program is carefully structured to reduce both user's time and running cost by asking minimum information from the user and reducing many internal time-consuming computational loops. Many unique features were added to handle two-level electronics control rooms not found in any other program.

Comparative cost-effectiveness of stereotactic body radiation therapy versus intensity-modulated and proton radiation therapy for localized prostate cancer.

Directory of Open Access Journals (Sweden)

Anju eParthan

2012-08-01

Full Text Available Objective. To determine the cost-effectiveness of several external beam radiation treatment modalities for the treatment of patients with localized prostate cancer.Methods. A lifetime Markov model incorporated the probabilities of experiencing treatment-related long-term toxicity or death. Toxicity probabilities were derived from published sources using meta-analytical techniques. Utilities and costs in the model were obtained from publically available secondary sources. The model calculated quality-adjusted life expectancy and expected lifetime cost per patient, and derived ratios of incremental cost per quality-adjusted life year (QALY gained between treatments. Analyses were conducted from both a payer and societal perspectives. One-way and probabilistic sensitivity analyses were performed.Results. Compared to intensity modulated radiation therapy (IMRT and proton beam therapy (PT, stereotactic body radiation therapy (SBRT was less costly and resulted in more QALYs. Sensitivity analyses showed that the conclusions in the base-case scenario were robust with respect to variations in toxicity and cost parameters consistent with available evidence. At a threshold of $50,000/QALY, SBRT was cost effective in 75%, and 94% of probabilistic simulations compared to IMRT and PT, respectively, from a payer perspective. From a societal perspective, SBRT was cost-effective in 75%, and 96% of simulations compared to IMRT and PT, respectively, at a threshold of $50,000/QALY. In threshold analyses, SBRT was less expensive with better outcomes compared to IMRT at toxicity rates 23% greater than the SBRT base-case rates. Conclusions. Based on the assumption that each treatment modality results in equivalent long-term efficacy, SBRT is a cost-effective strategy resulting in improved quality-adjusted survival compared to IMRT and PT for the treatment of localized prostate cancer.

Cost-effectiveness of nurse-delivered cognitive behavioural therapy (CBT) compared to supportive listening (SL) for adjustment to multiple sclerosis.

Science.gov (United States)

Mosweu, I; Moss-Morris, R; Dennison, L; Chalder, T; McCrone, P

2017-10-10

Cognitive Behavioural Therapy (CBT) reduces distress in multiple sclerosis, and helps manage adjustment, but cost-effectiveness evidence is lacking. An economic evaluation was conducted within a multi-centre trial. 94 patients were randomised to either eight sessions of nurse-led CBT or supportive listening (SL). Costs were calculated from the health, social and indirect care perspectives, and combined with additional quality-adjusted life years (QALY) or improvement on the GHQ-12 score, to explore cost-effectiveness at 12 months. CBT had higher mean health costs (£1610, 95% CI, -£187 to 3771) and slightly better QALYs (0.0053, 95% CI, -0.059 to 0.103) compared to SL but these differences were not statistically significant. This yielded £301,509 per QALY improvement, indicating that CBT is not cost-effective according to established UK NHS thresholds. The extra cost per patient improvement on the GHQ-12 scale was £821 from the same perspective. Using a £20,000, threshold, CBT in this format has a 9% probability of being cost effective. Although subgroup analysis of patients with clinical levels of distress at baseline showed an improvement in the position of CBT compared to SL, CBT was still not cost-effective. Nurse delivered CBT is more effective in reducing distress among MS patients compared to SL, but is highly unlikely to be cost-effective using a preference-based measure of health (EQ-5D). Results from a disease-specific measure (GHQ-12) produced comparatively lower Incremental Cost-Effectiveness Ratios, but there is currently no acceptable willingness-to-pay threshold for this measure to guide decision-making.

Cost effectiveness of denosumab compared with oral bisphosphonates in the treatment of post-menopausal osteoporotic women in Belgium.

Science.gov (United States)

Hiligsmann, Mickaël; Reginster, Jean-Yves

2011-10-01

Denosumab has recently been shown to be well tolerated, to increase bone mineral density (BMD) and to significantly reduce the risk of hip, vertebral and non-vertebral fractures in the FREEDOM (Fracture REduction Evaluation of Denosumab in Osteoporosis every 6 Months) trial. It is becoming increasingly important to evaluate not only the therapeutic value of a new drug but also the cost effectiveness compared with the most relevant treatment alternatives. The objective of this study was to estimate the cost effectiveness of denosumab compared with oral bisphosphonates (branded and generic drugs) in the treatment of post-menopausal osteoporotic women in Belgium. Cost effectiveness of 3 years of treatment with denosumab was compared with branded risedronate and branded and generic alendronate using an updated version of a previously validated Markov microsimulation model. The model was populated with relevant cost, adherence and epidemiological data for Belgium from a payer perspective and the results were presented as costs per QALY gained (&U20AC;, year 2009 values). Analyses were performed in populations (aged ≥60 years) in which osteoporosis medications are currently reimbursed in many European countries, i.e. those with BMD T-score of -2.5 or less or prevalent vertebral fracture. Patients receiving denosumab were assumed to have a 46% lower risk of discontinuation than those receiving oral bisphosphonates, and the effect of denosumab after treatment cessation was assumed to decline linearly to zero over a maximum of 1 year. Denosumab was cost effective compared with all other therapies, assuming a willingness to pay of &U20AC;40 000 per QALY gained. In particular, denosumab was found to be cost effective compared with branded alendronate and risedronate at a threshold value of &U20AC;30 000 per QALY and denosumab was dominant (i.e. lower cost and greater effectiveness) compared with risedronate from the age of 70 years in women with a T-score of -2.5 or

A cost-effectiveness analysis to illustrate the impact of cost definitions on results, interpretations and comparability of pharmacoeconomic studies in the US.

Science.gov (United States)

Tunis, Sandra L

2009-01-01

There is a lack of a uniform proxy for defining direct medical costs in the US. This potentially important source of variation in modelling and other types of economic studies is often overlooked. The extent to which increased expenditures for an intervention can be offset by reductions in subsequent service costs can be directly related to the choice of cost definitions. To demonstrate how different cost definitions for direct medical costs can impact results and interpretations of a cost-effectiveness analysis. The IMS-CORE Diabetes Model was used to project the lifetime (35-year) cost effectiveness in the US of one pharmacological intervention 'medication A' compared with a second 'medication B' (both unspecified) for type 2 diabetes mellitus. The complications modelled included cardiovascular disease, renal disease, eye disease and neuropathy. The model had a Markov structure with Monte Carlo simulations. Utility values were derived from the published literature. Complication costs were obtained from a retrospective database study that extracted anonymous patient-level data from (primarily private payer) adjudicated medical and pharmaceutical claims. Costs for pharmacy services, outpatient services and inpatient hospitalizations were included. Cost definitions for complications included charged, allowed and paid amounts, and for medications included both wholesale acquisition cost (WAC) and average wholesale price (AWP). Costs were reported in year 2007 values. The cost-effectiveness results differed according to the particular combination of cost definitions employed. The use of charges greatly increased costs for complications. When the analysis incorporated WAC medication prices with charged amounts for complication costs, the incremental cost-effectiveness ratio (ICER) for medication A versus medication B was $US6337 per QALY. When AWP prices were used with charged amounts, medication A became a dominant treatment strategy, i.e. lower costs with greater

Quantified measurement of brain blood volume: comparative evaluations between the single photon emission computer tomography and the positron computer tomography

International Nuclear Information System (INIS)

Bouvard, G.; Fernandez, Y.; Petit-Taboue, M.C.; Derlon, J.M.; Travere, J.M.; Le Poec, C.

1991-01-01

The quantified measurement of cerebral blood volume is interesting for the brain blood circulation studies. This measurement is often used in positron computed tomography. It's more difficult in single photon emission computed tomography: there are physical problems with the limited resolution of the detector, the Compton effect and the photon attenuation. The objectif of this study is to compare the results between these two techniques. The quantified measurement of brain blood volume is possible with the single photon emission computer tomogragry. However, there is a loss of contrast [fr

The Cost-Effectiveness of Conventional Discectomy Compared to Other Surgical Techniques for Lumbar Disk Herniation. A Systematic Review

DEFF Research Database (Denmark)

Thorsen, May Tone; Ødegaard-Olsen, Øystein; Leboeuf-Yde, Charlotte

2018-01-01

Background: The current study reviews the literature on the cost-effectiveness of conventional diskectomy compared to other surgical techniques, by assessing studies with economical evaluation and studies using proxy measures of cost-effectiveness. Methods: In April 2016, a comprehensive search w...... studies. The available evidence, however, suggests that any cost-effectiveness difference between conventional diskectomy and the alternatives is unlikely to be great.......Background: The current study reviews the literature on the cost-effectiveness of conventional diskectomy compared to other surgical techniques, by assessing studies with economical evaluation and studies using proxy measures of cost-effectiveness. Methods: In April 2016, a comprehensive search......-four articles were included in the review, 9 retrieved from the original search, and an additional 15 from reference lists. Four studies included an economical evaluation and 20 reported proxy measures of cost-effectiveness. The quality of studies varied considerably and results were ambiguous; the four...

COMPUTER SYSTEM FOR DETERMINATION OF COST DAILY SUGAR PRODUCTION AND INCIDENTS DECISIONS FOR COMPANIES SUGAR (SACODI

Directory of Open Access Journals (Sweden)

Alejandro Álvarez-Navarro

2016-01-01

Full Text Available The process of sugar production is complex; anything that affects this chain has direct repercussions in the sugar production’s costs, it’s synthetic and decisive indicator for the taking of decisions. Currently the Cuban sugar factory determine this cost weekly, for that, its process of taking of decisions is affected. Looking for solutions to this problem, the present work, being part of a territorial project approved by CITMA, intended to calculate the cost of production daily, weekly, monthly and accumulated until indicated date, according to an adaptation to the methodology used by the National Costs System of sugarcane created by the MINAZ, it’s supported by a computer system denominated SACODI. This adaptation registers the physical and economic indicators of all direct and indirect expenses of the  sugarcane and besides this information generates an economic-mathematical model of goal programming whose solution indicates the best balance in amount of sugar of the entities of the sugar factory, in short term. The implementation of the system in the sugar factory «Julio A. Mella» in Santiago de Cuba in the sugar-cane production 08-09 produced an estimate of decrease of the cost of until 3,5 % for the taking of better decisions. 

Self-study manual for introduction to computational fluid dynamics

OpenAIRE

Nabatov, Andrey

2017-01-01

Computational Fluid Dynamics (CFD) is the branch of Fluid Mechanics and Computational Physics that plays a decent role in modern Mechanical Engineering Design process due to such advantages as relatively low cost of simulation comparing with conduction of real experiment, an opportunity to easily correct the design of a prototype prior to manufacturing of the final product and a wide range of application: mixing, acoustics, cooling and aerodynamics. This makes CFD particularly and Computation...

Value-based medicine, comparative effectiveness, and cost-effectiveness analysis of topical cyclosporine for the treatment of dry eye syndrome.

Science.gov (United States)

Brown, Melissa M; Brown, Gary C; Brown, Heidi C; Peet, Jonathan; Roth, Zachary

2009-02-01

To assess the comparative effectiveness and cost-effectiveness (cost-utility) of a 0.05% emulsion of topical cyclosporine (Restasis; Allergan Inc, Irvine, California) for the treatment of moderate to severe dry eye syndrome that is unresponsive to conventional therapy. Data from 2 multicenter, randomized, clinical trials and Food and Drug Administration files for topical cyclosporine, 0.05%, emulsion were used in Center for Value-Based Medicine analyses. Analyses included value-based medicine as a comparative effectiveness analysis and average cost-utility analysis using societal and third-party insurer cost perspectives. Outcome measures of comparative effectiveness were quality-adjusted life-year (QALY) gain and percentage of improvement in quality of life, and for cost-effectiveness were cost-utility ratio (CUR) using dollars per QALY. Topical cyclosporine, 0.05%, confers a value gain (comparative effectiveness) of 0.0319 QALY per year compared with topical lubricant therapy, a 4.3% improvement in quality of life for the average patient with moderate to severe dry eye syndrome that is unresponsive to conventional lubricant therapy. The societal perspective incremental CUR for cyclosporine over vehicle therapy is $34,953 per QALY and the societal perspective average CUR is $11,199 per QALY. The third-party-insurer incremental CUR is $37,179 per QALY, while the third-party-insurer perspective average CUR is $34,343 per QALY. Topical cyclosporine emulsion, 0.05%, confers considerable patient value and is a cost-effective therapy for moderate to severe dry eye syndrome that is unresponsive to conventional therapy.

Computer performance evaluation of FACOM 230-75 computer system, (2)

International Nuclear Information System (INIS)

Fujii, Minoru; Asai, Kiyoshi

1980-08-01

In this report are described computer performance evaluations for FACOM230-75 computers in JAERI. The evaluations are performed on following items: (1) Cost/benefit analysis of timesharing terminals, (2) Analysis of the response time of timesharing terminals, (3) Analysis of throughout time for batch job processing, (4) Estimation of current potential demands for computer time, (5) Determination of appropriate number of card readers and line printers. These evaluations are done mainly from the standpoint of cost reduction of computing facilities. The techniques adapted are very practical ones. This report will be useful for those people who are concerned with the management of computing installation. (author)

Cost minimization of generation, storage, and new loads, comparing costs with and without externalities

International Nuclear Information System (INIS)

Noel, Lance; Brodie, Joseph F.; Kempton, Willett; Archer, Cristina L.; Budischak, Cory

2017-01-01

Highlights: • The study models a large regional transmission organization, with various amounts of renewable energy. • The cost of 86 million iterations of energy systems is calculated, with and without externalities. • When including externalities, society should implement 50% renewable energy. - Abstract: The goal of this research is to understand the economics of anticipated large-scale changes in the electric system. 86 million different combinations of renewable generation (wind and solar), natural gas, and three storage types (hydrogen storage, electric vehicles equipped with vehicle-to-grid (V2G) technology, and building heat) are modeled within the PJM Interconnection. The corresponding electric systems are then operated and constrained to meet the load every hour over four years. The total cost of each energy system is calculated, both with and without externalities, to find the least cost energy systems. Using today’s costs of conventional and renewable electricity and without adding any externalities, the cost-minimum system includes no renewable generation, but does include EVs. When externalities are included, however, the most cost-effective to system covers 50% of the electric load with renewable energy and runs reliably without need for either new conventional generation or purpose-built storage. The three novel energy policy implications of this research are: (1) using today’s cost of renewable electricity and estimates of externalities, it is cost effective to implement 240 GW of renewable electricity to meet 50% of the total electric load; (2) there is limited need to construct new natural gas power plants, especially from a system-wide perspective; and (3) existing coal plants may still be useful to the energy system, and instead of being retired, should be repurposed to occasionally provide generation.

Costs and effects of paliperidone extended release compared with alternative oral antipsychotic agents in patients with schizophrenia in Greece: a cost effectiveness study.

Science.gov (United States)

Geitona, Maria; Kousoulakou, Hara; Ollandezos, Markos; Athanasakis, Kostas; Papanicolaou, Sotiria; Kyriopoulos, Ioannis

2008-08-28

To compare the costs and effects of paliperidone extended release (ER), a new pharmaceutical treatment for the management of schizophrenia, with the most frequently prescribed oral treatments in Greece (namely risperidone, olanzapine, quetiapine, aripiprazole and ziprasidone) over a 1-year time period. A decision tree was developed and tailored to the specific circumstances of the Greek healthcare system. Therapeutic effectiveness was defined as the annual number of stable days and the clinical data was collected from international clinical trials and published sources. The study population was patients who suffer from schizophrenia with acute exacerbation. During a consensus panel of 10 psychiatrists and 6 health economists, data were collected on the clinical practice and medical resource utilisation. Unit costs were derived from public sources and official reimbursement tariffs. For the comparators official retail prices were used. Since a price had not yet been granted for paliperidone ER at the time of the study, the conservative assumption of including the average of the highest targeted European prices was used, overestimating the price of paliperidone ER in Greece. The study was conducted from the perspective of the National Healthcare System. The data indicate that paliperidone ER might offer an increased number of stable days (272.5 compared to 272.2 for olanzapine, 265.5 f risperidone, 260.7 for quetiapine, 260.5 for ziprasidone and 258.6 for aripiprazole) with a lower cost compared to the other therapies examined (euro 7,030 compared to euro 7,034 for olanzapine, euro 7,082 for risperidone, euro 8,321 for quetiapine, euro 7,713 for ziprasidone and euro 7,807 for aripiprazole). During the sensitivity analysis, a +/- 10% change in the duration and frequency of relapses and the economic parameters did not lead to significant changes in the results. Treatment with paliperidone ER can lead to lower total cost and higher number of stable days in most of the

Costs and effects of paliperidone extended release compared with alternative oral antipsychotic agents in patients with schizophrenia in Greece: A cost effectiveness study

Directory of Open Access Journals (Sweden)

Papanicolaou Sotiria

2008-08-01

Full Text Available Abstract Background To compare the costs and effects of paliperidone extended release (ER, a new pharmaceutical treatment for the management of schizophrenia, with the most frequently prescribed oral treatments in Greece (namely risperidone, olanzapine, quetiapine, aripiprazole and ziprasidone over a 1-year time period. Methods A decision tree was developed and tailored to the specific circumstances of the Greek healthcare system. Therapeutic effectiveness was defined as the annual number of stable days and the clinical data was collected from international clinical trials and published sources. The study population was patients who suffer from schizophrenia with acute exacerbation. During a consensus panel of 10 psychiatrists and 6 health economists, data were collected on the clinical practice and medical resource utilisation. Unit costs were derived from public sources and official reimbursement tariffs. For the comparators official retail prices were used. Since a price had not yet been granted for paliperidone ER at the time of the study, the conservative assumption of including the average of the highest targeted European prices was used, overestimating the price of paliperidone ER in Greece. The study was conducted from the perspective of the National Healthcare System. Results The data indicate that paliperidone ER might offer an increased number of stable days (272.5 compared to 272.2 for olanzapine, 265.5 f risperidone, 260.7 for quetiapine, 260.5 for ziprasidone and 258.6 for aripiprazole with a lower cost compared to the other therapies examined (€7,030 compared to €7,034 for olanzapine, €7,082 for risperidone, €8,321 for quetiapine, €7,713 for ziprasidone and €7,807 for aripiprazole. During the sensitivity analysis, a ± 10% change in the duration and frequency of relapses and the economic parameters did not lead to significant changes in the results. Conclusion Treatment with paliperidone ER can lead to lower total cost

Cost of wind energy: comparing distant wind resources to local resources in the midwestern United States.

Science.gov (United States)

Hoppock, David C; Patiño-Echeverri, Dalia

2010-11-15

The best wind sites in the United States are often located far from electricity demand centers and lack transmission access. Local sites that have lower quality wind resources but do not require as much power transmission capacity are an alternative to distant wind resources. In this paper, we explore the trade-offs between developing new wind generation at local sites and installing wind farms at remote sites. We first examine the general relationship between the high capital costs required for local wind development and the relatively lower capital costs required to install a wind farm capable of generating the same electrical output at a remote site,with the results representing the maximum amount an investor should be willing to pay for transmission access. We suggest that this analysis can be used as a first step in comparing potential wind resources to meet a state renewable portfolio standard (RPS). To illustrate, we compare the cost of local wind (∼50 km from the load) to the cost of distant wind requiring new transmission (∼550-750 km from the load) to meet the Illinois RPS. We find that local, lower capacity factor wind sites are the lowest cost option for meeting the Illinois RPS if new long distance transmission is required to access distant, higher capacity factor wind resources. If higher capacity wind sites can be connected to the existing grid at minimal cost, in many cases they will have lower costs.

Costs of fire suppression forces based on cost-aggregation approach

Science.gov (United States)

Gonz& aacute; lez-Cab& aacute; Armando n; Charles W. McKetta; Thomas J. Mills

1984-01-01

A cost-aggregation approach has been developed for determining the cost of Fire Management Inputs (FMls)-the direct fireline production units (personnel and equipment) used in initial attack and large-fire suppression activities. All components contributing to an FMI are identified, computed, and summed to estimate hourly costs. This approach can be applied to any FMI...

[Cost-effectiveness analysis of etanercept compared with other biologic therapies in the treatment of rheumatoid arthritis].

Science.gov (United States)

Salinas-Escudero, Guillermo; Vargas-Valencia, Juan; García-García, Erika Gabriela; Munciño-Ortega, Emilio; Galindo-Suárez, Rosa María

2013-01-01

to conduct cost-effectiveness analysis of etanercept compared with other biologic therapies in the treatment of moderate or severe rheumatoid arthritis in patients with previous unresponse to immune selective anti-inflammatory derivatives failure. a pharmacoeconomic model based on decision analysis to assess the clinical outcome after giving etanercept, infliximab, adalimumab or tocilizumab to treat moderate or severe rheumatoid arthritis was employed. Effectiveness of medications was assessed with improvement rates of 20 % or 70 % of the parameters established by the American College of Rheumatology (ACR 20 and ACR 70). the model showed that etanercept had the most effective therapeutic response rate: 79.7 % for ACR 20 and 31.4 % for ACR 70, compared with the response to other treatments. Also, etanercept had the lowest cost ($149,629.10 per patient) and had the most cost-effective average ($187,740.40 for clinical success for ACR 20 and $476,525.80 for clinical success for ACR 70) than the other biologic therapies. we demonstrated that treatment with etanercept is more effective and less expensive compared to the other drugs, thus making it more efficient therapeutic option both in terms of means and incremental cost-effectiveness ratios for the treatment of rheumatoid arthritis.

Comparing Usage and Cost- Effectiveness Analysis of English Printed and Electronic Books for University of Tehran

OpenAIRE

Davoud Haseli; Nader Naghshineh; fatemeh Fahimnia

2014-01-01

Libraries operate in a competitive environment, and this is essentially needed to prove its benefits for stockholders, and continuously evaluate and compare advantages for printed and electronic resources. In these cases, economic evaluation methods such as cost- effectiveness analysis, is one of the best methods, because of a comprehensive study of the use and cost of library sources. The purpose of this study is to discovery of use and cost- effectiveness analysis of English printed and ebo...

Color doppler findings of gastric varices compared with findings on computed tomography

Energy Technology Data Exchange (ETDEWEB)

Sato, Takahiro; Yamazaki, Katsu; Toyota, Jouji; Karino, Yoshiyasu; Ohmura, Takumi; Suga, Toshihiro [Sapporo Kosei General Hospital (Japan)

2002-08-01

The aim of this study was to evaluate the hemodynamics of gastric varices. We evaluated the detection rates of gastric varices, inflowing vessels to gastric varices, and outflowing vessels from gastric varices in 24 patients with gastric varices, using color Doppler sonography, and compared these findings with computed tomography findings. Eighteen patients had F2-type varices and 6 had F3-type, classified according to the Japanese Research Society for Portal Hypertension. Fourteen patients had fundal varices, and 10 had cardiac and fundal varices. The detection rates of collateral veins using color Doppler sonography were as follows: gastric varices were detected in all 24 patients (100%); inflowing vessels, in 21 of the 24 patients (87.5%); and outflowing vessels, in 18 of the 24 patients (75.0%). The detection rates of collateral veins, using computed tomography, were: gastric varices were detected in all 24 patients (100%); inflowing vessels, in all 24 patients (100%); and outflowing vessles, in 21 of the 24 patients (87.5%). The color Doppler findings agreed perfectly with the computed tomography findings in 13 of the 24 patients (54.2%). Although color Doppler sonography is a useful, noninvasive modality for evaluating the hemodynamics of gastric varices, it falls short in visualizing the detailed hemodynamics of the inflowing and outflowing vessels of gastric varices in half of the patients when compared with computed tomography. (author)

Data Mining Based on Cloud-Computing Technology

Directory of Open Access Journals (Sweden)

Ren Ying

2016-01-01

Full Text Available There are performance bottlenecks and scalability problems when traditional data-mining system is used in cloud computing. In this paper, we present a data-mining platform based on cloud computing. Compared with a traditional data mining system, this platform is highly scalable, has massive data processing capacities, is service-oriented, and has low hardware cost. This platform can support the design and applications of a wide range of distributed data-mining systems.

Emergency planning. Can the cost of remedial actions be compared to the value of the health effects they save

International Nuclear Information System (INIS)

Frittelli, L.; Tamburrano, A.

1981-01-01

When an accidental release of radioactive material occurs the exposure of the people concerned can be reduced only by remedial actions, applied to individuals (evacuation) or their environment (e.g. by land interdiction, by impoundment of contaminated products). The adoption of remedial actions should be based on a balance between the damage they cause and the reduction in health effects they can achieve. In this paper a 'cost-effectiveness' analysis is attempted by comparing the costs of remedial actions with the monetary value of the collective dose avoided by them. Remedial actions are undertaken to prevent non-stochastic effects in the exposed population and to limit stochastic effects therein. The damage caused by the remedial actions is evaluated by taking into account the loss of value of interdicted property, the costs for decontaminating land and structures, the loss of income of evacuated people. The options in remedial actions (interdiction, decontamination, goods removal) which minimize the total costs are supposed to be adopted at every location. The collective effective dose equivalent avoided by the remedial actions is computed by taking into account the external exposure from the cloud and from the contaminated ground, and the internal exposure from material inhaled from the passing cloud or inhaled from matter resuspended after deposition on the ground. The extent of the resulting total damage (both economic and health aspects) is partly determined by the intervention level chosen for defining the time and space features of remedial actions. As a result, the total damage has a lower value for an intervention level of about 0.1 Sv for large and medium releases from a nuclear power plant in a not very highly developed site. For a contained release no value of the intervention level optimizes the balance between health and economic consequences. (author)

MULTI TENANCY SECURITY IN CLOUD COMPUTING

OpenAIRE

Manjinder Singh*, Charanjit Singh

2017-01-01

The word Cloud is used as a metaphor for the internet, based on standardised use of a cloud like shape to denote a network. Cloud Computing is advanced technology for resource sharing through network with less cost as compare to other technologies. Cloud infrastructure supports various models IAAS, SAAS, PAAS. The term virtualization in cloud computing is very useful today. With the help of virtualization, more than one operating system is supported with all resources on single H/W. We can al...

Using Amazon's Elastic Compute Cloud to dynamically scale CMS computational resources

International Nuclear Information System (INIS)

Evans, D; Fisk, I; Holzman, B; Pordes, R; Tiradani, A; Melo, A; Sheldon, P; Metson, S

2011-01-01

Large international scientific collaborations such as the Compact Muon Solenoid (CMS) experiment at the Large Hadron Collider have traditionally addressed their data reduction and analysis needs by building and maintaining dedicated computational infrastructure. Emerging cloud computing services such as Amazon's Elastic Compute Cloud (EC2) offer short-term CPU and storage resources with costs based on usage. These services allow experiments to purchase computing resources as needed, without significant prior planning and without long term investments in facilities and their management. We have demonstrated that services such as EC2 can successfully be integrated into the production-computing model of CMS, and find that they work very well as worker nodes. The cost-structure and transient nature of EC2 services makes them inappropriate for some CMS production services and functions. We also found that the resources are not truely 'on-demand' as limits and caps on usage are imposed. Our trial workflows allow us to make a cost comparison between EC2 resources and dedicated CMS resources at a University, and conclude that it is most cost effective to purchase dedicated resources for the 'base-line' needs of experiments such as CMS. However, if the ability to use cloud computing resources is built into an experiment's software framework before demand requires their use, cloud computing resources make sense for bursting during times when spikes in usage are required.

System matrix computation vs storage on GPU: A comparative study in cone beam CT.

Science.gov (United States)

Matenine, Dmitri; Côté, Geoffroi; Mascolo-Fortin, Julia; Goussard, Yves; Després, Philippe

2018-02-01

Iterative reconstruction algorithms in computed tomography (CT) require a fast method for computing the intersection distances between the trajectories of photons and the object, also called ray tracing or system matrix computation. This work focused on the thin-ray model is aimed at comparing different system matrix handling strategies using graphical processing units (GPUs). In this work, the system matrix is modeled by thin rays intersecting a regular grid of box-shaped voxels, known to be an accurate representation of the forward projection operator in CT. However, an uncompressed system matrix exceeds the random access memory (RAM) capacities of typical computers by one order of magnitude or more. Considering the RAM limitations of GPU hardware, several system matrix handling methods were compared: full storage of a compressed system matrix, on-the-fly computation of its coefficients, and partial storage of the system matrix with partial on-the-fly computation. These methods were tested on geometries mimicking a cone beam CT (CBCT) acquisition of a human head. Execution times of three routines of interest were compared: forward projection, backprojection, and ordered-subsets convex (OSC) iteration. A fully stored system matrix yielded the shortest backprojection and OSC iteration times, with a 1.52× acceleration for OSC when compared to the on-the-fly approach. Nevertheless, the maximum problem size was bound by the available GPU RAM and geometrical symmetries. On-the-fly coefficient computation did not require symmetries and was shown to be the fastest for forward projection. It also offered reasonable execution times of about 176.4 ms per view per OSC iteration for a detector of 512 × 448 pixels and a volume of 384 3 voxels, using commodity GPU hardware. Partial system matrix storage has shown a performance similar to the on-the-fly approach, while still relying on symmetries. Partial system matrix storage was shown to yield the lowest relative

Comparative study of cost models for tokamak DEMO fusion reactors

International Nuclear Information System (INIS)

Oishi, Tetsutarou; Yamazaki, Kozo; Arimoto, Hideki; Ban, Kanae; Kondo, Takuya; Tobita, Kenji; Goto, Takuya

2012-01-01

Cost evaluation analysis of the tokamak-type demonstration reactor DEMO using the PEC (physics-engineering-cost) system code is underway to establish a cost evaluation model for the DEMO reactor design. As a reference case, a DEMO reactor with reference to the SSTR (steady state tokamak reactor) was designed using PEC code. The calculated total capital cost was in the same order of that proposed previously in cost evaluation studies for the SSTR. Design parameter scanning analysis and multi regression analysis illustrated the effect of parameters on the total capital cost. The capital cost was predicted to be inside the range of several thousands of M$s in this study. (author)

Scaling predictive modeling in drug development with cloud computing.

Science.gov (United States)

Moghadam, Behrooz Torabi; Alvarsson, Jonathan; Holm, Marcus; Eklund, Martin; Carlsson, Lars; Spjuth, Ola

2015-01-26

Growing data sets with increased time for analysis is hampering predictive modeling in drug discovery. Model building can be carried out on high-performance computer clusters, but these can be expensive to purchase and maintain. We have evaluated ligand-based modeling on cloud computing resources where computations are parallelized and run on the Amazon Elastic Cloud. We trained models on open data sets of varying sizes for the end points logP and Ames mutagenicity and compare with model building parallelized on a traditional high-performance computing cluster. We show that while high-performance computing results in faster model building, the use of cloud computing resources is feasible for large data sets and scales well within cloud instances. An additional advantage of cloud computing is that the costs of predictive models can be easily quantified, and a choice can be made between speed and economy. The easy access to computational resources with no up-front investments makes cloud computing an attractive alternative for scientists, especially for those without access to a supercomputer, and our study shows that it enables cost-efficient modeling of large data sets on demand within reasonable time.

Cost-effectiveness of Low-dose Submicron Diclofenac Compared With Generic Diclofenac.

Science.gov (United States)

Mladsi, Deirdre; Ronquest, Naoko; Odom, Dawn; Miles, LaStella; Saag, Kenneth

2016-11-01

NSAIDs are commonly prescribed for the treatment of pain and inflammation. Despite the effectiveness of NSAIDs, concerns exist regarding their tolerability. Worldwide health authorities, including the European Medicines Agency, Health Canada, and the US Food and Drug Administration, have advised that NSAIDs be prescribed at the lowest effective dosage and for the shortest duration. Effective lowering of NSAID dosage without compromising pain relief has been demonstrated in randomized, controlled trials of the recently approved NSAID lower-dose submicron diclofenac. Building on previously published work from an independently published systematic review and meta-analysis, a linear dose-toxicity relationship between diclofenac dose and serious gastrointestinal (GI) events was recently demonstrated, indicating that reductions in adverse events (AEs) may be seen even with modest dose reductions in many patients. The objective of the present study was to estimate the potential reduction in risk for NSAID dose-related AEs, corresponding savings in health care costs, and the incremental cost-effectiveness of submicron diclofenac compared with generic diclofenac in the United States. Our decision-analytic cost-effectiveness model considered a subset of potential AEs that may be avoided by lowering NSAID dosage. To estimate the expected reductions in upper GI bleeding/perforation and major cardiovascular events with submicron diclofenac, our model used prediction equations estimated by meta-regressions using data from systematic literature reviews. Utilities, lifetime costs, and health outcomes associated with AEs were estimated using data from the literature. The face validity of the model structure and inputs was confirmed by clinical experts in the United States. Results were evaluated in 1-way and probabilistic sensitivity analyses. The model predicted that submicron diclofenac versus generic diclofenac could reduce the occurrence of modeled GI events (by 18

Comparative study of scintigraphy, ultrasonography and computed tomography in the evaluation of liver tumours

International Nuclear Information System (INIS)

Tohyama, Junko; Ishigaki, Takeo; Ishikawa, Tsutomu

1982-01-01

A comparative study of scintigraphy, ultrasonography and computed tomography in 67 proven patients with clinically suspected liver tumours was reported. Scintigraphy was superior in sensitivity to ultrasonography and computed tomography. However, in specificity, scintigraphy was inferior to other two. Diagnostic efficacy of ultrasonography and computed tomography in detecting focal masses of the liver was not greatly different, and simultaneous interpretation of ultrasonogram and computed tomogram was more helpful than independent interpretation. So they were thought to be complementary. In conclusion, scintigraphy was thought to be the initial procedure in the diagnostic approach for focal liver masses and ultrasonography was second procedure because of no radiation hazards. And computed tomography should follow then. (author)

The cost-effectiveness of rotavirus vaccination: Comparative analyses for five European countries and transferability in Europe.

Science.gov (United States)

Jit, Mark; Bilcke, Joke; Mangen, Marie-Josée J; Salo, Heini; Melliez, Hugues; Edmunds, W John; Yazdan, Yazdanpanah; Beutels, Philippe

2009-10-19

Cost-effectiveness analyses are usually not directly comparable between countries because of differences in analytical and modelling assumptions. We investigated the cost-effectiveness of rotavirus vaccination in five European Union countries (Belgium, England and Wales, Finland, France and the Netherlands) using a single model, burden of disease estimates supplied by national public health agencies and a subset of common assumptions. Under base case assumptions (vaccination with Rotarix, 3% discount rate, health care provider perspective, no herd immunity and quality of life of one caregiver affected by a rotavirus episode) and a cost-effectiveness threshold of euro30,000, vaccination is likely to be cost effective in Finland only. However, single changes to assumptions may make it cost effective in Belgium and the Netherlands. The estimated threshold price per dose for Rotarix (excluding administration costs) to be cost effective was euro41 in Belgium, euro28 in England and Wales, euro51 in Finland, euro36 in France and euro46 in the Netherlands.

Reduced computational cost in the calculation of worst case response time for real time systems

OpenAIRE

Urriza, José M.; Schorb, Lucas; Orozco, Javier D.; Cayssials, Ricardo

2009-01-01

Modern Real Time Operating Systems require reducing computational costs even though the microprocessors become more powerful each day. It is usual that Real Time Operating Systems for embedded systems have advance features to administrate the resources of the applications that they support. In order to guarantee either the schedulability of the system or the schedulability of a new task in a dynamic Real Time System, it is necessary to know the Worst Case Response Time of the Real Time tasks ...

Comparative Analysis of Direct Hospital Care Costs between Aseptic and Two-Stage Septic Knee Revision

Science.gov (United States)

Kasch, Richard; Merk, Sebastian; Assmann, Grit; Lahm, Andreas; Napp, Matthias; Merk, Harry; Flessa, Steffen

2017-01-01

Background The most common intermediate and long-term complications of total knee arthroplasty (TKA) include aseptic and septic failure of prosthetic joints. These complications cause suffering, and their management is expensive. In the future the number of revision TKA will increase, which involves a greater financial burden. Little concrete data about direct costs for aseptic and two-stage septic knee revisions with an in depth-analysis of septic explantation and implantation is available. Questions/Purposes A retrospective consecutive analysis of the major partial costs involved in revision TKA for aseptic and septic failure was undertaken to compare 1) demographic and clinical characteristics, and 2) variable direct costs (from a hospital department’s perspective) between patients who underwent single-stage aseptic and two-stage septic revision of TKA in a hospital providing maximum care. We separately analyze the explantation and implantation procedures in septic revision cases and identify the major cost drivers of knee revision operations. Methods A total of 106 consecutive patients (71 aseptic and 35 septic) was included. All direct costs of diagnosis, surgery, and treatment from the hospital department’s perspective were calculated as real purchase prices. Personnel involvement was calculated in units of minutes. Results Aseptic versus septic revisions differed significantly in terms of length of hospital stay (15.2 vs. 39.9 days), number of reported secondary diagnoses (6.3 vs. 9.8) and incision-suture time (108.3 min vs. 193.2 min). The management of septic revision TKA was significantly more expensive than that of aseptic failure ($12,223.79 vs. $6,749.43) (p costs of explantation stage ($4,540.46) were lower than aseptic revision TKA ($6,749.43) which were again lower than those of the septic implantation stage ($7,683.33). All mean costs of stays were not comparable as they differ significantly (p cost drivers were the cost of the implant and

Comparability of Computer-based and Paper-based Versions of Writing Section of PET in Iranian EFL Context

Directory of Open Access Journals (Sweden)

Mohammad Mohammadi

2010-11-01

Full Text Available Computer technology has provided language testing experts with opportunity to develop computerized versions of traditional paper-based language tests. New generations of TOEFL and Cambridge IELTS, BULATS, KET, PET are good examples of computer-based language tests. Since this new method of testing introduces new factors into the realm of language assessment ( e.g. modes of test delivery, familiarity with computer, etc.,the question may be whether the two modes of computer- and paper-based tests comparably measure the same construct, and hence, the scores obtained from the two modes can be used interchangeably. Accordingly, the present study aimed to investigate the comparability of the paper- and computer-based versions of a writing test. The data for this study were collected from administering the writing section of a Cambridge Preliminary English Test (PET to eighty Iranian intermediate EFL learners through the two modes of computer- and paper-based testing. Besides, a computer familiarity questionnaire was used to divide participants into two groups with high and low computer familiarity. The results of the independent samples t-test revealed that there was no statistically significant difference between the learners' computer- and paper-based writing scores. The results of the paired samples t-test showed no statistically significant difference between high- and low-computer-familiar groups on computer-based writing. The researchers concluded that the two modes comparably measured the same construct.

Computer architecture fundamentals and principles of computer design

CERN Document Server

Dumas II, Joseph D

2005-01-01

Introduction to Computer ArchitectureWhat is Computer Architecture?Architecture vs. ImplementationBrief History of Computer SystemsThe First GenerationThe Second GenerationThe Third GenerationThe Fourth GenerationModern Computers - The Fifth GenerationTypes of Computer SystemsSingle Processor SystemsParallel Processing SystemsSpecial ArchitecturesQuality of Computer SystemsGenerality and ApplicabilityEase of UseExpandabilityCompatibilityReliabilitySuccess and Failure of Computer Architectures and ImplementationsQuality and the Perception of QualityCost IssuesArchitectural Openness, Market Timi

Influence of the discount rate when comparing costs of different nuclear fuel cycles

International Nuclear Information System (INIS)

Le Dars, A.; Loaec, Ch.

2007-01-01

The article describes the methodology and technical economic results obtained by Cea in the DERECO project. This project was aimed at evaluating ground-breaking and intricate scenarios of the nuclear fuel cycle, and developed on the long term (150 years), in the context of France. All 5 scenarios studied assume that the reliance on nuclear energy will continue in order to satisfy the electricity demand. Despite uncertainties, the trends are breaking free from the analysis. It appears that the scenarios in which fourth generation fast reactors take part are globally more economical than the keeping to the present strategy of plutonium mono-recycling in PWR. The scenario in which fuel reprocessing is stopped has a total cost concerning the fuel cycle similar to that of the present strategy but the disposal cost is twice as high because of the necessity of disposing spent fuels directly in geological formations. The comparative costs of the different scenarios are set out and the influence of the discount rate is highlighted. One must keep in mind that the actualization theory entails a diminishing value for long term costs due to an unavoidable mechanical effect of the discount rate

Cost-minimization analysis of antimicrobial therapy in a tertiary ...

African Journals Online (AJOL)

The mean cost per defined daily dosage (DDD) of generic and branded for each antibacterial was computed. These were compared using Student's t-test. The outcome measure was potential eradication of bacterial in question by the respective antibacterial drug. The analyses showed that the use of expensive branded ...

Cost-Effectiveness Analysis of Unsafe Abortion and Alternative First ...

African Journals Online (AJOL)

To explore the policy implications of increasing access to safe abortion in Nigeria and Ghana, we developed a computer-based decision analytic model which simulates induced abortion and its potential complications in a cohort of women, and comparatively assessed the cost-effectiveness of unsafe abortion and three ...

Comparing the Cost of Protecting Selected Lightweight Block Ciphers against Differential Power Analysis in Low-Cost FPGAs

Directory of Open Access Journals (Sweden)

William Diehl

2018-04-01

Full Text Available Lightweight block ciphers are an important topic in the Internet of Things (IoT since they provide moderate security while requiring fewer resources than the Advanced Encryption Standard (AES. Ongoing cryptographic contests and standardization efforts evaluate lightweight block ciphers on their resistance to power analysis side channel attack (SCA, and the ability to apply countermeasures. While some ciphers have been individually evaluated, a large-scale comparison of resistance to side channel attack and the formulation of absolute and relative costs of implementing countermeasures is difficult, since researchers typically use varied architectures, optimization strategies, technologies, and evaluation techniques. In this research, we leverage the Test Vector Leakage Assessment (TVLA methodology and the FOBOS SCA framework to compare FPGA implementations of AES, SIMON, SPECK, PRESENT, LED, and TWINE, using a choice of architecture targeted to optimize throughput-to-area (TP/A ratio and suitable for introducing countermeasures to Differential Power Analysis (DPA. We then apply an equivalent level of protection to the above ciphers using 3-share threshold implementations (TI and verify the improved resistance to DPA. We find that SIMON has the highest absolute TP/A ratio of protected versions, as well as the lowest relative cost of protection in terms of TP/A ratio. Additionally, PRESENT uses the least energy per bit (E/bit of all protected implementations, while AES has the lowest relative cost of protection in terms of increased E/bit.

Comparative Study on Electric Generation Cost of HTR with Another Electric Plant Using LEGECOST Program

International Nuclear Information System (INIS)

Mochamad-Nasrullah; Soetrisnanto, Arnold Y.; Tosi-Prastiadi; Adiwardojo

2000-01-01

Monetary and economic crisis in Indonesia resulted in impact of electricity and demand and supply planning that it has to be reevaluated. One of the reasons is budget limitation of the government as well as private companies. Considering this reason, the economic calculation for all of aspect could be performed, especially the calculation of electric generation cost. This paper will discuss the economic aspect of several power plants using fossil and nuclear fuel including High Temperature Reactor (HTR). Using Levelized Generation Cost (LEGECOST) program developed by IAEA (International Atomic Energy Agency), the electric generation cost of each power plant could be calculated. And then, the sensitivity analysis has to be done using several economic parameters and scenarios, in order to be known the factors that influence the electric generation cost. It could be concluded, that the electric generation cost of HTR is cheapest comparing the other power plants including nuclear conventional. (author)

Depression in working adults: comparing the costs and health outcomes of working when ill.

Directory of Open Access Journals (Sweden)

Fiona Cocker

Full Text Available Working through a depressive illness can improve mental health but also carries risks and costs from reduced concentration, fatigue, and poor on-the-job performance. However, evidence-based recommendations for managing work attendance decisions, which benefit individuals and employers, are lacking. Therefore, this study has compared the costs and health outcomes of short-term absenteeism versus working while ill ("presenteeism" amongst employed Australians reporting lifetime major depression.Cohort simulation using state-transition Markov models simulated movement of a hypothetical cohort of workers, reporting lifetime major depression, between health states over one- and five-years according to probabilities derived from a quality epidemiological data source and existing clinical literature. Model outcomes were health service and employment-related costs, and quality-adjusted-life-years (QALYs, captured for absenteeism relative to presenteeism, and stratified by occupation (blue versus white-collar.Per employee with depression, absenteeism produced higher mean costs than presenteeism over one- and five-years ($42,573/5-years for absenteeism, $37,791/5-years for presenteeism. However, overlapping confidence intervals rendered differences non-significant. Employment-related costs (lost productive time, job turnover, and antidepressant medication and service use costs of absenteeism and presenteeism were significantly higher for white-collar workers. Health outcomes differed for absenteeism versus presenteeism amongst white-collar workers only.Costs and health outcomes for absenteeism and presenteeism were not significantly different; service use costs excepted. Significant variation by occupation type was identified. These findings provide the first occupation-specific cost evidence which can be used by clinicians, employees, and employers to review their management of depression-related work attendance, and may suggest encouraging employees to

Depression in working adults: comparing the costs and health outcomes of working when ill.

Science.gov (United States)

Cocker, Fiona; Nicholson, Jan M; Graves, Nicholas; Oldenburg, Brian; Palmer, Andrew J; Martin, Angela; Scott, Jenn; Venn, Alison; Sanderson, Kristy

2014-01-01

Working through a depressive illness can improve mental health but also carries risks and costs from reduced concentration, fatigue, and poor on-the-job performance. However, evidence-based recommendations for managing work attendance decisions, which benefit individuals and employers, are lacking. Therefore, this study has compared the costs and health outcomes of short-term absenteeism versus working while ill ("presenteeism") amongst employed Australians reporting lifetime major depression. Cohort simulation using state-transition Markov models simulated movement of a hypothetical cohort of workers, reporting lifetime major depression, between health states over one- and five-years according to probabilities derived from a quality epidemiological data source and existing clinical literature. Model outcomes were health service and employment-related costs, and quality-adjusted-life-years (QALYs), captured for absenteeism relative to presenteeism, and stratified by occupation (blue versus white-collar). Per employee with depression, absenteeism produced higher mean costs than presenteeism over one- and five-years ($42,573/5-years for absenteeism, $37,791/5-years for presenteeism). However, overlapping confidence intervals rendered differences non-significant. Employment-related costs (lost productive time, job turnover), and antidepressant medication and service use costs of absenteeism and presenteeism were significantly higher for white-collar workers. Health outcomes differed for absenteeism versus presenteeism amongst white-collar workers only. Costs and health outcomes for absenteeism and presenteeism were not significantly different; service use costs excepted. Significant variation by occupation type was identified. These findings provide the first occupation-specific cost evidence which can be used by clinicians, employees, and employers to review their management of depression-related work attendance, and may suggest encouraging employees to continue

Comparative study on the performance of Pod type waterjet by experiment and computation

Directory of Open Access Journals (Sweden)

Moon-Chan Kim

2010-03-01

Full Text Available A comparative study between a computation and an experiment has been conducted to predict the performance of a Pod type waterjet for an amphibious wheeled vehicle. The Pod type waterjet has been chosen on the basis of the required specific speed of more than 2500. As the Pod type waterjet is an extreme type of axial flow type waterjet, theoretical as well as experimental works about Pod type waterjets are very rare. The main purpose of the present study is to validate and compare to the experimental results of the Pod type waterjet with the developed CFD in-house code based on the RANS equations. The developed code has been validated by comparing with the experimental results of the well-known turbine problem. The validation also extended to the flush type waterjet where the pressures along the duct surface and also velocities at nozzle area have been compared with experimental results. The Pod type waterjet has been designed and the performance of the designed waterjet system including duct, impeller and stator was analyzed by the previously mentioned in-house CFD Code. The pressure distributions and limiting streamlines on the blade surfaces were computed to confirm the performance of the designed waterjets. In addition, the torque and momentum were computed to find the entire efficiency and these were compared with the model test results. Measurements were taken of the flow rate at the nozzle exit, static pressure at the various sections along the duct and also the nozzle, revolution of the impeller, torque, thrust and towing forces at various advance speeds for the prediction of performance as well as for comparison with the computations. Based on these measurements, the performance was analyzed according to the ITTC96 standard analysis method. The full-scale effective and the delivered power of the wheeled vehicle were estimated for the prediction of the service speed. This paper emphasizes the confirmation of the ITTC96 analysis method and

Application of customer-interruption costs for optimum distribution planning

International Nuclear Information System (INIS)

Mok, Y.L.; Chung, T.S.

1996-01-01

We present a new methodology for obtaining optimum values of the integrated cost of utility investment with customer interruption in distribution planning for electric power systems by determining the reliability cost and worth of the distribution system. Reliability cost refers to investment cost of the utility in achieving a defined level of reliability. Reliability worth is the benefit gained by the utility customer from an increase of reliability. A computer program has been developed to determine comparative reliability indices for a typical distribution network. With the average interruption cost, outage duration, average disconnected load, cost data for distribution equipment, etc. being known, the relation between reliability cost, reliability worth and reliability at the specified load point are obtained. The optimum reliability of the distribution system is then determined from the minimum cost to the utility with customer interruption. The applicability of this approach is demonstrated by several practical networks. (Author)

LPGC, Levelized Steam Electric Power Generator Cost

International Nuclear Information System (INIS)

Coen, J.J.; Delene, J.G.

1994-01-01

1 - Description of program or function: LPGC is a set of nine microcomputer programs for estimating power generation costs for large steam-electric power plants. These programs permit rapid evaluation using various sets of economic and technical ground rules. The levelized power generation costs calculated may be used to compare the relative economics of nuclear and coal-fired plants based on life-cycle costs. Cost calculations include capital investment cost, operation and maintenance cost, fuel cycle cost, decommissioning cost, and total levelized power generation cost. These programs can be used for quick analyses of power generation costs using alternative economic parameters, such as interest rate, escalation rate, inflation rate, plant lead times, capacity factor, fuel prices, etc. The two major types of electric generating plants considered are pressurized-water reactor (PWR) and pulverized coal-fired plants. Data are also provided for the Large Scale Prototype Breeder (LSPB) type liquid metal reactor. Costs for plant having either one or two units may be obtained. 2 - Method of solution: LPGC consists of nine individual menu-driven programs controlled by a driver program, MAINPWR. The individual programs are PLANTCAP, for calculating capital investment costs; NUCLOM, for determining operation and maintenance (O and M) costs for nuclear plants; COALOM, for computing O and M costs for coal-fired plants; NFUEL, for calculating levelized fuel costs for nuclear plants; COALCOST, for determining levelized fuel costs for coal-fired plants; FCRATE, for computing the fixed charge rate on the capital investment; LEVEL, for calculating levelized power generation costs; CAPITAL, for determining capitalized cost from overnight cost; and MASSGEN, for generating, deleting, or changing fuel cycle mass balance data for use with NFUEL. LPGC has three modes of operation. In the first, each individual code can be executed independently to determine one aspect of the total

Computer aided instruction in the nuclear training classroom

International Nuclear Information System (INIS)

McFarlane, A.F.

1983-01-01

The objectives formulated for introducing computer aided instruction into the nuclear training programme are discussed and the process of comparative evaluation which was followed to arrive at a preferred system is described. Three points must be remembered. First it is unlikely that specialized training will benefit from any cost reduction since the total manpower invested can seldom be applied over enough students to represent an overall cost saving when compared with conventional classroom methods. Second it is unnecessary to present on a video screen material which would be better left in its original printed textbook or manual. Thirdly care must be taken not to assume too much or too little prior knowledge in the student. In nuclear training, concentrated information transfer is required in a short period of time. Carefully planned and executed computer assisted instruction can improve teaching effectiveness and provide a welcome alternative to conventional classroom instruction. (U.K.)

Scilab software as an alternative low-cost computing in solving the linear equations problem

Science.gov (United States)

Agus, Fahrul; Haviluddin

2017-02-01

Numerical computation packages are widely used both in teaching and research. These packages consist of license (proprietary) and open source software (non-proprietary). One of the reasons to use the package is a complexity of mathematics function (i.e., linear problems). Also, number of variables in a linear or non-linear function has been increased. The aim of this paper was to reflect on key aspects related to the method, didactics and creative praxis in the teaching of linear equations in higher education. If implemented, it could be contribute to a better learning in mathematics area (i.e., solving simultaneous linear equations) that essential for future engineers. The focus of this study was to introduce an additional numerical computation package of Scilab as an alternative low-cost computing programming. In this paper, Scilab software was proposed some activities that related to the mathematical models. In this experiment, four numerical methods such as Gaussian Elimination, Gauss-Jordan, Inverse Matrix, and Lower-Upper Decomposition (LU) have been implemented. The results of this study showed that a routine or procedure in numerical methods have been created and explored by using Scilab procedures. Then, the routine of numerical method that could be as a teaching material course has exploited.

Progress in multidimensional neutron transport computation

International Nuclear Information System (INIS)

Lewis, E.E.

1977-01-01

The methods available for solution of the time-independent neutron transport problems arising in the analysis of nuclear systems are examined. The merits of deterministic and Monte Carlo methods are briefly compared. The capabilities of deterministic computational methods derived from the first-order form of the transport equation, from the second-order even-parity form of this equation, and from integral transport formulations are discussed in some detail. Emphasis is placed on the approaches for dealing with the related problems of computer memory requirements, computational cost, and achievable accuracy. Attention is directed to some areas where problems exist currently and where the need for further work appears to be particularly warranted

New Federal Cost Accounting Regulations

Science.gov (United States)

Wolff, George J.; Handzo, Joseph J.

1973-01-01

Discusses a new set of indirect cost accounting procedures which must be followed by school districts wishing to recover any indirect costs of administering federal grants and contracts. Also discusses the amount of indirect costs that may be recovered, computing indirect costs, classifying project costs, and restricted grants. (Author/DN)

Cost-effectiveness analysis of metformin+dipeptidyl peptidase-4 inhibitors compared to metformin+sulfonylureas for treatment of type 2 diabetes.

Science.gov (United States)

Kwon, Christina S; Seoane-Vazquez, Enrique; Rodriguez-Monguio, Rosa

2018-02-01

Patients with type 2 diabetes (T2D) typically use several drug treatments during their lifetime. There is a debate about the best second-line therapy after metformin monotherapy failure due to the increasing number of available antidiabetic drugs and the lack of comparative clinical trials of secondary treatment regimens. While prior research compared the cost-effectiveness of two alternative drugs, the literature assessing T2D treatment pathways is scarce. The purpose of this study was to evaluate the long-term cost-effectiveness of dipeptidyl peptidase-4 inhibitors (DPP-4i) compared to sulfonylureas (SU) as second-line therapy in combination with metformin in patients with T2D. A Markov model was developed with four health states, 1 year cycle, and a 25-year time horizon. Clinical and cost data were collected from previous studies and other readily available secondary data sources. The incremental cost-effectiveness ratio (ICER) was estimated from the US third party payer perspective. Both, costs and outcomes, were discounted at a 3% annual discount rate. One way and probabilistic sensitivity analyses were performed to evaluate the impact of uncertainty on the base-case results. The discounted incremental cost of metformin+DPP-4i compared to metformin+SU was $11,849 and the incremental life-years gained were 0.61, resulting in an ICER of $19,420 per life-year gained for patients in the metformin+DPP-4i treatment pathway. The ICER estimated in the probabilistic sensitivity analysis was $19,980 per life-year gained. Sensitivity analyses showed that the results of the study were not sensitive to changes in the parameters used in base-case. The metformin+DPP-4i treatment pathway was cost-effective compared to metformin+SU as a long-term second-line therapy in the treatment of T2D from the US health care payer perspective. Study findings have the potential to provide clinicians and third party payers valuable evidence for the prescription and utilization of cost

Comparing Outcomes and Cost of 3 Surgical Treatments for Sagittal Synostosis: A Retrospective Study Including Procedure-Related Cost Analysis.

Science.gov (United States)

Garber, Sarah T; Karsy, Michael; Kestle, John R W; Siddiqi, Faizi; Spanos, Stephen P; Riva-Cambrin, Jay

2017-10-01

Neurosurgical techniques for repair of sagittal synostosis include total cranial vault (TCV) reconstruction, open sagittal strip (OSS) craniectomy, and endoscopic strip (ES) craniectomy. To evaluate outcomes and cost associated with these 3 techniques. Via retrospective chart review with waiver of informed consent, the last consecutive 100 patients with sagittal synostosis who underwent each of the 3 surgical correction techniques before June 30, 2013, were identified. Clinical, operative, and process of care variables and their associated specific charges were analyzed along with overall charge. The study included 300 total patients. ES patients had fewer transfusion requirements (13% vs 83%, P cost savings compared with the TCV reconstruction. The charges were similar to those incurred with OSS craniectomy, but patients had a shorter length of stay and fewer revisions. Copyright © 2017 by the Congress of Neurological Surgeons

Comparing the social skills of students addicted to computer games with normal students.

Science.gov (United States)

Zamani, Eshrat; Kheradmand, Ali; Cheshmi, Maliheh; Abedi, Ahmad; Hedayati, Nasim

2010-01-01

This study aimed to investigate and compare the social skills of studentsaddicted to computer games with normal students. The dependentvariable in the present study is the social skills. The study population included all the students in the second grade ofpublic secondary school in the city of Isfahan at the educational year of2009-2010. The sample size included 564 students selected using thecluster random sampling method. Data collection was conducted usingQuestionnaire of Addiction to Computer Games and Social SkillsQuestionnaire (The Teenage Inventory of Social Skill or TISS). The results of the study showed that generally, there was a significantdifference between the social skills of students addicted to computer gamesand normal students. In addition, the results indicated that normal studentshad a higher level of social skills in comparison with students addicted tocomputer games. As the study results showed, addiction to computer games may affectthe quality and quantity of social skills. In other words, the higher theaddiction to computer games, the less the social skills. The individualsaddicted to computer games have less social skills.).

Desalting sea water and brackish waters: a cost update

International Nuclear Information System (INIS)

Reed, S.A.; Wilson, J.V.

1977-01-01

This report, based on first-quarter 1977 dollars, is an update of costs presented in ORNL/TM-5070 (Rev.), which gave cost estimates for desalting seawater and brackish waters based on first-quarter 1975 financial parameters. Cost estimates are given for desalting seawater by distillation and reverse osmosis and for brackish waters using reverse osmosis and electrodialysis. Cost data were computed as a function of plant size and energy cost. The cost of generating steam and electrical energy on-site using coal-fired boilers as well as oil-fired boilers and dual-purpose electric/seawater distillation plants is included. While the costs of energy, equipment and labor have continued to rise, they have increased at a relatively modest rate compared with the two years prior to 1975. On an average, the cost of desalting seawater by distillation has increased approximately 15%. Costs for desalting brackish waters by the membrance processes have increased about 7%

COMPARATIVE STUDY OF TERTIARY WASTEWATER TREATMENT BY COMPUTER SIMULATION

Directory of Open Access Journals (Sweden)

Stefania Iordache

2010-01-01

Full Text Available The aim of this work is to asses conditions for implementation of a Biological Nutrient Removal (BNR process in theWastewater Treatment Plant (WWTP of Moreni city (Romania. In order to meet the more increased environmentalregulations, the wastewater treatment plant that was studied, must update the actual treatment process and have tomodernize it. A comparative study was undertaken of the quality of effluents that could be obtained by implementationof biological nutrient removal process like A2/O (Anaerobic/Anoxic/Oxic and VIP (Virginia Plant Initiative aswastewater tertiary treatments. In order to asses the efficiency of the proposed treatment schemata based on the datamonitored at the studied WWTP, it were realized computer models of biological nutrient removal configurations basedon A2/O and VIP process. Computer simulation was realized using a well-known simulator, BioWin by EnviroSimAssociates Ltd. The simulation process allowed to obtain some data that can be used in design of a tertiary treatmentstage at Moreni WWTP, in order to increase the efficiency in operation.

Ciclosporin compared with prednisolone therapy for patients with pyoderma gangrenosum: cost-effectiveness analysis of the STOP GAP trial.

Science.gov (United States)

Mason, J M; Thomas, K S; Ormerod, A D; Craig, F E; Mitchell, E; Norrie, J; Williams, H C

2017-12-01

Pyoderma gangrenosum (PG) is a painful, ulcerating skin disease with poor evidence for management. Prednisolone and ciclosporin are the most commonly used treatments, although not previously compared within a randomized controlled trial (RCT). To compare the cost-effectiveness of ciclosporin and prednisolone-initiated treatment for patients with PG. Quality of life (QoL, EuroQoL five dimensions three level questionnaire, EQ-5D-3L) and resource data were collected as part of the STOP GAP trial: a multicentre, parallel-group, observer-blind RCT. Within-trial analysis used bivariate regression of costs and quality-adjusted life years (QALYs), with multiple imputation of missing data, informing a probabilistic assessment of incremental treatment cost-effectiveness from a health service perspective. In the base case analysis, when compared with prednisolone, ciclosporin was cost-effective due to a reduction in costs [net cost: -£1160; 95% confidence interval (CI) -2991 to 672] and improvement in QoL (net QALYs: 0·055; 95% CI 0·018-0·093). However, this finding appears driven by a minority of patients with large lesions (≥ 20 cm 2 ) (net cost: -£5310; 95% CI -9729 to -891; net QALYs: 0·077; 95% CI 0·004-0·151). The incremental cost-effectiveness of ciclosporin for the majority of patients with smaller lesions was £23 374/QALY, although the estimate is imprecise: the probability of being cost-effective at a willingness-to-pay of £20 000/QALY was 43%. Consistent with the clinical findings of the STOP GAP trial, patients with small lesions should receive treatment guided by the side-effect profiles of the drugs and patient preference - neither strategy is clearly a preferred use of National Health Service resources. However, ciclosporin-initiated treatment may be more cost-effective for patients with large lesions. © 2017 The Authors. British Journal of Dermatology published by John Wiley & Sons Ltd on behalf of British Association of Dermatologists.

Analyzing medical costs with time-dependent treatment: The nested g-formula.

Science.gov (United States)

Spieker, Andrew; Roy, Jason; Mitra, Nandita

2018-04-16

As medical expenses continue to rise, methods to properly analyze cost outcomes are becoming of increasing relevance when seeking to compare average costs across treatments. Inverse probability weighted regression models have been developed to address the challenge of cost censoring in order to identify intent-to-treat effects (i.e., to compare mean costs between groups on the basis of their initial treatment assignment, irrespective of any subsequent changes to their treatment status). In this paper, we describe a nested g-computation procedure that can be used to compare mean costs between two or more time-varying treatment regimes. We highlight the relative advantages and limitations of this approach when compared with existing regression-based models. We illustrate the utility of this approach as a means to inform public policy by applying it to a simulated data example motivated by costs associated with cancer treatments. Simulations confirm that inference regarding intent-to-treat effects versus the joint causal effects estimated by the nested g-formula can lead to markedly different conclusions regarding differential costs. Therefore, it is essential to prespecify the desired target of inference when choosing between these two frameworks. The nested g-formula should be considered as a useful, complementary tool to existing methods when analyzing cost outcomes. Copyright © 2018 John Wiley & Sons, Ltd.

Costs of conservative management of early-stage prostate cancer compared to radical prostatectomy–a claims data analysis

Directory of Open Access Journals (Sweden)

Alina Brandes

2016-11-01

Full Text Available Abstract Background Due to widespread PSA testing incidence rates of localized prostate cancer increase but curative treatment is often not required. Overtreatment imposes a substantial economic burden on health care systems. We compared the direct medical costs of conservative management and radical therapy for the management of early-stage prostate cancer in routine care. Methods An observational study design is chosen based on claims data of a German statutory health insurance fund for the years 2008–2011. Three hundred fifty-three age-matched men diagnosed with prostate cancer and treated with conservative management and radical prostatectomy, are included. Individuals with diagnoses of metastases or treatment of advanced prostate cancer are excluded. In an excess cost approach direct medical costs are considered from an insured community perspective for in- and outpatient care, pharmaceuticals, physiotherapy, and assistive technologies. Generalized linear models adjust for comorbidity by Charlson comorbidity score and recycled predictions method calculates per capita costs per treatment strategy. Results After follow-up of 2.5 years per capita costs of conservative management are €6611 lower than costs of prostatectomy ([−9734;−3547], p < 0.0001. Complications increase costs of assistive technologies by 30% (p = 0.0182, but do not influence any other costs. Results are robust to cost outliers and incidence of prostate cancer diagnosis. The short time horizon does not allow assessing long-term consequences of conservative management. Conclusions At a time horizon of 2.5 years, conservative management is preferable to radical prostatectomy in terms of costs. Claims data analysis is limited in the selection of comparable treatment groups, as clinical information is scarce and bias due to non-randomization can only be partly mitigated by matching and confounder adjustment.

Cost-Effectiveness Analysis Comparing Pre-Diagnosis Autism Spectrum Disorder (ASD)-Targeted Intervention with Ontario's Autism Intervention Program

Science.gov (United States)

Penner, Melanie; Rayar, Meera; Bashir, Naazish; Roberts, S. Wendy; Hancock-Howard, Rebecca L.; Coyte, Peter C.

2015-01-01

Novel management strategies for autism spectrum disorder (ASD) propose providing interventions before diagnosis. We performed a cost-effectiveness analysis comparing the costs and dependency-free life years (DFLYs) generated by pre-diagnosis intensive Early Start Denver Model (ESDM-I); pre-diagnosis parent-delivered ESDM (ESDM-PD); and the Ontario…

Cost-effectiveness of routine computed tomography in the evaluation of idiopathic unilateral vocal fold paralysis.

Science.gov (United States)

Hojjat, Houmehr; Svider, Peter F; Folbe, Adam J; Raza, Syed N; Carron, Michael A; Shkoukani, Mahdi A; Merati, Albert L; Mayerhoff, Ross M

2017-02-01

To evaluate the cost-effectiveness of routine computed tomography (CT) in individuals with unilateral vocal fold paralysis (UVFP) STUDY DESIGN: Health Economics Decision Tree Analysis METHODS: A decision tree was constructed to determine the incremental cost-effectiveness ratio (ICER) of CT imaging in UVFP patients. Univariate sensitivity analysis was utilized to calculate what the probability of having an etiology of the paralysis discovered would have to be to make CT with contrast more cost-effective than no imaging. We used two studies examining findings in UVFP patients. The decision pathways were utilizing CT neck with intravenous contrast after diagnostic laryngoscopy versus laryngoscopy alone. The probability of detecting an etiology for UVFP and associated costs were extracted to construct the decision tree. The only incorrect diagnosis was missing a mass in the no-imaging decision branch, which rendered an effectiveness of 0. The ICER of using CT was $3,306, below most acceptable willingness-to-pay (WTP) thresholds. Additionally, univariate sensitivity analysis indicated that at the WTP threshold of $30,000, obtaining CT imaging was the most cost-effective choice when the probability of having a lesion was above 1.7%. Multivariate probabilistic sensitivity analysis with Monte Carlo simulations also showed that at the WTP of $30,000, CT scanning is more cost-effective, with 99.5% certainty. Particularly in the current healthcare environment characterized by increasing consciousness of utilization defensive medicine, economic evaluations represent evidence-based findings that can be employed to facilitate appropriate decision making and enhance physician-patient communication. This economic evaluation strongly supports obtaining CT imaging in patients with newly diagnosed UVFP. 2c. Laryngoscope, 2016 127:440-444, 2017. © 2016 The American Laryngological, Rhinological and Otological Society, Inc.

Studi Perbandingan Layanan Cloud Computing

Directory of Open Access Journals (Sweden)

Afdhal Afdhal

2014-03-01

Full Text Available In the past few years, cloud computing has became a dominant topic in the IT area. Cloud computing offers hardware, infrastructure, platform and applications without requiring end-users knowledge of the physical location and the configuration of providers who deliver the services. It has been a good solution to increase reliability, reduce computing cost, and make opportunities to IT industries to get more advantages. The purpose of this article is to present a better understanding of cloud delivery service, correlation and inter-dependency. This article compares and contrasts the different levels of delivery services and the development models, identify issues, and future directions on cloud computing. The end-users comprehension of cloud computing delivery service classification will equip them with knowledge to determine and decide which business model that will be chosen and adopted securely and comfortably. The last part of this article provides several recommendations for cloud computing service providers and end-users.

Controlling costs without compromising quality: paying hospitals for total knee replacement.

Science.gov (United States)

Pine, Michael; Fry, Donald E; Jones, Barbara L; Meimban, Roger J; Pine, Gregory J

2010-10-01

Unit costs of health services are substantially higher in the United States than in any other developed country in the world, without a correspondingly healthier population. An alternative payment structure, especially for high volume, high cost episodes of care (eg, total knee replacement), is needed to reward high quality care and reduce costs. The National Inpatient Sample of administrative claims data was used to measure risk-adjusted mortality, postoperative length-of-stay, costs of routine care, adverse outcome rates, and excess costs of adverse outcomes for total knee replacements performed between 2002 and 2005. Empirically identified inefficient and ineffective hospitals were then removed to create a reference group of high-performance hospitals. Predictive models for outcomes and costs were recalibrated to the reference hospitals and used to compute risk-adjusted outcomes and costs for all hospitals. Per case predicted costs were computed and compared with observed costs. Of the 688 hospitals with acceptable data, 62 failed to meet effectiveness criteria and 210 were identified as inefficient. The remaining 416 high-performance hospitals had 13.4% fewer risk-adjusted adverse outcomes (4.56%-3.95%; P costs ($12,773-$11,512; P costs. A payment system based on the demonstrated performance of effective, efficient hospitals can produce sizable cost savings without jeopardizing quality. In this study, 96% of total excess hospital costs resulted from higher routine costs at inefficient hospitals, whereas only 4% was associated with ineffective care.

24 CFR 908.108 - Cost.

Science.gov (United States)

2010-04-01

... 24 Housing and Urban Development 4 2010-04-01 2010-04-01 false Cost. 908.108 Section 908.108..., RENTAL VOUCHER, AND MODERATE REHABILITATION PROGRAMS § 908.108 Cost. (a) General. The costs of the... computer hardware or software, or both, the cost of contracting for those services, or the cost of...

Cost Utility Analysis of Topical Steroids Compared With Dietary Elimination for Treatment of Eosinophilic Esophagitis.

Science.gov (United States)

Cotton, Cary C; Erim, Daniel; Eluri, Swathi; Palmer, Sarah H; Green, Daniel J; Wolf, W Asher; Runge, Thomas M; Wheeler, Stephanie; Shaheen, Nicholas J; Dellon, Evan S

2017-06-01

Topical corticosteroids or dietary elimination are recommended as first-line therapies for eosinophilic esophagitis, but data to directly compare these therapies are scant. We performed a cost utility comparison of topical corticosteroids and the 6-food elimination diet (SFED) in treatment of eosinophilic esophagitis, from the payer perspective. We used a modified Markov model based on current clinical guidelines, in which transition between states depended on histologic response simulated at the individual cohort-member level. Simulation parameters were defined by systematic review and meta-analysis to determine the base-case estimates and bounds of uncertainty for sensitivity analysis. Meta-regression models included adjustment for differences in study and cohort characteristics. In the base-case scenario, topical fluticasone was about as effective as SFED but more expensive at a 5-year time horizon ($9261.58 vs $5719.72 per person). SFED was more effective and less expensive than topical fluticasone and topical budesonide in the base-case scenario. Probabilistic sensitivity analysis revealed little uncertainty in relative treatment effectiveness. There was somewhat greater uncertainty in the relative cost of treatments; most simulations found SFED to be less expensive. In a cost utility analysis comparing topical corticosteroids and SFED for first-line treatment of eosinophilic esophagitis, the therapies were similar in effectiveness. SFED was on average less expensive, and more cost effective in most simulations, than topical budesonide and topical fluticasone, from a payer perspective and not accounting for patient-level costs or quality of life. Copyright © 2017 AGA Institute. Published by Elsevier Inc. All rights reserved.

Computations for the 1:5 model of the THTR pressure vessel compared with experimental results

International Nuclear Information System (INIS)

Stangenberg, F.

1972-01-01

In this report experimental results measured at the 1:5-model of the prestressed concrete pressure vessel of the THTR-nuclear power station Schmehausen in 1971, are compared with the results of axis-symmetrical computations. Linear-elastic computations were performed as well as approximate computations for overload pressures taking into consideration the influences of the load history (prestressing, temperature, creep) and the effects of the steel components. (orig.) [de

Evaluation of Cloud Computing Hidden Benefits by Using Real Options Analysis

Directory of Open Access Journals (Sweden)

Pavel Náplava

2016-12-01

Full Text Available Cloud computing technologies have brought new attributes to the IT world. One of them is a flexibility of IT resources. It enables effectively both to downsize and upsize the capacity of IT resources in real time. Requirements for IT size change defines business strategy and actual market state. IT costs are not stable but dynamic in this case. Standard investment valuation methods (both static and dynamic are not able to include the flexibility attribute to the evaluation of IT projects. This article describes the application of the Real Options Analysis method for the valuation of the cloud computing flexibility. The method compares costs of the on-premise and cloud computing solutions by combining put and call option valuation. Cloud computing providers can use the method as an advanced tool that explains hidden benefits of cloud computing. Unexperienced cloud computing customers can simulate the market behavior and better plan necessary IT investments.

Comparing Experiment and Computation of Hypersonic Laminar Boundary Layers with Isolated Roughness

Science.gov (United States)

Bathel, Brett F.; Iyer, Prahladh S.; Mahesh, Krishnan; Danehy, Paul M.; Inman, Jennifer A.; Jones, Stephen B.; Johansen, Craig T.

2014-01-01

Streamwise velocity profile behavior in a hypersonic laminar boundary layer in the presence of an isolated roughness element is presented for an edge Mach number of 8.2. Two different roughness element types are considered: a 2-mm tall, 4-mm diameter cylinder, and a 2-mm radius hemisphere. Measurements of the streamwise velocity behavior using nitric oxide (NO) planar laser-induced fluorescence (PLIF) molecular tagging velocimetry (MTV) have been performed on a 20-degree wedge model. The top surface of this model acts as a flat-plate and is oriented at 5 degrees with respect to the freestream flow. Computations using direct numerical simulation (DNS) of these flows have been performed and are compared to the measured velocity profiles. Particular attention is given to the characteristics of velocity profiles immediately upstream and downstream of the roughness elements. In these regions, the streamwise flow can experience strong deceleration or acceleration. An analysis in which experimentally measured MTV profile displacements are compared with DNS particle displacements is performed to determine if the assumption of constant velocity over the duration of the MTV measurement is valid. This assumption is typically made when reporting MTV-measured velocity profiles, and may result in significant errors when comparing MTV measurements to computations in regions with strong deceleration or acceleration. The DNS computations with the cylindrical roughness element presented in this paper were performed with and without air injection from a rectangular slot upstream of the cylinder. This was done to determine the extent to which gas seeding in the MTV measurements perturbs the boundary layer flowfield.

Inpatient Hospitalization Costs: A Comparative Study of Micronesians, Native Hawaiians, Japanese, and Whites in Hawai‘i

Directory of Open Access Journals (Sweden)

Megan Hagiwara

2015-12-01

Full Text Available Considerable interest exists in health care costs for the growing Micronesian population in the United States (US due to their significant health care needs, poor average socioeconomic status, and unique immigration status, which impacts their access to public health care coverage. Using Hawai‘i statewide impatient data from 2010 to 2012 for Micronesians, whites, Japanese, and Native Hawaiians (N = 162,152 hospitalizations, we compared inpatient hospital costs across racial/ethnic groups using multivariable models including age, gender, payer, residence location, and severity of illness (SOI. We also examined total inpatient hospital costs of Micronesians generally and for Medicaid specifically. Costs were estimated using standard cost-to-charge metrics overall and within nine major disease categories determined by All Patient Refined Diagnosis Related Groups. Micronesians had higher unadjusted hospitalization costs overall and specifically within several disease categories (including infectious and heart diseases. Higher SOI in Micronesians explained some, but not all, of these higher costs. The total cost of the 3486 Micronesian hospitalizations in the three-year study period was $58.1 million and 75% was covered by Medicaid; 23% of Native Hawaiian, 3% of Japanese, and 15% of white hospitalizations costs were covered by Medicaid. These findings may be of particular interests to hospitals, Medicaid programs, and policy makers.

A comparative analysis of costs of single and dual rapid HIV and syphilis diagnostics: results from a randomised controlled trial in Colombia.

Science.gov (United States)

Obure, Carol Dayo; Gaitan-Duarte, Hernando; Losada Saenz, Ricardo; Gonzalez, Lina; Angel-Muller, Edith; Laverty, Maura; Perez, Freddy

2017-11-01

HIV and congenital syphilis are major public health burdens contributing to substantial perinatal morbidity and mortality globally. Although studies have reported on the costs and cost-effectiveness of rapid diagnostic tests (RDTs) for syphilis screening within antenatal care in a number of resource-constrained settings, empirical evidence on country-specific cost and estimates of single RDTs compared with dual RDTs for HIV and syphilis are limited. A cluster randomised controlled study design was used to compare the incremental costs of two testing algorithms: (1) single RDTs for HIV and syphilis and (2) dual RDTs for HIV and syphilis, in 12 health facilities in Bogota and Cali, Colombia. The costs of single HIV and syphilis RDTs and dual HIV and syphilis RDTs were collected from each of the health facilities. The economic costs per woman tested for HIV and syphilis and costs per woman treated for syphilis defined as the total costs required to test and treat one woman for syphilis were estimated. A total of 2214 women were tested in the study facilities. Cost per pregnant woman tested and cost per woman treated for syphilis were US$10.26 and US$607.99, respectively in the single RDT arm. For the dual RDTs, the cost per pregnant woman tested for HIV and syphilis and cost per woman treated for syphilis were US$15.89 and US$1859.26, respectively. Overall costs per woman tested for HIV and syphilis and cost per woman treated for syphilis were lower in Cali compared with Bogota across both intervention arms. Staff costs accounted for the largest proportion of costs while treatment costs comprised <1% of the preventive programme. Findings show lower average costs for single RDTs compared with dual RDTs with costs sensitive to personnel costs and the scale of output at the health facilities. NCT02454816; results. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/.

MONITOR: A computer model for estimating the costs of an integral monitored retrievable storage facility

International Nuclear Information System (INIS)

Reimus, P.W.; Sevigny, N.L.; Schutz, M.E.; Heller, R.A.

1986-12-01

The MONITOR model is a FORTRAN 77 based computer code that provides parametric life-cycle cost estimates for a monitored retrievable storage (MRS) facility. MONITOR is very flexible in that it can estimate the costs of an MRS facility operating under almost any conceivable nuclear waste logistics scenario. The model can also accommodate input data of varying degrees of complexity and detail (ranging from very simple to more complex) which makes it ideal for use in the MRS program, where new designs and new cost data are frequently offered for consideration. MONITOR can be run as an independent program, or it can be interfaced with the Waste System Transportation and Economic Simulation (WASTES) model, a program that simulates the movement of waste through a complete nuclear waste disposal system. The WASTES model drives the MONITOR model by providing it with the annual quantities of waste that are received, stored, and shipped at the MRS facility. Three runs of MONITOR are documented in this report. Two of the runs are for Version 1 of the MONITOR code. A simulation which uses the costs developed by the Ralph M. Parsons Company in the 2A (backup) version of the MRS cost estimate. In one of these runs MONITOR was run as an independent model, and in the other run MONITOR was run using an input file generated by the WASTES model. The two runs correspond to identical cases, and the fact that they gave identical results verified that the code performed the same calculations in both modes of operation. The third run was made for Version 2 of the MONITOR code. A simulation which uses the costs developed by the Ralph M. Parsons Company in the 2B (integral) version of the MRS cost estimate. This run was made with MONITOR being run as an independent model. The results of several cases have been verified by hand calculations

Comparing treatment persistence, healthcare resource utilization, and costs in adult patients with major depressive disorder treated with escitalopram or citalopram.

Science.gov (United States)

Wu, Eric Q; Greenberg, Paul E; Ben-Hamadi, Rym; Yu, Andrew P; Yang, Elaine H; Erder, M Haim

2011-03-01

Major depressive disorder is the most common type of depression, affecting 6.6% of adults in the United States annually. Citalopram and escitalopram are common second-generation antidepressants used for the treatment of patients with this disorder. Because citalopram is available in generic forms that have lower acquisition costs compared with the branded escitalopram, some health plans may provide incentives to encourage the use of the generic option. Decisions based solely on drug acquisition costs may encourage the use of a therapy that is less cost-effective when treatment persistence, healthcare utilization, and overall costs are factored in. To compare, in a real-world setting, the treatment persistence, healthcare utilization, and overall costs of managing adult patients with major depressive disorder who are treated with escitalopram or citalopram. Administrative claims data (from January 1, 2003, to June 30, 2005) were analyzed for patients with major depressive disorder aged ≥18 years. Patients filled ≥1 prescriptions for citalopram or for escitalopram (first-fill time was defined as the index date) and had no second-generation antidepressant use during the 6-month preindex period. Treatment persistence, healthcare utilization, and healthcare costs were measured over the 6-month preindex and 6-month postindex periods and compared between patients treated with citalopram or escitalopram, using unadjusted and multivariate analyses. Patients receiving escitalopram (N = 10,465) were less likely to discontinue the treatment (hazard ratio 0.94; P = .005) and switch to another second-generation antidepressant (hazard ratio 0.83; P escitalopram were also less likely to have a hospital admission (odds ratio 0.88; P = .036) or an emergency department visit and had lower total healthcare costs (-$1174) and major depressive disorder-related costs (-$109; P escitalopram, patients treated with escitalopram had better treatment persistence, lower healthcare

Darwinian Spacecraft: Soft Computing Strategies Breeding Better, Faster Cheaper

Science.gov (United States)

Noever, David A.; Baskaran, Subbiah

1999-01-01

Computers can create infinite lists of combinations to try to solve a particular problem, a process called "soft-computing." This process uses statistical comparables, neural networks, genetic algorithms, fuzzy variables in uncertain environments, and flexible machine learning to create a system which will allow spacecraft to increase robustness, and metric evaluation. These concepts will allow for the development of a spacecraft which will allow missions to be performed at lower costs.

Comparative evaluation of computed tomography for dental implants on the mandibular edentulous area

Energy Technology Data Exchange (ETDEWEB)

Sun, Kyung Hoon; Jeong, Ho Gul; Park, Hyok; Park, Chang Seo; Kim, Kee Deog [Department of Oral and Maxillofacial Radiology, Oral Science Research Center, College of Dentistry, Yonsei University, Seoul (Korea, Republic of)

2009-03-15

The purpose of this study was to evaluate the clinical usefulness of the recently developed multi-detector computed tomography and cone beam computed tomography in pre-operative implant evaluation, by comparing them with the single detector computed tomography, already confirmed for accuracy in this area. Five partially edentulous dry human mandibles, with 1 X 1 mm gutta percha cones, placed in 5 mm intervals posterior to the mental foramen on each side of the buccal part of the mandible, were used in this study. They were scanned as follows: 1) Single detector computed tomography: slice thickness 1 mm, 200 mA, 120 kV 2) Multi-detector computed tomography: slice thickness 0.75 mm, 250 mA, 120 kV 3) Cone beam computed tomography: 15 mAs, 120 kV Axial images acquired from three computed tomographs were transferred to personal computer, and then reformatted cross-sectional images were generated using V-Implant 2.0 (CyberMed Inc., Seoul, Korea) software. Among the cross-sectional images of the gutta percha cone, placed in the buccal body of the mandible, the most precise cross section was selected as the measuring point and the distance from the most superior border of the mandibular canal to the alveolar crest was measured and analyzed 10 times by a dentist. There were no significant intraobserver differences in the distance from the most superior border of the mandibular canal to the alveolar crest (p>0.05). There were no significant differences among single detector computed tomography, multi-detector computed tomography and cone beam computed tomography in the distance from the most superior border of the mandibular canal to the alveolar crest (p>0.05). Multi-detector computed tomography and cone beam computed tomography are clinically useful in the evaluation of pre-operative site for mandibular dental implants, with consideration for radiation exposure dose and scanning time.

Comparative evaluation of computed tomography for dental implants on the mandibular edentulous area

International Nuclear Information System (INIS)

Sun, Kyung Hoon; Jeong, Ho Gul; Park, Hyok; Park, Chang Seo; Kim, Kee Deog

2009-01-01

The purpose of this study was to evaluate the clinical usefulness of the recently developed multi-detector computed tomography and cone beam computed tomography in pre-operative implant evaluation, by comparing them with the single detector computed tomography, already confirmed for accuracy in this area. Five partially edentulous dry human mandibles, with 1 X 1 mm gutta percha cones, placed in 5 mm intervals posterior to the mental foramen on each side of the buccal part of the mandible, were used in this study. They were scanned as follows: 1) Single detector computed tomography: slice thickness 1 mm, 200 mA, 120 kV 2) Multi-detector computed tomography: slice thickness 0.75 mm, 250 mA, 120 kV 3) Cone beam computed tomography: 15 mAs, 120 kV Axial images acquired from three computed tomographs were transferred to personal computer, and then reformatted cross-sectional images were generated using V-Implant 2.0 (CyberMed Inc., Seoul, Korea) software. Among the cross-sectional images of the gutta percha cone, placed in the buccal body of the mandible, the most precise cross section was selected as the measuring point and the distance from the most superior border of the mandibular canal to the alveolar crest was measured and analyzed 10 times by a dentist. There were no significant intraobserver differences in the distance from the most superior border of the mandibular canal to the alveolar crest (p>0.05). There were no significant differences among single detector computed tomography, multi-detector computed tomography and cone beam computed tomography in the distance from the most superior border of the mandibular canal to the alveolar crest (p>0.05). Multi-detector computed tomography and cone beam computed tomography are clinically useful in the evaluation of pre-operative site for mandibular dental implants, with consideration for radiation exposure dose and scanning time.

DEVELOPMENT OF QUARRY SOLUTION VERSION 1.0 FOR QUICK COMPUTATION OF DRILLING AND BLASTING PARAMETERS

Directory of Open Access Journals (Sweden)

B. ADEBAYO

2014-10-01

Full Text Available Computation of drilling cost, quantity of explosives and blasting cost are routine procedure in Quarry and all these parameters are estimated manually in most of the quarries in Nigeria. This paper deals with the development of application package QUARRY SOLUTION Version 1.0 for quarries using Visual Basic 6.0. In order to achieve this data were obtained from the quarry such as drilling and blasting activities. Also, empirical formulae developed by different researchers were used for computation of the required parameters viz: practical burden, spacing, length of hole, cost of drilling consumables, drilling cost, powder factor, quantity of column charge, total quantity of explosives, volume of blast and blasting cost. The output obtained from the software QUARRY SOLUTION Version 1.0 for length of drilling, drilling cost, total quantity of explosives, volume of blast and blasting cost were compared with the results manually computed for these routine parameters estimated during drilling and blasting operation in quarry, it was then discovered that they followed the same trend. The computation from the application package revealed that 611 blast-holes require 3326.71 kg of high explosives (166 cartons of explosives and 20147.2 kg of low explosives (806 bags of explosives. The total cost was computed to be N 5133999:50 ($ 32087.49. Moreover, the output showed that these routine parameters estimated during drilling and blasting could be computed within a short time frame using this QUARRY SOLUTION, therefore, improving productivity and efficiency. This application package is recommended for use in open-pit and quarries when all necessary inputs are supplied.

The cost-effectiveness of methanol for reducing motor vehicle emissions and urban ozone

International Nuclear Information System (INIS)

Krupnick, A.J.; Walls, M.A.

1992-01-01

This article analyzes the costs and emissions characteristics of methanol vehicles. The cost-effectiveness of methanol - the cost per ton of reactive hydrocarbon emissions reduced - is calculated and compared to the cost-effectiveness of other hydrocarbon reduction strategies. Methanol is found to cost from $33,000 to nearly $60,000 per ton, while several other options are available for under $10,000 per ton. The cost per part-per-million reduction in peak ambient ozone levels is also computed for two cities, Houston and Philadelphia. Despite the greater improvement in ozone in Philadelphia than Houston, methanol is found to be more cost-effective in Houston. This result occurs because Houston's distribution and marketing costs are lower than Philadelphia's. The costs in both cities, however, are far higher than estimates of the benefits from acute health improvements. Finally, the reduction in ozone exposure in Los Angeles is estimated and the costs of the reduction compared with an estimate of acute health benefits. Again, the benefits fall far short of the costs. 51 refs., 5 tabs

Complete daVinci versus laparoscopic pyeloplasty: cost analysis.

Science.gov (United States)

Bhayani, Sam B; Link, Richard E; Varkarakis, John M; Kavoussi, Louis R

2005-04-01

Computer-assisted pyeloplasty with the daVinci system is an emerging technique to treat ureteropelvic junction (UPJ) obstruction. A relative cost analysis was performed assessing this technology in comparison with purely laparoscopic pyeloplasty. Eight patients underwent computer-assisted (daVinci) dismembered pyeloplasty (CP) via a transperitoneal four-port approach. They were compared with 13 patients who underwent purely laparoscopic pyeloplasty (LP). All patients had a primary UPJ obstruction and were matched for age, sex, and body mass index. The cost of equipment and capital depreciation for both procedures, as well as assessment of room set-up time, takedown time, and personnel were analyzed. Surgeons and nursing staff for both groups were experienced in both laparoscopy and daVinci procedures. One- and two-way financial analysis was performed to assess relative costs. The mean set-up and takedown time was 71 minutes for CP and 49 minutes for LP. The mean length of stay was 2.3 days for CP and 2.5 days for LP. The mean operating room (OR) times for CP and LP were 176 and 210 minutes, respectively. There were no complications in either group. One-way cost analysis with an economic model showed that LP is more cost effective than CP at our hospital if LP OR time is cost effective as LP. Two-way sensitivity analysis shows that in-room time must still be 500 to obtain cost equivalence for CP. Perioperative parameters for CP are encouraging. However, the costs are a clear disadvantage. In our hospital, it is more cost effective to teach and perform LP than to perform CP.

Life Cycle Assessment and Costing Methods for Device Procurement: Comparing Reusable and Single-Use Disposable Laryngoscopes.

Science.gov (United States)

Sherman, Jodi D; Raibley, Lewis A; Eckelman, Matthew J

2018-01-09

Traditional medical device procurement criteria include efficacy and safety, ease of use and handling, and procurement costs. However, little information is available about life cycle environmental impacts of the production, use, and disposal of medical devices, or about costs incurred after purchase. Reusable and disposable laryngoscopes are of current interest to anesthesiologists. Facing mounting pressure to quickly meet or exceed conflicting infection prevention guidelines and oversight body recommendations, many institutions may be electively switching to single-use disposable (SUD) rigid laryngoscopes or overcleaning reusables, potentially increasing both costs and waste generation. This study provides quantitative comparisons of environmental impacts and total cost of ownership among laryngoscope options, which can aid procurement decision making to benefit facilities and public health. We describe cradle-to-grave life cycle assessment (LCA) and life cycle costing (LCC) methods and apply these to reusable and SUD metal and plastic laryngoscope handles and tongue blade alternatives at Yale-New Haven Hospital (YNHH). The US Environmental Protection Agency's Tool for the Reduction and Assessment of Chemical and other environmental Impacts (TRACI) life cycle impact assessment method was used to model environmental impacts of greenhouse gases and other pollutant emissions. The SUD plastic handle generates an estimated 16-18 times more life cycle carbon dioxide equivalents (CO2-eq) than traditional low-level disinfection of the reusable steel handle. The SUD plastic tongue blade generates an estimated 5-6 times more CO2-eq than the reusable steel blade treated with high-level disinfection. SUD metal components generated much higher emissions than all alternatives. Both the SUD handle and SUD blade increased life cycle costs compared to the various reusable cleaning scenarios at YNHH. When extrapolated over 1 year (60,000 intubations), estimated costs increased

Near DC eddy current measurement of aluminum multilayers using MR sensors and commodity low-cost computer technology

Science.gov (United States)

Perry, Alexander R.

2002-06-01

Low Frequency Eddy Current (EC) probes are capable of measurement from 5 MHz down to DC through the use of Magnetoresistive (MR) sensors. Choosing components with appropriate electrical specifications allows them to be matched to the power and impedance characteristics of standard computer connectors. This permits direct attachment of the probe to inexpensive computers, thereby eliminating external power supplies, amplifiers and modulators that have heretofore precluded very low system purchase prices. Such price reduction is key to increased market penetration in General Aviation maintenance and consequent reduction in recurring costs. This paper examines our computer software CANDETECT, which implements this approach and permits effective probe operation. Results are presented to show the intrinsic sensitivity of the software and demonstrate its practical performance when seeking cracks in the underside of a thick aluminum multilayer structure. The majority of the General Aviation light aircraft fleet uses rivets and screws to attach sheet aluminum skin to the airframe, resulting in similar multilayer lap joints.

Comparing Computer Game and Traditional Lecture Using Experience Ratings from High and Low Achieving Students

Science.gov (United States)

Grimley, Michael; Green, Richard; Nilsen, Trond; Thompson, David

2012-01-01

Computer games are purported to be effective instructional tools that enhance motivation and improve engagement. The aim of this study was to investigate how tertiary student experiences change when instruction was computer game based compared to lecture based, and whether experiences differed between high and low achieving students. Participants…

Comparing climate and cost impacts of reference levels for reducing emissions from deforestation

Energy Technology Data Exchange (ETDEWEB)

Busch, Jonah [Center for Applied Biodiversity Science, Conservation International, 2011 Crystal Drive, Suite 500, Arlington, VA (United States); Strassburg, Bernardo [Center for Social and Economic Research on the Global Environment, University of East Anglia, Norwich NR4 7TJ (United Kingdom); Cattaneo, Andrea [Woods Hole Research Center, 149 Woods Hole Road, Falmouth, MA 02540-1644 (United States); Lubowski, Ruben [Environmental Defense Fund, 1875 Connecticut Avenue NW, Washington, DC (United States); Bruner, Aaron; Rice, Richard; Boltz, Frederick [Conservation International, 2011 Crystal Drive, Suite 500, Arlington, VA (United States); Creed, Anna; Ashton, Ralph, E-mail: jbusch@conservation.or [Terrestrial Carbon Group, 900 17th Street NW, Suite 700, Washington, DC (United States)

2009-10-15

The climate benefit and economic cost of an international mechanism for reducing emissions from deforestation and degradation (REDD) will depend on the design of reference levels for crediting emission reductions. We compare the impacts of six proposed reference level designs on emission reduction levels and on cost per emission reduction using a stylized partial equilibrium model (the open source impacts of REDD incentives spreadsheet; OSIRIS). The model explicitly incorporates national incentives to participate in an international REDD mechanism as well as international leakage of deforestation emissions. Our results show that a REDD mechanism can provide cost-efficient climate change mitigation benefits under a broad range of reference level designs. We find that the most effective reference level designs balance incentives to reduce historically high deforestation emissions with incentives to maintain historically low deforestation emissions. Estimates of emission reductions under REDD depend critically on the degree to which demand for tropical frontier agriculture generates leakage. This underscores the potential importance to REDD of complementary strategies to supply agricultural needs outside of the forest frontier.

Comparing climate and cost impacts of reference levels for reducing emissions from deforestation