Development of technologies for utilizing geothermal energy

Energy Technology Data Exchange (ETDEWEB)

NONE

1995-09-01

In verifying the effectiveness of the deep geothermal resource exploration technology, development is being carried out on a fracture-type reservoir exploration method. The seismic exploration method investigates detailed structures of underground fracture systems by using seismic waves generated on the ground surface. Verification experiments for fiscal 1994 were carried out by selecting the Kakkonda area in which small fracture networks form reservoir beds. Geothermal resources in deep sections (deeper than 2000 m with temperatures higher than 350{degree}C) are promising in terms of amount of the resources, but anticipated with difficulty in exploration and impediments in drilling. To avoid these risks, studies are being progressed on the availability of resources in deep sections, their utilization possibility, and technologies of effective exploration and drilling. This paper summarizes the results of deep resource investigations during fiscal 1994. It also describes such technological development as hot water utilizing power generation. Development is performed on a binary cycle power generation plant which pumps and utilizes hot water of 150 to 200{degree}C by using a downhole pump. The paper also reports development on element technologies for hot rock power generation systems. It also dwells on development of safe and effective drilling and production technologies for deep geothermal resources.

Utilizing Information Technology to Facilitate Rapid Acquisition

Science.gov (United States)

2006-06-01

PAGES 109 14. SUBJECT TERMS Rapid Acquisition, eCommerce , eProcurement, Information Technology, Contracting, Global Information Network...Agency. 5 eCommerce and eProcurement, and possess an adequate knowledge of information technology. D. RESEARCH QUESTIONS 1. Primary Research... eCommerce , Information Technology, and eProcurement knowledge, and government and private industry reports utilizing numerous library and Internet

The design of a comprehensive microsimulator of household vehicle fleet composition, utilization, and evolution.

Science.gov (United States)

2012-01-01

The report describes a comprehensive vehicle fleet composition, utilization, and evolution : simulator that can be used to forecast household vehicle ownership and mileage by type of : vehicle over time. The components of the simulator are developed ...

Development of technologies for solar energy utilization

Energy Technology Data Exchange (ETDEWEB)

NONE

1995-09-01

With relation to the development of photovoltaic power systems for practical use, studies were made on thin-substrate polycrystalline solar cells and thin-film solar cells as manufacturing technology for solar cells for practical use. The technological development for super-high efficiency solar cells was also being advanced. Besides, the research and development have been conducted of evaluation technology for photovoltaic power systems and systems to utilize the photovoltaic power generation and peripheral technologies. The demonstrative research on photovoltaic power systems was continued. The international cooperative research on photovoltaic power systems was also made. The development of a manufacturing system for compound semiconductors for solar cells was carried out. As to the development of solar energy system technologies for industrial use, a study of elemental technologies was first made, and next the development of an advanced heat process type solar energy system was commenced. In addition, the research on passive solar systems was made. An investigational study was carried out of technologies for solar cities and solar energy snow melting systems. As international joint projects, studies were made of solar heat timber/cacao drying plants, etc. The paper also commented on projects for international cooperation for the technological development of solar energy utilization systems. 26 figs., 15 tabs.

Utilization Of Information And Communication Technology (ICT) For ...

African Journals Online (AJOL)

Utilization Of Information And Communication Technology (ICT) For Information Service Delivery In University Libraries In Adamawa State. ... inability to provide alternative power supply are major constraints to effective utilization of the ICT.

Utilization technology on slurried ash

Energy Technology Data Exchange (ETDEWEB)

Kanbe, Yoshio; Yasuda, Minoru; Furuki, Yasuhiko [The Coal Mining Research Centre, Japan, Tokyo, Japan; Electric Power Development Co., Ltd., Tokyo (Japan))

1987-08-01

Three research results of the utilization technology on slurried ash were reported. As for the utilization as the fly ash quick setting (FQS) backfill grout for tail void in shield works of tunneling, grout blending was simplified, the blended solution of cement, clay, additives and water was stabilized, and a favorable workability and long term durability were obtained. As for the utilization as the material of a SMW (soil mixing wall) method for continuous walls in long shaft digging, a fly ash-gypsum-cement (FGC) stabilizer showed an excellent workability and remarkably high water-tightness as compared with conventional cement bentonite. As for the utilization as the material of an injection method of overlay mats in foundation works of light weight structures on the sea bed mud foundation, since a FGC concrete weight in water was remarkably light as 0.7t/m{sup 3}, no both large mold form strength and vibration compacting were required. 10 figs., 8 tabs.

Gas utilization technologies

International Nuclear Information System (INIS)

Biljetina, R.

1994-01-01

One of the constant challenges facing the research community is the identification of technology needs 5 to 15 years from now. A look back into history indicates that the forces driving natural gas research have changed from decade to decade. In the 1970s research was driven by concerns for adequate supply; in the 1980s research was aimed at creating new markets for natural gas. What then are the driving forces for the 1990s? Recent reports from the natural gas industry have helped define a new direction driven primarily by market demand for natural gas. A study prepared by the Interstate Natural Gas Association of America Foundation entitled ''Survey of Natural Research, Development, and Demonstration RD ampersand D Priorities'' indicated that in the 1990s the highest research priority should be for natural gas utilization and that technology development efforts should not only address efficiency and cost, but environmental and regulatory issues as well. This study and others, such as the report by the American Gas Association (A.G.A.) entitled ''Strategic Vision for Natural Gas Through the Year 2000,'' clearly identify the market sectors driving today's technology development needs. The biggest driver is the power generation market followed by the industrial, transportation, appliance, and gas cooling markets. This is best illustrated by the GRI 1994 Baseline Projection on market growth in various sectors between the year 1992 and 2010. This paper highlights some of the recent technology developments in each one of these sectors

The Effect of Using Video Technology on Improving Reading Comprehension of Iranian Intermediate EFL Learners

Directory of Open Access Journals (Sweden)

Amir Mohammadian

2018-04-01

Full Text Available With the development of educational technology, the concept of technology-enhanced multimedia instructions is using widely in the educational settings. Technology can be employed in teaching different skills such as listening, reading, speaking and writing. Among these skills, reading comprehension is the skill in which EFL learners have some problems to master. Regarding this issue, the present study aimed at investigating the effect of video materials on improving reading comprehension of Iranian intermediate EFL learners. A Longman Placement Test was administered to 30 EFL learners to ensure that learners are at the same level of proficiency. The students were chosen from the state high schools in Chabahar.  The participants were regarded as intermediate learners and were divided into two groups (one experimental group and one control group. Then, a pre-test of reading comprehension was administered to assess the participants’ reading comprehension. The participants of experimental group used video files to improve their reading comprehension while the control group received conventional approaches of teaching reading comprehension. Finally, all the participants were assigned a 40-item multiple-choice reading comprehension post-test. The results of the study indicated that video materials had a significant effect on promoting reading comprehension of Iranian intermediate EFL learners (p = .000, <.05.

Comprehensive Smart Grid Planning in a Regulated Utility Environment

Science.gov (United States)

Turner, Matthew; Liao, Yuan; Du, Yan

2015-06-01

This paper presents the tools and exercises used during the Kentucky Smart Grid Roadmap Initiative in a collaborative electric grid planning process involving state regulators, public utilities, academic institutions, and private interest groups. The mandate of the initiative was to assess the existing condition of smart grid deployments in Kentucky, to enhance understanding of smart grid concepts by stakeholders, and to develop a roadmap for the deployment of smart grid technologies by the jurisdictional utilities of Kentucky. Through involvement of many important stakeholder groups, the resultant Smart Grid Deployment Roadmap proposes an aggressive yet achievable strategy and timetable designed to promote enhanced availability, security, efficiency, reliability, affordability, sustainability and safety of the electricity supply throughout the state while maintaining Kentucky's nationally competitive electricity rates. The models and methods developed for this exercise can be utilized as a systematic process for the planning of coordinated smart grid deployments.

Report on the results of the FY 1998 hydrogen utilization international clean energy system technology (WE-NET). Subtask 1. Survey/research for the comprehensive evaluation and developmental plan; 1998 nendo suiso riyo kokusai clean energy system gijutsu (WE-NET). 1. Sogo hyoka to kaihatsu keikaku no tame no chosa kenkyu

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-03-01

The paper described the results of the FY 1998 WE-NET project survey. WE-NET is composed of various element technologies such as hydrogen production, hydrogen transportation, storage technology, low-temperature materials, hydrogen utilization, and hydrogen combustion turbine technology. Therefore, considering the effectiveness as a total system, it is extremely important to traversally evaluate the situation of the R and D of each technology and developmental achievements and to work out developmental plans with integration, considering the effectiveness as a total system. From viewpoints of making effective promotion of the project and attempting optimization as a total system, it is necessary to make organic/comprehensive connection and adjustment among individual subtasks all the time. In this survey/research, in the case of proceeding with the above-mentioned studies, a committee having knowledgeable persons and learned persons as members was established. There, an investigational study was conducted over the whole WE-NET structural technology, and at the same time the following were attempted: the constant/mobile comprehensive adjustment of the whole project, evaluation of the developmental results, and optimization of the developmental plans. The results obtained in 6 years of Period I were evaluated traversally and comprehensively, and how to proceed with the development in Period II was proposed, which showed the developmental continuity. (NEDO)

Electric utility report '80

International Nuclear Information System (INIS)

Anon.

1980-01-01

A collection of brief atricles describes the trends and developments in Canada's electric utilities for the 1980's. Generating stations planned or under construction are listed. The trends in technology discused at a recent Canadian Electrical Association meeting are summarized in such areas as turbine stability control, power line vibration control, system reliability, substations and transformer specifications. Developments in nuclear generation are discussed and compared on the world scale where Japan, for example, has the world's largest nuclear program. Progress on fusion is discussed. In Canada the electric utilities are receiving the support of the comprehensive nuclear R and D program of Atomic Energy of Canada Ltd. New innovations in utility technology such as street lighting contactors, superconductive fault limiters and demand profile analyzers are discussed. (T.I.)

Life-cycle energy production and emissions mitigation by comprehensive biogas-digestate utilization.

Science.gov (United States)

Chen, Shaoqing; Chen, Bin; Song, Dan

2012-06-01

In the context of global energy shortages and climate change, developing biogas plants with links to agricultural system has become an important strategy for cleaner rural energy and renewable agriculture. In this study, a life-cycle energy and environmental assessment was performed for a biogas-digestate utilization system in China. The results suggest that biogas utilization (heating, illumination, and fuel) and comprehensive digestate reuse are of equal importance in the total energy production of the system, and they also play an important role in systemic greenhouse gas mitigation. Improvement can be achieved in both energy production and emissions mitigation when the ratio of the current three biogas utilization pathways is adjusted. Regarding digestate reuse, a tradeoff between energy and environmental performance can be obtained by focusing on the substitution for top-dressing, base fertilizers, and the application to seed soaking. Copyright © 2012 Elsevier Ltd. All rights reserved.

Utilization of OR method toward realization of better fast breeder reactor cycle

International Nuclear Information System (INIS)

Shiotani, Hiroki

2008-01-01

Fast Reactor Cycle Technology Development (FaCT) Project was now started aiming at commercialization of new nuclear power plants system. In parallel with development of component technology and technology demonstration by test, development of comprehensive evaluation method of the FBR cycle system is under way and scenario study, discounted cash flow (DCF) method, analytic hierarchy process (AHP), real option, supply chain management (SCM) and others are used. Since commercialized FBR cycle would request long-term and large-scale development contributed by so many participants, modeling of nuclear system and knowledge management are beneficial even for development of evaluation method and further utilization of OR technology is highly expected. Comprehensive evaluation methods now utilized or developing were overlooked from the standpoint of OR, 'Science of Better'. (T. Tanaka)

Establishment of comprehensive promotion plan for utilization, research and development of radiation and radioisotopes

International Nuclear Information System (INIS)

Choi, Young Myung; Kim, H. J.; Ham, C. H.; Yang, M. H.; Chung, W. S.; Park, K. B.; Jin, J. H.; Song, H. S.; Nho, Y. C.; Byun, M. W.; Kim, J. R.; Han, H. S.; Chung, Y. S.; Yun, P. M.; Lee, H. Y.; Seo, K. W.; Chang, S. Y.; Kee, S. R.; Lhu, S. R.; Choi, Y. S.

1997-05-01

This study surveys state-of-art radiation/RI industries and research organizations and their activities. The major objective of the survey is to collect useful information on the status of these industries, discuss issues concerning radiation /RI utilization. We, therefore, send questionnaires to field workers engaged in RI industries and research organizations to feedback on real field issues and problems. Considering the specificity and diversity of the radiation / RI area, six sectors are set up for its promotion. Each sector includes status analysis, active promotion measures and implementation plans. Six areas are as follows; 1) systematic developments of radiation /RI utilization technologies covers technology development for industrial applications, technology development for agricultural applications, technology development for medical applications, development of RI and radiation generators, and expansion of infra-structure for enhancement of radiation / RI utilization, and fostering radiation science. 2) activation of radiation / RI indusries 3) rationalization of radiation / RI regulation 4) international cooperation, 5) manpower development 6) finance. (author). 14 refs., 34 tabs., 5 figs

Advanced clean coal utilization technologies

Energy Technology Data Exchange (ETDEWEB)

Moritomi, Hiroshi [National Inst. for Resources and Environment, Tsukuba, Ibaraki (Japan)

1993-12-31

The most important greenhouse gas is CO{sub 2} from coal utilization. Ways of mitigating CO{sub 2} emissions include the use of alternative fuels, using renewable resources and increasing the efficiency of power generation and end use. Adding to such greenhouse gas mitigation technologies, post combustion control by removing CO{sub 2} from power station flue gases and then storing or disposing it will be available. Although the post combustion control have to be evaluated in a systematic manner relating them to whether they are presently available technology, to be available in the near future or long term prospects requiring considerable development, it is considered to be a less promising option owing to the high cost and energy penalty. By contrast, abatement technologies aimed at improving conversion efficiency or reducing energy consumption will reduce emissions while having their own commercial justification.

Implementation digital technologies in nuclear utilities

Energy Technology Data Exchange (ETDEWEB)

Wiegand, C.; Maselli, A.J., E-mail: Tony.Maselli@Invensys.com [Invensys Operations Management, London (United Kingdom)

2012-07-01

The introduction of digital technologies into the nuclear industry has assisted in many ways and made many of the Life Extensions and Uprates a possibility. But with this introduction of digital technologies comes some potentially challenging issues which need to be addressed for ultimate project success. This presentation discusses what a nuclear utility should consider and establish when implementing digital technologies in their plant. Digital technologies have been employed in many safety critical industries such as Aerospace, Pharmaceutical, Oil and Gas, and Chemical. However, nuclear industry implementation of digital technologies has been slow and in many ways tenuous. There are even documented operating experience events in which plant trips/SCRAMs occurred during a digital system implementation. This presentation aims to prevent those issues drawing upon the lessons learned over the past 5 years. Considerations include general challenges to overcome when implementing Digital Technologies, how to justify and execute projects, evaluation of resource knowledge, and the new challenges of Cyber Security. (author)

Implementation digital technologies in nuclear utilities

International Nuclear Information System (INIS)

Wiegand, C.; Maselli, A.J.

2012-01-01

The introduction of digital technologies into the nuclear industry has assisted in many ways and made many of the Life Extensions and Uprates a possibility. But with this introduction of digital technologies comes some potentially challenging issues which need to be addressed for ultimate project success. This presentation discusses what a nuclear utility should consider and establish when implementing digital technologies in their plant. Digital technologies have been employed in many safety critical industries such as Aerospace, Pharmaceutical, Oil and Gas, and Chemical. However, nuclear industry implementation of digital technologies has been slow and in many ways tenuous. There are even documented operating experience events in which plant trips/SCRAMs occurred during a digital system implementation. This presentation aims to prevent those issues drawing upon the lessons learned over the past 5 years. Considerations include general challenges to overcome when implementing Digital Technologies, how to justify and execute projects, evaluation of resource knowledge, and the new challenges of Cyber Security. (author)

Determination of natural radionuclide level in industrial waste slags and evaluation of comprehensive utilization

International Nuclear Information System (INIS)

Li Ruixiang; Liu Xinhua; Gan Lin

1994-09-01

Natural radionuclide contents were measured in various industrial waste slags in China by a low background HPGe γ spectrometer and the radiological impact was estimated for some comprehensive utilization of these slags. Most waste slags can be used for building materials except for tailing and waste rock form nuclear industry

Sustainable Technology and Business Innovation Framework – A Comprehensive Approach

Directory of Open Access Journals (Sweden)

Maja Levi Jakšić

2018-05-01

Full Text Available Despite of the rising awareness of the urgency in finding more efficient and effective ways to achieve sustainable development, comprehensive and consistent meaning is still elusive both in theory and practice. The aim of this paper is to create a more structured theoretical framework related to macro and micro perspectives of sustainable development, relevant also to enhancing sustainable practices. We here propose a comprehensive framework model for structuring multiple sustainability principles and practices, detected in the literature as different sustainability categories related to both macro and micro perspectives of sustainability in the economy and society. The focus is on relevant sustainability principles of technology and business innovation in relation to basic technology and business innovation models as a contribution to less investigated theoretical aspects of sustainable business development. We developed a set of related matrices indicating the relevant roles and relationships between these principles in achieving sustainable business goals related to sustainable economy dimensions. Finally, the paper shows that the proposed Related Matrices Framework fulfils the main objective set in the initial research stages, i.e. to be of both theoretical and practical relevance. As a contribution to the theory it meets the need of building a structured, integrated, comprehensive model that serves the needs of better understanding different sustainability of macro and micro categories, indicating mutual relations and influences. In a practical sense, it can be used as a tool to support the management of change in companies oriented at achieving sustainable business goals based on sustainable technology and business innovation.

Strategic rigidity and foresight for technology adoption among electric utilities

International Nuclear Information System (INIS)

Shah, Arsalan Nisar; Palacios, Miguel; Ruiz, Felipe

2013-01-01

The variation in the adoption of a technology as a major source of competitive advantage has been attributed to the wide-ranging strategic foresight and the integrative capability of a firm. These possible areas of competitive advantage can exist in the periphery of the firm's strategic vision and can get easily blurred as a result of rigidness and can permeate in the decision-making process of the firm. This article explores how electric utility firms with a renewable energy portfolio can become strategically rigid in terms of adoption of newer technologies. The reluctance or delay in the adoption of new technology can be characterized as strategic rigidness, brought upon as a result of a firm's core competence or core capability in the other, more conventional technology arrangement. This paper explores the implications of such rigidness on the performance of a firm and consequently on the energy eco-system. The paper substantiates the results by emphasizing the case of Iberdrola S.A., an incumbent firm as a wind energy developer and its adoption decision behavior. We illustrate that the very routines that create competitive advantage for firms in the electric utility industry are vulnerable as they might also develop as sources of competitive disadvantage, when firms confront environmental change and uncertainty. - Highlights: • Present a firm-level perspective on technology adoption behavior among electric utilities. • Firms with mature technology can become rigid towards newer technologies. • Case study analysis of a major electric utility firm. • Implications of ‘technology rigidness’ on the energy eco-system

Intelligent products for enhancing the utilization of tracking technology in transportation

NARCIS (Netherlands)

Meyer, Gerben G.; Buijs, Paul; Szirbik, Nick B.; Wortmann, J.C.

2014-01-01

Purpose – Many transportation companies struggle to effectively utilize the information provided by tracking technology for performing operational control. The research as presented in this paper aims to identify the problems underlying the inability to utilize tracking technology within this

NASA technology utilization program: The small business market

Science.gov (United States)

Vannoy, J. K.; Garcia-Otero, F.; Johnson, F. D.; Staskin, E.

1980-01-01

Technology transfer programs were studied to determine how they might be more useful to the small business community. The status, needs, and technology use patterns of small firms are reported. Small business problems and failures are considered. Innovation, capitalization, R and D, and market share problems are discussed. Pocket, captive, and new markets are summarized. Small manufacturers and technology acquisition are discussed, covering external and internal sources, and NASA technology. Small business and the technology utilization program are discussed, covering publications and industrial applications centers. Observations and recommendations include small business market development and contracting, and NASA management technology.

Utilizing GIS to Examine the Relationship Between State Renewable Portfolio Standards and the Adoption of Renewable Energy Technologies

Directory of Open Access Journals (Sweden)

Chelsea Schelly

2013-12-01

Full Text Available In the United States, there is no comprehensive energy policy at the federal level. To address issues as diverse as climate change, energy security, and economic development, individual states have increasingly implemented Renewable Portfolio Standards (RPSs, which mandate that utility providers include a specified amount of electricity from renewable energy sources in their total energy portfolios. Some states have included incentives for individual energy technologies in their RPS, such as solar electric (also called photovoltaic or PV technology. Here, we use GIS to visualize adoption of RPSs and electricity generation from renewable energy sources in the US and examine changes in renewable electricity and solar electric generation over time with the goal of informing future policies aimed at promoting the adoption of renewable energy technologies.

university students` perception and utilization of technology

African Journals Online (AJOL)

2018-02-01

Feb 1, 2018 ... university students` perceptions and utilization of technology for learning at Haramaya University in. Ethiopia (as a ... teaching and learning in classroom can greatly enhance the ..... benefits that it should be deliver. Looking at ...

Long-Term Monitoring of Utility-Scale Solar Energy Development and Application of Remote Sensing Technologies: Summary Report

Energy Technology Data Exchange (ETDEWEB)

Hamada, Yuki [Argonne National Lab. (ANL), Argonne, IL (United States). Environmental Science Division; Grippo, Mark A. [Argonne National Lab. (ANL), Argonne, IL (United States). Environmental Science Division; Smith, Karen P. [Argonne National Lab. (ANL), Argonne, IL (United States). Environmental Science Division

2014-09-30

In anticipation of increased utility-scale solar energy development over the next 20 to 50 years, federal agencies and other organizations have identified a need to develop comprehensive long-term monitoring programs specific to solar energy development. Increasingly, stakeholders are requesting that federal agencies, such as the U.S. Department of the Interior Bureau of Land Management (BLM), develop rigorous and comprehensive long-term monitoring programs. Argonne National Laboratory (Argonne) is assisting the BLM in developing an effective long-term monitoring plan as required by the BLM Solar Energy Program to study the environmental effects of solar energy development. The monitoring data can be used to protect land resources from harmful development practices while at the same time reducing restrictions on utility-scale solar energy development that are determined to be unnecessary. The development of a long-term monitoring plan that incorporates regional datasets, prioritizes requirements in the context of landscape-scale conditions and trends, and integrates cost-effective data collection methods (such as remote sensing technologies) will translate into lower monitoring costs and increased certainty for solar developers regarding requirements for developing projects on public lands. This outcome will support U.S. Department of Energy (DOE) Sunshot Program goals. For this reason, the DOE provided funding for the work presented in this report.

Impacts of Captioned Movies on Listening Comprehension

Directory of Open Access Journals (Sweden)

Abusaied Janfaza

2014-04-01

Full Text Available With the advent of technology, the implication of authentic multimedia-based teaching materials are using widely in language classrooms. Technology can be in service of teaching different skills such as listening, reading, speaking and writing. Among these skills listening comprehension is a skill in which the learners have problems to master. Regarding this issue, utilizing captions for the education purposes has been a good motivation for conducting some research on the effects of captions of listening skills. However, it seems that there is a gap in the literature whether to use captioned movies in the classroom and whether they are effective in improving listening comprehension. Many studies have been conducted on this issue. However, their findings are conclusive. While some studies refer to the effectiveness of using captions, others revel that they are not so effective for improving the learner’s language skills. Hence, the present study is a review of the effects of captioned movies on the improvement of listening skill. In this case, the findings of this study can clarify the role of using captioned movies in improving the listening skill Keywords: captioned movie, technology, listening comprehension, instruction

Awarensss and utilization of information technology among ...

African Journals Online (AJOL)

The paper examines the awareness and utilization of Information Technologies among Agricultural scientists in Nigeria. Data were collected from 170 respondents with the aid of structured questionnaire and analysed using frequency, percentage, mean and Ordinary Least Square multiple regression. This study found that ...

Design of Agricultural Cleaner Production Technology System

OpenAIRE

Hu, Jun-mei; Wang, Xin-jie

2009-01-01

Based on the introduction of agricultural cleaner production, technology system design of planting cleaner production is discussed from five aspects of water-saving irrigation technology, fertilization technology, diseases and insects control technology, straw comprehensive utilization technology and plastic film pollution control technology. Cleaner production technology system of livestock and poultry raise is constructed from the aspects of source control technology, reduction technique in...

Endogenous technological change with leisure-dependent utility.

NARCIS (Netherlands)

Hek, de P.A.

1999-01-01

This paper investigates the effect of introducing leisure-dependent utility into two models of endogenous technological change. Due to the flexibility in the labour supply the dynamics of the models change significantly. It is shown that if agents attach enough value to leisure in comparison to

Utilization of cocoyam production technologies among women ...

African Journals Online (AJOL)

The study analysed utilization of improved cocoyam production technologies among women in Abia State, Nigeria. A multistage random sampling technique was used to select sixty (60) women. Data for the study were collected using a structured questionnaire and analysed with descriptive statistics and inferential statistics ...

ASSESSMENT TECHNIQUES OF ENGLISH READING COMPREHENSION MEDIATED BY TECHNOLOGIES TO IMPROVE COLLEGE STUDENT’S ACHIEVEMENT.

OpenAIRE

Ochoa-Vásquez, Miguel A.; Ramírez-Montoya, María S.

2016-01-01

Improving reading comprehension skills is fundamental to those students willing to enroll in undergraduate studies. This sequential-explanatory mixed methods research design attempted to measure the impact that English reading comprehension assessment had on 96 college students’ school performance, after receiving a 15-hour instruction on reading evaluating techniques in technological-enriched environments. The data was collected through reading comprehension pre/post-tests and a semi-structu...

Technology developments for Japanese BWR MOX fuel utilization

International Nuclear Information System (INIS)

Oguma, M.; Mochida, T.; Nomata, T.; Asahi, K.

1997-01-01

The Long-Term Program for Research, Development and Utilization of Nuclear Energy established by the Atomic Energy Commission of Japan asserts that Japan will promote systematic utilization of MOX fuel in LWRs. Based on this Japanese nuclear energy policy, we have been pushing development of MOX fuel technology aimed at future full scale utilization of this fuel in BWRs. In this paper, the main R and D topics are described from three subject areas, MOX core and fuel design, MOX fuel irradiation behaviour, and MOX fuel fabrication technology. For the first area, we explain the compatibility of MOX fuel with UO 2 core, the feasibility of the full MOX core, and the adaptability of MOX design methods based on a mock-up criticality experiment. In the second, we outline the Tsuruga MOX irradiation program and the DOMO program, and suggest that MOX fuel behaviour is comparable to ordinary BWR UO 2 fuel behaviour. In the third, we examine the development of a fully automated MOX bundle assembling apparatus and its features. (author). 14 refs, 11 figs, 3 tabs

Perspectives and utilization technologies of chicory ( Cichorium ...

African Journals Online (AJOL)

Exploring and developing multiple utility technologies of plant resources is an alternative way for improving the efficiency of land used for food and fuel production. Chicory (Cichorium intybus L.) has a nutritional quality comparable to lucerne as it contains similar proportions of protein, lipid, minerals and other nutrients.

Development of beam utilization/application technology

Energy Technology Data Exchange (ETDEWEB)

Choi, B H; Kim, Y K; Song, T Y [and others

1999-05-01

High power proton accelerator is considered as one of national fundamental research facilities and a key to advanced nuclear technology development, having been widely used in an un detachable relationship with nuclear research in advanced countries. The high power proton accelerator will be installed in several phases as an up front facility of the nuclear waste transmutation system. It is expected that a common understanding and a general agreement over proper utilization of the accelerator should be deduced and that a user program for beam utilization and application should be firmly established in time for the completion of each phase of the accelerator. This high power proton accelerator will consist of several component accelerators and, from up front, accelerators such as injector, RFQ, CCDTL, etc. will be installed in sequence and deliver respectively at each stage beams of 3MeV, 20MeV, 100Mev, etc. to be variously utilized forindustries, defence industry, medical treatment, environmental protection and basic science research. In order for the accelerator to be fully utilized as a national fundamental research facility beyond nuclear field, it is necessary to formulate a proceeding plan of the user program for the accelerator and to cultivate industrial utilization/application studies of proton beams accelerated by injector or RFQ of the accelerator. (author). 38 refs., 84 tabs., 39 figs.

Development of beam utilization/application technology

International Nuclear Information System (INIS)

Choi, B. H.; Kim, Y.K.; Song, T.Y.

1999-05-01

High power proton accelerator is considered as one of national fundamental research facilities and a key to advanced nuclear technology development, having been widely used in an un detachable relationship with nuclear research in advanced countries. The high power proton accelerator will be installed in several phases as an up front facility of the nuclear waste transmutation system. It is expected that a common understanding and a general agreement over proper utilization of the accelerator should be deduced and that a user program for beam utilization and application should be firmly established in time for the completion of each phase of the accelerator. This high power proton accelerator will consist of several component accelerators and, from up front, accelerators such as injector, RFQ, CCDTL, etc. will be installed in sequence and deliver respectively at each stage beams of 3MeV, 20MeV, 100Mev, etc. to be variously utilized for industries, defence industry, medical treatment, environmental protection and basic science research. In order for the accelerator to be fully utilized as a national fundamental research facility beyond nuclear field, it is necessary to formulate a proceeding plan of the user program for the accelerator and to cultivate industrial utilization/application studies of proton beams accelerated by injector or RFQ of the accelerator. (author). 38 refs., 84 tabs., 39 figs

Biomass torrefaction: A promising pretreatment technology for biomass utilization

Science.gov (United States)

Chen, ZhiWen; Wang, Mingfeng; Ren, Yongzhi; Jiang, Enchen; Jiang, Yang; Li, Weizhen

2018-02-01

Torrefaction is an emerging technology also called mild pyrolysis, which has been explored for the pretreatment of biomass to make the biomass more favorable for further utilization. Dry torrefaction (DT) is a pretreatment of biomass in the absence of oxygen under atmospheric pressure and in a temperature range of 200-300 degrees C, while wet torrrefaction (WT) is a method in hydrothermal or hot and high pressure water at the tempertures within 180-260 degrees C. Torrrefied biomass is hydrophobic, with lower moisture contents, increased energy density and higher heating value, which are more comparable to the characteristics of coal. With the improvement in the properties, torrefied biomass mainly has three potential applications: combustion or co-firing, pelletization and gasification. Generally, the torrefaction technology can accelerate the development of biomass utilization technology and finally realize the maximum applications of biomass energy.

Energy conversion and utilization technologies

International Nuclear Information System (INIS)

1988-01-01

The DOE Energy Conversion and Utilization Technologies (ECUT) Program continues its efforts to expand the generic knowledge base in emerging technological areas that support energy conservation initiatives by both the DOE end-use sector programs and US private industry. ECUT addresses specific problems associated with the efficiency limits and capabilities to use alternative fuels in energy conversion and end-use. Research is aimed at understanding and improving techniques, processes, and materials that push the thermodynamic efficiency of energy conversion and usage beyond the state of the art. Research programs cover the following areas: combustion, thermal sciences, materials, catalysis and biocatalysis, and tribology. Six sections describe the status of direct contact heat exchange; the ECUT biocatalysis project; a computerized tribology information system; ceramic surface modification; simulation of internal combustion engine processes; and materials-by-design. These six sections have been indexed separately for inclusion on the database. (CK)

THE ANALYSIS OF THE COMPREHENSIVE INSURANCE DEMAND FOR TURKEY USING UTILITY THEORY AND SYSTEM SIMULATION

Directory of Open Access Journals (Sweden)

Murat KIRKAĞAÇ

2017-03-01

Full Text Available In this study, the demand for comprehensive insurance is analysed using utility theory and system simulation. A simulation study is performed to assess the behaviour of individuals with different income levels for the demand of comprehensive insurance. Simulation assumptions and input-output variables are determined using the real data set from a Turkish insurance company and the report about the insurance activities in Turkey for year 2014. The effects of income level, expected claim severity and premium level on the demand for insurance are investigated. It is concluded that while an increase in income level and expected claim severity causes an increase in the demand, an increase in premium level causes a decrease in the demand.

NASA technology utilization applications. [transfer of medical sciences

Science.gov (United States)

1973-01-01

The work is reported from September 1972 through August 1973 by the Technology Applications Group of the Science Communication Division (SCD), formerly the Biological Sciences Communication Project (BSCP) in the Department of Medical and Public Affairs of the George Washington University. The work was supportive of many aspects of the NASA Technology Utilization program but in particular those dealing with Biomedical and Technology Application Teams, Applications Engineering projects, new technology reporting and documentation and transfer activities. Of particular interest are detailed reports on the progress of various hardware projects, and suggestions and criteria for the evaluation of candidate hardware projects. Finally some observations about the future expansion of the TU program are offered.

Development of Beam Utilization Technologies and Support for Users

International Nuclear Information System (INIS)

Kim, Kyeryung; Jung, Myunghwan; Noh, Yongoh; Lee, Sooyeon; Kim, Hyukwook; Kil, Jaekeun; Lee, Nayoung; Ra, Sekin; Lee, Miejeen; Kim, Sora

2013-02-01

The Final goals are to achieve the 2nd goals of the Proton Engineering Frontier Project, development of proton beam utilization technologies, to incubate the potential users, and to develop fundamental technologies. Based on these achievements, we are going to enhance the accelerator utilization and maximize contribution to the local society after accelerator construction completion. For the these goals, we were operating user program reflecting the results of 3rd step planning. We support 38 small projects during 2 years. As results of activation of beam utilization, we acquired 768 users at the end of 2012. We survey proton beam technology proposals, individuals and institutions participation letter of intent through the research of 'Planning of a support program for both basic research by using accelerator and manpower cultivation'. And inaugurated KOPUA (Korea Proton Accelerator User Association) on March 28, 2012 with 152 members. We secured experimental conditions at TR23 and TR103 and reflected in the target room design and operation scenarios via investigate the requirements. Through these requirements, we make a remote sample transfer system, beam regulating system, hot cell and sample transport container. Moreover, we develop proton beam technologies such as in-vivo proton beam irradiation system, comparison of the biological effects for pulse beam and continuous beam, basic experiments for the metal nanopaticle synthesis, research for radioactivatied samples and devices, conceptual design and calculation for neutron source target and calculation of the isotope production yield. Proton accelerator can be utilized in a variety of field, including NT, BT, IT, ST, ET, Nuclear, medical, and some of the user facilities required were constructed through this project, Experience for the construction and operation of these facilities can be reflected to the construction of the rest 8 target room of proton accelerator center

Utilization of biogas

Energy Technology Data Exchange (ETDEWEB)

Walsh, J L; Ross, C C; Smith, M S; Harper, S R [Georgia Tech Research Corp., Atlanta, GA (USA)

1989-01-01

A comprehensive study of the systems and equipment required to convert biogas into useful thermal and/or electrical energy was conducted, and the results published in the Handbook on Biogas Utilization (Walsh et al., Georgia Institute of Technology, Atlanta, GA, 1988). The physical, chemical and combustion characteristics of biogas, and the impact of these characteristics on both new and modified combustion equipment, were considered. The study also included consideration of auxiliary equipment for biogas collection, clean-up, compression and storage. (author).

Formalization and Interaction: Toward a Comprehensive History of Technology-Related Knowledge in Early Modern Europe.

Science.gov (United States)

Popplow, Marcus

2015-12-01

Recent critical approaches to what has conventionally been described as "scientific" and "technical" knowledge in early modern Europe have provided a wealth of new insights. So far, the various analytical concepts suggested by these studies have not yet been comprehensively discussed. The present essay argues that such comprehensive approaches might prove of special value for long-term and cross-cultural reflections on technology-related knowledge. As heuristic tools, the notions of "formalization" and "interaction" are proposed as part of alternative narratives to those highlighting the emergence of "science" as the most relevant development for technology-related knowledge in early modern Europe.

Utilizing Internet Technologies in Observatory Control Systems

Science.gov (United States)

Cording, Dean

2002-12-01

The 'Internet boom' of the past few years has spurred the development of a number of technologies to provide services such as secure communications, reliable messaging, information publishing and application distribution for commercial applications. Over the same period, a new generation of computer languages have also developed to provide object oriented design and development, improved reliability, and cross platform compatibility. Whilst the business models of the 'dot.com' era proved to be largely unviable, the technologies that they were based upon have survived and have matured to the point were they can now be utilized to build secure, robust and complete observatory control control systems. This paper will describe how Electro Optic Systems has utilized these technologies in the development of its third generation Robotic Observatory Control System (ROCS). ROCS provides an extremely flexible configuration capability within a control system structure to provide truly autonomous robotic observatory operation including observation scheduling. ROCS was built using Internet technologies such as Java, Java Messaging Service (JMS), Lightweight Directory Access Protocol (LDAP), Secure Sockets Layer (SSL), eXtendible Markup Language (XML), Hypertext Transport Protocol (HTTP) and Java WebStart. ROCS was designed to be capable of controlling all aspects of an observatory and be able to be reconfigured to handle changing equipment configurations or user requirements without the need for an expert computer programmer. ROCS consists of many small components, each designed to perform a specific task, with the configuration of the system specified using a simple meta language. The use of small components facilitates testing and makes it possible to prove that the system is correct.

Effects of Technology-Based Teacher Training and Teacher-Led Classroom Implementation on Learning Reading Comprehension Strategies

OpenAIRE

Graves, Michael; Sales, Gregory C.; Lawrenz, Frances; Robelia, Beth; Richardson, Jayson W.

2010-01-01

This study examined the effectiveness of a professionally developed comprehensive reading comprehension strategies program when compared to traditional reading comprehension instruction presented to 865 fourth and fifth graders (682 with full data sets) in 34 classrooms in the United States. The treatment included a strong, technology-based teacher training component as well as highly motivational materials for 53 classroom-delivered student lessons. The research design was a randomized tria...

Factors shaping effective utilization of health information technology in urban safety-net clinics.

Science.gov (United States)

George, Sheba; Garth, Belinda; Fish, Allison; Baker, Richard

2013-09-01

Urban safety-net clinics are considered prime targets for the adoption of health information technology innovations; however, little is known about their utilization in such safety-net settings. Current scholarship provides limited guidance on the implementation of health information technology into safety-net settings as it typically assumes that adopting institutions have sufficient basic resources. This study addresses this gap by exploring the unique challenges urban resource-poor safety-net clinics must consider when adopting and utilizing health information technology. In-depth interviews (N = 15) were used with key stakeholders (clinic chief executive officers, medical directors, nursing directors, chief financial officers, and information technology directors) from staff at four clinics to explore (a) nonhealth information technology-related clinic needs, (b) how health information technology may provide solutions, and (c) perceptions of and experiences with health information technology. Participants identified several challenges, some of which appear amenable to health information technology solutions. Also identified were requirements for effective utilization of health information technology including physical infrastructural improvements, funding for equipment/training, creation of user groups to share health information technology knowledge/experiences, and specially tailored electronic billing guidelines. We found that despite the potential benefit that can be derived from health information technologies, the unplanned and uninformed introduction of these tools into these settings might actually create more problems than are solved. From these data, we were able to identify a set of factors that should be considered when integrating health information technology into the existing workflows of low-resourced urban safety-net clinics in order to maximize their utilization and enhance the quality of health care in such settings.

Appraisal of the Availability and Utilization of New Technological ...

African Journals Online (AJOL)

FIRST LADY

Items 31 - 36 ... instrument was a 36-item questionnaire developed by the researchers. The ... Nigeria utilize new technological resources in science curriculum delivery. ... science instructions makes learning of science concepts clearer to.

Energy technologies for distributed utility applications: Cost and performance trends, and implications for photovoltaics

International Nuclear Information System (INIS)

Eyer, J.M.

1994-01-01

Utilities are evaluating several electric generation and storage (G ampersand S) technologies for distributed utility (DU) applications. Attributes of leading DU technologies and implications for photovoltaics (PV) are described. Included is a survey of present and projected cost and performance for: (1) small, advanced combustion turbines (CTs); (2) advanced, natural gas-fired, diesel engines (diesel engines); and (3) advanced lead-acid battery systems (batteries). Technology drivers and relative qualitative benefits are described. A levelized energy cost-based cost target for PV for DU applications is provided. The analysis addresses only relative cost, for PV and for three selected alternative DU technologies. Comparable size, utility, and benefits are assumed, although relative value is application-specific and often technology- and site-specific

Experimental study on comprehensive utilization of solar energy and energy balance in an integrated solar house

International Nuclear Information System (INIS)

Chang, Huawei; Liu, Yuting; Shen, Jinqiu; Xiang, Can; He, Sinian; Wan, Zhongmin; Jiang, Meng; Duan, Chen; Shu, Shuiming

2015-01-01

Highlights: • Active and passive solar house technology is integrated in the solar house. • Solar thermal system and solar photoelectric system are measured and analyzed. • Energy balance and energy consumption are analyzed with valuable experimental data. • “Zero energy consumption” is truly achieved with the solar supply rate of 1.19 in winter. - Abstract: An integrated solar house with numerous advanced envelops is designed and constructed to investigate the comprehensive utilization of solar energy, energy efficiency and energy balance, which combines active solar house technology with passive solar house technology including solar photovoltaic system, solar water heating system, direct-gain door and windows. Solar radiation intensity, performance of the photovoltaic system, water temperature, and indoor and outdoor temperature are measured, results of the experiments indicate that solar glass window on the south wall can maintain the average indoor temperature at 21.4 °C in the case of average outdoor temperature at 11.2 °C without any external heat supply. The output current of the solar photovoltaic system shows the same trend as solar radiation intensity. When the intensity is 619.7 W/m"2, the instantaneous generation power could reach a value of 781.9 W, cumulative capacity throughout the day achieves 4.56 kW h and photovoltaic conversion efficiency 9.8%. When the average intensity throughout a day is 358 W/m"2, the solar water heating system could help to raise the temperature of 450 L water by 30 °C with its heat collecting efficiency being 37.4%. Through the analysis of the overall energy system in the solar house, it can be derived that this solar house could achieve “zero energy consumption” in winter with the solar supply rate at 1.19.

Technology Assessment for Powertrain Components Final Report CRADA No. TC-1124-95

Energy Technology Data Exchange (ETDEWEB)

Tokarz, F. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Gough, C. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

2017-10-19

LLNL utilized its defense technology assessment methodologies in combination with its capabilities in the energy; manufacturing, and transportation technologies to demonstrate a methodology that synthesized available but incomplete information on advanced automotive technologies into a comprehensive framework.

News technology utilization fossil fuel

Directory of Open Access Journals (Sweden)

Blišanová Monika

2004-09-01

Full Text Available Fossil fuel – “alternative energy“ is coal, petroleum, natural gas. Petroleum and natural gas are scarce resources, but they are delimited. Reserves petroleum will be depleted after 39 years and reserves natural gas after 60 years.World reserves coal are good for another 240 years. Coal is the most abundant fossil fuel. It is the least expensive energy source for generating electricity. Many environmental problems associated with use of coal:in coal production, mining creates environmental problems.On Slovakia representative coal only important internal fuel – power of source and coal is produced in 5 locality. Nowadays, oneself invest to new technology on utilization coal. Perspective solution onself shows UCG, IGCC.

Utilization of sweetpotato based confection technology: A panacea ...

African Journals Online (AJOL)

Utilization of sweet potato-based confectionary was used as a step to reducing food crisis among women farmers in Imo state because of the health benefits, environmental friendliness and ability to make a home food secured with little investments. This is because such technology will help serve as an avenue to reduce ...

The Effect of Technology-Based Altered Readability Levels on Struggling Readers' Science Comprehension

Science.gov (United States)

Marino, Matthew T.; Coyne, Michael; Dunn, Michael

2010-01-01

This article reports findings from a study examining how altered readability levels affected struggling readers' (N = 288) comprehension of scientific concepts and vocabulary. Specifically, the researchers were interested in learning what effect altered readability levels have when low ability readers participate in a technology-based science…

Utility advanced turbine systems (ATS) technology readiness testing

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-09-15

The overall objective of the Advanced Turbine System (ATS) Phase 3 Cooperative Agreement between GE and the US Department of Energy (DOE) is the development of a highly efficient, environmentally superior, and cost-competitive utility ATS for base-load utility-scale power generation, the GE 7H (60 Hz) combined cycle power system, and related 9H (50 Hz) common technology. The major effort will be expended on detail design. Validation of critical components and technologies will be performed, including: hot gas path component testing, sub-scale compressor testing, steam purity test trials, and rotational heat transfer confirmation testing. Processes will be developed to support the manufacture of the first system, which was to have been sited and operated in Phase 4 but will now be sited and operated commercially by GE. This change has resulted from DOE's request to GE for deletion of Phase 4 in favor of a restructured Phase 3 (as Phase 3R) to include full speed, no load (FSNL) testing of the 7H gas turbine. Technology enhancements that are not required for the first machine design but will be critical for future ATS advances in performance, reliability, and costs will be initiated. Long-term tests of materials to confirm design life predictions will continue. A schematic of the GE H machine is shown.

The transfer of technologies for biomass energy utilization

International Nuclear Information System (INIS)

Schneiders, H.H.

1995-01-01

The first part of the paper presents the common perception of technology transfer as a trade relationship rather than a systematic approach to establish a complex technological capacity in a given field. It aims to correct this misperception by introducing some other ideas: (a) the need to support the people, adjust the relevant organizations and establish the capacities to provide the products and services; (b) the typical life cycles of technologies from the initial concept to the final stages of transfer and sustainable dissemination; (c) the needs and expectations of the groups targeted by the technologies for biomass energy utilization. The second part of the paper discusses one example of successful technology transfer: the use of large biomass-burning stoves for food preparation in public institutions and private restaurants in East Africa. The third part of the paper highlights two non-technological barriers to the transfer of biomass energy technologies: (a) weak market forces and business interests and a large number of State activities and projects and (b) conflicting interests of end-users, craftsmen, private and public project partners, which can threaten the success of the attempted technology transfer, even after local adaptation. Finally, suggestions are made for overcoming some of these problems. (author)

The transfer of technologies for biomass energy utilization

Energy Technology Data Exchange (ETDEWEB)

Schneiders, H H [German Agency for Technical Cooperation (GTZ), Eschborn (Germany)

1995-12-01

The first part of the paper presents the common perception of technology transfer as a trade relationship rather than a systematic approach to establish a complex technological capacity in a given field. It aims to correct this misperception by introducing some other ideas: (a) the need to support the people, adjust the relevant organizations and establish the capacities to provide the products and services; (b) the typical life cycles of technologies from the initial concept to the final stages of transfer and sustainable dissemination; (c) the needs and expectations of the groups targeted by the technologies for biomass energy utilization. The second part of the paper discusses one example of successful technology transfer: the use of large biomass-burning stoves for food preparation in public institutions and private restaurants in East Africa. The third part of the paper highlights two non-technological barriers to the transfer of biomass energy technologies: (a) weak market forces and business interests and a large number of State activities and projects and (b) conflicting interests of end-users, craftsmen, private and public project partners, which can threaten the success of the attempted technology transfer, even after local adaptation. Finally, suggestions are made for overcoming some of these problems. (author)

Image Sharing Technologies and Reduction of Imaging Utilization: A Systematic Review and Meta-analysis

Science.gov (United States)

Vest, Joshua R.; Jung, Hye-Young; Ostrovsky, Aaron; Das, Lala Tanmoy; McGinty, Geraldine B.

2016-01-01

Introduction Image sharing technologies may reduce unneeded imaging by improving provider access to imaging information. A systematic review and meta-analysis were conducted to summarize the impact of image sharing technologies on patient imaging utilization. Methods Quantitative evaluations of the effects of PACS, regional image exchange networks, interoperable electronic heath records, tools for importing physical media, and health information exchange systems on utilization were identified through a systematic review of the published and gray English-language literature (2004–2014). Outcomes, standard effect sizes (ESs), settings, technology, populations, and risk of bias were abstracted from each study. The impact of image sharing technologies was summarized with random-effects meta-analysis and meta-regression models. Results A total of 17 articles were included in the review, with a total of 42 different studies. Image sharing technology was associated with a significant decrease in repeat imaging (pooled effect size [ES] = −0.17; 95% confidence interval [CI] = [−0.25, −0.09]; P utilization (pooled ES = 0.20; 95% CI = [0.07, 0.32]; P = .002). For all outcomes combined, image sharing technology was not associated with utilization. Most studies were at risk for bias. Conclusions Image sharing technology was associated with reductions in repeat and unnecessary imaging, in both the overall literature and the most-rigorous studies. Stronger evidence is needed to further explore the role of specific technologies and their potential impact on various modalities, patient populations, and settings. PMID:26614882

Strategy for the Identification of an INL Comprehensive Utility Corridor

Energy Technology Data Exchange (ETDEWEB)

John Reisenauer

2011-05-01

This report documents the strategy developed to identify a comprehensive utility corridor (CUC) on the Idaho National Laboratory (INL) Site. The strategy established the process for which the Campus Development Office will evaluate land management issues. It is a process that uses geographical information system geospatial technology to layer critical INL mission information in a way that thorough evaluations can be conducted and strategies developed. The objective of the CUC Project was to develop a process that could be implemented to identify potential utility corridor options for consideration. The process had to take into account all the missions occurring on the INL and other land-related issues. The process for developing a CUC strategy consists of the following four basic elements using geographical information system capabilities: 1. Development of an INL base layer map; this base layer map geospatially references all stationary geographical features on INL and sitewide information. 2. Development of current and future mission land-use need maps; this involved working with each directorate to identify current mission land use needs and future land use needs that project 30 years into the future. 3. Development of restricted and potential constraint maps; this included geospatially mapping areas such as wells, contaminated areas, firing ranges, cultural areas, ecological areas, hunting areas, easement, and grazing areas. 4. Development of state highway and power line rights of way map; this included geospatially mapping rights-of-way along existing state highways and power lines running through the INL that support INL operations. It was determined after completing and evaluating the geospatial information that the area with the least impact to INL missions was around the perimeter of the INL Site. Option 1, in this document, identifies this perimeter; however, it does not mean the entire perimeter is viable. Many places along the perimeter corridor cannot

Trends in intensity modulated radiation therapy use for locally advanced rectal cancer at National Comprehensive Cancer Network centers

OpenAIRE

Marsha Reyngold, MD, PhD; Joyce Niland, PhD; Anna ter Veer, MS; Tanios Bekaii-Saab, MD; Lily Lai, MD; Joshua E. Meyer, MD; Steven J. Nurkin, MD, MS; Deborah Schrag, MD, MPH; John M. Skibber, MD, FACS; Al B. Benson, MD; Martin R. Weiser, MD; Christopher H. Crane, MD; Karyn A. Goodman, MD, MS

2018-01-01

Purpose: Intensity modulated radiation therapy (IMRT) has been rapidly incorporated into clinical practice because of its technological advantages over 3-dimensional conformal radiation therapy (CRT). We characterized trends in IMRT utilization in trimodality treatment of locally advanced rectal cancer at National Comprehensive Cancer Network cancer centers between 2005 and 2011. Methods and materials: Using the prospective National Comprehensive Cancer Network Colorectal Cancer Database, ...

Factors Relevant to Utility Integration of Intermittent Renewable Technologies

Energy Technology Data Exchange (ETDEWEB)

Wan, Y.; Parsons, B.

1993-08-24

This study assesses factors that utilities must address when they integrate intermittent renewable technologies into their power-supply systems; it also reviews the literature in this area and has a bibliography containing more than 350 listings. Three topics are covered: (1) interface (hardware and design-related interconnection), (2) operability/stability, and (3) planning. This study finds that several commonly held perceptions regarding integration of intermittent renewable energy technologies are not valid. Among fmdings of the study are the following: (1) hardware and system design advances have eliminated most concerns about interface, (2) cost penalties have not occurred at low to moderate penetration levels (and high levels am feasible); and (3) intermittent renewable energy technologies can have capacity values. Obstacles still interfering with intermittent renewable technologies are also indentified.

Factors relevant to utility integration of intermittent renewable technologies

Energy Technology Data Exchange (ETDEWEB)

Wan, Yih-huei; Parsons, B.K.

1993-08-01

This study assesses factors that utilities must address when they integrate intermittent renewable technologies into their power-supply systems; it also reviews the literature in this area and has a bibliography containing more than 350 listings. Three topics are covered: (1) interface (hardware and design-related interconnection), (2) operability/stability, and (3) planning. This study finds that several commonly held perceptions regarding integration of intermittent renewable energy technologies are not valid. Among findings of the study are the following: (1) hardware and system design advances have eliminated most concerns about interface; (2) cost penalties have not occurred at low to moderate penetration levels (and high levels are feasible); and (3) intermittent renewable energy technologies can have capacity values. Obstacles still interfering with intermittent renewable technologies are also identified.

Analysis and evaluation of the applicability of green energy technology

Science.gov (United States)

Xu, Z. J.; Song, Y. K.

2017-11-01

With the seriousness of environmental issues and the shortage of resources, the applicability of green energy technology has been paid more and more attention by scholars in different fields. However, the current researches are often single in perspective and simple in method. According to the Theory of Applicable Technology, this paper analyzes and defines the green energy technology and its applicability from the all-around perspectives of symbiosis of economy, society, environment and science & technology etc., and correspondingly constructs the evaluation index system. The paper further applies the Fuzzy Comprehensive Evaluation to the evaluation of its applicability, discusses in depth the evaluation models and methods, and explains in detail with an example. The author holds that the applicability of green energy technology involves many aspects of economy, society, environment and science & technology and can be evaluated comprehensively by an index system composed of a number of independent indexes. The evaluation is multi-object, multi-factor, multi-level and fuzzy comprehensive, which is undoubtedly correct, effective and feasible by the Fuzzy Comprehensive Evaluation. It is of vital theoretical and practical significance to understand and evaluate comprehensively the applicability of green energy technology for the rational development and utilization of green energy technology and for the better promotion of sustainable development of human and nature.

Using technology-enhanced, cooperative, group-project learning for student comprehension and academic performance

Science.gov (United States)

Tlhoaele, Malefyane; Suhre, Cor; Hofman, Adriaan

2016-05-01

Cooperative learning may improve students' motivation, understanding of course concepts, and academic performance. This study therefore enhanced a cooperative, group-project learning technique with technology resources to determine whether doing so improved students' deep learning and performance. A sample of 118 engineering students, randomly divided into two groups, participated in this study and provided data through questionnaires issued before and after the experiment. The results, obtained through analyses of variance and structural equation modelling, reveal that technology-enhanced, cooperative, group-project learning improves students' comprehension and academic performance.

Technology roadmap study on carbon capture, utilization and storage in China

International Nuclear Information System (INIS)

Zhang, Xian; Fan, Jing-Li; Wei, Yi-Ming

2013-01-01

Carbon capture, utilization and storage (CCUS) technology will likely become an important approach to reduce carbon dioxide (CO 2 ) emissions and optimize the structure of energy consumption in China in the future. In order to provide guidance and recommendations for CCUS Research, Development and Demonstration in China, a high level stakeholder workshop was held in Chongqing in June 2011 to develop a technology roadmap for the development of CCUS technology. This roadmap outlines the overall vision to provide technically viable and economically affordable technological options to combat climate change and facilitate socio-economic development in China. Based on this vision, milestone goals from 2010 to 2030 are set out in accordance with the technology development environment and current status in China. This study identifies the critical technologies in capture, transport, utilization and storage of CO 2 and proposes technical priorities in the different stages of each technical aspect by evaluating indices such as the objective contribution rate and technical maturity, and gives recommendations on deployment of full-chain CCUS demonstration projects. Policies which would support CCUS are also suggested in this study. - Highlights: • A technology roadmap for CCUS development in China from 2010 to 2030 is presented. • Sound data and analysis in combination with expert workshops are used. • Critical technologies in CCUS are identified. • Priority actions of all stages are identified and proposed. • Guidance and recommendations for CCUS RD and D are provided

Advanced fuel system technology for utilizing broadened property aircraft fuels

Science.gov (United States)

Reck, G. M.

1980-01-01

Possible changes in fuel properties are identified based on current trends and projections. The effect of those changes with respect to the aircraft fuel system are examined and some technological approaches to utilizing those fuels are described.

EPRI expert system activities for nuclear utility industry application

International Nuclear Information System (INIS)

Naser, J.A.

1990-01-01

This paper reports on expert systems which have reached a level of maturity where they offer considerable benefits for the nuclear utility industry. The ability of expert systems to enhance expertise makes them an important tool for the nuclear utility industry in the areas of engineering, operations and maintenance. Benefits of expert system applications include comprehensive and consistent reasoning, reduction of time required for activities, retention of human expertise and ability to utilize multiple experts knowledge for an activity. The Electric Power Research Institute (EPRI) has been performing four basic activities to help the nuclear industry take advantage of this expert system technology. The first is the development of expert system building tools which are tailored to nuclear utility industry applications. The second is the development of expert system applications. The third is work in developing a methodology for verification and validation of expert systems. The last is technology transfer activities to help the nuclear utility industry benefit from expert systems. The purpose of this paper is to describe the EPRI activities

Comprehensive brachytherapy physical and clinical aspects

CERN Document Server

Baltas, Dimos; Meigooni, Ali S; Hoskin, Peter J

2013-01-01

Modern brachytherapy is one of the most important oncological treatment modalities requiring an integrated approach that utilizes new technologies, advanced clinical imaging facilities, and a thorough understanding of the radiobiological effects on different tissues, the principles of physics, dosimetry techniques and protocols, and clinical expertise. A complete overview of the field, Comprehensive Brachytherapy: Physical and Clinical Aspects is a landmark publication, presenting a detailed account of the underlying physics, design, and implementation of the techniques, along with practical guidance for practitioners. Bridging the gap between research and application, this single source brings together the technological basis, radiation dosimetry, quality assurance, and fundamentals of brachytherapy. In addition, it presents discussion of the most recent clinical practice in brachytherapy including prostate, gynecology, breast, and other clinical treatment sites. Along with exploring new clinical protocols, ...

Spinoff 2002: Fortieth Anniversary Technology Utilization Program

Science.gov (United States)

2002-01-01

Since its inception 40 years ago, NASA's Technology Transfer Program has led the way for our nation to benefit from cutting-edge aerospace technologies. In addition to contributing to U.S. economic growth, these technologies are improving the quality of life on Earth while finding new ways to protect and preserve it. NASA's research and development efforts have advanced areas in medicine, communications, manufacturing, computer technology, and homeland security. These breakthroughs, translated into commercial products, are enhancing the lives of Americans everywhere. When a congressional mandate led NASA to develop the Scientific and Technical Information (STI) Program, the Agency began a wide dissemination of its research and development results. In doing so, NASA recognized that many of its technologies were transferable to industry for the development of commercial products. As a result, the Technology Utilization Program was born in 1962. The successful program went through several changes over the years, as its philosophy, mission, and goals adapted into the Technology Transfer Program we know today. The program strives to make the latest technologies available to industry as soon as they are developed. Each year, NASA's Spinoff publication showcases new products and services resulting from commercial partnerships between NASA and private industry. In the 2002 issue, the NASA field centers reflect upon the growth that has made these innovations available to the public. The Research and Development section examines past achievements, current successes, and future goals for each of the ten NASA centers. The Commercial Benefits section proudly highlights 51 new spinoff products, including a heart pump for patients needing a heart transplant, as well as an air purifier that destroys anthrax spores. The Technology Transfer and Outreach section describes the outreach achievements and educational successes made possible through the NASA Commercial Technology Network

Arms Control and nonproliferation technologies: Technology options and associated measures for monitoring a Comprehensive Test Ban, Second quarter

Energy Technology Data Exchange (ETDEWEB)

Casey, Leslie A.

1994-01-01

This newsletter contains reprinted papers discussing technology options and associated measures for monitoring a Comprehensive Test Ban Treaty (CTBT). These papers were presented to the Conference on Disarmament (CD) in May and June 1994. An interagency Verification Monitoring Task Force developed the papers. The task force included participants from the Arms Control and Disarmament Agency, the Department of Defense, the Department of Energy, the Intelligence Community, the Department of Interior, and the Department of State. The purpose of this edition of Arms Control and Nonproliferation Technologies is to share these papers with the broad base of stakeholders in a CTBT and to facilitate future technology discussions. The papers in the first group discuss possible technology options for monitoring a CTBT in all environments (underground, underwater, atmosphere, and space). These technologies, along with on-site inspections, would facilitate CTBT monitoring by treaty participants. The papers in the second group present possible associated measures, e.g., information exchanges and transparency measures, that would build confidence among states participating in a CTBT.

Study on technology for utilization of the comprehensive functions of human group

International Nuclear Information System (INIS)

Numano, Masayoshi; Matsuoka, Takeshi; Tanaka, Kunihiko; Fukuto, Junji; Mitomo, Nobuo; Miyazaki Keiko; Matsukura, Hiroshi; Tanba, Yasuyuki; Ando, Hirotomo

1999-01-01

To prevent an error manipulation in human intelligent workings during plant operation, it seems important to investigate on human comprehensive abilities. In this study, an investigation was made on 4 points; display of plant conditions fitting for human recognition abilities, feedback of plant working fitting to human recognition and sensation, display suitable for human recognition to predict the conditions of plant, and decision making and working support as a group. A supporting system to operate a plant model was constructed using multi-media projection system and transmission head-mount display. A feedback system able to reflect conditional changes in an actuator and a plant during bulb operation was constructed. Using these trial systems, geometric PWR plant model was constructed in 3D-VR space to make numerical simulation. Thus, the efficacy of this system for operating and surveillance workings was examined using control panel on personal computer. Three-dimensional presentation was obtained by combined use of an ordinal operation surveillance system and transmission HMD. If this system is used in combination with FTA, ETA and other logic support like online manual, human errors in judgement and workings during plant operations would be avoided through operator's noticing. If plant operation is regarded as a multi-agent consisted of a plant and humans, it seems possible to construct a model for working assignment and information exchange among agents with different intelligent capacities. It was demonstrated that 3D-VR was effective for information exchange especially among highly intelligent operators because 3D-VR was able to express abundant positional information. Since 3D pointer easily inform other operators about notice point on the screen, the pointer was thought very useful for mutual understanding among operators. (M.N.)

Utility-Scale Concentrating Solar Power and Photovoltaic Projects: A Technology and Market Overview

Energy Technology Data Exchange (ETDEWEB)

Mendelsohn, M.; Lowder, T.; Canavan, B.

2012-04-01

Over the last several years, solar energy technologies have been, or are in the process of being, deployed at unprecedented levels. A critical recent development, resulting from the massive scale of projects in progress or recently completed, is having the power sold directly to electric utilities. Such 'utility-scale' systems offer the opportunity to deploy solar technologies far faster than the traditional 'behind-the-meter' projects designed to offset retail load. Moreover, these systems have employed significant economies of scale during construction and operation, attracting financial capital, which in turn can reduce the delivered cost of power. This report is a summary of the current U.S. utility-scale solar state-of-the-market and development pipeline. Utility-scale solar energy systems are generally categorized as one of two basic designs: concentrating solar power (CSP) and photovoltaic (PV). CSP systems can be further delineated into four commercially available technologies: parabolic trough, central receiver (CR), parabolic dish, and linear Fresnel reflector. CSP systems can also be categorized as hybrid, which combine a solar-based system (generally parabolic trough, CR, or linear Fresnel) and a fossil fuel energy system to produce electric power or steam.

Examination of incentive mechanisms for innovative technologies applicable to utility and nonutility power generators

Energy Technology Data Exchange (ETDEWEB)

McDermott, K.A. [Illinois Commerce Commission, Springfield, IL (United States); Bailey, K.A.; South, D.W. [Argonne National Lab., IL (United States). Environmental Assessment and Information Sciences Div.

1993-08-01

Innovative technologies, built by either utility or nonutility power generators, have the potential to lower costs with less environmental emissions than conventional technologies. However, the public-good nature of information, along with uncertain costs, performance, and reliability, discourages rapid adoption of these technologies. The effect of regulation of electricity production may also have an adverse impact on motivation to innovate. Slower penetration of cleaner, more efficient technologies could result in greater levels of pollution, higher electricity prices, and a reduction in international competitiveness. Regulatory incentives could encourage adoption and deployment of innovative technologies of all kinds, inducting clean coal technologies. Such incentives must be designed to offset risks inherent in innovative technology and encourage cost-effective behavior. To evaluate innovative and conventional technologies equally, the incremental cost of risk (ICR) of adopting the innovative technology must be determined. Through the ICR, the magnitude of incentive required to make a utility (or nonutility) power generator equally motivated to use either conventional or innovative technologies can be derived. Two technology risks are examined: A construction risk, represented by a 15% cost overrun, and an operating risk, represented by a increased forced outage rate (decreased capacity factor). Different incentive mechanisms and measurement criteria are used to assess the effects of these risks on ratepayers and shareholders. In most cases, a regulatory incentive could offset the perceived risks while encouraging cost-effective behavior by both utility and nonutility power generators. Not only would the required incentive be recouped, but the revenue requirements would be less for the innovative technology; also, less environmental pollution would be generated. In the long term, ratepayers and society would benefit from innovative technologies.

Economic aspects of advanced energy technologies

International Nuclear Information System (INIS)

Ramakumar, R.; Rodriguez, A.P.; Venkata, S.S.

1993-01-01

Advanced energy technologies span a wide variety of resources, techniques, and end-user requirements. Economic considerations are major factors that shape their harnessing and utilization. A discussion of the basic factors in the economic arena is presented, with particular emphasis on renewable energy technologies--photovoltaics, solar-thermal, wind-electric conversion, biomass utilization, hydro, and tidal and wave energy systems. The following are essential to determine appropriate energy system topologies: proper resource-need matching with an eye on the quality of energy requirements, integrated use of several resources and technologies, and a comprehensive consideration which includes prospecting, collection, conversion, transportation, distribution, storage and reconversion, end use, and subsequent waste management aspects. A few case studies are included to apprise the reader of the status of some of the key technologies and systems

Utilization of microbes: modern developments in biological technology

Energy Technology Data Exchange (ETDEWEB)

Praeve, P

1977-01-01

Until recently microbiology had found use only in the foodstuffs sector and in the production of antibiotics; however, the production of biomass should be regarded as the key development of the new science of biotechnology. The biomass consists of fatty and protein-rich microorganisms that can be used for example, in animal feeds. The microorganisms grow not only on cellulose waste and other biological substrates but also, for example, on petroleum and methanol. Their energy demand is comparatively low. It is being realized more and more that inflexible technologies pose problems for our civilization and that biotechnology, which utilizes the cyclic metabolic pathways of microorganisms and often recycles waste materials, shows great promise for the future. Equipment used in the single-cell protein technology is briefly described.

Reading comprehension as an alternative tool for teaching science and nuclear technology

International Nuclear Information System (INIS)

Martin, H. R.

2013-01-01

In recent decades, the vast amount of information originated in the production of knowledge and its applications, has highlighted the importance of being independent readers, critics, and able to interpret written material circulating referred to scientific and technological issues, that invade the people's daily life. Moreover, in the last stage of education system of all future citizens of the country, the results of many diagnoses have highlighted the difficulties of young students to understand the texts related to science and technology. However, simultaneously with these weaknesses, students permanently express the need to relate science and technology to everyday life, and are interested in the discussion of the news related to atomic energy spread by the mass media. This duality lack of interest in reading vs interest in knowledge in certain subjects, is what has been taken into account when proposing this pedagogical approach that simultaneously involves several aspects. From the need to find a trigger for the treatment of a particular issue, to familiarization of students with the vocabulary and methodology of science ill the debate on the characteristics of specific technological applications of nuclear technology. Considering particularly the last of these factors, since 2011 has been developed in Jose Maria Paz School of Cordoba, Reading Comprehension Experience, using texts with scientific and technological contents published by Institute for Energy and Development (IEDS) of the National Atomic Energy Commission (CNEA) in Knowledge Leaves Series, as a methodological tool, to bring students to the physics of the atom and matter. The reading strategy used is based on the hypothesis of the type of questions being asked about the contents, can help students to develop reading strategies for comprehension and thus contribute positively to his learning. With this proposal it has been observed an increased on student interest in learning natural science

UTILITY ADVANCED TURBINE SYSTEMS (ATS) TECHNOLOGY READINESS TESTING

Energy Technology Data Exchange (ETDEWEB)

Unknown

1999-10-01

The overall objective of the Advanced Turbine System (ATS) Phase 3 Cooperative Agreement between GE and the U.S. Department of Energy (DOE) is the development of a highly efficient, environmentally superior, and cost-competitive utility ATS for base-load utility-scale power generation, the GE 7H (60 Hz) combined cycle power system, and related 9H (50 Hz) common technology. The major effort will be expended on detail design. Validation of critical components and technologies will be performed, including: hot gas path component testing, sub-scale compressor testing, steam purity test trials, and rotational heat transfer confirmation testing. Processes will be developed to support the manufacture of the first system, which was to have been sited and operated in Phase 4 but will now be sited and operated commercially by GE. This change has resulted from DOE's request to GE for deletion of Phase 4 in favor of a restructured Phase 3 (as Phase 3R) to include full speed, no load (FSNL) testing of the 7H gas turbine. Technology enhancements that are not required for the first machine design but will be critical for future ATS advances in performance, reliability, and costs will be initiated. Long-term tests of materials to confirm design life predictions will continue. A schematic of the GE H machine is shown in Figure 1-1. Information specifically related to 9H production is presented for continuity in H program reporting, but lies outside the ATS program. This report summarizes work accomplished from 4Q98 through 3Q99. The most significant accomplishments are listed.

A technology-assessment methodology for electric utility planning: With application to nuclear power plant decommissioning

International Nuclear Information System (INIS)

Lough, W.T.

1987-01-01

Electric utilities and public service commissions have not taken full advantage of the many proven methodologies and techniques available for evaluating complex technological issues. In addition, evaluations performed are deficient in their use of (1) methods for evaluating public attitudes and (2) formal methods of analysis for decision making. These oversight are substantiated through an examination of the literature relevant to electric utility planning. The assessment process known as technology assessment or TA is proposed, and a TA model is developed for route in use in utility planning by electric utilities and state regulatory commissions. Techniques to facilitate public participation and techniques to aid decision making are integral to the proposed model and are described in detail. Criteria are provided for selecting an appropriate technique on a case-by-case basis. The TA model proved to be an effective methodology for evaluating technological issues associated with electric utility planning such as decommissioning nuclear power plants. Through the use of the nominal group technique, the attitudes of a group of residential ratepayers were successfully identified and included in the decision-making process

Improvement and utilization of irradiation capsule technology in HANARO

International Nuclear Information System (INIS)

Choo, Kee-Nam; Cho, Man-Soon; Kim, Bong-Goo; Lee, Cheol-Yong; Yang, Sung-Woo; Shin, Yoon-Taek; Park, Seng-Jae; Jung, Hoan-Sung

2012-01-01

Several improvements of irradiation capsule technology regarding irradiation test parameters, such as temperature and neutron flux/fluence, and regarding instrumentation have progressed at HANARO since the last KAERI-JAERI joint seminar held in 2008. The standard HANARO capsule technology that was developed for use in a commercial power plant temperature of about 300degC was improved to apply to a temperature range of 100-1000degC for the irradiation test of materials of new research reactors and future nuclear systems. Low-flux and long-term irradiation technologies have been developed at HANARO. As a beginning step of the localization of capsule instrumentation technology, the irradiation performance of a domestically produced thermocouple and LVDT will be examined at HANARO. The accuracy of an evaluation of neutron fluence and precise welding technology are also being examined at HANARO. Based on these accumulated capsule technologies, a HANARO irradiation capsule system is being actively utilized for the national R and D programme on commercial nuclear reactors and nuclear fuel cycle technology in Korea. HANARO has recently started the irradiation support of R and D relevant to future nuclear systems including SMART, VHTR, and SFR, and HANARO is preparing new support relevant to new research and Fusion reactors. (author)

Utilization of Information and Communication Technologies as a Predictor of Educational Stress on Secondary School Students

Science.gov (United States)

Eskicumali, Ahmet; Arslan, Serhat; Demirtas, Zeynep

2015-01-01

The purpose of this study is to examine the relationship between utilization of information and communication technologies and educational stress. Participants were 411 secondary school students. Educational Stress Scale and Utilization of Information and Communication Technologies Scale were used as measures. The relationships between students'…

The value of residential photovoltaic systems: A comprehensive assessment

Science.gov (United States)

Borden, C. S.

1983-01-01

Utility-interactive photovoltaic (PV) arrays on residential rooftops appear to be a potentially attractive, large-scale application of PV technology. Results of a comprehensive assessment of the value (i.e., break-even cost) of utility-grid connected residential photovoltaic power systems under a variety of technological and economic assumptions are presented. A wide range of allowable PV system costs are calculated for small (4.34 kW (p) sub ac) residential PV systems in various locales across the United States. Primary factor in this variation are differences in local weather conditions, utility-specific electric generation capacity, fuel types, and customer-load profiles that effect purchase and sell-back rates, and non-uniform state tax considerations. Additional results from this analysis are: locations having the highest insolation values are not necessary the most economically attractive sites; residential PV systems connected in parallel to the utility demonstrate high percentages of energy sold back to the grid, and owner financial and tax assumptions cause large variations in break-even costs. Significant cost reduction and aggressive resolution of potential institutional impediments (e.g., liability, standards, metering, and technical integration) are required for a residential PV marker to become a major electric-grid-connected energy-generation source.

The Ef fects of Technology Usabilitiy and Individual Technology Readiness on Utilization of Electronic Document Management System (EDMS: A Research on Employee of University Hospital

Directory of Open Access Journals (Sweden)

Asuman Atilla

2015-06-01

Full Text Available Electronic Document Management System (EDMS is software which is utilized for writing, sending and storing, briefly managing the processes and operations of the corporations and institutions. In this empirical research, the statistical differences are investigated between users’ concerns about usability of mentioned technology, users’ technological readiness levels and users’ utilization status of EDMS sample is formed by 189 administrative staff of a university hospital in Ankara. According to findings, significant statistical differences are found between some dimensions of technology usability (usability effectiveness, learnability,helpfulness satisfaction, some dimensions of technology readiness (discomfort and insecurity and the utilization status (user, nonuser of EDMS.

Advanced Acid Gas Separation Technology for the Utilization of Low Rank Coals

Energy Technology Data Exchange (ETDEWEB)

Kloosterman, Jeff

2012-12-31

Air Products has developed a potentially ground-breaking technology – Sour Pressure Swing Adsorption (PSA) – to replace the solvent-based acid gas removal (AGR) systems currently employed to separate sulfur containing species, along with CO{sub 2} and other impurities, from gasifier syngas streams. The Sour PSA technology is based on adsorption processes that utilize pressure swing or temperature swing regeneration methods. Sour PSA technology has already been shown with higher rank coals to provide a significant reduction in the cost of CO{sub 2} capture for power generation, which should translate to a reduction in cost of electricity (COE), compared to baseline CO{sub 2} capture plant design. The objective of this project is to test the performance and capability of the adsorbents in handling tar and other impurities using a gaseous mixture generated from the gasification of lower rank, lignite coal. The results of this testing are used to generate a high-level pilot process design, and to prepare a techno-economic assessment evaluating the applicability of the technology to plants utilizing these coals.

Development of Reading Comprehension Skills among Students with Intellectual Disabilities Using Technologically-Based Reading Programs

Science.gov (United States)

Macklin, Ella M.

2016-01-01

This research paper reported the results from research conducted regarding technologically-based reading comprehension programs for students who have intellectual disabilities. It provided evidence-based research and theoretical bases for learning (i.e. Zone of Generativity, Constructivism, Self-Efficacy) on the issue of these students not being…

Utilization of communication technology by patients enrolled in substance abuse treatment.

Science.gov (United States)

McClure, Erin A; Acquavita, Shauna P; Harding, Emily; Stitzer, Maxine L

2013-04-01

Technology-based applications represent a promising method for providing efficacious, widely available interventions to substance abuse treatment patients. However, limited access to communication technology (i.e., mobile phones, computers, internet, and e-mail) could significantly impact the feasibility of these efforts, and little is known regarding technology utilization in substance abusing populations. A survey was conducted to characterize utilization of communication technology in 266 urban, substance abuse treatment patients enrolled at eight drug-free, psychosocial or opioid-replacement therapy clinics. Survey participants averaged 41 years of age and 57% had a yearly household income of less than $15,000. The vast majority reported access to a mobile phone (91%), and to SMS text messaging (79%). Keeping a consistent mobile phone number and yearly mobile contract was higher for White participants, and also for those with higher education, and enrolled in drug-free, psychosocial treatment. Internet, e-mail, and computer use was much lower (39-45%), with younger age, higher education and income predicting greater use. No such differences existed for the use of mobile phones however. Concern regarding the digital divide for marginalized populations appears to be disappearing with respect to mobile phones, but still exists for computer, internet, and e-mail access and use. Results suggest that mobile phone and texting applications may be feasibly applied for use in program-client interactions in substance abuse treatment. Careful consideration should be given to frequent phone number changes, access to technology, and motivation to engage with communication technology for treatment purposes. Copyright © 2012 Elsevier Ireland Ltd. All rights reserved.

Utilizing technological innovations to enhance psychotherapy supervision, training, and outcomes.

Science.gov (United States)

Barnett, Jeffrey E

2011-06-01

Recent technological advances in the use of the Internet and video technologies has greatly impacted the provision of psychotherapy and other clinical services as well as how the training of psychotherapists may be conducted. When utilized appropriately these technologies may provide greater access to needed services to include treatment, consultation, supervision, and training. Specific ethical challenges and pitfalls are discussed and recommendations are made for the ethical use of these technologies. Additionally, innovative practices from the seven articles in the special section that follows are highlighted and reviewed. These articles present a number of innovations that can take psychotherapy training, research, supervision, and treatment forward toward increased effectiveness. Recommendations for integrating these innovations into ongoing practices are provided and for additional research to build on the important work of the authors in this special section are provided.

Development of Comprehensive Competences with Information and Communication Technologies in Distance Learning Higher Education

Directory of Open Access Journals (Sweden)

Isabel Cristina Muñoz Vargas

2015-09-01

Full Text Available This study aimed to identify and implement educational strategies through the use of Information and Communication Technologies in order for students of distance learning (who belong to the academic degrees of Natural Sciences and Environmental Education at the University of Córdoba to develop comprehensive competences. We used the action research method divided in two cycles, with the participation of three teachers and 242 students. The data analysis of the first cycle established three analysis categories and designed four intervention strategies based on the scientific knowledge and the academic experience of the teachers. The results of the second cycle showed an improvement of the academic performance of the students in a comprehensive way.

Current status of utilization of radioisotopes and radiation technology in Malaysia

International Nuclear Information System (INIS)

Ahmad Tajuddin Ali

1985-01-01

The utilization of isotope and radiation technology in Malaysia dates back to the early sixties. However it was confined to the field of medicine. Today, the use of this technology has widen up, covering the agricultural and industrial areas. The increasing use of the technology has prompted the government to establish the Nuclear Energy Unit whose one of its main functions is to ensure the safe application of radioisotopes and radiations. For this purpose, facilities for training, calibration, waste treatment, etc. were provided by this unit to cater the need of radioisotope and radiation users throughout the country. (author)

A cost-utility analysis of a comprehensive orthogeriatric care for hip fracture patients, compared with standard of care treatment.

Science.gov (United States)

Ginsberg, Gary; Adunsky, Abraham; Rasooly, Iris

2013-01-01

The economic burden associated with hip fractures calls for the investigation of innovative new cost-utility forms of organisation and integration of services for these patients. To carry out a cost-utility analysis integrating epidemiological and economic aspects for hip fracture patients treated within a comprehensive orthogeriatric model (COGM) of care, as compared with standard of care model (SOCM). A demonstration study conducted in a major tertiary medical centre, operating both a COGM ward and standard orthopaedic and rehabilitation wards. Data was collected on the clinical outcomes and health care costs of the two different treatment modalities, in order to calculate the absolute cost and disability-adjusted life years (DALY) ratio. The COGM model used 23% fewer resources per patient ($14,919 vs. $19,363) than the SOCM model and to avert 0.226 additional DALY per patient, mainly as a result of lower 1-year mortality rates among COGM patients (14.8% vs. 17.3%). A comprehensive ortho-geriatric care modality is more cost-effective, providing additional quality-adjusted life years (QALY) while using fewer resources compared with standard of care approach. The results should assist health policy-makers in optimising healthcare use and healthcare planning.

Utilizing TOPSIS intensified with adjustment similarity factor to determine price of technology

Directory of Open Access Journals (Sweden)

Seyed Mohammad Seyedhosseini

2012-08-01

Full Text Available Technology transfer has been a very frequent activity in the industrial world nowadays. Technology valuation, and in particular technology pricing, has played a considerable role in these transactions, in spite of a huge amount of limitations in the pricing methodologies applied. Making a sound, traceable and reliable means for applying the price evaluation procedure, seems as a technological requirement to be traced for. The objective of delivering this paper is to introduce a new numerical technology pricing method to provide the two transacting parties a unique compromised price. A three-dimensional model for technology pricing is proposed and The TOPSPS algorithm has been utilized to select the most similar technologies to the intended one and the constructed scoring system is applied to calculate the final technology price accordingly.

Comprehensive Nuclear-Test-Ban Treaty: Science and Technology 2011 (S and T2011). Announcement

International Nuclear Information System (INIS)

2011-01-01

To build and strengthen its relationship with the broader science community in support of the Treaty, the Preparatory Commission for the Comprehensive Nuclear-Test-Ban Treaty Organization (CTBTO) invites the community to a scientific conference CTBT: Science and Technology 2011 (S and T 2011), to be held from 8 to 10 June 2011 at the Hofburg Palace in Vienna, Austria. The conference goals are: Discuss advances in science and technology relevant to test ban verification; Explore scientific applications of the CTBT verification infrastructure; Encourage partnerships and knowledge exchange between the CTBTO and the broader scientific community.

Utilizing Technology to Encourage Healthy Lifestyles

Directory of Open Access Journals (Sweden)

Cynthia Shuster

2013-06-01

Full Text Available In our fast paced world, using technology allows us to connect with people and assist them in developing healthier lifestyles within their time limits due to families, work, and other responsibilities. The goal of our project was the development of online, technology-based, nutrition, health, and fitness education challenges using social media as a means of helping consumers develop healthy lifestyle changes. Participants completed preassessments and postassessments to determine overall program impact and to self-report perceptions of knowledge gained and practice/behavior change. Results from the challenges indicated participants gained knowledge on nutrition, health and fitness topics while making strides towards lifestyle changes and adoption of healthy habits. Results revealed healthier eating habits were developed and physical activity was increased with many participants losing weight. Ease of participating was the most reported reason for participating in the challenges. To determine “best practice,” varying lengths of time for the challenges from four, seven, and thirteen weeks allowed the educators to derive implications for future programming, including branding, length of the challenge, frequency, and participant behavior change. To remain relevant and reach a greater diversity of populations, educators need to continue to explore and utilize various social media tools.

Global orbit feedback utilizing analog and digital technologies

International Nuclear Information System (INIS)

Singh, O.; Tang, Y.; Ramamoorthy, S.; Krinsky, S.; Yu, L.H.

1997-01-01

At the NSLS, an analog global orbit feedback system is used in regular operations, and a digital global orbit feedback system is available in machine physics studies on the X-Ray Ring. Here, the authors discuss the relative merits of utilizing analog and digital technology in orbit feedback. Results of experiments are reported characterizing the performance of the analog and digital systems when operated individually or together. They give their thoughts on plans for future development of the orbit feedback systems at the NSLS

Comprehensive hard materials

CERN Document Server

2014-01-01

Comprehensive Hard Materials deals with the production, uses and properties of the carbides, nitrides and borides of these metals and those of titanium, as well as tools of ceramics, the superhard boron nitrides and diamond and related compounds. Articles include the technologies of powder production (including their precursor materials), milling, granulation, cold and hot compaction, sintering, hot isostatic pressing, hot-pressing, injection moulding, as well as on the coating technologies for refractory metals, hard metals and hard materials. The characterization, testing, quality assurance and applications are also covered. Comprehensive Hard Materials provides meaningful insights on materials at the leading edge of technology. It aids continued research and development of these materials and as such it is a critical information resource to academics and industry professionals facing the technological challenges of the future. Hard materials operate at the leading edge of technology, and continued res...

Gas Permeability Evolution Mechanism and Comprehensive Gas Drainage Technology for Thin Coal Seam Mining

Directory of Open Access Journals (Sweden)

Fangtian Wang

2017-09-01

Full Text Available A thin coal seam mined as a protective coal seam above a gas outburst coal seam plays a central role in decreasing the degree of stress placed on a protected seam, thus increasing gas permeability levels and desorption capacities to dramatically eliminate gas outburst risk for the protected seam. However, when multiple layers of coal seams are present, stress-relieved gas from adjacent coal seams can cause a gas explosion. Thus, the post-drainage of gas from fractured and de-stressed strata should be applied. Comprehensive studies of gas permeability evolution mechanisms and gas seepage rules of protected seams close to protective seams that occur during protective seam mining must be carried out. Based on the case of the LongWall (LW 23209 working face in the Hancheng coal mine, Shaanxi Province, this paper presents a seepage model developed through the FLAC3D software program (version 5.0, Itasca Consulting Group, Inc., Minneapolis, MI, USA from which gas flow characteristics can be reflected by changes in rock mass permeability. A method involving theoretical analysis and numerical simulation was used to analyze stress relief and gas permeability evolution mechanisms present during broken rock mass compaction in a goaf. This process occurs over a reasonable amount of extraction time and in appropriate locations for comprehensive gas extraction technologies. In using this comprehensive gas drainage technological tool, the safe and efficient co-extraction of thin coal seams and gas resources can be realized, thus creating a favorable environment for the safe mining of coal and gas outburst seams.

A comprehensible need of zinc oxide varistors in electronics technology

International Nuclear Information System (INIS)

Mehmood, F.S.

2007-01-01

A range of varistors, in terms of break down voltage, is required to protect integrated circuits, automotive systems and other modern electronics against transient over-voltages. There is a progressing need for the development and advancement of rugged and reliable varistor capable and proficient of working in harsh and callous environment like automotive Industry where greater than before use of electronics technology has led to improvements in equipment performance and presentation. There is a comprehensible need to combine triumphant and successable models developed at different length scales into an integrated framework that can be used to drive new research and guide experimental efforts and device development. The review of ZnO varistor in particular and metal-oxide varistors (MOVs) in general is presented In this article. (author)

Perception of medical students for utility of mobile technology use in medical education

OpenAIRE

Sushama Subhash Thakre; Subhash Bapurao Thakre

2015-01-01

Introduction: Mobile technology is changing the way we live, and it is beginning to change the way we learn. Current literature reviews have shown that research on mobile technology in medical education primarily focused on efficacy, of mobile devices as an educational tool and resource, infrastructure to support m-learning, benefits, challenges, and appropriate use. Objectives: To assess the perception of medical student for the utility of mobile technology in their learning experience and t...

Computer-Assisted Foreign Language Teaching and Learning: Technological Advances

Science.gov (United States)

Zou, Bin; Xing, Minjie; Wang, Yuping; Sun, Mingyu; Xiang, Catherine H.

2013-01-01

Computer-Assisted Foreign Language Teaching and Learning: Technological Advances highlights new research and an original framework that brings together foreign language teaching, experiments and testing practices that utilize the most recent and widely used e-learning resources. This comprehensive collection of research will offer linguistic…

Trading Places: When Teachers Utilize Student Expertise in Technology-Intensive Classrooms.

Science.gov (United States)

Ringstaff, Cathy; And Others

Utilizing self-report data from 32 elementary and secondary teachers, this longitudinal, qualitative study examines the role shifts of both teachers and students as they adapted to teaching and learning in educational, technology-rich, Apple Classrooms of Tomorrow environments. At first, teachers in these instructionally innovative classrooms…

Plasma technology in metallurgical processing

Energy Technology Data Exchange (ETDEWEB)

Haile, O.

1995-12-31

This literature work is mainly focusing on the mechanisms of plasma technology and telling about metallurgical processing, particularly iron and steelmaking as well as the advantage of the unique properties of plasma. The main advantages of plasma technology in metallurgical operations is to direct utilization of naturally available raw materials and fuels without costly upgrading andlor beneficiation, improved environmental impact, improve process control, significant amplification of reactor and process equipment utilization and increased efficiency of raw materials, energy and man power. This literature survey is based on the publication `plasma technology in metallurgical processing` presents a comprehensive account of the physical, electrical, and mechanical aspects of plasma production and practical processing. The applications of plasma technology in metallurgical processing are covered in depth with special emphasis on developments in promising early stages. Plasma technology of today is mature in the metallurgical process applications. A few dramatic improvements are expected in the near future this giving an impetus to the technologists for the long range planning. (18 refs.) (author)

The role of exergy in increasing utilization of green energy and technologies. Paper no. IGEC-1-Keynote-Rosen

International Nuclear Information System (INIS)

Rosen, M.A.

2005-01-01

The use of exergy is described as a measure for identifying and explaining the benefits of green energy and technologies, so the benefits can be clearly understood and appreciated by experts and non-experts alike, and the utilization of green energy and technologies can be increased. Exergy can be used to assess and improve energy systems, and can help better understand the benefits of utilizing green energy by providing more useful and meaningful information than energy provides. Exergy clearly identifies efficiency improvements and reductions in thermodynamic losses attributable to green technologies. Exergy can also identify better than energy the environmental benefits and economics of energy technologies. Exergy should be utilized to engineers and scientists, as well as decision and policy makers, involved in green energy and technologies. (author)

Utilization of information technology in eastern North Carolina physician practices: determining the existence of a digital divide.

Science.gov (United States)

Rosenthal, David A; Layman, Elizabeth J

2008-02-13

The United States Department of Health and Human Services (DHHS) has emphasized the importance of utilizing health information technologies, thus making the availability of electronic resources critical for physicians across the country. However, few empirical assessments exist regarding the current status of computerization and utilization of electronic resources in physician offices and physicians' perceptions of the advantages and disadvantages of computerization. Through a survey of physicians' utilization and perceptions of health information technology, this study found that a "digital divide" existed for eastern North Carolina physicians in smaller physician practices. The physicians in smaller practices were less likely to utilize or be interested in utilizing electronic health records, word processing applications, and the Internet.

FY 2000 report on the results of the development of the environmentally friendly type high efficiency energy utilization system. Part 1. Study of the effective utilization technology of high efficiency energy (Study of the optimum system design technology); 2000 nendo kankyo chowagata kokoritsu energy riyo system kaihatsu seika hokokusho. 1. Kokoritsu energy yuko riyo gijutsu no kenkyu (saiteki system sekkei gijutsu no kenkyu)

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-05-01

The paper conducted the development of element technology and comprehensive adjustment which are related to the development of the environmentally friendly type high efficiency energy utilization system and the study of the high efficiency energy utilization technology, and the results of FY 2000, the final fiscal year, were summed up. As to the R and D of the exhaust heat reforming/recovery system, the internal heat exchange type distillation tower was developed which has a good energy conservation effect and enables the heat supply outside. Concerning the R and D of the cogeneration system using low calorie exhaust gas, the following were conducted for further improvement of the performance of electrothermic elements: evaluation of the thermoelectric performance using bulk elements, development of new elements and evaluation of the energy balance at the time of combustion, etc. Relating to the R and D of the low temperature exhaust heat utilization cogeneration system, conducted were the development of thermoelectric materials and the fabrication/evaluation study of module. Moreover, WATT20A equipped with the original power generation module developed in this study was fabricated, and the data on the operation at the temperature of 150 degrees C were obtained by WATT-20HT. (NEDO)

A comprehensive guide of remediation technologies for oil contaminated soil - Present works and future directions.

Science.gov (United States)

Lim, Mee Wei; Lau, Ee Von; Poh, Phaik Eong

2016-08-15

Oil spills result in negative impacts on the environment, economy and society. Due to tidal and waves actions, the oil spillage affects the shorelines by adhering to the soil, making it difficult for immediate cleaning of the soil. As shoreline clean-up is the most costly component of a response operation, there is a need for effective oil remediation technologies. This paper provides a review on the remediation technologies for soil contaminated with various types of oil, including diesel, crude oil, petroleum, lubricating oil, bitumen and bunker oil. The methods discussed include solvent extraction, bioremediation, phytoremediation, chemical oxidation, electrokinetic remediation, thermal technologies, ultrasonication, flotation and integrated remediation technologies. Each of these technologies was discussed, and associated with their advantages, disadvantages, advancements and future work in detail. Nonetheless, it is important to note that no single remediation technology is considered the best solution for the remediation of oil contaminated soil. This review provides a comprehensive literature on the various remediation technologies studied in the removal of different oil types from soil. Copyright © 2016 Elsevier Ltd. All rights reserved.

Utilities must leverage existing resources and upgrade technology to avoid future blackouts

International Nuclear Information System (INIS)

Masiello, R.

2004-01-01

The blackout of August 14, 2003 is used as the incentive to examine transmission grid reliability, expose its deficiencies in terms of technology, standards and processes used to manage reliability, and to make recommendations for leveraging existing resources and upgrading both the technology and procedures to avoid similar breakdowns in the future. It is recommended that in the area of monitoring transmission grid reliability utilities should borrow a page from the Enterprise Risk Management Practices of the financial industry by adopting a system which looks beyond the first 'credible' contingency (the current system) and examine many more 'incredible' contingencies, and underlying events that can trigger multiple contingencies, and plan for them in their operations. Utility companies are also urged to upgrade their energy management systems (EMS) technology to be able to deal with the kinds of severely depressed voltages and overloaded circuits that many grids experience today. Investment in new capabilities in control rooms, more and better communications will be essential. EMS algorithms and models must be upgraded to operate under a broader spectrum of grid conditions and to simulate the once-in-a-lifetime outage scenarios that most operators believe could never strike their utility. Expert opinion strongly suggests that as part of this process of upgrading, contingency analysis should shift from the 'N-1' model of the present to a stochastic model that considers a wider range of possible events in a probabilistic framework

Utilities must leverage existing resources and upgrade technology to avoid future blackouts

Energy Technology Data Exchange (ETDEWEB)

Masiello, R. [KEMA Inc. Burlington, MA (United States)

2004-06-01

The blackout of August 14, 2003 is used as the incentive to examine transmission grid reliability, expose its deficiencies in terms of technology, standards and processes used to manage reliability, and to make recommendations for leveraging existing resources and upgrading both the technology and procedures to avoid similar breakdowns in the future. It is recommended that in the area of monitoring transmission grid reliability utilities should borrow a page from the Enterprise Risk Management Practices of the financial industry by adopting a system which looks beyond the first 'credible' contingency (the current system) and examine many more 'incredible' contingencies, and underlying events that can trigger multiple contingencies, and plan for them in their operations. Utility companies are also urged to upgrade their energy management systems (EMS) technology to be able to deal with the kinds of severely depressed voltages and overloaded circuits that many grids experience today. Investment in new capabilities in control rooms, more and better communications will be essential. EMS algorithms and models must be upgraded to operate under a broader spectrum of grid conditions and to simulate the once-in-a-lifetime outage scenarios that most operators believe could never strike their utility. Expert opinion strongly suggests that as part of this process of upgrading, contingency analysis should shift from the 'N-1' model of the present to a stochastic model that considers a wider range of possible events in a probabilistic framework.

Suicide Prevention in the Dot Com Era: Technological Aspects of a University Suicide Prevention Program

Science.gov (United States)

Manning, Jessica; VanDeusen, Karen

2011-01-01

Western Michigan University's Suicide Prevention Program utilizes multiple technological components, including an online training course, a Web site, and 2 social networking Web site profiles, as integral aspects of a comprehensive program. This article discusses the development, maintenance, use, and impact of the technological aspects of this…

Utilization of Educational Innovations and Technology in Research and Extension Functions of State Universities

Directory of Open Access Journals (Sweden)

Rosalinda M. Comia

2017-11-01

Full Text Available The study focused on the extent of utilization of the educational innovations and technology in research and extension functions of SUs. The descriptive design, triangulation method, and purposive sampling were applied in this study. The findings revealed that majority of the respondents are married adults and master’s degree graduates with education as their area of specialization. They are permanent in status and have considerable years in the University serving as research or extension officer. Research of SUs have common research thrusts in terms of environment and natural resources management but differ in their own respective agenda; similarly the SUs share common extension thrusts and concerns but differ in their programs, activities and projects related to community services. Commonly encountered problems concern inadequate funds and inability to access the available technology. Officers utilized educational innovations on research and extension to a moderate extent but software and hardware were utilized to a great extent; likewise internet-based communication was utilized to a great extent for research but used moderately for extension. This implies that compared to research, most of the extension functions do not require the use of internet-based communication. From the results of the study, it was recommended that review of the existing allocation of funds for technology development may be done to improve the existing hardware, software and communication facilities.

Recent advances in the utilization and the irradiation technology of the refurbished BR2 reactor

International Nuclear Information System (INIS)

Dekeyser, J.; Benoit, P.; Decloedt, C.; Pouleur, Y.; Verwimp, A.; Weber, M.; Vankeerberghen, M.; Ponsard, B.

1999-01-01

Operation and utilization of the materials testing reactor BR2 at the Belgian Nuclear Research Centre (SCK·CEN) has since its start in 1963 always followed closely the needs and developments of nuclear technology. In particular, a multitude of irradiation experiments have been carried out for most types of nuclear power reactors, existing or under design. Since the early 1990s and increased focus was directed towards more specific irradiation testing needs for light water reactor fuels and materials, although other areas of utilization continued as well (e.g. fusion reactor materials, safety research, ...), including also the growing activities of radioisotope production and silicon doping. An important milestone was the decision in 1994 to implement a comprehensive refurbishment programme for the BR2 reactor and plant installations. The scope of this programme comprised very substantial studies and hardware interventions, which have been completed in early 1997 within planning and budget. Directly connected to this strategic decision for reactor refurbishment was the reinforcement of our efforts to requalify and upgrade the existing irradiation facilities and to develop advanced devices in BR2 to support emerging programs in the following fields: - LWR pressure vessel steel, - LWR irradiation assisted stress corrosion cracking (IASCC), - reliability and safety of high-burnup LWR fuel, - fusion reactor materials and blanket components, - fast neutron reactor fuels and actinide burning, - extension and diversification of radioisotope production. The paper highlights these advances in the areas of BR2 utilisation and the ongoing development activities for the required new generation of irradiations devices. (author)

Energy minimization strategies and renewable energy utilization for desalination: a review.

Science.gov (United States)

Subramani, Arun; Badruzzaman, Mohammad; Oppenheimer, Joan; Jacangelo, Joseph G

2011-02-01

Energy is a significant cost in the economics of desalinating waters, but water scarcity is driving the rapid expansion in global installed capacity of desalination facilities. Conventional fossil fuels have been utilized as their main energy source, but recent concerns over greenhouse gas (GHG) emissions have promoted global development and implementation of energy minimization strategies and cleaner energy supplies. In this paper, a comprehensive review of energy minimization strategies for membrane-based desalination processes and utilization of lower GHG emission renewable energy resources is presented. The review covers the utilization of energy efficient design, high efficiency pumping, energy recovery devices, advanced membrane materials (nanocomposite, nanotube, and biomimetic), innovative technologies (forward osmosis, ion concentration polarization, and capacitive deionization), and renewable energy resources (solar, wind, and geothermal). Utilization of energy efficient design combined with high efficiency pumping and energy recovery devices have proven effective in full-scale applications. Integration of advanced membrane materials and innovative technologies for desalination show promise but lack long-term operational data. Implementation of renewable energy resources depends upon geography-specific abundance, a feasible means of handling renewable energy power intermittency, and solving technological and economic scale-up and permitting issues. Copyright © 2011 Elsevier Ltd. All rights reserved.

Addressing professional resource challenges facing modern utilities with technological solutions

Energy Technology Data Exchange (ETDEWEB)

Goldie, T. [Hydro One Networks Inc., Toronto, ON (Canada); Hodder, S. [GE Digital Energy, Toronto, ON (Canada)

2008-07-01

The challenges facing electric utilities regarding a shortage of highly qualified labour to maintain, refurbish and expand electrical infrastructure can be attributed to a wave of retirements in skilled employees, a shortage of entry-level workers and a rapidly increasing workload caused by investment in electricity infrastructure. Two solutions were presented for finding and sustaining an adequate personnel base. The first involved developing local talent, both entry-level and mid-career staff to ensure that work continuity and workplace safety are maintained. The second involved the implementation of technological solutions to help optimize the use of existing and future labour resources. This paper presented the human resource programs developed by Hydro One, the largest electrical transmission and distribution utility in the province of Ontario. Their initiatives include raising the profile of the utility work environment through strategic partnerships with educational institutions and developing in house offerings to supplement existing academic programs. This paper also presented a technical solution to address the resources challenges specifically associated with power system protection and control. The solution targets professional and skilled trades involved in the design, installation and maintenance of automated substations and protection and control systems. It is based on the premise that resource optimization can be achieved by reducing inconsistent design and construction practices and replacing these designs with highly standardized materials with digital communications using IEC 61850. This new technology should attract young professionals to the power engineering field while still maintaining a high comfort level with the established professional workforce. 5 refs., 4 figs.

Biogas upgrading and utilization: Current status and perspectives

DEFF Research Database (Denmark)

Angelidaki, Irini; Treu, Laura; Tsapekos, Panagiotis

2018-01-01

Biogas production is an established sustainable process for simultaneous generation of renewable energy and treatment of organic wastes. The increasing interest of utilizing biogas as substitute to natural gas or its exploitation as transport fuel opened new avenues in the development of biogas...... upgrading techniques. The present work is a critical review that summarizes state-of-the-art technologies for biogas upgrading and enhancement with particular attention to the emerging biological methanation processes. The review includes comprehensive description of the main principles of various biogas...

Achievement report on research and development in the Sunshine Project in fiscal 1976. Comprehensive discussion on hydrogen utilizing subsystems and research on peripheral technologies (Comprehensive discussion on hydrogen utilizing subsystems); 1976 nendo suiso riyo subsystem no sogoteki kento to shuhen gijutsu ni kansuru kenkyu seika hokokusho. Suiso riyo subsystem no sogoteki kento

Energy Technology Data Exchange (ETDEWEB)

NONE

1977-03-01

This paper describes comprehensive discussion on hydrogen utilizing subsystems. Hydrogen combustion is characterized by how low the ignition energy is, and how fast the flame propagates. In addition, flame stability is high also in diffusion combustion. However, the diffusion combustion produces a great amount of NOx, the amount varying depending on the degree of air pre-mixture. Since it causes reverse ignition very easily in the pre-mixture degree corresponding to low NOx zone, development of a burner with drastically new mechanism is demanded. In hydrogen fuel cells, the ratio of hydrogen fuel cost accounting for in the power generation cost is very high. As an automobile fuel, very much leaner combustion is possible than in conventional internal combustion engines, and ignition energy is small. However, such abnormal combustion as reverse ignition and early ignition may occur, and their prevention is an important assignment. Issues in aircraft engines are verification of safety, and cost of liquefied hydrogen. Steam turbines have reached their limit already, but gas turbines are expected of exciting efficiency improvement. This paper describes prospects on chemical utilization of hydrogen in the existing fields and new fields. (NEDO)

Enhancing Engineering Students’ Reading Comprehension of English for Science and Technology With the Support of an Online Cumulative Sentence Analysis System

Directory of Open Access Journals (Sweden)

Yea-Ru Tsai

2014-09-01

Full Text Available For engineering students, reading in English is the core competence to absorb professional knowledge in academic settings and their future career, because many authentic textbooks and information about advanced technology have been published in English. The present study sets out to improve English reading comprehension among tertiary-level engineering students. An online reading strategy instruction based on cumulative sentence analysis (CSA was constructed to enhance the students’ reading comprehension of English technology texts. The comparison between the pre-test and post-test showed that the participants achieved a higher level of reading comprehension performance following the instruction. The findings clearly demonstrated that online CSA strategy instruction is an efficient and feasible approach to helping engineering students cope with their problems of reading English texts. Pedagogical implications are briefly discussed based on the findings of this study.

Innovative technology summary report: Light duty utility arm

International Nuclear Information System (INIS)

1998-01-01

The Light-Duty Utility Arm (LDUA) System is a mobile, multi-axis positioning system capable of deploying tools and sensors (end effecters) inside radioactive waste tanks for tank wall inspection, waste characterization, and waste retrieval. The LDUA robotic manipulator enters a tank through existing openings (risers) in the tank dome of the underground tanks. Using various end effecters, the LDUA System is a versatile system for high-level waste tank remediation. The LDUA System provides a means to deploy tools, while increasing the technology resources available to the U.S. Department of Energy (DOE). Ongoing end effecter development will provide additional capabilities to remediate the waste tanks

Report on the surveys in fiscal 1999 on foundations for establishing industrial technology strategies. Technological strategies by fields (Water related technology field); 1999 nendo sangyo gijutsu senryaku sakutei kiban chosa hokokusho. Bun'yabetsu gijutsu senryaku (mizu kanren gijutsu bun'ya)

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

This paper describes the surveys to establish strategies in the water related technology field. The primary question relates to realizing a circulation type water utilization society. Establishment of technologies as the element technologies is demanded on treating trace amount harmful substances and pathogenically harmful micro-organisms such as environmental hormones. Technologies requiring early practical application include high-efficiency energy recovery from sludge by means of methane fermentation, accelerated oxidation and super critical sludge decomposition, and composting. Structuring a comprehensive water management information system is also important. Establishment is demanded on such technologies as high stability sensors to treat harmful chemical substances, ultra high sensitivity bio-sensors for risk control, and detection of pathogenic micro-organisms. Alga identification and quantification systems are also necessary. In developing a contaminated environmental water and waste water purification system, early practical application is desired on technologies to purify soil and large-quantity diluted environmental waters by utilizing such natural materials as soil and activated carbons, biotope and micro-organisms. Manufacture of high function water by utilizing electromagnetic waves and ultra-sonic waves, and high-efficiency low-cost desalting technologies by means of membrane separation and evaporation are also required to be developed as water resource utilizing and water making technologies. (NEDO)

The Electronic Health Literacy and Utilization of Technology for Health in a Remote Hawaiian Community: Lana'i.

Science.gov (United States)

Witten, Nash Ak; Humphry, Joseph

2018-03-01

The Lana'i Community Health Center (LCHC) like other health care organizations, is striving to implement technology-enabled care (TEC) in the clinical setting. TEC includes such technological innovations as patient portals, mobile phone applications, wearable health sensors, and telehealth. This study examines the utilization of communication technology by members of the Lana'i community and LCHC staff and board members in the home and in their daily lives and evaluates the community's electronic health literacy. Quantitative surveys and qualitative focus groups were utilized. These revealed that members of the Lana'i community and LCHC staff and board members regularly utilize technology, in the form of smart cell phones, WiFi, and internet texting. This community has integrated technology into their daily lives, even though they live on an isolated island with 3,102 people; however, despite this integration, the electronic health literacy of this population appears insufficient for proper understanding and utilization of TEC, limiting the potential of patient portals or remote monitoring of patient generated data for chronic disease prevention and management without additional education and mentoring. It is therefore in the best interest of the LCHC and other health organizations wishing to implement TEC in a rural community such as Lana'i to include a strong educational component with use of TEC, and perhaps establish a mentor/partnership program for the highly-challenged patient.

A Study on Guidelines for the Utilization of Unproven MMIS Technology In Nuclear Power Plant Application

International Nuclear Information System (INIS)

Kang, Sung Kon; Shin, Yeong Cheol; Bae, Byoung Hwan

2007-01-01

New MMIS (Man Machine Interface System) technology is rapidly advanced as digital technology provides opportunity for more functionality and better cost effectiveness and NPP (Nuclear Power Plant) operators are inclined to use the new technology for the construction of new plant and for the upgrade of existing plants. However, this new technology poses risks to the NPP operators at the same time. These risks are mainly due to the poor reliability of newly developed technology. KHNP's past experiences with the new MMIS equipment shows many cases of reliability problem. And their consequences include unintended plant trips, lowered acceptance of the new digital technology by the plant I and C maintenance crew, and increased licensing burden in answering for questions from the nuclear regulatory body. Considering the fact that the risk of these failures in the nuclear plant operation is far greater than those in other industry, utilities require proven technology for the MMIS in nuclear power plants. So that new MMIS technology might be testified as proven technology, guidelines for the utilization of unproven MMIS technology in nuclear power plant application is required for applying new advanced MMIS technology which is apparently needed to obtain a definite gain in simplicity or performance

Solar energy utilizing technology for future cities

Energy Technology Data Exchange (ETDEWEB)

Mori, Kei

1987-11-20

This report proposes solar energy utilizing technologies for future cities, centering on a system that uses Fresnel lenses and optical fiber cables. This system selects out beams in the visible range and the energy can be sent to end terminals constantly as long as sunlight is available. Optical energy is concentrated 4,000-fold. The system can provide long-distance projection of parallel rays. It will be helpful for efficient utilization of light in cities and can increase the degree of freedom in carrying out urban development. The total efficiency for the introduction into optical fiber can be up to 40 percent. With no heating coil incorporated, there is no danger of fire. The standard size of a light condenser is 2 m in dome diameter and 2.5 m in height. Auxiliary artificial light is used for backup purposes when it is cloudy. Heat pumps operating on solar thermal energy are employed to maintain air conditioning for 24 hours a day in order to ensure the establishment of an environment where residential areas exist in the neighborhood of office areas. Seven automatic solar light collection and transfer systems are currently in practical use at the Arc Hills building. The combination of Fresnel lens and optical fiber is more than six times as high in efficiency as a reflecting mirror. (5 figs, 3 tabs, 8 photos, 6 refs)

Comprehensive Report to Congress Clean Coal Technology Program: Clean power from integrated coal/ore reduction

Energy Technology Data Exchange (ETDEWEB)

NONE

1996-10-01

This report describes a clean coal program in which an iron making technology is paired with combined cycle power generation to produce 3300 tons per day of hot metal and 195 MWe of electricity. The COREX technology consists of a metal-pyrolyzer connected to a reduction shaft, in which the reducing gas comes directly from coal pyrolysis. The offgas is utilized to fuel a combined cycle power plant.

Coupling renewables via hydrogen into utilities: Temporal and spatial issues, and technology opportunities

Energy Technology Data Exchange (ETDEWEB)

Iannucci, J.J.; Horgan, S.A.; Eyer, J.M. [Distributed Utility Associates, San Ramon, CA (United States)] [and others

1996-10-01

This paper discusses the technical potential for hydrogen used as an energy storage medium to couple time-dependent renewable energy into time-dependent electric utility loads. This analysis will provide estimates of regional and national opportunities for hydrogen production, storage and conversion, based on current and near-term leading renewable energy and hydrogen production and storage technologies. Appropriate renewable technologies, wind, photovoltaics and solar thermal, are matched to their most viable regional resources. The renewables are assumed to produce electricity which will be instantaneously used by the local utility to meet its loads; any excess electricity will be used to produce hydrogen electrolytically and stored for later use. Results are derived based on a range of assumptions of renewable power plant capacity and fraction of regional electric load to be met (e.g., the amount of hydrogen storage required to meet the Northwest region`s top 10% of electric load). For each renewable technology national and regional totals will be developed for maximum hydrogen production per year and ranges of hydrogen storage capacity needed in each year (hydroelectric case excluded). The sensitivity of the answers to the fraction of peak load to be served and the land area dedicated for renewable resources are investigated. These analyses can serve as a starting point for projecting the market opportunity for hydrogen storage and distribution technologies. Sensitivities will be performed for hydrogen production, conversion. and storage efficiencies representing current and near-term hydrogen technologies.

Achievement report on research and development of basic technologies for the next generation industries in fiscal 1981. Research and development of a recombinant DNA utilizing technology; 1981 nendo jisedai sangyo kiban gijutsu itaku kenkyu kaihatsu seika hokokusho. Kumikae DNA riyo gijutsu no kenkyu kaihatsu

Energy Technology Data Exchange (ETDEWEB)

NONE

1982-03-01

Achievements were compiled on the research in fiscal 1981 on the 'research and development of a recombinant DNA utilizing technology', which has been performed according to the 'institution for research and development of basic technologies for the next generation industries'. For the method to create energy saving type bacteria stocks for processes centering around the escherichia coli, refinement was carried out on cytochrome P-450 and NADPH-cytochrome P-450 reduction enzyme respectively from hepatic microsome of rats administered with induction agents. Attempts were made to prepare antibodies working on them. For the method to create high-efficiency secreting bacteria stocks centering around bacillus subtilis, activity measurement and quantification were performed on enzymes external to the bacillus sutilis, and research was executed on introduction of neutral protease gene sensitive to bacillus subtilis temperatures into the NA20-S17 stock. For the method to create bacteria stocks to substitute raw materials used in the chemical industry, studies were performed on separation of enzymes and corresponding genes, and incorporation of the genes into the escherichia coli. In the comprehensive investigation and research on the recombinant DNA utilizing technology, information exchange and discussions meetings were held, and investigations were made on literatures and patents. (NEDO)

Achievement report on research and development of basic technologies for the next generation industries in fiscal 1981. Research and development of a recombinant DNA utilizing technology; 1981 nendo jisedai sangyo kiban gijutsu itaku kenkyu kaihatsu seika hokokusho. Kumikae DNA riyo gijutsu no kenkyu kaihatsu

Energy Technology Data Exchange (ETDEWEB)

NONE

1982-03-01

Achievements were compiled on the research in fiscal 1981 on the 'research and development of a recombinant DNA utilizing technology', which has been performed according to the 'institution for research and development of basic technologies for the next generation industries'. For the method to create energy saving type bacteria stocks for processes centering around the escherichia coli, refinement was carried out on cytochrome P-450 and NADPH-cytochrome P-450 reduction enzyme respectively from hepatic microsome of rats administered with induction agents. Attempts were made to prepare antibodies working on them. For the method to create high-efficiency secreting bacteria stocks centering around bacillus subtilis, activity measurement and quantification were performed on enzymes external to the bacillus sutilis, and research was executed on introduction of neutral protease gene sensitive to bacillus subtilis temperatures into the NA20-S17 stock. For the method to create bacteria stocks to substitute raw materials used in the chemical industry, studies were performed on separation of enzymes and corresponding genes, and incorporation of the genes into the escherichia coli. In the comprehensive investigation and research on the recombinant DNA utilizing technology, information exchange and discussions meetings were held, and investigations were made on literatures and patents. (NEDO)

Anticipated development of radiation safety corresponding to utilization of nuclear technology in Vietnam

International Nuclear Information System (INIS)

Tran, Toan Ngoc; Le, Thiem Ngoc

2010-01-01

In the past, due to the limited application of radiation and radioisotope in the national economic branches, radiation safety was not paid much attention to in Vietnam. However, according to the Strategy for Peaceful Utilization of Atomic Energy up to 2020 approved by the Prime Minister on January 3, 2006 the application of radiation and radioisotopes as well as nuclear power in Vietnam is expected increasing strongly and widely, then radiation safety should be developed correspondingly. This paper presents the history of radiation protection, the current status and prospect of utilization of atomic energy and the anticipated development of the national radiation safety system to meet the demand of utilization of nuclear technology in Vietnam. (author)

Development for environmentally friendly and highly efficient energy utilization system in fiscal 1998. Pt. 3. Research on highly efficient and effective energy utilization technology (Research on design technology for optimal system); 1998 nendo kankyo chowagata kokoritsu energy riyo system kaihatsu. 3. Kokoritsu energy yuko riyo gijutsu no kenkyu (saiteki system sekkei gijutsu no kenkyu)

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-05-01

This paper summarizes achievements during fiscal 1998 on researching part of the energy transportation and storage technologies, energy supply and utilization technologies, environmental load reducing technologies, and optimal system design in the 'research on highly efficient and effective energy utilization technology'. With regard to energy transportation and storage technologies, researches and developments were performed on a vacuum adiabatic transportation piping system, surfactants used for high-density heat transportation and high-density latent heat transportation technologies. In the field of energy supply and utilization technologies, researches and developments were carried out on a heat supply system using high-performance heat pumps capable of using multiple kinds of fuels, and a compression and absorption type hybrid heat utilization system. For the environmental load reducing technologies, research and development were performed on a power saving heat pump system utilizing natural coolant. In researching the optimal system design technologies, overall adjustment was made on the element technologies, whereas technological discussions and site surveys were executed by the committees at the same time. The latest achievements accomplished to date was published in a book. (NEDO)

Toward a Comprehensive Framework for Evaluating the Core Integration Features of Enterprise Integration Middleware Technologies

Directory of Open Access Journals (Sweden)

Hossein Moradi

2013-01-01

Full Text Available To achieve greater automation of their business processes, organizations face the challenge of integrating disparate systems. In attempting to overcome this problem, organizations are turning to different kinds of enterprise integration. Implementing enterprise integration is a complex task involving both technological and business challenges and requires appropriate middleware technologies. Different enterprise integration solutions provide various functions and features which lead to the complexity of their evaluation process. To overcome this complexity, appropriate tools for evaluating the core integration features of enterprise integration solutions is required. This paper proposes a new comprehensive framework for evaluating the core integration features of both intra-enterprise and inter-enterprise Integration's enabling technologies, which simplify the process of evaluating the requirements met by enterprise integration middleware technologies.The proposed framework for evaluating the core integration features of enterprise integration middleware technologies was enhanced using the structural and conceptual aspects of previous frameworks. It offers a new schema for which various enterprise integration middleware technologies are categorized in different classifications and are evaluated based on their supporting level for the core integration features' criteria. These criteria include the functional and supporting features. The proposed framework, which is a revised version of our previous framework in this area, has developed the scope, structure and content of the mentioned framework.

College Student Utilization of a Comprehensive Psychiatric Emergency Program

Science.gov (United States)

Mitchell, Sharon L.; Kader, Mahrin; Haggerty, Melinda Z.; Bakhai, Yogesh D.; Warren, Calvert G.

2013-01-01

The authors sought to identify college students at risk for experiencing a mental health crisis that warranted a psychiatric evaluation at a hospital and/or a psychiatric hospitalization. A retrospective chart review of college students evaluated at a comprehensive psychiatric emergency program during a 1-year period was conducted. Demographic…

A Systems Approach to Information Technology (IT) Infrastructure Design for Utility Management Automation Systems

OpenAIRE

A. Fereidunian; H. Lesani; C. Lucas; M. Lehtonen; M. M. Nordman

2006-01-01

Almost all of electric utility companies are planning to improve their management automation system, in order to meet the changing requirements of new liberalized energy market and to benefit from the innovations in information and communication technology (ICT or IT). Architectural design of the utility management automation (UMA) systems for their IT-enabling requires proper selection of IT choices for UMA system, which leads to multi-criteria decision-makings (MCDM). In resp...

FY 1998 R and D of utilization of biological resources such as those in bioconsortia. Report on development results of techniques for utilization/production of organisms in bioconsortia; 1998 nendo fukugo seibutsukeinado seibutsu shigen riyo gijutsu kaihatsu seika hokokusho. Fukugo seibutsukei riyo seisan gijutsu no kaihatsu

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-03-01

The objectives are set to analyze functions and interactions of organisms having specific functions, to develop the techniques for isolating and cultivating the constituent organisms, and thereby to develop the techniques for their industrial utilization, in order to develop the techniques for handling organisms in bioconsortia as the techniques to utilize their functions, e.g., production and decomposition of materials, and also to develop the techniques for culturing/controlling microorganisms in bioconsortia and for strengthening their functions. The FY 1998 themes are development of the functional material production technology, and comprehensive study for the project. More concretely, the former includes histochemical analytical technology (development of techniques for detecting microorganisms in soil, and of techniques for in-situ detection/isolation of specific microorganisms in bioconsortia and for analysis their functions), isolation and culture technology (development of detection, separation and cultivation technology of microorganisms that are not easily cultured), functional substance production technology (technical utilization of microbial consortia for production of environment-friendly oil/water separation polymers), and functional material production technology (development of methods for artificial gene exchange in microbial consortia). (NEDO)

Health Information Technology Evaluation Framework (HITREF) Comprehensiveness as Assessed in Electronic Point-of-Care Documentation Systems Evaluations.

Science.gov (United States)

Sockolow, Paulina S; Bowles, Kathryn H; Rogers, Michelle

2015-01-01

We assessed the Health Information Technology (HIT) Reference-based Evaluation Framework (HITREF) comprehensiveness in two HIT evaluations in settings different from that in which the HITREF was developed. Clinician satisfaction themes that emerged from clinician interviews in the home care and the hospital studies were compared to the framework components. Across both studies, respondents commented on 12 of the 20 HITREF components within 5 of the 6 HITREF concepts. No new components emerged that were missing from the HITREF providing evidence that the HITREF is a comprehensive framework. HITREF use in a range of HIT evaluations by researchers new to the HITREF demonstrates that it can be used as intended. Therefore, we continue to recommend the HITREF as a comprehensive, research-based HIT evaluation framework to increase the capacity of informatics evaluators' use of best practice and evidence-based practice to support the credibility of their findings for fulfilling the purpose of program evaluation.

Comprehensive Utilization Technology of Solar Wall System%太阳墙系统综合利用技术

Institute of Scientific and Technical Information of China (English)

任庚坡; 房玉娜

2014-01-01

With the worsening of energy situation,renewable energy including solar is increasingly concerned . This article introduces the general situation of utilization of solar energy and a new kind of solar thermal tech-nology---solar wall system.The paper illustrates the working principles and features of the solar wall sys-tem,with cases of factory building and general building respectively.In the last part,the paper analyses the economics and Promotion potential for replication of solar wall system.Solar Wall system has good economic returns,high thermal efficiency and good fresh air effect.By combining the rooftop photovoltaic system and solar wall,photovoltaic/solar thermal utilization can be achieved,and the utilization of solar energy is im-proved.%介绍了太阳能利用概况及一种新的太阳能热利用技术---太阳墙系统，阐述其工作原理及特点，并列举在厂房和一般建筑的应用案例，分析了太阳墙的经济性和推广潜力。太阳墙系统具有经济效益好、热效率高、新风效果好的优点；通过屋顶光伏发电系统与太阳墙的结合，可实现光电/光热综合利用，提高太阳能利用率。

Feasibility survey of the environmentally-friendly coal utilization system. Feasibility survey of the environmentally-friendly coal utilization system in Indonesia; Kankyo chowagata sekitan riyo system kanosei chosa. Indonesia ni okeru kankyo chowagata sekitan riyo system kanosei chosa

Energy Technology Data Exchange (ETDEWEB)

NONE

1996-03-01

With relation to the coal of Indonesia, where the expansion of the use of coal as a substitute for petroleum/plant fuel is aimed at, the paper grasped the situation of coal production/distribution/utilization and environmental problems, and analyzed the situation of the coal utilization/spread by industry including the commercial/residential use. The purpose of the survey is to work out a comprehensive master plan including Japan`s international cooperation for introducing the environmentally-friendly coal utilization system to Indonesia. Coal utilization systems, the introduction of which Indonesia should study in future, were picked up, according to the surveys in fiscal 1993 and 1994. In commercial/residential and small-scale industry sectors, needed is improvement of carbonization technology for production of coal carbonization briquette. Moreover, the introduction of bio-briquette should be studied in the future. In the power generation sector, studies should be made on the introduction of technology for SOx/NOx reduction and technology for coal ash treatment including the effective use of coal ash. For the introduction of coal boilers, the combustion mixed with bagasse, which is abundant in amount, is also necessary. In the coal production sector, coal preparation technology is studied, and a method to select the optimum process was proposed through the simulation. 76 figs., 43 tabs.

From Natural Monopoly to Public Utility: Technological Determinism and the Political Economy of Infrastructure in Progressive-Era America.

Science.gov (United States)

Plaiss, Adam

In present-day debates regarding telecommunication policy, one frequently hears the terms natural monopoly and public utility. This article investigates the origins of these ideas, finding that Richard T. Ely-a celebrated American economist of the late nineteenth century-embedded in the term "natural monopoly" a narrative of technological determinism. By arguing that certain services had monopolizing tendencies hardwired into them, Ely argued for their regulation. Ely's theory of natural monopoly formed the basis of Wisconsin's 1907 public utilities law, which served as a model for many other states' regulatory policies. The modern notion of public utility thus carries with it the technological determinism of Ely's natural monopoly idea. By tracing the lineage of these two terms, this article recaptures the influence that activists and progressive politicians exercised over the formation of large technological systems during the Second Industrial Revolution.

A Comprehensive Ubiquitous Healthcare Solution on an Android™ Mobile Device

Directory of Open Access Journals (Sweden)

Pei-Cheng Hii

2011-06-01

Full Text Available Provision of ubiquitous healthcare solutions which provide healthcare services at anytime anywhere has become more favorable nowadays due to the emphasis on healthcare awareness and also the growth of mobile wireless technologies. Following this approach, an Android™ smart phone device is proposed as a mobile monitoring terminal to observe and analyze ECG (electrocardiography waveforms from wearable ECG devices in real time under the coverage of a wireless sensor network (WSN. The exploitation of WSN in healthcare is able to substitute the complicated wired technology, moving healthcare away from a fixed location setting. As an extension to the monitoring scheme, medicine care is taken into consideration by utilizing the mobile phone as a barcode decoder, to verify and assist out-patients in the medication administration process, providing a better and more comprehensive healthcare service.

Assistive Technologies for Aged Care: Supportive or Empowering?

Directory of Open Access Journals (Sweden)

Suchada Vichitvanichphong

2014-11-01

Full Text Available The main objective of this paper is to explore the potentials of assistive technologies to support seniors’ independent living. The work looks at two salient aspects of utilizing technologies for elderly, namely direct support and empowering technologies. The research undertakes a comprehensive analysis of attempts that have been made through investigation of the literature. For this purpose, a realist review of relevant papers published since 2000 has been conducted. The paper concludes that although much research in this area targets the direct support for older adults, the effective use of technologies to maintain seniors’ physical and cognitive abilities requires further investigations. This can provide avenues of opportunities that would empower seniors for their independent living.

UTILITY ADVANCED TURBINE SYSTEMS(ATS) TECHNOLOGY READINESS TESTING

Energy Technology Data Exchange (ETDEWEB)

Kenneth A. Yackly

2001-06-01

The following paper provides an overview of GE's H System{trademark} technology, and specifically, the design, development, and test activities associated with the DOE Advanced Turbine Systems (ATS) program. There was intensive effort expended in bringing this revolutionary advanced technology program to commercial reality. In addition to describing the magnitude of performance improvement possible through use of H System{trademark} technology, this paper discusses the technological milestones during the development of the first 9H (50Hz) and 7H (60 Hz) gas turbines. To illustrate the methodical product development strategy used by GE, this paper discusses several technologies that were essential to the introduction of the H System{trademark}. Also included are analyses of the series of comprehensive tests of materials, components and subsystems that necessarily preceded full scale field testing of the H System{trademark}. This paper validates one of the basic premises with which GE started the H System{trademark} development program: exhaustive and elaborate testing programs minimized risk at every step of this process, and increase the probability of success when the H System{trademark} is introduced into commercial service. In 1995, GE, the world leader in gas turbine technology for over half a century, in conjunction with the DOE National Energy Technology Laboratory's ATS program, introduced its new generation of gas turbines. This H System{trademark} technology is the first gas turbine ever to achieve the milestone of 60% fuel efficiency. Because fuel represents the largest individual expense of running a power plant, an efficiency increase of even a single percentage point can substantially reduce operating costs over the life of a typical gas-fired, combined-cycle plant in the 400 to 500 megawatt range. The H System{trademark} is not simply a state-of-the-art gas turbine. It is an advanced, integrated, combined-cycle system in which every

Use of smartphone technology in cardiology.

Science.gov (United States)

Nguyen, Hoang H; Silva, Jennifer N A

2016-05-01

Smartphone-based technologies along with broadband connectivity are changing the way modern cardiology is practiced. The ever broadening connectivity and increasing capabilities of smartphone-based technologies can better monitor, diagnose, and prevent cardiovascular diseases. Researchers can leverage the ubiquitous use of smartphone-based technologies and their constant stream of biometric data to establish large community-based clinical research studies. Patient engagement is enhanced with constant and on-demand access to physicians, daily self-monitoring, and expanding social networks. On the other hand, the exponential growth of smartphone-based technologies invariably disrupts the traditional healthcare model and leaves a vacuum in the infrastructure, medico-legal apparatus, and reimbursement systems that need to be addressed. In this review, we present a comprehensive discussion of the various applications utilizing smartphone-based technologies in cardiology. Copyright © 2016 Elsevier Inc. All rights reserved.

Improving Listening Comprehension through a Whole-Schema Approach.

Science.gov (United States)

Ellermeyer, Deborah

1993-01-01

Examines the development of the schema, or cognitive structure, theory of reading comprehension. Advances a model for improving listening comprehension within the classroom through a teacher-facilitated approach which leads students to selecting and utilizing existing schema within a whole-language environment. (MDM)

Instructor satisfaction with a technology-based resource for diabetes education.

Science.gov (United States)

Hall, Deanne L; Corman, Shelby L; Drab, Scott R; Meyer, Susan M; Smith, Randall B

2009-05-27

To evaluate instructor use patterns and satisfaction with DM Educate, a comprehensive, Web-based diabetes course. Instructors completed a post-course survey instrument to assess their use of course materials and components, as well as satisfaction with the course content, design, and technology utilized, and to solicit their suggestions for additional content areas. Thirty-eight percent of respondents utilized DM Educate as a standalone elective and 62% had integrated materials into existing courses. The pharmacotherapy module was the most utilized at 91% and slide sets were the most utilized course components at 63%. All instructors stated that they would use the course again the following year. Suggestions for improvement included incorporation of more active-learning activities and patient cases. Instructors' were highly satisfied with the course materials and technology used by DM Educate, a Web-based diabetes education course, and indicated they were able to customize the course materials both to establish new courses and supplement existing courses. All instructors planned to use the course again.

From Lunar Regolith to Fabricated Parts: Technology Developments and the Utilization of Moon Dirt

Science.gov (United States)

McLemore, C. A.; Fikes, J. C.; McCarley, K. S.; Good, J. E.; Gilley, S. D.; Kennedy, J. P.

2008-01-01

The U.S. Space Exploration Policy has as a cornerstone the establishment of an outpost on the moon. This lunar outpost wil1 eventually provide the necessary planning, technology development, testbed, and training for manned missions in the future beyond the Moon. As part of the overall activity, the National Aeronautics and Space Administration (NASA) is investigating how the in situ resources can be utilized to improve mission success by reducing up-mass, improving safety, reducing risk, and bringing down costs for the overall mission. Marshall Space Flight Center (MSFC), along with other NASA centers, is supporting this endeavor by exploring how lunar regolith can be mined for uses such as construction, life support, propulsion, power, and fabrication. An infrastructure capable of fabrication and nondestructive evaluation will be needed to support habitat structure development and maintenance, tools and mechanical parts fabrication, as well as repair and replacement of space-mission hardware such as life-support items, vehicle components, and crew systems, This infrastructure will utilize the technologies being developed under the In Situ Fabrication and Repair (ISFR) element, which is working in conjunction with the technologies being developed under the In Situ Resources Utilization (ISRU) element, to live off the land. The ISFR Element supports the Space Exploration Initiative by reducing downtime due to failed components; decreasing risk to crew by recovering quickly from degraded operation of equipment; improving system functionality with advanced geometry capabilities; and enhancing mission safety by reducing assembly part counts of original designs where possible. This paper addresses the need and plan for understanding the properties of the lunar regolith to determine the applicability of using this material in a fabrication process. This effort includes the development of high fidelity simulants that will be used in fabrication processes on the ground to

Propellantless Attitude Control of Solar Sail Technology Utilizing Reflective Control Devices

Science.gov (United States)

Munday, Jeremy

2016-01-01

Solar sails offer an opportunity for a CubeSatscale, propellant-free spacecraft technology that enables long-term and long-distance missions not possible with traditional methods. Solar sails operate using the transfer of linear momentum from photons of sunlight reflected from the surface of the sail. To propel the spacecraft, no mechanically moving parts, thrusters, or propellant are needed. However, attitude control, or orientation, is still performed using traditional methods involving reaction wheels and propellant ejection, which severely limit mission lifetime. For example, the current state of the art solutions employed by upcoming missions couple solar sails with a state of the art propellant ejection gas system. Here, the use of the gas thruster has limited the lifetime of the mission. To solve the limited mission lifetime problem, the Propellantless Attitude Control of Solar Sail Technology Utilizing Reflective Control Devices project team is working on propellantless attitude control using thin layers of material, an optical film, electrically switchable from transparent to reflective. The technology is based on a polymer-dispersed liquid crystal (PDLC), which allows this switch upon application of a voltage. This technology removes the need for propellant, which reduces weight and cost while improving performance and lifetime.

LARGE-SCALE MECURY CONTROL TECHNOLOGY TESTING FOR LIGNITE-FIRED UTILITIES-OXIDATION SYSTEMS FOR WET FGD

Energy Technology Data Exchange (ETDEWEB)

Michael J. Holmes; Steven A. Benson; Jeffrey S. Thompson

2004-03-01

The Energy & Environmental Research Center (EERC) is conducting a consortium-based effort directed toward resolving the mercury (Hg) control issues facing the lignite industry. Specifically, the EERC team--the EERC, EPRI, URS, ADA-ES, Babcock & Wilcox, the North Dakota Industrial Commission, SaskPower, and the Mercury Task Force, which includes Basin Electric Power Cooperative, Otter Tail Power Company, Great River Energy, Texas Utilities (TXU), Montana-Dakota Utilities Co., Minnkota Power Cooperative, BNI Coal Ltd., Dakota Westmoreland Corporation, and the North American Coal Company--has undertaken a project to significantly and cost-effectively oxidize elemental mercury in lignite combustion gases, followed by capture in a wet scrubber. This approach will be applicable to virtually every lignite utility in the United States and Canada and potentially impact subbituminous utilities. The oxidation process is proven at the pilot-scale and in short-term full-scale tests. Additional optimization is continuing on oxidation technologies, and this project focuses on longer-term full-scale testing. The lignite industry has been proactive in advancing the understanding of and identifying control options for Hg in lignite combustion flue gases. Approximately 1 year ago, the EERC and EPRI began a series of Hg-related discussions with the Mercury Task Force as well as utilities firing Texas and Saskatchewan lignites. This project is one of three being undertaken by the consortium to perform large-scale Hg control technology testing to address the specific needs and challenges to be met in controlling Hg from lignite-fired power plants. This project involves Hg oxidation upstream of a system equipped with an electrostatic precipitator (ESP) followed by wet flue gas desulfurization (FGD). The team involved in conducting the technical aspects of the project includes the EERC, Babcock & Wilcox, URS, and ADA-ES. The host sites include Minnkota Power Cooperative Milton R. Young

Acceptance and Utilization of Technology (UTAUT) as a Method of Technology Acceptance Model of Mitigation Disaster Website

Science.gov (United States)

Siswanto, T.; Shofiati, R.; Hartini, H.

2018-01-01

www.mitigasi-bencana.com as a knowledge management website created based on survey results in April-July 2014 in East Java and Central Java provinces, indicates a gap between the expectations and reality that exist in the services provided by the regional disaster management agency. Based on condition analysis, the gaps that occur can be reduced if the community has the understanding and knowledge of adequate disaster mitigation. The problem that arises later is whether the chosen technology solution is appropriate and acceptable to the public? The methodology used in this study using the Technology Acceptance Model development is the Unified Theory of Acceptance and Utilization of Technology (UTAUT). Feedback obtained from respondents KarangTaruna youth SelogedongBantul, www.mitigasi-bencana.com can be accepted by the respondents, but from processed data is obtained only UTAUT hypotheses on the relationship dimension eligible for Social Expectancy on the Attitude toward technology, which means the higher the perception of the Social Expectancy, the higher the perception of the Attitude toward technology. Because www.mitigasi-bencana.com is new socialized so that society still need time to explore content information and knowledge contained therein. To be accepted by user, a knowledge management application must prepare various aspects of Performance Expectancy, Effort Expectancy, Social Factors, Facilitating Conditions and Attitude.

Assistive technology evaluations: Remote-microphone technology for children with Autism Spectrum Disorder.

Science.gov (United States)

Schafer, Erin C; Wright, Suzanne; Anderson, Christine; Jones, Jessalyn; Pitts, Katie; Bryant, Danielle; Watson, Melissa; Box, Jerrica; Neve, Melissa; Mathews, Lauren; Reed, Mary Pat

The goal of this study was to conduct assistive technology evaluations on 12 children diagnosed with Autism Spectrum Disorder (ASD) to evaluate the potential benefits of remote-microphone (RM) technology. A single group, within-subjects design was utilized to explore individual and group data from functional questionnaires and behavioral test measures administered, designed to assess school- and home-based listening abilities, once with and once without RM technology. Because some of the children were unable to complete the behavioral test measures, particular focus was given to the functional questionnaires completed by primary teachers, participants, and parents. Behavioral test measures with and without the RM technology included speech recognition in noise, auditory comprehension, and acceptable noise levels. The individual and group teacher (n=8-9), parent (n=8-9), and participant (n=9) questionnaire ratings revealed substantially less listening difficulty when RM technology was used compared to the no-device ratings. On the behavioral measures, individual data revealed varied findings, which will be discussed in detail in the results section. However, on average, the use of the RM technology resulted in improvements in speech recognition in noise (4.6dB improvement) in eight children, higher auditory working memory and comprehension scores (12-13 point improvement) in seven children, and acceptance of poorer signal-to-noise ratios (8.6dB improvement) in five children. The individual and group data from this study suggest that RM technology may improve auditory function in children with ASD in the classroom, at home, and in social situations. However, variability in the data and the inability of some children to complete the behavioral measures indicates that individualized assistive technology evaluations including functional questionnaires will be necessary to determine if the RM technology will be of benefit to a particular child who has ASD. Copyright �

Utility of the comprehensive marijuana motives questionnaire among medical cannabis patients.

Science.gov (United States)

Bohnert, Kipling M; Bonar, Erin E; Arnedt, J Todd; Conroy, Deirdre A; Walton, Maureen A; Ilgen, Mark A

2018-01-01

Little is known about motives for cannabis use among the population of adults using cannabis medically. Therefore, we evaluated the performance of the 12 factor, 36-item Comprehensive Marijuana Motives Questionnaire (CMMQ) among a sample of medical cannabis patients. Study participants were adults ages 21years or older with scheduled appointments to obtain new or renewed medical cannabis certification from clinics in one Midwestern state (n=1116). Confirmatory factor analysis was used to evaluate properties of the CMMQ. Multiple regressions were used to estimate associations between motives and cannabis use, physical health functioning, and mental health functioning. Fit indices were acceptable, and factor loadings ranged from 0.57 to 0.94. Based on regression analyses, motives accounted for 7% of the variance in recent cannabis use, and independent of cannabis use, accounted for 5% and 19% of physical and mental health functioning, respectively. Regression analyses also revealed that distinct motives were associated with cannabis use and physical and mental health functioning. Among adults seeking medical cannabis certification, the factor structure of the CMMQ was supported, and consistent with prior studies of adolescents and young adults using cannabis recreationally. Thus, individuals who use cannabis medically may have diverse reasons for use that extend beyond the management of medical symptoms. In addition, coping and sleep-related motives may be particularly salient for this population. Findings support the utility of the CMMQ in future research on medical cannabis use; however, expansion of the scale may be needed to address medical motives for use. Published by Elsevier Ltd.

ASSESSMENT OF CONTROL TECHNOLOGIES FOR REDUCING EMISSIONS OF SO2 AND NOX FROM EXISTING COAL-FIRED UTILITY BOILERS

Science.gov (United States)

The report reviews information and estimated costs on 15 emissioncontrol technology categories applicable to existing coal-fired electric utility boilers. he categories include passive controls such as least emission dispatching, conventional processes, and emerging technologies ...

Utilization of microbial lebensraum. Modern developments in biologic technologies

Energy Technology Data Exchange (ETDEWEB)

Praeve, P [Farbwerke Hoechst A.G., Frankfurt am Main (Germany, F.R.)

1977-04-01

Microbiology was in former times nearly exclusively used in the region of food and for the production of antibiotics. Biomass production must be seen as a key development among the new biotechnologies. Biomass consists of high-fat and protein-rich microorganisms, which can serve as animal feed. These microorganisms not only grow on cellulose wastes and other biological basic substrates but also on mineral oil and methanol. The energy consumption is relatively low. The increasing knowledge of the problems of one-way-technologies for our time makes todays biotechnology seem to be a very promising development. Biotechnology utilizes the cyclic metabolic way of the microorganisms and can in many cases lead back waste products to natural circulation.

Effectiveness and feasibility of utilizing E4D technology as a teaching tool in a preclinical dental education environment.

Science.gov (United States)

Callan, Richard S; Palladino, Christie L; Furness, Alan R; Bundy, Emily L; Ange, Brittany L

2014-10-01

Recent efforts have been directed towards utilizing CAD/CAM technology in the education of future dentists. The purpose of this pilot study was to investigate the feasibility of implementing CAD/CAM technology in instruction on preparing a tooth for restoration. Students at one dental school were assigned access to CAD/CAM technology vs. traditional preparation methods in a randomized, crossover design. In a convenience sample of a second-year class, seventy-six of the seventy-nine students volunteered to participate, for a response rate of 96 percent. Two analyses were performed on this pilot data: a primary effectiveness analysis comparing students' competency exam scores by intervention group (intention-to-treat analysis) and a secondary efficacy analysis comparing competency exam scores among students who reported using CAD/CAM versus those who did not. The effectiveness analysis showed no difference in outcomes by intervention group assignment. While student survey results indicated interest in utilizing the technology, the actual utilization rate was much less than one might anticipate, yielding a sample size that limited statistical power. The secondary analysis demonstrated higher mean competency exam scores for students reporting use of CAD/CAM compared to those who did not use the technology, but these results did not reach statistical significance (p=0.075). Prior research has investigated the efficacy of CAD/CAM in a controlled educational trial, but this study adds to the literature by investigating student use of CAD/CAM in a real-world, self-study fashion. Further studies should investigate ways in which to increase student utilization of CAD/CAM and whether or not increased utilization, with a larger sample size, would yield significant outcomes.

JV Task 126 - Mercury Control Technologies for Electric Utilities Burning Bituminous Coal

Energy Technology Data Exchange (ETDEWEB)

Jason Laumb; John Kay; Michael Jones; Brandon Pavlish; Nicholas Lentz; Donald McCollor; Kevin Galbreath

2009-03-29

The EERC developed an applied research consortium project to test cost-effective mercury (Hg) control technologies for utilities burning bituminous coals. The project goal was to test innovative Hg control technologies that have the potential to reduce Hg emissions from bituminous coal-fired power plants by {ge}90% at costs of one-half to three-quarters of current estimates for activated carbon injection (ACI). Hg control technology evaluations were performed using the EERC's combustion test facility (CTF). The CTF was fired on pulverized bituminous coals at 550,000 Btu/hr (580 MJ/hr). The CTF was configured with the following air pollution control devices (APCDs): selective catalytic reduction (SCR) unit, electrostatic precipitator (ESP), and wet flue gas desulfurization system (WFDS). The Hg control technologies investigated as part of this project included ACI (three Norit Americas, Inc., and eleven Envergex sorbents), elemental mercury (Hg{sup 0}) oxidation catalysts (i.e., the noble metals in Hitachi Zosen, Cormetech, and Hitachi SCR catalysts), sorbent enhancement additives (SEAs) (a proprietary EERC additive, trona, and limestone), and blending with a Powder River Basin (PRB) subbituminous coal. These Hg control technologies were evaluated separately, and many were also tested in combination.

Digital Divide in the Utilization of Information and Communication Technology (ICT) in Counsellor Education in Nigerian Universities

Science.gov (United States)

Eyo, Mfon

2014-01-01

This study investigated digital divide in the utilization of Information and Communication Technology (ICT) in counsellor education in Nigerian universities. It had two research questions and two hypotheses tested at 0.05 level of significance. It adopted a survey design and used ICT Utilization Questionnaire (IUQ) in gathering data from the…

The Utilization of Urine Processing for the Advancement of Life Support Technologies

Science.gov (United States)

Grossi-Soyster, Elysse; Hogan, John; Flynn, Michael

2014-01-01

The success of long-duration missions will depend on resource recovery and the self-sustainability of life support technologies. Current technologies used on the International Space Station (ISS) utilize chemical and mechanical processes, such as filtration, to recover potable water from urine produced by crewmembers. Such technologies have significantly reduced the need for water resupply through closed-loop resource recovery and recycling. Harvesting the important components of urine requires selectivity, whether through the use of membranes or other physical barriers, or by chemical or biological processes. Given the chemical composition of urine, the downstream benefits of urine processing for resource recovery will be critical for many aspects of life support, such as food production and the synthesis of biofuels. This paper discusses the beneficial components of urine and their potential applications, and the challenges associated with using urine for nutrient recycling for space application.

Comprehensive support for nuclear decommissioning based on 3D simulation and advanced user interface technologies

International Nuclear Information System (INIS)

Szőke, István; Louka, Michael N.; Bryntesen, Tom-Robert; Edvardsen, Svein-Tore; Bratteli, Joachim

2015-01-01

There is an increasing international focus on the need to optimise decommissioning strategies, driven by the anticipation of high costs and major effort for the decommissioning of nuclear facilities in the coming decades. The goals are to control and mitigate costs and negative impacts on workers, the general public, and the environment. The methods presently employed for many decommissioning tasks do not apply the latest advancements of science and technology. Therefore, there is growing interest in research and development into the adoption of novel techniques for improving safety, reducing costs, and increasing transparency. This paper provides a comprehensive overview of the authors' results from investigating how current and emerging technologies can be applied to enhance the international decommissioning strategy, focussing in particular on three-dimensional simulation, virtual reality, advanced user interfaces, mobile and wearable devices, and geographical information systems. Our results demonstrate that emerging technologies have great potential for supporting adoption of new instrumentation, improving data and knowledge management, optimising project plans, briefing and training field operators, and for communication, surveillance, and education in general. (author)

FY1995 research report on the survey of cryogenic energy utilization systems for environmentally friendly energy community project. Case studies of LNG cryogenic energy cascade-wise utilization; 1995 nendo kankyo chowagata energycommunity jigyo ni kakawaru reinetsu riyo system kento chosa hokokusho. LNG reinetsu no cascade teki riyo case study

Energy Technology Data Exchange (ETDEWEB)

NONE

1996-03-01

Japan's import of LNG (liquefied natural gas) has increased in these 15 years from 13-million tons to 43-million tons at a high rate of 2-million tons a year. At present LNG is used only in power generation and town gas business, and its cryogenic feature which may be useful in various fields is not being utilized. In this survey, factors impeding the wider application of the cryogenic energy are investigated, methods for using the energy more widely and mechanisms required therefor are studied, and discussion is made about the feasibility of the utilization of the energy in a cascade-wise form under the environmentally friendly energy community project. Researches are conducted and the results are evaluated in a study carried out on the comprehensive utilization of LNG cryogenic energy. These researches involve the actualities and trends of LNG cryogenic energy utilization in Japan; current status and prospect of the involvement of LNG bases with their neighboring industries and communities; technological measures for cryogenic energy utilization; technological measures related to low-temperature media and cold heat transportation systems; technological measures for the cascade-wise multidirectional utilization of cryogenic energy; and case studies on assumed local models. (NEDO)

Technology-Induced Errors and Adverse Event Reporting in an Organizational Learning Perspective.

Science.gov (United States)

Vinther, Line Dausel; Jensen, Christian Møller; Hjelmager, Ditte Meulengracht; Lyhne, Nicoline; Nøhr, Christian

2017-01-01

This paper addresses the possibilities of evaluating technology-induced errors, through the utilization of experiences of the Danish adverse event reporting system. The learning loop in the adverse event reporting system is identified and analyzed, to examine which elements can be utilized to evaluate technologies. The empirical data was collected through interviews and a workshop with members of the nursing staff at a nursing home in Aalborg, Denmark. It was found that, the establishment of sustainable feedback learning loops depends on shared visions in the organization and how creating shared visions requires involvement and participation. Secondly, care workers must possess fundamental knowledge about the technologies available to them. Thirdly comprehensive classification of adverse events should be established to allow for a systematic and goal directed feed-back process.

Conceptual and empirical themes regarding the design of technology transfer programs : a review of wood utilization research in the United States

Science.gov (United States)

Paul V. Ellefson; Michael A. Kilgore; Kenneth E. Skog; Christopher D. Risbrudt

2011-01-01

Transfer of technologies produced by research is critical to innovation within all organizations. The intent of this paper is to take stock of the conceptual underpinnings of technology transfer processes as they relate to wood utilization research and to identify conditions that promote the successful transfer of research results. Conceptually, research utilization...

A Comparison of Undergraduate Faculty and Millennial Students regarding the Utilization of Weblog and Podcast Technology in a Teacher Education Department

Science.gov (United States)

Ennis, Leslie Sturdivant; Gambrell, Elizabeth Anne

2010-01-01

The main objective of the study was to compare the utilization of weblog and podcast technology by undergraduate university faculty and Millennial college students. The study was conducted to test the hypothesis, formed from existing literature, that there might be a difference in the utilization of weblog and podcast technology between faculty…

Expanding technology in the ICU: the case for the utilization of telemedicine.

Science.gov (United States)

Deslich, Stacie; Coustasse, Alberto

2014-05-01

Telemedicine has been utilized in various healthcare areas to achieve better patient outcomes, lower costs of providing services, and increase patient access to care. Tele-intensive care unit (ICU) technology has been introduced as a way to provide effective ICU services to patients with reduced access, as well as to decrease costs and improve patient care. The methodology for this qualitative study was a literature search and review of case studies. The search was limited to sources published in the last 10 years (2003-2013) in the English language. In total, 55 references were used for this research exploration inquiry. Tele-ICU was found to be an effective way to use technology to decrease costs of providing intensive care, while improving patient outcomes such as mortality and length of stay. Several case studies supported the use of telemedicine in ICUs to provide intensive care to patients who lived in rural areas and lacked access to traditional ICUs. Furthermore, it was noted that, although the initial costs for tele-ICU startup were significant, as much as $100,000 per bed, the benefits of the utilization of this technology can offset those costs by reducing costs by 24% via decreased length of stay for patients. The findings of this study have suggested that the implementation of tele-ICU may have been more beneficial than costly, and it may have provided healthcare organizations the opportunity to increase quality of care and decrease mortality, while it might have decreased costs of delivering ICU services in both rural and urban areas.

Integrated design and optimization of technologies for utilizing low grade heat in process industries

International Nuclear Information System (INIS)

Kwak, Dong-Hun; Binns, Michael; Kim, Jin-Kuk

2014-01-01

Highlights: • Implementation of a modeling and design framework for the utilization of low grade heat. • Application of process simulator and optimization techniques for the design of technologies for heat recovery. • Systematic and holistic exploitation for the recovery of industrial low grade heat. • Demonstration of the applicability and benefit of integrated design and optimization framework through a case study. - Abstract: The utilization of low grade heat in process industries has significant potential for improving site-wide energy efficiency. This paper focuses on the techno-economic analysis of key technologies for energy recovery and re-use, namely: Organic Rankine Cycles (ORC), boiler feed water heating, heat pumping and absorption refrigeration in the context of process integration. Process modeling and optimization in a holistic manner identifies the optimal integrated configuration of these technologies, with rigorous assessment of costs and technical feasibility of these technologies. For the systematic screening and evaluation of design options, detailed process simulator models are evaluated and optimization proceeds subject to design constraints for the particular economic scenarios where technology using low grade heat is introduced into the process site. Case studies are presented to illustrate how the proposed modeling and optimization framework can be useful and effective in practice, in terms of providing design guidelines and conceptual insights for the application of technologies using low grade heat. From the case study, the best options during winter are the ORC giving a 6.4% cost reduction for the ideal case with low grade heat available at a fixed temperature and boiler feed water heating giving a 2.5% cost reduction for the realistic case with low grade heat available at a range of temperatures. Similarly during summer boiler feed water heating was found to be the best option giving a 3.1% reduction of costs considering a

Proceedings of the advanced research and technology development direct utilization, instrumentation and diagnostics contractors' review meeting

Energy Technology Data Exchange (ETDEWEB)

Geiling, D.W. (USDOE Morgantown Energy Technology Center, WV (USA)); Goldberg, P.M. (eds.) (USDOE Pittsburgh Energy Technology Center, PA (USA))

1990-01-01

The 1990 Advanced Research and Technology Development (AR TD) Direct Utilization, and Instrumentation and Diagnostics Contractors Review Meeting was held September 16--18, 1990, at the Hyatt at Chatham Center in Pittsburgh, PA. The meeting was sponsored by the US Department of Energy (DOE), Office of Fossil Energy, and the Pittsburgh and Morgantown Energy Technology Centers. Each year the meeting provides a forum for the exchange of information among the DOE AR TD contractors and interested parties. This year's meeting was hosted by the Pittsburgh Energy Technology Center and was attended by 120 individuals from industry, academia, national laboratories, and other governmental agencies. Papers were presented on research addressing coal surface, science, devolatilization and combustion, ash behavior, emission controls for gases particulates, fluid bed combustion and utilization in diesels and turbines. Individual reports are processed separately for the data bases.

Examining Stakeholder Perceptions of Accessibility and Utilization of Computer and Internet Technology in the Selinsgrove Area School District

Science.gov (United States)

Krause, Lorinda M.

2014-01-01

This study utilized a mixed methods approach to examine the issue of how parents, students, and teachers (stakeholders) perceive accessibility and the utilization of computer and Internet technology within the Selinsgrove, Pennsylvania Area School District. Quantitative data was collected through the use of questionnaires distributed to the…

Skylab medical technology utilization

Science.gov (United States)

Stonesifer, J. C.

1974-01-01

To perform the extensive medical experimentation on man in a long-term, zero-g environment, new medical measuring and monitoring equipment had to be developed, new techniques in training and operations were required, and new methods of collecting and analyzing the great amounts of medical data were developed. Examples of technology transfers to the public sector resulted from the development of new equipment, methods, techniques, and data. This paper describes several of the examples that stemmed directly from Skylab technology.

A novel comprehensive utilization of vanadium slag: As gamma ray shielding material

Energy Technology Data Exchange (ETDEWEB)

Dong, Mengge [School of Metallurgy, Northeastern University, Shenyang 110004 (China); Liaoning Key Laboratory of Metallurgical Resources Recycling Science, Shenyang 110004 (China); Xue, Xiangxin, E-mail: xuexx@mail.neu.edu.cn [School of Metallurgy, Northeastern University, Shenyang 110004 (China); Liaoning Key Laboratory of Metallurgical Resources Recycling Science, Shenyang 110004 (China); Yang, He; Liu, Dong [School of Metallurgy, Northeastern University, Shenyang 110004 (China); Liaoning Key Laboratory of Metallurgical Resources Recycling Science, Shenyang 110004 (China); Wang, Chao [Institute of Metal Research, Chinese Academy of Sciences, Shenyang 110016 (China); Li, Zhefu [Institute of Applied Physics, Chinese Academy of Sciences, Shanghai 201800 (China)

2016-11-15

Highlights: • A novel comprehensive utilization method for vanadium slag is proposed. • Shielding properties of vanadium slag are better than ordinary concrete. • HVL of vanadium slag is between Lead and concrete to shield {sup 60}Co gamma ray. • HVL of composite is higher than concrete when adding amount of vanadium slag is 900. • Composite can be used as injecting mortar for cracks developed in concrete shields. - Abstract: New exploration of vanadium slag as gamma ray shielding material was proposed, the shielding properties of vanadium slag was higher than concrete when the energy of photons was in 0.0001 MeV–100000 MeV. Vanadium slag/epoxy resin composites were prepared, shielding and material properties of materials were tested by {sup 60}Co gamma ray, simultaneous DSC-TGA, electronic universal testing machine and scanning electron microscopy, respectively. The results showed that the shielding properties of composite would be better with the increase of vanadium slag addition amount. The HVL (half value layer thickness) of vanadium slag was between Lead and concrete while composite was higher than concrete when the addition amount of vanadium slag was 900 used as material to shield {sup 60}Co gamma ray, also the resistance temperature of composite was about 215 °C and the bending strength was over 10 MPa. The composites could be used as injecting mortar for cracks developed in biological concrete shields, coating for the floor of the nuclear facilities, and shielding materials by itself.

Addressing water quality issues on a watershed basis: a comprehensive approach for utilizing chapter 20 of the Michigan drain code

International Nuclear Information System (INIS)

McCulloch, J.P.

2002-01-01

There are five major watersheds in Oakland County. They are the Clinton, Flint, Huron, Rouge and Shiawassee. Included in these watersheds are 61 individual cities, villages and townships. Actions taken by one community within the watershed have a significant impact on other communities in the watershed. Consequently, a multi-community approach needs to be identified and utilized to comprehensively address public health and water quality issues. Some of the issues faced by these communities individually include stormwater management, flooding, drainage, and river and stream management. Failing septic systems, illicit connections causing groundwater contamination, and habitat and wetland degradation are also primary concerns. Finally, wastewater treatment capacity and sanitary sewer service also are regularly dealt with by these communities. Traditionally, short-term solutions to these often urgent problems required the construction of relief sewers or temporary retention structures. Unfortunately, solving the problem in one area often meant the creation of new problems downstream. Coordinating efforts among these 61 individual communities is difficult. These difficult challenges are best met with a coordinated, comprehensive plan. (author)

The role of utilities in enabling technology innovation: The BC hydro alternative & emerging energy strategy

Energy Technology Data Exchange (ETDEWEB)

Tu, Alex; Leclair, Donna; Morrison, Allison

2010-09-15

In order for renewable energy to play a dominant role in the global electricity supply mix, emerging renewable energy technologies - such as wave, tidal, enhanced geothermal, and 3rd generation photovoltaic technologies - must prove their technical merits and achieve cost parity with conventional sources of supply. BC Hydro, a government-owned electric utility, launched an Alternative and Emerging Energy Strategy that describes its role as an enabler of technology innovation. This paper describes BC Hydro's goal, objectives and actions to accelerate the commercialization that will yield a diversity of supply options and a growing, local clean-tech cluster.

Comprehensive investigation of the corrosion and surface chemical effects of the decontamination technologies

International Nuclear Information System (INIS)

Szabo-Nagy, Andrea; Varga, Kalman; Deak-Horvath, Emese; Nemeth, Zoltan; Horvath, David; Schunk, Janos; Patek, Gabor

2012-09-01

Decontamination technologies are mainly developed to reduce the collective dose of the maintenance personnel at NPPs. The highest efficiency (i.e., the highest DF values) available without detrimental modification of the treated surface of structural material is the most important goal in the course of the application of a decontamination technology. A so-called 'soft' chemical decontamination technology has been developed - supported by the Paks Nuclear Power Plant - at the Institute of Radiochemistry and Radioecology of the University of Pannonia. The novel base technology can be effectively applied for the decontamination of the heat exchanger tubes of steam generators. In addition, by optimizing the main technological parameters (temperature, concentration of the liquid chemicals, flow rates, contact time, etc.) it can be utilized for specific applications such as decontamination of some dismountable devices and separable equipment or the total decontamination prior to plant dismantling (decommissioning) in the future. The aim of this work is to compare the efficiency, corrosion and surface chemical effects of some improved versions of the novel base-technology elaborated for decontamination of austenitic stainless steel surfaces. The experiments have been performed at laboratory conditions in decontamination model systems. The applied methods: γ-spectrometry, ICP-OES, voltammetry and SEM-EDX. The experimental results revealed that the efficiency of the base-technology mainly depends on the surface features of the stainless steel samples such as the chemical composition and thickness of the oxide layer, the nature (quantity, morphology and chemical composition) of the crystalline deposits. It has been documented that the improved version of the base-technology are suitable for the decontamination of both steel surfaces covered by chemically resistant large Cr-content crystals and that having compact oxide-layers (up to a thickness of 10 �

DEMONSTRATION OF SORBENT INJECTION TECHNOLOGY ON A TANGENTIALLY COAL-FIRED UTILITY BOILER (YORKTOWN LIMB DEMONSTRATION)

Science.gov (United States)

The report summarizes activities conducted and results achieved in an EPA-sponsored program to demonstrate Limestone Injection Multistage Burner (LIMB) technology on a tangentially fired coal-burning utility boiler, Virginia Power's 180-MWe Yorktown Unit No. 2. his successfully d...

TEST DESIGN FOR ENVIRONMENTAL TECHNOLOGY VERIFICATION (ETV) OF ADD-ON NOX CONTROL UTILIZING OZONE INJECTION

Science.gov (United States)

The paper discusses the test design for environmental technology verification (ETV) of add-0n nitrogen oxides (NOx) control utilizing ozone injection. (NOTE: ETV is an EPA-established program to enhance domestic and international market acceptance of new or improved commercially...

Performance-based ratemaking for electric utilities: Review of plans and analysis of economic and resource-planning issues. Volume 1

Energy Technology Data Exchange (ETDEWEB)

Comnes, G.A.; Stoft, S.; Greene, N. [Lawrence Berkeley Lab., CA (United States). Energy and Environment Div.; Hill, L.J. [Lawrence Berkeley Lab., CA (United States). Energy and Environment Div.]|[Oak Ridge National Lab., TN (United States). Energy Div.

1995-11-01

Performance-Based Ratemaking (PBR) is a form of utility regulation that strengthens the financial incentives to lower rates, lower costs, or improve nonprice performance relative traditional regulation, which the authors call cost-of-service, rate-of-return (COS/ROR) regulation. Although the electric utility industry has considerable experience with incentive mechanisms that target specific areas of performance, implementation of mechanisms that cover a comprehensive set of utility costs or services is relatively rare. In recent years, interest in PBR has increased as a result of growing dissatisfaction with COS/ROR and as a result of economic and technological trends that are leading to more competition in certain segments of the electricity industry. In addition, incentive regulation has been used with some success in other public utility industries, most notably telecommunications in the US and telecommunications, energy, and water in the United Kingdom. In this report, the authors analyze comprehensive PBR mechanisms for electric utilities in four ways: (1) they describe different types of PBR mechanisms, (2) they review a sample of actual PBR plans, (3) they consider the interaction of PBR and utility-funded energy efficiency programs, and (4) they examine how PBR interacts with electric utility resource planning and industry restructuring. The report should be of interest to technical staff of utilities and regulatory commissions that are actively considering or designing PBR mechanisms. 16 figs., 17 tabs.

DOCUMENTING LIVING MONUMENTS IN INDONESIA: METHODOLOGY FOR SUSTAINABLE UTILITY

Directory of Open Access Journals (Sweden)

F. Suryaningsih

2013-07-01

Full Text Available The systematic documentation of cultural heritage in Indonesia has been developed after the establishment of Bataviaasch Genootschap van Kunsten en Wetenschappen (1778 and De Oudheidkundige Dienst (1913 by the Netherlands Indies government. After Indonesian independent, the tasks of cultural heritage documentation take over by The Ministry of Culture (now become The Ministry of Education of Culture with focus on the ancient and classical heritage, so called dead monument. The needed of comprehensive documentation data regarding cultural heritage become significant issues since the government and private sector pay attention to the preservation of heritage building in the urban site, so called living monument. The archives of original drawing plan many times do not fit with the existing condition, while the conservation plan demands a document such as built drawing plan to work on. The technology, methodology and system to provide such comprehensive document of heritage building and site become important, to produce good conservation plan and heritage building regular maintenance. It means the products will have a sustainable and various utility values. Since 1994, Documentation Centre for Architecture – Indonesia (PDA, has established to meet the needs of a comprehensive data of heritage building (living monuments, to utilized as basic document for conservation planning. Not only provide document of the digital drawing such site plan, plan, elevation, section and details of architecture elements, but also document of historic research, material analysis and completed with diagnosis and mapping of building damages. This manuscript is about PDA field experience, working in this subject issue

Documenting Living Monuments in Indonesia: Methodology for Sustainable Utility

Science.gov (United States)

Suryaningsih, F.; Purwestri, N.

2013-07-01

The systematic documentation of cultural heritage in Indonesia has been developed after the establishment of Bataviaasch Genootschap van Kunsten en Wetenschappen (1778) and De Oudheidkundige Dienst (1913) by the Netherlands Indies government. After Indonesian independent, the tasks of cultural heritage documentation take over by The Ministry of Culture (now become The Ministry of Education of Culture) with focus on the ancient and classical heritage, so called dead monument. The needed of comprehensive documentation data regarding cultural heritage become significant issues since the government and private sector pay attention to the preservation of heritage building in the urban site, so called living monument. The archives of original drawing plan many times do not fit with the existing condition, while the conservation plan demands a document such as built drawing plan to work on. The technology, methodology and system to provide such comprehensive document of heritage building and site become important, to produce good conservation plan and heritage building regular maintenance. It means the products will have a sustainable and various utility values. Since 1994, Documentation Centre for Architecture - Indonesia (PDA), has established to meet the needs of a comprehensive data of heritage building (living monuments), to utilized as basic document for conservation planning. Not only provide document of the digital drawing such site plan, plan, elevation, section and details of architecture elements, but also document of historic research, material analysis and completed with diagnosis and mapping of building damages. This manuscript is about PDA field experience, working in this subject issue

Japanese utilities' plutonium utilization program

International Nuclear Information System (INIS)

Matsuo, Yuichiro.

1996-01-01

Japan's 10 utility companies are working and will continue to work towards establishing a fully closed nuclear fuel cycle. The key goals of which are: (1) reprocessing spent fuel; (2) recycling recovered uranium and plutonium; and (3) commercializing fast breeder technology by around the year 2030. This course of action by the Japanese electric power industry is in full accordance with Japan's national policy outlined in the government's report ''The Long-Term Program for Research, Development, and Nuclear Energy,'' which was published in June 1994. The Japanese civilian nuclear program is a long-term program that looks into the 21st century and beyond. It is quite true that sustaining the recycling option for energy security and the global environment demands a large investment. For it to be accepted by the public, safety must be the highest priority and will be pursued at a great cost if necessary. In its history, Japan has learned that as technology advances, costs will come down. The Japanese utility industry will continue investment in technology without compromising safety until the recycling option becomes more competitive with other options. This effort will be equally applied to the development of the commercial FBRs. The Japanese utility industry is confident that Japan's stable policy and strong objective to develop competitive and peaceful technology will contribute to the global economy and the environment without increasing the threat of plutonium proliferation

ECUT (Energy Conversion and Utilization Technologies) program: Biocatalysis project

Science.gov (United States)

Baresi, Larry

1989-03-01

The Annual Report presents the fiscal year (FY) 1988 research activities and accomplishments, for the Biocatalysis Project of the U.S. Department of Energy, Energy Conversion and Utilization Technologies (ECUT) Division. The ECUT Biocatalysis Project is managed by the Jet Propulsion Laboratory, California Institute of Technology. The Biocatalysis Project is a mission-oriented, applied research and exploratory development activity directed toward resolution of the major generic technical barriers that impede the development of biologically catalyzed commercial chemical production. The approach toward achieving project objectives involves an integrated participation of universities, industrial companies and government research laboratories. The Project's technical activities were organized into three work elements: (1) The Molecular Modeling and Applied Genetics work element includes research on modeling of biological systems, developing rigorous methods for the prediction of three-dimensional (tertiary) protein structure from the amino acid sequence (primary structure) for designing new biocatalysis, defining kinetic models of biocatalyst reactivity, and developing genetically engineered solutions to the generic technical barriers that preclude widespread application of biocatalysis. (2) The Bioprocess Engineering work element supports efforts in novel bioreactor concepts that are likely to lead to substantially higher levels of reactor productivity, product yields and lower separation energetics. Results of work within this work element will be used to establish the technical feasibility of critical bioprocess monitoring and control subsystems. (3) The Bioprocess Design and Assessment work element attempts to develop procedures (via user-friendly computer software) for assessing the energy-economics of biocatalyzed chemical production processes, and initiation of technology transfer for advanced bioprocesses.

How comprehensive are research studies investigating the efficacy of technology-enhanced learning resources in anatomy education? A systematic review.

Science.gov (United States)

Clunie, Lauren; Morris, Neil P; Joynes, Viktoria C T; Pickering, James D

2018-05-06

Anatomy education is at the forefront of integrating innovative technologies into its curricula. However, despite this rise in technology numerous authors have commented on the shortfall in efficacy studies to assess the impact such technology-enhanced learning (TEL) resources have on learning. To assess the range of evaluation approaches to TEL across anatomy education, a systematic review was conducted using MEDLINE, the Educational Resources Information Centre (ERIC), Scopus, and Google Scholar, with a total of 3,345 articles retrieved. Following the PRISMA method for reporting items, 153 articles were identified and reviewed against a published framework-the technology-enhanced learning evaluation model (TELEM). The model allowed published reports to be categorized according to evaluations at the level of (1) learner satisfaction, (2) learning gain, (3) learner impact, and (4) institutional impact. The results of this systematic review reveal that most evaluation studies into TEL within anatomy curricula were based on learner satisfaction, followed by module or course learning outcomes. Randomized controlled studies assessing learning gain with a specific TEL resource were in a minority, with no studies reporting a comprehensive assessment on the overall impact of introducing a specific TEL resource (e.g., return on investment). This systematic review has provided clear evidence that anatomy education is engaged in evaluating the impact of TEL resources on student education, although it remains at a level that fails to provide comprehensive causative evidence. Anat Sci Educ 11: 303-319. © 2017 American Association of Anatomists. © 2017 American Association of Anatomists.

Cellular communications a comprehensive and practical guide

CERN Document Server

Tripathi, Nishith

2014-01-01

Even as newer cellular technologies and standards emerge, many of the fundamental principles and the components of the cellular network remain the same. Presenting a simple yet comprehensive view of cellular communications technologies, Cellular Communications provides an end-to-end perspective of cellular operations, ranging from physical layer details to call set-up and from the radio network to the core network. This self-contained source forpractitioners and students represents a comprehensive survey of the fundamentals of cellular communications and the landscape of commercially deployed

Intellectual property in consumer electronics, software and technology startups

CERN Document Server

Halt, Jr , Gerald B; Stiles, Amber R; Fesnak, Robert

2014-01-01

This book provides a comprehensive guide to procuring, utilizing and monetizing intellectual property rights, tailored for readers in the high-tech consumer electronics and software industries, as well as technology startups.  Numerous, real examples, case studies and scenarios are incorporated throughout the book to illustrate the topics discussed.  Readers will learn what to consider throughout the various creative phases of a product’s lifespan from initial research and development initiatives through post-production.  Readers will gain an understanding of the intellectual property protections afforded to U.S. corporations, methods to pro-actively reduce potential problems, and guidelines for future considerations to reduce legal spending, prevent IP theft, and allow for greater profitability from corporate innovation and inventiveness. • Offers a comprehensive guide to intellectual property for readers in high-tech consumer electronics, software and technology startups; • Uses real case studies...

The Role of Relevance in Future Teachers' Utility Value and Interest toward Technology

Science.gov (United States)

Kale, Ugur; Akcaoglu, Mete

2018-01-01

Seeing the relevance of tasks for future use is important for developing value and interest in them. We employed a pre- and post-test quasi-experimental design using a mixed-methods approach to examine if reflecting on the relevance of technology to future teaching practices influences elementary and secondary preservice teachers' utility value…

Utilization of Information and Communication Technology (ICT) Resources and Job Effectiveness among Library Staff in the University of Calabar and Cross River University of Technology, Nigeria

Science.gov (United States)

Ntui, Aniebiet Inyang; Inyang, Comfort Linus

2015-01-01

This study investigated utilization of Information and Communication Technology (ICT) resources and job effectiveness among library staff in the University of Calabar and Cross River University of Technology, Nigeria. To achieve the purpose of this study, four hypotheses were formulated to guide the study. Ex-post facto research design was adopted…

FY 1999 report on the results of the project on the industrial science technology R and D. R and D of complex carbonhydrate production/utilization technology (Development of CO2 fixation/effective utilization technology by applying complex carbonhydrate); 1999 nendo sangyo kagaku gijutsu kenkyu kaihatsu jigyo. Fukugo toushitsu seisan riyo gijutsu no kenkyu kaihatsu (Fukugo toushitsu oyo nisankatanso koteika yuko riyo gijutsu kaihatsu) seika hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

For the purpose of making an industrial use of complex carbonhydrate performing an important function in substance recognition, etc., which cannot be realized by only nucleic acid, protein and lipid, the R and D of the basic technology related to the production/utilization were conducted, and the FY 1999 results were reported. In the study of synthesis/utilization/remodeling technology of complex carbonhydrate using the chemical synthesis method, the R and D were made not only on the synthesis of sugar chain but for the synthesis method of the peptide added with sugar chain, that is, glycopeptide. Further, as to the reaction with the aim of the application, there was hope for large-quantity synthesis of milk oligosaccharide by the oxygen method. In the study of the design technology of complex carbonhydrate molecules, the systematical analysis using the model glycopeptide was conducted of effects of the sugar chain addition part and sugar chain structure on the 3D structure and physiological activity. Concerning the synthesis/utilization/remodeling technology of complex carbonhydrate using the biological method, study was made of the animal cell utilization, microorganism utilization, technology of structural analysis of complex carbonhydrate, etc. (NEDO)

Report on the results of research and development under a consignment from NEDO of glycoconjugate production utilizing technologies. Development of technologies to fix and effectively utilize carbon dioxide by applying glycoconjugates; 1997 nendo sangyo kagaku gijutsu kenkyu kaihatsu jigyo Shin energy Sangyo Gijutsu Sogo Kaihatsu Kiko itaku. Fukugo toshitsu seisan riyo gijutsu no kenkyu kaihatsu (fukugo toshitsu oyo nisanka tanso koteika yuko riyo gijutsu kaihatsu) seika hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-03-01

This paper reports research results in fiscal 1997 for the `research and development of glycoconjugate production utilizing technologies`. In synthesizing, utilizing and remodeling technologies for glycoconjugates by means of chemical synthesis, studies were performed on developing methods to synthesize Gal {beta}1-3Gal NA(c {alpha})1-0-Serine in preparative scale, synthesizing high mannose type sugars of natural type without protection groups, and linking GlcNA or GalNAc onto partial peptide of fibroblast growth factor (FGF). In synthesizing, utilizing and remodeling technologies for glycoconjugates by using biological methods, studies were carried out, with regard to glycoconjugate synthesizing, utilizing and remodeling technologies utilizing animal cells, on identifying sugar structures of IFN-{gamma} produced from CHO cell line, and isolating CHO cell lines introduced with genes of sugar transferred enzyme GnTIV and/or GnTV. Furthermore, studies were conducted on glycoconjugate synthesizing, utilizing and remodeling technologies utilizing microorganisms, and glycoconjugate structure analyzing technologies. In addition, overall investigation was made on glycoconjugate production utilizing technologies. 113 refs., 76 figs., 18 tabs.

Utilization of bio-resources through nuclear technology

International Nuclear Information System (INIS)

Tamikazu Kume

2002-01-01

Nuclear technology such as gamma-ray, eb and ion beams is widely use for the utilization of bio-resources. Irradiation using gamma ray from 60 Co and electron beam is commercially used for the sterilization and modification of materials. Polysaccharides such as chitosan, sodium alginate, carrageenan, cellulose, pectin were easily degraded by irradiation and induced various kinds of biological activities, i.e. anti-bacterial activity, elicitor activity, plant growth promotion, suppression of environmental stress on plants. Some carbohydrate derivatives, carboxymethylcellulose (CMC), carboxymethyl-starch and carboxymethyl-chitin/chitosan, can be crosslinked under certain radiation condition and produced the biodegradable hydrogel for medical and agricultural uses. Ion beams have also been applied for mutation breeding for medical and agricultural use. Ion beams have also been applied for mutation breeding and the production of positron-emitting isotopes such as 11 C, 13 N, etc. It was succeeded to induce several kinds of flower-color and flower-form mutants in chrysanthemum and carnation by ion beams that have never produced by gamma-ray. The positron emitting tracer imaging system (PETIS) has been developed to obtain a dynamic image of plant transport in situ. (Author)

Cross-gender Comparison of Metacognitive Strategies Utilized by Omani Students in Reading Comprehension Classes

Directory of Open Access Journals (Sweden)

Manizheh Alami

2016-07-01

Full Text Available Given the fact that English is the language of the latest technological and scientific developments, comprehending English texts has priority for students to gain the knowledge and skills they will need in the future. However, most Omani students are not efficient L2 readers and do not have sufficient competence in reading authentic English texts. There is a variety of factors that might affect Omani students’ ability to read and comprehend English texts effectively. To find out what factors are involved in Omani students’ reading comprehension, in the first place, it is necessary to know what strategies they employ in reading. To this end, the current study attempts  to explore Omani students reported use of reading strategies using ‘Metacognitive Awareness of Reading Strategies Inventory’ (MARSI developed by Mokhtari and Reichard (2002. The self-reported survey completed by 200 students (90 female and110 male who enrolled for Advanced Foundation program (level 4 at Salalah College of Technology (SCT. The results show that SCT students’ awareness of metacognitive strategies is at medium level (3.46. Furthermore, the comparison between two gender groups (Males Vs. Females shows that male students use metacognitive reading strategies moderately (3.28 while female students use them more frequently (3.64. The outcomes of the study contribute to the improvement of SCT students reading ability and can be used by teachers to teach students different strategies to build meaning of the reading material which is among the goals of any educational system.

FY1995 research report on the survey of cryogenic energy utilization systems for environmentally friendly energy community project. Case studies of LNG cryogenic energy cascade-wise utilization; 1995 nendo kankyo chowagata energycommunity jigyo ni kakawaru reinetsu riyo system kento chosa hokokusho. LNG reinetsu no cascade teki riyo case study

Energy Technology Data Exchange (ETDEWEB)

NONE

1996-03-01

Japan's import of LNG (liquefied natural gas) has increased in these 15 years from 13-million tons to 43-million tons at a high rate of 2-million tons a year. At present LNG is used only in power generation and town gas business, and its cryogenic feature which may be useful in various fields is not being utilized. In this survey, factors impeding the wider application of the cryogenic energy are investigated, methods for using the energy more widely and mechanisms required therefor are studied, and discussion is made about the feasibility of the utilization of the energy in a cascade-wise form under the environmentally friendly energy community project. Researches are conducted and the results are evaluated in a study carried out on the comprehensive utilization of LNG cryogenic energy. These researches involve the actualities and trends of LNG cryogenic energy utilization in Japan; current status and prospect of the involvement of LNG bases with their neighboring industries and communities; technological measures for cryogenic energy utilization; technological measures related to low-temperature media and cold heat transportation systems; technological measures for the cascade-wise multidirectional utilization of cryogenic energy; and case studies on assumed local models. (NEDO)

Estimating CO2 Emission Reduction of Non-capture CO2 Utilization (NCCU) Technology

International Nuclear Information System (INIS)

Lee, Ji Hyun; Lee, Dong Woog; Gyu, Jang Se; Kwak, No-Sang; Lee, In Young; Jang, Kyung Ryoung; Shim, Jae-Goo; Choi, Jong Shin

2015-01-01

Estimating potential of CO 2 emission reduction of non-capture CO 2 utilization (NCCU) technology was evaluated. NCCU is sodium bicarbonate production technology through the carbonation reaction of CO 2 contained in the flue gas. For the estimating the CO 2 emission reduction, process simulation using process simulator (PRO/II) based on a chemical plant which could handle CO 2 of 100 tons per day was performed, Also for the estimation of the indirect CO 2 reduction, the solvay process which is a conventional technology for the production of sodium carbonate/sodium bicarbonate, was studied. The results of the analysis showed that in case of the solvay process, overall CO 2 emission was estimated as 48,862 ton per year based on the energy consumption for the production of NaHCO 3 (7.4 GJ/tNaHCO 3 ). While for the NCCU technology, the direct CO 2 reduction through the CO 2 carbonation was estimated as 36,500 ton per year and the indirect CO 2 reduction through the lower energy consumption was 46,885 ton per year which lead to 83,385 ton per year in total. From these results, it could be concluded that sodium bicarbonate production technology through the carbonation reaction of CO 2 contained in the flue was energy efficient and could be one of the promising technology for the low CO 2 emission technology.

A comprehensive review of electrocoagulation for water treatment: Potentials and challenges.

Science.gov (United States)

Moussa, Dina T; El-Naas, Muftah H; Nasser, Mustafa; Al-Marri, Mohammed J

2017-01-15

Electrocoagulation is an effective electrochemical approach for the treatment of different types of contaminated water and has received considerable attention in recent years due its high efficiency in dealing with numerous stubborn pollutants. It has been successful in dealing with organic and inorganic contaminants with negligible or almost no generation of by-product wastes. During the past decade, vast amount of research has been devoted to utilizing electrocoagulation for the treatment of several types of wastewater, ranging from polluted groundwater to highly contaminated refinery wastewater. This paper offers a comprehensive review of recent literature that has been dedicated to utilizing electrocoagulation for water treatment, focusing on current successes on specific applications in water and wastewater treatment, as well as potentials for future applications. The paper examines such aspects as theory, potential applications, current challenges, recent developments as well as economical concerns associated with the technology. Most of the recent EC research has been focusing on pollutant-specific evaluation without paying attention to cell design, process modeling or industrial applications. This review attempts to highlight the main achievements in the area and outlines the major shortcomings with recommendations for promising research options that can enhance the technology and broaden its range of applications. Copyright © 2016 Elsevier Ltd. All rights reserved.

Photovoltaic technology for sustainability: An investigation of the distributed utility concept as a policy framework

Science.gov (United States)

Letendre, Steven Emery

The U.S. electric utility sector in its current configuration is unsustainable. The majority of electricity in the United States is produced using finite fossil fuels. In addition, significant potential exists to improve the nation's efficient use of energy. A sustainable electric utility sector will be characterized by increased use of renewable energy sources and high levels of end-use efficiency. This dissertation analyzes two alternative policy approaches designed to move the U.S. electric utility sector toward sustainability. One approach is labeled incremental which involves maintaining the centralized structure of the electric utility sector but facilitating the introduction of renewable energy and efficiency into the electrical system through the pricing mechanism. A second policy approach was described in which structural changes are encouraged based on the emerging distributed utility (DU) concept. A structural policy orientation attempts to capture the unique localized benefits that distributed renewable resources and energy efficiency offer to electric utility companies and their customers. A market penetration analysis of PV in centralized energy supply and distributed peak-shaving applications is conducted for a case-study electric utility company. Sensitivity analysis was performed based on incremental and structural policy orientations. The analysis provides compelling evidence which suggests that policies designed to bring about structural change in the electric utility sector are needed to move the industry toward sustainability. Specifically, the analysis demonstrates that PV technology, a key renewable energy option likely to play an important role in a renewable energy future, will begin to penetrate the electrical system in distributed peak-shaving applications long before the technology is introduced as a centralized energy supply option. Most policies to date, which I term incremental, attempt to encourage energy efficiency and renewables

Achievement report on research and development in the Sunshine Project in fiscal 1976. Comprehensive discussion on hydrogen utilizing subsystems and research on peripheral technologies (Research related to hydrogen gas turbines); 1976 nendo suiso riyo subsystem no sogoteki kento to shuhen gijutsu ni kansuru kenkyu. Suiso gas turbine ni kansuru kenkyu

Energy Technology Data Exchange (ETDEWEB)

NONE

1977-03-01

This paper describes development of hydrogen gas turbines from among the comprehensive discussions on hydrogen utilizing subsystems. Hydrogen and oxygen gas turbine cycle has varying optimal conditions of plant efficiency depending on fuel patterns. The regenerative cycle may have the turbine inlet temperature at about 1,000 degrees C. The inlet pressure would be ten and odds atmospheric pressure. It is better to keep the inlet temperature higher in order to obtain high specific power. Reduction of power generation cost in using this plant requires that construction cost be decreased, and the specific power be increased if the plant efficiency (in other words, running cost) is assumed constant. Further development is required on technologies to use higher temperatures and pressures. For that purpose, discussions should be given on material development, structural design, and inspection. Hydrogen gas turbines, which present low pollution depending on combustion methods, have great significance for such social problem as environmental contamination. In terms of economy, since hydrogen gas turbines depend on efficiency and fuel unit cost, the evaluation thereon may vary depending on how well the regenerative gas turbines have been established, in addition to future change in hydrogen price and the technologies to use higher temperatures and pressures. (NEDO)

Advancing Partner Notification Through Electronic Communication Technology: A Review of Acceptability and Utilization Research.

Science.gov (United States)

Pellowski, Jennifer; Mathews, Catherine; Kalichman, Moira O; Dewing, Sarah; Lurie, Mark N; Kalichman, Seth C

2016-06-01

A cornerstone of sexually transmitted infection (STI) prevention is the identification, tracing, and notification of sex partners of index patients. Although partner notification reduces disease burden and prevents new infections as well as reinfections, studies show that only a limited number of partners are ever notified. Electronic communication technologies, namely, the Internet, text messaging, and phone calls (i.e., e-notification), have the potential to expand partner services. We conducted a systematic review of studies that have investigated the acceptability and utility of e-notification. We identified 23 studies that met the following criteria: (a) 9 studies presented data on the acceptability of technology-based communications for contacting sex partner(s), and (b) 14 studies reported on the utilization of communication technologies for partner notification. Studies found high levels of interest in and acceptability of e-notification; however, there was little evidence for actual use of e-notification. Taken together, results suggest that electronic communications could have their greatest impact in notifying less committed partners who would otherwise be uninformed of their STI exposure. In addition, all studies to date have been conducted in resource-rich countries, although the low cost of e-notification may have its greatest impact in resource-constrained settings. Research is needed to determine the best practices for exploiting the opportunities afforded by electronic communications for expanding STI partner services.

An Investigation of Factors Affecting Utilization of Information Technology (IT by Agricultural Students

Directory of Open Access Journals (Sweden)

Masoud Rezaei

2012-03-01

Full Text Available The present study was carried out with the aim of investigating factors affecting utilization of information technology by students of agriculture. A survey approach was used in this study and a questionnaire was developed to gather the data. The study population was postgraduate students (MS and PhD of economic and agricultural development faculty in Tehran University who were selected by applying random sampling technique. Sample size for students was 61 persons. Data was analyzed by using SPSS/WIN software. The results of the research indicated that there was a positive significant relationship between using of information technology by students and their age, average, prior experience, information technology skills, innovativeness, perceived ease of use, attitude and self-efficacy. The relationship between computer anxiety and using of IT was negative. Stepwise Regression Analysis showed that innovativeness and attitude predict 53.2 percent of variations of IT use by students.

Measuring the Comprehensibility of Englishes within ASEAN among Aseans

Science.gov (United States)

Wilang, Jeffrey Dawala; Teo, Adisa

2012-01-01

This paper focuses on designing a comprehensibility test and a questionnaire for spoken world Englishes in Brunei, Malaysia, the Philippines and Singapore, and utilizing the test to investigate the comprehension of Burmese, Cambodians, Indonesians, Laotians, Thais and Vietnamese. We reviewed the demarcation of users of English based on Kachru's…

44 CFR 12.14 - Annual comprehensive review.

Science.gov (United States)

2010-10-01

... should be abolished. (b) Pertinent factors to be considered in the comprehensive review required by... programs or operations; (4) An evaluation of the utilization by the Agency of the committee's policy...

FY 1999 report on the results of the project on the industrial science technology R and D. Development of utilization technology of biological resources such as bioconsortium system (Development of the bioconsortium system utilization/production technology); 1999 nendo sangyo gijutsu kenkyu kaihatsu jigyo. Fukugou seibutsukei tou seibutsu shigen riyo gijutsu kaihatsu (Fukugou seibutsukei riyo seisan gijutsu no kaihatsu) seika hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

For the purpose of developing the functional substance production technology, petroleum degrading/cleaning technology and high-grade utilization technology of the unused petroleum fraction, study was conducted of the culture control technology in substance production and substance decomposition by bioconsortia, and the FY 1999 results were reported. As to the functional material production technology, study was made of the separation/culture technology, functional substance production technology using bioconsortia (control substance searching method in the ocean microbial consortia system, isolation of control substance/structure determination/separation of production bacteria, elucidation of the inter-species communication substance function, heightening of function of the production microbial consortia), etc. Concerning the effective degrading/cleaning technology of petroleum compounds, study was made of the molecular genetic analysis technology, histochemical analysis technology, analysis technology of the solvent resistance mechanism, bioconsortia analysis system technology, global environmental purification technology such as the effective decomposition of environmental pollutants, etc. Relating to the high-grade utilization technology of the unused petroleum fraction, study was made of the chemical analysis of the photolysis crude oil, selection of the decomposition microbial consortia, etc. (NEDO)

Monitoring based maintenance utilizing actual stress sensory technology

Science.gov (United States)

Sumitro, Sunaryo; Kurokawa, Shoji; Shimano, Keiji; Wang, Ming L.

2005-06-01

In recent years, many infrastructures have been deteriorating. In order to maintain sustainability of those infrastructures which have significant influence on social lifelines, economical and rational maintenance management should be carried out to evaluate the life cycle cost (LCC). The development of structural health monitoring systems, such as deriving evaluation techniques for the field structural condition of existing structures and identification techniques for the significant engineering properties of new structures, can be considered as the first step in resolving the above problem. New innovative evaluation methods need to be devised to identify the deterioration of infrastructures, e.g. steel tendons, cables in cable-stayed bridges and strands embedded in pre- or post-tensioned concrete structures. One of the possible solutions that show 'AtoE' characteristics, i.e., (a)ccuracy, (b)enefit, (c)ompendiousness, (d)urability and (e)ase of operation, elasto-magnetic (EM) actual stress sensory technology utilizing the sensitivity of incremental magnetic permeability to stress change, has been developed. Numerous verification tests on various steel materials have been conducted. By comparing with load cell, strain gage and other sensory technology measurement results, the actual stresses of steel tendons in a pre-stressed concrete structure at the following stages have been thoroughly investigated: (i) pre-stress change due to set-loss (anchorage slippage) at the tendon fixation stage; (ii) pre-stress change due to the tendon relaxation stage; (iii) concrete creep and shrinkage at the long term pre-stressing stage; (iv) pre-stress change in the cyclic fatigue loading stage; and (v) pre-stress change due to the re-pre-stress setting stage. As the result of this testing, it is confirmed that EM sensory technology enables one to measure actual stress in steel wire, strands and steel bars precisely without destroying the polyethylene covering sheath and enables

Technology utilization and American competitiveness

Science.gov (United States)

Penaranda, Frank; Arnold, Ray; Fetterolf, Fred

1992-01-01

This session of discussions reports on two sides of the technology transfer issue. The speakers are representatives of the aluminum industry (Alcoa Aluminum) and the National Aeronautics and Space Administration, Office of Commercial Programs. They discuss what technology transfer means, what NASA does for industry, and how information is disseminated.

Comprehensive report to Congress Clean Coal Technology Program. Four Rivers Energy Modernization Project

Energy Technology Data Exchange (ETDEWEB)

1994-06-01

One of the five projects selected for funding within the Clean Coal Technology Program is a project proposed by Air Products and Chemicals, Inc. (APCI) of Allentown, Pennsylvania. APCI requested financial assistance from DOE for the design, construction, and operation of a 95 megawatt-electric (MWe) gross equivalent, second generation, pressurized, circulating fluidized bed (PCFB) combustor cogeneration facility. The project, named the Four Rivers Energy Modernization Project, is co be located adjacent to an existing APCI chemicals manufacturing facility in Calvert City, Kentucky. Four Rivers Energy Partners, L.P. (FREP), will execute the project. The demonstration plant will produce approximately 70 MWe for the utility grid and an average of 310,000 pounds per hour of process steam for the chemicals manufacturing facility. The project, including the demonstration phase, will last 80 months at a total cost of $360,707,500. DOE`s share of the project cost will be 39.5 percent, or $142,460,000. The objective of the proposed project is to demonstrate a second generation PCFB system based on technology being supplied by Foster Wheeler Energy Corporation (FWEC), Westinghouse Electric Corporation (Westinghouse), and LLB Lurgi Lentjes Babcock Energietechnik GmbH (LLB). The integrated performance to be demonstrated will involve all of the process systems, including coal preparation and feed, sorbent feed, carbonizer, char transfer, PCFB combustor, carbonizer and combustor hot-gas filtration, carbonizer and combustor alkali removal, topping combustor, gas turbine-generator, heat recovery steam generator (HRSG), steam turbine-generator, and balance-of-plant systems. The project will utilize Western Kentucky and Southern Illinois bituminous coal.

Natural language processing in psychiatry. Artificial intelligence technology and psychopathology.

Science.gov (United States)

Garfield, D A; Rapp, C; Evens, M

1992-04-01

The potential benefit of artificial intelligence (AI) technology as a tool of psychiatry has not been well defined. In this essay, the technology of natural language processing and its position with regard to the two main schools of AI is clearly outlined. Past experiments utilizing AI techniques in understanding psychopathology are reviewed. Natural language processing can automate the analysis of transcripts and can be used in modeling theories of language comprehension. In these ways, it can serve as a tool in testing psychological theories of psychopathology and can be used as an effective tool in empirical research on verbal behavior in psychopathology.

Research on the Prediction Model of CPU Utilization Based on ARIMA-BP Neural Network

Directory of Open Access Journals (Sweden)

Wang Jina

2016-01-01

Full Text Available The dynamic deployment technology of the virtual machine is one of the current cloud computing research focuses. The traditional methods mainly work after the degradation of the service performance that usually lag. To solve the problem a new prediction model based on the CPU utilization is constructed in this paper. A reference offered by the new prediction model of the CPU utilization is provided to the VM dynamic deployment process which will speed to finish the deployment process before the degradation of the service performance. By this method it not only ensure the quality of services but also improve the server performance and resource utilization. The new prediction method of the CPU utilization based on the ARIMA-BP neural network mainly include four parts: preprocess the collected data, build the predictive model of ARIMA-BP neural network, modify the nonlinear residuals of the time series by the BP prediction algorithm and obtain the prediction results by analyzing the above data comprehensively.

Carbon footprint of forest and tree utilization technologies in life cycle approach

Science.gov (United States)

Polgár, András; Pécsinger, Judit

2017-04-01

In our research project a suitable method has been developed related the technological aspect of the environmental assessment of land use changes caused by climate change. We have prepared an eco-balance (environmental inventory) to the environmental effects classification in life-cycle approach in connection with the typical agricultural / forest and tree utilization technologies. The use of balances and environmental classification makes possible to compare land-use technologies and their environmental effects per common functional unit. In order to test our environmental analysis model, we carried out surveys in sample of forest stands. We set up an eco-balance of the working systems of intermediate cutting and final harvest in the stands of beech, oak, spruce, acacia, poplar and short rotation energy plantations (willow, poplar). We set up the life-cycle plan of the surveyed working systems by using the GaBi 6.0 Professional software and carried out midpoint and endpoint impact assessment. Out of the results, we applied the values of CML 2001 - Global Warming Potential (GWP 100 years) [kg CO2-Equiv.] and Eco-Indicator 99 - Human health, Climate Change [DALY]. On the basis of the values we set up a ranking of technology. By this, we received the environmental impact classification of the technologies based on carbon footprint. The working systems had the greatest impact on global warming (GWP 100 years) throughout their whole life cycle. This is explained by the amount of carbon dioxide releasing to the atmosphere resulting from the fuel of the technologies. Abiotic depletion (ADP foss) and marine aquatic ecotoxicity (MAETP) emerged also as significant impact categories. These impact categories can be explained by the share of input of fuel and lube. On the basis of the most significant environmental impact category (carbon footprint), we perform the relative life cycle contribution and ranking of each technologies. The technological life cycle stages examined

Reactor and process design in sustainable energy technology

CERN Document Server

Shi, Fan

2014-01-01

Reactor Process Design in Sustainable Energy Technology compiles and explains current developments in reactor and process design in sustainable energy technologies, including optimization and scale-up methodologies and numerical methods. Sustainable energy technologies that require more efficient means of converting and utilizing energy can help provide for burgeoning global energy demand while reducing anthropogenic carbon dioxide emissions associated with energy production. The book, contributed by an international team of academic and industry experts in the field, brings numerous reactor design cases to readers based on their valuable experience from lab R&D scale to industry levels. It is the first to emphasize reactor engineering in sustainable energy technology discussing design. It provides comprehensive tools and information to help engineers and energy professionals learn, design, and specify chemical reactors and processes confidently. Emphasis on reactor engineering in sustainable energy techn...

Development of other oil-alternative energy technologies

Energy Technology Data Exchange (ETDEWEB)

NONE

1995-09-01

Development efforts are being given on a large wind power generation system which has high reliability and economy and suits the actual situations in Japan. Verification tests will be conducted to establish control systems to realize load leveling against the increase in maximum power demand and the differences in demands between seasons, days and nights. Development will also be made on technologies for systems to operate devices optimally using nighttime power for household use. Solar light and heat energies will be introduced and used widely in housing to achieve efficient comprehensive energy utilization. Wastes, waste heat and unused energies locally available will be utilized to promote forming environment harmonious type energy communities. Photovoltaic and fuel cell power generation facilities will be installed on a trial basis to promote building a groundwork for full-scale installations. Photovoltaic power generation systems will be installed on actual houses to establish technologies to assess and optimize the load leveling effect. Attempts will be made on practical application of high-efficiency regional heat supply systems which utilize such unutilized energies as those from sea water and river water. Assistance will be given through preparing manuals on introduction of wastes power generation systems by local governments, and introduction of regional energy systems by using new discrete type power generation technologies and consumer-use cogeneration systems. 1 fig., 1 tab.

Conceptual approaches to innovative energy saving technologies and reducing greenhouse effect

Energy Technology Data Exchange (ETDEWEB)

Buyadgie, Dmytro; Sechenyh, Vitaliy; Buyadgie, Olexiy; Nichenko, Sergii; Vasil' ev, Igor

2010-09-15

The study attempts a comprehensive overview of the effects of human activities and proposes technical solutions for compensation of human anthropogenic intervention. Attention is focused on energy consumption optimization and reduction of harmful emissions at current stage of civilization development. Natural sources of energy and their associated greenhouse gases (GHG) emissions are considered in the paper along with the existed approaches to energy utilization, its merits and demerits. The role of heat-utilizing thermotransformers in reduction of thermal release and GHG emissions is specified. The examples of energy efficient technologies, based on application of jet devices, are presented in the study.

Utilizing Technology Effectively to Improve Millennials' Educational Performance: An Exploratory Look at Business Students' Perceptions

Science.gov (United States)

Aviles, Maria; Eastman, Jacqueline K.

2012-01-01

Purpose: The purpose of this paper is to discuss how technological tools, such as Web 2.0 and online learning management systems, can be utilized to improve Millennials' educational performance. Design/methodology/approach: An exploratory survey of Millennial business students was conducted to measure their self-reported use and perceived…

An analysis of the Spanish electrical utility industry. Economies of scale, technological progress and efficiency

International Nuclear Information System (INIS)

Arcos, Angel; De Toledo, Pablo Alvarez

2009-01-01

In this paper we propose a model to explain the behaviour of the Spanish electrical utility industry during the period 1987-1997, under the then existing regulatory system (Marco Legal Estable). The paper will study the presence of economies of scale, the effect of technological progress and the differences in the efficiency of the different companies within the market. The paper concludes that the Spanish electrical utility industry was not, in fact, characterized by economies of scale during this period, but witnessed a great improvement in efficiency within that period. All the critical market factors remind stable. (author)

The increase of the efficiency for comprehensive utilization of the fuel and energetic resources (The use coal enterprises of Kazakhstan as example)

International Nuclear Information System (INIS)

Satova, R.K.

1999-01-01

In Kazakhstan during the period of transition to the market economy in the condition of reduction of coal production and increasing expenditures in coal branch, the problem of of the rational utilization of coal resources becomes the most vital issue. In the thesis theoretical and methodological aspects of socio-economic efficiency of utilization of the fuel and energetic resources are investigated. Different fields of usage of coal and coal wastes are studied, economic evaluation of mechanic and thermo-chemical methods of producing coal in process of bringing resources saving technologies; the national efficiency of using products in the quantity of technological raw and energetic fuel is brought out; the influence refining for the widening of the raw-base of industry, promoting the economic results of production and the lowering environmental pollution. It was estimated that the extracted coal of the region includes 1020 thousand tonne of aluminium oxide and 996 thousand tonne of sulphur; in the course of extracting and coal processing 3650 thousand tonne of firm wastes appeared; during the extracting of Ehkibastuz coal - 90970 thousand tonne, and the Karaganda coal - 40040 thousand tonne.The coal components and wastes mentioned above should be considered not only as source of environment pollution but also as potential resource for the production of industrial goods according to their qualitative characteristics and the availability of technical ideas of the processing. The implementation of the mentioned pre-sup-positions in the conditions of the forming market economy will allow to use the organic part of coal more competently, to involve the other useful components of coal in the sphere of production consumption, to utilize gaseous and firm wastes and to gain of the basis the expansion of resource base of same branches of industry and the reduction of environment pollution. It will be also accompanied by the needs in capital investments for the industrial

Regulating technological change - The strategic reactions of utility companies towards subsidy policies in the German, Spanish and UK electricity markets

International Nuclear Information System (INIS)

Stenzel, Till; Frenzel, Alexander

2008-01-01

This paper focuses on how incumbent electric utilities strategically react to subsidy schemes supporting renewable energy technologies in the UK, Germany, and Spain. Firms coordinate the development of their technological capabilities and their political activities to shape their regulatory environment. Analysing the diffusion of wind power in these countries, we show that the different ways, in which firms coordinate their technological and political strategies, lead to very different market outcomes, both for the firms' market share and the size of the overall market. Although incumbents are usually seen as being resistant to change in energy systems, we show that Spanish utilities proactively drive the diffusion of wind power. We speculate about the relation between the ownership structure of the energy system and its inertia with respect to the integration of new technologies. We derive novel policy implications that explicitly take into account the strategic actions of incumbent firms shaping the technological and regulatory system

Architecture academic by information technologies utilization ...

African Journals Online (AJOL)

This research aims at studying teaching modern architecture with information technology approach. Today, information technology is used to transmit knowledge in many universities of the world. Information technology tools are potentially capable of providing engineering students with a broad continuum of curriculum in ...

Resourceful utilization technology for natural gas

International Nuclear Information System (INIS)

Matsumura, Y.

1994-01-01

This paper is a description of new applications that will contribute in increasing the demand for natural gas. First, technical issues to turn natural gas into a more resourceful fuel (efficient transportation and storage, integrated utilization of energies, uses as non-fuel), and also pitch-based high performance carbon materials and utilization techniques in the field of energy (isotropic carbon fiber, activated carbon fiber, spherical carbon micro-beads, high modulus carbon fiber). (TEC)

ECO-TOURISM SUSTAINABILITY THROUGH PV TECHNOLOGY: A COMPREHENSIVE REVIEW

Directory of Open Access Journals (Sweden)

ARAVIND C. V

2013-12-01

Full Text Available Through the Economic Transformation program the Malaysian Government aims to consider tourism as one of the major contributors to the country’s economy and as an industry that imbibe on the principles of environmental responsibility and sustainable development. The growing challenges in the prevention of expansion in agriculture, forestry and aquaculture, and over-exploitation of the natural resources, have made ecotourism extremely popular as a solution for developing tourism sites. Ecotourism attracts many people who wish not only to explore natural wonders but also to protect them for future generations. Most of the ecotourism sites are presumably situated far from the conventional energy resources and thus transporting electricity to those areas are discussed as inefficient and unsustainable. However, solar Photo-voltaic (PV system is clean and alternative energy to suffice the energy demands of eco-tourist sites. This paper puts statements of the energy demand in global and its impact on the traditional fossil fuels and proposes PV as an alternative renewable technology pertaining to the eco-tourism application. The paper especially focuses on solar PV systems which not only could supply the energy demand of tourist sites but can also maintain the image of the ecotourism. A case of a model lodge is used for the study, through the energy demand analysis. A comprehensive review on the PV architecture is presented that derive interest in the implementation of such structure for the case presented.

Evaluation of Smart Grid Technologies Employed for System Reliability Improvement: Pacific Northwest Smart Grid Demonstration Experience

Energy Technology Data Exchange (ETDEWEB)

Agalgaonkar, Yashodhan P.; Hammerstrom, Donald J.

2017-06-01

The Pacific Northwest Smart Grid Demonstration (PNWSGD) was a smart grid technology performance evaluation project that included multiple U.S. states and cooperation from multiple electric utilities in the northwest region. One of the local objectives for the project was to achieve improved distribution system reliability. Toward this end, some PNWSGD utilities automated their distribution systems, including the application of fault detection, isolation, and restoration and advanced metering infrastructure. In light of this investment, a major challenge was to establish a correlation between implementation of these smart grid technologies and actual improvements of distribution system reliability. This paper proposes using Welch’s t-test to objectively determine and quantify whether distribution system reliability is improving over time. The proposed methodology is generic, and it can be implemented by any utility after calculation of the standard reliability indices. The effectiveness of the proposed hypothesis testing approach is demonstrated through comprehensive practical results. It is believed that wider adoption of the proposed approach can help utilities to evaluate a realistic long-term performance of smart grid technologies.

Advanced Manufacturing Technology Adoption In SMEs: An Integrative Model

Directory of Open Access Journals (Sweden)

Mirmahdi Darbanhosseiniamirkhiz

2012-12-01

Full Text Available The objective of this study is to assess the critical factors which influence adoption of  Advanced Manufacturing Technologies (AMTs and identify hurdles and barriers which prevent small- and medium-sized enterprises (SMEs from accomplishing the desired goals of AMTs utilization. The proposed framework has synthesized previous studies and integrated related studies through conducting a comprehensive literature review. This paper is a theoretical construction that synthesizes previous studies, and centers on three context (Environmental, Organizational, and Technological which influence  adoption of AMTs. This model can provide managers with practical solutions through granting in-depth understanding of whole internal, external, and technological environments, and awarding empirical insight into overcoming barriers to the adoption and implementation of AMT and other process innovations in manufacturing organizations.

Process and device integration for silicon tunnel FETs utilizing isoelectronic trap technology to enhance the ON current

Science.gov (United States)

Mori, Takahiro; Asai, Hidehiro; Fukuda, Koichi; Matsukawa, Takashi

2018-04-01

A tunnel FET (TFET) is a candidate replacement for conventional MOSFETs to realize low-power LSI. The most significant issue with the practical application of TFETs concerns their low tunneling current. Si is an indirect-gap material with a low band-to-band tunneling probability and is not favored for the channel. However, a new technology has recently been proposed to enhance the tunneling current in Si-TFETs by utilizing isoelectronic trap (IET) technology. IET technology provides an innovative approach to realizing low-power LSI with TFETs. In this paper, state-of-the-art research on Si-TFETs with IET technology from the viewpoint of process and device integration is reviewed.

Utility Computing: Reality and Beyond

Science.gov (United States)

Ivanov, Ivan I.

Utility Computing is not a new concept. It involves organizing and providing a wide range of computing-related services as public utilities. Much like water, gas, electricity and telecommunications, the concept of computing as public utility was announced in 1955. Utility Computing remained a concept for near 50 years. Now some models and forms of Utility Computing are emerging such as storage and server virtualization, grid computing, and automated provisioning. Recent trends in Utility Computing as a complex technology involve business procedures that could profoundly transform the nature of companies' IT services, organizational IT strategies and technology infrastructure, and business models. In the ultimate Utility Computing models, organizations will be able to acquire as much IT services as they need, whenever and wherever they need them. Based on networked businesses and new secure online applications, Utility Computing would facilitate "agility-integration" of IT resources and services within and between virtual companies. With the application of Utility Computing there could be concealment of the complexity of IT, reduction of operational expenses, and converting of IT costs to variable `on-demand' services. How far should technology, business and society go to adopt Utility Computing forms, modes and models?

6th Conference on Coal Utilization Technology; Dai 6 kai sekitan riyo gijutsu kaigi koenshu

Energy Technology Data Exchange (ETDEWEB)

NONE

1996-09-01

The paper compiled the papers presented in the 6th Conference on Coal Utilization Technology held in September 1996. With relation to the fluidized bed boiler, reported were Field operation test of Wakamatsu PFBC combined cycle power plant and Development of pressurized internally circulating fluidized bed combustion technology. Regarding the coal reformation, Development of advanced coal cleaning process, Coal preparation and coal cleaning in the dry process, etc. Concerning the combustion technology, Study of the O2/CO2 combustion technology, Development of pressurized coal partial combustor, etc. About the CWM, Development of low rank coals upgrading and their CWM producing technology, Technique of CWM distribution system, etc. Relating to the coal ash, Engineering characteristics of the improved soil by deep mixing method using coal ash, Employment of fluidized bed ash as a basecourse material, On-site verification trials using fly ash for reclamation behind bulkheads, Water permeabilities of pulverized fuel ash, Separation of unburned carbon from coal fly ash through froth flotation, Practical use technology of coal ash (POZ-O-TEC), etc

The secret to health information technology's success within the diabetes patient population: a comprehensive privacy and security framework.

Science.gov (United States)

Pandya, Sheel M

2010-05-01

Congress made an unprecedented investment in health information technology (IT) when it passed the American Recovery and Reinvestment Act in February 2009. Health IT provides enormous opportunities to improve health care quality, reduce costs, and engage patients in their own care. But the potential payoff for use of health IT for diabetes care is magnified given the prevalence, cost, and complexity of the disease. However, without proper privacy and security protections in place, diabetes patient data are at risk of misuse, and patient trust in the system is undermined. We need a comprehensive privacy and security framework that articulates clear parameters for access, use, and disclosure of diabetes patient data for all entities storing and exchanging electronic data. (c) 2010 Diabetes Technology Society.

Electric utility companies and geothermal power

Science.gov (United States)

Pivirotto, D. S.

1976-01-01

The requirements of the electric utility industry as the primary potential market for geothermal energy are analyzed, based on a series of structured interviews with utility companies and financial institution executives. The interviews were designed to determine what information and technologies would be required before utilities would make investment decisions in favor of geothermal energy, the time frame in which the information and technologies would have to be available, and the influence of the governmental politics. The paper describes the geothermal resources, electric utility industry, its structure, the forces influencing utility companies, and their relationship to geothermal energy. A strategy for federal stimulation of utility investment in geothermal energy is suggested. Possibilities are discussed for stimulating utility investment through financial incentives, amelioration of institutional barriers, and technological improvements.

Promoting International Cooperation and Public Acceptance in Utilizing Proton Accelerator Technology

International Nuclear Information System (INIS)

Choi, Byung Ho; Hahn, Bong Oh; Lee, Jae Hyung; Kim, Kyu Ryung; Joo, Po Kook; Kim, In Kyu; Kim, Hyun Joon; Noh, Seung Jeong

2002-11-01

Proton engineering's main tool will be a high power proton accelerator which is to be established within next 10 years in the frame of Proton engineering Frontier Project. It is necessary for public to understand the meaning and importance of the project so that Project activities such as site preparation can be efficiently completed. And, it is required to establish a sound plan of international cooperation, and to develop user program to establish domestic foundation in utilizing the accelerator. Along with public relations activities through newspapers and broadcasting, there were more than 20 times of project presentations requested by various local governments, universities, and scientific societies. which resulted in strong support of the project from various societies. Based on collected information through actual visits to and internet surveys on foreign accelerators, a recommendation of international cooperation scheme has been made to complement domestic technological weak points, and there were discussions with some foreign organizations for that purpose. Especially, KEK of Japan, IHEP of China and KAERI have been deliberating on planning detail cooperation programs in developing and utilizing accelerator among 3 countries Some research items related with NT/BT/IT and utilizing proton beam were planned to be implemented in the Project. And a user program implemented in the Project In order to be prepared for future use of the accelerator. In order to upbring junior researchers for future days, an accelerator summer school has been planned to be held annually inviting prominent foreign and domestic lecturers

The malaria parasite RhopH protein complex interacts with erythrocyte calmyrin identified from a comprehensive erythrocyte protein library.

Science.gov (United States)

Miura, Toyokazu; Takeo, Satoru; Ntege, Edward H; Otsuki, Hitoshi; Sawasaki, Tatsuya; Ishino, Tomoko; Takashima, Eizo; Tsuboi, Takafumi

2018-06-02

Malaria merozoite apical organelles; microneme and rhoptry secreted proteins play functional roles during and following invasion of host erythrocytes. Among numerous proteins, the rhoptries discharge high molecular weight proteins known as RhopH complex. Recent reports suggest that the RhopH complex is essential for growth and survival of the malaria parasite within erythrocytes. However, an in-depth understanding of the host-parasite molecular interactions is indispensable. Here we utilized a comprehensive mouse erythrocyte protein library consisting of 443 proteins produced by a wheat germ cell-free system, combined with AlphaScreen technology to identify mouse erythrocyte calmyrin as an interacting molecule of the rodent malaria parasite Plasmodium yoelii RhopH complex (PyRhopH). The PyRhopH interaction was dependent on the calmyrin N-terminus and divalent cation capacity. The finding unveils a recommendable and invaluable usefulness of our comprehensive mouse erythrocyte protein library together with the AlphaScreen technology in investigating a wide-range of host-parasite molecular interactions. Copyright © 2018 Elsevier Inc. All rights reserved.

Minimal support technology and in situ resource utilization for risk management of planetary spaceflight missions

Science.gov (United States)

Murphy, K. L.; Rygalov, V. Ye.; Johnson, S. B.

2009-04-01

All artificial systems and components in space degrade at higher rates than on Earth, depending in part on environmental conditions, design approach, assembly technologies, and the materials used. This degradation involves not only the hardware and software systems but the humans that interact with those systems. All technological functions and systems can be expressed through functional dependence: [Function]˜[ERU]∗[RUIS]∗[ISR]/[DR];where [ERU]efficiency (rate) of environmental resource utilization[RUIS]resource utilization infrastructure[ISR]in situ resources[DR]degradation rateThe limited resources of spaceflight and open space for autonomous missions require a high reliability (maximum possible, approaching 100%) for system functioning and operation, and must minimize the rate of any system degradation. To date, only a continuous human presence with a system in the spaceflight environment can absolutely mitigate those degradations. This mitigation is based on environmental amelioration for both the technology systems, as repair of data and spare parts, and the humans, as exercise and psychological support. Such maintenance now requires huge infrastructures, including research and development complexes and management agencies, which currently cannot move beyond the Earth. When considering what is required to move manned spaceflight from near Earth stations to remote locations such as Mars, what are the minimal technologies and infrastructures necessary for autonomous restoration of a degrading system in space? In all of the known system factors of a mission to Mars that reduce the mass load, increase the reliability, and reduce the mission’s overall risk, the current common denominator is the use of undeveloped or untested technologies. None of the technologies required to significantly reduce the risk for critical systems are currently available at acceptable readiness levels. Long term interplanetary missions require that space programs produce a craft

Pilot research project of risk communication on nuclear technology and its utilization. Toward communication and collaboration with community

International Nuclear Information System (INIS)

Tsuchiya, Tomoko

2003-01-01

Although the importance of risk communication has been pointed out over the last decade in nuclear community, both public authorities and nuclear industry have not conducted the definite actions yet. It will be reflected in the public eye that nuclear community's attitude toward communication and consultation with the public about risk issues is half-hearted, comparing with chemical and food safety fields which recently launched their risk communication activities. In this study, we conduct risk communication experiments on some risk issues associated with nuclear technology and its utilization in Tokai village, for the purpose of establishment of risk communication in our society that might be one of the new relationships between science and technology and society. The outcomes of FY2002 study are the following threefold; 1) preparation of risk communication experiments on nuclear technology and its utilization, 2) assessment of social effects of risk communication activities, 3) preparation of practical guidebook for risk communication experiments. (J.P.N.)

Present status of research on radiation utilization in 1994 at JAERI. Utilization of irradiation and RI production and utilization

International Nuclear Information System (INIS)

1994-10-01

In Japan Atomic Energy Research Institute, Takasaki Radiation Chemistry Research Establishment is in charge of the utilization of irradiation, and Tokai Research Establishment is in charge of the production and utilization of radioisotopes. As for the utilization of irradiation the development of new polymers, the development of environment preservation technology such as flue gas treatment, and by using various ion beams from four accelerators, the development of the materials used for space environment, nuclear fusion and new functional materials, the research on the radiation application to biotechnology, the development of the production and utilization of new radioisotopes have been carried out. As for the production and utilization of radioisotopes, the development of new products and new utilization techniques, the technology of producing and using a large amount of tritium, and the research on the chemical behavior of tritium have been carried out. The international cooperations have been promoted positively. In this report, the research activities in 1994 are described. (K.I.)

Privatization of municipal electrical utilities

International Nuclear Information System (INIS)

Carr, J.

1998-01-01

The challenges and special issues which arise through the sale of a municipal electric utility were discussed. The recent sales of two utilities, the Kentville Electric Commission in Nova Scotia and Cornwall Electric in Ontario, were used as examples to show how the sale of an electric utility differs from the sale of most business enterprises. Municipal utilities are integral parts of the communities they serve which introduces several complexities into the sale. Factors that require special attention in the sale of the utilities, including electricity rates, local accountability, treatment of employees and local economic development, and the need for a comprehensive communication program to deal with the substantial public interest that sale of a municipal utility will engender, were reviewed

Field test plan: Buried waste technologies, Fiscal Year 1995

International Nuclear Information System (INIS)

Heard, R.E.; Hyde, R.A.; Engleman, V.S.; Evans, J.D.; Jackson, T.W.

1995-06-01

The US Department of Energy, Office of Technology Development, supports the applied research, development, demonstration, testing, and evaluation of a suite of advanced technologies that, when integrated with commercially available baseline technologies, form a comprehensive remediation system for the effective and efficient remediation of buried waste. The Fiscal Year 1995 effort is to deploy and test multiple technologies from four functional areas of buried waste remediation: site characterization, waste characterization, retrieval, and treatment. This document is the basic operational planning document for the deployment and testing of the technologies that support the field testing in Fiscal Year 1995. Discussed in this document are the scope of the tests; purpose and objective of the tests; organization and responsibilities; contingency plans; sequence of activities; sampling and data collection; document control; analytical methods; data reduction, validation, and verification; quality assurance; equipment and instruments; facilities and utilities; health and safety; residuals management; and regulatory management

FY 1998 report on the results of the development of utilization technology of biological resources such as bioconsortia. Development of the bioconsortia system utilization/production technology; 1998 nendo fukugo seibutsukei nado seibutsu shigen riyo gijutsu kaihatsu seika hokokusho. Fukugo seibutsukei riyo seisan gijutsu no kaihatsu

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-03-01

For the purpose of developing the industrial utilization technology, analysis was made of functions and interactions of the specified functional biological groups, and at the same time the developmental study was made of the technology to isolate/culture the constitutive biological groups. The FY 1998 results were summed up. As to the technology to detect microorganisms in soil, the SFDA method was improved and the new dyeing method was developed. And, there almost was hope for the development. Concerning the functional analysis technology, the functional substances peculiarly manifested only in the complex system in the ocean environment are searched. Several kinds of compounds were found out, and at the same time the test to confirm the biological activity is under way. Relating to the isolation/culture technology, study was made on rotten fruit, and the existence in the sample of the microorganisms which are difficult in isolation/culture was newly confirmed. In regard to the culture of the microorganisms which are difficult in isolation/culture, availability of the replica method was found out. As to the technology to produce functional substances, studies were made on the following: utilization technology of the environmental harmony type oil/water separation polymer producing microbial consortia, method to artificially make gene exchanges in the microbial consortia, etc. (NEDO)

Heat Pump Water Heater Technology: Experiences of Residential Consumers and Utilities

Energy Technology Data Exchange (ETDEWEB)

Ashdown, BG

2004-08-04

benefits. Because it produces hot water by extracting heat from the air it tends to dehumidify and cool the room in which it is placed. Moreover, it tends to spread the water heating load across utility non-peak periods. Thus, electric utilities with peak load issues could justify internal programs to promote this technology to residential and commercial customers. For practical purposes, consumers are indifferent to the manner in which water is heated but are very interested in product attributes such as initial first cost, operating cost, performance, serviceability, product size, and installation costs. Thus, the principal drivers for penetrating markets are demonstrating reliability, leveraging the dehumidification attributes of the HPWH, and creating programs that embrace life-cycle cost principles. To supplement this, a product warranty with scrupulous quality control should be implemented; first-price reduction through engineering, perhaps by reducing level of energy efficiency, should be pursued; and niche markets should be courted. The first step toward market penetration is to address the HPWH's performance reliability. Next, the manufacturers could engage select utilities to aggressively market the HPWH. A good approach would be to target distinct segments of the market with the potential for the highest benefits from the technology. Communications media that address performance issues should be developed. When marketing to new home builders, the HPWH could be introduced as part of an energy-efficient package offered as a standard feature by builders of new homes within a community. Conducting focus groups across the United States to gather input on HPWH consumer values will feed useful data back to the manufacturers. ''Renaming'' and ''repackaging'' the HPWH to improve consumer perception, appliance aesthetics, and name recognition should be considered. Once an increased sales volume is achieved, the manufacturers

Technology assessment of solar energy utilization

Science.gov (United States)

Jaeger, F.

1985-11-01

The general objectives and methods of Technology Assessment (TA) are outlined. Typical analysis steps of a TA for solar energy are reviewed: description of the technology and its further development; identification of impact areas; analysis of boundary conditions and definition of scenarios; market penetration of solar technologies; projection of consequences in areas of impact; and assessment of impacts and identification of options for action.

A History of Rotorcraft Comprehensive Analyses

Science.gov (United States)

Johnson, Wayne

2013-01-01

A history of the development of rotorcraft comprehensive analyses is presented. Comprehensive analyses are digital computer programs that calculate the aeromechanical behavior of the rotor and aircraft, bringing together the most advanced models of the geometry, structure, dynamics, and aerodynamics available in rotary wing technology. The development of the major codes of the last five decades from industry, government, and universities is described. A number of common themes observed in this history are discussed.

Are Technology Interruptions Impacting Your Bottom Line? An Innovative Proposal for Change.

Science.gov (United States)

Ledbetter, Tamera; Shultz, Sarah; Beckham, Roxanne

2017-10-01

Nursing interruptions are a costly and dangerous variable in acute care hospitals. Malfunctioning technology equipment interrupts nursing care and prevents full utilization of computer safety systems to prevent patient care errors. This paper identifies an innovative approach to nursing interruptions related to computer and computer cart malfunctions. The impact on human resources is defined and outcome measures were proposed. A multifaceted proposal, based on a literature review, aimed at reducing nursing interruptions is presented. This proposal is expected to increase patient safety, as well as patient and nurse satisfaction. Acute care hospitals utilizing electronic medical records and bar-coded medication administration technology. Nurses, information technology staff, nursing informatics staff, and all leadership teams affected by technology problems and their proposed solutions. Literature from multiple fields was reviewed to evaluate research related to computer/computer cart failures, and the approaches used to resolve these issues. Outcome measured strategic goals related to patient safety, and nurse and patient satisfaction. Specific help desk metrics will demonstrate the effect of interventions. This paper addresses a gap in the literature and proposes practical and innovative solutions. A comprehensive computer and computer cart repair program is essential for patient safety, financial stewardship, and utilization of resources. © 2015 Wiley Periodicals, Inc.

Research on technology utilizing data freeway for base nuclear power materials

International Nuclear Information System (INIS)

Fujita, Mitsutane; Kurihara, Yutaka; Noda, Tetsuji; Shiraishi, Haruki; Kitajima, Masahiro; Nagakawa, Josei; Yamamoto, Norikazu

1997-01-01

In order to carry out the selection of the nuclear power materials which are used in radiation, from high temperature to very low temperature, and in corrosive environment, and the development of the materials effectively, the construction of huge material data base is indispensable. The development of the distributed type material data base called 'freeway' is advanced jointly by National Research Institute for Metals, Japan Atomic Energy Research Institute, Power Reactor and Nuclear Fuel Development Corporation and Japan Science and Technology Corporation. It has been aimed at that the results obtained in each research institute are made into a data base by that institute, and those data bases can be utilized mutually through network. In fiscal year 1996, the transfer to the system, by which the function showing the contents of system data and the function of data retrieval can be utilized from internet, was begun jointly. The present state of the data freeway, the operation environment of World Wide Web, and the trial making of the computation program for forecasting the change of the chemical composition of materials by neutron irradiation are reported. (K.I.)

Evolving technologies drive the new roles of Biomedical Engineering.

Science.gov (United States)

Frisch, P H; St Germain, J; Lui, W

2008-01-01

Rapidly changing technology coupled with the financial impact of organized health care, has required hospital Biomedical Engineering organizations to augment their traditional operational and business models to increase their role in developing enhanced clinical applications utilizing new and evolving technologies. The deployment of these technology based applications has required Biomedical Engineering organizations to re-organize to optimize the manner in which they provide and manage services. Memorial Sloan-Kettering Cancer Center has implemented a strategy to explore evolving technologies integrating them into enhanced clinical applications while optimally utilizing the expertise of the traditional Biomedical Engineering component (Clinical Engineering) to provide expanded support in technology / equipment management, device repair, preventive maintenance and integration with legacy clinical systems. Specifically, Biomedical Engineering is an integral component of the Medical Physics Department which provides comprehensive and integrated support to the Center in advanced physical, technical and engineering technology. This organizational structure emphasizes the integration and collaboration between a spectrum of technical expertise for clinical support and equipment management roles. The high cost of clinical equipment purchases coupled with the increasing cost of service has driven equipment management responsibilities to include significant business and financial aspects to provide a cost effective service model. This case study details the dynamics of these expanded roles, future initiatives and benefits for Biomedical Engineering and Memorial Sloan Kettering Cancer Center.

Rapid detection of structural variation in a human genome using nanochannel-based genome mapping technology

DEFF Research Database (Denmark)

Cao, Hongzhi; Hastie, Alex R.; Cao, Dandan

2014-01-01

mutations; however, none of the current detection methods are comprehensive, and currently available methodologies are incapable of providing sufficient resolution and unambiguous information across complex regions in the human genome. To address these challenges, we applied a high-throughput, cost......-effective genome mapping technology to comprehensively discover genome-wide SVs and characterize complex regions of the YH genome using long single molecules (>150 kb) in a global fashion. RESULTS: Utilizing nanochannel-based genome mapping technology, we obtained 708 insertions/deletions and 17 inversions larger...... fosmid data. Of the remaining 270 SVs, 260 are insertions and 213 overlap known SVs in the Database of Genomic Variants. Overall, 609 out of 666 (90%) variants were supported by experimental orthogonal methods or historical evidence in public databases. At the same time, genome mapping also provides...

Space Resource Utilization: Technologies and Potential Synergism with Terrestrial Mining

Science.gov (United States)

Sanders, Gerald B.

2015-01-01

Space Resources and Their Uses: The idea of using resources in space to support human exploration and settlement or for economic development and profit beyond the surface of Earth has been proposed and discussed for decades. Work on developing a method to extract oxygen from lunar regolith started even before humans set foot on the Moon for the first time. The use of space resources, commonly referred to as In Situ Resource Utilization (ISRU), involves the processes and operations to harness and utilize resources in space (both natural and discarded) to create products for subsequent use. Potential space resources include water, solar wind implanted volatiles (hydrogen, helium, carbon, nitrogen, etc.), vast quantities of metals and minerals in extraterrestrial soils, atmospheric constituents, unlimited solar energy, regions of permanent light and darkness, the vacuum and zero-gravity of space itself, trash and waste from human crew activities, and discarded hardware that has completed its primary purpose. ISRU covers a wide variety of concepts, technical disciplines, technologies, and processes. When considering all aspects of ISRU, there are 5 main areas that are relevant to human space exploration and the commercialization of space: 1. Resource Characterization and Mapping, 2. In Situ Consumables Production, 3. Civil Engineering and Construction, 4. In Situ Energy Production and Storage, and 5. In Situ Manufacturing.

Effect of regulation on the rate of adoption of cost saving scale technology in the electric utility industry: a portfolio approach

International Nuclear Information System (INIS)

Scheraga, C.A.

1984-01-01

This study presents a new analytical framework for examining the relationship between regulation and the investment behavior of electric utilities. The particular kind of investment behavior considered is the adoption of new as well as innovative electrical generation technology. The technologies of interest are large scale coal and nuclear generation plants. The theoretical model used in this study differs from traditional approaches in its utilization of a behavioral framework of analysis. The responsiveness of utilities to the required rate of return demanded by stockholders is demonstrated using an augmented form of the standard Capital Asset Pricing Model. Regulation is viewed as affecting utility investment behavior through the effect of the actions of regulatory commissions on the required rate of return that utilities must earn on equity. The particular regulatory policies considered are modification of existing rate structure, automatic adjustment clauses, and required efficiency standards. These policies are of particular interest both because their effects have not been previously examined in detail, and because they are recommended for adoption in the Public Utility Regulatory Policies Act of 1978. It is demonstrated empirically that the above policies do affect the required rate of return for utilities and hence their innovative investment behavior

Understanding the health care utilization of children who require medical technology: A descriptive study of children who require tracheostomies.

Science.gov (United States)

Spratling, Regena

2017-04-01

Children who require medical technology have complex chronic illnesses. This medical technology, including ventilators, oximeters, tracheostomy tubes, and feeding tubes, allows children and their families to live at home; however, the management of the children's care by informal caregivers is complex with the need for intensive, specialized care. The purpose of this study was to examine the sociodemographic and clinical characteristics that affect health care utilization in a population of children who require medical technology. A retrospective electronic health record (EHR) review was completed on the EHR records on 171 children who require medical technology, specifically tracheostomies, at an outpatient technology dependent pulmonary clinic over a three year period (January 2010-December 2012). Descriptive statistics were used to analyze sociodemographic and clinical characteristics, including medical diagnoses, and emergency department (ED) visits and hospitalizations. Of the 171 children requiring medical technology studied, there were numerous medical diagnoses (n=791), 99% had chronic illnesses affecting two or more body systems, and 88% required two or more technologies, including a tracheostomy and a feeding tube. In addition, 91% of the children had at least one ED visit or hospitalization and were treated in the ED approximately three times over the three year period. The findings from this study noted an increased utilization of health care by these children, and identified common symptoms and medical technologies for which caregivers may need interventions, focusing on education in managing symptoms and medical technology prior to presentation to the ED or hospital. Copyright © 2017 Elsevier Inc. All rights reserved.

Collection of outlines of Sunshine Program achievement reports for fiscal 1988. Solar energy (Light utilizing technology and heat utilizing technology); 1988 nendo sunshine keikaku seika hokokusho gaiyoshu. Taiyo energy (hikari riyo gijutsu / netsu riyo gijutsu)

Energy Technology Data Exchange (ETDEWEB)

NONE

1989-04-01

Collected concerning the research and development of photovoltaic power systems are the basic research on solar cells; research and development of new-type photovoltaic power systems; and research and development of amorphous solar cells. Collected concerning the development of technologies for the practical application of photovoltaic power systems are the experiment, refining, and verification of low-cost silicon; experiment, fabrication, and verification of solar panels; research on the practical application of high-efficiency crystal-based solar cells; research and development of amorphous solar cells; research and development of solar cell evaluation systems; development of peripheral technologies; research and development of photovoltaic power-aided systems; research and development of centralized photovoltaic power systems; and development of photothermal hybrid type photovoltaic power systems. Collected concerning heat-utilizing technologies are the research and development of solar thermal electric power generation systems; research and development of solar air-conditioners and hot water supply systems; and development of practical application technologies for industrial solar systems. Collected also are international cooperative projects on solar energy technologies. (NEDO)

Process technology of luwak coffee through bioreactor utilization

Science.gov (United States)

Hadipernata, M.; Nugraha, S.

2018-01-01

Indonesia has an advantage in producing exotic coffee that is Luwak coffee. Luwak coffee is produced from the fermentation process in digestion of civet. Luwak coffee production is still limited due to the difficulty level in the use of civet animals as the only medium of Luwak coffee making. The research was conducted by developing technology of luwak coffee production through bioreactor utilization and addition the bacteria isolate from gastric of civet. The process conditions in the bioreactor which include temperature, pH, and bacteria isolate of civet are adjusted to the process that occurs in civet digestion, including peristaltic movement on the stomach and small intestine of the civet will be replaced by the use of propellers that rotate on the bioreactor. The result of research showed that proximat analysis data of artificial/bioreactor luwak coffee did not significant different with original luwak coffee. However, the original luwak coffee has higher content of caffeine compared to bioreactor luwak coffee. Based on the cuping test the bioreactor luwak coffee has a value of 84.375, while the original luwak coffee is 84.875. As the result, bioreactor luwak coffee has excellent taste that similiar with original luwak coffee taste.

Helping Mathematics Teachers Develop Noticing Skills: Utilizing Smartphone Technology for One-on-One Teacher/Student Interviews

Science.gov (United States)

Chao, Theodore; Murray, Eileen; Star, Jon R.

2016-01-01

Teaching mathematics for understanding requires listening to each student's mathematical thinking, best elicited in a one-on-one interview. Interviews are difficult to enact in a teacher's busy schedule, however. In this study, the authors utilize smartphone technology to help mathematics teachers interview a student in a virtual one-on-one…

Impacts of Captioned Movies on Listening Comprehension

Science.gov (United States)

Janfaza, Abusaied; Jelyani, Saghar Javidi; Soori, Afshin

2014-01-01

With the advent of technology, the implication of authentic multimedia-based teaching materials are using widely in language classrooms. Technology can be in service of teaching different skills such as listening, reading, speaking and writing. Among these skills listening comprehension is a skill in which the learners have problems to master.…

Improvement of condition-based maintenance technology by utilization of thermography

International Nuclear Information System (INIS)

Shimada, Hiroki

2004-01-01

In the United States, condition-based maintenance technology comprising IR thermography (hereafter ''thermography'' for short) has been regarded in recent years as the established means for effectively improvement the performance of accident-preventive measures for nuclear power stations. As very few nuclear power plants in Japan have been utilizing the technology, measures for allowing power station personnel to use the technology with ease have been studied on an empirical basis. First, in view of improving the measuring efficiency to determine temperatures more accurately with a single measurement, principal factors affecting the measured temperature values have been analyzed. As a result, it has been found effective for accurate temperature measurement to make use of the table to radiation rates that have been determined for each facility coating specification by using a black body tape and to determine the measuring spot by avoiding rear heat sources (influence of reflection ratio) and background noise (influence of scattered light). Concurrently, as a result of determining the IR attenuation in the atmosphere, thermographic measurement has been found feasible without any significant attenuation as long as the distance is below 10 meters. Further, every power station facility (mainly electrical facilities) that is immune to thermography has been identified. These study results have been documented in the form of the ''Thermography Measurement Manual'' by also including in it the descriptions on abnormal thermal images and the judgment criteria at elevated temperatures that have been used in the United States. Based on these accomplishments, condition-based maintenance technology employing thermography has been applied to on-site investigation of nuclear power stations, and the effectiveness of thermography-aided accident-prevention has been demonstrated by detecting locally temperature rising spots of power cable joints. Moreover, with respect to maintenance

Primary treatments for clinically localised prostate cancer: a comprehensive lifetime cost-utility analysis.

Science.gov (United States)

Cooperberg, Matthew R; Ramakrishna, Naren R; Duff, Steven B; Hughes, Kathleen E; Sadownik, Sara; Smith, Joseph A; Tewari, Ashutosh K

2013-03-01

WHAT'S KNOWN ON THE SUBJECT? AND WHAT DOES THE STUDY ADD?: Multiple treatment alternatives exist for localised prostate cancer, with few high-quality studies directly comparing their comparative effectiveness and costs. The present study is the most comprehensive cost-effectiveness analysis to date for localised prostate cancer, conducted with a lifetime horizon and accounting for survival, health-related quality-of-life, and cost impact of secondary treatments and other downstream events, as well as primary treatment choices. The analysis found minor differences, generally slightly favouring surgical methods, in quality-adjusted life years across treatment options. However, radiation therapy (RT) was consistently more expensive than surgery, and some alternatives, e.g. intensity-modulated RT for low-risk disease, were dominated - that is, both more expensive and less effective than competing alternatives. To characterise the costs and outcomes associated with radical prostatectomy (open, laparoscopic, or robot-assisted) and radiation therapy (RT: dose-escalated three-dimensional conformal RT, intensity-modulated RT, brachytherapy, or combination), using a comprehensive, lifetime decision analytical model. A Markov model was constructed to follow hypothetical men with low-, intermediate-, and high-risk prostate cancer over their lifetimes after primary treatment; probabilities of outcomes were based on an exhaustive literature search yielding 232 unique publications. In each Markov cycle, patients could have remission, recurrence, salvage treatment, metastasis, death from prostate cancer, and death from other causes. Utilities for each health state were determined, and disutilities were applied for complications and toxicities of treatment. Costs were determined from the USA payer perspective, with incorporation of patient costs in a sensitivity analysis. Differences across treatments in quality-adjusted life years across methods were modest, ranging from 10.3 to

Utilizing information technologies for lifelong monitoring in diabetes patients.

Science.gov (United States)

Capozzi, Davide; Lanzola, Giordano

2011-01-01

Information and communication technologies have long been acknowledged to support information sharing along the whole chain of care, from the clinic to the homes of patients and their relatives. Thus they are increasingly being considered for improving the delivery of health care services also in light of clinical and technological achievements that propose new treatments requiring a tighter interaction among patients and physicians. The multiagent paradigm has been utilized within an architecture for delivering telemedicine services to chronic outpatients at their domiciles and enforcing cooperation among patients, caregivers, and different members of the health care staff. The architecture sees each communication device such as a palmtop, smart phone, or personal digital assistant as a separate agent upon which different services are deployed, including telemetry, reminders, notifications, and alarms. Decoupling services from agents account for a highly configurable environment applicable to almost any context that can be customized as needed. The architecture has been used for designing and implementing a prototypical software infrastructure, called LifePhone, that runs on several communication devices. A basic set of services has been devised with which we were able to configure two different applications that address long-term and short-term monitoring scenarios for diabetes patients. The long-term scenario encompasses telemetry and reminder services for patients undergoing peritoneal dialysis, which is a treatment for chronic renal failure, a diabetes complication. The short-term scenario incorporates telemetry and remote alarms and is applicable for training patients to use an artificial pancreas. Our experiments proved that an infrastructure such as LifePhone can be used successfully for bridging the interaction gap that exists among all the components of a health care delivery process, improving the quality of service and possibly reducing the overall

Research and development of power reactor technology supporting work, 3; Development of utility facility operation management technique

Energy Technology Data Exchange (ETDEWEB)

1990-03-01

Demands on utility facilities for nuclear technology development are increasingly sophisticated and diversified. It is important to meet requirements of securing the reliability of utility supply and ensuring the safety of facility operation and maintenance by means of technical supporting, data supply and quick contingency responses. A New computer system to make practicable man-machine interface, real-time data acquisition and operation data centralization has been developed based on the knowledge. Obtained from data base information and operation experience for the purpose of operation efficiency and labor saving. (author).

Analysis of technologies and experiences for reducing occupational radiation dose and study for applying to regulations

Energy Technology Data Exchange (ETDEWEB)

Moon, Joo Hyun; Park, Moon Soo; Lee, Un Jang; Song, Jae Hyuk; Kim, Byeong Soo; Kim, Chong Uk [Seoul National Univ., Seoul (Korea, Republic of)

2003-01-15

To reduce Occupational Radiation Dose (ORD) effectively and enhance the radiological safety, the comprehensive assessment of the experiences to reduce ORD should be made by regulatory body as well as utilities. Hence, the objective of this study is to assess the experiences for reducing ORD from the regulatory viewpoint. With the research objective, the followings are performed in this research; analysis of occupational dose trends at domestic and foreign NPPs, identification of the effective technologies for reducing ORD, examination of the effects of the technologies for reducing ORD, derivation of the regulatory means for implementing he research results. From this study, the regulatory means for effective reduction of ORD are derived. Hence, the results can be utilized as a basic materials for ALARA requirements.

Evaluating Internal Technological Capabilities in Energy Companies

Directory of Open Access Journals (Sweden)

Mingook Lee

2016-03-01

Full Text Available As global competition increases, technological capability must be evaluated objectively as one of the most important factors for predominance in technological competition and to ensure sustainable business excellence. Most existing capability evaluation models utilize either quantitative methods, such as patent analysis, or qualitative methods, such as expert panels. Accordingly, they may be in danger of reflecting only fragmentary aspects of technological capabilities, and produce inconsistent results when different models are used. To solve these problems, this paper proposes a comprehensive framework for evaluating technological capabilities in energy companies by considering the complex properties of technological knowledge. For this purpose, we first explored various factors affecting technological capabilities and divided the factors into three categories: individual, organizational, and technology competitiveness. Second, we identified appropriate evaluation items for each category to measure the technological capability. Finally, by using a hybrid approach of qualitative and quantitative methods, we developed an evaluation method for each item and suggested a method to combine the results. The proposed framework was then verified with an energy generation and supply company to investigate its practicality. As one of the earliest attempts to evaluate multi-faceted technological capabilities, the suggested model can support technology and strategic planning.

Enhancing the Utilization of Information Communication Technology (ICT) among Home Economics Lecturers in South Eastern Nigeria

Science.gov (United States)

Ejinkeonye, Uju Bridget; Usoroh, Comfort I.

2016-01-01

The study was on enhancing the utilization of information communication Technology (ICT) among Home Economics lecturers in south Eastern Nigeria. The study adopted a survey method. The area of the study is south eastern Nigeria. Three research questions guided the study. The population was made up of 63 Home Economics lecturers from the six…

Electrical hand tools and techniques: A compilation. [utilization of space technology for tools and adapters

Science.gov (United States)

1974-01-01

Space technology utilization for developing tools, adapters, and fixtures and procedures for assembling, installing, and servicing electrical components and equipment are discussed. Some of the items considered are: (1) pivotal screwdriver, (2) termination locator tool for shielded cables, (3) solder application tools, (4) insulation and shield removing tool, and (5) torque wrench adapter for cable connector engaging ring. Diagrams of the various tools and devices are provided.

Utility accommodation and conflict tracker (UACT) installation and configuration manual.

Science.gov (United States)

2009-02-01

Project 0-5475 performed a comprehensive analysis of utility conflict data/information flows between utility : accommodation stakeholders in the Texas Department of Transportation project development process, : developed data models to accommodate wo...

Utilizing Solar Power Technologies for On-Orbit Propellant Production

Science.gov (United States)

Fikes, John C.; Howell, Joe T.; Henley, Mark W.

2006-01-01

The cost of access to space beyond low Earth orbit may be reduced if vehicles can refuel in orbit. The cost of access to low Earth orbit may also be reduced by launching oxygen and hydrogen propellants in the form of water. To achieve this reduction in costs of access to low Earth orbit and beyond, a propellant depot is considered that electrolyzes water in orbit, then condenses and stores cryogenic oxygen and hydrogen. Power requirements for such a depot require Solar Power Satellite technologies. A propellant depot utilizing solar power technologies is discussed in this paper. The depot will be deployed in a 400 km circular equatorial orbit. It receives tanks of water launched into a lower orbit from Earth, converts the water to liquid hydrogen and oxygen, and stores up to 500 metric tons of cryogenic propellants. This requires a power system that is comparable to a large Solar Power Satellite capable of several 100 kW of energy. Power is supplied by a pair of solar arrays mounted perpendicular to the orbital plane, which rotates once per orbit to track the Sun. The majority of the power is used to run the electrolysis system. Thermal control is maintained by body-mounted radiators; these also provide some shielding against orbital debris. The propellant stored in the depot can support transportation from low Earth orbit to geostationary Earth orbit, the Moon, LaGrange points, Mars, etc. Emphasis is placed on the Water-Ice to Cryogen propellant production facility. A very high power system is required for cracking (electrolyzing) the water and condensing and refrigerating the resulting oxygen and hydrogen. For a propellant production rate of 500 metric tons (1,100,000 pounds) per year, an average electrical power supply of 100 s of kW is required. To make the most efficient use of space solar power, electrolysis is performed only during the portion of the orbit that the Depot is in sunlight, so roughly twice this power level is needed for operations in sunlight

The technology of extracting gaseous fuel based on comprehensive in situ gasification and coalbed degassing

Directory of Open Access Journals (Sweden)

А. Н. Шабаров

2016-08-01

Full Text Available The study considers a comprehensive technology (designed and patented by the authors of developing coal and methane deposits which combines in situ gasification of lower coalbeds in the suite of rock bump hazardous gassy beds, extraction of coal methane and mechanized mining of coal. The first stage of the technology consists in mining gaseous fuel that enables one to extract up to 15-20 % of total energy from the suite of coalbeds. Geodynamic zoning is used to select positions for boring wells. Using the suggested technology makes it possible to solve a number of tasks simultaneously. First of all that is extracting gaseous fuel from the suite of coalbeds without running any mining works while retaining principal coalbeds in the suite and preparing them for future processing (unloading and degassing. During the first phase the methane-coal deposit works as a gas deposit only, the gas having two sources – extracted methane (which includes its locked forms, absorbed and adsorbed and the products of partial incineration of thin coalbeds, riders and seams from thee suite. The second stage consists in deep degassing and unloading of coal beds which sharply reduces the hazards of methane explosion and rock bumps, thus increasing the productivity of mechanized coal mining. During the second stage coal is mined in long poles with the account of degassing and unloading of coal beds, plus the data on gas dynamic structure of coal rock massif.

Knowledge and utilization of information communication technology (ICT) among health science students at the University of Gondar, North Western Ethiopia.

Science.gov (United States)

Woreta, Solomon Assefa; Kebede, Yigzaw; Zegeye, Desalegn Tegabu

2013-03-03

Despite the relatively huge ICT investment and policy deployment in higher institutions in Ethiopia, there is still scant information about the success of implementation of the Information Communication Technology (ICT) in the higher education. This study, therefore, was carried out with an aim to assess knowledge and utilization of Information Communication Technology (ICT) among medicine and health science students and its associated factors in Gondar College of Medicine and Health sciences, University of Gondar. A cross-sectional study was conducted at the College of Medicine and Health Sciences, University of Gondar, Ethiopia. Data regarding socio-demographic characteristics of the students, level of knowledge and utilization of ICT were collected by means of a self-administered questionnaire. Data was analyzed using SPSS version 13. A total of 1096 students responded giving a response rate of 97.8%. The mean age of the study participants was 20.3 (±1. 3) years. Females constitute only 26% of the respondents. The majority (79%) were fulltime students. Only half of the respondents (51%) had ICT knowledge and only 46% students utilized ICT while 47% of the respondents never used electronic communication (e.g. email or chat room) and 39% of the respondents never used Microsoft office (e.g. word (®) or WordPerfect (®)). ICT knowledge [AOR = 2.5, 95% CI: 1.7-3.5], family educational background [AOR = 4.36, 95% CI: 2.16-8.80], and perceived quality of training [AOR = 1.9, 95% CI: 1.3-2.8] showed strong and positive associations with ICT utilization. Students from urban areas were more likely to utilize ICT compared with those from rural areas [AOR = 2.7, 95% CI: 2.097, 3.497], and information technology training was found to be positively associated with ICT utilization [AOR = 2. 07, 95% CI: 1.18, 3.62]. The result showed that students' knowledge was inadequate and utilization of ICT was poor. Therefore, the university should sustain professional development to

Knowledge and utilization of information communication technology (ICT) among health science students at the University of Gondar, North Western Ethiopia

Science.gov (United States)

2013-01-01

Background Despite the relatively huge ICT investment and policy deployment in higher institutions in Ethiopia, there is still scant information about the success of implementation of the Information Communication Technology (ICT) in the higher education. This study, therefore, was carried out with an aim to assess knowledge and utilization of Information Communication Technology (ICT) among medicine and health science students and its associated factors in Gondar College of Medicine and Health sciences, University of Gondar. Methods A cross-sectional study was conducted at the College of Medicine and Health Sciences, University of Gondar, Ethiopia. Data regarding socio-demographic characteristics of the students, level of knowledge and utilization of ICT were collected by means of a self-administered questionnaire. Data was analyzed using SPSS version 13. Results A total of 1096 students responded giving a response rate of 97.8%. The mean age of the study participants was 20.3 (±1. 3) years. Females constitute only 26% of the respondents. The majority (79%) were fulltime students. Only half of the respondents (51%) had ICT knowledge and only 46% students utilized ICT while 47% of the respondents never used electronic communication (e.g. email or chat room) and 39% of the respondents never used Microsoft office (e.g. word ® or WordPerfect ®). ICT knowledge [AOR = 2.5, 95% CI: 1.7-3.5], family educational background [AOR = 4.36, 95% CI: 2.16-8.80], and perceived quality of training [AOR = 1.9, 95% CI: 1.3-2.8] showed strong and positive associations with ICT utilization. Students from urban areas were more likely to utilize ICT compared with those from rural areas [AOR = 2.7, 95% CI: 2.097, 3.497], and information technology training was found to be positively associated with ICT utilization [AOR = 2. 07, 95% CI: 1.18, 3.62]. Conclusions The result showed that students’ knowledge was inadequate and utilization of ICT was poor. Therefore, the

Utilizing Authentic Materials on Students’ Listening Comprehension: Does it have Any Influence?

Directory of Open Access Journals (Sweden)

Resti Citra Dewi

2018-02-01

Full Text Available The purpose of this study was to investigate the influence of using authentic materials on EFL students’ in listening comprehension. The participants of this study was the second year students of Junior High School in Indonesia, 2014/2015 academic year. The population of this study consisted of five parallel classes with the total number of the students was 190 students. Purposive sampling technique was used in this study. The participants were divided into two groups, the experimental was 38 students and the control group was 38 students. This study used experimental research. The instrument used in collecting data was multiple choice test. The total items of the test was 20 items. The finding shows that t-test (5.09 was higher than t-table (2.02 with the level of significance 0.05 and the degree of freedom (df = 36. It shows that the hypothesis alternative (ha was accepted. It means that using authentic materials has influence on students’ achievement in listening comprehension.

A Study to Ascertain the Feasibility of Joint Efforts to Establish a Comprehensive Health Care Delivery System Utilizing Hill-Burton Constructed Hospital,

Science.gov (United States)

1978-12-15

Utilization Review Procedures ................ 22 Reduced Philanthropy ......................... 22 Lack of Incentives ........................... 23 Reductions...challenges are made on hospitals in the form of status of technology, elite physician compliments, and increased specialization of labor which ccnstantly...construction are now marginally subsidized by philanthropy . Third party reimbursement is now the dominant source of hospital revenue with cost based formula

Day as a Pathologist: Utilization of Technology to Guide Students in Exploring Careers in Breast Cancer Pathology

Science.gov (United States)

Adler, Jacob J.; Judd, Mariah V.; Bringman, Lauren R.; Wells, Clark D.; Marrs, Kathleen A.

2013-01-01

We developed an interactive laboratory that allows students to identify and grade tissue samples from human breast biopsies, using techniques similar to those used by actual pathologists. This unique lab develops a practical and intellectual understanding of basic tissue structures that make up living systems, utilizing technology to bring…

Health information technology interventions enhance care completion, engagement in HIV care and treatment, and viral suppression among HIV-infected patients in publicly funded settings.

Science.gov (United States)

Shade, Starley B; Steward, Wayne T; Koester, Kimberly A; Chakravarty, Deepalika; Myers, Janet J

2015-04-01

The National HIV/AIDS Strategy (NHAS) emphasizes the use of technology to facilitate coordination of comprehensive care for people with HIV. We examined the effect of six health information technology (HIT) interventions in a Ryan White-funded Special Projects of National Significance (SPNS) on care completion services, engagement in HIV care, and viral suppression. Interventions included use of surveillance data to identify out-of-care individuals, extending access to electronic health records to support service providers, use of electronic laboratory ordering and prescribing, and development of a patient portal. Data from a sample of electronic patient records from each site were analyzed to assess changes in utilization of comprehensive care (prevention screening, support service utilization), engagement in primary HIV medical care (receipt of services and use of antiretroviral therapy), and viral suppression. We used weighted generalized estimating equations to estimate outcomes while accounting for the unequal contribution of data and differences in the distribution of patient characteristics across sites and over time. We observed statistically significant changes in the desired direction in comprehensive care utilization and engagement in primary care outcomes targeted by each site. Five of six sites experienced statistically significant increases in viral suppression. These results provide additional support for the use of HIT as a valuable tool for achieving the NHAS goal of providing comprehensive care for all people living with HIV. HIT has the potential to increase utilization of services, improve health outcomes for people with HIV, and reduce community viral load and subsequent transmission of HIV. © The Author 2014. Published by Oxford University Press on behalf of the American Medical Informatics Association. All rights reserved. For Permissions, please email: journals.permissions@oup.com For affiliation see end of article.

Achievement report for fiscal 1998 on development of environmentally friendly high-efficiency energy utilization system. 2. Research of technology of effectively utilizing high-efficiency energy / research of optimum system designing technology; 1998 nendo kankyo chowagata kokoritsu energy riyo system kaihatsu. 2. Kokoritsu energy yuko riyo gijutsu no kenkyu, saiteki system sekkei gijutsu no kenkyu

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-05-01

This 2nd volume deals with the transportation and storage of energy in the above-named research. In search of technologies for transporting exhausted heat from the industrial area to the urban section for consumers to utilize the heat for driving their air-conditioners and hot water supply systems, the decomposition and composition reactions of methanol are utilized for a long-range transportation system. The subjects taken up in this connection include the research and development of a methanol energy system, non-equilibrium high-efficiency methanol decomposition technology, multifunctional catalysts, and highly active/selective catalysts capable of promoting reversible endoergic/exoergic reactions. Research and development is also conducted of a high-efficiency heat pump technology using hydrogen-absorbing alloys, and such a pump will realize an air-conditioning system not dependent on chlorofluorocarbon. In the research and development of a long-range heat transportation system using hydrogen-absorbing alloys, a study is made of technologies of heat/hydrogen recovery, transportation, and utilization. (NEDO)

Innovative clean coal technology (ICCT): demonstration of selective catalytic reduction (SCR) technology for the control of nitrogen oxide (NOx) emission from high-sulfur, coal-fired boilers - economic evaluation of commercial-scale SCR applications for utility boilers

International Nuclear Information System (INIS)

Healy, E.C.; Maxwell, J.D.; Hinton, W.S.

1996-09-01

This report presents the results of an economic evaluation produced as part of the Innovative Clean Coal Technology project, which demonstrated selective catalytic reduction (SCR) technology for reduction of NO x emissions from utility boilers burning U.S. high-sulfur coal. The document includes a commercial-scale capital and O ampersand M cost evaluation of SCR technology applied to a new facility, coal-fired boiler utilizing high-sulfur U.S. coal. The base case presented herein determines the total capital requirement, fixed and variable operating costs, and levelized costs for a new 250-MW pulverized coal utility boiler operating with a 60-percent NO x removal. Sensitivity evaluations are included to demonstrate the variation in cost due to changes in process variables and assumptions. This report also presents the results of a study completed by SCS to determine the cost and technical feasibility of retrofitting SCR technology to selected coal-fired generating units within the Southern electric system

Self and External Monitoring of Reading Comprehension

Science.gov (United States)

Shiu, Ling-po; Chen, Qishan

2013-01-01

The present study compared the effectiveness of 2 approaches to remedy the inaccuracy of self-monitoring of reading comprehension. The first approach attempts to enhance self-monitoring by strengthening the cues utilized in monitoring. The second approach replaces self-monitoring with external regulation based on objective evaluative information.…

Proceedings of the 21st Seismic Research Symposium: Technologies for Monitoring The Comprehensive Nuclear Test-Ban Treaty

Energy Technology Data Exchange (ETDEWEB)

Warren, N. Jill [Editor

1999-09-21

These proceedings contain papers prepared for the 21st Seismic Research Symposium: Technologies for Monitoring The Comprehensive Nuclear-Test-Ban Treaty, held 21-24 September 1999 in Las Vegas, Nevada. These papers represent the combined research related to ground-based nuclear explosion monitoring funded by the National Nuclear Security Administration (NNSA), Defense Threat Reduction Agency (DTRA), Air Force Technical Applications Center (AFTAC), Department of Defense (DoD), the Comprehensive Nuclear-Test-Ban Treaty Organization (CTBTO), and other invited sponsors. The scientific objectives of the research are to improve the United States capability to detect, locate, and identify nuclear explosions. The purpose of the meeting is to provide the sponsoring agencies, as well as potential users, an opportunity to review research accomplished during the preceding year and to discuss areas of investigation for the coming year. For the researchers, it provides a forum for the exchange of scientific information toward achieving program goals, and an opportunity to discuss results and future plans. Paper topics include: seismic regionalization and calibration; detection and location of sources; wave propagation from source to receiver; the nature of seismic sources, including mining practices; hydroacoustic, infrasound, and radionuclide methods; on-site inspection; and data processing.

Technology acceptance for an Intelligent Comprehensive Interactive Care (ICIC system for care of the elderly: a survey-questionnaire study.

Directory of Open Access Journals (Sweden)

Alice M K Wong

Full Text Available The key components of caring for the elderly are diet, living, transportation, education, and safety issues, and telemedical systems can offer great assistance. Through the integration of personal to community information technology platforms, we have developed a new Intelligent Comprehensive Interactive Care (ICIC system to provide comprehensive services for elderly care. The ICIC system consists of six items, including medical care (physiological measuring system, Medication Reminder, and Dr. Ubiquitous, diet, living, transportation, education (Intelligent Watch, entertainment (Sharetouch, and safety (Fall Detection. In this study, we specifically evaluated the users' intention of using the Medication Reminder, Dr. Ubiquitous, Sharetouch, and Intelligent Watch using a modified technological acceptance model (TAM. A total of 121 elderly subjects (48 males and 73 females were recruited. The modified TAM questionnaires were collected after they had used these products. For most of the ICIC units, the elderly subjects revealed great willingness and/or satisfaction in using this system. The elderly users of the Intelligent Watch showed the greatest willingness and satisfaction, while the elderly users of Dr. Ubiquitous revealed fair willingness in the dimension of perceived ease of use. The old-old age group revealed greater satisfaction in the dimension of result demonstrability for the users of the Medication Reminder as compared to the young-old and oldest-old age groups. The women revealed greater satisfaction in the dimension of perceived ease of use for the users of Dr. Ubiquitous as compared to the men. There were no statistically significant differences in terms of gender, age, and education level in the other dimensions. The modified TAM showed its effectiveness in evaluating the acceptance and characteristics of technologic products for the elderly user. The ICIC system offers a user-friendly solution in telemedical care and improves the

Technology acceptance for an Intelligent Comprehensive Interactive Care (ICIC) system for care of the elderly: a survey-questionnaire study.

Science.gov (United States)

Wong, Alice M K; Chang, Wei-Han; Ke, Pei-Chih; Huang, Chun-Kai; Tsai, Tsai-Hsuan; Chang, Hsien-Tsung; Shieh, Wann-Yun; Chan, Hsiao-Lung; Chen, Chih-Kuang; Pei, Yu-Cheng

2012-01-01

The key components of caring for the elderly are diet, living, transportation, education, and safety issues, and telemedical systems can offer great assistance. Through the integration of personal to community information technology platforms, we have developed a new Intelligent Comprehensive Interactive Care (ICIC) system to provide comprehensive services for elderly care. The ICIC system consists of six items, including medical care (physiological measuring system, Medication Reminder, and Dr. Ubiquitous), diet, living, transportation, education (Intelligent Watch), entertainment (Sharetouch), and safety (Fall Detection). In this study, we specifically evaluated the users' intention of using the Medication Reminder, Dr. Ubiquitous, Sharetouch, and Intelligent Watch using a modified technological acceptance model (TAM). A total of 121 elderly subjects (48 males and 73 females) were recruited. The modified TAM questionnaires were collected after they had used these products. For most of the ICIC units, the elderly subjects revealed great willingness and/or satisfaction in using this system. The elderly users of the Intelligent Watch showed the greatest willingness and satisfaction, while the elderly users of Dr. Ubiquitous revealed fair willingness in the dimension of perceived ease of use. The old-old age group revealed greater satisfaction in the dimension of result demonstrability for the users of the Medication Reminder as compared to the young-old and oldest-old age groups. The women revealed greater satisfaction in the dimension of perceived ease of use for the users of Dr. Ubiquitous as compared to the men. There were no statistically significant differences in terms of gender, age, and education level in the other dimensions. The modified TAM showed its effectiveness in evaluating the acceptance and characteristics of technologic products for the elderly user. The ICIC system offers a user-friendly solution in telemedical care and improves the quality of

Utilization of internet technology by low-income adults: the role of health literacy, health numeracy, and computer assistance.

Science.gov (United States)

Jensen, Jakob D; King, Andy J; Davis, LaShara A; Guntzviller, Lisa M

2010-09-01

To examine whether low-income adults' utilization of Internet technology is predicted or mediated by health literacy, health numeracy, and computer assistance. Low-income adults (N = 131) from the midwestern United States were surveyed about their technology access and use. Individuals with low health literacy skills were less likely to use Internet technology (e.g., email, search engines, and online health information seeking), and those with low health numeracy skills were less likely to have access to Internet technology (e.g., computers and cell phones). Consistent with past research, males, older participants, and those with less education were less likely to search for health information online. The relationship between age and online health information seeking was mediated by participant literacy. The present study suggests that significant advances in technology access and use could be sparked by developing technology interfaces that are accessible to individuals with limited literacy skills.

Utilization of Microcapsule Technology in Foods.

Science.gov (United States)

Zhang, Chuanxiang; Li, Xiaolong; Liu, You-Nian; Zhang, Fengqin

2015-12-01

Microencapsulation technology has greatly accelerated the development of food industry and has a bright future for further applications. In this review paper, we introduce the current researches, latest advances and trends of core materials, wall materials, microencapsulation technology, as well as the encapsulation of food additives, bioactive substance, esculent oils, probiotics and other substances, and their application in food industry.

Ophthalmic patients' utilization of technology and social media: an assessment to improve quality of care.

Science.gov (United States)

Aleo, Chelsea L; Hark, Lisa; Leiby, Benjamin; Dai, Yang; Murchison, Ann P; Martinez, Patricia; Haller, Julia A

2014-10-01

E-health tools have the potential to improve the quality of care for ophthalmic patients, many of whom have chronic conditions. However, little research has assessed ophthalmic patients' use or acceptance of technological devices and social media platforms for health-related purposes. The present study evaluated utilization of technological devices and social media platforms by eye clinic patients, as well as their willingness to receive health reminders through these technologies. A 31-item paper questionnaire was administered to eye clinic patients (n=843) at an urban, tertiary-care center. Questions focused on technology ownership, comfort levels, frequency of use, and preferences for receiving health reminders. Demographic data were also recorded. Eye clinic patients most commonly owned cellular phones (90%), landline phones (81%), and computers (80%). Overall, eye clinic patients preferred to receive health reminders through phone calls and e-mail and used these technologies frequently and with a high level of comfort. Less than 3% of patients preferred using social networking to receive health reminders. In addition, age was significantly associated with technology ownership, comfort level, and frequency of use (ptechnologies more frequently and with a higher comfort level (ptechnologies for appointment reminders, general eye and vision health information, asking urgent medical questions, and requesting prescription refills. Future controlled trials could further explore the efficacy of e-health tools for these purposes.

Estimating CO{sub 2} Emission Reduction of Non-capture CO{sub 2} Utilization (NCCU) Technology

Energy Technology Data Exchange (ETDEWEB)

Lee, Ji Hyun; Lee, Dong Woog; Gyu, Jang Se; Kwak, No-Sang; Lee, In Young; Jang, Kyung Ryoung; Shim, Jae-Goo [KEPCO Research Institute, Daejon (Korea, Republic of); Choi, Jong Shin [Korea East-West Power Co., LTD(ETP), Ulsan (Korea, Republic of)

2015-10-15

Estimating potential of CO{sub 2} emission reduction of non-capture CO{sub 2} utilization (NCCU) technology was evaluated. NCCU is sodium bicarbonate production technology through the carbonation reaction of CO{sub 2} contained in the flue gas. For the estimating the CO{sub 2} emission reduction, process simulation using process simulator (PRO/II) based on a chemical plant which could handle CO{sub 2} of 100 tons per day was performed, Also for the estimation of the indirect CO{sub 2} reduction, the solvay process which is a conventional technology for the production of sodium carbonate/sodium bicarbonate, was studied. The results of the analysis showed that in case of the solvay process, overall CO{sub 2} emission was estimated as 48,862 ton per year based on the energy consumption for the production of NaHCO{sub 3} (7.4 GJ/tNaHCO{sub 3}). While for the NCCU technology, the direct CO{sub 2} reduction through the CO{sub 2} carbonation was estimated as 36,500 ton per year and the indirect CO{sub 2} reduction through the lower energy consumption was 46,885 ton per year which lead to 83,385 ton per year in total. From these results, it could be concluded that sodium bicarbonate production technology through the carbonation reaction of CO{sub 2} contained in the flue was energy efficient and could be one of the promising technology for the low CO{sub 2} emission technology.

Monitoring technology and firm boundaries: physician-hospital integration and technology utilization.

Science.gov (United States)

McCullough, Jeffrey S; Snir, Eli M

2010-05-01

We study the relationship between physician-hospital integration and its relation to monitoring IT utilization. We develop a theoretical model in which monitoring IT may complement or substitute for integration and test these relationships using a novel data source. Physician labor market heterogeneity identifies the empirical model. We find that monitoring IT utilization is increasing in integration, implying that expanded firm boundaries complement monitoring IT adoption. We argue that the relationship between monitoring IT and firm boundaries depends upon the contractibility of the monitored information.

Using interactive graphical and technological strategies for EFL reading comprehension: A case study involving engineering students

Directory of Open Access Journals (Sweden)

Julia Valeska Barraza

2014-09-01

Full Text Available This qualitative study engaged a group of engineering students in the use of interactive graphical and technological strategies called IGOs (interactive, graphic organisers software in order to improve their level of EFL reading comprehension. The learners were asked to use three different types of IGOs, causes and effects, a sequence of events and pros and cons. Data was gathered through an opinion’s survey with the intention of collecting and evaluating the students’ perceptions on the use of the IGOs software. Findings revealed that most of the learners answered positively. Students also expressed they wanted more opportunities to use this software; because they not only could improve their scores but also, they enjoyed the experience they had using the new strategies software.

The Nuclear option for U.S. electrical generating capacity additions utilizing boiling water reactor technology

International Nuclear Information System (INIS)

Garrity, T.F.; Wilkins, D.R.

1993-01-01

The technology status of the Advanced Boiling Water (ABWR) and Simplified Boiling Water (SBWR) reactors are presented along with an analysis of the economic potential of advanced nuclear power generation systems based on BWR technology to meet the projected domestic electrical generating capacity need through 2005. The forecasted capacity needs are determined for each domestic North American Electric Reliability Council (NERC) region. Extensive data sets detailing each NERC region's specific generation and load characteristics, and capital and fuel cost parameters are utilized in the economic analysis of the optimal generation additions to meet this need by use of an expansion planning model. In addition to a reference case, several sensitivity cases are performed with regard to capital costs and fuel price escalation

Development of radiation utilization for economic growth in China

International Nuclear Information System (INIS)

Lu Yanxiao

1994-01-01

The program of radiation utilization in China was initiated with the development of nuclear industry in the late 1950s. From then on, the establishment of relatively comprehensive nuclear industrial system and a fair number of talent technical personnel have laid the foundation for radiation utilization in industry, agriculture, medicine and so on. Radioisotopes and radiation become one of the most effective means for acquiring data and information and changing material properties in modern techniques. They are, in many respects, unique and cannot replaced by other techniques. In recent years the considerable progress in the development, commercialization and large-scale utilization of radioisotopes and radiation has been creating economic and social benefits for Chinese modernization. The applications in agriculture have mainly embodied in mutation breeding of crops and so on through radiation or in combination with other methods to provide excellent mutant varieties. The important applications in medicine are the medical diagnosis with radioimmunoassay (RIA) and radiopharmaceutical imaging, and cancer therapy with radioisotopes and electron beam. Well-established methods have bee offered for routine clinic applications to help to heal the patients and rescue the lives. The industrial applications are of key importance in economic growth in China. In fact, radiation processing and nucleonic control systems (NCS) for industrial utilization are very useful to technological transformation of Chinese traditional industries. The radiation utilization in industries can be emerging as new high-tech industries. A fuller exploitation of radiation utilization is expected to meet the requirements of high growth of national economy and to bridge the gap between China and the developed countries in the world in nuclear application. (author)

Development of radiation utilization for economic growth in China

Energy Technology Data Exchange (ETDEWEB)

Yanxiao, Lu [China Nuclear Information Center, Beijing, BJ (China)

1994-01-01

The program of radiation utilization in China was initiated with the development of nuclear industry in the late 1950s. From then on, the establishment of relatively comprehensive nuclear industrial system and a fair number of talent technical personnel have laid the foundation for radiation utilization in industry, agriculture, medicine and so on. Radioisotopes and radiation become one of the most effective means for acquiring data and information and changing material properties in modern techniques. They are, in many respects, unique and cannot replaced by other techniques. In recent years the considerable progress in the development, commercialization and large-scale utilization of radioisotopes and radiation has been creating economic and social benefits for Chinese modernization. The applications in agriculture have mainly embodied in mutation breeding of crops and so on through radiation or in combination with other methods to provide excellent mutant varieties. The important applications in medicine are the medical diagnosis with radioimmunoassay (RIA) and radiopharmaceutical imaging, and cancer therapy with radioisotopes and electron beam. Well-established methods have bee offered for routine clinic applications to help to heal the patients and rescue the lives. The industrial applications are of key importance in economic growth in China. In fact, radiation processing and nucleonic control systems (NCS) for industrial utilization are very useful to technological transformation of Chinese traditional industries. The radiation utilization in industries can be emerging as new high-tech industries. A fuller exploitation of radiation utilization is expected to meet the requirements of high growth of national economy and to bridge the gap between China and the developed countries in the world in nuclear application. (author).

Development of a comprehensive plan for utilization of digester gas moves towards energy self-sufficiency in Chicago, USA.

Science.gov (United States)

Kunetz, Thomas E; Fink-Finowicki, Jarek; McGowan, Steve; Auerbach, Eric

2012-01-01

The Metropolitan Water Reclamation District (MWRD) of Greater Chicago's Stickney Water Reclamation Plant (SWRP) anaerobically digests approximately 430 dry tons per day (dtpd) (390 dry metric tons per day) of solids and produces 3.4 million ft(3)/day (96 thousand m(3)/day) of biogas from the anaerobic digesters, making it one of the largest municipal digester gas complexes in the world. Installation of new treatment processes, as well as future increases in flows and loads to the plant, are expected to significantly increase production of biologically degradable sludge and biogas. This paper presents a comprehensive planning study that was completed to identify and evaluate alternatives for utilization of this biogas. The best, sustainable approach was identified, taking into consideration economics, social impacts, and environmental impacts. The model results indicate that the most economically favorable scenario involves installing a cogeneration facility to produce electricity on-site, and operating it in conjunction with the plant's existing boilers to satisfy the heating needs of the plant. This scenario also provides the greatest reduction in GHG offsets at the power plants.

A Comprehensive Tool for Exploring the Availability, Scalability and Growth Potential of Conventional and Renewable Energy Sources and Technologies

Science.gov (United States)

Jack-Scott, E.; Arnott, J. C.; Katzenberger, J.; Davis, S. J.; Delman, E.

2015-12-01

It has been a generational challenge to simultaneously meet the world's energy requirements, while remaining within the bounds of acceptable cost and environmental impact. To this end, substantial research has explored various energy futures on a global scale, leaving decision-makers and the public overwhelmed by information on energy options. In response, this interactive energy table was developed as a comprehensive resource through which users can explore the availability, scalability, and growth potentials of all energy technologies currently in use or development. Extensive research from peer-reviewed papers and reports was compiled and summarized, detailing technology costs, technical considerations, imminent breakthroughs, and obstacles to integration, as well as political, social, and environmental considerations. Energy technologies fall within categories of coal, oil, natural gas, nuclear, solar, wind, hydropower, ocean, geothermal and biomass. In addition to 360 expandable cells of cited data, the interactive table also features educational windows with background information on each energy technology. The table seeks not to advocate for specific energy futures, but to succinctly and accurately centralize peer-reviewed research and information in an interactive, accessible resource. With this tool, decision-makers, researchers and the public alike can explore various combinations of energy technologies and their quantitative and qualitative attributes that can satisfy the world's total primary energy supply (TPES) while making progress towards a near zero carbon future.

Description of a comprehensive mathematical model

DEFF Research Database (Denmark)

Li, Xiyan; Yin, Chungen

2017-01-01

Biomass gasification is still a promising technology after over 30 years’ research and development and has success only in a few niche markets. In this paper, a comprehensive mathematical model for biomass particle gasification is developed within a generic particle framework, assuming the feed...

Study on the Potential Development of Rainwater Utilization in the Hilly City of Southern China

Science.gov (United States)

Fu, Xiaoran; Liu, Jiahong; Shao, Weiwei; Zhang, Haixing

2017-12-01

Aimed at the current flood problems and the contradiction between supply and demand of water resources in the southern cities of China, the comprehensive utilization of Urban Rainwater Resources (URRs) is a significant solution. At present, the research on the comprehensive utilization system of urban rainwater resources in China is still immature, especially the lack of a comprehensive method for the comprehensive utilization of the rainwater and flood resources in the south. Based on the current mode for utilization of URRs at home and abroad, Fenghuang County in Hunan Province was taken as a case of study, which is a typical mountainous city in the southern China. And the potential development of URRs was simulated and evaluated with a comparison of before and after the exploitation and utilization of URRs in this paper. The reduction effect of flood and waterlogging on the ancient city area is analyzed from SWMM. The simulation results show that the potential of exploitation and utilization of URRs in Fenghuang county is remarkable under the mode of exploitation and utilization which is given priority to flood prevention and control, and the annual development potential is 4.865×105 m3. The rainwater utilization measures of flood control effect is obvious with this mode, and the relevant research results can provide theoretical and technical support for enhancing urban water security capability, water conservation capacity, and disaster mitigation of urban flood.

Technological advances in the treatment of trauma: a review of promising practices.

Science.gov (United States)

Paul, Lisa A; Hassija, Christina M; Clapp, Joshua D

2012-11-01

Given the availability of empirically supported practices for addressing posttraumatic stress disorder and other forms of trauma-related distress, the development and implementation of new technology to deliver these treatments is exciting. Technological innovations in this literature aim to expand availability of empirically based intervention, increase treatment adherence and acceptability, and overcome barriers commonly encountered with conventional trauma-focused treatment. Much of the current research on these technological developments consists of brief reviews and case studies of the separate therapy modalities. Although this work serves to document the appeal and utility of these innovations, it does not provide comprehensive information about the host of options available. To that end, the three general categories of technological advances in trauma therapy (i.e., videoconferencing, e-Health, virtual reality) are reviewed here, including information regarding their empirical support and suggestions for future research and clinical practice.

Principals' Personal Variables and Information and Communication Technology Utilization in Federal Capital Territory Senior Secondary Schools, Abuja, Nigeria

Science.gov (United States)

Ogunshola, Roseline Folashade; Adeniyi, Abiodun

2017-01-01

The study investigated principals' personal variables and information and communication technology utilization in Federal Capital Territory (FCT) senior secondary schools, Abuja, Nigeria. The study adopted the correlational research design. The study used a sample of 94 senior secondary schools (including public and private) in FCT. Stratified…

Utilization of renewable energy in architectural design

Institute of Scientific and Technical Information of China (English)

TIAN Lei; QIN Youguo

2007-01-01

Renewable energy does not simply equal to using a photovoltaic (PV) board.In addition to heating,ventilation and air conditioning (HVAC) engineering considerations,the design approaches of architects are crucial to the utilization condition and methods of renewable energy.Through profound comprehension of the relationship between renewable energy utilization and design approaches,we can achieve a dual-standard of building environment performance and esthetics.

Dynamic integrated assessment of bioenergy technologies for energy production utilizing agricultural residues: An input–output approach

International Nuclear Information System (INIS)

Song, Junnian; Yang, Wei; Higano, Yoshiro; Wang, Xian’en

2015-01-01

Highlights: • A dynamic input–output model is developed with bioenergy technologies complemented. • Availability of agricultural residues for bioenergy technologies is evaluated. • Trends in electricity and biofuel production are simulated dynamically. • Net profit and GHG mitigation contribution of bioenergy technologies are assessed. • Combustion power generation and briquette fuel are more advantageous. - Abstract: In order to facilitate regional agricultural residue utilization for energy production through bioenergy technologies, a dynamic input–output model is developed to estimate and assess the energy, economic and environmental performances of industrialization of five bioenergy technologies within a 15-year time horizon. Electricity and solid, gaseous and liquid biofuels are energy products of bioenergy technologies. Bioenergy technologies are complemented into regional input–output framework and combined with socioeconomic activities aided by their bottom-up economic and energy parameters. The simulation results for the target area indicate that the agricultural residues available for bioenergy technologies could amount to 55.16 million t, facilitating to 8.38 million t coal-equivalent bioenergy production by 2025. A 3.1% net reduction in accumulative greenhouse gas emission compared with the “business as usual” case could be achieved owing to substitution of fossil energy with electricity and biofuels produced by bioenergy technologies. From energy production, economic benefits and greenhouse gas mitigation three aspects integratedly, direct-combustion power generation and briquette fuel are more advantageous in the target area. The quantified energy, economic and environmental performances of bioenergy technologies are expected to give recommendations for their industrial development.

Examining the Relationship between Technological Pedagogical Content Knowledge (TPACK) and Student Achievement Utilizing the Florida Value-Added Model

Science.gov (United States)

Farrell, Ivan K.; Hamed, Kastro M.

2017-01-01

Utilizing a correlational research design, we sought to examine the relationship between the technological pedagogical content knowledge (TPACK) of in-service teachers and student achievement measured with each individual teacher's Value-Added Model (VAM) score. The TPACK survey results and a teacher's VAM score were also examined, separately,…

Comprehensive Stuttering Treatment or Adolescents: A Case Study

Science.gov (United States)

Coleman, Craig E.

2018-01-01

Purpose: This article will focus on a hypothetical case study to highlight comprehensive assessment and treatment for adolescent children who stutter. Method: Assessment and treatment are laid out with a literature review utilizing the components of the International Classification of Functioning, Disability and Health model. Specific assessment…

Comprehensive Study on Small and Low Cost Satellite Technology for Earth Observation with Case Study for Indonesia: Projection for 2002-2022

Science.gov (United States)

Djojodihardjo, Harijono

and economic progress, while facing global competitiveness locally as opportunities and challenges. Of particular importance is the utilization and development of earth observation capabilities for environmental natural resources imperatives to this end is quite significant. On one hand there may appear challenges to achieve unique and high quality requirements on many of the elements of social and economic progress, i.e. natural resources, human resources, market opportunities and geographical advantage; on the other hand one may face constraints in the financial system, cultural inertia and paradigm, and the need to carry forward large momentum that may pull back technological and economic progress that may be characterized by a "roller coaster" dynamics. Satellite Technology for Earth Observation, its Utilization and Development is carried out with Indonesian Development Interest in mind. Space System Services and Players are identified. Mission objectives associated with Urban and Rural Areas as well as Satellite-Based Multimedia Technology Applications For Promoting Rural Development will be identified. System design analysis and synthesis will be elaborated and some alternatives will be presented following a unified system outlook. Ground Segment and Space Segment Architecture will be elaborated by carrying out Architecture Optimization.

Micro-PNT and Comprehensive PNT

Directory of Open Access Journals (Sweden)

YANG Yuanxi

2017-10-01

Full Text Available Comprehensive or integrated positioning, navigation and timing is an obvious developing trend following the global navigation satellite system.This paper summarizes the current status of micro-PNT and its developing requirements. The related key technologies are described and the relationship between comprehensive PNT and micro-PNT is analyzed. It is stressed that the comprehensive PNT needs massive infrastructure construction and investment, however, the micro-PNT aims at the integrated applications of high-tech micro sensors. It is different from the current opinions appeared in the literatures, micro-PNT should include multi GNSS integration and micro components of navigation and timing in order to make the PNT outputs refer to a unified coordinate datum and time scale. Micro-PNT focuses on the personalized micro terminal applications. Except for the miniaturization of each PNT component, micro-PNT aims at the deep integration of the micro sensors, adaptive data fusion and self calibration of each component.

Evaluating the limits of solar photovoltaics (PV) in electric power systems utilizing energy storage and other enabling technologies

International Nuclear Information System (INIS)

Denholm, Paul; Margolis, Robert M.

2007-01-01

In this work, we evaluate technologies that will enable solar photovoltaics (PV) to overcome the limits of traditional electric power systems. We performed simulations of a large utility system using hourly solar insolation and load data and attempted to provide up to 50% of this system's energy from PV. We considered several methods to avoid the limits of unusable PV that result at high penetration due to the use of inflexible baseload generators. The enabling technologies considered in this work are increased system flexibility, load shifting via demand responsive appliances, and energy storage

Development and Utilization of Technology on Indian Mango Fruit Processing

Directory of Open Access Journals (Sweden)

Rosenda A. Bronce

2015-11-01

Full Text Available This project aimed to develop and utilize technology on Indian mango fruit processing. Chemical properties of matured unripe and ripe Indian mangoes were determined in terms of total sugar, reducing sugar, starch, titratable acidity and pH. Fermentation parameters investigated in the study were amount of sugar added (20 and 25% fermentation medium, acidity of fermentation medium (addition of 1.33 and 1.66 grams of citric acid for ripe and dilution of water for unripe, degree of ripening of Indian mango fruits (ripe and unripe and ageing period (3 and 4 months. Sixteen treatments were done in triplicates and a composite sample was taken from each treatment for sensory evaluation. Results of the preference test were subjected to statistical analysis. The physicochemical properties of Indian mango wine produced using best fermentation parameters were determined. Appropriate packaging material was selected and packaging design was developed for Indian mango wine. Project cooperators were selected and the technology was transferred through training and production runs. Results of preference test showed that the wine with best sensory properties was prepared using matured unripe Indian mango diluted with water and added with 25% sugar. According to the panel of sensory experts, the taste of Indian mango wine was strong with proper blending of sweetness and sourness, its mouth feel was smooth and good balance, aroma was hot pungent and its color and appearance was clear and light yellow. Its titratable acidity was 0.622%, pH was 5, alcohol content was 11% and brix was 5°.

Building Information Modeling Comprehensive Overview

Directory of Open Access Journals (Sweden)

Sergey Kalinichuk

2015-07-01

Full Text Available The article is addressed to provide a comprehensive review on recently accelerated development of the Information Technology within project market such as industrial, engineering, procurement and construction. Author’s aim is to cover the last decades of the growth of the Information and Communication Technology in construction industry in particular Building Information Modeling and testifies that the problem of a choice of the effective project realization method not only has not lost its urgency, but has also transformed into one of the major condition of the intensive technology development. All of it has created a great impulse on shortening the project duration and has led to the development of various schedule compression techniques what becomes a focus of modern construction.

Development for environmentally friendly and highly efficient energy utilization system in fiscal 1998. Pt. 1. Research on highly efficient and effective energy utilization technology (Research on design technology for optimal system); 1998 nendo kankyo chowagata kokoritsu energy riyo system kaihatsu. 1. Kokoritsu energy yuko riyo gijutsu no kenkyu (saiteki system sekkei gijutsu no kenkyu)

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-05-01

This paper summarizes achievements of the researches during fiscal 1998 on researching a highly efficient and effective energy utilization technology. With regard to technologies to recover and convert unutilized energies, a process simulator was developed, basic internal structure was discussed by experiments and simulation, and substance migrating and heat exchanging characteristics were identified by using partial testing devices. These researches and developments were performed for the waste heat reforming and recovering systems used in chemical plants. In developing a thermoelectric generation system using low calorie exhaust gases, thermoelectric power generating materials were developed, a powder manufacturing technology was developed, a thermoelectric conversion element bulking technology was developed, a thermoelectric power generation system using porous structures was simulated, development and concept design were carried out on system element technologies. In the research and development of the thermoelectric generation system using low calorie exhaust gases, advanced materials and modules were manufactured, the modules were evaluated, and power generation systems were researched. In addition, researches were performed on energy transportation, supply and utilization technologies, and on environmental load reducing technologies. (NEDO)

Advanced Reactor Technology Options for Utilization and Transmutation of Actinides in Spent Nuclear Fuel

International Nuclear Information System (INIS)

2009-09-01

Renewed interest in the potential of nuclear energy to contribute to a sustainable worldwide energy mix is strengthening the IAEA's statutory role in fostering the peaceful uses of nuclear energy, in particular the need for effective exchanges of information and collaborative research and technology development among Member States on advanced nuclear power technologies (Articles III-A.1 and III-A.3). The major challenges facing the long term development of nuclear energy as a part of the world's energy mix are improvement of the economic competitiveness, meeting increasingly stringent safety requirements, adhering to the criteria of sustainable development, and public acceptability. The concern linked to the long life of many of the radioisotopes generated from fission has led to increased R and D efforts to develop a technology aimed at reducing the amount of long lived radioactive waste through transmutation in fission reactors or accelerator driven hybrids. In recent years, in various countries and at an international level, more and more studies have been carried out on advanced and innovative waste management strategies (i.e. actinide separation and elimination). Within the framework of the Project on Technology Advances in Fast Reactors and Accelerator Driven Systems (http://www.iaea.org/inisnkm/nkm/aws/fnss/index.html), the IAEA initiated a number of activities on utilization of plutonium and transmutation of long lived radioactive waste, accelerator driven systems, thorium fuel options, innovative nuclear reactors and fuel cycles, non-conventional nuclear energy systems, and fusion/fission hybrids. These activities are implemented under the guidance and with the support of the IAEA Nuclear Energy Department's Technical Working Group on Fast Reactors (TWG-FR). This publication compiles the analyses and findings of the Coordinated Research Project (CRP) on Studies of Advanced Reactor Technology Options for Effective Incineration of Radioactive Waste (2002

Comprehensive Stuttering Treatment for Adolescents: A Case Study.

Science.gov (United States)

Coleman, Craig E

2018-01-09

This article will focus on a hypothetical case study to highlight comprehensive assessment and treatment for adolescent children who stutter. Assessment and treatment are laid out with a literature review utilizing the components of the International Classification of Functioning, Disability and Health model. Specific assessment and treatment strategies and approaches are discussed. Using the International Classification of Functioning, Disability and Health model can help guide clinicians through the assessment and treatment process to ensure that all areas of stuttering are considered. Comprehensive assessment and treatment helps clinicians address all relevant elements of a stuttering disorder, rather than focusing exclusively on reducing speech disruptions.

Photon technology. Hard photon technology; Photon technology. Hard photon gijutsu

Energy Technology Data Exchange (ETDEWEB)

NONE

1996-03-01

Research results of hard photon technology have been summarized as a part of novel technology development highly utilizing the quantum nature of photon. Hard photon technology refers to photon beam technologies which use photon in the 0.1 to 200 nm wavelength region. Hard photon has not been used in industry due to the lack of suitable photon sources and optical devices. However, hard photon in this wavelength region is expected to bring about innovations in such areas as ultrafine processing and material synthesis due to its atom selective reaction, inner shell excitation reaction, and spatially high resolution. Then, technological themes and possibility have been surveyed. Although there are principle proposes and their verification of individual technologies for the technologies of hard photon generation, regulation and utilization, they are still far from the practical applications. For the photon source technology, the laser diode pumped driver laser technology, laser plasma photon source technology, synchrotron radiation photon source technology, and vacuum ultraviolet photon source technology are presented. For the optical device technology, the multi-layer film technology for beam mirrors and the non-spherical lens processing technology are introduced. Also are described the reduction lithography technology, hard photon excitation process, and methods of analysis and measurement. 430 refs., 165 figs., 23 tabs.

Comprehensive Analysis of Trends and Emerging Technologies in All Types of Fuel Cells Based on a Computational Method

Directory of Open Access Journals (Sweden)

Takaya Ogawa

2018-02-01

Full Text Available Fuel cells have been attracting significant attention recently as highly efficient and eco-friendly energy generators. Here, we have comprehensively reviewed all types of fuel cells using computational analysis based on a citation network that detects emerging technologies objectively and provides interdisciplinary data to compare trends. This comparison shows that the technologies of solid oxide fuel cells (SOFCs and electrolytes in polymer electrolyte fuel cells (PEFCs are at the mature stage, whereas those of biofuel cells (BFCs and catalysts in PEFCs are currently garnering attention. It does not mean, however, that the challenges of SOFCs and PEFC electrolytes have been overcome. SOFCs need to be operated at lower temperatures, approximately 500 °C. Electrolytes in PEFCs still suffer from a severe decrease in proton conductivity at low relative humidity and from their high cost. Catalysts in PEFCs are becoming attractive as means to reduce the platinum catalyst cost. The emerging technologies in PEFC catalysts are mainly heteroatom-doped graphene/carbon nanotubes for metal-free catalysts and supports for iron- or cobalt-based catalysts. BFCs have also received attention for wastewater treatment and as miniaturized energy sources. Of particular interest in BFCs are membrane reactors in microbial fuel cells and membrane-less enzymatic biofuel cells.

Classroom Simulation to Prepare Teachers to Use Evidence-Based Comprehension Practices

Science.gov (United States)

Ely, Emily; Alves, Kat D.; Dolenc, Nathan R.; Sebolt, Stephanie; Walton, Emily A.

2018-01-01

Reading comprehension is an area of weakness for many students, including those with disabilities. Innovative technology methods may play a role in improving teacher readiness to use evidence-based comprehension practices for all students. In this experimental study, researchers examined a classroom simulation (TLE TeachLivE™) to improve…

COMPREHENSIVE DIAGNOSTIC AND IMPROVEMENT TOOLS FOR HVAC-SYSTEM INSTALLATIONS IN LIGHT COMMERCIAL BUILDINGS

Energy Technology Data Exchange (ETDEWEB)

Abram Conant; Mark Modera; Joe Pira; John Proctor; Mike Gebbie

2004-10-31

Proctor Engineering Group, Ltd. (PEG) and Carrier-Aeroseal LLP performed an investigation of opportunities for improving air conditioning and heating system performance in existing light commercial buildings. Comprehensive diagnostic and improvement tools were created to address equipment performance parameters (including airflow, refrigerant charge, and economizer operation), duct-system performance (including duct leakage, zonal flows and thermal-energy delivery), and combustion appliance safety within these buildings. This investigation, sponsored by the National Energy Technology Laboratory, a division of the U.S. Department of Energy, involved collaboration between PEG and Aeroseal in order to refine three technologies previously developed for the residential market: (1) an aerosol-based duct sealing technology that allows the ducts to be sealed remotely (i.e., without removing the ceiling tiles), (2) a computer-driven diagnostic and improvement-tracking tool for residential duct installations, and (3) an integrated diagnosis verification and customer satisfaction system utilizing a combined computer/human expert system for HVAC performance. Prior to this work the aerosol-sealing technology was virtually untested in the light commercial sector--mostly because the savings potential and practicality of this or any other type of duct sealing had not been documented. Based upon the field experiences of PEG and Aeroseal, the overall product was tailored to suit the skill sets of typical HVAC-contractor personnel.

The development of uranium foil farication technology utilizing twin roll method for Mo-99 irradiation target

CERN Document Server

Kim, C K; Park, H D

2002-01-01

MDS Nordion in Canada, occupying about 75% of global supply of Mo-99 isotope, has provided the irradiation target of Mo-99 using the rod-type UAl sub x alloys with HEU(High Enrichment Uranium). ANL (Argonne National Laboratory) through co-operation with BATAN in Indonesia, leading RERTR (Reduced Enrichment for Research and Test Reactors) program substantially for nuclear non-proliferation, has designed and fabricated the annular cylinder of uranium targets, and successfully performed irradiation test, in order to develop the fabrication technology of fission Mo-99 using LEU(Low Enrichment Uranium). As the uranium foils could be fabricated in laboratory scale, not in commercialized scale by hot rolling method due to significant problems in foil quality, productivity and economic efficiency, attention has shifted to the development of new technology. Under these circumstances, the invention of uranium foil fabrication technology utilizing twin-roll casting method in KAERI is found to be able to fabricate LEU or...

Combining communication technology utilization and organizational innovation: evidence from Canadian healthcare decision makers.

Science.gov (United States)

Jbilou, Jalila; Landry, Réjean; Amara, Nabil; El Adlouni, Salaheddine

2009-08-01

Information and Communication Technology (ICT) and Organizational Innovation (OI) are seen as the miracle of post-modernity in organizations. In this way, they are supposed to resolve most organizational problems, efficiently and rapidly. OI is highly dependent on the capacity and the investment in knowledge management (internal and external) to support decision making process and to implement significant changes. We know what explains ICT utilization (ICTU) and what determines OI development (OID) in healthcare services. Moreover, the literature tends to link ICTU to OID and vice versa. However, this dependency has never been explored empirically through the lens of roles combination. To identify the existing combined roles profiles of ICTU and OID among healthcare decision makers and determine factors of the shift from a profile to another. We did the following: (1) a structured review of the literature on healthcare management by focusing on ICTU and OID which allowed us to build two indexes and a comprehensive framework; (2) a copula methodology to identify with high precision the thresholds for ICTU and OID; and (3) a cross-sectional study based on a survey done with a sample of 942 decision makers from Canadian healthcare organizations through a multinomial logit model to identify determinants of the shift. ICTU and OID are correlated at 22% (Kendal's Tau). The joint distribution (combination) of ICTU and OID shows that four major profiles exist among decision makers in Canadian healthcare organizations: the traditional decision maker, the innovative decision maker, the technologic decision maker and the contemporary decision maker. We found out that classic factors act as barriers to the shift from one profile to the desired profile (from 1 to 4, from 2 to 4 and from 3 to 4). We have identified that the attitude toward research and relational capital are transversal barriers of shift. We have also found that some factors have a specific impact such as

Utility portfolio diversification

International Nuclear Information System (INIS)

Griffes, P.H.

1990-01-01

This paper discusses portfolio analysis as a method to evaluate utility supply decisions. Specifically a utility is assumed to increase the value of its portfolio of assets whenever it invests in a new supply technology. This increase in value occurs because the new asset either enhances the return or diversifies the risks of the firm's portfolio of assets. This evaluation method is applied to two supply innovations in the electric utility industry: jointly-owned generating plants and supply contracts with independent power producers (IPPs)

Sustainability assessment of electricity generation technologies using weighted multi-criteria decision analysis

International Nuclear Information System (INIS)

Maxim, Alexandru

2014-01-01

Solving the issue of environmental degradation due to the expansion of the World's energy demand requires a balanced approach. The aim of this paper is to comprehensively rank a large number of electricity generation technologies based on their compatibility with the sustainable development of the industry. The study is based on a set of 10 sustainability indicators which provide a life cycle analysis of the plants. The technologies are ranked using a weighted sum multi-attribute utility method. The indicator weights were established through a survey of 62 academics from the fields of energy and environmental science. Our results show that large hydroelectric projects are the most sustainable technology type, followed by small hydro, onshore wind and solar photovoltaic. We argue that political leaders should have a more structured and strategic approach in implementing sustainable energy policies and this type of research can provide arguments to support such decisions. - Highlights: • We rank 13 electricity generation technologies based on sustainability. • We use 10 indicators in a weighted sum multi-attribute utility approach. • Weights are calculated based on a survey of 62 academics from the field. • Large hydroelectric projects are ranked as the most sustainable. • Decision makers can use the results to promote a more sustainable energy industry

Communication technologies to improve HPV vaccination initiation and completion: A systematic review.

Science.gov (United States)

Francis, Diane B; Cates, Joan R; Wagner, Kyla P Garrett; Zola, Tracey; Fitter, Jenny E; Coyne-Beasley, Tamera

2017-07-01

This systematic review examines the effectiveness of communication technology interventions on HPV vaccination initiation and completion. A comprehensive search strategy was used to identify existing randomized controlled trials testing the impact of computer-, mobile- or internet-based interventions on receipt of any dose of the HPV vaccine. Twelve relevant studies were identified with a total of 38,945 participants. The interventions were delivered using several different methods, including electronic health record (i.e. recall/reminder) prompts, text messaging, automated phone calls, interactive computer videos, and email. Vaccine initiation and completion was greater for technology-based studies relative to their control conditions. There is evidence that interventions utilizing communication technologies as their sole or primary mode for HPV vaccination intervention delivery may increase vaccination coverage. Communication technologies hold much promise for the future of HPV vaccination efforts, especially initiatives in practice-based settings. Copyright © 2017 Elsevier B.V. All rights reserved.

Naval Undersea Warfare Center Division Newport utilities metering, Phase 1

Energy Technology Data Exchange (ETDEWEB)

Carroll, D.M.

1992-11-01

Pacific Northwest Laboratory developed this report for the US Navy`s Naval Undersea Warfare Center Division Newport, Rhode Island (NUWC). The purpose of the report was to review options for metering electricity and steam used in the NUWC compound, and to make recommendations to NUWC for implementation under a follow-on project. An additional NUWC concern is a proposed rate change by the servicing utility, Newport Electric, which would make a significant shift from consumption to demand billing, and what effect that rate change would have on the NUWC utility budget. Automated, remote reading meters are available which would allow NUWC to monitor its actual utility consumption and demand for both the entire NUWC compound and by end-use in individual buildings. Technology is available to perform the meter reads and manipulate the data using a personal computer with minimal staff requirement. This is not meant to mislead the reader into assuming that there is no requirement for routine preventive maintenance. All equipment requires routine maintenance to maintain its accuracy. While PNL reviewed the data collected during the site visit, however, it became obvious that significant opportunities exist for reducing the utility costs other than accounting for actual consumption and demand. Unit costs for both steam and electricity are unnecessarily high, and options are presented in this report for reducing them. Additionally, NUWC has an opportunity to undertake a comprehensive energy resource management program to significantly reduce its energy demand, consumption, and costs.

Naval Undersea Warfare Center Division Newport utilities metering, Phase 1

Energy Technology Data Exchange (ETDEWEB)

Carroll, D.M.

1992-11-01

Pacific Northwest Laboratory developed this report for the US Navy's Naval Undersea Warfare Center Division Newport, Rhode Island (NUWC). The purpose of the report was to review options for metering electricity and steam used in the NUWC compound, and to make recommendations to NUWC for implementation under a follow-on project. An additional NUWC concern is a proposed rate change by the servicing utility, Newport Electric, which would make a significant shift from consumption to demand billing, and what effect that rate change would have on the NUWC utility budget. Automated, remote reading meters are available which would allow NUWC to monitor its actual utility consumption and demand for both the entire NUWC compound and by end-use in individual buildings. Technology is available to perform the meter reads and manipulate the data using a personal computer with minimal staff requirement. This is not meant to mislead the reader into assuming that there is no requirement for routine preventive maintenance. All equipment requires routine maintenance to maintain its accuracy. While PNL reviewed the data collected during the site visit, however, it became obvious that significant opportunities exist for reducing the utility costs other than accounting for actual consumption and demand. Unit costs for both steam and electricity are unnecessarily high, and options are presented in this report for reducing them. Additionally, NUWC has an opportunity to undertake a comprehensive energy resource management program to significantly reduce its energy demand, consumption, and costs.

Near Real-Time Nondestructive Active Inspection Technologies Utilizing Delayed γ-Rays and Neutrons for Advanced Safeguards

International Nuclear Information System (INIS)

Hunt, Alan; Tobin, S. J.

2015-01-01

In this two year project, the research team investigated how delayed γ-rays from short-lived fission fragments detected in the short interval between irradiating pulses can be exploited for advanced safeguards technologies. This program contained experimental and modeling efforts. The experimental effort measured the emitted spectra, time histories and correlations of the delayed γ-rays from aqueous solutions and solid targets containing fissionable isotopes. The modeling effort first developed and benchmarked a hybrid Monte Carlo simulation technique based on these experiments. The benchmarked simulations were then extended to other safeguards scenarios, allowing comparisons to other advanced safeguards technologies and to investigate combined techniques. Ultimately, the experiments demonstrated the possible utility of actively induced delayed γ-ray spectroscopy for fissionable material assay.

Near Real-Time Nondestructive Active Inspection Technologies Utilizing Delayed γ-Rays and Neutrons for Advanced Safeguards

Energy Technology Data Exchange (ETDEWEB)

Hunt, Alan [Idaho State Univ., Pocatello, ID (United States). Idaho Accelerator Center, Dept. of Physics; Reedy, E. T.E. [Idaho State Univ., Pocatello, ID (United States). Dept. of Phyics, Idaho Accelerator Center; Mozin, V. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Tobin, S. J. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States). Nuclear Nonproliferation

2015-02-12

In this two year project, the research team investigated how delayed γ-rays from short-lived fission fragments detected in the short interval between irradiating pulses can be exploited for advanced safeguards technologies. This program contained experimental and modeling efforts. The experimental effort measured the emitted spectra, time histories and correlations of the delayed γ-rays from aqueous solutions and solid targets containing fissionable isotopes. The modeling effort first developed and benchmarked a hybrid Monte Carlo simulation technique based on these experiments. The benchmarked simulations were then extended to other safeguards scenarios, allowing comparisons to other advanced safeguards technologies and to investigate combined techniques. Ultimately, the experiments demonstrated the possible utility of actively induced delayed γ-ray spectroscopy for fissionable material assay.

Strategies for the plutonium utilization

International Nuclear Information System (INIS)

Zouain, D.M.; Lima, J.O.V.; Sakamoto, L.H.

1981-11-01

A review of the activities involving plutonium (its recycle, utilization and technological status and perspectives) is done. These informations are useful for an economic viability study for the plutonium utilization in thermal reactors (recycling) and in fast breeders reactor (FBR), trying to collect the major number of informations about these subjects. The initial phase describes the present status and projections of plutonium accumulation and requirements. Then, the technological process are described and some strategies are analyzed. (E.G.) [pt

Greater-Than-Class C low-level radioactive waste treatment technology evaluation

International Nuclear Information System (INIS)

Garrison, T.W.; Fischer, D.K.

1993-01-01

This report was developed to provide the Greater-Than-Class C Low-Level Radioactive Waste Management Program with criteria and a methodology to select candidate treatment technologies for Greater-Than-Class C low-level radioactive waste (GTCC LLW) destined for dedicated storage and ultimately disposal. The technology selection criteria are provided in a Lotus spreadsheet format to allow the methodology to evolve as the GTCC LLW Program evolves. It is recognized that the final disposal facility is not yet defined; thus, the waste acceptance criteria and other facility-specific features are subject to change. The spreadsheet format will allow for these changes a they occur. As additional treatment information becomes available, it can be factored into the analysis. The technology selection criteria were established from program goals, draft waste acceptance criteria for dedicated storage (including applicable regulations), and accepted remedial investigation methods utilized under the Comprehensive Environmental Response, Compensation, and Liability Act. Kepner-Tregoe decisionmaking techniques are used to compare and rank technologies against the criteria

A predictive study of reading comprehension in third-grade Spanish students.

Science.gov (United States)

López-Escribano, Carmen; Elosúa de Juan, María Rosa; Gómez-Veiga, Isabel; García-Madruga, Juan Antonio

2013-01-01

The study of the contribution of language and cognitive skills to reading comprehension is an important goal of current reading research. However, reading comprehension is not easily assessed by a single instrument, as different comprehension tests vary in the type of tasks used and in the cognitive demands required. This study examines the contribution of basic language and cognitive skills (decoding, word recognition, reading speed, verbal and nonverbal intelligence and working memory) to reading comprehension, assessed by two tests utilizing various tasks that require different skill sets in third-grade Spanish-speaking students. Linguistic and cognitive abilities predicted reading comprehension. A measure of reading speed (the reading time of pseudo-words) was the best predictor of reading comprehension when assessed by the PROLEC-R test. However, measures of word recognition (the orthographic choice task) and verbal working memory were the best predictors of reading comprehension when assessed by means of the DARC test. These results show, on the one hand, that reading speed and word recognition are better predictors of Spanish language comprehension than reading accuracy. On the other, the reading comprehension test applied here serves as a critical variable when analyzing and interpreting results regarding this topic.

Examining the Effectiveness of Pre-Reading Strategies on Saudi EFL College Students' Reading Comprehension

Science.gov (United States)

Al Rasheed, Hana S. S.

2014-01-01

Reading comprehension is a key issue in learning English as a foreign language, and it is critical that teachers utilize pre-reading strategies in reading classes in order to help students enhance their comprehension. The present study investigates the effectiveness of two pre-reading strategies on EFL students' performance in reading…

Extent of Information and Communication Technology (ICT) Utilization for Students' Learning in Tertiary Institutions in Ondo State, Nigeria

Science.gov (United States)

Victor, Akinfolarin Akinwale; Bolanle, Rufai Rukayat

2017-01-01

This study investigated the extent of information and communication technology (ICT) utilization for students' learning in Ondo State tertiary institutions. The research design was descriptive survey. The target population comprises of all students in tertiary institutions of learning in Ondo State. A sample of two hundred (200) undergraduate…

Prerequisites for Amplicon Pyrosequencing of Microbial Methanol Utilizers in the Environment

Directory of Open Access Journals (Sweden)

Steffen eKolb

2013-09-01

Full Text Available The commercial availability of next generation sequencing (NGS technologies facilitated the assessment of functional groups of microorganisms in the environment with high coverage, resolution, and reproducibility. Soil methylotrophs were among the first microorganisms in the environment that were assessed with molecular tools, and nowadays, as well with NGS technologies. Studies in the past years re-attracted notice to the pivotal role of methylotrophs in global conversions of methanol, which mainly originates from plants, and is involved in oxidative reactions and ozone formation in the atmosphere. Aerobic methanol utilizers belong to Bacteria, yeasts, Ascomycota, and molds. Numerous bacterial methylotrophs are facultatively aerobic, and also contribute to anaerobic methanol oxidation in the environment, whereas strict anaerobic methanol utilizers belong to methanogens and acetogens. The diversity of enzymes catalyzing the initial oxidation of methanol is considerable, and comprises at least five different enzyme types in aerobes, and one in strict anaerobes. Only the gene of the large subunit of PQQ-dependent methanol dehydrogenase (mxaF has been analyzed by environmental pyrosequencing. To enable a comprehensive assessment of methanol utilizers in the environment, new primers targeting genes of the PQQ MDH in Methylibium (mdh2, of the NAD-dependent MDH (mdh, of the methanol oxidoreductase of Actinobacteria (mdo, of the fungal FAD-dependent alcohol oxidase (mod1, mod2, and homologues, and of the gene of the large subunit of the methanol:corrinoid methyltransferases (mtaC in methanogens and acetogens need to be developed. Combined stable isotope probing of nucleic acids or proteins with amplicon-based NGS are straightforward approaches to reveal insights into functions of certain methylotrophic taxa in the global methanol cycle.

The Utilization of Education Technology in Higher Education

Science.gov (United States)

Brooks, Angela

2017-01-01

With the rise of technology, many educational organizations are scrambling to find ways to incorporate technology into effective learning strategies. Although there is a significant need to equip curriculum with active learning technology objectives, the challenges that are sometimes overlooked lies within faculty perceived barriers and how they…

A Comprehensive Approach for Pectin Chemical and Functional Characterization

DEFF Research Database (Denmark)

de Sousa, António Felipe Gomes Teixeira

In this work, a comprehensive approach for the chemical and functional analysis of pectin was used in order to relate the different extraction conditions used to the polymer structure and the final functional (mainly gelling) properties. A wide range of methods were utilized including chemical an...

Appropriate Technology as Indian Technology.

Science.gov (United States)

Barry, Tom

1979-01-01

Describes the mounting enthusiasm of Indian communities for appropriate technology as an inexpensive means of providing much needed energy and job opportunities. Describes the development of several appropriate technology projects, and the goals and activities of groups involved in utilizing low scale solar technology for economic development on…

Utilizing Authentic Materials on Students' Listening Comprehension: Does It Have Any Influence?

Science.gov (United States)

Dewi, Resti Citra

2018-01-01

The purpose of this study was to investigate the influence of using authentic materials on EFL students' in listening comprehension. The participants of this study was the second year students of Junior High School in Indonesia, 2014/2015 academic year. The population of this study consisted of five parallel classes with the total number of the…

Assessing medical technologies in development; a new paradigm of medical technology assessment

NARCIS (Netherlands)

Hummel, J. Marjan; van Rossum, Wouter; Verkerke, Gijsbertus Jacob; Rakhorst, Gerhard

2000-01-01

Objective: Our study aims to provide a practical contribution to the field of medical technology assessment within a new paradigm. This paradigm indicates the need for more comprehensive technology assessments in the development stage of a new technology. - Method: We introduce a method, based on

Assessing medical technologies in development - A new paradigm of medical technology assessment

NARCIS (Netherlands)

Hummel, MJM; van Rossum, W; Verkerke, GJ; Rakhorst, G

2000-01-01

Objective: Our study aims to provide a practical contribution to the field of medical technology assessment within a new paradigm. This paradigm indicates the need for more comprehensive technology assessments in the development stage of a new technology. Method: We introduce a method, based on

Generative Adversarial Networks Based Heterogeneous Data Integration and Its Application for Intelligent Power Distribution and Utilization

Directory of Open Access Journals (Sweden)

Yuanpeng Tan

2018-01-01

Full Text Available Heterogeneous characteristics of a big data system for intelligent power distribution and utilization have already become more and more prominent, which brings new challenges for the traditional data analysis technologies and restricts the comprehensive management of distribution network assets. In order to solve the problem that heterogeneous data resources of power distribution systems are difficult to be effectively utilized, a novel generative adversarial networks (GANs based heterogeneous data integration method for intelligent power distribution and utilization is proposed. In the proposed method, GANs theory is introduced to expand the distribution of completed data samples. Then, a so-called peak clustering algorithm is proposed to realize the finite open coverage of the expanded sample space, and repair those incomplete samples to eliminate the heterogeneous characteristics. Finally, in order to realize the integration of the heterogeneous data for intelligent power distribution and utilization, the well-trained discriminator model of GANs is employed to check the restored data samples. The simulation experiments verified the validity and stability of the proposed heterogeneous data integration method, which provides a novel perspective for the further data quality management of power distribution systems.

Utilization and efficacy of internet-based eHealth technology in gastroenterology: a systematic review.

Science.gov (United States)

Knowles, Simon R; Mikocka-Walus, Antonina

2014-04-01

While there have been several reviews exploring the outcomes of various eHealth studies, none have been gastroenterology-specific. This paper aims to evaluate the research conducted within gastroenterology which utilizes internet-based eHealth technology to promote physical and psychological well-being. A systematic literature review of internet-based eHealth interventions involving gastroenterological cohorts was conducted. Searched databases included: EbSCOhost Medline, CINAHL, and PsycINFO. Inclusion criteria were studies reporting on eHealth interventions (both to manage mental health problems and somatic symptoms) in gastroenterology, with no time restrictions. Exclusion criteria were non-experimental studies, or studies using only email as primary eHealth method, and studies in language other than English. A total of 17 papers were identified; seven studies evaluated the efficacy of a psychologically oriented intervention (additional two provided follow-up analyses exploring the original published data) and eight studies evaluated disease management programs for patients with either irritable bowel syndrome, inflammatory bowel disease (IBD) or celiac disease. Overall, psychological eHealth interventions were associated with significant reductions in bowel symptoms and improvement in quality of life (QoL) that tended to continue up to 12 months follow up. The eHealth disease management was shown to generally improve QoL, adherence, knowledge about the disease, and reduce healthcare costs in IBD, although the studies were associated with various methodological problems, and thus, this observation should be confirmed in well-designed interventional studies. Based on the evidence to date, eHealth internet-based technology is a promising tool that can be utilized to both promote and enhance gastrointestinal disease management and mental health.

Comprehensive evaluation of impacts of distributed generation integration in distribution network

Science.gov (United States)

Peng, Sujiang; Zhou, Erbiao; Ji, Fengkun; Cao, Xinhui; Liu, Lingshuang; Liu, Zifa; Wang, Xuyang; Cai, Xiaoyu

2018-04-01

All Distributed generation (DG) as the supplement to renewable energy centralized utilization, is becoming the focus of development direction of renewable energy utilization. With the increasing proportion of DG in distribution network, the network power structure, power flow distribution, operation plans and protection are affected to some extent. According to the main impacts of DG, a comprehensive evaluation model of distributed network with DG is proposed in this paper. A comprehensive evaluation index system including 7 aspects, along with their corresponding index calculation method is established for quantitative analysis. The indices under different access capacity of DG in distribution network are calculated based on the IEEE RBTS-Bus 6 system and the evaluation result is calculated by analytic hierarchy process (AHP). The proposed model and method are verified effective and validity through case study.

Technologies for utilization of industrial excess heat: Potentials for energy recovery and CO2 emission reduction

International Nuclear Information System (INIS)

Broberg Viklund, Sarah; Johansson, Maria T.

2014-01-01

Highlights: • Technologies for recovery and use of industrial excess heat were investigated. • Heat harvesting, heat storage, heat utilization, and heat conversion technologies. • Heat recovery potential for Gävleborg County in Sweden was calculated. • Effects on global CO 2 emissions were calculated for future energy market scenarios. - Abstract: Industrial excess heat is a large untapped resource, for which there is potential for external use, which would create benefits for industry and society. Use of excess heat can provide a way to reduce the use of primary energy and to contribute to global CO 2 mitigation. The aim of this paper is to present different measures for the recovery and utilization of industrial excess heat and to investigate how the development of the future energy market can affect which heat utilization measure would contribute the most to global CO 2 emissions mitigation. Excess heat recovery is put into a context by applying some of the excess heat recovery measures to the untapped excess heat potential in Gävleborg County in Sweden. Two different cases for excess heat recovery are studied: heat delivery to a district heating system and heat-driven electricity generation. To investigate the impact of excess heat recovery on global CO 2 emissions, six consistent future energy market scenarios were used. Approximately 0.8 TWh/year of industrial excess heat in Gävleborg County is not used today. The results show that with the proposed recovery measures approximately 91 GWh/year of district heating, or 25 GWh/year of electricity, could be supplied from this heat. Electricity generation would result in reduced global CO 2 emissions in all of the analyzed scenarios, while heat delivery to a DH system based on combined heat and power production from biomass would result in increased global CO 2 emissions when the CO 2 emission charge is low

Comprehensive national energy strategy

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-04-01

This Comprehensive National Energy Strategy sets forth a set of five common sense goals for national energy policy: (1) improve the efficiency of the energy system, (2) ensure against energy disruptions, (3) promote energy production and use in ways that respect health and environmental values, (4) expand future energy choices, and (5) cooperate internationally on global issues. These goals are further elaborated by a series of objectives and strategies to illustrate how the goals will be achieved. Taken together, the goals, objectives, and strategies form a blueprint for the specific programs, projects, initiatives, investments, and other actions that will be developed and undertaken by the Federal Government, with significant emphasis on the importance of the scientific and technological advancements that will allow implementation of this Comprehensive National Energy Strategy. Moreover, the statutory requirement of regular submissions of national energy policy plans ensures that this framework can be modified to reflect evolving conditions, such as better knowledge of our surroundings, changes in energy markets, and advances in technology. This Strategy, then, should be thought of as a living document. Finally, this plan benefited from the comments and suggestions of numerous individuals and organizations, both inside and outside of government. The Summary of Public Comments, located at the end of this document, describes the public participation process and summarizes the comments that were received. 8 figs.

Acceptability and perceived utility of drone technology among emergency medical service responders and incident commanders for mass casualty incident management.

Science.gov (United States)

Hart, Alexander; Chai, Peter R; Griswold, Matthew K; Lai, Jeffrey T; Boyer, Edward W; Broach, John

2017-01-01

This study seeks to understand the acceptability and perceived utility of unmanned aerial vehicle (UAV) technology to Mass Casualty Incidents (MCI) scene management. Qualitative questionnaires regarding the ease of operation, perceived usefulness, and training time to operate UAVs were administered to Emergency Medical Technicians (n = 15). A Single Urban New England Academic Tertiary Care Medical Center. Front-line emergency medical service (EMS) providers and senior EMS personnel in Incident Commander roles. Data from this pilot study indicate that EMS responders are accepting to deploying and operating UAV technology in a disaster scenario. Additionally, they perceived UAV technology as easy to adopt yet impactful in improving MCI scene management.

Fiscal 2000 report on result of development project of marine resources utilization system for energy conservation. Development of marine resources utilization system for energy conservation (Model demonstrative research and basic study); 2000 nendo energy shiyo gorika kaiyo shigen katsuyo system kaihatsu jigyo seika hokokusho. Energy shiyo gorika kaiyo shigen katsuyo system kaihatsu (model jissho kenkyu oyobi kiban kenkyu)

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-05-01

This paper explains the development of marine resources utilization system for energy conservation. The conceptual system is designed to take a large amount of deep sea water of 100 thousand to 1 million tons a day, to utilize it from the viewpoint of energy conservation using its coldness and purity characteristics, to then discharge it to the area of the sea in minimizing the environmental effect as well as obtaining effect such as absorption of carbon dioxide gas through cultivation of phyto-plankton. In pump-up technology, a piping system attaching on sea bed or floating with one or multiple constraints is applicable at present to all sites of geographical and oceanographic conditions. In utilization technology, use of deep-sea water as cooling water at a steam power plant, for example, improves generation efficiency by one point or more. In discharge and environment-related technologies, the research revealed that the deep-sea water from 300 m below releases carbon dioxide gas at surface, while photosynthesis can absorb the gas in the process of using nutrition contained in the deep-sea water; therefore, comprehensive examination is necessary taking energy utilization effect into account. Candidate sites were selected in areas of 200 m depth and within 5 km off-shore, with the optimum system examined at each site. (NEDO)

Nuclear Safety R and D Programs and trend in the U. S. Utility Industry

International Nuclear Information System (INIS)

Kim, Jong Hyun

1992-01-01

First of all, the deterministic approach to safety analysis, which had dominated safety research in the earlier years, has given much ground to probabilistic approach. Secondly, human factors analysis has become an important part of safety research. Third, safety research relevant to reliability, or safety combined with reliability, are gradually taking place of purely safety-oriented or stand-alone safety research. More and more nuclear utilities in the U. S. are integrating safety with reliability. This evolution is in part due to the successful completion of major safety testing and analyses of deterministic nature, and partially due to the utility industry's desire to harvest synergistic nature, and partially due to the utility industry's desire to harvest synergistic results by combining safety with reliability, as the utility industry is more and more concerned about reducing operation and maintenance costs by enhancing reliability while maintaining plant safety. Nuclear safety is a complex and comprehensive concept, defying a simple categorization or interpretation. Thus, research and development in nuclear safety is necessarily diverse, and the program areas and trend presented in this paper are not meant to be all inclusive. For instance, there are some other active areas that were not mentioned, such as seismic risk assessment program and others. Nuclear safety research and development activities have undergone a perceptible shift of emphasis in recent years. They have become more focused and product-oriented. Also, except for the severe accident analysis, the emphasis on prevention and mitigation of accident, rather than analyzing the consequences of accident, is very much in evidence; that is, reliability-based technologies using PIRA methodology, and upgrading of instrumentation and control technologies are in the main stream of activities

The Health Utilities Index (HUI®: concepts, measurement properties and applications

Directory of Open Access Journals (Sweden)

Horsman John

2003-10-01

Full Text Available Abstract This is a review of the Health Utilities Index (HUI® multi-attribute health-status classification systems, and single- and multi-attribute utility scoring systems. HUI refers to both HUI Mark 2 (HUI2 and HUI Mark 3 (HUI3 instruments. The classification systems provide compact but comprehensive frameworks within which to describe health status. The multi-attribute utility functions provide all the information required to calculate single-summary scores of health-related quality of life (HRQL for each health state defined by the classification systems. The use of HUI in clinical studies for a wide variety of conditions in a large number of countries is illustrated. HUI provides comprehensive, reliable, responsive and valid measures of health status and HRQL for subjects in clinical studies. Utility scores of overall HRQL for patients are also used in cost-utility and cost-effectiveness analyses. Population norm data are available from numerous large general population surveys. The widespread use of HUI facilitates the interpretation of results and permits comparisons of disease and treatment outcomes, and comparisons of long-term sequelae at the local, national and international levels.

New technology for improved utilization of the interconnected power system; Ny teknologi for bedre utnyttelse av overfoerings-systemet

Energy Technology Data Exchange (ETDEWEB)

Enger, A.K.

1996-12-31

The present paper deals with methods used for improving the utilization of interconnected power systems. The author discusses new technologies for improvement and safety of power transmission. Main themes covered in this paper are HVDC (High Voltage DC) systems in Norway, possibilities of load management control, other possible/necessary measures in the grid system, and the development and trends. 21 figs.

NASA In-Situ Resource Utilization (ISRU) Technology and Development Project Overview

Science.gov (United States)

Sanders, Gerald B.; Lason, William E.; Sacksteder, Kurt R.; Mclemore, Carole; Johnson, Kenneth

2008-01-01

Since the Vision for Space Exploration (VSE) was released in 2004, NASA, in conjunction with international space agencies, industry, and academia, has continued to define and refine plans for sustained and affordable robotic and human exploration of the Moon and beyond. With the goal of establishing a lunar Outpost on the Moon to extend human presence, pursue scientific activities, use the Moon to prepare for future human missions to Mars, and expand Earth s economic sphere, a change in how space exploration is performed is required. One area that opens up the possibility for the first time of breaking our reliance on Earth supplied consumables and learn to live off the land is In-Situ Resource Utilization (ISRU). ISRU, which involves the extraction and processing of space resources into useful products, can have a substantial impact on mission and architecture concepts. In particular, the ability to make propellants, life support consumables, and fuel cell reagents can significantly reduce the cost, mass, and risk of sustained human activities beyond Earth. However, ISRU is an unproven capability for human lunar exploration and can not be put in the critical path of lunar Outpost success until it has been proven. Therefore, ISRU development and deployment needs to take incremental steps toward the desired end state. To ensure ISRU capabilities are available for pre-Outpost and Outpost deployment by 2020, and mission and architecture planners are confident that ISRU can meet initial and long term mission requirements, the ISRU Project is developing technologies and systems in three critical areas: (1) Regolith Excavation, Handling and Material Transportation; (2) Oxygen Extraction from Regolith; and (3) Volatile Extraction and Resource Prospecting, and in four development stages: (I) Demonstrate feasibility; (II) Evolve system w/ improved technologies; (III) Develop one or more systems to TRL 6 before start of flight development; and (IV) Flight development for

US utility I ampersand C upgrade initiative

International Nuclear Information System (INIS)

Wilkinson, D.

1993-01-01

This paper describes an initiative which is being pursued to address the problems associated with the increasing obsolescence of instrumentation and control (I ampersand C) systems in nuclear power plants. Such efforts will improve safety, availability, and reliability of plant operation. The program presented is a joint plan between EPRI, utilities, and vendors, to bring about the development of technology to meet these needs, to encourage the private sector to develop such technology, and to prove to utilities the value and utility in applying such technology to upgrade their facilities. Part of this plan is demonstration programs where plant-wide sensor and I ampersand C improvements can be implemented, in a documented manner, to provide R ampersand D information on their performance, functionality, and reliability. The intent is to reduce the costs and shorten the learning curve associated with the utilization of modern I ampersand C equipment

Food waste-to-energy conversion technologies: current status and future directions.

Science.gov (United States)

Pham, Thi Phuong Thuy; Kaushik, Rajni; Parshetti, Ganesh K; Mahmood, Russell; Balasubramanian, Rajasekhar

2015-04-01

Food waste represents a significantly fraction of municipal solid waste. Proper management and recycling of huge volumes of food waste are required to reduce its environmental burdens and to minimize risks to human health. Food waste is indeed an untapped resource with great potential for energy production. Utilization of food waste for energy conversion currently represents a challenge due to various reasons. These include its inherent heterogeneously variable compositions, high moisture contents and low calorific value, which constitute an impediment for the development of robust, large scale, and efficient industrial processes. Although a considerable amount of research has been carried out on the conversion of food waste to renewable energy, there is a lack of comprehensive and systematic reviews of the published literature. The present review synthesizes the current knowledge available in the use of technologies for food-waste-to-energy conversion involving biological (e.g. anaerobic digestion and fermentation), thermal and thermochemical technologies (e.g. incineration, pyrolysis, gasification and hydrothermal oxidation). The competitive advantages of these technologies as well as the challenges associated with them are discussed. In addition, the future directions for more effective utilization of food waste for renewable energy generation are suggested from an interdisciplinary perspective. Copyright © 2014 Elsevier Ltd. All rights reserved.

Technology based Education System

DEFF Research Database (Denmark)

Kant Hiran, Kamal; Doshi, Ruchi; Henten, Anders

2016-01-01

Abstract - Education plays a very important role for the development of the country. Education has multiple dimensions from schooling to higher education and research. In all these domains, there is invariably a need for technology based teaching and learning tools are highly demanded in the acad......Abstract - Education plays a very important role for the development of the country. Education has multiple dimensions from schooling to higher education and research. In all these domains, there is invariably a need for technology based teaching and learning tools are highly demanded...... in the academic institutions. Thus, there is a need of comprehensive technology support system to cater the demands of all educational actors. Cloud Computing is one such comprehensive and user-friendly technology support environment that is the need of an hour. Cloud computing is the emerging technology that has...

Utility bill comprehension in the commercial and industrialsector: results of field research

Energy Technology Data Exchange (ETDEWEB)

Payne, Christopher T.

2000-06-02

This paper presents the results of interviews conducted with 44 business people in 10 states to examine the use of the utility bill as an information mechanism for providing businesses with the relationship between energy consumption and cost. Our results indicate that there are significant barriers to the use of the utility bill as an information tool for energy consumers. Furthermore, we found significant variations among respondents in the information desired from the bill, and differences in decision-making criteria for investments aimed at reducing energy consumption and for those aimed at other forms of waste minimization. These results call into question the applicability of standard market theories in the purchase of energy by most businesses.

A Brief Report on the Ethical and Legal Guides For Technology Use in Marriage and Family Therapy.

Science.gov (United States)

Pennington, Michael; Patton, Rikki; Ray, Amber; Katafiasz, Heather

2017-10-01

Marriage and family therapists (MFTs) use ethical codes and state licensure laws/rules as guidelines for best clinical practice. It is important that professional codes reflect the potential exponential use of technology in therapy. However, current standards regarding technology use lack clarity. To explore this gap, a summative content analysis was conducted on state licensure laws/rules and professional ethical codes to find themes and subthemes among the many aspects of therapy in which technology can be utilized. Findings from the content analysis indicated that while there have been efforts by both state and professional organizations to incorporate guidance for technology use in therapy, a clear and comprehensive "roadmap" is still missing. Future scholarship is needed that develops clearer guidelines for therapists. © 2017 American Association for Marriage and Family Therapy.

Clean coal technologies in Japan: technological innovation in the coal industry

Energy Technology Data Exchange (ETDEWEB)

NONE

2006-12-15

This brochure reviews the history clean coal technologies (CCT) in Japan and systematically describes the present state of CCT insofar. The brochure contains three parts. Part 1. CCT classifications; Part 2. CCT overview; and Part 3. Future outlook for CCT. The main section is part 2 which includes 1) technologies for coal resources development; 2) coal-fired power generation technologies - combustion technologies and gasification technologies; 3) iron making and general industry technologies; 4) multi-purpose coal utilization technologies - liquefaction technologies, pyrolysis technologies, powdering, fluidization, and co-utilisation technologies, and de-ashing and reforming technologies; 5) Environmental protection technologies - CO{sub 2} recovery technologies; flue gas treatment and gas cleaning technologies, and technologies to effectively use coal has; 6) basic technologies for advanced coal utilization; and 7) co-production systems.

Evidence of clinical utility: an unmet need in molecular diagnostics for patients with cancer.

Science.gov (United States)

Parkinson, David R; McCormack, Robert T; Keating, Susan M; Gutman, Steven I; Hamilton, Stanley R; Mansfield, Elizabeth A; Piper, Margaret A; Deverka, Patricia; Frueh, Felix W; Jessup, J Milburn; McShane, Lisa M; Tunis, Sean R; Sigman, Caroline C; Kelloff, Gary J

2014-03-15

This article defines and describes best practices for the academic and business community to generate evidence of clinical utility for cancer molecular diagnostic assays. Beyond analytical and clinical validation, successful demonstration of clinical utility involves developing sufficient evidence to demonstrate that a diagnostic test results in an improvement in patient outcomes. This discussion is complementary to theoretical frameworks described in previously published guidance and literature reports by the U.S. Food and Drug Administration, Centers for Disease Control and Prevention, Institute of Medicine, and Center for Medical Technology Policy, among others. These reports are comprehensive and specifically clarify appropriate clinical use, adoption, and payer reimbursement for assay manufacturers, as well as Clinical Laboratory Improvement Amendments-certified laboratories, including those that develop assays (laboratory developed tests). Practical criteria and steps for establishing clinical utility are crucial to subsequent decisions for reimbursement without which high-performing molecular diagnostics will have limited availability to patients with cancer and fail to translate scientific advances into high-quality and cost-effective cancer care. See all articles in this CCR Focus section, "The Precision Medicine Conundrum: Approaches to Companion Diagnostic Co-development." ©2014 AACR.

Saline agriculture: A technology for economic utilization and improvement of saline environments (abstract)

International Nuclear Information System (INIS)

Aslam, Z.; Malik, K.A.; Khurshid, S.J.; Awan, A.R.; Akram, M.; Hashmi, Z.; Ali, Y.; Gulnaz, A.; Hussain, M.; Hussain, F.

2005-01-01

The salinity problem is one of the severe constraints for agriculture in Pakistan. In a socio-economic and salinity and drainage survey over an area of about 25000 acres of salt-affected land recently, crop production is found to be very low. Livestock is underfed and malnourished. Pakistan has spent and allocated over one billion US dollars on Salinity Control and Reclamation Projects (SCARP), of course, with dubious results. Over the years, a Saline Agriculture Technology has been developed as a cheap alternative at NIAB for comfortably living with salinity and to profitably utilize saline land rather than its reclamation. The soil improvement is a fringe benefit in this approach. The Saline Agriculture Technology has been tested at laboratory level, at field stations and at farms of some progressive farmers. Now we are sharing this technology with farming communities through a 'Saline Agriculture Farmer Participatory Development Project in Pakistan', with assistance from the National Rural Support Programme. The new project has been launched simultaneously in all four provinces of Pakistan on 25000 acres of salt-affected land. Under this project seeds of salt tolerant crop varieties wheat, cotton, rice, castor, brassica and barley and saplings of trees/shrubs, e.g. Acacia ampliceps, A. nilotica, Casuarina glauca, ber, jaman, etc selected for development work in various institutions of Pakistan are being provided to farmers. Know-how on new irrigation techniques like bed-and-corrugation and bed-and-furrow, agronomic practices like laser land leveling, planting on beds and in auger holes and soil/water amendment practices (use of gypsum and mineral acids) are being shared with farmers. These interventions are quite efficient, save water up to 40% and enable farmers to utilize bad quality water. In general, farmers are being familiarized with prevalent animal diseases, nutritional problems and prophylactic techniques. They are being helped in developing Saline

The utility target market model

International Nuclear Information System (INIS)

Leng, G.J.; Martin, J.

1994-01-01

A new model (the Utility Target Market Model) is used to evaluate the economic benefits of photovoltaic (PV) power systems located at the electrical utility customer site. These distributed PV demand-side generation systems can be evaluated in a similar manner to other demand-side management technologies. The energy and capacity values of an actual PV system located in the service area of the New England Electrical System (NEES) are the two utility benefits evaluated. The annual stream of energy and capacity benefits calculated for the utility are converted to the installed cost per watt that the utility should be willing to invest to receive this benefit stream. Different discount rates are used to show the sensitivity of the allowable installed cost of the PV systems to a utility's average cost of capital. Capturing both the energy and capacity benefits of these relatively environmentally friendly distributed generators, NEES should be willing to invest in this technology when the installed cost per watt declines to ca $2.40 using NEES' rated cost of capital (8.78%). If a social discount rate of 3% is used, installation should be considered when installed cost approaches $4.70/W. Since recent installations in the Sacramento Municipal Utility District have cost between $7-8/W, cost-effective utility applications of PV are close. 22 refs., 1 fig., 2 tabs

Direct utilization of geothermal energy: a technical handbook

Energy Technology Data Exchange (ETDEWEB)

Anderson, D.N; Lund, J.W. (eds.)

1979-01-01

This technical handbook includes comprehensive discussions on nature and occurrence of the geothermal resource, its development, utilization, economics, financing, and regulation. Information on pricing parameters for the direct use of geothermal energy is included as an appendix. (MRH)

Bridging the Technology Readiness "Valley of Death" Utilizing Nanosats

Science.gov (United States)

Bauer, Robert A.; Millar, Pamela S.; Norton, Charles D.

2015-01-01

Incorporating new technology is a hallmark of space missions. Missions demand ever-improving tools and techniques to allow them to meet the mission science requirements. In Earth Science, these technologies are normally expressed in new instrument capabilities that can enable new measurement concepts, extended capabilities of existing measurement techniques, or totally new detection capabilities, and also, information systems technologies that can enhance data analysis or enable new data analyses to advance modeling and prediction capabilities. Incorporating new technologies has never been easy. There is a large development step beyond demonstration in a laboratory or on an airborne platform to the eventual space environment that is sometimes referred to as the "technology valley of death." Studies have shown that non-validated technology is a primary cause of NASA and DoD mission delays and cost overruns. With the demise of the New Millennium Program within NASA, opportunities for demonstrating technologies in space have been rare. Many technologies are suitable for a flight project after only ground testing. However, some require validation in a relevant or a space flight environment, which cannot be fully tested on the ground or in airborne systems. NASA's Earth Science Technology Program has initiated a nimble program to provide a fairly rapid turn-around of space validated technologies, and thereby reducing future mission risk in incorporating new technologies. The program, called In-Space Validation of Earth Science Technology (InVEST), now has five tasks in development. Each are 3U CubeSats and they are targeted for launch opportunities in the 2016 time period. Prior to formalizing an InVEST program, the technology program office was asked to demonstrate how the program would work and what sort of technologies could benefit from space validation. Three projects were developed and launched, and have demonstrated the technologies that they set out to validate

Excimer Laser Technology

CERN Document Server

Basting, Dirk

2005-01-01

This comprehensive survey on Excimer Lasers investigates the current range of the technology, applications and devices of this commonly used laser source, as well as the future of new technologies, such as F2 laser technology. Additional chapters on optics, devices and laser systems complete this compact handbook. A must read for laser technology students, process application researchers, engineers or anyone interested in excimer laser technology. An effective and understandable introduction to the current and future status of excimer laser technology.

Different Perspectives on Technology Acceptance: The Role of Technology Type and Age

Science.gov (United States)

Arning, Katrin; Ziefle, Martina

Although eHealth technologies offer an enormous potential to improve healthcare, the knowledge about key determinants of acceptance for eHealth technology is restricted. While the underlying technology of eHealth technologies and Information and Communication technology (ICT) is quite similar, utilization contexts and using motives are quite different. In order to explore the role of technology type on acceptance, we contrasted central application characteristics of both technology types using the scenario technique. A questionnaire was administered (n = 104) measuring individual variables (age, gender) and attitudes regarding an eHealth application (blood sugar meter) in contrast to an ICT device (Personal Digital Assistant, PDA). Older users basically approved the utilization of health-related technologies and perceived lower usability barriers. In addition, we identified main utilization motives of eHealth technology and technology-specific acceptance patterns, especially regarding issues of data safety in the eHealth context. Effects of age and gender in acceptance ratings suggest a differential perspective on eHealth acceptance. Finally, practical interventions were derived in order to support eHealth device design and to promote acceptance of eHealth technology.

utilization of sweetpotato based confection technology

African Journals Online (AJOL)

oma

Department of Home Economics/Hotel Management and Tourism ... This paper examines the role of logistics and information technology in tourists systems in .... Peisley T (2000) ―Cruising in Crisis‖ Travel and Tourism Analyst, 2, 1-39.

Associated petroleum gas in Russia: reasons for non-utilization

Energy Technology Data Exchange (ETDEWEB)

Roeland, Tonje Hulbak

2010-10-22

This report studies the factors hindering increased utilization of associated petroleum gas (APG) in Russia. The issue of flaring versus utilization is studied from a Technology Innovation System (TIS) perspective, seeing the non-utilization issue as a problem of technology diffusion. There are many technological options available for APG utilization, but a main blocking mechanism in the Russian case is the Gazprom monopoly on gas transportation via their pipelines. A commonly discussed solution is policy to ensure third party access, but this study finds that this solution holds little potential, as its ramifications are too extensive and unacceptable to the key actor Gazprom. More promising solutions may be found in small, emerging engineering companies. (Author)

Comprehensive comparison of macro-strain mode and displacement mode based on different sensing technologies

Science.gov (United States)

Hong, Wan; Zhang, Jian; Wu, Gang; Wu, Zhishen

2015-01-01

A comprehensive comparison of macro-strain mode and displacement mode obtained from distributed macro-strain sensing and high-density point sensing (such as accelerometers) technologies is presented in this paper. Theoretical derivation reveals that displacement mode shape from accelerometers and modal macro-strain from distributed macro-strain sensors can be converted into each other. However, it is realized that displacement mode shape as global behavior of a structure can still be calculated with high-precision from modal macro-strain considering measurement errors in practical monitoring, whereas modal macro-strain can hardly be accurately achieved from displacement mode shape when signals are corrupted with noise in practical monitoring. Simulation and experiment results show that the calculated displacement mode shapes are very close to the actual ones even if the noise level reaches 5%. Meanwhile, damage index using measured modal macro-strain is still effective when the measurements are corrupted with 5% noise which is reliable for damage detection in practical monitoring. Calculating modal macro-strain from noise-polluted displacement mode shape will cause an unacceptable error if the noise level reaches only 0.5%, which has been verified in the simulation.

Mental juggling: when does multitasking impair reading comprehension?

Science.gov (United States)

Cho, Kit W; Altarriba, Jeanette; Popiel, Maximilian

2015-01-01

The present study investigated the conditions under which multitasking impairs reading comprehension. Participants read prose passages (the primary task), some of which required them to perform a secondary task. In Experiment 1, we compared two different types of secondary tasks (answering trivia questions and solving math problems). Reading comprehension was assessed using a multiple-choice test that measured both factual and conceptual knowledge. The results showed no observable detrimental effects associated with multitasking. In Experiment 2, the secondary task was a cognitive load task that required participants to remember a string of numbers while reading the passages. Performance on the reading comprehension test was lower in the cognitive load conditions relative to the no-load condition. The present study delineates the conditions under which multitasking can impair or have no effect on reading comprehension. These results further our understanding of our capacity to multitask and have practical implications in our technologically advanced society in which multitasking has become commonplace.

utilization of sweetpotato based confection technology

African Journals Online (AJOL)

oma

by farmers in the production of sweet potato were organic and inorganic fertilizer while the technologies ..... fertilizer essentially due to scarcity and high cost, and the small percentage of farmers that .... (CIP), Lima, peru, Database (on-line).

Reactor technology assessment and selection utilizing systems engineering approach

Science.gov (United States)

Zolkaffly, Muhammed Zulfakar; Han, Ki-In

2014-02-01

The first Nuclear power plant (NPP) deployment in a country is a complex process that needs to consider technical, economic and financial aspects along with other aspects like public acceptance. Increased interest in the deployment of new NPPs, both among newcomer countries and those with expanding programs, necessitates the selection of reactor technology among commercially available technologies. This paper reviews the Systems Decision Process (SDP) of Systems Engineering and applies it in selecting the most appropriate reactor technology for the deployment in Malaysia. The integrated qualitative and quantitative analyses employed in the SDP are explored to perform reactor technology assessment and to select the most feasible technology whose design has also to comply with the IAEA standard requirements and other relevant requirements that have been established in this study. A quick Malaysian case study result suggests that the country reside with PWR (pressurized water reactor) technologies with more detailed study to be performed in the future for the selection of the most appropriate reactor technology for Malaysia. The demonstrated technology assessment also proposes an alternative method to systematically and quantitatively select the most appropriate reactor technology.

Pollution Prevention Program: Technology summary

International Nuclear Information System (INIS)

1994-02-01

The Department of Energy (DOE) has established a national Research, Development, Demonstration, Testing, and Evaluation (RDDT ampersand E) Program for pollution prevention and waste minimization at its production plants During FY89/90 the Office of Environmental Restoration and Waste Management (EM), through the Office of Technology Development (OTD), established comprehensive, pollution prevention technical support programs to demonstrate new, environmentally-conscious technology for production processes. The RDDT ampersand E program now entails collaborative efforts across DOE. The Pollution Prevention Program is currently supporting three major activities: The DOE/US Air Force Memorandum of Understanding Program is a collaborative effort to utilize the combined resources of DOE and the Department of Defense, eliminate duplication of effort in developing technologies, and to facilitate technology solutions aimed at reducing waste through process modification, material substitution or recycling. The Waste Component Recycle, Treatment and Disposal Integrated Demonstration (WeDID) will develop recycle, treatment, and disposal processes and associated technologies for use in the dismantlement of non-nuclear weapons components, to support US arms treaties and policies. This program will focus on meeting all security and regulatory requirements (with additional benefit to the commercial electronics industry). The Environmentally Conscious Manufacturing Integrated Demonstration (ECMID) will effectively implement ECM technologies that address both the needs of the DOE Complex and US electronics industry, and encourage strong interaction between DOE and US industry. The ECMID will also develop life cycle analysis tools that will aid decisionmakers in selecting the optimum process based on the tradeoffs between cost an environmental impact

Optimising Comprehensibility in Interlingual Translation

DEFF Research Database (Denmark)

Nisbeth Jensen, Matilde

2015-01-01

The increasing demand for citizen engagement in areas traditionally belonging exclusively to experts, such as health, law and technology has given rise to the necessity of making expert knowledge available to the general public through genres such as instruction manuals for consumer goods, patien...... the functional text type of Patient Information Leaflet. Finally, the usefulness of applying the principles of Plain Language and intralingual translation for optimising comprehensibility in interlingual translation is discussed....

Augmented Reality Game-Based Learning: Enriching Students' Experience during Reading Comprehension Activities

Science.gov (United States)

Tobar-Muñoz, Hendrys; Baldiris, Silvia; Fabregat, Ramon

2017-01-01

Program for International Student Assessment results indicate that while reading comprehension needs to be promoted, teachers are struggling to find ways to motivate students to do reading comprehension activities and although technology-enhanced learning approaches are entering the classroom, researchers are still experimenting with them to…

Comprehensive care programs for patients with multiple chronic conditions: a systematic literature review.

Science.gov (United States)

de Bruin, Simone R; Versnel, Nathalie; Lemmens, Lidwien C; Molema, Claudia C M; Schellevis, François G; Nijpels, Giel; Baan, Caroline A

2012-10-01

To provide insight into the characteristics of comprehensive care programs for patients with multiple chronic conditions and their impact on patients, informal caregivers, and professional caregivers. Systematic literature search in multiple electronic databases for English language papers published between January 1995 and January 2011, supplemented by reference tracking and a manual search on the internet. Wagner's chronic care model (CCM) was used to define comprehensive care. After inclusion, the methodological quality of each study was assessed. A best-evidence synthesis was applied to draw conclusions. Forty-two publications were selected describing thirty-three studies evaluating twenty-eight comprehensive care programs for multimorbid patients. Programs varied in the target patient groups, implementation settings, number of included interventions, and number of CCM components to which these interventions related. Moderate evidence was found for a beneficial effect of comprehensive care on inpatient healthcare utilization and healthcare costs, health behavior of patients, perceived quality of care, and satisfaction of patients and caregivers. Insufficient evidence was found for a beneficial effect of comprehensive care on health-related quality of life in terms of mental functioning, medication use, and outpatient healthcare utilization and healthcare costs. No evidence was found for a beneficial effect of comprehensive care on cognitive functioning, depressive symptoms, functional status, mortality, quality of life in terms of physical functioning, and caregiver burden. Because of the heterogeneity of comprehensive care programs, it is as yet too early to draw firm conclusions regarding their effectiveness. More rigorous evaluation studies are necessary to determine what constitutes best care for the increasing number of people with multiple chronic conditions. Copyright © 2012 Elsevier Ireland Ltd. All rights reserved.

Conceptual and Empirical Themes regarding the Design of Technology Transfer Programs: A Review of Wood Utilization Research in the United States

Directory of Open Access Journals (Sweden)

Paul V. Ellefson

2011-01-01

Full Text Available Transfer of technologies produced by research is critical to innovation within all organizations. The intent of this paper is to take stock of the conceptual underpinnings of technology transfer processes as they relate to wood utilization research and to identify conditions that promote the successful transfer of research results. Conceptually, research utilization can be viewed from multiple perspectives, including the haphazard diffusion of knowledge in response to vague and imprecise demands for information, scanning of multiple information sources by individuals and organizations searching for useful scientific knowledge, engagement of third parties to organize research results and communicate them to potential users, and ongoing and active collaboration between researchers and potential users of research. Empirical evidence suggests that various types of programs can promote technology transfer (venture capital, angel investors, business incubators, extension services, tax incentives, and in-house entities, the fundamental effectiveness of which depends on research results that are scientifically valid and consistent with the information needs of potential users. Furthermore, evidence suggests preference toward programs that are appropriately organized and governed, suitably led and creatively administered, and periodically evaluated in accordance with clear standards of success.

Could a multimodal dictionary serve as a learning tool? An examination of the impact of technologically enhanced visual glosses on L2 text comprehension

Directory of Open Access Journals (Sweden)

Takeshi Sato

2016-09-01

Full Text Available This study examines the efficacy of a multimodal online bilingual dictionary based on cognitive linguistics in order to explore the advantages and limitations of explicit multimodal L2 vocabulary learning. Previous studies have examined the efficacy of the verbal and visual representation of words while reading L2 texts, concluding that it facilitates incidental word retention. This study explores other potentials of multimodal L2 vocabulary learning: explicit learning with a multimodal dictionary could enhance not only word retention, but also text comprehension; the dictionary could serve not only as a reference tool, but also as a learning tool; and technology-enhanced visual glosses could facilitate deeper text comprehension. To verify these claims, this study investigates the multimodal representations’ effects on Japanese students learning L2 locative prepositions by developing two online dictionaries, one with static pictures and one with animations. The findings show the advantage of such dictionaries in explicit learning; however, no significant differences are found between the two types of visual glosses, either in the vocabulary or in the listening tests. This study confirms the effectiveness of multimodal L2 materials, but also emphasizes the need for further research into making the technologically enhanced materials more effective.

A comprehensive review of dynamic voltage restorers

DEFF Research Database (Denmark)

Farhadi-Kangarlu, Mohammad; Babaei, Ebrahim; Blaabjerg, Frede

2017-01-01

has been done in the field of DVR and the field is rather mature now. But, a survey on the published papers showed that there is not any published paper that reviews the DVR technology. This paper tends to provide a comprehensive review on the DVR topologies, control strategies and applications. We...

International nuclear technology transfer

International Nuclear Information System (INIS)

Cartwright, P.; Rocchio, J.P.

1978-01-01

Light water reactors (LWRs), originally developed in the United States, became the nuclear workhorses for utilities in Europe and Japan largely because the U.S. industry was willing and able to transfer its nuclear know-how abroad. In this international effort, the industry had the encouragement and support of the U.S. governement. In the case of the boiling water reactor (BWR) the program for technology transfer was developed in response to overseas customer demands for support in building local designs and manufacturing capabilities. The principal vehicles have been technology exchange agreements through which complete engineering and manufacturing information is furnished covering BWR systems and fuel. Agreements are held with companies in Germany, Japan, Italy, and Sweden. In recent years, a comprehensive program of joint technology development with overseas manufacturers has begun. The rapidly escalating cost of nuclear research and development make it desirable to minimize duplication of effort. These joint programs provide a mechanism for two or more parties jointly to plan a development program, assign work tasks among themselves, and exchange test results. Despite a slower-than-hoped-for start, nuclear power today is playing a significant role in the economic growth of some developing countries, and can continue to do so. Roughly half of the 23 free world nations that have adopted LWRs are developing countries

Racial and ethnic minority enrollment in randomized clinical trials of behavioural weight loss utilizing technology: a systematic review.

Science.gov (United States)

Rosenbaum, D L; Piers, A D; Schumacher, L M; Kase, C A; Butryn, M L

2017-07-01

Many racial and ethnic minority groups (minorities) are disproportionately affected by overweight and obesity; however, minorities are often under-represented in clinical trials of behavioural weight loss (BWL) treatment, potentially limiting the generalizability of these trials' conclusions. Interventions involving technology may be particularly well suited to overcoming the barriers to minority enrollment in BWL trials, such as demanding or unpredictable work schedules, caregiving responsibilities and travel burdens. Thus, this systematic review aimed to describe minority enrollment in trials utilizing technology in interventions, as well as to identify which form(s) of technology yield the highest minority enrollment. Results indicated relatively low enrollment of minorities. Trials integrating smartphone use exhibited significantly greater racial minority enrollment than trials that did not; trials with both smartphone and in-person components exhibited the highest racial minority enrollment. This review is the first to explore how the inclusion of technology in BWL trials relates to minority enrollment and can help address the need to improve minority enrollment in weight loss research. © 2017 World Obesity Federation.

More comprehensive discussion of CRC screening associated with higher screening.

Science.gov (United States)

Mosen, David M; Feldstein, Adrianne C; Perrin, Nancy A; Rosales, A Gabriella; Smith, David H; Liles, Elizabeth G; Schneider, Jennifer L; Meyers, Ronald E; Elston-Lafata, Jennifer

2013-04-01

Examine association of comprehensiveness of colorectal cancer (CRC) screening discussion by primary care physicians (PCPs) with completion of CRC screening. Observational study in Kaiser Permanente Northwest, a group-model health maintenance organization. A total of 883 participants overdue for CRC screening received an automated telephone call (ATC) between April and June 2009 encouraging CRC screening. Between January and March 2010, participants completed a survey on PCPs' discussion of CRC screening and patient beliefs regarding screening. receipt of CRC screening (assessed by electronic medical record [EMR], 9 months after ATC). Primary independent variable: comprehensiveness of CRC screening discussion by PCPs (7-item scale). Secondary independent variables: perceived benefits of screening (4-item scale assessing respondents' agreement with benefits of timely screening) and primary care utilization (EMR; 9 months after ATC). The independent association of variables with CRC screening was assessed with logistic regression. Average scores for comprehensiveness of CRC discussion and perceived benefits were 0.4 (range 0-1) and 4.0 (range 1-5), respectively. A total of 28.2% (n = 249) completed screening, 84% of whom had survey assessments after their screening date. Of screeners, 95.2% completed the fecal immunochemical test. More comprehensive discussion of CRC screening was associated with increased screening (odds ratio [OR] = 1.51, 95% confidence interval [CI] = 1.03-2.21). Higher perceived benefits (OR = 1.46, 95% CI = 1.13-1.90) and 1 or more PCP visits (OR = 5.82, 95% CI = 3.87-8.74) were also associated with increased screening. More comprehensive discussion of CRC screening was independently associated with increased CRC screening. Primary care utilization was even more strongly associated with CRC screening, irrespective of discussion of CRC screening.

A Review on Development Practice of Smart Grid Technology in China

Science.gov (United States)

Han, Liu; Chen, Wei; Zhuang, Bo; Shen, Hongming

2017-05-01

Smart grid has become an inexorable trend of energy and economy development worldwide. Since the development of smart grid was put forward in China in 2009, we have obtained abundant research results and practical experiences as well as extensive attention from international community in this field. This paper reviews the key technologies and demonstration projects on new energy connection forecasts; energy storage; smart substations; disaster prevention and reduction for power transmission lines; flexible DC transmission; distribution automation; distributed generation access and micro grid; smart power consumption; the comprehensive demonstration of power distribution and utilization; smart power dispatching and control systems; and the communication networks and information platforms of China, systematically, on the basis of 5 fields, i.e., renewable energy integration, smart power transmission and transformation, smart power distribution and consumption, smart power dispatching and control systems and information and communication platforms. Meanwhile, it also analyzes and compares with the developmental level of similar technologies abroad, providing an outlook on the future development trends of various technologies.

Electrolysis: Information and Opportunities for Electric Power Utilities

Energy Technology Data Exchange (ETDEWEB)

Kroposki, B.; Levene, J.; Harrison, K.; Sen, P.K.; Novachek, F.

2006-09-01

Recent advancements in hydrogen technologies and renewable energy applications show promise for economical near- to mid-term conversion to a hydrogen-based economy. As the use of hydrogen for the electric utility and transportation sectors of the U.S. economy unfolds, electric power utilities need to understand the potential benefits and impacts. This report provides a historical perspective of hydrogen, discusses the process of electrolysis for hydrogen production (especially from solar and wind technologies), and describes the opportunities for electric power utilities.

Mars Oxygen In-Situ Resource Utilization Experiment

Data.gov (United States)

National Aeronautics and Space Administration — The Mars Oxygen In-Situ Resource Utilization Experiment (MOXIE) will be the first in-situ resource utilization (ISRU) technology demonstration on Mars. Competitively...

Solar thermal utilization--an overview

International Nuclear Information System (INIS)

Chen Deming; Xu Gang

2007-01-01

Solar energy is an ideal renewable energy source and its thermal utilization is one of its most important applications. We review the status of solar thermal utilization, including: (1) developed technologies which are already widely used all over the world, such as solar assisted water heaters, solar cookers, solar heated buildings and so on; (2) advanced technologies which are still in the development or laboratory stage and could have more innovative applications, including thermal power generation, refrigeration, hydrogen production, desalination, and chimneys; (3) major problems which need to be resolved for advanced utilizaiton of solar thermal energy. (authors)

A review on technologies for oil shale surface retort

International Nuclear Information System (INIS)

Pan, Y.; Zhang, X.; Liu, S.; Yang, S.A.; Ren, N.

2012-01-01

In recent years, with the shortage of oil resources and the continuous increase in oil prices, oil shale has seized much more attention. Oil shale is a kind of important unconventional oil and gas resources. Oil shale resources are plentiful according to the proven reserves in places. And shale oil is far richer than crude oil in the world. Technology processing can be divided into two categories: surface retorting and in-situ technology. The process and equipment of surface retorting are more mature, and are still up to now, the main way to produce shale oil from oil shale. According to the variations of the particle size, the surface retorting technologies of oil shale can be notified and classified into two categories such as lump shale process and particulate shale process. The lump shale processes introduced in this article include the Fushun retorting technology, the Kiviter technology and the Petrosix technology; the particulate processes include the Gloter technology, the LR technology, the Tosco-II technology, the ATP (Alberta Taciuk Process) technology and the Enefit-280 technology. After the thorough comparison of these technologies, we can notice that, this article aim is to show off that : the particulate process that is environmentally friendly, with its low cost and high economic returns characteristics, will be the major development trend; Combined technologies of surface retorting technology and other oil producing technology should be developed; the comprehensive utilization of oil shale should be considered during the development of surface retorting technology, meanwhile the process should be harmless to the environment. (author)

Report on the results of the FY 1998 hydrogen utilization international clean energy system technology (WE-NET). Subtask 7. Survey/study on hydrogen utilization technology; 1998 nendo suiso riyo kokusai clean energy system (WE-NET). 7. Suiso riyo gijutsu ni kansuru chosa kento

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-03-01

The paper described the results of survey/study of the FY 1998 WE-NET project. In Subtask 7, survey/study have been made on the main hydrogen utilization technologies except the hydrogen combustion gas turbine since FY 1993. Based on the survey results having been obtained, study was made on conditions for introducing promising technology, future prospects, etc. in FY 1998. As to the power generation, the basic combustion test and test on hydrogen injection equipment as element test, and test on ignition equipment were carried out using rapid compression/expansion equipment. A scenario for introducing hydrogen vehicle was made, and at the same time environmental LCA was conducted by which environmental influences can be assessed. The survey of the market of pure hydrogen polymer electrolyte fuel cells were made in terms of the electric utility use, industrial use, residential/commercial use, and movement/vehicle use. Study was conducted on the combined process of oxygen production equipment and He Brayton cycle in the subzero fractionation/low-temperature VSA method. Various methods including performance, price, etc. were surveyed/studied, making it a precondition that hydrogen supply stations are installed in stand-alone distribution near places of consumption. (NEDO)

Health technology funding decision-making processes around the world: the same, yet different.

Science.gov (United States)

Stafinski, Tania; Menon, Devidas; Philippon, Donald J; McCabe, Christopher

2011-06-01

All healthcare systems routinely make resource allocation decisions that trade off potential health gains to different patient populations. However, when such trade-offs relate to the introduction of new, promising health technologies, perceived 'winners' and 'losers' are more apparent. In recent years, public scrutiny over such decisions has intensified, raising the need to better understand how they are currently made and how they might be improved. The objective of this paper is to critically review and compare current processes for making health technology funding decisions at the regional, state/provincial and national level in 20 countries. A comprehensive search for published, peer-reviewed and grey literature describing actual national, state/provincial and regional/institutional technology decision-making processes was conducted. Information was extracted by two independent reviewers and tabulated to facilitate qualitative comparative analyses. To identify strengths and weaknesses of processes identified, websites of corresponding organizations were searched for commissioned reviews/evaluations, which were subsequently analysed using standard qualitative methods. A total of 21 national, four provincial/state and six regional/institutional-level processes were found. Although information on each one varied, they could be grouped into four sequential categories: (i) identification of the decision problem; (ii) information inputs; (iii) elements of the decision-making process; and (iv) public accountability and decision implementation. While information requirements of all processes appeared substantial and decision-making factors comprehensive, the way in which they were utilized was often unclear, as were approaches used to incorporate social values or equity arguments into decisions. A comprehensive inventory of approaches to implementing the four main components of all technology funding decision-making processes was compiled, from which areas for future

Availability and utilization of information communication technology ...

African Journals Online (AJOL)

The use of ICT in learning is critical in development of any society. Today's learning has emphasized its importance as basis for 21st century knowledge acquisition. This study investigated the availability and utilization of ICT facilities in Madonna University, Nigeria with particular reference to the Okija campus. It employed ...

Prospective utility of therapeutic ultrasound in dentistry-Review with recent comprehensive update

Directory of Open Access Journals (Sweden)

Shalu Rai

2012-01-01

Full Text Available Background: The utility of ultrasound (US for therapeutic purposes is still in its infancy. Therapeutic US (TUS has been used widely in medical field for urological application, surgical intervention, bone healing, and osteointegration in cancer and healing of full thickness excised skin lesions, and within dentistry as a prediagnostic, diagnostic and therapeutic purpose. The purpose of the paper is to review and determine the efficacy of US as one of the treatment modalities for its role in maxillofacial region to reduce pain and promote soft tissue healing. Materials and Methods: A Medline search included of the international literature published between 1976 and 2011 and was restricted to English language articles, published work of past researchers including in vitro and in vivo studies, recent additions of textbooks on surgical and therapeutic applications of US and, current articles in conference papers and reports accessed from the internet using Google search engine on therapeutic ultrasound. Results: Very few article regarding effect of therapeutic of US for its use of insonation for treatment of patient with pain and soft tissue injury are available. This review article mainly emphasizes the therapeutic utility of US in dentistry for its effectiveness to decrease joint stiffness, reduce pain and muscle spasms and improve muscle mobility. In vivo studies have shown very little clinical effects. Conclusions: Further research is warranted in this clinically important area to make the development of noninvasive, multifunctional ultrasound devices for repair, regeneration and other therapeutic utility a success.

Coupling model of energy consumption with changes in environmental utility

International Nuclear Information System (INIS)

He Hongming; Jim, C.Y.

2012-01-01

This study explores the relationships between metropolis energy consumption and environmental utility changes by a proposed Environmental Utility of Energy Consumption (EUEC) model. Based on the dynamic equilibrium of input–output economics theory, it considers three simulation scenarios: fixed-technology, technological-innovation, and green-building effect. It is applied to analyse Hong Kong in 1980–2007. Continual increase in energy consumption with rapid economic growth degraded environmental utility. First, energy consumption at fixed-technology was determined by economic outcome. In 1990, it reached a critical balanced state when energy consumption was 22×10 9 kWh. Before 1990 (x 1 9 kWh), rise in energy consumption improved both economic development and environmental utility. After 1990 (x 1 >22×10 9 kWh), expansion of energy consumption facilitated socio-economic development but suppressed environmental benefits. Second, technological-innovation strongly influenced energy demand and improved environmental benefits. The balanced state remained in 1999 when energy consumption reached 32.33×10 9 kWh. Technological-innovation dampened energy consumption by 12.99%, exceeding the fixed-technology condition. Finally, green buildings reduced energy consumption by an average of 17.5% in 1990–2007. They contributed significantly to energy saving, and buffered temperature fluctuations between external and internal environment. The case investigations verified the efficiency of the EUEC model, which can effectively evaluate the interplay of energy consumption and environmental quality. - Highlights: ► We explore relationships between metropolis energy consumption and environmental utility. ► An Environmental Utility of Energy Consumption (EUEC) model is proposed. ► Technological innovation mitigates energy consumption impacts on environmental quality. ► Technological innovation decreases demand of energy consumption more than fixed technology scenario

Perspectives on the future of the electric utility industry

International Nuclear Information System (INIS)

Tonn, B.; Schaffhauser, A.

1994-04-01

This report offers perspectives on the future of the electric utility industry. These perspectives will be used in further research to assess the prospects for Integrated Resource Planning (IRP). The perspectives are developed first by examining economic, political and regulatory, societal, technological, and environmental trends that are (1) national and global in scope and (2) directly related to the electric utility industry. Major national and global trends include increasing global economic competition, increasing political and ethnic strife, rapidly changing technologies, and increasing worldwide concern about the environment. Major trends in the utility industry include increasing competition in generation; changing patterns of electricity demand; increasing use of information technology to control power systems; and increasing implementation of environmental controls. Ways in which the national and global trends may directly affect the utility industry are also explored. The trends are used to construct three global and national scenarios- ''business as usual,'' ''technotopia future,'' and ''fortress state'' -and three electric utility scenarios- ''frozen in headlights,'' ''megaelectric,'' and ''discomania.'' The scenarios are designed to be thought provoking descriptions of potential futures, not predictions of the future, although three key variables are identified that will have significant impacts on which future evolves-global climate change, utility technologies, and competition. While emphasis needs to be placed on understanding the electric utility scenarios, the interactions between the two sets of scenarios is also of interest

Perspectives on the future of the electric utility industry

Energy Technology Data Exchange (ETDEWEB)

Tonn, B. [Oak Ridge National Lab., TN (United States); Schaffhauser, A. [Tennessee Univ., Knoxville, TN (United States)

1994-04-01

This report offers perspectives on the future of the electric utility industry. These perspectives will be used in further research to assess the prospects for Integrated Resource Planning (IRP). The perspectives are developed first by examining economic, political and regulatory, societal, technological, and environmental trends that are (1) national and global in scope and (2) directly related to the electric utility industry. Major national and global trends include increasing global economic competition, increasing political and ethnic strife, rapidly changing technologies, and increasing worldwide concern about the environment. Major trends in the utility industry include increasing competition in generation; changing patterns of electricity demand; increasing use of information technology to control power systems; and increasing implementation of environmental controls. Ways in which the national and global trends may directly affect the utility industry are also explored. The trends are used to construct three global and national scenarios- ``business as usual,`` ``technotopia future,`` and ``fortress state`` -and three electric utility scenarios- ``frozen in headlights,`` ``megaelectric,`` and ``discomania.`` The scenarios are designed to be thought provoking descriptions of potential futures, not predictions of the future, although three key variables are identified that will have significant impacts on which future evolves-global climate change, utility technologies, and competition. While emphasis needs to be placed on understanding the electric utility scenarios, the interactions between the two sets of scenarios is also of interest.

Nanotechnology risk perceptions and communication: emerging technologies, emerging challenges.

Science.gov (United States)

Pidgeon, Nick; Harthorn, Barbara; Satterfield, Terre

2011-11-01

Nanotechnology involves the fabrication, manipulation, and control of materials at the atomic level and may also bring novel uncertainties and risks. Potential parallels with other controversial technologies mean there is a need to develop a comprehensive understanding of processes of public perception of nanotechnology uncertainties, risks, and benefits, alongside related communication issues. Study of perceptions, at so early a stage in the development trajectory of a technology, is probably unique in the risk perception and communication field. As such it also brings new methodological and conceptual challenges. These include: dealing with the inherent diversity of the nanotechnology field itself; the unfamiliar and intangible nature of the concept, with few analogies to anchor mental models or risk perceptions; and the ethical and value questions underlying many nanotechnology debates. Utilizing the lens of social amplification of risk, and drawing upon the various contributions to this special issue of Risk Analysis on Nanotechnology Risk Perceptions and Communication, nanotechnology may at present be an attenuated hazard. The generic idea of "upstream public engagement" for emerging technologies such as nanotechnology is also discussed, alongside its importance for future work with emerging technologies in the risk communication field. © 2011 Society for Risk Analysis.

Achievement report for fiscal 1998 on development of wide-area energy utilization network system. Eco-energy urban system (Research of systematization technology and evaluation technology out of energy system designing technology researches); Koiki energy riyo network system kaihatsu (eko energy toshi system) 1998 nendo seika hokokusho. Energy system sekkei gijutsu no kenkyu no uchi system ka gijutsu hyoka gijutsu no kenkyu

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-03-01

For the realization of urban society respecting enhanced energy efficiency and environmental protection, cities and surrounding industrial facilities are investigated for the development of element technologies involving energy recovery, conversion, transportation, storage, delivery, utilization, etc., and for the compounding of urban energy systems. In the study of the effect of introduction, assumption is made of delivery of heat to an urban heat accumulation district from a plant equivalent to a district air-conditioning system which is covered by the existing technologies. Also assumed are the delivery of exhaust heat to the said plant utilizing eco-energy element technologies and the replacement of existing technologies by eco-energy element technologies. Comparison is established in terms of energy efficiency, environmental protection, and economy, and then it is found that the eco-energy element technologies for the utilization of exhaust heat are in all cases superior to the conventional technologies as far as energy efficiency and environmental protection are concerned. It is found, however, that they are inferior from the economic viewpoint. The energy efficiency technology in heat transportation is superior to the existing technology in energy efficiency and environmental protection but roughly equal to the existing ones in economy. (NEDO)

A Comprehensive Plan for Global Energy Revolution

Science.gov (United States)

Blees, T.

2009-05-01

, as well as utilize the world's prodigious stockpiles of depleted uranium to supply all of humanity's energy needs for hundreds of years. Not only will IFR operations produce no greenhouse gas emissions, but even their construction will create several times less emissions per megawatt than wind and solar projects. Commercial development of zero-emission energy carriers for vehicle transport (such as hydrogen or boron) can assure that we efficiently translate IFR- generated power to our transportation infrastructure while eliminating the choking pollution of the world's ever- expanding vehicle fleet. If we make the decisions that must be made to deploy these new technologies, we stand at the threshhold of a post-scarcity era even as the starkness of our population dilemma would seem to indicate the opposite. Here is the blueprint for that new era, a comprehensive plan to provide limitless clean energy that can be implemented at less expense than taking a business-as-usual approach.

Photon technology. Laser processing technology; Photon technology. Laser process gijutsu

Energy Technology Data Exchange (ETDEWEB)

NONE

1996-03-01

Survey has been conducted to develop laser processing technology utilizing the interaction between substance and photon. This is a part of the leading research on photon technology development. The photon technology development is aimed at novel technology development highly utilizing the quantum nature of photons. In the field of laser processing, high quality photons are used as tools, special functions of atoms and molecules will be discovered, and processing for functional fabrication (photon machining) will be established. A role of laser processing in industries has become significant, which is currently spreading not only into cutting and welding of materials and scalpels but also into such a special field as ultrafine processing of materials. The spreading is sometimes obstructed due to the difficulty of procurement of suitable machines and materials, and the increase of cost. The purpose of this study is to develop the optimal laser technology, to elucidate the interaction between substance and photon, and to develop the laser system and the transmission and regulation systems which realize the optimal conditions. 387 refs., 115 figs., 25 tabs.

Technology Transfer and Technology Transfer Intermediaries

Science.gov (United States)

Bauer, Stephen M.; Flagg, Jennifer L.

2010-01-01

A standard and comprehensive model is needed to evaluate and compare technology transfer systems and the stakeholders within these systems. The principle systems considered include federal laboratories, U.S. universities, the rehabilitation engineering research centers (RERCs), and large small business innovation research programs. An earlier…

National Utility Rate Database: Preprint

Energy Technology Data Exchange (ETDEWEB)

Ong, S.; McKeel, R.

2012-08-01

When modeling solar energy technologies and other distributed energy systems, using high-quality expansive electricity rates is essential. The National Renewable Energy Laboratory (NREL) developed a utility rate platform for entering, storing, updating, and accessing a large collection of utility rates from around the United States. This utility rate platform lives on the Open Energy Information (OpenEI) website, OpenEI.org, allowing the data to be programmatically accessed from a web browser, using an application programming interface (API). The semantic-based utility rate platform currently has record of 1,885 utility rates and covers over 85% of the electricity consumption in the United States.

The impact of computers on the nuclear utility industry

International Nuclear Information System (INIS)

Taylor, J.J.

1984-01-01

The applications of computer technology to the nuclear utility industry are discussed in light of recent phenomenal growth of computer hardware and software. Computer applications in existence in the power plants are presented, as well as potential future development for plant design, construction, operation, maintenance and retrofit. Utility concerns are addressed. The study concludes that the applications of computer technology to the nuclear utility industry are highly promising and evolutionary in nature

Comprehensive Care

Science.gov (United States)

... Comprehensive Care Share this page Facebook Twitter Email Comprehensive Care Understand the importance of comprehensive MS care ... In this article A complex disease requires a comprehensive approach Today multiple sclerosis (MS) is not a ...

Utilizing the right mix of environmental cleanup technologies

International Nuclear Information System (INIS)

Whitaker, Wade; Bergren, Chris; Flora, Mary

2007-01-01

The Savannah River Site (SRS) is a 310-square-mile United States Department of Energy nuclear facility located along the Savannah River near Aiken, South Carolina. During operations, which started in 1951, hazardous substances (chemicals and radionuclides) were released to the environment. The releases occurred as a result of inadvertent spills and waste disposal in unlined pits and basins which was common practice before environmental regulations existed. The hazardous substances have migrated to the vadose zone and groundwater in many areas of the SRS, resulting in 515 waste units that are required by environmental regulations, to undergo characterization and, if needed, remediation. In the initial years of the SRS environmental cleanup program (early 1990's), the focus was to use common technologies (such as pump and treat, air stripping, excavation and removal) that actively and tangibly removed contamination. Exclusive use of these technologies required continued and significant funding while often failing to meet acceptable clean-up goals and objectives. Recognizing that a more cost-effective approach was needed, SRS implemented new and complementary remediation methods focused on active and passive technologies targeted to solve specific remediation problems. Today, SRS uses technologies such as chemical / pH-adjusting injection, phyto-remediation, underground cutoff walls, dynamic underground stripping, soil fracturing, microbial degradation, baro-balls, electrical resistance heating, soil vapor extraction, and micro-blowers to more effectively treat contamination at lower costs. Additionally, SRS's remediation approach cost effectively maximizes cleanup as SRS works pro-actively with multiple regulatory agencies. Using GIS, video, animation, and graphics, SRS is able to provide an accurate depiction of the evolution of SRS groundwater and vadose zone cleanup activities to convince stakeholders and regulators of the effectiveness of various cleanup

UTILIZING THE RIGHT MIX OF ENVIRONMENTAL CLEANUP TECHNOLOGIES

International Nuclear Information System (INIS)

Bergren, C; Wade Whitaker, W; Mary Flora, M

2007-01-01

The Savannah River Site (SRS) Figure 1 is a 310-square-mile United States Department of Energy nuclear facility located along the Savannah River near Aiken, South Carolina. During operations, which started in 1951, hazardous substances (chemicals and radionuclides) were released to the environment. The releases occurred as a result of inadvertent spills and waste disposal in unlined pits and basins which was common practice before environmental regulations existed. The hazardous substances have migrated to the vadose zone and groundwater in many areas of the SRS, resulting in 515 waste units that are required by environmental regulations, to undergo characterization and, if needed, remediation. In the initial years of the SRS environmental cleanup program (early 1990s), the focus was to use common technologies (such as pump and treat, air stripping, excavation and removal) that actively and tangibly removed contamination. Exclusive use of these technologies required continued and significant funding while often failing to meet acceptable clean-up goals and objectives. Recognizing that a more cost-effective approach was needed, SRS implemented new and complementary remediation methods focused on active and passive technologies targeted to solve specific remediation problems. Today, SRS uses technologies such as chemical/pH-adjusting injection, phytoremediation, underground cutoff walls, dynamic underground stripping, soil fracturing, microbial degradation, baroballs, electrical resistance heating, soil vapor extraction, and microblowers to more effectively treat contamination at lower costs. Additionally, SRS's remediation approach cost effectively maximizes cleanup as SRS works proactively with multiple regulatory agencies. Using GIS, video, animation, and graphics, SRS is able to provide an accurate depiction of the evolution of SRS groundwater and vadose zone cleanup activities to convince stakeholders and regulators of the effectiveness of various cleanup

ASSESSING TAXPAYER BEHAVIOR IN UTILIZING E-FILLING TAX SYSTEM WITH THE PERSPECTIVE OF TECHNOLOGY ACCEPTANCE MODEL AND THE THEORY OF PLANNED BEHAVIOR

Directory of Open Access Journals (Sweden)

Maharani H.

2017-07-01

Full Text Available This study aims to assess the factors which influence taxpayer behavior in utilizing e-filling tax system. This study combines Technology Acceptance Model and the Theory of Planned Behavior. The data was collected through a survey method. It took 100 respondents of the personal taxpayers of the Pratama Gresik Utara tax office's employee in utilizing the e-filing to submit their tax return. In order to assess the data, the researchers used Partial Least Square statistical method. The finding shows that the intention construct has a positive influence over the e-filling utilization behavior. Behavioral control has a positive influence over the behavior through the e-filing utilization intention. Easy of use, purpose, attitude, subjective norm, and behavioral control have a positive influence over the e-filing utilization intention. Credibility has a negative influence over the e-filing utilization intention. This study involved the Application Service Provider, Directorate General of Taxes, and KPP Pratama which have to more pay attention the behavior, intention, easy of use, purpose, attitude, subjective norm, and behavioral control of the taxpayer.

Electric and gas utility marketing of residential energy conservation case studies

Energy Technology Data Exchange (ETDEWEB)

None

1980-05-01

The objective of this research was to obtain information about utility conservation marketing techniques from companies actively engaged in performing residential conservation services. Many utilities currently are offering comprehensive services (audits, listing of contractors and lenders, post-installation inspection, advertising, and performing consumer research). Activities are reported for the following utilities: Niagara Mohawk Power Corporation; Tampa Electric Company; Memphis Light, Gas, and Water Division; Northern States Power-Wisconsin; Public Service Company of Colorado; Arizona Public Service Company; Pacific Gas and Electric Company; Sacramento Municipal Utility District; and Pacific Power and Light Company.

The Impact of a Technology Coordinator's Belief System upon Using Technology to Create a Community's History

Science.gov (United States)

Waring, Scott M.

2010-01-01

As it has been shown that teachers of social studies content are less likely than teachers of other content areas to utilize technology in their classroom, this study focuses on one instructional technology coordinators' beliefs towards technology, instruction, and students and how these beliefs impacted how technology was utilized during a…

FY 1998 report on the results of the development of utilization technology of biological resources such as bioconsortia. Development of the bioconsortia system utilization/production technology; 1998 nendo fukugo seibutsukei nado seibutsu shigen riyo gijutsu kaihatsu seika hokokusho. Fukugo seibutsukei riyo seisan gijutsu no kaihatsu

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-03-01

For the purpose of establishing the technology to use high grade functions of the bioconsortia system, the R and D were conducted, and the FY 1998 results were summed up. As to the study of functional material producing technology, screening of the 2400 strains owned by Marine Biotechnology Institute was conducted using reporter strain, and about 400 strains of homoserine lactone producing bacteria which are interbiological information convey substances were obtained. Concerning the effective decomposing/purifying technology of petroleum products, study of petroleum decomposition analysis technology was finished in the development of culture/control technology of petroleum decomposition microbial consortia constitutive bacteria. Relating to the analysis of the petroleum decomposition microbial consortia, changes in the bacteria population at the site of the heavy oil pollution accident on the Sea of Japan were investigated for the past one year by the PCR/DGGE method. It was found out that levels of the oil pollution in ocean could be assessed by measuring the concentration of Alcanivorax. As to the technology for highly utilizing unused petroleum fractions, conducted were the chemical analysis of photolytic crude oil, selection of the decomposition microbial consortia, etc. (NEDO)

Utilization of Information and Communication Technologies in Mathematics Learning

Science.gov (United States)

Saadati, Farzaneh; Tarmizi, Rohani Ahmad; Ayub, Ahmad Fauzi Mohd

2014-01-01

Attention to integrate technology in teaching and learning has provided a major transformation in the landscape of education. Therefore, many innovations in teaching and learning have been technology-driven. The study attempted to examine what is engineering students' perception regarding the use of Information and Communication Technologies (ICT)…

Cutting-edge technology for public health workforce training in comparative effectiveness research.

Science.gov (United States)

Salinas-Miranda, Abraham A; Nash, Michelle C; Salemi, Jason L; Mbah, Alfred K; Salihu, Hamisu M

2013-06-01

A critical mass of public health practitioners with expertise in analytic techniques and best practices in comparative effectiveness research is needed to fuel informed decisions and improve the quality of health care. The purpose of this case study is to describe the development and formative evaluation of a technology-enhanced comparative effectiveness research learning curriculum and to assess its potential utility to improve core comparative effectiveness research competencies among the public health workforce. Selected public health experts formed a multidisciplinary research collaborative and participated in the development and evaluation of a blended 15-week comprehensive e-comparative effectiveness research training program, which incorporated an array of health informatics technologies. Results indicate that research-based organizations can use a systematic, flexible, and rapid means of instructing their workforce using technology-enhanced authoring tools, learning management systems, survey research software, online communities of practice, and mobile communication for effective and creative comparative effectiveness research training of the public health workforce.

Minimal canonical comprehensive Gröbner systems

OpenAIRE

Manubens, Montserrat; Montes, Antonio

2009-01-01

This is the continuation of Montes' paper "On the canonical discussion of polynomial systems with parameters''. In this paper, we define the Minimal Canonical Comprehensive Gröbner System of a parametric ideal and fix under which hypothesis it exists and is computable. An algorithm to obtain a canonical description of the segments of the Minimal Canonical CGS is given, thus completing the whole MCCGS algorithm (implemented in Maple and Singular). We show its high utility for applications, suc...

Utilization of Indigenous Technical Knowledge (ITK'S) in Arid and Semi-Arid Regions of Eastern Kenya: A Coping Strategy to Shocks of Market Utilization

International Nuclear Information System (INIS)

Ndubi, J

2002-01-01

Most of the farmers in the arid and semi arid are poorly endowed with resources. Market liberalisation and withdrawal of government support (subsidies) in accessing some of the modern technologies has led to decreased use of most of the modern recommended technologies due to their high prices. A a coping strategy most of the resources poor farmers have turned to utilization of the indigenous technology to sustain their agricultural production. The main objective of this paper is to document the indigenous technologies utilized by farmers, explore the possibility of refining/calibrating and up-scaling them and the advantages and disadvantages of utilizing them as identified by the farmers. The method for data collection was by use of interviews the farmers who were stratified in terms of gender and age sets (young, middle aged and old) and data analysed by use of qualitative methods. The results indicate that, most farmers do utilize indigenous technology in crops, livestock pests, diseases, soil and water conservation as cropping strategies to increase input prices due to market liberalization and withdrawal of government subsidies. It was also observed that, there is need for scientists to calibrate the most important practices for improved adoption and up-scaling of the main indigenous technologies within and outside the study areas

Emerging technologies in electricity generation : an energy market assessment

International Nuclear Information System (INIS)

2006-03-01

Canada's National Energy Board (NEB) monitors the supply of electricity as well as its demand in both domestic and export markets. It monitors the main drivers affecting current trends in generation, demand, prices, infrastructure additions, and inter-regional and international trade. This document presented an assessment of renewable and other emerging technologies that are considered to have significant promise and increased application in Canada over the longer term. It provided comprehensive information on the status and prospects for these technologies, related issues and regional perspectives. Alternative and renewable resources and demand management are becoming more important in addressing air quality issues and supply adequacy. In preparation of this report, staff at the NEB participated in a series of informal meetings with electric utilities, independent power producers, provincial energy regulators, power system operators and those engaged in technology development. The report involved on-site information gathering at wind farms, small hydro facilities, biomass, solar and geothermal operations and other facilities associated with emerging energy technologies such as fuel cells and ocean energy. Clean coal technologies that refer to methods by which emissions from coal-fired generation can be reduced were also evaluated. It was noted that the prospects for emerging technologies vary among the provinces and territories depending on regional resources, provincial government policies and strategies regarding fuel preferences. It was noted that currently in Canada, only 3 per cent of the installed generating capacity consists of emerging technologies. This low penetration is due to the low cost of electricity derived from conventional sources and to the structure of the industry in which large publicly owned utilities have historically opted for large central generating stations. It was suggested that the large increase in fossil fuel prices, public concern

Exploitation and Utilization of Oilfield Geothermal Resources in China

Directory of Open Access Journals (Sweden)

Shejiao Wang

2016-09-01

Full Text Available Geothermal energy is a clean, green renewable resource, which can be utilized for power generation, heating, cooling, and could effectively replace oil, gas, and coal. In recent years, oil companies have put more efforts into exploiting and utilizing geothermal energy with advanced technologies for heat-tracing oil gathering and transportation, central heating, etc., which has not only reduced resource waste, but also improved large-scale and industrial resource utilization levels, and has achieved remarkable economic and social benefits. Based on the analysis of oilfield geothermal energy development status, resource potential, and exploitation and utilization modes, the advantages and disadvantages of harnessing oilfield geothermal resource have been discussed. Oilfield geothermal energy exploitation and utilization have advantages in resources, technical personnel, technology, and a large number of abandoned wells that could be reconstructed and utilized. Due to the high heat demand in oilfields, geothermal energy exploitation and utilization can effectively replace oil, gas, coal, and other fossil fuels, and has bright prospects. The key factors limiting oilfield geothermal energy exploitation and utilization are also pointed out in this paper, including immature technologies, lack of overall planning, lack of standards in resource assessment, and economic assessment, lack of incentive policies, etc.

Does Methodological Guidance Produce Consistency? A Review of Methodological Consistency in Breast Cancer Utility Value Measurement in NICE Single Technology Appraisals.

Science.gov (United States)

Rose, Micah; Rice, Stephen; Craig, Dawn

2017-07-05

Since 2004, National Institute for Health and Care Excellence (NICE) methodological guidance for technology appraisals has emphasised a strong preference for using the validated EuroQol 5-Dimensions (EQ-5D) quality-of-life instrument, measuring patient health status from patients or carers, and using the general public's preference-based valuation of different health states when assessing health benefits in economic evaluations. The aim of this study was to review all NICE single technology appraisals (STAs) for breast cancer treatments to explore consistency in the use of utility scores in light of NICE methodological guidance. A review of all published breast cancer STAs was undertaken using all publicly available STA documents for each included assessment. Utility scores were assessed for consistency with NICE-preferred methods and original data sources. Furthermore, academic assessment group work undertaken during the STA process was examined to evaluate the emphasis of NICE-preferred quality-of-life measurement methods. Twelve breast cancer STAs were identified, and many STAs used evidence that did not follow NICE's preferred utility score measurement methods. Recent STA submissions show companies using EQ-5D and mapping. Academic assessment groups rarely emphasized NICE-preferred methods, and queries about preferred methods were rare. While there appears to be a trend in recent STA submissions towards following NICE methodological guidance, historically STA guidance in breast cancer has generally not used NICE's preferred methods. Future STAs in breast cancer and reviews of older guidance should ensure that utility measurement methods are consistent with the NICE reference case to help produce consistent, equitable decision making.

Comprehension of atypical literary text and scholastic achievement

Directory of Open Access Journals (Sweden)

Božin Aurel A.

2009-01-01

Full Text Available With the aim of gaining insight into literary text comprehension and the linkage between that comprehension and scholastic achievement during the first years of schooling, a research was conducted on the sample of 152 third and fourth grade pupils from one urban and one rural school. After having read silently a selected atypical excerpt from one literary text, interviewed pupils filled out the questionnaire constructed for the purposes of this research starting from the 11 categories of text comprehension singled out based on the theory of comprehension and interpretation of literary text and the current curriculum. In the first part of the research we applied the Children's orientation scale by Malka Margalit, and school marks were used as a measurement of scholastic achievement. Research results point out that, among other things, inferring on the basis of what has been read poses the greatest difficulty for third and fourth graders, that is, that almost three quarters of them are not capable of determining the meaning of some representative sentences from that text. In the positive sense, it was established that almost three quarters of them perceive beautiful poetic expressions and about 80% of them can at least to a certain extent recognize character descriptions, emotional situations and moods, that is, discover significant facts. Answers to the questions regarding the majority of categories of text comprehension are significantly correlated with scholastic achievement. As expected, the highest correlations between the measures on text comprehension categories are with the marks in native (Serbian language. Partial correlations between the measures on certain categories of text comprehension and measurements of scholastic achievement (excluding the influence of feeling of coherence are not significantly different from bivariate. Based on the obtained data, authors conclude that the utilized system of categories can be a useful tool for

Facilitating programming comprehension for novice learners with multimedia approach: A preliminary investigation

Science.gov (United States)

Annamalai, Subashini; Salam, Sobihatun Nur Abdul

2017-10-01

This research paper presents the preliminary investigation on the use of an interactive multimedia courseware named MAFPro, to facilitate C Programming lessons for novice learners. The courseware utilizes the elements of multimedia that focus on enhancing learners' programming comprehension. Among the aspects that were examined were the students' programming comprehension and their perceived motivation of MAFPro. This study was carried out in a survey design method with the participation of 30 undergraduates who are novice learners. The data analysis indicates that the multimedia courseware, MAFPro that has been used in the C programming classroom has a significant difference on the undergraduates' programming comprehension. The students also perceived MAFPro as motivating and engaging.

UTILIZATION OF LOW NOx COAL COMBUSTION BY-PRODUCTS

Energy Technology Data Exchange (ETDEWEB)

J.Y. Hwang; X. Huang; M.G. McKimpson; R.E. Tieder; A.M. Hein; J.M. Gillis; D.C. Popko; K.L. Paxton; Z. Li; X. Liu; X. Song; R.I. Kramer

1998-12-01

Low NO{sub x} combustion practices are critical for reducing NO{sub x} emissions from power plants. These low NO{sub x} combustion practices, however, generate high residual carbon contents in the fly ash produced. These high carbon contents threaten utilization of this combustion by-product. This research has successfully developed a separation technology to render fly ash into useful, quality-controlled materials. This technology offers great flexibility and has been shown to be applicable to all of the fly ashes tested (more than 10). The separated materials can be utilized in traditional fly ash applications, such as cement and concrete, as well as in nontraditional applications such as plastic fillers, metal matrix composites, refractories, and carbon adsorbents. Technologies to use beneficiated fly ash in these applications are being successfully developed. In the future, we will continue to refine the separation and utilization technologies to expand the utilization of fly ash. The disposal of more than 31 million tons of fly ash per year is an important environmental issue. With continued development, it will be possible to increase economic, energy and environmental benefits by re-directing more of this fly ash into useful materials.

Comprehensive report to Congress Clean Coal Technology Program

International Nuclear Information System (INIS)

1992-06-01

This project will provide a full-scale demonstration of Micronized Coal Reburn (MCR) technology for the control of NO x on a wall-fired steam generator. This demonstration is expected to reduce NO x emissions by 50 to 60%. Micronized coal is coal that has been very finely pulverized (80% less than 325 mesh). This micronized coal, which may comprise up to 30% of the total fuel fired in the furnace, is fired high in the furnace in a fuel-rich reburn zone at a stoichiometry of 0.8. Above the reburn zone, overfire air is injected into the burnout zone at high velocity for good mixing to ensure complete combustion. Overall excess air is 15%. MCR technology reduces NO x emissions with minimal furnace modifications, and the improved burning characteristics of micronized coal enhance boiler performance

UTILIZATION OF INFORMATION AND COMMUNICATION TECHNOLOGIES IN MATHEMATICS LEARNING

Directory of Open Access Journals (Sweden)

Farzaneh Saadati

2014-07-01

Full Text Available Attention to integrate technology in teaching and learning has provided a major transformation in the landscape of education. Therefore, many innovations in teaching and learning have been technology-driven. The study attempted to examine what is engineering students’ perception regarding the use of Information and Communication Technologies (ICT in mathematics learning as well as investigate their opinion about how ICT can be integrated to improve teaching and learning processes. The subjects were Iranian engineering students from two universities. The finding showed they are fully aware of importance of ICT in teaching and learning mathematics. Whilst, they were feeling comfortable and confident with technology, they do not have more experience of using technology in mathematics classes before. The findings supported the other studies, which indicated the potentials of ICT to facilitate students’ learning, improve teaching, and enhance institutional administration as established in the literature.Keywords: Technology, Mathematics Learning, Facebook, Attitude Toward ICT DOI: http://dx.doi.org/10.22342/jme.5.2.1498.138-147

Comparative analysis of video processing and 3D rendering for cloud video games using different virtualization technologies

Science.gov (United States)

Bada, Adedayo; Alcaraz-Calero, Jose M.; Wang, Qi; Grecos, Christos

2014-05-01

This paper describes a comprehensive empirical performance evaluation of 3D video processing employing the physical/virtual architecture implemented in a cloud environment. Different virtualization technologies, virtual video cards and various 3D benchmarks tools have been utilized in order to analyse the optimal performance in the context of 3D online gaming applications. This study highlights 3D video rendering performance under each type of hypervisors, and other factors including network I/O, disk I/O and memory usage. Comparisons of these factors under well-known virtual display technologies such as VNC, Spice and Virtual 3D adaptors reveal the strengths and weaknesses of the various hypervisors with respect to 3D video rendering and streaming.

Cognitive technologies

CERN Document Server

Mello, Alan; Figueiredo, Fabrício; Figueiredo, Rafael

2017-01-01

This book focuses on the next generation optical networks as well as mobile communication technologies. The reader will find chapters on Cognitive Optical Network, 5G Cognitive Wireless, LTE, Data Analysis and Natural Language Processing. It also presents a comprehensive view of the enhancements and requirements foreseen for Machine Type Communication. Moreover, some data analysis techniques and Brazilian Portuguese natural language processing technologies are also described here. .

New Technologies for Reliable, Low-Cost In Situ Resource Utilization

Science.gov (United States)

Ramohalli, Kumar

1998-01-01

New technologies can dramatically alter overall mission feasibility, architecture, window-of-opportunity, and science return. In the specific context of planetary exploration/development, several new technologies have been recently developed. It is significant that every one of these new technologies won a NASA NTR award in 1997-1998. In the area of low-cost space access and planetary transportation, hybrids are discussed. Whether we carry all of the fuel and oxidizer from Earth, or we make some or all of it in situ, mass advantages are shown through calculations. The hybrisol concept, where a solid fuel is cast over a state-of-the-art solid propellant, is introduced as a further advance in these ideas,. Thus, the motor operates as a controllable, high Isp rocket initially, and transitions to a high-thrust rocket after ascent, at which time the empty oxidizer tank is jettisoned. Again, calculations show significant advantages. In the area of efficient energy use for various mechanical actuations and robotic movements, muscle wires are introduced. Not only do we present detailed systems-level schemes, but we also present results from a hardware mechanism that has seen more than 18,000 cycles of operation. Recognizing that power is the real issue in planetary exploration/ development, the concept of LORPEX is introduced as a means of converting low-level energy accumulation into sudden bursts of power that can give factors of millions (in power magnification) in the process; this robot employs a low-power In Situ Resource Utilization (ISRU) unit to accumulate ISRU-generated fuel and oxidizer to be consumed at a rapid rate, chemically in an engine. Drilling, hopping, jumping, and ascent, or even return to Earth, are possible. Again, the hardware has been built and initial systems checkout demonstrated. Long-duration exploration and long-distance travel are made possible through aerobots, as is well known for planets with an atmosphere. However, power has again been a

Recon2Neo4j: applying graph database technologies for managing comprehensive genome-scale networks.

Science.gov (United States)

Balaur, Irina; Mazein, Alexander; Saqi, Mansoor; Lysenko, Artem; Rawlings, Christopher J; Auffray, Charles

2017-04-01

The goal of this work is to offer a computational framework for exploring data from the Recon2 human metabolic reconstruction model. Advanced user access features have been developed using the Neo4j graph database technology and this paper describes key features such as efficient management of the network data, examples of the network querying for addressing particular tasks, and how query results are converted back to the Systems Biology Markup Language (SBML) standard format. The Neo4j-based metabolic framework facilitates exploration of highly connected and comprehensive human metabolic data and identification of metabolic subnetworks of interest. A Java-based parser component has been developed to convert query results (available in the JSON format) into SBML and SIF formats in order to facilitate further results exploration, enhancement or network sharing. The Neo4j-based metabolic framework is freely available from: https://diseaseknowledgebase.etriks.org/metabolic/browser/ . The java code files developed for this work are available from the following url: https://github.com/ibalaur/MetabolicFramework . ibalaur@eisbm.org. Supplementary data are available at Bioinformatics online. © The Author 2016. Published by Oxford University Press.

Comprehensive nuclear materials

CERN Document Server

Allen, Todd; Stoller, Roger; Yamanaka, Shinsuke

2012-01-01

Comprehensive Nuclear Materials encapsulates a panorama of fundamental information on the vast variety of materials employed in the broad field of nuclear technology. The work addresses, in five volumes, 3,400 pages and over 120 chapter-length articles, the full panorama of historical and contemporary international research in nuclear materials, from Actinides to Zirconium alloys, from the worlds' leading scientists and engineers. It synthesizes the most pertinent research to support the selection, assessment, validation and engineering of materials in extreme nuclear environments. The work discusses the major classes of materials suitable for usage in nuclear fission, fusion reactors and high power accelerators, and for diverse functions in fuels, cladding, moderator and control materials, structural, functional, and waste materials.

Medical Information & Technology: Rapidly Expanding Vast Horizons

Science.gov (United States)

Sahni, Anil K.

2012-12-01

During ÑMedical Council Of India?, Platinum Jubilee Year (1933-2008) Celebrations, In Year 2008, Several Scientific Meeting/Seminar/Symposium, On Various Topics Of Contemporary Importance And Relevance In The Field Of ÑMedical Education And Ethics?, Were Organized, By Different Medical Colleges At Various Local, State, National Levels. The Present Discussion, Is An Comprehensive Summary Of Various Different Aspects of ìMedical Information Communication Technologyî, Especially UseFul For The Audience Stratum Group Of Those Amateur Medical & Paramedical Staff, With No Previous Work Experience Knowledge Of Computronics Applications. Outlining The, i.Administration Applications: Medical Records Etc, ii. Clinical Applications: Pros pective Scope Of TeleMedicine Applicabilities Etc iii. Other Applications: Efforts To Augment Improvement Of Medical Education, Medical Presentations, Medical Education And Research Etc. ÑMedical Trancription? & Related Recent Study Fields e.g ÑModern Pharmaceuticals?,ÑBio-Engineering?, ÑBio-Mechanics?, ÑBio-Technology? Etc., Along With Important Aspects Of Computers-General Considerations, Computer Ergonomics Assembled To Summarize, The AwareNess Regarding Basic Fundamentals Of Medical Computronics & Its Practically SuccessFul Utilities.

Examining Engineering & Technology Students' Acceptance of Network Virtualization Technology Using the Technology Acceptance Model

Science.gov (United States)

Yousif, Wael K.

2010-01-01

This causal and correlational study was designed to extend the Technology Acceptance Model (TAM) and to test its applicability to Valencia Community College (VCC) Engineering and Technology students as the target user group when investigating the factors influencing their decision to adopt and to utilize VMware as the target technology. In…

Utilization of Information and Communication Technologies in Mathematics Learning

Directory of Open Access Journals (Sweden)

Farzaneh Saadati

2014-07-01

Full Text Available Attention to integrate technology in teaching and learning has provided a major transformation in the landscape of education. Therefore, many innovations in teaching and learning have been technology-driven. The study attempted to examine what is engineering students’ perception regarding the use of Information and Communication Technologies (ICT in mathematics learning as well as investigate their opinion about how ICT can be integrated to improve teaching and learning processes. The subjects were Iranian engineering students from two universities. The finding showed they are fully aware of importance of ICT in teaching and learning mathematics. Whilst, they were feeling comfortable and confident with technology, they do not have more experience of using technology in mathematics classes before. The findings supported the other studies, which indicated the potentials of ICT to facilitate students’ learning, improve teaching, and enhance institutional administration as established in the literature.

Utilization of maternal health care services in post-conflict Nepal

Directory of Open Access Journals (Sweden)

Bhandari TR

2015-08-01

Full Text Available Tulsi Ram Bhandari, Prabhakaran Sankara Sarma, Vellappillil Raman Kutty Achutha Menon Centre for Health Science Studies, Sree Chitra Tirunal Institute for Medical Sciences and Technology, Trivandrum, Kerala, India Background: Despite a decade-long armed conflict in Nepal, the country made progress in reducing maternal mortality and is on its way to achieve the Millennium Development Goal Five. This study aimed to assess the degree of the utilization of maternal health care services during and after the armed conflict in Nepal.Methods: This study is based on Nepal Demographic and Health Survey data 2006 and 2011. The units of analysis were women who had given birth to at least one child in the past 5 years preceding the survey. First, we compared the utilization of maternal health care services of 2006 with that of 2011. Second, we merged the two data sets and applied logistic regression to distinguish whether the utilization of maternal health care services had improved after the peace process 2006 was underway.Results: In 2011, 85% of the women sought antenatal care at least once. Skilled health workers for delivery care assisted 36.1% of the women, and 46% of the women attended postnatal care visit at least once. These figures were 70%, 18.7%, and 16%, respectively, in 2006. Similarly, women were more likely to utilize antenatal care at least once (odds ratio [OR] =2.18, confidence interval [CI] =1.95–2.43, skilled care at birth (OR =2.58, CI =2.36–2.81, and postnatal care at least once (OR =4.13, CI =3.75–4.50 in 2011.Conclusion: The utilization of maternal health care services tended to increase continuously during both the armed conflict and the post-conflict period in Nepal. However, the increasing proportion of the utilization was higher after the Comprehensive Peace Process Agreement 2006. Keywords: antenatal care, armed conflict, Nepal, post-conflict, postnatal care, skilled care at birth

Developing Native-Like Listening Comprehension Materials Perceptions of a Digital Approach

Directory of Open Access Journals (Sweden)

Herri Mulyono

2016-01-01

Full Text Available This paper reported the attempt teachers did in developing native-like (NLS listening materials for their EFL learners using a text-to-speech (TTS technology. Observation was carried out to record teachers’ procedures for developing NLS materials. Interview with teachers were undertaken to explore their’ perceptions towards the NLS listening materials and the benefits they gained from developing instructional media using technology. In addition, a questionnaire was distributed to 65 eight-grade pupils to gather information related to their opinions regarding the listening materials developed and used by their teachers. The findings show that teachers and pupils responded positively towards the NLS materials for listening comprehension. In addition, teachers were found to have more confidence in teaching listening skill while using the technology. There are three conditions which endorse this teaching confidence: the suitability of instructional materials used with the learning curriculum and pupils’ level of English proficiency, teachers’ self-efficacy to the teaching task, and the integration of technology in classroom teaching. The study suggests that TTS system can be used as computer assisted language learning (CALL application particularly in the development of listening comprehension materials. The study also confirms earlier studies that teacher professional development can be promoted through integrated training on technology for classroom use.

Achievement report for fiscal 1997 on the development of technologies for utilizing biological resources such as complex biosystems. Development of complex biosystem analyzing technology; 1997 nendo fukugo seibutsukei nado seibutsu shigen riyo gijutsu kaihatsu seika hokokusho. Fukugo seibutsukei kaiseki gijutsu no kaihatsu

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-03-01

The aim is to utilize the sophisticated functions of complex biosystems. In the research and development of technologies for effectively utilizing unexploited resources and substances such as seeweeds and algae, seaweeds are added to seawater to turn into a microbial suspension after the passage of two weeks, the suspension is next scattered on a carageenan culture medium, and then carageenan decomposing microbes are obtained. In the research and development of technologies for utilizing microbe/fauna-flora complex systems, technologies for exploring and analyzing microbes are studied. For this purpose, 48 kinds of sponges and 300 kinds of bacteria symbiotic with the sponges are sampled in Malaysia. Out of them, 15 exhibit enzyme inhibition and Artemia salina lethality activities. In the development of technologies for analyzing the functions of microbes engaged in the production of useful resources and substances for animals and plants, 150 kinds of micro-algae are subjected to screening using protease and chitinase inhibiting activities as the indexes, and it is found that an extract of Isochrysis galbana displays an intense inhibitory activity. The alga is cultured in quantities, the active component is isolated from 20g of dried alga, and its constitution is determined. (NEDO)

FY1998 survey on preparation of data collection related to new energy technology development (cogeneration); 1998 nendo shin energy gijutsu kaihatsu kankei data shu sakusei chosa (cogeneration) chosa hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-03-01

New energy technologies have had the subsidy institutions established in association with advancement of the technologies, and such introduction promoting measures developed as the introduction assistance and advisory project. To promote this development more effectively, it is necessary that different data related to new energies are put into order comprehensively and systematically to be retained as the basic data. Therefore, this paper collects and puts into order the latest published data on cogeneration from among other new energy technology areas, with main regard to system listing, specific introduction examples, subsidy institutions, and how other countries are working on the technologies. Hydroelectric power generation uses up head energy of water by installing power plants along a river from higher location to lower location. Similarly the cogeneration is a kind of multi-stage energy utilization (cascade utilization) system that uses up energy serially from as high oil and natural gas combustion temperature as 1,500 degrees C or higher down to temperature levels used for hot water supply and air conditioning as low as 45 to 50 degrees C. It generates electric power by using a thermal engine, and utilizes waste heat effectively. (NEDO)

Cognitive Modules Utilized for Narrative Comprehension in Children: A Functional Magnetic Resonance Imaging Study

OpenAIRE

Schmithorst, Vincent J.; Holland, Scott K.; Plante, Elena

2005-01-01

The ability to comprehend narratives constitutes an important component of human development and experience. The neural correlates of auditory narrative comprehension in children were investigated in a large-scale functional magnetic resonance imaging (fMRI) study involving 313 subjects ages 5–18. Using group Independent Component Analysis (ICA), bilateral task-related components were found comprising the primary auditory cortex, the mid-superior temporal gyrus, the hippocampus, the angular g...

Electricity Technology Roadmap. Technology for the Sustainable Society. 2025

International Nuclear Information System (INIS)

2002-01-01

The Dutch Electricity Technology Roadmap Initiative is being developed by KEMA as a joint effort of Dutch and European experts of universities, industry and (non)governmental organisations. It aims to assess how to structure the ongoing collaborative research and technological advancement, the exploration of the opportunities and the threats for the electricity-based innovations over the next twenty-five years. In addition it analyses how to manage the transition towards a knowledge based economy and a more sustainable society. To date, about 100 organisations have participated with KEMA and its sponsors in shaping a comprehensive vision of the opportunities to structure the knowledge based economy in the Digital Society with as basis the increase of electricity's value to society. This vision is being translated into a set of technology development destinations and a total of six distinct initiatives for targeted projects. KEMA is leading this ongoing road-mapping effort, with the support of TENNET and EPRI (USA). The Dutch power generation utilities and the Ministry of Economics (EZ) financially support the work. It is an investment in the future of the Dutch knowledge based economy and a guidance to structure and strengthen the value of public and private RandD investments. The Electricity Technology Roadmap Initiative explores a period of fast regulatory, political, technological and institutional change in the electricity enterprise and in the society. The strategic choices made in this period of change can have profound consequences on whether future opportunities are opened or closed, and whether threats increase or are eliminated The reluctance to proceed with important changes is understandable, given the extreme uncertainty under which decisions must be made. No regrets solutions may be appropriate in some circumstances. These situations highlight the need for foresight and the importance of strategic roadmapping. The first year of the Roadmap

Are US utility standby rates inhibiting diffusion of customer-owned generating systems?

International Nuclear Information System (INIS)

Jackson, Jerry

2007-01-01

New, small-scale electric generation technologies permit utility customers to generate some of their own electric power and to utilize waste heat for space heating and other applications at the building site. This combined heat and power (CHP) characteristic can provide significant energy-cost savings. However, most current US utility regulations leave CHP standby rate specification largely to utility discretion resulting in claims by CHP advocates that excessive standby rates are significantly reducing CHP-related savings and inhibiting CHP diffusion. The impacts of standby rates on the adoption of CHP are difficult to determine; however, because of the characteristically slow nature of new technology diffusion. This study develops an agent-based microsimulation model of CHP technology choice using cellular automata to represent new technology information dispersion and knowledge acquisition. Applying the model as an n-factorial experiment quantifies the impacts of standby rates on CHP technologies under alternative diffusion paths. Analysis of a sample utility indicates that, regardless of the likely diffusion process, reducing standby rates to reflect the cost of serving a large number of small, spatially clustered CHP systems significantly increases the adoption of these technologies

Fiscal 1993 report on results of R and D on innovative technology for producing advanced biomaterial. Peptide applied carbon dioxide fixation/effective utilization technology (First volume); 1993 nendo senshin bio zairyo no sosei kako gijutsu no kenkyu kaihatsu seika hokokusho. 1. Peptide oyo nisanka tanso koteika yuko riyo gijutsu

Energy Technology Data Exchange (ETDEWEB)

NONE

1994-03-01

Technology is being developed for preparing functional materials by synthesizing new functional peptides in which non-natural amino acid needed for the functional manifestation is introduced, and by modifying the surface of a base plate such as silica glass by using such peptides. Activities were conducted in the three areas of (1) creation of functional molecules, (2) materialization technology, and (3) comprehensive investigation and research; the activities were carried out independently and parallelly in the first two areas. In (1), design technique for the structures and functions of peptides was developed, as were conformational control technique, synthesis of peptides having optical/electronic functions, peptide synthesis by an enzyme method, and R and D on introduction of non-natural amino acid into peptides; in (2), element technologies were developed such as substrate forming technique (pattern forming and thin film forming technology), substrate modification technique, development of reagent for binding peptide onto a substrate, and R and D on creation of biomaterials having molecular recognition function and its stabilization technique. In (3), progress control in promoting themes and a meeting for exchanging information were conducted, while survey on related element technologies was systematically and comprehensively carried out. (NEDO)

Integrated waste hydrogen utilization project

International Nuclear Information System (INIS)

Armstrong, C.

2004-01-01

'Full text:' The BC Hydrogen Highway's, Integrated Waste Hydrogen Utilization Project (IWHUP) is a multi-faceted, synergistic collaboration that will capture waste hydrogen and promote its use through the demonstration of 'Hydrogen Economy' enabling technologies developed by Canadian companies. IWHUP involves capturing and purifying a small portion of the 600 kg/hr of by-product hydrogen vented to the atmosphere at the ERCO's electrochemical sodium chlorate plant in North Vancouver, BC. The captured hydrogen will then be compressed so it is suitable for transportation on roadways and can be used as a fuel in transportation and stationary fuel cell demonstrations. In summary, IWHUP invests in the following; Facilities to produce up to 20kg/hr of 99.999% pure 6250psig hydrogen using QuestAir's leading edge Pressure Swing Absorption technology; Ultra high-pressure transportable hydrogen storage systems developed by Dynetek Industries, Powertech Labs and Sacre-Davey Engineering; A Mobile Hydrogen Fuelling Station to create Instant Hydrogen Infrastructure for light-duty vehicles; Natural gas and hydrogen (H-CNG) blending and compression facilities by Clean Energy for fueling heavy-duty vehicles; Ten hydrogen, internal combustion engine (H-ICE), powered light duty pick-up vehicles and a specialized vehicle training, maintenance, and emissions monitoring program with BC Hydro, GVRD and the District of North Vancouver; The demonstration of Westport's H-CNG technology for heavy-duty vehicles in conjunction with local transit properties and a specialized vehicle training, maintenance, and emissions monitoring program; The demonstration of stationary fuel cell systems that will provide clean power for reducing peak-load power demands (peak shaving), grid independence and water heating; A comprehensive communications and outreach program designed to educate stakeholders, the public, regulatory bodies and emergency response teams in the local community, Supported by industry

IRANIAN LEARNERS’ PERCEPTIONS OF THE IMPACT OF TECHNOLOGY-ASSISTED INSTRUCTION ON THEIR ENGLISH AURAL/ORAL SKILLS

Directory of Open Access Journals (Sweden)

Rozi Souzanzan

2017-02-01

Full Text Available The present study aimed to investigate the perceptions of Iranian English as Foreign Language (EFL learners regarding the impact of technology-assisted instruction through the utilization of Information and Communication Technologies (ICTs on their listening comprehension and speaking ability. To this end, eighty Iranian EFL learners whose age range was between twenty to thirty five took part in the study. They were randomly divided into four groups and were exposed to technology-assisted instruction on their course-related contents through different ICTs as their out-of-class activities for one hour per week during two and a half months. The ICTs which were the focus of this study included: Podcasts, YouTube, Skype, and Instagram. The analysis of the participants’ answers indicated that the majority of them (83.8% were positive toward technology-assisted instruction. In addition, 80% of them tended to use ICTs for their future language learning purposes.

FY 1998 report on the results of the development of the utilization technology of biological resources such as bioconsortia. Development of the petroleum substituting fuel production technology using biology; 1998 nendo fukugo seibutsukei nado seibutsu shigen riyo gijutsu kaihatsu seika hokokusho. Seibutsu riyo sekiyu daitai nenryo seizo gijutsu no kaihatsu

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-03-01

For the purpose of establishing the analysis technology and industrial utilization technology required for the establishment of the utilization technology of consortia's high functions which are already used in the fermentation technology field over the limit of the conventional bio-technology using functions of single biological species, study was made. As a part of the study, the establishment was aimed at of the high-grade utilization technology of seaweed/algae using the degradation/conversion functions of the consortium base and the useful substance production technology by interaction of the consortium base of organism and flora/fauna. Studies for the establishment of the technology were made in the following two fields: technology to use unused resources such as lignocellulose and technology to produce petroleum substituting useful resources. As to the technology to use unused resources, the establishment was proceeded with of the technology to degrade/convert the seaweed-origin acidic polysaccharide into the useful substance using the consortium system. In FY 1998, in search of the excellent microorganism consortia which can degrade/solubilize carageenan, samples were picked up from the underwater of the Republic of Palau and incubated in the flat culture medium. Thirty-eight kinds of the degraded bacterium group were acquired. Using the degraded bacterium group, {kappa}-carrageenan was degraded and analyzed of the products. (NEDO)

FY 1998 report on the results of the development of the utilization technology of biological resources such as bioconsortia. Development of the petroleum substituting fuel production technology using biology; 1998 nendo fukugo seibutsukei nado seibutsu shigen riyo gijutsu kaihatsu seika hokokusho. Seibutsu riyo sekiyu daitai nenryo seizo gijutsu no kaihatsu

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-03-01

For the purpose of establishing the analysis technology and industrial utilization technology required for the establishment of the utilization technology of consortia's high functions which are already used in the fermentation technology field over the limit of the conventional bio-technology using functions of single biological species, study was made. As a part of the study, the establishment was aimed at of the high-grade utilization technology of seaweed/algae using the degradation/conversion functions of the consortium base and the useful substance production technology by interaction of the consortium base of organism and flora/fauna. Studies for the establishment of the technology were made in the following two fields: technology to use unused resources such as lignocellulose and technology to produce petroleum substituting useful resources. As to the technology to use unused resources, the establishment was proceeded with of the technology to degrade/convert the seaweed-origin acidic polysaccharide into the useful substance using the consortium system. In FY 1998, in search of the excellent microorganism consortia which can degrade/solubilize carageenan, samples were picked up from the underwater of the Republic of Palau and incubated in the flat culture medium. Thirty-eight kinds of the degraded bacterium group were acquired. Using the degraded bacterium group, {kappa}-carrageenan was degraded and analyzed of the products. (NEDO)

Technē/Technology : Researching Cinema and Media Technologies - Their Development, Use, and Impact

NARCIS (Netherlands)

van den Oever, Annie

2014-01-01

Technē/Technology is the up-to-date critical volume on the theories, philosophies, and debates on technology and their productivity for the fields of film and media studies. Comprehensive as well as innovative, it is not organised around a single thesis - except the assertion that technique is a

Engaging, Designing and Making Digital Technologies

DEFF Research Database (Denmark)

Vertesi, Janet; Ribes, David; Forlano, Laura

2017-01-01

Science and Technology Studies (STS) is a flourishing interdisciplinary field that examines the transformative power of science and technology to arrange and rearrange contemporary societies. The Handbook of Science and Technology Studies provides a comprehensive and authoritative overview......, agriculture, security, disasters, environmental justice, and climate change....

Quantitative Proteomics for the Comprehensive Analysis of Stress Responses of Lactobacillus paracasei subsp. paracasei F19.

Science.gov (United States)

Schott, Ann-Sophie; Behr, Jürgen; Geißler, Andreas J; Kuster, Bernhard; Hahne, Hannes; Vogel, Rudi F

2017-10-06

Lactic acid bacteria are broadly employed as starter cultures in the manufacture of foods. Upon technological preparation, they are confronted with drying stress that amalgamates numerous stress conditions resulting in losses of fitness and survival. To better understand and differentiate physiological stress responses, discover general and specific markers for the investigated stress conditions, and predict optimal preconditioning for starter cultures, we performed a comprehensive genomic and quantitative proteomic analysis of a commonly used model system, Lactobacillus paracasei subsp. paracasei TMW 1.1434 (isogenic with F19) under 11 typical stress conditions, including among others oxidative, osmotic, pH, and pressure stress. We identified and quantified >1900 proteins in triplicate analyses, representing 65% of all genes encoded in the genome. The identified genes were thoroughly annotated in terms of subcellular localization prediction and biological functions, suggesting unbiased and comprehensive proteome coverage. In total, 427 proteins were significantly differentially expressed in at least one condition. Most notably, our analysis suggests that optimal preconditioning toward drying was predicted to be alkaline and high-pressure stress preconditioning. Taken together, we believe the presented strategy may serve as a prototypic example for the analysis and utility of employing quantitative-mass-spectrometry-based proteomics to study bacterial physiology.

Comprehension and Generation of Metaphoric Language in Children, Adolescents, and Adults with Dyslexia.

Science.gov (United States)

Kasirer, Anat; Mashal, Nira

2017-05-01

Difficulties with figurative language comprehension were documented in adult dyslexia (DYS). In the present research, we investigated the comprehension and generation of metaphors in 37 children, 35 adolescents, and 34 adults with and without DYS. We also tested the contribution of executive function to metaphor processing. A multiple-choice questionnaire with conventional and novel metaphors was used to assess comprehension; a concept-explanation task was used to test conventional and novel metaphor generation (verbal creativity). The findings indicated differences between the dyslexic children and the control group in conventional metaphor comprehension. However, both groups performed similarly in the novel metaphor comprehension test. Furthermore, although children and adolescents with DYS showed similar performance in metaphor generation as their typically developing peers, adults with DYS generated more metaphors than controls. While scores on tests of verbal knowledge and mental flexibility contributed to the prediction of conventional metaphor comprehension, scores on non-verbal tests and mental flexibility contributed to the prediction of novel metaphor generation. Our findings suggest that individuals with DYS are not impaired in novel metaphor comprehension and metaphor generation and that metaphor comprehension and generation utilize different cognitive resources. Copyright © 2016 John Wiley & Sons, Ltd. Copyright © 2016 John Wiley & Sons, Ltd.

Research and development of basic technologies for the next generation industries, 'recombinant DNA utilizing technology'. Evaluation on the research and development; Jisedai sangyo kiban gijutsu kenkyu kaihatsu 'kumikae DNA riyo gijutsu'. Kenkyu kaihatsu hyoka

Energy Technology Data Exchange (ETDEWEB)

NONE

1991-03-01

Research, development and evaluation were performed with an objective of establishing the basic technology related to the recombinant DNA utilizing technology to create new microorganisms for processes in the chemical industry. The major achievements of the present research and development include establishment of the P450 gene manifestation system attributed from microsomes and mitochondria, and the success of the world's first simultaneous manifestation of P450 and reduction enzyme. Furthermore, the fused enzyme combining P450 and the reduction enzyme genetically was successfully manufactured ahead of the other countries, opening the way to industrializing the recombinant enzymes for use in bio-processes in the chemical industry. In creating a high-efficiency secretion recombinant bacillus subtilis stock, a bacillus subtilis host whose protease activity has been noticeably decreased was created. As an achievement of the research on the 'basic recombinant DNA technology', high-efficiency manifestation vector of medium level thermophile was created, and its usefulness was demonstrated. In addition, a host and vector system for high level thermophile was developed for the first time in the world. These achievements have opened the way to industrial utilization of the thermophilic bacteria. (NEDO)

A comprehensive approach to formulation of seaweed-enriched meat products: From technological development to assessment of healthy properties.

Science.gov (United States)

Cofrades, S; Benedí, J; Garcimartin, A; Sánchez-Muniz, F J; Jimenez-Colmenero, F

2017-09-01

Meat consumption is influenced by various kinds of factors, among them health implications. Different strategies can be effective in developing meat-based functional foods. These basically entail reducing the presence of compounds with negative health implications and enhancing the presence of beneficial compounds. This article reviews a comprehensive model for the development of meat-based functional foods based on a presentation of the research achieved in terms of the design and development of qualitatively and quantitatively modified meat products (frankfurters, patties and restructured steaks). These were reformulated to incorporate nutrients associated with three different seaweeds (wakame-Undaria pinnatifida; nori-Porphyra umbilicalis; and sea spaghetti-Himanthalia elongata) as sources of bioactive substances, while simultaneously reducing sodium and fat and improving fatty acid profiles. Those seaweeds were chosen, because in terms of composition and health implications, abundance on Spanish coasts, relatively widespread consumption, and suitability in terms of flavour and colour they are better suited than others for use as ingredients in new products. It also discusses the consequences of the use of this type of meat-based functional foods (combination of pork meat and 5% of each seaweed with or without hypercholesterolaemic agent included in the diets) on growing animals (Wistar male rats), and their effects on different aspects of lipoprotein metabolism, oxidative stress and liver structure. This article, then, reports a comprehensive approach to the production of seaweed-enriched meat products, considering aspects of technological development aimed at achieving the functional effect. Copyright © 2016 Elsevier Ltd. All rights reserved.

Energy Service Companies as a Component of a Comprehensive University Sustainability Strategy

Science.gov (United States)