Grain filling parameters and yield components in wheat

OpenAIRE

Brdar Milka; Kobiljski Borislav; Balalić-Kraljević Marija

2006-01-01

Grain yield of wheat (Triticum aestivum L.) is influenced by number of grains per unit area and grain weight, which is result of grain filling duration and rate. The aim of the study was to investigate the relationships between grain filling parameters in 4 wheat genotypes of different earliness and yield components. Nonlinear regression estimated and observed parameters were analyzed. Rang of estimated parameters corresponds to rang of observed parameters. Stepwise MANOVA indicated that the ...

Effect of Application of Pseudomonas fluorescent Strains on Yield and Yield Components of Rapeseed Cultivars

Directory of Open Access Journals (Sweden)

R Najafi

2015-09-01

Full Text Available Plant growth promoting rhizobacteria has been identified as an alternative to chemical fertilizer to enhance plant growth and yield directly and indirectly. Use of rhizosphere free living bacteria is one of the methods for crop production and leads to improvement of resources absorption. In order to study of yield, yield components and radiation use efficiency, under application of PGPR condition, an experiment was carried out in 2008 growing season at Agriculture and natural resources research station of Mashhad. The cultivars selected from three rapeseed species belong to Brassica napus, Brassica rapa and Brassica juncea (landrace, BP.18، Goldrush، Parkland، Hyola330، Hyola401. Experimental factorial design was randomized in complete block with three replications. Treatments included six varieties of Rapeseed and inoculations were four levels as non–inoculation, inoculation with P. fluorescens169, P. putida108 and use then together. Results showed that strains of fluorescent pseudomonas bacteria had greatest effects on yield and yield components cultivars. A significant difference in the number of pods per plant and 1000 seed weight observed. The cultivars were different in all treats except 1000 seed weight. Overall results indicated that application of growth stimulating bacteria in combination with different cultivars, had a positive effect growth, yield characteristics of plant varieties of rapeseed plants.

Path and ridge regression analysis of seed yield and seed yield components of Russian wildrye (Psathyrostachys juncea Nevski) under field conditions

DEFF Research Database (Denmark)

Wang, Quanzhen; Zhang, Tiejun; Cui, Jian

2011-01-01

The correlations among seed yield components, and their direct and indirect effects on the seed yield (Z) of Russina wildrye (Psathyrostachys juncea Nevski) were investigated. The seed yield components: fertile tillers m-2 (Y1), spikelets per fertile tillers (Y2), florets per spikelet- (Y3), seed...

Effects of low doses of gamma rays on yield, yield components, and other characters of two maize varieties

International Nuclear Information System (INIS)

Yousif, Z. B.; Jabbo, N. F.; Khalaf, M. Z.; Majid, A. H.; Ali, H. J.

1994-01-01

The study was conducted during the fall of 1991 and 1992 at Al-Latyfia Experimental Station to determine the effect of low doses of gamma rays on yield, yield components, and other characters of two maize varieties. Five doses were used in addition to control. A factorial experiment with randomized complete block design in three replications was used in the study. Results revealed that there was significant difference between varieties in plant and ear height in 1992. However, differences between varieties were also significantly affected by most yield component characters. Low doses significantly affected plant height, weight of 500 kernels in 1991, and kernel row number in 1992. Grain yield was affected significantly in 1991 and 1992 by low doses. Results showed that 2.0 krad was the most useful low dose to increase grain yield, whereas there was no significant effect between varieties in grain yield. 7 refs., 6 tabs

Effects of Salinity and Nitrogen Application Methods on Yield and Yield Components of Wheat (Triticum aestivum L.

Directory of Open Access Journals (Sweden)

R Farshid

2012-07-01

Full Text Available To evaluate interaction of salinity stress and nitrogen use methods on yield and yield components, in experiment was conducted in split plot in randomized complete block with 3 replications. Treatments included: salinity of irrigation water levels 1.5, 4.4 and 7.9 ds/m as main plots, and nitrogen treatments 1. using N fertilizer at 3 stage in soil, 2. using two third N fertilizer in soil at planting and tillering and heading and one third in form of foliar application of N at tillering, 4. using and one third in form of foliar application at heading, 3. Using two third of N fertilizer in soil at planting one third of N fertilizer in soil at planting and two third in form of foliar application at tillering and heading, as sub plots. Results this study showed that increased in salt stress significant decreased total yield components such that showed decrease 41/5 kg/h in yield with increase in per unite salinity. Also methods of nitrogen application in salinity condition, have significant effects on total yield components. At the tillering, one stage of foliar with soil application of urea could increase spike no. m-2 and kernels of spike compared with other treatments. Foliar application of urea at heading stage increased kernels weight.

THE INFLUENCE OF FERTILIZATION ON YIELD AND YIELD COMPONENT FORMATION OF SOYBEAN VARIETIES

Directory of Open Access Journals (Sweden)

Eva CANDRÁKOVÁ

2009-03-01

Full Text Available In 2005 and 2006, the influence of fertilization was investigated on forming of yield components and yield of three soybean varieties in sugar beet growing area. Varieties Korada, Supra and OAC Vision were grown. Number of plants per m2, number of pods per plant, number of seeds in pod, thousand seeds weight, yield of seeds, yield of stems and harvest index were examined. Variants of fertilization: I. non-fertilized control, II. LAV 27 % (40 kg ha-1 net nutrient of N in growing stage of first pair of true leaves unfolded, III. Humix komplet (rate 8 l.ha-1 applied in growing stage of first pair of true leaves unfolded (4 l.ha-1 and in growing stage of first flower buds visible (4 l.ha-1, IV. Humix komplet in rate 8 l.ha-1 applied in growing stage of first pair of true leaves unfolded. The yields of seeds and stems were high significantly influenced by variety, fertilization and year. The significantly highest yield of seeds was achieved by Korada variety (4,04 t.ha-1. Varieties OAC Vision and Supra reached yields in interval 3,74-3,84 t.ha-1. Split rate of Humix komplet (III var significantly influenced yield of seeds and stems. The fertilization have increased weight of seeds in proportion to aboveground phyto-mass weight, what was expressed by harvest index.

Preliminary Evaluation of Yield and Yield Components of Some Khorasanian Sesame Ecotypes (Sesamum indicum L.

Directory of Open Access Journals (Sweden)

A. Nezami

2014-09-01

Full Text Available In most region of Khorasan, sesame ecotypes have been planted for many years, but there is little information about seed yield and yield components of them. Therefore a field experimental was conducted to investigation of yield parameters of 14 sesame ecotypes (MSC1, MSC2, MSC3, MSC4, MSC5, MSC6, MSC7, MSC8, MSC9, MSC10, MSC11, MSC12, MSC13 and MSC14 in randomized complete block design with three replications at experimental station, Collage of Agriculture, Ferdowsi University of Mashhad during 2009. Results showed that there were significant difference (P

Effects of Sowing Date and Limited Irrigation on Yield and Yield Components of Five Rainfed Wheat Varieties in Maragheh Region

Directory of Open Access Journals (Sweden)

A. R. Tavakkoli

2013-03-01

Full Text Available In order to investigate the effects of sowing date (SD and single irrigation (SI amounts on yield and yield components of rainfed wheat varieties, a field experiment was conducted as split-split plots arranged in a randomized complete blocks design with three replications during 2002-2004 at main station of Dryland Agricultural Research Institute in Maragheh, Iran. Treatments included three sowing dates (early, normal and late, three levels of single irrigation (rainfed, 50 mm and 100 mm only at planting time and five wheat varieties (three numbered lines, Azar2 and double-cross Shahi. Results revealed that interactions of SD, SI and wheat varieties were significant for grain yield, number of kernels per spike and water productivity (P≤0.01. Single irrigation at normal planting time increased grain yield, straw, biomass, harvest index, and water productivity. Grain yield and water productivity were increased by 131% and 84.8%, respectively. Single irrigation at late planting time was not significant on agronomic traits and produced low water productivity. Regarding the reaction of wheat to planting date and single irrigation, results showed that normal single irrigation can improve yield, yield components and water productivity index. The effectiveness of single irrigation under dryland conditions can be observed in all wheat cultivars. Although this effectiveness on yield and yield components is observable, but it is necessary to select the time of irrigation properly.

Effect of Different Tillage Methods and Cover Crop Types on Yield and Yield Components of Wheat

Directory of Open Access Journals (Sweden)

Z Sharefee

2018-05-01

Full Text Available Introduction Conservation agriculture is an appropriate strategy for maintaining and improving agricultural resources which increases crop production and stability and also provides environmental protection. This attitude contributes to the conservation of natural resources (soil, water, and air and is one of the most effective ways to overcome the drought crisis, water management and compensation of soil organic matter in arid and semi-arid regions. The practice of zero-tillage decreases the mineralization of organic matter and contributes to the sequestration of organic carbon in the soil. Higher amounts of organic matter in the soil improve soil structure and root growth, water infiltration and retention, and cation exchange capacity. In addition, zero-tillage reduces soil compaction and crop production costs. Cover crops are cultivated to protect the soil from erosion and elements loss by leaching or runoff and also improve the soil moisture and temperature. Given that South Khorasan farmers still use traditional methods of cultivation of wheat, and cover crops have no place in their farming systems, the aim of this study was to investigate the effect of cover crops types and tillage systems on yield and yield components of wheat in Birjand region. Materials and Methods A split plot field experiment was conducted based on randomized complete block design with three replications at the Research Farm of the University of Birjand over the growing season of 2014-2015. The main factor was the type of tillage (no-till, reduced tillage and conventional tillage and cover crop type (chickling pea (Lathyrus sativus, rocket salad (Eruca sativa, triticale (X Triticosecale witmack, barley (Hordeum vulgaris and control (no cover crop was considered as sub plots. Cover crops were planted on July 2014. Before planting wheat, cover crops were dried through spraying paraquat herbicide using a backpack sprayer at a rate of 3 L ha-1. Then the three tillage

Study on Yield and Yield Components of Wheat Genotypes under Different Moisture Regimes

Directory of Open Access Journals (Sweden)

E. Mogtader

2012-10-01

Full Text Available In order to study grain yield and yield components of 16 advanced wheat lines under rainfed and supplementary irrigation conditions, this research was conducted in randomized block design with 3 replications at Maragheh Research Station during 2008-09 seasons. Analysis of variance revealed significant differences for date to heading, plant height, 1000 kernel weight, tiller number, spike length, seed number per spike, spikelet number per spike, peduncle length, harvest index, leaf, sheath length and grain yield. Results also showed that the lines No. 4 (91-142 a 61/3/F35.70/MO73//1D13.1/MLT and 16 (Azar2 with 1895 and 1878 Kg/ha, lines No. 4 and 7 (YUMAI13/5/NAI60/3/14.53/ODIN//CI13441 with 2132 and 2285 Kg/ha had highest grain yield under rainfed and supplementary irrigated conditions respectively. Based on results these 16 lines and cultivars were grouped in 4 and 3 distinct classes using Ward’s Method of cluster analysis under rainfed and irrigated conditions. Path analysis indicated that vigor at shooting stage, seed number per spike and HI were positive important traits to select lines for high yielding potential in this study. HI and TKW had also positive effects on grain under supplementary irrigation.

Effects of nitrogen application method and weed control on corn yield and yield components.

Science.gov (United States)

Sepahvand, Pariya; Sajedi, Nurali; Mousavi, Seyed Karim; Ghiasvand, Mohsen

2014-04-01

The effects of nitrogen fertilizer application and different methods for weed control on yield and yield components of corn was evaluated in Khorramabad in 2011. The experiment was conducted as a split plot based on randomized complete block design in 3 replications. Nitrogen application was as main plot in 4 levels (no nitrogen, broadcasting nitrogen, banding nitrogen and sprayed nitrogen) and methods of weed control were in 4 levels (non-control weeds, application Equip herbicide, once hand control of weeds and application Equip herbicide+once time weeding) was as subplots. Result illustrated that effects of nitrogen fertilizer application were significant on grain and forage yield, 100 seeds weight, harvest index, grain number per row and cob weight per plant. Grain yield increased by 91.4 and 3.9% in application banding and broadcasting for nitrogen fertilizer, respectively, compared to the no fertilizer treatment. The results show improved efficiency of nitrogen utilization by banding application. Grain yield, harvest index, seed rows per cob, seeds per row and cob weight were increased by weed control. In the application of Equip herbicide+ hand weeding treatment corn grain yield was increased 126% in comparison to weedy control. It represents of the intense affects of weed competition with corn. The highest corn grain yield (6758 kg h(-1)) was related to the application banding of nitrogen fertilizer and Equip herbicide+once hand weeding.

Effect of NS-nitragin application on soybean yield and yield components

Directory of Open Access Journals (Sweden)

Marinković Jelena

2010-01-01

Full Text Available Agricultural soils of Serbia are low in soybean symbiotic bacteria and application of bacteriological preparations has been introduced as a regular cultivation practice when growing soybean. A trial was set up on experimental field of Institute of Field and Vegetable Crops from Novi Sad on chernozem soil using a randomized block design with four replicates. Mineral nitrogen fertilizers were used in rates of 0, 30, 60, and 90 kg ha-1 in the experiment. Each of the nitrogen treatments had two variations, with and without inoculation. The effects of inoculation and different nitrogen fertilizer rates on yield and yield components were determined based on the pod number, seed number, 1000 seed mass and protein and oil content in seeds. Significantly higher pod number was observed in inoculated plants with the application of 30 kg N ha-1. Inoculation with NS-Nitragin increased seed number per plant. In treatment with no mineral nitrogen applied and with application of 30 kg N ha-1 and 60 kg N ha-1, 1000 seed mass was statistically higher in inoculated plants than in uninoculated ones. Inoculation produced statistically significant difference in soybean yield only in the treatment with no mineral nitrogen applied. Inoculation and applied mineral nitrogen rates had no significant effect on protein content in soybean grain.

Evaluation of Yield and Yield Components of Some Pinto bean (Phaseolus vulgaris L. Genotypes under Late Season Water Deficit Conditions

Directory of Open Access Journals (Sweden)

somayyeh soheili movahhed

2017-10-01

Full Text Available Introduction Drought or water deficit stress is the most important environmental factor which has severe negative impacts on crop yields, especially when the water stress occurs in the flowering stage. Iran is located in arid and semi-arid areas, therefore, attention to the effects of water deficit stress in different stages of plants growth seems necessary. Bean (Phaseolus vulgaris L. is one of the most important legumes that has a major contribution to human diet and provides an important part of the human protein. According to studies, cultivation areas of legumes in Iran are about 97300 hectares and its total production is about 208350 tons of grain. Bean is a fast-growing plant (Tran and Singh, 2002, thus soil water must be sufficiently available to ensure its desirable growth and yield. The aim of this study was to investigate the effect of drought stress on yield and yield components of some pinto bean (Phaseolus vulgaris L. cultivated in Zanjan province. Materials and methods An experiment was conducted as spilt plot based on randomized complete block design with four replications in Zanjan university research farm. Irrigation levels (control and drought stress and genotypes (Local khomein, Sadri, Ks21193 and Ks21189 were set in the main and subplot, respectively. Water deficit stress was applied during flowering stage (50% of the plants were at anthesis. Sampling was performed to measure yield and yield components at the end of the growth period and final maturity. In this experiment number of pod per Plant, numberof grain per pod, 100 grain weight, grain yield, biological yield and harvest index were measured. Results and Discussion In this experiment it was observed that drought stress, genotype and interact irrigation×genotyps were significantly for all traits except biological yield. Drought stress reduced number of pod perplant, number of grain per pod, 100 grain weight, grain yield, biological yield and Harvest Index. Results

The Effect of Crop Residue and Different NPK Fertilizer Rates on yield Components and Yield of Wheat

Directory of Open Access Journals (Sweden)

fatemeh khamadi

2017-08-01

Full Text Available Introduction Integrated nutrient management involving crop residue/green manures and chemical fertilizer is potential alternative to provide a balanced supply of nutrients, enhance soil quality and thereby sustain higher productivity. The present experiment was undertaken to evaluate the effect of different crop residue management practices and NPK levels on yield components and yield of wheat. Materials and methods Field experiments were conducted during 2012-2014 at department of agronomy, Chamran University. Experiment was laid out in a randomized block designs in split plot arrangement. With three replications. Crop residues were assigned to main plot consistent CR1: wheat residue; CR2: rape residue; CR3: barley residue; CR4: barley residue + vetch; CR5: wheat straw + mungbean; CR6: vetch residue; CR7: mungbean residue; CR8: No residue incorporation as main plot and three NPK fertilizer rates: F1: (180N-120P-100K kg.ha-1; F2: (140N-90P-80K kg.ha-1; F3: (90N-60P-40K kg.ha-1 as sub plots. Twelve hills were collected at physiological maturity for measuring yield components from surrounding area of grain yield harvest area. Yield components, viz. number of spike per m2, seed per spike, 1000- grain weight, plant height were measured. Grain and straw yields were recorded from the central 5 m2 grain yield harvest area of each treatment and harvest index was calculated. Data were subjected to analysis by SAS and mean companions were performed using the Duncan multiple range test producer. Also, graphs were drawn in Excel software. Results and discussion The result of analysis variance showed significant difference between crop residues for evaluated traits. The result indicated that the highest biological and grain yield was obtained when wheat treated with CR5: wheat straw + mungbean (green manure and CR4: barley straw + vetch (green manure. Biological and grain yield increased 31 and 26% respectively by CR5 comparing with control. The highest

Evaluation of the Effect of Crop Rotations on Yield and Yield Components of Bread Wheat (Triticum aestivum L. cv. Darya)

OpenAIRE

H. A. Fallahi; U. Mahmadyarov; H. Sabouri; M. Ezat-Ahmadi4

2013-01-01

Grain yield in wheat is influenced directly and indirectly by other plant characteristics. One of the main goals in wheat breeding programs is increase of grain yield. Considering the role of crop rotation in increasing grain yield, and in order to study the difference between crop rotations for wheat yield and yield components (Darya cultivar), an experiment was conducted with six rotation treatments (wheat-chickpea-wheat, wheat-cotton-wheat, wheat-watermelon-wheat, wheat-wheat-wheat, wheat-...

Seed yield components and their potential interaction in grasses - to what extend does seed weigth influence yield?

DEFF Research Database (Denmark)

Boelt, B; Gislum, R

2010-01-01

 In a first-year seed crop of red fescue (Festuca rubra L.) the degree of lodging was controlled by the use of Moddus (Trinexapac-ethyl). Seed weight was found to increase by the decreasing degree of lodging prior to harvest. The higher seed weights were accompanied by higher yields even though...... the number of reproductive tillers and floret site utilization (FSU) were unaffected by the treatments. Seed yield is affected by several yield components and reflects the interaction between the seed yield potential (e.g. number of reproductive tillers, number of spikelets and florets/spikelet per...... reproductive tiller), the utilization of the potential (e.g. seed set, seed weight) and the realization of the seed yield potential, defined as the number of florets forming a saleable seed. The realization of the seed yield potential is affected by seed retention, seed weight and other traits associated...

Density responses and spatial distribution of cotton yield and yield components in jujube (Zizyphus jujube)/cotton (Gossypium hirsutum) agroforestry

NARCIS (Netherlands)

Wang, Qi; Han, Shuo; Zhang, Lizhen; Zhang, Dongsheng; Werf, van der Wopke; Evers, Jochem B.; Sun, Hongquan; Su, Zhicheng; Zhang, Siping

2016-01-01

Trees are the dominant species in agroforestry systems, profoundly affecting the performance of understory crops. Proximity to trees is a key factor in crop performance, but rather little information is available on the spatial distribution of yield and yield components of crop species under the

SELECTED YIELD COMPONENTS IN WHITE MUSTARD (SINAPIS ALBA VERSUS SULFUR FERTILIZATION

Directory of Open Access Journals (Sweden)

Bożena BARCZAK

2011-10-01

Full Text Available As shown by the research made based on the four-year field experiment, sulfur fertilization, in general, significantly differentiated the white mustard yield components. Of all the factors (sulfur application method, its form and dose, the greatest effect on the yield structure components was demonstrated for the sulfur dose. The use of 40 kg S·ha-1, regardless of the form applied and the sulfur application method, resulted in significant increases in most of the characters, as compared with the control. The application of sulfur into soil showed a significantly more favorable effect on the seed weigh and number per silique and on the weight of seeds of the entire plant than the foliar application of this nutrient. The white mustard seed yield size was most correlated with the number of siliques per plant, and successively less with the thousand seed weight.

Deficit Irrigation Effects on Yield, Yield Components and Seed Production of Three Cultivas of Watermelon (Citrullus lanatus (Thunb Matsum and Nakai

Directory of Open Access Journals (Sweden)

P. Jafari

2015-09-01

Full Text Available A two-year study (2005 - 2006 was carried out to explore the effect of deficit irrigation treatments according to evaporation from a class A basin, including ET= 1 (T1, ET = 0.75 (T2, and ET = 0.5 (T3, on yield, yield components and seed yield of three varieties of watermelon (Charleston Gray, Sugar Baby and Crimson Suite in the Varamin Agricultural Research Center of Iran. A randomized complete block design with a split plot arrangement with four replications was used. The results showed that fruit yield, yield components and seed yield were not significantly different in T1 and T2 treatments in contrary to T3 treatment. Among the yield components, number of fruits per plant most suffered from the negative impact of severe water stress (T3 (1.20 fruit per plant. Rind thickness, percent soluble solids in fruit and seed yield were not affected by water stress. According to phenotypic traits, and correlation coefficients, a significant positive correlation (1% probability level was observed between the weighted average, and the number of fruit with the fruit yield. Crimson Suite cultivar produced the highest yield (2533 kg ha-1 compared to the cultivars Charleston Gray and Sugar Baby. Sugar Baby and Crimson Suite cultivars, with 311.7 and 298.2 kg ha-1, respectively, produced the highest amount of seed. Crimson Suite cultiavr had the highest percentage of soluble solids in fruit (1.35. Rind thickness in Crimson Suites, Charleston Gray and Sugar Baby cultivars were 1.35, 1.13 and 1.10 cm, respectively. The results of this study showed that under a moderate moisture stress condition (ET = 0.75, fruit and seed yield could be similar to the no-water stress conditions.

Effect of sowing dates on yield and yield components on mutant-cum-hybrid lines of bread wheat

International Nuclear Information System (INIS)

Sial, M.A.; Arain, M.A.; Dahot, M.U.; Laghari, K.A.; Naqvi, M.H.; Markhand, G.S.; Mangrio, S.M.; Mirbahar, A.A.

2010-01-01

Twenty-one stable wheat mutant lines along with four check varieties viz., Sarsabz, Kiran-95, T.J.83 and Khirman were evaluated under normal and late sowing dates. The observations were recorded on phenological, morphological and meteorological parameters. Higher yield and improvement in various yield components were recorded at normal sowing as compared to late sowing. Six mutant lines showed superiority in yield than check varieties at normal sowings while three mutants produced more yield than check varieties except Sarsabz at late sowings. At normal sowing eleven mutant lines matured earlier than all check varieties including short duration variety T.J-83 whereas two mutant lines were earlier than Sarsabz and Kiran-95 and thirteen than T.J-83 and Khirman. (author)

The effects of vermicompost and chemical fertilizers on yield and yield components of marshmallow (Altheae officinalis L.)

OpenAIRE

A.A. Sadeghi; K. Bakhsh Kelarestaghi; K. Hajmohammadnia Ghalibaf

2016-01-01

In order to investigate the effects of vermicompost and chemical fertilizers on growth characteristics, yield and yield components of marshmallow (Altheaeofficinalis L.), a field experiment was conducted as factorial layout based on a randomized complete block design with three replications at Faculty of Agriculture, Ferdowsi University of Mashhad, Iran, during growing season of 2012. Experimental treatments were designed based on 3 levels of vermicompost (0, 5 and 10 t ha-1) and 5 levels of ...

Inter cropping and population density effects on yield component ...

African Journals Online (AJOL)

Thus the objective of this study was to determine the influence of intercropping and population density on protein and oil yield components, photosynthesis of sorghum and Soybean at the canopy closure. The study was conducted at the University of Nairobi farm during the long rains. There was a significant increase in the ...

Effect of Limited Irrigation on Yield and Yield Component of Several Sweet Corn (Zea mays L.var Saccharata Varieties

Directory of Open Access Journals (Sweden)

Sh Ghazian Tafrishi

2013-08-01

Full Text Available A randomized complete block design with four replications and a split plot arrangement was conducted in 2010, in order to study the effect of limited irrigation on yield and yield component of sweet corn. Water levels were (100%, 80%, and 60% replacement of plant water requirement which served as main plots. Subplot was a factorial arrangement of three different sweet corn varieties (Merit, Obsession and KSC403 with two planting methods (raised bed and furrow planting. The evaluated traits were ear length, ear diameter, kernels number per row, seed rows per ear, kernel depth, seed thousands weight, kernel yield, shoot biomass, harvest index and Anthesis- silking interval. Results show that limited irrigation significantly decreased all measured characteristics but harvest index. Effect of varieties was significant on evaluated traits too. Kernel weight and seed depth were significantly affected by interaction between variety and planting method. The highest yield was found for 100% replacement of water requirement irrigation level whit 15.2 tones per hectare kernel weight and the lowest belongs to 60% replacement of water requirement by 8.6 tones per hectare kernel weight. Merit and KSC 403 produces the highest (15.9 ton/ha and lowest (8.8 ton/ha seed yield, respectively. Harvest index of different varieties were not affected by irrigation regime. Results show that, in whole, limited irrigation, decreased seed yield in all varieties by affecting diverse yield component.

Interaction Effects of Planting Date and Weed Competition on Yield and Yield Components of Three white Bean Cultivars in Semirom

Directory of Open Access Journals (Sweden)

A. Yadavi

2012-06-01

Full Text Available Unsuitable planting and weed competition are the most important factors that greatly reduce the yield of bean. In order to study the effect of planting date on yield and yield components of three white bean cultivars in weed infest and weed free condition a factorial experiment with randomized complete block design and three replications was carried out at Semirom in 2009. The treatments were planting date (May10, May 25 and June 9 and white bean cultivars (Shekofa, Pak and Daneshkade and two levels of weed infestation (weedy and weed free. Results showed that planting date, weed competition and cultivars had significant effects on yield and yield components of white bean. The 30-day delay in planting date reduced the number of pods per plant, seeds per pod, 100 seed weight and biological yield of white bean cultivars, 22.5, 18, 20.1 and 22.5 percent respectively. Also weed competition, reduced the number of seeds per pod, 100 seed weight and biological yield respectively by 13.5, 5.7 and 27.1 percent. Result of planting date and weed competition interaction effects indicated that the weed competition decreased grain yield (53% in third planting date more than others and delay in planting date was companion with increasing weed density and dry weight in flowering stage of bean. Also Shekofa cultivar had highest grain yield (3379 kg/ha at the first planting date and weed free condition.

Effect of Supplementary Irrigation on Yield, Yield Components and Protein Percentages of Chickpea Cultivars in Ilam, Iran

Directory of Open Access Journals (Sweden)

A. Maleki

2012-01-01

Full Text Available In order to study the effect of supplementary irrigation on yield, yield components and protein percentages of three cultivars of chickpea an experiment carried out as split plot, based on randomized complete blocks design, with three replications in Ilam, in 2009-2010 growing season. Irrigation treatments were: control, without irrigation (I0, irrigation at the stage of %50 blooming, irrigation at the stage of %50 flowering, irrigation at the stage of pods filling, which were allocated to main plots and genotypes, ILC482, Filip93-93 and local variety to sub plots. Irrigation treatments had significantly effect on seed and biological yields, harvest index, pod numbers per plant, seed numbers per pod and 100 seed weight. The Filip93-93 produced highest (1140.51 kg/ha and the local variety lowest seed yields (1056.98 kg/ha.Irrigation at the stage of pod filling and blooming increased by seed yield %41.3 and %29.3 respectively as  compared to control .Irrigation at the pod filling period produced the highest seed yield. The Filip93-93 produced highest yield (1263.31 kg/ha when the field irrigated at pod filling stage and the local variety at control treatment (without irrigation the lowest seed yield (893.26 kg/ha.

PATH COEFFICIENT ANALYSIS OF SEVERAL COMPONENTS OIL YIELD IN SUNFLOWER (HELIANTHUS ANNUUS L.

Directory of Open Access Journals (Sweden)

A. MIjić

2006-06-01

Full Text Available The objective of investigation was to analyse oil yield components and their relations by simple coefficient correlations as well as direct and indirect effects to oil yield by path analysis. Twenty-four sunflower hybrids were included in the investigation and their seven traits (plant height, head diameter, 1000 seed weight, hec- tolitar mass, grain yield, oil content and oil yield. Very strong positive correlation was estimated between grain yield and oil yield, strong positive correlation between hectolitar mass and oil yield, and middle corre- lation among oil yield and: 1000 seed weight, plaint height and oil content. There was no correlation between grain yields and oil content. Grain yield showed the strongest effect to oil yield. Oil content had lower effect to oil yield. Other traits showed no significant effect to oil yield, and their effect to oil yield was covered by indirect effect of grain yield.

Gamma radiation induced mutant for improved yield components in sunflower

International Nuclear Information System (INIS)

Elangovan, M.

2001-01-01

Sunflower has become an important oilseed in the Indian vegetable oil pool following its introduction from Russia in 1969. It can be used for all quality products useful to humans. The need for genetic variability and new useful gene sources has necessitated that sunflower breeders and geneticists utilize a wide range of germplasm in their breeding programmes. The induction of mutations in sunflower by physical and chemical mutagens has been practiced quite intensively in the last two decades. The results recorded to date suggest that utilization of mutagenesis could be a great advantage in improving the sunflower crop. An induced mutation programme was undertaken to generate variability in the variety 'Morden' using gamma rays. The certified and genetically pure seeds were irradiated with 50, 100, and 150 Gy gamma rays and used for further studies. Selection in M 2 generations, raised from different treatments, revealed the presence of an erectophylly leaf mutant from 50 Gy treatment. The isolated mutant showed improved yield components like head diameter, 100- seed weight and yield per plant. The mutant was a plant with short petiole length and erect leaves. This type of leaf get sunlight throughout the day. From morning to afternoon, the first half of the leaf gets sunlight, and from afternoon to evening the second half of the leaf gets sunlight. As a result of getting sunlight the whole day, the plant had more photosynthetic products and grew vigorously. Plant height, head diameter and 100-seed weight had direct effect on seed yield, and the number of leaves and stem diameter influenced the seed yield indirectly. In the M 3 generation, the mutant showed an almost two-fold increase over the parent variety for all investigated characters, except that of the yield per plant where there was a three-fold increase. The present investigation has shown that there are remarkable possibilities of increasing the yield components in sunflower by induced mutations

Effect of Different Levels of Sulphur Bentonite on Yield and Yield Components of Canola (Brassica napus L.

Directory of Open Access Journals (Sweden)

B Rahimi

2013-04-01

Full Text Available In order to determine the effect of different levels of sulfur bentonite on yield and yield components of canola a factorial experiment was conducted on the basis of randomized complete block design with three replications in Mashhad in 2009-2010 growing season. Factors included four levels of sulfur bentonite (0, 300, 400 and 500 kg.h-1 and two varieties of canola (Modena and Zarfam. The result showed that the increase in sulfur increased some vegetative traits such as leaf area index and plant height. Using sulfur caused increased pod number, seed weight, in addition of oil and protein content and seed yield. Grain yield increase was due to seed weight and LAI. Two varieties were different to responses the sulfur. While in no sulfur application there was no significant difference in seed yield, in 500 Kg sulfur application yield of Zarfam compared to Modena increased about 29.63. According to the results there are significant differences between cultivars in terms of response to the sulfur fertilizer. Therefore it is necessary to evaluate effect of sulfur application of canola productivity in different climate conditions of Iran.

Effect of Irrigation with Wastewater and Foliar Application of Complete Fertilizer on Forage Yield and Yield Components of Foxtail Millet (Setaria italica

Directory of Open Access Journals (Sweden)

A Ahmadi Aghtape

2013-08-01

Full Text Available In order to study effect of irrigation with wastewater and foliar application of complete fertilizer on forage yield and seed yield and yield components of foxtail millet (Setaria italica. A split plot experiment based on randomized complete block design with three replications was conducted at the Agriculture Institute of Zabol University in year 2009. Treatments included three levels of irrigation: Irrigation with well water at all stages of grows (control, Irrigation with wastewater and tap water alternately, Irrigation with wastewater for all growing stages, as the main plot and sprayed with three levels of complete fertilizer (NATBA-LIB: Non spraying (control, sprayed with 600 and 1200 gram of complete fertilizer in each hectare, as were the subplots. Results showed that irrigation with wastewater and complete fertilizer sprayed had significant effect on all traits except leaf to stem ratio. Furthermore, among the irrigation treatments, irrigation with wastewater in total growing period, and wastewater and tap water alternately lead to significant increase in grain yield, forage yield and yield components. Among the sprayed treatments, sprayed with 1200 gram of complete fertilizer had highest forage yield and grain.

Effect of ecological management of weed control on economical income, yield and yield components of cotton (Gossypium hirsutum L.

Directory of Open Access Journals (Sweden)

A. Zare Feizabadi

2016-04-01

Full Text Available In order to compare of ecological management of weed control on economical income, yield and yield components of cotton (Gossypium hirsutum L., a Randomized Complete Block design with 12 treatments and four replications was conducted in Mahvelat of Khorasan Razavi province, Iran. Treatments consisted of weeding, harrowing, burning, two times weeding, weeding + harrowing, weeding + burning, harrowing + harrowing, harrowing + weeding, harrowing + burning, weeding+ harrowing+ burning, weed free and weedy as a check treatment. Investigated traits were plant height, number of boll in plant, 20 boll weight, 20 boll cotton lint weight, cotton lint yield per plant, cotton yield, number and biomass of weeds, outcome, net and gross income. The result showed that treatments had significant effect (p

Responsiveness of cold tolerant chickpea characteristics in fall and spring planting: II. yield and yield components

Directory of Open Access Journals (Sweden)

ahmad nezami

2009-06-01

Full Text Available Previous research in Mashhad collection chickpeas (MCC has shown that there are some cold tolerant genotypes for fall planting in the highlands. To obtain more detailed information about the reaction of these genotypes to fall and spring planting, the yield and yield component responses of 33 chickpea genotypes (32 cold tolerant genotypes and one susceptible genotypes to four planting dates (28 Sep., 16 Oct., 2 Nov., and 7 Mar. were evaluated in 2000-2001 growing season. The experiment was conducted at the experimental field of college of agriculture, Ferdowsi University of Mashhad as a split plot design with two replications. The planting dates were imposed as main plot and chickpea genotypes as subplot. Effects of planting date and genotype on percent of plant survival (PPS after winter, number. of pod per plant, 100 seed weight, yield and Harvest Index (HI were significant (p

Modelling of seed yield and its components in tall fescue (Festuca ...

African Journals Online (AJOL)

AJL

2011-10-03

Oct 3, 2011 ... Ridge regression analysis was used to derive a steady algorithmic .... included three replicates [3 × 6 = 18 plots (treatments), stochastic ..... The parameter estimates of the five seed yield components of a total of 327 samples.

Assessment of Above- and Below-ground Competition between Sesame (Sesamume indicum L. and Pigweed (Amaranthus retroflexus and Its Effects on Sesame Yield and Yield Components

Directory of Open Access Journals (Sweden)

A.J Yanegh

2013-08-01

Full Text Available This study carried out in a factorial layout on completely randomaized block design with three replications, to evaluate the above- and below- ground competition between sesame (Sesamum indicum and pigweed (Amaranthus retroflexus, and their impacts on sesame yield and yield component. The experimental treatments were all combination of crop-weed competition (shoot competition, root competition and root-shoot competition and sesame plant densitys (1, 2 and 4 plant per pot. Plants were sown in plastic pots (24 cm diameter and 28 cm height in year 2010, at feild of Ferdowsi University of Mashhad. For study the shoot competition of sesame-pigweed, the roots were separated by plastic when the pots were filled with soil before sowing the seeds. Three weeks after emerging, shoots of plants were separated vertical barrier (30 x 70 cm for studing root competition. Results showed that competition treatments had a significant effect on seed weight per plant and yield components except 1000 seed weight. Among competition produced higher yield and yield components compared to othere treatments. However, sesame and pigweed biological weight in root-shoot competition was 2.6 and 13.7 respectively, that was higher than other competition treatments and was significant. Capsule number in main and sub branches, capsule number in plant, seed number in capsule and seed number in plant in complete competition treatment was 15, 2.58, 17.5, 43.7 and 693.89 respectively, that was higher than other treatments and differences among them was significant. Sesame density also had a significant effect on seed weight per plant and yield components. When low density were used (one plant, yield and yield components was more, therefore in one plant per pot density biological weight of sesame was 3.82 gr, and in higher densities the mentioned traits decreased significantly.

Effect of Salicylic Acid on Yield, Component Yield and Essential Oil of Black Cumin (Nigella sativa L. under Water Deficit Stress

Directory of Open Access Journals (Sweden)

E. Rezaei Chiyaneh

2014-12-01

Full Text Available Since the production of medicinal plants can be influenced by environmental factors such as water limitation. In other hand salicylic acid as a plant regulator can enhance drought resistance in plants. In order to investigate the effect of different irrigation intervals on yield, yield components and essential oil of black cumin (Nigella sativa L., a field experiment was conducted a farm located in West Azerbaijan province- city Nagadeh, West- Azerbaijan, during growing season of 2011- 2012. The experiment was arranged as split plot based on a randomized complete block design with three replications. Irrigation intervals (6, 12 and 18 days and three levels of salicylic acid concentration (0, 0.5 and 1 mM considered as in main plots and sub-plots, respectively. Results showed that irrigation had significant effects on all characteristics such as Plant height, number of follicule per plant, number of seed per follicule, biological yield, grain yield, essential oil content and essential oil yield with the exception of 1000- seed weight. With increasing irrigation intervals from 6 to 18 days, plant height, number of follicule per plant, number of seed per follicule, biological yield, grain yield, essential oil percentage and essential oil yield were decreased up to 49, 52, 40, 35, 43, 20 and 55 %, respectively. In contrast, yield components and yield were enhanced up to treatments 0.5 mM of salicylic acid. Grain yield and essential oil yield with application of 0.5 mM salicylic acid increased up to 13 and 11 % compared to control, respectively. It seems that due to the limited sources of water in the region irrigation after 12 days and 0.5 mM salicylic acid concentration are suitable for black cumin grain production.

Effects of Foliar Application of Nitrogen, Zinc and Manganese on Yield, Yield Components and Grain Quality of Chickpea in Two Growing Seasons

Directory of Open Access Journals (Sweden)

B. Shirani

2015-09-01

Full Text Available To study the effects of foliar application of zinc, manganese and nitrogen on yield, yield components and grain quality of chickpea (Cicer arientinum L. two experiments, one in autumn and the other in spring were conducted at Research Farm, Shahrekord University in 2009-2010 growing season each as a randomized complete block design with three replications. The treatments were foliar application of zinc sulfate, manganese sulfate zinc sulfate and manganese sulfate mixture, nitrogen and distilled water (as control. The results showed that planting season had a significant effect on plant height, 100-seed weight and seed yield. All measured traits, except plant height, increased in winter compared to spring growing season. This increase was more than 12% for grain yield. Foliar application of nutrients significantly affected seed yield and seed yield components. Foliar application of nitrogen, presumably, through significant increase in number of pods per plant, number of seeds per plant and 100-seed weight, increased the grain yield by 6.2% compared to control. Foliar application × planting season interactions were significant for plant height and number of pods per plant. Foliar application of nitrogen caused a significant increase in grain yield and protein content. Foliar application of zinc sulphate significantly increased Zn content of grains however it did not affect seed yield. In conclusion, foliar application of nitrogen could be suggested for increasing protein and grain yield in chickpea under similar conditions to that of the present study.

Evaluation of Yield and Yield Components of Black Cumin (Nigella sativa L. under different Plant Density and Limited Irrigation Condition

Directory of Open Access Journals (Sweden)

Sh Rezvan Beidokhti

2012-10-01

Full Text Available Research on crop response to deficit irrigation is important to reduce agriculture water use in areas where water is limited resource. Using drought resistant landraces with irrigation scheduling based on phenological stages in semi-arid and arid regions may provide an opportunity to optimize irrigation efficiency and water savings in these regions. In order to evaluate of yield and yield components of black cumin under different plant density and limited irrigation condition an experiment was conducted in Research Farm of Islamic Azad University of Damghan during growing season of 2007-2008. The experimental treatments were arranged in split plots based on a complete randomized block design with three replications. The limited irrigation (based on phenological stages treatments were included: cutting irrigation at blooming (folded flowers, cutting irrigation at flowering stage, cutting irrigation at seed formation and normal weekly irrigation (control were allocated to the main plots and different plant density: 100, 150, 200 and 250 plant per square meter (m2 were allocated to sub plots. The results showed that the effect of limited irrigation, plant density and their interaction on plant height, number of follicle, follicle weight, number of seed, 1000 seed weight, seed yield, biological yield and harvest index Black Cumin. The highest yield and yield components was obtained in normal irrigation (control and 200 plant density and the lowest yield were obtained when irrigation cut at the blooming stage and 250 plant density. There was a significant correlation between seed yield and number (r=0.90, 1000 seed weight (r=0.95 and biological yield (r=0.97. Optimum plant density of black cumin was decreased under limited irrigation treatments. Under normal (control and limited irrigation, optimum plant density was 200 and 150 plant per (m2 respectively.

Effects of Drought Stress on Canola (Brassica napus L. Genotypes Yield and Yield Components

Directory of Open Access Journals (Sweden)

R Khani

2018-02-01

Full Text Available Introduction Canola (Brassica napus L. genotypes with wide adaptability to environmental conditions could play a major role in Iran’s oilseed crop production. Selection of high performing genotypes is very important for developing canola cultivation. Water stress can reduce crop yield by affecting both source and sink for assimilation. Canola yield depends on genotype and environmental conditions and response of genotypes to environmental factors. Canola genotypes response to stress depends on the developmental stage and the events occurring prior to and during flowering stage. Resistance to water stress is divided to avoidance and tolerance. Some species are tolerable against water stress. In a while, other species respond ending life cycle, falling leaves and other reactions into water stress. Therefore, investigation of canola genotypes response to water stress in phenological growth stages can be valuable in order to determine resistant or tolerant genotypes. Materials and Methods In order to study the effect of drought stress on canola genotypes yield and its components, an experiment was conducted in 2013-2014 as a split plot based on randomized complete block design with three replications at the research farm, Agricultural and Natural Resources Research Center of East-Azarbaijan, Tabriz-Iran. Three levels of drought stress were considered as main plot (No-stress, stress at the flowering and pod setting growth stages and 18 canola genotypes including HW113, RS12, Karaj1, KR18, L73, L72, HW101, L146, L210, L183, SW101, L5, L201, HW118, KR4, Karaj2, Karaj3 and KS7 as subplots. Flood irrigation was scheduled at 50% field capacity, 30 and 30% field capacity for no-stress, stress at the flowering and pod setting growth stages, respectively; i.e. soil moisture capacity was maintained at 30% by irrigating to 100% field capacity when available moisture reached 30% in drought stress treatments. An ANOVA was conducted using the PROC-GLM procedure

Effect of Mycorrhizal Fungus (Glomus spp on Wheat (Triticumaestivum Yield and Yield Components with Regard to Irrigation Water Quality

Directory of Open Access Journals (Sweden)

S Habibi

2016-02-01

Full Text Available Introduction Decrease in water quality affected by salinization of the water resources due to the drought is one of the limiting factors of plant production. Using mycorrhizal fungi is an important approach to deal with damaging effects during stress conditions. The symbiosis of arbuscular mycorrhiza (AM with the host plant and hence, the production of a very extensive network of hypha, enhances nutrient acquisition and improves water uptake in the host plant. The specialized network of hypha raises the uptake and translocation of nutrients to the plant, whereas it inhibits high uptake of Na and Cl and their transport to plant shoots compared with plant roots. Hence, AM can alleviate the stress of salinity on plant growth and increases their tolerance to the stresses. Materials and Methods In order to evaluate the influence of mycorrhizal fungi on yield and yield components of wheat, a greenhouse experiment was conducted in research farm of Shahid Chamran Ahvaz University. Experimental design was a randomized complete block design arranged in split factorial with three replications. The factors were water salinity (water quality including filtered water (EC ≥ 1 dS m-1, tap water (EC = 1/7-3 ds m-1, tap water plus NaCl and filtered water plus NaCl (EC = 8 ds m-1. Soil sterilization included sterilized and non-sterilized soil and mycorrhizal inoculation were in five levels (non-inoculated, inoculated with ‌Glomusmosseae, G. intraradices, G. geosporum and mixture of them. Yield and yield components were measured at crop maturity and colonization percentage of root was determined at flowering stage. Root colonization by AM was determined through preparing root samples at 1 g in each experimental unit, and roots were stained using the Gridline- Intersect Method. The harvest index and mycorrhizal dependency were also measured. Salinity levels determined approximate the threshold of wheat –tolerate- salinity before the results would rather

Effects of Mineral N and P Fertilizers on Yield and Yield Components of Flooded Lowland Rice on Vertisols of Fogera Plain, Ethiopia

Directory of Open Access Journals (Sweden)

Heluf Gebrekidan

2006-10-01

Full Text Available Despite its very recent history of cultivation in Ethiopia, rice is one of the potential grain crops that could contribute to the efforts for the realization of food security in the country. However, the scientific information available with regards to the response of flooded rice to N and P fertilizers for its optimum production on Vertisols of Fogera Plain is very limited. Therefore, a field experiment was conducted on Vertisols of Fogera plain, northern Ethiopia to study the yield and yield components response of rice and to establish the optimum N and P fertilizer levels required for improved grain yield of flooded rice. Six levels of N (0, 30, 60, 90, 120 and 150 kg ha−1 and five levels of P (0, 13.2, 26.4, 39.6 and 52.8 kg ha−1 laid down in a randomized complete block design with four replications were used as treatments. Nitrogen was applied in two equal splits (50% basal and 50% at maximum tillering as urea and the entire dose of P was applied basal as triple super phosphate at sowing. The main effects of N and P fertilizer levels showed significant differences (P ≤ 0.01 for all yield and yield components studied. The effects of N by P interaction were significant only for grain yield (P ≤ 0.05, number of panicles per m2 (P ≤ 0.01, number of spikelets per panicle (P ≤ 0.05 and plant height (P ≤ 0.01 among the different yield and yield components studied. Application of N and P significantly (P ≤ 0.01 increased grain yield of rice up to the levels of 60 kg N and 13.2 kg P ha−1. However, maximum grain yield (4282 kg ha−1 was obtained with the combined application of 60 kg N and 13.2 kg P ha−1, and the yield advantage over the control was 38.49% (1190 kg ha−1. Moreover, application of both N and P fertilizers have increased the magnitudes of the important yield attributes including number of panicles per m2, number of spikelets per panicle, panicle length, dry matter accumulation, straw yield and plant height

The effects of vermicompost and chemical fertilizers on yield and yield components of marshmallow (Altheae officinalis L.

Directory of Open Access Journals (Sweden)

A.A. Sadeghi

2016-05-01

Full Text Available In order to investigate the effects of vermicompost and chemical fertilizers on growth characteristics, yield and yield components of marshmallow (Altheaeofficinalis L., a field experiment was conducted as factorial layout based on a randomized complete block design with three replications at Faculty of Agriculture, Ferdowsi University of Mashhad, Iran, during growing season of 2012. Experimental treatments were designed based on 3 levels of vermicompost (0, 5 and 10 t ha-1 and 5 levels of nitrogen fertilizer (0, 25, 50, 75 and 100% of 200 kg N ha-1. Results indicated that applied vermicompost had significant effects on increasing leaf area, flower weight per plant and grain yield of marshmallow. Flower weight per plant and grain yield of marshmallow was increased by 2 to 3 times by applying vermicompost at 10 t. ha-1, as compared to control treatment. In addition, nitrogen fertilizer had a significant effect on increasing flower weight per plant and grain, mucilage and oil yields of marshmallow. It seems that applying vermicompost can be suitable strategy in reducing the problems caused by excessive using of chemical fertilizers.

Effect of Mycorrhiza Symbiosis on Yield, Yield Components and Water Use Efficiency of Sesame (Sesamum indicum L. Affected by Different Irrigation Regimes in Mashhad Condition

Directory of Open Access Journals (Sweden)

A Koocheki

2016-02-01

Full Text Available Introduction Plant association with mycorrhiza has been considered as one of the options to improve input efficiency particularly for water and nutrient - (Allen and Musik, 1993; Bolan, 1991. This has been due to kncreasing the absorbing area of the root and therefore better contact with water and nutrients. Inoculation with mycorrhiza enhances nutrient uptake with low immobility such as phosphorus and solphur-, improve association and could be an option to drought and other environmental abnormalities such as salinity (Rice et al., 2002. Moreover, higher water use efficiency (WUE for crops -has been reported in the literatures (Sekhara and Reddy, 1993.The sustainable use of scarce water resources in Iran is a priority for agricultural development. The pressure of using water in agriculture sector is increasing, so creating ways to improve water-use efficiency and taking a full advantage of available water are crucial. Water stress reduce crop yield by impairing the growth of crop canopy and biomass. Scheduling water application is very crucial for efficient use of drip irrigation system, as excessive irrigation reduces yield, while inadequate irrigation causes water stress and reduces production. The aim of present study was to evaluate the symbiotic effect of mycorrhiza on yield, yield components and water use efficiency of sesame under different irrigation regimes in Mashhad. Material and Methods In order to investigate the impact of inoculation with two species of Arbuscular mycorrhiza fungi on yield, yield components and water use efficiency (WUE of sesame (Sesamum indicum L. under different irrigation regimes, an experiment was conducted as split plot based on a randomized complete block design with three replications during two growing seasons 2009-2010 and 2010-2011 at the Agricultural Research Station, College of Agriculture, Ferdowsi University of Mashhad.. The experimental factors were three irrigation regimes include 2000, 3000 and

Evaluation of Yield, Yield Components and Essential Oil Content of Marigold (Calendula officinalis L. with the Use of Nitrogen and Vermicompost

Directory of Open Access Journals (Sweden)

Alireza Pazoki

2016-10-01

Full Text Available Environmenal problems resulting from application of nitrogen fertilizers in the production plant materials led agricultural specialists to use clean and alternative methods to towards the organic farming and use of organic fertilizers. In this study, thus, the effect of nitrogen and vermicompost fertilizer rates on yield, yield components, essential oil content and some morphological traits of marigold was studied in a split plot experiment based on completely randomized blocks design with 3 replications in Shahr-e-Rey region during 2013 growing season. Nitrogen rates with 3 levels (0, 60, 120 and 180 kg.ha-1 were assigned to main plots and vermicompost with 3 levels (0, 10, and 20 t.ha-1 to the sub plots. Mean comparison of simple effects indicated that the plants treated with 120 kg.ha-1 nitrogen fertilizer and 20 t.ha-1 organic fertilizer vermicompost produced higher trait values under study than control (non application of vermincompost. Interaction effect of experimented factors was significant on all traits under evaluation. Thus, highest seed yield (1567 kg.ha-1, biological yield (6664 kg.ha-1 and essential oil yield (8.85 kg.ha-1 obtained by the application of 120 kg.ha-1 nitrogen fertilizer and 20 t.ha-1 varmicompost. Based on the results obtained it could be said that nitrogen and vermicompost may improve seed and biological yield and yield components of marigold.

Investigation of Tolerance, Yield and Yield Components of Wheat Cultivars to Salinity of Irrigation Water at Sensitive Stages of Growth

Directory of Open Access Journals (Sweden)

B Saadatian

2013-04-01

Full Text Available This research in order to study of tolerance ability of wheat cultivates yield and yield components to salinity of irrigation water at sensitive stages of growth, was carried out as a factorial based on a randomized complete block design with 3 replications at greenhouse of Agricultural Faculty of Bu-Ali Sina University, in 2009. Treatments were included wheat cultivars of Alvand, Tous, Sayson and Navid and salinity of irrigation water induced by sodium chloride at five levels of 0, 4, 8, 12 and 16 dS m-1. The results showed that percentage and rate of emergence, plant height, 1000-grain weight, number of seed per spike, number of spike per pot, biological and grain yield reduced by increasing salinity level. At all stress levels Navid cv. had highest emergence percentage. In non-stress and 4 dS m-1, Alvand cv. and at higher levels of stress, Tous cv. had high height in reproductive phase. At control and 4 dS m-1, Sayson cv. and at 8, 12 and 16 dS m-1, Tous cv. in majority of yield and yield components traits had significant superior than other cultivars. Tolerance index of Sayson cv. at 4 and 8 dS m-1 was more than other cultivars but at 12 and 16 dS m-1, maximum value of this index was belonged to Tous cv. At all salinity levels, Alvand cv. had least tolerance index to stress. Number of spike per pot had maximum direct effect on grain yield of wheat cultivars in stress condition. Also indirect effect of biological yield via number of spike per pot than other its indirect effects, had maximum share in wheat seed yield.

VARIABILITY OF YIELD AND YIELD COMPONENTS IN “EGUSI ...

African Journals Online (AJOL)

journal

Estimate of expected genetic advance in seed yield plant-1 ranged between. 25.90-48.40%. ..... values in fruit and seed yield characters have been reported in culinary melon, ... and Khund, A. 2004. Extent of heterosis and heritability in some.

Effects of Plant Density on Sweet and Baby Corn (Hybrid KSC 403 Yield and Yield Components

Directory of Open Access Journals (Sweden)

H Bavi

2016-07-01

GlM procedure. Means of all treatments were comprised using least significant difference (LSD at 5 % probability level. Results and Discussion The effects of plant density on yield components of baby corn was significant. Increasing the plant densities increased the ear number and percentage of non-standard ears. The Highest yield of ear without husk, standard and non-standard were obtained (2649.5, 766.97, and 3043.9 kg.ha-1, respectively with 13 plants.m-2. In sweet corn, increasing plant density from 7 to 13 plants.m-2, decreased row per ear, grain per row and thousand grain weight. Highest grain yield (1232.5 kg ha-1 and green ear (12607.2 kg ha-1 of sweet corn were obtained with plant density of 9.m-2. Conclusions Analysis of correlation showed that in both baby and sweet corn, there were positive and significant correlations between yield and its components. There was the high number of non-standard ears in all experimental treatments. In sweet corn, the standard ear without husk yield has positive and significant correlation with all traits except the percentage of standard ear and sheathed ear weight. In addition, unsuitable climate conditions during silking stage reduced the yield of sweet corn through the high number of aborted florets. Yield of sweet corn yield showed negative and significant correlation with grain row per ear and grain per row. However, increasing the ear number.m-2 increased yield in higher plant densities up to 9 plant.m-2 density. Generally, the baby corn had high yield with good quality in this region, but, standard ear percent of the baby corn of the hybrid KSC 403 was very low. On the other hand, sweet corn grain yield was low due to high air temperatures during pollination and maturity stages.

Yield and Yield Components of Vetch (Vigna radiata as Affected by the Use of Vermicompost and Phosphate Bio-fertilizer

Directory of Open Access Journals (Sweden)

Mohammad Mehdi Rahimi

2016-06-01

Full Text Available To evaluate the effects different levels of phosphate biofertilizer barvar-2 and vermi compost on yield and yield components of vetch plant (Vigna radiata L.in Yasouj a factorial experiments was performed in completely randomized design in crop year of 2013. Experimental treatments were phosphate biofertilizer barvar-2 at 3 levels (0, 50, 100 gram per hectare and vermicompost at 4 levels (0, 10, 20, 30 ton per hectare. In this study stem height, root length, biological yield, seed yield and harvest index was measured. ANOVA and comparison of means showed that vermicompost significantly increased stem height, economic and biological yields. Results, also, indicated that highest yield and biomass, 4.3 and 18.8 g/plant, observed respectively when 100 g/ha of barvar-2 and 30 t/ha of vermi compost were used. Using both of phosphate biofertilizer barvar-2 and vermicompost was better than their individnal usage. This indicates that combined use of these 2 factors would produce higher yield. It can be concluded that application of 100 g/ha of barvar-2 and 30 t/ha of vermicompost would a proper recommendation.

The effects of nitrogen rates on phenology and yield components of ...

African Journals Online (AJOL)

The effects of nitrogen rates on phenology and yield components of early maturing maize cultivars. DT Gungula, AO Togun, JG Kling. Abstract. No Abstract. Global Journal of Pure and Applied Sciences Vol. 13 (3) 2007: pp.319-324. Full Text: EMAIL FULL TEXT EMAIL FULL TEXT · DOWNLOAD FULL TEXT DOWNLOAD ...

Effect of Foliar Application of Iron, Zinc and Manganese Micronutrients on Yield and Yield Components and Seed Oil of Pot Marigold Calendula officinalis L.

Directory of Open Access Journals (Sweden)

E. Rezaei Chiyaneh

2016-02-01

Full Text Available Although micronutrients effect on growth and yield of different plants has been intensively investigated, but there is limited information on its effect on grain yield and seed oil content of pot marigold Calendula officinalis L.. In order to investigate the effects of micronutrients (Fe, Zn and Mn spraying on yield and yield components and seed oil of pot marigold, a field experiment was conducted based on randomized complete block design with three replications at the Research Farm of Payame Noor University of Nagadeh in 2010. Treatments included Fe, Zn, Mn, mixed solutions of these elements (Fe+Zn, Fe+Mn, Zn+Mn, Fe+Zn+Mn and control (water. Treatments were applied in 2 g/litter twice at stem elongation and early flowering stages. Different traits such as plant height, number of capitol per plant, number seed per capitol, thousand seed weight, biological yield, seed yield, seed oil percentage and oil Yield were recorded. The results showed that foliar application of micronutrients had significant effects on all of these traits. Yield components, seed yield, oil percentage and yield were enhanced by foliar application, compared with control (untreated plants. The maximum number seed per capitol, thousand seed weight and biological yield were relevant to Fe treatment. The highest numbers of capitol per plant and seed yield (643.33 kg.ha-1 were relevant to Zn+Fe treatment and the maximum oil yield (124.20 kg.ha-1 was produced by Zn+ Fe+ Mn treatment. Seed yield and oil yield increased by 31.27% and 44.18% yields more than control, respectively. It can be concluded that, foliar application of micronutrients had positive effects to obtain high yield and oil of pot marigold.

Effect of irrigation and nitrogen fertilizer levels on yield and yield components of dill (Anethum graveolens L.

Directory of Open Access Journals (Sweden)

S. Madadi Bonab

2016-05-01

Full Text Available In order to investigate the effect of irrigation and nitrogen fertilizer on yield and yield components of (Anethum graveolens L., a field experiment was performed in Agricultural Research Farm of the University of Tabriz, Iran, during growing season of 2009-2010. The experiment was carried out as split plot based on randomized complete block design with three replications. Irrigation treatments (irrigation after 70, 100, 130 mm evaporation from class A pan and nitrogen levels (0, 40, 80, 120 kg.ha-1 were allocated to main and sub-plots, respectively. The results showed that nitrogen fertilizer had significant (p≤0.05 effect on minor diameter umbrella, 1000-seed weight, seed yield and harvest index. However, irrigation and effect between irrigation and nitrogen were not affected any of the traits. The greatest minor diameter umbrella was obtained with control nitrogen treatment and maximum 1000-seed weight, harvest index and seed yield were obtained from 40 kg.ha-1 nitrogen. There was no any significant difference between 40 and 80 kg.ha-1 nitrogen levels. Therefore, it seems that for producing the highest yield application of 40 kg.ha-1 nitrogen is suitable. As water deficit no significant effects on this traits, of dill, it can be concluded that dill is a tolerant plant to drought stress.

The effect of melliferous bee (Apis mellifera carnica poll and mechanical means on seed yield, yield components and quality of alfalfa seed (Medicago sativa L

Directory of Open Access Journals (Sweden)

Jevtić Goran

2005-01-01

Full Text Available Number of alfalfa pollinators in free pollination was investigated as well as effect of measures that promote pollination alfalfa (using sugar syrup and mechanical means. In first year of investigations, with higher precipitation, higher number of others pollinators (80,8 then honeybees (45,6 on alfalfa field was determined. In second year, there were much more honeybees (139,5 then all others alfalfa pollinators (12,37. Pollination improvement with sugar syrup had positive effect on seed yield and seed yield components since by this way more seeds were obtained compare to free pollination and by using mechanical means. Highest seed yield was obtained with sugar syrup (44,90 gm-2, with mechanical improvement of pollination 40,74 gm-2 and in free pollination 30,41 gm-2. As for yield components pollination improvement gave better results compare to free pollination. Pod setting and number of seeds per pod were especially significant compare to control. There were no statistically significant differences between free pollination and improved pollination for seed quality components (mass of 1000 seeds, energy of germination and germination ability.

Evaluation of symbiosis with Mycorhizzal on yield, yield components and essential oil of fennel (Foeniculum vulgare Mill. and ajowan (Carum copticum L. under different nitrogen levels

Directory of Open Access Journals (Sweden)

J. Shabahang

2016-05-01

Full Text Available In order to investigate the effects of mycorrhiza symbiosis and different nitrogen levels on yield, yield components and essential oil content and yield of fennel (Foeniculum vulgare Mill. and ajowan (Carum copticum L., a field experiment was arranged in a factoriel based on a randomized complete block design with three replications at the Agricultural Research Station, Ferdowsi University of Mashhad during growing season 2009-2010. The first and the second factors were inoculation with mycorrhiza (with and without inoculation and nitrogen levels as Urea (0, 50 and 100 kg.ha-1, respectively. Inculated soil with 200 g mycorrhiza (Glomus intraradaices was applied at planting time. Urea was used in two stages such as plating time and one month after that. Ceriteria such as yield components (including number of branch, umbel, umbellet, seed and seed weight, biological and seed yield, harvest index and essential oil content and yield of fennel and ajowan were measured. Results showed that yield components, seed yield, biological yield, harvest index, essential oil content and yield of fennel and ajowan were affected by mycorrhiza and nitrogen level. Mycorrhiza increased fennel and ajowan seed yield (with 35 and 85%, respectively and essential oil content (with 34 and 30%, respectively. The highest and the lowest 1000-seed weight of fennel and ajowan obsevered in inoculation (2.9 and 0.3 g and control (2.1 and 0.2 g, respectively. Nitrogen improved all growth characteristics and decreased essential oil content. There were not significant differences between mycorrhiza and nitrogen interaction. Inoculation with mycorrhiza enhanced root development and hence availability of nutrients, particularly phosphorus. Also, nitrogen is the cause of increasement of photosynthesis rate and duration which promote growth and yield, but it declined essential oil content of two species.

Estimation of variation and correlation analysis for yield components in black currant cultivars

Directory of Open Access Journals (Sweden)

Rakonjac Vera

2015-01-01

Full Text Available Creating genotypes that will be characterized by high yields, good quality and other favorable agronomic characters is a major objective of most currant breeding programs worldwide. For easier and faster achievement of these goals and identification of superior genotypes suitable for use as parents in future hybridization programs, study of genetic parameters seems to be obligatory. In this regard, the aims of our study were to estimate components of variability and heritability, and do correlation analysis for yield components in order to determine efficient strategies for improving yield in black currant breeding programs. Significant differences between cultivars were established for all studied traits. A high proportion of genotypic variance was found with bush width, no. of shoots per bush, bunch weight and berry weight indicating that genetic improvement for these traits through breeding was achievable. Opposite, seasonal variance was high for bush height, no. of bunch per bush and yield. The high heritability coefficients (0.80-0.94 detected for all traits studied reflect the close agreement between their phenotypic and genotypic values. Also, most pairs of traits were similarly correlated at both phenotypic and genotypic levels. So, yield was significantly and positively correlated with bush height, no of bunch per bush and bunch weight. These results imply a rapid response of black currants to selection. [Projekat Ministarstva nauke Republike Srbije, br. 46013 i FP7 Project AREA 316004

Response of maize varieties to nitrogen application for leaf area profile, crop growth, yield and yield components

International Nuclear Information System (INIS)

Akmal, M.; Hameed-urRehman; Farhatullah; Asim, M.; Akbar, H.

2010-01-01

An experiment was conducted at NWFP Agricultural University, Peshawar, to study maize varieties and Nitrogen (N) rates for growth, yield and yield components. Three varieties (Azam, Jalal and Sarhad white) and three N rates (90, 120, 150, kg N ha/sup -1/) were compared. Experiment was conducted in a Randomized Complete Block design; split plot arrangement with 4 replications. Uniform and recommended cultural practices were applied during the crop growth. The results revealed that maize variety 'Jalal' performed relatively better crop growth rate (CGR) and leaf area profile (LAP) at nodal position one to six as compared to the other two varieties (Sarhad white and Azam). This resulted higher radiation use efficiency by the crop canopy at vegetative stage of development and hence contributed higher assimilates towards biomass production. Heavier grains in number and weight were due to higher LAP and taller plants of Jalal which yielded higher in the climate. Nitrogen applications have shown that maize seed yield increase in quadratic fashion with increased N to a plateau level. Considering soil fertility status and cropping system, the 150 kg ha/sup -1/ N application to maize variety Jalal in Peshawar is required for maximum biological and seed production. (author)

Effect of irrigation water salinity and zinc application on yield, yield components and zinc accumulation of wheat

Directory of Open Access Journals (Sweden)

mohamad ahmadi

2009-06-01

Full Text Available Salinity stress is one of the most important problems of agriculture in crop production in arid and semi arid regions. Under these conditions, in addition to management strategies, proper and adequate nutrition also has an important role in crop improvement. A greenhouse experiment was conducted to study the effect of 4 different irrigation water salinities (blank, 4, 8 and 12 dS m-1, prepared with 1:1 molar ratio of chlorides of calcium and sodium and magnesium sulphate salts. and 5 different zinc applications (0, 10, 20, 30 mg Kg-1 soil and foliar application of salt of zinc sulphate on yield, yield components and zinc concentration of wheat, using a completely randomized design, factorial with three replications. Plant height, spike length, 1000 grain weight, number of grain per spike, grain and straw yield was decreased by Irrigation water salinity. And all of these parameters were improved by zinc application except 1000 grain weight. Zinc absorption and concentration in straw and grain was decreased by Saline water compared to blank. And concentration of zinc significantly was increased in straw and grain by increase zinc application. The results indicated that, zinc application under low to medium salinity conditions improved growth and yield of wheat due to decreasing the impacts salinity.

Response of Yield and Yield Components of Tef [Eragrostis Tef ...

African Journals Online (AJOL)

The partial budget analysis also indicates that applications of 46 kg. N ha-1 and 10 kg P ha-1 are ..... (1994) indicated that where the grain yield response is negative, yield reduction is primarily caused by a .... An Economic Training. Manual.

Effect of Drought Stress onYield and Yield Components of Sesame cultivars under Kerman conditions (Sesamum indicum L.

Directory of Open Access Journals (Sweden)

S Farahbakhsh

2015-04-01

Full Text Available To investigate effects of drought stress on yield and yield components of sesame in Kerman region a split-plot experiment based onn compelet randomised block design with three replications was carried out in 1388. Irrigation levels (Normal irrigation in all growth stages, witholding water after 50% flowering, witholding water after 50% pod setting and differen t sesame landraces (Jiroft, Shiraz, Ardestan, Dezful, Shahr babak, Gorgan, Sirjan, Markazi, Birjand and Orzueieh were considered as main plots and sub-plots respectively. Plant height, the biggest pod length, noumber of grain per pod, noumber of pod per plant, grain weight per plant, thousand grain weight and grain yield were the measured traits. Results showed all the measured traits were significantly affected by the irrigation treatments. The effects of different landraces on all traits except noumber of grain per plant were significant. Irrigation × landraces interaction affected all measured traits except the biggest pod length significantly. The highest grain yield was recorde for Markezi landrace (845.2 kg –ha under normal irrigation and the lowest one was obtained from Jiroft landrace (104.8 kg –ha with witholding irrigation after 50% flowering.

Inheritance of grain yield and its correlation with yield components in ...

African Journals Online (AJOL)

SAM

2014-03-19

Mar 19, 2014 ... 7 × 7 incomplete diallel cross of seven wheat parents during the crop season of 2009 to 2010. Mean square of general ... Genetic background and yield traits of the seven parents. Parent. Pedigree. Released year ..... Correlation and path analysis for yield and yield contributing characters in wheat (Triticum ...

Response of yield and yield components of rice (Oryza sativa L. cv. Tarom Hashemi in rice, duck and Azolla (Azolla sp. farming

Directory of Open Access Journals (Sweden)

M Gharavi Baigi

2016-05-01

Full Text Available In order to evaluate the yield and yield components of rice (Oryza sativa L. cv. Tarom Hashemi in integrated rice, duck and Azolla, an experiment was conducted at the Research Farm of Sari University of Agricultural Sciences and Natural Resources during 2012. Experiment was arranged in split plot based on a randomized complete block design with three replications. The number of ducks as main plots at four levels (0, 400, 800 and 1200 ducks.ha-1 and Nitrogen source as sub plots at four levels (without Azolla and nitrogen, Azolla, Azolla+nitrogen and nitrogen were the treatments. Analysis of variance showed highly significant differences for the number of ducks, Azolla+nitrogen and their interaction effects of plant height, number of tillers.plant-1, number of panicle.plant-1, number of grains.panicle-1, panicle weight, panicle dry weight and grain yield. The results revealed that the highest values of plant height (133 cm, number of tillers (38 tillers.plant-1, number of panicle (24 numbers.plant-1, number of grains (171 numbers.panicle-1, panicle weight (23 g, panicle dry weight (13 g and grain yield (4 t.ha-1 were recorded in 1200 duck pieces per hectare while treated with Azolla (500 g.m-2 and nitrogen (50 kg.ha-1. In conclusion, results of the current experiment showed that increasing of duck number from 400 to 1200 pieces.ha-1 along with Azolla and nitrogen could enhance the yield and yield components of rice (Tarom Hashemi cultivar.

Genetic Analysis of Seed Yield Components and its Association with Forage Production in Wild and Cultivated Species of Sainfoin

Directory of Open Access Journals (Sweden)

A. Najafipoor

2017-02-01

Full Text Available Little is known about genetic variation of seed related traits and their association with forage characters in sainfoin. In order to investigate the variation and relationship among seed yield and its components, 93 genotypes from 21 wild and cultivated species of genus Onobrychis were evaluated using a randomized complete block design with four replications at Isfahan University of Technology Research Farm, Isfahan, Iran. Analysis of variance showed that there was significant difference among genotypes, indicating existence of considerable genetic variation in this germplasm. Panicle fertility and panicle length had the most variation in cultivated and the wild genotypes, respectively. Results of correlation analysis showed that seed yield was positively correlated with number of stems per plant and number of seeds per panicle and negatively correlated with panicle length and days to 50% flowering. Seed yield had positive correlation with forage yield in wild species while this correlation was not significant in cultivated one. Cluster analysis classified the genotypes into three groups which separate wild and cultivated species. Based on principal component analysis the first component was related to seed yield and the second one was related to components of forage yield which can be used for selection of high forage and seed yielding genotypes.

The Effect of Vesicular Arbuscular Mycorrhizal (VAM on Yield and Yield Components of Three Sorghum (Sorghum bicolor Cultivars

Directory of Open Access Journals (Sweden)

A. Mehraban

2012-10-01

Full Text Available To evaluate the influence of vesicular arbuscular mycorrhizal (VAM on yield and yield components of three sorghum cultivars, a factorial experiment based randomized complete block design with four replications was carried out in 2007, at the Agricultural Research Center of Zahak, Iran. The treatments were different mycorrhiza species in three levels: without mycorrhiza (M1, Glomus etanicatum (M2 and G. mosseae(M3 and three cultivars of sorghum: local cultivars (C1, KGS25 (C2 and KGS29 (C3. The results showed that all of the traits measured were increased by inoculation of cultivars with mycorrhiza. The highest plant height (165.1 cm, stem diameter (1.61 cm, flag leaf length (27.22 cm, flag leaf width (3.67 cm and ear width (5.00 cm was obtained by inoculation of seed with Glumus etanicatum, and highest ear length (19.21 cm, ear number (2.51, seed number per ear (10252.11, 1000-seed weight (17.56 g and grain yield (1967.32 kg/ha by using Glumus mossea. The highest leaf width and length belonged to local cultivar, and the highest seed yield to KGS 29 cultivar. However, differences of other traits among sorghum cultivars were not significant. Based on the experimental results it can be concluded that highest grain yield may be obtained by inoculating seeds of KGS 29 with Glumus mossea.

Effect of Coated Urea Fertilizer on Yield and Yield Components of Sweet Corn (KSC 403 under Deficit Irrigation

Directory of Open Access Journals (Sweden)

N Farid

2017-11-01

Full Text Available This study was carried out to assess the effect of coated urea fertilizer on yield and yield components of sweet corn (KSC 403 under different irrigation regimes, in Ramin Agriculture and Natural Sciences University, Iran by using strip split plot in a randomized complete block design with four replications. Three levels of deficit irrigation (100%, 80 and 60% of calculated water requirement of sweet corn were assigned as vertical factor and six sources of urea fertilizer (without urea, un-coated urea, sulfur-coated urea fertilizer, starch-coated urea, agar-coated urea and chitin-coated urea were assigned to horizontal factor. Effects of deficit water and source of fertilizer were statistically significant on plant height, 1000 kernel weight, ear diameter, and number of rows per ear, ear yield, biological yield and harvest index. Maximum of plant height (153.23 cm, 1000 kernel weight (104.51 g, grain yield (9853.3 kg/ha and biological yield (12471.6 kg/ha were obtained in chitin coated urea fertilizer. Maximum of ear diameter (4.67 cm and number of row per ear (13.22 were achieved in agar coated urea fertilizer and that of harvest index (45.79% was indicated by starch-coated urea. Maximum of length of ear, number of kernels per row and grain yield were 23.65cm, 25.83 and 7142 kg/ha, respectively, and were obtained with the using of chitin-coated urea fertilizer and 100% water requirement. Minimum values of these traits were 13.54 cm, 5.56 and 871 kg/ha, respectively, and were obtained by using of control (no urea application and 60% water requirement. Results showed that biopolymer coated urea is potent to improve some morphological characteristics and increase grain yield of sweet corn.

Effects of Nitrogen and Phosphorous Biofertilizers on Yield and Yield Components of Corn AS71 in Dareh-shahr, Iran

Directory of Open Access Journals (Sweden)

A. Fathi

2013-11-01

Full Text Available Biofertilizers are inputs that naturally supplement replace chemical fertilizers and they are recommended in sustainable agriculture. To study the effects of biological fertilizers on yield and yield components of corn, a factorial experiment in randomized complete block design with three replications were conducted at Dareh-shahr, Iran in 2010. Biological factors were 4 levels of nitrogen biofertilizers (nitroxin, nitrokara, supernitroplus and control and 4 levels of phosphorus biofertilizers (biophosphore, phosphate fertilized 2, MC1 and control. Results showed that biological nitrogen and phosphorus fertilizers had significant effects on all traits under study. Interaction of nitrogen biological fertilizer × phosphate biological fertilizer was significant on 100 seed weight (P

Genotype x environment interactions for yield components of broomcorn [Sorghum bicolor (L. Moench

Directory of Open Access Journals (Sweden)

Sikora Vladimir

2000-01-01

Full Text Available The aim of this investigation was to study the ecological stability of yield components (weight of undressed and trashed panicle and seed weight per panicle in fourteen varieties of broomcorn. Our current varieties was compared with our old, Hungarian and American varieties. Investigations were carried out under field conditions in a micro trial set up in a randomized block design providing five replications in seven ecologically different years. Stability parameters were computed using the model of Eberhart and Russell (1966. The results of this investigation showed that the genotypes differed in stability parameters for the characters studied. Variety Sava show good stability in all growing conditions. Variety Neoplanta plus was adapted to favorable and variety Reform to unfavorable conditions. Varieties with best performances in regard to yield components did not also show best stability. .

Evaluation of Yield and Yield Components of Oilseed Rape in the Wheat-Oilseed Rape Strip Intercropping Influenced by Chemical and Biological Fertilizers

Directory of Open Access Journals (Sweden)

R Amirmardfar

2015-01-01

Full Text Available To evaluate the effects of wheat (Triticum aestivum and oilseed rape (Brassica napus strip intercropping on yield components, seed and biological yields of oilseed rape, field experiments were carried out as factorial based on randomized complete block design with three replications at Research Farm of Tabriz University, Tabriz, Iran during 2010-2012 cropping seasons. The first factor consisted of four types of wheat and oilseed rape cropping system, sole crop of oilseed rape (A1,: strip intercropping with 8:3 (A2, 12:4 (A3 and 16:5 (A4 of wheat and oilseed rape rows, respectively and the other factor consisted of two fertilizer levels, B1: 100% chemical fertilizers (urea and triple superphosphate and B2: 50% chemical fertilizers + biofertilizers (Nitrazhin and Barvar2. The results showed that strip intercropping of wheat- oilseed rape resulted in significant increase in yield components, seed yield per occupied unit area and biological yield per occupied unit area of oilseed rape as compared with mono-cropping. The number of silique per plant in intercropping systems was significantly higher than that of mono-cropping. The highest seed yield was obtained in the 16:5 rows of wheat-oilseed rape with 343.76 g.m-2 and the lowest mean was observed in mono-cropping of oilseed rape with 260.21 g.m-2. Biological yield per occupied unit area and seed yield per intercropped unit area in B1 were significantly greater than that of B2, but this treatment had no significant effect on the other traits. Because, B1 and B2 had no significant difference in seed yield per occupied unit area and due to the importance of reduction in chemical fertilizers consumption and food and environmental health care, strip intercropping of wheat-oilseed rape under 50% chemical fertilizers + biofertilizers can be recommended as a suitable cultural method.

The Effects of Different Nitrogen Sources on Yield and Yield Components of Sweet Corn (Zea mays L. saccharata

Directory of Open Access Journals (Sweden)

ali mojab ghasroddashti

2017-09-01

Full Text Available Introduction Sweet corn (Zea mays L. saccharata is one of the tropical cereals of graminae which is cultivated in order to use for ear. Nitrogen is one of the most important nutrients and key factors to achieve desirable yield. Fertilizers play a major role in crop productivity. However, nowadays, excessive use of fertilizers have been found to have a negative impact on yield and environment. Introducing new management methods based on nitrogen and water use efficiency showed some improvements in the quality and quantity of crop production in association with the health of the community. In fact, soil organic matter content should be maintained in the appropriate level to improve fertility. Using municipal solid waste compost and poultry manure are appropriate solutions. They can increase soil organic matter, modify physicochemical properties and improve crop production. Moreover, they are able to solve problems caused by the accumulation of municipal solid waste compost and poultry manure. Material and Methods In order to investigate the impact of different sources of nitrogen on yield and yield components of sweet corn, a field experiment was conducted as a randomized complete block design with three replications in Marvdasht in 2013. Treatments included different resources of fertilizer: 200 kg.ha-1 net nitrogen (T1, 300 kg.ha-1 net nitrogen (T2, 8 ton.ha-1 poultry manure (T3, 24 ton.ha-1 municipal solid waste compost (T4, 150 kg net nitrogen + 2 ton municipal solid waste compost (T5, 100 kg net nitrogen + 4 ton poultry manure (T6, 150 kg net nitrogen + 6 ton municipal solid waste compost (T7, 100 kg.ha-1 net nitrogen + 12 ton municipal solid waste compost (T8 and fertilizer free (control (T9. At the time of crop maturity, two square meters from middle of each plot were harvested to measure yield and yield components. Statistical analysis was performed using the SAS statistical software. Least significant difference (LSD test at the five

The observation of soybean yield components in Ml generation

International Nuclear Information System (INIS)

Muryono, H.

1978-01-01

Some properties of the soybean yield component in Ml generation were investigated. Soybean seed variety of Taichung were irradiated with gamma rays from the cobalt source at the Gamma Atomic Energy Research Centre, Yogyakarta. Seven different doses at 2, 4, 6, 8, 10, 12, and 14 krads were used. Subsequent growth of the irradiated seed was carried out in the field and the ages of flowering, seedling height number of pods, number of fertile and infertile pods and percentage of sterility were recorded. It was found that the significant effect on the above variables was observed due to the gamma radiation doses between 8-12 krads. (author)

Effects of Methanol Spraying on Qualitative traits, Yield and Yield Components of Soybean (Glycine max L. under Drought Stress Conditions

Directory of Open Access Journals (Sweden)

J Esazadeh Panjali Kharabasi

2017-12-01

Full Text Available Introduction Soybean (Glycin max L. is one of the most important oilseed crops in the world. It can provide oil and vegetable protein suitable for feeding humans as well as animals. The productivity Increasing of this crop in Iran has been the subject of continuous investigation over the past few years. It is well known that adequate water supply is considered as a very important factor to affect the accumulation of dry matter in the plant as well as vegetative growth of most crops. Irrigation is an important factor affecting soybean growth and yield and its related components. Exposing soybean plants to soil moisture stress at any phase of its life cycle may lead to a detrimental effect on growth, yield and its components. The methanol spraying can lead to increase in yield, expediting in maturity and reduction in drought stress impacts and water requirement of crops. Material and Methods The experiment was conducted as split plots based on randomized complete block design with three replications at the Research Farm, Faculty of Agriculture of Moghan, Iran, in 2011. Treatments included three levels of drought stress as follows irrigation after, 40 (control, 55 and 70 percentage of available soil moisture depletion as main plots, and four levels of methanol spraying including 0 (control, 7, 21 and 35 volumetric percentage as sub plots. The studied traits were included plant height, leaf area, number of pod and seed per plant, 1000 seed weight, biological and seed yield, stomatal conductance and proline contents. Statistical analysis was carried out using SAS version 9.1 software. Significant difference was set at p ≤ 0.05 by using Duncan’s multiple range test. Results and Discussion The results showed that the plant height, leaf area, number of pod and seed per plant, 1000 seed weight, biological and seed yield, stomatal conductance and proline contents as well as number of leaf per plant significantly affected by drought stress and methanol

The Effect of Rate and Application Method of Potassium on Yield and Yield Components of Cotton in Saline Condition

Directory of Open Access Journals (Sweden)

A Ardakani

2016-12-01

Full Text Available Introduction Salinity is a major abiotic stress that affects approximately 7% of the world’s total land area. Cotton (Gossypium barbadense L. is considered as one of the most important cash crops which is widely used for agricultural and industrial purposes. Although, cotton is classified as one of the most salt-tolerant major crops but its growth and development are adversely affected by soil or water salinity. Understanding salinity and fertilizer interaction can mitigate salinity stress and improving crop yield. Potassium (K is an essential nutrient that affects most of the biochemical and physiological processes that are involved in plant resistance to biotic and abiotic stresses. Proper management of K fertilizer is especially important in saline soils where K application might reduce the adverse effects of salinity on plant growth and yield. There is a little information about rate and application method of K on yield and yield component of cotton in saline condition. The objective of this study was to determine the effects of rate and application method of K on yield and yield component of cotton in soil and water saline condition. Materials and Methods The experiment was carried out at Sabzevar Agriculture and Natural Resources Research center (Haresabad, 30km southwest of Sabzevar (32◦32N, 51◦23E and 1630 above mean sea level,in 2014.This experiment was conducted as split plot design based on randomized complete block design with three replications. Factors were: K rate (75 and 150kg ha-1 Solopotash (containing 50% K2O and 18% S comprising the main plot and application method (25%at planting+25% at first flowering and 50%at early boll development (25P+25F+50B, 25%at planting+50% at first flowering and 25%at early boll development (25P+50F+25B, 25%at planting+25% at vegetative stage (5-8 leaves stage, 25% at first flowering and 25% at early boll development (25P+25V+25F+50B, 25% at planting+25% at vegetative stage and 50% at first

Evaluation agriculture morphological and analysis of yield components in twelve cañahua agreements (Chenopodium pallidicaule Aellen

Directory of Open Access Journals (Sweden)

Mayta-Mamani Adelio

2015-11-01

Full Text Available In the present investigation, they were carried out the analysis descriptive statistic, variance analysis, comparison of stockings of Duncan, multiple correlation and analysis of path coefficient, this I finish to determine the direct and indirect effects, in cañahua (Chenopodium pallidicaule Aellen. The study behaved at random under the design of blocks with four repetitions and twelve treatments (cañahua agreements, during the campaign agricultural 2009 and 2010. The results show, the grain production on the average general of 7.67 grain/plant, with a coefficient of variability of 23.1%, and with better yields they were the agreements 455, 222, ILLPA-INIA and CUPI, achieved to produce 12.28 grain/plant on the average, 10.58 grain/plant, 10.29 grain/plant and 10.16 grain/plant, respectively. Through the path analysis, selection approaches the components of yields were identified. In the agreement 455, the coefficient of determination of the system plants dear it reached 36.5%, and main yield components were constituted, number of branches, vegetable covering and height of the plant, with an association degree and direct effect of r=0.505 P=0.327, r=0.446 P=0.168 and r=0.417 P=0.196, respectively. In the agreement 222, the characters morphological that influence in the yield this explained in 40.5%, and as better yield component the number of branches has been constituted (r=0.462 (P=0.261, vegetable covering (r=0.514 (P=0.271 and height of the plant (r=0.383 (P=0.047. In the agreement ILLPA-INIA, it has been determined as better yield component, the number of branches (r=0.514 (P=0.318 and diameter of the shaft (r=0.479 (P=0.524, these characters in its group justify that the system plants defined total it was 44.7% of the direct influence. Agreement CUPI, in this cultivation the characters that influenced in the grain yield are implied in 36.4% and with better characters morphological that have been able to influence in a direct way they are

Effects of sowing dates and different fertilizers on yield, yield components, and oil percentage of castor bean (Ricinus communis L.

Directory of Open Access Journals (Sweden)

parviz rezvani moghadam

2009-06-01

Full Text Available In order to study the effects of sowing dates and different fertilizers on yield, yield components, and oil percentage of castor bean, an experiment was conducted at Experimental station, College of Agriculture, Ferdowsi University of Mashhad, Iran in years 2004-2005. The experimental treatments comprised all combinations of four sowing dates (11 April, 25 April, 8 May and 22 May and three different fertilizers (cow manure (30 tons/ha, compost (30 tons/ha, chemical fertilizers (100 kg/ha N and 250 kg/ha of super phosphate and no fertilizer as control. Different characteristics such as plant height, main inflorescence height, number of inflorescence per plant, number of secondary stems per plant, number of capsules per plant, number of grain per plant, grain weight per plant, 100 seed weight, grain yield, oil percentage and oil yield were recorded. A factorial arrangement based on a randomized complete block design with three replications was used. The results showed by delaying sowing date grain yield, seed oil percentage and oil yield were decreased, but there was no significant differences between 25 April, 8 May and 22 May sowing dates. Harvest index and 100 seed weight did not affect by neither sowing dates nor fertilizer treatments. The highest number of branches per plant, number of fertile inflorescences per plant, number of fertile capsules per plant, number of grain per plant, grain weight per plant and biological yield were obtained at 8 May sowing date on chemical fertilizer. Percentage of seed oil, grain yield and oil yield was higher at the first sowing date (11 April in compost and chemical fertilizer treatments. Keywords: Castor bean, sowing date, fertilizer, grain yield, oil percentage.

Genotypic Variation in Yield, Yield Components, Root Morphology and Architecture, in Soybean in Relation to Water and Phosphorus Supply

Science.gov (United States)

He, Jin; Jin, Yi; Du, Yan-Lei; Wang, Tao; Turner, Neil C.; Yang, Ru-Ping; Siddique, Kadambot H. M.; Li, Feng-Min

2017-01-01

Water shortage and low phosphorus (P) availability limit yields in soybean. Roots play important roles in water-limited and P-deficient environment, but the underlying mechanisms are largely unknown. In this study we determined the responses of four soybean [Glycine max (L.) Merr.] genotypes [Huandsedadou (HD), Bailudou (BLD), Jindou 21 (J21), and Zhonghuang 30 (ZH)] to three P levels [applied 0 (P0), 60 (P60), and 120 (P120) mg P kg-1 dry soil to the upper 0.4 m of the soil profile] and two water treatment [well-watered (WW) and water-stressed (WS)] with special reference to root morphology and architecture, we compared yield and its components, root morphology and root architecture to find out which variety and/or what kind of root architecture had high grain yield under P and drought stress. The results showed that water stress and low P, respectively, significantly reduced grain yield by 60 and 40%, daily water use by 66 and 31%, P accumulation by 40 and 80%, and N accumulation by 39 and 65%. The cultivar ZH with the lowest daily water use had the highest grain yield at P60 and P120 under drought. Increased root length was positively associated with N and P accumulation in both the WW and WS treatments, but not with grain yield under water and P deficits. However, in the WS treatment, high adventitious and lateral root densities were associated with high N and P uptake per unit root length which in turn was significantly and positively associated with grain yield. Our results suggest that (1) genetic variation of grain yield, daily water use, P and N accumulation, and root morphology and architecture were observed among the soybean cultivars and ZH had the best yield performance under P and water limited conditions; (2) water has a major influence on nutrient uptake and grain yield, while additional P supply can modestly increase yields under drought in some soybean genotypes; (3) while conserved water use plays an important role in grain yield under drought

Effects of Vermi-compost Fertilizer Application and Foliar Spraying on Yield and Yield Component of Isabgol (Plantago ovate L. Medicinal Plant

Directory of Open Access Journals (Sweden)

Asghar Rahimi

2017-12-01

Full Text Available Introduction Vermi-compost is the ability of some species of earthworms to consume and break down a wide range of organic residues such as sewage sludge, animal wastes, crop residues and industrial refuse. Vermi-composts are usually more stable than their parent materials with increased availability of nutrients and improved physicochemical and microbiological properties. Aerial compost tea contains high populations of live microorganism consisting of rhizobactria, trichoderma and pseudomonas species which increase the growth and yield of the plant. Acid humic is the main humic substance and the important ingredient of soil organic matter (humus which causes increase of yield and quality of crop. The aim of this research is evaluating the effect of vermi-compost and foliar application of compost tea and acid humic on yield, yield component and mucilage content of isabgol. Vermiwash as the extract of vermi-compost is liquid organic fertilizer obtained from unit of vermiculture and vermi-compost as drainage. It is used as a foliar spraying on the leaf. Vermiwash stimulate and increase the yield of crop products and foliar application of vermiwash can be caused of plant resistance to different factors and can prevent leaf necrosis. Material and Methods In order to study the effect of vermi-compost and foliar application of tea compost and acid humic on growth indices of isabgol (Plantago ovata, an experiment was conducted as a factorial based on complete randomized design with three replications in agricultural research farm at Vali-e-Asr University of Rafsanjan. Treatments were included application of vermi-compost (0 (control, 4, 8, 12 and 16 t.ha-1 and 3 levels of foliar application (distilled water as control, acid humic and compost tea. Samples for evaluating of yield, yield components and mucilage content were taken from 1 m2 area of each treatment. Tea compost solution prepared using mix of vermi-compost, acid humic, yeast and alga extract

Influence of micronutrients and their method of application on yield and yield components of sunflower

International Nuclear Information System (INIS)

Baraich, A.A.K.; Gandahi, A.W.

2016-01-01

The sunflower (Helianthus annuus L.) has been recognized as a crop with high potentials that can successfully meet future oil requirements of the country. Formulation of micronutrients (MN) based fertilizer, in terms of application rate and method, and uptake of MN by sunflower has the ability not only to ensure nutrients availability to plants particularly in MN-limiting environments but also can manipulate the environmental hazards associated with over inorganic fertilization. To support this view, clear experimental evidence is still lacking. In addition, the current experiments aimed to evaluate the influence of MN and its method of application on yield and yield components of sunflower cultivars/hybrids. Three sunflower cultivars (HO-1, Hysun-39 and Ausigold-62) along with three MN (Z, B and Fe) and two application methods (soil and foliar) were used in the experiment. Three Zn application rate (3, 5 and 8 kg ha-1) along with 0.75 kg ha-1 B and 0.30 kg Fe ha-1 were used in four combinations such as 0-0-0, 0-0.75-0.30, 0-0.75-0.30, 3-0.75-0.30, 5-0.75-0.30, 8-0.75-0.30 kg Z, B and Fe ha-1, respectively. A control (no MN) treatment was also included for comparison. Two year averaged study exhibited that foliar application of Zn, B and Fe at rate of 8-0.30-0.75 kg ha-1 increased stem girth, head diameter, number of seeds head-1, seed weight head-1, seed index, oil content and seed yield by 21%, 27%, 13%, 34%, 19%, 24 and 31%, respectively over control. Among cultivars/hybrids, the hybrids HO-1 and Hysun-39 had taller plants, seed weight head-1, seeds head-1 and earlier in flowering and maturity. Flowering and maturity was delayed in Ausi Gold-62 with higher seed index and oil content. It is concluded that foliar application of micronutrients at the rate of 8+0.75+0.30 Zn, B and Fe kg ha-1 had substantially improved yield and yield related traits of sunflower cultivars HO-1, Hysun-39 and Ausi gold-62. (author)

Effect of Dust Deposition on Yield and Yield Components of Chickpea (Cicer arietinum L. under Rain Fed and Supplemental Irrigation Conditions in Kermanshah

Directory of Open Access Journals (Sweden)

hamze felegari

2017-10-01

Full Text Available Introduction Dust storms over Middle East are one of the most important environmental and pollution problems. In order to assess the effects of dust deposition and supplemental irrigation on yield and yield components of chickpea, an experiment was conducted at the research farm of Agriculture and Natural Resources Campus of Razi University, Kermanshah, in 2013-2014 growing season based on RCDB with three replicatins. Treatments of the experiment included supplemental irrigation as the main plot factor with 2 levels (No-irrigation and irrigation at poding stage. and dust deposition as the sub plot factor with7 levels (Control, dust application at vegetative stage, dust application at poding stage, dust application at pod filling stage, Washing at the end of vegetative stage, Washing at the end of poding stage and Washing at the end of vegetative and poding stages.Supplemental irrigation and dust deposition had significant effect on yield and yield components of chickpea. Drought stress reduced yield and yield components. With dust application at vegetative stage (67.86 g.m-2, poding stage (79.37 g.m-2 and pod filling (79.52 g.m-2 seed yield reduced. With Washing leaves at the end of vegetative and poding stages seed yield (85.20 g.m-2 increased. Materials and Methods This study was conducted during 2013-2014 at the research Farm of Razi university in Kermanshah state in the west of Iran (47º 9′ E and 34º 21′ N, 1319 meters above sea level. The soil of the research area was clay loam (36.1% clay, 30.7% silt and was cultivated with chickpea previously. Treatments included supplemental irrigation as the main plot at 2 levels (control (non-irrigation and irrigation at poding stage. Other treatments included dust deposition as the sub plot at 7 levels (Control (non-treatment, dust application at vegetative stage, dust application at poding stage, dust application at pod filling stage, Washing at the end of vegetative stage, Washing at the end

The Effect of Irrigation Intervals and Arbuscular Mycorrhizal Fungi on Chlorophyll Index, Yield and Yield Components of Grain Sorghum

Directory of Open Access Journals (Sweden)

J. Hamzei

2014-08-01

Full Text Available This experiment was carried out to study the effect of irrigation intervals and arbuscular mycorrhizal fungi on chlorophyll index, yield and yield components of grain sorghum. A factorial experiment was done based on randomized complete block design (RCBD with three replications at the Agriculture Research Station faculty of Agriculture, Bu- Ali Sina University in growing season of 2011. Irrigation intervals (7, 14 and 21 days with three levels of seed inoculation (control without inoculation, inoculation with Glomus mossea and inoculation with G. intraradices were the experimental treatments. Results indicated that the effect of irrigation intervals and mycorrhizal fungi were significant for traits of chlorophyll index, percentage of root symbiosis (PRS, number of grain per panicle, 1000 seed weight, grain yield and harvest index (HI. Maximum value for each trait was observed at G. mossea treatment. G. mossea treatment in comparison with G. intraradices and control treatment can increase the grain yield of sorghum up to 6.80 and 23.10%, respectively. Also, with increasing irrigation interval from 7 to 21 days, PRS increased up to 27.9%. Maximum value for grain yield (755 g m-2 was achieved at irrigation every 14 days and application of G. mossea treatment. But, there was no significant difference between irrigation sorghum plants every 14 days and application of G. mossea and irrigation every 7 days and application of either G. mossea or G. intraradices. In general, irrigation of sorghum plants every 14 days and supplying of G. mossea can produce the highest grain yield, while decreasing water consumption for sorghum production.

Effect of Foliar Application of Phosphorus and Water Deficit on Yield and Yield Components of Winter Wheat (Cultivar Alvand

Directory of Open Access Journals (Sweden)

M. Vafapour

2011-04-01

Full Text Available In order to study the effects of foliar application of phosphorus (P and water deficit on yield and yield components of winter wheat (Triticum aestivum L., cv. Alvand, a split-plot experiment, with completely randomized blocks design and three replications, was carried out at the Research Farm of Boyer Ahmad Agricultural and Natural Resources Research Station, 13 km west of Yasouj, in 2008-2009. The main plots were irrigation at three levels (1- full irrigation (control, 2- deficit irrigation from the stem elongation to booting stage, and 3- deficit irrigation from booting stage to the end of growth period and the subplots were five levels of foliar application of P fertilizer (0, 3, 6, 9 and 12 kg/ha KH2PO4. The results showed that the effects of different irrigation regimes and foliar application of P were significant on all traits, and their interaction was significant on plant height, number of grain per spike, grain yield and biological yield. Full irrigation and foliar application of 6 kg/ha P produced the highest grain and biological yield (6000 and 14170 kg/ha, respectively and deficit irrigation from the stem elongation to booting stage without foliar application of P produced the lowest grain and biological yield (2920 and 8219 kg/ha, respectively. Foliar application of P affects significantly the evaluated traits only in drought-stress treatments and its effect was not significant in full irrigation treatment. In general, foliar application of 9 kg/ha P compensated the losses in wheat due to drought stress.

Evaluation of Yield, Yield Components and Growth Indices of Safflower (Carthamus tinctorius L. in Conventional and Organic Farming Systems

Directory of Open Access Journals (Sweden)

Mahdieh Hajghani

2017-09-01

Full Text Available Introduction Application of organic fertilizers in sustainable agriculture systems improves yield sustainability of field crop. Safflower (Carthamus tinctorius L. is native to Middle East and belongs to the Asteraceae family. It is resistant to saline conditions, water stress, and can reach the deep-lying water of soil. The humic acid (HA mentioned as an environmentally friendly, organic matter with low levels of hormonal-like compounds is useful in improving agriculture production (Samavat and Malakuti 2006. The HA influence on plant growth depends on the source, concentration and molecular weight of the substance. Vermicompost is produced by earthworms, mainly Eisenia foetida, it has higher levels of available nutrients compared to the original materials of composts produced by other methods. Recent evidences suggest that using different amounts of vermicompost increased vegetative traits and concentration of minerals in sunflower. However, there has been little discussion about organic farming of safflower. The main objectives of the present study were to determine the effect of organic treatments on yield, yield components, and growth indices of safflower and to compare it with conventional agriculture. Materials and methods This research was conducted in Agricultural and Natural Resources Research Station in Kerman, Iran during 2012–2013. It was carried out in a randomized complete block (RCB design and had three replications. The current research has been performed to investigate the effects of two different sources of organic fertilizer on spring safflower. Four levels of vermicompost (V: 0, 3, 6 and 9 t ha-1 were considered in the main plots. Liquid humic acid at four different concentrations (HA: 0, 1000, 2000 and 3000 ppm were examined and kept in the subplots. Humic acid as a foliar treatment on leaf surface was applied twice at the beginning of stem elongation and at flowering times. In this study, aimed to compare organic farming

Grapevine yield components and composition of Isabel grape produced according to the organic and conventional systems

Directory of Open Access Journals (Sweden)

Miele Alberto

2016-01-01

Full Text Available There is an increasing demand for organic grapes by the juice industry of Serra Gaúcha, Brazil. This region presents a humid and hot summer, ideal climatic conditions for the development of a number of diseases. To control such diseases and problems brought about by other organisms, growers apply pesticides on the grapevines which may leave residues in grapes. However, in general, grapes produced by organic system have lower yield, but there is a lack of research data on this subject. Thus, an experiment was carried out over three years in order to compare the yield components and the physicochemical composition of the must of Isabel grapes conducted in both production systems. When the grapes were ripe, variables related to yield components were evaluated, such as the number of clusters/vine, yield/vine and weight/cluster. Then the grapes were sampled and taken to the laboratory where they were crushed and the musts were centrifuged and analyzed. The 3-year data mean were submitted to correlation analysis and Principal Component Analysis. The results show that conventional grapevines produced 2.18 times more than organic. However, the grapes from the organic system had higher density, Brix, pH, Brix/titratable acidity ratio, P and Mg but lower K, and Ca varied little between both production systems.

Effects of Chemical and Organic Fertilizers on Growth, Yield and Yield Component of Tomato (Lycopersicon sculentum L.

Directory of Open Access Journals (Sweden)

R Mirzaei Talarposhti

2017-03-01

Full Text Available Introduction Although using animal manures and crop residues as a traditional method for increasing soil fertility and crop yield has a long history but Conventional agricultural systems rely on the use of chemical fertilizer due to its immediate availability of nutrients. In many of modern agricultural systems using chemical fertilizers as a fast and easiest way to reduce nutrient deficiency and increasing soil fertility is considered. Intensive and continuous use of chemical fertilizers leads to decreasing the stability and sustainability of agricultural systems and also poses major threat to environment and human health. Organic fertilizers have positive effects on physiochemical and biological attributes of soil and could be classified in three different groups (i.e. Animal manures, green manure and composts.Using animal manure not only increase soil fertility but also could result in increasing infiltration, aeration and water holding capacity of soil. The main role of these fertilizers is related to physical change in soil. Different types of composts such as municipal waste compost and vermicompost also have similar positive effects, but usually the farmers observe the main effect of these organic fertilizers in long term. In order to investigate the effects of different types of organic fertilizers on growth indexes, yield and yield component of tomato (Lycopersicon sculentum L. current experiment was conducted. Materials and Methods The experiment was conducted based on randomized complete block design (RCBD with three replications and six treatments in the research station of Shahid Beheshti University. The experimental treatments were: Control or no fertilizer (NF, chemical fertilizer (CF, cow manure (CM, poultry manure (PM, vermicompost (VC and municipal waste compost (MC. Considering nitrogen concentration in all of the treatments different amounts of these fertilizers were used based on nitrogen recommendation for the field, so in

GENETIC ANALYSIS OF YIELD AND YIELD COMPONENTS IN ...

African Journals Online (AJOL)

ACSS

2017-11-16

Nov 16, 2017 ... used different genotypes and the environmental conditions under which their ... and Jinks (1971):. Y = m + aa + βd + a2aa + 2aβad +β2dd … .... /plant, 100-grain weight per plant and Grain yield per plant (g) of six generations in IET6279 X IR70445-146-3-. 3 cross. Traits. Generation. Mean. Standard. Range.

Grain Yield, Its Components, Genetic Diversity and Heritability in Chickpea (Cicer arietinum L.

Directory of Open Access Journals (Sweden)

M. Kakaei

2015-09-01

Full Text Available The current research was carried out to investigate grain yield and components and their genetic diversity and heritability of some important agronomic traits, in 19 chickpea genotypes, based on a randomized complete block design with 3 replications in Research Field of Bu-Ali Sina University, Hamadan, Iran in 2011-2012 growing seasons. The ANOVA results showed that, there were highly significant differences (p < 0.01 among genotypes for the SPAD number, number of sub-branch per plant, pod number per plant, 100-kernel weight, grain yield, biological yield, and harvest index. The mean comparisons results indicated that the genotypes 14, 12, 4 and 19 (with 234.7, 240, 250.3 and 259.4 kilogram of grain yield per ha, respectively and the genotypes 18, 8, 15, and 6 (with 151.01, 167.6, 167.8 and 189 kilogram of grain yield per ha, respectively had the maximum and minimum economic yield, respectively. According to phonotypical correlation results, there were positive and significant (p < 0.01 correlations between grain yield and pod number per plant (0.623**, plant height (0.432**, harvest index (0.425** and biomass (0.349**. Step-wise regression indicated that the pod number per plant, harvest index, biomass, number of sub-branch per plant, and plant height were the most effective traits on economic yield and they explained 84.68 percent of the variation in economic yield. Furthermore, harvest index and seed number per plant had the maximum and minimum heritability, respectively, indicating that they could be hired as sources of variation for improving the grain yield and selecting superior genotypes.

Effects of sowing date and plant density on morphological triats, yield and yield components of sweet corn (Zea mays L.

Directory of Open Access Journals (Sweden)

A. Rahmani

2016-04-01

Full Text Available In order to evaluate the effect of sowing date and plant density on the morphological triats, yield and yield components of sweet corn (Zea mays L. var SC. 403 an experiment was conducted at the Khorasan Razavi Agricultural Research and Natural Resources Center, Mashhad, Iran during 2008. This experiment was carried out as split plot based on RCBD with four replications. The sowing date (14th June, 3th July and 24th July and plant densities (66600, 83300 and 111000 plants.ha-1 were arranged in main and sub plots, respectively. The results showed significant differences between different sowing dates for plant height, ear height, and no. of leaves/plant, no. of leaves above ear, stem diameter, dehusked ear yield, can grains yield, no. of grain rows/ear, ear length, ear diameter, kernel depth, no. of ear.plant-1, 1000 kernel weight, ear harvest index and plant harvest index. The highest and the lowest can grains yield with 18.27 and 0.930 ton ha-1 was belonged to 14th June and 24th July sowing date, respectively. Although, delay in sowing date, led to decrease of growth period and also decrease of temperature can lead to improper transfer of photosynthetic materials and cause to grains yield decrease. The plant density had significant effects on husked ear yield, dehusked ear yield and forage yield. The highest can grains yield was harvested from the highest plant density (8.862 t.ha-1 and the lowest can grains yield derived from the lowest plant density (66600 plants.ha-1 with 7.692 t.ha-1. Finally, the interaction of sowing date and plant density was significant only for harvest index. Therefore, the sowing date 14th June and the highest plant density (111000 plants.ha-1, is recommended for summer sowing date of sweet corn in Mashhad with maximum and better can grains production.

Stand-level growth and yield component models for red oak-sweetgum forests on Mid-South minor stream bottoms

Science.gov (United States)

Emily B. Schultz; J. Clint Iles; Thomas G. Matney; Andrew W. Ezell; James S. Meadows; Theodor D. Leininger; al. et.

2010-01-01

Greater emphasis is being placed on Southern bottomland hardwood management, but relatively few growth and yield prediction systems exist that are based on sufficient measurements. We present the aggregate stand-level expected yield and structural component equations for a red oak (Quercus section Lobatae)-sweetgum (Liquidambar styraciflua L.) growth and yield model....

Effect of Plant Density and Weed Interference on Yield and Yied Components of Grain Sorghum

Directory of Open Access Journals (Sweden)

S. Sarani

2018-01-01

Full Text Available Introduction Weed control is an essential part of all crop production systems. Weeds reduce yields by competing with crops for water, nutrients, and sunlight. Weeds also directly reduce profits by hindering harvest operations, lowering crop quality, and producing chemicals which are harmful to crop plants. Plant density is an efficient management tool for maximizing grain yield by increasing the capture of solar radiation within the canopy, which can significantly affect development of crop-weed association. The response of yield and yield components to weed competition varies by crop and weeds species and weeds interference duration. The objective of the present study was to evaluate the effect of weed interference periods and plant density on the yield and yield components of sorghum. Materials and Methods In order to study the effect of plant density and weeds interference on weeds traits, yield and yield components of sorghum (Var. Saravan, an experiment was conducted as in factorial based on a randomized complete block design with three replications at the research field of Islamic Azad University, Birjand Branch in South Khorasan province during year of 2013. Experimental treatments consisted of three plant density (10, 20 and 30 plants m-2 and four weeds interference (weed free until end of growth season, interference until 6-8 leaf stage, interference until stage of panicle emergence, interference until end of growth season. Measuring traits included the panicle length, number of panicle per plant, number of panicle per m2, number of seed per panicle, 1000-seed weight, seed yield, biological yield, number and weight of weeds per m2. Weed sampling in each plot have done manually from a square meter and different weed species counted and oven dried at 72 °C for 48 hours. MSTAT-C statistical software used for data analysis and means compared with Duncan multiple range test at 5% probability level. Results and Discussion Results showed that

Inheritance of grain yield and its correlation with yield components in ...

African Journals Online (AJOL)

SAM

2014-03-19

Mar 19, 2014 ... average yield of wheat in China is 4.75 t ha-1, which is low compared to other .... Analysis of variance for combining ability for grain yield plant-1. Source of variation ..... Hayman BI (1954). The theory and analysis of diallel crosses. .... Analysis and prospect of China wheat market in 2011. Food and Oil.

Effect of Drought Stress During Phenological Stage and Biofertilizer and Nitrogen Application on Yield and Yield Components of Corn (KSC 704

Directory of Open Access Journals (Sweden)

M. Ashkavand

2013-06-01

Full Text Available To study the effect of cutting irrigation and application of biofertilizer and nitrogen on yield and yield components of corn single cross hybrid, an experiment was carried out in Satloo Agricultural and Natural resources Research Station of west Azarbaijan, 2009-2010. This experiment was arranged as split plot based on Randomized Complete Block Design with three replications.Four irrigation factors including I1, I2, I3 and I4, respectively: cutting irrigations at stem elongation, blossom and seed filling stages and normal irrigation assigned to main plots and fertilizer treatments consisted of Nitoxin + 50% urea (F1 , Niragin + 50% urea (F2 , and without biofertilizer application + 100% urea (F3 were allocated to sub plots.Results indicated that the effect of cutting irrigations had negative and significant effects on all characteristics; Fertilizer treatments on the other hand had significant effect only on seed numbers per ear, 100 seeds weight and seed yield. The highest seed yield was obtained under normal irrigation and treatment of Nitragin + 50% urea (12320.7 kg/ha and 11100.5 kg/ha respectively.

Genome-wide mapping of transcription start sites yields novel insights into the primary transcriptome of Pseudomonas putida

DEFF Research Database (Denmark)

D'Arrigo, Isotta; Bojanovic, Klara; Yang, Xiaochen

2016-01-01

was examined using an in vivo assay with GFP-fusion vectors and shown to function via a translational repression mechanism. Furthermore, 56 novel intergenic small RNAs and 8 putative actuaton transcripts were detected, as well as 8 novel open reading frames (ORFs). This study illustrates how global mapping...... of TSSs can yield novel insights into the transcriptional features and RNA output of bacterial genomes....

SEED YIELD AND ITS COMPONENTS OF ALFALFA AS INFLUENCED BY SULFUR AND LAST CUTTING DATE

Directory of Open Access Journals (Sweden)

H. K. Khrbeet

2016-09-01

Full Text Available A field study was conducted at the experimental farm, Coll. of Agric., Abu-Ghraib, Baghdad, Iraq during the period from mid of march 2013 to end of August 2014 to investigate the effect of different levels of sulfur (0, 1, 2 and 3 ton. ha-1 and three dates of last cutting (1, 10th and 20th ,May 2014_ on seed yield and it’s components of alfalfa local cultivar, Layout of the experiment was R.C.B.D. arranged in split –plots with three replications. Sulfur levels were used as main plot and the time when last cutting occurs was sub-plot. Results, showed that addition of sulfur at level more than 1 ton.ha-1 (2, 3 ton ha-1 resulted in a significant increasment in the No. of seeds per pod, No. of pods per raceme, No. of racemes per stem, No. of stems per m-2 and seed yield kg.ha-1 . While, No. of ovules per floret, % of ovules abortion and 1000 seed weight were not significantly influenced by sulfur levels. Highest seed yield (579.4 Kg ha-1 was obtained when sulfur added at level 2 ton ha-1 . Plants, when last cutting occurred on 10th of May produced highest No. of pods per raceme, No. of stems per m-2 and seed yield (530.8 Kg h-1 . There were no significant effect of last cutting date on, No. of ovules per floret, No. of seed per pod, % of abortion and 1000 seed weight. There were high positive correlation between seed yield and each of No. of seeds per pods, No. of pods per raceme and No. racemes per stem (+0.880, +0.918 and +0.920 respectively. This result suggests that yield components may be good selection criteria for breeding seed yield of alfalfa cultivars. High seed yield can be obtained from stands received 2 ton ha-1 and last cutting occurred on 10th May.

Effect of integrated plant nutrition and irrigation scheduling on yield and yield components of maize (zea mays l.)

International Nuclear Information System (INIS)

Randhawa, M.S.; Maqsood, M.; Wajid, S.A.; Haq, A.U.

2012-01-01

Effect of three irrigation schedules (4-6 irrigations) and seven integrated plant nutrition levels (control, 125-60-62 kg N-P/sub 2/O/sub 5/-K/sub 2/O ha/sup -1/, 125-60-62 kg N-P/sub 2/O/sub 5/--K/sub 2/O ha/sup -1/ + Farmyard manure at the rate 10 t ha/sup -1/, 125-60-62 kg N-P/sub 2/O/sub 5/-K/sub 2/O ha/sup -1/ + Farm yard manure at the rate 15 t ha-1, 250-120-125 kg N-P/sub 2/O/sub 5/--K/sub 2/O ha-1, 250-120-125 kg N-P/sub 2/O/sub 5/ -K/sub 2/O ha/sup -1/ + Farmyard manure at the rate 10 t ha-1 and 250-120-125 kg N-P/sub 2/O/sub 5/--K/sub 2/O ha/sup -1/ + Farmyard manure at the rate 15 t ha/sup -1/) on grain yield and its components in maize were studied during 2009 and 2010. Plant height, number of cobs plant-1, number of grain rows cob-1, number of grains cob-1, 1000-grain weight, grain weight cob-1, grain yield, stover yield and biological yield were significantly affected by irrigation schedules and integrated plant nutrition levels during both years. The crop applied with six irrigations and fertilized by integrated application of chemical fertilizers (250-120-125 kg N-P/sub 2/O/sub 5/--K/sub 2/O ha/sup -1/) and farmyard manure (15 t ha/sup -1/) produced the highest grain yield of 8.47 t ha/sup -1/ and 8.22 t ha/sup -1/ during 2009 and 2010, respectively. (author)

Rice yield prediction from yield components and limiting factors

NARCIS (Netherlands)

Casanova, D.; Goudriaan, J.; Catala Former, M.M.; Withagen, J.C.M.

2002-01-01

This article aims to quantify growth at field level in relation to crop status and soil properties in irrigated direct-seeded rice. Forty fields were selected in the Ebro Delta (Spain). Rice growth was monitored and soil properties measured. Yield was related to soil properties by a deductive

Failure of the component additivity rule to predict gas yields of biomass in flash pyrolysis at 950 deg. C

International Nuclear Information System (INIS)

Couhert, Carole; Commandre, Jean-Michel; Salvador, Sylvain

2009-01-01

Ligno-cellulosic biomass from different sources presents variable composition. The main aim of this work was to develop a method to predict the gas yields after flash pyrolysis (and tar cracking) at 950 deg. C in an Entrained Flow Reactor of any biomass from its composition in the three main components - cellulose, hemicellulose and lignin. For this approach to be successful, three conditions need to be met: (C 1 )Pyrolytic behaviour of celluloses from different biomasses is similar, as is hemicellulose and lignin behaviour. (C 2 )There is no interaction between the components. (C 3 )Extractives and ashes have no impact on the pyrolysis process. Two approaches were chosen to investigate the condition C 1 : (i)Celluloses, hemicelluloses and lignins of various sources were pyrolysed. Results show that hemicelluloses and lignins from different sources do not form the same quantities of gases. (ii)An attempt was made to identify the gas yields of 'theoretical components' that are able to predict flash pyrolytic behaviour of any biomass. Results tend to show that this is not possible. The condition C 2 is investigated by comparing the gas yields of the components taken separately and the gas yields of mixes of the components. Two types of mixing were carried out: simple mixing and intimate mixing. Results show that interactions occur between the components during flash pyrolysis. The condition C 3 was not investigated here; it can nevertheless be concluded that the behaviour of a biomass during flash pyrolysis at high temperature cannot be predicted from its composition in cellulose, hemicellulose and lignin

The effect of sowing date and plant density on yield and yield components of safflower (Carthamus tinctorious L. in Rokh plateau .

Directory of Open Access Journals (Sweden)

seyd fazel fazeli kakhaki

2009-06-01

Full Text Available To investigate the effect of sowing date and plant density on yield and yield components of safflower ( Carthamus tinctorious as well as evaluating the possibility of the second sowing of the plant in Torbat Heidariyeh , a field experiment was conducted in Rokh, Cold Season Cereal Research Station 2005 . The experiment was conducted in split plot arrangement in complete randomized block design with four replications . Main plots were sowing date in five levels including 9 April, 10 May, 31 May, 20 June, 11 July and sub plots were plant density in three levels including 300000, 400000, 500000 plants per hectar. Some charactristics such as the number of capitulum per square meter, seed number in capitulum, seed weight, harvest index and seed yeild was evaluated.The highest seed yield was obtained in first sowing date in 3347 kg/ha and a delay in sowing date resulted a decrease in yield. The cold weather in (05/11/2005 caused flower fertility not accured, consequently, sowing was not successful . Results showed that the effect of sowing date on yield depends on the number of capitulum per unit area and the number of grains per capitulum. These two characteristics in th first sowing date in respect of the other dates were higher. The effect of density on yield was significant resulted on yield increase due to capitulum increase in unit area. As a result, the first sowing date with the highest density is recommended. However, The third and fourth sowing date can be considered as the second planting in a sequeational cropping system .

Soil Texture and Cultivar Effects on Rice (Oryza sativa, L. Grain Yield, Yield Components and Water Productivity in Three Water Regimes.

Directory of Open Access Journals (Sweden)

Fugen Dou

Full Text Available The objective of this study was to determine the effects of water regime/soil condition (continuous flooding, saturated, and aerobic, cultivar ('Cocodrie' and 'Rondo', and soil texture (clay and sandy loam on rice grain yield, yield components and water productivity using a greenhouse trial. Rice grain yield was significantly affected by soil texture and the interaction between water regime and cultivar. Significantly higher yield was obtained in continuous flooding than in aerobic and saturated soil conditions but the latter treatments were comparable to each other. For Rondo, its grain yield has decreased with soil water regimes in the order of continuous flooding, saturated and aerobic treatments. The rice grain yield in clay soil was 46% higher than in sandy loam soil averaged across cultivar and water regime. Compared to aerobic condition, saturated and continuous flooding treatments had greater panicle numbers. In addition, panicle number in clay soil was 25% higher than in sandy loam soil. The spikelet number of Cocodrie was 29% greater than that of Rondo, indicating that rice cultivar had greater effect on spikelet number than soil type and water management. Water productivity was significantly affected by the interaction of water regime and cultivar. Compared to sandy loam soil, clay soil was 25% higher in water productivity. Our results indicated that cultivar selection and soil texture are important factors in deciding what water management option to practice.

Genotypic Variability of the Components and their Effects on the Rice Yield: Correlation and Path Analysis Study

Directory of Open Access Journals (Sweden)

Sharkhawat Hossain

2008-06-01

Full Text Available Twenty modern Boro rice varieties were evaluated with a view to find variability and genetic association for grain yield and yield components characters. Genotypic and Phenotypic correlation among these characters were computed. Both genotypic and phenotypic correlation coefficients were significant between plant height and number of effective tillers per plant followed by panicle length. There was a positive significant correlation between yield and number of effective tillers per plant followed by percent filled grain per panicle. Path coefficient showed that number of effective tiller per plant and plant height are the characters that contribute largely to grain yield.

Correlation Analysis of some Growth, Yield, Yield Components and ...

African Journals Online (AJOL)

three critical growth stages which was imposed by withholding water (at ... November, 5th December, 19th December and 2nd January) laid out in a split ... Simple correlation coefficient ® of different crop parameters and grain yield ... The husk bran and germ are rich sources of ..... heat in 2009/2010 dry season at Fadam a ...

Evaluation of Relationship Between Auxin and Cytokinine Hormones on Yield and Yield Components of Maize under Drought Stress Condition

Directory of Open Access Journals (Sweden)

A Mahrokh

2016-10-01

, Karaj, Iran, in 2013. Indole-3-butyric acid and N6-benzyladenin were used as auxin and cytokinin hormones, respectively. Concentration of auxine and cytokinine hormones were 10 and 50 mg per liter, respectively. Harvesting was done from 4.5 m2 at field maturity stage with 14 % grain moisture for estimating grain yield and yield components. SAS software (version 9.1 was used for statistical analysis. Traits means were compared by Duncan's multiple range tests in 5% probably level. Results and Discussion Drought stress effect was significant (P≤0.01 for ear number per plant, row/ear, grain number per m2, 1000 kernels weight and grain yield and it wasn’t significant for kernels/row. Spraying cytokinine hormone was significant (P≤0.01 on ear number per plant, row/ear, grain number per m2 and it was also (P≤0.05 significant for 1000 kernels weight but it wasn’t significant for kernels/row and grain yield. Spraying auxine hormone was significant (P≤0.01 for1000 kernels weight and grain yield and it wasn’t significant forother yield components. The maximum yield was obtained 12.80 and 12.24 tons per hectare in non-stress environment and using auxin hormone in silk emergence stage, respectively. Grain yield was decreased 49.21% under reproductive drought stress and grain yield difference between non drought stress and vegetative drought stress was not significant. Spraying cytokinine hormone increased ear number by 10% in V8-V10 stage. The maximum row/ear was 16.16 kernels per row which was obtained by spraying cytokinine hormone in V8-V10 stage. Spraying cytokinine hormone increased grain number per m2 up to 20.75% in V8-V10 stage but it decreased 1000 kernels weight up to 13.76% in the same stage. The maximum 1000 kernels weight was 313.87 gr that was obtained by spraying auxine hormone in silk emergence stage. Spraying auxine hormone increased grain yield up to 23.38% in silk emergence stage. Conclusions Based on the results of this experiment, maize was

Microstructural origins of yield-strength changes in AISI 316 during fission or fusion irradiation

International Nuclear Information System (INIS)

Garner, F.A.; Hamilton, M.L.; Panayotou, N.F.; Johnson, G.D.

1981-08-01

The changes in yield strength of AISI 316 irradiated in breeder reactors have been successfully modeled in terms of concurrent changes in microstructural components. Two new insights involving the strength contributions of voids and Frank loops have been incorporated into the hardening models. Both the radiation-induced microstructure and the yield strength exhibit transients which are then followed by saturation at a level dependent on the irradiation temperature. Extrapolation to anticipated fusion behavior based on microstructural comparisons leads to the conclusion that the primary influence of transmutational differences is only to alter the transient behavior and not the saturation level of yield strength

Investigating the Effect of Cultivate Lines Direction, Bio-Fertilizer Nitroxin and Superabsorbent Materials on Yield and Yield Components of Broad Leaf Vetch (Vicia narbonensis

Directory of Open Access Journals (Sweden)

E Latifinia

2017-12-01

Full Text Available Introduction The excessive use of fertilizers has caused severe damages to the bio-cycle in the fields and has destroyed the sustainable agricultural machinery. These destructive effects have led to the recommended use of bio-fertilizers. Biodiversity is one of the key sources of supplying nutrients in sustainable agriculture. The use of biological fertilizers in a sustainable agricultural system leads to sustained yield in plant production. Biological fertilizer of nitroxin has increased biological yield and grain yield in fodder corn. Water shortage as a limiting factor has limited vegetation growth and development in these areas. Considering that Iran is a dry country, the use of super adsorbent is one of the ways to reduce water consumption. Investigators in the study of superabsorbent showed that superabsorbent had a significant and positive effect on the yield of forage plants. Crop directions can affect the amount of the product by increasing the leaf area and absorbing light. Proper orientation of crop lines increases the photosynthetic efficiency and increases the yield and yield components of the plant. Research has shown that yields are much higher in plants planted on the north-south lines compared with plants planted on east-west lines. Materials and Methods In order to investigate the effect of nitroxin and superabsorbent fertilizer on yield and yield components of broad leaf vetch in a research field of agricultural faculty, Lorestan University, as a split plot factorial based on a complete block design randomization was performed in three replicates. In this research, for main lines, the main factors were considered in the North-South and East-West directions in the main plots. Sub-factors In this experiment, nitroxin biosynthesis and superabsorbent materials were applied at two levels of consumption and non-consumption in sub plots. Nitroxin fertilizer was used as a seed lot at a rate of 1 liter per hectare and the stockosorb

Stability Parameters for Grain Yield and its Component Traits in Maize Hybrids of Different FAO Maturity Groups

Directory of Open Access Journals (Sweden)

Dragan Djurovic

2014-12-01

Full Text Available An objective evaluation of maize hybrids in intensive cropping systems requires identification not only of yield components and other agronomically important traits but also of stability parameters. Grain yield and its components were assessed in 11 maize hybrids with different lengths of growing season (FAO 300-700 maturity groups using analysis of variance and regression analysis at three different locations in Western Serbia. The test hybrids and locations showed significant differences in grain yield, grain moisture content at maturity, 1,000-kernel weight and ear length. A significant interaction was observed between all traits and the environment. The hybrids with higher mean values of the traits, regardless of maturity group, generally exhibited sensitivity i.e. adaptation to more favourable environmental conditions as compared to those having lower mean values. Regression coefficient (bi values for grain yield mostly suggested no significant differences relative to the mean. The medium-season hybrid gave high yields and less favourable values of stability parameters at most locations and in most years, as compared to mediumlate hybrids. As compared to medium-early hybrids, medium-late hybrids (FAO 600 and 700 mostly exhibited unfavourable values of stability parameters i.e. a specific response and better adaptation to favourable environmental conditions, and gave higher average yields. Apart from producing lower average yields, FAO 300 and 400 hybrids showed higher yield stability as compared to the other hybrids tested. Medium-late hybrids had higher yields and showed a better response to favourable environmental conditions compared to early-maturing hybrids. Therefore, they can be recommended for intensive cultural practices and low-stress environments. Due to their more favourable stability parameter values, medium-early hybrids can be recommended for low-intensity cultural practices and stressful environments.

Effects of Row Spacing and Plant Density on Yield and Yield Components of Sweet Corn in Climatic Conditions of Isfahan

Directory of Open Access Journals (Sweden)

N. Khodaeian

2013-06-01

Full Text Available To evaluate the effects of row spacing and plant density on yield and yield components of sweet corn, variety KSC403, an experiment was conducted in Research Farm of Isfahan University of Technology, Isfahan, Iran, in 2007, as randomized complete block design with a split-plot layout and three replications. The main plots were allocated to two row spacing (60 and 75 cm and the sub-plots accommodated four levels of plant density (50000, 70000, 90000 and 110000 plants per ha. There was significant increase in leaf area index, shoot dry weight, 100-grain fresh weight and grain fresh yield, as row width was decreased from 75 to 60 cm but the plant height was decreased. There was no significant effect of row spacing on number of rows per ear, number of grains per row and number of grains per ear. Plant height, leaf area index, shoot dry weight per m2 and number of ears per m2 were increased with an increase in plant density. The number of rows per ear, number of grains per row, number of grains per ear, 100-grain fresh weight and grain fresh yield were significantly higher under plant densities of 90000 and 110000 as compared to 50000 and 70000 plants per ha. There was significant interaction between row spacing and plant density for leaf area index, shoot dry weight, number of grains per ear, 100-grain fresh weight and grain fresh yield. Under all plant densities, the grain fresh yield was higher in 60-cm row width compared to 70-cm row width. However, the difference between these two row spacing was not significant in plant densities of 50000 and 110000 plants per ha. The highest grain fresh yield (33940 kg/ha was achieved under row spacing 60 cm and 70000 plants per ha and the least grain fresh yield (20750 kg/ha was obtained in under 75 cm row width and 110000 plants per ha. Considering the obtained results of this experiment, to have maximum grain fresh yield of sweet corn under Isfahan climate, the row spacing of 60 cm and plant density of

Effect of Nutritional Management on Yield and Yield Components of Roselle (Hibiscus sabdariffa as a Medicinal Plant in Mashhad Condition

Directory of Open Access Journals (Sweden)

P Rezvani Moghaddam

2018-02-01

Full Text Available Introduction Roselle (Hibiscus sabdariffa is an annual plant with a height of about 64 to 429 cm belongs to Malvaceae family. Roselle is self-pollinated and sensitive to cold. Sepals of Roselle are used in food and pharmaceutical industries. It has been reported that Roselle is not native to Iran but it is cultivated extensively in Sistan and Baluchistan province, Iran. In order to achieve high quality and quantity yield of Roselle sepal it is necessary to improve nutritional systems of plant. Proper management of soil fertility and plant nutrition can preserve environment, improve biodiversity and also increase inputs efficiency. Results showed that use of nutritional resources will improve plant growth. Organic fertilizers such as compost can improve soil fertility as an important source of food that increase yield of plants. Nabila and Aly (2002 observed that use of hen and cow manure increased plant height, number of lateral branches, numbers of fruit and sepal yield of Roselle. Each plant species has the maximum potential in favorable conditions. Therefore, evaluation the effect of climatic and agronomic factors and nutritional management for plants is essential. This experiment was conducted to evaluate the yield and yield components of Roselle in response to use of single and combined nutritional resources. Materials and Methods In order to study the effects of single and combined organic, biological and chemical fertilizers on yield and yield components of Roselle (Hibiscus sabdariffa, a field experiment was conducted with 12 treatments based on a Randomized Complete Block Design with three replications at Research Station, Faculty of Agriculture, Ferdowsi University of Mashhad, Iran, in 2013-2014. Treatments included: 1- mycorrhiza (Glomus intraradices, 2- cow manure, 3- chemical fertilizer, 4- vermicompost, 5- chemical fertilizer + cow manure, 6- chemical fertilizer + vermicompost, 7- chemical fertilizer + mycorrhiza, 8- cow manure

Effect of Row Intercropping Patterns on Yield, Yield Components, and Weed Control of Fenugreek (Trigonellafoenumgreacum L. and Anise (Pimpinellaanisum L.

Directory of Open Access Journals (Sweden)

F Mardani

2016-02-01

Full Text Available Introduction Due to population growth and food shortage agricultural production is on increasing demand. In this order increasing cultivation area and yield per unit area are two ways of obtaining higheragricultural production (20. There is another important way that without incurring additional costs and use of water and fertilizer could result in higher production. This approach is increasing agricultural production per unit area by growing more than one crop in a year. Intercropping will be successful when competition for sources issless than competition within a species. Plants in the mixture can be chosen in a way that a species benefits from environmental changes caused by other species in mixed cultures directly (7, 15. Intercropping inhibits the growth and development of weeds and leads to increased production. Since the system will reduce the pesticide use, environmental pollution will be also less proportionally (37. Materials and Methods In order to evaluate the yield, yield components and potential weeds control under intercropping fenugreek and anise, an experiment was carried out based on a randomized complete block design with three replicationsat the Agricultural Research Field of Yasouj University during growing season of 2012-2013. Treatments included pure cultures of fenugreek and anise, single-row, double-row and three-tier intercropping of fenugreek and anise at no weed control and weed control conditions. Results and Discussion The results showed that different intercropping treatments had significant effects on pod number per plant, grain weight and grain and biological yield of fenugreek and also, on number of lateral branches, number of grains per plant and grain and biological yield of anise. There were nosignificant effects on plant height, number of lateral branches, number of grain per pod, harvest index of fenugreek, as well as plant height, number of umbel let per plant, seed weight and harvest index of anise. The

Effect of Plant Growth Promoting Rhizobacteria (PGPR on Phenological Traits, Grain Yield and Yield Components of Three Maize (Zea mays L. Cultivars

Directory of Open Access Journals (Sweden)

A Soleimani Fard

2013-11-01

Full Text Available To evaluate the effect of bio-fertilize on yield and its components in maize cultivars, an split plot experiment based on randomized complete bock design with three replications in was conducted in Payam-noor University of Ilam, Iran, in 2009-2010. Treatments were cultivar (SC604, SC704 and SC807 assigned to main plots and bio-fertilizer (non- inoculation, inoculation with Azetobacter, Azospirillum and dual inoculation ofAzotobacterand Azospirillum to subplots. The effect of cultivar on days to maturity, plant height, dry matter, ear length, stem diameter, number of grain per ear row, 1000-grain weight, grain yield, biological yield and protein content was significant cultivar. SC 704 had the highest dry matter (259.5 g.m-2, plant height (201.1 cm, number of grain per ear row (42.8 grain, grain yield (10850 kg.m-2, and biological yield (22040 kg.m-2. The effect of plant growth promoting rhizobacteria on all traits expect harvest index was significant. Dual inoculation ofAzotobacterand Azospirillum had the longest days to ear initiation (71.2 days, days to maturity (115.4 day, number of leaves above ear (5.6 ear, dry matter (240.4 g.m-2, ear length (24.3 cm, plant height (212.4 cm, seed number of rows per ear (14.5 row, number of grains per row (44.2 grain, grain yield (10190 kg.m-2, biological yield (21320 kg.m-2 and protein content (10.7%. Interaction effect of cultivar× plant growth promoting rhizobacteria on grain yield was significant. The highest and lowest grain yield was obtained from SC 704 and application of dual inoculation ofAzotobacterand Azospirillum (12320 kg.ha-1 and lowest from SC 604 when inoculation treatments were not used 7570 kg.ha-1 respectively.

Researches on Determination Yield and Yield Components of Some Common Vetch (Vicia sativa L. Genotypes in Ecological Conditions of Diyarbakır

Directory of Open Access Journals (Sweden)

Seyithan SEYDOŞOĞLU

2014-09-01

Full Text Available The research was conducted to determine yield and yield components of some common vetch genotypes in order to examine some of the traits, during 2011-2013 seasons in GAP International Agricultural Research and Training Center was carried out on the experimental field. In the study, a total of 20 different genotypes were used common vetch, field trials randomized block design with 3 replications was established. In the study, herbage yield, hay yield and seed yield in addition to days to %50 flowering duration, plant height, main stem length, main stem number, pod number per plant, grain number per pod as affecting yield some properties were also investigated. In both years of the study, days to %50 flowering duration and grain number per pod characteristics examined, except among genotypes for all other parameters are determined significant differences in statistical terms. According to the average of two years result; days to %50 flowering duration, plant height, main stem length, main stem number, pod number per plant, grain number per pod, herbage yield, hay yield, seed yield, 1000 seed weight were changed between 157.8-174.0 days, 33.9-62.6 cm, 52.0-83.3 cm, 1.6-2.6 number, 13.5-21.2 number, 4.7-5.6 number, 1522.0-3232.3 kg da-1, 308.0-919.5 kg da-1, 92.2-293.7 kg da-1, 46.5-84.5 g, respectively. According to these results, under the climate and soil conditions of Diyarbakır; for the grass production common vetch genotypes "D-135" was suggested and for the seed production common vetch genotypes "IFVS-715" and "GAP-59998" were suggested.

Effect of Different Sources of Nitrogen and Organic Fertilizers on Yield and Yield Components of Ajowan (Trachyspermum ammi L.

Directory of Open Access Journals (Sweden)

zahra saydi

2017-09-01

Full Text Available Introduction Ajowan (Trachyspermum ammi L. is an annual medicinal plant of the family Apiaceae which can reach 30 -100 cm in height. and its growth is highly depended on the availability of mineral nutrients in the soil. But, it has been shown that utilization of chemical fertilizers for growth promotion of Ajown could have negative impacts on environment and ecological systems. Nowadays, sustainable agriculture is the best approach to overcome such problems and prevent the excess accumulation of chemical fertilizers deposited within the soil. Application of bio-fertilizers as an alternative to chemical fertilizers is a new sustainable approach which have been raised in the new era of Agriculture. Therefore, this study was conducted to investigate the application of various source of biological fertilizers such as Vermicompost, Alkazotplus and Humic Acid in combination with nitrogen fertilizers on growth behavior, yield and yield components of Ajowan under Ahvaz growing condition. Materials and methods This research was conducted at the Agricultural Research Station of Shahid Chamran University in 2014-2015 to determine the effects of different sources of nitrogen and organic fertilizers on the yield and yield components of Ajowan based on two way randomized complete block design with three replications. The first factor of the experiment was Application of four different nitrogen sources including: Urea (U, Sulfur-coated Urea (SCU, %50 Sulfur-coated urea (1/2 SCU + Alkazot Plus biological fertilizer and Control (no nitrogen source used. Organic fertilizers were also applied at four levels, consisting of Humic Acid, Vermicompost, %50 Vermicompost + Humic Acid and Control (no organic Fertilizer as the second factor. After soil preparation, approximately four Kg.ha-1 of the seeds were planted on the rows with 30 cm distance. Plant height, number of sub branches, number of umbels per plant, number of seeds per umbel , 1000 seeds weight, biological

Leaf-level carbon isotope discrimination and its relationship with yield components as a tool for cotton phenotyping in unfavorable conditions

Directory of Open Access Journals (Sweden)

Giovani Greigh Brito

2014-07-01

Full Text Available The initial goal of this study was to measure the efficiency of carbon isotope discrimination (Δ in distinguishing between cotton plant genotypes subjected to two water regimes. In addition, ∆ measurements, leaf water potential and gas exchange ratios were monitored. Using Brazilian breeding lines, this study also tested the usability of ∆ as a proxy for selecting high-performing yield components in cotton plants grown in unfavorable conditions, particularly water deficiency. For these experiments, ∆ and yield components were measured and their correlations analyzed. Differences among cotton genotypes for Δ (p < 0.0001 were verified, and it was found that this variable was significantly correlated with gas exchange. There was a significant positive correlation between Δ and seed cotton yield only in the site experiencing severe water deficiency (Santa Helena de Goiás. However, Δ had a significant negative correlation with fiber percentage. Our results indicate that Δ is a suitable tool for cotton phenotyping, and it may be applied in cotton breeding programs that aim to produce high-performing yield components in unfavorable conditions.

Effects on Brassica napus L. Yield and Yield Components of Super Absorbent Polymer under Different Irrigation Regimes

Directory of Open Access Journals (Sweden)

Alireza PIRZAD

2014-09-01

Full Text Available For evaluation of the effects of super absorbent polymer under different irrigation regimes on the yield and yield components of Brassica napus L., a factorial experiment was carried out, based on randomized complete block design with four replicas. Treatments included super absorbent polymer (0, 1, 2, 3, 4 and 5 g/kg soil and induced drought stress (irrigation at 25, 50 and 75 mm evaporation from class A pan. The experiment was conducted in pots with 5 kg of soil. Data analysis of variance showed the significant interaction effect between polymer and irrigation on the stem length, width and weight, the number of seeds per sheath, number of seeds per plant, the number of sterile and fertile sheath per plant, fertile sheath percentage (fertile sheath/ total sheath ×100, 1000 seeds weight, seed weight per plant, sheath weight per plant and the number of total sheath. The present study revealed that indifferent from the applied amounts of the super absorbent polymer, in all cases the measured characters have been more affected by induced drought stress.

Comparison of thermal cracking and hydro-cracking yield distributions

Energy Technology Data Exchange (ETDEWEB)

Romero, S.; Sayles, S. [KBC Advanced Technologies Inc., Houston, TX (United States)

2009-07-01

Operators of bitumen upgraders are faced with the challenge of obtaining maximum performance from existing equipment whose performance is already pushed to the limits. The main constraint is the primary upgrader processes, notably coking and hydrocracking. Under the current economic conditions, funding for new equipment is difficult. However, changes can be made to optimize unit performance by better understanding the basic kinetics in thermal cracking and hydrocracking. This paper reviewed the yield distribution differences between thermal cracking and hydrocracking to provide insight into the basic components of operational changes. The objective was to compare yields, product quality distributions and the elemental balances. The opportunities to increase production and improve performance were then analyzed quantitatively within the existing unit equipment limits. tabs., figs.

Champagne Pool (New Zealand) Thermophiles Yield Insights into the Evolution of Microbial Arsenic Resistance

Science.gov (United States)

Hug, K.; Krikowa, F.; Morgan, X.; Maher, W. A.; Stott, M. B.; Moreau, J. W.

2011-12-01

Arsenic is a highly toxic metalloid typically enriched in geothermal waters due to aqueous weathering of arsenic-bearing minerals. Investigation of enzymatic pathways by which thermophilic microorganisms cope with toxic arsenic levels may yield insights into the evolution of arsenic resistance mechanisms on the early Earth. At Wai-O-Tapu in the Taupo Volcanic Zone on the North Island of New Zealand, hot springs with temperatures of 30-90°C and elemental sulfur concentrations (expressed as equivalent sulfate) from 340 to 850 mg/l establish a range of environmental conditions. Total arsenic concentrations varied from 0.083 mg/l to 56 mg/l. Arsenic speciation analysis elucidated various biogeochemical arsenic transformations occurring within different springs. For example, in the Alum Cliff spring oxidizing conditions (Eh = 225 mV) were expected to stabilize dissolved arsenate (AsO43-). However, HPLC-ICPMS analyses yielded dissolved arsenate and arsenite (AsO33-) concentrations of 0.25 mg/l versus 43.3 mg/l, respectively, and point towards microbial arsenate reduction as the likely mechanism for arsenic redox transformation. 16S rRNA gene cloning of Alum Cliff DNA showed a predominantly archaeal population with the dominant clone "AC1_A1" most closely related (99% sequence similarity, NCBI BLAST°) to the uncultured Sulfolobus clone "ChP_97P" found in Champagne Pool (Childs et al., 2008). The closest isolated relative to AC1_A1 is Sulfolobus tokodaii str. TW with a sequence similarity of 94%. Arsenic speciation measurements from the Alum Cliff spring suggest that clone AC1_A1 features the arsenate reduction resistance mechanism, and we hypothesize therefore that an arsC (homolog or analog) provides this functionality. The organic arsenic species monomethylarsonic acid (MMA) and dimethylarsinic acid (DMA), detected via HPLC-ICPMS at concentrations ranging from 1 μg/l to 12 μg/l in various springs, may also implicate microbial methyl-group transfers as an active

Winter wheat grain yield and its components in the North China Plain: irrigation management, cultivation, and climate

Directory of Open Access Journals (Sweden)

Lihua Lv

2013-09-01

Full Text Available Irrigation has been identified as the main driving factor of groundwater drawdown in the North China Plain (NCP. In order to develop appropriate irrigation strategies for satisfactory yields of wheat (Triticum aestivum L., grain yield (GY, yield components, and water use efficiency (WUE were studied. A field experiment was conducted with two types of winter wheat, 'Shimai15' and 'Shixin733', and five irrigation treatments, including rainfed and four spring irrigation water applications, in four growing seasons (2005 to 2009. Results showed that maximum GY was achieved with three irrigation treatments in the 2005-2006 and 2008-2009 dry seasons and two irrigation treatments in the 2006-2007 normal season. However, in the 2007-2008 wet season, the four irrigation treatments, especially the additional irrigation event at the reviving stage (28, produced maximum GY. Grain yield was significantly related to seasonal full evapotranspiration (ET and 410 to 530 mm of seasonal full ET, including 143 mm rainfall and 214 mm irrigation water, which led to maximum GY. The two types of cultivars responded differently to irrigation management in different rainfall years. The yield of the water-saving cv. 'Shimai 15' was much higher in the dry seasons than in the other seasons. Variations of yield components were mainly caused by irrigation time and meteorological factors. The higher accumulated temperature during the sowing and tillering stages (24 and irrigation or precipitation at the reviving stage (28 significantly improved tiller growth. The lower average temperature in March and April greatly increased grain number per spike. Sunshine duration played a decisive role in improving grain weight. Our results provide very useful information about irrigation time and frequency of winter wheat in the NCP in order to obtain high yield but reduce the use of underground water.

Effect of Nitrogen Fertilizer on Weeds Growth and Emergence and Yield and Yield Components of Corn (Zea mays L.

Directory of Open Access Journals (Sweden)

M. Gholamshahi

2017-01-01

components of corn and weeds growth and emergence, a field study was conducted in research Station of Natural Resources Research Centre, Kerman province. Materials and Methods: This experiment was conducted using a randomized complete block design with three replications. The treatments consisted of different levels of nitrogen in four levels (0, 80, 160, 240 kg ha-1 urea fertilizer (46%. In addition, for assessment the effect of experimental treatments, each plot separated into two parts (complete control and non-control of weeds. Preparing the field was done with autumn plowing and spring disc. Corn seeds (single cross 704 were planted on rows in the spring with hand and with the density of 71000 plants per hectare with row spacing of 70 cm and 20cm. Irrigation was performed on average every7 days. Weeds in the control treatment were weeding by hand twice during the growing season. Results and Discussion: The results showed that nitrogen application in combination with weeds control increased yield and yield components of corn and the other growth traits, significantly. The maximum corn yield observed 12/8 kg under high nitrogen treatment (240 kg ha-1 with 88/82% increase compare with non-fertilizer treatment. Moreover, increase in nitrogen imposed a significant positive affect on height, yield and yield components including (Length and ear diameter and ear dry matter, the number of grains in row and the number of rows in ear, hundred grain weight. Nitrogen is one of the factors affecting the development of leaf area per plant and therefore, the development of the corn canopy. It seems that the increase of nitrogen during the tassel stage and seed formation which are the most sensitive stages to nitrogen absorption and photosynthesis, increased the length of ear. In addition, results of the experiment indicated that control of weeds had significant effect on different growth factors. Furthermore, the increase nitrogen rate caused to weeds emergence rate and dry weight

The Effect of Different Fertilizer Management on Yield and Yield Components of Black Seed (Nigella sativa L.

Directory of Open Access Journals (Sweden)

P rezvani moghaddam

2017-08-01

Full Text Available Introduction Given the importance of nitrogen for improving the quantitative and qualitative yield of crops (Rodrigues et al., 2006 and the need for application of chemical fertilizers in intensive agriculture to get the maximum production, nitrogen supply in adequate amounts by ecologically avowed resources is known as one of the main challenges during transition from conventional to organic farming (Rodrigues et al., 2006. Considering the sustainable nitrogen management, reconstruction and rehabilitation of agroecosystems depends on reduction the nitrogen losses due to leaching, soil erosion and volatilization (Kizilkaya, 2008. For this purpose, the use of eco-friendly bio based fertilizers that are derived from natural origin, known as effective and enforceable approaches. In this regards, the proper use of manure and free-living aerobic bacteria of soils, such as Azotobacter and Azospirillum as well as mycorrhizal inoculation which can be used as a biological fertilizers, can particularly be considered (Kizilkaya, 2008. With regard to all mentioned above, the current study was aimed to evaluate the effects of biological, organic and inorganic resources of nitrogen on yield and yield components of black seed (Nigella sativa L.. Materials and methods The field experiment was conducted at Faculty of Agriculture, Ferdowsi University of Mashhad, Iran, in years of 2009-2010. Experimental site was located in a semi-arid region, Khorasan Province, Northeast of Iran. The soil texture was silty loam, pH 8.36, electrical conductivity 3.72 dS.m-1, total N 0.095% and 0.195% organic carbon. The available P and K contents were 5.76 and 0.378 ppm, respectively. Experimental design was arranged by using a completely randomized block design with three replications. Experimental treatments included chemical fertilizer (urea, urea + nitroxin, urea + mycorrhizae, urea + nitroxin + mycorrhizae, urea + biosulfur, manure, manure + nitroxin, manure + mycorrhizae

Heterosis and combining ability for grain yield and yield component ...

African Journals Online (AJOL)

... ranged from 0 to -13% indicating that the hybrids tend to be earlier in maturity than the parents. The mean squares due to GCA for days to maturity, ear diameter, member of kernels per row, 1000 kernel weight and grain yield were significant, indicating the importance of additive genetic variance in controlling these traits.

Yield and Yield Components of Safflower (Carthamus tinctorius L. as Affected by Micronutrient Application and Vermicompost in Two Kerman and Bardsir Regions

Directory of Open Access Journals (Sweden)

Alireza Karimi Gogheri

2017-10-01

Full Text Available Introduction Despite the importance of oily crops in development of Iran, there are few studies on nutrition with micronutrient in these crops, especially for safflower. Safflower, a deep rooted oilseed crop, is grown in many areas of world because it can be used as oil crop, vegetable, birdfeed and spices. To achieve the acceptable growth and yield of safflower, it needs the sufficient micro- and macronutrient, so that recently, there has been an increased interest in evaluation of nutrient role in quality and quantity of safflower. Application of vermicompost in oil crop production systems of Iran has been increased; which it can improve soil structure by increasing aggregate stability as well as increase in water holding capacity and aeration. On the other hand, micronutrients are nutrients required by plants in small quantities to organize a range of physiological functions. The deficiency micronutrients is widespread in many parts of the country due to cultivation of high yielding varieties, intensive agriculture and increasing use of sulphur free fertilizers in large quantities with concomitant decrease in use of organic manures. There is little information on interaction of vermicompost and micronutrients combination on safflower. thus, this study was conducted to evaluate the effect of combinations of three important micronutrient consisted of sulphur, zinc and boron on yield and yield components as well as dry forage production of safflower in different vermicompost treatments. Material and Methods In this research, the effect of micronutrient application and vermicompost was examined on yield and yield components of safflower in Agriculture and Natural Resources Research Center of Kerman Province in two Kerman and Bardsir regions. The treatments were included vermicompost factor at two levels (0 and 6 t ha-1 and micronutrients combinations at 12 levels (no use, 100 kg ha-1 S, 200 kg ha-1 S, 3 ml L-1 Zn, 2 ml L-1 B, four twofold and two

Effect of Integrated Nutrient Management on Yield and Yield ...

African Journals Online (AJOL)

Declining soil fertility is one of the major problems causing yield reduction of barley ... (VC) with inorganic NP on growth, yield and yield components of food barley. ... The experiments were laid out in a randomized complete block design with ...

Dual-component video image analysis system (VIASCAN) as a predictor of beef carcass red meat yield percentage and for augmenting application of USDA yield grades.

Science.gov (United States)

Cannell, R C; Tatum, J D; Belk, K E; Wise, J W; Clayton, R P; Smith, G C

1999-11-01

An improved ability to quantify differences in the fabrication yields of beef carcasses would facilitate the application of value-based marketing. This study was conducted to evaluate the ability of the Dual-Component Australian VIASCAN to 1) predict fabricated beef subprimal yields as a percentage of carcass weight at each of three fat-trim levels and 2) augment USDA yield grading, thereby improving accuracy of grade placement. Steer and heifer carcasses (n = 240) were evaluated using VIASCAN, as well as by USDA expert and online graders, before fabrication of carcasses to each of three fat-trim levels. Expert yield grade (YG), online YG, VIASCAN estimates, and VIASCAN estimated ribeye area used to augment actual and expert grader estimates of the remaining YG factors (adjusted fat thickness, percentage of kidney-pelvic-heart fat, and hot carcass weight), respectively, 1) accounted for 51, 37, 46, and 55% of the variation in fabricated yields of commodity-trimmed subprimals, 2) accounted for 74, 54, 66, and 75% of the variation in fabricated yields of closely trimmed subprimals, and 3) accounted for 74, 54, 71, and 75% of the variation in fabricated yields of very closely trimmed subprimals. The VIASCAN system predicted fabrication yields more accurately than current online yield grading and, when certain VIASCAN-measured traits were combined with some USDA yield grade factors in an augmentation system, the accuracy of cutability prediction was improved, at packing plant line speeds, to a level matching that of expert graders applying grades at a comfortable rate.

Effects of mycorrhiza inoculation and different irrigation levels on yield, yield components and essential oil contents of fennel (Foeniculum vulgare Mill. and ajwain (Trachyspermum ammi L.

Directory of Open Access Journals (Sweden)

A Koocheki

2016-05-01

Full Text Available Introduction Fertilizers are the key components which provide plant nutrients' needs in recent years (Omid Jangir & Sing, 1996; Kapoor et al., 2007. In many cases, using chemical fertilizers has different negative environmental effects such as soil, water and air pollution, which increase environmental hazardous and production costs (Jangir & Sing, 1996; Kapoor et al., 2007. Biological activities are markedly enhanced by microbial interactions in the rhizosphere of plants (Kapoor et al., 2007. Many investigators have successfully used mycorrhiza to increase the availability of immobilized phosphate and thus minimize the use of mineral fertilizers. Arbuscular Mycorrhizal Fungi (AMF can better enable a plant to withstand environmental stresses such as drought and salinity. AMF interacts with pathogens and other rhizosphere inhabitants which affect plant health and nutrition. More importantly, mycorrhizal fungi are capable of dissolving weakly soluble soil minerals, especially phosphate, by releasing acids or increasing CO2 partial pressure (Gupta et al., 2002; Gosling et al., 2006; Kapoor et al., 2007. Therefore, they have the ability to enhance host plant uptake of relatively immobile nutrients particularly P, S and Zn. Limited water supply is also another major environmental constraint in the productivity of crop and medicinal plants. Moisture deficiency induces various physiological and metabolic responses such as stomatal closure, decline in growth rate and photosynthesis (Flexas and Medrano, 2002. The results of Baher et al. (2002 showed that greater soil water stress decreased plant height and total fresh and dry weight of Satureja hortensis. Materials and Methods In order to study the effects of mycorrhiza inoculation and different irrigation levels on the growth, quantitative and qualitative yield of fennel (Foeniculum vulgare Mill. and ajwain (Trachyspermum ammi L., a field experiment was conducted as factorial based on randomized

THE EFFECT OF FERTILIZATION ON YIELD COMPONENTS AND QUALITY PARAMETERS OF SOYBEANS [(GLYCINE MAX (L.) MERR.] SEEDS

OpenAIRE

Macák, Milan; Candráková, Eva

2013-01-01

Field experiment was carry out at experimental farm Oponice (West Slovakia, 48° 28´N, 18° 9´E) ) in 2004-2007. The aim of the work was to evaluate the influence of nitrogen fertilization treatments on yield and yield component and selected quality parameters (proteins, oil, fibre, isoflavones) of soybeen seeds variety Korada, in agri-environmental condition of western part of Slovakia. The fertilization treatments were as follows: (I) unfertilized treatment; (II) application of nitrogen ferti...

Semi-quantitative evaluation of texture components and anisotropy of the yield strength in 2524 T3 alloy sheets

International Nuclear Information System (INIS)

Shen, Fanghua; Yi, Danqing; Wang, Bin; Liu, Huiqun; Jiang, Yong; Tang, Cong; Jiang, Bo

2016-01-01

Decreasing the anisotropy of 2524 alloys is a key factor for their use in applications such as high-performance inertial components or space robots. Studying the interaction between sheet textures and anisotropy is a key factor to overcome this problem. In this study, the semi-quantitative approach to estimate the relation between texture and in-plane anisotropy (IPA) of yield strength has been developed. The intensity ratio between Cube and Brass texture components (F CGB ) was used as an effective variable for this purpose. This approach has been tested in 2524 T3 aluminum alloy sheets, which were investigated using X-Ray diffraction, scanning electron microscopy, optical microscopy and tensile tests. The results show that F CGB decreased with an increase in cold reduction. The 2524 T3 sheet, dominated by Cube texture grains, possesses the lowest in-plane anisotropy for the yield strength of all texture components investigated. The alloy sheet dominated by Brass texture exhibits the highest anisotropy, while the Goss texture-led sheets fall in between them. These results agree with the trends seen in the factor F CGB , suggesting that is suited to evaluate the anisotropy of yield strength in 2524 T3 alloy sheets semi-quantitatively.

Semi-quantitative evaluation of texture components and anisotropy of the yield strength in 2524 T3 alloy sheets

Energy Technology Data Exchange (ETDEWEB)

Shen, Fanghua [School of Materials Science and Engineering, Central South University, Changsha 410083 (China); Yi, Danqing, E-mail: yioffice@csu.edu.cn [School of Materials Science and Engineering, Central South University, Changsha 410083 (China); Light Alloy Research Institute, Central South University, Changsha, Hunan 410083 (China); National Collaborative Innovation Center of Advanced Nonferrous Structural Materials and Manufacturing, Central South University, Changsha 410083 (China); Wang, Bin; Liu, Huiqun; Jiang, Yong; Tang, Cong; Jiang, Bo [School of Materials Science and Engineering, Central South University, Changsha 410083 (China)

2016-10-15

Decreasing the anisotropy of 2524 alloys is a key factor for their use in applications such as high-performance inertial components or space robots. Studying the interaction between sheet textures and anisotropy is a key factor to overcome this problem. In this study, the semi-quantitative approach to estimate the relation between texture and in-plane anisotropy (IPA) of yield strength has been developed. The intensity ratio between Cube and Brass texture components (F{sub CGB}) was used as an effective variable for this purpose. This approach has been tested in 2524 T3 aluminum alloy sheets, which were investigated using X-Ray diffraction, scanning electron microscopy, optical microscopy and tensile tests. The results show that F{sub CGB} decreased with an increase in cold reduction. The 2524 T3 sheet, dominated by Cube texture grains, possesses the lowest in-plane anisotropy for the yield strength of all texture components investigated. The alloy sheet dominated by Brass texture exhibits the highest anisotropy, while the Goss texture-led sheets fall in between them. These results agree with the trends seen in the factor F{sub CGB}, suggesting that is suited to evaluate the anisotropy of yield strength in 2524 T3 alloy sheets semi-quantitatively.

A comparative ideotype, yield component and cultivation value analysis for spring wheat adaptation in Finland

Directory of Open Access Journals (Sweden)

Heikki Laurila

2012-12-01

Full Text Available In this study Mixed structural covariance, Path and Cultivation Value analyses and the CERES-Wheat crop model were used to evaluate vegetation and yield component variation affecting yield potential between different high-latitude (> 60° N lat. and mid-European (< 60° N lat. spring wheat (Triticum aestivum L. genotypes currently cultivated in southern Finland. Path modeling results from this study suggest that especially grains/ear, harvest index (HI and maximum 1000 kernel weight were significant factors defining the highest yield potential. Mixed and Cultivation value modeling results suggest that when compared with genotypes introduced for cultivation before 1990s, modern spring wheat genotypes have a significantly higher yielding capacity, current high yielding mid-European genotypes even exceeding the 5 t ha-1 non-potential baseline yield level (yb. Because of a forthcoming climate change, the new high yielding wheat genotypes have to adapt for elevated temperatures and atmospheric CO2 growing conditions in northern latitudes. The optimized ideotype profiles derived from the generic high-latitude and mid-European genotypes are presented in the results. High-latitude and mid-European ideotype profiles with factors estimating the effects of concurrent elevated CO2 and temperature levels with photoperiodical daylength effects can be utilized when designing future high yielding ideotypes adapted to future growing conditions. The CERES-Wheat ideotype modeling results imply, that with new high yielding mid-European ideotypes, the non-potential baseline yield (yb would be on average 5150 kg ha-1 level (+ 108 % vs. new high-latitude ideotypes (yb 4770 kg ha-1, 100% grown under the elevated CO2(700ppm×temperature(+3ºC growing conditions projected by the year 2100 climate change scenario in southern Finland.

Ascribing soil erosion of hillslope components to river sediment yield.

Science.gov (United States)

Nosrati, Kazem

2017-06-01

In recent decades, soil erosion has increased in catchments of Iran. It is, therefore, necessary to understand soil erosion processes and sources in order to mitigate this problem. Geomorphic landforms play an important role in influencing water erosion. Therefore, ascribing hillslope components soil erosion to river sediment yield could be useful for soil and sediment management in order to decrease the off-site effects related to downstream sedimentation areas. The main objectives of this study were to apply radionuclide tracers and soil organic carbon to determine relative contributions of hillslope component sediment sources in two land use types (forest and crop field) by using a Bayesian-mixing model, as well as to estimate the uncertainty in sediment fingerprinting in a mountainous catchment of western Iran. In this analysis, 137 Cs, 40 K, 238 U, 226 Ra, 232 Th and soil organic carbon tracers were measured in 32 different sampling sites from four hillslope component sediment sources (summit, shoulder, backslope, and toeslope) in forested and crop fields along with six bed sediment samples at the downstream reach of the catchment. To quantify the sediment source proportions, the Bayesian mixing model was based on (1) primary sediment sources and (2) combined primary and secondary sediment sources. The results of both approaches indicated that erosion from crop field shoulder dominated the sources of river sediments. The estimated contribution of crop field shoulder for all river samples was 63.7% (32.4-79.8%) for primary sediment sources approach, and 67% (15.3%-81.7%) for the combined primary and secondary sources approach. The Bayesian mixing model, based on an optimum set of tracers, estimated that the highest contribution of soil erosion in crop field land use and shoulder-component landforms constituted the most important land-use factor. This technique could, therefore, be a useful tool for soil and sediment control management strategies. Copyright �

Responses of Seed Yield, Yield Components and Some Morpho-physiological Traits of Wheat Cultivars (Triticum aestivum to the Application Methods of Fulzyme Biofertilizer

Directory of Open Access Journals (Sweden)

A. Eslami

2014-10-01

Full Text Available To study the effect of application methods of Fulzym biofertilizer (containing Bacillus subtilis on yield, yield components and some morpho-physiological characteristics of four cultivars wheat, an experiment was conducted in field of Astan Quds Razavi in 2010- 2011. The experiment performed was in split plot based on randomized complete block design with three replications. Four wheat cultivars (Falat, Pishtaz, Bahar and Toos were assigned to main plots and four biofertilizer application methods (as seed inoculation, using in irrigation water, seed inoculation and irrigation and control to sub plots. Results indicated that Falat had the lowest plant height (61.5 cm than other varieties. Plant height of Toos and Pishtaz were about 14.5 percent higher than Falat. Application methods of Fulzym increased chlorophyll content and plant height. Highest chlorophyll contents were obtained when seeds inoculated by Fulzyme and used through irrigation. At the end of growing season, it was found that chlorophyll content of Falat and Toos flag leaves were higher than Pishtaz and Bahar. It was also revealed that Bahar when Fulzyme was used showed a better response to treatments than other varieties as for as biological and seed yields were concerned. Highest seed yield produced by irrigation and combination of seed inoculation and irrigation (9063 and 8609 kg.ha-1 and lowest seed yield (5858 kg.ha-1 to Falat in the control treatment.

Measurements of fission yields

International Nuclear Information System (INIS)

Denschlag, H.O.

2000-01-01

After some historical introductory remarks on the discovery of nuclear fission and early fission yield determinations, the present status of knowledge on fission yields is briefly reviewed. Practical and fundamental reasons motivating the pursuit of fission yield measurements in the coming century are pointed out. Recent results and novel techniques are described that promise to provide new interesting insights into the fission process during the next century. (author)

Effect of Organic Fertilizers on Yield and Yield Components of Safflower (Carthamus tinctorious L.

Directory of Open Access Journals (Sweden)

S. M Azimzadeh

2017-12-01

Full Text Available Introduction Soil organic matters impose direct and indirect effect on crop production through providing of nutrients and also improvement of soil physical condition and stimulation of plant growth. It also seems that plant production based on application of organic fertilizers is more stable than application of chemical fertilizers. So, there has been lots of attention from agronomists, ecologists and consumers toward organic fertilizers. In organic farming, agricultural ecosystem is considered as a living thing and integrated totality, so in this system, soil, crop, microorganisms and micro-climate affect on each other and also are under the effect of each other. For better performance of this system, each component should be in its appropriate condition. Periodical reverse of organic matter to soil and crop rotation will improve biological and physical characteristics of soil. However, balance of nutrients in organic matter which is available for plant is important because causes less dependence to chemical fertilizers. Indeed, nutrients balance is more important than application of chemical fertilizers that can lead to water pollution and decreasing quality of food products. Application of chemical fertilizers caused considerable increasing of farmer's income in last decade. These fertilizers also imposed ecological and environmental problems. In Iran like most of the countries, overusing of chemical inputs like fertilizers has caused destruction of water and soil resources. In addition, leaching of soluble chemical fertilizers specially nitrogen fertilizers has caused pollution of drinking water and overfilling of the water of lakes and ponds in some regions. So researchers have done a lot of effort to replace organic and biological fertilizers with chemical one. The aim of this experiment was to study the effect of organic fertilizers on safflower production. Materials and Methods In order to evaluate the effect of organic fertilizers and

Effect of Foliar Application of Chelate Iron in Common and Nanoparticles Forms on Yield and Yield Components of Cumin (Cuminum cyminum L. under Drought Stress Conditions

Directory of Open Access Journals (Sweden)

A Nasiri Dehsorkhi

2018-05-01

Full Text Available Introduction Cumin is a member of Apiaceae family and annual plant which is widely cultivated in arid and semi-arid zone. Iran is one of the main producers of this plant. Water deficit is the major limiting factor in crops production. Proper nutrition management under stress conditions could partly help the plant to tolerate different stresses. Various studies were carried out to understand the effect of nanoparticles on the growth of plants. For example, Hong et al. (2005 and Yang et al. (2006 reported that a proper concentration of nano-TiO2 was found to improve the growth of spinach by promoting photosynthesis and nitrogen metabolism. Iran a country with arid and semi-arid climate, always face water deficiency. Thus the aim of this research was investigate the effect of foliar application of chelate iron in common and nanoparticles forms on yield and yield components of cumin (Cuminum cyminum L. under drought stress conditions. Materials and Methods A field experiment was conducted as a split plot in complete randomized block design with three replications in Esfahan city, during the growing season of 2015-2016. Treatments were included three irrigation intervals (5, 10 and 15 days as main plots and Fe foliar application in four levels (control, 2 g L-1 iron chelate, 2 g L-1 Nano-iron chelate, 4 g L-1 iron chelate, 4 g L-1 nano-iron chelate. Foliar application of Fe chelate on leaves was done two times at before and after flowering stage. The plots were 16 m2 with 4 sowing rows, 4 m long. Seeds were placed at 2 to 4 cm depth in each row. All data collected were subjected of analysis of variance (ANOVA using MSTATC software. Significant differences between means refer to the probability level of 0.05 by LSD test. Results and Discussion The results indicated that drought stress decreased the investigated traits significantly but the effect of irrigation by 15 days interval was more than 10 days. Plots which irrigated by 15 days interval showed

The Effects of Organic, Chemical and Biological Fertilizers on Seed Yield and Yield Components of Dwarf Chicory (Cichorium pumilum Jacq.

Directory of Open Access Journals (Sweden)

Farima Doaei

2017-08-01

Full Text Available Introduction: In order to response to greater demand for wild medicinal plants consumption, it has been recommended that wild medicinal plants can be brought into cultivation systems. Cichorium pumilum Jacq. is an annual species of Asteraceae family, that has a long history of herbal use and is especially of great value for its tonic effects upon the liver and digestive tract. The root and the leaves of chicory are digestive, hypoglycemic, diuretic, laxative and tonic. Using chemical fertilizers can be easily lost from soils through fixation, leaching or gas emission that can lead to reduced fertilizer efficiency. The applications of organic fertilizers such as compost and vermicompost can be considered as a good management practice to increase cropping system sustainability, reducing soil erosion and improving soil physical, chemical and biological properties. Soil microorganisms have a significant role in regulating the dynamics of organic matter breakdown and the availability of plant nutrients such as nitrogen, phosphate and sulfur. Materials and Methods: For evaluating the effects of organic, mineral and biological fertilizers on seed yield and yield components of dwarf chicory (Cichorium pumilum Jacq., a field experiment was conducted at the Agricultural Research Station, the Ferdowsi University of Mashhad (36016/ N, 59036/ E, elevation 985 m during growing season of 2011-2012. The experimental layout was factorial based on randomized complete block design with four replications. The experimental treatments were all combination of organic and chemical fertilizers (compost 4 t/ha, vermicompost 4 t/ha, urea fertilizer 130 kg/ha and control and biological fertilizer (biosulfur biofertilizer + pure sulfur 100 kg/ ha and control. Before conducting the experiment, soil sample were taken from the depth of 0-30 cm, and physical and chemical characteristics of the soil and also used compost and vermicompost were determined. All fertilizer

Effects of planting method on agronomic characteristics, yield and yield components of sweet and super sweet corn (Zea mays L. varieties under saline conditions

Directory of Open Access Journals (Sweden)

F. Faridi

2016-05-01

Full Text Available In order to evaluate the effects of planting pattern on morphological, Phonological, yield and yield components of sweet and super sweet corn (Zea mays L. varieties under saline conditions, a field experiment was conducted as split plots based on a randomized complete block design with four replications. Planting pattern in 3 levels included one row in ridge, two row in ridge and furrow planting, as a main plot and varieties in 4 levels sweet corn with 2 types (KSc 403 su, Merit and super sweet with two types (Basin, obsession as sub plots. The results showed that planting pattern had significant differences on plant height, ear height, leaf length, leaf width, number of kernel per row, number of rows per ear and 1000-kernel weight. but had no significant effects on the length of tassel, number of leaf/plant, number of leaf per plant above ear, stem diameter, time of anthesis, time of silking, anthesis silking interval ASI, grain yield, biological yield and harvest index. Different varieties had significant effects on the total characteristics studied except number of leaf above ear and stem diameter. Most of the conservable grain yield and harvest index was in Obsession variety (10 kg and 39%, respectively and the least was seen in Basin (4 kg and 20%, respectively. The result showed that use of furrow planting pattern for sweet and super sweet corn in saline conditions can effects result in higher yield.

Interrelationship and path coefficient analysis of yield components in F4 progenies of tef (Eragrostis tef).

Science.gov (United States)

Debebe, Abel; Singh, Harijat; Tefera, Hailu

2014-01-01

This experiment was conducted at Debre Zeit and Akaki during 2004-2005 cropping season on F2-derived F4 bulk families of three crosses, viz, DZ-01-974 x DZ-01-2786, DZ-01-974 x DZ-Cr-37 and Alba x Kaye Murri. To estimate the correlations and path coefficients between yield and yield components, 63 F4 families were taken randomly from each of the three crosses. The 189 F4 families, five parents and two checks were space planted following in 14 x 14 simple lattice design. Study of associations among traits indicated that yield was positively associated with shoot biomass, harvest index, lodging index and panicle kernel weight at phenotypic level at Debre Zeit. At Akaki, yield had significant positive correlation with shoot biomass, harvest index, plant height, panicle length and panicle weight. At genotypic level, grain yield per plot exhibited positive association with harvest index, shoot biomass, lodging index and panicle kernel weight at Debre Zeit. By contrast, days to heading, days to maturity, plant height and panicle length showed negative association with yield. At Akaki, kernel yield per plot was positively correlated at genotypic level with all the traits considered where lodging index had the highest correlation followed by shoot biomass, panicle kernel weight and harvest index. Path coefficient analysis at both phenotypic and genotypic levels for both the locations suggested those shoot biomass and harvest indexes are the two important yield determining traits. These two traits might be useful in indirect selection for yield improvement in the material generated from the three crosses under consideration.

Effect of Different Level of Water Stress and Nitrogen Fertilizer on Yield and Yield Components of Barley in Badjgah (Fars province

Directory of Open Access Journals (Sweden)

ali asghar ghaemi

2016-02-01

Full Text Available Introduction: Barley is very important to feed humans, livestock, medical, industrial uses, especially in fermentation industries. In Iran, barley crop cultivation was nearly 1.4 million hectares withits production of 1.3 million tons in 2003 (2. Barelyis the oldest crops to environmental stresses such as drought and salinity resistance (3.The different barely growth stages with extreme water requirement can benoted in germination stage, stem elongation, heading the production stage, the stage of flowering and seed production. Typically, for spring and autumn barely respectively 3 and 4 to 5 times irrigation is done during the growing season. The barley water requirement over its life is between 4 and 7 thousand cubic meters and 518 liters of water is needed to produce one kilogram of dry matter. Due to limited water resources and low rainfall in Iran, efficient use of water is absolutely essential and the maximum water utilization must be achieved by applying a minimum amount of water in agriculture. One of the ways to increase productivity in agricultural water is deficit irrigation.Deficit irrigation is an optimization strategy for water use efficiency in irrigation.The purpose of this study was to evaluate the simultaneous effect of fertilizer treatments (150, 225 and 75 kg/ ha and water at three different levels (100%, 75% and 50% of crop water requirement at different growth stages on leaf area index, weight fresh and dried herb and plant nitrogen concentration and the effect of irrigation and nitrogen fertilizer on yield, yield components and productivity of water use. Materials and Method: This research was conducted in Shiraz University in fall 2012 to study the effect of interaction of deficit irrigation and nitrogen fertilizer on yield, yield component and water use efficiency and nitrogen concentration in different stages of barley (Bahman species growth. This experiment were evaluated using a randomized complete block design with s

Effect of Chemical Fertilizer, Cow Manure and Municipal Compost on Yield, Yield Components and Oil Quantity of three Sesame (Sesamum indicum L. Cultivars in Mashhad

Directory of Open Access Journals (Sweden)

P Rezvani Moghaddam

2013-10-01

Full Text Available In order to evaluate the effects of different organic and chemical fertilizers on yield, yield components and seed oil content of sesame an experiment was conducted in a split plot layout based on randomized complete block design with four replications at Research Station, Faculty of Agriculture, Ferdowsi University of Mashhad in year 2006. Four types of fertilizer, including chemical fertilizer, cow manure, municipal compost and no fertilizer (control were allocated as main plots and three sesame cultivars (two local varieties of Kalat and Esfarayen, and Oltan cultivar were used as sub plots. The results showed that fertilizer treatments had significant effect (P

Effect of Mulch and Water Stress on Some Physiological Traits, Yield Components and Grain Yield of Red Kidney bean (Phaseolus vulgaris L.

Directory of Open Access Journals (Sweden)

R Amini

2016-02-01

Full Text Available Introduction Water use in agricultural production as one of the most important environmental factors affecting plant growth and development, especially in arid and semi-arid climatic conditions of Iran is of special importance (21. One of the ways of alleviating water scarcity is by enhancing its use efficiency or productivity. Improving water use efficiency in arid and semi-arid areas depends on effective conservation of moisture and efficient use of limited water. Mulching is one of the management practices for increasing water use efficiency (WUE . Straw mulch is commonly used as mulch. Straw mulching has potential for increasing soil water storage (16. Mulches modify the microclimate and growing conditions of crops (16, conserve more water and increase water use efficiency (34. Red kidney bean (Phaseolus vulgaris L. is the most important food legume (25 and is an important source of proteins and minerals (28. The majority of red kidney bean production is under drought conditions, and thus yield reductions due to drought are very common (29. This research was carried out to evaluate the effect of wheat straw mulch and water stress on physiological traits, yield components and grain yield of red kidney bean cultivars. Materials and Methods A field experiment was conducted in 2012 at the Research Farm of the Faculty of Agriculture, University of Tabriz, Iran (latitude 38°05_N, longitude 46°17_E, altitude 1360 m above sea level. In order to investigate the effect of mulch on grain yield and yield components of red kidney bean (Phaseolus vulgaris L. cultivars at different water stress treatments, a factorial experiment was conducted based on RCB design with three replications. The factors were including water stress treatment (I1 and I2, irrigation after 60 and 120 mm evaporation from class A pan, respectively; mulch application at two levels (M1: (no mulch and M2: 2 ton ha-1 wheat straw mulch and red kidney bean cultivars including Akhtar and

ROOTSTOCK-SCION INTERACTION: 1. EFFECT ON THE YIELD COMPONENTS OF CABERNET SAUVIGNON GRAPEVINE

Directory of Open Access Journals (Sweden)

ALBERTO MIELE

Full Text Available ABSTRACT The interaction between rootstock, scion and environment can induce different responses to the grapevine physiology. Thus, the aim of this study was to determine the rootstock effect on the yield components of Cabernet Sauvignon (CS grapevine grown in the Serra Gaúcha viticultural region. The experimental design was completely randomized blocks, with 15 treatments, three replicates and ten vines per plot. The results show that all variables evaluated were significantly affected by the year and the rootstock. The CS/Solferino was among other combinations influenced by the year and had higher significant yield/ vine. Indeed, it was higher than that CS/Rupestris du Lot, CS/101-14 Mgt., CS/3309 C, CS/5BB K, CS/161- 49 C, CS/1103 P. and CS/Isabel. The number of clusters/bud, per burst bud and per vine and the weight of clusters were affected by the rootstock as well. Pruning weight/vine, yield/pruning weight, leaf area/vine, leaf area index and leaf area/fresh fruit weight are variables related to the physiology of grapevine which were also affected by the rootstock. In general, rootstocks had adapted well to the environment where the experiment was carried out, giving vigor and high yield to Cabernet Sauvignon grapevine, which means that they may be used by grape growers in this region. However, the choice of the right rootstock depends on various aspects, such as those related to the soil characteristics, climate conditions, grape varieties, and even clones, and production purposes.

Effects of Cycocel and Nitrogen Application on Yield and Yield Components of Autumn-Grown Oilseed Rape at Different Plant Densities

Directory of Open Access Journals (Sweden)

S. Majd

2013-06-01

Full Text Available In this research, which was carried out as two experiments (in the field and greenhouse at Research Farm of College of Agriculture, Shiraz University, Shiraz, Iran, in 2009-2010 growing season, the effects of different levels of nitrogen, plant density and cycocel application on yield and yield components of autumn-grown oilseed rape (Talaye cultivar were investigated. The field experiment was designed as split-split plot based on completely randomized blocks design. Treatments included nitrogen level (80, 140, 200 and 260 kg/ha as the main plot, plant density (70 and 90 plants/m2 as sub-plot and cycocel rate (0, 1.4 and 2.8 L/ha as sub- subplot. The greenhouse experiment, which was arranged as a factorial based on complete randomized design, included nitrogen level (0, 50, 100, 150 and 200 kg/ha and cycocel rate (0, 1.4 and 2.8 L/ha. Results showed that the highest seed yield was achieved at 200 kg N/ha, 2.8 L/ha cycocel and plant density of 90 plants/m2 (533.17, 533.96 and 521.6 g/m2, respectively. Application of 2.8 L/ha cycocel was associated with increased number of siliques per plant and final plants dry weight. Increasing plant density from 70 to 90 plants/m2 was associated with decreased number of siliques per plant, plant dry weight and number of seeds per silique. It appears that application of 200 kg N/ha, 2.8 L/ha cycocel and plant density of 90 plants/m2 could be recommended for maximum grain yield of autumn-grown rapeseed cv. Talaye, in agroclimatic conditions similar to this research

Residual Effect of Chemical and Animal Fertilizers and Compost on Yield, YieldComponents, Physiological Characteristics and Essential Oil Content of Matricaria chamomilla L. under Drought Stress conditions

Directory of Open Access Journals (Sweden)

a Ahmadian

2011-02-01

Full Text Available Abstract The residual effect of inorganic and organic fertilizers on growth and yield of plants is one of the important problems in nutrition. This study was conducted to determine the residual effect of different fertilizers on yield, yield components, physiological parameters and essential oil percentage of Matricaria chamomilla under drought stress. A split plot arrangement based on randomized completely block design (RCBD with three replication was conducted in 2009, at the University of Zabol. Treatments included W1 (non stress, W2 (75% FC and W3 (50% FC as main plot and three types of residual’s fertilizers: F1 (non fertilizer, F2 (chemical fertilizer, F3 (manure fertilizer and F4 (compost as sub plot. Results showed that water stress at W3 treatment reduced dry flower yield. Low water stress increased essential oil percentage and the highest oil was obtained in W2. In this experiment, free proline and total soluble carbohydrate concentration were increased under water stress. The residual’s manure and compost enhanced flower yield, percentage and yield of essential oil of chamomile at the second year. At a glance, animal manure application and light water stress (75% FC was recommended to obtain best quantitative and qualitative yield. Keywords: Water Stress, Fertilizer, Carbohydrate, Proline, Chamomile

The Effects of Drought Stress on Yield, Yield Components and Anti-oxidant of Two Garlic (Allium sativum L. Ecotypes with Different Planting Densities

Directory of Open Access Journals (Sweden)

shiva akbari

2016-07-01

Full Text Available Introduction Drought stress reduces plant growth by affecting various physiological and biochemical processes, such as photosynthesis, respiration, translocation, ion uptake, carbohydrates, nutrient metabolism and growth promoters. Garlic (Allium sativum L. is an annual bulb crop that has been cultivated since ancient times and was used as a spice and condiment for many centuries. Garlic is an important plant because of its pharmaceutical properties. The optimum yield of this bulb crop depends on well-managed irrigation, fertilization and cultivation practices. In the final and middle stages of growth, garlic is sensitive to water stress and low irrigation is unsuitable in these stages. This experiment was established to study the influence of drought stress and planting density on yield and its components and the non-enzymatic anti-oxidant content of two different garlic ecotypes. Materials and methods This study was conducted in 2011-2012 in a farmland at the south east of Semnan city. The experimental layout was a split-plot factorial with a randomized complete block design with three replications. The treatments were comprised of three factors: irrigation rates (60%, 80% and 100% of estimated crop evapotranspiration (ETC as the main plot and the factorial combination of three levels of planting density (30, 40 and 50 plants.m-2 and two ecotypes (Tabas and Toroud as the sub-plots. To estimate the crop water requirement, different meteorological parameters were collected from Semnan weather station and were used based on FAO-56 water irrigation calculation instructions. After harvesting, ten garlic plants were sampled randomly in each plot and bulb yield components were measured. To calculate the leaves anti-oxidant content, DPPH method was used. The statistical significances of mean values were assessed by analysis of variance and LSD tests at p≤0.05. All calculations were performed using SAS and Mstat-C softwares. Results and discussion

Effect of environmental and genetic factors on the correlation and stability of grain yield components in wheat

Directory of Open Access Journals (Sweden)

Hristov Nikola

2011-01-01

Full Text Available More effective breeding and development of new wheat genotypes depend on an intricate analysis of the complex relationships among many different traits. The objective of this paper was to determine the interrelationship, direct and indirect effects, and stability of different yield components in wheat. Forty divergent genotypes were analyzed in a three- year study (2005-2007. Highly significant correlations were found between grain yield per plant and all the other traits analyzed except spike length, with the only negative correlation being that with plant height. Path analysis revealed highly significant direct effects of grain number per spike, grain mass per spike and 1000 grain weight on grain yield per plant. Analysis of stability parameters showed that the stability of grain yield per plant depended for the most part on the stability of grain number per spike, grain mass per spike and harvest index. Cluster analysis identified genotypes with a high performance for grain yield per plant and good stability parameters, indicating the possibility of developing wheat varieties with a high potential and high stability for a particular trait.

Effect of Black and Clear Polyethylene Mulch on Yield and Yield Components of Melon in Salinity Stress Condition

Directory of Open Access Journals (Sweden)

Peyman Jafari

2017-02-01

Full Text Available Introduction: The term of Mulch, is the German word (Molsh means the soft, however, not soft, and made of plant debris or synthetic substances. Many positive effects attributed to the use of plastic mulch such as adjusting the temperature in the root environment, conserve moisture, reduce weeds, increase root growth, reduce soil erosion, and soil condensation and improve germination and early plant establishment. The use of mulch can reduce the harmful effects of salt in plants. Materials and Methods: To evaluate the effects of black and clear polyethylene mulch on yield and yield components of melon in salinity stress condition, a study was conducted in 2011 using split plot randomized based on complete block design with three replications in Varamin region. Three salinity levels of irrigation water of 2, 5 and 8 dS-1 as main factor and three plastic mulch treatments (no mulch, clear mulch and black mulch were considered as sub-plots. At harvest and after determining the yield and number of fruits harvested from each plot, the average number of fruits per plant was measured and fruit pulp thickness was recorded with calipers. Results Discussion The results showed interactive effects of salinity and mulch on fruit yield, number of fruits per plant, average fruit weight, fruit length, days to first harvest and fruit soluble solids percentage were statistically significant. In salinity levels of 2, 5 and 8 dS m-1, fruit yield increased, respectively, 19.6, 59, and 45.4 %in clear mulch compared to control. Similarly these increases for the black mulch were equal to 15.7, 41.9, and 21.4 percent, respectively. With 2, 5 and 8 dS m-1 salinity levels, fruit yield in the first harvest were 7.44, 7.72, and 6.98 t ha -1, respectively, which was significantly higher than without mulch and black mulch. Mulch can reduce evaporation and increase the level of moisture in the soil and thereby dilute the salt and reduce the harmful effects of salinity. Some

Impact of Inter-Row Spacing on Yield and Yield Components of several Annual Medics Species

Directory of Open Access Journals (Sweden)

Mahnaz BAGHERI

2010-12-01

Full Text Available A field study was conducted in Faculty of Agriculture, Tarbiat Modares University, Tehran, Iran to evaluate the effects of three within-row spacing treatments (20, 30 and 40 cm on forage and seed production of five species of annual medics (Medicago scutellata cv. Sava; M. littoralis cv. Herald; M. polymorpha cv. Santiago; M. minima cv. Orion and M. truncatula cv. Mogul. The experiment was carried out in Faculty of Agriculture, Tarbiat Modares University, Tehran, Iran. The results of the experiment indicated that M. polymorpha had the highest forage yield out of the highest plant population. Latter with average 443.09 Kg ha-1 and M. scutellata with average 409.99 Kg ha-1 produced the highest seed yield. Also, the last species with 1306.78 Kg ha-1 had the highest pod yields. The highest seed yield and pod yield were produced at 20 cm within-row spacing because there were not adequate plants for maximum seed and pod yields in 30 and 40 cm within-row spacing. The tested plant densities did not affect on seeds number per pod, 1000 seeds weight and seeds to burr pod weight ratio. The M. truncatula and M. minima have the highest seeds number per pod. In addition, M. scutellata had the highest 1000 seeds weight with an average of 12.57 g. The highest seeds to burr pod ratio was observed in M. polymorpha. The most pod numbers were obtained in 20 and 30 cm within-row spacing and M. polymorpha while, the least pod numbers was observed in M. scutellata. Plant densities did not affect on pod numbers of the mentioned species. The highest dry forage yield was produced in 20 cm within-row spacing. Among the tested tested species, M. truncatula had the highest forage yield with average 870.07 Kg ha-1. This experiment indicated that there is possibility for seed and forage production of tested annual medics in the mentioned zone with the considering suitable plant densities.

Pattern of quantitative inheritance of yield and component traits in opium poppy (Papaver somniferum L.

Directory of Open Access Journals (Sweden)

Maurya Krishna Nand

2014-01-01

Full Text Available Generation mean analysis of cross NB-5x58/1 and its reciprocal cross was carried out to understand the nature of gene action in opium poppy. The significance of A, B, C and D scaling tests indicated presence of non-allelic interaction in the inheritance of traits except capsule size and husk yield/plant for reciprocal cross. Additive as well as dominance components of gene action were found in both the crosses. Most of the traits had greater non fixable dominance ‘h’ and dominance x dominance effects ‘l’ than fixable additive (d and additive x additive effects (i except leaves/plant, branches/plant, capsules/plant, stem diameter, capsule weight/plant, husk yield/plant, opium yield/plant, codeine and narcotine content which showed greater importance of additive (d and additive x additive effects (i effects. Inter-mating of the best parents, diallel selective mating or biparental mating in early segregating generations followed by recurrent selections were suggested for genetic improvement of opium poppy.

Pea yield and its components in different crop rotations

OpenAIRE

Seibutis, Vytautas; Deveikytė, Irena

2006-01-01

The effects of the crop rotations (2-4 course) differing in duration on the formation of pea productivity elements and the yield were investigated in stationary field experiments in Dotnuva during 1997-2004. Averaged experimental data showed that the highest pea yield (3.70 t ha-1) was recorded in the three-course crop rotation (sugar beet-spring barley-pea), in the four-course (pea-winter wheat-sugar beet-spring barley) and two-course (pea-winter wheat) crop rotations the grain yield consist...

Evaluation of Chitosan Nanoparticles Effects on Yield and Yield Components of Barley (Hordeum vulgare L. under Late Season Drought Stress

Directory of Open Access Journals (Sweden)

Faride Behboudi

2018-01-01

Full Text Available As a step towards the profitable employment of nanoparticles (NPs in agriculture, effects of chitosan NPs was probed on barley plants under late season drought stress. A factorial experiment was performed based on a randomized complete block design with three replications. The experimental factors included the chitosan NPs concentrations (0 (control, 30, 60 and 90 ppm, application methods (foliar and soil application and irrigation regimes (well-watered and withholding of irrigation for 15 days after pollination. The barley seeds were separately planted in pots. Then, the NPs were added to them through the soil and foliar application at three stages. The results indicated that using the chitosan NPs, especially 60 and 90 ppm, significantly increased the leaf area (LA, the leaf color (SPAD, the number of grain per spike, the grain yield and the harvest index compared to the control. Also, drought stress significantly decreased the yield and yield components compared to the well-watered plants. In contrast, using the chitosan NPs in plants under drought stress significantly increased the relative water content (RWC, the 1000-grain weight, the grain protein, the proline content, the catalase (CAT and the superoxide dismutase (SOD compared to the control. There was no a significant difference between two methods of using NPs in most studied traits. The results highlighted that using the chitosan NPs, especially 60 and 90 ppm, in both irrigation regimes can significantly improve the majority of the studied traits compared to the control and mitigate the harmful effects of drought stress.

Effect of Tillage in Day or Night and Application of Reduced Dosage of Imazethapyr and Trifluralin on Weed Control, Yield and Yield Components of Chickpea

Directory of Open Access Journals (Sweden)

A Abbasian

2015-07-01

Full Text Available This Experiment was arranged as a strip-plot on the base of a completely randomized block design with three replications to study the effect of tillage (whether in day or night or in day by light-proof cover and application of reduced dosage of imazethapyr and trifluralin on weed control, yield and yield components of chickpea. Main plots consisted of tillage methods and subplots consisted of trifluralin (at doses of 480, 960 and 1440 g ai /ha and imazethapyr (at doses of 50, 100 and 150 g ai /ha, plus weed free and weedy checks. Results showed weed biomass in day tillage, night tillage and in light-proof cover tillage were respectively 86, 127 and 148 g m-2. Therefore tillage at night or by light-proof cover in day time showed not enough efficiency in weed control. Weed biomass increased when application dose of herbicides decreased. Chickpea grain yield showed significant differences when different doses of herbicides applied. The minimum and the maximum seed yield were obtained respectively in weed free (by 208 g m-2 and weedy checks (by 123 g m-2. Reduced dosage of imazethapyr and trifluralin could control weeds good enough by no significant decrease in chickpea yield. Efficacy of imazethapyr to control weeds grown in chickpea was significantly better than that of trifluralin

Effect of Different Treatments of Mixed and Row Intercropping on Yield and Yield Components of Sesame and Bean

Directory of Open Access Journals (Sweden)

Sh Ghale Noyee

2017-12-01

Full Text Available Introduction Intercropping is a kind of multi-culture system where two or more plants are cultivated in a piece of land simultaneously. The aim of intercropping is optimizing the use of space, time and physical resources in both the top and under of the soil surface through maximizing positive relationship and minimizing negative relationship between the components of agricultural ecosystems. In intercropping due to better use of available resources such as land, labor, time, light, water and nutrients, as well as reducing damages caused by pests and diseases and socio-economic advantages, increase in production per unit area can be expected. In this study, yield and yield components of sesame and bean in additive and replacement intercropping with mixed and row planting type was evaluated and the possible advantages of intercropping to monoculture as well as the types of intercropping were compared. Materials and Methods This experiment was conducted in Agricultural Research Station of Ferdowsi University of Mashhad, located in 10 kilometers south-east of the city of Mashhad, Iran (latitude 36° 17′ N, longitude 59° 35′ E and 985 m elevation in 2013 and 2014. Climate of the area is cold and dry. A Split-Plot experiment based on randomized complete block design with three replications was used with the factor of cropping system (as main plot and intercropping proportions (as sub plot. The cropping system was included; mixed and row cropping and intercropping proportions were included; monoculture of bean (100b, 25% sesame- 75% bean (25s75b, 50% sesame- 50% bean (50s50b, 75% sesame- 25% bean (75s25b, monoculture of sesame (100s, 10% bean- 100% sesame (10b100s, 20% bean- 100% sesame (20b100s, 30% bean- 100% sesame (30b100s, 100% bean- 10% sesame (100b10s, 100% bean- 20% sesame (100b20s, and 100% bean- 30% sesame (100b30s. Planting was done using common varieties of the region (Esfarayen and Derakhshan varieties for sesame and bean

New insights into the interactions between cork chemical components and pesticides. The contribution of π-π interactions, hydrogen bonding and hydrophobic effect.

Science.gov (United States)

Olivella, M À; Bazzicalupi, C; Bianchi, A; Fiol, N; Villaescusa, I

2015-01-01

The role of chemical components of cork in the sorption of several pesticides has been investigated. For this purpose raw cork and three cork extracted fractions (i.e. cork free of aliphatic extractives, cork free of all extractives and cork free of all extractives and suberin) were used as sorbent of three ionic pesticides (propazine, 2,4-dichlorophenoxy acetic acid (2,4-D) and alachlor) and five non-ionic pesticides (chlorpyrifos, isoproturon, metamitron, methomyl and oxamyl) with a logKow within the range -0.47 to 4.92. The effect of cations on the ionic pesticides, propazine and 2,4-D sorption was also analyzed. Results indicated that the highest yields were obtained for chlorpyrifos and alachlor sorption onto raw cork (>55%). After removal of aliphatic extractives sorption of all pesticides increased that ranged from 3% for propazine to 31% for alachlor. In contrast, removal of phenolic extractives caused a sorption decrease. Low sorption yields were obtained for hydrophobic pesticides such as metamitron, oxamyl and methomyl (cork fractions and extremely low when using raw cork (cork toward aromatic pesticides. Results presented in this paper gain insights into the cork affinities for pesticides and the interactions involved in the sorption process and also enables to envisage sorption affinity of cork for other organic pollutants. Copyright © 2014 Elsevier Ltd. All rights reserved.

Effect of Biofertilizers and Irrigation Intervals on Yield Component and Yield of Fenugreek (Trigonella foenum- graecum L.

Directory of Open Access Journals (Sweden)

M. Jaberi

2016-02-01

Full Text Available Introduction Drought is one of the most important factors whichdecrease crop production in arid and semi-arid regions of the world (1, 20. Appropriate nutritional management has an effective role in the resistance to environmental stresses on crops (7. An important issue about sustainability of food production is the maintenance of soil fertility through the use of organic matter and biofertilizers. One option to increase agricultural production is the use of beneficial soil microorganisms such as PGPR and fungi (45. This group of bacteria through biological fixation of nitrogen, increase phosphorus and potassium solubility, an increasethe availability of mineral elements in the soil, inhibits pathogen appearance and producehormones that regulate the growth of plants to affect crop yield (18, 47. Mycorrhiza enablesymbiosis with the roots of most crop plants, through the availability of phosphorus, nitrogen and other nutrients and thus increases water absorption and produces plant hormones, increases resistance to pathogens and environmental stresses, strengthens the soil microbial community and induces improving the growth and performance of plants in agricultural systems (5, 32, 37, 40.Fenugreek (Trigonella foenum- graecum L.is an annual herbaceous plant that reaches a height of 50 cm (14. Since limited water is at very critical level now, the importance of further research in this area is felt. So, the study of medicinal plants considring water management and organic food is very important. Therefore, the aim of this research is to evaluate the effect of organic and biofertilizers and irrigation on yield and yield components of fenugreek in Birjand. Materials and Methods In order to study the effects of irrigation intervals and biofertilizers on quantitative traits and yield of fenugreek, an experiment was carried out in a split plot based on a complete randomized block design with 3replications at the research station, Faculty of Agriculture

Effects of Salinity on Yield and Component Characters in Canola (Brassica napus L. Cultivars

Directory of Open Access Journals (Sweden)

Ahmad BYBORDI

2010-03-01

Full Text Available Cultivars �Okapi�, �SLM046�, �Elite�, �Fornax� and �Licord� Brassica napus were tested for yield and component characters under different levels of salinity. The variations due to salinity levels, cultivars and cultivarxsalinity (interaction were significant for different characters. The variable degrees of increase and decrease of regression coefficient estimate mates (curve estimation showed the performance as influenced by different salinity levels. The performance of Brassica napus variety in plant height and days to first flowering was the best for �SLM046�, �Okapi� �SLM046� and �Okapi� cultivars. �SLM046� showed the best performance in days to maturity, followed by �Licord� and �Elite�. �Okapi� performed better than others regarding the increased number of seeds per plant and seed yield per plant, followed by �Fornax�. Considering all characters, the most tolerance ability was found in �SLM046� and �Okapi�, against different levels of salinity.

Effect of Plant Growth Promoting Rhizobacteria (PGPR on Yield and Yield Components of Sesame (Sesamum indicum l. with Emphasize on Environmental Friendly Operations

Directory of Open Access Journals (Sweden)

P Rezvani Moghaddam

2015-07-01

Full Text Available In order to evaluate the effects of different plant growth promoting rhizobacteria (PGPR on yield and yield components of sesame, an experiment was conducted in the form of Randomized Complete Block Design with three replications at Research Station, Faculty of Agriculture, Ferdowsi University of Mashhad in year 2009. Treatments were: 1 Nitragin (containing of Azotobacter sp., Azospirillum sp. and Pseudomonas sp., 2 Nitroxin (containing of Azotobacter sp. and Azospirillum sp., 3 Super nitro plus (containing of Azospirillum sp., Bacillus sp. and Pseudomonas sp., 4 Phosphate suloblizing bacteria (containing of Bacillus sp. and Pseudomonas sp., 5 Bio Phosphate (containing of Bacillus sp. and Pseudomonas sp., 6 Nitroxin + Phosphate suloblizing bacteria, 7 Nitroxin + Bio Phosphate and control. The results showed that seed yield affected by PGPR and Nitroxin + Phosphate suloblizing bacteria treatment had superior effect on seed yield compared to other treatments. Superior effect of Nitroxin + Phosphate suloblizing bacteria treatment also was shown on plant seed weight and harvest index. Nitragin, Nitroxin + Bio Phosphate, Nitroxin + Phosphate suloblizing bacteria, Bio Phosphate, Phosphate suloblizing bacteria, Nitroxin treatments increased dry weight of capsules per plant of 62, 53, 51, 36 and 30 percent compared to control, respectively. Although, the effect of PGPR was not significant on sesame seed oil content but Bio Phosphate and Nitragin treatments increased seed oil content by 1 and 1.5 percent, respectively. In general, results showed utilization of PGPR can improve seed yield and seed oil content, which can decrease dependence of sesame seed production to chemical fertilizer, decrease negative environmental impacts and as an ecofriendly inputs can help to produce crops and sustainable agriculture guidlines.

Effect of Application of Nitrogen, Phosphorus and Organic Fertilizers on Yield and Yield Components of Bean (Phaseolus vulgaris L. in Lahijan, Northern Iran

Directory of Open Access Journals (Sweden)

K. Mansour Ghanaei Pashaki

2017-02-01

Full Text Available In order to study the effect of application of nitrogen, phosphorus and biologic fertilizers on yield and yield components of native bean, an experiment was conducted as factorial in randomized complete block design with three replications in Lahijan, northern Iran in 2013. Treatments consisted of chemical nitrogen fertilizer (0, 60 and 120 kg ha-1 urea, chemical phosphorus fertilizer (0, 40 and 80 kg ha-1 P2O5 and mixture of rhizobium, bacillus and pseudomonas biofertilizers (application and on application. The maximum and minimum seed yields (1556 kg ha-1and 451 kg ha-1 were obtained at the presence of 120 kg ha-1 urea with 80 kg ha-1 P2O5 and control (no fertilizers, respectively. The results showed that seed yield was significantly affected by interactions of nitrogen and phosphorus, and phosphorus with bio-fertilizers. The triple interaction effect of nitrogen, phosphorus and biofertilizers was significant on pod number per plant, seed number per pod, seed number per plant and 100 seed weight. The maximum pod number per plant, seed number per pod and 100 seed weight were found in interaction of 120 kg ha-1 urea and 40 kg ha-1 P2O5 with biological fertilizers. Overall, it seems that application of biological phosphorus with both N and P chemical fertilizers is more beneficial to bean; however, the present one-year study needs to be continued in years ahead to ascertain our results.

Effects of location and year on grain yield and its components in wheat genotypes developed from seed irradiation treatment

International Nuclear Information System (INIS)

Amer, I.M.; El-Rassas, H.N.; Abdel-Aleem, M.M.

1994-01-01

Eight mutant lines derived from gamma ray treatments and their parental cultivar sokha 69 of bread wheat were evaluated for grain yield per feddan, straw yield per feddan, harvest index, spike length, spike yield and weight of 1000-kernels at two locations (El-Fayoum and Inshas) in two seasons, 1991/92 and 1992/93. Significant effects of location on yield and yield components were found and the year significantly affects all the studied traits except grain yield per feddan. A significant location genotype interaction was detected for spike length, 1000-kernel weight and straw yield per feddan. In addition, year genotype interaction was significant in weight of 1000-kernels, straw yield per feddan and harvest index. The statistical analysis showed a significant difference among genotypes over all environments for spike length, 1000-kernel weight, straw yield per feddan and harvest index. However, these did not reflect significant effect on grain yield per feddan over all environments because it has a highly compensation ability. Meanwhile, mutant L 1 2 -1 exhibited significantly higher straw yield than sokha 69, when averaged over two seasons at El-Fayoum. Mutant L 1 9 -1 gave higher weight of 1000-kernels, spike length and harvest index than the other genotypes at low-yielding location (Inshas). It seems to be stable over a wide range of environments. 3 tabs

The Effect of Drought Stress on Morphological Characteristics and Yield Components of Medicinal Plant Fenugreek

Directory of Open Access Journals (Sweden)

N. Bazzazi

2013-06-01

Full Text Available Fenugreek (Trigonella foenum-graecum L. is one of the oldest medicinal plants. In order to study water-stress effects on some morphological characteristics of fenugreek, an experiment was carried out in a strip plots based on randomized complete blocks design with three replicates, at Research Farm of Shahrekord University, Shahrekord, Iran, in 2010. The first factor was allocated to four water stress levels (irrigation after depletion of 20 (as control, 40, 60 and 80% of available soil moisture and the second factor was six fenugreek landraces (Shiraz, Ardestan, Tirancheh, Yazd, Jahrom and Hindi. The results of ANOVA and comparison of means indicated that the effect of water stress was significant for all traits and variation was observed among landraces for all the studied characteristics. Mean comparison showed that drought stress reduced days to flowering, days to maturity, plant height and yield components (number of pods per plant, number of seeds per pod and 1000-kernel weight. It was also revealed that water stress caused reduction in biological yield (43% and grain yield (42.3% of all genotypes. Comparison between landraces indicated that maximum biological and grain yield belonged to Ardestan landrace. Assessment of cluster analysis showed that it was possible to classify Ardestan, Shiraz and Tirancheh as a single group having tolerance to water stress. In general, based on obtained results, the Ardestan landrace, with 22.37 g/plant, had the highest biological yield and Hindi landrace, with 73.83 days to maturity, was the most early-maturing one.

Evaluation of the Effect of Different Irrigation Levels of Drip Irrigation (Tape on Yield and Yield Components of Corn

Directory of Open Access Journals (Sweden)

mohammad karimi

2016-02-01

Full Text Available Introduction: One of the serious problems in the further development of maize cultivation is increasing irrigation efficiency. Using conventional irrigation causes a shortage of water resources to increase the acreage of the crop. With regard to the development of maize cultivation, agronomic and executable methods must be studied to reduce water consumption. Using drip irrigation system is most suitable for row crops. Hamedi et al. (2005 compared drip (tape and surface irrigation systems on yield of maize in different levels of water requirement and indicated that drip irrigation increases the amount of yield to 2015 kg/ha and water use efficiency to 3 time. Kohi et al. (2005 investigated the effects of deficit irrigation use of drip (tape irrigation on water use efficiency on maize in planting of one and two rows. The results showed that maximum water use efficiency related to crop density, water requirement and planting pattern 85000, 125% and two rows, respectively with 1.46 kg/m3. Jafari and Ashrafi (2011 studied the effects of irrigation levels, plant density and planting pattern in drip irrigation (tape on corn. The results showed that the amount of irrigation water and crop density on the level of 1% and their interactions and method of planting were significant at the 5 and 10% on water use efficiency, respectively. The yield was measured under different levels of irrigation, crop density and method of planting and the difference was significant on the level of 1%. Lamm et al. (1995 studied water requirement of maize in field with silt loam texture under sub drip irrigation and reported that water use reduced to 75%; but yield of maize remained at maximum amount of 12.5 t/ha. The objective of this study was to evaluate the drip (tape irrigation method for corn production practices in the Qazvin province in Iran. Materials and Methods: In this study, yield and yield components of corn (SC 704 were investigated under different levels of

yield and yield componemts of extra early maize (zea mays l.)

African Journals Online (AJOL)

SHARIFAI

maize crop and improve the soil structures and chemical nutrients of the soil. The significant interaction between intra-row spacing and poultry manure on cob diameter, 100 grain weight and grain yield showed the importance of poultry manure on yield and yield components of maize crop. Poultry manure increases both ...

Effect of different intercropping patterns on yield and yield components of dill and fenugreek

Directory of Open Access Journals (Sweden)

Behzad Shokati

2014-12-01

Full Text Available A field experiment was conducted based on randomized complete blocks design (RCBD in three replications during 2011 at the research farm of university of Tabriz, Iran. In this study two medicinal plants, dill (Anethum graveolens L. and fenugreek (Trigonella foenum-graecum intercropped at different additive (1:20, 1:40 and 1:60 and different replacement (1:1, 1:2 and 1:3 series. Results showed that dill plant at additive treatment especially in 1:20 and 1:60 series had maximum plant fresh and dry weights, umbels per plant, 1000 seed weight, seeds per plant, biological yield and harvest index. However, fenugreek plant at replacement treatment especially in 1:3 and 1:2 series had maximum biological yield, pod in main stem, pod in branches, seeds per pod, seed weights and grain yield. Fenugreek as a medicinal, forage and legume crop promote dill grows characters and could be an effective plant in intercropping systems.

Effects of phosphorus and zinc applications on the yields and yields ...

African Journals Online (AJOL)

Effects of phosphorus and zinc applications on the yields and yields components of sole early maturing maize ( Zea mays ) and bambaranut ( Vigna subterranean Thour. ) and in intercrop under southern guinea savannah ecology zone.

Effect of soil structures and nitrogen nutrition on yield and yield components of Barley: utilization of δC13 as an indicator of water deficit

International Nuclear Information System (INIS)

Wibawa, Gede; Menard, J.M.

1995-01-01

The objective of this study was to analyze the effect of combination between soil structures and nitrogen doses on the yield and its components. The treatments consisted of three soil structures: loose(O), block(B) and alternate between loose and compact(G) and five doses of nitrogen ranging from 0 to 200 kg/ha which were tested at TASS2, TASS3 and TASS4. Results showed that soil structures influenced nitrogen absorption and yield mainly through grain number/m2. The soil structure effect depends greatly on the climate. This study proved that carbon isotopic composition δC 1 3 related greatly to the carbon and water nutrition of the plant, therefore it can be used as an indicator of water deficit. (author), 17 refs, 2 tabs, 7 figs

The Effect of High Concentrations of Glufosinate Ammonium on the Yield Components of Transgenic Spring Wheat (Triticum aestivum L.) Constitutively Expressing the bar Gene

OpenAIRE

Áy, Zoltán; Mihály, Róbert; Cserháti, Mátyás; Kótai, Éva; Pauk, János

2012-01-01

We present an experiment done on a bar + wheat line treated with 14 different concentrations of glufosinate ammonium—an effective component of nonselective herbicides—during seed germination in a closed experimental system. Yield components as number of spikes per plant, number of grains per spike, thousand kernel weight, and yield per plant were thoroughly analysed and statistically evaluated after harvesting. We found that a concentration of glufosinate ammonium 5000 times the lethal dose w...

Effects of mulch practices on fresh ear yield and yield components of sweet corn

OpenAIRE

KARA, Burhan; ATAR, Bekir

2013-01-01

The experiment was carried out in the vegetation seasons of 2010 and 2011. The main purpose of the study was to determine the effects of mulch practices (a control-unmulched treatment, a plastic mulch treatment, and a straw mulch treatment) on fresh ear yield and some yield-related traits of sweet corn according to 3 sowing dates: 1 April, 15 April, and 1 May, respectively. The main effects of sowing dates were significant for the harvest period, the emerging rate from soil, the fresh ear yie...

Effect of Integrated Weed Management Methods on Yield and Yield Components of Corn (Zea mays L. in Kermanshah Province, Iran

Directory of Open Access Journals (Sweden)

R. Amini

2017-08-01

Full Text Available Introduction: Corn (Zea mays L. is cultivated widely throughout the world and has the highest production among the cerealsafter rice and wheat. In Iran the total production of corn in 2013 was more than 2540000 tons. Weeds are one of the greatest limiting factors to decrease corn yield in Iran as the average yield loss due to weeds in the fields of Kermanshah in 2009 was 17.32 %. The herbicides are the main weed control method in conventional cropping systems but their application has been increased herbicide resistant weeds and environmental pollution. Integrated weed management combines all applicable including chemical and non-chemical methods to reduce the effect of weeds in the cropping systems. Thus, Weed control strategies such as tillage, mulch, cover crops and intercropping could be used for integrated weed management of corn. Previous studies showed that crop residues such as rye (Secale sereal L., wheat (Triticum aestivum L., barley (Hordeum vulgare L. and clover (Trifolium sp., cover crops and living mulch could inhibit weed germination and growth. Therefore the objective of this study was evaluating the effects of some integrated weed management treatments on weed characteristics, yield components and grain yield of corn. Materials and methods: In order to evaluate the effect of some weed management treatments on corn (Zea mays L. yield an experiment was conducted in 2014 in Ravansar, Kermanshah, Iran. This study was arranged based on randomized complete block design with 10 treatments and three replications. The weed management treatments were including 1-chemical control followed by mechanical control (application of nicosulfuron at a dose of 80 g.a.i.ha-1 + cultivator 40 days after emergence 2- chemical control followed by mechanical control (application of 2,4-D+MCPA at a dose of 675 g.a.i.ha-1 + cultivator 40 days after emergence 3- cultural control followed by mechanical control (planting hairy vetch (Vicia villosa in the fall

Effect of zinc and plant-population on the yield and yield components of maize (zea mays L.)

International Nuclear Information System (INIS)

Kakar, K.M.; Sadiq, S.A.; Tariq, M.

2005-01-01

A field experiment was conducted during 2001 to study the effect of two levels of zinc (0 and 5 kg Zn ha-J) and three plant-densities (60,000, 80,000 and 100,000 plants ha-J) on the performance of two varieties of maize Azam and Pahari and two hybrids N7989 and Babar, at Malakandher Farm of NWFP Agricultural University, Peshawar. Zinc at the rate of 5 kg ha-J increased the cob yield, grain yield and 1000-grain weight, while increase in plant-density significantly increased the number of grains cob-J, number of cob-plant-J, cob-yield, grain-yield and 1000-grain weight. Results revealed that the highest plant-density of 100,000 plant ha-J decreased the number of cobs plant-J, number of grains cob-J and 1000-grain weight. Maximum number of cobs plant-J (0.87), number of grains cob-J (313), cob yield (4602 kg ha-J), grain yield (4222 kg ha-J) and 1000-grain weight (249 g) were obtained with plant- density of 80,000 plant ha-J. The maximum grain-yield of 4333 kg ha-J was recorded in plots of hybrid variety N7989. (author)

Genetic variability, correlation and path coefficients of yield and its components analysis in pumpkin (Cucurbita moschata Duch Ex Poir

Directory of Open Access Journals (Sweden)

GM Mohsin

2017-06-01

Full Text Available Genetic variability, correlation and path coefficient were studied for yield and yield component traits in twenty one diverse genotypes of pumpkin. Highest genotypic coefficient of variation was recorded for fruit length (cm, single fruit weight (kg, Brix (% and yield per plant (kg. Heritability estimates in broad sense were higher for almost all the characters. The characters namely, fruit length, single fruit weight, yield per plant and brix% had high genotypic coefficient of variation coupled with heritability gave high genetic advance expressed as percentage of mean ranged from 76.84 to 96.06 which indicated that these characters were less influenced by environment confirming additive gene action, and therefore, selection of these characters would be more effective for yield improvement of pumpkins. Total six traits likely fruit length, fruit diameter, flesh thickness, single fruit weight and number of fruits per plant were positively and significantly associated with yield per plant. Path coefficient analysis also revealed maximum contribution of single fruit weight (0.869 to yield and this was followed by the contribution of number of fruit per plant (0.527 at genotypic level.

The Effect of Nitroxin Biofertilizer and Foliar Applicatin of Micronutrients Time Consumption on Yield and Yield Components of New Wheat Cultivars under Khorramabad Climatic Conditions

Directory of Open Access Journals (Sweden)

A. Vaez

2016-02-01

Full Text Available Introduction In order to study the effects of Nitroxin biofertilizer and foliar application of micronutrients time consumption on yield and yield components of new wheat cultivars (Triticum aestivum & T. durum under Khorramabad climatic conditions, an experiment was conducted as factorial based on a randomized complete block design with three replications at the research farm khorramabad during growing season of 2012-2013. Considering the positive effect of inoculation with bio-fertilizer and foliar Nitroxin micronutrients and reaction of cultivars to this type of fertilizer instead of chemical fertilizers and the importance of wheat as one of the main crops, this study aims to determine the most appropriate time for foliar and Nitroxin application of micronutrients at the different stages of plant growth and bio-fertilizer application on yield and yield components. Materials and Methods The first factor was considered in six levels: N0: The lack of the seed insemination with nitroxin biofertilizer and without the foliar application of micronutrients (control, N1: the seed inoculation with the nitroxin biofertilizer, N2: the foliar application of micronutrients at the jointing stage, N3: the foliar application of micronutrients at the heading stage, N4: the seed insemination with nitroxin biofertilizer and foliar application of micronutrients at the jointing stage, N5: the seed insemination with nitroxin biofertilizer and foliar application of micronutrients at the heading stage. The second factor was considered at two levels, consisting: V1: Parsi cultivar and V2: Dena cultivar. MSTATC Software was used for data analysis and means were compared by Duncan's multiple range test at the 5% level. Results and Discussion In this experiment the grain yield, biological yield, harvest index, 1000- grain weight, spike number per m-2, grain number per spike and spikelet number per spike of wheat were studied. The results of the data variance analysis has

Effect of Arbuscular Mycorrhizal Fungi and Organic Fertilizers Application on Yield Components of Two Wheat Cultivars

Directory of Open Access Journals (Sweden)

A. Gholamalizadeh Ahangar

2014-12-01

Full Text Available This investigation was conducted in order to evaluate the direct effects of organic and bio - fertilizers on yield components of two native wheat cultivars, Bolani and cross - Bolani. The experiment conducted as a factorial in a completely randomized design with three replications. Treatment includes fertilizer factor: vermicompost (F1, vermicompost + compost (F2, vermicompost + mycorrhiza (F3, compost + vermicompost + mycorrhiza (F4, compost (F5, mycorrhiza + compost (F6, mycorrhiza (F7 and control (no fertilizer application F8 and cultivar factor includes two cultivar Bolani (C1 and cross - Bolani (C2. The results showed that the interaction effect of combined treatments (F7C2 of high yield (1.13 g.pot-1 obtained. The treatment combination (F7C2 of (0.355 was highest harvest index. The high correlation between weight per plant with plant height, spike length, grain yield and harvest index were observed. Generally the combined application of vermicompost and mycorrhiza cultivar cross - Bolani is more suitable for grain production.

Simulation of Sediment Yield in a Semi-Arid River Basin under Changing Land Use: An Integrated Approach of Hydrologic Modelling and Principal Component Analysis

Directory of Open Access Journals (Sweden)

Charles Gyamfi

2016-11-01

Full Text Available Intensified human activities over the past decades have culminated in the prevalence of dire environmental consequences of sediment yield resulting mainly from land use changes. Understanding the role that land use changes play in the dynamics of sediment yield would greatly enhance decision-making processes related to land use and water resources management. In this study, we investigated the impacts of land use and cover changes on sediment yield dynamics through an integrated approach of hydrologic modelling and principal component analysis (PCA. A three-phase land use scenario (2000, 2007 and 2013 employing the “fix-changing” method was used to simulate the sediment yield of the Olifants Basin. Contributions in the changes in individual land uses to sediment yield were assessed using the component and pattern matrixes of PCA. Our results indicate that sediment yield dynamics in the study area is significantly attributed to the changes in agriculture, urban and forested lands. Changes in agriculture and urban lands were directly proportional to sediment yield dynamics of the Olifants Basin. On the contrary, forested areas had a negative relationship with sediment yield indicating less sediment yield from these areas. The output of this research work provides a simplistic approach of evaluating the impacts of land use changes on sediment yield. The tools and methods used are relevant for policy directions on land and water resources planning and management.

6 Grain Yield

African Journals Online (AJOL)

create a favourable environment for rice ... developing lines adaptable to many ... have stable, not too short crop duration with ..... Analysis of variance of the effect of site and season on maturity, grain yield and plant ..... and yield components.

Allelopathy of weed extracts on yield and its components in four cultivars of rice (Oryza sativa L.

Directory of Open Access Journals (Sweden)

Ali MOHADESI

2011-07-01

Full Text Available Weeds are enemies to the crop plants and have harmful effects on agricultural crops due to several factors such as competition for space, light and nutrients. Allelopathic effects of weed extracts were studied on grain yield and yield components of rice. The experiment was carried out in the Rice Research Institute of Chaparsar, in 2006- 2007, in Tonekabon, Iran (latitude 36°54’ N, longitude 50° 40’E, level -20 m altitude, split plot on basis of randomized completely block design (RCBD with 4 replications. Results showed highly significant differences suggesting substantial to moderate phenotypic variability in most parameters evaluated except number of empty grain and 1000 -grain weight. Also, most yield of single plant obtained from umbrella sedge extract (28.5 g. It seems that umbrella sedge had least minerals in water; it could be affected positively on important factors such as yield of single plant compared to other treatments. Correlation coefficient analysis revealed significant and negative correlation between number of empty grain and yield of single plant (r=-0.42***. It’s implies that grain yield magnitude of Nemat cultivar exhibiting the least number of empty grain. Although yield of single plant was not affected neither by plant height nor number of tiller. In addition, irrigation water due to existence of high mineral and chemical pesticides in upstream of station farms severely was reduced yield. Also, results of this research showed that weed extracts haven’t very allelopathic effect on rice and in end of growing season, that’s better, plant leftover return and remain in field.

Correlation and path-cofficient analysis of seed yield and yield ...

African Journals Online (AJOL)

This study was undertaken in order to determine the association among yield components and their direct and indirect effects on the seed yield of confectionery sunflower. 36 confectionery sunflower populations originated from different regions of Northwest Iran were characterized using 11 agromorphological traits ...

Assessing the Effect of Organic Compounds, Biofertilizers and Chemical Fertilizers on Morphological Properties,yield and Yield Components of Forage Sorghum (Sorghum bicolor

Directory of Open Access Journals (Sweden)

A.H Saeidnejad

2012-12-01

Full Text Available Recently, using the source of organic fertilizers and biofertilizers in sustainable crop production is growing. In order to evaluate the effect of organic compounds, biofertilizers and chemical fertilizer on morphological properties, yield and yield components of forage Sorghum (sorghum bicolor a field experiment was conducted in the Research Farm, College of Agriculture, Ferdowsi University of Mashhad in 2008.The treatments were seed inoculation with the combination of Azotobacter chroococcum and Azospirillum brasilense, Compost (15 t/ha, Vermicompost (10 t/ha, seed inoculation with Azotobacter and Azospirillum and compost (10t/ha, seed inoculation with Azotobacter chroococcum and Azospirillum brasilense and Vermicompost (7t/ha, seed inoculation with Pseudomonas flurescence, seed inoculation with Pseudomonas flurescence and Azotobacter chroococcum and Azospirillum brasilense combination, seed inoculation with Pseudomonas flurescence and compost (15t/ha, chemical fertilizer (80 kg/h urea fertilizer and 50 kg/h super phosphate fertilizer and control. Harvesting was performed in 2 cuts in flowering stage. Plant height, number of tiller per plant and SPAD reading was significantly affected by the treatments. Stem diameter was not affected by any treatments. There was a significant difference among all treatments in terms of fresh and dry forage yield. There were no significant differences among all treatments in terms of stem and leaf dry matter. In general, result of this experiment indicated that organic amendments and biofertilizers could be acceptable alternatives for chemical fertilizers.

The Role of Iron and Zinc on Tuber Yield and Yield Components of Potato

Directory of Open Access Journals (Sweden)

Elham Jam

2015-08-01

Full Text Available The soils of potato production fields in Ardabil due to alkalinity and not having a proper crop rotations are deficient in micronutrients. To evaluate the effect of these micronutrients on the yield and some traits affecting potato tubers an experiment was conducted in a complete randomized block design with three replications in Ardabil during 2012. Micronutrient treatments used were the various concentrations of iron and zinc (0.002, 0.004 and 0.008 concentrations of these elements as Fe1Zn1, Fe1Zn2, Fe1Zn3, Fe2Zn1, Fe2Zn2, Fe2Zn3, Fe3Zn1 and Fe3Zn2 and a control treatment (Fe0Zn0. Analysis of variance of traits under study showed statistically significant differences among treatments in terms of tuber yield, number of tubers per plant, tuber size, skin thickness and volumetric weight and dry weight of tubers. The highest tuber yield (48.10 t.ha-1 and maximum skin thickness were obtained from Fe1Zn3 treatment. The highest tuber number belonged to Fe2Zn1 (0.004 and 0.002 concentrations of iron and zinc and Fe1Zn3 (0.002 and 0.008 concentrations of iron and zinc. Tuber weights higher than 35 grams and higest volumetric tuber weight were produced by using Fe3Zn2. The conclusion is this that using Fe1Zn3 traetment (0.002 and 0.008 concentrations resulted in highest tuber yield and thickness of tuber skin.

Measuring yield performance of upland cotton varieties using adaptability, stability and principal component analyses

International Nuclear Information System (INIS)

Baloch, M.J.

2003-01-01

Nine upland cotton varieties/strains were tested over 36 environments in Pakistan so as to determine their stability in yield performance. The regression coefficient (b) was used as a measure of adaptability, whereas parameters such as coefficient of determination (r2) and sum of squared deviations from regression (s/sup 2/d) were used as measure of stability. Although the regression coefficients (b) of all varieties did not deviate significantly from the unit slope, the varieties CRIS-5A. BII-89, DNH-40 and Rehmani gave b value closer to unity implying their better adaptation. Lower s/sub 2/d and higher r/sub 2/ of CRIS- 121 and DNH-40 suggest that both of these are fairly stable. The results indicate that, generally, adaptability and stability parameters are independent of each in as much as not all of the parameters simultaneously favoured one variety over the other excepting the variety DNH-40, which was stable based on majority of the parameters. Principal component analysis revealed that the first two components (latent roots) account for about 91.4% of the total variation. The latent vectors of first principal component (PCA1) were smaller and positive which also suggest that most of the varieties were quite adaptive to all of the test environments. (author)

Investigation of Yield and Yield Components of Canary Seed Forage (Phalaris canariensis L. in Response to Different Levels of Irrigation, Organic and Chemical Fertilizers and their integration

Directory of Open Access Journals (Sweden)

V Varnaseri Ghandali

2016-12-01

application on the yield and yield components of the forge of canary seed plant on the path of sustainable agriculture. Materials and Methods To investigate the effects of different levels of irrigation water and integrated management of chemical and organic fertilizers on growth indices, yield and yield components of the Canary seed forage, an experiment was conducted as split plot based on a randomized complete block design with three replications at Agricultural Research Station, College of Agriculture, Ferdowsi University of Mashhad, Iran during growing season of 2013-2014. Different regimes of irrigation were in three levels (60, 80 and 100 percent of water requirement in main plots and fertilizer treatments were in six levels (chemical fertilizer, vermicompost fertilizer, manure, chemical fertilizer + vermicompost fertilizer, chemical fertilizer + manure and control in sub-plots. The amounts of treatment of nitrogen chemical fertilizer (200 kg ha-1 of urea source and 150 kg ha-1 of triple super phosphate were applied in corresponding plots. The amounts of manure fertilizers (30 ton ha-1 and vermicompost (6 ton. ha-1 were determined and applied based on recommended amount of nitrogen. Water requirement of canary seed was estimated by the OPTIWAT software in continental condition of Mashhad . The volume of irrigation water for irrigation treatments was estimated based on 60, 80 and 100 percent of water requirement and was recorded as applied in each round of irrigation. In order to harvest the forage in the emergence stage of 50% spikes of the Canary seed, 10 plants per plot were randomly chosen before harvest and traits such as per plant height and the number of tillers were recorded. Then, considering marginal effects from a surface equivalent to 1.4 m-2, plants were harvested from the height 3-5 cm and the weight of forage produced in each plot was measured and determined by weighing. Then, the harvested forage was transferred to the laboratory and two samples with

Production components and yield of bushing snap bean in conventional and organic production systems

Directory of Open Access Journals (Sweden)

Guilherme Renato Gomes

2017-10-01

Full Text Available Production systems influence crops differently, mainly in terms of yield. However, there are few studies that have evaluated different bushing snap bean genotypes in different systems. Thus, this study aimed to evaluate the production components and yield of bushing snap beans in conventional and organic production systems. The experimental design was a randomized complete block, in a factorial 6 × 2 arrangement, corresponding to six genotypes and two production systems, with three replications. The genotypes Isla Manteiga Baixo®, Isla Macarrão Baixo®, Feltrin Vicenza Amarelo Baixo®, and Feltrin Macarrão Napoli®, UEL 1, and UEL 2 were submitted to the following determinations: days to flowering; plant height; medium number of pods per plant; average pod mass, length, and diameter; and yield of commercial pods. A joint analysis of variance was conducted by applying the F test, with mean comparison performed using the Tukey’s test (p < 0.05. Anthesis of the genotypes Feltrin Vicenza Amarelo Baixo, UEL 2, Isla Macarrão Baixo, and Feltrin Macarrão Napoli is anticipated in the conventional production system. The genotype UEL 2 shows higher precocity in anthesis within the conventional system. The genotypes Isla Manteiga Baixo and UEL 1 produce more pods per plant in the conventional system. In the organic system, the genotype Feltrin Macarrão Napoli produces double the number of pods per plant compared with Isla Manteiga Baixo. The organic system leads to greater plant height and average mass, length, and diameter of pods in relation to the conventional system. The commercial pod yield of bushing snap bean is not altered by differences in the production system or genotype.

Yield and its components and some agronomic characters of four mungbean mutants induces by gamma ray

International Nuclear Information System (INIS)

Al-Mosawi, A. R. A.; Ibrahim, A. F.; Azzo, F. Z.; Khadim, A. A.; Ibrahim, W. H.; Abdul-Al-majed, A.

2012-12-01

A field experiment was carried out at the Tuwaitha research station / Iraqi Atomic Energy Commission (past) Ministry of science and Technology (now) in Agricultural seasons 2000 - 2001 to evaluate four mungbean mutants induced by gamma ray compared with local variety and Australian pedigree. The results showed that mutants AMU-45 was superiority on anther mutants and the local in date of flowering (41.50 days), maturity (71.25 days), yield (1609.88 kg/ha) and its components. (Author)

The organic fertilizers in pepper (Capsicum annuum L. and the impact on yield and its components

Directory of Open Access Journals (Sweden)

Juan José Reyes Pérez

2017-10-01

Full Text Available The use of organic fertilizers in the fertilization of crops is an alternative to the problems generated by the intensive use of chemical fertilizers. The objective of this research was to evaluate the application to soil of organics fertilizers compared with a control treatment with chemical fertilization on the yield and its components in pepper (Capsicum annuum L.. Treatments consisted in to apply worm humus, water hyacinth compost, a mixture with 50 % worm humus and 50 % of water hyacinth compost, and a chemical control. It was evaluated fruits quantity per harvest, fruit length, diameter and fruit weight per harvest and yield. Results showed that the plants that were supplemented with worm humus, followed by worm humus + water hyacinth they had significantly better response with respect to the length, diameter and weight of the fruits.

Evaluation of yield and yield components and some agronomic traits of white bean genotypes under Karaj climate

Directory of Open Access Journals (Sweden)

M. Ebrahimi

2016-04-01

Full Text Available In order to study compatibility of 30 white bean genotypes under Karaj climate, an experiment was conducted based on randomized Complete Block Design with four replications. Evaluation and statistical analysis was performed for 18 important traits. Analysis of variance results showed that there are significant differences between varieties for all traits. Results of genotypes means comparison with Duncan’s multiple range test showed that genotype No. 29 was better than others in plant height, yield, and biological yield, seed no. per plant and pod weight traits. Simple correlation coefficients were significant between yield and weight of pod, biological yield, number of seed per plant, number of pod per plant, plant height, width of pod and number of seed per pod. Only pod length was negative correlated with yield between all investigated traits. Cluster analysis with UPGMA method arrangement genotypes into three groups. According to this experiment results we can recommend 29 and 30 genotypes for Karaj condition

Study of Cytokinin and Auxin Hormones and Planting Pattern Effects on Yield and Yield Components of Grain Maize (Zea mays L. under Saline Conditions

Directory of Open Access Journals (Sweden)

D Davani

2016-07-01

Full Text Available Introduction Maize (Zea mays L. which belongs to the Poaceae family is the third important cereal crop of the world after wheat and rice. Salinity is one of the major environmental factors limiting plant growth and productivity. Maize is sensitive to salinity. Planting method is a crucial factor for improving crop yield. Planting methods in saline and non-saline conditions are different. Kinetin is one of the cytokinins known to significantly improve the growth of crop plants grown under salinity. Indole acetic acid (IAA is also known to play a significant role in plant tolerance to salt stress. However, little information appears to be available on the relationship between salinity tolerance and auxin or cytokinins levels in plants. In this respect, the objective of this study was to study the effects of foliar applications of cytokinin and auxin hormones on yield and yield components of grain maize under different planting patterns in saline conditions. Materials and Methods The experiment was carried out at Bushehr Agricultural and Natural Resources Research Center, Dashtestan station with 29° 16´ E latitude and 51° 31´ N, longitude and 70 m above the see surface during the 2013 growing season. Dashtestan region is a warm-arid region with 250 mm precipitation per year. The field plowed by April 2013 and then prepared and sowed by August 2013. There were five rows with 75 cm distance. The experiment was conducted as a split-plot factorial design based on complete randomized blocks with three replications. Planting pattern (ridge planting, double rows of planting on a ridge in zigzag form and furrow planting as the main factor and time of cytokinin (0 as a control, V5- V6 stage and V8- V10 stage and auxin (0 as a control, silking stage, two weeks after silking stage foliar-applied was considered in a factorial. Cytokinin (Benzyl Adenine, Merck and Auxin (Indole-3-Butiric Acid, Merck were sprayed on the entire plant in the evening with

Influence of Inter and Intra-rows Spacing on Yield and Yield ...

African Journals Online (AJOL)

Abyssinia

yield and yield components of fresh market(Bishola) and processing (Cochoro) tomato cultivars. ... row spacing had a significant effect on plan canopy width, above ground dry biomass, ... Poor varietal performance and management practices that includeinter and intra-row spacing ..... of assimilate export from the leaves.

Effect of Zeolite, Selenium and Silicon on Yield, Yield Components and Some Physiological Traits of Canola under Salt Stress Conditions

Directory of Open Access Journals (Sweden)

A Bybordi

2016-07-01

Full Text Available Introduction Canola can be cultivated in large areas of the country due to its specific characteristics such as suitable composition of the fatty acids, its germination ability under low temperature, as well as its good compatibility with different climates. Canola is a high demanding crop in terms of fertilizers so that it uptakes considerable amount of nutrients from the soil during the growing season. Canola cultivation in poor soils or application of imbalanced fertilizers, especially nitrogen, can reduce qualitaty and quantity of final yield. On the other hand, salinity is known as one of the major limiting factors in canola production. Therefore, the aim of this study is the application of zeolite, selenium and silicon treatments to amend soil and increasing salinity tolerance in canola. Materials and Methods In order to study the effect of soil applied zeolite and foliar application of selenium and silicon on yield, yield components and some physiological traits of canola grown under salinity stress, a factorial experiment in randomized complete block design was conducted in Agriculture and Natural Resource Research Center in East Azerbaijan during 2011-2013 cropping seasons. Zeolite was applied at three levels (0, 5 and 10 ton ha-1 and foliar selenium and silicon were applied at three levels as well (each one zero, 2 and 4 g l-1. For this purpose, seedbed was prepared using plow and disk and then plot were designed. Canola seeds, cultivar Okapi, were sown in sandy loam soil with 4 dS.m-1 salinity at the depth of 2-3 cm. Irrigation was performed using local well based on 60% field capacity using the closed irrigation system. Potassium selentae and potassium silicate were used for selenium and silicon treatments. Treatments at rosette and stem elongation stages were sprayed on plants using a calibrated pressurized backpack sprayer. At flowering stage, photosynthesis rate was recorded. Then leaf samples were randomly collected to assay

Description of Some Ecological Factors in Three Forest Sites in Lorestan Province and Their Impact on Myrtle (Myrtus communis L. Essential Oil Yield and Chemical Components

Directory of Open Access Journals (Sweden)

Z. Mir-Azadi

2013-03-01

Full Text Available Due to the side effects of chemical drugs, special attention is given recently to pharmaceutical plants. Myrtle (Myrtus communis L. is one of the valuable pharmaceutical plants, which is distributed over the vast areas of Iran. Yield and components of essential oil of this plant is dependent on ecological and genetic factors. In order to describe some ecological factors that affect myrtle in Lorestan province, three forest sites (Sepiddasht, Chame-moord, and Hamzeh Camp were selected. Some effective ecological factors on type of essential oil were measured and compared among the sites. To compare the yield and components of essential oil, myrtle leaves were collected during flowering stage in each site. Leaves were dried in open air conditions and the oil was extracted by distillation. Yield of essential oil was calculated and its components were identified by GC and GC/MS. Results showed that maximum yield belongs to Sepiddasht site. The altitude and soil Na, P, and organic carbon content of this site is quite different from other two sites. The main components of essential oils of these three sites had considerable differences. The amount of 9,10 anthracenedione was 29.1% in Sepiddasht site, while it was not found in the oil of Chame-moord site. It seems that differences in ecological and soil properties of the tree sites could have major effect on essential oil yield and its composition.

Systematics of Fission-Product Yields

International Nuclear Information System (INIS)

Wahl, A.C.

2002-01-01

Empirical equations representing systematics of fission-product yields have been derived from experimental data. The systematics give some insight into nuclear-structure effects on yields, and the equations allow estimation of yields from fission of any nuclide with atomic number Z F = 90 thru 98, mass number A F = 230 thru 252, and precursor excitation energy (projectile kinetic plus binding energies) PE = 0 thru ∼200 MeV--the ranges of these quantities for the fissioning nuclei investigated. Calculations can be made with the computer program CYFP. Estimates of uncertainties in the yield estimates are given by equations, also in CYFP, and range from ∼ 15% for the highest yield values to several orders of magnitude for very small yield values. A summation method is used to calculate weighted average parameter values for fast-neutron (∼ fission spectrum) induced fission reactions

Systematics of Fission-Product Yields

Energy Technology Data Exchange (ETDEWEB)

A.C. Wahl

2002-05-01

Empirical equations representing systematics of fission-product yields have been derived from experimental data. The systematics give some insight into nuclear-structure effects on yields, and the equations allow estimation of yields from fission of any nuclide with atomic number Z{sub F} = 90 thru 98, mass number A{sub F} = 230 thru 252, and precursor excitation energy (projectile kinetic plus binding energies) PE = 0 thru {approx}200 MeV--the ranges of these quantities for the fissioning nuclei investigated. Calculations can be made with the computer program CYFP. Estimates of uncertainties in the yield estimates are given by equations, also in CYFP, and range from {approx} 15% for the highest yield values to several orders of magnitude for very small yield values. A summation method is used to calculate weighted average parameter values for fast-neutron ({approx} fission spectrum) induced fission reactions.

Sequential Path Analysis for Determination of Relationship Between Yield and Yield Components in Bread Wheat (Triticum aestivum.L.

Directory of Open Access Journals (Sweden)

Mohtasham MOHAMMADI

2014-03-01

Full Text Available An experiment was conducted to evaluate 295 wheat genotypes in Alpha-Lattice design with two replications. The arithmetic mean and standard deviation of grain yield was 2706 and 950 (kg/ha,respectively. The results of correlation coefficients indicated that grain yield had significant and positive association with plant height, spike length, early growth vigor and agronomic score. Whereas there were negative correlation coefficients between grain yield and days to physiological maturity and canopy temperature before and during anthesis. Path analysis indicated agronomic score and plant height had high positive direct effects on grain yield, while canopy temperature before and during anthesis, and days to maturity, wes another trait having negative direct effect on grain yield. The results of sequential path analysis showed the traits that accounted as a criteria variable for high grain yield were agronomic score, plant height, canopy temperature, spike length, chlorophyll content and early growth vigor, which were determined as first, second and third order variables and had strong effects on grain yield via one or more paths. More important, as canopy temperature, agronomic score and early growth vigor can be evaluated quickly and easily, these traits may be used for evaluation of large populations.

The Effect of Sowing Date and Plant Density on Yield and Yield Components of Roselle (Hibiscus sabdariffa L. under Jiroft Climate Conditions

Directory of Open Access Journals (Sweden)

B Parsa Motlagh

2017-03-01

Full Text Available Introduction Details of the mutual effect with the agronomic factors, genetic and climatic conditions should be identified to crop a plant in a new area. The purpose of sowing date determination is to find the desired planting time as environmental factors at the time that is suitable for growing, seedling and plant’s survival and resume of growth and development and the plant does not meet unfavorable conditions. The plant density is the most important influencing factors on the development and production of medicinal plants and is an important factor in achieving optimal performance. This research has been conducted for determination of best sowing date and intra row Roselle cultivation in Jiroft area. The objectives of the study were to evaluate the effects of plant density and sowing date on yield, yield components and some of morphological traits on Rosellee (Hibiscus sabdariffa L. and also determine the optimum intra-row spacing and sowing date in order to obtain better yield in Jiroft environment conditions. Materials and Methods The field experiment was split plot in a randomized complete blocks design with three replications in agricultural research field (Long. 57°44´ E., Lat. 28°40´ N., Alt. 650 m of Jiroft University at 2013-2014 growing season. Main plots were sowing date at five levels of 11th and 30th March, 14th April, 5th and 22th May and intra-rows were spaced of 100, 75 and 50 cm as sub plot. Each plot was 3×6 m. The spacing was 1 m between sub-plots, 2 m between main plots and replications. Traits such as plant height, the number of branches, the number of bolls per plant, boll dry weight of plant, sepal yield, seed yield, biomass yield, seed harvest index, and sepal harvest index were measured. Plants were harvested on 1th December, 2014. An area equivalent to 2 × 3 square meters from the center of each plot was harvested by removing the effect of marginal plants from the soil surface to measure the yield of sepal

The effect of organic fertilizers and different sowing dates on yield and yield components of flower and grain of Pot Marigold (Calendula officinalis L.

Directory of Open Access Journals (Sweden)

P Rezvani moghaddam

2016-05-01

Full Text Available In order to find out suitable organic fertilizers for elimination of chemical fertilizers usage and the optimum sowing date in Pot Marigold cultivation, an experiment was conducted in the Agricultural Research Station, Ferdowsi University of Mashhad, Iran, in 2007 growing season. For this purpose a split plot experiment based on completely randomized block design with three replications was used. The main factor consist of four different fertilizers (50 kg.ha-1 N, 40 t.ha-1 Cow manure, 20 t.ha-1 Compost fertilizer and 10 t.ha-1 Hen manure beside control (without fertilizer and three sowing dates (10th April, 1th May and 21th May were allocated as sub factor. The results showed that the length time of emergence to budding, budding to flowering and flowering to ripening decreased by delay in sowing date, significantly. By delay in sowing date, plant height and dry matter also decreased because of reduction of vegetative growing duration. The various fertilizers had not significant effect on developmental stages and morphological characteristics of Pot Marigold. Nitrogen fertilizer and Hen manure in compare of other treatments had significantly (p≤0.05 higher level in number of inflorescences, yield of inflorescences, yield of petal and seed yield. Thus, Hen manure can be a suitable replacement of chemical fertilizers in Pot Marigold cultivation. The various sowing dates showed significant effect on the most measured characteristics of seed and inflorescences yield components of Pot Marigold. The highest of all studied characteristics were obtained in 10th April and 1th May than 21th May sowing dates.

Genetic variability, trait association and path analysis of yield and yield components in mungbean (vigna radiata (L.) wilczek)

International Nuclear Information System (INIS)

Tabasum, A.; Saleem, M.; Aziz, I.

2010-01-01

Genetic variability, heritability along with genetic advance of traits, their association and direct and indirect effects on yield are essential for crop improvement. Ten mungbean genotypes were studied to assess variability and degree to which various plant traits associate with seed yield. Primary and secondary branches, pods per cluster and pod length showed lesser variability while clusters per plant, 100 seed weight and harvest index exhibited intermediate range of variability. Sufficient genetic variability was observed for plant height, pods per plant, total plant weight and seed yield. Moderate to high heritability estimates were found for all traits. Primary and secondary branches per plant, pod length and 100-seed weight exhibited negative and non significant genotypic and phenotypic correlations with seed yield. Plant height showed positive non-significant and significant genotypic and phenotypic correlation. Pods per cluster correlated significantly negative with seed yield. Clusters per plant, pods per plant, total plant weight and harvest index showed positive significant genotypic and phenotypic correlations with seed yield. Positive direct effects were exerted through secondary branches, pods per plant, pod length, 100 seed weight, total plant weight and harvest index while primary branches, plant height, clusters per plant and pods per cluster had negative direct effects. The present findings could be useful for establishing selection criteria for high seed yield in the mungbean breeding. (author)

Effect of low gamma-ray doses and seeding rates on growth, yield and its components as well as seed quality of lentils (lens Culinaries, med.)

International Nuclear Information System (INIS)

Dprgham, E.A.

1999-01-01

To study the effect of low doses gamma-rays and seeding rates on growth, yield and its components as well as seed quality, two experiments were conducted during 1993/1994 and 1994/1995 seasons. Each experiment included treatments which were the combinations of three levels of seeding rates (45,60 and 75kg/fed.) and four doses of gamma-rays (15, 25,35 and 45(Gy). The effect of interaction between seeding rates and gamma doses on growth characters was not significant whereas there was a tendency for improvement of growth characters by increasing gamma doses up to 45 Gy. Different gamma doses caused marked increase for lintil's yield components except the number of seeds/plant while high seeding rates (60 and 75 Kg/fed) reduced significantly the number of pods/plant and number of seeds/plant. For yield, various gamma doses showed significant increase for seed straw yield as compared to the control. However, seeding rates of 60 and 75 kg/fed increased significantly seed and straw yield as compared with the seeding rate of 45 kg/fed (control)

The effects of planting methods and head pruning on seed yield and yield components of medicinal pumpkin (Cucurbita pepo subsp. Pepo convar. Pepo var. styriaca) at low temperature areas.

Science.gov (United States)

Bahrami, R Nikkhah; Khodadadi, M; Pirivatlo, S Piry; Hassanpanah, D

2009-03-15

This experiment carried out to evaluate the effects of planting methods (seed sowing and transplanting) and head pruning (no pruning, pruning after 12th node and pruning after 16th node) on yield and yield components such as number of branches (sub-branches) per plant, fruits per plant, growth, fruit size, weight of fresh fruit, weight of seeds per fruit, number of seeds per fruit and seed yield of medicinal pumpkin. The experiment was carried out based of factorial experiment with Randomized Completely Blocks Design (RCBD) by three replications in Ardabil Agricultural and Natural Resources Researches Station at 2007. Seedlings were grown in heated greenhouse. When the climatic condition became suitable and seedlings were at the four leaves stage, both seeds and seedlings were planted at the same time in the farm. Maintenance operations were done during the growth season. Head pruning treatments were done the forecast time. The results showed that the planting methods had significant effect on the number of ripen fruits per plant, fruits diameter, weight of seeds per fruit, weight of 1000 seeds and seed yield and had no significant effect on the other traits. Also the results indicated that head pruning treatments had significant effects on the number of branches per plant, growth and seed yield and no significant on the other traits. In this experiment the most seed yield (997.8 kg ha(-1)) obtained from transplanting method with head pruning after 12th node and the least seed yield obtained from control.

YIELD AND ITS COMPONENTS IN FIELD PEA (Pisum arvense L. LINES

Directory of Open Access Journals (Sweden)

A TEKELI

2004-04-01

Full Text Available Morphological characters such as main stem length (cm, number of branches per plant, leaf length (cm, number of leaves per main stem, number of leaflets per leaf, diameter of main stem (mm, pods / main stem and seeds / pod as well as agricultural herbage yield (t ha-1, dry matter yield (t ha-1, seed yield (t ha-1, crude protein (% were investigated in Trakya, during the 1999-2002. The maximum main stem length (124.375 cm, leaf length (24.808 cm, number of pods per main stem (16.526, herbage yield (27.881 t ha-1, dry matter yield (7.319 t ha-1 and seed yield (2.590 t ha-1 were determined from the 16-K and 16-DY field pea lines. K line has given higher values than four lines for the number of branches per plant (5.567. Main stem diameter ranged from 3.077 to 4.300 mm. It’s found that the 23.025 leaves/main stem, 6.833 leaflets/leaf, 7.692 seeds/pod and 17.550% crude protein from the field pea lines.

The effect of high concentrations of glufosinate ammonium on the yield components of transgenic spring wheat (Triticum aestivum L.) constitutively expressing the bar gene.

Science.gov (United States)

Áy, Zoltán; Mihály, Róbert; Cserháti, Mátyás; Kótai, Éva; Pauk, János

2012-01-01

We present an experiment done on a bar(+) wheat line treated with 14 different concentrations of glufosinate ammonium-an effective component of nonselective herbicides-during seed germination in a closed experimental system. Yield components as number of spikes per plant, number of grains per spike, thousand kernel weight, and yield per plant were thoroughly analysed and statistically evaluated after harvesting. We found that a concentration of glufosinate ammonium 5000 times the lethal dose was not enough to inhibit the germination of transgenic plants expressing the bar gene. Extremely high concentrations of glufosinate ammonium caused a bushy phenotype, significantly lower numbers of grains per spike, and thousand kernel weights. Concerning the productivity, we observed that concentrations of glufosinate ammonium 64 times the lethal dose did not lead to yield depression. Our results draw attention to the possibilities implied in the transgenic approaches.

Impact of various storage conditions on enzymatic activity, biomass components and conversion to ethanol yields from sorghum biomass used as a bioenergy crop.

Science.gov (United States)

Rigdon, Anne R; Jumpponen, Ari; Vadlani, Praveen V; Maier, Dirk E

2013-03-01

With increased mandates for biofuel production in the US, ethanol production from lignocellulosic substrates is burgeoning, highlighting the need for thorough examination of the biofuel production supply chain. This research focused on the impact storage has on biomass, particularly photoperiod-sensitive sorghum biomass. Biomass quality parameters were monitored and included biomass components, cellulose, hemicellulose and lignin, along with extra-cellular enzymatic activity (EEA) responsible for cellulose and hemicellulose degradation and conversion to ethanol yields. Analyses revealed dramatic decreases in uncovered treatments, specifically reduced dry matter content from 88% to 59.9%, cellulose content from 35.3% to 25%, hemicellulose content from 23.7% to 16.0% and ethanol production of 0.20 to 0.02gL(-1) after 6months storage along with almost double EEA activities. In contrast, biomass components, EEA and ethanol yields remained relatively stable in covered treatments, indicating covering of biomass during storage is essential for optimal substrate retention and ethanol yields. Copyright © 2013 Elsevier Ltd. All rights reserved.

To study of different level of nitrogen manure and density on yield and yield component of variety of K.S.C 704 in dry region of sistan

International Nuclear Information System (INIS)

Dahmardeh, M.; Forghani, F.; Khammari, E.

2008-01-01

Out of three grain of the world, Corn is one of the best, About 7 to 10 thousand years ago in south of Mexico corn become domesticated. In the year 1995 culfivation of corn in the world was 130 mil/ha, and to Total production of the world of corn is 507 M/Tons. Average yield of corn in the year 1995 Among Producer countries was 7.78 To 7.60 t/ha in fance and united state was state was 2.36 To 2.20 t/ha, but in Brazil and Mexico Production of corn was different. With this regards, special manner has been arranged for the suitable cultivation or suitable density plants in one heactar on cultivation variety of K.S.C 704 corn. Also suitable level of Nitrogen manure, this Protect in climatic condition of Sistan region done, sith complete block design with 3 replication. Experiment has been selected as split plot, the main plot with 4 different concentration level such as (200-250-3500 and 350 Kg/ha) and sub plot density with 3 different level such as 111000,83000 and 66000 plan/ha respectively. From stage growth up to harvesting of corn in this reache having Data for each treat. ment, After harvesting Analysis of variance and companion of Average of each treatment has been done by DunKan method. Results has been shown, Measurment of characteristics (yield component) seed yield effected different density level of manure, with increasing of manure weight of one thousand seed yield and also in high density showed high significant differente amoung each other. These are with suitable climatic condition of sistan region if enough water will be available ed using Amount of 350 ks/ha Nitrogen manure and with density 111000 plants/ha we can product suitable seed yield Biological yield

Influences of nitrogen and potassium top dressing on yield and yield ...

African Journals Online (AJOL)

STORAGESEVER

2010-05-03

May 3, 2010 ... (K) top dressing on grain yield and yield components of rice (Oryza sativa cv. Tarrom) and to ... positive reciprocal effect on crops, and was an important approach in ..... dressing fertilization (Figures 2a, b and c), but nitrogen levels of upper fully .... (Brassica napus L.)–rice (Oryza sativa L.) rotation. Plant Soil ...

The Effect of Plant Growth Promoting Rhizobacteria (PGPR and Phosphate Solubilizing Microorganism (PSM on Yield and Yield Components of Wheat (cv. N80 under Different Nitrogen and Phosphorous Fertilizers Levels in Greenhouse Condition

Directory of Open Access Journals (Sweden)

S. H Bahari saravi

2013-04-01

Full Text Available In order to evaluate the effect of plant growth promoting rhizobacteria (PGPR and phosphate solubilizing microorganism (PSM on yield and yield components of wheat a pot experiment was conducted at Sari Agricultural Sciences and Natural Resources University during 2009. Experiment was arranged in factorial based on completely randomized design in three replicates. Treatments were included bio-fertilizer in four levels (non-inoculation control, Phosphate Barvare 2 (Pseudomonas fluorescens+Bacillus subtilis, Supernitroplus (Azotobacter brasilense+Azospirillum lipoferum and Nitroxine (Azospirillum + Pseudomona + Bacillus, three levels of chemical nitrogen fertilizer (0, 75 and 150 kg urea/ha and three levels of phosphorus fertilizer (0, 60 and 120 kg super phosphate triple/ha. Results showed that the studied treatments (biofertilizer, nitrogen and phosphate inorganic fertilizers had significant effect on grain number per spike, 1000 grain weight, grain yield, straw yield, biological yield and harvest index. Interaction effect between biofertilizer and chemical fertilizers was significant in terms of grain yield. The maximum grain yield was resulted from simultaneously applying of Nitroxine and 75 kg ha-1 nitrogen fertilizer. By contrast, the highest straw yield was obtained when 150 kg nitrogen fertilizer was used. Grain yield had the maximum correlation with biological yield (r=0.85**. Grain yield positively and significantly correlated with grain number per spike (r=0.73**, 1000 grain weight (r=0.68**, straw yield (r=0.56** and harvest index (r=0.69**. In conclusion biofertilizer inoculations could reduce application of nitrogen and phosphorus chemical fertilizers and increase plant performance.

The Effect of High Concentrations of Glufosinate Ammonium on the Yield Components of Transgenic Spring Wheat (Triticum aestivum L. Constitutively Expressing the bar Gene

Directory of Open Access Journals (Sweden)

Zoltán Áy

2012-01-01

Full Text Available We present an experiment done on a bar+ wheat line treated with 14 different concentrations of glufosinate ammonium—an effective component of nonselective herbicides—during seed germination in a closed experimental system. Yield components as number of spikes per plant, number of grains per spike, thousand kernel weight, and yield per plant were thoroughly analysed and statistically evaluated after harvesting. We found that a concentration of glufosinate ammonium 5000 times the lethal dose was not enough to inhibit the germination of transgenic plants expressing the bar gene. Extremely high concentrations of glufosinate ammonium caused a bushy phenotype, significantly lower numbers of grains per spike, and thousand kernel weights. Concerning the productivity, we observed that concentrations of glufosinate ammonium 64 times the lethal dose did not lead to yield depression. Our results draw attention to the possibilities implied in the transgenic approaches.

Genetic basis of some yield components in gossypium hirsutum l

International Nuclear Information System (INIS)

Javed, A.; Azhar, F.M.; Khan, I.A.; Rana, S.A.

2014-01-01

A 5 * 5 diallel analysis was conducted to study the inheritance of seed cotton yield, number of bolls and boll weight in Gossypium hirsutum L. using combining ability technique. The analysis of the data revealed that variance due to specific combining ability was significant for all the three traits signifying the importance of non additive gene action. The comparison of the parents showed that NF-801-2-37 was the best general combiner for seed cotton yield, number of bolls and boll weight followed by Acala-63-75. Best hybrid combinations identified were Acala-63-75 * NF-801-2-37 for seed cotton yield and DPL-61 * NF-801-2-37 for number of bolls and boll weight. Higher proportion of dominance variance in all three traits suggested delayed selection or use of heterosis breeding in crop improvement programs. (author)

Ideotype population exploration: growth, photosynthesis, and yield components at different planting densities in winter oilseed rape (Brassica napus L.).

Science.gov (United States)

Ma, Ni; Yuan, Jinzhan; Li, Ming; Li, Jun; Zhang, Liyan; Liu, Lixin; Naeem, Muhammad Shahbaz; Zhang, Chunlei

2014-01-01

Rapeseed is one of the most important edible oil crops in the world and the seed yield has lagged behind the increasing demand driven by population growth. Winter oilseed rape (Brassica napus L.) is widely cultivated with relatively low yield in China, so it is necessary to find the strategies to improve the expression of yield potential. Planting density has great effects on seed yield of crops. Hence, field experiments were conducted in Wuhan in the Yangtze River basin with one conventional variety (Zhongshuang 11, ZS11) and one hybrid variety (Huayouza 9, HYZ9) at five planting densities (27.0×10(4), 37.5×10(4), 48.0×10(4), 58.5×10(4), 69.0×10(4) plants ha(-1)) during 2010-2012 to investigate the yield components. The physiological traits for high-yield and normal-yield populations were measured during 2011-2013. Our results indicated that planting densities of 58.5×10(4) plants ha(-1) in ZS11 and 48.0×10(4) plants ha(-1) in HYZ9 have significantly higher yield compared with the density of 27.0×10(4) plants ha(-1) for both varieties. The ideal silique numbers for ZS11 and HYZ9 were ∼0.9×10(4) (n m(-2)) and ∼1×10(4) (n m(-2)), respectively, and ideal primary branches for ZS11 and HYZ9 were ∼250 (n m(-2)) and ∼300 (n m(-2)), respectively. The highest leaf area index (LAI) and silique wall area index (SAI) was ∼5.0 and 7.0, respectively. Moreover, higher leaf net photosynthetic rate (Pn) and water use efficiency (WUE) were observed in the high-yield populations. A significantly higher level of silique wall photosynthesis and rapid dry matter accumulation were supposed to result in the maximum seed yield. Our results suggest that increasing the planting density within certain range is a feasible approach for higher seed yield in winter rapeseed in China.

Diallel analysis for seed yield and its component traits in Cuphea procumbens

Directory of Open Access Journals (Sweden)

Singh S.P.

2006-01-01

Full Text Available The Cuphea procumbens Orteg. is an important annual plant source of medium chain fatty acids. The present study was conducted to estimate different gene systems involved in the inheritance of important quantitative traits viz. plant height, branches/plant, fruits/plant, seeds/fruit and seed yield/plant in F1 and F2 generations following 6 parents half diallel. Diallel assumptions were fulfilled for all the characters. Wr - Vr graph and component analysis revealed the major influence of over dominance for all the traits except branches/plant in F1. The arrays scattered all along the regression line below limiting parabola in two groups, Dominance and recessive and was confirmed by standardized deviation graph. The ranking on the basis of breeding value (Yr of the parents and per se performance was closely associated (r=0.83**. On the basis of ranking, parents 'NBC-01', 'NBC-25' and 'NBC-30' were found most promising and possessed more dominant alleles for most of the characters. Considering the gene action involved, the breeding plan was discussed.

The Effect of Seed Priming and Transplanting on Morphological Characteristics, Yield and Yield Components of SuperSweet Corn

Directory of Open Access Journals (Sweden)

matin haghighi khah

2017-08-01

Full Text Available Introduction Corn (Zea mays L. is the third most important cereal crop in the world after wheat and rice (Lashkari et al., 2011. Corn production has been extended in to the whole world during the course of the last century due to its compatibility. It has more diversity compare to other cereal. Many corn types are cultivated, including field corn, ornamental corn, popcorn, sweet corn and several different supersweet corns. Sweet corn, considered a vegetable, is a special type of corn with particular characteristics, such as sweet taste, thin pericarp and endosperm with delicate texture, and high nutritional value. It is destined exclusively for human consumption, in fresh form or in processed foods, whereas the straw can be used for silage after harvest (Santos et al., 2014. Sweet corn seeds germinate slowly and exhibit poor seedling vigour. Poor germination in sweet corn has been attributed to low seed vigour and susceptibility to seed and soilborne diseases (Ratin et al., 2006. Seed priming is the one of efficient method to improve germination and emergence. In addition, transplanting provides optimal environmental conditions for seed germination and avoids planting seeds in disease-contaminated soil (Khalid et al., 2012. Materials and methods To investigate the effect of seed priming and transplanting on morphological characteristics, yield and yield components of supersweet corn a series of greenhouse and field experiments were conducted in a factorial based design on a randomized complete block in 2013. This experiment was conducted in the greenhouse to determine the best seed priming treatments. The treatments were hydro priming, Poly ethylene glycol (6000 -0.4 and -0.8 MPa, Sodium Sulphate 0.1 and 0.5%, Zinc Sulphate 1 and 0.5%, Copper Sulphate 0.1 and 0.5% and Control for 36 hours. After that the seeds washed by distillated water and dried back in laboratory conditions. Then treated seeds were sown in trays that contained by cocopeatand

Effect of Limited Drip Irrigation Regime on Yield and Yield Components of Sesame under Mediterranean Conditions

Directory of Open Access Journals (Sweden)

Panayiota PAPASTYLIANOU

2017-05-01

Full Text Available Sesame is one of the most important oilseed crops in the world. Irrigation is of great importance to sesame production due to its positive effect on growth parameters. Although sesame has good drought tolerance compared with many other crops, it is particularly susceptible to drought damage during the seedling, flowering and seed filling stages and this can lead to yield loss. The aim of this study was to determine the response of sesame landraces to different irrigation applications during the 2015 growing season. The experiment was set up as a split plot design with three replicates, four main plots (irrigation treatments, designated as 100%, 75% 50% and 0 of the daily crop evapotranspiration and two sub-plots (sesame landraces, Limnos and Evros. Different characteristics such as plant height, number of seeds per capsule, and number of capsules per plant, seed yield, 1000-seed weight and % capsules without seeds, were recorded. The results indicated that all traits except 1000-seed weight were significantly affected by irrigation regimes. Plant height, shattering losses and number of capsules per plant decreased with increasing water shortage. Seed yield and number of seeds per capsule were less affected by irrigation level and showed higher values in the 50% of the daily crop evapotranspiration treatment. Limnos produced higher seed yield and number of seeds per capsule under all irrigation regimes. Evros showed higher plant height and shattering losses than Limnos. The results of this study suggest that sesame landraces can use water efficiently, are locally adapted and associated with traditional farming systems.

Effect of different fertilizer resources on yield and yield components of grain maize (Zea mays L. affected by tillage managements

Directory of Open Access Journals (Sweden)

Ahmad Ghasemi

2016-03-01

Full Text Available Introduction Due to the development of sustainable agriculture and the reduction of utilizing chemical fertilizers, it is essential to use organic fertilizer. Organic matter is vital to soil fertility and its productivity. To maintain the level of fertility and the strength of soil, organic matter levels should be maintained at an appropriate level. Unfortunately, the level of organic matter in soil is generally less than 1%. One solution to increase the soil’s organic matter content is to use organic fertilizers such as animal manure, green manure, and vermicompost (Nuralvandy, 2011. As a correction factor, green manure can increase water supply and nutrient soil conservation (Tajbakhsh et al., 2005. Materials and methods In order to assess the effects of fertilizer sources (green manure, cow manure, and chemical fertilizer on maize yield and yield components (KSC 704 under tillage management, a field experiment was carried out at Zahak Agricultural and Natural Resource Research Station in two years (from 2013 to 2014. Before corn planting, barley was planted as green manure in the fall of each year. The experiment was conducted as a split plot arranged in a completely randomized block design with three replications. The main plots were tillage and no tillage, whereas the sub plots were: 1-barley green manure (without application of fertilizer, 2-barley green manure with applying 100% chemical fertilizer (NPK to the barley during cultivation, tillering and stemming stages, 3- green manure with 2/3 of chemical fertilizer to the barley and 1/3 to the maize, 4- green manure with 1/3 of chemical fertilizer to the barley and 2/3 to the maize, 5- barley green manure with 50% animal and chemical manures, 6- barley green manure with 40 t ha-1 of animal manure, 7-control (non-fertilizer application. Corn was planted on 15 March each year. Phosphorus, potassium fertilizer, and animal manure were added to the soil as the base fertilizers. At full

Theory of mind correlates with clinical insight but not cognitive insight in patients with schizophrenia.

Science.gov (United States)

Zhang, Qi; Li, Xu; Parker, Giverny J; Hong, Xiao-Hong; Wang, Yi; Lui, Simon S Y; Neumann, David L; Cheung, Eric F C; Shum, David H K; Chan, Raymond C K

2016-03-30

Research on the relationship between insight and social cognition, in particular Theory of Mind (ToM), in schizophrenia has yielded mixed findings to date. Very few studies, however, have assessed both clinical insight and cognitive insight when examining their relationships with ToM in schizophrenia. The current study thus investigated the relationship between clinical insight, cognitive insight, and ToM in a sample of 56 patients with schizophrenia and 30 healthy controls. Twenty-seven patients were classified as low in clinical insight according to their scores on the 'insight' item (G12) of the Positive and Negative Syndrome Scale (PANSS). Moreover, cognitive insight and ToM were assessed with the Beck Cognitive Insight Scale (BCIS) and the Yoni task, respectively. The results indicated that patients with poor clinical insight performed worse on tasks of second-order cognitive and affective ToM, while the ToM performance of patients with high clinical insight was equivalent to that of healthy controls. Furthermore, while clinical insight was correlated with ToM and clinical symptoms, cognitive insight did not correlate with clinical insight, ToM, or clinical symptoms. Clinical insight thus appears to be an important factor related to ToM in schizophrenia. Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.

Population genomic analysis of ancient and modern genomes yields new insights into the genetic ancestry of the Tyrolean Iceman and the genetic structure of Europe.

Directory of Open Access Journals (Sweden)

Martin Sikora

2014-05-01

Full Text Available Genome sequencing of the 5,300-year-old mummy of the Tyrolean Iceman, found in 1991 on a glacier near the border of Italy and Austria, has yielded new insights into his origin and relationship to modern European populations. A key finding of that study was an apparent recent common ancestry with individuals from Sardinia, based largely on the Y chromosome haplogroup and common autosomal SNP variation. Here, we compiled and analyzed genomic datasets from both modern and ancient Europeans, including genome sequence data from over 400 Sardinians and two ancient Thracians from Bulgaria, to investigate this result in greater detail and determine its implications for the genetic structure of Neolithic Europe. Using whole-genome sequencing data, we confirm that the Iceman is, indeed, most closely related to Sardinians. Furthermore, we show that this relationship extends to other individuals from cultural contexts associated with the spread of agriculture during the Neolithic transition, in contrast to individuals from a hunter-gatherer context. We hypothesize that this genetic affinity of ancient samples from different parts of Europe with Sardinians represents a common genetic component that was geographically widespread across Europe during the Neolithic, likely related to migrations and population expansions associated with the spread of agriculture.

Role of nitric oxide in cadmium-induced stress on growth, photosynthetic components and yield of Brassica napus L.

Science.gov (United States)

Jhanji, Shalini; Setia, R C; Kaur, Navjyot; Kaur, Parminder; Setia, Neelam

2012-11-01

Experiments were carried out to study the effect of cadmium (Cd) and exogenous nitric oxide (NO) on growth, photosynthetic attributes, yield components and structural features of Brassica napus L. (cv. GSL 1). Cadmium in the growth medium at different levels (1, 2 and 4 Mm) retarded plant growth viz. shoot (27%) and root (51%) length as compared to control. The accumulation of total dry matter and its partitioning to different plant parts was also reduced by 31% due to Cd toxicity. Photosynthetic parameters viz., leaf area plant(-1) (51%), total Chl (27%), Chl a / Chl b ratio (22%) and Hill reaction activity of chloroplasts (42%) were greatly reduced in Cd-treated plants. Cd treatments adversely affected various yield parameters viz., number of branches (23) and siliquae plant(-1) (246), seed number siliqua(-1) (10.3), 1000-seed weight (2.30g) and seed yield plant(-1) (7.09g). Different Cd treatments also suppressed the differentiation of various tissues like vessels in the root with a maximum inhibition caused by 4mM Cd. Exogenous application of nitric oxide (NO) improved the various morpho-physiological and photosynthetic parameters in control as well as Cd-treated plants.

THE EFFECT OF FERTILIZATION ON YIELD COMPONENTS AND QUALITY PARAMETERS OF SOYBEANS [(GLYCINE MAX (L. MERR.] SEEDS

Directory of Open Access Journals (Sweden)

Milan Macak

2013-09-01

Full Text Available Field experiment was carry out at experimental farm Oponice West Slovakia, 48 28 N, 18 9E in 2004 2007. The aim of the work was to evaluate the influence of nitrogen fertilization treatments on yield and yield component and selected quality parameters proteins, oil, fibre, isoflavones of soybeen seeds variety Korada, in agri environmental condition of western part of Slovakia. The fertilization treatments were as follows I unfertilized treatment; II application of nitrogen fertilizers LAV 27 ammonium nitrate with lime 40 kg ha 1 nitrogen in the vegetative stage V2; III Humix complet in split application of total dose 4 +4 L ha 1 applied in growth stage of V2 and in reproductive growth stage of R1 beginning bloom. Humix complet contain bioactive ingredient and nutrients for plant nutrition with 2.5 of humic acids, 4.0 total N, 0.5 P2O5, 3 K2O, and micronutrients. Result showed the highest variation of pods per plant in dependence of year condition range 17.8-24.7. No significant differences between numbers of seeds were noted 2.13-2.29. The split application of Humic complet significantly influence the higher number of pods per plant 24.8 while keeping the number of seeds per pod 2.13. The yield of seeds was significantly influenced by weather conditions 2.84 t ha 1 4.68 t ha 1 and by fertilization treatments. Supplemental ammonium nitrate with lime treatments II in the vegetative stage of V2 or Humix complet treatment III applied in V2 and R1 stages significantly increased yield of soybean seeds up to 3.91 t ha 1 and 4.27 t ha 1 with comparison to control treatment 3.49 t ha 1. Content of protein, oil and fibre was not significantly differing between fertilization treatments. In spite of significantly higher soybean yield in Humic complet treatment, content of protein 37.67, oil 15.83 and fibre 9.47 was at the same level as lower yielded treatments. Soybean seeds from higher yielded fertilization treatments have significantly less content of

Yield gap of rainfed rice in farmers’ fields in Central Java, Indonesia

NARCIS (Netherlands)

Boling, A.A.; Tuong, T.P.; Keulen, van H.; Bouman, B.A.M.; Suganda, H.; Spiertz, J.H.J.

2010-01-01

Yield constraint analysis for rainfed rice at a research station gives insight into the relative role of occurring yield-limiting factors. However, soil nutrient status and water conditions along toposequences in rainfed farmers’ fields may differ from those at the research station. Therefore, yield

Paths of Influence Among Components of Yield in Sorghum ...

African Journals Online (AJOL)

yard manure (FYM); shallow depth ... fertilizer; deep depth of tillage with ... lYY6 at a spacing of 30 x 100 cm in deep tillage ridges and 40 x 75 cm in shallow ..... grain weight was neither related nor was tant in influencing the yield of sor-.

Direct and indirect selection responses for seed yield and its components in

Directory of Open Access Journals (Sweden)

rasoul dehghan

2017-06-01

Full Text Available Breeding based on selection indices is an effective method for improving complex traits such as yield. To assess the efficiency of different selection method, 83 exotic along with 17 Iranian safflower genotypes were evaluated at the research farm of Isfahan University of Technology using 10×10 simple lattice design with three replications in 2011. In this study, the selection indices of Smith-Hazel and Pesek-Baker were determined based on the number of capitulum per plant, number of seeds per capitulum and 1000-seed weight. Also response to selection and relative selection efficiency were estimated for traits under study and seed yield. The highest estimated selection efficiency for genetic improvement of seed yield was obtained via selection for number of capitulum per plant. Therefore, this trait can be used as an appropriate selection criterion for improvement of seed yield. The results showed that seed yield was highly correlated with each of these indices and the estimated efficiency of indirect selection via these indices was relatively high. Thus, it seems that these selection indices can be effectively used for seed yield improvement. Results of present study showed that the efficiency of Smith-Hazel indices for simultaneous improvement of number of capitulum per plant, number of seeds per capitulum and 1000-seed weight was higher than that of Pesek-Baker index.

interrelationships between grain yield and other physiological traits

African Journals Online (AJOL)

Prof. Adipala Ekwamu

Combined analysis of variance, cluster analysis and genotype-by- ... all phenological and morphological traits, except grain yield and associated yield components. ... egg, and other protein-rich foods (Alghali, 1991). ... systematic modelling approach. ... MD IT98 K -132 – 3 .... traits based on Principal Component axes (PC)1.

The Effect of Chemical, Biological and Organic Nutritional Treatments on Sunflowers Yield and Yield Components under the Influence of Water Deficit Stress

Directory of Open Access Journals (Sweden)

fatemeh soleymani

2016-07-01

Full Text Available Introduction To achieve the higher economic yield of crop plants, supplying enough nutrients to plants is very important. Moreover, nutrient uptakes by plants is influenced by the soil water contents. However, nowadays chemical fertilizer application is important agronomic factor that has significant effects on growth and quantity and quality of final yield, but traditional nutrient management and excessive use of chemical fertilizers may cause the environmental problems such as contamination of soil and water resources, low quality of agricultural products and reduction of soil fertility. These factors have drawn attention to health and ecological sustainable farming systems (Sharma, 2002. In this context, usage of organic and biological products for plant nutrition is considered as one of the solutions to achieve the goals of sustainable agriculture. Materials and methods To evaluate the effect of various feeding systems on yield and yield components of sunflower (Helianthus annuus L. under the influence of water deficit stress, a split-plot experiment based on randomized complete block design with three replications, was carried out in the Agricultural Faculty of Bu-Ali Sina University during the growing season of 2013-2014. Main plots consisted of two irrigation levels: optimum irrigation and deficit irrigation stress (irrigation after 60 and 120 mm evaporation from evaporation pan, class A, respectively and sub-plots included of nine nutrition systems: 1- no bio or chemical fertilizer application, 2- 100% of the recommended chemical fertilizer , 3- vermicompost, 4- phospho nitro kara, 5- vermicompost+ phospho nitro kara, 6- vermicompost+ ½ chemical fertilizer, 7- phospho nitro kara+ ½ chemical fertilizer, 8- vermicompost+ phospho nitro kara+ ½ chemical fertilizer, 9- ½ proposed chemical fertilizer. Phospho-nitro-kara which contains phosphate solubilizing and nitrogen fixing bacteria (Bacillus coagulans, azotobactr chroocuccum and

Evaluation of Maturity Characteristics and of Yield Components of ...

African Journals Online (AJOL)

podjilling period. Yield was genetically and negatively corrected with days to first flower, ... production in the tropics is the pattern of climate in the ... been a major concern in many crops. In ... grain.yieldsare low ranging between 200 and 670 ... performance and stability at two loca- ... The analysis of variance was conducted.

Amplitude Models for Discrimination and Yield Estimation

Energy Technology Data Exchange (ETDEWEB)

Phillips, William Scott [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

2016-09-01

This seminar presentation describes amplitude models and yield estimations that look at the data in order to inform legislation. The following points were brought forth in the summary: global models that will predict three-component amplitudes (R-T-Z) were produced; Q models match regional geology; corrected source spectra can be used for discrimination and yield estimation; three-component data increase coverage and reduce scatter in source spectral estimates; three-component efforts must include distance-dependent effects; a community effort on instrument calibration is needed.

Effects of varying forage particle size and fermentable carbohydrates on feed sorting, ruminal fermentation, and milk and component yields of dairy cows.

Science.gov (United States)

Maulfair, D D; Heinrichs, A J

2013-05-01

Ration sorting is thought to affect ruminal fermentation in such a manner that milk yield milk and components are often decreased. However, the influence of ruminally degradable starch on ration sorting has not been studied. Therefore, the objective of this experiment was to evaluate the interactions between forage particle size (FPS) and ruminally fermentable carbohydrates (RFC) for dry matter intake (DMI), ration sorting, ruminal fermentation, chewing activity, and milk yield and components. In this study, 12 (8 ruminally cannulated) multiparous, lactating Holstein cows were fed a total mixed ration that varied in FPS and RFC. Two lengths of corn silage were used to alter FPS and 2 grind sizes of corn grain were used to alter RFC. It was determined that increasing RFC increased ruminating time and did not affect eating time, whereas increasing FPS increased eating time and did not affect ruminating time. Ruminal fermentation did not differ by altering either FPS or RFC. However, increasing FPS tended to increase mean and maximum ruminal pH and increasing RFC tended to decrease minimum ruminal pH. Particle size distribution became more diverse and neutral detergent fiber content of refusals increased over time, whereas starch content decreased, indicating that cows were sorting against physically effective neutral detergent fiber and for RFC. Selection indices determined that virtually no interactions occurred between FPS and RFC and that despite significant sorting throughout the day, by 24h after feeding cows had consumed a ration very similar to what was offered. This theory was reinforced by particle fraction intakes that very closely resembled the proportions of particle fractions in the offered total mixed ration. An interaction between FPS and RFC was observed for DMI, as DMI decreased with increasing FPS when the diet included low RFC and did not change when the diet included high RFC. Dry matter intake increased with RFC for long diets and did not change

Optimization of ethanol production from garcinia cambogia residues and the effects of its medicinal component on production yield

International Nuclear Information System (INIS)

Ma, H.; Zhang, F.

2017-01-01

Garcinia cambogia, a Chinese herbal medicine, was popular due to its effect for weight loss. The main medical component inside was determined to be hydroxycitric acid (HCA). To realize the resource technology of garcinia cambogia residue, Optimum ethanol production from residues was investigated, and the effects of remaining HCA on the ethanol yield were investigated. A Plackett-Burman experimental design was used to screen the significance of several influencing factors, and cellulase, yeast extract, and KH2PO4 were observed to exert important effects. The optimum ethanol fermentation conditions were determined through an orthogonal design to include a cellulase concentration of 100 U/g, a yeast extract concentration of 15 g/L, and a KH2PO4 concentration of 1.0 g/L. The ethanol concentration obtained under optimal conditions was 4.0 g/L. The remained HCA in the residues showed minimal influences on ethanol fermentation and could even increase ethanol yield at low concentrations. (author)

Pistil Smut Infection Increases Ovary Production, Seed Yield Components, and Pseudosexual Reproductive Allocation in Buffalograss

Directory of Open Access Journals (Sweden)

Ambika Chandra

2014-12-01

Full Text Available Sex expression of dioecious buffalograss [Bouteloua dactyloides Columbus (syn. Buchloë dactyloides (Nutt. Engelm.] is known to be environmentally stable with approximate 1:1, male to female, sex ratios. Here we show that infection by the pistil smut fungus [Salmacisia buchloëana Huff & Chandra (syn. Tilletia buchloëana Kellerman and Swingle] shifts sex ratios of buffalograss to be nearly 100% phenotypically hermaphroditic. In addition, pistil smut infection decreased vegetative reproductive allocation, increased most seed yield components, and increased pseudosexual reproductive allocation in both sex forms compared to uninfected clones. In female sex forms, pistil smut infection resulted in a 26 fold increase in ovary production and a 35 fold increase in potential harvest index. In male sex forms, pistil smut infection resulted in 2.37 fold increase in floret number and over 95% of these florets contained a well-developed pistil. Although all ovaries of infected plants are filled with fungal teliospores and hence reproductively sterile, an average male-female pair of infected plants exhibited an 87 fold increase in potential harvest index compared to their uninfected clones. Acquiring an ability to mimic the effects of pistil smut infection would enhance our understanding of the flowering process in grasses and our efforts to increase seed yield of buffalograss and perhaps other grasses.

The Effect of Planting Pattern and Density on Yield and Yield Components of Sesame (Sesamum indicum L.

Directory of Open Access Journals (Sweden)

A Koocheki

2017-06-01

Full Text Available Introduction Crop density enhancement is a method to increase yield per unit area. The spatial distribution of plants is related to radiation absorption. Therefore, it could play an effective role in photosynthesis and yield, since Crop Growth Rate (CGR is a function of used radiation energy in photosynthesis. Totally, increasing radiation absorption efficiency and yield need sufficient leaf area and suitable distribution of leaves in canopy. Ahmad et al., (2002 planted sesame with different inter row- spacing (30, 45 and 60 cm, they reported that the maximum plant height and economic yield were obtained from inter row- spacing of 45 cm. Rahnama and Bakhshandeh (2006 planted sesame with different inter row- spacing (37.5, 50 and 60 cm and the results showed that the number of capsules per plant, seed weight as well as seed oil per plant, increased with increasing inter row- spacing. Karasan et al., (2007 reported that decreasing inter row- spacing resulted in seed yield enhancement and reduction in number of capsules per plant. Material and Methods An experiment using split-plot based on randomized complete blocks design was performed. The experiment was carried with three replications in two years (2012 and 2013 at the agricultural research station of Ferdowsi University of Mashhad. For this purpose, the main plot was the density per square meter with three levels (30, 40 and 50 plants per square meter and the sub main plot was planting pattern (rectangle, square and rhombic. The size of each plot was 2×3 meters. The distance between plots and blocks were 0.5 and 1 meter, respectively. Intra row- spacing for rectangle planting pattern for densities of 30, 40 and 50 plants per square meter was 6, 5 and 4 cm, respectively. In square and rhombic planting patterns, 2 lines was planted in each row and inter row- spacing for densities of 30, 40 and 50 plants per square meter were 18, 16 and 14 cm. economic yield measured at the end of growth season

Genotype x environment interaction and stability analysis for yield ...

African Journals Online (AJOL)

etc

2015-05-06

. Combined analysis of variance (ANOVA) for yield and yield components revealed highly significant .... yield stability among varieties, multi-location trials with ... Mean grain yield (kg/ha) of 17 Kabuli-type chickpea genotypes ...

CRISPR-Cas adaptation: insights into the mechanism of action.

Science.gov (United States)

Amitai, Gil; Sorek, Rotem

2016-02-01

Since the first demonstration that CRISPR-Cas systems provide bacteria and archaea with adaptive immunity against phages and plasmids, numerous studies have yielded key insights into the molecular mechanisms governing how these systems attack and degrade foreign DNA. However, the molecular mechanisms underlying the adaptation stage, in which new immunological memory is formed, have until recently represented a major unresolved question. In this Progress article, we discuss recent discoveries that have shown both how foreign DNA is identified by the CRISPR-Cas adaptation machinery and the molecular basis for its integration into the chromosome to form an immunological memory. Furthermore, we describe the roles of each of the specific CRISPR-Cas components that are involved in memory formation, and consider current models for their evolutionary origin.

Material component to non-linear relation between sediment yield and drainage network development: an flume experimental study

Institute of Scientific and Technical Information of China (English)

无

2001-01-01

This paper examines the experimental study on influence ofmaterial component to non linear relation between sediment yield and drainage network development completed in the Lab. The area of flume drainage system is 81.2 m2, the longitudinal gradient and cross section slope are from 0.0348 to 0.0775 and from 0.0115 to 0.038, respectively. Different model materials with a medium diameter of 0.021 mm, 0.076 mm and 0.066 mm cover three experiments each. An artificial rainfall equipment is a sprinkler-system composed of 7 downward nozzles, distributed by hexagon type and a given rainfall intensity is 35.56 mm/hr.cm2. Three experiments are designed by process-response principle at the beginning the ψ shaped small network is dug in the flume. Running time spans are 720 m, 1440 minutes and 540 minutes for Runs Ⅰ, Ⅳ and Ⅵ, respectively. Three experiments show that the sediment yield processes are characterized by delaying with a vibration. During network development the energy of a drainage system is dissipated by two ways, of which one is increasing the number of channels (rill and gully), and the other one is enlarging the channel length. The fractal dimension of a drainage network is exactly an index of energy dissipation of a drainage morphological system. Change of this index with time is an unsymmetrical concave curve. Comparison of three experiments explains that the vibration and the delaying ratio of sediment yield processes increase with material coarsening, while the number of channel decreases. The length of channel enlarges with material fining. There exists non-linear relationship between fractal dimension and sediment yield with an unsymmetrical hyperbolic curve. The bsolute value of delaying ratio of the curve reduces with time unning and material fining. It is characterized by substitution of situation to time.

Root-yield performance of pre-release sweet potato genotypes in ...

African Journals Online (AJOL)

SARAH

2013-05-29

May 29, 2013 ... consideration all yield components which affect the total root yield. Such a focused approach with well- defined selection objectives ensures positive progress early in the breeding program. Interrelationships among yield components have been investigated by Grüneberg et al. (2005) in. Peru and Çalişkan ...

Numerical Experiments Providing New Insights into Plasma Focus Fusion Devices

Directory of Open Access Journals (Sweden)

Sing Lee

2010-04-01

Full Text Available Recent extensive and systematic numerical experiments have uncovered new insights into plasma focus fusion devices including the following: (1 a plasma current limitation effect, as device static inductance is reduced towards very small values; (2 scaling laws of neutron yield and soft x-ray yield as functions of storage energies and currents; (3 a global scaling law for neutron yield as a function of storage energy combining experimental and numerical data showing that scaling deterioration has probably been interpreted as neutron ‘saturation’; and (4 a fundamental cause of neutron ‘saturation’. The ground-breaking insights thus gained may completely change the directions of plasma focus fusion research.

Effect of Drought Stress at Different Growth Stages on Yield and Yield Components of Six Rice (Oryza sativa L. Genotypes

Directory of Open Access Journals (Sweden)

Sharifunnessa Moonmoon

2017-12-01

Full Text Available Drought stress affects plant growth and development and ultimately, reduced grain yield of rice. But stress at different growth stages may respond differently which is still unclear. Therefore, a pot experiment was carried out with six rice genotypes to determine the critical growth stage where drought stress effect on yield reduction and to find stress tolerance mechanism in rice genotypes. Drought stress (control i.e. no stress and 40% field capacity, FC was imposed on Binadhan-13, Kalizira, BRRI dhan34, Ukunimodhu, RM-100-16 and NERICA mutant rice genotypes at maximum tillering, panicle initiation and grain filling stages and discontinued when the specific stage was over. The experiment was laid out in a complete randomized design with three replications. Drought stress affected number of effective tiller hill-1, number of spikelets panicle-1, filled grains hill-1, 1000-grain weight and grain yield. Binadhan-13 produced the highest grain yield and the lowest sterility under drought stress at grain filling stage. Percentage of spikelet sterility increased under drought stress (40% FC especially at the panicle initiation stage resulting low grain yield. Among the tested genotypes Binadhan-13 performed well by reducing spikelet sterility under drought stress condition. For 1000-grain weight and grain yield, grain filling stage was found more crucial. From the current research, drought tolerance mechanism was found in genotypes Binadhan-13 and NERICA mutant. [Fundam Appl Agric 2017; 2(3.000: 285-289

Effects of Super-Absorbent Polymer Application on Yield and Yield Components of Rapeseed (Brassica napus L.

Directory of Open Access Journals (Sweden)

Fariborz SHEKARI

2015-09-01

Full Text Available Limitation of water resources and its great impact on agricultural and natural resources play a crucial role in the efficiency of water use. Applying super absorbent polymer to the soil may be one of the methods to minimize the stress of weather dryness in arid and semi-arid regions. In order to evaluate the effects of hydrophilic polymer application on yield and water use efficiency of rapeseed plants, an experiment was conducted under field condition in 2012 at the Research Farm of the Faculty of Agriculture, University of Maragheh. Treatments’ factors were: (i 3 super absorbent polymers (SAP (Taravat A200 levels of 0 (without application, 75 and 150 kg ha-1 A200 application, (ii three irrigation levels of 80, 120 and 180 mm evaporation from class A basin in main plots, (iii two cultivars ʻHyola 401ʼ and ʻRVSʼ in sub plots as factorial split plot combination based on completely randomized block design with three replications. The results showed that in all of the measured traits within the experiment there were significant differences between SAP levels. Furthermore, increasing irrigation interval led to an increase in a thousand seeds’ weight, but decreased seed yield. Increasing water stress raised seed oil percent and infertile silique and subsequently resulted in reduced oil yield. ʻHyola 401ʼ was more susceptible to embryo abortion compared with ʻRVSʼ. As a conclusion of the research, SAP (A200 application in quantities smaller than 75 kg ha-1 may be recommended for rapeseed production under field condition.

Evolution of Intercropping of three Sesame Cultivars (Sabzevar, Kashmar, Kalat on Seed Yield and Yield Components Indices

Directory of Open Access Journals (Sweden)

H Zarghani

2013-10-01

Full Text Available In order to study the effect of inter cropping (Blend of three sesame (Sesamum indicum L. cultivars (Sabzevar, Kashmar, Kalat an experiment was conducted as a factorial based on Complete Randomized Block Desing with 3 replications at Research Farm Ferdowsi University in 2009. The experimental treatments were obtained: sole cultivation of Sabzevar, Kalat, Kashmar, and their mixed crops (1. Sabzevar with Kashmar, 2. Sabzevar with Kalat, 3. Kalat with Kashmar. The results showed that highest and lowest studied traits (including: biological and seed yield, the number of capsules on main stem and branches, number of seeds per capsule and seed weight obtained in Sabzevar-Kashmar and sole cultivation of Kalat respectively. Generally Sabzevar in mix with other cultivars increased total yield seed, and Kalat and Kashmar Cultivars in mixed with Sabzevar cultivar had the highest positive effectives. And mix of Kashmar and Kalat cultiavars had the lowest indicator amount. Also mix of Sabzevar with Kashmar cultivars and mix of Kalat with Kashmar cultivars had the highest (1/14 and lowest (0/93 Land Equivalent Ratio (LER. Based on the results of this experiment mix of Sabzevar with Kashmar is best treatment in order to achieving high seed yield of sesame in Mashhad area.

Grain yield and agronomic characteristics of Romanian bread wheat ...

African Journals Online (AJOL)

STORAGESEVER

2008-05-16

May 16, 2008 ... Wheat is adapted to diverse environments, between the ... international collaborative studies many new varieties ... Stability of grain yield and quality characteristics over locations ... grain yield capacity and yield components of twelve .... Analysis of variance for grain yield and yield-related traits over two ...

Optimization of components in high-yield synthesis of block copolymer-mediated gold nanoparticles

International Nuclear Information System (INIS)

Ray, Debes; Aswal, Vinod Kumar

2012-01-01

The optimization to achieve stable and high-yield gold nanoparticles in block copolymer-mediated synthesis has been examined. Gold nanoparticles are synthesized using block copolymer P85 in gold salt HAuCl 4 ·3H 2 O solution. This method usually has a very limited yield which does not simply increase with the increase in the gold salt concentration. We show that the yield can be enhanced by increasing the block copolymer concentration but is limited to the factor by which the concentration is increased. On the other hand, the presence of an additional reductant (trisodium citrate) in 1:1 molar ratio with gold salt enhances the yield by manyfold. In this case (with additional reductant), the stable and high-yield nanoparticles having size about 14 nm can be synthesized at very low block copolymer concentrations. These nanoparticles thus can be efficiently used for their application such as for adsorption of proteins.

Effects of Different Corm Densities and Bed Types on Flower Yield Components of Saffron (Crocus sativus L.

Directory of Open Access Journals (Sweden)

A. Mollafilabi

2017-10-01

Full Text Available Introduction Saffron is among the most precious agricultural and medicinal plants of the world and has a specific placement in Iran exports. In Iran total cultivation area was 93000 ha in 2017 that from which about 96% devoted to two main provinces of saffron production including Khorasan-Razavi and South Khorasan with total production of 351 ton saffron. Saffron has unique characters including low water requirement, saffron irrigation in times that other crops do not need, farm utilization for some years, ease of transportation, lack of need to special machinery and complex technology, high capacity to use labor in time of picking flowers, occupation and in the end prevention from immigration and exchange income that make this crop becomes superior in those regions that lack of industrial perspectives and having water limitations. Organic fertilizers have effective role in saffron production including physical improvement of saffron soil, temperature relief, penetration improvement, porosity increase, and soil reducdtion in hardiness, and cause to saffron flowering. Several factors like climate, diseases, irrigation, storage, planting date, chemical and biological fertilizers and animal manure are very effective in saffron quantity and quality. Saffron yield depends on several factors like soil, crop density, planting method, corm size, geographical location, climatic factors like temperature fluctuations specially in time of flowering, rate of rainfall, cultural management and utilization period. The aim of this study was to determine possible effects of corm density and bed type on flower yield components and stigma yield of saffron. Materials and methods In order to evaluate effects of corm density and bed type on reproductive characters, yield components of flower and saffron stigma an experiment was conducted in the form of factorial as RCBD with three replicates at the research farm of Khorasan Science and Technology Part (KSTP during

Effects of Nutrient Antagonism and Synergism on Yield and Fertilizer Use Efficiency

NARCIS (Netherlands)

Rietra, René P.J.J.; Heinen, Marius; Dimkpa, Chistian O.; Bindraban, Prem S.

2017-01-01

Interaction among plant nutrients can yield antagonistic or synergistic outcomes that influence nutrient use efficiency. To provide insight on this phenomenon, peer-reviewed articles were selected that quantified the interaction effects of nutrients on crop yield levels. In total 94 articles were

Effect of different planting patterns on yield and it's components of maize

International Nuclear Information System (INIS)

Ahmad, M.; Chudhry, M.H.

2008-01-01

This study was conducted at Maize and Millets Research Institute, Yusafwala, district Sahiwal during spring and kharif 2001, to find out the best planting pattern for obtaining maximum grain yield of maize variety Sahiwal-2002. For the purpose five planting patterns Were studied in an experimental laid out in randomized complete block design with four replications having plot size of 5m x 6m, Maximum grain yield (5236 kg, ha-1) was obtained with P1 (Flat sowing with earthing up) that was statistically at per with ridge sowing giving 4343 kg, ha-1 grain yield in spring season, Similarly maximum grain yield of 6287 kg, ha-1 was achieved with the same planting pattern in kharif -2001 followed by P2 (Ridge sowing with single row), which gave 5270 kg, ha-1 grain yield. Minimum lodging percentage was observed P1 (Flat sowing with earthing up) in both the seasons i.e. 14.36% and 7.27 % and maximum lodging was recorded in P5 (Bed sowing with two rows 75 cm apart), i.e. 88.56% and 25.85 % during spring and kharif seasons 2001 respectively. Keeping in view the results of both the season it is suggested that both the planting patterns (Flat sowing with earthing up and Ridge sowing with single row) are equally good, because ridge sowing cannot be ignored due 10 less seed requirements, no need of intercultural practices and less delta of water per irrigation is needed. (author)

The Effect of Mycorrhizal Fungi and Humic Acid on Yield and Yield Components of Sunflower

Directory of Open Access Journals (Sweden)

Hamideh Veysi

2017-08-01

Full Text Available Introduction Cultivated sunflower is one of the largest oilseed crops in the world. Sunflower seed is the third largest source of vegetable oil worldwide, following soybean and canola. Nitrogen is one of the most important elements for crops to achieve optimum yields and quality. Phosphorus (P, next to nitrogen, is often the most limiting nutrient for crop and forage production. Phosphorus availability is controlled by three primary factors: soil pH, amount of organic matter and plant species (Reddy et al., 2003. Arbuscular mycorrhizal fungi are one of the most important microorganisms in majority of the undamaged soils so that about 70% of the soil microbial biomass is formed by the mycelium of these fungi. Mycorrhizal association promotes plant absorption of scarce or immobile minerals, especially phosphorus, resulting in enhanced plant growth. Humic acids are dark brown to black, and are soluble in waterunder neutral and alkaline conditions. They are complex aromatic macromolecules with amino acid, amino sugar, peptide and aliphatic compounds linked to the aromatic groups. Humic acid contains nitrogen, phosphorous, calcium, magnesium, sulphur, copper and zinc (Subramanian et al., 2009. Materials and methods Experiment was conducted as split plot factorial based on randomized block design with three replications in 2011-2012. The main plots consisted of nitrogen and phosphorus application levels (zero percent or no chemical fertilizer application, 50% equivalent to 37.5 kg.ha-1 urea + 25 kg.ha-1 super phosphate triple and 100% equivalent to 75 kg.ha-1 urea + 25 kg.ha-1 super phosphate triple. Two species of mycorrhizal include (G. mosseae and (G. interaradices with three levels of humic acid (0, 8 and 16 kg.ha-1 were placed in subplots. The measured traits were: plant height, seed number per head, head diameter, seed oil content, thousand seed weight and seed yield. The data were analyzed using the Mstat-C statistical software. Mean comparison

Effect of seed rate on growth, yield components and yield of mash bean grown under irrigated conditions of arid uplands of Balochistan, Pakistan

International Nuclear Information System (INIS)

Aachakzai, A.K.K.; Taran, S.A.

2011-01-01

A field experiment was carried out to investigate the effects of six different seed rates viz., 15, 17.5, 20, 22.5, 25 and 27.5 kg ha/sup -1/ on the growth, yield and yield attributes of mash bean Vigna mungo (L.) Hepper). This study was conducted for two consecutive years at the Agriculture Research Institute (ARI) under the existing semi-arid climatic, edaphic and water conditions of Quetta, Balochistan. Results revealed that plant population, pods plant/sup -1/, grain yield plant/sup -1/ and grain yield ha/sup -1/ were significantly (p<0.05 influenced by varying seed rates. However, other mentioned growth and yield attributes did not respond significantly. Statistically and numerically a maximum yield plant/sup -1/ (20.98 g) and yield ha/sup -1/ (3120 kg) were obtained in applied seed at the rate of 20 kg ha/sup -1/. Whereas, the same was obtained for plant population and plant height in applied seed rate of 25 kg ha/sup -1/. However, maximum number of branches plant/sup -1/ (4.22) was received for applied seeds at the rate of 15 kg ha/sup -1/. Therefore, seed at the rate of 20 kg ha/sup -1/ seems optimum which could be due to the most desirable population or planting density in the existing environmental conditions of Quetta. Results further revealed that only plant population plot/sup -1/ (r=0.481), and yield plant/sup -1/ (r=0.569) were significantly and positively correlated with grain yield ha/sup -1/, while all other remaining growth and yield attributes exhibited insignificant association with grain yield ha/sup -1/. Hence these two parameters i.e., planting density and grain yield plant/sup -1/ should be given more consideration while deciding about selection criteria for mash bean under irrigated conditions of arid uplands of Balochistan. (author)

Linear and spatial correlation of the yield components and soybean yieldCorrelação linear e espacial dos componentes de produção e produtividade da soja

Directory of Open Access Journals (Sweden)

Morel de Passos e Carvalho

2012-05-01

Full Text Available The soybean is the crop most cultivated in Brazil, with great socioeconomic importance. In the agriculture year 2008/09 in Selvíria County, Mato Grosso do Sul State, in the Brazilian Savannah, was analyzed the production components and the soybean yield cultivated in a Typic Acrustox on no-tillage. The main purpose objective was select among the production components number of pods per plant, number of grains per pod, number of grains per plant, mass of a thousand grains, mass of grains per plant and population of plants, which of the best linear and spatial correlation aiming explain the soybean yield variability. The irregular geostatistical grid was installed to collect of data, with 120 sampling points, in an area of 8.34 ha. The values of spatial dependence range to be utilized should be among 38.1 and 114.7 meters. The model of the adjusted semivariograma was predominantly the spherical. Of the lineal and spatial point of view, the number of pods per plant and the mass of grains per plant they were correlated in a direct way with the soybean yield, demonstrating be the best components to esteem her. A soja é a cultura de grãos mais cultivada no Brasil, com enorme importância socioeconômica. No ano agrícola de 2008/09, no município de Selvíria (MS, no Cerrado Brasileiro, foram analisados os componentes de produção e a produtividade da soja cultivada em Latossolo Vermelho distroférrico em sistema plantio direto. O objetivo foi selecionar entre os componentes de produção número de vagens por planta, número de grãos por vagem, número de grãos por planta, massa de mil grãos, massa de grãos por planta e população de plantas, aquele com a melhor correlação, linear e espacial, visando explicar a variabilidade da produtividade da soja. Foi instalada a malha geoestatística irregular, para a coleta de dados, com 120 pontos amostrais, numa área de 8,34 ha. Os valores dos alcances da dependência espacial a serem empregados

Phenotypic Correlation Between Yield and Yield components of Read wheat (Triticum Aestivum L) in Drought Simulated Conditions in Kenya

International Nuclear Information System (INIS)

Kimurto, P.K.

2002-01-01

Establishing the presence and magnitude of x watering regimes interaction and stability of yield under drought simulated conditions would allow plant breeders select the drought tolerant wheat genotypes based on their performance at different rainfall patterns in different locations, not on overall mean yield. Development of drought tolerant wheat varieties in Kenya in an easier, cheaper and more efficient way is required most of it's land area is marginal. Four moisture stress regimes which simulated terminal, early, mid and late drought were created under rain shelter by supplying 70, 82, 94, 106 mm of moisture up to seedling stage, tillering, anthesis and grain filling, respectively. control had 118 mm of moisture applied at all stages. Four test genotypes R748, R830, R831 and R833 were tested together with one check variety, Duma. Yields for each genotype in two seasons were analysed using ANOVA and genotype x watering regimes assessed. Yield stability was also analysed using regression analysis. The result showed that genotype x watering regimes interaction was highly significant, suggesting that genotypes responded differently to increases water levels in each season. This indicated that selecting of drought tolerant genotypes for marginal areas under rain shelter should be based on those rainfall regimes. Yield stability across watering regimes varied among genotypes with Duma and R830 being the most stable cultivars, indicating that they only do well in low water levels. Genotypes R748 and R831 were the most unstable among all the test cultivars. R748 was the most responsive to increasing levels, indicating that it can be grown in low and high rainfall areas. The study showed that selection of stable drought tolerant cultivars using mobile rain shelters is possible

Robust bearing estimation for 3-component stations

International Nuclear Information System (INIS)

CLAASSEN, JOHN P.

2000-01-01

A robust bearing estimation process for 3-component stations has been developed and explored. The method, called SEEC for Search, Estimate, Evaluate and Correct, intelligently exploits the inherent information in the arrival at every step of the process to achieve near-optimal results. In particular the approach uses a consistent framework to define the optimal time-frequency windows on which to make estimates, to make the bearing estimates themselves, to construct metrics helpful in choosing the better estimates or admitting that the bearing is immeasurable, and finally to apply bias corrections when calibration information is available to yield a single final estimate. The algorithm was applied to a small but challenging set of events in a seismically active region. It demonstrated remarkable utility by providing better estimates and insights than previously available. Various monitoring implications are noted from these findings

Effect of complementary irrigation on yield components and alternate bearing of a traditional olive orchard in semi-arid conditions

Directory of Open Access Journals (Sweden)

Enrico M. Lodolini

2016-06-01

Full Text Available Traditional olive orchards are usually not irrigated in the Mediterranean basin, but at those latitudes, the yearly rainfall is frequently insufficient to support equilibrated vegetative growth and high fruit and oil production. This three-year field study investigated the effect of complementary irrigation on olive tree vegetative growth, fruit and oil yield during a biennial alternate bearing cycle in a traditional grove under semi-arid conditions. Adult olive trees (Olea europaea L. cv. Nabali Baladi were subjected to complementary irrigation in 2011 and 2012 ('on' and 'off' years, respectively with 6, 10, 15 or 20 m3 of water per tree per season, which corresponded to 14.2%, 23.8%, 35.7% and 47.6% of the whole seasonal evapotranspiration (42 m3 of water per year, respectively. Rain-fed trees were used as control. In 2013, no complementary irrigation was supplied, and any residual effects on the yield components were determined. Results showed that none of the irrigation regimes affected vegetative growth, or olive fruit size (mesocarp and endocarp, as fresh and dry weights. The fruit and oil yield per tree increased compared to the rain-fed conditions only when the threshold of 15 m3 was exceeded, thus inducing a higher crop load compared to the rain-fed control during the 'off' and even further during the 'on' year. No residual effects were registered in 2013. The study showed that complementary irrigation of at least 35% of the seasonal water requirement can produce remarkable positive effects on fruit yield especially during 'on' bearing years.

Sewage sludge used as organic manure in Moroccan sunflower culture: Effects on certain soil properties, growth and yield components.

Science.gov (United States)

Mohamed, Bourioug; Mounia, Krouna; Aziz, Abouabdillah; Ahmed, Harraq; Rachid, Bouabid; Lotfi, Aleya

2018-06-15

The wastewater treatment and sludge production sectors in Morocco are recent. Considered as waste, no management strategy for sewage sludge (SS) has been implemented. Thus, its disposal definitely represents a major environmental problem since sludge is either incinerated, used as landfill or simply deposited near wastewater treatment plants. The objective of this study was to determine the effects of dehydrated SS on certain soil properties (pH, electrical conductivity (EC), Mineral nitrogen, available phosphate P 2 O 5 , and soluble potassium K 2 O), and also on growth and yield components of the sunflower (Helianthus annuus L.). An experiment was conducted using six treatment rates (0; 0 + NPK; 15; 30; 60 and 120 t ha -1 ). The results showed that soil pH was significantly affected by SS, becoming less alkaline compared to the control, while electrical conductivity increased significantly when the applied doses were above 30 t ha -1 . Also, a significant enrichment in mineral N and available phosphorus was detected in amended soil. However, no differences were found between pots having received the mineral fertilization and the SS at 15 t ha -1 . Stem height growth of the sunflower seedlings receiving SS increased significantly compared to the two controls. For both the aerial and root parts, significant increases in dry biomass accumulation were observed compared to the unamended plants. Net CO 2 assimilation (A n ) increased, while stomatal conductance (g sw ) and transpiration rates (T r ) decreased with increasing SS rates. SS application at 15 t ha -1 presented similar values of the yield components compared to plants fertilized chemically. However, grain yield (in quintals ha -1 ) was noted to be 2.4, 5 and 8 times higher in treatments receiving SS respectively at the rate of 30, 60 and 120 t ha -1 . Copyright © 2018 Elsevier B.V. All rights reserved.

Growth and Yield Components of Tomato as Influenced by Nitrogen ...

African Journals Online (AJOL)

yield of tomato, and later application in the growing stages favours fruit development, thus nitrogen has a dramatic effect on tomato growth and development ..... CRBD design in factorial experiment using SAS analytical Software. ..... with relatively fertile soil experimental conditions there is no existence of joint factor.

Application of Spent Mushroom Compost and Mycorrhiza on Yield and Yield Components of Garlic (Allium sativum L. in the Low Input Cropping System

Directory of Open Access Journals (Sweden)

P rezvani moghaddam

2017-10-01

, manganese and copper and water. In return, the plant provides carbohydrates for the fungi. Materials and methods In order to study the effect of mushroom compost and mycorrhiza on yield of garlic (Allium sativum L., a split plot experiment based on RCBD design with three replications was conducted in 2010-11 growing season in research farm of Ferdowsi University of Mashhad, Iran. Mycorrhiza (Glomus mosseae (use and non-use and spent mushroom compost levels (SMC (0, 20, 40, 60, 80, 100 t ha-1 were considered as the main and sub factors. In order to determine the physic-chemical properties of soil, sampling was done at a depth of 0 to 30 cm. Distance on and between rows was considered 10 and 20 cm, respectively. In order to weeds control, manual weeding was done three times. At the end of the growing season, economic yield, biological yield, plant height, shoot dry weight, bulb diameter, bulblet weight per plant, bulblet volume per plant and bulblet number per plant were measured. Analysis of variance was done with SAS Ver 9.1 software. Result and discussion The results showed that the effect of different levels of mushroom compost was significant on the most studied traits, but mycorrhiza had no significant effect on yield and yield components of garlic. Based on the results, highest diameter and length of the bulb and bulblets were observed in application of 100 t ha-1 SMC. The highest economic yield (12760 kg ha-1 was observed in application of 100 t ha-1 SMC, so that the application of SMC increased economic yield by 48 percent compared to control. The highest dry matter production and harvest index also were observed in application of 100 t ha-1 SMC. Organic and biological fertilizers are among the most significant resources for development of agricultural soil quality and increase in the yield of different medicinal plants. It has been reported that this ecological inputs provide favorable conditions for plant growth and development through improvement of physical

Giant intracranial aneurysm embolization with a yield stress fluid material: insights from CFD analysis.

Science.gov (United States)

Wang, Weixiong; Graziano, Francesca; Russo, Vittorio; Ulm, Arthur J; De Kee, Daniel; Khismatullin, Damir B

2013-01-01

The endovascular treatment of intracranial aneurysms remains a challenge, especially when the aneurysm is large in size and has irregular, non-spherical geometry. In this paper, we use computational fluid dynamics to simulate blood flow in a vertebro-basilar junction giant aneurysm for the following three cases: (1) an empty aneurysm, (2) an aneurysm filled with platinum coils, and (3) an aneurysm filled with a yield stress fluid material. In the computational model, blood and the coil-filled region are treated as a non-Newtonian fluid and an isotropic porous medium, respectively. The results show that yield stress fluids can be used for aneurysm embolization provided the yield stress value is 20 Pa or higher. Specifically, flow recirculation in the aneurysm and the size of the inflow jet impingement zone on the aneurysm wall are substantially reduced by yield stress fluid treatment. Overall, this study opens up the possibility of using yield stress fluids for effective embolization of large-volume intracranial aneurysms.

Effects of municipal sewage sludge doses on the yield, some yield ...

African Journals Online (AJOL)

STORAGESEVER

2008-09-03

Sep 3, 2008 ... Whereas grain yield, which was the highest component was ... land application, many studies have been performed ... grain. Analysis of variance was used to compare treatment ... een 17.0 - 164.0 cm depending on the environmental .... municipal sewage sludge for the stabilization of soil contaminated by.

Evaluation of the Effect of Rotation and Application Rate of Nitrogen on Yield, Yield Components and Nitrogen Efficiency Indexes in wheat

Directory of Open Access Journals (Sweden)

R Nasri

2016-02-01

seeding rate of 200 kg ha-1. Soil samples were collected after harvest of each crop from 0 to 30 cm and 31 to 60 cm soil depths using a soil auger. Wheat grain yield (according to 14% moisture obtained by harvesting the central area of 3 in 10 m in each plot. Yield components were determined from two randomly selected areas (2m2 within each plot. Plant samples collected at harvest were separated into grain and straw and oven-dried at 60˚C for 72hr. Biomass and grain sub samples analyzed for total N content using a micro-Kjeldahl digestion with sulfuric acid. The terminology of N efficiency parameters was considered according to Delogu et al, (11 and Lopez-Bellido & Lopez-Bellido, (22, Rahimizadeh et al. (30, Limon-Ortega et al. (20 methods. Results and Discussion The results showed that there were highly significant differences (P ≤ 0.01 in forage yield. There were also significant differences (P ≤ 0.05 in total dry weight, protein content and protein yield between treatments. Perko varieties produced higher fresh and dry matter yield with 69,586 (kg ha-1 and 7147 (kg ha-1, respectively compared to other varieties. Buko varieties showed greater protein percentage with 23.36 compared to the rest of the varieties. The highest and lowest grain yield, with 8345, and 4491 (kg ha-1 were obtained for Buko; wheat rotation and fallow, wheat rotation, respectively. The highest and lowest nitrogen uptake was obtained for Buko; wheat and clover, wheat rotation, respectively. The differences between the rotations were significant for various agronomic nitrogen efficiency. The rotation of oilseed radish and wheat showed greater nitrogen economic performance with 36.20 kg ha-1. By increasing nitrogen rate agronomic performance decreased with the exception in fallow- wheat. Physiological efficiency of nitrogen in fallow-wheat rotation was more than 39 (kg kg-1 of nitrogen. The maximum efficiency of nitrogen recovery was obtained for oilseed radish: wheat and Perko PVH; wheat

correlation studies and path coefficient analysis for seed yield

African Journals Online (AJOL)

Prof. Adipala Ekwamu

African Crop Science Journal, Vol. 21, No. 1, pp. 51 - 59 ... Yield being a quantitative trait has complex inheritance, which is ... Analysis for seed yield and yield components in Ethiopian coriander. 53 ..... The financial assistance of Canadian.

Insights into the role of components of the tumor microenvironment in oral carcinoma call for new therapeutic approaches

International Nuclear Information System (INIS)

Salo, Tuula; Vered, Marilena; Bello, Ibrahim O.; Nyberg, Pia; Bitu, Carolina Cavalcante; Zlotogorski Hurvitz, Ayelet; Dayan, Dan

2014-01-01

The research on oral cancer has focused mainly on the cancer cells, their genetic changes and consequent phenotypic modifications. However, it is increasingly clear that the tumor microenvironment (TME) has been shown to be in a dynamic state of inter-relations with the cancer cells. The TME contains a variety of components including the non-cancerous cells (i.e., immune cells, resident fibroblasts and angiogenic vascular cells) and the ECM milieu [including fibers (mainly collagen and fibronectin) and soluble factors (i.e., enzymes, growth factors, cytokines and chemokines)]. Thus, it is currently assumed that TME is considered a part of the cancerous tissue and the functionality of its key components constitutes the setting on which the hallmarks of the cancer cells can evolve. Therefore, in terms of controlling a malignancy, one should control the growth, invasion and spread of the cancer cells through modifications in the TME components. This mini review focuses on the TME as a diagnostic approach and reports the recent insights into the role of different TME key components [such as carcinoma-associated fibroblasts (CAFs) and inflammation (CAI) cells, angiogenesis, stromal matrix molecules and proteases] in the molecular biology of oral carcinoma. Furthermore, the impact of TME components on clinical outcomes and the concomitant need for development of new therapeutic approaches will be discussed. - Highlights: • Tumor depth and budding, hypoxia and TME cells associate with worse prognosis. • Pro-tumoral CAFs and CAI cells aid proliferation, invasion and spread hypoxia. • Some ECM-bound factors exert pro-angiogenic or pro-tumor activities. • Tumor spread is greatly dependent on ECM proteolysis, mediated by TME cells. • Direct targeting of TME components for treatment is still experimental

Insights into the role of components of the tumor microenvironment in oral carcinoma call for new therapeutic approaches

Energy Technology Data Exchange (ETDEWEB)

Salo, Tuula, E-mail: Tuula.salo@oulu.fi [Department of Diagnostics and Oral Medicine, Institute of Dentistry, University of Oulu, and Medical Research Center, Oulu (Finland); Oulu University Central Hospital, Oulu (Finland); Institute of Dentistry, University of Helsinki, Helsinki (Finland); Vered, Marilena [Institute of Pathology, The Chaim Sheba Medical Center, Tel Hashomer, Ramat Gan (Israel); Department of Oral Pathology and Oral Medicine, School of Dentistry, Tel Aviv University, Tel Aviv 69978 (Israel); Bello, Ibrahim O. [Department of Oral Medicine and Diagnostic Sciences, King Saud University, Riyadh (Saudi Arabia); Nyberg, Pia [Oulu University Central Hospital, Oulu (Finland); Bitu, Carolina Cavalcante [Department of Diagnostics and Oral Medicine, Institute of Dentistry, University of Oulu, and Medical Research Center, Oulu (Finland); Zlotogorski Hurvitz, Ayelet [Department of Oral Pathology and Oral Medicine, School of Dentistry, Tel Aviv University, Tel Aviv 69978 (Israel); Department of Oral and Maxillofacial Surgery, Rabin Medical Center, Beilinson Campus, Petah Tikva (Israel); Dayan, Dan [Department of Oral Pathology and Oral Medicine, School of Dentistry, Tel Aviv University, Tel Aviv 69978 (Israel)

2014-07-15

The research on oral cancer has focused mainly on the cancer cells, their genetic changes and consequent phenotypic modifications. However, it is increasingly clear that the tumor microenvironment (TME) has been shown to be in a dynamic state of inter-relations with the cancer cells. The TME contains a variety of components including the non-cancerous cells (i.e., immune cells, resident fibroblasts and angiogenic vascular cells) and the ECM milieu [including fibers (mainly collagen and fibronectin) and soluble factors (i.e., enzymes, growth factors, cytokines and chemokines)]. Thus, it is currently assumed that TME is considered a part of the cancerous tissue and the functionality of its key components constitutes the setting on which the hallmarks of the cancer cells can evolve. Therefore, in terms of controlling a malignancy, one should control the growth, invasion and spread of the cancer cells through modifications in the TME components. This mini review focuses on the TME as a diagnostic approach and reports the recent insights into the role of different TME key components [such as carcinoma-associated fibroblasts (CAFs) and inflammation (CAI) cells, angiogenesis, stromal matrix molecules and proteases] in the molecular biology of oral carcinoma. Furthermore, the impact of TME components on clinical outcomes and the concomitant need for development of new therapeutic approaches will be discussed. - Highlights: • Tumor depth and budding, hypoxia and TME cells associate with worse prognosis. • Pro-tumoral CAFs and CAI cells aid proliferation, invasion and spread hypoxia. • Some ECM-bound factors exert pro-angiogenic or pro-tumor activities. • Tumor spread is greatly dependent on ECM proteolysis, mediated by TME cells. • Direct targeting of TME components for treatment is still experimental.

Breeding for Grass Seed Yield

DEFF Research Database (Denmark)

Boelt, Birte; Studer, Bruno

2010-01-01

Seed yield is a trait of major interest for many fodder and amenity grass species and has received increasing attention since seed multiplication is economically relevant for novel grass cultivars to compete in the commercial market. Although seed yield is a complex trait and affected...... by agricultural practices as well as environmental factors, traits related to seed production reveal considerable genetic variation, prerequisite for improvement by direct or indirect selection. This chapter first reports on the biological and physiological basics of the grass reproduction system, then highlights...... important aspects and components affecting the seed yield potential and the agronomic and environmental aspects affecting the utilization and realization of the seed yield potential. Finally, it discusses the potential of plant breeding to sustainably improve total seed yield in fodder and amenity grasses....

High yielding tropical energy crops for bioenergy production: Effects of plant components, harvest years and locations on biomass composition.

Science.gov (United States)

Surendra, K C; Ogoshi, Richard; Zaleski, Halina M; Hashimoto, Andrew G; Khanal, Samir Kumar

2018-03-01

The composition of lignocellulosic feedstock, which depends on crop type, crop management, locations and plant parts, significantly affects the conversion efficiency of biomass into biofuels and biobased products. Thus, this study examined the composition of different parts of two high yielding tropical energy crops, Energycane and Napier grass, collected across three locations and years. Significantly higher fiber content was found in the leaves of Energycane than stems, while fiber content was significantly higher in the stems than the leaves of Napier grass. Similarly, fiber content was higher in Napier grass than Energycane. Due to significant differences in biomass composition between the plant parts within a crop type, neither biological conversion, including anaerobic digestion, nor thermochemical pretreatment alone is likely to efficiently convert biomass components into biofuels and biobased products. However, combination of anaerobic digestion with thermochemical conversion technologies could efficiently utilize biomass components in generating biofuels and biobased products. Copyright © 2017 Elsevier Ltd. All rights reserved.

Effect of complementary irrigation on yield components and alternate bearing of a traditional olive orchard in semi-arid conditions

Energy Technology Data Exchange (ETDEWEB)

Lodolini, E.M.; Polverigiani, S.; Ali, S.; Mutawea, M.; Qutub, M.; Pierini, F.; Neri, D.

2016-11-01

Traditional olive orchards are usually not irrigated in the Mediterranean basin, but at those latitudes, the yearly rainfall is frequently insufficient to support equilibrated vegetative growth and high fruit and oil production. This three-year field study investigated the effect of complementary irrigation on olive tree vegetative growth, fruit and oil yield during a biennial alternate bearing cycle in a traditional grove under semi-arid conditions. Adult olive trees (Olea europaea L. cv. Nabali Baladi) were subjected to complementary irrigation in 2011 and 2012 ('on' and 'off' years, respectively) with 6, 10, 15 or 20 m3 of water per tree per season, which corresponded to 14.2%, 23.8%, 35.7% and 47.6% of the whole seasonal evapotranspiration (42 m3 of water per year), respectively. Rain-fed trees were used as control. In 2013, no complementary irrigation was supplied, and any residual effects on the yield components were determined. Results showed that none of the irrigation regimes affected vegetative growth, or olive fruit size (mesocarp and endocarp), as fresh and dry weights. The fruit and oil yield per tree increased compared to the rain-fed conditions only when the threshold of 15 m3 was exceeded, thus inducing a higher crop load compared to the rain-fed control during the 'off' and even further during the 'on' year. No residual effects were registered in 2013. The study showed that complementary irrigation of at least 35% of the seasonal water requirement can produce remarkable positive effects on fruit yield especially during 'on' bearing years. (Author)

Yields Components and 48-H Rumen Dry Matter Degradation of ...

African Journals Online (AJOL)

Two experiments were conducted to study the influence of harvesting date on three sweet potato varieties (TIS-87/0087, TIS-8164 and TIS-2532.OP.1.13). Fodder yields and leaf-to-stem ratio decreased (P < 0.05), while harvest index and 48-h rumen DM degradation increased with maturity from 12 to 20 weeks after ...

Relative ion yields in mammalian cell components using C60 SIMS

Science.gov (United States)

Keskin, Selda; Piwowar, Alan; Hue, Jonathan; Shen, Kan; Winograd, Nicholas

2013-01-01

Time of flight secondary ion mass spectrometry has been used to better understand the influence of molecular environment on the relative ion yields of membrane lipid molecules found in high abundance in a model mammalian cell line, RAW264.7. Control lipid mixtures were prepared to simulate lipid–lipid interactions in the inner and outer leaflet of cell membranes. Compared with its pure film, the molecular ion yields of 1,2-dioleoyl-sn-glycero-3-phosphocholine and 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine are suppressed when mixed with 2-dipalmitoyl-sn-glycero-3-phosphocholine. In the mixture, proton competition between 1,2-dioleoyl-sn-glycero-3-phosphocholine, 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine, and 2-dipalmitoyl-sn-glycero-3-phosphocholine led to lower ionization efficiency. The possible mechanism for ion suppression was also investigated with 1H and 13C nuclear magnetic resonance spectroscopy. The formation of a hydroxyl bond in lipid mixtures confirms the mechanism involving proton exchange with the surrounding environment. Similar effects were observed for lipid mixtures mimicking the composition of the inner leaflet of cell membranes. The secondary molecular ion yield of 1-palmitoyl-2-oleoyl-sn-glycero-3-phospho-L-serine was observed to be enhanced in the presence of 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphoethanolamine. PMID:25140069

Enhancement of growth, photosynthetic performance and yield by exclusion of ambient UV components in C3 and C4 plants.

Science.gov (United States)

Kataria, Sunita; Guruprasad, K N; Ahuja, Sumedha; Singh, Bupinder

2013-10-05

A field experiment was conducted under tropical climate for assessing the effect of ambient UV-B and UV-A by exclusion of UV components on the growth, photosynthetic performance and yield of C3 (cotton, wheat) and C4 (amaranthus, sorghum) plants. The plants were grown in specially designed UV exclusion chambers, wrapped with filters that excluded UV-B (plant species responded to UV exclusion by a significant increase in plant height, leaf area, leaf biomass, total biomass accumulation and yield. Measurements of the chlorophyll, chlorophyll fluorescence parameters, gas exchange parameters and the activity of Ribulose-1,5-bisphosphate carboxylase (Rubisco) by fixation of (14)CO2 indicated a direct relationship between enhanced rate of photosynthesis and yield of the plants. Quantum yield of electron transport was enhanced by the exclusion of UV indicating better utilization of PAR assimilation and enhancement in reducing power in all the four plant species. Exclusion of UV-B in particular significantly enhanced the net photosynthetic rate, stomatal conductance and activity of Rubisco. Additional fixation of carbon due to exclusion of ambient UV-B was channeled towards yield as there was a decrease in the level of UV-B absorbing substances and an increase in soluble proteins in all the four plant species. The magnitude of the promotion in all the parameters studied was higher in dicots (cotton, amaranthus) compared to monocots (wheat, sorghum) after UV exclusion. The results indicated a suppressive action of ambient UV-B on growth and photosynthesis; dicots were more sensitive than monocots in this suppression while no great difference in sensitivity was found between C3 and C4 plants. Experiments indicated the suppressive action of ambient UV on carbon fixation and yield of C3 and C4 plants. Exclusion of solar UV-B will have agricultural benefits in both C3 and C4 plants under tropical climate. Copyright © 2013 Elsevier B.V. All rights reserved.

Effects of Irrigation and Nitrogen Application Rates on Yield and Yield Components of Corn, Sesame and Sugar beet in Mashhad Climatic Condition

Directory of Open Access Journals (Sweden)

R Heydari Pour

2015-07-01

Full Text Available In many crops, incorrect management of nitrogen and water is one of the most important factors in the resources productivity such as water and nitrogen. In order to evaluate the effects of different nitrogen levels (zero, 50, 100 and 150 kg ha-1 and irrigation application rates (100, 75 and 50% of water requirement per species on corn, sesame and sugar beet, three separate experiments was conducted in Agricultural Research Station of Ferdowsi University of Mashhad, Iran, in 2009-2010 growing season. Three separate experiments were arranged by strip plots in randomized complete block design, with three replications. The results showed that effect of irrigation application rates on biological yield and grain number per ear and interaction effects of water × nitrogen on plant height, 100 grain weight and grain yield of corn was significant. With decreasing irrigation over 25 % water requirements, the highest grain yield (4.93 ton ha-1 in corn observed by applying nitrogen equal to 50 kg.ha-1. In addition, the highest maize yield (9.41 ton.ha-1 in mentioned was obtained by supplying 100 % water requirements. Effects of Irrigation levels on plant height and the interaction effects of water × nitrogen on 1000 grain weight in sesame was significant. Under no water stress, the highest grain yield (1.22 ton ha-1 in sesame was obtained with applying 50kg nitrogen per ha. With supplying 75% water requirements plus 50 kg nitrogen per hactar, maximum yield of sesame (820 kg ha-1 was obtained. Results of this study indicated that interaction between studied factors had insignificant effect on economic and biological yield in sugar beet. With supplying 25% water requirements plus 50 kg nitrogen per ha, maximum yield of sugar beet (58.37 ton ha-1 was achieved. It seems that suitable nitrogen management can be considered as approach in optimize the water consuming.

Evaluation of Effect of Chemical and Organic Fertilizers on Growth Characteristics, Yield and Yield components of three Sesame Ecotypes (Sesamum indicum L.

Directory of Open Access Journals (Sweden)

M Goldani

2014-07-01

Full Text Available Using organic fertilizers is cause increase soil fertility, improving crop growth and production. For this purpose a greenhouse experiment was carried out in factorial arrangement based on a completely randomized design with three replications during 2011 year. First factor included: three sesame ecotype (MSC3, MSC6, MSC7 and second factor was 6 fertilizer treatments that included: Incorporation manure and chemical fertilizer (216 g manure and 1 gram chemical fertilizer NPK, Chemical fertilizer (2 g NPK, Vermicompost (192 g, Manure ( 228 g, Compost Sulfur granules (192 g per vase and Control (without any manure or fertilizer. Results indicated that different manure treatments had significant effect on morphological and yield components traits, as the most number and length branch per plant was obtained from incorporation manure and chemical fertilizer treatment. Appling incorporation manure and chemical fertilizer treatment had the most biomass in MSC3 ecotype that in comparison of control treatment was increased almost 73 percent. Consuming incorporation manure and chemical fertilizer treatment in MSC3 ecotype was also obtained the most capsule per plant (21.2, number seed per capsule (54.4, 100-seed weight (0.257 g and seed per plant with (1.95 g. The least seed weight per plant with 0.450 g was observed in MSC7 ecotype from application of control treatment. Response of three sesame ecotype (MSC3, MSC6, MSC7 to applied vermin-compost manure was similar; as the amount of seed weight per plant was increased more than 1 g per plant in all these ecotypes and in others fertilizer treatments was not observed this trend. There was significant positive correlation between seed weight per plant and number of capsule per plant (r=0.83**, height (r=0.68** and biomass (r=0.51**. The results showed that incorporation manure and chemical fertilizer was improved on growth and yield characteristics of sesame plant.

Weed biomass and economic yield of wheat (Triticum aestivum) as ...

African Journals Online (AJOL)

Yomi

2012-01-24

Jan 24, 2012 ... INTRODUCTION ... to control weeds in conjunction with cultural practices. Jarwar et al. (1999) .... Wheat grain yield is an interplay of yield components especially ... The biological yield expresses the overall growth of crop.

Studies on seed yield potential of some selected kenaf (Hibiscus ...

African Journals Online (AJOL)

SAM

2014-06-11

Jun 11, 2014 ... Kenaf seed yield depends on morpho-physiological traits between varieties, .... separated using Duncan's Multiple Range Test (DMRT) at 5% ... Mean squares derived from combined analysis of variance for seed yield and yield components in 20 .... environment interaction and yield stability in winter wheat.

Invited review: A commentary on predictive cheese yield formulas.

Science.gov (United States)

Emmons, D B; Modler, H W

2010-12-01

Predictive cheese yield formulas have evolved from one based only on casein and fat in 1895. Refinements have included moisture and salt in cheese and whey solids as separate factors, paracasein instead of casein, and exclusion of whey solids from moisture associated with cheese protein. The General, Barbano, and Van Slyke formulas were tested critically using yield and composition of milk, whey, and cheese from 22 vats of Cheddar cheese. The General formula is based on the sum of cheese components: fat, protein, moisture, salt, whey solids free of fat and protein, as well as milk salts associated with paracasein. The testing yielded unexpected revelations. It was startling that the sum of components in cheese was SofC) in cheese. The apparent low estimation of SofC led to the idea of adjusting upwards, for each vat, the 5 measured components in the formula by the observed SofC, as a fraction. The mean of the adjusted predicted yields as percentages of actual yields was 99.99%. The adjusted forms of the General, Barbano, and Van Slyke formulas gave predicted yields equal to the actual yields. It was apparent that unadjusted yield formulas did not accurately predict yield; however, unadjusted PY%AY can be useful as a control tool for analyses of cheese and milk. It was unexpected that total milk protein in the adjusted General formula gave the same predicted yields as casein and paracasein, indicating that casein or paracasein may not always be necessary for successful yield prediction. The use of constants for recovery of fat and protein in the adjusted General formula gave adjusted predicted yields equal to actual yields, indicating that analyses of cheese for protein and fat may not always be necessary for yield prediction. Composition of cheese was estimated using a predictive formula; actual yield was needed for estimation of composition. Adjusted formulas are recommended for estimating target yields and cheese yield efficiency. Constants for solute exclusion

Cognitive insight: A systematic review.

Science.gov (United States)

Van Camp, L S C; Sabbe, B G C; Oldenburg, J F E

2017-07-01

Cognitive insight is the ability to re-evaluate thoughts and beliefs in order to make thoughtful conclusions. It differs from clinical insight, as it focuses on more general metacognitive processes. Therefore, it could be relevant to diverse disorders and non-clinical subjects. There is a growing body of research on cognitive insight in individuals with and without psychosis. This review has summarised the current state of the art regarding this topic. We conclude that while cognitive insight in its current form seems valid for use in individuals with psychosis, it is less so for individuals without psychosis. Additionally, higher cognitive insight not always leads to better psychological functioning. For instance, higher levels of self-reflection are often associated with depressive mood. We therefore recommend the sub-components of cognitive insight to be studied separately. Also, it is unclear what position cognitive insight takes within the spectrum of metacognitive processes and how it relates to other self-related concepts that have been defined previously in literature. Combining future and past research on cognitive insight and its analogue concepts will help in the formation of a uniform definition that fits all subjects discussed here. Copyright © 2017. Published by Elsevier Ltd.

Effect of Seed Priming, Sowing methods and Bio-fertilizers on Yield and Yield Components of Seedy Watermelon (Citrullus Lanatus

Directory of Open Access Journals (Sweden)

M Zarandi

2018-02-01

Full Text Available Introduction Watermelon (Citrullus Lanatus is one of the most important fresh fruits in Iran particularly during summer. After China, in terms of production and cultivation area, Iran placed second in the world. Research conducted in different regions (especially in arid and semi-arid regions, like Iran indicated that poor germination and establishment of seedlings in the field causes low yield, particularly in vegetables. Seed priming, (to increase the percentage and rate of germination and transplanting to increase plant establishment and use of bio-fertilizers to increase food availability during the growing season are inevitable to transfer to ecological agriculture. The purpose of this research was to evaluate the effect of seeds osmopriming, transplanting and bio-fertilizers on watermelon grain yield. Materials and Methods This experiment was conducted at split plot based on complete block design with three replications in the Laboratory, Greenhouse and the Farm of the Faculty of Agriculture, Ferdowsi University of Mashhad in 2013. First factor was seed priming in two levels (unprimed and primed, the second factor was transplanting in two levels (direct sowing and transplantation and the third factor was bio-fertilizers containing pseudomonas and Azotobacter in two levels (non bio-fertilizers and bio-fertilizers. Leaf area index (LAI, number of fruits per plant, number of seeds per fruit, 1000 seed weight, grain yield and total dry matter were determined. Results and Discussion Transplants produced using osmoprimed seeds that had been sprayed with bio-fertilizers on the field (T2P2K2 had higher LAI than the other treatments (Table 3. Bio-fertilizers in both transplanting and direct sowing produced more LAI, but osmopriming of seeds with PEG 6000 had little impact on LAI (Table 3. LAI is one of the growth parameters which had a great effect to achieve maximum yield that needs to be at higher level before flowering. Izadkhah et al. (2010 and

Screening of post emergence herbicides for weed control in cotton (GOSSYPIUM HIRSUTUM) and their effect on yield and yield components

International Nuclear Information System (INIS)

Hussain, N.; Khan, M.B.; Khan, M.A.; Hameed, R.A.

2005-01-01

Response of varying herbicides at different levels: round up 490 G/L at the rate of 4.7 L ha/sup -1/ and 1.5 L ha/sup -1/ (Glyphosat) and Gramaxone 20 EC (Paraquat) at the rate of 2.5 L ha/sup -1/ against untreated (control, were investigated to cotton cultivar CIM-473 under field conditions during Kharif 2002 at Agronomic Research Area. Central Cotton Research Institute, Multan. Significant control of weeds and increase in yield and yield contributing factors were observed. It was indicated that maximum yield and weed control were obtained by using Round up (Glyphosate) at the rate of 4.7 L ha/sup -1/ as compared to other treatments including untreated (control). Average boll weight was not significant among treatments but significant against control. Maximum net profit was obtained from Round up 490 G/L when treated at the rate of 4.7 L ha/sup -1/ than all other treatments. (author)

Genetic insight into yield-associated traits of wheat grown in multiple rain-fed environments.

Directory of Open Access Journals (Sweden)

Xianshan Wu

Full Text Available BACKGROUND: Grain yield is a key economic driver of successful wheat production. Due to its complex nature, little is known regarding its genetic control. The goal of this study was to identify important quantitative trait loci (QTL directly and indirectly affecting grain yield using doubled haploid lines derived from a cross between Hanxuan 10 and Lumai 14. METHODOLOGY/PRINCIPAL FINDINGS: Ten yield-associated traits, including yield per plant (YP, number of spikes per plant (NSP, number of grains per spike (NGS, one-thousand grain weight (TGW, total number of spikelets per spike (TNSS, number of sterile spikelets per spike (NSSS, proportion of fertile spikelets per spike (PFSS, spike length (SL, density of spikelets per spike (DSS and plant height (PH, were assessed across 14 (for YP to 23 (for TGW year × location × water regime environments in China. Then, the genetic effects were partitioned into additive main effects (a, epistatic main effects (aa and their environment interaction effects (ae and aae by using composite interval mapping in a mixed linear model. CONCLUSIONS/SIGNIFICANCE: Twelve (YP to 33 (PH QTLs were identified on all 21 chromosomes except 6D. QTLs were more frequently observed on chromosomes 1B, 2B, 2D, 5A and 6B, and were concentrated in a few regions on individual chromosomes, exemplified by three striking yield-related QTL clusters on chromosomes 2B, 1B and 4B that explained the correlations between YP and other traits. The additive main-effect QTLs contributed more phenotypic variation than the epistasis and environmental interaction. Consistent with agronomic analyses, a group of progeny derived by selecting TGW and NGS, with higher grain yield, had an increased frequency of QTL for high YP, NGS, TGW, TNSS, PFSS, SL, PH and fewer NSSS, when compared to low yielding progeny. This indicated that it is feasible by marker-assisted selection to facilitate wheat production.

Effect Of Cowpea Planting Density On Growth, Yield And ...

African Journals Online (AJOL)

Effect Of Cowpea Planting Density On Growth, Yield And Productivity Of Component Crops In Cowpea/Cassava Intercropping System. ... Similarly, fresh root yield (t/ha) of cassava was influenced by cropping system and population density in 2005/2006, but not in 2004/2005 cropping season. Cassava tuber yield was ...

The effect of biological fertilizers on yield, yield components and seed oil contents of three cultivars of canola (Brassica napus L.

Directory of Open Access Journals (Sweden)

A Koocheki

2016-05-01

Full Text Available Introduction Canola is the world third oil crop with 25 to 55 percent oil content (Hezbavi & Minaei, 2008. In recent years, tendency towards expansion of the acreage of canola in Iran has been increasing and for the years 2010-2011 an area of 93000 ha with a total production of 190000 tons has been reported (Ministry of Jihad of Agriculture, 2013. Application of biological fertilizers which are environmentally friendly agents have been reported to enhance yield and quality of different crops (Shoghi Kalkhoran et al., 2012; Afrasiabi et al., 2011. The purpose of the present study was to investigate the effects of biological fertilizers on quantitative and quality criteria of canola. Material and methods For this study, a factorial arrangement based on randomized complete block design and three replicates was used. The experimental treatments were three canola cultivars namely Okapi, Zarfam and Modena which was combined with four levels of biological fertilizers: Nitroxin, Phosphat solubilizing bacteria (PSB, Nitroxin+PSB and a control. Seeds were planted in plots of 2×3 m2. All field managements were carried out based on conventional practices. The measured criteria were plant height, number of pods per plant, 1000- seed weight, biomass yield, harvest index, oil content and yield. Results and discussion The results showed that in all studied criteria except 1000- seed weight there were significant differences between cultivars. Different fertilizer treatments had a significant effect on all criteria except 1000- seed weight and HI. Modena cultivar had the highest oil yield and quantitative characteristics. Composition of phosphate solubilizing bacteria+nitroxin also had the highest oil yield and quantitative characteristics. The interactions between biofertilizer treatments and cultivars in all criteria were not significant. The result of this experiment indicated the effectiveness of use of biofertilizers. References Afrasiabi, M., Amini

Evolution of Grain Yield and its Components Relationships in Bread Wheat Genotypes under Full Irrigation and Terminal Water Stress Conditions Using Multivariate Statistical Analysis

Directory of Open Access Journals (Sweden)

S Mohammadi

2014-07-01

Full Text Available To study relationships between effective traits on wheat grain yield, the varieties Zarrin and Alvand, and some promising lines i.e. C-81-4, C-81-10, C-81-14 and C-82-12 were investigated at three sowing dates including 10 October, 1 November and 21 November. The experiment was carried out using strip plot in RCBD with three replications under two different water conditions including full-irrigation and terminal water stress at Miyandoab Agricultural Research Station in 2005-06 and 2006-07 cropping seasons. The results showed that under both full irrigation and terminal water stress conditions, grain yield had positive and significant correlation with days to heading, days to maturity, plant height, number of spikes/m2 and 1000 grain weight. Stepwise regression analysis revealed that 83 percent of yield variation under non-stressed conditions could be determined by days to maturity and number of spikes/m2 (R2 = 83% whereas these traits explained 87% of yield variation under stress conditions (R2= 87%. Path analysis indicated that number of spikes/m2 and days to maturity had the greatest positive direct and indirect effect on grain yield, under both conditions. The results of factor analysis under non-stressed condition showed that three factors explained 77% of total variation; these factors were called grain yield components, grain characteristics and plant phonology. Under non-stressed condition two factors (that were called grain yield and phenology, and plant morphology explained 88% of total variation. Cluster analysis through ward method, classified days to maturity and number of spikes/m2 in the same cluster where the grain yield was put under both conditions. It was concluded that under different sowing dates, selection based on days to maturity and number spikes/m2 could indirectly led to higher yield under both normal and water stress conditions.

Effects of Super-Absorbent Polymer Application on Yield and Yield Components of Rapeseed (Brassica napus L.

Directory of Open Access Journals (Sweden)

Fariborz SHEKARI

2015-09-01

Full Text Available Limitation of water resources and its great impact on agricultural and natural resources play a crucial role in the efficiency of water use. Applying super absorbent polymer to the soil may be one of the methods to minimize the stress of weather dryness in arid and semi-arid regions. In order to evaluate the effects of hydrophilic polymer application on yield and water use efficiency of rapeseed plants, an experiment was conducted under field condition in 2012 at the Research Farm of the Faculty of Agriculture, University of Maragheh. Treatments’ factors were: (i 3 super absorbent polymers (SAP (Taravat A200 levels of 0 (without application, 75 and 150 kg ha-1 A200 application, (ii three irrigation levels of 80, 120 and 180 mm evaporation from class A basin in main plots, (iii two cultivars ʻHyola 401ʼ and ʻRVSʼ in sub plots as factorial split plot combination based on completely randomized block design with three replications. The results showed that in all of the measured traits within the experiment there were significant differences between SAP levels. Furthermore, increasing irrigation interval led to an increase in a thousand seeds’ weight, but decreased seed yield. Increasing water stress raised seed oil percent and infertile silique and subsequently resulted in reduced oil yield. ʻHyola 401ʼ was more susceptible to embryo abortion compared with ʻRVSʼ. As a conclusion of the research, SAP (A200 application in quantities smaller than 75 kg ha-1 may be recommended for rapeseed production under field condition.

Effect of Component Population on the Growth and Yield of Maize ...

African Journals Online (AJOL)

Field experiment to determine the optimum component populations of maize (Zea mays L.) and egusi melon Colocynthis citrullus L. Schrad) component crops in intercrop were conducted in 2004 and 2005 cropping seasons. There were three maize populations (17,780; 26,670 and 53,330 plants/ha), three egusi melon ...

Yield components, yield and seed quality of cowpea in Vitória da Conquista, Bahia = Componentes de produção, produtividade e qualidade de sementes de feijão-caupi em Vitória da Conquista, Bahia.

Directory of Open Access Journals (Sweden)

Alexandre Carneiro da Silva

2014-12-01

Full Text Available The objective with this study was to evaluate the components of production, productivity and quality of seeds of cowpea cultivars grown in Vitória da Conquista, Bahia. For this, an experiment was conducted in the statistical design of randomized blocks, with eight cultivars (BRS Marataoã, BRS Paraguaçu, BRS Pajeú, BRS Xiquexique, BRS Guariba, BRS Potengi, BRS Cauamé and BRS Itaim and four replications. Were evaluated the yield components: number of pods per plant (NVP; number of seeds per pod (NSV; weight of hundred seeds (P100; percentage of plant survival (%SBV and seed yield (PROD. To evaluate the physiological quality of the seeds, was determined the water content (%U and mass of thousand seeds (MMIL, and performed tests of germination percentage (%G, germination first count (PC, electrical conductivity (CE, percentage (%E and speed index of seedling emergence (IVE. Data were subjected to analysis of variance and mean ratings compared by Tukey test at 5% probability of error, and yield components correlated by the method of Pearson. The high seed yield achieved for all cultivars, averaging 1749.08 kg ha-1, and the good seed quality, which meets the standards of production and marketing indicate that Vitoria da Conquista, Bahia has favorable conditions for production of seeds of cowpea, with sowing in November. The number of pods per plant is the yield component that most influences in seed yield.= - Objetivou-se com este trabalho avaliar os componentes de produção, a produtividade e a qualidade de sementes de cultivares de feijão-caupi cultivadas em Vitória da Conquista, Bahia. Para isso, um experimento foi conduzido no delineamento estatístico de blocos ao acaso, com oito cultivares (BRS Marataoã, BRS Paraguaçu, BRS Pajeú, BRS Xiquexique, BRS Guariba, BRS Potengi, BRS Cauamé e BRS Itaim e quatro repetições. Foram avaliados os componentes de produção: número de vagens por planta (NVP; número de sementes por vagem (NSV

Assessment of genotype x environment interaction on yield and ...

African Journals Online (AJOL)

user

2011-04-11

Apr 11, 2011 ... yield and yield components of durum wheat genotypes ... The results of combined analysis of variance showed a strong influence of the ... Stability is defined as the early prediction of environmental im- ... Many resear-.

IMPACT OF LIME, BIOMASS ASH AND COMPOST AS WELL AS PREPARATION OF EM APPLICATIONS ON GRAIN YIELD AND YIELD COMPONENTS OF WHEAT

Directory of Open Access Journals (Sweden)

Sławomir Stankowski

2014-10-01

Full Text Available Field experiment was conducted in 2013 in Duninowo (54o539’ N, 16o830’ E. The experimental factors were: I. factor - 6 variants of fertilization, and II. - two level of EM preparations. The aim of this study was to evaluate the impact of ash from biomass by comparing its effect with the calcium fertilizer and compost BIOTOPE in conjunction with the preparation of microbiological Effective Microorganisms (EM. The impact of ash from biomass introduced into the soil on yield and yield structure and physiological parameters of spring wheat was analyzed No significant impact of the various variants of fertilizer application on the yielding of spring wheat cv.Bombona was confirmed. As a result of the form of compost fertilizer BIOTOPE, an increase in the content of chlorophyll in leaves of wheat cv Bombona (SPAD and the size of canopy assimilation area per unit area of the field (LAI. The application of EM did not affect the physiological parameters (yield, the number of ears per area unit, SPAD, LAI characterizing the spring wheat cv. Bombona.

Ammonia volatilization and yield components after application of polymer-coated urea to maize

Directory of Open Access Journals (Sweden)

Eduardo Zavaschi

2014-08-01

Full Text Available A form of increasing the efficiency of N fertilizer is by coating urea with polymers to reduce ammonia volatilization. The aim of this study was to evaluate the effect of polymer-coated urea on the control of ammonia volatilization, yield and nutritional characteristics of maize. The experiment was carried out during one maize growing cycle in 2009/10 on a Geric Ferralsol, inUberlândia, MG, Brazil. Nitrogen fertilizers were applied as topdressing on the soil surface in the following urea treatments: polymer-coated urea at rates of 45, 67.5 and 90 kg ha-1 N and one control treatment (no N, in randomized blocks with four replications. Nitrogen application had a favorable effect on N concentrations in leaves and grains, Soil Plant Analysis Development (SPAD chlorophyll meter readings and on grain yield, where as coated urea had no effect on the volatilization rates, SPAD readings and N leaf and grain concentration, nor on grain yield in comparison to conventional fertilization.

Evaluation of quality protein maize hybrids for yield, association of ...

African Journals Online (AJOL)

The study was initiated with the objectives to evaluate quality protein maize pipeline varieties in terms of yield and yield related traits, and to investigate association of yield with its components and other desirable traits at Bako. Eighteen genotypes were planted in randomized complete block design with three replications.

Insights into the redox components of dissolved organic matters during stabilization process.

Science.gov (United States)

Yuan, Ying; Xi, Bei-Dou; He, Xiao-Song; Ma, Yan; Zhang, Hui; Li, Dan; Zhao, Xin-Yu

2018-05-01

The changes of dissolved organic matter (DOM) components during stabilization process play significant effects on its redox properties but are little reported. Composting is a stabilization process of DOM, during which both the components and electron transfer capacities (ETCs) of DOM change. The redox components within compost-derived DOM during the stabilization process are investigated in this study. The results show that compost-derived DOM contained protein-like, fulvic-like, and humic-like components. The protein-like component decreases during composting, whereas the fulvic- and humic-like components increase during the process. The electron-donating capacity (EDC), electron-accepting capacity (EAC), and ETC of compost-derived DOM all increase during composting but their correlations with the components presented significant difference. The humic-like components were the main functional component responsible for both EDC and ETC, whereas the protein- and fluvic-like components show negative effects with the EAC, EDC, and ETC, suggesting that the components within DOM have specific redox properties during the stabilization process. These findings are very meaningful for better understanding the geochemical behaviors of DOM in the environment.

Response of Yield, Yield Components and Nutrient Concentration of Cumin (Cuminum cyminum L. to Mycorrhizal Symbiosis under Salt Stress Conditions

Directory of Open Access Journals (Sweden)

M. Bijhani

2016-01-01

Full Text Available To study the effects of mycorrhizal inoculation and salinity stress on the growth, yield and nutrient concentrations of cumin (Cuminum cyminum L., an experiment was carried out as split plot in a completely randomized block design at Zabol University Research Farm in 2013. Treatments consisted of three salinity stresses: 1 (control, 5 and 10 dSm-1, was considered as the main treatments, and four levels of mycorrhizal inoculation (Glomus intraradices, G. etanicatum, G. hoi and non-inoculation as control as the sub-treatments. The effects of salinity on all traits under study, except umbers per plant, were significant, and severe stress (10 dSm-1 reduced 100 seed weight, number of seeds per umbel, concentrations of phosphorus, calcium and magnesium in seeds by 17.71, 11.4, 14.95, 46.08, 13.60 %, respectively, as compared to the control. The numbers of seeds per umbel and phosphorus concentration in seed were highest in G. intraradices with 28.4 and 54.4%, respectively as compared to control and umbels per plant was also maximum (9.7 by using G. etanicatum. Mycorrhizal inoculation did not have significant effect on calcium and magnesium concentrations in seeds and 1000 seed weight. However mycorrhiza × salinity stress interaction was significant about concentration of sodium, potassium and sodium to potassium ratio (Na/K in seeds, as well as seed yield and seed number per plant. Among the species of mycorrhiza, applied G. intraradices had better performance in severe salinity (10 dS-1 and increased seed yield and seed number per plant by 28.5 and 47.6%, respectively in comparision control. The results suggested that mycorrhizal inoculation improves water absorption by plant. Yield increases of plants under different salinity regimes dependent on their mycorrhizal inoculation.

Examining the roles that changing harvested areas, closing yield-gaps, and increasing yield ceilings have had on crop production

Science.gov (United States)

Johnston, M.; Ray, D. K.; Mueller, N. D.; Foley, J. A.

2011-12-01

With an increasing and increasingly affluent population, there has been tremendous effort to examine strategies for sustainably increasing agricultural production to meet this surging global demand. Before developing new solutions from scratch, though, we believe it is important to consult our recent agricultural history to see where and how agricultural production changes have already taken place. By utilizing the newly created temporal M3 cropland datasets, we can for the first time examine gridded agricultural yields and area, both spatially and temporally. This research explores the historical drivers of agricultural production changes, from 1965-2005. The results will be presented spatially at the global-level (5-min resolution), as well as at the individual country-level. The primary research components of this study are presented below, including the general methodology utilized in each phase and preliminary results for soybean where available. The complete assessment will cover maize, wheat, rice, soybean, and sugarcane, and will include country-specific analysis for over 200 countries, states, territories and protectorates. Phase 1: The first component of our research isolates changes in agricultural production due to variation in planting decisions (harvested area) from changes in production due to intensification efforts (yield). We examine area/yield changes at the pixel-level over 5-year time-steps to determine how much each component has contributed to overall changes in production. Our results include both spatial patterns of changes in production, as well as spatial maps illustrating to what degree the production change is attributed to area and/or yield. Together, these maps illustrate where, why, and by how much agricultural production has changed over time. Phase 2: In the second phase of our research we attempt to determine the impact that area and yield changes have had on agricultural production at the country-level. We calculate a production

Assessment of competition and yield advantage in addition series of barley variety mixtures

Directory of Open Access Journals (Sweden)

Kari Jokinen

1991-09-01

Full Text Available In an addition series experiment the competition between three barley varieties (Agneta, Arra and Porno and the yield performance of mixtures were evaluated. Also two levels of nitrogen fertilization (50 and 100 kgN/ha were applied. Two approaches (the replacement series and the linear regression equation were used to analyse the competitive relationship based on grain yields in two-component mixtures. In three component mixtures the replacement series approach was applied. Both methods showed a similar dominance order of the varieties with Arra always being dominant and Agneta subordinate. The relationship between varieties was independent of the number of varieties in the mixture. Increase in available nitrogen strengthened the competitiveness of Arra especially in the dense, two-variety mixtures. Some mixtures over yielded but the differences were not statistically significant. The yield advantage based on relative yield total or on the ratio of actual and expected yield was greatest when the density and nitrogen fertilization were low and especially when one component in the mixture was a rather low yielding variety (Agneta. The land equivalent ratios (LER (the reference pure culture yield was the maximum yield of each variety were close to one, suggesting that under optimal growing conditions the yield advantage of barley varietal mixtures is marginal.

Genetic basis of yield and some yield related traits in basmati rice

International Nuclear Information System (INIS)

Saleem, M.Y.; Haq, M.A.; Mirza, J.I.

2010-01-01

Additive, dominance and epistasis components of genetic variation for yield and some yield related traits were assessed through modified triple test cross technique in Basmati rice. Epistasis was found an important part of genetic variation for plant height, tillers per plant, secondary branches per panicle, grains per panicle, 1000-grain weight and yield per plant except primary branches per panicle and panicle length. Bifurcation of epistasis showed that additive x additive (i) type and additive x dominance + dominance x dominance (j + l) types of non-allelic interactions were involved in the expression of these traits. Additive and dominance type of gene action influenced the expression of primary branches per panicle and panicle length. No evidence of directional dominance was observed for these two traits. For plant height, tillers per plant, secondary branches per panicle, grains per panicle, 1000-grain weight and yield per plant, recurrent selection or bi parental mating may be exercised in F2 and following generations however, selection of desired plants may be postponed till F5 or F6 generations to permit maximum obsession of epistatic effects to develop desired cultivar(s) in Basmati rice.(author)

Genetic control of late blight, yield and some yield related traits in tomato (lycopersicon esculentum mill.)

International Nuclear Information System (INIS)

Saleem, M.Y.; Asghar, M.; Khan, A.R.; Iqbal, Q.

2011-01-01

Genetic control of late blight (LB) and some economic traits was assessed to identify genotypes suitable for the hybrids were derived from crossing of 2 male sterile lines viz., development of late blight resistant hybrids in tomato. 10 F/sub 1/ hybrid were derived from crossing of 2 male sterile lines viz., TMS1 and TMS2 with 5 elite lines viz., Nagina, Riogrande, Roma, 88572 and Picdenato according to line x tester technique. Disease resistance was measured using detached leaf and whole plant assay techniques. Data were also recorded for days to maturity, number of fruit per plant, single fruit weight and yield per plant. The analysis of variance showed significant differences among crosses, lines, testers and line x tester interaction for almost all parameters. Estimate of genetic components indicated preponderance of additive type of gene action for detached leaf assay, whole plant assay, number of fruit per plant and yield per plant whereas non-additive type of gene action for days to maturity and single fruit weight. Among parents, TMS2, Nagina, Roma and Picdenato showed significant favorable general combing ability (GCA) effects for disease rating traits while TMS1 and Riogrande indicated desirable GCA effects for yield and some yield related traits. Among hybrids, TMS2 x Roma and TMS1 x Riogrande had significant specific combing ability (SCA) effects for detached and whole plant assays. However, hybrid TMS2 x Roma appeared as good combination of LB resistance as it had both parents with desirable GCA effects. All hybrids showed average type of SCA effects for yield and yield components. Genetic control of LB revealed that a multiple crossing program involving genotypes with high GCA effects would be rewarding to identify LB resistant genotypes in early generations. (author)

Modelling of seed yield and its components in tall fescue (Festuca ...

African Journals Online (AJOL)

AJL

2011-10-03

Oct 3, 2011 ... number spikelet -1 (Y4), seed weight (Y5), and the seed yield (Z) of tall fescue were determined in field experiments from 2003 to .... the time of fertilisation (X1), the quantity of irrigation (X2), the amount of N applied (X3), the ...... certain agronomical traits in soybean [Glycine max (L.) Merr.]. Afr. J. Biotechnol.

From noise to synthetic nucleoli: can synthetic biology achieve new insights?

Science.gov (United States)

Ciechonska, Marta; Grob, Alice; Isalan, Mark

2016-04-18

Synthetic biology aims to re-organise and control biological components to make functional devices. Along the way, the iterative process of designing and testing gene circuits has the potential to yield many insights into the functioning of the underlying chassis of cells. Thus, synthetic biology is converging with disciplines such as systems biology and even classical cell biology, to give a new level of predictability to gene expression, cell metabolism and cellular signalling networks. This review gives an overview of the contributions that synthetic biology has made in understanding gene expression, in terms of cell heterogeneity (noise), the coupling of growth and energy usage to expression, and spatiotemporal considerations. We mainly compare progress in bacterial and mammalian systems, which have some of the most-developed engineering frameworks. Overall, one view of synthetic biology can be neatly summarised as "creating in order to understand."

Effects of Nano-Zinc oxide and Seed Inoculation by Plant Growth Promoting Rhizobacteria (PGPR on Yield, Yield Components and Grain Filling Period of Soybean (Glycine max L.

Directory of Open Access Journals (Sweden)

R. Seyed Sharifi

2016-02-01

promoting rhizobacteria application on yield, yield components and grain filling period of soybean. Materials and Methods In order to study the effects of Nano-Zinc oxide and seed inoculation with Brady rhizobium and plant growth promoting rhizobacteria on yield and some agronomic characteristics of soybean, a factorial experiment based on randomized complete block design with three replications was conducted in 2013 at the research farm of the Islamic Azad University, Ardabil Branch. Factors were included foliar application of Nano-Zinc oxide at four levels (Zero as control, 0.3, 0.6 and 0.9 g l-1 and seed inoculation with Brady rhizobium and plant growth promoting rhizobacteria at five levels (without inoculation as control, seed inoculation with Brady rhizobium japanicum, seed inoculation with Brady rhizobium japanicum+Azosprillum lipoferum strain OF, seed inoculation with Brady rhizobium japanicum+Psedomonas putida, seed inoculation with Brady rhizobium japanicum+ Azosprillum lipoferum strain OF+ Psedomonas putida. Results and Discussion The results of growth indices showed that the maximum total dry matter (530 g m-2, crop growth rate (9.48 g.m-2.day-1 and relative growth rate (0.1 g.g-1.day-1 were obtained at foliar application of 0.9 g l-1 Nano-Zinc oxide×seed inoculation with rhizobium+Azosprillum+ Psedomonas and the least of these indices were obtained without of foliar application Nano-Zinc oxide × seed inoculation. The results showed that plant height, the number of nodules per plant, the number of pod per plant, grain yield and grain 100 weight were significantly affected by Nano-Zinc oxide, seed inoculation and interaction of Nano-Zinc oxide×seed inoculation. Maximum of plant height, grain 100 weight, the number of nodules per plant and grain yield were obtained at foliar application of 0.9 g l-1 of Nano-Zinc oxide×seed inoculation with rhizobium and PGPR. Dry weight of nodules per plant, the number of pod per plant and the number of grains per plant

The Effect of Application of Nitrogen Fertilizer and Nano-Organic Manure on Yield, Yield Components and Essential Oil of Fennel (Foeniculum vulgar Mill.

Directory of Open Access Journals (Sweden)

S Khoshpeyk

2017-03-01

emergence. The rest of irrigation was done every 5 days. The spacing between plants were 20 cm that was achieved by thinning plants in 3-4 leaves stage .Weeding was done manually tree times. Fennel harvesting was done in early September at the time of physiological maturity. At the first five plants harvested randomly from each plot for measurement of plant height, the number of lateral branches per plant, the number of umbels per plant, the number of seeds per umbel, the number of seeds per plant, weight of 1000 seed and fresh and dry weight of plant. Then for measurement of biomass, grain yield and harvest index, one m-2 of center of each plot was harvested. Seed and straw essence were measured using distillation method with distilled water by Clevenger apparatus. The data was analyzed using the SAS software. Means comparisons were done with Duncan’s multiple rang test at 5% probability. Results and Discussion Results showed that height, the number of lateral branches, the number of umbels per plants, the number of seeds per plant, 1000 seed weight, dry weight, seed yield, straw yield, biological yield, harvest index, and essence yield were affected by nano-organic manure. Nitrogen fertilizers had significant effect on height, the number of seeds per umbrella, the number of seeds per plant, plant fresh and dry weight, seed yield, straw yield, biological yield and essence yields while the number of lateral branches, umbels per plant, seed weight and harvest index was not affected by this factor. The interaction of nano- organic manure and nitrogen fertilizer had not significant effect on the measurement characteristics. While the application of 10 ton ha-1 of nano-organic manure or 25 kg ha-1 of nitrogen fertilizer could increase biological, seed, straw and essential oil yield, higher amount utilization values of each treatment had no effect .Consumption of 25 kg ha-1 of nitrogen fertilizer increased seed yield by increasing the biological yield, while 10 tons ha-1 nano

Reduced connectivity in the self-processing network of schizophrenia patients with poor insight.

Directory of Open Access Journals (Sweden)

Edith J Liemburg

Full Text Available Lack of insight (unawareness of illness is a common and clinically relevant feature of schizophrenia. Reduced levels of self-referential processing have been proposed as a mechanism underlying poor insight. The default mode network (DMN has been implicated as a key node in the circuit for self-referential processing. We hypothesized that during resting state the DMN network would show decreased connectivity in schizophrenia patients with poor insight compared to patients with good insight. Patients with schizophrenia were recruited from mental health care centers in the north of the Netherlands and categorized in groups having good insight (n= 25 or poor insight (n = 19. All subjects underwent a resting state fMRI scan. A healthy control group (n = 30 was used as a reference. Functional connectivity of the anterior and posterior part of the DMN, identified using Independent Component Analysis, was compared between groups. Patients with poor insight showed lower connectivity of the ACC within the anterior DMN component and precuneus within the posterior DMN component compared to patients with good insight. Connectivity between the anterior and posterior part of the DMN was lower in patients than controls, and qualitatively different between the good and poor insight patient groups. As predicted, subjects with poor insight in psychosis showed decreased connectivity in DMN regions implicated in self-referential processing, although this concerned only part of the network. This finding is compatible with theories implying a role of reduced self-referential processing as a mechanism contributing to poor insight.

Effects of Irrigation Levels on Growth Characteristics and Yield of Four Ecotypes of Sesame (Sesamum indicum L.

Directory of Open Access Journals (Sweden)

A Koocheki

2015-09-01

Full Text Available In order to study the effects of irrigation levels on growth criteria, yield components and seed yield of four ecotypes of sesame (Sesamum indicum L., a field experiment was conducted as factorial based on a randomized complete block design with three replications at the Agricultural Research Station, Ferdowsi University of Mashhad, during growing season 2010-2011. Three irrigation levels (2000, 3000 and 4000 m3 ha-1 and four ecotypes (Darab, Sabzevar, Kashmar and Kalat were allocated as treatments. Criteria such as leaf are index (LAI, dry matter (DM accumulation, yield components (branch number, capsule number, seed number and 1000-seed weight, biological yield and seed yield of sesame were measured, accordingly. Results indicated that the simple effects of irrigation levels and ecotypes were significant (p≤0.05 on yield and yield components of sesame. Interaction between irrigation levels and ecotypes for yield components, biological yield and seed yield were significant (p≤0.01. By increasing water level from 2000 to 4000 m3 ha-1 enhanced branch number, capsule number, seed number and 1000-seed weight up to 57, 55 and 36%, respectively. Seed yield of Kalat was higher than Darab, Sabzevar and Kashmar with 1, 7 and 11%, respectively. By enhancing irrigation from 2000 to 4000 m3.ha-1 seed yield of Darab, Sabzevar and Kashmar and Kalat increased with 15, 67T 62 and 34%, respectively. There was a positive and significant relationship between yield and yield components. The highest correlation coefficient was observed for 1000-seed weight (r=0.87**.

Allelopathic Effect of Wheat and Barley Residues on Yield and Yield Components of Cowpea (Vigna sinensis L. and Weeds Control

Directory of Open Access Journals (Sweden)

M Shahbyki

2018-02-01

Full Text Available Introduction Weeds are a major constraint limiting crop yield in agricultural systems and in organic systems in particular. Although herbicides are efficient for weed control, continuous use has caused the development of resistance in weeds against several herbicides. Furthermore, herbicides also pollute the soil, water and aerial environments and herbicide residues in food have deteriorated food quality and enhanced the risk of diseases. Allelopathy is defined as the direct or indirect harmful or beneficial effects of one plant on another through the release of chemical compounds into the environment. Wheat (Triticum aestivum L. is known to be allelopathic against crops and weeds. The objective of this study was to investigate the allelopathic effect of wheat and barley residues on weeds control and cowpea yield. Materials and Methods An experiment was conducted as randomized complete block design with three replications at the research field (36° 25’E, 54° 58’N, 1349 m a.s.l. of Agricultural Faculty, Shahrood University of Technology in 2015. Treatments were included; weeding all season, no weeding, trifluralin according to the recommended dose (2 ton ha-1, foliar application of wheat straw extract (concentration of 50%, foliar application of wheat straw extract (concentration of 100%, the application of wheat residue mixed with the soil at a rate of 2 ton ha-1, the application of wheat residue mixed with the soil at a rate of 4 ton ha-1, the application of wheat residue mixed with the soil at a rate of 8 ton ha-1, foliar application of barley straw extract (concentration of 50%, foliar application of barley straw extract (concentration of 100%. Statistical analysis of data was performed with MSTAT-C software and means were compared with LSD test at the 5% level of probability. Results and Discussion The results showed that the effect of treatments was significant (P 0.01 on weed density and dry weight. Soil incorporation with wheat

Temperature and precipitation effects on wheat yield across a European transect

DEFF Research Database (Denmark)

Pirttioja, N; Carter, T.; Fronzek, S

2015-01-01

his study explored the utility of the impact response surface (IRS) approach for investigating model ensemble crop yield responses under a large range of changes in climate. IRSs of spring and winter wheat Triticum aestivum yields were constructed from a 26-member ensemble of process-based crop s...... additional insights into sensitivities to inter-model and inter-annual variability. Taken together, these sensitivities may help to pinpoint processes such as heat stress, vernalisation or drought effects requiring refinement in future model development....

combining high seed number and weight to improve seed yield

African Journals Online (AJOL)

ACSS

ABSTRACT. Increasing seed size and seed weight is an important trait for trade, yield component and adaptation of chickpea ... determining yield or quality, and the development of rapid and ..... C.G. 1981. Control of seed growth in soybeans.

Yield performance of brassica varieties under rainfed condition

International Nuclear Information System (INIS)

Hassan, M.Z.U.; Wahla, A.J.; Waqar, M.Q.

2014-01-01

A field study was conducted to evaluate crop growth and seed yield performance of Brassica varieties under Rainfed conditions. The varieties, included in the study, were BSA, Zafar-2000, Pakola, Con.1, Con.2, Abaseen, Rainbow, SPS-5, Bard-1, and KJ-119. KJ-119 (2500.0 KG/HA) among Brassica juncea L. varieties and Abaseen (2425.9 kg/ha) among Brassica napusL. Varieties produced with maximum seed yield as compared to rest of varieties. Significantly, minimum seed yield was observed in check variety BSA. The significant difference in seed yield of Brassica varieties, Abaseen and KJ 119, was attributed to improve yield components over other varieties. Maximum pods per plant and seeds per pod led these varieties to attain maximum yield. Inspite of weather variations existence during years 2007-09,the same varieties produced with maximum seed yield. (author)

Determination of ontogenetic selection criteria for grain yield in ...

African Journals Online (AJOL)

STORAGESEVER

2009-06-03

Jun 3, 2009 ... spring barley in cool and short-season environments. Key words: ... Many researchers have used a linear correlation analysis ... of each yield component on grain yield from the indirect ... ANOVA was carried out using the SPSS statistics programme ..... stable characteristic in barley (Gallagher et al., 1975),.

Yield components and quality of intercropped cotton in response to mepiquat chloride and plant density

NARCIS (Netherlands)

Mao, Lili; Zhang, Lizhen; Evers, J.B.; Werf, van der Wopke; Liu, Shaodong; Zhang, Siping; Wang, Baomin; Li, Zhaohu

2015-01-01

Cotton yield is greatly improved by moderately increasing plant density and modifying the cotton plants to have a compact structure, which is also required by the increasing demand for mechanized harvest. However, in cotton strip intercropped with wheat, only limited knowledge on yield response

Insights from random vibration analyses using multiple earthquake components

International Nuclear Information System (INIS)

DebChaudhury, A.; Gasparini, D.A.

1981-01-01

The behavior of multi-degree-of-freedom systems subjected to multiple earthquake components is studied by the use of random vibration dynamic analyses. A linear system which has been decoupled into modes and has both translational and rotational degrees of freedom is analyzed. The seismic excitation is modelled as a correlated or uncorrelated, vector-valued, non-stationary random process having a Kanai-Tajimi type of frequency content. Non-stationarity is achieved by using a piece wise linear strength function. Therefore, almost any type of evolution and decay of an earthquake may be modelled. Also, in general, the components of the excitation have different frequency contents and strength functions; i.e. intensities and durations and the correlations between components can vary with time. A state-space, modal, random vibration approach is used. Exact analytical expressions for both the state transition matrix and the evolutionary modal covariance matrix are utilized to compute time histories of modal RMS responses. Desired responses are then computed by modal superposition. Specifically, relative displacement, relative velocity and absolute acceleration responses are studied. An important advantage of such analyses is that RMS responses vary smoothly in time therefore large time intervals may be used to generate response time histories. The modal superposition is exact; that is, all cross correlation terms between modal responses are included. (orig./RW)

The development of component-based information systems

CERN Document Server

Cesare, Sergio de; Macredie, Robert

2015-01-01

This work provides a comprehensive overview of research and practical issues relating to component-based development information systems (CBIS). Spanning the organizational, developmental, and technical aspects of the subject, the original research included here provides fresh insights into successful CBIS technology and application. Part I covers component-based development methodologies and system architectures. Part II analyzes different aspects of managing component-based development. Part III investigates component-based development versus commercial off-the-shelf products (COTS), includi

Evaluation of Two Mycorrhiza Species and Nitroxin on Yield and Yield Components of Garlic (Allium sativum L. in an Ecological Agroecosystem

Directory of Open Access Journals (Sweden)

P Rezvani Moghaddam

2016-02-01

biofertilizers on different crops, information on the effects of these factors for many medicinal plants such as garlic is scarce; therefore, in this study the effects of mycorrhiza and biofertilizers on quantitative characteristics of garlic in a low input cropping system were studied. Materials and Methods In order to study the effects of two mycorrhiza species and nitroxin on yield and yield components of garlic (Allium sativum L., an experiment was conducted in a factorial arrangement based on a randomized completed block design with three replications in the growing seasons of 2010 at the experimental farm of College of Agriculture, Ferdowsi University of Mashhad, Iran. The experimental factors were all combination of two mycorrhiza species (Glomus mosseae, Glomus intraradices and control and also inoculation with and without nitroxin (include Azotobacter sp. and Azospirillum sp. as a biofertilizer. Results and Discussion The results showed that both two mycorrhiza species had superior effects on most of the study traits compared with control. Bulb weight per plant was significantly affected by mycorrhiza species. Glomus mosseae، and Glomus intraradices increased bulb weight per plant by 48 and 29 percent compared with control, respectively. Nitroxin had a significant effect on length and diameter of bulbs. Length and diameter of bulbs were increased by 13 and 8 percent using nitroxin compared with control, respectively. Interactive effects of mycorrhiza and nitroxin on all study traits also were significant. Interactive effects of study treatments showed that Glomus mosseae had better effect on most of study traits at with and without nitroxin treatments. On the other hand, nitroxin had synergistic effect on mycorrhiza treatments compared when these treatments were used without nitroxin. Highest (4306 kg ha-1 and lowest (1665 kg ha-1 economic yield (bulb yield were obtained from Glomus mosseae + Nitroxin and control (without mycorhiza and nitroxin, respectively. In

Influence of pressure on pyrolysis of black liquor: 2. Char yields and component release.

Science.gov (United States)

Whitty, Kevin; Kullberg, Mika; Sorvari, Vesa; Backman, Rainer; Hupa, Mikko

2008-02-01

This is the second in a series of papers concerning the behavior of black liquor during pyrolysis at elevated pressures. Two industrial black liquors were pyrolyzed under pressurized conditions in two laboratory-scale devices, a pressurized single-particle reactor and a pressurized grid heater. Temperatures ranging between 650 and 1100 degrees C and pressures in the range 1-20 bar were studied. Char yields were calculated and based on analysis of some of the chars the fate of carbon, sodium, potassium and sulfur was determined as a function of pyrolysis pressure. At temperatures below 800 degrees C little variation in char yield was observed at different pressures. At higher temperatures char yield increased with pressure due to slower decomposition of sodium carbonate. For the same reason, sodium release decreased with pressure. Sulfur release, however, increased with pressure primarily because there was less opportunity for its capture in the less-swollen chars.

Evaluation of the Effect of Agroforestry and Conventional System on Yield and Yield Components of Barley Hordeum vulgare L. (and Wheat Triticum

Directory of Open Access Journals (Sweden)

monir nazari

2017-09-01

Full Text Available Introduction: Low sustainability, soil erosion and loss of soil fertility in conventional systems are the major threats to the agricultural production systems. These threats leads researchers towards more attention to different agroforestry systems including alley cropping as a solution in different regions of the world. Agroforestry has attracted considerable attentions because of its potential to maintain or increase productivity in areas with high energy input in which large scale agricultural systems are impractical. It is often assumed that appropriate agroforestry systems can provide the essential ecological functions needed to ensure sustainability and maintain microclimatic and other favorable influences, and that such benefits may outweigh their enhanced use of water in areas of limited water availability. Evidences suggest that diversity in agroecosystems, in particular the integration of different perennial crops or trees (agroforestry, augments nutrient capture and cycling processes; processes that in turn lead to reduced reliance on nutrient or water inputs, abatement of air and water pollution, and enhancement of other ecosystem services across multiple spatial and temporal scales. Agroforestry is viewed as providing ecosystem services, has many environmental benefits and economic advantages as part of a multifunctional agroecosystem. Conventional cultivation of barley and wheat systems in Saman Region has many problems about sustainability of production, erosion of soil, yield stability and soil nutrient properties. On the other hand, planting of Almond is a good option for farmers to make orchards, in compare to Nut. Although some farmers do Agroforestry as an innovative practice, but studying the advantages of these systems and finding their rewards, because of its unique benefits in dry, poor and endangered areas, could help farmers to increase their cultivation area as they wish, particularly in Saman region. Materials and

Effect of cotton leaf-curl virus on the yield-components and fibre properties of cotton genotypes under varying plant spacing and nitrogen fertilizer

International Nuclear Information System (INIS)

Ahmad, S.; Hayat, K.; Ashraf, F.; Sadiq, M.A.

2008-01-01

Cotton leaf-curl virus (CLCu VB. Wala strain) is one of the major biotic constraints of cotton production in Punjab. Development of resistant cotton genotype is the most feasible, economical and effective method to combat this hazardous problem, but so far no resistant genotype has been reported. Therefore, the objective of this study was to compare yield and yield-components and fiber traits of different genotypes/varieties under different plant spacing and nitrogen fertilizer as a management strategy to cope with this viral disease. Field experiment was conducted during 2006-07 to evaluate the effect of genotype, plant spacing and nitrogen fertilizer on cotton. Five genotypes (MNH-786, MNH-789, MNH- 6070, CIM- 496, and BH-160), three plant-spacings (15, 30 and 45 cm) and three nitrogen fertilizer-levels (6.5, 8.6 and 11 bags Urea / ha) were studied. Results showed that significant differences exist for plant height, no. of bolls/m/sup -2/, seed-cotton yield (kg/ha) due to genotype, interaction of genotype with plant spacing and nitrogen fertilizer level. Whereas boll weight, ginning out-turn, staple length and fiber fineness were not affected significantly by the plant spacing and nitrogen fertilizer, the effect due to genotype was significant for these traits. CLCuV infestation varied significantly with genotypes, while all other factors, i.e., plant spacing and nitrogen fertilizers, have non-significant effect. As the major objective of cotton cultivation is production of lint for the country and seed- cotton yield for the farmers, it is noted that genotypes grown in narrow plant-spacing (15 cm) and higher nitrogen fertilizer level (11.0 bags of urea/ha) produced maximum seed-cotton yield under higher CLCu V infestation in case of CIM-496, MNH-789 and BH-I60, while the new strain MNH-6070 gave maximum yield under 30cm plant-spacing and 8.6 bags of urea/ha has the 2.3% CLCu V infestation was observed in this variety. From the present study, it is concluded that

Oligodendrocyte differentiation and implantation : new insights for remyelinating cell therapy

NARCIS (Netherlands)

Sher, Falak; Balasubramaniyan, Veerakumar; Boddeke, Erik; Copray, Sjef

2008-01-01

Purpose of review Recent research on oligodendrocyte development has yielded new insights on the involvement of morphogens and differentiation factors in oligodendrogenesis. This knowledge has improved strategies to control neural stem cell-derived oligodendrocyte differentiation and functional

Third-person Diagnostic Interview on the Cognitive Insight Level of Psychotic Patients with an Insight at the Denial Level.

Science.gov (United States)

Mehdizadeh, Mahsa; Rezaei, Omid

2016-01-01

According to the previous findings, the third-person technique improved the clinical insight of psychotic patients, therefore the present study aims to examine the effect of a third-person interview compared to a first-person interview on the level of cognitive insight of psychotic patients with an insight at the denial level. In this study, using interviews and questionnaires, a total number of 44 patients of Razi Psychiatric Educational and Treatment Center with an insight at the denial level being assessed using diagnostic interviews were divided randomly into two groups. Then, the two groups of patients' cognitive insights were evaluated using Beck Cognitive Insight Scale. The findings indicated that in psychotic patients with an insight at the denial level, the third-person technique of interview compared to the first-person had little effect on the improvement of overall cognitive insight and its components, including self-reflection and self-assurance; however, this effect was not strong enough to make a significant difference between the two groups of patients. According to the study findings, we can conclude that the third-person interview compared to the first-person interview has no effect on the improvement of the cognitive insight of psychotic patients with an insight at the denial level. This finding is consistent with the previous studies indicating that although the theory of mind has some correlations with the clinical insight of patients, it has no effect on their cognitive insight.

Genetic analysis and QTL mapping of maize yield and associate ...

African Journals Online (AJOL)

STORAGESEVER

2008-06-17

Jun 17, 2008 ... strongly influenced by both genotype and environment, and the interaction of ... associated with yield components as well as secondary ... QTLs that control grain yield under drought ... statistical analysis (ANOVA etc) of phenotypic traits was carried out .... which means that the loci had stable heredity.

Heritability, variance components and genetic advance of some ...

African Journals Online (AJOL)

Heritability, variance components and genetic advance of some yield and yield related traits in Ethiopian ... African Journal of Biotechnology ... randomized complete block design at Adet Agricultural Research Station in 2008 cropping season.

Studies on the Whipping Characteristics and Yield of Dehydrated ...

African Journals Online (AJOL)

The objective of this research was to evaluate the yield and whipping characteristics of dehydrated egg so as to establish the optimum conditions for commercial applications of powdered egg. Eggs were cracked, separated into their components by gravity. Each of the egg components (egg yolk, albumin, whole liquid egg) ...

Effects of sulfur dioxide on nitrogen fixation, carbon partitioning, and yield components in snapbean

International Nuclear Information System (INIS)

Griffith, S.M.; Campbell, W.F.

1987-01-01

The air pollutant SO 2 is known to affect plant biochemistry and physiology, although very little is known about its effects on N 2 -fixation in legumes. This study sought to determine if N 2 -fixation, C partitioning, and plant productivity of snapbean (Phaseolus vulgaris L.) were affected under short-term, low-level SO 2 exposures. Plants were exposed, 29 d after planting (7 d before anthesis), to 0, 18, and 36 μmol SO 2 m -3 for 4 h d -1 for 5 d in a fumigation chamber. On the last day of SO 2 treatment, plants were also exposed to 14 CO 2 to determine changes in C partitioning patterns. At these concentrations, there was no visible damage to plant tissue and no significant changes in dry weight or yield components. Only the 36 μmol SO 2 m -3 treatment reduced C 2 H 2 reduction rates, but recovery to near control rates occurred within 24 h after SO 2 removal. Leaves of plants treated with 18 μmol SO 2 m -3 exported more of their total assimilated 14 C than control plants, while those treated with 36 μmol SO 2 m -3 retained greater amounts. Retention of 14 C at the 36 μmol SO 2 m -3 level may account for the inhibition of C 2 H 2 -reduction because of less photosynthate arriving at the root nodules. These data suggest that SO 2 levels that do not cause visible injury may interfere with C metabolism and transport in snapbean

Decomposing global crop yield variability

Science.gov (United States)

Ben-Ari, Tamara; Makowski, David

2014-11-01

Recent food crises have highlighted the need to better understand the between-year variability of agricultural production. Although increasing future production seems necessary, the globalization of commodity markets suggests that the food system would also benefit from enhanced supplies stability through a reduction in the year-to-year variability. Here, we develop an analytical expression decomposing global crop yield interannual variability into three informative components that quantify how evenly are croplands distributed in the world, the proportion of cultivated areas allocated to regions of above or below average variability and the covariation between yields in distinct world regions. This decomposition is used to identify drivers of interannual yield variations for four major crops (i.e., maize, rice, soybean and wheat) over the period 1961-2012. We show that maize production is fairly spread but marked by one prominent region with high levels of crop yield interannual variability (which encompasses the North American corn belt in the USA, and Canada). In contrast, global rice yields have a small variability because, although spatially concentrated, much of the production is located in regions of below-average variability (i.e., South, Eastern and South Eastern Asia). Because of these contrasted land use allocations, an even cultivated land distribution across regions would reduce global maize yield variance, but increase the variance of global yield rice. Intermediate results are obtained for soybean and wheat for which croplands are mainly located in regions with close-to-average variability. At the scale of large world regions, we find that covariances of regional yields have a negligible contribution to global yield variance. The proposed decomposition could be applied at any spatial and time scales, including the yearly time step. By addressing global crop production stability (or lack thereof) our results contribute to the understanding of a key

Influence of shoot topping on yield and quality of Vitis vinifera L.

African Journals Online (AJOL)

STORAGESEVER

2008-10-20

Oct 20, 2008 ... Key words: Vitis vinifera L., shoot topping, yield, quality, canopy management, shoot topping, fruit set, yield components, fruit .... Sensory characteristics were under the interaction effect of year and topping level. Berry weight was influenced separately by the year and topping (Table 2 and 3). Yield per vine ...

Enriching an intraspecific genetic map and identifying QTL for fiber quality and yield component traits across multiple environments in Upland cotton (Gossypium hirsutum L.).

Science.gov (United States)

Liu, Xueying; Teng, Zhonghua; Wang, Jinxia; Wu, Tiantian; Zhang, Zhiqin; Deng, Xianping; Fang, Xiaomei; Tan, Zhaoyun; Ali, Iftikhar; Liu, Dexin; Zhang, Jian; Liu, Dajun; Liu, Fang; Zhang, Zhengsheng

2017-12-01

Cotton is a significant commercial crop that plays an indispensable role in many domains. Constructing high-density genetic maps and identifying stable quantitative trait locus (QTL) controlling agronomic traits are necessary prerequisites for marker-assisted selection (MAS). A total of 14,899 SSR primer pairs designed from the genome sequence of G. raimondii were screened for polymorphic markers between mapping parents CCRI 35 and Yumian 1, and 712 SSR markers showing polymorphism were used to genotype 180 lines from a (CCRI 35 × Yumian 1) recombinant inbred line (RIL) population. Genetic linkage analysis was conducted on 726 loci obtained from the 712 polymorphic SSR markers, along with 1379 SSR loci obtained in our previous study, and a high-density genetic map with 2051 loci was constructed, which spanned 3508.29 cM with an average distance of 1.71 cM between adjacent markers. Marker orders on the linkage map are highly consistent with the corresponding physical orders on a G. hirsutum genome sequence. Based on fiber quality and yield component trait data collected from six environments, 113 QTLs were identified through two analytical methods. Among these 113 QTLs, 50 were considered stable (detected in multiple environments or for which phenotypic variance explained by additive effect was greater than environment effect), and 18 of these 50 were identified with stability by both methods. These 18 QTLs, including eleven for fiber quality and seven for yield component traits, could be priorities for MAS.

Groundwater recharge and flow on Montserrat, West Indies: Insights from groundwater dating

Directory of Open Access Journals (Sweden)

Brioch Hemmings

2015-09-01

New hydrological insights: δ2H and δ18O analysis indicates uniform recharge elevations for groundwaters on Montserrat. CFC-11 and CFC-12 analysis reveals age differences between isotopically similar, high elevation springs and low elevation aquifer waters. Low CFC concentrations within a confined low elevation aquifer suggest water ages of ∼45 years. High CFC concentrations in the northern and western springs are explained by rapid infiltration of cool (high CFC concentration rainfall into saturated compartments, with flow through the vadose zone to the phreatic zone dominated by compartment flow. Lower CFC concentrations in a number of aligned warmer springs suggest a contribution from older, warmer waters from depth. Temperatures and CFC concentrations indicate older component supply rates of up to 8 L/s to the highest yielding spring on Centre Hills, with contributions of up to 75% in the warmest spring waters.

Evaluation of Induced Mutants Using Irradiation and Chemical Mutagen in Lupin (Lupinus albus L.) for Earliness and Yield and Its Components

International Nuclear Information System (INIS)

Ragsb, A.I.; Boshra, S. A.; Mehany, A. L.; Darwish, A. A.; Khattab, M. M.

2007-01-01

This study was conducted in 2001 / 2002, 2002 /2003 and 2003/ 2004 seasons at the Experimental Farm of Nuclear Res. Center, Inshas. The objectives were to evaluate 23 induced mutants with gamma rays and EMS and two local cultivars Giza 1 and Giza 2 in the three generations (M3, M4, and M5) for earliness and seed yield and its components. The results were: It was found that earliness was observed for mutants 5, 11, 17, 21 and 22 as compared with Giza 1 and Giza 2 in the three generations with a maximum value of 19 days earlier than Giza 2. Highly significant increase for number of pods / plant was found for mutants 8, 15 and 19 as compared with the two local cultivars in the three generations. A considerable increase for no of seeds/plant was noticed only for mutant lines 8 and 15 as compared with the two local cultivars. A remarkable increase for seed index was only found for mutant lines 6, 12 and 21 as compared with the two local cultivars in the three generations. A considerable increase for seed yield / plant was revealed for mutant lines 1, 4, 7, 8, 15 and 19 as compared with the two local cultivars in the three generations.

Predicting Great Lakes fish yields: tools and constraints

Science.gov (United States)

Lewis, C.A.; Schupp, D.H.; Taylor, W.W.; Collins, J.J.; Hatch, Richard W.

1987-01-01

Prediction of yield is a critical component of fisheries management. The development of sound yield prediction methodology and the application of the results of yield prediction are central to the evolution of strategies to achieve stated goals for Great Lakes fisheries and to the measurement of progress toward those goals. Despite general availability of species yield models, yield prediction for many Great Lakes fisheries has been poor due to the instability of the fish communities and the inadequacy of available data. A host of biological, institutional, and societal factors constrain both the development of sound predictions and their application to management. Improved predictive capability requires increased stability of Great Lakes fisheries through rehabilitation of well-integrated communities, improvement of data collection, data standardization and information-sharing mechanisms, and further development of the methodology for yield prediction. Most important is the creation of a better-informed public that will in turn establish the political will to do what is required.

Effect of maltose and trehalose on growth, yield and some biochemical components of wheat plant under water stress

Directory of Open Access Journals (Sweden)

Hemmat A. Ibrahim

2016-12-01

Full Text Available In the greenhouse experiment, wheat plants (Triticum aestivum L. cv. Giza 168 were treated with 10 mM of maltose and trehalose as foliar spray using Tween 20 as wetting agent at 15, 30 and 45 days post sowing with two times of irrigation at 10 and 20 days intervals. Two samples were taken after 45 and 120 days from planting. At the first sample date, plant height, shoot fresh and dry weights and leaf area were recorded. At harvesting time (the second sample no. of spikes/plant, no. of spikelets/plant and weight of 1000 grains were taken. Chemical analyses were conducted in leaves at the first sample date for determination of phenolic compounds, flavonoids, amino acids, reducing sugars, total soluble sugars, protein, proline, PAL, POD, ascorbate peroxidase, catalase, PPO and MDA. The obtained results indicated that maltose and trehalose had significant and positive effect on most growth parameters. Opposite trend was found in plant height, no. of spike/plant and weight of 1000 grains by drought treatment. Maltose and trehalose treatments enhanced in the most biochemical components whereas they decreased PAL and catalase activity. Variable trends in amino acids and ascorbate peroxidase were observed by drought. However, the drought has more stimulative effect in most cases than the first time period of irrigation. The results concluded that foliar applications with maltose or trehalose induced water stress tolerance in wheat plants. Maltose treatment gave the best results in most morphological parameters, grains yield and biochemical components than trehalose treatment.

Overlap and distinction between measures of insight and self-stigma.

Science.gov (United States)

Hasson-Ohayon, Ilanit

2018-05-24

Multiple studies on insight into one's illness and self-stigma among patients with serious mental illness and their relatives have shown that these constructs are related to one another and that they affect outcome. However, a critical exploration of the items used to assess both constructs raises questions with regard to the possible overlapping and centrality of items. The current study used five different samples to explore the possible overlap and distinction between insight and self-stigma, and to identify central items, via network analyses and principal component factor analysis. Findings from the network analyses showed overlap between insight and self-stigma exist with a relatively clearer observational distinction between the constructs among the two parent samples in comparison to the patient samples. Principal component factor analysis constrained to two factors showed that a relatively high percentage of items were not loaded on either factor, and in a few datasets, several insight items were loaded on the self-stigma scale and vice versa. The author discusses implications for research and calls for rethinking the way insight is assessed. Clinical implications are also discussed in reference to central items of social isolation, future worries and stereotype endorsement among the different study groups. Copyright © 2018 Elsevier B.V. All rights reserved.

Limonene ozonolysis in the presence of nitric oxide: Gas-phase reaction products and yields

Science.gov (United States)

Ham, Jason E.; Harrison, Joel C.; Jackson, Stephen R.; Wells, J. R.

2016-05-01

The reaction products from limonene ozonolysis were investigated using the new carbonyl derivatization agent, O-tert-butylhydroxylamine hydrochloride (TBOX). With ozone (O3) as the limiting reagent, five carbonyl compounds were detected. The yields of the carbonyl compounds are discussed with and without the presence of a hydroxyl radical (OHrad) scavenger, giving insight into the influence secondary OH radicals have on limonene ozonolysis products. The observed reaction product yields for limonaketone (LimaKet), 7-hydroxyl-6-oxo-3-(prop-1-en-2-yl)heptanal (7H6O), and 2-acetyl-5-oxohexanal (2A5O) were unchanged suggesting OHrad generated by the limonene + O3 reaction does not contribute to their formation. The molar yields of 3-isopropenyl-6-oxo-heptanal (IPOH) and 3-acetyl-6-oxoheptanal (3A6O) decreased by 68% and >95%; respectively, when OHrad was removed. This suggests that OHrad radicals significantly impact the formation of these products. Nitric oxide (NO) did not significantly affect the molar yields of limonaketone or IPOH. However, NO (20 ppb) considerably decreased the molar reaction product yields of 7H6O (62%), 2A5O (63%), and 3A6O (47%), suggesting NO reacted with peroxyl intermediates, generated during limonene ozonolysis, to form other carbonyls (not detected) or organic nitrates. These studies give insight into the transformation of limonene and its reaction products that can lead to indoor exposures.

The effect of application of chemical and organic fertilizers on yield and yield components of sesame (Sesamum indicum L. in different plant densities

Directory of Open Access Journals (Sweden)

P. Rezvani Moghaddam

2016-04-01

Full Text Available In order to understand the effect of plant density and different fertilizers on sesame (Sesamum indicum L. production, an experiment was conducted as a factorial arrangement based on completely randomized block design with three replications. The experimental treatments were fertilizers in four levels (cow manure (30 t.ha-1, municipal compost (30 t.ha-1, chemical fertilizer (250 kg ammonium phosphate + 100 kg urea and control (no-fertilizer and plant density in four levels (20, 30, 40 and 50 plant.m-2. The results showed that all treatments increased the plant height, number of capsule per plant, plant biomass, seed yield, seed weight and number of seed per plant compared to control, significantly. The highest amount of the traits was obtained in manure treatment. The seed yield was increased by increasing plant density, but decreased the plant height, number of capsule per plant, plant biomass, seed yield and weight and number of seed per plant, significantly. 1000-seed weight, harvest index and weight of seed per capsule had no affected by treatments. Our result indicated that the density of 40 plant.m-2 among using manure was the most appropriate of cropping pattern in our experiment.

Fluorescence Quantum Yield Measurements of Fluorescent Proteins: A Laboratory Experiment for a Biochemistry or Molecular Biophysics Laboratory Course

Science.gov (United States)

Wall, Kathryn P.; Dillon, Rebecca; Knowles, Michelle K.

2015-01-01

Fluorescent proteins are commonly used in cell biology to assess where proteins are within a cell as a function of time and provide insight into intracellular protein function. However, the usefulness of a fluorescent protein depends directly on the quantum yield. The quantum yield relates the efficiency at which a fluorescent molecule converts…

Semantic evaluations of noise with tonal components in Japan, France, and Germany: a cross-cultural comparison.

Science.gov (United States)

Hansen, Hans; Weber, Reinhard

2009-02-01

An evaluation of tonal components in noise using a semantic differential approach yields several perceptual and connotative factors. This study investigates the effect of culture on these factors with the aid of equivalent listening tests carried out in Japan (n=20), France (n=23), and Germany (n=20). The data's equivalence level is determined by a bias analysis. This analysis gives insight in the cross-cultural validity of the scales used for sound character determination. Three factors were extracted by factor analysis in all cultural subsamples: pleasant, metallic, and power. By employing appropriate target rotations of the factor spaces, the rotated factors were compared and they yield high similarities between the different cultural subsamples. To check cross-cultural differences in means, an item bias analysis was conducted. The a priori assumption of unbiased scales is rejected; the differences obtained are partially linked to bias effects. Acoustical sound descriptors were additionally tested for the semantic dimensions. The high agreement in judgments between the different cultural subsamples contrast the moderate success of the signal parameters to describe the dimensions.

Effect of moisture stress and low phosphorus on yield of some ...

African Journals Online (AJOL)

Soybean genotypes belonging to different maturity periods were planted under normal, nutrient (P) and moisture stress conditions in a combined design with three replications. The objective was to determine the effect of phosphorus and moisture stress on yield and yield components of soybean in order to select varieties ...

Yields and protein content of two cowpea varieties grown under ...

African Journals Online (AJOL)

Sole cowpea and sweet corn treatments were included and all treatments replicated four times. Fully expanded cowpea leaves on all cowpea plants in the two middle rows were harvested once at seven weeks after seed sowing prior to flowering. Growth and yield component data were collected from component crops while ...

Using Low Resolution Satellite Imagery for Yield Prediction and Yield Anomaly Detection

Directory of Open Access Journals (Sweden)

Oscar Rojas

2013-04-01

Full Text Available Low resolution satellite imagery has been extensively used for crop monitoring and yield forecasting for over 30 years and plays an important role in a growing number of operational systems. The combination of their high temporal frequency with their extended geographical coverage generally associated with low costs per area unit makes these images a convenient choice at both national and regional scales. Several qualitative and quantitative approaches can be clearly distinguished, going from the use of low resolution satellite imagery as the main predictor of final crop yield to complex crop growth models where remote sensing-derived indicators play different roles, depending on the nature of the model and on the availability of data measured on the ground. Vegetation performance anomaly detection with low resolution images continues to be a fundamental component of early warning and drought monitoring systems at the regional scale. For applications at more detailed scales, the limitations created by the mixed nature of low resolution pixels are being progressively reduced by the higher resolution offered by new sensors, while the continuity of existing systems remains crucial for ensuring the availability of long time series as needed by the majority of the yield prediction methods used today.

Effects of Foliar Applications of Sulfur, Nitrogen and Phosphorus on Castor Bean (Ricinus cmmunis L. Seed Yield and its Components under Water Deficit Conditions

Directory of Open Access Journals (Sweden)

M. Mosavi

2015-08-01

Full Text Available To determine the effects of foliar applications of some macroelements on castor seed yield and its components under drought stress conditions, an experiment was conducted at the Agricultural Research Center of East Azerbaijan province. A factorial experiment, based on randomized complete block design with three replications, was carried out during 2013 growing season. Treatment factors consisted of irrigations with two levels (no water deficit and water deficit during grain filling stage and of foliar applications of macroelements with four levels [control, wettable sulfur (0.2 percent, nitrogen (urea: 0.6 percent and phosphor (super phosphate triple: 0.4 percent. Traits studied were: plant height, number of inflorescence, number of lateral branches, number of leaves, leaf temperature, relative water content, number of seeds per plant, 1000-kernal weight and seed yield. All traits, except number of inflorescence, were affected significantly by drought stress. Water deficit reduced plant height, number of leaves, number of seeds per plant, 1000-kernal weight, seed yield, relative water content, while it increased leaf temperature. Number of lateral branches was affected significantly by interaction between factors. Maximum latral branches (1.86 were obtained under non-stress treatment with nitrogen foliar application. Moderate drought stress had significant effect on leaf temperature and relative water content. It seems that, these traits can be used in determination of water deficit effects on castor bean.

Mineral carbonation: energy costs of pretreatment options and insights gained from flow loop reaction studies

Energy Technology Data Exchange (ETDEWEB)

Penner, Larry R.; O' Connor, William K.; Dahlin, David C.; Gerdemann, Stephen J.; Rush, Gilbert E.

2004-01-01

Sequestration of carbon as a stable mineral carbonate has been proposed to mitigate environmental concerns that carbon dioxide may with time escape from its sequestered matrix using alternative sequestration technologies. A method has been developed to prepare stable carbonate products by reacting CO2 with magnesium silicate minerals in aqueous bicarbonate/chloride media at high temperature and pressure. Because this approach is inherently expensive due to slow reaction rates and high capital costs, studies were conducted to improve the reaction rates through mineral pretreatment steps and to cut expenses through improved reactor technology. An overview is given for the estimated cost of the process including sensitivity to grinding and heating as pretreatment options for several mineral feedstocks. The energy costs are evaluated for each pretreatment in terms of net carbon avoided. New studies with a high-temperature, high-pressure flow-loop reactor have yielded information on overcoming kinetic barriers experienced with processing in stirred autoclave reactors. Repeated tests with the flow-loop reactor have yielded insights on wear and failure of system components, on challenges to maintain and measure flow, and for better understanding of the reaction mechanism.

Mineral carbonation: energy costs of pretreatment options and insights gained from flow loop reaction studies

International Nuclear Information System (INIS)

Penner, Larry R.; O'Connor, William K.; Dahlin, David C.; Gerdemann, Stephen J.; Rush, Gilbert E.

2004-01-01

Sequestration of carbon as a stable mineral carbonate has been proposed to mitigate environmental concerns that carbon dioxide may with time escape from its sequestered matrix using alternative sequestration technologies. A method has been developed to prepare stable carbonate products by reacting CO2 with magnesium silicate minerals in aqueous bicarbonate/chloride media at high temperature and pressure. Because this approach is inherently expensive due to slow reaction rates and high capital costs, studies were conducted to improve the reaction rates through mineral pretreatment steps and to cut expenses through improved reactor technology. An overview is given for the estimated cost of the process including sensitivity to grinding and heating as pretreatment options for several mineral feedstocks. The energy costs are evaluated for each pretreatment in terms of net carbon avoided. New studies with a high-temperature, high-pressure flow-loop reactor have yielded information on overcoming kinetic barriers experienced with processing in stirred autoclave reactors. Repeated tests with the flow-loop reactor have yielded insights on wear and failure of system components, on challenges to maintain and measure flow, and for better understanding of the reaction mechanism

Enabling new capabilities and insights from quantum chemistry by using component architectures

International Nuclear Information System (INIS)

Janssen, C L; Kenny, J P; Nielsen, I M B; Krishnan, M; Gurumoorthi, V; Valeev, E F; Windus, T L

2006-01-01

Steady performance gains in computing power, as well as improvements in Scientific computing algorithms, are making possible the study of coupled physical phenomena of great extent and complexity. The software required for such studies is also very complex and requires contributions from experts in multiple disciplines. We have investigated the use of the Common Component Architecture (CCA) as a mechanism to tackle some of the resulting software engineering challenges in quantum chemistry, focusing on three specific application areas. In our first application, we have developed interfaces permitting solvers and quantum chemistry packages to be readily exchanged. This enables our quantum chemistry packages to be used with alternative solvers developed by specialists, remedying deficiencies we discovered in the native solvers provided in each of the quantum chemistry packages. The second application involves development of a set of components designed to improve utilization of parallel machines by allowing multiple components to execute concurrently on subsets of the available processors. This was found to give substantial improvements in parallel scalability. Our final application is a set of components permitting different quantum chemistry packages to interchange intermediate data. These components enabled the investigation of promising new methods for obtaining accurate thermochemical data for reactions involving heavy elements

Phosphate fertilizer and weed control effects on growth and yield of ...

African Journals Online (AJOL)

Soil acidity and the associated low phosphorus availability and poor crop management practices are among the major factors constraining field pea productivity in the highlands of Ethiopia. The effect of phosphate fertilizer and weed control on yield and yield components of field pea (Pisum sativum L.) were studied on ...

Effects of drought stress condition on the yield of spring wheat ...

African Journals Online (AJOL)

use

2011-12-14

Dec 14, 2011 ... spikelets to booting stage affected the yield and yield components. Water deficit at this stage considerably decreased the number of spikelets per spike. The spike length reportedly showed stability under different conditions. However, the findings of Iqbal et al. (1999) on durum wheat indicated that the ...

Effects of sowing date on the growth and yield of maize cultivars ...

African Journals Online (AJOL)

a

Full Length Research Paper. Effects of sowing date on the ... days (GDD) and was the highest for seed yield and all yield components. The plant sown on 5th ... volume and weight), while plant development refers to processes related to cell ...

Influence of top dressing on yield and seed quality components of oilseed rape

Directory of Open Access Journals (Sweden)

Vujaković Milka

2010-01-01

Full Text Available Oilseed rape is an agronomically important species grown for seed that contains 40-48% oil and 18-25% proteins. Oilseed rape has high demands for nitrogen. The research was performed on four varieties of oilseed rape (Banaćanka, Valeska, Slavica and Express developed at Institute of Field and Vegetable Crops in Novi Sad, during vegetative seasons 2007-2008 and 2008-2009. During vegetation, top dressing was applied with different amounts of KAN: control (0 kg N ha-1, 50 kg N ha-1, 100 kg N ha-1, 150 kg N ha-1 and the N quantity determination were performed applying the balancing method (also known as N-min method. Yield, 1000-seed weight, seed germination, oil and protein content were determined after harvest. Yield and seed germination depended on seed production year. 1000-seed weight depended on seed production year and genotype. Oil and protein content in seed depended on production year, genotype and amount of the N-fertilizer applied by top dressing.

Determination of Yield and Yield Components as a Second Crop of Some Sesame Genotypes Collected from Şanlıurfa Region

Directory of Open Access Journals (Sweden)

Hüseyin ARSLAN

2014-09-01

Full Text Available This research, was carried out to determine the performance of some sesame (Sesamum indicum L. lines/genotype (15 and Arslanbey, Özberk-82, Muganlı-57, Gölmarmara and Baydar-2001 standard varieties in the Southeastern Anatolia Region. The studies were conducted at two locations (GAP Agricultural Research Institute-Gündaş Research Station and Talat Demirören Research Station during the growing season in 2010 (13 lines/genotype and 2011 (15 lines/genotype. Trials randomized complete block design as three replications. Plots length were 6 m, each plot formed 4 rows, row spacing was 70 cm and row distance was 15 cm. In the experiments was taken plant height, number of lateral branches per plant, number of capsules per plant, seed yield and 1000-grain weight as the herbal properties of the observations. According to research results; Arslanbey sesame variety with amounts ranging from 1112 kg ha-1 to 548 kg ha- 1 seed yield, in Şanlıurfa climate and soil conditions as the second product compared to other prominent varieties and lines is easily recommended.

Yield stability analysis of pearl millet hybrids in Nigeria

African Journals Online (AJOL)

hope&shola

2006-02-02

.] was ... Genotype x environment interaction was observed, a large component of which was accounted ... The importance of evaluating many potential genotypes .... Pooled analysis of variance for stability of grain yield (t/ha).

Ranking of risk significant components for the Davis-Besse Component Cooling Water System

International Nuclear Information System (INIS)

Seniuk, P.J.

1994-01-01

Utilities that run nuclear power plants are responsible for testing pumps and valves, as specified by the American Society of Mechanical Engineers (ASME) that are required for safe shutdown, mitigating the consequences of an accident, and maintaining the plant in a safe condition. These inservice components are tested according to ASME Codes, either the earlier requirements of the ASME Boiler and Pressure Vessel Code, Section XI, or the more recent requirements of the ASME Operation and Maintenance Code, Section IST. These codes dictate test techniques and frequencies regardless of the component failure rate or significance of failure consequences. A probabilistic risk assessment or probabilistic safety assessment may be used to evaluate the component importance for inservice test (IST) risk ranking, which is a combination of failure rate and failure consequences. Resources for component testing during the normal quarterly verification test or postmaintenance test are expensive. Normal quarterly testing may cause component unavailability. Outage testing may increase outage cost with no real benefit. This paper identifies the importance ranking of risk significant components in the Davis-Besse component cooling water system. Identifying the ranking of these risk significant IST components adds technical insight for developing the appropriate test technique and test frequency

The Effect of Rain-Fed and Supplementary Irrigation on the Yield ...

African Journals Online (AJOL)

The effect of rain-fed with rain-fed supplementary irrigation on yield and yield components of Maize (Zea mays L.) was carried out at Mekelle University main campus under Tigray region in Ethiopia. The experiment was laid out in a Randomized Complete Block Design (RCBD), and investigated in the early cropping season ...

Seed yield and oil content of some sunflower ( Helianthus annuus L ...

African Journals Online (AJOL)

This research was carried out to determine the effects of irrigation applied at different growth stages on yield, yield components and oil content of sunflower during 2002 and 2003. Sunflower cultivars Sanbro, Tarsan-1018 and Ozdemirbey were used as materials in the experiment which was designed in a split plot of ...

Genetic variance of sunflower yield components - Heliantus annuus L.

Directory of Open Access Journals (Sweden)

Hladni Nada

2003-01-01

Full Text Available The main goals of sunflower breeding in Yugoslavia and abroad are increased seed yield and oil content per unit area and increased resistance to diseases, insects and stress conditions via an optimization of plant architecture. In order to determine the mode of inheritance, gene effects and correlations of total leaf number per plant, total leaf area and plant height, six genetically divergent inbred lines of sunflower were subjected to half diallel crosses. Significant differences in mean values of all the traits were found in the F1 and F2 generations. Additive gene effects were more important in the inheritance of total leaf number per plant and plant height, while in the case of total leaf area per plant the nonadditive ones were more important looking at all the combinations in the F1 and F2 generations. The average degree of dominance (Hi/D1/2 was lower than one for total leaf number per plant and plant height, so the mode of inheritance was partial dominance, while with total leaf area the value was higher than one, indicating super dominance as the mode of inheritance. Significant positive correlation was found: between total leaf area per plant and total leaf number per plant (0.285* and plant height (0.278*. The results of the study are of importance for further sunflower breeding work.

Enhanced X-ray yields in PIXE analysis of some binary metal fluorides

International Nuclear Information System (INIS)

Peisach, M.; Pineda, C.A.; Pillay, A.E.

1993-01-01

Enhanced X-ray yields from the metal components of homogeneous thick targets of binary metal fluorides were observed during PIXE irradiations with protons, deuterons and 3 He ions. The absence of these effects in the pure metals and in the corresponding metal oxides, nitrides and borides suggests that the fluoride component in such compounds plays a key role in producing the enhancement. Coulomb excitation of the extremely low-lying levels of the fluorine nucleus is discussed as a possible mechanism for the improved yields via secondary excitation. (orig.)

Evaluation of Thiobacillus Bacteria and Mycorrhizal Symbiosis on Yield and Yield Components of Garlic (Allium sativum at Different Levels of Sulfur

Directory of Open Access Journals (Sweden)

parvin Hejazi rad

2017-09-01

weight increased significantly at 75s and 1505 in combination with Thiobacillus and mycorrhiza. Also the effects of 150S and150S + M, 150S + T were significant on tuber dry weight. The highest tuber dry weight was obtained in combination of 150S with Thiobacillus and mycorrhiza. The effect of 75s was not significant on tuber dry weight but application of 150S increased significantly dry tuber weight (about 50% over the control plots. Adding Thiobacillus to sulfur treatments (75s and 1505 had a significant effect on tuber dry weight and increased about 38 and 72 percent compared to the control, respectively. Chlorophylla content increased significantly in all treatments compare to the control. While the effects of 150S + M, 150S + T, 150S + M + T were significant on chlorophyllb. The effects of 75S, 75S + M, 75S + T, 75S + M + T, 150S, 150S + M, 150S + T and 150S + M + T were significant on carotenoid. Allicin yield increased significantly in all treatments except mycorrhiza compared to the control. Application of 150 kg sulfur per hectare +Thiobacillus+mycorrhizas increased essential oil yield up to 3 times compare to the control. As a result the essential oil yield increased significantly in treatments of 75 and 150 kg sulfur per hectare compared to the control. Conclusion Tuber dry weight increased significantly with sulfur application in combination with Thiobacillus and mycorrhiza. Chlorophylla content increased significantly in all treatments. Allicin yield increased significantly in all treatments except mycorrhiza. Application of sulfur, increased essential oil yield.

Soybean growth and yield under cover crops

Directory of Open Access Journals (Sweden)

Priscila de Oliveira

2013-04-01

Full Text Available The use of cover crops in no-tillage systems can provide better conditions for the development of soybean plants with positive effects on grain yield and growth analysis techniques allow researchers to characterize and understand the behavior of soybean plants under different straw covers. Thus, the aim of this study was to characterize, using growth analysis, yield components and agronomic performance of soybean under common bean, Brachiaria brizantha and pearl millet straws. The experiment was performed on a soil under cerrado in the municipality of Santo Antônio de Goiás, GO. The experiment was arranged in a randomized complete block design with three treatments (cover crops and five replications. Soybean grain yield was lower in the B. brizantha straw treatment (3,708 kg ha-1 than both in the pearl millet (4.772 kg ha-1 and common bean straw treatments (5,200 kg ha-1. The soybean growth analysis in B. brizantha, pearl millet and common bean allowed characterizing the variation in the production of dry matter of leaves, stems, pods and total and leaf area index that provided different grain yields. The cover crop directly affects the soybean grain yield.

Response of fed dung composted with rock phosphate on yield and ...

African Journals Online (AJOL)

Field experiment was conducted on silty clay loam soil at the research farm of Khyber Pakhtunkhwa Agricultural University, Peshawar to study the effect of RP fed dung composted with RP on the yield, yield components and P uptake of maize (Zea mays. L. Azam). The fertilizers, N, P and K, were applied at the rate of 120- ...

Effect of Organic and Inorganic Fertilizers on Growth and Yield of Tef ...

African Journals Online (AJOL)

toshiba

Results showed that tef yield, some yield components and soil chemical properties are ... integrated soil fertility management is an approach that attempts to make the best use of .... organic fertilizers applied were based on the recommended N equivalent rate for the test ..... Science and engineering of composting: Design,.

Yielding to Stress: Recent Developments in Viscoplastic Fluid Mechanics

Science.gov (United States)

Balmforth, Neil J.; Frigaard, Ian A.; Ovarlez, Guillaume

2014-01-01

The archetypal feature of a viscoplastic fluid is its yield stress: If the material is not sufficiently stressed, it behaves like a solid, but once the yield stress is exceeded, the material flows like a fluid. Such behavior characterizes materials common in industries such as petroleum and chemical processing, cosmetics, and food processing and in geophysical fluid dynamics. The most common idealization of a viscoplastic fluid is the Bingham model, which has been widely used to rationalize experimental data, even though it is a crude oversimplification of true rheological behavior. The popularity of the model is in its apparent simplicity. Despite this, the sudden transition between solid-like behavior and flow introduces significant complications into the dynamics, which, as a result, has resisted much analysis. Over recent decades, theoretical developments, both analytical and computational, have provided a better understanding of the effect of the yield stress. Simultaneously, greater insight into the material behavior of real fluids has been afforded by advances in rheometry. These developments have primed us for a better understanding of the various applications in the natural and engineering sciences.

Expert system for accelerator single-freedom nonlinear components

International Nuclear Information System (INIS)

Wang Sheng; Xie Xi; Liu Chunliang

1995-01-01

An expert system by Arity Prolog is developed for accelerator single-freedom nonlinear components. It automatically yields any order approximate analytical solutions for various accelerator single-freedom nonlinear components. As an example, the eighth order approximate analytical solution is derived by this expert system for a general accelerator single-freedom nonlinear component, showing that the design of the expert system is successful

Effect of Plant Growth Promoting Rhizobacteria on Yield and Yield Components of Garlic Medicinal Plant (Allium sativum L. under the Conditions of Different Organic and Chemical Fertilizers Application

Directory of Open Access Journals (Sweden)

Yaser Esmaeilian

2018-03-01

often underestimated. Garlic is easy to grow and can be grown year-round in mild climates. Garlic cloves are used for consumption (raw and cooked or for medicinal purposes. They have a pungent characteristic, spicy flavor that mellows and sweetens considerably with cooking. Materials and Methods: In order to evaluate the effect of biofertilizers and organic and chemical fertilizers on yield and yield components of garlic (Allium sativum L., a split plot experiment based on RCBD with three replications was conducted in 2015-2016 growing seasons, in Gonabad University, Iran. Main plot included different organic and chemical fertilizers (1- vermicompost, 2- cow manure, 3- chemical fertilizer and 4- control and sub plot included plant growth promoting rhizobacteria (nitroxin, biophosphorous and control. In order to determine physic-chemical properties of soil, sampling was performed at the depth of 0 to 30 cm. Before cultivation, 7 and 30 t.ha-1 vermicompost and cow manure were added to the soil, respectively. Nutrient requirement of garlic for nitrogen, phosphorous and potassium from the chemical source was considered 40, 50 and 60 kg.ha-1. For application of biofertilizers, bulblets inoculated with plant growth promoting rhizobacteria for 15 minutes. Distance in and between rows was considered 10 and 20 cm, respectively. Weeds were controlled manually three times. At the end of the growing season, economic yield, biological yield, plant height, shoot dry weight, bulb diameter, bulblet weight per plant, bulblet volume per plant and bulblet number per plant were measured. Analysis of data variance was performed by using SAS software (Ver 9.1. Results and Discussion: The results showed that simple effect of chemical fertilizer on bulb diameter was not significant but combined application of chemical fertilizer and biophosphorous increased bulb diameter as much as 18% compared to control. Combined application of nitroxin and cow manure increased bulblet weight per plant by 41

Effect of Selenium and Application Methods of Urea Top-dress on Yield and its Components and Quality Traits of Wheat under Rainfed Conditions

Directory of Open Access Journals (Sweden)

M Konani

2018-02-01

Full Text Available Introduction Wheat (Triticum aestivum L. is the greatest nourishment for most of world’s population. In many lands of Iran, water is not enough for irrigation and also the most regions of country have arid and semi-arid climate. Water deficit is an important stressful factor for plant growth and crop productivity. Nitrogen is main component of proteins and enzymes. It is essential in all of the plant growth stages. Application of nitrogen is essential for retard leaf senescence, maintenance of photosynthetic leaf during grain filling period and increasing grain protein. The time and method of nitrogen fertilizer application are effective on grain yield. The reported that maximum of grain yield recorded when that nitrogen fertilizer was applied at sowing time along with foliar application at the tillering stage. In higher plants, the role of selenium is still unclear. Selenium can increase the tolerance of plants to induced oxidative stress include drought, salinity, high temperature. Selenium increases the tolerance of plants by transpiration or osmotic potential under water deficit. The current paper studies the influence of selenium and application methods of urea top-dress under rainfed conditions in order to promote improved drought stress tolerance and increase the quantity and quality of wheat. Materials and Methods In order to study the effect of selenium and application methods of urea top-dress on yield, yield components and quality traits of wheat under rainfed conditions, an experiment was conducted at Ashianeh-ye Sofla village, Khomeyn County, Markazi Province during 2012- 2013 growing season. This experiment was carried out as split plot based on randomized complete block design with four replicates. Experimental factors were included application methods of urea fertilizer in four levels (without application of fertilizer (control, application of 60 kg ha-1 at the tillering stage, application of 30 kg ha-1 at the tillering stage

Effects of planting pattern and density on growth indices, yield and yield component of corn (Zea mays in competition with redroot pigweed (Amaranthus retrofelexus(

Directory of Open Access Journals (Sweden)

alireza barkhi

2009-06-01

Full Text Available An experiment was conducted in 2002-2003 using split-split plot arrangement based on Rondomised Compelete Block Design with three replications at Feiz Abad Agricultural Research Station of Qazvin, in order to study of planting patterns and corn densitis effect in competition with redroot pigweed. Main plots inclouded two planting pattern of corn (P1: single row and P2: double row, sub plots inclouded two corn densities (D1:7 and D2:10 plant/m2 and sub sub plots inclouded 4 weed densities (C1:0, C2:2, C3:6, C4:12 plant/m2. Sampling conducted in 2-weekly intervals and growth indices evaluated. Results indicated that with increasing of weed density CGR, TDW, LAI, number of seeds in row, grain and ear yield decreased but plant height increased. Also LAI, CGR, TDW, number of weed seed and seed,s weight of weed increased. By increasing in corn density LAI, CGR, TDW, ear and grain yield increased, but length and diameter of ear and number of seeds in row decreased. Also LAI and CGR of weed increased, but TDW was decreased. In double row planting pattern just CGR, LAI, TDW of corn were higher significantly than single row planting pattern. But single row planting of weed caused higher LAI, NAR, RGR, CGR and TDW of weed in comparison with double row planting pattern. In 2-way interaction, double row planting pattern and zero densities and 2 weeds/m2 had highest grain yield respectively. There were no significant differences for 3-way interactions but double row planting pattern 10 plant density of corn/m2 zero weed/ m2 had highest grain yield.

Effects of Beak Trimming, Stocking Density and Sex on Carcass Yield, Carcass Components, Plasma Glucose and Triglyceride Levels in Large White Turkeys

Science.gov (United States)

Kiraz, Selahattin

2015-01-01

This study was conducted to determine the effects of beak trimming, stocking density (D) and sex (S) on live weight (LW), carcass yield and its component, and plasma glucose (PG) and triglyceride levels in Large White turkeys. To accomplish this aims, totally 288 d old large white turkey chicks (144 in each sex) were used. Beaks of 77 male and female poults were trimmed when 8 d old with an electrical beak trimmer. The birds were fed by commercial turkey rasion. Experiment was designed as 2 × 2 × 2 factorial arrangement with 3 replications in each group. Beak trimming and stocking density did not affect live weight, carcass composition and its components. The higher LW and carcass weight observed in trimmed groups. As expected, male birds are heavier than female, and carcass percentage (CP) would be adverse. However, in this study, CP of male was higher in trimmed, in 0.25 m2/bird. (D) × sex (S) interaction had an effect on both CP and thigh weights (pcarcass and its some components were higher in male. S × D interaction had an effect on plasma glucose level (p<0.05). Triglyceride level was affected (p<0.05) by sex. Significant relationships were found between percentage of thighs (r=0.447, p<0.01) and percentage of breast (r=0.400, p<0.01). According to this study, it can be said that trimming is useful with density of 0.25 m2/bird in turkey fattening. PMID:26877630

Reliability for systems of degrading components with distinct component shock sets

International Nuclear Information System (INIS)

Song, Sanling; Coit, David W.; Feng, Qianmei

2014-01-01

This paper studies reliability for multi-component systems subject to dependent competing risks of degradation wear and random shocks, with distinct shock sets. In practice, many systems are exposed to distinct and different types of shocks that can be categorized according to their sizes, function, affected components, etc. Previous research primarily focuses on simple systems with independent failure processes, systems with independent component time-to-failure, or components that share the same shock set or type of shocks. In our new model, we classify random shocks into different sets based on their sizes or function. Shocks with specific sizes or function can selectively affect one or more components in the system but not necessarily all components. Additionally the shocks from the different shock sets can arrive at different rates and have different relative magnitudes. Preventive maintenance (PM) optimization is conducted for the system with different component shock sets. Decision variables for two different maintenance scheduling problems, the PM replacement time interval, and the PM inspection time interval, are determined by minimizing a defined system cost rate. Sensitivity analysis is performed to provide insight into the behavior of the proposed maintenance policies. These models can be applied directly or customized for many complex systems that experience dependent competing failure processes with different component shock sets. A MEMS (Micro-electro mechanical systems) oscillator is a typical system subject to dependent and competing failure processes, and it is used as a numerical example to illustrate our new reliability and maintenance models

Effects of Sowing Date, Planting Pattern and Nitrogen Levels on Leaf and Flower Essential Oil, Yield and Component Yield Grain of Buckwheat (Fagopyroum esculentum Moench

Directory of Open Access Journals (Sweden)

M. R Sobhani

2017-12-01

Full Text Available Introduction Buckwheat which has been scientifically named Fagopyrum esculentum can be considered as a yearling broad-leaved plant belonging to the family of Polygonaceae which is known as false Cereal. Its seeds are in use as a nutritional and medicinal product that is due to the rutin content of them. As the population is rapidly increasing worldwide, a solution must be found to supply necessary food. What agriculture science is responsible for is to produce more products with better quality in order to meet this increasing population’s needs so that food poverty and starvation are more likely to be removed and keep food safety. Considering the fact that buckwheat is of a variety of medical, industrial and food applications and in our country and some other ones, it has not been seriously cultivated, this plant must be used as a new plant and it should be extensively applied in multiple planting systems (summer planting for commercial goals through producing seeds while its nutritional value is more than grain and it can be regarded as a rich source of high quality protein, amino acid necessary for lysine, high starch percent, minerals and vitamins for different applications involving cake flour, frumenty and soup and improving the optimal rate of rutin as a secondary metabolite having effective medical features concerning our country’s climatic conditions. Materials and Methods In order to investigate the effects of sowing date, planting patterns and nitrogen on leaf and flower rutin, yield and yield component of Buckwheat plant, a field study was conducted during 2010 and 2011 in Agricultural Research Institute of Arak, Iran. The experimental design was regarded as the randomized complete block design in the form of split plot factorial with three replications. Planting treatments as the fundamental elements may be implemented at two levels including the mounds with the width of 50 cm associated with two planting rows regarding the

Genotype X Environment Interaction for Yield in Field Pea Pisum ...

African Journals Online (AJOL)

user

analysis of variance with individual stability regression co- efficient ... environmental score derived from a principal component ... Grain yield analysis was carried .... Analysis of variance for Additive Main effects and Multiple Interaction (AMMI).

Differential metabolite profiles during fruit development in high-yielding oil palm mesocarp.

Directory of Open Access Journals (Sweden)

Huey Fang Teh

Full Text Available To better understand lipid biosynthesis in oil palm mesocarp, in particular the differences in gene regulation leading to and including de novo fatty acid biosynthesis, a multi-platform metabolomics technology was used to profile mesocarp metabolites during six critical stages of fruit development in comparatively high- and low-yielding oil palm populations. Significantly higher amino acid levels preceding lipid biosynthesis and nucleosides during lipid biosynthesis were observed in a higher yielding commercial palm population. Levels of metabolites involved in glycolysis revealed interesting divergence of flux towards glycerol-3-phosphate, while carbon utilization differences in the TCA cycle were proven by an increase in malic acid/citric acid ratio. Apart from insights into the regulation of enhanced lipid production in oil palm, these results provide potentially useful metabolite yield markers and genes of interest for use in breeding programmes.

genotype by environment interaction and grain yield stability

African Journals Online (AJOL)

Preferred Customer

among environments, GXE interaction and Interaction Principal Component Analysis (IPCA-I) but ... value closer to zero, Genotype Selection Index (GSI) of 4 each and AMMI stability value (ASV) of 0.124 and. 0.087 ..... Analysis of variance for grain yield using Additive Mean Effect and Multiple Interactions (AMMI) model.

Mechanisms of component diffusion in mercury cadmium telluride

International Nuclear Information System (INIS)

Tang, M.S.; Stevenson, D.A.

1989-01-01

The component diffusion coefficients for the Hg/sub 0.8/Cd/sub 0.2/Te (MCT) system are measured using radioactive tracers. Multiple branches are observed in the tracer diffusion profiles which are related to fast and slow-diffusing components. Diffusion models for each component are proposed based on the defect chemistry of MCT, a calculation of the thermodynamic factor, and the relationship between component diffusion coefficients and the interdiffusion coefficients for pseudobinary systems. The model provides insight into the thermodynamic properties of the system, the mechanisms for diffusion, and the practical application of tracer diffusion data to interdiffusion and p-to-n conversion by Hg annealing

Effect of seed-irradiation on morphological characters yield components of brassica campestris var. sarson

International Nuclear Information System (INIS)

Bokhari, F.S.; Ahmad, S.

1996-01-01

Seed of Brassica campestris (var. Sarson) were used to study the effect of radiation of different morphological and yield parameters. Survival percentage showed drastic decrease at higher doses (75 Kr and 100 Kr). Similarly all characters showed a trend of decrease with increasing dose. LD50 for Brassica was about 50 Kr. (author)

Yield Improvement in barley by using gamma irradiation

International Nuclear Information System (INIS)

Ben-Amer, Ibrahim Mohammed

1993-01-01

Sixty two mutant lines in the M4 generation were studies for one year for yield components (heads per plant kernals per head and kernal weight). Four mutant lines out yielded the parent but the differences being significant only with the mutant 2-6-26. This is mainly due to significant increase in number of beads per plant. Yield per plant was correlated with number of heads per plant. In a 2-year field experiment, mutant 2-6-26 out yielded the parent variety, the difference being significant only in one experiment (1988-89). The increase in nitrogen rate from 0 to 100 kg/ha increased yield significantly. mutant 2-6-26 produced 415 g grains/m 2 in the 1987-88 experiment; in 1988-89 experiment, its yields were 426, 610 and 594 g grains/m 2 for the 0, 100 and 200 kg N/ha respectively. The differences in kernal weight were highly significant only in 1988-89 experiment. Lodging was low in 1987-88 experiment due to moisture stress. In 1988-89 experiment, Lodging increased with the increase in N application rate. None of the mutant lines showed any improvement in the resistance to lodging. Mutant 2-6-26 is very promising. It will be evaluated in large yield-trials at different locations in the country. (author)

Sequential Path Model for Grain Yield in Soybean

Directory of Open Access Journals (Sweden)

Mohammad SEDGHI

2010-09-01

Full Text Available This study was performed to determine some physiological traits that affect soybean,s grain yield via sequential path analysis. In a factorial experiment, two cultivars (Harcor and Williams were sown under four levels of nitrogen and two levels of weed management at the research station of Tabriz University, Iran, during 2004 and 2005. Grain yield, some yield components and physiological traits were measured. Correlation coefficient analysis showed that grain yield had significant positive and negative association with measured traits. A sequential path analysis was done in order to evaluate associations among grain yield and related traits by ordering the various variables in first, second and third order paths on the basis of their maximum direct effects and minimal collinearity. Two first-order variables, namely number of pods per plant and pre-flowering net photosynthesis revealed highest direct effect on total grain yield and explained 49, 44 and 47 % of the variation in grain yield based on 2004, 2005, and combined datasets, respectively. Four traits i.e. post-flowering net photosynthesis, plant height, leaf area index and intercepted radiation at the bottom layer of canopy were found to fit as second-order variables. Pre- and post-flowering chlorophyll content, main root length and intercepted radiation at the middle layer of canopy were placed at the third-order path. From the results concluded that, number of pods per plant and pre-flowering net photosynthesis are the best selection criteria in soybean for grain yield.

Selection criteria for the improvement of seed yield and its components in advances generations of lentil (lens culinaris medik)

International Nuclear Information System (INIS)

Ashraf, S.; Hanif, M.; Sadiq, S.; Abbas, G.; Asghar, M.J.

2008-01-01

Present study was conducted at Nuclear Institute for Agriculture and Biology (NIAB), Faisalabad during the years 2006 and 2007 with the objectives; to study the inheritance of seed yield and related traits in both hybridized (F6) and mutated (M6) populations of lentil and to determine the best selection criterion for the improvement of seed yield. Different genetic parameters (variances, heritabilities, genetic gains and correlations) were computed to study the inheritance pattern and interrelationships of different traits. High heritability was observed for days to flower (97.40%), plant height (90.80%), pods per plant (86.20%), hundred seed weight (83.50%) and seed yield per plant (91.80%) in F6 and for days to flower (96.9%), days to mature (91.8%), hundred seed weight (89.0%) and seed yield per plant (94.0%) in M6 generation. High heritability coupled with moderate to high genetic advance was noted for plant height (90.8%, 16.29) pods per plant (86.20%, 25.53) hundred seed weight (83.50%, 35.67) and seed yield per plant (91.80%, 35.84) in F6 generation and for days to flower (96.9%, 25.08), hundred seed weight (89.0%, 25.56) and seed yield per plant (94.0%, 37.01) in M6 generation. The traits mentioned were found to be under the control of additive genes. Seed yield had positive and significant correlation with pods per plant in M6 and with seed weight in both generations. It was concluded that seed weight and pods per plant may be used as selection criterion in both hybridized and mutated populations for the improvement of seed yield. (author)

Yield and competition in barley variety mixtures

Directory of Open Access Journals (Sweden)

Kari Jokinen

1991-09-01

Full Text Available Competition between spring barley varieties and yield performance of two-, three and four-variety mixtures were studied in two replacement series field experiments. In the first experiment, repeated in three successive years (1983 —85 the components were the six-row varieties Agneta, Arra, Hja-673 and Porno. In the second experiment (1984, including two nitrogen doses (50 and 100 kgN/ha, both six-row (Agneta, Pomo and two-row (Ida, Kustaa varieties were used. Arra in the first and Agneta in the second experiment were the most competitive varieties. The results suggested that the fast growth of Arra at the beginning promoted its competitive ability. Increase in available nitrogen usually strengthened the competitiveness of Agneta. The observed competitive differences between varieties were not related to the earliness of a variety, neither to the morphological characters (two- and six-row varieties nor to the grain yield of a variety grown alone. The competitive ability was not always a stable character, the dominant suppression relationship varying from one environment to another (e.g. growing season, nitrogen dose. The observed overyielding was not statistically significant. The ratio of actual to expected yield and the relative yield total of several mixtures exceeded slightly one. As a conclusion, the yield advantage of mixtures was marginal. As a rule, the mixtures were not more stable than monocultures as determined by the coefficient of variation. However, the yield of some mixtures varied less than the yield of the most stable monoculture.

Study of Sowing Date and Seed Priming Effect on Seed Yield, Its Components and Some of Agronomic and Qualitative Properties of Two Spring Canola Cultivars in Hamedan

Directory of Open Access Journals (Sweden)

A. Mohagheghi

2014-12-01

Full Text Available To determine the effect of planting date, cultivar and seed priming on yield, yield components, oil and protein content of seeds of two spring canola cultivars a field experiment was conducted in Bu-Ali Sina University in 2012. The experiment was factorial in a randomized complete block design with three replications. Factors consisted of sowing dates (14 and 24th March and 3rd April, seed priming treatments (no-primed, primed with water and zinc sulfate solution and two canola cultivars (Hayola401 and RGS003. The evaluated traits were number of pod per plant, number of seed per pod, 1000 seeds weight, plant height, oil and protein percentage, yields of seed, oil and biologic and harvest index. The results showed that delay in sowing, except of seed protein percentage, decreased all traits. Seed priming could increase traits of plant height, 1000 seed weight, number of seed per pod, oil percentage and yield and protein percentage in all sowing dates. Seed priming with zinc sulfate solution and water increased the number of pod per plant 16.1 and 10.5 percent, respectively compared to no-primed treatment. The highest seed number per pod was achieved through the priming with water and zinc sulfate solution with an average of 14.3, in the first sowing date for Hayola401 cultivar. Priming with water, especially in the third sowing date increased oil yield by 56 percent in RGS003 cultivar in comparison with its no-primed treatment. Also priming with zinc sulfate and water, increased the harvest index 5.04 and 3.7% respectively compared to no-primed treatment. In general in the case of delay in sowing date in spring rapeseed cultivars especially for RGS003, primed seed preferably with zinc sulfate improves the quantitative and qualitative characteristics of the production.

INFLUENCE OF WEATHER CONDITIONS ON GRAIN YIELD, OIL CONTENT AND OIL YIELD OF NEW OS SUNFLOWER HYBRIDS

Directory of Open Access Journals (Sweden)

Anto Mijić

2017-01-01

Full Text Available With the purpose of determining the influence of weather conditions on the yield components of sunflower, the results of three-year field trials are analysed in the paper. In the trials sown in Osijek in 2013, 2014 and 2015, there were 15 sunflower hybrids: two foreign hybrids and 13 hybrid combinations of the Agricultural Institute Osijek. In the period before sowing (January – March, the highest amount of precipitation was in 2013 (213.1 mm, then in 2015 (167.9 mm, and the lowest in 2014 (109.5 mm. In the growing period (April – September, the highest amount of precipitation (487.3 mm was in 2014, 475.7 mm in 2013, and in 2015 it was the lowest (251.6 mm. In 2013, during the growing period, the mean monthly air temperature was 19.1°C, in 2015 19.9°C, and in 2014 18.6°C. Of these years, statistically significant at the P=0.05, the highest value of the analysed traits was recorded in 2013: grain yield of 6.47 t ha-1, oil content 51.69% and oil yield 3.05 t ha-1. Grain yield, oil content and oil yield were lower in 2015, and the lowest in 2014. Matej, a newly recognized sunflower hybrid of the Agricultural Institute Osijek had the highest values of grain and oil yield (6.95 and 3.39 t ha-1, and by its oil content of 53.44%, it was in the third place. For high grain and oil yields of sunflower, in addition to the optimal air temperature, the amount and distribution of precipitation before and also during the growing season are very important.

Improving adaptation to drought stress in white pea bean (Phaseolus vulgaris L): genotypic effects on grain yield, yield components and pod harvest index

Science.gov (United States)

Common bean (Phaseolus vulgaris L.) is the most important food legume crop in Africa and Latin America where rainfall pattern is unpredictable. The objectives were to identify better yielding common bean lines with good canning quality under drought, and to identify traits that could be used as sele...

Evaluation of chickpea and groundnut for N2 fixation and yield in Bangladesh

International Nuclear Information System (INIS)

Sattar, M.A.; Podder, A.K.; Das, M.L.; Shaikh, M.A.Q.; Danso, S.K.A.

1998-01-01

Field experiments on chickpea and groundnut were variously carried out at four locations in Bangladesh. Generally consistent trends were obtained in terms of positive effects of inoculation with rhizobia, and genotypic diversity for components of N 2 fixation and yield. Inoculation of groundnut increased average nodule number by 77% at Rajshahi, 99% at Mymensingh and 148% at Jamalput. The increases in nodule dry weight, plant dry weight, pod and stover yields due to inoculation ranged from 93 to 146%, 55 to 77%, 43 to 50% and 29 to 80%, respectively. At all three locations, significant differences were found amongst the genotypes for nodulation, dry matter production and yield. Mutant genotype 62-30 was superior for most components, and statistically better than the present variety Dacca-1 for all characteristics investigated. Inoculant application to chickpea resulted in at least a doubling of nodule number at Ishurdi and Mymensingh; on average, there was a three-fold increase in nodule mass as a result of inoculation. Seed-yield increases due to inoculation ranged from 24 to 50%. Inoculated cv. G-97 recorded a seed yield of about 1.5 t/ha at Ishurdi, 47% higher than that produced by Nabin, a variety widely cultivated in Bangladesh. Total-N yield and the amount of N fixed by G-97 with inoculant were also higher than for Hyprosola, which is known for high yield and protein content. In a screening trial at Mymensingh the commercial chickpea Nabin and Hyprosola were consistently inferior to advanced lines produced by mutation breeding. Of 12 mutant groundnut genotypes tested, D1-15KR/62-30 maintained superiority for almost all components. Most of the mutants performed better than the commercial variety Dacca-1. The data show the potential for increasing chickpea and groundnut yields in Bangladesh by improving N 2 fixation via selection of superior genotype in conjunction with compatible rhizobia

Evaluation of growth characters and yield components for six durum wheat lines (triticum durum deaf) selected from M4 and M5 - irradiated population under drought conditions

International Nuclear Information System (INIS)

Nesiem, M. R. A.; Kassem, M. K. M.; Basyouny, M. A. E.

2012-12-01

Grain of two durum wheat cultivars, Sohag 3 and Beni Suef 3 were irradiated with gamma ray doses 0, 150, 250 and 350 Gy to obtain new durum wheat lines, characterized by high yielding and drought tolerance. Irradiated grains were cultivated in the field under normal and drought conditions 2005 - 2010 seasons. 20 grain (M 1 ) from each treatment was planed as in the first season. In the second season (M 2 ), grains of 61 plants were selected as thy had the following higher criteria, i.e yield, grain yield / plant, plant height, tillering and 100 grains weight. The selected variants should exceed by 50% or more than control. Grains of the 61 selected plants were individually sown under normal and drought condition. At the end of this season, six selected putative line had superiority over their parents. The S1 and S2 lines had an excellent grain yield per plant under normal condition but S3 and S4 lines had superiority for grain yield per plant under drought condition as compared to parents Sohag3. B1 and B2 lines had the superiority for grain per plant under normal condition comparing with the parent Beni Suef3. In the fourth season (M4),growth, chemical compositions and yield as well as its components of the six putative lines as well as the parents Sohag 3 and Beni Suef 3 were determined under normal and drought conditions. The results showed a significant under normal and drought conditions. The results showed a significant increase in the number of leaves on the main stem and tillering number / plant for S1, S2, B1, B2 as compared with their corresponding parent under normal condition. Also, S3 and S4 line shad the same results comparing with the parent Sohag3 under drought condition. The results of S3 and S4 showed an accumulation of organic protective asmolytes such as sugar, proline and free amino acid. As well as N, P, K, and Ca concentrations in shoots and roots as compared to the parent Sohag 3 . The putative line S1, A2 and B1 showed significant increase

Yield and flow properties of aluminum alloy AA 8001

International Nuclear Information System (INIS)

Lyons, J.S.; Johnson, H.W.; Han, E.G.

1995-01-01

Aluminum alloy AA 8001 is being used at the Westinghouse Savannah River Company (WSRC) for nuclear reactor fuel and target components. The objective of this research was to determine parameters for predictive models of the compressive flow properties of AA 8001. Seventy-five true strain-rate, hot compression tests were performed. New, quantitative information about the yield and flow behavior of aluminum alloy AA 8001 was determined. Parameters were determined to use in a hyperbolic sine constitutive law so that the yield stress, the peak stress, and the peak strain can be predicted from the temperature-compensated strain-rate, Z. It was found that the onset of strain softening was more strongly dependent on Z than the onset of yielding was

Combining Ability and Heterosis for Grain Yield and its Component Traits in Rice(Oryza sativa L.

Directory of Open Access Journals (Sweden)

Srikrishna LATHA

2013-02-01

Full Text Available The nature and magnitude of heterosis and combining ability was studied in 18 F1 hybrids involving three CMS lines and six testers using line × tester analysis. The analysis of variance for combining ability of all the traits showed that variances due to treatments, parents, hybrids were highly significant. The line ‘CRMS 32A’ and testers viz. ‘Super rice-8’, ‘R 1099-2569-1-1’ and ‘Jitpiti’ were identified as good general combiners. The significant differences between lines x testers interaction indicates that SCA attributed heavily in the expression of these traits and demonstrates the importance of dominance or non additive variances for all the traits. The hybrid ‘CRMS 32A’/‘R 1099-2569-1-1’ and ‘APMS 6A’/‘Super rice-8’ were promising for grain yield. The magnitude of relative heterosis, heterobeltiosis and standard heterosis were also estimated for different characters. A high degree of relative heterosis was observed for grain yield (20.45- 82.37% in the hybrids viz., ‘CRMS 32A’/‘Super rice-8’, ‘APMS 6A’/‘Super rice-8’, ‘APMS 6A’/‘Jitpiti’ and ‘CRMS 32A’/‘R 1099-2569-1-1’. While, a higher degree of: heterobeltiosis (13.60 -68.37% was observed for grain yield in the hybrids viz., ‘CRMS 32A’/‘Super rice-8’, ‘CRMS 32A’/‘R 1099-2569-1-1’, ‘APMS 6A’/’Super rice-8’ and ‘APMS 6A’/’Jitpiti’. A high degree of standard heterosis was observed for grain yield in the hybrid ‘CRMS 32A’/‘R 1099-2569-1-1’. The hybrid ‘CRMS 32A’/ ‘R 1099-2569-1-1’ recorded a high degree of relative heterosis (62.01%, heterobeltiosis (57.35% and standard heterosis (15.05 and 25.51% over check hybrids, ‘Mahamaya’ and ‘Indirasona’, respectively that can be tested on yield trials for its further testing over locations.

Cross-cultural psychometric assessment of the VAGUS insight into psychosis scale - Spanish version.

Science.gov (United States)

de León, Patricia Ponce; Gerretsen, Philip; Shah, Parita; Saracco-Alvarez, Ricardo; Graff-Guerrero, Ariel; Fresán, Ana

2018-01-01

Impaired insight into illness, a core feature of schizophrenia with negative clinical implications, is a multidimensional phenomenon existing on a continuum. However, the degree to which illness perception in distinct cultures influences the appraisal of insight into illness in schizophrenia remains unclear. As such, we aimed to determine if the psychometric properties of the VAGUS insight into psychosis scale (www.vagusonline.com), which was originally assessed in English speaking Canadians, were similar in a sample of Latino Mexican Spanish speaking patients with schizophrenia. To accomplish this, the VAGUS - Self-Report (SR) version was translated from English to Spanish and psychometrically evaluated in 95 participants. The Spanish version of the VAGUS-SR was internally consistent (ᾳ = 0.713), and demonstrated good convergent and discriminant validity with the subscales of the Positive and Negative Syndrome Scale. Factor analysis identified two components of insight, congruent with two of the components of the English version of the VAGUS-SR. In conclusion, the VAGUS-SR is a brief, novel, and valid measure of insight into illness in schizophrenia, which demonstrated similar psychometric properties in two culturally and linguistically distinct samples with schizophrenia. Future studies should assess whether the VAGUS demonstrates similar psychometric properties in non-Western cultures. Copyright © 2017 Elsevier B.V. All rights reserved.

PERFORMANCE OF YIELD AND YIELD CONTRIBUTING CHARACTERISTICS OF BC2F3 POPULATION WITH ADDITION OF BLAST RESISTANT GENE

Directory of Open Access Journals (Sweden)

Muhammad Mahmudul Hasan

2015-10-01

Full Text Available ABSTRACTThe study was carried out in the University Putra Malaysia (UPM Rice Research Centre to evaluate the yield performance of newly developed selected blast resistant plants of BC2F3 generations derived from a cross between MR263, a high yielding rice variety but blast susceptible and Pongsu Seribu 1, donor with blast resistant (Pi-7(tand Pi-d (t1, Pir2-3(tgenes and qLN2 QTL, Malaysian local variety. On the basis of assessed traits, the plants 12, 6, 7, 5, 21, 22, 5, 26, 11, 8, 10, 13 and 15 had the higher yield, blast resistant and good morphological traits. More than 70% heritability was found in days to maturity, plant height, tiller numbers per hill, and panicle per hill, 80% heritability was found in filled grain and yield per hill and more than 90% heritability was found in grain length, grain width and seed weight. Cluster analysis based on the traits grouped 30 plants along with MR263 into seven clusters. According to PCA, the first four principal components account for about 69.3% total variation for all measured traits and exhibited high correlation among the characteristics analyzed.

Genome-wide association mapping for yield and other agronomic traits in an elite breeding population of tropical rice (Oryza sativa).

Science.gov (United States)

Begum, Hasina; Spindel, Jennifer E; Lalusin, Antonio; Borromeo, Teresita; Gregorio, Glenn; Hernandez, Jose; Virk, Parminder; Collard, Bertrand; McCouch, Susan R

2015-01-01

Genome-wide association mapping studies (GWAS) are frequently used to detect QTL in diverse collections of crop germplasm, based on historic recombination events and linkage disequilibrium across the genome. Generally, diversity panels genotyped with high density SNP panels are utilized in order to assay a wide range of alleles and haplotypes and to monitor recombination breakpoints across the genome. By contrast, GWAS have not generally been performed in breeding populations. In this study we performed association mapping for 19 agronomic traits including yield and yield components in a breeding population of elite irrigated tropical rice breeding lines so that the results would be more directly applicable to breeding than those from a diversity panel. The population was genotyped with 71,710 SNPs using genotyping-by-sequencing (GBS), and GWAS performed with the explicit goal of expediting selection in the breeding program. Using this breeding panel we identified 52 QTL for 11 agronomic traits, including large effect QTLs for flowering time and grain length/grain width/grain-length-breadth ratio. We also identified haplotypes that can be used to select plants in our population for short stature (plant height), early flowering time, and high yield, and thus demonstrate the utility of association mapping in breeding populations for informing breeding decisions. We conclude by exploring how the newly identified significant SNPs and insights into the genetic architecture of these quantitative traits can be leveraged to build genomic-assisted selection models.

Psychophysiological prediction of choice: relevance to insight and drug addiction

Science.gov (United States)

Moeller, Scott J.; Hajcak, Greg; Parvaz, Muhammad A.; Dunning, Jonathan P.; Volkow, Nora D.

2012-01-01

An important goal of addiction research and treatment is to predict behavioural responses to drug-related stimuli. This goal is especially important for patients with impaired insight, which can interfere with therapeutic interventions and potentially invalidate self-report questionnaires. This research tested (i) whether event-related potentials, specifically the late positive potential, predict choice to view cocaine images in cocaine addiction; and (ii) whether such behaviour prediction differs by insight (operationalized in this study as self-awareness of image choice). Fifty-nine cocaine abusers and 32 healthy controls provided data for the following laboratory components that were completed in a fixed-sequence (to establish prediction): (i) event-related potential recordings while passively viewing pleasant, unpleasant, neutral and cocaine images, during which early (400–1000 ms) and late (1000–2000 ms) window late positive potentials were collected; (ii) self-reported arousal ratings for each picture; and (iii) two previously validated tasks: one to assess choice for viewing these same images, and the other to group cocaine abusers by insight. Results showed that pleasant-related late positive potentials and arousal ratings predicted pleasant choice (the choice to view pleasant pictures) in all subjects, validating the method. In the cocaine abusers, the predictive ability of the late positive potentials and arousal ratings depended on insight. Cocaine-related late positive potentials better predicted cocaine image choice in cocaine abusers with impaired insight. Another emotion-relevant event-related potential component (the early posterior negativity) did not show these results, indicating specificity of the late positive potential. In contrast, arousal ratings better predicted respective cocaine image choice (and actual cocaine use severity) in cocaine abusers with intact insight. Taken together, the late positive potential could serve as a biomarker

Effect of water stress and harvesting stages on quantitative and qualitative yields of coriander (Coriandrum sativum L.

Directory of Open Access Journals (Sweden)

A. Ahmadian

2016-05-01

Full Text Available In order to study the effect of drought stress and harvesting stages on quantitative and qualitative yields of Coriander (Coriandrum sativum L. this experiment was conducted on split plot based on a randomized completely block design with 3 replications in Torbat-e Heydariyeh University, Iran, during growing season of 2010-2011. Treatments were drought stress (in three levels no stress: control and irrigation in 60 and 30 percentage of FC as main plots and harvesting times (in 3 levels consist of: before flowering, flowering and after flowering as sub plots. Results showed that drought stress and harvesting stages had significant affected on leaf number, height, number of stem, wet and dry weight of plant, SPAD, proline content, carbohydrate content, essential oil yield and percentage and components of essential oil of coriander. Increasing water stress decreased yield and its components while enhanced proline and carbohydrate contents. Maximum of essential oil and its main components (linalool, alpha pentene, gamma terpinene, geranial acetate and camphor were in low stress that had significant difference with other stress treatments. Delaying in harvest enhanced yield and its components and essential oil percentage. Proline content had no significant difference between flowering and after flowering stages. Therefore, we can suggest low stress of water and harvest at after flowering stage to get maximum of yield.

Variation in Yield and Physicochemical Quality Traits among Mutants of Japonica Rice Cultivar Wuyujing 3

OpenAIRE

Abacar, Jose Daniel; Zhao-miao, Lin; Xin-cheng, Zhang; Cheng-qiang, Ding; She, Tang; Zheng-hui, Liu; Shao-hua, Wang; Yan-feng, Ding

2016-01-01

To select elite germplasms, 112 mutants derived from japonica rice cultivar Wuyujing 3 were evaluated. The yield components such as panicle number per square meter, grain number per panicle, and grain weight were measured. The quality traits such as percentage of chalky grains (PCG), brown rice yield (BRY), milled rice yield (MRY), degree of milling (DM), amylose content (AC), protein content (PC), and relationships among traits were inverstigated. Results showed that grain yield ranged from ...

IPRDS: component histories and nuclear plant aging

International Nuclear Information System (INIS)

Borkowski, R.J.; Kahl, W.K.

1984-01-01

A comprehensive assessment of nuclear power plant component operating histories, maintenance histories, and design and fabrication details is essential to understanding aging phenomena. As part of the In-Plant Reliability Data System (IPRDS), an attempt is being made to collect and analyze such information from a sampling of US nuclear power plants. Utilizing the IPRDS, one can reconstruct the failure history of the components and gain new insight into the causes and modes of failures resulting from normal or premature aging. This information assembled from the IPRDS can be combined with operating histories and postservice component inspection results for cradle-to-grave assessments of component aging under operating conditions. A comprehensive aging assessment can then be used to provide guidelines for improving the detection, monitoring, and mitigation of aging-related failures

Diallel Analysis using Hayman Method to Study Genetic Parameters of Yield Components in Pepper(Capsicum annuum L.

Directory of Open Access Journals (Sweden)

MUHAMAD SYUKUR

2010-12-01

Full Text Available One method to obtain genetic information is the diallel cross analysis. The objective of this study was to eavluate the genetic parameters of six inbred pepper (Capsicum annuum L. using full diallel crosses. The experiment was conducted at IPB Experiment Field, Cikabayan, Darmaga. The design was randomized complete block design (RCBD using three replications as blocks. Data from generation F1 and parents were analyzed using the Hayman Method. Results indicated that no epistatic effects were significant for all the traits assessed. Additive genetic effects were larger than the dominant effects for yield per plant, fruit length, and diameter fruit traits. Dominant genetic effects were larger than the additive effects for fruit weight traits. Narrow-sense and broad-sense heritability were high for all the traits assessed. The character of the yield per plant, fruit weight and fruit diameter shows that there were more dominant genes in the parents. There were more recessive genes in parents for the fruit length character. IPB C7 parent was the most recessive genes containing control characters in the yield per plant. In the new improved varieties of high yielding, IPB C7 could be crossed with IPB C9. Employing individual or mass selection breeding should be successful in developing high-productivity lines in this population.

Line tester analysis of yield and yield related attributed in different sunflower genotypes

International Nuclear Information System (INIS)

Din, S.U.; Khan, M.A.; Usman, K.; Sayal, O.U.

2014-01-01

This paper encompasses the study of line * tester analysis to chalk out genetic implications regarding yield and yield relating components in different genotypes of sunflower. Eight parents (four CMS lines and four restorers) along with their sixteen F1 hybrids were considered and planted in Randomized Complete Block Design (RCBD) replicated thrice at experimental area of Oilseed Research Program, National Agriculture Research Centre (NARC), Islamabad, Pakistan in 2011. Combining ability for some important morphological traits included days to flower initiation, days to flower completion, days to maturity, plant height, head diameter and seed yield plant-1. In this concern general combining ability (GCA), reciprocals combining ability (RCA) and specific combining ability (SCA) for all traits were studied. The GCA and SCA variances due to lines and testers interaction were significant for all the characters. However, the magnitude of GCAs from CMS lines (females) and restorers (pollinators) were higher than the SCA indicating preponderance of additive genes in the expression of all the traits. Among the lines, CMS-HA-54 whereas in testers, RHP-71, by manifesting maximum GCA effects were considered as the best general combiners for almost all the traits indicating the presence of more additive gene effects in these parents, therefore may serve as potential parents for hybridization and to improve the characters studied. Among the F1 hybrids, CMS HA-99 * RHP-76 (1.54, 212.65) and CMS HA-101 * RHP-73 (0.91, 432.73) were found as the best specific combiners for head or capitulum and seed yield. Hence, if farming community and researchers include these hybrids in their selection and hybridization program for the trait under study optimum result may be obtained. (author)

Brazilian Soybean Yields and Yield Gaps Vary with Farm Size

Science.gov (United States)

Jeffries, G. R.; Cohn, A.; Griffin, T. S.; Bragança, A.

2017-12-01

Understanding the farm size-specific characteristics of crop yields and yield gaps may help to improve yields by enabling better targeting of technical assistance and agricultural development programs. Linking remote sensing-based yield estimates with property boundaries provides a novel view of the relationship between farm size and yield structure (yield magnitude, gaps, and stability over time). A growing literature documents variations in yield gaps, but largely ignores the role of farm size as a factor shaping yield structure. Research on the inverse farm size-productivity relationship (IR) theory - that small farms are more productive than large ones all else equal - has documented that yield magnitude may vary by farm size, but has not considered other yield structure characteristics. We examined farm size - yield structure relationships for soybeans in Brazil for years 2001-2015. Using out-of-sample soybean yield predictions from a statistical model, we documented 1) gaps between the 95th percentile of attained yields and mean yields within counties and individual fields, and 2) yield stability defined as the standard deviation of time-detrended yields at given locations. We found a direct relationship between soy yields and farm size at the national level, while the strength and the sign of the relationship varied by region. Soybean yield gaps were found to be inversely related to farm size metrics, even when yields were only compared to farms of similar size. The relationship between farm size and yield stability was nonlinear, with mid-sized farms having the most stable yields. The work suggests that farm size is an important factor in understanding yield structure and that opportunities for improving soy yields in Brazil are greatest among smaller farms.

Evaluation of yield in Gamma Radiated Lines Selected from Mutated Generations of Mungbean (Vigna radiata)

International Nuclear Information System (INIS)

Aye Thandar; Phyu Hnin Htike; Myo Myint

2010-12-01

The induced mutation through different gamma radiation frequencies 50, 100, 150, 200, 250, 300, 350, 400, 450 and 500Gy in mungbean was studied for yield components in M3 generation. A Randomized Complete Block Design (RCBD) was employed with three replications in this experiment. The data collected from M3 generation were subjected to statistical analysis with the help of Excel (Microsoft office 2007) and for pairs wise comparison of groups was by SPSS program.In primary yield components, there were no significant difference in M3 generation of pods per plant, pod length and seeds per pod except 100 seeds weight. The plant treated with 250 Gy and 400Gy exploited the maximum value of one hundred seeds weight and yield per plant , respectively. Although there was no significant difference in secondary yield components; 50% flowering days, 50% maturity days and plant height in this generation, highest plant height at 200Gy and early flowering and maturity at 300Gy were obserded. The selection of individual plants in the M3 generation was carried out for high yield. In mutant selection, 250Gy and 400Gy revealed relatively more number of plants having good characters such as more number of pods per plant and longer pod length but not in other treatments and control.

Interrelationship of pollination conditions, fertilization and sunflower seed yield

Directory of Open Access Journals (Sweden)

Joksimović Jovan

2005-01-01

Full Text Available Four commercially important sunflower hybrids (NS-H-45, NS-H-l 11, NS-H-702 and Velja and their parental components (Ha-74B, Ha-98B, CMS-3-8B, Ha-26B, RHA-583, RHA-R-PI-2/1 and RHA-113N were used over a period of two years to study the following traits: disk flower corolla length, nectar content, pollen viability, bee visitation, fertilization percentage and seed yield. Relations among the traits were determined by path coefficient analysis. The simple correlation coefficients showed that fertilization percentage and bee visitation had a highly significant influence on seed yield. The corolla length had a positive effect on nectar content, while nectar content had a significant negative influence on pollen viability. The highest significant direct influence on seed yield was that of fertilization percentage, while the effect on nectar content on seed yield was negative but not significant. The coefficient of determination was 0.8071.

Mechanical design of machine components

CERN Document Server

Ugural, Ansel C

2015-01-01

Mechanical Design of Machine Components, Second Edition strikes a balance between theory and application, and prepares students for more advanced study or professional practice. It outlines the basic concepts in the design and analysis of machine elements using traditional methods, based on the principles of mechanics of materials. The text combines the theory needed to gain insight into mechanics with numerical methods in design. It presents real-world engineering applications, and reveals the link between basic mechanics and the specific design of machine components and machines. Divided into three parts, this revised text presents basic background topics, deals with failure prevention in a variety of machine elements and covers applications in design of machine components as well as entire machines. Optional sections treating special and advanced topics are also included.Key Features of the Second Edition:Incorporates material that has been completely updated with new chapters, problems, practical examples...

Effects of pellet yield on electricity cost in laser fusion generating stations

International Nuclear Information System (INIS)

Bohachevsky, I.O.; Booth, L.A.; Hafer, J.F.; Pendergrass, J.H.

1978-01-01

The dependence of capital and net electricity production costs on fuel pellet yield is investigated for laser fusion reactors based on the magnetically protected and the wetted wall reactor cavity concepts. It is determined that above a certain pellet yield, which depends on the cavity concept, diseconomies of scale occur and the costs per unit output increase with increasing fuel pellet yield. This behavior, determined with the trade-off and analysis computer code TROFAN, is explained through analytical examination of the scaling rules for the laser fusion reactor components

Growth, assimilate partitioning and grain yield response of soybean ...

African Journals Online (AJOL)

This investigation tested variation in the growth components, assimilate partitioning and grain yield of soybean (Glycine max L. Merrrill) varieties established in CO2 enriched atmosphere when inoculated with mixtures of Arbuscular mycorrhizal fungi (AMF) species in the humid rainforest of Nigeria. A pot and a field ...

Effects of diurnal temperature range and drought on wheat yield in Spain

Science.gov (United States)

Hernandez-Barrera, S.; Rodriguez-Puebla, C.; Challinor, A. J.

2017-07-01

This study aims to provide new insight on the wheat yield historical response to climate processes throughout Spain by using statistical methods. Our data includes observed wheat yield, pseudo-observations E-OBS for the period 1979 to 2014, and outputs of general circulation models in phase 5 of the Coupled Models Inter-comparison Project (CMIP5) for the period 1901 to 2099. In investigating the relationship between climate and wheat variability, we have applied the approach known as the partial least-square regression, which captures the relevant climate drivers accounting for variations in wheat yield. We found that drought occurring in autumn and spring and the diurnal range of temperature experienced during the winter are major processes to characterize the wheat yield variability in Spain. These observable climate processes are used for an empirical model that is utilized in assessing the wheat yield trends in Spain under different climate conditions. To isolate the trend within the wheat time series, we implemented the adaptive approach known as Ensemble Empirical Mode Decomposition. Wheat yields in the twenty-first century are experiencing a downward trend that we claim is a consequence of widespread drought over the Iberian Peninsula and an increase in the diurnal range of temperature. These results are important to inform about the wheat vulnerability in this region to coming changes and to develop adaptation strategies.

EXAFS and principal component analysis : a new shell game

International Nuclear Information System (INIS)

Wasserman, S.

1998-01-01

The use of principal component (factor) analysis in the analysis EXAFS spectra is described. The components derived from EXAFS spectra share mathematical properties with the original spectra. As a result, the abstract components can be analyzed using standard EXAFS methodology to yield the bond distances and other coordination parameters. The number of components that must be analyzed is usually less than the number of original spectra. The method is demonstrated using a series of spectra from aqueous solutions of uranyl ions

Assessing the impacts of current and future concentrations of surface ozone on crop yield with meta-analysis

Science.gov (United States)

Feng, Zhaozhong; Kobayashi, Kazuhiko

Meta-analysis was conducted to quantitatively assess the effects of rising ozone concentrations ([O 3]) on yield and yield components of major food crops: potato, barley, wheat, rice, bean and soybean in 406 experimental observations. Yield loss of the crops under current and future [O 3] was expressed relative to the yield under base [O 3] (≤26 ppb). With potato, current [O 3] (31-50 ppb) reduced the yield by 5.3%, and it reduced the yield of barley, wheat and rice by 8.9%, 9.7% and 17.5%, respectively. In bean and soybean, the yield losses were 19.0% and 7.7%, respectively. Compared with yield loss at current [O 3], future [O 3] (51-75 ppb) drove a further 10% loss in yield of soybean, wheat and rice, and 20% loss in bean. Mass of individual grain, seed, or tuber was often the major cause of the yield loss at current and future [O 3], whereas other yield components also contributed to the yield loss in some cases. No significant difference was found between the responses in crops grown in pots and those in the ground for any yield parameters. The ameliorating effect of elevated [CO 2] was significant in the yields of wheat and potato, and the individual grain weight in wheat exposed to future [O 3]. These findings confirm the rising [O 3] as a threat to food security for the growing global population in this century.

Nutritional status, yield and composition of peach fruit subjected to the application of organic compost

Directory of Open Access Journals (Sweden)

George Wellington Bastos de Melo

2016-01-01

Full Text Available The purpose of this study was to evaluate the nutritional state, yield and composition of peaches on peach trees subjected to the application of organic compost to the soil. This experiment was conducted during the 2008 and 2009 cropping season in an orchard containing Chimarrita cultivars grafted onto Capdeboscq rootstocks and Haplumbrept soils in the municipality of Farroupilha (RS, Brazil. The treatments included 0, 9, 18, 36, 72 and 144 liters of organic compost per plant-1 year-1. The total nutrient contents in the leaves, yield components, yields per plant and hectare and compositions of the fruits were evaluated in 2008 and 2009 soon after harvest and after 30 days of storage. The application of organic compost to the soil increased the yield components and the yields per plant and hectare in the two treatments with the highest compost additions, which indicated that the addition of 72 L of compost per plant-1 is ideal economically. The organic compost had little effect on the composition of the peach fruit after harvest and after 30 days of storage.

GENETIC ANALYSIS OF YIELD AND YIELD COMPONENTS IN ...

African Journals Online (AJOL)

ACSS

2Department of Crop and Soil Sciences, Faculty of Agriculture and Natural Resources, Kwame Nkrumah. University of Science and Technology, Kumasi, Ghana. Corresponding author: kamara.nabieu@yahoo.com. (Received 1 February, 2017; accepted 16 November, 2017). ABSTRACT. The number one goal of most rice ...

Relationship between rice yield and climate variables in southwest Nigeria using multiple linear regression and support vector machine analysis

Science.gov (United States)

Oguntunde, Philip G.; Lischeid, Gunnar; Dietrich, Ottfried

2018-03-01

This study examines the variations of climate variables and rice yield and quantifies the relationships among them using multiple linear regression, principal component analysis, and support vector machine (SVM) analysis in southwest Nigeria. The climate and yield data used was for a period of 36 years between 1980 and 2015. Similar to the observed decrease ( P 1 and explained 83.1% of the total variance of predictor variables. The SVM regression function using the scores of the first principal component explained about 75% of the variance in rice yield data and linear regression about 64%. SVM regression between annual solar radiation values and yield explained 67% of the variance. Only the first component of the principal component analysis (PCA) exhibited a clear long-term trend and sometimes short-term variance similar to that of rice yield. Short-term fluctuations of the scores of the PC1 are closely coupled to those of rice yield during the 1986-1993 and the 2006-2013 periods thereby revealing the inter-annual sensitivity of rice production to climate variability. Solar radiation stands out as the climate variable of highest influence on rice yield, and the influence was especially strong during monsoon and post-monsoon periods, which correspond to the vegetative, booting, flowering, and grain filling stages in the study area. The outcome is expected to provide more in-depth regional-specific climate-rice linkage for screening of better cultivars that can positively respond to future climate fluctuations as well as providing information that may help optimized planting dates for improved radiation use efficiency in the study area.

Root cause analysis in support of reliability enhancement of engineering components

International Nuclear Information System (INIS)

Kumar, Sachin; Mishra, Vivek; Joshi, N.S.; Varde, P.V.

2014-01-01

Reliability based methods have been widely used for the safety assessment of plant system, structures and components. These methods provide a quantitative estimation of system reliability but do not give insight into the failure mechanism. Understanding the failure mechanism is a must to avoid the recurrence of the events and enhancement of the system reliability. Root cause analysis provides a tool for gaining detailed insights into the causes of failure of component with particular attention to the identification of fault in component design, operation, surveillance, maintenance, training, procedures and policies which must be improved to prevent repetition of incidents. Root cause analysis also helps in developing Probabilistic Safety Analysis models. A probabilistic precursor study provides a complement to the root cause analysis approach in event analysis by focusing on how an event might have developed adversely. This paper discusses the root cause analysis methodologies and their application in the specific case studies for enhancement of system reliability. (author)

Untangling Galaxy Components - The Angular Momentum Parameter

Science.gov (United States)

Tabor, Martha; Merrifield, Michael; Aragon-Salamanca, Alfonso

2017-06-01

We have developed a new technique to decompose Integral Field spectral data cubes into separate bulge and disk components, allowing us to study the kinematic and stellar population properties of the individual components and how they vary with position. We present here the application of this method to a sample of fast rotator early type galaxies from the MaNGA integral field survey, and demonstrate how it can be used to explore key properties of the individual components. By extracting ages, metallicities and the angular momentum parameter lambda of the bulges and disks, we show how this method can give us new insights into the underlying structure of the galaxies and discuss what this can tell us about their evolution history.

A simple, high-yield, apparatus for NEG coating of vacuum beamline elements

International Nuclear Information System (INIS)

Ron, G; Oort, R; Lee, D

2010-01-01

Non-Evaporable Getter (NEG) materials are extremely useful in vacuum systems for achieving Ultra High Vacuum. Recently, these materials have been used to coat the inner surfaces of vacuum components, acting as an internal, passive, vacuum pump. We have constructed a low cost apparatus, which allows coating of very small diameter vacuum tubes, used as differential pumping stages. Despite the relative ease of construction, we are routinely able to achieve high coating yields. We further describe an improvement to our system, which is able to achieve the same yield, at an even lower complexity by using an easily manufactured permanent magnet arrangement. The designs described are extendible to virtually any combination of length and diameter of the components to be coated.

Evaluation the effects of organic, biological and chemical fertilizers on morphological traits, yield and yield components of Basil (Ocimum basilicum L.

Directory of Open Access Journals (Sweden)

S. M.K Tahhami Zarandi

2015-04-01

Full Text Available The use of organic manure and biofertilizers containing beneficial microorganisms instead of chemical fertilizers are known to improve plant growth through supply of plant nutrients and can help sustain environmental health and soil productivity. Because of special priority of the medicinal plants production in sustainable agricultural systems and lack of studies on assessment of different sources of fertilizer on basil plants, an experiment was conducted at Research Station, Faculty of Agriculture, Ferdowsi University of Mashhad, Iran, in 2009. A complete randomize block design with ten treatments, and three replications was used. The treatments were: 1cow manure, 2sheep manure, 3hen manure, 4compost 5vermicompost, 6biological fertilizer nitroxin (consisting of Azotobacter and Azospirillum, 7biological fertilizer consisting of Phosphate Solubilizing Bacteria (Pseudomonas and Bacillus, 8mixture of biological fertilizer nitroxin and Phosphate Solubilizing Bacteria 9NPK fertilizers, and 10control (no fertilizer. Results showed plant height in sheep manure was higher than other treatments. Number of branches in vermicompost and number of inflorescence in cow manure were significantly higher than other treatments. The number of whorled flowers in compost, sheep and cow manure were more than other treatments. Highest leaf and green area index was observed in nitroxin treatment and biological yield in sheep manure have significant difference with other treatments (except cow manure. The highest seed yield were obtained from plants treated with compost (1945 kg/h and the lowest of that observed in NPK fertilizer and control treatments. In all measured traits (except number of inflorescence NPK fertilizer and control treatment did not have any significant difference.

Effects of inter-varietal diversity, biotic stresses and environmental productivity on grain yield of spring barley variety mixtures

DEFF Research Database (Denmark)

Kiær, Lars Pødenphant; Skovgaard, Ib M.; Østergård, Hanne

2012-01-01

than their component varieties when accounting also for the general response to environmental productivity. Hence, most mixtures adapted slightly better to environmental productivity and were less sensitive to environmental stress than their component varieties. We conclude that the efficacy of variety...... mixtures may be enhanced by mixing relatively high-yielding varieties differing in responsiveness to environmental productivity.......Varietal seed mixtures tend to increase and stabilize crop yields, yet their application is sparse. Large-scale cultivation of variety mixtures may require a better understanding of how inter-varietal interactions and their interaction with the environment may influence the grain yield of variety...

Effect of Different Culture Media on Broccoli (Brassica oleracea var. italica Yield Components and Mineral Elements Concentration in Soilless Culture

Directory of Open Access Journals (Sweden)

Kamran Ghasemi

2018-03-01

Full Text Available Introduction: Broccoli is one of the valuable vegetables among brassicas which has received great attention throughout the world and is cultivated both in soil and soilless culture. Currently, we face restriction in high quality of the soils and water resources as two essential inputs in agriculture. Like other parts of the world, Iran is losing hundred hectares of its arable and fertile land annually due to salinity, alkalinity and waterlogging. One of the important strategies to overcome these adverse conditions is soilless culture systems. Among the different methods of soilless culture, substrate culture is more common and cheaper than others. Different kinds of organic and inorganic substances are used in soilless culture system, but the optimum mixture of growing medium is still a challenging issue. Physical and chemical characteristics of growing media can potentially affect the yield and product quality in direct and indirect ways. A good medium for soilless culture should have easy drainage, appropriate aeration, high water holding capacity and low price, as well as no weed seeds and pathogens. Therefore, this research was aimed to evaluate different prevalent growing media in broccoli soilless culture system. Materials and Methods: This experiment was conducted as an outdoor soilless culture system in outdoor hydroponic site in Sari Agricultural Sciences and Natural Recourses University (SANRU. To begin with, broccoli seeds were sown in transplanting tray, and after five weeks, the developed transplants were cultivated in growing bags in a soilless system. In this work, different mixtures of culture media were evaluated for yield component and mineral elements of broccoli. Ten kinds of different media comprising of cocopeat, perlite, sand, sawdust, sand+sawdust, sand+vermicompost, cocopeat+perlite, cocopeat+LECA, cocopeat+ pumice, and cocopeat+perlite+ vermicompost were compared in completely randomized design with tree replications

Analysis Insights, August 2015: Sustainable Transportation; NREL (National Renewable Energy Laboratory)

Energy Technology Data Exchange (ETDEWEB)

None

2015-08-01

NREL Analysis Insights mines our body of analysis work to synthesize topical insights and key findings. In this issue, we examine transportation systems, alternative fuels, and implications of increasing electrification of transit. Moving people and goods from point A to B has never been easier, but our current transportation systems also take a toll on our environment. Transportation currently accounts for 71% of total U.S. petroleum use and 33% of the nation’s total carbon emissions. With new technology, can we make our transportation system cleaner and more cost effective? NREL is applying its analytical expertise and imagination to do just that. Solutions start with systems thinking. Connecting the dots between physical components - vehicles, fueling stations, and highways - and institutional components - traffic laws, regulations, and vehicle standards - helps illuminate solutions that address the needs of the transportation system's many stakeholders.

Effect of salinity on grain yield and grain quality of wheat (triticum aestivum l.)

International Nuclear Information System (INIS)

Abbas, G.; Saqib, M.; Rafique, Q.; Rahman, A.U.; Akhtar, J.; Haq, M.A.U.

2013-01-01

Salinity is one of the important stresses resulting in the reduction of growth and yield of different crops including wheat. In saline soils the concentration of Na/sup +/ and Cl/sup -/ is higher accompanied with the decreased K/sup +/: Na/sup +/ ratio thus severely affecting the growth and yield of crops. The effect of salinity on the growth and yield of wheat is well documented, whereas there is very little information about salinity tolerance and grain quality of wheat. Present study was conducted to assess the effect of salinity on yield components, ionic relations and grain quality and to understand the relationship among these parameters. A pot experiment was conducted using wheat genotype Pasban-90. There were two treatments i.e. non-saline (0.33 dS m/sup -1/) and saline (15 dS m/sup -1/) with five replications. Salinity resulted in a significant reduction of the grain protein, fat and fiber contents. Similarly yield components were significantly reduced. Maximum reduction was noted in case of number of tillers plant/sup -1/, followed by grain weight plant/sup -1/. High Na/sup +/ and low K/sup +/, P concentration and K/sup +/: Na/sup +/ ratio was observed in the shoot, root and grain. This disturbed ionic composition seems to be apparent cause of yield reduction and deterioration of wheat quality under salinity. (author)

Climate Variability and Yields of Major Staple Food Crops in Northern Ghana

Science.gov (United States)

Amikuzuno, J.

2012-12-01

Climate variability, the short-term fluctuations in average weather conditions, and agriculture affect each other. Climate variability affects the agroecological and growing conditions of crops and livestock, and is recently believed to be the greatest impediment to the realisation of the first Millennium Development Goal of reducing poverty and food insecurity in arid and semi-arid regions of developing countries. Conversely, agriculture is a major contributor to climate variability and change by emitting greenhouse gases and reducing the agroecology's potential for carbon sequestration. What however, is the empirical evidence of this inter-dependence of climate variability and agriculture in Sub-Sahara Africa? In this paper, we provide some insight into the long run relationship between inter-annual variations in temperature and rainfall, and annual yields of the most important staple food crops in Northern Ghana. Applying pooled panel data of rainfall, temperature and yields of the selected crops from 1976 to 2010 to cointegration and Granger causality models, there is cogent evidence of cointegration between seasonal, total rainfall and crop yields; and causality from rainfall to crop yields in the Sudano-Guinea Savannah and Guinea Savannah zones of Northern Ghana. This suggests that inter-annual yields of the crops have been influenced by the total mounts of rainfall in the planting season. Temperature variability over the study period is however stationary, and is suspected to have minimal effect if any on crop yields. Overall, the results confirm the appropriateness of our attempt in modelling long-term relationships between the climate and crop yield variables.

Characterization of heat tolerance in wheat cultivars and effects on production components

Directory of Open Access Journals (Sweden)

Adérico Júnior Badaró Pimentel

2015-04-01

Full Text Available Abstract: There is a need for heat tolerant wheat cultivars adapted to the expansion of cultivation areas in warmer regions due to the high demand of this cereal for human consumption. The objective of this study was to evaluate the effect of high temperatures on grain yield and yield components of wheat and characterize heat tolerant wheat genotypes at different development stages. The genotypes were evaluated in the field with and without heat stress. High temperatures reduced the number of spikelets per spike (21%, number of grains per spike (39%, number of grains per spikelet (23%, 1000-grain weight (27% and grain yield (79%. Cultivars MGS 1 Aliança, Embrapa 42, IAC 24-Tucuruí and IAC 364-Tucuruí III are the most tolerant to heat stress between the stages double ridge and terminal spikelet; MGS 1 Aliança, BRS 264, IAC 24-Tucuruí, IAC 364-Tucuruí III and VI 98053, between meiosis and anthesis; and BRS 254, IAC-24-Tucuruí, IAC-364-Tucuruí III and VI 98053, between anthesis and physiological maturity. High temperatures reduce grain yield and yield components. The number of grains per spike is the most reduced component under heat stress. The genotypes differed in tolerance to heat stress in different developmental stages.

Quantitative Trait Loci Mapping in Brassica rapa Revealed the Structural and Functional Conservation of Genetic Loci Governing Morphological and Yield Component Traits in the A, B, and C Subgenomes of Brassica Species

Science.gov (United States)

Li, Xiaonan; Ramchiary, Nirala; Dhandapani, Vignesh; Choi, Su Ryun; Hur, Yoonkang; Nou, Ill-Sup; Yoon, Moo Kyoung; Lim, Yong Pyo

2013-01-01

Brassica rapa is an important crop species that produces vegetables, oilseed, and fodder. Although many studies reported quantitative trait loci (QTL) mapping, the genes governing most of its economically important traits are still unknown. In this study, we report QTL mapping for morphological and yield component traits in B. rapa and comparative map alignment between B. rapa, B. napus, B. juncea, and Arabidopsis thaliana to identify candidate genes and conserved QTL blocks between them. A total of 95 QTL were identified in different crucifer blocks of the B. rapa genome. Through synteny analysis with A. thaliana, B. rapa candidate genes and intronic and exonic single nucleotide polymorphisms in the parental lines were detected from whole genome resequenced data, a few of which were validated by mapping them to the QTL regions. Semi-quantitative reverse transcriptase PCR analysis showed differences in the expression levels of a few genes in parental lines. Comparative mapping identified five key major evolutionarily conserved crucifer blocks (R, J, F, E, and W) harbouring QTL for morphological and yield components traits between the A, B, and C subgenomes of B. rapa, B. juncea, and B. napus. The information of the identified candidate genes could be used for breeding B. rapa and other related Brassica species. PMID:23223793

Relationship between rice yield and climate variables in southwest Nigeria using multiple linear regression and support vector machine analysis.

Science.gov (United States)

Oguntunde, Philip G; Lischeid, Gunnar; Dietrich, Ottfried

2018-03-01

This study examines the variations of climate variables and rice yield and quantifies the relationships among them using multiple linear regression, principal component analysis, and support vector machine (SVM) analysis in southwest Nigeria. The climate and yield data used was for a period of 36 years between 1980 and 2015. Similar to the observed decrease (P  1 and explained 83.1% of the total variance of predictor variables. The SVM regression function using the scores of the first principal component explained about 75% of the variance in rice yield data and linear regression about 64%. SVM regression between annual solar radiation values and yield explained 67% of the variance. Only the first component of the principal component analysis (PCA) exhibited a clear long-term trend and sometimes short-term variance similar to that of rice yield. Short-term fluctuations of the scores of the PC1 are closely coupled to those of rice yield during the 1986-1993 and the 2006-2013 periods thereby revealing the inter-annual sensitivity of rice production to climate variability. Solar radiation stands out as the climate variable of highest influence on rice yield, and the influence was especially strong during monsoon and post-monsoon periods, which correspond to the vegetative, booting, flowering, and grain filling stages in the study area. The outcome is expected to provide more in-depth regional-specific climate-rice linkage for screening of better cultivars that can positively respond to future climate fluctuations as well as providing information that may help optimized planting dates for improved radiation use efficiency in the study area.

Statistical evaluation of nutritional components impacting phycocyanin production in Synechocystis SP

Directory of Open Access Journals (Sweden)

Devendra V. Deshmukh

2012-03-01

Full Text Available Alkaliphilic cyanobacterial cultures were isolated from Lonar lake (MS, India. Among the set of cultures, Synechocystis sp, was studied for phycocyanin production. A maximum yield was obtained in BG-11 medium at optimized conditions (pH 10 and 16 h light. In order to increase the phycocyanin yield media optimization based on the eight media components a Plackett-Burman design of the 12 experimental trials was used. As per the analysis CaCl2.2H2O and Na2CO3 have been found to be the most influencing media components at 95% significance. Further the optimum concentrations of these components were estimated following a Box Wilson Central Composite Design (CCD with four star points and five replicates at the center points for each of two factors was adopted for optimization of these two media components. The results indicated that there was an interlinked influence of CaCl2.2H2O and Na2CO3 on 98% significance. The maximum yield of phycocyanin (12% of dry wt could be obtained at 0.058 g/l and 0.115 g/l of CaCl2.2H2O and Na2CO3, respectively.

Genetic characterisation of seed yield and fertility traits in perennial ryegrass (Lolium perenne L.)

DEFF Research Database (Denmark)

Studer, Bruno; Jensen, Louise Bach; Hentrup, Stephan

2008-01-01

A population. Path analysis partitioned the direct and indirect effects of seed yield components on seed yield per plant. Seed yield per panicle showed the highest effect on total seed yield. The adjusted mean values of each trait and a genetic linkage map consisting of 97 anonymous and 85 gene associated DNA......Seed yield is a trait of major interest for the key grassland species Lolium perenne L. An F2 mapping population of perennial ryegrass (VrnA), recently characterised for vernalisation response, was assessed in a glasshouse for traits related to seed yield based on a lattice design with four...... replications over 2 years. The traits heading date, plant height, length of panicles, number of panicles per plant, seed yield per panicle, flag leaf length, flag leaf width and seed yield per plant revealed repeatabilities ranging from 41 to 76% and a considerable amount of genetic variation in the Vrn...

Changes in crop yields and their variability at different levels of global warming

Science.gov (United States)

Ostberg, Sebastian; Schewe, Jacob; Childers, Katelin; Frieler, Katja

2018-05-01

An assessment of climate change impacts at different levels of global warming is crucial to inform the policy discussion about mitigation targets, as well as for the economic evaluation of climate change impacts. Integrated assessment models often use global mean temperature change (ΔGMT) as a sole measure of climate change and, therefore, need to describe impacts as a function of ΔGMT. There is already a well-established framework for the scalability of regional temperature and precipitation changes with ΔGMT. It is less clear to what extent more complex biological or physiological impacts such as crop yield changes can also be described in terms of ΔGMT, even though such impacts may often be more directly relevant for human livelihoods than changes in the physical climate. Here we show that crop yield projections can indeed be described in terms of ΔGMT to a large extent, allowing for a fast estimation of crop yield changes for emissions scenarios not originally covered by climate and crop model projections. We use an ensemble of global gridded crop model simulations for the four major staple crops to show that the scenario dependence is a minor component of the overall variance of projected yield changes at different levels of ΔGMT. In contrast, the variance is dominated by the spread across crop models. Varying CO2 concentrations are shown to explain only a minor component of crop yield variability at different levels of global warming. In addition, we find that the variability in crop yields is expected to increase with increasing warming in many world regions. We provide, for each crop model, geographical patterns of mean yield changes that allow for a simplified description of yield changes under arbitrary pathways of global mean temperature and CO2 changes, without the need for additional climate and crop model simulations.

Application of heterocyclic aldehydes as components in Ugi–Smiles couplings

Directory of Open Access Journals (Sweden)

Katelynn M. Mason

2016-09-01

Full Text Available Efficient one-pot Ugi–Smiles couplings are reported for the use of furyl-substituted aldehyde components. In the presence of these heterocyclic aldehydes, reactions tolerated variations in amine components and led to either isolated N-arylamide Ugi–Smiles adducts or N-arylepoxyisoindolines, products of tandem Ugi–Smiles Diels–Alder cyclizations, in moderate yields. A thienyl-substituted aldehyde was also a competent component for Ugi–Smiles adduct formation.

Optimizing rice yields while minimizing yield-scaled global warming potential.

Science.gov (United States)

Pittelkow, Cameron M; Adviento-Borbe, Maria A; van Kessel, Chris; Hill, James E; Linquist, Bruce A

2014-05-01

To meet growing global food demand with limited land and reduced environmental impact, agricultural greenhouse gas (GHG) emissions are increasingly evaluated with respect to crop productivity, i.e., on a yield-scaled as opposed to area basis. Here, we compiled available field data on CH4 and N2 O emissions from rice production systems to test the hypothesis that in response to fertilizer nitrogen (N) addition, yield-scaled global warming potential (GWP) will be minimized at N rates that maximize yields. Within each study, yield N surplus was calculated to estimate deficit or excess N application rates with respect to the optimal N rate (defined as the N rate at which maximum yield was achieved). Relationships between yield N surplus and GHG emissions were assessed using linear and nonlinear mixed-effects models. Results indicate that yields increased in response to increasing N surplus when moving from deficit to optimal N rates. At N rates contributing to a yield N surplus, N2 O and yield-scaled N2 O emissions increased exponentially. In contrast, CH4 emissions were not impacted by N inputs. Accordingly, yield-scaled CH4 emissions decreased with N addition. Overall, yield-scaled GWP was minimized at optimal N rates, decreasing by 21% compared to treatments without N addition. These results are unique compared to aerobic cropping systems in which N2 O emissions are the primary contributor to GWP, meaning yield-scaled GWP may not necessarily decrease for aerobic crops when yields are optimized by N fertilizer addition. Balancing gains in agricultural productivity with climate change concerns, this work supports the concept that high rice yields can be achieved with minimal yield-scaled GWP through optimal N application rates. Moreover, additional improvements in N use efficiency may further reduce yield-scaled GWP, thereby strengthening the economic and environmental sustainability of rice systems. © 2013 John Wiley & Sons Ltd.

A crop model-based approach for sunflower yields

Directory of Open Access Journals (Sweden)

João Guilherme Dal Belo Leite

2014-10-01

Full Text Available Pushed by the Brazilian biodiesel policy, sunflower (Helianthus annuus L. production is becoming increasingly regarded as an option to boost farmers' income, particularly under semi-arid conditions. Biodiesel related opportunities increase the demand for decision-making information at different levels, which could be met by simulation models. This study aimed to evaluate the performance of the crop model OILCROP-SUN to simulate sunflower development and growth under Brazilian conditions and to explore sunflower water- and nitrogen-limited, water-limited and potential yield and yield variability over an array of sowing dates in the northern region of the state of Minas Gerais, Brazil. For model calibration, an experiment was conducted in which two sunflower genotypes (H358 and E122 were cultivated in a clayey soil. Growth components (leaf area index, above ground biomass, grain yield and development stages (crop phenology were measured. A database composed of 27 sunflower experiments from five Brazilian regions was used for model evaluation. The spatial yield distribution of sunflower was mapped using ordinary kriging in ArcGIS. The model simulated sunflower grain productivity satisfactorily (Root Mean Square Error ≈ 13 %. Simulated yields were relatively high (1,750 to 4,250 kg ha-1 and the sowing window was fairly wide (Oct to Feb for northwestern locations, where sunflower could be cultivated as a second crop (double cropping at the end of the rainy season. The hybrid H358 had higher yields for all simulated sowing dates, growth conditions and selected locations.

Upland rice yield as affected by Brachiaria coverage management

Directory of Open Access Journals (Sweden)

Adriano S. Nascente

2015-01-01

Full Text Available An important point in no-tillage system is the time between cover crop glyphosate desiccation and rice sowing. This study aimed to verify the effect of Brachiaria ruziziensis management time before rice sowing on rice yield and its components. The experiment was conducted under greenhouse conditions and consisted of four types of B. ruziziensis management: with Brachiaria and with herbicide (WBWH, without Brachiaria shoots and with herbicide (NBWH, without Brachiaria shoots and without herbicide (NBNH, and with Brachiaria and without herbicide (WBNH, at four times: 30, 20, 10, and 0 days, preceding the rice sowing. The amount of B. ruziziensis dry matter increased as the management was done closer to the rice sowing date. The WBWH and WBNH managements (this one causes the lowest rice grain yield must be done 30 days before rice sowing; while NBWH management must be done ten or more days before rice sowing. On the other hand, NBNH management (this one favors the best rice grain yield can be done until rice sowing day. Despite some reduction in rice yield caused by the B. ruziziensis management, when it was done at the proper time the rice grain yield was similar to the control (without Brachiaria sowing and without herbicide application.

Yielding physically-interpretable emulators - A Sparse PCA approach

Science.gov (United States)

Galelli, S.; Alsahaf, A.; Giuliani, M.; Castelletti, A.

2015-12-01

Projection-based techniques, such as Principal Orthogonal Decomposition (POD), are a common approach to surrogate high-fidelity process-based models by lower order dynamic emulators. With POD, the dimensionality reduction is achieved by using observations, or 'snapshots' - generated with the high-fidelity model -, to project the entire set of input and state variables of this model onto a smaller set of basis functions that account for most of the variability in the data. While reduction efficiency and variance control of POD techniques are usually very high, the resulting emulators are structurally highly complex and can hardly be given a physically meaningful interpretation as each basis is a projection of the entire set of inputs and states. In this work, we propose a novel approach based on Sparse Principal Component Analysis (SPCA) that combines the several assets of POD methods with the potential for ex-post interpretation of the emulator structure. SPCA reduces the number of non-zero coefficients in the basis functions by identifying a sparse matrix of coefficients. While the resulting set of basis functions may retain less variance of the snapshots, the presence of a few non-zero coefficients assists in the interpretation of the underlying physical processes. The SPCA approach is tested on the reduction of a 1D hydro-ecological model (DYRESM-CAEDYM) used to describe the main ecological and hydrodynamic processes in Tono Dam, Japan. An experimental comparison against a standard POD approach shows that SPCA achieves the same accuracy in emulating a given output variable - for the same level of dimensionality reduction - while yielding better insights of the main process dynamics.

Yield estimation for nuclear explosions of semipalatinsk using rayleigh waves recorded at SRO, Mashhad

International Nuclear Information System (INIS)

Naghizadeh, M.; Javaherian, A.; Sadidkhooy, A.

2005-01-01

Surface wave amplitudes from explosion sources show less variation for a given event than body wave amplitudes, so it is natural to expect that yield estimation derived from surface waves will be more accurate than yield estimation derived from body waves. However yield estimation from surface waves is complicated by the presence of tectonic strain release, which acts like one or more earthquake sources superimposed on the explosion. Explosions on an island or near a mountain slope can exhibit anomalous surface waves similar to those caused by tectonic strain release. One of the methods in estimating the yield of nuclear explosions is to determine a relationship between the magnitude and the yield of an explosion. The kind of magnitude employed has an important role in this regard. In this paper, vertical component of long period seismograms at SRO, Mashhad from explosions occurred in semipalatinsk test site, semipalatinsk test site east of Kazakhstan) are considered. First, by using the relationships of IASPEI and Rezapour and Pearce (1998), we determined surface wave magnitude (MS) which is defined as the logarithm of the amplitude plus a distance correction. Then we derived a relation for M S versus yield for a data set which includes a 15 long period seismograms recorded at SRO Mashhad station from semipalatinsk test site nuclear explosions. Furthermore, by digitizing the vertical component of seismograms and transforming them to the frequency domain, the mean amplitude of records at frequency ranges of 0.04-0.06 Hz were calculated. Then, surface wave magnitudes in the frequency domain (M Sf ) and their corresponding yield-magnitude relationship were obtained. By comparing correlation coefficients of these two yield-magnitude relationships, following relationship M S = 1.079 log(Y) + 1.714, was chosen for estimating the yield of semipalatinsk test site nuclear explosion from seismograms of SRO

Experimental research of the yielding behavior of a graphite cylinder subjected to line loading

International Nuclear Information System (INIS)

Liu Hetong; Ma Qinwei; Ma Shaopeng; Wang Hongtao

2014-01-01

The graphite material cylinders are widely used in High-temperature gas-cooled reactor as connecting components. For engineering design, the deformation behavior, especially the yielding process of the graphite cylinder should be investigated in order to evaluate the carrying capacity of the cylinder. The yielding formation and propagation of a graphite cylinder subjected to line loading, which corresponds to the global behavior of the structure, was experimentally studied and evaluated by measuring the strain fields on the end of the cylinder using Digital Image Correlation. The global behavior of the structure is expressed by a relationship between the average stress (load divided by contact area) and the equivalent strain (ratio of half width of contact area to radius of the cylinder), the contact area was measured by identifying the color area of the pressure film in a new experiment which graphite component is loaded and unloaded continuously. A correspondence between the yielding state and the nonlinearity of the global behavior was constructed, as loading was increased, the cylinder was found to first yield at a specific point after which a yielding core formed and propagated. Before the yielding core propagated to the surface of the cylinder, the global behavior of the structure remained linear. After the yielding core propagated to the surface of the cylinder, the global behavior became nonlinear. The correspondence constructed in the paper will be helpful to understand the failure process and to evaluate the carrying capacity of a graphite cylinder subjected to line loading in reactors. (author)