Concept of a new method for fatigue monitoring of nuclear power plant components

International Nuclear Information System (INIS)

Zafosnik, M.; Cizelj, L.

2007-01-01

Fatigue is one of the well-understood aging mechanisms affecting mechanical components in many industrial facilities including nuclear power plants. Operational experience of nuclear power plants worldwide to date confirmed adequate design of safety related components against fatigue. In some cases however, for example when the plant life extension is envisioned, it may be very useful to monitor the remaining fatigue life of safety related components. Nuclear power plants components are classified into safety classes regarding their importance in mitigating the consequences of hypothetic accidents. Service life of components subjected to fatigue loading can be estimated with Usage Factor uk. A concept of the new method aiming both at monitoring the current state of the component and predicting its remaining lifetime in the life-extension conditions is presented. The method is based on determination of partial Usage Factor of components in which operating transients will be considered and compared to design transients. (author)

Development of a slow mono-kinetic electron source; Etude et realisation d'une source d'electrons lents monocinetiques

Energy Technology Data Exchange (ETDEWEB)

Ballu, Y [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

1968-06-01

A comparative study of already existing slow mono-kinetic electron guns shows that those using a 127 degrees electrostatic selector can be improved still further to arrive at the performances obtained with spherical 180 degrees selectors for example. For this reason we have examined the 127 degrees selector theoretically in more detail; it appears that it should be possible to obtain a resolving power better than 30 mV for a current of about 10{sup -10} A, on condition that certain improvements be made to the instrument as normally designed, in particular concerning the entrance and exit slides. As a result, the usual suppressors for the scattered electrons are no longer necessary. The development of this apparatus has been carried out with particular care: the dimensional characteristics are fixed to an accuracy of a few microns, although the instrument can be baked out at 300 C. The experimental results are in excellent agreement with the theoretical predictions: for a current of 10{sup -10} A, the measured resolving power is 24 {+-} 4 mV. The easy detection of the He{sup -} resonance line at 19.3 eV has confirmed the advantages of this apparatus for the study of atomic collisions. (author) [French] L'etude comparative des canons a electrons lents monocinetiques realises jusqu'a present montre que ceux qui utilisent un selecteur electrostatique a 127 degres peuvent etre encore perfectionnes en vue de parvenir aux performances obtenues avec les selecteurs spheriques a 180 degres par exemple. D'ou notre etude theorique approfondie du selecteur a 127 degres qui nous a conduit a esperer une resolution meilleure que 30 mV pour un courant de l'ordre de 10{sup -10} A a condition d'apporter certaines ameliorations a la conception usuelle de cet instrument notamment au niveau des fentes d'entree et de sortie. Par voie de consequence les suppresseurs habituels d'electrons parasites deviennent inutiles. L'etude et la mise au point de l'appareil ont fait l'objet de soins

Use of the local-global concept in detecting component vibration in reactors

International Nuclear Information System (INIS)

Al-Ammar, M.A.

1981-01-01

The local-global concept, based on the detector adjoint function, was used to develop the response of a detector to an absorber vibrating in one dimension. A one-dimensional two-group diffusion code was developed to calculate the frequency dependent detector response as a function of detector and absorber positions for the coupled-core UTR-10 reactor. Results from this code indicated the best possible detector and absorber locations, where more detailed calculations were made using a two-group, three-dimensional diffusion code with finite detector and absorber volumes. An experiment was then designed, for the chosen positions, using a vibrating cadmium absorber with a detector on each side. The assembly was placed in the vertical central stringer of the reactor. Investigations were carried out for vibrations in two flux gradients and experimental data were analyzed in the frequency domain using a microcomputer-based data acquisition system. The experimental investigation showed the validity of the local-global concept. A normalized outputs cross power spectral density was developed that correctly predicted the different flux tilts in the two flux gradients. It was also shown that the frequency response of the local component had a wide plateau region. Monitoring the behavior of the normalized cross power spectral density was thought to be a promising indicator for the detection and localization of malfunctioning vibrating components. It might also be used to detect flux irregularities in the vicinity of a vibrating component

A systematic concept of assuring structural integrity of components and parts for applying to highly ductile materials through brittle material

International Nuclear Information System (INIS)

Suzuki, Kazuhiko

2007-09-01

Concepts of assuring structural integrity of plant components have been developed under limited conditions of either highly ductile or brittle materials. There are some cases where operation in more and more severe conditions causes a significant reduction in ductility for materials with a high ductility before service. Use of high strength steels with relatively reduced ductility is increasing as industry applications. Current concepts of structural integrity assurance under the limited conditions of material properties or on the requirement of no significant changes in material properties even after long service will fail to incorporate expected technological innovations. A systematic concept of assuring the structural integrity should be developed for applying to highly ductile materials through brittle materials. Objectives of the on-going research are to propose a detail of the systematic concept by considering how we can develop the concept without restricting materials and for systematic considerations on a broad range of material properties from highly ductile materials through brittle materials. First, background of concepts of existing structural codes for components of highly ductile materials or for structural parts of brittle materials are discussed. Next, issues of existing code for parts of brittle materials are identified, and then resolutions to the issues are proposed. Based on the above-mentioned discussions and proposals, a systematic concept is proposed for application to components with reduced ductility materials and for applying to components of materials with significantly changing material properties due to long service. (author)

English Department Reforms at the Hautes Etudes Commerciales: Entering the Nineties.

Science.gov (United States)

Shanahan, Daniel

1993-01-01

Discusses the reforms made in the fall of 1990 in the English department at the Ecole Hautes Etudes Commerciales (Paris, France), which were based on the basis of a combination of literature-culture and second- and foreign-language acquisition pedagogical biases. (four references) (VWL)

98 Etude Comparative du Systeme Phonematique et Tonal des ...

African Journals Online (AJOL)

98. Etude Comparative du Systeme Phonematique et Tonal des. Deux Parlers: Le Yoruba du Nigeria et L'itsa Parle en. Republique du Benin. Ajani Akinwumi Lateef et Ayuba G. Ajibabi http://dx.doi./org/10.4314/ujah.v18i3.5. Résume. En ce début de l'époque ou la mondialisation et la coexistence des peuples dans le ...

Magnetic resonance studies of solid polymers; Etude des polymeres solides par resonance magnetique

Energy Technology Data Exchange (ETDEWEB)

Lenk, R [Commissariat a l' Energie Atomique, Grenoble (France). Centre d' Etudes Nucleaires

1969-07-01

This paper is a review of the application of nuclear magnetic resonance (NMR) to solid polymers. In the first, theoretical part, the elements of the theory of NMR, which are necessary for the study of the properties of solid polymers are discussed: the moments method, nuclear relaxation and the distribution of correlation times. In the second part the experimental results are presented. (author) [French] Cette etude est une recherche bibliographique sur l'application de la resonance magnetique nucleaire (RMN) aux polymeres solides. Dans la premiere partie theorique on discute les elements de la theorie de RMN, necessaires pour l'etude des proprietes des polymeres solides: la methode des moments, la relaxation nucleaire et la distribution des temps de correlation. La deuxieme partie presente les resultats des experiences. (auteur)

Generalities on the dynamic behaviour of rapid reactors. Preliminary studies on Rapsodie; Generalites sur le comportement dynamique des piles rapides. Etudes preliminaires de rapsodie

Energy Technology Data Exchange (ETDEWEB)

Campan, J L; Chaumont, J P; Clauzon, P P; Ghesquiere, G; Leduc, J; Schmitt, A P; Zaleski, C P [Commissariat a l' Energie Atomique, Cadarache (France). Centre d' Etudes Nucleaires

1963-07-01

The study of the dynamic behaviour of fast reactors may be divided into three section: 1. Stability studies around equilibrium power only the linear case was examining. S. Transient studies in the case of usual reactor operation (shut down, scram, etc.) with thermal shocks evaluation, for instance. 3. Explosion studies, for the maximum credible accidents. This report presents the status of the studies performed at the 'Physics Research Department' at Cadarache. Methods used are detailed and illustrated with the results obtained on a preliminary metallic core of the Rapsodie Reactor. (authors) [French] Le comportement dynamique des piles rapides, se presente tout naturellement sous trois aspects: 1. Etude de stabilite autour d'un regime d'equilibre (nous nous sommes bornes ici au cas lineaire). 2. Etude de regimes transitoires lors des operations normales de pile (arret, arret d'urgence, etc.) avec evaluation des chocs thermiques par exemple. 3. Etude des regimes transitoires de caractere explosif lors des accidents les plus graves possibles. Ce rapport presente l'etat des etudes a la date du 20 decembre 1961 a la Section d'Etudes de Piles Rapides a CADARACHE. Les methodes employees ont ete detaillees et illustrees a partir des resultats obtenus sur une premiere version 'combustible metallique' de Rapsodie. (auteurs)

Structural health monitoring of power plant components based on a local temperature measurement concept

International Nuclear Information System (INIS)

Rudolph, Juergen; Bergholz, S.; Hilpert, R.; Jouan, B.; Goetz, A.

2012-01-01

The fatigue assessment of power plant components based on fatigue monitoring approaches is an essential part of the integrity concept and modern lifetime management. It is comparable to structural health monitoring approaches in other engineering fields. The methods of fatigue evaluation of nuclear power plant components based on realistic thermal load data measured on the plant are addressed. In this context the Fast Fatigue Evaluation (FFE) and Detailed Fatigue Calculation (DFC) of nuclear power plant components are parts of the three staged approach to lifetime assessment and lifetime management of the AREVA Fatigue Concept (AFC). The three stages Simplified Fatigue Estimation (SFE), Fast Fatigue Evaluation (FFE) and Detailed Fatigue Calculation (DFC) are characterized by increasing calculation effort and decreasing degree of conservatism. Their application is case dependent. The quality of the fatigue lifetime assessment essentially depends on one hand on the fatigue model assumptions and on the other hand on the load data as the basic input. In the case of nuclear power plant components thermal transient loading is most fatigue relevant. Usual global fatigue monitoring approaches rely on measured data from plant instrumentation. As an extension, the application of a local fatigue monitoring strategy (to be described in detail within the scope of this paper) paves the way of delivering continuously (nowadays at a frequency of 1 Hz) realistic load data at the fatigue relevant locations. Methods of qualified processing of these data are discussed in detail. Particularly, the processing of arbitrary operational load sequences and the derivation of representative model transients is discussed. This approach related to realistic load-time histories is principally applicable for all fatigue relevant components and ensures a realistic fatigue evaluation. (orig.)

The formation of scientists and technicians at the 'Centre d'Etudes Nucleaires' at Saclay; Formation des scientifiques et des techniciens au Centre d'Etudes Nucleaires de Saclay

Energy Technology Data Exchange (ETDEWEB)

Debiesse, J [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

1958-07-01

The considerable needs in research workers and scientists which are asked by the nuclear energy obliged the Commissariat a l'Energie atomique to deal with a particular effort to increase the quantitative and qualitative formation of scientists. Most various ways have been used. 1- A National Institute of Nuclear Sciences and Nuclear Techniques was created, by a joint decree of the Prime Minister and the Minister for National Education (june 18, 1957). This Institute of Higher Teaching (250 students) indulges in the following matters: atomic engineering, quantum mechanics, theory and technic of particle accelerators, special metallurgy, radiobiology, thermic and mechanics of fluids. 2- An associated centre of the 'Conservatoire National des Arts et Metiers' waeated (200 students) for technical assistants, drawers, etc. 3- In contribution with both electronic industry and Ministry of Work, the Centre d'Etudes Nucleaires contributes to an accelerated formation of technical assistants into Professional Centres. Conclusion: Training of scientists and research workers is one of the most important activities of the Centre d'Etudes Nucleaires de Saclay. Without losing its technical efficiency, it has supplied and varied means adapted to the various purposes that we shall reach. (author)Fren. [French] Les besoins considerables actuels et previsibles en chercheurs et scientifiques necessites par l'avevement de l'energie nucleaire imposaient au Commissariat a I'Energie atomique un effort particulier pour augmenter la formation quantitative et qualitative des scientifiques. Les moyens les plus divers ont ete mis en oeuvre: 1- Creation de l'Institut National des Sciences et Techniques Nucleaires par decret de la Presidence du Conseil et de l'Education Nationale en date du 18.6.57. Cet Institut d'Enseignement Superieur (250 etudiants) donne des cours en: genie atomique, mecanique quantique, theorie et technique des Accelerateurs de particules, metallurgie speciale, radiobiologie

Etude de la qualité physico-chimique et biologique des eaux du ...

African Journals Online (AJOL)

Etude de la qualité physico-chimique et biologique des eaux du fleuve Niger à Niamey. ... le récepteur principal des rejets d'eaux usées de la ville de Niamey, capital du ... La description de ces taxons montre une variation de la structure des ...

186 Etude théorique du transport électronique par la simulation ...

African Journals Online (AJOL)

youness

Choukria SAYAH et al. 186. Etude théorique du ... For that we carried out the microscopic simulations, based on the Monte. Carlo method. ... intervalles, piezoelectric as well as the interactions of alloy and on ionized impurities. ..... SAYA et al. 198. [5] - R. W. Hockney, J. W. Eastwood, "Computer simulation using particles",.

The COD concept and its application to fracture mechanical evaluation of cracked components

International Nuclear Information System (INIS)

Kockelmann, H.

1984-01-01

Based on a comprehensive literature study, this report critically evaluates the current state of experiences with the COD concept in fracture mechanics. First the concept is explained and the procedure of materials testing with a view to fracture mechanics is discussed in detail with emphasis on: The definition of crack shape modification; the procedure to detect crack modification, with subsequent comparison; the determination of material characteristics; the impact on the characteristics of the crack tip opening and the dispersion of results. The correlation between crack tip opening characteristics and notch impact strength is explained, and the methods applied for analysis of the streses affecting the structural components are shown. The design-based and failure threshold curves and the treatment of real crack geometries are also discussed. Problems still to be solved are shown. (orig./HP) [de

Study of the tributyl phosphate - 30% dodecane solvent; Etude du solvant phosphate tributylique - 30 % dodecane

Energy Technology Data Exchange (ETDEWEB)

Leroy, P [Commissariat a l' Energie Atomique, Fontenay-aux-Roses. Centre d' Etudes Nucleaires, 92 (France)

1967-07-01

This study, originating mainly from a literature survey, gives the principal chemical and physical features of the tributyl-phosphate (TBP) agent diluted at 30 volumes per cent in dodecane. The mixture is a very commonly used extractant in nuclear fuel processing. In this paper, the main following points are reported: -) the components (TBP and diluents) -) the TBP-diluents systems (non-loaded), -) the TBP-diluents-water systems, -) TBP-diluents-water-nitric acid systems, and -) industrial solvents. (author) [French] Cette etude, d'origine bibliographique, regroupe les caracteristiques physico-chimiques essentielles du phosphate tributylique (TBP) dilue a 30% en volume dans du dodecane. Ce melange constitue un agent d'extraction tres utilise dans le traitement des combustibles nucleaires. Les principaux points traites sont les suivants: -) les constituants (TBP et diluants), -) les systemes TBP-diluants non charges, -) les systemes TBP-diluants-eau, -) les systemes TBP-diluants-eau-acide nitrique, et -) les solvants industriels. (auteur)

Study and installation of concrete shielding in the civil engineering of nuclear construction (1960); Etude et mise en place des betons de protection dans le genie civil des ouvrages nucleaires (1960)

Energy Technology Data Exchange (ETDEWEB)

Dubois, F [Commissariat a l' Energie Atomique, Saclay (France).Centre d' Etudes Nucleaires

1960-07-01

The object of this report is to give technical information about high density concretes which have become very important for radiation biological shielding. The most generally used heavy aggregates (barytes, ilmenite, ferrophosphorus, limonite, magnetite and iron punching) to make these concretes are investigated from the point of view prospecting and physical and chemical characteristics. At first, a general survey of shielding concretes is made involving the study of components, mixing and placing methods, then, a detailed investigation of some high density concretes: barytes concrete, with incorporation of iron punching or iron shot, ferrophosphorus concrete, ilmenite concrete and magnetite concrete, more particularly with regard to grading and mix proportions and testing process. To put this survey in concrete form, two practical designs are described such as they have been carried out at the Saclay Nuclear Station. Specifications are given for diverse concretes and for making the proton-synchrotron 'Saturne' shielding blocks. (author) [French] Ce rapport a pour objet de donner des precisions techniques au sujet des betons a haute densite qui ont pris une grande importance pour la protection biologique contre les rayonnements. Les agregats lourds les plus couramment utilises (barytine, ilmenite, ferrophosphore, limonite, magnetite et riblons) pour la fabrication de ces betons, sont examines du point de vue prospection et caracteristiques physiques et chimiques. On procede d'abord a une etude generale des betons de protection comprenant l'etude des constituants, de la confection et de la mise en place, ensuite, a un examen detaille de quelques betons a haute densite: betons a base de barytine, avec incorporation de riblons ou de grenaille de fonte, betons au ferrophosphore, a base d'ilmenite ou de magnetite, notamment en ce qui concerne la granulometrie, la composition, le dosage et les processus d'essais. Pour concretiser ces etudes, deux applications pratiques

152 Etude de cas sur l'impact des amendements organiques vis-à ...

African Journals Online (AJOL)

john mukalay

Etude de cas sur l'impact des amendements organiques vis-à-vis de la salinité en culture de bananier. Michel Mazinga KWEY1, Séverin Kalala BANZE2 et John Banza MUKALAY2*. 1Laboratoire des cultures in vitro, Département de phytotechnie, Faculté des sciences agronomiques,. Université de Lubumbashi, BP 1825, ...

Process Chain for the Manufacture of Polymeric Tubular Micro-Components and “POLYTUBES Micro-Factory” Concept

DEFF Research Database (Denmark)

Qin, Yi; Perzon, Erik; Chronakis, Ioannis S.

The paper presents a process chain for the shaping of poly-meric tubular micro-components for the volume production as well as presents a concept for the integration of the developed processes and modular machines onto a platform to form a "POLYTUBES Micro-Factory", being resulting from the Europ...

Etude comparative de la flore aux abords des cours d'eau dans les ...

African Journals Online (AJOL)

Etude comparative de la flore aux abords des cours d'eau dans les zones hypo et hyper endémiques d'ulcère de Buruli en Côte d'Ivoire. C. Cisse Boni, E. Ehouman, D. Soro, M.W. Kone, A. Bakayoko, F. Dembele, K. Bauthire, M Dosso ...

Runtime Concepts of Hierarchical Software Components

Czech Academy of Sciences Publication Activity Database

Bureš, Tomáš; Hnětynka, P.; Plášil, František

2007-01-01

Roč. 8, special (2007), s. 454-463 ISSN 1525-9293 R&D Projects: GA AV ČR 1ET400300504 Institutional research plan: CEZ:AV0Z10300504 Keywords : component-based development * hierarchical components * connectors * controlers * runtime environment Subject RIV: JC - Computer Hardware ; Software

Concepts of formal concept analysis

Science.gov (United States)

Žáček, Martin; Homola, Dan; Miarka, Rostislav

2017-07-01

The aim of this article is apply of Formal Concept Analysis on concept of world. Formal concept analysis (FCA) as a methodology of data analysis, information management and knowledge representation has potential to be applied to a verity of linguistic problems. FCA is mathematical theory for concepts and concept hierarchies that reflects an understanding of concept. Formal concept analysis explicitly formalizes extension and intension of a concept, their mutual relationships. A distinguishing feature of FCA is an inherent integration of three components of conceptual processing of data and knowledge, namely, the discovery and reasoning with concepts in data, discovery and reasoning with dependencies in data, and visualization of data, concepts, and dependencies with folding/unfolding capabilities.

Study of electron groupings in the Saclay linear accelerator; Etude du groupement des electrons dans l'accelerateur lineaire de Saclay

Energy Technology Data Exchange (ETDEWEB)

Bergere, R; Veyssiere, A; Beil, H [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

1965-07-01

The classical theory of the linear accelerator buncher does not fit the experimental measurements of the shape of the bunch of electrons performed at Saclay by the method of the energy spectrum. If the spurious effect of the mode converter at the input of the linac is taken into account the theory can fit the experimental results and also explain the variations of the phase of the bunch on the accelerating sine wave. (authors) [French] Une etude classique du groupeur en tete de l'Accelerateur Lineaire de Saclav conduit a des resultats incompatibles avec les resultats experimentaux obtenus sur le groupement des electrons par l'etude du spectre des frequences rayonnees par le faisceau d'electrons ou par l'etude des spectres en energie. Par contre si l'effet parasite du convertisseur de mode a l'entree de l'accelerateur est pris en consideration les resultats theoriques coincident bien avec les resultats experimentaux et permettent en outre d'expliquer les variations du calage en phase des paquets elementaires d'electrons. (auteurs)

Study of workplace: concept and practical application; Etude de postes de travail: le concept et sa traduction en pratique

Energy Technology Data Exchange (ETDEWEB)

Varin, J.C.; Casanova, P.; Benjamin, P.; Rey, M. [COGEMA La Hague, 50 - Beaumont Hague (France)

2006-04-15

The order in council published in March 2003 deals with the radiation protection of workers. It completes the French regulation of risks prevention. In this text appears a new item called 'study of workplace'. This new concept does not deal only with radiation risks: in a risks management organization, this concept must be a complementary disposition of the existing procedures. In the La Hague plant, a risks management policy has been developed for many years in respect with OHSAS 18001 referential. This risks management system involves all the departments which work in the risks prevention field: safety department, radiation protection department, health department. Many procedures and quality assurance tools have been crated which comply with the concept of 'work place study'. (author)

Le recours aux modeles dans l'enseignement de la biologie au secondaire : Conceptions d'enseignantes et d'enseignants et modes d'utilisation

Science.gov (United States)

Varlet, Madeleine

Le recours aux modeles et a la modelisation est mentionne dans la documentation scientifique comme un moyen de favoriser la mise en oeuvre de pratiques d'enseignement-apprentissage constructivistes pour pallier les difficultes d'apprentissage en sciences. L'etude prealable du rapport des enseignantes et des enseignants aux modeles et a la modelisation est alors pertinente pour comprendre leurs pratiques d'enseignement et identifier des elements dont la prise en compte dans les formations initiale et disciplinaire peut contribuer au developpement d'un enseignement constructiviste des sciences. Plusieurs recherches ont porte sur ces conceptions sans faire de distinction selon les matieres enseignees, telles la physique, la chimie ou la biologie, alors que les modeles ne sont pas forcement utilises ou compris de la meme maniere dans ces differentes disciplines. Notre recherche s'est interessee aux conceptions d'enseignantes et d'enseignants de biologie au secondaire au sujet des modeles scientifiques, de quelques formes de representations de ces modeles ainsi que de leurs modes d'utilisation en classe. Les resultats, que nous avons obtenus au moyen d'une serie d'entrevues semi-dirigees, indiquent que globalement leurs conceptions au sujet des modeles sont compatibles avec celle scientifiquement admise, mais varient quant aux formes de representations des modeles. L'examen de ces conceptions temoigne d'une connaissance limitee des modeles et variable selon la matiere enseignee. Le niveau d'etudes, la formation prealable, l'experience en enseignement et un possible cloisonnement des matieres pourraient expliquer les differentes conceptions identifiees. En outre, des difficultes temporelles, conceptuelles et techniques peuvent freiner leurs tentatives de modelisation avec les eleves. Toutefois, nos resultats accreditent l'hypothese que les conceptions des enseignantes et des enseignants eux-memes au sujet des modeles, de leurs formes de representation et de leur approche

Comparison of multipoint linkage analyses for quantitative traits in the CEPH data: parametric LOD scores, variance components LOD scores, and Bayes factors.

Science.gov (United States)

Sung, Yun Ju; Di, Yanming; Fu, Audrey Q; Rothstein, Joseph H; Sieh, Weiva; Tong, Liping; Thompson, Elizabeth A; Wijsman, Ellen M

2007-01-01

We performed multipoint linkage analyses with multiple programs and models for several gene expression traits in the Centre d'Etude du Polymorphisme Humain families. All analyses provided consistent results for both peak location and shape. Variance-components (VC) analysis gave wider peaks and Bayes factors gave fewer peaks. Among programs from the MORGAN package, lm_multiple performed better than lm_markers, resulting in less Markov-chain Monte Carlo (MCMC) variability between runs, and the program lm_twoqtl provided higher LOD scores by also including either a polygenic component or an additional quantitative trait locus.

A space Fresnel imager concept assessment study led by CNES for astrophysical applications

Science.gov (United States)

Hinglais, Emmanuel

2011-06-01

In 2009, the Centre National d'Etudes Spatiales (CNES) carried out an assessment study on a "Fresnel telescope" concept based on a two-spacecraftformation flying configuration. This concept uses a binary Fresnel zone plate, and the principle of diffraction focusing, which allows high resolution optical imaging for astrophysics. In addition to CNES, the Laboratoire d'Astrophysique de Toulouse Tarbes (LATT) was deeply involved at two levels: through Research & Technology (R&T) studies to simulate and validate on a test bench the Fresnel concept performance, and through active participation in the CNES team for the optical aspects and to define the astrophysical fields of Fresnel-based space missions. The study was conducted within the technical limitations that resulted from a compromise between the R&T state of the art and the potential scientific domains of interest. The main technical limitations are linked to the size of the primary Fresnel array and to its usable spectral bandwidth. In this framework, the study covers ambitious architectures, correlating the technology readiness of the main critical components with the time-scale and programmatic horizons. The possible scientific topics arise from this range of missions. In this paper, I present a mission launched by a Soyuz, dedicated to astrophysics in the Ultra Violet (UV) band: 120 to 300 nm using a 4-m Fresnel array. It could be competitive in the next fifteen years, whereas a 10-m aperture mission in different bands; UV, visible or Infra Red (IR) (up to 6 μm) could be achievable in the future. Larger missions, using a primary array larger than 20 m, request technologies not yet available but that will probably be based on new inflatable structures with membranes, as already tested in the USA for other ends.

Mars Science Laboratory Using Laser Instrument, Artist's Concept

Science.gov (United States)

2007-01-01

This artist's conception of NASA's Mars Science Laboratory portrays use of the rover's ChemCam instrument to identify the chemical composition of a rock sample on the surface of Mars. ChemCam is innovative for planetary exploration in using a technique referred to as laser breakdown spectroscopy to determine the chemical composition of samples from distances of up to about 8 meters (25 feet) away. ChemCam is led by a team at the Los Alamos National Laboratory and the Centre d'Etude Spatiale des Rayonnements in Toulouse, France. Mars Science Laboratory, a mobile robot for investigating Mars' past or present ability to sustain microbial life, is in development at NASA's Jet Propulsion Laboratory for a launch opportunity in 2009. The mission is managed by JPL, a division of the California Institute of Technology, Pasadena, Calif., for the NASA Science Mission Directorate, Washington.

Intensely irradiated steel components: Plastic and fracture properties, and a new concept of structural design criteria for assuring the structural integrity

International Nuclear Information System (INIS)

Suzuki, Kazuhiko; Jitsukawa, Shiro; Okubo, Nariaki; Takada, Fumiki

2010-01-01

In order to develop a systematic and reasonable concept assuring the structural integrity of components under intense neutron irradiation, two basic tensile properties, true stress-true strain (TS-TS) curves and fracture strain, were investigated on an austenitic stainless steel and martensitic steel. Application of Swift equation is confirmed to a large plastic strain range of TS-TS curves. Fracture strain ε f data were well correlated as ε f + ε 0 = const. where ε 0 is the pre-strain representing the irradiation hardening. Based on those formulations and available experimental information, several critical issues to be dealt with in developing the concept were identified possible reduction in ductility, significant change in mechanical properties, remarkable cyclic softening and other unique cyclic properties observed during a high-cycle fatigue testing, and the redundancy of the plastic collapse concept to bending. Existing structural codes are all based on the assumption that there will be no significant changes in mechanical properties during operation, and of high ductility. Therefore, a new concept for assuring structural integrity is required for application not only to components with high ductility but also components with reduced ductility. First, potential failure modes were identified, and a new and systematic concept was proposed for preventing these modes of failure, introducing a new concept of categorizing the loadings by stability of deformation process to fracture (as type F and M loadings). Based on the basic concept, a detailed concept of how to protect against ductile fracture was given, and loading type-dependent limiting parameters were set. Finally, application of the detailed concept was presented, especially on determination of loading type (in numerical approach, the formulation of TS-TS curves and fracture strain derived above are needed), and on how to determine the limiting parameters as allowable limits. Experiments were done to

Intensely irradiated steel components: Plastic and fracture properties, and a new concept of structural design criteria for assuring the structural integrity

Energy Technology Data Exchange (ETDEWEB)

Suzuki, Kazuhiko, E-mail: suzuki.kazuhiko@jaea.go.j [Japan Atomic Energy Agency, Nuclear Science and Engineering Directorate, 2-4 Shirane, Shirakata, Tokai-mura, Naka-gun, Ibaraki-ken 319-1195 (Japan); Jitsukawa, Shiro; Okubo, Nariaki [Japan Atomic Energy Agency, Nuclear Science and Engineering Directorate, 2-4 Shirane, Shirakata, Tokai-mura, Naka-gun, Ibaraki-ken 319-1195 (Japan); Takada, Fumiki [Japan Atomic Energy Agency, Department of JMTR Operation, Narita-cho, Oarai-machi, Higashi-ibaraki-gun, Ibaraki-ken 311-1393 (Japan)

2010-06-15

In order to develop a systematic and reasonable concept assuring the structural integrity of components under intense neutron irradiation, two basic tensile properties, true stress-true strain (TS-TS) curves and fracture strain, were investigated on an austenitic stainless steel and martensitic steel. Application of Swift equation is confirmed to a large plastic strain range of TS-TS curves. Fracture strain epsilon{sub f} data were well correlated as epsilon{sub f} + epsilon{sub 0} = const. where epsilon{sub 0} is the pre-strain representing the irradiation hardening. Based on those formulations and available experimental information, several critical issues to be dealt with in developing the concept were identified possible reduction in ductility, significant change in mechanical properties, remarkable cyclic softening and other unique cyclic properties observed during a high-cycle fatigue testing, and the redundancy of the plastic collapse concept to bending. Existing structural codes are all based on the assumption that there will be no significant changes in mechanical properties during operation, and of high ductility. Therefore, a new concept for assuring structural integrity is required for application not only to components with high ductility but also components with reduced ductility. First, potential failure modes were identified, and a new and systematic concept was proposed for preventing these modes of failure, introducing a new concept of categorizing the loadings by stability of deformation process to fracture (as type F and M loadings). Based on the basic concept, a detailed concept of how to protect against ductile fracture was given, and loading type-dependent limiting parameters were set. Finally, application of the detailed concept was presented, especially on determination of loading type (in numerical approach, the formulation of TS-TS curves and fracture strain derived above are needed), and on how to determine the limiting parameters as

Neutronic study of the two french heavy water reactors; Etude neutronique des deux piles francaises a eau lourde

Energy Technology Data Exchange (ETDEWEB)

Horowitz, J [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

1955-07-01

The two french reactors - the reactor of Chatillon, named Zoe, and the reactor of Saclay - P2 - were the object of detailed neutronic studies which the main ideas are exposed in this report. These studies were mostly done by the Department of the Reactor Studies (D.E.P.). We have thus studied the distribution of neutronic fluxes; the factors influencing reactivity; the link between reactivity and divergence with the formula of Nordheim; the mean time life of neutrons; neutron spectra s of P2; the xenon effect; or the effect of the different adjustments of the plates and controls bar. (M.B.) [French] Les deux reacteurs francais - la pile de Chatillon, appelee ZOE, et la pile de Saclay, designee dans la suite par P2 - ont fait l'objet d'etudes neutroniques detaillees dont les principales sont exposees dans ce rapport. Ces etudes ont ete pour la plupart effectuees dans le cadre du Departement des Etudes de Piles (D.E.P.). Nous avons ainsi entre autre etudie la distribution du flux neutronique; les facteurs influencants la reactivite; le lien entre reactivite et divergence par la formule de Nordheim; le temps de vie moyen des neutrons; les spectres de neutrons de P2; l'effet xenon; ou encore l'effet des differents reglages des plaques et barres de controles. (M.B.)

A multi-component and multi-failure mode inspection model based on the delay time concept

International Nuclear Information System (INIS)

Wang Wenbin; Banjevic, Dragan; Pecht, Michael

2010-01-01

The delay time concept and the techniques developed for modelling and optimising plant inspection practices have been reported in many papers and case studies. For a system comprised of many components and subject to many different failure modes, one of the most convenient ways to model the inspection and failure processes is to use a stochastic point process for defect arrivals and a common delay time distribution for the duration between defect the arrival and failure of all defects. This is an approximation, but has been proven to be valid when the number of components is large. However, for a system with just a few key components and subject to few major failure modes, the approximation may be poor. In this paper, a model is developed to address this situation, where each component and failure mode is modelled individually and then pooled together to form the system inspection model. Since inspections are usually scheduled for the whole system rather than individual components, we then formulate the inspection model when the time to the next inspection from the point of a component failure renewal is random. This imposes some complication to the model, and an asymptotic solution was found. Simulation algorithms have also been proposed as a comparison to the analytical results. A numerical example is presented to demonstrate the model.

Study and installation of concrete shielding in the civil engineering of nuclear construction (1960); Etude et mise en place des betons de protection dans le genie civil des ouvrages nucleaires (1960)

Energy Technology Data Exchange (ETDEWEB)

Dubois, F. [Commissariat a l' Energie Atomique, Saclay (France).Centre d' Etudes Nucleaires

1960-07-01

The object of this report is to give technical information about high density concretes which have become very important for radiation biological shielding. The most generally used heavy aggregates (barytes, ilmenite, ferrophosphorus, limonite, magnetite and iron punching) to make these concretes are investigated from the point of view prospecting and physical and chemical characteristics. At first, a general survey of shielding concretes is made involving the study of components, mixing and placing methods, then, a detailed investigation of some high density concretes: barytes concrete, with incorporation of iron punching or iron shot, ferrophosphorus concrete, ilmenite concrete and magnetite concrete, more particularly with regard to grading and mix proportions and testing process. To put this survey in concrete form, two practical designs are described such as they have been carried out at the Saclay Nuclear Station. Specifications are given for diverse concretes and for making the proton-synchrotron 'Saturne' shielding blocks. (author) [French] Ce rapport a pour objet de donner des precisions techniques au sujet des betons a haute densite qui ont pris une grande importance pour la protection biologique contre les rayonnements. Les agregats lourds les plus couramment utilises (barytine, ilmenite, ferrophosphore, limonite, magnetite et riblons) pour la fabrication de ces betons, sont examines du point de vue prospection et caracteristiques physiques et chimiques. On procede d'abord a une etude generale des betons de protection comprenant l'etude des constituants, de la confection et de la mise en place, ensuite, a un examen detaille de quelques betons a haute densite: betons a base de barytine, avec incorporation de riblons ou de grenaille de fonte, betons au ferrophosphore, a base d'ilmenite ou de magnetite, notamment en ce qui concerne la granulometrie, la composition, le dosage et les processus d'essais. Pour concretiser ces

A microcosm of musical expression: II. Quantitative analysis of pianists' dynamics in the initial measures of Chopin's Etude in E major.

Science.gov (United States)

Repp, B H

1999-03-01

Patterns of expressive dynamics were measured in bars 1-5 of 115 commercially recorded performances of Chopin's Etude in E major, op. 10, No. 3. The grand average pattern (or dynamic profile) was representative of many performances and highly similar to the average dynamic profile of a group of advanced student performances, which suggests a widely shared central norm of expressive dynamics. The individual dynamic profiles were subjected to principal components analysis, which yielded Varimax-rotated components, each representing a different, nonstandard dynamic profile associated with a small subset of performances. Most performances had dynamic patterns resembling a mixture of several components, and no clustering of of performances into distinct groups was apparent. Some weak relationships of dynamic profiles with sociocultural variables were found, most notably a tendency of female pianists to exhibit a greater dynamic range in the melody. Within the melody, there were no significant relationships between expressive timing [Repp, J. Acoust. Soc. Am. 104, 1085-1100 (1998)] and expressive dynamics. These two important dimensions seemed to be controlled independently at this local level and thus offer the artist many degrees of freedom in giving a melody expressive shape.

Etude de l'impact de la variation de la température sur les activités ...

African Journals Online (AJOL)

Etude de l'impact de la variation de la température sur les activités microbiennes : application à une population de Listeria monocytogenes CIP 7831, Listeria monocytogenes Scott A CIP 103575 et Escherichia coli ATCC 25922.

Theoretical study, and construction, of a spherical electrostatic beta spectrometer; Etude theorique et realisation d'un spectrometre beta electrostatique spherique

Energy Technology Data Exchange (ETDEWEB)

Moret, R [Commissariat a l' Energie Atomique, Grenoble (France). Centre d' Etudes Nucleaires

1964-03-15

After a literature survey showing the importance of an electrostatic spectrometer with spherical electrodes for studying disintegration processes, the theoretical characteristics of such an apparatus are derived (determination of the trajectory equations calculation of the transmission and of the resolving power the case of a point source and of an extended source). The apparatus built as a result of these calculations is described. The electrostatic field distribution outside the electrodes is derived. As well as giving electron spectra ({beta} disintegration and conversion electrons) the apparatus make s it possible to study e-{gamma}, e-{beta}, e-e-{gamma} and e-e-{beta} coincidences. In the last part are given experimental characteristics and the results of the first measurements made on conversion electron spectra ({sup 161}Tb, {sup 151}Pm, {sup 155}Eu) and on coincidences ({sup 170}Tm) using this spectrometer. (author) [French] Apres une etude bibliographique montrant l'interet que presente un spectrometre electrostatique a electrodes spheriques pour l'etude des schemas de desintegration, l'auteur etablit les caracteristiques theoriques d'un tel appareil (determination de l'equation des trajectoires calcul de la transmission et du pouvoir de resolution cas d'une source ponctuelle et d'une source etendue). On decrit l'appareil realise d'apres ces calculs. On etablit la repartition du champ electrostatique a l'exterieur des electrodes. Outre le trace des spectres d'electrons (desintegration {beta} et electrons de conversion), l'appareil permet l'etude de coincidences e-{gamma}, e-{beta}, e-e-{gamma} and e-e-{beta}. Dans la derniere partie, sont donnees les caracteristiques experimentales et les premieres etudes de spectres d'electrons de conversion ({sup 161}Tb, {sup 151}Pm, {sup 155}Eu) et de coincidences ({sup 170}Tm) faites a l'aide de ce spectrometre. (auteur)

Some techniques for studying actomyosin by electron microscopy; Quelques techniques d'etude de l'actomyosine par microscopie electronique

Energy Technology Data Exchange (ETDEWEB)

Herzberg, M [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires. Departement de Biologie

1967-07-01

A method has been developed for shadowing using a platinum-carbon alloy; it has been applied to the study of the interaction of actomyosin with its substrate ATP. The results obtained seem to favour the hypothesis of a dissociation of the actomyosin into its two components: actin and myosin. Pictures have been obtained showing particles resembling non-polymerized myosin but no rigorous proof of this exists. (author) [French] Une methode d'ombrage par un alliage de platine et carbone a ete mise au point et appliquee a l'etude de l'interaction de l'actomyosine et de son substrat l'ATP. Les resultats obtenus semblent pencher en faveur de la these d'une dissociation de l'actomyosine en ses deux constituants: l'actine et la myosine. Des images ont ete obtenues montrant des particules dont l'identite avec la myosine non polymerisee reste a demontrer plus rigoureusement. (auteur)

Point-of-care ultrasonography adoption in Canada: using diffusion theory and the Evaluation Tool for Ultrasound skills Development and Education (ETUDE).

Science.gov (United States)

Woo, Michael Y; Frank, Jason R; Lee, A Curtis

2014-09-01

Point-of-care ultrasonography (PoCUS) first appeared in the 1980s in North America, but the extent of the diffusion of its adoption is unknown. We characterized early PoCUS adoption by emergency physicians in Canada and its barriers to use using Rogers' diffusion of innovations theory. We developed a questionnaire based on a pilot study and literature review to assess past, current, and potential use of PoCUS and potential barriers to adoption. A Dillman technique for electronic surveys was used for dissemination. Using Rogers' diffusion of innovations theory, we developed and validated the Evaluation Tool for Ultrasound skills Development and Education (ETUDE). ETUDE scores allowed categorization of respondents into innovators, early adopters, majority, and nonadopters. Descriptive statistics, correlations, and χ² statistics were used to analyze the data. The 296 respondents (36.4% of 814 surveyed) had a median age of 40 and were 72.5% male. Adoption scores using ETUDE revealed nonadopters (18.8%), majority (28.7%), early adopters (34.5%), and innovators (18.0%). Respondents endorsed "always" using PoCUS currently and in the future for focused assessment with sonography in trauma (FAST) (current 41.8%/future 88.4%), first trimester pregnancy (current 23.3%/future 73.7%), suspected abdominal aortic aneurysm (current 32.7%/future 92.6%), basic cardiac indications (current 30.7%/future 87.5%), and central venous catheterization (current 17.0%/future 80.3%). Several barriers to PoCUS were identified for part-time emergency physicians and those working in inner-city/urban/suburban settings. This is the first study to determine the state of adoption and barriers to the introduction of PoCUS in Canadian emergency medicine practice. The novel validated ETUDE instrument should be used to evaluate the uptake of PoCUS over time.

Experimental study of an ion cyclotron instability in a magnetic well confined plasma; Etude experimentale d'une instabilite cyclotronique ionique dans un plasma confine dans un puits magnetique

Energy Technology Data Exchange (ETDEWEB)

Brossier, P [Commissariat a l' Energie Atomique, Fontenay-Aux-Roses (France). Centre d' Etudes Nucleaires

1969-07-01

This report is a contribution to the study of microinstabilities in macroscopically stable plasmas, in the low-{beta} limit. Ion cyclotron instabilities, with k{sub ||} = 0, have been numerically studied in detail; the computation of the density thresholds and growth rates of the different harmonics showed the relative role played by the following energy sources: density gradient, perpendicular distribution function and cold plasma component. This theoretical model has been compared with the results of a detailed study (density thresholds, wave structure, frequency spectrum, wavelengths, growth rate, amplitude of the electric field) of the instability observed in the DECA II device. This comparison gave a good agreement which shows the destabilising role played by the cold plasma component on a hot plasma with a loss cone distribution function. (author) [French] Ce rapport est une contribution a l'etude des microinstabilites dans les plasmas macroscopiquement stables, dans la limite des {beta} << 1. Les instabilites cyclotroniques ioniques, a k{sub ||} = 0, ont ete etudiees numeriquement en detail; le calcul des seuils de densite et taux de croissance des differents harmoniques a permis de preciser l'importance relative des facteurs destabilisants suivants: gradient de densite, fonction de distribution perpendiculaire, presence de plasma froid. Ce modele theorique a ete confronte avec les resultats d'une etude detaillee (seuils de densite, structure de l'onde, spectres de frequence, longueurs d'onde, taux de croissance, amplitude du champ electrique) de l'instabilite observee dans l'experience DECA II, Cette confrontation aboutit a un accord satisfaisant qui montre le role destabilisant joue par le plasma froid sur un plasma chaud presentant une distribution de cone de pertes. (auteur)

The formation of scientists and technicians at the 'Centre d'Etudes Nucleaires' at Saclay

International Nuclear Information System (INIS)

Debiesse, J.

1958-01-01

The considerable needs in research workers and scientists which are asked by the nuclear energy obliged the Commissariat a l'Energie atomique to deal with a particular effort to increase the quantitative and qualitative formation of scientists. Most various ways have been used. 1- A National Institute of Nuclear Sciences and Nuclear Techniques was created, by a joint decree of the Prime Minister and the Minister for National Education (june 18, 1957). This Institute of Higher Teaching (250 students) indulges in the following matters: atomic engineering, quantum mechanics, theory and technic of particle accelerators, special metallurgy, radiobiology, thermic and mechanics of fluids. 2- An associated centre of the 'Conservatoire National des Arts et Metiers' was created (200 students) for technical assistants, drawers, etc. 3- In contribution with both electronic industry and Ministry of Work, the Centre d'Etudes Nucleaires contributes to an accelerated formation of technical assistants into Professional Centres. Conclusion: Training of scientists and research workers is one of the most important activities of the Centre d'Etudes Nucleaires de Saclay. Without losing its technical efficiency, it has supplied and varied means adapted to the various purposes that we shall reach. (author) [fr

Bio-metric study of pig karyotype; Etude biometrique du caryotype du porc

Energy Technology Data Exchange (ETDEWEB)

Haag, J; Lacourly, N; Nizza, P [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

1969-07-01

This study has a twofold purpose, the former is to determine the swine karyotype as accurately as possible, the latter is to try and develop a method of automatic classification and to show its possibilities and limits. (authors) [French] Cette etude a un double objet: d'une part, de definir de la facon aussi precise que possible le caryotype du porc et d'autre part, de tenter une methode de classification automatique et d'en montrer les possibilites ainsi que les limites. (auteurs)

The concept of the pedagogical system of the higher technical educational establishment: essential characteristics of its components

Directory of Open Access Journals (Sweden)

Ольга Петрівна Лучанінова

2016-03-01

Full Text Available The article discusses the essential characteristics of the components of the concept of modern educational system of higher technical educational institutions.We believe that the important role in organization of pedagogical system of the modern higher technical educational establishment belongs to qualitatively new approaches: humanistic and ideological, andragogical, facilitating, personal, cultural, diversificational, cordocentrism, systematic and activity approach, interactive.The concept of pedagogical system will be effective, if the main fundamentals of the Concept are included into the plans of pedagogical work of the higher educational establishments and their structural subdivisions; if the organizational and methodological facilities and studying and generalizing of the experience in organization of the pedagogical activities in the other higher educational establishments are prepared; if the scientific and methodological conferences, seminars, round-table discussion meetings, trainings and so on are organized and held; if we  promote active exchange of the theoretical and methodological aspects of the pedagogical system, of new approaches, forms and methods of the pedagogical activities; if we consider the questions of the Concept implementation at the meetings of the pedagogical work councils, educational and methodological commissions and the like.The offered authors Concept of the pedagogical system of the higher technical educational establishment should help the educators modulate the pedagogical process, involve various institutions and the society to the active participation in the educational and pedagogical process.

Etude cinétique de la dégradation de l'Endosufane en solution ...

African Journals Online (AJOL)

Etude cinétique de la dégradation de l'Endosufane en solution. S Traore, K Mamadou, A Dembele, V Yao, Y Bekro, P Mazellier, B Legube, P Houenou. Abstract. Les pesticides sont fréquemment utilisés en Côte d'Ivoire. Leur détection dans les eaux de forage témoigne de leur mauvais usage et d'un grave problème ...

The use radioactive tracers in the study of solid transport in water streams; Emploi de traceurs radioactifs pour l'etude du transport solide dans les cours d'eau

Energy Technology Data Exchange (ETDEWEB)

Courtois, G [Commissariat a l' Energie Atomique, Saclay (France).Centre d' Etudes Nucleaires; Jaffry, P; Heuzel, M [Laboratoire National d' Hydraulique de Chatou, 78 (France)

1960-07-01

The Laboratoire National d'Hydraulique which has been studying, during the last few years in conjunction with the Centre d'Etudes Nucleaires at Saclay, the development of apparatus and of methods of investigation of sediment transport by radioactive tracer techniques, is at the moment trying to perfect a genuinely quantitative method of investigation. Two experiments have recently been carried out in rivers, the first designed to investigate the transport of pebbles in the river Rhone, the other to investigate the movement of sands in the Niger. This second experiment has been supported by parallel experiments carried out on a reduced scale model of the Niger built at the laboratories of Chatou: in this experiment are used the radiation from {sup 56}Mn and {sup 24}Na obtained by direct activation of the crushed apricot store which represents, in the scale model, the natural sediment on the bed of the Niger. The combined efforts of the laboratories of Chatou and of the Centre d'Etudes Nucleaires at Saclay are at the moment directed to the application of radioactive tracers to studies on the scale models with the double aim: a) of having a single investigational method for the actual experiment and for the model making it possible to control the accuracy of the model in the preliminary stage of calibrating this model; b) of making the most of the possibilities of observation and of direct measurement offered by the scale models for studying the possibility of improving the tracer method, in particular with respect to the collecting of quantitative data. (author) [French] La Laboratoire National d'Hydraulique qui, depuis quelques annees a developpe, en collaboration avec le Centre d'Etudes Nucleaires de Saclay, les appareillages et les techniques d'etudes des mouvements de sediments par la methode des traceurs radioactifs, s'efforce actuellement de mettre au point un moyen d'investigation veritablement quantitatif. Deux experiences ont ete effectuees recemment en

The origins, early development and status of Bourdieu's concept of 'cultural capital'.

Science.gov (United States)

Robbins, Derek

2005-03-01

The paper examines the context of the first introduction of the concept of 'cultural capital' in the sociology of education analyses undertaken in the early 1960s and published by Bourdieu in collaboration with Jean-Claude Passeron in 'Les etudiants et leurs etudes' (1964a) and Les Heritiers (1964b). It first considers the cultural contexts within which Bourdieu's thinking about culture originated--both in relation to his social origins and in relation to his intellectual training. It then examines the extent to which Bourdieu's early anthropological research in Algeria was influenced by his knowledge of American acculturation theory. It concludes that Bourdieu sought to use acculturation theory in a distinctive way--one which he articulated more confidently as he explored the relationship between agency and structural explanation in the late 1960s and early 1970s. The specific educational researches which stimulated the articulation of the concept of 'linguistic' or 'cultural' capital belonged to the period in which Bourdieu was only just beginning to refine his post-structuralist philosophy of social scientific explanation. To use these concepts now involves deploying them reflexively in accordance with Bourdieu's later thinking rather than at face value as they were first developed during the period in which he and Passeron were 'apprentice' researchers.

Mineralogical and geochemical investigation of the Oligocene sedimentary series of Saint-Agoulin; Etude mineralogique et geochimique de la serie sedimentaire oligocene de Saint-Agoulin

Energy Technology Data Exchange (ETDEWEB)

Mohadjer, K [Commissariat a l' Energie Atomique, 92 - Fontenay-aux-Roses (France). Centre d' Etudes Nucleaires, direction des productions; Faculte des Sciences de l' Universite de Paris, 75 (France)

1967-07-05

The mineralogical investigation is based on determination of the amounts of quartz, clays, feldspars and on grain size analysis. A distinction was established between two lithological groups: the lower group with dominant silica the upper with dominant carbonates. Clays of the two groups are comparable with dominant illite, and accessory kaolinite and montmorillonite. The amounts of the elements Si, Al, Fe, Ca, Mg, Na, K, Ti, Mn, P, Ba, Sr, Rb, Pb, Cu, Ni, Co, V, Be, B, Zr, U, were determined by several analytical methods: chemistry, X ray fluorescence, spectrography and fluorimetry. Correlations between the chemical elements and the mineralogical components were computed and plotted. Lastly the conditions of filling up of the basin are defined, taking into account the Oligocene climatic conditions. (author) [French] L'etude mineralogique est basee sur les dosages du quartz, de la calcite, des argiles, des feldspaths et sur les granulometries. On a distingue 2 familles lithologiques: l'une riche en quartz dans la partie inferieure, l'autre riche en carbonate dans la partie superieure. Les argiles des 2 familles sont comparables: illite predominante, kaolinite et montmorillonite accessoires. Les elements: Si, Al, Fe, Ca, Mg, Na, K, Ti, Mn, P, Ba, Sr, Rb, Pb, Cu, Ni, Co, V, Be, B, Zr, U, ont ete doses par differentes methodes d'analyse: analyse chimique, fluorescence X, spectrographie et fluorimetrie. Une etude de correlation entre les elements chimiques et les constituants mineralogiques a ete realisee. Enfin, les conditions de remplissage du Bassin sont definies, en tenant compte du contexte climatique oligocene. (auteur)

Some particular aspects of control in nuclear power reactors; Conception de la surete en france et influence des imperatifs de surete sur la conception des reacteurs

Energy Technology Data Exchange (ETDEWEB)

Vathaire, F de; Vernier, Ph; Pascouet, A [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

1964-07-01

This paper reviews the experience acquired in France on the question, of reactor safety. Since a special paper is being presented on reactors of the graphite gas type, the safety of the other types studied in France is discussed here: - heavy water-gas reactors, - fast neutron reactors, - water research reactors of the swimming-pool and tank types. The safety rules peculiar to the different types are explained, with emphasis on their influence on the reactor designs and on the power limits they impose. The corresponding safety studies are presented, particular stress being placed on the original work developed in these fields. Special mention is made of the experimental systems constructed for these studies: the reactor CABRI, pile loop for depressurization tests, loops outside the pile, mock-ups etc. (authors) [French] La presente communication propose une synthese de l'experience acquise en France en matiere de surete des reacteurs. Les reacteurs de la filiere graphite-gaz faisant l'objet d'une communication particuliere, on examine ici la surete des autres types de reacteurs etudies en France: - reacteurs eau lourde-gaz, - reacteurs a neutrons rapides, - reacteurs de recherche a eau des types piscines et tank. Les imperatifs de surete propres aux differentes filieres sont developpes, en mettant l'accent sur leur influence sur la conception des reacteurs et sur les limitations de puissance qu'ils entrainent. Les etudes de surete correspondantes sont presentees, en insistant plus particulierement sur les travaux originaux developpes dans ces domaines. On indique notamment les moyens d'essais qui ont ete construits pour ces etudes: le reacteur CABRI, boucle en pile pour essais de depressurisation, boucles hors pile, maquettes, etc. (auteurs)

Etudes sur le Portugal au Temps de l'Humanisme

Directory of Open Access Journals (Sweden)

J. Cruz Costa

1953-06-01

Full Text Available BATAILLON (Marcel. — Etudes sur le Portugal au Temps de l'Humanisme.  Acta Universitatis Conimbrigencis, 1952, 309 pp. (Primeiro Parágrafo do Artigo O Prof. Marcel Bataillon, erudito dos mais inteligentes da França atual, autor de uma obra que é hoje impr:scindível para quem pretenda estudar o humanismo renascentista na Espanha ou em Portugal, diríamos melhor, talvez: para quem pretenda estudar o Humanismo e a Renascença, — acaba de publicar, na coleção Acta Universitatis Conimbrigencis, êste volume no qual reune alguns trabalhos da mais alta importância para o conhecimento de muitos aspectos da vida espiritual portuguêsa do século XVI.

The development of a very high stability electrostatic generator (1962); Etude et realisation d'un generateur electrostatique a tres haute stabilite (1962)

Energy Technology Data Exchange (ETDEWEB)

Jonckheere, R E.L. [Commissariat a l' Energie Atomique, Grenoble (France). Centre d' Etudes Nucleaires

1962-07-01

This thesis deals with the study of an electrostatic high voltage generator having a voltage stability of the order of 10{sup -6} per minute. This equipment should be very useful in electron microscopy. The electrostatic generator is studied as a control system element: transfer function, parasitic signals and noise are determined and a mathematical model is proposed. A theoretical study of the open loop transfer function, stability, transient response, voltage stabilization of five different control systems shows which one should be able to fulfill the requirements There follows a detailed study of drift, a description of the actual system and performance data. (author) [French] Cette etude concerne un generateur electrostatique capable de fournir une tres haute tension continue dont la stabilite relative est de l'ordre de 10{sup -6} pendant une minute. Une telle performance rend cet appareillage tres utile en microscopie electronique. La generatrice electrostatique est etudiee en tant qu'element d'un systeme asservi: on determine successivement la fonction de transfert, les perturbations, le bruit de fond et le modele mathematique. L'etude de cinq differents circuits de regulation en ce qui concerne leur fonction de transfert, stabilite, reponse en regime transitoire, attenuation des perturbations, permettra de choisir le systeme qui semble le mieux repondre aux exigences. Viennent ensuite une etude detaillee de la derive, la description de la realisation pratique et les resultats de mesure. (auteur)

Nuclear heat source component design considerations for HTGR process heat reactor plant concept

International Nuclear Information System (INIS)

McDonald, C.F.; Kapich, D.; King, J.H.; Venkatesh, M.C.

1982-05-01

The coupling of a high-temperature gas-cooled reactor (HTGR) and a chemical process facility has the potential for long-term synthetic fuel production (i.e., oil, gasoline, aviation fuel, hydrogen, etc) using coal as the carbon source. Studies are in progress to exploit the high-temperature capability of an advanced HTGR variant for nuclear process heat. The process heat plant discussed in this paper has a 1170-MW(t) reactor as the heat source and the concept is based on indirect reforming, i.e., the high-temperature nuclear thermal energy is transported [via an intermediate heat exchanger (IHX)] to the externally located process plant by a secondary helium transport loop. Emphasis is placed on design considerations for the major nuclear heat source (NHS) components, and discussions are presented for the reactor core, prestressed concrete reactor vessel (PCRV), rotating machinery, and heat exchangers

A new concept of smart flexible phased array transducer to inspect component of complex geometry

International Nuclear Information System (INIS)

Roy, O.; Mauhaut, S.; Casula, O.; Cattiaux, G.

2001-01-01

In most of industries as aeronautics, aerospace and nuclear, the main part of the non destructive testing is carried out directly in touch with the inspected component. Among others, the cooling piping of French pressurized water reactor comprises many welding components with complex geometry: elbows, butt welds, nozzles. In service inspections of such components performed with conventional ultrasonic contact transducers present limited performances. First, variations in sensitivity, due to unmatched contact on depressions or irregular surface are observed, resulting in poor detection performances. In addition, the beam orientation transmitted through complex interfaces cannot be totally controlled, because of the disorientations suffered by the transducer during its displacement. As a result, the possible defect cannot be correctly detected, positioned and characterized. To overcome these difficulties and to improve the performances of such inspections, the French Atomic Energy Commission has developed a new concept of transducer, allowing both to take into account the varying profile of the tested component and to efficiently compensate these effects. This transducer is a flexible phased array able to match the surface of the inspected specimen and to efficiently compensate the deformation of its own surface, in order to preserve the ultrasonic beam characteristics in spite of the profile variations encountered during the scanning. This ability is achieved thanks to a specific instrumentation, which measures the deformation of the transducer radiating surface, made of individual ultrasonic elements mechanically jointed to fit the actual surface of the component being inspected. Inspections in pulse-echo mode have been performed on a specimen with an irregular profile containing artificial embedded reflectors. The comparison with inspection carried out using conventional transducer shows the efficiency of the system to characterize defects under such complex

An intuitive concept for manufacturing and inspecting of aspherical components

Science.gov (United States)

Chou, Hsiao-Yu; Chang, Keng-Shou

2011-09-01

In this paper we propose an intuitive concept for manufacturing and inspecting of aspherical components. Two types, parabolic and cylinder, of plano-convex and plano-concave aspherical lenses were made by LOH 120S form generation machine. Three form error measurement methods were used known as coordinate measuring machine (CMM), interferometer with CGH null lens and inspection with combined pair lenses. Ultra high accuracy CMM from Panasonic Co., CGH cylinder null and CGH aspheric null from Diffraction International and OWI 150 ASPH CGH interferometer from OptoTech GmbH play the roll for measurement. CMM was used as a surface profiler to inspect the surface shape, and the software GRAPHER was also used as analysis tool to exam asphere numerical datum. The difference between theoretical and practical is as a surface polishing revised reference. The finished plano-convex and plano-concave aspherical lenses can be combined to be a plane lens. The individual and combined lenses were inspected on OPTOTECH OWI 150 ASPH CGH interferometer. The compared interference patterns have shown with the Diffration International CGH Aspheric Null "ASPHERIC 1" and CGH Cylinder Null "H80F2C". Through the procedure, the combined plano-convex and plano-concave aspherical lenses should be a perfect match plane lens and the individual lens might be an aspherical test standard element for quick inspection.

Developmental Dynamics of General and School-Subject-Specific Components of Academic Self-Concept, Academic Interest, and Academic Anxiety.

Science.gov (United States)

Gogol, Katarzyna; Brunner, Martin; Preckel, Franzis; Goetz, Thomas; Martin, Romain

2016-01-01

The present study investigated the developmental dynamics of general and subject-specific (i.e., mathematics, French, and German) components of students' academic self-concept, anxiety, and interest. To this end, the authors integrated three lines of research: (a) hierarchical and multidimensional approaches to the conceptualization of each construct, (b) longitudinal analyses of bottom-up and top-down developmental processes across hierarchical levels, and (c) developmental processes across subjects. The data stemmed from two longitudinal large-scale samples (N = 3498 and N = 3863) of students attending Grades 7 and 9 in Luxembourgish schools. Nested-factor models were applied to represent each construct at each grade level. The analyses demonstrated that several characteristics were shared across constructs. All constructs were multidimensional in nature with respect to the different subjects, showed a hierarchical organization with a general component at the apex of the hierarchy, and had a strong separation between the subject-specific components at both grade levels. Further, all constructs showed moderate differential stabilities at both the general (0.42 < r < 0.55) and subject-specific levels (0.45 < r < 0.73). Further, little evidence was found for top-down or bottom-up developmental processes. Rather, general and subject-specific components in Grade 9 proved to be primarily a function of the corresponding components in Grade 7. Finally, change in several subject-specific components could be explained by negative effects across subjects.

Etude d'un concept de coeur hybride refroidi a l'eau supercritique

Science.gov (United States)

Delattre, Baptiste

Facing the current weather and energy global problem, Canada chose to develop a reactor cooled by water at supercritical conditions (SCWR). Inspired by the current CANDU-6 pressure tube technology, this concept should allow to save a substantial amount of efforts for developping a brand new kind of reactor by using the well-known pressure tube CANDU design. In fact, this type of reactor should be able to reach a better energy efficiency as well as other essential criteria about safety, security, non-proliferation... Nevertheless, there are still a lot of technology challenges to be dealt with to satisfy the differents obligations related to the use of supercritical water (SCW). Thus, materials to use remain undetermined because of a 25 MPa operating pressure and a 650.C temperature for the SCW coolant. Actually, materials in presence of SCW should be able to avoid too much corrosion and remain low neutrons absorbers. Additionnaly, the use of a light water coolant makes the neutronic absorption more important than in CANDU heavy-water cooled reactors. Additionally, a positive coolant void reactivity (CVR) and safety related problem remains among the challenges to overcome for developping a SCWR. Bringing about a solutions to all these problems remains very difficult and that's why some concessions on these criteria have to be made in order to achieve a viable reactor. This study presents some thougts and works in that direction. Originally developped in early studies about thermodynamic cycle optimization for a SCW power plant, a new hybrid reactor concept with two channels types has arise. To this purpose, we imagine a pressure tube core design but with two different types of channels: . Some channels have thermodynamic conditions where water goes through a supercritical state. . The other channels have "CANDU like" thermodynamic conditions allowing the flow of pressurized light water under sub-critical conditions. These two kinds of features should mitigate the

Randomized control trial for the assessment of the anti-albuminuric effects of topiroxostat in hyperuricemic patients with diabetic nephropathy (the ETUDE study).

Science.gov (United States)

Kato, Sawako; Ando, Masahiko; Mizukoshi, Toshihiro; Nagata, Takanobu; Katsuno, Takayuki; Kosugi, Tomoki; Tsuboi, Naotake; Maruyama, Shoichi

2016-05-01

Proteinuria is an established risk factor for diabetic nephropathy. Recent studies indicate that some xanthine oxidase inhibitors have a renoprotective effect. The aim of this study was to assess whether topiroxostat reduces albuminuria in hyperuricemic patients with diabetic nephropathy and overt proteinuria. The ETUDE study is an ongoing 24-week, multicenter, open-label, randomized (1:1), parallel group study involving hyperuricemic patients with diabetic nephropathy (estimated glomerular filtration rate [eGFR] ≥ 20 mL/min/1.73 m(2)) and overt proteinuria (0.3 ≤ urine protein to creatinine ratio (UPCR) ETUDE trial is the first randomized controlled study of topiroxostat in hyperuricemic patients with diabetic nephropathy and overt proteinuria. We will clarify the pleiotropic function of topiroxostat including an anti-albumiuric effect as well as its effects on safely decreasing serum uric acid levels.

Marketing information system - concept and components

OpenAIRE

Domazet Ivana S.

2003-01-01

Current conditions for the carrying out of business activities are being characterized by an intensive changing of the business surrounding, as well as by a need for a flexible adapting to the newly-created conditions. Dynamisation of economic ambience, based on the principles of a propulsive marketing economy is affirming a business philosophy which will be based on requests of the strategic marketing. Vital component of every successful company is information system, which helps data acquis...

Preliminary studies leading to a conceptual design of a 1000 MWe fast neutron reactor; Etudes preliminaires conduisant a un concept de reacteur a neutrons rapides de 1000 MWe

Energy Technology Data Exchange (ETDEWEB)

Vendryes, G.; Zaleski, C.P. [Association Euratom-CEA Cadarache (France). Centre d' Etudes Nucleaires

1964-07-01

This report presents the results of studies which seemed important to undertake in connexion with the development of fast neutron reactors. - It points out the advantage of high internal breeding ratios ({approx}1, 1) which are necessary in order to get a small change in time both in power distribution and reactivity (less: than 0.005 {delta}k/k in 18 months). - It shows how to achieve this goal, when simultaneously power distribution flattening is obtained. These results in a higher mean specific power (which is an economic gain) and therefore in a smaller doubling time (about 10 years). - It attempts to find criteria concerning the specific power that should be used in future reactor designs -It presents a conceptional design of a 1000 MWe fast neutron reactor, for the realisation of which no technological impossibility appears. - It shows that the dynamic behaviour seems satisfactory despite a positive total isothermal sodium coefficient. - It tries to predict the development of fast reactors within the future total nuclear program. It does not appear that fissile materials supply problems should in France slow down the development of fast neutron reactors, which will be essentially tied up to its economical ability to produce cheap electric power. (authors) [French] Ce rapport presente les etudes qu'il nous a paru important d'aborder dans le cadre du developpement des reacteurs a neutrons rapides. - Il met en evidence l'interet des taux de regeneration internes eleves ({approx}1, 1) pour obtenir une bonne evolution dans le temps de la distribution de puissance et de la reactivite (moins de 0,005 {delta}k/k pour 18 mois). - Il montre la possibilite d'y parvenir tout en applatissant la distribution des fissions, ce qui se traduit par une puissance specifique moyenne plus elevee (gain economique), et donc un temps de doublement plus faible de l'ordte de 10 ans - Il tente de definir un optimum de la puissance specifique valable pour les

Preliminary studies leading to a conceptual design of a 1000 MWe fast neutron reactor; Etudes preliminaires conduisant a un concept de reacteur a neutrons rapides de 1000 MWe

Energy Technology Data Exchange (ETDEWEB)

Vendryes, G; Zaleski, C P [Association Euratom-CEA Cadarache (France). Centre d' Etudes Nucleaires

1964-07-01

This report presents the results of studies which seemed important to undertake in connexion with the development of fast neutron reactors. - It points out the advantage of high internal breeding ratios ({approx}1, 1) which are necessary in order to get a small change in time both in power distribution and reactivity (less: than 0.005 {delta}k/k in 18 months). - It shows how to achieve this goal, when simultaneously power distribution flattening is obtained. These results in a higher mean specific power (which is an economic gain) and therefore in a smaller doubling time (about 10 years). - It attempts to find criteria concerning the specific power that should be used in future reactor designs -It presents a conceptional design of a 1000 MWe fast neutron reactor, for the realisation of which no technological impossibility appears. - It shows that the dynamic behaviour seems satisfactory despite a positive total isothermal sodium coefficient. - It tries to predict the development of fast reactors within the future total nuclear program. It does not appear that fissile materials supply problems should in France slow down the development of fast neutron reactors, which will be essentially tied up to its economical ability to produce cheap electric power. (authors) [French] Ce rapport presente les etudes qu'il nous a paru important d'aborder dans le cadre du developpement des reacteurs a neutrons rapides. - Il met en evidence l'interet des taux de regeneration internes eleves ({approx}1, 1) pour obtenir une bonne evolution dans le temps de la distribution de puissance et de la reactivite (moins de 0,005 {delta}k/k pour 18 mois). - Il montre la possibilite d'y parvenir tout en applatissant la distribution des fissions, ce qui se traduit par une puissance specifique moyenne plus elevee (gain economique), et donc un temps de doublement plus faible de l'ordte de 10 ans - Il tente de definir un optimum de la puissance specifique valable pour les projets de reacteurs futurs

Developmental Dynamics of General and School-Subject-Specific Components of Academic Self-Concept, Academic Interest, and Academic Anxiety

Directory of Open Access Journals (Sweden)

Katarzyna eGogol

2016-03-01

Full Text Available The present study investigated the developmental dynamics of general and subject-specific (i.e., mathematics, French, and German components of students’ academic self-concept, anxiety, and interest. To this end, the authors integrated three lines of research: (a hierarchical and multidimensional approaches to the conceptualization of each construct, (b longitudinal analyses of bottom-up and top-down developmental processes across hierarchical levels, and (c ipsative developmental processes across subjects. The data stemmed from two longitudinal large-scale samples (N = 3,498 and N = 3,863 of students attending Grades 7 and 9 in Luxembourgish schools. Nested-factor models were applied to represent each construct at each grade level. The analyses demonstrated that several characteristics were shared across constructs. All constructs were multidimensional in nature with respect to the different subjects, showed a hierarchical organization with a general component at the apex of the hierarchy, and had a strong separation between the subject-specific components at both grade levels. Further, all constructs showed moderate differential stabilities at both the general (.42 < r < .55 and subject-specific levels (.45 < r < .73. Further, little evidence was found for top-down or bottom-up developmental processes. Rather, general and subject-specific components in Grade 9 proved to be primarily a function of the corresponding components in Grade 7. Finally, change in several subject-specific components could be explained by negative, ipsative effects across subjects.

Developmental Dynamics of General and School-Subject-Specific Components of Academic Self-Concept, Academic Interest, and Academic Anxiety

Science.gov (United States)

Gogol, Katarzyna; Brunner, Martin; Preckel, Franzis; Goetz, Thomas; Martin, Romain

2016-01-01

The present study investigated the developmental dynamics of general and subject-specific (i.e., mathematics, French, and German) components of students' academic self-concept, anxiety, and interest. To this end, the authors integrated three lines of research: (a) hierarchical and multidimensional approaches to the conceptualization of each construct, (b) longitudinal analyses of bottom-up and top-down developmental processes across hierarchical levels, and (c) developmental processes across subjects. The data stemmed from two longitudinal large-scale samples (N = 3498 and N = 3863) of students attending Grades 7 and 9 in Luxembourgish schools. Nested-factor models were applied to represent each construct at each grade level. The analyses demonstrated that several characteristics were shared across constructs. All constructs were multidimensional in nature with respect to the different subjects, showed a hierarchical organization with a general component at the apex of the hierarchy, and had a strong separation between the subject-specific components at both grade levels. Further, all constructs showed moderate differential stabilities at both the general (0.42 < r < 0.55) and subject-specific levels (0.45 < r < 0.73). Further, little evidence was found for top-down or bottom-up developmental processes. Rather, general and subject-specific components in Grade 9 proved to be primarily a function of the corresponding components in Grade 7. Finally, change in several subject-specific components could be explained by negative effects across subjects. PMID:27014162

Methods for studying the radioactive contamination of plants (1963); Methodes d'etude de la contamination radioactive des vegetaux (1963)

Energy Technology Data Exchange (ETDEWEB)

Coulon, R; Jeanmaire, L; Michon, G [Commissariat a l' Energie Atomique, Fontenay-aux-Roses (France). Centre d' Etudes Nucleaires

1963-07-01

The authors first define the doctrine which led to the devising of a method for studying the radioactive pollution of plants, based on the use of simple techniques, having the possibility of being adapted for routine work, and so devised that each stage is proceeded with only if the preceding one justifies it. For each stage a study is effected comparing the results obtained by the use of more exact techniques. The second part describes in detail the techniques used. (authors) [French] Dans une premiere partie lea auteurs definissent la doctrine qui leur a permis d'elaborer une methode d'etude de la pollution radioactive des vegetaux, basee sur l'utilisation de techniques simples, se pretant au travail de serie et concues de telle maniere que chaque etape n'est abordee que si la precedente le justifie. Chaque etape fait l'objet d'une etude qui compare les resultats a ceux obtenue par des techniques plus precises. La deuxieme partie decrit dans le detail les techniques utilisees. (auteurs)

The development of a very high stability electrostatic generator (1962); Etude et realisation d'un generateur electrostatique a tres haute stabilite (1962)

Energy Technology Data Exchange (ETDEWEB)

Jonckheere, R.E.L. [Commissariat a l' Energie Atomique, Grenoble (France). Centre d' Etudes Nucleaires

1962-07-01

This thesis deals with the study of an electrostatic high voltage generator having a voltage stability of the order of 10{sup -6} per minute. This equipment should be very useful in electron microscopy. The electrostatic generator is studied as a control system element: transfer function, parasitic signals and noise are determined and a mathematical model is proposed. A theoretical study of the open loop transfer function, stability, transient response, voltage stabilization of five different control systems shows which one should be able to fulfill the requirements There follows a detailed study of drift, a description of the actual system and performance data. (author) [French] Cette etude concerne un generateur electrostatique capable de fournir une tres haute tension continue dont la stabilite relative est de l'ordre de 10{sup -6} pendant une minute. Une telle performance rend cet appareillage tres utile en microscopie electronique. La generatrice electrostatique est etudiee en tant qu'element d'un systeme asservi: on determine successivement la fonction de transfert, les perturbations, le bruit de fond et le modele mathematique. L'etude de cinq differents circuits de regulation en ce qui concerne leur fonction de transfert, stabilite, reponse en regime transitoire, attenuation des perturbations, permettra de choisir le systeme qui semble le mieux repondre aux exigences. Viennent ensuite une etude detaillee de la derive, la description de la realisation pratique et les resultats de mesure. (auteur)

Contribution to the study of the stability of water-cooled reactors; Contribution a l'etude de la stabilite des reacteurs refroidis par de l'eau

Energy Technology Data Exchange (ETDEWEB)

Coudert, C [Commissariat a l' Energie Atomique, Cadarache (France). Centre d' Etudes Nucleaires

1969-06-01

This work is devoted to the study of the stability of reactors cooled by water subjected only to natural convection. It is made up of two parts, a theoretical study and experimental work, each of these parts being devoted to a consideration of linear and non-linear conditions: - calculation of the transfer function of the reactor using neutronic and hydrodynamic linear equations with the determination of the instability threshold; - demonstration of the existence of the limiting oscillation cycle in the case of a linear feedback using MALKIN'S method; - measurement and interpretation of the reactor's transfer functions and of the hydrodynamic transfer functions; and - analysis of the noise due to boiling. (author) [French] Dans ce travail on etudie la stabilite des piles refroidies par de l'eau circulant en convection naturelle. Cette etude se divise en deux parties: un travail theorique et un travail experimental, chacune de ces parties comportant une etude lineaire et une etude non-lineaire: - calcul de la fonction de transfert du reacteur a partir des equations lineaires de la neutronique et de l'hydrodynamique avec determination du seuil d'instabilite; - demonstration de l'existence du cycle limite des oscillations dans le cas d'une retroaction lineaire en utilisant la methode de MALKIN; - mesure et interpretation de la fonction de transfert du reacteur et des fonctions de transfert hydrodynamiques; et - analyse du bruit d'ebullition. (auteur)

Aerodynamic and thermal studies of cans of gas cooled fuel elements; Etudes aerodynamiques et thermiques de gaines d'elements combustibles refroidis par gaz

Energy Technology Data Exchange (ETDEWEB)

Gelin, P [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires; Milliat, J P [Electricite de France (EDF), 75 - Paris (France)

1964-07-01

Research on clusters was undertaken at the CEA in 1959, while studies on herring-bone cans were developed at the EDF Laboratory at Chatou and the CEA laboratory at Saclay at the end of 1959. In 1962, a general study on corrugations was begun at the Saclay Laboratory with a view to improving the clusters, and continued later in both laboratories relative to the internal cooling of annular fuel elements. As these studies progressed, trial facilities were extended while experimental methods have improved constantly. At the present time, both laboratories, working in complete collaboration, have powerful means at their disposal. Work on the clusters has been concerned chiefly with pressure losses due to the assembly parts, and with the temperature variations around the elements of the cluster. In this way, we have been able to determine satisfactorily the hot points of the can, the deformations of the rods and the conditions of stability of these deformations. In the case of the herring-bone cans, studies have been directed to the evolution of performances as a function of the geometric parameters on the one hand, and to the special aerodynamic and thermal features caused by the fins and by interruptions of cartridge on the other hand. These studies have led to a very thorough knowledge of the cartridges chosen for the reactors EDF 2 and EDF 3, and now open up very hopeful prospects for future reactors, particularly those fitted with annular elements; among the alternatives suitable for the inner surface of the annular element can, corrugations and longitudinal fins have been fairly extensively tested over a wide range of Reynolds number. (authors) [French] Les etudes de grappes ont ete entreprises au C.E.A. en 1959, tandis que les etudes de gaines a chevrons se sont developpees au Laboratoire de Chatou de l'EDF et au Laboratoire de Saclay du C.E.A. a la fin de l'annee 1959. En 1962, une etude generale sur les corrugations a ete commencee au Laboratoire de Saclay pour

ITER plasma facing components

International Nuclear Information System (INIS)

Kuroda, T.; Vieider, G.; Akiba, M.

1991-01-01

This document summarizes results of the Conceptual Design Activities (1988-1990) for the International Thermonuclear Experimental Reactor (ITER) project, namely those that pertain to the plasma facing components of the reactor vessel, of which the main components are the first wall and the divertor plates. After an introduction and an executive summary, the principal functions of the plasma-facing components are delineated, i.e., (i) define the low-impurity region within which the plasma is produced, (ii) absorb the electromagnetic radiation and charged-particle flux from the plasma, and (iii) protect the blanket/shield components from the plasma. A list of critical design issues for the divertor plates and the first wall is given, followed by discussions of the divertor plate design (including the issues of material selection, erosion lifetime, design concepts, thermal and mechanical analysis, operating limits and overall lifetime, tritium inventory, baking and conditioning, safety analysis, manufacture and testing, and advanced divertor concepts) and the first wall design (armor material and design, erosion lifetime, overall design concepts, thermal and mechanical analysis, lifetime and operating limits, tritium inventory, baking and conditioning, safety analysis, manufacture and testing, an alternative first wall design, and the limiters used instead of the divertor plates during start-up). Refs, figs and tabs

A study of the aptitude of soils under natural conditions to retain radiostrontium; Etude de la vocation des sols en place a la retention du radiostrontium

Energy Technology Data Exchange (ETDEWEB)

Bovard, P; Grauby, A [Commissariat a l' Energie Atomique, Saclay (France).Centre d' Etudes Nucleaires

1960-07-01

Independently of the theoretical study of the propagation of radioactivity in the soil as a result of submersions or of radioactive rain, the authors have studied directly and practically how this radioactivity can vary in the actual soil. To this end a simple, rapid method has been perfected; it makes it possible to maintain for each soil sample the natural parameters (structure, humidity, etc.) without introducing boundary effects. In the laboratory, after charging the soil samples, part of the study of the propagation of radioactivity is done by autoradiography; finally, as a practical application, the study of an atomic site illustrates the methods described. (author) [French] Independamment de l'etude theorique de la propagation de la radioactivite dans le sol a la suite de submersions ou de pluies radioactives, les auteurs ont etudie directement et pratiquement comment pourrait evoluer cette radioactivite dans les sols en place. Pour cela, une methode simple et rapide a ete mise au point; elle permet de conserver pour chaque echantillon de sol, les parametres naturels (structure, humidite, etc...), sans introduire d'effets de paroi. En laboratoire, apres mise en charge des massifs preleves, une partie de l'etude de la propagation des radioelements est realisee par autoradiographie; enfin, une application pratique, l'etude d'un site atomique, illustre l'expose. (auteur)

A study of the aptitude of soils under natural conditions to retain radiostrontium; Etude de la vocation des sols en place a la retention du radiostrontium

Energy Technology Data Exchange (ETDEWEB)

Bovard, P.; Grauby, A. [Commissariat a l' Energie Atomique, Saclay (France).Centre d' Etudes Nucleaires

1960-07-01

Independently of the theoretical study of the propagation of radioactivity in the soil as a result of submersions or of radioactive rain, the authors have studied directly and practically how this radioactivity can vary in the actual soil. To this end a simple, rapid method has been perfected; it makes it possible to maintain for each soil sample the natural parameters (structure, humidity, etc.) without introducing boundary effects. In the laboratory, after charging the soil samples, part of the study of the propagation of radioactivity is done by autoradiography; finally, as a practical application, the study of an atomic site illustrates the methods described. (author) [French] Independamment de l'etude theorique de la propagation de la radioactivite dans le sol a la suite de submersions ou de pluies radioactives, les auteurs ont etudie directement et pratiquement comment pourrait evoluer cette radioactivite dans les sols en place. Pour cela, une methode simple et rapide a ete mise au point; elle permet de conserver pour chaque echantillon de sol, les parametres naturels (structure, humidite, etc...), sans introduire d'effets de paroi. En laboratoire, apres mise en charge des massifs preleves, une partie de l'etude de la propagation des radioelements est realisee par autoradiographie; enfin, une application pratique, l'etude d'un site atomique, illustre l'expose. (auteur)

Nuclear component design ontology building based on ASME codes

International Nuclear Information System (INIS)

Bao Shiyi; Zhou Yu; He Shuyan

2005-01-01

The adoption of ontology analysis in the study of concept knowledge acquisition and representation for the nuclear component design process based on computer-supported cooperative work (CSCW) makes it possible to share and reuse numerous concept knowledge of multi-disciplinary domains. A practical ontology building method is accordingly proposed based on Protege knowledge model in combination with both top-down and bottom-up approaches together with Formal Concept Analysis (FCA). FCA exhibits its advantages in the way it helps establish and improve taxonomic hierarchy of concepts and resolve concept conflict occurred in modeling multi-disciplinary domains. With Protege-3.0 as the ontology building tool, a nuclear component design ontology based ASME codes is developed by utilizing the ontology building method. The ontology serves as the basis to realize concept knowledge sharing and reusing of nuclear component design. (authors)

An ontology-based exploration of the concepts and relationships in the activities and participation component of the international classification of functioning, disability and health.

Science.gov (United States)

Della Mea, Vincenzo; Simoncello, Andrea

2012-02-28

The International Classification of Functioning, Disability and Health (ICF) is a classification of health and health-related issues, aimed at describing and measuring health and disability at both individual and population levels. Here we discuss a preliminary qualitative and quantitative analysis of the relationships used in the Activities and Participation component of ICF, and a preliminary mapping to SUMO (Suggested Upper Merged Ontology) concepts. The aim of the analysis is to identify potential logical problems within this component of ICF, and to understand whether activities and participation might be defined more formally than in the current version of ICF. In the relationship analysis, we used four predicates among those available in SUMO for processes (Patient, Instrument, Agent, and subProcess). While at the top level subsumption was used in most cases (90%), at the lower levels the percentage of other relationships rose to 41%. Chapters were heterogeneous in the relationships used and some of the leaves of the tree seemed to represent properties or parts of the parent concept rather than subclasses. Mapping of ICF to SUMO proved partially feasible, with the activity concepts being mapped mostly (but not totally) under the IntentionalProcess concept in SUMO. On the other hand, the participation concept has not been mapped to any upper level concept. Our analysis of the relationships within ICF revealed issues related to confusion between classes and their properties, incorrect classifications, and overemphasis on subsumption, confirming what already observed by other researchers. However, it also suggested some properties for Activities that could be included in a more formal model: number of agents involved, the instrument used to carry out the activity, the object of the activity, complexity of the task, and an enumeration of relevant subtasks.

An ontology-based exploration of the concepts and relationships in the activities and participation component of the international classification of functioning, disability and health

Directory of Open Access Journals (Sweden)

Della Mea Vincenzo

2012-02-01

Full Text Available Abstract Background The International Classification of Functioning, Disability and Health (ICF is a classification of health and health-related issues, aimed at describing and measuring health and disability at both individual and population levels. Here we discuss a preliminary qualitative and quantitative analysis of the relationships used in the Activities and Participation component of ICF, and a preliminary mapping to SUMO (Suggested Upper Merged Ontology concepts. The aim of the analysis is to identify potential logical problems within this component of ICF, and to understand whether activities and participation might be defined more formally than in the current version of ICF. Results In the relationship analysis, we used four predicates among those available in SUMO for processes (Patient, Instrument, Agent, and subProcess. While at the top level subsumption was used in most cases (90%, at the lower levels the percentage of other relationships rose to 41%. Chapters were heterogeneous in the relationships used and some of the leaves of the tree seemed to represent properties or parts of the parent concept rather than subclasses. Mapping of ICF to SUMO proved partially feasible, with the activity concepts being mapped mostly (but not totally under the IntentionalProcess concept in SUMO. On the other hand, the participation concept has not been mapped to any upper level concept. Conclusions Our analysis of the relationships within ICF revealed issues related to confusion between classes and their properties, incorrect classifications, and overemphasis on subsumption, confirming what already observed by other researchers. However, it also suggested some properties for Activities that could be included in a more formal model: number of agents involved, the instrument used to carry out the activity, the object of the activity, complexity of the task, and an enumeration of relevant subtasks.

Study of the dynamic behaviour of the reactor Rapsodie; Etude du comportement dynamique de la pile rapsodie

Energy Technology Data Exchange (ETDEWEB)

Abdon, R; Chaigne, M [Commissariat a l' Energie Atomique, Cadarache (France). Centre d' Etudes Nucleaires

1964-07-01

. The investigation of the control, carried out on analog computer, served to determine the different possible means of starting and changing the conditions of the reactor as well as its automatic control. The calculations were examined in the totality by the construction of a training simulator composed of a board similar to the control board of the reactor, all of whose commands (reactivity and flows) work on an analogue computer which resolves in the real time the dynamic equations of the reactor and which reproduces simultaneously all the parameters representing the state of the installation (power, period, temperatures, etc. ) in the case of various incidents as well as under normal conditions of functioning. (authors) [French] On sait que le developpement des reacteurs surgenerateurs a neutrons rapides pose des problemes nouveaux d'une part dans les domaines mecanique et thermique et d'autre part en ce qui concerne leur comportement dynamique et leur surete. La pile RAPSODIE a ete l'objet de tres nombreuses etudes dynamiques effectuees sur machines analogiques et digitales, pour deux versions du combustible (metal et oxyde). Apres elaboration des modeles mathematiques representatifs de l'ensemble de l'installation (bloc pile et circuit de refroidissement) tant du point de vue neutronique que du point de vue thermodynamique, on a mis au point les schemas analogiques et les codes digitaux utilisables pour mener a bien les simulations d'incidents, de conduite et de stabilite du reacteur. On s'est attache, par rapport aux methodes habituelles a obtenir une precision plus grande, par un decoupage en zones plus fines, par l'emploi de formulations plus representatives du systeme reel, voire solubles analytiquement. Les etudes d'incidents ont ete effectuees par voie analogique pour l'ensemble de l'installation et par voie digitale pour l'etude du bloc pile seul ou de l'installation fonctionnant avec un seul circuit thermique. Un programme complementaire special - qui, a

Definition of 1992 Technology Aircraft Noise Levels and the Methodology for Assessing Airplane Noise Impact of Component Noise Reduction Concepts

Science.gov (United States)

Kumasaka, Henry A.; Martinez, Michael M.; Weir, Donald S.

1996-01-01

This report describes the methodology for assessing the impact of component noise reduction on total airplane system noise. The methodology is intended to be applied to the results of individual study elements of the NASA-Advanced Subsonic Technology (AST) Noise Reduction Program, which will address the development of noise reduction concepts for specific components. Program progress will be assessed in terms of noise reduction achieved, relative to baseline levels representative of 1992 technology airplane/engine design and performance. In this report, the 1992 technology reference levels are defined for assessment models based on four airplane sizes - an average business jet and three commercial transports: a small twin, a medium sized twin, and a large quad. Study results indicate that component changes defined as program final goals for nacelle treatment and engine/airframe source noise reduction would achieve from 6-7 EPNdB reduction of total airplane noise at FAR 36 Stage 3 noise certification conditions for all of the airplane noise assessment models.

Study, design and realization of a fault-tolerant and predictable synchronous communication protocol on off-the-shelf components; Etude, conception et mise en oeuvre d'un protocole de communication synchrone tolerant aux fautes et predictible sur des composants reseaux standards

Energy Technology Data Exchange (ETDEWEB)

Chabrol, D

2006-06-15

This PhD thesis contributes to the design and realization of safety-critical real-time systems on multiprocessor architectures with distributed memory. They are essential to compute systems that have to ensure complex and critical functions. This PhD thesis deals with communication media management. The communication management conditions strongly the capability of the system to fulfill the timeliness property and the dependability requirements. Our contribution includes: - The design of predictable and fault-tolerant synchronous communication protocol; - The study and the definition of the execution model to have a efficient and safe communications management; - The proposal of a method to generate automatically the communications scheduling. Our approach is based on a communication model that allows the analysis of the feasibility, before execution, of a distributed safe-critical real-time system with timeliness and safety requirements. This leads to the definition of an execution model based on a time-triggered and parallel communication management. A set of linear constraints system is generated automatically to compute the network scheduling and the network load with timeliness fulfillment. Then, the proposed communication interface is based on an advanced version of TDMA protocol which allows to use proprietary components (TTP, FlexRay) as well as standard components (Ethernet). The concepts presented in this thesis lead to the realisation and evaluation of a prototype within the framework of the OASIS project done at the CEA/List. (author)

Comparison of seismic isolation concepts for FBR

International Nuclear Information System (INIS)

Shiojiri, H.; Mazda, T.; Kasai, H.; Kanda, J.N.; Kubo, T.; Madokoro, M.; Shimomura, T.; Nojima, O.

1989-01-01

This paper seeks to verify the reliability and effectiveness of seismic isolation for FBR. Some results of the preliminary study of the program are described. Seismic isolation concepts and corresponding seismic isolation devices were selected. Three kinds of seismically-isolated FBR plant concepts were developed by applying promising seismic isolation concepts to the non-isolated FBR plant, and by developing plant component layout plans and building structural designs. Each plant was subjected to seismic response analysis and reduction in the amount of material of components and buildings were estimated for each seismic isolation concepts. Research and development items were evaluated

Traitements didactiques preventifs d'un type de conceptions erronees en sciences physiques chez des eleves du secondaire

Science.gov (United States)

Blondin, Andre

Dans un contexte constructiviste, les connaissances anterieures d'un individu sont essentielles a la construction de nouvelles connaissances. Quelle qu'en soit la source (certaines de ces connaissances ont ete elaborees en classe, d'autres ont ete elaborees par interaction personnelle de l'individu avec son environnement physique et social), ces connaissances, une fois acquises, constituent les matieres premieres de l'elaboration des nouvelles conceptions de cet individu. Generalement, cette influence est consideree comme positive. Cependant, dans un milieu scolaire ou l'apprentissage de certaines conceptions enchassees dans un programme d'etudes et enterinees par l'ensemble d'une communaute est obligatoire, certaines connaissances anterieures peuvent entraver la construction des conceptions exigees par la communaute. La litterature abonde de tels exemples. Cependant, certaines connaissances anterieures, en soi tout a fait conformes a l'Heritage, peuvent aussi, parce qu'utilisees de facon non pertinente, entraver la construction d'une conception exigee par la communaute. Ici, la litterature nous donne peu d'exemples de ce type, mais nous en fournirons quelques-uns dans le cadre theorique, et ce sera un d'entre eux qui servira de base a nos propos. En effet, une grande proportion d'eleves inscrits a un cours de sciences physiques de la quatrieme secondaire, en reponse a un probleme deja solutionne durant l'annee et redonne lors d'un examen sommatif, "Pourquoi la Lune nous montre-t-elle toujours la meme face?", attribue principalement la cause de ce phenomene a la rotation de la Terre sur son axe. En tant que responsable de l'enseignement de ce programme d'etudes, plusieurs questions nous sont venues a l'esprit, entre autres, comment, dans un contexte constructiviste, est-il possible de reduire chez un eleve, l'impact de cette connaissance anterieure dans l'elaboration de la solution et ainsi prevenir la construction d'une conception erronee? Nous avons teste nos

Study: control of atomic energy power plant; Etude de la regulation d'une installation atomique productrice d'energie

Energy Technology Data Exchange (ETDEWEB)

Dautray, R; Leny, J C [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

1958-07-01

We are studying the control of a very flexible atomic power plant, able to supply an independent network. Two systems have been examined: in the first the moderator pre-heats the light water, in the second, this preheating is dispensed with, subsequent to a study of the dynamics of the plant. Very complete linear approximation study is being effected on the model of the second system, all effects being taken into account. The reactor is stable at all power levels, though slight reactivity or load variations cause undamped power oscillations around the equilibrium level. (author)Fren. [French] Nous etudions la regulation d'une installation atomique d'une grande souplesse, pouvant eventuellement fournir de l'energie a un reseau isole. Deux versions de l'installation sont etudiees: dans la premiere le moderateur sert a rechauffer l'eau industrielle, mais l'etude dynamique conduit a supprimer ce rechauffage, ce qui donne la deuxieme version. On effectue sur celle-ci une etude en approximation lineaire tres complete ou l'on tient compte de differents effets. L'installation se montre stable a tous les niveaux de puissance. Toutefois, de petites perturbations de reactivite ou de charge entrainent des oscillations de puissance mal amorties autour de la position d'equilibre. (auteur)

Marketing information system - concept and components

Directory of Open Access Journals (Sweden)

Domazet Ivana S.

2003-01-01

Full Text Available Current conditions for the carrying out of business activities are being characterized by an intensive changing of the business surrounding, as well as by a need for a flexible adapting to the newly-created conditions. Dynamisation of economic ambience, based on the principles of a propulsive marketing economy is affirming a business philosophy which will be based on requests of the strategic marketing. Vital component of every successful company is information system, which helps data acquisition and analysis, and its transfer into information, which is then forwarded to users and management. Bearing that in mind, we have created marketing information system, which collects relevant data, analyses it and then produces information, which can be used in planning, implementation and control, those making your company more efficient.

The study of neutron transport by oscillation method; Etude du transport des neutrons par la methode de modulation

Energy Technology Data Exchange (ETDEWEB)

Raievski, V

1959-07-01

The oscillation method is of very general use for studying the behavior of thermal neutrons in media. The main experiments are described and a general theory of them is given. This theory, which is presented in the first part, is established using the two-group approximation which has proved its efficiency in the case of thermal neutron piles. The validity of the two-group approximation is recalled. This allows definition of the meaning of the parameters used in the theory and which are measured in these experiments. The experiments carried out by this method are described, especially those performed at the Centre d'Etudes Nucleaires de Saclay where the method has been extensively used. These experiments are interpreted by means of the general theory given previously. In this way, the identity of parameters measured by this method and those given by the theory is proved. This is particularly conclusive is the case of the mean life of neutrons in a pile. (author) [French] La methode de modulation est un procede tres general d'etude des proprietes neutroniques des milieux contenant des neutrons thermiques. Le present rapport a pour but de decrire les principales de ces experiences et d'en donner une theorie generale. Cette theorie, exposee dans la premiere partie, est etablie dons le cadre de l'approximation a deux groupes de vitesse qui a prouve son efficacite dons le cas des piles a neutrons thermiques. Le domaine de validite de l'approximation a deux groupes est rappele au debut, ce qui permet de definir avec precision la signification des parametres qui entrent dons la theorie et qui font l'objet de ces mesures. La deuxieme partie decrit les experiences realisees, en particulier celles effectuees au Centre d'Etudes Nucleaires de Saclay ou la methode a ete considerablement developpee. Ces experiences sont interpretees dans le cadre de la theorie generale exposee precedemment. On prouve ainsi l'identite des parametres mesures par cette methode et de ceux figurant

Nanotechnology Concepts at MSFC: Engineering Directorate

Science.gov (United States)

Bhat, Biliyar; Kaul, Raj; Shah, Sandeep; Smithers, Gweneth; Watson, Michael D.

2000-01-01

Nanotechnology is the art and science of building materials and devices at the ultimate level of finesse: atom by atom. Our nation's space program has needs for miniaturization of components, minimization of weight and maximization of performance, and nanotechnology will help us get there. MSFC - Engineering Directorate (ED) is committed to developing nanotechnology that will enable MSFC missions in space transportation, space science and space optics manufacturing. MSFC-ED has a dedicated group of technologists who are currently developing high pay-off nanotechnology concepts. This poster presentation will outline some of the concepts being developed at this time including, nanophase structural materials, carbon nanotube reinforced metal and polymer matrix composites, nanotube temperature sensors and aerogels. The poster will outline these concepts and discuss associated technical challenges in turning these concepts into real components and systems.

A generative model for scientific concept hierarchies.

Science.gov (United States)

Datta, Srayan; Adar, Eytan

2018-01-01

In many scientific disciplines, each new 'product' of research (method, finding, artifact, etc.) is often built upon previous findings-leading to extension and branching of scientific concepts over time. We aim to understand the evolution of scientific concepts by placing them in phylogenetic hierarchies where scientific keyphrases from a large, longitudinal academic corpora are used as a proxy of scientific concepts. These hierarchies exhibit various important properties, including power-law degree distribution, power-law component size distribution, existence of a giant component and less probability of extending an older concept. We present a generative model based on preferential attachment to simulate the graphical and temporal properties of these hierarchies which helps us understand the underlying process behind scientific concept evolution and may be useful in simulating and predicting scientific evolution.

A generative model for scientific concept hierarchies

Science.gov (United States)

Adar, Eytan

2018-01-01

In many scientific disciplines, each new ‘product’ of research (method, finding, artifact, etc.) is often built upon previous findings–leading to extension and branching of scientific concepts over time. We aim to understand the evolution of scientific concepts by placing them in phylogenetic hierarchies where scientific keyphrases from a large, longitudinal academic corpora are used as a proxy of scientific concepts. These hierarchies exhibit various important properties, including power-law degree distribution, power-law component size distribution, existence of a giant component and less probability of extending an older concept. We present a generative model based on preferential attachment to simulate the graphical and temporal properties of these hierarchies which helps us understand the underlying process behind scientific concept evolution and may be useful in simulating and predicting scientific evolution. PMID:29474409

Readout concepts for the suppression of the slow component of BaF2 for the upgrade of the TAPS spectrometer at ELSA

Science.gov (United States)

Diehl, Stefan; Novotny, Rainer W.; Wohlfahrt, Benjamin; Beck, Reinhard

2015-02-01

For the measurement at extremely high interaction rates with fast scintillators, pile-up of consecutive events is a limiting factor. With a decay time of 600 ps of the fast crossluminescence component, Barium Fluoride (BaF2) is one of the fastest inorganic scintillators known today. However, the dominating slow component with a 3 orders of magnitude longer decay time of 630 ns limits the rate capability. To circumvent this limit, different approaches have been made in the past. The slow component can be suppressed for example by doping the crystals with rare earth ions like La3+. The paper will give an overview over the various concepts investigated in the past and present the suppression via optical band pass filters. This method has been chosen for the upgrade of the BaF2 crystals in the most forward region of the TAPS-spectrometer at ELSA in Bonn. It allows to reuse the existing crystals and to achieve a high degree of suppression of the slow component. The focus of the paper will be on the selection of the filters, the achievable rate capability and the energy resolution of the fast component.

Contribution to the study of hydrogenated and oxygenated impurities in liquid sodium; Contribution a l'etude des impuretees hydrogenees et oxygenees dans le sodium liquide

Energy Technology Data Exchange (ETDEWEB)

Naud, G [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

1964-07-15

This study is made up essentially of two parts. The first is devoted to the development of dosage methods for selectively determining the oxygenated and hydrogenated impurities present in sodium, that is the oxide, the hydride and the hydroxide. The second makes use of these methods for a study of the Na-H{sub 2}-O{sub 2} system, as well as of the related problem of the attack of pyrex glass by molten sodium. The conventional method for dosing oxygen by amalgamation was first adapted to the simultaneous measurement of the hydride. We then developed a method for dosing the total hydrogen by measuring successively the concentrations of gas present in the hydride and hydroxide form. This method is based on the thermal decomposition of the hydride and the reaction between sodium and the hydroxide. Our contribution to the study of the Na-H{sub 2}-O{sub 2} System consists first of all in the study of the reaction between hydrogen and sodium in the temperature range from 150 to 250 deg C and at a pressure of about 150 mm of mercury. The study of the thermal decomposition of the hydride in sodium was then studied. It was possible to make some qualitative observations concerning the reaction between sodium and sodium hydroxide. Finally some complementary tests made it possible to define the nature of the phenomena occurring during the attack of pyrex glass by sodium. (author) [French] Cette etude comporte essentiellement deux parties. La premiere est consacree a la mise au point de methodes de dosages permettant de determiner selectivement les impuretes oxygenees et hydrogenees presentes dans le sodium, a savoir l'oxyde, l'hydrure et l'hydroxyde. La seconde met a profit ces methodes en vue de l'etude du systeme Na-H{sub 2}-O{sub 2}. ainsi que du phenomene connexe d'attaque du verre pyrex par le sodium fondu. La methode classique de dosage de l'oxygene par amalgamation a d'abord ete adaptee au dosage simultane de l'hydrure. Nous avons ensuite mis au point le dosage de l

Some equipment for graphite research in swimming pool reactors; Quelques dispositifs d'etude du graphite dans les piles piscines

Energy Technology Data Exchange (ETDEWEB)

Seguin, M; Arragon, Ph; Dupont, G; Gentil, J; Tanis, G [Commissariat a l' Energie Atomique, Grenoble (France). Centre d' Etudes Nucleaires

1964-07-01

The irradiation devices described are used for research concerning reactors of the natural uranium type, moderated by graphite and cooled by carbon dioxide. The devices are generally designed for use in swimming pool reactors. The following points have been particularly studied: - maximum use of the irradiation volume, - use of the simplest technological solutions, - standardization of certain constituent parts. This standardization calls for precision machining and careful assembling; these requirements are also true when a relatively low irradiation temperature is required and the nuclear heating is pronounced. Finally, the design of these devices is suitable for the irradiation of other fissile or non-fissile materials. (authors) [French] Les dispositifs d'irradiation decrits servent aux etudes relatives a la filiere des reacteurs a uranium naturel, moderes au graphite et refroidis par le gaz carbonique. Ils sont generalement concus pour etre utilises dans des piles piscines. L'accent a ete mis sur: - l'utilisation au maximum du volume d'irradiation, - le recours aux solutions technologiques les plus simples, - la standardisation de certaines parties constitutives. Cette standardisation impose un usinage precis et un montage soigne, lesquels sont egalement necessaires lorsqu'on doit obtenir une temperature d'irradiation relativement basse alors que l'echauffement nucleaire est important. Enfin, la conception de ces dispositifs est valable pour irradier d'autres materiaux non fissiles ou fissiles. (auteurs)

A review of micro-wave techniques in plasma studies; Survol des techniques micro-ondes pour l'etude des plasmas

Energy Technology Data Exchange (ETDEWEB)

Consoli, T [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

1964-07-01

The problem of the application of micro-wave techniques to the study of plasma properties is considered in this report. In section I, the author summarizes a few fundamental laws concerning the theory of waves in an ionised medium as well as measurable effects of transverse and longitudinal propagation. Section II is a rapid review of the experimental methods and of the various measurements which may be effected in very high frequency plasmas. Only recent experimental work carried out since the last U. R.S.I. Assembly is considered. Section III is devoted to micro-wave techniques developed during this period in the laboratories of the Applied Physics Service. These techniques deal with longitudinal propagation and in particular with the propagation along a right mode. Section IV is a general view of similar studies undertaken in European Research Centres working on plasma physics or controlled fusion. Section V is a contribution concerning three particular topics from the Juelich and Max Planck Institute laboratories. (author) [French] On etudie dans ce rapport le probleme de l'application des techniques micro-ondes a l'etude des proprietes d'un plasma. Dans la section I, l'auteur rappelle rapidement quelques lois fondamentales de la theorie des ondes dans un milieu ionise ainsi que les effets mesurables en propagation transversale et longitudinale. La section II est une revue rapide des methodes experimentales et des diverses mesures qui peuvent etre faites dans les plasmas aux tres hautes frequences. On ne considere seulement que les etudes experimentales recentes depuis la derniere assemblee de l'U.R.S.I. La section III est consacree aux techniques hyperfrequences developpees durant la meme periode dans les laboratoires des Services de Physique Appliquee. Ces techniques se rapportent a la propagation longitudinale et particulierement a la propagation suivant le mode droit. La section IV est un panorama de travaux similaires entrepris dans les centres europeens

Nuclear heat source component design considerations for HTGR process heat reactor plant concept

International Nuclear Information System (INIS)

McDonald, C.F.; Kapich, D.; King, J.H.; Venkatesh, M.C.

1982-01-01

Using alternate energy sources abundant in the U.S.A. to help curb foreign oil imports is vitally important from both national security and economic standpoints. Perhaps the most forwardlooking opportunity to realize national energy goals involves the integrated use of two energy sources that have an established technology base in the U.S.A., namely nuclear energy and coal. The coupling of a high-temperature gas-cooled reactor (HTGR) and a chemical process facility has the potential for long-term synthetic fuel production (i.e., oil, gasoline, aviation fuel, hydrogen, etc.) using coal as the carbon source. Studies are in progress to exploit the high-temperature capability of an advanced HTGR variant for nuclear process heat. The process heat plant discussed in this paper has a 1170-MW(t) reactor as the heat source and the concept is based on indirect reforming, i.e., the high-temperature nuclear thermal energy is transported (via an intermediate heat exchanger (IHX)) to the externally located process plant by a secondary helium transport loop. Emphasis is placed on design considerations for the major nuclear heat source (NHS) components, and discussions are presented for the reactor core, prestressed concrete reactor vessel (PCRV), rotating machinery, and heat exchangers

Cognitive Architecture of Common and Scientific Concepts

Science.gov (United States)

Tarábek, Paul

2010-07-01

The cognitive architecture of concept is a specific structure consisting of the concept core, concept periphery, the semantic frame as the meaning and the sense of the concept, and the relations among all components of this structure. The model of the cognitive architecture of scientific and common concepts is a conceptual meta-model built upon Vygotsky's concept theory, Fillmore's semantic frame, semantic triangle, on widespread ideas of the structuring of conceptual systems, and the Hestenes' Modeling Theory. The method of semantic mapping of concepts flowing from the model is designed.

A simple, robust and reliable wind diesel concept for remote power supply

DEFF Research Database (Denmark)

Lundsager, P.; Bindner, H.

1994-01-01

The paper introduces a Wind Diesel concept suitable for remote communities, the 'Simple, Robust and Reliable Concept' developed at Riso. All components are standard components, the system is self regulating using the component controllers and there is no power electronics. The paper documents...

Mechatronic blockset for Simulink-concept and implementation

DEFF Research Database (Denmark)

Ravn, Ole; Szymkat, Maciej; Uhl, T.

1996-01-01

The paper describes the design considerations for modelling and simulation of mechatronic systems. The system is based on a component concept enabling the designer to pick component models that match the physical components of the setup to be modelled from a block library. Another important feature...... and for the whole model. This library that can be extended by the user contains standard components, such as DC-motors, potentiometers, encoders, pneumatic elements, and a Maple based facility to generate symbolic equations of motion. To evaluate the concepts the mechatronic Simulink library blockset has been...... implemented as a prototype based on MATLAB and Simulink and has been used to model several mechatronic systems. The library is presently being tested in different projects...

The Relationship among Self-Concept, Self-Efficacy, and Performance in Mathematics during Secondary School.

Science.gov (United States)

Pietsch, James; Walker, Richard; Chapman, Elaine

2003-01-01

Examines the relationship among self-concept, self-efficacy, and performance in mathematics among 416 high school students. Confirmatory factor analyses supported the existence of two self-concept components--a competency component and an affective component. Self-efficacy items and the competency items of self-concept also loaded on a single…

Agent And Component Object Framework For Concept Design Modeling Of Mobile Cyber Physical Systems

Science.gov (United States)

2018-03-01

base design, service-oriented architecture (SOA) and enterprise architecture , brought a new emphasis on business processes and business organization...there are some useful concepts that can be leveraged into an MIGVS architecture . The concept of modeling operational or business behavior logic as...Design 1. Explicit meta model for architecture concepts and relationships 2. Support business or operational modeling and associated events 3

Preliminary study of the preparation of uranium 232 by irradiation of protactinium 231; Etude preliminaire a la preparation d'uranium 232 par irradiation de protactinium 231

Energy Technology Data Exchange (ETDEWEB)

Guillot, Ph. [Commissariat a l' Energie Atomique, Fontenay aux Roses (France). Centre d' Etudes Nucleaires

1965-07-01

A bibliography about preparation of uranium 232 is done. This even-even isotope of uranium is suitable for radioactive tracer, neutron source through {alpha},n reaction and heat source applications. The irradiation of protactinium 231, the chemical separation and the purification of uranium are studied. (author) [French] Une etude bibliographique de la preparation d'uranium 232 a ete effectuee. Cet isotope pair-pair de l'uranium peut etre utilise en tant que traceur, source d'energie et source de neutrons, lorsqu'il est melange a un element leger tel le beryllium. Une etude du taux de formation des isotopes produits, lors de l'irradiation du protactinium 231 - une des manieres d'obtenir l'uranium 232 - a ete faite a l'aide d'un programme passe sur ordinateur. Les problemes poses par la separation chimique et la purification de l'uranium ont ete egalement envisages dans ce rapport. (auteur)

The ultrasonic copper and brass decontamination study; Etude de la decontamination du cuivre et des laitons en presence d'ultra-sons

Energy Technology Data Exchange (ETDEWEB)

Courtault, J; Kerdelleau, J de; Mestre, E [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

1965-07-01

The use of ultra-sounds as a decontamination technic does not bring an absolute solution. As a function of the materials it seemed necessary to find what was the optimum conditions for using the ultra-sounds and to define not only the ultra-sonic factors but also the chemical solutions which bring some appreciable decontamination factors without bringing any too important corrosion processus. This report gives the results of this study applied to copper and brass. This study allowed to select some effective treatment baths on the two types of contamination: plutonium and fission products. (authors) [French] L'emploi des ultra-sons comme technique de decontamination n'amene pas une solution absolue. Il est apparu necessaire de rechercher en fonction de la nature du materiau a decontaminer quelles etaient les conditions optimales d'utilisation des ultra-sons et de definir alors non seulement les facteurs ultrasoniques mais encore les solutions chimiques qui apportent des facteurs de decontamination appreciables sans amener des phenomenes de corrosion trop importants. Ce rapport donne les resultats de cette etude appliquee au cuivre et aux laitons. Cette etude a permis de selectionner des bains de traitement efficaces dans les deux cas de contamination: plutonium et produits de fission. (auteurs)

A computer code for Tokamak reactor concepts evaluation

International Nuclear Information System (INIS)

Rosatelli, F.; Raia, G.

1985-01-01

A computer package has been developed which could preliminarily investigate the engineering configuration of a tokamak reactor concept. The code is essentially intended to synthesize, starting from a set of geometrical and plasma physics parameters and the required performances and objectives, three fundamental components of a tokamak reactor core: blanket+shield, TF magnet, PF magnet. An iterative evaluation of the size, power supply and cooling system requirements of these components allows the judgment and the preliminary design optimization on the considered reactor concept. The versatility of the code allows its application both to next generation tokamak devices and power reactor concepts

Generalized structured component analysis a component-based approach to structural equation modeling

CERN Document Server

Hwang, Heungsun

2014-01-01

Winner of the 2015 Sugiyama Meiko Award (Publication Award) of the Behaviormetric Society of Japan Developed by the authors, generalized structured component analysis is an alternative to two longstanding approaches to structural equation modeling: covariance structure analysis and partial least squares path modeling. Generalized structured component analysis allows researchers to evaluate the adequacy of a model as a whole, compare a model to alternative specifications, and conduct complex analyses in a straightforward manner. Generalized Structured Component Analysis: A Component-Based Approach to Structural Equation Modeling provides a detailed account of this novel statistical methodology and its various extensions. The authors present the theoretical underpinnings of generalized structured component analysis and demonstrate how it can be applied to various empirical examples. The book enables quantitative methodologists, applied researchers, and practitioners to grasp the basic concepts behind this new a...

Study of thermocouples for control of high temperatures; Etude de thermocouples pour le reperage des hautes temperatures

Energy Technology Data Exchange (ETDEWEB)

Villamayor, M [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires; Faculte des Sciences de l' Universite de Lyon - 69 (France)

1967-07-01

Previous works have shown that the tungsten-rhenium alloys thermocouples were a good instrument for control of high temperatures. From its, the author has studied the W/W 26 per cent and W 5 per cent Re/W 26 per cent Re french manufactured thermocouples and intended for control of temperatures in nuclear reactors until 2300 deg. C. In 'out-pile' study he determines the general characteristics of these thermocouples: average calibration curves, thermal shocks influence, response times, and alloys allowing the cold source compensation. The evolution of these thermocouples under thermal neutron flux has been determined by 'in-pile' study. The observations have led the author to propose a new type of thermocouples settled of molybdenum-columbium alloys. (author) [French] Des travaux anterieurs ont montre que les thermocouples des alliages tungstene-rhenium etaient susceptibles de reperer avec precision des hautes temperatures. A partir de la, l'auteur a etudie las thermocouples W/W 26 pour cent Re et W 5 pour cent Re/W 26 pour cent Re de fabrication francaise et destines au controle des temperatures dans les reacteurs nucleaires, jusqu'a 2300 deg. C Dans l'etude 'hors-pile' il a determine les caracteristiques generales de ces thermocouples: courbes d'etalonnage moyen, influence des chocs thermiques, temps de reponse, et alliages assurant la compensation de soudure froide. L'etude 'en-pile' a permis de rendre compte de l'evolution de ces thermocouples sous flux neutroniques. Les phenomenes observes ont conduit l'auteur a proposer un nouveau type de thermocouples constitues d'alliages molybdene-niobium. (auteur)

Study of {gamma}'s in Naiade; Etude des gamma de Naiade

Energy Technology Data Exchange (ETDEWEB)

Millot, J P; Rastoin, J [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

1958-07-01

Following a study of the gamma sources, the flux of gamma of different energies in the swimming pool is investigated. The biological dose can thus be obtained by calculation, and compared with the results given by photographic plates. The influence of photoneutrons is estimated by calculation, and research is being carried out on their influence on the thermal neutron flux curve on the axis of the uranium plate, with the plate emitting neutrons and with the plate protected by boral. (author) [French] Apres l'etude des sources de gamma, l'on etudie le flux de gamma de differentes energies dans la piscine. La dose biologique peut etre obtenue ainsi par le calcul et comparee avec les resultats donnes par les plaques photographiques. L'influence des photoneutrons est estimee par le calcul et l'on recherche leur influence sur la courbe de flux de neutrons thermiques sur l'axe de la plaque d'uranium, la plaque emettant des neutrons et la plaque protegee par du boral. (auteur)

A crystallographic and spectroscopic study of crystal sites in the 'spinel' structure; Etude cristallographique et spectroscopique des sites cristallins dans la structure 'spinelle'

Energy Technology Data Exchange (ETDEWEB)

Drifford, M [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

1967-06-15

A crystallographic study on magnesium aluminates led to the determination of crystal site average distortion. A spectroscopic study of transition elements doped spinels gave the position of the doping element in tetrahedral (A) or octahedral (B) sites, and the local distortion of the latter. The comparison of average and local parameters points to differences in the behaviour of doping elements and shows the size of (A) sites are independent of the host crystal composition while the average size of (B) sites varies with the composition. (author) [French] Une etude cristallographique des aluminates de magnesium a permis de determiner la deformation moyenne des sites cristallins. Une etude spectroscopique des aluminates de magnesium dopes avec des elements de transition a permis de localiser les dopants entre les sites tetraedriques (A) et octaedriques (B) et d'etudier la deformation locale de ces sites. La comparaison entre les parametres moyens et locaux a caracterise le comportement du dopant et montre que les dimensions des sites (A) sont independantes de la composition de la matrice, alors que les caracteristiques geometriques moyennes des sites (B) varient continument avec la composition. (auteur)

The Leadership Concept in The Babad Banyumas

Directory of Open Access Journals (Sweden)

Darmawan Edi Winoto

2017-12-01

Full Text Available This article focuses on the characteristics of leadership concepts in Babad Banyumas. The purpose of this study was to identify the concept of leadership in Babad Banyumas. The data were obtained through the Babad Banyumas itself. The text analysis technique was used in this research. The text analysis was done by structural analysis approach which focuses on the leadership concept. The study results show that the Babad Banyumas text presents a leadership model with different characteristics from that of Javanese leadership in general. Leadership Banyumas was analyzed through four components, namely charisma, authority, power, and dominance in a special sense. In term of charisma, a person becomes a king because besides the heredity, it is also due to the factor of hard work through tapa brata (meditating. Then, the authority component, the king is soft in interpretation any persuasion and tends to be democratic. In the concept of power, the king's leadership more emphasizes on moral orientation, not myth. Components of dominance in a special sense, emphasizing the mobilization of time or giving orders without sanctions, so that the command is done without any force.

Study of radio-active ions in the atmosphere; Etude des ions radioactifs de l'atmosphere

Energy Technology Data Exchange (ETDEWEB)

Renoux, A [Commissariat a l' Energie Atomique, Fontenay-aux-Roses (France). Centre d' Etudes Nucleaires

1965-01-01

A comparative study is made of active, deposits of radon and thoron in suspension in the atmosphere by means of {alpha} radiation counting, using ZELENY tubes, scattering equipment, filter papers or membranes. It has been possible to show the existence of small and large ions which are negative and positive, as well as of neutral radio-active nuclei; their properties are studied. A theoretical interpretation of the results is presented. The average content of radon (using the Ra A concentration) and of Th B in the air has been determined. The radioactive equilibrium between radon and its daughter products in atmospheric air are examined. The techniques developed for active radon and thoron deposits are applied to the study of artificial radio-activity, the analyses being carried out by means of {gamma} spectrometry. (author) [French] On effectue une etude comparative entre les depots actifs du radon et du thoron en suspension dont l'atmosphere a l'aide de comptages de rayonnement {alpha}, en utilisant des tubes de ZELENY, une batterie de diffusion, des papiers filtres ou des membranes. On met ainsi en evidence la presence de petits et gros ions negatifs et positifs, ainsi que celle de noyaux neutres radioactifs, et on etudie leurs proprietes. Une Interpretation theorique des resultats obtenus est developpee. On determine la teneur moyenne de l'air en radon (a partir de la concentration en Ra A) et en Th B. L'equilibre radioactif entre le radon et ses descendants, dans l'air atmospherique, est examine. Les Techniques mises au point pour les depots actifs du radon et du thoron sont appliquees a l'etude de la radioactivite artificielle, les depouillements s'effectuant par spectrometrie {gamma}. (auteur)

Etude de la transition ferroelectrique-ferroelastique du KD2PO4 forme du front de phase en fonction du gradient thermique

OpenAIRE

Kvítek, Zdeněk

2010-01-01

Etude de la transition ferroelectrique-ferroelastique du KD2PO4 forme du front de phase en fonction du gradient thermique The thesis explores complex process of first order transition of KD2PO4 crystal from tetragonal phase to ferroelectric - ferroelastic orthorhombic phase and back at temperature 209 K. The experimental set up of nitrogeneous cryostat allowes temperature and temperature gradient variations during simultaneous three axes optical sample observations, dielectric measurements. T...

Baby fission chambers; Etude de chambres a fission miniatures

Energy Technology Data Exchange (ETDEWEB)

Guery, U; Tachon, J [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

1957-07-01

The present report is intended, on the one band, as a study of the main types of fission chambers produced to date, and on the other, to deal more generally with this type of detector. Originally, it was with a view to the charting of neutron scatter in 'Proserpine' that the authors undertook the study of these chambers. During the course of the task, it was considered worth tbe trouble of developing its scope to include a more general application: neutron scatter measurement of various energy neutrons within a reduced volume with slight local disturbance. (author) [French] Le present rapport se propose, d'une part, d'exposer les principales realisations de chambres a fission, d'autre part de faire une mise au point a caractere plus general sur ces detecteurs. Au depart, c'est surtout en vue des mesures de densite neutronique dans 'Proserpine' que les auteurs ont etudie ces chambres; au cours de la mise au point, il a paru interessant de developper leur etude pour des applications plus generales: mesures de densites de neutrons de differentes energies dans un element de volume tres reduit et avec faible perturbation locale. (auteur)

Alecto 2 - interaction studies; Alecto 2 - etudes d'interaction

Energy Technology Data Exchange (ETDEWEB)

Brunet, J P; Clouet d' Orval, Ch; Mougniot, J C; Penet, F [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

1965-07-01

Weak interactions were experimentally studies with the tank of the critical assembly Alecto II and one, two or three bottles containing solutions of various concentrations. In particular, was studied the validity of certain classical assumptions, shielding effects, screening and semi-reflexion effects, importance of thermal coupling. The method of the 'k{sub eff}, solid angle' is shown to apply to such a system. The determination by divergence and pulsed neutron technique of the reactivity related to a millimeter of solution level affords the obtention of critical heights in terms of reactivity. (authors) [French] Une etude experimentale d'interactions faibles a ete faite entre la cuve de l'experience critique ALECTO II et une, deux ou trois bouteilles contenant des concentrations variees. On etudie, en particulier, la validite de certaines hypotheses classiques, effets d'ombre, d'ecrans, de semi-reflexion, importance du couplage thermique. On montre d'autre part que la methode du 'K{sub eff}, angle solide' peut s'appliquer a un tel systeme. La determination par divergence et neutrons pulses de la reactivite liee au millimetre de solution permet de traduire les hauteurs critiques obtenues, en terme de reactivite. (auteurs)

Study of the {sup 14}C benzimidazole distribution in mice after inter-peritoneal injection; Etude de la repartition du benzimidazole {sup 14}C chez la souris apres injection intraperitoneale

Energy Technology Data Exchange (ETDEWEB)

Tyortyalian, C [Commissariat a l' Energie Atomique, Grenoble (France). Centre d' Etudes Nucleaires

1965-07-01

In order to provide further information on the mechanism of benzimidazole radioprotective activity, this work studies the tissual repartition in mice of this compound labelled with carbon 14. Experiments have showed that benzimidazole distribution is fast and homogeneous in all the tissues, but however affinity appears at the level of stomach and gastric content. Elimination is made through the urinary system and is very fast. (author) [French] Dans le cadre de l'etude du mecanisme de l'action radioprotectrice du benzimidazole, ce travail a pour objet l'etude de la repartition tissulaire chez la souris de ce compose marque au carbone 14. L'experimentation a montre que le benzimidazole se repartit tres rapidement et de facon pratiquement homogene dans tous les tissus, avec toutefois une affinite paraissant se manifester au niveau de l'estomac et du contenu gastrique. L'elimination, qui se fait par voie urinaire, est tres rapide. (auteur)

Development of a gas-ionization {beta}-spectrometer; Etude et realisation d'un spectrometre {beta} a ionisation gazeuse

Energy Technology Data Exchange (ETDEWEB)

Le Du, R [Commissariat a l' Energie Atomique, Bruyeres-le-Chatel (France). Centre d' Etudes

1968-05-15

We intend to develop in our laboratory a {beta}-spectrometer. This apparatus will have two main objectives: 1 - the determination of the nature and the degree of purity of certain {beta}-emitting radioactive substances; 2 - the study of an activity calibration process for {beta}-emitting radioactive sources. (author) [French] Nous nous proposons d'etudier et de realiser dans notre laboratoire un spectrometre {beta}. Cet appareil aura deux buts principaux: 1 - determiner la nature et le degre de purete de certains corps radioactifs emetteurs {beta}; 2 - permettre l'etude d'un procede d'etalonnage en activite de sources radioactives emetteurs {beta}. (auteur)

Compatibility and testing of electronic components

CERN Document Server

Jowett, C E

2013-01-01

Compatibility and Testing of Electronic Components outlines the concepts of component part life according to thresholds of failure; the advantages that result from identifying such thresholds; their identification; and the various tests used in their detection. The book covers topics such as the interconnection of miniature passive components; the integrated circuit compatibility and its components; the semiconductor joining techniques; and the thin film hybrid approach in integrated circuits. Also covered are topics such as thick film resistors, conductors, and insulators; thin inlays for el

Data governance implementation concept

OpenAIRE

Ullrichová, Jana

2016-01-01

This master´s thesis discusses concept of implementation for data governance. The theoretical part of this thesis is about data governance. It explains why data are important for company, describes definitoons of data governance, its history, its components, its principles and processes and fitting in company. Theoretical part is amended with examples of data governance failures and banking specifics. The main goal of this thesis is to create a concept for implementing data governance and its...

Experimental study of the hydrodynamic instabilities occurring in boiling-water reactors; Etude experimentale des instabilites hydrodynamiques survenant dans les reacteurs nucleaires a ebullition

Energy Technology Data Exchange (ETDEWEB)

Fabreca, S [Commissariat a l' Energie Atomique, Grenoble (France). Centre d' Etudes Nucleaires

1964-10-01

The subjects is an experimental out-of pile loop study of the hydrodynamic oscillations occurring in boiling-water reactors. The study was carried out at atmospheric pressure and at pressure of about 8 atmospheres, in channels heated electrically by a constant and uniform specified current. In the test at 8 atmospheres the channel was a round tube of approximately 6 mm interior diameter. At 1 atmosphere a ring-section channel was used, 10 * 20 mm in diameter, with an inner heating tube and an outer tube of pyrex. It was possible to operate with natural convection and also with forced convection with test-channel by-pass. The study consists of 3 parts: 1. Preliminary determination of the laws governing pressure-drop during boiling. 2. Determination of the fronts at which oscillation appears, within a wide range of the parameters involved. 3. A descriptive study of the oscillations and measurement of the periods. The report gives the oscillation fronts with natural and forced convection for various values of the singular pressure drop at the channel inlet and for various riser lengths. The results are presented in non-dimensional form, which is available, in first approximation, for all geometric scales and for all fluids. Besides the following points were observed: - the wall (nature and thickness) can be an important factor ; - oscillation can occur in a horizontal channel. (author) [French] II a ete effectue une etude experimentale, en boucle hors-pile, des oscillations hydrodynamiques survenant dans les reacteurs a ebullition. L'etude a ete effectuee a la pression atmospherique et a une pression voisine de 8 atmospheres dans des canaux chauffes electriquement a puissance imposee constante et uniforme. Dans les essais a 8 atmospheres le canal etait un tube circulaire de diametre interieur 6 mm environ. A 1 atmosphere le canal etait de section annulaire 10 * 20 mm avec un tube interieur chauffant et un tube exterieur en pyrex. Le fonctionnement etait possible en

Use of hydraulic and aerial mock up to study atmospheric pollution; L'utilisation des maquettes aeriennes et hydrauliques pour l'etude de la pollution atmospherique

Energy Technology Data Exchange (ETDEWEB)

Facy, L; Perrin De Brichambaut, C; Doury, A; Le Quinio, R

1962-07-01

Fundamental studies on turbulent atmospheric diffusion of finely divided particles, cannot remain on a purely theoretical basis. Further experimental studies must be considered. - In full scale, from accidental and induced releases. - On a reduced scale, in aerodynamic wind tunnels or hydraulic water tunnels. A first set of studies on reduced scale models has been worked out according to a contract between French 'Meteorologie Nationale' and French 'Commissariat a l'Energie Atomique' and with the Collaboration of Saint-Cyr 'Institut Aerotechnique'. Essentially two kinds of results have been obtained: - The mathematical model of SUTTON for the turbulent diffusion in the atmosphere, deduced from the SUTTON theory, generally used by us, has been correctly verified, qualitatively and quantitatively whenever experiments were consistent with the theory conditions. - The quantitative assays of photographic and cinematographic visualization have given precise details on the phenomena inaccessible to calculations, due to the influence of obstacles and release conditions. - Generally, it can be asserted, that the atmospheric pollution studies are worked out by mock up experimentations and that, in some cases these experiments never can be replaced by mathematically pure models. (authors) [French] Les etudes fondamentales portant sur la diffusion turbulente dans l'atmosphere de quantites de matieres finement divisees, ne peuvent se maintenir sur un plan exclusivement theorique. C'est pourquoi des etudes experimentales complementaires doivent etre obligatoirement envisagees: - en vraie grandeur, a partir d'emissions accidentelles ou provoquees; - sur modeles reduits, en soufflerie aerodynamique ou en veine hydraulique. En ce qui concerne les modeles reduits, une premiere serie d'etudes a pu etre menee a bien, dans le cadre d'un contrat passe entre la Meteorologie Nationale et le Commissariat a l'Energie Atomique, et avec la collaboration de l'Institut Aerotechnique de Saint

The effects of attachment components on formal-operational thinking

OpenAIRE

Vukčević Branimir

2010-01-01

In this work our aim is to examine how the components of attachment influence the thinking development of adolescents in familial context. We investigated the components of attachment: unresolved family traumatisation, the use of external security base, fear of loss of external security base, negative self concept, negative other concept, capacity for mentalisation, low control of anger. We used a revised Questionnaire for Assessment of Adult and Adolescent Attachment (in original: UPIPAV-R)....

Conception and fabrication of a real time automatic correlator (multi-correlator); Etude et realisation d'un correlateur automatique (multicorrelateur) fonctionnant en temps reel

Energy Technology Data Exchange (ETDEWEB)

Berthier, D [Commissariat a l' Energie Atomique, Grenoble (France). Centre d' Etudes Nucleaires

1967-10-01

The purpose of this work is to elaborate a specific computer able to display the real.time correlation function of two variables represented by two electrical signals. The various functions to be done are dealt with the best suited technology: delays from numerical method, hybrid multiplication, analog integration. This method proved very versatile so that it has been possible to modify the circuits with more performing components without changing the general conception of the whole system. In particular, the bandwidth, which was originally 125 kHz (1966) is now 1 MHz and will be 5 MHz, January 1968. Many results are obtained from the correlator such as: - determination of pulse responses of linear systems (1. and 2. order filters, oscillating circuits); - extraction of signals from noise; - measurement of time and space correlation in a turbulent plasma; - treatment of electro-biological signals. (author) [French] Nous nous sommes proposes de concevoir un calculateur specialise pour l'estimation en temps reel de la fonction de correlation de deux phenomenes representes par deux tensions electriques. Il a ete retenu les procedes de calcul s'adaptant le mieux aux diverses fonctions a realiser: retard par une technique numerique, multiplication hybride, integration analogique. Cette methode s'est revelee tres souple d'emploi: en effet les circuits ont pu etre modifies, sans changer la conception de l'appareil, au fur et a mesure de l'evolution des performances des composants electroniques. Ainsi la bande passante de l'appareil qui initialement etait de 125 KHz (1966) est actuellement de 1 MHz et sera 5 MHz en janvier 1968. De nombreux resultats ont ete obtenus avec l'appareil: - determination de reponses impulsionnelles de systemes lineaires (filtres 1er ordre, 2eme ordre, circuit oscillant, etc... ); - detection de signaux dans le bruit; - mesure de correlation spatiale et temporelle dans le plasma - traitement de signaux electrobiologiques. (auteur)

A microcosm of musical expression. I. Quantitative analysis of pianists' timing in the initial measures of Chopin's Etude in E major.

Science.gov (United States)

Repp, B H

1998-08-01

Patterns of expressive timing were measured in bars 1-5 of 115 commercially recorded performances of Chopin's Etude in E major, op. 10, No. 3. These patterns were subjected to principal components analysis, which suggested at least four independent "timing strategies": (1) major ritards at the ends of melodic gestures; (2) acceleration within some of these gestures, without final ritards; (3) extreme lengthening of the initial downbeat; and (4) ritards between as well as within melodic gestures. Strategies 1 and 4 respond in different ways to the melodic-rhythmic grouping structure of the music, and strategy 3 merely represents a local emphasis. Strategy 2 is the one most difficult to rationalize; it does not seem to represent an alternative structural interpretation of the music but rather an alternative gestural shaping. Each individual pianist's timing pattern could be described as a weighted combination of these four strategies plus idiosyncratic variation. A wide variety of combinations was represented, and no two individual patterns were exactly the same. In addition, there was a wide range of basic tempi and of degrees of tempo modulation. There were no strong relationships between any of these variables and sociocultural characteristics of the artists, although some weak trends were observed.

A Worksheet to Enhance Students’ Conceptual Understanding in Vector Components

Science.gov (United States)

Wutchana, Umporn; Emarat, Narumon

2017-09-01

With and without physical context, we explored 59 undergraduate students’conceptual and procedural understanding of vector components using both open ended problems and multiple choice items designed based on research instruments used in physics education research. The results showed that a number of students produce errors and revealed alternative conceptions especially when asked to draw graphical form of vector components. It indicated that most of them did not develop a strong foundation of understanding in vector components and could not apply those concepts to such problems with physical context. Based on the findings, we designed a worksheet to enhance the students’ conceptual understanding in vector components. The worksheet is composed of three parts which help students to construct their own understanding of definition, graphical form, and magnitude of vector components. To validate the worksheet, focus group discussions of 3 and 10 graduate students (science in-service teachers) had been conducted. The modified worksheet was then distributed to 41 grade 9 students in a science class. The students spent approximately 50 minutes to complete the worksheet. They sketched and measured vectors and its components and compared with the trigonometry ratio to condense the concepts of vector components. After completing the worksheet, their conceptual model had been verified. 83% of them constructed the correct model of vector components.

Contribution to the study on the flow rate adjustment for gas cooled power reactors (1964); Contributiom a l'etude de reglage du debit pour les reacteurs industriels refroidis par gaz (1964)

Energy Technology Data Exchange (ETDEWEB)

Milliot, B [Commissariat a l' Energie Atomique, Fontenay-aux-Roses (France). Centre d' Etudes Nucleaires

1961-06-15

1. This original study firstly defines the problem of the adjustment of the coolant flow rate in a reactor channel as a function of the corresponding heat transfer equations and of the local and temporal neutron flux. The necessity of such an adjustment is pointed out and the modifying parameters are studied. An adjustment study using the envelope of the possible flux curves is developed. A short study on the technology and the economical advantage of this adjustment is presented. Some measurements, made on G-1 and G-2, show the precision one can obtain from adjustment apparatus itself as well as from the complete reactor adjustment system. 2. Evolution of nuclear properties of fuel in an heterogeneous thermal reactor. In the first port of this paper, the phenomena of fuel evolution have been mainly pointed out. Now a bibliographical study more qualitatively than quantitatively has been done. This survey specifies the present theories and relates to a real effective cross section and also yields to the bases of such a nuclear calculation. (author) [French] 1. Cette etude originale definit d'abord le probleme du reglage du debit de refrigerant dans un canal de reacteur en fonction de la formulation du calcul des performances thermodynamiques de ce canal et des variations du flux neutronique dans l'espace et le temps. La necessite du reglage est ensuite mise en evidence et les parametres le modifiant sont etudies. Une methode de reglage, basee sur l'emploi d 'une courbe enveloppe des courbes de flux possibles, est donnee. Une breve etude de la technologie et des incidences economiques du reglage est presentee. Des mesures effectuees sur les reacteurs G-1 et G-2 montrent la precision que l'on peut attendre des dispositifs de reglage comme du reglage d'ensemble du reacteur lui-meme. 2. Evolution des proprietes nucleaires du combustible dans un reacteur heterogene a neutrons thermiques. Les phenomenes d'evolution du combustible tiennent une place importante dans l'etude

Magnetic study of solid uranium-fluorine complexes; Contribution a l'etude magnetique de composes fluores solides de l'uranium

Energy Technology Data Exchange (ETDEWEB)

Dianoux, A J [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

1969-06-01

A study of the magnetic susceptibility of uranium V fluorine complexes and of the magnetic resonance of fluorine atoms in uranium VI fluorine complexes has made it possible to put forward a structural model for these compounds for which it is impossible, because of the lack of suitable single crystals for X-ray diffraction work, to deduce the exact position of the fluorine atoms. It is shown that it is difficult to interpret the paramagnetism of uranium fluorides, because the uranium ions are in low-symmetry sites. A theoretical study of the magnetism of the U{sup V} ion in complex fluorides of the type M{sub 3}UF{sub 8} (M = NH{sub 4}, Na, Rb, Cs) leads to an interpretation based on a trigonal deformation of the eight fluorine atom structure surrounding the uranium atom. By applying a Hamiltonian spin formalism and making a systematic use of group theory, it is possible to present the susceptibility calculations very concisely. Study of the resonance and of the relaxation of the fluorine atoms in powdered uranium VI complex fluorides suggests a structural model in the case of NaUF{sub 7}. It is shown that the shape of the magnetic resonance absorption lines is strongly affected by the presence of large anisotropic chemical shifts. In the model proposed here, six fluorine atoms are linked to the uranium, atom by strongly covalent bonds in a deformed UF{sub 6} octahedral structure; the seventh fluorine atom remains ionic. The occurrence of a rotational movement of the octahedron is confirmed by a study of the longitudinal relaxation of the fluorine atoms, the activation energy being 0.46 eV. (author) [French] L'etude de la susceptibilite magnetique de complexes fluores d'uranium V et la resonance magnetique des fluors dans des complexes fluores d'uranium VI permettent de proposer un modele structural pour ces composes, ou la diffraction des rayons X, en l'absence de monocristaux convenables, est incapable de preciser la position des atomes de fluor. Nous montrons

An economic study of the site of Marcoule; Etude economique du site de Marcoule

Energy Technology Data Exchange (ETDEWEB)

Duprat, H [Commissariat a l' Energie Atomique, Marcoule (France). Centre d' Etudes Nucleaires

1964-07-01

The study of this site of the Marcoule Center shows that its regional economical influence is limited to the buying power distributed among its personnel. This entails distortions between first this supplementary buying power and the overall markets within the possible Marcoule influence zone, and secondly the concentration on Bagnols-sur-Ceze and this town's normal extension possibilities. (author) [French] L'etude du site de Marcoule demontre que son influence economique se limite, pour la region, au pouvoir d'achat distribue a son personnel. Ceci entraine une disproportion d'une part entre ce pouvoir d'achat supplementaire et l'ensemble des marches contenus dans l'aire d'influence possible de Marcoule, d'autre part entre la concentration realisee a Bagnole-sur-Ceze et la capacite d'extension normale de cette agglomeration. (auteur)

Concept analysis of culture applied to nursing.

Science.gov (United States)

Marzilli, Colleen

2014-01-01

Culture is an important concept, especially when applied to nursing. A concept analysis of culture is essential to understanding the meaning of the word. This article applies Rodgers' (2000) concept analysis template and provides a definition of the word culture as it applies to nursing practice. This article supplies examples of the concept of culture to aid the reader in understanding its application to nursing and includes a case study demonstrating components of culture that must be respected and included when providing health care.

A mature industrial solution for ITER divertor plasma facing components: hypervapotron cooling concept adapted to Tore Supra flat tile technology

International Nuclear Information System (INIS)

Escourbiac, F.; Missirlian, M.; Schlosser, J.; Bobin-Vastra, I.; Kuznetsov, V.; Schedler, B.

2004-01-01

The use of flat tile technology to handle heat fluxes in the range of 20 MW/m 2 with components relevant for fusion experiment applications is technically possible with the hypervapotron cooling concept. This paper deals with recent high heat flux performances operated with success on 2 identical mock-ups, based on this concept, that were tested in 2 different electron gun facilities. Each mock-up consisted of a CuCrZr heat sink armored with 25 flat tiles of the 3D carbon fibre composite material SEPcarb NS31 assembled with pure copper by active metal casting (AMC). The AMC tiles were electron beam welded on the CuCrZr bar, fins and slots on the neutral beam JET design were machined into the bar, then the bar was closed with a thick CuCrZr rear plug including hydraulic connections then the bar was electron beam welded onto the sidewalls. The testing results show that full ITER design specifications were achieved with margins, the critical heat flux limit was even higher than 30 MW/m 2 . These results highlight the high potential of this technology for ITER divertor application

A mature industrial solution for ITER divertor plasma facing components: hypervapotron cooling concept adapted to Tore Supra flat tile technology

Energy Technology Data Exchange (ETDEWEB)

Escourbiac, F.; Missirlian, M.; Schlosser, J. [Association EURATOM-CEA Cadarache, Departement de Recherches sur la Fusion Controlee, 13 - Saint Paul lez Durance (France); Bobin-Vastra, I. [AREVA Centre Technique de Framatome, 71 - Le Creusot (France); Kuznetsov, V. [Efremov Institute, Doroga na Metallostroy, St. Petersburg (Russian Federation); Schedler, B. [Plansee AG, Reutte (Austria)

2004-07-01

The use of flat tile technology to handle heat fluxes in the range of 20 MW/m{sup 2} with components relevant for fusion experiment applications is technically possible with the hypervapotron cooling concept. This paper deals with recent high heat flux performances operated with success on 2 identical mock-ups, based on this concept, that were tested in 2 different electron gun facilities. Each mock-up consisted of a CuCrZr heat sink armored with 25 flat tiles of the 3D carbon fibre composite material SEPcarb NS31 assembled with pure copper by active metal casting (AMC). The AMC tiles were electron beam welded on the CuCrZr bar, fins and slots on the neutral beam JET design were machined into the bar, then the bar was closed with a thick CuCrZr rear plug including hydraulic connections then the bar was electron beam welded onto the sidewalls. The testing results show that full ITER design specifications were achieved with margins, the critical heat flux limit was even higher than 30 MW/m{sup 2}. These results highlight the high potential of this technology for ITER divertor application.

Processing radioactive effluents with ion-exchanging resins: study of result extrapolation; Traitement des effluents radioactifs par resines echangeuses d'ions: etude de l'extrapolation des resultats

Energy Technology Data Exchange (ETDEWEB)

Wormser, G.

1960-05-03

As a previous study showed the ion-exchanging resins could be used in Saclay for the treatment of radioactive effluents, the author reports a study which aimed at investigating to which extent thus obtained results could be extrapolated to the case of higher industrial columns. The author reports experiments which aimed at determining extrapolation modes which could be used for columns of organic resin used for radioactive effluent decontamination. He notably studied whether the Hiester and Vermeulen extrapolation law could be applied. Experiments are performed at constant percolation flow rate, at varying flow rate, and at constant flow rate [French] Plusieurs etudes ont ete faites dans le but d'examiner les possibilites d'emploi des resines echangeuses d'ions pour le traitement des effluents radioactifs. Dans un rapport preliminaire, nous avons montre dans quelles limites un tel procede pouvait etre utilise au Centre d'Etudes Nucleaires de Saclay. Les essais ont ete effectues sur des petites colonnes de resine au laboratoire; il est apparu ensuite necessaire de prevoir dans quelle mesure les resultats ainsi obtenus peuvent etre extrapoles a des colonnes industrielles, de plus grande hauteur. Les experiences dont les resultats sont exposes dans ce rapport, ont pour but de determiner les modes d'extrapolation qui pourraient etre employes pour des colonnes de resine organique utilisees pour la decontamination d'effluents radioactifs. Nous avons en particulier recherche si la loi d'extrapolation de Hiester et Vermeulen qui donne de bons resultats dans le cas de fixation d'ions radioactifs en presence d'un ion macrocomposant sur des terres, pouvait etre appliquee. Les experiences, en nombre limite, ont montre que la loi d'extrapolation de Hiester et Vermeulen pouvait s'appliquer dans le cas de l'effluent considere quand les debits de percolation sont tres faibles; quand ils sont plus forts, les volumes de liquide percoles, a fixation egale, sont proportionnels aux

Cell for studying electron-adsorbed gas interactions; Cellule d'etudes des interactions electron-gaz adsorbe

Energy Technology Data Exchange (ETDEWEB)

Golowacz, H; Degras, D A [Commissariat a l' Energie Atomique, 91 - Saclay (France). Centre d' Etudes Nucleaires, Deptartement de Physique des Plasmas et de la Fusion Controlee, Service de Physique Appliquee, Service de Physique des Interractions Electroniques, Section d' Etude des Interactions Gaz-Solides

1967-07-01

The geometry and the technology of a cell used for investigations on electron-adsorbed gas interactions are described. The resonance frequencies of the surface ions which are created by the electron impact on the adsorbed gas are predicted by simplified calculations. The experimental data relative to carbon monoxide and neon are in good agreement with these predictions. (authors) [French] Les caracteristiques geometriques et technologiques generales d'une cellule d'etude des interactions entre un faisceau d'electrons et un gaz adsorbe sont donnees. Un calcul simplifie permet de prevoir les frequences de resonance des ions de surface crees par l'impact des electrons sur le gaz adsorbe. Les donnees experimentales sur l'oxyde de carbone et le neon confirment les previsions du calcul. (auteurs)

Predictive validity of Perceived Emotional Intelligence on nursing students' self-concept.

Science.gov (United States)

Augusto Landa, José María; López-Zafra, Esther; Aguilar-Luzón, Maria del Carmen; de Ugarte, Maria Fe Salguero

2009-10-01

This study examines the role of Perceived Emotional Intelligence, in nursing students' self-concept, controlling personality dimensions. Self-image is a cognitive component of the self that contains images of who we are, what we want to be and what we express and wish to express to others. Likewise, there is also an emotional and assessable component known as self-esteem. For a profession that requires not only technical expertise but also psychologically oriented care, knowledge about the self in nursing would be crucial to further development and growth of the profession. However, the role of emotions in the formation of nursing professionals has been scarcely studied. One hundred and thirty five undergraduates from nursing studies voluntarily participated in our study. They completed a questionnaire that comprises several scales. Our results show positive correlations between the Clarity and Emotional Repair components of Perceived Emotional Intelligence and all scales of the self-concept scale. Furthermore, we found positive relationships between the Extraversion and Accountability components of personality with almost all the scales of the self-concept and negative relationships with personality and neuroticism components of the self-concept.

Enterprise’s employment potential: concept, components and evaluation methods

Directory of Open Access Journals (Sweden)

Korbut K.Ye.

2017-06-01

Full Text Available The present study deals with the main interpretations and views of scientists on the economic category «labor potential». The conditions and factors affecting the labor potential are given. The author makes the classification and provides the general characteristic to the factors, which characterize the mechanism of formation of the labor potential. The detailed description of the main components and the components of the labor potential at the enterprise has been determined, analyzed and provided. The levels of the labor potential manifestation are summarized, and examined, and the explanation is given to each of them. The general characteristic of the constituent elements of workers’ labor potential is provided. The principal data of the labor potential at the micro level are provided. The main types of the labor potential at the enterprise are singled out and characterized in detail by the level of aggregated estimates, by the range of coverage of opportunities, by the nature of participation in the production and economic process and by the place in the socio-economic system of the enterprise. Considerable attention is paid to the views of scientists on the main methods of assessing the labor potential of the enterprise.

Alternative cask maintenance facility concepts

International Nuclear Information System (INIS)

Attaway, C.R.; Pope, R.B.; Wiliamson, A.C.; Medley, L.G.; Shappert, L.B.

1992-01-01

In this paper, the results of three trade-off studies of alternative concepts for performing cask maintenance for Civilian Radioactive Waste Management System casks are presented. An earlier study resulted in a recommendation that a submerged pool concept for cask internal component removal be used in the design of a Cask Maintenance Facility. The first trade-off study resulted in confirming the previous recommendation that a submerged pool concept be used rather than an isolation cell; the basis for this continued recommendation is discussed. The second study provides an evaluation of the previously proposed facility for the capability of handling an increased quantity of OCRWM casks. The third study provides a preliminary concept for adding the capability to repaint the exterior cylindrical portions of casks

Baby fission chambers; Etude de chambres a fission miniatures

Energy Technology Data Exchange (ETDEWEB)

Guery, U.; Tachon, J. [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

1957-07-01

The present report is intended, on the one band, as a study of the main types of fission chambers produced to date, and on the other, to deal more generally with this type of detector. Originally, it was with a view to the charting of neutron scatter in 'Proserpine' that the authors undertook the study of these chambers. During the course of the task, it was considered worth tbe trouble of developing its scope to include a more general application: neutron scatter measurement of various energy neutrons within a reduced volume with slight local disturbance. (author) [French] Le present rapport se propose, d'une part, d'exposer les principales realisations de chambres a fission, d'autre part de faire une mise au point a caractere plus general sur ces detecteurs. Au depart, c'est surtout en vue des mesures de densite neutronique dans 'Proserpine' que les auteurs ont etudie ces chambres; au cours de la mise au point, il a paru interessant de developper leur etude pour des applications plus generales: mesures de densites de neutrons de differentes energies dans un element de volume tres reduit et avec faible perturbation locale. (auteur)

The Large UV/Optical/Infrared Surveyor (LUVOIR): Decadal Mission concept design update

Science.gov (United States)

Bolcar, Matthew R.; Aloezos, Steve; Bly, Vincent T.; Collins, Christine; Crooke, Julie; Dressing, Courtney D.; Fantano, Lou; Feinberg, Lee D.; France, Kevin; Gochar, Gene; Gong, Qian; Hylan, Jason E.; Jones, Andrew; Linares, Irving; Postman, Marc; Pueyo, Laurent; Roberge, Aki; Sacks, Lia; Tompkins, Steven; West, Garrett

2017-09-01

In preparation for the 2020 Astrophysics Decadal Survey, NASA has commissioned the study of four large mission concepts, including the Large Ultraviolet / Optical / Infrared (LUVOIR) Surveyor. The LUVOIR Science and Technology Definition Team (STDT) has identified a broad range of science objectives including the direct imaging and spectral characterization of habitable exoplanets around sun-like stars, the study of galaxy formation and evolution, the epoch of reionization, star and planet formation, and the remote sensing of Solar System bodies. NASA's Goddard Space Flight Center (GSFC) is providing the design and engineering support to develop executable and feasible mission concepts that are capable of the identified science objectives. We present an update on the first of two architectures being studied: a 15- meter-diameter segmented-aperture telescope with a suite of serviceable instruments operating over a range of wavelengths between 100 nm to 2.5 μm. Four instruments are being developed for this architecture: an optical / near-infrared coronagraph capable of 10-10 contrast at inner working angles as small as 2 λ/D the LUVOIR UV Multi-object Spectrograph (LUMOS), which will provide low- and medium-resolution UV (100 - 400 nm) multi-object imaging spectroscopy in addition to far-UV imaging; the High Definition Imager (HDI), a high-resolution wide-field-of-view NUV-Optical-IR imager; and a UV spectro-polarimeter being contributed by Centre National d'Etudes Spatiales (CNES). A fifth instrument, a multi-resolution optical-NIR spectrograph, is planned as part of a second architecture to be studied in late 2017.

Supersonic Retropropulsion Flight Test Concepts

Science.gov (United States)

Post, Ethan A.; Dupzyk, Ian C.; Korzun, Ashley M.; Dyakonov, Artem A.; Tanimoto, Rebekah L.; Edquist, Karl T.

2011-01-01

NASA's Exploration Technology Development and Demonstration Program has proposed plans for a series of three sub-scale flight tests at Earth for supersonic retropropulsion, a candidate decelerator technology for future, high-mass Mars missions. The first flight test in this series is intended to be a proof-of-concept test, demonstrating successful initiation and operation of supersonic retropropulsion at conditions that replicate the relevant physics of the aerodynamic-propulsive interactions expected in flight. Five sub-scale flight test article concepts, each designed for launch on sounding rockets, have been developed in consideration of this proof-of-concept flight test. Commercial, off-the-shelf components are utilized as much as possible in each concept. The design merits of the concepts are compared along with their predicted performance for a baseline trajectory. The results of a packaging study and performance-based trade studies indicate that a sounding rocket is a viable launch platform for this proof-of-concept test of supersonic retropropulsion.

The analysis of normative requirements to materials of VVER components, basing on LBB concepts

Energy Technology Data Exchange (ETDEWEB)

Anikovsky, V.V.; Karzov, G.P.; Timofeev, B.T. [CRISM Prometey, St. Petersburg (Russian Federation)

1997-04-01

The paper demonstrates an insufficiency of some requirements native Norms (when comparing them with the foreign requirements for the consideration of calculating situations): (1) leak before break (LBB); (2) short cracks; (3) preliminary loading (warm prestressing). In particular, the paper presents (1) Comparison of native and foreign normative requirements (PNAE G-7-002-86, Code ASME, BS 1515, KTA) on permissible stress levels and specifically on the estimation of crack initiation and propagation; (2) comparison of RF and USA Norms of pressure vessel material acceptance and also data of pressure vessel hydrotests; (3) comparison of Norms on the presence of defects (RF and USA) in NPP vessels, developments of defect schematization rules; foundation of a calculated defect (semi-axis correlation a/b) for pressure vessel and piping components: (4) sequence of defect estimation (growth of initial defects and critical crack sizes) proceeding from the concept LBB; (5) analysis of crack initiation and propagation conditions according to the acting Norms (including crack jumps); (6) necessity to correct estimation methods of ultimate states of brittle an ductile fracture and elastic-plastic region as applied to calculating situation: (a) LBB and (b) short cracks; (7) necessity to correct estimation methods of ultimate states with the consideration of static and cyclic loading (warm prestressing effect) of pressure vessel; estimation of the effect stability; (8) proposals on PNAE G-7-002-86 Norm corrections.

The artifacts of component-based development

International Nuclear Information System (INIS)

Rizwan, M.; Qureshi, J.; Hayat, S.A.

2007-01-01

Component based development idea was floated in a conference name Mass Produced Software Components in 1968 (1). Since then engineering and scientific libraries are developed to reuse the previously developed functions. This concept is now widely used in SW development as component based development (CBD). Component-based software engineering (CBSE) is used to develop/ assemble software from existing components (2). Software developed using components is called component where (3). This paper presents different architectures of CBD such as Active X, common object request broker architecture (CORBA), remote method invocation (RMI) and simple object access protocol (SOAP). The overall objective of this paper is to support the practice of CBD by comparing its advantages and disadvantages. This paper also evaluates object oriented process model to adapt it for CBD. (author)

Nanotechnology Concepts at Marshall Space Flight Center: Engineering Directorate

Science.gov (United States)

Bhat, B.; Kaul, R.; Shah, S.; Smithers, G.; Watson, M. D.

2001-01-01

Nanotechnology is the art and science of building materials and devices at the ultimate level of finesse: atom by atom. Our nation's space program has need for miniaturization of components, minimization of weight, and maximization of performance, and nanotechnology will help us get there. Marshall Space Flight Center's (MSFC's) Engineering Directorate is committed to developing nanotechnology that will enable MSFC missions in space transportation, space science, and space optics manufacturing. MSFC has a dedicated group of technologists who are currently developing high-payoff nanotechnology concepts. This poster presentation will outline some of the concepts being developed including, nanophase structural materials, carbon nanotube reinforced metal and polymer matrix composites, nanotube temperature sensors, and aerogels. The poster will outline these concepts and discuss associated technical challenges in turning these concepts into real components and systems.

Stand-alone photovoltaic system: study of a modular concept with distributed communication and control units; Systeme photovoltaique autonome: etude d'une structure modulaire a gestion repartie

Energy Technology Data Exchange (ETDEWEB)

Neusser, A

2004-09-15

This thesis concerns an innovative photovoltaic system concept, which is modular am where the standardisation of all of the components is possible. Lead-acid batteries tare used to store the energy. The main objective of this project is the improvement of the battery management process in the system. As the batteries are the weak point of the system, a new battery charger is developed aiming at a longer life-span and a homogeneous ageing rate for all of them. This charger permits energy exchanges, which are co-ordinated by a communication system. We use a DC/DC converter as power electronics for battery charging. PSpice simulations and tests verify its performance. Simulations with Matlab Simulink show the auto-equalization tendency of the chosen battery management method. In addition, an experimentation under real conditions validates the beneficial effect on the state of health of the batteries. (author)

Experimental study of the hydrodynamic instabilities occurring in boiling-water reactors; Etude experimentale des instabilites hydrodynamiques survenant dans les reacteurs nucleaires a ebullition

Energy Technology Data Exchange (ETDEWEB)

Fabreca, S. [Commissariat a l' Energie Atomique, Grenoble (France). Centre d' Etudes Nucleaires

1964-10-01

The subjects is an experimental out-of pile loop study of the hydrodynamic oscillations occurring in boiling-water reactors. The study was carried out at atmospheric pressure and at pressure of about 8 atmospheres, in channels heated electrically by a constant and uniform specified current. In the test at 8 atmospheres the channel was a round tube of approximately 6 mm interior diameter. At 1 atmosphere a ring-section channel was used, 10 * 20 mm in diameter, with an inner heating tube and an outer tube of pyrex. It was possible to operate with natural convection and also with forced convection with test-channel by-pass. The study consists of 3 parts: 1. Preliminary determination of the laws governing pressure-drop during boiling. 2. Determination of the fronts at which oscillation appears, within a wide range of the parameters involved. 3. A descriptive study of the oscillations and measurement of the periods. The report gives the oscillation fronts with natural and forced convection for various values of the singular pressure drop at the channel inlet and for various riser lengths. The results are presented in non-dimensional form, which is available, in first approximation, for all geometric scales and for all fluids. Besides the following points were observed: - the wall (nature and thickness) can be an important factor ; - oscillation can occur in a horizontal channel. (author) [French] II a ete effectue une etude experimentale, en boucle hors-pile, des oscillations hydrodynamiques survenant dans les reacteurs a ebullition. L'etude a ete effectuee a la pression atmospherique et a une pression voisine de 8 atmospheres dans des canaux chauffes electriquement a puissance imposee constante et uniforme. Dans les essais a 8 atmospheres le canal etait un tube circulaire de diametre interieur 6 mm environ. A 1 atmosphere le canal etait de section annulaire 10 * 20 mm avec un tube interieur chauffant et un tube exterieur en pyrex. Le fonctionnement etait possible

Development of a metal-clad advanced composite shear web design concept

Science.gov (United States)

Laakso, J. H.

1974-01-01

An advanced composite web concept was developed for potential application to the Space Shuttle Orbiter main engine thrust structure. The program consisted of design synthesis, analysis, detail design, element testing, and large scale component testing. A concept was sought that offered significant weight saving by the use of Boron/Epoxy (B/E) reinforced titanium plate structure. The desired concept was one that was practical and that utilized metal to efficiently improve structural reliability. The resulting development of a unique titanium-clad B/E shear web design concept is described. Three large scale components were fabricated and tested to demonstrate the performance of the concept: a titanium-clad plus or minus 45 deg B/E web laminate stiffened with vertical B/E reinforced aluminum stiffeners.

Measurements for stresses in machine components

CERN Document Server

Yakovlev, V F

1964-01-01

Measurements for Stresses in Machine Components focuses on the state of stress and strain of components and members, which determines the service life and strength of machines and structures. This book is divided into four chapters. Chapter I describes the physical basis of several methods of measuring strains, which includes strain gauges, photoelasticity, X-ray diffraction, brittle coatings, and dividing grids. The basic concepts of the electric strain gauge method for measuring stresses inside machine components are covered in Chapter II. Chapter III elaborates on the results of experim

Study of some properties of zirconium phosphate; Etude de quelques proprietes du phosphate de zirconium

Energy Technology Data Exchange (ETDEWEB)

Prospert, J [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

1963-05-01

Zirconium phosphate has been studied with a view to using it as an ion exchanger: the first objective was to develop a method of preparation easy to apply and also reproducible. To this end, several tests were carried out varying the molar ratios of phosphorus and of zirconium. Some physical properties such as the diffraction of X-rays were examined. The work then involved certain chemical properties, particularly the percentages of free water and structural water given by the loss on calcination, the Karl-Fisher method and the weight losses by thermogravimetry. Finally an attempts was made to apply the exchanger to the separation of alkaline ions. The static tests showed that the order of fixation of these ions was Cs{sup +} > Rb{sup +} >> K{sup +} > Na{sup +}. Tests with columns showed that Na{sup +} and K{sup +} were easily separable, as was the Rb{sup +}-Cs{sup +} mixture, this last pair being fairly difficult to dissociate. (author) [French] Le phosphate de zirconium a ete etudie en vue de son utilisation comme echangeur d'ions: le premier but a atteindre a ete de mettre au point une preparation pouvant se reveler facilement utilisable ainsi qu'aisement reproductible. A cet effet, plusieurs essais ont ete effectues en faisant varier les rapports molaires du phosphore et du zirconium. Quelques proprietes physiques, telle la diffraction des rayons X, ont ete abordees. Ensuite, l'etude a porte sur certaines proprietes chimiques, particulierement les pourcentages d'eau libre et d'eau de structure par des pertes au feu, utilisation de la methode de Karl-Fisher, ainsi que des pertes de poids a la thenmobalance. Enfin, on a tente d'utiliser l'echangeur a la separation des ions alcalins. Les etudes statiques ont permis de constater que l'ordre de fixation de ces ions etait Cs{sup +} > Rb{sup +} >> K{sup +} > Na{sup +}. Les essais effectues en colonne ont montre que Na{sup +} et K{sup +} etaient aisement separables entre eux, ainsi que du couple Rb{sup +}-Cs{sup +}, ce

Dying with dignity: a concept analysis.

Science.gov (United States)

Hemati, Zeinab; Ashouri, Elaheh; AllahBakhshian, Maryam; Pourfarzad, Zahra; Shirani, Farimah; Safazadeh, Shima; Ziyaei, Marziyeh; Varzeshnejad, Maryam; Hashemi, Maryam; Taleghani, Fariba

2016-05-01

This article is a report of an analysis of the concept of dying with dignity. Dignity is an important component of providing care for dying patients and their families. Nevertheless, given that this concept is poorly defined, concept analysis is one of the best ways to define and clarify the concept of death with dignity with the aim to enhance its application in clinical practice, research and education. A search of multiple nursing and social sciences databases was undertaken, including Academic Search Complete, Science Direct, ProQuest, Scopus, Medline, PubMed, EBSCO, Ovid, Noormage, Cinahl, Magiran, PsycINFO and SID. After an extensive review of the literature from 1998-2014, about 14 related articles were included in the study. Based on these articles, the applications, attributes and experimental results of and references to death with dignity were recorded. Based on this analysis, the most important attributes of this concept included respect for privacy, respect, spiritual peace and hope. The antecedents of this concept included consideration of moral values during caregiving, preservation of human dignity as a patient right and professional ethics, and belief in the dignity of self and others, consideration of culture in providing end-of-life care. The consequences of this concept included a sense of peace in the patient and their family, peaceful death and provision of patient privacy and comfort. The concept of patient dignity has been referred to in many contexts. However, considering the dignity of dying patients commensurate with their culture is the most important component of care provided by nurses to facilitate a peaceful death. Respecting the dignity of the patient results in the reduction of her/his suffering and prepares her/him for a comfortable death. © 2016 John Wiley & Sons Ltd.

System based practice: a concept analysis

Directory of Open Access Journals (Sweden)

SHAHRAM YAZDANI

2016-04-01

Full Text Available Introduction: Systems-Based Practice (SBP is one of the six competencies introduced by the ACGME for physicians to provide high quality of care and also the most challenging of them in performance, training, and evaluation of medical students. This concept analysis clarifies the concept of SBP by identifying its components to make it possible to differentiate it from other similar concepts. For proper training of SBP and to ensure these competencies in physicians, it is necessary to have an operational definition, and SBP’s components must be precisely defined in order to provide valid and reliable assessment tools. Methods: Walker & Avant’s approach to concept analysis was performed in eight stages: choosing a concept, determining the purpose of analysis, identifying all uses of the concept, defining attributes, identifying a model case, identifying borderline, related, and contrary cases, identifying antecedents and consequences, and defining empirical referents. Results: Based on the analysis undertaken, the attributes of SBP includes knowledge of the system, balanced decision between patients’ need and system goals, effective role playing in interprofessional health care team, system level of health advocacy, and acting for system improvement. System thinking and a functional system are antecedents and system goals are consequences. A case model, as well as border, and contrary cases of SBP, has been introduced. Conclusion: The identification of SBP attributes in this study contributes to the body of knowledge in SBP and reduces the ambiguity of this concept to make it possible for applying it in training of different medical specialties. Also, it would be possible to develop and use more precise tools to evaluate SBP competency by using empirical referents of the analysis.

Experimental study of the radio-active contamination of certain cultivated plants by irrigation water; Etude experimentale de la contamination radioactive par l'eau d'irrigation de certaines plantes cultivees

Energy Technology Data Exchange (ETDEWEB)

Michon, G [Commissariat a l' Energie Atomique, Fontenay-aux-Roses (France). Centre d' Etudes Nucleaires; Barbier, G; Le Blaye, P; Brossard, M [Station Centrale d' Agronomie, 78 - Versailles (France); Fioramonti, S; Marty, J R [Station Agronomique de Toulouse, 31 (France); Benard, P; Flanzy, M [Station Centrale de Technologie des Produits Vegetaux, 11 - Narbonne (France); Delas, J; Delmas, J; Demias, Ch [Station d' Agronomie de Bordeaux (Pont de la Maye), 33 (France); Huguet, C [Station Agronomique d' Avignon, 84 (France)

1964-07-01

This report follows on to the CEA reports no 1860 and 2159 and gives the results obtained during the years 1961 and 1962. These results confirm for the most part those obtained previously and deal also with a larger variety of vegetables. Vines and artificial prairies were also dealt with during the course of this work. The large dispersion of the limiting values of the coefficient r (the ratio between the amount of radio-elements in a kilogram of product harvested, to the amount of radio-elements present in a litre of irrigation water) with different types of soil, different plant types, etc... , makes it impossible to draw any general conclusions. Each case of rejection requires a special study of which the outlive is given. At all events it is to be expected that in the majority of cases these studies will lead to a decrease in the norms now in force. (authors) [French] Ce rapport fait suite aux rapports CEA no 1860 et 2159 et rapporte les resultats obtenus pendant les annees 1961 et 1962. Ces resultats confirment dans l'ensemble ceux precedemment obtenus tout en augmentant la variete des legumes etudies. La vigne et les prairies artificielles ont egalement fait l'objet d'etudes. La grande dispersion des valeurs limites du coefficient r (rapport entre la quantite de radioelements dans un kg de produits recoltes a la quantite de radioelements presente dans un litre d'eau d'irrigation) en rapport avec la nature des sols, le type vegetal, etc.., ne permet pas de degager de conclusions generales. Chaque cas de rejet necessite une etude particuliere dont le schema est donne. En tout etat de cause l'on doit s'attendre a ce que dans la plupart des cas ces etudes conduisent a une diminution des normes actuellement utilisees. (auteurs)

Development of out-of-core concepts for a supercritical-water, pressure-tube reactor

International Nuclear Information System (INIS)

Diamond, W.T.

2010-01-01

One of the Generation IV programs at Chalk River Laboratories has as its prime focus the development of out-of-core concepts for the SuperCritical Water (SCW) pressure tube reactor under development in Canada. A number of technical issues associated with the interface of out-of-core components and the pressure tubes of a SCW pressure tube reactor are being investigated. This article focuses on several aspects of out-of-core components and layouts, building upon concepts that have been developed during the past few years. The efforts are strongly focused on concepts for a fuel channel that can be fabricated with the tight lattice pitch (typically 230 to 250 mm) that may be required for some applications such as utilization of a thorium fuel cycle. It is not practical to adapt concepts with a tight lattice pitch while using the thicker materials required for the higher temperatures and pressures required for supercritical operation. A change in lattice pitch or configuration is required to accommodate the component size increases. This presentation will cover a number of new concepts developed to produce feeders and end fittings for the harsh conditions of a SCW pressure tube reactor. These components are then developed into conceptual models of a Gen IV pressure tube reactor mounted in both horizontal and vertical orientations. Full 3-D solid models of both concepts will be demonstrated as well as a 1/10th-scale model of one face of a horizontal concept that has been built from components made with a 3-D printer. (author)

Alternative Conceptions of Wisdom: An Onion-Peeling Exercise.

Science.gov (United States)

Blanchard-Fields, Fredda; And Others

1987-01-01

Discusses contextualistic and integrative approaches to the concept of wisdom, and the evolution of the concept from an independent construct of intelligence to a component of intelligence, i.e., practical intelligence. Suggests operationalization of wisdom as the ability to integrate cognition and affect. Illustrates the integrative approach with…

Clinical and symptomatological study of pigs subjected to a lethal dose of integral gamma irradiation; Etude clinique et symptomatologique chez le porc soumis a une irradiation gamma totale a dose letale

Energy Technology Data Exchange (ETDEWEB)

Vaiman, M; Guenet, J -L; Maas, J; Nizza, P

1966-05-01

Results are reported from a clinical and haematological study on a Corsican species of pigs wholly exposed to an approximately lethal dose of {gamma} radiation. The aim of this work was to examine the changes in the irradiation syndrome of irradiation for pigs to make it thus possible to devise further experiments, in particular in the therapeutic field. The dose received was 285 rads (measured as the absorption in the vertical antero-posterior medial plane). Data are presented on cyto-haematological changes in the blood circulating immediately after irradiation, and followed up to death, and changes in the medullary cytology after irradiation. The clinical picture of lethal radiation injury in swine is described. (authors) [French] Les auteurs rapportent les resultats d'une etude clinique et hematologique chez des porcs de race corse irradies in toto a dose sensiblement letale. Le but de cette etude etait de connaitre l'evolution du syndrome aigu d'irradiation chez le porc et de permettre ainsi le developpement d'experimentations ulterieures, en particulier dans le domaine therapeutique. La dose delivree etait de 285 rad (en dose absorbee au niveau du plan median vertical anteroposterieur. L'etude a porte essentiellement: 1. Sur les modifications cyclo-hematologiques du sang circulant immediatement apres l'irradiation, pour les differentes lignees cellulaires; l'evolution de ces modifications a ete notee jusqu'a la mort; 2. Sur les modifications de la cytologie medullaire apres irradiation (evolution du myelogramme et essai d'evaluation de la cellularite de la moelle osseuse);: 3. Sur les signes cliniques, d'ailleurs tres discrets, observes chez les porcs apres irradiation. (auteurs)

Clinical and symptomatological study of pigs subjected to a lethal dose of integral gamma irradiation; Etude clinique et symptomatologique chez le porc soumis a une irradiation gamma totale a dose letale

Energy Technology Data Exchange (ETDEWEB)

Vaiman, M.; Guenet, J.-L.; Maas, J.; Nizza, P

1966-05-01

Results are reported from a clinical and haematological study on a Corsican species of pigs wholly exposed to an approximately lethal dose of {gamma} radiation. The aim of this work was to examine the changes in the irradiation syndrome of irradiation for pigs to make it thus possible to devise further experiments, in particular in the therapeutic field. The dose received was 285 rads (measured as the absorption in the vertical antero-posterior medial plane). Data are presented on cyto-haematological changes in the blood circulating immediately after irradiation, and followed up to death, and changes in the medullary cytology after irradiation. The clinical picture of lethal radiation injury in swine is described. (authors) [French] Les auteurs rapportent les resultats d'une etude clinique et hematologique chez des porcs de race corse irradies in toto a dose sensiblement letale. Le but de cette etude etait de connaitre l'evolution du syndrome aigu d'irradiation chez le porc et de permettre ainsi le developpement d'experimentations ulterieures, en particulier dans le domaine therapeutique. La dose delivree etait de 285 rad (en dose absorbee au niveau du plan median vertical anteroposterieur. L'etude a porte essentiellement: 1. Sur les modifications cyclo-hematologiques du sang circulant immediatement apres l'irradiation, pour les differentes lignees cellulaires; l'evolution de ces modifications a ete notee jusqu'a la mort; 2. Sur les modifications de la cytologie medullaire apres irradiation (evolution du myelogramme et essai d'evaluation de la cellularite de la moelle osseuse);: 3. Sur les signes cliniques, d'ailleurs tres discrets, observes chez les porcs apres irradiation. (auteurs)

The concept of managerial accounting for business clothing industry

OpenAIRE

Luchko, М.

2010-01-01

The article discusses the problem of constructing the management accounting concept for business clothing industry taking into account factors of production decline in the current context. Concept of separate components is studies, which depend on the characteristics of clothing manufacture.

3D-printed fusion components concepts and validation for the UST-2 stellarator

International Nuclear Information System (INIS)

Queral, V.

2015-01-01

Highlights: • A fabrication method for fusion components is developed and validated. • Synergies obtained from additive manufacturing and non-metal casting. • 3D-printed polyamide hollow truss structure and casting of acrylic resin tested. • UST- 2 stellarator coil frame fabricated to validate the method performance. - Abstract: The geometric complexity and high accuracy simultaneously required in magnetic fusion devices, particularly stellarators and tokamaks, hampers the production of fusion components and devices. Rapid manufacturing construction methods, particularly enhanced for fusion, may contribute to a faster cycle and lower cost production of certain components for tokamaks and stellarators. Casting, cutting, forming, welding and mechanising are conventional production techniques for major fusion components, i.e. coil casings, coil frames, vacuum vessels and blankets. Synergies may emerge by combination of additive manufacturing (3D printing) with conventional manufacturing methods. 3D printing combined with resin moulding is tested by construction of the coil frame and the vacuum vessel of a small stellarator, UST-2. Satisfactory coil frames have been obtained by moulding acrylic resin in a special 3D printed polyamide hollow three-dimensional structure. The conceptual engineering design, construction process and validation of the components are described. The presented manufacturing method might contribute to advance the future 3D printing of larger metallic components for fusion.

3D-printed fusion components concepts and validation for the UST-2 stellarator

Energy Technology Data Exchange (ETDEWEB)

Queral, V., E-mail: vicentemanuel.queral@ciemat.es

2015-10-15

Highlights: • A fabrication method for fusion components is developed and validated. • Synergies obtained from additive manufacturing and non-metal casting. • 3D-printed polyamide hollow truss structure and casting of acrylic resin tested. • UST- 2 stellarator coil frame fabricated to validate the method performance. - Abstract: The geometric complexity and high accuracy simultaneously required in magnetic fusion devices, particularly stellarators and tokamaks, hampers the production of fusion components and devices. Rapid manufacturing construction methods, particularly enhanced for fusion, may contribute to a faster cycle and lower cost production of certain components for tokamaks and stellarators. Casting, cutting, forming, welding and mechanising are conventional production techniques for major fusion components, i.e. coil casings, coil frames, vacuum vessels and blankets. Synergies may emerge by combination of additive manufacturing (3D printing) with conventional manufacturing methods. 3D printing combined with resin moulding is tested by construction of the coil frame and the vacuum vessel of a small stellarator, UST-2. Satisfactory coil frames have been obtained by moulding acrylic resin in a special 3D printed polyamide hollow three-dimensional structure. The conceptual engineering design, construction process and validation of the components are described. The presented manufacturing method might contribute to advance the future 3D printing of larger metallic components for fusion.

A crystallographic and spectroscopic study of crystal sites in the 'spinel' structure; Etude cristallographique et spectroscopique des sites cristallins dans la structure 'spinelle'

Energy Technology Data Exchange (ETDEWEB)

Drifford, M. [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

1967-06-15

A crystallographic study on magnesium aluminates led to the determination of crystal site average distortion. A spectroscopic study of transition elements doped spinels gave the position of the doping element in tetrahedral (A) or octahedral (B) sites, and the local distortion of the latter. The comparison of average and local parameters points to differences in the behaviour of doping elements and shows the size of (A) sites are independent of the host crystal composition while the average size of (B) sites varies with the composition. (author) [French] Une etude cristallographique des aluminates de magnesium a permis de determiner la deformation moyenne des sites cristallins. Une etude spectroscopique des aluminates de magnesium dopes avec des elements de transition a permis de localiser les dopants entre les sites tetraedriques (A) et octaedriques (B) et d'etudier la deformation locale de ces sites. La comparaison entre les parametres moyens et locaux a caracterise le comportement du dopant et montre que les dimensions des sites (A) sont independantes de la composition de la matrice, alors que les caracteristiques geometriques moyennes des sites (B) varient continument avec la composition. (auteur)

A concept of a component based system to determine pot-plant shelf-life

DEFF Research Database (Denmark)

Körner, Oliver; Skou, Anne-Marie Thonning; Aaslyng, Jesper Peter Mazanti

2006-01-01

to calculate the expected keeping quality, or it will be able to apply the system as decision support during plant cultivation. In the latter case, the model-based system can be implemented in a greenhouse climate computer. The concept contains information on climate control strategies, controlled stress......, the keeping quality of a plant after removal from the greenhouse could be estimated. A concept of a system that describes a model based knowledge system aiming at determination of the last selling date for pot plants is presented. The core of the conceptual system is a tool that can either be used......, diseases, nutrient management and substrates....

Framatome ANP GmbH concept of Plant Life Management (PLIM)

International Nuclear Information System (INIS)

Daeuwel, W.; Biemann, W.; Danisch, R.; Kastner, B.; Meyer, W.; Nopper, H.; Waas, U.; Warnken, L.

2002-01-01

The deregulation of the power generation industry has resulted in increased competitive pressure and is forcing operators to improve plant operating economy while maintaining high levels of plant safety. A key factor to meeting this challenge is to apply a comprehensive plant life management (PLIM) approach which addresses all relevant ageing and degradation mechanisms regarding the safety concept, plant component structures and documentation, plant personnel, consumables, operations management system and administrative controls. For this reason, Framatome ANP GmbH has developed an integrated PLIM concept applicable for both new and operating plants and focusing on the safety concept, plant component structures and documentation. (orig.)

Development of Smart Sensors System Based on Formal Concept Analysis and Ontology Model

Directory of Open Access Journals (Sweden)

Hongsheng Xu

2013-06-01

Full Text Available The smart sensor is the product of the combination of one or more sensitive components, precision analog circuits, digital circuits, microprocessor, communication interface, intelligent software systems and hardware integration in a packaging component. Formal concept analysis is from the given data to automatically extract the classification relationship between the entire hidden concept and concept, formation of concept model. Ontology is a set of relations between concepts of the specific domain and concept, and it can effectively express the general knowledge of specific field. The paper proposes development of smart sensors system based on formal concept analysis and ontology model. Smart sensor is a micro processor, sensor with information detection, information processing, information memory, logical thinking and judging function. The methods can improve the effect of the smart sensors.

Magnetic study of solid uranium-fluorine complexes; Contribution a l'etude magnetique de composes fluores solides de l'uranium

Energy Technology Data Exchange (ETDEWEB)

Dianoux, A.J. [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

1969-06-01

A study of the magnetic susceptibility of uranium V fluorine complexes and of the magnetic resonance of fluorine atoms in uranium VI fluorine complexes has made it possible to put forward a structural model for these compounds for which it is impossible, because of the lack of suitable single crystals for X-ray diffraction work, to deduce the exact position of the fluorine atoms. It is shown that it is difficult to interpret the paramagnetism of uranium fluorides, because the uranium ions are in low-symmetry sites. A theoretical study of the magnetism of the U{sup V} ion in complex fluorides of the type M{sub 3}UF{sub 8} (M = NH{sub 4}, Na, Rb, Cs) leads to an interpretation based on a trigonal deformation of the eight fluorine atom structure surrounding the uranium atom. By applying a Hamiltonian spin formalism and making a systematic use of group theory, it is possible to present the susceptibility calculations very concisely. Study of the resonance and of the relaxation of the fluorine atoms in powdered uranium VI complex fluorides suggests a structural model in the case of NaUF{sub 7}. It is shown that the shape of the magnetic resonance absorption lines is strongly affected by the presence of large anisotropic chemical shifts. In the model proposed here, six fluorine atoms are linked to the uranium, atom by strongly covalent bonds in a deformed UF{sub 6} octahedral structure; the seventh fluorine atom remains ionic. The occurrence of a rotational movement of the octahedron is confirmed by a study of the longitudinal relaxation of the fluorine atoms, the activation energy being 0.46 eV. (author) [French] L'etude de la susceptibilite magnetique de complexes fluores d'uranium V et la resonance magnetique des fluors dans des complexes fluores d'uranium VI permettent de proposer un modele structural pour ces composes, ou la diffraction des rayons X, en l'absence de monocristaux convenables, est incapable de preciser la position des atomes de

RCC-M - Design and Conception Rules for Mechanical Components of PWR Nuclear Islands

International Nuclear Information System (INIS)

2007-01-01

The design and construction rules applicable to mechanical components of PWR Nuclear Islands (RCC-M) are a part of the collection of design and construction rules for nuclear power plants. It covers the rules applicable to the design and manufacture of pressure boundaries of mechanical equipment of pressurized water reactors (PWR). The pressure components subject to the RCC-M are specified in A 4000. They include the reactor fluid systems (primary, secondary and auxiliary systems) and other components which are not subject to pressure: vessel internals, supports for pressure components subject to the RCC-M, nuclear island storage tanks. When a pressure equipment is subject to the RCC-M, all its elements subject to pressure are also, in accordance with the provisions of A 4000, and these elements are the same class as the component. In this case all the provisions of the RCC-M are applicable: design, procurement, manufacture, inspection and pressure testing. Elements which are not subject to pressure and which are subject to the RCC-M may be covered within the Code by limited specific provisions (procurement of materials for example). The other rules applicable to this equipment must be in contractual form. The assemblies comprising pressure equipment assembled by a manufacturer to constitute an integrated and functional whole, shall be subject to the rules indicated in this Code. Main objectives of Code Requirements are to ensure the integrity and mechanical stability over the equipment design life. Function ability and operability of equipment are not directly addressed in the Code. The RCC-M contributes to ensuring compliance with regulatory requirements. These requirements depend on the applicable regulatory context. The RCC-M is representative of the state of the art as concerns the design and manufacture of PWR components, ensuring an overall safety level tested through experience. The RCC-M consists of five sections, which provide rules for the design and

Stand-alone photovoltaic system: study of a modular concept with distributed communication and control units; Systeme photovoltaique autonome: etude d'une structure modulaire a gestion repartie

Energy Technology Data Exchange (ETDEWEB)

Neusser, A.

2004-09-15

This thesis concerns an innovative photovoltaic system concept, which is modular am where the standardisation of all of the components is possible. Lead-acid batteries tare used to store the energy. The main objective of this project is the improvement of the battery management process in the system. As the batteries are the weak point of the system, a new battery charger is developed aiming at a longer life-span and a homogeneous ageing rate for all of them. This charger permits energy exchanges, which are co-ordinated by a communication system. We use a DC/DC converter as power electronics for battery charging. PSpice simulations and tests verify its performance. Simulations with Matlab Simulink show the auto-equalization tendency of the chosen battery management method. In addition, an experimentation under real conditions validates the beneficial effect on the state of health of the batteries. (author)

Probes and their application to the study of H.F. plasmoids; Les sondes et leur application dans l'etude des plasmoides H.F

Energy Technology Data Exchange (ETDEWEB)

Brunet, A; Geller, R [Commissariat a l' Energie Atomique, Saclay (France).Centre d' Etudes Nucleaires

1960-07-01

In the first part of this paper, we study the single Langmuir probe and the double-probe method. In the second part, we describe the probe-technique in connection with R.F. plasmoids. (author) [French] Dans la premiere partie de cet article, nous rappelons les principes d'utilisation de la sonde simple de Langmuir ainsi que la methode de la sonde double. La seconde partie est consacree a la pratique des sondes dans l'etude des plasmoides H.F. (auteur)

Application of Component Technology to E-commerce System

Institute of Scientific and Technical Information of China (English)

ZHU Jianfeng

2004-01-01

At present E-commerce system tends to become more complex, and traditional system designing methods can not fufil the need of E-commerce system, thus requiring an effective methodas solution. With this concern, this paper introduces some concepts of component technology, then brings forward the new connotation and basic features of component technology through the analysis of its technological character. This paper finally discusses the application of component technology to E-commerce system.

Transportation System Concept of Operations

Energy Technology Data Exchange (ETDEWEB)

N. Slater-Thompson

2006-08-16

The Nuclear Waste Policy Act of 1982 (NWPA), as amended, authorized the DOE to develop and manage a Federal system for the disposal of SNF and HLW. OCRWM was created to manage acceptance and disposal of SNF and HLW in a manner that protects public health, safety, and the environment; enhances national and energy security; and merits public confidence. This responsibility includes managing the transportation of SNF and HLW from origin sites to the Repository for disposal. The Transportation System Concept of Operations is the core high-level OCRWM document written to describe the Transportation System integrated design and present the vision, mission, and goals for Transportation System operations. By defining the functions, processes, and critical interfaces of this system early in the system development phase, programmatic risks are minimized, system costs are contained, and system operations are better managed, safer, and more secure. This document also facilitates discussions and understanding among parties responsible for the design, development, and operation of the Transportation System. Such understanding is important for the timely development of system requirements and identification of system interfaces. Information provided in the Transportation System Concept of Operations includes: the functions and key components of the Transportation System; system component interactions; flows of information within the system; the general operating sequences; and the internal and external factors affecting transportation operations. The Transportation System Concept of Operations reflects OCRWM's overall waste management system policies and mission objectives, and as such provides a description of the preferred state of system operation. The description of general Transportation System operating functions in the Transportation System Concept of Operations is the first step in the OCRWM systems engineering process, establishing the starting point for the lower

Social Accountable Medical Education: A concept analysis.

Science.gov (United States)

Abdolmaleki, Mohammadreza; Yazdani, Shahram; Momeni, Sedigheh; Momtazmanesh, Nader

2017-07-01

Considering the pervasiveness of social accountable medical education concept around the world and the growing trend of literature in this regard as well as various interpretations made about this concept, we found it necessary to analyze the concept of social accountable medical education. In this study, the modified version of McKenna's approach to concept analysis was used to determine the concept, explain structures and substructures and determine the border concepts neighboring and against social accountability in medical education. By studying the selected sources,the components of the concept were obtained to identify it and express an analytic definition of social accountability in medical education system. Then, a model case with all attributes of the given concept and the contrary and related concepts were mentioned to determine the boundary between the main concept and auxiliary ones. According to the results of this study in the field of social accountability, the detailed and transparent analytical definition of social accountable medical education can be used in future studies as well as the function and evaluation of medical education system.

A LEGO paradigm for virtual accelerator concept

International Nuclear Information System (INIS)

Andrianov, S.; Ivanov, A.; Podzyvalov, E.

2012-01-01

The paper considers basic features of a Virtual Accelerator concept based on LEGO paradigm. This concept involves three types of components: different mathematical models for accelerator design problems, integrated beam simulation packages (i. e. COSY, MAD, OptiM and others), and a special class of virtual feedback instruments similar to real control systems (EPICS). All of these components should inter-operate for more complete analysis of control systems and increased fault tolerance. The Virtual Accelerator is an information and computing environment which provides a framework for analysis based on these components that can be combined in different ways. Corresponding distributed computing services establish interaction between mathematical models and low level control system. The general idea of the software implementation is based on the Service-Oriented Architecture (SOA) that allows using cloud computing technology and enables remote access to the information and computing resources. The Virtual Accelerator allows a designer to combine powerful instruments for modeling beam dynamics in a friendly way including both self-developed and well-known packages. In the scope of this concept the following is also proposed: the control system identification, analysis and result verification, visualization as well as virtual feedback for beam line operation. The architecture of the Virtual Accelerator system itself and results of beam dynamics studies are presented. (authors)

Contribution to the study on the flow rate adjustment for gas cooled power reactors (1964); Contributiom a l'etude de reglage du debit pour les reacteurs industriels refroidis par gaz (1964)

Energy Technology Data Exchange (ETDEWEB)

Milliot, B. [Commissariat a l' Energie Atomique, Fontenay-aux-Roses (France). Centre d' Etudes Nucleaires

1961-06-15

1. This original study firstly defines the problem of the adjustment of the coolant flow rate in a reactor channel as a function of the corresponding heat transfer equations and of the local and temporal neutron flux. The necessity of such an adjustment is pointed out and the modifying parameters are studied. An adjustment study using the envelope of the possible flux curves is developed. A short study on the technology and the economical advantage of this adjustment is presented. Some measurements, made on G-1 and G-2, show the precision one can obtain from adjustment apparatus itself as well as from the complete reactor adjustment system. 2. Evolution of nuclear properties of fuel in an heterogeneous thermal reactor. In the first port of this paper, the phenomena of fuel evolution have been mainly pointed out. Now a bibliographical study more qualitatively than quantitatively has been done. This survey specifies the present theories and relates to a real effective cross section and also yields to the bases of such a nuclear calculation. (author) [French] 1. Cette etude originale definit d'abord le probleme du reglage du debit de refrigerant dans un canal de reacteur en fonction de la formulation du calcul des performances thermodynamiques de ce canal et des variations du flux neutronique dans l'espace et le temps. La necessite du reglage est ensuite mise en evidence et les parametres le modifiant sont etudies. Une methode de reglage, basee sur l'emploi d 'une courbe enveloppe des courbes de flux possibles, est donnee. Une breve etude de la technologie et des incidences economiques du reglage est presentee. Des mesures effectuees sur les reacteurs G-1 et G-2 montrent la precision que l'on peut attendre des dispositifs de reglage comme du reglage d'ensemble du reacteur lui-meme. 2. Evolution des proprietes nucleaires du combustible dans un reacteur heterogene a neutrons thermiques. Les phenomenes d'evolution du combustible

Design of Concept Libraries for C++

KAUST Repository

Sutton, Andrew

2012-01-01

We present a set of concepts (requirements on template arguments) for a large subset of the ISO C++ standard library. The goal of our work is twofold: to identify a minimal and useful set of concepts required to constrain the library\\'s generic algorithms and data structures and to gain insights into how best to support such concepts within C++. We start with the design of concepts rather than the design of supporting language features; the language design must be made to fit the concepts, rather than the other way around. A direct result of the experiment is the realization that to simply and elegantly support generic programming we need two kinds of abstractions: constraints are predicates on static properties of a type, and concepts are abstract specifications of an algorithm\\'s syntactic and semantic requirements. Constraints are necessary building blocks of concepts. Semantic properties are represented as axioms. We summarize our approach: concepts = constraints + axioms. This insight is leveraged to develop a library containing only 14 concepts that encompassing the functional, iterator, and algorithm components of the C++ Standard Library (the STL). The concepts are implemented as constraint classes and evaluated using Clang\\'s and GCC\\'s Standard Library test suites. © 2012 Springer-Verlag.

NSSS Component Control System Design of Integral Reactor

International Nuclear Information System (INIS)

Lee, Joon Koo; Kwon, Ho Je; Jeong, Kwong Il; Park, Heui Youn; Koo, In Soo

2005-01-01

MMIS(Man Machine Interface System) of an integral reactor is composed of a Control Room, Plant Protection System, Control System and Monitoring System which are related with the overall plant operation. MMIS is being developed with a new design concept and digital technology to reduce the Human Factor Error and improve the systems' safety, reliability and availability. And CCS(component control system) is also being developed with a new design concept and digital hardware technology A fully digitalized system and design concept are introduced in the NSSS CCS

FANP concept for plant life management and recent experience

International Nuclear Information System (INIS)

Nopper, H.; Daeuwel, W.; Waas, U.

2002-01-01

The deregulation of the power generation industry has resulted in increased competitive pressure and is forcing operators to improve plant operating economy while maintaining high levels of plant safety. A key factor to meet this challenge is to apply a comprehensive plant life management (PLIM) approach. The PLIM strategy addresses all relevant ageing and degradation mechanisms, the safety concept and the plant component documentation. In addition, it affects the management of plant personnel, consumables, operations management systems and administrative control procedures. Framatome ANP GmbH has developed an integrated PLIM concept and associated software tools applicable for both new and operating plants. The concept includes procedures and strategies regarding mechanical, electrical and I and C components as well as civil structures. The majority of e.g. mechanical components in a well-kept power plant will experience a technical service life, which is far above the intended design life. In most cases, only a small percentage of mechanical components is subject to significant degradation which may effect the integrity or the function of the component. The intention of an effective PLIM concept is to select safety and availability relevant components, were relevant degradation can not be ruled out. The PLIM concept utilizes a combination of strategies to identify components in a power plant: which are relevant to life management. An integrated safety review identifies components essential to safety, providing a classification of the associated safety levels. Assessment concerning the availability relevance of components is conduced. Components identified to be important to safety and availability are subject to a screening process for further grouping with respect to degradation potential. The selection process provides reasonable prioritisation of ageing relevant components and ensures that efforts are devoted to elements, where ageing is a relevant concern

Using a Concept Inventory to Assess the Reasoning Component of Citizen-Level Science Literacy: Results from a 17,000-Student Study.

Science.gov (United States)

Nuhfer, Edward B; Cogan, Christopher B; Kloock, Carl; Wood, Gregory G; Goodman, Anya; Delgado, Natalie Zayas; Wheeler, Christopher W

2016-03-01

After articulating 12 concepts for the reasoning component of citizen-level science literacy and restating these as assessable student learning outcomes (SLOs), we developed a valid and reliable assessment instrument for addressing the outcomes with a brief 25-item science literacy concept inventory (SLCI). In this paper, we report the results that we obtained from assessing the citizen-level science literacy of 17,382 undergraduate students, 149 graduate students, and 181 professors. We address only findings at or above the 99.9% confidence level. We found that general education (GE) science courses do not significantly advance understanding of science as a way of knowing. However, the understanding of science's way of knowing does increase through academic ranks, indicating that the extended overall academic experience better accounts for increasing such thinking capacity than do science courses alone. Higher mean institutional SLCI scores correlate closely with increased institutional selectivity, as measured by the institutions' higher mean SAT and ACT scores. Socioeconomic factors of a) first-generation student, b) English as a native language, and c) interest in commitment to a science major are unequally distributed across ethnic groups. These factors proved powerful in accounting for the variations in SLCI scores across ethnicities and genders.

Using a Concept Inventory to Assess the Reasoning Component of Citizen-Level Science Literacy: Results from a 17,000-Student Study

Directory of Open Access Journals (Sweden)

Edward B. Nuhfer

2015-12-01

Full Text Available After articulating 12 concepts for the reasoning component of citizen-level science literacy and restating these as assessable student learning outcomes (SLOs, we developed a valid and reliable assessment instrument for addressing the outcomes with a brief 25-item science literacy concept inventory (SLCI. In this paper, we report the results that we obtained from assessing the citizen-level science literacy of 17,382 undergraduate students, 149 graduate students, and 181 professors. We address only findings at or above the 99.9% confidence level. We found that general education (GE science courses do not significantly advance understanding of science as a way of knowing. However, the understanding of science’s way of knowing does increase through academic ranks, indicating that the extended overall academic experience better accounts for increasing such thinking capacity than do science courses alone. Higher mean institutional SLCI scores correlate closely with increased institutional selectivity, as measured by the institutions’ higher mean SAT and ACT scores. Socioeconomic factors of a first-generation student, b English as a native language, and c interest in commitment to a science major are unequally distributed across ethnic groups. These factors proved powerful in accounting for the variations in SLCI scores across ethnicities and genders.

Using a Concept Inventory to Assess the Reasoning Component of Citizen-Level Science Literacy: Results from a 17,000-Student Study†

Science.gov (United States)

Nuhfer, Edward B.; Cogan, Christopher B.; Kloock, Carl; Wood, Gregory G.; Goodman, Anya; Delgado, Natalie Zayas; Wheeler, Christopher W.

2016-01-01

After articulating 12 concepts for the reasoning component of citizen-level science literacy and restating these as assessable student learning outcomes (SLOs), we developed a valid and reliable assessment instrument for addressing the outcomes with a brief 25-item science literacy concept inventory (SLCI). In this paper, we report the results that we obtained from assessing the citizen-level science literacy of 17,382 undergraduate students, 149 graduate students, and 181 professors. We address only findings at or above the 99.9% confidence level. We found that general education (GE) science courses do not significantly advance understanding of science as a way of knowing. However, the understanding of science’s way of knowing does increase through academic ranks, indicating that the extended overall academic experience better accounts for increasing such thinking capacity than do science courses alone. Higher mean institutional SLCI scores correlate closely with increased institutional selectivity, as measured by the institutions’ higher mean SAT and ACT scores. Socioeconomic factors of a) first-generation student, b) English as a native language, and c) interest in commitment to a science major are unequally distributed across ethnic groups. These factors proved powerful in accounting for the variations in SLCI scores across ethnicities and genders. PMID:27047612

Experimental study of the radio-active contamination of certain cultivated plants by irrigation water; Etude experimentale de la contamination radioactive par l'eau d'irrigation de certaines plantes cultivees

Energy Technology Data Exchange (ETDEWEB)

Michon, G. [Commissariat a l' Energie Atomique, Fontenay-aux-Roses (France). Centre d' Etudes Nucleaires; Barbier, G.; Le Blaye, P.; Brossard, M. [Station Centrale d' Agronomie, 78 - Versailles (France); Fioramonti, S.; Marty, J.R. [Station Agronomique de Toulouse, 31 (France); Benard, P.; Flanzy, M. [Station Centrale de Technologie des Produits Vegetaux, 11 - Narbonne (France); Delas, J.; Delmas, J.; Demias, Ch. [Station d' Agronomie de Bordeaux (Pont de la Maye), 33 (France); Huguet, C. [Station Agronomique d' Avignon, 84 (France)

1964-07-01

This report follows on to the CEA reports no 1860 and 2159 and gives the results obtained during the years 1961 and 1962. These results confirm for the most part those obtained previously and deal also with a larger variety of vegetables. Vines and artificial prairies were also dealt with during the course of this work. The large dispersion of the limiting values of the coefficient r (the ratio between the amount of radio-elements in a kilogram of product harvested, to the amount of radio-elements present in a litre of irrigation water) with different types of soil, different plant types, etc... , makes it impossible to draw any general conclusions. Each case of rejection requires a special study of which the outlive is given. At all events it is to be expected that in the majority of cases these studies will lead to a decrease in the norms now in force. (authors) [French] Ce rapport fait suite aux rapports CEA no 1860 et 2159 et rapporte les resultats obtenus pendant les annees 1961 et 1962. Ces resultats confirment dans l'ensemble ceux precedemment obtenus tout en augmentant la variete des legumes etudies. La vigne et les prairies artificielles ont egalement fait l'objet d'etudes. La grande dispersion des valeurs limites du coefficient r (rapport entre la quantite de radioelements dans un kg de produits recoltes a la quantite de radioelements presente dans un litre d'eau d'irrigation) en rapport avec la nature des sols, le type vegetal, etc.., ne permet pas de degager de conclusions generales. Chaque cas de rejet necessite une etude particuliere dont le schema est donne. En tout etat de cause l'on doit s'attendre a ce que dans la plupart des cas ces etudes conduisent a une diminution des normes actuellement utilisees. (auteurs)

Studies of elements used in hertzian interferometry (millimetric waves). Measurement of the permittivity of a liquid dielectric; Etudes d'elements utilises en interferometrie hertzienne (ondes millimetriques). Mesure de la permittivite de dielectrique liquide

Energy Technology Data Exchange (ETDEWEB)

Dagai, M [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

1964-12-01

Study of some elements used in EHF interferometry (bond of millimeter waves). This study is about design of the following elements: horns, horns associated with lens, power separators: -) Study of assemblies allowing measurements of complex dielectric constants of liquids. These devices are used in free propagation about wave lengths {<=} 2 mm; -) Studied devices: Interferometer for 2 separated waves and Michelson's type interferometer; -) 4 liquids have been used: {epsilon}'{sub r} Octane from -50 to 70 C (-58 to 158 F), {epsilon}'{sub r} and {epsilon}'' [Monochlorobenzene at 22,8 C (73 F), Mixture of octane with 10,8 per cent citral at 22 C (72 F) and Benzene at 21 C (70 F)]. -) Precision obtained about measurements: {delta}{epsilon}'/{epsilon}' de 1 a 2%, {delta}{epsilon}''/{epsilon}'' de 4 a 6%.(author) [French] Etudes d'elements utilises en interferometrie hertzienne fonctionnant en ondes millimetriques. Cette etude porte sur la realisation des elements suivants: cornets, cornets associes aux lentilles, separateurs de puissance. Etudes des montages permettant les mesures de la constante dielectrique complexe des corps liquides. Ces montages fonctionnent en propagation libre, sur des longueurs d'onde inferieures ou egales a 2 millimetres. Les montages etudies sont: interferometre a deux ondes separees et interferometre du type Michelson. De plus 4 liquides ont ete etudies: {epsilon}'{sub r} octane de -50 a 70 C, {epsilon}'{sub r} et {epsilon}'' [monochlorobenzene a 22,8 C et melange octane avec 10,8 pour cent citral a 22 C, Benzene a 21 C]. Les precisions obtenues sur les mesures sont: {delta}{epsilon}'/{epsilon}' de 1 a 2 pour cent, {delta}{epsilon}''/{epsilon}'' de 4 a 6 pour cent.

Clinical Reasoning in Medicine: A Concept Analysis

Directory of Open Access Journals (Sweden)

Shahram Yazdani

2018-01-01

Full Text Available Background: Clinical reasoning plays an important role in the ability of physicians to make diagnoses and decisions. It is considered the physician’s most critical competence, but it is an ambiguous conceptin medicine that needs a clear analysis and definition. Our aim was to clarify the concept of clinical reasoning in medicine by identifying its components and to differentiate it from other similar concepts.It is necessary to have an operational definition of clinical reasoning, and its components must be precisely defined in order to design successful interventions and use it easily in future research.Methods: McKenna’s nine-step model was applied to facilitate the clarification of the concept of clinical reasoning. The literature for this concept analysis was retrieved from several databases, including Scopus, Elsevier, PubMed, ISI, ISC, Medline, and Google Scholar, for the years 1995– 2016 (until September 2016. An extensive search of the literature was conducted using the electronic database. Accordingly, 17 articles and one book were selected for the review. We applied McKenna’s method of concept analysis in studying clinical reasoning, so that definitional attributes, antecedents, and consequences of this concept were extracted.Results: Clinical reasoning has nine major attributes in medicine. These attributes include: (1 clinical reasoning as a cognitive process; (2 knowledge acquisition and application of different types of knowledge; (3 thinking as a part of the clinical reasoning process; (4 patient inputs; (5 contextdependent and domain-specific processes; (6 iterative and complex processes; (7 multi-modal cognitive processes; (8 professional principles; and (9 health system mandates. These attributes are influenced by the antecedents of workplace context, practice frames of reference, practice models of the practitioner, and clinical skills. The consequences of clinical reasoning are the metacognitive improvement of

Conception and fabrication of a real time automatic correlator (multi-correlator); Etude et realisation d'un correlateur automatique (multicorrelateur) fonctionnant en temps reel

Energy Technology Data Exchange (ETDEWEB)

Berthier, D. [Commissariat a l' Energie Atomique, Grenoble (France). Centre d' Etudes Nucleaires

1967-10-01

The purpose of this work is to elaborate a specific computer able to display the real.time correlation function of two variables represented by two electrical signals. The various functions to be done are dealt with the best suited technology: delays from numerical method, hybrid multiplication, analog integration. This method proved very versatile so that it has been possible to modify the circuits with more performing components without changing the general conception of the whole system. In particular, the bandwidth, which was originally 125 kHz (1966) is now 1 MHz and will be 5 MHz, January 1968. Many results are obtained from the correlator such as: - determination of pulse responses of linear systems (1. and 2. order filters, oscillating circuits); - extraction of signals from noise; - measurement of time and space correlation in a turbulent plasma; - treatment of electro-biological signals. (author) [French] Nous nous sommes proposes de concevoir un calculateur specialise pour l'estimation en temps reel de la fonction de correlation de deux phenomenes representes par deux tensions electriques. Il a ete retenu les procedes de calcul s'adaptant le mieux aux diverses fonctions a realiser: retard par une technique numerique, multiplication hybride, integration analogique. Cette methode s'est revelee tres souple d'emploi: en effet les circuits ont pu etre modifies, sans changer la conception de l'appareil, au fur et a mesure de l'evolution des performances des composants electroniques. Ainsi la bande passante de l'appareil qui initialement etait de 125 KHz (1966) est actuellement de 1 MHz et sera 5 MHz en janvier 1968. De nombreux resultats ont ete obtenus avec l'appareil: - determination de reponses impulsionnelles de systemes lineaires (filtres 1er ordre, 2eme ordre, circuit oscillant, etc... ); - detection de signaux dans le bruit; - mesure de correlation spatiale et temporelle dans le plasma - traitement de signaux

Waste conditioning components for a new radwaste building

International Nuclear Information System (INIS)

Lewitz, J.C.; Stoelken, G.

2001-01-01

In the year 1999 Hansa Projekt Anlagentechnik GmbH made a basic study for the equipment of a new to be build radwaste building for TPC, Taiwan. Within an offer there was made an overall concept together with a proposal for system integration including supply, erection and put into operation for the following components supercompactor with in-/output device, overpack-filling station, resindrying- and filling unit, sorting tables for solid radwaste, cementation unit for liquid radwaste, cementation unit for grouting, drum inspection and decontamination station, storages for primary and conditioned radwaste, HVAC with filtration for several components and a roller conveyor system for transfer throughout the radwaste building. This overall concept was to be realized very similar by the client. The HPA scope of supply was focused onto the key components supercompactor with in-/output device, roller conveyor and turntable for cartridges and pellets, overpack-filling station, sorting tables, HVAC with filtration for supercompactor and sorting tables, and last but not least a drum inspection and decontamination system. In the following at first the functioning of HPA-components and the system as whole will be declared. At second components and system will be shown in detail together with figures and technical data. (orig.)

Principal Component Analysis In Radar Polarimetry

Directory of Open Access Journals (Sweden)

A. Danklmayer

2005-01-01

Full Text Available Second order moments of multivariate (often Gaussian joint probability density functions can be described by the covariance or normalised correlation matrices or by the Kennaugh matrix (Kronecker matrix. In Radar Polarimetry the application of the covariance matrix is known as target decomposition theory, which is a special application of the extremely versatile Principle Component Analysis (PCA. The basic idea of PCA is to convert a data set, consisting of correlated random variables into a new set of uncorrelated variables and order the new variables according to the value of their variances. It is important to stress that uncorrelatedness does not necessarily mean independent which is used in the much stronger concept of Independent Component Analysis (ICA. Both concepts agree for multivariate Gaussian distribution functions, representing the most random and least structured distribution. In this contribution, we propose a new approach in applying the concept of PCA to Radar Polarimetry. Therefore, new uncorrelated random variables will be introduced by means of linear transformations with well determined loading coefficients. This in turn, will allow the decomposition of the original random backscattering target variables into three point targets with new random uncorrelated variables whose variances agree with the eigenvalues of the covariance matrix. This allows a new interpretation of existing decomposition theorems.

A Novel Concept for Three-Phase Cascaded Multilevel Inverter Topologies

Directory of Open Access Journals (Sweden)

Md Mubashwar Hasan

2018-01-01

Full Text Available One of the key challenges in multilevel inverters (MLIs design is to reduce the number of components used in the implementation while maximising the number of output voltage levels. This paper proposes a new concept that facilitates a device count reduction technique of existing cascaded MLIs. Moreover, the proposed concept can be utilised to extend existing single phase cascaded MLI topologies to three-phase structure without tripling the number of semiconductor components and input dc-supplies as per the current practice. The new generalized concept involves two stages; namely, cascaded stage and phase generator stage. The phase generator stage is a combination of a conventional three-phase two level inverter and three bi-directional switches while the cascaded stage can employ any existing cascaded topology. A laboratory prototype model is built and extensive experimental analyses are conducted to validate the feasibility of the proposed cascaded MLI concept.

Social Accountable Medical Education: A concept analysis

Science.gov (United States)

ABDOLMALEKI, MOHAMMADREZA; YAZDANI, SHAHRAM; MOMENI, SEDIGHEH; MOMTAZMANESH, NADER

2017-01-01

Introduction: Considering the pervasiveness of social accountable medical education concept around the world and the growing trend of literature in this regard as well as various interpretations made about this concept, we found it necessary to analyze the concept of social accountable medical education. Methods: In this study, the modified version of McKenna’s approach to concept analysis was used to determine the concept, explain structures and substructures and determine the border concepts neighboring and against social accountability in medical education. Results: By studying the selected sources,the components of the concept were obtained to identify it and express an analytic definition of social accountability in medical education system. Then, a model case with all attributes of the given concept and the contrary and related concepts were mentioned to determine the boundary between the main concept and auxiliary ones. Conclusion: According to the results of this study in the field of social accountability, the detailed and transparent analytical definition of social accountable medical education can be used in future studies as well as the function and evaluation of medical education system. PMID:28761884

Determination of material behavior in 700 C turbine components under component and load specific conditions

Energy Technology Data Exchange (ETDEWEB)

Lueckemeyer, N.; Kirchner, H.; Kern, T.U. [Siemens AG, Muehlheim (Germany). Energy Sector; Reigl, M. [Alstom Power, Baden (Switzerland); Klenk, A.; Klein, T. [Stuttgart Univ. (Germany). MPA; Schwienheer, M.; Cui, L.; Scholz, A.; Berger, C. [Institut fuer Werkstoffkunde (IfW), Darmstadt (Germany)

2010-07-01

With global warming being one of mankind's greatest challenges, an increasing demand for electricity world-wide, and studies showing that fossil resources like coal and gas will remain a major source for electricity for the next couple of decades, research into the development of highest efficiency fossil power plants has become a top priority. Calculations for coal fired power plants have shown that CO{sub 2} emissions can be reduced by as much as 7% compared to the current state of the art equipment. It can be reached by increasing the live steam parameters to 700 C and 350bar. To achieve the desired operating hours at this temperature the application of nickel base materials is necessary for the main components such as rotors, inner casings and valves. Nowadays, the use of Nickel base alloys is common practice for selected gas turbine components. However, with steam turbine rotors being 1000mm in diameter and casings with wall thicknesses higher than 100mm the gas turbine application range and experience for nickel base alloys are well exceeded. This paper uses a basic design for a steam turbine to illustrate the core challenges in developing nickel based steam turbine components, such as casting, forging, nondestructive testing and welding. Suitable nickel based alloys have been investigated in research projects over the past years. The research results are summarized and an explanation is given as to why Alloy617 was selected for forged components and Alloy625 for cast components. This paper then focuses on the material behavior under long term and complex loading conditions and on the development of life time concepts for thick walled components made from these alloys. Due to the differences in the material behavior of nickel base alloys, the existing steel design philosophies cannot be completely adopted but rather must be carefully evaluated and modified where necessary. To do this, large test components were manufactured. Based on both standard tests

Development of an analogue multiplexed regulation for periodic 1. order delayed processes; Etude et realisation d'une regulation analogique multiplexee pour processus aperiodiques du 1. ordre avec retard pur

Energy Technology Data Exchange (ETDEWEB)

Amblard, J C [Commissariat a l' Energie Atomique, Grenoble (France). Centre d' Etudes Nucleaires

1967-07-15

The present note deals with the study regulations of the sampled type, for 1. order process with simple delay. In order to obtain a good stability in such regulations, together with acceptable performances, it is interesting to use polynomial type correctors acting directly on the sampled error signals. The active elements of these correctors can be shared by all the channels to be controlled. Furthermore, the determination of the correction parameters results from an optimal study of the system. In the second part is described the construction of a multiplexed regulation for diffusion ovens. (author) [French] La presente note concerne l'etude des regulations de type echantillonne, pour processus du 1. ordre avec retard pur. Pour obtenir une bonne stabilite de telles regulations, ainsi que des performances correcte il est interessant d'utiliser des correcteurs de type polynomial, agissant directement sur les signaux d'erreur echantillonnes. Les elements actifs de ces correcteurs peuvent etre pris communs a toutes les voies a controler. D'autre part, la determination des parametres de correction decoula d'une etude optimale du systeme. Dans une seconde partie on decrit la realisation d'une regulation multiplexee de fours a diffusion. (auteur)

Optical CDMA components requirements

Science.gov (United States)

Chan, James K.

1998-08-01

Optical CDMA is a complementary multiple access technology to WDMA. Optical CDMA potentially provides a large number of virtual optical channels for IXC, LEC and CLEC or supports a large number of high-speed users in LAN. In a network, it provides asynchronous, multi-rate, multi-user communication with network scalability, re-configurability (bandwidth on demand), and network security (provided by inherent CDMA coding). However, optical CDMA technology is less mature in comparison to WDMA. The components requirements are also different from WDMA. We have demonstrated a video transport/switching system over a distance of 40 Km using discrete optical components in our laboratory. We are currently pursuing PIC implementation. In this paper, we will describe the optical CDMA concept/features, the demonstration system, and the requirements of some critical optical components such as broadband optical source, broadband optical amplifier, spectral spreading/de- spreading, and fixed/programmable mask.

Anthropogenic infrastructure as a component of urbogeosystems

Directory of Open Access Journals (Sweden)

Oleksii Chuiev

2017-11-01

Full Text Available This article deals with the definition of the concept of "anthropogenic infrastructure" and attempts to find its place in the structure of urbogeosystems. The concept itself can not be called new, as many foreign authors have already used it, but the final definition never happened. The reasons why city studies are becoming more relevant in the face of ever-accelerating urbanization are briefly presented. Prerequisites for the emergence of the urban environment and approaches to its study are given. A special attention is paid to the consideration of urbosystems and their component structure. The main four components are described, which include the technosphere, biosphere, population and abiotic nature. The causes of the appearance of urban ecosystems and their specific features are analyzed. Based on the deficiencies of the "Urbosphere", "Urbosystem" and "Urboecosystem", the notion of "Urbogeosystem" is formed once again. Since architectural and construction objects are key components of such systems, their integration into anthropogenic infrastructure allows us to operate with a more general concept. Functional zones of the city, which are part of the anthropogenic infrastructure, are described. These include residential, industrial, forest and park areas. Examples of the use and functioning of each of the zones are given. An attempt has been made to estimate the boundaries of urbogeosystems. The existing approaches to the classification of anthropogenic infrastructure are analyzed. For one of them, it is advisable to allocate separately "hard" and "soft" infrastructure by the nature of the tasks of society, which they are called upon to satisfy. An alternative approach is to divide the anthropogenic infrastructure into "human" and "physical" ones. If the first satisfies the socio-cultural needs of people, the second is used for production, development, establishment of communications, transportation. It is proved why it is expedient to

Study of the machining of uranium carbide rods obtained by continuous casting under electronic bombardment; Etude de l'usinage de barreaux de carbure d'uranium obtenus par coulee continue sous bombardement electronique

Energy Technology Data Exchange (ETDEWEB)

Rousset, P; Accary, A [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

1965-07-01

The authors consider the various methods of machining uranium mono-carbide and compare them critically in the case of their application to uranium carbide obtained by fusion under an electronic bombardment and continuous casting. This study leads them to propose two mechanical machining methods: cylindrical rectification and center-less rectification, preceded by a preliminary roughing out of a cylinder, the latter appearing more suitable. A study of the machining yields as a function of the diameter of the rough bars and of the diameter of the finished rods has shown that an optimum value of the rough bar diameter exists for each value of the finished rod diameter. It is found that the yield increases as the diameter itself increases, this yield rising from 45 per cent to around 70 per cent as the diameter of the rough bars increases from 25-26 mm to 37-38 mm. (authors) [French] Les auteurs envisagent les differentes methodes d'usinage du monocarbure d'uranium et se livrent a une etude critique de celles-ci, dans le cas de leur application a l'usinage de barreaux de carbure d'uranium obtenus par fusion sous bombardement electronique et coulee continue. Cette etude les conduit a proposer deux methodes d'usinage mecanique: la rectification cylindrique et la rectification 'centerless', precedee d'un ebauchage par carottage, la seconde paraissant la plus appropriee. L'etude des rendements d'usinage en fonction du diametre des barreaux bruts et du diametre des barreaux finis, a mis en evidence une valeur optimale du diametre des barreaux bruts pour chaque valeur du diametre des barreaux usines. Elle a montre que le rendement croit lorsque le diametre croit lui-meme, ce rendement passant d'environ 45 pour cent a environ 70 pour cent, lorsque le diametre des barreaux bruts passe de 25-26 mm a 37-38 mm.

Personal Finance: Teaching Concepts and Strategies.

Science.gov (United States)

Gioia, John

1989-01-01

The author describes essential components of a course on personal finance. Concepts to be taught are (1) decision making, (2) income generation, (3) goal setting, (4) budgeting, (5) wise buying, (6) housing, (7) transportation, (8) risk management, and (9) investments. (CH)

On blanket concepts of the Helias reactor

International Nuclear Information System (INIS)

Wobig, H.; Harmeyer, E.; Herrnegger, F.; Kisslinger, J.

1999-07-01

The paper discusses various options for a blanket of the Helias reactor HSR22. The Helias reactor is an upgrade version of the Wendelstein 7-X device. The dimensions of the Helias reactor are: major radius 22 m, average plasma radius 1.8 m, magnetic field on axis 4.75 T, maximum field 10 T, number of field periods 5, fusion power 3000 MW. The minimum distance between plasma and coils is 1.5 m, leaving sufficient space for a blanket and shield. Three options of a breeding blanket are discussed taking into account the specific properties of the Helias configuration. Due to the large area of the first wall (2600 m 2 ) the average neutron power load on the first wall is below 1 MWm .2 , which has a strong impact on the blanket performance with respect to lifetime and cooling requirements. A comparison with a tokamak reactor shows that the lifetime of first wall components and blanket components in the Helias reactor is expected to be at least two times longer. The blanket concepts being discussed in the following are: the solid breeder concept (HCPB), the dual-coolant Pb-17Li blanket concept and the water-cooled Pb-17Li concept (WCLL). (orig.)

Syntheses and study of pyrrolidinic nitroxide free radicals. Preparation of a nitroxide-type stable bi-radical; Synthese et etudes de radicaux libres nitroxydes pyrrolidiniques. Preparation d'un biradical stable du type nitroxyde

Energy Technology Data Exchange (ETDEWEB)

Dupeyre, R M [Commissariat a l' Energie Atomique, Grenoble (France). Centre d' Etudes Nucleaires, Laboratoire de chimie organique physique

1967-12-01

Syntheses and study of pyrrolidinic nitroxide free radicals: These radicals are obtained by oxidation, with hydrogen peroxide, of pyrrolidinic amines prepared from triacetonamine by ring contraction. The U. V,, I. R, and E.P.R. spectral characteristics have been determined. The oxidation of these amines with hydrogen peroxide has led also to rupture of the pentagonal ring; some of the decomposition products have been identified. The high chemical stability of the nitroxide group has made it possible to synthesize and study a stable bi-radical. (author) [French] Syntheses et etudes de radicaux libres nitroxydes pyrrolidiniques: Ces radicaux sont obtenus par oxydation l'eau oxygenee d'amines pyrrolidiniques preparees a partir de la triacetonamine par contraction de cycle. Les caracteristiques spectroscopiques ultra-violettes, infra-rouge et resonance paramagnetique sont determinees. Cependant, 1'oxydation de ces amines a l'eau oxygenee a entraine la coupure du cycle pentagonal et identification de certaines substances de decomposition obtenues. La grande stabilite chimique de groupement nitroxyde a permis la synthese et l'etude d'un biradical stable. (auteur)

SEPA (Service d'etudes, de Procedes et Analyses)

International Nuclear Information System (INIS)

2017-01-01

The SEPA (Service d'etudes, de Procedes et Analyses), is an engineering department specializing in the analysis and processing of uranium ore. It comes from a long tradition of mining in France that began sixty-five years ago with the French Atomic Energy Commission (CEA) and that has been carried on by COGEMA and then Areva. SEPA brings a combination of experience and excellence to its activities thanks to its multidisciplinary staff (mineralogists, chemists, mechanical engineers, instrumentation specialists...), who come from diverse cultural backgrounds. Today, the SEPA draws on its wealth of know-how and expertise to devise and develop new methods for processing and valorizing ores everywhere in the world. Its mission is to: - Develop and conduct laboratory tests on methods for processing uranium and other valuable elements such as molybdenum, vanadium, rare earths, niobium, tantalum and thorium; - Analyze ores obtained during prospecting at locations all over the world; -Serve as an advisor in the commissioning of Areva industrial units and ore processing plants; -Perform environmental analyses during the full period of mining operations; -Conduct audits and provide advice on processes and analysis methods; -Carry out research and development in all aspects of minerals treatment (including the filing of patents). The SEPA combines experience, skills and a global approach to technologies used in ore processing. Its role is to continually improve the processes for extracting, processing and valorizing ores while protecting the environment

Promoting Transfer of Ecosystems Concepts

Science.gov (United States)

Yu, Yawen; Hmelo-Silver, Cindy E.; Jordan, Rebecca; Eberbach, Catherine; Sinha, Suparna

2016-01-01

This study examines to what extent students transferred their knowledge from a familiar aquatic ecosystem to an unfamiliar rainforest ecosystem after participating in a technology-rich inquiry curriculum. We coded students' drawings for components of important ecosystems concepts at pre- and posttest. Our analysis examined the extent to which each…

Studies of magnetism with inelastic scattering of cold neutrons; Etudes de magnetisme realisees a l'aide de la diffusion inelastique de neutrons froids

Energy Technology Data Exchange (ETDEWEB)

Jacrot, B [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

1964-07-01

Inelastic scattering of cold neutrons can be used to study some aspects of magnetism: spins waves, exchange integrals, vicinity of Curie point. After description of the experimental set-up, several experiments, in the fields mentioned above, are analysed. (author) [French] La technique de diffusion inelastique des neutrons froids est utilisee pour etudier certains aspects du magnetisme: ondes de spins, integrales d'echange, etude au voisinage du point de Curie, etc. Apres une description de l'appareillage, on analyse diverses experiences effectuees dans les domaines enumeres plus haut. (auteur)

Component-Based Software Engineering and Runtime Type Definition

OpenAIRE

A. R. Shakurov

2011-01-01

The component-based approach to software engineering, its current implementations and their limitations are discussed. A new extended architecture for such systems is presented. Its main architectural concepts and principles are considered.

Explaining the entropy concept and entropy components

Directory of Open Access Journals (Sweden)

Marko Popovic

2018-04-01

Full Text Available Total entropy of a thermodynamic system consists of two components: thermal entropy due to energy, and residual entropy due to molecular orientation. In this article, a three-step method for explaining entropy is suggested. Step one is to use a classical method to introduce thermal entropy STM as a function of temperature T and heat capacity at constant pressure Cp: STM = ∫(Cp/T dT. Thermal entropy is the entropy due to uncertainty in motion of molecules and vanishes at absolute zero (zero-point energy state. It is also the measure of useless thermal energy that cannot be converted into useful work. The next step is to introduce residual entropy S0 as a function of the number of molecules N and the number of distinct orientations available to them in a crystal m: S0 = N kB ln m, where kB is the Boltzmann constant. Residual entropy quantifies the uncertainty in molecular orientation. Residual entropy, unlike thermal entropy, is independent of temperature and remains present at absolute zero. The third step is to show that thermal entropy and residual entropy add up to the total entropy of a thermodynamic system S: S = S0 + STM. This method of explanation should result in a better comprehension of residual entropy and thermal entropy, as well as of their similarities and differences. The new method was tested in teaching at Faculty of Chemistry University of Belgrade, Serbia. The results of the test show that the new method has a potential to improve the quality of teaching.

Experimental study of contamination by inhalation of radioactive iodine aerosols. Biological balance; Etude experimentale de la contamination par inhalation d'aerosols d'iode radioactif bilan biologique

Energy Technology Data Exchange (ETDEWEB)

Marble, G [Commissariat a l' Energie Atomique, 92 - Fontenay-aux-Roses (France). Centre d' Etudes Nucleaires

1968-07-01

Several articles have been published concerning research into contamination produced by inhalation of radioactive iodine aerosols in monkeys. Results dealing with the biological balance of this contamination are presented and discussed in this report. (author) [French] L'etude experimentale de la contamination par inhalation d'aerosols d'iode radioactif effectuee chez le singe a fait l'objet de plusieurs publications. Les resultats concernant le bilan biologique de cette contamination sont presentes et discutes dans ce rapport. (auteur)

Studies of iron carbon alloys; Contribution a l'etude des alliages dilues de carbone dans le fer {alpha}

Energy Technology Data Exchange (ETDEWEB)

Anagnostopoulos, T [Commissariat a l' Energie Atomique, Grenoble (France). Centre d' Etudes Nucleaires

1971-07-01

Precipitation of carbon in {alpha} iron during a thermal treatment was followed using the magnetic after effect. A study was made of the influence of different parameters such as quenching speed, annealing rate, carbon concentration with or without impurity, irradiation effects. A transient sur-saturation occurs during dissolution of carbon in iron at 500 C. (author) [French] La precipitation du carbone dans le fer au cours d'un traitement thermique a ete suivie au moyen du trainage magnetique. L'etude de differents parametres tels que: vitesse de trempe, mode de recuit, concentration en carbone, presence d'impuretes, effet d'une irradiation, ont ete menes a bien. Un phenomene de sursaturation transitoire au cours de la remise en solution a 500 C a ete mis en evidence. (auteur)

Patient Autonomy for the Management of Chronic Conditions: A Two-Component Re-conceptualization

Science.gov (United States)

Naik, Aanand D.; Dyer, Carmel B.; Kunik, Mark E.; McCullough, Laurence B.

2010-01-01

The clinical application of the concept of patient autonomy has centered on the ability to deliberate and make treatment decisions (decisional autonomy) to the virtual exclusion of the capacity to execute the treatment plan (executive autonomy). However, the one-component concept of autonomy is problematic in the context of multiple chronic conditions. Adherence to complex treatments commonly breaks down when patients have functional, educational, and cognitive barriers that impair their capacity to plan, sequence, and carry out tasks associated with chronic care. The purpose of this article is to call for a two-component re-conceptualization of autonomy and to argue that the clinical assessment of capacity for patients with chronic conditions should be expanded to include both autonomous decision making and autonomous execution of the agreed-upon treatment plan. We explain how the concept of autonomy should be expanded to include both decisional and executive autonomy, describe the biopsychosocial correlates of the two-component concept of autonomy, and recommend diagnostic and treatment strategies to support patients with deficits in executive autonomy. PMID:19180389

Study of beam-plasma interactions in the presence of a magnetic field; Etude d'interactions faisceau-plasma en la presence d'un champ magnetique

Energy Technology Data Exchange (ETDEWEB)

Etievant, C [Commissariat a l' Energie Atomique, Fontenay-aux-Roses (France). Centre d' Etudes Nucleaires

1963-12-15

The instabilities developing in a 'beam-plasma' system and in a 'double-beam' system in the presence of a magnetic field are discussed theoretically starting from the conductivity tensor expression for a multi-beam system. Oblique propagation is taken into account and this leads to the introduction of certain instability mechanisms which would not appear in the case of a propagation which is purely parallel or perpendicular to the magnetic field. Two experiments are described: a) Study of the collision of two counterstreaming electron beams: An instability has been observed experimentally which leads to the generation of a stationary cyclotron wave having a frequency of {omega}{sub ce}/2. A description is given of the measurement of the interaction frequency, of the wavelength and of the build-up time of the wave. b) Study of a 'beam-plasma' system: A description is given of the measurement of the spectra of excited waves and of the perturbation of the beam velocity distribution at the plasma-exit. This perturbation is very pronounced when 'plasma-plasma' interaction appears in the system. A study into cyclotron oscillations produced in the plasma by excitation due to the passage of the beam is also described in this report. (author) [French] Les instabilites se developpant dans un systeme 'faisceau-plasma' et dans un systeme 'faisceau-faisceau' en la presence d'un champ magnetique sont discutees theoriquement a partir de l'expression du tenseur de conductivite d'un systeme multi-faisceaux. La propagation oblique est prise en consideration, ce qui introduit certains mecanismes d'instabilite qui n'apparaitraient pas pour une propagation purement parallele ou perpendiculaire au champ magnetique. Deux experiences sont decrites: a) Etude de la collision de deux faisceaux d'electrons: Une instabilite conduisant a la generation d'une onde cyclotronique stationnaire a la frequence {omega}{sub ce}/2 a ete observee experimentalement. Les mesures de la frequence d

Calling to Nursing: Concept Analysis.

Science.gov (United States)

Emerson, Christie

The aims of this article are (a) to analyze the concept of a calling as it relates nursing and (b) to develop a definition of calling to nursing with the detail and clarity needed to guide reliable and valid research. The classic steps described by Walker and Avant are used for the analysis. Literature from several disciplines is reviewed including vocational psychology, Christian career counseling, sociology, organizational management, and nursing. The analysis provides an operational definition of a calling to nursing and establishes 3 defining attributes of the concept: (a) a passionate intrinsic motivation or desire (perhaps with a religious component), (b) an aspiration to engage in nursing practice, as a means of fulfilling one's purpose in life, and (c) the desire to help others as one's purpose in life. Antecedents to the concept are personal introspection and cognitive awareness. Positive consequences to the concept are improved work meaningfulness, work engagement, career commitment, personal well-being, and satisfaction. Negative consequences of having a calling might include willingness to sacrifice well-being for work and problems with work-life balance. Following the concept analysis, philosophical assumptions, contextual factors, interdisciplinary work, research opportunities, and practice implications are discussed.

Technological study of organic fluids; Etudes technologiques des fluides caloporteurs organique

Energy Technology Data Exchange (ETDEWEB)

Leveque, P [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

1964-07-01

Under contract to EURATOM (MM. VAN der VENNE and HANNAERT), the C.E.A. and the Progil Society have collaborated on a technological study of the terphenyls. The results obtained from the radiolysis and pyrolysis of the product OM2 (70 p. 100 m-terphenyl, 25 p. 100 o-terphenyl, 5 p. 100 p-terphenyl) are reported. Using two pile loops at temperatures up to 450 deg. C, a phenomena of accelerated pyrolysis on the radiolized material has been demonstrated. Some by-products of the petroleum industry have also been studied, with a view to finding substitutes for terphenyl. (author) [French] Le C.E.A. et la Societe PROGIL ont entrepris en commun sous contrat EURATOM (MM. VAN der VENNE et HANNAERT) une etude technologique des terphenyles. Les resultats de radiolyse et de pyrolyse obtenus sur le produit OM2 (70 p. 100 m-terphenyle, 25 p. 100 o-terphenyle. 5 p. 100 de p-terphenyle) sont exposes. L'exploitation de deux boucles en pile jusqu'a des temperatures de 450 deg. C a mis en evidence un phenomene de pyrolyse acceleree sur le produit radiolyse. On a etudie egalement quelques sous-produits de l'industrie petroliere dans le but de trouver des substituts au terphenyle. (auteur)

The abject gaze and the homosexual body: Flandrin's Figure d'Etude.

Science.gov (United States)

Camille, M

1994-01-01

This article charts the history of the reception, reproduction and appropriation of a single image that has recently become a kind of "gay icon"--the Figure d'Etude in the Louvre, painted by Hippolyte Flandrin in 1835. Initially no more than a neo-classical academic exercise, the formal emptiness of this picture meant that it could be re-invested and reinscribed with new meanings and new titles at every turn. Emblematic of the anxious visibility/invisibility of the newly discovered homosexual body during a period when the gaze still had to be kept a dark secret, Flandrin's image only "came out" in its later photographic reworkings by Frederick Holland Day and Baron von Gloeden. After being reproduced for a specifically homosexual audience early this century, the popular Romantic pose of the young man curled-up in profile became a standard one, reappearing recently in the photographs of Robert Mapplethorpe. The inactive, abject and inward-turned isolation of the figure with its narcissistic self-absorption makes it, in my view, a profoundly negative stereotype of the gay gaze and the homosexual body. Flandrin's figure nonetheless appears today on gay merchandise world-wide as a sign of our separate and secluded subject positions and our community's unwillingness to radically alter older imposed and inherited classical stereotypes.

Contribution to the study of recoil species produced by potassium ferrocyanide neutron irradiation; Contribution a l'etude de la reactivite des especes de recul dans le ferrocyanure de potassium irradie aux neutrons thermiques

Energy Technology Data Exchange (ETDEWEB)

Meriadec Vernier de Byans, B. [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

1969-04-01

The chemical species produced by potassium ferrocyanide neutron irradiation were separated and identified. The study of their behaviour upon thermal annealing has allowed to establish a scheme of reaction as well as a kinetic treatment of the data. Activation energies are determined in different conditions and the effects of radiation dose, oxygen and water of crystallisation upon the activation energies were studied. Preliminary E.S.R. data and its relevance to the decomposition process is also discussed. (authors) [French] On a separe et identifie les differentes especes chimiques produites par irradiation neutronique de ferrocyanure de potassium. L'etude de leur comportement au cours du recuit thermique a permis l'application de differentes cinetiques et l'etablissement d'un schema de reaction. On a deterrmine la valeur des energies d'activation dans differentes conditions de recuit ainsi que l'influence de la dose de radiations, de l'oxygene et de l'eau de cristallisation sur ces energies. Une serie de mesures de resonance paramagnetique electronique a complete cette etude. (auteurs)

The study of some thiazinic and indaminic dye syntheses induced by ionising radiation; Etude de quelques syntheses de colorants thianziniques et indaminiques amorcees par les rayonnements ionisants

Energy Technology Data Exchange (ETDEWEB)

Balestic, S [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

1961-03-15

With a view to finding some radiochemical reactions applicable on an industrial scale for evaluating the radioactive waste from nuclear reactors, a systematic study was made of the radiochemical synthesis of thiazinic dyes such as methylene blue and Lauths' violet, on which the first tests were carried out in 1954. The first part of the study concerned the identification and the dosage, during radiolysis, of dyes by means of their absorption spectra after separation from the reaction medium by adsorption chromatography or ion-exchange; other radiolysis products such as ammonium chloride and hydrogen peroxide were also identified. During a later stage by systematically varying the physico-chemical parameters it was possible to determine the most favourable conditions for radio-synthesis; the maximum radiochemical yields obtained had the following values: G (Lauths' violet) 1,65; G (Methylene blue) = 1,75. Furthermore, the study of the influence of variously substituted aminated products on the radiochemical yield showed the possibility of synthesising Bindsehedlers green and Wursters blue by radiochemical methods. Finally the discovery of a fundamental intermediate product, Wursters red, together with the kinetic study of the chemical synthesis of methylene blue made it possible to determine the main stages of the reaction mechanism and to decide which of these stages could be attributed to ionising radiations in the case of the radiochemical synthesis. (author) [French] Dans le but de trouver des reactions radiochimiques susceptibles d'une application industrielle pour valoriser les dechets radioactifs provenant des reacteurs nucleaires, il a ete entrepris une etude systematique de la synthese radiochimique des colorants thiazimiques tels que le Bleu de Methylene et le Violet de Lauth dont les premiers essais ont ete effectues par Loiseleur en 1954. La premiere partie de l'etude a porte sur l'identification et le dosage des colorants formes au cours de la radiolyse

Relating Complexity and Error Rates of Ontology Concepts. More Complex NCIt Concepts Have More Errors.

Science.gov (United States)

Min, Hua; Zheng, Ling; Perl, Yehoshua; Halper, Michael; De Coronado, Sherri; Ochs, Christopher

2017-05-18

Ontologies are knowledge structures that lend support to many health-information systems. A study is carried out to assess the quality of ontological concepts based on a measure of their complexity. The results show a relation between complexity of concepts and error rates of concepts. A measure of lateral complexity defined as the number of exhibited role types is used to distinguish between more complex and simpler concepts. Using a framework called an area taxonomy, a kind of abstraction network that summarizes the structural organization of an ontology, concepts are divided into two groups along these lines. Various concepts from each group are then subjected to a two-phase QA analysis to uncover and verify errors and inconsistencies in their modeling. A hierarchy of the National Cancer Institute thesaurus (NCIt) is used as our test-bed. A hypothesis pertaining to the expected error rates of the complex and simple concepts is tested. Our study was done on the NCIt's Biological Process hierarchy. Various errors, including missing roles, incorrect role targets, and incorrectly assigned roles, were discovered and verified in the two phases of our QA analysis. The overall findings confirmed our hypothesis by showing a statistically significant difference between the amounts of errors exhibited by more laterally complex concepts vis-à-vis simpler concepts. QA is an essential part of any ontology's maintenance regimen. In this paper, we reported on the results of a QA study targeting two groups of ontology concepts distinguished by their level of complexity, defined in terms of the number of exhibited role types. The study was carried out on a major component of an important ontology, the NCIt. The findings suggest that more complex concepts tend to have a higher error rate than simpler concepts. These findings can be utilized to guide ongoing efforts in ontology QA.

F{sup 19} relaxation in non-magnetic hexafluorides; Contribution a l'etude de la relaxation des fluors dans les hexafluorures non magnetiques

Energy Technology Data Exchange (ETDEWEB)

Rigny, P [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

1967-12-01

The interesting properties of the fluorine magnetic resonance in the hexafluorides of molybdenum, tungsten and uranium, are very much due to large anisotropies of the chemical shift tensors. In the solid phases these anisotropies, the values of which are deduced from line shape studies, allow one to show that the molecules undergo hindered rotations about the metal atom. The temperature and frequency dependence of the fluorine longitudinal relaxation times shows that the relaxation is due to the molecular motion. The dynamical parameters of this motion are then deduced from the complete study of the fluorine relaxation in the rotating frame. In the liquid phases, the existence of anisotropies allows an estimation of the different contributions to the relaxation. In particular, the frequency and temperature dependence of the relaxation shows it to be dominated by the spin-rotation interaction. We have shown that the strength of this interaction can be deduced from the chemical shifts, and the angle through which the molecule rotates quasi-freely can be determined. In the hexafluorides, this angle is roughly one radian at 70 C, and with the help of this value, the friction coefficients which describe the intermolecular interactions are discussed. (author) [French] Les proprietes de la resonance magnetique des fluors dans les hexafluorures de molybdene, tungstene et uranium sont influencees par l'existence de deplacements chimiques tres anisotropes. Dans les phases solides, la valeur de cette anisotropie peut etre determinee par l'analyse des formes de raies et son existence permet de montrer que les molecules sont en rotation empechee autour de leur atome central. L'etude du temps de relaxation longitudinal en fonction de la temperature et de la frequence montre que la relaxation est due aux mouvements moleculaires, aux plus hautes temperatures. Les proprietes dynamiques du mouvement sont obtenues par l'etude complete de la relaxation spin-reseau dans le referentiel

Analysis of a human phenomenon: self-concept.

Science.gov (United States)

LeMone, P

1991-01-01

This analysis of self-concept includes an examination of definitions, historical perspectives, theoretical basis, and closely related terms. Antecedents, consequences, defining attributes, and a definition were formulated based on the analysis. The purpose of the analysis was to provide support for the use of the label "self-concept" as a broad category that encompasses the self-esteem, identity, and body-image nursing diagnoses within Taxonomy I. This classification could allow the use of a broad diagnostic label to better describe conditions that necessitate nursing care. It may also further explain the relationships between and among those diagnoses that describe human responses to disturbance of any component of the self-concept.

Contribution to research on the metabolism of fission product. Studies on the physico-chemical state and the metabolic fate of radio-cerium solution; Contribution a l'etude du metabolisme des produits de fission. Recherches sur l'etat physico-chimique et le devenir metabolique des solutions de radiocerium

Energy Technology Data Exchange (ETDEWEB)

Aeberhardt, A [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

1961-07-01

This paper describes a study of the physico-chemical state of radio-cerium in dilute solutions on the tracer scale, as a function of the pH of the solution. The way in which this radioelement is transported in the blood is studied in vitro and in vivo, with reference to the ionic or colloidal state of the radio-cerium used. The distribution of cerium amongst the various components of the blood is studied by a new method of blood fractionation and by paper electrophoresis. Evidence of a cerium globulin connection is shown in the case of ionic cerium. A study of the initial distribution of radio-cerium in rats, after intravenous administration of ionic or colloidal solutions, shows considerable differences according to the physico-chemical state of the cerium injected. (author) [French] Ce travail presente une etude de l'etat physico-chimique du radiocerium en solutions diluees a l'echelle des indicateurs, en fonction du pH de la solution. En fonction de l'etat ionique ou colloidal du radiocerium utilise, le mode de transport de ce radioelement dans le sang est etudie in vitro et in vivo. La distribution du cerium entre les differents constituants du sang est etudiee par une methode nouvelle de fractionnement du sang et par electrophorese sur papier. L'existence d'une liaison cerium-globuline est mise en evidence dans le cas du cerium ionique. L'etude de la distribution initiale du radiocerium, chez le rat apres administration par voie veineuse de solutions ionique ou colloidale, montre des differences importantes en fonction de l'etat physico-chimique du cerium injecte. (auteur)

Metacognitive components in smart learning environment

Science.gov (United States)

Sumadyo, M.; Santoso, H. B.; Sensuse, D. I.

2018-03-01

Metacognitive ability in digital-based learning process helps students in achieving learning goals. So that digital-based learning environment should make the metacognitive component as a facility that must be equipped. Smart Learning Environment is the concept of a learning environment that certainly has more advanced components than just a digital learning environment. This study examines the metacognitive component of the smart learning environment to support the learning process. A review of the metacognitive literature was conducted to examine the components involved in metacognitive learning strategies. Review is also conducted on the results of study smart learning environment, ranging from design to context in building smart learning. Metacognitive learning strategies certainly require the support of adaptable, responsive and personalize learning environments in accordance with the principles of smart learning. The current study proposed the role of metacognitive component in smart learning environment, which is useful as the basis of research in building environment in smart learning.

Single-wheel drive with new electric components. Einzelradantrieb mit neuen E-Komponenten

Energy Technology Data Exchange (ETDEWEB)

Westendorf, H. (Fichtel und Sachs AG, Schweinfurt (Germany)); Schiebold, S. (Fichtel und Sachs AG, Schweinfurt (Germany)); Ehrhart, P. (Fichtel und Sachs AG, Schweinfurt (Germany)); Lindner, L. (Fichtel und Sachs AG, Schweinfurt (Germany))

1991-01-01

Fundamentally important developments and innovations in the fields of magnetic materials, plastics technology and electronics, together with new control concepts, make a new drive concept possible for passenger cars produced in series. The concept, which makes use of a combustion engine and an all-electric power transmission with a single-wheel drive, is presented, together with its components. (orig./HW)

Study of gamma radiation between 0.1 and 1.0 MeV in the earth's atmosphere; Etude du rayonnement gamma entre 0,1 et 1 Mev dans l'atmosphere terrestre

Energy Technology Data Exchange (ETDEWEB)

Boclet, D [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

1967-01-01

The present work is devoted to some of the particular problems arising in the detection and localisation of sources of gamma radiation situated outside the earth's atmosphere. These weak sources can only be detected and localized if care is taken to eliminate gamma and particle radiations coming from other sources in the earth's atmosphere and in space. In order to separate the various sources of background noise, generally much stronger than the radiation under study, use is made of a directional detector whose characteristics are determined as described in the first part of the following report. The closest diffuse source considered is that constituted by the earth's atmosphere. Its detailed study will make it possible both to eliminate its effect when sources outside the earth are to be measured, and to predict the amount of secondary gamma radiation emitted by the same process in other celestial bodies, the moon in particular. This work considered in the 2. and 3. parts of the report. (author) [French] La presente etude est consacree a certains des problemes particuliers poses par la detection et la localisation des sources de rayonnement gamma situees hors de l'atmosphere terrestre. Ces sources faibles ne peuvent etre detectees et localisees que si l'on se protege des rayonnements gamma et particulaires provenant d'autres sources situees dans l'atmosphere terrestre et dans l'espace. Pour separer ces divers composants parasites, en general beaucoup plus intenses que le rayonnement a etudier, nous emploierons un detecteur directif dont nous determinons les caracteristiques dans la premiere partie de l'expose qui suit. La source diffuse la plus proche que nous considerons comme parasite est constituee par l'atmosphere terrestre. Son etude detaillee nous permettra d'une part de nous en proteger lorsque nous voudrons etudier les sources {gamma} extra-terrestres, d'autre part de prevoir le rayonnement gamma secondaire emis par le meme processus pour les autres corps

All-Fiber Components for Micro-Structured Fibers, Phase I

Data.gov (United States)

National Aeronautics and Space Administration — We propose new concepts for developing components for high performance space based Lidar systems. While it is generally recognized that photonic crystal fiber...

Study of transfer reactions ({alpha},t), ({alpha},{sup 3}He) in the f-p shell: mechanism and spectroscopic use; Etude des reactions de transfert ({alpha},t), ({alpha},{sup 3}He) dans la couche f-p mecanisme et utilisation spectroscopique

Energy Technology Data Exchange (ETDEWEB)

Roussel, P [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

1968-05-01

We describe an experimental study of ({alpha},t), ({alpha},{sup 3}He) reactions at 44 MeV using a solid-state identifier, on the target-nuclei {sup 54}Fe and {sup 58,60,62,64}Ni. A critical study of optical model and of disturbed wave analysis has been performed. We show the complementarity of different transfer-reactions, the ambiguity of spectroscopic factors, the importance of the problem of the reaction mechanism. (author) [French] On decrit une etude experimentale des reactions ({alpha},t), ({alpha},{sup 3}He) a 44 MeV utilisant un systeme identificateur de particules sur les noyaux-cibles {sup 54}Fe et {sup 58,60,62,64}Ni. Une etude critique de modele optique et d'analyse en ondes deformees (D.W.B.A.) a ete entreprise. On montre la complementarite des differentes reactions de transfert, l'ambiguite des facteurs spectroscopiques, l'importance du probleme du mecanisme. (auteur)

Study of cerenkov radiation. Production of {gamma} rays by electron accelerators; Etude du rayonnement de freinage. Production de rayons {gamma} par des accelerateurs d'electrons

Energy Technology Data Exchange (ETDEWEB)

Bernard, J [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

1961-07-01

This study is a critical comparison of the theories of Bremsstrahlung. Experimental results obtained by the production of {gamma} radiation with electron accelerators are compared to the theoretical results in order to estimate the extent to which the various theories are valid. (author) [French] Cette etude est une synthese des theories du rayonnement de freinage. Des resultats experimentaux, obtenus par la production de rayonnements {gamma} avec des accelerateurs d'electrons, sont compares aux resultats theoriques afin d'evaluer les domaines de validite des diverses theories. (auteur)

Contribution to the study of samarium-151 excited levels; Contribution a l'etude des niveaux excites du samarium-151

Energy Technology Data Exchange (ETDEWEB)

Locard, P [Commissariat a l' Energie Atomique, Centre d' Etudes Nucleaires de Grenoble, 38 (France)

1967-07-01

The nucleus of {sup 151}Sm, which has 89 neutrons, happens to be on the lower edge of the deformed nuclei of region II. Therefore, the study of its levels is very interesting for the verification of the goodness of the collective models for deformed nuclei when the deformation is small (we introduce these models in the first chapter). {sup 151}Sm has often been studied, but the direct gamma spectrum measured with a lithium drift-germanium detector (chapter 3) shows many high energy transitions which did not appear in the previous level schemes. In order to settle these transitions, we have undertaken gamma-gamma coincidence spectra (as well as sum-coincidence spectra) experiments with a scintillation spectrometer designed in our laboratory (chapter 2). The investigation of the intensities of these coincidences leads us to modify the last proposed level schemes: we suppress the levels at 405,5 and 650 keV, we add levels at 245,6 - 306,6 - 522 - 952 and 962 keV. We have also verified the multipolarities of the main transitions and measured the half-lives of a few levels (chapter 3) (we find a half-life of 1.1 {+-} 0.5 nanosecond for the level at 167,7 keV). In chapter 4, we compare our results to the predictions of the models described in chapter 1. (author) [French] Le noyau de {sup 151}Sm, qui possede 89 neutrons, se trouve a la limite inferieure des noyaux deformes de la region II. L'etude de ses niveaux excites est donc d'un interet tout particulier pour la verification de la validite des differents modeles collectifs pour les noyaux deformes, lorsque la deformation est petite (nous introduisons ces modeles dans un premier chapitre). Le {sup 151}Sm a deja fait l'objet de nombreuses etudes, mais le spectre gamma direct fait avec une jonction de germanium compense au lithium (chapitre 3), nous a montre l'existence d'un grand nombre de transitions de hautes energies qui ne sont pas placees dans les schemas proposes jusqu'a ce jour. Pour preciser la place de ces

Lay Worker Health Literacy: A Concept Analysis and Operational Definition.

Science.gov (United States)

Cadman, Kathleen Paco

2017-10-01

The concept of lay worker health literacy is created by concurrently analyzing and synthesizing two intersecting concepts, lay workers and health literacy. Articulation of this unique intersection is the result of implementing a simplified Wilson's Concept Analysis Procedure. This process incorporates the following components: a) selecting a concept, b) determining the aims/purposes of analysis, c) identifying all uses of the concept, d) determining defining attributes, e) identifying a model case, f) identifying borderline, related, contrary, and illegitimate cases, g) identifying antecedents and consequences, and h) defining empirical referents. Furthermore, as current literature provides no operational definition for lay worker health literacy, one is created to contribute cohesion to the concept. © 2017 Wiley Periodicals, Inc.

Study of immiscibilities in the trilaurylamine - dodecane - nitric acid - plutonium system; Etude des immiscibilites dans le systeme trilaurylamine - dodecane - acide nitrique - plutonium

Energy Technology Data Exchange (ETDEWEB)

Saey, J C [Commissariat a l' Energie Atomique, Fontenay-aux-Roses (France). Centre d' Etudes Nucleaires

1968-07-01

Phase equilibrium in systems made up of trilaurylamine, dodecane, nitric acid tetravalent plutonium is shown by drawing the triangular diagrams. the study of these diagrams provides informations concerning the causes of immiscibility. Heterogeneity of the organic mixtures can be related to some characteristics of the components- dipole moment, molecular polarizability and hydrogen bond exchanging ability-Depending on these, some rules may be established which can be used to make a proper choice of an additive in order to improve the miscibility. As an application a study on the partial substitution of dodecane with decalin, in plutonium extraction experiments, has been done showing a possible improvement of the extraction process. (author) [French] L equilibre des phases dans les systemes formes a partir de trilaurylamine, de dodecane, d'acide nitrique et de plutonium tetravalent est represente en tracant les diagrammes triangulaires. L'examen de ces diagrammes permet d'apporter certaines precisions en ce qui concerne l'origine des immiscibilites. Celles ci sont ensuite reliees a certaines caracteristiques des constituants: le moment dipolaire, la polarisabilite moleculaire et la tendance a former des liaisons hydrogene. Sur les memes bases, il est possible d'etablir un certain nombre de regles pouvant servir a guider le choix d'un additif ameliorant la miscibilite. En application, une etude sur le remplacement partiel du dodecane par la decaline montre l'interet de l'emploi de ce compose dans le procede de purification du plutonium. (auteur)

Solidification of residual fission-product solutions; laboratory studies; Solidification de solutions residuaires concentrees de produits de fission: etudes de laboratoire

Energy Technology Data Exchange (ETDEWEB)

Boniaud, R; Cohen, P; Sombret, C [Commissariat a l' Energie Atomique, Saclay (France).Centre d' Etudes Nucleaires

1961-07-01

This paper describes the results obtained, at laboratory scale, during the study of the incorporation of fission products into glasses and synthetic micas. The rate of leaching of fission products from the glass and their volatility during firing were measured. A hot cell was built to complete these results. (author) [French] Ce rapport resume le resultat des etudes faites en laboratoire (activite de l'ordre du millicurie) sur l'incorporation des produits de fission dans des verres et micas synthetiques. On a mesure le taux de lixiviation des produits de fission et leur volatilisation au cours de la cuisson. Une cellule chaude a ete installee pour completer ces resultats au moyen d'essais realises avec une activite superieure. (auteur)

THEORETICAL CONTEXT EVOLUTION OF THE CONCEPT OF «NATION»

OpenAIRE

Іванов, Микола Семенович; Гречук, О. В.

2015-01-01

There are a lot of approaches to understand the concept of «nation». Scientific interest to the problem of determining the nature of this phenomenon is substantiated. Some researchers define the nation as an ethnic community, others have put the basis for understanding the nation’s social and psychological components. In particular, the concept of nation German sociologist M. Weber was formed in the system of concepts such as «nation-state», «culture», and was closely associated with such are...

Prototyping of automotive components with variable width and depth

Science.gov (United States)

Abeyrathna, B.; Rolfe, B.; Harrasser, J.; Sedlmaier, A.; Ge, Rui; Pan, L.; Weiss, M.

2017-09-01

Roll forming enables the manufacturing of longitudinal components from materials that combine high strength with limited formability and is increasingly used in the automotive industry for the manufacture of structural and crash components. An extension of conventional roll forming is the Flexible Roll Forming (FRF) process where the rolls are no longer fixed in space but are free to move which enables the forming of components with variable cross section over the length of the part. Even though FRF components have high weight saving potential the technology has found only limited application in the automotive industry. A new flexible forming facility has recently been developed that enables proof of concept studies and the production of FRF prototypes before a full FRF line is built; this may lead to a wider uptake of the FRF technology in the automotive industry. In this process, the pre-cut blank is placed between two clamps and the whole set up moves back and forth; a forming roll that is mounted on a servo-controlled platform with six degrees of freedom forms the pre-cut blank to the desired shape. In this study an initial forming concept for the flexible roll forming of an automotive component with variable height is developed using COPRA® FEA RF. This is followed by performing experimental prototyping studies on the new concept forming facility. Using the optical strain measurement system Autogrid Compact, material deformation, part shape and wrinkling severity are analysed for some forming passes and compared with the numerical results. The results show that the numerical model gives a good representation of material behaviour and that with increasing forming severity wrinkling issues need to be overcome in the process.

Development of FBR integrity system code. Basic concept

International Nuclear Information System (INIS)

Asayama, Tai

2001-05-01

For fast breeder reactors to be commercialized, they must be more reliable, safer, and at the same, economically competitive with future light water reactors. Innovation of elevated temperature structural design standard is necessary to achieve this goal. The most powerful way is to enlarge the scope of structural integrity code to cover items other than design evaluation that has been addressed in existing codes. Items that must be newly covered are prerequisites of design, fabrication, examination, operation and maintenance, etc. This allows designers to choose the most economical combination of design variations to achieve specific reliability that is needed for a particular component. Designing components by this concept, a cost-minimum design of a whole plant can be realized. By determining the reliability that must be achieved for a component by risk technologies, further economical improvement can be expected by avoiding excessive quality. Recognizing the necessity for the codes based on the new concept, the development of 'FBR integrity system code' began in 2000. Research and development will last 10 years. For this development, the basic logistics and system as well as technologies that materialize the concept are necessary. Original logistics and system must be developed, because no existing researches are available in and out of Japan. This reports presents the results of the work done in the first year regarding the basic idea, methodology, and structure of the code. (author)

Component-oriented approach to the development and use of numerical models in high energy physics

International Nuclear Information System (INIS)

Amelin, N.S.; Komogorov, M.Eh.

2002-01-01

We discuss the main concepts of a component approach to the development and use of numerical models in high energy physics. This approach is realized as the NiMax software system. The discussed concepts are illustrated by numerous examples of the system user session. In appendix chapter we describe physics and numerical algorithms of the model components to perform simulation of hadronic and nuclear collisions at high energies. These components are members of hadronic application modules that have been developed with the help of the NiMax system. Given report is served as an early release of the NiMax manual mainly for model component users

[A concept analysis of assertiveness].

Science.gov (United States)

Park, Hyoung-Sook; Yang, Young-Ok

2006-06-01

The purpose of this study was to analyze and clarify the meaning of the concept, assertiveness. This study used Walker and Avant's process of concept analysis. 1. Attributes of assertiveness were defined as 1) Self-esteem 2) Comprehension to others 3) Clarification of the subject 4) Verbal communication 5) Non-verbal communication. 2. The antecedents of assertiveness consist of these facts 1) The occurrence of a conflict situation 2) The occurrence of will to stick to one's opinions. 3. There are consequences occurring as a result of assertiveness 1) Positive self-confidence 2) Increased comprehension or consideration to others 3) Expand of mutual respect 4) Maintenance of continuously cooperative relationship with each other 5) Output of acceptable results to each other. Assertiveness is a core human behavior and is key to interpersonal relationships. Using the components of the concept of assertiveness, many conflicts in a nursing situation can be effectively prevented.

Study of a photomultiplier for the measurement of low light flows by photon counting; Etude d'un photomultiplicateur en vue de la mesure des faibles flux lumineux par comptage de photons

Energy Technology Data Exchange (ETDEWEB)

Haye, Kleber

1964-03-20

After a recall of the history of the discovery and use of the photoemission effect, a presentation of the main characteristics of photomultipliers, a discussion of performance and weaknesses of electron multiplier-based cells, this research thesis addresses the study of low light flows. The author tried to determine whether it was possible, at ambient temperature, to reduce the influence of the thermoelectric effect. In order to do so, he made a detailed study of the amplitude spectrum of pulses of photoelectric origin. In order to analyse the influence of temperature of photomultiplier characteristics, he studied, with respect to temperature, the variation of the counting rate corresponding to darkness, the variation of pulse amplitude spectrum, and relative variations of the quantum efficiency for various wavelengths. In parallel with the study by counting, a study has been performed by using the well known mean current measurement [French] Si l'on veut etudier de faibles flux lumineux, c'est surtout l'effet thermoelectronique qui limite a temperature ambiante le domaine possible des mesures. Les electrons qui arrivent en effet a quitter la photocathode ou les dynodes donnent naissance a des groupes supplementaires d'electrons venant s'ajouter a ceux causes par effet photoelectrique. En utilisant une methode de mesure par comptage des groupes d'electrons, nous nous sommes attaches a determiner s'il etait possible a temperature ordinaire de reduire 1'influence de l'effet thermoelectronique. Pour cela, nous avons fait une etude detaillee du spectre d'amplitude des impulsions d'origine photoelectrique. Toutefois, la solution la plus efficace pour combattre l'effet thermoelectronique etant le refroidissement, nous avons essaye d'analyser l'influence de la temperature sur les caracteristiques du photomultiplicateur. Nous avons ainsi etudie en fonction de la temperature la variation du taux de comptage correspondant a l'obscurite, la variation du spectre d

Unifying the concept of consciousness across the disciplines: A concept-based, cross-cultural approach

Science.gov (United States)

Jones, Peter N.

The majority of studies concerning consciousness have examined and modeled the concept of consciousness in terms of particular lines of inquiry, a process that has circumscribed the general applicability of any results from such approaches. The purpose of this dissertation was to study consciousness from a concept-based, cross-cultural approach and to attempt to unify the concept across the cultures examined. The 4 cultures are the academic disciplines of philosophy, physics, psychology, and anthropology. Consciousness was examined in terms of how the concept is framed and where the major limitations in each line of inquiry occur. The rationale for examining consciousness as a concept across 4 cultures was to determine whether there was any common component in each line's framing that could be used to unify the concept. The study found that experience itself was the primary unifying factor in each field's framing and that experience was treated as a nonreducible property within each line of inquiry. By taking experience itself (but not subjective experience) as a fundamental property, each culture's concept of consciousness becomes tractable. As such, this dissertation argues that experience should be taken as a fundamental property of the concept. The significance of this analysis is that by taking experience as a fundamental property, it becomes possible to unify the concept across the 4 cultures. This unification is presented as a unity thesis, which is a theory arguing for unification of the concept based on the fundamental of experience. Following this theoretical examination, this paper discusses several key implications of the unity thesis, including implications of the unity thesis for the current status of altered states of consciousness and for the so-called hard and easy problems associated with the concept (at least within Occidental ontology). It is argued that the so-called hard problem does not exist when experience is taken as a fundamental property

Contribution to the development of a gamma radiation camera for use in scintigraphy; Contribution a l'etude et a la realisation d'une camera a rayonnement gamma en vue d'une application a la scintigraphie

Energy Technology Data Exchange (ETDEWEB)

Felix, J [Commissariat a l' Energie Atomique, Cadarache (France). Centre d' Etudes Nucleaires

1969-10-01

This report constitutes an attempt to study systematically the properties of the detection head of a multichannel collimating grid camera. The object has been to show the disadvantages of present equipment, and to propose possible solutions for overcoming them: firstly by improving the methods used for collecting data, and the performances of the equipment doing the collecting; secondly by devising methods for processing the data so as to reduce image distortion and, first of all, the astigmatism due to the collimator. The first part deals with the study of the formation of the image by means of the collimating grid, the second with the examination of many systems which could be used for acquiring data. The last part summarizes the experiments carried out and proposes an experimental programme for the development of a prototype. (author) [French] Ce rapport constitue une tentative d'etude systematique des proprietes de la tete de detection d'une camera a grille collimatrice multicanal. Le but de cette etude est de souligner les inconvenients des dispositifs actuels et d'esquisser des solutions propres a y remedier: premierement, par l'amelioration du mode d'acquisition des donnees et des performances du sous-ensemble charge de cette acquisition; deuxiemement, par la recherche de methodes de traitement des donnees propres a reduire les distorsions de l'image et en premier lieu l'astigmatisme du au collimateur. La premiere partie en est devolue a l'etude de la formation de l'image par l'intermediaire de la grille collimatrice, la seconde a l'examen de nombreux systemes utilisables pour l'acquisition des donnees. La derniere partie resume les experiences effectuees et propose un programme de manipulations utiles a l'elaboration d'un prototype d'appareil. (auteur)

A Co3O4-CDots-C3N4 three component electrocatalyst design concept for efficient and tunable CO2 reduction to syngas.

Science.gov (United States)

Guo, Sijie; Zhao, Siqi; Wu, Xiuqin; Li, Hao; Zhou, Yunjie; Zhu, Cheng; Yang, Nianjun; Jiang, Xin; Gao, Jin; Bai, Liang; Liu, Yang; Lifshitz, Yeshayahu; Lee, Shuit-Tong; Kang, Zhenhui

2017-11-28

Syngas, a CO and H 2 mixture mostly generated from non-renewable fossil fuels, is an essential feedstock for production of liquid fuels. Electrochemical reduction of CO 2 and H + /H 2 O is an alternative renewable route to produce syngas. Here we introduce the concept of coupling a hydrogen evolution reaction (HER) catalyst with a CDots/C 3 N 4 composite (a CO 2 reduction catalyst) to achieve a cheap, stable, selective and efficient route for tunable syngas production. Co 3 O 4 , MoS 2 , Au and Pt serve as the HER component. The Co 3 O 4 -CDots-C 3 N 4 electrocatalyst is found to be the most efficient among the combinations studied. The H 2 /CO ratio of the produced syngas is tunable from 0.07:1 to 4:1 by controlling the potential. This catalyst is highly stable for syngas generation (over 100 h) with no other products besides CO and H 2 . Insight into the mechanisms balancing between CO 2 reduction and H 2 evolution when applying the HER-CDots-C 3 N 4 catalyst concept is provided.

Mechanical design of machine components

CERN Document Server

Ugural, Ansel C

2015-01-01

Mechanical Design of Machine Components, Second Edition strikes a balance between theory and application, and prepares students for more advanced study or professional practice. It outlines the basic concepts in the design and analysis of machine elements using traditional methods, based on the principles of mechanics of materials. The text combines the theory needed to gain insight into mechanics with numerical methods in design. It presents real-world engineering applications, and reveals the link between basic mechanics and the specific design of machine components and machines. Divided into three parts, this revised text presents basic background topics, deals with failure prevention in a variety of machine elements and covers applications in design of machine components as well as entire machines. Optional sections treating special and advanced topics are also included.Key Features of the Second Edition:Incorporates material that has been completely updated with new chapters, problems, practical examples...

Advancing Uncertainty: Untangling and Discerning Related Concepts

Directory of Open Access Journals (Sweden)

Janice Penrod

2002-12-01

Full Text Available Methods of advancing concepts within the qualitative paradigm have been developed and articulated. In this section, I describe methodological perspectives of a project designed to advance the concept of uncertainty using multiple qualitative methods. Through a series of earlier studies, the concept of uncertainty arose repeatedly in varied contexts, working its way into prominence, and warranting further investigation. Processes of advanced concept analysis were used to initiate the formal investigation into the meaning of the concept. Through concept analysis, the concept was deconstructed to identify conceptual components and gaps in understanding. Using this skeletal framework of the concept identified through concept analysis, subsequent studies were carried out to add ‘flesh’ to the concept. First, a concept refinement using the literature as data was completed. Findings revealed that the current state of the concept of uncertainty failed to incorporate what was known of the lived experience. Therefore, using interview techniques as the primary data source, a phenomenological study of uncertainty among caregivers was conducted. Incorporating the findings of the phenomenology, the skeletal framework of the concept was further fleshed out using techniques of concept correction to produce a more mature conceptualization of uncertainty. In this section, I describe the flow of this qualitative project investigating the concept of uncertainty, with special emphasis on a particular threat to validity (called conceptual tunnel vision that was identified and addressed during the phases of concept correction. Though in this article I employ a study of uncertainty for illustration, limited substantive findings regarding uncertainty are presented to retain a clear focus on the methodological issues.

Pharmaceutical market access in emerging markets: concepts, components, and future.

Science.gov (United States)

Kumar, Anuj; Juluru, Karthaveerya; Thimmaraju, Phani Kishore; Reddy, Jayachandra; Patil, Anand

2014-01-01

This article intends to consolidate the concepts of pharmaceutical market access and highlight its growing importance in emerging markets. Market access has gained considerable attention worldwide as countries try to contain their escalating healthcare expenditures amidst the global economic slowdown. This has resulted in governments adopting stricter measures for new product approval. Thus, pharmaceutical companies are finding it increasingly difficult to successfully address the specific challenges posed by various government and regulatory agencies and stakeholders. There is an increasing need to establish market access functions, especially in emerging markets, where the complex, dynamic healthcare landscape confounds product approval and uptake. Moreover, emerging markets are the engines of growth today, and, thus, performing in these markets is critical for the majority of pharmaceutical companies. To address the challenges posed by regulatory agencies and diverse stakeholders, a customized market access strategy is the need of the hour. A market access framework with specific tools and tactics will help companies to plan, implement, and monitor stakeholder engagement activities.

Measuring processes with opto-electronic semiconductor components

International Nuclear Information System (INIS)

1985-01-01

This is a report on the state of commercially available semiconductor emitters and detectors for the visible, near, middle and remote infrared range. A survey is given on the distance, speed, flow and length measuring techniques using opto-electronic components. Automatic focussing, the use of light barriers, non-contact temperature measurements, spectroscopic gas, liquid and environmental measurement techniques and gas analysis in medical techniques show further applications of the new components. The modern concept of guided radiation in optical fibres and their use in system technology is briefly explained. (DG) [de

Study of copper fluorination; Contribution a l'etude de la fluoruration du cuivre

Energy Technology Data Exchange (ETDEWEB)

Gillardeau, J [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

1967-02-01

This report deals with the action of fluorine on copper. Comprehensive descriptions are given of the particular technological methods and of the preparation of the reactants. This fluorination reaction has been studied at medium and low fluorine pressures. A nucleation and growth phenomenon is described. The influence of a pollution of the gas phase on the fluorination process is described. The solid-state reaction between cupric fluoride and cooper has also been studied. A special study has been made of the growth of copper deposits by thermal decomposition of gaseous fluorides. (author) [French] Ce rapport traite de la reaction du fluor sur le cuivre. Les methodes technologiques particulieres ainsi que les preparations des reactifs sont largement developpees. Cette reaction de fluoruration est etudiee sous pressions moyennes et sous basses pressions de fluor. Un phenomene de germination et croissance est decrit. L'influence de la pollution de la phase gazeuse sur le processus de fluoruration est rapportee. La reaction a l'etat solide du fluorure cuivrique sur le cuivre a egalement ete etudiee. La croissance de depots de cuivre par decomposition thermique des fluorures de cuivre gazeux fait l'objet d'une etude speciale. (auteur)

Development of an analogue multiplexed regulation for periodic 1. order delayed processes; Etude et realisation d'une regulation analogique multiplexee pour processus aperiodiques du 1. ordre avec retard pur

Energy Technology Data Exchange (ETDEWEB)

Amblard, J.C. [Commissariat a l' Energie Atomique, Grenoble (France). Centre d' Etudes Nucleaires

1967-07-15

The present note deals with the study regulations of the sampled type, for 1. order process with simple delay. In order to obtain a good stability in such regulations, together with acceptable performances, it is interesting to use polynomial type correctors acting directly on the sampled error signals. The active elements of these correctors can be shared by all the channels to be controlled. Furthermore, the determination of the correction parameters results from an optimal study of the system. In the second part is described the construction of a multiplexed regulation for diffusion ovens. (author) [French] La presente note concerne l'etude des regulations de type echantillonne, pour processus du 1. ordre avec retard pur. Pour obtenir une bonne stabilite de telles regulations, ainsi que des performances correcte il est interessant d'utiliser des correcteurs de type polynomial, agissant directement sur les signaux d'erreur echantillonnes. Les elements actifs de ces correcteurs peuvent etre pris communs a toutes les voies a controler. D'autre part, la determination des parametres de correction decoula d'une etude optimale du systeme. Dans une seconde partie on decrit la realisation d'une regulation multiplexee de fours a diffusion. (auteur)

Contrast in concept-to-speech generation

NARCIS (Netherlands)

Theune, Mariet; Walker, M.; Rambow, O.

2002-01-01

In concept-to-speech systems, spoken output is generated on the basis of a text that has been produced by the system itself. In such systems, linguistic information from the text generation component may be exploited to achieve a higher prosodic quality of the speech output than can be obtained in a

Development of mercury porosimeter. Application to nuclear graphite studies (1961); Mise au point d'un porosimetre a mercure. Application a l'etude des graphites nucleaires (1961)

Energy Technology Data Exchange (ETDEWEB)

Bocquet, M; Genisson, J; Sailleau, J [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

1961-07-01

A mercury porosimeter, model IFP-CEA, has been developed for application to nuclear graphite studies. The apparatus is based on the capillary depression phenomenon. The relationship between the radius of a pore and the pressure at which mercury fills it is pr = -2 {sigma} cos {theta} ( {sigma} is the surface tension, {theta} the angle of contact of the mercury). After some theoretical consideration, the apparatus is described. The mercury pressure is increased step-wise from 0 to 1000 kg/cm{sup 2} thus yielding the complete distribution of pores from 92 {mu} to 75 A. Results are, then presented concerning nuclear graphites which show the evolution of the porous structure under the effect of bitumen impregnation. In general, the volume of the large pores decreases while that of the small pores increases. The structure of impregnated products appears to depend to a certain extent on that of the starting materials. It has also been possible to study other products with this porosimeter; the range of measurements possible is such that it may be used for the study of the majority of porous materials. (authors) [French] Un porosimetre a mercure modele IFP-CEA a ete mis au point en vue de son application a l'etude de graphites nucleaires. Le fonctionnement de l'appareil repose sur le phenomene de depression capillaire. On etablit la relation existant entre le rayon r d'un pore et la pression p pour laquelle le mercure peut y penetrer: pr = -2 {sigma} cos {theta} ( {sigma} tension superficielle, {theta} angle de contact du mercure). Apres quelques considerations theoriques, l'appareil utilise est decrit. Il permet de faire varier par palier la pression du mercure entre 0 et 1000 kg/cm{sup 2} et d'etablir ainsi la distribution complete des rayons de pores compris entre 92 {mu} et 75 A. Les resultats d'une etude faite sur des graphites nucleaires sont alors presentes faisant apparaitre l'evolution de la structure poreuse sous l'effet des impregnations au brai. D'une facon

Study of point defects in pure iron by means of electrical resistivity; Etude au moyen de la resistivite electrique des defauts ponctuels dans le fer pur

Energy Technology Data Exchange (ETDEWEB)

Minier-Cassayre, C [Commissariat a l' Energie Atomique, Grenoble (France). Centre d' Etudes Nucleaires

1965-04-01

In the first part of this work, after having reviewed the production, observation and the annealing of point defects In metals, we resume the present state of research. In the second part, we explain the techniques we have employed to produce point defects at low temperatures: irradiation, quenching and cold-work; and go on to the study of their migration and annealing. The experimental results obtained for pure iron and for iron containing certain impurities are presented in the third part. In the fourth part we suggest a model which explains the different stages of annealing observed, and their properties. We then compare the energies of interaction between point defects with the values deduced from the theory of elasticity. (author) [French] Dans la premiere partie de cette etude, apres avoir passe en revue la production, l'observation et les modes de guerison des defauts ponctuels dans les metaux, nous exposons l'etat actuel des recherches. La seconde partie est consacree aux techniques que nous avons employees pour produire des defauts ponctuels a basse temperature: irradiations, trempe et ecrouissage puis a l'etude de leur migration et de leur guerison. Les resultats experimentaux obtenus dans le fer pur et le fer contenant certaines impuretes sont presentes dans le troisieme chapitre. Nous proposons ensuite un modele qui explique les differents stades de guerison observes et leurs nombreuses proprietes: nous comparons les energies d'interaction entre defauts ponctuels aux valeurs que l'on pourrait deduire d'un modele elastique. (auteur)

Fatigue assessment of laserbeam welded PM steel components by the notch stress approach

Energy Technology Data Exchange (ETDEWEB)

Waterkotte, R. [Schaeffler Technologies GmbH and Co. KG, Herzogenaurach (Germany); Sonsino, C.M. [Fraunhofer Institute for Structural Durability and System Reliability LBF, Darmstadt (Germany); Baumgartner, J.

2011-10-15

The local fatigue strength of a laserbeam weld of a complex engine component, which joins a PM with a formed sheet component, was assessed by the notch stress concept with the fictitious reference radius of r{sub ref}= 0.05 mm. First, simplified specimens, following the main geometric dimensions of the parts, were manufactured. On these specimens the fatigue strength was identified by tests and the notch stresses calculated by finite element analysis. Based on these results a design SN-curve was derived to assess the fatigue strength of the engine component. The numerical assessment of the welded joint was verified by proof tests with the component. The assessment could be improved by considering statistical and stress gradient dependent size effects according to the concept of the highly stressed volume. (Copyright copyright 2011 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim)

The analysis of normative requirements to materials of PWR components, basing on LBB concepts

International Nuclear Information System (INIS)

Anikovsky, V.V.; Karzov, G.P.; Timofeev, B.T.

1997-01-01

The paper discusses the advisability of the correction of Norms to solve in terms of material science the Problem: how the normative requirements to materials must be changed in terms of the concept open-quotes leak before breakclose quotes (LBB)

The analysis of normative requirements to materials of PWR components, basing on LBB concepts

Energy Technology Data Exchange (ETDEWEB)

Anikovsky, V.V.; Karzov, G.P.; Timofeev, B.T. [CRISM Prometey, St. Petersburg (Russian Federation)

1997-04-01

The paper discusses the advisability of the correction of Norms to solve in terms of material science the Problem: how the normative requirements to materials must be changed in terms of the concept {open_quotes}leak before break{close_quotes} (LBB).

Concept - or no concept

DEFF Research Database (Denmark)

Thorsteinsson, Uffe

1999-01-01

Discussion about concept in industrial companies. A method for mapping of managerial concept in specific area is shown......Discussion about concept in industrial companies. A method for mapping of managerial concept in specific area is shown...

Study of the age of uranium-containing mineral deposits in the Limouzat, the bois-noir mountains (12963); Etude des ages des mineralisations uraniferes du gisement du Limouzat, Massif des bois-noirs (1963)

Energy Technology Data Exchange (ETDEWEB)

Durand, G [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

1963-07-01

The present work is concerned with 7 different samples taken at various levels in the Limouzat mine in the Bois-Noirs mountains. It has been possible to show that the uranium dates from 265 M.Y. and that a rearrangement occurred 65 M.Y. ago. A {gamma}-spectrometer study which was originally intended to show the existence of the lack of balance in the radon circulation, has made it possible to show that the {gamma} spectra recorded on various samples could be erroneous. We observed in effect that the presence of lead, iron, etc., had a strong influence on the {gamma} spectrum of the radium family, whereas all research workers have considered that concentrations in the uranium ore were negligible and had no significant effect on the study of the {gamma} spectra of the samples. It is obvious that an interesting study has to be undertaken on the screen effects of the different cations existing in the ores. We believe that it is possible to show the presence of certain elements directly by {gamma}-spectrometry. The ages measured with the mass spectrometer present two types of disagreement but these have been explained by considering that there occurred a first arrival of lead followed by a rearrangement and, at certain points, a second arrival at this date. Finally, the deposit studied undergoes a circulation of uranium and of radon. (author) [French] La presente etude a porte sur 7 prelevements differents effectues a divers niveaux de la mine du Limouzat, massif des Bois-Noirs. Elle a permis de mettre en evidence une premiere venue d'uranium il y a 265 M.A., suivie d'un remaniements il y a 65 M.A. Une etude au spectrometre {gamma} destinee, a l'origine, a prouver les desequilibres dus aux circulations de radon a permis de montrer que les spectres {gamma} enregistres sur divers echantillons pouvaient etre entaches d'erreurs. Nous nous sommes apercus en effet que la presence de plomb, de fer..., avait une forte influence sur le spectre {gamma} de la famille du radium

Contribution to the study of french pitchblendes; Contribution a l'etude des pechblendes francaises

Energy Technology Data Exchange (ETDEWEB)

Geffroy, J [Commissariat a l' Energie Atomique, Lab. de Mineralogie, Centre de Chatillon (France). Centre d' Etudes Nucleaires; Sarcia, J A [Commissariat a l' Energie Atomique, Div. de la Crouzille, Haute Vienne (France). Centre d' Etudes Nucleaires

1955-07-01

The authors first review the characteristics of uraninite-pitchblende, as deduced of present literature. They set apart from typical pitchblende a black oxide aspect, which probably corresponds to neo-formations, and a 'para-pitchblende' aspect, which they relate to deep sur-oxidation of normal pitchblende. They insist on the easy replacement of pitchblende by silica. and give indications as to changes in vein stones (fluorite, quartz, etc...). A detailed study of paragenesis and successions in french uranium districts follows (including discussion of uranium of uranium-bearing coals). The authors attempt to classify french pitchblende veins. They are chiefly epithermal and poor in satellite ores. Three types of deposits are identified: massive - pitchblende type, silica type, fluorite type. These deposits, as those of Portugal, are included in granite, Central-European peri-batholitic types where uranium associates which Ni, Co, Bi and Ag, are in France both rare and poor. Finally, the authors attempt to bring out in the european Hercynian area a particular distribution of paragenetic types. (authors) [French] Les auteurs recapitulent d'abord les caracteres et les occurences de l'uraninite - pechblende, tels qu'ils peuvent etre degages de l'actuelle bibliographie. Ils exposent ensuite les faits qui du point de vue mineralogique seulement ressortent de l'etude mineralogique et chalcographique des pechblendes francaises et de leurs satellites. Ils distinguent de la pechblende-type un facies oxyde noir; correspondant probablement a une neoformation, et un facies parapechblende, qui est rapporte a une sur oxydation hypogene de la pechblende proprement dite. Ils insistent sur le facile remaniement de la pechblende par la slice; et donnent quelques precisions sur les modifications des gangues (fluorine, quartz, etc...). Suit l'etude detaillee des parageneses et des successions dans les districts uraniferes francais: Divisions du Limousin, de Grury, de Lachaux et de

Conceptions of Happiness and Unhappiness among Italian Psychology Undergraduates.

Science.gov (United States)

Sotgiu, Igor

2016-01-01

The present study aims at investigating the conceptions of happiness and unhappiness in a sample of Italian psychology undergraduates. Participants completed a questionnaire asking them to report the most important things that made them feel happy (happiness components) and those ones that made them feel unhappy (unhappiness components). Different measures of overall happiness and overall unhappiness were also obtained by asking respondents to assess to what extent each reported happiness and unhappiness component was present in their life, and by inviting them to provide a global judgment about their happiness and unhappiness. Results indicated that participants did not conceptualize happiness and unhappiness as perfect antonyms. Indeed, both investigated concepts encompassed a similar set of semantic components; however, the perceived salience of some of them - assessed in terms of frequency of citation and average ranking - significantly varied between happiness and unhappiness. With regard to the measurement of overall happiness and unhappiness, on average, respondents considered themselves as moderately happy and only slightly unhappy. However, a judgmental asymmetry was found when comparing global and specific evaluations of unhappiness. Theoretical and empirical implications of the study are discussed.

Linear response at the 4-component relativistic level

DEFF Research Database (Denmark)

Saue, T.; Jensen, Hans Jørgen Aagaard

2003-01-01

The theory, implementation, and application of linear response at the 4-component relativistic closed-shell Hartree-Fock level based on the concept of quasienergy and time averaging are reported. As such, an efficient AO-driven algorithm is obtained by assigning specific Hermiticity and time...

Experimental study of contamination by inhalation of radioactive iodine aerosols. Biological balance; Etude experimentale de la contamination par inhalation d'aerosols d'iode radioactif bilan biologique

Energy Technology Data Exchange (ETDEWEB)

Marble, G. [Commissariat a l' Energie Atomique, 92 - Fontenay-aux-Roses (France). Centre d' Etudes Nucleaires

1968-07-01

Several articles have been published concerning research into contamination produced by inhalation of radioactive iodine aerosols in monkeys. Results dealing with the biological balance of this contamination are presented and discussed in this report. (author) [French] L'etude experimentale de la contamination par inhalation d'aerosols d'iode radioactif effectuee chez le singe a fait l'objet de plusieurs publications. Les resultats concernant le bilan biologique de cette contamination sont presentes et discutes dans ce rapport. (auteur)

Academic Motivation: Concepts, Strategies, and Counseling Approaches

Science.gov (United States)

Rowell, Lonnie; Hong, Eunsook

2013-01-01

Motivation is an important foundation of academic development in students. This article discusses academic motivation; its various component concepts in areas such as beliefs, goals, and values; and intrinsic and extrinsic motivation. It also presents major, widely studied theoretical perspectives of academic motivation and briefly illustrates…

Healthcare Quality: A Concept Analysis.

Science.gov (United States)

Allen-Duck, Angela; Robinson, Jennifer C; Stewart, Mary W

2017-10-01

Worsening quality indicators of health care shake public trust. Although safety and quality of care in hospitals can be improved, healthcare quality remains conceptually and operationally vague. Therefore, the aim of this analysis is to clarify the concept of healthcare quality. Walker and Avant's method of concept analysis, the most commonly used in nursing literature, provided the framework. We searched general and medical dictionaries, public domain websites, and 5 academic literature databases. Search terms included health care and quality, as well as healthcare and quality. Peer-reviewed articles and government publications published in English from 2004 to 2016 were included. Exclusion criteria were related concepts, discussions about the need for quality care, gray literature, and conference proceedings. Similar attributes were grouped into themes during analysis. Forty-two relevant articles were analyzed after excluding duplicates and those that did not meet eligibility. Following thematic analysis, 4 defining attributes were identified: (1) effective, (2) safe, (3) culture of excellence, and (4) desired outcomes. Based on these attributes, the definition of healthcare quality is the assessment and provision of effective and safe care, reflected in a culture of excellence, resulting in the attainment of optimal or desired health. This analysis proposes a conceptualization of healthcare quality that defines its implied foundational components and has potential to improve the provision of quality care. Theoretical and practice implications presented promote a fuller, more consistent understanding of the components that are necessary to improve the provision of healthcare and steady public trust. © 2017 Wiley Periodicals, Inc.

Study of new structures adapted to gas-graphite and gas-heavy water reactors; Etude de structures nouvelles adaptees aux reacteurs graphite-gaz et eau lourde-gaz

Energy Technology Data Exchange (ETDEWEB)

Martin, R; Roche, R [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

1964-07-01

'EDF d'une part, les conclusions des etudes et essais effectues hors pile d'autre part, conduisent a un changement considerable de la physionomie des reacteurs de la filiere Graphite-Gaz, Les principales modifications envisagees sont analysees dans la communication. L'adoption d'un element combustible annulaire et d'un soufflage descendant permettront d'accroitre considerablement la puissance specifique et la puissance developpee par canal; il en resultera une reduction sensible du nombre des canaux et un accroissement correlatif de la maille du reseau - L'empilement de graphite devra etre adapte a ces nouvelles conditions - Des raisons de securite conduisent a generaliser l'emploi du beton precontraint pour la construction du caisson; elles pourront amener a integrer a l'interieur de celui-ci les echangeurs et l'appareil de manutention du combustible (dispositif dit: 'en grenier'). Une maquette en vraie grandeur de ce grenier a ete construite a Saclay avec la participation d'EURATOM; les resultats d'exploitation en sont presentes, ainsi que des idees de barres de controle de conception nouvelle. En ce qui concerne la filiere Eau-Lourde-Gaz, les etudes sont poursuivies dans deux voies principales; la premiere, qui conserverait l'usage de tubes de force horizontaux, tient compte de l'experience acquise au cours de la construction du reacteur EL4 dont elle constituerait une extrapolation; la seconde, inspiree des etudes poursuivies au titre de la filiere Graphite-Gaz, ferait appel a un caisson en beton precontraint pour tenir la pression, le moderateur etant sensiblement a la pression du fluide refrigerant et le combustible etant dispose dans des canaux verticaux. Les merites respectifs de ces deux variantes sont analyses dans la communication. (auteurs)

bioWidgets: data interaction components for genomics.

Science.gov (United States)

Fischer, S; Crabtree, J; Brunk, B; Gibson, M; Overton, G C

1999-10-01

The presentation of genomics data in a perspicuous visual format is critical for its rapid interpretation and validation. Relatively few public database developers have the resources to implement sophisticated front-end user interfaces themselves. Accordingly, these developers would benefit from a reusable toolkit of user interface and data visualization components. We have designed the bioWidget toolkit as a set of JavaBean components. It includes a wide array of user interface components and defines an architecture for assembling applications. The toolkit is founded on established software engineering design patterns and principles, including componentry, Model-View-Controller, factored models and schema neutrality. As a proof of concept, we have used the bioWidget toolkit to create three extendible applications: AnnotView, BlastView and AlignView.

The prehistory of the cytoskeleton concept.

Science.gov (United States)

Zampieri, Fabio; Coen, Matteo; Gabbiani, Giulio

2014-08-01

Here we discuss how the concept and the name of cytoskeleton were generated and started to evolve over the last two centuries into what is presently a basic topic of modern biology. We also attempt to describe some facets of the emergence of cytoskeleton component characterization in which our laboratory was in part involved. © 2014 Wiley Periodicals, Inc.

Against compassion: in defence of a "hybrid" concept of empathy.

Science.gov (United States)

Morgan, Alastair

2017-07-01

In this article, I argue that the recent emphasis on compassion in healthcare practice lacks conceptual richness and clarity. In particular, I argue that it would be helpful to focus on a larger concept of empathy rather than compassion alone and that compassion should be thought of as a component of this larger concept of empathy. The first part of the article outlines a critique of the current discourse of compassion on three grounds. This discourse naturalizes, individualizes, and reifies compassion leading to a decontextualized and simplified understanding of failures in healthcare practice. The second part uses resources from phenomenology and contemporary moral philosophy to construct a "hybrid" concept of empathy that includes both pre-reflective/intuitive and cognitive/imaginative components. This "hybrid" concept of empathy leads to a more complex understanding of the multiple responses to others' distress. I conclude that there are no straightforward normative naturalistic responses to others' distress. Rather than conceptualizing compassion as a naturalistic impulse or a character-based trait, we need to consider the complexity of our empathic recognition of vulnerable others. © 2016 John Wiley & Sons Ltd.

Efficacy of the Principal Components Analysis Techniques Using ...

African Journals Online (AJOL)

Second, the paper reports results of principal components analysis after the artificial data were submitted to three commonly used procedures; scree plot, Kaiser rule, and modified Horn's parallel analysis, and demonstrate the pedagogical utility of using artificial data in teaching advanced quantitative concepts. The results ...

Etiologic theories of idiopathic scoliosis. Somatic nervous system and the NOTOM escalator concept as one component in the pathogenesis of adolescent idiopathic scoliosis.

Science.gov (United States)

Burwell, R G; Dangerfield, P H; Freeman, B J C

2008-01-01

There is no generally accepted scientific theory for the causes of adolescent idiopathic scoliosis (AIS). In recent years encouraging advances thought to be related to the pathogenesis of AIS have been made in several fields. After reviewing concepts of AIS pathogenesis we formulated a collective model of pathogenesis. The central concept of this collective model is a normal neuro-osseous timing of maturation (NOTOM) system operating in a child's internal world during growth and maturation; this provides a dynamic physiological balance of postural equilibrium continuously renewed between two synchronous, polarized processes (NOTOM escalator) linked through sensory input and motor output, namely: 1) osseous escalator-increasing skeletal size and relative segmental mass, and 2) neural escalator - including the CNS body schema. The latter is recalibrated continuously as the body adjusts to biomechanical and kinematic changes resulting from skeletal enlargement, enabling it to coordinate motor actions. We suggest that AIS progression results from abnormality of the neural and/or osseous components of these normal escalator in time and/or space - as asynchrony and/or asymmetries - which cause a failure of neural systems to control asymmetric growth of a rapidly enlarging and moving adolescent spine. This putative initiating asymmetric growth in the spine is explained in separate papers as resulting from dysfunction of the hypothalamus expressed through the sympathetic nervous system (leptin-sympathetic nervous system concept for AIS pathogenesis). In girls, the expression of AIS may result from disharmony between the somatic and autonomic nervous systems - relative postural maturational delay in the somatic nervous system and hypothalamic dysfunction in the autonomic nervous system, with the conflict being fought out in the spine and trunk of the girl and compounded by biomechanical spinal growth modulation.

Concept of control and modifying systems of accelerator components; Kontseptsiya sistem avtomatizatsii kontrolya i upravleniya

Energy Technology Data Exchange (ETDEWEB)

Gudkov, K A; Chepurnov, A S; Shumakov, A V [NNIYaF MGU, Moskva (Russian Federation)

1996-12-31

Paper considers the main trends of development of automated control and monitoring systems of accelerator components. Application of communication ring structures will enable to design highly efficient object-oriented systems of automation of research and process components. 5 refs.

[The Construction of a Mental Health Component for the National Survey: NMHS 2015, Colombia].

Science.gov (United States)

de Santacruz, Cecilia; Torres, Nubia; Gómez-Restrepo, Carlos; Matallana, Diana; Borda, Juan Pablo

2016-12-01

Usually, mental health has been defined as the absence of mental disorders. In order to approach this concept in a plain sanitas way, it was considered necessary to crosslink a component for the National Mental Health Survey 2015 (NMHS; ENSM for its acronym in Spanish), that would respond to the specific orientation and particularities of the country. To describe the structure and contents of the mental health component of the NMHS 2015 for the Colombian population over 7 years of age. Review, documentary analysis and discussion regarding the concepts and tools with the team in charge of the NMHS and other groups. 353 documents were reviewed, and 180 were analyzed and discussed. The component model is presented, considering the ethic dimension of relationship care as a main element; it merges two inquiry dimensions or categories: subjective-relational, and social-collective. The structured mental health component provides information regarding the entire population. It also allows understanding and approaching the concept of mental health as a personal and collective "good life". Copyright © 2016 Asociación Colombiana de Psiquiatría. Publicado por Elsevier España. All rights reserved.

Modelling Creativity: Identifying Key Components through a Corpus-Based Approach.

Science.gov (United States)

Jordanous, Anna; Keller, Bill

2016-01-01

Creativity is a complex, multi-faceted concept encompassing a variety of related aspects, abilities, properties and behaviours. If we wish to study creativity scientifically, then a tractable and well-articulated model of creativity is required. Such a model would be of great value to researchers investigating the nature of creativity and in particular, those concerned with the evaluation of creative practice. This paper describes a unique approach to developing a suitable model of how creative behaviour emerges that is based on the words people use to describe the concept. Using techniques from the field of statistical natural language processing, we identify a collection of fourteen key components of creativity through an analysis of a corpus of academic papers on the topic. Words are identified which appear significantly often in connection with discussions of the concept. Using a measure of lexical similarity to help cluster these words, a number of distinct themes emerge, which collectively contribute to a comprehensive and multi-perspective model of creativity. The components provide an ontology of creativity: a set of building blocks which can be used to model creative practice in a variety of domains. The components have been employed in two case studies to evaluate the creativity of computational systems and have proven useful in articulating achievements of this work and directions for further research.

Impedance of accelerator components

International Nuclear Information System (INIS)

Corlett, J.N.

1996-05-01

As demands for high luminosity and low emittance particle beams increase, an understanding of the electromagnetic interaction of these beams with their vacuum chamber environment becomes more important in order to maintain the quality of the beam. This interaction is described in terms of the wake field in time domain, and the beam impedance in frequency domain. These concepts are introduced, and related quantities such as the loss factor are presented. The broadband Q = 1 resonator impedance model is discussed. Perturbation and coaxial wire methods of measurement of real components are reviewed

From Perceptual Categories to Concepts: What Develops?

Science.gov (United States)

Sloutsky, Vladimir M.

2010-01-01

People are remarkably smart: they use language, possess complex motor skills, make non-trivial inferences, develop and use scientific theories, make laws, and adapt to complex dynamic environments. Much of this knowledge requires concepts and this paper focuses on how people acquire concepts. It is argued that conceptual development progresses from simple perceptual grouping to highly abstract scientific concepts. This proposal of conceptual development has four parts. First, it is argued that categories in the world have different structure. Second, there might be different learning systems (sub-served by different brain mechanisms) that evolved to learn categories of differing structures. Third, these systems exhibit differential maturational course, which affects how categories of different structures are learned in the course of development. And finally, an interaction of these components may result in the developmental transition from perceptual groupings to more abstract concepts. This paper reviews a large body of empirical evidence supporting this proposal. PMID:21116483

VERBAL REPRESENTATION OF THE CONCEPT OF POLITENESS AND ITS SPECIFICS IN RUSSIAN AND MODERN HEBREW

Directory of Open Access Journals (Sweden)

Pishchalnikova Vera Anatolyevna

2015-03-01

Full Text Available The authors compare the content of the universal ethic notion of politeness in Russian and Modern Hebrew on the basis of structural research of word's lexical meaning. Politeness is investigated as a basic ethic value that is included into the nucleus of ethnic culture and has certain influence on the content of ethnic worldview. The verbal representation of politeness as an ethic category differs significantly revealing the different structure and specific correlation of semantic components. The authors emphasize that national and cultural specifics of communicative behavior are defined by the different content of the concept of politeness in the communicative consciousness of the representatives of different linguocultures. In the process of communication the members of an ethnos act according to different operational understanding of the politeness assimilated during the social adaptation process. The authors underline that the notions (concepts described by the same word often differ in psychological meaning within the conceptual spheres of different nations. These different parts of ethnosspecific concepts contain significant information and national specifics of communicative behavior, and that is why they are pragmatically relevant. The research of the specifics of politeness concept meaning is a theoretical and pragmatic topic of current importance. The authors describe the first stage of politeness concept modelling based on lexicographic data. By comparing the components of concepts' meaning, that are denominated by comparable words in Russian and Jewish linguocultures, the authors prove the stability of concept's structure as a specific mental unit. The structural and semantic models of ъебйга and вежливость contain discreet components of meaning that are opposed gradually. The authors believe that this could be the indication of certain universal types of relations between word's meaning components.

Reconstruction de la surface de Fermi dans l'etat normal d'un supraconducteur a haute Tc: Une etude du transport electrique en champ magnetique intense

Science.gov (United States)

Le Boeuf, David

Des mesures de resistance longitudinale et de resistance de Hall en champ magnetique intense transverse (perpendiculaire aux plans CuO2) ont ete effectuees au sein de monocristaux de YBa2Cu3Oy (YBCO) demacles, ordonnes et de grande purete, afin d'etudier l'etat fondamental des supraconducteurs a haute Tc dans le regime sous-dope. Cette etude a ete realisee en fonction du dopage et de l'orientation du courant d'excitation J par rapport a l'axe orthorhombique b de la structure cristalline. Les mesures en champ magnetique intense revelent par suppression de la supraconductivite des oscillations magnetiques des resistances longitudinale et de Hall dans YBa2Cu 3O6.51 et YBa2Cu4O8. La conformite du comportement de ces oscillations quantiques au formalisme de Lifshitz-Kosevich, apporte la preuve de l'existence d'une surface de Fermi fermee a caractere quasi-2D, abritant des quasiparticules coherentes respectant la statistique de Fermi-Dirac, dans la phase pseudogap d'YBCO. La faible frequence des oscillations quantiques, combinee avec l'etude de la partie monotone de la resistance de Hall en fonction de la temperature indique que la surface de Fermi d'YBCO sous-dope comprend une petite poche de Fermi occupee par des porteurs de charge negative. Cette particularite de la surface de Fermi dans le regime sous-dope incompatible avec les calculs de structure de bande est en fort contraste avec la structure electronique presente dans le regime surdope. Cette observation implique ainsi l'existence d'un point critique quantique dans le diagramme de phase d'YBCO, au voisinage duquel la surface de Fermi doit subir une reconstruction induite par l'etablissement d'une brisure de la symetrie de translation du reseau cristallin sous-jacent. Enfin, l'etude en fonction du dopage de la resistance de Hall et de la resistance longitudinale en champ magnetique intense suggere qu'un ordre du type onde de densite (DW) est responsable de la reconstruction de la surface de Fermi. L'analogie de

An explication of the Graphite Structural Design Code of core components for the High Temperature Engineering Test Reactor

International Nuclear Information System (INIS)

Iyoku, Tatsuo; Ishihara, Masahiro; Toyota, Junji; Shiozawa, Shusaku

1991-05-01

The integrity evaluation of the core graphite components for the High Temperature Engineering Test Reactor (HTTR) will be carried out based upon the Graphite Structural Design Code for core components. In the application of this design code, it is necessary to make clear the basic concept to evaluate the integrity of core components of HTTR. Therefore, considering the detailed design of core graphite structures such as fuel graphite blocks, etc. of HTTR, this report explicates the design code in detail about the concepts of stress and fatigue limits, integrity evaluation method of oxidized graphite components and thermal irradiation stress analysis method etc. (author)

Content Analysis of the Concept of Addiction in High School Textbooks of Iran.

Science.gov (United States)

Mirzamohammadi, Mohammad Hasan; Mousavi, Sayedeh Zainab; Massah, Omid; Farhoudian, Ali

2017-01-01

This research sought to determine how well the causes of addiction, addiction harms, and prevention of addiction have been noticed in high school textbooks. We used descriptive method to select the main related components of the addiction concept and content analysis method for analyzing the content of textbooks. The study population comprised 61 secondary school curriculum textbooks and study sample consisted of 14 secondary school textbooks selected by purposeful sampling method. The tools for collecting data were "content analysis inventory" which its validity was confirmed by educational and social sciences experts and its reliability has been found to be 91%. About 67 components were prepared for content analysis and were divided to 3 categories of causes, harms, and prevention of addiction. The analysis units in this study comprised phrases, topics, examples, course topics, words, poems, images, questions, tables, and exercises. Results of the study showed that the components of the addiction concept have presented with 212 remarks in the textbooks. Also, the degree of attention given to any of the 3 main components of the addiction concept were presented as follows: causes with 52 (24.52%) remarks, harm with 89 (41.98%) remarks, and prevention with 71 (33.49%) remarks. In high school textbooks, little attention has been paid to the concept of addiction and mostly its biological dimension were addressed while social, personal, familial, and religious dimensions of addiction have been neglected.

High-level Component Interfaces for Collaborative Development: A Proposal

Directory of Open Access Journals (Sweden)

Thomas Marlowe

2009-12-01

Full Text Available Software development has rapidly moved toward collaborative development models where multiple partners collaborate in creating and evolving software intensive systems or components of sophisticated ubiquitous socio-technical-ecosystems. In this paper we extend the concept of software interface to a flexible high-level interface as means for accommodating change and localizing, controlling and managing the exchange of knowledge and functional, behavioral, quality, project and business related information between the partners and between the developed components.

Alignment of the Stanford Linear Collider Arcs: Concepts and results

International Nuclear Information System (INIS)

Pitthan, R.; Bell, B.; Friedsam, H.; Pietryka, M.; Oren, W.; Ruland, R.

1987-02-01

The alignment of the Arcs for the Stanford Linear Collider at SLAC has posed problems in accelerator survey and alignment not encountered before. These problems come less from the tight tolerances of 0.1 mm, although reaching such a tight statistically defined accuracy in a controlled manner is difficult enough, but from the absence of a common reference plane for the Arcs. Traditional circular accelerators, including HERA and LEP, have been designed in one plane referenced to local gravity. For the SLC Arcs no such single plane exists. Methods and concepts developed to solve these and other problems, connected with the unique design of SLC, range from the first use of satellites for accelerator alignment, use of electronic laser theodolites for placement of components, computer control of the manual adjustment process, complete automation of the data flow incorporating the most advanced concepts of geodesy, strict separation of survey and alignment, to linear principal component analysis for the final statistical smoothing of the mechanical components

Study of the machining of uranium carbide rods obtained by continuous casting under electronic bombardment; Etude de l'usinage de barreaux de carbure d'uranium obtenus par coulee continue sous bombardement electronique

Energy Technology Data Exchange (ETDEWEB)

Rousset, P.; Accary, A. [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

1965-07-01

The authors consider the various methods of machining uranium mono-carbide and compare them critically in the case of their application to uranium carbide obtained by fusion under an electronic bombardment and continuous casting. This study leads them to propose two mechanical machining methods: cylindrical rectification and center-less rectification, preceded by a preliminary roughing out of a cylinder, the latter appearing more suitable. A study of the machining yields as a function of the diameter of the rough bars and of the diameter of the finished rods has shown that an optimum value of the rough bar diameter exists for each value of the finished rod diameter. It is found that the yield increases as the diameter itself increases, this yield rising from 45 per cent to around 70 per cent as the diameter of the rough bars increases from 25-26 mm to 37-38 mm. (authors) [French] Les auteurs envisagent les differentes methodes d'usinage du monocarbure d'uranium et se livrent a une etude critique de celles-ci, dans le cas de leur application a l'usinage de barreaux de carbure d'uranium obtenus par fusion sous bombardement electronique et coulee continue. Cette etude les conduit a proposer deux methodes d'usinage mecanique: la rectification cylindrique et la rectification 'centerless', precedee d'un ebauchage par carottage, la seconde paraissant la plus appropriee. L'etude des rendements d'usinage en fonction du diametre des barreaux bruts et du diametre des barreaux finis, a mis en evidence une valeur optimale du diametre des barreaux bruts pour chaque valeur du diametre des barreaux usines. Elle a montre que le rendement croit lorsque le diametre croit lui-meme, ce rendement passant d'environ 45 pour cent a environ 70 pour cent, lorsque le diametre des barreaux bruts passe de 25-26 mm a 37-38 mm.

Application of the Moessbauer effect to the study of the structure of transition metal complexes; Applications de l'effet Mossbauer a l'etude de la structure des complexes des metaux de transition

Energy Technology Data Exchange (ETDEWEB)

Tsymbal, C [Commissariat a l' Energie Atomique, Grenoble (France). Centre d' Etudes Nucleaires

1968-07-01

In this survey, the structural investigations of transition metal complexes by the hyperfine interactions in the Moessbauer effect are described. The isomer shift provides a unique tool for estimating s electrons covalency in high spin complexes and one of the best pieces of evidence for the importance of bacle donation in low spin complexes. The electric field gradient deriving from quadrupole coupling measurements is correlated with the energy levels distribution of d orbitals in high spin complexes, whereas in low spin complexes it originates from the unbalanced d electrons. (authors) [French] Dans cette etude, nous decrivons les applications des interactions hyperfines dans l' effet Mossbauer a l'etude de la structure des complexes des metaux de transition. Le deplacement isomerique donne des informations tres utiles sur la covalence des electrons s dans les complexes a spin eleve et met en evidence d'une maniere nette l'importance du phenomene de 'bacle donation' dans les complexes a spin faible. Le gradient de champ electrique qui provient des mesures d'interaction quadripolaire est lie a la distribution des niveaux d'energie des orbitales d dans les complexes a spin eleve alors que dans les complexes a spin faible, il est provoque par des electrons d non apparies. (auteurs)

'Who Thinks Abstractly?': Quantum Theory and the Architecture of Physical Concepts

International Nuclear Information System (INIS)

Plotnitsky, Arkady

2011-01-01

Beginning with its introduction by W. Heisenberg, quantum mechanics was often seen as an overly abstract theory, mathematically and physically, vis-a-vis classical physics or relativity. This perception was amplified by the fact that, while the quantum-mechanical formalism provided effective predictive algorithms for the probabilistic predictions concerning quantum experiments, it appeared unable to describe, even by way idealization, quantum processes themselves in space and time, in the way classical mechanics or relativity did. The aim of the present paper is to reconsider the nature of mathematical and physical abstraction in modern physics by offering an analysis of the concept of ''physical fact'' and of the concept of 'physical concept', in part by following G. W. F. Hegel's and G. Deleuze's arguments concerning the nature of conceptual thinking. In classical physics, relativity, and quantum physics alike, I argue, physical concepts are defined by the following main features - 1) their multi-component multiplicity; 2) their essential relations to problems; 3) and the interactions between physical, mathematical, and philosophical components within each concept. It is the particular character of these interactions in quantum mechanics, as defined by its essentially predictive (rather than descriptive) nature, that distinguishes it from classical physics and relativity.

A statistical analysis of electrical cerebral activity; Contribution a l'etude de l'analyse statistique de l'activite electrique cerebrale

Energy Technology Data Exchange (ETDEWEB)

Bassant, Marie-Helene

1971-01-15

The aim of this work was to study the statistical properties of the amplitude of the electroencephalographic signal. The experimental method is described (implantation of electrodes, acquisition and treatment of data). The program of the mathematical analysis is given (calculation of probability density functions, study of stationarity) and the validity of the tests discussed. The results concerned ten rabbits. Trips of EEG were sampled during 40 s. with very short intervals (500 μs). The probability density functions established for different brain structures (especially the dorsal hippocampus) and areas, were compared during sleep, arousal and visual stimulus. Using a Χ{sup 2} test, it was found that the Gaussian distribution assumption was rejected in 96.7 per cent of the cases. For a given physiological state, there was no mathematical reason to reject the assumption of stationarity (in 96 per cent of the cases). (author) [French] Le but de ce travail est d'etudier les proprietes statistiques des amplitudes du signal electroencephalographique. La methode experimentale est decrite (implantation d'electrodes, acquisition et traitement des donnees). Le programme d'analyse mathematique est precise (calcul des courbes de repartition statistique, etude de la stationnarite du signal) et la validite des tests, discutee. Les resultats de l'etude portent sur 10 lapins. Des sequences de 40 s d'EEG sont echantillonnees. La valeur de la tension est prelevee a un pas d'echantillonnage de 500 μs. Les courbes de repartition statistiques sont comparees d'une region de l'encephale a l'autre (l'hippocampe dorsal a ete specialement analyse) ceci pendant le sommeil, l'eveil et des stimulations visuelles. Le test du Χ{sup 2} rejette l'hypothese de distribution normale dans 97 pour cent des cas. Pour un etat physiologique donne, il n'existe pas de raison mathematique a ce que soit repoussee l'hypothese de stationnarite, ceci dans 96.7 pour cent des cas. (auteur)

What characterises a useful concept of causation in epidemiology?

DEFF Research Database (Denmark)

Olsen, Jørn

2003-01-01

, interpret and communicate our results. The component-cause model has considerably more to offer than a simple probabilistic concept. What a causal model has to offer to the advancement of the discipline is equally important as the concept itself. It has been said that we should not hunt “the Holy Grail......” (that is, determinism), if it does not exist. This line of reasoning neglects the fact that the “hunting” is more important than the “finding”....

Resiliency as a component importance measure in network reliability

International Nuclear Information System (INIS)

Whitson, John C.; Ramirez-Marquez, Jose Emmanuel

2009-01-01

This paper seeks to define the concept of resiliency as a component importance measure related to network reliability. Resiliency can be defined as a composite of: (1) the ability of a network to provide service despite external failures and (2) the time to restore service when in the presence of such failures. Although, Resiliency has been extensively studied in different research areas, this paper will study the specific aspects of quantifiable network resiliency when the network is experiencing potential catastrophic failures from external events and/or influences, and when it is not known a priori which specific components within the network will fail. A formal definition for Category I resiliency is proposed and a step-by-step approach based on Monte-Carlo simulation to calculate it is defined. To illustrate the approach, two-terminal networks with varying degrees of redundancy, have been considered. The results obtained for test networks show that this new quantifiable concept of resiliency provides insight into the performance and topology of the network. Future use for this work could include methods for safeguarding critical network components and optimizing the use of redundancy as a technique to improve network resiliency.

Dosimeter calibration facilities and methods at the Radiation Measurement Laboratory of the Centre d'etudes nucleaires, Grenoble

International Nuclear Information System (INIS)

Choudens, H. de; Herbaut, Y.; Haddad, A.; Giroux, J.; Rouillon, J.; CEA Centre d'Etudes Nucleaires de Grenoble, 38

1975-01-01

At the Centre d'etudes nucleaires, Grenoble, the Radiation Measurement Laboratory, which forms part of the Environmental Protection and Research Department, serves the entire Centre for purposes of dosimetry and the calibration of dose meters. The needs of radiation protection are such that one must have facilities for checking periodically the calibration of radiation-monitoring instruments and developing special dosimetry techniques. It was thought a good idea to arrange for the dosimetry and radiation protection team to assist other groups working at the Centre - in particular, the staff of the biology and radiobiology laboratories - and also bodies outside the framework of the French Commissariat a l'energie atomique. Thus, technical collaboration has been established with, for example, Grenoble's Centre hospitalier universitaire (university clinic), which makes use of the facilities and skills available at the Radiation Measurement Laboratory for solving special dosimetry problems. With the Laboratory's facilities it is possible to calibrate dose meters for gamma, beta and neutron measurements

Autobiographically significant concepts: more episodic than semantic in nature? An electrophysiological investigation of overlapping types of memory.

Science.gov (United States)

Renoult, Louis; Davidson, Patrick S R; Schmitz, Erika; Park, Lillian; Campbell, Kenneth; Moscovitch, Morris; Levine, Brian

2015-01-01

A common assertion is that semantic memory emerges from episodic memory, shedding the distinctive contexts associated with episodes over time and/or repeated instances. Some semantic concepts, however, may retain their episodic origins or acquire episodic information during life experiences. The current study examined this hypothesis by investigating the ERP correlates of autobiographically significant (AS) concepts, that is, semantic concepts that are associated with vivid episodic memories. We inferred the contribution of semantic and episodic memory to AS concepts using the amplitudes of the N400 and late positive component, respectively. We compared famous names that easily brought to mind episodic memories (high AS names) against equally famous names that did not bring such recollections to mind (low AS names) on a semantic task (fame judgment) and an episodic task (recognition memory). Compared with low AS names, high AS names were associated with increased amplitude of the late positive component in both tasks. Moreover, in the recognition task, this effect of AS was highly correlated with recognition confidence. In contrast, the N400 component did not differentiate the high versus low AS names but, instead, was related to the amount of general knowledge participants had regarding each name. These results suggest that semantic concepts high in AS, such as famous names, have an episodic component and are associated with similar brain processes to those that are engaged by episodic memory. Studying AS concepts may provide unique insights into how episodic and semantic memory interact.

Study of the antithyroid and radioprotective properties of compounds of the 5 thione imidazolidines group; Etude des proprietes antithyroidiennes et radioprotectrices de composes de la famille des 5 thione imidazolidines

Energy Technology Data Exchange (ETDEWEB)

Rinaldi, R; Bernard, Y [Commissariat a l' Energie Atomique, Grenoble (France).Centre d' Etudes Nucleaires

1961-07-01

Some compounds of the 5 thione imidazolidines group were synthesized by conventional or original methods, and this study is aimed at defining certain pharmacodynamic properties which these substances may be expected to show on the basis of their structure. The properties looked for are: - antithyroid activity, by studying the difference in iodine 131 fixation by the thyroid of rats previously treated or not with these materials; - radioprotective activity, by the comparative study of percentage survival; after 30 days, of mice subjected to a lethal dose of X radiation and having received or not, before irradiation, an intraperitoneal injection of the product under investigation. (author) [French] La synthese de quelques composes de la famille des 5 thione imidazolidines a ete realisee par des methodes classiques ou originales, et le but de ce travail est d'essayer de preciser certaines proprietes pharmacodynamiques que la structure de ces substances peut laisser prevoir. Les proprietes recherchees sont: - l'activite antithyroidienne par l'etude de la difference de la fixation de l'iode 131 par la thyroide de rats prealablement traites ou non par ces produits; - l'activite radioprotectrice par l'etude comparative du pourcentage de survie a 30 jours chez des souris soumises a une dose lethale de rayonnement X, et ayant recu ou non, avant irradiation une injection intraperitoneale du produit a etudier. (auteur)

Disruption problematics in segmented blanket concepts

International Nuclear Information System (INIS)

Crutzen, Y.; Fantechi, S.; Farfaletti-Casali, F.

1994-01-01

In Tokamaks, the hostile operating environment originated by plasma disruption events requires that the first wall/blanket/shield components sustain the large induced electromagnetic (EM) forces without significant structural deformation and within allowable material stresses. As a consequence there is a need to improve the safety features of the blanket design concepts satisfying the disruption problematics and to formulate guidelines on the required internal reinforcements of the blanket components. The present paper describes the recent investigations on blanket reinforcement systems needed in order to optimize the first-wall/blanket/shield structural design for next step and commercial fusion reactors in the context of ITER, DEMO and SEAFP activities

Deep Space Habitat Concept Demonstrator

Science.gov (United States)

Bookout, Paul S.; Smitherman, David

2015-01-01

This project will develop, integrate, test, and evaluate Habitation Systems that will be utilized as technology testbeds and will advance NASA's understanding of alternative deep space mission architectures, requirements, and operations concepts. Rapid prototyping and existing hardware will be utilized to develop full-scale habitat demonstrators. FY 2014 focused on the development of a large volume Space Launch System (SLS) class habitat (Skylab Gen 2) based on the SLS hydrogen tank components. Similar to the original Skylab, a tank section of the SLS rocket can be outfitted with a deep space habitat configuration and launched as a payload on an SLS rocket. This concept can be used to support extended stay at the Lunar Distant Retrograde Orbit to support the Asteroid Retrieval Mission and provide a habitat suitable for human missions to Mars.

Stitch the niche - a practical philosophy and visual schematic for the niche concept

NARCIS (Netherlands)

McInerny, Greg J.; Etienne, Rampal S.

2012-01-01

By over-focusing on precise definitions, ecology has produced a confused idea of the niche concept. This, our second paper, develops a practical philosophy for the niche that approaches the concept at the correct level of abstraction. We deconstruct the niche into effect and response components and

Operation safety of complex industrial systems. Main concepts

International Nuclear Information System (INIS)

Zwingelstein, G.

2009-01-01

Operation safety consists in knowing, evaluating, foreseeing, measuring and mastering the technological system and human failures in order to avoid their impacts on health and people's safety, on productivity, and on the environment, and to preserve the Earth's resources. This article recalls the main concepts of operation safety: 1 - evolutions in the domain; 2 - failures, missions and functions of a system and of its components: functional failure, missions and functions, industrial processes, notions of probability; 3 - basic concepts and operation safety: reliability, unreliability, failure density, failure rate, relations between them, availability, maintainability, safety. (J.S.)

Analysis Method for Integrating Components of Product

Energy Technology Data Exchange (ETDEWEB)

Choi, Jun Ho [Inzest Co. Ltd, Seoul (Korea, Republic of); Lee, Kun Sang [Kookmin Univ., Seoul (Korea, Republic of)

2017-04-15

This paper presents some of the methods used to incorporate the parts constituting a product. A new relation function concept and its structure are introduced to analyze the relationships of component parts. This relation function has three types of information, which can be used to establish a relation function structure. The relation function structure of the analysis criteria was established to analyze and present the data. The priority components determined by the analysis criteria can be integrated. The analysis criteria were divided based on their number and orientation, as well as their direct or indirect characteristic feature. This paper presents a design algorithm for component integration. This algorithm was applied to actual products, and the components inside the product were integrated. Therefore, the proposed algorithm was used to conduct research to improve the brake discs for bicycles. As a result, an improved product similar to the related function structure was actually created.

Analysis Method for Integrating Components of Product

International Nuclear Information System (INIS)

Choi, Jun Ho; Lee, Kun Sang

2017-01-01

This paper presents some of the methods used to incorporate the parts constituting a product. A new relation function concept and its structure are introduced to analyze the relationships of component parts. This relation function has three types of information, which can be used to establish a relation function structure. The relation function structure of the analysis criteria was established to analyze and present the data. The priority components determined by the analysis criteria can be integrated. The analysis criteria were divided based on their number and orientation, as well as their direct or indirect characteristic feature. This paper presents a design algorithm for component integration. This algorithm was applied to actual products, and the components inside the product were integrated. Therefore, the proposed algorithm was used to conduct research to improve the brake discs for bicycles. As a result, an improved product similar to the related function structure was actually created.

The effects of attachment components on formal-operational thinking

Directory of Open Access Journals (Sweden)

Vukčević Branimir

2010-01-01

Full Text Available In this work our aim is to examine how the components of attachment influence the thinking development of adolescents in familial context. We investigated the components of attachment: unresolved family traumatisation, the use of external security base, fear of loss of external security base, negative self concept, negative other concept, capacity for mentalisation, low control of anger. We used a revised Questionnaire for Assessment of Adult and Adolescent Attachment (in original: UPIPAV-R. Formal operations were tested by Bond's Logical Operations Test. We examined the cultural-pedagogical status of the family, the parental mediation characteristic for the development of formal operations, and family property as the aspects of familial context. The sample consisted of 200 pupils aged 14 to 19. According to the attachment theory, secure attachment provides the feel of security in environment exploration, which is the ground of personality development. We assumed that components of attachment contribute formal-operational thinking development and change the influence of familial cultural-supportive tools. The findings show us that the culturalpedagogical status of the family improves formal operations development and unresolved family traumatisation has negative influence. Capacity for mentalisation has a positive indirect effect on thinking development through the influence of the cultural-pedagogical status of the family. The low control of anger has a negative indirect effect on thinking development; it increases the influence of unresolved family traumatisation. Negative self concept has indirect effects on thinking development through increasing this negative influence of unresolved family traumatisation and decreasing the role of familial cultural-supportive tools.

New fast reactor installation concept

International Nuclear Information System (INIS)

Anon.

1976-01-01

The large size and complexity of fast reactor installations are emphasised and these difficulties will be increased with the advent of fast reactors of higher power. In this connection a new concept of fast reactor installation is described with a view to reducing the size of the installation and enabling most components, including even the primary vessel, to be constructed within the confines of a workshop. Full constructional details are given. (U.K.)

Realisation and tests of a compressed gas Cherenkov counter. Study of the pollution of a beam (1961); Realisation et essais d'un compteur cherenkov a gaz comprime etude de la pollution d'un faisceau (1961)

Energy Technology Data Exchange (ETDEWEB)

Duboc, J; Banaigs, J; Detoeuf, J F [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

1961-07-01

The realisation of a compressed as Cherenkov counter permits the study of the pollution of a beam of {pi} mesons with momentum varying from 220 to 11000 MeV/c. (authors) [French] La realisation d'un compteur Cherenkov a gaz sous pression permet l'etude de la pollution d'un faisceau de mesons {pi} d'impulsions comprise entre 220 et 1100 MeV/c. (auteurs)

Contribution to the study of french pitchblendes; Contribution a l'etude des pechblendes francaises

Energy Technology Data Exchange (ETDEWEB)

Geffroy, J. [Commissariat a l' Energie Atomique, Lab. de Mineralogie, Centre de Chatillon (France). Centre d' Etudes Nucleaires; Sarcia, J.A. [Commissariat a l' Energie Atomique, Div. de la Crouzille, Haute Vienne (France). Centre d' Etudes Nucleaires

1955-07-01

The authors first review the characteristics of uraninite-pitchblende, as deduced of present literature. They set apart from typical pitchblende a black oxide aspect, which probably corresponds to neo-formations, and a 'para-pitchblende' aspect, which they relate to deep sur-oxidation of normal pitchblende. They insist on the easy replacement of pitchblende by silica. and give indications as to changes in vein stones (fluorite, quartz, etc...). A detailed study of paragenesis and successions in french uranium districts follows (including discussion of uranium of uranium-bearing coals). The authors attempt to classify french pitchblende veins. They are chiefly epithermal and poor in satellite ores. Three types of deposits are identified: massive - pitchblende type, silica type, fluorite type. These deposits, as those of Portugal, are included in granite, Central-European peri-batholitic types where uranium associates which Ni, Co, Bi and Ag, are in France both rare and poor. Finally, the authors attempt to bring out in the european Hercynian area a particular distribution of paragenetic types. (authors) [French] Les auteurs recapitulent d'abord les caracteres et les occurences de l'uraninite - pechblende, tels qu'ils peuvent etre degages de l'actuelle bibliographie. Ils exposent ensuite les faits qui du point de vue mineralogique seulement ressortent de l'etude mineralogique et chalcographique des pechblendes francaises et de leurs satellites. Ils distinguent de la pechblende-type un facies oxyde noir; correspondant probablement a une neoformation, et un facies parapechblende, qui est rapporte a une sur oxydation hypogene de la pechblende proprement dite. Ils insistent sur le facile remaniement de la pechblende par la slice; et donnent quelques precisions sur les modifications des gangues (fluorine, quartz, etc...). Suit l'etude detaillee des parageneses et des successions dans les districts uraniferes francais: Divisions du

Reliability estimation for check valves and other components

International Nuclear Information System (INIS)

McElhaney, K.L.; Staunton, R.H.

1996-01-01

For years the nuclear industry has depended upon component operational reliability information compiled from reliability handbooks and other generic sources as well as private databases generated by recognized experts both within and outside the nuclear industry. Regrettably, these technical bases lacked the benefit of large-scale operational data and comprehensive data verification, and did not take into account the parameters and combinations of parameters that affect the determination of failure rates. This paper briefly examines the historic use of generic component reliability data, its sources, and its limitations. The concept of using a single failure rate for a particular component type is also examined. Particular emphasis is placed on check valves due to the information available on those components. The Appendix presents some of the results of the extensive analyses done by Oak Ridge National Laboratory (ORNL) on check valve performance

Composing simulations using persistent software components

Energy Technology Data Exchange (ETDEWEB)

Holland, J.V.; Michelsen, R.E.; Powell, D.R.; Upton, S.C.; Thompson, D.R.

1999-03-01

The traditional process for developing large-scale simulations is cumbersome, time consuming, costly, and in some cases, inadequate. The topics of software components and component-based software engineering are being explored by software professionals in academic and industrial settings. A component is a well-delineated, relatively independent, and replaceable part of a software system that performs a specific function. Many researchers have addressed the potential to derive a component-based approach to simulations in general, and a few have focused on military simulations in particular. In a component-based approach, functional or logical blocks of the simulation entities are represented as coherent collections of components satisfying explicitly defined interface requirements. A simulation is a top-level aggregate comprised of a collection of components that interact with each other in the context of a simulated environment. A component may represent a simulation artifact, an agent, or any entity that can generated events affecting itself, other simulated entities, or the state of the system. The component-based approach promotes code reuse, contributes to reducing time spent validating or verifying models, and promises to reduce the cost of development while still delivering tailored simulations specific to analysis questions. The Integrated Virtual Environment for Simulation (IVES) is a composition-centered framework to achieve this potential. IVES is a Java implementation of simulation composition concepts developed at Los Alamos National Laboratory for use in several application domains. In this paper, its use in the military domain is demonstrated via the simulation of dismounted infantry in an urban environment.

Concept design on RH maintenance of CFETR Tokamak reactor

International Nuclear Information System (INIS)

Song, Yuntao; Wu, Songtao; Wan, Yuanxi; Li, Jiangang; Ye, Minyou; Zheng, Jinxing; Cheng, Yong; Zhao, Wenlong; Wei, Jianghua

2014-01-01

Highlights: •We discussed the concept design of the RH maintenance system based on the main design work of the key components for CFETR. •The main design work for RH maintenance in this paper was carried out including the divertor RH system, the blanket RH system and the transfer cask system. •The technical problems encountered in the design process were discussed. •The present concept design of remote maintenance system in this paper can meet the physical and engineering requirement of CFETR. -- Abstract: CFETR which stands for Chinese Fusion Engineering Testing Reactor is a superconducting Tokamak device. The concept design on RH maintenance of CFETR has been done in the past year. It is known that, the RH maintenance is one of the most important parts for Tokamak reactor. The fusion power was designed as 50–200 MW and its duty cycle time (or burning time) was estimated as 30–50%. The center magnetic field strength on the TF magnet is 5.0 T, the maximum capacity of the volt seconds provided by center solenoid winding will be about 160 VS. The plasma current will be 10 MA and its major radius and minor radius is 5.7 m and 1.6 m respectively. All the components of CFETR which provide their basic functions must be maintained and inspected during the reactor lifetime. Thus, the remote handling (RH) maintenance system should be a key component, which must be detailedly designed during the concept design processing of CFETR, for the operation of reactor. The main design work for RH maintenance in this paper was carried out including the divertor RH system, the blanket RH system and the transfer cask system. What is more, the technical problems encountered in the design process will also be discussed

Empirical classification of resources in a business model concept

Directory of Open Access Journals (Sweden)

Marko Seppänen

2009-04-01

Full Text Available The concept of the business model has been designed for aiding exploitation of the business potential of an innovation. This exploitation inevitably involves new activities in the organisational context and generates a need to select and arrange the resources of the firm in these new activities. A business model encompasses those resources that a firm has access to and aids in a firm’s effort to create a superior ‘innovation capability’. Selecting and arranging resources to utilise innovations requires resource allocation decisions on multiple fronts as well as poses significant challenges for management of innovations. Although current business model conceptualisations elucidate resources, explicit considerations for the composition and the structures of the resource compositions have remained ambiguous. As a result, current business model conceptualisations fail in their core purpose in assisting the decision-making that must consider the resource allocation in exploiting business opportunities. This paper contributes to the existing discussion regarding the representation of resources as components in the business model concept. The categorized list of resources in business models is validated empirically, using two samples of managers in different positions in several industries. The results indicate that most of the theoretically derived resource items have their equivalents in the business language and concepts used by managers. Thus, the categorisation of the resource components enables further development of the business model concept as well as improves daily communication between managers and their subordinates. Future research could be targeted on linking these components of a business model with each other in order to gain a model to assess the performance of different business model configurations. Furthermore, different applications for the developed resource configuration may be envisioned.

Artistic quality in an opera company : toward the development of a concept

OpenAIRE

Boerner, Sabine

2004-01-01

This article elaborates a first concept for defining artistic quality in a nonprofit professional opera company. To specify the artistic quality of an opera company, we identify two components: profile quality and performance quality. The article discusses the limitations of this preliminary concept and considerations for further research on artistic quality in an opera company.

Light and Redox Switchable Molecular Components for Molecular Electronics

NARCIS (Netherlands)

Browne, Wesley R.; Feringa, Bernard

2010-01-01

The field of molecular and organic electronics has seen rapid progress in recent years, developing from concept and design to actual demonstration devices in which both single molecules and self-assembled monolayers are employed as light-responsive components. Research in this field has seen

Etudes optiques de nouveaux materiaux laser: Des orthosilicates dopes a l'ytterbium: Le yttrium (lutetium,scandium) pentoxide de silicium

Science.gov (United States)

Denoyer, Aurelie

La decouverte et l'elaboration de nouveaux materiaux laser solides suscitent beaucoup d'interet parmi la communaute scientifique. En particulier les lasers dans la gamme de frequence du micron debouchent sur beaucoup d'applications, en telecommunication, en medecine, dans le domaine militaire, pour la, decoupe des metaux (lasers de puissance), en optique non lineaire (doublage de frequence, bistabilite optique). Le plus couramment utilise actuellement est le Nd:YAG dans cette famille de laser, mais des remplacants plus performants sont toujours recherches. Les lasers a base d'Yb3+ possedent beaucoup d'avantages compares aux lasers Nd3+ du fait de leur structure electronique simple et de leur deterioration moins rapide. Parmi les matrices cristallines pouvant accueillir l'ytterbium, les orthosilicates Yb:Y 2SiO5, Yb:Lu2SiO5 et Yb:Sc2SiO 5 se positionnent tres bien, du fait de leur bonne conductivite thermique et du fort eclatement de leur champ cristallin necessaire a l'elaboration de lasers quasi-3 niveaux. De plus l'etude fine et systematique des proprietes microscopiques de nouveaux materiaux s'avere toujours tres interessante du point de vue de la recherche fondamentale, c'est ainsi que de nouveaux modeles sont concus (par exemple pour le champ cristallin) ou que de nouvelles proprietes inhabituelles sont decouvertes, menant a de nouvelles applications. Ainsi d'autres materiaux dopes a l'ytterbium sont connus pour leurs proprietes de couplage electron-phonon, de couplage magnetique, d'emission cooperative ou encore de bistabilite optique, mais ces proprietes n'ont encore jamais ete mises en evidence dans Yb:Y 2SiO5, Yb:Lu2SiO5 et Yb:Sc2SiO 5. Ainsi, cette these a pour but l'etude des proprietes optiques et des interactions microscopiques dans Yb:Y2SiO 5, Yb:Lu2SiO5 et Yb:Sc2SiO5. Nous utilisons principalement les techniques d'absorption IR et de spectroscopie Raman pour determiner les excitations du champ cristallin et les modes de vibration dans le materiau

Holistic Nursing Simulation: A Concept Analysis.

Science.gov (United States)

Cohen, Bonni S; Boni, Rebecca

2018-03-01

Simulation as a technology and holistic nursing care as a philosophy are two components within nursing programs that have merged during the process of knowledge and skill acquisition in the care of the patients as whole beings. Simulation provides opportunities to apply knowledge and skill through the use of simulators, standardized patients, and virtual settings. Concerns with simulation have been raised regarding the integration of the nursing process and recognizing the totality of the human being. Though simulation is useful as a technology, the nursing profession places importance on patient care, drawing on knowledge, theories, and expertise to administer patient care. There is a need to promptly and comprehensively define the concept of holistic nursing simulation to provide consistency and a basis for quality application within nursing curricula. This concept analysis uses Walker and Avant's approach to define holistic nursing simulation by defining antecedents, consequences, and empirical referents. The concept of holism and the practice of holistic nursing incorporated into simulation require an analysis of the concept of holistic nursing simulation by developing a language and model to provide direction for educators in design and development of holistic nursing simulation.

The Relationship between Academics' Conceptions of Knowledge, Research and Teaching--A Metaphor Study

Science.gov (United States)

Visser-Wijnveen, Gerda J.; Van Driel, Jan H.; Van Der Rijst, Roeland M.; Verloop, Nico; Visser, Anthonya

2009-01-01

Universities are supposed to be institutes where research and teaching are closely related. To understand this relationship fully, it is necessary to learn how academics perceive these key components. Different conceptions among academics may stem from varying conceptions of knowledge. Thirty academics were interviewed by means of metaphors about…

The essence of frailty: A systematic review and qualitative synthesis on frailty concepts and definitions.

Science.gov (United States)

Junius-Walker, Ulrike; Onder, Graziano; Soleymani, Dagmar; Wiese, Birgitt; Albaina, Olatz; Bernabei, Roberto; Marzetti, Emanuele

2018-05-31

One of the major threats looming over the growing older population is frailty. It is a distinctive health state characterised by increased vulnerability to internal and external stressors. Although the presence of frailty is well acknowledged, its concept and operationalisation are hampered by the extraordinary phenotypical and biological complexity. Yet, a widely accepted conception is needed to offer tailored policies and approaches. The ADVANTAGE Group aims to analyse the diverse frailty concepts to uncover the essence of frailty as a basis for a shared understanding. A systematic literature review was performed on frailty concepts and definitions from 2010 onwards. Eligible publications were reviewed using concept analysis that led to the extraction of text data for the themes "definition", "attributes", "antecedents", "consequences", and "related concepts". Qualitative description was used to further analyse the extracted text passages, leading to inductively developed categories on the essence of frailty. 78 publications were included in the review, and 996 relevant text passages were extracted for analysis. Five components constituted a comprehensive definition: vulnerability, genesis, features, characteristics, and adverse outcomes. Each component is described in more detail by a set of defining and explanatory criteria. An underlying functional perspective of health or its impairments is most compatible with the entity of frailty. The recent findings facilitate a focus on the relevant building blocks that define frailty. They point to the commonalities of the diverse frailty concepts and definitions. Based on these components, a widely accepted broad definition of frailty comes into range. Copyright © 2018 European Federation of Internal Medicine. Published by Elsevier B.V. All rights reserved.

Ecocultural effects on self-concept. A study with young indigenous people from different sociodemographic contexts.

Science.gov (United States)

Esteban-Guitart, Moisès; Borke, Jörn; Monreal-Bosch, Pilar

2015-08-01

This study explores self-concept among indigenous young people from different ecocultural niches in Chiapas (Mexico) through a particular self-concept task. Previous theory and research has described 3 cultural models linked with specific sociodemographic settings that foster particular psychologies. Our aim was to compare the results of the self-concept test among indigenous groups from different sociodemographic settings in order to observed possible differences. We predicted that individuals from rural communities with little formal education (hypothesised to be Interdependent) would have self-concepts with more social and less personal components than would those with an urban, highly educated (hypothesised to be Independent), and we expected a third group of highly educated young people living in an urban context but with a rural background (hypothesised to be autonomous-related group) to value social and personal components equally. The results supported this hypothesis. Based on ecocultural theory, it is suggested that sociodemographic contexts affect the self-concept. © 2014 International Union of Psychological Science.

Perspective on the fusion-fission energy concept

International Nuclear Information System (INIS)

Liikala, R.C.; Perry, R.T.; Teofilo, V.L.

1978-01-01

A concept which has potential for near-term application in the electric power sector of our energy economy is combining fusion and fission technology. The fusion-fission system, called a hybrid, is distinguished from its pure fusion counterpart by incorporation of fertile materials (uranium or thorium) in the blanket region of a fusion machine. The neutrons produced by the fusion process can be used to generate energy through fission events in the blanket or produce fuel for fission reactors through capture events in the fertile material. The performance requirements of the fusion component of hybrids is perceived as being less stringent than those for pure fusion electric power plants. The performance requirements for the fission component of hybrids is perceived as having been demonstrated or could be demonstrated with a modest investment of research and development funds. This paper presents our insights and observations of this concept in the context of why and where it might fit into the picture of meeting our future energy needs. A bibliography of hybrid research is given

The ITER EC H and CD Upper Launcher: Maintenance concepts

International Nuclear Information System (INIS)

Ronden, D.M.S.; Baar, M. de; Chavan, R.; Elzendoorn, B.S.Q.; Grossetti, G.; Heemskerk, C.J.M.; Koning, J.F.; Landis, J.-D.; Spaeh, P.; Strauss, D.

2013-01-01

Highlights: ► We explain how an overall maintenance strategy defines individual maintenance tasks. ► Concepts are presented for replacement strategies of the in-vessel optical components. ► Vertical placement of the Upper Launcher in the Hot Cell may simplify maintenance. -- Abstract: Maintenance of the ITER EC H and CD Upper Launcher (UL) shall be performed through the use of Remote Handling (RH) in the ITER Hot Cell Facility (HCF). The UL design will have to be fully compliant with ITER RH maintenance requirements and the set of RH tooling and services available in the HCF. This paper describes the development of an overall maintenance strategy for the UL, starting from a listing of all conceivable maintenance operations, including hands-on tasks. Components for which design concepts are discussed in this paper are the Blanket Shield Module (BSM), the steering mirror (M4), the mid optics (M1, M2) and the waveguide (WG) feed-through plate. Aspects related to RH documentation, overall maintenance strategy and design concepts for optimizing the maintainability of the UL are presented

Quasi-Birth-and-Death Processes with Rational Arrival Process Components

DEFF Research Database (Denmark)

Bean, Nigel G.; Nielsen, Bo Friis

2010-01-01

This paper introduces the concept of a Quasi-Birth-and-Death process (QBD) with Rational Arrival Process (RAP) components. We use the physical interpretation of the prediction process of the RAP, developed by Asmussen and Bladt, and develop an analysis that parallels the analysis of a traditional...... QBD. Further, we present an algorithm for the numerical evaluation of the matrix G. As an example, we consider two queues where the arrival process and the sequence of service times are taken from two dependent RAPs, that are not Markovian Arrival Processes......This paper introduces the concept of a Quasi-Birth-and-Death process (QBD) with Rational Arrival Process (RAP) components. We use the physical interpretation of the prediction process of the RAP, developed by Asmussen and Bladt, and develop an analysis that parallels the analysis of a traditional...

Challenges of the Open Source Component Marketplace in the Industry

Science.gov (United States)

Ayala, Claudia; Hauge, Øyvind; Conradi, Reidar; Franch, Xavier; Li, Jingyue; Velle, Ketil Sandanger

The reuse of Open Source Software components available on the Internet is playing a major role in the development of Component Based Software Systems. Nevertheless, the special nature of the OSS marketplace has taken the “classical” concept of software reuse based on centralized repositories to a completely different arena based on massive reuse over Internet. In this paper we provide an overview of the actual state of the OSS marketplace, and report preliminary findings about how companies interact with this marketplace to reuse OSS components. Such data was gathered from interviews in software companies in Spain and Norway. Based on these results we identify some challenges aimed to improve the industrial reuse of OSS components.

Osmotic actuation for microfluidic components in point-of-care applications

KAUST Repository

Chen, Yu-Chih; Ingram, Patrick; Lou, Xia; Yoon, Euisik

2013-01-01

at low cost. In this work, we report two key active components actuated by osmotic mechanism for total integrated microfluidic system. For the proof of concept, we have demonstrated valve actuation, which can maintain stable ON/OFF switching operations

Applying of component system development in object methodology

Directory of Open Access Journals (Sweden)

Milan Mišovič

2013-01-01

Full Text Available In the last three decades, the concept and implementation of component-based architectures have been promoted in software systems creation. Increasingly complex demands are placed on the software component systems, in particular relating to the dynamic properties. The emergence of such requirements has been gradually enforced by the practice of development and implementation of these systems, especially for information systems software.Just the information systems (robust IS of different types require that target software meets their requirements. Among other things, we mean primarily the adaptive processes of different domains, high distributives due to the possibilities of the Internet 2.0, acceptance of high integrity of life domains (process, data and communications integrity, scalability, and flexible adaptation to process changes, a good context for external devices and transparent structure of the sub-process modules and architectural units.Of course, the target software of required qualities and the type robust cannot be a monolith. As commonly known, development of design toward information systems software has clearly come to the need for the software composition of completely autonomous, but cooperating architectural units that communicate with each other using messages of prescribed formats.Although for such units there were often used the so called subsystems and modules, see (Jac, Boo, Rumbo, 1998 and (Arlo, Neus, 2007, their abstraction being gradually enacted as the term component. In other words, the subsystems and modules are specific types of components.In (Král, Žeml, 2000 and (Král, Žeml, 2003 there are considered two types of target software of information systems. The first type – there are SWC (Software Components, composed of permanently available components, which are thought as services – Confederate software. The second type – SWA (Software Alliance, called semi Confederate, formed during the run-time of the

Study of liquid hydrogen and liquid deuterium cold neutron sources; Etude de sources de neutrons froids a hydrogene et deuterium liquides

Energy Technology Data Exchange (ETDEWEB)

Harig, H D [Commissariat a l' Energie Atomique, Grenoble (France). Centre d' Etudes Nucleaires

1967-12-01

In view of the plant of the cold neutron source for a high flux reactor (maximal thermal flux of about 10{sup 15} n/cm{sup 2}s) an experimental study of several cold sources of liquid hydrogen and liquid deuterium has been made in a low power reactor (100 kW, about 10{sup 12} n/cm{sup 2}s). We have investigated: -cold neutron sources of liquid hydrogen shaped as annular layers of different thickness. Normal liquid hydrogen was used as well as hydrogen with a high para-percentage. -Cold neutron sources of liquid deuterium in cylinders of 18 and 38 cm diameter. In this case the sources could be placed into different positions to the reactor core within the heavy water reflector. This report gives a general description of the experimental device and deals more detailed with the design of the cryogenic systems. Then, the measured results are communicated, interpreted and finally compared with those of a theoretical study about the same cold moderators which have been the matter of the experimental investigation. (authors) [French] En vue de l'installation d'une source a neutrons froids dans un reacteur a haut flux (flux thermique maximal environ 10{sup 15} n/cm{sup 2}s), nous avons fait une etude neutronique experimentale de differentes sources froides a hydrogene et a deuterium liquides aupres d'un reacteur a faible puissance (100 kW environ 10{sup 12} n/cm{sup 2}s). Nous avons etudie: des couches annulaires de differentes epaisseurs d'hydrogene liquide normal et d'hydrogene a grand pourcentage para, des cellules cylindriques de 18 et 38 cm de diametre, remplies de deuterium liquide et placees a differentes positions dans le reflecteur D{sub 2}O. Ce travail traite l'implantation de l'installation cryogenique et donne une description generale de l'experience. L'interpretation des resultats fait etat entre autres d'une comparaison entre l'experience et une etude theorique portant sur les memes moderateurs. (auteurs)

Academic Self-Concept: Modeling and Measuring for Science

Science.gov (United States)

Hardy, Graham

2014-08-01

In this study, the author developed a model to describe academic self-concept (ASC) in science and validated an instrument for its measurement. Unlike previous models of science ASC, which envisage science as a homogenous single global construct, this model took a multidimensional view by conceiving science self-concept as possessing distinctive facets including conceptual and procedural elements. In the first part of the study, data were collected from 1,483 students attending eight secondary schools in England, through the use of a newly devised Secondary Self-Concept Science Instrument, and structural equation modeling was employed to test and validate a model. In the second part of the study, the data were analysed within the new self-concept framework to examine learners' ASC profiles across the domains of science, with particular attention paid to age- and gender-related differences. The study found that the proposed science self-concept model exhibited robust measures of fit and construct validity, which were shown to be invariant across gender and age subgroups. The self-concept profiles were heterogeneous in nature with the component relating to self-concept in physics, being surprisingly positive in comparison to other aspects of science. This outcome is in stark contrast to data reported elsewhere and raises important issues about the nature of young learners' self-conceptions about science. The paper concludes with an analysis of the potential utility of the self-concept measurement instrument as a pedagogical device for science educators and learners of science.

Concept Formation Skills in Long-Term Cochlear Implant Users

Science.gov (United States)

Castellanos, Irina; Kronenberger, William G.; Beer, Jessica; Colson, Bethany G.; Henning, Shirley C.; Ditmars, Allison; Pisoni, David B.

2015-01-01

This study investigated if a period of auditory sensory deprivation followed by degraded auditory input and related language delays affects visual concept formation skills in long-term prelingually deaf cochlear implant (CI) users. We also examined if concept formation skills are mediated or moderated by other neurocognitive domains (i.e., language, working memory, and executive control). Relative to normally hearing (NH) peers, CI users displayed significantly poorer performance in several specific areas of concept formation, especially when multiple comparisons and relational concepts were components of the task. Differences in concept formation between CI users and NH peers were fully explained by differences in language and inhibition–concentration skills. Language skills were also found to be more strongly related to concept formation in CI users than in NH peers. The present findings suggest that complex relational concepts may be adversely affected by a period of early prelingual deafness followed by access to underspecified and degraded sound patterns and spoken language transmitted by a CI. Investigating a unique clinical population such as early-implanted prelingually deaf children with CIs can provide new insights into foundational brain–behavior relations and developmental processes. PMID:25583706

An approach to automated chromosome analysis; Etudes pour une methode d'automatisation des analyses chromosomiques

Energy Technology Data Exchange (ETDEWEB)

Le Go, Roland

1972-05-03

d'une automatisation des differentes etapes de l'analyse chromosomique. Il est divise en trois tomes dont la matiere est decrite ci-apres. Dans le tome 1 est decrite l'etude d'un selecteur automatique de metaphases. Cet appareil doit realiser au cours du scanning d'une preparation, un processus de decision aboutissant a rejeter toutes images ininteressantes et a conserver les images pertinentes (bonnes metaphases). Ce probleme a ete aborde au moyen d'une etude sur ordinateur par un programme de simulation. La realisation de ce programme a permis d'etablir des algorithmes de selection dont la replique pourra etre realisee dans des circuits logiques electroniques. Dans le tome 2 est traite le probleme de l'automatisation de l'etude morphologique des chromosomes presents dans une metaphase. Cette automatisation necessite le traitement des photographies de metaphases par un appareil convertisseur optique-numerique qui extrait l'information-image et la transcrit sous la forme d'un fichier numerique. Ce fichier comporte pour une image de metaphase, environ 200 000 valeurs de gris, codees selon une echelle a 16, 32 ou 64 ni veaux. Ce fichier numerique est traite par un programme de reconnaissance de forme, qui isole les chromosomes et en recherche les traits caracteristiques: sommets de bras et region centromerique, dans le but d'obtenir des mensurations equivalentes aux longueurs des quatre bras. Le tome 3 etudie un programme d'etablissement automatique du caryotype humain, par appariement optimise des chromosomes. Les donnees proviennent de la numerisation directe des longueurs de bras, effectuee au moyen d'un lecteur digital BENSON. Le programme etablit une liste des appariements, un document graphique imprime representant les paires constituees, dans l'espace: longueur - index centromerique; enfin un document graphique obtenu sur traceur BENSON dans lequel l'auteur donne une representation personnelle des chromosomes, sous forme de croix a bras orthogonaux, dont chaque

Study of FeC1{sub 2} by neutron diffraction; Etude de Fe C1{sub 2} par diffraction de neutrons

Energy Technology Data Exchange (ETDEWEB)

Herpin, A; Meriel, P [Commissariat a l' Energie Atomique, Saclay (France)

1959-07-01

Magnetic measurements have shown that anhydrous ferrous chloride behaves as a metamagnetic at temperatures below 24 deg. K, in other words as an antiferromagnetic sensitive to the action of an external field of moderate strength. The aim of the neutron diffraction study is to determine precisely the arrangement of the magnetic moments, and to follow its evolution as a function of the applied field. (author) [French] Des mesures magnetiques ont montre que le chlorure ferreux anhydre se comporte comme un metamagnetique a une temperature inferieure a 24 deg. K, c'est a dire comme un antiferromagnetique sensible a l'action d'un champ exterieur modere. L'etude par diffraction de neutrons a pour buts de preciser la disposition des moments magnetiques et de suivre son evolution en fonction du champ applique. (auteur)

Components of Culture in Health for Medical Students' Education.

Science.gov (United States)

Tervalon, Melanie

2003-01-01

Describes key themes and components of culture in health care for incorporation into undergraduate medical education. These include teaching the rationale for learning about culture in health care; "culture basics"; data on and concepts of health status; tools and skills for productive cross-cultural clinical encounters; characteristics and…

Do Knowledge-Component Models Need to Incorporate Representational Competencies?

Science.gov (United States)

Rau, Martina Angela

2017-01-01

Traditional knowledge-component models describe students' content knowledge (e.g., their ability to carry out problem-solving procedures or their ability to reason about a concept). In many STEM domains, instruction uses multiple visual representations such as graphs, figures, and diagrams. The use of visual representations implies a…

Exploring psychosocial task resolution and self-concept among African-American adolescents.

Science.gov (United States)

Brookins, C C

1996-06-01

Developmental task resolution and self-concept of adolescents were examined for a sample of 110 African-American youth. The Erikson Psychosocial Stage Inventory was used to measure Erikson's stages of psychological development and the Bronstein-Cruz Child/Adolescent Self-concept and Adjustment Scale was used to measure multiple components of the self-concept. Scores for Self-concept and Resolution of Identity stages were highly correlated although scores on Resolution of Identity, commonly seen as the primary psychosocial task of adolescence, were not related to scores on either Emotional Well-being or Family Relations. The results are discussed in terms of improving understanding of relationships between processes in development, identity, and other salient psychosocial variables.

Beach sediments drift study by means of radioactive tracers; L'etude du transport littoral par la methode des traceurs radioactifs

Energy Technology Data Exchange (ETDEWEB)

Hours, R [Commissariat a l' Energie Atomique, Saclay (France).Centre d' Etudes Nucleaires; Jaffry, P [Electricite de France (EDF), 78 - Chatou (France). Lab. National d' Hydraulique

1959-07-01

The present state of the sediments drift studies by means of radioactive tracers is exposed. Various processes of labelling, immersion and detection, used in France and other countries, are reviewed. A more extended analysis of some aspects of the problem by the same authors can be found in 'La Houille Blanche', number 3, may-june 1959 (Rapport C.E.A. number 1269). (author) [French] L'etude du transport littoral des sediments et galets par la methode des traceurs radioactifs est en plein developpement. Le present rapport precise l'etat actuel de la question. Les techniques de marquage, d'immersion et de detection utilisees en France et a l'etranger sont decrites; une analyse plus detaillee de certains aspects de la question est presentee par les memes auteurs dans 'La Houille Blanche', numero 3, mai-juin 1959 (Rapport C.E.A. numero 1269). (auteur)

Therapeutic working alliance: From a psychoanalitical to a pantheoretical conception

Directory of Open Access Journals (Sweden)

Peter Praper

2004-05-01

Full Text Available Although the concept of therapeutic working alliance was rooted in psychoanalysis, today it is more prominent in psychoanalytic psychotherapies than psychoanalysis. It is rather surprising that we cannot find the concept in the Laplanche and Pontalis Dictionary. During the last two decades a growing body of empirical research material on therapeutic working alliance was published, confirming the idea of the alliance as a separate dimension of therapeutic relationship with few recognisable components. The dimension of the therapeutic working alliance was examined in several approaches and proved as one of the most important therapeutic factors, regardless of the approach, and it has finally been accepted as a pantheoretical concept.

Study of gamma radiation between 0.1 and 1.0 MeV in the earth's atmosphere; Etude du rayonnement gamma entre 0,1 et 1 Mev dans l'atmosphere terrestre

Energy Technology Data Exchange (ETDEWEB)

Boclet, D. [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

1967-01-01

The present work is devoted to some of the particular problems arising in the detection and localisation of sources of gamma radiation situated outside the earth's atmosphere. These weak sources can only be detected and localized if care is taken to eliminate gamma and particle radiations coming from other sources in the earth's atmosphere and in space. In order to separate the various sources of background noise, generally much stronger than the radiation under study, use is made of a directional detector whose characteristics are determined as described in the first part of the following report. The closest diffuse source considered is that constituted by the earth's atmosphere. Its detailed study will make it possible both to eliminate its effect when sources outside the earth are to be measured, and to predict the amount of secondary gamma radiation emitted by the same process in other celestial bodies, the moon in particular. This work considered in the 2. and 3. parts of the report. (author) [French] La presente etude est consacree a certains des problemes particuliers poses par la detection et la localisation des sources de rayonnement gamma situees hors de l'atmosphere terrestre. Ces sources faibles ne peuvent etre detectees et localisees que si l'on se protege des rayonnements gamma et particulaires provenant d'autres sources situees dans l'atmosphere terrestre et dans l'espace. Pour separer ces divers composants parasites, en general beaucoup plus intenses que le rayonnement a etudier, nous emploierons un detecteur directif dont nous determinons les caracteristiques dans la premiere partie de l'expose qui suit. La source diffuse la plus proche que nous considerons comme parasite est constituee par l'atmosphere terrestre. Son etude detaillee nous permettra d'une part de nous en proteger lorsque nous voudrons etudier les sources {gamma} extra-terrestres, d'autre part de prevoir le rayonnement gamma

Blowing loop in the EL-4 reactor: CO{sub 2} flow control analogue study; Boucle de soufflage de la centrale EL-4 - regulation du debit CO{sub 2} - etude analogique

Energy Technology Data Exchange (ETDEWEB)

Chazal, G; Merle, J P; Guillemard, B [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires; Leroy, C; Robin, L; Jacquin, J C; Cornudet, A [Societe INDATOM, France (France)

1966-07-01

This report describes one study which contributed to the construction of the Monts d'Arree nuclear power station: EL-4. The reactor is cooled by a CO{sub 2} current provided by 3 turbo-blower groups. The priming vapour for the turbines is taken at the exit of the main CO{sub 2} - H{sub 2}O exchangers. The operation of EL 4 is based on a high degree of centralization of the controls which attributes an important role to the general regulation circuits. This general regulation includes in particular an internal blowing loop which controls the CO{sub 2} flow. The study of the control of this CO{sub 2} flow is made up of 3 parts: - analogue representation of the reactors cooling circuit and of the turbo blower unit. - first test campaign using the analogue computer describing the natural behaviour of the system in the absence of control. theoretical determination of the regulation factors; definition of the regulation using an analogue computer and second test campaign for recording the performances of the blowing loop. The 4. part of the report deals with the analogue study: analogue equations - development. (authors) [French] Ce rapport prend place parmi les etudes de realisation de la Centrale des Monts d'Arree EL-4. Le reacteur est refroidi par une circulation de CO{sub 2} assuree par 3 groupes turbosoufflantes. La vapeur d'entrainement des turbines est prelevee a la sortie des echangeurs principaux CO{sub 2} - H{sub 2}O. L'exploitation de EL-4 repose sur une centralisation poussee des moyens de controle-commande qui attribue un role essentiel aux circuits de regulation generale. Cette regulation generale comporte en particulier une boucle interne de soufflage qui realise un asservissement du debit de CO{sub 2}. L'etude de cette regulation du debit CO{sub 2} comprend 3 parties: - representation analogique du circuit de refroidissement du reacteur et de l'ensemble turbine-soufflante. - premiere campagne d'essais sur calculateur analogique decrivant le comportement

Study of the retention of fission products by a few common minerals. Application to the treatment of medium activity effluents (1962); Etude de la retention des produits de fission par quelques mineraux usuels. Application aux traitements d'effluents de moyenne activite specifique (1962)

Energy Technology Data Exchange (ETDEWEB)

Auchapt, J M [Commissariat a l' Energie Atomique, Centre de Production de Plutonium, Marcoule (France). Centre d' Etudes Nucleaires

1962-07-01

The conditions in which strontium is fixed on calcite (the object of the Geneva report P/395 - USA - 1958) are more closely studied and the work is extended to five fission products present in the effluents, and to 17 common rocks and minerals. Although as it turns out this fixation is not suitable as a method of treating the S.T.E. effluents (i.e. those from the Effluent Treatment plant at Marcoule), the study shows that all the crystals considered are strongly contaminated by simple contact with the effluents. (author) [French] Les conditions de fixation du strontium sur la calcite (objet du rapport de Geneve P/395 - USA - 1958) sont approfondies et l'etude est etendue aux cinq produits de fission presents dans les effluents et a 17 roches et minerais courants. Bien qu'en definitive cette fixation se revele inutilisable comme procede de traitement d'effluents S.T.E. (Station de Traitement des Effluents, Marcoule), l'etude montre que tous les cristaux consideres se contaminent fortement par simple contact avec les effluents. (auteur)

Conception of Next Generation Networks

Directory of Open Access Journals (Sweden)

Slavko Šarić

2004-11-01

Full Text Available This article presents a review of the existing networks andthe NGN concept. By analysing the condition of the existingtelecommunication networks and services it is obvious that theyare different single-se1vice networks that cannot meet the requirementsof the users for various se1vices. The increased demandsof the users for telecommunication se1vices have inducedthe introduction of liberalization in the telecommunicationmarket. That opened the door for competition and greatinvestments in the development of telecommunication networks.The existing telecommunication networks orientated to thetransmission of voice and the existing data network could notbe adapted to new requirements without difficulties. That is thereason why the search for a solution for convergence and unionof a great number of different single-service networks started.The basic requirement was reduced in the end to the conceptionof the universal wideband data network that can meet all thedemands of the users by dividing the resources. As a collSequenceof that it was necessmy to find the solution for the transmissionof voice by a data network. The solution was seen in theerection of softswitch architecture for VoiP. Thus, the voicewould be transmitted by packets as one of the components indata transmission. It was necessary to define protocols for enablingthe operation in the NGN conception, as well as to thoroughlyobserve the problems of the JP telephony operation in regardto the real-time voice component. Apart from these tasks itwas necessmy to see how to adapt the existing networks into theNGN conception and to provide interaction between differentnetworks and different layers of networks by applying certainstandards and protocols. The awareness of the necessity ofgradual introduction and realization of NGN conception hasbecome obvious, always in the relation to the existing conditionof PSTN and the users' demands. Special attention should begiven to the introduction of IN as a

Chrono-potentiometry in molten chlorides. Application to the study of the electrochemical properties of uranium and plutonium in the LiCl-KCl eutectic; Chronopotentiometrie dans les chlorures fondus. Application a l'etude des proprietes electrochimiques de l'uranium et du plutonium dans l'eutectique LiCl-KCl

Energy Technology Data Exchange (ETDEWEB)

Leseur, A. [Commissariat a l' Energie Atomique, Fontenay-aux-Roses (France). Centre d' Etudes Nucleaires

1969-05-01

Using solutions of cadmium chloride in the eutectic LiCl-KCl, a chrono-potentiometric method has been developed with a view to its application to the study of molten solutions. Particular attention has been paid to the choice of the indicator electrodes. The method makes it possible to analyze molten solutions quantitatively and to determine diffusion coefficients and their activation energies; it yields furthermore information about the nature and the behaviour of ionic species in solution. The method has been applied to the study of solutions of uranium and plutonium chloride in the eutectic LiCl-KCl. Linear chrono-amperometry has been used for studying these solutions quantitatively, but chrono-potentiometry, of which the theory is better developed, is better suited to a quantitative study. The results obtained have made it possible to determine the diffusion coefficients of the ions Cd{sup 2+}, U{sup 3+}, U{sup 4+} and U(IV) in the presence of F{sup -} and Pu{sup 3+} ions, as well as the activation energy of the diffusion coefficients. (author) [French] La mise au point de la chronopotentiometrie comme moyen d'etude des solutions fondues a ete effectuee avec des solutions de chlorure de cadmium dans l'eutectique LiCl-KCl. Le probleme du choix des electrodes indicatrices a ete particulierement etudie. La methode permet l'analyse quantitative des solutions fondues ainsi que la determination des coefficients de diffusion et de leurs energies d'activation: elle donne en outre des renseignements sur la nature et le comportement des especes ioniques en solution. Elle a ete appliquee a l'etude des solutions des chlorures d'uranium et de plutonium dans l'eutectique LiCl-KCl. La chronoamperometrie lineaire a ete utilisee pour l'etude qualitative de ces solutions, mais la chronopotentiometrie, dont la theorie est plus complete, convient mieux pour l'etude quantitative. Les resultats obtenus ont permis de determiner les

Ecological, psychological, and cognitive components of reading difficulties: testing the component model of reading in fourth graders across 38 countries.

Science.gov (United States)

Chiu, Ming Ming; McBride-Chang, Catherine; Lin, Dan

2012-01-01

The authors tested the component model of reading (CMR) among 186,725 fourth grade students from 38 countries (45 regions) on five continents by analyzing the 2006 Progress in International Reading Literacy Study data using measures of ecological (country, family, school, teacher), psychological, and cognitive components. More than 91% of the differences in student difficulty occurred at the country (61%) and classroom (30%) levels (ecological), with less than 9% at the student level (cognitive and psychological). All three components were negatively associated with reading difficulties: cognitive (student's early literacy skills), ecological (family characteristics [socioeconomic status, number of books at home, and attitudes about reading], school characteristics [school climate and resources]), and psychological (students' attitudes about reading, reading self-concept, and being a girl). These results extend the CMR by demonstrating the importance of multiple levels of factors for reading deficits across diverse cultures.

Supply of a prototype component for the ITER divertor baffle

International Nuclear Information System (INIS)

Bobin-Vastra, I.; Febvre, M.; Schedler, B.; Ploechl, L.; Bouveret, Y.; Cauvin, D.; Raisson, G.; Merola, M.

2001-01-01

The ITER divertor baffle is one of the Plasma facing components which are developed in the frame of the ITER concept. The supply consisted in the manufacturing of four panels with four First Wall geometries using macroblock or heat sink+armour concepts. DS-Copper, and CuCrZr were the materials for the heat sink, and CFC or Tungsten Plasma spray were the armour. The panels included two Copper-based tubes each. The final purpose is the comparison of the fabricability of each type and the performances of each panel under heat fluxes

Uniframe: A Unified Framework for Developing Service-Oriented, Component-Based Distributed Software Systems

National Research Council Canada - National Science Library

Raje, Rajeev R; Olson, Andrew M; Bryant, Barrett R; Burt, Carol C; Auguston, Makhail

2005-01-01

.... It describes how this approach employs a unifying framework for specifying such systems to unite the concepts of service-oriented architectures, a component-based software engineering methodology...

Introduction to the concept of added mass in fluid mechanics

International Nuclear Information System (INIS)

Pham Dan Tam.

1977-07-01

The physical phenomenum which leads to the concept of added mass for an inviscid fluid is recalled. The added-mass tensor for a solid body moving through an unbounded fluid is defined and some of its properties are presented. The Taylor theorem is exposed, which enables some of the tensor components to be analytically derived in particular cases. Added-mass values are provided for bodies of particular shape. Applications of the added-mass concept to different problems are given [fr

SUSTAINABLE DEVELOPMENT, A MULTIDIMENSIONAL CONCEPT

Directory of Open Access Journals (Sweden)

TEODORESCU ANA MARIA

2015-06-01

Full Text Available Sustainable development imposed itself as a corollary of economic term "development". Sustainable development is meant to be the summation of economic, environmental and social considerations for the present and especially for the future. The concept of sustainable development plays an important role in european and global meetings since 1972, the year it has been set for the first time. Strategies necessary to achieve the objectives of sustainable development have been developed, indicators meant to indicate the result of the implementation of policies have been created, national plans were oriented towards achieving the proposed targets. I wanted to highlight the multidimensional character of the concept of sustainable development. Thus, using specialized national and international literature, I have revealed different approaches of one pillar to the detriment of another pillar depending on the specific field. In the different concepts of sustainable development, the consensus is undoubtedly agreed on its components: economic, social, environmental. Based on this fact, the concept of sustainability has different connotations depending on the specific content of each discipline: biology, economics, sociology, environmental ethics. The multidimensional valence of sustainable development consists of three pillars ability to act together for the benefit of present and future generations. Being a multidimensional concept, importance attached to a pillar over another is directed according to the particularities of each field: in economy profit prevails, in ecology care of natural resources is the most important, the social aims improving human living conditions. The challenge of sustainable development is to combine all the economic, environmental and social benefits and the present generation to come. Ecological approach is reflected in acceptance of limited natural resources by preserving natural capital. In terms of the importance of

Design and construction of a faraday cup for measuring small electron currents; Etudes et realisation d'une ''coupe de faraday'' pour les mesures de faibles courants electroniques

Energy Technology Data Exchange (ETDEWEB)

Veyssiere, A [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

1967-07-01

This paper describes the design of a device for measuring and integrating very small currents generated by the impact of a charged particle beam upon a Faraday cup. Part one considers the detector as such. The main component is a graphite bloc capable of stopping practically all the incident charges. Part two describes the associated electrode apparatus required to measure better than 10{sup -13} ampere with a precision- of 1 per cent: Integration of such weak currents over periods of several hours, in the presence of a strong background current, is also discussed. (author) [French] Ce rapport decrit l'etude et la realisation d'un ensemble permettant de mesurer et d'integrer sur des periodes de plusieurs heures des courants electroniques tres faibles provenant d'un faisceau de particules chargees, Dans la premiere partie du rapport nous etudierons le capteur proprement dit qui se compose essentiellement d'un bloc de graphite dont la forme et les dimensions sont telles, que la majeure partie des charges (positons et negatons de 60 MeV) est captee (1 pour mille reussissent a s'echapper). Dans la deuxieme partie nous decrivons l'appareillage associe au capteur capable de mesurer moins de 10{sup -13} ampere avec une precision de l'ordre du pour cent et d'integrer ce courant sur des periodes de temps variables, compte tenu de l'ambiance 'bruyante' (Accelerateur Lineaire) dans laquelle la mesure s'effectue. (auteur)

Concepts for reducing nuclear utility inventory carrying costs

International Nuclear Information System (INIS)

Graybill, R.E.; DiCola, F.E.; Solanas, C.H.

1985-01-01

Nuclear utilities are under pressure to reduce their operating and maintenance expenses such that the total cost of generating electricity through nuclear power remains an economically attractive option. One area in which expenses may be reduced is total inventory carrying cost. The total inventory carrying cost consists of financing an inventory, managing the inventory, assuring quality, engineering of acceptable parts specifications, and procuring initial and replenishment stock. Concepts and methodology must be developed to reduce the remaining expenses of a utility's total inventory carrying cost. Currently, two concepts exist: pooled inventory management system (PIMS), originally established by General Electric Company and a group of boiling water reactor owners, and Nuclear Parts Associates' (NUPA) shared inventory management program (SIMP). Both concepts share or pool parts and components among utilities. The SIMP program objectives and technical activities are summarized

Concept formation skills in long-term cochlear implant users.

Science.gov (United States)

Castellanos, Irina; Kronenberger, William G; Beer, Jessica; Colson, Bethany G; Henning, Shirley C; Ditmars, Allison; Pisoni, David B

2015-01-01

This study investigated if a period of auditory sensory deprivation followed by degraded auditory input and related language delays affects visual concept formation skills in long-term prelingually deaf cochlear implant (CI) users. We also examined if concept formation skills are mediated or moderated by other neurocognitive domains (i.e., language, working memory, and executive control). Relative to normally hearing (NH) peers, CI users displayed significantly poorer performance in several specific areas of concept formation, especially when multiple comparisons and relational concepts were components of the task. Differences in concept formation between CI users and NH peers were fully explained by differences in language and inhibition-concentration skills. Language skills were also found to be more strongly related to concept formation in CI users than in NH peers. The present findings suggest that complex relational concepts may be adversely affected by a period of early prelingual deafness followed by access to underspecified and degraded sound patterns and spoken language transmitted by a CI. Investigating a unique clinical population such as early-implanted prelingually deaf children with CIs can provide new insights into foundational brain-behavior relations and developmental processes. © The Author 2014. Published by Oxford University Press. All rights reserved. For Permissions, please e-mail: journals.permissions@oup.com.

Oxycoal-AC. Innovative components and concepts for the power plants of the future

Energy Technology Data Exchange (ETDEWEB)

Kneer, Reinhold; Toporov, Dobrin; Foerster, Malte [RWTH Aachen Univ. (DE). Inst. of Heat and Mass transfer (WSA)

2010-07-01

In the framework of the OXYCOAL-AC research project, detailed experimental and numerical investigations of oxycoal swirl flames have been made. The effects of high CO{sub 2} concentrations in the gas mixture during oxy-firing on the volatiles and particle ignition, flame propagation, flame stability, emissions and heat transfer in the boiler have been investigated and analyzed. Measures for oxy-flame stabilization as a function of flue gas recycling ratio (02 content) are derived and a swirl burner able to operate in both air and oxy-firing has been developed. Thus, OXYCOAL-AC became the first test-plant worldwide where coal can be burnt in a stable flame in a CO{sub 2} atmosphere with oxygen content between 18 and 30 vol. %. In addition, the development of the key component in the OXYCOAL-AC process, an ion transport membrane for oxigen production, is ongoing. Appropriate membrane materials have been identified and tested for their applicability to oxycoal conditions. Laboratory scale modules have been designed and successfully operated as membrane-based air separation units. Design concepts of scaled up membrane modules and their integration in pilot or power plant scale facilities are under development. Fly ash separation from the recycled hot flue gas is investigated by testing different ceramic filter materials. First oxy-firing experiments with wet recycled flue gas have shown an increased slagging behaviour of fly ash compared to air-firing conditions. Therefore more investigations on the behaviour of coal ash in oxyfuel atmosphere are scheduled. Further, numerical simulations of a utility scale (1200 MW{sub th}) boiler oxy-firing bituminous coal, based on non-grey implementation of the Exponential Wide Band Model, were performed with respect to retrofit. Comparisons are made between air firing and oxy-firing under boundary conditions varying with respect to oxygen and water content of the oxidizer. Predictions have shown that a significant increase of the

Proceedings of the European Symposium on Pressure Equipment - ESOPE 2007; Actes des Journees d'Etudes Europeennes Equipements sous Pression - ESOPE 2007

Energy Technology Data Exchange (ETDEWEB)

NONE

2007-07-01

Every three years, and since thirty years, the AFIAP organizes a symposium where the experts and actors working in the field of pressure equipments, whether fixed or transportable, can meet and exchange on all developments related to their activity. What was at first called the 'National Congress on the technology of pressure components', and later the 'Study Days on pressure components', became since 2001 the 'European Symposium on Pressure Equipment' (ESOPE), so marking an opening to the European and International fields in a context marked by the application of the European Directives applicable to these equipments. The 2001 symposium was more particularly dedicated to the application of the directives harmonizing the construction of equipments, and the 2004 symposium was more particularly centred on the management of equipments in operation. For the ESOPE 2007 Symposium, the organizing committee wished to resume these two subjects under the aspects of the safety, the competitiveness, as well as the innovation. The plenary session of the last day will be completely dedicated to these subjects and will include a Panel discussion, where National and European authorities, representatives of manufacturers and users, as well as experts engaged in developments and new projects will express their views. These exchanges will also permit to answer the questions expressed by the participants. Every symposium has thus a main orientation, but shall also be the place of exchanges on the different subjects wished by the profession. The traditional technical sessions are consequently maintained: - Sessions on Design and Materials, - Sessions on Fabrication, - Sessions on Fitness for Service, and a special session dedicated to the National, European and International Codes is added, the afternoon of the first day. The plenary Opening session is also devoted to this last subject with lectures on the evolutions of European regulations, the

HEALTH GeoJunction: place-time-concept browsing of health publications.

Science.gov (United States)

MacEachren, Alan M; Stryker, Michael S; Turton, Ian J; Pezanowski, Scott

2010-05-18

The volume of health science publications is escalating rapidly. Thus, keeping up with developments is becoming harder as is the task of finding important cross-domain connections. When geographic location is a relevant component of research reported in publications, these tasks are more difficult because standard search and indexing facilities have limited or no ability to identify geographic foci in documents. This paper introduces HEALTH GeoJunction, a web application that supports researchers in the task of quickly finding scientific publications that are relevant geographically and temporally as well as thematically. HEALTH GeoJunction is a geovisual analytics-enabled web application providing: (a) web services using computational reasoning methods to extract place-time-concept information from bibliographic data for documents and (b) visually-enabled place-time-concept query, filtering, and contextualizing tools that apply to both the documents and their extracted content. This paper focuses specifically on strategies for visually-enabled, iterative, facet-like, place-time-concept filtering that allows analysts to quickly drill down to scientific findings of interest in PubMed abstracts and to explore relations among abstracts and extracted concepts in place and time. The approach enables analysts to: find publications without knowing all relevant query parameters, recognize unanticipated geographic relations within and among documents in multiple health domains, identify the thematic emphasis of research targeting particular places, notice changes in concepts over time, and notice changes in places where concepts are emphasized. PubMed is a database of over 19 million biomedical abstracts and citations maintained by the National Center for Biotechnology Information; achieving quick filtering is an important contribution due to the database size. Including geography in filters is important due to rapidly escalating attention to geographic factors in public

HEALTH GeoJunction: place-time-concept browsing of health publications

Directory of Open Access Journals (Sweden)

Turton Ian J

2010-05-01

Full Text Available Abstract Background The volume of health science publications is escalating rapidly. Thus, keeping up with developments is becoming harder as is the task of finding important cross-domain connections. When geographic location is a relevant component of research reported in publications, these tasks are more difficult because standard search and indexing facilities have limited or no ability to identify geographic foci in documents. This paper introduces HEALTH GeoJunction, a web application that supports researchers in the task of quickly finding scientific publications that are relevant geographically and temporally as well as thematically. Results HEALTH GeoJunction is a geovisual analytics-enabled web application providing: (a web services using computational reasoning methods to extract place-time-concept information from bibliographic data for documents and (b visually-enabled place-time-concept query, filtering, and contextualizing tools that apply to both the documents and their extracted content. This paper focuses specifically on strategies for visually-enabled, iterative, facet-like, place-time-concept filtering that allows analysts to quickly drill down to scientific findings of interest in PubMed abstracts and to explore relations among abstracts and extracted concepts in place and time. The approach enables analysts to: find publications without knowing all relevant query parameters, recognize unanticipated geographic relations within and among documents in multiple health domains, identify the thematic emphasis of research targeting particular places, notice changes in concepts over time, and notice changes in places where concepts are emphasized. Conclusions PubMed is a database of over 19 million biomedical abstracts and citations maintained by the National Center for Biotechnology Information; achieving quick filtering is an important contribution due to the database size. Including geography in filters is important due to

Key components of financial-analysis education for clinical nurses.

Science.gov (United States)

Lim, Ji Young; Noh, Wonjung

2015-09-01

In this study, we identified key components of financial-analysis education for clinical nurses. We used a literature review, focus group discussions, and a content validity index survey to develop key components of financial-analysis education. First, a wide range of references were reviewed, and 55 financial-analysis education components were gathered. Second, two focus group discussions were performed; the participants were 11 nurses who had worked for more than 3 years in a hospital, and nine components were agreed upon. Third, 12 professionals, including professors, nurse executive, nurse managers, and an accountant, participated in the content validity index. Finally, six key components of financial-analysis education were selected. These key components were as follows: understanding the need for financial analysis, introduction to financial analysis, reading and implementing balance sheets, reading and implementing income statements, understanding the concepts of financial ratios, and interpretation and practice of financial ratio analysis. The results of this study will be used to develop an education program to increase financial-management competency among clinical nurses. © 2015 Wiley Publishing Asia Pty Ltd.

NOBLE - Flexible concept recognition for large-scale biomedical natural language processing.

Science.gov (United States)

Tseytlin, Eugene; Mitchell, Kevin; Legowski, Elizabeth; Corrigan, Julia; Chavan, Girish; Jacobson, Rebecca S

2016-01-14

Natural language processing (NLP) applications are increasingly important in biomedical data analysis, knowledge engineering, and decision support. Concept recognition is an important component task for NLP pipelines, and can be either general-purpose or domain-specific. We describe a novel, flexible, and general-purpose concept recognition component for NLP pipelines, and compare its speed and accuracy against five commonly used alternatives on both a biological and clinical corpus. NOBLE Coder implements a general algorithm for matching terms to concepts from an arbitrary vocabulary set. The system's matching options can be configured individually or in combination to yield specific system behavior for a variety of NLP tasks. The software is open source, freely available, and easily integrated into UIMA or GATE. We benchmarked speed and accuracy of the system against the CRAFT and ShARe corpora as reference standards and compared it to MMTx, MGrep, Concept Mapper, cTAKES Dictionary Lookup Annotator, and cTAKES Fast Dictionary Lookup Annotator. We describe key advantages of the NOBLE Coder system and associated tools, including its greedy algorithm, configurable matching strategies, and multiple terminology input formats. These features provide unique functionality when compared with existing alternatives, including state-of-the-art systems. On two benchmarking tasks, NOBLE's performance exceeded commonly used alternatives, performing almost as well as the most advanced systems. Error analysis revealed differences in error profiles among systems. NOBLE Coder is comparable to other widely used concept recognition systems in terms of accuracy and speed. Advantages of NOBLE Coder include its interactive terminology builder tool, ease of configuration, and adaptability to various domains and tasks. NOBLE provides a term-to-concept matching system suitable for general concept recognition in biomedical NLP pipelines.

Theoretical study and construction of a multichannel {beta} spectrometer with uniform magnetic field; Etude et realisation d'un spectrometre {beta} multivoies a champ magnetique uniforme

Energy Technology Data Exchange (ETDEWEB)

Schussler, F [Commissariat a l' Energie Atomique, Grenoble (France). Centre d' Etudes Nucleaires

1965-09-01

After a brief survey of the interest of a multichannel beta spectrometer for studying decay schemes of short lived nuclides (30 seconds minimum, the theoretically well known characteristics of uniform magnetic field analyser (image of a large source, transmission and resolution) are briefly remembered. In the second part, the apparatus built as a result of these calculations is described. This apparatus allows the determination of beta spectra by simultaneous determination of the beta spectra in coincidence with four gamma rays predetermined in the gamma spectrum of the studied nuclide. Finally, in the last part, the experimental characteristics of the spectrometer (calibration in energy and transmission) and the first measurement of beta spectra ({sup 155}Sm) and of coincidences ({sup 24}Na), are given. (author) [French] Apres avoir brievement souligne l'interet pratique que presente un spectrometre multivoies pour l'etude des schemas de desintegration des corps radioactifs de courtes periodes (30 secondes au maximum), l'auteur effectue un rappel des caracteristiques theoriques bien connues d'un analyseur magnetique a champ uniforme (image d'une source etendue) calcul de la transmission et du pouvoir de resolution. Une deuxieme partie est consacree a la description de l'appareil realise d'apres ces calculs. Cet appareil permet le releve des spectres beta par detection, simultanee de dix groupes d'electrons d'energies differentes; il permet egalement le releve simultane des spectres beta en coincidence avec quatre rayonnements gammas preselectionnes a l'avance dans le spectre gamma du corps etudie. Dans une derniere partie enfin, sont donnees les caracteristiques experimentales du spectrometre (etalonnage en energie et en transmission) ainsi que les premiers resultats des etudes de spectre beta ({sup 155}Sm) et de coincidence ({sup 24}Na). (auteur)

Contribution to the study of uranyl salts in butyl phosphate solutions; Contribution a l'etude des solutions de sels d'uranyle dans les phosphates butyliques

Energy Technology Data Exchange (ETDEWEB)

Coulon, A [Commissariat a l' Energie Atomique, Fontenay-aux-Roses (France). Centre d' Etudes Nucleaires

1965-06-01

A spectroscopic study in the normal infrared region and involving the following associations: tri-alkyl phosphates (tri-butyl, tri-ethyl, tri-methyl), uranyl salts (nitrate, chloride, acetate) has confirmed the existence of an interaction between the phosphoryl group and the uranium atom, as shown by a movement of absorption band for the valency P = 0 from {approx} 1270 cm{sup -1} to {approx} 1180 cm{sup -1}. A study of the preparation, analysis and spectroscopy of the solids obtained by the precipitation of uranyl salts by acid butyl phosphates has been carried out. By infrared spectrophotometry it has been shown that the tri-butyl and di-butyl phosphates are associated in non-polar diluents even before the uranium is introduced. The extraction of uranyl salts from acid aqueous solutions by a diluted mixture of tri-butyl and di-butyl phosphates proceeds by different mechanisms according to the nature of the ion (nitrate or chloride). (author) [French] Une etude spectroscopique dans l'infrarouge moyen portant sur les associations: - phosphates trialcoyliques (tributylique - triethylique - trimethylique) - sels d'uranyle (nitrate, chlorure, acetate) a confirme l'existence d'une interaction entre le groupement phosphoryle et l'atome d'uranium, se manifestant par un deplacement de la bande d'absorption de la vibration de valence P = 0 de {approx} 1270 cm{sup -1} a {approx} 1180 cm{sup -1}. Une etude preparative, analytique et spectroscopique des solides obtenus par precipitation de sels d'uranyle par les phosphates butyliques acides a ete effectuee. La spectrophotomerie infrarouge met en evidence l'association, anterieure a toute introduction d'uranium, des phosphates tributylique et dibutylique dans des diluants non polaires. L'extraction de sels d'uranyle, d'une solution aqueuse acide par un melange dilue de phosphates tributylique et dibutylique, s'effectue suivant des processus differents a la nature de l'anion (nitrate ou chlorure). (auteur)

18 Étude pour synchronisation des réseaux électriques de la ...

African Journals Online (AJOL)

Alex KPODE

au même résultat. Quant à HAMMOUD Asif, dans ses travaux de recherche « Etude des convertisseurs haute tension pour la protection et la coordination des réseaux de distribution » [5], il a surtout mos l'accent sur la protection lors de couplage des deux réseaux. Dans son mémoire intitulé « la conception, la modélisation ...

HMCBG processes related to the steel components in the KBS-3H disposal concept

International Nuclear Information System (INIS)

Johnson, Lawrence; Marschall, Paul; Wersin, Paul; Gribi, Peter

2008-05-01

An analysis of the Hydro-Mechanical-Chemical-microBiological processes affected by Gas (HMCBG) related to the steel components of the KBS-3H disposal concept has been performed. The outcome of this study is foreseen to contribute to the KBS-3H Process Report for a repository for spent fuel sited at Olkiluoto. Three different design options for KBS-3H are currently being studied (open tunnel option, two variants of tight distance block option). While the details of the design may influence the short to medium term performance, it is found that the medium to long-term evolution of KBS-3H is not significantly affected by the chosen design option, provided the distance blocks behave according to design. Under repository conditions, the corrosion of the supercontainer will be fairly rapid. Complete conversion of Fe0 to oxidised Fe 2+ /Fe 3+ species may occur within a few thousands of years. The main corrosion products will be magnetite and, depending on the groundwater composition, also iron sulphide and perhaps siderite. Furthermore, corrosion-derived Fe(II) may react with the clay to form Fe(II)-rich silicates. The supercontainer environment will thus experience a volume change and some loss of plasticity of the buffer between the supercontainer and the rock wall may occur. This might promote bacterial activity at the supercontainer surface, which would lead to an enhancement of localised corrosion and probably to destabilisation of the magnetite layer. Previous investigations indicate, however, that there will be no relevant bacterial activity in the main part of the buffer by virtue of its small pore sizes and low water activity. In the course of time, the swelling pressure of bentonite will be affected by a number of processes, including magnetite formation, geochemical degradation, intrusion of bentonite into void space either initially present or created by relative displacement of distance blocks and supercontainer, and by subsequent bentonite erosion. The

HMCBG processes related to the steel components in the KBS-3H disposal concept

Energy Technology Data Exchange (ETDEWEB)

Johnson, Lawrence; Marschall, Paul; Wersin, Paul (National Cooperative for the Disposal of Radioactive Waste, Nagra, Wettingen (Switzerland)); Gribi, Peter (SandR Consult GmbH, Baden (Switzerland))

2008-05-15

An analysis of the Hydro-Mechanical-Chemical-microBiological processes affected by Gas (HMCBG) related to the steel components of the KBS-3H disposal concept has been performed. The outcome of this study is foreseen to contribute to the KBS-3H Process Report for a repository for spent fuel sited at Olkiluoto. Three different design options for KBS-3H are currently being studied (open tunnel option, two variants of tight distance block option). While the details of the design may influence the short to medium term performance, it is found that the medium to long-term evolution of KBS-3H is not significantly affected by the chosen design option, provided the distance blocks behave according to design. Under repository conditions, the corrosion of the supercontainer will be fairly rapid. Complete conversion of Fe0 to oxidised Fe2+/Fe3+ species may occur within a few thousands of years. The main corrosion products will be magnetite and, depending on the groundwater composition, also iron sulphide and perhaps siderite. Furthermore, corrosion-derived Fe(II) may react with the clay to form Fe(II)-rich silicates. The supercontainer environment will thus experience a volume change and some loss of plasticity of the buffer between the supercontainer and the rock wall may occur. This might promote bacterial activity at the supercontainer surface, which would lead to an enhancement of localised corrosion and probably to destabilisation of the magnetite layer. Previous investigations indicate, however, that there will be no relevant bacterial activity in the main part of the buffer by virtue of its small pore sizes and low water activity. In the course of time, the swelling pressure of bentonite will be affected by a number of processes, including magnetite formation, geochemical degradation, intrusion of bentonite into void space either initially present or created by relative displacement of distance blocks and supercontainer, and by subsequent bentonite erosion. The expected

[Present conceptions of the C.E.A. concerning] the development of fast neutron reactors in France; [Les conceptions actuelles du C.E.A. concernant] la filiere des reacteurs a neutrons rapides en France

Energy Technology Data Exchange (ETDEWEB)

Vendryes, G; Gaussens, J [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires; Pasquer, R [Electricite de France (EDF), 75 - Paris (France)

1964-07-01

. (authors) [French] 1 - Situation des reacteurs a neutrons rapides dans le programme d'energie nucleaire francais. En developpant un programme base sur l'uranium naturel, la France se trouvera dotee d'un stock important de plutonium riche on isotopes superieurs. L'existence de ce plutonium et de l'uranium appauvri provenant des memes reacteurs a pour consequence logique leur emploi dans des reacteurs a neutrons rapides. Justifiee par cet interet a court terme, la mise au point de reacteurs a neutrons rapides repond par ailleurs a une necessite pour l'avenir. 2 - Enonce des caracteristiques d'une centrale a neutrons rapides de 1000 MW el. Nous indiquons les caracteristiques d'une future centrale a neutrons rapides chargee au plutonium et refroidie au sodium. Si incertaines qu'elles soient, elles constituent un guide necessaire a l'orientation de nos travaux. 3 - Etudes effectuees a ce jour: Nous donnons un apercu des etudes souvent tres preliminaires qui ont permis de retenir les caracteristiques citees plus haut. Les principaux domaines techniques abordes sont les suivants: - Neutronique (masses critiques, taux de regeneration, enrichissements, aplatissement du flux de neutrons, coefficients de reactivite, evolution de la reactivite en fonction de l'irradiation), - Dynamique, controle et surete, - Combustible, - Technologie (conception du bloc-pile, des circuits de sodium, des dispositifs pour la manutention des assemblages). Ces etudes techniques se completent de considerations economiques. Le choix de caracteristiques optimales est lie a l'existence de programmes de production d'electricite et, dans ces programmes, a celle des reacteurs a neutrons thermiques producteurs de plutonium. On montre comment il y a lieu de tenir compte de l'existence du plutonium dans ce contexte, et quels sont les mecanismes qui rattachent l'economie de ce plutonium au choix des parametres essentiels des reacteurs surgenerateurs. 4 - Reacteur prototype: On justifie l'interet d'une etape

Study of FeC1{sub 2} by neutron diffraction; Etude de Fe C1{sub 2} par diffraction de neutrons

Energy Technology Data Exchange (ETDEWEB)

Herpin, A.; Meriel, P. [Commissariat a l' Energie Atomique, Saclay (France)

1959-07-01

Magnetic measurements have shown that anhydrous ferrous chloride behaves as a metamagnetic at temperatures below 24 deg. K, in other words as an antiferromagnetic sensitive to the action of an external field of moderate strength. The aim of the neutron diffraction study is to determine precisely the arrangement of the magnetic moments, and to follow its evolution as a function of the applied field. (author) [French] Des mesures magnetiques ont montre que le chlorure ferreux anhydre se comporte comme un metamagnetique a une temperature inferieure a 24 deg. K, c'est a dire comme un antiferromagnetique sensible a l'action d'un champ exterieur modere. L'etude par diffraction de neutrons a pour buts de preciser la disposition des moments magnetiques et de suivre son evolution en fonction du champ applique. (auteur)

An evolutionary concept analysis of futility in health care.

Science.gov (United States)

Morata, Lauren

2018-06-01

To report a concept analysis of futility in health care. Each member of the healthcare team: the physician, the nurse, the patient, the family and all others involved perceive futility differently. The current evidence and knowledge in regard to futility in health care manifest a plethora of definitions, meanings and interpretations without consensus. Concept analysis. Databases searched included Medline, Cumulative Index of Nursing and Allied Health Literature, Academic Search Premier, Cochrane Database of Systematic Reviews and PsycINFO. Search terms included "futil*," "concept analysis," "concept," "inefficacious," "non-beneficial," "ineffective" and "fruitless" from 1935-2016 to ensure a historical perspective of the concept. A total of 106 articles were retained to develop the concept. Rogers' evolutionary concept analysis was used to evaluate the concept of futility from ancient medicine to the present. Seven antecedents (the patient/family autonomy, surrogate decision-making movement, the patient-family/physician relationship, physician authority, legislation and court rulings, catastrophic events and advancing medical technology) lead to four major attributes (quantitative, physiologic, qualitative, and disease-specific). Ultimately, futile care could lead to consequences such as litigation, advancing technology, increasing healthcare costs, rationing, moral distress and ethical dilemmas. Futility in health care demonstrates components of a cyclical process and a consensus definition is proposed. A framework is developed to clarify the concept and articulate relationships among attributes, antecedents and consequences. Further testing of the proposed definition and framework are needed. © 2018 John Wiley & Sons Ltd.

Advanced microwave processing concepts

Energy Technology Data Exchange (ETDEWEB)

Lauf, R.J.; McMillan, A.D.; Paulauskas, F.L. [Oak Ridge National Laboratory, TN (United States)

1995-05-01

The purpose of this work is to explore the feasibility of several advanced microwave processing concepts to develop new energy-efficient materials and processes. The project includes two tasks: (1) commercialization of the variable-frequency microwave furnace; and (2) microwave curing of polymer composites. The variable frequency microwave furnace, whose initial conception and design was funded by the AIC Materials Program, will allow us, for the first time, to conduct microwave processing studies over a wide frequency range. This novel design uses a high-power traveling wave tube (TWT) originally developed for electronic warfare. By using this microwave source, one can not only select individual microwave frequencies for particular experiments, but also achieve uniform power densities over a large area by the superposition of many different frequencies. Microwave curing of thermoset resins will be studied because it hold the potential of in-situ curing of continuous-fiber composites for strong, lightweight components. Microwave heating can shorten curing times, provided issues of scaleup, uniformity, and thermal management can be adequately addressed.

Planning a new research reactor for AECL: The MAPLE-MTR concept

International Nuclear Information System (INIS)

Lee, A.G.; Lidstone, R.F.; Donnelly, J.V.

1992-01-01

AECL Research is assessing its needs and options for future irradiation research facilities. A planning team has been assembled to identify the irradiation requirements for AECL's research programs and compile options for satisfying the irradiation requirements. The planning team is formulating a set of criteria to evaluate the options and will recommend a plan for developing an appropriate research facility. Developing the MAPLE Materials Test Reactor (MAPLE-MTR) concept to satisfy AECL's irradiation requirements is one option under consideration by the planning team. AECL is undertaking this planning phase because the NRU reactor is 35 years old and many components are nearing the end of their design life. This reactor has been a versatile facility for proof testing CANDU components and fuel designs because the CANDU irradiation environment was simulated quite well. However, the CANDU design has matured and the irradiation requirements have changed. Future research programs will emphasize testing CANDU components near or beyond their design limits. To provide these irradiation conditions, the NRU reactor needs to be upgraded. Upgrading and refurbishing the NRU reactor is being considered, but the potentially large costs and regulatory uncertainties make this option very challenging. AECL is also developing the MAPLE-MTR concept as a potential replacement for the NRU reactor. The MAPLE-MTR concept starts from the recent MAPLE-X10 design and licensing experience and adapts this technology to satisfy the primary irradiation requirements of AECL's research programs. This approach should enable AECL to minimize the need for major advances in nuclear technology (e.g., fuel design, heat transfer). The preliminary considerations for developing the MAPLE-MTR concept are presented in this report. A summary of AECL's research programs is presented along with their irradiation requirements. This is followed by a description of safety criteria that need to be taken into

On the Role of Service Concept in IT

Directory of Open Access Journals (Sweden)

DESPI Ioan

2009-12-01

Full Text Available Hard times affecting world-wide economy have strong consequences and are challenging IT departments from all sorts of enterprises. Expensive software projects are replaced by component-based agile systems and paradigms like SOA, REST, cloud computing are the new buzz-words. Behind the canvas, the service concept plays a central role, which we try to reveal.

Packaging of structural health monitoring components

Science.gov (United States)

Kessler, Seth S.; Spearing, S. Mark; Shi, Yong; Dunn, Christopher T.

2004-07-01

Structural Health Monitoring (SHM) technologies have the potential to realize economic benefits in a broad range of commercial and defense markets. Previous research conducted by Metis Design and MIT has demonstrated the ability of Lamb waves methods to provide reliable information regarding the presence, location and type of damage in composite specimens. The present NSF funded program was aimed to study manufacturing, packaging and interface concepts for critical SHM components. The intention is to be able to cheaply manufacture robust actuating/sensing devices, and isolate them from harsh operating environments including natural, mechanical, or electrical extremes. Currently the issues related to SHM system durability have remained undressed. During the course of this research several sets of test devices were fabricated and packaged to protect the piezoelectric component assemblies for robust operation. These assemblies were then tested in hot and wet conditions, as well as in electrically noisy environments. Future work will aim to package the other supporting components such as the battery and wireless chip, as well as integrating all of these components together for operation. SHM technology will enable the reduction or complete elimination of scheduled inspections, and will allow condition-based maintenance for increased reliability and reduced overall life-cycle costs.

Optimized maintenance concept of safety relevant valves related to ageing management features in nuclear power plants

International Nuclear Information System (INIS)

Koring, R.

2007-01-01

This paper presents the existing concept in E.ON Kernkraft and its sound application to ageing management issues by focussing on group 2 components such as safety relevant valves. It is demonstrated how the maintenance concept of safety relevant valves is supported by a valve diagnostic system accompanied by an applied procedure to assess the measured results with respect to the required functionality and ageing phenomena. Furthermore this concept has been developed to optimize the existing preventive maintenance of the safety relevant valves by implementing condition oriented aspects derived from the diagnostic results. The main issue of this maintenance concept is to demonstrate the high level of the secured function, reliability and performance of the safety relevant valves within an integrated ageing management. Additionally it offers improvements of all preventive maintenance issues as maintenance periods and the component related volume, spare parts management and costs. (author)

Characterization of solar thermal concepts for electricity generation: Volume 1, Analyses and evaluation

Energy Technology Data Exchange (ETDEWEB)

Williams, T.A.; Dirks, J.A.; Brown, D.R.; Drost, M.K.; Antoniac, Z.A.; Ross, B.A.

1987-03-01

This study is aimed at providing a relative comparison of the thermodynamic and economic performance in electric applications of several concepts that have been studied and developed in the DOE solar thermal program. Since the completion of earlier systems comparison studies in the late 1970's, there have been a number of years of progress in solar thermal technology. This progress has included development of new solar components, improvements in component and system design detail, construction of working systems, and collection of operating data on the systems. This study provides an updating of the expected performance and cost of the major components and the overall system energy cost for the concepts evaluated. The projections in this study are for the late 1990's time frame, based on the capabilities of the technologies that could be expected to be achieved with further technology development.

CONCEPTS AND CHARACTERISTICS OF CLOUD ORIENTED LEARNING ENVIRONMENT OF SCHOOL

Directory of Open Access Journals (Sweden)

Svitlana G. Lytvynova

2014-04-01

Full Text Available The article deals with the basic concepts and characteristics of cloud oriented learning environment (COLE of secondary school. It is examined the concept of "cloud oriented learning environment", "mobility training", the requirements for COLE, the goal of creating, the structural components, model deployment, maintenance. Four cloud storages are compared; the subjects and objects of COLE are described; the meaning of spatial and semantic, content and methodical, communication and organizational components are clarified; the benefits and features of cloud computing are defined. It is found that COLE creates conditions for active cooperation, provides mobility of learning process participants, and objects’ virtualization. It is available anywhere and at any time, ensures the development of creativity and innovation, critical thinking, ability to solve problems, to develop communicative, cooperative, life and career skills, to work with data, media, to develop ICT competence either of students and teachers.

Mathematical knowledge in teaching of fraction concepts using diagrammatical approach

Science.gov (United States)

Veloo, Palanisamy Kathir; Puteh, Marzita

2017-05-01

Teachers need various types of knowledge in order to deliver various fraction concepts at elementary level. In this paper, Balls' framework (2008) or, Mathematical Knowledge for Teaching (MKT) is used as benchmark guideline. This paper investigates and explores component of MKT knowledge among eight experienced teachers of the primary school. Data was collected using paper pencil test, interview and video recording. This paper, narrowed to teacher's knowledge and their practices while teaching of various fractions concepts using diagrammatical approach in present of MKT. The data gathered from teachers were analyzed using thematic analysis techniques. The results indicated that teachers lack various components of MKT knowledge as a proposal by various researchers and assumed that teaching as procedural more than enough due to lack of deep understanding of mathematics and the various types of MKT is not required due to the present of practices in the mathematics classroom.

Proof of integrity and ageing management of mechanical components in nuclear power plants

International Nuclear Information System (INIS)

Roos, E.; Herter, K.-H.; Kockelmann, H.; Schuler, X.

2005-01-01

Demands and requirements for a safe operation of mechanical components during the whole operation life time (plant life management) to assure aging phenomena (aging management) and to prove the integrity (prove of integrity, e.g. in order to exclude large breaks) can be found in guidelines, codes and standards. In the present paper a general concept to proof the integrity as part of the ageing management of pressurized components and systems is presented. The concept is based on the actual material characteristics, the actual as-built configurations and the design of the components and systems including the knowledge of possible failure mechanism during operation. An important part of the assessment is the leak before break behavior and the break preclusion concept. Based on essential research results the developed procedures and methodologies for the assessment of the critical crack sizes as well as the critical loading conditions are reported and discussed. In detail the following aspects have to be treated: (a) evaluation of the as-built status of quality (design, construction, material, fabrication; results of recurrent non destructive examinations up to now, operational experience); (b) determination of the relevant loading conditions by means of in-service monitoring (monitoring of the mode of operation, the water chemistry, the mechanical and thermal stresses, the dynamic loading), emergency and faulted condition loads as specified; (c) evaluation of the actual status of quality with respect to the relevant loading conditions (stress analysis-limitation of the stresses; fatigue analysis-determination of the usage factor; fracture mechanics analysis-determination of crack growth, critical crack sizes and loading conditions); (d) evaluation and extent of the in-service monitoring and recurrent inspections to guarantee the succeeding operation (recurrent non destructive examination - minimum detectable flaw sizes, examination area, examination intervals; leak

Technical Needs for Prototypic Prognostic Technique Demonstration for Advanced Small Modular Reactor Passive Components

Energy Technology Data Exchange (ETDEWEB)

Meyer, Ryan M.; Coble, Jamie B.; Hirt, Evelyn H.; Ramuhalli, Pradeep; Mitchell, Mark R.; Wootan, David W.; Berglin, Eric J.; Bond, Leonard J.; Henager, Charles H.

2013-05-17

This report identifies a number of requirements for prognostics health management of passive systems in AdvSMRs, documents technical gaps in establishing a prototypical prognostic methodology for this purpose, and describes a preliminary research plan for addressing these technical gaps. AdvSMRs span multiple concepts; therefore a technology- and design-neutral approach is taken, with the focus being on characteristics that are likely to be common to all or several AdvSMR concepts. An evaluation of available literature is used to identify proposed concepts for AdvSMRs along with likely operational characteristics. Available operating experience of advanced reactors is used in identifying passive components that may be subject to degradation, materials likely to be used for these components, and potential modes of degradation of these components. This information helps in assessing measurement needs for PHM systems, as well as defining functional requirements of PHM systems. An assessment of current state-of-the-art approaches to measurements, sensors and instrumentation, diagnostics and prognostics is also documented. This state-of-the-art evaluation, combined with the requirements, may be used to identify technical gaps and research needs in the development, evaluation, and deployment of PHM systems for AdvSMRs. A preliminary research plan to address high-priority research needs for the deployment of PHM systems to AdvSMRs is described, with the objective being the demonstration of prototypic prognostics technology for passive components in AdvSMRs. Greater efficiency in achieving this objective can be gained through judicious selection of materials and degradation modes that are relevant to proposed AdvSMR concepts, and for which significant knowledge already exists. These selections were made based on multiple constraints including the analysis performed in this document, ready access to laboratory-scale facilities for materials testing and measurement, and

Study of semi-conductor spectrometers for high counting rates. Application to the study of the reaction {sup 31}P (p, {alpha}{sub 0}): E{sub p} < 2 MeV; Etude de spectrometres a semi-conducteurs pour forts taux de comptage application a l'etude de la reaction {sup 31}P (p, {alpha}0): E{sub p} < 2 MeV

Energy Technology Data Exchange (ETDEWEB)

Ligeon, E [Commissariat a l' Energie Atomique, 38 - Grenoble (France). Centre d' Etudes Nucleaires

1967-10-01

The study of nuclear reactions involving particles of low charge (E < 2 MeV) calls for spectrometers of high resolving power. In many experiments however, the counting rate is high because of Coulomb scattering at the target: this results in a distortion of the experimental spectra and a loss of resolving power in the detection equipment. The first part of the work is devoted to an evaluation of the resolving power obtained with silicon-detector spectrometers. A study of the elastic scattering of protons by {sup 31}P shows which are the factors limiting the resolving power. In the second part we examine the various types of spectrometer which can be used in the case of a high count-rate. We have built an apparatus which can be used for carrying out spectrometry on particles produced by nuclear reactions, for a total, count-rate of 10{sup 5} counts/sec. (author) [French] L'etude des reactions nucleaires avec particules chargees a basse energie (E < 2 MeV) exige des spectrometres de haute resolution. Cependant, dans de nombreuses experiences le taux de comptage est eleve, par suite de la diffusion coulombienne sur la cible; on observe alors une distorsion des spectres experimentaux et une perte de resolution de l'ensemble de detection. La premiere partie de ce travail est consacree a l'evaluation de la resolution obtenue avec des spectrometres utilisant des detecteurs au silicium. L'etude de la diffusion elastique des protons sur le {sup 31}P montre quels sont les facteurs qui limitent la resolution. Dans une deuxieme partie, nous etudions les differents types de spectrometres que l'on peut utiliser dans le cas d'un taux de comptage eleve. Nous avons construit un appareil qui permet de faire la spectrometrie de particules, provenant de reactions nucleaires, pour un taux de comptage total de 10{sup 5} c/s. (auteur)

Design Process for Integrated Concepts with Responsive Building Elements

DEFF Research Database (Denmark)

Aa, Van der A.; Heiselberg, Per

2008-01-01

An integrated building concept is a prerequisite to come to an energy efficient building with a good and healthy IAQ indoor comfort. A design process that defines the targets and boundary conditions in the very first stage of the design and guarantees them until the building is finished and used...... is needed. The hard question is however: how to make the right choice of the combination of individual measures from building components and building services elements. Within the framework of IEA-ECBCS Annex 44 research has been conducted about the design process for integrated building concepts...

Design and performance study of the helium-cooled T-tube divertor concept

International Nuclear Information System (INIS)

Ihli, T.; Raffray, A.R.; Abdel-Khalik, S.I.; Shin, S.

2007-01-01

The ARIES-CS study has been launched with the goal of developing through physics and engineering optimization an attractive power plant concept based on a compact stellarator configuration. The study included an effort to characterize the divertor location and corresponding heat load distribution, and to develop a He-cooled divertor concept that could accommodate a heat flux of at least 10 MW/m 2 , and that would integrate well with the other power core components. This paper describes the design study of this divertor concept, which, although developed for a compact stellarator, is well suited for a tokamak configuration also

Kinetic ion exchange studies in ultramarines by the radioactive tracer method; Etudes cinetiques d'echanges d'ions dans les outremers par la technique des traceurs radioactifs

Energy Technology Data Exchange (ETDEWEB)

May, S; Goenvec, H; Pinte, G [Commissariat a l' Energie Atomique, Saclay (France).Centre d' Etudes Nucleaires

1960-07-01

The possibility of ion exchanges in various ultramarines has been studied in the aqueous phase. The kinetics of the exchange reactions is followed by studying the behaviour of a radioactive ion, either in the solution of the exchanging salt or in the ultramarine itself. The sodium in the make-up of the ultramarine, is found to exchange with various ions in solution. The reaction speeds appear to be governed by a diffusion process inside the grains of ultramarine. The diffusion coefficients and the activation energies are determined for the exchanges studied. Several exchange studies were carried out in an organic medium. The kinetics of ion exchange is also investigated in ultramarines from which most of the constituent sulphur has been eliminated. The results obtained in these ultramarines are compared with the exchange kinetics of the same ions in ordinary ultramarine. (author) [French] Nous avons etudie la possibilite d'echanges ioniques dans differents outremers, en phase aqueuse. L'etude cinetique des reactions d'echanges est suivie en etudiant le comportement d'ion radioactif, soit dans la solution du sel echangeant, soit dans l'outremer lui-meme. C'est le sodium de constitution de l'outremer qui s'echange avec differents ions en solution. Les vitesses de reactions semblent etre controlees par un processus de diffusion a l'interieur des grains d'outremer. Les coefficients de diffusion et les energies d'activation sont determines pour les echanges etudies. Quelques etudes sont realisees en milieu organique ou quelques echanges ont ete etudies. La cinetique d'echange d'ions est egalement etudie dans des outremers dans lesquels la majorite du soufre de constitution a ete eliminee. On compare les resultats obtenus dans ces outremers avec les cinetiques d'echanges des memes ions dans l'outremer ordinaire. (auteur)

Transactional Infrastructure of the Economy: the Evolution of Concepts and Synthesis of Definitions

OpenAIRE

Maruschak Irina Valeryevna

2017-01-01

The overview of evolution of market infrastructure concepts is provided, the first concepts of institutional infrastructure are revealed in the paper. Evolutionarily developed narrowing of essence of infrastructure in connection with the priority analysis of its physical (material and technological) components is proved. It ignores the fact that transactional resources, being drivers (driving forces) of economic systems evolution, in turn evolve, becoming harder and harder, combining increase...

Studying Motivational-Axiological Component of Professional Competence of a College Teacher

Science.gov (United States)

Gutsu, E. G.; Demeneva, N. N.; Kochetova, E. V.; Mayasova, T. V.; Belinova, N. V.

2016-01-01

Present article addresses the problem of changing requirements towards professional competencies of higher school teachers due to the introduction of new educational standards. Motivational-axiological component of college teacher's professional competence gets a central position. The article provides the authors' view upon the concept of…

Promissory Concept of medical education

Directory of Open Access Journals (Sweden)

Yuriy V. Voronenko

2015-01-01

Full Text Available Continuing medical education (CME is a dynamic system, where distance learning is an important component. In this article, we posit the Promissory Concept of distance learning. The central principle upon which this methodology is based is that the doctor can be located in any place where the information needed for his or her practice is easily available to the patient and where the doctor is able to monitor the development of his or her knowledge and practical skills, and is able to build his or her educational record of accomplishment. The Promissory Concept combines the availability of existing online opportunities with professional self-development which can be put to the test by an external supervisor (a professor or curator, who in turn will be able to identify existing advantages in knowledge, as well as those requiring further improvement, thus helping the learner's professional development. This approach was introduced to general practitioners and nephrologists practising in Ukraine in 2013. From 2014, the Promissory Concept has been associated with the Renal Eastern Europe Nephrology Academy's (REENA annual CME course, which has been accredited by ERA-EDTA (European Renal Association–European Dialysis and Transplant Association for the past 8 years. REENA is controlled by the state organisation of postgraduate education – Shupyk National Medical Academy of Postgraduate Education. The Promissory Concept is supported by printed educational material in the scientific medical Ukrainian journal Kidneys, which is registered in scientific databases (as a Google scholar, etc.. An important characteristic of the Promissory Concept is the active involvement of doctors, who give constructive feedback on the programme. This feedback contributes to the content of the CME learning activity, as well as enhancing compliance in participation. As a result, it helps create motivated adherence and improved professional development.

A new concept for accelerator driven transmutation of nuclear wastes

International Nuclear Information System (INIS)

Arthur, E.D.

1991-01-01

A new concept for an accelerator-driven transmutation system is described. The central feature of the concept is generation of intense fluxes of thermal neutrons. In the system all long-lived radionuclides comprising high-level nuclear waste can be transmuted efficiently. Transmutation takes place in a unique, low material inventory environment. Presently two principal areas are being investigated for application of the concept. The first is associated with cleanup of defense high-level waste at DOE sites such as Hanford. The second, longer term area involves production of electric power using a coupled accelerator-multiplying blanket system. This system would utilize natural thorium or uranium and would transmute long-lived components of high-level waste concurrently during operation. 5 refs., 5 figs

Bio-psycho-social factors affecting sexual self-concept: A systematic review

OpenAIRE

Potki, Robabeh; Ziaei, Tayebe; Faramarzi, Mahbobeh; Moosazadeh, Mahmood; Shahhosseini, Zohreh

2017-01-01

Background Nowadays, it is believed that mental and emotional aspects of sexual well-being are the important aspects of sexual health. Sexual self-concept is a major component of sexual health and the core of sexuality. It is defined as the cognitive perspective concerning the sexual aspects of ‘self’ and refers to the individual’s self-perception as a sexual creature. Objective The aim of this study was to assess the different factors affecting sexual self-concept. Methods English electronic...

Concept for a Differential Lock and Traction Control Model in Automobiles

Science.gov (United States)

Shukul, A. K.; Hansra, S. K.

2014-01-01

The automobile is a complex integration of electronics and mechanical components. One of the major components is the differential which is limited due to its shortcomings. The paper proposes a concept of a cost effective differential lock and traction for passenger cars to sports utility vehicles alike, employing a parallel braking mechanism coming into action based on the relative speeds of the wheels driven by the differential. The paper highlights the employment of minimum number of components unlike the already existing systems. The system was designed numerically for the traction control and differential lock for the world's cheapest car. The paper manages to come up with all the system parameters and component costing making it a cost effective system.

Conceptual benefits of passive nuclear power plants and their effect on component design

International Nuclear Information System (INIS)

DeVine, J.C. Jr.

1996-01-01

Today, nearly ten years after the advanced light water reactor (ALWR) Program was conceived by US utility leaders, and a decade and a half since a new nuclear power plant was ordered in the US, the ALWR passive plant is coming into its own. This design concept, a midsized simplified light water reactor, features extremely reliable passive systems for accident prevention and mitigation and combines proven experience with state-of-the-art engineering and human factors. It is now emerging as the front runner to become the next generation reactor in the US and perhaps around the world. Although simple and straightforward in concept, the passive plant is in many respects a significant departure from previous trends in reactor engineering. Successful implementation of this concept presents numerous challenges to the designers of passive plant systems and components. This paper provides a brief history of the ALWR program, it outlines the ALWR passive plant design objectives and principles, and it summarizes with examples their implications on component design. (orig.)

Study of fission product {gamma} spectra in the band 2-500 keV; Etude du spectre {gamma} des produits de fission dans la bande 0-500 keV

Energy Technology Data Exchange (ETDEWEB)

Rousseau, A. [Commissariat a l' Energie Atomique, Saclay (France).Centre d' Etudes Nucleaires

1959-07-01

In the study of the {gamma} spectrum of uranium fission products, particular attention has been given in this note to the part of the spectrum ranging between 0 and 500 keV after a given pile operating programme and the evolution of this spectrum with time after a pile shutdown has been followed. The study be related to the fission products which appear in the pile as a whole or on those produced in a uranium sample assumed to have been placed in the pile. The latter case has been envisaged here. The spectrum determination is based partly on theory and partly on experiment. The pile operating conditions are different in the two cases, which widens the range of validity of the spectra traced here. (author) [French] Dans l'etude du spectre {gamma} des produits de fission de l'uranium, on s'est plus particulierement interesse dans la presente note a determiner la partie du spectre qui s'etend entre 0 et 500 keV, au bout d'un fonctionnement donne de pile, et a suivre l'evolution de ce spectre dans le temps apres un arret de pile. L'etude peut porter sur les produits de fission apparus dans toute la pile ou sur ceux apparus dans un echantillon d'uranium suppose place en pile. C'est ce dernier cas que nous avons envisage. La determination du spectre s'appuie sur une partie theorique et sur une partie experimentale. Les fonctionnements de pile choisis sont differents dans les deux cas, ce qui permet d'etendre la gamme de validite des spectres traces ici. (auteur)

Study of fission product {gamma} spectra in the band 2-500 keV; Etude du spectre {gamma} des produits de fission dans la bande 0-500 keV

Energy Technology Data Exchange (ETDEWEB)

Rousseau, A [Commissariat a l' Energie Atomique, Saclay (France).Centre d' Etudes Nucleaires

1959-07-01

In the study of the {gamma} spectrum of uranium fission products, particular attention has been given in this note to the part of the spectrum ranging between 0 and 500 keV after a given pile operating programme and the evolution of this spectrum with time after a pile shutdown has been followed. The study be related to the fission products which appear in the pile as a whole or on those produced in a uranium sample assumed to have been placed in the pile. The latter case has been envisaged here. The spectrum determination is based partly on theory and partly on experiment. The pile operating conditions are different in the two cases, which widens the range of validity of the spectra traced here. (author) [French] Dans l'etude du spectre {gamma} des produits de fission de l'uranium, on s'est plus particulierement interesse dans la presente note a determiner la partie du spectre qui s'etend entre 0 et 500 keV, au bout d'un fonctionnement donne de pile, et a suivre l'evolution de ce spectre dans le temps apres un arret de pile. L'etude peut porter sur les produits de fission apparus dans toute la pile ou sur ceux apparus dans un echantillon d'uranium suppose place en pile. C'est ce dernier cas que nous avons envisage. La determination du spectre s'appuie sur une partie theorique et sur une partie experimentale. Les fonctionnements de pile choisis sont differents dans les deux cas, ce qui permet d'etendre la gamme de validite des spectres traces ici. (auteur)

Transformations of highly enriched uranium into metal or oxide; Etudes des procedes de transformation des composes d'uranium a fort enrichissement isotopique

Energy Technology Data Exchange (ETDEWEB)

Nollet, P; Sarrat, P [Commissariat a l' Energie Atomique, Fontenay-aux-Roses (France). Centre d' Etudes Nucleaires

1964-07-01

described successively, together with the studies which led to their development The civil engineering construction was begun in June 1962. The workshops are to start production in may 1964. (authors) [French] Les ateliers de traitement d'uranium enrichi de Cadarache ont pour but: d'une part, de transformer l'hexafluorure d'uranium en metal, ou en oxyde, et d'autre part, de recuperer l'uranium contenu dans les dechets divers produits lors des operations de transformation metallurgique. Les principes qui ont ete suivis pour la conception et la securite de ces ateliers sont exposes. La securite nucleaire est basee sur la geometrie des appareils de traitement. Pour mettre au point les procedes et la technologie de ces ateliers, de nombreuses etudes ont ete conduites depuis 1960, dont certaines ont abouti a des realisations originales. La transformation de l'hexafluorure d'uranium a fort enrichissement isotopique s'effectue, soit par injection en phase gazeuse dans l'ammoniaque, soit par un procede original de reduction directe en tetrafluorure d'uranium par l'hydrogene. La recuperation de l'uranium contenu dans les dechets metalliques d'uranium-zirconium s'operera par attaque par l'acide chlorhydrique, puis traitement du chlorure d'uranium par le fluor afin d'obtenir l'uranium sous forme d'hexafluorure. La recuperation de l'uranium contenu dans les dechets divers s'opere par un procede classique de raffinage: grillage des dechets metalliques, dissolution de l'oxyde obtenu dans l'acide nitrique, purification par solvant au tributyl-phosphate, precipitation a l'ammoniaque, calcination reduction fluoruration, calciothermie et traitement des scories. Deux ateliers separes fonctionnent suivant ce procede: l'un traite l'uranium d'un enrichissement isotopique inferieur ou egal a 3 p. 100, l'autre est reserve aux forts enrichissements. La mise en oeuvre, d'une maniere nucleairement sure, de chacune des etapes du procede a pose des problemes technologiques particuliers et a conduit a

CONCEPT AND MODELS FOR EVALUATION OF BLACK AND WHITE SMOKE COMPONENTS IN DIESEL ENGINE EXHAUST

Directory of Open Access Journals (Sweden)

Igor BLYANKINSHTEIN

2017-09-01

Full Text Available A method for measuring exhaust smoke opacity has been developed, which allows estimating the differentiated components forming black exhaust and those forming white smoke. The method is based on video recording and special software for processing the video recording data. The flow of the diesel exhaust gas is visualised using the digital camera, against the background of the screen, on a cut of an exhaust pipe, and with sufficient illumination of the area. The screen represents standards of whiteness and blackness. The content of the black components (soot is determined by the degree of blackening of the white standard in the frames of the video, and the content of whitish components (unburned fuel and oil, etc. is determined by the degree of whitening of black standard on the frames of the video. The paper describes the principle and the results of testing the proposed method of measuring exhaust smoke opacity. We present an algorithm for the frame-by-frame analysis of the video sequence, and static and dynamic mathematical models of exhaust opacity, measured under free-acceleration of a diesel engine.

Etude hyperfrequence et ultrasonore des supraconducteurs organiques kappa-(ET)(2)X (X = copper(thiocyanogen), copper[N(CN)(2)]bromine)

Science.gov (United States)

Frikach, Kamal

2001-09-01

Dans ce travail je presente une etude de l'impedance de surface, ainsi que de l'attenuation et la variation de la vitesse ultrasonores dans les etats normal et supraconducteur sur les composes organiques k-(ET)2X (X = Cu(SCN) 2, Cu[N(CN)2]Br). A partir des mesures d'impedance de surface, les deux composantes sigma 1 et sigma2 de la conductivite complexe sont extraites en utilisant le modele de Drude. Ces mesures montrent que la symetrie du parametre d'ordre dans ces composes est differente de celle du cas BCS. Afin de comprendre le profil de sigma1 (T) nous avons etudie les fluctuations supraconductrices a partir de la paraconductivite sigma'( T). Cette etude est rendue possible grace a la structure quasi-2D des composes k-(ET)2X dans lesquelles les fluctuations supraconductrices sont fortes. Ces dernieres sont observees sur deux decades de temperatures dans le Cu(SCN)2. L'application du modele de Aslamazov-Larkin 2D et 3D montre la possibilite du passage du regime 2D a haute temperature au regime 3D au voisinage de Tc. En se basant sur ce resultat, nous avons calcule la paraconductivite en utilisant une approche a l'ordre d'une boucle a partir du modele de Lawrence-Doniach. En tenant compte de la correction par la self energie dans la limite dynamique (17 GHz), l'ajustement de la paraconductivite calculee est en bon accord avec les donnees experimentales. Le couplage interplan obtenu est compatible avec le caractere quasi-2D des composes organiques. Le temps de relaxation des quasi-particules dans l'etat supraconducteur est ensuite extrait pour la premiere fois dans ces composes dont le comportement en fonction de la temperature est compatible avec la presence des noeuds dans le gap. Dans l'etat normal, la variation de la vitesse ultrasonore presente un comportement anormal caracterise par un fort ramollissement a T = 38 K et 50 K dans k-(ET) 2Cu(SCN)2 et k-(ET)2Cu[N(CN) 2]Br respectivement dont l'amplitude est independante du champ magnetique jusqu'a H = Hc 2

Large component regulatory relief in the United States

International Nuclear Information System (INIS)

Williams, J.L.; Boyle, R.W.

2004-01-01

The dismantling of retired nuclear power and test facilities required the transport of reactor vessels, reactor vessel heads, pressurizers, reactor coolant pumps, and steam generators; whereas the replacement of degraded components to continue operations has been generally limited to pressurized water reactor steam generators, and more recently, reactor heads. These components are quite large and massive, measuring up to 20 feet in diameter and 70 feet in length and weighing 50 to 600 tons. Issue Several issues arose, due to the implementation of the 1985 IAEA transportations regulations in the United States, on the practical matters of how to characterize the components and comply with the transportation regulations. The concept of a Surface Contaminated Object (SCO) was new to many in the U.S., and the large components were not readily amenable to transportation under the regulations. It was apparent that most of the components should be considered as SCO. However, it was not certain that the contamination limits for inaccessible areas could be met due to non-uniform contamination deposition; nor could the interior areas be readily surveyed without on-site dismantlement of the large component. Additionally, while the components were generally substantial in design and construction due to their use as pressure vessels under other codes, the current regulations required packages that met tests such as for stacking and free drop that would pose severe engineering challenges, prohibitive costs, or logistical difficulties during transport, due to the size and weight of the components being transport

Sexual Satisfaction Concept Analysis in Iranian Married Women: A Hybrid Model Study

Science.gov (United States)

Yekta, Zohre Parsa; Raisi, Firoozeh; Ebadi, Abbas; Shahvari, Zahra

2015-01-01

Background: Sexual satisfaction is considered to be a sexual right and an important component of sexual health. The purpose of this qualitative study was to clarify the meaning and the nature of sexual satisfaction in Iranian married women, and to provide a cultural-based definition of it. Method: Sexual satisfaction was examined in three phases by the Hybrid Model of concept analysis: (1) the theoretical phase; (2) the fieldwork phase and (3) the analytical phase. Hybrid concept analysis method was chosen because its inclusion of married women’s perspectives enriches the limits of sexual health search literature. Result: The critical attributes of sexual satisfaction were investigated. They included ‘two-dimensional structure’, ‘an affective response’, ‘a means to achieve marital satisfaction’, ‘unique’, ‘a concept based on expectations’ and ‘a concept on shadow of values’. Conclusion: The concept analysis of sexual satisfaction showed some of the attributes and antecedents for this concept that, have not been mentioned in the literature. PMID:26153166

Experiments prior to construction of the Rapsodie reactor (1962); Experiences preliminaires a la construction de la pile rapsodie (1962)

Energy Technology Data Exchange (ETDEWEB)

Vautrey, L; Zaleski, C P [Commissariat a l' Energie Atomique, Cadarache (France). Centre d' Etudes Nucleaires

1962-07-01

Before proceeding to the construction of the various reactor components described in the paper 'Fast Breeder Reactor Rapsodie', many experimental studies of a hydraulic, thermal and mechanical character have been carried out, or are under consideration, to test the validity of the principles adopted in the Preliminary Project. This paper deals with the most important of these: 1. Studies of coolant circuit components: sodium pumps (mechanical or electromagnetic), Na-NaK and NaK ir heat exchangers, measuring instruments (flow rates, temperatures), sodium purification circuits, etc. 2. Studies in cooling of fuel and fertile assemblies: a) study of the sodium cooling carried out by means of hydraulic mockups (scale of 1: 1 or over) reproducing the flow of the coolant fluid in the piping, upstream from and inside the fuel and fertile elements. b) study of the cooling by gas and by immersion in lead, employed during handling and storage operations. 3. Studies of special reactor devices: fusible rotating linkage, parts of the control rod mechanisms. 4. Study of the reactor block and coolant circuits as a whole. This study is to begin at the end of the year. The mock-up, now nearing completion, reproduces on a scale of 1: 1 the installation provided in the Preliminary Project and includes: the reactor block, to which is connected a high flow ate sodium circuit, permitting of long-term tests and thermal shocks, and also, a control rod testing circuit; complete installation of the 1 MW and 10 MW coolant circuits, the performances of which it will be possible to check under various operational conditions. 5. A safety study carried out on a 3: 10 scale mock p comprising the whole of the reactor block and shielding, with the object of limiting the effects of any accidental liberation of energy of an explosive character. (authors) [French] Avant d'entreprendre la realisation des divers elements du reacteur decrit dans le rapport 'Reacteur rapide surregenerateur RAPSODIE

Preparation and study of dialkyl nitroxide radicals; Preparation et etude de radicaux nitroxydes diacyles

Energy Technology Data Exchange (ETDEWEB)

Chenavas, P [Commissariat a l' Energie Atomique, Grenoble (France). Centre d' Etudes Nucleaires

1969-07-01

These radicals are obtained by oxidation of N-hydroxy-imides with lead tetracetate or p-nitro-perbenzoic acid. These imides are prepared by heating dicarboxylic acids anhydrides with benzyloxy-amine followed by catalytic hydrogenation of N-benzyloxy-imides so obtained. Two series of radicals have mainly been studied, the first concerning five-membered cyclic imides, the second six-membered cyclic imides, these molecules having methyls substituents or no on the carbon ring. N. M. R. spectra of some O-benzyl-imides have been analysed. These different results have made it possible to study the conformation and stereochemistry of these imides. (author) [French] Ces radicaux sont obtenus par oxydation d'imides N-hydroxyles par le tetracetate de plomb ou l'acide p-nitroperbenzoique; ces imides sont prepares par chauffage d'anhydrides de diacides en presence de benzyloxyamine suivie d'une hydrogenation catalytique des N-benzyloxyimides ainsi obtenus. Deux series de radicaux ont principalement ete etudies: la premiere relative a des imides cycliques a cinq chainons, la seconde a des imides cycliques a six chainons, ces molecules ayant des substituants methyles ou non sur la chaine carbonee. Les derives O-benzyles de quelques-uns de ces imides ont ete analyses en R. M. N. Ces differents resultats ont permis une etude de la conformation et de la stereochimie de ces imides. (auteur)

Preparation and study of dialkyl nitroxide radicals; Preparation et etude de radicaux nitroxydes diacyles

Energy Technology Data Exchange (ETDEWEB)

Chenavas, P. [Commissariat a l' Energie Atomique, Grenoble (France). Centre d' Etudes Nucleaires

1969-07-01

These radicals are obtained by oxidation of N-hydroxy-imides with lead tetracetate or p-nitro-perbenzoic acid. These imides are prepared by heating dicarboxylic acids anhydrides with benzyloxy-amine followed by catalytic hydrogenation of N-benzyloxy-imides so obtained. Two series of radicals have mainly been studied, the first concerning five-membered cyclic imides, the second six-membered cyclic imides, these molecules having methyls substituents or no on the carbon ring. N. M. R. spectra of some O-benzyl-imides have been analysed. These different results have made it possible to study the conformation and stereochemistry of these imides. (author) [French] Ces radicaux sont obtenus par oxydation d'imides N-hydroxyles par le tetracetate de plomb ou l'acide p-nitroperbenzoique; ces imides sont prepares par chauffage d'anhydrides de diacides en presence de benzyloxyamine suivie d'une hydrogenation catalytique des N-benzyloxyimides ainsi obtenus. Deux series de radicaux ont principalement ete etudies: la premiere relative a des imides cycliques a cinq chainons, la seconde a des imides cycliques a six chainons, ces molecules ayant des substituants methyles ou non sur la chaine carbonee. Les derives O-benzyles de quelques-uns de ces imides ont ete analyses en R. M. N. Ces differents resultats ont permis une etude de la conformation et de la stereochimie de ces imides. (auteur)

Definition of an instability criterion for precracked components in the elastic-plastic regime

International Nuclear Information System (INIS)

Kussmaul, K.; Eisele, U.; Clausmeyer, H.; Roos, E.

1994-01-01

By giving examples of complexly loaded large samples with dimensions similar to components, it was shown that by the indicated failure concept the maximum load of a component, even after cracking, can be quantitatively defined and utilized, provided the crack growth law for the existing multidirectional grade of the stress state is known. However, by comparing the stress states in the component with usual small-scale sample results it is possible to define the occurring failure process after crack initiation either in the form of stable crack widening or immediate instability (rupture). (orig.) [de

Introduction to Advanced Engine Control Concepts

Science.gov (United States)

Sanjay, Garg

2007-01-01

With the increased emphasis on aircraft safety, enhanced performance and affordability, and the need to reduce the environmental impact of aircraft, there are many new challenges being faced by the designers of aircraft propulsion systems. The Controls and Dynamics Branch at NASA (National Aeronautics and Space Administration) Glenn Research Center (GRC) in Cleveland, Ohio, is leading and participating in various projects in partnership with other organizations within GRC and across NASA, the U.S. aerospace industry, and academia to develop advanced controls and health management technologies that will help meet these challenges through the concept of Intelligent Propulsion Systems. The key enabling technologies for an Intelligent Propulsion System are the increased efficiencies of components through active control, advanced diagnostics and prognostics integrated with intelligent engine control to enhance operational reliability and component life, and distributed control with smart sensors and actuators in an adaptive fault tolerant architecture. This presentation describes the current activities of the Controls and Dynamics Branch in the areas of active component control and propulsion system intelligent control, and presents some recent analytical and experimental results in these areas.

Instrumental concept and preliminary performances of SIFTI: static infrared fourier transform interferometer

Science.gov (United States)

Hébert, Philippe-Jean; Cansot, E.; Pierangelo, C.; Buil, C.; Bernard, F.; Loesel, J.; Trémas, T.; Perrin, L.; Courau, E.; Casteras, C.; Maussang, I.; Simeoni, D.

2017-11-01

The SIFTI (Static Infrared Fourier Transform Interferometer) instrument aims at supporting an important part in a mission for atmospheric pollution sounding from space, by providing high spectral resolution and high Signal to Noise Ratio spectra of the atmosphere. They will allow to resolve tropospheric profiles of ozone (03) and carbon monoxide (C0), especially down to the planetary boundary layer (PBL), an altitude region of very high interest, though poorly monitored to date, for air quality and pollution monitoring. The retrieved profile of ozone, resp. C0, will contain 5 to 7, resp. 2.5 to 4, independent pieces of information. The French space agency CNES (Centre National d'Etudes Spatiales) has proposed and is studying an instrument concept for SIFTI based on a static interferometer, where the needed optical path are generated by a pair of crossed staircase fixed mirrors (replacing the moving reflector of dynamic Fourier transform interferometers like IASI or MIPAS). With the SIFTI design, a very high spectral resolution ( 0.1 cm-1 apodised) is achieved in a very compact optical setup, allowing a large throughput, hence a high SNR. The measurements are performed in the 9.5 μm band for 03 and in the 4.6 μm band for C0. The science return of the sounder can be further increased if an "intelligent pointing" process is implemented. This consists in combining the TIR sounder with a companion TIR imager, providing information on the cloud coverage in the next observed scene. 0nboard, real-time analysis of the IR image is used to command the sounder staring mirror to cloud free areas, which will maximize the probability for probing down to the surface. After the first part of the phase A, the architecture of SIFTI was studied as a trade-off between performance and resource budget. We review the main architecture and functional choices, and their advantages. The preliminary instrument concept is then presented in its main aspects and in terms of main subsystem

Sequential decision reliability concept and failure rate assessment

International Nuclear Information System (INIS)

Ciftcioglu, O.

1990-11-01

Conventionally, a reliability concept is considered together with both each basic unit and their integration in a complicated large scale system such as a nuclear power plant (NPP). Basically, as the plant's operational status is determined by the information obtained from various sensors, the plant's reliability and the risk assessment is closely related to the reliability of the sensory information and hence the sensor components. However, considering the relevant information-processing systems, e.g. fault detection processors, there exists a further question about the reliability of such systems, specifically the reliability of the systems' decision-based outcomes by means of which the further actions are performed. To this end, a general sequential decision reliability concept and the failure rate assessment methodology is introduced. The implications of the methodology are investigated and the importance of the decision reliability concept in system operation is demonstrated by means of sensory signals in real-time from the Borssele NPP in the Netherlands. (author). 21 refs.; 8 figs

Concept selection of car bumper beam with developed hybrid bio-composite material

International Nuclear Information System (INIS)

Davoodi, M.M.; Sapuan, S.M.; Ahmad, D.; Aidy, A.; Khalina, A.; Jonoobi, Mehdi

2011-01-01

Highlights: → We simulate the low impact test by Abaqus Ver16R9 using the same material model. → Six different weighted criteria were discussed to nominate the best concept. → Double Hat Profile showed the best concept to fulfil the defined PDS. → Geometric parameters may overcome the weak inherent properties of bio composite. → Toughened bio-composite material may employ in structural automotive components. -- Abstract: Application of natural fibre composites is going to increase in different areas caused by environmental, technical and economic advantages. However, their low mechanical properties have limited their particular application in automotive structural components. Hybridizations with other reinforcements or matrices can improve mechanical properties of natural fibre composite. Moreover, geometric optimizations have a significant role in structural strength improvement. This study focused on selecting the best geometrical bumper beam concept to fulfill the safety parameters of the defined product design specification (PDS). The mechanical properties of developed hybrid composite material were considered in different bumper beam concepts with the same frontal curvature, thickness, and overall dimensions. The low-speed impact test was simulated under the same conditions in Abaqus V16R9 software. Six weighted criteria, which were deflection, strain energy, mass, cost, easy manufacturing, and the rib possibility were analyzed to form an evaluation matrix. Topsis method was employed to select the best concept. It is concluded that double hat profile (DHP) with defined material model can be used for bumper beam of a small car. In addition, selected concept can be strengthened by adding reinforced ribs or increasing the thickness of the bumper beam to comply with the defined PDS.

EPRI 25kW high concentration photovoltaic integrated array concept and associated economics

International Nuclear Information System (INIS)

Gunn, J.A.; Dostalek, F.J.

1993-01-01

This paper describes a cost effective photovoltaic array design for the high concentration technology being developed by the Electric Power Research Institute for utility scale applications. The concept of an ''integrated array'' is to attach Fresnel lens parquets directly to the front of the tracker structure and PV panels directly to the back of the structure thereby eliminating redundant structural components. The concept also incorporates the maximum use of automated manufacturing techniques for all components thereby minimizing material waste, fabrication and assembly labor. This paper also describes the results of a first approach cost and economic study for the technology which shows the potential for levelized energy cost below $0.10/kWh for a 50 MW ac plant given a mature technology

Fallback level concepts for conventional and by-wire automotive brake systems

International Nuclear Information System (INIS)

Retzer, H; Mishra, R; Ball, A; Schmidt, K

2012-01-01

Brake-by-wire represents the replacement of traditional brake components such as pumps, hoses, fluids, brake boosters, and master cylinders by electronic sensors and actuators. The different design of these brake concepts poses new challenges for the automotive industry with regard to availability and fallback levels in comparison to standard conventional brake systems. This contribution focuses on the development of appropriate fallback level concepts. Hardware-in-the-loop (HIL) techniques and field trials will be used to investigate the performance and the usability of such systems.

Fallback level concepts for conventional and by-wire automotive brake systems

Science.gov (United States)

Retzer, H.; Mishra, R.; Ball, A.; Schmidt, K.

2012-05-01

Brake-by-wire represents the replacement of traditional brake components such as pumps, hoses, fluids, brake boosters, and master cylinders by electronic sensors and actuators. The different design of these brake concepts poses new challenges for the automotive industry with regard to availability and fallback levels in comparison to standard conventional brake systems. This contribution focuses on the development of appropriate fallback level concepts. Hardware-in-the-loop (HIL) techniques and field trials will be used to investigate the performance and the usability of such systems.

Research on The Construction of Flexible Multi-body Dynamics Model based on Virtual Components

Science.gov (United States)

Dong, Z. H.; Ye, X.; Yang, F.

2018-05-01

Focus on the harsh operation condition of space manipulator, which cannot afford relative large collision momentum, this paper proposes a new concept and technology, called soft-contact technology. In order to solve the problem of collision dynamics of flexible multi-body system caused by this technology, this paper also proposes the concepts of virtual components and virtual hinges, and constructs flexible dynamic model based on virtual components, and also studies on its solutions. On this basis, this paper uses NX to carry out model and comparison simulation for space manipulator in 3 different modes. The results show that using the model of multi-rigid body + flexible body hinge + controllable damping can make effective control on amplitude for the force and torque caused by target satellite collision.

Plant Control Concept for the Sodium Cooled Fast Reactor

International Nuclear Information System (INIS)

Kim, Eui Kwang; Kim, S. O.

2010-12-01

A power plant is designed for incorporation into a utility's grid system and follows the load demand through the steam generator, intermediate heat exchanger(IHX), from the nuclear core. During the load-following transients, various plant parameters must be controlled to protect the reactor core and other components in the plant. The purpose of this report is to review design considerations to establish SFR plant control and to design plant control concepts. The governing equations and solution procedure of the computer code to calculate plant temperature conditions during the part-load operation was reviewed and 4 types of plant operation concepts were designed, and the results of the calculations were compared

Design concept of a pump stage with replaceable hydraulic components and prediction of its performance curves

International Nuclear Information System (INIS)

Lugova, S O; Knyazeva, E G; Tverdokhleb, I B; Kochevsky, A N

2010-01-01

In many cases, centrifugal pump units are expected to deliver the required performance under varying operating conditions. In particular, the pumps for oil extraction and transportation should deliver a constant head, although their capacity often changes during the life cycle. In order to keep the efficiency at a high level and not to replace a whole pump, the authors suggest to replace in such cases only hydraulic components of the pump (impellers and stationary sections of diffuser channels) that are to be installed in the same casing. The paper describes an approach for designing of radial-flow impellers and sections of diffuser channels to be used as replaceable. It allows for delivering a required head and providing a high efficiency in a wide range of capacities. The components intended for smaller capacities are featured with narrower flow passages. However, the dimensions of replaceable components are the same. The paper describes also a numerical simulation of fluid flow in a pump stage with two sets of replaceable radial-flow impellers and sections of diffuser channels. The CFD software used in this research is ANSYS CFX 11. Good correspondence of results is observed. Difference in flow pattern at various capacities and its influence on the performance curves delivered with replaceable components is demonstrated. Basing on the obtained results, the analysis of energy losses is presented.

Contribution to the study of deformed heavy nuclei by means of nuclear reactions; Contribution a l'etude des noyaux lourds deformes au moyen de reactions nucleaires

Energy Technology Data Exchange (ETDEWEB)

Gastebois, J. [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

1968-06-01

The experimental results obtained in the study of the (d,p) reactions, at E{sub d} = 12 MeV, on the three even-even deformed nuclei {sup 170}Yb, {sup 172}Yb and {sup 174}Yb have been analysed in terms of DWBA calculations. The spectroscopic information relative to the odd final nuclei have been compared with the predictions of the collective model and of the Nilsson's model. The effect of various parameters used in the DWBA analysis (form factors, optical wave functions) has been carefully studied. The observed differences between the three final nuclei are qualitatively reproduced in the experimental study of resonances, seen in excitation functions of elastically and inelastically scattered protons on the same target nuclei, and corresponding to analogue states in the three nuclei {sup 171}Lu, {sup 173}Lu and {sup 175}Lu. (author) [French] Les resultats experimentaux de l'etude des reactions (d.p) a E{sub d} = 12 MeV, sur les noyaux deformes pairs-pairs {sup 170}Yb, {sup 172}Yb et {sup 174}Yb ont ete interpretes dans le cadre de l'approximation de Born des ondes deformees. Les informations spectroscopiques relatives aux noyaux impairs finals ont ete comparees aux predictions du modele collectif et du modele de Nilsson, apres avoir examine avec soin l'influence des differents parametres (facteurs de forme, fonctions d'onde 'optiques') utilises lors de l'analyse. Les differences observees entre les trois noyaux finals sont qualitativement reproduites par les resultats experimentaux de l'etude de resonances dans les fonctions d'excitation de diffusion elastique et inelastique de protons sur les memes noyaux-cibles, lors de la recherche d'etats analogues dans les noyaux {sup 171}Lu, {sup 173}Lu et {sup 175}Lu. (auteur)

Project ANSICHT. Final repository concept and backfilling and sealing concept for the final repository site model SUeD; Projekt ANSICHT. Endlagerkonzept sowie Verfuell- und Verschlusskonzept fuer das Endlagerstandortmodell SUeD. Technischer Bericht

Energy Technology Data Exchange (ETDEWEB)

Jobmann, Michael; Lommerzheim, Andree

2015-08-03

In the frame of ANSICHT the methodology for the demonstration of safe enclosure for high-level heat generating radioactive wastes is described. The report is based on the safety requirements for final repository concepts and shows a first backfilling and sealing concept that was developed for the final repository site model SUeD. The final repository model SUeD is based on a horizontal line storage concept, the Gorleben (VSG) and ERATO container concept and the mine layout were adopted and adapted to the given conditions. The backfill and sealing concept includes migration barriers, line closures and shaft closures in the frame of a redundant and diverse enclosure system. For all technical and geotechnical barrier components the long-term functional requirements were defined. The backfilling concept of underground cavities considers the variety of possible cavities in the line and infrastructure areas.

Radio-vulcanization of natural rubber in the latex phase. Study of an experimental 1 tonne per hour production; Radio-vulcanisation du caoutchouc naturel en phase latex. Etude d'une production experimentale de 1 tonne par heure

Energy Technology Data Exchange (ETDEWEB)

Leveque, P; Puig, J R; Roudeix, H [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

1968-07-01

After briefly reviewing the main research carried out on the radio-vulcanization of latex and elastomers, a description is given of 4 types of cell which have been used successively with a view to industrial irradiation. They have made it possible to acquire the information necessary for resolving the main problem arising during irradiation - the formation of coagulum. The first two cell are designed for irradiation by a horizontal beam ('Dynamitron'), the two others use a vertical beam ('Circe'). The study of the properties of the rubber obtained shows it to compare favorably with 'Revultex'. In the appendix are given some characteristics of natural latex and information about its processing. (authors) [French] Apres un rappel des principales etudes sur la radio-vulcanisation du latex et des elastomeres, on decrit les quatre types de cellules successivement essayes en vue de l'irradiation industrielle. Ils ont permis d'acquerir les informations necessaires a la resolution du probleme principal pose par l'irradiation, la formation de coagulum au cours de celle,-ci. Les deux premiers sont concus pour l'irradiation par un faisceau horizontal ('Dynamitron'), les derniers par un faisceau vertical ('Circe'). L'etude des proprietes du caoutchouc obtenu montre qu'il se compare favorablement au 'Revultex'. Un apercu est donne en annexe des caracteristiques du latex naturel et de sa mise en oeuvre. (auteurs)

Issues of integrating high-tech concepts into nuclear power plant operation

International Nuclear Information System (INIS)

Kisner, R.A.; Carter, R.J.; Lindsay, R.W.

1990-01-01

The stockpile of new ideas continues to grow for monitoring nuclear power plant parameters, characteristics, and vital signs and for controlling systems, subsystems, and components. This wide selection of monitoring and control software increases the difficulty of designing an integrated control room. As plant control room operators increase their reliance on computerized systems, including real-time plant data and data base systems, the integration of monitoring, diagnostics, and control software into uniform and seamless environment becomes imperative. A systematic approach to evaluating the usefulness of such high-tech control concepts is needed. This paper concentrates on methods to evaluate control concepts by assessing factors that determine a system's potential effectiveness within the context of the overall environment, including both human and machine components. Although not an in-depth study, this paper serves to outline several measures of utility. 21 refs., 3 figs., 2 tabs

The Indexical Nature of Sensory Concepts | O'Dea | Philosophical ...

African Journals Online (AJOL)

This paper advances the thesis that sensory concepts have as a semantic component the first-person indexical. It is argued that the private nature of our access to our own sensations forces, in our talking about them, an indexical reference to the inner states of the speaker in lieu of publicly accessible properties by which ...

Preliminary studies on the closed cycle magneto aerodynamic converter; Etudes preliminaires sur les convertisseurs magnetohydrodynamiques fonctionnant hors d'equilibre thermodynamique

Energy Technology Data Exchange (ETDEWEB)

Ricateau, P [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

1964-07-01

Besides the open cycle MHD converters which convert the thermal energy contained in combustion gases, a closed cycle converter which can work with any high temperature heat source and specially with nuclear sources is being very carefully studied. Before proceeding to a practical study of the power station as a whole the performances of the converter itself must be fully investigated. These performances are largely a function of the conductivity of the gas, but this conductivity must not be repaid by a temperature technically unacceptable for the heat exchanger. In the conversion fluid an ionizable seeding vapour such as caesium or potassium is mixed with a carrier gas, helium or argon. Purely thermal ionization is only efficient above 2 500 deg. K, whereas the electric field obtained by Induction in the converter can, under given conditions, increase the electron temperature and produce an ionization rate well above the equilibrium value. This allows the gas to be ionized at moderate temperature. Studies are under way in order to clarify the conditions required to produce extra-thermal ionization in seeded rare gases. Measurements have been performed with a 3-phase 500 kVA plasmatron with potassium-seeded argon. The outgoing gas is fed into a channel where the tensor components of conductivity are measured in the presence of a magnetic field. The values found under thermodynamic equilibrium conditions confirm the simple theory. This is not the case when the electrons are heated. Measurements of the same kind have been made by another method in caesium-seeded helium contained in an isothermal vessel at 1 900 deg. K. There also the equilibrium values are in good agreement, but non-equilibrium ionization seems to be lower than expected. The effect of electron heating inside the converter in the case of argon-. potassium mixture has been considered in a theoretical study. It is shown that the electrode set must be carefully subdivided along the channel, and that

Proposal on the accelerator driven molten-salt reactor (ATW concept) benchmark calculations. (STAGE 1 - without an external neutron source)

International Nuclear Information System (INIS)

Svarny, J.; Mikolas, P.

1999-01-01

The first stage of ATW neutronic benchmark (without an external source), based on the simple modelling of two component concept is presented. The simple model of two component concept of the ATW (graphite + molten salt system) was found. The main purpose of this benchmark is not only to provide the basic characteristics of given ADS but also to test codes in calculations of the rate of transmutation waste and to evaluate basic kinetics parameters and reactivity effects. (author)

Identifying and Analyzing Strong Components of an Industrial Network Based on Cycle Degree

Directory of Open Access Journals (Sweden)

Zhiying Zhang

2016-01-01

Full Text Available In the era of big data and cloud computing, data research focuses not only on describing the individual characteristics but also on depicting the relationships among individuals. Studying dependence and constraint relationships among industries has aroused significant interest in the academic field. From the network perspective, this paper tries to analyze industrial relational structures based on cycle degree. The cycle degree of a vertex, that is, the number of cycles through a vertex in an industrial network, can describe the roles of the vertices of strong components in industrial circulation. In most cases, different vertices in a strong component have different cycle degrees, and the one with a larger cycle degree plays more important roles. However, the concept of cycle degree does not involve the lengths of the cycles, which are also important for circulations. The more indirect the relationship between two industries is, the weaker it is. In order to analyze strong components thoroughly, this paper proposes the concept of circular centrality taking into consideration the influence by two factors: the lengths and the numbers of cycles through a vertex. Exemplification indicates that a profound analysis of strong components in an industrial network can reveal the features of an economy.

The concepts of leak before break and absolute reliability of NPP equipment and piping

International Nuclear Information System (INIS)

Getman, A.F.; Komarov, O.V.; Sokov, L.M.

1997-01-01

This paper describes the absolute reliability (AR) concept for ensuring safe operation of nuclear plant equipment and piping. The AR of a pipeline or component is defined as the level of reliability when the probability of an instantaneous double-ended break is near zero. AR analysis has been applied to Russian RBMK and VVER type reactors. It is proposed that analyses required for application of the leak before break concept should be included in AR implementation. The basic principles, methods, and approaches that provide the basis for implementing the AR concept are described

The concepts of leak before break and absolute reliability of NPP equipment and piping

Energy Technology Data Exchange (ETDEWEB)

Getman, A.F.; Komarov, O.V.; Sokov, L.M. [and others

1997-04-01

This paper describes the absolute reliability (AR) concept for ensuring safe operation of nuclear plant equipment and piping. The AR of a pipeline or component is defined as the level of reliability when the probability of an instantaneous double-ended break is near zero. AR analysis has been applied to Russian RBMK and VVER type reactors. It is proposed that analyses required for application of the leak before break concept should be included in AR implementation. The basic principles, methods, and approaches that provide the basis for implementing the AR concept are described.

Responsibility among bachelor degree nursing students: A concept analysis.

Science.gov (United States)

Ghasemi, Saeed; Ahmadi, Fazlollah; Kazemnejad, Anoshirvan

2018-01-01

Responsibility is an important component of the professional values and core competencies for bachelor degree nursing students and has relationships with nursing education and professionalization. It is important for providing safe and high-quality care to the clients for the present and future performance of student. But there is no clear and operational definition of this concept for bachelor degree nursing students; however, there are extensive contents and debates about the definitions, attributes, domains and boundaries of responsibility in nursing and non-nursing literature. To examine the concept of responsibility among bachelor degree nursing students using the evolutionary approach to concept analysis. A total of 75 articles published between 1990 and 2016 and related to the concept of responsibility were selected from seven databases and considered for concept analysis based on Rogers' evolutionary approach. Ethical considerations: Throughout all stages of data collection, analysis and reporting, accuracy and bailment were respected. Responsibility is a procedural, spectral, dynamic and complex concept. The attributes of the concept are smart thinking, appropriate managerial behaviours, appropriate communicational behaviours, situational self-mandatory and task-orientation behaviours. Personal, educational and professional factors lead to the emergence of the responsible behaviours among bachelor degree nursing students. The emergence of such behaviours facilitates the learning and education process, ensures nursing profession life and promotes clients and community health level. Responsibility has some effects on nursing students. This concept had been changed over time since 1990-2016. There are similarities and differences in the elements of this concept in disciplines of nursing and other educational disciplines. Conclusion The analysis of this concept can help to develop educational or managerial theories, design instruments for better identification

Concept Design of Movable Beam of Hydraulic Press

Directory of Open Access Journals (Sweden)

Li Yancong

2017-01-01

Full Text Available The hydraulic press movable beam is one of the key components of the hydraulic press; its design quality impacts the accuracy of the workpiece that the press suppressed. In this paper, first, with maximum deflection and material strength as constraints, mechanical model of the movable beam is established; next, the concept design model of the moveable beam structure is established; the relationship among the force of the side cylinder, the thickness of the inclined plate, outer plate is established also. Taking movable beam of the 100MN type THP10-10000 isothermal forging hydraulic press as an example, the conceptual design result is given. This concept design method mentoned in the paper has general meaning and can apply to other similar product design.

The concept of physical limitations in knee osteoarthritis

DEFF Research Database (Denmark)

Klokker, Louise; Osborne, Richard; Wæhrens, Eva Elisabet Ejlersen

2015-01-01

OBJECTIVE: To comprehensively identify components of the physical limitation concept in knee osteoarthritis (OA) and to rate the clinical importance of these using perspectives of both patients and health professionals. DESIGN: Concept mapping, a structured group process, was used to identify...... and organize data in focus groups (patients) and via a global web-based survey (professionals). Ideas were elicited through a nominal group technique and then organized using multidimensional scaling, cluster analysis, participant validation, rating of clinical importance, and thematic analyses to generate...... a conceptual model of physical limitations in knee OA. RESULTS: Fifteen Danish patients and 200 international professionals contributed to generating the conceptual model. Five clusters emerged: 'Limitations/physical deficits'; 'Everyday hurdles'; 'You're not the person you used to be'; 'Need to adjust way...

Exploring the Relationship between Secondary Science Teachers' Subject Matter Knowledge and Knowledge of Student Conceptions While Teaching Evolution by Natural Selection

Science.gov (United States)

Lucero, Margaret M.; Petrosino, Anthony J.; Delgado, Cesar

2017-01-01

The fundamental scientific concept of evolution occurring by natural selection is home to many deeply held alternative conceptions and considered difficult to teach. Science teachers' subject matter knowledge (SMK) and the pedagogical content knowledge (PCK) component of knowledge of students' conceptions (KOSC) can be valuable resources for…

Development of a New RF Finger concept for vacuum beam line interconnections

CERN Document Server

Garion, C; Rambeau, H

2012-01-01

RF contact fingers are primarily used as a transition element to absorb the thermal expansion of vacuum chambers during bake-out and also to compensate for mechanical tolerances. They have to carry the beam image current to avoid the generation of Higher Order Modes and to reduce beam impedances. They are usually made out of copper beryllium thin sheets and are therefore very fragile and critical components. In this paper, a robust design based on a deformable finger concept is proposed. It allows the compensation of large longitudinal movements and also defaults such as transverse offset, twist or bending. The concept of this new RF fingers is first explained, then the design of the component is presented. The mechanical study based on a highly non-linear Finite Element model is shown as well as preliminary tests, including fatigue assessment, carried out on prototypes.

Space Mission Concept Development Using Concept Maturity Levels

Science.gov (United States)

Wessen, Randii R.; Borden, Chester; Ziemer, John; Kwok, Johnny

2013-01-01

Over the past five years, pre-project formulation experts at the Jet Propulsion Laboratory (JPL) has developed and implemented a method for measuring and communicating the maturity of space mission concepts. Mission concept development teams use this method, and associated tools, prior to concepts entering their Formulation Phases (Phase A/B). The organizing structure is Concept Maturity Level (CML), which is a classification system for characterizing the various levels of a concept's maturity. The key strength of CMLs is the ability to evolve mission concepts guided by an incremental set of assessment needs. The CML definitions have been expanded into a matrix form to identify the breadth and depth of analysis needed for a concept to reach a specific level of maturity. This matrix enables improved assessment and communication by addressing the fundamental dimensions (e.g., science objectives, mission design, technical risk, project organization, cost, export compliance, etc.) associated with mission concept evolution. JPL's collaborative engineering, dedicated concept development, and proposal teams all use these and other CML-appropriate design tools to advance their mission concept designs. This paper focuses on mission concept's early Pre-Phase A represented by CMLs 1- 4. The scope was limited due to the fact that CMLs 5 and 6 are already well defined based on the requirements documented in specific Announcement of Opportunities (AO) and Concept Study Report (CSR) guidelines, respectively, for competitive missions; and by NASA's Procedural Requirements NPR 7120.5E document for Projects in their Formulation Phase.

Reading literacy and reading self-concept of year 6 primary school students

OpenAIRE

Cegnar, Katja

2017-01-01

In the present Master thesis, we research the relation between the reading literacy and its components and the reading self-concept in grade 6 elementary school students. Sixth grade students were chosen because they are partially taught by class teachers and because we assume that they are already familiar with the reading comprehension technique and have a more-or-less stable reading self-concept. In the theoretical part, we present the importance of functional literacy and of other types o...

Contribution to the study of the vertical molten zone process (1963); Contribution a l'etude du procede de la zone fondue verticale (1963)

Energy Technology Data Exchange (ETDEWEB)

Lenzin, M [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

1963-07-01

Construction and use of several molten zone apparatuses operating either vertically or horizontally. Efficient purification of uranyl nitrate hexahydrate but less successful in the case of other hydrated double salts and of zirconyl chloride in the hydrochloric gel form. Demonstration and study of the dissymmetry in the direction of the transport of the impurity during, the purification by a vertical molten zone process. (author) [French] Construction et utilisation de plusieurs appareils de zone fondue travaillant soit en vertical, soit en horizontal. Purification efficace du nitrate d'uranyle hexahydrate mais peu significative dans le cas des autres couples de sels hydrates et du chlorure de zirconyle a l'etat de gel chlorhydrique. Mise en evidence et etude de la dissymetrie sur le sens de transport de l'impurete au cours de la purification par zone fondue verticale. (auteur)

New concepts for controlled fusion reactor blanket design

International Nuclear Information System (INIS)

Conn, R.W.; Kulcinski, G.L.; Avci, H.; El-Maghrabi, M.

1975-01-01

Several new concepts for fusion reactor blanket design based on the idea of shifting, or tailoring, the neutron spectrum incident on the first structural wall are presented. The spectral shifter is a nonstructural element which can be made of graphite, silicon carbide, or three dimensionally woven carbon fibers (and containing other materials as appropriate) placed between the neutron source and the first structural wall. The softened neutron spectrum incident on the structural components leads to lower gas production and atom displacement rates than in more standard fusion blanket designs. In turn, this results in longer anticipated lifetimes for the structural materials and can significantly reduce radioactivity and afterheat levels. In addition, the neutron spectrum in the first structural wall can be made to approach the flux shape in fast breeder reactors. Such spectral softening means that existing radiation facilities may be more profitably used to provide relevant materials radiation damage data for the structural materials in these fusion blanket designs. This general class of blanket concepts are referred to as internal spectral shifter and energy converter, or ISSEC concepts. These specific design concepts fall into three main categories: ISSEC/EB concepts based on utilizing existing designs which breed tritium behind the first structural wall; ISSEC/IB concepts based on breeding tritium inside the first vacuum wall; and ISSEC/Bu concepts based on using boron, carbon, and perhaps, beryllium to obtain an energy multiplier and converter design that does not attempt to breed tritium or utilize lithium. The detailed analyses relate specifically to the nuclear performance of ISSEC systems and to a discussion of materials radiation damage problems in the structural material.(U.S.)

Information system of authorities of environment, legislative resources and conception

International Nuclear Information System (INIS)

Dlhosova, M.

2005-01-01

In this presentation author presents structure, legislative basis and conception of the Information system of authorities of environment (ISAE) in the Slovak Republic. The ISAE is a component part of the information system of the Slovak Environmental Agency and Ministry of Environment of the Slovak Republic. Using of new technologies is discussed

The EXTRAP concept

International Nuclear Information System (INIS)

Lehnert, D.

1976-11-01

A review is given of a recently suggested axially symmetric, quasi-steady, closed, high-beta confinement system. A toroidal pinch of non-circular cross section is supposed to be immersed in the strong, inhomogenous poloidal vacuum field from a set of ring-shaped conductors, all carrying currents in the opposite direction of the plasma current. Preliminary experiments are reported. This 'EXTRAP' concept is expected to have some important advantages, as compared to magnetic bottles based on a main toroidal field component. Concerning plasma equilibrium, there are closed local and average guiding center orbits, beta values of order unity should become available, there is no magnetic surface splitting limit, cyclotron radiation should be kept at an acceptably low level, and bootstrap operation may become possible. Concerning plasma stability, the system should not become sensitive to magnetic island formation and asymmetries, and the short magnetic connection lengths as well as the strong vacuum field gradients should favour stabilization of flute-type, kink, and other magnetohydrodynamic modes. Concerning reactor technology, high power densities are expected to be reached, superconducting coils should not become necessary, the coil stresses are moderate, and repair and replacement are facilitated by the coil geometry. Before a final judgement can be made on this concept, however, extensive experiments and further theoretical analysis are ndeeded. (Auth.)

Reliability considerations of electronics components for the deep underwater muon and neutrino detection system

International Nuclear Information System (INIS)

Leskovar, B.

1980-02-01

The reliability of some electronics components for the Deep Underwater Muon and Neutrino Detection (DUMAND) System is discussed. An introductory overview of engineering concepts and technique for reliability assessment is given. Component reliability is discussed in the contest of major factors causing failures, particularly with respect to physical and chemical causes, process technology and testing, and screening procedures. Failure rates are presented for discrete devices and for integrated circuits as well as for basic electronics components. Furthermore, the military reliability specifications and standards for semiconductor devices are reviewed

Reminiscence in dementia: a concept analysis.

Science.gov (United States)

Dempsey, Laura; Murphy, Kathy; Cooney, Adeline; Casey, Dympna; O'Shea, Eamon; Devane, Declan; Jordan, Fionnuala; Hunter, Andrew

2014-03-01

This paper is a report of an analysis of the concept of reminiscence in dementia and highlights its uses as a therapeutic intervention used on individuals with dementia. No single definition of reminiscence exists in healthcare literature; however, definitions offered have similar components. The term life review is commonly used when discussing reminiscence; however, both terms are quite different in their goals, theory base and content. This concept analysis identified reminiscence as a process which occurs in stages, involving the recalling of early life events and interaction between individuals. The antecedents of reminiscence are age, life transitions, attention span, ability to recall, ability to vocalise and stressful situations. Reminiscence can lead to positive mental health, enhanced self esteem and improved communication skills. It also facilitates preparation for death, increases interaction between people, prepares for the future and evaluates a past life. Reminiscence therapy is used extensively in dementia care and evidence shows when used effectively it helps individuals retain a sense of self worth, identity and individuality.

Apprendre et maîtriser LabVIEW par ses applications

CERN Document Server

Martaj, Nadia

2014-01-01

Cet ouvrage traite de l'apprentissage du langage LabVIEW a travers ses applications dans des domaines industriels et academiques, qui permettront a l'ingenieur, technicien ou etudiant d'apprehender rapidement et efficacement ce langage. L'ouvrage commence, dans la partie I, par traiter les differents types de donnees du langage LabVIEW (tableaux, clusters, complexes, chaines de caracteres...), leur manipulation dans des structures d'execution (boucles While, For, la structure Condition, etc.), le langage textuel MathScript, des scripts Matlab, la boite de calcul utilisant la syntaxe du langage C ainsi que les nœuds de propriete qui permettent d'obtenir ou definir la propriete d''un VI. Cette etude est menee a travers des applications d'ingenierie.La partie II est consacree a l'etude de l'outil « Conception de controle et simulation » avec lequel nous pouvons simuler des systemes analogiques ou discrets.La partie III contient differentes applications qui traitent de nombreux themes comme la regulation (diff...

Research gaps and technology needs in development of PHM for passive AdvSMR components

Energy Technology Data Exchange (ETDEWEB)

Meyer, Ryan M.; Ramuhalli, Pradeep; Hirt, Evelyn H.; Mitchell, Mark R.; Wootan, David W.; Berglin, Eric J.; Henagar, Chuck H. Jr. [Pacific Northwest National Laboratory, 902 Battelle Blvd., Richland, WA 99352 (United States); Coble, Jamie B. [University of Tennessee, Knoxville, Department of Nuclear Engineering, 315 Pasqua Engineering Building, Knoxville, TN 37996 (United States); Bond, Leonard J. [Iowa State University, Center for Nondestructive Evaluation, 1915 Scholl Rd., Ames, IA 50011 (United States)

2014-02-18

Advanced small modular reactors (AdvSMRs), which are based on modularization of advanced reactor concepts, may provide a longer-term alternative to traditional light-water reactors and near-term small modular reactors (SMRs), which are based on integral pressurized water reactor (iPWR) concepts. SMRs are challenged economically because of losses in economy of scale; thus, there is increased motivation to reduce the controllable operations and maintenance costs through automation technologies including prognostics health management (PHM) systems. In this regard, PHM systems have the potential to play a vital role in supporting the deployment of AdvSMRs and face several unique challenges with respect to implementation for passive AdvSMR components. This paper presents a summary of a research gaps and technical needs assessment performed for implementation of PHM for passive AdvSMR components.

Processing of data issued from {gamma} spectrometer. Application to the study of decay schemes; Traitement des informations issues d'un spectrometre {gamma}. Application a l'etude de schemas de desintegration

Energy Technology Data Exchange (ETDEWEB)

Boulanger, J P; Legrand, J [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

1967-07-01

The main purpose of the following report is the study of a generation method of {gamma} spectra corresponding to any energy, from a library of some basic spectra. Then we point out how to establish the decay scheme of a radio-nuclide, in using an accurate analysis of full-energy peaks which appear in its complex spectrum, followed by a generation of plain spectra corresponding to the energies of the different transitions, and ending with a least-squares fitting procedure of the complex spectrum. The accuracy of the process is examined comparing the calculated spectra to the ones issued from two kinds of spectrometers (Na I(Tl) and Ge(Li)). The method is then applied to the study of {sup 134}Cs and {sup 95}Zr - {sup 95}Nb. (authors) [French] Le present rapport a pour principal objet l'etude d'une methode de generation de spectres {gamma} correspondant a n'importe quelle energie, a partir d'une bibliotheque de quelques spectres de reference. On montre ensuite comment on peut etablir le schema de desintegration d'un radionucleide, a l'aide d'une analyse precise des pics d'absorption totale apparaissant dans son spectre complexe, suivie d'une generation des spectres simples correspondant aux energies des diverses transitions, et en terminant par une decomposition du spectre complexe par la methode des moindres carres. On examine la validite du procede en comparant les spectres calcules a ceux obtenus avec deux types de detecteurs (scintillateurs et semi-conducteurs). On applique alors la methode a l'etude du {sup 134}Cs et du {sup 95}Zr - {sup 95}Nb. (auteurs)

Double Compression Expansion Engine: A Parametric Study on a High-Efficiency Engine Concept

KAUST Repository

Bhavani Shankar, Vijai Shankar; Johansson, Bengt; Andersson, Arne

2018-01-01

The Double compression expansion engine (DCEE) concept has exhibited a potential for achieving high brake thermal efficiencies (BTE). The effect of different engine components on system efficiency was evaluated in this work using GT Power

Osmotic actuation for microfluidic components in point-of-care applications

KAUST Repository

Chen, Yu-Chih

2013-01-01

We present a novel design of micropumps and valves driven by osmotic force for point-of-care applications. Although there have been significant progresses in microfluidic components and control devices such as fluidic diodes, switches, resonators and digital-to-analog converters, the ultimate power source still depends on bulky off-chip components, which are expensive and cannot be easily miniaturized. For point-of-care applications, it is critical to integrate all the components in a compact size at low cost. In this work, we report two key active components actuated by osmotic mechanism for total integrated microfluidic system. For the proof of concept, we have demonstrated valve actuation, which can maintain stable ON/OFF switching operations under 125 kPa back pressure. We have also implemented an osmotic pump, which can pump a high flow rate over 30 μL/min for longer than 30 minutes. The experimental data demonstrates the possibility and potential of applying osmotic actuation in point-of-care disposable microfluidics. © 2013 IEEE.

Possibility of using radioactivity control measurements for determining contamination paths in nutritional vectors; Etude des possibilites d'utilisation des resultats de la surveillance de la radioactivite pour la recherche des trajectoires d'evolution de la contamination des vecteurs alimentaires

Energy Technology Data Exchange (ETDEWEB)

Garnier, A [Commissariat a l' Energie Atomique, Fontenay-aux-Roses (France). Centre d' Etudes Nucleaires

1966-07-01

The object of the report is to study the possibility of using results of radioactivity controls for determining the paths followed by contamination in nutritional vectors; these are necessary for calculating protection norms. Radioactive contamination of a nutritional vector is expressed in terms of parameters which suggest that a certain number of criteria may be used for choosing the results which are to be exploited. An actual example of a 'vertical' study based on results of measurements made purely for control purposes shows the difficulties which may be encountered. A list of the results obtained by the control networks set up in the Community Countries, either for the atmosphere, for milk, or for other foodstuffs, shows that these networks are not at the present organised in such a way as to make such a study possible. It appears desirable that a large part of the work carried out by the control Services be oriented in such a way as to yield the complementary information required for experimental studies of radioactive contamination transfers. (author) [French] L'objet du rapport est l'examen des possibilites d'utilisation des resultats de la surveillance de la radioactivite pour la recherche des trajectoires d'evolution de la contamination des vecteurs alimentaires, necessaires au calcul des niveaux de protection. La contamination radioactive d'un vecteur alimentaire s'exprime en fonction de parametres, qui suggerent de retenir un certain nombre de criteres pour la selection des resultats a exploiter. Un exemple concret d'etude 'verticale' basee sur des resultats de mesures faites uniquement dans un but de controle met en evidence les difficultes rencontrees. L'inventaire des resultats obtenus par les reseaux de controle des differents Pays de la Communaute, soit pour l'atmosphere, soit pour le lait, soit pour d'autres aliments, montre que ces reseaux ne sont pas actuellement organises de facon a permettre de telles etudes, Il parait souhaitable qu

Summary of Structural Concept Development and High Temperature Structural Integrity Evaluation Technology for a Gen-IV SFR

Energy Technology Data Exchange (ETDEWEB)

Lee, Jae Han; Joo, Young Sang; Lee, Hyeong Yeon (and others)

2008-04-15

The economic improvement is a hot issue as one of Gen IV nuclear plant goals. It requires many researches and development works to meet the goal by securing the same level of plant safety. One of the key research items is the increase of the plant capacity with the minimum number of components and loops. Through the successful conceptual design experience for the KALIMER-600, the structural design study for a 1200MWe large capacity of sodium-cooled fast reactor has been performed to achieve the above plant size effects. The component number and reactor structural sizing were determined based on the core and fluid system design information. Several researches were performed to reduce the construction cost of NSSS in structural point of view, for example, a simplified component arrangement, concept proposals of integrated components, a high temperature LBB application technology, and an innovative in-service inspection (ISI) tool, and a computer program development of the ASME-NH design procedure of the class 1 structure and component under high temperature over 500 .deg. C. The IHTS piping arrangement was also proposed to minimize the length through the properly locating the SG and pump by 126m. Further studies of these concepts are required to confirm on the fabricability and the structural integrity for the operating and design loads. The proposed concepts will be optimized to a unified conceptual design through several trade-off studies.

A study of the conformation and stability of nitroxide free radicals; Etude de la conformation et de la stabilite de radicaux libres nitroxydes

Energy Technology Data Exchange (ETDEWEB)

Briere, R [Commissariat a l' Energie Atomique, Grenoble (France). Centre d' Etudes Nucleaires

1969-03-01

les constantes de couplage des protons situes en {gamma} de l'azote ont une dependance spatiale tres marquee au meme titre que les protons situes en {beta}, ce que les etudes anterieures n'avaient pu preciser. Une analyse conformationnelle est effectuee par RMN a 310 MHz, en temperature variable. La synthese du di-t-butyl nitroxyde marque au carbone 13 en position {alpha} du groupement nitroxyde a permis de determiner avec certitude la constante d'interaction hyperfine electron carbone 13 quaternaire, grandeur qui n'avait pas ete mesuree jusqu'alors. Les constantes de couplage mesurees dans les radicaux piperidiniques tetramethyles en 2,2,6,6 ont pu etre ensuite attribuees a des carbones 13 situes en {beta} de l'azote, et leur variation a pu etre reliee a la conformation des cycles. C'est l'objet de la seconde partie. Dans un dernier chapitre, l'etude cinetique d'un radical nitroxyde instable, ayant un hydrogene en {beta}, met en evidence une decomposition bimoleculaire qui met en jeu la rupture de la liaison C-H; ceci est demontre par effet isotopique primaire. On peut conclure de cette etude qu'un nitroxyde est stable lorsque les differents groupes attaches a l'atome d'azote ne peuvent provoquer une decomposition du radical, soit intramoleculairement, si la geometrie de la molecule le permet, soit intermoleculairement par dimerisation sur un autre centre d'une molecule voisine, conduisant ainsi a une fragmentation ou a une disproportionation. (auteur)

Time Series Decomposition into Oscillation Components and Phase Estimation.

Science.gov (United States)

Matsuda, Takeru; Komaki, Fumiyasu

2017-02-01

Many time series are naturally considered as a superposition of several oscillation components. For example, electroencephalogram (EEG) time series include oscillation components such as alpha, beta, and gamma. We propose a method for decomposing time series into such oscillation components using state-space models. Based on the concept of random frequency modulation, gaussian linear state-space models for oscillation components are developed. In this model, the frequency of an oscillator fluctuates by noise. Time series decomposition is accomplished by this model like the Bayesian seasonal adjustment method. Since the model parameters are estimated from data by the empirical Bayes' method, the amplitudes and the frequencies of oscillation components are determined in a data-driven manner. Also, the appropriate number of oscillation components is determined with the Akaike information criterion (AIC). In this way, the proposed method provides a natural decomposition of the given time series into oscillation components. In neuroscience, the phase of neural time series plays an important role in neural information processing. The proposed method can be used to estimate the phase of each oscillation component and has several advantages over a conventional method based on the Hilbert transform. Thus, the proposed method enables an investigation of the phase dynamics of time series. Numerical results show that the proposed method succeeds in extracting intermittent oscillations like ripples and detecting the phase reset phenomena. We apply the proposed method to real data from various fields such as astronomy, ecology, tidology, and neuroscience.

Etude theorique et experimentale des evaporateurs de dioxyde de carbone operant dans des conditions de givrage

Science.gov (United States)

Bendaoud, Adlane Larbi

Les evaporateurs de refrigeration sont surtout du type tube a ailettes, appeles serpentins, et fonctionnent dans l'une des conditions suivantes: seche, humide ou avec formation de givre. Il a ete demontre que la formation du givre sur la paroi exterieure de l'echangeur engendre une surconsommation energetique a cause des operations de degivrage puisque 15 a 20% seulement de la chaleur produite sert au degivrage tandis que le reste est dissipee dans l'environnement [1]. Avec l'avenement des nouveaux refrigerants, moins nocifs envers l'environnement, l'industrie du froid se trouve penalisee du fait que peu ou pas de composantes mecaniques (compresseur, pompe, echangeur...etc.) adaptees sont disponibles [3]. Il s'agit pour la communaute des frigoristes de combler ce retard technologique en redeveloppant ces composantes mecaniques afin qu'elles soient adaptees aux nouveaux refrigerants. Dans cette optique, et afin de mieux comprendre le comportement thermique des evaporateurs au CO2 fonctionnant dans des conditions seches, qu'un groupe de chercheurs du CanmetENERGIE avaient lance, en 2000, un programme de R & D. Dans le cadre de programme un outil de simulation des evaporateurs au CO2 a ete developpe et un banc d'essai contenant une boucle secondaire de refrigeration utilisant le CO2 comme refrigerant a ete construit. Comme continuite de ce travail de recherche, en 2006 ce meme groupe de recherche a lance un nouveau projet qui consiste a faire une etude theorique et experimentale des evaporateurs au CO2 operants dans des conditions de givrage. Et, c'est exactement dans le cadre de ce projet que se positionne ce travail de these. Ce travail de recherche a ete entrepris pour mieux comprendre le comportement thermique et hydrodynamique des serpentins fonctionnant dans des conditions de givrage, l'effet des circuits de refrigerant ainsi que celui des parametres geometriques et d'operation. Pour cela, un travail theorique supporte par une etude experimentale a ete effectue

Prognostics for Microgrid Components

Science.gov (United States)

Saxena, Abhinav

2012-01-01

Prognostics is the science of predicting future performance and potential failures based on targeted condition monitoring. Moving away from the traditional reliability centric view, prognostics aims at detecting and quantifying the time to impending failures. This advance warning provides the opportunity to take actions that can preserve uptime, reduce cost of damage, or extend the life of the component. The talk will focus on the concepts and basics of prognostics from the viewpoint of condition-based systems health management. Differences with other techniques used in systems health management and philosophies of prognostics used in other domains will be shown. Examples relevant to micro grid systems and subsystems will be used to illustrate various types of prediction scenarios and the resources it take to set up a desired prognostic system. Specifically, the implementation results for power storage and power semiconductor components will demonstrate specific solution approaches of prognostics. The role of constituent elements of prognostics, such as model, prediction algorithms, failure threshold, run-to-failure data, requirements and specifications, and post-prognostic reasoning will be explained. A discussion on performance evaluation and performance metrics will conclude the technical discussion followed by general comments on open research problems and challenges in prognostics.

Towards an agential realist concept of learning

DEFF Research Database (Denmark)

Plauborg, Helle

2018-01-01

Drawing on agential realism, this article explores how learning can be understood. An agential realist way of thinking about learning is sensitive to the complexity that characterises learning as a phenomenon. Thus, learning is seen as a dynamic and emergent phenomenon, constantly undergoing...... processes of becoming and expanding the range of components involved in such constitutive processes. With inspiration from Barad’s theorisation of spatiality, temporality and the interdependence of discourse and materiality, this article focuses on timespacemattering and material-discursivity. Concepts...

Conception of modular hydrogen storage systems for portable applications

International Nuclear Information System (INIS)

Paladini, V.; Miotti, P.; Manzoni, G.; Ozebec, J.

2003-01-01

Hydrogen, till now the most prominent candidate as a future sustainable energy carrier, yields a gravimetric energy density three times as high as liquid hydrocarbon. Furthermore it is proven to be the most environmentally friendly fuel. Unfortunately, a few components regarding storage and tank solutions have not yet reached a technology level required for broad use. Thus, we intend to propose solutions and device concepts for both devices everyday use and space applications. This contribution assesses both state of the art of storage materials and existing technologies of power generation systems for application in portable devices. The aim of this work is to define the characteristics of a modular system, being suitable for a wide range of different devices, operating on advanced metal hydrides as the active hydrogen supply component. The concept has been studied and modelled with respect to volumes, mass and power requirements of different devices. The smallest system developed is intended to run, for example, a mobile phone. Minor tuning and straightforward scale up of this power supply module should make it suitable for general applicability in any portable device. (author)

Innatism, Concept Formation, Concept Mastery and Formal Education

Science.gov (United States)

Winch, Christopher

2015-01-01

This article will consider the claim that the possession of concepts is innate rather than learned. Innatism about concept learning is explained through consideration of the work of Fodor and Chomsky. First, an account of concept formation is developed. Second the argument against the claim that concepts are learned through the construction of a…

Self-Concept and Sport Participation in Sixth Grade Basic School Students

Directory of Open Access Journals (Sweden)

Špela Virag

2016-04-01

Full Text Available The purpose of the study was to examine self-concept in relation to sport participation among basic school children. The sample included 109 sixth grade students of different Slovenian basic schools. The participants completed the Slovenian version of the SelfPerception Profile for Children – SPPC. The results show significant gender differences in some specific components of self-concept. Boys exhibited higher scores in perceived physical appearance and athletic competence, whereas girls exhibited higher levels in perceived behavioural conduct. Mean values show that students, engaged in organized sport practice, reported higher scores in all self-concept subscales than their inactive peers, although significant differences between these two groups were found in perceived scholastic competence and athletic competence. The study offers a detailed insight into the multidimensional self-perceptions of sixth grade basic school students. The results highlight the importance of physical/sports activity in the self-concept development and can be useful in promoting an active lifestyle among youth.

Relative and absolute components of leapfrogging in mobile phones by developing countries

NARCIS (Netherlands)

James, M.J.

This paper suggests a novel way of measuring the important concept of leapfrogging in mobile phones. It argues that an adequate measure of leapfrogging needs to include absolute as well as relative components. The new measure is used to measure the performance of around 60 developing countries and

Simple fall criteria for MEMS sensors: Data analysis and sensor concept

KAUST Repository

Ibrahim, Alwathiqbellah; Younis, Mohammad I.

2014-01-01

This paper presents a new and simple fall detection concept based on detailed experimental data of human falling and the activities of daily living (ADLs). Establishing appropriate fall algorithms compatible with MEMS sensors requires detailed data on falls and ADLs that indicate clearly the variations of the kinematics at the possible sensor node location on the human body, such as hip, head, and chest. Currently, there is a lack of data on the exact direction and magnitude of each acceleration component associated with these node locations. This is crucial for MEMS structures, which have inertia elements very close to the substrate and are capacitively biased, and hence, are very sensitive to the direction of motion whether it is toward or away from the substrate. This work presents detailed data of the acceleration components on various locations on the human body during various kinds of falls and ADLs. A two-degree-of-freedom model is used to help interpret the experimental data. An algorithm for fall detection based on MEMS switches is then established. A new sensing concept based on the algorithm is proposed. The concept is based on employing several inertia sensors, which are triggered simultaneously, as electrical switches connected in series, upon receiving a true fall signal. In the case of everyday life activities, some or no switches will be triggered resulting in an open circuit configuration, thereby preventing false positive. Lumped-parameter model is presented for the device and preliminary simulation results are presented illustrating the new device concept. © 2014 by the authors; licensee MDPI, Basel, Switzerland.

Simple fall criteria for MEMS sensors: Data analysis and sensor concept

KAUST Repository

Ibrahim, Alwathiqbellah

2014-07-08

This paper presents a new and simple fall detection concept based on detailed experimental data of human falling and the activities of daily living (ADLs). Establishing appropriate fall algorithms compatible with MEMS sensors requires detailed data on falls and ADLs that indicate clearly the variations of the kinematics at the possible sensor node location on the human body, such as hip, head, and chest. Currently, there is a lack of data on the exact direction and magnitude of each acceleration component associated with these node locations. This is crucial for MEMS structures, which have inertia elements very close to the substrate and are capacitively biased, and hence, are very sensitive to the direction of motion whether it is toward or away from the substrate. This work presents detailed data of the acceleration components on various locations on the human body during various kinds of falls and ADLs. A two-degree-of-freedom model is used to help interpret the experimental data. An algorithm for fall detection based on MEMS switches is then established. A new sensing concept based on the algorithm is proposed. The concept is based on employing several inertia sensors, which are triggered simultaneously, as electrical switches connected in series, upon receiving a true fall signal. In the case of everyday life activities, some or no switches will be triggered resulting in an open circuit configuration, thereby preventing false positive. Lumped-parameter model is presented for the device and preliminary simulation results are presented illustrating the new device concept. © 2014 by the authors; licensee MDPI, Basel, Switzerland.

The conception of the family in the realm of Lithuanian family policy

Directory of Open Access Journals (Sweden)

VILIJA TARMAGADZĖ

2017-10-01

Full Text Available Th e family, its conceptualization and functioning, as well as family policy are discussed at the personal, community and state level. Th is makes sense because diff erent cultural, historical, ethical, social and other alternations aff ect the assessment and evaluation of these three signifi cant components. Besides family policy is a very important part of public policy in a state, what makes obvious impact on every human life (even those who are living not in a family. Th e aim of this article is to shed light on theconcept of family, family functioning and family policy as three mutually interacting components in a unifi ed narrative. Th e object of study is the concept of family, family functioning and family policy from the perspective of its content. Th e research methods employed include analysis and design of scientifi c literature and documents. Th e article analyzes the defi nition of family, paying particular attention that diff erent authors present various defi nitions of families. Although these defi nitions focus on different aspects of families (e.g. marriage, community, the continuity of the nation, etc., it is shown that in each country the concept of a family is regulated by laws, by which regulations (and other legal documents are prepared. Th e legal concept of a family in Lithuania is still not entirely clear. Th e concept is not defi ned in the Constitution and marriage is not indicated as an obvious attribute of being a family. Meanwhile,the FamilyPolicyConcept(2008 clearly defi nes a family,indicatingthat marriage is necessarily between a manand a woman. Th e recognition of families only by marriage has raised many discussions among politicians, particular public interest groups and private individuals in Lithuania. Th ese discussions became even stronger when the Constitutional Court stated that the FamilyPolicyConcept(2008 contradicts the Constitution of Lithuania. Having in the mind, that the implementation of family

Formal and nonformal education: an expenence on concept formation

Directory of Open Access Journals (Sweden)

Maria Victoria BENÍTEZ ROCA

2009-11-01

Full Text Available This article is aimed at exploring the existing relationships between the logical structures and the intellective components which underlie in the configuration of the ideas and the concepts transmitted by formal and nonformal education on 6-7 years old subjects. The «school» concepts analyzed through drawing and language, achieving several conclusions. The most important one is that there is a reduction in the field of graphical representation with regards to the linguistic formulation of the concept: more general concerning its representation and more concrete with respect to its formulation; more according to reality at the linguistic level than at the pictorial one. What is more, throughout the accomplished analysis, the influence exerted by adults (mainly relatives and other nonformal education media (television, tales, videotapes, and the like is verified on the subjects under consideration. The influence of the formal education on the concept construction, although it is lesser than the nonformal one, is determined by the methodology used by the pupils' tutor, so that methodology has set up the basis in order to create the favourable conditions to achieve the teaching-learning process from the principles of modern educational psycology.

Psychometrics of the Laffrey Health Conception Scale for adolescents.

Science.gov (United States)

Yarcheski, Adela; Mahon, Noreen E; Yarcheski, Thomas J

2005-01-01

The purposes of this methodological study were to factor analyze the Laffrey Health Conception Scale (LHCS) and to assess construct validity of the instrument with early adolescents. The final sample consisted of 230 early adolescents, aged 12 to 14, who responded to instrument packets in classrooms in an urban middle school. Data obtained on the LHCS were subjected to principal components factor analysis with oblique rotation. A two-factor solution was accepted, which is consistent with early adolescents' conceptions of health. Factor I was labeled Wellness and Factor II was labeled Clinical Health. A higher order factor analysis yielded one factor with 26 items, labeled the LHCS for Early Adolescents. The 26-item LHCS had a coefficient alpha of .95. Construct validity was assessed by testing three theoretical propositions, which significantly linked health conception to social support, self-esteem, and positive health practices. The findings indicate that the LHCS is a reliable and valid measure of health conceptions in early adolescents. Results also offer flexibility to researchers interested in testing theory involving the constructs of the definition of health, wellness, and clinical health in early adolescents.

CFC/Cu bond damage in actively cooled plasma facing components

International Nuclear Information System (INIS)

Schlosser, J; Martin, E; Henninger, C; Boscary, J; Camus, G; Escourbiac, F; Leguillon, D; Missirlian, M; Mitteau, R

2007-01-01

Carbon fibre composite (CFC) armours have been successfully used for actively cooled plasma facing components (PFCs) of the Tore Supra (TS) tokamak. They were also selected for the divertor of the stellarator W7-X under construction and for the vertical target of the ITER divertor. In TS and W7-X a flat tile design for heat fluxes of 10 MW m -2 has been chosen. To predict the lifetime of such PFCs, it is necessary to analyse the damage mechanisms and to model the damage propagation when the component is exposed to thermal cycling loads. Work has been performed to identify a constitutive law for the CFC and parameters to model crack propagation from the edge singularity. The aim is to predict damage rates and to propose geometric or material improvements to increase the strength and the lifetime of the interfacial bond. For ITER a tube-in-tile concept (monoblock), designed to sustain heat fluxes up to 20 MW m -2 , has been developed. The optimization of the CFC/Cu bond, proposed for flat tiles, could be adopted for the monoblock concept

Towards a Component Based Model for Database Systems

Directory of Open Access Journals (Sweden)

Octavian Paul ROTARU

2004-02-01

Full Text Available Due to their effectiveness in the design and development of software applications and due to their recognized advantages in terms of reusability, Component-Based Software Engineering (CBSE concepts have been arousing a great deal of interest in recent years. This paper presents and extends a component-based approach to object-oriented database systems (OODB introduced by us in [1] and [2]. Components are proposed as a new abstraction level for database system, logical partitions of the schema. In this context, the scope is introduced as an escalated property for transactions. Components are studied from the integrity, consistency, and concurrency control perspective. The main benefits of our proposed component model for OODB are the reusability of the database design, including the access statistics required for a proper query optimization, and a smooth information exchange. The integration of crosscutting concerns into the component database model using aspect-oriented techniques is also discussed. One of the main goals is to define a method for the assessment of component composition capabilities. These capabilities are restricted by the component’s interface and measured in terms of adaptability, degree of compose-ability and acceptability level. The above-mentioned metrics are extended from database components to generic software components. This paper extends and consolidates into one common view the ideas previously presented by us in [1, 2, 3].[1] Octavian Paul Rotaru, Marian Dobre, Component Aspects in Object Oriented Databases, Proceedings of the International Conference on Software Engineering Research and Practice (SERP’04, Volume II, ISBN 1-932415-29-7, pages 719-725, Las Vegas, NV, USA, June 2004.[2] Octavian Paul Rotaru, Marian Dobre, Mircea Petrescu, Integrity and Consistency Aspects in Component-Oriented Databases, Proceedings of the International Symposium on Innovation in Information and Communication Technology (ISIICT�

Hyperfine coupling in gadolinium-praseodymium alloys by specific heat measurements; Etude du couplage hyperfin dans les alliages gadolinium-praseodyme par mesures de chaleur specifique

Energy Technology Data Exchange (ETDEWEB)

Michel, J [Commissariat a l' Energie Atomique, Grenoble (France). Centre d' Etudes Nucleaires

1967-12-01

We have studied the hyperfine coupling in gadolinium-praseodymium alloys by specific heat measurements down to 0.3 K. In the first part we describe the apparatus used to perform our measurements. The second part is devoted to some theoretical considerations. We have studied in detail the case of praseodymium which is an exception in the rare earth series. The third part shows the results we have obtained. (author) [French] Nous avons etudie le couplage hyperfin d'alliages de gadolinium-praseodyme par des mesures de chaleur specifique jusqu'a 0.3 K. Dans la premiere partie de cette etude nous decrivons le dispositif experimental. La deuxieme partie est consacree a des considerations theoriques. Nous avons etudie en detail le cas du praseodyme qui est une exception dans la serie des terres rares. La troisieme partie est consacree aux resultats experimentaux. (auteur)

Self-Concept Is a Concept Worth Considering

Science.gov (United States)

Shields, Nora

2009-01-01

There is a growing recognition of the importance of self-concept in the pediatric rehabilitation research literature. There also is confusion and inconsistency in the definitions of and the terminology used to describe self-concept. What is agreed is that self-concept is multidimensional, comprising a child's perception of their personal…

Fission Surface Power System Initial Concept Definition

Science.gov (United States)

2010-01-01

Under the NASA Exploration Technology Development Program (ETDP) and in partnership with the Department of Energy (DOE), NASA has embarked on a project to develop Fission Surface Power (FSP) technology. The primary goals of the project are to 1) develop FSP concepts that meet expected surface power requirements at reasonable cost with added benefits over other options, 2) establish a hardwarebased technical foundation for FSP design concepts and reduce overall development risk, 3) reduce the cost uncertainties for FSP and establish greater credibility for flight system cost estimates, and 4) generate the key products to allow NASA decision-makers to consider FSP as a preferred option for flight development. The FSP project was initiated in 2006 as the Prometheus Program and the Jupiter Icy Moons Orbiter (JIMO) mission were phased-out. As a first step, NASA Headquarters commissioned the Affordable Fission Surface Power System Study to evaluate the potential for an affordable FSP development approach. With a cost-effective FSP strategy identified, the FSP team evaluated design options and selected a Preliminary Reference Concept to guide technology development. Since then, the FSP Preliminary Reference Concept has served as a point-of-departure for several NASA mission architecture studies examining the use of nuclear power and has provided the foundation for a series of "Pathfinder" hardware tests. The long-term technology goal is a Technology Demonstration Unit (TDU) integrated system test using full-scale components and a non-nuclear reactor simulator. The FSP team consists of Glenn Research Center (GRC), Marshall Space Flight Center (MSFC) and the DOE National Laboratories at Los Alamos (LANL), Idaho (INL), Oak Ridge (ORNL), and Sandia (SNL). The project is organized into two main elements: Concept Definition and Risk Reduction. Under Concept Definition, the team performs trade studies, develops analytical tools, and formulates system concepts. Under Risk

Architecture, Voltage, and Components for a Turboelectric Distributed Propulsion Electric Grid

Science.gov (United States)

Armstrong, Michael J.; Blackwelder, Mark; Bollman, Andrew; Ross, Christine; Campbell, Angela; Jones, Catherine; Norman, Patrick

2015-01-01

The development of a wholly superconducting turboelectric distributed propulsion system presents unique opportunities for the aerospace industry. However, this transition from normally conducting systems to superconducting systems significantly increases the equipment complexity necessary to manage the electrical power systems. Due to the low technology readiness level (TRL) nature of all components and systems, current Turboelectric Distributed Propulsion (TeDP) technology developments are driven by an ambiguous set of system-level electrical integration standards for an airborne microgrid system (Figure 1). While multiple decades' worth of advancements are still required for concept realization, current system-level studies are necessary to focus the technology development, target specific technological shortcomings, and enable accurate prediction of concept feasibility and viability. An understanding of the performance sensitivity to operating voltages and an early definition of advantageous voltage regulation standards for unconventional airborne microgrids will allow for more accurate targeting of technology development. Propulsive power-rated microgrid systems necessitate the introduction of new aircraft distribution system voltage standards. All protection, distribution, control, power conversion, generation, and cryocooling equipment are affected by voltage regulation standards. Information on the desired operating voltage and voltage regulation is required to determine nominal and maximum currents for sizing distribution and fault isolation equipment, developing machine topologies and machine controls, and the physical attributes of all component shielding and insulation. Voltage impacts many components and system performance.

Robert M. Gagne and M. David Merrill: In Conversation. No. 3: An Overview of M. David Merrill's New Component Design Theory.

Science.gov (United States)

Twitchell, David, Ed.

1990-01-01

This third in a series of edited transcripts based on a conference at Utah State University describes Merrill's Component Design Theory (CDT) and compares it to his earlier Component Display Theory. Topics discussed include concept structures, knowledge acquisition, components of an instructional design system, and a new CDT matrix. (10…

IT-tool Concept for Design and Intelligent Motion Control

DEFF Research Database (Denmark)

Conrad, Finn; Hansen, Poul Erik; Sørensen, Torben

2000-01-01

The paper presents results obtained from a Danish mechatronic research program focusing on intelligent motion control as well as results from the Esprit project SWING on IT-tools for rapid prototyping of fluid power components and systems. A mechatronic test facility with digital controllers for ....... Furthermore, a developed IT-tool concept for controller and system design utilising the ISO 10303 STEP Standard is proposed....

SLAM: a fast high volume additive manufacturing concept by impact welding; application to Ti6Al4V alloy

NARCIS (Netherlands)

Wentzel, C.M.; Carton, E.P.; Kloosterman, A.

2006-01-01

Against the manufacturing requirement for both lower lead time and reduced machining time for titanium components, a new concept was conceived assembling sheet material and other stock into semi finished parts by (explosive) impact welding. It is believed that this concept (which we named SLAM)

A CONCEPT OF SOFTWARE SUPPORT OF LEARNING PROGRAMMING LANGUAGE AND TECHNOLOGIES

Directory of Open Access Journals (Sweden)

V. Kruglyk

2013-03-01

Full Text Available A concept of software support of learning programming language and technologies is regarded in the article. Present systems of independent study of subjects, related to programming, are examined. Necessary components of a system of support learning programming languages and technologies, which is oriented on independent study, are considered.

Component Data Base for Space Station Resistojet Auxiliary Propulsion

Science.gov (United States)

Bader, Clayton H.

1988-01-01

The resistojet was baselined for Space Station auxiliary propulsion because of its operational versatility, efficiency, and durability. This report was conceived as a guide to designers and planners of the Space Station auxiliary propulsion system. It is directed to the low thrust resistojet concept, though it should have application to other station concepts or systems such as the Environmental Control and Life Support System (ECLSS), Manufacturing and Technology Laboratory (MTL), and the Waste Fluid Management System (WFMS). The information will likely be quite useful in the same capacity for other non-Space Station systems including satellite, freeflyers, explorers, and maneuvering vehicles. The report is a catalog of the most useful information for the most significant feed system components and is organized for the greatest convenience of the user.

Genetic cytological and biochemical study of a tomato chlorophyll mutant of the xanthic type, obtained by irradiation of the seeds; Etude genetique, cytologique et biochimique d'un mutant chlorophyllien de tomate du type xantha, obtenu par irradiation de graines

Energy Technology Data Exchange (ETDEWEB)

Lefort, M; Duranton, J; Galmiche, J M; Roux, E [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

1958-07-01

Irradiation of Lycopersicum aesculantum seeds with increasing doses of X-rays and thermal neutrons leads to the appearance of chlorophyll mutations in the descendants of the irradiated seeds. A genetic study of one of these mutants of the xanthic type showed that it was a recessive mutant with typical mono-genetic separation, while the cytological study demonstrated that the differentiation of the plast stopped at the stage of elementary lamella. Finally it is shown that in the light, the mutation brings about a very large deviation of the carbon metabolism towards the synthesis of amino acids and proteins, at the expense of that of glucosides. (author) [French] L'irradiation de graines de Lycopersicum Aesculantum avec des doses croissantes de rayons X et de neutrons thermiques entraine l'apparition de mutations chlorophylliennes dans la descendance des graines irradiees. L'etude genetique d'un de ces mutants du type xantha a montre qu'il s'agissait d'un mutant recessif a disjonction monogenique typique, tandis que l'etude cytologique a revele que la differentiation du plaste s'arretait au stade de lamelles elementaires. Il est apparu enfin qu'a la lumiere la mutation entrainait une deviation tres importante du metabolisme du carbone vers la synthese des acides amines et des proteines, au detriment de celle des glucides. (auteur)

In-vacuum sensors for the beamline components of the ITER neutral beam test facility

Energy Technology Data Exchange (ETDEWEB)

Dalla Palma, M., E-mail: mauro.dallapalma@igi.cnr.it; Pasqualotto, R.; Spagnolo, S.; Spolaore, M. [Consorzio RFX, Padova 35127 (Italy); Sartori, E. [Consorzio RFX, Padova 35127 (Italy); Università degli Studi di Padova, Padova 35122 (Italy); Veltri, P. [Consorzio RFX, Padova 35127 (Italy); INFN-LNL, Legnaro (PD) 35020 (Italy)

2016-11-15

Embedded sensors have been designed for installation on the components of the MITICA beamline, the prototype ITER neutral beam injector (Megavolt ITER Injector and Concept Advancement), to derive characteristics of the particle beam and to monitor the component conditions during operation for protection and thermal control. Along the beamline, the components interacting with the particle beam are the neutralizer, the residual ion dump, and the calorimeter. The design and the positioning of sensors on each component have been developed considering the expected beam-surface interaction including non-ideal and off-normal conditions. The arrangement of the following instrumentation is presented: thermal sensors, strain gages, electrostatic probes including secondary emission detectors, grounding shunt for electrical currents, and accelerometers.

Engineered barrier system and waste package design concepts for a potential geologic repository at Yucca Mountain

International Nuclear Information System (INIS)

Short, D.W.; Ruffner, D.J.; Jardine, L.J.

1991-10-01

We are using an iterative process to develop preliminary concept descriptions for the Engineered Barrier System and waste-package components for the potential geologic repository at Yucca Mountain. The process allows multiple design concepts to be developed subject to major constraints, requirements, and assumptions. Involved in the highly interactive and interdependent steps of the process are technical specialists in engineering, metallic and nonmetallic materials, chemistry, geomechanics, hydrology, and geochemistry. We have developed preliminary design concepts that satisfy both technical and nontechnical (e.g., programmatic or policy) requirements

Estimation of component failure probability from masked binomial system testing data

International Nuclear Information System (INIS)

Tan Zhibin

2005-01-01

The component failure probability estimates from analysis of binomial system testing data are very useful because they reflect the operational failure probability of components in the field which is similar to the test environment. In practice, this type of analysis is often confounded by the problem of data masking: the status of tested components is unknown. Methods in considering this type of uncertainty are usually computationally intensive and not practical to solve the problem for complex systems. In this paper, we consider masked binomial system testing data and develop a probabilistic model to efficiently estimate component failure probabilities. In the model, all system tests are classified into test categories based on component coverage. Component coverage of test categories is modeled by a bipartite graph. Test category failure probabilities conditional on the status of covered components are defined. An EM algorithm to estimate component failure probabilities is developed based on a simple but powerful concept: equivalent failures and tests. By simulation we not only demonstrate the convergence and accuracy of the algorithm but also show that the probabilistic model is capable of analyzing systems in series, parallel and any other user defined structures. A case study illustrates an application in test case prioritization

Science Curriculum Components Favored by Taiwanese Biology Teachers

Science.gov (United States)

Lin, Chen-Yung; Hu, Reping; Changlai, Miao-Li

2005-09-01

The new 1-9 curriculum framework in Taiwan provides a remarkable change from previous frameworks in terms of the coverage of content and the powers of teachers. This study employs a modified repertory grid technique to investigate biology teachers' preferences with regard to six curriculum components. One hundred and eighty-five in-service and pre-service biology teachers were asked to determine which science curriculum components they liked and disliked most of all to include in their biology classes. The data show that the rank order of these science curriculum components, from top to bottom, was as follows: application of science, manipulation skills, scientific concepts, social/ethical issues, problem-solving skills, and the history of science. They also showed that pre-service biology teachers, as compared with in-service biology teachers, favored problem-solving skills significantly more than manipulative skills, while in-service biology teachers, as compared with pre-service biology teachers, favored manipulative skills significantly more than problem-solving skills. Some recommendations for ensuring the successful implementation of the Taiwanese 1-9 curriculum framework are also proposed.

State of the science of maternal-infant bonding: a principle-based concept analysis.

Science.gov (United States)

Bicking Kinsey, Cara; Hupcey, Judith E

2013-12-01

to provide a principle-based analysis of the concept of maternal-infant bonding. principle-based method of concept analysis for which the data set included 44 articles published in the last decade from Pubmed, CINAHL, and PyschINFO/PsychARTICLES. literature inclusion criteria were English language, articles published in the last decade, peer-reviewed journal articles and commentary on published work, and human populations. after a brief review of the history of maternal-infant bonding, a principle-based concept analysis was completed to examine the state of the science with regard to this concept. The concept was critically examined according to the clarity of definition (epistemological principle), applicability of the concept (pragmatic principle), consistency in use and meaning (linguistic principle), and differentiation of the concept from related concepts (logical principle). Analysis of the concept revealed: (1) Maternal-infant bonding describes maternal feelings and emotions towards her infant. Evidence that the concept encompasses behavioural or biological components was limited. (2) The concept is clearly operationalised in the affective domain. (3) Maternal-infant bonding is linguistically confused with attachment, although the boundaries between the concepts are clearly delineated. despite widespread use of the concept, maternal-infant bonding is at times superficially developed and subject to confusion with related concepts. Concept clarification is warranted. A theoretical definition of the concept of maternal-infant bonding was developed to aid in the clarification, but more research is necessary to further clarify and advance the concept. nurse midwives and other practitioners should use the theoretical definition of maternal-infant bonding as a preliminary guide to identification and understanding of the concept in clinical practice. Copyright © 2013 Elsevier Ltd. All rights reserved.

Mengembangkan Self Concept Siswa Melalui Model Pembelajaran Concept Attainment

OpenAIRE

Sumartini, Tina Sri

2015-01-01

Dalam pembelajaran matematika, siswa masih kurang memiliki self concept yang positif. Salah satu model pembelajaran yang dapat diterapkan untuk mengembangkan self concept siswa adalah model concept attainment. Tujuan penelitian ini adalah untuk mengetahui perkembangan self concept siswa setelah mendapatkan model pembelajaran concept attainment. Penelitian ini berbentuk one shot case study. Populasi dalam penelitian ini adalah siswa di salah satu SMK di Kabupaten Garut. Pengambilan sampel d...

An ontology for component-based models of water resource systems

Science.gov (United States)

Elag, Mostafa; Goodall, Jonathan L.

2013-08-01

Component-based modeling is an approach for simulating water resource systems where a model is composed of a set of components, each with a defined modeling objective, interlinked through data exchanges. Component-based modeling frameworks are used within the hydrologic, atmospheric, and earth surface dynamics modeling communities. While these efforts have been advancing, it has become clear that the water resources modeling community in particular, and arguably the larger earth science modeling community as well, faces a challenge of fully and precisely defining the metadata for model components. The lack of a unified framework for model component metadata limits interoperability between modeling communities and the reuse of models across modeling frameworks due to ambiguity about the model and its capabilities. To address this need, we propose an ontology for water resources model components that describes core concepts and relationships using the Web Ontology Language (OWL). The ontology that we present, which is termed the Water Resources Component (WRC) ontology, is meant to serve as a starting point that can be refined over time through engagement by the larger community until a robust knowledge framework for water resource model components is achieved. This paper presents the methodology used to arrive at the WRC ontology, the WRC ontology itself, and examples of how the ontology can aid in component-based water resources modeling by (i) assisting in identifying relevant models, (ii) encouraging proper model coupling, and (iii) facilitating interoperability across earth science modeling frameworks.

The Role of a Multidimensional Concept of Trust in the Performance of Global Virtual Teams

Science.gov (United States)

Bodensteiner, Nan Muir; Stecklein, Jonette M.

2002-01-01

This paper focuses on the concept of trust as an important ingredient of effective global virtual team performance. Definitions of trust and virtual teams are presented. The concept of trust is developed from its unilateral application (trust, absence of trust) to a multidimensional concept including cognitive and affective components. The special challenges of a virtual team are then discussed with particular emphasis on how a multidimensional concept of trust impacts these challenges. Propositions suggesting the multidimensional concept of trust moderates the negative impacts of distance, cross cultural and organizational differences, the effects of electronically mediated communication, reluctance to share information and a lack of hi story/future on the performance of virtual teams are stated. The paper concludes with recommendations and a set of techniques to build both cognitive and affective trust in virtual teams.

Study of the improvement of the radioprotective power of imidazole; Etude de l'amelioration du pouvoir radioprotecteur de l'imidazole

Energy Technology Data Exchange (ETDEWEB)

Mourret, A; Rinaldi, R [Commissariat a l' Energie Atomique, 38 - Grenoble (France). Centre d' Etudes Nucleaires

1968-07-01

In studies made on the Imidazole radioprotective power, the authors have attempted to neutralize its convulsive properties by the Depamide so as to decrease drug toxicity. Then, having studied in what manner the two products simultaneous action could carry one increase of radioprotective activity, they have established that if the Depamide permits to decrease very much the Imidazole toxicity, the variation of radioprotection power which is subject to animal sex, generally increases for females and decreases for males. (authors) [French] Dans le cadre de l'etude du pouvoir radioprotecteur de l'Imidazole, les auteurs ont essaye de neutraliser les proprietes convulsivantes de cette substance par le Depamide afin d'en dimunuer la toxicite. Ayant ensuite etudie dans quelle mesure l'action simultanee de ces deux produits pouvait apporter une amelioration de l'activite radioprotectrice, ils ont constate que si le Depamide permet de diminuer tres sensiblement la toxicite de l'Imidazole, la variation du pouvoir radioprotecteur, qui depend du sexe de l'animal, augmente en general pour les femelles et diminue pour les males. (auteurs)

The Structures of the Alternative Conceptions of Preservice Secondary Teachers on Seasonal Changes

Directory of Open Access Journals (Sweden)

Junyoung Oh

2005-03-01

Full Text Available This study was to understand the components that influence preservice secondary teachers' conceptions about "seasonal changes". We selected 74 university science education students among whom 23 were in the second, 23 in the third, and 28 in the fourth year. The data collected from the paper-pencil test and individual interview with students. The results of this study show that the students had considerable apparent alternative conceptions, and that the 'distance theory' had most important effects on their alternative conceptions. It can be said that preservice secondary teachers' initial models of the seasonal change have their origin in their belief sets (specific theory related to 'seasonal change', on the basis of which they can interpret their observations and cultural information with the constraints of a naive framework of physics. The structures and possible sources of their alternative conceptions for overcoming these alternative conceptions were also discussed. Implications for preservice science teacher education related to the results were discussed.

Application of the integrated blanket-coil concept (IBC) to fusion reactors

International Nuclear Information System (INIS)

Embrechts, M.J.; Steiner, D.; Mohanti, R.; Duggan, W.

1987-01-01

A novel concept is proposed for combining the blanket and coil functions of a fusion reactor into a single component and several unique applications to fusion reactor embodiments are identified. The proposed concept takes advantage of the fact that lithium is a good electrical conductor in addition to being a unique tritium-breeding material capable of energy recovery and transport at high temperatures. This concept, designated the ''integrated-blanket-coil (IBC) concept'' has the potential for: allowing fusion reactor embodiments which are easier to maintain; making fusion reactors more compact with an intrinsic ultra-high mass power density (net kW/sub E//metric tonne); and enhancing the tritium breeding potential for special coil applications such as ohmic heating and bean identation. By assuming a sandwich construction for the IBC walls (i.e., a layered combination of a thin wall of structural material, insulator and structural materials) the magnetohydrodynamic (MHD)-induced pressure drops and associated pressure stresses are modest and well below design limits. Possible unique applications of the IBC concept have been investigated and include the IBC concept applied to the poloidal field (PF) coils, toroidal field (TF) coils, divertor coils, ohmic heating (OH) coils, and identation coils for bean shaping

Empowerment of family caregivers of adults and elderly persons: A concept analysis.

Science.gov (United States)

Sakanashi, Sayori; Fujita, Kimie

2017-10-01

This concept analysis defined and described the components of empowerment of family caregivers who care for adults and the elderly. Rodgers evolutionary method of concept analysis was used. Data sources included Pub Med, CINAHL, Scopus, and Igaku Chuo Zasshi. Thirty articles published between 1995 and 2015 focusing on the empowerment of family caregivers providing care to adults and the elderly were selected. The analysis reveals 6 attributes, 5 antecedents, and 5 consequences. In addition, the results reveal structured aspects of family caregivers, care receivers, and other people surrounding them, and their relationships. Empowerment of adults' and elders' family caregivers may be defined as "positive control of one's mind and body, cultivating a positive attitude, proactively attempting to understand one's role as a caregiver to improve caregiving capabilities, focusing on others as well as oneself, supporting the independence of the care receiver, and creating constructive relationships with other people surrounding them." The components of empowerment clarified in this research can be used for the measurement of and interventions aimed at improving empowerment among family caregivers. Furthermore, clarifying the definition of empowerment among family caregivers enables researchers to better distinguish empowerment from similar concepts in the future. © 2017 John Wiley & Sons Australia, Ltd.

SYSTEME MULTISENSEUR DE PERCEPTION 3D POUR LE ROBOT MOBILE HILARE

OpenAIRE

Ferrer , Michel

1982-01-01

L'ETUDE PRESENTEE S'INSERE DANS LE VASTE DOMAINE DE LA VISION ARTIFICIELLE. ELLE CONCERNE PLUS PARTICULIEREMENT L'INTEGRATION DU SYSTEME DE PERCEPTION TROIS DIMENSIONS (3D) DU ROBOT MOBILE AUTONOME HILARE. CE SYSTEME EST COMPOSE D'UNE CAMERA MATRICIELLE A SEMICONDUCTEURS, D'UN TELEMETRE LASER ET D'UNE STRUCTURE MECANIQUE ASSURANT LA DEFLEXION DU FAISCEAU LASER. DANS CE MEMOIRE SONT DECRITS: LA CONCEPTION DE LA STRUCTURE DEFLECTRICE; LE LOGICIEL DE TRAITEMENT DES IMAGES VIDEO MULTINIVEAUX BASE...

Conceptions of Parents, Conceptions of Self, and Conceptions of God.

Science.gov (United States)

Buri, John R.; Mueller, Rebecca A.

Different theorists have suggested that an individual's view of God may be related to one's view of one's father, one's mother, or one's self. A study was conducted to examine the relationship of college students' conceptions of the wrathfulness-kindliness of God to their conceptions of their father's and mother's permissiveness, authoritarianism,…

Ontology-driven approach for describing industrial socio-cyberphysical systems’ components

Directory of Open Access Journals (Sweden)

Teslya Nikolay

2018-01-01

Full Text Available Nowadays, the concept of the industrial Internet of things is considered by researchers as the basis of Industry 4.0. Its use is aimed at creating a single information space that allows to unite all the components of production, starting from the processed raw materials to the interaction with suppliers and users of completed goods. Such a union will allow to change the established business processes of production to increase the customization of end products for the consumer and to reduce the costs for its producers. Each of the components is described using a digital twin, showing their main characteristics, important for production. The heterogeneity of these characteristics for each of the production levels makes it very difficult to exchange information between them. To solve the problem of interaction between individual components this paper proposes to use the ontological approach to model the components of industrial socio-cyberphysical systems. The paper considers four scenarios of interaction in the industrial Internet of things, based on which the upper-level ontology is formed, which describes the main components of industrial socio-cyberphysical systems and the connections between them.

Industrial approach to piezoelectric damping of large fighter aircraft components

Science.gov (United States)

Simpson, John; Schweiger, Johannes

1998-06-01

Different concepts to damp structural vibrations of the vertical tail of fighter aircraft are reported. The various requirements for a vertical tail bias an integrated approach for the design. Several active vibrations suppression concepts had been investigated during the preparatory phase of a research program shared by Daimler-Benz Aerospace Military Aircraft (Dasa), Daimler-Benz Forschung (DBF) and Deutsche Forschungsandstalt fuer Luftund Raumfahrt (DLR). Now in the main phase of the programme, four concepts were finally chosen: two concepts with aerodynamic control surfaces and two concepts with piezoelectric components. One piezo concept approach will be described rigorously, the other concepts are briefly addressed. In the Dasa concept, thin surface piezo actuators are set out carefully to flatten the dynamic portion of the combined static and dynamic maximum bending moment loading case directly in the shell structure. The second piezo concept by DLR involves pre-loaded lead zirconate titanate (PZT)-block actuators at host structure fixtures. To this end a research apparatus was designed and built as a full scale simplified fin box with carbon fiber reinformed plastic skins and an aluminium stringer-rib substructure restrained by relevant aircraft fixtures. It constitutes a benchmark 3D-structural impedance. The engineering design incorporates 7kg of PZT surface actuators. The structural system then should be excited to more than 15mm tip displacement amplitude. This prepares the final step to total A/C integration. Typical analysis methods using cyclic thermal analogies adapted to induced load levels are compared. Commercial approaches leading onto basic state space model interpretation wrt. actuator sizing and positioning, structural integrity constraints, FE-validation and testing are described. Both piezoelectric strategies are aimed at straight open-loop performance related to concept weight penalty and input electric power. The required actuators, power

The Idea of «Concept» in the Studies of Culture

Directory of Open Access Journals (Sweden)

Tatarskaya Daria Tatarskaya

2014-01-01

Full Text Available The article is devoted to analyzing the difference between discourses about "concept". It is an attempt to reveal the features of these approaches to the problem of understanding and studying of "concept". This term is currently at its peak popularity in the human studies, which is connected with its universality and the process of globalization, which generates an interest to studying cultures though these keywords or concepts. Meanwhile, the discourse about "concept" firstly appeared in philosophical literature. Then at the early twentieth century an interest to "concept" arose in Russian linguistics. Afterwards, the term came from the field of pure linguistics to the fields of cognitive linguistics and cultural linguistics, and then in the first decade of XXI century it was rekindled thanks to philosophy. Nowadays in the modern humaninities there are the coexistence of different approaches to understanding, interpretation and investigation of concept. In terms of linguistics the concept constitutes the meaning of sign, and its investigation focused on the search of different means of representation of it in the language and on the basis on them structuring the concept. Linguocognitive science has its aim in building a cognitive model of representation this term in the linguistic consciousness of a native speaker. The feature of cultural linguistics approach is its orientation on the search of cultural component of concept. And the approach of cultural studies focused on the search of the features and the analysis of the essence of this phenomenon in the general context of culture

THE EFFECT OF CONCEPT MAPPING ON CONCEPT LEARNING IN SCIENCE

OpenAIRE

岡, 直樹; 今永, 久美子

2012-01-01

An experiment was conducted to investigate the effects of concept map completion tasks on concept learning in the primary schoolchildren. The participants were to insert some of the suitable concepts (concept group) or link labeles (link label group) or both of them (concept/link label group) into the blanks to make up the map wholly. It was revealed that the results of the concept group and the concept/link label group were better than the link label group. These results were discussed in te...

Use of a new ion-detector in the study of the jet plasma injected into a pulsed magnetic mirror configuration (deca I); Utilisation d'un nouveau detecteur d'ions dans l'etude du jet de plasma injecte dans deca I

Energy Technology Data Exchange (ETDEWEB)

Renaud, C [Association Euratom-CEA Cadarache, Groupe de Recherches sur la Fusion Controlee, 13 - Saint-Paul-lez-Durance (France). Centre d' Etudes Nucleaires

1963-07-01

The study of a high sensitivity ion detector coupled to an electrostatic analyser has permitted a large investigation of the plasma jet injected into a pulsed magnetic mirror configuration. In this detector the positive ions are accelerated through a potential of 30 kV; they strike a metallic target, on which they produce secondary electrons; these, in turn, are accelerated onto a plastic scintillator. The light pulses are detected with a photomultiplier. The gain of this device is about 10{sup 7}. If we make an admission of air into the vacuum system and again we make vacuum, the gain is not modified, since no special activated surfaces are situated in the detector. (author) [French] L'etude d'un detecteur d'ions de grande sensibilite, allie a un analyseur electrostatique a permis une investigation approfondie du jet de plasma injecte dans le dispositif d'Etude de Compression Adiabatique. Dans ce detecteur, les ions positifs sont acceleres par une difference de potentiel voisine de 30 kV, ils bombardent une cible metallique et creent des electrons secondaires qui sont a leur tour acceleres vers un scintillateur plastique. Les impulsions lumineuses sont alors detectees par un photomultiplicateur. Le gain obtenu pour l'ensemble du detecteur est voisin de 10{sup 7}. Le detecteur ne possedant pas de surfaces specialement activees, les remises a l'air n'entrainent pas de variation de gain. (auteur)

Project of mechanical components for nuclear power plants

International Nuclear Information System (INIS)

Amaral, J.A.R. do; Farias Brito David, D. de

1984-01-01

The equipment foreseen to be part of a nuclear power plant must show high quality and safety due to the presence of radioactivity. Besides the perfect functioning during the rigid operating conditions, some postulated loadings are foreseen, like earthquake and loss of coolant accidents, which must be also considered in the design of the components. The design and calculation's concept and development, the interactions with the piping and civil designs, as well as their influences in the licensing process with the authorities are described. (Author) [pt

Studies on components for a molten salt reactor

International Nuclear Information System (INIS)

Nejedly, M.; Matal, O.

2003-01-01

The aim is contribute to a design of selected components of molten salt reactors with fuel in the molten fluoride salt matrix. Molten salt reactors (MSRs) permit the utilization of plutonium and minor actinides as new nuclear fuel from a traditional nuclear power station with production of electric energy. Results of preliminary feasibility studies of an intermediate heat exchanger, a small power molten salt pump and a modular conception of a steam generator for a demonstration unit of the MSR (30 MW) are summarized. (author)

A Concept Analysis of Systems Thinking.

Science.gov (United States)

Stalter, Ann M; Phillips, Janet M; Ruggiero, Jeanne S; Scardaville, Debra L; Merriam, Deborah; Dolansky, Mary A; Goldschmidt, Karen A; Wiggs, Carol M; Winegardner, Sherri

2017-10-01

This concept analysis, written by the National Quality and Safety Education for Nurses (QSEN) RN-BSN Task Force, defines systems thinking in relation to healthcare delivery. A review of the literature was conducted using five databases with the keywords "systems thinking" as well as "nursing education," "nursing curriculum," "online," "capstone," "practicum," "RN-BSN/RN to BSN," "healthcare organizations," "hospitals," and "clinical agencies." Only articles that focused on systems thinking in health care were used. The authors identified defining attributes, antecedents, consequences, and empirical referents of systems thinking. Systems thinking was defined as a process applied to individuals, teams, and organizations to impact cause and effect where solutions to complex problems are accomplished through collaborative effort according to personal ability with respect to improving components and the greater whole. Four primary attributes characterized systems thinking: dynamic system, holistic perspective, pattern identification, and transformation. Using the platform provided in this concept analysis, interprofessional practice has the ability to embrace planned efforts to improve critically needed quality and safety initiatives across patients' lifespans and all healthcare settings. © 2016 Wiley Periodicals, Inc.

Concept analysis and the building blocks of theory: misconceptions regarding theory development.

Science.gov (United States)

Bergdahl, Elisabeth; Berterö, Carina M

2016-10-01

The purpose of this article is to discuss the attempts to justify concepts analysis as a way to construct theory - a notion often advocated in nursing. The notion that concepts are the building blocks or threads from which theory is constructed is often repeated. It can be found in many articles and well-known textbooks. However, this notion is seldom explained or defended. The notion of concepts as building blocks has also been questioned by several authors. However, most of these authors seem to agree to some degree that concepts are essential components from which theory is built. Discussion paper. Literature was reviewed to synthesize and debate current knowledge. Our point is that theory is not built by concepts analysis or clarification and we will show that this notion has its basis in some serious misunderstandings. We argue that concept analysis is not a part of sound scientific method and should be abandoned. The current methods of concept analysis in nursing have no foundation in philosophy of science or in language philosophy. The type of concept analysis performed in nursing is not a way to 'construct' theory. Rather, theories are formed by creative endeavour to propose a solution to a scientific and/or practical problem. The bottom line is that the current style and form of concept analysis in nursing should be abandoned in favour of methods in line with modern theory of science. © 2016 John Wiley & Sons Ltd.

Adaptive change in self-concept and well-being during conjugal loss in later life.

Science.gov (United States)

Montpetit, Mignon A; Bergeman, C S; Bisconti, Toni L; Rausch, Joseph R

2006-01-01

The present study examines the association between the self-concept and adaptation to conjugal loss; the primary aim was to explore whether those individuals high in self-esteem, environmental mastery, and optimism have more adaptive resources with which to ameliorate the detrimental sequelae of bereavement. Analyses were conducted on data collected from 58 widows every four months over a two-year period. One goal of the research was to explore the adequacy of the theoretically chosen operational definition of the self-concept; another goal was to analyze how changes in the level of self-concept components correlated with changes in levels of depression, health, and grief resolution as individuals adjusted to their losses. Analyses revealed that trajectories of depression and grief resolution were more highly related than health to changes in self-concept.

Study of the structure of light neutron rich nucleus with the Tonnerre array; Etude de la structure de noyaux legers riches en neutrons a l'aide du multidetecteur Tonnerre

Energy Technology Data Exchange (ETDEWEB)

Pietri, St

2003-06-01

This work concern the technical development made on the multidetector TONNERRE and the study of the {sup 34}Si nucleus by a complete beta-neutron-gamma spectroscopy. In the first part various tests performed on modules of the detector in the 'Centre d'Etude de Bruyere le Chatel' are presented. A modification of the embassies of the photomultipliers tubes allows to gain more than 50% in the neutron efficiency and to obtain a threshold lower than 300 keV for the neutron energy. A complete C++ simulation of the neutron propagation in the array was carried out. It explains that the slow component of the light output of the scintillator may be responsible of the shape of the time-of-flight spectrum. The second part of these report presents the experiment devoted to the study of the structure of the {sup 34}Si from the beta decay of the {sup 34}Al. It was performed at the GANIL facility using the TONNERRE array and germanium of ENOGAM. The {sup 34}Al was produced by projectile fragmentation of a {sup 36}S beam of 50 MeV/A in a target of {sup 9}Be. A complete beta scheme of the {sup 34}Al is proposed. Eight neutron lines following the {sup 34}Al decay were observed for the first time. Finally we suggest that a monopolar transition could occur in the {sup 34}Si nucleus signing a O{sup +}{sub 2} state at 2133 keV. (author)

Imprecise system reliability and component importance based on survival signature

International Nuclear Information System (INIS)

Feng, Geng; Patelli, Edoardo; Beer, Michael; Coolen, Frank P.A.

2016-01-01

The concept of the survival signature has recently attracted increasing attention for performing reliability analysis on systems with multiple types of components. It opens a new pathway for a structured approach with high computational efficiency based on a complete probabilistic description of the system. In practical applications, however, some of the parameters of the system might not be defined completely due to limited data, which implies the need to take imprecisions of component specifications into account. This paper presents a methodology to include explicitly the imprecision, which leads to upper and lower bounds of the survival function of the system. In addition, the approach introduces novel and efficient component importance measures. By implementing relative importance index of each component without or with imprecision, the most critical component in the system can be identified depending on the service time of the system. Simulation method based on survival signature is introduced to deal with imprecision within components, which is precise and efficient. Numerical example is presented to show the applicability of the approach for systems. - Highlights: • Survival signature is a novel way for system reliability and component importance • High computational efficiency based on a complete description of system. • Include explicitly the imprecision, which leads to bounds of the survival function. • A novel relative importance index is proposed as importance measure. • Allows to identify critical components depending on the service time of the system.

VTVL concept optimisation of the landing gear

Directory of Open Access Journals (Sweden)

Camelia Elena MUNTEANU

2017-03-01

Full Text Available Vertical takeoff, vertical landing (VTVL is a subject of international interest at the moment thanks to the successful recovery of the Blue Origin vehicle. Aggressive weight targets with a short development time in the aerospace and space industry clearly need an integration of advanced computer aided structural optimization methods. Topological optimization is used from the concept phase of a design process development in order to obtain a fundamental design approach. The aim of the article is to determine the principal directions for distribution of the material for a VTVL landing gear within the specified volume in order to obtain the initial design approach. To achieve the maximum performance within the studied component, the result is then refined from a manufacturability point of view. The use of such methods notably reduces the development iterations between the design and stress departments. Thus, the overall time is reduced which translates into a lower overall cost and shorter time development from the concept to the final product.

Design feasibility study of a divertor component reinforced with fibrous metal matrix composite laminate

International Nuclear Information System (INIS)

You, J.-H.

2005-01-01

Fibrous metal matrix composites possess advanced mechanical properties compared to conventional alloys. It is expected that the application of these composites to a divertor component will enhance the structural reliability. A possible design concept would be a system consisting of tungsten armour, copper composite interlayer and copper heat sink where the composite interlayer is locally inserted into the highly stressed domain near the bond interface. For assessment of the design feasibility of the composite divertor concept, a non-linear multi-scale finite element analysis was performed. To this end, a micro-mechanics algorithm was implemented into a finite element code. A reactor-relevant heat flux load was assumed. Focus was placed on the evolution of stress state, plastic deformation and ductile damage on both macro- and microscopic scales. The structural response of the component and the micro-scale stress evolution of the composite laminate were investigated

Design feasibility study of a divertor component reinforced with fibrous metal matrix composite laminate

Energy Technology Data Exchange (ETDEWEB)

You, J.-H. [Max-Planck-Institut fuer Plasmaphysik, EURATOM Association, Boltzmannstr. 2, D-85748 Garching (Germany)]. E-mail: j.h.you@ipp.mpg.de

2005-01-01

Fibrous metal matrix composites possess advanced mechanical properties compared to conventional alloys. It is expected that the application of these composites to a divertor component will enhance the structural reliability. A possible design concept would be a system consisting of tungsten armour, copper composite interlayer and copper heat sink where the composite interlayer is locally inserted into the highly stressed domain near the bond interface. For assessment of the design feasibility of the composite divertor concept, a non-linear multi-scale finite element analysis was performed. To this end, a micro-mechanics algorithm was implemented into a finite element code. A reactor-relevant heat flux load was assumed. Focus was placed on the evolution of stress state, plastic deformation and ductile damage on both macro- and microscopic scales. The structural response of the component and the micro-scale stress evolution of the composite laminate were investigated.

Design principles and overall aspects to proof the integrity of pressurized components

International Nuclear Information System (INIS)

Roos, E.; Herter, K.-H.; Schuler, X.

2005-01-01

Technical codes and standards used for the construction, design and operation of nuclear components and systems provides the material data required, detailed stress analysis procedures and a design philosophy which guarantees a reliable behaviour of the systems, structures and components (SSC) throughout the specified life time. It is important that the design concept accounts for most possible damage mechanisms and failure modes and provides rational margins of safety against each type of damage mechanism and failure mode. The design criteria according to codes and standards are the basic rules upon which the mechanical behaviour of the SSC is based. For cyclic stress evaluation the different codes and standards provides fatigue analyses to be performed considering the various loading histories (mechanical and thermal loads) and geometric complexities of the SSC. Essentially the philosophy for the mechanical design in all of the codes and standards broadly encompasses the two approaches of Design-by-Rule (DBR) and Design-by-Analysis (DBA). Design-by-Experiment (DBE) and Design-by-Fracture Mechanics (DBFA) are in special cases additional possibilities for the design as well as for the proof of integrity of SSC. Based on the German Basis Safety Concept a general concept to ensure the integrity of pressurised components is developed. As a premise for a systematically approach it is indispensable to show that the as-built status of quality (actual material characteristics, actual as-built configurations, design, actual loading) is according to the requirements given in the guidelines and standards, to show that sufficient knowledge of possible failure mechanism (e.g. no inadmissible dynamic loading, no corrosion) is available and to show that the as-built status of quality can be guaranteed for the succeeding operation. The calculation methods and fracture mechanics approaches are verified by numerous experimental data. (authors)

Theoretical Prerequisites for the Formation of the Concept of Environmentally Responsible Marketing

Directory of Open Access Journals (Sweden)

Kniazieva Tetiana V.

2017-12-01

Full Text Available The aim of the article is to study the evolution of theoretical approaches to the problems related to the ecological and economic interaction of economic entities and clarify the essential characteristics of the economic component of environmentally responsible marketing. By analyzing, systematizing and summarizing scientific works of domestic and foreign scientists, the evolution of marketing concepts is considered, the views of researchers on the definition of the concepts “social marketing”, “environmental marketing” are systematized. As a result of the research, the advantages and disadvantages of the existing definitions of “green” marketing are highlighted. The main characteristics of the concept “environmentally responsible marketing” are formulated in the context of the concepts of sustainable development and socially responsible marketing. Prospects for further research in this area are: the infrastructure of environmentally responsible marketing; a conceptual justification of the methodology for building an environmentally responsible marketing system; factors and models of modern economic growth with consideration for the environmental factor, etc.

Development and verification test of integral reactor major components

Energy Technology Data Exchange (ETDEWEB)

Kim, J. I.; Kim, Y. W.; Kim, J. H. and others

1999-03-01

The conceptual designs for SG, MCP, CEDM to be installed in the integral reactor SMART were developed. Three-dimensional CAD models for the major components were developed to visualize the design concepts. Once-through helical steam generator was conceptually designed for SMART. Canned motor pump was adopted in the conceptual design of MCP. Linear pulse motor type and ballscrew type CEDM, which have fine control capabilities were studied for adoption in SMART. In parallel with the structural design, the electro-magnetic design was performed for the sizing motors and electro-magnet. Prototypes for the CEDM and MCP sub-assemblies were developed and tested to verify the performance. The impeller design procedure and the computer program to analyze the dynamic characteristics of MCP rotor shaft were developed. The design concepts of SG, MCP, CEDM were also invetigated for the fabricability.

Development and verification test of integral reactor major components

International Nuclear Information System (INIS)

Kim, J. I.; Kim, Y. W.; Kim, J. H. and others

1999-03-01

The conceptual designs for SG, MCP, CEDM to be installed in the integral reactor SMART were developed. Three-dimensional CAD models for the major components were developed to visualize the design concepts. Once-through helical steam generator was conceptually designed for SMART. Canned motor pump was adopted in the conceptual design of MCP. Linear pulse motor type and ballscrew type CEDM, which have fine control capabilities were studied for adoption in SMART. In parallel with the structural design, the electro-magnetic design was performed for the sizing motors and electro-magnet. Prototypes for the CEDM and MCP sub-assemblies were developed and tested to verify the performance. The impeller design procedure and the computer program to analyze the dynamic characteristics of MCP rotor shaft were developed. The design concepts of SG, MCP, CEDM were also invetigated for the fabricability

Short-range components of nuclear forces: Experiment versus mythology

International Nuclear Information System (INIS)

Kukulin, V. I.; Platonova, M. N.

2013-01-01

The present-day situation around the description of various (central, spin-orbit, and tensor) components of short-range nuclear forces is discussed. A traditional picture of these interactions based on the idea of one-meson exchange is contrasted against numerous results of recent experiments. As is shown in the present study, these results often deviate strongly from the predictions of traditional models. One can therefore state that such models are inapplicable to describing short-range nuclear forces and that it is necessary to go over from a traditional description to some alternative QCD-based (or QCD-motivated) picture. This means that, despite the widespread popularity of traditional concepts of short-range nuclear forces and their applicability in many particular cases, these concepts are not more than scientific myths that show their inconsistency when analyzed from the viewpoint of the modern experiment

Thermo-characterization of power systems components: a tool to diagnose their malfunctions

International Nuclear Information System (INIS)

Zaleta-Aguilar, Alejandro; Royo, Javier; Rangel, Victor H.; Torres-Reyes, Ernestina

2004-01-01

Concepts on thermodynamic characterization of power system components are presented in this paper. The aim of this work is to evaluate and diagnose the actual operating condition for existing power plant components. What is more, a Reference Performance State (RPS) for power system components which uses the parameters defined as the enthalpy change, ω, the entropy change, σ and the Mass Flow Ratio design, MFR is put forward. Design information and simulation will help to determine the RPS for each component operating without any malfunction. The RPS can be used to compare, to evaluate and to diagnose the actual operating condition of the plant components so as to detect its possible malfunction. A simulated example of a 105 MW power plant is presented herein so that thermo-characterization of steam turbines, a condenser, a heat exchanger, and a pump is illustrated. The induced and intrinsic component malfunction effects on the RPS are also presented. Their effects are related to the RPS, thereby opening the possibility to apply methodologies to any internal decay and/or induced malfunctions that could appear in an operating component, in terms of the heat rate impact

User interaction concept for plasma discharge control on WENDELSTEIN 7-X

International Nuclear Information System (INIS)

Spring, Anett; Laqua, Heike; Niedermeyer, Helmut

2006-01-01

The requirements to the user interfaces arising from the concept of segmented discharges allowing short pulses and steady state operation and from the distributed hierarchical structure of the experiment are discussed. The modular design of the user interfaces is presented including specialised tools for preparation, manipulating, and monitoring the discharge operation. The user guidance and the mapping of complex control procedures onto a physically relevant view on the plasma discharge process will be vitally important. The feasibility of the user interaction concept could already be validated on a prototype installation and during commissioning of the first technical WENDELSTEIN 7-X (W7-X) components

Core mechanics and configuration behavior of advanced LMFBR core restraint concepts

International Nuclear Information System (INIS)

Fox, J.N.; Wei, B.C.

1978-02-01

Core restraint systems in LMFBRs maintain control of core mechanics and configuration behavior. Core restraint design is complex due to the close spacing between adjacent components, flux and temperature gradients, and irradiation-induced material property effects. Since the core assemblies interact with each other and transmit loads directly to the core restraint structural members, the core assemblies themselves are an integral part of the core restraint system. This paper presents an assessment of several advanced core restraint system and core assembly concepts relative to the expected performance of currently accepted designs. A recommended order for the development of the advanced concepts is also presented

Contribution to the study of uranyl salts in butyl phosphate solutions; Contribution a l'etude des solutions de sels d'uranyle dans les phosphates butyliques

Energy Technology Data Exchange (ETDEWEB)

Coulon, A. [Commissariat a l' Energie Atomique, Fontenay-aux-Roses (France). Centre d' Etudes Nucleaires

1965-06-01

A spectroscopic study in the normal infrared region and involving the following associations: tri-alkyl phosphates (tri-butyl, tri-ethyl, tri-methyl), uranyl salts (nitrate, chloride, acetate) has confirmed the existence of an interaction between the phosphoryl group and the uranium atom, as shown by a movement of absorption band for the valency P = 0 from {approx} 1270 cm{sup -1} to {approx} 1180 cm{sup -1}. A study of the preparation, analysis and spectroscopy of the solids obtained by the precipitation of uranyl salts by acid butyl phosphates has been carried out. By infrared spectrophotometry it has been shown that the tri-butyl and di-butyl phosphates are associated in non-polar diluents even before the uranium is introduced. The extraction of uranyl salts from acid aqueous solutions by a diluted mixture of tri-butyl and di-butyl phosphates proceeds by different mechanisms according to the nature of the ion (nitrate or chloride). (author) [French] Une etude spectroscopique dans l'infrarouge moyen portant sur les associations: - phosphates trialcoyliques (tributylique - triethylique - trimethylique) - sels d'uranyle (nitrate, chlorure, acetate) a confirme l'existence d'une interaction entre le groupement phosphoryle et l'atome d'uranium, se manifestant par un deplacement de la bande d'absorption de la vibration de valence P = 0 de {approx} 1270 cm{sup -1} a {approx} 1180 cm{sup -1}. Une etude preparative, analytique et spectroscopique des solides obtenus par precipitation de sels d'uranyle par les phosphates butyliques acides a ete effectuee. La spectrophotomerie infrarouge met en evidence l'association, anterieure a toute introduction d'uranium, des phosphates tributylique et dibutylique dans des diluants non polaires. L'extraction de sels d'uranyle, d'une solution aqueuse acide par un melange dilue de phosphates tributylique et dibutylique, s'effectue suivant des processus differents a la

Physical study of the 'snow flake' version of the reactor EL-3 (1963); Etude physique de la version ''cristal de neige'' de la pile EL-3 (1963)

Energy Technology Data Exchange (ETDEWEB)

Abillon, E; Genthon, J P [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

1963-07-01

A systematic study has been made of the different thermodynamic and neutronic aspects of various versions of the 'snow flake' likely to fulfil the aims which were set out (improvement of the reactivity, of the experimental volume, improvement in the working conditions of EL-3). After this systematic study, a choice was made in principle of one version amongst the several available (solutions using 8 or 10 pencils-various methods of heat transfer: corrugation, cartridges which may or may not be filled with helium... etc., variable enrichments... ). The choice is that of a version which can already at the present be considered as feasible, which represents already a notable improvement of the pile and which does not imply the existence of a major problem as far as the possible change-over later to an improved version is concerned. This choice defines a fuel element and a configuration for the core. A detailed recapitulation has been made of all the research being carried out for the possible solutions in this particular case. (authors) [French] On a etudie systematiquement les differents aspects thermodynamiques et neutroniques de diverses versions 'cristal de neige' susceptibles de remplir les buts fixes (amelioration en reactivite, en volume experimental, amelioration des problemes d'exploitation de EL-3). Apres cette etude systematique, on a procede au choix de principe d'une version parmi les differentes solutions possibles (solutions a 8 ou 10 crayons - possibilite de transfert de chaleur divers: corrugations, cartouches remplies He ou non.... etc., enrichissements variables... ). Ce choix est celui d'une version qu'on peut juger viable des aujourd'hui, qui represente deja une amelioration importante de la pile et qui n'implique pas de probleme majeur quant au passage ulterieur et eventuel a une version plus amelioree. Ce choix definit un element combustible, et une configuration de coeur. On a recapitule et detaille sur ce cas particulier de pile les etudes

Evaluation of the Introduction of an e-Health Skills Component for Dietetics Students.

Science.gov (United States)

Rollo, Megan E; Collins, Clare E; MacDonald-Wicks, Lesley

2017-11-01

Appropriate and effective use of technology within practice is a key competency outlined in Australian dietetics training standards. An e-health skills component (lecture and workshop) was introduced to undergraduate students enrolled in an Australian nutrition and dietetics program. The lecture orientated students to key e-health terms and concepts relating to telehealth and m-health technologies, while the workshop provided an opportunity to apply knowledge. The workshop consisted of four stations with activities relating to (1) orientation to telehealth equipment; (2) comparison of dietetic consultation components completed in person versus remotely via video call; (3) quality assessment of mobile apps; and (4) exploration of advantages and disadvantages, and the ethical, security, and privacy issues relating to use of e-health technologies in dietetic practice. Student experience of the training was evaluated via questionnaire. Forty-five students (62.2% aged ≤19-24 years, 86.7% female) completed the survey. Following the workshop, the level of understanding relating to each key e-health concept improved significantly (p education to support the use of e-health technologies within dietetic practice were rated a high level of importance by most students (78-80%). The majority of students (93.3% to 97.8%) reported a positive experience at each of the four workshop stations, with "informative" the most common word selected to rate each station (37.8% to 44.4% of students across the four stations). The introduction of an e-health skills component resulted in an improved understanding of concepts for using these technologies. These findings provide preliminary support for integration of further e-health training within the dietetics program.

Applications of prospecting geochemical techniques to the search for and to the study of uranium deposits in metropolitan France; Applications des techniques geochimiques de prospection a la recherche et a l'etude des gites uraniferes en France metropolitaine

Energy Technology Data Exchange (ETDEWEB)

Grimbert, Arnold

1957-07-01

After having recalled facts which leaded the CEA to use new geochemical techniques for the prospecting of uranium deposits through sampling and analysis of soils and waters, the author describes the organisation and methods implemented for this prospecting activity: team composition for sampling and analysis, role of each engineer and technician in the prospecting stages (preliminary study, routine prospecting, result interpretation), sampling and analysis processes. He also reports campaigns of geochemical prospecting: study of the La Chapelle Largeau deposit (objectives, geological context, preliminary study, routine prospecting, study of geochemical anomalies), tactical research on Verneix indices (study of radioactivity anomaly discovered by radio-prospecting), strategical searches in a non prospected area in the South of Avallon. The author discusses the issues of efficiency and cost price of this geochemical prospecting technique in soils and in waters. Appendices present the equipment and operation modality for soil sampling, and for soil sample preparation, and principles, equipment and products for soil analysis and for water analysis [French] A la suite des resultats satisfaisants obtenus dans la recherche de methodes de dosage adaptees au cas de l'uranium, la Direction des Recherches Minieres du Commissariat a l'Energie atomique a decide, en decembre 1954, d'utiliser, conjointement avec les methodes classiques de prospection, les techniques geochimiques pour la recherche et l'etude des gites uraniferes. Ces applications pratiques ont ete confiees a une Section de Geochimie dont l'organisation, les moyens en personnel et en materiel, ainsi que les methodes de travail, font l'objet d'un expose detaille. Quelques exemples de prospection, en France metropolitaine, montrent la nature des problemes poses (etude d'un gisement connu, recherche tactique sur des indices, recherche strategique dans une region non prospectee), les methodes utilisees pour les

INDUCON building concept; INDUCON-rakennuskonsepti

Energy Technology Data Exchange (ETDEWEB)

Sarja, A.; Laine, J.; Pulakka, S.; Saari, M. [VTT Building and Transport, Espoo (Finland)

2003-08-01

The new and stronger requirements: lifetime economy, functionality in use and in changes of use, technical lifetime performance, energy efficiency, healthy, safety, ecology and local culture, are serving a challenge for the building technology. Additionally the pressure towards decreasing the construction costs with the increase of productivity of the work and capital is increased. The objective of this research work has been to respond the challenges described above with creating alternative building concepts, which could allow production of individually designed apartment and office buildings, including methodology and methods to optimise the building concepts and individual buildings in relation to the lifetime quality. Building concept is a repeatable and documented way of design and construction, which can result in individual buildings with an optimised and high lifetime quality. Lifetime quality is the capability of a building to fulfil the requirements of the users, owners and society during entire design period of the building. The INDUCON building concept is focused on the following issues: Classified and optimised lifetime quality (incl. the viewpoints of functionality, performance, economy, ecology and culture), and the realisation of industrial production on an advanced level (incl. new models of building design and construction, simplification of building systems and products, decrease of the number of parts of buildings, improvement of finishing of the prefabricated components and modules, and improving the interaction and compatibility of structures and building service systems). As a result are presented: systematised and classified definitions of performance properties of buildings; corresponding specifications of building systems, modules and components; design principles, process descriptions; examples (incl. Routings of technical building services, specification and classification of the health and comfort properties of indoor air, calculations

Apparatus for studying the diffusion of rare gases in stainless steel; Appareil pour etude de la diffusion des gaz rares dans l'acier inoxydable

Energy Technology Data Exchange (ETDEWEB)

Stohr, J A; Alfille, L [Commissariat a l' Energie Atomique, Saclay (France).Centre d' Etudes Nucleaires

1959-07-01

This apparatus enables measurements to be carried out on the diffusion of gaseous fission products and of gases in general across thin metallic walls at high temperatures. This work was initially intended to solve the problems involved in systems for detecting the rupture of a fuel element can (D.R.G.) by the diffusion of fission products through the cans at high temperatures. The extension of the work to other fields is envisaged. (author) [French] Cet appareil permet d'effectuer des mesures sur la diffusion des produits de fission gazeux, et des gaz en general, au travers de parois metalliques minces a haute temperature. Au depart, ce procede devait contribuer a resoudre les problemes poses aux systemes detecteurs de rupture de gaine (D.R.G.), par la diffusion des produits de fission au travers des gaines de cartouches a haute temperature. Son extension a d'autres etudes est envisagee. (auteur)

Prestressed-concrete pressure vessels and their applicability to advanced-energy-system concepts

International Nuclear Information System (INIS)

Naus, D.J.

1983-01-01

Prestressed concrete pressure vessels (PCPVs) are, in essence, spaced steel structures since their strength is derived from a multitude of steel elements made up of deformed reinforcing bars and prestressing tendons which are present in sufficient quantities to carry tension loads imposed on the vessel. Other major components of a PCPV include the concrete, liner and cooling system, and insulation. PCPVs exhibit a number of advantages which make them ideally suited for application to advanced energy concepts: fabricability in virtually any size and shape using available technology, improved safety, reduced capital costs, and a history of proven performance. PCPVs have many applications to both nuclear- and non-nuclear-based energy systems concepts. Several of these concepts will be discussed as well as the research and development activities conducted at ORNL in support of PCPV development

Measurement of components of load parallel to cracks in a proof of safety against fracture

International Nuclear Information System (INIS)

Amstutz, H.; Seeger, T.

1992-01-01

Largely standardized processes are now available in the R6 concept, the engineering approach and the engineering treatment model (ETM) according to Schwalbe, which make judgment and quantitative assessment of the fracture and failure behaviour of components with cracks and faults similar to cracks possible. When using the process on components with a multi-axial basic stress state, the question arises for pure mode I stresses, to what extent and in what form the effect of the load parallel to the cracks can be included in the concepts. Based on a numerical study with finite elements, the connections between global bi-axial load and local stress conditions are shown in the article, using the example of the J integral, and are discussed regarding taken them into account in the proof of safety against fracture. (orig.) [de

The Bobath concept in stroke rehabilitation: a focus group study of the experienced physiotherapists' perspective.

Science.gov (United States)

Lennon, S; Ashburn, A

2000-10-15

The Bobath concept, usually known as neuro-developmental treatment (NDT) in America, is one of the major approaches used to rehabilitate patients following stroke; however since the last publication of Bobath (1990), the concept has been taught via an oral tradition on postgraduate courses. This study therefore aimed to explore with experienced therapists firstly how the Bobath concept had changed since 1990, and secondly what they considered its main theoretical assumptions to be using a focus group research design. Eight peer-nominated expert physiotherapists agreed to participate in two focus groups organized according to specialist interest in either neurology (group A) or elderly care (group B). Therapists were asked to discuss six topics based on a review of published literature. Data analysis involved several readings of verbatim transcriptions, from which key themes and concepts were developed. All therapists agreed on the following core themes defining Bobath: analysis of normal movement, control of tone and facilitation of movement. Neuroplasticity was described as the primary rationale for treatment with therapists using afferent information to target the damaged central nervous system. In addition group A discussed motor learning, whereas group B discussed patient focused goals and relating treatment to function. This study highlighted changes in theory, terminology, and techniques. Tone remained a major problem in the rehabilitation management of the hemiplegic patient; however much attention was also directed towards the musculoskeletal system. Both facilitation of normal movement components and task specific practice using specific manual guidance were considered critical elements of the Bobath concept. For Bobath therapists, physiotherapy has an important impact on both the performance components of movement and functional outcomes. In view of the small numbers involved in this preliminary study, further studies are now needed to determine if these

Underground nuclear explosions. Geological survey of the cavities; Explosions nucleaires souterraines etude geologique des cavites

Energy Technology Data Exchange (ETDEWEB)

Faure, J [Commissariat a l' Energie Atomique, Bruyeres-le-Chatel (France). Centre d' Etudes

1969-07-01

A geological survey of underground nuclear explosions makes it possible to determine the main characteristics of the cavity formed. The lower portion is spherical; the same was very likely true of the roof, which collapses in the majority of media with the exception of rock-salt. Its radius, for a given bomb size, can vary by a factor of two according to the type of rock. The lay-out of its contents depends on the characteristics of the solid and liquid products at the moment of the roof collapse; according to the medium involved, mixing of the rubble and the mud-flow occurs (granite) or does not occur (tuff and alluvia). In all media, the average physical properties can be evaluated. (author) [French] L'etude geologique d'explosions nucleaires souterraines permet de determiner les principaux caracteres de la cavite creee. Sa partie inferieure est spherique; il en etait vraisemblablement de meme de sa voute, effondree dans la plupart des milieux a l'exception du sel gemme. Son rayon, a energie d'engin egale, varie selon les roches du simple au double. La disposition de son contenu depend des caracteristiques des produits solides et liquides au moment de la chute du toit; selon le cas, il n'y a pas (tuf et alluvions) ou il y a (granite) melange des eboulis et des laves. Dans tous les milieux, les proprietes physiques moyennes peuvent etre evaluees. (auteur)

The dynamic behaviour of heat exchangers; Etude du comportement dynamique des echangeurs de chaleur

Energy Technology Data Exchange (ETDEWEB)

Fonteray, J; Rozenholc, M [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

1963-07-01

In order to study the dynamics of nuclear power plants, one needs mathematical models made up of ordinary differential equations. This report deals with models for heat exchangers. These models allow exact evaluations of the temperatures for any steady state. The deformation of the temperature maps during transients is taken into account. To do this, average temperatures are evaluated keeping In mind, on one hand the partial differential equations, on the other hand, the physical phenomenons which are involved. Seven ordinary differential equations at most, are necessary for one heat exchanger. Theses models were compared with mathematically exact ones and also with experimental results, that EDF was able to measure on EDF-1 heat exchangers. The results appear to be correct. (authors) [French] Les etudes de dynamique sur les centrales nucleaires exigent l'elaboration de modeles apparaissant sous forme d'equations differentlelles ordinaires. Ce rapport est consacre a la recherche de modeles d'echangeurs. Dans ces modeles les temperatures sont calculees exactement pour n'importe quel regime permanent. Pour tenir compte de la deformation des distributions de temperature en regime transitoire, on evalue les temperatures moyennes dans l'echangeur en s'appuyant, d'une part, sur les equations aux derivees partielles et, d'autre part, sur une analyse des phenomenes physiques. Les modeles contiennent au plus sept equations differentielles ordinaires. Ces modeles ont ete compares aux modeles mathematiques exacts et aussi a des resultats experimentaux, obtenus par l'EDF, sur les echangeurs d'EDF-1. Les resultats paraissent satisfaisants. (auteurs)

Reasoning about complex probabilistic concepts in childhood.

Science.gov (United States)

Fisk, John E; Bury, Angela S; Holden, Rachel

2006-12-01

The competencies of children, particularly their understanding of the more complex probabilistic concepts, have not been thoroughly investigated. In the present study participants were required to choose the more likely of two events, a single event, and a joint event (conjunctive or disjunctive). It was predicted that the operation of the representativeness heuristic would result in erroneous judgements when children compared an unlikely component event with a likely-unlikely conjunction (the conjunction fallacy) and when a likely component event was compared to a likely-unlikely disjunction. The results supported the first prediction with both older children aged between 9 and 10 years and younger children aged between 4 and 5 committing the conjunction fallacy. However, the second prediction was not confirmed. It is proposed that the basis of representativeness judgements may differ between the conjunctive and disjunctive cases with absolute frequency information possibly playing a differential role.

SunRISE Mission Concept Step 2 Study Status

Science.gov (United States)

Alibay, F.; Kasper, J. C.; Lazio, J.; Neilsen, T. L.

2017-12-01

We present an update on the Sun Radio Interferometer Space Experiment (SunRISE) mission concept, which was selected for a Step 2 study as part of the Small Explorer (SMEX) Mission of Opportunity (MoO) call. SunRISE is space-based sparse array, composed of six 6U CubeSats, designed to localize the radio emission associated with coronal mass ejections (CMEs) from the Sun. Radio emission from CMEs is a direct tracer of the particle acceleration in the inner heliosphere and potential magnetic connections from the lower solar corona to the larger heliosphere. Furthermore, CME radio emission is quite strong such that only a relatively small number of antennas is required, and a small mission would make a fundamental advancement. Indeed, the state-of-the-art for tracking CME radio emission is defined by single antennas (Wind/WAVES, Stereo/SWAVES) in which the tracking is accomplished by assuming a frequency-to-density mapping. This type of Heliophysics mission would be inherently cost prohibitive in a traditional spacecraft paradigm. However, the use of CubeSats, accompanied by the miniaturization of subsystem components, enables the development of this concept at lower cost than ever before. We present the most recent updates on this mission concept, starting from the concept's performance as compared to the required science and driving technical requirements. We then focus on the SunRISE mission concept of operations, which consists of six 6U CubeSats placed in a GEO graveyard orbit for 6 months to achieve the aforementioned science goals. The spacecraft fly in a passive formation, which allows them to form an interferometer while minimizing the impact on operations complexity. We also present details of the engineering design and the key trades being performed as part of the Step 2 concept study.

Some ways for the investigation of the solar modulation of cosmic electrons; Moyens d'etude de la modulation solaire des electrons cosmiques

Energy Technology Data Exchange (ETDEWEB)

Mercier, J [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

1969-07-01

In this report, we are investigating the solar modulation of cosmic electrons, in different ways. By comparing the calculated intensity with the measured intensity of positrons, we can evaluate the solar modulation of positrons, hence the modulation of negatons, since the modulation of negatons is probably the same that for positrons. By comparing the electron spectrum in interstellar space needed to explain the galactic background radio emission with that observed near the earth, we can deduce information about the modulation of electrons. We can investigate the modulation through the observation of its variations during the solar cycle. This different ways lead us to compatible results. In spite of the fact that the precision of the experimental data is poor, the modulation can be represented by: a constant or a form in exp(- K/Ro{beta}) under the rigidity Ro {approx_equal} 0,5 BV; a form in exp(- K/R) or exp(- K/R{beta}) above this rigidity. In addition, the investigation of both electrons and protons displays that the diffusion-convection theory is inadequate to explain all the features of the solar modulation. (author) [French] Dans le present rapport, nous etudions la modulation solaire des electrons cosmiques a l'aide de plusieurs methodes. Par comparaison entre l'intensite calculee et l'intensite mesuree des positons, on peut evaluer la modulation solaire des positons, et aussi des negatons, puisque la modulation des negatons est probablement la meme que celle des positons. Par le calcul, a partir du bruit de fond radio, du flux des electrons a l'exterieur du systeme solaire et sa confrontation avec le flux observe a l'orbite de la Terre permet l'etude de la modulation solaire des electrons. On peut aussi analyser ce phenomene de modulation pour l'etude de ses variations au cours du cycle solaire. Ces diverses methodes donnent des resultats compatibles. En depit de la precision mediocre des donnees experimentales, on peut caracteriser la modulation par: une

Contribution to the micrographic study of uranium and its alloys; Contribution a l'etude micrographique de l'uranium et de ses alliages

Energy Technology Data Exchange (ETDEWEB)

Monti, H [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

1956-06-15

The present report is the result of research carried out by the radio metallurgy section, to perfect micrographic techniques applicable to the study of samples of irradiated uranium. In the first part of this work, two polishing baths are developed, having the qualities with a minimum of disadvantages inherent in their respective compositions: they are, on the one hand perchloric acid-ethanol mixtures, and on the other hand a phospho-chromic-ethanol bath. In the chapter following, the micrographic attack of uranium is studied. The only satisfactory process is oxidation by cathode bombardment forming epitaxic layers. In the third chapter, an attempt is made to characterise the different surface states of the uranium by dissolution potential measurements and electronic diffraction. In the fourth chapter are given some examples of the application of these techniques to the micrographic study of various uranium alloys. In an appendix, it is shown how the chemical oxidation after phospho-chromic-alcohol polishing allows the different inclusions present in the molten uranium to be distinguished. By X-ray diffraction, uranium monocarbide and mononitride inclusions in particular are characterised. (author) [French] Le present rapport est le resultat de recherches effectuees au service de radiometallurgie pour la mise au point de techniques micrographiques applicables a l'etude d'echantillons d'uranium irradie. Dans la premiere partie de ce travail, nous mettons au point deux bains de polissage qui presentent les qualites inherentes a leur composition respective, avec le minimum d'inconvenients: ce sont d'une part des melanges acide perchlorique-ethanol, et d'autre part un bain phospho-chromique-ethanol. Dans le chapitre suivant, nous etudions l'attaque micrographique de l'uranium. Seul le procede d'oxydation par bombardement cathodique formant des couches epitaxiques, est satisfaisant. Dans le troisieme chapitre, nous essayons de caracteriser les differents etats de