Recoil curve properties and coercive force decrease ratio in NdFeB sintered magnets

Energy Technology Data Exchange (ETDEWEB)

Matsuura, Yutaka, E-mail: Yutaka_Matsuura@hitachi-metals.co.jp; Kitai, Nobuyuki; Ishii, Rintaro; Natsumeda, Toshimitsu; Hoshijima, Jun

2013-11-15

It is examined that whether a reverse domain and magnetic domain wall exist in a lower demagnetization area than the coercive force and whether the observed demagnetization ratio curve can be explained using the alignment distribution function or not. From measurements of the recoil curve in the low demagnetization field, it was confirmed that minor demagnetization occurred in every demagnetization field and magnets of every grade of coercive force. The alignment distribution of Nd{sub 2}Fe{sub 14}B grains was also measured by electron back-scattering diffraction (EBSD). The alignments and the coercive force decrease ratios were calculated using these alignment distributions. These data were compared against the results obtained from magnetization measurements. From EBSD data, it was found that the alignment distributions of magnets used in this experiment were close to a Gaussian distribution. It was also found that there was no difference in the alignment distribution between magnets with Dy and without Dy, even though the coercive force decrease ratios were Dy dependent. The calculated alignments using the alignment distribution functions were close to the values of magnetization measurements. However, it was found that the calculated coercive force decrease ratios were different from the results obtained from magnetization measurement. - Highlights: • Reverse magnetic domains already exist lower magnetic field than coercive force. • Demagnetization happens not only from surface but also from inside of magnets. • Calculated alignment agrees well with that of the magnetic properties measurement. • Coercive force decrease ratio could not explain from alignment distribution. • We could not find any difference with and without Dy magnets in alignment distribution.

The origin of the coercivity reduction of Nd–Fe–B sintered magnet annealed below an optimal temperature

International Nuclear Information System (INIS)

Akiya, T.; Sasaki, T.T.; Ohkubo, T.; Une, Y.; Sagawa, M.; Kato, H.; Hono, K.

2013-01-01

In order to understand the origin of the coercivity reduction in a sintered Nd–Fe–B magnet that is annealed below an optimal annealing temperature, we performed focused ion beam/scanning electron microscopy tomography of post-sinter annealed magnets. A number of grain boundary cracks were observed between Nd 2 Fe 14 B grains and Nd-rich phases in the sample annealed below the optimal temperature. We deduced micromagnetic parameters α and N eff by fitting the temperature dependence of the coercivity. While α was constant regardless of the annealing conditions, N eff increased in the sample annealed below the optimal temperature with the reduced coercivity. This indicates that the reduction of the coercivity is due to the local stray field at the cracks. - Highlights: • We performed FIB/SEM tomography of post-sinter annealed magnets. • A number of grain boundary cracks were observed in the low-coercivity sample. • Parameters α and N eff were deduced from the temperature dependence of coercivity. • While α was constant, N eff increased in the low-coercivity sample. • The reduction of the coercivity is due to the local stray field at the cracks

Coercivity of magneto-optical media by spin dynamics

International Nuclear Information System (INIS)

Suits, J.C.

1990-01-01

Spin dynamics computer simulations have been carried out to study the effect of pinning on domain-wall motion in TbFeCo-like media. These calculations were done on a 30x30x1 mesh, where the spin direction at each lattice site was calculated with the Landau--Lifshitz--Gilbert equation. The simulations were made in an IBM 3090 mainframe--personal computer environment where the result of the calculation is a movie that runs at three frames/second on an AT and shows graphically the domain-wall--defect interaction. The domain wall is caused to move in an external field toward a defect, and the maximum field that pins the domain wall was observed. The defects have finite length and zero magnetization, which correspond to voids or nonmagnetic second phase in the media. The simulation shows that small defects on the order of 100 A in size can pin walls with pinning strength appropriate to the coercivity of magneto-optical media, i.e., local coercivities in the range 1--10 kOe. For sufficiently high fields a single wall may break up into two separate sections at the defect, and then join together beyond the defect to become a single wall again. For rectangular defects, the coercivity depends strongly and nearly linearly on defect length (parallel to the domain-wall surface) and only weakly on defect width for widths greater than about 50 A (perpendicular to the wall surface)

Tuning coercivity in CoCrPt-SiO{sub 2} hard disk material

Energy Technology Data Exchange (ETDEWEB)

Strache, Thomas; Lenz, Kilian; Fassbender, Juergen [Forschungszentrum Dresden-Rossendorf, Institute of Ion Beam Physics and Materials Research, P.O. Box 51 01 19, 01314 Dresden (Germany); Tibus, Stefan [University of Konstanz, Department of Physics, 78457 Konstanz (Germany); Chemnitz University of Technology, Institute of Physics, 09107 Chemnitz (Germany); Springer, Felix [University of Konstanz, Department of Physics, 78457 Konstanz (Germany); Rohrmann, Hartmut [OC Oerlikon Balzers, AG Data Storage, P.O. Box 1000, 9496 Balzers (Liechtenstein); Albrecht, Manfred [Chemnitz University of Technology, Institute of Physics, 09107 Chemnitz (Germany)

2009-07-01

In order to increase the storage density of modern computer disk drives and to push the superparamagnetic limit to the smallest achievable bit sizes further, smaller grains with even larger magnetic anisotropies are required, which are accompanied by large coercive fields obstructing the writing process. One route to overcome this problem is to independently reduce the coercive field without altering anisotropy and remanence by tailoring the intergranular exchange in granular CoCrPt-SiO{sub 2} films. Here we demonstrate that by means of ion implantation of Co and Ne a continuous reduction of the coercive field can be achieved without significant modification of the remaining magnetic parameters. In addition to the magnetization reversal behavior of the entire film investigated by magneto-optic Kerr effect and SQUID magnetometry, also the magnetic domain configuration in the demagnetized state is imaged by magnetic force microscopy.

Influence of measuring temperature in size dependence of coercivity in nanostructured alloys

International Nuclear Information System (INIS)

Lopez, M.; Marin, P.; Kulik, T.; Hernando, A.

2005-01-01

An increase of coercive field with decreasing particle size has been observed in ball milled nanocomposite of Fe-rich nanocrystals embedded in an amorphous matrix. Previous works (J. Appl. Phys. 64 (1998) 6044) have concluded that for high lattice strain, , the increase of coercivity is due to the magnetoelastic anisotropy generated by . Even though other effects can also be involved, the experimental results seem to indicate that the influence of the particle size on the average structural anisotropy noticeably contributes to the hardening observed for low . The influence of measuring temperature in size dependence of coercivity in nanostructured alloys has been analyzed. Some analogies and differences in respect of that observed in partially nanocrystallized samples have been found

The effect of sputter-deposition conditions on the coercive force in amorphous rare-earth - transition-metal thin films

International Nuclear Information System (INIS)

Davies, C.F.; Somekh, R.E.; Evetts, J.E.; Storey, P.A.

1988-01-01

The origins of the coercive force in amorphous rare earth - transition metal films have been investigated, the results being discussed in terms of how the growth conditions of the sputter-deposited films determine the pinning features which cause the coercive force. The authors have studied the variation of coercive force with film thickness and developed a model which enables a local pinning force per unit area to be deduced. This suggests that it should be possible to increase the coercive force by breaking up the microstructure with a multi-layered structure. An increase in coercive force obtained by making such structures with tungsten is described. They also report on the reduction in coercive force obtained when the films are deposited in the presence of a perpendicular magnetic field

Angular dependence of coercivity in isotropically aligned Nd-Fe-B sintered magnets

Science.gov (United States)

Matsuura, Yutaka; Nakamura, Tetsuya; Sumitani, Kazushi; Kajiwara, Kentaro; Tamura, Ryuji; Osamura, Kozo

2018-05-01

In order to understand the coercivity mechanism in Nd-Fe-B sintered magnets, the angular dependence of the coercivity of an isotropically aligned Nd15Co1.0B6Febal. sintered magnet was investigated through magnetization measurements using a vibrating sample magnetometer. These results are compared with the angular dependence calculated under the assumption that the magnetization reversal of each grain follows the Kondorskii law or, in other words, the 1/cos θ law for isotropic alignment distributions. The calculated angular dependence of the coercivity agrees very well with the experiment for magnetic fields applied between angles of 0 and 60°, and it is expected that the magnetization reversal occurs in each grain individually followed the 1/cos θ law. In contrast, this agreement between calculation and experiment is not found for anisotropic Nd-Fe-B samples. This implies that the coercivity of the aligned magnets depends upon the de-pinning of the domain walls from pinning sites. When the de-pinning occurs, it is expected that the domain walls are displaced through several grains at once.

Observation of high coercive fields in chemically synthesized coated Fe-Pt nanostructures

Energy Technology Data Exchange (ETDEWEB)

Dalavi, Shankar B.; Panda, Rabi N., E-mail: rnp@goa.bits-pilani.ac.in

2017-04-15

Nanocrystalline Fe-Pt alloys have been synthesized via chemical reduction route using various capping agents; such as: oleic acid/oleylamine (route-1) and oleic acid/CTAB (route-2). We could able to synthesize Fe50Pt and Fe54Pt alloys via route 1 and 2, respectively. As-prepared Fe-Pt alloys crystallize in disordered fcc phase with crystallite sizes of 2.3 nm and 6 nm for route-1 and route-2, respectively. Disordered Fe-Pt alloys were transformed to ordered fct phase after annealing at 600 °C. SEM studies confirm the spherical shape morphologies of annealed Fe-Pt nanoparticles with SEM particle sizes of 24.4 nm and 21.2 nm for route-1 and route-2, respectively. TEM study confirms the presence of 4.6 nm particles for annealed Fe50Pt alloys with several agglomerating clusters of bigger size and appropriately agrees well with the XRD study. Room temperature magnetization studies of as-prepared Fe-Pt alloys (fcc) show ferromagnetism with negligible coercivities. Average magnetic moments per particle for as-prepared Fe-Pt alloys were estimated to be 753 μ{sub B} and 814 μ{sub B}, for route 1 and 2, respectively. Ordered fct Fe-Pt alloys show high values of coercivities of 10,000 Oe and 10,792 Oe for route-1 and route-2, respectively. Observed magnetic properties of the fct Fe-Pt alloys nps were interpreted with the basis of order parameters, size, surface, and composition effects. - Highlights: • Synthesis of capped nanocrystalline Fe-Pt alloys via chemical routes. • Ordered fct phase were obtained at 600 °C. • Microstructural studies were carried out using SEM and TEM. • Investigation on evolution of magnetic properties from fcc to fct state. • Maximum values of coercivities up to 10,792 Oe were observed.

Coercive diplomacy

DEFF Research Database (Denmark)

Jakobsen, Peter Viggo

2016-01-01

separate strategic eras with distinct challenges and theoretical developments are identified since the field’s emergence in the 1960s: the Cold War, the humanitarian 1990s, the war on terror and the hybrid future. The record clearly shows that skilful use of coercive diplomacy can resolve crises...

The coercivity mechanism of Pr–Fe–B nanoflakes prepared by surfactant-assisted ball milling

Energy Technology Data Exchange (ETDEWEB)

Zuo, Wen-Liang, E-mail: wlzuo@iphy.ac.cn; Zhang, Ming; Niu, E.; Shao, Xiao-Ping; Hu, Feng-Xia; Sun, Ji-Rong; Shen, Bao-Gen, E-mail: shenbg@aphy.iphy.ac.cn

2015-09-15

The strong (00l) textured Pr{sub 12+x}Fe{sub 82−x}B{sub 6} (x=0, 1, 2, 3, 4) nanoflakes with high coercivity were prepared by surfactant-assisted ball milling (SABM). The thickness and length of the flakes are mainly in the range of 50−200 nm and 0.5−2 μm, respectively. A coercivity of 4.16 kOe for Pr{sub 15}Fe{sub 79}B{sub 6} nanoflakes was obtained, which is the maximum coercivity of R{sub 2}Fe{sub 14}B (R=Pr, Nd) nanoflakes or nanoparticles reported up to now. The results of XRD and SEM for the aligned Pr{sub 15}Fe{sub 79}B{sub 6} nanoflakes indicate that a strong (00l) texture is obtained and the easy magnetization direction is parallel to the surface of the flakes. The angular dependence of coercivity for aligned sample indicates that the coercivity mechanism of the as-milled nanoflakes is mainly dominated by domain wall pinning. Meanwhile, the field dependence of coercivity, isothermal (IRM) and dc demagnetizing (DCD) remanence curves also indicate that the coercivity is mainly determined by domain wall pinning, and nucleation also has an important effect. In addition, the mainly interaction of flakes is dipolar coupling. The research of coercivity mechanism for Pr{sub 15}Fe{sub 79}B{sub 6} nanoflakes is important for guidance the further increase its value, and is useful for the future development of the high performance nanocomposite magnets and soft/hard exchange spring magnets. - Highlights: • A coercivity of 4.16 kOe for Pr{sub 15}Fe{sub 79}B{sub 6} nanoflakes was obtained. • The strong (00l) textured is obtained for Pr{sub 15}Fe{sub 79}B{sub 6} nanoflakes. • The interaction of nanoflakes is mainly dipolar coupling. • Domain wall pinning is the mainly coercivity mechanism.

Temperature dependence of the coercive field of gas atomized Fe{sub 73.5}Si{sub 13.5}B{sub 9}Nb{sub 3}Cu{sub 1}

Energy Technology Data Exchange (ETDEWEB)

Garcia-Escorial, A., E-mail: age@cenim.csic.es [CENIM-CSIC, Avda, Gregorio del Amo, 8, 28040 Madrid (Spain); Lieblich, M. [CENIM-CSIC, Avda, Gregorio del Amo, 8, 28040 Madrid (Spain); Hernando, A.; Aragon, A.; Marin, P. [Instituto de Magnetismo Aplicado, IMA, P.O. Box 155, 28230 Madrid (Spain)

2012-09-25

Highlights: Black-Right-Pointing-Pointer An anomalous thermal dependence of the coercive field of gas atomized Fe{sub 73.5}Si{sub 13.5}B{sub 9}Nb{sub 3}Cu{sub 1} powder particles under 25 {mu}m powder particle, increasing Hc as temperature increases. Black-Right-Pointing-Pointer It is proposed that Cu rich regions at inter-grain boundaries could act as exchange decoupling regions contributing to the thermal increase of coercivity. Black-Right-Pointing-Pointer This anomalous thermal dependence points out that tailoring microstructure and size, by controlling the cooling rate of more adequate multiphase systems, could be a promising procedure to develop soft or hard magnets, avoiding Rare Earths metals that is nowadays an important target for the engineering of magnetic materials. - Abstract: In this work, the dependence of the coercive field of Fe{sub 73.5}Si{sub 13.5}B{sub 9}Nb{sub 3}Cu{sub 1} gas atomized powder with the temperature for different particle sizes has been studied, observing an anomalous behavior in the under 25 powder particle size fraction. This unusual behavior is related with the microstructure of the powder, and is attributed to the presence of a multiphase magnetic system, with non-magnetic regions decoupling the ferromagnetic domains.

Coercivity and induced magnetic anisotropy by stress and/or field annealing in Fe- and Co- based (Finemet-type) amorphous alloys

International Nuclear Information System (INIS)

Miguel, C.; Zhukov, A.; Val, J.J. del; Gonzalez, J.

2005-01-01

Uniaxial magnetic anisotropy has been induced in amorphous Fe 73.5 Cu 1 Nb 3 Si 15.5 B 7 (Fe-rich) and (Co 77 Si 13.5 B 9.5 ) 90 Fe 7 Nb 3 (Co-rich) ferromagnetic alloys by annealing under stress and/or magnetic field. Such anisotropy plays a crucial role on the magnetization process and, consequently, determine the future applications of these materials. The mechanisms involved on the origin of such induced magnetic anisotropy showed significant differences between Fe-rich and Co-rich amorphous alloys. This work provides a comparative study of the coercive field and induced magnetic anisotropy in Fe-rich and Co-rich (Finemet) amorphous alloys treated by stress and/or field

Superparamagnetism and coercivity in HCP-Co nanoparticles dispersed in silica matrix

Energy Technology Data Exchange (ETDEWEB)

Julian Fernandez, C. de E-mail: dejulian@padova.infm.it; Mattei, G.; Sangregorio, C.; Battaglin, C.; Gatteschi, D.; Mazzoldi, P

2004-05-01

The magnetic properties of Co HCP nanoparticles dispersed in a silica matrix with sizes between 2{+-}0.7 and 5{+-}2.2 nm were investigated. The temperature dependence of zero-field cooled and field cooled magnetizations and of the coercive field were analyzed considering the thermal activated demagnetization process. Enhanced anisotropy was observed for the 2 nm nanoparticles, while the demagnetization process of the larger ones is dominated by interparticle interactions.

Giant coercivity in ferromagnetic Co doped ZnO single crystal thin film

International Nuclear Information System (INIS)

Loukya, B.; Negi, D.S.; Dileep, K.; Kumar, N.; Ghatak, Jay; Datta, R.

2013-01-01

The origin of ferromagnetism in ZnO doped with transition metal impurities has been discussed extensively and appeared to be a highly controversial and challenging topic in today's solid state physics. Magnetism observed in this system is generally weak and soft. We have grown Co:ZnO up to 30 at% Co in single crystal thin film form on c-plane sapphire. A composition dependent coercivity is observed in this system which reaches peak value at 25 at% Co, the values are 860 Oe and 1149 Oe with applied field along parallel and perpendicular to the film substrate interface respectively. This giant coercivity might pave the way to exploit this material as a magnetic semiconductor with novel logic functionalities. The findings are explained based on defect band itinerant ferromagnetism and its partial interaction with localized d electrons of Co through charge transfer. Besides large coercivity, an increase in the band gap with Co concentration has also been observed along with blue emission peak with long tail confirming the formation of extended point defect levels in the host lattice band gap. - Highlights: • Co doped ZnO ferromagnetic single crystal thin film. • Giant coercivity in Co:ZnO thin film which may help to turn this material into application. • Cathodoluminescence (CL) data showing increase in band gap with Co concentrations. • A theoretical proposal is made to explain the observed giant coercivity

Superparamagnetism and coercivity in HCP-Co nanoparticles dispersed in silica matrix

International Nuclear Information System (INIS)

Julian Fernandez, C. de; Mattei, G.; Sangregorio, C.; Battaglin, C.; Gatteschi, D.; Mazzoldi, P.

2004-01-01

The magnetic properties of Co HCP nanoparticles dispersed in a silica matrix with sizes between 2±0.7 and 5±2.2 nm were investigated. The temperature dependence of zero-field cooled and field cooled magnetizations and of the coercive field were analyzed considering the thermal activated demagnetization process. Enhanced anisotropy was observed for the 2 nm nanoparticles, while the demagnetization process of the larger ones is dominated by interparticle interactions

Temperature dependence of coercivity behavior in iron films on silicone oil surfaces

International Nuclear Information System (INIS)

Xu Xiaojun; Ye Quanlin; Ye Gaoxiang

2007-01-01

A new iron film system, deposited on silicone oil surfaces by vapor phase deposition method, has been fabricated and its microstructure as well as magnetic properties has been studied. It is found that the temperature dependence of the coercive field H c (T) of the films exhibits a peak around a critical temperature T crit =10-15 K: for the temperature T crit ,H c (T) increases with the temperature; if T>T crit , however, it decreases rapidly and then approaches a steady value as T further increases. Our study shows that, for T>T crit , the observed coercivity behavior is mainly dominated by the effect of the non-uniform single-domain particle size distribution, and for T crit , the anomalous coercivity behavior may be resulted from the surface anisotropy, the surface effect and the characteristic internal stress distribution in the films. The influence of the shape and size of the particles on the thermal dependence of the magnetization is also investigated

Local coercive force of domain boundaries

International Nuclear Information System (INIS)

Kandaurova, G.S.; Vas'kovskij, V.O.

1980-01-01

The aim of the present paper is to show the variety of effects resulting from local coercivity using RFeO 3 orthoferrites crystals-plates, to separate factors which are not directly connected with the nature of every single defect but influence significantly Hsub(cw) local coercivity and, at last, to attract attention of physisists-theorists to new tasks of the magnetic hysteresis theory. Measurements have been carried out on a great number of defect of YFeO 3 and PyFeO 3 crystals. Such peculiarities of local coercivity as Hsub(cw) anisotropy and asymmetry, Hsub(cw) nonstability and its dependence on the sample magnetic prehistory. Qualitative explanation of these effects in based on the presumable interaction of the domain wall with magnetic heterogeneities existing in a region of structural defects

Modulation of magnetic coercivity in Ni thin films by reversible control of strain

Energy Technology Data Exchange (ETDEWEB)

Lin, Wen-Chin, E-mail: wclin@ntnu.edu.tw [Department of Physics, National Taiwan Normal University, Taipei 116, Taiwan (China); Huang, Chia-Wei; Ting, Yi-Chieh; Lo, Fang-Yuh [Department of Physics, National Taiwan Normal University, Taipei 116, Taiwan (China); Chern, Ming-Yau [Department of Physics, National Taiwan University, Taipei 106, Taiwan (China)

2015-05-01

In this study, we demonstrated the magnetoelectric control of magnetic thin films. (111)-textured Pd/Ni/Pd thin films were prepared on mica/lead zirconium titanate (PZT) substrates for the investigation. The reversible modulation of magnetic coercivity in Ni films was observed through the electric-voltage-controlled strain variation from the PZT substrate. For 14 nm Ni film, the applied electric field of ±350 V/m led to ±0.5% strain variation of PZT, which was transferred to ±0.4% strain variation of Pd/Ni/Pd thin films on mica, and resulted in ∓17 Oe (∓5% of the preliminary magnetic coercivity). The reversible modulation of magnetic coercivity is supposed to be caused by the voltage-controlled strain through the magneto-elastic effect. - Highlights: • The magnetoelectric control of the magnetic coercivity of Pd/Ni/Pd thin films was demonstrated. • The ±0.4% strain variation of 14 nm Ni thin films resulted in ±17 Oe change of H{sub c}. • The reversible modulation of H{sub c} is supposed to be caused by the magneto-elastic effect.

Coercive treatment and autonomy in psychiatry.

Science.gov (United States)

Sjöstrand, Manne; Helgesson, Gert

2008-02-01

There are three lines of argument in defence of coercive treatment of patients with mental disorders: arguments regarding (1) societal interests to protect others, (2) the patients' own health interests, and (3) patient autonomy. In this paper, we analyse these arguments in relation to an idealized case, where a person with a mental disorder claims not to want medical treatment for religious reasons. We also discuss who should decide what in situations where patients with mental disorders deny treatment on seemingly rational grounds. We conclude that, in principle, coercive treatment cannot be defended for the sake of protecting others. While coercive actions can be acceptable in order to protect close family and others, medical treatment is not justified for such reasons but should be given only in the interest of patients. Coercive treatment may be required in order to promote the patient's health interests, but health interests have to waive if they go against the autonomous interests of the patient. We argue that non-autonomous patients can have reasons, rooted in their deeply-set values, to renounce compulsory institutional treatment, and that such reasons should be respected unless it can be assumed that their new predicaments have caused them to change their views.

Local coercive force of domain boundaries

Energy Technology Data Exchange (ETDEWEB)

Kandaurova, G S; Vas' kovskii, V O [Ural' skij Gosudarstvennyj Univ., Sverdlovsk (USSR)

1980-04-01

The aim of the present paper is to show the variety of effects resulting from local coercivity using RFeO/sub 3/ orthoferrites crystals-plates, to separate factors which are not directly connected with the nature of every single defect but influence significantly H/sub cw/ local coercivity and, at last, to attract attention of physisists-theorists to new tasks of the magnetic hysteresis theory. Measurements have been carried out on a great number of defect of YFeO/sub 3/ and PyFeO/sub 3/ crystals. Such peculiarities of local coercivity as H/sub cw/ anisotropy and asymmetry, H/sub cw/ nonstability and its dependence on the sample magnetic prehistory. Qualitative explanation of these effects in based on the presumable interaction of the domain wall with magnetic heterogeneities existing in a region of structural defects.

Research and development programme of the EC in the field of raw materials 1982 to 1985

International Nuclear Information System (INIS)

Anon.

1982-01-01

Brussels: The EC Cabinet Council was presented a research and development programme in the field of raw materials for the years 1982 to 1985 which covers programmes already running and new actions as an overlapping raw material research programme of the EC. The new programme is divided up into 7 subprogrammes: I) metals and minerals (formerly: primary raw materials, II) uranium, III) ceramics, IV) wood as a renewable raw material, V) recycling of wastes (house and industry, VI) regaining of non-iron metals, VII) substitution. For the continuing of running actions and for beginning new projects in the 4 years plan, a total of 17 million ECU are to be allocated in the budget of the EC which will be used in cost sharing contracts or for coordinative projects. (orig./UA) [de

On the Issue of the Concept "Coercive Criminality"

Directory of Open Access Journals (Sweden)

Pestereva Y. S.

2014-04-01

Full Text Available The article deals with the actual problems relating to the concept of coercive criminality. Here is determined the lexical scope of the concept "coercion"; the philosophical and criminal law contents of the researched term are compared; the types of the coercive criminality are determined.

Enhancement of the coercivity in Co-Ni layered double hydroxides by increasing basal spacing.

Science.gov (United States)

Zhang, Cuijuan; Tsuboi, Tomoya; Namba, Hiroaki; Einaga, Yasuaki; Yamamoto, Takashi

2016-09-14

The magnetic properties of layered double hydroxides (LDH) containing transition metal ions can still develop, compared with layered metal hydroxide salts which exhibit structure-dependent magnetism. In this article, we report the preparation of a hybrid magnet composed of Co-Ni LDH and n-alkylsulfonate anions (Co-Ni-CnSO3 LDH). As Co-Ni LDH is anion-exchangeable, we can systematically control the interlayer spacing by intercalating n-alkylsulfonates with different carbon numbers. The magnetic properties were examined with temperature- and field-dependent magnetization measurements. As a result, we have revealed that the coercive field depends on the basal spacing. It is suggested that increasing the basal spacing varies the competition between the in-plane superexchange interactions and long-range out-of-plane dipolar interactions. Moreover, a jump in the coercive field at around 20 Å of the basal spacing is assumed to be the modification of the magnetic ordering in Co-Ni-CnSO3 LDH.

Coercive Diplomacy: Countering War-Threatening Crises and Armed Conflicts

DEFF Research Database (Denmark)

Jakobsen, Peter Viggo

2015-01-01

Nowadays states rarely resort to war to defeat each other or to address war-threatening crises and armed conflicts. Instead, coercive diplomacy has emerged as their strategy of choice when persuasion and other non-military instruments fall short. Coercive diplomacy involves the use of military...... threats and/or limited force (sticks) coupled with inducements and assurances (carrots) in order to influence the opponent to do something it would prefer not to. States use coercive diplomacy in the hope of achieving their objectives without having to resort to full-scale war. This chapter presents...... the strategy of coercive diplomacy and its requirements for success and shows how states have employed it to manage crises and conflicts during the three strategic eras that the world has passed through since the end of the Cold War....

Coercivity in SmCo hard magnetic films for MEMS applications

Energy Technology Data Exchange (ETDEWEB)

Pina, E. [Instituto de Magnetismo Aplicado, RENFE-UCM, Universidad Complutense de Madrid, P.O. Box 155, 28230 Las Rozas, Madrid (Spain)]. E-mail: epina@renfe.es; Palomares, F.J. [Instituto de Ciencia de Materiales de Madrid-CSIC, c/ Sor Juana Ines de la Cruz s/n, 28049 Madrid (Spain); Garcia, M.A. [Instituto de Magnetismo Aplicado, RENFE-UCM, Universidad Complutense de Madrid, P.O. Box 155, 28230 Las Rozas, Madrid (Spain); Cebollada, F. [Departamento de Fisica Aplicada a las Telecomunicaciones, EUITT-UPM, Crtra. De Valencia km 7, 28031 Madrid (Spain); Hoyos, A. de [Instituto de Magnetismo Aplicado, RENFE-UCM, Universidad Complutense de Madrid, P.O. Box 155, 28230 Las Rozas, Madrid (Spain); Romero, J.J. [Instituto de Magnetismo Aplicado, RENFE-UCM, Universidad Complutense de Madrid, P.O. Box 155, 28230 Las Rozas, Madrid (Spain); Hernando, A. [Instituto de Magnetismo Aplicado, RENFE-UCM, Universidad Complutense de Madrid, P.O. Box 155, 28230 Las Rozas, Madrid (Spain); Unidad asociada ICMM-IMA. P.O. Box 155, 28230 Las Rozas Madrid (Spain); Gonzalez, J.M. [Unidad asociada ICMM-IMA. P.O. Box 155, 28230 Las Rozas Madrid (Spain)

2005-04-15

In this work we have investigated the thermal dependence of coercivity in 1.5 {mu}m thick SmCo{sub 5} films fabricated by sputtering technique. Samples were deposited onto Si substrates kept at different temperatures. Samples grown below 450 deg. C are amorphous, present low coercivity and require further crystallization processes in order to obtain the 1:5 SmCo hard phase. Samples grown at 450 deg. C are nanocrystalline in the as-deposited state and exhibit high room temperature in-plane coercivity. Correlation between the thermal dependence of coercivity and the nanostructure has been analyzed in the frame of the so-called micromagnetic model.

Coercivity in SmCo hard magnetic films for MEMS applications

International Nuclear Information System (INIS)

Pina, E.; Palomares, F.J.; Garcia, M.A.; Cebollada, F.; Hoyos, A. de; Romero, J.J.; Hernando, A.; Gonzalez, J.M.

2005-01-01

In this work we have investigated the thermal dependence of coercivity in 1.5 μm thick SmCo 5 films fabricated by sputtering technique. Samples were deposited onto Si substrates kept at different temperatures. Samples grown below 450 deg. C are amorphous, present low coercivity and require further crystallization processes in order to obtain the 1:5 SmCo hard phase. Samples grown at 450 deg. C are nanocrystalline in the as-deposited state and exhibit high room temperature in-plane coercivity. Correlation between the thermal dependence of coercivity and the nanostructure has been analyzed in the frame of the so-called micromagnetic model

Angular dependence of coercivity with temperature in Co-based nanowires

Energy Technology Data Exchange (ETDEWEB)

Bran, C., E-mail: cristina.bran@icmm.csic.es [Institute of Materials Science of Madrid, CSIC, 28049 Madrid (Spain); Espejo, A.P. [Departamento de Física, Universidad de Santiago de Chile (USACH) and Center for the Development of Nanoscience and Nanotechnology (CEDENNA), Avenida Ecuador 3493, 9170124 Santiago (Chile); Palmero, E.M. [Institute of Materials Science of Madrid, CSIC, 28049 Madrid (Spain); Escrig, J. [Departamento de Física, Universidad de Santiago de Chile (USACH) and Center for the Development of Nanoscience and Nanotechnology (CEDENNA), Avenida Ecuador 3493, 9170124 Santiago (Chile); Vázquez, M. [Institute of Materials Science of Madrid, CSIC, 28049 Madrid (Spain)

2015-12-15

The magnetic behavior of arrays of Co and CoFe nanowire arrays has been measured in the temperature range between 100 and 300 K. We have paid particular attention to the angular dependence of magnetic properties on the applied magnetic field orientation. The experimental angular dependence of coercivity has been modeled according to micromagnetic analytical calculations, and we found that the propagation of a transversal domain wall mode gives the best fitting with experimental observations. That reversal mode holds in the whole measuring temperature range, for nanowires with different diameters and crystalline structure. Moreover, the quantitative strength of the magnetocrystalline anisotropy and its magnetization easy axis are determined to depend on the crystalline structure and nanowires diameter. The evolution of the magnetocrystalline anisotropy with temperature for nanowires with different composition gives rise to an opposite evolution of coercivity with increasing temperature: it decreases for CoFe while it increases for Co nanowire arrays.

Low-energy mechanically milled τ-phase MnAl alloys with high coercivity and magnetization

International Nuclear Information System (INIS)

Lu, Wei; Niu, Junchao; Wang, Taolei; Xia, Kada; Xiang, Zhen; Song, Yiming; Zhang, Hong; Yoshimura, Satoru; Saito, Hitoshi

2016-01-01

The high cost of rare earth elements makes the use of high-performance permanent magnets commercially very expensive. MnAl magnetic material is one of the most promising Rare-Earth-free permanent magnets due to its obvious characteristics. However, the coercivity of MnAl alloys produced by melt spinning followed by appropriate treatment is relatively low. In this investigation, a high coercivity up to 5.3 kOe and saturation magnetization of ∼62 emu/g (with an applied magnetic field of 19.5 kOe) were obtained in the mechanically milled τ-phase Mn_5_7Al_4_3 alloy. As milling time goes on, the coercivity firstly increases and then decreases, leading to the formation of knee-point coercivity, while the saturation magnetization decreases simultaneously. The structural imperfections such as disordering and defects play the most important role in the changes of magnetic properties of τ-phase MnAl alloys processed by low-energy mechanical milling. The present results will be helpful for the development of processing protocols for the optimization of τ-phase MnAl alloys as high performance Rare-Earth-free permanent magnets. - Highlights: • Successful fabrication of pure τ-phase Mn_5_7Al_4_3 alloy by melt spinning and low-energy ball milling processes. • High coercivity (~5.3 kOe) and magnetization (~62 emu/g) were obtained in τ-phase Mn_5_7Al_4_3 alloy. • Disordering and defects play the most important role in the changes of magnetic properties.

Low-energy mechanically milled τ-phase MnAl alloys with high coercivity and magnetization

Energy Technology Data Exchange (ETDEWEB)

Lu, Wei, E-mail: weilu@tongji.edu.cn [School of Materials Science and Engineering, Shanghai Key Lab. of D& A for Metal-Functional Materials, Tongji University, Shanghai 200092 (China); Research Center for Engineering Science, Akita University, Akita 010-8502 Japan (Japan); Niu, Junchao; Wang, Taolei; Xia, Kada; Xiang, Zhen; Song, Yiming [School of Materials Science and Engineering, Shanghai Key Lab. of D& A for Metal-Functional Materials, Tongji University, Shanghai 200092 (China); Zhang, Hong; Yoshimura, Satoru; Saito, Hitoshi [Research Center for Engineering Science, Akita University, Akita 010-8502 Japan (Japan)

2016-08-05

The high cost of rare earth elements makes the use of high-performance permanent magnets commercially very expensive. MnAl magnetic material is one of the most promising Rare-Earth-free permanent magnets due to its obvious characteristics. However, the coercivity of MnAl alloys produced by melt spinning followed by appropriate treatment is relatively low. In this investigation, a high coercivity up to 5.3 kOe and saturation magnetization of ∼62 emu/g (with an applied magnetic field of 19.5 kOe) were obtained in the mechanically milled τ-phase Mn{sub 57}Al{sub 43} alloy. As milling time goes on, the coercivity firstly increases and then decreases, leading to the formation of knee-point coercivity, while the saturation magnetization decreases simultaneously. The structural imperfections such as disordering and defects play the most important role in the changes of magnetic properties of τ-phase MnAl alloys processed by low-energy mechanical milling. The present results will be helpful for the development of processing protocols for the optimization of τ-phase MnAl alloys as high performance Rare-Earth-free permanent magnets. - Highlights: • Successful fabrication of pure τ-phase Mn{sub 57}Al{sub 43} alloy by melt spinning and low-energy ball milling processes. • High coercivity (~5.3 kOe) and magnetization (~62 emu/g) were obtained in τ-phase Mn{sub 57}Al{sub 43} alloy. • Disordering and defects play the most important role in the changes of magnetic properties.

Faculty Perceptions of and Experiences with Students' Use of Coercive Power

Science.gov (United States)

Kuhn, Kristine L.

2016-01-01

The purpose of this basic qualitative study was to understand how faculty perceive and experience students' use of coercive power in faculty-student relationships. Interviews were used to gather data from faculty members who had experienced students' use of coercive power. Data reveal that students' use of coercive power can negatively impact…

Coercivity enhancements of Nd–Fe–B sintered magnets by diffusing DyHx along different axes

International Nuclear Information System (INIS)

Ma, Tianyu; Wang, Xuejiao; Liu, Xiaolian; Wu, Chen; Yan, Mi

2015-01-01

Diffusing heavy rare earth elements along the grain boundaries (GBs) for Nd 2 Fe 14 B-type sintered magnets serves as an effective method to enhance coercivity and to minimize remanence loss simultaneously. Considering the texture anisotropy of Nd-rich GB phases, the coercivity incremental difference by diffusing DyH x fine powders along or perpendicular to the  <0 0 1 >  easy axis (c-axis) has been investigated. The coercivity increases more rapidly to 20.61 kOe (5.76 kOe higher than that of the as-sintered state) when diffusing along the c-axis than that diffusing perpendicular to c-axis (18.85 kOe, 4.00 kOe higher than the as-sintered state). Microstructural investigation reveals that Dy diffuses more easily towards the magnet inner part when treating along the c-axis than that for the perpendicular case due to the anisotropic distribution of the Nd-rich phase. This is verified by a higher Dy content at equivalent diffusing depth and a much deeper final diffusion distance. The local Dy-containing fractions with a stronger anisotropy field are richer for the magnet treated along the c-axis, leading to the much rapider coercivity enhancement. This work reveals that diffusion heavy rare earth along the c-axis is more effective to enhance coercivity for aligned Nd–Fe–B sintered magnets. (paper)

Angular dependence of coercivity derived from alignment dependence of coercivity in Nd-Fe-B sintered magnets

Directory of Open Access Journals (Sweden)

Yutaka Matsuura

2018-01-01

Full Text Available Experimental results of the alignment dependence of the coercivity in Nd-Fe-B sintered magnets showed that the angle of magnetization reversal for anisotropically aligned magnets was bigger than that obtained from the theoretical results calculated using the postulation that every grain independently reverses its magnetization direction following the 1/cos θ law. The angles of reversed magnetization (θ1 for Nd13.48Co0.55B5.76Febal. with alignment α=0.95 and for Nd12.75Dy0.84B5.81Co0.55Febal. with α=0.96 were 30° and 36°, respectively, which were very similar to that of an ideal magnet with a Gaussian distribution (σ=31° and 44°, respectively of the grain alignment. In this model, we postulated that every grain independently reversed according to the 1/cos θ law. The calculation results for the angular dependence of the coercivity using the values θ1=ω1(0°=30°, σ=31° and θ1=ω1(0°=36°, σ=44° could qualitatively and convincingly explain the observed angular dependence of the coercivity of Nd14.2B6.2Co1.0Febal. and Nd14.2Dy0.3B6.2Co1.0Febal.. It is speculated that the magnetic domain wall is pinned at grains tilted away from the easy magnetization direction, and when the magnetic domain wall de-pins from the tilted grains, the magnetic domain wall jumps through several grains. We suggest that the coercive force of the aligned magnet behaves like a low-aligned magnet owing to the magnetization reversal of the crust of the grains induced by the pinning and subsequent jumping of the magnetic domain wall.

Angular dependence of coercivity derived from alignment dependence of coercivity in Nd-Fe-B sintered magnets

Science.gov (United States)

Matsuura, Yutaka; Nakamura, Tetsuya; Sumitani, Kazushi; Kajiwara, Kentaro; Tamura, Ryuji; Osamura, Kozo

2018-01-01

Experimental results of the alignment dependence of the coercivity in Nd-Fe-B sintered magnets showed that the angle of magnetization reversal for anisotropically aligned magnets was bigger than that obtained from the theoretical results calculated using the postulation that every grain independently reverses its magnetization direction following the 1/cos θ law. The angles of reversed magnetization (θ1) for Nd13.48Co0.55B5.76Febal. with alignment α=0.95 and for Nd12.75Dy0.84B5.81Co0.55Febal. with α=0.96 were 30° and 36°, respectively, which were very similar to that of an ideal magnet with a Gaussian distribution (σ=31° and 44°, respectively) of the grain alignment. In this model, we postulated that every grain independently reversed according to the 1/cos θ law. The calculation results for the angular dependence of the coercivity using the values θ1=ω1(0°)=30°, σ=31° and θ1=ω1(0°)=36°, σ=44° could qualitatively and convincingly explain the observed angular dependence of the coercivity of Nd14.2B6.2Co1.0Febal. and Nd14.2Dy0.3B6.2Co1.0Febal.. It is speculated that the magnetic domain wall is pinned at grains tilted away from the easy magnetization direction, and when the magnetic domain wall de-pins from the tilted grains, the magnetic domain wall jumps through several grains. We suggest that the coercive force of the aligned magnet behaves like a low-aligned magnet owing to the magnetization reversal of the crust of the grains induced by the pinning and subsequent jumping of the magnetic domain wall.

Investigation of coercivity for electroplated Fe-Ni thick films

Science.gov (United States)

Yanai, T.; Eguchi, K.; Koda, K.; Kaji, J.; Aramaki, H.; Takashima, K.; Nakano, M.; Fukunaga, H.

2018-05-01

We have already reported Fe-Ni firms with good soft magnetic properties prepared by using an electroplating method. In our previous studies, we prepared the Fe-Ni films from citric-acid-based baths (CA-baths) and ammonium-chloride-based ones (AC-baths), and confirmed that the coercivity for the AC-baths was lower than that for the CA-baths. In the present study, we investigated reasons for the lower coercivity for the AC-baths to further improve the soft magnetic properties. From an observation of magnetic domains of the Fe22Ni78 films, we found that Fe22Ni78 film for AC-bath had a magnetic anisotropy in the width direction, and also found that the coercivity in the width direction was lower than the longitudinal one for the AC-bath. As an annealing for a stress relaxation in the films reduced the difference in the coercivity, we considered that the anisotropy is attributed to the magneto-elastic effect.

Coercive Sanctions and International Conflicts: A Sociological Theory

DEFF Research Database (Denmark)

Jaeger, Mark Daniel

international sanctions work, and more substantially, what are the social conditions within sanctions conflicts that are conducive to either cooperation or non-cooperation? Arguing that coercive sanctions and international conflicts are socially-constructed facts, the book explores the processes involved......Perhaps the most common question raised in the literature on coercive international sanctions is: "Do sanctions work?" Unsurprisingly, the answer to such a sweeping question remains inconclusive. Instead of asking whether sanctions work, this book addresses a more basic question: How do coercive......, and to its potential transformation. Thus it is premature to ‘predict’ the political effectiveness of sanctions simply on the basis of their economic impact. The book presents analyses of the sanctions conflicts between China and Taiwan and over Iran’s nuclear program, illustrating how negative sanctions...

Scaling of coercivity in a 3d random anisotropy model

Energy Technology Data Exchange (ETDEWEB)

Proctor, T.C., E-mail: proctortc@gmail.com; Chudnovsky, E.M., E-mail: EUGENE.CHUDNOVSKY@lehman.cuny.edu; Garanin, D.A.

2015-06-15

The random-anisotropy Heisenberg model is numerically studied on lattices containing over ten million spins. The study is focused on hysteresis and metastability due to topological defects, and is relevant to magnetic properties of amorphous and sintered magnets. We are interested in the limit when ferromagnetic correlations extend beyond the size of the grain inside which the magnetic anisotropy axes are correlated. In that limit the coercive field computed numerically roughly scales as the fourth power of the random anisotropy strength and as the sixth power of the grain size. Theoretical arguments are presented that provide an explanation of numerical results. Our findings should be helpful for designing amorphous and nanosintered materials with desired magnetic properties. - Highlights: • We study the random-anisotropy model on lattices containing up to ten million spins. • Irreversible behavior due to topological defects (hedgehogs) is elucidated. • Hysteresis loop area scales as the fourth power of the random anisotropy strength. • In nanosintered magnets the coercivity scales as the six power of the grain size.

High coercivity in rare-earth lean nanocomposite magnets by grain boundary infiltration

Energy Technology Data Exchange (ETDEWEB)

Madugundo, Rajasekhar, E-mail: mraja@udel.edu [Department of Physics and Astronomy, University of Delaware, Newark, DE 19716 (United States); Salazar-Jaramillo, Daniel [BCMaterials, Bizkaia Science and Technology Park, E-48160 Derio (Spain); Manuel Barandiaran, Jose [BCMaterials, Bizkaia Science and Technology Park, E-48160 Derio (Spain); Department of Electricity & Electronics, University of the Basque Country (UPV/EHU), E-48080 Bilbao (Spain); Hadjipanayis, George C., E-mail: hadji@udel.edu [Department of Physics and Astronomy, University of Delaware, Newark, DE 19716 (United States)

2016-02-15

A significant enhancement in coercivity was achieved by grain boundary modification through low temperature infiltration of Pr{sub 75}(Cu{sub 0.25}Co{sub 0.75}){sub 25} eutectic alloy in rare-earth lean (Pr/Nd)–Fe–B/α-Fe nanocomposite magnets. The infiltration procedure was carried out on ribbons and hot-deformed magnets at 600–650 °C for different time durations. In Nd{sub 2}Fe{sub 14}B/α-Fe ribbons, the coercivity increased from 5.3 to 23.8 kOe on infiltration for 4 h. The Pr{sub 2}Fe{sub 14}B/α-Fe hot-deformed magnet shows an increase in coercivity from 5.4 to 22 kOe on infiltration for 6 h. The increase in the coercivity comes at the expense of remnant magnetization. X-ray diffraction studies confirm the presence of both the hard Nd{sub 2}Fe{sub 14}B and soft α-Fe phases. A decrease in the soft α-Fe phase content was observed after infiltration. - Highlights: • Enhancement in coercivity was achieved by grain boundary modification. • Coercivity increased from 5.3 to 23.8 kOe in Nd{sub 2}Fe{sub 14}B/α-Fe on infiltration. • Pr{sub 2}Fe{sub 14}B/α-Fe deformed magnet shows an increase in coercivity from 5.4 to 22 kOe. • The increase in the coercivity comes at the expense of remnant magnetization. • A decrease in the soft α-Fe phase content was observed after infiltration.

Hard magnetic properties and coercivity mechanism of melt-spun Misch Metal-Fe-B alloy

Energy Technology Data Exchange (ETDEWEB)

Quan, Ningtao; Luo, Yang, E-mail: eluoyang@foxmail.com; Yan, Wenlong; Yuan, Chao; Yu, Dunbo; Sun, Liang; Lu, Shuo; Li, Hongwei; Zhang, Hongbin

2017-09-01

Highlights: • Melt-spun MM{sub 13}Fe{sub 81}B{sub 6} alloy shows that the distributions of the La, Ce, Pr, Nd, Fe and B elements is uniformly distributed, and the grain size is in the range of 30–40 nm, it can be seen that Pr-rich and La-rich phases concentrated on grain boundaries, which resulted in the coercivity augment with the increase of MMFe{sub 2} content, and the grain size is around 40–50 nm in MM{sub 16}Fe{sub 78}B{sub 6}. • There is a significant formation of MMFe{sub 2} with abundant Pr and La, and a small amount of Ce and Nd enriched at the interfacial region in MM{sub 16}Fe{sub 78}B{sub 6}, thus an inhomogeneous region was formed. It is considered that the inhomogeneous region is effective in increasing the coercivity. • The optimum-quenched MM{sub 13}Fe{sub 81}B{sub 6} alloy have been shown to exhibit a coercive force of 6.9 kOe and an energy product of 8.5 MGOe, which is superior to anisotropic ferrite magnets of 4.5 MGOe. - Abstract: Magnetic and structural properties of Misch Metal (MM)-Fe-B alloys, were examined in the melt-spun ribbons. Melt-spun MM-Fe-B samples were prepared at the surface velocities of 18–30 m/s. Crystalline structure and their room-temperature magnetization characteristics were analyzed, and the optimum surface velocity of 20 m/s and nominal composition of MM{sub 13}Fe{sub 81}B{sub 6} were obtained. Microstructural analyses indicate that the grain size is approximately 30–50 nm in the alloys with the optimum characteristics. In the MM{sub 16}Fe{sub 78}B{sub 6} alloys, Pr-rich and La-rich phases concentrated on grain boundaries, which resulted in the coercivity augment with the increase of MMFe{sub 2} content. Dependence of coercivity on applied magnetic field suggested that the mechanism of coercivity in moderate MM-content samples was inhomogeneous domain wall pinning type. The melt-spun ribbons in the optimum condition exhibit a coercive force of 6.9 kOe and an energy product of 8.5 MGOe, which can be used as

Nonlinear geometric scaling of coercivity in a three-dimensional nanoscale analog of spin ice

Science.gov (United States)

Shishkin, I. S.; Mistonov, A. A.; Dubitskiy, I. S.; Grigoryeva, N. A.; Menzel, D.; Grigoriev, S. V.

2016-08-01

Magnetization hysteresis loops of a three-dimensional nanoscale analog of spin ice based on the nickel inverse opal-like structure (IOLS) have been studied at room temperature. The samples are produced by filling nickel into the voids of artificial opal-like films. The spin ice behavior is induced by tetrahedral elements within the IOLS, which have the same arrangement of magnetic moments as a spin ice. The thickness of the films vary from a two-dimensional, i.e., single-layered, antidot array to a three-dimensional, i.e., multilayered, structure. The coercive force, the saturation, and the irreversibility field have been measured in dependence of the thickness of the IOLS for in-plane and out-of-plane applied fields. The irreversibility and saturation fields change abruptly from the antidot array to the three-dimensional IOLS and remain constant upon further increase of the number of layers n . The coercive force Hc seems to increase logarithmically with increasing n as Hc=Hc 0+α ln(n +1 ) . The logarithmic law implies the avalanchelike remagnetization of anisotropic structural elements connecting tetrahedral and cubic nodes in the IOLS. We conclude that the "ice rule" is the base of mechanism regulating this process.

Enhanced coercivity in α-(Fe,Co)/(Nd,Pr)2Fe14B nanocomposite magnets via interfacial modification

International Nuclear Information System (INIS)

Li Wei; Li Lanlan; Li Xiaohong; Sun Hongyu; Zhang Xiangyi

2008-01-01

We have prepared α-(Fe,Co)/(Nd,Pr) 2 Fe 14 B nanocomposite magnets having a high coercivity H c = 7.5 kOe and a large energy product (BH) max = 22.7 MGOe by interfacial modification using an intergranular amorphous phase, as compared with the corresponding values obtained without the intergranular phase, H c = 5.5 kOe and (BH) max = 16.1 MGOe. The enhanced coercivity is attributed to the increase in the nucleation field for magnetization reversal due to interfacial modification. This demonstrates a counter-intuitive approach for enhancing the magnetic properties of nanocomposite magnets

Coercivity enhancement in Nd-Fe-B sintered permanent magnet by Dy nanoparticles doping

Energy Technology Data Exchange (ETDEWEB)

Liu, W.Q., E-mail: liuweiqiang77@hotmail.co [College of Materials Science and Engineering, Beijing University of Technology, Beijing 100124 (China); Sun, H. [College of Materials Science and Engineering, Beijing University of Technology, Beijing 100124 (China); Yi, X.F. [Anhui Earth-panda Advance Magnetic Material Co., Ltd., Anhui 231500 (China); Liu, X.C.; Zhang, D.T. [College of Materials Science and Engineering, Beijing University of Technology, Beijing 100124 (China); Yue, M., E-mail: yueming@bjut.edu.c [College of Materials Science and Engineering, Beijing University of Technology, Beijing 100124 (China); Zhang, J.X. [College of Materials Science and Engineering, Beijing University of Technology, Beijing 100124 (China)

2010-07-02

Nd-Fe-B permanent magnets with a small amount of Dysprosium (Dy) nanoparticles doping were prepared by conventional sintered method, and the microstructure and magnetic properties of the magnets were studied. Investigation shows that the coercivity rises gradually, while the remanence decreases simultaneously with increased Dy doping amount. As a result, the magnet with 1.5 wt.% Dy exhibits optimal magnetic properties. Further investigation presumed that Dy is enriched as (Nd, Dy){sub 2}Fe{sub 14}B phase in the surface region of the Nd{sub 2}Fe{sub 14}B matrix grains indicated by the enhancement of the magneto-crystalline anisotropy field of the Nd{sub 2}Fe{sub 14}B phase. As a result, the magnet doped with a small amount of Dy nanoparticles possesses remarkably enhanced coercivity without sacrificing its magnetization noticeably.

Coercive properties of elliptic-parabolic operator

International Nuclear Information System (INIS)

Duong Min Duc.

1987-06-01

Using a generalized Poincare inequality, we study the coercive properties of a class of elliptic-parabolic partial differential equations, which contains many degenerate elliptic equations considered by the other authors. (author). 16 refs

Field measurement on the emissions of PM, OC, EC and PAHs from indoor crop straw burning in rural China

International Nuclear Information System (INIS)

Wei, Siye; Shen, Guofeng; Zhang, Yanyan; Xue, Miao; Xie, Han; Lin, Pengchuan; Chen, Yuanchen; Wang, Xilong; Tao, Shu

2014-01-01

Field measurements were conducted to measure emission factors of particulate matter (EF PM ), organic carbon (EF OC ), elemental carbon (EF EC ), 28 parent polycyclic aromatic hydrocarbons (EF 28pPAHs ), and 4 oxygenated PAHs (EF 4oPAHs ) for four types of crop straws burned in two stoves with similar structure but different ages. The average EF PM , EF OC , EF EC , EF 28pPAHs , and EF 4oPAHs were 9.1 ± 5.7 (1.8–22 as range), 2.6 ± 2.9 (0.30–12), 1.1 ± 1.2 (0.086–5.5), 0.26 ± 0.19 (0.076–0.96), 0.011 ± 0.14 (1.3 × 10 −4 – 0.063) g/kg, respectively. Much high EF 28pPAHs was observed in field compared with the laboratory derived EFs and significant difference in EF 28pPAHs was identified among different crop residues, indicating considerable underestimation when laboratory derived EFs were used in the inventory. The field measured EF PM , EF OC , and EF EC were significantly affected by stove age and the EFs of carbonaceous particles for the 15-year old stove were approximately 2.5 times of those for the 1-year old stove. Highlights: • Field measurements provided more reliable data for the inventory. • Emissions from indoor crop residue burning were measured in field. • Much high PAHs emissions were found in field measurement in comparison with laboratory derived results. • Emissions of carbonaceous particulate matter increased by 2.5 times in the old stove compared that in a new stove. -- Emissions of incomplete combustion pollutants strongly affected by the fuel type and stove usage

The enhanced coercivity for the magnetite/silica nanocomposite at room temperature

International Nuclear Information System (INIS)

Wu Mingzai; Xiong Ying; Peng Zhenmeng; Jiang Nan; Qi Haiping; Chen Qianwang

2004-01-01

Magnetite/silica nanocomposite was synthesized by a facile solvothermal processing at 150 deg. C for about 10 h. X-ray diffraction (XRD) analysis revealed the effect of annealing on the crystallinity of silica. Transmission electron microscopy (TEM) images showed the good dispersion of magnetite in the silica matrix. Magnetic properties of the nanocomposite were characterized by vibration sample magnetometer (VSM), and the enhanced coercivity was explained by the intrinsic anisotropy of the particles enhanced by the interparticle dipolar fields

Magnetization reversal mechanism and coercivity enhancement in three-dimensional granular Nd-Fe-B magnets studied by micromagnetic simulations

Science.gov (United States)

Lee, Jae-Hyeok; Choe, Jinhyeok; Hwang, Shinwon; Kim, Sang-Koog

2017-08-01

We studied the mechanism of magnetization reversals and coercivity enhancements in three-dimensional (3D) granular Nd-Fe-B permanent magnets using finite-element micromagnetic simulations. The magnetization reversals in the hard magnets consisting of hard-phase grains separated by relatively soft-phase grain boundaries were analyzed with reference to the simulation results for the magnetic field-dependent distributions of the local magnetizations. The saturation magnetization of the grain-boundary phase plays a crucial role in the transition between nucleation- and domain-wall-propagation-controlled reversal processes. The smaller the saturation magnetization of the grain-boundary phase is, the more preferable is the nucleation-controlled process, which results in a larger coercivity. The exchange stiffness of the grain-boundary phase determines the preferred paths of domain-wall propagations, whether inward into grains or along the grain boundaries for relatively small and large exchange stiffness, respectively. However, the exchange stiffness of the grain-boundary phase alone does not significantly contribute to coercivity enhancement in cases where the size of hard-phase grains is much greater than the exchange length. This work paves the way for the design of high-performance hard magnets of large coercivity and maximum-energy-product values.

Reversal mechanisms and interactions in magnetic systems: coercivity versus switching field and thermally assisted demagnetization

Directory of Open Access Journals (Sweden)

Cebollada, F.

2005-06-01

Full Text Available In this paper we present a comparative analysis of the magnetic interactions and reversal mechanisms of two different systems: NdFeB-type alloys with grain sizes in the single domain range and Fe-SiO2 nanocomposites with Fe concentrations above and below the percolation threshold. We evidence that the use of the coercivity as the main parameter to analyse them might be misleading due to the convolution of both reversible and irreversible magnetization variations. We show that the switching field and thermally assisted demagnetization allow a better understanding of these mechanisms since they involve just irreversible magnetization changes. Specifically, the experimental analysis of the coercivity adquisition process for the NdFeB-type system suggests that the magnetization reversal is nucleated at the spin misalignments present due to intergranular exchange interactions. On the other hand, the study of the magnetic viscosity and of the isothermal remanent magnetization (IRM and direct field demagnetization (DCD remanence curves indicates that the dipolar interactions are responsible for the propagation of the switching started at individual particles.

En este artículo presentamos un análisis comparativo de la influencia de la microestructura a través de las interacciones magnéticas en los mecanismos de inversión de la magnetización en dos sistemas diferentes: aleaciones tipo NdFeB con tamaños de grano en el rango de monodominio y nanocompuestos de Fe-SiO2 con concentraciones de Fe tanto por encima como por debajo del umbral de percolación. Ponemos de manifiesto que el uso del campo coercitivo como parámetro de análisis puede llevar a equívocos debido a la coexistencia de variaciones reversibles e irreversibles de la magnetización. También mostramos que el campo de conmutación y la desimanación térmicamente asistida permiten una mejor comprensión de dichos mecanismos ya que reflejan exclusivamente cambios irreversibles de

Coercive force features in stressed epitaxial ferrite-garnet films

International Nuclear Information System (INIS)

Dubinko, S.V.; Nedviga, A.S.; Vishnevskij, V.G.; Shaposhnikov, A.N.; Yagupov, V.S.; Nesteruk, A.G.; Prokopov, A.R.

2005-01-01

One has investigated into effect of a relative mismatching of periods of lattices of a film and of a substrate within 0.5-0.85% range on behavior of the coercive force of (Bi, Sm, Lu, Ca) 3 (Fe, Sc, Ga, Al) 5 O 12 composition ferrite garnet epitaxial films (FGEF) synthesized at (111) orientation gadolinium-gallium garnet substrates. One has revealed that the FGEF coercive force at increase of the relative mismatching of periods of lattices of a film and of a substrate increases at first, while when reaching the maximum value it begins to decrease. The coercive force maximum value is shown to result from the periodical localized stresses. The period of the localized stresses is determined by the value of mismatching of periods of lattices of a film and of a substrate [ru

The fabrication and the coercivity mechanism of segmented (Ni/Fe)m composite nanowire arrays

International Nuclear Information System (INIS)

Xue, D S; Shi, H G; Si, M S

2004-01-01

Arrays of segmented (Ni/Fe) m (m = 1,2,3,4,5) composite nanowires about 3 μm in length and with aspect ratios of about 60 were electrodeposited on anodic porous alumina templates using a dual bath. The structure, morphology and magnetic properties of the samples were characterized by means of x-ray diffraction, transmission electron microscopy and vibrating sample magnetometry, respectively. It is found that Fe(110) and Ni(111) orientations along nanowire axis are preferred. The large aspect ratio of the composite nanowires reveals a strong shape magnetic anisotropy. As the number of the Ni/Fe composite segments m increases, the coercivity of the nanowire arrays, with the magnetic field applied parallel to the wire, gradually increases. The coercivity variation of the segmented composite nanowires is closely related to the effective exchange coupling between the Ni and Fe segments

Variable substrate temperature deposition of CoFeB film on Ta for manipulating the perpendicular coercive forces

Science.gov (United States)

Lakshmanan, Saravanan; Rao, Subha Krishna; Muthuvel, Manivel Raja; Chandrasekaran, Gopalakrishnan; Therese, Helen Annal

2017-08-01

Magnetization of Ta/CoFeB/Ta trilayer films with thick layer of CoFeB deposited under different substrate temperatures (Ts) via ultra-high vacuum DC sputtering technique has been measured with the applied magnetic field parallel and perpendicular to the plane of the film respectively to study the perpendicular coercive forces of the film. The samples were further analyzed for its structural, topological, morphological, and electrical transport properties. The core chemical states for the elements present in the CoFeB thin film were analyzed by XPS studies. Magnetization studies reveal the existence of perpendicular coercive forces in CoFeB films deposited only at certain temperatures such as RT, 450 °C, 475 °C and 500 °C. CoFeB film deposited at 475 °C exhibited a maximum coercivity of 315 Oe and a very low saturation magnetization (Ms) of 169 emu/cc in perpendicular direction. This pronounced effect in perpendicular coercive forces observed for CoFeB475 could be attributed to the effect of temperature in enhancing the crystallization of the film at the Ta/CoFeB interfaces. However at temperatures higher than 475 °C the destruction of the Ta/CoFeB interface due to intermixing of Ta and CoFeB results in the disappearance of magnetic anisotropy.

Coercivity enhancement in HDDR near-stoichiometric ternary Nd–Fe–B powders

International Nuclear Information System (INIS)

Wan, Fangming; Han, Jingzhi; Zhang, Yinfeng; Wang, Changsheng; Liu, Shunquan; Yang, Jinbo; Yang, Yingchang; Sun, Aizhi; Yang, Fuqiang; Song, Renbo

2014-01-01

Anisotropic HDDR near-stoichiometric ternary Nd–Fe–B powders have been prepared. The coercivity of the powders was improved from 208.6 to 980.1 kA/m by the subsequent diffusion treatment using the Pr–Cu alloy. For comparison, Nd 11.5 Fe 80.7 B 6.1 Pr 1.2 Cu 0.5 alloy, in which Pr and Cu elements were directly added into the original Nd–Fe–B alloy, was also treated by the same HDDR process and the coercivity was only 557.3 kA/m. Microstructural investigations showed that a large area of (Nd, Pr)-rich phases concentrated at triangle regions in the HDDR Nd 11.5 Fe 80.7 B 6.1 Pr 1.2 Cu 0.5 powders, while the (Nd, Pr)-rich phases distributed uniformly in the diffusion treated powders. The uniform grain boundary layer can pin the motion of domain wall more effectively, resulting in a higher coercivity in diffusion treated HDDR Nd–Fe–B powders. - Highlights: • Anisotropic HDDR near-stoichiometric ternary Nd–Fe–B powders have been prepared. • The coercivity of the powders was improved from 2.62 to 12.31 kOe by the diffusion of Pr–Cu alloy. • The uniform grain boundary layer leads to a higher coercivity in diffusion treated powders

Variable substrate temperature deposition of CoFeB film on Ta for manipulating the perpendicular coercive forces

Energy Technology Data Exchange (ETDEWEB)

Lakshmanan, Saravanan; Rao, Subha Krishna [Nanotechnology Research Centre, SRM University, Kattankulathur, Chennai 603203 (India); Muthuvel, Manivel Raja [Defence Metallurgical Research Laboratory (DMRL), Hyderabad 500058 (India); Chandrasekaran, Gopalakrishnan [Nanotechnology Research Centre, SRM University, Kattankulathur, Chennai 603203 (India); Therese, Helen Annal, E-mail: helen.a@ktr.srmuniv.ac.in [Nanotechnology Research Centre, SRM University, Kattankulathur, Chennai 603203 (India)

2017-08-01

Highlights: • Ta/CoFeB(50 nm)/Ta thin films were deposited at various substrate temperatures (T{sub s}). • CoFeB films deposited at T{sub s} such as RT, 450 °C, 475 °C and 500 °C exhibited perpendicular coercivity. • CoFeB deposited at 475 °C displayed a higher coercivity of 315 Oe and a low M{sub s} of 169 emu/cc. • The enhanced crystallization of CoFeB at the Ta/CoFeB interface results in higher H{sub c} (⟂). - Abstract: Magnetization of Ta/CoFeB/Ta trilayer films with thick layer of CoFeB deposited under different substrate temperatures (T{sub s}) via ultra-high vacuum DC sputtering technique has been measured with the applied magnetic field parallel and perpendicular to the plane of the film respectively to study the perpendicular coercive forces of the film. The samples were further analyzed for its structural, topological, morphological, and electrical transport properties. The core chemical states for the elements present in the CoFeB thin film were analyzed by XPS studies. Magnetization studies reveal the existence of perpendicular coercive forces in CoFeB films deposited only at certain temperatures such as RT, 450 °C, 475 °C and 500 °C. CoFeB film deposited at 475 °C exhibited a maximum coercivity of 315 Oe and a very low saturation magnetization (M{sub s}) of 169 emu/cc in perpendicular direction. This pronounced effect in perpendicular coercive forces observed for CoFeB475 could be attributed to the effect of temperature in enhancing the crystallization of the film at the Ta/CoFeB interfaces. However at temperatures higher than 475 °C the destruction of the Ta/CoFeB interface due to intermixing of Ta and CoFeB results in the disappearance of magnetic anisotropy.

Coercivity enhancement of Nd–Fe–B sintered magnets with intergranular adding (Pr, Dy, Cu)−H{sub x} powders

Energy Technology Data Exchange (ETDEWEB)

Zhang, Yujing; Ma, Tianyu, E-mail: maty@zju.edu.cn; Liu, Xiaolian; Liu, Pan; Jin, Jiaying; Zou, Junding; Yan, Mi, E-mail: mse_yanmi@zju.edu.cn

2016-02-01

Forming Nd{sub 2}Fe{sub 14}B/(Nd, Dy){sub 2}Fe{sub 14}B core–shell structure by intergranular adding Dy-containing sources into Nd–Fe–B sintered magnets is effective to improve coercivity and to minimize remanence loss simultaneously. However, the excessive Dy located in the intergranular regions has nearly no hard magnetic contribution, causing its low utilization efficiency. In this work, diluted Dy powders (Pr{sub 37}Dy{sub 30}Cu{sub 33})–H{sub x} were prepared and incorporated into Nd–Fe–B sintered magnets via a dual-alloy approach. The coercivity increases rapidly from 15.0 to 18.2 kOe by 21.3% with 2.0 wt% (Pr, Dy, Cu)–H{sub x} addition (the equivalent Dy is only 0.32 at%). The deduced coercivity incremental ratio is 10.0 kOe per unit Dy at%. Dehydrogenation reaction of (Pr, Dy, Cu)–H{sub x} occurs during sintering, which favors Dy diffusion towards the 2:14:1 phase grains as well as smoothing the grain boundaries (GBs). The enhanced local anisotropic field and the well decoupled 2:14:1 phase grains contribute to such rapid coercivity enhancement. This work suggests that adding diluted Dy hydrides is promising for fabricating high coercivity Nd–Fe–B sintered magnets with less heavy rare-earth consumption. - Highlights: • (Pr, Dy, Cu)–H{sub x} hydride powders were introduced into Nd–Fe–B sintered magnets. • Rapid coercivity enhancement from 15.0 kOe to 18.2 kOe with only 0.32 at% Dy was realized. • High utilization efficiency of Dy was achieved due to its promoted diffusion process. • Wettability and mobility of grain boundary phase was improved.

On the angular dependence of the coercivity of NdFeB hard magnets

International Nuclear Information System (INIS)

Jahn, L.; Christoph, V.; Pastuschenko, J.S.

1989-01-01

In order to test the model assumptions on hard magnetic properties of sintered NdFeB magnets, a comparison of the measured and calculated values of the magnetization and remanence coercivities H C and H R , respectively, as a function of the angle between texture axis and external field θ in Nd 16 Fe 76 B 8 and (Nd 0.9 Tb 0.1 ) 16 Fe 76 B 8 is given and explained qualitatively

Coercivity enhancement of hot-deformed Nd-Fe-B magnets by the eutectic grain boundary diffusion process

International Nuclear Information System (INIS)

Liu, Lihua; Sepehri-Amin, H.; Ohkubo, T.; Yano, M.; Kato, A.; Shoji, T.; Hono, K.

2016-01-01

Nd-M (M = Al, Cu, Ga, Zn, Mn) alloys with compositions close to eutectic points were investigated as diffusion sources for the grain boundary diffusion process to hot-deformed Nd-Fe-B magnets. Coercivity enhancement was observed for most of the alloys. Among them, the sample processed with Nd 90 Al 10 exhibited the highest coercivity of 2.5 T at room temperature. However, the sample processed with Nd 70 Cu 30 exhibited the highest coercivity of 0.7 T at 200 ° C. Microstructural observations using scanning transmission electron microscope (STEM) showed that nonferromagnetic Nd-rich intergranular phase envelops the Nd 2 Fe 14 B grains after the diffusion process. Abnormal grain growth and the dissolution of Al into the Nd 2 Fe 14 B grains were observed in the sample processed with Nd 90 Al 10 , which explains its inferior thermal stability of coercivity compared to the sample processed with Nd 70 Cu 30 . The coercivity enhancement and poor thermal stability of the coercivity of the Nd 90 Al 10 diffusion-processed sample are discussed based on microstructure studies by transmission electron microscopy. - Highlights: • Coercivity of hot-deformed Nd-Fe-B magnets is enhanced by the infiltration of various R-TM eutectic alloys. • The sample infiltrated with Nd 90 Al 10 shows the highest coercivity of 2.5 T at room temperature. • At 200 °C, Nd 70 Cu 30 diffusion-processed sample possesses the highest coercivity of 0.7 T.

Enhanced coercivity in {alpha}-(Fe,Co)/(Nd,Pr){sub 2}Fe{sub 14}B nanocomposite magnets via interfacial modification

Energy Technology Data Exchange (ETDEWEB)

Li Wei; Li Lanlan; Li Xiaohong; Sun Hongyu; Zhang Xiangyi [State Key Laboratory of Metastable Materials Science and Technology, Yanshan University, 066004 Qinhuangdao (China)], E-mail: xyzh66@ysu.edu.cn

2008-08-07

We have prepared {alpha}-(Fe,Co)/(Nd,Pr){sub 2}Fe{sub 14}B nanocomposite magnets having a high coercivity H{sub c} = 7.5 kOe and a large energy product (BH){sub max} = 22.7 MGOe by interfacial modification using an intergranular amorphous phase, as compared with the corresponding values obtained without the intergranular phase, H{sub c} = 5.5 kOe and (BH){sub max} = 16.1 MGOe. The enhanced coercivity is attributed to the increase in the nucleation field for magnetization reversal due to interfacial modification. This demonstrates a counter-intuitive approach for enhancing the magnetic properties of nanocomposite magnets.

Assessment of vulnerability zones for ground water pollution using GIS-DRASTIC-EC model: A field-based approach

Science.gov (United States)

Anantha Rao, D.; Naik, Pradeep K.; Jain, Sunil K.; Vinod Kumar, K.; Dhanamjaya Rao, E. N.

2018-06-01

Assessment of groundwater vulnerability to pollution is an essential pre-requisite for better planning of an area. We present the groundwater vulnerability assessment in parts of the Yamuna Nagar District, Haryana State, India in an area of about 800 km2, considered to be a freshwater zone in the foothills of the Siwalik Hill Ranges. Such areas in the Lower Himalayas form good groundwater recharge zones, and should always be free from contamination. But, the administration has been trying to promote industrialization along these foothill zones without actually assessing the environmental consequences such activities may invite in the future. GIS-DRASTIC model has been used with field based data inputs for studying the vulnerability assessment. But, we find that inclusion electrical conductivity (EC) as a model parameter makes it more robust. Therefore, we rename it as GIS-DRASTIC-EC model. The model identifies three vulnerability zones such as low, moderate and high with an areal extent of 5%, 80% and 15%, respectively. On the basis of major chemical parameters alone, the groundwater in the foothill zones apparently looks safe, but analysis with the help of GIS-DRASTIC-EC model gives a better perspective of the groundwater quality in terms of identifying the vulnerable areas.

A Combined TEM/STEM and Micromagnetic Study of the Anisotropic Nature of Grain Boundaries and Coercivity in Nd-Fe-B Magnets

Directory of Open Access Journals (Sweden)

Gregor A. Zickler

2017-01-01

Full Text Available The nanoanalytical high resolution TEM/STEM investigation of the intergranular grain boundary phase of anisotropic sintered and rapidly quenched heavy rare earth-free Nd-Fe-B magnet materials revealed a difference in composition for grain boundaries parallel (large Fe-content and perpendicular (low Fe content to the alignment direction. This behaviour vanishes in magnets with a high degree of misorientation. The numerical finite element micromagnetic simulations are based on the anisotropic compositional behaviour of GBs and show a decrease of the coercive field with an increasing thickness of the grain boundary layer. The magnetization reversal and expansion of reversed magnetic domains primarily start as Bloch domain wall at grain boundaries parallel to the c-axis and secondly as Néel domain wall perpendicular to the c-axis into the adjacent hard magnetic grains. The increasing misalignment of grains leads to the loss of the anisotropic compositional behaviour and therefore to an averaged value of the grain boundary composition. In this case the simulations show an increase of the coercive field compared to the anisotropic magnet. The calculated coercive field values of the investigated magnet samples are in the order of μ0HcJ=1.8 T–2.1 T for a mean grain boundary thickness of 4 nm, which agrees perfectly with the experimental data.

Enhanced coercivity thermal stability realized in Nd–Fe–B thin films diffusion-processed by Nd–Co alloys

Energy Technology Data Exchange (ETDEWEB)

Zhong, Hui; Fu, Yanqing [Key laboratory of electromagnetic processing of materials (EPM), Ministry of Education, Northeastern University, Shenyang 110819 (China); Department of Physics and Chemistry of Materials, School of Materials Science and Engineering, Northeastern University, Shenyang 110819 (China); Li, Guojian; Liu, Tie [Key laboratory of electromagnetic processing of materials (EPM), Ministry of Education, Northeastern University, Shenyang 110819 (China); Cui, Weibin, E-mail: cuiweibin@epm.neu.edu.cn [Key laboratory of electromagnetic processing of materials (EPM), Ministry of Education, Northeastern University, Shenyang 110819 (China); Department of Physics and Chemistry of Materials, School of Materials Science and Engineering, Northeastern University, Shenyang 110819 (China); Liu, Wei; Zhang, Zhidong [Shenyang National Laboratory for Materials Science, Institute of Metal Research (IMR), Chinese Academy of Sciences (CAS), Shenyang 110016 (China); Wang, Qiang, E-mail: wangq@mail.neu.edu.cn [Key laboratory of electromagnetic processing of materials (EPM), Ministry of Education, Northeastern University, Shenyang 110819 (China)

2017-03-15

A proposed Nd{sub 2}Fe{sub 14}B-core/Nd{sub 2}(Fe, Co){sub 14}B-shell microstructure was realized by diffusion-processing textured Nd{sub 14}Fe{sub 77}B{sub 9} single-layer film with Nd{sub 100−x}Co{sub x} (x=10, 20 and 40) alloys to improve the coercivity thermal stability. The ambient coercivity was increased from around 1 T in single-layer film to nearly 2 T in diffusion-processed films, which was due to the Nd-rich grain boundaries as seen from transmission electron microscopy (TEM) images. The coercivity thermal stability was improved by the core/shell microstructure because Nd-rich grain boundaries provided the high ambient coercivity and Co-rich shell provided the improved coercivity stability. - Highlights: • Core–shell microstructure proposed for enhancing the coercivity thermal stability. • Coercivity enhanced to nearly 2 T by diffusion-processing with Nd–Co alloy. • Good squareness and highly textured microstructure obtained. • Nd-rich phases observed by TEM after diffusion process. • Coercivity thermal stability improved with minor Co addition in grain boundary regions.

Angular dependence of the coercivity in arrays of ferromagnetic nanowires

International Nuclear Information System (INIS)

Holanda, J.; Silva, D.B.O.; Padrón-Hernández, E.

2015-01-01

We present a new magnetic model for polycrystalline nanowires arrays in porous anodic aluminum oxide. The principal consideration here is the crystalline structure and the morphology of the wires and them the dipolar interactions between the crystals into the wire. Other aspect here is the direct calculation of the dipolar energy for the interaction of one wire with the others in the array. The free energy density was formulated for polycrystalline nanowires arrays in order to determinate the anisotropy effective field. It was using the microstructure study by scanning and transmission electron microscopy for the estimation of the real structure of the wires. After the structural analysis we used the angular dependences for the coercivity field and for the remnant magnetization to determine the properties of the wires. All analysis were made by the theory treatment proposed by Stoner and Wohlfarth

Angular dependence of the coercivity in arrays of ferromagnetic nanowires

Energy Technology Data Exchange (ETDEWEB)

Holanda, J. [Departamento de Física, Universidade Federal de Pernambuco, Recife 50670-901, PE (Brazil); Silva, D.B.O. [Pós-Graduação em Ciência de Materiais, Universidade Federal de Pernambuco, Recife 50670-901, PE (Brazil); Padrón-Hernández, E., E-mail: padron@df.ufpe.br [Departamento de Física, Universidade Federal de Pernambuco, Recife 50670-901, PE (Brazil); Pós-Graduação em Ciência de Materiais, Universidade Federal de Pernambuco, Recife 50670-901, PE (Brazil)

2015-03-15

We present a new magnetic model for polycrystalline nanowires arrays in porous anodic aluminum oxide. The principal consideration here is the crystalline structure and the morphology of the wires and them the dipolar interactions between the crystals into the wire. Other aspect here is the direct calculation of the dipolar energy for the interaction of one wire with the others in the array. The free energy density was formulated for polycrystalline nanowires arrays in order to determinate the anisotropy effective field. It was using the microstructure study by scanning and transmission electron microscopy for the estimation of the real structure of the wires. After the structural analysis we used the angular dependences for the coercivity field and for the remnant magnetization to determine the properties of the wires. All analysis were made by the theory treatment proposed by Stoner and Wohlfarth.

EC6 safety design improvements

Energy Technology Data Exchange (ETDEWEB)

Yu, S.; Lee, A.G.; Soulard, M. [Candu Energy Inc., Mississauga, ON (Canada)

2014-07-01

The Enhanced CANDU 6 (EC6) builds on the proven high performance design such as the Qinshan CANDU 6 reactor, and has made improvements to safety, operational performance, and has incorporated extensive operational feedback. Completion of all three phases of the pre-licensing design review by the Canadian Regulator - the Canadian Nuclear Safety Commission has provided a higher level of assurance that the EC6 reference design has taken modern regulatory requirements and expectations into account and further confirmed that there are no fundamental barriers to licensing the EC6 design in Canada. The EC6 design is based on the defence-in-depth principles in INSAG-10 and provides further safety features that address the lessons learned from Fukushima. With these safety features, the EC6 design has strengthened accident prevention as the first priority in the defence-in-depth strategy, as outlined in INSAG-10. As well, the EC6 design has incorporated further mitigation measures to provide additional protection of the public and the environment if the preventive measures fail. The EC6 design has an appropriate combination of inherent, passive safety characteristics, engineered features and administrative safety measures to effectively prevent and mitigate severe accident progressions. A strong contributor to the robustness and redundancy of CANDU design is the two-group separation philosophy. This ensures a high degree of independence between safety systems as well as physical separation and functional independence in how fundamental safety functions are provided. This paper will describe the following safety features based on the application of defence-in-depth and design approach to prevent beyond design basis events progressing to severe accidents and to mitigate the consequences if it occurs: Improved steam generator heat sink via a more reliable emergency heat removal system; Increased time before manual field actions are required via enhanced capacity of

Excess use of coercive measures in psychiatry among migrants compared with native Danes

DEFF Research Database (Denmark)

Nørredam, Marie Louise; Garcia-Lopez, A; Keiding, N

2010-01-01

Norredam M, Garcia-Lopez A, Keiding N, Krasnik A. Excess use of coercive measures in psychiatry among migrants compared with native Danes.Objective: To investigate differences in risk of compulsory admission and other coercive measures in psychiatric emergencies among refugees and immigrants comp...

Relation between Nd2Fe14B grain alignment and coercive force decrease ratio in NdFeB sintered magnets

International Nuclear Information System (INIS)

Matsuura, Yutaka; Hoshijima, Jun; Ishii, Rintaro

2013-01-01

It was found that the coercive force of NdFeB sintered magnets decreases as the Nd 2 Fe 14 B grain alignment improves. Because of this phenomenon, studies looked at the relation between this alignment and the coercive force decrease ratio. In experiments, it was expected that the coercive force of perfectly aligned magnet reached 0.7 of coercive force in istotropically aligned magnet. When it is postulated that the coercive force is determined by the Stoner–Wohlfarth model, coercive force increases as the alignment improves and it becomes difficult to explain our experimental data. On the other hand, when the coercive force is determined by magnetic domain wall motion, the coercive force decreases as the alignment improves and the coercive force of the perfectly aligned magnet reaches 1/√(2) of the isotropically aligned magnet. This tendency and value was very close to our data. It strongly suggests that the coercive force of NdFeB sintered magnets is determined by the domain wall motion. - Highlights: ► Coercive force of NdFeB sintered magnets decreases as grains alignment improves. ► Coercive force decrease ratio reaches −30% at the perfect aligned magnet. ►These experimental results are different from the Stoner–Wohlfarth model. ► The magnetic domain wall motion could explain this coercive force decrease ratio

Coercivity enhancement of hot-deformed Nd-Fe-B magnets by the eutectic grain boundary diffusion process

Energy Technology Data Exchange (ETDEWEB)

Liu, Lihua [Elements Strategy Initiative Center for Magnetic Materials, National Institute of Materials Science, Tsukuba 305-0047 (Japan); Graduate School of Pure and Applied Science, University of Tsukuba, Tsukuba 305-8577 (Japan); Sepehri-Amin, H.; Ohkubo, T. [Elements Strategy Initiative Center for Magnetic Materials, National Institute of Materials Science, Tsukuba 305-0047 (Japan); Yano, M.; Kato, A.; Shoji, T. [Toyota Motor Corporation, Advanced Material Engineering Div., Susono 410-1193 (Japan); Hono, K., E-mail: kazuhiro.hono@nims.go.jp [Elements Strategy Initiative Center for Magnetic Materials, National Institute of Materials Science, Tsukuba 305-0047 (Japan); Graduate School of Pure and Applied Science, University of Tsukuba, Tsukuba 305-8577 (Japan)

2016-05-05

Nd-M (M = Al, Cu, Ga, Zn, Mn) alloys with compositions close to eutectic points were investigated as diffusion sources for the grain boundary diffusion process to hot-deformed Nd-Fe-B magnets. Coercivity enhancement was observed for most of the alloys. Among them, the sample processed with Nd{sub 90}Al{sub 10} exhibited the highest coercivity of 2.5 T at room temperature. However, the sample processed with Nd{sub 70}Cu{sub 30} exhibited the highest coercivity of 0.7 T at 200 {sup °}C. Microstructural observations using scanning transmission electron microscope (STEM) showed that nonferromagnetic Nd-rich intergranular phase envelops the Nd{sub 2}Fe{sub 14}B grains after the diffusion process. Abnormal grain growth and the dissolution of Al into the Nd{sub 2}Fe{sub 14}B grains were observed in the sample processed with Nd{sub 90}Al{sub 10}, which explains its inferior thermal stability of coercivity compared to the sample processed with Nd{sub 70}Cu{sub 30}. The coercivity enhancement and poor thermal stability of the coercivity of the Nd{sub 90}Al{sub 10} diffusion-processed sample are discussed based on microstructure studies by transmission electron microscopy. - Highlights: • Coercivity of hot-deformed Nd-Fe-B magnets is enhanced by the infiltration of various R-TM eutectic alloys. • The sample infiltrated with Nd{sub 90}Al{sub 10} shows the highest coercivity of 2.5 T at room temperature. • At 200 °C, Nd{sub 70}Cu{sub 30} diffusion-processed sample possesses the highest coercivity of 0.7 T.

High-coercivity Nd-Fe-B magnets obtained with the electrophoretic deposition of submicron TbF3 followed by the grain-boundary diffusion process

International Nuclear Information System (INIS)

Soderžnik, Marko; Korent, Matic; Žagar Soderžnik, Kristina; Katter, Matthias; Üstüner, Kaan; Kobe, Spomenka

2016-01-01

Using a grain-boundary diffusion process (GBDP) involving the electrophoretic deposition (EPD) of submicron TbF 3 powder, we substantially increased the coercivity of sintered Nd-Fe-B permanent magnets. The experiments used magnets with low heavy-rare-earth (HRE) content (HRE = 1.2 wt%) and a coercivity of 790 kA/m (at 75 °C). After experiencing optimized conditions at 875 °C for 10 h and subsequent annealing at 500 °C for 1 h, the coercivity was increased to 1536 kA/m (at 75 °C). This value is 1.94 times higher than that for a sintered magnet, without post-sintering heat treatment. Furthermore, a vibration test revealed satisfactory adhesion of the TbF 3 powder to the surface of the magnet with no detected reduction in coercivity. Using field emission gun scanning electron microscopy (FEG-SEM) with an energy dispersive spectroscope (EDS), we confirmed the formation of various secondary intergranular phases and the core-shell-type microstructure, which increases the coercivity. The Tb content in the magnet, exposed to the EPD-based GBDP, was controlled by inductively coupled plasma optical electron spectroscopy (ICP-OES). The additional Tb detected in the magnet due to the described technology was only 0.12 wt%.

Parental Perceptions of the Use of Coercive Measures on Children with Developmental Disabilities

Science.gov (United States)

Saloviita, Timo; Pirttimaa, Raija; Kontu, Elina

2016-01-01

Background: Children with developmental disabilities who exhibit challenging behaviour are potentially subject to the use of coercive interventions. The aim of the study was to investigate the prevalence of the use of coercive measures by authorities, according to parents' reports. Materials and Methods: A postal survey was distributed, as a total…

Iron Oxide Nanoparticles: Tunable Size Synthesis and Analysis in Terms of the Core-Shell Structure and Mixed Coercive Model

Science.gov (United States)

Phong, P. T.; Oanh, V. T. K.; Lam, T. D.; Phuc, N. X.; Tung, L. D.; Thanh, Nguyen T. K.; Manh, D. H.

2017-04-01

Iron oxide nanoparticles (NPs) are currently a very active research field. To date, a comprehensive study of iron oxide NPs is still lacking not only on the size dependence of structural phases but also in the use of an appropriate model. Herein, we report on a systematic study of the structural and magnetic properties of iron oxide NPs prepared by a co-precipitation method followed by hydrothermal treatment. X-ray diffraction and transmission electron microscopy reveal that the NPs have an inverse spinel structure of iron oxide phase (Fe3O4) with average crystallite sizes ( D XRD) of 6-19 nm, while grain sizes ( D TEM) are of 7-23 nm. In addition, the larger the particle size, the closer the experimental lattice constant value is to that of the magnetite structure. Magnetic field-dependent magnetization data and analysis show that the effective anisotropy constants of the Fe3O4 NPs are about five times larger than that of their bulk counterpart. Particle size ( D) dependence of the magnetization and the non-saturating behavior observed in applied fields up to 50 kOe are discussed using the core-shell structure model. We find that with decreasing D, while the calculated thickness of the shell of disordered spins ( t ˜ 0.3 nm) remains almost unchanged, the specific surface areas S a increases significantly, thus reducing the magnetization of the NPs. We also probe the coercivity of the NPs by using the mixed coercive Kneller and Luborsky model. The calculated results indicate that the coercivity rises monotonously with the particle size, and are well matched with the experimental ones.

EC-fans and fan control systems; EC-ventilatoren en ventilatorregelsystemen

Energy Technology Data Exchange (ETDEWEB)

Havenaar, D.

2011-07-15

Saving of energy can be achieved by the design and application of energy efficient components such as EC-fans (EC stands for Electronically Commutated technology), which are used in different types of cooling-refrigeration and air conditioning systems. In this article attention is paid to two products of Ziehl-Abigg: the Icontrol and the Fcontrol frequency converters. [Dutch] Het beperken van het energiegebruik en het verminderen van de uitstoot van het broeikasgas CO2 is voor de sector een belangrijke opgave. Door het ontwerpen en toepassen van energie-efficiente componenten zoals EC-ventilatoren (EC staat voor Electronically Commutated technologie) in allerlei koel-, vries- en luchtbehandelingsinstallaties kan veel bespaard worden in het energiegebruik. In dit artikel wordt aandacht besteed aan 2 producten van Ziehl-Abigg: de Icontrol en de Fcontrol frequentie omvormers.

Coercivity enhancement of Dy-free Nd–Fe–B sintered magnets by intergranular adding Ho{sub 63.4}Fe{sub 36.6} alloy

Energy Technology Data Exchange (ETDEWEB)

Liang, Liping; Ma, Tianyu, E-mail: maty@zju.edu.cn; Wu, Chen; Zhang, Pei; Liu, Xiaolian; Yan, Mi, E-mail: mse_yanmi@zju.edu.cn

2016-01-01

High coercivity Nd–Fe–B sintered magnets serving in high-temperature environments always consume expensive and scarce heavy rare-earth Dy, which has simulated considerable interest to reduce Dy usage. In this work, coercivity of Dy-free magnets was investigated through intergranular adding eutectic Ho{sub 63.4}Fe{sub 36.6} powders. The coercivity increases gradually up to 4 wt% Ho{sub 63.4}Fe{sub 36.6} addition, however the remanence starts to deteriorate drastically as the addition is over 2.5 wt%. Coercivity above 18.0 kOe is obtained at the expense of a slight reduction in remanence through optimizing the addition amount and sintering conditions. The coercivity enhancement is explained through microstructural observations and elemental distribution analysis. (i) (Nd, Ho){sub 2}Fe{sub 14}B shell forms in the outer region of 2:14:1 phase grains, strengthening the local magnetic anisotropy filed, (ii) RE-rich grain boundary phase with low Fe content is thickened, weakening the magnetic coupling between adjacent 2:14:1 phase grains, and (iii) 2:14:1 phase grains are refined upon lowering sintering temperature, reducing the microstructural defects and the stray fields aroused from neighboring grains. - Highlights: • Eutectic Ho{sub 63.4}Fe{sub 36.6} powders were intergranular added to NdFeB sintered magnets. • The doped Dy-free magnet possessed coercivity of 18.0 kOe, remanence of 13.15 kGs. • (Nd, Ho){sub 2}Fe{sub 14}B shell formed in the surface of the matrix grains, increasing the H{sub A}. • Thick grain boundaries with low Fe content formed, decoupling the matrix grains. • By sintered at lower temperature, the matrix phase grains were refined.

EC-construction product guideline 89/106/EEC and EC-pressure equipement guideline 97/23/EC; EG-Bauproduktenrichtlinie 89/106/EWG und EG-Druckgeraeterichtlinie 97/23/EG

Energy Technology Data Exchange (ETDEWEB)

Dupin, F. [DVGW Deutscher Verein des Gas- und Wasserfaches e.V., Bonn (Germany)

1998-08-01

For now nearly ten years the EC-directive 90/396/EEC is well established in the gas field. In the meantime other EC-directives are playing a role which cannot be left out of consideration. Particularly the EC-Construction Product Directive (89/106/EEC) and the Pressure Equipment Directive (97/23/EG) constitute a focal point as many key-issues (e.g. scope) are still open, causing thus hotly debated discussions. The present contribution reflects the current consultations at the national and European level, pointing out then the gas-specific features. (orig.) [Deutsch] Seit nahezu zehn Jahren hat sich die EG-Richtlinie 90/396/EWG fuer Gasverbrauchseinrichtungen im europaeischen Gasfach fest etabliert. Inzwischen sind andere EG-Richtlinien ins Spiel gekommen, deren Einfluss nicht ausser Acht gelassen werden kann. Besonders die EG-Bauproduktenrichtlinie (89/106/EWG) und die EG-Druckgeraeterichtlinie (97/23/EG) stehen z.Z. im Mittelpunkt, da viele Schluesselfragen (z.B. Geltungsbereich) noch offen sind und heftige Debatten mit sich bringen. Der vorliegende Beitrag gibt den Stand der auf nationaler und europaeischer Ebene gefuehrten Beratungen wieder und stellt dabei die gasspezifischen Gegebenheiten heraus. (orig.)

Study of high-coercivity sintered NdFeB magnets

International Nuclear Information System (INIS)

Bai, G.; Gao, R.W.; Sun, Y.; Han, G.B.; Wang, B.

2007-01-01

Magnetic powders for sintered NdFeB magnets have been prepared by using an advanced processing method including strip casting, hydrogen decrepitation, jet milling and rubber isotropic press. The effects of Dy, Ga and Co addition on the microstructure and magnetic properties of sintered magnets have been investigated. By adopting a suitable component ratio and adjusting proper technological parameters, we have prepared high-coercivity sintered NdFeB magnets with hard magnetic properties of j H c =25.6 kOe, B r =13.2 kG and (BH) max =39.9 MGOe. The temperature coefficient of coercivity of the magnets (between 20 and 150 deg. C) is -0.53% deg. C. The magnetic properties at high temperature satisfy the needs of permanent magnet motors

Relation between Nd{sub 2}Fe{sub 14}B grain alignment and coercive force decrease ratio in NdFeB sintered magnets

Energy Technology Data Exchange (ETDEWEB)

Matsuura, Yutaka, E-mail: Yutaka_Matsuura@hitachi-metals.co.jp [Hitachi Metals Ltd., NEOMAX Division, 2-15-17 Egawa, Shimamoto-cho, Mishima-gun, Osaka 618-0013 (Japan); Hoshijima, Jun; Ishii, Rintaro [Hitachi Metals Ltd., NEOMAX Division, 2-15-17 Egawa, Shimamoto-cho, Mishima-gun, Osaka 618-0013 (Japan)

2013-06-15

It was found that the coercive force of NdFeB sintered magnets decreases as the Nd{sub 2}Fe{sub 14}B grain alignment improves. Because of this phenomenon, studies looked at the relation between this alignment and the coercive force decrease ratio. In experiments, it was expected that the coercive force of perfectly aligned magnet reached 0.7 of coercive force in istotropically aligned magnet. When it is postulated that the coercive force is determined by the Stoner–Wohlfarth model, coercive force increases as the alignment improves and it becomes difficult to explain our experimental data. On the other hand, when the coercive force is determined by magnetic domain wall motion, the coercive force decreases as the alignment improves and the coercive force of the perfectly aligned magnet reaches 1/√(2) of the isotropically aligned magnet. This tendency and value was very close to our data. It strongly suggests that the coercive force of NdFeB sintered magnets is determined by the domain wall motion. - Highlights: ► Coercive force of NdFeB sintered magnets decreases as grains alignment improves. ► Coercive force decrease ratio reaches −30% at the perfect aligned magnet. ►These experimental results are different from the Stoner–Wohlfarth model. ► The magnetic domain wall motion could explain this coercive force decrease ratio.

Coercivity of the Nd–Fe–B hot-deformed magnets diffusion-processed with low melting temperature glass forming alloys

Energy Technology Data Exchange (ETDEWEB)

Seelam, U.M.R. [Elements Strategy Initiative Center for Magnetic Materials (ESICMM), National Institute for Materials Science, 1-2-1 Sengen, Tsukuba 305-0047 (Japan); Liu, Lihua [Elements Strategy Initiative Center for Magnetic Materials (ESICMM), National Institute for Materials Science, 1-2-1 Sengen, Tsukuba 305-0047 (Japan); Graduate School of Pure and Applied Sciences, University of Tsukuba, Tsukuba 305-8571 (Japan); Akiya, T.; Sepehri-Amin, H.; Ohkubo, T. [Elements Strategy Initiative Center for Magnetic Materials (ESICMM), National Institute for Materials Science, 1-2-1 Sengen, Tsukuba 305-0047 (Japan); Sakuma, N.; Yano, M.; Kato, A. [Advanced Material Engineering Division, Toyota Motor Corporation, Susono 410-1193 (Japan); Hono, K., E-mail: kazuhiro.hono@nims.go.jp [Elements Strategy Initiative Center for Magnetic Materials (ESICMM), National Institute for Materials Science, 1-2-1 Sengen, Tsukuba 305-0047 (Japan); Graduate School of Pure and Applied Sciences, University of Tsukuba, Tsukuba 305-8571 (Japan)

2016-08-15

Nd- and Pr-based alloys with bulk glass forming ability and low melting temperatures, Nd{sub 60}Al{sub 10}Ni{sub 10}Cu{sub 20} and Pr{sub 60}Al{sub 10}Ni{sub 10}Cu{sub 20}, were used for grain boundary diffusion process to enhance the coercivity of hot-deformed magnets. The coercivity increment was proportional to the weight gain after the diffusion process. For the sample with 64% weight gain, the coercivity increased up to 2.8 T, which is the highest value for bulk Nd–Fe–B magnets that do not contain heavy rare-earth elements, Dy or Tb. Approximately half of the intergranular regions were amorphous and the remaining regions were crystalline. Magnetic isolation of the Nd{sub 2}Fe{sub 14}B grains by the Nd-rich amorphous/crystalline intergranular phases is attributed to the large coercivity enhancement. The coercivity does not change after the crystallization of the intergranular phase, indicating that the coercivity is not influenced by the strain at the interface with the crystalline intergranular phase. - Highlights: • Bulk-glass forming alloys were infiltrated into hot-deformed Nd–Fe–B magnets. • Very high coercivity of 2.8 T was attained without heavy rare-earth elements. • Approximately half of the inter-granular regions were amorphous. • Crystallization of amorphous intergranular phase does not change coercivity.

High magnetic coercivity of FePt-Ag/MgO granular nanolayers

Science.gov (United States)

Roghani, R.; Sebt, S. A.; Khajehnezhad, A.

2018-06-01

L10-FePt ferromagnetic nanoparticles have a hight coercivity of Tesla order. Thus, these nanoparticles, with size of 10 to 15 nm and uniform surface distribution, are suitable in magnetic data storage technology with density of more than 1GB. In order to improve structural and magnetic properties of FePt nanoparticles, some elements and combinations have been added to compound. In this research, we show that due to the presence of the Ag, the phase transition temperature of FePt from fcc to L10-fct phase decreases. The presence of Ag as an additive in FePt-Ag nanocomposite, increases the magnetic coercivity. This nanocomposite, with 10% Ag, was deposited by magnetron sputtering on the MgO heat layer. VSM results of 10 nm nanoparticles show that coercivity has increased up to 1.4 T. XRD and FESEM results confirm that the size of the L10-FePt nanoparticles are 10 nm and their surface distribution are uniform. Ag gradually form nano scale clusters with separate lattice and FePt-Ag nanocomposite appears. The result of this process is emptiness of Ag position in FePt-fcc lattice. So, the mobility of Fe and Pt atoms in this lattice increases and it can be possible for them to move in lower temperature. This mechanism explain the effect of Ag on decreasing the transition temperature to fct-L10 phase, and hight coercivity of FePt nanoparticles.

Effect of magnetic field frequency on coercivity behavior of nanocrystalline Fe79Hf7B12Si2 glass-coated microwires

International Nuclear Information System (INIS)

Garcia, C.; Zhukova, V.; Gonzalez, J.; Blanco, J.M.; Zhukov, A.

2008-01-01

Dependence of coercitivy, H c , on AC magnetic field frequency, f, has been studied in glass coated Fe 79 Hf 7 B 12 Si 2 microwires exhibiting nanocrystalline structure. Annealing of the samples at 450-600 deg. C changes its structure and consequently the magnetic properties (coercivity and magnetostriction constant). The grain size of the nanocrystals increases from about 17 nm up to 35 nm after annealing at 600 deg. C. For the as-prepared microwires the frequency dependence fits well to √(f). In annealed at 550 deg. C samples H c ∼f 2/3 dependence is observed. In terms of the interpretation of the domain wall propagation, both kind of H c (f) dependences can be interpreted considering depinned domain walls, i.e. neglecting elastic coefficient K of the domain wall motion equation. The H c ∼√(f) corresponds better to low frequency limits while H c ∼f 2/3 is attributed to the high frequency behavior

Investigation of energy losses in low-coercivity resin-bonded magnets in alternating magnetic fields

Science.gov (United States)

Milov, E. V.; Sipin, I. A.; Milov, V. N.; Andreenko, A. S.; Balan, I. A.

2017-01-01

Energy losses during alternating remagnetization of low-coercitivity resin-bonded magnets and commercially produced electrical steels were studied experimentally. The studies were conducted on several samples of resin-bonded magnets with different manufacturing technologies and samples of electrical steel sheets of various thicknesses. The static and dynamic magnetic properties of the samples were measured on a vibration magnetometer and a specially designed apparatus, respectively. It was found that the studied samples of bonded magnets have a relatively high level of hysteresis losses associated with high coercivity, which reaches a value of 4-5 Oe. At the same time, the remagnetization losses due to the Foucault currents in the bonded magnets are considerably lower than in electrical steels. The measurement results show that bonded magnets at high frequencies of remagnetization, especially in high-rpm motors, can be competitive in comparison with electrical steels.

Formation and characterization of magnetic barium ferrite hollow fibers with low coercivity via co-electrospun

Energy Technology Data Exchange (ETDEWEB)

Liu, Gui-fang, E-mail: guifang777@163.com; Zhang, Zi-dong, E-mail: 1986zzd@163.com; Dang, Feng, E-mail: dangfeng@sdu.edu.cn; Cheng, Chuan-bing, E-mail: 807033063@qq.com; Hou, Chuan-xin, E-mail: 710313782@qq.com; Liu, Si-da, E-mail: superliustar@hotmail.com

2016-08-15

BaFe{sub 12}O{sub 19} fibers and hollow fibers were successfully prepared by electrospun and co-electrospun. A very interesting result appeared in this study that hollow fibers made by co-electrospun showed low coercivity values of a few hundred oersteds, compared with the coercivity values of more than thousand oersteds for the fibers made by electrospun. So the hollow fibers with high saturation magnetization (M{sub s}) and while comparatively low coercivity (H{sub c}) exhibited strong magnetism and basically showed soft character. And this character for hollow fibers will lead to increase of the permeability for the samples which is favorable for impedance matching in microwave absorption. So these hollow fibers are promised to have use in a number of applications, such as switching and sensing applications, electromagnetic materials, microwave absorber. - Highlights: • BaFe{sub 12}O{sub 19} fibers were prepared via electrospinning successfully. • The coercivity has a value of a few hundred oersteds for the hollow fibers made by coaxial electrospun. • BaFe{sub 12}O{sub 19} with high saturation magnetization and low coercivity shows great potential in microwave absorbing application.

Study of high-coercivity sintered NdFeB magnets

Energy Technology Data Exchange (ETDEWEB)

Bai, G. [School of Physics and Microelectronics, Shandong University, Jinan, 250100 (China); Department of Mathematics and Physics, Xi' an Institute of Technology, Xi' an, 710032 (China); Gao, R.W. [School of Physics and Microelectronics, Shandong University, Jinan, 250100 (China)]. E-mail: gaorwbox@sdu.edu.cn; Sun, Y. [School of Physics and Microelectronics, Shandong University, Jinan, 250100 (China); Han, G.B. [School of Physics and Microelectronics, Shandong University, Jinan, 250100 (China); Wang, B. [School of Physics and Microelectronics, Shandong University, Jinan, 250100 (China); Baotou Rare Earth Research Institute, Batou 014030 (China)

2007-01-15

Magnetic powders for sintered NdFeB magnets have been prepared by using an advanced processing method including strip casting, hydrogen decrepitation, jet milling and rubber isotropic press. The effects of Dy, Ga and Co addition on the microstructure and magnetic properties of sintered magnets have been investigated. By adopting a suitable component ratio and adjusting proper technological parameters, we have prepared high-coercivity sintered NdFeB magnets with hard magnetic properties of {sub j} H {sub c}=25.6 kOe, B {sub r}=13.2 kG and (BH){sub max}=39.9 MGOe. The temperature coefficient of coercivity of the magnets (between 20 and 150 deg. C) is -0.53% deg. C. The magnetic properties at high temperature satisfy the needs of permanent magnet motors.

An H1(Ph)-coercive discontinuous Galerkin formulation for the Poisson problem: 1D analysis

NARCIS (Netherlands)

Zee, van der K.G.; Brummelen, van E.H.; Borst, de R.

2006-01-01

Coercivity of the bilinear form in a continuum variational problem is a fundamental property for finite-element discretizations: By the classical Lax–Milgram theorem, any conforming discretization of a coercive variational problem is stable; i.e., discrete approximations are well-posed and possess

An H1(Ph)-Coercive Discontinuous Galerkin Formulation for The Poisson Problem : 1-D Analysis

NARCIS (Netherlands)

Van der Zee, K.G.; Van Brummelen, E.H.; De Borst, R.

2006-01-01

Coercivity of the bilinear form in a continuum variational problem is a fundamental property for finite-element discretizations: By the classical Lax–Milgram theorem, any conforming discretization of a coercive variational problem is stable; i.e., discrete approximations are well-posed and possess

Remanence coercivity of dot arrays of hcp-CoPt perpendicular films

Energy Technology Data Exchange (ETDEWEB)

Mitsuzuka, K; Shimatsu, T; Aoi, H [Research Institute of Electrical Communication, Tohoku University, Sendai, 980-8577 (Japan); Kikuchi, N; Okamoto, S; Kitakami, O, E-mail: shimatsu@riec.tohoku.ac.j [Institute of Multidisciplinary Research for Advanced Materials, Tohoku University, Sendai, 980-8577 (Japan)

2010-01-01

The remanence coercivity, H{sub r}, of hcp-CoPt dot arrays with various dot thicknesses, {delta}, (3 and 10 nm) and Pt content (20-30at%) were experimentally investigated as a function of the dot diameter, D(30-400 nm). All dot arrays showed a single domain state, even after removal of an applied field equal to H{sub r}. The angular dependence of H{sub r} for the dot arrays indicated coherent rotation of the magnetization during nucleation. H{sub r} increased as Ddecreased in all series of dot arrays with various {delta} and Pt content. Assuming that the nucleation field of a dot is determined by the switching field of a grain having the smallest switching field, we calculated the value of nucleation field H{sub n}{sup cal} taking account of the c-axis distribution and the distribution of the demagnetizing field in the dot. The values of H{sub r} obtained experimentally are in good agreement with those of H{sub n}{sup cal}, taking account of thermal agitation of magnetization. This result suggested that the reversal process of hcp-CoPt dot arrays starts from a nucleation at the center of the dot followed by a propagation process.

Variables Associated with the Use of Coercive Measures on Psychiatric Patients in Spanish Penitentiary Centers

Directory of Open Access Journals (Sweden)

E. Girela

2014-01-01

Full Text Available We have studied the use of coercive medical measures (forced medication, isolation, and mechanical restraint in mentally ill inmates within two secure psychiatric hospitals (SPH and three regular prisons (RP in Spain. Variables related to adopted coercive measures were analyzed, such as type of measure, causes of indication, opinion of patient inmate, opinion of medical staff, and more frequent morbidity. A total of 209 patients (108 from SPH and 101 from RP were studied. Isolation (41.35% was the most frequent coercive measure, followed by mechanical restraint (33.17% and forced medication (25.48%. The type of center has some influence; specifically in RP there is less risk of isolation and restraint than in SPH. Not having had any previous imprisonment reduces isolation and restraint risk while increases the risk of forced medication, as well as previous admissions to psychiatric inpatient units does. Finally, the fact of having lived with a partner before imprisonment reduces the risk of forced medication and communication with the family decreases the risk of isolation. Patients subjected to a coercive measure exhibited a pronounced psychopathology and most of them had been subjected to such measures on previous occasions. The mere fact of external assessment of compliance with human rights slows down the incidence of coercive measures.

Variables associated with the use of coercive measures on psychiatric patients in Spanish penitentiary centers.

Science.gov (United States)

Girela, E; López, A; Ortega, L; De-Juan, J; Ruiz, F; Bosch, J I; Barrios, L F; Luna, J D; Torres-González, F

2014-01-01

We have studied the use of coercive medical measures (forced medication, isolation, and mechanical restraint) in mentally ill inmates within two secure psychiatric hospitals (SPH) and three regular prisons (RP) in Spain. Variables related to adopted coercive measures were analyzed, such as type of measure, causes of indication, opinion of patient inmate, opinion of medical staff, and more frequent morbidity. A total of 209 patients (108 from SPH and 101 from RP) were studied. Isolation (41.35%) was the most frequent coercive measure, followed by mechanical restraint (33.17%) and forced medication (25.48%). The type of center has some influence; specifically in RP there is less risk of isolation and restraint than in SPH. Not having had any previous imprisonment reduces isolation and restraint risk while increases the risk of forced medication, as well as previous admissions to psychiatric inpatient units does. Finally, the fact of having lived with a partner before imprisonment reduces the risk of forced medication and communication with the family decreases the risk of isolation. Patients subjected to a coercive measure exhibited a pronounced psychopathology and most of them had been subjected to such measures on previous occasions. The mere fact of external assessment of compliance with human rights slows down the incidence of coercive measures.

Accelerator-Driven Systems - the iThEC strategy

International Nuclear Information System (INIS)

Revol, Jean-Pierre

2015-01-01

The International Thorium Energy Committee (iThEC) created in Geneva in 2012 is concerned about the energetic future of our society, which is totally organized on the basis of a fossil fuel economy. This has to change because of obvious geopolitical reasons, because of the impact this economy has on the environment, and because of the rather short time on the human time scale, it will take for fossil fuels to run out. One of the main goals of iThEC is to work on reversing the current negative perception of nuclear energy in Europe, which is the main hurdle to a more serious R and D effort in this field. iThEC provides better information to the public on thorium possibilities, supports thorium ADS technology developments, any R and D regarding thorium, and actively engages the scientific, political and business leadership on the subject

Soft magnetic properties of hybrid ferromagnetic films with CoFe, NiFe, and NiFeCuMo layers

Energy Technology Data Exchange (ETDEWEB)

Choi, Jong-Gu [Eastern-western Biomedical Engineering, Sangji University, Wonju 220-702 (Korea, Republic of); Hwang, Do-Guwn [Dept. of Oriental Biomedical Engineering, Sangji University, Wonju 220-702 (Korea, Republic of); Rhee, Jang-Roh [Dept. of Physics, Sookmyung Women' s University, Seoul 140-742 (Korea, Republic of); Lee, Sang-Suk, E-mail: sslee@sangji.ac.kr [Dept. of Oriental Biomedical Engineering, Sangji University, Wonju 220-702 (Korea, Republic of)

2011-09-30

Two-layered ferromagnetic alloy films (NiFe and CoFe) with intermediate NiFeCuMo soft magnetic layers of different thicknesses were investigated to understand the relationship between coercivity and magnetization process by taking into account the strength of hard-axis saturation field. The thickness dependence of H{sub EC} (easy-axis coercivity), H{sub HS} (hard-axis saturation field), and {chi} (susceptibility) of the NiFeCuMo thin films in glass/Ta(5 nm)/[CoFe or NiFe(5 nm-t/2)]/NiFeCuMo(t = 0, 4, 6, 8, 10 nm)/[CoFe or NiFe(5 nm-t/2)]/Ta(5 nm) films prepared using the ion beam deposition method was determined. The magnetic properties (H{sub EC}, H{sub HS}, and {chi}) of the ferromagnetic CoFe, NiFe three-layers with an intermediate NiFeCuMo super-soft magnetic layer were strongly dependent on the thickness of the NiFeCuMo layer.

Effect of Complex Working Conditions on Nurses Who Exert Coercive Measures in Forensic Psychiatric Care.

Science.gov (United States)

Gustafsson, Niclas; Salzmann-Erikson, Martin

2016-09-01

Nurses who exert coercive measures on patients within psychiatric care are emotionally affected. However, research on their working conditions and environment is limited. The purpose of the current study was to describe nurses' experiences and thoughts concerning the exertion of coercive measures in forensic psychiatric care. The investigation was a qualitative interview study using unstructured interviews; data were analyzed with inductive content analysis. Results described participants' thoughts and experiences of coercive measures from four main categories: (a) acting against the patients' will, (b) reasoning about ethical justifications, (c) feelings of compassion, and (d) the need for debriefing. The current study illuminates the working conditions of nurses who exert coercive measures in clinical practice with patients who have a long-term relationship with severe symptomatology. The findings are important to further discuss how nurses and leaders can promote a healthier working environment. [Journal of Psychosocial Nursing and Mental Health Services, 54(9), 37-43.]. Copyright 2016, SLACK Incorporated.

Coercive and legitimate authority impact tax honesty: evidence from behavioral and ERP experiments.

Science.gov (United States)

Gangl, Katharina; Pfabigan, Daniela M; Lamm, Claus; Kirchler, Erich; Hofmann, Eva

2017-07-01

Cooperation in social systems such as tax honesty is of central importance in our modern societies. However, we know little about cognitive and neural processes driving decisions to evade or pay taxes. This study focuses on the impact of perceived tax authority and examines the mental chronometry mirrored in ERP data allowing a deeper understanding about why humans cooperate in tax systems. We experimentally manipulated coercive and legitimate authority and studied its impact on cooperation and underlying cognitive (experiment 1, 2) and neuronal (experiment 2) processes. Experiment 1 showed that in a condition of coercive authority, tax payments are lower, decisions are faster and participants report more rational reasoning and enforced compliance, however, less voluntary cooperation than in a condition of legitimate authority. Experiment 2 confirmed most results, but did not find a difference in payments or self-reported rational reasoning. Moreover, legitimate authority led to heightened cognitive control (expressed by increased MFN amplitudes) and disrupted attention processing (expressed by decreased P300 amplitudes) compared to coercive authority. To conclude, the neuronal data surprisingly revealed that legitimate authority may led to higher decision conflict and thus to higher cognitive demands in tax decisions than coercive authority. © The Author (2017). Published by Oxford University Press.

Proliferation Persuasion. Coercive Bargaining with Nuclear Technology

Energy Technology Data Exchange (ETDEWEB)

Volpe, Tristan A. [George Washington Univ., Washington, DC (United States)

2015-08-31

Why do states wait for prolonged periods of time with the technical capacity to produce nuclear weapons? Only a handful of countries have ever acquired the sensitive nuclear fuel cycle technology needed to produce fissile material for nuclear weapons. Yet the enduring trend over the last five decades is for these states to delay or forgo exercising the nuclear weapons option provided by uranium enrichment or plutonium reprocessing capabilities. I show that states pause at this threshold stage because they use nuclear technology to bargain for concessions from both allies and adversaries. But when does nuclear latency offer bargaining benefits? My central argument is that challengers must surmount a dilemma to make coercive diplomacy work: the more they threaten to proliferate, the harder it becomes to reassure others that compliance will be rewarded with nuclear restraint. I identify a range of mechanisms able to solve this credibility problem, from arms control over breakout capacity to third party mediation and confidence building measures. Since each step towards the bomb raises the costs of implementing these policies, a state hits a sweet spot when it first acquires enrichment and/or reprocessing (ENR) technology. Subsequent increases in proliferation capability generate diminishing returns at the bargaining table for two reasons: the state must go to greater lengths to make a credible nonproliferation promise, and nuclear programs exhibit considerable path dependency as they mature over time. Contrary to the conventional wisdom about power in world politics, less nuclear latency thereby yields more coercive threat advantages. I marshal new primary source evidence from archives and interviews to identify episodes in the historical record when states made clear decisions to use ENR technology as a bargaining chip, and employ this theory of proliferation persuasion to explain how Japan, North Korea, and Iran succeeded and failed to barter concessions from the

Large coercivity in nanocrystalline TbMn6Sn6 permanent magnets prepared by mechanical milling

International Nuclear Information System (INIS)

Zhang Hongwei; Zhao Tongyun; Zhang Jian; Rong Chuanbing; Zhang Shaoying; Shen Baogen; Li Lu; Zhang Ligang

2003-01-01

Isotropic TbMn 6 Sn 6 was prepared by mechanical milling and subsequent annealing. Although the crystalline grain size was a little larger than 15 nm, no remanence enhancement resulting from intergrain exchange coupling was observed. The coercivity μ 0 H c = 0.96 T at 293 K was much larger than that expected from magnetocrystalline anisotropy. The smallest effective anisotropy constant is suggested to be 0.25 MJ m -3 when the coercivity mechanism is controlled by coherent rotation of magnetization in a single-domain grain. The contributions of shape anisotropy and magnetoelastic anisotropy are considered in order to explain the large coercivity in the magnets

Structure, coercive control, and autonomy promotion: A comparison of fathers' and mothers' food parenting strategies.

Science.gov (United States)

Pratt, Mercedes; Hoffmann, Debra; Taylor, Maija; Musher-Eizenman, Dara

2017-05-01

This study explored differences in mothers' and fathers' food parenting strategies, specifically coercive control, structure, and autonomy promotion, and whether parenting style and parental responsibility for food parenting related to the use of these strategies. Parents of children aged 2.5-7.5 years ( N = 497) reported about their parenting practices and food parenting strategies. Parenting style accounted for the majority of the variance in food parenting. Fathers were more authoritarian than mothers. Authoritarian and permissive parenting practices were related to more coercive strategies. Mothers reported more food parenting responsibility. Responsibility was related to less coercive practices and more autonomy promotion and structure.

Effect of Coercive Voltage and Charge Injection on Performance of a Ferroelectric-Gate Thin-Film Transistor

Directory of Open Access Journals (Sweden)

P. T. Tue

2013-01-01

Full Text Available We adopted a lanthanum oxide capping layer between semiconducting channel and insulator layers for fabrication of a ferroelectric-gate thin-film transistor memory (FGT which uses solution-processed indium-tin-oxide (ITO and lead-zirconium-titanate (PZT film as a channel layer and a gate insulator, respectively. Good transistor characteristics such as a high “on/off” current ratio, high channel mobility, and a large memory window of 108, 15.0 cm2 V−1 s−1, and 3.5 V were obtained, respectively. Further, a correlation between effective coercive voltage, charge injection effect, and FGT’s memory window was investigated. It is found that the charge injection from the channel to the insulator layer, which occurs at a high electric field, dramatically influences the memory window. The memory window’s enhancement can be explained by a dual effect of the capping layer: (1 a reduction of the charge injection and (2 an increase of effective coercive voltage dropped on the insulator.

A new verification film system for routine quality control of radiation fields: Kodak EC-L.

Science.gov (United States)

Hermann, A; Bratengeier, K; Priske, A; Flentje, M

2000-06-01

The use of modern irradiation techniques requires better verification films for determining set-up deviations and patient movements during the course of radiation treatment. This is an investigation of the image quality and time requirement of a new verification film system compared to a conventional portal film system. For conventional verifications we used Agfa Curix HT 1000 films which were compared to the new Kodak EC-L film system. 344 Agfa Curix HT 1000 and 381 Kodak EC-L portal films of different tumor sites (prostate, rectum, head and neck) were visually judged on a light box by 2 experienced physicians. Subjective judgement of image quality, masking of films and time requirement were checked. In this investigation 68% of 175 Kodak EC-L ap/pa-films were judged "good", only 18% were classified "moderate" or "poor" 14%, but only 22% of 173 conventional ap/pa verification films (Agfa Curix HT 1000) were judged to be "good". The image quality, detail perception and time required for film inspection of the new Kodak EC-L film system was significantly improved when compared with standard portal films. They could be read more accurately and the detection of set-up deviation was facilitated.

Micromagnetic simulation and the angular dependence of coercivity and remanence for array of polycrystalline nickel nanowires

Energy Technology Data Exchange (ETDEWEB)

Fuentes, G.P.; Holanda, J. [Departamento de Física, Universidade Federal de Pernambuco, Recife, PE 50670-901 (Brazil); Guerra, Y.; Silva, D.B.O.; Farias, B.V.M. [Pós-Graduação em Ciência de Materiais, Universidade Federal de Pernambuco, Recife, PE 50670-901 (Brazil); Padrón-Hernández, E., E-mail: padron@df.ufpe.br [Departamento de Física, Universidade Federal de Pernambuco, Recife, PE 50670-901 (Brazil); Pós-Graduação em Ciência de Materiais, Universidade Federal de Pernambuco, Recife, PE 50670-901 (Brazil)

2017-02-01

We present here our experimental results for the preparation and characterization of nanowires of nickel and the analysis of the angular dependence of coercivity and remanence using experimental data and micromagnetic simulation. The fabrication was made by using aluminum oxide membranes as templates and deposited nickel by an electrochemical route. The magnetic measurements showed that coercivity and remanence are dependent of the angle of application of the external magnetic field. Our results are different than that expected for the coherent, vortex and transversal modes of the reversion for the magnetic moments. According to the transmission electron microscopy analysis we can see that our nanowires have not a perfect cylindrical format. That is why we have used the ellipsoids chain model for better understanding the real structure of wires and its relation with the magnetic behavior. In order to generate theoretical results for this configuration we have made micromagnetic simulation using Nmag code. Our numerical results for the realistic distances are in correspondence with the magnetic measurements and we can see that there are contradictions if we assume the transverse reversal mode. Then, we can conclude that structure of nanowires should be taken into account to understand the discrepancies reported in the literature for the reversion mechanism in arrays of nickel nanowires. - Highlights: • We present answers for the problem of angular dependence for the coercivity and remanence. • Experimental and theoretical results confirmed the great importance of the real structure. • Micromagnetic calculations confirmed the importance of the real structure.

Rapid procedure to calibrate EC-10 and EC-20 capacitance sensors ...

African Journals Online (AJOL)

A rapid calibration procedure for EC-10 and EC-20 sensors is introduced to promote the commercial use of these sensors for hydroponic irrigation management in coir. The method is comprised of taking one sensor reading, by a sensor installed under hydroponic crop production conditions, and one gravimetric sample, ...

Relationships Between Shame, Restrictiveness, Authoritativeness, and Coercive Control in Men Mandated to a Domestic Violence Offenders Program.

Science.gov (United States)

Kaplenko, Hannah; Loveland, Jennifer E; Raghavan, Chitra

2018-04-01

Coercive control, a key element of intimate partner violence (IPV), is defined as an abuse dynamic that intends to strip the target of autonomy and liberty. While coercive control is gaining popularity in the research world, little is known about its correlates and causes. This study sought to examine how shame and men's need for dominance, measured by two trait indexes of dominance, restrictiveness and the need for authority, influence coercive control. The present study used a diverse sample of men (n = 134) who were mandated to attend a domestic violence offenders program. Findings suggest that shame plays a role in the commission of coercively controlling behavior both directly and partially through its influence on authority but not through restrictiveness. Implications for understanding IPV in a domestic violence offenders program are discussed.

Determination of primary combustion source organic carbon-to-elemental carbon (OC / EC ratio using ambient OC and EC measurements: secondary OC-EC correlation minimization method

Directory of Open Access Journals (Sweden)

C. Wu

2016-05-01

Full Text Available Elemental carbon (EC has been widely used as a tracer to track the portion of co-emitted primary organic carbon (OC and, by extension, to estimate secondary OC (SOC from ambient observations of EC and OC. Key to this EC tracer method is to determine an appropriate OC / EC ratio that represents primary combustion emission sources (i.e., (OC / ECpri at the observation site. The conventional approaches include regressing OC against EC within a fixed percentile of the lowest (OC / EC ratio data (usually 5–20 % or relying on a subset of sampling days with low photochemical activity and dominated by local emissions. The drawback of these approaches is rooted in its empirical nature, i.e., a lack of clear quantitative criteria in the selection of data subsets for the (OC / ECpri determination. We examine here a method that derives (OC / ECpri through calculating a hypothetical set of (OC / ECpri and SOC followed by seeking the minimum of the coefficient of correlation (R2 between SOC and EC. The hypothetical (OC / ECpri that generates the minimum R2(SOC,EC then represents the actual (OC / ECpri ratio if variations of EC and SOC are independent and (OC / ECpri is relatively constant in the study period. This Minimum R Squared (MRS method has a clear quantitative criterion for the (OC / ECpri calculation. This work uses numerically simulated data to evaluate the accuracy of SOC estimation by the MRS method and to compare with two commonly used methods: minimum OC / EC (OC / ECmin and OC / EC percentile (OC / EC10 %. Log-normally distributed EC and OC concentrations with known proportion of SOC are numerically produced through a pseudorandom number generator. Three scenarios are considered, including a single primary source, two independent primary sources, and two correlated primary sources. The MRS method consistently yields the most accurate SOC estimation. Unbiased SOC estimation by OC�

Higher Education Policy in Australia: Corporate or Coercive Federalism?

Science.gov (United States)

Smart, Don

1991-01-01

Although the Hawke government's general strategy of corporate federalism may dominate educational policy in Australia, higher education (excluding teacher education) is an exception. Because the Commonwealth assumed full financial responsibility for higher education, it has increasingly employed coercive federalism or simply ignored the states.…

Empowerment, Coercive Persuasion and Organizational Learning: Do They Connect?

Science.gov (United States)

Schein, Edgar H.

1999-01-01

Individual learning in organizations can be de facto coercive persuasion when organizational learning and culture change require that learners develop appropriate attitudes and thinking. If the goal of organizational learning--innovative organizations--is accepted, moral choices that restrict individual freedom must be made. (SK)

Giant magnetic coercivity in YNi{sub 4}B-type SmNi{sub 3}TB (T=Mn–Cu) solid solutions

Energy Technology Data Exchange (ETDEWEB)

Yao, Jinlei; Yan, Chang [Research Center for Solid State Physics and Materials, School of Mathematics and Physics, Suzhou University of Science and Technology, Suzhou 215009 (China); Yapaskurt, V.O. [Department of Petrology, Geological Faculty Moscow State University, Leninskie Gory, Moscow 119992 (Russian Federation); Morozkin, A.V., E-mail: morozkin@tech.chem.msu.ru [Department of Chemistry, Moscow State University, Leninskie Gory, House 1, Building 3, GSP-2, Moscow 119992 (Russian Federation)

2016-12-01

The effects of transition metal substitution for Ni on the magnetic properties of the YNi{sub 4}B-type SmNi{sub 4}B via SmNi{sub 3}TB (T=Mn, Fe, Co, Cu) solid solutions have been investigated. SmNi{sub 4}B, SmNi{sub 3}MnB, SmNi{sub 3}FeB, SmNi{sub 3}CoB and SmNi{sub 3}CuB show ferromagnetic ordering at 40 K, 210 K, 322 K, 90 K and 57 K and field sensitive metamagnetic-like transitions at 15 K, 100 K, 185 K, 55 K and 15 K in a magnetic field of 10 kOe, respectively. The magnetocaloric effects of SmNi{sub 3}TB (T=Mn–Cu) were calculated in terms of isothermal magnetic entropy change (ΔS{sub m}). The magnetic entropy ΔS{sub m} reaches value of –0.94 J/kg K at 40 K for SmNi{sub 4}B, –1.5 J/kg K at 205 K for SmNi{sub 3}MnB, –0.54 J/kg K at 320 K for SmNi{sub 3}FeB, –0.49 J/kg K at 90 K for SmNi{sub 3}CoB and –0.54 J/kg K at 60 K for SmNi{sub 3}CuB in field change of 0–50 kOe around the Curie temperature. They show positive ΔS{sub m} of +0.71 J/kg K at ~10 K for SmNi{sub 4}B, +1.69 J/kg K at 30 K for SmNi{sub 3}MnB, +0.89 J/kg K at 110 K for SmNi{sub 3}FeB, +1.08 J/kg K at 25 K for SmNi{sub 3}CoB and +1.12 J/kg K at 10 K for SmNi{sub 3}CuB in field change of 0–50 kOe around the low temperature metamagnetic-like transition. Below the field induced transition temperature (change of magnetic structure), SmNi{sub 3}TB (T=Mn–Cu) exhibits giant magnetic coercivity of 74 kOe at 5 K for SmNi{sub 4}B, 69 kOe at 20 K (90 kOe at 10 K) for SmNi{sub 3}MnB, 77 kOe at 60 K for SmNi{sub 3}FeB, 88 kOe at 20 K for SmNi{sub 3}CoB and 52 kOe at 5 K for SmNi{sub 3}CuB. - Highlights: • YNi{sub 4}B-type SmNi{sub 3}{Mn, Fe, Co, Ni, Cu}B exhibit the Curie points at 39–322 K. • SmNi{sub 3}{Mn, Fe, Co, Ni, Cu}B show field induced transition at 15–185 K. • SmNi{sub 3}MnB shows huge magnetic hysteresis with coercive field of 69 kOe at 20 K. • SmNi{sub 3}FeB shows huge magnetic hysteresis with coercive field of 77 kOe at 60 K. • SmNi{sub 3}CoB shows giant coercive

A 0.5 Tesla Transverse-Field Alternating Magnetic Field Demagnetizer

Science.gov (United States)

Schillinger, W. E.; Morris, E. R.; Finn, D. R.; Coe, R. S.

2015-12-01

We have built an alternating field demagnetizer that can routinely achieve a maximum field of 0.5 Tesla. It uses an amorphous magnetic core with an air-cooled coil. We have started with a 0.5 T design, which satisfies most of our immediate needs, but we can certainly achieve higher fields. In our design, the magnetic field is transverse to the bore and uniform to 1% over a standard (25 mm) paleomagnetic sample. It is powered by a 1 kW power amplifier and is compatible with our existing sample handler for automated demagnetization and measurement (Morris et al., 2009). It's much higher peak field has enabled us to completely demagnetize many of the samples that previously we could not with commercial equipment. This capability is especially needed for high-coercivity sedimentary and igneous rocks that contain magnetic minerals that alter during thermal demagnetization. It will also enable detailed automated demagnetization of high coercivity phases in extraterrestrial samples, such as native iron, iron-alloy and sulfide minerals that are common in lunar rocks and meteorites. Furthermore, it has opened the door for us to use the rock-magnetic technique of component analysis, using coercivity distributions derived from very detailed AF demagnetization of NRM and remanence produced in the laboratory to characterize the magnetic mineralogy of sedimentary rocks. In addition to the many benefits this instrument has brought to our own research, a much broader potential impact is to replace the transverse coils in automated AF demagnetization systems, which typically are limited to peak fields around 0.1 T.

A new verification film system for routine quality control of radiation fields: Kodak EC-L

International Nuclear Information System (INIS)

Hermann, A.; Bratengeier, K.; Priske, A.; Flentje, M.

2000-01-01

Background: The use of modern irradiation techniques requires better verification films for determining set-up deviations and patient movements during the course of radiation treatment. This is an investigation of the image quality and time requirement of a new verification film system compared to a conventional portal film system. Material and Methods: For conventional verifications we used Agfa Curix HT 1000 films which were compared to the new Kodak EC-L film system. 344 Agfa Curix HT 1000 and 381 Kodak EC-L portal films of different tumor sites (prostate, rectum, head and neck) were visually judged on a light box by 2 experienced physicians. Subjective judgement of image quality, masking of films and time requirement were checked. Results: In this investigation 68% of 175 Kodak EC-L ap/pa-films were judged 'good', only 18% were classified 'moderate' or 'poor' 14%, but only 22% of 173 conventional ap/pa verification films (Agfa Curix HT 1000) were judged to be 'good'. Conclusions: The image quality, detail perception and time required for film inspection of the new Kodak EC-L film system was significantly improved when compared with standard portal films. They could be read more accurately and the detection of set-up deviation was facilitated. (orig.) [de

High-coercivity FePt nanoparticle assemblies embedded in silica thin films

International Nuclear Information System (INIS)

Yan, Q; Purkayastha, A; Singh, A P; Li, H; Ramanath, G; Li, A; Ramanujan, R V

2009-01-01

The ability to process assemblies using thin film techniques in a scalable fashion would be a key to transmuting the assemblies into manufacturable devices. Here, we embed FePt nanoparticle assemblies into a silica thin film by sol-gel processing. Annealing the thin film composite at 650 deg. C transforms the chemically disordered fcc FePt phase into the fct phase, yielding magnetic coercivity values H c >630 mT. The positional order of the particles is retained due to the protection offered by the silica host. Such films with assemblies of high-coercivity magnetic particles are attractive for realizing new types of ultra-high-density data storage devices and magneto-composites.

Tuning coercive force by adjusting electric potential in solution processed Co/Pt(111) and the mechanism involved

Science.gov (United States)

Chang, Cheng-Hsun-Tony; Kuo, Wei-Hsu; Chang, Yu-Chieh; Tsay, Jyh-Shen; Yau, Shueh-Lin

2017-03-01

A combination of a solution process and the control of the electric potential for magnetism represents a new approach to operating spintronic devices with a highly controlled efficiency and lower power consumption with reduced production cost. As a paradigmatic example, we investigated Co/Pt(111) in the Bloch-wall regime. The depression in coercive force was detected by applying a negative electric potential in an electrolytic solution. The reversible control of coercive force by varying the electric potential within few hundred millivolts is demonstrated. By changing the electric potential in ferromagnetic layers with smaller thicknesses, the efficiency for controlling the tunable coercive force becomes higher. Assuming that the pinning domains are independent of the applied electric potential, an electric potential tuning-magnetic anisotropy energy model was derived and provided insights into our knowledge of the relation between the electric potential tuning coercive force and the thickness of the ferromagnetic layer. Based on the fact that the coercive force can be tuned by changing the electric potential using a solution process, we developed a novel concept of electric-potential-tuned magnetic recording, resulting in a stable recording media with a high degree of writing ability.

Structural, magnetic characterization (dependencies of coercivity and loss with the frequency) of magnetic cores based in Finemet

Science.gov (United States)

Osinalde, M.; Infante, P.; Domínguez, L.; Blanco, J. M.; del Val, J. J.; Chizhik, A.; González, J.

2017-12-01

We report changes of coercivity, induced magnetic anisotropy, magneto-optical domain structure and frequency dependencies of coercivity and energy loss (up to 10 MHz) associated with the structural modifications produced by thermal treatments under applied magnetic field (field annealing) in toroidal wound cores of Fe73.5Cu1Nb3Si15.5B7 amorphous alloy. The thermal treatment (535 °C, 1 h) leads to the typical nanocrystalline structure of α-Fe(Si) nanograins (60-65% relative volume, 10-20 nm average grain size embedded in a residual amorphous matrix, while the magnetic field with the possibility to be applied in two directions to the toroidal core axis, that is in transverse (which is equivalent to the transverse direction of the ribbon) or longitudinal (equivalent to the longitudinal direction of the ribbon), develops a macroscopic uniaxial magnetic anisotropy in the transverse (around 245 J/m3) or longitudinal (around 85 J/m3) direction of the ribbon, respectively. It is remarkable the quasi-unhysteretic character of the cores with these two kinds of field annealing as comparing with that of the as-quenched one. Magneto-optical study by Kerr-effect of the ribbons provides useful information on the domain structure of the surface in agreement with the direction and intensity of the induced magnetic anisotropy. This induced uniaxial magnetic anisotropy plays a very important role on the Hc(f) and EL(f) curves, (f: frequency), being drastic the presence and direction of the induced magnetic anisotropy. In addition, these frequency dependencies show a significant change at the frequency around 100 Hz.

Magnetization reversal and coercivity of Fe3Se4 nanowire arrays

Science.gov (United States)

Li, D.; Li, S. J.; Zhou, Y. T.; Bai, Y.; Zhu, Y. L.; Ren, W. J.; Long, G.; Zeng, H.; Zhang, Z. D.

2015-05-01

The microstructure and magnetic properties of Fe3Se4 nanowire (NW) arrays in anodic aluminum oxide (AAO) porous membrane are studied. Cross-sectional SEM and plane-view TEM images show that the mean wire diameter (dw) and the center-to-center spacing (D) of Fe3Se4 nanowires are about 220 nm and 330 nm, respectively. The field-cooled magnetization dependent on the temperature indicates a Curie temperature around 334 K for the Fe3Se4 nanowires. The coercivities of Fe3Se4 nanowires at 10 K, obtained from the in-plane and out-of-plane hysteresis loops, are as high as 22.4 kOe and 23.3 kOe, which can be understood from the magnetocrystalline anisotropy and the magnetization reversal process.

High coercivity rare earth-transition metal magnets

International Nuclear Information System (INIS)

Croat, J.J.

1982-01-01

Ferromagnetic compositions having intrinsic magnetic coercivities at room temperature of at least 1,000 Oersteds are formed by the controlled quenching of molten rare earth-transition metal alloys. Hard magnets may be inexpensively formed from the lower atomic weight lanthanide elements and iron. The preferable compositions lie within: at least one of Fe, Ni, Co; 20 - 70 atomic percent: at least one of Ce, Pr, Nd, Sm, Eu, Tb, Dy, Ho, Er, Tm, Y; 80 - 30 atomic percent. (author)

Ultrahigh coercivity and core-shell microstructure achieved in oriented Nd-Fe-B thin films diffusion-processed with Dy-based alloys

Energy Technology Data Exchange (ETDEWEB)

Zhang, Tongbo; Zhou, Xiaoqian; Yu, Dedong; Fu, Yanqing; Cui, Weibin [Northeastern University, Key Laboratory of Electromagnetic Processing of Materials (EPM), Ministry of Education, Shenyang (China); Northeastern University, Department of Physics and Chemistry of Materials, School of Materials Science and Engineering, Shenyang (China); Li, Guojian; Wang, Qiang [Northeastern University, Key Laboratory of Electromagnetic Processing of Materials (EPM), Ministry of Education, Shenyang (China)

2017-01-15

Ultrahigh ambient coercivities of ∝4 T were achieved in Nd-Fe-B benchmark thin film with coercivity of 1.06 T by diffusion-processing with Dy, Dy{sub 70}Cu{sub 30} and Dy{sub 80}Ag{sub 20} alloy layer. High texture and good squareness were obtained. In triple-junction regions, Dy element was found to be immiscible with Nd element. Microstructure observation indicated the typical gradient elementary distribution. Unambiguous core/shell microstructure was characterized by transition electron microscopy. Due to the enhanced ambient coercivity, the coercivity temperature stability was also substantially increased. (orig.)

Coercivities of hot-deformed magnets processed from amorphous and nanocrystalline precursors

International Nuclear Information System (INIS)

Tang, Xin; Sepehri-Amin, H.; Ohkubo, T.; Hioki, K.; Hattori, A.; Hono, K.

2017-01-01

Hot-deformed magnets have been processed from amorphous and nanocrystalline precursors and their hard magnetic properties and microstructures have been investigated in order to explore the optimum process route. The hot-deformed magnets processed from an amorphous precursor exhibited the coercivity of 1.40 T that is higher than that processed from nanocrystalline powder, ∼1.28 T. The average grain size was larger in the magnets processed from amorphous precursor. Detailed microstructure analyses by aberration corrected scanning transmission electron microscopy revealed that the Nd + Pr concentrations in the intergranular phases were higher in the hot-deformed magnet processed from the amorphous precursor, which is considered to lead to the enhanced coercivity due to a stronger pinning force against magnetic domain wall motion.

Investigation of cellular microstructure and enhanced coercivity in sputtered Sm2(CoCuFeZr)17 film

International Nuclear Information System (INIS)

Bhatt, Ranu; Schütz, G.; Bhatt, Pramod

2014-01-01

We have investigated the effect of annealing temperature on the microstructure and magnetic properties of Sm 2 (CoCuFeZr) 17 films prepared using ion beam sputtering at room temperature. The as-deposited film shows randomly oriented polycrystalline grains and exhibits small coercivity (H C ) of 0.04 T at room temperature. Post annealing of these films at 700 °C under Ar atmosphere shows significant changes in the microstructure transforming it to the development of cellular growth, concomitant with enhanced coercivity up to 1.3 T. The enhanced coercivity is explained using the domain wall pinning mechanism

Tuning microstructure and magnetic properties of electrodeposited CoNiP films by high magnetic field annealing

Energy Technology Data Exchange (ETDEWEB)

Wu, Chun; Wang, Kai [Key Laboratory of Electromagnetic Processing of Materials (Ministry of Education), Northeastern University, Shenyang 110819 (China); Li, Donggang, E-mail: lidonggang@smm.neu.edu.cn [School of Metallurgy, Northeastern University, Shenyang 110819 (China); Lou, Changsheng [School of Materials Science and Engineering, Shenyang Ligong University, Shenyang 110159 (China); Zhao, Yue; Gao, Yang [Key Laboratory of Electromagnetic Processing of Materials (Ministry of Education), Northeastern University, Shenyang 110819 (China); Wang, Qiang, E-mail: wangq@mail.neu.edu.cn [Key Laboratory of Electromagnetic Processing of Materials (Ministry of Education), Northeastern University, Shenyang 110819 (China)

2016-10-15

A high magnetic field (up to 12 T) has been used to anneal 2.6-µm-thick Co{sub 50}Ni{sub 40}P{sub 10} films formed by pulse electrodeposition. The effects of high magnetic field annealing on the microstructure and magnetic properties of CoNiP thin films have been investigated. It was found that a high magnetic field accelerated a phase transformation from fcc to hcp and enhanced the preferred hcp-(002) orientation during annealing. Compared with the films annealed without a magnetic field, annealing at 12 T decreased the surface particle size, roughness, and coercivity, but increased the saturation magnetization and remanent magnetization of CoNiP films. The out-of-plane coercivity was higher than that the in-plane for the as-deposited films. After annealing without a magnetic field, the out-of-plane coercivity was equal to that of the in-plane. However, the out-of-plane coercivity was higher than that of the in-plane when annealing at 12 T. These results indicate that high magnetic field annealing is an effective method for tuning the microstructure and magnetic properties of thin films. - Highlights: • High magnetic field annealing accelerated phase transformation from γ to ε. • High magnetic field annealing enhanced preferred hcp-(002) orientation. • High magnetic field annealing decreased particle size, roughness and coercivity. • High magnetic field annealing increased the saturation and remanent magnetization.

Perspectives for high-performance permanent magnets: applications, coercivity, and new materials

Science.gov (United States)

Hirosawa, Satoshi; Nishino, Masamichi; Miyashita, Seiji

2017-03-01

High-performance permanent magnets are indispensable in the production of high-efficiency motors and generators and ultimately for sustaining the green earth. The central issue of modern permanent magnetism is to realize high coercivity near and above room temperature on marginally hard magnetic materials without relying upon the critical elements such as heavy rare earths by means of nanostructure engineering. Recent investigations based on advanced nanostructure analysis and large-scale first principles calculations have led to significant paradigm shifts in the understandings of coercivity mechanism in Nd-Fe-B permanent magnets, which includes the discovery of the ferromagnetism of the thin (2 nm) intergranular phase surrounding the Nd2Fe14B grains, the occurrence of negative (in-plane) magnetocrystalline anisotropy of Nd ions and some Fe atoms at the interface which degrades coercivity, and visualization of the stochastic behaviors of magnetization in the magnetization reversal process at high temperatures. A major change may occur also in the motor topologies, which is currently overwhelmed by the magnetic flux weakening interior permanent magnet motor type, to other types with variable flux permanent magnet type in some applications to open up a niche for new permanent magnet materials. Keynote talk at 8th International Workshop on Advanced Materials Science and Nanotechnology (IWAMSN2016), 8-12 November 2016, Ha Long City, Vietnam.

Microstructure evolution and coercivity enhancement in Nd-Fe-B thin films diffusion-processed by R-Al alloys (R=Nd, Pr)

Science.gov (United States)

Xie, Yigao; Yang, Yang; Zhang, Tongbo; Fu, Yanqing; Jiang, Qingzheng; Ma, Shengcan; Zhong, Zhenchen; Cui, Weibin; Wang, Qiang

2018-05-01

Diffusion process by Nd-Al and Pr-Al alloys was compared and investigated in Nd-Fe-B thin films. Enhanced coercivity 2.06T and good squareness was obtained by using Pr85Al15 and Nd85Al15 alloys as diffusion sources. But the coercivity of diffusion-processed thin films by Pr70Al30 and Pr55Al45 alloys decreased to 2.04T and 1.82T. High ambient coercivity of 2.26T was achieved in diffusion-processed thin film by Nd70Al30 leading to an improved coercivity thermal stability because Nd2Fe14B grains were enveloped by Nd-rich phase as seen by transmission electron microscopy Nd-loss image. Meanwhile, microstructure-dependent parameters α and Neff were improved. However, high content of Al in diffusion-processed thin film by Nd55Al45 lead to degraded texture and coercivity.

High coercivity rare earth-transition metal magnets

International Nuclear Information System (INIS)

Croat, J.J.

1982-01-01

Ferromagnetic compositions having intrinsic magnetic coercivities at room temperature of at least 1,000 Oersteds are formed by the controlled quenching of molten rare earth -transition metal alloys. Hard magnets may be inexpensively formed from the lower atomic weight lanthanide elements and iron. The preferable compositions lie within: at least one of Fe, Ni, Co (20 to 70 atomic percent); and at least one of Ce, Pr, Na, Sm, Eu, Tb, Dy, Ho, Er, Tm, Y (80 to 30 atomic percent). (author)

Thickness dependence of the switching voltage in all-oxide ferroelectric thin-film capacitors prepared by pulsed laser deposition

NARCIS (Netherlands)

Cillessen, J.F.M.; Prins, M.W.J.; Wolf, R.M.

1997-01-01

Thin-film ferroelectric capacitors consisting of PbZr0.53Ti0.47O3 sandwiched between La0.5Sr0.5CoO3 electrodes have been deposited using pulsed laser deposition. The combination of oxidic perovskite-type materials results in capacitors with a coercive field (Ec) which is comparable with values for

High coercivity Gd-substituted Ba hexaferrites, prepared by chemical coprecipitation

Science.gov (United States)

Litsardakis, G.; Manolakis, I.; Serletis, C.; Efthimiadis, K. G.

2008-04-01

A series of Gd-substituted Ba hexaferrites with nominal formula (Ba1-xGdx)Oṡ5.25 Fe2O3 (x=0-0.30) were prepared by the chemical coprecipitation method from nitrate precursors and heating at T =800-1200°C for 2h. The samples have been examined by x-ray diffraction, vibrating-sample magnetometer, and scanning electron microscopy methods. Gd substituted samples form single phase materials with the M-type hexaferrite structure at all heating temperatures, in the range of x ⩽0.10-0.20. The saturation magnetization (at 1.8T) varies slightly with x in most cases and, for x =0.05-0.10, it increases up to 66.7Am2/kg, exceeding the value of the unsubstituted hexaferrite. A strong enhancement of the coercivity is observed for all substituted samples, with maximum values Hc=457kA/m for the single-phase x =0.10 sample annealed at 1000°C and Hc=477kA/m for the x =0.25 sample annealed at 1100°C which contains Fe2O3 and GdFeO3 impurities. As the variation of coercivity with either substitution rate (x ) or annealing temperature is not monotonic, three different factors may account for the high coercivities that are obtained: (a) an inhibition of grain growth due to the presence of Gd, (b) a possible inherent effect on magnetocrystalline anisotropy, especially for single phase samples, and (c) a microstructural effect of secondary phases.

Coercivity and nanostructure of melt-spun Ti-Fe-Co-B-based alloys

Directory of Open Access Journals (Sweden)

W. Y. Zhang

2016-05-01

Full Text Available Nanocrystalline Ti-Fe-Co-B-based alloys, prepared by melt spinning and subsequent annealing, have been characterized structurally and magnetically. X-ray diffraction and thermomagnetic measurements show that the ribbons consist of tetragonal Ti3(Fe,Co5B2, FeCo-rich bcc, and NiAl-rich L21 phases; Ti3(Fe,Co5B2, is a new substitutional alloy series whose end members Ti3Co5B2 and Ti3Fe5B2 have never been investigated magnetically and may not even exist, respectively. Two compositions are considered, namely Ti11+xFe37.5-0.5xCo37.5−0.5xB14 (x = 0, 4 and alnico-like Ti11Fe26Co26Ni10Al11Cu2B14, the latter also containing an L21-type alloy. The volume fraction of the Ti3(Fe,Co5B2 phase increases with x, which leads to a coercivity increase from 221 Oe for x = 0 to 452 Oe for x = 4. Since the grains are nearly equiaxed, there is little or no shape anisotropy, and the coercivity is largely due to the magnetocrystalline anisotropy of the tetragonal Ti3(Fe,Co5B2 phase. The alloy containing Ni, Al, and Cu exhibits a magnetization of 10.6 kG and a remanence ratio of 0.59. Our results indicate that magnetocrystalline anisotropy can be introduced in alnico-like magnets, adding to shape anisotropy that may be induced by field annealing.

Coercivity scaling in antidot lattices in Fe, Ni, and NiFe thin films

Energy Technology Data Exchange (ETDEWEB)

Gräfe, Joachim, E-mail: graefe@is.mpg.de; Schütz, Gisela; Goering, Eberhard J., E-mail: goering@is.mpg.de

2016-12-01

Antidot lattices can be used to artificially engineer magnetic properties in thin films, however, a conclusive model that describes the coercivity enhancement in this class of magnetic nano-structures has so far not been found. We prepared Fe, Ni, and NiFe thin films and patterned each with 21 square antidot lattices with different geometric parameters and measured their hysteretic behavior. On the basis of this extensive dataset we are able to provide a model that can describe both the coercivity scaling over a wide range of geometric lattice parameters and the influence of different materials.

Study of coercive measures in prisons and secure psychiatric hospitals: the views of inmates and caregivers

Directory of Open Access Journals (Sweden)

A. Runte-Geidel

2014-06-01

Full Text Available Aim: The aim of the study was to ascertain the opinions of both inmates and staff of prison establishments about the use of coercive measures justified for clinical reasons for people with mental health problems and about the need to create protocols to regulate the application of these measures. Method: These opinions were gathered in a Qualitative Study with Focus Groups (prison inmates and prison staff from the Granada Penitentiary Centre and the Alicante Penitentiary Psychiatric Hospital, both in Spain. Results: The results showed that forced medication is the most commonly used coercive measure in these institutions. The inmates did not understand and rejected the use of this measure, above all because they were poorly informed about their illness and the medication required to treat it. The staff however defended the benefits of psychiatric medicine, even when administered without the patient's consent. Conclusions: Both inmates and staff agreed that it would be useful to have a protocol regulating the use of coercive measures. The study has also identified a number of important factors that could help to reduce the need for coercive measures or make their use unnecessary.

Application of ECS to a hybrid automobile; `ECS` no hybrid jidosha eno tekiyo

Energy Technology Data Exchange (ETDEWEB)

Shimizu, M.; Okamura, T.

1997-01-30

This paper describes a simulation for a case when an energy capacitor system (ECS) is mounted in a hybrid electric vehicle in place of secondary batteries. The ECS is electric power storage equipment consisted of capacitors and electronic circuits, and capable of quick charge and discharge at high efficiency. Its energy density per unit weight is about the same as lead-acid batteries, but its output density is greater than any type of batteries. Being free of deterioration due to charge and discharge, its cycle life is almost limitless. In order to suppress heat generation, a switching converter is used to control the output to about 300W. However, internal resistance of an ECS is smaller than in an equivalent secondary battery, and internal loss and heat generation stay as low as 1/5 to 1/10. Discussions have been given on cases of using the ECS in small passenger cars, small buses/trucks, and large buses. Since the ECS can use the stored power to about 94% of the capacity, and its cycle life is sufficiently long, it can operate with charge capacity as small as 1/4 of a lead-acid battery. The weight can also be reduced largely. Regenerative power storage efficiency is high, fuel consumption can be improved, heat generation is less, and no forced cooling is required. 9 refs., 4 figs., 1 tab.

High-coercivity FePt sputtered films

International Nuclear Information System (INIS)

Luong, N.H.; Hiep, V.V.; Hong, D.M.; Chau, N.; Linh, N.D.; Kurisu, M.; Anh, D.T.K.; Nakamoto, G.

2005-01-01

Fe 56 Pt 44 thin films have been prepared by RF magnetron sputtering on Si substrates. The substrate temperature was kept at 350 deg C. The X-ray diffraction patterns of as-deposited FePt films exhibited a disordered structure. Annealing of the films at 650-685 deg C for 1 h yielded an ordered L1 0 phase with FCT structure. The high value for coercivity H C of 17 kOe was obtained at room temperature for the 68 nm thick film annealed at 685 deg C. The hard magnetic properties as well as grain structure of the films strongly depend on the annealing conditions

Coercivity enhancement in (Ce,Nd)-Fe-B sintered magnets prepared by adding NdH{sub x} powders

Energy Technology Data Exchange (ETDEWEB)

Zhang, Le-le [Key Laboratory of Integrated Exploitation of Bayan Obo Multi-Metal Resources, Inner Mongolia University of Science and Technology, Baotou 014010 (China); School of Science, Inner Mongolia University of Science and Technology, Baotou 014010 (China); Li, Zhu-bai, E-mail: lzbgj@163.com [Key Laboratory of Integrated Exploitation of Bayan Obo Multi-Metal Resources, Inner Mongolia University of Science and Technology, Baotou 014010 (China); Ma, Qiang; Li, Yong-feng; Zhao, Qian [Key Laboratory of Integrated Exploitation of Bayan Obo Multi-Metal Resources, Inner Mongolia University of Science and Technology, Baotou 014010 (China); School of Science, Inner Mongolia University of Science and Technology, Baotou 014010 (China); Zhang, Xue-feng, E-mail: xuefeng056@163.com [Key Laboratory of Integrated Exploitation of Bayan Obo Multi-Metal Resources, Inner Mongolia University of Science and Technology, Baotou 014010 (China); School of Science, Inner Mongolia University of Science and Technology, Baotou 014010 (China)

2017-08-01

(Ce,Nd)-Fe-B sintered magnets were prepared by the addition of NdH{sub x} powders in Ce{sub 9}Nd{sub 4.5}Fe{sub 80}B{sub 6.5} powders. The coercivity is rather low in Ce{sub 9}Nd{sub 4.5}Fe{sub 80}B{sub 6.5} magnets, and Ce element prefers to distribute at the outer-layer of main phase (Ce,Nd){sub 2}Fe{sub 14}B. The investigation of scanning electron microscope shows that the addition of NdH{sub x} powders leads to the increase of Nd content at grain outer-layer of main phase owing to the element diffusion. Magnetization reversal undergoes the nucleation of reversed domain wall at grain outer-later, and the addition of NdH{sub x} powders leads to the increase in the nucleation field of reversed domain, giving rise to the significant improvement of coercivity. The larger amount addition of NdH{sub x} powders leads to the increase in the amount of intergranular phase, resulting in the decreases of the remanence, the squareness of demagnetization curve and the maximum energy product.

Coercivity enhancement of HDDR-processed Nd-Fe-B permanent magnet with the rapid hot-press consolidation process

Energy Technology Data Exchange (ETDEWEB)

Nozawa, N. [Magnetic Materials Research Laboratory, NEOMAX Company, Hitachi Metals Ltd., Osaka 618-0013 (Japan); Sepehri-Amin, H. [Graduate School of Pure and Applied Sciences, University of Tsukuba, Tsukuba 305-8571 (Japan); Magnetic Materials Center, National Institute for Materials Science, Tsukuba 305-0047 (Japan); Ohkubo, T. [Magnetic Materials Center, National Institute for Materials Science, Tsukuba 305-0047 (Japan); Hono, K. [Graduate School of Pure and Applied Sciences, University of Tsukuba, Tsukuba 305-8571 (Japan); Magnetic Materials Center, National Institute for Materials Science, Tsukuba 305-0047 (Japan); Nishiuchi, T. [Magnetic Materials Research Laboratory, NEOMAX Company, Hitachi Metals Ltd., Osaka 618-0013 (Japan); Hirosawa, S., E-mail: Satoshi_Hirosawa@hitachi-metals.co.j [Magnetic Materials Research Laboratory, NEOMAX Company, Hitachi Metals Ltd., Osaka 618-0013 (Japan)

2011-01-15

High coercivity, fully dense anisotropic permanent magnets of submicron grain sizes were produced by rapid hot-press consolidation of hydrogenation-disproportionation-desorption-recombination (HDDR) processed Nd-Fe-Co-B powders. In the hot-press process, the coercivity of the consolidated material showed a sharp minimum prior to full densification. Thereafter, it reached a value 25% higher than that of the initial powder. Scanning electron microscopy and transmission electron microscopy observations revealed that the variation in H{sub cJ} was caused by a redistribution of Nd along the grain boundaries during hot pressing and that the high coercivity was attributable to the formation of thin, continuous Nd-rich phase along the grain boundaries.

High-coercive garnet films for thermo-magnetic recording

International Nuclear Information System (INIS)

Berzhansky, V N; Danishevskaya, Y V; Nedviga, A S; Milyukova, H T

2016-01-01

The possibility of using high-coercive of garnet films for thermo-magnetic recording is related with the presence of the metastable domain structure, which arises due to a significant mismatch of the lattice parameters of the film and the substrate. In the work the connection between facet crystal structure of elastically strained ferrite garnets films and the domain structure in them is established by methods of phase contrast and polarization microscopy. (paper)

Solutions to quasilinear equations of $N$-biharmonic type with degenerate coercivity

Directory of Open Access Journals (Sweden)

Sami Aouaoui

2014-10-01

Full Text Available In this article we show the existence of multiple solutions for quasilinear equations in divergence form with degenerate coercivity. Our strategy is to combine a variational method and an iterative technique to obtain the solutions.

Substrate bias effects on composition and coercivity of CoCrTa/Cr thin films on canasite and glass

Science.gov (United States)

Deng, Y.; Lambeth, D. N.; Sui, X.; Lee, L.-L.; Laughlin, D. E.

1993-05-01

CoCrTa/Cr thin films were prepared by rf diode sputtering onto canasite and glass substrates at various bias voltages from two targets of different compositions (Co82.8Cr14.6Ta2.6 and Co86Cr12Ta2). While Auger depth profile analysis indicates that there is some broadening at the CoCrTa-Cr interface, x-ray fluorescence spectroscopy reveals that changes in alloy composition due to the resputtering processes are even more prominent. For both targets, as the substrate bias increases the Co content in the films declines, and the magnetization decreases. The maximum film coercivity appears to correlate to the final film composition. By investigating the results from both targets, it is concluded that the coercivity reaches a maximum when the film composition is in the neighborhood of Co84Cr13Ta3. Thus, to optimize the coercivity different bias voltages are required for each target. Excessive substrate bias, however, leads to films with low magnetization and coercivity.

Synthesis, characterization and Monte Carlo simulation of CoFe2O4/Polyvinylpyrrolidone nanocomposites: The coercivity investigation

International Nuclear Information System (INIS)

Mirzaee, Sh; Farjami shayesteh, S.; Mahdavifar, S; Hekmatara, S Hoda.

2015-01-01

To study the influence of polymer matrix on the effective magnetic anisotropy constant and coercivity of magnetic nanoparticles, we have synthesized the Cobalt ferrite/Polyvinylpyrrolidone (PVP) nanocomposites by co-precipitation method in four different processes. In addition the Monte Carlo simulation and law of approach to the saturation magnetization have been applied to achieve the anisotropy constants. The obtained experimental and theoretical results showed a decrease in anisotropy constant relative to the bulk cobalt ferrite. We have showed that the PVP matrix can interact with metal cations and made them approximately immobilized to participate in spinel structure. Hence different anisotropy constants or coercivity were obtained for synthesized nanocomposites. In addition, PVP matrix can attach to the surface of magnetic particles and make them approximately non-interacting. The synthesized samples have been characterized by Fourier transform infrared spectroscopy (FT-IR) and X-ray diffraction (XRD). Magnetic measurements were made at room temperature using a vibrating sample magnetometer (VSM). - Highlights: • We studied the effect of polymer matrix on the coercivity of the CoFe 2 O 4 /PVP nanocomposites. • The polymer matrix decreases the anisotropy of the nanocomposite system. • We have synthesized nanocomposites with approximately the same size, but significantly different coercivity. • We showed that the PVP/CoFe 2 O 4 nanocomposite has the considerable coercivity due to the spin hindrance. • Magnetic properties of nanocomposites simulated by Monte Carlo method

Magnet properties of Mn70Ga30 prepared by cold rolling and magnetic field annealing

International Nuclear Information System (INIS)

Ener, Semih; Skokov, Konstantin P.; Karpenkov, Dmitriy Yu.; Kuz'min, Michael D.; Gutfleisch, Oliver

2015-01-01

The remanence and coercivity of arc melted Mn 70 Ga 30 can be substantially improved by cold rolling. For best performance the rolled material should be annealed at T=730 K in the presence of a magnetic field of 1 T. The so-obtained magnet has a remanence of 0.239 T and a coercivity of 1.24 T at room temperature. The underlying reason for the high coercivity and remanence is the increase of the content of a metastable ferrimagnetic D0 22 phase at the expense of the normally stable anti-ferromagnetic D0 19 . Magnetic field significantly increases the nucleation rate of the ferromagnetic D0 22 phase that leads to grain size refinement and as a consequence of improving remanence and coercive field. - Highlights: • Alternative synthesis method for D0 22 phase formation in Mn–Ga is developed. • Effect of cold rolling and annealing on magnetic properties of Mn 70 Ga 30 is examined. • Small magnetic fields are sufficient to accelerate nucleation of the D0 22 phase

The preparation of sintered NdFeB magnet with high-coercivity and high temperature-stability

Energy Technology Data Exchange (ETDEWEB)

Yan, G H; Chen, R J; Ding, Y; Guo, S; Lee, Don; Yan, A R, E-mail: yangh@nimte.ac.cn [Zhejiang province Key Laboratory of Magnetic Materials and Application Technology, Key Laboratory of Magnetic Materials and Devices, Ningbo Institute of Material Technology and Engineering, Chinese Academy of Sciences, Ningbo, 315201 (China)

2011-01-01

The NdFeB magnets with high intrinsic coercivity have been produced by using the conventional powder metallurgy method (including SC, HD and JM) of sintered NdFeB magnets. The effects of grain boundary phases on the microstructure and magnetic properties of as-sintered and annealed magnets have been tried to investigate. Also the Curie temperature of the magnets was studied. By adopting suitable component ratio of some heavy rare-earth atoms and some micro-quantity additives, we have prepared high-coercivity sintered NdFeB magnets with magnetic properties of {sub j}H{sub c}=36.3kOe, B{sub r}=11.7kGs and (BH){sub max}=34.0MGOe. The temperature coefficient of residual magnetic flux of the magnets (between 20 and 200 deg. C) is -0.113%/deg. C, while the temperature coefficient of intrinsic coercivity -0.355%/deg. C. The Curie temperature of the magnets is about 342 deg. C.

The preparation of sintered NdFeB magnet with high-coercivity and high temperature-stability

International Nuclear Information System (INIS)

Yan, G H; Chen, R J; Ding, Y; Guo, S; Lee, Don; Yan, A R

2011-01-01

The NdFeB magnets with high intrinsic coercivity have been produced by using the conventional powder metallurgy method (including SC, HD and JM) of sintered NdFeB magnets. The effects of grain boundary phases on the microstructure and magnetic properties of as-sintered and annealed magnets have been tried to investigate. Also the Curie temperature of the magnets was studied. By adopting suitable component ratio of some heavy rare-earth atoms and some micro-quantity additives, we have prepared high-coercivity sintered NdFeB magnets with magnetic properties of j H c =36.3kOe, B r =11.7kGs and (BH) max =34.0MGOe. The temperature coefficient of residual magnetic flux of the magnets (between 20 and 200 deg. C) is -0.113%/deg. C, while the temperature coefficient of intrinsic coercivity -0.355%/deg. C. The Curie temperature of the magnets is about 342 deg. C.

Annealing induced low coercivity, nanocrystalline Co–Fe–Si thin films exhibiting inverse cosine angular variation

Energy Technology Data Exchange (ETDEWEB)

Hysen, T., E-mail: hysenthomas@gmail.com [Department of Physics, Cochin University of Science and Technology, Cochin 682022, Kerala (India); Al-Harthi, Salim; Al-Omari, I.A. [Department of Physics, Sultan Qaboos University, PC 123, Muscat, Sultanate of Oman (Oman); Geetha, P.; Lisha, R. [Department of Physics, Cochin University of Science and Technology, Cochin 682022, Kerala (India); Ramanujan, R.V. [School of Materials Engineering, Nanyang Technological University, Singapore 639798 (Singapore); Sakthikumar, D. [Graduate School of Interdisciplinary New Science, Toyo University, Kawagoe, Saitama (Japan); Anantharaman, M.R., E-mail: mra@cusat.ac.in [Department of Physics, Cochin University of Science and Technology, Cochin 682022, Kerala (India)

2013-09-15

Co–Fe–Si based films exhibit high magnetic moments and are highly sought after for applications like soft under layers in perpendicular recording media to magneto-electro-mechanical sensor applications. In this work the effect of annealing on structural, morphological and magnetic properties of Co–Fe–Si thin films was investigated. Compositional analysis using X-ray photoelectron spectroscopy and secondary ion mass spectroscopy revealed a native oxide surface layer consisting of oxides of Co, Fe and Si on the surface. The morphology of the as deposited films shows mound like structures conforming to the Volmer–Weber growth model. Nanocrystallisation of amorphous films upon annealing was observed by glancing angle X-ray diffraction and transmission electron microscopy. The evolution of magnetic properties with annealing is explained using the Herzer model. Vibrating sample magnetometry measurements carried out at various angles from 0° to 90° to the applied magnetic field were employed to study the angular variation of coercivity. The angular variation fits the modified Kondorsky model. Interestingly, the coercivity evolution with annealing deduced from magneto-optical Kerr effect studies indicates a reverse trend compared to magetisation observed in the bulk. This can be attributed to a domain wall pinning at native oxide layer on the surface of thin films. The evolution of surface magnetic properties is correlated with morphology evolution probed using atomic force microscopy. The morphology as well as the presence of the native oxide layer dictates the surface magnetic properties and this is corroborated by the apparent difference in the bulk and surface magnetic properties. - Highlights: • The relation between grain size and magnetic properties in Co–Fe–Si thin films obeys the Herzer model. • Angular variation of coercivity is found to obey the Kondorsky model. • The MOKE measurements provide further evidence for domain wall pinning. �

Large time-dependent coercivity and resistivity modification under sustained voltage application in a Pt/Co/AlOx/Pt junction.

NARCIS (Netherlands)

Brink, van den A.; van der Heijden, M.A.J.; Swagten, H.J.M.; Koopmans, B.

2015-01-01

The coercivity and resistivity of a Pt/Co/AlOx/Pt junction are measured under sustained voltage application. High bias voltages of either polarity are determined to cause a strongly enhanced, reversible coercivity modification compared to low voltages. Time-resolved measurements show a logarithmic

Coercivity Recovery Effect of Sm-Fe-Cu-Al Alloy on Sm2Fe17N3 Magnet

Science.gov (United States)

Otogawa, Kohei; Asahi, Toru; Jinno, Miho; Yamaguchi, Wataru; Takagi, Kenta; Kwon, Hansang

2018-03-01

The potential of a Sm-Fe-Cu-Al binder for improvement of the magnetic properties of Sm2Fe17N3 was examined. Transmission electron microscope (TEM) observation of a Sm-Fe-Cu-Al alloy-bonded Sm2Fe17N3 magnet which showed high coercivity revealed that the Sm-Fe-Cu-Al alloy had an effect of removing the surface oxide layer of the Sm2 Fe17N3 grains. However, the Sm-Fe-Cu-Al binder was contaminated by carbon and nitrogen, which originated from the organic solvent used as the milling medium during pulverization. To prevent carbon and nitrogen contamination, the Sm-Fe- Cu-Al alloy was added directly on the surface of the Sm2Fe17N3 grains by sputtering. Comparing the recovered coercivity per unit amount of the added binder the uncontaminated binder-coated sample had a higher coercivity recovery effect than the milled binder-added sample. These results suggested that sufficient addition of the contamination-free Sm-Fe-Cu-Al binder has the possibility to reduce the amount of binder necessary to produce a high coercive Sm2Fe17N3 magnet.

Investigation of cellular microstructure and enhanced coercivity in sputtered Sm{sub 2}(CoCuFeZr){sub 17} film

Energy Technology Data Exchange (ETDEWEB)

Bhatt, Ranu, E-mail: rbhatt@barc.gov.in; Schütz, G. [Max Planck Institute for Intelligent Systems (formerly Max Planck Institute for Metals Research), Heisenbergstr. 3, 70569 Stuttgart (Germany); Bhatt, Pramod [Solid State Physics Division, Bhabha Atomic Research Centre, Mumbai 400 085 (India)

2014-03-14

We have investigated the effect of annealing temperature on the microstructure and magnetic properties of Sm{sub 2}(CoCuFeZr){sub 17} films prepared using ion beam sputtering at room temperature. The as-deposited film shows randomly oriented polycrystalline grains and exhibits small coercivity (H{sub C}) of 0.04 T at room temperature. Post annealing of these films at 700 °C under Ar atmosphere shows significant changes in the microstructure transforming it to the development of cellular growth, concomitant with enhanced coercivity up to 1.3 T. The enhanced coercivity is explained using the domain wall pinning mechanism.

Effect of Dursban 480 EC (chlorpyrifos) and Talstar 10 EC (bifenthrin) on the physiological and genetic diversity of microorganisms in soil.

Science.gov (United States)

Medo, Juraj; Maková, Jana; Kovácsová, Silvia; Majerčíková, Kamila; Javoreková, Soňa

2015-01-01

This investigation was undertaken to determine the impact of the insecticides Dursban 480 EC (with organophosphate compound chlorpyrifos as the active ingredient) and Talstar 10 EC (with pyrethroid bifenthrin as the active ingredient) on the respiration activity and microbial diversity in a sandy loam luvisol soil. The insecticides were applied in two doses: the maximum recommended dose for field application (15 mg kg(-1) for Dursban 480 EC and 6 mg kg(-1) for Talstar 10 EC) and a 100-fold higher dose for extrapolation of their effect. Bacterial and fungal genetic diversity was analysed in soil samples using PCR DGGE and the functional diversity (catabolic potential) was studied using BIOLOG EcoPlates at 1, 3, 7, 14, 28, 56 and 112 days after insecticide application. Five bacterial groups (α, β, γ proteobacteria, firmibacteria and actinomycetes) and five groups of fungi or fungus-like microorganisms (Ascomycota, Basidiomycota, Chytridiomycota, Oomycota and Zygomycota) were analysed using specific primer sets. This approach provides high resolution of the analysis covering majority of microorganisms in the soil. Only the high-dose Dursban 480 EC significantly changed the community of microorganisms. We observed its negative effect on α- and γ-proteobacteria, as the number of OTUs (operational taxonomic units) decreased until the end of incubation. In the β-proteobacteria group, initial increase of OTUs was followed by strong decrease. Diversity in the firmibacteria, actinomycetes and Zygomycota groups was minimally disturbed by the insecticide application. Dursban 480 EC, however, both positively and negatively affected certain species. Among negatively affected species Sphingomonas, Flavobacterium or Penicillium were detected, but Achromobacter, Luteibacter or Aspergillus were supported by applied insecticide. The analysis of BIOLOG plates using AWCD values indicated a significant increase in metabolic potential of microorganisms in the soil after the high

Hysteresis, critical fields and superferromagnetism of the film with perpendicular anisotropy

International Nuclear Information System (INIS)

Kalita, V.M.; Kulyk, M.M.; Ryabchenko, S.M.

2016-01-01

This paper is focused on the analysis of hysteresis and critical phenomena of magnetization reversal of superferromagnetic (SFM) state in nanogranular (NG) Co/Al 2 O 3 film with perpendicular anisotropy. It was demonstrated that the transition from the multidomain SFM state to the homogeneous SFM state, during the magnetization process, occurs critically. The value of the field of critical transition to the homogeneous state depends on the demagnetization field, granular anisotropy and interparticle exchange anisotropy. It turned out that the temperature dependence of the coercive force of the film, despite its SFM state, accords with the Neel–Brown formula for anisotropic single-domain ferromagnetic particles, but has an anomalous angular dependence. It was concluded that domain wall motion affects these features of the coercive field. The domain wall movement may occur due to the overturn of magnetic moments of particles in the boundaries between the superdomains. At the same time, the main factors influencing the coercivity are the anisotropy of the particles, which blocks their magnetic moment reorientation, and demagnetizing factor of the film. Together they lead to the anomalous angular dependence of the coercive field. - Highlights: • The transition from the multidomain SFM to homogeneous SFM state occurs critically. • The value of the critical field depends on the direction of the magnetizing field. • Critical transition field depends on the anisotropy of the interparticle exchange. • Dependence of H c (θ H ) differs from expected one for an ensemble of the particles. • Magnetization reversal occurs by turning the particle's moments in domain borders.

Coercive Journal Self Citations, Impact Factor, Journal Influence and Article Influence

NARCIS (Netherlands)

C-L. Chang (Chia-Lin); M.J. McAleer (Michael)

2013-01-01

textabstractThis paper examines the issue of coercive journal self citations and the practical usefulness of two recent journal performance metrics, namely the Eigenfactor score, which may be interpreted as measuring “Journal Influence”, and the Article Influence score, using the Thomson Reuters ISI

Nonlinear anisotropic elliptic equations with variable exponents and degenerate coercivity

Directory of Open Access Journals (Sweden)

Hocine Ayadi

2018-02-01

Full Text Available In this article, we prove the existence and the regularity of distributional solutions for a class of nonlinear anisotropic elliptic equations with $p_i(x$ growth conditions, degenerate coercivity and $L^{m(\\cdot}$ data, with $m(\\cdot$ being small, in appropriate Lebesgue-Sobolev spaces with variable exponents. The obtained results extend some existing ones [8,10].

Achievements and bottlenecks in humanitarian demining EU-funded research: final results from the EC DELVE project

Science.gov (United States)

Sahli, Hichem; Bruschini, Claudio; Van Kempen, Luc; Schleijpen, Ric; den Breejen, Eric

2008-04-01

The EC DELVE Support Action project has analyzed the bottlenecks in the transfer of Humanitarian Demining (HD) technology from technology development to the use in the field, and drawn some lessons learned, basing itself on the assessment of the European Humanitarian Demining Research and Technology Development (RTD) situation from early 1990 until 2006. The situation at the European level was analyzed with emphasis on activities sponsored by the European Commission (EC). This was also done for four European countries and Japan, with emphasis on national activities. The developments in HD during the last 10 years underline the fact that in a number of cases demining related developments have been terminated or at least put on hold. The study also showed that the funding provided by the EC under the Framework Program for RTD has led directly to the creation of an extensive portfolio of Humanitarian Demining technology development projects. The latter provided a range of research and supporting measures addressing the critical issues identified as a result of the regulatory policies developed in the field of Humanitarian Demining over the last ten years. However, the range of instruments available to the EC to finance the necessary research and development were limited, to pre-competitive research. The EC had no tools or programs to directly fund actual product development. As a first consequence, the EC funding program for development of technology for Humanitarian Demining unfortunately proved to be largely unsuitable for the small-scale development needed in a field where there is only a very limited market. As a second consequence, most of the research has been demonstrator-oriented. Moreover, the timeframe for RTD in Humanitarian Demining has not been sufficiently synchronized with the timeframe of the EC policies and regulations. The separation of the Mine Action and RTD funding streams in the EC did also negatively affect the take-up of new technologies. As a

High coercivity in Fe-Nb-B-Dy bulk nanocrystalline magnets

Energy Technology Data Exchange (ETDEWEB)

Ziolkowski, Grzegorz; Chrobak, Artur; Klimontko, Joanna [Institute of Physics, University of Silesia, Uniwersytecka 4, 40-007, Katowice (Poland); Chrobak, Dariusz; Rak, Jan [Institute of Materials Science, University of Silesia, 75 Pulku Piechoty 1, 41-500, Chorzow (Poland); Zivotsky, Ondrej; Hendrych, Ales [Department of Physics, VSB-TU Ostrava, Ostrava (Czech Republic)

2016-11-15

The paper refers to structural and magnetic properties of the (Fe{sub 80}Nb{sub 6}B{sub 14}){sub 1-x}Dy{sub x} (x = 0.08, 0.10, 0.12, 0.16) bulk nanocrystalline alloys prepared by making use of the vacuum suction casting technique. The samples are in a form of rods with different diameters d = 1.5, 1, and 0.5 mm. The phase structure was investigated by XRD technique and reveals an occurrence of magnetically hard Dy{sub 2}Fe{sub 14}B as well as other relatively soft Dy-Fe, Fe-B, and Fe phases dependently on the Dy content. The alloys show hard magnetic properties with high coercive field up to 5.5 T (for x = 0.12 and d = 0.5 mm). The observed magnetic hardening effect with the increase of cooling rate (decrease of sample diameter d) can be attributed to a formation of ultra-hard magnetic objects as well as increasing role of low dimensional microstructure. (copyright 2016 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim)

Coercivity degradation caused by inhomogeneous grain boundaries in sintered Nd-Fe-B permanent magnets

Science.gov (United States)

Chen, Hansheng; Yun, Fan; Qu, Jiangtao; Li, Yingfei; Cheng, Zhenxiang; Fang, Ruhao; Ye, Zhixiao; Ringer, Simon P.; Zheng, Rongkun

2018-05-01

Quantitative correlation between intrinsic coercivity and grain boundaries in three dimensions is critical to further improve the performance of sintered Nd-Fe-B permanent magnets. Here, we quantitatively reveal the local composition variation across and especially along grain boundaries using the powerful atomic-scale analysis technique known as atom probe tomography. We also estimate the saturation magnetization, magnetocrystalline anisotropy constant, and exchange stiffness of the grain boundaries on the basis of the experimentally determined structure and composition. Finally, using micromagnetic simulations, we quantify the intrinsic coercivity degradation caused by inhomogeneous grain boundaries. This approach can be applied to other magnetic materials for the analysis and optimization of magnetic properties.

Very high coercivities of top-layer diffusion Au/FePt thin films

International Nuclear Information System (INIS)

Yuan, F.T.; Chen, S.K.; Liao, W.M.; Hsu, C.W.; Hsiao, S.N.; Chang, W.C.

2006-01-01

The Au/FePt samples were prepared by depositing a gold cap layer at room temperature onto a fully ordered FePt layer, followed by an annealing at 800 deg. C for the purpose of interlayer diffusion. After the deposition of the gold layer and the high-temperature annealing, the gold atoms do not dissolve into the FePt Ll 0 lattice. Compared with the continuous FePt film, the TEM photos of the bilayer Au(60 nm)/FePt(60 nm) show a granular structure with FePt particles embedded in Au matrix. The coercivity of Au(60 nm)/FePt(60 nm) sample is 23.5 kOe, which is 85% larger than that of the FePt film without Au top layer. The enhancement in coercivity can be attributed to the formation of isolated structure of FePt ordered phase

Coercivity enhancement and thermal-stability improvement in the melt-spun NdFeB ribbons by grain boundary diffusion

Science.gov (United States)

Xie, Jiajun; Yuan, Chao; Luo, Yang; Yang, Yuanfei; Hu, Bin; Yu, Dunbo; Yan, Wenlong

2018-01-01

Rapidly quenched NdFeB ribbons with high coercivity were obtained by Nd70Cu30 diffusion process. Samples with a high coercivity of 22.02 kOe at room temperature were obtained after grain boundary diffusion with 20 wt% Nd70Cu30 alloys. The NdCu diffusion process promoted grain growth in the ribbons, and grain boundary phases were formed with Cu segregation among NdFeB grains. Coercivity above 10 kOe at 150 °C was achieved in the bonded magnets with NdCu content over 10 wt%. The flux loss of bonded magnets was reduced by ∼32% at 120 °C after diffusion treatment with only a small amount (2 wt%) of NdCu.

Developmental regulation of ecdysone receptor (EcR and EcR-controlled gene expression during pharate-adult development of honeybees (Apis mellifera.

Directory of Open Access Journals (Sweden)

Tathyana Rachel Palo Mello

2014-12-01

Full Text Available Major developmental transitions in multicellular organisms are driven by steroid hormones. In insects, these, together with juvenile hormone (JH, control development, metamorphosis, reproduction and aging, and are also suggested to play an important role in caste differentiation of social insects. Here, we aimed to determine how EcR transcription and ecdysteroid titers are related during honeybee postembryonic development and what may actually be the role of EcR in caste development of this social insect. In addition, we expected that knocking-down EcR gene expression would give us information on the participation of the respective protein in regulating downstream targets of EcR. We found that in Apis mellifera females, EcR-A is the predominantly expressed variant in postembryonic development, while EcR-B transcript levels are higher in embryos, indicating an early developmental switch in EcR function. During larval and pupal stages, EcR-B expression levels are very low, while EcR-A transcripts are more variable and abundant in workers compared to queens. Strikingly, these transcript levels are opposite to the ecdysteroid titer profile. 20-hydroxyecdysone (20E application experiments revealed that low 20E levels induce EcR expression during development, whereas high ecdysteroid titers seem to be repressive. By means of RNAi-mediated knockdown (KD of both EcR transcript variants we detected the differential expression of 234 poly-A+ transcripts encoding genes such as CYPs, MRJPs and certain hormone response genes (Kr-h1 and ftz-f1. EcR-KD also promoted the differential expression of 70 miRNAs, including highly conserved ones (e.g. miR-133 and miR-375, as well honeybee-specific ones (e.g. miR-3745 and miR-3761. Our results put in evidence a broad spectrum of EcR-controlled gene expression during postembryonic development of honeybees, revealing new facets of EcR biology in this social insect.

Adaptation of the Emotional Contagion Scale (ECS and gender differences within the Greek cultural context

Directory of Open Access Journals (Sweden)

Damigos Dimitris

2008-08-01

Full Text Available Abstract Background The Emotional Contagion Scale (ECS is a self-report scale used to measure individual differences in susceptibility to converge towards the emotions expressed by others. The main aim of the present paper was to examine the psychometric properties of the Greek translation of the scale. Methods The Greek ECS was completed by 691 undergraduate students (312 males and 379 females. To investigate the factor structure of the ECS, principal components analysis (PCA was used. Results The results showed that a four-factor model was tenable. Regarding homogeneity, the Greek ECS version showed acceptable results for the full scale (α = 0.74 but not for all subscales. Gender differences were also identified concerning the susceptibility to emotional contagion between men and women. Women score significantly higher than men for all the different emotions described by the ECS (love, happiness, sadness except the anger emotion, where there was no significant difference. Conclusion The Greek version of the ECS showed good psychometric properties. It can be used to assess susceptibility to emotional contagion in correlation with psychopathological processes, mood and anxiety disorders primarily. The usefulness of the ECS in the fields of group psychotherapy and health psychology is also under consideration. Further investigation is needed in all these areas.

Power Structure in Family and Coercive Trends Consequence of it Based on Women’s Emotional Energy and Economic Situation in Abdanan

Directory of Open Access Journals (Sweden)

مریم مختاری

2014-01-01

Full Text Available This research carried out with the purpose of determining role of women’s emotional energy and economic situation in power structure in family and coercive trends consequence of it in Abdanan. Subject of power in family is one of the considered  problems in Sociology. In this way role of two differential factors (emotional energy and economic situation is thinkful. Research method was survey and population were all of married women in Abdanan that were selected 400women as a sample size with performance of multy stage cluster sampling. A researcher-made questionnaire was used for data collection. In this research power structure considered as a mediator variable. Research finging showed that there is significant and direct relation between emotional energy and power structure in family but there isn’t significant relation between economic situation and power structure in family. Relation between variables and coercive trends as a dependent variable is expressive of significant and direct relation between emotional energy and coercive trends. There is significant and reverse relation between economic situation and coercive trends and also significant and direct relation between power structure in family and coercive trends.

Predicting sexual coercion in early adulthood: The transaction among maltreatment, gang affiliation, and adolescent socialization of coercive relationship norms.

Science.gov (United States)

Ha, Thao; Kim, Hanjoe; Christopher, Caroline; Caruthers, Allison; Dishion, Thomas J

2016-08-01

This study tested a transactional hypothesis predicting early adult sexual coercion from family maltreatment, early adolescent gang affiliation, and socialization of adolescent friendships that support coercive relationship norms. The longitudinal study of a community sample of 998 11-year-olds was intensively assessed in early and middle adolescence and followed to 23-24 years of age. At age 16-17 youth were videotaped with a friend, and their interactions were coded for coercive relationship talk. Structural equation modeling revealed that maltreatment predicted gang affiliation during early adolescence. Both maltreatment and gang affiliation strongly predicted adolescent sexual promiscuity and coercive relationship norms with friends at age 16-17 years. Adolescent sexual promiscuity, however, did not predict sexual coercion in early adulthood. In contrast, higher levels of observed coercive relationship talk with a friend predicted sexual coercion in early adulthood for both males and females. These findings suggest that peers have a socialization function in the development of norms prognostic of sexual coercion, and the need to consider peers in the promotion of healthy relationships.

Micromagnetic simulation of the orientation dependence of grain boundary properties on the coercivity of Nd-Fe-B sintered magnets

Directory of Open Access Journals (Sweden)

Jun Fujisaki

2016-05-01

Full Text Available This paper is focused on the micromagnetic simulation study about the orientation dependence of grain boundary properties on the coercivity of polycrystalline Nd-Fe-B sintered magnets. A multigrain object with a large number of meshes is introduced to analyze such anisotropic grain boundaries and the simulation is performed by combining the finite element method and the parallel computing. When the grain boundary phase parallel to the c-plane is less ferromagnetic the process of the magnetization reversal changes and the coercivity of the multigrain object increases. The simulations with various magnetic properties of the grain boundary phases are executed to search for the way to enhance the coercivity of polycrystalline Nd-Fe-B sintered magnets.

Sex-Symmetric Effects of Coercive Behaviors on Mental Health? Not Exactly

Science.gov (United States)

Prospero, Moises

2009-01-01

The present study tested a section of the model of coercion in intimate partner violence (IPV) by investigating the relationships among coercion, IPV and mental health symptoms. The study's sample consisted of 573 culturally diverse university students (age M = 21.4) who completed a survey that measured past IPV victimization, coercive behaviors,…

Studies on absorption of EC waves in assisted startup experiment on FTU

Science.gov (United States)

Granucci, G.; Ricci, D.; Farina, D.; Figini, L.; Iraji, D.; Tudisco, O.; Ramponi, G.; Bin, W.

2012-09-01

Assistance of EC wave for plasma breakdown and current ramp up is the proposed scenario for the ITER case, characterized by low toroidal electric field. The experimental results on many tokamaks clearly indicate the capabilities of the proposed scheme to have a robust breakdown in ITER. The key aspect of this technique is the EC power required, strongly related to the absorption of the wave in the initial stage of plasma formation. This aspect is generally neglected due to the diagnostics difficulties in the plasma formation phase. As a consequence a multi-pass absorption scheme is usually considered reasonable, leading to a strong absorption after many reflections on the walls. The present study exploits the high temporal and spatial resolution of the fast scanning interferometer of FTU together with the measure of residual power obtained by a sniffer probe. The absorbed EC power is calculated considering also the polarization rotation and the subsequent mode conversion after incidence on the internal wall and compared with that derived from experimental data. The resulting EC power distribution can explain differences observed between perpendicular and oblique injection results, indicating future investigations to define ITER power requirements.

Studies on absorption of EC waves in assisted startup experiment on FTU

Directory of Open Access Journals (Sweden)

Ramponi G.

2012-09-01

Full Text Available Assistance of EC wave for plasma breakdown and current ramp up is the proposed scenario for the ITER case, characterized by low toroidal electric field. The experimental results on many tokamaks clearly indicate the capabilities of the proposed scheme to have a robust breakdown in ITER. The key aspect of this technique is the EC power required, strongly related to the absorption of the wave in the initial stage of plasma formation. This aspect is generally neglected due to the diagnostics difficulties in the plasma formation phase. As a consequence a multi-pass absorption scheme is usually considered reasonable, leading to a strong absorption after many reflections on the walls. The present study exploits the high temporal and spatial resolution of the fast scanning interferometer of FTU together with the measure of residual power obtained by a sniffer probe. The absorbed EC power is calculated considering also the polarization rotation and the subsequent mode conversion after incidence on the internal wall and compared with that derived from experimental data. The resulting EC power distribution can explain differences observed between perpendicular and oblique injection results, indicating future investigations to define ITER power requirements.

Uncertainty in CH4 and N2O emission estimates from a managed fen meadow using EC measurements

International Nuclear Information System (INIS)

Kroon, P.S.; Hensen, A.; Van 't Veen, W.H.; Vermeulen, A.T.; Jonker, H.

2009-02-01

The overall uncertainty in annual flux estimates derived from chamber measurements may be as high as 50% due to the temporal and spatial variability in the fluxes. As even a large number of chamber plots still cover typically less than 1% of the total field area, the field-scale integrated emission necessarily remains a matter of speculation. High frequency micrometeorological methods are a good option for obtaining integrated estimates on a hectare scale with a continuous coverage in time. Instrumentation is now becoming available that meets the requirements for CH4 and N2O eddy covariance (EC) measurements. A system consisting of a quantum cascade laser (QCL) spectrometer and a sonic anemometer has recently been proven to be suitable for performing EC measurements. This study analyses the EC flux measurements of CH4 and N2O and its corrections, like calibration, Webb-correction, and corrections for high and low frequency losses, and assesses the magnitude of the uncertainties associated with the precision of the measurement instruments, measurement set-up and the methodology. The uncertainty of one single EC flux measurement, a daily, monthly and 3-monthly average EC flux is estimated. In addition, the cumulative emission of C-CH4 and N-N2O and their uncertainties are determined over several fertilizing events at a dairy farm site in the Netherlands. These fertilizing events are selected from the continuously EC flux measurements from August 2006 to September 2008. The EC flux uncertainties are compared by the overall uncertainty in annual flux estimates derived from chamber measurements. It will be shown that EC flux measurements can decrease the overall uncertainty in annual flux estimates

Uncertainty in CH4 and N2O emission estimates from a managed fen meadow using EC measurements

Energy Technology Data Exchange (ETDEWEB)

Kroon, P.S.; Hensen, A.; Van ' t Veen, W.H.; Vermeulen, A.T. [ECN Biomass, Coal and Environment, Petten (Netherlands); Jonker, H. [Delft University of Technology, Delft (Netherlands)

2009-02-15

The overall uncertainty in annual flux estimates derived from chamber measurements may be as high as 50% due to the temporal and spatial variability in the fluxes. As even a large number of chamber plots still cover typically less than 1% of the total field area, the field-scale integrated emission necessarily remains a matter of speculation. High frequency micrometeorological methods are a good option for obtaining integrated estimates on a hectare scale with a continuous coverage in time. Instrumentation is now becoming available that meets the requirements for CH4 and N2O eddy covariance (EC) measurements. A system consisting of a quantum cascade laser (QCL) spectrometer and a sonic anemometer has recently been proven to be suitable for performing EC measurements. This study analyses the EC flux measurements of CH4 and N2O and its corrections, like calibration, Webb-correction, and corrections for high and low frequency losses, and assesses the magnitude of the uncertainties associated with the precision of the measurement instruments, measurement set-up and the methodology. The uncertainty of one single EC flux measurement, a daily, monthly and 3-monthly average EC flux is estimated. In addition, the cumulative emission of C-CH4 and N-N2O and their uncertainties are determined over several fertilizing events at a dairy farm site in the Netherlands. These fertilizing events are selected from the continuously EC flux measurements from August 2006 to September 2008. The EC flux uncertainties are compared by the overall uncertainty in annual flux estimates derived from chamber measurements. It will be shown that EC flux measurements can decrease the overall uncertainty in annual flux estimates.

The EC-ASEAN COGEN programme

Energy Technology Data Exchange (ETDEWEB)

Pennington, M.; Lacrosse, L. [Asian Institute of Technology (Thailand); Schenkel, Y. [Centre de Recherches Agronomiques (Belgium)

1996-12-31

The EC-ASEAN COGEN Programme is a co-operation programme between the European Commission (EC) and the Association of South East Asian Nations (ASEAN) co-ordinated by the Asian Institute of Technology (AIT), Bangkok, Thailand. Its aim is to accelerate the implementation of proven technologies generating heat and/or power from wood and agroindustrial residues through partnerships between European and ASEAN companies. (orig.)

The EC-ASEAN COGEN programme

Energy Technology Data Exchange (ETDEWEB)

Pennington, M; Lacrosse, L [Asian Institute of Technology (Thailand); Schenkel, Y [Centre de Recherches Agronomiques (Belgium)

1997-12-31

The EC-ASEAN COGEN Programme is a co-operation programme between the European Commission (EC) and the Association of South East Asian Nations (ASEAN) co-ordinated by the Asian Institute of Technology (AIT), Bangkok, Thailand. Its aim is to accelerate the implementation of proven technologies generating heat and/or power from wood and agroindustrial residues through partnerships between European and ASEAN companies. (orig.)

Evaluation of the size segregation of elemental carbon (EC emission in Europe: influence on the simulation of EC long-range transportation

Directory of Open Access Journals (Sweden)

Y. Chen

2016-02-01

Full Text Available Elemental Carbon (EC has a significant impact on human health and climate change. In order to evaluate the size segregation of EC emission in the EUCAARI inventory and investigate its influence on the simulation of EC long-range transportation in Europe, we used the fully coupled online Weather Research and Forecasting/Chemistry model (WRF-Chem at a resolution of 2 km focusing on a region in Germany, in conjunction with a high-resolution EC emission inventory. The ground meteorology conditions, vertical structure and wind pattern were well reproduced by the model. The simulations of particle number and/or mass size distributions were evaluated with observations at the central European background site Melpitz. The fine mode particle concentration was reasonably well simulated, but the coarse mode was substantially overestimated by the model mainly due to the plume with high EC concentration in coarse mode emitted by a nearby point source. The comparisons between simulated EC and Multi-angle Absorption Photometers (MAAP measurements at Melpitz, Leipzig-TROPOS and Bösel indicated that the coarse mode EC (ECc emitted from the nearby point sources might be overestimated by a factor of 2–10. The fraction of ECc was overestimated in the emission inventory by about 10–30 % for Russia and 5–10 % for Eastern Europe (e.g., Poland and Belarus. This incorrect size-dependent EC emission results in a shorter atmospheric life time of EC particles and inhibits the long-range transport of EC. A case study showed that this effect caused an underestimation of 20–40 % in the EC mass concentration in Germany under eastern wind pattern.

Magnetic properties and microstructure study of high coercivity Au/FePt/Au trilayer thin films

International Nuclear Information System (INIS)

Chen, S.K.; Yuan, F.T.; Liao, W.M.; Hsu, C.W.; Horng, Lance

2006-01-01

High-coercivity Au(60 nm)/FePt(δ nm)/Au(60 nm) trilayer samples were prepared by sputtering at room temperature, followed by post annealing at different temperatures. For the sample with δ=60 nm, L1 ordering transformation occurs at 500 deg. C. Coercivity (H c ) is increased with the annealing temperature in the studied range 400-800 deg. C. The H c value of the trilayer films is also varied with thickness of FePt intermediate layer (δ), from 27 kOe for δ=60 nm to a maximum value of 33.5 kOe for δ=20 nm. X-ray diffraction data indicate that the diffusion of Au atoms into the FePt L1 lattice is negligible even after a high-temperature (800 deg. C) annealing process. Furthermore, ordering parameter is almost unchanged as δ is reduced from 60 to 15 nm. Transmission electron microscope (TEM) photos indicate that small FePt Ll particles are dispersed amid the large-grained Au. We believe that the high coercivity of the trilayer sample is attributed to the small and uniform grain sizes of the highly ordered FePt particles which have perfect phase separation with Au matrix

Magnet properties of Mn{sub 70}Ga{sub 30} prepared by cold rolling and magnetic field annealing

Energy Technology Data Exchange (ETDEWEB)

Ener, Semih, E-mail: ener@fm.tu-darmstadt.de [Materials Science, Technische Universität Darmstadt, 64287 Darmstadt (Germany); Skokov, Konstantin P. [Materials Science, Technische Universität Darmstadt, 64287 Darmstadt (Germany); Karpenkov, Dmitriy Yu. [Materials Science, Technische Universität Darmstadt, 64287 Darmstadt (Germany); Faculty of Physics, Tver State University, 170100 Tver (Russian Federation); Immanuel Kant Baltic Federal University, 236041 Kaliningrad (Russian Federation); Kuz' min, Michael D. [Materials Science, Technische Universität Darmstadt, 64287 Darmstadt (Germany); Gutfleisch, Oliver [Materials Science, Technische Universität Darmstadt, 64287 Darmstadt (Germany); Fraunhofer IWKS, Project Group for Material Cycles and Resource Strategy, 63457 Hanau (Germany)

2015-05-15

The remanence and coercivity of arc melted Mn{sub 70}Ga{sub 30} can be substantially improved by cold rolling. For best performance the rolled material should be annealed at T=730 K in the presence of a magnetic field of 1 T. The so-obtained magnet has a remanence of 0.239 T and a coercivity of 1.24 T at room temperature. The underlying reason for the high coercivity and remanence is the increase of the content of a metastable ferrimagnetic D0{sub 22} phase at the expense of the normally stable anti-ferromagnetic D0{sub 19}. Magnetic field significantly increases the nucleation rate of the ferromagnetic D0{sub 22} phase that leads to grain size refinement and as a consequence of improving remanence and coercive field. - Highlights: • Alternative synthesis method for D0{sub 22} phase formation in Mn–Ga is developed. • Effect of cold rolling and annealing on magnetic properties of Mn{sub 70}Ga{sub 30} is examined. • Small magnetic fields are sufficient to accelerate nucleation of the D0{sub 22} phase.

A harsh parenting team? Maternal reports of coparenting and coercive parenting interact in association with children's disruptive behaviour.

Science.gov (United States)

Latham, Rachel M; Mark, Katharine M; Oliver, Bonamy R

2017-05-01

Parenting and coparenting are both important for children's adjustment, but their interaction has been little explored. Using a longitudinal design and considering two children per family, we investigated mothers' and fathers' perceptions of coparenting as moderators of associations between their coercive parenting and children's disruptive behaviour. Mothers and fathers from 106 'intact' families were included from the Twins, Family and Behaviour study. At Time 1 (M child age  = 3 years 11 months, SD child age  = 4.44 months) parents reported on their coercive parenting and children's disruptive behaviour via questionnaire; at Time 2 (M child age  = 4 years 8 months, SD child age  = 4.44 months) perceptions of coparenting and the marital relationship were collected by telephone interview. Questionnaire-based reports of children's disruptive behaviour were collected at follow-up (M child age  = 5 years 11 months, SD child age  = 5.52 months). Multilevel modelling was used to examine child-specific and family-wide effects. Conservative multilevel models including both maternal and paternal perceptions demonstrated that maternal perceptions of coparenting and overall coercive parenting interacted in their prediction of parent-reported child disruptive behaviour. Specifically, accounting for perceived marital quality, behavioural stability, and fathers' perceptions, only in the context of perceived higher quality coparenting was there a positive association between mother-reported overall coercive parenting and children's disruptive behaviour at follow-up. When combined with highly coercive parenting, maternal perceptions of high quality coparenting may be detrimental for children's adjustment. © 2016 Association for Child and Adolescent Mental Health.

Differentiating between Confrontive and Coercive Kinds of Parental Power-Assertive Disciplinary Practices

Science.gov (United States)

Baumrind, Diana

2012-01-01

In this essay, I differentiate between coercive and confrontive kinds of power assertion to elucidate the significantly different effects on children's well-being of authoritarian and authoritative styles of parental authority. Although both parenting styles (in contrast to the permissive style) are equally demanding, forceful, and…

Coercivity enhancement of sintered Nd-Fe-B magnets by chemical bath deposition of TbCl{sub 3}

Energy Technology Data Exchange (ETDEWEB)

Guo, Shuai, E-mail: gshuai@nimte.ac.cn; Zhang, Xiaofeng; Ding, Guangfei; Chen, Renjie; Yan, Aru [Key Laboratory of Magnetic Materials and Devices, Ningbo Institute of Material Technology and Engineering, Chinese Academy of Sciences, Ningbo 315201 (China); Zhejiang Province Key Laboratory of Magnetic Materials and Application Technology, Ningbo Institute of Material Technology and Engineering, Chinese Academy of Sciences, Ningbo 315201 (China); Lee, Don [Key Laboratory of Magnetic Materials and Devices, Ningbo Institute of Material Technology and Engineering, Chinese Academy of Sciences, Ningbo 315201 (China); University of Dayton, Dayton, Ohio 45469 (United States)

2014-05-07

The chemical bath deposition (CBD) and the grain boundary diffusion method were combined to diffuse the heavy rare earth for obtain the thick magnets with high coercivity and low heavy rare earth. The jet mill powders were soaked into the alcohol solution of 0.2 wt. % TbCl{sub 3}. A thin layer of TbCl{sub 3} was wrapped to the surface of (PrNd){sub 2}Fe{sub 14}B powder particles. The coercivity of magnet is increased from 11.89 kOe to 14.72 kOe without significant reduction of remanence after grain boundary diffusion in the sintering and the annealing processes. The temperature coefficients of the remanence and the coercivity are improved by the substitution of PrNd by Tb in the surface of grains. The highly accelerated temperature/humidity stress test (HAST) results indicate that the CBD magnet has poor corrosion resistance, attributing to the present of Cl atoms in the grain boundaries.

Roles of major organizations in EC for decision making. EC no ishi kettei ni okeru shuyo kikan no yakuwari

Energy Technology Data Exchange (ETDEWEB)

Kodama, M.

1992-12-01

This paper considers authorization powers held by the major organizations in the EC, with the Maastricht Treaty kept in mind. One of the objectives of establishing the EC is to harmonize and develop the economic activities in the community on the whole, and promote making closer the relations among the member nations. The EC's supernationality has two aspects: finances (using financial sources from externally common tariffs as the EC's independent financial resources) and legislations (member nations delegating their own powers to the international organization). Organizations involving in the EC legislations are the European Assembly, the board of ministers, and the EC Committee. The Assembly has deciding powers at high levels on the EC budget decision, as well as vetoing power on the budget. The board of ministers is provided with deciding powers to assure achievement of the objectives defined in the official requirements. The Committee has a supernational character that each committee member can act independently free from being subjected to orders from his or her native country. Practically, however, the authorization relationship among the organizations has confrontations over the interests of the organizations and member nations. There have been such movements in this situation as the Luxemburg compromises, actions at the agricultural ministers meeting, and preparation of the unified European protocol. 2 figs., 4 tabs.

Public Availability to ECS Collected Datasets

Science.gov (United States)

Henderson, J. F.; Warnken, R.; McLean, S. J.; Lim, E.; Varner, J. D.

2013-12-01

Coastal nations have spent considerable resources exploring the limits of their extended continental shelf (ECS) beyond 200 nm. Although these studies are funded to fulfill requirements of the UN Convention on the Law of the Sea, the investments are producing new data sets in frontier areas of Earth's oceans that will be used to understand, explore, and manage the seafloor and sub-seafloor for decades to come. Although many of these datasets are considered proprietary until a nation's potential ECS has become 'final and binding' an increasing amount of data are being released and utilized by the public. Data sets include multibeam, seismic reflection/refraction, bottom sampling, and geophysical data. The U.S. ECS Project, a multi-agency collaboration whose mission is to establish the full extent of the continental shelf of the United States consistent with international law, relies heavily on data and accurate, standard metadata. The United States has made it a priority to make available to the public all data collected with ECS-funding as quickly as possible. The National Oceanic and Atmospheric Administration's (NOAA) National Geophysical Data Center (NGDC) supports this objective by partnering with academia and other federal government mapping agencies to archive, inventory, and deliver marine mapping data in a coordinated, consistent manner. This includes ensuring quality, standard metadata and developing and maintaining data delivery capabilities built on modern digital data archives. Other countries, such as Ireland, have submitted their ECS data for public availability and many others have made pledges to participate in the future. The data services provided by NGDC support the U.S. ECS effort as well as many developing nation's ECS effort through the U.N. Environmental Program. Modern discovery, visualization, and delivery of scientific data and derived products that span national and international sources of data ensure the greatest re-use of data and

Electric field mediated non-volatile tuning magnetism in CoPt/PMN-PT heterostructure for magnetoelectric memory devices

Science.gov (United States)

Yang, Y. T.; Li, J.; Peng, X. L.; Wang, X. Q.; Wang, D. H.; Cao, Q. Q.; Du, Y. W.

2016-02-01

We report a power efficient non-volatile magnetoelectric memory in the CoPt/(011)PMN-PT heterostructure. Two reversible and stable electric field induced coercivity states (i.e., high-HC or low-HC) are obtained due to the strain mediated converse magnetoelectric effect. The reading process of the different coercive field information written by electric fields is demonstrated by using a magnetoresistance read head. This result shows good prospects in the application of novel multiferroic devices.

Dual EC : a standardized back door

NARCIS (Netherlands)

Bernstein, D.J.; Lange, T.; Niederhagen, R.F.

2015-01-01

Dual EC is an algorithm to compute pseudorandom numbers starting from some random input. Dual EC was standardized by NIST, ANSI, and ISO among other algorithms to generate pseudorandom numbers. For a long time this algorithm was considered suspicious -- the entity designing the algorithm could have

Attitude of young psychiatrists toward coercive measures in psychiatry: a case vignette study in Japan

Directory of Open Access Journals (Sweden)

Wake Yosuke

2009-09-01

Full Text Available Abstract Background Every psychiatrist must pay careful attention to avoid violating human rights when initiating coercive treatments such as seclusion and restraint. However, these interventions are indispensable in clinical psychiatry, and they are often used as strategies to treat agitated patients. In this study, we investigated young psychiatrists' attitudes toward psychiatric coercive measures. Methods A total of 183 young psychiatrists participated as subjects in our study. A questionnaire with a case vignette describing a patient with acute psychosis was sent to the study subjects via the Internet or by mail. This questionnaire included scoring the necessity for hospitalization, and the likelihood of prescribing seclusion and/or restraint, on a 9-point Likert scale (with 9 indicating strong agreement. Results There was general agreement among the study subjects that the case should be admitted to a hospital (8.91 ± 0.3 and secluded (8.43 ± 1.0. The estimated length of hospitalization was 13.53 ± 6.4 weeks. Regarding the likelihood of prescribing restraint, results showed great diversity (5.14 ± 2.5 on 9-point scale; psychiatrists working at general hospitals scored significantly higher (6.25 ± 2.5 than those working at university hospitals (5.02 ± 2.3 or psychiatric hospitals (4.15 ± 2.6. A two-group comparison of the length of inpatient care revealed a significant difference between those psychiatrists who scored 1-3 (n = 55, 14.22 ± 7.4 wks and those who scored 7-9 (n = 62, 12.22 ± 4.0 regarding the need to use restraint. Conclusion Our results may reflect the current dilemma in Japanese psychiatry wherein psychiatrists must initiate coercive measures to shorten hospitalization stays. This study prompted its subject psychiatrists to consider coercive psychiatric treatments.

Demonstration of sawtooth period control with EC waves in KSTAR plasma

Directory of Open Access Journals (Sweden)

Jeong J. H.

2015-01-01

Full Text Available The sawtooth period control in tokamak is important issue in recent years because the sawtooth crash can trigger TM/NTM instabilities and drive plasmas unstable. The control of sawtooth period by the modification of local current profile near the q=1 surface using ECCD has been demonstrated in a number of tokamaks [1, 2] including KSTAR. As a result, developing techniques to control the sawtooth period as a way of controlling the onset of NTM has been an important area of research in recent years [3]. In 2012 KSTAR plasma campaign, the sawtooth period control is carried out by the different deposition position of EC waves across the q=1 surface. The sawtooth period is shortened by on-axis co-ECCD (destabilization, and the stabilization of the sawtooth is also observed by off-axis co-ECCD at outside q=1 surface. In 2013 KSTAR plasma campaign, the sawtooth locking experiment with periodic forcing of 170 GHz EC wave is carried out to control the sawtooth period. The optimal target position which lengthens the sawtooth period is investigated by performing a scan of EC beam deposition position nearby q=1 surface at the toroidal magnetic field of 2.9 T and plasma current of 0.7 MA. The sawtooth locking by the modulated EC beam is successfully demonstrated as in [3-5] with the scan of modulation-frequency and duty-ratio at the low beta (βN~0.5 plasma. In this paper, the sawteeth behavior by the location of EC beam and the preliminary result of the sawtooth locking experiments in KSTAR will be presented.

Judicial Protection in the Field of Public Procurement: The Transposition into Dutch Law of Directive 2007/66/EC Amending the Remedies Directives

Directory of Open Access Journals (Sweden)

Wouter-Jan Berends

2010-08-01

Full Text Available Public procurement procedures in the EU are coordinated by Directives 2004/17/EC and 2004/18/EC. The acquis communautaire provides minimum requirements for review procedures against public procurement decisions in order to ensure access to effective remedies for economic operators. These minimum requirements are established in Directives 89/665/ EEC and 92/13/EEC and recently amended by Directive 2007/66/EC. The Helby report identified several substantive concerns over the Dutch proposal on the implementation the of the Remedies Directive; Wet implementatie rechtsbeschermingsrichtlijnen. Although the transposition target date has not been met, the Dutch legislature has succeeded to transpose Directive 2007/66/EC into Dutch law while addressing the concerns of the Helby report.

Study of Synergetic Effect of X2 and X3 EC Wave in KSTAR

Directory of Open Access Journals (Sweden)

Bae Y.S.

2015-01-01

Full Text Available An experimental study of the X-mode absorption at the second and the third harmonic frequencies has been performed in KSTAR tokamak. The X2 EC frequency is 110 GHz and the X3 EC frequency is 170 GHz at the nominal KSTAR operating toroidal magnetic field. From the 1-D model of the synergetic effect, the X3 cold resonance should lie at low field side with the X2 cold resonance at the high field side to meet the condition which both X2 and X3 EC waves interact with the same resonant electron at the same radial position. However, 170 GHz X3 cold resonance lies at the high field side with distance of 54 mm from the X2 cold resonance position in KSTAR. This paper presents the study of the synergetic effect of X3 absorption by the X2 ECCD with a scheme of two beam target positions at the same flux surface by scanning the poloidal and toroidal beam injection angles to enhance X3 absorption even in the low temperature plasma in KSTAR. For this study, the3D relativistic ray/tracing and Fokker-Planck codes C3PO/LUKE is used for the quantitative prediction of its synergetic effect. The C3PO/LUKE codes are appropriate for X2 and X3 synergy calculations as the distribution function can be calculated with either one or both waves affecting the absorption rate of each other. This paper also introduces the future ECH system upgrade plan.

Programming Amazon EC2

CERN Document Server

Vliet, Jurg

2011-01-01

If you plan to use Amazon Web Services to run applications in the cloud, the end-to-end approach in this book will save you needless trial and error. You'll find practical guidelines for designing and building applications with Amazon Elastic Compute Cloud (EC2) and a host of supporting AWS tools, with a focus on critical issues such as load balancing, monitoring, and automation. How do you move an existing application to AWS, or design your application so that it scales effectively? How much storage will you require? Programming Amazon EC2 not only helps you get started, it will also keep y

Austria's environmental law in comparison with the environmental law of the EC

International Nuclear Information System (INIS)

Jantscher, S.H.

1991-11-01

The thesis describes and compares the environmental legislation in Austria and the EC. A short introduction into structure and organization of EC-institutions and EC-legislation in followed by an examination of the constitutional foundations of environmental policy in Austria and the EC respectively. After the adoption for the Single European Act, the EEC-Treaty provides for objectives, orientation criteria and instruments regarding environmental protection. These provisions constitute a valid basis for environmental action. The adoption of a constitutional law does equally declare environmental protection as an objective of the state in Austria, however, its significance is regarded as rather controversial. Some provinces ('Laender') have shown a higher degree of sensitivity in their constitutions . The distribution of powers between the EC and its member stated in the field of environmental protection is of particular interests. It is shown, that the principle of subsidiarity and the safeguard-clauses leave discretion to the member states. Much will be determined by the European Court of Justice (ECJ) . Main emphasis has been placed on the description and comparison of Austria's and the EEC-environmental legislation. Environmental legislation of Austria as well as the EC is outlined sector by sector (i.e. water, air, chemicals, waste, soil, fauna and flora) and subsequently the object of a detailed comparison. Criteria, such as - preventiveness -stringency - focus, depth and comprehensiveness - clearness and legal force of the regulations have been applied. For most of the mentioned sectors it is correct to state, that Austria's legislation is more preventive, advanced, comprehensive and stringent (especially regulations related to water, waste, chemicals, also air) . However, there are particular areas (e.g. air quality objectives, noise limits for construction plants) where Austria' s legislation may well get a fresh impetus

Design and fabrication of sintered Nd-Fe-B magnets with a low temperature coefficient of intrinsic coercivity

Directory of Open Access Journals (Sweden)

Cui X.G.

2009-01-01

Full Text Available To decrease the temperature coefficients of sintered Nd-Fe-B magnets, the influencing factors on temperature coefficients, especially the reversible temperature coefficient β of intrinsic coercivity Hcj, were analyzed. The results showed that the absolute value of β decreased with increasing Hcj and also the ratio of microstructure parameter c to Neff, indicating that the increase of magnetocrystalline anisotropy field HA and c/Neff can effectively decrease the absolute value of β. On the basis of this analysis, a sintered Nd-Fe-B magnet with a low temperature coefficient of Hcj was fabricated through composition design, and the value of β was only -0.385%/ºC in the temperature interval of 20-150ºC.

Evaluation of the size segregation of elemental carbon (EC) emission in Europe: Influence on the simulation of EC long-range transportation

NARCIS (Netherlands)

Chen, Y.; Cheng, Y.F.; Nordmann, S.; Birmili, W.; Denier Van Der Gon, H.A.C.; Ma, N.; Wolke, R.; Wehner, B.; Sun, J.; Spindler, G.; Mu, Q.; Pöschl, U.; Su, H.; Wiedensohler, A.

2016-01-01

Elemental Carbon (EC) has a significant impact on human health and climate change. In order to evaluate the size segregation of EC emission in the EUCAARI inventory and investigate its influence on the simulation of EC long-range transportation in Europe, we used the fully coupled online Weather

Technique charts for EC film: direct optical measurements to account for the effects of X-ray scatter

International Nuclear Information System (INIS)

Munro, Peter; Jordan, Kevin; Lewis, Craig; Heerema, Tim

2001-01-01

Purpose: To develop a method of measuring technique charts for enhanced contrast (EC) film, to demonstrate how X-ray scatter changes the response of EC film, and to generate technique charts for general use. Methods and Materials: We have developed a 'digital cassette' - consisting of a metal plate/phosphor screen, a light guide, a photodiode sensor, and an electrometer - that can be used to measure the light generated in the phosphor screen of the film cassette. In turn, these measurements can be used to generate technique charts for EC film. The digital cassette has been used to measure technique charts for 4-MV and 6-MV X-ray beams for a variety of different phantom thicknesses, field sizes, and phantom-to-cassette air gaps. Results and Discussion: We have observed that the signals generated in an ionization chamber located 9.4 cm behind a 30-cm-thick water-equivalent phantom increase by a factor of 1.9 when the field size is increased from 4x4 cm 2 to 40x40 cm 2 when irradiated by a 6-MV X-ray beam. However, the change in EC film response is a factor of 3.5 under the same conditions. Irradiations to optimally expose the EC film predicted by the digital cassette differ by up to 82% compared to those predicted by ion chamber measurements. Nevertheless, the technique charts measured using the digital cassette predict the response of the EC film to ±0.2 optical density. The overresponse of the EC film is most likely due to low-energy scattered photons, which interact with the high atomic number (Z=64) phosphor screen of the enhanced contrast localization cassette. Therefore, simple solutions, such as placing a high atomic number material above the enhanced contrast localization cassette, can reduce this contribution by scattered photons to the signal generated in the cassettes. Conclusions: We have developed a digital cassette that can make more accurate measurements of the technique charts for EC films. Our measurements show that under some conditions, X

Subjective experience of coercion in psychiatric care: a study comparing the attitudes of patients and healthy volunteers towards coercive methods and their justification.

Science.gov (United States)

Mielau, J; Altunbay, J; Gallinat, J; Heinz, A; Bermpohl, F; Lehmann, A; Montag, C

2016-06-01

Under certain conditions, coercive interventions in psychotic patients can help to regain insight and alleviate symptoms, but can also traumatize subjects. This study explored attitudes towards psychiatric coercive interventions in healthy individuals and persons suffering from schizophrenia, schizoaffective or bipolar disorder. The impact of personal history of coercive treatment on preferences concerning clinical management of patients unable to consent was investigated. Six case vignettes depicting scenarios of ethical dilemmas and demanding decisions in favour of or against coercive interventions were presented to 60 healthy volunteers and 90 patients. Structured interviews focusing on experienced coercion were performed in conjunction with the Coercion Experience Scale and the Admission Experience Survey. Symptom severity, psychosocial functioning and insight into illness were assessed as influencing variables. Student's t tests compared patients' and controls' judgments, followed by regression analyses to define the predictive value of symptoms and measures of coercion on judgments regarding the total patient sample and patients with experience of fixation. Patients and non-psychiatric controls showed no significant difference in their attitudes towards involuntary admission and forced medication. Conversely, patients more than controls significantly disapproved of mechanical restraint. Subjective experience of coercive interventions played an important role for the justification of treatment against an individual's "natural will". Factors influencing judgments on coercion were overall functioning and personal experience of treatment effectiveness and fairness. Qualitative and quantitative aspects of perceived coercion, in addition to insight into illness, predicted judgments of previously fixated patients. Results underline the importance of the quality of practical implementation and care, if coercive interventions cannot be avoided.

The EC discourse on vocational training

DEFF Research Database (Denmark)

Cort, Pia

2009-01-01

This article traces the EC vocational training policy historically and describes the discursive alignments which brought the policy from a ‘common vocational training policy' as laid down in Article 128, in the Treaty of Rome to the Lisbon Lifelong Learning strategy. The argument is that vocational...... EC vocational training policy (Ball, What is policy? Texts, trajectories and toolboxes. Discourse, 13(2), 1993)....

Magnetic coercivity and intensity of Mars crust: Dichotomy formation via unicellular convection mechanism

Czech Academy of Sciences Publication Activity Database

Kletetschka, Günther; Acuna, M. H.; Connerney, J. E.; Wasilewski, P. J.; Ness, F. N.

2005-01-01

Roč. 86, č. 52 (2005), GP43A-0884 ISSN 0096-3941. [American Geophysical Union Fall Meeting. 05.12.2005-05.12.2005, San Francisco] Institutional research plan: CEZ:AV0Z30130516 Keywords : magnetic coercivity * magnetic intesity * plate tectonics Subject RIV: BM - Solid Matter Physics ; Magnetism

Finite impulse testing (FIT) system for Emergency Cooling System (ECS) in Dhruva

International Nuclear Information System (INIS)

Punekar, Parag; Ramkumar, N.; Kulkarni, U.S.; Darbhea, M.D.; Bharadhwaj, G; Jangra, L.R.; Geetha, Patil; Das, Shantanu; Sonnis, S.T.; Trevedi, P.; Patil, M.B.; Biswas, B.B.

2006-01-01

Finite Impulse Testing (FIT) system for Emergency Cooling System (ECS) is used to check healthiness of ECS logic circuits in an online mode. The ECS is an important safety system that ensures the cooling of reactor core during shutdown state of Main Coolant Pumps (MCPs), and hence FIT-ECS that monitors the health of ECS logic circuits in an online (real time) mode is an important part of it. Based on a Safety Related Unusual Occurrence in ECS system due to the malfunction of its earlier single channel FIT system, the new FIT-ECS system has been designed with new features and is commissioned. The FIT-ECS system feeds the simulated input signals (fine impulses of nominal width 575 μS) to the ECS logic circuits and read the outputs. These output (predicted) signals from ECS logic circuit are processed in the FIT-ECS system and in event of any discrepancy, the FIT-ECS system displays fault signature on local panel, detailed information of the fault on Operator Console (OC), and generates an alarm 'ECS logic Fail' in the control room. FIT-ECS also monitors the inputs and outputs of ECS logic circuit. All the information required is stored as a database that can be subsequently displayed in various formats. ECS system is designated as Category I-A system and is a hardwired system and FIT-ECS monitors the healthiness of the logics of the ECS System is a computerized system. As per IEC 1226, FIT-ECS is categorized as Category I-B system. This paper provides technical information on FIT-ECS system design, its important features, the testing carried on the FIT-ECS system, interconnections of FIT-ECS and ECS and the commissioning experience of FIT-ECS system. (author)

Magnetic properties and coercivity mechanism of Sm{sub 1-x}Pr{sub x}Co{sub 5} (x=0-0.6) nanoflakes prepared by surfactant-assisted ball milling

Energy Technology Data Exchange (ETDEWEB)

Xu, M. L.; Yue, M., E-mail: yueming@bjut.edu.cn; Wu, Q.; Li, Y. Q.; Lu, Q. M. [College of Materials Science and Engineering, Beijing University of Technology, Beijing 100124 (China)

2016-05-15

Sm{sub 1-x}Pr{sub x}Co{sub 5} (x=0-0.6) nanoflakes with CaCu{sub 5} structure were successfully prepared by surfactant-assisted high-energy ball milling (SAHEBM). The crystal structure and magnetic properties of Sm{sub 1-x}Pr{sub x}Co{sub 5} (x=0-0.6) nanoflakes were studied by X-ray diffraction and vibrating sample magnetometer. Effects of Pr addition on the structure, magnetic properties and coercivity mechanism of Sm{sub 1-x}Pr{sub x}Co{sub 5} nanoflakes were systematically investigated. XRD results show that all the nanoflakes have a hexagonal CaCu{sub 5}-type (Sm, Pr){sub 1}Co{sub 5} main phase and the (Sm, Pr){sub 2}Co{sub 7} impurity phase, and all of the samples exhibit a strong (00l) texture after magnetic alignment. As the Pr content increases, remanence firstly increases, then slightly reduced, while anisotropy field (H{sub A}) and H{sub ci} of decrease monotonically. Maximum energy product [(BH){sub max}] of the flakes increases first, peaks at 24.4 MGOe with Pr content of x = 0.4, then drops again. Magnetization behavior analysis indicate that the coercivity mechanism is mainly controlled by inhomogeneous domain wall pinning, and the pinning strength weakens with the increased Pr content, suggesting the great influence of H{sub A} on the coercivity of flakes.

Successful interventions on an organisational level to reduce violence and coercive interventions in in-patients with adjustment disorders and personality disorders.

Science.gov (United States)

Steinert, Tilman; Eisele, Frank; Goeser, Ulla; Tschoeke, Stefan; Uhlmann, Carmen; Schmid, Peter

2008-11-17

Self-directed and other violence as well as subsequent coercive interventions occur in a substantial proportion of patients with personality disorders during in-patient treatment. Different strategies may be required to reduce coercive interventions for patients of different diagnostic groups. We specialised one of our acute admission wards in the treatment of personality disorders and adjustment disorders (ICD-10 F4 and F6). Patients are not transferred to other acute wards in case of suicidal or violent behaviour. Violent behaviour and coercive interventions such as seclusion or restraint were recorded in the same way as in the rest of the hospital. We recorded the percentage of subjects affected by diagnostic group and average length of an intervention in the year before and after the change in organisational structure. The total number of coercive interventions decreased by 85% both among patients with an F4 and those with an F6 primary diagnosis. Violent behaviours decreased by about 50%, the proportion of involuntary committed patients decreased by 70%. The organisational change turned out to be highly effective without any additional cost of personnel or other resources.

Everyone talk about EC technology - What's about this technology? AC versus AC technology; Alle reden von EC-Technologie - was bringt sie wirklich? AC- versus EC-Motorentechnik

Energy Technology Data Exchange (ETDEWEB)

Anon.

2010-12-15

Meanwhile, the EC motor technology is the state of the art in fans. In the consciousness of a possible energy conservation, the EC motor technology is demanded to a large extent with the new installations of the customers. But how high are the possible savings actually? A comparative measurement at a condenser of Guentner AG (Fuerstenfeldbruck, Federal Republic of Germany) supports information.

Coercivity of Nd-Fe-B hot-deformed magnets produced by the spark plasma sintering method

Directory of Open Access Journals (Sweden)

Tetsuji Saito

2017-05-01

Full Text Available The effects of Nd-Cu alloy powder addition on the microstructures and magnetic properties of Nd-Fe-B hot-deformed magnets produced by the spark plasma sintering (SPS method were investigated. The addition of a small amount of Nd-Cu alloy powder, up to 2%, significantly increased the coercivity of the Nd-Fe-B hot-deformed magnets without deteriorating the crystallographic alignment of the Nd2Fe14B phase. The Nd-Fe-B hot-deformed magnet with 2% Nd-Cu alloy powder had the same remanence value as the Nd-Fe-B hot-deformed magnet without Nd-Cu alloy powder addition, but the magnet with 2% Nd-Cu alloy powder exhibited higher coercivity and a higher maximum energy product than the magnet without Nd-Cu alloy powder addition.

Dependence of the polar Kerr angle and coercivity on repeat distance in sequentially prepared Tb/FeCo films

International Nuclear Information System (INIS)

Shin, S.

1991-01-01

Multilayer thin films of Tb and FeCo were prepared by sequential thermal evaporation of Tb and Fe 90 Co 10 alloy on glass substrates at ambient temperature in a vacuum of about 1 x 10 -6 Torr. The repeat distance of the films was varied from 3.5 to 175 A while maintaining the composition constant for all samples. Low-angle x-ray diffraction and Auger electron spectroscopy showed that a multilayer structure was achieved for films fabricated with a repeat distance Λ≥31.5 A. The polar Kerr rotation angle and coercivity of the samples were obtained by measuring the polar Kerr hysteresis loop using a 632.8-nm HeNe laser. It was observed that for the samples having a multilayer structure, the remnant Kerr angle and coercivity monotonically decreased with increasing repeat distance, and eventually disappeared for Λ≥70 A. For the samples showing a nonmultilayer structure, the remnant Kerr angle was independent of repeat distance. However, the coercivity increased with repeat distance until a broad maximum was obtained around Λ congruent 14--21 A

Local profile dependence of coercivity in (MM0.3Nd0.7)-Fe-B sintered magnets

Science.gov (United States)

Yu, Xiaoqiang; Zhu, Minggang; Liu, Weiqiang; Li, Wei; Sun, Yachao; Shi, Xiaoning; Yue, Ming

2018-03-01

Two magnets with the same nominal composition of (MM0.3Nd0.7)-Fe-B (Marked as A) and [(La0.27Ce0.53Pr0.03Nd0.17)0.3Nd0.7]-Fe-B (Marked as B) were prepared using traditional powder metallurgical process, respectively. In order to point out the difference between two magnets, the magnetic properties, microstructure and magnetic domain of both magnets were investigated. Both magnets have the same elements, but different raw materials of misch-metal (MM) and La/Ce/Pr/Nd pure metal, which induces different magnetic properties. The magnet A with Br of 13.1 kGs, Hcj of 7.6 kOe, (BH)max of 37.8 MGOe and magnet B with Br of 13.4 kGs, Hcj of 5.8 kOe, (BH)max of 34.5 MGOe are obtained. Although both magnets have the similar Br, magnet A has higher coercivity than that of magnet B. According to refined results of characteristic X-ray diffraction peaks, there is a hard magnetic main phase with higher magnetic anisotropy field (HA) in magnet A and opposite case happens on magnet B. SEM images demonstrate that magnet A has more continuous RE-rich phase and smaller grain size compared to that of magnet B, which contributes to enhancing the coercivity. In addition, two main phases of [Nd0.82(La, Ce)0.18]-Fe-B and [Nd0.75(La, Ce)0.25]-Fe-B were detected by the EDX calculation, and the two main phases in both magnets were observed by magnetic domains again. Compared to magnet B, 2:14:1 main phases in magnet A contain more [Nd0.82(La, Ce)0.18]-Fe-B main phases and less [Nd0.75(La, Ce)0.25]-Fe-B main phases, which also leads to higher coercivity due to the different HA among Nd2Fe14B, La2Fe14B and Ce2Fe14B phases. Therefore, it is concluded that MM substitution could exhibit better magnetic properties than (La0.27Ce0.53Pr0.03Nd0.17)-metal substitution. Furthermore, applications of MM are beneficial to fabricate (MM, Nd)-Fe-B permanent magnets with lower cost.

The coercive force of fine particles of monoclinic pyrrhotite (Fe7S8 ...

African Journals Online (AJOL)

The temperature dependence of coercive force (Hc) between 77 K and 600 K has been investigated for fine particles of monoclinic pyrrhotite (Fe7S8) of < 1 mm and 1- 30 mm particle sizes. The study has shown that Hc is strongly dependent on temperature, as temperature rises above room temperature (293 K) to near the ...

Coercive Tactics and Web Advertising Performance

Directory of Open Access Journals (Sweden)

Jiwon Lee

2017-07-01

Full Text Available By questioning contemporary coercive or intrusive web advertising activities, this study sheds light on the recent conditions of web advertising by focusing on a comprehensive process that leads to web ad performance. A total of 400 questionnaires were distributed by the principal investigators of this study. 170 were returned from 200 distributed questionnaires given in South Korea and 100 were returned from 200 distributed questionnaires in China. The responses total 248 out of 400 distributed questionnaires. The relationships among the measured factors are analyzed by the structural equation modeling method. Results show that the use of web ad tactics often leads to negative consequences, creating a user present avoidance behavior condition towards both the ad and ad-hosting website. In terms of the performance of the ad-hosting website, website retention was strongly influenced by content blocking. In addition, the results of the comparative test suggest that the influence of avoidance on advertising performance is stronger among users of newspaper websites than e-commerce websites.

Which patients are in highest risk of coercive measures after admission to a general psychiatric ward?

DEFF Research Database (Denmark)

Højlund, Mikkel; Høgh, Lene; Nørregaard, Anne-Mette

2017-01-01

Background Coercive measures, especially mechanical restraint, are more frequently applied to some patients in general psychiatry. In order to tailor an intervention to reduce mechanical restraint we sought to create an evidence base speci c to our population in general psychiatry. Aims To identi...... is currently being tested at the Department of Psychiatry in Aabenraa, Denmark and has until now lead to a decrease in episodes with mechanical restraint from 18 in 2015 to 9 in 2016, and only 1 episode in the rst half of 2017.......Background Coercive measures, especially mechanical restraint, are more frequently applied to some patients in general psychiatry. In order to tailor an intervention to reduce mechanical restraint we sought to create an evidence base speci c to our population in general psychiatry. Aims To identify...

A generalized view of self-citation: direct, co-author, collaborative, and coercive induced self-citation.

Science.gov (United States)

Ioannidis, John P A

2015-01-01

The phenomenon of self-citation can present in many different forms, including direct, co-author, collaborative, and coercive induced self-citation. It can also pertain to the citation of single scientists, groups of scientists, journals, and institutions. This article presents some case studies of extreme self-citation practices. It also discusses the implications of different types of self-citation. Self-citation is not necessarily inappropriate by default. In fact, usually it is fully appropriate but often it is even necessary. Conversely, inappropriate self-citation practices may be highly misleading and may distort the scientific literature. Coercive induced self-citation is the most difficult to discover. Coercive Induced self-citation may happen directly from reviewers of articles, but also indirectly from reviewers of grants, scientific advisors who steer a research agenda, and leaders of funding agencies who may espouse spending disproportionately large funds in research domains that perpetuate their own self-legacy. Inappropriate self-citation can be only a surrogate marker of what might be much greater distortions of the scientific corpus towards conformity to specific opinions and biases. Inappropriate self-citations eventually affect also impact metrics. Different impact metrics vary in the extent to which they can be gamed through self-citation practices. Citation indices that are more gaming-proof are available and should be more widely used. We need more empirical studies to dissect the impact of different types of inappropriate self-citation and to examine the effectiveness of interventions to limit them. Copyright © 2014. Published by Elsevier Inc.

Thermal effect on magnetic parameters of high-coercivity cobalt ferrite

Energy Technology Data Exchange (ETDEWEB)

Chagas, E. F., E-mail: efchagas@fisica.ufmt.br; Ponce, A. S.; Prado, R. J.; Silva, G. M. [Instituto de Física, Universidade Federal de Mato Grosso, 78060-900 Cuiabá-MT (Brazil); Bettini, J. [Laboratório Nacional de Nanotecnologia, Centro Nacional de Pesquisa em Energia e Materiais, 13083-970 Campinas (Brazil); Baggio-Saitovitch, E. [Centro Brasileiro de Pesquisas Físicas, Rua Xavier Sigaud 150 Urca. Rio de Janeiro (Brazil)

2014-07-21

We prepared very high-coercivity cobalt ferrite nanoparticles synthesized by a combustion method and using short-time high-energy mechanical milling to increase strain and the structural defects density. The coercivity (H{sub C}) of the milled sample reached 3.75 kOe—a value almost five times higher than that obtained for the non-milled material (0.76 kOe). To investigate the effect of the temperature on the magnetic behavior of the milled sample, we performed a thermal treatment on the milled sample at 300, 400, and 600 °C for 30 and 180 min. We analyzed the changes in the magnetic behavior of the nanoparticles due to the thermal treatment using the hysteresis curves, Williamson-Hall analysis, and transmission electron microscopy. The thermal treatment at 600 °C causes decreases in the microstructural strain and density of structural defects resulting in a significant decrease in H{sub C}. Furthermore, this thermal treatment increases the size of the nanoparticles and, as a consequence, there is a substantial increase in the saturation magnetization (M{sub S}). The H{sub C} of the samples treated at 600 °C for 30 and 180 min were 2.24 and 1.93 kOe, respectively, and the M{sub S} of these same samples increased from 57 emu/g to 66 and 70 emu/g, respectively. The H{sub C} and the M{sub S} are less affected by the thermal treatment at 300 and 400 °C.

Review and Perspectives of Aurivillius Structures as a Lead-Free Piezoelectric System

Directory of Open Access Journals (Sweden)

Alberto Moure

2018-01-01

Full Text Available According to the EU-Directives 2002/95/EC, 2002/96/EC, lead-based piezoceramics must be substituted in the future with more environmentally friendly alternatives, only when a reliable alternative is found. This is why an increasing interest has grown in the research community to find lead free piezoelectric materials that fulfil the requirements for this substitution. Different families of compounds have been shown to be possible candidates for this use, such as bismuth and niobates based perovskites, pyrochlores, etc. However, a material with piezoelectric coefficients similar to those of PZT (lead zirconate titanate, Pb[ZrxTi1-x]O3 has not been yet found. Besides, each of these families has its specific characteristics in terms of remnant polarization, coercive field or application temperature. Thus, the choice of each material should be made according to the specific needs of the application. In this sense, Aurivillius-type structure materials (also known as Bismuth Layered Structure Ferroelectrics, BLSF can take advantage of their specific properties for uses as Lead Free Piezoelectric systems. Some of them have a high Curie temperature, which make them good candidates to be used as high temperature piezoelectrics; high coercive fields, which facilitates their use as actuators; or a high switching fatigue resistance, which can be useful for future applications as Ferroelectric Random Access Memories (FERAM.

On the isolation of elemental carbon (EC) for micro-molar 14C accelerator mass spectrometry: development of a hybrid reference material for 14C-EC accuracy assurance, and a critical evaluation of the thermal optical kinetic (TOK) EC isolation procedure

Science.gov (United States)

Currie, L. A.; Kessler, J. D.

2005-10-01

The primary objective of the research reported here has been the development of a hybrid reference material (RM) to serve as a test of accuracy for elemental carbon (EC) isotopic (14C) speciation measurements. Such measurements are vital for the quantitative apportionment of fossil and biomass sources of "soot" (EC), the tracer of fire that has profound effects on health, atmospheric visibility, and climate. Previous studies of 14C-EC measurement quality, carried out with NIST SRM 1649a (Urban Dust), showed a range of results, but since the "truth" was not known for this natural matrix RM, one had to rely on isotopic-chemical consistency evidence (14C in PAH, EC) of measurement validity (Currie et al., 2002). Components of the new Hybrid RM (DiesApple), however, have known 14C and EC composition, and they are nearly orthogonal (isotopically and chemically). NIST SRM 2975 (Forklift Diesel Soot) has little or no 14C, and its major compositional component is EC; SRM 1515 (Apple Leaves) has the 14C content of biomass-C, and it has little or no EC. Thus, the Hybrid RM can serve as an absolute isotopic test for the absence of EC-mimicking pyrolysis-C (char) from SRM 1515 in the EC isolate of the Hybrid RM, as well as a test for conservation of its dominant soot fraction throughout the isolation procedure. The secondary objective was to employ the Hybrid RM for the comparative evaluation of the thermal optical kinetic (TOK) and thermal optical transmission (TOT) methods for the isolation of EC for micro-molar carbon accelerator mass spectrometry (AMS). As part of this process, the relatively new TOK method was subjected to a critical evaluation and significant development. Key findings of our study are: (1) both methods exhibited biomass-C "leakage"; for TOT, the EC fraction isolated for AMS contained about 8% of the original biomass-C; for TOK, the refractory carbon (RC) isolated contained about 3% of the original biomass-C.; (2) the initial isothermal oxidation stage of

On the isolation of elemental carbon (EC for micro-molar 14C accelerator mass spectrometry: development of a hybrid reference material for 14C-EC accuracy assurance, and a critical evaluation of the thermal optical kinetic (TOK EC isolation procedure

Directory of Open Access Journals (Sweden)

L. A. Currie

2005-01-01

Full Text Available The primary objective of the research reported here has been the development of a hybrid reference material (RM to serve as a test of accuracy for elemental carbon (EC isotopic (14C speciation measurements. Such measurements are vital for the quantitative apportionment of fossil and biomass sources of 'soot' (EC, the tracer of fire that has profound effects on health, atmospheric visibility, and climate. Previous studies of 14C-EC measurement quality, carried out with NIST SRM 1649a (Urban Dust, showed a range of results, but since the 'truth' was not known for this natural matrix RM, one had to rely on isotopic-chemical consistency evidence (14C in PAH, EC of measurement validity (Currie et al., 2002. Components of the new Hybrid RM (DiesApple, however, have known 14C and EC composition, and they are nearly orthogonal (isotopically and chemically. NIST SRM 2975 (Forklift Diesel Soot has little or no 14C, and its major compositional component is EC; SRM 1515 (Apple Leaves has the 14C content of biomass-C, and it has little or no EC. Thus, the Hybrid RM can serve as an absolute isotopic test for the absence of EC-mimicking pyrolysis-C (char from SRM 1515 in the EC isolate of the Hybrid RM, as well as a test for conservation of its dominant soot fraction throughout the isolation procedure. The secondary objective was to employ the Hybrid RM for the comparative evaluation of the thermal optical kinetic (TOK and thermal optical transmission (TOT methods for the isolation of EC for micro-molar carbon accelerator mass spectrometry (AMS. As part of this process, the relatively new TOK method was subjected to a critical evaluation and significant development. Key findings of our study are: (1 both methods exhibited biomass-C 'leakage'; for TOT, the EC fraction isolated for AMS contained about 8% of the original biomass-C; for TOK, the refractory carbon (RC isolated contained about 3% of the original biomass-C.; (2 the initial isothermal oxidation stage

Achievements & bottlenecks in humanitarian demining EU-funded research: Final results from the EC DELVE project

NARCIS (Netherlands)

Sahli, H.; Bruschini, C.; Kempen, L. van; Schleijpen, H.M.A.; Breejen, E. den

2008-01-01

The EC DELVE Support Action project has analyzed the bottlenecks in the transfer of Humanitarian Demining (HD) technology from technology development to the use in the field, and drawn some lessons learned, basing itself on the assessment of the European Humanitarian Demining Research and Technology

The planned EC Directive on 'Integrated Pollution Prevention and Control' (IPC)

International Nuclear Information System (INIS)

Sellner, D.; Schnutenhaus, J.

1993-01-01

This EC Directive is intended to incorporate integrated pollution control as a mandatory obligation in the legal provisions governing industrial installations licensing within the EC. The article in hand presents an assessment of the Directive and discusses some possible impacts on the German national law in the field of pollution control, which hitherto has been defined on the basis of a preferably medium-oriented approach. A serious point of deviation from the German approach is seen in the fact that the draft's provisions relating to the licensing of industrial installations defines certain pre-conditions allowing a plant in a low-polluted area to be licensed, although the pollution control systems of the plant do not them come up to the state-of-the-art in pollution abatement technology. This is seen as a fact jeopardizing the principle of precantionary measures which has been firmly established in German pollution control law. (orig./HP) [de

Enhancement of coercivity with reduced grain size in CoCrPt film grown by pulsed laser deposition

International Nuclear Information System (INIS)

Liang, Q.; Hu, X.F.; Li, H.Q.; He, X.X.; Wang, Xiaoru; Zhang, W.

2006-01-01

We report a pulsed laser deposition (PLD) growth of VMn/CoCrPt bilayer with a magnetic coercivity (H c ) of 2.2 kOe and a grain size of 12 nm. The effects of VMn underlayer on magnetic properties of CoCrPt layer were studied. The coercivity, H c , and squareness, S, of VMn/CoCrPt bilayer, is dependent on the thickness of VMn. The grain size of the CoCrPt film can also be modified by laser parameters. High laser fluence used for CoCrPt deposition produces a smaller grain size. Enhanced H c and reduced grain size in VMn/CoCrPt is explained by more pronounced surface phase segregation during deposition at high laser fluence

Coercivity enhancement in hot deformed Nd2Fe14B-type magnets by doping low-melting RCu alloys (R = Nd, Dy, Nd + Dy)

Science.gov (United States)

Lee, Y. I.; Huang, G. Y.; Shih, C. W.; Chang, W. C.; Chang, H. W.; You, J. S.

2017-10-01

Magnetic properties of the anisotropic NdFeB magnets prepared by hot pressing followed by die-upsetting NdFeB MQU-F powders doped with low-melting RCu alloy powders were explored, where RCu stands for Nd70Cu30, Dy70Cu30 and (Nd0.5Dy0.5)70Cu30, respectively. In addition, the post-annealing at 600 °C was employed to modify the microstructures and the magnetic properties of the hot deformed magnets. It is found that doping RCu alloy powders is effective in enhancing the coercivity of the hot deformed NdFeB magnets from 15.1 kOe to 16.3-19.5 kOe. For Nd70Cu30-doped magnets, the increment of coercivity is only 1.2 kOe. Meanwhile, Dy70Cu30-doped and (Nd0.5Dy0.5)70Cu30-doped magnets show an almost identical enhancement of coercivity of about 4.4 kOe. Importantly, the latter magnet shows a beneficial effect of reducing the usage of Dy from 1.6 wt% to 0.8 wt%. TEM analysis shows that nonmagnetic Nd, Dy and Cu appear at grain boundary and isolate the magnetic grains, leading to an enhancement of coercivity. Doping lower melting point Dy-lean (Nd0.5Dy0.5)70Cu30 powders into commercial MQU-F powders for making high coercivity hot deformed NdFeB magnets might be a potential and economic way for mass production.

High coercivity microcrystalline Nd-rich Nd–Fe–Co–Al–B bulk magnets prepared by direct copper mold casting

Energy Technology Data Exchange (ETDEWEB)

Zhao, L.Z.; Hong, Y. [School of Materials Science and Engineering, South China University of Technology, Guangzhou 510640 (China); Fang, X.G. [Institute for Advanced Materials and Laboratory of Quantum Engineering and Quantum Materials, South China Normal University, Guangzhou 510640 (China); Qiu, Z.G.; Zhong, X.C. [School of Materials Science and Engineering, South China University of Technology, Guangzhou 510640 (China); Gao, X.S. [Institute for Advanced Materials and Laboratory of Quantum Engineering and Quantum Materials, South China Normal University, Guangzhou 510640 (China); Liu, Z.W., E-mail: zwliu@scut.edu.cn [School of Materials Science and Engineering, South China University of Technology, Guangzhou 510640 (China)

2016-06-15

High coercivity Nd{sub 25}Fe{sub 40}Co{sub 20}Al{sub 15−x}B{sub x} (x=7–15) hard magnets were prepared by a simple process of injection casting. Different from many previous investigations on nanocomposite compositions, the magnets in this work contain hard magnetic Nd{sub 2}(FeCoAl){sub 14}B, Nd-rich, and Nd{sub 1+ε}(FeCo){sub 4}B{sub 4} phases. The magnetic properties, phase evolution, and microstructure of the as-cast and annealed magnets were investigated. As the boron content increased from 7 to 11 at%, the intrinsic coercivity H{sub cj} of the as-cast magnet increased from 816 to 1140 kA/m. The magnets annealed at 750 °C have shown more regular and smaller grains than the as-cast alloys, especially for the x=11 alloy. The high intrinsic coercivities for the annealed alloys with x=8~11 result from the presence of small-sized grains in the microstructure. The highest H{sub cj} of 1427 kA/m was obtained for the heat treated alloy with x=10. This work provides an alternative approach for preparing fully dense Nd-rich bulk hard magnets with relatively good properties. - Highlights: • 2 mm hard magnetic Nd{sub 25}Fe{sub 40}Co{sub 20}Al{sub 15−x}B{sub x} rods were prepared by direct casting. • High coercivity of 1.78 T was achieved in x=11 sample after heat treatment. • Small grains are responsible for the significant increase in H{sub C} after annealing. • Nd{sub 2}Fe{sub 14}B grains with two different sizes lead to two-step demagnetization process.

Study of high coercive force films made by vacuum deposition of cobalt onto chromium

International Nuclear Information System (INIS)

Randet, Denis

1969-01-01

A new method to make high coercive force films, by successive evaporations of chromium and cobalt, was demonstrated in 1966 at the 'Laboratoire d'Electronique et de Technologie de l'Informatique'. This work first contains a description of the magnetic properties of these films according to the conditions of preparation. These properties, which are isotropic in the plane of the film, are then related to the crystallographic structure of chromium and cobalt, in particular through electron microscopy. It is concluded that the coercive force is essentially due to the high magneto-crystalline anisotropy of cobalt in its hexagonal phase and depends, altogether with the shape of the hysteresis loop, on the magnetostatic coupling between the grains, which varies according to their dimensions. The chromium underlayer, if its surface is free enough of oxygen contamination, induces the growth of the hexagonal phase and influences the grain size of cobalt by a sort of epitaxy. At last, the behaviour of the Co/Cr films as a magnetic recording material is briefly examined and discussed. (author) [fr

Special Issue: Selected papers from ECS'97

DEFF Research Database (Denmark)

1999-01-01

This Special Issue of Analog Integrated Circuits and Signal Processing presents extended versions of selected papers from the First Electronic Circuits and Systems Conference (ECS'97) which was held on September 4-5, 1997, in Bratislava, Slovakia.......This Special Issue of Analog Integrated Circuits and Signal Processing presents extended versions of selected papers from the First Electronic Circuits and Systems Conference (ECS'97) which was held on September 4-5, 1997, in Bratislava, Slovakia....

Cross-sectional study on nurses' attitudes regarding coercive measures: the importance of socio-demographic characteristics, job satisfaction, and strategies for coping with stress.

Science.gov (United States)

Bregar, Branko; Skela-Savič, Brigita; Kores Plesničar, Blanka

2018-06-04

Coercive measures are containment methods used in psychiatry to curb patients' disruptive and aggressive behaviours towards themselves, others or objects. The prevalence of the practice of coercive measures in psychiatry is directly related to the attitudes of the staff. When discussing these attitudes, nurses are often particularly singled out. The purpose of the study is to research the impact of individual factors on nurses' attitudes in the decision-making process for the use of coercive measures. A cross-sectional study among all psychiatric nursing staff in Slovenia (n = 367, 79%) was conducted over the years 2013/2014. Standardized questionnaires were used, including a survey of nurses' attitudes to the use of seclusion, the Job Descriptive Index, and the Folkman-Lazarus test. Nurses' attitudes towards special coercive measures are predominantly negative ([Formula: see text] = 11.312, SD = 2.641). The factors that explain a positive attitude are as follows: female gender (β = - 0.236, p <  0.001), fewer years of service (β = - 0.149, p = 0.023), emotion-focused strategies of coping with stress (β = 0.139, p = 0.020), and less-threatening patient behaviour (β = 0.157, p = 0.012). The effects of some known factors did not prove important in the model. Newly recognized factors are "less-threatening patient behaviour" and "emotion-focused strategies of coping with stress". Therefore, attitudes towards special coercive measures in psychiatry must be regarded as contextualized, interactive, and multidimensional phenomena that cannot be explained merely through a defined set of factors.

EC6 design features and pre-project licensing review

Energy Technology Data Exchange (ETDEWEB)

Yu, S.; Lee, A.G.; Dinh, N.B.; Soulard, M. [CANDU Energy Inc., Mississauga, Ontario, (Canada)

2013-07-01

The Enhanced CANDU 6 (EC6) is the new Generation III CANDU reactor design that meets the most up to date Canadian regulatory requirements and customer expectations. Candu Energy Inc. is finalizing development of the EC6 which incorporates the CANDU 6's well-proven features, and adds enhancements that strengthened reactor safety margin and improved operability. The EC6 builds on the proven high performance design and the defence-in-depth features of CANDU 6 units, and has incorporated extensive operational feedback including lessons learned from Fukushima. This paper will provide status of the engineering program including progress on the pre-licensing review of the EC6 design by the Canadian Regulator, CNSC, and will also highlight the design and safety enhancements incorporated in the EC6 product. Safety enhancements to meet safety goals and to improve robustness of systems to respond to design basis accidents and beyond design basis accidents include: new severe accident recovery and heat removal system; improved emergency heat removal system; faster shutoff rods with improved safety margins; mechanical guaranteed shutdown rods; daily load cycling capability; robust containment with containment filter venting system; and improved backed-up electrical supply and cooling services. (author)

Feasibility study of electrophoresis deposition of DyF3 on Nd-Fe-B particles for coercivity enhancement

Science.gov (United States)

Kim, K. M.; Kang, M. S.; Kwon, H. W.; Lee, J. G.; Yu, J. H.

2018-05-01

Feasibility of the electrophoresis deposition (EPD) technique for homogeneous and adhesive deposition of DyF3 particles on the Nd-Fe-B-type particles was studied, and coercivity enhancement in the diffusion-treated Nd-Fe-B-type particles deposited with DyF3 by EPD was investigated. HDDR-treated Nd12.5Fe80.6B6.4Ga0.3Nb0.2 particles were deposited with DyF3 particles by EPD. More homogeneous and adhesive deposition of DyF3 particles on the surface of Nd-Fe-B particles was made by the EPD with respect to conventional dip-coating, and this led to more active and homogeneous diffusion of Dy. More profound coercivity enhancement was achieved in the diffusion-treated Nd-Fe-B-type particles deposited with DyF3 by EPD compared to dip-coated particles.

Do Decision 2003/54/EC and Decision no. 1229/2003/EC result in a European market for electricity?

International Nuclear Information System (INIS)

Wenting, F.

2004-01-01

In the summer of 2003 the European Parliament and the European Council issued a new Directive with respect to the internal market for electricity (Directive 2003/54/EC of the European Parliament and of the Council of 26 June 2003 concerning common rules for the internal market in electricity) and Guidelines for trans-European networks in the energy sector (Decision no. 1229/2003/EC). The question is whether these decisions will lead to a European and free market for electricity. It is concluded that this is not yet the case [nl

Activities of the Sofia EC Energy Center in the framework of the THERMIE programme

International Nuclear Information System (INIS)

Latinski, K.

1993-01-01

The European Community Energy Center in Sofia is responsible for the EC implementation of the THERMIE programme. The programme's activities are promotion and dissemination of existing European technologies leading to better energy management and covering the fields of rational use of hydrocarbons, solid fuels and renewable energy sources. Application of these technologies would lead to substantial energy savings resulting in significant financial and environmental benefits. During its one-year operation the EC Energy Centre has organized and performed specific action as energy audits (food and beverage industrial units and buildings), demonstration projects (local heating control in buildings, diesel engine regulation of buses), training courses and seminars (in energy management and in space heating measuring and regulation), workshops (energy conservation in buildings, the bricks and clays sector and the food and beverage sector) and studies (wind energy potential, 'clean' coal technologies potential). Some of these actions have had very encouraging results showing potential energy savings of the order of 10-20% just by application of simple measures and with small additional investment. The activities of the EC Energy Centre in the coming year aimed at electricity savings along the entire line of electricity generation, transmission and consumption are outlined. (author)

COERCIVITY AND VECTOR MAGNETIZATION ANALYSIS OF OBSIDIAN SAMPLES FROM THE TRANS-MEXICAN VOLCANIC BELT (Coercitividad y análisis de magnetización vectorial de muestras de obsidianas de la faja volcánica transmexicana

Directory of Open Access Journals (Sweden)

Jaime Urrutia-Fucugauchi

2017-09-01

Full Text Available This note presents initial results of a paleomagnetic study of obsidian from twenty localities in the eastern, central and western sectors of the Trans-Mexican volcanic belt in central Mexico. We focus on the coercivity and vector composition of the remanent magnetization, which are critical for paleodirectional and paleointensity studies. Alternating field demagnetization shows that obsidians carry single and two-component magnetizations residing in low- and high-coercivity magnetic minerals, with discrete and overlapping coercivity spectra. Magnetic minerals are likely iron-titanium oxides with fine-grain sizes characterized by pseudo-single domain states. ESPAÑOL: Se presentan los resultados preliminares del estudio de obsidianas de veinte localidades en los sectores este, central y oeste de la faja volcánica transmexicana. Los análisis se concentran en la coercitividad y la composición vectorial de la magnetización remanente, que son propiedades claves para evaluar los registros de direcciones e intensidades. La desmagnetización por campos alternos revela la presencia de magnetizaciones de una y dos componentes, que residen en minerales con baja y alta coercitividad con espectros que traslapan y discretos. Los minerales magnéticos son óxidos de hierro-titanio con grano fino y estados de dominio seudosencillo.

Seizure threshold to lidocaine is decreased following repeated ECS (electroconvulsive shock)

DEFF Research Database (Denmark)

Kragh, J; Seidelin, J; Bolwig, T G

1993-01-01

Seizure susceptibility to lidocaine was investigated in rats which had received repeated ECS (electroconvulsive shock). In the first experiment three groups of rats received an ECS daily for 18 days, an ECS weekly for 18 weeks, and 18 sham treatments, respectively. Twelve weeks after the last ECS...... all rats received a lidocaine challenge (LC) in the form of an intraperitoneal (IP) injection of lidocaine (65 mg/kg). After the injection the animals were observed for occurrence of motor seizures. A total of 67% (10/15), 47% (7/15), and 0% (0/18) of the daily, weekly, and sham groups, respectively......, had motor seizures in response to the LC. In the second experiment five groups of rats received an ECS daily for 0, 1, 6, 18, and 36 days, respectively. Eighteen weeks after the last ECS all rats received an LC and 0% (0/15), 13% (2/15), 20% (3/15), 53% (8/15), and 58% (7/12), respectively, developed...

Ketone EC50 values in the Microtox test.

Science.gov (United States)

Chen, H F; Hee, S S

1995-03-01

The Microtox EC50 values for the following ketones are reported in the following homologous series: straight chain methyl ketones (acetone, 2-butanone, 2-pentanone, 2-hepatonone, 2-octanone, 2-decanone, and 2-tridecanone); methyl ketones substituted at one alpha carbon (3-methyl-2-butanone; 3,3-dimethyl-2-butanone); methyl substituted at two alpha carbons (2,4-dimethyl-3-pentanone; 2,2,4,4-tetramethyl-3-pentanone); phenyl groups replacing methyl in acetone (acetophenone; benzophenone); methyl groups substituted at the alpha carbons of cyclohexanone; and 2,3- 2,4-, and 2,5-hexanediones, most for the first time. While there were linear relationships between log EC50 and MW for the straight chain methyl ketones, and for methyl substitution at the alpha carbon for methyl ketones, there were no other linear relationships. As molecular weight increased, the EC50 values of soluble ketones decreased; as distance between two carbonyl groups decreased so too did EC50 values. Thus, for the ketones the geometry around the carbonyl group is an important determinant of toxicity as well as MW, water solubility, and octanol/water coefficient.

The Impact of Coercive Migrations on the Changes of Total Population Flux in the War-Engulfed Croatian Counties

Directory of Open Access Journals (Sweden)

Ana Pažanin

2006-01-01

Full Text Available The author deals with the war impact and the impact of coercive migrations on the changes of total population fl ux between two censuses. On the eve of and during the Croatian War of Independence, the migration of population of the Republic of Croatia from the war-engulfed areas to the free areas of the country or to the foreign countries increased. The war in Bosnia and Herzegovina has caused a new wave of refugees from that country and a further migrational fl ux in our country. In the article, the author has established, on the case of the war-engulfed areas of eleven Croatian counties, that the war and coercive migrations have caused a decline of population, the growth of aged population, as well as changes in national and confessional structure.

Nuclear power plant performance in the EC in 1978

International Nuclear Information System (INIS)

Anon.

1979-01-01

According to the report presented by the Statistical Office of the Ec, nuclear electricity generation in the nine EC countries has been increased in 1978 by 11% to a net value of 115 TWh as compared to the year before. Installed capacity went up by 18.6% to a net value of 24. 000 MWe at the end of the year. The mean availability period has been close to the hitherto best value of 6000 h/a. The share of nuclear energy in total electricity generation in the EC rose by 0.5% to 10.5%. (orig.) [de

Magnetic viscosity, susceptibility and fluctuation fields in sintered NdFeB

International Nuclear Information System (INIS)

Tomka, G.J.; Bissell, P.R.; O'Grady, K.; Chantrell, R.W.

1990-01-01

Magnetic viscosity and irreversible susceptibility of a sample of anisotropic sintered NdFeB have been measured using a vibrating sample magnetometer. The fluctuation field as a function of local field is found to decrease with increasing demagnetizing field with a dip at the coercivity. This behavior is compared with an existing computer model based on a non-interacting system of fine, uniaxial, randomly oriented particles

Development of novel antibacterial active, HaCaT biocompatible and biodegradable CA-g-P(3HB-EC biocomposites with caffeic acid as a functional entity

Directory of Open Access Journals (Sweden)

H. M. N. Iqbal

2015-09-01

Full Text Available We have developed novel composites by grafting caffeic acid (CA onto the P(3HB-EC based material and laccase from Trametes versicolor was used for grafting purposes. The resulting composites were designated as CA-g-P(3HB-EC i.e., P(3HB-EC (control, 5CA-g-P(3HB-EC, 10CA-g-P(3HB-EC, 15CA-g-P(3HB-EC and 20CA-g-P(3HB-EC. FT-IR (Fourier-transform infrared spectroscopy was used to examine the functional and elemental groups of the control and laccase-assisted graft composites. Evidently, 15CA-g-P(3HB-EC composite exhibited resilient antibacterial activity against Gram-positive and Gram-negative bacterial strains. Moreover, a significant level of biocompatibility and biodegradability of the CA-g-P(3HB-EC composites was also achieved with the human keratinocytes-like HaCaT cells and soil burial evaluation, respectively. In conclusion, the newly developed novel composites with multi characteristics could well represent the new wave of biomaterials for medical applications, and more specifically have promising future in the infection free would dressings, burn and/or skin regeneration field due to their sophisticated characteristics.

Feasibility study of electrophoresis deposition of DyF3 on Nd-Fe-B particles for coercivity enhancement

Directory of Open Access Journals (Sweden)

K. M. Kim

2018-05-01

Full Text Available Feasibility of the electrophoresis deposition (EPD technique for homogeneous and adhesive deposition of DyF3 particles on the Nd-Fe-B-type particles was studied, and coercivity enhancement in the diffusion-treated Nd-Fe-B-type particles deposited with DyF3 by EPD was investigated. HDDR-treated Nd12.5Fe80.6B6.4Ga0.3Nb0.2 particles were deposited with DyF3 particles by EPD. More homogeneous and adhesive deposition of DyF3 particles on the surface of Nd-Fe-B particles was made by the EPD with respect to conventional dip-coating, and this led to more active and homogeneous diffusion of Dy. More profound coercivity enhancement was achieved in the diffusion-treated Nd-Fe-B-type particles deposited with DyF3 by EPD compared to dip-coated particles.

Impact of parental emotional support and coercive control on adolescents' self-esteem and psychological distress: results of a four-year longitudinal study.

Science.gov (United States)

Boudreault-Bouchard, Anne-Marie; Dion, Jacinthe; Hains, Jennifer; Vandermeerschen, Jill; Laberge, Luc; Perron, Michel

2013-08-01

This study aims at investigating the impact of parental practices on youths' adjustment. In all, 605 adolescents completed questionnaires at ages 14, 16 and 18. Self-esteem, psychological distress as well as parental emotional support and coercive control were measured. Analyses based on individual growth models revealed that self-esteem increased with age, but psychological distress remained stable over time. Boys reported higher levels of self-esteem and lower levels of psychological distress than girls. Maternal and paternal emotional support reinforced self-esteem over time. Maternal coercive control undermined self-esteem, but only at ages 16 and 18. Psychological distress decreased with parental emotional support but increased with parental coercive control at ages 14, 16 and 18. Overall, these results indicate that positive parental practices are related to youths' well-being. These findings support the importance of establishing intervention strategies designed to promote best practices among parents of teenagers to help them develop into well-adjusted adults. Copyright © 2013 The Foundation for Professionals in Services for Adolescents. Published by Elsevier Ltd. All rights reserved.

Crossing the Threshold From Porn Use to Porn Problem: Frequency and Modality of Porn Use as Predictors of Sexually Coercive Behaviors.

Science.gov (United States)

Marshall, Ethan A; Miller, Holly A; Bouffard, Jeff A

2017-11-01

According to recent statistics, as many as one in five female college students are victims of sexual assault during their college career. To combat what has been called the "Campus Rape Crisis," researchers have attempted to understand what variables are associated with sexually coercive behaviors in college males. Although investigators have found support for the relationship between pornography consumption and sexually coercive behavior, researchers typically operationalize pornography use in terms of frequency of use. Furthermore, frequency of use has been assessed vaguely and inconsistently. The current study offered a more concrete assessment of frequency of use and an additional variable not yet included for pornography use: number of modalities. Beyond examining the relationship between pornography use and sexual coercion likelihood, the current study was the first to use pornography variables in a threshold analysis to test whether there is a cut point that is predictive of sexual coercion likelihood. Analyses were conducted with a sample of 463 college males. Results indicated that both pornography use variables were significantly related to a higher likelihood of sexually coercive behaviors. When both frequency of use and number of modalities were included in the model, modalities were significant and frequency was not. In addition, significant thresholds for both pornography variables that predicted sexual coercion likelihood were identified. These results imply that factors other than frequency of use, such as number of modalities, may be more important for the prediction of sexual coercive behaviors. Furthermore, threshold analyses revealed the most significant increase in risk occurred between one modality and two, indicating that it is not pornography use in general that is related to sexual coercion likelihood, but rather, specific aspects of pornography use.

and alanine (EC. 2.6.1.2) transaminases, and alkaline phosphatase

African Journals Online (AJOL)

The activities of aspartate (E.C. 2.6.1.1) and alanine (E.C. 2.6.1.2) transaminases (AST and ALT, respectively), and alkaline phosphatase (ALP) (E.C. 3.1.3.1) were determined in erythrocytes obtained from 20 HbAA, 15 HbAS and 12 HbSS human subjects. The results showed that the three enzymes had different levels of ...

Meaning production about an absent image: towards Lula’s coercive conduction in the scope of Operation Lava-Jato

Directory of Open Access Journals (Sweden)

Janaina Cardoso Brum

2017-11-01

Full Text Available In March 2016, the former president Lula was conducted through a coercive way by the Federal Police in order to depose about his involvement in suspect activities related to Operation Lava Jato. The shooting or any other register of this coercive conduction have been forbidden, thus the national media began to work in the verge of this “denied image”. In this paper, we investigate the process of meaning production about this “absent image” through other images and materialities that circulate in the media discourse game regarding the destabilization/ stabilization of evidence about the March fourth current events. Therefore, the concept of lack, excess and strangeness, established by Ernst, were fundamental. We started with the hypothesis that, answering the lack of imagetic register, it was established a profusion of other imagetic, audiovisual and/or verbal discourses.

Cognitive Targeting: A Coercive Air Power Theory for Conventional Escalation Control Against Nuclear Armed Adversaries

Science.gov (United States)

2016-06-01

strategic,” in the cognitive targeting paradigm , are those that directly disable - in the strategic audience’s mind – the attractiveness or...This study analyses the applicability of three operational targeting paradigms to coerce a nuclear-armed adversary in a regional crisis, while...principles and elements of war and understand the coercive ability of utility targeting (a capabilities-based targeting paradigm , CBTP), axiological

Field dependence of magnetic viscosity of CoCrTa in-plane media

NARCIS (Netherlands)

Phan le kim, P.L.K.; Lodder, J.C.; Popma, T.J.A.

1999-01-01

In this paper we will present a study of magnetic viscosity as a function of applied field of CoCrTa/Cr in-plane media. The viscosity versus applied field curves (viscosity curves) of the samples exhibit a sharp peak at remanence coercivity (Hcr). Their activation volume was found to be close to the

Energy conservation in the EC glass industry

Energy Technology Data Exchange (ETDEWEB)

Waal, H. de [TNO Institute of Applied Physics, Delft (Netherlands)

1994-12-31

The data presented in this survey are based mainly on a recent study, performed by the Energy Technology Support Unit ETSU. Harwell Laboratory, United Kingdom, in the context of the EC-Thermie programme. Also, use has been made of a paper `Glass Manufacture, energy and CO{sub 2}-emissions`, presented by G.J. Copley of the British Glass Manufacturers Confederation, Sheffield, United Kingdom, presented at the Thermie Seminar in Wiesbaden, 1992. A third source of information has been the data collected by the CPIV, the European Glass Manufacturers Federation on the present and future economic situation of the EC Glass Industry. (orig.)

Influence of inhomogeneous coercivities on media noise in granular perpendicular media investigated by using magnetic force microscopy

International Nuclear Information System (INIS)

Bai, J.; Takahoshi, H.; Ito, H.; Rheem, Y.W.; Saito, H.; Ishio, S.

2004-01-01

We investigated the influence of the inhomogeneous coercivities on the media noise in a CoPtCr-SiO 2 granular perpendicular magnetic recording medium via ex situ and in situ magnetic force microscopy (MFM) techniques. The ex situ MFM analyses exhibited that transition zigzags contributed to strong magnetic clusters in noise images, and thus resulted in dominant component of the media noise. According to the in situ MFM measurements, it was suggested that an amount of magnetic grains inside a microscopic area reversed like one magnetic ''particle because of strong inter-grain exchange coupling, and that these microscopic areas showed their local magnetic switching behaviors. A mathematic transformation was used to obtain approximately the magnetization distribution in recording layer. And the individual microscopic areas inside recorded bits were compared quasi-quantitatively with those leading large transition zigzags in magnetization switching behaviors. It was indicated that the inhomogeneous coercivities is one of crucial reasons of the medium noise in the perpendicular magnetic recording

Canada files WTO complaint against EC.

Science.gov (United States)

2000-01-01

In December 1998, Canada filed a complaint alleging that the European Communities (EC) had adopted regulations that amounted to a scheme to extend patent terms, limited to pharmaceutical and agricultural chemical products.

NASA FACTS: E. coli AntiMicrobial Satellite (EcAMSat)

Science.gov (United States)

Spremo, Stevan; Cappuccio, Gelsomina; Tomko, David

2013-01-01

The E. coli AntiMicrobial Satellite(EcAMSat) mission will investigate space microgravity affects on the antibiotic resistance of E. coli, a bacterial pathogen responsible for urinary tract infection in humans and animals. EcAMSat is being developed through a partnership between NASAs Ames Research Center and the Stanford University School of Medicine. Dr. A.C. Matin is the Stanford University Principal Investigator. EcAMSat will investigate spaceflight effects on bacterial antibiotic resistance and its genetic basis. Bacterial antibiotic resistance may pose a danger to astronauts in microgravity, where the immune response is weakened. Scientists believe that the results of this experiment could help design effective countermeasures to protect astronauts health during long duration human space missions.

High coercivity Sm-Co thin films from elemental Sm/Co multilayer deposition and their microstructural aspects

Energy Technology Data Exchange (ETDEWEB)

Krishnan, M. [Surface Engineering Division, CSIR-National Aerospace Laboratories, Bangalore 560 017 (India); Department of Physics, National Institute of Technology Calicut, Calicut 673601 (India); Predeep, P. [Department of Physics, National Institute of Technology Calicut, Calicut 673601 (India); Sridhara Rao, D.V. [Defence Metallurgical Research Laboratories, Hyderabad 500058 (India); Prajapat, C.L.; Singh, M.R. [Technical Physics Division, Bhabha Atomic Research Centre, Mumbai 400085 (India); Barshilia, Harish C. [Surface Engineering Division, CSIR-National Aerospace Laboratories, Bangalore 560 017 (India); Chowdhury, P., E-mail: pchowdhury@nal.res.in [Surface Engineering Division, CSIR-National Aerospace Laboratories, Bangalore 560 017 (India)

2017-05-15

Hard magnetic thin films with high coercivity were fabricated by magnetron sputtering on MgO(100) and quartz substrates. The films were grown by depositing sequentially Sm and Co layers at an elevated substrate temperature of 500 °C. Subsequent post-annealing was carried out at various temperatures in range of 500–700 °C to form Sm-Co hard magnetic thin films. X-ray diffraction studies revealed the formation of randomly oriented SmCo{sub 5} crystallites on quartz substrate, whereas, a textured growth of Sm{sub 2}Co{sub 7} with strong (110) crystalline phases was observed on MgO substrate. Microstructural analyses were carried out using Transmission Electron Microscopy (TEM) for samples grown on MgO substrate at 650 °C and inferred the presence of high density planar defects along with large grain boundaries. Further microdiffraction studies confirmed the presence of SmCo{sub 3} as an impurity phase in the films. Magnetic hysteresis measurements indicate the square hysteresis behaviors with high coercivity value of 3.1 T and 2.7 T for 650 °C annealed samples on both MgO and quartz substrates, respectively. The origin of such high coercivity value was then correlated with pinning type of spin reversal mechanism as confirmed through the analyses of demagnetization curves. The magnetic force microscopy images for films on MgO substrate, annealed at 650 °C, revealed the presence of magnetic domains with size higher than 1 µm. The formed magnetic domains lacked well defined boundaries indicating an enhanced exchange coupling between the grain clusters. - Highlights: • Ewald technique in micromagnetic simulations with periodic boundary conditions. • Effect of micromagnetic parameters on hysteresis in exchange spring magnets. • Importance of the interface exchange coupling for hard-soft nanocomposites. • Geometry dependence of the optimal soft phase size in exchange spring magnets.

Magnetic structure and microstructure of die-upset hard magnets RE13.75Fe80.25B6 (RE=Nd, Pr): A possible origin of high coercivity

International Nuclear Information System (INIS)

Volkov, V.V.; Zhu, Y.

1999-01-01

In situ transmission electron microscopy magnetizing experiments combined with Lorentz magnetic microscopy in Fresnel endash Foucault modes were used to characterize the magnetic structure of die-upset, high energy-product hard magnets Nd 13.75 Fe 80.25 B 6 and Pr 13.75 Fe 80.25 B 6 . Experimental observations indicate a well-aligned grain structure and quasiperiodic nonaligned open-quotes extended defectclose quotes layers transverse to press direction. The local remanence of the open-quotes defectclose quotes layers is far from saturation when the external field is removed. The layers are enriched with inclusions of approximate composition Nd 7 Fe 3 , generally with a polygonal shape, and are associated with the original ribbon interfaces. They may be responsible for a high coercivity mechanism, since the motion of reverse domains can be impeded by these layers, even when they are nucleated. Thus, a delayed nucleation of reversed domains seems to be a limiting factor for magnetization reversal and coercivity force. Both Lorentz magnetic imaging and high-resolution microscopy highlight the role of magnetocrystalline anisotropy for domain wall-grain boundary interactions and pinning. Local remanence was estimated directly from magnetic moment sensitive Foucault images. copyright 1999 American Institute of Physics

Multistate nonvolatile straintronics controlled by a lateral electric field.

Science.gov (United States)

Iurchuk, V; Doudin, B; Kundys, B

2014-07-23

We present a multifunctional and multistate permanent memory device based on lateral electric field control of a strained surface. Sub-coercive electrical writing of a remnant strain of a PZT substrate imprints stable and rewritable resistance changes on a CoFe overlayer. A proof-of-principle device, with the simplest resistance strain gage design, is shown as a memory cell exhibiting 17-memory states of high reproducibility and reliability for nonvolatile operations. Magnetoresistance of the film also depends on the cell state, and indicates a rewritable change of magnetic properties persisting in the remnant strain of the substrate. This makes it possible to combine strain, magnetic and resistive functionalities in a single memory element, and suggests that sub-coercive stress studies are of interest for straintronics applications.

Thermal dependence of coercivity in granular CoNiCu glass coated microwires

International Nuclear Information System (INIS)

Zhukova, V.; Zhukov, A.; Palomares, F.J.; Pigazo, F.; Cebollada, F.; Del Val, J.J.; Garcia, C.; Gonzalez, J.M.; Gonzalez, J.

2007-01-01

Cu 80 Co 19 Ni 1 glass covered microwire samples with different geometric ratio, 0.13≤ρ≤0.5, has been investigated by using X-ray diffraction (XRD) and VSM technique. Our results show (i) the presence of FCC Co crystallites dispersed on the Cu matrix, (ii) the observation in all the samples of the coercivity, at room temperature, of the order of kA, exhibiting a maximum and decreased down to a value of the order of the room temperature one at 25 K. These results are discussed in terms of a distribution of superparamagnetic Co nanoparticles

Nuclear power in the EC

International Nuclear Information System (INIS)

Charrault, J.C.

1991-01-01

Nuclear power accounts for some 35% of electricity production in the European Community (EC). Using a mathematical analysis, based on different scenarios, i.e. low/high electricity demand and nuclear moratorium/revival, various demand forecasts are made. A pragmatic approach, considering conventional power generation pollution problems, forecasts a revival of nuclear power

Mathematical modeling improves EC50 estimations from classical dose-response curves.

Science.gov (United States)

Nyman, Elin; Lindgren, Isa; Lövfors, William; Lundengård, Karin; Cervin, Ida; Sjöström, Theresia Arbring; Altimiras, Jordi; Cedersund, Gunnar

2015-03-01

The β-adrenergic response is impaired in failing hearts. When studying β-adrenergic function in vitro, the half-maximal effective concentration (EC50 ) is an important measure of ligand response. We previously measured the in vitro contraction force response of chicken heart tissue to increasing concentrations of adrenaline, and observed a decreasing response at high concentrations. The classical interpretation of such data is to assume a maximal response before the decrease, and to fit a sigmoid curve to the remaining data to determine EC50 . Instead, we have applied a mathematical modeling approach to interpret the full dose-response curve in a new way. The developed model predicts a non-steady-state caused by a short resting time between increased concentrations of agonist, which affect the dose-response characterization. Therefore, an improved estimate of EC50 may be calculated using steady-state simulations of the model. The model-based estimation of EC50 is further refined using additional time-resolved data to decrease the uncertainty of the prediction. The resulting model-based EC50 (180-525 nm) is higher than the classically interpreted EC50 (46-191 nm). Mathematical modeling thus makes it possible to re-interpret previously obtained datasets, and to make accurate estimates of EC50 even when steady-state measurements are not experimentally feasible. The mathematical models described here have been submitted to the JWS Online Cellular Systems Modelling Database, and may be accessed at http://jjj.bio.vu.nl/database/nyman. © 2015 FEBS.

ST ECS error handling and detector safety

CERN Document Server

Esperante Pereira, D

2010-01-01

This note describes the automatic operation sequences that the ECS implements in order to operate the ST detector in a safe and reliable way. First, the start-up sequences to set the detector in a well known state are described. In addition the possible ST detector states based on the status of the different detector elements will be defined. The states are of crucial interest for the safe operation of the detector when the LHC beam is ready. Besides, the ECS automatic actions taken in case of abnormal status of any of the detector elements are reported. Next, the operational alarm ranges and the error recovery mechanisms are mentioned.

EC Transmission Line Risk Identification and Analysis

Energy Technology Data Exchange (ETDEWEB)

Bigelow, Tim S [ORNL

2012-04-01

The purpose of this document is to assist in evaluating and planning for the cost, schedule, and technical project risks associated with the delivery and operation of the EC (Electron cyclotron) transmission line system. In general, the major risks that are anticipated to be encountered during the project delivery phase associated with the implementation of the Procurement Arrangement for the EC transmission line system are associated with: (1) Undefined or changing requirements (e.g., functional or regulatory requirements) (2) Underperformance of prototype, first unit, or production components during testing (3) Unavailability of qualified vendors for critical components Technical risks associated with the design and operation of the system are also identified.

Angular and geometry dependence of coercivity and remanence nickel nanotube isolated

Energy Technology Data Exchange (ETDEWEB)

Gomes, J.L.; Davila, Y.G.; Garcia, R.P.; Del Toro, A.D.; Martins, I.G.; Hernandez, E.P. [Universidade Federal de Pernambuco (UFPE), PE (Brazil)

2016-07-01

, where we vary the angle of the magnetic field applied to the ferromagnetic system. We investigated the role of geometry in the coercivity and remanence of hysteresis curves, where we analyze the types of magnetization reversal modes that can appear in isolated nanotube system. (author)

EcPV2 DNA in equine genital squamous cell carcinomas and normal genital mucosa.

Science.gov (United States)

Bogaert, Lies; Willemsen, Anouk; Vanderstraeten, Eva; Bracho, Maria A; De Baere, Cindy; Bravo, Ignacio G; Martens, Ann

2012-07-06

Squamous cell carcinoma (SCC) represents the most common genital malignant tumor in horses. Similar to humans, papillomaviruses (PVs) have been proposed as etiological agents and recently Equine papillomavirus type 2 (EcPV2) has been identified in a subset of genital SCCs. The goals of this study were (1) to determine the prevalence of EcPV2 DNA in tissue samples from equine genital SCCs, penile intraepithelial neoplasia (PIN) and penile papillomas, using EcPV2-specific PCR, (2) to examine the prevalence of latent EcPV2 infection in healthy genital mucosa and (3) to determine genetic variability within EcPV2 and to disentangle phylogenetic relationships of EcPV2 among PVs. EcPV2 DNA was detected in all but one penile SCC (15/16), in all PIN lesions (8/8) and penile papillomas (4/4). Additionally, EcPV2 DNA was demonstrated in one of two metastasized lymph nodes, one contact metastasis in the mouth, two vaginal and one anal lesion. In healthy horses, EcPV2 DNA was detected in 10% (4/39) of penile swabs but in none of vulvovaginal swabs (0/20). This study confirms the presence of EcPV2 DNA in equine genital SCCs and shows its involvement in anal lesions, a lymph node and contact metastases. Latent EcPV2 presence was also shown in normal male genital mucosa. We found that different EcPV2 variants cocirculate among horses and that EcPV2 is related to the Delta+Zeta PVs and is only a very distant relative of high-risk human PVs causing genital cancer. Thus, similar viral tropism and similar malignant outcome of the infection do not imply close evolutionary relationship. Copyright © 2012 Elsevier B.V. All rights reserved.

Coercive Therapy in East and West: A Brief Review

Directory of Open Access Journals (Sweden)

Mohammad Jafar Bahredar

2009-04-01

Full Text Available "nAbstract: The physician-patient relationship has been undergoing significant changes in recent decades in Western countries. Taking a client-centered approach, society has given more autonomy and freedom to patients. The patient is regarded as a consumer who is looking for the best and most scientific approach and is free to choose among different methods of treatment. The role of the physician is only a guiding role. On the other hand, in Eastern countries, we still experience a parent-child relationship in the therapeutic setting. Eastern patients expect direct advice from their physicians and the family has an important role in decision-making. An approach which is considered coercive in Western countries could still be a useful and acceptable one in Eastern culture. The main goal of the authors in this paper is comparison of different attitudes toward this issue in Eastern and Western cultures.

The EC6 - an enhanced mid-sized reactor with fuel cycle applications

International Nuclear Information System (INIS)

Soulard, M.; Yu, S.; Hopwood, J.; Hastings, I.J.

2011-01-01

Atomic Energy of Canada Limited (AECL) has two CANDU reactor products matched to markets: the Enhanced CANDU 6 (EC6), a modern 700 MWe-class design, and the Advanced CANDU Reactor (ACR-1000), a 1200 MWe-class Gen III+ design. Both reactor types are designed to meet both market-, and customer-driven needs; the ACR-1000 design is 90% complete and market-ready. The EC6 incorporates the CANDU 6's well-proven features, and adds enhancements that make the reactor even safer and easier to operate. The EC6 is the only mid-sized reactor with a proven pedigree that meets modern reactor expectations and regulatory standards. It is sized for smaller grids and also has outstanding fuel-cycle capability. The EC6 has domestic and offshore market pull and is the current focus of AECL's development program; market interest in the ACR-1000 is anticipated in the longer term. Some of the key features incorporated into the EC6 include upgrading containment and seismic capability to meet modern standards, shortening the overall project schedule, addressing obsolescence issues, optimizing maintenance outages and incorporating lessons learnt through feedback obtained from the operating plants. The EC6 utilizes modern computers and a distributed control system housed in an advanced control room which, along with automated testing and on-line diagnostics, make the plant easier and safer to operate, with minimal operator intervention. The first deployment of the EC6 is anticipated in Canada; off-shore markets are also being pursued. The EC6 burns natural uranium as standard. But, high neutron economy, on-power refuelling, a simple fuel bundle, and the fundamental CANDU fuel channel design provide the EC6 with the flexibility to accommodate a range of advanced fuels. (author)

ICECAP: an integrated, general-purpose, automation-assisted IC50/EC50 assay platform.

Science.gov (United States)

Li, Ming; Chou, Judy; King, Kristopher W; Jing, Jing; Wei, Dong; Yang, Liyu

2015-02-01

IC50 and EC50 values are commonly used to evaluate drug potency. Mass spectrometry (MS)-centric bioanalytical and biomarker labs are now conducting IC50/EC50 assays, which, if done manually, are tedious and error-prone. Existing bioanalytical sample preparation automation systems cannot meet IC50/EC50 assay throughput demand. A general-purpose, automation-assisted IC50/EC50 assay platform was developed to automate the calculations of spiking solutions and the matrix solutions preparation scheme, the actual spiking and matrix solutions preparations, as well as the flexible sample extraction procedures after incubation. In addition, the platform also automates the data extraction, nonlinear regression curve fitting, computation of IC50/EC50 values, graphing, and reporting. The automation-assisted IC50/EC50 assay platform can process the whole class of assays of varying assay conditions. In each run, the system can handle up to 32 compounds and up to 10 concentration levels per compound, and it greatly improves IC50/EC50 assay experimental productivity and data processing efficiency. © 2014 Society for Laboratory Automation and Screening.

Rice evapotranspiration at the field and canopy scales under water-saving irrigation

Science.gov (United States)

Liu, Xiaoyin; Xu, Junzeng; Yang, Shihong; Zhang, Jiangang

2018-04-01

Evapotranspiration (ET) is an important process of land surface water and thermal cycling, with large temporal and spatial variability. To reveal the effect of water-saving irrigation (WSI) on rice ET at different spatial scales and understand the cross spatial scale difference, rice ET under WSI condition at canopy (ETCML) and field scale (ETEC) were measured simultaneously by mini-lysimeter and eddy covariance (EC) in the rice season of 2014. To overcome the shortage of energy balance deficit by EC system, and evaluate the influence of energy balance closure degree on ETEC, ETEC was corrected as {ET}_{EC}^{*} by energy balance closure correction according to the evaporative fraction. Seasonal average daily ETEC, {ET}_{EC}^{*} and ETCML of rice under WSI practice were estimated as 3.12, 4.03 and 4.35 mm day-1, smaller than the values reported in flooded paddy fields. Daily ETEC, {ET}_{EC}^{*} and ETCML varied in a similar trends and reached the maximum in late tillering, then decreased along with the crop growth in late season. The value of ETEC was much lower than ETCML, and was frequently 1-2 h lagged behind ETCML. It indicated that the energy balance deficit resulted in underestimation of crop ET by EC system. The corrected value of {ET}_{EC}^{*} matched ETCML much better than ETEC, with a smaller RMSE (0.086 mm h-1) and higher R 2 (0.843) and IOA (0.961). The time lapse between {ET}_{EC}^{*} and ETCML was mostly shortened to less than 0.5 h. The multiple stepwise regression analysis indicated that net radiation ( R n) is the dominant factor for rice ET, and soil moisture ( θ) is another significant factor ( p rice fields. The difference between ETCML and {ET}_{EC}^{*} ({ET}_{CML} - {ET}_{EC}^{*}) were significantly ( p rice ET in WSI fields, and for its cross scale conversion.

Anisotropy and Microstructure of High Coercivity Rare Earth Iron Permanent Magnets, List of Papers Published

Science.gov (United States)

1989-01-01

hardly influences both the pared by three different production technologies, absolute value of HA and its temperature dependence. The permanent magnets...ing reverse domains [2]. pared from 99.5% pure cast material supplied by The application of these magnets has been Rare Earth Products. The...the c/ re 3b Fig.. E ncrographs showingthe celular precipitation structure of precipitation hardened SmCo 2:17 magnets (a). In low coercivity magnets

Lymphocyte adhesion to endothelial cell (EC) is stimulated by phorbol esters

International Nuclear Information System (INIS)

Haskard, D.; Cavender, D.; Ziff, M.

1986-01-01

The effect of phorbol esters on T cell adhesion to EC has been studied. The phorbol esters 12-0-tetradecanoyl-phorbol-13-acetate and 4-beta-phorbol-12-13-dibutyrate, but not the biologically inert 4-0-methyl-phorbol-12-13-didecanoate strongly increased the binding of 51 Cr-labeled T cells to human umbilical vein EC monolayers in microtiter wells. Increase in binding was observed at 0.3 ng/ml with maximal enhancement at 50 ng/ml. Both unstimulated and phorbol ester activated T cells displayed a substantially greater binding affinity for EC than for fibroblasts or plastic. Binding enhancement occurred within one minute, with maximal increase after 15 min. Preincubation studies showed that binding enhancement was entirely attributable to an effect on T cells, with no action on EC. Additive binding enhancement was seen when phorbol esters and reagents that increase adhesion by actions on EC (LPS, IL-1 and IFN-γ) were used together. Increase in adhesion of activated T lymphocytes to EC may explain the greater emigration of activated T cells than small resting T cells into inflammatory foci in vivo. The rapid onset of the phorbol effect suggests that this may be an important mechanism for immediate localization of circulating T cells in the cellular immune response, activated, perhaps, at the endothelial blood-tissue interface

On the practical exploitability of dual EC in TLS implementations

NARCIS (Netherlands)

Checkoway, S.; Fredrikson, M.; Niederhagen, R.F.; Everspaugh, A.; Green, M.; Lange, T.; Ristenpart, T.; Bernstein, D.J.; Maskiewicz, J,; Shacham, H.

2014-01-01

This paper analyzes the actual cost of attacking TLS implementations that use NIST’s Dual EC pseudorandom number generator, assuming that the attacker generated the constants used in Dual EC. It has been known for several years that an attacker generating these constants and seeing a long enough

EC6 safety enhancement - including impact of Fukushima lessons learned

Energy Technology Data Exchange (ETDEWEB)

Yu, S.; Zemdegs, R.; Boyle, S.; Soulard, M., E-mail: stephen.yu@candu.com [Candu Energy Inc., Mississauga, Ontario (Canada)

2012-09-15

The Enhanced CANDU 6 (EC6) is the new Generation III CANDU reactor design that meets the most up to date regulatory requirements and customer expectations. EC6 builds on the proven high performance design inch as the Qinshan CANDU 6 units and has made improvements to safety and operational performance, and has incorporated extensive operational feedback including Fukushima. The Fukushima Dai-ichi March 11, 2011 event has demonstrated the importance of defence-in-depth considerations for beyond-design basis events, including severe accidents. The EC6 design is based on the defence-in-depth principles and provides further design features that address the lessons learned from Fukushima. (author)

[Coercive Measures in Child and Adolescent Psychiatry in Post-war Germany, Using the Example of the "Pflege- und Beobachtungsstation" in the State Psychiatric Hospital Weissenau (1951-1966)].

Science.gov (United States)

Afschar-Hamdi, Sima; Schepker, Klaus

2017-09-01

Coercive Measures in Child and Adolescent Psychiatry in Post-war Germany, Using the Example of the "Pflege- und Beobachtungsstation" in the State Psychiatric Hospital Weissenau (1951-1966) The patient admissions at the children's ward of the State Psychiatric Hospital Weissenau in the years 1951, 1956, 1961 and 1966 were analyzed regarding documented coercive measures. Shortage of staff, mainly inadequately skilled personnel, a mixing of age groups in the patient cohort, neurological and psychiatric disorders and of patients who were in need of nursing and of those who needed treatment constituted the general work environment. Coercive measures against patients, mostly disproportionate isolations, were a constant part of daily life on the ward. This affected in particular patients who had to stay longer at the hospital and whose stay was financed by public authority. The uselessness of such measures was known, which can be seen e. g. in the Caretaker's Handbook of that time and the comments in the patient files. The situation still escalated in some cases (for example by transfer to an adult ward). For a long time, coercive measures against patients were part of everyday life at the children's ward of the Weissenau; the actual figures are suspected to be much higher.

Synthesis, morphology and microstructure of pomegranate-like hematite (α-Fe2O3) superstructure with high coercivity

International Nuclear Information System (INIS)

Tadic, Marin; Citakovic, Nada; Panjan, Matjaz; Stanojevic, Boban; Markovic, Dragana; Jovanovic, Đorđe; Spasojevic, Vojislav

2012-01-01

Highlights: ► We found superior magnetic properties of the hematite (α-Fe 2 O 3 ). ► TEM and HRTEM images show a pomegranate-like superstructure. ► Magnetic measurements display high coercivity H C = 4350 Oe at the room temperature. - Abstract: We found novel and superior magnetic properties of the hematite (α-Fe 2 O 3 ) that originate from an internal microstructure of particles and strong inter-particle interactions between nanocrystal sub-units. The hematite particles were synthesized by thermal decomposition of iron (III) nitrate without any template or surfactant. The purity, size, crystallinity, morphology, microstructure and magnetic features of the as-prepared particles were characterized by X-ray diffraction (XRD), scanning electron microscope (SEM), energy-dispersive X-ray spectroscopy (EDX), transmission electron microscopy (TEM), high resolution transmission electron microscopy (HRTEM), Raman spectroscopy (RS) and SQUID magnetometry. An XRD study reveals a pure phase of α-Fe 2 O 3 whereas TEM shows α-Fe 2 O 3 spheres with a diameter of about 150 nm. RS also shows high quality and purity of the sample. Moreover, TEM and HRTEM images show a pomegranate-like superstructure and evidence that the spherical particles are composed of individual well-crystallized nanoparticle sub-units (self-assembled nanoparticles) with a size of about 20 nm. Magnetic measurements display hysteretic behavior at the room temperature with remanent magnetization M r = 0.731 emu/g, saturation magnetization M S = 6.83 emu/g and coercivity H C = 4350 Oe, as well as the Morin transition at T M = 261 K. These results and comparison with those in the literature reveal that the sample has extremely high coercivity. The magnetic properties of the sample are discussed in relation to morphology, internal microstructure, surface effects and exchange and dipole–dipole interactions.

Technology Transfer Bottlenecks and Lessons Learned in Humanitarian Demining EU-funded Research: Analysis and Results from the EC DELVE Project

International Nuclear Information System (INIS)

Bruschini, C.; Sahli, H.; Van Kempen, L.; Schleijpen, R.; Breejen, E. den

2010-01-01

The EC DELVE Support Action (www.delve.vub.ac.be) has analyzed the bottlenecks in the transfer of Humanitarian Demining (HD) technology from technology development to the use in the field, basing itself on the assessment of the European HD Research and Technology Development (RTD) situation from early 1990 until 2006. The developments in HD during the last 10 years underline the fact that in a number of cases demining related developments have been terminated or at least put on hold. A number of lessons learned were drawn, bottlenecks identified and broadly classified as either Confidence, Cost, or Communication related. The study also showed that the funding provided by the European Commission (EC) has led directly to the creation of an extensive portfolio of HD technology development projects. However, the range of instruments available to the EC to finance the necessary R and D was limited to pre-competitive research. The EC had no tools or programs to fund actual product development. The corresponding consequences are detailed in the study. The separation of the Mine Action and RTD funding streams in the EC did also negatively affect the take-up of new technologies. As a main conclusion, creating coherence between: (1) the EC policy based on political decisions, (2) RTD, testing and industrialization of equipment, and (3) timely deployment, requires a new way of coordinated thinking: 'end-to-end planning' has to be supported by a well organized and coordinated organizational structure involving different DGs (Directorate General) and even extending beyond the EU. This was not the case for Mine Action. (author)

Multistate nonvolatile straintronics controlled by a lateral electric field

International Nuclear Information System (INIS)

Iurchuk, V; Doudin, B; Kundys, B

2014-01-01

We present a multifunctional and multistate permanent memory device based on lateral electric field control of a strained surface. Sub-coercive electrical writing of a remnant strain of a PZT substrate imprints stable and rewritable resistance changes on a CoFe overlayer. A proof-of-principle device, with the simplest resistance strain gage design, is shown as a memory cell exhibiting 17-memory states of high reproducibility and reliability for nonvolatile operations. Magnetoresistance of the film also depends on the cell state, and indicates a rewritable change of magnetic properties persisting in the remnant strain of the substrate. This makes it possible to combine strain, magnetic and resistive functionalities in a single memory element, and suggests that sub-coercive stress studies are of interest for straintronics applications. (fast track communication)

A spectroscopic survey of EC4, an extended cluster in Andromeda's halo

Science.gov (United States)

Collins, M. L. M.; Chapman, S. C.; Irwin, M.; Ibata, R.; Martin, N. F.; Ferguson, A. M. N.; Huxor, A.; Lewis, G. F.; Mackey, A. D.; McConnachie, A. W.; Tanvir, N.

2009-07-01

We present a spectroscopic survey of candidate red giant branch stars in the extended star cluster, EC4, discovered in the halo of M31 from our Canada-France-Hawaii Telescope/MegaCam survey, overlapping the tidal streams, Streams`Cp' and `Cr'. These observations used the DEep Imaging Multi-Object Spectrograph mounted on the Keck II telescope to obtain spectra around the CaII triplet region with ~1.3 Å resolution. Six stars lying on the red giant branch within two core radii of the centre of EC4 are found to have an average vr = -287.9+1.9-2.4kms-1 and σv,corr = 2.7+4.2-2.7kms-1, taking instrumental errors into account. The resulting mass-to-light ratio for EC4 is M/L = 6.7+15-6.7Msolar/Lsolar, a value that is consistent with a globular cluster within the 1σ errors we derive. From the summed spectra of our member stars, we find EC4 to be metal-poor, with [Fe/H] = -1.6 +/- 0.15. We discuss several formation and evolution scenarios which could account for our kinematic and metallicity constraints on EC4, and conclude that EC4 is most comparable with an extended globular cluster. We also compare the kinematics and metallicity of EC4 with Streams `Cp' and`Cr', and find that EC4 bears a striking resemblance to Stream`Cp' in terms of velocity, and that the two structures are identical in terms of both their spectroscopic and photometric metallicities. From this, we conclude that EC4 is likely related to Stream`Cp'. The data presented herein were obtained at the W.M. Keck Observatory, which is operated as a scientific partnership among the California Institute of Technology, the University of California and the National Aeronautics and Space Administration. The Observatory was made possible by the generous financial support of the W.M. Keck Foundation. E-mail: mlmc2@ast.cam.ac.uk

Acute toxicity of heavy metals to acetate-utilizing mixed cultures of sulfate-reducing bacteria: EC100 and EC50.

Science.gov (United States)

Utgikar, V P; Chen, B Y; Chaudhary, N; Tabak, H H; Haines, J R; Govind, R

2001-12-01

Acid mine drainage from abandoned mines and acid mine pit lakes is an important environmental concern and usually contains appreciable concentrations of heavy metals. Because sulfate-reducing bacteria (SRB) are involved in the treatment of acid mine drainage, knowledge of acute metal toxicity levels for SRB is essential for the proper functioning of the treatment system for acid mine drainage. Quantification of heavy metal toxicity to mixed cultures of SRB is complicated by the confounding effects of metal hydroxide and sulfide precipitation, biosorption, and complexation with the constituents of the reaction matrix. The objective of this paper was to demonstrate that measurements of dissolved metal concentrations could be used to determine the toxicity parameters for mixed cultures of sulfate-reducing bacteria. The effective concentration, 100% (EC100), the lowest initial dissolved metal concentrations at which no sulfate reduction is observed, and the effective concentration, 50% (EC50), the initial dissolved metal concentrations resulting in a 50% decrease in sulfate reduction, for copper and zinc were determined in the present study by means of nondestructive, rapid physical and chemical analytical techniques. The reaction medium used in the experiments was designed specifically (in terms of pH and chemical composition) to provide the nutrients necessary for the sulfidogenic activity of the SRB and to preclude chemical precipitation of the metals under investigation. The toxicity-mitigating effects of biosorption of dissolved metals were also quantified. Anaerobic Hungate tubes were set up (at least in triplicate) and monitored for sulfate-reduction activity. The onset of SRB activity was detected by the blackening of the reaction mixture because of formation of insoluble ferrous sulfide. The EC100 values were found to be 12 mg/L for copper and 20 mg/L for zinc. The dissolved metal concentration measurements were effective as the indicators of the effect of the

EC environmental legislation and the European oil industry

International Nuclear Information System (INIS)

Luding, W.G.

1993-01-01

EUROPIA has 32 ordinary member companies which own and operate more than 95% of EC refining capacity, plus three associate member companies from EFTA countries. A large part of EUROPIA's efforts is devoted to environmental issues. Among its initial actions, EUROPIA developed Guiding Principles for environmental management which have been adopted by all member companies. This article can only highlight some of the key areas of EC environmental policy of interest to the oil industry. Most of the comments will refer to air pollution issues but, of course, water and ground pollution and waste are equally important subjects. (orig./HS)

Kinetic study on ligand exchange reaction between EC and 99mTc-GH

International Nuclear Information System (INIS)

Wu Chunying; Luo Shineng; Fang Ping; Huang Heyun; Xie Minhao; Meng Hong

1995-01-01

The ligand exchange reaction between EC and 99m Tc-GH and its influence factors such as concentrations of EC and pH were described. The concentration of EC has no influence on the exchange reaction rate constant, while pH is the most important influence factor. The rate constants of ligand exchange reaction at different pH values were determined. The results showed that in order to make the labelling yield of 99m Tc-EC higher than 90%, pH of the reaction must be higher than 8

Deposition of HgTe by electrochemical atomic layer epitaxy (EC-ALE)

CSIR Research Space (South Africa)

Venkatasamy, V

2006-04-01

Full Text Available This paper describes the first instance of HgTe growth by electrochemical atomic layer epitaxy (EC-ALE). EC-ALE is the electrochemical analog of atomic layer epitaxy (ALE) and atomic layer deposition (ALD), all of which are based on the growth...

Analysis of ATLAS FLB-EC6 Experiment using SPACE Code

International Nuclear Information System (INIS)

Lee, Donghyuk; Kim, Yohan; Kim, Seyun

2013-01-01

The new code is named SPACE(Safety and Performance Analysis Code for Nuclear Power Plant). As a part of code validation effort, simulation of ATLAS FLB(Feedwater Line Break) experiment using SPACE code has been performed. The FLB-EC6 experiment is economizer break of a main feedwater line. The calculated results using the SPACE code are compared with those from the experiment. The ATLAS FLB-EC6 experiment, which is economizer feedwater line break, was simulated using the SPACE code. The calculated results were compared with those from the experiment. The comparisons of break flow rate and steam generator water level show good agreement with the experiment. The SPACE code is capable of predicting physical phenomena occurring during ATLAS FLB-EC6 experiment

Measurement of gradient magnetic field temporal characteristics

International Nuclear Information System (INIS)

Bartusek, K.; Jflek, B.

1994-01-01

We describe a technique of measuring the time dependence and field distortions of magnetic fields due to eddy currents (EC) produced by time-dependent magnetic field gradients. The EC measuring technique makes use of a large volume sample and selective RF excitation pulses and free induction decay (FID) (or a spin or gradient echo) to measure the out-of-phase component of the FID, which is proportional to γδB, i.e. the amount the signal is off resonance. The measuring technique is sensitive, easy to implement and interpret, and used for determining pre-emphasis compensation parameters

DOD Electronic Commerce (EC)/Electronic Data Interchange (EDI) in contracting report

Science.gov (United States)

1993-12-01

Use of Electronic Commerce (EC)/Electronic Data Interchange (EDI) to support Department of Defense (DoD) procurement processes has been under consideration for some time. A 1988 Deputy Secretary of Defense memo calls for maximum use of EDI, based on 10 years of DoD EDI investigation and experiments. In 1990, Defense Management Review Decision 941 stated, 'The strategic goal of DoD's current efforts is to provide the department with the capability to initiate, conduct, and maintain its external business related transactions and internal logistics, contracting, and financial activities without requiring the use of hard copy media.' The EC in Contracting PAT membership reflected a broad cross section of Military Services and Defense Agencies working on a full-time basis for 60 days. The diversity of the EC in Contracting PAT ensured that the needs and concerns of all DoD components were addressed during the creation of the report. The resultant plan, therefore, represents a comprehensive approach for implementing EC throughout the DoD.

Conference-EC-US Task Force Joint US-EU Workshop on Metabolomics and Environmental Biotechnology

Energy Technology Data Exchange (ETDEWEB)

PI: Lily Y. Young

2009-06-04

Since 1990, the EC-US Task Force on Biotechnology Research has been coordinating transatlantic efforts to guide and exploit the ongoing revolution in biotechnology and the life sciences. The Task Force was established in June 1990 by the European Commission and the White House Office of Science and Technology Policy. The Task Force has acted as an effective forum for discussion, coordination, and development of new ideas for the last 18 years. Task Force members are European Commission and US Government science and technology administrators who meet annually to enhance communication across the Atlantic, and to encourage collaborative research. Through sponsoring workshops, and other activities, the Task Force also brings together scientific leaders and early career researchers from both sides of the Atlantic to forecast research challenges and opportunities and to promote better links between researchers. Over the years, by keeping a focus on the future of science, the Task Force has played a key role in establishing a diverse range of emerging scientific fields, including biodiversity research, neuroinformatics, genomics, nanobiotechnology, neonatal immunology, transkingdom molecular biology, biologically-based fuels, and environmental biotechnology. The EC-US Task Force has sponsored a number of Working Groups on topics of mutual transatlantic interest. The idea to create a Working Group on Environmental Biotechnology research was discussed in the Task Force meeting of October 1993. The EC-US Working Group on Environmental Biotechnology set as its mission 'To train the next generation of leaders in environmental biotechnology in the United States and the European Union to work collaboratively across the Atlantic.' Since 1995, the Working Group supported three kinds of activities, all of which focus one early career scientists: (1) Workshops on the use of molecular methods and genomics in environmental biotechnology; (2) Short courses with theoretical

ECS: Efficient Communication Scheduling for Underwater Sensor Networks

Directory of Open Access Journals (Sweden)

Lu Hong

2011-03-01

Full Text Available TDMA protocols have attracted a lot of attention for underwater acoustic sensor networks (UWSNs, because of the unique characteristics of acoustic signal propagation such as great energy consumption in transmission, long propagation delay and long communication range. Previous TDMA protocols all allocated transmission time to nodes based on discrete time slots. This paper proposes an efficient continuous time scheduling TDMA protocol (ECS for UWSNs, including the continuous time based and sender oriented conflict analysis model, the transmission moment allocation algorithm and the distributed topology maintenance algorithm. Simulation results confirm that ECS improves network throughput by 20% on average, compared to existing MAC protocols.

A global inventory of aircraft NO{sub x} emissions (ANCAT/EC 2). A revised inventory (1996) by the ECAC/ANCAT and EC working group

Energy Technology Data Exchange (ETDEWEB)

Gardner, R M [Great Minister House, London (United Kingdom). Dept. of Transfert London

1998-12-31

Results of the ANCAT/EC 2 inventory produced by the European ANCAT/EC emissions inventory group is reported. The base year inventory has been completed and is currently being written up for report publication. The ANCAT/EC 2 inventory in the base year, 1991/92, has accounted for a total fuel burn of 132.5 Tg/yr and a NO{sub x} mass of 1.82 Tg/yr. The civil subsonic fleet average emissions index is EI NO{sub x} 13.9. The inventory has accounted for 80% of the IEA refined jet fuel total for 1992. The forecast 2015 inventory accounts for 289.4 Tg/yr fuel and 3.48 Tg/yr NO{sub x}, increases of 118% and 91% respectively. Both datasets will be reported fully in the next few months. (author) 5 refs.

A global inventory of aircraft NO{sub x} emissions (ANCAT/EC 2). A revised inventory (1996) by the ECAC/ANCAT and EC working group

Energy Technology Data Exchange (ETDEWEB)

Gardner, R.M. [Great Minister House, London (United Kingdom). Dept. of Transfert London

1997-12-31

Results of the ANCAT/EC 2 inventory produced by the European ANCAT/EC emissions inventory group is reported. The base year inventory has been completed and is currently being written up for report publication. The ANCAT/EC 2 inventory in the base year, 1991/92, has accounted for a total fuel burn of 132.5 Tg/yr and a NO{sub x} mass of 1.82 Tg/yr. The civil subsonic fleet average emissions index is EI NO{sub x} 13.9. The inventory has accounted for 80% of the IEA refined jet fuel total for 1992. The forecast 2015 inventory accounts for 289.4 Tg/yr fuel and 3.48 Tg/yr NO{sub x}, increases of 118% and 91% respectively. Both datasets will be reported fully in the next few months. (author) 5 refs.

Does the sole description of a tax authority affect tax evasion?--the impact of described coercive and legitimate power.

Science.gov (United States)

Hartl, Barbara; Hofmann, Eva; Gangl, Katharina; Hartner-Tiefenthaler, Martina; Kirchler, Erich

2015-01-01

Following the classic economic model of tax evasion, taxpayers base their tax decisions on economic determinants, like fine rate and audit probability. Empirical findings on the relationship between economic key determinants and tax evasion are inconsistent and suggest that taxpayers may rather rely on their beliefs about tax authority's power. Descriptions of the tax authority's power may affect taxpayers' beliefs and as such tax evasion. Experiment 1 investigates the impact of fines and beliefs regarding tax authority's power on tax evasion. Experiments 2-4 are conducted to examine the effect of varying descriptions about a tax authority's power on participants' beliefs and respective tax evasion. It is investigated whether tax evasion is influenced by the description of an authority wielding coercive power (Experiment 2), legitimate power (Experiment 3), and coercive and legitimate power combined (Experiment 4). Further, it is examined whether a contrast of the description of power (low to high power; high to low power) impacts tax evasion (Experiments 2-4). Results show that the amount of fine does not impact tax payments, whereas participants' beliefs regarding tax authority's power significantly shape compliance decisions. Descriptions of high coercive power as well as high legitimate power affect beliefs about tax authority's power and positively impact tax honesty. This effect still holds if both qualities of power are applied simultaneously. The contrast of descriptions has little impact on tax evasion. The current study indicates that descriptions of the tax authority, e.g., in information brochures and media reports, have more influence on beliefs and tax payments than information on fine rates. Methodically, these considerations become particularly important when descriptions or vignettes are used besides objective information.

Does the sole description of a tax authority affect tax evasion?--the impact of described coercive and legitimate power.

Directory of Open Access Journals (Sweden)

Barbara Hartl

Full Text Available Following the classic economic model of tax evasion, taxpayers base their tax decisions on economic determinants, like fine rate and audit probability. Empirical findings on the relationship between economic key determinants and tax evasion are inconsistent and suggest that taxpayers may rather rely on their beliefs about tax authority's power. Descriptions of the tax authority's power may affect taxpayers' beliefs and as such tax evasion. Experiment 1 investigates the impact of fines and beliefs regarding tax authority's power on tax evasion. Experiments 2-4 are conducted to examine the effect of varying descriptions about a tax authority's power on participants' beliefs and respective tax evasion. It is investigated whether tax evasion is influenced by the description of an authority wielding coercive power (Experiment 2, legitimate power (Experiment 3, and coercive and legitimate power combined (Experiment 4. Further, it is examined whether a contrast of the description of power (low to high power; high to low power impacts tax evasion (Experiments 2-4. Results show that the amount of fine does not impact tax payments, whereas participants' beliefs regarding tax authority's power significantly shape compliance decisions. Descriptions of high coercive power as well as high legitimate power affect beliefs about tax authority's power and positively impact tax honesty. This effect still holds if both qualities of power are applied simultaneously. The contrast of descriptions has little impact on tax evasion. The current study indicates that descriptions of the tax authority, e.g., in information brochures and media reports, have more influence on beliefs and tax payments than information on fine rates. Methodically, these considerations become particularly important when descriptions or vignettes are used besides objective information.

Analytic solution of field distribution and demagnetization function of ideal hollow cylindrical field source

Science.gov (United States)

Xu, Xiaonong; Lu, Dingwei; Xu, Xibin; Yu, Yang; Gu, Min

2017-09-01

The Halbach type hollow cylindrical permanent magnet array (HCPMA) is a volume compact and energy conserved field source, which have attracted intense interests in many practical applications. Here, using the complex variable integration method based on the Biot-Savart Law (including current distributions inside the body and on the surfaces of magnet), we derive analytical field solutions to an ideal multipole HCPMA in entire space including the interior of magnet. The analytic field expression inside the array material is used to construct an analytic demagnetization function, with which we can explain the origin of demagnetization phenomena in HCPMA by taking into account an ideal magnetic hysteresis loop with finite coercivity. These analytical field expressions and demagnetization functions provide deeper insight into the nature of such permanent magnet array systems and offer guidance in designing optimized array system.

EC6 for Darlington - a managed-enhancements replication project

International Nuclear Information System (INIS)

Soulard, M.R.

2011-01-01

CANDU 6 design has a well-deserved reputation for lifetime performance and on-time, on-schedule construction. Candu Energy is finalizing development of an upgraded reactor product, the Enhanced CANDU 6 (EC6), which incorporates the CANDU 6's well-proven features, and adds enhancements that make the reactor even more safe and easier to operate. The EC6 is the only mid-sized reactor (700 MWe class) with a proven pedigree that meets modern reactor expectations and regulatory standards. It is sized for smaller grids and also has outstanding fuel-cycle capability. Some of the key features incorporated into the EC6 include increasing the plant's power output, shortening the overall project schedule, addressing obsolescence issues, optimizing maintenance outages and incorporating lessons learnt through feedback obtained from the operating plants. The EC6 utilizes modern computers and a distributed control system housed in an advanced control room which, along with automated testing and on-line diagnostics, make the plant easier and safer to operate, with minimal operator intervention. An array of health monitoring equipment are also installed to foretell impending equipment problems, which can be acted upon, avoiding complications that could result in forced shutdowns. Improvements to the fire protection system and enhanced security features will further protect the assets. Containment and seismic capability are upgraded to meet modern standards. The first deployment of the EC6 is anticipated in Canada; other markets are also being pursued. The EC6 reactor is designed for a target lifetime capacity factor of 92% including 94% year-to-year and a 1% Forced Loss Rate. Since the number and duration of maintenance outages impact plant capacity factors, periodic short duration maintenance outages of less than a month once every 36 months is a key target of the EC6 reactor. This objective is achieved by automating a number of tasks such as shutdown systems testing. The majority

Translation and validation of the Dutch version of the Effective Consumer Scale (EC-17)

NARCIS (Netherlands)

ten Klooster, Peter M.; Taal, Erik; Tjin-Kam-Jet-Siemons, Liseth; Oostveen, J.C.M.; Oostveen, Johanna C.M.; Harmsen, Etelka J.; Tugwell, Peter S.; Rader, Tamara; Lyddiatt, Anne; van de Laar, Mart A F J

2013-01-01

PURPOSE: The Effective Consumer Scale (EC-17) measures the skills of musculoskeletal patients in managing their own healthcare. The objectives of this study were to translate the EC-17 into Dutch and to further evaluate its psychometric properties. METHODS: The EC-17 was translated and cognitively

EC-directive optical radiation - present state of consultation; EG-Richtlinie optische Strahlung - aktueller Beratungsstand

Energy Technology Data Exchange (ETDEWEB)

Pipke, R. [Bundesanstalt fuer Arbeitschutz und Arbeitsmedizin, Dortmund (Germany)

2004-07-01

The draft of a directive on the protection of workers from risks related to radiation in the range from 100 nm to 1 mm (Laser, UV-radiation) is discussed on EC-level. The European concept of regulations on occupational safety and health is outlined and put into reference with other directives on the protection against physical agents (vibrations, noise, electromagnetic fields). Building up on this the present state of consultation of a directive on optical radiation is represented, including major points of consideration. (orig.)

The EC Maritime Industries Forum 1992: Marine resources and research and development

International Nuclear Information System (INIS)

Jenisch, U.K.

1993-01-01

The Maritime Industries Forum (MIF) of the European Community has prepared a comprehensive report covering all the EC maritime industries. The report, published on October 29, 1992, addresses maritime activities such as shipbuilding, shipping, fishing, energy, marine resources and environmental protection. Focal points are research and development measures and strategies. A major objective is to strengthen the competitiveness of the maritime industries via a global and horizontal approach. This paper briefly analyses the M.I.F. Report and concentrates on the EC interests in the field of marine resources such as oil and gas, potable water, aquaculture and fishing, minerals, OTEC/DOWA as well as the environmentally sound technology that is required to allow for a future oriented and sustainable exploitation. Export opportunities for such new technologies and cooperation with third states are an important objective. The proposals of the M.I.F. Report are of a positive, future-oriented nature, appropriate to replace many of the hitherto defensive policies in the maritime area. The industries recognize the responsibility for the revitalization of their industrial sectors. The method of this broad sectoral approach for a new industrial policy in Europe is innovative and a model in itself. With the installation of three specialized new industrial panels in January 1993 the work continues

High-coercivity ultrafine-grained anisotropic Nd–Fe–B magnets processed by hot deformation and the Nd–Cu grain boundary diffusion process

International Nuclear Information System (INIS)

Sepehri-Amin, H.; Ohkubo, T.; Nagashima, S.; Yano, M.; Shoji, T.; Kato, A.; Schrefl, T.; Hono, K.

2013-01-01

The grain boundary diffusion process using an Nd 70 Cu 30 eutectic alloy has been applied to hot-deformed anisotropic Nd–Fe–B magnets, resulting in a substantial enhancement of coercivity, from 1.5 T to 2.3 T, at the expense of remanence. Scanning electron microscopy showed that the areal fraction of an Nd-rich intergranular phase increased from 10% to 37%. The intergranular phase of the hot-deformed magnet initially contained ∼55 at.% ferromagnetic element, while it diminished to an undetectable level after the process. Microscale eutectic solidification of Nd/NdCu as well as a fine lamellae structure of Nd 70 (Co,Cu) 30 /Nd were observed in the intergranular phase. Micromagnetic simulations indicated that the reduction of the magnetization in the intergranular phases leads to the enhancement of coercivity in agreement with the experimental observation

Preparation and properties of the (Sr,BaNb2O6 thin films by using the sputtering method

Directory of Open Access Journals (Sweden)

Diao Chien-Chen

2017-01-01

Full Text Available Strontium barium niobate (Sr0.3Ba0.7Nb2O6, SBN thin films were deposited on silicon substrate by using the radio frequency magnetron sputtering and under different deposition power and time at room temperature. Surface morphology and thicknesses of the SBN thin films were characterized by field emission scanning electron microscopy. The crystallization films at different deposition power and time were analyzed by X-ray diffraction (XRD using CuKα radiation from a Rigaku rotating anode with an incident angle of 2°. The remnant polarization (Pr, saturation polarization (Ps, and minimum coercive field (Ec properties of the metal-ferroelectric-metal (MFM structure were measured using ferroelectric material test instrument. The SBN thin films deposited at 90 min and 125 W had the maximum Pr, Ps, and minimum Ec of 1.26 μC/cm2, 2.41 μC/cm2, and 201.6 kV/cm, respectively. From above results, it knows that the SBN thin films suit for application on ferroelectric random access memory (FeRAM.

Coercive Population Control and Asylum in the U.S.

Directory of Open Access Journals (Sweden)

Connie Oxford

2017-11-01

Full Text Available In 1980, China implemented one of the most controversial population policies in modern times. China’s one-child policy shaped population politics for thirty-five years until its dissolution in 2015. During this time, many women were subjected to routine gynecological examinations, pregnancy testing, abortions, and sterilizations, which were often forced upon them by family planning officials. Some women fled China and sought refuge in the United States after having experienced a forced abortion or forced sterilization or feared that they would be subjected to a forced abortion or forced sterilization. This article focuses on how the U.S. government responded to China’s one-child policy through the passage of immigration laws and policies that made asylum a viable option for Chinese nationals who had been persecuted or feared persecution because of coercive population control policies. Based on observations of asylum hearings and interviews with immigration judges and immigration attorneys, this article uses feminist ethnographic methods to show how China’s one-child policy and U.S. asylum laws shape the gender politics of reproduction and migration.

The representation of tropical upper tropospheric water in EC Earth V2

Energy Technology Data Exchange (ETDEWEB)

Johnston, M.S. [Chalmers University of Technology, Department of Earth and Space Sciences, Goeteburg (Sweden); Swedish Meteorological and Hydrological Institute (SMHI), Norrkoeping (Sweden); Eriksson, P.; Murtagh, D.P. [Chalmers University of Technology, Department of Earth and Space Sciences, Goeteburg (Sweden); Eliasson, S. [Luleaa University of Technology, Department of Computer Science, Electrical and Space Engineering, Kiruna (Sweden); Jones, C.G. [Swedish Meteorological and Hydrological Institute (SMHI), Norrkoeping (Sweden); Forbes, R.M. [ECMWF, Reading, Berkshire (United Kingdom)

2012-12-15

Tropical upper tropospheric humidity, clouds, and ice water content, as well as outgoing longwave radiation (OLR), are evaluated in the climate model EC Earth with the aid of satellite retrievals. The Atmospheric Infrared Sounder and Microwave Limb Sounder together provide good coverage of relative humidity. EC Earth's relative humidity is in fair agreement with these observations. CloudSat and CALIPSO data are combined to provide cloud fractions estimates throughout the altitude region considered (500-100 hPa). EC Earth is found to overestimate the degree of cloud cover above 200 hPa and underestimate it below. Precipitating and non-precipitating EC Earth ice definitions are combined to form a complete ice water content. EC Earth's ice water content is below the uncertainty range of CloudSat above 250 hPa, but can be twice as high as CloudSat's estimate in the melting layer. CERES data show that the model underestimates the impact of clouds on OLR, on average with about 9 W m{sup -2}. Regionally, EC Earth's outgoing longwave radiation can be {proportional_to}20 W m{sup -2} higher than the observation. A comparison to ERA-Interim provides further perspectives on the model's performance. Limitations of the satellite observations are emphasised and their uncertainties are, throughout, considered in the analysis. Evaluating multiple model variables in parallel is a more ambitious approach than is customary. (orig.)

Egg cell-secreted EC1 triggers sperm cell activation during double fertilization.

Science.gov (United States)

Sprunck, Stefanie; Rademacher, Svenja; Vogler, Frank; Gheyselinck, Jacqueline; Grossniklaus, Ueli; Dresselhaus, Thomas

2012-11-23

Double fertilization is the defining characteristic of flowering plants. However, the molecular mechanisms regulating the fusion of one sperm with the egg and the second sperm with the central cell are largely unknown. We show that gamete interactions in Arabidopsis depend on small cysteine-rich EC1 (EGG CELL 1) proteins accumulating in storage vesicles of the egg cell. Upon sperm arrival, EC1-containing vesicles are exocytosed. The sperm endomembrane system responds to exogenously applied EC1 peptides by redistributing the potential gamete fusogen HAP2/GCS1 (HAPLESS 2/GENERATIVE CELL SPECIFIC 1) to the cell surface. Furthermore, fertilization studies with ec1 quintuple mutants show that successful male-female gamete interactions are necessary to prevent multiple-sperm cell delivery. Our findings provide evidence that mutual gamete activation, regulated exocytosis, and sperm plasma membrane modifications govern flowering plant gamete interactions.

EC4IT - A Guide to European Commission Projects for CERN/IT department

CERN Document Server

Jones, R

2012-01-01

European Commission (EC) projects represent an important source of external funding for a number of activities in which IT department is involved. The EC has a set of procedures and formalities for the preparation, negotiation, execution and completion of projects that are different to those normally used at CERN. This document gives an overview of the administrative, financial, reporting and managerial steps involved in participating in an EC project.

Nucleation size of hcp-CoPt dot arrays characterized by time dependence of coercivity

Energy Technology Data Exchange (ETDEWEB)

Kikuchi, N; Kitakami, O [Institute of Multidisciplinary Research for Advanced Materials, Tohoku University, Sendai, 980-8577 (Japan); Mitsuzuka, K; Shimatsu, T; Aoi, H, E-mail: kikuchin@tagen.tohoku.ac.j [Research Institute of Electrical Communication, Tohoku University, Sendai, 980-8577 (Japan)

2010-01-01

The magnetization reversal process for dot arrays is likely to start from a nucleation followed by propagation process. In this study, we estimated the nucleation diameter D{sub n} for dot arrays made from thin hcp-CoPt perpendicular films (thickness {delta}=3 nm) and Co/Pt multilayered films ({delta}=9 nm), respectively. The dot diameter, D, was varied from 30 to 200 nm for CoPt dot arrays, and from 40 to 80 nm for Co/Pt dot arrays. The remanence coercivity was measured at measurement times t' = 10{sup 3} s and 10{sup -5} s (pulse field), and defined as H{sub r} and H{sub r}{sup P}. The energy barrier {Delta}E was evaluated by fitting H{sub r} and H{sub r}{sup P} to Sharrock's equation. The value of D{sub n} was estimated from {Delta}E, {delta} and the effective magnetic anisotropy of dot arrays including the demagnetizing energy due to the dot shape K{sub u}{sup eff}. D{sub n} was independent of Din both series of dot arrays, and about 17 nm for CoPt dot arrays and about 11 nm for Co/Pt dot arrays. These values were close to both the grain size and the exchange length of these films.

Present status of developing petroleum-substituting energy (EC)

Science.gov (United States)

1993-03-01

The EC has had approximately 50% of its total energy demand supplied by imports from the exterior of the Community. Hence, it is getting important to develop oil-substituting renewable energy as well as to curtail the emission of carbon dioxide. In consideration of these situations, the results of investigation on the energy policy of the European Community are described. The policy comprises three courses: European Energy Charter, formation of an open European Community energy market, and environmental conservation. Particularly, concerning the reduction of carbon dioxide emission, the EC Council has decided to introduce carbon dioxide taxation so as to suppress the carbon dioxide emission in the year 2000 to the 1990 level. The arrangement for its introduction, however, encountered with difficulties because of the opposition of various countries other than the European Community and the industrial world of the European Community. Legislation of the investment promotion law for energy saving and the construction of infrastructure footing and an information network are ineffective due to the sluggish fuel price and economic recession. A plurality of EC member countries are advancing a comprehensive activity within the framework of the joint programs of research, development, and demonstration set for the renewable energy policy ensuring energy supply and environmental harmonization.

Technique charts for Kodak EC-L film screen system for portal localization in a 6MV X-ray beam.

Science.gov (United States)

Sandilos, P; Antypas, C; Paraskevopoulou, C; Kouvaris, J; Vlachos, L

2006-01-01

Port films are used in radiotherapy for visual evaluation of the radiation fields and subsequent quantitative analysis. Common port films suffer from poor image quality compared to the simulator-diagnostic films and is desirable to determine the appropriate exposure required for the best image contrast. The aim of this work is to generate technique charts for the Kodak EC-L film screen system for use in a 6MV x-ray beam. Three homogeneous water phantoms were used to simulate head-neck, thorax and abdomen dimensions of adult human, correspondingly. The film screen system was calibrated in a 6MV x-ray beam and under various irradiation conditions. The film screen system behavior was studied as a function of phantom thickness, field size and air gap between the phantom and the film screen system. In each case the optimum film exposure which produces the maximum image contrast was determined. The generated technique charts for the EC-L film screen system and for a 6 MV x-ray beam are used in our radiotherapy department for daily quality assurance of the radiotherapy procedure.

Cooperative Fuzzy Games Approach to Setting Target Levels of ECs in Quality Function Deployment

Directory of Open Access Journals (Sweden)

Zhihui Yang

2014-01-01

Full Text Available Quality function deployment (QFD can provide a means of translating customer requirements (CRs into engineering characteristics (ECs for each stage of product development and production. The main objective of QFD-based product planning is to determine the target levels of ECs for a new product or service. QFD is a breakthrough tool which can effectively reduce the gap between CRs and a new product/service. Even though there are conflicts among some ECs, the objective of developing new product is to maximize the overall customer satisfaction. Therefore, there may be room for cooperation among ECs. A cooperative game framework combined with fuzzy set theory is developed to determine the target levels of the ECs in QFD. The key to develop the model is the formulation of the bargaining function. In the proposed methodology, the players are viewed as the membership functions of ECs to formulate the bargaining function. The solution for the proposed model is Pareto-optimal. An illustrated example is cited to demonstrate the application and performance of the proposed approach.

Cooperative fuzzy games approach to setting target levels of ECs in quality function deployment.

Science.gov (United States)

Yang, Zhihui; Chen, Yizeng; Yin, Yunqiang

2014-01-01

Quality function deployment (QFD) can provide a means of translating customer requirements (CRs) into engineering characteristics (ECs) for each stage of product development and production. The main objective of QFD-based product planning is to determine the target levels of ECs for a new product or service. QFD is a breakthrough tool which can effectively reduce the gap between CRs and a new product/service. Even though there are conflicts among some ECs, the objective of developing new product is to maximize the overall customer satisfaction. Therefore, there may be room for cooperation among ECs. A cooperative game framework combined with fuzzy set theory is developed to determine the target levels of the ECs in QFD. The key to develop the model is the formulation of the bargaining function. In the proposed methodology, the players are viewed as the membership functions of ECs to formulate the bargaining function. The solution for the proposed model is Pareto-optimal. An illustrated example is cited to demonstrate the application and performance of the proposed approach.

EC-LEDS Mexico: Advancing Clean Energy Goals

Energy Technology Data Exchange (ETDEWEB)

2016-07-01

EC-LEDS works with the government of Mexico to help meet its goals of reducing greenhouse gas emissions from the energy sector. The program targets specific, highly technical areas where Mexico has indicated the program can add value and make an impact.

EC-LEDS Supports the Low-Carbon Transition

Energy Technology Data Exchange (ETDEWEB)

2016-09-01

EC-LEDS is a flagship U.S. government-led effort that assists countries to create and implement low emission development strategies, or LEDS -- development frameworks that promote sustainable social and economic development while reducing greenhouse gas emissions over the medium to long term.

VLBA DETERMINATION OF THE DISTANCE TO NEARBY STAR-FORMING REGIONS. IV. A PRELIMINARY DISTANCE TO THE PROTO-HERBIG AeBe STAR EC 95 IN THE SERPENS CORE

International Nuclear Information System (INIS)

Dzib, Sergio; Loinard, Laurent; Rodriguez, Luis F.; Mioduszewski, Amy J.; Boden, Andrew F.; Torres, Rosa M.

2010-01-01

Using the Very Long Base Array, we observed the young stellar object EC 95 in the Serpens cloud core at eight epochs from 2007 December to 2009 December. Two sources are detected in our field and are shown to form a tight binary system. The primary (EC 95a) is a 4-5 M sun proto-Herbig AeBe object (arguably the youngest such object known), whereas the secondary (EC 95b) is most likely a low-mass T Tauri star. Interestingly, both sources are non-thermal emitters. While T Tauri stars are expected to power a corona because they are convective while they go down the Hayashi track, intermediate-mass stars approach the main sequence on radiative tracks. Thus, they are not expected to have strong superficial magnetic fields, and should not be magnetically active. We review several mechanisms that could produce the non-thermal emission of EC 95a and argue that the observed properties of EC 95a might be most readily interpreted if it possessed a corona powered by a rotation-driven convective layer. Using our observations, we show that the trigonometric parallax of EC 95 is π = 2.41 ± 0.02 mas, corresponding to a distance of 414.9 +4.4 -4.3 pc. We argue that this implies a distance to the Serpens core of 415 ± 5 pc and a mean distance to the Serpens cloud of 415 ± 25 pc. This value is significantly larger than previous estimates (d ∼ 260 pc) based on measurements of the extinction suffered by stars in the direction of Serpens. A possible explanation for this discrepancy is that these previous observations picked out foreground dust clouds associated with the Aquila Rift system rather than Serpens itself.

Overview of the ITER EC H and CD system and its capabilities

Energy Technology Data Exchange (ETDEWEB)

Omori, T., E-mail: toshimichi.omori@iter.org [ITER Organization, CS 90 046, 13067 St Paul Lez Durance Cedex (France); Henderson, M.A. [ITER Organization, CS 90 046, 13067 St Paul Lez Durance Cedex (France); Albajar, F. [Fusion for Energy, C/Josep Pla 2, Torres Diagonal Litoral-B3, E-08019 Barcelona (Spain); Alberti, S. [CRPP-Association EURATOM-Confederation Suisse, EPFL Ecublens, CH-1015 Lausanne (Switzerland); Baruah, U. [Institute for Plasma Research, Near Indira Bridge, Bhat, Gandhinagar 382428 (India); Bigelow, T.S. [US ITER Project Office, ORNL, 055 Commerce Park, PO Box 2008, Oak Ridge, TN 37831 (United States); Beckett, B. [ITER Organization, CS 90 046, 13067 St Paul Lez Durance Cedex (France); Bertizzolo, R. [CRPP-Association EURATOM-Confederation Suisse, EPFL Ecublens, CH-1015 Lausanne (Switzerland); Bonicelli, T. [Fusion for Energy, C/Josep Pla 2, Torres Diagonal Litoral-B3, E-08019 Barcelona (Spain); Bruschi, A. [Istituto di Fisica del Plasma, Association EURATOM-ENEA-CNR, Milano (Italy); Caughman, J.B. [US ITER Project Office, ORNL, 055 Commerce Park, PO Box 2008, Oak Ridge, TN 37831 (United States); Chavan, R. [CRPP-Association EURATOM-Confederation Suisse, EPFL Ecublens, CH-1015 Lausanne (Switzerland); Cirant, S. [Istituto di Fisica del Plasma, Association EURATOM-ENEA-CNR, Milano (Italy); Collazos, A. [CRPP-Association EURATOM-Confederation Suisse, EPFL Ecublens, CH-1015 Lausanne (Switzerland); Cox, D.; Darbos, C. [ITER Organization, CS 90 046, 13067 St Paul Lez Durance Cedex (France); Baar, M.R. de [Association EURATOM-FOM, 3430 BE Nieuwegein (Netherlands); Denisov, G. [Institute of Applied Physics, 46 Ulyanov Street, Nizhny Novgorod 603950 (Russian Federation); Farina, D. [Istituto di Fisica del Plasma, Association EURATOM-ENEA-CNR, Milano (Italy); Gandini, F. [ITER Organization, CS 90 046, 13067 St Paul Lez Durance Cedex (France)

2011-10-15

The Electron Cyclotron (EC) system for the ITER tokamak is designed to inject {>=}20 MW RF power into the plasma for Heating and Current Drive (H and CD) applications. The EC system consists of up to 26 gyrotrons (between 1 and 2 MW each), the associated power supplies, 24 transmission lines and 5 launchers. The EC system has a diverse range of applications including central heating and current drive, current profile tailoring and control of plasma magneto-hydrodynamic (MHD) instabilities such as the sawtooth and neoclassical tearing modes (NTMs). This diverse range of applications requires the launchers to be capable of depositing the EC power across nearly the entire plasma cross section. This is achieved by two types of antennas: an equatorial port launcher (capable of injecting up to 20 MW from the plasma axis to mid-radius) and four upper port launchers providing access from inside of mid radius to near the plasma edge. The equatorial launcher design is optimized for central heating, current drive and profile tailoring, while the upper launcher should provide a very focused and peaked current density profile to control the plasma instabilities. The overall EC system has been modified during the past 3 years taking into account the issues identified in the ITER design review from 2007 and 2008 as well as integrating new technologies. This paper will review the principal objectives of the EC system, modifications made during the past 2 years and how the design is compliant with the principal objectives.

Overview of the ITER EC H and CD system and its capabilities

International Nuclear Information System (INIS)

Omori, T.; Henderson, M.A.; Albajar, F.; Alberti, S.; Baruah, U.; Bigelow, T.S.; Beckett, B.; Bertizzolo, R.; Bonicelli, T.; Bruschi, A.; Caughman, J.B.; Chavan, R.; Cirant, S.; Collazos, A.; Cox, D.; Darbos, C.; Baar, M.R. de; Denisov, G.; Farina, D.; Gandini, F.

2011-01-01

The Electron Cyclotron (EC) system for the ITER tokamak is designed to inject ≥20 MW RF power into the plasma for Heating and Current Drive (H and CD) applications. The EC system consists of up to 26 gyrotrons (between 1 and 2 MW each), the associated power supplies, 24 transmission lines and 5 launchers. The EC system has a diverse range of applications including central heating and current drive, current profile tailoring and control of plasma magneto-hydrodynamic (MHD) instabilities such as the sawtooth and neoclassical tearing modes (NTMs). This diverse range of applications requires the launchers to be capable of depositing the EC power across nearly the entire plasma cross section. This is achieved by two types of antennas: an equatorial port launcher (capable of injecting up to 20 MW from the plasma axis to mid-radius) and four upper port launchers providing access from inside of mid radius to near the plasma edge. The equatorial launcher design is optimized for central heating, current drive and profile tailoring, while the upper launcher should provide a very focused and peaked current density profile to control the plasma instabilities. The overall EC system has been modified during the past 3 years taking into account the issues identified in the ITER design review from 2007 and 2008 as well as integrating new technologies. This paper will review the principal objectives of the EC system, modifications made during the past 2 years and how the design is compliant with the principal objectives.

Does the Sole Description of a Tax Authority Affect Tax Evasion? - The Impact of Described Coercive and Legitimate Power

Science.gov (United States)

Hartl, Barbara; Hofmann, Eva; Gangl, Katharina; Hartner-Tiefenthaler, Martina; Kirchler, Erich

2015-01-01

Following the classic economic model of tax evasion, taxpayers base their tax decisions on economic determinants, like fine rate and audit probability. Empirical findings on the relationship between economic key determinants and tax evasion are inconsistent and suggest that taxpayers may rather rely on their beliefs about tax authority’s power. Descriptions of the tax authority’s power may affect taxpayers’ beliefs and as such tax evasion. Experiment 1 investigates the impact of fines and beliefs regarding tax authority’s power on tax evasion. Experiments 2-4 are conducted to examine the effect of varying descriptions about a tax authority’s power on participants’ beliefs and respective tax evasion. It is investigated whether tax evasion is influenced by the description of an authority wielding coercive power (Experiment 2), legitimate power (Experiment 3), and coercive and legitimate power combined (Experiment 4). Further, it is examined whether a contrast of the description of power (low to high power; high to low power) impacts tax evasion (Experiments 2-4). Results show that the amount of fine does not impact tax payments, whereas participants’ beliefs regarding tax authority’s power significantly shape compliance decisions. Descriptions of high coercive power as well as high legitimate power affect beliefs about tax authority’s power and positively impact tax honesty. This effect still holds if both qualities of power are applied simultaneously. The contrast of descriptions has little impact on tax evasion. The current study indicates that descriptions of the tax authority, e.g., in information brochures and media reports, have more influence on beliefs and tax payments than information on fine rates. Methodically, these considerations become particularly important when descriptions or vignettes are used besides objective information. PMID:25923770

Belle monte-carlo production on the Amazon EC2 cloud

International Nuclear Information System (INIS)

Sevior, Martin; Fifield, Tom; Katayama, Nobuhiko

2010-01-01

The Belle II experiment which aims to increase the Luminosity of the KEKB collider by a factor of 50 will search for physics beyond the Standard Model through precision measurements and the investigation of rare processes in Flavour physics. The expected data rate is comparable to a current era LHC experiment with commensurate computing needs. Incorporating commercial cloud computing, such as that provided by the Amazon Elastic Compute Cloud (EC2) into the Belle II computing model may provide a lower Total Cost of Ownership for the Belle II computing solution. To investigate this possibility, we have created a system to conduct the complete Belle Monte Carlo simulation chain on EC2 to benchmark the cost and performance of the service. This paper will describe how this was achieved in addition to the drawbacks and costs of large-scale Monte Carlo production on EC2.

Belle monte-carlo production on the Amazon EC2 cloud

Energy Technology Data Exchange (ETDEWEB)

Sevior, Martin; Fifield, Tom [University of Melbourne, School of Physics, Victoria 3010 Australia (Australia); Katayama, Nobuhiko, E-mail: msevior@gmail.co, E-mail: fifieldt@unimelb.edu.a, E-mail: nobu.katayama@kek.j [High Energy Accelerator Research Organisation (KEK), Tsukuba (Japan)

2010-04-01

The Belle II experiment which aims to increase the Luminosity of the KEKB collider by a factor of 50 will search for physics beyond the Standard Model through precision measurements and the investigation of rare processes in Flavour physics. The expected data rate is comparable to a current era LHC experiment with commensurate computing needs. Incorporating commercial cloud computing, such as that provided by the Amazon Elastic Compute Cloud (EC2) into the Belle II computing model may provide a lower Total Cost of Ownership for the Belle II computing solution. To investigate this possibility, we have created a system to conduct the complete Belle Monte Carlo simulation chain on EC2 to benchmark the cost and performance of the service. This paper will describe how this was achieved in addition to the drawbacks and costs of large-scale Monte Carlo production on EC2.

Genes and proteins of Escherichia coli (GenProtEc).

Science.gov (United States)

Riley, M; Space, D B

1996-01-01

GenProtEc is a database of Escherichia coli genes and their gene products, classified by type of function and physiological role and with citations to the literature for each. Also present are data on sequence similarities among E.coli proteins with PAM values, percent identity of amino acids, length of alignment and percent aligned. The database is available as a PKZip file by ftp from mbl.edu/pub/ecoli.exe. The program runs under MS-DOS on IMB-compatible machines. GenProtEc can also be accessed through the World Wide Web at URL http://mbl.edu/html/ecoli.html.

Permeation of Telone EC through protective gloves.

Science.gov (United States)

Zainal, Hanaa; Que Hee, Shane S

2005-09-30

Telone is a potent fumigant that is based on the chlorinated unsaturated hydrocarbon, 1,3-dichloropropene (1,3-DCP). It is often applied without dilution and so poses severe inhalation and air pollution threats. Urinary metabolites of 1,3-DCP have been detected after Telone skin exposure, so that preventing dermal exposure is also important. The objective of the study was to assess if nitrile and multi-layer ("laminated") gloves provide adequate protection against Telone EC formulation. To accomplish this, disposable (Safeskin) and chemically resistant (Sol-Vex) nitrile and laminated (Barrier mark and Silver Shield) glove materials were challenged by Telone EC with hexane liquid collection in an ASTM-type I-PTC-600 permeation cell. Analyses of cis- and trans-1,3-DCP in the collection fluid at specified times were performed on a moderately polar capillary column by gas chromatography-electron capture detection. Telone EC caused microholes in both nitrile materials, though the chemically protective material was degraded slower than the disposable nitrile. The laminated gloves offered limited protection. Silver Shield protected best because 1.5-2.3 mg 1,3-DCP permeated by 8 h relative to 2.5-7.6 mg for Barrier, implying about 2.5 times more protection for 8 h. Even for Silver Shield, the extent of protection was inadequate as illustrated by a risk assessment of the skin exposure situation. The normalized breakthrough times for both types of laminated gloves varied between 27 and 60 min. It is recommended that Viton gloves still be worn for protection.

Anisotropic magnetism in field-structured composites

International Nuclear Information System (INIS)

Martin, James E.; Venturini, Eugene; Odinek, Judy; Anderson, Robert A.

2000-01-01

Magnetic field-structured composites (FSCs) are made by structuring magnetic particle suspensions in uniaxial or biaxial (e.g., rotating) magnetic fields, while polymerizing the suspending resin. A uniaxial field produces chainlike particle structures, and a biaxial field produces sheetlike particle structures. In either case, these anisotropic structures affect the measured magnetic hysteresis loops, with the magnetic remanence and susceptibility increased significantly along the axis of the structuring field, and decreased slightly orthogonal to the structuring field, relative to the unstructured particle composite. The coercivity is essentially unaffected by structuring. We present data for FSCs of magnetically soft particles, and demonstrate that the altered magnetism can be accounted for by considering the large local fields that occur in FSCs. FSCs of magnetically hard particles show unexpectedly large anisotropies in the remanence, and this is due to the local field effects in combination with the large crystalline anisotropy of this material. (c) 2000 The American Physical Society

Electric-field assisted switching of magnetization in perpendicularly magnetized (Ga,Mn)As films at high temperatures

Science.gov (United States)

Wang, Hailong; Ma, Jialin; Yu, Xueze; Yu, Zhifeng; Zhao, Jianhua

2017-01-01

The electric-field effects on the magnetism in perpendicularly magnetized (Ga,Mn)As films at high temperatures have been investigated. An electric-field as high as 0.6 V nm-1 is applied by utilizing a solid-state dielectric Al2O3 film as a gate insulator. The coercive field, saturation magnetization and magnetic anisotropy have been clearly changed by the gate electric-field, which are detected via the anomalous Hall effect. In terms of the Curie temperature, a variation of about 3 K is observed as determined by the temperature derivative of the sheet resistance. In addition, electrical switching of the magnetization assisted by a fixed external magnetic field at 120 K is demonstrated, employing the gate-controlled coercive field. The above experimental results have been attributed to the gate voltage modulation of the hole density in (Ga,Mn)As films, since the ferromagnetism in (Ga,Mn)As is carrier-mediated. The limited modulation magnitude of magnetism is found to result from the strong charge screening effect introduced by the high hole concentration up to 1.10  ×  1021 cm-3, while the variation of the hole density is only about 1.16  ×  1020 cm-3.

Coercive force changes in Sm(CoFeCuZr)z during step-like heat treatments

International Nuclear Information System (INIS)

Puzanova, T.Z.; Shchegoleva, N.N.; Sakhnova, L.V.; Majkov, V.G.; Shur, Ya.S.; Nikolaeva, N.V.

1987-01-01

Sm(Co 0.67 Fe 0.22 Cu 0.08 Zr 0.03 ) 8.35 alloy, contaning two homogeneous solid solutions SmM 6.85 and SmM 7.75 (M=Co, Fe, Cu, Zr) after high-temperature treatment, is investigated. It is shown, that after isothermal tempering at 800 deg C, SmM 6.85 and SmM 7.75 are close by microstructure and their coercive forces change in a different way during step-like cooling within 700-400 deg C interval. Possibility of producing material, single-phase in magnetic relation, is discussed

Regulatory competences of the EC in the energy sector; Regelungszustaendigkeiten der EG im Bereich Energie

Energy Technology Data Exchange (ETDEWEB)

Baur, J.F.; Blask, H. [Koeln Univ. (Germany). Inst. fuer das Recht der Europaeischen Gemeinschaften und Inst. fuer Energierecht

2002-09-01

In the light of necessary amendments of the Internal Electricity Market Directive and the Internal Gas Market Directive, a debate has evolved within the European Community about lawmaking powers for the energy sector. Whereas the Member States refer to the EC Treaty and deny any lawmaking powers of the EC for the energy sector, the EC defends its position that the EC should have and can derive lawmaking competence for energy policy decisions from the EC Treaty. The author reviews the situation from the legal point of view based on existing provisions and gives an outlook on a possible outcome of the ''constitutional convention'' of the EC which is to meet for discussing a revision of the EC Treaty. (orig./CB) [German] In Bezug auf die geplanten Aenderungen der Binnenmarktrichtlinien fuer Elektrizitaet und Gas werden moegliche Kompetenzen der EG im Bereich der Energiepolitik und ihre Grenzen eroertert. In einer Schlussbetrachtung werden die Ergebnisse zusammengefasst und ein kurzer Ausblick auf die Arbeit des 'Verfassungskonvents' der EU und die anstehende Vertragsrevision geworfen, in deren Rahmen die Implikation einer eigenstaendigen Spezialkompetenz im Bereich Energie erneut thematisiert werden koennte. (orig./CB)

Effect of Cu addition on coercivity and interfacial state of Nd-Fe-B/Nd-rich thin films

International Nuclear Information System (INIS)

Matsuura, M; Sugimoto, S; Fukada, T; Tezuka, N; Goto, R

2010-01-01

This study provides the effect of Cu addition on coercivity (H cJ ) and interfacial microstructure in Nd-Fe-B/Nd-rich thin films. All films were deposited by using ultra high vacuum (UHV) magnetron sputtering, and the Nd-Fe-B layer was oxidized under several atmospheres with different oxygen content. Then, the films were annealed at 250-550 0 C under UHV. The films oxidized in low vacuum (10 -2 -10 -5 Pa) (under low oxygen state) exhibited the recovery of H cJ by the annealing at 450 0 C. On the contrary, the H cJ of the films oxidized in Ar (under high oxygen state) decreased with increasing annealing temperature. However, the H cJ increased drastically at the temperatures above 550 0 C. In addition, the Cu added films, which were annealed at temperatures above 350 0 C, showed higher coercivities than the films without Cu addition. The XRD analysis suggested the existence of C-Nd 2 O 3 phase in the Cu added films annealed at 550 0 C. It can be considered that the Cu addition decreases the eutectic temperature of Nd-rich phase and influences the interfacial state between Nd 2 Fe 14 B and Nd-rich phase.

Influence of microstructural change of the interface between Nd2Fe14B and Nd-O phases on coercivity of Nd-Fe-B films by oxidation and subsequent low-temperature annealing

International Nuclear Information System (INIS)

Matsuura, Masashi; Tezuka, Nobuki; Sugimoto, Satoshi; Goto, Ryota

2011-01-01

This study provides the influence of microstructural change of the interface between Nd 2 Fe 14 B and Nd-O phases on coercivity of Nd-Fe-B thin films during annealing at low temperature (∼350 deg. C). All films were prepared by using ultra high vacuum (UHV) magnetron sputtering, and the Nd-Fe-B layer was oxidized under Ar gas atmosphere (O 2 content; ∼2 Vol.ppm). Then, the films were annealed at 250-350 deg. C under UHV condition. After oxidation, the coercivity of Nd-Fe-B film decreased to around 40% of the coercivity of as-deposited Nd-Fe-B film. The Nd-rich phase changed from α-Nd to amorphous Nd(-O), and the interface of Nd 2 Fe 14 B/Nd(-O) became rough. In the Nd-Fe-B films oxidized and subsequent annealed at 350 deg. C, the coercivity decreased to around 20%. In the films, poly crystalline hcp Nd 2 O 3 phase crystallized in Nd-rich phase, and there were some steps at the surface of Nd 2 Fe 14 B phase contacting with hcp Nd 2 O 3 phase. Regardless of crystal orientation of Nd 2 Fe 14 B, the microstructural changes of the interface described above were observed.

The shift of energy regulatory powers under the framework of Directive 2009/72/EC

International Nuclear Information System (INIS)

Grimm, N. S.

2011-01-01

The paper examines the powers of Member States' national regulatory authorities under the framework of Directive 2009/72/EC of the European Parliament and of the Council of 13 July 2009 concerning common rules for the internal market in electricity and repealing Directive 2003/54/EC (OJEU L 176/37) and analyses the implications of framework of Directive 2009/72/EC on the national laws of the Member States, in particular on the Austrian and German constitutional, administrative and energy laws. The Introductory Part gives a historical overview of the development of national energy regulators under European energy legislation. This Part shows that the national regulatory authorities attract increased attention and that their regulatory powers are on a constant rise. In order to understand the huge impact of the framework of Directive 2009/72/EC on the regulatory regimes of the Member States, this Part briefly examines the former and current powers of the national energy regulators under Austrian and German law. Part Two analyses whether the powers conferred upon national energy regulators under the framework of Directive 2009/72/EC have been enhanced in comparison to those established under the framework of Directive 2003/54/EC. The main focus lies thereby on the propositions made by the European Commission in its Proposal for a Directive of the European Parliament and of the Council amending Directive 2003/54/EC concerning common rules for the internal market in electricity (COM (2007) 528 final, 2.1) and laid down in Directive 2009/72/EC. Part Two comes to the conclusion that the powers of the national energy regulators under the framework of Directive 2009/72/EC have indeed been enhanced in comparison to former regime of Directive 2003/54/EC. Part Three demonstrates that the enhancement of national energy regulators' powers does not benefit the Member States. On the contrary, they lose considerable powers of control over their own national energy regulators. While

Pengaruh Tingkat EC (Electrical Conductivity terhadap Pertumbuhan Tanaman Sawi (Brassica juncea L. pada Sistem Instalasi Aeroponik Vertikal

Directory of Open Access Journals (Sweden)

Pusdima Rahma Pratiwi

2015-07-01

Full Text Available Kebutuhan akan tanaman sawi semakin meningkat, sehingga diperlukan teknologi yang dapat memaksimalkan hasil serta memperbaiki teknik budidaya, salah satunya teknik budidaya aeroponik vertikal. Penelitian ini bertujuan untuk mengetahui respon pertumbuhan tanaman sawi yang terbaik terhadap pengaruh tingkat EC pada larutan nutrisi. Penelitian ini dilaksanakan di daerah Bekasi Timur dengan ketinggian 25 m di atas permukaan laut, dimulai pada bulan April 2014 sampai Juli 2014. Rancangan yang digunakan adalah Rancangan Acak Kelompok dengan 4 perlakuan yaitu A (Tingkat EC 1 mS cm-1, B (Tingkat EC 1,5 mS cm-1, C (Tingkat EC 2 mS cm-1, dan D (Tingkat EC 2,5 mS cm-1 dengan diulang sebanyak 4 kali. Hasil penelitian menunjukkan bahwa tingkat EC berpengaruh terhadap tinggi tanaman sawi pada umur 14 dan 18 hst, luas daun pada umur 26 dan 30 hst, panjang akar pada umur 30 hst, dan bobot basah pada umur 30 hst. Tingkat EC 2,5 mS cm-1 memberikan pengaruh baik terhadap bobot basah. The increasing need of mustard require technologies that can maximize result and improve cultivation, one of them is aeroponic vertical cultivation technique. This research aimed to know the best response of mustard growth on influence of nutrient EC level. This research was carried out in Bekasi Timur with altitude of 25 m above sea level, form April 2014 to July 2014. The design used was Randomized Block Design with 4 treatments that A (EC level 1 mS cm-1, B (EC level 1,5 mS cm-1, C (EC level 2 mS cm-1, and D (EC level  2,5 mS cm-1 with 4 replications. The results showed that EC level affected on plant height at 14 and 18 dap, leaf area at 26 and 30 dap, root length at 30 dap, and wet weight at the age of 30 dap. The EC level 2,5 mS cm-1had better effect on wet weight.

Coercivity enhancement mechanism in Dy-substituted Nd–Fe–B nanoparticles synthesized by sol–gel base method followed by a reduction-diffusion process

Energy Technology Data Exchange (ETDEWEB)

Rahimi, Hamed; Ghasemi, Ali, E-mail: ali13912001@yahoo.com; Mozaffarinia, Reza; Tavoosi, Majid

2017-05-01

In current work, Nd{sub 15−x}Dy{sub x}Fe{sub 77.5}B{sub 7.5} (at%) nanoparticles with different Dy-content (x=0.0, 0.5, 1.0, 1.5, 2.0, 2.5, 3.0) were synthesized by sol–gel method followed by a reduction-diffusion process. The effects of Dy on the magnetic properties and the relations between the microstructure and the coercivity of Dy-substituted Nd–Fe–B nanoparticles have been studied. The coercivity of Nd–Fe–B nanoparticles with the addition of Dy first increase, reaches a maximum, and then starts to decrease. The coercivity of Dy-substituted Nd–Fe–B nanoparticle synthesized by sol–gel method increased from 938.9 to 1663.9 kA/m while the remanence decreased slightly from 1.16 to 1.06 T. The results show that with an increase in Dy content the variation of maximum energy product ((BH){sub max}), lowest-order uniaxial magnetocrystalline anisotropy constant (K{sub u1}), and Curie temperature (T{sub c}) had a trend as same as the coercivity. The Henkel plot showed that the existence of exchange coupling interaction between grains, and the exchange coupling interactions increased with increasing x from 0.0 to 2.0 and then decrease with further increasing x≥2.5. The optimum magnetic properties of Nd–Fe–B nanoparticles with (BH){sub max} =40.38 MGOe, H{sub c}=1663.9 kA/m, B{sub r}=1.08 T were obtained by substituted 2.0 at% Dy. The effects of increasing temperature on magnetic properties of Dy-substituted Nd–Fe–B nanoparticle magnets with 2.0 at% Dy was investigated. The reduced spin-reorientation temperature was obtained for Dy-substituted Nd–Fe–B nanoparticles with 2.0 at% Dy. Below 100 K a spin-reorientation transition was takes place. The temperature coefficient of coercivity (β) was −0.36, −0.46, −0.41, −0.34, −0.29, −0.24, −0.25%/°C at different temperature 50, 100, 150, 200, 250, 300, 350 °C, respectively. Mössbauer spectroscopy was applied to study the composition and properties of Dy-substituted Nd�

Coercivity enhancement mechanism in Dy-substituted Nd–Fe–B nanoparticles synthesized by sol–gel base method followed by a reduction-diffusion process

International Nuclear Information System (INIS)

Rahimi, Hamed; Ghasemi, Ali; Mozaffarinia, Reza; Tavoosi, Majid

2017-01-01

In current work, Nd 15−x Dy x Fe 77.5 B 7.5 (at%) nanoparticles with different Dy-content (x=0.0, 0.5, 1.0, 1.5, 2.0, 2.5, 3.0) were synthesized by sol–gel method followed by a reduction-diffusion process. The effects of Dy on the magnetic properties and the relations between the microstructure and the coercivity of Dy-substituted Nd–Fe–B nanoparticles have been studied. The coercivity of Nd–Fe–B nanoparticles with the addition of Dy first increase, reaches a maximum, and then starts to decrease. The coercivity of Dy-substituted Nd–Fe–B nanoparticle synthesized by sol–gel method increased from 938.9 to 1663.9 kA/m while the remanence decreased slightly from 1.16 to 1.06 T. The results show that with an increase in Dy content the variation of maximum energy product ((BH) max ), lowest-order uniaxial magnetocrystalline anisotropy constant (K u1 ), and Curie temperature (T c ) had a trend as same as the coercivity. The Henkel plot showed that the existence of exchange coupling interaction between grains, and the exchange coupling interactions increased with increasing x from 0.0 to 2.0 and then decrease with further increasing x≥2.5. The optimum magnetic properties of Nd–Fe–B nanoparticles with (BH) max =40.38 MGOe, H c =1663.9 kA/m, B r =1.08 T were obtained by substituted 2.0 at% Dy. The effects of increasing temperature on magnetic properties of Dy-substituted Nd–Fe–B nanoparticle magnets with 2.0 at% Dy was investigated. The reduced spin-reorientation temperature was obtained for Dy-substituted Nd–Fe–B nanoparticles with 2.0 at% Dy. Below 100 K a spin-reorientation transition was takes place. The temperature coefficient of coercivity (β) was −0.36, −0.46, −0.41, −0.34, −0.29, −0.24, −0.25%/°C at different temperature 50, 100, 150, 200, 250, 300, 350 °C, respectively. Mössbauer spectroscopy was applied to study the composition and properties of Dy-substituted Nd–Fe–B magnet. Microstructure analysis showed a

Open Circuit Resonant (SansEC) Sensor Technology for Lightning Mitigation and Damage Detection and Diagnosis for Composite Aircraft Applications

Science.gov (United States)

Szatkowski, George N.; Dudley, Kenneth L.; Smith, Laura J.; Wang, Chuantong; Ticatch, Larry A.

2014-01-01

aircraft composite damage detection and diagnosis. Experimental test results on seeded fault damage coupons and computational modeling simulation results are presented. This paper also presents the shielding effectiveness along with the lightning direct effect test results from several different SansEC LSP and baseline protected and unprotected carbon fiber reinforced polymer (CFRP) test panels struck at 40 and 100 kiloamperes following a universal common practice test procedure to enable damage comparisons between SansEC LSP configurations and common practice copper mesh LSP approaches. The SansEC test panels were mounted in a LSP test bed during the lightning test. Electrical, mechanical and thermal parameters were measured during lightning attachment and are presented with post test nondestructive inspection comparisons. The paper provides correlational results between the SansEC sensors computed electric field distribution and the location of the lightning attachment on the sensor trace and visual observations showing the SansEC sensor's affinity for dispersing the lightning attachment.

The upgrade of the DIII-D EC system using 120 GHz ITER gyrotrons

International Nuclear Information System (INIS)

Callis, R.W.; Lohr, J.; Gorelov, I.A.; Ponce, D.; Kajiwara, K.; Tooker, J.F.

2005-01-01

The planned growth in the EC system on DIII-D over the next few years requires the installation of two depressed collector gyrotrons, a high voltage power supply, two low loss transmission lines, and the required support equipment. This new DIII-D EC equipment could be made identical to the ITER EC system requirements. By building the DIII-D hardware to the ITER specifications, it will allow ITER to gain beneficial prototyping experience on a working tokamak, prior to committing to building the hardware for delivery to ITER

Revisiting the EC/CMB model for extragalactic large scale jets

Science.gov (United States)

Lucchini, M.; Tavecchio, F.; Ghisellini, G.

2017-04-01

One of the most outstanding results of the Chandra X-ray Observatory was the discovery that AGN jets are bright X-ray emitters on very large scales, up to hundreds of kpc. Of these, the powerful and beamed jets of flat-spectrum radio quasars are particularly interesting, as the X-ray emission cannot be explained by an extrapolation of the lower frequency synchrotron spectrum. Instead, the most common model invokes inverse Compton scattering of photons of the cosmic microwave background (EC/CMB) as the mechanism responsible for the high-energy emission. The EC/CMB model has recently come under criticism, particularly because it should predict a significant steady flux in the MeV-GeV band which has not been detected by the Fermi/LAT telescope for two of the best studied jets (PKS 0637-752 and 3C273). In this work, we revisit some aspects of the EC/CMB model and show that electron cooling plays an important part in shaping the spectrum. This can solve the overproduction of γ-rays by suppressing the high-energy end of the emitting particle population. Furthermore, we show that cooling in the EC/CMB model predicts a new class of extended jets that are bright in X-rays but silent in the radio and optical bands. These jets are more likely to lie at intermediate redshifts and would have been missed in all previous X-ray surveys due to selection effects.

Process-engineering control valves under the EC codes; Steuerventile fuer die Prozesstechnik im Geltungsbereich der EG-Richtlinien

Energy Technology Data Exchange (ETDEWEB)

Gohlke, B. [IMI Norgren Herion Fluidtronic GmbH und Co. KG, Fellbach (Germany)

2003-09-01

The European Parliament and European Council have enacted special codes in order to implement uniform conditions in all countries of the European Community. The manufacturers of technical and commercial products are obliged to adhere to these codes. Harmonized standards, which are to be used as a tool for the implementation of the codes, are embedded at another level of the overall 'European reference literature'. Two EC codes, in particular, are definitive for fluids engineering: On the one hand, the EC Machinery Code, 98/37/EC and, on the other hand, the EC Pressurized Equipment Code, 97/23/EC. These EC codes cover, inter alia, machinery and chemical process-engineering plants, and conventional power generating plants. Norgren-Herion, a manufacturer of fluid engineering components, perceived a necessity for positioning its control valves in the scope of applicability of the EC codes. This article describes experience with the EC codes from the control valve manufacturer's point of view and examines the various qualification procedures for control valves. (orig.)

Genes and proteins of Escherichia coli K-12 (GenProtEC).

Science.gov (United States)

Riley, M

1997-01-01

GenProtEC is a database of Escherichia coli genes and their gene products, classified by type of function and physiological role and with citations to the literature for each. Also present are data on sequence similarities amongE.coliproteins with PAM values, percent identity of amino acids, length of alignment and percent aligned. GenProtEC can also be accessed through the World Wide Web at URL http://mbl.edu/html/ecoli.html .

EC Competition law and environmental protection

Energy Technology Data Exchange (ETDEWEB)

Rantala, M.

1996-12-31

Due to the increasing attention paid on environmental protection, by the European Community, the Member States and the consumers, undertakings are forced to adjust their policies to meet the new demands posed by public authorities and the market. This has an inevitable impact on competition. No matter how acceptable the goals were, the means are to be assessed also from the competition law point of view. The objective of this study is to analyze the situations where conflicts may take place, the main sources of research being the principles of law relating to the Treaty ,the judgements of the European Court of Justice, the Commission Decisions and other official documents of the Community as well as legal literature. This study classifies the Community and Member State instruments which are used for environmental protection into four categories. These are legislative, market-based, horizontal and financial supporting instruments. Undertakings` environmental practices, which are capable of affecting competition, are examined under Articles 85 and 86 EC, some attention being paid also to Article 90 EC. The touching points of competition policy and environmental protection in such cases are scrutinized under three headings. These are the two, in this case, most relevant public instruments, ie. legislative and market-based measures, and the voluntary actions of undertakings. (42 refs.)

Enhanced CANDU 6 (EC6): a proven mid-sized reactor with fuel cycle capability

International Nuclear Information System (INIS)

Hopwood, J.; Soulard, M.; Hastings, I.J.

2011-01-01

Atomic Energy of Canada (AECL) is finalizing development of the Enhanced CANDU 6 (EC6), which incorporates the CANDU 6's well-proven features, and adds enhancements that make the reactor even more safe and easier to operate. The EC6 is the only mid-sized reactor (700 MWe class) with a proven pedigree that meets modern reactor expectations and regulatory standards. It is sized for smaller grids and also has outstanding fuel-cycle capability. Changes are incremental and consistent with the CANDU 6 project approach. The EC6 utilizes modern computers and a distributed control system housed in an advanced control room which, along with automated testing and on-line diagnostics, make the plant easier and safer to operate, with minimal operator intervention. Containment and seismic capability are upgraded to meet modern standards. The first deployment of the EC6 is anticipated in Canada; international markets are also being pursued. AECL is performing a comprehensive review of the EC6 design in the wake of the Fukushima accident, will review lessons learned, and incorporate any necessary improvements into new build design. (author)

Enhanced CANDU 6 (EC6): a proven mid-sized reactor with fuel cycle capability

International Nuclear Information System (INIS)

Hopwood, J.; Soulard, M.; Hastings, I.J.

2011-01-01

Atomic Energy of Canada (AECL) is finalizing development of the Enhanced CANDU 6 (EC6), which incorporates the CANDU 6's well-proven features, and enhancements that make the reactor even more safe and easier to operate. The EC6 is the only mid-sized reactor (700 MWe class) with a proven pedigree that meets modern reactor expectations and regulatory standards. It is sized for smaller grids and also has outstanding fuel-cycle capability. Changes are incremental and consistent with the CANDU 6 project approach. The EC6 utilizes modern computers and a distributed control system housed in an advanced control room which, along with automated testing and on-line diagnostics, make the plant easier and safer to operate, with minimal operator intervention. Containment and seismic capability are upgraded to meet modern standards. The first deployment of the EC6 is anticipated in Canada; international markets are also being pursued. AECL is performing a comprehensive review of the EC6 design in the wake of the Fukushima accident, will review lessons learned, and incorporate any necessary improvements into new build design. (author)

A Study on Partnering Mechanism in B to B EC Server for Global Supply Chain Management

Science.gov (United States)

Kaihara, Toshiya

B to B Electronic Commerce (EC) technology is now in progress and regarded as an information infrastructure for global business. As the number and diversity of EC participants grows at the agile environment, the complexity of purchasing from a vast and dynamic array of goods and services needs to be hidden from the end user. Putting the complexity into the EC system instead means providing flexible auction server for enabling commerce within different business units. Market mechanism could solve the product distribution problem in the auction server by allocating the scheduled resources according to market prices. In this paper, we propose a partnering mechanism for B to B EC with market-oriented programming that mediates amongst unspecified various companies in the trade, and demonstrate the applicability of the economic analysis to this framework after constructing a primitive EC server. The proposed mechanism facilitates sophisticated B to B EC, which conducts a Pareto optimal solution for all the participating business units in the coming agile era.

Expression of Finger Millet EcDehydrin7 in Transgenic Tobacco Confers Tolerance to Drought Stress.

Science.gov (United States)

Singh, Rajiv Kumar; Singh, Vivek Kumar; Raghavendrarao, Sanagala; Phanindra, Mullapudi Lakshmi Venkata; Venkat Raman, K; Solanke, Amolkumar U; Kumar, Polumetla Ananda; Sharma, Tilak Raj

2015-09-01

One of the critical alarming constraints for agriculture is water scarcity. In the current scenario, global warming due to climate change and unpredictable rainfall, drought is going to be a master player and possess a big threat to stagnating gene pool of staple food crops. So it is necessary to understand the mechanisms that enable the plants to cope with drought stress. In this study, effort was made to prospect the role of EcDehydrin7 protein from normalized cDNA library of drought tolerance finger millet in transgenic tobacco. Biochemical and molecular analyses of T0 transgenic plants were done for stress tolerance. Leaf disc assay, seed germination test, dehydration assay, and chlorophyll estimation showed EcDehydrin7 protein directly link to drought tolerance. Northern and qRT PCR analyses shows relatively high expression of EcDehydrin7 protein compare to wild type. T0 transgenic lines EcDehydrin7(11) and EcDehydrin7(15) shows superior expression among all lines under study. In summary, all results suggest that EcDehydrin7 protein has a remarkable role in drought tolerance and may be used for sustainable crop breeding program in other food crops.

High field magnetisation studies in some rare earth based amorphous ribbons

Science.gov (United States)

Krishnan, R.; Lassri, H.; Driouch, L.

1995-02-01

We have carried out magnetisation studies at fields up to 20 T of melt spun amorphous Fe 72- xY xHo 8B 20 alloys. The approach to saturation for H ≤ 11 T has been analysed on the basis of Chudnovsky's model, and the exchange constant, random anisotropy etc. have been calculated. We have also extracted the local anisotropy from the coercivity.

Ecological audits under EC regulations: background and impact in practice

International Nuclear Information System (INIS)

Walther, T.

1995-01-01

There are publications discussing the practical aspects of the implementation of the EC Directive on ecological audits, but little has been published yet on the theoretical background of the directive. The contribution in hand is intended to elucidate the theoretical basis of this instrument in the context of the system of law, explains the term of ''sustainable development'' as a key term, and reveals problems encountered in the evaluation of environmental performance. This information will contribute to a better understanding of the meaning and purposes of the EC Directive, and will thus point out ways and means for direct implementation. (orig.) [de

Fluctuation fields and medium noise in CoCrTa and CoCrPt films

International Nuclear Information System (INIS)

Yamanaka, K.; Yamamoto, T.; Tanahashi, K.; Inaba, N.; Hosoe, Y.; Uesaka, Y.; Futamoto, M.

1995-01-01

The correlation between magnetic viscosity and medium noise in CoCrTa and CoCrPt longitudinal thin-film media was investigated by measuring the time dependence of the remanence coercivity H r and the read/write characteristics. The media were prepared by dc magnetron sputtering under various conditions. Fluctuation fields H f of the magnetic viscosity at H/H r =1 were obtained from the slopes of the H r versus ln t plots. The medium noise decreases with kT/H f (the product of activation volume and saturation magnetization per unit volume), and is independent of other magnetic properties, such as the coercivity and the remanent magnetization per unit area. The medium noise thus primarily depends on the size of the minimum unit of the magnetic moment in reversal. (orig.)

Synthesis, morphology and microstructure of pomegranate-like hematite ({alpha}-Fe{sub 2}O{sub 3}) superstructure with high coercivity

Energy Technology Data Exchange (ETDEWEB)

Tadic, Marin, E-mail: marint@vinca.rs [Condensed Matter Physics Laboratory, Vinca Institute, University of Belgrade, P.O. Box 522, 11001 Belgrade (Serbia); Citakovic, Nada [Military Academy, Generala Pavla Jurisica Sturma 33, University of Belgrade, 11000 Belgrade (Serbia); Panjan, Matjaz [Jozef Stefan Institute, Jamova 39, 1000 Ljubljana (Slovenia); Stanojevic, Boban [Vinca Institute of Nuclear Sciences, P.O. Box 522, 11001 Belgrade, University of Belgrade (Serbia); Markovic, Dragana [Condensed Matter Physics Laboratory, Vinca Institute, University of Belgrade, P.O. Box 522, 11001 Belgrade (Serbia); Jovanovic, Dorde [Center for Solid State Physics and New Materials, Institute of Physics, University of Belgrade, Pregrevica 118, 11080 Belgrade (Serbia); Spasojevic, Vojislav [Condensed Matter Physics Laboratory, Vinca Institute, University of Belgrade, P.O. Box 522, 11001 Belgrade (Serbia)

2012-12-05

Highlights: Black-Right-Pointing-Pointer We found superior magnetic properties of the hematite ({alpha}-Fe{sub 2}O{sub 3}). Black-Right-Pointing-Pointer TEM and HRTEM images show a pomegranate-like superstructure. Black-Right-Pointing-Pointer Magnetic measurements display high coercivity H{sub C} = 4350 Oe at the room temperature. - Abstract: We found novel and superior magnetic properties of the hematite ({alpha}-Fe{sub 2}O{sub 3}) that originate from an internal microstructure of particles and strong inter-particle interactions between nanocrystal sub-units. The hematite particles were synthesized by thermal decomposition of iron (III) nitrate without any template or surfactant. The purity, size, crystallinity, morphology, microstructure and magnetic features of the as-prepared particles were characterized by X-ray diffraction (XRD), scanning electron microscope (SEM), energy-dispersive X-ray spectroscopy (EDX), transmission electron microscopy (TEM), high resolution transmission electron microscopy (HRTEM), Raman spectroscopy (RS) and SQUID magnetometry. An XRD study reveals a pure phase of {alpha}-Fe{sub 2}O{sub 3} whereas TEM shows {alpha}-Fe{sub 2}O{sub 3} spheres with a diameter of about 150 nm. RS also shows high quality and purity of the sample. Moreover, TEM and HRTEM images show a pomegranate-like superstructure and evidence that the spherical particles are composed of individual well-crystallized nanoparticle sub-units (self-assembled nanoparticles) with a size of about 20 nm. Magnetic measurements display hysteretic behavior at the room temperature with remanent magnetization M{sub r} = 0.731 emu/g, saturation magnetization M{sub S} = 6.83 emu/g and coercivity H{sub C} = 4350 Oe, as well as the Morin transition at T{sub M} = 261 K. These results and comparison with those in the literature reveal that the sample has extremely high coercivity. The magnetic properties of the sample are discussed in relation to morphology, internal microstructure, surface

Upgrading from the Dicon Wiring Management system to IntEC at the Gentilly 2 station

International Nuclear Information System (INIS)

Theoret, P.A.

1995-01-01

The General Electric DICON Wiring Management system supplied to HQ during the construction of G2 is currently being replaced by the stand-alone version of the IntEC software developed by AECL. The reasons for replacing DICON and choosing lntEC are discussed. The different aspects of the two year DICON data conversion project are presented with the problems encountered and the means that were taken to resolve the problems. lntEC has shown our DICON data to be considerably more deficient than we had thought. This has increased the cost and the duration of the conversion process. However, correcting the errors during the conversion process provides us with much more accurate data. This should be viewed as an investment in configuration management. Many potential causes of future errors and potentially critical path delays have been removed. We have chosen to document the detailed procedures for the use of lntEC in our plant using a Windows Help File compiler. This also has been found to be extremely useful as a training tool as well as providing on-line help. The DICON data conversion into lntEC will not be completed until 1996. lntEC is not perfect. However, from what we have up to now, we are satisfied with the conviviality and efficiency of lntEC and with AECL's diligence in constantly aspiring in making it a better product. (author)

COERCIVE FORCE IN THE SYSTEM OF FERROMAGNETIC GRANULES FOR HALF METAL CrO2 WITH PERCOLATION CONDUCTIVITY

Directory of Open Access Journals (Sweden)

N. V. Dalakova

2017-10-01

Full Text Available Magnetic and magnetoresistive properties of several samples of compacted powders of ferromagnetic half-metal CrO2, consisting of needle-shaped or spherical nanoparticles coated with thin dielectric shells, were investigated in wide temperature range. The temperature dependence of the coercive force Hc(T is compared with the temperature dependence of the field of maximum of positive tunneling magnetoresistance Hp(T. The dependence of Hp(T was nonmonotonic one. It is found that in the low-temperature range (4.2 ÷ 70 K the ratio Hp ≈ Hc, expected for compacted ferromagnetic powders with particles of submicron sizes, does not fulfilled. It is assumed that the possible reason of the difference between Hp and Hc is the mismatch between the orientation of the global magnetization of the entire sample and the orientations of the magnetic moments in some part of granules that form the optimal conducting channels at low temperatures. Such a mismatch may be due to the multidomain granules are more prone to the formation of optimal conducting chains in the transport channels. That leads to a change in the mechanism of magnetization reversal in these channels and to violation of the ratio Hp ≈ Hc.

Stabilization of the high coercivity ε-Fe2O3 phase in the CeO2–Fe2O3/SiO2 nanocomposites

International Nuclear Information System (INIS)

Mantlikova, A.; Poltierova Vejpravova, J.; Bittova, B.; Burianova, S.; Niznansky, D.; Ardu, A.; Cannas, C.

2012-01-01

We have investigated the processes leading to the formation of the Fe 2 O 3 and CeO 2 nanoparticles in the SiO 2 matrix in order to stabilize the ε-Fe 2 O 3 as the major phase. The samples with two different concentrations of the Fe were prepared by sol–gel method, subsequently annealed at different temperatures up to 1100 °C, and characterized by the Mössbauer spectroscopy, Transmission Electron Microscopy (TEM), Powder X-ray Diffraction (PXRD), Energy Dispersive X-ray analysis (EDX) and magnetic measurements. The evolution of the different Fe 2 O 3 phases under various conditions of preparation was investigated, starting with the preferential appearance of the γ-Fe 2 O 3 phase for the sample with low Fe concentration and low annealing temperature and stabilization of the major ε-Fe 2 O 3 phase for high Fe concentration and high annealing temperature, coexisting with the most stable α-Fe 2 O 3 phase. A continuous increase of the particle size of the CeO 2 nanocrystals with increasing annealing temperature was also observed. - Graphical abstract: The graphical abstract displays the most important results of our work. The significant change of the phase composition due to the variation of preparation conditions is demonstrated. As a result, significant change of the magnetic properties from superparamagnetic γ-Fe 2 O 3 phase with negligible coercivity to the high coercivity ε-Fe 2 O 3 phase has been observed. Highlights: ► Research of the stabilization of the high coercivity ε-Fe 2 O 3 in CeO 2 –Fe 2 O 3 /SiO 2 . ► Samples with two different concentrations of Fe and three annealing temperatures. ► Phase transition γ→ε→(β)→α with increasing annealing temperature and particle size. ► Elimination of the superparamagnetic phases in samples with higher content of Fe. ► Best conditions for high coercivity ε-Fe 2 O 3 —higher Fe content and T A =1100°C.

Predicting family health and well-being after separation from an abusive partner: role of coercive control, mother's depression and social support.

Science.gov (United States)

Broughton, Sharon; Ford-Gilboe, Marilyn

2017-08-01

Drawing on the Strengthening Capacity to Limit Intrusion theory, we tested whether intrusion (i.e. unwanted interference from coercive control, custody and access difficulties and mother's depressive symptoms) predicted family health and well-being after separation from an abusive partner/father, and whether social support moderated intrusion effects on family health and well-being. Experiences of coercive control and the negative consequences related to those experiences have been documented among women who have separated from an abusive partner. We conducted a secondary analysis of data from 154 adult, Canadian mothers of dependent children who had separated from an abusive partner and who participated in Wave 2 of the Women's Health Effects Study. We used hierarchical multiple regression to test whether intrusion predicts family health and well-being as well as whether social support moderated this relationship. Families were found to experience considerable intrusion, yet their health and well-being was similar to population norms. Intrusion predicted 11·4% of the variance in family health and well-being, with mother's depressive symptoms as the only unique predictor. Social support accounted for an additional 9% of explained variance, but did not buffer intrusion effects on family health and well-being. Although women had been separated from their abusive partners for an average of 2·5 years, the majority continued to experience coercive control. On average, levels of social support and family functioning were relatively high, contrary to public and academic discourse. In working with these families postseparation, nurses should approach care from a strength-based perspective, and integrate tailored assessment and intervention options for women and families that address both depression and social support. © 2016 John Wiley & Sons Ltd.

MoisturEC: a new R program for moisture content estimation from electrical conductivity data

Science.gov (United States)

Terry, Neil; Day-Lewis, Frederick D.; Werkema, Dale D.; Lane, John W.

2018-01-01

Noninvasive geophysical estimation of soil moisture has potential to improve understanding of flow in the unsaturated zone for problems involving agricultural management, aquifer recharge, and optimization of landfill design and operations. In principle, several geophysical techniques (e.g., electrical resistivity, electromagnetic induction, and nuclear magnetic resonance) offer insight into soil moisture, but data‐analysis tools are needed to “translate” geophysical results into estimates of soil moisture, consistent with (1) the uncertainty of this translation and (2) direct measurements of moisture. Although geostatistical frameworks exist for this purpose, straightforward and user‐friendly tools are required to fully capitalize on the potential of geophysical information for soil‐moisture estimation. Here, we present MoisturEC, a simple R program with a graphical user interface to convert measurements or images of electrical conductivity (EC) to soil moisture. Input includes EC values, point moisture estimates, and definition of either Archie parameters (based on experimental or literature values) or empirical data of moisture vs. EC. The program produces two‐ and three‐dimensional images of moisture based on available EC and direct measurements of moisture, interpolating between measurement locations using a Tikhonov regularization approach.

Effects of electric field on the fracture toughness (KIc) of ceramic PZT

International Nuclear Information System (INIS)

Goljahi, Sam; Lynch, Christopher S

2013-01-01

This work was motivated by the observation that a small percentage of the ceramic lead zirconate titanate (PZT) parts in a device application, one that requires an electrode pattern on the PZT surface, developed fatigue cracks at the edges of the electrodes; yet all of the parts were subjected to similar loading. To obtain additional information on the fracture behavior of this material, similar specimens were run at higher voltage in the laboratory under a microscope to observe the initiation and growth of the fatigue cracks. A sequence of experiments was next performed to determine whether there were fracture toughness variations that depended on material processing. Plates were cut from a single bar in different locations and the Vickers indentation technique was used to measure the relative fracture toughness as a function of position along the bar. Small variations in toughness were found, that may account for some of the devices developing fatigue cracks and not others. Fracture toughness was measured next as a function of electric field. The surface crack in flexure technique was modified to apply an electric field perpendicular to a crack. The results indicate that the fracture toughness drops under a positive electric field and increases under a negative electric field that is less than the coercive field, but as the negative coercive field is approached the fracture toughness drops. Examination of the fracture surfaces using an optical microscope and a surface profilometer reveal the initial indentation crack shape and (although less accurately) the crack shape and size at the transition from stable to unstable growth. These results are discussed in terms of a ferroelastic toughening mechanism that is dependent on electric field. (paper)

Effects of electric field on the fracture toughness (KIc) of ceramic PZT

Science.gov (United States)

Goljahi, Sam; Lynch, Christopher S.

2013-09-01

This work was motivated by the observation that a small percentage of the ceramic lead zirconate titanate (PZT) parts in a device application, one that requires an electrode pattern on the PZT surface, developed fatigue cracks at the edges of the electrodes; yet all of the parts were subjected to similar loading. To obtain additional information on the fracture behavior of this material, similar specimens were run at higher voltage in the laboratory under a microscope to observe the initiation and growth of the fatigue cracks. A sequence of experiments was next performed to determine whether there were fracture toughness variations that depended on material processing. Plates were cut from a single bar in different locations and the Vickers indentation technique was used to measure the relative fracture toughness as a function of position along the bar. Small variations in toughness were found, that may account for some of the devices developing fatigue cracks and not others. Fracture toughness was measured next as a function of electric field. The surface crack in flexure technique was modified to apply an electric field perpendicular to a crack. The results indicate that the fracture toughness drops under a positive electric field and increases under a negative electric field that is less than the coercive field, but as the negative coercive field is approached the fracture toughness drops. Examination of the fracture surfaces using an optical microscope and a surface profilometer reveal the initial indentation crack shape and (although less accurately) the crack shape and size at the transition from stable to unstable growth. These results are discussed in terms of a ferroelastic toughening mechanism that is dependent on electric field.

Application of the EC eco-audit regulation in the energy industry

International Nuclear Information System (INIS)

Schulz, J.

1994-01-01

The eco-audit regulation isolates the precision of goals to improve operational environmental protection for observation, particularly with a view to the industrial energy economy. It is not wise without an investigation into the possible repercussions with other EU and national regulatory laws. Keywords here are: design of a heat application regulation according to the BImSchG, discussion over the introduction of an EC CO 2 Energy tax as well as the EC guidelines on reducing CO 2 emissions (SAVE). (orig./HP) [de

Influence of Magnetic Field Decay on Electron Capture in Magnetars ...

Indian Academy of Sciences (India)

Abstract. The de-excited energy of electron capture (EC) induced by magnetic field decay may be a new source for heating magnetar crust, so we do a quantitative calculation on EC process near the outer crust and analyse their influence on persistent X-ray radiation of magnetars, adopt- ing the experimental data or the ...

Inactivation of the Ecs ABC transporter of Staphylococcus aureus attenuates virulence by altering composition and function of bacterial wall.

Directory of Open Access Journals (Sweden)

Ing-Marie Jonsson

2010-12-01

Full Text Available Ecs is an ATP-binding cassette (ABC transporter present in aerobic and facultative anaerobic gram-positive Firmicutes. Inactivation of Bacillus subtilis Ecs causes pleiotropic changes in the bacterial phenotype including inhibition of intramembrane proteolysis. The molecule(s transported by Ecs is (are still unknown.In this study we mutated the ecsAB operon in two Staphylococcus aureus strains, Newman and LS-1. Phenotypic and functional characterization of these Ecs deficient mutants revealed a defect in growth, increased autolysis and lysostaphin sensitivity, altered composition of cell wall proteins including the precursor form of staphylokinase and an altered bacterial surface texture. DNA microarray analysis indicated that the Ecs deficiency changed expression of the virulence factor regulator protein Rot accompanied by differential expression of membrane transport proteins, particularly ABC transporters and phosphate-specific transport systems, protein A, adhesins and capsular polysaccharide biosynthesis proteins. Virulence of the ecs mutants was studied in a mouse model of hematogenous S. aureus infection. Mice inoculated with the ecs mutant strains developed markedly milder infections than those inoculated with the wild-type strains and had consequently lower mortality, less weight loss, milder arthritis and decreased persistence of staphylococci in the kidneys. The ecs mutants had higher susceptibility to ribosomal antibiotics and plant alkaloids chelerythrine and sanguinarine.Our results show that Ecs is essential for staphylococcal virulence and antimicrobial resistance probably since the transport function of Ecs is essential for the normal structure and function of the cell wall. Thus targeting Ecs may be a new approach in combating staphylococcal infection.

Inactivation of the Ecs ABC transporter of Staphylococcus aureus attenuates virulence by altering composition and function of bacterial wall.

Science.gov (United States)

Jonsson, Ing-Marie; Juuti, Jarmo T; François, Patrice; AlMajidi, Rana; Pietiäinen, Milla; Girard, Myriam; Lindholm, Catharina; Saller, Manfred J; Driessen, Arnold J M; Kuusela, Pentti; Bokarewa, Maria; Schrenzel, Jacques; Kontinen, Vesa P

2010-12-02

Ecs is an ATP-binding cassette (ABC) transporter present in aerobic and facultative anaerobic gram-positive Firmicutes. Inactivation of Bacillus subtilis Ecs causes pleiotropic changes in the bacterial phenotype including inhibition of intramembrane proteolysis. The molecule(s) transported by Ecs is (are) still unknown. In this study we mutated the ecsAB operon in two Staphylococcus aureus strains, Newman and LS-1. Phenotypic and functional characterization of these Ecs deficient mutants revealed a defect in growth, increased autolysis and lysostaphin sensitivity, altered composition of cell wall proteins including the precursor form of staphylokinase and an altered bacterial surface texture. DNA microarray analysis indicated that the Ecs deficiency changed expression of the virulence factor regulator protein Rot accompanied by differential expression of membrane transport proteins, particularly ABC transporters and phosphate-specific transport systems, protein A, adhesins and capsular polysaccharide biosynthesis proteins. Virulence of the ecs mutants was studied in a mouse model of hematogenous S. aureus infection. Mice inoculated with the ecs mutant strains developed markedly milder infections than those inoculated with the wild-type strains and had consequently lower mortality, less weight loss, milder arthritis and decreased persistence of staphylococci in the kidneys. The ecs mutants had higher susceptibility to ribosomal antibiotics and plant alkaloids chelerythrine and sanguinarine. Our results show that Ecs is essential for staphylococcal virulence and antimicrobial resistance probably since the transport function of Ecs is essential for the normal structure and function of the cell wall. Thus targeting Ecs may be a new approach in combating staphylococcal infection.

Effect of shell thickness on the exchange bias blocking temperature and coercivity in Co-CoO core-shell nanoparticles

Science.gov (United States)

Thomas, S.; Reethu, K.; Thanveer, T.; Myint, M. T. Z.; Al-Harthi, S. H.

2017-08-01

The exchange bias blocking temperature distribution of naturally oxidized Co-CoO core-shell nanoparticles exhibits two distinct signatures. These are associated with the existence of two magnetic entities which are responsible for the temperature dependence of an exchange bias field. One is from the CoO grains which undergo thermally activated magnetization reversal. The other is from the disordered spins at the Co-CoO interface which exhibits spin-glass-like behavior. We investigated the oxide shell thickness dependence of the exchange bias effect. For particles with a 3 nm thick CoO shell, the predominant contribution to the temperature dependence of exchange bias is the interfacial spin-glass layer. On increasing the shell thickness to 4 nm, the contribution from the spin-glass layer decreases, while upholding the antiferromagnetic grain contribution. For samples with a 4 nm CoO shell, the exchange bias training was minimal. On the other hand, 3 nm samples exhibited both the training effect and a peak in coercivity at an intermediate set temperature Ta. This is explained using a magnetic core-shell model including disordered spins at the interface.

Low coercive field and conducting nanocomposite formed by Fe3O4 and poly(thiophene)

International Nuclear Information System (INIS)

Silva, R.A.; Santos, M.J.L.; Rinaldi, A.W.; Zarbin, A.J.G.; Oliveira, M.M.; Santos, I.A.; Cotica, L.F.; Coellho, A.A.; Rubira, A.F.; Girotto, E.M.

2007-01-01

Magnetite and poly(thiophene) composites have been produced by in situ monomer oxidation. Fourier transform infrared (FTIR) and X-ray diffraction (XRD) confirmed the presence of Fe 3 O 4 as particle agglomerates ranging from 15 to ca. 54 nm in size. Transmission electron micrographs (TEMs) revealed a face-to-face structure in both the pure magnetite and the nanocomposite. Typical superparamagnetic (ferrimagnetic) curves have been observed, whereas the relatively weak magnetic field employed in measurement, 200 Oe, was sufficient to split the curves completely. Zero field cooling (ZFC) and field cooling (FC) curves coincide only above room temperature, indicating that the characteristic blocking temperature (T B ) for superparamagnetic particles in this assembly is above room temperature. - Graphical abstract: TEM image of magnetite/poly(thiophene) nanocomposite

Usefulness of L,L-ethylenedicysteine - 99mTc complex (EC-99mTc) for the kidney investigations

International Nuclear Information System (INIS)

Surma, M.J.; Wiewiora, J.; Kapuscinksi, J.; Liniecki, J.

1992-01-01

To assess the usefulness of own EC- 99m Tc complex for the kidney function examination, the renoscintigraphy with EC- 99m Tc and clearance determinations were performed. During renoscintigraphy the kidney images were of superb quality, with overlaying organs (liver, spleen) not visualized. Renograms showed typical shapes, their TMAX and T1/2 values being insignificantly different from the obtained with other radiopharmaceuticals, used in renoscintigraphy (MAG 3 , hippuran). Very strict correlations were found between values of EC- 99m Tc and OIH- 131 I clearances (r=0.91) and excretion rate constants (r=0.92) of both radiopharmaceuticals. The correlation enabled formulation of an equation by which ERPF could be established from EC- 99m Tc clearance: ERPF OIH =1.245 x Cl EC +51.52. On the basis of this equation a lower boundary of the normal EC- 99m Tc clearance was established; it amounts to 300 ml/min/1.73 m 2 . (author). 17 refs, 5 figs, 1 tab

Electric field tuning of magnetism in heterostructure of yttrium iron garnet film/lead magnesium niobate-lead zirconate titanate ceramic

Science.gov (United States)

Lian, Jianyun; Ponchel, Freddy; Tiercelin, Nicolas; Chen, Ying; Rémiens, Denis; Lasri, Tuami; Wang, Genshui; Pernod, Philippe; Zhang, Wenbin; Dong, Xianlin

2018-04-01

In this paper, the converse magnetoelectric (CME) effect by electric field tuning of magnetization in an original heterostructure composed of a polycrystalline yttrium iron garnet (YIG) film and a lead magnesium niobate-lead zirconate titanate (PMN-PZT) ceramic is presented. The magnetic performances of the YIG films with different thicknesses under a DC electric field applied to the PMN-PZT ceramics and a bias magnetic field are investigated. All the magnetization-electric field curves are found to be in good agreement with the butterfly like strain curve of the PMN-PZT ceramic. Both the sharp deformation of about 2.5‰ of PMN-PZT and the easy magnetization switching of YIG are proposed to be the reasons for the strongest CME interaction in the composite at the small electric coercive field of PMN-PZT (4.1 kV/cm) and the small magnetic coercive field of YIG (20 Oe) where the magnetic susceptibility reaches its maximum value. A remarkable CME coefficient of 3.1 × 10-7 s/m is obtained in the system with a 600 nm-thick YIG film. This heterostructure combining multiferroics and partially magnetized ferrite concepts is able to operate under a small or even in the absence of an external bias magnetic field and is more compact and power efficient than the traditional magnetoelectric devices.

Spatial and Temporal Variations of EC and OC Aerosol Combustion Sources in a Polluted Metropolitan Area

Science.gov (United States)

Mouteva, G.; Randerson, J. T.; Fahrni, S.; Santos, G.; Bush, S. E.; Ehleringer, J. R.; Czimczik, C. I.

2015-12-01

Anthropogenic emissions of carbonaceous aerosols are a major component of fine air particulate matter (PM2.5) in polluted metropolitan areas and in the global atmosphere. Elemental (EC) and organic carbon (OC) aerosols influence Earth's energy balance by means of direct and indirect pathways and EC has been suggested as a better indicator of public health impacts from combustion-related sources than PM mass. Quantifying the contribution of fossil fuel and biomass combustion to the EC and OC emissions and their temporal and spatial variations is critical for developing efficient legislative air pollution control measures and successful climate mitigation strategies. In this study, we used radiocarbon (14C) to separate and quantify fossil and biomass contributions to a time series of EC and OC collected at 3 locations in Salt Lake City (SLC). Aerosol samples were collected on quartz fiber filters and a modified OC/EC analyzer was used with the Swiss_4S protocol to isolate and trap the EC fraction. Together with the total carbon (TC) content of the samples, the EC was analyzed for its 14C content with accelerator mass spectrometry. The 14C of OC was derived as a mass balance difference between TC and EC. EC had an annual average fraction modern of 0.13±0.06 and did not vary significantly across seasons. OC had an annual average FM of 0.49±0.13, with the winter mean (0.43±0.11) lower than the summer mean (0.64±0.13) at the 5% significance level. While the 3 stations were chosen to represent a variety of environmental conditions within SLC, no major differences in this source partitioning were observed between stations. During winter, the major sources of air pollutants in SLC are motor vehicles and wood stove combustion and determining their relative contributions has been the subject of debate. Our results indicated that fossil fuels were the dominant source of carbonaceous aerosols during winter, contributing 87% or more of the total EC mass and 40-75% of the OC

MoisturEC: A New R Program for Moisture Content Estimation from Electrical Conductivity Data.

Science.gov (United States)

Terry, Neil; Day-Lewis, Frederick D; Werkema, Dale; Lane, John W

2018-03-06

Noninvasive geophysical estimation of soil moisture has potential to improve understanding of flow in the unsaturated zone for problems involving agricultural management, aquifer recharge, and optimization of landfill design and operations. In principle, several geophysical techniques (e.g., electrical resistivity, electromagnetic induction, and nuclear magnetic resonance) offer insight into soil moisture, but data-analysis tools are needed to "translate" geophysical results into estimates of soil moisture, consistent with (1) the uncertainty of this translation and (2) direct measurements of moisture. Although geostatistical frameworks exist for this purpose, straightforward and user-friendly tools are required to fully capitalize on the potential of geophysical information for soil-moisture estimation. Here, we present MoisturEC, a simple R program with a graphical user interface to convert measurements or images of electrical conductivity (EC) to soil moisture. Input includes EC values, point moisture estimates, and definition of either Archie parameters (based on experimental or literature values) or empirical data of moisture vs. EC. The program produces two- and three-dimensional images of moisture based on available EC and direct measurements of moisture, interpolating between measurement locations using a Tikhonov regularization approach. Published 2018. This article is a U.S. Government work and is in the public domain in the USA.

Magnetic and microstructural investigation of high-coercivity net-shape Nd–Fe–B-type magnets produced from spark-plasma-sintered melt-spun ribbons blended with DyF{sub 3}

Energy Technology Data Exchange (ETDEWEB)

Žagar, Kristina, E-mail: kristina.zagar@ijs.si; Kocjan, Andraž; Kobe, Spomenka

2016-04-01

Nanostructured Nd–Fe–B-type materials produced by melt-spinning (MS) are used in a variety of applications in the electronics, automotive, and sensor industries. The very rapid MS process leads to flake-like powders with metastable, nanoscale, Nd{sub 2}Fe{sub 14}B grains. These powders are then formed into net-shaped, isotropic, polymer-bonded magnets, or they are hot formed into fully dense, metallic magnets that are isotropic and anisotropic. These fully dense magnets are usually produced with a conventional hot press without the inclusion of additives prior to the hot pressing. As a result, their properties, particularly the coercivity (H{sub ci}), are insufficient at automotive-relevant temperatures of 100–150 °C since the material H{sub ci} has a large temperature coefficient. In this study, we instead add a thin layer of DyF{sub 3} to the melt-spun ribbons prior to their hot consolidation in order to enhance the coercivity through a diffusion-based, partial substitution of the Nd by Dy. This is accomplished by applying extremely rapid, spark-plasma sintering to minimize any growth of the nanoscale Nd{sub 2}Fe{sub 14}B grains during consolidation. The result is a very high-coercivity magnet with drastically reduced amounts of heavy rare earths that is suitable for high-temperature applications. This work clearly demonstrates how rapidly formed, metastable states can provide us with properties that are unobtainable with conventional techniques. - Highlights: • We produced high coercivity magnets with drastically reduced amounts of HRE. • Microstructural analysis was conducted of the “free” and “wheel” side of Dy-treated Nd{sub 2}Fe{sub 14}B ribbons. • Dy-diffusion mechanism into ribbons depending on processing parameters is shown.

Coercivity enhancement of NdFeB sintered magnets by low melting point Dy{sub 32.5}Fe{sub 62}Cu{sub 5.5} alloy modification

Energy Technology Data Exchange (ETDEWEB)

Liang, Liping; Ma, Tianyu, E-mail: maty@zju.edu.cn; Zhang, Pei; Jin, Jiaying; Yan, Mi, E-mail: mse_yanmi@zju.edu.cn

2014-04-15

To improve coercivity without sacrificing other magnetic performance of NdFeB sintered magnets, a low melting point Dy{sub 32.5}Fe{sub 62}Cu{sub 5.5} alloy was introduced as an intergranular additive. Magnetic properties and microstructure of the magnets with different Dy{sub 32.5}Fe{sub 62}Cu{sub 5.5} contents were studied. At the optimum addition of 3 wt%, coercivity H{sub cj} was enhanced from 12.7 to 15.2 kOe, the maximum magnetic energy product (BH){sub max} was simultaneously increased from 46.6 to 47.8 MG Oe, accompanied by a slight reduction in remanence B{sub r}. Further investigation on microstructure and grain boundary composition indicated that the enhanced H{sub cj} and (BH){sub max} could be attributed to the refined and uniform 2:14:1 phase grains, continuous grain boundaries and a (Nd,Dy){sub 2}Fe{sub 14}B hardening shell surrounding the 2:14:1 phase grains. - Highlights: • Low melting-point Dy{sub 32.5}Fe{sub 62}Cu{sub 5.5} alloy was introduced to NdFeB magnets. • The doped magnet exhibits enhanced coercivity and maximum energy product. • (Nd,Dy){sub 2}Fe{sub 14}B shell was expected to form in the surface of Nd{sub 2}Fe{sub 14}B grains. • The continuous grain boundary layer formed between neighboring Nd{sub 2}Fe{sub 14}B grains.

Spin-resolved tunneling studies of the exchange field in EuS/Al bilayers.

Science.gov (United States)

Xiong, Y M; Stadler, S; Adams, P W; Catelani, G

2011-06-17

We use spin-resolved electron tunneling to study the exchange field in the Al component of EuS/Al bilayers, in both the superconducting and normal-state phases of the Al. Contrary to expectation, we show that the exchange field H(ex) is a nonlinear function of applied field, even in applied fields that are well beyond the EuS coercive field. Furthermore, the magnitude H(ex) is unaffected by the superconducting phase. In addition, H(ex) decreases significantly with increasing temperature in the temperature range of 0.1-1 K. We discuss these results in the context of recent theories of generalized spin-dependent boundary conditions at a superconductor-ferromagnet interface.

Effects of Sludge Compost on EC value of Saline Soil and Plant Height of Medicago

Science.gov (United States)

Sun, Chongyang; Zhao, Ke; Chen, Xing; Wang, Xiaohui

2017-12-01

In this study, the effects of sludge composting on the EC value of saline soil and the response to Medicago plant height were studied by planting Medicago with pots for 45 days in different proportions as sludge composting with saline soil. The results showed that the EC value of saline soil did not change obviously with the increase of fertilization ratio,which indicated that the EC value of saline soil was close to that of the original soil. The EC decreased by 31.45% at fertilization ratio of 40%. The height of Medicago reached the highest at 40% fertilization ratio, and that was close to 60% fertilization ratio, and the difference was significant with other treatments. By comprehensive analyse and compare,the optimum application rate of sludge compost was 40% under this test condition.

GPM GROUND VALIDATION ENVIRONMENT CANADA (EC) RADIOSONDE GCPEX V1

Data.gov (United States)

National Aeronautics and Space Administration — The GPM Ground Validation Environment Canada (EC) Radiosonde GCPEx dataset provides measurements of pressure, temperature, humidity, and winds collected by Vaisala...

EC assisted start-up experiments reproduction in FTU and AUG for simulations of the ITER case

Energy Technology Data Exchange (ETDEWEB)

Granucci, G.; Ricci, D.; Farina, D.; Figini, L. [Associazione EURATOM-ENEA sulla Fusione, IFP-CNR, Via R. Cozzi 53, 20125 Milano (Italy); Cavinato, M. [F4E C/Josep Pla2, Torres Diagonal Litoral - Building 83 08019 Barcelona (Spain); Mattei, M. [CREATE via Claudio 21, 80125 Napoli (Italy); Stober, J. [Max-Planck-Institut für Plasmaphysik, EURATOM Association, Boltzmannstr. 2, 85748 Garching bei München (Germany); Tudisco, O. [Associazione EURATOM-ENEA sulla Fusione, C.R. Frascati, Via E. Fermi 45, 00044 Frascati (Roma) (Italy)

2014-02-12

The breakdown and plasma start-up in ITER are well known issues studied in the last few years in many tokamaks with the aid of calculation based on simplified modeling. The thickness of ITER metallic wall and the voltage limits of the Central Solenoid Power Supply strongly limit the maximum toroidal electric field achievable (0.3 V/m), well below the level used in the present generation of tokamaks. In order to have a safe and robust breakdown, the use of Electron Cyclotron Power to assist plasma formation and current rump up has been foreseen. This has raised attention on plasma formation phase in presence of EC wave, especially in order to predict the required power for a robust breakdown in ITER. Few detailed theory studies have been performed up to nowadays, due to the complexity of the problems. A simplified approach, extended from that proposed in ref[1] has been developed including a impurity multispecies distribution and an EC wave propagation and absorption based on GRAY code. This integrated model (BK0D) has been benchmarked on ohmic and EC assisted experiments on FTU and AUG, finding the key aspects for a good reproduction of data. On the basis of this, the simulation has been devoted to understand the best configuration for ITER case. The dependency of impurity distribution content and neutral gas pressure limits has been considered. As results of the analysis a reasonable amount of power (1 - 2 MW) seems to be enough to extend in a significant way the breakdown and current start up capability of ITER. The work reports the FTU data reproduction and the ITER case simulations.

Topology optimization of reduced rare-earth permanent magnet arrays with finite coercivity

Science.gov (United States)

Teyber, R.; Trevizoli, P. V.; Christiaanse, T. V.; Govindappa, P.; Rowe, A.

2018-05-01

The supply chain risk of rare-earth permanent magnets has yielded research efforts to improve both materials and magnetic circuits. While a number of magnet optimization techniques exist, literature has not incorporated the permanent magnet failure process stemming from finite coercivity. To address this, a mixed-integer topology optimization is formulated to maximize the flux density of a segmented Halbach cylinder while avoiding permanent demagnetization. The numerical framework is used to assess the efficacy of low-cost (rare-earth-free ferrite C9), medium-cost (rare-earth-free MnBi), and higher-cost (Dy-free NdFeB) permanent magnet materials. Novel magnet designs are generated that produce flux densities 70% greater than the segmented Halbach array, albeit with increased magnet mass. Three optimization formulations are then explored using ferrite C9 that demonstrates the trade-off between manufacturability and design sophistication, generating flux densities in the range of 0.366-0.483 T.

τ-MnAl with high coercivity and saturation magnetization

Directory of Open Access Journals (Sweden)

J. Z. Wei

2014-12-01

Full Text Available In this paper, high purity τ-Mn54Al46 and Mn54−xAl46Cxalloys were successfully prepared using conventional arc-melting, melt-spinning, and heat treatment process. The magnetic and the structural properties were examined using x-ray diffraction (XRD, powder neutron diffraction and magnetic measurements. A room temperature saturation magnetization of 650.5 kAm-1, coercivity of 0.5 T, and a maximum energy product of (BHmax = 24.7 kJm-3 were achieved for the pure Mn54Al46 powders without carbon doping. The carbon substituted Mn54−xAl46Cx, however, reveals a lower Curie temperature but similar saturation magnetization as compared to the carbon-free sample. The electronic structure of MnAl shows that the Mn atom possesses a magnetic moment of 2.454 μB which results from strong hybridization between Mn-Al and Mn-Mn. We also investigated the volume and c/a ratio dependence of the magnetic moments of Mn and Al. The results indicate that an increase in the intra-atomic exchange splitting due to the cell volume expansion, leads to a large magnetic moment for the Mn atom. The Mn magnetic moment can reach a value of 2.9 μB at a volume expansion rate of ΔV/V ≈ 20%.

On the robustness of EC-PC spike detection method for online neural recording.

Science.gov (United States)

Zhou, Yin; Wu, Tong; Rastegarnia, Amir; Guan, Cuntai; Keefer, Edward; Yang, Zhi

2014-09-30

Online spike detection is an important step to compress neural data and perform real-time neural information decoding. An unsupervised, automatic, yet robust signal processing is strongly desired, thus it can support a wide range of applications. We have developed a novel spike detection algorithm called "exponential component-polynomial component" (EC-PC) spike detection. We firstly evaluate the robustness of the EC-PC spike detector under different firing rates and SNRs. Secondly, we show that the detection Precision can be quantitatively derived without requiring additional user input parameters. We have realized the algorithm (including training) into a 0.13 μm CMOS chip, where an unsupervised, nonparametric operation has been demonstrated. Both simulated data and real data are used to evaluate the method under different firing rates (FRs), SNRs. The results show that the EC-PC spike detector is the most robust in comparison with some popular detectors. Moreover, the EC-PC detector can track changes in the background noise due to the ability to re-estimate the neural data distribution. Both real and synthesized data have been used for testing the proposed algorithm in comparison with other methods, including the absolute thresholding detector (AT), median absolute deviation detector (MAD), nonlinear energy operator detector (NEO), and continuous wavelet detector (CWD). Comparative testing results reveals that the EP-PC detection algorithm performs better than the other algorithms regardless of recording conditions. The EC-PC spike detector can be considered as an unsupervised and robust online spike detection. It is also suitable for hardware implementation. Copyright © 2014 Elsevier B.V. All rights reserved.

Damage Detection Response Characteristics of Open Circuit Resonant (SansEC) Sensors

Science.gov (United States)

Dudley, Kenneth L.; Szatkowski, George N.; Smith, Laura J.; Koppen, Sandra V.; Ely, Jay J.; Nguyen, Truong X.; Wang, Chuantong; Ticatch, Larry A.; Mielnik, John J.

2013-01-01

The capability to assess the current or future state of the health of an aircraft to improve safety, availability, and reliability while reducing maintenance costs has been a continuous goal for decades. Many companies, commercial entities, and academic institutions have become interested in Integrated Vehicle Health Management (IVHM) and a growing effort of research into "smart" vehicle sensing systems has emerged. Methods to detect damage to aircraft materials and structures have historically relied on visual inspection during pre-flight or post-flight operations by flight and ground crews. More quantitative non-destructive investigations with various instruments and sensors have traditionally been performed when the aircraft is out of operational service during major scheduled maintenance. Through the use of reliable sensors coupled with data monitoring, data mining, and data analysis techniques, the health state of a vehicle can be detected in-situ. NASA Langley Research Center (LaRC) is developing a composite aircraft skin damage detection method and system based on open circuit SansEC (Sans Electric Connection) sensor technology. Composite materials are increasingly used in modern aircraft for reducing weight, improving fuel efficiency, and enhancing the overall design, performance, and manufacturability of airborne vehicles. Materials such as fiberglass reinforced composites (FRC) and carbon-fiber-reinforced polymers (CFRP) are being used to great advantage in airframes, wings, engine nacelles, turbine blades, fairings, fuselage structures, empennage structures, control surfaces and aircraft skins. SansEC sensor technology is a new technical framework for designing, powering, and interrogating sensors to detect various types of damage in composite materials. The source cause of the in-service damage (lightning strike, impact damage, material fatigue, etc.) to the aircraft composite is not relevant. The sensor will detect damage independent of the cause

Archive of Geosample Data and Information from the U.S. Extended Continental Shelf (ECS) Project.

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — Geological samples collected as part of the U.S. Extended Continental Shelf (ECS) Project are curated by the U.S. Geological Survey, a partner in the ECS Project. To...

Magnetic and microstructural investigation of high-coercivity net-shape Nd-Fe-B-type magnets produced from spark-plasma-sintered melt-spun ribbons blended with DyF3

Science.gov (United States)

Žagar, Kristina; Kocjan, Andraž; Kobe, Spomenka

2016-04-01

Nanostructured Nd-Fe-B-type materials produced by melt-spinning (MS) are used in a variety of applications in the electronics, automotive, and sensor industries. The very rapid MS process leads to flake-like powders with metastable, nanoscale, Nd2Fe14B grains. These powders are then formed into net-shaped, isotropic, polymer-bonded magnets, or they are hot formed into fully dense, metallic magnets that are isotropic and anisotropic. These fully dense magnets are usually produced with a conventional hot press without the inclusion of additives prior to the hot pressing. As a result, their properties, particularly the coercivity (Hci), are insufficient at automotive-relevant temperatures of 100-150 °C since the material Hci has a large temperature coefficient. In this study, we instead add a thin layer of DyF3 to the melt-spun ribbons prior to their hot consolidation in order to enhance the coercivity through a diffusion-based, partial substitution of the Nd by Dy. This is accomplished by applying extremely rapid, spark-plasma sintering to minimize any growth of the nanoscale Nd2Fe14B grains during consolidation. The result is a very high-coercivity magnet with drastically reduced amounts of heavy rare earths that is suitable for high-temperature applications. This work clearly demonstrates how rapidly formed, metastable states can provide us with properties that are unobtainable with conventional techniques.

ESCAPE: an integrated climate model for the EC

International Nuclear Information System (INIS)

Rotmans, J.

1992-01-01

A framework has been developed for the evaluation of policy options for climate change, called ESCAPE (Evaluation of Strategies to address Climate change by Adapting to and Preventing Emissions). ESCAPE consists of a suite of linked models which enables scenarios of greenhouse gas emissions to be constructed and their impact on global and regional climate and sea level and sectors of the European economy to be assessed. Conclusions resulting from simulations with the ESCAPE 1.1 model include: the major problem of a climate change for the EC is a sea level rise; Greece, Italy, Portugal and Spain will be faced with higher costs in the agricultural sector; worldwide implementation of an EC carbon tax leads to about 12% lower worldwide CO 2 emissions; to stabilize CO 2 emissions an Ecotax of 18 dollars per barrel would be required; and in all cases the rate of global temperature increase will be above the rate of 0.1 degree C per decade for the coming 40 years. 2 figs

Business-to-business electronic commerce systems and services. Smart EC solution; Kigyoka nrenkei system solution system. Smart EC solution

Energy Technology Data Exchange (ETDEWEB)

Setoguchi, T.; Manchu, Y.; Katsumata, M. [Toshiba Corp., Tokyo (Japan)

2000-04-01

Toshiba provides a range of information technology (IT) solutions called SmartEC Solution, which includes business-to-business electronic commerce systems and services based on international standards and industrial know-how, especially our electronic data interchange (EDI) know-how as a manufacturer. These IT solutions are supplied as services covering strategy planning, system integration, and application service provider based on five types of business-to-business electronic commerce. (author)

Lunar Module ECS (Environmental Control System) - Design Considerations and Failure Modes. Part 1

Science.gov (United States)

Interbartolo, Michael

2009-01-01

Design considerations and failure modes for the Lunar Module (LM) Environmental Control System (ECS) are described. An overview of the the oxygen supply and cabin pressurization, atmosphere revitalization, water management and heat transport systems are provided. Design considerations including reliability, flight instrumentation, modularization and the change to the use of batteries instead of fuel cells are discussed. A summary is provided for the LM ECS general testing regime.

Experimental Study on Performance of EC-120 Wet-mixing Modified Asphalt Cementing Materials%EC-120温拌改性沥青胶结料性能试验研究

Institute of Scientific and Technical Information of China (English)

周刚; 唐江; 谭昆华; 谭巍

2012-01-01

This paper carries out experimental study on rotational viscosity, normal performance indices and rheological properties, etc. of EC-120 organic viscosity reducing and wet-mixing modified asphalt, the experiment shows that EC-120 as an organic additive with the melting point at approximate 100 t is well compatible with asphalt and easy to prepare without problem of isolation. The experiment also shows EC-120 in wet-mixing modified asphalt can reduce high-temperature viscosity and increase medium and low-temperature viscosity of asphalt so as to decrease mixing and compacting temperature of asphalt mixtures; can reduce needle penetration and increase softening point and anti-rutting factor so as to improve high-temperature stability of asphalt remarkably; and will enable reduction of ductility, increase of fatigue factor, increase of creepage stiffness and reduction of deformation rate of wet-mixing modified asphalt, which slightly have negative influence on anti-fatigue and low-temperature cracking properties of asphalt.%对EC-120有机降粘温拌改性沥青进行旋转粘度、常规性能指标、流变特性等试验研究,试验表明,EC- 120作为一种熔点在100℃左右的有机添加剂,与沥青相容性好,制备容易,不存在离析问题.试验还表明在温拌改性沥青中,EC-120可降低沥青的高温粘度,提高中低温粘度,从而降低沥青混合料的拌和和压实温度;可降低沥青针入度,提高软化点和抗车辙因子,从而大幅改善沥青的高温稳定性;会使温拌改性沥青的延度降低,疲劳因子增大,蠕变劲度增大,变形速率减小,对沥青的抗疲劳和低温抗开裂性能略有消极影响.

Influence Of The Switching field On The Magnetization Process Thin Film Magneto optic

International Nuclear Information System (INIS)

Atmono, Tri Mardji

1996-01-01

The investigation of influence of switching field on the magnetic reversal process of bilayer Fe Tb/FeTbCo has been done. Thin film has been produced by sputtering method using mosaic target placed as cathode. The experiment shows that the interface wall between two layers is created due to the shifting of the switching field from the coercive force of the single layer. At the temperature of 26 o C, the special magnetization process accurst because the two layers have the same value of switching field : For the range of the magnetic field -3.8 kg o C o C. This mean that the compensation point lies in this temperature range

Normal human serum (HS) prevents oxidant-induced lysis of cultured endothelial cells (ECs)

International Nuclear Information System (INIS)

Callahan, K.S.; Harlan, J.M.

1986-01-01

Most studies demonstrating oxidant lysis of cultured ECs are performed in serum-free media or media containing low concentrations of bovine serum. The authors found that HS protects human and bovine ECs from lysis caused by reagent H 2 O 2 or glucose/glucose oxidase (GO)-generated H 2 O 2 . EC injury was assessed by 51 Cr release, cell detachment, or trypan blue dye exclusion. Protective HS activity was dose-dependent with concentrations greater than or equal to 25% preventing lethal injury. Cytotoxicity at 24 hrs, induced by 20 mU/ml GO, was 90.1 +/- 5.2% without HS vs 1.7 +/- 4.6% with 25% HS present (20 exp). Similar protection was observed with heparinized plasma. Of note, comparable concentrations of bovine serum were devoid of protective activity. Addition of fatty acid-free albumin to the media was also without protective effect. Preliminary characterization showed HS activity was stable to 60 0 C for 30 min, non-dialyzable at 25,000 MW cutoff, and retained in delipidated serum. The HS protection was not merely due to scavenging of exogenous H 2 O 2 as A23187-induced EC lysis was also prevented by HS. Protective activity was not reproduced by purified cerruloplasmin or transferrin. In conclusion, unidentified factor(s) present in HS protect cultured ECs from oxidant-induced lysis. Since endothelium is normally exposed to 100% plasma, the authors suggest that in vitro studies of oxidant-mediated injury be performed in the presence of HS. Factor(s) in HS may play an important role in modulating oxidant-induced vascular injury in vivo

Alternating current loss calculation in a high-TC superconducting transmission cable considering the magnetic field distribution

International Nuclear Information System (INIS)

Noji, H; Haji, K; Hamada, T

2003-01-01

We have calculated the alternating current (ac) losses of a 114 MVA high-T C superconducting (HTS) transmission cable using an electric-circuit (EC) model. The HTS cable is fabricated by Tokyo Electric Power Company and Sumitomo Electric Industries, Ltd. The EC model is comprised of a resistive part and an inductive part. The resistive part is obtained by the approximated Norris equation for a HTS tape. The Norris equation indicates hysteresis losses due to self-fields. The inductive part has two components, i.e. inductances related to axial fields and those related to circumferential fields. The layer currents and applied fields of each layer were calculated by the EC model. By using both values, the ac losses of the one-phase HTS cable were obtained by calculation considering the self-field, the axial field and the circumferential field of the HTS tape. The measured ac loss transporting 1 kA rms is 0.7 W m -1 ph -1 , which is equal to the calculation. The distribution of each layer loss resembles in shape the distribution of the circumferential field in each layer, which indicates that the circumferential fields strongly influence the ac losses of the HTS cable

Levitation performance of YBCO bulk in different applied magnetic fields

International Nuclear Information System (INIS)

Liu, W.; Wang, S.Y.; Jing, H.; Zheng, J.; Jiang, M.; Wang, J.S.

2008-01-01

The maglev performance of bulk high-T c superconductor (HTS) is investigated above three different types of permanent magnet guideways (PMGs). The main difference among these PMGs is the method used to concentrate the magnetic flux. The experimental results indicate that the levitation force depends only in part on the peak value of the magnetic field. The variation of the vertical component of the magnetic field (B z ), and the structure of the magnetic field are also responsible for the levitation force. These results imply that the permanent magnet with high coercive force is better at concentrating flux th an iron. The conclusions contribute in a very helpful way to the design and optimization of PMGs for HTS maglev systems

Levitation performance of YBCO bulk in different applied magnetic fields

Energy Technology Data Exchange (ETDEWEB)

Liu, W. [Applied Superconductivity Laboratory, Southwest Jiaotong University, Chengdu 610031 (China)], E-mail: asclab@asclab.cn; Wang, S.Y.; Jing, H.; Zheng, J.; Jiang, M.; Wang, J.S. [Applied Superconductivity Laboratory, Southwest Jiaotong University, Chengdu 610031 (China)

2008-07-01

The maglev performance of bulk high-T{sub c} superconductor (HTS) is investigated above three different types of permanent magnet guideways (PMGs). The main difference among these PMGs is the method used to concentrate the magnetic flux. The experimental results indicate that the levitation force depends only in part on the peak value of the magnetic field. The variation of the vertical component of the magnetic field (B{sub z}), and the structure of the magnetic field are also responsible for the levitation force. These results imply that the permanent magnet with high coercive force is better at concentrating flux th an iron. The conclusions contribute in a very helpful way to the design and optimization of PMGs for HTS maglev systems.

Estimation of the Ultimate Tensile Strength of Steel from Its HB and HV Hardness Numbers and Coercive Force

Science.gov (United States)

Sandomirskii, S. G.

2017-11-01

A formula is derived to accurately describe the tabulated relation between the Brinell ( HB) and Vickers ( HV) hardnesses of steel over the entire range of their possible variation. This formula and the formulas describing the relation between the HB hardness of chromium-molybdenum and chromium-nickel steels and their ultimate tensile strength σu are used to analyze the change in σu of 38KhNM steel upon quenching and tempering. The data that reveal a relation between σu of 38KhNM steel and its coercive force are obtained.

Dependence on relative magnitude of probe and coherent field

Indian Academy of Sciences (India)

the condition Ω ≫ G. Here, by using the exact analytical expressions of ... The presence of rotational and vibrational states makes the study of LWI/AWI ... Doppler free condition, keeping the absorption on the coherent field minimum. Here ... where Ec and Ep are the electric field for the coupling and probe fields respectively.

Less gastrointestinal toxicity after adjuvant radiotherapy on a small pelvic field compared to a standard pelvic field in patients with endometrial carcinoma

NARCIS (Netherlands)

de Jong, Renske A.; Pras, Elisabeth; Boezen, H. Marike; van der Zee, Ate G. J.; Mourits, Marian J. E.; Arts, Henriette J. G.; Aalders, Jan G.; Slot, Annerie; Timmer, Paul R.; Hollema, Harry; Nijman, Hans W.

Objective: Radiotherapy is associated with short-term and long-term morbidity. This study compared toxicity rates among patients with endometrial carcinoma (EC) treated with adjuvant external beam radiation therapy (EBRT) on a small pelvic field (SmPF) in comparison with a standard pelvic field

Development of EC technology in JAERI

International Nuclear Information System (INIS)

Sakamoto, Keishi; Takahashi, Koji; Kasugai, Atsushi; Hayashi, Kenichi; Ikeda, Yoshitaka; Kajiwara, Ken; Fujii, Tsuneyuki; Imai, Tsuyoshi; Kariya, Tsuyoshi; Mitsunaka, Yoshika

2003-01-01

Recent progress of electron cyclotron (EC) heating and current drive technologies in JAERI is reported. In 170 GHz gyrotron development, 0.9 MW/9.2 sec (efficiency: 43%), 0.5 MW/30 sec (46%), etc, have been demonstrated. As for 110 GHz gyrotron, 1 MW/5 sec and 1.2 MW/4.1 sec were obtained. Using four 110 GHz gyrotrons, a 3 MW power injection into JT- 60U plasma was carried out. In parallel, a launcher design and its development that includes neutron irradiation of the launcher components and a remote steering launcher are underway for ITER application. (authors)

Mechanical analysis of the EC upper launcher with respect to electromagnetic loads

International Nuclear Information System (INIS)

Vaccaro, A.; Kleefeldt, K.; Spaeh, P.; Strauss, D.

2009-01-01

The design of the EC upper launcher for ITER approaches maturity and thus it needs to be qualified with respect to the critical loads. One major source of critical loads are eddy currents, which are induced in the structure during plasma instabilities, of which the most severe conditions may happen during a vertical displacement event (VDE) followed by a fast current quench. High mechanical loads are then acting on the front end of the cantilevered launcher structure as a consequence of the interaction between the static toroidal field and the eddy currents. The EC upper launcher has a length of about 6 m and the nominal gap to the neighbouring components is 20 mm. The targeted limit for the launcher displacements is 10 mm, when accounting for tolerances in manufacturing, positioning and thermal displacement. The conceptual design of the launcher is at risk to miss this requirement, thus different configurations of the main frame are considered and analysed. Especially, the cross-section of the single wall segment has been varied to identify the most efficient strategy for increasing the stiffness of the structure. For this purpose, the mechanical loads from an upward VDE (linear current decay from 15 to 0 MA within 40 ms) are used as input to a finite element analysis with the ANSYS software tool. The displacement at the free plasma facing end of the launcher is calculated and analyzed. Its main component is in toroidal direction and the effort of mitigation is concentrated primarily on the bottom-wall. The approach satisfies the limitations given by the space requests of the mm-wave system which is to be integrated into the port plug.

SerpinE2, a poor biomarker of endometrial cancer, promotes the proliferation and mobility of EC cells.

Science.gov (United States)

Shen, Yuan; Wang, Xiaoyu; Xu, Jianping; Lu, Lin

2017-07-04

The SerpinE2 pathway is evolutionarily conserved and plays an important role in tumorigenesis. SerpinE2 (a small ubiquitin-related modifier), like ubiquitin, conjugates SerpinE2 proteins onto lysine residues of target proteins. SerpinE2 over-expression has been found in several tumors. Here, we detected the level of SerpinE2 in 72 samples of EC tissue using immunohistochemistry to assess the role of SerpinE2 in EC prognosis. Meanwhile, we knocked down SerpinE2 by siRNA in the HTB-111 and Ishikawa EC cell lines and analyzed the viability and mobility change using an MTT assay, an annexin V/PI apoptosis assay, a wound scratch test and a transwell assay. A Kaplan-Meier analysis indicated a negative correlation between the level of SerpinE2 and the EC prognosis. Silencing SerpinE2 induced cell apoptosis and reduced the migration ability. Our data suggest SerpinE2 works as an oncogene in EC.

PRODUCTION OF BACTERIOCIN EC2 AND ITS INTERFERENCE IN THE GROWTH OF SALMONELLA TYPHI IN A MILK MATRIX

Directory of Open Access Journals (Sweden)

Yuri de Jesus Lopes de Abreu

2013-08-01

Full Text Available Bacterial interference can occur through various mechanisms, including the production of peroxides, acids, ammonia, bacteriolytic enzymes or bacteriocins. The strain Escherichia coli EC2 produces the antimicrobial substance (AMS EC2, able to inhibit different strains of Gram-negative bacteria isolated from food, as E. coli and Salmonella sp. The activity of AMS EC2 was lost after treatment with proteolytic enzymes, indicating the presence of an active proteinaceous compound, suggesting that it is a bacteriocin. The substance, renamed bacteriocin EC2, has its better production when the producer strain is grown on Casoy medium, at 37ºC and pH 6.0, without NaCl addition, but it is also able to be produced in milk. When co-cultivated in UHT milk with the producer strain E. coli EC2, the growth of the indicator strain Salmonella Typhi is totally inhibited within the first 4 hours of incubation, suggesting a potential application of bacteriocin EC2 in the control of Salmonella sp. e.g. in foods.

Clinical comparison of technetium-99m-EC, technetium-99-m-MAG3 and Iodine-131-OIH in renal disorders

International Nuclear Information System (INIS)

Kabasakal, L.; Turoglu, T.; Oensel, C.

1995-01-01

Technetium-99m-ethylenedicysteine has recently been developed for renal function studies. The pharmacokinetics of 99m Tc-EC were studied by constant infusion technique and compared with 99m Tc-MAG3 and 131 I-OIH in 11 patients with various renal disorders. After giving a 7.4 MBq 131 I-OIH and 90-110 MBq 99m Tc-EC or 99m Tc-MAG3 bolus, a constant infusion (MBq/ml) 99m Tc--agent and 0.07 MBq/m 131 I-OIH was started. Sixteen blood and five urine samples were obtained over three hr. The renal clearance of 99m Tc-EC was higher than than of 99m Tc-MAG3. The 99m Tc-EC/OIH and 99m Tc-MAG3/OIH ratios were 0.75 ± 0.05 and 0.55 ± 0.10 (p=0.00087), respectively. The distribution volume of 99m Tc-EC was also higher than that of 99m Tc-MAG3 (15722 ± 4644 and 9509 ± 2788 ml/1.73m 2 , respectively; p=0.072). The 99m Tc-EC/OIH and 99m Tc-MAG/OIH distribution volume ratios were 1.03 ± 0.14 and 0.55 ± 0.10, respectively (p = 0.0003). The 60-min excretion values of 99m Tc-EC and 99m Tc-MAG3 were compared to that of OIH. The 99m Tc-EC/OIH and 99m Tc-MAG3/OIH excretion ratios were 0.96 ± 0.06 and 1.07 ± 0.10, respectively (p=0.162). The protein binding of 99m -EC and OIH were found to be 34% ±4 and 66% ±5, respectively (p 99m Tc-EC was negligible (3% ±1.2) in comparison to OIH (27% ±3; p 99m Tc-EC. This agent has good potential for renal function evaluation. 32 refs., 5 tabs

The EC thematic network on the analysis of thorium and its isotopes in workplace materials

International Nuclear Information System (INIS)

Howe, A.M.; Bernot, C.; Woods, M.J.

2001-01-01

Accurate measurements of workplace exposure to 232 Th and its progeny are required to estimate internal radiation doses received by persons working with thorium-containing materials. However, a small intercomparison carried out in the mid-nineteen nineties raised doubts about the reliability of results obtained by methods available for measurement of thorium. An EC-funded thematic network was therefore established to bring together experts in the field of thorium analysis in order to coordinate research activity and identify best analytical practice, requirements for reference materials, etc. This network has now successfully completed its work programme, which included a survey to determine future research needs; a series of intercomparisons to test the performance of methods for measuring thorium in workplace materials, and a workshop held to promote best practice and transfer information to regulatory authorities and industry. Results of the work have been used to make various recommendations concerning future needs in this field. (author)

The biodistribution and radiation dosimetry of 99Tcmm-EC-DG in normal volunteers

International Nuclear Information System (INIS)

Tang Jun; Yang Yi; Liu Zengli; Shi Yizhen

2010-01-01

The objective of this study is to evaluate the biodistribution of technetium-99m labeled ethylenedicysteine-deoxyglucose ( 99 Tc m -EC-DG) and to calculate its internal radiation absorbed dose in normal volunteers. 740 MBq 99 Tc m -EC-DG was injected into the antecubital vein. 2 ml blood were sampled from the contralateral antecubital vein at different time after the injection, and its radioactivity was measured. The bi-exponential curve of time-radioactivity of blood and the dynamic parameters were obtained by using ORIGIN 5.0. Urine was collected in 24 hours after the injection and the percentage of Radioactivity excreted by urine to the total injected radioactivity was calculated. The anterior and posterior whole body imaging were acquired at different time after the injection of 740 MBq 99 Tc m -EC-DG. The region of interest of these referring organs and tissues was drawn, their radioactivity at different time was calculated. The bi-exponential curve of time-radioactivity of every organ was obtained by using ORIGIN 5.0, and then cumulated radioactivity and retaining time of 99 Tcm-EC-DG were calculated and input into the software MIRDOSE 3.0 to obtain the radiation absorbed dose of every organ and tissue. The heart rate, blood pressure and breathing frequency is normal after the injection. The male volunteer's T1/2α is 39 seconds, T1/2β is 59 minutes and that of female volunteer is 21 seconds and 61 minutes. 99 Tc m -EC-DG imaging is safe, and its characteristic of biodistribution in normal volunteer makes it easy to accumulate in tumor. Brain is not imaged, the uptake of muscle is low. The absorbed dose of every organ is far lower than that of the public annual average limitation. (authors)

Expression of a finger millet transcription factor, EcNAC1, in tobacco confers abiotic stress-tolerance.

Directory of Open Access Journals (Sweden)

Venkategowda Ramegowda

Full Text Available NAC (NAM, ATAF1-2, and CUC2 proteins constitute one of the largest families of plant-specific transcription factors and have been shown to be involved in diverse plant processes including plant growth, development, and stress-tolerance. In this study, a stress-responsive NAC gene, EcNAC1, was isolated from the subtracted stress cDNA library generated from a drought adapted crop, finger millet, and characterized for its role in stress-tolerance. The expression analysis showed that EcNAC1 was highly induced during water-deficit and salt stress. EcNAC1 shares high amino acid similarity with rice genes that have been phylogenetically classified into stress-related NAC genes. Our results demonstrated that tobacco transgenic plants expressing EcNAC1 exhibit tolerance to various abiotic stresses like simulated osmotic stress, by polyethylene glycol (PEG and mannitol, and salinity stress. The transgenic plants also showed enhanced tolerance to methyl-viologen (MV induced oxidative stress. Reduced levels of reactive oxygen species (ROS and ROS-induced damage were noticed in pot grown transgenic lines under water-deficit and natural high light conditions. Root growth under stress and recovery growth after stress alleviation was more in transgenic plants. Many stress-responsive genes were found to be up-regulated in transgenic lines expressing EcNAC1. Our results suggest that EcNAC1 overexpression confers tolerance against abiotic stress in susceptible species, tobacco.

Modulation of biosynthesis and regulatory action of 24(S),25-epoxycholesterol (S-EC) in cultured cells by progesterone (PG)

International Nuclear Information System (INIS)

Panini, S.R.; Gupta, A.K.; Sexton, R.C.; Parish, E.J.; Rudney, H.

1987-01-01

Treatment of IEC-6 cells with PG caused a strong inhibition of cholesterol biosynthesis at the level of desmosterol reductase. In addition, two new products were observed in PG-treated cells. The first compound was designated as cholesta-5,7,24-trien-3β-ol based on its HPLC chromatographic properties. The second compound was identified as S-EC based on (1) a comparison of its chromatographic properties with those of authentic EC and (2) by its conversion to 25-hydroxycholesterol (HC) upon reduction with LiAlH 4 . In spite of cellular accumulation of S-EC in the presence of PG, the activity of HMG-CoA reductase (HMGR) which is known to be sensitive to oxysterols, was elevated rather than suppressed. On the other hand, when PG-treated cells were refed fresh medium without PG, HMGR activity was suppressed. Exogenous S-EC was a potent suppressor of HMGR in untreated IEC-6 cells. Suppression of HMGR by S-EC but not by HC could be prevented by progesterone. Exogenous [ 3 H]S-EC was not metabolized by IEC-6 cells. These results support the hypothesis that S-EC plays a normal regulatory role in sterol biosynthesis and indicate that enhanced S-EC synthesis observed in the presence of PG may be due to interference with this regulatory action

Inter-comparison of NIOSH and IMPROVE protocols for OC and EC determination: implications for inter-protocol data conversion

Science.gov (United States)

Wu, Cheng; Huang, X. H. Hilda; Ng, Wai Man; Griffith, Stephen M.; Zhen Yu, Jian

2016-09-01

Organic carbon (OC) and elemental carbon (EC) are operationally defined by analytical methods. As a result, OC and EC measurements are protocol dependent, leading to uncertainties in their quantification. In this study, more than 1300 Hong Kong samples were analyzed using both National Institute for Occupational Safety and Health (NIOSH) thermal optical transmittance (TOT) and Interagency Monitoring of Protected Visual Environment (IMPROVE) thermal optical reflectance (TOR) protocols to explore the cause of EC disagreement between the two protocols. EC discrepancy mainly (83 %) arises from a difference in peak inert mode temperature, which determines the allocation of OC4NSH, while the rest (17 %) is attributed to a difference in the optical method (transmittance vs. reflectance) applied for the charring correction. Evidence shows that the magnitude of the EC discrepancy is positively correlated with the intensity of the biomass burning signal, whereby biomass burning increases the fraction of OC4NSH and widens the disagreement in the inter-protocol EC determination. It is also found that the EC discrepancy is positively correlated with the abundance of metal oxide in the samples. Two approaches (M1 and M2) that translate NIOSH TOT OC and EC data into IMPROVE TOR OC and EC data are proposed. M1 uses direct relationship between ECNSH_TOT and ECIMP_TOR for reconstruction: M1 : ECIMP_TOR = a × ECNSH_TOT + b; while M2 deconstructs ECIMP_TOR into several terms based on analysis principles and applies regression only on the unknown terms: M2 : ECIMP_TOR = AECNSH + OC4NSH - (a × PCNSH_TOR + b), where AECNSH, apparent EC by the NIOSH protocol, is the carbon that evolves in the He-O2 analysis stage, OC4NSH is the carbon that evolves at the fourth temperature step of the pure helium analysis stage of NIOSH, and PCNSH_TOR is the pyrolyzed carbon as determined by the NIOSH protocol. The implementation of M1 to all urban site data (without considering seasonal specificity

EC tells Bonn let in UK coal

Energy Technology Data Exchange (ETDEWEB)

1992-06-23

The European Commission has told the German federal government to open the door for coal imports from other EC member countries. As an initial step, the Commission is suggesting that some of the power station coal which was to be sourced from German stockpiles under the November 1991 agreement between Rurhkohle AG, the state mining company and the generators, be supplied by other member states such as the UK. The implications of this move for the German coal industry are discussed. 2 tabs.

GPM GROUND VALIDATION ENVIRONMENT CANADA (EC) VAISALA CEILOMETER GCPEX V1

Data.gov (United States)

National Aeronautics and Space Administration — The GPM Ground Validation Environment Canada (EC) VAISALA Ceilometer GCPEx dataset was collected during the GPM Cold-season Precipitation Experiment (GCPEx) in...

The role of the IGF-1 Ec in myoskeletal system and osteosarcoma pathophysiology.

Science.gov (United States)

Armakolas, Nikolaos; Armakolas, Athanasios; Antonopoulos, Athanasios; Dimakakos, Andreas; Stathaki, Martha; Koutsilieris, Michael

2016-12-01

Growth hormone (GH) regulated mainly liver-produced insulin-like growth factor 1 (IGF-1) is a key molecule in embryonic & post embryonic development that is also involved in cancer biology. Herein we review new insights of the role of igf-1 gene products and of the IGF-1Ec isoform in muscle and bone development/repair and its role in osteosarcoma pathophysiology, underlying the possible role of the Ec peptide as a future therapeutic target. Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.

socio-ec(h)o: Ambient Intelligence and Gameplay

OpenAIRE

Wakkary, Ron

2005-01-01

The socio-ec(h)o project aims to research a generalized ambient intelligent software platform and design models for responsive environments based on the concept of ambient intelligent "ecologies" and group gameplay. The benefits of the research include a software-architecture, ambient intelligence inference engine, and interaction design models for gameplay and responsive environments. The paper will discuss the results of our prototypes for games in responsive environments. These prototypes ...

[Characteristics and sources apportionment of OC and EC in PM1.1 from Nanjing].

Science.gov (United States)

Jiang, Wen-juan; Guo, Zhao-bing; Liu, Feng-ling; Rui, Mao-ling; Shi, Lei; Zeng, Gang; Guo, Zi-yan

2015-03-01

The concentrations of OC and EC in PM1.1 collected from Nanshi (NS) and Nanhua (NH) in 2011 were analyzed using DRI Model 2001A Thermal Optical Carbon Analyzer. In addition, source apportionment was simultaneously evaluated. The results showed that the annual average concentrations of OC and EC in PM1.1 were 10. 10 μg x m(-3) and 2.52 μg x m(-3) in NS area, and 11.22 μg x m(-3) and 3.12 μg x m(-3) in NH area, respectively. This result indicated that OC and EC pollution in NH was more serious than that in NS area. Meanwhile, the concentrations of OC and EC in winter and spring were obviously higher compared to those in summer in these two sampling sites, which was mainly ascribed to the increased coal combustion and the unfavorable emission condition of air pollutants in summer and spring. We noted that the SOC/TOC value was the highest in summer and the lowest in winter. In addition, the SOC concentration was observed to show a positive correlation with ozone concentrations, which indicated that the photochemical reaction was a main way of SOC formation in autumn.

Involved-field radiotherapy for esophageal squamous cell carcinoma: theory and practice.

Science.gov (United States)

Li, Minghuan; Zhang, Xiaoli; Zhao, Fen; Luo, Yijun; Kong, Li; Yu, Jinming

2016-02-05

Esophageal carcinoma (EC) is characterized by a high rate of lymph node metastasis and its spread pattern is not always predictable. Chemoradiotherapy has an important role in the treatment of EC in both the inoperable and the pre-operative settings. However, regarding the target volume for radiation, different clinical practices exist. Theoretically, in addition to the clinical target volume administered to the gross lesion, it might seem logical to deliver a certain dose to the uninvolved regional lymph node area at risk for microscopic disease. However, in practice, it is difficult because of the intolerance of normal tissue to radiotherapy (RT), particularly if all regions containing the cervical, mediastinal, and upper abdominal nodes are covered. To date, the use of elective nodal irradiation (ENI) is still controversial in the field of radiotherapy. Some investigators use involved-field radiotherapy (IFRT) in order to reduce treatment-related toxicities. It is thought that micrometastases can be controlled, to some extent, by chemotherapy and the abscopal effects of radiation. It is the presence of overtly involved lymph nodes rather than the micrometastatic nodes negatively affects survival in patients with EC. In another hand, lymph nodes stationed near primary tumors also receive considerable incidental irradiation doses that may contribute to the elimination of subclinical lesions. These data indicate that an irradiation volume covering only the gross tumor is appropriate. When using ENI or IFRT, very few patients experience solitary regional node failure and out-of-field lymph node failure is not common. Primary tumor recurrence and distant metastases, rather than regional lymph node failure, affect the overall survival in patients with EC. The available evidence indicates that the use of ENI seems to prevent or delay regional nodal relapse rather than improve survival. In a word, these data suggest that IFRT is feasible in EC patients.

Acute and repeated ECS treatment increases CRF, POMC and PENK gene expression in selected regions of the rat hypothalamus.

Science.gov (United States)

Garcia-Garcia, L; Llewellyn-Jones, V; Fernandez Fernandez, I; Fuentes, J A; Manzanares, J

1998-01-05

The purpose of this study was to investigate the effects of acute and repeated electroconvulsive shock (ECS) on corticotropin releasing factor (CRF), proopiomelanocortin (POMC) and proenkephalin (PENK) gene expression in selected regions of the brain and pituitary of the rat. Acute ECS increased CRF gene expression in the paraventricular nucleus (PVN) by 20%, an effect that was further enhanced to 38% when rats received repeated ECS treatment. Acute and repeated ECS increased POMC gene expression in the arcuate nucleus (ARC) by 49-59% but failed to alter these mRNA levels in the anterior lobe (AL) of the pituitary gland. PENK gene expression was increased by 35% in the nucleus accumbens (NA) and by 180% the ventromedial nucleus (VMN) after acute or repeated ECS treatment but no significant changes were found in the PVN or striatum (ST). Taken together, these results indicate a differential CRF and opioid gene expression regulation after acute or repeated ECS treatment that may be relevant to their therapeutic or side effects in depression.

Cancer cells cause vascular endothelial cell (vEC) retraction via 12(S)HETE secretion; the possible role of cancer cell derived microparticle.

Science.gov (United States)

Uchide, Keiji; Sakon, Masato; Ariyoshi, Hideo; Nakamori, Syouji; Tokunaga, Masaru; Monden, Morito

2007-02-01

Cancer cell mediated vascular endothelial cell (vEC) retraction plays a pivotal role in cancer metastasis. The aim of this study is to clarify the biochemical character of vEC retraction factor derived from human breast cancer cell line, MCF-7. In order to estimate vEC retracting activity, transwell chamber assay system was employed. We first tested the effects of trypsin digestion as well as lipid extraction of culture medium (CM). Trypsin digestion of CM resulted in approximately 40% loss of vEC retracting activity and lipid extraction of CM by Brigh and Dyer methods recovered approximately 60% of vEC retracting activity, suggesting that approximately 60% of vEC retracting activity in MCF-7 derived CM is due to lipid. Although Nordihydroguaiaretic acid (NDGA), the specific lipoxygenase inhibitor, suppressed vEC retracting activity in CM, Acetyl salicylic acid (ASA), a specific cyclooxygenase inhibitor, did not affect the activity, suggesting that lipid exerting vEC retracting activity in CM belongs to lipoxygenase mediated arachidonate metabolites. Thin layer chromatography clearly demonstrated that Rf value of lipid vEC retracting factor in CM is identical to 12HETE. Authentic 12(S)HETE, but not 12(R)HETE, showed vEC retracting activity. After the ultracentrifugation of CM, most lipid vEC retracting activity was recovered from the pellet fraction, and flow cytometric analysis using specific antibody against 12(S)HETE clearly showed the association of 12(S)HETE with small particle in CM. These findings suggested the principal involvement of 12(S)HETE in cancer cell derived microparticles in cancer cell mediated vEC retraction.

哈氏弧菌EcGY020401优化培养%Optimization Culture of Vibrio harveyi EcGY020401

Institute of Scientific and Technical Information of China (English)

陶家发; 赖迎迢; 潘厚军; 石存斌; 吴淑勤

2010-01-01

目的:为规模化制备弧菌疫苗提供相关数据.方法:利用摇瓶和小型发酵罐培养,通过平板计数测定培养菌液的活菌数.结果:哈氏弧菌(Vibrio harveyi)EcGY020401株最适盐度为20～25g/L,合适的pH为7.5～7.7,葡萄糖浓度最适浓度为2～5g/L,用TSB优化培养基:胰蛋白胨5g/L、蛋白胨15g/L、大豆蛋白胨3g/L、酵母膏1g/L、葡萄糖4g/L、磷酸氢二钾5g/L、氯化钠15g/L、pH 7.5,培养EcGY020401菌株,可达2.95×1010 cfu/mL;小型发酵罐培养,10h可达到生长最大值,菌液浓度为3.46×1010cfu/mL 结论:用优化TSB培养基,采用发酵罐培养弧菌,可降低成本,提搞培养效率.

Consumption of food in EC countries

International Nuclear Information System (INIS)

Ven-Breken, T.J. van de; Brenot, J.; Bonnefous, S.; Noordijk, H.; Leenhouts, H.P.

1990-08-01

Annual consumption of 10 classes of food and drink is reported for the total population of each EC-country. National food consumption data are generalized by distinguishing groups of countries with similar diet. Group 1: UK and Ireland (low consumption of fruit, high consumption of potatoes and fresh dairy products). Group 2: Italy and Greece (high consumption of cereals, vegetables and fruit, low consumption of fresh dairy products). Group 3: France, Belgium, Luxembourg, Netherlands, FRG and Spain (intermediate consumption of most foodstuffs). Portugal and Denmark could not be classified in any group. Changes in food consumption related to differences in age, sex, social class, regional habits and level of urbanisation are reported.In some cases, variation of annual food consumption over the different seasons on the relative contribution of food from local origin to the total diet, could be estimated. Differences of region, age and level of urbanisation appear to have the largest influence on consumed amounts. As for age, the values for the different age-groups range from 50 to 80 percent of the adult diet. Regional consumption may diverge from 70-130 percent of the average national consumption, with values of 200 percent for potatoes and fruit. Consumption in urban areas compared with the entire country diverges from 70-100 percent. In rural areas the values diverge from 100-140 percent. Self-support of vegetables and milk seems to be important for most countries. Of the other products, self-support of wheat and cheese is only of importance in the south of the EC. When combining the effects of the different factors, a range of consumed amounts for specific population groups of 50 to 200 percent of the average national consumption was determined. (author). 38 refs.; 13 figs.; 75 tabs

Study of the magnetic microstructure of high-coercivity sintered SmCo5 permanent magnets with the conventional Bitter pattern technique and the colloid-SEM method

International Nuclear Information System (INIS)

Szmaja, Witold

2007-01-01

The magnetic microstructure of high-coercivity sintered SmCo 5 permanent magnets was studied with the conventional Bitter pattern technique, and also for the first time with the colloid-scanning electron microscopy (colloid-SEM) method. Both techniques were supported by digital image acquisition, enhancement and analysis. Thanks to this, it was possible to obtain high-contrast and clear images of the magnetic microstructure and to analyze them in detail, and consequently also to achieve improvements over earlier results. In the thermally demagnetized state the grains were composed of magnetic domains. On the surface perpendicular to the alignment axis, the main domains forming a maze pattern and surface reverse spikes were observed. Investigations on the surface parallel to the alignment axis, especially by the colloid-SEM technique, provided a detailed insight into the orientation of grains. The alignment of grains was good, but certainly not perfect; there were also strongly misaligned grains, although generally very rare. In most cases the domain structures within grains were independent of their neighbors, but in some cases (not so rare) the domain walls were observed to continue through the grain boundaries, indicating significant magnetostatic interaction between neighboring grains. Studies of the behavior of the magnetic microstructure under the influence of an external magnetic field, performed for the first time on the surface parallel to the alignment axis (with the conventional Bitter pattern method), showed that the domain walls move easily within the grains and that the magnetization reversal mechanism is mainly related to the nucleation and growth of reverse domains, i.e. that sintered SmCo 5 magnets are nucleation-dominated systems. Groupwise magnetization reversal of adjacent magnetically coupled grains was observed, an unfavorable effect for high-coercivity magnets. Images obtained by the colloid-SEM technique and the conventional Bitter pattern

1{sup st} workshop proceedings of the collaborative project ''Crystalline rock retention processes'' (7th EC FP CP CROCK)

Energy Technology Data Exchange (ETDEWEB)

Rabung, Thomas; Molinero, Jorge; Garcia, David; Montoya, Vanessa (eds.)

2012-07-01

The EURATOM 7th EC Framework Program Collaborative Project Crystalline ROCK retention processes (CROCK) started in January 2011 and extends over 2 and a half years. The key driver for initiation the CP CROCK, identified by national Waste Management Organizations, is the undesired high uncertainty and the associated conservatism with respect to the radionuclide transport in the crystalline host-rock far-field around geological disposal of high-level radioactive wastes.

annot8r: GO, EC and KEGG annotation of EST datasets

Directory of Open Access Journals (Sweden)

Schmid Ralf

2008-04-01

Full Text Available Abstract Background The expressed sequence tag (EST methodology is an attractive option for the generation of sequence data for species for which no completely sequenced genome is available. The annotation and comparative analysis of such datasets poses a formidable challenge for research groups that do not have the bioinformatics infrastructure of major genome sequencing centres. Therefore, there is a need for user-friendly tools to facilitate the annotation of non-model species EST datasets with well-defined ontologies that enable meaningful cross-species comparisons. To address this, we have developed annot8r, a platform for the rapid annotation of EST datasets with GO-terms, EC-numbers and KEGG-pathways. Results annot8r automatically downloads all files relevant for the annotation process and generates a reference database that stores UniProt entries, their associated Gene Ontology (GO, Enzyme Commission (EC and Kyoto Encyclopaedia of Genes and Genomes (KEGG annotation and additional relevant data. For each of GO, EC and KEGG, annot8r extracts a specific sequence subset from the UniProt dataset based on the information stored in the reference database. These three subsets are then formatted for BLAST searches. The user provides the protein or nucleotide sequences to be annotated and annot8r runs BLAST searches against these three subsets. The BLAST results are parsed and the corresponding annotations retrieved from the reference database. The annotations are saved both as flat files and also in a relational postgreSQL results database to facilitate more advanced searches within the results. annot8r is integrated with the PartiGene suite of EST analysis tools. Conclusion annot8r is a tool that assigns GO, EC and KEGG annotations for data sets resulting from EST sequencing projects both rapidly and efficiently. The benefits of an underlying relational database, flexibility and the ease of use of the program make it ideally suited for non

Influence of time dependent longitudinal magnetic fields on the cooling process, exchange bias and magnetization reversal mechanism in FM core/AFM shell nanoparticles: a Monte Carlo study.

Science.gov (United States)

Yüksel, Yusuf; Akıncı, Ümit

2016-12-07

Using Monte Carlo simulations, we have investigated the dynamic phase transition properties of magnetic nanoparticles with ferromagnetic core coated by an antiferromagnetic shell structure. Effects of field amplitude and frequency on the thermal dependence of magnetizations, magnetization reversal mechanisms during hysteresis cycles, as well as on the exchange bias and coercive fields have been examined, and the feasibility of applying dynamic magnetic fields on the particle have been discussed for technological and biomedical purposes.

Copper toxicity to different field-collected cladoceran species: intra-and inter-species sensitivity

International Nuclear Information System (INIS)

Bossuyt, Bart T.A.; Janssen, Colin R.

2005-01-01

The acute copper sensitivity of 44 European freshwater cladocerans, from four families (Daphniidae, Bosminidae, Macrothricidae, Chydoridae) and 13 genera (Daphnia, Ctenodaphnia, Ceriodaphnia, Simocephalus, Scapholeberis, Bosmina, Acantholeberis, Alona, Acroperus, Chydorus, Eurycercus, Disparalona and Pleuroxus) were assayed. The 48-h EC 50 s of field-collected organisms tested in reconstituted standard laboratory water ranged from 5.3 to 70.6 μg Cu L -1 . Only among Ctenodaphnia were significant intra-species differences observed. Significant inter-species differences were noted among Alonina and Daphnia. Between all genera tested, a maximum of a 12-fold difference in copper sensitivity was noted. Most animals were more sensitive than a laboratory D. magna clone. A weak non-significant increasing trend was noted between mean cladoceran 48-h EC 50 and ambient copper concentration of the different aquatic systems, suggesting acclimation/adaptation in the field. A positive relationship was also observed between the 48-h EC 50 of the field-collected cladoceran species (without the Chydoridae family) and the size of the organisms. - Zooplankton living in natural waters are more sensitive to copper than laboratory animals

Enhancement of crystallinity and magnetization in Fe3O4 nanoferrites induced by a high synthesized magnetic field

Science.gov (United States)

Ma, Xinxiu; Zhang, Zhanxian; Chen, Shijie; Lei, Wei; Xu, Yan; Lin, Jia; Luo, Xiaojing; Liu, Yongsheng

2018-05-01

A one-step hydrothermal method in different dc magnetic fields was used to prepare the Fe3O4 nanoparticles. Under the magnetic field, the average particle size decreased from 72.9 to 41.6 nm, meanwhile, the particle crystallinity is greatly improved. The magnetic field enhances its saturation magnetization and coercivity. The high magnetic field induce another magnetic structure. At room temperature, these nanoparticles exhibit superparamagnetism whose critical size (D sp) is about 26 nm. The Verwey transition is observed in the vicinity of 120 K of Fe3O4 nanoparticles. The effective magnetic anisotropy decreases with the increase of the test temperature because of the H c decreased.

Studies with the EC-Earth seamless Earth system prediction model

NARCIS (Netherlands)

Hazeleger, W.; Bintanja, R.

2012-01-01

EC-Earth is a new Earth System Model (ESM) based on the operational seasonal forecast system of the European Centre for Medium-Range Weather Forecasts (ECMWF). Climate and weather forecasting applications share a common ancestry and are build on the same physical principles. The emerging concept of

Impurity analysis in EC-99mTC radiotracer using chromatographic techniques

International Nuclear Information System (INIS)

Almeida, E.V.; Fukumori, N.T.O.; Mengatti, J.; Silva, C.P.G.; Matsuda, M.M.N.

2008-01-01

The objective of this study was to develop two chromatographic methods of impurity analysis in radiotracer 99m Tc-EC: the Thin Layer Chromatography (TLC) and the High Performance Liquid Chromatography Reversed Phase (HPLC-RP)

Serum antibodies and DNA indicate a high prevalence of equine papillomavirus 2 (EcPV2) among horses in Switzerland.

Science.gov (United States)

Fischer, Nina M; Favrot, Claude; Birkmann, Katharina; Jackson, Michele; Schwarzwald, Colin C; Müller, Martin; Tobler, Kurt; Geisseler, Marco; Lange, Christian E

2014-06-01

The DNA of equine papillomavirus type 2 (EcPV2) is consistently found in equine papillomas and squamous cell carcinomas, indicating a causal association of EcPV2 in the pathogenesis of these tumours; however, little is known about the prevalence of this virus. The aim of this study was to determine the geno- and seroprevalence of EcPV2 in clinically healthy horses in Switzerland. Fifty horses presented to the equine department of the university clinic, displaying no skin or mucous membrane lesions or severe signs of other diseases, were sampled. Cytobrush samples from the penis or vulva and serum samples were collected. To determine the genoprevalence of EcPV2, DNA was extracted from cytobrush samples and tested for viral DNA with a PCR assay amplifying a 338 bp fragment of the E7/E1 region of the viral genome. Seroprevalence was tested using an enzyme-linked immunosorbent assay aimed to detect antibodies against the major capsid protein (L1) of EcPV2. In five of 50 horses (10%), EcPV2-specific DNA was amplified but no antibodies could be detected, whereas in 14 of 50 horses (28%), antibodies against EcPV2 but no DNA were demonstrated. Both antibodies and viral DNA were detected in four of 50 horses (8%). Neither antibodies nor viral DNA were found in 27 of 50 horses (54%). The seroprevalence suggests that EcPV2 is prevalent in the Swiss equine population, while the genoprevalence indicates that currently ongoing infections are less common. The discrepancy between geno- and seroprevalence probably indicates different stages of infection in the tested cohort. © 2014 ESVD and ACVD.

Improved soft magnetic properties in nanocrystalline FeCuNbSiB Nanophy{sup ®} cores by intense magnetic field annealing

Energy Technology Data Exchange (ETDEWEB)

Madugundo, Rajasekhar; Geoffroy, Olivier [Univ. Grenoble Alpes, Inst NEEL, F-38000 Grenoble (France); CNRS, Inst NEEL, F-38000 Grenoble (France); Grenoble Electrical Engineering Laboratory (G2Elab), Bâtiment GreEn-ER, 21 avenue des martyrs, 38031 Grenoble (France); Waeckerle, Thierry [Aperam Research Center, 58160 Imphy (France); Frincu, Bianca; Kodjikian, Stéphanie [Univ. Grenoble Alpes, Inst NEEL, F-38000 Grenoble (France); CNRS, Inst NEEL, F-38000 Grenoble (France); Rivoirard, Sophie, E-mail: sophie.rivoirard@neel.cnrs.fr [Univ. Grenoble Alpes, Inst NEEL, F-38000 Grenoble (France); CNRS, Inst NEEL, F-38000 Grenoble (France)

2017-01-15

The effect of high external magnetic field (up to 7 T) on soft magnetic properties in nanocrystalline Fe{sub 74.1}Si{sub 15.7}Nb{sub 3.1}B{sub 6.1}Cu{sub 1} Nanophy{sup ®} cores has been investigated. The as-quenched amorphous ribbons were nanocrystallized by annealing between 540 and 620 °C in transverse magnetic field. By varying annealing field from 0 to 7 T, induced anisotropy ranging from as low as 4 J/m{sup 3} to as high as 41 J/m{sup 3} is obtained. It is responsible for an increase in the cut-off frequency up to 300 kHz when the material is submitted to dynamic magnetic excitations. A minimum coercivity of 0.74 A/m is observed in the core annealed in 1 T associated to low losses. The relative permeability decreases on increasing the annealing field intensity with a minimum value of 13,654 at 7 T. Such permeability level opens the way to new applications of the Nanophy{sup ®} alloys. - Highlights: • Effect of magnetic field (0–7 T) in nanocrystalline Nanophy{sup ®} cores was investigated. • Amorphous ribbons were annealing between 540 and 620 °C in transverse magnetic field. • Induced anisotropy ranging from 4 to 41 J/m{sup 3} was obtained by annealing in field 0−7 T. • Permeability ranging between 135,122 and 13,654 was obtained. • A minimum coercivity of 0.74 A/m was observed.

GPM GROUND VALIDATION ENVIRONMENT CANADA (EC) MANUAL PRECIPITATION MEASUREMENTS GCPEX V1

Data.gov (United States)

National Aeronautics and Space Administration — The GPM Ground Validation Environment Canada (EC) Manual Precipitation Measurements GCPEx dataset was collected during the GPM Cold-season Precipitation Experiment...

ECONOMIC AND LEGAL ASPECTS OF THE PLANNED DAMAGES ACTIONS FOR THE BREACHES OF EC ANTITRUST LAW

Directory of Open Access Journals (Sweden)

Elena Isac

2010-09-01

Full Text Available This paper investigates the planned damages actions for breaches of EC antitrust law in order to assess their impact on consumer welfare. It first examines the current legal situation and concurs that the European Union needs to regulate damages actions for breaches of EC antitrust law so that a higher number of consumers could be compensated for their losses. This paper then discusses the main legal provisions proposed by the Commission in the Green and in the White paper on damages actions for breaches of EC antitrust law. The analysis of these proposed legal provisions is done using arguments specific to the economic analysis of law. It is demonstrated that most of these proposed legal provisions will enhance consumer welfare but that there are also proposed legal provisions which will damage consumer welfare. The paper concludes that the planned damages actions for breaches of the EC law will be an improvement compared to the current situation. However, the Commission should amend some of the proposed legal provisions in order to help consumers further.

Q and A. Why the EC's PINC has failed Europe's nuclear industry

Energy Technology Data Exchange (ETDEWEB)

Kraev, Kamen [NucNet, Brussels (Belgium)

2016-12-15

The European Economic and Social Committee (EESC) has called for a more comprehensive strategy to be incorporated in a revised version of the European Commission's (EC) Illustrative Programme for Nuclear Energy (PINC). EESC member Brian Curtis tells NucNet why the PINC has failed to address key issues for nuclear and why he believes the EC has become side-tracked by renewables. The EESC is a consultative body which represents the interests of civil society organisations and stakeholders at the EU. Its opinions are forwarded to the EC, the European Council, and the European Parliament and are considered in the EU's decision-making process. Brian Curtis was rapporteur on the committee's opinion paper.

Towards Coleoptera-specific high-throughput screening systems for compounds with ecdysone activity: development of EcR reporter assays using weevil (Anthonomus grandis)-derived cell lines and in silico analysis of ligand binding to A. grandis EcR ligand-binding pocket.

Science.gov (United States)

Soin, Thomas; Iga, Masatoshi; Swevers, Luc; Rougé, Pierre; Janssen, Colin R; Smagghe, Guy

2009-08-01

Molting in insects is regulated by ecdysteroids and juvenile hormones. Several synthetic non-steroidal ecdysone agonists are on the market as insecticides. These ecdysone agonists are dibenzoylhydrazine (DBH) analogue compounds that manifest their toxicity via interaction with the ecdysone receptor (EcR). Of the four commercial available ecdysone agonists, three (tebufenozide, methoxyfenozide and chromafenozide) are highly lepidopteran specific, one (halofenozide) is used to control coleopteran and lepidopteran insects in turf and ornamentals. However, compared to the very high binding affinity of these DBH analogues to lepidopteran EcRs, halofenozide has a low binding affinity for coleopteran EcRs. For the discovery of ecdysone agonists that target non-lepidopteran insect groups, efficient screening systems that are based on the activation of the EcR are needed. We report here the development and evaluation of two coleopteran-specific reporter-based screening systems to discover and evaluate ecdysone agonists. The screening systems are based on the cell lines BRL-AG-3A and BRL-AG-3C that are derived from the weevil Anthonomus grandis, which can be efficiently transduced with an EcR reporter cassette for evaluation of induction of reporter activity by ecdysone agonists. We also cloned the almost full length coding sequence of EcR expressed in the cell line BRL-AG-3C and used it to make an initial in silico 3D-model of its ligand-binding pocket docked with ponasterone A and tebufenozide.

Integration of IC/EC systems in ITER

International Nuclear Information System (INIS)

Gassmann, T.; Beaumont, B.; Baruah, U.K.; Bonicelli, T.; Chiocchio, S.; Cox, D.; Darbos, C.; Decamps, H.; Denisov, G.; Henderson, M.; Kazarian, F.; Lamalle, P.U.; Mukherjee, A.; Rasmussen, D.; Saibene, G.; Sartori, R.; Sakamoto, K.; Tanga, A.

2010-01-01

The RF heating and current drive (H and CD) systems that are to be installed in ITER during the construction phase, are the electron cyclotron (EC) and ion cyclotron (IC) systems. They are complex assemblies of high voltage power supplies (HVPS), RF generators, transmission lines and antennas. Their design and integration are constrained by many interfaces, both internal, between the subsystems, and external, with the other ITER systems. In addition, some components must be compatible with a nuclear environment and are classified as Safety Important Component. This paper describes the processes implemented in ITER to ensure proper integration.

Renewables in Transport: Directive 2009/28/EC - Devils in its Details

International Nuclear Information System (INIS)

Wilkin, S.

2009-01-01

As part of the 3*20 targets reached in December 2008, the EC decided that the EU should, by 2020, source 20% of its Final Energy Consumption (FEC) renewably. Working towards this aim should in general contribute to the primary objective of reducing emissions, but there are two major issues with the implementation of the target in the Transport sector which run the risk of being irrelevant or even counterproductive. Firstly, the constraining stipulation that all Member States should source 10% of their Transport sector FEC renewably will be a struggle for some Member States to achieve, forcing them to invest large amounts of money which would be better spent elsewhere. Secondly, the relevant legislation gives unrepresentative weight to the benefits of Electric Vehicles (EVs), meaning that Member States which invest in EVs may give the illusion of having reached their national renewable targets without actually having done so. This paper is based on EC Directive 2009/28/EC (henceforth referred to as 'the Directive') and the National Renewable Energy Action Plans of Denmark, France, Germany, Italy, Spain, and the UK which were submitted in response. Each EU Member State has an individual target for the proportion of its FEC which is to come from renewable sources in 2020. The targets are based on the countries? existing renewable shares (as shown in Table 1 below) and their supposed capacity for improvement. Together, they give an average EU-wide target of 20% across the 27 Member States. (author)

Effect of integrated treatment on the use of coercive measures in first-episode schizophrenia-spectrum disorder. A randomized clinical trial

DEFF Research Database (Denmark)

Ohlenschlaeger, Johan; Nordentoft, Merete; Thorup, Anne

2008-01-01

The effect of integrated treatment on the use of coercive measures in first-episode schizophrenia-spectrum disorder in Denmark is not known. A total of 328 patients were randomly assigned to integrated treatment (167 patients) or standard treatment (161 patients). Integrated treatment consisted...... of assertive community treatment, psycho-educational multi-family groups, and social skills training. Data on coercion were extracted from the register from the National Board of Health, and data on continuity from medical records. Even though the level of continuity seemed higher in integrated treatment...

Coercivity enhancement in Ce-Fe-B based magnets by core-shell grain structuring

Directory of Open Access Journals (Sweden)

M. Ito

2016-05-01

Full Text Available Ce-based R2Fe14B (R= rare-earth nano-structured permanent magnets consisting of (Ce,Nd2Fe14B core-shell grains separated by a non-magnetic grain boundary phase, in which the relative amount of Nd to Ce is higher in the shell of the magnetic grain than in its core, were fabricated by Nd-Cu infiltration into (Ce,Nd2Fe14B hot-deformed magnets. The coercivity values of infiltrated core-shell structured magnets are superior to those of as-hot-deformed magnets with the same overall Nd content. This is attributed to the higher value of magnetocrystalline anisotropy of the shell phase in the core-shell structured infiltrated magnets compared to the homogeneous R2Fe14B grains of the as-hot-deformed magnets, and to magnetic isolation of R2Fe14B grains by the infiltrated grain boundary phase. First order reversal curve (FORC diagrams suggest that the higher anisotropy shell suppresses initial magnetization reversal at the edges and corners of the R2Fe14B grains.

[Knockdown of NEDD9 inhibits the proliferation, invasion and migration of esophageal carcinoma EC109 cells].

Science.gov (United States)

Zhang, Wen; Li, Shaojun; Zhao, Yunlong; Guo, Nannan; Li, Yingjie

2016-12-01

Objective To observe the expression of the neural precursor cell expressed, developmentally down-regulated 9 (NEDD9) in esophageal cancer, to investigate the impact of decreased expression of NEDD9 on invasion and migration, and to explicit the function of NEDD9 in EC109 human esophageal cancer cell line. Methods Immunohistochemical staining was used to detect the expression of NEDD9 in human esophageal cancer tissues and paracancerous normal tissues. RNA interfering (RNAi) was used to knockdown NEDD9 in EC109 cells. The interference efficiency was detected by reverse transcription PCR (RT-PCR) and Western blot analysis. Cell proliferation was determined by MTT assay and the invasion and migration abilities of EC109 cells were monitored by Transwell TM assay. The protein levels of proliferating cell nuclear antigen (PCNA), Bax and Bcl-2 were tested by Western blotting. Results The positive expression rate of NEDD9 in esophageal carcinoma tissues was significantly higher compared with that in the paracancerous tissues. After NEDD9 expression was successfully downregulated in EC109 cells by siRNA, the proliferation, invasion and migration rates in transfection group were significantly lower than those in control group; meanwhile, the expression of Bcl-2 was reduced and Bax expression was enhanced. Conclusion The protein expression level of NEDD9 is higher in esophageal carcinoma tissues than that in adjacent normal tissues. Knockdown of NEDD9 expression can restrain the proliferation, invasion and migration of EC109 cells.

(EC+β+) decay of 130Ce

International Nuclear Information System (INIS)

Xu Shuwei; Zhang Tianmei; Xie Yuanxiang; Ma Ruichang; Ge Yuanxiu; Guo Yingxiang; Wang Chunfang; Li Zhankui; Guo Bing; Xing Jianping; Guo Tianrui; Zhu Shaofei; Xu Wang; Du Jinzhou

1996-01-01

The nuclide 130 Ce was produced by a ( 16 O, 4n) reaction on an enriched 118 Sn target. Reaction products were transported to a shielded location by using a helium-jet tape transport system. A 22.9 min activity in chemically separated cerium sample was identified as 130 Ce. The (EC+β + ) decay scheme of 130 Ce was proposed for the first time. This scheme includes 108 γ-lines, 107 γ-lines among them being new. More than 13 1 + low-lying states of 130 La are populated in the decay of 130 Ce. Two new isomers with half-life of 77±10 ns and 17±5 ns were observed by means of delayed γ-γ coincidence measurements. (orig.). With 5 figs., 3 tabs

620 ASSESSMENT OF HEAVY METALS, pH AND EC IN EFFLUENT ...

African Journals Online (AJOL)

Osondu

evaluated metals were Cu, Fe, Ni, Mn, Cr, Zn, Cd, Co, and Ag. The pH, EC, TDS, DO ... heavy metals, but the high heavy metal concentrations in the soil could seriously ... Key words: Heavy metals, AAS, contamination, floriculture and effluents.

Mechanism of polarization switching in wurtzite-structured zinc oxide thin films

Science.gov (United States)

Konishi, Ayako; Ogawa, Takafumi; Fisher, Craig A. J.; Kuwabara, Akihide; Shimizu, Takao; Yasui, Shintaro; Itoh, Mitsuru; Moriwake, Hiroki

2016-09-01

The properties of a potentially new class of ferroelectric materials based on wurtzite-structured ZnO thin films are examined using the first-principles calculations. Theoretical P-E hysteresis loops were calculated using the fixed-D method for both unstrained and (biaxially) strained single crystals. Ferroelectric polarization switching in ZnO (S.G. P63mc) is shown to occur via an intermediate non-polar structure with centrosymmetric P63/mmc symmetry by displacement of cations relative to anions in the long-axis direction. The calculated coercive electric field (Ec) for polarization switching was estimated to be 7.2 MV/cm for defect-free monocrystalline ZnO. During switching, the short- and long-axis lattice parameters expand and contract, respectively. The large structural distortion required for switching may explain why ferroelectricity in this compound has not been reported experimentally for pure ZnO. Applying an epitaxial tensile strain parallel to the basal plane is shown to be effective in lowering Ec during polarization, with a 5% biaxial expansion resulting in a decrease of Ec to 3.5 MV/cm. Comparison with calculated values for conventional ferroelectric materials suggests that the ferroelectric polarization switching of wurtzite-structured ZnO may be achievable by preparing high-quality ZnO thin films with suitable strain levels and low defect concentrations.

Analysis of Well ER-EC-7 Testing, Western Pahute Mesa - Oasis Valley FY 2000 Testing Program

Energy Technology Data Exchange (ETDEWEB)

None

2002-09-30

This report documents the analysis of the data collected for Well ER-EC-7 during the Western Pahute Mesa - Oasis Valley (WPM-OV) well development and testing program that was conducted during fiscal year (FY) 2000. The data collection for that program was documented in Appendix A, Western Pahute Mesa - Oasis Valley, Well ER-EC-7 Data Report for Development and Hydraulic Testing.

Analysis of Well ER-EC-8 testing, Western Pahute Mesa-Oasis Valley FY 2000 testing program

Energy Technology Data Exchange (ETDEWEB)

None

2002-09-30

This report documents the analysis of the data collected for Well ER-EC-8 during the Western Pahute Mesa - Oasis Valley (WPM-OV) well development and testing program that was conducted during fiscal year (FY) 2000. The data collection for that program is documented in Appendix A, Western Pahute Mesa-Oasis Valley, Well ER-EC-8 Data Report for development and Hydraulic Testing.

Analysis of Well ER-EC-4 Testing, Western Pahute Mesa-Oasis Valley FY 2000 Testing Program

Energy Technology Data Exchange (ETDEWEB)

None

2002-09-30

This report documents the analysis of the data collected for Well ER-EC-4 during the Western Pahute Mesa-Oasis Valley (WPM-OV) well development and testing program that was conducted during fiscal year (FY) 2000. The data collection for that program is documented in Appendix A, Western Pahute Mesa - Oasis Valley, Well ER-EC-4 Data Report for Development and Hydraulic Testing.

Analysis of Well ER-EC-5 Testing, Western Pahute Mesa-Oasis Valley FY 2000 Testing Program

Energy Technology Data Exchange (ETDEWEB)

None

2002-09-30

This report documents the analysis of the data collected for Well ER-EC-5 during the Western Pahute Mesa - Oasis Valley (WPM-OV) well development and testing program that was conducted during fiscal year (FY) 2000. The data collection for that program is documented in Appendix A, Western Pahute Mesa - Oasis Valley, Well ER-EC-5 Data Report for Development and Hydraulic Testing.

Analysis of Well ER-EC-6 Testing, Western Pahute Mesa - Oasis Valley FY 2000 Testing Program

Energy Technology Data Exchange (ETDEWEB)

None

2002-09-30

This report documents the analysis of the data collected for Well ER-EC-6 during the Western Pahute Mesa-Oasis Valley (WPM-OV) well development and testing program that was conducted during fiscal year (FY) 2000. The data collection for that program is documented in Appendix A, Western Pahute Mesa-Oasis Valley, Well ER-EC-6 Data Report for Development and Hydraulic Testing.

Analysis of Well ER-EC-1 Testing, Western Pahute Mesa-Oasis Valley FY 2000 Testing Program

Energy Technology Data Exchange (ETDEWEB)

None

2002-09-30

This report documents the analysis of the data collected for Well ER-EC-1 during the Western Pahute Mesa - Oasis Valley (WPM-OV) well development and testing program that was conducted during fiscal year (FY) 2000. The data collection for that program is documented in Appendix A, Western Pahute Mesa - Oasis Valley, Well ER-EC-1 Data Report for Development and Hydraulic Testing.

Capability and limits of EC policy and instruments for protection of the environment

International Nuclear Information System (INIS)

Jarass, H.D.; Neumann, L.F.; Pastowski, A.; Ruhr, H.J. von der; Schreiber, F.

1994-01-01

The authors who contributed to this compilation of studies start from different points of view in their approaches towards describing the existing (or desirable) balance between centralised and decentralised frameworks and instruments of the EC policy for protection of the environment: A total harmonisation of environmental protection standards would be inconsistent with the principles of competition and, in terms of environmental protection, would rather foster a climate tending to be hostile to innovation. The impetus given by the EC in support of free mobility in the transport sector of the internal market on the other hand ought to be flanked by mandatory ecological standards. Adhering to the economic theory of federalism would mean to decide for a high degree of decentralisation, which in turn does not seem to be altogether appropriate in view of the large scope of impact of environmental damage and the mutual ecological dependence of EC member states. A more centralised regulatory competence has to be accompanied by correspondingly strong, democratic institutions in order to fulfill the principles of constitutional law. The priority given to the principle of subsidiarity in the compromise laid down in the Treaty of Maastricht needs to be given concrete shape [de

Magnetic properties of the magnetic hybrid membranes based on various polymer matrices and inorganic fillers

International Nuclear Information System (INIS)

Rybak, Aleksandra; Kaszuwara, Waldemar

2015-01-01

Magnetic hybrid membranes based on ethylcellulose (EC), poly(2,6-dimethyl-1,4-phenylene oxide) (PPO) and various magnetic praseodymium and neodymium powder microparticles as fillers were obtained. Permeability, diffusion and sorption coefficients of O 2 , N 2 and synthetic air components were estimated for homogeneous and heterogeneous membranes using the Time Lag method based on constant pressure permeation technique. The microstructure studies and the phase analysis of magnetic membranes were also performed using SEM and XRD. The influence of magnetic parameters, like coercivity, remanence and saturation magnetization of created membranes on the gas transport properties was studied. The results showed that their coercivity depended on composition and microstructure of the magnetic powder. On the other hand, remanence and saturation magnetization increased with the increase of the powder addition in the membrane. It was found that the magnetic membrane's gas transport properties were improved with the increase of membrane's remanence, saturation magnetization and magnetic particle filling. The decrease in powder particle size and associated increase of the membrane's coercivity also positively influenced the gas transport and separation properties of investigated membranes. It was observed that the magnetic ethylcellulose and poly(2,6-dimethyl-1,4-phenylene oxide) membranes had higher gas permeability, while their permselectivity and solubility coefficient values were rather maintained or slightly increased. The results also showed that the magnetic powder content enhanced significantly gas diffusivity in EC and PPO membranes. It was also analyzed the dependence of the drift coefficient w on the magnetic parameters of investigated membranes. The correlation between the membrane selectivity, permeability and magnetic properties with their XRD characteristics was stated. - Highlights: • Membrane's production consisting of EC or PPO polymers and

Magnetic properties of the magnetic hybrid membranes based on various polymer matrices and inorganic fillers

Energy Technology Data Exchange (ETDEWEB)

Rybak, Aleksandra, E-mail: Aleksandra.Rybak@polsl.pl [Department of Physical Chemistry and Technology of Polymers, Faculty of Chemistry, Silesian University of Technology, Strzody 9, 44-100 Gliwice (Poland); Kaszuwara, Waldemar [Faculty of Materials Science and Engineering, Warsaw University of Technology, Woloska 141, 02-507 Warszawa (Poland)

2015-11-05

Magnetic hybrid membranes based on ethylcellulose (EC), poly(2,6-dimethyl-1,4-phenylene oxide) (PPO) and various magnetic praseodymium and neodymium powder microparticles as fillers were obtained. Permeability, diffusion and sorption coefficients of O{sub 2}, N{sub 2} and synthetic air components were estimated for homogeneous and heterogeneous membranes using the Time Lag method based on constant pressure permeation technique. The microstructure studies and the phase analysis of magnetic membranes were also performed using SEM and XRD. The influence of magnetic parameters, like coercivity, remanence and saturation magnetization of created membranes on the gas transport properties was studied. The results showed that their coercivity depended on composition and microstructure of the magnetic powder. On the other hand, remanence and saturation magnetization increased with the increase of the powder addition in the membrane. It was found that the magnetic membrane's gas transport properties were improved with the increase of membrane's remanence, saturation magnetization and magnetic particle filling. The decrease in powder particle size and associated increase of the membrane's coercivity also positively influenced the gas transport and separation properties of investigated membranes. It was observed that the magnetic ethylcellulose and poly(2,6-dimethyl-1,4-phenylene oxide) membranes had higher gas permeability, while their permselectivity and solubility coefficient values were rather maintained or slightly increased. The results also showed that the magnetic powder content enhanced significantly gas diffusivity in EC and PPO membranes. It was also analyzed the dependence of the drift coefficient w on the magnetic parameters of investigated membranes. The correlation between the membrane selectivity, permeability and magnetic properties with their XRD characteristics was stated. - Highlights: • Membrane's production consisting of EC or PPO

Estrutura de comunidades em transições ambientais : lagartos no ecótono Cerrado-Amazônia

OpenAIRE

Dantas, Pedro Tourinho

2014-01-01

Os limites ecológicos desempenham um papel crucial no fluxo de espécies, de genes e 2 nutrientes entre áreas adjacentes. Os limites não apenas separam, mas também conectam 3 estas áreas, agindo como filtros de permeabilidade variável. A estrutura das comunidades 4 varia com a proximidade do ecótono e a riqueza de espécies no ecótono pode ser maior que, 5 menor que, ou intermediária entre as áreas adjacentes. Aqui, eu investigo como o ecótono 6 isola a Amazônia e o Cerrado, atuando como um fil...

Stability of the Gel Electrolyte PAN : EC : PC : LICF3SO3 towards Lithium

DEFF Research Database (Denmark)

Perera, Kumudu; Dissanayake, M.A.K.L.; Skaarup, Steen

2006-01-01

The stability of the gel electrolyte consisting of polyacrylonitrile (PAN), ethylene carbonate (EC), propylene carbonate (PC) and lithium trifluoromethanesulfonate (LiCF3SO3 – LiTF) towards metallic lithium was investigated using the time evolution of impedance plots. Symmetric cells of the form Li...... / PAN : EC : PC: LiTF / Li were assembled and impedance data were collected at room temperature for one week. A clear indication of growth of a resistive layer could be seen. The electrolyte resistance remained constant. The growth of the passivation layer became constant after first two days...

76 FR 30987 - Termination of Action and Further Monitoring in Connection With the EC-Beef Hormones Dispute

Science.gov (United States)

2011-05-27

... Connection With the EC-Beef Hormones Dispute AGENCY: Office of the United States Trade Representative. ACTION... Hormones dispute. In January 2009, the Trade Representative announced a determination to modify the list of...) in the EC-Beef Hormones dispute. The MOU provides for the EU to make phased increases in market...

Molecular characterization of EcCIPK24 gene of finger millet (Eleusine coracana) for investigating its regulatory role in calcium transport.

Science.gov (United States)

Chinchole, Mahadev; Pathak, Rajesh Kumar; Singh, Uma M; Kumar, Anil

2017-08-01

Finger millet grains contain exceptionally high levels of calcium which is much higher compared to other cereals and millets. Since calcium is an important macronutrient in human diet, it is necessary to explore the molecular basis of calcium accumulation in the seeds of finger millet. CIPK is a calcium sensor gene, having role in activating Ca 2+ exchanger protein by interaction with CBL proteins. To know the role of EcCIPK24 gene in seed Ca 2+ accumulation, sequence is retrieved from the transcriptome data of two finger millet genotypes GP1 (low Ca 2+ ) and GP45 (high Ca 2+ ), and the expression was determined through qRT-PCR. The higher expression was found in root, shoot, leaf and developing spike tissue of GP45 compared to GP1; structural analysis showed difference of nine SNPs and one extra beta sheet domain as well as differences in vacuolar localization was predicted; besides, the variation in amino acid composition among both the genotypes was also investigated. Molecular modeling and docking studies revealed that both EcCBL4 and EcCBL10 showed strong binding affinity with EcCIPK24 (GP1) compared to EcCIPK24 (GP45). It indicates a genotypic structural variation, which not only affects the affinity but also calcium transport efficiency after interaction of CIPK-CBL with calcium exchanger ( Ec CAX1b) to pull calcium in the vacuole. Based on the expression and in silico study, it can be suggested that by activating EcCAX1b protein, EcCIPK24 plays an important role in high seed Ca 2+ accumulation.

Enhancement of switching speed of BiFeO3 capacitors by magnetic fields

Directory of Open Access Journals (Sweden)

E. J. Guo

2014-09-01

Full Text Available The effect of a magnetic field on the ferroelectric switching kinetics of BiFeO3 (BFO capacitors with La0.8Ca0.2MnO3 (LCMO bottom electrode and Pt top contact has been investigated. We find a strong dependence of the remnant polarization and coercive field on the magnetic field. The switching time can be systematically tuned by magnetic field and reaches a tenfold reduction around the Curie temperature of LCMO at 4 T. We attribute this behavior to the splitting of the voltage drops across the BFO film and the LCMO bottom electrode, which can be strongly influenced by an external magnetic field due to the magnetoresistance. Further experiments on the BFO capacitors with SrRuO3 bottom electrodes show little magnetic field dependence of ferroelectric switching confirming our interpretation. Our results provide an efficient route to control the ferroelectric switching speed through the magnetic field, implying potential application in multifunctional devices.

Energy-constrained open-system magmatic processes IV: Geochemical, thermal and mass consequences of energy-constrained recharge, assimilation and fractional crystallization (EC-RAFC)

International Nuclear Information System (INIS)

Wendy A. Bohrson Department of Geological Sciences, Central Washington University, Ellensburg, Washington, 98926, USA; Frank J. Spera Institute for Crustal Studies and Department of Geological Sciences, University of California, Santa Barbara, California, 93106, USA

2003-01-01

RAFC events may record a more complete view of the physiochemical history of an open-system magma body. The capability of EC-RAFC to track melts and solids creates a genetic link that can be compared to natural analogues such as layered mafic intrusions and flood basalts, or mafic enclaves and their intermediate-composition volcanic or plutonic hosts. The ability to quantify chemical and volume characteristics of solids and melts also underscores the need for integrated field, petrologic and geochemical studies of igneous systems. While it appears that a number of volcanic events or systems may be characterized by continuous influx or eruption of magma (''steady state systems''), reports describing compositional homogeneity for products that represent eruptions of more than one event are relatively rare. In support of this, EC-RAFC results indicate that very specific combinations of recharge conditions, bulk distribution coefficients, and element concentrations are required to achieve geochemical homogeneity during cooling of a magma body undergoing RAFC. In summary, critical points are that EC-RAFC provides a method to quantitatively investigate complex magmatic systems in a thermodynamic context; it predicts complex, nonmonotonic geochemical trends for which there are natural analogues that have been difficult to model; and finally, EC-RAFC establishes the link between the chemical and physical attributes of a magmatic system. Application of EC-RAFC promises to improve our understanding of specific tectonomagmatic systems as well as enhance our grasp of the essential physiochemical principles that govern magma body evolution

Control of unidirectional transport of single-file water molecules through carbon nanotubes in an electric field.

Science.gov (United States)

Su, Jiaye; Guo, Hongxia

2011-01-25

The transport of water molecules through nanopores is not only crucial to biological activities but also useful for designing novel nanofluidic devices. Despite considerable effort and progress that has been made, a controllable and unidirectional water flow is still difficult to achieve and the underlying mechanism is far from being understood. In this paper, using molecular dynamics simulations, we systematically investigate the effects of an external electric field on the transport of single-file water molecules through a carbon nanotube (CNT). We find that the orientation of water molecules inside the CNT can be well-tuned by the electric field and is strongly coupled to the water flux. This orientation-induced water flux is energetically due to the asymmetrical water-water interaction along the CNT axis. The wavelike water density profiles are disturbed under strong field strengths. The frequency of flipping for the water dipoles will decrease as the field strength is increased, and the flipping events vanish completely for the relatively large field strengths. Most importantly, a critical field strength E(c) related to the water flux is found. The water flux is increased as E is increased for E ≤ E(c), while it is almost unchanged for E > E(c). Thus, the electric field offers a level of governing for unidirectional water flow, which may have some biological applications and provides a route for designing efficient nanopumps.

Copper toxicity to different field-collected cladoceran species: intra-and inter-species sensitivity

Energy Technology Data Exchange (ETDEWEB)

Bossuyt, Bart T.A. [Laboratory of Environmental Toxicology and Aquatic Ecology, Ghent University, J. Plateaustraat 22, B-9000 Ghent (Belgium)]. E-mail: bart.bossuyt@ugent.be; Janssen, Colin R. [Laboratory of Environmental Toxicology and Aquatic Ecology, Ghent University, J. Plateaustraat 22, B-9000 Ghent (Belgium)

2005-07-15

The acute copper sensitivity of 44 European freshwater cladocerans, from four families (Daphniidae, Bosminidae, Macrothricidae, Chydoridae) and 13 genera (Daphnia, Ctenodaphnia, Ceriodaphnia, Simocephalus, Scapholeberis, Bosmina, Acantholeberis, Alona, Acroperus, Chydorus, Eurycercus, Disparalona and Pleuroxus) were assayed. The 48-h EC{sub 50}s of field-collected organisms tested in reconstituted standard laboratory water ranged from 5.3 to 70.6 {mu}g Cu L{sup -1}. Only among Ctenodaphnia were significant intra-species differences observed. Significant inter-species differences were noted among Alonina and Daphnia. Between all genera tested, a maximum of a 12-fold difference in copper sensitivity was noted. Most animals were more sensitive than a laboratory D. magna clone. A weak non-significant increasing trend was noted between mean cladoceran 48-h EC{sub 50} and ambient copper concentration of the different aquatic systems, suggesting acclimation/adaptation in the field. A positive relationship was also observed between the 48-h EC{sub 50} of the field-collected cladoceran species (without the Chydoridae family) and the size of the organisms. - Zooplankton living in natural waters are more sensitive to copper than laboratory animals.

Effect of Graphene-EC on Ag NW-Based Transparent Film Heaters: Optimizing the Stability and Heat Dispersion of Films.

Science.gov (United States)

Cao, Minghui; Wang, Minqiang; Li, Le; Qiu, Hengwei; Yang, Zhi

2018-01-10

To optimize the performance of silver nanowire (Ag NW) film heaters and explore the effect of graphene on a film, we introduced poly(3,4-ethylenedioxythiophene):poly(4-styrenesulfonate) (PEDOT:PSS) and graphene modified with ethyl cellulose (graphene-EC) into the film. The high-quality and well-dispersed graphene-EC was synthesized from graphene obtained by electrochemical exfoliation as a precursor. The transparent film heaters were fabricated via spin-coating. With the assistance of graphene-EC, the stability of film heaters was greatly improved, and the conductivity was optimized by adjusting the Ag NW concentration. The film heaters exhibited a fast and accurate response to voltage, accompanied by excellent environmental endurance, and there was no significant performance degradation after being operated for a long period of time. These results indicate that graphene-EC plays a crucial role in optimizing film stability and heat dispersion in the film. The Ag NW/PEDOT:PSS-doped graphene-EC film heaters show a great potential in low-cost indium-tin-oxide-free flexible transparent electrodes, heating systems, and transparent film heaters.

Effect of condensed tannins in hulls of faba beans (Vivia faba L.) on the activities of trypsin (EC 2.4.21.4) and chymotrypsin (EC 2.4.21.1) in digesta collected from the small intestine of pigs

NARCIS (Netherlands)

Jansman, A.J.M.; Enting, H.; Verstegen, M.W.A.; Huisman, J.

1994-01-01

The effects of condensed tannins in hulls of faba beans (Vicia faba L.) on the activities of trypsin (EC 3.4.21.4) and chymotrypsin (EC 3.4.21.1) in digesta obtained from the small intestine of pigs were studied. Using four castrated male pigs (mean body weight 83 kg) fitted with both a simple

A look at the ocean in the EC-Earth climate model

Energy Technology Data Exchange (ETDEWEB)

Sterl, Andreas; Bintanja, Richard; Severijns, Camiel [Royal Netherlands Meteorological Institute (KNMI), P.O. Box 201, De Bilt (Netherlands); Brodeau, Laurent [Stockholm University, Department of Meteorology, Stockholm (Sweden); Gleeson, Emily; Semmler, Tido [Met Eireann, Dublin (Ireland); Koenigk, Torben; Wyser, Klaus [Swedish Meteorological and Hydrological Institute (SMHI), Norrkoeping (Sweden); Schmith, Torben; Yang, Shuting [Danish Meteorological Institute (DMI), Copenhagen (Denmark)

2012-12-15

EC-Earth is a newly developed global climate system model. Its core components are the Integrated Forecast System (IFS) of the European Centre for Medium Range Weather Forecasts (ECMWF) as the atmosphere component and the Nucleus for European Modelling of the Ocean (NEMO) developed by Institute Pierre Simon Laplace (IPSL) as the ocean component. Both components are used with a horizontal resolution of roughly one degree. In this paper we describe the performance of NEMO in the coupled system by comparing model output with ocean observations. We concentrate on the surface ocean and mass transports. It appears that in general the model has a cold and fresh bias, but a much too warm Southern Ocean. While sea ice concentration and extent have realistic values, the ice tends to be too thick along the Siberian coast. Transports through important straits have realistic values, but generally are at the lower end of the range of observational estimates. Exceptions are very narrow straits (Gibraltar, Bering) which are too wide due to the limited resolution. Consequently the modelled transports through them are too high. The strength of the Atlantic meridional overturning circulation is also at the lower end of observational estimates. The interannual variability of key variables and correlations between them are realistic in size and pattern. This is especially true for the variability of surface temperature in the tropical Pacific (El Nino). Overall the ocean component of EC-Earth performs well and helps making EC-Earth a reliable climate model. (orig.)

A miniature integrated multimodal sensor for measuring pH, EC and temperature for precision agriculture.

Science.gov (United States)

Futagawa, Masato; Iwasaki, Taichi; Murata, Hiroaki; Ishida, Makoto; Sawada, Kazuaki

2012-01-01

Making several simultaneous measurements with different kinds of sensors at the same location in a solution is difficult because of crosstalk between the sensors. In addition, because the conditions at different locations in plant beds differ, in situ measurements in agriculture need to be done in small localized areas. We have fabricated a multimodal sensor on a small Si chip in which a pH sensor was integrated with electrical conductivity (EC) and temperature sensors. An ISFET with a Si(3)N(4) membrane was used for the pH sensor. For the EC sensor, the electrical conductivity between platinum electrodes was measured, and the temperature sensor was a p-n junction diode. These are some of the most important measurements required for controlling the conditions in plant beds. The multimodal sensor can be inserted into a plant bed for in situ monitoring. To confirm the absence of crosstalk between the sensors, we made simultaneous measurements of pH, EC, and temperature of a pH buffer solution in a plant bed. When the solution was diluted with hot or cold water, the real time measurements showed changes to the EC and temperature, but no change in pH. We also demonstrated that our sensor was capable of simultaneous in situ measurements in rock wool without being affected by crosstalk.

RNA of Enterococcus faecalis Strain EC-12 Is a Major Component Inducing Interleukin-12 Production from Human Monocytic Cells.

Directory of Open Access Journals (Sweden)

Ryoichiro Nishibayashi

Full Text Available Interleukin-12 (IL-12 is an important cytokine for the immunomodulatory effects of lactic acid bacteria (LAB. Using murine immune cells, we previously reported that the RNA of Enterococcus faecalis EC-12, a LAB strain exerting probiotic-like beneficial effects, is the major IL-12-inducing immunogenic component. However, it was recently revealed that bacterial RNA can be a ligand for Toll-like receptor (TLR 13, which is only expressed in mice. Because TLR13 is not expressed in humans, the immuno-stimulatory and -modulatory effects of LAB RNA in human cells should be augmented excluding TLR13 contribution. In experiment 1 of this study, the role of LAB RNA in IL-12 induction in human immune cells was studied using three LAB strains, E.faecalis EC-12, Lactobacillus gasseri JCM5344, and Bifidobacterium breve JCM1192. RNase A treatment of heat-killed LAB significantly decreased the IL-12 production of human peripheral blood mononuclear cells on stimulation, while RNase III treatment revealed virtually no effects. Further, IL-12 production against heat-killed E. faecalis EC-12 was abolished by depleting monocytes. These results demonstrated that single stranded RNA (ssRNA of LAB is a strong inducer of IL-12 production from human monocytes. In experiment 2, major receptor for ssRNA of E. faecalis EC-12 was identified using THP-1 cells, a human monocytic cell line. The type of RNA molecules of E. faecalis EC-12 responsible for IL-12 induction was also identified. IL-12 production induced by the total RNA of E. faecalis EC-12 was significantly reduced by the treatment of siRNA for TLR8 but not for TLR7. Furthermore, both 23S and 16S rRNA, but not mRNA, of E. faecalis EC-12 markedly induced IL-12 production from THP-1 cells. These results suggested that the recognition of ssRNA of E. faecalis EC-12 was mediated by TLR8 and that rRNA was the RNA molecule that exhibited IL-12-inducing ability in human cells.

Core Analysis Combining MT (TIPPER) and Dielectric Sensors (Sans EC) in Earth and Space

Science.gov (United States)

Mound, Michael C.; Dudley, Kenneth L.

2015-01-01

On terrestrial planets and moons of our solar system cores reveal details about a geological structure's formation, content, and history. The strategy for the search for life is focused first on finding water which serves as a universal solvent, and identifying the rocks which such solvent act upon to release the constituent salts, minerals, ferrites, and organic compounds and chemicals necessary for life. Dielectric spectroscopy measures the dielectric properties of a medium as a function of frequency. Reflection measurements in the frequency range from 300 kHz to 300 MHz were carried out using RF and microwave network analyzers interrogating SansEC Sensors placed on clean geological core samples. These were conducted to prove the concept feasibility of a new geology instrument useful in the field and laboratory. The results show that unique complex frequency spectra can be acquired for a variety of rock core samples. Using a combination of dielectric spectroscopy and computer simulation techniques the magnitude and phase information of the frequency spectra can be converted to dielectric spectra. These low-frequency dielectric properties of natural rock are unique, easily determined, and useful in characterizing geology. TIPPER is an Electro-Magnetic Passive-Source Geophysical Method for Detecting and Mapping Geothermal Reservoirs and Mineral Resources. This geophysical method uses distant lightning and solar wind activity as its energy source. The most interesting deflections are caused by the funneling of electrons into more electrically conductive areas like mineralized faults, water or geothermal reservoirs. We propose TIPPER to be used with SansEC for determining terrain/ocean chemistry, ocean depth, geomorphology of fracture structures, and other subsurface topography characteristics below the ice crust of Jovian moons. NASA envisions lander concepts for exploration of these extraterrestrial icy surfaces and the oceans beneath. One such concept would use a

Using the ferroelectric/ferroelastic effect at cryogenic temperatures for set-and-hold actuation

Science.gov (United States)

Steeves, J. B.; Golinveaux, F. S.; Lynch, C. S.

2018-06-01

The ferroelectric and ferroelastic properties of lead-zirconate-titanate (PZT) based stack actuators have been characterized at temperatures down to 25 K and under various levels of constant compressive stress. Experiments indicate that the coercive field and magnitude of strain at the coercive field display an inverse relationship with temperature. A factor of 5.5 increase in coercive field, and a factor of 4.3 increase in strain is observed at 25 K in comparison to the room-temperature conditions. This information was used to induce non-180° domain wall motion in the material through the application of electric fields at or near the coercive field. The change in remanent strain accompanying these effects was shown to increase in magnitude as temperature decreased, reaching values of 2000 ppm at 25 K. This behavior was also shown to be temporally stable even under compressive loads. Additionally, it was demonstrated that the material can be returned to its original strain state through a repolarizing electric field. This switchable behavior could be exploited for future set-and-hold type actuators operating at cryogenic temperatures.

Threats to ultra-high-field MRI

Science.gov (United States)

Le Bihan, Denis

2009-08-01

In 2004 the European Commission (EC) adopted a directive restricting occupational exposure to electromagnetic fields. This directive (2004/40/CE), which examines the possible health risks of the electromagnetic fields from mobile phones, Wi-Fi, Bluetooth and other devices, concluded that upper limits on radiation and applied electromagnetic fields are necessary to prevent workers from suffering any undue acute health effects. But although not initially intended, the biggest impact of the directive could be on magnetic resonance imaging (MRI), which is used in hospitals worldwide to produce images of unrivalled quality of the brain and other soft tissues.

Activities of the Sofia EC Energy Center in the framework of the THERMIE programme. Dejnost na centyra po energetika na EO v Sofia v ramkite na programata TERMIE

Energy Technology Data Exchange (ETDEWEB)

Latinski, K

1993-01-01

The European Community Energy Center in Sofia is responsible for the EC implementation of the THERMIE programme. The programme's activities are promotion and dissemination of existing European technologies leading to better energy management and covering the fields of rational use of hydrocarbons, solid fuels and renewable energy sources. Application of these technologies would lead to substantial energy savings resulting in significant financial and environmental benefits. During its one-year operation the EC Energy Centre has organized and performed specific action as energy audits (food and beverage industrial units and buildings), demonstration projects (local heating control in buildings, diesel engine regulation of buses), training courses and seminars (in energy management and in space heating measuring and regulation), workshops (energy conservation in buildings, the bricks and clays sector and the food and beverage sector) and studies (wind energy potential, 'clean' coal technologies potential). Some of these actions have had very encouraging results showing potential energy savings of the order of 10-20% just by application of simple measures and with small additional investment. The activities of the EC Energy Centre in the coming year aimed at electricity savings along the entire line of electricity generation, transmission and consumption are outlined. (author).

Evolution of bias field and offset piezoelectric coefficient in bulk lead zirconate titanate with fatigue

International Nuclear Information System (INIS)

Zhang Yong; Baturin, Ivan S.; Aulbach, Emil; Lupascu, Doru C.; Kholkin, Andrei L.; Shur, Vladimir Ya.; Roedel, Juergen

2005-01-01

Hysteresis loops of the piezoelectric coefficient, d 33 =f(E 3 ), are measured on virgin and fatigued lead zirconate titanate ceramics. Four parameters are directly extracted from the measurements: internal bias field E b , offset piezoelectric coefficient d offset , coercive field E c , and remnant piezoelectric coefficient d r . The reduction in d r displays the decreasing switchable polarization with fatigue cycling. E b and d offset are found to be linearly related. After thermal annealing, both offsets disappear, while the increase in E c and the reduction in d r withstand annealing. The microscopic entities responsible for the offsets are less stable than those for reduced switching

Completion Report for Well ER-EC-8

International Nuclear Information System (INIS)

2004-01-01

Well ER-EC-8 was drilled for the U.S. Department of Energy, National Nuclear Security Administration Nevada Site Office in support of the Nevada Environmental Restoration Project at the Nevada Test Site, Nye County, Nevada. This well was drilled in the summer of 1999 as part of the U.S. Department of Energy's hydrogeologic investigation program in the Western Pahute Mesa - Oasis Valley region just west of the Nevada Test Site. A 44.5-centimeter surface hole was drilled and cased off to a depth of 129.8 meters below the surface. The hole diameter was then decreased to 31.1 centimeters for drilling to a total depth of 609.6 meters. One completion string with three isolated slotted intervals was installed in the well. A preliminary composite, static water level was measured at the depth of 98.4 meters, 24 days after installation of the completion string. Detailed lithologic descriptions with stratigraphic assignments are included in the report. These are based on evaluation of composite drill cuttings collected every 3 meters, and 20 sidewall samples taken at various depths below 157.9 meters, supplemented by geophysical log data and results of detailed chemical and mineralogical studies of rock samples. Drilling began in Tertiary-age tuff of the Thirsty Canyon Group, and penetrated tuffs of the Beatty Wash Formation, tuff of Buttonhook Wash, and the upper portion of the Ammonia Tanks Tuff. The geologic interpretation of data from this well helps define the location of the western margin of the Timber Mountain caldera complex in the southwestern Nevada volcanic field. Geologic and hydrologic data from the well will aid in development of models to predict groundwater flow and contaminant migration within and near the Nevada Test Site

Inactivation of the Ecs ABC Transporter of Staphylococcus aureus Attenuates Virulence by Altering Composition and Function of Bacterial Wall

NARCIS (Netherlands)

Jonsson, Ing-Marie; Juuti, Jarmo T.; Francois, Patrice; AlMajidi, Rana; Pietiainen, Milla; Girard, Myriam; Lindholm, Catharina; Saller, Manfred J.; Driessen, Arnold J. M.; Kuusela, Pentti; Bokarewa, Maria; Schrenzel, Jacques; Kontinen, Vesa P.

2010-01-01

Background: Ecs is an ATP-binding cassette (ABC) transporter present in aerobic and facultative anaerobic Gram-positive Firmicutes. Inactivation of Bacillus subtilis Ecs causes pleiotropic changes in the bacterial phenotype including inhibition of intramembrane proteolysis. The molecule(s)

Completion Report for Well ER-EC-1

International Nuclear Information System (INIS)

Townsend, M.J.

2000-01-01

Well ER-EC-1 was drilled for the U.S. Department of Energy, Nevada Operations Office in support of the Nevada Environmental Restoration Project at the Nevada Test Site, Nye County, Nevada. This well was drilled in the spring of 1999 as part of the U.S. Department of Energy's hydrogeologic investigation well program in the Western Pahute Mesa - Oasis Valley region just west of the Test Site. A 44.5-centimeter surface hole was drilled and cased off to the depth 675.1 meters below the surface. The hole diameter was then decreased to 31.1 centimeters for drilling to a total depth of 1,524.0 meters. A preliminary composite, static, water level was measured at the depth of approximately 566.3 meters prior to installation of the completion string. One completion string with three isolated, slotted intervals was installed in the well. Detailed lithologic descriptions with preliminary stratigraphic assignments are included in the report. These are based on composite drill cuttings collected every 3 meters and 31 sidewall samples taken at various depths below 680 meters, supplemented by geophysical log data. Detailed chemical and mineralogical studies of rock samples are in progress. The well penetrated Tertiary-age lava and tuff of the Timber Mountain Group, the Paintbrush Group, the Calico Hills Formation, the Crater Flat Group, and the Volcanics of Quartz Mountain. The preliminary geologic interpretation of data from Well ER-EC-1 indicates the presence of a structural trough or bench filled with a thick section of post-Rainier Mesa lava. These data also suggest that this site is located on a buried structural ridge that may separate the Silent Canyon and Timber Mountain caldera complexes

Ferro-based derivatizing agents for LC/MS an LC/EC/MS

NARCIS (Netherlands)

Seiwert, Bettina

2007-01-01

Within this thesis, the development and application of ferrocene-based derivatizing agents for LC/MS and LC/EC/MS is presented. The advantages of derivatization by ferrocenes are the similtaneous introduction of a mass tag and an electroactive group, which make them ideally suited for LC/MS and

Large coercivity and unconventional exchange coupling in manganese-oxide-coated manganese—gallium nanoparticles

International Nuclear Information System (INIS)

Feng Jun-Ning; Liu Wei; Geng Dian-Yu; Ma Song; Yu Tao; Zhao Xiao-Tian; Dai Zhi-Ming; Zhao Xin-Guo; Zhang Zhi-Dong

2014-01-01

The microstructures and magnetic properties of nanoparticles, each composed of an antiferromagnetic (AFM) manganese-oxide shell and a ferromagnetic-like core of manganese—gallium (MnGa) compounds, are studied. The core-shell structure is confirmed by transmission electron microscope (TEM). The ferromagnetic-like core contains three kinds of MnGa binary compounds, i.e., ferrimagnetic (FI) D0 22 -type Mn 3 Ga, ferromagnetic (FM) Mn 8 Ga 5 , and AFM D0 19 -type Mn 3 Ga, of which the first two correspond respectively to a hard magnetic phase and to a soft one. Decoupling effect between these two phases is found at low temperature, which weakens gradually with increasing temperature and disappears above 200 K. The exchange bias (EB) effect is observed simultaneously, which is caused by the exchange coupling between the AFM shell and FM-like core. A large coercivity of 6.96 kOe (1 Oe = 79.5775 A·m −1 ) and a maximum EB value of 0.45 kOe are achieved at 300 K and 200 K respectively. (special topic — international conference on nanoscience and technology, china 2013)

Interactive contribution of grain size and grain orientation to coercivity of melt spun ribbons

International Nuclear Information System (INIS)

Wang, N.; Li, G.; Yao, W.J.; Wen, X.X.

2010-01-01

During melt spinning process, the improvement of certain grain orientation and the refinement of grain size with surface velocity have interactive and contradictory effects on the magnetic properties. The contributions of these effects have seldom been taken into account and they were discussed in this paper via Fe-2, 4, 6.5 wt% Si alloys. Heat treatment at 1173 K for 1 h was performed to show the annealing impact. The X-ray diffraction patterns show that the high surface velocity and heat treatment increase the intensity ratio of line (2 0 0) to (1 1 0) of A2 phase. The (2 0 0) line corresponds to (2 0 0) plane in direction, easy magnetization direction of α-Fe phase in Fe-Si alloy. The improvement of this grain orientation with the surface velocity decreases the coercivity, which should increase due to the grain refinement. It is revealed that the texture promoted by the anisotropic heat release during melt spinning process is one factor to improve the magnetic properties and should be considered when preparing soft magnetic materials.

A Miniature Integrated Multimodal Sensor for Measuring pH, EC and Temperature for Precision Agriculture

Directory of Open Access Journals (Sweden)

Hiroaki Murata

2012-06-01

Full Text Available Making several simultaneous measurements with different kinds of sensors at the same location in a solution is difficult because of crosstalk between the sensors. In addition, because the conditions at different locations in plant beds differ, in situ measurements in agriculture need to be done in small localized areas. We have fabricated a multimodal sensor on a small Si chip in which a pH sensor was integrated with electrical conductivity (EC and temperature sensors. An ISFET with a Si₃N₄ membrane was used for the pH sensor. For the EC sensor, the electrical conductivity between platinum electrodes was measured, and the temperature sensor was a p-n junction diode. These are some of the most important measurements required for controlling the conditions in plant beds. The multimodal sensor can be inserted into a plant bed for in situ monitoring. To confirm the absence of crosstalk between the sensors, we made simultaneous measurements of pH, EC, and temperature of a pH buffer solution in a plant bed. When the solution was diluted with hot or cold water, the real time measurements showed changes to the EC and temperature, but no change in pH. We also demonstrated that our sensor was capable of simultaneous in situ measurements in rock wool without being affected by crosstalk.

Phase-field-crystal model for magnetocrystalline interactions in isotropic ferromagnetic solids

Science.gov (United States)

Faghihi, Niloufar; Provatas, Nikolas; Elder, K. R.; Grant, Martin; Karttunen, Mikko

2013-09-01

An isotropic magnetoelastic phase-field-crystal model to study the relation between morphological structure and magnetic properties of pure ferromagnetic solids is introduced. Analytic calculations in two dimensions were used to determine the phase diagram and obtain the relationship between elastic strains and magnetization. Time-dependent numerical simulations in two dimensions were used to demonstrate the effect of grain boundaries on the formation of magnetic domains. It was shown that the grain boundaries act as nucleating sites for domains of reverse magnetization. Finally, we derive a relation for coercivity versus grain misorientation in the isotropic limit.

GPM GROUND VALIDATION ENVIRONMENT CANADA (EC) MICRO RAIN RADAR (MRR) GCPEX V1

Data.gov (United States)

National Aeronautics and Space Administration — Environment Canada (EC) collected data from the Micro Rain Radar (MRR) during the GPM Cold-season Precipitation Experiment (GCPEx) in Ontario, Canada during the...

LiPF{sub 6}. Synthesis and stability in EC/DMC and PC/DMC mixtures; LiPF{sub 6}. Synthese et stabilite dans les melanges EC/DMC et PC/DMC

Energy Technology Data Exchange (ETDEWEB)

Naejus, R.; Coudert, R.; Lemordant, D. [Laboratoire P.I.M.I.R. EA, Sciences et Techniques, 37 - Tours (France); Willmann, P. [CNES, 31 - Toulouse (France)

1996-12-31

Lithium hexa-fluoro-phosphate LiPF{sub 6} is recommended for the replacement of the toxic LiAsF{sub 6} and the explosive perchlorates (like LiClO{sub 4}) in rechargeable lithium electrochemical generators. The aim of this work is to develop a new method of synthesis of this salt and to check its stability with respect to carbonated solvents: ethylene carbonate (EC), propylene carbonate (PC) and dimethyl-carbonate (DMC) in already optimized EC/DMC and PC/DMC binary mixtures. Two methods using HPF{sub 6} are proposed: the first one uses the direct neutralization of this commercial acid by LiOH in aqueous, alcoholic or acetonitrile environment, while in the second one LiPF{sub 6} is obtained from pyridinium hexa-fluoro-phosphate synthesized from HPF{sub 6} using a new and simple protocol. (J.S.) 24 refs.

LiPF{sub 6}. Synthesis and stability in EC/DMC and PC/DMC mixtures; LiPF{sub 6}. Synthese et stabilite dans les melanges EC/DMC et PC/DMC

Energy Technology Data Exchange (ETDEWEB)

Naejus, R; Coudert, R; Lemordant, D [Laboratoire P.I.M.I.R. EA, Sciences et Techniques, 37 - Tours (France); Willmann, P [CNES, 31 - Toulouse (France)

1997-12-31

Lithium hexa-fluoro-phosphate LiPF{sub 6} is recommended for the replacement of the toxic LiAsF{sub 6} and the explosive perchlorates (like LiClO{sub 4}) in rechargeable lithium electrochemical generators. The aim of this work is to develop a new method of synthesis of this salt and to check its stability with respect to carbonated solvents: ethylene carbonate (EC), propylene carbonate (PC) and dimethyl-carbonate (DMC) in already optimized EC/DMC and PC/DMC binary mixtures. Two methods using HPF{sub 6} are proposed: the first one uses the direct neutralization of this commercial acid by LiOH in aqueous, alcoholic or acetonitrile environment, while in the second one LiPF{sub 6} is obtained from pyridinium hexa-fluoro-phosphate synthesized from HPF{sub 6} using a new and simple protocol. (J.S.) 24 refs.

The relationship between hegemonic norms of masculinity and men's conceptualization of sexually coercive acts by women in South Africa.

Science.gov (United States)

Stern, Erin; Cooper, Diane; Greenbaum, Bryant

2015-03-01

While sexual abuse against women and girls in South Africa has generated much deserved attention, the awareness of men's experiences of sexual coercion is limited, and often restricted to a homosexual context. This article illuminates men's experiences of pressurized sex in a heterosexual context, which were revealed in a broader men's sexual health study. Fifty sexual history narrative interviews were conducted with men purposively sampled from three age categories: (18-24, 25-54, and 55+), a wide range of cultural and racial backgrounds, and in urban and rural sites across five provinces in South Africa. Narrative interviews began with accounts of early knowledge of sex and sexual experimentation and explored the range of sexual relationships and experiences through adulthood. The narratives privileged the diversity of men's conceptualizations of and the impact of reportedly sexually coercive experiences by women. Many men described feeling unready for their first sexual experiences but pressured to do so by their peers and female partners, who were often older. There were also some instances of sexual coercion by women against men, some of which would constitute a criminal offense in South Africa. Due to the pressure for men to always be responsive to women's sexual desires, these experiences were often not framed as sexual coercion. Nevertheless, for many of these men, such experiences were uncomfortable and unrewarding. Men's negative responses to such experiences appeared to be linked to the fact that they did not fit social stereotypes of masculine sexuality as being initiative and dominant. Such coercive experiences could influence men's sexual risk-taking, including their use of sexual coercion against women. Research on sexual abuse should not be limited to male against male sexual abuse, but needs to explore the meanings and experiences associated with reported coercion against men by women to more comprehensively prevent and respond to sexual violence

Analysis of Well ER-EC-2a Testing, Western Pahute Mesa-Oasis Valley FY 2000 Testing Program

Energy Technology Data Exchange (ETDEWEB)

None

2002-09-30

This report documents the analysis of the data collected for Well ER-EC-2a during the Western Pahute Mesa - Oasis Valley (WPM-OV) well development and testing program that was conducted during fiscal year (FY) 2000. The data collection for that program is documented in Appendix A, Western Pahute Mesa - Oasis Valley, Well ER-EC-2a Data Report for Development and Hydraulic Testing.

Electric field and temperature scaling of polarization reversal in silicon doped hafnium oxide ferroelectric thin films

International Nuclear Information System (INIS)

Zhou, Dayu; Guan, Yan; Vopson, Melvin M.; Xu, Jin; Liang, Hailong; Cao, Fei; Dong, Xianlin; Mueller, Johannes; Schenk, Tony; Schroeder, Uwe

2015-01-01

HfO 2 -based binary lead-free ferroelectrics show promising properties for non-volatile memory applications, providing that their polarization reversal behavior is fully understood. In this work, temperature-dependent polarization hysteresis measured over a wide applied field range has been investigated for Si-doped HfO 2 ferroelectric thin films. Our study indicates that in the low and medium electric field regimes (E < twofold coercive field, 2E c ), the reversal process is dominated by the thermal activation on domain wall motion and domain nucleation; while in the high-field regime (E > 2E c ), a non-equilibrium nucleation-limited-switching mechanism dominates the reversal process. The optimum field for ferroelectric random access memory (FeRAM) applications was determined to be around 2.0 MV/cm, which translates into a 2.0 V potential applied across the 10 nm thick films

MoisturEC: an R application for geostatistical estimation of moisture content from electrical conductivity data

Science.gov (United States)

Terry, N.; Day-Lewis, F. D.; Werkema, D. D.; Lane, J. W., Jr.

2017-12-01

Soil moisture is a critical parameter for agriculture, water supply, and management of landfills. Whereas direct data (as from TDR or soil moisture probes) provide localized point scale information, it is often more desirable to produce 2D and/or 3D estimates of soil moisture from noninvasive measurements. To this end, geophysical methods for indirectly assessing soil moisture have great potential, yet are limited in terms of quantitative interpretation due to uncertainty in petrophysical transformations and inherent limitations in resolution. Simple tools to produce soil moisture estimates from geophysical data are lacking. We present a new standalone program, MoisturEC, for estimating moisture content distributions from electrical conductivity data. The program uses an indicator kriging method within a geostatistical framework to incorporate hard data (as from moisture probes) and soft data (as from electrical resistivity imaging or electromagnetic induction) to produce estimates of moisture content and uncertainty. The program features data visualization and output options as well as a module for calibrating electrical conductivity with moisture content to improve estimates. The user-friendly program is written in R - a widely used, cross-platform, open source programming language that lends itself to further development and customization. We demonstrate use of the program with a numerical experiment as well as a controlled field irrigation experiment. Results produced from the combined geostatistical framework of MoisturEC show improved estimates of moisture content compared to those generated from individual datasets. This application provides a convenient and efficient means for integrating various data types and has broad utility to soil moisture monitoring in landfills, agriculture, and other problems.

Fossil and non-fossil sources of organic carbon (OC and elemental carbon (EC in Göteborg, Sweden

Directory of Open Access Journals (Sweden)

S. Szidat

2009-03-01

Full Text Available Particulate matter was collected at an urban site in Göteborg (Sweden in February/March 2005 and in June/July 2006. Additional samples were collected at a rural site for the winter period. Total carbon (TC concentrations were 2.1–3.6 μg m⁻³, 1.8–1.9 μg m⁻³, and 2.2–3.0 μg m⁻³ for urban/winter, rural/winter, and urban/summer conditions, respectively. Elemental carbon (EC, organic carbon (OC, water-insoluble OC (WINSOC, and water-soluble OC (WSOC were analyzed for ¹⁴C in order to distinguish fossil from non-fossil emissions. As wood burning is the single major source of non-fossil EC, its contribution can be quantified directly. For non-fossil OC, the wood-burning fraction was determined independently by levoglucosan and ¹⁴C analysis and combined using Latin-hypercube sampling (LHS. For the winter period, the relative contribution of EC from wood burning to the total EC was >3 times higher at the rural site compared to the urban site, whereas the absolute concentrations of EC from wood burning were elevated only moderately at the rural compared to the urban site. Thus, the urban site is substantially more influenced by fossil EC emissions. For summer, biogenic emissions dominated OC concentrations most likely due to secondary organic aerosol (SOA formation. During both seasons, a more pronounced fossil signal was observed for Göteborg than has previously been reported for Zurich, Switzerland. Analysis of air mass origin using back trajectories suggests that the fossil impact was larger when local sources dominated, whereas long-range transport caused an enhanced non-fossil signal. In comparison to other European locations, concentrations of levoglucosan and other monosaccharide anhydrides were low for the urban and the rural site in the area of Göteborg during winter.

High Field Linear Magnetoresistance Sensors with Perpendicular Anisotropy L10-FePt Reference Layer

Directory of Open Access Journals (Sweden)

X. Liu

2016-01-01

Full Text Available High field linear magnetoresistance is an important feature for magnetic sensors applied in magnetic levitating train and high field positioning measurements. Here, we investigate linear magnetoresistance in Pt/FePt/ZnO/Fe/Pt multilayer magnetic sensor, where FePt and Fe ferromagnetic layers exhibit out-of-plane and in-plane magnetic anisotropy, respectively. Perpendicular anisotropy L10-FePt reference layer with large coercivity and high squareness ratio was obtained by in situ substrate heating. Linear magnetoresistance is observed in this sensor in a large range between +5 kOe and −5 kOe with the current parallel to the film plane. This L10-FePt based sensor is significant for the expansion of linear range and the simplification of preparation for future high field magnetic sensors.

THEODORE, a two-step heating system for the EC/OC determination of radiocarbon (14C) in the environment

International Nuclear Information System (INIS)

Szidat, S.; Jenk, T.M.; Gaeggeler, H.W.; Synal, H.-A.; Hajdas, I.; Bonani, G.; Saurer, M.

2004-01-01

Measurements of 14 C in the organic carbon (OC) and elemental carbon (EC) fractions, respectively, of fine aerosol particles bear the potential to apportion anthropogenic and biogenic emission sources. For this purpose, the system THEODORE (two-step heating system for the EC/OC determination of radiocarbon in the environment) was developed. In this device, OC and EC are transformed into carbon dioxide in a stream of oxygen at 340 and 650 deg. C, respectively, and reduced to filamentous carbon. This is the target material for subsequent accelerator mass spectrometry (AMS) 14 C measurements, which were performed on sub-milligram carbon samples at the PSI/ETH compact 500 kV AMS system. Quality assurance measurements of SRM 1649a, Urban Dust, yielded a fraction of modern f M in total carbon (TC) of 0.522 ± 0.018 (n=5, 95% confidence level) in agreement with reported values. The results for OC and EC are 0.70 ± 0.05 (n=3) and 0.066 ± 0.020 (n=4), respectively

Rice Yield and the Fate of Fertilizer Nitrogen as Affected by Addition of Earthworm Casts Collected from Oilseed Rape Fields: A Pot Experiment.

Science.gov (United States)

Huang, Min; Zhou, Xuefeng; Xie, Xiaobing; Zhao, Chunrong; Chen, Jiana; Cao, Fangbo; Zou, Yingbin

2016-01-01

The mechanism associated with improvement of soil nutritional status by oilseed rape crop, leading to better performance of rice crop, in rice-oilseed rape cropping systems is little known. The present study was aimed to test the hypothesis that earthworm casts produced during oilseed rape-growing season have positive effects on grain yield and fertilizer nitrogen (N) utilization in the subsequent flooded rice crop. A 15N-tracing pot experiment was conducted to determine the effects of earthworm casts collected from oilseed rape fields on yield attributes in rice and the fate of fertilizer N. Soil treated with earthworm casts (soil: earthworm casts = 4: 1, w/w) (EC1) produced 39% higher grain yield than soil only (EC0). EC1 had 18% more panicle number and 10% higher spikelet filling percentage than EC0. Aboveground biomass and harvest index were higher in EC1 than in EC0 by 20% and 15%, respectively. SPAD values in flag leaves were 10% and 22% higher under EC1 than EC0 at 15 and 20 days after heading, respectively. EC1 had 19% higher total N uptake and 18% higher physiological N-use efficiency than EC0. These positive effects of earthworm casts on yield attributes offset negative effects of decreasing N rate from 0.74 g pot-1 (equivalent to the recommended field rate of 150 kg ha-1) to 0.44 g pot-1 (equivalent to 60% of the recommended rate). Fertilizer N retention rate was 7% higher while fertilizer N loss rate was 6% lower in EC1 than in EC0. Our study suggests that earthworm casts produced during oilseed rape-growing season are expected to have the following benefits on the subsequent flooded rice system: (1) improving growth and physiological processes in rice plants and consequently increasing rice grain yield, and (2) increasing fertilizer N retention rate and hence decreasing fertilizer N loss rate and reducing environmental risk.

Rice Yield and the Fate of Fertilizer Nitrogen as Affected by Addition of Earthworm Casts Collected from Oilseed Rape Fields: A Pot Experiment.

Directory of Open Access Journals (Sweden)

Min Huang

Full Text Available The mechanism associated with improvement of soil nutritional status by oilseed rape crop, leading to better performance of rice crop, in rice-oilseed rape cropping systems is little known. The present study was aimed to test the hypothesis that earthworm casts produced during oilseed rape-growing season have positive effects on grain yield and fertilizer nitrogen (N utilization in the subsequent flooded rice crop. A 15N-tracing pot experiment was conducted to determine the effects of earthworm casts collected from oilseed rape fields on yield attributes in rice and the fate of fertilizer N. Soil treated with earthworm casts (soil: earthworm casts = 4: 1, w/w (EC1 produced 39% higher grain yield than soil only (EC0. EC1 had 18% more panicle number and 10% higher spikelet filling percentage than EC0. Aboveground biomass and harvest index were higher in EC1 than in EC0 by 20% and 15%, respectively. SPAD values in flag leaves were 10% and 22% higher under EC1 than EC0 at 15 and 20 days after heading, respectively. EC1 had 19% higher total N uptake and 18% higher physiological N-use efficiency than EC0. These positive effects of earthworm casts on yield attributes offset negative effects of decreasing N rate from 0.74 g pot-1 (equivalent to the recommended field rate of 150 kg ha-1 to 0.44 g pot-1 (equivalent to 60% of the recommended rate. Fertilizer N retention rate was 7% higher while fertilizer N loss rate was 6% lower in EC1 than in EC0. Our study suggests that earthworm casts produced during oilseed rape-growing season are expected to have the following benefits on the subsequent flooded rice system: (1 improving growth and physiological processes in rice plants and consequently increasing rice grain yield, and (2 increasing fertilizer N retention rate and hence decreasing fertilizer N loss rate and reducing environmental risk.

Combgap Promotes Ovarian Niche Development and Chromatin Association of EcR-Binding Regions in BR-C.

Science.gov (United States)

Hitrik, Anna; Popliker, Malka; Gancz, Dana; Mukamel, Zohar; Lifshitz, Aviezer; Schwartzman, Omer; Tanay, Amos; Gilboa, Lilach

2016-11-01

The development of niches for tissue-specific stem cells is an important aspect of stem cell biology. Determination of niche size and niche numbers during organogenesis involves precise control of gene expression. How this is achieved in the context of a complex chromatin landscape is largely unknown. Here we show that the nuclear protein Combgap (Cg) supports correct ovarian niche formation in Drosophila by controlling ecdysone-Receptor (EcR)- mediated transcription and long-range chromatin contacts in the broad locus (BR-C). Both cg and BR-C promote ovarian growth and the development of niches for germ line stem cells. BR-C levels were lower when Combgap was either reduced or over-expressed, indicating an intricate regulation of the BR-C locus by Combgap. Polytene chromosome stains showed that Cg co-localizes with EcR, the major regulator of BR-C, at the BR-C locus and that EcR binding to chromatin was sensitive to changes in Cg levels. Proximity ligation assay indicated that the two proteins could reside in the same complex. Finally, chromatin conformation analysis revealed that EcR-bound regions within BR-C, which span ~30 KBs, contacted each other. Significantly, these contacts were stabilized in an ecdysone- and Combgap-dependent manner. Together, these results highlight Combgap as a novel regulator of chromatin structure that promotes transcription of ecdysone target genes and ovarian niche formation.

Energy policy and the scope of action of the EC; Die energiepolitischen Handlungsmoeglichkeiten der EG

Energy Technology Data Exchange (ETDEWEB)

Brand, E. [Universitaet Lueneburg, Lueneburg (Germany); Witthohn, A. [IHK Hannover (Germany)

2002-04-01

This contribution examines the legal basis of authorization and the scope of action of the European legislator with respect to legislation on the energy policy of the EC. The analysis starts with summarising the evolution of the primary law, looking inter alia at the constitutent treaties of the ECSC, EURATOM, and the EEC, and discusses further developments and treaties, as there is no specific, uniform basis of legislative power of the EC in the energy sector of EC. Subsequently, the basis for and secondary law making is discussed, the concluding part of the article giving an outlook on the future. (orig./CB) [German] Zentrale Frage des folgenden Beitrags ist, woraus der europaeische Gesetzgeber seine Kompetenz im Energiebereich ableitet und wie weit seine Regelungen in dem Bereich gehen duerfen. Um diese Fragen zu beantworten, wird zunaechst die Entwicklung des europaeischen Primaerrechts bzw. der Gruendungsvertraege im Energiebereich beleuchtet und werden die einschlaegigen Ermaechtigungsgrundlagen dargestellt. Im Anschluss daran stehen dann die wichtigsten sekundaerrechtlichen Regelungen im Mittelpunkt. Abschliessend wird ein Ausblick auf die weitere Entwicklung gegeben. (orig./CB)

Highly polarized single-c-domain single-crystal Pb(Mn,Nb)O(3)-PZT thin films.

Science.gov (United States)

Wasa, Kiyotaka; Adachi, Hideaki; Nishida, Ken; Yamamoto, Takashi; Matsushima, Tomoaki; Kanno, Isaku; Kotera, Hidetoshi

2012-01-01

In-plane unstrained single-c-domain/single-crystal thin films of PZT-based ternary ferroelectric perovskite, ξPb(Mn,Nb)O3-(1 - ξ)PZT, were grown on SrRuO(3)/Pt/MgO substrates using magnetron sputtering followed by quenching. The sputtered unstrained thin films exhibit unique ferroelectric properties: high coercive field, Ec > 180 kV/cm, large remanent polarization, P(r) = 100 μC/cm(2), small relative dielectric constants, ε* = 100 to 150, high Curie temperature, Tc = ~600 °C, and bulk-like large transverse piezoelectric constants, e31,f = -12.0 C/m(2) for PZT(48/52) at ξ = 0.06. The unstrained thin films are an ideal structure to extract the bulk ferroelectric properties. Their micro-structures and ferroelectric properties are discussed in relation to the potential applications for piezoelectric MEMS. © 2012 IEEE

Preparation of Pb(Zr, Ti)O3 Thin Films on Glass Substrates

Science.gov (United States)

Hioki, Tsuyoshi; Akiyama, Masahiko; Ueda, Tomomasa; Onozuka, Yutaka; Hara, Yujiro; Suzuki, Kouji

2000-09-01

Lead-zirconate-titanate (PZT) thin films were prepared on non-alkaline glass substrates widely used in liquid crystal display (LCD) devices, by plasma-assisted magnetron RF sputtering with an immersed coil. After preparation of the PZT thin film, the glass was available for use in LCD device processing. No mutual diffusion of the elements was recognized between the glass substrate and the bottom electrode. The PZT layer had a dense film structure with rectangular and columnar grains, and only its perovskite phase was crystalline. PZT thin films on a glass substrate had leakage current densities of about 10-8 A/cm2, acceptable hysteresis loop shapes with the remanent polarization (Pr) of 45 μC/cm2 and the coercive field (Ec) of 90 kV/cm. Ferroelectric properties on a glass substrate almost conform with those on a Si-based substrate.

Effects of {sup 60}Co γ-ray irradiation on microstructure and ferroelectric properties of Bi{sub 3.25}La{sub 0.75}Ti{sub 3}O{sub 12} thin films

Energy Technology Data Exchange (ETDEWEB)

Wang, Zan [Shenyang University of Technology, Shenyang 110870 (China); Shenyang University of Chemical Technology, Shenyang 110142 (China); Jiang, Wei, E-mail: weijiang.sut.edu@gmail.com [Shenyang University of Technology, Shenyang 110870 (China); Li, San-xi [Shenyang University of Technology, Shenyang 110870 (China); Tong, Jun-sheng [Liaoning Provincial Academy of Agricultural Science Radiation Center, 110142 (China)

2016-01-01

Bi{sub 3.25}La{sub 0.75}Ti{sub 3}O{sub 12} (BLT) thin films were deposited on Pt/Ti/SiO{sub 2}/Si substrates through sol–gel method. Films underwent {sup 60}Co γ-ray irradiation with different doses; 0, 50, 100 and 150 kGy, respectively. Impacts of γ-ray on the microstructure, ferroelectric properties, leakage current density and fatigue characteristic were studied in detail. The results of SEM images show that grain patterns become irregular. Remnant polarization (2Pr) and coercive field (2Ec) decrease with irradiation dose increase. C–V curves reveal obvious asymmetry along y-axis. The irradiated thin films display lower leakage current density and fatigue endurance up to more than 10{sup 10} switching cycles. These results suggest that radiation can improve the film performance in some areas.

Risk assesment in the context of EC directives on genetically modified organisms

Energy Technology Data Exchange (ETDEWEB)

Meer, P.J. van der [Ministry for the Environment (Netherlands)

1992-07-01

The introduction of these new molecular technologies initiated an international discussion on the safety in biotechnology. In 1974 one of the pioneers of this new technology, Paul Berg, expressed his view on the potential risks of recombinant DNA applications in the famous 'Berg letter', leading to a self-imposed moratorium on certain experiments. Following the Berg letter and the Asilomar convention, much international attention has been given to the question of safety in biotechnology. This attention resulted in hundreds of documents, research programmes, guidelines and regulations. This resulted, among others, in two EC Directives on genetically modified organisms: the EC Directive 90/219/EEC on the contained use of genetically modified micro-organisms, and Directive 90/220/EEC on the release of genetically modified organisms. These directives lay down a system for harmonization of risk assessment and risk management with regard to the safety for human health and the environment.

Risk assesment in the context of EC directives on genetically modified organisms

International Nuclear Information System (INIS)

Meer, P.J. van der

1992-01-01

The introduction of these new molecular technologies initiated an international discussion on the safety in biotechnology. In 1974 one of the pioneers of this new technology, Paul Berg, expressed his view on the potential risks of recombinant DNA applications in the famous 'Berg letter', leading to a self-imposed moratorium on certain experiments. Following the Berg letter and the Asilomar convention, much international attention has been given to the question of safety in biotechnology. This attention resulted in hundreds of documents, research programmes, guidelines and regulations. This resulted, among others, in two EC Directives on genetically modified organisms: the EC Directive 90/219/EEC on the contained use of genetically modified micro-organisms, and Directive 90/220/EEC on the release of genetically modified organisms. These directives lay down a system for harmonization of risk assessment and risk management with regard to the safety for human health and the environment

Agricultural price and income policy in the EC : alternative policies and their implications

NARCIS (Netherlands)

Meester, G.

1980-01-01

Alternative forms of income policy without direct supply control. Alternative forms of income policy with direct supply control: quota arrangements. The influence of EC policy on the world market prices of agricultural produce

MicroRNA-281 regulates the expression of ecdysone receptor (EcR) isoform B in the silkworm, Bombyx mori

Science.gov (United States)

Hundreds of Bombyx mori miRNAs had been identified in recent years, but their function in vivo remains poorly understood. The silkworm EcR gene (BmEcR) has three transcriptional isoforms, A, B1 and B2. Isoform sequences are different in the 3’UTR region of the gene, which is the case only in insects...

SIPSMetGen: It's Not Just For Aircraft Data and ECS Anymore.

Science.gov (United States)

Schwab, M.

2015-12-01

The SIPSMetGen utility, developed for the NASA EOSDIS project, under the EED contract, simplified the creation of file level metadata for the ECS System. The utility has been enhanced for ease of use, efficiency, speed and increased flexibility. The SIPSMetGen utility was originally created as a means of generating file level spatial metadata for Operation IceBridge. The first version created only ODL metadata, specific for ingest into ECS. The core strength of the utility was, and continues to be, its ability to take complex shapes and patterns of data collection point clouds from aircraft flights and simplify them to a relatively simple concave hull geo-polygon. It has been found to be a useful and easy to use tool for creating file level metadata for many other missions, both aircraft and satellite. While the original version was useful it had its limitations. In 2014 Raytheon was tasked to make enhancements to SIPSMetGen, this resulted a new version of SIPSMetGen which can create ISO Compliant XML metadata; provides optimization and streamlining of the algorithm for creating the spatial metadata; a quicker runtime with more consistent results; a utility that can be configured to run multi-threaded on systems with multiple processors. The utility comes with a java based graphical user interface to aid in configuration and running of the utility. The enhanced SIPSMetGen allows more diverse data sets to be archived with file level metadata. The advantage of archiving data with file level metadata is that it makes it easier for data users, and scientists to find relevant data. File level metadata unlocks the power of existing archives and metadata repositories such as ECS and CMR and search and discovery utilities like Reverb and Earth Data Search. Current missions now using SIPSMetGen include: Aquarius, Measures, ARISE, and Nimbus.

Heteronomy in the arts field: state funding and British arts organizations.

Science.gov (United States)

Alexander, Victoria D

2018-03-01

For Bourdieu, the field of cultural production is comprised of an autonomous and a heteronomous sector. A heteronomous sector is one that is interpenetrated by the commercial field. I discuss an arena that, until recently, was part of the relatively autonomous sector in the field of cultural production - the supported arts sector in the United Kingdom - and argue that it became more heteronomous, due to the penetration by the state. Heteronomy due to the commercial field is present but secondary to, and driven by, the actions of the state. Political parties' attempts to diffuse and legitimate a particular economic ideology have led to state demands that arts institutions adopt neoliberal business practices in exchange for funding. Government giving to the arts, previously at arm's length, proved to be a Faustian bargain that demanded significant repayment in the form of lost autonomy. Coercive pressures from the state, enacted over time, show how the domination of one field over another can occur, even when the domination is resisted. © London School of Economics and Political Science 2017.

Analysis of the pelE promoter in Erwinia chrysanthemi EC16.

Science.gov (United States)

Gold, S; Nishio, S; Tsuyumu, S; Keen, N T

1992-01-01

The pelE gene of Erwinia chrysanthemi strain EC16 encodes an extracellular pectate lyase protein that is important in virulence on plants. Control of pelE expression is complex, because the gene is regulated by catabolite repression, substrate induction, and growth-phase inhibition. A Tn7-lux reporter gene system was employed to define DNA sequences comprising the pelE promoter. When EC16 cells were grown on medium containing sodium polypectate, pelE transcriptional start sites were observed only at 95 and 96 bases upstream of the translational start site. However, DNA sequences required for pelE expression were also shown by deletion analysis to reside between 196 and 215 base pairs upstream of the translational start site. In addition to these upstream elements, two putative operator sequences that interact with negative regulatory factors occurred downstream of the transcriptional start. Finally, deletion of three bases from a putative catabolite gene activator protein binding site in the pelE promoter eliminated activity. The data demonstrate that the pelE promoter is complex and suggest that it interacts with several regulatory proteins.

The complete sequence and comparative analysis of a multidrug- resistance and virulence multireplicon IncFII plasmid pEC302/04 from an extraintestinal pathogenic Escherichia coli EC302/04 indicate extensive diversity of IncFII plasmids

Directory of Open Access Journals (Sweden)

Wing Sze eHo

2016-01-01

Full Text Available Extraintestinal pathogenic Escherichia coli (ExPEC that causes extraintestinal infections often harbor plasmids encoding fitness traits such as resistance and virulence determinants that are of clinical importance. We determined the complete nucleotide sequence of plasmid pEC302/04 from a multidrug-resistant E. coli EC302/04 which was isolated from the tracheal aspirate of a patient in Malaysia. In addition, we also performed comparative sequence analyses of 18 related IncFIIA plasmids to determine the phylogenetic relationship and diversity of these plasmids. The 140,232 bp pEC302/04 is a multireplicon plasmid that bears three replication systems (FII, FIA and FIB with subtype of F2:A1:B1. The plasmid is self-transmissible with a complete transfer region. pEC302/04 also carries antibiotic resistance genes such as blaTEM-1 and a class I integron containing sul1, cml and aadA resistance genes, conferring multidrug resistance (MDR to its host, E. coli EC302/04. Besides, two iron acquisition systems (SitABCD and IutA-IucABCD which are the conserved virulence determinants of ExPEC-colicin V or B and M (ColV/ColBM-producing plasmids were identified in pEC302/04. Multiple toxin-antitoxin (TA-based addiction systems (i.e., PemI/PemK, VagC/VagD, CcdA/CcdB, and Hok/Sok and a plasmid partitioning system, ParAB and PsiAB, which are important for plasmid maintenance were also found.Comparative plasmid analysis revealed only one conserved gene, the repA1 as the core genome, showing that there is an extensive diversity among the IncFIIA plasmids. The phylogenetic relationship of 18 IncF plasmids based on the core regions revealed that ColV/ColBM-plasmids and non-ColV/ColBM plasmids were separated into two distinct groups. These plasmids, which carry highly diverse genetic contents, are also mosaic in nature. The atypical combination of genetic materials, i.e., the MDR- and ColV/ColBM-plasmid-virulence encoding regions in a single ExPEC plasmid is rare but of

The Complete Sequence and Comparative Analysis of a Multidrug-Resistance and Virulence Multireplicon IncFII Plasmid pEC302/04 from an Extraintestinal Pathogenic Escherichia coli EC302/04 Indicate Extensive Diversity of IncFII Plasmids.

Science.gov (United States)

Ho, Wing Sze; Yap, Kien-Pong; Yeo, Chew Chieng; Rajasekaram, Ganeswrie; Thong, Kwai Lin

2015-01-01

Extraintestinal pathogenic Escherichia coli (ExPEC) that causes extraintestinal infections often harbor plasmids encoding fitness traits such as resistance and virulence determinants that are of clinical importance. We determined the complete nucleotide sequence of plasmid pEC302/04 from a multidrug-resistant E. coli EC302/04 which was isolated from the tracheal aspirate of a patient in Malaysia. In addition, we also performed comparative sequence analyses of 18 related IncFIIA plasmids to determine the phylogenetic relationship and diversity of these plasmids. The 140,232 bp pEC302/04 is a multireplicon plasmid that bears three replication systems (FII, FIA, and FIB) with subtype of F2:A1:B1. The plasmid is self-transmissible with a complete transfer region. pEC302/04 also carries antibiotic resistance genes such as bla TEM-1 and a class I integron containing sul1, cml and aadA resistance genes, conferring multidrug resistance (MDR) to its host, E. coli EC302/04. Besides, two iron acquisition systems (SitABCD and IutA-IucABCD) which are the conserved virulence determinants of ExPEC-colicin V or B and M (ColV/ColBM)-producing plasmids were identified in pEC302/04. Multiple toxin-antitoxin (TA)-based addiction systems (i.e., PemI/PemK, VagC/VagD, CcdA/CcdB, and Hok/Sok) and a plasmid partitioning system, ParAB, and PsiAB, which are important for plasmid maintenance were also found. Comparative plasmid analysis revealed only one conserved gene, the repA1 as the core genome, showing that there is an extensive diversity among the IncFIIA plasmids. The phylogenetic relationship of 18 IncF plasmids based on the core regions revealed that ColV/ColBM-plasmids and non-ColV/ColBM plasmids were separated into two distinct groups. These plasmids, which carry highly diverse genetic contents, are also mosaic in nature. The atypical combination of genetic materials, i.e., the MDR- and ColV/ColBM-plasmid-virulence encoding regions in a single ExPEC plasmid is rare but of clinical

Artificial intelligence in process control: Knowledge base for the shuttle ECS model

Science.gov (United States)

Stiffler, A. Kent

1989-01-01

The general operation of KATE, an artificial intelligence controller, is outlined. A shuttle environmental control system (ECS) demonstration system for KATE is explained. The knowledge base model for this system is derived. An experimental test procedure is given to verify parameters in the model.

EC + LH current drive efficiency in the presence of an internal transport barrier

International Nuclear Information System (INIS)

Rosa, P.R. da S; Ziebell, L.F.

2002-01-01

In this paper we study the effects of the presence of an internal transport barrier (ITB) on the current drive efficiency and power deposition profiles in the case of electron cyclotron waves interacting with an extended tail generated by lower hybrid (LH) waves. We study the subject by numerically solving the Fokker-Planck equation, with temperature and density profiles corrected along the time evolution at each collision time, based on the actual time-evolving electron distribution function. The results obtained show that the LH and electron cyclotron (EC) power absorption profiles and the current driven by the combined action of both types of waves are weakly dependent on the depth of the ITB, slightly more dependent on the level of magnetic turbulence and much more dependent on the level of EC wave power. (author)

Integration of the market of the European Community and the change of the industrial structure; EC shijo togo to sangyo kozo no henka

Energy Technology Data Exchange (ETDEWEB)

Nakamura, T; Uno, K; Tanimoto, T; Yamashita, T [Osaka Sangyo University, Osaka (Japan). Institute for Industrial Research

1994-11-22

This paper describes progress of the cooperation as to the integration of EC market and the change of industrial structure. For the structural change in the industry and economy accompanied by the integration of EC, effects of the Maastricht Treaty on the economic structure of EC are described. It is considered that the EC countries are affected by the political and economical restrictions due to the agreement of this treaty. For the change in the distribution structure accompanied by the integration of EC, obstruction factors of the deregulation of EC transportation market are especially investigated. Differences in the distribution capacity, various regulations and standards, and labor condition among individual countries are pointed out as the obstruction factors. For the unity of Germany and its economical and administrative influence, various problems are pointed out as to the economical confusion, progress in the de-nationalization of enterprises, management of real estate and land, etc. For the structural change in the road freight market in the member nations of EC, the structure of road freight market is made clear for the previous West Germany before the integration of European market. It is confirmed that the internationalization of the German domestic market is being promoted.

Analysis of electrical-field-dependent Dzyaloshinskii-Moriya interaction and magnetocrystalline anisotropy in a two-dimensional ferromagnetic monolayer

Science.gov (United States)

Liu, Jie; Shi, Mengchao; Lu, Jiwu; Anantram, M. P.

2018-02-01

We analyze the impacts of the electric field on the Dzyaloshinskii-Moriya interaction, magnetocrystalline anisotropy, and intrinsic ferromagnetism of the recently discovered two-dimensional ferromagnetic chromium tri-iodide (Cr I3 ) monolayer, by combining density functional theory and Monte Carlo simulations. By taking advantage of the counterbalancing effects of anisotropic symmetric exchange energy and antisymmetric exchange energy, it is shown that the intrinsic ferromagnetism can be manipulated by externally applied off-plane electric fields. The results quantitatively reveal the impacts of off-plane electric field on the lattice structure, magnetic anisotropy energy, symmetric and antisymmetric exchange energies, Curie temperature, magnetic hysteresis, and coercive field. The physical mechanism of all-electrical control of magnetism proposed here is useful for creating next-generation magnetic device technologies based on the recently discovered two-dimensional ferromagnetic crystals.

Search for EC-decayed neutron-deficient actinide isotopes using gas-jet coupled JAERI-ISOL

Energy Technology Data Exchange (ETDEWEB)

Tsukada, Kazuaki [Japan Atomic Energy Research Inst., Tokai, Ibaraki (Japan). Tokai Research Establishment

1997-07-01

To study the nuclear properties of unknown neutron deficient actinide isotopes which decay mainly via orbital electron capture (EC), we have developed a composite system consisting of a gas-jet transport apparatus and a thermal ion-source at the JAERI-ISOL. With this system, search for {sup 236}Am produced in the {sup 235}U({sup 6}Li, 5n) reaction has been performed. Pu KX-rays associated with the EC decay of {sup 236}Am are observed at the mass-236 fraction. The half-life of {sup 236}Am is evaluated to be 4.4min. The outline of the gas-jet coupled JAERI-ISOL system and typical performance are given. (author)

40 CFR Table 3 to Subpart Ec of... - Operating Parameters To Be Monitored and Minimum Measurement and Recording Frequencies

Science.gov (United States)

2010-07-01

... Which Construction is Commenced After June 20, 1996 Pt. 60, Subpt. Ec, Table 3 Table 3 to Subpart Ec of... Operating parameters to be monitored Minimum frequency Data measurement Data recording Control system Dry scrubber followed by fabric filter Wet scrubber Dry scrubber followed by fabric filter and wet scrubber...

Nanoscale Control of Exchange Bias with BiFeO3 Thin Films

NARCIS (Netherlands)

Martin, Lane W.; Chu, Ying-Hao; Holcomb, Mikel B.; Huijben, Mark; Yu, Pu; Han, Shu-Jen; Lee, Donkoun; Wang, Shan X.; Ramesh, R.

2008-01-01

We demonstrate a direct correlation between the domain structure of multiferroic BiFeO3 thin films and exchange bias of Co0.9Fe0.1/BiFeO3 heterostructures. Two distinct types of interactions − an enhancement of the coercive field (exchange enhancement) and an enhancement of the coercive field

Crystallization and atomic diffusion behavior of high coercive Ta/Nd-Fe-B/Ta-based permanent magnetic thin film

Energy Technology Data Exchange (ETDEWEB)

Tian, Na; Zhang, Xiao; You, Caiyin; Fu, Huarui [Xi' an University of Technology, School of Materials Science and Engineering, Xi' an (China); Shen, Qianlong [Logistics University of People' s Armed Police Force, Tianjin (China)

2017-06-15

A high coercivity of about 20.4 kOe was obtained through post-annealing the sputtered Ta/Nd-Fe-B/Ta-based permanent magnetic thin films. Transmission electron microscopy (TEM) and X-ray photoelectron spectroscopy (XPS) analyses were performed to investigate the crystallization and atomic diffusion behaviors during post-annealing. The results show that the buffer and capping Ta layers prefered to intermix with Fe and B atoms, and Nd tends to be combined with O atoms. The preferred atomic combination caused the appearance of the soft magnetic phase of Fe-Ta-B, resulting in a kink of the second quadratic magnetic hysteresis loop. The preferred atomic diffusion and phase formation of the thin films were well explained in terms of the formation enthalpy of the various compounds. (orig.)

Two investigations concerning the release of tritium. I. Tritium leakage from 3H(Sc) EC-detectors

International Nuclear Information System (INIS)

Bergman, C.; Wesslen, E.

1977-01-01

Recently the manufacturers of EC-detectors for gas chromatographs introduced a new type of 3 H EC-detector where the tritium is bound to scandium instead of to titanium and has an activity up to 1 Ci. It is expected that the scandium-based detector will take a great part of the Swedish EC-detector market. The Swedish National Institute of Radiation Protection is anxious to make sure that the introduction of the new detector, which will be used at higher temperature, will not give rise to any increased risk of tritium intake to the personnel handling the chromatographs. The leakage of tritium from commercially available 3 H(Sc) EC-detectors containing 1 Ci of tritium was measured as a function of the detector temperature. Tritium appears both in the form of tritium gas dissolved in the scandium and in the form of tritide. The gas evaporates rather easily with increasing temperature while the dissociation of the tritide is a slower process. The evaporation of tritium due to the dissociation of the tritide was found to be negligible, less than 0.2 μCi/h at temperatures less than 100 0 C, but rises rapidly with temperature. The study also showed that even when the detector is stored at room temperature, a re-distribution of the tritium occures, from the tritide to the dissolved tritium gas, which then easily evaporates even at moderately elevated temperatures

Swedish healthcare providers' perceptions of preconception expanded carrier screening (ECS)-a qualitative study.

Science.gov (United States)

Matar, A; Kihlbom, U; Höglund, A T

2016-07-01

Reproductive autonomy, medicalization, and discrimination against disabled and parental responsibility are the main ongoing ethical debates concerning reproductive genetic screening. To examine Swedish healthcare professionals' views on preconception expanded carrier screening (ECS), a qualitative study involving academic and clinical institutions in Sweden was conducted in September 2014 to February 2015. Eleven healthcare professionals including clinicians, geneticists, a midwife, and a genetic counselor were interviewed in depth using a semi-structured interview guide. The questionnaire was constructed after reviewing the main literature and meetings with relevant healthcare providers. The interviews were recorded, transcribed verbatim, and content analyzed for categories and subcategories. Participants nurtured many ethical and non-ethical concerns regarding preconception ECS. Among the ethical concerns were the potential for discrimination, medicalization, concerns with prioritization of healthcare resources, and effects on reproductive freedom. The effects of implementation of preconception ECS, its stakeholders, regulations, and motivation are some of non-ethical concerns. These concerns, if not addressed, may affect the uptake and usage of carrier screening within Swedish healthcare system. As this is a qualitative study with a small non-random sample size, the findings cannot be generalized. The participants had little to no working experience with expanded screening panels. Moreover, the interviews were conducted in English, a second language for the participants, which might have limited the expression of their views. However, the authors claim that the findings may be pertinent to similar settings in other Scandinavian countries.

Environmental Quality Standards in the EC-Water Framework Directive

DEFF Research Database (Denmark)

Jirka, Gerhard H.; Burrows, Richard; Larsen, Torben

2004-01-01

The "combined approach" in the new EC-Water Framework Directive(WFD) consisting of environmental quality standards in addition to emission limit values promises improvements in the quality characteristics of surface water. However, the specification of where in the water body the environmental...... quality standards apply is missing in the WFD. The omission will limit its administrative implementation. A clear mixing zone regulation is needed so that the quality objectives of the WFD are not jeopardized. This need is demonstrated using the examples of point source discharges into rivers and coastal...

Magnetic-field-dependent morphology of self-organized Fe on stepped Si(111) surfaces

International Nuclear Information System (INIS)

Cougo dos Santos, M.; Geshev, J.; Pereira, L. G.; Schmidt, J. E.

2009-01-01

The present work reports on Fe thin films grown on vicinal Si(111) substrates via rf magnetron sputtering. The dependencies of the growth mode and magnetic properties of the obtained iron nanostructures on both crystallographic surface orientation and on the direction of the very weak stray magnetic field from the magnetron gun were studied. Scanning tunneling microscopy images showed strong dependence of the Fe grains' orientation on the stray field direction in relation to the substrate's steps demonstrating that, under appropriately directed magnetic field, Si surfaces can be used as templates for well-defined self-assembled iron nanostructures. Magneto-optical Kerr effect hysteresis loops showed an easy-axis coercivity almost one order of magnitude smaller for the film deposited with stray field applied along the steps, accompanied with a change in the magnetization reversal mode. Phenomenological models involving coherent rotation and/or domain-wall unpinning were used for the interpretation of these results.

Potentially coercive self-citation by peer reviewers: a cross-sectional study.

Science.gov (United States)

Thombs, Brett D; Levis, Alexander W; Razykov, Ilya; Syamchandra, Achyuth; Leentjens, Albert F G; Levenson, James L; Lumley, Mark A

2015-01-01

Peer reviewers sometimes request that authors cite their work, either appropriately or via coercive self-citation to highlight the reviewers' work. The objective of this study was to determine in peer reviews submitted to one biomedical journal (1) the extent of peer reviewer self-citation; (2) the proportion of reviews recommending revision or acceptance versus rejection that included reviewer self-citations; and (3) the proportion of reviewer self-citations versus citations to others that included a rationale. Peer reviews for manuscripts submitted in 2012 to the Journal of Psychosomatic Research were evaluated. Data extraction was performed independently by two investigators. There were 616 peer reviews (526 reviewers; 276 manuscripts), of which 444 recommended revision or acceptance and 172 rejection. Of 428 total citations, there were 122 peer reviewer self-citations (29%) and 306 citations to others' work (71%). Self-citations were more common in reviews recommending revision or acceptance (105 of 316 citations; 33%) versus rejection (17/112; 15%; pcitations with no rationale (26 of 122; 21%) was higher than for citations to others' work (15 of 306; 5%; pcitation in peer reviews is common and may reflect a combination of appropriate citation to research that should be cited in published articles and inappropriate citation intended to highlight the work of the peer reviewer. Providing instructions to peer reviewers about self-citation and asking them to indicate when and why they have self-cited may help to limit self-citation to appropriate, constructive recommendations. Copyright © 2014 Elsevier Inc. All rights reserved.

Translation, data quality, reliability, validity and responsiveness of the Norwegian version of the Effective Musculoskeletal Consumer Scale (EC-17

Directory of Open Access Journals (Sweden)

Kristjansson Elizabeth

2010-01-01

Full Text Available Abstract Background The Effective Musculoskeletal Consumer Scale (EC-17 is a self-administered questionnaire for evaluating self-management interventions that empower and educate people with rheumatic conditions. The aim of the study was to translate and evaluate the Norwegian version of EC-17 against the necessary criteria for a patient-reported outcome measure, including responsiveness to change. Methods Data quality, reliability, validity and responsiveness were assessed in two groups. One group comprising 103 patients received a questionnaire before and at the end of a self-management programme. The second group comprising 96 patients' received the questionnaire two weeks before and on arrival of the program. Internal consistency and test-retest reliability were assessed. Construct validity was assessed through comparisons with the Brief Approach/Avoidance Coping Questionnaire, (BACQ, the Emotional Approach Coping Scale (EAC and the General Health Questionnaire (GHQ-20. Responsiveness was assessed with the Standardised Response Mean (SRM. Results Respondents included 66 (64% and 52 (54% patients from the first and second groups respectively. Levels of missing data were low for all items. There was good evidence for unidimensionality, item-total correlations ranged from 0.59 to 0.82 and Cronbach's Alpha and test-retest correlations were over 0.90. As hypothesised EC-17 scores had statistically significant low to moderate correlations with the BACQ, EAC and GHQ-20 in the range 0.26 to 0.42. Following the self-management program, EC-17 scores showed a significant improvement with an SRM of 0.48. Conclusion The Norwegian version of the EC-17 has evidence for data quality, internal consistency and test-retest reliability, construct validity and responsiveness to change. The EC-17 seems promising as an outcome measure for evaluating self-management interventions for people with rheumatic conditions, but further studies are needed.

Translation, data quality, reliability, validity and responsiveness of the Norwegian version of the Effective Musculoskeletal Consumer Scale (EC-17).

Science.gov (United States)

Hamnes, Bente; Garratt, Andrew; Kjeken, Ingvild; Kristjansson, Elizabeth; Hagen, Kåre B

2010-01-29

The Effective Musculoskeletal Consumer Scale (EC-17) is a self-administered questionnaire for evaluating self-management interventions that empower and educate people with rheumatic conditions. The aim of the study was to translate and evaluate the Norwegian version of EC-17 against the necessary criteria for a patient-reported outcome measure, including responsiveness to change. Data quality, reliability, validity and responsiveness were assessed in two groups. One group comprising 103 patients received a questionnaire before and at the end of a self-management programme. The second group comprising 96 patients' received the questionnaire two weeks before and on arrival of the program. Internal consistency and test-retest reliability were assessed. Construct validity was assessed through comparisons with the Brief Approach/Avoidance Coping Questionnaire, (BACQ), the Emotional Approach Coping Scale (EAC) and the General Health Questionnaire (GHQ-20). Responsiveness was assessed with the Standardised Response Mean (SRM). Respondents included 66 (64%) and 52 (54%) patients from the first and second groups respectively. Levels of missing data were low for all items. There was good evidence for unidimensionality, item-total correlations ranged from 0.59 to 0.82 and Cronbach's Alpha and test-retest correlations were over 0.90. As hypothesised EC-17 scores had statistically significant low to moderate correlations with the BACQ, EAC and GHQ-20 in the range 0.26 to 0.42. Following the self-management program, EC-17 scores showed a significant improvement with an SRM of 0.48. The Norwegian version of the EC-17 has evidence for data quality, internal consistency and test-retest reliability, construct validity and responsiveness to change. The EC-17 seems promising as an outcome measure for evaluating self-management interventions for people with rheumatic conditions, but further studies are needed.