Industrial entrepreneurial network: Structural and functional analysis

Science.gov (United States)

Medvedeva, M. A.; Davletbaev, R. H.; Berg, D. B.; Nazarova, J. J.; Parusheva, S. S.

2016-12-01

Structure and functioning of two model industrial entrepreneurial networks are investigated in the present paper. One of these networks is forming when implementing an integrated project and consists of eight agents, which interact with each other and external environment. The other one is obtained from the municipal economy and is based on the set of the 12 real business entities. Analysis of the networks is carried out on the basis of the matrix of mutual payments aggregated over the certain time period. The matrix is created by the methods of experimental economics. Social Network Analysis (SNA) methods and instruments were used in the present research. The set of basic structural characteristics was investigated: set of quantitative parameters such as density, diameter, clustering coefficient, different kinds of centrality, and etc. They were compared with the random Bernoulli graphs of the corresponding size and density. Discovered variations of random and entrepreneurial networks structure are explained by the peculiarities of agents functioning in production network. Separately, were identified the closed exchange circuits (cyclically closed contours of graph) forming an autopoietic (self-replicating) network pattern. The purpose of the functional analysis was to identify the contribution of the autopoietic network pattern in its gross product. It was found that the magnitude of this contribution is more than 20%. Such value allows using of the complementary currency in order to stimulate economic activity of network agents.

On industrial application of structural reliability theory

Energy Technology Data Exchange (ETDEWEB)

Thoft-Christensen, P

1998-06-01

In this paper it is shown that modern structural reliability theory is being successfully applied to a number of different industries. This review of papers is in no way complete. In the literature there is a large number of similar applications and also application not touched on in this presentation. There has been some concern among scientists from this area that structural reliability theory is not being used by industry. It is probably correct that structural reliability theory is not being used by industry as much as it should be used. However, the work by the ESReDA Working Group clearly shows the vary wide application of structural reliability theory by many different industries. One must also have in mind that industry often is reluctant to publish data related to safety and reliability. (au) 32 refs.

Inter- and intra-industry variations of capital structure in the Czech manufacturing industry

Directory of Open Access Journals (Sweden)

Pavlína Pinková

2013-01-01

Full Text Available The objective of the paper is to investigate the existence of inter-industry variations in the capital structure of enterprises of the Czech manufacturing industry and to identify the intra-industry causes of these differences. Three measures of capital structure are employed to determine the inter-industry variations. These are total debt ratio, long-term debt and short-term debt ratios. The set of explanatory variables is included to clarify the intra-industry variations. These explanatory variables are size, asset structure, asset utilization, profitability, non-debt tax shield and growth. The paper reports the analysis of capital structure of five distinctive industrial branches, namely the manufacture of beverages, the manufacture of textiles, the manufacture of paper and paper products, the manufacture of chemicals and chemical products, and the manufacture of computer, electronic and optical products. The data come from the financial statements of selected companies and cover a period from 2008 to 2012. The analysis of variance, correlation and regression analyses are used to develop the statistical framework. The paper aims to study the impact of industry and firm characteristics on capital structure choice.

Industrial structural transformation and carbon dioxide emissions in China

International Nuclear Information System (INIS)

Zhou, Xiaoyan; Zhang, Jie; Li, Junpeng

2013-01-01

Using provincial panel data from the period 1995–2009 to analyze the relationship between the industrial structural transformation and carbon dioxide emissions in China, we find that the first-order lag of industrial structural adjustment effectively reduced the emissions; technical progress itself did not reduce the emissions, but indirectly led to decreasing emissions through the upgrading and optimization of industrial structure. Foreign direct investment and intervention by local governments reduced carbon dioxide emissions, but urbanization significantly increased the emissions. Thus, industrial structural adjustment is an important component of the development of a low-carbon economy. In the context of industrial structural transformation, an effective way to reduce a region’s carbon dioxide emissions is to promote the upgrading and optimization of industrial structure through technical progress. Tighter environmental access policies, selective utilization of foreign direct investment, and improvements in energy efficiency can help to reduce carbon dioxide emissions. - Highlights: ► Relationship between the transformation of industrial structure and CO 2 emissions in China. ► Dynamic panel data model. ► Industrial structural adjustments can effectively reduce current CO 2 emissions. ► Technical progress leads to decreasing CO 2 emissions through upgrading of industrial structure

A Structural Modeling Approach to a Multilevel Random Coefficients Model.

Science.gov (United States)

Rovine, Michael J.; Molenaar, Peter C. M.

2000-01-01

Presents a method for estimating the random coefficients model using covariance structure modeling and allowing one to estimate both fixed and random effects. The method is applied to real and simulated data, including marriage data from J. Belsky and M. Rovine (1990). (SLD)

Industrial CO2 emissions from energy use in Korea: A structural decomposition analysis

International Nuclear Information System (INIS)

Lim, Hea-Jin; Yoo, Seung-Hoon; Kwak, Seung-Jun

2009-01-01

This paper attempts to quantify energy consumption and CO 2 emissions in the industrial sectors of Korea. The sources of the changes in CO 2 emissions for the years 1990-2003 are investigated, in terms of a total of eight factors, through input-output structural decomposition analysis: changes in emission coefficient (caused by shifts in energy intensity and carbon intensity); changes in economic growth; and structural changes (in terms of shifts in domestic final demand, exports, imports of final and intermediate goods, and production technology). The results show that the rate of growth of industrial CO 2 emissions has drastically decreased since the 1998 financial crisis in Korea. The effect on emission reductions due to changes in energy intensity and domestic final demand surged in the second period (1995-2000), while the impact of exports steeply rose in the third period (2000-2003). Of all the individual factors, economic growth accounted for the largest increase in CO 2 emissions. The results of this analysis can be used to infer the potential for emission-reduction in Korea

Near-unity mass accommodation coefficient of organic molecules of varying structure.

Science.gov (United States)

Julin, Jan; Winkler, Paul M; Donahue, Neil M; Wagner, Paul E; Riipinen, Ilona

2014-10-21

Atmospheric aerosol particles have a significant effect on global climate, air quality, and consequently human health. Condensation of organic vapors is a key process in the growth of nanometer-sized particles to climate relevant sizes. This growth is very sensitive to the mass accommodation coefficient α, a quantity describing the vapor uptake ability of the particles, but knowledge on α of atmospheric organics is lacking. In this work, we have determined α for four organic molecules with diverse structural properties: adipic acid, succinic acid, naphthalene, and nonane. The coefficients are studied using molecular dynamics simulations, complemented with expansion chamber measurements. Our results are consistent with α = 1 (indicating nearly perfect accommodation), regardless of the molecular structural properties, the phase state of the bulk condensed phase, or surface curvature. The results highlight the need for experimental techniques capable of resolving the internal structure of nanoparticles to better constrain the accommodation of atmospheric organics.

Molecular Descriptors Family on Structure Activity Relationships 6. Octanol-Water Partition Coefficient of Polychlorinated Biphenyls

Directory of Open Access Journals (Sweden)

Lorentz JÄNTSCHI

2006-01-01

Full Text Available Octanol-water partition coefficient of two hundred and six polychlorinated biphenyls was model by the use of an original method based on complex information obtained from compounds structure. The regression analysis shows that best results are obtained in four-varied model (r2 = 0.9168. The prediction ability of the model was studied through leave-one-out analysis (r2cv(loo = 0.9093 and in training and test sets analysis. Modeling the octanol-water partition coefficient of polychlorinated biphenyls by integration of complex structural information provide a stable and performing four-varied model, allowing us to make remarks about relationship between structure of polychlorinated biphenyls and associated octanol-water partition coefficients.

Computer Simulation of Atoms Nuclei Structure Using Information Coefficients of Proportionality

OpenAIRE

Labushev, Mikhail M.

2012-01-01

The latest research of the proportionality of atomic weights of chemical elements made it possible to obtain 3 x 3 matrices for the calculation of information coefficients of proportionality Ip that can be used for 3D modeling of the structure of atom nucleus. The results of computer simulation show high potential of nucleus structure research for the characterization of their chemical and physical properties.

Variation of solubility, biokinetics and dose coefficient of industrial uranium oxides according to the specific surface area

International Nuclear Information System (INIS)

Chazel, V.; Houpert, P.; Ansorbolo, E.; Henge-Napoli, M.H.; Paquet, F.

2000-01-01

The in vitro solubility, absorption to blood, lung retention and dose coefficient of industrial UO 2 samples were studied as a function of the specific surface area (SSA) of the particles. An in vitro study has been carried out on two samples of industrial UO 4 to compare the results with those obtained with UO 2 . Ten UO 2 samples supplied by different fuel factories or research laboratories, presented specific surface areas from 1.00 to 4.45 m 2 .g -1 . The wide range of values of SSA was due to the different conditions of fabrication. Dissolution tests in cell culture medium made on these ten samples have shown that the solubility increased 2.5-fold when the SSA increased 1.7-fold. The same tendency has been found for UO 4 , a soluble compound, and for U 3 O 8 , a moderately soluble compound. Four in vivo experiments carried out on rats by intratracheal instillation of dust suspensions of UO 2 , have highlighted the decrease in lung retention and the increase of absorption to blood with the SSA. The experimental absorption parameters calculated from the in vivo data allowed specific dose coefficients to be obtained which decreased from 6.6 to 4.3 μSv.Bq -1 when the SSA increased from 1.60 to 3.08 m 2 .g -1 . Thus, the medical monitoring of workers at the workplace has to take into account any change in the fabrication process of the uranium compound which can affect the physiochemical properties and consequently the dose coefficient. (author)

Thermal linear expansion coefficient of structural graphites

International Nuclear Information System (INIS)

Virgil'ev, Yu.S.

1995-01-01

The data now available on radiation induced changes of linear thermal expansion coefficients (CTE) for native structural carbon materials (SCM) irradiated with high fluences are summarized. For different types of native and foreign SCM dose dependences of CTE changes in the temperature range of 300...1600 K and at fluences up to (2...3)x10 22 n/cm 2 (E>0.18 meV) are compared. On the base of this comparison factors defined the CTE changes under neutron irradiation are revealed and the explanation of observed phenomena is offered. Large number of the factors revealed does not allowed to calculate CTE radiation induced changes. 39 refs.; 16 figs.; 5 tabs

Accelerated Electron-Beam Formation with a High Capture Coefficient in a Parallel Coupled Accelerating Structure

Science.gov (United States)

Chernousov, Yu. D.; Shebolaev, I. V.; Ikryanov, I. M.

2018-01-01

An electron beam with a high (close to 100%) coefficient of electron capture into the regime of acceleration has been obtained in a linear electron accelerator based on a parallel coupled slow-wave structure, electron gun with microwave-controlled injection current, and permanent-magnet beam-focusing system. The high capture coefficient was due to the properties of the accelerating structure, beam-focusing system, and electron-injection system. Main characteristics of the proposed systems are presented.

Industrial safety: its structuring and content

International Nuclear Information System (INIS)

Munoz, A.; Rodriguez, J.; Martinez-Val, J.M.

1999-01-01

Industrial development has led to an on-going increase in productivity, but the concept of safety has also become highly relevant. In this article, the authors address the structuring and content of industrial safety which involves laying down essential safety requirements, both in manufacturing and processes and in products. (Author)

Highlighting material structure with transmission electron diffraction correlation coefficient maps.

Science.gov (United States)

Kiss, Ákos K; Rauch, Edgar F; Lábár, János L

2016-04-01

Correlation coefficient maps are constructed by computing the differences between neighboring diffraction patterns collected in a transmission electron microscope in scanning mode. The maps are shown to highlight material structural features like grain boundaries, second phase particles or dislocations. The inclination of the inner crystal interfaces are directly deduced from the resulting contrast. Copyright © 2016 Elsevier B.V. All rights reserved.

Comprehensive evaluation of industrial CO2 emission (1989-2004) in Taiwan by input-output structural decomposition

International Nuclear Information System (INIS)

Chang, Yih F.; Lewis, Charles; Lin, Sue J.

2008-01-01

Taiwan currently emits approximately 1% of the world's CO 2 - ranking it 22nd among nations. Herein, we use the input-output (I-O) structural decomposition method to examine the changes in CO 2 emission over a 15-year period. By decomposing the CO 2 emission changes into nine factors for the periods of 1989-1994, 1994-1999, and 1999-2004, we have identified the key factors causing the emission changes, as well as the most important trends regarding the industrial development process in Taiwan. The 5-year increment with the largest increase of CO 2 emission was that of 1999-2004, due to the rapid increase of electricity consumption. From the decomposition, the industrial energy coefficient and the CO 2 emission factors were identified as the most important parameters for the determination of the highway, petrochemical materials, iron and steel, the commercial sector, and electric machinery as the major sources of increased CO 2 emission during the past 15 years. From 1989 to 2004, the level of exports and the level of domestic final demand were the largest contributors to the increase in the total increment of CO 2 change. During 1989-2004, the industrial energy coefficient and CO 2 emission factors, being minimally significant during 1989-1994, became extremely important, joining the domestic final demand and the level of exports factors as the major causes of the increase increment of CO 2 . This indicates a heavy reliance upon high-energy (and CO 2 ) intensity for Taiwanese industries; therefore, continuous efforts to improve energy intensity and fuel mix toward lower carbon are important for CO 2 reduction, especially for the electricity and power generation sectors. Relevant strategies for reducing carbon dioxide emissions from major industries are also highlighted. (author)

Manufacturing sector carbon dioxide emissions in nine OECD countries 1973--87: A Divisia index decomposition to changes in fuel mix, emission coefficients, industry structure, energy intensities, and international structure

International Nuclear Information System (INIS)

Torvanger, A.

1990-11-01

In this paper the reduction in energy-related manufacturing carbon dioxide emissions for nine OECD countries in the period 1973 to 1987 is analyzed. Carbon dioxide emissions are estimated from energy use data. The emphasis is on carbon dioxide intensities, defined as emissions divided by value added. The overall manufacturing carbon dioxide intensity for the nine OECD countries was reduced by 42% in the period 1973--1987. Five fuels are specified together with six subsectors of manufacturing. Carbon dioxide emissions are estimated from fossil fuel consumption, employing emissions coefficients for gas, oil and solids. In addition, electricity consumption is specified. For electricity use an emission coefficient index is calculated from the shares of fossil fuels, nuclear power and hydro power used to generate electricity, and the efficiency in electricity generation from these energy sources. A Divisia index approach is used to sort out the contribution to reduced carbon dioxide intensity from different components. The major finding is that the main contribution to reduced carbon dioxide intensity is from the general reduction in manufacturing energy intensity, most likely driven by economic growth and increased energy prices, giving incentives to invest in new technology and new industrial processes. There is also a significant contribution from reduced production in the most carbon dioxide intensive subsectors, and a contribution from higher efficiency in electricity generation together with a larger nuclear power share at the expense of oil. 19 refs., 5 figs., 11 tabs

Experimental Investigation of Discharge Coefficient in Mesh Panel Bottom Intakes

Directory of Open Access Journals (Sweden)

keivan bina

2012-04-01

Full Text Available Bottom racks is a hydraulic structure which is placed in the bed of stream through which, part of flow in the main channel is diverted. These structures have very wide application in industry, irrigation, drainage and etc. Of course much attention had been paid to the study of such structures, but characteristics of flow through bottom racks are complex. The present study was directed to estimate the discharge coefficient of a new kind of bottom racks including both transverse and longitudinal bars that named "mesh panel racks" without considering any solids in the fluid. This kind of bottom intake has advantages from structural point of view and has less deformation under static and dynamic loads. Laboratory setup with three mesh panel intakes was built and the effects of various parameters such as racks slope, porosity and geometry were explored. A dimensional analysis using Buckingham theory showed the effective hydraulic and geometric factors that affect the discharge coefficient (Cd of bottom racks. Then, a statistical approach to determine the discharge coefficient of a rack structure was developed with linear and nonlinear regression using SPSS software. The efficiency of the proposed technique is high enough that the associated error is limited to 10%. Finally, hydraulic performance of mesh panel intakes was compared with regular type of bottom intakes, which consist of longitudinal bars. For this purpose, diverted discharge through both type of intakes calculated in same situation

Coefficient Alpha: A Reliability Coefficient for the 21st Century?

Science.gov (United States)

Yang, Yanyun; Green, Samuel B.

2011-01-01

Coefficient alpha is almost universally applied to assess reliability of scales in psychology. We argue that researchers should consider alternatives to coefficient alpha. Our preference is for structural equation modeling (SEM) estimates of reliability because they are informative and allow for an empirical evaluation of the assumptions…

Comprehensive evaluation of industrial CO{sub 2} emission (1989-2004) in Taiwan by input-output structural decomposition

Energy Technology Data Exchange (ETDEWEB)

Chang, Yih F. [Department of Tourism and Management, Chia-Nan University of Pharmacy and Science, Tainan 717 (China); Lewis, Charles [Department of Resources Engineering, National Cheng Kung University, Tainan 701 (China); Lin, Sue J. [Department of Environmental Engineering, National Cheng Kung University, Tainan 701 (China)

2008-07-15

Taiwan currently emits approximately 1% of the world's CO{sub 2} - ranking it 22nd among nations. Herein, we use the input-output (I-O) structural decomposition method to examine the changes in CO{sub 2} emission over a 15-year period. By decomposing the CO{sub 2} emission changes into nine factors for the periods of 1989-1994, 1994-1999, and 1999-2004, we have identified the key factors causing the emission changes, as well as the most important trends regarding the industrial development process in Taiwan. The 5-year increment with the largest increase of CO{sub 2} emission was that of 1999-2004, due to the rapid increase of electricity consumption. From the decomposition, the industrial energy coefficient and the CO{sub 2} emission factors were identified as the most important parameters for the determination of the highway, petrochemical materials, iron and steel, the commercial sector, and electric machinery as the major sources of increased CO{sub 2} emission during the past 15 years. From 1989 to 2004, the level of exports and the level of domestic final demand were the largest contributors to the increase in the total increment of CO{sub 2} change. During 1989-2004, the industrial energy coefficient and CO{sub 2} emission factors, being minimally significant during 1989-1994, became extremely important, joining the domestic final demand and the level of exports factors as the major causes of the increase increment of CO{sub 2}. This indicates a heavy reliance upon high-energy (and CO{sub 2}) intensity for Taiwanese industries; therefore, continuous efforts to improve energy intensity and fuel mix toward lower carbon are important for CO{sub 2} reduction, especially for the electricity and power generation sectors. Relevant strategies for reducing carbon dioxide emissions from major industries are also highlighted. (author)

The Tree of Industrial Life

DEFF Research Database (Denmark)

Andersen, Esben Sloth

2002-01-01

The purpose of this paper is to bring forth an interaction between evolutionary economics and industrial systematics. The suggested solution is to reconstruct the "family tree" of the industries. Such a tree is based on similarities, but it may also reflect the evolutionary history in industries....... For this purpose the paper shows how matrices of input-output coefficients can be transformed into binary characteristics matrices and to distance matrices, and it also discusses the possible evolutionary meaning of this translation. Then these derived matrices are used as inputs to algorithms for the heuristic...... finding of optimal industrial trees. The results are presented as taxonomic trees that can easily be compared with the hierarchical structure of existing systems of industrial classification....

Economic development and industrial structure - an overview

Energy Technology Data Exchange (ETDEWEB)

Nordaas, Hildegunn Kyvik

1997-09-01

The essay offers a selective review of central issues related to economic growth. The interrelationship between technological progress, capital accumulation, specialisation and industrial structure is emphasised. It is concluded that, first, there is little evidence that industrial structure plays an independent role in growth. Second, economists have been more successful in explaining the consequence of technological progress than the determinants of technological progress. However, even the consequences are not well understood and there is still a long way to go before general and well-documented policy implications can be drawn. (Author)

Review of Industrial Applications of Structural Reliability Theory

DEFF Research Database (Denmark)

Thoft-Christensen, Palle

For the last two decades we have seen an increasing interest in applying structural reliability theory to many different industries. However, the number of real practical applications is much smaller than what one would expect.......For the last two decades we have seen an increasing interest in applying structural reliability theory to many different industries. However, the number of real practical applications is much smaller than what one would expect....

Market Structure, Financial Dependence and Industrial Growth: Evidence from the Banking Industry in Emerging Asian Economies.

Science.gov (United States)

Khan, Habib Hussain; Ahmad, Rubi Binit; Gee, Chan Sok

2016-01-01

In this study, we examine the role of market structure for growth in financially dependent industries from 10 emerging Asian economies over the period of 1995-2011. Our approach departs from existing studies in that we apply four alternative measures of market structure based on structural and non-structural approaches and compare their outcomes. Results indicate that higher bank concentration may slow down the growth of financially dependent industries. Bank competition on the other hand, allows financially dependent industries to grow faster. These findings are consistent across a number of sensitivity checks such as alternative measures of financial dependence, institutional factors (including property rights, quality of accounting standards and bank ownership), and endogeneity consideration. In sum, our study suggests that financially dependent industries grow more in more competitive/less concentrated banking systems. Therefore, regulatory authorities need to be careful while pursuing a consolidation policy for banking sector in emerging Asian economies.

The negative temperature coefficient resistivities of Ag2S-Ag core–shell structures

International Nuclear Information System (INIS)

Yu, Mingming; Liu, Dongzhi; Li, Wei; Zhou, Xueqin

2014-01-01

In this paper, the conductivity of silver nanoparticle films protected by 3-mercaptopropionic acid (Ag/MPA) has been investigated. When the nanoparticles were annealed in air at 200 °C, they converted to stable Ag 2 S-Ag core–shell structures. The mechanism for the formation of the Ag 2 S-Ag core–shell structures along with the compositional changes and the microstructural evolution of the Ag/MPA nanoparticles during the annealing process are discussed. It is proposed that the Ag 2 S-Ag core–shell structure was formed through a solid-state reduction reaction, in which the Ag + ions coming from Ag 2 S were reduced by sulfonate species and sulfur ions. The final Ag 2 S-Ag films display an exponentially decreased resistivity with increasing temperature from 25 to 170 °C. The negative temperature coefficient resistivity of Ag 2 S-Ag films can be adjusted by changing the S/Ag molar ratio used for the synthesis of the Ag/MPA nanoparticles, paving the way for the preparation of negative temperature-coefficient thermistors via printing technology for use in the electronics.

A drying coefficient for building materials

DEFF Research Database (Denmark)

Scheffler, Gregor Albrecht; Plagge, Rudolf

2009-01-01

coefficient is defined which can be determined based on measured drying data. The correlation of this coefficient with the water absorption and the vapour diffusion coefficient is analyzed and its additional information content is critically challenged. As result, a drying coefficient has been derived......The drying experiment is an important element of the hygrothermal characterisation of building materials. Contrary to other moisture transport experiments as the vapour diffusion and the water absorption test, it is until now not possible to derive a simple coefficient for the drying. However......, in many cases such a coefficient would be highly appreciated, e.g. in interaction of industry and research or for the distinction and selection of suitable building materials throughout design and practise. This article first highlights the importance of drying experiments for hygrothermal...

Organization, structure, and performance in the US nuclear power industry

International Nuclear Information System (INIS)

Lester, R.K.

1986-01-01

Several propositions are advanced concerning the effects of industry organization and structure on the economic performance of the American commercial nuclear power industry. Both the electric utility industry and the nuclear power plant supply industry are relatively high degree of horizontal disaggregation. The latter is also characterized by an absence of vertical integration. The impact of each of these factors on construction and operating performance is discussed. Evidence is presented suggesting that the combination of horizontal and vertical disaggregation in the industry has had a significant adverse effect on economic performance. The relationship between industrial structure and regulatory behavior is also discussed. 43 references, 4 figures, 9 tables

Determination of the transmission coefficients for quantum structures using FDTD method.

Science.gov (United States)

Peng, Yangyang; Wang, Xiaoying; Sui, Wenquan

2011-12-01

The purpose of this work is to develop a simple method to incorporate quantum effect in traditional finite-difference time-domain (FDTD) simulators. Witch could make it possible to co-simulate systems include quantum structures and traditional components. In this paper, tunneling transmission coefficient is calculated by solving time-domain Schrödinger equation with a developed FDTD technique, called FDTD-S method. To validate the feasibility of the method, a simple resonant tunneling diode (RTD) structure model has been simulated using the proposed method. The good agreement between the numerical and analytical results proves its accuracy. The effectness and accuracy of this approach makes it a potential method for analysis and design of hybrid systems includes quantum structures and traditional components.

Market Structure, Financial Dependence and Industrial Growth: Evidence from the Banking Industry in Emerging Asian Economies

Science.gov (United States)

Khan, Habib Hussain; Ahmad, Rubi Binit; Gee, Chan Sok

2016-01-01

In this study, we examine the role of market structure for growth in financially dependent industries from 10 emerging Asian economies over the period of 1995–2011. Our approach departs from existing studies in that we apply four alternative measures of market structure based on structural and non-structural approaches and compare their outcomes. Results indicate that higher bank concentration may slow down the growth of financially dependent industries. Bank competition on the other hand, allows financially dependent industries to grow faster. These findings are consistent across a number of sensitivity checks such as alternative measures of financial dependence, institutional factors (including property rights, quality of accounting standards and bank ownership), and endogeneity consideration. In sum, our study suggests that financially dependent industries grow more in more competitive/less concentrated banking systems. Therefore, regulatory authorities need to be careful while pursuing a consolidation policy for banking sector in emerging Asian economies. PMID:27490847

Market Structure, Financial Dependence and Industrial Growth: Evidence from the Banking Industry in Emerging Asian Economies.

Directory of Open Access Journals (Sweden)

Habib Hussain Khan

Full Text Available In this study, we examine the role of market structure for growth in financially dependent industries from 10 emerging Asian economies over the period of 1995-2011. Our approach departs from existing studies in that we apply four alternative measures of market structure based on structural and non-structural approaches and compare their outcomes. Results indicate that higher bank concentration may slow down the growth of financially dependent industries. Bank competition on the other hand, allows financially dependent industries to grow faster. These findings are consistent across a number of sensitivity checks such as alternative measures of financial dependence, institutional factors (including property rights, quality of accounting standards and bank ownership, and endogeneity consideration. In sum, our study suggests that financially dependent industries grow more in more competitive/less concentrated banking systems. Therefore, regulatory authorities need to be careful while pursuing a consolidation policy for banking sector in emerging Asian economies.

An economic prediction of the finer resolution level wavelet coefficients in electronic structure calculations.

Science.gov (United States)

Nagy, Szilvia; Pipek, János

2015-12-21

In wavelet based electronic structure calculations, introducing a new, finer resolution level is usually an expensive task, this is why often a two-level approximation is used with very fine starting resolution level. This process results in large matrices to calculate with and a large number of coefficients to be stored. In our previous work we have developed an adaptively refined solution scheme that determines the indices, where the refined basis functions are to be included, and later a method for predicting the next, finer resolution coefficients in a very economic way. In the present contribution, we would like to determine whether the method can be applied for predicting not only the first, but also the other, higher resolution level coefficients. Also the energy expectation values of the predicted wave functions are studied, as well as the scaling behaviour of the coefficients in the fine resolution limit.

The changing structure of the electric power industry: An update

Energy Technology Data Exchange (ETDEWEB)

NONE

1996-12-01

The U. S. electric power industry today is on the road to restructuring a road heretofore uncharted. While parallels can be drawn from similar journeys taken by the airline industry, the telecommunications industry, and, most recently, the natural gas industry, the electric power industry has its own unique set of critical issues that must be resolved along the way. The transition will be from a structure based on a vertically integrated and regulated monopoly to one equipped to function successfully in a competitive market. The long-standing traditional structure of the electric power industry is the result of a complex web of events that have been unfolding for over 100 years. Some of these events had far-reaching and widely publicized effects. Other major events took the form of legislation. Still other events had effects that are less obvious in comparison (e.g., the appearance of technologies such as transformers and steam and gas turbines, the invention of home appliances, the man-made fission of uranium), and it is likely that their significance in the history of the industry has been obscured by the passage of time. Nevertheless, they, too, hold a place in the underpinnings of today`s electric industry structure. The purpose of this report, which is intended for both lay and technical readers, is twofold. First, it is a basic reference document that provides a comprehensive delineation of the electric power industry and its traditional structure, which has been based upon its monopoly status. Second, it describes the industry`s transition to a competitive environment by providing a descriptive analysis of the factors that have contributed to the interest in a competitive market, proposed legislative and regulatory actions, and the steps being taken by the various components of the industry to meet the challenges of adapting to and prevailing in a competitive environment.

Understanding inter-industry wage structures in the euro area

OpenAIRE

Genre, Véronique; Momferatou, Daphne; Kohn, Karsten

2009-01-01

This paper focuses on the euro area wage structure and its potential determinants from a sectoral viewpoint. Merging information from the OECD Structural Analysis database with data from the EU Labour Force Survey, we construct a cross-country panel of 22 industries in 8 euro area countries for 1991-2002. Data inspection confirms the existence of a fairly stable inter- industry wage structure that is similar across countries. We then apply panel data techniques to identify factors explaining ...

The changing structure of the electric power industry: An update

International Nuclear Information System (INIS)

1996-12-01

The U. S. electric power industry today is on the road to restructuring a road heretofore uncharted. While parallels can be drawn from similar journeys taken by the airline industry, the telecommunications industry, and, most recently, the natural gas industry, the electric power industry has its own unique set of critical issues that must be resolved along the way. The transition will be from a structure based on a vertically integrated and regulated monopoly to one equipped to function successfully in a competitive market. The long-standing traditional structure of the electric power industry is the result of a complex web of events that have been unfolding for over 100 years. Some of these events had far-reaching and widely publicized effects. Other major events took the form of legislation. Still other events had effects that are less obvious in comparison (e.g., the appearance of technologies such as transformers and steam and gas turbines, the invention of home appliances, the man-made fission of uranium), and it is likely that their significance in the history of the industry has been obscured by the passage of time. Nevertheless, they, too, hold a place in the underpinnings of today's electric industry structure. The purpose of this report, which is intended for both lay and technical readers, is twofold. First, it is a basic reference document that provides a comprehensive delineation of the electric power industry and its traditional structure, which has been based upon its monopoly status. Second, it describes the industry's transition to a competitive environment by providing a descriptive analysis of the factors that have contributed to the interest in a competitive market, proposed legislative and regulatory actions, and the steps being taken by the various components of the industry to meet the challenges of adapting to and prevailing in a competitive environment

Changes in carbon intensity in China's industrial sector: Decomposition and attribution analysis

International Nuclear Information System (INIS)

Liu, Nan; Ma, Zujun; Kang, Jidong

2015-01-01

The industrial sector accounts for 70% of the total energy-related CO_2 emissions in China. To gain a better understanding of the changes in carbon intensity in China's industrial sector, this study first utilized logarithmic mean Divisia index (LMDI) decomposition analysis to disentangle the carbon intensity into three influencing factors, including the emission coefficient effect, the energy intensity effect, and the structure effect. Then, the analysis was furthered to explore the contributions of individual industrial sub-sectors to each factor by using an extension of the decomposition method proposed in Choi and Ang (2012). The results indicate that from 1996 to 2012, the energy intensity effect was the dominant factor in reducing carbon intensity, of which chemicals, iron and steel, metal and machinery, and cement and ceramics were the most representative sub-sectors. The structure effect did not show a strong impact on carbon intensity. The emission coefficient effect gradually increased the carbon intensity, mainly due to the expansion of electricity consumption, particularly in the metal and machinery and chemicals sub-sectors. The findings suggest that differentiated policies and measures should be considered for various industrial sub-sectors to maximize the energy efficiency potential. Moreover, readjusting the industrial structure and promoting clean and renewable energy is also urgently required to further reduce carbon intensity in China's industrial sector. - Highlights: • The study analyzed the changes in carbon intensity in China's industrial sector. • An extension of the Divisia index decomposition methodology was utilized. • Energy efficiency improvement was the dominant factor reducing carbon intensity. • The sub-sector contributions to the energy efficiency improvement varied markedly. • Emission coefficient growth can be mainly due to the expansion of electricity.

Industrial Structure, Menu Costs and the Non-Neutrality of Money

DEFF Research Database (Denmark)

Dixon, Huw David; Hansen, Claus Thustrup

by perfect competition. The mixed industrial structure implies that there is a misallocation of the input (labour) between sectors. Following a 5% monetary expansion, the menu costs required for price rigidity in the monopolistic sector can be 50 times smaller than in the symmetric case, while the ratio......New Keynesian literature assumes symmetric industrial structure when analysing explanations of monetary non-neutrality. We analyse the impact of modifying this assumption by allowing for a mixed industrial structure; some industries are characterized by monopolistic competition, and others...... of welfare gain to private loss can be as large as 200 times the corresponding symmetric case. This implies that in real world economies, menu costs may be even more significant than previously thought...

Industrial structure and privatisation of the Slovenian electricity industry

International Nuclear Information System (INIS)

Hrovatin, N.

1999-01-01

The paper first analyses the existing structure of the Slovenian electricity industry and gives recommendations for its restructuring so as to conform to efficiency criteria and to comply with European Union provisions on the internal European electricity market. Then the paper outlines the necessity for privatisation and draws some conclusions on it such as determination of market values companies, the proportion for sale, privatisation methods and the general public's participation [it

Non-destructive testing method for determining the solvent diffusion coefficient in the porous materials products

Science.gov (United States)

Belyaev, V. P.; Mishchenko, S. V.; Belyaev, P. S.

2018-01-01

Ensuring non-destructive testing of products in industry is an urgent task. Most of the modern methods for determining the diffusion coefficient in porous materials have been developed for bodies of a given configuration and size. This leads to the need for finished products destruction to make experimental samples from them. The purpose of this study is the development of a dynamic method that allows operatively determine the diffusion coefficient in finished products from porous materials without destroying them. The method is designed to investigate the solvents diffusion coefficient in building constructions from materials having a porous structure: brick, concrete and aerated concrete, gypsum, cement, gypsum or silicate solutions, gas silicate blocks, heat insulators, etc. A mathematical model of the method is constructed. The influence of the design and measuring device operating parameters on the method accuracy is studied. The application results of the developed method for structural porous products are presented.

Three Studies in Industrial Economics: Competition and Industry Structure

Science.gov (United States)

Keil, Jan

Chapter 1 reviews alternative theories of competition - the standard Neoclassical view, the contribution of the Chicago School as well as the two dynamic lines of thought which are part of Austrian economics and Classical Political Economy. The latter is presented as a consistent alternative to the other existing theories. Of special interest is the question if and how industry structure matters in these approaches, how profitability differentials are explained and what role market share concentration and mobility barriers play. Their predictions and implications for empirical research are compared. Ways to test and evaluate these different approaches are described. Chapter 2 investigates econometrically how industry and micro level variables determine persistent differentials in the rate of return on assets in the U.S. The analysis is the first to use business segment data to explain long term profitability differentials. It presents new market concentration indicators that are superior to concentration ratios and allow to analyze an unpreceded amount of concentration and other data back to 1977. Critical concentration levels, non-linearities, interaction effects and previously ignored important control variables like industrial unionization are being considered. Concentration is found to have significant negative effects on profitability differentials. Barrier indicators are insignificant while market shares are positively correlated with long-run profitability. Concentration thus increases, not diminishes the degree of industrial competition. This is interpreted as evidence in support of Classical Political Economic competition theory. Chapter 3 presents a costs of production based industry analytical study that aims at consistency with Classical Political Economic thought. It investigates how growth of renewable electricity in Germany forces conventional power plants to shift towards more flexible operating regimes. The simulation of individual power plant load

Analysis of costs structure of the industrial enterprise

Directory of Open Access Journals (Sweden)

Yuriy V. Kovtunenko

2014-12-01

Full Text Available Costs are an important factor that affects the economic activities of an industrial enterprise, because they affect the profits of the enterprise on production efficiency and competitiveness. The article aims to summarize approaches of the definition of “costs”, classification costs of the enterprise according to different characteristics and cost structure of industrial enterprises. Each scientist has his own opinion on the choice of the structure and classification of costs, which is based on his own experience and experience of other scientists. Economically justified classification of costs is an important factor for analysis and costs accounting. This paper examines the concept of “costs” in the interpretation of various authors based on research of scientists that highlight the main features of the classification of costs, give the cost structure of industrial enterprises. Based on the study it can be concluded that the standard classification of costs is not for all companies. Therefore, it is necessary to develop a classification of costs according to the main features of the company.

The changing structure of the international commercial nuclear power reactor industry

International Nuclear Information System (INIS)

Forsberg, C.W.; Hill, L.J.; Reich, W.J.; Rowan, W.J.

1992-12-01

The objective of this report is to provide an understanding of the international commercial nuclear power industry today and how the industry is evolving. This industry includes reactor vendors, product lines, and utility customers. The evolving structure of the international nuclear power reactor industry implies different organizations making decisions within the nuclear power industry, different outside constraints on those decisions, and different priorities than with the previous structure. At the same time, cultural factors, technical constraints, and historical business relationships allow for an understanding of the organization of the industry, what is likely, and what is unlikely. With such a frame of reference, current trends and future directions can be more readily understood

A study of hierarchical structure on South China industrial electricity-consumption correlation

Science.gov (United States)

Yao, Can-Zhong; Lin, Ji-Nan; Liu, Xiao-Feng

2016-02-01

Based on industrial electricity-consumption data of five southern provinces of China from 2005 to 2013, we study the industrial correlation mechanism with MST (minimal spanning tree) and HT (hierarchical tree) models. First, we comparatively analyze the industrial electricity-consumption correlation structure in pre-crisis and after-crisis period using MST model and Bootstrap technique of statistical reliability test of links. Results exhibit that all industrial electricity-consumption trees of five southern provinces of China in pre-crisis and after-crisis time are in formation of chain, and the "center-periphery structure" of those chain-like trees is consistent with industrial specialization in classical industrial chain theory. Additionally, the industrial structure of some provinces is reorganized and transferred in pre-crisis and after-crisis time. Further, the comparative analysis with hierarchical tree and Bootstrap technique demonstrates that as for both observations of GD and overall NF, the industrial electricity-consumption correlation is non-significant clustered in pre-crisis period, whereas it turns significant clustered in after-crisis time. Therefore we propose that in perspective of electricity-consumption, their industrial structures are directed to optimized organization and global correlation. Finally, the analysis of distance of HTs verifies that industrial reorganization and development may strengthen market integration, coordination and correlation of industrial production. Except GZ, other four provinces have a shorter distance of industrial electricity-consumption correlation in after-crisis period, revealing a better performance of regional specialization and integration.

Structure coefficients and strategy selection in multiplayer games.

Science.gov (United States)

McAvoy, Alex; Hauert, Christoph

2016-01-01

Evolutionary processes based on two-player games such as the Prisoner's Dilemma or Snowdrift Game are abundant in evolutionary game theory. These processes, including those based on games with more than two strategies, have been studied extensively under the assumption that selection is weak. However, games involving more than two players have not received the same level of attention. To address this issue, and to relate two-player games to multiplayer games, we introduce a notion of reducibility for multiplayer games that captures what it means to break down a multiplayer game into a sequence of interactions with fewer players. We discuss the role of reducibility in structured populations, and we give examples of games that are irreducible in any population structure. Since the known conditions for strategy selection, otherwise known as [Formula: see text]-rules, have been established only for two-player games with multiple strategies and for multiplayer games with two strategies, we extend these rules to multiplayer games with many strategies to account for irreducible games that cannot be reduced to those simpler types of games. In particular, we show that the number of structure coefficients required for a symmetric game with [Formula: see text]-player interactions and [Formula: see text] strategies grows in [Formula: see text] like [Formula: see text]. Our results also cover a type of ecologically asymmetric game based on payoff values that are derived not only from the strategies of the players, but also from their spatial positions within the population.

Dynamic analysis of an industrial structure with fluid-structure interaction

International Nuclear Information System (INIS)

Sigrist, J.F.

2006-01-01

The present paper deals with the dynamic analysis of a nuclear reactor subjected to a shock loading with fluid-structure interaction modeling. The general framework of the study is that of linear vibrations, which are investigated for coupled fluid-structure problems. From a methodological point of view, energy deformation and modal mass calculation are exposed for elasto-acoustic systems. From an industrial point of view, the influence of elasto-acoustic coupling effects are highlighted for the studied structure. The dynamic analysis of the coupled system is carried out with various procedures (static, spectral and temporal methods), which are exposed and compared. As a general result, the spectral method is proved to be the most effective for the industrial problem. From the numerical point of view, the discretization procedure is based on a finite element method for the coupled problem, using a displacement and pressure-displacement potential coupled formulation with axi-symmetric representation of the problem unknowns. A finite element code is developed within MATLAB for the specific study, the numerical calculations presented in the paper are used as reference test cases for integration of the (u,p,φ) formulation in the commercial finite element code Ansys. (author)

Semiconductor industry: a survey of structure, conduct, and performance

International Nuclear Information System (INIS)

Webbink, D.W.

1977-01-01

The study describes the structure, conduct, and performance of the semiconductor industry. The industry is characterized by a high rate of innovation and technological change, rapidly falling costs and prices, and rapidly rising sales in boom periods as well as large declines in sales in recession periods. These desirable performance characteristics take place in an industry that has moderately high domestic levels of concentration. However, there are many features that cause this industry to have behavior and performance that is markedly different from such highly concentrated industries as automobiles and steel. These features were investigated and are reported

Essays on industrial structure and economic growth

International Nuclear Information System (INIS)

Nordaas, Hildegunn Kyvik

1997-01-01

The book is a thesis submitted for the degree of dr. polit. at the University of Bergen. It has chapters on economic development and industrial structure, trade and growth with static and dynamic economies of scale, terms of trade and economic growth in a world of constrained capital mobility, how liberalization of trade in services may conserve natural reserves, some reasons why capital does not flow from rich to poor counties and finally on South African manufacturing industries - catching up or falling behind

Analysis of the Potential Impacts on China’s Industrial Structure in Energy Consumption

Directory of Open Access Journals (Sweden)

Yushen Tian

2017-12-01

Full Text Available Industrial structure is one of the main factors that determine energy consumption. Based on China’s energy consumption in 2015 and the goals in 13th Five-Year Plan for Economic and Social Development of the People’s Republic of China (The 13th Five-Year Plan, this paper established an input–output fuzzy multi-objective optimization model to estimate the potential impacts of China’s industrial structure on energy consumption in 2015. Results showed that adjustments to industrial structure could save energy by 19% (1129.17 million ton standard coal equivalent (Mtce. Second, China’s equipment manufacturing industry has a large potential to save energy. Third, the development of several high energy intensive and high carbon intensive sectors needs to be strictly controlled, including Sector 25 (electricity, heat production, and supply industry, Sector 11 (manufacture of paper and stationery, printing, and Sector 14 (non-metallic mineral products industry. Fourth, the territory industry in China has a great potential for energy saving, while its internal structure still needs to be upgraded. Finally, we provide policy suggestions that may be adopted to reduce energy consumption by adjusting China’s industrial structure.

Gas–Liquid Mass Transfer Coefficient in Stirred Tanks Interpreted through Models of Idealized Eddy Structure of Turbulence in the Bubble Vicinity

Czech Academy of Sciences Publication Activity Database

Linek, V.; Kordač, M.; Zedníková, Mária; Moucha, T.

2004-01-01

Roč. 43, č. 12 (2004), s. 1511-1517 ISSN 0255-2701 Institutional research plan: CEZ:AV0Z4072921 Keywords : mass transfer coefficient * bubble * dynamic pressure method Subject RIV: CI - Industrial Chemistry, Chemical Engineering Impact factor: 1.033, year: 2004

Regional Institutional Structure in the Context of Innovative Industry Development

Directory of Open Access Journals (Sweden)

Anastasia Y. Nikitaeva

2017-03-01

Full Text Available The paper proves that successful innovation-oriented development of the industrial complex of the region can be ensured through the creation of adequate institutional structure. As a theoretical and conceptual platform for this task the use of regional institutionalism is suggested. It is reasoned that integration component plays an important role in providing of the innovative development of the industry in modern economic realities and the potential effects of integration on meso- and micro-levels of economy are provided. Integration of industrial structures potential at the same time assumes expansion of a partner segment of the entities relations in the market environment on the basis of network, cluster, and integration approaches convergence to management in the industrial development. On the basis of the international experience analysis it is illustrated that forming of multichannel partnership of actors in the industrial sphere with a vector on an innovatization requires creation of the corresponding institutional conditions. It is established that the main objectives of the relevant institutes consist in legitimization of various forms and technologies of partnership and stimulation of economic entities interactions. The first problem is solved by means of legal support of integration and partners’ interactions, the second one - with the use of a program and project approach. The basic structural elements and functional areas of regional institutional structure in the context of innovative industry development are determined. It is shown that the institutions of the partnership and monitoring of the obligations implementation by integration formations participants can have formal and informal nature, at the same time the trust institution is especially important. In work significant influence of regional specifics on institutional structure and integration of economic entities is proved.

Dynamic analysis on market structure of China's coal industry

International Nuclear Information System (INIS)

Yang, Qing; Zhang, Lei; Wang, Xin

2017-01-01

According to industrial organization theory, market structure is a crucial factor to market performance. Based on the VAR model and the data from 1994 to 2014, we revealed the dynamic response route of the market structure to these factors and the change process of contribution rate of these factors to the market structure. It shows that market structure is inertial adjustment; technology advance and industry policy have continuous effects on improvement of market concentration ratio; market size and production scale have sustained negative effects on market concentration ratio; fixed capital has barrier effect, which is mainly the entry barrier effect at the beginning, and then the exit barrier effect continues to play a leading role. Therefore, the government has no need to introduce special policies to encourage merger or expansion on the capacity as enterprises would do it spontaneously; it is necessary to make market access system stricter, to improve exit compensation mechanism and to promote technological innovation; all these policies need dynamic adjustment based on the stages of economic cycle. - Highlights: • The adjustment mechanism of China's coal market structure is revealed. • Technology and industry policy are significant factors to optimize the market structure. • The government need not introduce special policy to encourage merger. • The market access system should be stricter. • Policies strength should be dynamically adjusted based on the economic cycle.

New structural changes in Kazakhstan petroleum and gas industry management

International Nuclear Information System (INIS)

Nadirov, N.K.; Konaev, Eh.N.

1998-01-01

The basic stags of structural changes in Kazakhstan petroleum and gas industry management are considered. It is shown, that in new economic situation the traditional branch scheme of management became out date and does not meet demands up the times. The spent structural changes in petroleum and gas industry management will promote to strengthening of strategic role of hydrocarbon raw material production and processing in prospect. (author)

Detailed Analysis of Amplitude and Slope Diffraction Coefficients for knife-edge structure in S-UTD-CH Model

Directory of Open Access Journals (Sweden)

Eray Arik

2017-03-01

Full Text Available In urban, rural and indoor applications, diffraction mechanism is very important to predict the field strength and calculate the coverage accurately. The diffraction mechanism takes place on NLOS (non-line-of-sight cases like rooftop, vertex, corner, edge and sharp surfaces. S-UTD-CH model computes three type of electromagnetic wave incidence such as direct, reflected and diffracted waves, respectively. As obstacles in diffraction geometry are in the same or closer height, contribution of the diffraction mechanism is dominant. To predict the diffracted fields accurately, amplitude and slope diffraction coefficients and the derivative of these coefficients have to be taken correctly. In this paper, all the derivations about diffraction coefficients are made for knife edge type structures and extensive simulations are performed in order to analyze the amplitude and diffraction coefficients. In plane angle diffraction, contributions of amplitude and slope diffraction coefficient are maxima.

Discharge Coefficient of Rectangular Short-Crested Weir with Varying Slope Coefficients

Directory of Open Access Journals (Sweden)

Yuejun Chen

2018-02-01

Full Text Available Rectangular short-crested weirs are widely used for simple structure and high discharge capacity. As one of the most important and influential factors of discharge capacity, side slope can improve the hydraulic characteristics of weirs at special conditions. In order to systemically study the effects of upstream and downstream slope coefficients S1 and S2 on overflow discharge coefficient in a rectangular short-crested weir the Volume of Fluid (VOF method and the Renormalization Group (RNG κ-ε turbulence model are used. In this study, the slope coefficient ranges from V to 3H:1V and each model corresponds to five total energy heads of H0 ranging from 8.0 to 24.0 cm. Comparisons of discharge coefficients and free surface profiles between simulated and laboratory results display a good agreement. The simulated results show that the difference of discharge coefficients will decrease with upstream slopes and increase with downstream slopes as H0 increases. For a given H0, the discharge coefficient has a convex parabolic relation with S1 and a piecewise linearity relation with S2. The maximum discharge coefficient is always obtained at S2 = 0.8. There exists a difference between upstream and downstream slope coefficients in the influence range of free surface curvatures. Furthermore, a proposed discharge coefficient equation by nonlinear regression is a function of upstream and downstream slope coefficients.

Chemical analysis of industrial scale deposits by combined use of correlation coefficients with emission line detection of laser induced breakdown spectroscopy spectra

International Nuclear Information System (INIS)

Siozos, P.; Philippidis, A.; Hadjistefanou, M.; Gounarakis, C.; Anglos, D.

2013-01-01

Laser-induced breakdown spectroscopy (LIBS) was used to determine the mineral composition of various industrial scale samples. The aim of the study has been to investigate the capacity of LIBS to provide a fast, reliable analytical tool for carrying out routine analysis of inorganic scales, potentially on site, as a means to facilitate decision making concerning scale removal procedures. LIBS spectra collected in the range of 200–660 nm conveyed information about the metal content of the minerals. Via a straightforward analysis based on linear correlation of LIBS spectra it was possible to successfully discriminate scale samples into three main groups, Fe-rich, Ca-rich and Ba-rich, on the basis of correlation coefficients. By combining correlation coefficients with spectral data collected in the NIR, 860–960 nm, where sulfur emissions are detected, it became further possible to discriminate sulfates from carbonates as confirmed by independent analysis based on Raman spectroscopy. It is emphasized that the proposed LIBS-based method successfully identifies the major mineral or minerals present in the samples classifying the scales into relevant groups hence enabling process engineers to select appropriate scale dissolution strategies. - Highlights: • LIBS was used to determine the mineral composition of industrial scale samples. • Three groups of inorganic scales were identified: Ca rich, Ba rich and Fe rich. • A method that combines correlation coefficients and line detection is proposed. • The method successfully identifies the main mineral, or minerals, in the samples. • The results were compared with results obtained by use of Raman analysis

Probability based calibration of pressure coefficients

DEFF Research Database (Denmark)

Hansen, Svend Ole; Pedersen, Marie Louise; Sørensen, John Dalsgaard

2015-01-01

Normally, a consistent basis for calculating partial factors focuses on a homogeneous reliability index neither depending on which material the structure is constructed of nor the ratio between the permanent and variable actions acting on the structure. Furthermore, the reliability index should n...... the characteristic shape coefficients are based on mean values as specified in background documents to the Eurocodes. Importance of hidden safeties judging the reliability is discussed for wind actions on low-rise structures....... not depend on the type of variable action. A probability based calibration of pressure coefficients have been carried out using pressure measurements on the standard CAARC building modelled on scale of 1:383. The extreme pressures measured on the CAARC building model in the wind tunnel have been fitted.......3, the Eurocode partial factor of 1.5 for variable actions agrees well with the inherent uncertainties of wind actions when the pressure coefficients are determined using wind tunnel test results. The increased bias and uncertainty when pressure coefficients mainly are based on structural codes lead to a larger...

Using LMDI method to analyze the change of China's industrial CO2 emissions from final fuel use: An empirical analysis

International Nuclear Information System (INIS)

Liu Lancui; Fan Ying; Wu Gang; Wei Yiming

2007-01-01

Based on time series decomposition of the Log-Mean Divisia Index (LMDI), this paper analyzes the change of industrial carbon emissions from 36 industrial sectors in China over the period 1998-2005. The changes of industrial CO 2 emission are decomposed into carbon emissions coefficients of heat and electricity, energy intensity, industrial structural shift, industrial activity and final fuel shift. Our results clearly show that raw chemical materials and chemical products, nonmetal mineral products and smelting and pressing of ferrous metals account for 59.31% of total increased industrial CO 2 emissions. The overwhelming contributors to the change of China's industrial sectors' carbon emissions in the period 1998-2005 were the industrial activity and energy intensity; the impact of emission coefficients of heat and electricity, fuel shift and structural shift was relatively small. Over the year 1998-2002, the energy intensity change in some energy-intensive sectors decreased industrial emissions, but increased emissions over the period 2002-2005. The impact of structural shift on emissions have varied considerably over the years without showing any clear trend, and the final fuel shift increased industrial emissions because of the increase of electricity share and higher emissions coefficient. Therefore, raw chemical materials and chemical products, nonmetal mineral products and smelting and pressing of ferrous metals should be among the top priorities for enhancing energy efficiency and driving their energy intensity close to the international advanced level. To some degree, we should reduce the products waste of these sectors, mitigate the growth of demand for their products through avoiding the excessive investment highly related to these sectors, increasing imports or decreasing the export in order to avoid expanding their share in total industrial value added. However, all these should integrate economic growth to harmonize industrial development and CO 2

A special covariance structure for random coefficient models with both between and within covariates

International Nuclear Information System (INIS)

Riedel, K.S.

1990-07-01

We review random coefficient (RC) models in linear regression and propose a bias correction to the maximum likelihood (ML) estimator. Asymmptotic expansion of the ML equations are given when the between individual variance is much larger or smaller than the variance from within individual fluctuations. The standard model assumes all but one covariate varies within each individual, (we denote the within covariates by vector χ 1 ). We consider random coefficient models where some of the covariates do not vary in any single individual (we denote the between covariates by vector χ 0 ). The regression coefficients, vector β k , can only be estimated in the subspace X k of X. Thus the number of individuals necessary to estimate vector β and the covariance matrix Δ of vector β increases significantly in the presence of more than one between covariate. When the number of individuals is sufficient to estimate vector β but not the entire matrix Δ , additional assumptions must be imposed on the structure of Δ. A simple reduced model is that the between component of vector β is fixed and only the within component varies randomly. This model fails because it is not invariant under linear coordinate transformations and it can significantly overestimate the variance of new observations. We propose a covariance structure for Δ without these difficulties by first projecting the within covariates onto the space perpendicular to be between covariates. (orig.)

The Forecast of Baoding’s Industrial Structure in Different Scenarios

Science.gov (United States)

Li, Wei; Zhang, Hongzhi; Zhang, Shu

2018-01-01

In November 12th, 2014, Chinese government officially announced reaching the peak of CO2 emissions around 2030. Baoding, as one of the first low-carbon pilot cities in China, bore an important mission and set an example to other cities to reach the peak of carbon emissions before 2030. This paper employed a computable general equilibrium model to simulate the industrial structure and social welfare of Baoding in different scenarios. And the calculation results have shown that on the principle of the optimal industrial structure and the minimum social welfare loss and a consideration of industrial economic development, the best time of CO2 emissions peak for Baoding was 2025 when its total emissions would reach 2.84 million tons. Finally, some suggestions were given to guide this city to reduce carbon emissions in industrial development.

Changes in CO2 emission intensities in the Mexican industry

International Nuclear Information System (INIS)

González, Domingo; Martínez, Manuel

2012-01-01

A CO 2 emission intensity analysis in the Mexican industry from 1965 to 2010 is carried out by taking into consideration four stages: 1965–1982, 1982–1994, 1994–2003, and 2004–2010. Based on the LMDI decomposition methodology, three influencing factors are analyzed: energy intensity, CO 2 coefficient, and structure in terms of their contributions of each individual attributes to the overall percent change of them as it was proposed in Choi and Ang (2011). The energy intensity effect was the driving factor behind the main decreases of CO 2 intensity, the CO 2 coefficient effect contributed to less extent to mitigate it, and the structure effect tended to increased it. It is observed that CO 2 intensity declined by 26.2% from 1965 to 2003, but it increased by 10.1% from 2004 to 2010. In addition, the move of Mexico from an economic model based on import-substitution to an export-oriented economy brought more importance to the Mexican industry intended to export, thus maintaining high levels of activity of industries such as cement, iron and steel, chemical, and petrochemical, while industries such as automotive, and ‘other’ industries grown significantly not only as far their energy consumptions and related CO 2 emissions but they also increased their contributions to the national economy. - Highlights: ► Industrial CO 2 emission intensity was reduced by 26.2% from 1965 to 2003. ► Industrial CO 2 emission intensity was increased by 10.1% from 2003 to 2010. ► 1965–2003: Intensity effect took down CO 2 emission intensity. ► 2003–2010: Export-oriented industries raised CO 2 emission intensity.

On Industrial Application of Structural Reliability Theory

DEFF Research Database (Denmark)

Thoft-Christensen, Palle

For the last two decades we have seen an increasing interest in applying structural reliability theory to many different industries. However, the number of real applications is much smaller than what one would expect. At the beginning most applications were in the design/analyses area especially...

Gaussian Mixture Random Coefficient model based framework for SHM in structures with time-dependent dynamics under uncertainty

Science.gov (United States)

Avendaño-Valencia, Luis David; Fassois, Spilios D.

2017-12-01

The problem of vibration-based damage diagnosis in structures characterized by time-dependent dynamics under significant environmental and/or operational uncertainty is considered. A stochastic framework consisting of a Gaussian Mixture Random Coefficient model of the uncertain time-dependent dynamics under each structural health state, proper estimation methods, and Bayesian or minimum distance type decision making, is postulated. The Random Coefficient (RC) time-dependent stochastic model with coefficients following a multivariate Gaussian Mixture Model (GMM) allows for significant flexibility in uncertainty representation. Certain of the model parameters are estimated via a simple procedure which is founded on the related Multiple Model (MM) concept, while the GMM weights are explicitly estimated for optimizing damage diagnostic performance. The postulated framework is demonstrated via damage detection in a simple simulated model of a quarter-car active suspension with time-dependent dynamics and considerable uncertainty on the payload. Comparisons with a simpler Gaussian RC model based method are also presented, with the postulated framework shown to be capable of offering considerable improvement in diagnostic performance.

Evaluation of total and partial structure factors, self-diffusion coefficients, and compressibilities of the cadmium-gallium melt

International Nuclear Information System (INIS)

Gopala Rao, R.V.; Das, R.

1988-01-01

The three partial structure factors S/sub 11/(K), S/sub 22/(K), and S/sub 12/(K) defined by Ashcroft and Langreth are computed with a square-well potential as a perturbation over a hard-sphere potential for different atomic fractions or concentrations of cadmium for Cd-Ga melt at 296 0 C. Also, the number-number, concentration-concentration, and the cross-term number-concentration structure factors due to Bhatia-Thornton have been calculated for the seven concentrations of Cd-Ga melt at that temperature. From these partial structure factors total structure factors are computed and are compared with the experimental results. The total structure factors so computed are found to be in excellent agreement with the measured values except in the long-wavelength limit of S(0). Using the partial structure factors in the long-wavelength limit the isothermal compressibilities have been calculated. From these partial structure factors and by using the linear-trajectory approximation of Helfand, the self-diffusion coefficients D/sub i/'s have also been calculated for various atomic fractions of Cd for Cd-Ga alloy at 296 0 C. From these D/sub i/'s, an estimate of the mutual diffusion coefficients has been made to a good approximation

Market structure in the US electricity industry: a long-term perspective

International Nuclear Information System (INIS)

Kamerschen, D.R.

2005-01-01

We estimate changes in market structure in the US electric power industry during the last three decades using two independent approaches. First, we estimate an industry-wide conjectural-variations parameter. We find that industry concentration was generally rising during the 1970s but has been gradually and consistently falling since the early 1980s. To check the robustness of these results, we then use a translog production function to estimate the Lerner Index. The results confirm that the industry was becoming less concentrated during the 1980s, though the Lerner Index tended to fluctuate during the late 1980s and early 1990s. Our results suggest that the current state of the electricity industry may have more to do with long-term changes in market structure than recent attempts to establish competitive wholesale electricity markets. (author)

Cluster structure in the correlation coefficient matrix can be characterized by abnormal eigenvalues

Science.gov (United States)

Nie, Chun-Xiao

2018-02-01

In a large number of previous studies, the researchers found that some of the eigenvalues of the financial correlation matrix were greater than the predicted values of the random matrix theory (RMT). Here, we call these eigenvalues as abnormal eigenvalues. In order to reveal the hidden meaning of these abnormal eigenvalues, we study the toy model with cluster structure and find that these eigenvalues are related to the cluster structure of the correlation coefficient matrix. In this paper, model-based experiments show that in most cases, the number of abnormal eigenvalues of the correlation matrix is equal to the number of clusters. In addition, empirical studies show that the sum of the abnormal eigenvalues is related to the clarity of the cluster structure and is negatively correlated with the correlation dimension.

Tendency of Embodied Carbon Change in the Export Trade of Chinese Manufacturing Industry from 2000 to 2015 and Its Driving Factors

Directory of Open Access Journals (Sweden)

Ji Guo

2018-06-01

Full Text Available The manufacturing industry is an important part of the national industrial system, and is usually an industry with high carbon content. However, few studies have been carried out on the total amount, structure and the trend of the embodied carbon emission in the international trade of the Chinese manufacturing industry. Based on the input–output method, the thesis proposes the coefficient of direct carbon emission and complete carbon emission and a method for calculating the embodied carbon of the export trade. It also calculates the coefficient of direct carbon emission and complete carbon emission for the Chinese manufacturing sector from 2000 to 2015 and breaks down the embodied carbon change of export trade in the manufacturing industry to a technological effect, structural effect and scale effect by using the method of structural decomposition. Several inspiring conclusions could be drawn from the thesis. For example: (1 the coefficient of both the direct carbon emission and the complete carbon emission has been decreasing significantly, indicating the achievements of the energy saving and emission reduction of the Chinese manufacturing industry. (2 The embodied carbon emission from the manufacturing exports remains high and presents a rising tendency. The main sectors that export the embodied carbon includes “S10 mechanical equipment and instruments”, “S9 metal products”, “S6 chemical industry”, etc., which should be the key sectors on reducing embodied carbon in exports. (3 The driving force of the embodied carbon exports lies in the scale effect of the manufacturing industry, on which the technical effect of the industry has a significant negative effect. The structural effect should have a positive influence that takes on a rising tendency; generally, this effect is only two-thirds of the scale effect. Finally, the corresponding policy suggestions have been made.

Effect of anomalous transport coefficients on the thermal structure of the storm time auroral ionosphere

International Nuclear Information System (INIS)

Fontheim, E.G.; Ong, R.S.B.; Roble, R.G.; Mayr, H.G.; Hoegy, W.H.; Baron, M.J.; Wickwar, V.B.

1978-01-01

By analyzing an observed storm time auroral electron temperature profile it is shown that anomalous transport effects strongly influence the thermal structure of the disturbed auroral ionosphere. Such anomalous transport effects are a consequence of plasma turbulence, the existence of which has been established by a large number of observations in the auroral ionosphere. The electron and composite ion energy equations are solved with anomalous electron thermal conductivity and parallel electrical resistivity coefficients. The solutions are parameterized with respect to a phenomenological altitude-dependent anomaly coefficient A and are compared with an observed storm time electron temperature profile above Chatanika. The calculated temperature profile for the classical case (A=1)disagrees considerably with the measured profile over most of the altitude range up to 450km. It is shown that an anomaly coefficient with a sharp peak of the order of 10 4 centered aroung the F 2 peak is consistent with observations

Defining the Ecological Coefficient of Performance for an Aircraft Propulsion System

Science.gov (United States)

Şöhret, Yasin

2018-05-01

The aircraft industry, along with other industries, is considered responsible these days regarding environmental issues. Therefore, the performance evaluation of aircraft propulsion systems should be conducted with respect to environmental and ecological considerations. The current paper aims to present the ecological coefficient of performance calculation methodology for aircraft propulsion systems. The ecological coefficient performance is a widely-preferred performance indicator of numerous energy conversion systems. On the basis of thermodynamic laws, the methodology used to determine the ecological coefficient of performance for an aircraft propulsion system is parametrically explained and illustrated in this paper for the first time. For a better understanding, to begin with, the exergy analysis of a turbojet engine is described in detail. Following this, the outputs of the analysis are employed to define the ecological coefficient of performance for a turbojet engine. At the end of the study, the ecological coefficient of performance is evaluated parametrically and discussed depending on selected engine design parameters and performance measures. The author asserts the ecological coefficient of performance to be a beneficial indicator for researchers interested in aircraft propulsion system design and related topics.

The uranium producing industry - its capital structure

International Nuclear Information System (INIS)

Duncan, I.J.

1989-01-01

The uranium mining industry has undergone a substantial change over the past decade. A few rather informal statistics relevant to this change have been gathered together, with particular emphasis on the corporate and capital structures which existed in the industry in the 1970s and 1980s. These data offer interesting insights on the availability of capital for new uranium mining ventures, and lead to a sketch of the finances of a hypothetical new venture. The results of this work suggest that there may be few producers likely to start work on a greenfield site in the next few years, even if the market recovers from its present doldrums. (author)

High performance structural ceramics for nuclear industry

International Nuclear Information System (INIS)

Pujari, Vimal K.; Faker, Paul

2006-01-01

A family of Saint-Gobain structural ceramic materials and products produced by its High performance Refractory Division is described. Over the last fifty years or so, Saint-Gobain has been a leader in developing non oxide ceramic based novel materials, processes and products for application in Nuclear, Chemical, Automotive, Defense and Mining industries

Axially symmetric reconstruction of plasma emission and absorption coefficients

International Nuclear Information System (INIS)

Yang Lixin; Jia Hui; Yang Jiankun; Li Xiujian; Chen Shaorong; Liu Xishun

2013-01-01

A layered structure imaging model is developed in order to reconstruct emission coefficients and absorption coefficients simultaneously, in laser fusion core plasma diagnostics. A novel axially symmetric reconstruction method that utilizes the LM (Levenberg-Marquardt) nonlinear least squares minimization algorithm is proposed based on the layered structure. Numerical simulation results demonstrate that the proposed method is sufficiently accurate to reconstruct emission coefficients and absorption coefficients, and when the standard deviation of noise is 0.01, the errors of emission coefficients and absorption coefficients are 0.17, 0.22, respectively. Furthermore, this method could perform much better on reconstruction effect compared with traditional inverse Abel transform algorithms. (authors)

Electric utility strategies and the emerging industry structure - Part 1

International Nuclear Information System (INIS)

Motupalli, S.

1991-01-01

The electric utility industry is our most capital intensive industry by far. Over the past few decades, socioeconomic and technological forces have been quietly revolutionizing the way the industry conducts itself. During the 1980s, these changes have been particularly intense, often catching both regulators and regulated ill-prepared to develop effective and profitable strategies to deal with such change. Much has already been written about these changes: independent power producers, competitive procurement of resources, incentive-based regulation, the benefits of affiliated company structures, mergers and consolidation, customer energy conservation, and marketing strategy development are all currently highly popular article and seminar topics. The author's object in this two-part series is to facilitate development of a decision framework to put these various changes in perspective, to help develop effective strategies through better focused and equipped planning methodologies. Gaining an understanding of the role, strengths and weaknesses of the various players in an industry and the structural constraints in which they operate is a necessary precursor to developing effective operating strategies to deal with change or to manipulate industry forces in your favor. Michael Port's popular five forces model provides a convenient way to develop such an understanding. It provides a way to map the industry forces driving profitability, through a review of the strengths, weaknesses and leverage of: current industry players, suppliers to the industry, customers for the industry's product, new entrants into the market, and substitute products providing equal or better value. Part 1 of this series reviews each of these five forces along some key dimensions to determine their direction of change or influence, and whether this change impacts a utility's competitive position favorably or unfavorably

Determinants of Market Structure and the Airline Industry

Science.gov (United States)

Raduchel, W.

1972-01-01

The general economic determinants of market structure are outlined with special reference to the airline industry. Included are the following facets: absolute size of firms; distributions of firms by size; concentration; entry barriers; product and service differentiation; diversification; degrees of competition; vertical integration; market boundaries; and economies of scale. Also examined are the static and dynamic properties of market structure in terms of mergers, government policies, and economic growth conditions.

Dynamic Structure Factor and Transport Coefficients of a Homogeneously Driven Granular Fluid in Steady State

Science.gov (United States)

Vollmayr-Lee, Katharina; Zippelius, Annette; Aspelmeier, Timo

2011-03-01

We study the dynamic structure factor of a granular fluid of hard spheres, driven into a stationary nonequilibrium state by balancing the energy loss due to inelastic collisions with the energy input due to driving. The driving is chosen to conserve momentum, so that fluctuating hydrodynamics predicts the existence of sound modes. We present results of computer simulations which are based on an event driven algorithm. The dynamic structure factor F (q , ω) is determined for volume fractions 0.05, 0.1 and 0.2 and coefficients of normal restitution 0.8 and 0.9. We observe sound waves, and compare our results for F (q , ω) with the predictions of generalized fluctuating hydrodynamics which takes into account that temperature fluctuations decay either diffusively or with a finite relaxation rate, depending on wave number and inelasticity. We determine the speed of sound and the transport coefficients and compare them to the results of kinetic theory. K.V.L. thanks the Institute of Theoretical Physics, University of Goettingen, for financial support and hospitality.

The Pharmaceutical Industry Beamline of Pharmaceutical Consortium for Protein Structure Analysis

International Nuclear Information System (INIS)

Nishijima, Kazumi; Katsuya, Yoshio

2002-01-01

The Pharmaceutical Industry Beamline was constructed by the Pharmaceutical Consortium for Protein Structure Analysis which was established in April 2001. The consortium is composed of 22 pharmaceutical companies affiliating with the Japan Pharmaceutical Manufacturers Association. The beamline is the first exclusive on that is owned by pharmaceutical enterprises at SPring-8. The specification and equipments of the Pharmaceutical Industry Beamline is almost same as that of RIKEN Structural Genomics Beamline I and II. (author)

A Micro-Test Structure for the Thermal Expansion Coefficient of Metal Materials

Directory of Open Access Journals (Sweden)

Qingying Ren

2017-02-01

Full Text Available An innovative micro-test structure for detecting the thermal expansion coefficient (TEC of metal materials is presented in this work. Throughout this method, a whole temperature sensing moveable structures are supported by four groups of cascaded chevrons beams and packed together. Thermal expansion of the metal material causes the deflection of the cascaded chevrons, which leads to the capacitance variation. By detecting the capacitance value at different temperatures, the TEC value of the metal materials can be calculated. A finite element model has been established to verify the relationship between the TEC of the material and the displacement of the structure on horizontal and vertical directions, thus a function of temperature for different values of TEC can be deduced. In order to verify the analytical model, a suspended-capacitive micro-test structure has been fabricated by MetalMUMPs process and tested in a climate chamber. Test results show that in the temperature range from 30 °C to 80 °C, the TEC of the test material is 13.4 × 10−6 °C−1 with a maximum relative error of 0.8% compared with the given curve of relationship between displacement and temperature.

Diffusion and transport coefficients in synthetic opals

International Nuclear Information System (INIS)

Sofo, J. O.; Mahan, G. D.

2000-01-01

Opals are structures composed of close-packed spheres in the size range of nano to micrometers. They are sintered to create small necks at the points of contact. We have solved the diffusion problem in such structures. The relation between the diffusion coefficient and the thermal and electrical conductivity is used to estimate the transport coefficients of opal structures as a function of the neck size and the mean free path of the carriers. The theory presented is also applicable to the diffusion problem in other periodic structures. (c) 2000 The American Physical Society

New Soliton-like Solutions and Multi-soliton Structures for Broer-Kaup System with Variable Coefficients

International Nuclear Information System (INIS)

Ji Mingjun; Lue Zhuosheng

2005-01-01

By using the further extended tanh method [Phys. Lett. A 307 (2003) 269; Chaos, Solitons and Fractals 17 (2003) 669] to the Broer-Kaup system with variable coefficients, abundant new soliton-like solutions and multi-soliton-like solutions are derived. Based on the derived multi-soliton-like solutions which contain arbitrary functions, some interesting multi-soliton structures are revealed.

Recent Trends in the Structure of the Cable Television Industry.

Science.gov (United States)

Perry, Martin

After a brief review of the growth of cable television from 1948 to 1965, the paper examines in more detail trends in the structure of the industry since 1965. Specifically, interest revolves around the apparent trends of concentration and vertical integration within the industry. Corporate histories of the leading firms are then used to…

Market structure, industrial organisation and technological development: the case of the Japanese electronics-based nc-machine tool industry.

OpenAIRE

Watanabe, S

1983-01-01

ILO pub-WEP pub. Working paper on the impact of market structure and business organization on technological change in the automatic control machine tool industry in Japan - based on a 1982 sample survey of 40 industrial enterprises, discusses research and development trends, demand, production, subcontracting, competition, etc.; investigates the impact of electronics Innovation on small scale industry, the international division of labour and on developing countries. Bibliography and graphs.

OOA composite structures applicable in railway industry

Directory of Open Access Journals (Sweden)

Rusnáková Soňa

2017-01-01

Full Text Available Composite sandwich structures offers several advantages over conventional structural materials such as lightweight, high bending and torsional stiffness, superior thermal insulation and excellent acoustic damping. In the aerospace industry, sandwich composites are commonly manufactured using the autoclave process which is associated with high operating cost. Out-of-autoclave (OOA manufacturing has been shown to be capable of producing low cost and high performance composites. In this paper we present results of experimental testing of various sandwich materials according various standards and actual requirements in transport industry. We compared the different types of surface and paint systems, because these layers are the most important in contact with the surrounding environment and load conditions. In the experimental measurements were used various materials. For the core of the sandwich structure were selected aluminium honeycomb, aramid honeycomb and PET (Polyethylene terephthalate foam core. Support layers were chosen two kinds of predimpregnated materials. The conditions of measurements were requirements for strength and rigidity, safety - flame resistance and reflectivity resistance. The samples were tested at the 3 - point bending test according to standard EN ISO 178, by modified test to determine the force required to rapture threaded insert, by test of reflectivity according to UIC CODE 844-4 R and according to standard EN 45545-2 fire protection of railway vehicles.

Clustering stocks using partial correlation coefficients

Science.gov (United States)

Jung, Sean S.; Chang, Woojin

2016-11-01

A partial correlation analysis is performed on the Korean stock market (KOSPI). The difference between Pearson correlation and the partial correlation is analyzed and it is found that when conditioned on the market return, Pearson correlation coefficients are generally greater than those of the partial correlation, which implies that the market return tends to drive up the correlation between stock returns. A clustering analysis is then performed to study the market structure given by the partial correlation analysis and the members of the clusters are compared with the Global Industry Classification Standard (GICS). The initial hypothesis is that the firms in the same GICS sector are clustered together since they are in a similar business and environment. However, the result is inconsistent with the hypothesis and most clusters are a mix of multiple sectors suggesting that the traditional approach of using sectors to determine the proximity between stocks may not be sufficient enough to diversify a portfolio.

Development of Falling Film Heat Transfer Coefficient for Industrial Chemical Processes Evaporator Design

KAUST Repository

Shahzad, Muhammad Wakil

2018-03-07

In falling film evaporators, the overall heat transfer coefficient is controlled by film thickness, velocity, liquid properties and the temperature differential across the film layer. This chapter presents the heat transfer behaviour for evaporative film boiling on horizontal tubes, but working at low pressures of 0.93–3.60 kPa as well as seawater salinity of 15,000–90,000 mg/l or ppm. Owing to a dearth of literature on film-boiling at these conditions, the chapter is motivated by the importance of evaporative film-boiling in the process industries. It is observed that in addition to the above-mentioned parameters, evaporative heat transfer of seawater is affected by the emergence of micro-bubbles within the thin film layer, particularly when the liquid saturation temperatures drop below 25°C (3.1 kPa). Such micro-bubbles are generated near to the tube wall surfaces, and they enhanced the heat transfer by two or more folds when compared with the predictions of conventional evaporative film-boiling. The appearance of micro-bubbles is attributed to the rapid increase in the specific volume of vapour, i.e. dv/dT, at low saturation temperature conditions. A new correlation is thus proposed in this chapter and it shows good agreement to the measured data with an experimental uncertainty less than ±8%.

Changes in the North American ferroalloys industry structure and trends in the industry during the past 20 years

Science.gov (United States)

Didaleusky, J.R.; Jorgenson, J.D.; Corathers, L.A.; Fenton, M.D.; Kuck, P.H.; Papp, J.F.; Polyak, D.E.; Shedd, Kim B.

2010-01-01

This analysis of changes in the North American (Canada, Mexico, and the United States) ferroalloys industry between 1987 and 2007 includes the locations and types of ferroalloy plants in North America and the changes in production, imports, exports, pricing, and the structure of ownership since 1987, which was just prior to the implementation of the North American Free Trade Agreement. Significant events affect the supply of and demand for North American ferroalloys -- changes in end uses, global industry structure, political stability, and technology. Mergers and acquisitions in the ferroalloys industries of North America and their impact on trade are other significant issues in international trade as are antidumping and countervailing duty orders, and trade agreements and policies related to ferroalloys occurring during this period and affecting the North American region. Raw materials and energy supply to the ferroalloy industry, the logistics involved in the trade of North American ferroalloys, and the use of ferroalloys within major downstream industries are also important factors. Emphasis is placed on the bulk ferroalloys—ferrochromium, ferromanganese, ferrosilicon, and silicomanganese. Other ferroalloys investigated include those of boron, molybdenum, nickel, niobium, titanium, tungsten, and vanadium.

Market structure, price rigidity, and performance in the Indonesian food and beverages industry

NARCIS (Netherlands)

Setiawan, M.

2012-01-01

Keywords: industrial concentration, price rigidity, technical efficiency, price-cost margin, Structure-Conduct-Performance (SCP), new empirical industrial organization (NEIO), Indonesian food and beverages industry, Data Envelopment Analysis (DEA), system of equations

Experimental research on rear collimator in γ-ray industrial CT

International Nuclear Information System (INIS)

Wu Zhifang; Liu Jinhui

2009-01-01

Rear collimator is one of the key components in the γ-ray industrial CT, which plays an important role in removing scattering influence and improving the CT spatial resolution. High-performance CT is always associated with a high-quality collimator. By means of experiments, this paper discusses the behavior of collimators with different shapes and structures from the aspects of detector output signal, mass attenuation coefficient of the inspected object and quality of the actual CT image. The qualitative and quantitative results are reached, which are helpful for the design of high-performance industrial CT.

Study on Web-Based Tool for Regional Agriculture Industry Structure Optimization Using Ajax

Science.gov (United States)

Huang, Xiaodong; Zhu, Yeping

According to the research status of regional agriculture industry structure adjustment information system and the current development of information technology, this paper takes web-based regional agriculture industry structure optimization tool as research target. This paper introduces Ajax technology and related application frameworks to build an auxiliary toolkit of decision support system for agricultural policy maker and economy researcher. The toolkit includes a “one page” style component of regional agriculture industry structure optimization which provides agile arguments setting method that enables applying sensitivity analysis and usage of data and comparative advantage analysis result, and a component that can solve the linear programming model and its dual problem by simplex method.

Amide temperature coefficients in the protein G B1 domain

International Nuclear Information System (INIS)

Tomlinson, Jennifer H.; Williamson, Mike P.

2012-01-01

Temperature coefficients have been measured for backbone amide 1 H and 15 N nuclei in the B1 domain of protein G (GB1), using temperatures in the range 283–313 K, and pH values from 2.0 to 9.0. Many nuclei display pH-dependent coefficients, which were fitted to one or two pK a values. 1 H coefficients showed the expected behaviour, in that hydrogen-bonded amides have less negative values, but for those amides involved in strong hydrogen bonds in regular secondary structure there is a negative correlation between strength of hydrogen bond and size of temperature coefficient. The best correlation to temperature coefficient is with secondary shift, indicative of a very approximately uniform thermal expansion. The largest pH-dependent changes in coefficient are for amides in loops adjacent to sidechain hydrogen bonds rather than the amides involved directly in hydrogen bonds, indicating that the biggest determinant of the temperature coefficient is temperature-dependent loss of structure, not hydrogen bonding. Amide 15 N coefficients have no clear relationship with structure.

A Structured Light Scanner for Hyper Flexible Industrial Automation

DEFF Research Database (Denmark)

Hansen, Kent; Pedersen, Jeppe; Sølund, Thomas

2014-01-01

A current trend in industrial automation implies a need for doing automatic scene understanding, from optical 3D sensors, which in turn imposes a need for a lightweight and reliable 3D optical sensor to be mounted on a collaborative robot e.g., Universal Robot UR5 or Kuka LWR. Here, we empirically...... contribute to the robustness of the system. Hereby, we demonstrate that structured light scanning is a technology well suited for hyper flexible industrial automation, by proposing an appropriate system....

A Review of International Telecommunications Industry Issues, Structure, and Regulatory Problems.

Science.gov (United States)

Cole, Jack E.; And Others

Industry structure studies prior to 1968 are briefly reviewed, and an overview of industrial and technological developments up to the present is provided through synopses of more recent studies. Areas covered include overseas telephone and record carriers; the creation of the Communications Satellite Corporation; the current regulatory and…

Structural fabrication quality as a factor of industrial facilities safety

Science.gov (United States)

Tishkov, E. V.; Kardaev, E. M.; Stolbova, S. Yu; Shishova, O. S.

2018-04-01

In the conditions of industrial facilities high wear degree, it is very important to ensure the possibility of their safe operation in order to avoid various kinds of accidents and catastrophes. As practice shows, industrial plant collapses can occur suddenly under normal operating conditions. Usually, such accidents can take place at different stages of structures life cycle. One of the reasons for this is the initially low quality of reinforced concrete structures fabrication. The article considers the factors contributing to the collapse of reinforced concrete structures of water purification tanks located on the territory of the Omsk Region. The main surveys results on tank structures after collapse with the use of ultrasonic and physical methods of investigation are presented. On the basis of the obtained data analysis, it was found that the main cause of the accidents was the insufficient load-bearing capacity of typical reinforced concrete structures, caused by defects in their fabrication in the factory conditions because of exceeding the standard displacement from the design position of the working reinforcement. Recommendations are given on the identification of defective structures and the prevention of similar accidents when operating similar tanks at manufacturing plants constructed from standard designs.

Structural financing and management of investment projects in the Nigerian mineral industry

International Nuclear Information System (INIS)

Akingbola, E. B. O.

1997-01-01

The mineral industry is attractive because of the diversity and abundance of the deposits. The economic and financial implications of exploiting these are considered. The issues discussed include capital requirement, international outlook, investment opportunities in the mineral industry, oil and gas, solid minerals, attracting investment into the mineral industry,structural financing, macro economic stability. The paper concludes that the ability of the industry to continue attracting foreign capital is crucial to its survival, growth and development

Studying the extinction coefficient due to aerosol particles at different spectral bands in some regions at great Cairo

International Nuclear Information System (INIS)

Shaltout, M.A. Mosalam; Tadros, M.T.Y.; El-Metwally, M.

2000-01-01

Extinction coefficient due to aerosol has been estimated by Pyrheliometric and Gorgie type Actinometric measurements in the industrial, urban areas and compared with agricultural areas. The measurements distributed over one year from June 1992 to May 1993 were made under clear sky for five spectral bands. The results show two maxima in hot wet and spring months and minimum in winter months, but there is a fluctuation in urban area. Diurnal variations show maximum at noon especially in the industrial area. Level of extinction coefficient in the industrial and urban area is greater that that of the agricultural area, except for hot wet months is due to the increase of water vapor content in agricultural area. Spectral distribution of the extinction coefficient decreases monotonically with wavelength. Size of particles in industrial area is greater than in urban and agricultural areas. The temperature and water vapor content have important rules in increasing the extinction coefficient of aerosols. (Author)

Trade pattern change impact on industrial CO2 emissions in Taiwan

International Nuclear Information System (INIS)

Wu, Jung-Hua; Huang, Yun-Hsun; Chen, Yen-Yin

2007-01-01

Input-output structural decomposition analysis (I-O SDA) is applied in this paper to analyze the sources of change in industrial CO 2 emissions in Taiwan from 1989 to 2001. Owing to the fact that Taiwan is an export-oriented, trade-dependent economy, the focus is on trade transformation over the past decade and its effect over industrial CO 2 emissions. Change in trade patterns has significantly impacted many aspects of the Taiwan economy, subsequently resulting in various influences on industrial CO 2 emissions, as shown by empirical analysis results. Change in export level increased industrial CO 2 emissions, above all other effects, by 72.1%. However, changes in export mix and import coefficients imposed effects of dragging down industrial CO 2 emissions by 5.7% and 11.7%, respectively. (author)

Monopolistic structures and industrial analysis in Spain: the case of the pharmaceutical industry.

Science.gov (United States)

Lobo, F

1979-01-01

This article seeks to illustrate the monopolistic structure of the Spanish pharmaceutical industry, focusing on its many dimensions. The basic conditions of technology and demand, product differentiation, effect of advertising, and barriers to entry are considered, as is financial and economic concentration. Although economic conditions are emphasized, the ways they affect public and private health, the quality of health services, and health education are also highlighted.

Class I structures license renewal industry report; revision 1. Final report

International Nuclear Information System (INIS)

Deng, D.; Renfro, J.; Statton, J.

1994-07-01

The U.S. nuclear power industry, through coordination by the Nuclear Management and Resources Council (NUMARC), and sponsorship by the U.S. Department of Energy (DOE) and the Electric Power Research Institute (EPRI), has evaluated age-related degradation effects for a number of major plant systems, structures, and components, in the license renewal technical Industry Reports (IRs). License renewal applicants may choose to reference these IRs in support of their plant-specific license renewal applications, as an equivalent to the integrated plant assessment provisions of the license renewal rule (10 CFR Part 54). This IR provides the technical basis for license renewal for U.S. nuclear power plant Class I structures, with the IR evaluating which structures are Class I. Seventeen structures are explicitly described and evaluated in this IR. These structures are not necessarily classified as Class I at all plants, therefore the license renewal applicant should consult this IR for correct identification

An overview of the class I structures license renewal industry report

International Nuclear Information System (INIS)

Renfro, L.J.; Statton, J.A.

1991-01-01

License renewal of a commercial nuclear power plant requires verification that systems, structures and components important to license renewal can perform their intended safety functions throughout the license renewal term. The verification of this continuing performance includes a technical evaluation of the effects of age-related degradation. An industry report (IR) sponsored by the nuclear industry was developed which identifies potentially significant age-related degradation mechanisms that may affect Class I structures and evaluates their impact on the ability of the structures to continue to perform their safety functions. Preventive and/or mitigative options are outlined for managing degradation mechanisms that could significantly affect plant performance during the license renewal period. This paper provides a summary of the IR. (author)

Structural analysis of ceramic blocks sealing or structural incorporated with the industrial laundry sludge

International Nuclear Information System (INIS)

Almeida, P.H.S.; Grippe, V.Y.Q.; Goulart, J.V.

2016-01-01

Industrial and commercial development of recent decades has led to an increase in waste generation. Thus, it is necessary to develop alternative and effective methods of treatment, replacing the simple disposal of these wastes in landfills. The objective of this work is to study the incorporation of textile industrial laundries sludge in ceramic blocks sealing or structural. Samples of ceramic blocks were produced using formulation with 20% sludge, the mass of ceramic clay. Structural analysis of the block was observed the tendency of most empty emergence (pores) during the firing of the blocks, as textile sludge was added in the ceramic paste composition. The mechanical testing of blocks compressive strength was above the minimum 3.0 MPa specified by the standard limit. The physical test water absorption of the blocks was within the range 8 to 22% specified by the standard. (author)

Estimating the Contribution of Industry Structure Adjustment to the Carbon Intensity Target: A Case of Guangdong

Directory of Open Access Journals (Sweden)

Ping Wang

2016-04-01

Full Text Available Industry structure adjustment is an effective measure to achieve the carbon intensity target of Guangdong Province. Accurately evaluating the contribution of industry structure adjustment to the carbon intensity target is helpful for the government to implement more flexible and effective policies and measures for CO2 emissions reduction. In this paper, we attempt to evaluate the contribution of industry structure adjustment to the carbon intensity target. Firstly, we predict the gross domestic product (GDP with scenario forecasting, industry structure with the Markov chain model, CO2 emissions with a novel correlation mode based on least squares support vector machine, and then we assess the contribution of industry structure adjustment to the carbon intensity target of Guangdong during the period of 2011–2015 under nine scenarios. The obtained results show, in the ideal scenario, that the economy will grow at a high speed and the industry structure will be significantly adjusted, and thus the carbon intensity in 2015 will decrease by 25.53% compared to that in 2010, which will make a 130.94% contribution to the carbon intensity target. Meanwhile, in the conservative scenario, the economy will grow at a low speed and the industry structure will be slightly adjusted, and thus the carbon intensity in 2015 will decrease by 23.89% compared to that in 2010, which will make a 122.50% contribution to the carbon intensity target.

ASPECTS REGARDING THE STRUCTURE OF GRADUATION PAPERS IN INDUSTRIAL DESIGN

Directory of Open Access Journals (Sweden)

BOLOŞ Codruţa

2008-07-01

Full Text Available The paper presents aspects regarding the structure, themes and content of graduation papers in the specialization of Industrial Design within Petru Maior University of Târgu Mures.

Food industry structure in Norway and Denmark since the 1990s

DEFF Research Database (Denmark)

Klimek, Bjørn; Hansen, Henning Otte

2017-01-01

Structural changes in Norwegian and Danish food industry since the 1990s is analysed as a path dependent response to the neo-liberal turn. Norway entered the 1990s as a protected market and Denmark as case of an export oriented industry. These developmental strategies are rooted in early 20th...... ‘varieties of capitalism’ framework with corporate strategy theories on food industry M&As. We identify two different types of path dependent development, a self-reinforcing in Denmark and a transformative ‘breaking point’ in Norway....

Implications of NGA for NEHRP site coefficients

Science.gov (United States)

Borcherdt, Roger D.

2012-01-01

Three proposals are provided to update tables 11.4-1 and 11.4-2 of Minimum Design Loads for Buildings and Other Structures (7-10), by the American Society of Civil Engineers (2010) (ASCE/SEI 7-10), with site coefficients implied directly by NGA (Next Generation Attenuation) ground motion prediction equations (GMPEs). Proposals include a recommendation to use straight-line interpolation to infer site coefficients at intermediate values of ̅vs (average shear velocity). Site coefficients are recommended to ensure consistency with ASCE/SEI 7-10 MCER (Maximum Considered Earthquake) seismic-design maps and simplified site-specific design spectra procedures requiring site classes with associated tabulated site coefficients and a reference site class with unity site coefficients. Recommended site coefficients are confirmed by independent observations of average site amplification coefficients inferred with respect to an average ground condition consistent with that used for the MCER maps. The NGA coefficients recommended for consideration are implied directly by the NGA GMPEs and do not require introduction of additional models.

Studies on the structure of industrial high methoxyl pectins

NARCIS (Netherlands)

Kravtchenko, T.P.

1992-01-01

The chemical structure of three industrial high methoxyl pectins (one extracted from apple pomace and two from lemon peels) has been extensively investigated. The apple pectin differs from the lemon ones by having a higher apparent molecular size, a higher neutral-sugar content, present

Influence of the structure of bile acids on their partition coefficient in dibutyl ether and chloroform

Directory of Open Access Journals (Sweden)

Sebenji Ana S.

2015-01-01

Full Text Available Bile acids are well known natural surfactants able to modify the per­meability of biological membranes. The logarithm of partition coefficient between, tradi­tionally used, n-octanol and water is a measure of lipophilicity as a predictor of solute membrane partitioning. The aim of this work was to determine partition coefficients of bile acids in a mixture of water and chloroform and dibutyl ether at different pH values and with addition of different concentrations of sodium ions, and to examine the influence of the structure of bile acid nucleus on measured partition coefficients. Partition coefficients of three bile acid salts were determined using shake-flask method and the concentration of bile acids was determined after twelve hours of shaking at the room temperature in aqueous and organic layer using reversed phase HPLC with DAD detector on 210 nm. For all three analysed bile acid salts values of logP are lower in dibutyl ether than in chloroform. At certain pH values, curves representing the dependence of partition coeffi­cient on pH value intersect, and these are the pH values for which partition coefficients are the same for both solvents. Increasing the solution ionic strength, this intersection is shifted toward lower pH values. It is found that, for both organic solvents, after the addition of hy­droxyl group in the steroid nucleus (i.e. if the bile acid is less hydrophobic the value of logP falls, especially if more hydroxyl groups are present. With chloroform as a solvent, system quickly comes to excess with electrolyte ions than with dibutyl ether. [Projekat Ministarstva nauke Republike Srbije, br. 172021

Atmospheric ventilation corridors and coefficients for pollution plume ...

African Journals Online (AJOL)

This study presents a comparative investigation of atmospheric ventilation corridors and coefficients for gaseous pollution plume released from an isolated industrial facility into the ambient air of the host community in Ile-Ife suburb, southwest Nigeria. For the months of September to December in the year 2012 and 2013, ...

Electric Industry Structure and Regulatory Responses in a High Distributed Energy Resources Future

Energy Technology Data Exchange (ETDEWEB)

Corneli, Steve [Seventhwave, Madison, WI (United States); Kihm, Steve [Seventhwave, Madison, WI (United States); Schwartz, Lisa [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States)

2015-11-01

The emergence of distributed energy resources (DERs) that can generate, manage and store energy on the customer side of the electric meter is widely recognized as a transformative force in the power sector. This report focuses on two key aspects of that transformation: structural changes in the electric industry and related changes in business organization and regulation that are likely to result from them. Both industry structure and regulation are inextricably linked. History shows that the regulation of the power sector has responded primarily to innovation in technologies and business models that created significant structural changes in the sector’s cost and organizational structure.

Development of a web based instrument on higher education structures of industrial engineering

OpenAIRE

Tarba Ioan-Cristian

2017-01-01

The research and development of assisted operational instruments on higher education structures of industrial engineering represent a continuous and complex process. The present paper contributes to the building up of support elements and an assisted operational instrument on higher education structures of industrial engineering, with focus on the specific curricula. The use of tested and validated constructive solutions from other projects, as base for the new design, reduces the design time.

Industrial electricity demand for Turkey: A structural time series analysis

International Nuclear Information System (INIS)

Dilaver, Zafer; Hunt, Lester C.

2011-01-01

This research investigates the relationship between Turkish industrial electricity consumption, industrial value added and electricity prices in order to forecast future Turkish industrial electricity demand. To achieve this, an industrial electricity demand function for Turkey is estimated by applying the structural time series technique to annual data over the period 1960 to 2008. In addition to identifying the size and significance of the price and industrial value added (output) elasticities, this technique also uncovers the electricity Underlying Energy Demand Trend (UEDT) for the Turkish industrial sector and is, as far as is known, the first attempt to do this. The results suggest that output and real electricity prices and a UEDT all have an important role to play in driving Turkish industrial electricity demand. Consequently, they should all be incorporated when modelling Turkish industrial electricity demand and the estimated UEDT should arguably be considered in future energy policy decisions concerning the Turkish electricity industry. The output and price elasticities are estimated to be 0.15 and - 0.16 respectively, with an increasing (but at a decreasing rate) UEDT and based on the estimated equation, and different forecast assumptions, it is predicted that Turkish industrial electricity demand will be somewhere between 97 and 148 TWh by 2020. -- Research Highlights: → Estimated output and price elasticities of 0.15 and -0.16 respectively. → Estimated upward sloping UEDT (i.e. energy using) but at a decreasing rate. → Predicted Turkish industrial electricity demand between 97 and 148 TWh in 2020.

A study of the irradiation temperature coefficient for L-alanine and DL-alanine dosemeters

International Nuclear Information System (INIS)

Desrosiers, M. F.; Lin, M.; Cooper, S. L.; Cui, Y.; Chen, K.

2006-01-01

Alanine dosimetry is now well established both as a reference and routine dosemeter for industrial irradiation processing. Accurate dosimetry under the relatively harsh conditions of industrial processing requires a characterisation of the parameters that influence the dosemeter response. The temperature of the dosemeter during irradiation is a difficult quantity to measure so that the accuracy of the temperature coefficient that governs the dosemeter response becomes a critical factor. Numerous publications have reported temperature coefficients for several types of alanine dosemeters. The observed differences in the measured values were commonly attributed to the differences in the polymer binder or the experimental design of the measurement. However, the data demonstrated a consistent difference in the temperature coefficients between L-alanine and DL-alanine. Since there were no commonalities in the dosemeter composition or the measurement methods applied, a clear conclusion is not possible. To resolve this issue, the two isomeric forms of alanine dosemeters were prepared and irradiated in an identical manner. The results indicated that the DL-alanine temperature coefficient is more than 50% higher than the L-alanine temperature coefficient. (authors)

Producing of Impedance Tube for Measurement of Acoustic Absorption Coefficient of Some Sound Absorber Materials

Directory of Open Access Journals (Sweden)

R. Golmohammadi

2008-04-01

Full Text Available Introduction & Objective: Noise is one of the most important harmful agents in work environment. In spit of industrial improvements, exposure with over permissible limit of noise is counted as one of the health complication of workers. In Iran, do not exact information of the absorption coefficient of acoustic materials. Iranian manufacturer have not laboratory for measured of sound absorbance of their products, therefore using of sound absorber is limited for noise control in industrial and non industrial constructions. The goal of this study was to design an impedance tube based on pressure method for measurement of the sound absorption coefficient of acoustic materials.Materials & Methods: In this study designing of measuring system and method of calculation of sound absorption based on a available equipment and relatively easy for measurement of the sound absorption coefficient related to ISO10534-1 was performed. Measuring system consist of heavy asbestos tube, a pure tone sound generator, calibrated sound level meter for measuring of some commonly of sound absorber materials was used. Results: In this study sound absorption coefficient of 23 types of available acoustic material in Iran was tested. Reliability of results by three repeat of measurement was tested. Results showed that the standard deviation of sound absorption coefficient of study materials was smaller than .Conclusion: The present study performed a necessary technology of designing and producing of impedance tube for determining of acoustical materials absorption coefficient in Iran.

Study on GPS Common-view Observation Data with Multiscale Kalman Filter Based on Correlation Structure of the Discrete Wavelet Coefficients

National Research Council Canada - National Science Library

Xiaojuan, Ou; Wei, Zhou; Jianguo, Yu

2005-01-01

In this paper, we pay our attention to the multiscale kalman algorithm based on correlation structure of the discrete wavelet coefficients for the restoration of the GPS common-view observation data...

FORMATION OF ORGANIZATIONAL AND ECONOMIC INTEGRATED STRUCTURES IN THE ALUMINUM INDUSTRY

Directory of Open Access Journals (Sweden)

S. B. Kazbekova

2013-01-01

Full Text Available The paper reveals the theoretical foundations of economic efficiency of production and integrated structures formation. Their advantages are demonstrated by the example of the formation of vertically integrated structures in the aluminium industry in the framework created by smelting aluminium cluster inKazakhstan. Also examines the valuable experience gained in the organization of such structures in theRussian Federationin recent years

Industry structure and the performance of the Global System for ...

African Journals Online (AJOL)

telecommunication operators in Nigeria. ... This study investigates industry structure and its relationship with the performance of GSM network operators in Nigeria. A cross-sectional survey research design was adopted with the use of primary data, ...

PATENTS, R&D, AND MARKET STRUCTURE IN THE U.S. FOOD PROCESSING INDUSTRY

OpenAIRE

Gopinath, Munisamy; Vasavada, Utpal

1999-01-01

This study investigates the effects of market structure and research and development (R&D) on the innovation activities of firms. Fixed and random effects count data models are estimated with firm-level data for the U.S. food processing industry. Results show a positive association between patents and R&D, and patents and market structure, suggesting that firms which exhibit noncompetitive behavior are likely to develop new products and processes. Significant intra-industry spillovers of know...

Measuring structural (un)safety in the Dutch building industry

NARCIS (Netherlands)

Terwel, K.C.; Waarts, P; E Rademaeker, de

2010-01-01

The last 10 years the Dutch Building Industry was shocked by several major accidents. In 2001 the steel structure of a theatre in Hoorn collapsed during erection. No one was hurt, because it collapsed during the night. In 2002 part of the parking deck of a hotel collapsed just some time after a

Structure, conduct, and sustainability of the international low-enriched fuel fabrication industry

International Nuclear Information System (INIS)

Rothwell, Geoffrey

2008-01-01

This paper examines the cost structures of fabricating Low-Enriched Uranium fuel (LEU, enriched to 5% enrichment) light water reactor fuels. The LEU industry is decades old, and (except for high entry cost, i.e., the cost of designing and licensing a fuel fabrication facility and its fuel), labor and additional fabrication lines can be added by industry incumbents at Nth-of-a-Kind cost to the maximum capacity allowed by the license. On the other hand, new entrants face higher First-of-a-Kind costs and high new-facility licensing costs, increasing the scale required for entry thus discouraging small scale entry by countries with only a few nuclear power plants. Therefore, the industry appears to be competitive with sustainable investment in fuel-cycle states, and structural barriers-to-entry increase its proliferation resistance. (author)

Cost and return structure in sawmill industry in Ijebu Ode, Ogun state ...

African Journals Online (AJOL)

Cost and return structure in sawmill industry in Ijebu Ode, Ogun state, Nigeria. ... The finding showed that 32.6% of the industries were retailers while 30.4% were wholesalers of timbers and both had regular supply of the products. The working capital among the timbers business was N3,641,905.6 and the average annual ...

The impact of firm and industry characteristics on small firms' capital structure

NARCIS (Netherlands)

Degryse, H.A.; de Goeij, P. C.; Kappert, P.

2012-01-01

We study the impact of firm and industry characteristics on small firms’ capital structure, employing a proprietary database containing financial statements of Dutch small and medium-sized enterprises (SMEs) from 2003 to 2005. The firm characteristics suggest that the capital structure decision is

76 FR 35912 - Business Jet Aircraft Industry: Structure and Factors Affecting Competitiveness; Institution of...

Science.gov (United States)

2011-06-20

... structure of the global industry, including supply chain relationships and foreign direct investment; 2. An... competitiveness of the business jet aircraft industry in the United States, Brazil, Canada, Europe, and China. To...

Network structure detection and analysis of Shanghai stock market

Directory of Open Access Journals (Sweden)

Sen Wu

2015-04-01

Full Text Available Purpose: In order to investigate community structure of the component stocks of SSE (Shanghai Stock Exchange 180-index, a stock correlation network is built to find the intra-community and inter-community relationship. Design/methodology/approach: The stock correlation network is built taking the vertices as stocks and edges as correlation coefficients of logarithm returns of stock price. It is built as undirected weighted at first. GN algorithm is selected to detect community structure after transferring the network into un-weighted with different thresholds. Findings: The result of the network community structure analysis shows that the stock market has obvious industrial characteristics. Most of the stocks in the same industry or in the same supply chain are assigned to the same community. The correlation of the internal stock prices’ fluctuation is closer than in different communities. The result of community structure detection also reflects correlations among different industries. Originality/value: Based on the analysis of the community structure in Shanghai stock market, the result reflects some industrial characteristics, which has reference value to relationship among industries or sub-sectors of listed companies.

Diffusion coefficients of paracetamol in aqueous solutions

International Nuclear Information System (INIS)

Ribeiro, Ana C.F.; Barros, Marisa C.F.; Veríssimo, Luís M.P.; Santos, Cecilia I.A.V.; Cabral, Ana M.T.D.P.V.; Gaspar, Gualter D.; Esteso, Miguel A.

2012-01-01

Highlights: ► Mutual diffusion coefficients of paracetamol in aqueous dilute solutions. ► Influence of the thermodynamic factors on the variation of their mutual diffusion coefficients. ► Estimation of the mutual limiting diffusion coefficients of the molecular, D m 0 , and ionized forms, D ± 0 , of this drug. - Abstract: Binary mutual diffusion coefficients measured by the Taylor dispersion method, for aqueous solutions of paracetamol (PA) at concentrations from (0.001 to 0.050) mol·dm −3 at T = 298.15 K, are reported. From the Nernst–Hartley equation and our experimental results, the limiting diffusion coefficient of this drug and its thermodynamic factors are estimated, thereby contributing in this way to a better understanding of the structure of such systems and of their thermodynamic behaviour in aqueous solution at different concentrations.

Industrial structure at research reactor suppliers

International Nuclear Information System (INIS)

Roegler, H.-J.; Bogusch, E.; Friebe, T.

2001-01-01

Due to the recent joining of the forces of Framatome S. A. from France and the Nuclear Division of Siemens AG Power Generation (KWU) from Germany to a Joint Venture named Framatome Advanced Nuclear Power S.A.S., the issue of the necessary and of the optimal industrial structure for nuclear projects as a research reactor is, was discussed internally often and intensively. That discussion took place also in the other technical fields such as Services for NPPs but also in the field of interest here, i. e. Research Reactors. In summarizing the statements of this presentation one can about state that: Research Reactors are easier to build than NPPs, but not standardised; Research Reactors need a wide spectrum of skills and experiences; to design and build Research Reactors needs an experienced team especially in terms of management and interfaces; Research Reactors need background from built reference plants more than from operating plants; Research Reactors need knowledge of suitable experienced subsuppliers. Two more essential conclusions as industry involved in constructing and upgrading research reactors are: Research Reactors by far are more than a suitable core that generates a high neutron flux; every institution that designs and builds a Research Reactor lacks quality or causes safety problems, damages the reputation of the entire community

Differences between charged-current coefficient functions

International Nuclear Information System (INIS)

Moch, S.; Rogal, M.; Vogt, A.

2007-08-01

Second- and third-order results are presented for the structure functions of charged-current deepinelastic scattering in the framework of massless perturbative QCD. We write down the two-loop differences between the corresponding crossing-even and -odd coefficient functions, including those for the longitudinal structure function not covered in the literature so far. At three loops we compute the lowest five moments of these differences for all three structure functions and provide approximate expressions in Bjorken-x space. Also calculated is the related third-order coefficient-function correction to the Gottfried sum rule. We confirm the conjectured suppression of these quantities if the number of colours is large. Finally we derive the second- and third-order QCD contributions to the Paschos-Wolfenstein ratio used for the determination of the weak mixing angle from neutrino-nucleon deep-inelastic scattering. These contributions are found to be small. (orig.)

Differences between charged-current coefficient functions

Energy Technology Data Exchange (ETDEWEB)

Moch, S.; Rogal, M. [Deutsches Elektronen-Synchrotron (DESY), Zeuthen (Germany); Vogt, A. [Liverpool Univ. (United Kingdom). Dept. of Mathematical Sciences

2007-08-15

Second- and third-order results are presented for the structure functions of charged-current deepinelastic scattering in the framework of massless perturbative QCD. We write down the two-loop differences between the corresponding crossing-even and -odd coefficient functions, including those for the longitudinal structure function not covered in the literature so far. At three loops we compute the lowest five moments of these differences for all three structure functions and provide approximate expressions in Bjorken-x space. Also calculated is the related third-order coefficient-function correction to the Gottfried sum rule. We confirm the conjectured suppression of these quantities if the number of colours is large. Finally we derive the second- and third-order QCD contributions to the Paschos-Wolfenstein ratio used for the determination of the weak mixing angle from neutrino-nucleon deep-inelastic scattering. These contributions are found to be small. (orig.)

Clustering Coefficients for Correlation Networks

Directory of Open Access Journals (Sweden)

Naoki Masuda

2018-03-01

Full Text Available Graph theory is a useful tool for deciphering structural and functional networks of the brain on various spatial and temporal scales. The clustering coefficient quantifies the abundance of connected triangles in a network and is a major descriptive statistics of networks. For example, it finds an application in the assessment of small-worldness of brain networks, which is affected by attentional and cognitive conditions, age, psychiatric disorders and so forth. However, it remains unclear how the clustering coefficient should be measured in a correlation-based network, which is among major representations of brain networks. In the present article, we propose clustering coefficients tailored to correlation matrices. The key idea is to use three-way partial correlation or partial mutual information to measure the strength of the association between the two neighboring nodes of a focal node relative to the amount of pseudo-correlation expected from indirect paths between the nodes. Our method avoids the difficulties of previous applications of clustering coefficient (and other measures in defining correlational networks, i.e., thresholding on the correlation value, discarding of negative correlation values, the pseudo-correlation problem and full partial correlation matrices whose estimation is computationally difficult. For proof of concept, we apply the proposed clustering coefficient measures to functional magnetic resonance imaging data obtained from healthy participants of various ages and compare them with conventional clustering coefficients. We show that the clustering coefficients decline with the age. The proposed clustering coefficients are more strongly correlated with age than the conventional ones are. We also show that the local variants of the proposed clustering coefficients (i.e., abundance of triangles around a focal node are useful in characterizing individual nodes. In contrast, the conventional local clustering coefficients

Clustering Coefficients for Correlation Networks.

Science.gov (United States)

Masuda, Naoki; Sakaki, Michiko; Ezaki, Takahiro; Watanabe, Takamitsu

2018-01-01

Graph theory is a useful tool for deciphering structural and functional networks of the brain on various spatial and temporal scales. The clustering coefficient quantifies the abundance of connected triangles in a network and is a major descriptive statistics of networks. For example, it finds an application in the assessment of small-worldness of brain networks, which is affected by attentional and cognitive conditions, age, psychiatric disorders and so forth. However, it remains unclear how the clustering coefficient should be measured in a correlation-based network, which is among major representations of brain networks. In the present article, we propose clustering coefficients tailored to correlation matrices. The key idea is to use three-way partial correlation or partial mutual information to measure the strength of the association between the two neighboring nodes of a focal node relative to the amount of pseudo-correlation expected from indirect paths between the nodes. Our method avoids the difficulties of previous applications of clustering coefficient (and other) measures in defining correlational networks, i.e., thresholding on the correlation value, discarding of negative correlation values, the pseudo-correlation problem and full partial correlation matrices whose estimation is computationally difficult. For proof of concept, we apply the proposed clustering coefficient measures to functional magnetic resonance imaging data obtained from healthy participants of various ages and compare them with conventional clustering coefficients. We show that the clustering coefficients decline with the age. The proposed clustering coefficients are more strongly correlated with age than the conventional ones are. We also show that the local variants of the proposed clustering coefficients (i.e., abundance of triangles around a focal node) are useful in characterizing individual nodes. In contrast, the conventional local clustering coefficients were strongly

Clustering Coefficients for Correlation Networks

Science.gov (United States)

Masuda, Naoki; Sakaki, Michiko; Ezaki, Takahiro; Watanabe, Takamitsu

2018-01-01

Graph theory is a useful tool for deciphering structural and functional networks of the brain on various spatial and temporal scales. The clustering coefficient quantifies the abundance of connected triangles in a network and is a major descriptive statistics of networks. For example, it finds an application in the assessment of small-worldness of brain networks, which is affected by attentional and cognitive conditions, age, psychiatric disorders and so forth. However, it remains unclear how the clustering coefficient should be measured in a correlation-based network, which is among major representations of brain networks. In the present article, we propose clustering coefficients tailored to correlation matrices. The key idea is to use three-way partial correlation or partial mutual information to measure the strength of the association between the two neighboring nodes of a focal node relative to the amount of pseudo-correlation expected from indirect paths between the nodes. Our method avoids the difficulties of previous applications of clustering coefficient (and other) measures in defining correlational networks, i.e., thresholding on the correlation value, discarding of negative correlation values, the pseudo-correlation problem and full partial correlation matrices whose estimation is computationally difficult. For proof of concept, we apply the proposed clustering coefficient measures to functional magnetic resonance imaging data obtained from healthy participants of various ages and compare them with conventional clustering coefficients. We show that the clustering coefficients decline with the age. The proposed clustering coefficients are more strongly correlated with age than the conventional ones are. We also show that the local variants of the proposed clustering coefficients (i.e., abundance of triangles around a focal node) are useful in characterizing individual nodes. In contrast, the conventional local clustering coefficients were strongly

Accounting for Missing Correlation Coefficients in Fixed-Effects MASEM.

Science.gov (United States)

Jak, Suzanne; Cheung, Mike W-L

2018-01-01

Meta-analytic structural equation modeling (MASEM) is increasingly applied to advance theories by synthesizing existing findings. MASEM essentially consists of two stages. In Stage 1, a pooled correlation matrix is estimated based on the reported correlation coefficients in the individual studies. In Stage 2, a structural model (such as a path model) is fitted to explain the pooled correlations. Frequently, the individual studies do not provide all the correlation coefficients between the research variables. In this study, we modify the currently optimal MASEM-method to deal with missing correlation coefficients, and compare its performance with existing methods. This study is the first to evaluate the performance of fixed-effects MASEM methods under different levels of missing correlation coefficients. We found that the often used univariate methods performed very poorly, while the multivariate methods performed well overall.

Genetic modification and its impact on industry structure and performance

NARCIS (Netherlands)

Vlaar, P.W.L.; van Beek, P.; Visser, R.G.F.

2007-01-01

Genetic modification has led to fierce debates around the world. Nevertheless, scientific evidence for its potential effects on the structure and performance of industries has hitherto remained rather meagre. In this article, we take some preliminary steps towards closing this gap by exploring the

Nuclear data propagation with burnup. Impact on SFR reactivity coefficients

International Nuclear Information System (INIS)

Buiron, Laurent; Plisson-Rieunier, Daniele

2017-01-01

For the next generation fast reactor design, the Generation IV International Forum (GIF) defined global objectives in terms of safety improvement, sustainability, waste minimization and non-proliferation. Among the possibilities studied at CEA, Sodium cooled Fast Reactor (SFR) are studied as potential industrial tools for next decade's deployment. Many efforts have been made in the last years to obtain advanced industrial core designs that comply with these goals. Concerning safety issues, particular efforts have been made in order to obtain core designs that can be resilient to accidental transients. The 'safety' level of such new designs is often characterized by their 'natural' behavior under unprotected transients such as loss of flow or hypothetical transient over power. Transient analysis needs several accurate neutronic input data such as reactivity coefficient and kinetic parameters. Beside estimation of the level of 'absolute' values, associated uncertainties have also to be evaluated for the whole set of relevant data. These estimations have to be performed for different core state such as end of cycle core for feedback coefficient. This means that uncertainties have to be obtained not only a fixed time but also have to be propagated all through irradiation. To do so, we need to couple Boltzman and Bateman equations at sensitivities level. The coupling process could be done with the help of the perturbation theory which gives adapted framework suited for deterministic calculation codes. This coupling is currently in progress in ERANOS code system. The actual implementation gives access to estimation of sensitivities for both reactivity coefficients and mass balance. After a brief theoretical description of Boltzman/Bateman coupling capabilities in ERANOS, the study presented in this paper focuses on sensitivity and uncertainties estimation for the main feedback coefficients involved in fast reactor transients: the

Heat conduction coefficient and coefficient of linear thermal expansion of electric insulation materials for superconducting magnetic system

International Nuclear Information System (INIS)

Deev, V.I.; Sobolev, V.P.; Kruglov, A.B.; Pridantsev, A.I.

1984-01-01

Results of experimental investigation of heat conduction coefficient and coefficient of linear thermal expansion and thermal shrinkages of the STEF-1 textolite-glass widely used in superconducting magnetic systems as electric insulating and structural material are presented. Samples of two types have been died: sample axisa is perpendicular to a plae of fiberglass layers ad sample axis is parallel to a plane of fiberglass layers. Heat conduction coefficient was decreased almost a five times with temperature decrease from 300 up to 5K and was slightly dependent on a sample type. Temperature variation of linear dimensions in a sample of the first type occurs in twice as fast as compared to the sample of the second type

Standardized Cost Structure for the Environmental Industry

International Nuclear Information System (INIS)

Skokan, B.; Melamed, D.; Guevara, K.; Mallick, P.; Bierman, G.; Marshall, H.E.

2006-01-01

The underlying key to developing successful estimates, tracking project costs, and utilizing historical project cost information is the development of standardized and well-defined hierarchical listing of cost categories. Committees within the U.S. Federal agencies have pioneered efforts toward developing the Environmental Cost Element Structure (ECES), which is key in achieving these goals. The ECES was developed using an iterative process with input from federal agencies and industry. Experts from several disciplines participated including engineers, cost estimators, project/program managers, and contract personnel. The ECES benefits from an intense analytical effort, the knowledge gained from the maturation of the environmental industry, and incorporation of past user's experiences. Building upon this foundation, the E06 committee of the ASTM International has now fully developed and published a standard (ASTM 2150-04) that provides standardized cost categories with complete cost category definitions. This standard affords environmental and nuclear D and D project managers the opportunity to have a well defined hierarchical listing of their estimates and actual costs, readily adapted to performing summations and roll-ups, supported by a multi-level dictionary specifically defining the content of the cost elements as well as the summations. Owing to the dynamic nature of the environmental technologies, efforts need to be made to continue to update this standard by adding new technologies and methods as they are developed and employed in the field. Lastly, the Environmental Cost Element Structure that is embodied in this standard also presents opportunities to develop historical cost databases and comprehensive life cycle cost estimates and standardized cost estimating tools. (authors)

The structure of atomic power industry with allowance for energy production other than electricity

International Nuclear Information System (INIS)

Aleksandrov, A.P.; Legasov, V.A.; Sidorenko, V.A.; Ponomarev-Stepnoj, N.N.; Protsenko, A.N.; Grebennik, V.N.; Glushkov, E.S.

1977-01-01

The important tendency in the development of nuclear power is broadening the scope of its application for substitution of mineral fuel by the nuclear one not only at the electrical power production but in other energy consuming fields of industry. The development of large-scale nuclear power plants permits the provision of the significant part of energy supply of all kinds and save on oil and gas. Scales and rates of development of nuclear power are estimated for the model society on the basis of predicted need energy consumption per capita. The possible rates and scales of nuclear power development are determined at some alternative amounts of potential reserves of organic fuel (oil, gas) per capita and within the economically and ecologically reasonable scales of coal utilization. There has been given the analysis of possible scopes of application of nuclear power industry: for production of electricity, central heating, hydrogen generation, gasification of coals, metallurgy, chemistry by means of medium- and high-temperature reactors. The conceivable relation between electrical energy and heat production in energetics and the nuclear power industry and the dynamics of change in this relation is being forecasted. The promising development of high temperature helium reactors has been discussed. Considerations on possible effect of thorium cycle on the structure of nuclear power industry are outlined. The nuclear power industry is being developed mainly on the basis of nuclear power plants with thermal reactors and it should not be expected for the next decade that its structure is to change significantly. However, the development of only this type reactors will require, as early as the end of this century, the significant consumption of natural uranium and considerable increase in capacities of uranium output and uranium enrichment industry. Therefore, in the following stages of development of nuclear power industry it is necessary to introduce fast breeders

Development of Falling Film Heat Transfer Coefficient for Industrial Chemical Processes Evaporator Design

KAUST Repository

Shahzad, Muhammad Wakil; Burhan, Muhammad; Ng, Kim Choon

2018-01-01

In falling film evaporators, the overall heat transfer coefficient is controlled by film thickness, velocity, liquid properties and the temperature differential across the film layer. This chapter presents the heat transfer behaviour for evaporative

Post-industrial Objects and Buildings in the Structure of the Contemporary City

Science.gov (United States)

Klopotowski, Maciej; Zagroba, Marek

2017-12-01

In the second half of the 19th century, provincial Bialystok became the largest industrial city in the eastern territories of the former Republic of Poland. The cause of this economic growth was the development of the railway network and changing customs policy in the Russian Empire. Over a dozen or so years, several dozens of textile factories and numerous craft workshops were established in the city. The industrial prosperity of the city development was interrupted by the First and Second World War. The second half of the twentieth century also brought political and economic changes. They resulted from the nationalization of industry and the introduction of a socialist economy. In the following decades, heavy and light industries developed in the city. Metallurgical plants and factories of houses, furniture, carpets, packaging, electronics, glassworks and food processing were established. On the outskirts of the city appeared industrial districts, which except the factories concentrated also storage facilities. Economic changes that took place in Poland after 1989 caused another change in the area of Białystok industry. Many state-owned factories went bankrupt and the remaining facilities and areas had to change their intended use. The conducted research compares the methods of dealing with the currently unnecessary structure. This has taken into account its location value in the city’s structure and its cultural characteristics. Analyses allowed to indicate new use of post-industrial facilities. There were selected post-industrial buildings that currently serve residential, office, educational and commercial purposes or house cultural institutions. There are also indicated facilities that have not found their new destination and have been demolished or are not currently in use. In conclusion, the research found that the city’s post-industrial legacy is equal to its heritage - it builds the identity of the place and it is also the difficult urban problem of

Optimizing the structure of financial resources of industrial enterprises in the market economy mechanism

Directory of Open Access Journals (Sweden)

A. Vlasov

2015-01-01

Full Text Available The article deals with the optimization of the structure of financial resources of industrial enterprises in the market economy mechanism. The slowdown of the Russian economy force companies to promote more accurate system financial planning its activities. In modern economic conditions the company's performance is largely dependent on the ability of management to more accurately predict financial flows, as well as more accurately predict the financial and human resources to ensure solvency of the enterprise, thus more competent to form the strategy of development of the organization.Goal / task. The aim of the article the search for the optimal structure of financial resources of industrial enterprises in the market economy mechanism and to develop proposals for the sustainable development of the enterprise. The task of this article is to investigate the structure of financial resources of the enterprise, in a deteriorating economic situation that must be considered in the sustainable development of industrial enterprises.Methodology. In conducting this study the main sources of the original data were the materials of the state statistics, the works of famous economists. The basis of the methodological developments based on comparative methods of analysis.Results. Given the concept of optimizing the structure of financial resources of the industrial enterprises. It shows the influence of external and internal factors affecting the stability of the industrial enterprises. Highlighted the impact of the economic situation on the role of these factors.Conclusions / significance. In the current economic conditions of the state and the new economic realities, it is necessary to focus to industrial enterprises to conduct an effective economic policy, thereby improving the financial stability of the enterprise.

Sustainability of Governing Structures in Bulgarian Farming Industry

Directory of Open Access Journals (Sweden)

Hrabrin Bachev

2017-08-01

Full Text Available The issue of assessment of absolute and comparative sustainability of major governing structures in agrarian and farming industries is among the most topical issues for researchers, farmers, investors, administrators, politicians, interests groups, and the public worldwide. Despite this issue, practically there are no assessments on the sustainability level of the major types of Bulgarian farming enterprises in the conditions of European Union Common Agricultural Policy implementation. This study applies a holistic framework and assesses the absolute and comparative sustainability of major governing structures in Bulgarian farming industry—unregistered holdings, sole traders, cooperatives, and companies of various types. In this paper, the method of the study is outlined, the inclusion of a novel “governance aspect” of sustainability is justified, and the overall characteristics of the surveyed farming enterprises are presented. Then, the integral, governance, economic, social, and environmental sustainability of the farming structures of different juridical types is assessed. Next, the structure of farming enterprises with different sustainability levels is analyzed. Finally, the conclusion from this study and the directions for further research and amelioration of sustainability assessments are presented.

Research on friction coefficient of nuclear Reactor Vessel Internals Hold Down Spring: Stress coefficient test analysis method

International Nuclear Information System (INIS)

Linjun, Xie; Guohong, Xue; Ming, Zhang

2016-01-01

friction coefficient f of the K1000 HDS are further calculated to be 0.336 by stress coefficient k f . It is very important that the research method of friction coefficient put forward by this paper for the first time. The method can provide an exact basis for HDS design and structure selection and can provide a guarantee for the safe operation of the reactor.

Research on friction coefficient of nuclear Reactor Vessel Internals Hold Down Spring: Stress coefficient test analysis method

Energy Technology Data Exchange (ETDEWEB)

Linjun, Xie, E-mail: linjunx@zjut.edu.cn [College of Mechanical Engineering, Zhejiang University of Technology, Hangzhou 310014 (China); Guohong, Xue; Ming, Zhang [Shanghai Nuclear Engineering Research & Design Institute, Shanghai 200233 (China)

2016-08-01

friction coefficient f of the K1000 HDS are further calculated to be 0.336 by stress coefficient k{sub f}. It is very important that the research method of friction coefficient put forward by this paper for the first time. The method can provide an exact basis for HDS design and structure selection and can provide a guarantee for the safe operation of the reactor.

Damage indication in smart structures using modal effective electromechanical coupling coefficients

International Nuclear Information System (INIS)

Al-Ajmi, M A; Benjeddou, A

2008-01-01

This work explores the use, in structural health monitoring, of the so-called modal effective electromechanical coupling coefficient (EMCC) as a damage indicator for structures with failures such as cracks. For this purpose, a discrete layered finite element (FE) model for smart beams is proposed and applied to short-circuit (SC) and open-circuit (OC) modal analyses of healthy and damaged (cracked) cantilever beams with symmetrically surface-bonded piezoelectric patches. Focus is made here on enhancing the electrical behavior modeling by introducing a quadratic bubble function in the electric potential through-the-thickness approximation. Therefore, the corresponding higher-order potential (HOP) degree of freedom is condensed at the ply level, leading to a passive stiffening effect (SE) similar to the so-called higher-order induced potential (HIP); then the physical equipotential (EP) electrode effect, often neglected in the piezoelectric FE literature, is here implemented after the electrodes' FE assembly. After its validation against available analytical and experimental results, the proposed piezoelectric FE is used for parametric analyses of SC-based and OC-based EMCC change factors (ECFs) and frequency change factors (FCFs) in terms of the crack depth and position ratios. It was found that the EP effect was more influential on the ECF than the SE. However, for the FCFs, the EP effect was influential only when it is defined from the OC frequencies. Finally, the ECFs were found to be higher than the FCFs, in particular for higher modes

Relaxation of structural parameters and potential coefficients of nonrigid molecules. General symmetry properties and application to ab initio study of 1,2-difluoroethane

Science.gov (United States)

Ha, T.-K.; Günthard, H. H.

1989-07-01

Structural parameters like bond length, bond angles, etc. and harmonic and anharmonic potential coefficients of molecules with internal rotation, inversion or puckering modes are generally assumed to vary with the large amplitude internal coordinates in a concerted manner (relaxation). Taking the coordinate vectors of the nuclear configuration of semirigid molecules with relaxation (SRMRs) as functions of relaxing structural parameters and finite amplitude internal coordinate, the isometric group of SRMRs is discussed and the irreducible representations of the latter are shown to classify into engendered and nonengendered ones. On this basis a concept of equivalent sets of nuclei SRMRs is introduced and an analytical expression is derived which defines the most general functional form of relaxation increments of all common types of structural parameters compatible with isometric symmetry. This formula is shown to be a close analog of an analytical expression defining the transformations induced by the isometric group of infinitesimal internal coordinates associated with typical structural parameters. Furthermore analogous formulae are given for the most general form of the relaxation of harmonic potential coefficients as a function of finite internal coordinates. The general relations are illustrated by ab initio calculations for 1,2-difluoroethane at the MP4/DZP//HF/4-31G* level for twelve values of the dihedral angle including complete structure optimization. The potential to internal rotation is found to be in essential agreement with experimentally derived data. For a complete set of ab initio structural parameters the associated relaxation increments are represented as Fourier series, which are shown to confirm the form predicted by the general formula and the isometric group of 1,2-difluoroethane. Depending on type of the structural parameters (bond length, bond angles, etc.), the associated relaxation increments appear to follow some simple rules. Similarly

Diffusion coefficients in 4-component mixture expressed explicitly in terms of binary diffusion coefficients and mole fractions

International Nuclear Information System (INIS)

Furuta, Hiroshi; Yamamoto, Ichiro

1996-01-01

Diffusion coefficients in 4-component mixture D ij (4) were expressed explicitly in terms of binary diffusion coefficients and mole fractions by solving a ratio of determinants defined by Hirschfelder et al. The explicit expressions of D ij (4) were divided into two terms, a term due to the i-j pairs of attention and a term common to all the pairs out of the 4 components. The two terms of D ij (4) had extended structures similar to corresponding those of D ij (3) respectively. (author)

Diffusion coefficients of decay products of radon and thoron

International Nuclear Information System (INIS)

Raghunath, B.; Kotrappa, P.

1979-01-01

The diffusion coefficients of the decay products of radon and thoron have relevance in the evaluation of inhalation hazards in uranium and thorium processing industries. A recently developed diffusion sampler, based on Mercer's theory of diffusional deposition between the concentric circular plates, has been used for determining the diffusion coefficients of the unattached decay products of radon and thoron (RaA, RaB, RaC and ThB). Experiments were conducted at different ventilation rates (6 and 60 changes/hr) at different relative humidities (10 and 90%) and both in air and argon atmospheres. Diffusion coefficients were found to increase with increasing ventilation rates and were found to decrease at higher relative humidities, the effect being more marked at lower ventilation rates. Both of these effects were less pronounced in argon than in air. Results are discussed in light of the known properties of these decay products. (author)

Development of a New Drag Coefficient Model for Oil and Gas ...

African Journals Online (AJOL)

Development of a New Drag Coefficient Model for Oil and Gas Multiphase Fluid Systems. ... PROMOTING ACCESS TO AFRICAN RESEARCH ... suspensions of solid particles are frequently encountered in many industrial processes including oil & gas production. ... EMAIL FREE FULL TEXT EMAIL FREE FULL TEXT

Definition of the filtration coefficient in the alluvial sands area of the Chernobyl NPP industrial site

International Nuclear Information System (INIS)

Panasyuk, N.I.

2014-01-01

Calculations of the filter coefficients of the alluvial soils of the first unconfined aquifer according roses pumping water from wells perfect. Filtration coefficient is one of the main parameters of the soil, which has a significant impact on the reliability of the forecasts of changes. Radio- hydrogeological conditions of the area and water calculations

The Structural Configurations of Alcohol in Denmark: Policy, Culture, and Industry

DEFF Research Database (Denmark)

Demant, Jakob; Krarup, Troels Magelund

2013-01-01

This article analyzes recent developments in Danish alcohol policy, culture, and industry. It reveals cross-sector dynamics and complexities often downplayed in existing literature. It traces how a stable “structural configuration” emerged in the 1960s-1980s between the three domains based...... on liberalization. However, in the 1990s, a particular adolescent alcohol culture of intoxication had emerged, raising public awareness and call for policy intervention. Contrary to what may have been expected, this rupture did not mean a break with the liberal alcohol configuration in policy, culture, and industry...

The telecommunications industry and economic growth: how the market structure matters

Czech Academy of Sciences Publication Activity Database

Jerbashian, Vahagn

2015-01-01

Roč. 51, December (2015), s. 515-523 ISSN 0264-9993 Grant - others:UK(CZ) GAUK 79310 Institutional support: PRVOUK-P23 Keywords : telecommunications industry * market structure * economic growth Subject RIV: AH - Economic s Impact factor: 0.997, year: 2015

The decision concerning the nuclear investment: influence of the industrial structure

International Nuclear Information System (INIS)

Guillerminet, M.L.

2000-10-01

This report aims to analyze the investment behavior of an enterprise producing nuclear origin electric power in an european market opening to the competition. In this context, the industrial structure controlled by the governor decides the investment in a marginal equipment: either an integrated monopole structure which leads to a regulation at the cost price rate of return; or a pool structure in which the governor intervene to fix the cost price at the marginal cost level given by the main technology of the gas combined cycles. (A.L.B.)

Dampak Liberalisasi Perdagangan Terhadap Kinerja Industri Manufaktur di Indonesia (Pendekatan Structure-Conduct-Performance

Directory of Open Access Journals (Sweden)

Hendy Aprilian Hidayat

2016-06-01

Full Text Available The influx of imported goods in the domestic market will pressure domestic producers to be more efficient. The more effiecient the domestic firm, the more competitive it becomes. This competitive firm is expected to have opportunities to expand to a larger market. This study analyzed the effect of trade liberalization to industrial performance in Indonesia. This study exploited data at the industry level, ie: 38 industries of three digits International Standard Industrial Classification (ISIC during 2000-2009. The analysis was conducted within Structure Conduct Performance (SCP framework. Industrial performance was measured by price-costmargin and trade liberalization was measured by export share and a dummy indicating implementation of Asean Free Trade Area (AFTA. Using the fixed effect model, the result showed weak evidence of the effect of trade liberalization to industrial performance in Indonesia. Dummy AFTA was negative and significant to industrial performance while export share was insignificant. The results might indicate that the adoption of AFTA endangered domestic firms’ performance.

Market Structure and Distribution of Benefits from Agricultural Exports: the Case of the Philippine Mango Industry

OpenAIRE

Briones, Roehlano M.

2013-01-01

To illuminate the role of agro-export industry in inclusive growth, this case study on Philippine mango focuses on the role of market structure in the distribution of export benefits. It is based on review of industry trends and related studies, open-ended interviews of key informants, and structured interviews of respondents situated along the value chain. The distribution of trade benefits is hypothesized to depend on both vertical and horizontal market structure. The former implies that a ...

The theoretical ultimate magnetoelectric coefficients of magnetoelectric composites by optimization design

International Nuclear Information System (INIS)

Wang, H.-L.; Liu, B.

2014-01-01

This paper investigates what is the largest magnetoelectric (ME) coefficient of ME composites, and how to realize it. From the standpoint of energy conservation, a theoretical analysis is carried out on an imaginary lever structure consisting of a magnetostrictive phase, a piezoelectric phase, and a rigid lever. This structure is a generalization of various composite layouts for optimization on ME effect. The predicted theoretical ultimate ME coefficient plays a similar role as the efficiency of ideal heat engine in thermodynamics, and is used to evaluate the existing typical ME layouts, such as the parallel sandwiched layout and the serial layout. These two typical layouts exhibit ME coefficient much lower than the theoretical largest values, because in the general analysis the stress amplification ratio and the volume ratio can be optimized independently and freely, but in typical layouts they are dependent or fixed. To overcome this shortcoming and achieve the theoretical largest ME coefficient, a new design is presented. In addition, it is found that the most commonly used electric field ME coefficient can be designed to be infinitely large. We doubt the validity of this coefficient as a reasonable ME effect index and consider three more ME coefficients, namely the electric charge ME coefficient, the voltage ME coefficient, and the static electric energy ME coefficient. We note that the theoretical ultimate value of the static electric energy ME coefficient is finite and might be a more proper measure of ME effect

A novel back-up control structure to manage nonroutine steam upsets in industrial methanol distillation columns

DEFF Research Database (Denmark)

Udugama, Isuru A.; Zander, Cornina; Mansouri, Seyed Soheil

2017-01-01

Industrial methanol production plants have extensive heat integration to achieve energy efficient operations where steam generated from these heat integration operations are used to provide reboiler duty for methanol distillation columns that purify crude methanol produced into industrial AA grade...... supervisory layer to control the column during these non-routine process upsets. These control schemes were tested against realistic reboiler duty disturbances that can occur in an industrial process. The tests revealed that both the MPC and supervisory systems control structures are able to regulate...... the process, even during sudden drops in reboiler duty. However, the cost of implementation and the relative simplicity will likely favour the implementation of the supervisory control structure in an industrial environment....

Interpretive Structural Model of Key Performance Indicators for Sustainable Maintenance Evaluatian in Rubber Industry

Science.gov (United States)

Amrina, E.; Yulianto, A.

2018-03-01

Sustainable maintenance is a new challenge for manufacturing companies to realize sustainable development. In this paper, an interpretive structural model is developed to evaluate sustainable maintenance in the rubber industry. The initial key performance indicators (KPIs) is identified and derived from literature and then validated by academic and industry experts. As a result, three factors of economic, social, and environmental dividing into a total of thirteen indicators are proposed as the KPIs for sustainable maintenance evaluation in rubber industry. Interpretive structural modeling (ISM) methodology is applied to develop a network structure model of the KPIs consisting of three levels. The results show the economic factor is regarded as the basic factor, the social factor as the intermediate factor, while the environmental factor indicated to be the leading factor. Two indicators of social factor i.e. labor relationship, and training and education have both high driver and dependence power, thus categorized as the unstable indicators which need further attention. All the indicators of environmental factor and one indicator of social factor are indicated as the most influencing indicator. The interpretive structural model hoped can aid the rubber companies in evaluating sustainable maintenance performance.

The telecommunications industry and economic growth: how the market structure matters

Czech Academy of Sciences Publication Activity Database

Jerbashian, Vahagn

2011-01-01

Roč. 3, č. 42 (2011), s. 1-68 ISSN N R&D Projects: GA MŠk LC542 Grant - others:UK(CZ) GAUK 79310 Institutional research plan: CEZ:MSM0021620846 Keywords : telecommunication industry * market structure * economic growth Subject RIV: AH - Economic s

Revisiting the variation of clustering coefficient of biological networks suggests new modular structure.

Science.gov (United States)

Hao, Dapeng; Ren, Cong; Li, Chuanxing

2012-05-01

A central idea in biology is the hierarchical organization of cellular processes. A commonly used method to identify the hierarchical modular organization of network relies on detecting a global signature known as variation of clustering coefficient (so-called modularity scaling). Although several studies have suggested other possible origins of this signature, it is still widely used nowadays to identify hierarchical modularity, especially in the analysis of biological networks. Therefore, a further and systematical investigation of this signature for different types of biological networks is necessary. We analyzed a variety of biological networks and found that the commonly used signature of hierarchical modularity is actually the reflection of spoke-like topology, suggesting a different view of network architecture. We proved that the existence of super-hubs is the origin that the clustering coefficient of a node follows a particular scaling law with degree k in metabolic networks. To study the modularity of biological networks, we systematically investigated the relationship between repulsion of hubs and variation of clustering coefficient. We provided direct evidences for repulsion between hubs being the underlying origin of the variation of clustering coefficient, and found that for biological networks having no anti-correlation between hubs, such as gene co-expression network, the clustering coefficient doesn't show dependence of degree. Here we have shown that the variation of clustering coefficient is neither sufficient nor exclusive for a network to be hierarchical. Our results suggest the existence of spoke-like modules as opposed to "deterministic model" of hierarchical modularity, and suggest the need to reconsider the organizational principle of biological hierarchy.

Link prediction with node clustering coefficient

Science.gov (United States)

Wu, Zhihao; Lin, Youfang; Wang, Jing; Gregory, Steve

2016-06-01

Predicting missing links in incomplete complex networks efficiently and accurately is still a challenging problem. The recently proposed Cannistrai-Alanis-Ravai (CAR) index shows the power of local link/triangle information in improving link-prediction accuracy. Inspired by the idea of employing local link/triangle information, we propose a new similarity index with more local structure information. In our method, local link/triangle structure information can be conveyed by clustering coefficient of common-neighbors directly. The reason why clustering coefficient has good effectiveness in estimating the contribution of a common-neighbor is that it employs links existing between neighbors of a common-neighbor and these links have the same structural position with the candidate link to this common-neighbor. In our experiments, three estimators: precision, AUP and AUC are used to evaluate the accuracy of link prediction algorithms. Experimental results on ten tested networks drawn from various fields show that our new index is more effective in predicting missing links than CAR index, especially for networks with low correlation between number of common-neighbors and number of links between common-neighbors.

Structure analysis and core community detection of embodied resources networks among regional industries

Science.gov (United States)

He, Xijun; Dong, Yanbo; Wu, Yuying; Wei, Guodan; Xing, Lizhi; Yan, Jia

2017-08-01

To address the double pressure of scarce resources and regional industrial isomorphism, this paper applied the concepts of exergy and embodied resources based on economic input-output (I-O) data. We constructed the embodied resources networks among the regional industries of Beijing-Tianjin-Hebei (also known as Jing-Jin-Ji) in China. We analyzed the rules of embodied resources consumption in the area's industries, identified the core community structures, and studied the characteristics of industrial homogeneity through regional comparisons. The results showed that the dependence on scarce resources of industrial operations in Beijing was less than in Jin-Ji, while the dependence on finance, technology, information, and other service resources in Beijing was higher than in Jin-Ji. The I-O efficiency of embodied resources among industries and the agglomeration of correlation relationships in industries with large embodied resources were higher than in Jin-Ji. The industrial coincidence degree in the ;bridge; industries and in the core community in Jin-Ji was higher than in Jing-Jin and Jing-Ji, which means the industrial homogeneous competition of Jin-Ji was higher, too. This study makes a significant contribution toward promoting the dislocation development of regional industries, accelerating the coordination of resources, and reducing homogeneity competition.

Market structure and the incentives to innovate in the Norwegian music industry

OpenAIRE

Engstrand, Andreas Prestegaard

2013-01-01

In this thesis, I study market structure and incentives to innovate in the Norwegian music industry. The industry has gone through significant changes since the year 2000. Every part of the value chain has been disrupted by technology, and the barriers to entry have decreased. However, major labels seem to have kept their market share. I define product and process innovation as respectively the release of a new artist and the release of a subsequent album. A product innovation ...

Auger coefficient in GaInN-based laser structures

Energy Technology Data Exchange (ETDEWEB)

Draeger, Alexander Daniel; Netzel, Carsten; Brendel, Moritz; Joenen, Holger; Rossow, Uwe; Hangleiter, Andreas [Institut fuer Angewandte Physik, TU Braunschweig (Germany)

2010-07-01

Todays GaInN-based light emitting devices such as LEDs and laser diodes show excellent properties in terms of quantum efficiency or threshold current in the violet-blue spectral region. With increasing wavelength towards the green this performance decreases strongly. In particular at longer wavelengths, the quantum efficiency decreases for higher current densities, called the efficiency droop. This phenomenon is still subject to intensive research and different mechanisms such as Auger recombination, losses due to dislocations and carrier escape have been named as possible explanations. We combine optical gain measurements using the variable stripe length technique with model calculations of the optical gain spectra to derive the carrier lifetime. From the dependence of the inverse effective lifetime on carrier density we determine the recombination coefficients for radiative, nonradiative and Auger recombination. The Auger coefficients we obtained are about 1-2 x 10{sup -31} cm{sup 6}/s for GaInN quantum wells with 2.5eV

Effect of gradient dielectric coefficient in a functionally graded material (FGM) substrate on the propagation behavior of love waves in an FGM-piezoelectric layered structure.

Science.gov (United States)

Cao, Xiaoshan; Shi, Junping; Jin, Feng

2012-06-01

The propagation behavior of Love waves in a layered structure that includes a functionally graded material (FGM) substrate carrying a piezoelectric thin film is investigated. Analytical solutions are obtained for both constant and gradient dielectric coefficients in the FGM substrate. Numerical results show that the gradient dielectric coefficient decreases phase velocity in any mode, and the electromechanical coupling factor significantly increases in the first- and secondorder modes. In some modes, the difference in Love waves' phase velocity between these two types of structure might be more than 1%, resulting in significant differences in frequency of the surface acoustic wave devices.

Diffusion Coefficients in Systems LDPE Plus Cyclohexane and LDPE Plus Benzene

Czech Academy of Sciences Publication Activity Database

Randová, A.; Bartovská, L.; Hovorka, Š.; Bartovský, T.; Poloncarzová, Magda; Friess, K.

-, 068 (2010), s. 1-6 ISSN 1618-7229 R&D Projects: GA ČR GA104/08/0600 Institutional research plan: CEZ:AV0Z40720504 Keywords : swelling * diffusion coefficients * low density polyethylene Subject RIV: CI - Industrial Chemistry, Chemical Engineering Impact factor: 0.574, year: 2010

Diffusion Decay Coefficient for Chloride Ions of Concrete Containing Mineral Admixtures

Directory of Open Access Journals (Sweden)

Jae-Im Park

2016-01-01

Full Text Available The diffusion coefficient for chloride ions and the diffusion decay coefficient for chloride ions are essential variables for a service life evaluation of concrete structures. They are influenced by water-binder ratio, exposure condition, curing temperature, cement type, and the type and use of mineral admixture. Mineral admixtures such as ground granulated blast furnace slag, fly ash, and silica fume have been increasingly used to improve resistance against chloride ions penetration in concrete structures built in an offshore environment. However, there is not enough measured data to identify the statistical properties of diffusion decay coefficient for chloride ions in concrete using mineral admixtures. This paper is aimed at evaluating the diffusion decay coefficient for chloride ions of concrete using ordinary Portland cement or blended cement. NT BUILD 492 method, an electrophoresis experiment, was used to measure the diffusion coefficient for chloride ions with ages. It was revealed from the test results that the diffusion decay coefficient for chloride ions was significantly influenced by W/B and the replacement ratio of mineral admixtures.

Revisiting the variation of clustering coefficient of biological networks suggests new modular structure

Directory of Open Access Journals (Sweden)

Hao Dapeng

2012-05-01

Full Text Available Abstract Background A central idea in biology is the hierarchical organization of cellular processes. A commonly used method to identify the hierarchical modular organization of network relies on detecting a global signature known as variation of clustering coefficient (so-called modularity scaling. Although several studies have suggested other possible origins of this signature, it is still widely used nowadays to identify hierarchical modularity, especially in the analysis of biological networks. Therefore, a further and systematical investigation of this signature for different types of biological networks is necessary. Results We analyzed a variety of biological networks and found that the commonly used signature of hierarchical modularity is actually the reflection of spoke-like topology, suggesting a different view of network architecture. We proved that the existence of super-hubs is the origin that the clustering coefficient of a node follows a particular scaling law with degree k in metabolic networks. To study the modularity of biological networks, we systematically investigated the relationship between repulsion of hubs and variation of clustering coefficient. We provided direct evidences for repulsion between hubs being the underlying origin of the variation of clustering coefficient, and found that for biological networks having no anti-correlation between hubs, such as gene co-expression network, the clustering coefficient doesn’t show dependence of degree. Conclusions Here we have shown that the variation of clustering coefficient is neither sufficient nor exclusive for a network to be hierarchical. Our results suggest the existence of spoke-like modules as opposed to “deterministic model” of hierarchical modularity, and suggest the need to reconsider the organizational principle of biological hierarchy.

The Bach equations in spin-coefficient form

Science.gov (United States)

Forbes, Hamish

2018-06-01

Conformal gravity theories are defined by field equations that determine only the conformal structure of the spacetime manifold. The Bach equations represent an early example of such a theory, we present them here in component form in terms of spin- and boost-weighted spin-coefficients using the compacted spin-coefficient formalism. These equations can be used as an efficient alternative to the standard tensor form. As a simple application we solve the Bach equations for pp-wave and static spherically symmetric spacetimes.

Estimation of kinship coefficient in structured and admixed populations using sparse sequencing data.

Directory of Open Access Journals (Sweden)

Jinzhuang Dou

2017-09-01

Full Text Available Knowledge of biological relatedness between samples is important for many genetic studies. In large-scale human genetic association studies, the estimated kinship is used to remove cryptic relatedness, control for family structure, and estimate trait heritability. However, estimation of kinship is challenging for sparse sequencing data, such as those from off-target regions in target sequencing studies, where genotypes are largely uncertain or missing. Existing methods often assume accurate genotypes at a large number of markers across the genome. We show that these methods, without accounting for the genotype uncertainty in sparse sequencing data, can yield a strong downward bias in kinship estimation. We develop a computationally efficient method called SEEKIN to estimate kinship for both homogeneous samples and heterogeneous samples with population structure and admixture. Our method models genotype uncertainty and leverages linkage disequilibrium through imputation. We test SEEKIN on a whole exome sequencing dataset (WES of Singapore Chinese and Malays, which involves substantial population structure and admixture. We show that SEEKIN can accurately estimate kinship coefficient and classify genetic relatedness using off-target sequencing data down sampled to ~0.15X depth. In application to the full WES dataset without down sampling, SEEKIN also outperforms existing methods by properly analyzing shallow off-target data (~0.75X. Using both simulated and real phenotypes, we further illustrate how our method improves estimation of trait heritability for WES studies.

Experimental research on friction coefficient between grain bulk and bamboo clappers

Science.gov (United States)

Tang, Gan; Sun, Ping; Zhao, Yanqi; Yin, Lingfeng; Zhuang, Hong

2017-12-01

A silo is an important piece of storage equipment, especially in the grain industry. The internal friction angle and the friction coefficient between the grain and the silo wall are the main parameters needed for calculating the lateral pressure of the silo wall. Bamboo is used in silo walls, but there are no provisions about the friction coefficient between bulk grain and bamboo clappers in existing codes. In this paper, the material of the silo wall is bamboo. The internal friction of five types of grain and the friction coefficient between the grain and the bamboo clappers were measured with an equal-strain direct shear apparatus. By comparing the experimental result values with the code values, the friction coefficient between the grain bulk and bamboo clappers is lower than that between grain and steel wall and that between grain and concrete wall. The differences in value are 0.21 and 0.09, respectively.

Changing organizational structures and management systems in coal industry with special consideration of the economic sphere. [Poland

Energy Technology Data Exchange (ETDEWEB)

Szaflik, J.

1985-01-01

Organizational models are analyzed for underground black coal mining in Poland from 1945 to 1984. From 1945 to 1949 organizational model of coal mining was based on selected solutions successfully tested in pre-war Poland. Coal mining was supervised by the Central Board of the Coal Industry. Coal mines were grouped in 8 and later in 10 mine associations. In 1949 the Central Board was dissolved and replaced by the Ministry of Mining and Power Generation. Role of Mine Associations was modified. Further changes were introduced in 1957. Power of Mine Associations in relation to individual coal mines increased. From 1972 to 1975 plans for a structural reform in the coal industry were developed but never realized. From 1980 to 1981 a program of structural changes in management of coal industry (in particular, underground coal mining) was developed. From 1982 to 1984 provisions of the economic reform in relation to coal mines were temporarily suspended. In 1984 a new organizational structure of the coal industry was introduced. The structure is similar to traditional structures used in previous decades (stronger position of mine associations, which since 1984 have been called Mine Unions, etc.). 9 references.

Analisis Loyalitas Pelanggan Industri Jasa Pengiriman Menggunakan Structural Equation Modeling

Directory of Open Access Journals (Sweden)

Sarika Zuhri

2017-01-01

Full Text Available Customer loyalty is important for both product and service industries. A loyal customer keeps using the company’s product and services. For a shipping service company, retaining existing customers in order to remain faithful will certainly be very crucial. This study was to determine relationship between variables affecting customer loyalty at PT. Pos Indonesia-Banda Aceh, a shipping service industry. The research used Structural Equation Modeling (SEM and with samples of 153 questionnaires obtained through a non-probability sampling technique. By using AMOS software, it can be concluded that the perceived quality does affect customer satisfaction, perceived value has influence on the customer satisfaction, the customer satisfaction is influential to trust and the trust itself has positive influence on customer loyalty.

Electron lucky-drift impact ionization coefficients of ZnS : Mn

Indian Academy of Sciences (India)

can also be used to calculate the impact ionization coefficients of high electron energy of. ZnS:Mn without ... Electroluminescent devices (ZnS:Mn) recently are of great interest in industry as well as in information technology [1–4]. Understanding .... data in the case of electron in ZnS from two sources, which were reported by.

Intensity of Competition and Market Structure in the Italian Banking Industry

NARCIS (Netherlands)

Giannetti, C.

2008-01-01

This work tests the predictions of Sutton’s model of independent submarkets for the Italian retail banking industry. In the first part of this paper, I develop a model of endogenous mergers to evidence the relationship between firms’ conduct, market entry and market structure. In the second part, I

Investigating Food and Beverage Industry Market Structure and Market Power Based on Leo and Bresnahan’s Approach

Directory of Open Access Journals (Sweden)

M. Nabishahikitash

2016-03-01

lower quantity of demand. The decrease in supply as a result of the exercise of market power creates an economic deadweight loss which is often viewed as socially undesirable. As a result, many countries have anti-trustor other legislation to limit the ability of firms to create market power. Such legislation often regulates mergers and sometimes introduces a judicial power to compel divestiture. A firm usually has market power by virtue of controlling a large portion of the market. In extreme cases—monopoly and monopsony—the firm controls the entire market. However, market size alone is not the only indicator of market power. Highly concentrated markets may be contestable if there are no barriers to entry or exit, limiting the incumbent firm's ability to raise its price above competitive levels. Market power gives firms the ability to engage in unilateral anti-competitive behavior.[1] Some of the behaviors that firms with market power are accused of engaging in include predatory pricing, product tying, and creation of overcapacity or other barriers to entry. If no individual participant in the market has significant market power, then anti-competitive behavior can take place only through collusion, or the exercise of a group of participants' collective market power. The Lerner index and Herfindahl index may be used to measure market power. Examination of market power of different industries provides possibility that policymakers design and deliver model for processing food and beverage producers to guide them to the product that has the most social benefits. Materials and Methods: The main purpose of this study is to assess and identify market structure and market power and estimate coefficient of collusion in the food and beverage industry. Estimates of market power in the food and beverage industry in Iran are few when compared with similar studies overseas. For local studies we can cite papers such as Alijani&Sabuhi (4, Sheikh zeinodin&Bakhshude (3

Assessment of Technogenic Accident Risk of Industrial Building Structures

Science.gov (United States)

Baiburin, D. A.; Baiburin, A. Kh

2017-11-01

A methodology for assessing the risk of an industrial building accident was developed taking into account the damage caused by various localization of collapse. Before the beginning of the survey of a facility technical condition, groups including the same type of building structures are selected. Further, assessment is made for the reduction in their load-carrying capacity from the strength and stability conditions taking into account defects. The characteristics of the influence of defects and structural damage on a building safety is the degree of compliance with the standards expressed by the reliability level. Reliability levels assignment is carried out on the basis of calculations, operating experience and inspection of a particular type of structure according to the formalized rules. The risk of collapse according to a separate scenario is calculated for structures that are capable and incapable of causing a progressive ossification. The results of the technique application are based on the analysis of the accident risk at the welding shop “Vysota (Height) 239” of the Chelyabinsk Pipe Rolling Plant.

Reconstruction of the spatial dependence of dielectric and geometrical properties of adhesively bonded structures

International Nuclear Information System (INIS)

Mackay, C; Hayward, D; Mulholland, A J; McKee, S; Pethrick, R A

2005-01-01

An inverse problem motivated by the nondestructive testing of adhesively bonded structures used in the aircraft industry is studied. Using transmission line theory, a model is developed which, when supplied with electrical and geometrical parameters, accurately predicts the reflection coefficient associated with such structures. Particular attention is paid to modelling the connection between the structures and the equipment used to measure the reflection coefficient. The inverse problem is then studied and an optimization approach employed to recover these electrical and geometrical parameters from experimentally obtained data. In particular the approach focuses on the recovery of spatially varying geometrical parameters as this is paramount to the successful reconstruction of electrical parameters. Reconstructions of structure geometry using this method are found to be in close agreement with experimental observations

Quantitative structure-property relationship study of n-octanol-water partition coefficients of some of diverse drugs using multiple linear regression

International Nuclear Information System (INIS)

Ghasemi, Jahanbakhsh; Saaidpour, Saadi

2007-01-01

A quantitative structure-property relationship (QSPR) study was performed to develop models those relate the structures of 150 drug organic compounds to their n-octanol-water partition coefficients (log P o/w ). Molecular descriptors derived solely from 3D structures of the molecular drugs. A genetic algorithm was also applied as a variable selection tool in QSPR analysis. The models were constructed using 110 molecules as training set, and predictive ability tested using 40 compounds. Modeling of log P o/w of these compounds as a function of the theoretically derived descriptors was established by multiple linear regression (MLR). Four descriptors for these compounds molecular volume (MV) (geometrical), hydrophilic-lipophilic balance (HLB) (constitutional), hydrogen bond forming ability (HB) (electronic) and polar surface area (PSA) (electrostatic) are taken as inputs for the model. The use of descriptors calculated only from molecular structure eliminates the need for experimental determination of properties for use in the correlation and allows for the estimation of log P o/w for molecules not yet synthesized. Application of the developed model to a testing set of 40 drug organic compounds demonstrates that the model is reliable with good predictive accuracy and simple formulation. The prediction results are in good agreement with the experimental value. The root mean square error of prediction (RMSEP) and square correlation coefficient (R 2 ) for MLR model were 0.22 and 0.99 for the prediction set log P o/w

Study on pore structure and diffusion coefficient of chloride ion in hardened low-alkaline cement

International Nuclear Information System (INIS)

Mihara, Morihiro; Torii, Kazuyuki

2009-03-01

Low-alkaline cement using pozzolans is under consideration as a possible filling and structural material in geological disposal for long-lived radioactive waste. Silica fume and fly ash are used to develop the low-alkaline cement which is named HFSC, High-volume Fly ash Silica fume Cement. In this study, pore structure and diffusivity of chloride ion in HFSC pastes were investigated in order to understand the fundamental transport properties of ions. HFSC which included different contents of fly ash (40%, 50% and 60%) with silica fume (20%) and ordinary Portland (OPC) cement were prepared. Hardened cement pastes were supplied to pore structure analysis and in-diffusion experiment with NaCl and CaCl 2 solution. Mercury intrusion method (MIP) commonly used and image analysis of backscattered electron microscopy (BSE) for pore in hardened cement paste were performed to investigate the pore structure. The porosity of HFSC was larger than that of OPC measured by MIP. However, pore diameter increasing pore volume of HFSC was smaller than that of OPC. It was observed that lager pores were in HFSC than in OPC from BSE. These large pores in HFSC were originated from cenosphere of FA. The apparent diffusivity of chloride in HFSC with fly ash of 40% showed smallest value in the cement pastes. It was concluded that the smallest diffusion coefficient was caused by a pore of HFSC which had a bended structure and ion exclusion/filtration effect. (author)

Relativistic quasiparticle band structures of Mg2Si, Mg2Ge, and Mg2Sn: Consistent parameterization and prediction of Seebeck coefficients

Science.gov (United States)

Shi, Guangsha; Kioupakis, Emmanouil

2018-02-01

We apply density functional and many-body perturbation theory calculations to consistently determine and parameterize the relativistic quasiparticle band structures of Mg2Si, Mg2Ge, and Mg2Sn, and predict the Seebeck coefficient as a function of doping and temperature. The quasiparticle band gaps, including spin-orbit coupling effects, are determined to be 0.728 eV, 0.555 eV, and 0.142 eV for Mg2Si, Mg2Ge, and Mg2Sn, respectively. The inclusion of the semicore electrons of Mg, Ge, and Sn in the valence is found to be important for the accurate determination of the band gaps of Mg2Ge and Mg2Sn. We also developed a Luttinger-Kohn Hamiltonian and determined a set of band parameters to model the near-edge relativistic quasiparticle band structure consistently for all three compounds that can be applied for thermoelectric device simulations. Our calculated values for the Seebeck coefficient of all three compounds are in good agreement with the available experimental data for a broad range of temperatures and carrier concentrations. Our results indicate that quasiparticle corrections are necessary for the accurate determination of Seebeck coefficients at high temperatures at which bipolar transport becomes important.

Structural reasons for vertical integration in the international oil industry

International Nuclear Information System (INIS)

Luciani, G.

1991-01-01

Once upon a time, the international oil industry was vertically integrated. A small group of companies controlled a very substantial share of international oil flows, extending their operations from the oil well to the gas pump, and relying on intracorporate transfers for most in-between transactions. The historical reasons for vertical disintegration, the market role, and structural reasons for vertical reintegration are examined. (author)

Temporal correlation coefficient for directed networks.

Science.gov (United States)

Büttner, Kathrin; Salau, Jennifer; Krieter, Joachim

2016-01-01

Previous studies dealing with network theory focused mainly on the static aggregation of edges over specific time window lengths. Thus, most of the dynamic information gets lost. To assess the quality of such a static aggregation the temporal correlation coefficient can be calculated. It measures the overall possibility for an edge to persist between two consecutive snapshots. Up to now, this measure is only defined for undirected networks. Therefore, we introduce the adaption of the temporal correlation coefficient to directed networks. This new methodology enables the distinction between ingoing and outgoing edges. Besides a small example network presenting the single calculation steps, we also calculated the proposed measurements for a real pig trade network to emphasize the importance of considering the edge direction. The farm types at the beginning of the pork supply chain showed clearly higher values for the outgoing temporal correlation coefficient compared to the farm types at the end of the pork supply chain. These farm types showed higher values for the ingoing temporal correlation coefficient. The temporal correlation coefficient is a valuable tool to understand the structural dynamics of these systems, as it assesses the consistency of the edge configuration. The adaption of this measure for directed networks may help to preserve meaningful additional information about the investigated network that might get lost if the edge directions are ignored.

Structural analysis of ceramic blocks sealing or structural incorporated with the industrial laundry sludge; Anllise estrutural de blocos ceramicos de vedacao ou estruturais incorporados com lodo de lavanderia industrial

Energy Technology Data Exchange (ETDEWEB)

Almeida, P.H.S.; Grippe, V.Y.Q.; Goulart, J.V., E-mail: phsoal@yahoo.com.br [Universidade Federal de Mato Grosso (UFMT), MT (Brazil)

2016-07-01

Industrial and commercial development of recent decades has led to an increase in waste generation. Thus, it is necessary to develop alternative and effective methods of treatment, replacing the simple disposal of these wastes in landfills. The objective of this work is to study the incorporation of textile industrial laundries sludge in ceramic blocks sealing or structural. Samples of ceramic blocks were produced using formulation with 20% sludge, the mass of ceramic clay. Structural analysis of the block was observed the tendency of most empty emergence (pores) during the firing of the blocks, as textile sludge was added in the ceramic paste composition. The mechanical testing of blocks compressive strength was above the minimum 3.0 MPa specified by the standard limit. The physical test water absorption of the blocks was within the range 8 to 22% specified by the standard. (author)

OPTIMIZATION OF EXPORT PORTFOLIO CURRENCY STRUCTURE OF INDUSTRIAL ENTERPRISES IN REPUBLIC OF BELARUS

Directory of Open Access Journals (Sweden)

K. A. Коrоbiyna

2009-01-01

Full Text Available Optimization of currency portfolio structure of export industrial enterprises in the Republic of Belarus, by which we shall understand a currency structure of export contracts of an international enterprise, is considered as one of the most important problems in the financial management of an enterprise. Statement and analysis of industrial enterprise alternative costs and simultaneous investigation of tendencies pertaining to changes in the exchange rates give the possibility (under other equal status to reduce non-systematic risks in foreign trade. Diversification of industrial enterprise currency portfolios with the purpose to decrease financial risks and with due account of exchange rate correlation can lead to an increase of payments in Russian currency and Eurocurrency under enterprise export contracts. The given changes decrease currency risks in the foreign trade however they entail possible increase of the export share of products to the Russian Federation in total export volume of the Republic of Belarus that increases dependence of the Republic of Belarus on the Russian Federation as the main foreign trade partner.

The changing structure of the electric power industry, 1970--1991

International Nuclear Information System (INIS)

1993-01-01

Section 205(a)(2) of the Department of Energy Organization Act of 1977 (Public Law 95--91) requires the Administrator of the Energy information Administration (EIA) to carry out a central, comprehensive, and unified energy data information program that will collect, evaluate, assemble, analyze, and disseminate data and information relevant to energy resources, reserves, production, demand, technology, and related economic and statistical information. To assist in meeting these responsibilities in the area of electric power, EIA has prepared this report, The Changing Structure of the Electric Power Industry, 1970--1991. The purpose of the this report is to provide a comprehensive overview of the ownership of the US electric power industry over the past two decades, with emphasis on the major changes that have occurred, their causes, and their effects

The Evolving Market Structure of the U.S. Residential Solar PV Installation Industry, 2000-2016

Energy Technology Data Exchange (ETDEWEB)

OShaughnessy, Eric J [National Renewable Energy Laboratory (NREL), Golden, CO (United States)

2018-02-22

Market structure refers to the number of firms and the distribution of market shares among firms within an industry. In The Evolving Market Structure of the U.S. Residential Solar PV Installation Industry, 2000-2016, we examine market structure in the context of residential solar PV. We find that over 8,000 companies have installed at least one residential PV system, with about 2,900 companies active in 2016. The majority of residential PV installers are relatively small companies, with about half of installers installing fewer than five systems. At the same time, a subset of high-volume installers accumulated market share, especially beginning around 2010 with the emergence of alternative customer financing options.

Coefficient of friction of a starved lubricated spur gear pair

International Nuclear Information System (INIS)

Liu, Huaiju; Zhu, Caichao; Sun, Zhangdong; Zhang, Yuanyuan; Song, Chaosheng

2016-01-01

The frictional power loss issue of gear pairs becomes an important concern in both industry and academia due to the requirement of the energy saving and the improvement of power density of gear drives. A thermal starved elastohydrodynamic lubrication model is developed to study the tribological performance of a spur gear pair under starved lubrication conditions. The contact pressure, the film thickness, the temperature rise, the frictional power loss, as well as the coefficient of friction are evaluated by considering the variation of the curvature radius, the sliding/rolling motion, and the load distribution of gear tooth within the meshing period. Effects of lubrication starvation condition, load and speed on the coefficient of friction are studied.

Industrial applications of refrigeration. Utilizing industries; Applications industrielles du froid. Industries utilisatrices

Energy Technology Data Exchange (ETDEWEB)

Marvillet, Ch. [Ecole Centrale de Lyon, 69 - Ecully (France); Groupement pour la Recherche sur les Echangeurs Thermiques, GRETh (France)

2001-10-01

Refrigeration is used in most of the industrial domains: food industry (conservation of the organoleptic properties and sanitary quality of products, control of fermentation, of juice concentration and of the dehydration of products), transformation industries (plastic industry, rubber industry, mechanical industry (fretting, hardening and surface treatment of materials, dehumidification of compressed air), liquefaction and purification of industrial gases and hydrocarbons, processing of wastes (removal of VOCs, purification of liquid effluents etc..), civil engineering (consolidation of soils, cooling of big concrete structures), leisure (skating rink, artificial snow). (J.S.)

Effective diffusion coefficients of 3H2O in several porous materials

International Nuclear Information System (INIS)

Terashima, Yutaka; Kumaki, Toru.

1976-01-01

Diffusion coefficients of radionuclides in some porous structural materials and porous components of earth stratum are important as the basis for the safety evaluation of the storage and disposal of radioactive wastes. In our previous works, the method of analysis and experiment using a permeative type diffusion cell for measurement of effective diffusion coefficient was established, and experimental results were reported. In this paper, effective diffusion coefficients of 3 H 2 O in mortar, concrete, brick, clay layer, and sand layer were measured, and characteristics of these pore structure were discussed on the basis of tourtusity factor. (auth.)

Black holes, information, and the universal coefficient theorem

Energy Technology Data Exchange (ETDEWEB)

Patrascu, Andrei T. [Department of Physics and Astronomy, University College London, London WC1E 6BT (United Kingdom)

2016-07-15

General relativity is based on the diffeomorphism covariant formulation of the laws of physics while quantum mechanics is based on the principle of unitary evolution. In this article, I provide a possible answer to the black hole information paradox by means of homological algebra and pairings generated by the universal coefficient theorem. The unitarity of processes involving black holes is restored by the demanding invariance of the laws of physics to the change of coefficient structures in cohomology.

Analysis of the importance of structural change in non-energy intensive industry for prospective modelling: The French case

International Nuclear Information System (INIS)

Seck, Gondia Sokhna; Guerassimoff, Gilles; Maïzi, Nadia

2016-01-01

A large number of studies have been conducted on the contribution of technological progress and structural change to the evolution of aggregate energy intensity in the industrial sector. However, no analyses have been done to examine theses changes in the non-energy intensive industry in France. We analyzed their importance in French industry with respect to their energy intensity, energy costs, value added, labour and the diffusion of production sites by using data at the 3-digit level with 236 sectors. Using a new decomposition method that gives no residual, this paper attempted to examine, over 10 years from 1996 to 2005, the changes that occurred in an area that has been neglected in energy analysis. We found that structural change had an overwhelming effect on the decline of aggregate energy intensity. Furthermore, we found that the higher the level of sector disaggregation, the more significant the changes that can be attributed to structural change, due to the homogeneity of this industrial group. The results of our study show that it is important to take into account the effects of structural change in “bottom-up” modelling exercises so as to improve the accuracy of energy demand forecasting for policy-makers and scientists. - Highlights: • Defining NEI industries with a quantitative approach from relevant indicators in France. • Developing new decomposition method given in additive form with no residual in NEI. • Structural change is the overwhelming factor in improving energy performance within NEI. • Revealed consistent trend with level of sector disaggregation if homogeneous industries.

An empirical investigation of governance structures in the hotel industry

OpenAIRE

Dahlstrom, Robert; Haugland, Sven Arne; Nygaard, Arne; Rokkan, Aksel Ivar

2002-01-01

The study investigates alternative governance forms in the hotel industry. We analyze the choice among independently owned firms, voluntary chains, franchising, and vertically integrated chains. Based on agency theory, we argue that the need for control over service quality, financial risk, and the market environment affect the choice of governance form. Prior agency research emphasizes alternative governance structures employed by principals given local market conditions, agent incentives, a...

Effect on industry structure by fossil fuel burden

Energy Technology Data Exchange (ETDEWEB)

Kang, Yoon Young [Korea Energy Economics Institute, Euiwang (Korea)

1999-12-01

Multi-industrial sector dynamic operation general equilibrium model of Korean economy has been developed. It is able to analyze carbon dioxide emission, energy use and macro economy, and reciprocal actions between each industrial sector and to measure economic effects by environmental policy for the purpose of reducing carbon dioxide. Using this model, it analyzed its effect on industries in Korea of limiting carbon dioxide emission by experimenting each policy instrument, policy object, application of tax revenue for limiting carbon dioxide. The spreading effect on each industry has a large difference for each industry. The production reduction of energy industry or large energy consuming industry (basic chemical industry, transportation and storage, steel industry, construction) shows relatively huge to other industries. Production reduction for each industry, i.e. a wide difference of economic burden between industries, will need some consideration when introducing energy carbon tax, especially in the initial stage, since it could cause an equity problem between industries. Moreover, studies on differentiating tax rate, tax return and exemption that can mitigate an equity problem between industries should be implemented. (author). 66 refs., 22 figs., 12 tabs.

The Russian oil industry re-structuration: towards the emergence of western type enterprises?

Energy Technology Data Exchange (ETDEWEB)

Locatelli, C

1999-01-01

The Russian oil industry has undergone fundamental changes since the collapse of the Soviet Empire and its bureaucratic administrative structure, dominated by its various Branch Ministries. The monopoly in the Soviet oil industry has now been replaced by a number of ''oil companies'', some of which are very powerful, the best known of them being Lukoil. These ''joint stock companies'' are the product of a reform aimed essentially at implanting, out of all the numerous organisational arrangements developed in the West, the model of the vertically integrated private firm. Beyond the legal reforms in the Russian oil industry sector, however, the nature of the organisational model that has actually emerged in Russia begs several questions. Many entities, which are complex and highly diversified, are involved in this industry. There are, of course, the many private structures in which the banks sometimes carry a considerable amount of weight. There are also some vertically integrated organisations, but the degree of integration is variable and their method of centralization is based on a specific form of economic logic. It should not be considered, however, that these actors are similar to capitalist-type private enterprises, whose behaviour is regulated by the demands of international competition. Reform of property rights has not been sufficient to create true private enterprise in Russia. (author)

The Russian oil industry re-structuration: towards the emergence of western type enterprises?

International Nuclear Information System (INIS)

Locatelli, C.

1999-01-01

The Russian oil industry has undergone fundamental changes since the collapse of the Soviet Empire and its bureaucratic administrative structure, dominated by its various Branch Ministries. The monopoly in the Soviet oil industry has now been replaced by a number of ''oil companies'', some of which are very powerful, the best known of them being Lukoil. These ''joint stock companies'' are the product of a reform aimed essentially at implanting, out of all the numerous organisational arrangements developed in the West, the model of the vertically integrated private firm. Beyond the legal reforms in the Russian oil industry sector, however, the nature of the organisational model that has actually emerged in Russia begs several questions. Many entities, which are complex and highly diversified, are involved in this industry. There are, of course, the many private structures in which the banks sometimes carry a considerable amount of weight. There are also some vertically integrated organisations, but the degree of integration is variable and their method of centralization is based on a specific form of economic logic. It should not be considered, however, that these actors are similar to capitalist-type private enterprises, whose behaviour is regulated by the demands of international competition. Reform of property rights has not been sufficient to create true private enterprise in Russia. (author)

Transient power coefficients for a two-blade Savonius wind turbine

Energy Technology Data Exchange (ETDEWEB)

Pope, K.; Naterer, G. [Univ. of Ontario Inst. of Technology, Oshawa, ON (Canada). Faculty of Engineering and Applied Science

2010-07-01

The wind power industry had a 29 percent growth rate in installed capacity in 2008, and technological advances are helping to speed up growth by significantly increasing wind turbine power yields. While the majority of the industry's growth has come from large horizontal axis wind turbine installations, small wind turbines can also be used in a wide variety of applications. This study predicted the transient power coefficient for a Savonius vertical axis wind turbine (VAWT) wind turbine with 2 blades. The turbine's flow field was used to analyze pressure distribution along the rotor blades in relation to the momentum, lift, and drag forces on the rotor surfaces. The integral force balance was used to predict the transient torque and power output of the turbine. The study examined the implications of the addition of a second blade on the model's ability to predict transient power outputs. Computational fluid dynamics (CFD) programs were used to verify that the formulation can be used to accurately predict the transient power coefficients of VAWTs with Savonius blades. 11 refs., 1 tab., 6 figs.

Product Differentiation and Industrial Structure.

OpenAIRE

Shaked, Avner; Sutton, John

1987-01-01

Some recent literature on "vertical product differentiation" has d eveloped the idea that if the nature of technology and tastes in some industry take a certain form, then the industry must necessarily be "concentrated" and must remain so, no matter how large the economy becomes. The present paper develops this idea further and looks at so me of its implications. This approach offers a simple unified framewo rk within which to reexplore many issues that arise in considering th e relationship ...

Absorption coefficient and relative refractive index change for a double δ-doped GaAs MIGFET-like structure: Electric and magnetic field effects

Science.gov (United States)

Martínez-Orozco, J. C.; Rodríguez-Magdaleno, K. A.; Suárez-López, J. R.; Duque, C. A.; Restrepo, R. L.

2016-04-01

In this work we present theoretical results for the electronic structure as well as for the absorption coefficient and relative refractive index change for an asymmetric double δ-doped like confining potential in the active region of a Multiple Independent Gate Field Effect Transistor (MIGFET) system. We model the potential profile as a double δ-doped like potential profile between two Schottky (parabolic) potential barriers that are just the main characteristics of the MIGFET configuration. We investigate the effect of external electromagnetic fields in this kind of quantum structures, in particular we applied a homogeneous constant electric field in the growth direction z as well as a homogeneous constant magnetic field in the x-direction. In general we conclude that by applying electromagnetic fields we can modulate the resonant peaks of the absorption coefficient as well as their energy position. Also with such probes it is possible to control the nodes and amplitude of the relative refractive index changes related to resonant intersubband optical transitions.

Non-Price Competition and the Structure of the Online Information Industry: Q-Analysis of Medical Databases and Hosts.

Science.gov (United States)

Davies, Roy

1987-01-01

Discussion of the online information industry emphasizes the effects of non-price competition on its structure and the firms involved. Q-analysis is applied to data on medical databases and hosts, changes over a three-year period are identified, and an optimum structure for the industry based on economic theory is considered. (Author/LRW)

Structural fire resistance experimental research priority needs of U.S. industry

CERN Document Server

Almand, Kathleen H

2012-01-01

Structural Fire Resistance Experimental Research – Priority Needs of U.S. Industry provides a synthesis of stakeholder input to a prioritized agenda for research at the National Fire Research Laboratory (NFRL) at the National Institute of Standards and Technology (NIST) designed to accelerate the implementation of performance-based fire engineering for structures. The NFRL presents a broad range of unanswered questions regarding the performance of real structures in fire conditions, and informs performance-based design methods and standards in this field. The authors conducted a comprehensive literature review of large-scale structural fire testing and compiled research needs from a variety of sources. The book addresses major issues of broad concern in the fire community, such as real fire exposure and structural response, composite floor system performance, enhancing modeling performance, and understanding the embedded safety features in design methods. It concludes with a prioritized set of research reco...

Determination of re-aeration coefficients on high mountain rivers using nuclear techniques

International Nuclear Information System (INIS)

Fajardo, Marco

2001-01-01

The rivers Machangara and Guayllabamba in Quito, Ecuador, currently are highly polluted, mainly due to human and industrial residues from the city. The objective of this survey is to establish the dynamics of dissolved oxygen in these rivers using the Krypton 85 method to determine the re aeration coefficient in representative sectors of the rivers. In addition, conventional test tracers establish mean flow speed and flow longitudinal dispersion coefficients. The results of this study will be useful for future water quality modelling of these rivers, in order to define their behaviour and auto depurative capacity to treat sludge waters from Quito

Trade, Industry Structure and Different Sources of Firm-heterogeneity

DEFF Research Database (Denmark)

Schröder, Philipp J.H.; Jørgensen, Jan Guldager

Recently the workhorse model of intra-industry trade has been augmented with heterogeneous cost structures at the firm level. In principle there exist various sources of heterogeneity, yet the literature appears -- for convenience or other reasons -- to settle on marginal cost heterogeneity...... as the preferred modelling device. The present paper develops a unified model framework allowing a systematic comparison of marginal and fixed cost heterogeneity. We find that both types of heterogeneity are in fact able to capture the central stylized facts of international trade. For example can either source...

Optimization of process for creating porous structure of materials from industrial waste

International Nuclear Information System (INIS)

Mangutova-Stoilkovska, Bianka

2005-01-01

Republic of Macedonia, as many European countries, possesses great quantities of industrial waste materials from thermo electrical power stations and metallurgical capacities. The powder from waste fly ash and metallurgical slag was specified from chemical, geometrical, structural and thermochemical aspects. After the consolidation, the compacts were specified from structural, mechanical and thermophysical aspects. Using three kinds of waste glasses (TV glass, window and flask), the sintering temperature was significantly reduced and ecologically risky components were fixed molecularly in the matrix based on fly ash and metallurgical slag. The glass was characterized from chemical, geometrical and thermophysical point of view. The amount of glass in the composites varied from 10%-50%. The mechanical and thermal expansion properties of the sintered compacts, in the temperature region from 800 o -1200 o C were determined. The thermodynamic stability, mechanical properties and chemical inertness have been used as criterion for selection of the consolidated compacts. Special attention was given to the creation of highly porous structure. For the purpose to obtain a high joint porous structure, several types of porosity have been used: polyurethane foam, hydrogen peroxide, limestone, carbon ash and carbon fibres. The obtained glass-ceramic materials could be used in the building industry, for making filters for gases and liquids as well as diffusers for waste water aeration. (Author)

PZT/PLZT - elastomer composites with improved piezoelectric voltage coefficient

Science.gov (United States)

Harikrishnan, K.; Bavbande, D. V.; Mohan, Dhirendra; Manoharan, B.; Prasad, M. R. S.; Kalyanakrishnan, G.

2018-02-01

Lead Zirconate Titanate (PZT) and Lanthanum-modified Lead Zirconate Titanate (PLZT) ceramic sensor materials are widely used because of their excellent piezoelectric coefficients. These materials are brittle, high density and have low achievable piezoelectric voltage coefficients. The density of the sintered ceramics shall be reduced by burnable polymeric sponge method. The achievable porosity level in this case is nearly 60 - 90%. However, the porous ceramic structure with 3-3 connectivity produced by this method is very fragile in nature. The strength of the porous structure is improved with Sylgard®-184 (silicone elastomer) by vacuum impregnation method maintaining the dynamic vacuum level in the range of -650 mm Hg. The elastomer Sylgard®-184 is having low density, low dielectric constant and high compliance (as a resultant stiffness of the composites is increased). To obtain a net dipole moment, the impregnated ceramic composites were subjected to poling treatment with varying conditions of D.C. field and temperature. The properties of the poled PZT/PLZT - elastomer composites were characterized with LCR meter for measuring the dielectric constant values (k), d33 meter used for measuring piezo-electric charge coefficient values (d33) and piezo-electric voltage coefficient (g33) values which were derived from d33 values. The voltage coefficient (g33) values of these composites are increased by 10 fold as compared to the conventional solid ceramics demonstrates that it is possible to fabricate a conformable detector.

Studies on absorption coefficient near edge of multi elements

International Nuclear Information System (INIS)

Eisa, M.H.; Shen, H.; Yao, H.Y.; Mi, Y.; Zhou, Z.Y.; Hu, T.D.; Xie, Y.N.

2005-01-01

X-ray absorption near edge structure (XANES) was used to study the near edge mass-absorption coefficients of seven elements, such as, Ti, V, Fe, Co, Ni, Cu and Zn. It is well known that, on the near edge absorption of element, when incident X-ray a few eV change can make the absorption coefficient an order magnitude alteration. So that, there are only a few points mass-absorption coefficient at the near edge absorption and that always average value in published table. Our results showed a wide range of data, the total measured data of mass-absorption coefficient of the seven elements was about 505. The investigation confirmed that XANES is useful technique for multi-element absorption coefficient measurement. Details of experimental methods and results are given and discussed. The experimental work has been performed at Beijing Synchrotron Radiation Facility. The measured values were compared with the published data. Good agreement between experimental results and published data is obtained

Studies on absorption coefficient near edge of multi elements

Science.gov (United States)

Eisa, M. H.; Shen, H.; Yao, H. Y.; Mi, Y.; Zhou, Z. Y.; Hu, T. D.; Xie, Y. N.

2005-12-01

X-ray absorption near edge structure (XANES) was used to study the near edge mass-absorption coefficients of seven elements, such as, Ti, V, Fe, Co, Ni, Cu and Zn. It is well known that, on the near edge absorption of element, when incident X-ray a few eV change can make the absorption coefficient an order magnitude alteration. So that, there are only a few points mass-absorption coefficient at the near edge absorption and that always average value in published table. Our results showed a wide range of data, the total measured data of mass-absorption coefficient of the seven elements was about 505. The investigation confirmed that XANES is useful technique for multi-element absorption coefficient measurement. Details of experimental methods and results are given and discussed. The experimental work has been performed at Beijing Synchrotron Radiation Facility. The measured values were compared with the published data. Good agreement between experimental results and published data is obtained.

The changing structure of the US coal industry: An update, July 1993

Energy Technology Data Exchange (ETDEWEB)

1993-07-29

Section 205(a)(2) of the Department of Energy Organization Act of 1977 requires the Administrator of the Energy Information Administration (EIA) to carry out a central, comprehensive, and unified energy data and information program that will collect, evaluate, assemble, analyze, and disseminate data and information relevant to energy resources, reserves, production, demand, technology, and related economic and statistical information. The purpose of this report is to provide a comprehensive overview of changes in the structure of the US coal industry between 1976 and 1991. The structural elements examined include the number of mines, average mine size, the size distribution of mines, and the size distribution of coal firms. The report measures changes in the market shares of the largest coal producers at the national level and in various regions. The Central Appalachian low-sulfur coal market is given special attention, and the market for coal reserves is examined. A history of mergers in the coal industry is presented, and changes in the proportions of US coal output that are produced by various types of companies, including foreign-controlled firms, are described. Finally, the impact of post-1991 mergers on the structure of the industry is estimated. The legislation that created the EIA vested the organization with an element of statutory independence. The EIA does not take positions on policy questions. The EIA`s responsibility is to provide timely, high-quality information and to perform objective, credible analyses in support of deliberations by both public and private decisionmakers. Accordingly, this report does not purport to represent the policy positions of the US Department of Energy or the Administration.

The changing structure of the US coal industry: An update, July 1993

International Nuclear Information System (INIS)

1993-01-01

Section 205(a)(2) of the Department of Energy Organization Act of 1977 requires the Administrator of the Energy Information Administration (EIA) to carry out a central, comprehensive, and unified energy data and information program that will collect, evaluate, assemble, analyze, and disseminate data and information relevant to energy resources, reserves, production, demand, technology, and related economic and statistical information. The purpose of this report is to provide a comprehensive overview of changes in the structure of the US coal industry between 1976 and 1991. The structural elements examined include the number of mines, average mine size, the size distribution of mines, and the size distribution of coal firms. The report measures changes in the market shares of the largest coal producers at the national level and in various regions. The Central Appalachian low-sulfur coal market is given special attention, and the market for coal reserves is examined. A history of mergers in the coal industry is presented, and changes in the proportions of US coal output that are produced by various types of companies, including foreign-controlled firms, are described. Finally, the impact of post-1991 mergers on the structure of the industry is estimated. The legislation that created the EIA vested the organization with an element of statutory independence. The EIA does not take positions on policy questions. The EIA's responsibility is to provide timely, high-quality information and to perform objective, credible analyses in support of deliberations by both public and private decisionmakers. Accordingly, this report does not purport to represent the policy positions of the US Department of Energy or the Administration

Object detection by correlation coefficients using azimuthally averaged reference projections.

Science.gov (United States)

Nicholson, William V

2004-11-01

A method of computing correlation coefficients for object detection that takes advantage of using azimuthally averaged reference projections is described and compared with two alternative methods-computing a cross-correlation function or a local correlation coefficient versus the azimuthally averaged reference projections. Two examples of an application from structural biology involving the detection of projection views of biological macromolecules in electron micrographs are discussed. It is found that a novel approach to computing a local correlation coefficient versus azimuthally averaged reference projections, using a rotational correlation coefficient, outperforms using a cross-correlation function and a local correlation coefficient in object detection from simulated images with a range of levels of simulated additive noise. The three approaches perform similarly in detecting macromolecular views in electron microscope images of a globular macrolecular complex (the ribosome). The rotational correlation coefficient outperforms the other methods in detection of keyhole limpet hemocyanin macromolecular views in electron micrographs.

STRUCTURAL ALTERNATIVES OF RUSSIAN MANUFACTURING INDUSTRIES AND ARCHITECTURE OF TECHNOLOGICAL MODERNIZATION. PART 1

Directory of Open Access Journals (Sweden)

Izryadnova O. I.

2014-06-01

Full Text Available Continuing stagnation in the Russian economy makes a compelling case for structural reforms and transition to new technologies in non-financial sector. Given the backdrop of investor choice to wait out the situation and pause their investments, stagnation threatens to remain for longer. The biggest concerns are related to the slowdown in the range of high-tech non-resource manufacturing industries. These industries should become the cornerstone to foster the development of scientific, technical, and innovative potential of the country, overcoming the technical deficit, and implementation of modern technologies of the sixth technological generation. The article assesses the place and role of manufacturing industries in Russia’s economy and presents an analysis of dynamic shifts in their structure during the business cycle. The article demonstrates the results of empirical study of monitoring of innovative receptiveness of manufacturing industries. We discuss the directions of expanded cooperation between business and state. We also outline opportunities for correcting policies and tools directed at activating innovative functioning of the manufacturing sector in the view of the growth of geopolitical tensions, forms and methods of effective institutional management of the modernization of business units. It appears that the issues of investment maneuver to single out some types of economic activities, which manufacture products and services with high added value and increasing competitiveness of the Russian economy, call for the change in the model of economic development.

STRUCTURAL ALTERNATIVES OF RUSSIAN MANUFACTURING INDUSTRIES AND ARCHITECTURE OF TECHNOLOGICAL MODERNIZATION. PART 2

Directory of Open Access Journals (Sweden)

Izryadnova O. I.

2014-09-01

Full Text Available Continuing stagnation in the Russian economy makes a compelling case for structural reforms and transition to new technologies in non-financial sector. Given the backdrop of investor choice to wait out the situation and pause their investments, stagnation threatens to remain for longer. The biggest concerns are related to the slowdown in the range of high-tech non-resource manufacturing industries. These industries should become the cornerstone to foster the development of scientific, technical, and innovative potential of the country, overcoming the technical deficit, and implementation of modern technologies of the sixth technological generation. The article assesses the place and role of manufacturing industries in Russia’s economy and presents an analysis of dynamic shifts in their structure during the business cycle. The article demonstrates the results of empirical study of monitoring of innovative receptiveness of manufacturing industries. We discuss the directions of expanded cooperation between business and state. We also outline opportunities for correcting policies and tools directed at activating innovative functioning of the manufacturing sector in the view of the growth of geopolitical tensions, forms and methods of effective institutional management of the modernization of business units. It appears that the issues of investment maneuver to single out some types of economic activities, which manufacture products and services with high added value and increasing competitiveness of the Russian economy, call for the change in the model of economic development.

Explicit solutions of two nonlinear dispersive equations with variable coefficients

International Nuclear Information System (INIS)

Lai Shaoyong; Lv Xiumei; Wu Yonghong

2008-01-01

A mathematical technique based on an auxiliary equation and the symbolic computation system Matlab is developed to construct the exact solutions for a generalized Camassa-Holm equation and a nonlinear dispersive equation with variable coefficients. It is shown that the variable coefficients of the derivative terms in the equations cause the qualitative change in the physical structures of the solutions

Industry structures in private dental markets in Finland.

Science.gov (United States)

Widström, E; Mikkola, H

2012-12-01

To use industrial organisation and organisational ecology research methods to survey industry structures and performance in the markets for private dental services and the effect of competition. Data on practice characteristics, performance, and perceived competition were collected from full-time private dentists (n = 1,121) using a questionnaire. The response rate was 59.6%. Cluster analysis was used to identify practice type based on service differentiation and process integration variables formulated from the questionnaire. Four strategic groups were identified in the Finnish markets: Solo practices formed one distinct group and group practices were classified into three clusters Integrated practices, Small practices, and Loosely integrated practices. Statistically significant differences were found in performance and perceived competitiveness between the groups. Integrated practices with the highest level of process integration and service differentiation performed better than solo and small practices. Moreover, loosely integrated and small practices outperformed solo practises. Competitive intensity was highest among small practices which had a low level of service differentiation and was above average among solo practises. Private dental care providers that had differentiated their services from public services and that had a high number of integrated service production processes enjoyed higher performance and less competitive pressures than those who had not.

General Influence Coefficient Algorithm in Balancing of Rotating Machinery

Directory of Open Access Journals (Sweden)

Xiaoping Yu

2004-01-01

Full Text Available The General Influence Coefficient Algorithm (GICA, developed in this article, is a new calculation method for Influence Coefficients (ICs with a general formula. Compared to the traditional calculation method, GICA can solve the ICs' calculation task when the group of trial weights are installed on the rotor each time, the trial weights are retained on the rotor systems, or there is redundant trial balancing data, when even part of the ICs is known. GICA is also a powerful tool for refining the ICs from redundant balancing data or historical balancing data and serves as a general algorithm. With the general matrix formula, GICA is ready to be applied in a computer-aided balancing system as the key part of calculation software. Examples in industry are also presented to demonstrate the aplication of this new algorithm.

Minimum wall pressure coefficient of orifice plate energy dissipater

Directory of Open Access Journals (Sweden)

Wan-zheng Ai

2015-01-01

Full Text Available Orifice plate energy dissipaters have been successfully used in large-scale hydropower projects due to their simple structure, convenient construction procedure, and high energy dissipation ratio. The minimum wall pressure coefficient of an orifice plate can indirectly reflect its cavitation characteristics: the lower the minimum wall pressure coefficient is, the better the ability of the orifice plate to resist cavitation damage is. Thus, it is important to study the minimum wall pressure coefficient of the orifice plate. In this study, this coefficient and related parameters, such as the contraction ratio, defined as the ratio of the orifice plate diameter to the flood-discharging tunnel diameter; the relative thickness, defined as the ratio of the orifice plate thickness to the tunnel diameter; and the Reynolds number of the flow through the orifice plate, were theoretically analyzed, and their relationships were obtained through physical model experiments. It can be concluded that the minimum wall pressure coefficient is mainly dominated by the contraction ratio and relative thickness. The lower the contraction ratio and relative thickness are, the larger the minimum wall pressure coefficient is. The effects of the Reynolds number on the minimum wall pressure coefficient can be neglected when it is larger than 105. An empirical expression was presented to calculate the minimum wall pressure coefficient in this study.

Structures of mobilization and resistance: Confronting the oil and gas industries in Russia

NARCIS (Netherlands)

Pierk, Simone; Tysyachnyouk, M.

2016-01-01

Drawing on recent developments in the problematic relationship between the oil industry and local communities in the Republic of Komi, we develop a case study of environmental grassroots mobilization in northwest Russia. Using a qualitative methodology comprising semi-structured interviews and

The Impact of the Defense Industry Consolidation on the Aerospace Industry

National Research Council Canada - National Science Library

Davis, Judy B

2006-01-01

... (SIC) codes. Using the structure-conduct- performance paradigm, a method in industrial organization, this thesis focused on how the defense consolidation affected the structure and behavior of the aerospace industry...

Education, Skills and Industrial Development in the Structural Transformation of Africa. Innocenti Occasional Papers Number 3. Special Subseries: Structural Adjustment in Sub-Saharan Africa.

Science.gov (United States)

Lall, Sanjaya

Industrial expansion remains essential for the development and structural transformation of most sub-Saharan African economies. The advantages of industrialization go beyond the provision of manufactured goods and the diversification of exports to the modernization of society. Growth rates in formal manufacturing tell little about the economic…

Adaptive Finite Element Methods for Elliptic Problems with Discontinuous Coefficients

KAUST Repository

Bonito, Andrea; DeVore, Ronald A.; Nochetto, Ricardo H.

2013-01-01

Elliptic PDEs with discontinuous diffusion coefficients occur in application domains such as diffusions through porous media, electromagnetic field propagation on heterogeneous media, and diffusion processes on rough surfaces. The standard approach to numerically treating such problems using finite element methods is to assume that the discontinuities lie on the boundaries of the cells in the initial triangulation. However, this does not match applications where discontinuities occur on curves, surfaces, or manifolds, and could even be unknown beforehand. One of the obstacles to treating such discontinuity problems is that the usual perturbation theory for elliptic PDEs assumes bounds for the distortion of the coefficients in the L∞ norm and this in turn requires that the discontinuities are matched exactly when the coefficients are approximated. We present a new approach based on distortion of the coefficients in an Lq norm with q < ∞ which therefore does not require the exact matching of the discontinuities. We then use this new distortion theory to formulate new adaptive finite element methods (AFEMs) for such discontinuity problems. We show that such AFEMs are optimal in the sense of distortion versus number of computations, and report insightful numerical results supporting our analysis. © 2013 Societ y for Industrial and Applied Mathematics.

Fractal diffusion coefficient from dynamical zeta functions

Energy Technology Data Exchange (ETDEWEB)

Cristadoro, Giampaolo [Max Planck Institute for the Physics of Complex Systems, Noethnitzer Str. 38, D 01187 Dresden (Germany)

2006-03-10

Dynamical zeta functions provide a powerful method to analyse low-dimensional dynamical systems when the underlying symbolic dynamics is under control. On the other hand, even simple one-dimensional maps can show an intricate structure of the grammar rules that may lead to a non-smooth dependence of global observables on parameters changes. A paradigmatic example is the fractal diffusion coefficient arising in a simple piecewise linear one-dimensional map of the real line. Using the Baladi-Ruelle generalization of the Milnor-Thurnston kneading determinant, we provide the exact dynamical zeta function for such a map and compute the diffusion coefficient from its smallest zero. (letter to the editor)

Fractal diffusion coefficient from dynamical zeta functions

International Nuclear Information System (INIS)

Cristadoro, Giampaolo

2006-01-01

Dynamical zeta functions provide a powerful method to analyse low-dimensional dynamical systems when the underlying symbolic dynamics is under control. On the other hand, even simple one-dimensional maps can show an intricate structure of the grammar rules that may lead to a non-smooth dependence of global observables on parameters changes. A paradigmatic example is the fractal diffusion coefficient arising in a simple piecewise linear one-dimensional map of the real line. Using the Baladi-Ruelle generalization of the Milnor-Thurnston kneading determinant, we provide the exact dynamical zeta function for such a map and compute the diffusion coefficient from its smallest zero. (letter to the editor)

ANL results for LMFR reactivity coefficients benchmark

International Nuclear Information System (INIS)

Hill, Robert

2000-01-01

The fast reactor analysis methods developed at ANL were extensively tested in ZPR and ZPPR experiments, applied to EBR-2 and FFTF test reactors. The basic nuclear data library used was ENDF/B-V.2 with the ETOE-2 data processing code and the ENDF/B-VI. Multigroup constants were generated by Monte Carlo code MCNP 2 -2. Neutron flux calculation were done by DIF3D code applying neutron diffusion theory and finite difference method. The results obtained include basic parameters; fuel and structure regional Doppler coefficients; geometry expansion fuel coefficients; kinetics parameters. In general, agreement between phase 1 and 2 results were excellent

Spesialisasi Industri Auditor Sebagai Prediktor Earnings Response Coefficient Perusahaan Publik yang Terdaftar di Bursa Efek Indonesia

Directory of Open Access Journals (Sweden)

Hans Hananto Andreas

2012-01-01

Full Text Available This study investigates the effect of auditor’s industry specialisation on the ERC of public companies listed on the BEI in the period of 2006-2010. The purpose of this study is to examine the relationship between audit quality as proxied by auditor’s industry specialisation and the earnings information quality as measured by ERC. Hypothesis testing was conducted using multiple linear regression technique. Using purposive sampling technique, 134 public companies listed on the BEI were selected as the sample of this study. This study finds that there is a positive relationship between auditor’s industry specialisation and company’s ERC. The ERC of companies that use auditors with industry specialisation is higher than ERC of companies that do not use auditors with industry specialisation.

Measurement of Dynamic Friction Coefficient on the Irregular Free Surface

International Nuclear Information System (INIS)

Yeom, S. H.; Seo, K. S.; Lee, J. H.; Lee, K. H.

2007-01-01

A spent fuel storage cask must be estimated for a structural integrity when an earthquake occurs because it freely stands on ground surface without a restriction condition. Usually the integrity estimation for a seismic load is performed by a FEM analysis, the friction coefficient for a standing surface is an important parameter in seismic analysis when a sliding happens. When a storage cask is placed on an irregular ground surface, measuring a friction coefficient of an irregular surface is very difficult because the friction coefficient is affected by the surface condition. In this research, dynamic friction coefficients on the irregular surfaces between a concrete cylinder block and a flat concrete slab are measured with two methods by one direction actuator

Market size and vertical structure in the rail way industry

OpenAIRE

Matsushima, Noriaki; Mizutani, Fumitoshi

2011-01-01

We provide a theoretical framework to discuss the relation between market size and vertical structure in the railway industry. The framework is based on a simple downstream monopoly model with two input suppliers, labor forces and the rail infrastructure firm. The operation of the downstream firm (i.e., the train operating firm) generates costs on the rail infrastructure firm. We show that the downstream firm with a larger market size is more likely to integrate with the rail infrastructure f...

Exact solutions to a nonlinear dispersive model with variable coefficients

International Nuclear Information System (INIS)

Yin Jun; Lai Shaoyong; Qing Yin

2009-01-01

A mathematical technique based on an auxiliary differential equation and the symbolic computation system Maple is employed to investigate a prototypical and nonlinear K(n, n) equation with variable coefficients. The exact solutions to the equation are constructed analytically under various circumstances. It is shown that the variable coefficients and the exponent appearing in the equation determine the quantitative change in the physical structures of the solutions.

Introduction and application of the multiscale coefficient of variation analysis.

Science.gov (United States)

Abney, Drew H; Kello, Christopher T; Balasubramaniam, Ramesh

2017-10-01

Quantifying how patterns of behavior relate across multiple levels of measurement typically requires long time series for reliable parameter estimation. We describe a novel analysis that estimates patterns of variability across multiple scales of analysis suitable for time series of short duration. The multiscale coefficient of variation (MSCV) measures the distance between local coefficient of variation estimates within particular time windows and the overall coefficient of variation across all time samples. We first describe the MSCV analysis and provide an example analytical protocol with corresponding MATLAB implementation and code. Next, we present a simulation study testing the new analysis using time series generated by ARFIMA models that span white noise, short-term and long-term correlations. The MSCV analysis was observed to be sensitive to specific parameters of ARFIMA models varying in the type of temporal structure and time series length. We then apply the MSCV analysis to short time series of speech phrases and musical themes to show commonalities in multiscale structure. The simulation and application studies provide evidence that the MSCV analysis can discriminate between time series varying in multiscale structure and length.

On the low-field Hall coefficient of graphite

Directory of Open Access Journals (Sweden)

P. Esquinazi

2014-11-01

Full Text Available We have measured the temperature and magnetic field dependence of the Hall coefficient (RH in three, several micrometer long multigraphene samples of thickness between ∼9 to ∼30 nm in the temperature range 0.1 to 200 K and up to 0.2 T field. The temperature dependence of the longitudinal resistance of two of the samples indicates the contribution from embedded interfaces running parallel to the graphene layers. At low enough temperatures and fields RH is positive in all samples, showing a crossover to negative values at high enough fields and/or temperatures in samples with interfaces contribution. The overall results are compatible with the reported superconducting behavior of embedded interfaces in the graphite structure and indicate that the negative low magnetic field Hall coefficient is not intrinsic of the ideal graphite structure.

Structuring Requirements in a Multi-Project Environment in the Construction Industry

DEFF Research Database (Denmark)

Wörösch, Michael

2012-01-01

Being in control of requirements in building projects is vital, since it helps securing the often small profit margins and the reputation of the responsible company. Hence this research aims to introduce requirements management to the construction industry. By means of case study and action...... in this industry, yet, success is here defined as an accomplished and accepted implementation of requirements management processes that are used by the relevant project members in their daily work and where the benefits of implementing requirements management outweighs the cost of invested resources. Furthermore...... it is argued that when running technology development, product development, product platform development, and a portfolio of building projects at the same time the use of requirements management is advantageous and an intelligent way of structuring requirements is needed. This article also demonstrates...

Estimation of Water Diffusion Coefficient into Polycarbonate at Different Temperatures Using Numerical Simulation

DEFF Research Database (Denmark)

Shojaee Nasirabadi, Parizad; Jabbaribehnam, Mirmasoud; Hattel, Jesper Henri

2016-01-01

) is widely used in the electronics industry. Thus, in this work the water diffusion coefficient into PC is investigated. Furthermore, numerical methods used for estimation of the diffusion coefficient and their assumptions are discussed. 1D and 3D numerical solutions are compared and based on this, itis......Nowadays, many electronic systems are exposed to harsh conditions of relative humidity and temperature. Masstransport properties of electronic packaging materials are needed in order to investigate the influence of moisture andtemperature on reliability of electronic devices. Polycarbonate (PC...... shown how the estimated value can be different depending on the choice of dimensionality in the model....

Structured Mathematical Modeling of Industrial Boiler

Directory of Open Access Journals (Sweden)

Abdullah Nur Aziz

2014-04-01

Full Text Available As a major utility system in industry, boilers consume a large portion of the total energy and costs. Significant reduction of boiler cost operation can be gained through improvements in efficiency. In accomplishing such a goal, an adequate dynamic model that comprehensively reflects boiler characteristics is required. This paper outlines the idea of developing a mathematical model of a water-tube industrial boiler based on first principles guided by the bond graph method in its derivation. The model describes the temperature dynamics of the boiler subsystems such as economizer, steam drum, desuperheater, and superheater. The mathematical model was examined using industrial boiler performance test data.It can be used to build a boiler simulator or help operators run a boiler effectively.

Can Energy Structure Optimization, Industrial Structure Changes, Technological Improvements, and Central and Local Governance Effectively Reduce Atmospheric Pollution in the Beijing–Tianjin–Hebei Area in China?

Directory of Open Access Journals (Sweden)

Xinxuan Cheng

2018-02-01

Full Text Available Economic growth in the Beijing–Tianjin–Hebei region has been achieved by consuming large amounts of fossil fuels. This produces a large number of pollutants, which damage the physical and mental health of residents, and prevent sustainable economic development. The most urgent task at present is improving the quality of the environment. This paper takes carbon emission as a pollution index, and adopts an extended stochastic impacts by regression on population, affluence, and technology (STIRPAT model in order to study the impact of the optimization of industry structure (in particular the reduction of the proportion of energy-intensive secondary industry, the optimization of the energy structure, and technological improvements on the atmospheric environmental quality. We obtain some important and enlightening discoveries. First of all, the rapid economic growth that has been based on magnanimous fossil fuel consumption is still the main reason for the deterioration of the atmospheric environment. This means that the main driving force of economic growth still comes from high pollution industries, despite a strategy for the transformation of the pattern of economic growth having been proposed for many years. Second, the optimization of the industrial structure has not played a significant role in promoting the reduction of carbon emissions. Through further research, we believe that this may be due to the low-quality development of the third industry. In other words, the traditional service industry related to high energy consumption accounts for a large proportion in regional total output, while the high-end service industry related to small pollution accounts for a relatively small proportion. Third, reducing the consumption of coal and improving the technological level can effectively curb the deterioration of the environmental quality. In addition, we find that transboundary pollution is an important factor affecting the environment in

Band structure of one-dimensional doped photonic crystal with three level atoms using the Fresnel coefficients method

Science.gov (United States)

Jafari, A.; Rahmat, A.; Bakkeshizadeh, S.

2018-01-01

We consider a one-dimensional photonic crystal (1DPC) composed of double-layered dielectrics. Electric permittivity and magnetic permeability of this crystal depends on the incident electromagnetic wave frequency. We suppose that three level atoms have been added to the second layer of each dielectric and this photonic crystal (PC) has been doped. These atoms can be added to the layer with different rates. In this paper, we have calculated and compared the band structure of the mentioned PC considering the effect of added atoms to the second layer with different rates through the Fresnel coefficients method. We find out that according to the effective medium theory, the electric permittivity of the second layer changes. Also the band structure of PC for both TE and TM polarizations changes, too. The width of bandgaps related to “zero averaged refractive index” and “Bragg” increases. Moreover, new gap branches appear in new frequencies at both TE and TM polarizations. In specific state, two branches of “zero permittivity” gap appear in the PC band structure related to TM polarization. With increasing the amount of the filling rate of total volume with three level atoms, we observe a lot of changes in the PC band structure.

Laminated wood as an alternative to wood poles : Engineered wood structures for electric utility and telecommunications industries

Energy Technology Data Exchange (ETDEWEB)

Reisdorff, R. [Laminated Wood Systems Inc., Seward, NE (United States)

2002-07-01

In this PowerPoint presentation, the author discusses the major advantages of laminated structures, for both the electric and telecommunication industries. The advantages include economy, quick delivery, climbing and field modifications, dimensional uniformity and stability. A series of pictures was displayed which showed the manufacturing process. Laminated structures have a proven history. They were developed in Europe in 1890, and introduced to the United States in 1934. Framing members were introduced in the late 1940s, while poles were introduced in 1963, two years ahead of steel poles. Some of the electrical utility applications include: (1) distribution structures, (2) transmission structures such as single-pole, phase over phase switch structures, tangent structures, and H-Frame construction. The applications for the telecommunication industry consist of joint use structures, such as electric and telecommunication, lighting and telecommunication, overhead telephone and wireless; mono-pole applications; three-pole Bell Towers; and tree poles. Examples of each type were shown. figs.

Strength and Biot's coefficient for high-porosity oil- or water-saturated chalk

DEFF Research Database (Denmark)

Andreassen, Katrine Alling

. The Biot coefficient states the degree of cementation or how the pore pressure contributes to the strain resulting from an external load for a porous material. It is here calculated from dynamic measurements and correlated with the strength of outcrop chalk characterized by the onset of pore collapse...... during hydrostatic loading. The hypothesis is that the Biot coefficient and the theory of poroelasticity may cover the fluid effect by including the increased fluid bulk modulus from oil to water. A high number of test results for both oil- and water-saturated high-porosity outcrop chalk show correlation......In the petroleum industry it is relevant to know the Biot coefficient for establishing the effective stresses present in both the overburden and for the reservoir interval. When depleting a reservoir it is important to estimate the settlement through the strain imposed by the effective stress. Also...

Climate change and the macroeconomic structure in pre-industrial europe: new evidence from wavelet analysis.

Science.gov (United States)

Pei, Qing; Zhang, David D; Li, Guodong; Lee, Harry F

2015-01-01

The relationship between climate change and the macroeconomy in pre-industrial Europe has attracted considerable attention in recent years. This study follows the combined paradigms of evolutionary economics and ecological economics, in which wavelet analysis (spectrum analysis and coherence analysis) is applied as the first attempt to examine the relationship between climate change and the macroeconomic structure in pre-industrial Europe in the frequency domain. Aside from confirming previous results, this study aims to further substantiate the association between climate change and macroeconomy by presenting new evidence obtained from the wavelet analysis. Our spectrum analysis shows a consistent and continuous frequency band of 60-80 years in the temperature, grain yield ratio, grain price, consumer price index, and real wage throughout the study period. Besides, coherence analysis shows that the macroeconomic structure is shaped more by climate change than population change. In addition, temperature is proven as a key climatic factor that influences the macroeconomic structure. The analysis reveals a unique frequency band of about 20 years (15-35 years) in the temperature in AD1600-1700, which could have contributed to the widespread economic crisis in pre-industrial Europe. Our findings may have indications in re-examining the Malthusian theory.

Computation of Clebsch-Gordan and Gaunt coefficients using binomial coefficients

International Nuclear Information System (INIS)

Guseinov, I.I.; Oezmen, A.; Atav, Ue

1995-01-01

Using binomial coefficients the Clebsch-Gordan and Gaunt coefficients were calculated for extremely large quantum numbers. The main advantage of this approach is directly calculating these coefficients, instead of using recursion relations. Accuracy of the results is quite high for quantum numbers l 1 , and l 2 up to 100. Despite direct calculation, the CPU times are found comparable with those given in the related literature. 11 refs., 1 fig., 2 tabs

Identifying key factors and strategies for reducing industrial CO2 emissions from a non-Kyoto protocol member's (Taiwan) perspective

International Nuclear Information System (INIS)

Lin, Sue J.; Lu, I.J.; Lewis, Charles

2006-01-01

In this study we use Divisia index approach to identify key factors affecting CO 2 emission changes of industrial sectors in Taiwan. The changes of CO 2 emission are decomposed into emission coefficient, energy intensity, industrial structure and economic growth. Furthermore, comparisons with USA, Japan, Germany, the Netherlands and South Korea are made to have a better understanding of emission tendency in these countries and to help formulate our CO 2 reduction strategies for responding to the international calls for CO 2 cuts. The results show that economic growth and high energy intensity were two key factors for the rapid increase of industrial CO 2 emission in Taiwan, while adjustment of industrial structure was the main component for the decrease. Although economic development is important, Taiwan must keep pace with the international trends for CO 2 reduction. Among the most important strategies are continuous efforts to improve energy intensity, fuel mix toward lower carbon, setting targets for industrial CO 2 cuts, and advancing green technology through technology transfer. Also, the clean development mechanism (CDM) is expected to play an important role in the future

Advanced parallel strategy for strongly coupled fast transient fluid-structure dynamics with dual management of kinematic constraints

International Nuclear Information System (INIS)

Faucher, Vincent

2014-01-01

Simulating fast transient phenomena involving fluids and structures in interaction for safety purposes requires both accurate and robust algorithms, and parallel computing to reduce the calculation time for industrial models. Managing kinematic constraints linking fluid and structural entities is thus a key issue and this contribution promotes a dual approach over the classical penalty approach, introducing arbitrary coefficients in the solution. This choice however severely increases the complexity of the problem, mainly due to non-permanent kinematic constraints. An innovative parallel strategy is therefore described, whose performances are demonstrated on significant examples exhibiting the full complexity of the target industrial simulations. (authors)

Molar extinction coefficients of some carbohydrates in aqueous ...

Indian Academy of Sciences (India)

of plants and animals, both as structural elements and in the maintenance of functional ... In this paper we report the molar extinction coefficient ε, of carbohydrates ... as the area, which has to be hit by the photons in order to cause interaction.

Criterions for fixing regulatory seismic acceleration coefficients

International Nuclear Information System (INIS)

Costes, D.

1988-03-01

Acceleration coeffficients to be taken into account in seismic areas for calculation of structures are defined in national seismic regulations. Joined to the described qualitative requirements, these coefficients represent a balance between precaution costs and avoided damages, both in terms of material repairing costs and damage to human life. Persons in charge of fixing these coefficients must be informed of corresponding quantitative aspects. Data on seismic motions occurrencies and consequences are gathered here and convoluted to mean damage evaluations. Indications on precaution costs are joined, which shows that currently recommended levels of seismic motions are high relatively to financial profitability, and represent in fact an aethical choice about human life value [fr

Effective diffusion coefficients of /sup 3/H/sub 2/O in several porous materials

Energy Technology Data Exchange (ETDEWEB)

Terashima, Y [Kyoto Univ. (Japan). Faculty of Engineering; Kumaki, T

1976-12-01

Diffusion coefficients of radionuclides in some porous structural materials and porous components of earth stratum are important as the basis for the safety evaluation of the storage and disposal of radioactive wastes. In our previous works, the method of analysis and experiment using a permeative type diffusion cell for measurement of effective diffusion coefficient was established, and experimental results were reported. In this paper, effective diffusion coefficients of /sup 3/H/sub 2/O in mortar, concrete, brick, clay layer, and sand layer were measured, and characteristics of these pore structure were discussed on the basis of tourtusity factor.

PENILAIAN TEKNOLOGI UNTUK MENENTUKAN POSISI INDUSTRI PESAING

Directory of Open Access Journals (Sweden)

Wahyu Susihono

2013-02-01

Full Text Available PT Sumiati Ekspor Internasinal bergerak pada usaha penjualan handycraft yang dipasok oleh lima industri kecil binaannya. Perusahaan akan melakukan privatisasi dalam waktu dekat, manajer pusat menginginkan ada satu industri kecil mengambil alih pengelolaan. Pihak manajemen perusahaan menghendaki ada penilaian teknologi secara internal dan eksternal kepada lima industri kecil binaanya sebagai dasar pengambilan keputusan. Dalam Penelitian ini dilakukan penilaian kepada semua industri kecil pemasokhandycraft dengan pendekatan model teknometrik, yaitu memperkirakan derajat sophistication komponen teknologi, evaluasi tiap komponen technoware, humanware, inforware dan organware dan menilai state-of-the-art. Kuesioner yang disebarkan dari lima industri kecil diolah menggunakan pairwise comparison Analytic Hierarchy Process”(AHP, dilanjutkan dengan perhitungan TCC (Technology Contribution Coefficient. Penilaian internal perusahaan dilakukan dengan model DEA (data envelopment analysis. Hasil akhir TCC dan DEA secara kuantitatif dibandingkan. Hasil TCC (Technology Contribution Coefficient secara berturut-turut dari industry yang memperoleh nilai terbesar adalah Industri Maharani 52.23%, Industri Bestari 42.87%, Industri Priyo 41.51%, Industri Rizky 32.66%, Industri Teguh 31.93%. Unsur kontribusi teknologi terbesar yang dihasilkan industri Maharani adalah organware, sedangkan empat perusahaan lainnya humanware. Unsur teknologi yang harus dikembangkan dalam jangka pendek untuk semua industri kecil adalah technoware. Hasil penilaian internal perusahaan dengan model DEA menunjukan bahwa industri Maharani mempunyai rangking tertinggi, sedangkan Industri Rizki pada rangking terrendah. Model teknometrik dikombinasi pairwise comparison AHP dan DEA dapat membantu perusahaan besar melakukan penilaian teknologi kepada industri kecil sejenis. Kata Kunci : penilaian teknologi, model teknometrik, pairwise comparison AHP, DEA   Abstract Sumiati Export International

Assessment of United States industry structural codes and standards for application to advanced nuclear power reactors: Appendices. Volume 2

International Nuclear Information System (INIS)

Adams, T.M.; Stevenson, J.D.

1995-10-01

Throughout its history, the USNRC has remained committed to the use of industry consensus standards for the design, construction, and licensing of commercial nuclear power facilities. The existing industry standards are based on the current class of light water reactors and as such may not adequately address design and construction features of the next generation of Advanced Light Water Reactors and other types of Advanced Reactors. As part of their on-going commitment to industry standards, the USNRC commissioned this study to evaluate US industry structural standards for application to Advanced Light Water Reactors and Advanced Reactors. The initial review effort included (1) the review and study of the relevant reactor design basis documentation for eight Advanced Light Water Reactors and Advanced Reactor Designs, (2) the review of the USNRCs design requirements for advanced reactors, (3) the review of the latest revisions of the relevant industry consensus structural standards, and (4) the identification of the need for changes to these standards. The results of these studies were used to develop recommended changes to industry consensus structural standards which will be used in the construction of Advanced Light Water Reactors and Advanced Reactors. Over seventy sets of proposed standard changes were recommended and the need for the development of four new structural standards was identified. In addition to the recommended standard changes, several other sets of information and data were extracted for use by USNRC in other on-going programs. This information included (1) detailed observations on the response of structures and distribution system supports to the recent Northridge, California (1994) and Kobe, Japan (1995) earthquakes, (2) comparison of versions of certain standards cited in the standard review plan to the most current versions, and (3) comparison of the seismic and wind design basis for all the subject reactor designs

Technique for Determining Lock Coefficient of Differential "Quif"

Directory of Open Access Journals (Sweden)

A. B. Fominyh

2015-01-01

Full Text Available Increasing the traction qualities of cars on the black ice and snow-covered roads is a relevant task. There are two ways to solve this task, i.e. optimize distribution of the power stream between the driving wheels of the car; introduce a differential (differentials of the increased friction in transmission.Now, an installation of the increased friction differential in transmission is the most widespread measure to increase traction properties of cars. The differential of design "Quif" is one of such differentials. To estimate the efficiency degree of using such a differential is possible either experimentally or theoretically. In case of theoretically determined usefulness of this differential design, as an estimate indicator of the differential installation in transmission a coefficient of lock is accepted.The article considers an algorithm and a technique to calculate a lock coefficient of the differential design "Quif" allowing us to define numeric values of the lock coefficient of such differential at designing stage. It also considers how the lock coefficient depends on the gearing angle and tilt angle of the gear wheel teeth of differential. The given estimating algorithm of designated parameter of differential has more logical and compact structure with regard to the known ones. The lock coefficient values calculated by the offered technique differ from the experimental data by no more than 12%. Taking into account abovementioned, the presented technique for calculating lock coefficient of differential "Quif" is advisable for practical application.

Determination of the mass-transfer coefficient in liquid phase in a stream-bubble contact device

Science.gov (United States)

Dmitriev, A. V.; Dmitrieva, O. S.; Madyshev, I. N.

2016-09-01

One of the most effective energy saving technologies is the improvement of existing heat and mass exchange units. A stream-bubble contact device is designed to enhance the operation efficiency of heat and mass exchange units. The stages of the stream-bubble units that are proposed by the authors for the decarbonization process comprise contact devices with equivalent sizes, whose number is determined by the required performance of a unit. This approach to the structural design eliminates the problems that arise upon the transition from laboratory samples to industrial facilities and makes it possible to design the units of any required performance without a decrease in the effectiveness of mass exchange. To choose the optimal design that provides the maximum effectiveness of the mass-exchange processes in units and their intensification, the change of the mass-transfer coefficient is analyzed with the assumption of a number of parameters. The results of the study of the effect of various structural parameters of a stream-bubble contact device on the mass-transfer coefficient in the liquid phase are given. It is proven that the mass-transfer coefficient increases in the liquid phase, in the first place, with the growth of the level of liquid in the contact element, because the rate of the liquid run-off grows in this case and, consequently, the time of surface renewal is reduced; in the second place, with an increase in the slot diameter in the downpipe, because the jet diameter and, accordingly, their section perimeter and the area of the surface that is immersed in liquid increase; and, in the third place, with an increase in the number of slots in the downpipe, because the area of the surface that is immersed in the liquid of the contact element increases. Thus, in order to increase the mass-transfer coefficient in the liquid phase, it is necessary to design the contact elements with a minimum width and a large number of slots and their increased diameter; in

High-order dynamic modeling and parameter identification of structural discontinuities in Timoshenko beams by using reflection coefficients

Science.gov (United States)

Fan, Qiang; Huang, Zhenyu; Zhang, Bing; Chen, Dayue

2013-02-01

Properties of discontinuities, such as bolt joints and cracks in the waveguide structures, are difficult to evaluate by either analytical or numerical methods due to the complexity and uncertainty of the discontinuities. In this paper, the discontinuity in a Timoshenko beam is modeled with high-order parameters and then these parameters are identified by using reflection coefficients at the discontinuity. The high-order model is composed of several one-order sub-models in series and each sub-model consists of inertia, stiffness and damping components in parallel. The order of the discontinuity model is determined based on the characteristics of the reflection coefficient curve and the accuracy requirement of the dynamic modeling. The model parameters are identified through the least-square fitting iteration method, of which the undetermined model parameters are updated in iteration to fit the dynamic reflection coefficient curve with the wave-based one. By using the spectral super-element method (SSEM), simulation cases, including one-order discontinuities on infinite- and finite-beams and a two-order discontinuity on an infinite beam, were employed to evaluate both the accuracy of the discontinuity model and the effectiveness of the identification method. For practical considerations, effects of measurement noise on the discontinuity parameter identification are investigated by adding different levels of noise to the simulated data. The simulation results were then validated by the corresponding experiments. Both the simulation and experimental results show that (1) the one-order discontinuities can be identified accurately with the maximum errors of 6.8% and 8.7%, respectively; (2) and the high-order discontinuities can be identified with the maximum errors of 15.8% and 16.2%, respectively; and (3) the high-order model can predict the complex discontinuity much more accurately than the one-order discontinuity model.

Research Investments and Market Structure in the Food Processing, Agricultural Input, and Biofuel Industries Worldwide

OpenAIRE

Fuglie, Keith O.; Heisey, Paul W.; King, John L.; Day-Rubenstein, Kelly A.; Schimmelpfennig, David E.; Wang, Sun Ling

2011-01-01

Meeting growing global demand for food, fiber, and biofuel requires robust investment in agricultural research and development (R&D) from both public and private sectors. This study examines global R&D spending by private industry in seven agricultural input sectors, food manufacturing, and biofuel and describes the changing structure of these industries. In 2007 (the latest year for which comprehensive estimates are available), the private sector spent $19.7 billion on food and agricultural ...

Structured Mathematical Modeling of Industrial Boiler

OpenAIRE

Aziz, Abdullah Nur; Nazaruddin, Yul Yunazwin; Siregar, Parsaulian; Bindar, Yazid

2014-01-01

As a major utility system in industry, boilers consume a large portion of the total energy and costs. Significant reduction of boiler cost operation can be gained through improvements in efficiency. In accomplishing such a goal, an adequate dynamic model that comprehensively reflects boiler characteristics is required. This paper outlines the idea of developing a mathematical model of a water-tube industrial boiler based on first principles guided by the bond graph method in its derivation. T...

Structural analysis of engineering consulting and design industry

OpenAIRE

Gabriel Sorin STROE

2013-01-01

Strategic management models have been evolving in the business domain on a continuous basis but the overwhelming majority of works in this field gives the impression that it is only the manufacturing industry that needs strategy and strategic models, or that the strategy in the professional services industry is the same as in the manufacturing industry despite their distinctive characteristics and managerial implications. By using the Porter’s Five Forces framework for industry analysis, whic...

Investigating Food and Beverage Industry Market Structure and Market Power Based on Leo and Bresnahan’s Approach

OpenAIRE

M. Nabishahikitash; E. Gholipoorbolasi; A. Mohammadzadeh

2016-01-01

Introduction: Food processing industries are one of the major industrial groups in developing countries which play an important role in the economic development of these countries. With the Developed and Developing Food Industry on the other hand, food security and providing food are very important in each country. In an overview, markets are divided into two groups: The first group is a market with perfect competition. And second group is markets with monopoly structure.One of the importa...

Estimation of water diffusion coefficient into polycarbonate at different temperatures using numerical simulation

Energy Technology Data Exchange (ETDEWEB)

Nasirabadi, P. Shojaee; Jabbari, M.; Hattel, J. H. [Process Modelling Group, Department of Mechanical Engineering, Technical University of Denmark, Nils Koppels Allé, 2800 Kgs. Lyngby (Denmark)

2016-06-08

Nowadays, many electronic systems are exposed to harsh conditions of relative humidity and temperature. Mass transport properties of electronic packaging materials are needed in order to investigate the influence of moisture and temperature on reliability of electronic devices. Polycarbonate (PC) is widely used in the electronics industry. Thus, in this work the water diffusion coefficient into PC is investigated. Furthermore, numerical methods used for estimation of the diffusion coefficient and their assumptions are discussed. 1D and 3D numerical solutions are compared and based on this, it is shown how the estimated value can be different depending on the choice of dimensionality in the model.

R&D Characteristics and Organizational Structure: Case Studies of University-Industry Research Centers

Science.gov (United States)

Hart, Maureen McArthur

2013-01-01

Within the past few decades, university-industry research centers have been developed in large numbers and emphasized as a valuable policy tool for innovation. Yet little is known about the heterogeneity of organizational structure within these centers, which has implications regarding policy for and management of these centers. This dissertation…

Agglomeration externalities, market structure and employment growth in high-tech industries: Revisiting the evidence

Directory of Open Access Journals (Sweden)

Cieślik Andrzej

2015-09-01

Full Text Available In this paper we revisit the existing empirical evidence on the effects of various agglomeration externalities and the market structure on employment growth in the high-tech industries of the European Economic Area (EEA. Our study is based on the dynamic panel dataset of two-digit NACE rev 1.1. industries in 285 regions of the European Economic Area for the period 1995-2007. We find that employment growth is negatively related to competition, while localization and urbanization externalities do not seem to affect growth.

Determinants of capital structure: evidence from the Czech automotive industry

Directory of Open Access Journals (Sweden)

Pavlína Pinková

2012-01-01

Full Text Available The objective of the paper is to identify the determinants influencing the capital structure of large and medium-sized enterprises of the automotive industry in the Czech Republic. The sample consists of 100 companies belonging to NACE division 29. The data come from financial statements of selected companies and cover a period from 2006 to 2010. For the purpose of the paper quantitative research is used. The selection of appropriate dependent and independent is realized on the basis of secondary research on studies of capital structure. The analysis of variance, correlation and regression analyses have been performed to see the nature of relationship between variables. Size, tangibility, profitability and liquidity appear to be relevant determinants of capital structure. Growth is not a statistically significant determinant of leverage. It has been observed that the maturity of debt has to be considered, since the investigation of total debt only does not provide precious results. The findings do not unequivocally support either the static trade-off theory or the pecking order theory.

Electron-impact excitation rate-coefficients and polarization of subsequent emission for Ar"+ ion

International Nuclear Information System (INIS)

Dipti; Srivastava, Rajesh

2016-01-01

Electron impact excitation in Ar"+ ions has been studied by using fully relativistic distorted wave theory. Calculations are performed to obtain the excitation cross-sections and rate-coefficients for the transitions from the ground state 3p"5 (J=3/2) to fine-structure levels of excited states 3p"44s, 3p"44p, 3p"45s, 3p"45p, 3p"43d and 3p"44d. Polarization of the radiation following the excitation has been calculated using the obtained magnetic sub-level cross-sections. Comparison of the present rate-coefficients is also done with the previously reported theoretical results for some unresolved fine structure transitions. - Highlights: • Fully relativistic distorted wave theory has been used to study the excitation of fine-structure states of Ar"+. • We have calculated electron-impact excitation cross-sections for the wide range of incident electron energies. • Electron impact excitation rate-coefficients are calculated as a function of electron temperature. • Polarization of photons emitted following the decay of the excited fine-structure states are also reported.

Assessing Reliability of a Multi-Dimensional Scale by Coefficient Alpha

Directory of Open Access Journals (Sweden)

Ivan Šerbetar

2016-04-01

Full Text Available The purpose of the study was to assess internal consistency by calculating coefficient alpha. It presents the variation in coefficient alpha, depending on questionnaire length and the homogeneity or heterogeneity of the questionnaire. The maximum possible value for coefficient alpha was also calculated by the item elimination method. The study included 99 children aged 10. The children completed The Athletic Coping Skills Inventory – 28 (ACSI-28; Smith et al., 1995, which contains seven constructs: coping with adversity, coachability, concentration, confidence and achievement motivation, goal setting and mental preparation, peaking under pressure and freedom from worry. The results confirmed that the values of the alpha coefficient vary depending on the number and composition of items and the sample size. In terms of item structure, homogeneous constructs yielded lower values for the alpha coefficient (in a range from .48 to .61 than the questionnaire with all the constructs (alpha = .79, despite higher inter-item correlations. In terms of the number of items, the longer test generated higher alpha coefficients (alpha = .79 than the shorter test (half-sets of items = .60, .73, .69, .70. A higher overall value (alpha = .83 can be achieved by item elimination.

Nuclear fuel cycle bringing about opportunity for industrial structure conversion

International Nuclear Information System (INIS)

Nakamura, Taiki

1991-01-01

Three facilities of nuclear fuel cycle, that is, uranium enrichment, fuel reprocessing and low level radioactive waste storage and burying, are being constructed by electric power industry in Rokkasho Village, Kamikita County, Aomori Prefecture. These are the large scale project of the total investment of 1.2 trillion yen. It is expected that the promotion of this project exerts not a little effect to the social economy of the surrounding districts. Agency of Natural Resources and Energy, Ministry of International Trade and Industry, carried out the social environment survey on the location of nuclear fuel cycle facilities. In this report, the outline of the economical pervasive effect due to the construction and operation of the three facilities in the report of this survey is described. The method of survey and the organization, the outline of three nuclear fuel cycle facilities, the economical pervasive effect, the effect to the local social structure, and the direction of arranging occupation, residence and leisure accompanying the location of three nuclear fuel cycle facilities are reported. (K.I.)

Approaches to evaluation of changes in capital structure in industrial branches

Directory of Open Access Journals (Sweden)

Martin Landa

2010-01-01

Full Text Available Capital structure is described as a relation between equity and debts while the mutual consequences among items of company’s assets and resources employed as well as the cost of capital are also taken into account. Both, the theory and practice, at evaluation of approaches to capital structure are focu­sed on creation and optimization of capital structure. Relatively less frequent approach is the analy­sis of a state and of changes in capital structure on the level of whole business branch. But on this basis, it is possible to investigate some “average” approaches to selection of financial resources. At ca­pi­tal structure optimization (the proportion between equity and debts, a wide range of criteria plays a substantial role, e.g. cost of capital, risk, expected profitability, liquidity, dividend policy. These criteria have joint effect. This way, a logic question which criteria are preferred more and which criteria are preferred less appears. The article deals with the analysis of capital structure of three branches of manufacturing industry (the branch of production of plastics, the branch of production of electric equipments, the branch of production of textile in the years 2007–2009 with the special focus on development of financial structure, capital structure and on cost of capital.

Analytical computation of reflection and transmission coefficients for love waves

International Nuclear Information System (INIS)

Romanelli, F.; Vaccari, F.

1995-09-01

The computation of the transmission and reflection coefficients is an important step in the construction, if modal summation technique is used, of synthetic seismograms for 2-D or 3-D media. These coupling coefficients for Love waves at a vertical discontinuity are computed analytically. Numerical test for realistic structures show how the energy carried by an incoming mode is redistributed on the various modes existing on both sides of the vertical interface. (author). 15 refs, 8 figs

Industry

International Nuclear Information System (INIS)

Schindler, I.; Wiesenberger, H.

2001-01-01

This chapter of the environmental control report deals with the environmental impact of the industry in Austria. It gives a review of the structure and types of the industry, the legal framework and environmental policy of industrial relevance. The environmental situation of the industry in Austria is analyzed in detail, concerning air pollution (SO 2 , NO x , CO 2 , CO, CH 4 , N 2 O, NH 3 , Pb, Cd, Hg, dioxin, furans), waste water, waste management and deposit, energy and water consumption. The state of the art in respect of the IPPC-directives (European Integrated Pollution Prevention and Control Bureau) concerning the best available techniques of the different industry sectors is outlined. The application of European laws and regulations in the Austrian industry is described. (a.n.)

Coefficient estimates of negative powers and inverse coefficients for ...

Indian Academy of Sciences (India)

and the inequality is sharp for the inverse of the Koebe function k(z) = z/(1 − z)2. An alternative approach to the inverse coefficient problem for functions in the class S has been investigated by Schaeffer and Spencer [27] and FitzGerald [6]. Although, the inverse coefficient problem for the class S has been completely solved ...

Preliminary quantification of the permeability, solubility and diffusion coefficients of major aroma compounds present in herbs through various plastic packaging materials.

Science.gov (United States)

Leelaphiwat, Pattarin; Auras, Rafael A; Burgess, Gary J; Harte, Janice B; Chonhenchob, Vanee

2018-03-01

Aroma permeation through packaging material is an important factor when designing a package for food products. The masses of aroma compounds permeating through films over time were measured at 25 °C using a quasi-isostatic system. A model was proposed for estimating the permeability coefficients (P) of key aroma compounds present in fresh herbs (i.e. eucalyptol, estragole, linalool and citral) through major plastic films used by the food industry [i.e. low-density polyethylene (LDPE), polypropylene (PP), nylon (Nylon), polyethylene terephthalate (PET), metalised-polyethylene terephthalate (MPET) and poly(lactic acid) (PLA)]. Solubility coefficients (S) were estimated from the amount of aroma compound sorbed in the films. Diffusion coefficients (D) were estimated following from the relation P = D*S. P and D for all four aroma compounds were highest in LDPE, except for eucalyptol, which P was slightly higher in PLA. The solubility coefficients and contact angles were highest in PLA suggesting the highest affinity of PLA to these aroma compounds. The theoretical solubility parameters were correlated with the solubility coefficients for estragole and citral, but not for eucalyptol and linalool. The preliminary P, D and S of eucalyptol, estragole, linalool and citral through LDPE, PP, Nylon, PET, MPET and PLA can be useful in selecting the proper packaging material for preserving these specific aroma compounds in food products and can potentially be used for estimating the shelf life of food products based on aroma loss. © 2017 Society of Chemical Industry. © 2017 Society of Chemical Industry.

Determinants of Rural Industrial Entrepreneurship of Farmers in West Bengal : A Structural Equations Approach

NARCIS (Netherlands)

Folmer, Henk; Dutta, Subrata; Oud, Han

2010-01-01

This article presents a structural equations model of rural industrial entrepreneurship (RIE) among farmers in the Bardhaman district, West Bengal, India. It identifies the determinants of RIE but also analyzes impacts of RIE on its endogenous determinants. Age, education, marital status, number of

Determinants of rural industrial entrepreneurship of farmers in West Bengal: A structural equations approach

NARCIS (Netherlands)

Folmer, H.; Dutta, S.; Oud, J.H.L.

2010-01-01

This article presents a structural equations model of rural industrial entrepreneurship (RIE) among farmers in the Bardhaman district, West Bengal, India. It identifies the determinants of RIE but also analyzes impacts of RIE on its endogenous determinants. Age, education, marital status, number of

An Evaluation of Industrial Facilities Defects in Selected Industrial Estates in Lagos State, Nigeria

Directory of Open Access Journals (Sweden)

Oseghale, G.E.

2014-01-01

Full Text Available The study appraised the state of industrial facilities in selected industrial estates established between 1957 and 1981 in Lagos State by examining the nature and causes of facilities’ defects in the selected industrial estates. The buildings sampled were load bearing sandcrete block wall (1%, concrete framed structure (83% and steel framed structure (16%. Data were sourced using structured questionnaire administered on the staff of maintenance department of 35 building materials and plastic manufacturing industries purposively selected and located in 18 industrial estates. Data obtained were analyzed using descriptive statistic. The study found the structural elements of the buildings, i.e. foundations, beams, walls, and floors satisfactory. Using the mean response analysis, the result showed that the most severe factors responsible for industrial facilities’ defects were combined effects of geo-climatic factors (2.35, combined effects of biological agencies (2.15, corrosion (1.98, and physical aggression on the facilities (1.71.

The Non-Linear Effect of Chinese Financial Developments on Energy Supply Structures

Directory of Open Access Journals (Sweden)

Jian Chai

2016-10-01

Full Text Available Currently, oversupply coal and coal-based power in China poses a great challenge to energy structure optimization and emissions reduction. The energy industry, however, is closely linked to the financial sector. In view of this, using a non-linear Panel Smooth Transition Regression (PSTR model, this paper examines the threshold effects of financial developments on energy supply structures for 17 energy supply provinces in China observed over 2000–2014. The main results are: (1 The ratio of coal supply (LCSR specification is seen to be a four-regime PSTR model with added value in the financial industry/GDP (LFIR as the threshold variable. The LFIR and LCSR show a positive correlation, and the elastic coefficients change between 0.02 and ~0.085; the impact of financial institutions’ loan balance/GDP (LLAN on LCSR takes on an inverse U-shaped curve: first positive, then negative, and again positive with the financial crisis in 2008 as the turning point; (2 The ratio of thermal power generation (LTPG specification is seen to be a two-regime PSTR model with investment in the coal industry/GDP (LCIR as the threshold variable. Results show that LFIR has a negative effect on LTPG, and the coefficients in the low regime tend to be 0.344%, then gradually decrease to 0.051% in the high regime. The influence of LLAN on the LTPG is positive before and negative after the financial crisis. The influence of the foreign direct investment GDP proportion (LFDI, the degree of financial openness on the LCSR and LTPG both remain negative. Therefore, in the process of formulating energy conservation policies and adjusting energy-intensive industrial structures, the government should fully consider the effect of financial developments.

From a Music Industry to Sound Industries

OpenAIRE

Thor Magnusson

2013-01-01

Commodification has been an inherent aspect of music for many centuries. The aggregation of the diverse commodification practices could be described as an "industry," but this is an industry that has always been in a state of transition. New technologies, media formats, and practices appear regularly, requiring swift responses by the incumbent music industry. Although periods of relative stabil- ity have existed, where economic structures become established, the field has always been ch...

Effective diffusion coefficient of radon in concrete, theory and method for field measurements

International Nuclear Information System (INIS)

Culot, M.V.J.; Olson, H.G.; Schiager, K.J.

1976-01-01

A linear diffusion model serves as the basis for determination of an effective radon diffusion coefficient in concrete. The coefficient was needed to later allow quantitative prediction of radon accumulation within and behind concrete walls after application of an impervious radon barrier. A resolution of certain discrepancies noted in the literature in the use of an effective diffusion coefficient to model diffusion of a radioactive gas through a porous medium is suggested. An outline of factors expected to affect the concrete physical structure and the effective diffusion coefficient of radon through it is also presented. Finally, a field method for evaluating effective radon diffusion coefficients in concrete is proposed and results of measurements performed on a concrete foundation wall are compared with similar published values of gas diffusion coefficients in concrete. (author)

Determining Composite Validity Coefficients for Army Jobs and Job Families

National Research Council Canada - National Science Library

Zeidner, Joseph

2002-01-01

...) is to compute composite validity coefficients. using criterion data derived from the 1987 - 1989 Skill Qualifications Test program, for the 7-test ASVAB for 150, 17, and 9 job family structures...

Converting Sabine absorption coefficients to random incidence absorption coefficients

DEFF Research Database (Denmark)

Jeong, Cheol-Ho

2013-01-01

are suggested: An optimization method for the surface impedances for locally reacting absorbers, the flow resistivity for extendedly reacting absorbers, and the flow resistance for fabrics. With four porous type absorbers, the conversion methods are validated. For absorbers backed by a rigid wall, the surface...... coefficients to random incidence absorption coefficients are proposed. The overestimations of the Sabine absorption coefficient are investigated theoretically based on Miki's model for porous absorbers backed by a rigid wall or an air cavity, resulting in conversion factors. Additionally, three optimizations...... impedance optimization produces the best results, while the flow resistivity optimization also yields reasonable results. The flow resistivity and flow resistance optimization for extendedly reacting absorbers are also found to be successful. However, the theoretical conversion factors based on Miki's model...

The Determinants of Capital Structure: an Empirical Study of Omani Listed Industrial Companies

Directory of Open Access Journals (Sweden)

Mawih Al Ani

2015-06-01

Full Text Available This study investigates five determinants of capital structure (leverage in three subsectors of the Omani Industrial companies (food, construction and chemical listed on Muscat Securities Market for the period 2008–2012. According to available information and literature review, the determinants are profitability measured by return on assets (ROA, risk measured by the standard deviation of return on assets, the size of the company measured by the natural logarithm of total assets, rate of growth measured by the market-book value ratio (P/E and assets tangibility measured by fixed assets to total assets ratio. The capital structure or leverage is measured by total debt ratio. In the industrial sector as whole; the findings of the study indicate that there is a statistically positive association between risk and tangibility and leverage. Also, there is a statistically negative association between growth rate and profitability and leverage, while there is no association with size. Regression analysis indicates that size, tangibility and risk have a statistically significant effect on leverage.

Measurement of atomic number and mass attenuation coefficient in ...

Indian Academy of Sciences (India)

literature on the measurement of mass attenuation coefficient in magnesium ferrite. The knowledge of photon ... pure) MgO and Fe2O3. The details of experimental ... and (4 4 0) planes belonging to cubic spinel structure. The XRD pattern ...

3-loop heavy flavor Wilson coefficients in deep-inelastic scattering

International Nuclear Information System (INIS)

Ablinger, J.; Hasselhuhn, A.; Schneider, C.; Manteuffel, A. von

2014-09-01

We present our most recent results on the calculation of the heavy flavor contributions to deep-inelastic scattering at 3-loop order in the large Q 2 limit, where the heavy flavor Wilson coefficients are known to factorize into light flavor Wilson coefficients and massive operator matrix elements. We describe the different techniques employed for the calculation and show the results in the case of the heavy flavor non-singlet and pure singlet contributions to the structure function F 2 (x,Q 2 ).

Determination of Diffusion Coefficients and Activation Energy of Selected Organic Liquids using Reversed-Flow Gas Chromatographic Technique

International Nuclear Information System (INIS)

Khalisanni Khalid; Rashid Atta Khan; Sharifuddin Mohd Zain

2012-01-01

Evaporation of vaporize organic liquid has ecological consequences when the compounds are introduced into both freshwater and marine environments through industrial effluents, or introduced directly into the air from industrial unit processes such as bioreactors and cooling towers. In such cases, a rapid and simple method are needed to measure physicochemical properties of the organic liquids. The Reversed-Flow Gas Chromatography (RF-GC) sampling technique is an easy, fast and accurate procedure. It was used to measure the diffusion coefficients of vapors from liquid into a carrier gas and at the same time to determine the rate coefficients for the evaporation of the respective liquid. The mathematical expression describing the elution curves of the samples peaks was derived and used to calculate the respective parameters for the selected liquid pollutants selected such as methanol, ethanol, 1-propanol, 1-butanol, n-pentane, n-hexane, n-heptane and n-hexadecane, evaporating into the carrier gas of nitrogen. The values of diffusion coefficients found were compared with those calculated theoretically or reported in the literature. The values of evaporation rate were used to determine the activation energy of respective samples using Arrhenius equation. An interesting finding of this work is by using an alternative mathematical analysis based on equilibrium at the liquid-gas interphase, the comparison leads to profound agreement between theoretical values of diffusion coefficients and experimental evidence. (author)

Influences of the chemical structure of entrainers on the activity coefficients in presence of biodiesel

International Nuclear Information System (INIS)

Mäder, A; Fleischmann, A; Fang, Ye; Krahl, J; Ruck, W

2012-01-01

In this work we analyzed the strength of the intermolecular forces between biodiesel and the entrainer and their influence on the entrainer's ability to interact with biodiesel. Furthermore we investigated the influence of the chemical structure of an entrainer to the interaction with biodiesel. For this purpose the activity coefficients γ ∞ at infinite dilution of acids, aldehydes, ketones and alcohols in biodiesel were measured with the method of headspace gas chromatography (HSGC). Short-chained acids showed the highest interaction of the analyzed entrainers caused by their ability to build hydrogen bonds with biodiesel. Increased chain length of the acids cause reduced interaction with biodiesel, which is mainly due to the higher obstruction of the acid molecule and therefore the reduced ability to build hydrogen bonds with biodiesel. Aldehydes, ketones and alcohols showed lower interaction with biodiesel compared to the acids. Longer-chained alcohols showed increased interaction with biodiesel due to the raised London Forces and an inductive +I effect of the molecule chain.

Regulatory policy and structural change in the natural gas industry: A transaction cost perspective

International Nuclear Information System (INIS)

Sauer, D.G.

1991-01-01

The Federal Energy Regulatory Commission has recently promoted policy initiatives designed to substitute market responsive industry practices for the micro-management regulatory practices previously employed. These new policies are expected to generate a flexible gas pricing policy that more accurately reflects market supply and demand conditions. Historically, much of the regulation of this industry was enacted to ensure that pipeline companies would be able to recover the very large up-front investments in immobile equipment that characterize the production, transportation, storage, and distribution of natural gas. The institutional detail available from historical accounts of the development of the industry are used to describe structural change over time. Regulatory policy, the level of asset specificity, and the extent of secondary environmental uncertainty are all shown to exert significant effects on the level of integration into production, storage and marketing

Determinants of Iran's BilateralIntra-industry Trade in Pharmaceutical Industry.

Science.gov (United States)

Aghlmand, Siamak; Rahimi, Bahlol; Farrokh-Eslamlou, Hamidreza; Nabilou, Bahram; Yusefzadeh, Hassan

2018-01-01

Among non-oil and in trade arena, drug has always been strategic importance and most government especially industrialized countries pay special attention to its production and trade issues. Thus, having a comprehensive view from economic perspective to this section is essential for suggesting intervention. This was a descriptive-analytical and panel study. In this study, gravity model is used to estimate Iran's bilateral intra-industry trade in pharmaceutical products in the 2001-2012 periods. To illustrate the extent of pharmaceutical's intra-industry trade between Iran and its major trading partners, the explanatory variables of market size, income, factor endowments, distance, cultural contributions, and similarities and also special trade arrangements have been applied. Analysis of factors affecting Iran's bilateral intra-industry trade in pharmaceutical industry showed that the average GDP and cultural similarities had a significant positive impact on Iran's bilateral IIT, while the difference in GDP has a negative and significant effect. Coefficients obtained for the geographical distance and the average ratio of total capital to the labor force is not consistent with theoretical expectations. Special trade arrangements did not have significant impact on the extent of bilateral intra-industry trade between Iran and its trading partners. The knowledge of the intra-industry trade between Iran and its trade partners make integration between the countries. Factors affecting this type of trade pattern underlie its development in trade relationship. Therefore, the findings of this study would be useful in helping to develop and implement policies for the expansion of the pharmaceutical trade.

Adaptive operational modal identification for slow linear time-varying structures based on frozen-in coefficient method and limited memory recursive principal component analysis

Science.gov (United States)

Wang, Cheng; Guan, Wei; Wang, J. Y.; Zhong, Bineng; Lai, Xiongming; Chen, Yewang; Xiang, Liang

2018-02-01

To adaptively identify the transient modal parameters for linear weakly damped structures with slow time-varying characteristics under unmeasured stationary random ambient loads, this paper proposes a novel operational modal analysis (OMA) method based on the frozen-in coefficient method and limited memory recursive principal component analysis (LMRPCA). In the modal coordinate, the random vibration response signals of mechanical weakly damped structures can be decomposed into the inner product of modal shapes and modal responses, from which the natural frequencies and damping ratios can be well acquired by single-degree-of-freedom (SDOF) identification approach such as FFT. Hence, for the OMA method based on principal component analysis (PCA), it becomes very crucial to examine the relation between the transformational matrix and the modal shapes matrix, to find the association between the principal components (PCs) matrix and the modal responses matrix, and to turn the operational modal parameter identification problem into PCA of the stationary random vibration response signals of weakly damped mechanical structures. Based on the theory of "time-freezing", the method of frozen-in coefficient, and the assumption of "short time invariant" and "quasistationary", the non-stationary random response signals of the weakly damped and slow linear time-varying structures (LTV) can approximately be seen as the stationary random response time series of weakly damped and linear time invariant structures (LTI) in a short interval. Thus, the adaptive identification of time-varying operational modal parameters is turned into decompositing the PCs of stationary random vibration response signals subsection of weakly damped mechanical structures after choosing an appropriate limited memory window. Finally, a three-degree-of-freedom (DOF) structure with weakly damped and slow time-varying mass is presented to illustrate this method of identification. Results show that the LMRPCA

Natural hazards, vulnerability and structural resilience: tsunamis and industrial tanks

Directory of Open Access Journals (Sweden)

Ahmed Mebarki

2016-05-01

Full Text Available The paper presents an integrated framework which deals with natural hazards (tsunamis, physical vulnerability modelling, risk of failure for industrial structures (metal structures and structural resilience provided by plastic adaptation. Simplified models are proposed to describe the run-up and wave height attenuation in case of tsunamis. The results are calibrated in the case of important tsunamis having taken place in Asian region. The mechanical vulnerability of cylindrical metal tanks erected near the shoreline is also investigated. The fragility curves are then developed in order to describe the multimodal failure: overturning, rupture of anchorages and sliding, buoyancy, excessive bending effects or buckling. Corresponding fragility curves are developed under various conditions: height of tsunami waves, filling ratios and service conditions of the tanks, friction tank/ground as well as dimensions effects. Probabilistic description of the natural hazard and the fragility curves are presented. Sensitivity analysis is also performed in order to investigate the effect of various governing parameters. Furthermore, resilience concepts and metrics are proposed. Theoretical description of the damages and post-disaster recovery functions are discussed: plastic adaptation as well as elastic and plastic attractors.

Broadband computation of the scattering coefficients of infinite arbitrary cylinders.

Science.gov (United States)

Blanchard, Cédric; Guizal, Brahim; Felbacq, Didier

2012-07-01

We employ a time-domain method to compute the near field on a contour enclosing infinitely long cylinders of arbitrary cross section and constitution. We therefore recover the cylindrical Hankel coefficients of the expansion of the field outside the circumscribed circle of the structure. The recovered coefficients enable the wideband analysis of complex systems, e.g., the determination of the radar cross section becomes straightforward. The prescription for constructing such a numerical tool is provided in great detail. The method is validated by computing the scattering coefficients for a homogeneous circular cylinder illuminated by a plane wave, a problem for which an analytical solution exists. Finally, some radiation properties of an optical antenna are examined by employing the proposed technique.

Emergy-based comparative analysis of energy intensity in different industrial systems.

Science.gov (United States)

Liu, Zhe; Geng, Yong; Wang, Hui; Sun, Lu; Ma, Zhixiao; Tian, Xu; Yu, Xiaoman

2015-12-01

With the rapid economic development, energy consumption of China has been the second place in the world next to the USA. Usually, measuring energy consumption intensity or efficiency applies heat unit which is joule per gross domestic production (GDP) or coal equivalent per GDP. However, this measuring approach is only oriented by the conversion coefficient of heat combustion which does not match the real value of the materials during their formation in the ecological system. This study applied emergy analysis to evaluate the energy consumption intensity to fill this gap. Emergy analysis is considered as a bridge between ecological system and economic system, which can evaluate the contribution of ecological products and services as well as the load placed on environmental systems. In this study, emergy indicator for performing energy consumption intensity of primary energy was proposed. Industrial production is assumed as the main contributor of energy consumption compared to primary and tertiary industries. Therefore, this study validated this method by investigating the two industrial case studies which were Dalian Economic Development Area (DEDA) and Fuzhou economic and technological area (FETA), to comparatively study on their energy consumption intensity between the different kinds of industrial systems and investigate the reasons behind the differences. The results show that primary energy consumption (PEC) of DEDA was much higher than that of FETA during 2006 to 2010 and its primary energy consumption ratio (PECR) to total emergy involvement had a dramatically decline from year 2006 to 2010. In the same time, nonrenewable energy of PEC in DEDA was also much higher than that in FETA. The reason was that industrial structure of DEDA was mainly formed by heavy industries like petro-chemistry industry, manufacturing industries, and high energy-intensive industries. However, FETA was formed by electronic business, food industry, and light industries. Although

Two-loop matching coefficients for heavy quark currents

International Nuclear Information System (INIS)

Kniehl, B.A.; Onishchenko, A.; Petersburg Nuclear Physics Institute, Gatchina; Piclum, J.H.; Karlsruhe Univ.; Steinhauser, M.

2006-04-01

In this paper we consider the matching coefficients up to two loops between Quantum Chromodynamics (QCD) and Non-Relativistic QCD (NRQCD) for the vector, axial-vector, scalar and pseudo-scalar currents. The structure of the effective theory is discussed and analytical results are presented. Particular emphasis is put on the singlet diagrams. (Orig.)

Glass-ceramics with multibarrier structure obtained from industrial waste

Energy Technology Data Exchange (ETDEWEB)

Berzina, L.; Cimdins, R.; Rozenstrauha, I. [Riga Tech. Univ. (Latvia). Fac. of Chem. Technol.; Bossert, J. [Technisches Inst.: Materialwissenschaft, Friedrich-Schiller-Univ., Jena (Germany); Kravtchenko, I. [Inst. for Problems of Material Science, Kiev (Ukraine)

1997-12-31

Recycling problem for various kind of waste is solved by processing the waste to ecological depositable products with multibarrier structure. In order to form a multibarrier structure the ecologically incompatible substances may be diluted and chemically bound until their recycling products gain a structure like natural mineral or glass (I. barrier). After that, remineralized materials are converted into a new product by melting or powder technology using an ecological compatible type of waste as a matrix phase (II. barrier). Waste which are treated this way could be applied to produce ceramic building materials and goods such as floor tiles, stone pavement and casting products. Industrial waste from the metallurgical factory in Latvia ``Liepajas metalurgs`` are metallurgical slag, filter dust, etching waste and sewage used in technologies. The main constituents of chemical compositions of these waste are: Fe, Ca, Si, Mg, Al, Mn etc. In some types of waste a small amount of ecologically risky elements such as Cr, Ni, Zr, Sn and Pb can occur. The combination of metallurgical waste with peat ashes from Riga thermal power station, oil shale ashes or glass waste under controlled sintering procedure gives bulk materials with surface or/and bulkcrystallization. The structure of glass-ceramics built this way may prevent the migration of ecologically risky elements into environment due to corrosion or friction. Physical-chemical properties and thermal behaviour (DTA, dilatometry, melting) of waste define the range of sintering for production of glass-ceramics (powder technology) and decorative glass-ceramic materials (melting and powder technology). (orig.) 5 refs.

Establishing a Nuclear Industrial Structure The Spanish Case

International Nuclear Information System (INIS)

Palacios, L.

1989-01-01

Nuclear industry is nationalistic all over the world. This fact is at first glance rather surprising, since one would guess that the localization drive should start with segments of industry of a less sophisticated nature. The reason probably lies on the fact that nuclear disciplines are new and can be conceived as an easier task for planners than other techniques where industrial relationships are already established. The process of increasing domestic content has important implications and crucial decisions have to be made. A general process of technology transfer has to be assured, investments have to be made in new plant and a sizable number of engineers and technicians has to be trained. Technology transfer in the nuclear field seems to be the practical extent dictated by the availability of raw materials and the economy of scale for some components. Table V lists the content achieved in specific classes of equipment. The process has been successful and has enabled Spanish Industry to be present in the world market. Countries embarking in similar programs have expressed interest in the Spanish process as representative of medium development industry that, by determination and serious work, has achieved an advanced status, overcoming deficiencies that are not normally encountered in more developed societies. Spanish Industry is of course ready to share its experience with interested parties, thus contributing to orient local industries by advising them on the successes achieved as an example to follow, and the mistakes made, to prevent occurrence

3-loop heavy flavor Wilson coefficients in deep-inelastic scattering

Energy Technology Data Exchange (ETDEWEB)

Ablinger, J.; Hasselhuhn, A.; Schneider, C. [Johannes-Kepler-Univ. Linz (Austria). RISC; Behring, A.; Bluemlein, J.; Freitas, A. de; Raab, C.; Round, M. [Deutsches Elektronen-Synchrotron (DESY), Zeuthen (Germany); Manteuffel, A. von [Mainz Univ. (Germany). PRISMA Cluster of Excellence; Wissbrock, F. [Johannes-Kepler-Univ. Linz (Austria). RISC; Deutsches Elektronen-Synchrotron (DESY), Zeuthen (Germany); IHES Institut des Hautes Etudes Scientifiques, Bures-sur-Yvette (France)

2014-09-15

We present our most recent results on the calculation of the heavy flavor contributions to deep-inelastic scattering at 3-loop order in the large Q{sup 2} limit, where the heavy flavor Wilson coefficients are known to factorize into light flavor Wilson coefficients and massive operator matrix elements. We describe the different techniques employed for the calculation and show the results in the case of the heavy flavor non-singlet and pure singlet contributions to the structure function F{sub 2}(x,Q{sup 2}).

Evaluating the coefficient of thermal expansion using time periods of minimal thermal gradient for a temperature driven structural health monitoring

Science.gov (United States)

Reilly, J.; Abdel-Jaber, H.; Yarnold, M.; Glisic, B.

2017-04-01

Structural Health Monitoring aims to characterize the performance of a structure from a combination of recorded sensor data and analytic techniques. Many methods are concerned with quantifying the elastic response of the structure, treating temperature changes as noise in the analysis. While these elastic profiles do demonstrate a portion of structural behavior, thermal loads on a structure can induce comparable strains to elastic loads. Understanding this relationship between the temperature of the structure and the resultant strain and displacement can provide in depth knowledge of the structural condition. A necessary parameter for this form of analysis is the Coefficient of Thermal Expansion (CTE). The CTE of a material relates the amount of expansion or contraction a material undergoes per degree change in temperature, and can be determined from temperature-strain relationship given that the thermal strain can be isolated. Many times with concrete, the actual amount of expansion with temperature in situ varies from the given values for the CTE due to thermally generated elastic strain, which complicates evaluation of the CTE. To accurately characterize the relationship between temperature and strain on a structure, the actual thermal behavior of the structure needs to be analyzed. This rate can vary for different parts of a structure, depending on boundary conditions. In a case of unrestrained structures, the strain in the structure should be linearly related to the temperature change. Thermal gradients in a structure can affect this relationship, as they induce curvature and deplanations in the cross section. This paper proposes a method that addresses these challenges in evaluating the CTE.

Recurrence relations between transformation coefficients of hyperspherical harmonics and their application to Moshinsky coefficients

International Nuclear Information System (INIS)

Raynal, J.

1976-01-01

Closed formulae and recurrence relations for the transformation of a two-body harmonic oscillator wave function to the hyperspherical formalism are given. With them Moshinsky or Smirnov coefficients are obtained from the transformation coefficients of hyperspheric harmonics. For these coefficients the diagonalization method of Talman and Lande reduces to simple recurrence relations which can be used directly to compute them. New closed formulae for these coefficients are also derived: they are needed to compute the two simplest coefficients which determine the sign for the recurrence relation. (Auth.)

The structure, regulation, and performance of pension funds in nine industrial countries

OpenAIRE

Davis, E.P.; DEC

1993-01-01

The author offers an overview of issues relating to the development of funded pension schemes in industrial countries. The analysis applies the economic theory of pension regulation to experience with the structure, regulation, and performance of funds in nine countries - Canada, Denmark, Germany, Japan, Netherlands, Sweden, Switzerland, the United Kingdom, and the United States - seeking to shed light on the finance of old age security in developing countries and the reform of pension funds ...

Comparison of field-measured radon diffusion coefficients with laboratory-measured coefficients

International Nuclear Information System (INIS)

Lepel, E.A.; Silker, W.B.; Thomas, V.W.; Kalkwarf, D.R.

1983-04-01

Experiments were conducted to compare radon diffusion coefficients determined for 0.1-m depths of soils by a steady-state method in the laboratory and diffusion coefficients evaluated from radon fluxes through several-fold greater depths of the same soils covering uranium-mill tailings. The coefficients referred to diffusion in the total pore volume of the soils and are equivalent to values for the quantity, D/P, in the Generic Environmental Impact Statement on Uranium Milling prepared by the US Nuclear Regulatory Commission. Two soils were tested: a well-graded sand and an inorganic clay of low plasticity. For the flux evaluations, radon was collected by adsorption on charcoal following passive diffusion from the soil surface and also from air recirculating through an aluminum tent over the soil surface. An analysis of variance in the flux evaluations showed no significant difference between these two collection methods. Radon diffusion coefficients evaluated from field data were statistically indistinguishable, at the 95% confidence level, from those measured in the laboratory; however, the low precision of the field data prevented a sensitive validation of the laboratory measurements. From the field data, the coefficients were calculated to be 0.03 +- 0.03 cm 2 /s for the sand cover and 0.0036 +- 0.0004 cm 2 /s for the clay cover. The low precision in the coefficients evaluated from field data was attributed to high variation in radon flux with time and surface location at the field site

Electric Power Consumption Coefficients for U.S. Industries: Regional Estimation and Analysis

Energy Technology Data Exchange (ETDEWEB)

Boero, Riccardo [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

2017-07-21

Economic activity relies on electric power provided by electrical generation, transmission, and distribution systems. This paper presents a method developed at Los Alamos National Laboratory to estimate electric power consumption by different industries in the United States. Results are validated through comparisons with existing literature and benchmarking data sources. We also discuss the limitations and applications of the presented method, such as estimating indirect electric power consumption and assessing the economic impact of power outages based on input-output economic models.

Projects Delay Factors of Saudi Arabia Construction Industry Using PLS-SEM Path Modelling Approach

Directory of Open Access Journals (Sweden)

Abdul Rahman Ismail

2016-01-01

Full Text Available This paper presents the development of PLS-SEM Path Model of delay factors of Saudi Arabia construction industry focussing on Mecca City. The model was developed and assessed using SmartPLS v3.0 software and it consists of 37 factors/manifests in 7 groups/independent variables and one dependent variable which is delay of the construction projects. The model was rigorously assessed at measurement and structural components and the outcomes found that the model has achieved the required threshold values. At structural level of the model, among the seven groups, the client and consultant group has the highest impact on construction delay with path coefficient β-value of 0.452 and the project management and contract administration group is having the least impact to the construction delay with β-value of 0.016. The overall model has moderate explaining power ability with R2 value of 0.197 for Saudi Arabia construction industry representation. This model will able to assist practitioners in Mecca city to pay more attention in risk analysis for potential construction delay.

A view on thermodynamics of concentrated electrolytes: Modification necessity for electrostatic contribution of osmotic coefficient

Science.gov (United States)

Sahu, Jyoti; Juvekar, Vinay A.

2018-05-01

Prediction of the osmotic coefficient of concentrated electrolytes is needed in a wide variety of industrial applications. There is a need to correctly segregate the electrostatic contribution to osmotic coefficient from nonelectrostatic contribution. This is achieved in a rational way in this work. Using the Robinson-Stokes-Glueckauf hydrated ion model to predict non-electrostatic contribution to the osmotic coefficient, it is shown that hydration number should be independent of concentration so that the observed linear dependence of osmotic coefficient on electrolyte concentration in high concentration range could be predicted. The hydration number of several electrolytes (LiCl, NaCl, KCl, MgCl2, and MgSO4) has been estimated by this method. The hydration number predicted by this model shows correct dependence on temperature. It is also shown that the electrostatic contribution to osmotic coefficient is underpredicted by the Debye-Hückel theory at concentration beyond 0.1 m. The Debye-Hückel theory is modified by introducing a concentration dependent hydrated ionic size. Using the present analysis, it is possible to correctly estimate the electrostatic contribution to the osmotic coefficient, beyond the range of validation of the D-H theory. This would allow development of a more fundamental model for electrostatic interaction at high electrolyte concentrations.

A parameterization scheme for the x-ray linear attenuation coefficient and energy absorption coefficient.

Science.gov (United States)

Midgley, S M

2004-01-21

A novel parameterization of x-ray interaction cross-sections is developed, and employed to describe the x-ray linear attenuation coefficient and mass energy absorption coefficient for both elements and mixtures. The new parameterization scheme addresses the Z-dependence of elemental cross-sections (per electron) using a simple function of atomic number, Z. This obviates the need for a complicated mathematical formalism. Energy dependent coefficients describe the Z-direction curvature of the cross-sections. The composition dependent quantities are the electron density and statistical moments describing the elemental distribution. We show that it is possible to describe elemental cross-sections for the entire periodic table and at energies above the K-edge (from 6 keV to 125 MeV), with an accuracy of better than 2% using a parameterization containing not more than five coefficients. For the biologically important elements 1 coefficients. At higher energies, the parameterization uses fewer coefficients with only two coefficients needed at megavoltage energies.

Risk assessment and early warning systems for industrial facilities in seismic zones

International Nuclear Information System (INIS)

Salzano, Ernesto; Garcia Agreda, Anita; Di Carluccio, Antonio; Fabbrocino, Giovanni

2009-01-01

Industrial equipments and systems can suffer structural damage when hit by earthquakes, so that accidental scenarios as fire, explosion and dispersion of toxic substances can take place. As a result, overall damage to people, environment and properties increases. The present paper deals with seismic risk analysis of industrial facilities where atmospheric storage tanks (anchored or unanchored to ground), horizontal pressurised tanks, reactors and pumps are installed. Simplified procedures and methodologies based on historical database and literature data on natural-technological (Na-Tech) accidents for seismic risk assessment are discussed. Equipment-specific fragility curves have been thus derived depending on a single earthquake measure, peak ground acceleration (PGA). Fragility parameters have been then transformed to linear probit coefficients in order to obtain reliable threshold values for earthquake intensity measure, both for structural damage and loss of containment. These threshold values are of great interest when development of active and passive mitigation actions and systems, safety management, and the implementation of early warning system are concerned. The approach is general and can be implemented in any available code or procedure for risk assessment. Some results of seismic analysis of atmospheric storage tanks are also presented for validation.

The structural configurations of alcohol in Denmark: Policy, culture, and industry

DEFF Research Database (Denmark)

Demant, Jakob Johan; Krarup, Troels

2013-01-01

, based on liberalization. A particular adolescent alcohol culture of intoxication, however, emerged in the 1990s, raising public awareness and calls for policy intervention. Contrary to what may have been expected, this did not represent a break with the liberal alcohol configuration in policy, culture......This article analyzes recent developments in Danish alcohol policy, culture, and industry. It reveals cross-sector dynamics and complexities that are often downplayed in existing literature. It traces how a stable “structural configuration” emerged in the 1960s-1980s between the three domains...

Determining the surface roughness coefficient by 3D Scanner

Directory of Open Access Journals (Sweden)

Karmen Fifer Bizjak

2010-12-01

Full Text Available Currently, several test methods can be used in the laboratory to determine the roughness of rock joint surfaces.However, true roughness can be distorted and underestimated by the differences in the sampling interval of themeasurement methods. Thus, these measurement methods produce a dead zone and distorted roughness profiles.In this paper a new rock joint surface roughness measurement method is presented, with the use of a camera-typethree-dimensional (3D scanner as an alternative to current methods. For this study, the surfaces of ten samples oftuff were digitized by means of a 3D scanner, and the results were compared with the corresponding Rock JointCoefficient (JRC values. Up until now such 3D scanner have been mostly used in the automotive industry, whereastheir use for comparison with obtained JRC coefficient values in rock mechanics is presented here for the first time.The proposed new method is a faster, more precise and more accurate than other existing test methods, and is apromising technique for use in this area of study in the future.

Rational design and synthesis of an orally bioavailable peptide guided by NMR amide temperature coefficients

Science.gov (United States)

Wang, Conan K.; Northfield, Susan E.; Colless, Barbara; Chaousis, Stephanie; Hamernig, Ingrid; Lohman, Rink-Jan; Nielsen, Daniel S.; Schroeder, Christina I.; Liras, Spiros; Price, David A.; Fairlie, David P.; Craik, David J.

2014-01-01

Enhancing the oral bioavailability of peptide drug leads is a major challenge in drug design. As such, methods to address this challenge are highly sought after by the pharmaceutical industry. Here, we propose a strategy to identify appropriate amides for N-methylation using temperature coefficients measured by NMR to identify exposed amides in cyclic peptides. N-methylation effectively caps these amides, modifying the overall solvation properties of the peptides and making them more membrane permeable. The approach for identifying sites for N-methylation is a rapid alternative to the elucidation of 3D structures of peptide drug leads, which has been a commonly used structure-guided approach in the past. Five leucine-rich peptide scaffolds are reported with selectively designed N-methylated derivatives. In vitro membrane permeability was assessed by parallel artificial membrane permeability assay and Caco-2 assay. The most promising N-methylated peptide was then tested in vivo. Here we report a novel peptide (15), which displayed an oral bioavailability of 33% in a rat model, thus validating the design approach. We show that this approach can also be used to explain the notable increase in oral bioavailability of a somatostatin analog. PMID:25416591

Determinants of Iran’s Bilateral Intra-industry Trade in Pharmaceutical Industry

Science.gov (United States)

Aghlmand, Siamak; Rahimi, Bahlol; Farrokh-Eslamlou, Hamidreza; Nabilou, Bahram; Yusefzadeh, Hassan

2018-01-01

Among non-oil and in trade arena, drug has always been strategic importance and most government especially industrialized countries pay special attention to its production and trade issues. Thus, having a comprehensive view from economic perspective to this section is essential for suggesting intervention. This was a descriptive-analytical and panel study. In this study, gravity model is used to estimate Iran’s bilateral intra-industry trade in pharmaceutical products in the 2001-2012 periods. To illustrate the extent of pharmaceutical’s intra-industry trade between Iran and its major trading partners, the explanatory variables of market size, income, factor endowments, distance, cultural contributions, and similarities and also special trade arrangements have been applied. Analysis of factors affecting Iran’s bilateral intra-industry trade in pharmaceutical industry showed that the average GDP and cultural similarities had a significant positive impact on Iran’s bilateral IIT, while the difference in GDP has a negative and significant effect. Coefficients obtained for the geographical distance and the average ratio of total capital to the labor force is not consistent with theoretical expectations. Special trade arrangements did not have significant impact on the extent of bilateral intra-industry trade between Iran and its trading partners. The knowledge of the intra-industry trade between Iran and its trade partners make integration between the countries. Factors affecting this type of trade pattern underlie its development in trade relationship. Therefore, the findings of this study would be useful in helping to develop and implement policies for the expansion of the pharmaceutical trade. PMID:29881438

Rate coefficients of open shell molecules and radicals: R-matrix ...

Indian Academy of Sciences (India)

2017-04-07

Apr 7, 2017 ... Rate coefficients of open shell molecules and radicals: R-matrix method. JASMEET SINGH1 ... lasers, study of structure of DNA and astrophysics which require a ..... [6] CCPForge, http://ccpforge.cse.rl.ac.uk/projects/ukrmol-in/.

Structural analysis of the Danish windmill industry. Strukturanalyse af dansk vindmoelleindustri

Energy Technology Data Exchange (ETDEWEB)

1988-09-15

Most Danish windmill manufacturers have experienced a grave economic crisis during the last three years. In 1987, the total windmill industry in this country ran at a loss of 40 million Danish crowns where the turnover was 550 million crowns. Danish firms are too small and seem to lack professional management. Production costs are too high and there is an urgent need for structural rationalization. Danish windmills cannot at the present time compete with the foreign market, largely because of lack of marketing know-how and financial backing. Yet today, many countries energy policies include the development of renewable energy resources, especially in the case of wind power. This should mean that the world market for windmills will increase, but so will the number of foreign competitors. The authors suggest the merging of Danish windmill manufacturing firms, and these mergers should include corporations that produce electricity. Possibilities for raising financial backing for running costs and export activities are mentioned, and ideas for rationalizing and reconstructing the whole Danish windmill industry are described in detail. (AB).

Weyl q-coefficients for uq(3) and Racah q -coefficients for suq(2)

International Nuclear Information System (INIS)

Asherova, R.M.; Smirnov, Yu.F.; Tolstoy, V.N.

1996-01-01

With the aid of the projection-operator technique, the general analytic expression for the elements of the matrix that relates the U and T bases of an arbitrary finite-dimensional irreducible representation of the uq(3) quantum algebra (Weyl q-coefficients) is obtained for the case where the deformation parameter q is not equal to a square root of unity. The procedure for resummation of q-factorial expressions is used to prove that, modulo phase factors, these Weyl q-coefficients coincide with Racah q-coefficients for the suq(2) quantum algebra. It is also shown that, on the basis of one general formula, the q-analogs of all known general analytic expressions for the 6j symbols (and Racah coefficients) of the Lie algebras of the angular momentum can be obtained by using this resummation procedure. The symmetry properties of these q coefficients are discussed. The result is formulated in the following way: the general formulas for the q-6j symbols (Racah q-coefficients) of the suq(2) quantum algebra are obtained from the general formulas for the conventional 6j symbols (Racah coefficients) of the su(2) Lie algebra by replacing directly all factorials with q-factorials, the symmetry properties of the q-6j symbols being completely coincident with the symmetry properties of the conventional 6j symbols

The optimal vertical structure in the electricity industry when the incumbent has a cost advantage

International Nuclear Information System (INIS)

Kurakawa, Yukihide

2013-01-01

This paper studies how the vertical structure of the electricity industry affects the social welfare when the incumbent has a cost advantage in generation relative to the entrants. The model consists of a generation sector and a transmission sector. In the generation sector the incumbent and entrants compete in a Cournot fashion taking as given the access charge to the transmission network set in advance by the regulator to maximize the social welfare. Two vertical structures, integration and separation, are considered. Under vertical separation the transmission network is established as an organization independent of every generator, whereas under vertical integration it is a part of the incumbent's organization. The optimal vertical structure is shown to depend on the number of entrants. If the number of entrants is smaller than a certain threshold, vertical separation is superior in welfare to vertical integration, and vice versa. This is because the choice of vertical structure produces a trade-off in the effects on competition promotion and production efficiency. If a break-even constraint is imposed in the transmission sector, however, vertical integration is shown to be always superior in welfare. - Highlights: • We examine the optimal vertical structure in the electricity industry. • We model a generation sector in which the incumbent has a cost advantage. • A trade-off between production efficiency and competition promotion occurs. • The optimal vertical structure depends on the number of entrants. • Vertical integration is always superior if a break-even constraint is imposed

The Truth About Ballistic Coefficients

OpenAIRE

Courtney, Michael; Courtney, Amy

2007-01-01

The ballistic coefficient of a bullet describes how it slows in flight due to air resistance. This article presents experimental determinations of ballistic coefficients showing that the majority of bullets tested have their previously published ballistic coefficients exaggerated from 5-25% by the bullet manufacturers. These exaggerated ballistic coefficients lead to inaccurate predictions of long range bullet drop, retained energy and wind drift.

NGA-West 2 GMPE average site coefficients for use in earthquake-resistant design

Science.gov (United States)

Borcherdt, Roger D.

2015-01-01

Site coefficients corresponding to those in tables 11.4–1 and 11.4–2 of Minimum Design Loads for Buildings and Other Structures published by the American Society of Civil Engineers (Standard ASCE/SEI 7-10) are derived from four of the Next Generation Attenuation West2 (NGA-W2) Ground-Motion Prediction Equations (GMPEs). The resulting coefficients are compared with those derived by other researchers and those derived from the NGA-West1 database. The derivation of the NGA-W2 average site coefficients provides a simple procedure to update site coefficients with each update in the Maximum Considered Earthquake Response MCER maps. The simple procedure yields average site coefficients consistent with those derived for site-specific design purposes. The NGA-W2 GMPEs provide simple scale factors to reduce conservatism in current simplified design procedures.

The Swiss automobile industry - Situation, structure, trends, challenges and chances; Automobilindustrie Schweiz. Branchenanalyse 2008

Energy Technology Data Exchange (ETDEWEB)

Schulze, A.

2008-07-01

This paper presented at the Swiss 2008 research conference on traffic takes a look at the situation of the Swiss automobile industry in 2008. The results of the study are presented and include figures on the automobile industry, its history, structure, turn-over, employment and its position from the international point of view. Research and development in the sector, investments and challenges faced are discussed. The products and services offered are looked at and the relevant strategies examined. The sector's competitive environment and possibilities for growth are looked at and the advantages offered by strategic partnerships and geographical location are noted. Finally, interviews with important actors in the business are presented.

Economic governance in the Chinese PV industry: Structural and individual factors influencing market development

Directory of Open Access Journals (Sweden)

Gruss, Laura

2015-03-01

Full Text Available Since the beginning of the new millennium, the global production of photovoltaic (PV modules has been experiencing a rapid growth. In 2008, China already had 50 times more producers than in 2001 and three Chinese companies ranked amongst the top 10 PV producers worldwide. However, overcapacities and international trade disputes have challenged the success story of the Chinese PV industry. In order to try to tackle the mechanisms which have fostered the overall development of the Chinese PV industry since the 2000s, I have conducted a qualitative case study on Chinese PV modules producers. Following the logic of a qualitative research design, theories on cluster development have been used as an analytical device for structuring the causal narrative. In a circular research process design, structural factors, such as local growth fetishism and rebalancing, as well as individual factors, such as herd behaviour and wishful thinking, have been identified as drivers along the line of the life cycle of clusters. In this respect, this paper contests the still popular idea of the Chinese central government as the omnipotent and rational director of the Chinese economy and takes the consequences of past decentralization policies as well as bounded rationality into consideration. Since the political emphasis of regional development for global competitiveness had similar policy effects in different countries, the findings call for a context sensitive comparison between industries and countries.

Barriers to implement green supply chain management in automobile industry using interpretive structural modeling technique: An Indian perspective

Directory of Open Access Journals (Sweden)

Sunil Luthra

2011-07-01

Full Text Available Purpose: Green Supply Chain Management (GSCM has received growing attention in the last few years. Most of the automobile industries are setting up their own manufacturing plants in competitive Indian market. Due to public awareness, economic, environmental or legislative reasons, the requirement of GSCM has increased.  In this context, this study aims to develop a structural model of the barriers to implement GSCM in Indian automobile industry.Design/methodology/approach: We have identified various barriers and contextual relationships among the identified barriers. Classification of barriers has been carried out based upon dependence and driving power with the help of MICMAC analysis. In addition to this, a structural model of barriers to implement GSCM in Indian automobile industry has also been put forward using Interpretive Structural Modeling (ISM technique. Findings: Eleven numbers of relevant barriers have been identified from literature and subsequent discussions with experts from academia and industry. Out of which, five numbers of barriers have been identified as dependent variables; three number of barriers have been identified as the driver variables and three number of barriers have been identified as the linkage variables. No barrier has been identified as autonomous variable. Four barriers have been identified as top level barriers and one bottom level barrier. Removal of these barriers has also been discussed.Research limitations/implications: A hypothetical model of these barriers has been developed based upon experts’ opinions. The conclusions so drawn may be further modified to apply in real situation problem. Practical implications: Clear understanding of these barriers will help organizations to prioritize better and manage their resources in an efficient and effective way.Originality/value: Through this paper we contribute to identify the barriers to implement GSCM in Indian automobile industry and to prioritize them

Development of database on the distribution coefficient. 1. Collection of the distribution coefficient data

Energy Technology Data Exchange (ETDEWEB)

Takebe, Shinichi; Abe, Masayoshi [Japan Atomic Energy Research Inst., Tokai, Ibaraki (Japan). Tokai Research Establishment

2001-03-01

The distribution coefficient is very important parameter for environmental impact assessment on the disposal of radioactive waste arising from research institutes. The literature survey in the country was mainly carried out for the purpose of selecting the reasonable distribution coefficient value on the utilization of this value in the safety evaluation. This report was arranged much informations on the distribution coefficient for inputting to the database for each literature, and was summarized as a literature information data on the distribution coefficient. (author)

A new methodology for predicting flow induced vibration in industrial components

International Nuclear Information System (INIS)

Gay, N.

1997-12-01

Flow induced vibration damage is a major concern for designers and operators of industrial components. For example, nuclear power plant operators have currently to deal with such flow induced vibration problems, in steam generator tube bundles, control rods or nuclear fuel assemblies. Some methodologies have thus been recently proposed to obtain an accurate description of the flow induced vibration phenomena. These methodologies are based on unsteady semi-analytical models for fluid-dynamic forces, associated with non-dimensional fluid force coefficients generally obtained from experiments. The aim is to determine the forces induced by the flow on the structure, and then to take account of these forces to derive the dynamic behaviour of the component under flow excitation. The approach is based on a general model for fluid-dynamic forces, using several non-dimensional parameters that cannot be reached through computation. These parameters are then determined experimentally on simplified test sections, representative of the component, of the flow and of the fluid-elastic coupling phenomena. Predicting computations of the industrial component can then be performed for various operating configurations, by applying laws of similarity. The major physical mechanisms involved in complex fluid-structure interaction phenomena have been understood and modelled. (author)

Condition Assessment of the Timber Structures of a Century-Old Industrial Building Using a Nondestructive Inspection Procedure

Science.gov (United States)

Xiping Wang; Marko Teder; James Wacker

2013-01-01

This paper reports an in situ inspection project conducted on heavy timber structures of a century-old industrial building at a paper manufacturing facility. A nondestructive inspection procedure was employed to evaluate the true condition of the heavy timbers that serve as the main framing structure of the building. The on-site investigation involved monitoring of the...

Optimizing the Regional Industrial Structure Based on the Environmental Carrying Capacity: An Inexact Fuzzy Multi-Objective Programming Model

Directory of Open Access Journals (Sweden)

Wenyi Wang

2013-12-01

Full Text Available An inexact fuzzy multi-objective programming model (IFMOP based on the environmental carrying capacity is provided for industrial structure optimization problems. In the IFMOP model, both fuzzy linear programming (FLP and inexact linear programming (ILP methods are introduced into a multi-objective programming framework. It allows uncertainties to be directly communicated into the problem solving processing, and it can effectively reflect the complexity and uncertainty of an industrial system without impractical simplification. The two objective functions utilized in the optimization study are the maximum total output value and population size, and the constraints include water environmental capacity, water resource supply, atmospheric environmental capacity and energy supply. The model is subsequently employed in a realistic case for industrial development in the Tongzhou district, Beijing, China. The results demonstrate that the model can help to analyze whether the environmental carrying capacity of Tongzhou can meet the needs of the social economic objectives in the new town plan in the two scenarios and can assist decision makers in generating stable and balanced industrial structure patterns with consideration of the resources, energy and environmental constraints to meet the maximum social economic efficiency.

Determination of radioactivity in and radon emanation coefficient of selected building materials and estimation of radiation exposure from their use

International Nuclear Information System (INIS)

Paredes, C.H.

1984-01-01

Building materials commonly used in the construction industry and those that were manufactured with waste products of the phosphate industry, and phosphate ores were examined for radioactivity content. Each material was analyzed for Ra-226, Ra-228, and K-40 by gamma-ray spectrometry. The measured radionuclide concentrations for the building materials examined ranged from 0.2-3.9 pCi g -1 for Ra-226, 0.3-1.8 pCi g -1 for Ra-228, and 2.3-37 pCi g -1 for K-40. Waste products of elemental phosphorus manufacture had activity concentrations that ranged from 4.2-54 pCi g -1 for Ra-226, 0.3-1.0 pCi g -1 for Ra-228, and 1.4-6.6 pCi g -1 for K-40. The activity concentrations for phosphate ores from Tennessee and Montana were 5.3 and 36 pCi g -1 for Ra-226, 0.5 and 0.6 pCi g -1 for Ra-228, and 4.8 and 9.0 pCi g -1 for K-40, respectively. The emanation coefficients for the building materials examined ranged from 6.86 x 10 -4 - 5.99 x 10 -2 . Those for the waste products of the phosphate industry ranged from 2.21 x 10 -4 - 3.06 x 10 -2 . The phosphate ores had emanation coefficients in the order of 10 -2 . The emanation coefficients for mineral wool and wall-board slightly increased when measured at a relative humidity of 100% instead of 0%. No dependence of emanation coefficient on humidity was observed for Tenn. phosphate slag

Recommendations for joint fatigue coefficients for welded P91 junctions at 550 °C

Energy Technology Data Exchange (ETDEWEB)

Matheron, P., E-mail: philippe.matheron@cea.fr; Aiello, G.; Ancelet, O.; Forest, L.

2016-04-15

Modified 9Cr1Mo steels are potential candidates as structural materials of GEN-IV nuclear reactors. Since the design of structural components is influenced by the presence of the welds, their mechanical properties are also included in the design codes. In the European code RCC-MRx, a weld is considered as a homogeneous (base metal) component with a margin coefficient, called weld coefficient. Currently no values of joint fatigue coefficients for P91 junctions are given in RCC-MRx. After a recall of the weld design rules contained in the code, this work presents the experimental activities carried out to characterize the fatigue behaviour of TIG welded P91 junctions at high temperatures. Finite elements calculations were performed on the basis of the characterization of the base and weld metal. The results of the tests validate the numerical results. Values of the weld joint fatigue coefficients for P91 are proposed for possible inclusion in RCC-MRx.

Determination of distribution coefficient (Kd's) of some artificial and naturally occurring radionuclide in fresh and marine coastal water sediment

International Nuclear Information System (INIS)

Al-Masri, M. S.; Mamish, S; Haleem, M. A.

2004-12-01

Distribution coefficients of artificial and natural radionuclides in fresh and marine water sediment are used in modeling radionuclide dispersion in water system, and the radiation risk and environmental investigating of impact of radioactive emissions, due to routine operations of nuclear plants or disposal and burial of radioactive waste in the environment. In the present work, distribution coefficient of uranium, lead, polonium, radium (naturally occurring radionuclides that may be emitted into the Syrian environment by the phosphate and oil industry with relatively high concentrations) and caesium 137 and strontium 85, in fresh water sediment (Euphrates River, Orantos River and Mzzerib Lake) and marine coastal water (Lattakia, Tartous and Banias). Distribution coefficients were found to vary between (5.8-17.18)*10 3 , (2.2-8.11)*10 3 , (0.22-2.08)*10 3 , (0.16-0.19)*10 3 , (0.38-0.69)*10 3 and 49-312 for polonium, lead, uranium, radium, cesium and strontium respectively. Results have indicated that most measurement distribution coefficients in the present study were lower than those values reported in IAEA documents for marine coastal sediment. In addition, variations of Kd's with aqueous phase composition and sediment elemental and mineralogical composition and its total organic materials content have been studied, where liner correlation coefficients for each isotope with different parameters have been determined. The obtained data reported in this study can be used for radioactive contaminants dispersion and transfer in Syrian river, lake and coast to assess risks to public due to discharges of the phosphate and oil industry into the Syrian environment. (Authors)

Reliability of structures of industrial installations. Theory and applications of probabilistic mechanics

International Nuclear Information System (INIS)

Procaccia, H.; Morilhat, P.; Carle, R.; Menjon, G.

1996-01-01

The management of the service life of mechanical materials implies an evaluation of their risk of failure during their use. To evaluate this risk the following methods are used: the classical frequency statistics applied to experience feedback data concerning failures noticed during operation of active parts (pumps, valves, exchangers, circuit breakers etc..); the Bayesian approach in the case of scarce statistical data and when experts are needed to compensate the lack of information; the structures reliability approach when no data are available and when a theoretical model of degradation must be used, in particular for passive structures (pressure vessels, pipes, tanks, etc..). The aim of this book is to describe the principles and applications of this third approach to industrial installations. Chapter 1 recalls the historical aspects of the probabilistic approach to the reliability of structures and the existing codes. Chapter 2 presents the level 1 deterministic method applied so far for the conceiving of passive structures. The Cornell reliability index, already used in civil engineering codes, is defined in chapter 3. The Hasofer and Lind reliability index, a generalization of the Cornell index, is defined in chapter 4. Chapter 5 concerns the application of probabilistic approaches to optimization studies with the introduction of the economical variables linked to the risk and the possible actions to limit this risk (in-service inspection, maintenance, repairing etc..). Chapters 6 and 7 describe the Monte Carlo simulation and approximation methods for failure probabilistic calculations, and recall the fracture mechanics basis and the models of load and degradation of industrial installations. Some applications are given in chapter 9 with the cases of the safety margins quantization of a fissured pipe and the optimizing of the in-service inspection policy of a steam generator. Chapter 10 raises the problem of the coupling between mechanical and reliability

Proposed industrial recovered materials utilization targets for the metals and metal-products industry

Energy Technology Data Exchange (ETDEWEB)

None

1979-05-01

The introductory chapter provides a discussion of the factors that affect the recovery and reuse of secondary materials and the competition between the primary and secondary metals industries. It discusses these industries in terms of resource characteristics, industry technology, pollution control requirements, market structure, the economics of recycling, and the issues involved in econometrically estimating scrap supply response behavior. It further presents the methodology established by DOE for the metals, textiles, rubber, and pulp and paper industries. The areas in which government policies might have a significant impact on the utilization of primary and secondary metals and on any recycling targets between now and 1987 are noted. Chapter 3 presents general profiles for the major industrial segments comprising SIC 33. The profiles include such topics as industry structure, process technology, materials and recycling flow, and future trends. Chapter 4 specifically covers the evaluation of recycling targets for the ferrous, aluminum, copper, zinc, and lead industries. (MCW)

The Use of Structure Coefficients to Address Multicollinearity in Sport and Exercise Science

Science.gov (United States)

Yeatts, Paul E.; Barton, Mitch; Henson, Robin K.; Martin, Scott B.

2017-01-01

A common practice in general linear model (GLM) analyses is to interpret regression coefficients (e.g., standardized ß weights) as indicators of variable importance. However, focusing solely on standardized beta weights may provide limited or erroneous information. For example, ß weights become increasingly unreliable when predictor variables are…

Extending the Constant Coefficient Solution Technique to Variable Coefficient Ordinary Differential Equations

Science.gov (United States)

Mohammed, Ahmed; Zeleke, Aklilu

2015-01-01

We introduce a class of second-order ordinary differential equations (ODEs) with variable coefficients whose closed-form solutions can be obtained by the same method used to solve ODEs with constant coefficients. General solutions for the homogeneous case are discussed.

Employment, Pay and Discrimination in the Tourism Industry

OpenAIRE

Luís Delfim Santos; José Varejão

2006-01-01

Using a large administrative matched employer-employee dataset we analyse the gender wage gap in the Portuguese tourism labour market. As background, employment and pay in the tourism industry is thoroughly characterized. Using the Oaxaca-Blinder decomposition of the gender wage gap, we find that 45 percent of the gap is due to differences in attributes of male and female workers in tourism. Our estimate of the coefficient of discrimination in the tourism industry (8.4 percent) puts it well b...

Amide proton temperature coefficients as hydrogen bond indicators in proteins

International Nuclear Information System (INIS)

Cierpicki, Tomasz; Otlewski, Jacek

2001-01-01

Correlations between amide proton temperature coefficients (Δσ HN /ΔT) and hydrogen bonds were investigated for a data set of 793 amides derived from 14 proteins. For amide protons showing temperature gradients more positive than -4.6 ppb/K there is a hydrogen bond predictivity value exceeding 85%. It increases to over 93% for amides within the range between -4 and -1 ppb/K. Detailed analysis shows an inverse proportionality between amide proton temperature coefficients and hydrogen bond lengths. Furthermore, for hydrogen bonds of similar bond lengths, values of temperature gradients in α-helices are on average 1 ppb/K more negative than in β-sheets. In consequence, a number of amide protons in α-helices involved in hydrogen bonds shorter than 2 A show Δσ HN /ΔT 10 helices and 98% in β-turns have temperature coefficients more positive than -4.6ppb/K. Ring current effect also significantly influences temperature coefficients of amide protons. In seven out of eight cases non-hydrogen bonded amides strongly deshielded by neighboring aromatic rings show temperature coefficients more positive than -2 ppb/K. In general, amide proton temperature gradients do not change with pH unless they correspond to conformational changes. Three examples of pH dependent equilibrium showing hydrogen bond formation at higher pH were found. In conclusion, amide proton temperature coefficients offer an attractive and simple way to confirm existence of hydrogen bonds in NMR determined structures

Density dependence of the diffusion coefficient of alkali metals

International Nuclear Information System (INIS)

Adebayo, G.A.; Anusionwu, B.C.; Njah, A.N.; Mathew, B.; Fabamise, O.A.T.

2004-06-01

The effect of density on transport coefficients of liquid Li, Na and K at high temperatures using the method of Molecular Dynamics simulation has been studied. Simulation of these liquid alkali metals were carried out with 800 particles in simulation boxes with periodic boundary conditions imposed. In order to test the reliability of the interatomic potential used in the calculations, experimental data on the structural properties were compared with calculated results. The calculations showed a linear relationship between the density and the diffusion coefficient in all the systems investigated except in lithium, where, due to the small size of the atom, standard molecular dynamics simulation method may not be appropriate for calculating the properties of interest. (author)

Industrial Robots.

Science.gov (United States)

Reed, Dean; Harden, Thomas K.

Robots are mechanical devices that can be programmed to perform some task of manipulation or locomotion under automatic control. This paper discusses: (1) early developments of the robotics industry in the United States; (2) the present structure of the industry; (3) noneconomic factors related to the use of robots; (4) labor considerations…

Experimental measurement of fluid force coefficients for helical tube arrays in air cross flow

International Nuclear Information System (INIS)

Shen Shifang; Liu Reilan

1993-01-01

A helical coil steam generator is extensively used in the High Temperature Gas Cooled Reactor (HTGCR) and Sodium Cooled Reactor (SCR) nuclear power stations because of its compact structure, good heat-exchange, and small volume. The experimental model is established by the structure parameter of 200MW HTGCR. The fluid elastic instability of helical tube arrays in air cross flow is studied in this experiment, and the fluid force coefficients of helical tube arrays having the same notational direction of two adjacent layers in air cross flow are obtained. As compared to the fluid force coefficients of cylinder tube arrays, the fluid force coefficients of helical tube arrays are smaller in the low velocity area, and greater in the high velocity area. The experimental results help the study of the dynamic characteristics of helical tube arrays in air cross flow

IT substitution for energy leads to a resilient structure for a survival strategy of Japan's electric power industry

International Nuclear Information System (INIS)

Watanabe, Chihiro; Kishioka, Miharu; Carvajal, C.A.

2005-01-01

The dramatic surge in information technology (IT) around the world, and an evolving global economy, are subjecting firms to megacompetition. This is the case, particularly in Japan's electric power industry, where the power rate is one of the highest in the world; hence it is noted that Japan's industry has lost its price competitiveness in the world market, resulting in stagnation of production, hence leading to stagnation in power demand. In addition, an increase in trends of customer's preferences and the variety of participants in the power supply race, have put electric power companies at the mercy of customers with alternative supply sources. Given that uncertainty with respect to energy security, as well as power generation and distribution systems safety increases, as strongly cautioned by the recent blackout in the US and Canada, a dramatic conversion of existing strategies would be indispensable for electric power companies. A conversion from a high-demand-elasticity dependent, supply structure to a resilient structure is required. While the former aims at constructing a high-demand-elasticity supply structure, based on the myth of high growth of demand, the latter aims at maintaining profit, while minimizing the elasticities of factors with high uncertainty, such as energy resources and costly capital investment linked to a fluctuating power demand. This paper demonstrates the significance of IT substitution for energy through consortia structure, thereby utilizing IT spillover and leading to resilience and leveraging consortia structure as Japan's electric power industry survival strategy. An empirical analysis using Japan's nine leading electric power companies over the last quarter century has been conducted

On the Kendall Correlation Coefficient

OpenAIRE

Stepanov, Alexei

2015-01-01

In the present paper, we first discuss the Kendall rank correlation coefficient. In continuous case, we define the Kendall rank correlation coefficient in terms of the concomitants of order statistics, find the expected value of the Kendall rank correlation coefficient and show that the later is free of n. We also prove that in continuous case the Kendall correlation coefficient converges in probability to its expected value. We then propose to consider the expected value of the Kendall rank ...

Evaluation of fatigue cracks in FSW joints of industrial structural materials by laminography

International Nuclear Information System (INIS)

Sano, Yuji; Masaki, Kiyotaka; Kajiwara, Kentaro

2016-01-01

Friction stir welding (FSW) is an emerging technology for joining flat and thin metal materials and has been applied in manufacturing in aviation and automotive industries. Fatigue property is one of the most important items to be evaluated for the structural integrity of the products, and therefore, it is necessary to visualize the three-dimensional (3D) behavior of fatigue cracks propagating in the non-homogeneous and anisotropic stirred zone of FSW joints. We have applied laminography with synchrotron radiation of SPring-8 to the FSW joints of aluminum alloy as a typical structural material. The results showed that the fatigue cracks propagated in a unique way depending on the stirred material. (author)

Collusion in the Dutch construction industry: an industrial organization perspective

NARCIS (Netherlands)

Doree, Andries G.

2004-01-01

Several investigations by parliament, cabinet, justice and antitrust authorities have shown a widespread use of cartels and structural bid rigging within the Dutch construction industry. The reputation of the Dutch construction industry has been dented with both the general public and clients. As a

Tomography based determination of permeability, Dupuit-Forchheimer coefficient, and interfacial heat transfer coefficient in reticulate porous ceramics

International Nuclear Information System (INIS)

Petrasch, Joerg; Meier, Fabian; Friess, Hansmartin; Steinfeld, Aldo

2008-01-01

A computer tomography based methodology is applied to determine the transport properties of fluid flow across porous media. A 3D digital representation of a 10-ppi reticulate porous ceramic (RPC) sample was generated by X-ray tomographic scans. Structural properties such as the porosity, specific interfacial surface area, pore-size distribution, mean survival time, two-point correlation function s 2 , and local geometry distribution of the RPC sample are directly extracted from the tomographic data. Reference solutions of the fluid flow governing equations are obtained for Re = 0.2-200 by applying finite volume direct pore-level numerical simulation (DPLS) using unstructured, body-fitted, tetrahedral mesh discretization. The permeability and the Dupuit-Forchheimer coefficient are determined from the reference solutions by DPLS, and compared to the values predicted by selected porous media flow models, namely: conduit-flow, hydraulic radius theory, drag models, mean survival time bound, s 2 -bound, fibrous bed correlations, and local porosity theory-based models. DPLS is further employed to determine the interfacial heat transfer coefficient and to derive a corresponding Nu-correlation, which is compared to empirical correlations

Correlation coefficients in neutron β-decay

International Nuclear Information System (INIS)

Byrne, J.

1978-01-01

The various angular and polarisation coefficients in neutron decay are the principal sources of information on the β-interaction. Measurements of the electron-neutrino angular correlation coefficient (a), the neutron-spin-electron-momentum correlation coefficient (A), the neutron-spin-neutrino-momentum correlation coefficient (B), and the triple correlation coefficient D and time-reversal invariance are reviewed and the results discussed. (U.K.)

Predictive assessment of the Ukrainian power industry fuel balance structure progress

Directory of Open Access Journals (Sweden)

Alexander P. Voinov

2014-12-01

Full Text Available The existing structure of the fuel balance in Ukraine does largely determine high prices of such energy products as the electricity and the heat. The main reason lies in the fact that approximately 40% of the fuel balance represents the expensive imported liquid and gaseous fuels. Of course, such balance structure significantly affects the energy security of Ukraine. The article analyzes the three main directions of this situation possible normalization: replacing the imported gas with relatively inexpensive domestic coal burned at boilers and innovative coal-fired burner systems, especially in the low-temperature boilers with fluidized bed furnaces; replacement of imported fuel with respectively cheap pyrolysis gas obtained from the domestic low-grade brown coal; organization of domestic production of shale gas, which industrial production is scheduled for 2020. These promising directions of the national energetics’ fuel balance development can be considered as a priority part of the national tasks of increasing the country’s energy independence.

Application of information technology in the process analysis of structural subdivisions of light industry enterprises

Directory of Open Access Journals (Sweden)

Тарана Тахир кызы Мусаева

2016-02-01

Full Text Available The problems of application of information technologies in the process analysis of structural subdivisions of the enterprises of light industry enterprises are considered. For the functional cost analysis in the company it was prepared a computerized structure of the workplace and its principle of operation is described. The functionality of the computerized workplace is tested for textile enterprises. The results showed that the use of information technology has good prospects at the implementation of the quality management system at the textile enterprises

Assessment of the Sustainable Development Capacity with the Entropy Weight Coefficient Method

Directory of Open Access Journals (Sweden)

Qingsong Wang

2015-10-01

Full Text Available Sustainable development is widely accepted in the world. How to reflect the sustainable development capacity of a region is an important issue for enacting policies and plans. An index system for capacity assessment is established by employing the Entropy Weight Coefficient method. The results indicate that the sustainable development capacity of Shandong Province is improving in terms of its economy subsystem, resource subsystem, and society subsystem whilst degrading in its environment subsystem. Shandong Province has shown the general trend towards sustainable development. However, the sustainable development capacity can be constrained by the resources such as energy, land, water, as well as environmental protection. These issues are induced by the economy development model, the security of energy supply, the level of new energy development, the end-of-pipe control of pollution, and the level of science and technology commercialization. Efforts are required to accelerate the development of the tertiary industry, the commercialization of high technology, the development of new energy and renewable energy, and the structure optimization of energy mix. Long-term measures need to be established for the ecosystem and environment protection.

Assessment of reliability of a safety culture questionnaire in the cleanser and washer industries

Directory of Open Access Journals (Sweden)

2012-09-01

Full Text Available Introduction: Occupational injuries and accidents as one of the problems have always been considered important in occupational environments. Domino model that Heinrich was formed to pursue the idea of the cause of the accident is the man. Thus one of the effective way to reduce accidents will be control by the unsafe behaviors among workers by promoting safety culture. .Material and Method: In this descriptive - analytical study, the reliability and exploratory factor analysis was used to evaluate the reliability of the questionnaire. In total 303 questionnaires were analyzed using SPSS 17 software. . Result: The alpha crumbed, coefficient was 0/86. Structural factor of the questionnaire was evaluated using factor analysis. KMO and Bartlett’s sphericity test coefficient were 0/909 and 9785/057, respectively. The varimax rotation showed that all test questions are based on factors. .Conclusion: The results indicated favorable validity of this questionnaire for use in detergents and cleaners industries within the country. Considering the load factor safety culture in detergents and cleaners industries, contained 5 factors including “management commitment”, “education and information exchange,” “supportive environment”, “barriers” and “priority to safety”. The obtained the correlations, the highest positive correlation was belong to the “management commitment” (r=0/952, as the strongest correlation with the safety culture.

Gate Control Coefficient Effect on CNFET Characteristic

International Nuclear Information System (INIS)

Sanudin, Rahmat; Ma'Radzi, Ahmad Alabqari; Nayan, Nafarizal

2009-01-01

The development of carbon nanotube field-effect transistor (CNFET) as alternative to existing transistor technology has long been published and discussed. The emergence of this device offers new material and structure in building a transistor. This paper intends to do an analysis of gate control coefficient effect on CNFET performance. The analysis is based on simulation study of current-voltage (I-V) characteristic of ballistic CNFET. The simulation study used the MOSFET-like CNFET mathematical model to establish the device output characteristic. Based on the analysis of simulation result, it is found that the gate control coefficient contributes to a significant effect on the performance of CNFET. The result also shown the parameter could help to improve the device performance in terms of its output and response as well. Nevertheless, the characteristic of the carbon nanotube that acts as the channel is totally important in determining the performance of the transistor as a whole.

The influence of structural changes to the tourist industry in Montenegro

Directory of Open Access Journals (Sweden)

Adžić Slavica

2017-01-01

Full Text Available The influence of transition on the society has reflected on the entire social-economic circumstances in Montenegro. This complex and long process has changed the stability of economic growth and the development of the national economy and has effectuated the structural changes in the economy of Montenegro. Beside transition, the war in the surroundings, international isolation and numerous other problems, which have changed flows of the social and economic development, have affected the condition of the economy system. On the example of other surrounding countries, Montenegro has persevered to provide, through the process of structural reforms, more rational and efficient company market business dealings. This paper investigates to which extent and in which manner the structural changes have reflected onto the tourist industry and which results have been achieved on the basis of reforms which should provide for the joining with the flows of European and World development. By changing the company's state-legal status, the state has strived to provide a greater level of economical activity, productivity growth, degree of participation in the social product, national revenue and employment. According to national economy aggregate indicators, the structural changes have not yet provided the balance of the entire economy to a sufficient extent. Social, economic and political stability are the assumptions for tourism development which is very sensitive to numerous changes in economy and in the society.

Estimating temperature reactivity coefficients by experimental procedures combined with isothermal temperature coefficient measurements and dynamic identification

International Nuclear Information System (INIS)

Tsuji, Masashi; Aoki, Yukinori; Shimazu, Yoichiro; Yamasaki, Masatoshi; Hanayama, Yasushi

2006-01-01

A method to evaluate the moderator coefficient (MTC) and the Doppler coefficient through experimental procedures performed during reactor physics tests of PWR power plants is proposed. This method combines isothermal temperature coefficient (ITC) measurement experiments and reactor power transient experiments at low power conditions for dynamic identification. In the dynamic identification, either one of temperature coefficients can be determined in such a way that frequency response characteristics of the reactivity change observed by a digital reactivity meter is reproduced from measured data of neutron count rate and the average coolant temperature. The other unknown coefficient can also be determined by subtracting the coefficient obtained from the dynamic identification from ITC. As the proposed method can directly estimate the Doppler coefficient, the applicability of the conventional core design codes to predict the Doppler coefficient can be verified for new types of fuels such as mixed oxide fuels. The digital simulation study was carried out to show the feasibility of the proposed method. The numerical analysis showed that the MTC and the Doppler coefficient can be estimated accurately and even if there are uncertainties in the parameters of the reactor kinetics model, the accuracies of the estimated values are not seriously impaired. (author)

Seebeck coefficient of synthesized Titanium Dioxide thin film on FTO glass substrate

Science.gov (United States)

Usop, R.; Hamed, N. K. A.; Megat Hasnan, M. M. I.; Ikeda, H.; Sabri, M. F. M.; Ahmad, M. K.; Said, S. M.; Salleh, F.

2018-04-01

In order to fabricate a thermoelectric device on glass substrate for harvesting waste heat energy through house appliances, the Seebeck coefficient of translucent TiO2 thin film was investigated. The TiO2 thin film was synthesized by using hydrothermal method with F-SnO2 coated glass as substrate. From scanning electron microscopy analysis, the synthesized TiO2 thin film was found to be in nanometer-scale rod structure with a thickness of 4 µm. The Seebeck coefficient was measured in the temperature range of 300 – 400 K. The Seebeck coefficient is found to be in negative value which shows that synthesized film is an n-type semiconductor material, and is lower than the value of bulk-size material. This reduction in Seebeck coefficient of TiO2 thin film is likely due to the low dimensional effect and the difference of carrier concentration.

WOMEN IN THE GARMENT INDUSTRY OF BANGLADESH; A PARADOX OF WOMEN EMPOWERMENT AND TRANSFORMATION OF STRUCTURAL VIOLENCE

OpenAIRE

Habib, Md. Ahsun

2014-01-01

This thesis examines whether the presence of women in the garment industry of Bangladesh is a means of empowerment or just a continuation of structural violence. Due to the patriarchal system in Bangladesh, structural violence against women has been an ongoing problem throughout the country’s history. The focus of this research is that structural violence is still present in the society and in the garment sector, which halt the social and economic empowerment of women. Using a gender lens alo...

The decision concerning the nuclear investment: influence of the industrial structure; La decision d'investissement nucleaire: l'influence de la structure industrielle

Energy Technology Data Exchange (ETDEWEB)

Guillerminet, M.L

2000-10-01

This report aims to analyze the investment behavior of an enterprise producing nuclear origin electric power in an european market opening to the competition. In this context, the industrial structure controlled by the governor decides the investment in a marginal equipment: either an integrated monopole structure which leads to a regulation at the cost price rate of return; or a pool structure in which the governor intervene to fix the cost price at the marginal cost level given by the main technology of the gas combined cycles. (A.L.B.)

Quantization of anomaly coefficients in 6D $\\mathcal{N}=(1,0)$ supergravity

OpenAIRE

Monnier, Samuel; Moore, Gregory W.; Park, Daniel S.

2017-01-01

We obtain new constraints on the anomaly coefficients of 6D $\\mathcal{N}=(1,0)$ supergravity theories using local and global anomaly cancellation conditions. We show how these constraints can be strengthened if we assume that the theory is well-defined on any spin space-time with an arbitrary gauge bundle. We distinguish the constraints depending on the gauge algebra only from those depending on the global structure of the gauge group. Our main constraint states that the coefficients of the a...

STRUCTURE AND ORGANIZATION OF SHAPES IN THE DESIGN OF INDUSTRIAL PRODUCTS, USING GEOMETRICAL TRANSFORMATIONS

OpenAIRE

MARIN Dumitru

2006-01-01

This paper presents the major contribution of geometrical transformations in the structure and organization of the shapes which compose industrial products. Geometrical transformations, such as symmetry, translation, rotation, homology etc. are frequently used in the design activity for filling the plane and the space (plane and spatial equipartitions), in ornaments and also in creating shapes, which are functional and aesthetical at the same time.

Measuring of heat transfer coefficient

DEFF Research Database (Denmark)

Henningsen, Poul; Lindegren, Maria

Subtask 3.4 Measuring of heat transfer coefficient Subtask 3.4.1 Design and setting up of tests to measure heat transfer coefficient Objective: Complementary testing methods together with the relevant experimental equipment are to be designed by the two partners involved in order to measure...... the heat transfer coefficient for a wide range of interface conditions in hot and warm forging processes. Subtask 3.4.2 Measurement of heat transfer coefficient The objective of subtask 3.4.2 is to determine heat transfer values for different interface conditions reflecting those typically operating in hot...

Predicting cyclohexane/water distribution coefficients for the SAMPL5 challenge using MOSCED and the SMD solvation model

Science.gov (United States)

Diaz-Rodriguez, Sebastian; Bozada, Samantha M.; Phifer, Jeremy R.; Paluch, Andrew S.

2016-11-01

We present blind predictions using the solubility parameter based method MOSCED submitted for the SAMPL5 challenge on calculating cyclohexane/water distribution coefficients at 298 K. Reference data to parameterize MOSCED was generated with knowledge only of chemical structure by performing solvation free energy calculations using electronic structure calculations in the SMD continuum solvent. To maintain simplicity and use only a single method, we approximate the distribution coefficient with the partition coefficient of the neutral species. Over the final SAMPL5 set of 53 compounds, we achieved an average unsigned error of 2.2± 0.2 log units (ranking 15 out of 62 entries), the correlation coefficient ( R) was 0.6± 0.1 (ranking 35), and 72± 6 % of the predictions had the correct sign (ranking 30). While used here to predict cyclohexane/water distribution coefficients at 298 K, MOSCED is broadly applicable, allowing one to predict temperature dependent infinite dilution activity coefficients in any solvent for which parameters exist, and provides a means by which an excess Gibbs free energy model may be parameterized to predict composition dependent phase-equilibrium.

Structural alteration of industry of region as pre-condition of steady development of national economy (on the example of the Dnepropetrovsk area

Directory of Open Access Journals (Sweden)

V. E. Vlasiuk

2014-02-01

Full Text Available An economic analysis is conducted in the production sphere of the Dnepropetrovsk area in a period development and in the process of transformation production to the sector of the national economic system. In particular, an analysis of the actual state of socio ­economic development of the Dnipropetrovsk region in the late XX century and its current state in order to find trends change attributes of manifestation and impact on living standards . The analysis of individual industries Dnipropetrovsk region. It is shown that the basis of the regional industry ­ metallurgy. Comparative analysis of the sectoral structure of industrial production Dnipropetrovsk Oblast major types of products that characterize its economy in 1997 and 2012. This analysis revealed the changes in the structural transformation of the regional industry . The basic indicators of socio­ economic development of the Dnipropetrovsk region. In particular , it was found that the dynamics of socio ­economic development of the region by major figures exceeded the average values in Ukraine , and the main results of 2011 was a steady growth in key sectors of the Dnipropetrovsk region. Were clarified problems of the region’s economy and its future prospects . The factors of forming of regional economic policy and principles of structural alteration of industry are considered.

Permeability coefficient of proton irradiated polyethylene terephatalate thin films

International Nuclear Information System (INIS)

Bassani, L.C.; Santos, W.M.S.; Marechal, B.

1983-01-01

The principle of operation of an apparatus developed to study gas permation through thin films is described and the measurement method is discussed. Use is made of diffusion theory to obtain a expression for the permeability coefficient as a function of the rate of increase of the pressure in the receiving volume. The Gibbs function for permeation of Helium through Polyethylene Terephtalate (P.E.T.) is determined. The permeability coefficient of Helium is found to increase significantly with the range of the implanted protons although the incident charge has been kept constant. The hypothesis of structural modifications of the proton implanted P.E.T. seems to be confirmed by small angles X-rays scattering experiments on the irradiated samples. (Author) [pt

Coefficient of crystal lattice matching as a parameter of substrate - crystal structure compatibility in silumins

Directory of Open Access Journals (Sweden)

J. Piątkowski

2009-07-01

Full Text Available Adding high-melting point elements (Mo, Nb, Ni, Ti, W to complex silumins results in hardening of the latter ones, owing to the formation of new intermetallic phases of the AlxMey type, with refinement of dendrites in α solution and crystals in β phase. The hardening is also due to the effect of various inoculants. An addition of the inoculant is expected to form substrates, the crystal lattice of which, or some (privileged lattice planes and interatomic spaces should bear a strong resemblance to the crystal nucleus. To verify this statement, using binary phase equilibria systems, the coefficient of crystal lattice matching, being one of the measures of the crystallographic similarity, was calculated. A compatibility of this parameter (up to 20% may decide about the structure compatibility between the substrate and crystal which, in turn, is responsible for the effectiveness of alloy modification. Investigations have proved that, given the temperature range of their formation, the density, the lattice type, and the lattice parameter, some intermetallic phases of the AlxMey type can act as substrates for the crystallisation of aluminium and silicon, and some of the silumin hardening phases.

Form of multicomponent Fickian diffusion coefficients matrix

International Nuclear Information System (INIS)

Wambui Mutoru, J.; Firoozabadi, Abbas

2011-01-01

Highlights: → Irreversible thermodynamics establishes form of multicomponent diffusion coefficients. → Phenomenological coefficients and thermodynamic factors affect sign of diffusion coefficients. → Negative diagonal elements of diffusion coefficients matrix can occur in non-ideal mixtures. → Eigenvalues of the matrix of Fickian diffusion coefficients may not be all real. - Abstract: The form of multicomponent Fickian diffusion coefficients matrix in thermodynamically stable mixtures is established based on the form of phenomenological coefficients and thermodynamic factors. While phenomenological coefficients form a symmetric positive definite matrix, the determinant of thermodynamic factors matrix is positive. As a result, the Fickian diffusion coefficients matrix has a positive determinant, but its elements - including diagonal elements - can be negative. Comprehensive survey of reported diffusion coefficients data for ternary and quaternary mixtures, confirms that invariably the determinant of the Fickian diffusion coefficients matrix is positive.

Barriers to implement green supply chain management in automobile industry using interpretive structural modeling technique: An Indian perspective

OpenAIRE

Sunil Luthra; Vinod Kumar; Sanjay Kumar; Abid Haleem

2011-01-01

Purpose: Green Supply Chain Management (GSCM) has received growing attention in the last few years. Most of the automobile industries are setting up their own manufacturing plants in competitive Indian market. Due to public awareness, economic, environmental or legislative reasons, the requirement of GSCM has increased.  In this context, this study aims to develop a structural model of the barriers to implement GSCM in Indian automobile industry.Design/methodology/approach: We have ident...

Industrial pollution and the management of river water quality: a model of Kelani River, Sri Lanka.

Science.gov (United States)

Gunawardena, Asha; Wijeratne, E M S; White, Ben; Hailu, Atakelty; Pandit, Ram

2017-08-19

Water quality of the Kelani River has become a critical issue in Sri Lanka due to the high cost of maintaining drinking water standards and the market and non-market costs of deteriorating river ecosystem services. By integrating a catchment model with a river model of water quality, we developed a method to estimate the effect of pollution sources on ambient water quality. Using integrated model simulations, we estimate (1) the relative contribution from point (industrial and domestic) and non-point sources (river catchment) to river water quality and (2) pollutant transfer coefficients for zones along the lower section of the river. Transfer coefficients provide the basis for policy analyses in relation to the location of new industries and the setting of priorities for industrial pollution control. They also offer valuable information to design socially optimal economic policy to manage industrialized river catchments.

The Negro in the Furniture Industry. The Racial Policies of American Industry Series.

Science.gov (United States)

Fulmer, William E.

This is the twenty-eighth of a series of studies conducted to determine variances in industrial employment practices of Negroes and to develop appropriate hiring policies. This particular study sought to examine current racial employment policies in the furniture industry within the context of the industry's structure and history. Interviews with…

Calculation of calcium diffusion coefficient of cement hardenings using minute pore data

International Nuclear Information System (INIS)

Hitomi, Takashi; Takeda, Nobufumi; Iriya, Keishiro

2009-01-01

This report describes the calculations of the diffusion coefficient of the Ca ion of cement hardenings using minute pore data. The observed hardenings were ordinary Portland cement (OPC), low-heat Portland cement with fly ash (LPC+FA) and highly fly ash containing silica fume cement (HFSC). The samples were cured in the standard and artificially leached by accelerated test. Minute pore datas of the cement hardenings were acquired with image processing of internal structural information obtained from high resolution X-ray computed tomography observations. Upon analysis, several voxels are combined into one bigger voxel, the diffusion coefficient of the voxels were determined in proportion to the number of voxels which were included in. The results reveal that the change in the calcium diffusion coefficient of OPC due to leaching was large, but the LPC+FA and HFSC cements exhibited even greater changes than OPC. It is suggested that the diffusion coefficients are proportional to the Ca/Si ratio of the samples. (author)

FACTORS INFLUENCING ORGANIZATIONAL STRUCTURE IN THE FOOD MANUFACTURING, CHEMICAL, AGRICULTURAL WHOLESALING AND BIOTECHNOLOGY INDUSTRIES

OpenAIRE

Maude Roucan-Kane

2009-01-01

The objective of this study is to identify factors determining a business investment strategy (i.e., the choice of investment commitment and form of organizational structure) in the food manufacturing, chemical, agricultural wholesaling and biotechnology industries. Propositions regarding strategic alliance theories are tested on over 400 inter-firm collaborative agreements using secondary data from major US and European companies for the 1994-97 period. Results suggest that transactions with...

Data for a steel industry model

OpenAIRE

Mæstad, Ottar

2000-01-01

SNF has recently developed a new model of the steel market and some of the major factor markets connected to the steel industry. The aim of the model has been to study how regulations of the emissions of carbon dioxide (CO2) in the steel industry might affect the structure of the industry. It has also been an objective to investigate how structural changes in the steel industry might influence on the industry’s demand for transport services. This paper outlines the details about the data that...

Sabine absorption coefficients to random incidence absorption coefficients

DEFF Research Database (Denmark)

Jeong, Cheol-Ho

2014-01-01

into random incidence absorption coefficients for porous absorbers are investigated. Two optimization-based conversion methods are suggested: the surface impedance estimation for locally reacting absorbers and the flow resistivity estimation for extendedly reacting absorbers. The suggested conversion methods...

Dynamics with infinitely many derivatives: variable coefficient equations

International Nuclear Information System (INIS)

Barnaby, Neil; Kamran, Niky

2008-01-01

Infinite order differential equations have come to play an increasingly significant role in theoretical physics. Field theories with infinitely many derivatives are ubiquitous in string field theory and have attracted interest recently also from cosmologists. Crucial to any application is a firm understanding of the mathematical structure of infinite order partial differential equations. In our previous work we developed a formalism to study the initial value problem for linear infinite order equations with constant coefficients. Our approach relied on the use of a contour integral representation for the functions under consideration. In many applications, including the study of cosmological perturbations in nonlocal inflation, one must solve linearized partial differential equations about some time-dependent background. This typically leads to variable coefficient equations, in which case the contour integral methods employed previously become inappropriate. In this paper we develop the theory of a particular class of linear infinite order partial differential equations with variable coefficients. Our formalism is particularly well suited to the types of equations that arise in nonlocal cosmological perturbation theory. As an example to illustrate our formalism we compute the leading corrections to the scalar field perturbations in p-adic inflation and show explicitly that these are small on large scales.

I-distance and separability coefficient in business evaluation of SME's in agribusiness

Directory of Open Access Journals (Sweden)

Popović Blaženka

2016-01-01

Full Text Available Systematic and continuous process of measuring and comparing business results of companies regarding to business results of leaders, in order to obtain information that will help the company to take action to improve its performance, is in a function of improving business operations. Accordingly, the first objective of this paper is, based on the coefficient of separability, to determine which indicators of business conditions and business results have the greatest impact on differences in the business operations of the observed SMEs operating in the food industry. The second objective of this work is to make the ranking of companies based on the business conditions and business results using discriminant analysis (I-distance, and then, to determine the overall rank of companies using general ranking coefficient (Ker. The results show that companies are significantly separated according to business results rather than to business conditions, and in addition, the business results also had a crucial impact on the overall rank of each company.

Spatial Variation of Hydrodynamic Mass Coefficients for Tube Bundle in a Cylindrical Shell

Energy Technology Data Exchange (ETDEWEB)

Yang, Keum Hee; Ryu, Ki Wahn [Chonbuk National University, Jeonju (Korea, Republic of); Park, Chi Yong [KEPCO Research Institute, Daejeon (Korea, Republic of)

2011-05-15

Wear of the steam generator (SG) tubes affects the performance of nuclear power plants. Generally, the problem is caused by excessive flow-induced vibration (FIV). In analyzing the FIV, many researchers have used a uniform added mass coefficient for all of the SG tubes. However, the outermost SG tubes have more structural problems than inside tubes. The purpose of this study is to find out the added mass coefficients of each tube in a cylindrical shell

Channeling Polyolefin Molecular Structure - Bulk Property Correlation Strategies for Industrial Applicability

Science.gov (United States)

Hule, Rohan; Thurman, Derek; Doufas, Antonios

Polyolefins occupy a significant volume of the polymer products portfolio in commodity and high value applications. Quantifying and optimizing structure-property relationships enables growth in new markets. It is well recognized that coupling lab-based, comprehensive methodologies with bulk properties of interest to industrial environments offer the greatest potential of technology advancement, ultimately leading to commercial success. It is imperative to recognize the existing gap of knowledge translation between lab measurements and industrial-scale operability. This study highlights experimental HDPEs synthesized from dual, single-site, co-supported catalysts that exhibit enhanced solid-state properties such as stiffness, impact and ESCR surpassing conventional trends. Commercial resins across distinct sub-families were included as well. Commonality amongst these resins is bimodality and broad MW distribution with well-defined splits and spreads. Investigations on commercially relevant parameters such as melt strength, melt elasticity and shear thinning established excellent performance for experimental bimodals, corroborating potential benefits compared to commercial HDPEs. To summarize, the effort highlights well-recognized pathways such as improvements in mechanical and melt properties that can be attributed to apposite tuning of polymer chain architecture and MW distribution with implications across myriad markets. Ultimately, this may serve as a pathway for producing innovative products that deliver business success and growth.

The German lignite industry. Historical development, resources, technology, economic structures and environmental impact. Study

International Nuclear Information System (INIS)

2017-05-01

Lignite has a key role to play in the transformation of the energy system due to its specific structural features in terms of industry, company history, policy, economics, the environment and regional structures. Understanding these structural features of the German lignite industry is an important requirement for classifying the significance of the lignite industry up to now and for the redesigning of this industrial sector. From these environmental, economic and regulatory structural characteristics, which are interwoven in a variety of ways, the incentives arise for the mining and power plant operators to react to energy price signals or energy policy steering. The aim of this research study is to define these structural features, to compile comprehensively the basic data and information that is not always transparently available, to understand the interactions, to enable the navigation of issues that are partly very complex, and to classify into the long-term developments that are especially important for political and social processes. In 2016 approx. 12 percent of German primary energy consumption was met using lignite. At the same time, lignite has the highest carbon dioxide (CO2) emissions of the fossil fuels; it currently accounts for approx. 19 percent of Germany's total greenhouse gas emissions as well as approx. 46 percent of the total CO2 emissions of the electricity sector. As a result of the mining of lignite and its conversion into electricity, substantial adverse impacts beyond the entry of greenhouse gases into the Earth's atmosphere arise for other environmental media. These impacts include half of Germany's mercury emissions, approx. a third of its sulfur dioxide emissions and approx. a tenth of its nitrogen oxide emissions. Lignite mining in open-cast mines takes up a substantial amount of landscape and soil and requires huge interventions in the water balance. Relatively high costs arise for the recultivation and rehabilitation of the open

The Impacts of Climate Change Negotiation on Domestic Industrial Structure and International Competitiveness

Energy Technology Data Exchange (ETDEWEB)

Lim, Jae Kyu; Kang, Yoon Young [Korea Energy Economics Institute, Euiwang (Korea)

2000-12-01

The world community adopted the Kyoto Protocol in 1997 at the third Conference of the Parties to the United Nations Framework Convention on Climate Change(UNFCCC). The main achievement was agreement by developed(Annex I) countries to reduce or limit their greenhouse gas emissions. To assist parties in meeting their emission targets the Protocol sanctions the use of economic instruments such as the clean development mechanism(CDM), joint implementation(JI) and emissions trading(ET). However, there is still significant uncertainty surrounding the Kyoto Protocol for much of the details in the Protocol remains to be negotiated. The challenge now facing those negotiating the Kyoto Protocol is to remove the uncertainty and secure ratification of the Protocol. After the negotiation reaches an agreement in near future, the next main issue to be addressed is the way of involvement of developing countries in emission abatement commitments. The analysis presented in this report is based on the application of a global computable general equilibrium(CGE) model - GTEM-KOR. According to the analysis, compliance with Kyoto Protocol commitments, regardless of the emissions trading, is projected to impose economic costs on Annex I regions in the aggregate. Despite having no emission abatement commitments under the Kyoto Protocol, non-Annex I economies would be affected by emission abatement in Annex I regions undertaken as a result of entry into force of the Protocol. These effects would arise through trade and investment linkages between economies. Although the net impact for non-Annex I regions in aggregate is projected to be positive, there is a range of effects and the net impact for any one non-Annex I country will depend on its particular production and trade structure. As industrialized countries reduce their fossil fuel consumption to meet their emission reduction targets, their demand for fossil fuel imports from non-Annex I countries will decline, leading to lower fossil

Transport Coefficients of Fluids

CERN Document Server

Eu, Byung Chan

2006-01-01

Until recently the formal statistical mechanical approach offered no practicable method for computing the transport coefficients of liquids, and so most practitioners had to resort to empirical fitting formulas. This has now changed, as demonstrated in this innovative monograph. The author presents and applies new methods based on statistical mechanics for calculating the transport coefficients of simple and complex liquids over wide ranges of density and temperature. These molecular theories enable the transport coefficients to be calculated in terms of equilibrium thermodynamic properties, and the results are shown to account satisfactorily for experimental observations, including even the non-Newtonian behavior of fluids far from equilibrium.

Peculiarities of determination of coefficient of radionuclide absorption in alimentary canal of ruminants

International Nuclear Information System (INIS)

Korneev, N.A.; Sirotkin, A.N.; Rasin, I.M.; Sarapul'tsev, I.A.; Abramova, T.N.

1986-01-01

Sheep taken as example, the new method for calculation of the coefficient of radionuclide ( 65 Zn) absorption in gastrointestinal tract (GIT) is suggested. It is shown that the radionuclide absorption process of sheep lasted 35 h. In case of parenteral intake radionuclide excretion from tissues and organs and its inclusion in structural parts of blood occurs. In animals to which 65 Zn is injected orally, the same processes at 65 Zn simultaneous absorption in GIT during 35 h take place. In 35 hours after radio nuclide injection its absorption coefficient in the GIT of sheep constituted 10.1+-0.05%. Using traditional calculation methods the 65 Zn absorption coefficient for the first 24 h constituted 6.6%

The Growth Determinant in the Industrial Sector Featured in East Java Province

Directory of Open Access Journals (Sweden)

Mohtar Rasyid

2016-06-01

Full Text Available This article aims toanalyzethe main determining factorof growthof industrialsector, especiallythe small scale industriesin East Javaover the past decade. Using theofthe Cobb-Douglas production functionapproach, this research assessedinputfactorconsisting oflabor, capitalandrawmaterials.This study used apooling regression modelto estimate the coefficient of production function fromfourgroups ofselected industries namely:the food industry, textile industry, wood industryandpaperindustry. The results showedthat the sourceof growthfor the industryisstilldominatedbythe physicalgrowth ofinputandnot byproductivity growth. As a result, in the long rungrowth ofthe industry is difficulttobesustainable and relativelyvulnerable toeconomic shocks. Based onthese findingssuggested thatpolicy makersfocus more onefforts toimprove the quality ofinputs, in particularinputqualityhuman resourcesor labor.  

Mass Transfer Coefficients and Bubble Sizes in Oxidative Ladle Refining of Silicon

OpenAIRE

Bjørnstad, Erlend Lunnan

2016-01-01

The mass transfer of [Al] and [Ca] between three synthetic SiO_{2}-CaO-Al_{2}O_{3} slags, and 8N silicon, has been investigated to find the overall mass transfer coefficient k_{i,t} for the individual species. Samples were kept at 1873K for 5, 10, 20, 30 and 180min before quenching. The metal phase was later analyzed by ICP-MS to view how the concentrations of impurities change with respect to time. This work then compares these results to industrial data gathered from ladles used for oxidati...

A comparison of two indices for the intraclass correlation coefficient.

Science.gov (United States)

Shieh, Gwowen

2012-12-01

In the present study, we examined the behavior of two indices for measuring the intraclass correlation in the one-way random effects model: the prevailing ICC(1) (Fisher, 1938) and the corrected eta-squared (Bliese & Halverson, 1998). These two procedures differ both in their methods of estimating the variance components that define the intraclass correlation coefficient and in their performance of bias and mean squared error in the estimation of the intraclass correlation coefficient. In contrast with the natural unbiased principle used to construct ICC(1), in the present study it was analytically shown that the corrected eta-squared estimator is identical to the maximum likelihood estimator and the pairwise estimator under equal group sizes. Moreover, the empirical results obtained from the present Monte Carlo simulation study across various group structures revealed the mutual dominance relationship between their truncated versions for negative values. The corrected eta-squared estimator performs better than the ICC(1) estimator when the underlying population intraclass correlation coefficient is small. Conversely, ICC(1) has a clear advantage over the corrected eta-squared for medium and large magnitudes of population intraclass correlation coefficient. The conceptual description and numerical investigation provide guidelines to help researchers choose between the two indices for more accurate reliability analysis in multilevel research.

Energy coefficients for a propeller series

DEFF Research Database (Denmark)

Olsen, Anders Smærup

2004-01-01

The efficiency for a propeller is calculated by energy coefficients. These coefficients are related to four types of losses, i.e. the axial, the rotational, the frictional, and the finite blade number loss, and one gain, i.e. the axial gain. The energy coefficients are derived by use...... of the potential theory with the propeller modelled as an actuator disk. The efficiency based on the energy coefficients is calculated for a propeller series. The results show a good agreement between the efficiency based on the energy coefficients and the efficiency obtained by a vortex-lattice method....

Geothermal industry assessment

Energy Technology Data Exchange (ETDEWEB)

1980-07-01

An assessment of the geothermal industry is presented, focusing on industry structure, corporate activities and strategies, and detailed analysis of the technological, economic, financial, and institutional issues important to government policy formulation. The study is based principally on confidential interviews with executives of 75 companies active in the field. (MHR)

IMPROVING MARKETING LOGISTICS MANAGEMENT OF ENTERPRISES OF AGRO-INDUSTRIAL COMPLEX

Directory of Open Access Journals (Sweden)

Raisa Bilovol

2016-11-01

Full Text Available The Purpose of the paper is to prove the need of improving marketing logistics management at enterprises of agro-industrial complex with the use of balanced scorecard method that will allow objectively evaluate its effectiveness. Methodology. The survey is based on the use of general scientific research methods, methods of analysis and synthesis, method of abstraction. Results. Research of state sales of agricultural products in agrarian enterprises helped us to identify and organize the following disadvantages: intermediary structures that are engaged in marketing of agricultural products significantly increase their costs that excess in 2-4 times the original price of agricultural products; inadequacy of agricultural market infrastructure and lack of wholesale and retail markets for agricultural products; low level of development of information electronic communications; backwardness of transport infrastructure and poor quality of roads, particularly in rural areas; high level of physical and moral deterioration of transport; low level of development of industrial and technological base of agricultural enterprises warehousing. Practical implications. We systemized and proposed indicators of evaluation of marketing logistics at enterprises of the agro-industrial complex based on the Balanced Scorecard in key areas: financial and cost-effectiveness indicators; indicators of internal logistics business processes; quality and development staff; indicators in the direction of working with clients. To the financial indicators and indicators of economic efficiency we included such as sales per 1 employer at marketing department (Qs/employer, proportion of logistics cost of marketing in the total cost of the enterprise (%, coefficient of the implementation of marketing plan (Cm, ROI in logistics marketing (%, profitability of marketing channels (%. Internal logistics business processes in enterprises of the agro-industrial complex represented by such

Methodical Approach to Assessment of the Structure of Demand on the Products of the Restaurant Industry Enterprises

Directory of Open Access Journals (Sweden)

Chorna Maryna V.

2013-11-01

Full Text Available The article presents a methodical approach to assessment of the structure of demand on the products (services of the restaurant industry enterprises and results of its approval. A characteristic feature of this approach is clear identification of stages and their logical consequence in the process of assessment (identification of the period of assessment – day, week, holidays, seasons; formation and systematisation of the information base by cost, quantitative and qualitative indicators; calculation of relative indicators of demand and income; building a matrix; and interpretation of results and application of the “demand level / income level” matrix. Use of the proposed approach allows identification of an assortment structure of the restaurant industry enterprise by correlation of the realised demand and obtained income, which gives a possibility to form managerial decisions on its improvement and also allows assessment of efficiency of these measures.

Determinant factors of industrial symbiosis: greening Pasir Gudang industrial park

Science.gov (United States)

Teh, B. T.; Ho, C. S.; Matsuoka, Y.; Chau, L. W.; Gomi, K.

2014-02-01

Green industry has been identified as an important element in attaining greater sustainability. It calls for harmonizing robust economic growth with environment protection. Industries, particularly in developing and transitional nations such as Malaysia, are in need of a reform. Many experts and international organizations suggest the concept of industrial symbiosis. Mainly, there are successful cases of industrial symbiosis practices around the world. However, there are numerous cases of failure too. As industrial symbiosis is an emerging new approach, with a short history of two decades, a lot of researches are generally focused on narrow context and technical details. There is a lack of concerted efforts to look into the drivers and barriers of industrial symbiosis across different cases. This paper aims to examine the factors influencing the development of industrial symbiosis from various countries to supports such networks to evolve in Pasir Gudang. The findings show institution, law and regulation, finance, awareness and capacity building, technology, research and development, information, collaboration, market, geography proximity, environmental issues and industry structure affect the formation of industrial symbiosis.

Determinant factors of industrial symbiosis: greening Pasir Gudang industrial park

International Nuclear Information System (INIS)

Teh, B T; Ho, C S; Chau, L W; Matsuoka, Y; Gomi, K

2014-01-01

Green industry has been identified as an important element in attaining greater sustainability. It calls for harmonizing robust economic growth with environment protection. Industries, particularly in developing and transitional nations such as Malaysia, are in need of a reform. Many experts and international organizations suggest the concept of industrial symbiosis. Mainly, there are successful cases of industrial symbiosis practices around the world. However, there are numerous cases of failure too. As industrial symbiosis is an emerging new approach, with a short history of two decades, a lot of researches are generally focused on narrow context and technical details. There is a lack of concerted efforts to look into the drivers and barriers of industrial symbiosis across different cases. This paper aims to examine the factors influencing the development of industrial symbiosis from various countries to supports such networks to evolve in Pasir Gudang. The findings show institution, law and regulation, finance, awareness and capacity building, technology, research and development, information, collaboration, market, geography proximity, environmental issues and industry structure affect the formation of industrial symbiosis

Optimized probabilistic calibration of safety coefficients in defect severity assessments; Dimensionnement probabiliste optimise des coefficients de securite dans les etudes de nocivite de defauts

Energy Technology Data Exchange (ETDEWEB)

Ardillon, E.; Pitner, P.; Barthelet, B. [Electricite de France, Direction des Etudes at Recherches, 92 - Clamart (France)

1997-12-31

The construction codes currently used in nuclear engineering recommend analysis methods and criteria consistent with a deterministic approach. Since 1993, in the framework of work related to the RSEM codes, the EFMT Branch has launched a probabilistic approach to establish a link between the current `deterministic` rules and failure risk assessments for the structures considered. There is an explicit link between the two approaches in the elementary strength/load case where the variables are Gaussian. This case provides the basis for the proposed methodology. In the complex case discussed in this paper, involving cracked piping with numerous non-Gaussian inputs, for a given failure mode, there is an implicit relationship between the target reliability level and the partial safety coefficients attached to each variable. The mean flaw size is the intermediate parameter used to make this link and allows flexibility in the choice of coefficients, thereby raising the question of optimized calibration. The approach is illustrated by the choice of coefficients based on the coordinates of the most probable failure point, resulting in a single set of coefficients adapted to the immediate vicinity of a given situation. In cases where the criterion must guarantee a given reliability level for a number of different operating situations, no set of coefficients can entirely guarantee the target reliability level. So, an optimized set of coefficients has to be selected, ensuring a reliability level as uniform as possible over the scope considered. This paper compares an initial coefficient proposal with a choice based on the design point method. The intermediate variable in assessing the reliability level is the mean flaw size, which would seem compatible with problems encountered under operating conditions. In addition, realistic risk assessment requires validation of the main variable distribution assumptions. We give an example of adjustment of distribution assumptions to

Efficiency in the United States electric industry: Transaction costs, deregulation, and governance structures

Science.gov (United States)

Peterson, Carl

Transaction costs economics (TCE) posits that firms have an incentive to bypass the market mechanisms in situations where the cost of using the market is prohibitive. Vertical integration, among other governance mechanisms, can be used to minimize the transactions costs associated with the market mechanism. The study analyses different governance mechanisms, which range from complete vertical integration to the use of market mechanisms, for firms in the US electric sector. This sector has undergone tremendous change in the past decade including the introduction of retail competition in some jurisdictions. As a result of the push toward deregulation of the industry, vertically integration, while still significant in the sector, has steadily been replaced by alternative governance structures. Using a sample of 136 investor-owned electric utilities that reported data the US Federal Energy Regulatory Commission between 1996 and 2002, this study estimates firm level efficiency using Data Envelopment Analysis (DEA) and relates these estimates to governance structure and public policies. The analysis finds that vertical integration is positively related to firm efficiency, although in a non-linear fashion suggesting that hybrid governance structures tend to be associated with lower efficiency scores. In addition, while some evidence is found for negative short-term effects on firm efficiency from the choice to deregulate, this result is sensitive to DEA model choice. Further, competition in retail markets is found to be positively related to firm level efficiency, but the retreat from deregulation, which occurred after 2000, is negatively associated with firm-level efficiency. These results are important in the ongoing academic and public policy debates concerning deregulation of the electric section and indicate that vertical economies remain in the industry, but that competition has provided incentives for improving firm level efficiency.

Barriers to the Uptake of Concurrent Engineering in the Nigerian Construction Industry

Directory of Open Access Journals (Sweden)

Nathaniel Anny Aniekwu

2012-12-01

engineering and also to compute the Kendall’s coefficient of concordance, which assess the levels of agreement among the judges on the consistency of the rankings. A Kendall’s coefficient of concordance of W=0.57365 was recorded. A lack of awareness emerged as the most important barrier against the integration of this concept into the Nigerian construction industry. The top five variables are all human factors that can be ameliorated by proper education.

Structural isotopic effect of the α/β-phase transition in the vanadium hydride and its influence on the equilibrium coefficient of separation of hydrogen isotopes in the gas-solid system

International Nuclear Information System (INIS)

Magomedbekov, Eh.P.; Bochkarev, A.V.

1999-01-01

Equilibrium coefficient of hydrogen isotope separation (α H-D ) in the system of vanadium hydride VH n (solid, n ∼ 0.7)-H 2 (g) is measured by the counterbalancing method in a circulation facility and by the method of laser desorption at 298, 373, and 437 K. It is shown that the combination of highly anharmonic potential in the lattice octahedral sites and in significant difference in the energy of hydrogen atom coordination for tetra- and octahedral sites is the reason for unusual behaviour of the hydrogen isotope separation coefficient and the difference in crystal structures of vanadium hydride and deuteride [ru

PREDICTING SOIL SORPTION COEFFICIENTS OF ORGANIC CHEMICALS USING A NEURAL NETWORK MODEL

Science.gov (United States)

The soil/sediment adsorption partition coefficient normalized to organic carbon (Koc) is extensively used to assess the fate of organic chemicals in hazardous waste sites. Several attempts have been made to estimate the value of Koc from chemical structure ...

Genetic modification and its impact on industry structure and performance: post-harvest deterioration of cassava in Thailand

NARCIS (Netherlands)

Vlaar, P.W.L.; Beek, van P.; Visser, R.G.F.

2007-01-01

Genetic modification has led to fierce debates around the world. Nevertheless, scientific evidence for its potential effects on the structure and performance of industries has hitherto remained rather meagre. In this article, we take some preliminary steps towards closing this gap by exploring the

World electricity and gas industries

International Nuclear Information System (INIS)

Kahane, A.

1990-01-01

Electric and gas utilities are central middlemen in the energy business. Worldwide, more than 50% of all primary energy is transformed by utilities and delivered to final consumers through utility wires and pipes. The structure and behavior of the electricity and gas industries and the role and behavior of utilities are therefore important to all other energy industry players. The electricity and gas industries are special. Unlike oil, coal, or wood, electricity and gas are transported from producers to consumers mostly via fixed grids. This means that supplies are generally tied to specific markets and, unlike an oil tanker on the high seas, cannot be easily diverted elsewhere. These grids are natural monopolies inasmuch as having more than one wire or pipe along a given route is generally unnecessary duplicative. In addition, both supply and grid investments are generally large and lumpy. Industrial organization theory suggests that the coordination of industries can be achieved either through hierarchies or through markets. Hierarchies are generally preferred when the transaction costs of coordinating through markets is too high. These two elements of electricity and gas industry structure are the means of hierarchical coordination. This paper discusses the possibilities for changing the structure of utilities to one which has greater reliance on markets

LETTER TO THE EDITOR: Fractal diffusion coefficient from dynamical zeta functions

Science.gov (United States)

Cristadoro, Giampaolo

2006-03-01

Dynamical zeta functions provide a powerful method to analyse low-dimensional dynamical systems when the underlying symbolic dynamics is under control. On the other hand, even simple one-dimensional maps can show an intricate structure of the grammar rules that may lead to a non-smooth dependence of global observables on parameters changes. A paradigmatic example is the fractal diffusion coefficient arising in a simple piecewise linear one-dimensional map of the real line. Using the Baladi-Ruelle generalization of the Milnor-Thurnston kneading determinant, we provide the exact dynamical zeta function for such a map and compute the diffusion coefficient from its smallest zero.

Probabilistic calibration of safety coefficients for flawed components in nuclear engineering

International Nuclear Information System (INIS)

Ardillon, E.; Pitner, P.; Barthelet, B.; Remond, A.

1996-01-01

The rules that are currently under application to verify the acceptance of flaws in nuclear components rely on deterministic criteria supposed to ensure the safe operating of plants. The interest of having a precise and reliable method to evaluate the safety margins and the integrity of components led Electricite de France to launch an approach to link directly safety coefficients with safety levels. This paper presents a probabilistic methodology to calibrate safety coefficients in relation to reliability target values. The proposed calibration procedure applies to the case of a ferritic flawed pipe using the R6 procedure for assessing the integrity of the structure. (authors). 5 refs., 5 figs

Probabilistic calibration of safety coefficients for flawed components in nuclear engineering

International Nuclear Information System (INIS)

Ardillon, E.; Pitner, P.; Barthelet, B.; Remond, A.

1995-01-01

The current rules applied to verify the flaws acceptance in nuclear components rely on deterministic criteria supposed to ensure the plant safe operation. The interest in have a precise and reliable method to evaluate the safety margins and the integrity of components led Electricite de France to launch an approach to link directly safety coefficients with safety levels. This paper presents a probabilistic methodology to calibrate safety coefficients in relation do reliability target values. The proposed calibration procedure applies to the case of a ferritic flawed pipe using the R 6 procedure for assessing the structure integrity. (author). 5 refs., 5 figs., 1 tab

Delay Mitigation in the Malaysian Housing Industry: A Structural Equation Modelling Approach

Directory of Open Access Journals (Sweden)

Chang Saar Chai

2015-01-01

Full Text Available The housing industry is one of the major contributors to the economy in Malaysia due to the constantly high housing demand. The housing demand has increased due to the rapid growth in population and urbanisation in the country. One of the major challenges in the housing industry is the late delivery of housing supply, which in some instances leads to sick and abandoned housing projects. Despite being extensively investigated, th in a negative impact, there is a strong need to review the housing delay mitigation measures practised in Malaysia. This paper aims to evaluate the current delay mitigation measures and its main objective is to explore the relationship between the mitigation measures and delay in housing via a Structural Equation Modelling (SEM approach. A questionnaire survey through an online survey tool was conducted across 13 states and three Federal Territories in Malaysia. The target respondents are the local authorities, developers, consultants (principal submitting persons and contractors. The findings show that 17 predictive, preventive, organisational or corrective. This paper demonstrates that preventive measures are the most influential mitigation measures for housing delivery delay.

Dielectronic and Trielectronic Recombination Rate Coefficients of Be-like Ar14+

Science.gov (United States)

Huang, Z. K.; Wen, W. Q.; Xu, X.; Mahmood, S.; Wang, S. X.; Wang, H. B.; Dou, L. J.; Khan, N.; Badnell, N. R.; Preval, S. P.; Schippers, S.; Xu, T. H.; Yang, Y.; Yao, K.; Xu, W. Q.; Chuai, X. Y.; Zhu, X. L.; Zhao, D. M.; Mao, L. J.; Ma, X. M.; Li, J.; Mao, R. S.; Yuan, Y. J.; Wu, B.; Sheng, L. N.; Yang, J. C.; Xu, H. S.; Zhu, L. F.; Ma, X.

2018-03-01

Electron–ion recombination of Be-like 40Ar14+ has been measured by employing the electron–ion merged-beams method at the cooler storage ring CSRm. The measured absolute recombination rate coefficients for collision energies from 0 to 60 eV are presented, covering all dielectronic recombination (DR) resonances associated with 2s 2 → 2s2p core transitions. In addition, strong trielectronic recombination (TR) resonances associated with 2s 2 → 2p 2 core transitions were observed. Both DR and TR processes lead to series of peaks in the measured recombination spectrum, which have been identified by the Rydberg formula. Theoretical calculations of recombination rate coefficients were performed using the state-of-the-art multi-configuration Breit–Pauli atomic structure code AUTOSTRUCTURE to compare with the experimental results. The plasma rate coefficients for DR+TR of Ar14+ were deduced from the measured electron–ion recombination rate coefficients in the temperature range from 103 to 107 K, and compared with calculated data from the literature. The experimentally derived plasma rate coefficients are 60% larger and 30% lower than the previously recommended atomic data for the temperature ranges of photoionized plasmas and collisionally ionized plasmas, respectively. However, good agreement was found between experimental results and the calculations by Gu and Colgan et al. The plasma rate coefficients deduced from experiment and calculated by the current AUTOSTRUCTURE code show agreement that is better than 30% from 104 to 107 K. The present results constitute a set of benchmark data for use in astrophysical modeling.

Quadrature formulas for Fourier coefficients

KAUST Repository

Bojanov, Borislav

2009-09-01

We consider quadrature formulas of high degree of precision for the computation of the Fourier coefficients in expansions of functions with respect to a system of orthogonal polynomials. In particular, we show the uniqueness of a multiple node formula for the Fourier-Tchebycheff coefficients given by Micchelli and Sharma and construct new Gaussian formulas for the Fourier coefficients of a function, based on the values of the function and its derivatives. © 2009 Elsevier B.V. All rights reserved.

Industry Consolidation and Future Airline Network Structures in Europe

Science.gov (United States)

Dennis, Nigel

2003-01-01

In the current downturn in demand for air travel, major airlines are revising and rationalizing their networks in an attempt to improve financial performance and strengthen their defences against both new entrants and traditional rivals. Expansion of commercial agreements or alliances with other airlines has become a key reaction to the increasingly competitive marketplace. In the absence, for regulatory reasons, of cross-border mergers these are the principal means by which the industry can consolidate internationally. This paper analyzes the developments which have been taking place and attempts to itentify the implications for airline network structures and the function of different hub airports. The range of services available to passengers in long-haul markets to/from Europe is evaluated before and after recent industry reorganization. Hubs are crucial to interlink the route networks of parmers in an alliance. However, duplication between nearby hub airports that find themselves within the same airline alliance can lead to loss of service at the weaker locations. The extent to which the alliance hubs in Europe duplicate or complement each other in terms of network coverage is assessed and this methodology also enables the optimal partnerships for "unattached" airlines to be identified. The future role of the various European hubs is considered under different scenarios of global alliance development. The paper concludes by considering possible longer-term developments. In an environment where the low-cost carriers will provide a major element of customer choice, it is suggested that the traditional airlines will retrench around their hubs, surrendering many secondary cities to the low-cost sector. Further reduction in the number of alliances could threaten more of the European hubs. For both regulatory and commercial reasons, the end result may be just one airline alliance - so recreating in the deregulated market the historic rule of IATA.

Determination of the frictional coefficient of the implant-antler interface: experimental approach.

Science.gov (United States)

Hasan, Istabrak; Keilig, Ludger; Staat, Manfred; Wahl, Gerhard; Bourauel, Christoph

2012-10-01

The similar bone structure of reindeer antler to human bone permits studying the osseointegration of dental implants in the jawbone. As the friction is one of the major factors that have a significant influence on the initial stability of immediately loaded dental implants, it is essential to define the frictional coefficient of the implant-antler interface. In this study, the kinetic frictional forces at the implant-antler interface were measured experimentally using an optomechanical setup and a stepping motor controller under different axial loads and sliding velocities. The corresponding mean values of the static and kinetic frictional coefficients were within the range of 0.5-0.7 and 0.3-0.5, respectively. An increase in the frictional forces with increasing applied axial loads was registered. The measurements showed an evidence of a decrease in the magnitude of the frictional coefficient with increasing sliding velocity. The results of this study provide a considerable assessment to clarify the suitable frictional coefficient to be used in the finite element contact analysis of antler specimens.

Reproducibility of The Random Incidence Absorption Coefficient Converted From the Sabine Absorption Coefficient

DEFF Research Database (Denmark)

Jeong, Cheol-Ho; Chang, Ji-ho

2015-01-01

largely depending on the test room. Several conversion methods for porous absorbers from the Sabine absorption coefficient to the random incidence absorption coefficient were suggested by considering the finite size of a test specimen and non-uniformly incident energy onto the specimen, which turned out...... resistivity optimization outperforms the surface impedance optimization in terms of the reproducibility....

Decree 190/997 Industry, Energy and Mining Ministry: it approve the project of the organize structure reformulation of the respective executant Units

International Nuclear Information System (INIS)

1997-01-01

In Ordinance 190 are about the approval of the reformulate of the organizational structure of the parenthesis 08 Ministry of Industry Energy and Mining that it will be integrated by the following Units executory:001 General Direction of Secretary,002 National Direction of Industrias,004 National Direction of the Property Industrial,007 National Direction of Mining and Geology,008Direction of Energy,009 National Direction of Handicrafts,Small and Medium Enterprises,011 National Direction of Technology Nuclear,del Parenthesis 08. The strategic objective ,organizational structure, structure of positions of work installation ,plan settles down in the whole Ministry.Special stress it is made to the sub paragraph 011 National Direction of Nuclear Technology being established their strategic objective support substantive to the nouns that Units Executory,organizational structure activities remains in the unit in execution in charge of third, structural of positions of work installation ,plan and flowchart of the new structure [es

Analysis of Energy Industry Upgrading in Northeast China

Science.gov (United States)

Liu, Xiao-jing; Ji, Yu-liang; Guan, Bai-feng; Jing, Xin

2018-02-01

Promoting regional economic growth and realizing the transformation of the mode of economic growth are in industrial upgrading essence The product is a carrier that represents a series of links of production, management and marketing behind the enterprise, and is a comprehensive reflection of the knowledge and ability of a country or region. Based on the industrial spatial structure, this paper visualizes the industrial space in Northeast China from 2005 to 2015, analyzes the comparative advantages of the energy industry in Northeast China, and examines the status quo of the upgrade of the energy industry according to the industrial upgrading status. Based on the industrial spatial structure, Industry intensity in the industrial space, put forward the future direction of the energy industry upgrade and upgrade path.

STRESS ANALYSIS IN CUTTING TOOLS COATED TiN AND EFFECT OF THE FRICTION COEFFICIENT IN TOOL-CHIP INTERFACE

Directory of Open Access Journals (Sweden)

Kubilay ASLANTAŞ

2003-02-01

Full Text Available The coated tools are regularly used in today's metal cutting industry. Because, it is well known that thin and hard coatings can reduce tool wear, improve tool life and productivity. Such coatings have significantly contributed to the improvements cutting economies and cutting tool performance through lower tool wear and reduced cutting forces. TiN coatings have especially high strength and low friction coefficients. During the cutting process, low friction coefficient reduce damage in cutting tool. In addition, maximum stress values between coating and substrate also decrease as the friction coefficient decreases. In the present study, stress analysis is carried out for HSS (High Speed Steel cutting tool coated with TiN. The effect of the friction coefficient between tool and chip on the stresses developed at the cutting tool surface and interface of coating and HSS is investigated. Damage zones during cutting process was also attempted to determine. Finite elements method is used for the solution of the problem and FRANC2D finite element program is selected for numerical solutions.

Hierarchical structure graphitic-like/MoS2 film as superlubricity material

Science.gov (United States)

Gong, Zhenbin; Jia, Xiaolong; Ma, Wei; Zhang, Bin; Zhang, Junyan

2017-08-01

Friction and wear result in a great amount of energy loss and the invalidation of mechanical parts, thus it is necessary to minimize friction in practical application. In this study, the graphitic-like/MoS2 films with hierarchical structure were synthesized by the combination of pulse current plasma chemical-vapor deposition and medium frequency unbalanced magnetron sputtering in preheated environment. This hierarchical structure composite with multilayer nano sheets endows the films excellent tribological performance, which easily achieves macro superlubricity (friction coefficient ∼0.004) under humid air. Furthermore, it is expected that hierarchical structure of graphitic-like/MoS2 films could match the requirements of large scale, high bear-capacity and wear-resistance of actual working conditions, which could be widely used in the industrial production as a promising superlubricity material.

Measurements of recombination coefficient of hydrogen atoms on plasma deposited thin films

International Nuclear Information System (INIS)

Drenik, A.; Vesel, A.; Mozetic, M.

2006-01-01

We have performed experiments in plasma afterglow in order to determine the recombination coefficients of plasma deposited thin films of tungsten and graphite. Plasma deposited films rather than bulk material were used in order to more closely emulate surface structure of plasma-facing material deposits in fusion reactors. We have also determined the recombination coefficient of 85250 borosilicate glass and Teflon. Plasma was created by means of a radio frequency generator in a mixture of argon and hydrogen at the pressures between 60 Pa and 280 Pa. The degree of dissociation of hydrogen molecules was found to be between 0.1 and 1. The H-atom density was measured by Fiber Optic Catalytic Probe. The recombination coefficient was determined by measuring the axial profile of the H-atom density and using Smith's side arm diffusion model. (author)

Probabilistic estimation of splitting coefficients of normal modes of the Earth, and their uncertainties, using an autoregressive technique

Science.gov (United States)

Pachhai, S.; Masters, G.; Laske, G.

2017-12-01

Earth's normal-mode spectra are crucial to studying the long wavelength structure of the Earth. Such observations have been used extensively to estimate "splitting coefficients" which, in turn, can be used to determine the three-dimensional velocity and density structure. Most past studies apply a non-linear iterative inversion to estimate the splitting coefficients which requires that the earthquake source is known. However, it is challenging to know the source details, particularly for big events as used in normal-mode analyses. Additionally, the final solution of the non-linear inversion can depend on the choice of damping parameter and starting model. To circumvent the need to know the source, a two-step linear inversion has been developed and successfully applied to many mantle and core sensitive modes. The first step takes combinations of the data from a single event to produce spectra known as "receiver strips". The autoregressive nature of the receiver strips can then be used to estimate the structure coefficients without the need to know the source. Based on this approach, we recently employed a neighborhood algorithm to measure the splitting coefficients for an isolated inner-core sensitive mode (13S2). This approach explores the parameter space efficiently without any need of regularization and finds the structure coefficients which best fit the observed strips. Here, we implement a Bayesian approach to data collected for earthquakes from early 2000 and more recent. This approach combines the data (through likelihood) and prior information to provide rigorous parameter values and their uncertainties for both isolated and coupled modes. The likelihood function is derived from the inferred errors of the receiver strips which allows us to retrieve proper uncertainties. Finally, we apply model selection criteria that balance the trade-offs between fit (likelihood) and model complexity to investigate the degree and type of structure (elastic and anelastic

Drag Coefficient Estimation in Orbit Determination

Science.gov (United States)

McLaughlin, Craig A.; Manee, Steve; Lichtenberg, Travis

2011-07-01

Drag modeling is the greatest uncertainty in the dynamics of low Earth satellite orbits where ballistic coefficient and density errors dominate drag errors. This paper examines fitted drag coefficients found as part of a precision orbit determination process for Stella, Starlette, and the GEOSAT Follow-On satellites from 2000 to 2005. The drag coefficients for the spherical Stella and Starlette satellites are assumed to be highly correlated with density model error. The results using MSIS-86, NRLMSISE-00, and NRLMSISE-00 with dynamic calibration of the atmosphere (DCA) density corrections are compared. The DCA corrections were formulated for altitudes of 200-600 km and are found to be inappropriate when applied at 800 km. The yearly mean fitted drag coefficients are calculated for each satellite for each year studied. The yearly mean drag coefficients are higher for Starlette than Stella, where Starlette is at a higher altitude. The yearly mean fitted drag coefficients for all three satellites decrease as solar activity decreases after solar maximum.

Multi-charge-state molecular dynamics and self-diffusion coefficient in the warm dense matter regime

Science.gov (United States)

Fu, Yongsheng; Hou, Yong; Kang, Dongdong; Gao, Cheng; Jin, Fengtao; Yuan, Jianmin

2018-01-01

We present a multi-ion molecular dynamics (MIMD) simulation and apply it to calculating the self-diffusion coefficients of ions with different charge-states in the warm dense matter (WDM) regime. First, the method is used for the self-consistent calculation of electron structures of different charge-state ions in the ion sphere, with the ion-sphere radii being determined by the plasma density and the ion charges. The ionic fraction is then obtained by solving the Saha equation, taking account of interactions among different charge-state ions in the system, and ion-ion pair potentials are computed using the modified Gordon-Kim method in the framework of temperature-dependent density functional theory on the basis of the electron structures. Finally, MIMD is used to calculate ionic self-diffusion coefficients from the velocity correlation function according to the Green-Kubo relation. A comparison with the results of the average-atom model shows that different statistical processes will influence the ionic diffusion coefficient in the WDM regime.

Growth and Structure of Tanzania's Industrial Sector Investment and ...

African Journals Online (AJOL)

... agro-based industrial activities. Tanzania being basically an agricultural country such investment will have a multiplier effect in terms of employment generation partly due to the linkages effects which such industries might have to the rest of the economy. African Journal of Finance and Management Vol.8(2) 2000: 46-54 ...

Dynamics analysis of SIR epidemic model with correlation coefficients and clustering coefficient in networks.

Science.gov (United States)

Zhang, Juping; Yang, Chan; Jin, Zhen; Li, Jia

2018-07-14

In this paper, the correlation coefficients between nodes in states are used as dynamic variables, and we construct SIR epidemic dynamic models with correlation coefficients by using the pair approximation method in static networks and dynamic networks, respectively. Considering the clustering coefficient of the network, we analytically investigate the existence and the local asymptotic stability of each equilibrium of these models and derive threshold values for the prevalence of diseases. Additionally, we obtain two equivalent epidemic thresholds in dynamic networks, which are compared with the results of the mean field equations. Copyright © 2018 Elsevier Ltd. All rights reserved.

The influence of reactor core parameters on effective breeding coefficient Keff

Institute of Scientific and Technical Information of China (English)

Liu Li-Po; Liu Yi-Bao; Wang Juan; Yang Bo; Zhang Tao

2008-01-01

The values of effective breeding coefficient Keff in a reactor core of nuclear power plant are calculated for different values of parameters (core structure, fuel assembly component) by using the Monte Carlo method. The obtained values of Keff are compared and analysed, which can provide theoretical basis for reactor design.

Standards for Standardized Logistic Regression Coefficients

Science.gov (United States)

Menard, Scott

2011-01-01

Standardized coefficients in logistic regression analysis have the same utility as standardized coefficients in linear regression analysis. Although there has been no consensus on the best way to construct standardized logistic regression coefficients, there is now sufficient evidence to suggest a single best approach to the construction of a…

PM-HIP research for structural and pressuring retaining applications within the electric power industry

International Nuclear Information System (INIS)

Gandy, David W.

2015-01-01

For more than 60 years now, the nuclear power industry has relied on structural and pressure retaining materials generated via established manufacturing practices such as casting, plate rolling-and-welding, forging, drawing, and/or extrusion. During the past three years, EPRI has been leading the development and introduction of another established process, powder metallurgy and hot Isostatic pressing (PM/HIP), for pressure retaining applications in electric power industry. The research includes assessment of two primary alloys: 316L stainless steel and Grade 91 creep-strength enhanced ferritic steels, for introduction into the ASME Boiler and Pressure Vessel Code. Continuing DOE and EPRI research on other structural/pressure retaining alloys such as Alloy 690, SA 508 Class 1, Alloy 625, hard-facing materials, and others are also underway. This research will have a tremendous impact as we move forward over the next few decades on the selection of new alloys and components for advanced light water reactors and small modular reactors. Furthermore, fabrication of high alloy materials/components may require the use of new manufacturing processes to achieve acceptable properties for higher temperature applications such as those in Generation IV applications. Current research by EPRI and DOE will be reviewed and emphasis will be targeted at advanced applications where PM/HIP may be applied in the future. (authors)

Variation in aerodynamic coefficients with altitude

Science.gov (United States)

Shahid, Faiza; Hussain, Mukkarum; Baig, Mirza Mehmood; Haq, Ihtram ul

Precise aerodynamics performance prediction plays key role for a flying vehicle to get its mission completed within desired accuracy. Aerodynamic coefficients for same Mach number can be different at different altitude due to difference in Reynolds number. Prediction of these aerodynamics coefficients can be made through experiments, analytical solution or Computational Fluid Dynamics (CFD). Advancements in computational power have generated the concept of using CFD as a virtual Wind Tunnel (WT), hence aerodynamic performance prediction in present study is based upon CFD (numerical test rig). Simulations at different altitudes for a range of Mach numbers with zero angle of attack are performed to predict axial force coefficient behavior with altitude (Reynolds number). Similar simulations for a fixed Mach number '3' and a range of angle of attacks are also carried out to envisage the variation in normal force and pitching moment coefficients with altitude (Reynolds number). Results clearly depict that the axial force coefficient is a function of altitude (Reynolds number) and increase as altitude increases, especially for subsonic region. Variation in axial force coefficient with altitude (Reynolds number) slightly increases for larger values of angle of attacks. Normal force and pitching moment coefficients do not depend on altitude (Reynolds number) at smaller values of angle of attacks but show slight decrease as altitude increases. Present study suggests that variation of normal force and pitching moment coefficients with altitude can be neglected but the variation of axial force coefficient with altitude should be considered for vehicle fly in dense atmosphere. It is recommended to continue this study to more complex configurations for various Mach numbers with side slip and real gas effects.

The origins of American industrial success: Evidence from the US portland cement industry

OpenAIRE

Prentice, David

2008-01-01

The contributions of innovations, factor endowments and institutions to American industrialization are examined through analysing the rise of the American portland cement industry. Minerals abundance contributed in multiple ways to the spectacular rise of the industry from the 1890s. However, the results of a structural econometric analysis of entry suggests geological surveys, institutions highlighted by David and Wright, played a contributing rather than critical rol...

Industrial Performance of the Renewable Resources Industry in China

OpenAIRE

Dong Zhou; Xingang Zhao

2015-01-01

Promoting the development of renewable resources industry is an effective way to solve the problems of resources shortage and environmental pollution in China. In this paper, studies have found that “market structure” and “ownership structure”, namely “double structure”, is an important explanatory variable that affects industrial performance according to the “structure-conduct-performance” paradigm. Literature reviews have shown that large state-owned enterprises are playing an important rol...

The Competitive Market Structure of the U.S. Lodging Industry and its Impact on the Financial Performance of Hotel Brands

OpenAIRE

Matovic, Dragan

2002-01-01

The primary objective of this study was to explore the relationship among various market structure constructs (consisting of barriers to entry, competition, growth, and market share) and their potential impact on financial performance. By applying theoretical underpinnings from the disciplines of marketing, strategy and industrial organization economics, and adapting them to the unique characteristics of the U.S. lodging industry, the above constructs were linked to produce the Lodging Market...

Permeability and Diffusion Coefficients of Single Methyl Lactate Enantiomers in Nafion® and Cellophane Membranes Measured in Diffusion Cell.

Czech Academy of Sciences Publication Activity Database

Hovorka, Š.; Randová, A.; Borbášová, T.; Sysel, P.; Vychodilová, Hana; Červenková Šťastná, Lucie; Brožová, Libuše; Žitka, Jan; Storch, Jan; Kačírková, Marie; Drašar, P.; Izák, Pavel

2016-01-01

Roč. 158, JAN 28 (2016), s. 322-332 ISSN 1383-5866 R&D Projects: GA ČR(CZ) GAP106/12/0569 Institutional support: RVO:67985858 ; RVO:61389013 Keywords : diffusion coefficient measurement * permeability * nafion * cellophane * chirality of polymer membrane Subject RIV: CI - Industrial Chemistry, Chemical Engineering Impact factor: 3.359, year: 2016

Structural health monitoring and lifecycle-management for civil engineering constructions in power plants and industrial facilities; Zustandsueberwachung und Lebensdauermanagement von baulichen Einrichtungen in Kraftwerken und Industrieanlagen

Energy Technology Data Exchange (ETDEWEB)

Lehnen, Dieter; Demmer, Martin; Pfister, Tobias [ZERNA Planen und Pruefen GmbH, Bochum (Germany)

2013-09-01

In contrast to other fields of engineering, structural health monitoring and lifecycle management for civil engineering constructions in power plants and industrial facilities have to be developed yet. The necessity of this development immediately arises from the building regulations law with its extensive set of regulations as well as from economic constraints. Approaches and methods of structural health monitoring and lifecycle management for civil engineering constructions in power plants and industrial facilities could be improved intensively during recent years. The paper focuses on practical examples that show the necessity of comprehensive and strategic structural health monitoring in conjunction with lifecycle management for civil engineering constructions in power plants and industrial facilities unambiguously und clear. (orig.)

Entrepreneurial orientation and corporate governance structures at the firm level in the South African oil and gas industry

Directory of Open Access Journals (Sweden)

Vincent B. Molokwu

2013-03-01

Full Text Available Orientation: Corporate governance systems (CGS have been observed as one of the most important structures and mechanisms that regulate the relationships between executives and shareholders. By having well-defined and established CGS, company board members and executives are able to shape company vision and increase managerial commitment towards formulating strategies that espouse an entrepreneurial orientation (EO. Firms with high levels of EO tend to be innovative and encourage creative initiatives in new products and technology developments. Research purpose: In an emerging economy such as South Africa, one of the primary goals of an organisation is growth and good governance, which can be achieved through wellgoverned structures and continuous innovation in the face of challenges. This study identified potential links between the multidimensional constructs of CGS and EO at the firm level in the South African oil and gas industry. Motivation for the study: One of the greatest challenges faced by organisations when implementing CGS is to ensure compliance. Research design, approach and method: Board members and senior decision-makers were surveyed in the South African oil and gas industry, using a structured questionnaire. A series of correlational analyses were used to determine the strength of relationships between the dimensions of EO and CGS. Main findings: By drawing extensively on existing theory on EO, this study found that the different dimensions of CGS have a significant and positive relationship with each of the EO dimensions – innovation, risk-taking and proactiveness. Practical/managerial implications: Corporate boards supportive of entrepreneurship must provide appropriate reward systems, top management support, explicit goals and appropriate organisational values which signal to employees that entrepreneurial behaviour action is desirable. Practitioners should scrutinise their governance structures in their organisations to

Entrepreneurial orientation and corporate governance structures at the firm level in the South African oil and gas industry

Directory of Open Access Journals (Sweden)

Vincent B. Molokwu

2013-03-01

Full Text Available Orientation: Corporate governance systems (CGS have been observed as one of the most important structures and mechanisms that regulate the relationships between executives and shareholders. By having well-defined and established CGS, company board members and executives are able to shape company vision and increase managerial commitment towards formulating strategies that espouse an entrepreneurial orientation (EO. Firms with high levels of EO tend to be innovative and encourage creative initiatives in new products and technology developments.Research purpose: In an emerging economy such as South Africa, one of the primary goals of an organisation is growth and good governance, which can be achieved through wellgoverned structures and continuous innovation in the face of challenges. This study identified potential links between the multidimensional constructs of CGS and EO at the firm level in the South African oil and gas industry.Motivation for the study: One of the greatest challenges faced by organisations when implementing CGS is to ensure compliance.Research design, approach and method: Board members and senior decision-makers were surveyed in the South African oil and gas industry, using a structured questionnaire. A series of correlational analyses were used to determine the strength of relationships between the dimensions of EO and CGS.Main findings: By drawing extensively on existing theory on EO, this study found that the different dimensions of CGS have a significant and positive relationship with each of the EO dimensions – innovation, risk-taking and proactiveness.Practical/managerial implications: Corporate boards supportive of entrepreneurship must provide appropriate reward systems, top management support, explicit goals and appropriate organisational values which signal to employees that entrepreneurial behaviour action is desirable. Practitioners should scrutinise their governance structures in their organisations to ensure

Strategic Management of Technology and the Structuring of Industrial Networks

DEFF Research Database (Denmark)

Sørensen, Ole H.

The thesis explores the following question: 'How do actants in industrial companies partake in the enactment of locally embedded and globally reaching industrial networks through participation in technology development activities?' It draws on Actor Netwok Theories and analyses three case stories...... from the hearing aid industry. In one of the case stories is shown how three Danish companies became a 'centre of translation' by collaborating on the development of the software standard NOAH....

Monte Carlo simulation of diffuse attenuation coefficient in presence of non uniform profiles

Digital Repository Service at National Institute of Oceanography (India)

Desa, E; Desai, R.G.P.; Desa, B.A.E

This paper presents a Monte Carlo simulation of the vertical depth structure of the downward attenuation coefficient (K sub(d)), and the irradiance reflectance (R) for a given profile of chlorophyll. The results are in quantitaive agreement...

Probabilistic optimization of safety coefficients

International Nuclear Information System (INIS)

Marques, M.; Devictor, N.; Magistris, F. de

1999-01-01

This article describes a reliability-based method for the optimization of safety coefficients defined and used in design codes. The purpose of the optimization is to determine the partial safety coefficients which minimize an objective function for sets of components and loading situations covered by a design rule. This objective function is a sum of distances between the reliability of the components designed using the safety coefficients and a target reliability. The advantage of this method is shown on the examples of the reactor vessel, a vapour pipe and the safety injection circuit. (authors)

Estimation of the simple correlation coefficient.

Science.gov (United States)

Shieh, Gwowen

2010-11-01

This article investigates some unfamiliar properties of the Pearson product-moment correlation coefficient for the estimation of simple correlation coefficient. Although Pearson's r is biased, except for limited situations, and the minimum variance unbiased estimator has been proposed in the literature, researchers routinely employ the sample correlation coefficient in their practical applications, because of its simplicity and popularity. In order to support such practice, this study examines the mean squared errors of r and several prominent formulas. The results reveal specific situations in which the sample correlation coefficient performs better than the unbiased and nearly unbiased estimators, facilitating recommendation of r as an effect size index for the strength of linear association between two variables. In addition, related issues of estimating the squared simple correlation coefficient are also considered.

Business coaching: challenges for an emerging industry

NARCIS (Netherlands)

Clegg, S.R.; Rhodes, C.G.; Kornberger, M.; Stilin, R.

2005-01-01

Purpose — To identify the distinguishing characteristics and future challenges for the business coaching industry in Australia. Design/methodology/approach — A telephone survey of business coaching firms was used to identify the main structural characteristics of the industry. Structured interviews

A hierarchical estimator development for estimation of tire-road friction coefficient.

Directory of Open Access Journals (Sweden)

Xudong Zhang

Full Text Available The effect of vehicle active safety systems is subject to the friction force arising from the contact of tires and the road surface. Therefore, an adequate knowledge of the tire-road friction coefficient is of great importance to achieve a good performance of these control systems. This paper presents a tire-road friction coefficient estimation method for an advanced vehicle configuration, four-motorized-wheel electric vehicles, in which the longitudinal tire force is easily obtained. A hierarchical structure is adopted for the proposed estimation design. An upper estimator is developed based on unscented Kalman filter to estimate vehicle state information, while a hybrid estimation method is applied as the lower estimator to identify the tire-road friction coefficient using general regression neural network (GRNN and Bayes' theorem. GRNN aims at detecting road friction coefficient under small excitations, which are the most common situations in daily driving. GRNN is able to accurately create a mapping from input parameters to the friction coefficient, avoiding storing an entire complex tire model. As for large excitations, the estimation algorithm is based on Bayes' theorem and a simplified "magic formula" tire model. The integrated estimation method is established by the combination of the above-mentioned estimators. Finally, the simulations based on a high-fidelity CarSim vehicle model are carried out on different road surfaces and driving maneuvers to verify the effectiveness of the proposed estimation method.

A hierarchical estimator development for estimation of tire-road friction coefficient.

Science.gov (United States)

Zhang, Xudong; Göhlich, Dietmar

2017-01-01

The effect of vehicle active safety systems is subject to the friction force arising from the contact of tires and the road surface. Therefore, an adequate knowledge of the tire-road friction coefficient is of great importance to achieve a good performance of these control systems. This paper presents a tire-road friction coefficient estimation method for an advanced vehicle configuration, four-motorized-wheel electric vehicles, in which the longitudinal tire force is easily obtained. A hierarchical structure is adopted for the proposed estimation design. An upper estimator is developed based on unscented Kalman filter to estimate vehicle state information, while a hybrid estimation method is applied as the lower estimator to identify the tire-road friction coefficient using general regression neural network (GRNN) and Bayes' theorem. GRNN aims at detecting road friction coefficient under small excitations, which are the most common situations in daily driving. GRNN is able to accurately create a mapping from input parameters to the friction coefficient, avoiding storing an entire complex tire model. As for large excitations, the estimation algorithm is based on Bayes' theorem and a simplified "magic formula" tire model. The integrated estimation method is established by the combination of the above-mentioned estimators. Finally, the simulations based on a high-fidelity CarSim vehicle model are carried out on different road surfaces and driving maneuvers to verify the effectiveness of the proposed estimation method.

Variation in aerodynamic coefficients with altitude

Directory of Open Access Journals (Sweden)

Faiza Shahid

Full Text Available Precise aerodynamics performance prediction plays key role for a flying vehicle to get its mission completed within desired accuracy. Aerodynamic coefficients for same Mach number can be different at different altitude due to difference in Reynolds number. Prediction of these aerodynamics coefficients can be made through experiments, analytical solution or Computational Fluid Dynamics (CFD. Advancements in computational power have generated the concept of using CFD as a virtual Wind Tunnel (WT, hence aerodynamic performance prediction in present study is based upon CFD (numerical test rig. Simulations at different altitudes for a range of Mach numbers with zero angle of attack are performed to predict axial force coefficient behavior with altitude (Reynolds number. Similar simulations for a fixed Mach number ‘3’ and a range of angle of attacks are also carried out to envisage the variation in normal force and pitching moment coefficients with altitude (Reynolds number. Results clearly depict that the axial force coefficient is a function of altitude (Reynolds number and increase as altitude increases, especially for subsonic region. Variation in axial force coefficient with altitude (Reynolds number slightly increases for larger values of angle of attacks. Normal force and pitching moment coefficients do not depend on altitude (Reynolds number at smaller values of angle of attacks but show slight decrease as altitude increases. Present study suggests that variation of normal force and pitching moment coefficients with altitude can be neglected but the variation of axial force coefficient with altitude should be considered for vehicle fly in dense atmosphere. It is recommended to continue this study to more complex configurations for various Mach numbers with side slip and real gas effects. Keywords: Mach number, Reynolds number, Blunt body, Altitude effect, Angle of attacks

Anomalous Seebeck coefficient in boron carbides

International Nuclear Information System (INIS)

Aselage, T.L.; Emin, D.; Wood, C.; Mackinnon, I.D.R.; Howard, I.A.

1987-01-01

Boron carbides exhibit an anomalously large Seebeck coefficient with a temperature coefficient that is characteristic of polaronic hopping between inequivalent sites. The inequivalence in the sites is associated with disorder in the solid. The temperature dependence of the Seebeck coefficient for materials prepared by different techniques provides insight into the nature of the disorder

Engineering magnetic polariton system with distributed coefficients: Applications to soliton management

International Nuclear Information System (INIS)

Kuetche, Victor K.; Nguepjouo, Francis T.; Kofane, Timoleon C.

2014-01-01

In the wake of the recent design of a powerful method for generating higher-dimensional evolution systems with distributed coefficients Kuetche (2014) [15] illustrated on the dynamics of the current-fed membrane of zero Young’s modulus, we construct the general Lax-representation of a new higher-dimensional coupled evolution equations with varying coefficients. Discussing the physical meanings of these equations, we show that the coupled system above describes the propagation of magnetic polaritons within saturated ferrites, resulting structurally from the fast-near adiabatic magnetization dynamics combined to the Maxwell’s equations. Accordingly, we address some practical issues of the nonautonomous soliton managements underlying in the fast remagnetization process of data inputs within magnetic memory devices

Data sources on landscape structure in a highly industrialized area

Directory of Open Access Journals (Sweden)

Mazurek Kinga

2015-03-01

Full Text Available Landscape may be described as a part of space characterized by a certain physiognomy, which is a dynamic system subject to evolution. An important factor influencing the type and condition of the landscape is human activity which shapes or rebuilds its structure. Interesting results may be obtained on comparison of archival cartographic materials with contemporary studies and zoning plans. The Upper Silesian Coal Basin is a region with a clearly transformed landscape. The determinant of the geographical environment transformation here is the anthropogenic factor. The study area includes the upper part of the Kłodnica catchment (229.6 sq km. The study is a review, and its aim is to systematize data sources used in the research on the transformation of landscape structure of a heavily industrialized area. In the first half of the nineteenth century created the "Urmesstischblätter" in the scale of 1:25 000. Afterwards preparations began to take new topographic images of the country (the "Messtischblätter". In the 1990s initiated the development of a new topographic map (in the scale of 1:10 000. Recent data source is for example the project CORINE Land Cover 2006. There are many of various sources of data on land cover. An important aspect is the proper selection of documents and maps, and their proper interpretation.

Environmental regulation and competition in the U.S. electricity industry

International Nuclear Information System (INIS)

Peck, S.C.; Weyant, J.P.

1990-01-01

The structural evolution of the electric utility industry, with reference to its dynamics with environmental regulation, is described, explicitly including suppliers to the industry, the consumers of the products of the industry, and the industries that produce substitutes for the products. The structure of the industry has changed dramatically over the years 1970-1990, and is likely to continue to evolve throughout the 1990s. This evolution has resulted from changes in the milieu within which the industry operates, for example changes in fuel and capital markets, as well as federal, state and local regulations governing its activities. The environmental regulations of the 1970s have had a significant impact on the structure, behavior and performance of the industry and changes in the structure have had a feedback effect on the types of environmental regulations likely to be successful within the industry in reducing emissions of SO 2 , NOx and CO 2 . This and numerous other studies using the framework designed by Michael Porter of the Harvard Business School have demonstrated that this expanded view of competition frequently provides a much better explanation for changes in industry structure and corporate strategy than conventional analyses. 10 refs., 3 figs

The structure of the nuclear industry

International Nuclear Information System (INIS)

Leaist, G.T.; Morisette, E.F.

1981-01-01

Since 1952, when Canadians began to study the application of reactors to power generation, the CANDU reactor design and the manufacturing and and engineering capability supporting it have evolved into a world-class technology. At present, Atomic Energy of Canada Ltd. works directly with provincial electrical utilities in developing their power reactor requirements. It assumes responsibility for the detailed design of the nuclear steam supply system of stations, undertakes some procurement activities, and may represent the utilities in licensing applications. The detailed design and supply of components for the remainder of the nuclear steam plant, as well as for the secondary plant, are provided in Ontario by Ontario Hydro together with manufacturers, and in Quebec and New Brunswick by private firms. Canadian utilities have always assumed the project managment function themselves, but with export sales AECL has taken turnkey responsiblity for either the nuclear steam plant or the complete power station. AECL owns design specifications and other documentation, the use of which it can license, but manufacturing technology resides with Canadian industry. Canadian manufacturers have supported AECL design licensing initiatives overseas. The Canadian nuclear industry's major problem is the current lack of a vigorous domestic market combined with an uncertain international one

Industry interactions of the electronic structure research community in Europe

OpenAIRE

Goldbeck, Gerhard

2014-01-01

This report explores the interactions of the academic Psi-k community with industry. The evidence presented is mainly based on a semi-quantitative survey and interviews of network members. All Psi-k board, working group and advisory group members, a total of about 120 people were invited to take part in the study, and 40 people responded, representing more than 400 scientists from 33 different institutions in 12 European countries. 90% of respondents work with industry. Main industry sectors ...

LIGNIN, STRUCTURE AND APPLICATIONS: DEPOLYMERIZATION METHODS FOR OBTAINING AROMATIC DERIVATIVES OF INDUSTRIAL INTEREST

Directory of Open Access Journals (Sweden)

Marvin Chávez-Sifontes

2013-12-01

Full Text Available In this article significant data related to the structural characteristics of lignin, the extraction and isolation processes from biomass, and also the characteristics of different types of commercial lignins are presented. The review focuses on the different depolymerization processes (hydrolysis, hydrogenolysis, hydrodeoxygenation, pyrolysis, among others up to now developed and investigated analyzing the different aromatic derivatives obtained in each case, as well as the interesting reactions some of them may undergo. Application possibilities for lignin and its derivatives in new industrial processes integrated into the bio-refinery of the future are finally assessed

Gini coefficient as a life table function

Directory of Open Access Journals (Sweden)

2003-06-01

Full Text Available This paper presents a toolkit for measuring and analyzing inter-individual inequality in length of life by Gini coefficient. Gini coefficient and four other inequality measures are defined on the length-of-life distribution. Properties of these measures and their empirical testing on mortality data suggest a possibility for different judgements about the direction of changes in the degree of inequality by using different measures. A new computational procedure for the estimation of Gini coefficient from life tables is developed and tested on about four hundred real life tables. The estimates of Gini coefficient are precise enough even for abridged life tables with the final age group of 85+. New formulae have been developed for the decomposition of differences between Gini coefficients by age and cause of death. A new method for decomposition of age-components into effects of mortality and composition of population by group is developed. Temporal changes in the effects of elimination of causes of death on Gini coefficient are analyzed. Numerous empirical examples show: Lorenz curves for Sweden, Russia and Bangladesh in 1995, proportional changes in Gini coefficient and four other measures of inequality for the USA in 1950-1995 and for Russia in 1959-2000. Further shown are errors of estimates of Gini coefficient when computed from various types of mortality data of France, Japan, Sweden and the USA in 1900-95, decompositions of the USA-UK difference in life expectancies and Gini coefficients by age and cause of death in 1997. As well, effects of elimination of major causes of death in the UK in 1951-96 on Gini coefficient, age-specific effects of mortality and educational composition of the Russian population on changes in life expectancy and Gini coefficient between 1979 and 1989. Illustrated as well are variations in life expectancy and Gini coefficient across 32 countries in 1996-1999 and associated changes in life expectancy and Gini

The HD+ dissociative recombination rate coefficient at low temperature

Directory of Open Access Journals (Sweden)

Wolf A.

2015-01-01

Full Text Available The effect of the rotational temperature of the ions is considered for low-energy dissociative recombination (DR of HD+. Merged beams measurements with HD+ ions of a rotational temperature near 300 K are compared to multichannel quantum defect theory calculations. The thermal DR rate coefficient for a Maxwellian electron velocity distribution is derived from the merged-beams data and compared to theoretical results for a range of rotational temperatures. Good agreement is found for the theory with 300 K rotational temperature. For a low-temperature plasma environment where also the rotational temperature assumes 10 K, theory predicts a considerably higher thermal DR rate coefficient. The origin of this is traced to predicted resonant structures of the collision-energy dependent DR cross section at few-meV collision energies for the particular case of HD+ ions in the rotational ground state.

Determination of the surface drag coefficient

DEFF Research Database (Denmark)

Mahrt, L.; Vickers, D.; Sun, J.L.

2001-01-01

This study examines the dependence of the surface drag coefficient on stability, wind speed, mesoscale modulation of the turbulent flux and method of calculation of the drag coefficient. Data sets over grassland, sparse grass, heather and two forest sites are analyzed. For significantly unstable...... conditions, the drag coefficient does not depend systematically on z/L but decreases with wind speed for fixed intervals of z/L, where L is the Obukhov length. Even though the drag coefficient for weak wind conditions is sensitive to the exact method of calculation and choice of averaging time, the decrease...... of the drag coefficient with wind speed occurs for all of the calculation methods. A classification of flux calculation methods is constructed, which unifies the most common previous approaches. The roughness length corresponding to the usual Monin-Obukhov stability functions decreases with increasing wind...

Aspects of the furniture industry in Ireland

OpenAIRE

Heanue, Kevin

2009-01-01

This dissertation examines aspects of networking, industrial organisation, innovation, and industrial agglomeration in the Irish furniture manufacturing industry. With its focus on firm behaviour, industrial organisation and industrial structure the research is located within the tradition of industrial economics. Based on heterodox economic perspectives and utilising a variety of methods (albeit principally case study based), the dissertation provides new theoretical and empirical knowle...

The changing structure of the electric power industry: Selected issues, 1998

International Nuclear Information System (INIS)

1998-07-01

More than 3,000 electric utilities in the United States provide electricity to sustain the Nation's economic growth and promote the well-being of its inhabitants. At the end of 1996, the net generating capability of the electric power industry stood at more than 776,000 megawatts. Sales to ultimate consumers in 1996 exceeded 3.1 trillion kilowatthours at a total cost of more than $210 billion. In addition, the industry added over 9 million new customers during the period from 1990 through 1996. The above statistics provide an indication of the size of the electric power industry. Propelled by events of the recent past, the industry is currently in the midst of changing from a vertically integrated and regulated monopoly to a functionally unbundled industry with a competitive market for power generation. Advances in power generation technology, perceived inefficiencies in the industry, large variations in regional electricity prices, and the trend to competitive markets in other regulated industries have all contributed to the transition. Industry changes brought on by this movement are ongoing, and the industry will remain in a transitional state for the next few years or more. During the transition, many issues are being examined, evaluated, and debated. This report focuses on three of them: how wholesale and retail prices have changed since 1990; the power and ability of independent system operators (ISOs) to provide transmission services on a nondiscriminatory basis; and how issues that affect consumer choice, including stranded costs and the determination of retail prices, may be handled either by the US Congress or by State legislatures

The changing structure of the electric power industry: Selected issues, 1998

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-07-01

More than 3,000 electric utilities in the United States provide electricity to sustain the Nation`s economic growth and promote the well-being of its inhabitants. At the end of 1996, the net generating capability of the electric power industry stood at more than 776,000 megawatts. Sales to ultimate consumers in 1996 exceeded 3.1 trillion kilowatthours at a total cost of more than $210 billion. In addition, the industry added over 9 million new customers during the period from 1990 through 1996. The above statistics provide an indication of the size of the electric power industry. Propelled by events of the recent past, the industry is currently in the midst of changing from a vertically integrated and regulated monopoly to a functionally unbundled industry with a competitive market for power generation. Advances in power generation technology, perceived inefficiencies in the industry, large variations in regional electricity prices, and the trend to competitive markets in other regulated industries have all contributed to the transition. Industry changes brought on by this movement are ongoing, and the industry will remain in a transitional state for the next few years or more. During the transition, many issues are being examined, evaluated, and debated. This report focuses on three of them: how wholesale and retail prices have changed since 1990; the power and ability of independent system operators (ISOs) to provide transmission services on a nondiscriminatory basis; and how issues that affect consumer choice, including stranded costs and the determination of retail prices, may be handled either by the US Congress or by State legislatures.