Comparison of Heavy Water Reactor Thermalhydraulic Code Predictions with Small Break LOCA Experimental Data

International Nuclear Information System (INIS)

2012-08-01

Activities within the frame of the IAEA's Technical Working Group on Advanced Technologies for HWRs (TWG-HWR) are conducted in a project within the IAEA's subprogramme on nuclear power reactor technology development. The objective of the activities on HWRs is to foster, within the frame of the TWG-HWR, information exchange and cooperative research on technology development for current and future HWRs, with an emphasis on safety, economics and fuel resource sustainability. One of the activities recommended by the TWG-HWR was an international standard problem exercise entitled Intercomparison and Validation of Computer Codes for Thermalhydraulics Safety Analyses. Intercomparison and validation of computer codes used in different countries for thermalhydraulics safety analyses will enhance the confidence in the predictions made by these codes. However, the intercomparison and validation exercise needs a set of reliable experimental data. Two RD-14M small break loss of coolant accident (SBLOCA) tests, simulating HWR LOCA behaviour, conducted by Atomic Energy of Canada Ltd (AECL), were selected for this validation project. This report provides a comparison of the results obtained from eight participating organizations from six countries (Argentina, Canada, China, India, Republic of Korea, and Romania), utilizing four different computer codes (ATMIKA, CATHENA, MARS-KS, and RELAP5). General conclusions are reached and recommendations made.

Comparison of european computer codes relative to the aerosol behavior in PWR containment buildings during severe core damage accidents. (Modelling of steam condensation on the particles)

International Nuclear Information System (INIS)

Bunz, H.; Dunbar, L.H.; Fermandjian, J.; Lhiaubet, G.

1987-11-01

An aerosol code comparison exercise was performed within the framework of the Commission of European Communities (Division of Safety of Nuclear Installations). This exercise, focused on the process of steam condensation onto the aerosols occurring in PWR containment buildings during severe core damage accidents, has allowed to understand the discrepancies between the results obtained. These discrepancies are due, in particular, to whether the curvature effect is modelled or not in the codes

Offshore Code Comparison Collaboration within IEA Wind Task 23: Phase IV Results Regarding Floating Wind Turbine Modeling; Preprint

Energy Technology Data Exchange (ETDEWEB)

Jonkman, J.; Larsen, T.; Hansen, A.; Nygaard, T.; Maus, K.; Karimirad, M.; Gao, Z.; Moan, T.; Fylling, I.

2010-04-01

Offshore wind turbines are designed and analyzed using comprehensive simulation codes that account for the coupled dynamics of the wind inflow, aerodynamics, elasticity, and controls of the turbine, along with the incident waves, sea current, hydrodynamics, and foundation dynamics of the support structure. This paper describes the latest findings of the code-to-code verification activities of the Offshore Code Comparison Collaboration, which operates under Subtask 2 of the International Energy Agency Wind Task 23. In the latest phase of the project, participants used an assortment of codes to model the coupled dynamic response of a 5-MW wind turbine installed on a floating spar buoy in 320 m of water. Code predictions were compared from load-case simulations selected to test different model features. The comparisons have resulted in a greater understanding of offshore floating wind turbine dynamics and modeling techniques, and better knowledge of the validity of various approximations. The lessons learned from this exercise have improved the participants' codes, thus improving the standard of offshore wind turbine modeling.

The intercomparison of aerosol codes

International Nuclear Information System (INIS)

Dunbar, I.H.; Fermandjian, J.; Gauvain, J.

1988-01-01

The behavior of aerosols in a reactor containment vessel following a severe accident could be an important determinant of the accident source term to the environment. Various processes result in the deposition of the aerosol onto surfaces within the containment, from where they are much less likely to be released. Some of these processes are very sensitive to particle size, so it is important to model the aerosol growth processes: agglomeration and condensation. A number of computer codes have been written to model growth and deposition processes. They have been tested against each other in a series of code comparison exercises. These exercises have investigated sensitivities to physical and numerical assumptions and have also proved a useful means of quality control for the codes. Various exercises in which code predictions are compared with experimental results are now under way

Simulation of hydrogen deflagration experiment – Benchmark exercise with lumped-parameter codes

Energy Technology Data Exchange (ETDEWEB)

Kljenak, Ivo, E-mail: ivo.kljenak@ijs.si [Jožef Stefan Institute, Jamova cesta 39, SI-1000 Ljubljana (Slovenia); Kuznetsov, Mikhail, E-mail: mike.kuznetsov@kit.edu [Karlsruhe Institute of Technology, Kaiserstraße 12, 76131 Karlsruhe (Germany); Kostka, Pal, E-mail: kostka@nubiki.hu [NUBIKI Nuclear Safety Research Institute, Konkoly-Thege Miklós út 29-33, 1121 Budapest (Hungary); Kubišova, Lubica, E-mail: lubica.kubisova@ujd.gov.sk [Nuclear Regulatory Authority of the Slovak Republic, Bajkalská 27, 82007 Bratislava (Slovakia); Maltsev, Mikhail, E-mail: maltsev_MB@aep.ru [JSC Atomenergoproekt, 1, st. Podolskykh Kursantov, Moscow (Russian Federation); Manzini, Giovanni, E-mail: giovanni.manzini@rse-web.it [Ricerca sul Sistema Energetico, Via Rubattino 54, 20134 Milano (Italy); Povilaitis, Mantas, E-mail: mantas.p@mail.lei.lt [Lithuania Energy Institute, Breslaujos g.3, 44403 Kaunas (Lithuania)

2015-03-15

Highlights: • Blind and open simulations of hydrogen combustion experiment in large-scale containment-like facility with different lumped-parameter codes. • Simulation of axial as well as radial flame propagation. • Confirmation of adequacy of lumped-parameter codes for safety analyses of actual nuclear power plants. - Abstract: An experiment on hydrogen deflagration (Upward Flame Propagation Experiment – UFPE) was proposed by the Jozef Stefan Institute (Slovenia) and performed in the HYKA A2 facility at the Karlsruhe Institute of Technology (Germany). The experimental results were used to organize a benchmark exercise for lumped-parameter codes. Six organizations (JSI, AEP, LEI, NUBIKI, RSE and UJD SR) participated in the benchmark exercise, using altogether four different computer codes: ANGAR, ASTEC, COCOSYS and ECART. Both blind and open simulations were performed. In general, all the codes provided satisfactory results of the pressure increase, whereas the results of the temperature show a wider dispersal. Concerning the flame axial and radial velocities, the results may be considered satisfactory, given the inherent simplification of the lumped-parameter description compared to the local instantaneous description.

Simulation of hydrogen deflagration experiment – Benchmark exercise with lumped-parameter codes

International Nuclear Information System (INIS)

Kljenak, Ivo; Kuznetsov, Mikhail; Kostka, Pal; Kubišova, Lubica; Maltsev, Mikhail; Manzini, Giovanni; Povilaitis, Mantas

2015-01-01

Highlights: • Blind and open simulations of hydrogen combustion experiment in large-scale containment-like facility with different lumped-parameter codes. • Simulation of axial as well as radial flame propagation. • Confirmation of adequacy of lumped-parameter codes for safety analyses of actual nuclear power plants. - Abstract: An experiment on hydrogen deflagration (Upward Flame Propagation Experiment – UFPE) was proposed by the Jozef Stefan Institute (Slovenia) and performed in the HYKA A2 facility at the Karlsruhe Institute of Technology (Germany). The experimental results were used to organize a benchmark exercise for lumped-parameter codes. Six organizations (JSI, AEP, LEI, NUBIKI, RSE and UJD SR) participated in the benchmark exercise, using altogether four different computer codes: ANGAR, ASTEC, COCOSYS and ECART. Both blind and open simulations were performed. In general, all the codes provided satisfactory results of the pressure increase, whereas the results of the temperature show a wider dispersal. Concerning the flame axial and radial velocities, the results may be considered satisfactory, given the inherent simplification of the lumped-parameter description compared to the local instantaneous description

Numerical Tokamak Project code comparison

International Nuclear Information System (INIS)

Waltz, R.E.; Cohen, B.I.; Beer, M.A.

1994-01-01

The Numerical Tokamak Project undertook a code comparison using a set of TFTR tokamak parameters. Local radial annulus codes of both gyrokinetic and gyrofluid types were compared for both slab and toroidal case limits assuming ion temperature gradient mode turbulence in a pure plasma with adiabatic electrons. The heat diffusivities were found to be in good internal agreement within ± 50% of the group average over five codes

International standard problem (ISP) No. 41. Containment iodine computer code exercise based on a radioiodine test facility (RTF) experiment

International Nuclear Information System (INIS)

2000-04-01

International Standard Problem (ISP) exercises are comparative exercises in which predictions of different computer codes for a given physical problem are compared with each other or with the results of a carefully controlled experimental study. The main goal of ISP exercises is to increase confidence in the validity and accuracy of the tools, which were used in assessing the safety of nuclear installations. Moreover, they enable code users to gain experience and demonstrate their competence. The ISP No. 41 exercise, computer code exercise based on a Radioiodine Test Facility (RTF) experiment on iodine behaviour in containment under severe accident conditions, is one of such ISP exercises. The ISP No. 41 exercise was borne at the recommendation at the Fourth Iodine Chemistry Workshop held at PSI, Switzerland in June 1996: 'the performance of an International Standard Problem as the basis of an in-depth comparison of the models as well as contributing to the database for validation of iodine codes'. [Proceedings NEA/CSNI/R(96)6, Summary and Conclusions NEA/CSNI/R(96)7]. COG (CANDU Owners Group), comprising AECL and the Canadian nuclear utilities, offered to make the results of a Radioiodine Test Facility (RTF) test available for such an exercise. The ISP No. 41 exercise was endorsed in turn by the FPC (PWG4's Task Group on Fission Product Phenomena in the Primary Circuit and the Containment), PWG4 (CSNI Principal Working Group on the Confinement of Accidental Radioactive Releases), and the CSNI. The OECD/NEA Committee on the Safety of Nuclear Installations (CSNI) has sponsored forty-five ISP exercises over the last twenty-four years, thirteen of them in the area of severe accidents. The criteria for the selection of the RTF test as a basis for the ISP-41 exercise were; (1) complementary to other RTF tests available through the PHEBUS and ACE programmes, (2) simplicity for ease of modelling and (3) good quality data. A simple RTF experiment performed under controlled

A CFD code comparison of wind turbine wakes

DEFF Research Database (Denmark)

Laan, van der, Paul Maarten; Storey, R. C.; Sørensen, Niels N.

2014-01-01

A comparison is made between the EllipSys3D and SnS CFD codes. Both codes are used to perform Large-Eddy Simulations (LES) of single wind turbine wakes, using the actuator disk method. The comparison shows that both LES models predict similar velocity deficits and stream-wise Reynolds-stresses fo...

An interlaboratory comparison exercise for organohalogens in marine mammal blubber

Energy Technology Data Exchange (ETDEWEB)

Kucklick, J.; Becker, P.; Pugh, R. [NIST, Hollings Marine Lab., Charleston (United States); Schantz, M.; Porter, B.; Wise, S. [NIST, Gaithersburg (United States); Rowles, T. [NOAA, Silversprings (United States)

2004-09-15

For analytical data generated on marine mammal tissues, such as blubber, harmonizing measurements of organohalogen compounds is very important. Often organohalogen data on marine mammal samples from different laboratories are combined to provide an indication of geographical trends or to help ascertain toxicological significance. In at least one study that combined data on organohalogen concentrations from marine mammal blubber to examine geographical trends, it was found that among laboratory variability contributed significantly to the observed data variability (Schwacke, personal communication). To help resolve such problems, NIST and the National Oceanic and Atmospheric Administration (NOAA) initiated an interlaboratory comparison exercise program patterned after the exercise described above but using marine mammal blubber as the exercise materials. The objective of this paper is to describe the exercises, summarize selected results, and discuss the value of these interterlaboratory comparison exercises. The exercises have been held on a small scale (<10 laboratories) starting in 1991 and on a larger scale (10 or more laboratories) starting in 1999. Twenty-four laboratories participated in the 2003 exercise.

24 CFR 200.926a - Residential building code comparison items.

Science.gov (United States)

2010-04-01

... 24 Housing and Urban Development 2 2010-04-01 2010-04-01 false Residential building code comparison items. 200.926a Section 200.926a Housing and Urban Development Regulations Relating to Housing and... § 200.926a Residential building code comparison items. HUD will review each local and State code...

A photon dominated region code comparison study

NARCIS (Netherlands)

Roellig, M.; Abel, N. P.; Bell, T.; Bensch, F.; Black, J.; Ferland, G. J.; Jonkheid, B.; Kamp, I.; Kaufman, M. J.; Le Bourlot, J.; Le Petit, F.; Meijerink, R.; Morata, O.; Ossenkopf, Volker; Roueff, E.; Shaw, G.; Spaans, M.; Sternberg, A.; Stutzki, J.; Thi, W.-F.; van Dishoeck, E. F.; van Hoof, P. A. M.; Viti, S.; Wolfire, M. G.

Aims. We present a comparison between independent computer codes, modeling the physics and chemistry of interstellar photon dominated regions (PDRs). Our goal was to understand the mutual differences in the PDR codes and their effects on the physical and chemical structure of the model clouds, and

The InterFrost benchmark of Thermo-Hydraulic codes for cold regions hydrology - first inter-comparison results

Science.gov (United States)

Grenier, Christophe; Roux, Nicolas; Anbergen, Hauke; Collier, Nathaniel; Costard, Francois; Ferrry, Michel; Frampton, Andrew; Frederick, Jennifer; Holmen, Johan; Jost, Anne; Kokh, Samuel; Kurylyk, Barret; McKenzie, Jeffrey; Molson, John; Orgogozo, Laurent; Rivière, Agnès; Rühaak, Wolfram; Selroos, Jan-Olof; Therrien, René; Vidstrand, Patrik

2015-04-01

The impacts of climate change in boreal regions has received considerable attention recently due to the warming trends that have been experienced in recent decades and are expected to intensify in the future. Large portions of these regions, corresponding to permafrost areas, are covered by water bodies (lakes, rivers) that interact with the surrounding permafrost. For example, the thermal state of the surrounding soil influences the energy and water budget of the surface water bodies. Also, these water bodies generate taliks (unfrozen zones below) that disturb the thermal regimes of permafrost and may play a key role in the context of climate change. Recent field studies and modeling exercises indicate that a fully coupled 2D or 3D Thermo-Hydraulic (TH) approach is required to understand and model the past and future evolution of landscapes, rivers, lakes and associated groundwater systems in a changing climate. However, there is presently a paucity of 3D numerical studies of permafrost thaw and associated hydrological changes, and the lack of study can be partly attributed to the difficulty in verifying multi-dimensional results produced by numerical models. Numerical approaches can only be validated against analytical solutions for a purely thermic 1D equation with phase change (e.g. Neumann, Lunardini). When it comes to the coupled TH system (coupling two highly non-linear equations), the only possible approach is to compare the results from different codes to provided test cases and/or to have controlled experiments for validation. Such inter-code comparisons can propel discussions to try to improve code performances. A benchmark exercise was initialized in 2014 with a kick-off meeting in Paris in November. Participants from USA, Canada, Germany, Sweden and France convened, representing altogether 13 simulation codes. The benchmark exercises consist of several test cases inspired by existing literature (e.g. McKenzie et al., 2007) as well as new ones. They

Lessons learnt from participation in international inter-comparison exercise for environmental radioactivity measurement

International Nuclear Information System (INIS)

Jha, S.K.; Pulhani, Vandana; Sartandel, Sangeeta

2016-06-01

Environmental Radioactivity Measurement Section of Health Physics Division is regularly carrying out surveillance of the radioactivity concentration in the environment. The laboratory participates in the inter-comparison exercises conducted by various international agencies for quality assurance and quality control of analytical estimations. This report summarizes the results of the analysis of radioactivity in environmental matrices of the inter-comparison exercises. The participation in inter-comparison exercises has demonstrated competence in radionuclide identification and estimations, equivalence with the results of other participating laboratories, validated adopted analytical methods, introduced traceability to measurement etc. at national and international level. (author)

Comparison of beam deposition for three neutral beam injection codes

International Nuclear Information System (INIS)

Wieland, R.M.; Houlberg, W.A.; Mense, A.T.

1979-03-01

The three neutral beam injection codes BEAM (Houlberg, ORNL), HOFR (Howe, ORNL), and FREYA (Post, PPPL) are compared with respect to the calculation of the fast ion deposition profile H(r). Only plasmas of circular cross section are considered, with injection confined to the mid-plane of the torus. The approximations inherent in each code are pointed out, and a series of comparisons varying several parameters (beam energy and radius, machine size, and injection angle) shows excellent agreement among all the codes. A cost comparison (execution time and memory requirements) is made which points out the relative merits of each code within the context of incorporation into a plasma transport simulation code

Comparison of results at area 1 and area 2 between different Swedish in-situ teams in the RESUME-95 exercise

Energy Technology Data Exchange (ETDEWEB)

Raeaef, C.L. [Malmoe Univ. Hospital, Lund Univ., Dept. of Radiation Physics (Sweden)

1997-12-31

In the beginning of 1996 the Department of Radiation Physics in Malmoe was commissioned by the Swedish Radiation Protection Institute to perform a compilation of the results obtained by the Swedish in-situ teams that participated in the RESUME-95 exercise. The aim of this survey is to study the coherence in the reported activity data between the groups. It is not the purpose to see this comparison as a performance ranking of individual laboratories. Any such comparison must be made with precaution since the teams generally have collected their data with different equipment and by different methods. In this work, all in-situ teams have been given code-names, where each team has been labelled a number from 1 to 5. For more details, the interested reader is referred to the internal reports made by each team that (supposedly) also are to be included in the major compilation of the in-situ gamma spectrometry in the RESUME-95 exercise by Danish Emergency Management Agency. (au).

Comparison of results at area 1 and area 2 between different Swedish in-situ teams in the RESUME-95 exercise

International Nuclear Information System (INIS)

Raeaef, C.L.

1997-01-01

In the beginning of 1996 the Department of Radiation Physics in Malmoe was commissioned by the Swedish Radiation Protection Institute to perform a compilation of the results obtained by the Swedish in-situ teams that participated in the RESUME-95 exercise. The aim of this survey is to study the coherence in the reported activity data between the groups. It is not the purpose to see this comparison as a performance ranking of individual laboratories. Any such comparison must be made with precaution since the teams generally have collected their data with different equipment and by different methods. In this work, all in-situ teams have been given code-names, where each team has been labelled a number from 1 to 5. For more details, the interested reader is referred to the internal reports made by each team that (supposedly) also are to be included in the major compilation of the in-situ gamma spectrometry in the RESUME-95 exercise by Danish Emergency Management Agency. (au)

Comparison of results at area 1 and area 2 between different Swedish in-situ teams in the RESUME-95 exercise

Energy Technology Data Exchange (ETDEWEB)

Raeaef, C L [Malmoe Univ. Hospital, Lund Univ., Dept. of Radiation Physics (Sweden)

1998-12-31

In the beginning of 1996 the Department of Radiation Physics in Malmoe was commissioned by the Swedish Radiation Protection Institute to perform a compilation of the results obtained by the Swedish in-situ teams that participated in the RESUME-95 exercise. The aim of this survey is to study the coherence in the reported activity data between the groups. It is not the purpose to see this comparison as a performance ranking of individual laboratories. Any such comparison must be made with precaution since the teams generally have collected their data with different equipment and by different methods. In this work, all in-situ teams have been given code-names, where each team has been labelled a number from 1 to 5. For more details, the interested reader is referred to the internal reports made by each team that (supposedly) also are to be included in the major compilation of the in-situ gamma spectrometry in the RESUME-95 exercise by Danish Emergency Management Agency. (au).

Review and comparison of WWER and LWR Codes and Standards

International Nuclear Information System (INIS)

Buckthorpe, D.; Tashkinov, A.; Brynda, J.; Davies, L.M.; Cueto-Felgeueroso, C.; Detroux, P.; Bieniussa, K.; Guinovart, J.

2003-01-01

The results of work on a collaborative project on comparison of Codes and Standards used for safety related components of the WWER and LWR type reactors is presented. This work was performed on behalf of the European Commission, Working Group Codes and Standards and considers areas such as rules, criteria and provisions, failure mechanisms , derivation and understanding behind the fatigue curves, piping, materials and aging, manufacturing and ISI. WWERs are essentially designed and constructed using the Russian PNAE Code together with special provisions in a few countries (e.g. Czech Republic) from national standards. The LWR Codes have a strong dependence on the ASME Code. Also within Western Europe other codes are used including RCC-M, KTA and British Standards. A comparison of procedures used in all these codes and standards have been made to investigate the potential for equivalencies between the codes and any grounds for future cooperation between eastern and western experts in this field. (author)

Atmospheric Correction Inter-Comparison Exercise

Directory of Open Access Journals (Sweden)

Georgia Doxani

2018-02-01

Full Text Available The Atmospheric Correction Inter-comparison eXercise (ACIX is an international initiative with the aim to analyse the Surface Reflectance (SR products of various state-of-the-art atmospheric correction (AC processors. The Aerosol Optical Thickness (AOT and Water Vapour (WV are also examined in ACIX as additional outputs of AC processing. In this paper, the general ACIX framework is discussed; special mention is made of the motivation to initiate the experiment, the inter-comparison protocol, and the principal results. ACIX is free and open and every developer was welcome to participate. Eventually, 12 participants applied their approaches to various Landsat-8 and Sentinel-2 image datasets acquired over sites around the world. The current results diverge depending on the sensors, products, and sites, indicating their strengths and weaknesses. Indeed, this first implementation of processor inter-comparison was proven to be a good lesson for the developers to learn the advantages and limitations of their approaches. Various algorithm improvements are expected, if not already implemented, and the enhanced performances are yet to be assessed in future ACIX experiments.

Field-based tests of geochemical modeling codes: New Zealand hydrothermal systems

International Nuclear Information System (INIS)

Bruton, C.J.; Glassley, W.E.; Bourcier, W.L.

1993-12-01

Hydrothermal systems in the Taupo Volcanic Zone, North Island, New Zealand are being used as field-based modeling exercises for the EQ3/6 geochemical modeling code package. Comparisons of the observed state and evolution of the hydrothermal systems with predictions of fluid-solid equilibria made using geochemical modeling codes will determine how the codes can be used to predict the chemical and mineralogical response of the environment to nuclear waste emplacement. Field-based exercises allow us to test the models on time scales unattainable in the laboratory. Preliminary predictions of mineral assemblages in equilibrium with fluids sampled from wells in the Wairakei and Kawerau geothermal field suggest that affinity-temperature diagrams must be used in conjunction with EQ6 to minimize the effect of uncertainties in thermodynamic and kinetic data on code predictions

Pretest aerosol code comparisons for LWR aerosol containment tests LA1 and LA2

International Nuclear Information System (INIS)

Wright, A.L.; Wilson, J.H.; Arwood, P.C.

1986-01-01

The Light-Water-Reactor (LWR) Aerosol Containment Experiments (LACE) are being performed in Richland, Washington, at the Hanford Engineering Development Laboratory (HEDL) under the leadership of an international project board and the Electric Power Research Institute. These tests have two objectives: (1) to investigate, at large scale, the inherent aerosol retention behavior in LWR containments under simulated severe accident conditions, and (2) to provide an experimental data base for validating aerosol behavior and thermal-hydraulic computer codes. Aerosol computer-code comparison activities are being coordinated at the Oak Ridge National Laboratory. For each of the six LACE tests, ''pretest'' calculations (for code-to-code comparisons) and ''posttest'' calculations (for code-to-test data comparisons) are being performed. The overall goals of the comparison effort are (1) to provide code users with experience in applying their codes to LWR accident-sequence conditions and (2) to evaluate and improve the code models

PFLOTRAN-RepoTREND Source Term Comparison Summary.

Energy Technology Data Exchange (ETDEWEB)

Frederick, Jennifer M

2018-03-01

Code inter-comparison studies are useful exercises to verify and benchmark independently developed software to ensure proper function, especially when the software is used to model high-consequence systems which cannot be physically tested in a fully representative environment. This summary describes the results of the first portion of the code inter-comparison between PFLOTRAN and RepoTREND, which compares the radionuclide source term used in a typical performance assessment.

Comparison of neutron spectrum unfolding codes

International Nuclear Information System (INIS)

Zijp, W.

1979-02-01

This final report contains a set of four ECN-reports. The first is dealing with the comparison of the neutron spectrum unfolding codes CRYSTAL BALL, RFSP-JUL, SAND II and STAY'SL. The other three present the results of calculations about the influence of statistical weights in CRYSTAL BALL, SAND II and RFSP-JUL

Comparison of computer code calculations with FEBA test data

International Nuclear Information System (INIS)

Zhu, Y.M.

1988-06-01

The FEBA forced feed reflood experiments included base line tests with unblocked geometry. The experiments consisted of separate effect tests on a full-length 5x5 rod bundle. Experimental cladding temperatures and heat transfer coefficients of FEBA test No. 216 are compared with the analytical data postcalculated utilizing the SSYST-3 computer code. The comparison indicates a satisfactory matching of the peak cladding temperatures, quench times and heat transfer coefficients for nearly all axial positions. This agreement was made possible by the use of an artificially adjusted value of the empirical code input parameter in the heat transfer for the dispersed flow regime. A limited comparison of test data and calculations using the RELAP4/MOD6 transient analysis code are also included. In this case the input data for the water entrainment fraction and the liquid weighting factor in the heat transfer for the dispersed flow regime were adjusted to match the experimental data. On the other hand, no fitting of the input parameters was made for the COBRA-TF calculations which are included in the data comparison. (orig.) [de

Field-based tests of geochemical modeling codes usign New Zealand hydrothermal systems

International Nuclear Information System (INIS)

Bruton, C.J.; Glassley, W.E.; Bourcier, W.L.

1994-06-01

Hydrothermal systems in the Taupo Volcanic Zone, North Island, New Zealand are being used as field-based modeling exercises for the EQ3/6 geochemical modeling code package. Comparisons of the observed state and evolution of the hydrothermal systems with predictions of fluid-solid equilibria made using geochemical modeling codes will determine how the codes can be used to predict the chemical and mineralogical response of the environment to nuclear waste emplacement. Field-based exercises allow us to test the models on time scales unattainable in the laboratory. Preliminary predictions of mineral assemblages in equilibrium with fluids sampled from wells in the Wairakei and Kawerau geothermal field suggest that affinity-temperature diagrams must be used in conjunction with EQ6 to minimize the effect of uncertainties in thermodynamic and kinetic data on code predictions

Final Report for the FUMEX-III Exercise with the TRANSURANUS Code

International Nuclear Information System (INIS)

Van Uffelen, P.; Schubert, A.; Van de Laar, J.; Di Marcello, V.

2013-01-01

This report describes the results of the fourth round robin exercise organized by the IAEA for the LWR fuel behaviour codes. The previous exercise was organized by the IAEA in 2002-2007. ITU contributed to the IAEA FUMEX- II co-ordinated research project (CRP) by: - The development of a high burn-up TRANSURANUS-WWER Version - Verification of the TRANSURANUS-WWER Version for WWER-1000 reactors - Further verification of the TRANSURANUS Code by selected irradiations from the IFPE Database - Transfer of latest ITU knowledge in the following areas: high burnup effects and MOX behaviour as far as confidentiality is not concerned. Within the FUMEX-III project this work continues by: - Knowledge transfer and release of the TRANSURANUS code to safety authorities in several neighbouring countries of the European Union - Further verification of the TRANSURANUS Code by selected irradiations from the IFPE Database: extending the verification of the TRANSURANUS code on the basis of the cases related to the behaviour of high burnup UO 2 fuel, Gd-containing UO 2 fuel and MOX fuel under normal operating conditions in LWRs, including WWER. The simulation of the pellet-cladding mechanical interaction received particular attention. - Extending the TRANSURANUS code for simulation of fuel rods under accidental conditions, such as a loss of coolant accidents (LOCA) and a Reactivity Initiated Accident (RIA), for which various code improvements have been implemented and other changes are still under development. During the entire period of the CRP, ITU has carried out all priority cases, except for IFA-519 for which insufficient data have been provided. All these results are considered in this report. However, in order to limit the redundancy of work of various TRANSURANUS users involved in the FUMEX-III CRP, ITU has co-ordinated part of the work of the partners in Bulgaria, Romania and Italy. More precisely, the work on the WWER version of the code has been carried out in collaboration

Coding for dummies

CERN Document Server

Abraham, Nikhil

2015-01-01

Hands-on exercises help you learn to code like a pro No coding experience is required for Coding For Dummies,your one-stop guide to building a foundation of knowledge inwriting computer code for web, application, and softwaredevelopment. It doesn't matter if you've dabbled in coding or neverwritten a line of code, this book guides you through the basics.Using foundational web development languages like HTML, CSS, andJavaScript, it explains in plain English how coding works and whyit's needed. Online exercises developed by Codecademy, a leading online codetraining site, help hone coding skill

THE EXPERIENCE OF COMPARISON OF STATIC SECURITY CODE ANALYZERS

Directory of Open Access Journals (Sweden)

Alexey Markov

2015-09-01

Full Text Available This work presents a methodological approach to comparison of static security code analyzers. It substantiates the comparison of the static analyzers as to efficiency and functionality indicators, which are stipulated in the international regulatory documents. The test data for assessment of static analyzers efficiency is represented by synthetic sets of open-source software, which contain vulnerabilities. We substantiated certain criteria for quality assessment of the static security code analyzers subject to standards NIST SP 500-268 and SATEC. We carried out experiments that allowed us to assess a number of the Russian proprietary software tools and open-source tools. We came to the conclusion that it is of paramount importance to develop Russian regulatory framework for testing software security (firstly, for controlling undocumented features and evaluating the quality of static security code analyzers.

An analysis of the CSNI/GREST core concrete interaction chemical thermodynamic benchmark exercise using the MPEC2 computer code

International Nuclear Information System (INIS)

Muramatsu, Ken; Kondo, Yasuhiko; Uchida, Masaaki; Soda, Kunihisa

1989-01-01

Fission product (EP) release during a core concrete interaction (CCI) is an important factor of the uncertainty associated with a source term estimation for an LWR severe accident. An analysis was made on the CCI Chemical Thermodynamic Benchmark Exercise organized by OECD/NEA/CSNI Group of Experts on Source Terms (GREST) for investigating the uncertainty in thermodynamic modeling for CCI. The benchmark exercise was to calculate the equilibrium FP vapor pressure for given system of temperature, pressure, and debris composition. The benchmark consisted of two parts, A and B. Part A was a simplified problem intended to test the numerical techniques. In part B, the participants were requested to use their own best estimate thermodynamic data base to examine the variability of the results due to the difference in thermodynamic data base. JAERI participated in this benchmark exercise with use of the MPEC2 code. Chemical thermodynamic data base needed for analysis of Part B was taken from the VENESA code. This report describes the computer code used, inputs to the code, and results from the calculation by JAERI. The present calculation indicates that the FP vapor pressure depends strongly on temperature and Oxygen potential in core debris and the pattern of dependency may be different for different FP elements. (author)

Application of ADINAT/ADINA and MINIMEF codes to the resolution of the different exercises of COSA project

International Nuclear Information System (INIS)

1989-01-01

This report deals with the activities developed by the working group of the Escuela Tecnica Superior de Ingenieros de Minas de Madrid (E.T.S.I.M.M.) in collaboration with ENRESA within the framework of COSA project organised by the CEC. The ENRESA/ETSIMM working group became involved in the project under contract with the CEC the beginning of the phase named COSA II. For this reason it has been necessary to intensify the efforts in order to carry out, whithin the time available, the benchmarks corresponding to the previous phase COSA I. In this sense, the experience and results obtained by other european groups participating in the project, have proved to be very useful. The benchmarks cases for the different exercises were solved using the commercially available code ADINAT/ADINA and also the code developed by ETSIMM from the code named MINIMEF. In this report, in first place, a brief description of MINIMEF code is presented. A description of ADINA/ADINAT codes has not been included as these codes are well known. Next, the different benchmarks used, shall be described. The first two belong to the COSA I exercise while the latter is the one solved in the COSA II phase. All the results showed satisfactory as compared with those obtained by other working groups

OECD/DOE/CEA VVER-1000 coolant transient (V1000CT) benchmark for assessing coupled neutronics/thermal-hydraulics system codes for VVER-1000 RIA analysis

International Nuclear Information System (INIS)

Ivanov, B.; Ivanov, K.; Aniel, S.; Royer, E.; Kolev, N.; Groudev, P.

2004-01-01

The present paper describes the two phases of the OECD/DOE/CEA VVER-1000 coolant transient benchmark labeled as V1000CT. This benchmark is based on a data from the Bulgarian Kozloduy NPP Unit 6. The first phase of the benchmark was designed for the purpose of assessing neutron kinetics and thermal-hydraulic modeling for a VVER-1000 reactor, and specifically for their use in analyzing reactivity transients in a VVER-1000 reactor. Most of the results of Phase 1 will be compared against experimental data and the rest of the results will be used for code-to-code comparison. The second phase of the benchmark is planned for evaluation and improvement of the mixing computational models. Code-to-code and code-to-data comparisons will be done based on data of a mixing experiment conducted at Kozloduy-6. Main steam line break will be also analyzed in the second phase of the V1000CT benchmark. The results from it will be used for code-to-code comparison. The benchmark team has been involved in analyzing different aspects and performing sensitivity studies of the different benchmark exercises. The paper presents a comparison of selected results, obtained with two different system thermal-hydraulics codes, with the plant data for the Exercise 1 of Phase 1 of the benchmark as well as some results for Exercises 2 and 3. Overall, this benchmark has been well accepted internationally, with many organizations representing 11 countries participating in the first phase of the benchmark. (authors)

Comparison of Bit Error Rate of Line Codes in NG-PON2

Directory of Open Access Journals (Sweden)

Tomas Horvath

2016-05-01

Full Text Available This article focuses on simulation and comparison of line codes NRZ (Non Return to Zero, RZ (Return to Zero and Miller’s code for NG-PON2 (Next-Generation Passive Optical Network Stage 2 using. Our article provides solutions with Q-factor, BER (Bit Error Rate, and bandwidth comparison. Line codes are the most important part of communication over the optical fibre. The main role of these codes is digital signal representation. NG-PON2 networks use optical fibres for communication that is the reason why OptSim v5.2 is used for simulation.

OC3—Benchmark Exercise of Aero-elastic Offshore Wind Turbine Codes

Science.gov (United States)

Passon, P.; Kühn, M.; Butterfield, S.; Jonkman, J.; Camp, T.; Larsen, T. J.

2007-07-01

This paper introduces the work content and status of the first international investigation and verification of aero-elastic codes for offshore wind turbines as performed by the "Offshore Code Comparison Collaboration"(OC3) within the "IEA Wind Annex XXIII - Subtask 2". An overview is given on the state-of-the-art of the concerned offshore wind turbine simulation codes. Exemplary results of benchmark simulations from the first phase of the project are presented and discussed while subsequent phases are introduced. Furthermore, the paper discusses areas where differences between the codes have been identified and the sources of those differences, such as the differing theories implemented into the individual codes. Finally, further research and code development needs are presented based on the latest findings from the current state of the project.

A comparison of LOCA analysis using SMOKIN and CERBERUS codes

Energy Technology Data Exchange (ETDEWEB)

Younis, M H [Atomic Energy of Canada Ltd., Mississauga, ON (Canada); Gaboury, G [Ontario Hydro, Toronto, ON (Canada)

1996-12-31

This paper presents the results of a comparison of the analyses of a postulated Loss of Coolant Accident (LOCA) in Pickering NGS A reactors using the two neutron kinetics codes SMOKIN and CERBERUS. Both codes have been used to simulate the space-time neutronic behaviour of CANDU-PHWR reactors. The main objective of the present study is to evaluate the accuracy with which SMOKIN can predict power transients compared to CERBERUS. The comparison shows that the two codes produce similar bulk power and reactivity transients. However, SMOKIN was found to overestimate the power transient (relative to CERBERUS) in some regions of the core, which is indicative of the spatial differences between the two codes. It was demonstrated that part of this overestimate is due to the use of reaction-rate averaged fuel properties in SMOKIN, compared to instantaneous fuel properties in CERBERUS. (author). 5 refs., 3 tabs., 6 figs.

MOCCA Code for Star Cluster Simulation: Comparison with Optical Observations using COCOA

OpenAIRE

Askar, Abbas; Giersz, Mirek; Pych, Wojciech; Olech, Arkadiusz; Hypki, Arkadiusz

2014-01-01

We introduce and present preliminary results from COCOA (Cluster simulatiOn Comparison with ObservAtions) code for a star cluster after 12 Gyrs of evolution simulated using the MOCCA code. The COCOA code is being developed to quickly compare results of numerical simulations of star clusters with observational data. We use COCOA to obtain parameters of the projected cluster model. For comparison, a FITS file of the projected cluster was provided to observers so that they could use their observ...

An initial limited biodosimetry inter-comparison exercise: FOI and DRDC Ottawa

International Nuclear Information System (INIS)

Stricklin, D.; Wilkinson, D.; Arvidsson, E.; Prud'homme-Lalonde, L.; Thorleifson, E.; Mullins, D.; Lachapelle, S.

2007-01-01

While biodosimetry is a valuable tool in radiation dose assessment, the dicentric assay, which is the most validated method to date, requires some degree of technical competence. Recently published ISO guidelines indicate the need for documenting competence and establishment of quality control programs. Inter-laboratory comparisons are required to document the ability to perform reproducible and accurate assessments. FOI and DRDC Ottawa have conducted an initial limited biodosimetry exercise inter-comparison for quality assurance purposes. The exercise involved blinded exchange of three previously prepared slides from each laboratory from samples that had been evaluated for each lab's dose-response curve. Approximately 100 cells from each slide were evaluated and aberration frequencies reported and compared to the expected frequencies. The limited number of cells evaluated for each sample could not permit statistically distinguishing a 20% difference in all the samples. However, the results indicated reasonable agreement in analyses for all samples for triage purposes. Comparison of aberration frequencies, rather than dose estimates, further illustrates consistent scoring criteria between the two laboratories. The exercise conducted by FOI and DRDC Ottawa provided an efficient means of documenting expertise. Such cooperation further establishes the international biodosimetry network and ensures our readiness for emergency response

Exercise-induced bronchospasm: coding and billing for physician services.

Science.gov (United States)

Pohlig, Carol

2009-01-01

Physician reporting of the service to insurance companies for reimbursement is multifaceted and perplexing to those who do not understand the factors to consider. Test selection should be individualized based on the patient's history and/or needs. Federal regulations concerning physician supervision of diagnostic tests mandate different levels of physician supervision based on the type and complexity of the test. Many factors play a key role in physician claim submission. These include testing location, component services, coding edits, and additional visits. Medical necessity of the service(s) must also be demonstrated for payer consideration and reimbursement. The following article reviews various tests for exercise-induced bronchospasm and focuses on issues to assist the physician in reporting the services accurately and appropriately.

OECD/NEZ Main Steam Line Break Benchmark Problem Exercise I Simulation Using the SPACE Code with the Point Kinetics Model

International Nuclear Information System (INIS)

Kim, Yohan; Kim, Seyun; Ha, Sangjun

2014-01-01

The Safety and Performance Analysis Code for Nuclear Power Plants (SPACE) has been developed in recent years by the Korea Nuclear Hydro and Nuclear Power Co. (KHNP) through collaborative works with other Korean nuclear industries. The SPACE is a best-estimated two-phase three-field thermal-hydraulic analysis code to analyze the safety and performance of pressurized water reactors (PWRs). The SPACE code has sufficient features to replace outdated vendor supplied codes and to be used for the safety analysis of operating PWRs and the design of advanced reactors. As a result of the second phase of the development, the 2.14 version of the code was released through the successive various V and V works. The topical reports on the code and related safety analysis methodologies have been prepared for license works. In this study, the OECD/NEA Main Steam Line Break (MSLB) Benchmark Problem Exercise I was simulated as a V and V work. The results were compared with those of the participants in the benchmark project. The OECD/NEA MSLB Benchmark Problem Exercise I was simulated using the SPACE code. The results were compared with those of the participants in the benchmark project. Through the simulation, it was concluded that the SPACE code can effectively simulate PWR MSLB accidents

The health benefits of yoga and exercise: a review of comparison studies.

Science.gov (United States)

Ross, Alyson; Thomas, Sue

2010-01-01

Exercise is considered an acceptable method for improving and maintaining physical and emotional health. A growing body of evidence supports the belief that yoga benefits physical and mental health via down-regulation of the hypothalamic-pituitary-adrenal (HPA) axis and the sympathetic nervous system (SNS). The purpose of this article is to provide a scholarly review of the literature regarding research studies comparing the effects of yoga and exercise on a variety of health outcomes and health conditions. Using PubMed((R)) and the key word "yoga," a comprehensive search of the research literature from core scientific and nursing journals yielded 81 studies that met inclusion criteria. These studies subsequently were classified as uncontrolled (n = 30), wait list controlled (n = 16), or comparison (n = 35). The most common comparison intervention (n = 10) involved exercise. These studies were included in this review. In the studies reviewed, yoga interventions appeared to be equal or superior to exercise in nearly every outcome measured except those involving physical fitness. The studies comparing the effects of yoga and exercise seem to indicate that, in both healthy and diseased populations, yoga may be as effective as or better than exercise at improving a variety of health-related outcome measures. Future clinical trials are needed to examine the distinctions between exercise and yoga, particularly how the two modalities may differ in their effects on the SNS/HPA axis. Additional studies using rigorous methodologies are needed to examine the health benefits of the various types of yoga.

The SCEC/USGS dynamic earthquake rupture code verification exercise

Science.gov (United States)

Harris, R.A.; Barall, M.; Archuleta, R.; Dunham, E.; Aagaard, Brad T.; Ampuero, J.-P.; Bhat, H.; Cruz-Atienza, Victor M.; Dalguer, L.; Dawson, P.; Day, S.; Duan, B.; Ely, G.; Kaneko, Y.; Kase, Y.; Lapusta, N.; Liu, Yajing; Ma, S.; Oglesby, D.; Olsen, K.; Pitarka, A.; Song, S.; Templeton, E.

2009-01-01

Numerical simulations of earthquake rupture dynamics are now common, yet it has been difficult to test the validity of these simulations because there have been few field observations and no analytic solutions with which to compare the results. This paper describes the Southern California Earthquake Center/U.S. Geological Survey (SCEC/USGS) Dynamic Earthquake Rupture Code Verification Exercise, where codes that simulate spontaneous rupture dynamics in three dimensions are evaluated and the results produced by these codes are compared using Web-based tools. This is the first time that a broad and rigorous examination of numerous spontaneous rupture codes has been performed—a significant advance in this science. The automated process developed to attain this achievement provides for a future where testing of codes is easily accomplished.Scientists who use computer simulations to understand earthquakes utilize a range of techniques. Most of these assume that earthquakes are caused by slip at depth on faults in the Earth, but hereafter the strategies vary. Among the methods used in earthquake mechanics studies are kinematic approaches and dynamic approaches.The kinematic approach uses a computer code that prescribes the spatial and temporal evolution of slip on the causative fault (or faults). These types of simulations are very helpful, especially since they can be used in seismic data inversions to relate the ground motions recorded in the field to slip on the fault(s) at depth. However, these kinematic solutions generally provide no insight into the physics driving the fault slip or information about why the involved fault(s) slipped that much (or that little). In other words, these kinematic solutions may lack information about the physical dynamics of earthquake rupture that will be most helpful in forecasting future events.To help address this issue, some researchers use computer codes to numerically simulate earthquakes and construct dynamic, spontaneous

Data evaluation and code comparison activities

International Nuclear Information System (INIS)

Itikawa, Yukikazu; Takagi, Hidekazu; Nakamura, Yoshiharu; Imai, Makoto; Sasaki, Akira

2013-01-01

In atomic and molecular data base, intolerable numerical differences beyond error margin are found among some papers resulted from measurements or calculations even for the same collision processes. These differences spoil the reliability of the data base. This report describes the data evaluation for atomic and molecular data promoted by IAEA cooperated with other institutes, which Japanese researchers collaborate with. The reaction cross sections calculated numerically are evaluated for the collisions between electrons and molecular ions of H 2 + and HeH + . The application of an electron swarm parameter was shown for the evaluation and determination of the collision cross sections between electrons and molecules. In order to complete higher precision of atomic codes and a collisional-radiative model, IAEA held the workshop for the code comparison of the nonlocal thermodynamic equilibrium. (Y. Kazumata)

BER performance comparison of optical CDMA systems with/without turbo codes

Science.gov (United States)

Kulkarni, Muralidhar; Chauhan, Vijender S.; Dutta, Yashpal; Sinha, Ravindra K.

2002-08-01

In this paper, we have analyzed and simulated the BER performance of a turbo coded optical code-division multiple-access (TC-OCDMA) system. A performance comparison has been made between uncoded OCDMA and TC-OCDMA systems employing various OCDMA address codes (optical orthogonal codes (OOCs), Generalized Multiwavelength Prime codes (GMWPC's), and Generalized Multiwavelength Reed Solomon code (GMWRSC's)). The BER performance of TC-OCDMA systems has been analyzed and simulated by varying the code weight of address code employed by the system. From the simulation results, it is observed that lower weight address codes can be employed for TC-OCDMA systems that can have the equivalent BER performance of uncoded systems employing higher weight address codes for a fixed number of active users.

Comparison of elevated temperature design codes of ASME Subsection NH and RCC-MRx

Energy Technology Data Exchange (ETDEWEB)

Lee, Hyeong-Yeon, E-mail: hylee@kaeri.re.kr

2016-11-15

Highlights: • Comparison of elevated temperature design (ETD) codes was made. • Material properties and evaluation procedures were compared. • Two heat-resistant materials of Grade 91 steel and austenitic stainless steel 316 are the target materials in the present study. • Application of the ETD codes to Generation IV reactor components and a comparison of the conservatism was conducted. - Abstract: The elevated temperature design (ETD) codes are used for the design evaluation of Generation IV (Gen IV) reactor systems such as sodium-cooled fast reactor (SFR), lead-cooled fast reactor (LFR), and very high temperature reactor (VHTR). In the present study, ETD code comparisons were made in terms of the material properties and design evaluation procedures for the recent versions of the two major ETD codes, ASME Section III Subsection NH and RCC-MRx. Conservatism in the design evaluation procedures was quantified and compared based on the evaluation results for SFR components as per the two ETD codes. The target materials are austenitic stainless steel 316 and Mod.9Cr-1Mo steel, which are the major two materials in a Gen IV SFR. The differences in the design evaluation procedures as well as the material properties in the two ETD codes are highlighted.

WEC3: Wave Energy Converter Code Comparison Project: Preprint

Energy Technology Data Exchange (ETDEWEB)

Combourieu, Adrien; Lawson, Michael; Babarit, Aurelien; Ruehl, Kelley; Roy, Andre; Costello, Ronan; Laporte Weywada, Pauline; Bailey, Helen

2017-01-01

This paper describes the recently launched Wave Energy Converter Code Comparison (WEC3) project and present preliminary results from this effort. The objectives of WEC3 are to verify and validate numerical modelling tools that have been developed specifically to simulate wave energy conversion devices and to inform the upcoming IEA OES Annex VI Ocean Energy Modelling Verification and Validation project. WEC3 is divided into two phases. Phase 1 consists of a code-to-code verification and Phase II entails code-to-experiment validation. WEC3 focuses on mid-fidelity codes that simulate WECs using time-domain multibody dynamics methods to model device motions and hydrodynamic coefficients to model hydrodynamic forces. Consequently, high-fidelity numerical modelling tools, such as Navier-Stokes computational fluid dynamics simulation, and simple frequency domain modelling tools were not included in the WEC3 project.

Dynamic benchmarking of simulation codes

International Nuclear Information System (INIS)

Henry, R.E.; Paik, C.Y.; Hauser, G.M.

1996-01-01

output includes a plot of the MAAP calculation and the plant data. For the large integral experiments, a major part, but not all of the MAAP code is needed. These use an experiment specific benchmark routine that includes all of the information and boundary conditions for performing the calculation, as well as the information of which parts of MAAP are unnecessary and can be 'bypassed'. Lastly, the separate effects tests only require a few MAAP routines. These are exercised through their own specific benchmark routine that includes the experiment specific information and boundary conditions. This benchmark routine calls the appropriate MAAP routines from the source code, performs the calculations, including integration where necessary and provide the comparison between the MAAP calculation and the experimental observations. (author)

Performance of code 'FAIR' in IAEA CRP on FUMEX

International Nuclear Information System (INIS)

Swami Prasad, P.; Dutta, B.K.; Kushwaha, H.S.; Kakodkar, A.

1996-01-01

A modern fuel performance analysis code FAIR has been developed for analysing high burnup fuel pins of water/heavy water cooled reactors. The code employs finite element method for modelling thermo mechanical behaviour of fuel pins and mechanistic models for modelling various physical and chemical phenomena affecting the behaviour of nuclear reactor fuel pins. High burnup affects such as pellet thermal conductivity degradation, enhanced fission gas release and radial flux redistribution are incorporated in the code FAIR. The code FAIR is capable of performing statistical analysis of fuel pins using Monte Carlo technique. The code is implemented on BARC parallel processing system ANUPAM. The code has recently participated in an International Atomic Energy Agency (IAEA) coordinated research program (CRP) on fuel modelling at extended burnups (FUMEX). Nineteen agencies from different countries participated in this exercise. In this CRP, spread over a period of three years, a number of high burnup fuel pins irradiated at Halden reactor are analysed. The first phase of the CRP is a blind code comparison exercise, where the computed results are compared with experimental results. The second phase consists of modifications to the code based on the experimental results of first phase and statistical analysis of fuel pins. The performance of the code FAIR in this CRP has been very good. The present report highlights the main features of code FAIR and its performance in the IAEA CRP on FUMEX. 14 refs., 5 tabs., ills

Simulation of single-phase rod bundle flow. Comparison between CFD-code ESTET, PWR core code THYC and experimental results

International Nuclear Information System (INIS)

Mur, J.; Larrauri, D.

1998-07-01

Computer simulation of flow in configurations close to pressurized water reactor (PWR) geometry is of great interest for Electricite de France (EDF). Although simulation of the flow through a whole PWR core with an all purpose CFD-code is not yet achievable, such a tool cna be quite useful to perform numerical experiments in order to try and improve the modeling introduced in computer codes devoted to reactor core thermal-hydraulic analysis. Further to simulation in small bare rod bundle configurations, the present study is focused on the simulation, with CFD-code ESTET and PWR core code THYC, of the flow in the experimental configuration VATICAN-1. ESTET simulation results are compared on the one hand to local velocity and concentration measurements, on the other hand with subchannel averaged values calculated by THYC. As far as the comparison with measurements is concerned, ESTET results are quite satisfactory relatively to available experimental data and their uncertainties. The effect of spacer grids and the prediction of the evolution of an unbalanced velocity profile seem to be correctly treated. As far as the comparison with THYC subchannel averaged values is concerned, the difficulty of a direct comparison between subchannel averaged and local values is pointed out. ESTET calculated local values are close to experimental local values. ESTET subchannel averaged values are also close to THYC calculation results. Thus, THYC results are satisfactory whereas their direct comparison to local measurements could show some disagreement. (author)

Comparison of ANL containment codes with SNR-300 simulation experiments

International Nuclear Information System (INIS)

Marchertas, A.H.; Wang, C.Y.; Fistedis, S.H.

1976-01-01

A comparison of REXCO and ICECO code predictions is made with data obtained from experiments of LMFBR excursion models. The comparisons are based on published results of tests conducted for the safety analysis of the SNR-300 fast breeder. The test configurations consist of a centrally located spherical source immersed in a pool of water which is encased in a cylindrical container. The cylinical walls of the container are prestressed by holddown bolts which span the two rigid ends. The space above the surface of the water within the container is occupied by air. Although certain aspects of the tests could not be simulated by the analytical models exactly, the comparison of results shows quite close agreement. The fact that the REXCO and ICECO codes involve different analytical formulations, their own close correspondence of results lends added credence to the value of analytical predictions

Code comparison for accelerator design and analysis

International Nuclear Information System (INIS)

Parsa, Z.

1988-01-01

We present a comparison between results obtained from standard accelerator physics codes used for the design and analysis of synchrotrons and storage rings, with programs SYNCH, MAD, HARMON, PATRICIA, PATPET, BETA, DIMAD, MARYLIE and RACE-TRACK. In our analysis we have considered 5 (various size) lattices with large and small angles including AGS Booster (10/degree/ bend), RHIC (2.24/degree/), SXLS, XLS (XUV ring with 45/degree/ bend) and X-RAY rings. The differences in the integration methods used and the treatment of the fringe fields in these codes could lead to different results. The inclusion of nonlinear (e.g., dipole) terms may be necessary in these calculations specially for a small ring. 12 refs., 6 figs., 10 tabs

MOCCA code for star cluster simulation: comparison with optical observations using COCOA

Science.gov (United States)

Askar, Abbas; Giersz, Mirek; Pych, Wojciech; Olech, Arkadiusz; Hypki, Arkadiusz

2016-02-01

We introduce and present preliminary results from COCOA (Cluster simulatiOn Comparison with ObservAtions) code for a star cluster after 12 Gyr of evolution simulated using the MOCCA code. The COCOA code is being developed to quickly compare results of numerical simulations of star clusters with observational data. We use COCOA to obtain parameters of the projected cluster model. For comparison, a FITS file of the projected cluster was provided to observers so that they could use their observational methods and techniques to obtain cluster parameters. The results show that the similarity of cluster parameters obtained through numerical simulations and observations depends significantly on the quality of observational data and photometric accuracy.

Simulation of the OECD Main-Steam-Line-Break Benchmark Exercise 3 Using the Coupled RELAP5/PANTHER Codes

International Nuclear Information System (INIS)

Schneidesch, Christophe R.; Zhang Jinzhao

2004-01-01

The RELAP5 best-estimate thermal-hydraulic system code has been coupled with the PANTHER three-dimensional neutron kinetics code via the TALINK dynamic data exchange control and processing tool. The coupled RELAP5/PANTHER code package has been qualified and will be used at Tractebel Engineering (TE) for analyzing asymmetric pressurized water reactor (PWR) accidents with strong core-system interactions. The Organization for Economic Cooperation and Development/U.S. Nuclear Regulatory Commission PWR main-steam-line-break benchmark problem was analyzed as part of the qualification efforts to demonstrate the capability of the coupled code package of simulating such transients. This paper reports the main results of TE's contribution to the benchmark Exercise 3

Segmental wall-motion analysis in the right anterior oblique projection: comparison of exercise equilibrium radionuclide ventriculography and exercise contrast ventriculography

International Nuclear Information System (INIS)

Brady, T.J.; Thrall, J.H.; Keyes, J.W. Jr.; Brymer, J.F.; Walton, J.A.; Pitt, B.

1980-01-01

Thirty-nine patients with known or suspected coronary artery disease were studied at rest and during supine bicycle exercise with radionuclide and contrast left ventriculography. Analysis of regional wall motion was made by visual evaluation of the five standard 30 0 right anterior oblique (RAO) wall segments in the contrast images and the corresponding 10 0 RAO radionuclide segments. The radionuclide studies were evaluated independently by three observers using a five-point grading system. The interobserver wall-motion grading agreed completely in more than 80% of segments at rest and exercise, and agreed within one wall-motion grade in more than 95% of segments. The comparison of wall-motion grades between radionuclide and contrast ventriculograms showed complete agreement in 86% of segments at rest and in 78% during exercise, and agreement within one wall-motion grade in 97% of rest and 96% of exercise segments. Visual evaluation of 10 0 RAO rest and exercise radionuclide ventriculograms compares favorably with rest and exercise 30 0 RAO contrast ventriculograms and demonstrates satisfactory interobserver agreement

A CFD code comparison of wind turbine wakes

International Nuclear Information System (INIS)

Van der Laan, M P; Sørensen, N N; Storey, R C; Cater, J E; Norris, S E

2014-01-01

A comparison is made between the EllipSys3D and SnS CFD codes. Both codes are used to perform Large-Eddy Simulations (LES) of single wind turbine wakes, using the actuator disk method. The comparison shows that both LES models predict similar velocity deficits and stream-wise Reynolds-stresses for four test cases. A grid resolution study, performed in EllipSys3D and SnS, shows that a minimal uniform cell spacing of 1/30 of the rotor diameter is necessary to resolve the wind turbine wake. In addition, the LES-predicted velocity deficits are also compared with Reynolds-Averaged Navier Stokes simulations using EllipSys3D for a test case that is based on field measurements. In these simulations, two eddy viscosity turbulence models are employed: the k-ε model and the k-ε-f p model. Where the k-ε model fails to predict the velocity deficit, the results of the k-ε-f P model show good agreement with both LES models and measurements

The Second Workshop on Lineshape Code Comparison: Isolated Lines

Directory of Open Access Journals (Sweden)

Spiros Alexiou

2014-05-01

Full Text Available In this work, we briefly summarize the theoretical aspects of isolated line broadening. We present and discuss test run comparisons from different participating lineshape codes for the 2s-2p transition for LiI, B III and NV.

The APS SASE FEL: modeling and code comparison

International Nuclear Information System (INIS)

Biedron, S. G.

1999-01-01

A self-amplified spontaneous emission (SASE) free-electron laser (FEL) is under construction at the Advanced Photon Source (APS). Five FEL simulation codes were used in the design phase: GENESIS, GINGER, MEDUSA, RON, and TDA3D. Initial comparisons between each of these independent formulations show good agreement for the parameters of the APS SASE FEL

Comparison of DT neutron production codes MCUNED, ENEA-JSI source subroutine and DDT

Energy Technology Data Exchange (ETDEWEB)

Čufar, Aljaž, E-mail: aljaz.cufar@ijs.si [Reactor Physics Department, Jožef Stefan Institute, Jamova cesta 39, SI-1000 Ljubljana (Slovenia); Lengar, Igor; Kodeli, Ivan [Reactor Physics Department, Jožef Stefan Institute, Jamova cesta 39, SI-1000 Ljubljana (Slovenia); Milocco, Alberto [Culham Centre for Fusion Energy, Culham Science Centre, Abingdon, OX14 3DB (United Kingdom); Sauvan, Patrick [Departamento de Ingeniería Energética, E.T.S. Ingenieros Industriales, UNED, C/Juan del Rosal 12, 28040 Madrid (Spain); Conroy, Sean [VR Association, Uppsala University, Department of Physics and Astronomy, PO Box 516, SE-75120 Uppsala (Sweden); Snoj, Luka [Reactor Physics Department, Jožef Stefan Institute, Jamova cesta 39, SI-1000 Ljubljana (Slovenia)

2016-11-01

Highlights: • Results of three codes capable of simulating the accelerator based DT neutron generators were compared on a simple model where only a thin target made of mixture of titanium and tritium is present. Two typical deuteron beam energies, 100 keV and 250 keV, were used in the comparison. • Comparisons of the angular dependence of the total neutron flux and spectrum as well as the neutron spectrum of all the neutrons emitted from the target show general agreement of the results but also some noticeable differences. • A comparison of figures of merit of the calculations using different codes showed that the computational time necessary to achieve the same statistical uncertainty can vary for more than 30× when different codes for the simulation of the DT neutron generator are used. - Abstract: As the DT fusion reaction produces neutrons with energies significantly higher than in fission reactors, special fusion-relevant benchmark experiments are often performed using DT neutron generators. However, commonly used Monte Carlo particle transport codes such as MCNP or TRIPOLI cannot be directly used to analyze these experiments since they do not have the capabilities to model the production of DT neutrons. Three of the available approaches to model the DT neutron generator source are the MCUNED code, the ENEA-JSI DT source subroutine and the DDT code. The MCUNED code is an extension of the well-established and validated MCNPX Monte Carlo code. The ENEA-JSI source subroutine was originally prepared for the modelling of the FNG experiments using different versions of the MCNP code (−4, −5, −X) and was later extended to allow the modelling of both DT and DD neutron sources. The DDT code prepares the DT source definition file (SDEF card in MCNP) which can then be used in different versions of the MCNP code. In the paper the methods for the simulation of the DT neutron production used in the codes are briefly described and compared for the case of a

Wind-induced transmission tower foundation loads. A field study-design code comparison

Energy Technology Data Exchange (ETDEWEB)

Savory, E. [Department of Mechanical and Materials Engineering, University of Western Ontario, London, Ont. (Canada); Parke, G.A.R.; Disney, P.; Toy, N. [School of Engineering, University of Surrey, Guildford, Surrey GU2 7XH (United Kingdom)

2008-06-15

This paper presents a comparison between the wind-induced foundation loads measured on a type L6 transmission line tower during a field study in the UK and those computed using the UK Code of Practice for lattice tower and transmission line design (BS8100). In this work, the Code provisions have been generalised to give the wind-induced strain in each of the tower legs immediately above the foundation as a function of wind direction and wind speed at the top of the tower. The complete data set from the field monitoring has been decomposed to provide a similar formulation for comparison purposes. The analysis shows excellent agreement between the Code calculations and the measured results, within the overall accuracy of the field data. This indicates that, at least for the tower type examined here, the existing design Code provides a reliable transformation of the local wind speed at the top of the tower into tension and compression loads on the foundations. (author)

Pool swell sub-scale testing and code comparison

International Nuclear Information System (INIS)

Elisson, K.

1981-01-01

The main objective of the experiment was to investigate the pool swell dynamics in general and the forces on the lowered central part of the diaphragm between drywell and wetwell in particular. Apart from the high speed camera pressure transducers and strain gauges were used to monitor the transient. Data was recorded on a 14 channel FM recorder and then digitalised and plotted. In total more than one hundred tests were performed including parametric variations of for example geometry, break flow, initial drywell pressure and initial water level. In parallel to this experiment pool swell calculations have been performed with the computer codes COPTA and STEALTH. COPTA which is a lumped mass code for pressure suppression containment analysis has a slug pool swell mode. STEALTH which is a general purpose lagrangian hydrodynamics code has been used in a 2-D axisymmetric version. The STEALTH code has been used to calculate the radial variations in the vertical displacement and velocity of the pool surface and to predict the load on the lowered central part of the diaphragm. A comparison between the calculations and the experimental data indicates that both codes are sufficiently correct in their description of the pool swell transient. (orig.)

PIDIE, plutonium isotopic determination inter-comparison exercise

International Nuclear Information System (INIS)

Harry, R.J.S.

1990-07-01

PIDIE (Plutonium Isotopic Determination Inter-comparison Exercise) is one of the projects of the ESARDA Working Group on Techniques and Standards for Non-Destructive Analysis. PIDIE is placed against the historical background of the general development of international standards. Its results are also reviewed in the light of the original purpose of the project. Sets of seven sealed Pu samples of different isotopic composition, each containing 0,45 grammes, were sent to the 9 participating laboratories for three separate determinations of the unknown isotopic composition, to investigate error sources and , if possible to improve the knowledge of γ-emission probabilities. An additional question was to examine the possible improvement of such measurements using reference samples. No important bias has been observed in the results of this inter-comparison. The apparent improvement in the precision and accuracy of the result seems to arise from both better equipment and more elaborate spectrum evaluation methods. (author). 39 refs.; 1 fig.; 5 tabs

Comparison of design margin for core shroud in between design and construction code and fitness-for-service code

International Nuclear Information System (INIS)

Dozaki, Koji

2007-01-01

Structural design methods for core shroud of BWR are specified in JSME Design and Construction Code, like ASME Boiler and Pressure Vessel Code Sec. III, as a part of core support structure. Design margins are defined according to combination of the structural design method selected and service limit considered. Basically, those margins in JSME Code were determined after ASME Sec. III. Designers can select so-called twice-slope method for core shroud design among those design methods. On the other hand, flaw evaluation rules have been established for core shroud in JSME Fitness-for-Service Code. Twice-slope method is also adopted for fracture evaluation in that code even when the core shroud contains a flaw. Design margin was determined as structural factors separately from Design and Construction Code. As a natural consequence, there is a difference in those design margins between the two codes. In this paper, it is shown that the design margin in Fitness-for-Service Code is conservative by experimental evidences. Comparison of design margins between the two codes is discussed. (author)

Integral large scale experiments on hydrogen combustion for severe accident code validation-HYCOM

International Nuclear Information System (INIS)

Breitung, W.; Dorofeev, S.; Kotchourko, A.; Redlinger, R.; Scholtyssek, W.; Bentaib, A.; L'Heriteau, J.-P.; Pailhories, P.; Eyink, J.; Movahed, M.; Petzold, K.-G.; Heitsch, M.; Alekseev, V.; Denkevits, A.; Kuznetsov, M.; Efimenko, A.; Okun, M.V.; Huld, T.; Baraldi, D.

2005-01-01

A joint research project was carried out in the EU Fifth Framework Programme, concerning hydrogen risk in a nuclear power plant. The goals were: Firstly, to create a new data base of results on hydrogen combustion experiments in the slow to turbulent combustion regimes. Secondly, to validate the partners CFD and lumped parameter codes on the experimental data, and to evaluate suitable parameter sets for application calculations. Thirdly, to conduct a benchmark exercise by applying the codes to the full scale analysis of a postulated hydrogen combustion scenario in a light water reactor containment after a core melt accident. The paper describes the work programme of the project and the partners activities. Significant progress has been made in the experimental area, where test series in medium and large scale facilities have been carried out with the focus on specific effects of scale, multi-compartent geometry, heat losses and venting. The data were used for the validation of the partners CFD and lumped parameter codes, which included blind predictive calculations and pre- and post-test intercomparison exercises. Finally, a benchmark exercise was conducted by applying the codes to the full scale analysis of a hydrogen combustion scenario. The comparison and assessment of the results of the validation phase and of the challenging containment calculation exercise allows a deep insight in the quality, capabilities and limits of the CFD and the lumped parameter tools which are currently in use at various research laboratories

OBSTRUCTION OF THE EXERCISE OF ELECTORAL RIGHTS

Directory of Open Access Journals (Sweden)

MIRCEA CONSTANTIN SINESCU

2012-05-01

Full Text Available Throughout the present study, we analyze the crime of obstruction of the exercise of electoral rights, as it is presented in the New Criminal Code, in comparison with the current regulation within the specific election laws. Taking into consideration the fact that the election crimes have been inserted as a separate title (section in the New Criminal Code, we need to highlight the vision of the legislator regarding these crimes. Furthermore, this study consists of a synthetic analysis of the constitutive elements of the mentioned crime, as reconfigured in the form provided by art.385 of the New Criminal Code. We consider that examining this crime is a necessity, because of the lack of Court decisions in this area of practice - probably due to the gaps in the legislation preceding the Criminal Code that is to be enforced in the near future.

Comparison of profess predictions of D-COM blind problem with the experimental observations

International Nuclear Information System (INIS)

Sah, D.N.; Venkatesh, D.; Ram Adasan, E.

1984-01-01

As a part of an IAEA co-ordinated research program D-COM, a code exercise was organised in May 1983, to investigate the predictive capability of fuel performance codes with respect to transient fission gas release. In this exercise the computer code PROFESS was used to calculate the irradiation performance of fuel pins of the D-COM Blind problem circulated to the participants in the exercise. Calculations of fuel centre temperature, fuel-clad gap conductance, fission gas release during steady state and transient, and fuel restructurings for all the fuel pins were made by PROFESS. Comparison of predictions with experimental findings showed good agreement for several performance parameters. The comparison also revealed some areas where improvement was desired in the modelling of fuel behaviour. A recalculation was carried out for all fuel pins after incorporating modifications and adding additional models in the code. This allowed better agreement between the predicted and observed values of fission gas release in the fuel pins. This paper presents the results of blind calculation, recalculation and sensitivity analysis carried out by PROFESS on the D-COM Blind Problem. The paper also gives a brief description of the models of fission gas release and fuel restructuring used in the calculation. (author)

EG and G and NASA face seal codes comparison

Science.gov (United States)

Basu, Prit

1994-01-01

This viewgraph presentation presents the following results for the example comparison: EG&G code with face deformations suppressed and SPIRALG agree well with each other as well as with the experimental data; 0 rpm stiffness data calculated by EG&G code are about 70-100 percent lower than that by SPIRALG; there is no appreciable difference between 0 rpm and 16,000 rpm stiffness and damping coefficients calculated by SPIRALG; and the film damping above 500 psig calculated by SPIRALG is much higher than the O-Ring secondary seal damping (e.g. 50 lbf.s/in).

Contextual effects on the perceived health benefits of exercise: the exercise rank hypothesis.

Science.gov (United States)

Maltby, John; Wood, Alex M; Vlaev, Ivo; Taylor, Michael J; Brown, Gordon D A

2012-12-01

Many accounts of social influences on exercise participation describe how people compare their behaviors to those of others. We develop and test a novel hypothesis, the exercise rank hypothesis, of how this comparison can occur. The exercise rank hypothesis, derived from evolutionary theory and the decision by sampling model of judgment, suggests that individuals' perceptions of the health benefits of exercise are influenced by how individuals believe the amount of exercise ranks in comparison with other people's amounts of exercise. Study 1 demonstrated that individuals' perceptions of the health benefits of their own current exercise amounts were as predicted by the exercise rank hypothesis. Study 2 demonstrated that the perceptions of the health benefits of an amount of exercise can be manipulated by experimentally changing the ranked position of the amount within a comparison context. The discussion focuses on how social norm-based interventions could benefit from using rank information.

Psacoin level S intercomparison: An International code intercomparison exercise on a hypothetical safety assessment case study for radioactive waste disposal systems

International Nuclear Information System (INIS)

1993-06-01

This report documents the Level S exercise of the Probabilistic System Assessment Group (PSAG). Level S is the fifth in a series of Probabilistic Code Intercomparison (PSACOIN) exercises designed to contribute to the verification of probabilistic codes and methodologies that may be used in assessing the safety of radioactive waste disposal systems and concepts. The focus of the Level S exercise lies on sensitivity analysis. Given a common data set of model output and input values the participants were asked to identify both the underlying model's most important parameters (deterministic sensitivity analysis) and the link between the distributions of the input and output values (distribution sensitivity analysis). Agreement was generally found where it was expected and the exercise has achieved its objectives in acting as a focus for testing and discussing sensitivity analysis issues. Among the outstanding issues that have been identified are: (i) that techniques for distribution sensitivity analysis are needed that avoid the problem of statistical noise; (ii) that further investigations are warranted on the most appropriate way of handling large numbers of effectively zero results generated by Monte Carlo sampling; and (iii) that methods need to be developed for demonstrating that the results of sensitivity analysis are indeed correct

Comparisons of 'Identical' Simulations by the Eulerian Gyrokinetic Codes GS2 and GYRO

Science.gov (United States)

Bravenec, R. V.; Ross, D. W.; Candy, J.; Dorland, W.; McKee, G. R.

2003-10-01

A major goal of the fusion program is to be able to predict tokamak transport from first-principles theory. To this end, the Eulerian gyrokinetic code GS2 was developed years ago and continues to be improved [1]. Recently, the Eulerian code GYRO was developed [2]. These codes are not subject to the statistical noise inherent to particle-in-cell (PIC) codes, and have been very successful in treating electromagnetic fluctuations. GS2 is fully spectral in the radial coordinate while GYRO uses finite-differences and ``banded" spectral schemes. To gain confidence in nonlinear simulations of experiment with these codes, ``apples-to-apples" comparisons (identical profile inputs, flux-tube geometry, two species, etc.) are first performed. We report on a series of linear and nonlinear comparisons (with overall agreement) including kinetic electrons, collisions, and shaped flux surfaces. We also compare nonlinear simulations of a DIII-D discharge to measurements of not only the fluxes but also the turbulence parameters. [1] F. Jenko, et al., Phys. Plasmas 7, 1904 (2000) and refs. therein. [2] J. Candy, J. Comput. Phys. 186, 545 (2003).

Comparison of Two Commercial FE-Codes for Sheet Metal Forming

International Nuclear Information System (INIS)

Revuelta, A.; Larkiola, J.; Kanervo, K.; Korhonen, A. S.; Myllykoski, P.

2007-01-01

There is urgent need to develop new advanced fast and cost-effective mass-production methods for small sheet metal components. Traditionally progressive dies have been designed by using various CAD techniques. Recent results in mass production of small sheet metal parts using progressive dies and a transfer press showed that the tool design time may be cut in up to a half by using 3D finite element simulation of forming. In numerical simulation of sheet metal forming better constitutive models are required to obtain more accurate results, reduce the time for tool design and cut the production costs further. Accurate models are needed to describe the initial yielding, subsequent work hardening and to predict the formability. In this work two commercially available finite element simulation codes, PAM-STAMP and LS-DYNA, were compared in forming of small austenitic stainless steel sheet part for electronic industry. Several constitutive models were used in both codes and the results were compared. Comparisons were made between the same models in each of the codes and also between different models in the same code. Material models ranged from very simple to advanced ones, which took into account anisotropy and both isotropic and kinematic hardening behavior. In order to make a valid comparison we employed similar finite element meshes. The effects of the material models parameters were studied and the results were compared with experiments. The effects of the computational time were also studied

Uncertainty and sensitivity analysis using probabilistic system assessment code. 1

International Nuclear Information System (INIS)

Honma, Toshimitsu; Sasahara, Takashi.

1993-10-01

This report presents the results obtained when applying the probabilistic system assessment code under development to the PSACOIN Level 0 intercomparison exercise organized by the Probabilistic System Assessment Code User Group in the Nuclear Energy Agency (NEA) of OECD. This exercise is one of a series designed to compare and verify probabilistic codes in the performance assessment of geological radioactive waste disposal facilities. The computations were performed using the Monte Carlo sampling code PREP and post-processor code USAMO. The submodels in the waste disposal system were described and coded with the specification of the exercise. Besides the results required for the exercise, further additional uncertainty and sensitivity analyses were performed and the details of these are also included. (author)

Summary of aerosol code-comparison results for LWR aerosol containment tests LA1, LA2, and LA3

International Nuclear Information System (INIS)

Wright, A.L.; Wilson, J.H.; Arwood, P.C.

1987-01-01

The light-water reactor (LWR) aerosol containment experiments (LACE) are being performed in Richland, Washington, at the Hanford Engineering Development Laboratory under the leadership of an international project board and the Electric Power Research Institute. These tests have two objectives: (1) to investigate, at large scale, the inherent aerosol retention behavior in LWR containments under simulated severe accident conditions, and (2) to provide an experimental data base for validating aerosol behavior and thermal-hydraulic computer codes. Aerosol computer-code comparison activities for the LACE tests are being coordinated at the Oak Ridge National Laboratory. For each of the six experiments, pretest calculations (for code-to-code comparisons) and blind post-test calculations (for code-to-test data comparisons) are being performed. This paper presents a summary of the pretest aerosol-code results for tests LA1, LA2, and LA3

Performance Comparison of Containment PT analysis between CAP and CONTEMPT Code

Energy Technology Data Exchange (ETDEWEB)

Choo, Yeon Jun; Hong, Soon Joon; Hwang, Su Hyun; Kim, Min Ki; Lee, Byung Chul [FNC Tech., Seoul (Korea, Republic of); Ha, Sang Jun; Choi, Hoon [KHNP-CENTERAL RESEARCH INSTITUTE, Daejeon (Korea, Republic of)

2013-10-15

CAP, in the form that is linked with SPACE, computed the containment back-pressure during LOCA accident. In previous SAR (safety analysis report) report of Shin-Kori Units 3 and 4, the CONTEMPT series of codes(hereby referred to as just 'CONTEMPT') is used to evaluate the containment safety during the postulated loss-of-coolant accident (LOCA). In more detail, CONTEMPT-LT/028 was used to calculate the containment maximum PT, while CONTEMPT4/MOD5 to calculate the minimum PT. Actually, in minimum PT analysis, CONTEMPT4/MOD5, which provide back pressure condition of containment, was linked with RELAP5/MOD3.3 which calculate the amount of blowdown into containment. In this analysis, CONTEMPT4/MOD5 was modified based on KREM. CONTEMPT code was developed to predict the long term behavior of water-cooled nuclear reactor containment systems subjected to LOCA conditions. It calculates the time variation of compartment pressures, temperatures, mass and energy inventories, heat structure temperature distributions, and energy exchange with adjacent compartments, leakage on containment response. Models are provided for fan cooler and cooling spray as engineered safety systems. Any compartment may have both a liquid pool region and an air-vapor atmosphere region above the pool. Each region is assumed to have a uniform temperature, but the temperatures of the two regions may be different. As mentioned above, CONTEMP has the similar code features and it therefore is expected to show the similar analysis performance with CAP. In this study, the differences between CAP and two CONTEMPT code versions (CONTEMPT-LT/028 for maximum PT and CONTEMPT4/MOD5 for minimum PT) are, in detail, identified and the code performances were compared for the same problem. Code by code comparison was carried out to identify the difference of LOCA analysis between a series of COMTEMPT and CAP code. With regard to important factors that affect the transient behavior of compartment thermodynamic

Performance Comparison of Containment PT analysis between CAP and CONTEMPT Code

International Nuclear Information System (INIS)

Choo, Yeon Jun; Hong, Soon Joon; Hwang, Su Hyun; Kim, Min Ki; Lee, Byung Chul; Ha, Sang Jun; Choi, Hoon

2013-01-01

CAP, in the form that is linked with SPACE, computed the containment back-pressure during LOCA accident. In previous SAR (safety analysis report) report of Shin-Kori Units 3 and 4, the CONTEMPT series of codes(hereby referred to as just 'CONTEMPT') is used to evaluate the containment safety during the postulated loss-of-coolant accident (LOCA). In more detail, CONTEMPT-LT/028 was used to calculate the containment maximum PT, while CONTEMPT4/MOD5 to calculate the minimum PT. Actually, in minimum PT analysis, CONTEMPT4/MOD5, which provide back pressure condition of containment, was linked with RELAP5/MOD3.3 which calculate the amount of blowdown into containment. In this analysis, CONTEMPT4/MOD5 was modified based on KREM. CONTEMPT code was developed to predict the long term behavior of water-cooled nuclear reactor containment systems subjected to LOCA conditions. It calculates the time variation of compartment pressures, temperatures, mass and energy inventories, heat structure temperature distributions, and energy exchange with adjacent compartments, leakage on containment response. Models are provided for fan cooler and cooling spray as engineered safety systems. Any compartment may have both a liquid pool region and an air-vapor atmosphere region above the pool. Each region is assumed to have a uniform temperature, but the temperatures of the two regions may be different. As mentioned above, CONTEMP has the similar code features and it therefore is expected to show the similar analysis performance with CAP. In this study, the differences between CAP and two CONTEMPT code versions (CONTEMPT-LT/028 for maximum PT and CONTEMPT4/MOD5 for minimum PT) are, in detail, identified and the code performances were compared for the same problem. Code by code comparison was carried out to identify the difference of LOCA analysis between a series of COMTEMPT and CAP code. With regard to important factors that affect the transient behavior of compartment thermodynamic state in

Comparison of different LMFBR primary containment codes applied to a Benchmark problem

International Nuclear Information System (INIS)

Benuzzi, A.

1986-01-01

The Cont Benchmark calculation exercise is a project sponsored by the Containment Loading and Response Group, a subgroup of the Safety Working Group of the Fast Reactor Coordinating Committee - CEC. A full-size typical Pool type LMFBR undergoing a postulated Core Disruptive Accident (CDA) has been defined by Belgonucleaire-Brussels under a study contract financed by the CEC and has been submitted to seven containment code calculations. The results of these calculations are presented and discussed in this paper

Codification of LMFBR rules and comparison of codes

International Nuclear Information System (INIS)

Faure, O.; Debaene, J.P.

1993-01-01

The first part of this report presents the basic RCC-MR (regles de conception et de construction des materiels mecaniques des ilots nucleaires, reacteurs a neutrons rapides) design rules and their purpose. The second part is a qualitative comparison between RCC-MR, Code case N47 (ASME) and ETSDG Guide (MONJU Guide), made on the following topics: negligible creep test, ratcheting, creep fatigue, buckling, piping rules. An outline is given on improvements to RCC-MR rules now in progress

A comparison of the motivational factors between CrossFit participants and other resistance exercise modalities: a pilot study.

Science.gov (United States)

Fisher, James; Sales, Adele; Carlson, Luke; Steele, James

2017-09-01

Understanding resistance exercise motives and participation is essential in increasing exercise adherence and reducing comorbidities. CrossFit is a fitness movement that has seen an explosive growth in popularity worldwide; however, little research has investigated the motivational factors within this "niche" resistance exercise environment. The aim of this study was to explore the motivational factors of CrossFit participants in comparison to other resistance exercise participants. Using an independent-group design, quantitative data was collected using exercise motivations inventory-2 (EMI-2) questionnaire, for a total of 314 male and female participants (CrossFit: N.=68, group resistance exercise: N.=55, alone: N.=125, personal trainer: N.=66). The present study suggest that CrossFit participants were more likely to report higher levels of intrinsic motives, such as enjoyment, challenge and affiliation, whereas personal training clients reported higher values for health related motives such as positive health, ill-health avoidance and weight management. The findings suggest that the motivations for engaging in CrossFit may be similar to those seen in sport participation, and therefore may have an influence on facilitating long-term adherence in comparison with other resistance exercise modalities. This article also discusses health related motives as being extrinsic in nature but reflecting intrinsic characteristics, potentially also facilitating long term adherence. The present research helps develop further understanding of motivational variables within differing resistance exercise modalities.

The FRAM code: Description and some comparisons with MGA

International Nuclear Information System (INIS)

Sampson, T.E.; Kelley, T.A.

1994-01-01

The authors describe the initial development of the FRAM gamma-ray spectrometry code for analyzing plutonium isotopics, discuss its methodology, and present some comparisons with MGA on identical items. They also present some of the features of a new Windows 3.1-based version (PC/FRAM) and describe some current measurement problems. Development of the FRAM code began in about 1985, growing out of the need at the Los Alamos TA-55 Plutonium Facility for an isotopic analysis code to give accurate results for the effective specific power of heterogeneous (Am/Pu) pyrochemical residues. These residues present a difficult challenge because the americium is present mostly in a low-Z salt matrix (AmCl 3 ) with fines and small pieces of plutonium metal dispersed throughout the salt. Plutonium gamma rays suffer different attenuation than americium gamma rays of the same energy; this makes conventional analysis with a single relative efficiency function inaccurate for Am/Pu ratios and affects the analysis in other subtle ways

The Comparison of Traditional Exercises & Body Weight Supported Training (BWST Exercises on Sensory-Motor Function, Quality and Quantity of Walking in Paraplegic Spinal Cord Injured Persons

Directory of Open Access Journals (Sweden)

Mehdi Raeisi-dehkordi

2015-01-01

Full Text Available Objective: The aim of this study was the comparison of traditional exercises & body weight supported training (BWST exercises on sensory-motor function, quality and quantity of walking in paraplegic spinal cord injured persons. Materials & Methods: 17 voluntary paraplegic spinal cord injured persons (Asia B,C, age 32.53±1.793 years, height 175.71±1.658 cm, weight 71.59±2.442 kg, and body mass index (BMI 23.18 ± 0.828 kg/m2 availability. The subjects were randomly assigned to BWSTT group (N=10 and Traditional exercises group (N=7 according to sensory and motor score. The subjects trained for 12 weeks, four times per week and 60 min per session. BWSTT include 15 min warm-up on fixed gear bike, 45 min BWSTT with 50% body weight and 10 min cold-down finally. 10% load was added each week. Traditional exercises included 15 min warm-up plus 45 min stretch exercise and resistance training. Results: The data showed that there were significant differences in changes of sensory function Pin score (P=0.002 and Light Score (P=0.002 sensory function, motor function (P=0.000, Walking index Spinal cord injury (WISCI (P=0.002, 6 min walking test (P=0.001 and 10 meter walking (P=0.001 between BWSTT and traditional exercise. Conclusion: BWSTT in comparison with traditional exercise can improve sensory-motor function and quality and quantity of walking in paraplegic spinal cord injured persons.

A comparison of oxide thickness predictability from the perspective of codes

Energy Technology Data Exchange (ETDEWEB)

Park, Joo-Young; Shin, Hye-In; Kim, Kyung-Tae; Han, Hee-Tak; Kim, Hong-Jin; Kim, Yong-Hwan [KEPCO Nuclear Fuel Co. Ltd., Daejeon (Korea, Republic of)

2016-10-15

In Korea, OPR1000 and Westinghouse type nuclear power plant reactor fuel rods oxide thickness has been evaluated by imported code A. Because of this, there have been multiple constraints in operation and maintenance of fuel rod design system. For this reason, there has been a growing demand to establish an independent fuel rod design system. To meet this goal, KNF has recently developed its own code B for fuel rod design. The objective of this study is to compare oxide thickness prediction performance between code A and code B and to check the validity of predicting corrosion behaviors of newly developed code B. This study is based on Pool Side Examination (PSE) data for the performance confirmation. For the examination procedures, the oxide thickness measurement methods and equipment of PSE are described in detail. In this study, code B is confirmed conservatism and validity on evaluating cladding oxide thickness through the comparison with code A. Code prediction values show higher value than measured data from PSE. Throughout this study, the values by code B are evaluated and proved to be valid in a view point of the oxide thickness evaluation. However, the code B input for prediction has been made by designer's judgment with complex handwork that might be lead to excessive conservative result and ineffective design process with some possibility of errors.

Comparisons of coded aperture imaging using various apertures and decoding methods

International Nuclear Information System (INIS)

Chang, L.T.; Macdonald, B.; Perez-Mendez, V.

1976-07-01

The utility of coded aperture γ camera imaging of radioisotope distributions in Nuclear Medicine is in its ability to give depth information about a three dimensional source. We have calculated imaging with Fresnel zone plate and multiple pinhole apertures to produce coded shadows and reconstruction of these shadows using correlation, Fresnel diffraction, and Fourier transform deconvolution. Comparisons of the coded apertures and decoding methods are made by evaluating their point response functions both for in-focus and out-of-focus image planes. Background averages and standard deviations were calculated. In some cases, background subtraction was made using combinations of two complementary apertures. Results using deconvolution reconstruction for finite numbers of events are also given

Validation of a new continuous Monte Carlo burnup code using a Mox fuel assembly

International Nuclear Information System (INIS)

El bakkari, B.; El Bardouni, T.; Merroun, O.; El Younoussi, C.; Boulaich, Y.; Boukhal, H.; Chakir, E.

2009-01-01

The reactivity of nuclear fuel decreases with irradiation (or burnup) due to the transformation of heavy nuclides and the formation of fission products. Burnup credit studies aim at accounting for fuel irradiation in criticality studies of the nuclear fuel cycle (transport, storage, etc...). The principal objective of this study is to evaluate the potential capabilities of a newly developed burnup code called 'BUCAL1'. BUCAL1 differs in comparison with other burnup codes as it does not use the calculated neutron flux as input to other computer codes to generate the nuclide inventory for the next time step. Instead, BUCAL1 directly uses the neutron reaction tally information generated by MCNP for each nuclide of interest to determine the new nuclides inventory. This allows the full capabilities of MCNP to be incorporated into the calculation and a more accurate and robust analysis to be performed. Validation of BUCAL1 was processed by code-to-code comparisons using predictions of several codes from the NEA/OCED. Infinite multiplication factors (k ∞ ) and important fission product and actinide concentrations were compared for a MOX core benchmark exercise. Results of calculations are analysed and discussed.

Second ATLAS Domestic Standard Problem (DSP-02) For A Code Assessment

International Nuclear Information System (INIS)

Kim, Yeonsik; Choi, Kiyong; Cho, Seok; Park, Hyunsik; Kang, Kyungho; Song, Chulhwa; Baek, Wonpil

2013-01-01

KAERI (Korea Atomic Energy Research Institute) has been operating an integral effect test facility, the Advanced Thermal-Hydraulic Test Loop for Accident Simulation (ATLAS), for transient and accident simulations of advanced pressurized water reactors (PWRs). Using ATLAS, a high-quality integral effect test database has been established for major design basis accidents of the APR1400 plant. A Domestic Standard Problem (DSP) exercise using the ATLAS database was promoted to transfer the database to domestic nuclear industries and contribute to improving a safety analysis methodology for PWRs. This 2 nd ATLAS DSP (DSP-02) exercise aims at an effective utilization of an integral effect database obtained from ATLAS, the establishment of a cooperation framework among the domestic nuclear industry, a better understanding of the thermal hydraulic phenomena, and an investigation into the possible limitation of the existing best-estimate safety analysis codes. A small break loss of coolant accident with a 6-inch break at the cold leg was determined as a target scenario by considering its technical importance and by incorporating interests from participants. This DSP exercise was performed in an open calculation environment where the integral effect test data was open to participants prior to the code calculations. This paper includes major information of the DSP-02 exercise as well as comparison results between the calculations and the experimental data

SECOND ATLAS DOMESTIC STANDARD PROBLEM (DSP-02 FOR A CODE ASSESSMENT

Directory of Open Access Journals (Sweden)

YEON-SIK KIM

2013-12-01

Full Text Available KAERI (Korea Atomic Energy Research Institute has been operating an integral effect test facility, the Advanced Thermal-Hydraulic Test Loop for Accident Simulation (ATLAS, for transient and accident simulations of advanced pressurized water reactors (PWRs. Using ATLAS, a high-quality integral effect test database has been established for major design basis accidents of the APR1400 plant. A Domestic Standard Problem (DSP exercise using the ATLAS database was promoted to transfer the database to domestic nuclear industries and contribute to improving a safety analysis methodology for PWRs. This 2nd ATLAS DSP (DSP-02 exercise aims at an effective utilization of an integral effect database obtained from ATLAS, the establishment of a cooperation framework among the domestic nuclear industry, a better understanding of the thermal hydraulic phenomena, and an investigation into the possible limitation of the existing best-estimate safety analysis codes. A small break loss of coolant accident with a 6-inch break at the cold leg was determined as a target scenario by considering its technical importance and by incorporating interests from participants. This DSP exercise was performed in an open calculation environment where the integral effect test data was open to participants prior to the code calculations. This paper includes major information of the DSP-02 exercise as well as comparison results between the calculations and the experimental data.

OECD International Standard Problem number 34. Falcon code comparison report

International Nuclear Information System (INIS)

Williams, D.A.

1994-12-01

ISP-34 is the first ISP to address fission product transport issues and has been strongly supported by a large number of different countries and organisations. The ISP is based on two experiments, FAL-ISP-1 and FAL-ISP-2, which were conducted in AEA's Falcon facility. Specific features of the experiments include quantification of chemical effects and aerosol behaviour. In particular, multi-component aerosol effects and vapour-aerosol interactions can all be investigated in the Falcon facility. Important parameters for participants to predict were the deposition profiles and composition, key chemical species and reactions, evolution of suspended material concentrations, and the effects of steam condensation onto aerosols and particle hygroscopicity. The results of the Falcon ISP support the belief that aerosol physics is generally well modelled in primary circuit codes, but the chemistry models in many of the codes need to be improved, since chemical speciation is one of the main factors which controls transport and deposition behaviour. The importance of chemical speciation, aerosol nucleation, and the role of multi-component aerosols in determining transport and deposition behaviour are evident. The role of re-vaporization in these Falcon experiments is not clear; it is not possible to compare those codes which predicted re-vaporization with quantitative data. The evidence from this ISP exercise indicates that the containment codes can predict thermal-hydraulics conditions satisfactorily. However, the differences in the predicted aerosol locations in the Falcon tests had shown that aerosol behaviour was very susceptible to parameters such as particle size distribution

Comparison of accelerator codes for a RHIC [Relativistic Heavy Ion Collider] lattice

International Nuclear Information System (INIS)

Milutinovic, J.; Ruggiero, A.G.

1989-01-01

We present the results of comparison of performances of several tracking or/and analysis codes. The basic purpose of this program was to assess reliability and accuracy of these codes, i.e., to determine the so-called ''error bars'' for the predicted values of tunes and other lattice functions as a minimum and, if possible, to discover potential difficulties with underlying physical models in these codes, inadequate algorithms, residual bugs and the like. Not only have we been able to determine the error bars, which for instance for the tunes at dp/p = +1% are Δν/sub ξ/ = 0.0027, Δν/sub y/ = 0.0010, but also our program has brought about improvements of several codes. 8 refs., 3 figs., 2 tabs

Computerized Dental Comparison: A Critical Review of Dental Coding and Ranking Algorithms Used in Victim Identification.

Science.gov (United States)

Adams, Bradley J; Aschheim, Kenneth W

2016-01-01

Comparison of antemortem and postmortem dental records is a leading method of victim identification, especially for incidents involving a large number of decedents. This process may be expedited with computer software that provides a ranked list of best possible matches. This study provides a comparison of the most commonly used conventional coding and sorting algorithms used in the United States (WinID3) with a simplified coding format that utilizes an optimized sorting algorithm. The simplified system consists of seven basic codes and utilizes an optimized algorithm based largely on the percentage of matches. To perform this research, a large reference database of approximately 50,000 antemortem and postmortem records was created. For most disaster scenarios, the proposed simplified codes, paired with the optimized algorithm, performed better than WinID3 which uses more complex codes. The detailed coding system does show better performance with extremely large numbers of records and/or significant body fragmentation. © 2015 American Academy of Forensic Sciences.

Automated Testing Infrastructure and Result Comparison for Geodynamics Codes

Science.gov (United States)

Heien, E. M.; Kellogg, L. H.

2013-12-01

The geodynamics community uses a wide variety of codes on a wide variety of both software and hardware platforms to simulate geophysical phenomenon. These codes are generally variants of finite difference or finite element calculations involving Stokes flow or wave propagation. A significant problem is that codes of even low complexity will return different results depending on the platform due to slight differences in hardware, software, compiler, and libraries. Furthermore, changes to the codes during development may affect solutions in unexpected ways such that previously validated results are altered. The Computational Infrastructure for Geodynamics (CIG) is funded by the NSF to enhance the capabilities of the geodynamics community through software development. CIG has recently done extensive work in setting up an automated testing and result validation system based on the BaTLab system developed at the University of Wisconsin, Madison. This system uses 16 variants of Linux and Mac platforms on both 32 and 64-bit processors to test several CIG codes, and has also recently been extended to support testing on the XSEDE TACC (Texas Advanced Computing Center) Stampede cluster. In this work we overview the system design and demonstrate how automated testing and validation occurs and results are reported. We also examine several results from the system from different codes and discuss how changes in compilers and libraries affect the results. Finally we detail some result comparison tools for different types of output (scalar fields, velocity fields, seismogram data), and discuss within what margins different results can be considered equivalent.

AMENDMENTS TO THE FISCAL CODE REGARDING THE EXPENDITURES AND THE DETERMINATION OF THE EXERCISE RESULT

Directory of Open Access Journals (Sweden)

HOLT GHEORGHE

2017-02-01

Full Text Available rct Fiscal Code has brought many changes in the structure of the expenses used to calculate the results of the exercise and, thus, the profits tax. It treats the three items of expense categories (deductibles, with limited deductibility and non-deductible, bringing numerous changes in the structure of each of them. Expenses is recorded as decreases in economic benefits during the accounting period as outflows or decreases in assets and increases in the value of debt, which is reflected in the reductions of equity, other than those arising from their distribution to shareholders. The Fiscal Code has brought many changes to tax legislation in Romania, all the titles being affected, a particular importance being awarded to the changes regarding to the expenses deductibility, items that are the subject of this material. The basic concept regarding the deduction of expenses has been reformulated in the Fiscal Code, so that - currently - are deductible expenses that are performed for business purposes, unlike the general rule of deductibility valid until 31 December 2015, that were deductible only those expenses incurred in order to achieve taxable income.

Multi-dimensional free-electron laser simulation codes: a comparison study

CERN Document Server

Biedron, S G; Dejus, Roger J; Faatz, B; Freund, H P; Milton, S V; Nuhn, H D; Reiche, S

2000-01-01

A self-amplified spontaneous emission (SASE) free-electron laser (FEL) is under construction at the Advanced Photon Source (APS). Five FEL simulation codes were used in the design phase: GENESIS, GINGER, MEDUSA, RON, and TDA3D. Initial comparisons between each of these independent formulations show good agreement for the parameters of the APS SASE FEL.

Multi-dimensional free-electron laser simulation codes: a comparison study

International Nuclear Information System (INIS)

Biedron, S. G.; Chae, Y. C.; Dejus, R. J.; Faatz, B.; Freund, H. P.; Milton, S. V.; Nuhn, H.-D.; Reiche, S.

1999-01-01

A self-amplified spontaneous emission (SASE) free-electron laser (FEL) is under construction at the Advanced Photon Source (APS). Five FEL simulation codes were used in the design phase: GENESIS, GINGER, MEDUSA, RON, and TDA3D. Initial comparisons between each of these independent formulations show good agreement for the parameters of the APS SASE FEL

Intercomparison and validation of computer codes for thermalhydraulic safety analysis of heavy water reactors

International Nuclear Information System (INIS)

2004-08-01

Activities within the frame of the IAEA's Technical Working Group on Advanced Technologies for HWRs (TWG-HWR) are conducted in a project within the IAEA's subprogramme on nuclear power reactor technology development. The objective of the activities on HWRs is to foster, within the frame of the TWG-HWR, information exchange and co-operative research on technology development for current and future HWRs, with an emphasis on safety, economics and fuel resource sustainability. One of the activities recommended by the TWG-HWR was an international standard problem exercise entitled: Intercomparison and validation of computer codes for thermalhydraulics safety analyses. Intercomparison and validation of computer codes used in different countries for thermalhydraulics safety analyses will enhance the confidence in the predictions made by these codes. However, the intercomparison and validation exercise needs a set of reliable experimental data. The RD-14M Large-Loss Of Coolant Accident (LOCA) test B9401 simulating HWR LOCA behaviour that was conducted by Atomic Energy of Canada Ltd (AECL) was selected for this validation project. This report provides a comparison of the results obtained from six participating countries, utilizing four different computer codes. General conclusions are reached and recommendations made

Comparison of joint kinetics during free weight and flywheel resistance exercise.

Science.gov (United States)

Chiu, Loren Z F; Salem, George J

2006-08-01

The most common modality for resistance exercise is free weight resistance. Alternative methods of providing external resistance have been investigated, in particular for use in microgravity environments such as space flight. One alternative modality is flywheel inertial resistance, which generates resistance as a function of the mass, distribution of mass, and angular acceleration of the flywheel. The purpose of this investigation was to characterize net joint kinetics of multijoint exercises performed with a flywheel inertial resistance device in comparison to free weights. Eleven trained men and women performed the front squat, lunge, and push press on separate days with free weight or flywheel resistance, while instrumented for biomechanical analysis. Front squats performed with flywheel resistance required greater contribution of the hip and ankle, and less contribution of the knee, compared to free weight. Push presses performed with flywheel resistance had similar impulse requirements at the knee compared to free weight, but greater impulse requirement at the hip and ankle. As used in this investigation, flywheel inertial resistance increases the demand on the hip extensors and ankle plantarflexors and decreases the mechanical demand on the knee extensors for lower extremity exercises such as the front squat and lunge. Exercises involving dynamic lower and upper extremity actions, such as the push press, may benefit from flywheel inertial resistance, due to the increased mechanical demand on the knee extensors.

Final report on the REAL-84 exercise

International Nuclear Information System (INIS)

Zijp, W.L.; Nolthenius, H.J.

1988-11-01

The main aim of the REAL-84 exercise, organized by the International Atomic Energy Agency in Vienna, was to improve the assessment of accuracies in radiation damage predictions by various laboratories using good quality input data and proper calculation methods. The emphasis was concentrated on radiation damage characterization to reactor pressure vessels and related neutron technology. The long term aim of this exercise was to strive towards the establishment of standardized metrology procedures and recommended nuclear data for use in spectrum adjustment and damage parameter calculations. In this calculation exercise dealing with seven different neutron spectra the best available input data were used. Also some utility programs were included to facilitate the preparation of input data for the adjustment codes. This final report presents a discussion on the 44 sets of adjustment results received from 12 laboratories. The comparison of the results of the various spectra showed in most cases a relatively large and unexpected interlaboratory spread. Attention is given to this phenomenon. Also the quality of the input data set and a characterization of covariance matrices is summarized

Comparison of the PHISICS/RELAP5-3D Ring and Block Model Results for Phase I of the OECD MHTGR-350 Benchmark

Energy Technology Data Exchange (ETDEWEB)

Gerhard Strydom

2014-04-01

The INL PHISICS code system consists of three modules providing improved core simulation capability: INSTANT (performing 3D nodal transport core calculations), MRTAU (depletion and decay heat generation) and a perturbation/mixer module. Coupling of the PHISICS code suite to the thermal hydraulics system code RELAP5-3D has recently been finalized, and as part of the code verification and validation program the exercises defined for Phase I of the OECD/NEA MHTGR 350 MW Benchmark were completed. This paper provides an overview of the MHTGR Benchmark, and presents selected results of the three steady state exercises 1-3 defined for Phase I. For Exercise 1, a stand-alone steady-state neutronics solution for an End of Equilibrium Cycle Modular High Temperature Reactor (MHTGR) was calculated with INSTANT, using the provided geometry, material descriptions, and detailed cross-section libraries. Exercise 2 required the modeling of a stand-alone thermal fluids solution. The RELAP5-3D results of four sub-cases are discussed, consisting of various combinations of coolant bypass flows and material thermophysical properties. Exercise 3 combined the first two exercises in a coupled neutronics and thermal fluids solution, and the coupled code suite PHISICS/RELAP5-3D was used to calculate the results of two sub-cases. The main focus of the paper is a comparison of the traditional RELAP5-3D “ring” model approach vs. a much more detailed model that include kinetics feedback on individual block level and thermal feedbacks on a triangular sub-mesh. The higher fidelity of the block model is illustrated with comparison results on the temperature, power density and flux distributions, and the typical under-predictions produced by the ring model approach are highlighted.

A comparison of two three-dimensional shell-element transient electromagnetics codes

International Nuclear Information System (INIS)

Yugo, J.J.; Williamson, D.E.

1992-01-01

Electromagnetic forces due to eddy currents strongly influence the design of components for the next generation of fusion devices. An effort has been made to benchmark two computer programs used to generate transient electromagnetic loads: SPARK and EddyCuFF. Two simple transient field problems were analyzed, both of which had been previously analyzed by the SPARK code with results recorded in the literature. A third problem that uses an ITER inboard blanket benchmark model was analyzed as well. This problem was driven with a self-consistent, distributed multifilament plasma model generated by an axisymmetric physics code. The benchmark problems showed good agreement between the two shell-element codes. Variations in calculated eddy currents of 1--3% have been found for similar, finely meshed models. A difference of 8% was found in induced current and 20% in force for a coarse mesh and complex, multifilament field driver. Because comparisons were made to results obtained from literature, model preparation and code execution times were not evaluated

Simulations with the DIONISIO 1.0 Code of Experiments Proposed for the Fumex III Exercise. Final Report

International Nuclear Information System (INIS)

Soba, Alejandro; Denis, Alicia

2013-01-01

This presentation is intended to summarize the results obtained with DIONISIO within the frame of the FUMEX III exercise. From that list we selected those cases that fall within the scope of our code and excluded examples oriented to loss of coolant accidents, like FIO 131, Mt4 and Mt6, or to reactivity initiated accidents, like NSRR, or to oxidation and creep behavior of the cladding under variable stress conditions, like E110 or IFA 585. The models contained in DIONISIO permit the prediction of the temperature distribution in the pellet, cladding and gap, the elastic and plastic stress and strain, creep, swelling and densification, release of fission gases, cesium and iodine to the internal free volume of the rod, gas mixing, pressure increase, irradiation growth of the Zircaloy cladding, development of an oxide layer and hydrogen uptake on the waterside surface, restructuring and grain growth in the pellet. The effects of an internal or external corrosive atmosphere (SCC) as well as the possibility of pellet-cladding interaction (PCI) and crack propagation are also considered. Among the several models included in the code, we consider that two merit some more attention: the thermal description of the gap, since it is determinant of the quality of the simulation of pellet-cladding interaction, and the model of mechanical contact between them designed to predict the failure conditions of the cladding. A summary of both is given below. The participation of our code in the FUMEX III exercise prompted the development of the tools necessary to simulate the fuel behavior in the high burnup range. On the one hand, a subroutine was included in DIONISIO designed to give the radial distribution of the Pu and U isotopes that play a role in the absorption and capture of neutrons in the fuel. As a result, the local distribution of burnup can be obtained with the code. On that basis, the dependence of the thermal conductivity with burnup was included. The code is two

PHISICS/RELAP5-3D RESULTS FOR EXERCISES II-1 AND II-2 OF THE OECD/NEA MHTGR-350 BENCHMARK

Energy Technology Data Exchange (ETDEWEB)

Strydom, Gerhard [Idaho National Laboratory

2016-03-01

The Idaho National Laboratory (INL) Advanced Reactor Technologies (ART) High-Temperature Gas-Cooled Reactor (HTGR) Methods group currently leads the Modular High-Temperature Gas-Cooled Reactor (MHTGR) 350 benchmark. The benchmark consists of a set of lattice-depletion, steady-state, and transient problems that can be used by HTGR simulation groups to assess the performance of their code suites. The paper summarizes the results obtained for the first two transient exercises defined for Phase II of the benchmark. The Parallel and Highly Innovative Simulation for INL Code System (PHISICS), coupled with the INL system code RELAP5-3D, was used to generate the results for the Depressurized Conduction Cooldown (DCC) (exercise II-1a) and Pressurized Conduction Cooldown (PCC) (exercise II-2) transients. These exercises require the time-dependent simulation of coupled neutronics and thermal-hydraulics phenomena, and utilize the steady-state solution previously obtained for exercise I-3 of Phase I. This paper also includes a comparison of the benchmark results obtained with a traditional system code “ring” model against a more detailed “block” model that include kinetics feedback on an individual block level and thermal feedbacks on a triangular sub-mesh. The higher spatial fidelity that can be obtained by the block model is illustrated with comparisons of the maximum fuel temperatures, especially in the case of natural convection conditions that dominate the DCC and PCC events. Differences up to 125 K (or 10%) were observed between the ring and block model predictions of the DCC transient, mostly due to the block model’s capability of tracking individual block decay powers and more detailed helium flow distributions. In general, the block model only required DCC and PCC calculation times twice as long as the ring models, and it therefore seems that the additional development and calculation time required for the block model could be worth the gain that can be

Comparison of secondary flows predicted by a viscous code and an inviscid code with experimental data for a turning duct

Science.gov (United States)

Schwab, J. R.; Povinelli, L. A.

1984-01-01

A comparison of the secondary flows computed by the viscous Kreskovsky-Briley-McDonald code and the inviscid Denton code with benchmark experimental data for turning duct is presented. The viscous code is a fully parabolized space-marching Navier-Stokes solver while the inviscid code is a time-marching Euler solver. The experimental data were collected by Taylor, Whitelaw, and Yianneskis with a laser Doppler velocimeter system in a 90 deg turning duct of square cross-section. The agreement between the viscous and inviscid computations was generally very good for the streamwise primary velocity and the radial secondary velocity, except at the walls, where slip conditions were specified for the inviscid code. The agreement between both the computations and the experimental data was not as close, especially at the 60.0 deg and 77.5 deg angular positions within the duct. This disagreement was attributed to incomplete modelling of the vortex development near the suction surface.

Comparison of Zgoubi and S-Code regarding the FFAG muon acceleration

International Nuclear Information System (INIS)

Fourrier, J.; Machida, S.

2006-06-01

The high flux accelerator based neutrino source is foreseen as one of the next generation facilities of particle physics. Called Neutrino Factory (NuFact), it will be based on a muon storage ring where muons will decay, creating high flux neutrino beams. Muons are supposed to be accelerated from 5 to 20 GeV before being injected into the storage ring. In that purpose, Fixed Field Alternating Gradient accelerators (FFAG) are one of the possibilities. Cell designs have been done and tracking studies are on their way using codes such as MAD, S-Code or Zgoubi. In order to cross-check results so obtained, we have performed comparisons between S-Code and Zgoubi at Rutherford Appleton Laboratory. The present report will explain the different simulations done and the results. The paper has the following contents: 1. Introduction; 2. Time of Flight comparisons; 3. Particle acceleration with different emittances; 4. Bunch acceleration. In conclusion it is shown that the difference of time of flight between the particle 1 and the others is comparable from Zgoubi to S- Code. Nevertheless, further investigation is necessary to make sure that the same revolution time will be found with the same initial conditions. Concerning the acceleration it was found that that the larger the emittance the less efficient appears to be the acceleration. Particles on ellipses 10 to 40 π mm rad are accelerated beyond 9 GeV while particles on ellipse 50 π mm rad are only accelerated up to 7.5 GeV and those on 60 π mm rad ellipse just reach 6 GeV. Thus, a beam whom emittance would be larger than 30 π mm rad would not be accelerated enough to reach 10 GeV and to be injected into the second FFAG. In the same way as for the first FFAG the larger the emittance the less efficient the acceleration. Particles on ellipses 10 to 40 π mm rad are accelerated beyond 18 GeV while particles on ellipses 50 and 60 π mm rad are only accelerated up to 12 GeV. Thus, beams whom emittance is lower than 30 π mm

Comparison of TITAN hybrid deterministic transport code and MCNP5 for simulation of SPECT

International Nuclear Information System (INIS)

Royston, K.; Haghighat, A.; Yi, C.

2010-01-01

Traditionally, Single Photon Emission Computed Tomography (SPECT) simulations use Monte Carlo methods. The hybrid deterministic transport code TITAN has recently been applied to the simulation of a SPECT myocardial perfusion study. The TITAN SPECT simulation uses the discrete ordinates formulation in the phantom region and a simplified ray-tracing formulation outside of the phantom. A SPECT model has been created in the Monte Carlo Neutral particle (MCNP)5 Monte Carlo code for comparison. In MCNP5 the collimator is directly modeled, but TITAN instead simulates the effect of collimator blur using a circular ordinate splitting technique. Projection images created using the TITAN code are compared to results using MCNP5 for three collimator acceptance angles. Normalized projection images for 2.97 deg, 1.42 deg and 0.98 deg collimator acceptance angles had maximum relative differences of 21.3%, 11.9% and 8.3%, respectively. Visually the images are in good agreement. Profiles through the projection images were plotted to find that the TITAN results followed the shape of the MCNP5 results with some differences in magnitude. A timing comparison on 16 processors found that the TITAN code completed the calculation 382 to 2787 times faster than MCNP5. Both codes exhibit good parallel performance. (author)

Exercise for Weight Loss: Calories Burned in One Hour

Science.gov (United States)

... second update of codes and MET values. Medicine & Science in Sports & Exercise. 2011;43:1575. 2008 Physical Activity Guidelines ... second update of codes and MET values. Medicine & Science in Sports & Exercise. 2011;43:1575. Losing weight. Centers for ...

Impact of dynamic rate coding aspects of mobile phone networks on forensic voice comparison.

Science.gov (United States)

Alzqhoul, Esam A S; Nair, Balamurali B T; Guillemin, Bernard J

2015-09-01

Previous studies have shown that landline and mobile phone networks are different in their ways of handling the speech signal, and therefore in their impact on it. But the same is also true of the different networks within the mobile phone arena. There are two major mobile phone technologies currently in use today, namely the global system for mobile communications (GSM) and code division multiple access (CDMA) and these are fundamentally different in their design. For example, the quality of the coded speech in the GSM network is a function of channel quality, whereas in the CDMA network it is determined by channel capacity (i.e., the number of users sharing a cell site). This paper examines the impact on the speech signal of a key feature of these networks, namely dynamic rate coding, and its subsequent impact on the task of likelihood-ratio-based forensic voice comparison (FVC). Surprisingly, both FVC accuracy and precision are found to be better for both GSM- and CDMA-coded speech than for uncoded. Intuitively one expects FVC accuracy to increase with increasing coded speech quality. This trend is shown to occur for the CDMA network, but, surprisingly, not for the GSM network. Further, in respect to comparisons between these two networks, FVC accuracy for CDMA-coded speech is shown to be slightly better than for GSM-coded speech, particularly when the coded-speech quality is high, but in terms of FVC precision the two networks are shown to be very similar. Copyright © 2015 The Chartered Society of Forensic Sciences. Published by Elsevier Ireland Ltd. All rights reserved.

Dynamic models for radionuclide transport in agricultural ecosystems: summary of results from a UK code comparison exercise

International Nuclear Information System (INIS)

Meekings, G.F.; Walters, B.

1986-01-01

In recent years, models have been developed by three organisations in the UK to represent the time-dependent behaviour of radionuclides in agricultural ecosystems. These models were developed largely independently of each other and, in view of their potential applications in relation to radioactive waste management and discharge, the Food Science Division of the Ministry of Agriculture, Fisheries and Food initiated a calculational intercomparison exercise with the agreement and cooperation of all three organisations involved. A subset of the results obtained is reported here. In general a high degree of consistency between the results of the various models was obtained particularly regarding the responses with time. The exercise supported the case for using dynamic models in radiological assessment studies. It also demonstrated areas where differences in results from the models are a consequence of a lack of appropriate data on the environmental behaviour of the radionuclides considered. (author)

Combinatorial neural codes from a mathematical coding theory perspective.

Science.gov (United States)

Curto, Carina; Itskov, Vladimir; Morrison, Katherine; Roth, Zachary; Walker, Judy L

2013-07-01

Shannon's seminal 1948 work gave rise to two distinct areas of research: information theory and mathematical coding theory. While information theory has had a strong influence on theoretical neuroscience, ideas from mathematical coding theory have received considerably less attention. Here we take a new look at combinatorial neural codes from a mathematical coding theory perspective, examining the error correction capabilities of familiar receptive field codes (RF codes). We find, perhaps surprisingly, that the high levels of redundancy present in these codes do not support accurate error correction, although the error-correcting performance of receptive field codes catches up to that of random comparison codes when a small tolerance to error is introduced. However, receptive field codes are good at reflecting distances between represented stimuli, while the random comparison codes are not. We suggest that a compromise in error-correcting capability may be a necessary price to pay for a neural code whose structure serves not only error correction, but must also reflect relationships between stimuli.

Comparison of the calculations of the stability properties of a specific stellarator equilibrium with different MHD stability codes

International Nuclear Information System (INIS)

Nakamura, Y.; Matsumoto, T.; Wakatani, M.; Ichiguchi, K.; Garcia, L.; Carreras, B.A.

1995-04-01

A particular configuration of the LHD stellarator with an unusually flat pressure profile has been chosen to be a test case for comparison of the MHD stability property predictions of different three-dimensional and averaged codes for the purpose of code comparison and validation. In particular, two relatively localized instabilities, the fastest growing modes with toroidal mode number n = 2 and n = 3 were studied using several different codes, with the good agreement that has been found providing justification for the use of any of them for equilibria of the type considered

Code-code comparisons of DIVIMP's 'onion-skin model' and the EDGE2D fluid code

International Nuclear Information System (INIS)

Stangeby, P.C.; Elder, J.D.; Horton, L.D.; Simonini, R.; Taroni, A.; Matthews, O.F.; Monk, R.D.

1997-01-01

In onion-skin modelling, O-SM, of the edge plasma, the cross-field power and particle flows are treated very simply e.g. as spatially uniform. The validity of O-S modelling requires demonstration that such approximations can still result in reasonable solutions for the edge plasma. This is demonstrated here by comparison of O-SM with full 2D fluid edge solutions generated by the EDGE2D code. The target boundary conditions for the O-SM are taken from the EDGE2D output and the complete O-SM solutions are then compared with the EDGE2D ones. Agreement is generally within 20% for n e , T e , T i and parallel particle flux density Γ for the medium and high recycling JET cases examined and somewhat less good for a strongly detached CMOD example. (orig.)

Comparison of SISEC code simulations with earthquake data of ordinary and base-isolated buildings

International Nuclear Information System (INIS)

Wang, C.Y.; Gvildys, J.

1991-01-01

At Argonne National Laboratory (ANL), a 3-D computer program SISEC (Seismic Isolation System Evaluation Code) is being developed for simulating the system response of isolated and ordinary structures (Wang et al. 1991). This paper describes comparison of SISEC code simulations with building response data of actual earthquakes. To ensure the accuracy of analytical simulations, recorded data of full-size reinforced concrete structures located in Sendai, Japan are used in this benchmark comparison. The test structures consist of two three-story buildings, one base-isolated and the other one ordinary founded. They were constructed side by side to investigate the effect of base isolation on the acceleration response. Among 20 earthquakes observed since April 1989, complete records of three representative earthquakes, no.2, no.6, and no.17, are used for the code validation presented in this paper. Correlations of observed and calculated accelerations at all instrument locations are made. Also, relative response characteristics of ordinary and isolated building structures are investigated. (J.P.N.)

Interlaboratory comparison exercise for the determination of uranium by potentiometric titration (first phase)

International Nuclear Information System (INIS)

Verdingh, V.; Le Duigou, Y.

1991-01-01

Upon request of the Esarda working group on low-enriched uranium conversion and fuel fabrication plants an interlaboratory comparison was organized, to assess the precision and accuracy concerning the determination of uranium by the potentiometric titration method. This report presents the results of the first phase of this exercise (pure uranyl-nitrate solutions). The solutions used in this intercomparison have been certified for their uranium content by the CBNM, Geel. Comparison of the laboratory results with the certified values shows excellent, good and fairly good agreement for many of the participating laboratories. 10 tabs., 5 figs., 10 refs

Comparison of the effects of virtual reality-based balance exercises and conventional exercises on balance and fall risk in older adults living in nursing homes in Turkey.

Science.gov (United States)

Yeşilyaprak, Sevgi Sevi; Yıldırım, Meriç Şenduran; Tomruk, Murat; Ertekin, Özge; Algun, Z Candan

2016-01-01

There is limited information on effective balance training techniques including virtual reality (VR)-based balance exercises in residential settings and no studies have been designed to compare the effects of VR-based balance exercises with conventional balance exercises in older adults living in nursing homes in Turkey. The objective of our study was to investigate the effects of VR-based balance exercises on balance and fall risk in comparison to conventional balance exercises in older adults living in nursing homes. A total sample of 18 subjects (65-82 years of age) with fall history who were randomly assigned to either the VR group (Group 1, n = 7) or the conventional exercise group (Group 2, n = 11) completed the exercise training. In both groups, Berg balance score (BBS), timed up & go duration, and left leg stance and tandem stance duration with eyes closed significantly improved with time (p 0.05) after training, indicating that neither the exercise method was superior. Similar improvements were found in balance and fall risk with VR-based balance training and conventional balance training in older adults living in the nursing home. Both exercise trainings can be preferable by health care professionals considering fall prevention. Appropriate patient selection is essential.

Usefulness of exercise echocardiography in ischemic heart disease. Comparison with exercise cardiac scintigraphy

International Nuclear Information System (INIS)

Tashiro, Hideki; Koyanagi, Samon; Narabayashi, Hideki; Inou, Tetsuji; Takeshita, Akira

1999-01-01

Exercise echocardiography and exercise thallium-201 ( 201 Tl) single photon emission computed tomography (SPECT) were performed in 152 patients with suspected coronary artery disease, including 61 patients with old myocardial infarction. All patients underwent coronary arteriography, and coronary artery disease was defined as ≥75% diameter stenosis. Digital two-dimensional echocardiography was performed before and after the treadmill exercise test, and wall motion abnormality was evaluated using quad-screen. Sensitivity and specificity for the diagnosis of coronary artery disease were similar for the 2 exercise tests (77% and 80% for echocardiography and 75%, and 83% for SPECT, respectively). Diagnoses for one-vessel disease, 2-vessel disease and 3-vessel disease were similar for echocardiography (79%, 72% and 77%, respectively) and SPECT (74%, 75% and 77%, respectively). Sensitivity for the diagnosis of ischemia at the area remote from infarct area was low for both exercise echocardiography and exercise SPECT (45% and 48%, respectively). Exercise echocardiography has comparable diagnostic value to SPECT for the detection of coronary artery disease. However, both exercise tests have limitations for the diagnosis of ischemia at the area remote from infarct area. (author)

Comparison of Exercise Performance in Recreationally Active and Masters Athlete Women.

Science.gov (United States)

Stone, Matthew S; Glenn, Jordan M; Vincenzo, Jennifer L; Gray, Michelle

2018-02-01

Stone, MS, Glenn, JM, Vincenzo, JL, and Gray, M. Comparison of exercise performance in recreationally active and masters athlete women. J Strength Cond Res 32(2): 565-571, 2018-Master athletes (MA) are an understudied, ever-growing cohort. As such, it is important to examine how age affects muscular power and fatigability. Of particular interest is muscular power maintenance and fatigue mitigation of MA compared with young, healthy adults. The purpose of this investigation was to examine the differences in peak power, average power, total work (WRK), and fatigue index (FI) between recreationally active (RA) younger adults and female MA during anaerobic cycling exercise. Two groups, RA (n = 15; 20.6 ± 0.8 years) and MA (n = 17; 50.5 ± 8.6 years), participated in this study. Peak power, APWR, WRK, and FI were measured during a 30-second Wingate maximum anaerobic cycling protocol at a predetermined resistance of 7.5% body mass. Peak power (p = 0.92; RA: 654.1 ± 114.5 W; MA: 658.6 ± 147.6 W), APWR (p = 0.09; RA: 429.8 ± 73.3 W; MA: 384 ± 73.8 W), WRK (p = 0.09; RA: 12,894.3 ± 2,198.3 J; MA: 18,044.3 ± 27,184.9 J), and FI (p = 0.30; RA: 11.8 ± 4.1 W·s; MA: 14 ± 5.2 W·s) were not significantly different between groups. Master athletes produce power and WRK comparable to rates of fatigue among RA. This suggests that MA can maintain physical ability similar to RA in multiple parameters of high-intensity exercise while mitigating fatigue comparably. These data allow for advancements in exercise training and performance outcomes in MA populations. Further research within the MA population is warranted regarding other aspects of exercise and sport performance.

A comparison of the steady-state facility in the RELAP-UK code with the CUSH code and with collant flow in the Winfrith SGHWR

International Nuclear Information System (INIS)

Roberts, H.A.; Smith, C.P.

1976-02-01

Provision of capability for performing steady-state calculations in RELAP-UK has led to the possibility of the wider use of this code for steady-state assessments of the behaviour of commercial systems with complicated circuit arrangements. In the studies discussed in this report, the first objective is to demonstrate the performance of the RELAP-UK code in a steady-state role, and to make comparisons with the CUSH code, and with measurements obtained on the Winfrith Steam-Generating Heavy Water Reactor. (U.K.)

Verification of three dimensional triangular prismatic discrete ordinates transport code ENSEMBLE-TRIZ by comparison with Monte Carlo code GMVP

International Nuclear Information System (INIS)

Homma, Y.; Moriwaki, H.; Ikeda, K.; Ohdi, S.

2013-01-01

This paper deals with the verification of the 3 dimensional triangular prismatic discrete ordinates transport calculation code ENSEMBLE-TRIZ by comparison with the multi-group Monte Carlo calculation code GMVP in a large fast breeder reactor. The reactor is a 750 MWe electric power sodium cooled reactor. Nuclear characteristics are calculated at the beginning of cycle of an initial core and at the beginning and the end of cycle of an equilibrium core. According to the calculations, the differences between the two methodologies are smaller than 0.0002 Δk in the multiplication factor, relatively about 1% in the control rod reactivity, and 1% in the sodium void reactivity. (authors)

Quality Improvement of MARS Code and Establishment of Code Coupling

International Nuclear Information System (INIS)

Chung, Bub Dong; Jeong, Jae Jun; Kim, Kyung Doo

2010-04-01

The improvement of MARS code quality and coupling with regulatory auditing code have been accomplished for the establishment of self-reliable technology based regulatory auditing system. The unified auditing system code was realized also by implementing the CANDU specific models and correlations. As a part of the quality assurance activities, the various QA reports were published through the code assessments. The code manuals were updated and published a new manual which describe the new models and correlations. The code coupling methods were verified though the exercise of plant application. The education-training seminar and technology transfer were performed for the code users. The developed MARS-KS is utilized as reliable auditing tool for the resolving the safety issue and other regulatory calculations. The code can be utilized as a base technology for GEN IV reactor applications

Comparison of results between different precision MAFIA codes

International Nuclear Information System (INIS)

Farkas, D.; Tice, B.

1990-01-01

In order to satisfy the inquiries of the Mafia Code users at SLAC, an evaluation of these codes was done. This consisted of running a cavity with known solutions. This study considered only the time independent solutions. No wake-field calculations were tried. The two machines involved were the NMFECC Cray (e-machine) at LLNL and the IBM/3081 at SLAC. The primary difference between the implementation of the codes on these machines is that the Cray has 64-bit accuracy while the IBM version has 32-bit accuracy. Unfortunately this study is incomplete as the Post-processor (P3) could not be made to work properly on the SLAC machine. This meant that no q's were calculated and no field patterns were generated. A certain amount of guessing had to be done when constructing the comparison tables. This problem aside, the probable conclusions that may be drawn are: (1) thirty-two bit precision is adequate for frequency determination; (2) sixty-four bit precision is desirable for field determination. This conclusion is deduced from the accuracy statistics. The cavity selected for study was a rectangular one with the dimensions (4,3,5) in centimeters. Only half of this cavity was used (2,3,5) with the x dimension being the one that was halved. The boundary conditions (B.C.) on the plane of symmetry were varied between Neumann and Dirichlet so as to cover all possible modes. Ten (10) modes were ran for each boundary condition

Coding in pigeons: Multiple-coding versus single-code/default strategies.

Science.gov (United States)

Pinto, Carlos; Machado, Armando

2015-05-01

To investigate the coding strategies that pigeons may use in a temporal discrimination tasks, pigeons were trained on a matching-to-sample procedure with three sample durations (2s, 6s and 18s) and two comparisons (red and green hues). One comparison was correct following 2-s samples and the other was correct following both 6-s and 18-s samples. Tests were then run to contrast the predictions of two hypotheses concerning the pigeons' coding strategies, the multiple-coding and the single-code/default. According to the multiple-coding hypothesis, three response rules are acquired, one for each sample. According to the single-code/default hypothesis, only two response rules are acquired, one for the 2-s sample and a "default" rule for any other duration. In retention interval tests, pigeons preferred the "default" key, a result predicted by the single-code/default hypothesis. In no-sample tests, pigeons preferred the key associated with the 2-s sample, a result predicted by multiple-coding. Finally, in generalization tests, when the sample duration equaled 3.5s, the geometric mean of 2s and 6s, pigeons preferred the key associated with the 6-s and 18-s samples, a result predicted by the single-code/default hypothesis. The pattern of results suggests the need for models that take into account multiple sources of stimulus control. © Society for the Experimental Analysis of Behavior.

Cellular Automata as an Example for Advanced Beginners’ Level Coding Exercises in a MOOC on Test Driven Development

Directory of Open Access Journals (Sweden)

Thomas Staubitz

2017-06-01

Full Text Available Programming tasks are an important part of teaching computer programming as they foster students to develop essential programming skills and techniques through practice.  The design of educational problems plays a crucial role in the extent to which the experiential knowledge is imparted to the learner both in terms of quality and quantity. Badly designed tasks have been known to put-off students from practicing programming. Hence, there is a need for carefully designed problems. Cellular Automata programming lends itself as a very suitable candidate among problems designed for programming practice. In this paper, we describe how various types of problems can be designed using concepts from Cellular Automata and discuss the features which make them good practice problems with regard to instructional pedagogy. We also present a case study on a Cellular Automata programming exercise used in a MOOC on Test Driven Development using JUnit, and discuss the automated evaluation of code submissions and the feedback about the reception of this exercise by participants in this course. Finally, we suggest two ideas to facilitate an easier approach of creating such programming exercises.

Comparison of LIFE-4 and TEMECH code predictions with TREAT transient test data

International Nuclear Information System (INIS)

Gneiting, B.C.; Bard, F.E.; Hunter, C.W.

1984-09-01

Transient tests in the TREAT reactor were performed on FFTF Reference design mixed-oxide fuel pins, most of which had received prior steady-state irradiation in the EBR-II reactor. These transient test results provide a data base for calibration and verification of fuel performance codes and for evaluation of processes that affect pin damage during transient events. This paper presents a comparison of the LIFE-4 and TEMECH fuel pin thermal/mechanical analysis codes with the results from 20 HEDL TREAT experiments, ten of which resulted in pin failure. Both the LIFE-4 and TEMECH codes provided an adequate representation of the thermal and mechanical data from the TREAT experiments. Also, a criterion for 50% probability of pin failure was developed for each code using an average cumulative damage fraction value calculated for the pins that failed. Both codes employ the two major cladding loading mechanisms of differential thermal expansion and central cavity pressurization which were demonstrated by the test results. However, a detailed evaluation of the code predictions shows that the two code systems weigh the loading mechanism differently to reach the same end points of the TREAT transient results

Code-To-Code Benchmarking Of The Porflow And GoldSim Contaminant Transport Models Using A Simple 1-D Domain - 11191

International Nuclear Information System (INIS)

Hiergesell, R.; Taylor, G.

2010-01-01

end of the string and no-flow lateral flow boundaries. A unit quantity of each contaminant was introduced at the influx boundaries and the rate of outflux at the opposite end of the 10-element string was recorded to make the comparisons. Saturated conditions were assumed in this evaluation. Under these carefully controlled conditions the two codes produced essentially identical results, demonstrating that both codes appear to be accurately implementing the contaminant transport mechanisms. The conclusion is that a satisfactory basis was established to justify the exercise in which 1-D GoldSim model was benchmarked against the 2-D unsaturated zone and 3-D saturated zone Porflow models used at the Savannah River Site (SRS).

Dose and effect of inhaled ozone in resting versus exercising human subjects: comparison with resting rats

Science.gov (United States)

Dose and effect of inhaled ozone in resting versus exercising human subjects: comparison with resting rats Authors: Gary E. Hatch, John McKee, James Brown, Bill McDonnell, Elston Seal, Joleen Soukup, Ralph Slade, Kay Crissman and Robert Devlin, National Health and Environmental...

COMPARISON OF HAMSTRING MUSCLE ACTIVATION DURING HIGH-SPEED RUNNING AND VARIOUS HAMSTRING STRENGTHENING EXERCISES

Science.gov (United States)

Solheim, Jens Asmund Brevik; Bencke, Jesper

2017-01-01

Purpose/Background Several studies have examined the effect of hamstring strength exercises upon hamstring strains in team sports that involve many sprints. However, there has been no cross comparison among muscle activation of these hamstring training exercises with actual sprinting. Therefore, the aim of this study was to examine different hamstring exercises and compare the muscle activity in the hamstring muscle group during various exercises with the muscular activity produced during maximal sprints. Methods Twelve male sports students (age 25 ± 6.2 years, 1.80 ± 7.1 m, body mass 81.1 ± 15.6 kg) participated in this study. Surface EMG electrodes were placed on semimembranosus, semitendinosus and biceps femoris to measure muscle activity during seven hamstrings exercises and sprinting together with 3D motion capture to establish at what hip and knee angles maximal muscle activation (EMG) occurs. Maximal EMG activity during sprints for each muscle was used in order to express each exercise as a percentage of max activation during sprinting. Results The main findings were that maximal EMG activity of the different hamstring exercises were on average between 40-65% (Semitendinosus), 18-40% (biceps femoris) and 40-75% (Semimembranosus) compared with the max EMG activity in sprints, which were considered as 100%. The laying kick together with the Nordic hamstring exercises and its variations had the highest muscle activations, while the cranes showed the lowest muscle activation (in all muscles) together with the standing kick for the semimembranosus. In addition, angles at which the peak EMG activity of the hamstring muscle occurs were similar for the Nordic hamstring exercises and different for the two crane exercises (hip angle), standing kick (hip angle) and the laying kick (knee angle) compared with the sprint. Conclusions Nordic hamstring exercises with its variation together with the laying kick activates the hamstrings at high levels and

A comparison of two nodal codes : Advanced nodal code (ANC) and analytic function expansion nodal (AFEN) code

International Nuclear Information System (INIS)

Chung, S.K.; Hah, C.J.; Lee, H.C.; Kim, Y.H.; Cho, N.Z.

1996-01-01

Modern nodal methods usually employs the transverse integration technique in order to reduce a multi-dimensional diffusion equation to one-dimensional diffusion equations. The use of the transverse integration technique requires two major approximations such as a transverse leakage approximation and a one-dimensional flux approximation. Both the transverse leakage and the one-dimensional flux are approximated by polynomials. ANC (Advanced Nodal Code) developed by Westinghouse employs a modern nodal expansion method for the flux calculation, the equivalence theory for the homogenization error reduction and a group theory for pin power recovery. Unlike the conventional modern nodal methods, AFEN (Analytic Function Expansion Nodal) method expands homogeneous flux distributions within a node into non-separable analytic basis functions, which eliminate two major approximations of the modern nodal methods. A comparison study of AFEN with ANC has been performed to see the applicability of AFEN to commercial PWR and different types of reactors such as MOX fueled reactor. The qualification comparison results demonstrate that AFEN methodology is accurate enough to apply for commercial PWR analysis. The results show that AFEN provides very accurate results (core multiplication factor and assembly power distribution) for cores that exhibit strong flux gradients as in a MOX loaded core. (author)

Offshore code comparison collaboration continuation (OC4), phase I - Results of coupled simulations of an offshore wind turbine with jacket support structure

DEFF Research Database (Denmark)

Popko, Wojciech; Vorpahl, Fabian; Zuga, Adam

2012-01-01

In this paper, the exemplary results of the IEA Wind Task 30 "Offshore Code Comparison Collaboration Continuation" (OC4) Project - Phase I, focused on the coupled simulation of an offshore wind turbine (OWT) with a jacket support structure, are presented. The focus of this task has been the verif......In this paper, the exemplary results of the IEA Wind Task 30 "Offshore Code Comparison Collaboration Continuation" (OC4) Project - Phase I, focused on the coupled simulation of an offshore wind turbine (OWT) with a jacket support structure, are presented. The focus of this task has been...... the verification of OWT modeling codes through code-to-code comparisons. The discrepancies between the results are shown and the sources of the differences are discussed. The importance of the local dynamics of the structure is depicted in the simulation results. Furthermore, attention is given to aspects...

Offshore code comparison collaboration continuation within IEA Wind Task 30: Phase II results regarding a floating semisubmersible wind system

DEFF Research Database (Denmark)

Robertson, Amy; Jonkman, Jason M.; Vorpahl, Fabian

2014-01-01

Offshore wind turbines are designed and analyzed using comprehensive simulation tools (or codes) that account for the coupled dynamics of the wind inflow, aerodynamics, elasticity, and controls of the turbine, along with the incident waves, sea current, hydrodynamics, mooring dynamics, and founda......Offshore wind turbines are designed and analyzed using comprehensive simulation tools (or codes) that account for the coupled dynamics of the wind inflow, aerodynamics, elasticity, and controls of the turbine, along with the incident waves, sea current, hydrodynamics, mooring dynamics......, and foundation dynamics of the support structure. This paper describes the latest findings of the code-to-code verification activities of the Offshore Code Comparison Collaboration Continuation project, which operates under the International Energy Agency Wind Task 30. In the latest phase of the project......, participants used an assortment of simulation codes to model the coupled dynamic response of a 5-MW wind turbine installed on a floating semisubmersible in 200 m of water. Code predictions were compared from load case simulations selected to test different model features. The comparisons have resulted...

Comparison of the eight weeks of supplementation Creatine and Glutamine consumption along with resistance exercise on the level of ALP in female mice

Directory of Open Access Journals (Sweden)

A eskandari

2015-11-01

Full Text Available Background and purpose: in recent years, in order to improve power, speed, the increase in the volume of the musculature, preventing sports injuries and maintain the muscle performance athletes use from different resistance exercises and food supplements. In this regard, present study has been conducted with the aim of comparison the influence of an 8 week period consumption of creatine (2 gr.kg-1.day-1 in 1st week and 0.48 gr.kg-1.day-1during 2nd to 8th weeks and glutamine (1 gr.kg-1.day-1 from first to eighth weeks along with resistance exercise on level of ALP of female mice. Materials and methods: This experimental study was done on 80 Small adult female mice of Surrey species (28 ± 5 gram. The animals were randomly divided into 8 groups of: resistance exercise, resistance exercise + creatine, resistance exercise + glutamine, resistance exercise + glutamine + creatine, creatine, glutamine, creatine + glutamine and control groups (N= 10. Resistance exercise (5 days a week was including: climbing (4 sets, 5 times repetition with two minutes rest between the sets from a ladder (with the height of one meter and including 26 steps and bearing 30 percent of the weight of the Mouse body (hanging from tail in the first week and the increasing it up to 200 percent of body weight till the last week of the experiment. During 48 hours after the last practice session of resistance exercise, the blood sample was taken and the the level of ALP has been measured. Findings:The results showed that the level of ALP enzyme in creatine + glutamine + resistance exercise groug had been increased in comparison with the control group (144.3 ± 15.86 in comparison with 234.7 ± 25.69 U.L-1 P < 0.05. Conclusion: The results of this research indicate Creatine and Glutamine supplementation consumption along with resistance exercise increases in the level of ALP enzyme in the liver of mice.

Comparison of neutron diffusion theory codes in two and three space dimensions using a sodium cooled fast reactor benchmark

International Nuclear Information System (INIS)

Butland, A.T.D.; Putney, J.; Sweet, D.W.

1980-04-01

This report describes work performed to compare two UK neutron diffusion theory codes, TIGAR and SNAP, with published results for eight other codes available abroad. Both mesh edge and mesh centred finite difference diffusion theory codes as well as one axial synthesis code are included in the comparison and a range of iteration procedures are used by them. Comparison is made of calculations for a model of the sodium cooled fast reactor SNR-300 in both triangular and rectangular geometry and for a range of spatial meshes, enabling extrapolations to infinite mesh to be made. Calculated values of the effective multiplication constant, keff, for all the codes, agree very well when extrapolated to infinite mesh, indicating that no significant errors arising from the finite difference approximation but independent of mesh spacing are present in the calculations. The variation of keff with mesh area is found to be linear for the small meshes considered here, with the gradients for the mesh centred and mesh edged codes being of opposite sign. The results obtained using the mesh centred codes TIGAR, SNAP and CITATION agree closely with one another for all the meshes considered; the mesh edge codes agree less closely. (author)

Results of aerosol code comparisons with releases from ACE MCCI tests

International Nuclear Information System (INIS)

Fink, J.K.; Corradini, M.; Hidaka, A.; Hontanon, E.; Mignanelli, M.A.; Schroedl, E.; Strizhov, V.

1992-01-01

Results of aerosol release calculations by six groups from six countries are compared with the releases from ACE MCCI Test L6. The codes used for these calculations included: SOLGASMIX-PV, SOLGASMIX Reactor 1986, CORCON.UW, VANESA 1.01, and CORCON mod2.04/VANESA 1.01. Calculations were performed with the standard VANESA 1.01 code and with modifications to the VANESA code such as the inclusion of various zirconium-silica chemical reactions. Comparisons of results from these calculations were made with Test L6 release fractions for U, Zr, Si, the fission-product elements Te, Ba, Sr, Ce, La, Mo and control materials Ag, In, and Ru. Reasonable agreement was obtained between calculations and Test L6 results for the volatile elements Ag, In and Te. Calculated releases of the low volatility fission products ranged from within an order of magnitude to five orders of magnitude of Test L6 values. Releases were over and underestimated by calculations. Poorest agreements were obtained for Mo and Si

Yoga and physical exercise - a review and comparison.

Science.gov (United States)

Govindaraj, Ramajayam; Karmani, Sneha; Varambally, Shivarama; Gangadhar, B N

2016-06-01

Yoga is a multifaceted spiritual tool with enhanced health and well-being as one of its positive effects. The components of yoga which are very commonly applied for health benefits are asanas (physical postures), pranayama (regulated breathing) and meditation. In the context of asanas, yoga resembles more of a physical exercise, which may lead to the perception that yoga is another kind of physical exercise. This article aims at exploring the commonalities and differences between yoga and physical exercise in terms of concepts, possible mechanisms and effectiveness for health benefits. A narrative review is undertaken based on traditional and contemporary literature for yoga, along with scientific articles available on yoga and exercise including head-to-head comparative trials with healthy volunteers and patients with various disease conditions. Physical exercises and the physical components of yoga practices have several similarities, but also important differences. Evidence suggests that yoga interventions appear to be equal and/or superior to exercise in most outcome measures. Emphasis on breath regulation, mindfulness during practice, and importance given to maintenance of postures are some of the elements which differentiate yoga practices from physical exercises.

OECOSYS prevailing exercise applications

International Nuclear Information System (INIS)

Mueck, K.; Suda, M.

1999-10-01

In the Research Center Seibersdorf the computer simulation code OECOSYS was installed in 1989 which represents a version of the model ECOSYS-87 developed by GSF in Neuherberg, and adapted to the Austrian situation. The model available since then simulates from input parameters such as the integral of the activity concentration in air and the ground deposition of each radionuclide as well as the precipitation values via the interception on plants and deposition on soil and the transfer of radionuclides into the various ecosystems and fodder-food chains into the various foodstuffs and calculates in this way the course of the activity concentration in these foodstuffs. Via the consumption rates of each foodstuff the contribution of the ingestion of each foodstuff and by that the total ingestion dose may be evaluated. Further, the simulation model permits the calculation of the various exposure pathways as inhalation and external irradiation from the plume and ground and enable the user to obtain a fast comparison of the various exposure pathways. In order to ensure the availability of the code and the accompanying infrastructure, by order of the federal chancellery sect. VI the computer code is run in certain intervals and test calculations are performed with it. Each exercise run was based on scenarios which could result in case of severe accidents in neighboring nuclear power plants. Generally, extremely unrealistic scenarios were assumed which do not correspond to the safety standard of the respective nuclear power plant in order to obtain calculation examples which may serve the emergency units in their planning for emergency situations. Furthermore, by these exercise runs a demonstration of the contribution of the various exposure pathways for the persons responsible for emergency management in case of a crisis shall be given to enable them to appropriately design the respective planning features. In the present report the calculations performed up to now are

A comparison of two fully coupled codes for integrated dynamic analysis of floating vertical axis wind turbines

NARCIS (Netherlands)

Koppenol, Boy; Cheng, Zhengshun; Gao, Zhen; Simao Ferreira, C.; Moan, T; Tande, John Olav Giæver; Kvamsdal, Trond; Muskulus, Michael

2017-01-01

This paper presents a comparison of two state-of-the-art codes that are capable of modelling floating vertical axis wind turbines (VAWTs) in fully coupled time-domain simulations, being the HAWC2 by DTU and the SIMO-RIFLEX-AC code by NTNU/MARINTEK. The comparative study focusses on the way

Fuel model studies. Comparison of our present version of GAPCON-THERMAL-2 with results from the EPRI code comparison study. Partial report

International Nuclear Information System (INIS)

Malen, K.; Jansson, L.

1978-08-01

Runs with our present version of GAPCON-THERMAL-2 have been compared to results from the EPRI code comparison study. Usually also our version of GAPCON predicts high temperatures, 100-300 K or 10-15% higher than average code predictions and experimental results. The well-known temperaturegas release instablility is found also with GAPCON. In this case one identifies the gas release limits 1400 deg C and 1700 deg C as instablility points. (author)

Do nonexercisers also share the positive exerciser stereotype?: An elicitation and comparison of beliefs about exercisers.

Science.gov (United States)

Rodgers, Wendy M; Hall, Craig R; Wilson, Philip M; Berry, Tanya R

2009-02-01

The purpose of this research was to examine whether exercisers and nonexercisers are rated similarly on a variety of characteristics by a sample of randomly selected regular exercisers, nonexercisers who intend to exercise, and nonexercisers with no intention to exercise. Previous research by Martin Ginis et al. (2003) has demonstrated an exerciser stereotype that advantages exercisers. It is unknown, however, the extent to which an exerciser stereotype is shared by nonexercisers, particularly nonintenders. Following an item-generation procedure, a sample of 470 (n=218 men; n=252 women) people selected using random digit dialing responded to a questionnaire assessing the extent to which they agreed that exercisers and nonexercisers possessed 24 characteristics, such as "happy," "fit," "fat," and "lazy." The results strongly support a positive exerciser bias, with exercisers rated more favorably on 22 of the 24 items. The degree of bias was equivalent in all groups of respondents. Examination of the demographic characteristics revealed no differences among the three groups on age, work status, or child-care responsibilities, suggesting that there is a pervasive positive exerciser bias.

Athletes and Sedentary Individuals: An Intergroup Comparison Utilizing a Pulmonary Function Ratio Obtained During Submaximal Exercise.

Science.gov (United States)

Maud, Peter J.

A pulmonary function ratio describing oxygen extraction from alveolar ventilation was used for an intergroup comparison between three groups of athletes (rugby, basketball, and football players) and one group of sedentary subjects during steady-state submaximal exercise. The ratio and its component parts are determined from only three gas…

Comparisons of the simulation results using different codes for ADS spallation target

International Nuclear Information System (INIS)

Yu Hongwei; Fan Sheng; Shen Qingbiao; Zhao Zhixiang; Wan Junsheng

2002-01-01

The calculations to the standard thick target were made by using different codes. The simulation of the thick Pb target with length of 60 cm, diameter of 20 cm bombarded with 800, 1000, 1500 and 2000 MeV energetic proton beam was carried out. The yields and the spectra of emitted neutron were studied. The spallation target was simulated by SNSP, SHIELD, DCM/CEM (Dubna Cascade Model /Cascade Evaporation Mode) and LAHET codes. The Simulation Results were compared with experiments. The comparisons show good agreement between the experiments and the SNSP simulated leakage neutron yield. The SHIELD simulated leakage neutron spectra are in good agreement with the LAHET and the DCM/CEM simulated leakage neutron spectra

Reconciliation of international administrative coding systems for comparison of colorectal surgery outcome.

Science.gov (United States)

Munasinghe, A; Chang, D; Mamidanna, R; Middleton, S; Joy, M; Penninckx, F; Darzi, A; Livingston, E; Faiz, O

2014-07-01

Significant variation in colorectal surgery outcomes exists between different countries. Better understanding of the sources of variable outcomes using administrative data requires alignment of differing clinical coding systems. We aimed to map similar diagnoses and procedures across administrative coding systems used in different countries. Administrative data were collected in a central database as part of the Global Comparators (GC) Project. In order to unify these data, a systematic translation of diagnostic and procedural codes was undertaken. Codes for colorectal diagnoses, resections, operative complications and reoperative interventions were mapped across the respective national healthcare administrative coding systems. Discharge data from January 2006 to June 2011 for patients who had undergone colorectal surgical resections were analysed to generate risk-adjusted models for mortality, length of stay, readmissions and reoperations. In all, 52 544 case records were collated from 31 institutions in five countries. Mapping of all the coding systems was achieved so that diagnosis and procedures from the participant countries could be compared. Using the aligned coding systems to develop risk-adjusted models, the 30-day mortality rate for colorectal surgery was 3.95% (95% CI 0.86-7.54), the 30-day readmission rate was 11.05% (5.67-17.61), the 28-day reoperation rate was 6.13% (3.68-9.66) and the mean length of stay was 14 (7.65-46.76) days. The linkage of international hospital administrative data that we developed enabled comparison of documented surgical outcomes between countries. This methodology may facilitate international benchmarking. Colorectal Disease © 2014 The Association of Coloproctology of Great Britain and Ireland.

Dual Coding, Reasoning and Fallacies.

Science.gov (United States)

Hample, Dale

1982-01-01

Develops the theory that a fallacy is not a comparison of a rhetorical text to a set of definitions but a comparison of one person's cognition with another's. Reviews Paivio's dual coding theory, relates nonverbal coding to reasoning processes, and generates a limited fallacy theory based on dual coding theory. (PD)

Fracture flow code

International Nuclear Information System (INIS)

Dershowitz, W; Herbert, A.; Long, J.

1989-03-01

The hydrology of the SCV site will be modelled utilizing discrete fracture flow models. These models are complex, and can not be fully cerified by comparison to analytical solutions. The best approach for verification of these codes is therefore cross-verification between different codes. This is complicated by the variation in assumptions and solution techniques utilized in different codes. Cross-verification procedures are defined which allow comparison of the codes developed by Harwell Laboratory, Lawrence Berkeley Laboratory, and Golder Associates Inc. Six cross-verification datasets are defined for deterministic and stochastic verification of geometric and flow features of the codes. Additional datasets for verification of transport features will be documented in a future report. (13 figs., 7 tabs., 10 refs.) (authors)

Comparative analysis of exercise 2 results of the OECD WWER-1000 MSLB benchmark

International Nuclear Information System (INIS)

Kolev, N.; Petrov, N.; Royer, E.; Ivanov, B.; Ivanov, K.

2006-01-01

In the framework of joint effort between OECD/NEA, US DOE and CEA France a coupled three-dimensional (3D) thermal-hydraulic/neutron kinetics benchmark for WWER-1000 was defined. Phase 2 of this benchmark is labeled W1000CT-2 and consists of calculation of a vessel mixing experiment and main steam line break (MSLB) transients. The reference plant is Kozloduy-6 in Bulgaria. Plant data are available for code validation consisting of one experiment of pump start-up (W1000CT-1) and one experiment of steam generator isolation (W1000CT-2). The validated codes can be used to calculate asymmetric MSLB transients involving similar mixing patterns. This paper summarizes a comparison of the available results for W1000CT-2 Exercise 2 devoted to core-vessel calculation with imposed MSLB vessel boundary conditions. Because of the recent re-calculation of the cross-section libraries, core physics results from PARCS and CRONOS codes could be compared only. The comparison is code-to-code (including BIPR7A/TVS-M lib) and code vs. plant measured data in a steady state close to the MSLB initial state. The results provide a test of the cross-section libraries and show a good agreement of plant measured and computed data. The comparison of full vessel calculations was made from the point of view of vessel mixing, considering mainly the coarse-mesh features of the flow. The FZR and INRNE results from multi-1D calculations with different mixing models are similar, while the FZK calculations with a coarse-3D vessel model show deviations from the others. These deviations seem to be due to an error in the use of a boundary condition after flow reversal (Authors)

GAM-HEAT -- a computer code to compute heat transfer in complex enclosures

International Nuclear Information System (INIS)

Cooper, R.E.; Taylor, J.R.; Kielpinski, A.L.; Steimke, J.L.

1991-02-01

The GAM-HEAT code was developed for heat transfer analyses associated with postulated Double Ended Guillotine Break Loss Of Coolant Accidents (DEGB LOCA) resulting in a drained reactor vessel. In these analyses the gamma radiation resulting from fission product decay constitutes the primary source of energy as a function of time. This energy is deposited into the various reactor components and is re- radiated as thermal energy. The code accounts for all radiant heat exchanges within and leaving the reactor enclosure. The SRS reactors constitute complex radiant exchange enclosures since there are many assemblies of various types within the primary enclosure and most of the assemblies themselves constitute enclosures. GAM-HEAT accounts for this complexity by processing externally generated view factors and connectivity matrices, and also accounts for convective, conductive, and advective heat exchanges. The code is applicable for many situations involving heat exchange between surfaces within a radiatively passive medium. The GAM-HEAT code has been exercised extensively for computing transient temperatures in SRS reactors with specific charges and control components. Results from these computations have been used to establish the need for and to evaluate hardware modifications designed to mitigate results of postulated accident scenarios, and to assist in the specification of safe reactor operating power limits. The code utilizes temperature dependence on material properties. The efficiency of the code has been enhanced by the use of an iterative equation solver. Verification of the code to date consists of comparisons with parallel efforts at Los Alamos National Laboratory and with similar efforts at Westinghouse Science and Technology Center in Pittsburgh, PA, and benchmarked using problems with known analytical or iterated solutions. All comparisons and tests yield results that indicate the GAM-HEAT code performs as intended

Investigation of the efficiency and qualification of computer codes for PSA

International Nuclear Information System (INIS)

Andernacht, M.; Dinsmore, S.

1992-01-01

An international selection of computer codes for the quantification of level 1 PSA models was evaluated due to the consistence of results of different Benchmark exercises. The exercises in this project are based on those developed during the first benchmark project (Phase I). Due to several large differences in the results during Phase I of the Benchmark, the exercises in Phase II were more precisely defined. Due to the improved definition of the benchmark exercises, the results delivered from the different computer codes for Phase II are much more consistent. In general, the results of Benchmark II show, that the exercises were defined well enough to allow consistant results to be generated. Thus, the exercises can also be used to support the evaluation of additional PSA programs. (orig.) [de

Code accuracy evaluation of ISP 35 calculations based on NUPEC M-7-1 test

International Nuclear Information System (INIS)

Auria, F.D.; Oriolo, F.; Leonardi, M.; Paci, S.

1995-01-01

Quantitative evaluation of code uncertainties is a necessary step in the code assessment process, above all if best-estimate codes are utilised for licensing purposes. Aiming at quantifying the code accuracy, an integral methodology based on the Fast Fourier Transform (FFT) has been developed at the University of Pisa (DCMN) and has been already applied to several calculations related to primary system test analyses. This paper deals with the first application of the FFT based methodology to containment code calculations based on a hydrogen mixing and distribution test performed in the NUPEC (Nuclear Power Engineering Corporation) facility. It is referred to pre-test and post-test calculations submitted for the International Standard Problem (ISP) n. 35. This is a blind exercise, simulating the effects of steam injection and spray behaviour on gas distribution and mixing. The result of the application of this methodology to nineteen selected variables calculated by ten participants are here summarized, and the comparison (where possible) of the accuracy evaluated for the pre-test and for the post-test calculations of a same user is also presented. (author)

Comparison of ATF and TJ-II stellarator equilibria as computed by the 3-D VMEC and PIES codes

International Nuclear Information System (INIS)

Johnson, J.L.; Monticello, D.A.; Reiman, A.H.; Hirshman, S.P.

1992-01-01

A comparison is made of results from the PIES code, which determines the equilibrium properties of three-dimensional toroidal configurations by direct integration along the magnetic field lines, with those from the VMEC code, which uses an energy minimization in a flux representation to determine the equilibrium configuration, for two devices: the ATF stellarator at Oak Ridge and the TJ-11 heliac which is being built in Madrid. The results obtained from the two codes are in good agreement, providing additional validation for the codes

A Comparison of Source Code Plagiarism Detection Engines

Science.gov (United States)

Lancaster, Thomas; Culwin, Fintan

2004-06-01

Automated techniques for finding plagiarism in student source code submissions have been in use for over 20 years and there are many available engines and services. This paper reviews the literature on the major modern detection engines, providing a comparison of them based upon the metrics and techniques they deploy. Generally the most common and effective techniques are seen to involve tokenising student submissions then searching pairs of submissions for long common substrings, an example of what is defined to be a paired structural metric. Computing academics are recommended to use one of the two Web-based detection engines, MOSS and JPlag. It is shown that whilst detection is well established there are still places where further research would be useful, particularly where visual support of the investigation process is possible.

Table top exercises a teaching and research tool

International Nuclear Information System (INIS)

Lakey, J.R.A.

1990-01-01

Table Top Exercises have been used in training Command and Control Teams at the Royal Naval College Greenwich for over 10 years since they allow a wide range of scenarios to be reviewed. The exercise commences with the scene setting information and the teams reaction to the information proceeds like a seminar. This technique is surprisingly effective but it lacks feed back and is not necessarily performed in real-time so a formal exercise based on a real accident was designed. The staff solution to the event was derived from the NRC Advisory Documents. The exercise was limited to the Early Phase of a real accident which had occurred in the USA but it was suitably disguised and based on data presented in an information booklet which the trainees were expected to read and digest before the exercise commenced. This exercise has been tested at the University of Surrey, in Sweden and at Harvard University and to date over 200 people have participated. On each application the exercise was modified and it became apparent that real-time environmental data was needed and this was met by the IRDAM code. The code was used initially to extrapolate limited measurements to outer areas of the Emergency Planning Zone. Substantial difficulties emerged for the teams who were not usually qualified nuclear engineers: confusion in the use of radiation units, numeracy of the candidates, inadequate input data, inability to interpret the output and errors made due to stress and communication difficulties. DNST has made some improvements to the interfacing of the codes and these will be reported

Comparison of aerosol behavior codes with experimental results from a sodium fire in a containment

International Nuclear Information System (INIS)

Lhiaubet, G.; Kissane, M.P.; Seino, H.; Miyake, O.; Himeno, Y.

1990-01-01

The containment expert group (CONT), a subgroup of the CEC fast reactor Safety Working Group (SWG), has carried out several studies on the behavior of sodium aerosols which might form in a severe fast reactor accident during which primary sodium leaks into the secondary containment. These studies comprise an intercalibration of measurement devices used to determine the aerosol particle size spectrum, and the analysis and comparison of codes applied to the determination of aerosol behavior in a reactor containment. The paper outlines the results of measurements of typical data made for aerosols produced in a sodium fire and their comparison with results from different codes (PARDISEKO, AEROSIM, CONTAIN, AEROSOLS/B2). The sodium fire experiment took place at CEN-Cadarache (France) in a 400 m 3 vessel. The fire lasted 90 minutes and the aerosol measurements were made over 10 hours at different locations inside the vessel. The results showed that the suspended mass calculated along the time with different codes was in good agreement with the experiment. However, the calculated aerosol deposition on the walls was diverging and always significantly lower than the measured values

Light-water reactor safety analysis codes

International Nuclear Information System (INIS)

Jackson, J.F.; Ransom, V.H.; Ybarrondo, L.J.; Liles, D.R.

1980-01-01

A brief review of the evolution of light-water reactor safety analysis codes is presented. Included is a summary comparison of the technical capabilities of major system codes. Three recent codes are described in more detail to serve as examples of currently used techniques. Example comparisons between calculated results using these codes and experimental data are given. Finally, a brief evaluation of current code capability and future development trends is presented

Experimental research and comparison of LDPC and RS channel coding in ultraviolet communication systems.

Science.gov (United States)

Wu, Menglong; Han, Dahai; Zhang, Xiang; Zhang, Feng; Zhang, Min; Yue, Guangxin

2014-03-10

We have implemented a modified Low-Density Parity-Check (LDPC) codec algorithm in ultraviolet (UV) communication system. Simulations are conducted with measured parameters to evaluate the LDPC-based UV system performance. Moreover, LDPC (960, 480) and RS (18, 10) are implemented and experimented via a non-line-of-sight (NLOS) UV test bed. The experimental results are in agreement with the simulation and suggest that based on the given power and 10(-3)bit error rate (BER), in comparison with an uncoded system, average communication distance increases 32% with RS code, while 78% with LDPC code.

Coding theory and cryptography the essentials

CERN Document Server

Hankerson, DC; Leonard, DA; Phelps, KT; Rodger, CA; Wall, JR; Wall, J R

2000-01-01

Containing data on number theory, encryption schemes, and cyclic codes, this highly successful textbook, proven by the authors in a popular two-quarter course, presents coding theory, construction, encoding, and decoding of specific code families in an ""easy-to-use"" manner appropriate for students with only a basic background in mathematics offering revised and updated material on the Berlekamp-Massey decoding algorithm and convolutional codes. Introducing the mathematics as it is needed and providing exercises with solutions, this edition includes an extensive section on cryptography, desig

Fundamentals of information theory and coding design

CERN Document Server

Togneri, Roberto

2003-01-01

In a clear, concise, and modular format, this book introduces the fundamental concepts and mathematics of information and coding theory. The authors emphasize how a code is designed and discuss the main properties and characteristics of different coding algorithms along with strategies for selecting the appropriate codes to meet specific requirements. They provide comprehensive coverage of source and channel coding, address arithmetic, BCH, and Reed-Solomon codes and explore some more advanced topics such as PPM compression and turbo codes. Worked examples and sets of basic and advanced exercises in each chapter reinforce the text's clear explanations of all concepts and methodologies.

Results of the Monte Carlo 'simple case' benchmark exercise

International Nuclear Information System (INIS)

2003-11-01

A new 'simple case' benchmark intercomparison exercise was launched, intended to study the importance of the fundamental nuclear data constants, physics treatments and geometry model approximations, employed by Monte Carlo codes in common use. The exercise was also directed at determining the level of agreement which can be expected between measured and calculated quantities, using current state or the art modelling codes and techniques. To this end, measurements and Monte Carlo calculations of the total (or gross) neutron count rates have been performed using a simple moderated 3 He cylindrical proportional counter array or 'slab monitor' counting geometry, deciding to select a very simple geometry for this exercise

Comparison of european computer codes relative to the aerosol behavior in PWR containment buildings during severe core damage accidents

International Nuclear Information System (INIS)

Fermandjian, J.; Beonio-Brocchieri, F.

1986-09-01

The present study concerns a comparative exercise, performed within the framework of the Commission of the European Communities, of the computer codes used in reactor safety in order to assess their capability of realistically describing the aerosol behavior in PWR reactor containment buildings during severe accidents. The codes included in the present study are the following: AEROSIM-M, AEROSOLS/Bl, CORRAL-2, NAUA Mod5. In AEROSIM-M, AEROSOLS/Bl and NAUA Mod5, the integro-differential equation for the evolution of the particle mass distribution is approximated by a set of coupled first order differential equations. To this end, the particle distribution function is replaced by a number of discrete monodisperse fractions. The CORRAL-2 has an essentially empirical basis (processes not explicitely modelled, but their net effects accounted for). The physical processes taken into account in the codes are shown finally

The Effect of Exercise in PCOS Women Who Exercise Regularly

OpenAIRE

Khademi; Alleyassin; Aghahosseini; Tabatabaeefar; Amini

2010-01-01

Purpose To determine the prevalence of polycystic ovary syndrome (PCOS) in women who exercise regularly. Methods All women under age 45 from an industrial company who had past history of exercising more than 6 months enrolled in this cross-sectional study. Prevalence of PCOS and comparison of BMI between PCOS and non-PCOS subgroups was done. The diagnosis of PCOS was based on the revised 2003 Rotterdam ESHRE/ASRM consensus criteri...

SPACE CHARGE SIMULATION METHODS INCORPORATED IN SOME MULTI - PARTICLE TRACKING CODES AND THEIR RESULTS COMPARISON

International Nuclear Information System (INIS)

BEEBE - WANG, J.; LUCCIO, A.U.; D IMPERIO, N.; MACHIDA, S.

2002-01-01

Space charge in high intensity beams is an important issue in accelerator physics. Due to the complicity of the problems, the most effective way of investigating its effect is by computer simulations. In the resent years, many space charge simulation methods have been developed and incorporated in various 2D or 3D multi-particle-tracking codes. It has becoming necessary to benchmark these methods against each other, and against experimental results. As a part of global effort, we present our initial comparison of the space charge methods incorporated in simulation codes ORBIT++, ORBIT and SIMPSONS. In this paper, the methods included in these codes are overviewed. The simulation results are presented and compared. Finally, from this study, the advantages and disadvantages of each method are discussed

SPACE CHARGE SIMULATION METHODS INCORPORATED IN SOME MULTI - PARTICLE TRACKING CODES AND THEIR RESULTS COMPARISON.

Energy Technology Data Exchange (ETDEWEB)

BEEBE - WANG,J.; LUCCIO,A.U.; D IMPERIO,N.; MACHIDA,S.

2002-06-03

Space charge in high intensity beams is an important issue in accelerator physics. Due to the complicity of the problems, the most effective way of investigating its effect is by computer simulations. In the resent years, many space charge simulation methods have been developed and incorporated in various 2D or 3D multi-particle-tracking codes. It has becoming necessary to benchmark these methods against each other, and against experimental results. As a part of global effort, we present our initial comparison of the space charge methods incorporated in simulation codes ORBIT++, ORBIT and SIMPSONS. In this paper, the methods included in these codes are overviewed. The simulation results are presented and compared. Finally, from this study, the advantages and disadvantages of each method are discussed.

Attenuation of morphine withdrawal signs, blood cortisol and glucose level with forced exercise in comparison with clonidine

Directory of Open Access Journals (Sweden)

Majid Motaghinejad

2014-01-01

Full Text Available Background: Morphine withdrawal usually results in undesired outcomes , despite partial benefits of alternative medication such as methadone, because of the lack of mental sedation during the withdrawal period, may not lead to the desired result. In this study, forced exercise by treadmill is used to manage morphine dependence in animal model. Materials and Methods: Forty adult male mice were divided into 5 groups, from which 4 groups became dependent by increasing daily doses of morphine for 6 days (20-45 mg/kg, SC. Afterwards, the animals were treated for 21 days by either of the following protocol: Positive control (dependent received once daily 45 mg/kg of morphine sulfate (SC for 21 day, group under treatment by clonidine (0.4 mg/kg, SC for 21 day group under treatment by forced exercise by treadmill for 21 day, group under treatment by combination of clonidine (0.4 mg/kg, SC and forced exercise by treadmill for 21day and the negative control group(independent received saline injection like other groups. Each of this administration was injected at 8 AM. Finally, in the test day (day 28, all animals received a single dose of naloxone (3 mg/kg, SC at 8 AM and then were observed for withdrawal signs, and Total Withdrawal Score (TWS was determined as described previously. After withdrawal sign evaluation for evaluation of stress level of dependent mice, blood cortisol and glucose level were measured in non-fasting situations well. Results: This study showed that TWS significantly decreased in all treatment groups in comparison with positive control group (P < 0.001. Moreover, blood cortisol and glucose level significantly decreased in group under treatment by clonidine (0.4 mg/kg and group under treatment by combination of clonidine (0.4 mg/kg and forced exercise by treadmill groups in comparison with control positive (dependent (P < 0.05. Conclusion: This study suggested that forced exercise can be useful as adjunct therapy in dependent people

Comparison of two LES codes for wind turbine wake studies

International Nuclear Information System (INIS)

Sarlak, H; Mikkelsen, R; Sørensen, J N; Pierella, F

2014-01-01

For the third time a blind test comparison in Norway 2013, was conducted comparing numerical simulations for the rotor C p and C t and wake profiles with the experimental results. As the only large eddy simulation study among participants, results of the Technical University of Denmark (DTU) using their in-house CFD solver, EllipSys3D, proved to be more reliable among the other models for capturing the wake profiles and the turbulence intensities downstream the turbine. It was therefore remarked in the workshop to investigate other LES codes to compare their performance with EllipSys3D. The aim of this paper is to investigate on two CFD solvers, the DTU's in-house code, EllipSys3D and the open-sourse toolbox, OpenFoam, for a set of actuator line based LES computations. Two types of simulations are performed: the wake behind a signle rotor and the wake behind a cluster of three inline rotors. Results are compared in terms of velocity deficit, turbulence kinetic energy and eddy viscosity. It is seen that both codes predict similar near-wake flow structures with the exception of OpenFoam's simulations without the subgrid-scale model. The differences begin to increase with increasing the distance from the upstream rotor. From the single rotor simulations, EllipSys3D is found to predict a slower wake recovery in the case of uniform laminar flow. From the 3-rotor computations, it is seen that the difference between the codes is smaller as the disturbance created by the downstream rotors causes break down of the wake structures and more homogenuous flow structures. It is finally observed that OpenFoam computations are more sensitive to the SGS models

The fast code

Energy Technology Data Exchange (ETDEWEB)

Freeman, L.N.; Wilson, R.E. [Oregon State Univ., Dept. of Mechanical Engineering, Corvallis, OR (United States)

1996-09-01

The FAST Code which is capable of determining structural loads on a flexible, teetering, horizontal axis wind turbine is described and comparisons of calculated loads with test data are given at two wind speeds for the ESI-80. The FAST Code models a two-bladed HAWT with degrees of freedom for blade bending, teeter, drive train flexibility, yaw, and windwise and crosswind tower motion. The code allows blade dimensions, stiffnesses, and weights to differ and models tower shadow, wind shear, and turbulence. Additionally, dynamic stall is included as are delta-3 and an underslung rotor. Load comparisons are made with ESI-80 test data in the form of power spectral density, rainflow counting, occurrence histograms, and azimuth averaged bin plots. It is concluded that agreement between the FAST Code and test results is good. (au)

German nuclear codes revised: comparison with approaches used in other countries

International Nuclear Information System (INIS)

Raetzke, C.; Micklinghoff, M.

2005-01-01

The article deals with the plan of the German Federal Ministry for the Environment (BMU) to revise the German set of nuclear codes, and draws a comparison with approaches pursued in other countries in formulating and implementing new requirements imposed upon existing plants. A striking feature of the BMU project is the intention to have the codes reflect the state of the art in an entirely abstract way irrespective of existing plants. This implies new requirements imposed on plant design, among other things. However, the state authorities, which establish the licensing conditions for individual plants in concrete terms, will not be able to apply these new codes for legal reasons (protection of vested rights) to the extent in which they incorporate changes in safety philosophy. Also the procedure adopted has raised considerable concern. The processing time of two years is inordinately short, and participation of the public and of industry does not go beyond the strictly formal framework of general public participation. In the light of this absence of quality assurance, it would be surprising if this new set of codes did not suffer from considerable deficits in its contents. Other countries show that the BMU is embarking on an isolated approach in every respect. Elsewhere, backfitting requirements are developed carefully and over long periods of time; they are discussed in detail with the operators; costs and benefits are weighted, and the consequences are evaluated. These elements are in common to procedures in all countries, irrespective of very different steps in detail. (orig.)

Report on a study of the feasibility of use of the COLUMN2 computer program in a probabilistic risk assessment code

International Nuclear Information System (INIS)

Hall, R.C.; Liew, S.K.

1986-10-01

This report contains the results of a feasibility study carried out on the COLUMN2 computer program to assess its potential for use in time-dependent probabilistic risk assessment code for radiological assessment purposes. COLUMN2 is a program which provides predictions of nuclide transport in a one-dimensional geosphere configuration using a simple Ksub(d) approach for sorption. A moving grid numerical solver is used and the program is therefore potentially capable of handling time-dependent parameters. The reported work covers aspects of code acquisition, loading, theory and structure, necessary code modifications and testing, the last aspect including two documented test cases from the COLUMN2 manual and verification tests derived from international comparison exercises. Recommendations are made as to the required code development of COLUMN2 in order that the code is capable of fulfilling its prime role as defined by the System Design Working Group in a pra code. (author)

A randomized comparison study regarding the impact of short-duration, high-intensity exercise and traditional exercise on anthropometric and body composition measurement changes in post-menopausal women--A pilot study.

Science.gov (United States)

Grossman, Joan A Cebrick; Payne, Ellen K

2016-03-01

The mode and duration of exercise necessary to change body composition and reduce weight remains debatable. Menopause results in hormonal changes that preclude weight loss. This randomized pilot study compared the effects of short-duration, high-intensity interval training and traditional exercise on anthropometric and body composition measurement changes in post-menopausal women. To compare the effects of short-duration, high-intensity interval training and traditional methods of exercise (walking) on anthropometric, body composition and body weight change over a 12-week period. Subjects (N = 18) were post-menopausal, sedentary female volunteers, randomly assigned into one of two exercise groups. Both groups exercised five out of seven days for 12 weeks. The resistance group (n = 8) (54.3 ± 7.3 years; BMI = 28.0 ± 2.1 kg/m(2); mean ± SD) exercised for 15.0 ± 3.5 min, which consisted of five different exercise routines including upper and lower extremity, a cardio segment, yoga and abdominal exercises. The walkers (n = 10) (56.6 ± 5.2 years; BMI = 29.2 ± 2.6 kg/m(2); mean ± SD) exercised for 40.0 ± 5.0 min at 65% of their age-predicted maximum heart rate. Relative (%) body fat was measured via DEXA scan, along with five anthropometric measurements, all of which were taken prior to and after 12 weeks. Independent sample t-tests were probed for differences, p ≤ 0.05. No statistically significant changes were determined between the groups for pre-and post-measurements. The outcomes of this study provide a foundation for future comparisons of short-duration high-intensity interval training exercise and traditional exercise, or walking, on anthropometric and body composition measurement changes in sedentary, overweight, post-menopausal females over a 12-week period. © The Author(s) 2016.

Code Glosses in Academic Writing: The Comparison of Iranian and Native Authors

Directory of Open Access Journals (Sweden)

Mahdi Dehghan

2016-01-01

Full Text Available One of the challenges of academic writing is the creation of a structurally and communicatively well-organized and coherent text. Metadiscourse enables authors of journal articles to achieve this goal by raising the writers‘ awareness about discourse features which can contribute to a better academic content production. Also, L1 background has always been a hot topic in applied linguistics and native versus non-native comparisons have been of particular interest in this field. The purpose of this study was to see whether native English speakers and Iranians use code glosses as a sub-category of metadiscourse similarly in their academic writings. To this end, the introduction section of 30 journal articles written by native and Iranian non-native English authors were investigated and the number of code-glosses in each group was counted and analyzed. Both descriptive and inferential statistics were used to answer the research question of this study. The result of data analysis revealed that there was no significant difference between the frequency count of code glosses used by Iranian and native English authors. This study can have pedagogical implications for EAP course designers as well as academic writing instructors and students.

International standard problem (ISP) No. 43 Rapid boron-dilution transient tests for code verification. Comparison report

International Nuclear Information System (INIS)

2001-03-01

established to be the average temperature of the 24 channel-centered thermocouples at the downcomer outlet. The frequency of data acquisition for code predictions was set to 2 Hz, which corresponds to the acquisition frequency of the two experimental setups. The figures of merits were expanded at the second workshop (February 2000) after experimental and computational data was collected. The revised list of figures of merit included the level average temperatures before the downcomer expansion and just above the injection cold leg. No turbulence measurements were provided. Quantitative measures of azimuthal distribution were also added to the figures of merit list: standard deviations, minima and maxima at the aforementioned levels. Furthermore, since discrepancies in flow pattern are noticeable among the tests of series A, the flow patterns obtained experimentally and from computations at 4 distinct times during the transients, were also extracted. Data were reduced into a standard format that facilitates comparisons. Ten organizations from eight countries participated in the exercise. All used computational fluid dynamics (CFD) codes to obtain predictions. Most participants used commercial software (Fluent, CFX) while some used independently developed codes (TRIO-U, PLASHY). The number of nodes used to discretize the simulation volume ranged over two orders of magnitude. The turbulence models ranged from no turbulence to renormalization group (RNG) k-epsilon. The spatial and temporal discretizations also data for first order figures of merit. Contrary to previous observations, flow patterns showed high sensitivity to buoyancy effects and the level to which temperature dependent properties and buoyancy-related turbulence effects were included in code models affected the predictions of higher order figures of merit. One more important factor needs to be considered in this discussion, namely the local refinement in regions where the flow is subject to large gradients or where

Financial and clinical governance implications of clinical coding accuracy in neurosurgery: a multidisciplinary audit.

Science.gov (United States)

Haliasos, N; Rezajooi, K; O'neill, K S; Van Dellen, J; Hudovsky, Anita; Nouraei, Sar

2010-04-01

Clinical coding is the translation of documented clinical activities during an admission to a codified language. Healthcare Resource Groupings (HRGs) are derived from coding data and are used to calculate payment to hospitals in England, Wales and Scotland and to conduct national audit and benchmarking exercises. Coding is an error-prone process and an understanding of its accuracy within neurosurgery is critical for financial, organizational and clinical governance purposes. We undertook a multidisciplinary audit of neurosurgical clinical coding accuracy. Neurosurgeons trained in coding assessed the accuracy of 386 patient episodes. Where clinicians felt a coding error was present, the case was discussed with an experienced clinical coder. Concordance between the initial coder-only clinical coding and the final clinician-coder multidisciplinary coding was assessed. At least one coding error occurred in 71/386 patients (18.4%). There were 36 diagnosis and 93 procedure errors and in 40 cases, the initial HRG changed (10.4%). Financially, this translated to pound111 revenue-loss per patient episode and projected to pound171,452 of annual loss to the department. 85% of all coding errors were due to accumulation of coding changes that occurred only once in the whole data set. Neurosurgical clinical coding is error-prone. This is financially disadvantageous and with the coding data being the source of comparisons within and between departments, coding inaccuracies paint a distorted picture of departmental activity and subspecialism in audit and benchmarking. Clinical engagement improves accuracy and is encouraged within a clinical governance framework.

Comparison of hemodynamics during hyperthermal immersion and exercise testing in apparently healthy females aged 50-60 years.

Science.gov (United States)

Lietava, Jan; Vohnout, Branislav; Valent, Denis; Celko, Juraj

2004-07-01

Owing to excessive worries regarding adverse cardiac events, hyperthermal balneotherapy for patients with coronary artery disease is underprescribed. However, very few cardiac events occur in similar heat stress during Finnish sauna bathing. Exercise testing has proven to be a safe diagnostic procedure even in survivors of myocardial infarction. We compared the effects of hyperthermal immersion and exercise testing on cardiac hemodynamics in 21 apparently healthy women aged 50-60 years. The maximal symptom-limited bicycle exercise test was performed according to the modified protocol of Wasserman. Hyperthermal immersion was carried out in 40 degrees C water and was completed by increasing the core temperature by about 2 degrees C. The left ventricular function was evaluated using continuous measurement of thoracic electric bioimpedance during both tests. The blood pressure, index of contractility and heart rate were measured directly, whereas the cardiac index, left cardiac work index and systemic vascular resistance index were calculated. The hemodynamic response, as assessed at continuous non-invasive monitoring, showed substantial differences between hyperthermal immersion and exercise testing. Overall, we found a significantly lower hemodynamic load during hyperthermal immersion in comparison with exercise testing. Entering the bath, there was a significant decrease in the left cardiac work, contractility and blood pressure. We recorded a slight increase in the heart rate towards peak hyperthermal immersion. However, other modulators such as the mean arterial pressure, index of contractility, cardiac index and left cardiac work index decreased even below resting values. Excessive hyperthermal immersion induced a lower hemodynamic load in apparently healthy women than standard maximal exercise testing.

Psacoin level 1A intercomparison probabilistic system assessment code (PSAC) user group

International Nuclear Information System (INIS)

Nies, A.; Laurens, J.M.; Galson, D.A.; Webster, S.

1990-01-01

This report describes an international code intercomparison exercise conducted by the NEA Probabilistic System Assessment Code (PSAC) User Group. The PSACOIN Level 1A exercise is the third of a series designed to contribute to the verification of probabilistic codes that may be used in assessing the safety of radioactive waste disposal systems or concepts. Level 1A is based on a more realistic system model than that used in the two previous exercises, and involves deep geological disposal concepts with a relatively complex structure of the repository vault. The report compares results and draws conclusions with regard to the use of different modelling approaches and the possible importance to safety of various processes within and around a deep geological repository. In particular, the relative significance of model uncertainty and data variability is discussed

Factor analysis for exercise stress radionuclide ventriculography

International Nuclear Information System (INIS)

Hirota, Kazuyoshi; Yasuda, Mitsutaka; Oku, Hisao; Ikuno, Yoshiyasu; Takeuchi, Kazuhide; Takeda, Tadanao; Ochi, Hironobu

1987-01-01

Using factor analysis, a new image processing in exercise stress radionuclide ventriculography, changes in factors associated with exercise were evaluated in 14 patients with angina pectoris or old myocardial infarction. The patients were imaged in the left anterior oblique projection, and three factor images were presented on a color coded scale. Abnormal factors (AF) were observed in 6 patients before exercise, 13 during exercise, and 4 after exercise. In 7 patients, the occurrence of AF was associated with exercise. Five of them became free from AF after exercise. Three patients showing AF before exercise had aggravation of AF during exercise. Overall, the occurrence or aggravation of AF was associated with exercise in ten (71 %) of the patients. The other three patients, however, had disappearance of AF during exercise. In the last patient, none of the AF was observed throughout the study. In view of a high incidence of AF associated with exercise, the factor analysis may have the potential in evaluating cardiac reverse from the viewpoint of left ventricular wall motion abnormality. (Namekawa, K.)

Exercise identity as a risk factor for exercise dependence.

Science.gov (United States)

Murray, Aja L; McKenzie, Karen; Newman, Emily; Brown, Erin

2013-05-01

dependent on exercise and exhibit symptoms indicative of a behavioural addiction to exercise according in line with clinical definitions. What does this study add? Psychological explanation for exercise dependence based on escalation of normal exercise identity processes. Empirical investigation of identity-dependence link using a sample of physically active individuals. Comparison of two alternative structures for the exercise identity construct. © 2012 The British Psychological Society.

Punjabi Sikh patients' perceived barriers to engaging in physical exercise following myocardial infarction.

Science.gov (United States)

Galdas, Paul M; Oliffe, John L; Kang, H Bindy K; Kelly, Mary T

2012-11-01

The aim of this research was to describe Punjabi Sikh patients' perceived barriers to engaging in physical exercise following myocardial infarction (MI). A qualitative, interpretive descriptive methodology was used. The sample included 15 Punjabi Sikh patients who were attending a cardiac rehabilitation education program in an urban center of British Columbia, Canada, following MI. Data were collected via semi-structured interviews and were audio recorded, translated from Punjabi to English, and transcribed verbatim. Data were analyzed using an interpretive thematic approach that involved a process of coding and constant comparison. Four key factors emerged that related to participants' perceived barriers to sustained engagement in physical activity: (1) difficulty in determining safe exertion levels independently; (2) fatigue and weakness; (3) preference for 'informal' exercise; and (4) migration-related challenges. The findings have implications for the design and delivery of health promotion strategies aimed at Punjabi Sikh patients' post-MI that is contingent on the use of 'formal' exercise settings to promote regular physical activity. The willingness among Punjabi Sikh patients to practise brisk walking offers a positive direction that public health nurses and other healthcare professionals may want to capitalize on in the delivery of exercise-related health promotion. © 2012 Wiley Periodicals, Inc.

Cross-verification of the GENE and XGC codes in preparation for their coupling

Science.gov (United States)

Jenko, Frank; Merlo, Gabriele; Bhattacharjee, Amitava; Chang, Cs; Dominski, Julien; Ku, Seunghoe; Parker, Scott; Lanti, Emmanuel

2017-10-01

A high-fidelity Whole Device Model (WDM) of a magnetically confined plasma is a crucial tool for planning and optimizing the design of future fusion reactors, including ITER. Aiming at building such a tool, in the framework of the Exascale Computing Project (ECP) the two existing gyrokinetic codes GENE (Eulerian delta-f) and XGC (PIC full-f) will be coupled, thus enabling to carry out first principle kinetic WDM simulations. In preparation for this ultimate goal, a benchmark between the two codes is carried out looking at ITG modes in the adiabatic electron limit. This verification exercise is also joined by the global Lagrangian PIC code ORB5. Linear and nonlinear comparisons have been carried out, neglecting for simplicity collisions and sources. A very good agreement is recovered on frequency, growth rate and mode structure of linear modes. A similarly excellent agreement is also observed comparing the evolution of the heat flux and of the background temperature profile during nonlinear simulations. Work supported by the US DOE under the Exascale Computing Project (17-SC-20-SC).

The impact of exercise performance dissatisfaction and physical exercise on symptoms of depression among college students: a gender comparison.

Science.gov (United States)

Edman, Jeanne L; Lynch, Wesley C; Yates, Alayne

2014-01-01

Depression is a common psychological problem and females have been found to be at greater risk for this disorder than males. Although numerous studies have found that physical exercise is negatively associated with risk of depression, some studies suggest that negative exercise attitudes may increase the risk of depression. The present study used the survey method to examine the relationship between depressive symptoms, exercise performance dissatisfaction, body dissatisfaction, and physical exercise among a sample of 895 undergraduate university students. Females reported higher depression and exercise performance dissatisfaction scores than males; however, there were no gender differences in body dissatisfaction. Exercise performance dissatisfaction was positively associated with depression among both males and females. Physical exercise was negatively associated with depression among males, but not among females. The possibility of screening participants enrolled in exercise programs for performance dissatisfaction is discussed as negative exercise attitudes may diminish the positive impact of exercise on depressed mood.

Comparison of European codes and standards on the welding of LMFBR components and proposals for their harmonization

International Nuclear Information System (INIS)

Koehler, S.

1992-01-01

A comparative study has been conducted, within the framework of the exercises of comparisons of specifications and standards for fast reactors in the following specialized fields: - welding supervisor, welder; - welder's tests; -production test specimens of welds; - measures to prevent mistakes with weld material. The relevant specifications were forwarded by the national delegations: Germany, France, Italy and United Kingdom. The comparison has been presented in tabular form where rules for a particular sub-group of specialized field are laid down in the standards of at least two Member States. In each case, the conclusions and requirements set out in the national standards have been compared in relation to a specific comparison criterion. The quantitative comparisons of the requirements laid down in the individual national standards are assessed from the following standpoints: a) points of agreement between the regulations in the standards of all four Member states (Germany, France, United Kingdom and Italy); b) significant differences between the regulations. 13 tabs

Comparison of computer codes relative to the aerosol behavior in the reactor containment building during severe core damage accidents in a PWR

International Nuclear Information System (INIS)

Fermandjian, J.; Dunbar, I.; Gauvain, J.; Ricchena, R.

1986-02-01

The present study concerns a comparative exercise, performed within the framework of the Commission of the European Communities, of the computer codes (AEROSISM-M, UK; AEROSOLS/BI, France; CORRAL-2, CEC and NAUA Mod5, Germany) used in order to assess the aerosol behavior in the reactor containment building during severe core damage accidents in a PWR

COMPARISON OF EFFECTS OF ABDOMINAL STRETCHING EXERCISE AND COLD COMPRESS THERAPY ON MENSTRUAL PAIN INTENSITY IN TEENAGE GIRLS

Directory of Open Access Journals (Sweden)

Desta Ayu Cahya Rosyida

2017-07-01

Full Text Available Background: Pain during menstruation is not uncommon, especially in young women, which has an impact on their life activities. Objective: To examine the effect of abdominal stretching exercise and cold compress therapy on decreasing intensity of menstrual pain in teenage girls at SMK Bakti Indonesia Medika. Design: A Quasy Experimental Study with two group comparison pretest-postest design. There were 46 respondents selected in this study by consecutive sampling that consisted of 23 samples in the abdominal stretching exercise group and 23 samples in the cold compress group. The menstrual pain was measured using VAS (visual analog scale. Data were analyzed using Mann-Whitney, Chi-Square, and Wilcoxon test. Results: Findings showed that the mean of menstrual pain before intervention in the abdominal stretching exercise was 7.04 and in the cold compress therapy was 6.74 with p-value 0.211 (<0.05, which indicated that there was no mean difference of pain between both groups. However, after intervention, the menstrual pain was reduced from 7.04 to 1.91 (5.09 difference in the abdominal stretching exercise group; and from 6.74 to 5.52 (1.22 difference in the cold compress group with p-value 0.000 (<0.05, which indicated that there was statistically significant difference of menstrual pain before and after intervention, both abdominal stretching exercise and cold compress therapy. Conclusion: There were statistically significant effects of abdominal stretching exercise and cold compress therapy on menstrual pain in teenage girls. The abdominal stretching exercise is more effective than cold compress therapy in reducing menstrual pain intensity. Thus, it is suggested that abdominal stretching exercise can be an alternative choice of management of dysmenorrhea in teenage girls, and can be a part of subject in the education as non-pharmacological medicine.

ARN results in interlaboratory comparison exercises

International Nuclear Information System (INIS)

Equillor, Hugo; Lewis, Cecilia; Fernandez, Jorge; Canoba, Analia; Gavini, Ricardo; Grinman, Ana; Palacios, Miguel; Sartori, Francisco; Giustina, Daniel; Gnoni, Gabriela; Czerniczyniec, Mariela; Cialella, Hugo; Acosta, Soledad; Diodati, Jorge; Bonino, Nestor; Campos, Juan; Mondini, Julia; Franco, Graciela

2008-01-01

For years, the Nuclear Regulatory Authority (ARN) has been involved in several laboratory intercomparison programmes. The objective of participating in these exercises is to assure the quality of the determinations that the radiochemical laboratories of ARN carries out as part of its regulatory activity. Most of these determinations are related to its environmental monitoring program in the vicinity of nuclear and radioactive facilities existing in the country, in operation or not. Other determinations are related with effluent samples and monitoring activities performed inside the facilities. On the other hand, these intercomparisons are part of the requirements for the laboratories under ISO 17025. ARN laboratories are in process to obtain or maintain ISO 17025 accreditation as a priority objective. During the development of the intercomparisons, different samples have been tested in several matrices containing alpha, beta and gamma emitters. These exercises were organized by different laboratories as the IAEA, the EML and NIST from United States, the NPL and the NRPB from England, the BFS from Germany, and so on. The results were very satisfactory not only in direct measurements (gamma spectrometry) but also in those that require a previous intensive laboratory processing (alpha spectrometry and liquid scintillation), resulting in many cases better than the general average. This paper provides a summary of the results obtained in these exercises and the results are compared with the overall average of the participating laboratories. (author)

Meta-analysis: aerobic exercise for the treatment of anxiety disorders.

Science.gov (United States)

Bartley, Christine A; Hay, Madeleine; Bloch, Michael H

2013-08-01

This meta-analysis investigates the efficacy of exercise as a treatment for DSM-IV diagnosed anxiety disorders. We searched PubMED and PsycINFO for randomized, controlled trials comparing the anxiolytic effects of aerobic exercise to other treatment conditions for DSM-IV defined anxiety disorders. Seven trials were included in the final analysis, totaling 407 subjects. The control conditions included non-aerobic exercise, waitlist/placebo, cognitive-behavioral therapy, psychoeducation and meditation. A fixed-effects model was used to calculate the standardized mean difference of change in anxiety rating scale scores of aerobic exercise compared to control conditions. Subgroup analyses were performed to examine the effects of (1) comparison condition; (2) whether comparison condition controlled for time spent exercising and (3) diagnostic indication. Aerobic exercise demonstrated no significant effect for the treatment of anxiety disorders (SMD=0.02 (95%CI: -0.20-0.24), z = 0.2, p = 0.85). There was significant heterogeneity between trials (χ(2) test for heterogeneity = 22.7, df = 6, p = 0.001). The reported effect size of aerobic exercise was highly influenced by the type of control condition. Trials utilizing waitlist/placebo controls and trials that did not control for exercise time reported large effects of aerobic exercise while other trials report no effect of aerobic exercise. Current evidence does not support the use of aerobic exercise as an effective treatment for anxiety disorders as compared to the control conditions. This remains true when controlling for length of exercise sessions and type of anxiety disorder. Future studies evaluating the efficacy of aerobic exercise should employ larger sample sizes and utilize comparison interventions that control for exercise time. Copyright © 2013. Published by Elsevier Inc.

Comparison report of open calculations for ATLAS Domestic Standard Problem (DSP 02)

International Nuclear Information System (INIS)

Choi, Ki Yong; Kim, Y. S.; Kang, K. H.; Cho, S.; Park, H. S.; Choi, N. H.; Kim, B. D.; Min, K. H.; Park, J. K.; Chun, H. G.; Yu, Xin Guo; Kim, H. T.; Song, C. H.; Sim, S. K.; Jeon, S. S.; Kim, S. Y.; Kang, D. G.; Choi, T. S.; Kim, Y. M.; Lim, S. G.; Kim, H. S.; Kang, D. H.; Lee, G. H.; Jang, M. J.

2012-09-01

KAERI (Korea Atomic Energy Research Institute) has been operating an integral effect test facility, the Advanced Thermal Hydraulic Test Loop for Accident Simulation (ATLAS) for transient and accident simulations of advanced pressurized water reactors (PWRs). By using the ATLAS, a high quality integral effect test database has been established for major design basis accidents of the APR1400. A Domestic Standard Problem (DSP) exercise using the ATLAS database was promoted in order to transfer the database to domestic nuclear industries and to contribute to improving safety analysis methodology for PWRs. This 2nd ATLAS DSP exercise was led by KAERI in collaboration with KINS since the successful completion of the 1st ATLAS DSP in 2009. This exercise aims at effective utilization of integral effect database obtained from the ATLAS, establishment of cooperation framework among the domestic nuclear industry, better understanding of thermal hydraulic phenomena, and investigation of the possible limitation of the existing best estimate safety analysis codes. A small break loss of coolant accident of 6 inch break at the cold leg was determined as a target scenario by considering its technical importance and by incorporating with interests from participants. Twelve domestic organizations joined this DSP 02 exercise. Finally, eleven out of the joined organizations submitted their calculation results, including universities, government, and nuclear industries. This DSP exercise was performed in an open calculation environment where the integral effect test data was open to participants prior to code calculations. This report includes all information of the 2nd ATLAS DSP (DSP 02) exercise as well as comparison results between the calculations and the experimental data

Squat Biomechanical Modeling Results from Exercising on the Hybrid Ultimate Lifting Kit

Science.gov (United States)

Gallo, Christopher A.; Thompson, William K.; Lewandowski, Beth E.; Jagodnik, Kathleen M.

2016-01-01

Long duration space travel will expose astronauts to extended periods of reduced gravity. Since gravity is not present to aid loading, astronauts will use resistive and aerobic exercise regimes for the duration of the space flight to minimize loss of bone density, muscle mass and aerobic capacity that occurs during exposure to a reduced gravity environment. Unlike the International Space Station (ISS), the area available for an exercise device in the next generation of spacecraft is limited and therefore compact resistance exercise device prototypes are being developed. The Advanced Resistive Exercise Device (ARED) currently on the ISS is being used as a benchmark for the functional performance of these new devices. Biomechanical data collection and computational modeling aid the device design process by quantifying the joint torques and the musculoskeletal forces that occur during exercises performed on the prototype devices. The computational models currently under development utilize the OpenSim software, an open source code for musculoskeletal modeling, with biomechanical input data from test subjects for estimation of muscle and joint loads. The subjects are instrumented with reflective markers for motion capture data collection while exercising on the Hybrid Ultimate Lifting Kit (HULK) prototype device. Ground reaction force data is collected with force plates under the feet and device loading is recorded through load cells internal to the HULK. Test variables include applied device load, narrow or wide foot stance, slow or fast cadence and the harness or long bar interface between the test subject and the device. Data is also obtained using free weights for a comparison to the resistively loaded exercise device. This data is input into the OpenSim biomechanical model, which has been scaled to match the anthropometrics of the test subject, to calculate the body loads. The focus of this presentation is to summarize the results from the full squat exercises

Analysis of SCARABEE BE+3 experiment with ASTEC-Na and comparison with other SFR safety analysis codes

International Nuclear Information System (INIS)

Bandini, Giacomino; Ederli, Stefano; Perez-Martin, Sara; Pfrang, Werner; Girault, Nathalie; Cloarec, Laure

2017-01-01

The ASTEC-Na code was further developed and assessed in the frame of JASMIN project of the 7th EU Framework Program to extend the original capability of ASTEC, dealing with severe accident analysis in LWR to Sodium-cooled Fast Reactors (SFR). The in-pile BE+3 experiment from the SCARABEE-N program has been simulated with ASTEC-Na for thermal-hydraulic models validation purpose. The adequacy of ASTEC-Na thermal-hydraulic models has been also investigated through the comparison with other safety analysis codes. The analysis of SCARABEE BE+3 test confirms the good performance of ASTEC-Na code in the calculation of single-phase conditions and boiling onset, while larger deviations are encountered in the analysis of the two-phase conditions, mainly regarding the propagation of the boiling front. Furthermore, reasonable agreement was found with other code results. (author)

Perceived exercise barriers, enablers, and benefits among exercising and nonexercising adults with arthritis: results from a qualitative study.

Science.gov (United States)

Wilcox, Sara; Der Ananian, Cheryl; Abbott, Jill; Vrazel, JoEllen; Ramsey, Cornelia; Sharpe, Patricia A; Brady, Teresa

2006-08-15

Rates of participation in regular exercise are lower among individuals with arthritis than those without arthritis. This study examined perceived exercise barriers, benefits, and enablers in exercising and nonexercising adults with arthritis. Twelve focus groups were conducted with 68 adults with arthritis. Groups were segmented by exercise status, socioeconomic status, and race. Focus group discussions were transcribed verbatim and coded. NVivo software was used to extract themes for exercisers and nonexercisers. A wide range of physical, psychological, social, and environmental factors were perceived to influence exercise. Some of these factors were similar to those in general adult samples, whereas others were unique to individuals with chronic disease. Symptoms of arthritis were barriers to exercise, yet improvements in these outcomes were also seen as potential benefits of and motivations for exercise. Exercisers had experienced these benefits and were more likely to have adapted their exercise to accommodate the disease, whereas nonexercisers desired these benefits and were more likely to have stopped exercising since developing arthritis. Health care providers' advice to exercise and the availability of arthritis-specific programs were identified as needs. This study has implications for how to market exercise to individuals with arthritis and how communities and health care professionals can facilitate the uptake of exercise. These implications are discussed.

Comparison of Effectiveness of Supervised Exercise Program and Cyriax Physiotherapy in Patients with Tennis Elbow (Lateral Epicondylitis: A Randomized Clinical Trial

Directory of Open Access Journals (Sweden)

Rajadurai Viswas

2012-01-01

Full Text Available Objective. To compare the effectiveness of supervised exercise program and Cyriax physiotherapy in the treatment of tennis elbow (lateral epicondylitis. Design. Randomized clinical trial. Setting. Physiotherapy and rehabilitation centre. Subjects. This study was carried out with 20 patients, who had tennis elbow (lateral epicondylitis. Intervention. Group A (=10 had received supervised exercise program. Group B (=10 was treated with Cyriax physiotherapy. All patients received three treatment sessions per week for four weeks (12 treatment sessions. Outcome measures. Pain was evaluated using a visual analogue scale (VAS, and functional status was evaluated by completion of the Tennis Elbow Function Scale (TEFS which were recorded at base line and at the end of fourth week. Results. Both the supervised exercise program and Cyriax physiotherapy were found to be significantly effective in reduction of pain and in the improvement of functional status. The supervised exercise programme resulted in greater improvement in comparison to those who received Cyriax physiotherapy. Conclusion. The results of this clinical trial demonstrate that the supervised exercise program may be the first treatment choice for therapist in managing tennis elbow.

Kinetic Analysis of Horizontal Plyometric Exercise Intensity.

Science.gov (United States)

Kossow, Andrew J; Ebben, William P

2018-05-01

Kossow, AJ, DeChiara, TG, Neahous, SM, and Ebben, WP. Kinetic analysis of horizontal plyometric exercise intensity. J Strength Cond Res 32(5): 1222-1229, 2018-Plyometric exercises are frequently performed as part of a strength and conditioning program. Most studies assessed the kinetics of plyometric exercises primarily performed in the vertical plane. The purpose of this study was to evaluate the multiplanar kinetic characteristics of a variety of plyometric exercises, which have a significant horizontal component. This study also sought to assess sex differences in the intensity progression of these exercises. Ten men and 10 women served as subjects. The subjects performed a variety of plyometric exercises including the double-leg hop, standing long jump, single-leg standing long jump, bounding, skipping, power skipping, cone hops, and 45.72-cm hurdle hops. Subjects also performed the countermovement jump for comparison. All plyometric exercises were evaluated using a force platform. Dependent variables included the landing rate of force development and landing ground reaction forces for each exercise in the vertical, frontal, and sagittal planes. A 2-way mixed analysis of variance with repeated-measures for plyometric exercise type demonstrated main effects for exercise type for all dependent variables (p ≤ 0.001). There was no significant interaction between plyometric exercise type and sex for any of the variable assessed. Bonferroni-adjusted pairwise comparisons identified a number of differences between the plyometric exercises for the dependent variables assessed (p ≤ 0.05). These findings should be used to guide practitioners in the progression of plyometric exercise intensity, and thus program design, for those who require significant horizontal power in their sport.

Low-temperature plasma simulations with the LSP PIC code

Science.gov (United States)

Carlsson, Johan; Khrabrov, Alex; Kaganovich, Igor; Keating, David; Selezneva, Svetlana; Sommerer, Timothy

2014-10-01

The LSP (Large-Scale Plasma) PIC-MCC code has been used to simulate several low-temperature plasma configurations, including a gas switch for high-power AC/DC conversion, a glow discharge and a Hall thruster. Simulation results will be presented with an emphasis on code comparison and validation against experiment. High-voltage, direct-current (HVDC) power transmission is becoming more common as it can reduce construction costs and power losses. Solid-state power-electronics devices are presently used, but it has been proposed that gas switches could become a compact, less costly, alternative. A gas-switch conversion device would be based on a glow discharge, with a magnetically insulated cold cathode. Its operation is similar to that of a sputtering magnetron, but with much higher pressure (0.1 to 0.3 Torr) in order to achieve high current density. We have performed 1D (axial) and 2D (axial/radial) simulations of such a gas switch using LSP. The 1D results were compared with results from the EDIPIC code. To test and compare the collision models used by the LSP and EDIPIC codes in more detail, a validation exercise was performed for the cathode fall of a glow discharge. We will also present some 2D (radial/azimuthal) LSP simulations of a Hall thruster. The information, data, or work presented herein was funded in part by the Advanced Research Projects Agency-Energy (ARPA-E), U.S. Department of Energy, under Award Number DE-AR0000298.

Analysis of CSNI benchmark test on containment using the code CONTRAN

International Nuclear Information System (INIS)

Haware, S.K.; Ghosh, A.K.; Raj, V.V.; Kakodkar, A.

1994-01-01

A programme of experimental as well as analytical studies on the behaviour of nuclear reactor containment is being actively pursued. A large number ol' experiments on pressure and temperature transients have been carried out on a one-tenth scale model vapour suppression pool containment experimental facility, simulating the 220 MWe Indian Pressurised Heavy Water Reactors. A programme of development of computer codes is underway to enable prediction of containment behaviour under accident conditions. This includes codes for pressure and temperature transients, hydrogen behaviour, aerosol behaviour etc. As a part of this ongoing work, the code CONTRAN (CONtainment TRansient ANalysis) has been developed for predicting the thermal hydraulic transients in a multicompartment containment. For the assessment of the hydrogen behaviour, the models for hydrogen transportation in a multicompartment configuration and hydrogen combustion have been incorporated in the code CONTRAN. The code also has models for the heat and mass transfer due to condensation and convection heat transfer. The structural heat transfer is modeled using the one-dimensional transient heat conduction equation. Extensive validation exercises have been carried out with the code CONTRAN. The code CONTRAN has been successfully used for the analysis of the benchmark test devised by Committee on the Safety of Nuclear Installations (CSNI) of the Organisation for Economic Cooperation and Development (OECD), to test the numerical accuracy and convergence errors in the computation of mass and energy conservation for the fluid and in the computation of heat conduction in structural walls. The salient features of the code CONTRAN, description of the CSNI benchmark test and a comparison of the CONTRAN predictions with the benchmark test results are presented and discussed in the paper. (author)

Measurement of exercise habits and prediction of leisure-time activity in established exercise.

Science.gov (United States)

Tappe, Karyn A; Glanz, Karen

2013-01-01

Habit formation may be important to maintaining repetitive healthy behaviors like exercise. Existing habit questionnaires only measure part of the definition of habit (automaticity; frequency). A novel habit questionnaire was evaluated that measured contextual cueing. We designed a two-stage observational cohort study of regular exercisers. For stage 1, we conducted an in-person interview on a university campus. For stage 2, we conducted an internet-based survey. Participants were 156 adults exercising at least once per week. A novel measure, The Exercise Habit Survey (EHS) assessed contextual cueing through 13 questions on constancy of place, time, people, and exercise behaviors. A subset of the Self-Report Habit Index (SRHI), measuring automaticity, was also collected along with measures of intention and self-efficacy, and the International Physical Activity Questionnaire (IPAQ), leisure-time section. The EHS was evaluated using factor analysis and test-retest reliability. Its correlation to other exercise predictors and exercise behavior was evaluated using Pearson's r and hierarchical regression. Results suggested that the EHS comprised four subscales (People, Place, Time, Exercise Constancy). Only Exercise Constancy correlated significantly with SRHI. Only the People subscale predicted IPAQ exercise metabolic equivalents. The SRHI was a strong predictor. Contextual cueing is an important aspect of habit but measurement methodologies warrant refinement and comparison by different methods.

Comparison of the thermal neutron scattering treatment in MCNP6 and GEANT4 codes

Science.gov (United States)

Tran, H. N.; Marchix, A.; Letourneau, A.; Darpentigny, J.; Menelle, A.; Ott, F.; Schwindling, J.; Chauvin, N.

2018-06-01

To ensure the reliability of simulation tools, verification and comparison should be made regularly. This paper describes the work performed in order to compare the neutron transport treatment in MCNP6.1 and GEANT4-10.3 in the thermal energy range. This work focuses on the thermal neutron scattering processes for several potential materials which would be involved in the neutron source designs of Compact Accelerator-based Neutrons Sources (CANS), such as beryllium metal, beryllium oxide, polyethylene, graphite, para-hydrogen, light water, heavy water, aluminium and iron. Both thermal scattering law and free gas model, coming from the evaluated data library ENDF/B-VII, were considered. It was observed that the GEANT4.10.03-patch2 version was not able to account properly the coherent elastic process occurring in crystal lattice. This bug is treated in this work and it should be included in the next release of the code. Cross section sampling and integral tests have been performed for both simulation codes showing a fair agreement between the two codes for most of the materials except for iron and aluminium.

Comparison calculations of WWER-1000 fuel assemblies by using the MCNP 4.2 a KASSETA codes

International Nuclear Information System (INIS)

Trgina, M.

1993-12-01

The power multiplication and distribution factors are compared for various geometries and material configurations of WWER-1000 fuel assemblies. The calculations were performed in 2 ways: (i) using nuclear data, employing older and current data collections, and (ii) using the author's own model based on the KASSETA code. The comparison code MCNP 4.2 is described, intended for computerized simulation of the transport of neutrons, photons and electrons. This code uses its own cross section library. The methodology is outlined and a specification of the Monte Carlo method employed is given. The use of the refined data library gave rise to appreciable deviations of the multiplication factors in all variants. The use of the older data library led to identical criticality results for the variant with water holes. For inserted absorbers the discrepancies in criticality and in power distribution data are appreciable. The marked disagreement between the results of application of the MCNP 4.2 and KASSETA codes for the variants with inserted control elements is indicative of inappropriateness of the approximation procedure in the latter code. (J.B.). 2 tabs., 11 figs., 11 refs

An increase in the number of admitted patients with exercise-induced rhabdomyolysis.

Science.gov (United States)

Aalborg, Christian; Rød-Larsen, Cecilie; Leiro, Ingjerd; Aasebø, Willy

2016-10-01

Rhabdomyolysis may lead to serious complications, and treatment is both time-consuming and costly. The condition can be caused by many factors, including intense exercise. The purpose of this study was to investigate whether the number of hospitalisations due to exercise-induced rhabdomyolysis has changed in recent years. We describe the disease course in hospitalised patients, and compare disease course in individuals with exercise-induced rhabdomyolysis and rhabdomyolysis due to other causes. The study is a systematic review of medical records from Akershus University Hospital for the years 2008 and 2011 – 14. All hospitalised patients with diagnostic codes M62.8, M62.9 and T79.6 and creatine kinase levels > 5 000 IU/l were included. The cause of the rhabdomyolysis was recorded in addition to patient characteristics and the results of various laboratory tests. Of 161 patients who were hospitalised with rhabdomyolysis during the study period, 44 cases (27  %) were classified as exercise-induced. In 2008 there were no admissions due to exercise-induced rhabdomyolysis; in 2011 and 2012 there were six and four admissions respectively, while in 2014 there were 22. This gives an estimated incidence of 0.8/100 000 in 2012 and 4.6/100 000 in 2014. Strength-training was the cause of hospitalisation in 35 patients (80  % of the exercise-induced cases). Three patients (7  % of the exercise-induced cases) had transient stage 1 kidney injury, but there were no cases with stage 2 or stage 3 injury. By comparison, 52  % of patients with rhabdomyolysis due to another cause had kidney injury, of which 28  % was stage 2 or 3. The number of persons hospitalised with exercise-induced rhabdomyolysis has increased four-fold from 2011 to 2014, possibly due to changes in exercise habits in the population. None of the patients with exercise-induced rhabdomyolysis had serological signs of kidney injury upon hospital discharge.

A comparison of 2 circuit exercise training techniques for eliciting matched metabolic responses in persons with paraplegia.

Science.gov (United States)

Nash, Mark S; Jacobs, Patrick L; Woods, Jeffrey M; Clark, James E; Pray, Tanya A; Pumarejo, Alex E

2002-02-01

To test whether acute metabolic (VO(2)), chronotropic (heart rate), and perceptual (rating of perceived exertion; RPE) responses to exercise by persons with paraplegia differ when the exercise is on a multistation isoinertial exercise system (MultiGym) or on a customized system of Thera-Band resistance bands (ElasticGym). Within-subjects comparison of 2 treatments. Academic medical center. Sixteen men and 1 woman with complete paraplegia (T4-L1), as defined by the American Spinal Injury Association. A circuit resistance training (CRT) program for persons with paraplegia was adapted to both a MultiGym and a customized ElasticGym. Exercises used for training and testing used 6 resistance maneuvers at 50% of the 1-repetition maximum (1-RM), with interposed rapid arm spinning. Subjects were habituated to both conditions for 2 weeks before testing on randomized nonconsecutive days. VO(2) (L/min) was measured by portable spirometry, heart rate (beats/min) by a chest strap monitor, and RPE by the Borg Scale of Perceived Exertion (6-20). No significant effects of test condition on average VO(2) or heart rate were observed, with differences between conditions reflecting only .08L/min and 6.4 beats/min, respectively. Average RPE was significantly higher in testing under the ElasticGym condition (P < .05). CRT on a customized ElasticGym system elicited acute metabolic and chronotropic responses that did not differ from responses to exercise on a MultiGym, though RPE was greater with the ElasticGym. Copyright 2002 by the American Congress of Rehabilitation Medicine and the American Academy of Physical Medicine and Rehabilitation

Comparison of the THYC and FLICA-3M codes by the pseudo-cubic thin-plate method

International Nuclear Information System (INIS)

Banner, D.; Crecy, F. de.

1993-06-01

The pseudo cubic Spline method (PCSM) is a statistical tool developed by the CEA. It is designed to analyse experimental points and in particular thermalhydraulic data. Predictors of the occurrence of critical heat flux are obtained by using Spline functions. In this paper, predictors have been computed from the same CHF databases by using two different flow analyses to derive local thermal-hydraulic variables at the CHF location. In fact, CEA's FLICA-3M represents rod bundles by interconnected subchannels whereas EDF's THYC code uses a porous 3D approach. In a first step, the PCSM is briefly presented as well as the two codes studied here. Then, the comparison methodology is explained in order to prove that advanced analysis of thermalhydraulic codes can be achieved with the PCSM. (authors). 6 figs., 2 tabs., 5 refs

Multimedia signal coding and transmission

CERN Document Server

Ohm, Jens-Rainer

2015-01-01

This textbook covers the theoretical background of one- and multidimensional signal processing, statistical analysis and modelling, coding and information theory with regard to the principles and design of image, video and audio compression systems. The theoretical concepts are augmented by practical examples of algorithms for multimedia signal coding technology, and related transmission aspects. On this basis, principles behind multimedia coding standards, including most recent developments like High Efficiency Video Coding, can be well understood. Furthermore, potential advances in future development are pointed out. Numerous figures and examples help to illustrate the concepts covered. The book was developed on the basis of a graduate-level university course, and most chapters are supplemented by exercises. The book is also a self-contained introduction both for researchers and developers of multimedia compression systems in industry.

Post-test sensitivity analysis of OECD/CSNI ISP42 panda experiment by Relap5 code

International Nuclear Information System (INIS)

Zanocco, P.; D'Auria, F.; Galassi, G.M.

2001-01-01

The present document deals with Relap5/Mod3.2 analysis of the International Standard Problem (ISP-42) exercise performed in PANDA facility on April 21-22, 1998. PANDA is installed at PSI (Paul Scherrer Institute). PANDA is a large-scale thermal-hydraulic test facility suitable for the simulation of passive containment for Advanced Light Water Reactors (ALWR). The work focuses phase A of the ISP-42 experiment, including the break in the main steam line, and the Passive Containment Cooling System Start-Up. The objective is to investigate the start-up phenomenology of passive cooling system when steam is injected into cold vessel filled with air and to observe the resulting system behavior. A detailed nodalization was set-up at the University of Pisa, in order to model 3-D flow paths with a 1-D code. The comparison between pre-test predictions and experimental data is discussed. Overall time behavior is reasonably well predicted, showing a rather good and robust overall code behavior in the simulation of the global test scenario. The results of a preliminary post-test analysis are discussed, including the comparison with the experimental data. (authors)

Strength training alone, exercise therapy alone, and exercise therapy with passive manual mobilisation each reduce pain and disability in people with knee osteoarthritis: a systematic review.

Science.gov (United States)

Jansen, Mariette J; Viechtbauer, Wolfgang; Lenssen, Antoine F; Hendriks, Erik J M; de Bie, Rob A

2011-01-01

What are the effects of strength training alone, exercise therapy alone, and exercise with additional passive manual mobilisation on pain and function in people with knee osteoarthritis compared to control? What are the effects of these interventions relative to each other? A meta-analysis of randomised controlled trials. Adults with osteoarthritis of the knee. INTERVENTION TYPES: Strength training alone, exercise therapy alone (combination of strength training with active range of motion exercises and aerobic activity), or exercise with additional passive manual mobilisation, versus any non-exercise control. Comparisons between the three interventions were also sought. The primary outcome measures were pain and physical function. 12 trials compared one of the interventions against control. The effect size on pain was 0.38 (95% CI 0.23 to 0.54) for strength training, 0.34 (95% CI 0.19 to 0.49) for exercise, and 0.69 (95% CI 0.42 to 0.96) for exercise plus manual mobilisation. Each intervention also improved physical function significantly. No randomised comparisons of the three interventions were identified. However, meta-regression indicated that exercise plus manual mobilisations improved pain significantly more than exercise alone (p = 0.03). The remaining comparisons between the three interventions for pain and physical function were not significant. Exercise therapy plus manual mobilisation showed a moderate effect size on pain compared to the small effect sizes for strength training or exercise therapy alone. To achieve better pain relief in patients with knee osteoarthritis physiotherapists or manual therapists might consider adding manual mobilisation to optimise supervised active exercise programs. Copyright © 2011 Australian Physiotherapy Association. Published by .. All rights reserved.

The PSACOIN level 1B exercise: A probabilistic code intercomparison involving a four compartment biosphere model

International Nuclear Information System (INIS)

Klos, R.A.; Sinclair, J.E.; Torres, C.; Mobbs, S.F.; Galson, D.A.

1991-01-01

The probabilistic Systems Assessment Code (PSAC) User Group of the OECD Nuclear Energy Agency has organised a series of code intercomparison studies of relevance to the performance assessment of underground repositories for radioactive wastes - known collectively by the name PSACOIN. The latest of these to be undertaken is designated PSACOIN Level 1b, and the case specification provides a complete assessment model of the behaviour of radionuclides following release into the biosphere. PSACOIN Level 1b differs from other biosphere oriented intercomparison exercises in that individual dose is the end point of the calculations as opposed to any other intermediate quantity. The PSACOIN Level 1b case specification describes a simple source term which is used to simulate the release of activity to the biosphere from certain types of near surface waste repository, the transport of radionuclides through the biosphere and their eventual uptake by humankind. The biosphere sub model comprises 4 compartments representing top and deep soil layers, river water and river sediment. The transport of radionuclides between the physical compartments is described by ten transfer coefficients and doses to humankind arise from the simultaneous consumption of water, fish, meat, milk, and grain as well as from dust inhalation and external γ-irradiation. The parameters of the exposure pathway sub model are chosen to be representative of an individual living in a small agrarian community. (13 refs., 3 figs., 2 tabs.)

Multivariate statistics exercises and solutions

CERN Document Server

Härdle, Wolfgang Karl

2015-01-01

The authors present tools and concepts of multivariate data analysis by means of exercises and their solutions. The first part is devoted to graphical techniques. The second part deals with multivariate random variables and presents the derivation of estimators and tests for various practical situations. The last part introduces a wide variety of exercises in applied multivariate data analysis. The book demonstrates the application of simple calculus and basic multivariate methods in real life situations. It contains altogether more than 250 solved exercises which can assist a university teacher in setting up a modern multivariate analysis course. All computer-based exercises are available in the R language. All R codes and data sets may be downloaded via the quantlet download center  www.quantlet.org or via the Springer webpage. For interactive display of low-dimensional projections of a multivariate data set, we recommend GGobi.

Comparison of exercise electrocardiography and stress perfusion CMR for the detection of coronary artery disease in women

Directory of Open Access Journals (Sweden)

Greulich Simon

2012-06-01

Full Text Available Abstract Background Exercise electrocardiography (ECG is frequently used in the work-up of patients with suspected coronary artery disease (CAD, however the accuracy is reduced in women. Cardiovascular magnetic resonance (CMR stress testing can accurately diagnose CAD in women. To date, a direct comparison of CMR to ECG has not been performed. Methods and results We prospectively enrolled 88 consecutive women with chest pain or other symptoms suggestive of CAD. Patients underwent a comprehensive clinical evaluation, exercise ECG, a CMR stress test including perfusion and infarct imaging, and x-ray coronary angiography (CA within 24 hours. CAD was defined as stenosis ≥70% on quantitative analysis of CA. Exercise ECG, CMR and CA was completed in 68 females (age 66.4 ± 8.8 years, number of CAD risk factors 3.5 ± 1.4. The prevalence of CAD on CA was 29%. The Duke treadmill score (DTS in the entire group was −3.0 ± 5.4 and was similar in those with and without CAD (−4.5 ± 5.8 and −2.4 ± 5.1; P = 0.12. Sensitivity, specificity and accuracy for CAD diagnosis was higher for CMR compared with exercise ECG (sensitivities 85% and 50%, P = 0.02, specificities 94% and 73%, P = 0.01, and accuracies 91% and 66%, P = 0.0007, respectively. Even after applying the DTS the accuracy of CMR was higher compared to exercise ECG (area under ROC curve 0.94 ± 0.03 vs 0.56 ± 0.07; P = 0.0001. Conclusions In women with intermediate-to-high risk for CAD who are able to exercise and have interpretable resting ECG, CMR stress perfusion imaging has higher accuracy for the detection of relevant obstruction of the epicardial coronaries when directly compared to exercise ECG.

Comparison of trunk kinematics in trunk training exercises and throwing.

Science.gov (United States)

Stodden, David F; Campbell, Brian M; Moyer, Todd M

2008-01-01

Strength and conditioning professionals, as well as coaches, have emphasized the importance of training the trunk and the benefits it may have on sport performance and reducing the potential for injury. However, no data on the efficacy of trunk training support such claims. The purpose of this study was to examine the maximum differential trunk rotation and maximum angular velocities of the pelvis and upper torso of participants while they performed 4 trunk exercises (seated band rotations, cross-overs, medicine ball throws, and twisters) and compare these trunk exercise kinematics with the trunk kinematics demonstrated in actual throwing performance. Nine NCAA Division I baseball players participated in this study. Each participant's trunk kinematics was analyzed while he performed 5 repetitions of each exercise in both dominant and nondominant rotational directions. Results indicated maximum differentiated rotation in all 4 trunk exercises was similar to maximum differentiated rotation (approximately 50-60 degrees) demonstrated in throwing performance. Maximum angular velocities of the pelvis and upper torso in the trunk exercises were appreciably slower (approximately 50% or less) than the angular velocities demonstrated during throwing performance. Incorporating trunk training exercises that demonstrate sufficient trunk ranges of motion and velocities into a strength and conditioning program may help to increase ball velocity and/or decrease the risk injury.

Benchmark Problems of the Geothermal Technologies Office Code Comparison Study

Energy Technology Data Exchange (ETDEWEB)

White, Mark D. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Podgorney, Robert [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Kelkar, Sharad M. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); McClure, Mark W. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Danko, George [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Ghassemi, Ahmad [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Fu, Pengcheng [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Bahrami, Davood [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Barbier, Charlotte [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Cheng, Qinglu [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Chiu, Kit-Kwan [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Detournay, Christine [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Elsworth, Derek [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Fang, Yi [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Furtney, Jason K. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Gan, Quan [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Gao, Qian [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Guo, Bin [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Hao, Yue [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Horne, Roland N. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Huang, Kai [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Im, Kyungjae [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Norbeck, Jack [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Rutqvist, Jonny [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Safari, M. R. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Sesetty, Varahanaresh [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Sonnenthal, Eric [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Tao, Qingfeng [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); White, Signe K. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Wong, Yang [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Xia, Yidong [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

2016-12-02

A diverse suite of numerical simulators is currently being applied to predict or understand the performance of enhanced geothermal systems (EGS). To build confidence and identify critical development needs for these analytical tools, the United States Department of Energy, Geothermal Technologies Office has sponsored a Code Comparison Study (GTO-CCS), with participants from universities, industry, and national laboratories. A principal objective for the study was to create a community forum for improvement and verification of numerical simulators for EGS modeling. Teams participating in the study were those representing U.S. national laboratories, universities, and industries, and each team brought unique numerical simulation capabilities to bear on the problems. Two classes of problems were developed during the study, benchmark problems and challenge problems. The benchmark problems were structured to test the ability of the collection of numerical simulators to solve various combinations of coupled thermal, hydrologic, geomechanical, and geochemical processes. This class of problems was strictly defined in terms of properties, driving forces, initial conditions, and boundary conditions. Study participants submitted solutions to problems for which their simulation tools were deemed capable or nearly capable. Some participating codes were originally developed for EGS applications whereas some others were designed for different applications but can simulate processes similar to those in EGS. Solution submissions from both were encouraged. In some cases, participants made small incremental changes to their numerical simulation codes to address specific elements of the problem, and in other cases participants submitted solutions with existing simulation tools, acknowledging the limitations of the code. The challenge problems were based on the enhanced geothermal systems research conducted at Fenton Hill, near Los Alamos, New Mexico, between 1974 and 1995. The problems

Comparison of Effectiveness of Supervised Exercise Program and Cyriax Physiotherapy in Patients with Tennis Elbow (Lateral Epicondylitis): A Randomized Clinical Trial

Science.gov (United States)

Viswas, Rajadurai; Ramachandran, Rejeeshkumar; Korde Anantkumar, Payal

2012-01-01

Objective. To compare the effectiveness of supervised exercise program and Cyriax physiotherapy in the treatment of tennis elbow (lateral epicondylitis). Design. Randomized clinical trial. Setting. Physiotherapy and rehabilitation centre. Subjects. This study was carried out with 20 patients, who had tennis elbow (lateral epicondylitis). Intervention. Group A (n = 10) had received supervised exercise program. Group B (n = 10) was treated with Cyriax physiotherapy. All patients received three treatment sessions per week for four weeks (12 treatment sessions). Outcome measures. Pain was evaluated using a visual analogue scale (VAS), and functional status was evaluated by completion of the Tennis Elbow Function Scale (TEFS) which were recorded at base line and at the end of fourth week. Results. Both the supervised exercise program and Cyriax physiotherapy were found to be significantly effective in reduction of pain and in the improvement of functional status. The supervised exercise programme resulted in greater improvement in comparison to those who received Cyriax physiotherapy. Conclusion. The results of this clinical trial demonstrate that the supervised exercise program may be the first treatment choice for therapist in managing tennis elbow. PMID:22629225

Comparison of deep and superficial abdominal muscle activity between experienced Pilates and resistance exercise instructors and controls during stabilization exercise.

Science.gov (United States)

Moon, Ji-Hyun; Hong, Sang-Min; Kim, Chang-Won; Shin, Yun-A

2015-06-01

Pilates and resistance exercises are used for lumbar stabilization training. However, it is unclear which exercise is more effective for lumbar stabilization. In our study, we aimed to compare surface muscle activity and deep muscle thickness during relaxation and spinal stabilization exercise in experienced Pilates and resistance exercise instructors. This study is a retrospective case control study set in the Exercise Prescription Laboratory and Sports Medicine Center. The participants included Pilates instructors (mean years of experience, 3.20±1.76; n=10), resistance exercise instructors (mean years of experience, 2.53±0.63; n=10), and controls (n=10). The participants performed 4 different stabilization exercises: abdominal drawing-in maneuver, bridging, roll-up, and one-leg raise. During the stabilization exercises, surface muscle activity was measured with electromyography, whereas deep muscle thickness was measured by ultrasound imaging. During the 4 stabilization exercises, the thickness of the transverse abdominis (TrA) was significantly greater in the Pilates-trained group than the other 2 other groups. The internal oblique (IO) thickness was significantly greater in the Pilates- and resistance-trained group than the control group, during the 4 exercises. However, the surface muscle activities were similar between the groups. Both Pilates and resistance exercise instructors had greater activation of deep muscles, such as the TrA and IO, than the control subjects. Pilates and resistance exercise are both effective for increasing abdominal deep muscle thickness.

Inter-comparison of Computer Codes for TRISO-based Fuel Micro-Modeling and Performance Assessment

International Nuclear Information System (INIS)

Boer, Brian; Keun Jo, Chang; Wu, Wen; Ougouag, Abderrafi M.; McEachren, Donald; Venneri, Francesco

2010-01-01

The Next Generation Nuclear Plant (NGNP), the Deep Burn Pebble Bed Reactor (DB-PBR) and the Deep Burn Prismatic Block Reactor (DB-PMR) are all based on fuels that use TRISO particles as their fundamental constituent. The TRISO particle properties include very high durability in radiation environments, hence the designs reliance on the TRISO to form the principal barrier to radioactive materials release. This durability forms the basis for the selection of this fuel type for applications such as Deep Bun (DB), which require exposures up to four times those expected for light water reactors. It follows that the study and prediction of the durability of TRISO particles must be carried as part of the safety and overall performance characterization of all the designs mentioned above. Such evaluations have been carried out independently by the performers of the DB project using independently developed codes. These codes, PASTA, PISA and COPA, incorporate models for stress analysis on the various layers of the TRISO particle (and of the intervening matrix material for some of them), model for fission products release and migration then accumulation within the SiC layer of the TRISO particle, just next to the layer, models for free oxygen and CO formation and migration to the same location, models for temperature field modeling within the various layers of the TRISO particle and models for the prediction of failure rates. All these models may be either internal to the code or external. This large number of models and the possibility of different constitutive data and model formulations and the possibility of a variety of solution techniques makes it highly unlikely that the model would give identical results in the modeling of identical situations. The purpose of this paper is to present the results of an inter-comparison between the codes and to identify areas of agreement and areas that need reconciliation. The inter-comparison has been carried out by the cooperating

Comparison of whole-body vibration exercise and plyometric exercise to improve isokinetic muscular strength, jumping performance and balance of female volleyball players.

Science.gov (United States)

Kim, Yong-Youn; Park, Si-Eun

2016-11-01

[Purpose] The purpose of this study was to assess the effect of whole-body vibration exercise and plyometric exercise on female volleyball players. [Subjects and Methods] Subjects were randomly allocated to two exercise groups (whole-body vibration exercise group and plyometric exercise group). The exercise was conducted three times each week for 8 weeks. Isokinetic muscular strength, jumping performance, and balance were measured before starting the exercise and after finishing the 8 weeks of exercise. [Results] Measurements of isokinetic muscular strength revealed that the whole-body vibration exercise group showed significant increase after the exercise. However, the plyometric exercise group had no significant increase in lumbar flexion, extension, and knee flexion. Measurements of vertical jumping revealed that, the whole-body vibration exercise group had no significant increase after the exercise. However, the plyometric exercise group showed significant increase. Measurements of balance revealed that, the whole-body vibration exercise group showed significant increase. However, the plyometric exercise group showed no significant increase. [Conclusion] Although both whole-body vibration and plyometric exercises are effective intervention methods, the two methods have different effects on the improvement of isokinetic muscular strength, jumping performance, and balance of female volleyball players.

A Comparison Among Plastic Deformation Capacities of RC Members According to International Codes

International Nuclear Information System (INIS)

Tripepi, C.; Failla, G.; Santini, A.; Nucera, F.

2008-01-01

The aim is to compare plastic deformation capacities of flexure-controlled reinforced concrete members, as predicted by the Italian Seismic Code, Eurocode 8 and FEMA356. For completeness, recent studies in the literature are also referred to. The comparison is pursued in context with a nonlinear static analysis run on 2D frame structures. This allows to assess whether and to which extent plastic deformation capacities may be affected by variations in those quantities, such as shear span and/or axial load, depending on which plastic deformation capacities are generally given

Where does HIT fit? An examination of the affective response to high-intensity intervals in comparison to continuous moderate- and continuous vigorous-intensity exercise in the exercise intensity-affect continuum.

Directory of Open Access Journals (Sweden)

Mary E Jung

Full Text Available Affect experienced during an exercise session is purported to predict future exercise behaviour. Compared to continuous moderate-intensity exercise (CMI, the affective response to continuous vigorous-intensity exercise (CVI has consistently been shown to be more aversive. The affective response, and overall tolerability to high-intensity interval training (HIT, is less studied. To date, there has yet to be a comparison between HIT, CVI, and CMI. The purpose of this study was to compare the tolerability and affective responses during HIT to CVI and CMI. This study utilized a repeated measures, randomized, counter-balanced design. Forty-four participants visited the laboratory on four occasions. Baseline fitness testing was conducted to establish peak power output in Watts (W peak. Three subsequent visits involved a single bout of a HIT, corresponding to 1-minute at ∼ 100% W peak and 1-minute at ∼ 20% W peak for 20 minutes, b CMI, corresponding to ∼ 40% W peak for 40 minutes, and c CVI, corresponding to ∼ 80% W peak for 20 minutes. The order of the sessions was randomized. Affective responses were measured before, during and after each session. Task self-efficacy, intentions, enjoyment and preference were measured after sessions. Participants reported greater enjoyment of HIT as compared to CMI and CVI, with over 50% of participants reporting a preference to engage in HIT as opposed to either CMI or CVI. HIT was considered more pleasurable than CVI after exercise, but less pleasurable than CMI at these times. Despite this participants reported being just as confident to engage in HIT as they were CMI, but less confident to engage in CVI. This study highlights the utility of HIT in inactive individuals, and suggests that it may be a viable alternative to traditionally prescribed continuous modalities of exercise for promoting self-efficacy and enjoyment of exercise.

Where does HIT fit? An examination of the affective response to high-intensity intervals in comparison to continuous moderate- and continuous vigorous-intensity exercise in the exercise intensity-affect continuum.

Science.gov (United States)

Jung, Mary E; Bourne, Jessica E; Little, Jonathan P

2014-01-01

Affect experienced during an exercise session is purported to predict future exercise behaviour. Compared to continuous moderate-intensity exercise (CMI), the affective response to continuous vigorous-intensity exercise (CVI) has consistently been shown to be more aversive. The affective response, and overall tolerability to high-intensity interval training (HIT), is less studied. To date, there has yet to be a comparison between HIT, CVI, and CMI. The purpose of this study was to compare the tolerability and affective responses during HIT to CVI and CMI. This study utilized a repeated measures, randomized, counter-balanced design. Forty-four participants visited the laboratory on four occasions. Baseline fitness testing was conducted to establish peak power output in Watts (W peak). Three subsequent visits involved a single bout of a) HIT, corresponding to 1-minute at ∼ 100% W peak and 1-minute at ∼ 20% W peak for 20 minutes, b) CMI, corresponding to ∼ 40% W peak for 40 minutes, and c) CVI, corresponding to ∼ 80% W peak for 20 minutes. The order of the sessions was randomized. Affective responses were measured before, during and after each session. Task self-efficacy, intentions, enjoyment and preference were measured after sessions. Participants reported greater enjoyment of HIT as compared to CMI and CVI, with over 50% of participants reporting a preference to engage in HIT as opposed to either CMI or CVI. HIT was considered more pleasurable than CVI after exercise, but less pleasurable than CMI at these times. Despite this participants reported being just as confident to engage in HIT as they were CMI, but less confident to engage in CVI. This study highlights the utility of HIT in inactive individuals, and suggests that it may be a viable alternative to traditionally prescribed continuous modalities of exercise for promoting self-efficacy and enjoyment of exercise.

Integrated Validation System for a Thermal-hydraulic System Code, TASS/SMR-S

Energy Technology Data Exchange (ETDEWEB)

Kim, Hee-Kyung; Kim, Hyungjun; Kim, Soo Hyoung; Hwang, Young-Dong [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of); Kim, Hyeon-Soo [Chungnam National University, Daejeon (Korea, Republic of)

2015-10-15

Development including enhancement and modification of thermal-hydraulic system computer code is indispensable to a new reactor, SMART. Usually, a thermal-hydraulic system code validation is achieved by a comparison with the results of corresponding physical effect tests. In the reactor safety field, a similar concept, referred to as separate effect tests has been used for a long time. But there are so many test data for comparison because a lot of separate effect tests and integral effect tests are required for a code validation. It is not easy to a code developer to validate a computer code whenever a code modification is occurred. IVS produces graphs which shown the comparison the code calculation results with the corresponding test results automatically. IVS was developed for a validation of TASS/SMR-S code. The code validation could be achieved by a comparison code calculation results with corresponding test results. This comparison was represented as a graph for convenience. IVS is useful before release a new code version. The code developer can validate code result easily using IVS. Even during code development, IVS could be used for validation of code modification. The code developer could gain a confidence about his code modification easily and fast and could be free from tedious and long validation work. The popular software introduced in IVS supplies better usability and portability.

Comparison of Engine Cycle Codes for Rocket-Based Combined Cycle Engines

Science.gov (United States)

Waltrup, Paul J.; Auslender, Aaron H.; Bradford, John E.; Carreiro, Louis R.; Gettinger, Christopher; Komar, D. R.; McDonald, J.; Snyder, Christopher A.

2002-01-01

This paper summarizes the results from a one day workshop on Rocket-Based Combined Cycle (RBCC) Engine Cycle Codes held in Monterey CA in November of 2000 at the 2000 JANNAF JPM with the authors as primary participants. The objectives of the workshop were to discuss and compare the merits of existing Rocket-Based Combined Cycle (RBCC) engine cycle codes being used by government and industry to predict RBCC engine performance and interpret experimental results. These merits included physical and chemical modeling, accuracy and user friendliness. The ultimate purpose of the workshop was to identify the best codes for analyzing RBCC engines and to document any potential shortcomings, not to demonstrate the merits or deficiencies of any particular engine design. Five cases representative of the operating regimes of typical RBCC engines were used as the basis of these comparisons. These included Mach 0 sea level static and Mach 1.0 and Mach 2.5 Air-Augmented-Rocket (AAR), Mach 4 subsonic combustion ramjet or dual-mode scramjet, and Mach 8 scramjet operating modes. Specification of a generic RBCC engine geometry and concomitant component operating efficiencies, bypass ratios, fuel/oxidizer/air equivalence ratios and flight dynamic pressures were provided. The engine included an air inlet, isolator duct, axial rocket motor/injector, axial wall fuel injectors, diverging combustor, and exit nozzle. Gaseous hydrogen was used as the fuel with the rocket portion of the system using a gaseous H2/O2 propellant system to avoid cryogenic issues. The results of the workshop, even after post-workshop adjudication of differences, were surprising. They showed that the codes predicted essentially the same performance at the Mach 0 and I conditions, but progressively diverged from a common value (for example, for fuel specific impulse, Isp) as the flight Mach number increased, with the largest differences at Mach 8. The example cases and results are compared and discussed in this paper.

Comparison of computer code calculations with experimental results obtained in the NSPP series of experiments

International Nuclear Information System (INIS)

Tobias, M.L.

1987-01-01

Experiments were done on several aerosols in air atmospheres at varying temperatures and humidity conditions of interest in forming a data base for testing aerosol behavior models used as part of the process of evaluating the ''source term'' in light water reactor accidents. This paper deals with the problems of predicting the observed experimental data for suspended aerosol concentration with aerosol calculational codes. Comparisons of measured versus predicted data are provided

MCMEG: Simulations of both PDD and TPR for 6 MV LINAC photon beam using different MC codes

International Nuclear Information System (INIS)

Fonseca, T.C.F.; Mendes, B.M.; Lacerda, M.A.S.; Silva, L.A.C.; Paixão, L.

2017-01-01

The Monte Carlo Modelling Expert Group (MCMEG) is an expert network specializing in Monte Carlo radiation transport and the modelling and simulation applied to the radiation protection and dosimetry research field. For the first inter-comparison task the group launched an exercise to model and simulate a 6 MV LINAC photon beam using the Monte Carlo codes available within their laboratories and validate their simulated results by comparing them with experimental measurements carried out in the National Cancer Institute (INCA) in Rio de Janeiro, Brazil. The experimental measurements were performed using an ionization chamber with calibration traceable to a Secondary Standard Dosimetry Laboratory (SSDL). The detector was immersed in a water phantom at different depths and was irradiated with a radiation field size of 10×10 cm 2 . This exposure setup was used to determine the dosimetric parameters Percentage Depth Dose (PDD) and Tissue Phantom Ratio (TPR). The validation process compares the MC calculated results to the experimental measured PDD20,10 and TPR20,10. Simulations were performed reproducing the experimental TPR20,10 quality index which provides a satisfactory description of both the PDD curve and the transverse profiles at the two depths measured. This paper reports in detail the modelling process using MCNPx, MCNP6, EGSnrc and Penelope Monte Carlo codes, the source and tally descriptions, the validation processes and the results. - Highlights: • MCMEG is an expert network specializing in Monte Carlo radiation transport. • MCNPx, MCNP6, EGSnrc and Penelope Monte Carlo codes are used. • Exercise to model and simulate a 6 MV LINAC photon beam using the Monte Carlo codes. • The PDD 20,10 and TPR 20,10 dosimetric parameters were compared with real data. • The paper reports in the modelling process using different Monte Carlo codes.

UEDGE code comparisons with DIII-D bolometer data

Energy Technology Data Exchange (ETDEWEB)

Daniel, J.M.

1994-12-01

This paper describes the work done to develop a bolometer post processor that converts volumetric radiated power values taken from a UEDGE solution, to a line integrated radiated power along chords of the bolometers in the DIII-D tokamak. The UEDGE code calculates plasma physics quantities, such as plasma density, radiated power, or electron temperature, and compares them to actual diagnostic measurements taken from the scrape off layer (SOL) and divertor regions of the DIII-D tokamak. Bolometers are devices measuring radiated power within the tokamak. The bolometer interceptors are made up of two complete arrays, an upper array with a vertical view and a lower array with a horizontal view, so that a two dimensional profile of the radiated power may be obtained. The bolometer post processor stores line integrated values taken from UEDGE solutions into a file in tabular format. Experimental data is then put into tabular form and placed in another file. Comparisons can be made between the UEDGE solutions and actual bolometer data. Analysis has been done to determine the accuracy of the plasma physics involved in producing UEDGE simulations.

Development and validation of computer codes for analysis of PHWR containment behaviour

International Nuclear Information System (INIS)

Markandeya, S.G.; Haware, S.K.; Ghosh, A.K.; Venkat Raj, V.

1997-01-01

In order to ensure that the design intent of the containment of Indian Pressurised Heavy Water Reactors (IPHWRs) is met, both analytical and experimental studies are being pursued at BARC. As a part of analytical studies, computer codes for predicting the behaviour of containment under various accident scenarios are developed/adapted. These include codes for predicting 1) pressure, temperature transients in the containment following either Loss of Coolant Accident (LOCA) or Main Steam Line Break (MSLB), 2) hydrogen behaviour in respect of its distribution, combustion and the performance of proposed mitigation systems, and 3) behaviour of fission product aerosols in the piping circuits of the primary heat transport system and in the containment. All these codes have undergone thorough validation using data obtained from in-house test facilities or from international sources. Participation in the International Standard Problem (ISP) exercises has also helped in validation of the codes. The present paper briefly describes some of these codes and the various exercises performed for their validation. (author)

Effect of core stabilization exercises versus conventional exercises on pain and functional status in patients with non-specific low back pain: a randomized clinical trial.

Science.gov (United States)

Inani, Sumit B; Selkar, Sohan P

2013-01-01

Low Back Pain (LBP) results in significant level of disability, producing significant restriction on usual activity such as an inability to work. Nearly two third of the adults are affected by non-specific low back pain at some point in their lives. The purpose of the study was to determine the effect of core stabilization exercises in comparison with conventional exercises on pain, functional status in patients with non-specific LBP. Thirty patients diagnosed with non-specific LBP participated with age group between 20-50 years and divided in to 2 groups, one with core stabilization exercises and other conventional exercises, 15 subjects each. Three months study, pre and post treatment outcome measures used were VAS for pain intensity and Modified Oswestry Low Back Pain Disability Index for functional status (disability). Data were analyzed using student 't' test (paired and unpaired). Whereas both groups improved significantly from the initiation of treatment, a between-group comparison revealed significantly greater (ppain and functional status for experimental group compared to control group. Core stabilization exercises were found to be more effective in reducing pain and improving functional status by decreasing disability of patients with non-specific low back pain in comparison with conventional exercises.

Application of RASCAL code for multiunit accident in domestic nuclear sites

Energy Technology Data Exchange (ETDEWEB)

Park, Sang Hyun; Jeong, Seung Young [Korea Institute of Nuclear Safety, Daejeon (Korea, Republic of)

2014-10-15

All of domestic nuclear power plant sites are multiunit site (at least 5 - 6 reactors are operating), so this capability has to be quickly secured for nuclear licensee and institutes responsible for nuclear emergency response. In this study, source term and offsite dose from multiunit event were assessed using a computer code, RASCAL. An emergency exercise scenario was chosen to verify applicability of the codes to domestic nuclear site accident. Employing tools and new features of the code, such as merging more than two individual source terms and source term estimate for long term progression accident, main parameters and information in the scenario, release estimates and dose projections were performed. Radiological releases and offsite doses from multiunit accident were calculated using RASCAL.. A scenario, in which three reactors were damaged coincidently by a great natural disaster, was considered. Surrogate plants were chosen for the code calculation. Source terms of each damaged unit were calculated individually first, and then total source term and integrated offsite dose assessment data was acquired using a source term merge function in the code. Also comparison between LTSBO and LOCA source term estimate options was performed. Differences in offsite doses were caused by release characteristics. From LTSBO option, iodines were released much higher than LOCA. Also LTSBO source term release was delayed and the duration was longer than LOCA. This option would be useful to accidents which progress with much longer time frame than LOCA. RASCAL can be useful tool for radiological consequence assessment in domestic nuclear site accidents.

Computer code SICHTA-85/MOD 1 for thermohydraulic and mechanical modelling of WWER fuel channel behaviour during LOCA and comparison with original version of the SICHTA code

International Nuclear Information System (INIS)

Bujan, A.; Adamik, V.; Misak, J.

1986-01-01

A brief description is presented of the expansion of the SICHTA-83 computer code for the analysis of the thermal history of the fuel channel for large LOCAs by modelling the mechanical behaviour of fuel element cladding. The new version of the code has a more detailed treatment of heat transfer in the fuel-cladding gap because it also respects the mechanical (plastic) deformations of the cladding and the fuel-cladding interaction (magnitude of contact pressure). Also respected is the change in pressure of the gas filling of the fuel element, the mechanical criterion is considered of a failure of the cladding and the degree is considered of the blockage of the through-flow cross section for coolant flow in the fuel channel. The LOCA WWER-440 model computation provides a comparison of the new SICHTA-85/MOD 1 code with the results of the original 83 version of SICHTA. (author)

Simulation of guided-wave ultrasound propagation in composite laminates: Benchmark comparisons of numerical codes and experiment.

Science.gov (United States)

Leckey, Cara A C; Wheeler, Kevin R; Hafiychuk, Vasyl N; Hafiychuk, Halyna; Timuçin, Doğan A

2018-03-01

Ultrasonic wave methods constitute the leading physical mechanism for nondestructive evaluation (NDE) and structural health monitoring (SHM) of solid composite materials, such as carbon fiber reinforced polymer (CFRP) laminates. Computational models of ultrasonic wave excitation, propagation, and scattering in CFRP composites can be extremely valuable in designing practicable NDE and SHM hardware, software, and methodologies that accomplish the desired accuracy, reliability, efficiency, and coverage. The development and application of ultrasonic simulation approaches for composite materials is an active area of research in the field of NDE. This paper presents comparisons of guided wave simulations for CFRP composites implemented using four different simulation codes: the commercial finite element modeling (FEM) packages ABAQUS, ANSYS, and COMSOL, and a custom code executing the Elastodynamic Finite Integration Technique (EFIT). Benchmark comparisons are made between the simulation tools and both experimental laser Doppler vibrometry data and theoretical dispersion curves. A pristine and a delamination type case (Teflon insert in the experimental specimen) is studied. A summary is given of the accuracy of simulation results and the respective computational performance of the four different simulation tools. Published by Elsevier B.V.

Final comparison report on ISP-35: Nupec hydrogen mixing and distribution test (Test M-7-1)

International Nuclear Information System (INIS)

1994-12-01

This final comparison report summarizes the results of the OECD/CSNI sponsored ISP-35 exercise which was based on NUPEC's Hydrogen Mixing and Distribution Test M-7-1. 12 organizations from 10 different countries took part in the exercise. For the ISP-35 test, a steam/light gas (helium) mixture was released into the lower region of a simplified model of a PWR containment. At the same time, the dome cooling spray was also activated. the transient time histories for gas temperature and concentrations were recorded for each of the 25 compartments of the model containment. The wall temperatures as well as the dome pressure were also recorded. The ISP-35 participants simulated the test conditions and attempted to predict the time histories using their accident analysis codes. Results of these analyses are presented, and comparisons are made between the experimental data and the calculated data. In general, predictions for pressure, helium concentration and gas distribution patterns were achieved with acceptable accuracy

Comparisons in the Recovery Response From Resistance Exercise Between Young and Middle-Aged Men.

Science.gov (United States)

Gordon, Joseph A; Hoffman, Jay R; Arroyo, Eliott; Varanoske, Alyssa N; Coker, Nicholas A; Gepner, Yftach; Wells, Adam J; Stout, Jeffrey R; Fukuda, David H

2017-12-01

Gordon, JA III, Hoffman, JR, Arroyo, E, Varanoske, AN, Coker, NA, Gepner, Y, Wells, AJ, Stout, JR, and Fukuda, DH. Comparisons in the recovery response from resistance exercise between young and middle-aged men. J Strength Cond Res 31(12): 3454-3462, 2017-The purpose of this study was to compare the effects of a bout of high-volume isokinetic resistance exercise protocol (HVP) on lower-body strength and markers of inflammation and muscle damage during recovery between young and middle-aged adult men. Nineteen recreationally trained men were classified as either a young adult (YA: 21.8 ± 2.0 years; 90.7 ± 11.6 kg) or a middle-aged adult (MA: 47.0 ± 4.4 years; 96.0 ± 21.5 kg) group. The HVP consisted of 8 sets of 10 repetitions, with 1 minute of rest between each set, performed on an isokinetic dynamometer at 60°·s. Maximal voluntary isometric contractions and isokinetic peak torque (PKT) and average torque (AVGT) (measured at 240° and 60°·s, respectively) were assessed at baseline (BL), immediately post (IP), 120 minutes, 24, and 48 hours after HVP. Blood was obtained at BL, IP, 30, 60, 120 minute, 24, and 48 hours after HVP to assess muscle damage and inflammation. All performance data were analyzed using repeated measures analysis of covariance, whereas all inflammatory and muscle damage markers were analyzed using a 2-way (time × group) repeated measures analysis of variance. Results revealed no between-group differences for PKT, AVGT, or rate of torque development at 200 ms (RTD200). No between-group differences in myoglobin, creatine kinase, C-reactive protein, or interleukin-6 were observed. Although BL differences in muscle performance were observed between YA and MA, no between-group differences were noted in performance recovery measures from high-volume isokinetic exercise in recreationally trained men. These results also indicate that the inflammatory and muscle damage response from high-volume isokinetic exercise is similar between

Blind prediction exercise on modeling of PHWR fuel at extended burnup

International Nuclear Information System (INIS)

Sah, D.N.; Viswanathan, U.K.; Viswanadham, C.S.; Unnikrishnan, K.; Rath, B.N.

2008-01-01

A blind prediction exercise was organised on Indian Pressurised Heavy Water Reactor (PHWR) fuel to investigate the predictive capability of existing codes for their application at extended burnup and to identify areas of improvement. The blind problem for this exercise was based on a PHWR fuel bundle irradiated in Kakrapar Atomic Power Station-I (KAPS-I) up to about 15 000 MWd/tU and subjected to detailed post-irradiation examination (PIE) in the hot cells facility at BARC. Eleven computer codes from seven countries participated in this exercise. The participants provided blind predictions of fuel temperature, fission gas release, internal gas pressure and other performance parameters for the fuel pins. The predictions were compared with the experimental PIE data which included fuel temperature derived from fuel restructuring, fission gas release measured by fuel pin puncturing, internal gas pressure in pin, cladding oxidation and fuel microstructural data. The details of the blind problem and an analysis of the results of blind predictions by the codes vis-a-vis measured data are provided in this paper

Comparison of whole-body vibration exercise and plyometric exercise to improve isokinetic muscular strength, jumping performance and balance of female volleyball players

OpenAIRE

Kim, Yong-Youn; Park, Si-Eun

2016-01-01

[Purpose] The purpose of this study was to assess the effect of whole-body vibration exercise and plyometric exercise on female volleyball players. [Subjects and Methods] Subjects were randomly allocated to two exercise groups (whole-body vibration exercise group and plyometric exercise group). The exercise was conducted three times each week for 8 weeks. Isokinetic muscular strength, jumping performance, and balance were measured before starting the exercise and after finishing the 8 weeks o...

Some aspects of grading Java code submissions in MOOCs

Directory of Open Access Journals (Sweden)

Sándor Király

2017-07-01

Full Text Available Recently, massive open online courses (MOOCs have been offering a new online approach in the field of distance learning and online education. A typical MOOC course consists of video lectures, reading material and easily accessible tests for students. For a computer programming course, it is important to provide interactive, dynamic, online coding exercises and more complex programming assignments for learners. It is expedient for the students to receive prompt feedback on their coding submissions. Although MOOC automated programme evaluation subsystem is capable of assessing source programme files that are in learning management systems, in MOOC systems there is a grader that is responsible for evaluating students’ assignments with the result that course staff would be required to assess thousands of programmes submitted by the participants of the course without the benefit of an automatic grader. This paper presents a new concept for grading programming submissions of students and improved techniques based on the Java unit testing framework that enables automatic grading of code chunks. Some examples are also given such as the creation of unique exercises by dynamically generating the parameters of the assignment in a MOOC programming course combined with the kind of coding style recognition to teach coding standards.

A class of Sudan-decodable codes

DEFF Research Database (Denmark)

Nielsen, Rasmus Refslund

2000-01-01

In this article, Sudan's algorithm is modified into an efficient method to list-decode a class of codes which can be seen as a generalization of Reed-Solomon codes. The algorithm is specialized into a very efficient method for unique decoding. The code construction can be generalized based...... on algebraic-geometry codes and the decoding algorithms are generalized accordingly. Comparisons with Reed-Solomon and Hermitian codes are made....

Comparison of 'system thermal-hydraulics-3 dimensional reactor kinetics' coupled calculations using the MARS 1D and 3D modules and the MASTER code

International Nuclear Information System (INIS)

Jung, J. J.; Joo, H. K.; Lee, W. J.; Ji, S. K.; Jung, B. D.

2002-01-01

KAERI has developed the coupled 'system thermal-hydraulics - 3 dimensional reactor kinetics' code, MARS/MASTER since 1998. However, there is a limitation in the existing MARS/MASTER code; that is, to perform the coupled calculations using MARS/MASTER, we have to utilize the hydrodynamic model and the heat structure model of the MARS '3D module'. In some transients, reactor kinetics behavior is strongly multi-dimensional, but core thermal-hydraulic behavior remains in one-dimensional manner. For efficient analysis of such transients, we coupled the MARS 1D module with MASTER. The new feature has been assessed by the 'OECD NEA Main Steam Line Break (MSLB) benchmark exercise III' simulations

Computation of a BWR Turbine Trip with CATHARE-CRONOS2-FLICA4 Coupled Codes

International Nuclear Information System (INIS)

Mignot, G.; Royer, E.; Rameau, B.; Todorova, N.

2004-01-01

The CEA/DEN modeling and computation results with the CATHARE, CRONOS2, and FLICA4 codes of the Organisation for Economic Co-operation and Development boiling water reactor turbine trip benchmark are presented. The first exercise of the benchmark to model the whole reactor thermal hydraulics with specified power has been performed with the CATHARE system code. Exercise 2, devoted to core thermal-hydraulic neutronic analysis with provided boundary conditions and neutronic cross sections, has been carried out with the CRONOS2 and FLICA4 codes. Finally, exercise 3, combining system thermal hydraulics and core three-dimensional thermal-hydraulics-neutronics, was computed with the three coupled codes: CATHARE, CRONOS2, and FLICA4.Our one-dimensional thermal-hydraulic reactor computation agrees well with the benchmark reference data and demonstrates the capacities of CATHARE to model a turbine trip transient. Coupled three-dimensional thermal-hydraulic and neutronic analysis displays a high sensitivity of the power peak to the core thermal-hydraulic model. The use of at least 100 channels is recommended to achieve reasonable results for integral and local parameters. Deviations between experimental data and exercise 3 results are discussed: timing of events, core pressure drop, and neutronic model. Finally, analysis of extreme scenarios as sensitivity studies on the transient to assess the effect of the scram, the bypass relief valve, and the steam relief valves is presented

Update on comparison of the particle production using Mars simulation code

CERN Document Server

Prior, G; Kirk, H G; Souchlas, N; Ding, X

2011-01-01

In the International Design Study for the Neutrino Factory (IDS-NF), a 5-15 GeV (kinetic energy) proton beam impinges a Hg jet target, in order to produce pions that will decay into muons. The muons are captured and transformed into a beam, then passed to the downstream acceleration system. The target sits in a solenoid eld tapering from 20 T down to below 2 T, over several meters, permitting an optimized capture of the pions that will produce useful muons for the machine. The target and pion capture systems have been simulated using MARS. This paper presents an updated comparison of the particles production using the MARS code versions m1507 and m1510 on different machines located at the European Organization for Nuclear Research (CERN) and Brookhaven National Laboratory (BNL).

OECD/DOE/CEA VVER-1000 coolant transient (V1000CT) benchmark - a consistent approach for assessing coupled codes for RIA analysis

International Nuclear Information System (INIS)

Boyan D Ivanov; Kostadin N Ivanov; Eric Royer; Sylvie Aniel; Nikola Kolev; Pavlin Groudev

2005-01-01

assumptions to enhance the code-to-code comparisons. The paper presents an overview of the benchmark activities and describes different exercises within the framework of the two benchmark phases. Selected comparative analysis of the submitted participants' results for the three exercises of Phase 1 is presented with emphasis on the observed modeling issues and deviations form the measured data. Preliminary results for Exercise 1 of Phase 2 obtained with CFD codes will be also presented. (authors)

NEACRP comparison of codes for the radiation protection assessment of transportation packages. Solutions to problems 1 - 4

International Nuclear Information System (INIS)

Avery, A.F.; Locke, H.F.

1992-03-01

In 1985 the Reactor Physics Committee of the Nuclear Energy Agency initiated an intercomparison of codes for the calculation of the performance of shielding for the transportation of spent reactor fuel. The results of the application of a range of codes to the prediction of the dose-rates in the four theoretical benchmarks set to examine the attenuation of radiation through a variety of cask geometries are presented in this report. The contributions from neutrons, fission product gamma-rays and secondary gamma-rays are tabulated separately, and grouped according to the type of method of calculation employed. A brief discussion is included for each set of results, and overall comparisons of the methods, codes, and nuclear data are made. A number of conclusions are drawn on the advantages and disadvantages of the various methods of calculation, based upon the results of their application to these four benchmark problems

Electromyographical Comparison of Four Common Shoulder Exercises in Unstable and Stable Shoulders

Directory of Open Access Journals (Sweden)

Aaron Sciascia

2012-01-01

Full Text Available This study examines if electromyographic (EMG amplitude differences exist between patients with shoulder instability and healthy controls performing scaption, prone horizontal abduction, prone external rotation, and push-up plus shoulder rehabilitation exercises. Thirty nine subjects were categorized by a single orthopedic surgeon as having multidirectional instability (n=10, anterior instability (n=9, generalized laxity (n=10, or a healthy shoulder (n=10. Indwelling and surface electrodes were utilized to measure EMG activity (reported as a % of maximum voluntary isometric contraction (MVIC in various shoulder muscles during 4 common shoulder exercises. The exercises studied effectively activated the primary musculature targeted in each exercise equally among all groups. The serratus anterior generated high activity (50–80% MVIC during a push-up plus, while the infraspinatus and teres major generated moderate-to-high activity (30–80% MVIC during both the prone horizontal and prone external rotation exercises. Scaption exercise generated moderate activity (20–50% MVIC in both rotator cuff and scapular musculature. Clinicians should feel confident in prescribing these shoulder-strengthening exercises in patients with shoulder instability as the activation levels are comparable to previous findings regarding EMG amplitudes and should improve the dynamic stabilization capability of both rotator cuff and scapular muscles using exercises designed to address glenohumeral joint instability.

A Theory-Based Exercise App to Enhance Exercise Adherence: A Pilot Study.

Science.gov (United States)

Voth, Elizabeth C; Oelke, Nelly D; Jung, Mary E

2016-06-15

Use of mobile health (mHealth) technology is on an exponential rise. mHealth apps have the capability to reach a large number of individuals, but until now have lacked the integration of evidence-based theoretical constructs to increase exercise behavior in users. The purpose of this study was to assess the effectiveness of a theory-based, self-monitoring app on exercise and self-monitoring behavior over 8 weeks. A total of 56 adults (mean age 40 years, SD 13) were randomly assigned to either receive the mHealth app (experimental; n=28) or not to receive the app (control; n=28). All participants engaged in an exercise goal-setting session at baseline. Experimental condition participants received weekly short message service (SMS) text messages grounded in social cognitive theory and were encouraged to self-monitor exercise bouts on the app on a daily basis. Exercise behavior, frequency of self-monitoring exercise behavior, self-efficacy to self-monitor, and self-management of exercise behavior were collected at baseline and at postintervention. Engagement in exercise bouts was greater in the experimental condition (mean 7.24, SD 3.40) as compared to the control condition (mean 4.74, SD 3.70, P=.03, d=0.70) at week 8 postintervention. Frequency of self-monitoring increased significantly over the 8-week investigation between the experimental and control conditions (Pcomparison to those in the control condition (mean 1.95, SD 2.58, Psocial cognitive theory into an mHealth exercise self-monitoring app provides support for future research to feasibly integrate theoretical constructs into existing exercise apps. In addition, findings provide preliminary support for theory-based apps to increase self-monitoring and exercise behavior in comparison to a control, no-app condition.

OECD/NEA International Benchmark exercises: Validation of CFD codes applied nuclear industry; OECD/NEA internatiion Benchmark exercices: La validacion de los codigos CFD aplicados a la industria nuclear

Energy Technology Data Exchange (ETDEWEB)

Pena-Monferrer, C.; Miquel veyrat, A.; Munoz-Cobo, J. L.; Chiva Vicent, S.

2016-08-01

In the recent years, due, among others, the slowing down of the nuclear industry, investment in the development and validation of CFD codes, applied specifically to the problems of the nuclear industry has been seriously hampered. Thus the International Benchmark Exercise (IBE) sponsored by the OECD/NEA have been fundamental to analyze the use of CFD codes in the nuclear industry, because although these codes are mature in many fields, still exist doubts about them in critical aspects of thermohydraulic calculations, even in single-phase scenarios. The Polytechnic University of Valencia (UPV) and the Universitat Jaume I (UJI), sponsored by the Nuclear Safety Council (CSN), have actively participated in all benchmark's proposed by NEA, as in the expert meetings,. In this paper, a summary of participation in the various IBE will be held, describing the benchmark itself, the CFD model created for it, and the main conclusions. (Author)

Validation of one-dimensional module of MARS 2.1 computer code by comparison with the RELAP5/MOD3.3 developmental assessment results

International Nuclear Information System (INIS)

Lee, Y. J.; Bae, S. W.; Chung, B. D.

2003-02-01

This report records the results of the code validation for the one-dimensional module of the MARS 2.1 thermal hydraulics analysis code by means of result-comparison with the RELAP5/MOD3.3 computer code. For the validation calculations, simulations of the RELAP5 code development assessment problem, which consists of 22 simulation problems in 3 categories, have been selected. The results of the 3 categories of simulations demonstrate that the one-dimensional module of the MARS 2.1 code and the RELAP5/MOD3.3 code are essentially the same code. This is expected as the two codes have basically the same set of field equations, constitutive equations and main thermal hydraulic models. The results suggests that the high level of code validity of the RELAP5/MOD3.3 can be directly applied to the MARS one-dimensional module

NEACRP comparison of source term codes for the radiation protection assessment of transportation packages

International Nuclear Information System (INIS)

Broadhead, B.L.; Locke, H.F.; Avery, A.F.

1994-01-01

The results for Problems 5 and 6 of the NEACRP code comparison as submitted by six participating countries are presented in summary. These problems concentrate on the prediction of the neutron and gamma-ray sources arising in fuel after a specified irradiation, the fuel being uranium oxide for problem 5 and a mixture of uranium and plutonium oxides for problem 6. In both problems the predicted neutron sources are in good agreement for all participants. For gamma rays, however, there are differences, largely due to the omission of bremsstrahlung in some calculations

The Effect of Exercise in PCOS Women Who Exercise Regularly.

Science.gov (United States)

Khademi, Afsaneh; Alleyassin, Ashraf; Aghahosseini, Marzieh; Tabatabaeefar, Leila; Amini, Mehrnoosh

2010-03-01

To determine the prevalence of polycystic ovary syndrome (PCOS) in women who exercise regularly. All women under age 45 from an industrial company who had past history of exercising more than 6 months enrolled in this cross-sectional study. Prevalence of PCOS and comparison of BMI between PCOS and non-PCOS subgroups was done. The diagnosis of PCOS was based on the revised 2003 Rotterdam ESHRE/ASRM consensus criteria and exclusion of related disorders. The prevalence of PCOS in was 8.8%; 95% CI: 8.5%-9.1%. In obese subjects, mean BMI differed significantly between PCOS and non-PCOS women (29.3 ±3.3 kg/m(2) vs. 27.8 ± 2 kg/m(2), P=0.03). In lean subjects, there was no statistically significant difference in terms of BMI between PCOS and non-PCOS women (21.4 ± 1.9 kg/m(2) vs. 21.2 ± 2 kg/m(2), P>0.05). Obese PCOS patients show more difficulty in losing weight by exercise than lean PCOS patients. The role of hormonal alterations and PCOS per se in the responsiveness of weight loss to exercise remains to be determined.

Comparison of computer codes relative to the aerosol behavior in the reactor containment building during severe core damage accidents in a PWR

International Nuclear Information System (INIS)

Fermandjian, J.; Bunz, H.; Dunbar, I.; Gauvain, J.; Ricchena, R.

1986-01-01

The present study concerns a comparative exercise, performed within the framework of the Commission of the European Communities, of the computer codes (AEROSIM-M, UK; AEROSOLS/B1, France; CORRAL-2, CEC and NAUA Mod5, Germany) used in order to assess the aerosol behavior in the reactor containment building during severe core damage accidents in a PWR. Topics considered in this paper include aerosols, containment buildings, reactor safety, fission product release, reactor cores, meltdown, and monitoring

The aeroelastic code FLEXLAST

Energy Technology Data Exchange (ETDEWEB)

Visser, B. [Stork Product Eng., Amsterdam (Netherlands)

1996-09-01

To support the discussion on aeroelastic codes, a description of the code FLEXLAST was given and experiences within benchmarks and measurement programmes were summarized. The code FLEXLAST has been developed since 1982 at Stork Product Engineering (SPE). Since 1992 FLEXLAST has been used by Dutch industries for wind turbine and rotor design. Based on the comparison with measurements, it can be concluded that the main shortcomings of wind turbine modelling lie in the field of aerodynamics, wind field and wake modelling. (au)

A comparison of isomaltulose versus maltodextrin ingestion during soccer-specific exercise.

Science.gov (United States)

Stevenson, Emma J; Watson, Anthony; Theis, Stephan; Holz, Anja; Harper, Liam D; Russell, Mark

2017-11-01

The performance and physiological effects of isomaltulose and maltodextrin consumed intermittently during prolonged soccer-specific exercise were investigated. University soccer players (n = 22) performed 120 min of intermittent exercise while consuming 8% carbohydrate-electrolyte drinks (equivalent to ~ 20 g h -1 ) containing maltodextrin (Glycaemic Index: 90-100), isomaltulose (Glycaemic Index: 32) or a carbohydrate-energy-free placebo in a manner replicating the practices of soccer players (i.e., during warm-up and half-time). Physical (sprinting, jumping) and technical (shooting, dribbling) performance was assessed. Blood glucose and plasma insulin (both P  13% higher blood glucose concentrations between 75 and 90 min versus maltodextrin (P  0.05). Ratings of abdominal discomfort were influenced by trial (P soccer-specific exercise, isomaltulose maintained higher blood glucose at 75-90 min, lessened the magnitude of the exercise-induced rebound glycaemic response and attenuated epinephrine increases whilst maintaining similar abdominal discomfort values relative to maltodextrin. When limited opportunities exist to consume carbohydrates on competition-day, low-glycaemic isomaltulose may offer an alternative nutritional strategy for exercising soccer players.

Validation of thermalhydraulic codes

International Nuclear Information System (INIS)

Wilkie, D.

1992-01-01

Thermalhydraulic codes require to be validated against experimental data collected over a wide range of situations if they are to be relied upon. A good example is provided by the nuclear industry where codes are used for safety studies and for determining operating conditions. Errors in the codes could lead to financial penalties, to the incorrect estimation of the consequences of accidents and even to the accidents themselves. Comparison between prediction and experiment is often described qualitatively or in approximate terms, e.g. ''agreement is within 10%''. A quantitative method is preferable, especially when several competing codes are available. The codes can then be ranked in order of merit. Such a method is described. (Author)

Preparation of emergency care centre exercises

International Nuclear Information System (INIS)

Schnadt, H.; Miska, H.

2011-01-01

Setup and operation of emergency care centres (sometimes also addressed as emergency reception centres) are part of emergency response in the environs of nuclear power plants. The preparation of an exercise scenario for such a centre is very demanding on the responsible agency. Therefore, a computer code has been developed which helps to translate the exercise objectives into instructions for figurants which simulate the affected population. These instructions are intended to steer a determined flow of people through the emergency care centre by providing fictitious radiological readings and by injecting the demand for additional actions of response personnel by statements and questions. (orig.)

A comparison of beliefs about exercise during pregnancy between Chinese and Australian pregnant women.

Science.gov (United States)

Guelfi, Kym J; Wang, Chen; Dimmock, James A; Jackson, Ben; Newnham, John P; Yang, Huixia

2015-12-22

Despite the well-established benefits of exercise during pregnancy, many women remain inactive. This may be related, in part, to women's beliefs about exercise in pregnancy, which are likely influenced by cultural background. Accordingly, the aim of this study was to compare attitudes, subjective norms, and perceived behavioural control toward exercise, together with current levels of exercise participation between Chinese and Australian women during pregnancy. A second aim was to determine the extent to which these factors predict intention to exercise within a Theory of Planned Behaviour framework. Pregnant women (22 ± 2 weeks of gestation) living in China (n = 240) and Australia (n = 215) completed a questionnaire designed to assess a) maternal beliefs regarding the importance of exercise in relation to other health behaviours, b) attitudes, subjective norms, perceived behavioural control and intentions toward exercise, and c) current levels of physical activity. One-way analyses of variance were used to compare the demographics, maternal beliefs, attitudes, subjective norms, perceived behavioural control, intentions to exercise, and current physical activity levels between the Chinese and Australian samples. Structural equation modelling was used to determine which factors predicted intention to exercise in the two samples. Australian women reported higher levels of current exercise and intentions to exercise in the next four weeks of pregnancy compared with Chinese women. These observations were associated with higher instrumental attitudes, ratings of subjective norm, and perceived behavioural control toward exercise in the Australian women. Instrumental attitudes and perceived behavioural control predicted intention to exercise in the Australian women, while perceived behavioural control was the only predictor of intentions to exercise in the Chinese sample. Beliefs, attitudes, barriers and intentions towards exercise during pregnancy differ

Lawrence Livermore National Laboratory Probabilistic Seismic Hazard Codes Validation

International Nuclear Information System (INIS)

Savy, J B

2003-01-01

Probabilistic Seismic Hazard Analysis (PSHA) is a methodology that estimates the likelihood that various levels of earthquake-caused ground motion will be exceeded at a given location in a given future time-period. LLNL has been developing the methodology and codes in support of the Nuclear Regulatory Commission (NRC) needs for reviews of site licensing of nuclear power plants, since 1978. A number of existing computer codes have been validated and still can lead to ranges of hazard estimates in some cases. Until now, the seismic hazard community had not agreed on any specific method for evaluation of these codes. The Earthquake Engineering Research Institute (EERI) and the Pacific Engineering Earthquake Research (PEER) center organized an exercise in testing of existing codes with the aim of developing a series of standard tests that future developers could use to evaluate and calibrate their own codes. Seven code developers participated in the exercise, on a voluntary basis. Lawrence Livermore National laboratory participated with some support from the NRC. The final product of the study will include a series of criteria for judging of the validity of the results provided by a computer code. This EERI/PEER project was first planned to be completed by June of 2003. As the group neared completion of the tests, the managing team decided that new tests were necessary. As a result, the present report documents only the work performed to this point. It demonstrates that the computer codes developed by LLNL perform all calculations correctly and as intended. Differences exist between the results of the codes tested, that are attributed to a series of assumptions, on the parameters and models, that the developers had to make. The managing team is planning a new series of tests to help in reaching a consensus on these assumptions

The Coding Process and Its Challenges

Directory of Open Access Journals (Sweden)

Judith A. Holton, Ph.D.

2010-02-01

Full Text Available Coding is the core process in classic grounded theory methodology. It is through coding that the conceptual abstraction of data and its reintegration as theory takes place. There are two types of coding in a classic grounded theory study: substantive coding, which includes both open and selective coding procedures, and theoretical coding. In substantive coding, the researcher works with the data directly, fracturing and analysing it, initially through open coding for the emergence of a core category and related concepts and then subsequently through theoretical sampling and selective coding of data to theoretically saturate the core and related concepts. Theoretical saturation is achieved through constant comparison of incidents (indicators in the data to elicit the properties and dimensions of each category (code. This constant comparing of incidents continues until the process yields the interchangeability of indicators, meaning that no new properties or dimensions are emerging from continued coding and comparison. At this point, the concepts have achieved theoretical saturation and the theorist shifts attention to exploring the emergent fit of potential theoretical codes that enable the conceptual integration of the core and related concepts to produce hypotheses that account for relationships between the concepts thereby explaining the latent pattern of social behaviour that forms the basis of the emergent theory. The coding of data in grounded theory occurs in conjunction with analysis through a process of conceptual memoing, capturing the theorist’s ideation of the emerging theory. Memoing occurs initially at the substantive coding level and proceeds to higher levels of conceptual abstraction as coding proceeds to theoretical saturation and the theorist begins to explore conceptual reintegration through theoretical coding.

VVER-440 loading patterns optimization using ATHENA code

International Nuclear Information System (INIS)

Katovsky, K.; Sustek, J.; Bajgl, J.; Cada, R.

2009-01-01

In this paper the Czech optimization state-of-the-art, new code system development goals and OPAL optimization system are briefly mentioned. The algorithms, maths, present status and future developments of the ATHENA code are described. A calculation exercise of the Dukovany NPP cycles, on increased power using ATHENA, starting with on-coming 24th cycle (303 FPD) continuing with 25th (322 FPD), and 26th (336 FPD); for all cycles K R ≤1.54 is presented

Code-experiment comparison on wall condensation tests in the presence of non-condensable gases-Numerical calculations for containment studies

Energy Technology Data Exchange (ETDEWEB)

Malet, J., E-mail: jeanne.malet@irsn.fr [Institut de Radioprotection et de Surete Nucleaire (IRSN), PSN-RES, SCA, BP 68, 91192 Gif-sur-Yvette (France); Porcheron, E.; Dumay, F.; Vendel, J. [Institut de Radioprotection et de Surete Nucleaire (IRSN), PSN-RES, SCA, BP 68, 91192 Gif-sur-Yvette (France)

2012-12-15

Highlights: Black-Right-Pointing-Pointer Steam condensation on walls has been investigated in the TOSQAN vessel. Black-Right-Pointing-Pointer Experiments on 7 different tests have been performed. Black-Right-Pointing-Pointer Different steam injections and wall temperatures are used. Black-Right-Pointing-Pointer Simulations are performed in 2D using the TONUS code. Black-Right-Pointing-Pointer Code-experiments comparisons at many different locations show a good agreement. - Abstract: During the course of a severe Pressurized Water Reactor accident, pressurization of the containment occurs and hydrogen can be produced by the reactor core oxidation and distributed in the containment according to convection flows and wall condensation. Filmwise wall condensation in the presence of non-condensable gases is a subject of many interests and extensive studies have been performed in the past. Some empirical correlations have demonstrated their limit for extrapolation under different thermal-hydraulic conditions and at different geometries/scales. The French Institute for Radiological Protection and Nuclear Safety (IRSN) has developed a numerical tool and an experimental facility in order to investigate free convection flows in the presence of condensation. The objective of this paper is to present numerical results obtained on different wall condensation tests in 7 m{sup 3} volume vessel (TOSQAN facility), and to compare them with the experimental ones. Over eight tests are considered here, and code-experiment comparison is performed on many different locations, giving an extensive insight of the code assessment for air-steam mixture flows involving wall condensation in the presence of non-condensable gases.

Thermal-hydraulic analysis of the Three Mile Island Unit 2 reactor accident with THALES code

International Nuclear Information System (INIS)

Hashimoto, Kazuichiro; Soda, Kunihisa

1991-10-01

The OECD Nuclear Energy Agency (NEA) has established a Task Group in the Committee on the Safety of Nuclear Installations (CSNI) to perform an analysis of Three Mile Island Unit 2 (TMI-2) accident as a standard problem to benchmark severe accident computer codes and to assess the capability of the codes. The TMI-2 Analysis Exercise was performed at the Japan Atomic Energy Research Institute (JAERI) using the THALES (Thermal-Hydraulic Analysis of Loss-of-Coolant, Emergency Core Cooling and Severe Core Damage) - PM1/TMI code. The purpose of the analysis is to verify the capability of THALES-PM1/TMI code to describe accident progression in the actual plant. The present paper describes the final result of the TMI-2 Analysis Exercise performed at JAERI. (author)

Intracoin - International Nuclide Transport Code Intercomparison Study

International Nuclear Information System (INIS)

1984-09-01

The purpose of the project is to obtain improved knowledge of the influence of various strategies for radionuclide transport modelling for the safety assessment of final repositories for nuclear waste. This is a report of the first phase of the project which was devoted to a comparison of the numerical accuracy of the computer codes used in the study. The codes can be divided into five groups, namely advection-dispersion models, models including matrix diffusion and chemical effects and finally combined models. The results are presented as comparisons of calculations since the objective of level 1 was code verification. (G.B.)

[Comparative review of the Senegalese and French deontology codes].

Science.gov (United States)

Soumah, M; Mbaye, I; Bah, H; Gaye Fall, M C; Sow, M L

2005-01-01

The medical deontology regroups duties of the physicians and regulate the exercise of medicine. The code of medical deontology of Senegal inspired of the French medical deontology code, has not been revised since its institution whereas the French deontology code knew three revisions. Comparing the two codes of deontology titles by title and article by article, this work beyond a parallel between the two codes puts in inscription the progress in bioethics that are to the basis of the revisions of the French medical deontology code. This article will permit an advocacy of the health professionals, in favor of a setting to level of the of Senegalese medical deontology code. Because legal litigation, that is important in the developed countries, intensify in our developing countries. It is inherent to the technological progress and to the awareness of the patients of their rights.

An Efficient Method for Verifying Gyrokinetic Microstability Codes

Science.gov (United States)

Bravenec, R.; Candy, J.; Dorland, W.; Holland, C.

2009-11-01

Benchmarks for gyrokinetic microstability codes can be developed through successful ``apples-to-apples'' comparisons among them. Unlike previous efforts, we perform the comparisons for actual discharges, rendering the verification efforts relevant to existing experiments and future devices (ITER). The process requires i) assembling the experimental analyses at multiple times, radii, discharges, and devices, ii) creating the input files ensuring that the input parameters are faithfully translated code-to-code, iii) running the codes, and iv) comparing the results, all in an organized fashion. The purpose of this work is to automate this process as much as possible: At present, a python routine is used to generate and organize GYRO input files from TRANSP or ONETWO analyses. Another routine translates the GYRO input files into GS2 input files. (Translation software for other codes has not yet been written.) Other python codes submit the multiple GYRO and GS2 jobs, organize the results, and collect them into a table suitable for plotting. (These separate python routines could easily be consolidated.) An example of the process -- a linear comparison between GYRO and GS2 for a DIII-D discharge at multiple radii -- will be presented.

Comparison of gluteal and hamstring activation during five commonly used plyometric exercises.

Science.gov (United States)

Struminger, Aaron H; Lewek, Michael D; Goto, Shiho; Hibberd, Elizabeth; Blackburn, J Troy

2013-08-01

Anterior cruciate ligament injuries occur frequently in athletics, and anterior cruciate ligament injury prevention programs may decrease injury risk. However, previous prevention programs that include plyometrics use a variety of exercises with little justification of exercise inclusion. Because gluteal and hamstring activation is thought to be important for preventing knee injuries, the purpose of this study was to determine which commonly used plyometric exercises produce the greatest activation of the gluteals and hamstrings. EMG (Electromyography) amplitudes of the hamstring and gluteal muscles during preparatory and loading phases of landing were recorded in 41 subjects during 5 commonly used plyometric exercises. Repeated measures ANOVAs (Analysis of Variance) were used on 36 subjects to examine differences in muscle activation. Differences in hamstring (Pplyometric exercises, their removal from injury prevention programs may be warranted without affecting program efficacy. © 2013.

Optix: A Monte Carlo scintillation light transport code

Energy Technology Data Exchange (ETDEWEB)

Safari, M.J., E-mail: mjsafari@aut.ac.ir [Department of Energy Engineering and Physics, Amir Kabir University of Technology, PO Box 15875-4413, Tehran (Iran, Islamic Republic of); Afarideh, H. [Department of Energy Engineering and Physics, Amir Kabir University of Technology, PO Box 15875-4413, Tehran (Iran, Islamic Republic of); Ghal-Eh, N. [School of Physics, Damghan University, PO Box 36716-41167, Damghan (Iran, Islamic Republic of); Davani, F. Abbasi [Nuclear Engineering Department, Shahid Beheshti University, PO Box 1983963113, Tehran (Iran, Islamic Republic of)

2014-02-11

The paper reports on the capabilities of Monte Carlo scintillation light transport code Optix, which is an extended version of previously introduced code Optics. Optix provides the user a variety of both numerical and graphical outputs with a very simple and user-friendly input structure. A benchmarking strategy has been adopted based on the comparison with experimental results, semi-analytical solutions, and other Monte Carlo simulation codes to verify various aspects of the developed code. Besides, some extensive comparisons have been made against the tracking abilities of general-purpose MCNPX and FLUKA codes. The presented benchmark results for the Optix code exhibit promising agreements. -- Highlights: • Monte Carlo simulation of scintillation light transport in 3D geometry. • Evaluation of angular distribution of detected photons. • Benchmark studies to check the accuracy of Monte Carlo simulations.

A comparison of maximal exercise and dipyridamole thallium-201 planar gated scintigraphy

International Nuclear Information System (INIS)

Martin, W.; Tweddel, A.C.; Main, G.; Hutton, I.

1992-01-01

Both symptom-limited maximal exercise and intravenously given dipyridamole stress (0.56 mg/kg over 4 min with a 2 min walk) gated thallium scans were performed in 22 patients undergoing coronary arteriography for the assessment of chest pain. All scans were acquired gated to the electrocardiogram in 3 projections and were reported for the presence and extent of defects in 5 myocardial segments in each view. In addition, left and right ventricular myocardial uptake and estimates of right and left lung and liver to left ventricular uptake were assessed relative to the injected dose of thallium-201. Overall, 190/310 segments were abnormal with exercise compared with 169/310 with dipyridamole. Segments were scored greater in extent in 90/310 cases with exercise, compared with 46/310 in which the defect was more extensive with dipyridamole. Non-attenuation corrected percentage myocardial thallium uptakes were similar for both stresses. Left and right lung and liver to left ventricle ratios were all significantly higher with dipyridamole than with exercise. High right and left lung uptakes with dipyridamole were strongly correlated with high exercise values. The liver uptake was weakly correlated between the 2 different stress tests. These results demonstrate that dipyridamole induces fewer and less extensive thallium perfusion defects than maximal exercise, and that liver and lung to myocardial ratios are higher with dipyridamole than with exercise. (orig./MG)

Comparison of the effect of acupressure and pilates-based exercises on sleep quality of postmenopausal women: A randomized controlled trial

Directory of Open Access Journals (Sweden)

Maryam Ahmadinezhad

2017-01-01

Full Text Available Background: Postmenopausal women experience a variety of symptoms, among which sleep disorder is one of the most common problems. Acupressure and Pilates exercise programs are effective nonpharmaceutical treatments which can improve sleep quality. In the present study, we aimed to compare the effects of acupressure and Pilates-based exercises on the sleep quality of postmenopausal women referred to medical clinics. Materials and Methods: In this single-blinded randomized controlled clinical trial, we recruited 108 women aged 40–60 years who were randomly assigned into one control and two intervention groups using balanced block randomization method (three groups of 36 each. The patients in the Pilates exercise group participated in an exercise training program of three 1-hour sessions per week for 6 consecutive weeks. The participants of acupressure group received acupressure intervention three times a week for 6 weeks. The sleep quality of all participants was assessed and recorded using the Pittsburgh Sleep Quality Index (PSQI once before and once after the intervention. Results: The results showed no statistically significant difference among the three groups on the total scores of sleep quality after the intervention. The intragroup comparison revealed that the changes in the mean total scores were significant in both the intervention groups (P < 0.001 but not in the control group (P = 0.76. Conclusions: Pilates-based exercises and acupressure can effectively improve women's sleep quality. Both techniques can be applied as effective alternative and complementary methods for improving sleep quality during the postmenopausal period.

A GFR benchmark comparison of transient analysis codes based on the ETDR concept

International Nuclear Information System (INIS)

Bubelis, E.; Coddington, P.; Castelliti, D.; Dor, I.; Fouillet, C.; Geus, E. de; Marshall, T.D.; Van Rooijen, W.; Schikorr, M.; Stainsby, R.

2007-01-01

A GFR (Gas-cooled Fast Reactor) transient benchmark study was performed to investigate the ability of different code systems to calculate the transition in the core heat removal from the main circuit forced flow to natural circulation cooling using the Decay Heat Removal (DHR) system. This benchmark is based on a main blower failure in the Experimental Technology Demonstration Reactor (ETDR) with reactor scram. The codes taking part into the benchmark are: RELAP5, TRAC/AAA, CATHARE, SIM-ADS, MANTA and SPECTRA. For comparison purposes the benchmark was divided into several stages: the initial steady-state solution, the main blower flow run-down, the opening of the DHR loop and the transition to natural circulation and finally the 'quasi' steady heat removal from the core by the DHR system. The results submitted by the participants showed that all the codes gave consistent results for all four stages of the benchmark. In the steady-state the calculations revealed some differences in the clad and fuel temperatures, the core and main loop pressure drops and in the total Helium mass inventory. Also some disagreements were observed in the Helium and water flow rates in the DHR loop during the final natural circulation stage. Good agreement was observed for the total main blower flow rate and Helium temperature rise in the core, as well as for the Helium inlet temperature into the core. In order to understand the reason for the differences in the initial 'blind' calculations a second round of calculations was performed using a more precise set of boundary conditions

Reliability of cause of death coding: an international comparison.

Science.gov (United States)

Antini, Carmen; Rajs, Danuta; Muñoz-Quezada, María Teresa; Mondaca, Boris Andrés Lucero; Heiss, Gerardo

2015-07-01

This study evaluates the agreement of nosologic coding of cardiovascular causes of death between a Chilean coder and one in the United States, in a stratified random sample of death certificates of persons aged ≥ 60, issued in 2008 in the Valparaíso and Metropolitan regions, Chile. All causes of death were converted to ICD-10 codes in parallel by both coders. Concordance was analyzed with inter-coder agreement and Cohen's kappa coefficient by level of specification ICD-10 code for the underlying cause and the total causes of death coding. Inter-coder agreement was 76.4% for all causes of death and 80.6% for the underlying cause (agreement at the four-digit level), with differences by the level of specification of the ICD-10 code, by line of the death certificate, and by number of causes of death per certificate. Cohen's kappa coefficient was 0.76 (95%CI: 0.68-0.84) for the underlying cause and 0.75 (95%CI: 0.74-0.77) for the total causes of death. In conclusion, causes of death coding and inter-coder agreement for cardiovascular diseases in two regions of Chile are comparable to an external benchmark and with reports from other countries.

Upgrades to the WIMS-ANL code

International Nuclear Information System (INIS)

Woodruff, W. L.

1998-01-01

The dusty old source code in WIMS-D4M has been completely rewritten to conform more closely with current FORTRAN coding practices. The revised code contains many improvements in appearance, error checking and in control of the output. The output is now tabulated to fit the typical 80 column window or terminal screen. The Segev method for resonance integral interpolation is now an option. Most of the dimension limitations have been removed and replaced with variable dimensions within a compile-time fixed container. The library is no longer restricted to the 69 energy group structure, and two new libraries have been generated for use with the code. The new libraries are both based on ENDF/B-VI data with one having the original 69 energy group structure and the second with a 172 group structure. The common source code can be used with PCs using both Windows 95 and NT, with a Linux based operating system and with UNIX based workstations. Comparisons of this version of the code to earlier evaluations with ENDF/B-V are provided, as well as, comparisons with the new libraries

Upgrades to the WIMS-ANL code

International Nuclear Information System (INIS)

Woodruff, W.L.; Leopando, L.S.

1998-01-01

The dusty old source code in WIMS-D4M has been completely rewritten to conform more closely with current FORTRAN coding practices. The revised code contains many improvements in appearance, error checking and in control of the output. The output is now tabulated to fit the typical 80 column window or terminal screen. The Segev method for resonance integral interpolation is now an option. Most of the dimension limitations have been removed and replaced with variable dimensions within a compile-time fixed container. The library is no longer restricted to the 69 energy group structure, and two new libraries have been generated for use with the code. The new libraries are both based on ENDF/B-VI data with one having the original 69 energy group structure and the second with a 172 group structure. The common source code can be used with PCs using both Windows 95 and NT, with a Linux based operating system and with UNIX based workstations. Comparisons of this version of the code to earlier evaluations with ENDF/B-V are provided, as well as, comparisons with the new libraries. (author)

The Need to Support and Maintain Legacy Software: Ensuring Ongoing Support for the Isotopics Codes

International Nuclear Information System (INIS)

Weber, A.-L.; Funk, P.; McGinnis, B.; Vo, D.; Wang, T.-F.; Peerani, P.; Zsigrai, J.; )

2015-01-01

Since about four decades, gamma evaluation codes for plutonium and uranium isotope abundance measurements are a key component of international, regional and domestic safeguards inspections. However, the development of these codes still relies upon a very limited number of experts. This led the safeguards authorities to express concerns, and to request continuity of knowledge and maintenance capability for the codes. The presentation describes initiatives undertaken in the past ten years to ensure ongoing support for the isotopic codes. As a follow-up to the 2005 international workshop, the IAEA issued a roadmap for future developments of gamma codes, followed by a request for support in this field to several MSSP's (namely JNT A 01684). The international working group on gamma spectrometry techniques for U and Pu isotopics (IWG-GST) was launched by the European, French and US MSSPs in 2007, to respond to the needs expressed by the IAEA and other national or international inspectorates. Its activities started with the organization in 2008 of a workshop on gamma spectrometry analysis codes for U and Pu isotopics. The working group is currently developing an international database of reference spectra that will be made available to the community of users and developers. In parallel, IRSN contributes to the JNT A 01684 by advising the IAEA on establishing a procedure for validating a new version of isotopics codes compared to the previous version. The most recent initiative, proposed by the IAEA, consists in organizing an inter-comparison exercise to assess the performances of U and Pu isotopics and mass assay techniques based on medium resolution gamma spectrometry (MRGS). All these initiatives contributed to the continuity of knowledge and maintenance of the gamma isotopic codes, but further efforts are needed to ensure the long-term sustainability of the codes. (author)

RELAP5-3D Results for Phase I (Exercise 2) of the OECD/NEA MHTGR-350 MW Benchmark

Energy Technology Data Exchange (ETDEWEB)

Gerhard Strydom

2012-06-01

The coupling of the PHISICS code suite to the thermal hydraulics system code RELAP5-3D has recently been initiated at the Idaho National Laboratory (INL) to provide a fully coupled prismatic Very High Temperature Reactor (VHTR) system modeling capability as part of the NGNP methods development program. The PHISICS code consists of three modules: INSTANT (performing 3D nodal transport core calculations), MRTAU (depletion and decay heat generation) and a perturbation/mixer module. As part of the verification and validation activities, steady state results have been obtained for Exercise 2 of Phase I of the newly-defined OECD/NEA MHTGR-350 MW Benchmark. This exercise requires participants to calculate a steady-state solution for an End of Equilibrium Cycle 350 MW Modular High Temperature Reactor (MHTGR), using the provided geometry, material, and coolant bypass flow description. The paper provides an overview of the MHTGR Benchmark and presents typical steady state results (e.g. solid and gas temperatures, thermal conductivities) for Phase I Exercise 2. Preliminary results are also provided for the early test phase of Exercise 3 using a two-group cross-section library and the Relap5-3D model developed for Exercise 2.

Verification and Validation of the Tritium Transport Code TMAP7

International Nuclear Information System (INIS)

Longhurst, Glen R.; Ambrosek, James

2005-01-01

The TMAP code has been upgraded to version 7, which includes radioactive decay along with many features implemented in prior versions. Pursuant to acceptance and release for distribution, the code was exercised in a variety of problem types to demonstrate that it provides results in agreement with theoretical results for cases where those are available. It has also been used to model certain experimental results. In this paper, the capabilities of the TMAP7 code are demonstrated by presenting some of the results from the verification and validation process

Comparison of exercise and pharmacologic stress in myocardium perfusion imaging for CHD

International Nuclear Information System (INIS)

Li Zebo; Zheng Kangni; Cheng Xiaorui; Liu Hui; Cheng Yihai

1995-01-01

In order to provide a proper stress test, exercise, dipyridamole and ATP stress were compared. Three modalities were compared with respect to the detecting rate, methodology, hemodynamic and side effects. There are no significant differences in their ability of detecting coronary heart disease (CHD) (P>0.05). Exercise stress causes an increase in heart rate, blood pressure and myocardium oxygen consumption. Pharmacologic stress cause a slight increase in heart rate, but a decrease in blood pressure (P<0.01). Exercise stress is a basic method with good image quality, but it needs a special equipment. Pharmacologic stress is an easier, cheaper and safer method, particularly useful for patients unable to perform exercise test

Genome-wide identification of coding and non-coding conserved sequence tags in human and mouse genomes

Directory of Open Access Journals (Sweden)

Maggi Giorgio P

2008-06-01

Full Text Available Abstract Background The accurate detection of genes and the identification of functional regions is still an open issue in the annotation of genomic sequences. This problem affects new genomes but also those of very well studied organisms such as human and mouse where, despite the great efforts, the inventory of genes and regulatory regions is far from complete. Comparative genomics is an effective approach to address this problem. Unfortunately it is limited by the computational requirements needed to perform genome-wide comparisons and by the problem of discriminating between conserved coding and non-coding sequences. This discrimination is often based (thus dependent on the availability of annotated proteins. Results In this paper we present the results of a comprehensive comparison of human and mouse genomes performed with a new high throughput grid-based system which allows the rapid detection of conserved sequences and accurate assessment of their coding potential. By detecting clusters of coding conserved sequences the system is also suitable to accurately identify potential gene loci. Following this analysis we created a collection of human-mouse conserved sequence tags and carefully compared our results to reliable annotations in order to benchmark the reliability of our classifications. Strikingly we were able to detect several potential gene loci supported by EST sequences but not corresponding to as yet annotated genes. Conclusion Here we present a new system which allows comprehensive comparison of genomes to detect conserved coding and non-coding sequences and the identification of potential gene loci. Our system does not require the availability of any annotated sequence thus is suitable for the analysis of new or poorly annotated genomes.

Experience with COSYMA in an international intercomparison of probabilistic accident consequence assessment codes

International Nuclear Information System (INIS)

Hasemann, I.; Jones, J.A.; Steen, J. van der; Wonderen, E. van

1996-01-01

The Commission of the European Communities and the Nuclear Energy Agency of the OECD have organized an international exercise to compare the predictions of accident consequence assessment codes, and to identify those features of the models which lead to differences in the predicted results. Alongside this, a further exercise was undertaken in which the COSYMA code was used independently by several different organizations. Some of the findings of the COSYMA users' exercise are described that have general applications to accident consequence assessments. A number of areas are identified in which further work on accident consequence models may be justified. These areas, which are also of interest for codes other than COSYMA, are (a) the calculation and averaging of doses and risks to people sheltered in different types of buildings, particularly with respect to the evaluation of early health effects; (b) the modeling of long-duration releases and their description as a series of shorter releases; (c) meteorological sampling for results at a certain location, specifically for use with trajectory models of atmospheric dispersion; and (d) aspects of calculating probabilities of consequences at a point

Sensitivity Study of Regional TDC in MATRA-S code Using PSBT Benchmark Exercise

International Nuclear Information System (INIS)

Kim, Seong Jin; Cha, Jeong Hun; Seo, Kyong Won; Kwon, Hyuk; Hwang, Dae Hyun

2012-01-01

In the sub-channel analysis code, the modeling of interchannel exchanges between adjacent sub-channels expressed as diversion cross flow, turbulent mixing and so on. The turbulent mixing in MATRA-S code is considered as TDC( β : thermal diffusion coefficient). The TDC becomes different according to the bundle, grid type, mixing vane, and so on. Generally, the thermal mixing test is conducted to optimize the TDC. In the OECD/NRC PSBT benchmark, the thermal mixing test was conducted and the optimized TDC was analyzed using MATRA-S code. It was shown that the exit temperature distribution of MATRA-S code was different from an experimental result even though the optimized TDC was applied to the code. In this study, concept of the regional TDC was introduced and sensitivity analysis of the regional TDC was presented

Sample problem manual for benchmarking of cask analysis codes

International Nuclear Information System (INIS)

Glass, R.E.

1988-02-01

A series of problems have been defined to evaluate structural and thermal codes. These problems were designed to simulate the hypothetical accident conditions given in Title 10 of the Code of Federal Regulation, Part 71 (10CFR71) while retaining simple geometries. This produced a problem set that exercises the ability of the codes to model pertinent physical phenomena without requiring extensive use of computer resources. The solutions that are presented are consensus solutions based on computer analyses done by both national laboratories and industry in the United States, United Kingdom, France, Italy, Sweden, and Japan. The intent of this manual is to provide code users with a set of standard structural and thermal problems and solutions which can be used to evaluate individual codes. 19 refs., 19 figs., 14 tabs

Exercise motivation and nonspecific back pain: A comparison of patients and nonpatients.

Science.gov (United States)

Kleinert, Jens; Ott, Ida; Mierswa, Tobias; Levenig, Claudia G; Wenge, Kerstin; Hasenbring, Monika; Kellmann, Michael

2017-08-01

Motivation is a key variable to consider during exercise or exercise therapy of individuals with back pain. Based on organismic integration theory, this study aims to improve the understanding of exercise motivation in patients and nonpatients by evaluating the relationships between typical motivational profiles and personal characteristics, therapy parameters and pain related variables. One hundred nine women and 145 men with back pain (mean age 33.3 years; 31.9% currently under the care of a physician) involved in some kind of exercise for current nonspecific back pain voluntarily participated in this study. An adapted version of the Behavioral Regulation in Sport Questionnaire was used to measure exercise motivation. Furthermore, data on pain, disability status, level of sport activity, body concept, and the type of treatment or exercise were gathered. Autonomous forms of regulation were most prevalent among subjects. Of 4 motivational profiles found, 2 showed a positive pattern (29.1% highly motivated individuals, 21.7% autonomously convinced individuals), and 2 showed a more negative pattern (19.7% controlled convinced individuals, 29.5% less motivated individuals). Relationships between profiles and age, body concept, involvement in sport competition, and type of exercise were found. The different motivational profiles respectively reveal specific practical relevance. In particular, the controlled convinced pattern is supposed to be more maladaptive than all other profiles. The insights provided by this study supports the development of motivation-oriented treatments based on the assessment of individuals' motivational profiles. (PsycINFO Database Record (c) 2017 APA, all rights reserved).

Evaluating the break flow for the 100% DVI line break accident of ATLAS using the RELAP5/MOD3.3 code

Energy Technology Data Exchange (ETDEWEB)

Lee, Suk Ho; You, Sung Chang; Kim, Han Gon [Korea Hydro and Nuclear Power Co., Daejeon (Korea, Republic of)

2010-10-15

An integral effect test database for major design basis accidents using the Advanced Test Loop for Accident Simulation (ATLAS) facility has been compiled by the Korea Atomic Energy Research Institute (KAERI). In order to effectively utilize the database, the Domestic Standard Problem (DSP) exercise was proposed and launched in 2009. As the first DSP exercise, scenario involving a 100% break of the DVI nozzle was determined by considering its technical importance including such phenomena as the break flow, loop seal clearing. The first DSP exercise was performed in an open calculation environment. Thus, integral effect test data were opened to the participants prior to code calculations. Ten domestic organizations including members of nuclear industry, a research institute, and universities participated in the DSP exercise using various best-estimate safety analysis codes and finally presented their code prediction results, comparing them to the experimental data. This paper presents the analysis results performed by NETEC as one of the first DSP exercise participants. This analysis focuses on the break flow phenomena and modeling

The METEOR/TRANSURANUS fuel performance code

International Nuclear Information System (INIS)

Struzik, C.; Guerin, Y.

1996-01-01

The first calculations for the FUMEX exercise were performed using version 1.1 of the METEOR/TRANSURANUS code. Since then, important improvements have been implemented on several models. In its present state, the code describes fuel rod behaviour in standard PWR conditions. Its validity extends to UO 2 and MOX fuels clad in Zircaloy-4. Power transient calculations for UO 2 and Gd doped fuel calculations are possible, but further developments are in progress, and the applications will be fully qualified in version 2.0. A considerable effort is made to replace semi-empirical models with models that have a sounder physical basis. (authors). 14 refs

Exercise motivation and barriers among men and women of different ...

African Journals Online (AJOL)

Exercise motivation and barriers among men and women of different age groups. ... The motives changed when comparisons were made between different age and gender groups. ... Common barriers for exercise included 'lack of time', focus on 'other priorities', the perception that 'daily routine ... HOW TO USE AJOL.

Perceived exercise benefits and barriers among power wheelchair soccer players.

Science.gov (United States)

Barfield, J P; Malone, Laurie A

2013-01-01

Lack of exercise is a major risk factor for secondary conditions among persons dependent upon motorized wheelchairs. Power wheelchair soccer is a unique exercise opportunity for this population, and understanding factors that influence exercise decision-making is necessary for clinicians to help those in motorized chairs reduce their secondary risk. Therefore, this study examined differences in perceived benefits and barriers to exercise among power wheelchair soccer players using a mixed-methods analysis. The most common perceived benefit to exercise was "Exercising lets me have contact with friends and persons I enjoy." Post hoc comparisons of quantitative data indicated that persons with muscular dystrophy perceived exercise to be significantly less important than did other disability groups (p Exercise is hard work for me," "Exercise tires me," and "There are too few places for me to exercise" were the most common perceived barriers. These findings can assist with development of exercise opportunities for power wheelchair users.

Biomechanical Modeling Analysis of Loads Configuration for Squat Exercise

Science.gov (United States)

Gallo, Christopher A.; Thompson, William K.; Lewandowski, Beth E.; Jagodnik, Kathleen; De Witt, John K.

2017-01-01

INTRODUCTION: Long duration space travel will expose astronauts to extended periods of reduced gravity. Since gravity is not present to assist loading, astronauts will use resistive and aerobic exercise regimes for the duration of the space flight to minimize loss of bone density, muscle mass and aerobic capacity that occurs during exposure to a reduced gravity environment. Unlike the International Space Station (ISS), the area available for an exercise device in the next generation of spacecraft for travel to the Moon or to Mars is limited and therefore compact resistance exercise device prototypes are being developed. The Advanced Resistive Exercise Device (ARED) currently on the ISS is being used as a benchmark for the functional performance of these new devices. Biomechanical data collection and computational modeling aid the device design process by quantifying the joint torques and the musculoskeletal forces that occur during exercises performed on the prototype devices. METHODS The computational models currently under development utilize the OpenSim [1] software platform, consisting of open source code for musculoskeletal modeling, using biomechanical input data from test subjects for estimation of muscle and joint loads. The OpenSim Full Body Model [2] is used for all analyses. The model incorporates simplified wrap surfaces, a new knee model and updated lower body muscle parameters derived from cadaver measurements and magnetic resonance imaging of young adults. The upper body uses torque actuators at the lumbar and extremity joints. The test subjects who volunteer for this study are instrumented with reflective markers for motion capture data collection while performing squat exercising on the Hybrid Ultimate Lifting Kit (HULK) prototype device (ZIN Technologies, Middleburg Heights, OH). Ground reaction force data is collected with force plates under the feet, and device loading is recorded through load cells internal to the HULK. Test variables include

High-Intensity Interval Exercises' Acute Impact on Heart Rate Variability: Comparison Between Whole-Body and Cycle Ergometer Protocols.

Science.gov (United States)

Schaun, Gustavo Z; Del Vecchio, Fabrício B

2018-01-01

Schaun, GZ and Del Vecchio, FB. High-intensity interval exercises' acute impact on heart rate variability: comparison between whole-body and cycle ergometer protocols. J Strength Cond Res 32(1): 223-229, 2018-Study aimed to compare the effects of 2 high-intensity interval training (HIIT) protocols on heart rate variability. Twelve young adult males (23.3 ± 3.9 years, 177.8 ± 7.4 cm, 76.9 ± 12.9 kg) volunteered to participate. In a randomized cross-over design, subjects performed 2 HIIT protocols, 1 on a cycle ergometer (Tabata protocol [TBT]; eight 20-second bouts at 170% Pmax interspersed by 10-second rest) and another with whole-body calisthenic exercises (McRae protocol; eight 20-second all-out intervals interspersed by 10-second rest). Heart rate variability outcomes in the time, frequency, and nonlinear domains were assessed on 3 moments: (a) presession; (b) immediately postsession; and (c) 24 hours postsession. Results revealed that RRmean, Ln rMSSD, Ln high frequency (HF), and Ln low frequency (LF) were significantly reduced immediately postsession (p ≤ 0.001) and returned to baseline 24 h after both protocols. In addition, LF/HF ratio was reduced 24 h postsession (p ≤ 0.01) and SD2 was significantly lower immediately postsession only in TBT. Our main finding was that responses from heart rate autonomic control were similar in both protocols, despite different modes of exercise performed. Specifically, exercises resulted in a high parasympathetic inhibition immediately after session with subsequent recovery within 1 day. These results suggest that subjects were already recovered the day after and can help coaches to better program training sessions with such protocols.

Translation of ARAC computer codes

International Nuclear Information System (INIS)

Takahashi, Kunio; Chino, Masamichi; Honma, Toshimitsu; Ishikawa, Hirohiko; Kai, Michiaki; Imai, Kazuhiko; Asai, Kiyoshi

1982-05-01

In 1981 we have translated the famous MATHEW, ADPIC and their auxiliary computer codes for CDC 7600 computer version to FACOM M-200's. The codes consist of a part of the Atmospheric Release Advisory Capability (ARAC) system of Lawrence Livermore National Laboratory (LLNL). The MATHEW is a code for three-dimensional wind field analysis. Using observed data, it calculates the mass-consistent wind field of grid cells by a variational method. The ADPIC is a code for three-dimensional concentration prediction of gases and particulates released to the atmosphere. It calculates concentrations in grid cells by the particle-in-cell method. They are written in LLLTRAN, i.e., LLNL Fortran language and are implemented on the CDC 7600 computers of LLNL. In this report, i) the computational methods of the MATHEW/ADPIC and their auxiliary codes, ii) comparisons of the calculated results with our JAERI particle-in-cell, and gaussian plume models, iii) translation procedures from the CDC version to FACOM M-200's, are described. Under the permission of LLNL G-Division, this report is published to keep the track of the translation procedures and to serve our JAERI researchers for comparisons and references of their works. (author)

Validation of One-Dimensional Module of MARS-KS1.2 Computer Code By Comparison with the RELAP5/MOD3.3/patch3 Developmental Assessment Results

International Nuclear Information System (INIS)

Bae, S. W.; Chung, B. D.

2010-07-01

This report records the results of the code validation for the one-dimensional module of the MARS-KS thermal hydraulics analysis code by means of result-comparison with the RELAP5/MOD3.3 computer code. For the validation calculations, simulations of the RELAP5 Code Developmental Assessment Problem, which consists of 22 simulation problems in 3 categories, have been selected. The results of the 3 categories of simulations demonstrate that the one-dimensional module of the MARS code and the RELAP5/MOD3.3 code are essentially the same code. This is expected as the two codes have basically the same set of field equations, constitutive equations and main thermal hydraulic models. The result suggests that the high level of code validity of the RELAP5/MOD3.3 can be directly applied to the MARS one-dimensional module

RENEB accident simulation exercise.

Science.gov (United States)

Brzozowska, Beata; Ainsbury, Elizabeth; Baert, Annelot; Beaton-Green, Lindsay; Barrios, Leonardo; Barquinero, Joan Francesc; Bassinet, Celine; Beinke, Christina; Benedek, Anett; Beukes, Philip; Bortolin, Emanuela; Buraczewska, Iwona; Burbidge, Christopher; De Amicis, Andrea; De Angelis, Cinzia; Della Monaca, Sara; Depuydt, Julie; De Sanctis, Stefania; Dobos, Katalin; Domene, Mercedes Moreno; Domínguez, Inmaculada; Facco, Eva; Fattibene, Paola; Frenzel, Monika; Monteiro Gil, Octávia; Gonon, Géraldine; Gregoire, Eric; Gruel, Gaëtan; Hadjidekova, Valeria; Hatzi, Vasiliki I; Hristova, Rositsa; Jaworska, Alicja; Kis, Enikő; Kowalska, Maria; Kulka, Ulrike; Lista, Florigio; Lumniczky, Katalin; Martínez-López, Wilner; Meschini, Roberta; Moertl, Simone; Moquet, Jayne; Noditi, Mihaela; Oestreicher, Ursula; Orta Vázquez, Manuel Luis; Palma, Valentina; Pantelias, Gabriel; Montoro Pastor, Alegria; Patrono, Clarice; Piqueret-Stephan, Laure; Quattrini, Maria Cristina; Regalbuto, Elisa; Ricoul, Michelle; Roch-Lefevre, Sandrine; Roy, Laurence; Sabatier, Laure; Sarchiapone, Lucia; Sebastià, Natividad; Sommer, Sylwester; Sun, Mingzhu; Suto, Yumiko; Terzoudi, Georgia; Trompier, Francois; Vral, Anne; Wilkins, Ruth; Zafiropoulos, Demetre; Wieser, Albrecht; Woda, Clemens; Wojcik, Andrzej

2017-01-01

The RENEB accident exercise was carried out in order to train the RENEB participants in coordinating and managing potentially large data sets that would be generated in case of a major radiological event. Each participant was offered the possibility to activate the network by sending an alerting email about a simulated radiation emergency. The same participant had to collect, compile and report capacity, triage categorization and exposure scenario results obtained from all other participants. The exercise was performed over 27 weeks and involved the network consisting of 28 institutes: 21 RENEB members, four candidates and three non-RENEB partners. The duration of a single exercise never exceeded 10 days, while the response from the assisting laboratories never came later than within half a day. During each week of the exercise, around 4500 samples were reported by all service laboratories (SL) to be examined and 54 scenarios were coherently estimated by all laboratories (the standard deviation from the mean of all SL answers for a given scenario category and a set of data was not larger than 3 patient codes). Each participant received training in both the role of a reference laboratory (activating the network) and of a service laboratory (responding to an activation request). The procedures in the case of radiological event were successfully established and tested.

Fast comparison of IS radar code sequences for lag profile inversion

Directory of Open Access Journals (Sweden)

M. S. Lehtinen

2008-08-01

Full Text Available A fast method for theoretically comparing the posteriori variances produced by different phase code sequences in incoherent scatter radar (ISR experiments is introduced. Alternating codes of types 1 and 2 are known to be optimal for selected range resolutions, but the code sets are inconveniently long for many purposes like ground clutter estimation and in cases where coherent echoes from lower ionospheric layers are to be analyzed in addition to standard F-layer spectra.

The method is used in practice for searching binary code quads that have estimation accuracy almost equal to that of much longer alternating code sets. Though the code sequences can consist of as few as four different transmission envelopes, the lag profile estimation variances are near to the theoretical minimum. Thus the short code sequence is equally good as a full cycle of alternating codes with the same pulse length and bit length. The short code groups cannot be directly decoded, but the decoding is done in connection with more computationally expensive lag profile inversion in data analysis.

The actual code searches as well as the analysis and real data results from the found short code searches are explained in other papers sent to the same issue of this journal. We also discuss interesting subtle differences found between the different alternating codes by this method. We assume that thermal noise dominates the incoherent scatter signal.

Exercise applications of the programme package OECOSYS 1999

International Nuclear Information System (INIS)

Mueck, K.; Sdouz, G.; Suda, M.

1999-10-01

Under contract to the Austrian Federal Chancellory, directorate VI, the radioecological prediction code OECOSYS was implemented by the Austrian Research Center Seibersdorf on a VAX computer using VAX Fortran in 1989. Successively, in 1992 the program OECOSYS was implemented - in the version of 1989 - on PC's in Seibersdorf and the Ministry using OS/2 and Microsoft-Fortran. In 1993, an update of data sets and program structures which had become necessary by new data and improvements in modelling, was realized for the same customer. In 1998 the new version of the code in form of an EXCEL-version under MS Windows 95 was installed and adapted according to the Austrian parameters. With this version the calculation of two test scenarios in the context of the emergency exercise Hollabrunn was performed. They comprised an accident scenario in the NPP Dukovany. The assumption for the exercise was a severe accident with the failure of all cooling systems and furthermore the failure of the sprinkler system and the barbotage system after 1 hour. The assumptions were independent of the credibility of the accident scenarios with the aim of creating a useful exercise scenario. Two prognosis calculations were performed, one assuming completely dry deposition and one assuming a predominantly wet deposition. (author)

Comparison the effects of one session aerobic exercise and resistance training on some of the coagulation markers of healthy young women

Directory of Open Access Journals (Sweden)

Masoumeh Habibian

2010-11-01

Full Text Available Background: Physical training is a useful method to reduce disease of cardiovascular, but the effect of exercise on the coagulation system is under investigation. The aim of this study was to determine the response of one bout exhaustive aerobic exercise and resistance training on some of coagulation markers in healthy young women.Materials and Method: This quasi-experimental research was performed in 2009. Twenty trained volunteer female students of physical education Sari Azad university were selected objectively and availability. The subjects were randomly divided into two groups of aerobic (n=10 and resistance training (n=10. Aerobic group performed an exhaustive workout program on treadmill intensity 65 to75% Vo2max on treadmill. The resistance group completed three sets of 5-7 repetitions of six exercises at an intensity corresponding to 80% of 1RM. Following 12 to 14 hours of nightly fasting, venous blood samples (5 cc were collected pre, immediately after exercise and after 60 min of recovery and analyzed for PT, aPTT and fibrinogen. Participants were matched according to anthropometric measurements, age and Vo2max. Hypothesizes were tested by using independent t, repeated measures and post-hoc test (p 0.05. Results: Both the aerobic and resistance training groups, PT time (p<0.001 and aPTT time significantly decreased (p=0.006, p<0.001 respectively times between the two groups and the effect of resistant training on fibrinogen level immediately after exercise. Also aPTT time higher increased after recovery in comparison with baseline levels in aerobic (p=0.006 and resistance training groups (p<0.001. There were no significant differences in PT and aPTT was higher than aerobic training (p=0.0035.Conclusion: The results show that both of acute aerobic and or anaerobic exercise lead to small and transit coagulation system and increase in coagulation times

EFFECTIVENESS OF FLOOR EXERCISES VERSES BALL EXERCISES ON SPINAL MOBILITY IN SPASTIC DIPLEGIC

Directory of Open Access Journals (Sweden)

Sumitra Sakhawalkar

2017-04-01

Full Text Available Background: The objective of this present study was to determine the Effectiveness of Floor Exercises versus Ball Exercises on spinal mobility in Spastic Diplegic. Methods: Institutional ethical committee permission was taken before starting the study. A sample of 70 Diplegic CP children was screened, and 40 meeting the inclusion criteria were selected for study were then randomly divided into two groups one control other experimental i.e. 20 in each group by chit method. Both the groups were assessed with spinal goniometry using Tape measurements for Thoracolumbar spine and Modified Schober's Test (MMSTbefore and after the treatment. Control group were given Floor exercise on a mat, and Swiss ball was giving experimental group Ball exercises for ten repetitions with 10-second hold, treatment time was 40 min per session for 3days per week for six weeks. Same sustained stretching technique for both groups in bilateral lower extremities for ten repetitions with 30 sec hold was given for, TA, Iliopsoas, Hamstrings, Hip Adductor, Rectus femoris. Result: Significant improvement was noted in the Intra-group comparison of both the groups from baseline to post six weeks of intervention p-value 0.001*** in both groups, and the Intergroup analysis using with tape measurements for Thoracolumbar spine (p-value and MMST (p-value 0.133NS. Conclusion: The present study concludes that there is a similar effect of both Floor Exercises versus Ball Exercises on spinal mobility in Spastic Diplegic.

Status of the CONTAIN computer code for LWR containment analysis

International Nuclear Information System (INIS)

Bergeron, K.D.; Murata, K.K.; Rexroth, P.E.; Clauser, M.J.; Senglaub, M.E.; Sciacca, F.W.; Trebilcock, W.

1983-01-01

The current status of the CONTAIN code for LWR safety analysis is reviewed. Three example calculations are discussed as illustrations of the code's capabilities: (1) a demonstration of the spray model in a realistic PWR problem, and a comparison with CONTEMPT results; (2) a comparison of CONTAIN results for a major aerosol experiment against experimental results and predictions of the HAARM aerosol code; and (3) an LWR sample problem, involving a TMLB' sequence for the Zion reactor containment

Status of the CONTAIN computer code for LWR containment analysis

International Nuclear Information System (INIS)

Bergeron, K.D.; Murata, K.K.; Rexroth, P.E.; Clauser, M.J.; Senglaub, M.E.; Sciacca, F.W.; Trebilcock, W.

1982-01-01

The current status of the CONTAIN code for LWR safety analysis is reviewed. Three example calculations are discussed as illustrations of the code's capabilities: (1) a demonstration of the spray model in a realistic PWR problem, and a comparison with CONTEMPT results; (2) a comparison of CONTAIN results for a major aerosol experiment against experimental results and predictions of the HAARM aerosol code; and (3) an LWR sample problem, involving a TMLB' sequence for the Zion reactor containment

OPAL reactor calculations using the Monte Carlo code serpent

Energy Technology Data Exchange (ETDEWEB)

Ferraro, Diego; Villarino, Eduardo [Nuclear Engineering Dept., INVAP S.E., Rio Negro (Argentina)

2012-03-15

In the present work the Monte Carlo cell code developed by VTT Serpent v1.1.14 is used to model the MTR fuel assemblies (FA) and control rods (CR) from OPAL (Open Pool Australian Light-water) reactor in order to obtain few-group constants with burnup dependence to be used in the already developed reactor core models. These core calculations are performed using CITVAP 3-D diffusion code, which is well-known reactor code based on CITATION. Subsequently the results are compared with those obtained by the deterministic calculation line used by INVAP, which uses the Collision Probability Condor cell-code to obtain few-group constants. Finally the results are compared with the experimental data obtained from the reactor information for several operation cycles. As a result several evaluations are performed, including a code to code cell comparison at cell and core level and calculation-experiment comparison at core level in order to evaluate the Serpent code actual capabilities. (author)

Gap Conductance model Validation in the TASS/SMR-S code using MARS code

International Nuclear Information System (INIS)

Ahn, Sang Jun; Yang, Soo Hyung; Chung, Young Jong; Lee, Won Jae

2010-01-01

Korea Atomic Energy Research Institute (KAERI) has been developing the TASS/SMR-S (Transient and Setpoint Simulation/Small and Medium Reactor) code, which is a thermal hydraulic code for the safety analysis of the advanced integral reactor. An appropriate work to validate the applicability of the thermal hydraulic models within the code should be demanded. Among the models, the gap conductance model which is describes the thermal gap conductivity between fuel and cladding was validated through the comparison with MARS code. The validation of the gap conductance model was performed by evaluating the variation of the gap temperature and gap width as the changed with the power fraction. In this paper, a brief description of the gap conductance model in the TASS/SMR-S code is presented. In addition, calculated results to validate the gap conductance model are demonstrated by comparing with the results of the MARS code with the test case

Women's anxiety about social and exercise settings.

Science.gov (United States)

Walton, Vicki R; Finkenberg, Mel E

2002-04-01

This study involved a comparison of social physique anxiety, assessed through the application of a modified version of the Social Physique Anxiety Scale, with 28 women who were new members exercising at all-female facilities compared to 43 new female members exercising at coeducational facilities. Analyses indicated there were no significant differences in means between the groups. The scores of women attending all-female facilities were significantly more influenced by the sex of members when choosing a facility.

Children-Adult Comparisons of VO2 and HR Kinetics during Submaximum Exercise.

Science.gov (United States)

Sady, Stanley P.; And Others

1983-01-01

Oxygen uptake and heart rate kinetics for submaximum exercise (bicycle riding) were compared in prepubescent boys and adult men. Resulting data suggest that children and adults do not differ significantly in cardiorespiratory adjustments during low-intensity exercise. (Authors/PP)

The effect of weight-bearing exercise and non-weight-bearing exercise on gait in rats with sciatic nerve crush injury.

Science.gov (United States)

Kim, Ki-Hyun; Hwangbo, Gak; Kim, Seong-Gil

2015-04-01

[Purpose] The purpose of this study was to access the effect of weight bearing exercise (treadmill exercise) and non-weight-bearing exercise (swimming exercise) on gait in the recovery process after a sciatic nerve crush injury. [Subjects and Methods] Rats were randomly divided into a swimming group (n=3) with non-weight-bearing exercise after a sciatic nerve crush and a treadmill group (n=3) with weight bearing exercise after a sciatic nerve crush. Dartfish is a program that can analyze and interpret motion through video images. The knee lateral epicondyle, lateral malleolus, and metatarsophalangeal joint of the fifth toe were marked by black dots before recording. [Results] There were significant differences in TOK (knee angle toe off) and ICK (knee angle at initial contact) in the swimming group and in TOK, ICA (ankle angle at initial contact), and ICK in the treadmill group. In comparison between groups, there were significant differences in TOA (ankle angle in toe off) and ICA at the 7th day. [Conclusion] There was no difference between weight bearing and non-weight-bearing exercise in sciatic nerve damage, and both exercises accelerated the recovery process in this study.

A Comparison of Nuclear Power Plant Simulator with RELAP5/MOD3 code about Steam Generator Tube Rupture

International Nuclear Information System (INIS)

Kim, Sung Hyun; Moon, Chan Ki; Park, Sung Baek; Na, Man Gyun

2013-01-01

The RELAP5/MOD3 code introduced in cooperation with U. S. NRC has been utilized mainly for validation calculation of accident analysis submitted by licensee in Korea. The Korea Institute of Nuclear Safety has built a verification system of LWR accident analysis with RELAP5/MOD3 code engine. Therefore, the simulator replicates the design basis accident and its results are compared with RELAP5/MOD3 code results that will have important implications in the verification of the simulator in the future. The SGTR simulations were performed by the simulator and its results were compared with ones by RELAP5/MOD3 code in this study. Thus, the results of this study can be used as materials to build the verification system of the nuclear power plant simulator. We tried to compare with RELAP5/MOD3 verification code by replicating major parameters of steam generator tube rupture using the simulator for OPR-1000 in Yonggwang training center. By comparing the changes in temperature, pressure and inventory of the reactor coolant system and main steam system during the SGTR, it was confirmed that the main behaviors of SGTR which the simulator and RELAP5/MOD3 code showed are similar. However, the behavior of SG pressure and level that are important parameters to diagnose the accident were a little different. We estimated that RELAP5/MOD3 code was not reflected the major control systems in detail, such as FWCS, SBCS and PPCS. The different behaviors of SG level and pressure in this study should be needed an additional review. As a result of the comparison, the major simulation parameters behavior by RELAP5/MOD3 code agreed well with the one by the simulator. Therefore, it is thought that RELAP5/MOD3 code is used as a tool for validation of NPP simulator in the near future through this study

Exercisers' identities and exercise dependence: the mediating effect of exercise commitment.

Science.gov (United States)

Lu, Frank Jing-Horng; Hsu, Eva Ya-Wen; Wang, Junn-Ming; Huang, Mei-Yao; Chang, Jo-Ning; Wang, Chien-Hsin

2012-10-01

The purpose of this study was to examine the associations of exercise identity, exercise commitment, exercise dependence, and, particularly, the mediating effects of exercise commitment on the relationship between exercise identity and exercise dependence. 253 Taiwanese regular exercisers completed measures, including the Exercise Dependence Scale-Revised, the Exercise Identity Scale, the Exercise Commitment Scale, and the Godin Leisure Time Exercise Questionnaire. Results showed that exercise identity, exercise dependence, and two types of exercise commitment were moderately to highly correlated. Furthermore, structural equation modelling indicated that a "have to" commitment partially mediated the relationship between exercise identity and exercise dependence. Based on the mediating role of a "have to" commitment, the findings are particularly informative to exercise instructors and for exercise program managers.

A Comparative Study on Seismic Analysis of Bangladesh National Building Code (BNBC) with Other Building Codes

Science.gov (United States)

Bari, Md. S.; Das, T.

2013-09-01

Tectonic framework of Bangladesh and adjoining areas indicate that Bangladesh lies well within an active seismic zone. The after effect of earthquake is more severe in an underdeveloped and a densely populated country like ours than any other developed countries. Bangladesh National Building Code (BNBC) was first established in 1993 to provide guidelines for design and construction of new structure subject to earthquake ground motions in order to minimize the risk to life for all structures. A revision of BNBC 1993 is undergoing to make this up to date with other international building codes. This paper aims at the comparison of various provisions of seismic analysis as given in building codes of different countries. This comparison will give an idea regarding where our country stands when it comes to safety against earth quake. Primarily, various seismic parameters in BNBC 2010 (draft) have been studied and compared with that of BNBC 1993. Later, both 1993 and 2010 edition of BNBC codes have been compared graphically with building codes of other countries such as National Building Code of India 2005 (NBC-India 2005), American Society of Civil Engineering 7-05 (ASCE 7-05). The base shear/weight ratios have been plotted against the height of the building. The investigation in this paper reveals that BNBC 1993 has the least base shear among all the codes. Factored Base shear values of BNBC 2010 are found to have increased significantly than that of BNBC 1993 for low rise buildings (≤20 m) around the country than its predecessor. Despite revision of the code, BNBC 2010 (draft) still suggests less base shear values when compared to the Indian and American code. Therefore, this increase in factor of safety against the earthquake imposed by the proposed BNBC 2010 code by suggesting higher values of base shear is appreciable.

Comparison of exercise stress testing with dobutamine stress echocardiography and exercise technetium-99m isonitrile single photon emission computerized tomography for diagnosis of coronary artery disease

International Nuclear Information System (INIS)

Oguzhan, A.; Kisacik, H.L.; Ozdemir, K.

1997-01-01

To compare the value of exercise electrocardiography with dobutamine stress echocardiography and exercise technetium-99m isonitrile single-photon emission computed tomography for coronary artery disease, 70 patients with either suspected or proven coronary artery disease underwent dobutamine stress echocardiography, exercise technetium-99m isonitrile single-photon emission computed tomography (mibi-SPECT) and treadmill exercise electrocardiography (ECG). Dobutamine echocardiography and exercise mibi-SPECT revealed a higher overall sensitivity than exercise testing (90 vs 57%, p 0.05; 90 and 62% p<0.05, respectively) but the difference between dobutamine stress echocardiography and exercise mibi-SPECT was not statistically significant. Diagnostic accuracy of dobutamine stress echocardiography and exercise mibi-SPECT was higher than that of exercise testing (90 vs 59%, p<0.001; 89 vs 59%, p<0.001, respectively). Dobutamine stress echocardiography and exercise mibi-SPECT have superiority over exercise testing in the diagnosis of coronary artery disease and dobutamine stress echocardiography is an alternative for exercise mibi-SPECT. (author)

Smiles count but minutes matter: responses to classroom exercise breaks.

Science.gov (United States)

Howie, Erin K; Newman-Norlund, Roger D; Pate, Russell R

2014-09-01

To determine the subjective responses of teachers and students to classroom exercise breaks, and how responses varied by duration. This mixed-methods experimental study included focus groups with teachers (N = 8) and 4(th)- and 5(th)-grade students (N = 96). Students participated in 5-, 10-, and 20-minute exercise breaks and 10 minutes of sedentary activity. In an additional exploratory analysis, video-tapes of each condition were coded and compared for positive affect. Students and teachers discussed multiple benefits, but teachers discussed barriers to implementing regular breaks of 5-minutes or more. Students exhibited higher positive affect during each exercise condition. Classroom exercise breaks are an enjoyable way to increase physical activity, but additional support may be needed to encourage teachers to implement breaks of 5 minutes or longer.

Motivation and perceived competence for healthy eating and exercise among overweight/obese adolescents in comparison to normal weight adolescents.

Science.gov (United States)

Mokhtari, Suzanne; Grace, Benjamin; Pak, Youngju; Reina, Astrid; Durand, Quinn; Yee, Jennifer K

2017-01-01

The current literature on determinants of behavior change in weight management lacks sufficient studies on type of motivation among children/adolescents, on perceived competence, and in relation to healthy eating. This study aimed to investigate type of motivation and levels of perceived competence for healthy diet and exercise, as well as general self efficacy among adolescents. We hypothesized that overweight/obese adolescents would demonstrate lower autonomous motivation and perceived competence regarding diet and exercise, and lower self-efficacy in general, and that the scores would be influenced by socioeconomic factors. Normal weight ( n  = 40, body mass index Competence Scale (PCS) for healthy eating and exercise, and the General Self-Efficacy Scale (GSES). Composite scores for the three scales were compared between the two groups using the using the two-sample t-test (for normal data) or the Mann-Whitney U test (for non-parametric data). Relationships between the composite scores and patient characteristics were determined using Pearson or Spearman's correlations. The average age of the total cohort was 15.9 ± 1.9 years. 54% were female, and 82% identified as Latino/Hispanic. In comparison to normal weight subjects, overweight/obese adolescents exhibited higher scores for controlled motivation (mean ± standard deviation 28.3 ± 9.3 vs 18.1 ± 8.1) and higher perceived competence [median and 25-75% interquartile range 22.5 (19.0-26.0) vs 20.0 (15.5-25.0)] in relation to eating a healthy diet. These differences persisted after adjustment for age, sex, paternal education, and family income. Overweight/obese adolescents did not lack autonomous motivation but demonstrated higher controlled motivation and perceived competence for healthy eating in comparison to normal weight adolescents, independent of socioeconomic factors. In the clinical practice of weight management, providers should carefully assess adolescents for type of

Comparison study of resistance exercise nomenclature adopted among professionals and undergraduate physical education students

Directory of Open Access Journals (Sweden)

Leonardo Mendes de Souza

2016-05-01

Full Text Available DOI: http://dx.doi.org/10.5007/1980-0037.2016v18n2p233   In the past few years, increased popularity of resistance training (RT and a significant increase in the number of professionals and undergraduate in Physical Education students have been observed. A variety of names has been usually adopted for the same resistance exercise in fields. The aim of the study was to compare the resistance exercise nomenclature adopted by physical education professionals and students, and also to identify the frequencies of names adopted for these resistance exercises. The study included 191 graduate students and active physical education professionals of RT centers and gyms in the state of Rio de Janeiro, Brazil. Ten exercises traditionally performed on RT programs were selected. The results indicated that there was no association between the nomenclature of exercises and academic degree for all exercises included in the survey. However, there was significant difference (p <0.001 among response frequencies for each exercise, for the whole sample. In this sense, this study enabled identifying significant differences in the nomenclature of resistance exercises. Therefore, nomenclature standardization is essential to establish a direction and clearness in communication among professionals.

A comparison of beliefs about exercise during pregnancy between Chinese and Australian pregnant women

OpenAIRE

Guelfi, Kym J.; Wang, Chen; Dimmock, James A.; Jackson, Ben; Newnham, John P.; Yang, Huixia

2015-01-01

Background Despite the well-established benefits of exercise during pregnancy, many women remain inactive. This may be related, in part, to women?s beliefs about exercise in pregnancy, which are likely influenced by cultural background. Accordingly, the aim of this study was to compare attitudes, subjective norms, and perceived behavioural control toward exercise, together with current levels of exercise participation between Chinese and Australian women during pregnancy. A second aim was to ...

Development of new two-dimensional spectral/spatial code based on dynamic cyclic shift code for OCDMA system

Science.gov (United States)

Jellali, Nabiha; Najjar, Monia; Ferchichi, Moez; Rezig, Houria

2017-07-01

In this paper, a new two-dimensional spectral/spatial codes family, named two dimensional dynamic cyclic shift codes (2D-DCS) is introduced. The 2D-DCS codes are derived from the dynamic cyclic shift code for the spectral and spatial coding. The proposed system can fully eliminate the multiple access interference (MAI) by using the MAI cancellation property. The effect of shot noise, phase-induced intensity noise and thermal noise are used to analyze the code performance. In comparison with existing two dimensional (2D) codes, such as 2D perfect difference (2D-PD), 2D Extended Enhanced Double Weight (2D-Extended-EDW) and 2D hybrid (2D-FCC/MDW) codes, the numerical results show that our proposed codes have the best performance. By keeping the same code length and increasing the spatial code, the performance of our 2D-DCS system is enhanced: it provides higher data rates while using lower transmitted power and a smaller spectral width.

Kinetic quantification of plyometric exercise intensity.

Science.gov (United States)

Ebben, William P; Fauth, McKenzie L; Garceau, Luke R; Petushek, Erich J

2011-12-01

Ebben, WP, Fauth, ML, Garceau, LR, and Petushek, EJ. Kinetic quantification of plyometric exercise intensity. J Strength Cond Res 25(12): 3288-3298, 2011-Quantification of plyometric exercise intensity is necessary to understand the characteristics of these exercises and the proper progression of this mode of exercise. The purpose of this study was to assess the kinetic characteristics of a variety of plyometric exercises. This study also sought to assess gender differences in these variables. Twenty-six men and 23 women with previous experience in performing plyometric training served as subjects. The subjects performed a variety of plyometric exercises including line hops, 15.24-cm cone hops, squat jumps, tuck jumps, countermovement jumps (CMJs), loaded CMJs equal to 30% of 1 repetition maximum squat, depth jumps normalized to the subject's jump height (JH), and single leg jumps. All plyometric exercises were assessed with a force platform. Outcome variables associated with the takeoff, airborne, and landing phase of each plyometric exercise were evaluated. These variables included the peak vertical ground reaction force (GRF) during takeoff, the time to takeoff, flight time, JH, peak power, landing rate of force development, and peak vertical GRF during landing. A 2-way mixed analysis of variance with repeated measures for plyometric exercise type demonstrated main effects for exercise type and all outcome variables (p ≤ 0.05) and for the interaction between gender and peak vertical GRF during takeoff (p ≤ 0.05). Bonferroni-adjusted pairwise comparisons identified a number of differences between the plyometric exercises for the outcome variables assessed (p ≤ 0.05). These findings can be used to guide the progression of plyometric training by incorporating exercises of increasing intensity over the course of a program.

Evaluation of oxidative stress in mice subjected to aerobic exercise.

Science.gov (United States)

Lima, Mônica Cruvinel de; Marks, Guido; Silva, Iandara Schettert; Silva, Baldomero Antonio Kato da; Cônsolo, Lourdes Zélia Zanoni; Nogueira, Gabriel Bogalho

2012-08-01

To evaluate the influence of aerobic exercise on oxidative stress in mice. The study included twenty female mice Mus musculus-Swiss divided into two groups: sedentary control (GA) and exercise (GB), each containing ten animals. All animals underwent an adaptation period of seven days isolated in individual boxes. After this period, the animals in the exercise group (GB) were trained in angled running wheel with circumference of 25 cm assembled on an articulated axle during five minutes for three consecutive days. On the fourth day, they underwent an exercise program of one session lasting 45 minutes. The evaluation of oxidative stress was performed by determining the levels of malondialhyde derived of lipid peroxidation by the TBA method. The samples were read in a spectrophotometer at 535 nm. No significant difference was observed in the intergroup comparison of MDA levels in the tissues evaluated. A significant difference was observed in the intragroup comparison of MDA levels in the control group (p = 0.0201).The Tukeys' post hoc test indicated significantly lower values of MDA in the smooth muscle in relation to plasma. In the analysis of variance in the exercise group, a significant difference between tissues (p = 0.0009), with significantly lower values in the smooth muscle in relation to plasma (pstress in mice which were undergone a single session of aerobic exercise.

Physical Activity and Exercise: Perspectives of Adults With Ankylosing Spondylitis.

Science.gov (United States)

O'Dwyer, Tom; McGowan, Emer; O'Shea, Finbar; Wilson, Fiona

2016-05-01

Exercise is a key component of the management of ankylosing spondylitis (AS). Despite numerous benefits, compliance with exercise programs is low. Little attention has been accorded to the experiences of individuals with AS toward physical activity (PA). This study aimed to explore the attitudes toward PA and exercise of adults with AS. A qualitative descriptive design using thematic analysis was used. Seventeen adults with AS participated in individual, semistructured interviews. Interviews were recorded, transcribed, coded and analyzed for themes and subthemes. Four themes emerged from the analysis: (1) benefits, (2) barriers, (3) motivation, and (4) strategies and enablers. Benefits included amelioration of symptoms, improvements in general health, and enhancement of quality of life. Subthemes of barriers to PA included lack of resources, negative attitudes to exercise, misinformation, and condition-related factors. Motivation to exercise was influenced by intrinsic and extrinsic factors. Participants proposed strategies to enhance PA participation and exercise engagement. Awareness of the benefits of PA appears insufficient to motivate individuals with AS to exercise; a number of factors influence individual motivation to exercise. Many perceived barriers to PA may be considered modifiable. Individually-tailored interventions, collaboratively developed by the individual and the healthcare professionals, were proposed as strategies for effective PA and exercise prescription.

Validating the BISON fuel performance code to integral LWR experiments

Energy Technology Data Exchange (ETDEWEB)

Williamson, R.L., E-mail: Richard.Williamson@inl.gov [Fuel Modeling and Simulation, Idaho National Laboratory, P.O. Box 1625, Idaho Falls, ID 83415-3840 (United States); Gamble, K.A., E-mail: Kyle.Gamble@inl.gov [Fuel Modeling and Simulation, Idaho National Laboratory, P.O. Box 1625, Idaho Falls, ID 83415-3840 (United States); Perez, D.M., E-mail: Danielle.Perez@inl.gov [Fuel Modeling and Simulation, Idaho National Laboratory, P.O. Box 1625, Idaho Falls, ID 83415-3840 (United States); Novascone, S.R., E-mail: Stephen.Novascone@inl.gov [Fuel Modeling and Simulation, Idaho National Laboratory, P.O. Box 1625, Idaho Falls, ID 83415-3840 (United States); Pastore, G., E-mail: Giovanni.Pastore@inl.gov [Fuel Modeling and Simulation, Idaho National Laboratory, P.O. Box 1625, Idaho Falls, ID 83415-3840 (United States); Gardner, R.J., E-mail: Russell.Gardner@inl.gov [Fuel Modeling and Simulation, Idaho National Laboratory, P.O. Box 1625, Idaho Falls, ID 83415-3840 (United States); Hales, J.D., E-mail: Jason.Hales@inl.gov [Fuel Modeling and Simulation, Idaho National Laboratory, P.O. Box 1625, Idaho Falls, ID 83415-3840 (United States); Liu, W., E-mail: Wenfeng.Liu@anatech.com [ANATECH Corporation, 5435 Oberlin Dr., San Diego, CA 92121 (United States); Mai, A., E-mail: Anh.Mai@anatech.com [ANATECH Corporation, 5435 Oberlin Dr., San Diego, CA 92121 (United States)

2016-05-15

Highlights: • The BISON multidimensional fuel performance code is being validated to integral LWR experiments. • Code and solution verification are necessary prerequisites to validation. • Fuel centerline temperature comparisons through all phases of fuel life are very reasonable. • Accuracy in predicting fission gas release is consistent with state-of-the-art modeling and the involved uncertainties. • Rod diameter comparisons are not satisfactory and further investigation is underway. - Abstract: BISON is a modern finite element-based nuclear fuel performance code that has been under development at Idaho National Laboratory (INL) since 2009. The code is applicable to both steady and transient fuel behavior and has been used to analyze a variety of fuel forms in 1D spherical, 2D axisymmetric, or 3D geometries. Code validation is underway and is the subject of this study. A brief overview of BISON's computational framework, governing equations, and general material and behavioral models is provided. BISON code and solution verification procedures are described, followed by a summary of the experimental data used to date for validation of Light Water Reactor (LWR) fuel. Validation comparisons focus on fuel centerline temperature, fission gas release, and rod diameter both before and following fuel-clad mechanical contact. Comparisons for 35 LWR rods are consolidated to provide an overall view of how the code is predicting physical behavior, with a few select validation cases discussed in greater detail. Results demonstrate that (1) fuel centerline temperature comparisons through all phases of fuel life are very reasonable with deviations between predictions and experimental data within ±10% for early life through high burnup fuel and only slightly out of these bounds for power ramp experiments, (2) accuracy in predicting fission gas release appears to be consistent with state-of-the-art modeling and with the involved uncertainties and (3) comparison

Comparison between Nintendo Wii Fit aerobics and traditional aerobic exercise in sedentary young adults.

Science.gov (United States)

Douris, Peter C; McDonald, Brittany; Vespi, Frank; Kelley, Nancy C; Herman, Lawrence

2012-04-01

Exergaming is becoming a popular recreational activity for young adults. The purpose was to compare the physiologic and psychological responses of college students playing Nintendo Wii Fit, an active video game console, vs. an equal duration of moderate-intensity brisk walking. Twenty-one healthy sedentary college-age students (mean age 23.2 ± 1.8 years) participated in a randomized, double cross-over study, which compared physiologic and psychological responses to 30 minutes of brisk walking exercise on a treadmill vs. 30 minutes playing Nintendo Wii Fit "Free Run" program. Physiologic parameters measured included heart rate, rate pressure product, respiratory rate, and rating of perceived exertion. Participants' positive well-being, psychological distress, and level of fatigue associated with each exercise modality were quantified using the Subjective Exercise Experience Scale. The mean maximum heart rate (HRmax) achieved when exercising with Wii Fit (142.4 ± 20.5 b·min(-1)) was significantly greater (p = 0.001) compared with exercising on the treadmill (123.2 ± 13.7 b·min(-1)). Rate pressure product was also significantly greater (p = 0.001) during exercise on the Wii Fit. Participants' rating of perceived exertion when playing Wii Fit (12.7 ± 3.0) was significantly greater (p = 0.014) when compared with brisk walking on the treadmill (10.1 ± 3.3). However, psychologically when playing Wii Fit, participants' positive well-being decreased significantly (p = 0.018) from preexercise to postexercise when compared with exercising on the treadmill. College students have the potential to surpass exercise intensities achieved when performing a conventional standard for moderate-intensity exercise when playing Nintendo Wii Fit "Free Run" with a self-selected intensity. We concluded that Nintendo Wii Fit "Free Run" may act as an alternative to traditional moderate-intensity aerobic exercise in fulfilling the American College of Sports Medicine requirements for

Nordic nuclear emergency exercises. Final report

International Nuclear Information System (INIS)

Bennerstedt, T.; Stranden, E.; Salo, A.

1995-01-01

In all Nordic countries, nuclear emergency provisions have been revised following the Chernobyl accident. Local and national exercises are carried out regularly in each country. Several actions have been taken to harmonize the emergency approaches of the Nordic countries. In order to further promote consistent decisions in an emergency situation, two Nordic exercises were conducted in 1993. It was important to see if all five countries (Denmark, Finland, Iceland, Norway and Sweden) responded in a similar way to a given situation, as far as risk assessment and protective measures were concerned. The exercises were mainly aimed at decision makers and advisers of the five national emergency organizations. Thus, the exercises did not include comparison of underlying calculations on, e.g., atmospheric trajectories or transfer of radioactive material from air to ground. Such functions were tested separately in drills that also formed part of the Nordic emergency preparedness program. The exercises included an acute-phase situation (NORA), and a late-phase situation (ODIN). The Nordic exercises aroused international interest, and hence observers from IAEA, OECD/NEA and the European Union were invited to the exercises. NORA was observed by representatives from IAEA (in Finland) and OECD/NEA (in Sweden). ODIN was attended by IAEA (in Sweden) and the European Union (in Norway). Generally speaking, regional exercises such as NORA and ODIN help improve national emergency preparedness planning, organization and operations as well as international coordination. (EG)

Altered gas-exchange at peak exercise in obese adolescents: implications for verification of effort during cardiopulmonary exercise testing.

Science.gov (United States)

Marinus, Nastasia; Bervoets, Liene; Massa, Guy; Verboven, Kenneth; Stevens, An; Takken, Tim; Hansen, Dominique

2017-12-01

Cardiopulmonary exercise testing is advised ahead of exercise intervention in obese adolescents to assess medical safety of exercise and physical fitness. Optimal validity and reliability of test results are required to identify maximal exercise effort. As fat oxidation during exercise is disturbed in obese individuals, it remains an unresolved methodological issue whether the respiratory gas exchange ratio (RER) is a valid marker for maximal effort during exercise testing in this population. RER during maximal exercise testing (RERpeak), and RER trajectories, was compared between obese and lean adolescents and relationships between RERpeak, RER slope and subject characteristics (age, gender, Body Mass Index [BMI], Tanner stage, physical activity level) were explored. Thirty-four obese (BMI: 35.1±5.1 kg/m²) and 18 lean (BMI: 18.8±1.9 kg/m²) adolescents (aged 12-18 years) performed a maximal cardiopulmonary exercise test on bike, with comparison of oxygen uptake (VO2), heart rate (HR), expiratory volume (VE), carbon dioxide output (VCO2), and cycling power output (W). RERpeak (1.09±0.06 vs. 1.14±0.06 in obese vs. lean adolescents, respectively) and RER slope (0.03±0.01 vs. 0.05±0.01 per 10% increase in VO2, in obese vs. lean adolescents, respectively) was significantly lower in obese adolescents, and independently related to BMI (Pexercise testing in this population.

Comparison of angiography, prone renography, and exercise renography for treatment planning in hypertension

International Nuclear Information System (INIS)

Clorius, J.H.; Strauss, L.G.; Allenberg, J.; Hupp, T.; Schmidlin, P.; Irngartinger, G.

1987-01-01

Fifteen hypertensives with unilateral vascular stenosis had selective renal angiograms, prone-position gamma camera hippurate renograms, and upright exercise renograms. The exercise renograms were used to identify renal vasomotor dysfunction. Each procedure was assessed for its value to predict cure of hypertension. Therapy included one nephrectomy, and angioplasty, and 13 surgical revascularizations. Neither the extent of vascular lumen reduction as assessed with angiography nor the unilateral function impairment documented with a prone-position renogram contained useful prognostic data. Exercise renography correctly predicted the posttherapy blood pressure status in 14 of 15 hypertensives. Exercise renography can identify a newly recognized function response of the vasculature of the kidney, a pathologic response that shows promise in the investigation of hypertension

An experimental comparison of coded modulation strategies for 100 Gb/s transceivers

NARCIS (Netherlands)

Sillekens, E.; Alvarado, A.; Okonkwo, C.; Thomsen, B.C.

2016-01-01

Coded modulation is a key technique to increase the spectral efficiency of coherent optical communication systems. Two popular strategies for coded modulation are turbo trellis-coded modulation (TTCM) and bit-interleaved coded modulation (BICM) based on low-density parity-check (LDPC) codes.

MCNP and GADRAS Comparisons

International Nuclear Information System (INIS)

Klasky, Marc Louis; Myers, Steven Charles; James, Michael R.; Mayo, Douglas R.

2016-01-01

To facilitate the timely execution of System Threat Reviews (STRs) for DNDO, and also to develop a methodology for performing STRs, LANL performed comparisons of several radiation transport codes (MCNP, GADRAS, and Gamma-Designer) that have been previously utilized to compute radiation signatures. While each of these codes has strengths, it is of paramount interest to determine the limitations of each of the respective codes and also to identify the most time efficient means by which to produce computational results, given the large number of parametric cases that are anticipated in performing STR's. These comparisons serve to identify regions of applicability for each code and provide estimates of uncertainty that may be anticipated. Furthermore, while performing these comparisons, examination of the sensitivity of the results to modeling assumptions was also examined. These investigations serve to enable the creation of the LANL methodology for performing STRs. Given the wide variety of radiation test sources, scenarios, and detectors, LANL calculated comparisons of the following parameters: decay data, multiplicity, device (n,γ) leakages, and radiation transport through representative scenes and shielding. This investigation was performed to understand potential limitations utilizing specific codes for different aspects of the STR challenges.

User's manual for the G.T.M.-1 computer code

International Nuclear Information System (INIS)

Prado-Herrero, P.

1992-01-01

This document describes the GTM-1 ( Geosphere Transport Model, release-1) computer code and is intended to provide the reader with enough detailed information in order to use the code. GTM-1 was developed for the assessment of radionuclide migration by the ground water through geologic deposits whose properties can change along the pathway.GTM-1 solves the transport equation by the finite differences method ( Crank-Nicolson scheme ). It was developped for specific use within Probabilistic System Assessment (PSA) Monte Carlo Method codes; in this context the first application of GTM-1 was within the LISA (Long Term Isolation System Assessment) code. GTM-1 is also available as an independent model, which includes various submodels simulating a multi-barrier disposal system. The code has been tested with the PSACOIN ( Probabilistic System Assessment Codes intercomparison) benchmarks exercises from PSAC User Group (OECD/NEA). 10 refs., 6 Annex., 2 tabs

Stress analysis of HLW containers. Preliminary ring test exercise Compas project

International Nuclear Information System (INIS)

1989-01-01

This document describes the series of experiments and associated calculations performed as the Compas preliminary ring test exercise. A number of mild steel rings, representative of sections through HLW containers, some notched and pre-cracked, were tested in compression right up to and beyond their ultimate load. The Compas project partners independently modelled the behaviour of these rings using their finite element codes. Four different ring types were tested, and each test was repeated three times. For three of the ring types, the three test repetitions gave identical results. The fourth ring, which was not modelled by the partners, had a 4 mm thick layer of weld metal deposited on its surface. The three tests on this ring did not give identical results and suggested that the effect of welding methods should be addressed at a later stage of the project. Fracture was not found to be a significant cause of ring failure. The results of the ring tests were compared with the partners predictions, and additionally some time was spent assessing where the use of the codes could be improved. This exercise showed that the partners codes have the ability to produce results within acceptable limits. Most codes were unable to model stable crack growth. There were indications that some codes would not be able to cope with a significantly more complex three-dimensional analysis

Comparisons with measured data of the simulated local core parameters by the coupled code ATHLET-BIPR-VVER applying a new enhanced model of the reactor pressure vessel

International Nuclear Information System (INIS)

Nikonov, S.; Pasichnyk, I.; Velkov, K.; Pautz, A.

2011-01-01

The paper describes the performed comparisons of measured and simulated local core data based on the OECD/NEA Benchmark on Kalinin-3 NPP: 'Switching off of one of the four operating main circulation pumps at nominal reactor power'. The local measurements of in core self-powered neutron detectors (SPND) in 64 fuel assemblies on 7 axial levels are used for the comparisons of the assemblies axial power distributions and the thermocouples readings at 93 fuel assembly heads are applied for the fuel assembly coolant temperature comparisons. The analyses are done on the base of benchmark transient calculations performed with the coupled system code ATHLET/BIPR-VVER. In order to describe more realistically the fluid mixing phenomena in a reactor pressure vessel a new enhanced nodalization scheme is being developed. It could take into account asymmetric flow behaviour in the reactor pressure vessel structures like downcomer, reactor core inlet and outlet, control rods' guided tubes, support grids etc. For this purpose details of the core geometry are modelled. About 58000 control volumes and junctions are applied. Cross connection are used to describe the interaction between the fluid objects. The performed comparisons are of great interest because they show some advantages by performing coupled code production pseudo-3D analysis of NPPs applying the parallel thermo-hydraulic channel methodology (or 1D thermo-hydraulic system code modeling). (Authors)

Self-determined to exercise? Leisure-time exercise behavior, exercise motivation, and exercise dependence in youth.

Science.gov (United States)

Symons Downs, Danielle; Savage, Jennifer S; DiNallo, Jennifer M

2013-02-01

Scant research has examined the determinants of primary exercise dependence symptoms in youth. Study purposes were to examine sex differences across leisure-time exercise behavior, motivation, and primary exercise dependence symptoms in youth and the extent to which exercise behavior and motivation predicted exercise dependence within the Self-Determination Theory framework. Adolescents (N = 805; mean age = 15 years; 46% girls) completed measures of exercise behavior, motivation, and exercise dependence in health/PE classes. One-way ANOVA revealed boys scored higher than girls on leisure-time exercise behavior, exercise dependence symptoms, and most of the exercise motivation subscales. Hierarchical regression analyses indicated a) sex, exercise behavior, motivation, and their interaction terms explained 39% of the variance in primary exercise dependence; b) Integrated Regulation and Introjected Regulation were important determinants of exercise dependence; and c) sex moderated the contributions of External Regulation for predicting exercise dependence such that boys in the high and low external regulation groups had higher symptoms than girls in the high and low external regulation groups. These preliminary findings support the controlled dimensions of Integrated Regulation (boys, girls), Introjected Regulation (boys, girls), and External Regulation (boys only) are important determinants of primary exercise dependence symptoms.

Code Package to Analyze Parameters of the WWER Fuel Rod. TOPRA-2 Code - Verification Data

International Nuclear Information System (INIS)

Scheglov, A.; Proselkov, V.; Passage, G.; Stefanova, S.

2009-01-01

Presented are the data for computer codes to analyze WWER fuel rods, used in the WWER department of RRC 'Kurchatov Institute'. Presented is the description of TOPRA-2 code intended for the engineering analysis of thermophysical and strength parameters of the WWER fuel rod - temperature distributions along the fuel radius, gas pressures under the cladding, stresses in the cladding, etc. for the reactor operation in normal conditions. Presented are some results of the code verification against test problems and the data obtained in the experimental programs. Presented are comparison results of the calculations with TOPRA-2 and TRANSURANUS (V1M1J06) codes. Results obtained in the course of verification demonstrate possibility of application of the methodology and TOPRA-2 code for the engineering analysis of the WWER fuel rods

Measuring skin temperature before, during and after exercise: a comparison of thermocouples and infrared thermography

International Nuclear Information System (INIS)

Fernandes, Alex de Andrade; Amorim, Paulo Roberto dos Santos; De Moura, Anselmo Gomes; Moreira, Danilo Gomes; Costa, Carlos Magno Amaral; Marins, João Carlos Bouzas; Brito, Ciro José; Sillero-Quintana, Manuel

2014-01-01

Measuring skin temperature (T SK ) provides important information about the complex thermal control system and could be interesting when carrying out studies about thermoregulation. The most common method to record T SK  involves thermocouples at specific locations; however, the use of infrared thermal imaging (IRT) has increased. The two methods use different physical processes to measure T SK , and each has advantages and disadvantages. Therefore, the objective of this study was to compare the mean skin temperature (MT SK ) measurements using thermocouples and IRT in three different situations: pre-exercise, exercise and post-exercise. Analysis of the residual scores in Bland–Altman plots showed poor agreement between the MT SK  obtained using thermocouples and those using IRT. The averaged error was −0.75 °C during pre-exercise, 1.22 °C during exercise and −1.16 °C during post-exercise, and the reliability between the methods was low in the pre- (ICC = 0.75 [0.12 to 0.93]), during (ICC = 0.49 [−0.80 to 0.85]) and post-exercise (ICC = 0.35 [−1.22 to 0.81] conditions. Thus, there is poor correlation between the values of MT SK  measured by thermocouples and IRT pre-exercise, exercise and post-exercise, and low reliability between the two forms of measurement. (paper)

Linear and nonlinear verification of gyrokinetic microstability codes

Science.gov (United States)

Bravenec, R. V.; Candy, J.; Barnes, M.; Holland, C.

2011-12-01

Verification of nonlinear microstability codes is a necessary step before comparisons or predictions of turbulent transport in toroidal devices can be justified. By verification we mean demonstrating that a code correctly solves the mathematical model upon which it is based. Some degree of verification can be accomplished indirectly from analytical instability threshold conditions, nonlinear saturation estimates, etc., for relatively simple plasmas. However, verification for experimentally relevant plasma conditions and physics is beyond the realm of analytical treatment and must rely on code-to-code comparisons, i.e., benchmarking. The premise is that the codes are verified for a given problem or set of parameters if they all agree within a specified tolerance. True verification requires comparisons for a number of plasma conditions, e.g., different devices, discharges, times, and radii. Running the codes and keeping track of linear and nonlinear inputs and results for all conditions could be prohibitive unless there was some degree of automation. We have written software to do just this and have formulated a metric for assessing agreement of nonlinear simulations. We present comparisons, both linear and nonlinear, between the gyrokinetic codes GYRO [J. Candy and R. E. Waltz, J. Comput. Phys. 186, 545 (2003)] and GS2 [W. Dorland, F. Jenko, M. Kotschenreuther, and B. N. Rogers, Phys. Rev. Lett. 85, 5579 (2000)]. We do so at the mid-radius for the same discharge as in earlier work [C. Holland, A. E. White, G. R. McKee, M. W. Shafer, J. Candy, R. E. Waltz, L. Schmitz, and G. R. Tynan, Phys. Plasmas 16, 052301 (2009)]. The comparisons include electromagnetic fluctuations, passing and trapped electrons, plasma shaping, one kinetic impurity, and finite Debye-length effects. Results neglecting and including electron collisions (Lorentz model) are presented. We find that the linear frequencies with or without collisions agree well between codes, as do the time averages of

Electromyographic Comparison of Barbell Deadlift, Hex Bar Deadlift, and Hip Thrust Exercises: A Cross-Over Study.

Science.gov (United States)

Andersen, Vidar; Fimland, Marius S; Mo, Dag-Andrè; Iversen, Vegard M; Vederhus, Torbjørn; Rockland Hellebø, Lars R; Nordaune, Kristina I; Saeterbakken, Atle H

2018-03-01

Andersen, V, Fimland, MS, Mo, D-A, Iversen, VM, Vederhus, T, Rockland Hellebø, LR, Nordaune, KI, and Saeterbakken, AH. Electromyographic comparison of barbell deadlift, hex bar deadlift, and hip thrust exercises: a cross-over study. J Strength Cond Res 32(3): 587-593, 2018-The aim of the study was to compare the muscle activation level of the gluteus maximus, biceps femoris, and erector spinae in the hip thrust, barbell deadlift, and hex bar deadlift; each of which are compound resisted hip extension exercises. After 2 familiarization sessions, 13 resistance-trained men performed a 1 repetition maximum in all 3 exercises in 1 session, in randomized and counterbalanced order. The whole ascending movement (concentric phase), as well as its lower and upper parts (whole movement divided in 2), were analyzed. The hip thrust induced greater activation of the gluteus maximus compared with the hex bar deadlift in the whole (16%, p = 0.025) and the upper part (26%, p = 0.015) of the movement. For the whole movement, the biceps femoris was more activated during barbell deadlift compared with both the hex bar deadlift (28%, p bar deadlift (p = 0.049) compared with hip thrust. Biceps femoris activation in the upper part of the movement was 39% higher for the barbell deadlift compared with the hex bar deadlift (p = 0.001) and 34% higher for the hip thrust compared with the hex bar deadlift (p = 0.002). No differences were displayed for the erector spinae activation (p = 0.312-0.859). In conclusion, the barbell deadlift was clearly superior in activating the biceps femoris compared with the hex bar deadlift and hip thrust, whereas the hip thrust provided the highest gluteus maximus activation.

Development of 2-d cfd code

International Nuclear Information System (INIS)

Mirza, S.A.

1999-01-01

In the present study, a two-dimensional computer code has been developed in FORTRAN using CFD technique, which is basically a numerical scheme. This computer code solves the Navier Stokes equations and continuity equation to find out the velocity and pressure fields within a given domain. This analysis has been done for the developed within a square cavity driven by the upper wall which has become a bench mark for testing and comparing the newly developed numerical schemes. Before to handle this task, different one-dimensional cases have been studied by CFD technique and their FORTRAN programs written. The cases studied are Couette flow, Poiseuille flow with and without using symmetric boundary condition. Finally a comparison between CFD results and analytical results has also been made. For the cavity flow the results from the developed code have been obtained for different Reynolds numbers which are finally presented in the form of velocity vectors. The comparison of the developed code results have been made with the results obtained from the share ware version of a commercially available code for Reynolds number of 10.0. The disagreement in the results quantitatively and qualitatively at some grid points of the calculation domain have been discussed and future recommendations in this regard have also been made. (author)

Comparison of the two thermal-hydraulic codes Thyc and Vipre-02 on Vatican experiment

International Nuclear Information System (INIS)

Montat, D.; Maurel, F.; Olive, J.; Srikantiah, G.

1993-08-01

EDF's THYC and EPRI's VIPRE-02 3D thermalhydraulics computer codes are based on strongly different approaches (mixing against two-fluid representation for the two-phase flow, and porous media against subchannel approach for the rod bundle geometry description). In order to assess their efficiencies, they were both used to compute the two-phase flow behavior in an EDF experimental set-up, VATICAN. This set-up consisted of a 2.10 m high vertically oriented rod bundle of 40 heated rods in a 10 by 4 matrix (9.5 mm diameter and 12.6 mm square pitch). Refrigerant - 114 was introduced through the bottom left and right sides of the bundle and exited at the top. The lower 1.6 m height of the bundle was separated into two symmetric halves by a vertical wall. Desequilibrium in flow and quality between the two halves could be set, so that strong lateral mixing occurred above the divider wall. Comparison of codes computing and experimental data showed to some extent the superiority of a 6-equations model, but also highlighted the dramatic need for good constitutive relations concerning for instance the turbulent mixing. Some systematic deviations from experimental data were detected, linked to poor accuracy of some chosen closure laws. (authors). 6 figs., 3 tabs., 5 refs

Comparison of affective responses during and after low volume high-intensity interval exercise, continuous moderate- and continuous high-intensity exercise in active, untrained, healthy males.

Science.gov (United States)

Niven, Ailsa; Thow, Jacqueline; Holroyd, Jack; Turner, Anthony P; Phillips, Shaun M

2018-09-01

This study compared affective responses to low volume high-intensity interval exercise (HIIE), moderate-intensity continuous exercise (MICE) and high-intensity continuous exercise (HICE). Twelve untrained males ([Formula: see text] 48.2 ± 6.7 ml·kg -1 ·min -1 ) completed MICE (30 min cycle at 85% of ventilatory threshold (VT)), HICE (cycle at 105% of VT matched with MICE for total work), and HIIE (10 x 6 s cycle sprints with 60 s recovery). Affective valence and perceived activation were measured before exercise, post warm-up, every 20% of exercise time, and 1, 5, 10, and 15 min post-exercise. Affective valence during exercise declined by 1.75 ± 2.42, 1.17 ± 1.99, and 0.42 ± 1.38 units in HICE, HIIE, and MICE, respectively, but was not statistically influenced by trial (P = 0.35), time (P = 0.06), or interaction effect (P = 0.08). Affective valence during HICE and HIIE was consistently less positive than MICE. Affective valence post-exercise was not statistically influenced by trial (P = 0.10) and at 5 min post-exercise exceeded end-exercise values (P = 0.048). Circumplex profiles showed no negative affect in any trial. Affective responses to low volume HIIE are similar to HICE but remain positive and rebound rapidly, suggesting it may be a potential alternative exercise prescription.

Effects of Schroth and Pilates exercises on the Cobb angle and weight distribution of patients with scoliosis.

Science.gov (United States)

Kim, Gichul; HwangBo, Pil-Neo

2016-03-01

[Purpose] The purpose of this study was to compare the effect of Schroth and Pilates exercises on the Cobb angle and body weight distribution of patients with idiopathic scoliosis. [Subjects] Twenty-four scoliosis patients with a Cobb angle of ≥20° were divided into the Schroth exercise group (SEG, n = 12) and the Pilates exercise group (PEG, n = 12). [Methods] The SEG and PEG performed Schroth and Pilates exercises, respectively, three times a week for 12 weeks. The Cobb angle was measured in the standing position with a radiography apparatus, and weight load was measured with Gait View Pro 1.0. [Results] In the intragroup comparison, both groups showed significant changes in the Cobb angle. For weight distribution, the SEG showed significant differences in the total weight between the concave and convex sides, but the PEG did not show significant differences. Furthermore, in the intragroup comparison, the SEG showed significant differences in the changes in the Cobb angle and weight distribution compared with the PEG. [Conclusion] Both Schroth and Pilates exercises were effective in changing the Cobb angle and weight distribution of scoliosis patients; however, the intergroup comparison showed that the Schroth exercise was more effective than the Pilates exercise.

Comparison of strongly heat-driven flow codes for unsaturated media

International Nuclear Information System (INIS)

Updegraff, C.D.

1989-08-01

Under the sponsorship of the US Nuclear Regulatory Commission, Sandia National Laboratories (SNL) is developing a performance assessment methodology for the analysis of long-term disposal of high-level radioactive waste (HLW) in unsaturated welded tuff. As part of this effort, SNL evaluated existing strongly heat-driven flow computer codes for simulating ground-water flow in unsaturated media. The three codes tested, NORIA, PETROS, and TOUGH, were compared against a suite of problems for which analytical and numerical solutions or experimental results exist. The problems were selected to test the abilities of the codes to simulate situations ranging from simple, uncoupled processes, such as two-phase flow or heat transfer, to fully coupled processes, such as vaporization caused by high temperatures. In general, all three codes were found to be difficult to use because of (1) built-in time stepping criteria, (2) the treatment of boundary conditions, and (3) handling of evaporation/condensation problems. A drawback of the study was that adequate problems related to expected repository conditions were not available in the literature. Nevertheless, the results of this study suggest the need for thorough investigations of the impact of heat on the flow field in the vicinity of an unsaturated HLW repository. Recommendations are to develop a new flow code combining the best features of these three codes and eliminating the worst ones. 19 refs., 49 figs

Hypotensive response magnitude and duration in hypertensives: continuous and interval exercise.

Science.gov (United States)

Carvalho, Raphael Santos Teodoro de; Pires, Cássio Mascarenhas Robert; Junqueira, Gustavo Cardoso; Freitas, Dayana; Marchi-Alves, Leila Maria

2015-03-01

Although exercise training is known to promote post-exercise hypotension, there is currently no consistent argument about the effects of manipulating its various components (intensity, duration, rest periods, types of exercise, training methods) on the magnitude and duration of hypotensive response. To compare the effect of continuous and interval exercises on hypotensive response magnitude and duration in hypertensive patients by using ambulatory blood pressure monitoring (ABPM). The sample consisted of 20 elderly hypertensives. Each participant underwent three ABPM sessions: one control ABPM, without exercise; one ABPM after continuous exercise; and one ABPM after interval exercise. Systolic blood pressure (SBP), diastolic blood pressure (DBP), mean arterial pressure (MAP), heart rate (HR) and double product (DP) were monitored to check post-exercise hypotension and for comparison between each ABPM. ABPM after continuous exercise and after interval exercise showed post-exercise hypotension and a significant reduction (p ABPM. Comparing ABPM after continuous and ABPM after interval exercise, a significant reduction (p < 0.05) in SBP, DBP, MAP and DP was observed in the latter. Continuous and interval exercise trainings promote post-exercise hypotension with reduction in SBP, DBP, MAP and DP in the 20 hours following exercise. Interval exercise training causes greater post-exercise hypotension and lower cardiovascular overload as compared with continuous exercise.

Neutronic evolution of SENA reactor during the first and second cycles. Comparison between the experimental power distributions obtained from the in-core instrumentation evaluation code CIRCE and the theoretical power values computed with the two-dimensional diffusion-evolution code EVOE

International Nuclear Information System (INIS)

Andrieux, Chantal

1976-03-01

The neutronic evolution of the reacteur Sena during the first and second cycles is presented. The experimental power distributions, obtained from the in-core instrumentation evaluation code CIRCE are compared with the theoretical powers calculated with the two-dimensional diffusion-evolution code EVOE. The CIRCE code allows: the study of the evolution of the principal parameters of the core, the comparison of the results of measured and theoretical estimates. Therefore this study has a great interest for the knowledge of the neutronic evolution of the core, as well as the validation of the refinement of theoretical estimation methods. The core calculation methods and requisite data for the evaluation of the measurements are presented after a brief description of the SENA core and its inner instrumentation. The principle of the in-core instrumentation evaluation code CIRCE, and calculation of the experimental power distributions and nuclear core parameters are then exposed. The results of the evaluation are discussed, with a comparison of the theoretical and experimental results. Taking account of the approximations used, these results, as far as the first and second cycles at SENA are concerned, are satisfactory, the deviations between theoretical and experimental power distributions being lower than 3% at the middle of the reactor and 9% at the periphery [fr

SUMMARY OF GENERAL WORKING GROUP A+B+D: CODES BENCHMARKING.

Energy Technology Data Exchange (ETDEWEB)

WEI, J.; SHAPOSHNIKOVA, E.; ZIMMERMANN, F.; HOFMANN, I.

2006-05-29

Computer simulation is an indispensable tool in assisting the design, construction, and operation of accelerators. In particular, computer simulation complements analytical theories and experimental observations in understanding beam dynamics in accelerators. The ultimate function of computer simulation is to study mechanisms that limit the performance of frontier accelerators. There are four goals for the benchmarking of computer simulation codes, namely debugging, validation, comparison and verification: (1) Debugging--codes should calculate what they are supposed to calculate; (2) Validation--results generated by the codes should agree with established analytical results for specific cases; (3) Comparison--results from two sets of codes should agree with each other if the models used are the same; and (4) Verification--results from the codes should agree with experimental measurements. This is the summary of the joint session among working groups A, B, and D of the HI32006 Workshop on computer codes benchmarking.

Comparison of control fasting plasma glucose of exercise-only versus exercise-diet among a pre-diabetic population: a meta-analysis.

Science.gov (United States)

Zheng, L; Wu, J; Wang, G; Persuitte, G; Ma, Y; Zou, L; Zhang, L; Zhao, M; Wang, J; Lan, Qin; Liu, Z; Fan, H; Li, J

2016-04-01

Exercise is considered a protective factor in the prevention of type 2 diabetes, although its role as a sole treatment for pre-diabetes remains unknown. The present meta-analysis compared the effect of exercise-only with exercise-diet interventions on plasma glucose levels among a pre-diabetic population. A literature search was conducted using PubMed, EMBASE and Cochrane databases. The Cochrane Collaboration tool was used to assess the quality of each trial. Two reviewers independently performed quality assessment of all included articles. A random effects model was used to calculate the pooled effect. A total of 4021 participants from 12 studies were included in this meta-analysis, 2045 of them were in the intervention group and 1976 were in the control group. Compared with the exercise-only interventions, the exercise-diet interventions showed a significant effect on decreasing fasting plasma glucose (FPG) levels, with a weighted mean difference (WMD) =-0.22 mmol/l, 95% confidence interval (CI): -0.25, -0.18 (Z=12.06, Pexercise-only interventions did not produce a statistically significant result (WMD=-0.09 mmol/l, 95% CI: -0.18, 0.00, Z=1.91, P>0.05). According to the intervention periods, the pooled effect in the ⩾2-year group was the highest, and its WMD (95% CI) was -0.24 mmol/l (-0.43,-0.05). The pooled effects were statistically significant among the elderly and those of American and European descent, with WMD (95% CI) being -0.19 mmol/l (95% CI: -0.22, -0.15), -0.17 mmol/l (-0.21,-0.12) and -0.22 mmol/l (-0.27, -0.17), respectively. Evidence from published trials indicates that exercise-diet interventions showed a significant effect on decreasing FPG levels.

A comparison of thermal algorithms of fuel rod performance code systems

International Nuclear Information System (INIS)

Park, C. J.; Park, J. H.; Kang, K. H.; Ryu, H. J.; Moon, J. S.; Jeong, I. H.; Lee, C. Y.; Song, K. C.

2003-11-01

The goal of the fuel rod performance is to identify the robustness of a fuel rod with cladding material. Computer simulation of the fuel rod performance becomes one of important parts to designed and evaluate new nuclear fuels and claddings. To construct a computing code system for the fuel rod performance, several algorithms of the existing fuel rod performance code systems are compared and are summarized as a preliminary work. Among several code systems, FRAPCON, and FEMAXI for LWR, ELESTRES for CANDU reactor, and LIFE for fast reactor are reviewed. Thermal algorithms of the above codes are investigated including methodologies and subroutines. This work will be utilized to construct a computing code system for dry process fuel rod performance

A comparison of thermal algorithms of fuel rod performance code systems

Energy Technology Data Exchange (ETDEWEB)

Park, C. J.; Park, J. H.; Kang, K. H.; Ryu, H. J.; Moon, J. S.; Jeong, I. H.; Lee, C. Y.; Song, K. C

2003-11-01

The goal of the fuel rod performance is to identify the robustness of a fuel rod with cladding material. Computer simulation of the fuel rod performance becomes one of important parts to designed and evaluate new nuclear fuels and claddings. To construct a computing code system for the fuel rod performance, several algorithms of the existing fuel rod performance code systems are compared and are summarized as a preliminary work. Among several code systems, FRAPCON, and FEMAXI for LWR, ELESTRES for CANDU reactor, and LIFE for fast reactor are reviewed. Thermal algorithms of the above codes are investigated including methodologies and subroutines. This work will be utilized to construct a computing code system for dry process fuel rod performance.

Comparison of different methods for eliciting exercise-to-music for clients with Alzheimer's disease.

Science.gov (United States)

Cevasco, Andrea M; Grant, Roy E

2003-01-01

Many of the noted problems associated with Alzheimer's disease (AD) sometimes can be delayed, retarded, or even reversed with proper exercise and interaction with the environment. An overwhelming body of research efforts has revealed that music activity brings about the greatest degree of responsiveness, including exercise, in clients with AD; yet, specific techniques which elicit the greatest amount of physical responses during the music activities remain unidentified. The purpose of this study was two-fold: comparing two methods of intervention and comparing responses to vocal versus instrumental music during exercise and exercise with instruments. In Experiment 1 the authors compared 2 treatment conditions to facilitate exercise during music activities: (a) verbalizing the movement for each task once, one beat before commencing, followed by visual cueing for the remainder of the task; (b) verbal and visual cueing for each revolution or change in rhythm for the duration of the task. Data collection over 38 sessions consisted of recording the participation of each client at 30-second intervals for the duration of each treatment condition, indicating at each interval whether the client was participating in the designated movement (difficult), participating in exercise approximating the designated movement (easy), or not participating. Results indicated that the continuous verbal cueing/easy treatment elicited significantly greater participation than one verbal cue/difficult treatment, p music, vocal versus instrumental, during types of activities, exercise with and without instruments, were examined. Data were collected over 26 sessions, 52 activities, in the same 2 assisted living facilities as those in Experiment 1, but one year later Results indicated that both the type of activity and the type of music had some effect on participation. Also, data indicated participation in exercise to instrumental music was significantly greater than exercise with instruments

On the automated assessment of nuclear reactor systems code accuracy

International Nuclear Information System (INIS)

Kunz, Robert F.; Kasmala, Gerald F.; Mahaffy, John H.; Murray, Christopher J.

2002-01-01

An automated code assessment program (ACAP) has been developed to provide quantitative comparisons between nuclear reactor systems (NRS) code results and experimental measurements. The tool provides a suite of metrics for quality of fit to specific data sets, and the means to produce one or more figures of merit (FOM) for a code, based on weighted averages of results from the batch execution of a large number of code-experiment and code-code data comparisons. Accordingly, this tool has the potential to significantly streamline the verification and validation (V and V) processes in NRS code development environments which are characterized by rapidly evolving software, many contributing developers and a large and growing body of validation data. In this paper, a survey of data conditioning and analysis techniques is summarized which focuses on their relevance to NRS code accuracy assessment. A number of methods are considered for their applicability to the automated assessment of the accuracy of NRS code simulations. A variety of data types and computational modeling methods are considered from a spectrum of mathematical and engineering disciplines. The goal of the survey was to identify needs, issues and techniques to be considered in the development of an automated code assessment procedure, to be used in United States Nuclear Regulatory Commission (NRC) advanced thermal-hydraulic T/H code consolidation efforts. The ACAP software was designed based in large measure on the findings of this survey. An overview of this tool is summarized and several NRS data applications are provided. The paper is organized as follows: The motivation for this work is first provided by background discussion that summarizes the relevance of this subject matter to the nuclear reactor industry. Next, the spectrum of NRS data types are classified into categories, in order to provide a basis for assessing individual comparison methods. Then, a summary of the survey is provided, where each

Input data required for specific performance assessment codes

International Nuclear Information System (INIS)

Seitz, R.R.; Garcia, R.S.; Starmer, R.J.; Dicke, C.A.; Leonard, P.R.; Maheras, S.J.; Rood, A.S.; Smith, R.W.

1992-02-01

The Department of Energy's National Low-Level Waste Management Program at the Idaho National Engineering Laboratory generated this report on input data requirements for computer codes to assist States and compacts in their performance assessments. This report gives generators, developers, operators, and users some guidelines on what input data is required to satisfy 22 common performance assessment codes. Each of the codes is summarized and a matrix table is provided to allow comparison of the various input required by the codes. This report does not determine or recommend which codes are preferable

Development of graphic display program of reactor operating parameters for emergency exercise at nuclear power plants

International Nuclear Information System (INIS)

Okuda, Yasunori; Yoshida, Yoshitaka; Gotou, Kazuko

2001-01-01

A scenario of nuclear emergency exercise based on the result of accident progress analysis is expected to ensure effective training. Thereupon a new graphic display program for reactor operating parameters has been developed to present real-time of plant process values (parameters), released radioactivities from the plant, and dose rate data around the site calculated by using the accident analysis code MAAP4 and other codes. This system has a trend graph screen displaying reactor operating parameters, an environmental dose rate summary screen indicating dose rate distribution around the site on the map, and a plant parameters summary screen showing important plant parameters on a simplified plant system diagram. One screen can be switched to another any time. It also has a jump-function easily accessing any stage during the exercise scenario in accordance with progress of the exercise. As a result of the application of this system to a real nuclear emergency exercise, it has been verified that this system is quite useful for confirming the parameters when the nuclear emergency exercise starts and the licensee reports the plant conditions to related bodied. (author)

Development of graphic display program of reactor operating parameters for emergency exercise at nuclear power plants

Energy Technology Data Exchange (ETDEWEB)

Okuda, Yasunori; Yoshida, Yoshitaka [Institute of Nuclear Safety System Inc., Mihama, Fukui (Japan); Gotou, Kazuko [Kansai Electric Power Co., Inc., Osaka (Japan)

2001-09-01

A scenario of nuclear emergency exercise based on the result of accident progress analysis is expected to ensure effective training. Thereupon a new graphic display program for reactor operating parameters has been developed to present real-time of plant process values (parameters), released radioactivities from the plant, and dose rate data around the site calculated by using the accident analysis code MAAP4 and other codes. This system has a trend graph screen displaying reactor operating parameters, an environmental dose rate summary screen indicating dose rate distribution around the site on the map, and a plant parameters summary screen showing important plant parameters on a simplified plant system diagram. One screen can be switched to another any time. It also has a jump-function easily accessing any stage during the exercise scenario in accordance with progress of the exercise. As a result of the application of this system to a real nuclear emergency exercise, it has been verified that this system is quite useful for confirming the parameters when the nuclear emergency exercise starts and the licensee reports the plant conditions to related bodied. (author)

Soil sampling intercomparison exercise by selected laboratories of the ALMERA Network

International Nuclear Information System (INIS)

2009-01-01

The IAEA's Seibersdorf Laboratories in Austria have the programmatic responsibility to provide assistance to Member State laboratories in maintaining and improving the reliability of analytical measurement results, both in radionuclide and trace element determinations. This is accomplished through the provision of reference materials of terrestrial origin, validated analytical procedures, training in the implementation of internal quality control, and through the evaluation of measurement performance by the organization of worldwide and regional interlaboratory comparison exercises. The IAEA is mandated to support global radionuclide measurement systems related to accidental or intentional releases of radioactivity in the environment. To fulfil this obligation and ensure a reliable, worldwide, rapid and consistent response, the IAEA coordinates an international network of analytical laboratories for the measurement of environmental radioactivity (ALMERA). The network was established by the IAEA in 1995 and makes available to Member States a world-wide network of analytical laboratories capable of providing reliable and timely analysis of environmental samples in the event of an accidental or intentional release of radioactivity. A primary requirement for the ALMERA members is participation in the IAEA interlaboratory comparison exercises, which are specifically organized for ALMERA on a regular basis. These exercises are designed to monitor and demonstrate the performance and analytical capabilities of the network members, and to identify gaps and problem areas where further development is needed. In this framework, the IAEA organized a soil sampling intercomparison exercise (IAEA/SIE/01) for selected laboratories of the ALMERA network. The main objective of this exercise was to compare soil sampling procedures used by different participating laboratories. The performance evaluation results of the interlaboratory comparison exercises performed in the framework of

The 1992 ENDF Pre-processing codes

International Nuclear Information System (INIS)

Cullen, D.E.

1992-01-01

This document summarizes the 1992 version of the ENDF pre-processing codes which are required for processing evaluated nuclear data coded in the format ENDF-4, ENDF-5, or ENDF-6. Included are the codes CONVERT, MERGER, LINEAR, RECENT, SIGMA1, LEGEND, FIXUP, GROUPIE, DICTION, MIXER, VIRGIN, COMPLOT, EVALPLOT, RELABEL. Some of the functions of these codes are: to calculate cross-sections from resonance parameters; to calculate angular distributions, group average, mixtures of cross-sections, etc; to produce graphical plottings and data comparisons. The codes are designed to operate on virtually any type of computer including PC's. They are available from the IAEA Nuclear Data Section, free of charge upon request, on magnetic tape or a set of HD diskettes. (author)

Simulation of the distribution of flow and phases in vertical and horizontal bundles using the ASSERT-4 subchannel code

International Nuclear Information System (INIS)

Carver, M.B.; Tahir, A.; Kiteley, J.C.; Banas, A.O.; Rowe, D.S.; Midvidy, W.I.

1990-01-01

ASSERT-4 is a subchannel code based on the non-equilibrium equations of two-fluid flow. The paper briefly describes the equations and constitutive models used in the code, and reviews a number of validation exercises in which code results were compared to measurements in vertical and horizontal two-phase flows. (orig.)

Impact testing and analysis for structural code benchmarking

International Nuclear Information System (INIS)

Glass, R.E.

1989-01-01

Sandia National Laboratories, in cooperation with industry and other national laboratories, has been benchmarking computer codes used to predict the structural, thermal, criticality, and shielding behavior of radioactive materials packages. The first step in the benchmarking of the codes was to develop standard problem sets and to compare the results from several codes and users. This step for structural analysis codes has been completed as described in Structural Code Benchmarking for the Analysis of Impact Response of Nuclear Material Shipping Casks, R.E. Glass, Sandia National Laboratories, 1985. The problem set is shown in Fig. 1. This problem set exercised the ability of the codes to predict the response to end (axisymmetric) and side (plane strain) impacts with both elastic and elastic/plastic materials. The results from these problems showed that there is good agreement in predicting elastic response. Significant differences occurred in predicting strains for the elastic/plastic models. An example of the variation in predicting plastic behavior is given, which shows the hoop strain as a function of time at the impacting end of Model B. These differences in predicting plastic strains demonstrated a need for benchmark data for a cask-like problem

Verification of 3-D generation code package for neutronic calculations of WWERs

International Nuclear Information System (INIS)

Sidorenko, V.D.; Aleshin, S.S.; Bolobov, P.A.; Bolshagin, S.N.; Lazarenko, A.P.; Markov, A.V.; Morozov, V.V.; Syslov, A.A.; Tsvetkov, V.M.

2000-01-01

Materials on verification of the 3 -d generation code package for WWERs neutronic calculations are presented. The package includes: - spectral code TVS-M; - 2-D fine mesh diffusion code PERMAK-A for 4- or 6-group calculation of WWER core burnup; - 3-D coarse mesh diffusion code BIPR-7A for 2-group calculations of quasi-stationary WWERs regimes. The materials include both TVS-M verification data and verification data on PERMAK-A and BIPR-7A codes using constant libraries generated with TVS-M. All materials are related to the fuel without Gd. TVS-M verification materials include results of comparison both with benchmark calculations obtained by other codes and with experiments carried out at ZR-6 critical facility. PERMAK-A verification materials contain results of comparison with TVS-M calculations and with ZR-6 experiments. BIPR-7A materials include comparison with operation data for Dukovany-2 and Loviisa-1 NPPs (WWER-440) and for Balakovo NPP Unit 4 (WWER-1000). The verification materials demonstrate rather good accuracy of calculations obtained with the use of code package of the 3 -d generation. (Authors)

Quantitative code accuracy evaluation of ISP33

Energy Technology Data Exchange (ETDEWEB)

Kalli, H.; Miwrrin, A. [Lappeenranta Univ. of Technology (Finland); Purhonen, H. [VTT Energy, Lappeenranta (Finland)] [and others

1995-09-01

Aiming at quantifying code accuracy, a methodology based on the Fast Fourier Transform has been developed at the University of Pisa, Italy. The paper deals with a short presentation of the methodology and its application to pre-test and post-test calculations submitted to the International Standard Problem ISP33. This was a double-blind natural circulation exercise with a stepwise reduced primary coolant inventory, performed in PACTEL facility in Finland. PACTEL is a 1/305 volumetrically scaled, full-height simulator of the Russian type VVER-440 pressurized water reactor, with horizontal steam generators and loop seals in both cold and hot legs. Fifteen foreign organizations participated in ISP33, with 21 blind calculations and 20 post-test calculations, altogether 10 different thermal hydraulic codes and code versions were used. The results of the application of the methodology to nine selected measured quantities are summarized.

Optimizing Cardiovascular Benefits of Exercise: A Review of Rodent Models

Science.gov (United States)

Davis, Brittany; Moriguchi, Takeshi; Sumpio, Bauer

2013-01-01

Although research unanimously maintains that exercise can ward off cardiovascular disease (CVD), the optimal type, duration, intensity, and combination of forms are yet not clear. In our review of existing rodent-based studies on exercise and cardiovascular health, we attempt to find the optimal forms, intensities, and durations of exercise. Using Scopus and Medline, a literature review of English language comparative journal studies of cardiovascular benefits and exercise was performed. This review examines the existing literature on rodent models of aerobic, anaerobic, and power exercise and compares the benefits of various training forms, intensities, and durations. The rodent studies reviewed in this article correlate with reports on human subjects that suggest regular aerobic exercise can improve cardiac and vascular structure and function, as well as lipid profiles, and reduce the risk of CVD. Findings demonstrate an abundance of rodent-based aerobic studies, but a lack of anaerobic and power forms of exercise, as well as comparisons of these three components of exercise. Thus, further studies must be conducted to determine a truly optimal regimen for cardiovascular health. PMID:24436579

Exercise for people with hip or knee osteoarthritis: a comparison of land-based and aquatic interventions

Directory of Open Access Journals (Sweden)

Ann E Rahmann

2010-07-01

Full Text Available Ann E RahmannDivision of Physiotherapy, School of Health and Rehabilitation Sciences, The University of Queensland, St Lucia, Queensland, AustraliaAbstract: Expert opinion considers the referral of people with osteoarthritis (OA for physiotherapy to be a core component of managing the functional disability and pain of the disease. Clinical guidelines for the physiotherapy management of people with OA focus on three main areas: exercise, pain relief, and specific manual therapy techniques. Land-based group and individual physiotherapy exercise programs, as well as manual therapy, have demonstrated a distinct benefit in favor of physiotherapy intervention. Similarly, both general and specific aquatic physiotherapy exercise programs have shown positive outcomes for people with OA. This review will focus primarily on therapeutic exercise to improve strength and fitness and reduce pain in people with hip or knee OA. An overview of the principles of hydrodynamics relevant to aquatic exercise is also included to facilitate an understanding of effective aquatic exercise programs. The issue of compliance with exercise programs will also be discussed. Clinicians will, therefore, gain an understanding of the benefits of land-based and aquatic exercise for people with OA.Keywords: exercise, physical therapy, aquatic therapy, hip and knee osteoarthritis, strength, pain, aerobic exercise

Timing comparison of two-dimensional discrete-ordinates codes for criticality calculations

International Nuclear Information System (INIS)

Miller, W.F. Jr.; Alcouffe, R.E.; Bosler, G.E.; Brinkley, F.W. Jr.; O'dell, R.D.

1979-01-01

The authors compare two-dimensional discrete-ordinates neutron transport computer codes to solve reactor criticality problems. The fundamental interest is in determining which code requires the minimum Central Processing Unit (CPU) time for a given numerical model of a reasonably realistic fast reactor core and peripherals. The computer codes considered are the most advanced available and, in three cases, are not officially released. The conclusion, based on the study of four fast reactor core models, is that for this class of problems the diffusion synthetic accelerated version of TWOTRAN, labeled TWOTRAN-DA, is superior to the other codes in terms of CPU requirements

Spread-spectrum communication using binary spatiotemporal chaotic codes

International Nuclear Information System (INIS)

Wang Xingang; Zhan Meng; Gong Xiaofeng; Lai, C.H.; Lai, Y.-C.

2005-01-01

We propose a scheme to generate binary code for baseband spread-spectrum communication by using a chain of coupled chaotic maps. We compare the performances of this type of spatiotemporal chaotic code with those of a conventional code used frequently in digital communication, the Gold code, and demonstrate that our code is comparable or even superior to the Gold code in several key aspects: security, bit error rate, code generation speed, and the number of possible code sequences. As the field of communicating with chaos faces doubts in terms of performance comparison with conventional digital communication schemes, our work gives a clear message that communicating with chaos can be advantageous and it deserves further attention from the nonlinear science community

CONSUL code package application for LMFR core calculations

Energy Technology Data Exchange (ETDEWEB)

Chibinyaev, A.V.; Teplov, P.S.; Frolova, M.V. [RNC ' Kurchatovskiy institute' , Kurchatov sq.1, Moscow (Russian Federation)

2008-07-01

CONSUL code package designed for the calculation of reactor core characteristics has been developed at the beginning of 90's. The calculation of nuclear reactor core characteristics is carried out on the basis of correlated neutron, isotope and temperature distributions. The code package has been generally used for LWR core characteristics calculations. At present CONSUL code package was adapted to calculate liquid metal fast reactors (LMFR). The comparisons with IAEA computational test 'Evaluation of benchmark calculations on a fast power reactor core with near zero sodium void effect' and BN-1800 testing calculations are presented in the paper. The IAEA benchmark core is based on the innovative core concept with sodium plenum above the core BN-800. BN-1800 core is the next development step which is foreseen for the Russian fast reactor concept. The comparison of the operational parameters has shown good agreement and confirms the possibility of CONSUL code package application for LMFR core calculation. (authors)

The effectiveness of the treatment of severe exercise-induced asthma in schoolchildren

Directory of Open Access Journals (Sweden)

M.N. Garas

2017-03-01

Full Text Available Background. Bronchial asthma is one of the most common chronic multifactorial diseases of the lungs. At least 10–12 % of patients with bronchial asthma are suffering from a severe form of the disease. One aspect of inadequate severe asthma control is its phenotypic heterogeneity, interest of experts increases to the problem of exercise-induced asthma. The purpose of the study was to increase efficiency of treatment for severe exercise-induced asthma in schoolchildren based on the analysis of the attack dynamics and to achieve disease control according to main inflammatometric and spirometric indices. Materials and methods. We examined 46 children with severe persistent bronchial asthma, in particular, 15 schoolchildren suffering from severe exercise-induced asthma, the second clinical group (comparison one consisted of 31 children suffering from severe type of the disease, with no signs of exercise-induced bronchoconstriction. Basic therapy effectiveness was determined prospectively by assessing the disease control using AST-test with an interval of 3 months. The severity of bronchial obstruction syndrome in patients on admission to hospital during exacerbation was assessed by score scale. Airway hyperresponsiveness was evaluated according to the results of bronchoprovocation with histamine. Results. Children of I clinical group had more significant manifestations of bronchial obstruction during the week of inpatient treatment than the comparison group of patients, including significantly more severe manifestations of bronchial obstruction were verified on 1st and 7th day of hospitalization. Due to the analysis of basic therapy effectiveness, only a quarter of I clinical group patients and a larger part of schoolchildren in comparison group achieved the partial control after a 3-month course of anti-inflammatory treatment. Eosinophilic inflammation was observed in most children with severe exercise-induced asthma (60.1 % and in 47.2 % of

Impaired cardiopulmonary exercise capacity in patients with hyperthyroidism.

Science.gov (United States)

Kahaly, G; Hellermann, J; Mohr-Kahaly, S; Treese, N

1996-01-01

Hyperthyroidism (H) has been implicated as a primary cause of decreased exercise tolerance. To our knowledge, analysis of respiratory gas exchange, an efficient noninvasive method in evaluating cardiopulmonary capacity, has not been performed in patients with H. Using cardiopulmonary exercise testing, 12 consecutive women with Graves' H were examined and controlled in euthyroidism (E). Eighteen women with E, in whom cardiac catheterization had ruled out heart disease, served as control subjects (C). The ventilatory anaerobic threshold was determined by means of the V-slope method. Ergometry was performed with patients in a semisupine position using a continuous ramp protocol of 20 W/min. Echocardiography at rest was performed in all patients. In patients with H, heart rate at rest was higher than in patients with E (p lower increase between rest and anaerobic threshold compared with E patients (p = 0.007) and C (p = 0.009). Work rate was reduced (H, 50% vs E, 70%; p = 0.038). In H patients, the anaerobic threshold occurred at 59.6% of maximal oxygen uptake and 72% in E patients, respectively (p = 0.024). In H patients, the linear regression of the heart rate to oxygen uptake ratio showed a reduced slope in comparison with E patients (p = 0.001) and C (p = 0.004). In patients with H, a reduced tidal volume (p = 0.021) and an increased respiratory rate (p = 0.003) in comparison to patients with E were demonstrated. Echocardiographically, H patients had an increased ejection fraction (p = 0.008) and a higher cardiac index (p = 0.008) in comparison with E patients. Analysis of respiratory gas exchange showed marked alterations of cardiopulmonary exercise capacity in H patients, which are reversible in E patients. The impaired chronotropic response during exercise might be the primary limiting factor of reduced work capacity in patients with H.

Draft-Report on the RTOP-Code Simulations in the Fumex-3 Exercises

International Nuclear Information System (INIS)

Likhanskii, V.

2013-01-01

The RTOP-code is used for prediction of the following main parameters of a fuel rod during irradiation: - internal gas pressure in fuel rods - mechanical stresses in cladding and fuel pellets due to PCMI. Simulation of fuel behavior by the RTOP-code is based on various physical models. 1. Thermal models. 2. Evolution of Burnup and Pu distribution in the fuel rod during irradiation. 3. Fission gas release models. 4. Models of microstructure evolution of the fuel. 5. Mechanical stresses models and models for description of plastic deformations of fuel and cladding. (author)

Thermal-hydraulic codes validation for safety analysis of NPPs with RBMK

International Nuclear Information System (INIS)

Brus, N.A.; Ioussoupov, O.E.

2000-01-01

This work is devoted to validation of western thermal-hydraulic codes (RELAP5/MOD3 .2 and ATHLET 1.1 Cycle C) in application to Russian designed light water reactors. Such validation is needed due to features of RBMK reactor design and thermal-hydraulics in comparison with PWR and BWR reactors, for which these codes were developed and validated. These validation studies are concluded with a comparison of calculation results of modeling with the thermal-hydraulics codes with the experiments performed earlier using the thermal-hydraulics test facilities with the experimental data. (authors)

Comparison of three gamma ray isotopic determination codes: FRAM, MGA, and TRIFID

International Nuclear Information System (INIS)

Cremers, T.L.; Malcom, J.E.; Bonner, C.A.

1994-01-01

The determination of the isotopic distribution of plutonium and the americium concentration is required for the assay of nuclear material by calorimetry or neutron coincidence counting. The isotopic information is used in calorimetric assay to compute the effective specific power from the measured isotopic fractions and the known specific power of each isotope. The effective specific power is combined with the heat measurement to obtain the mass of plutonium in the assayed nuclear material. The response of neutron coincidence counters is determined by the 240 Pu isotopic fraction with contributions from the other even plutonium isotopes. The effect of the 240 Pu isotopic fraction and the other neutron contributing isotopes are combined as 240 Pu effective. This is used to calculate the mass of nuclear material from the neutron counting data in a manner analogous to the effective specific power in calorimeter. Comparisons of the precision and accuracy of calorimetric assay and neutron coincidence counting often focus only on the precision and accuracy of the heat measurement (calorimetry) compared to the precision and accuracy of the neutron coincidence counting statistics. The major source of uncertainty for both calorimetric assay and neutron coincidence counting often lies in the determination of the plutonium isotopic distribution ad determined by gamma ray spectroscopy. Thus, the selection of the appropriate isotopic distribution code is of paramount importance to good calorimetric assay and neutron coincidence counting. Three gamma ray isotopic distribution codes, FRAM, MGA, and TRIFID have been compared at the Los Alamos Plutonium Facility under carefully controlled conditions of similar count rates, count times, and 240 Pu isotopic fraction

Short-Block Protograph-Based LDPC Codes

Science.gov (United States)

Divsalar, Dariush; Dolinar, Samuel; Jones, Christopher

2010-01-01

Short-block low-density parity-check (LDPC) codes of a special type are intended to be especially well suited for potential applications that include transmission of command and control data, cellular telephony, data communications in wireless local area networks, and satellite data communications. [In general, LDPC codes belong to a class of error-correcting codes suitable for use in a variety of wireless data-communication systems that include noisy channels.] The codes of the present special type exhibit low error floors, low bit and frame error rates, and low latency (in comparison with related prior codes). These codes also achieve low maximum rate of undetected errors over all signal-to-noise ratios, without requiring the use of cyclic redundancy checks, which would significantly increase the overhead for short blocks. These codes have protograph representations; this is advantageous in that, for reasons that exceed the scope of this article, the applicability of protograph representations makes it possible to design highspeed iterative decoders that utilize belief- propagation algorithms.

MARS-KS code validation activity through the atlas domestic standard problem

International Nuclear Information System (INIS)

Choi, K. Y.; Kim, Y. S.; Kang, K. H.; Park, H. S.; Cho, S.

2012-01-01

The 2 nd Domestic Standard Problem (DSP-02) exercise using the ATLAS integral effect test data was executed to transfer the integral effect test data to domestic nuclear industries and to contribute to improving the safety analysis methodology for PWRs. A small break loss of coolant accident of a 6-inch break at the cold leg was determined as a target scenario by considering its technical importance and by incorporating interests from participants. Ten calculation results using MARS-KS code were collected, major prediction results were described qualitatively and code prediction accuracy was assessed quantitatively using the FFTBM. In addition, special code assessment activities were carried out to find out the area where the model improvement is required in the MARS-KS code. The lessons from this DSP-02 and recommendations to code developers are described in this paper. (authors)

Design evaluation on sodium piping system and comparison of the design codes

International Nuclear Information System (INIS)

Lee, Dong Won; Jeong, Ji Young; Lee, Yong Bum; Lee, Hyeong Yeon

2015-01-01

A large-scale sodium test loop of STELLA-1 (Sodium integral effect test loop for safety simulation and assessment) with two main piping systems has been installed at KAERI. In this study, design evaluations on the main sodium piping systems in STELLA-1 have been conducted according to the DBR (design by rule) codes of the ASME B31.1 and RCC-MRx RB-3600. In addition, design evaluations according to the DBA (design by analysis) code of the ASME Section III Subsection NB-3200 have been conducted. The evaluation results for the present piping systems showed that results from the DBR codes were more conservative than those from the DBA code, and among the DBR codes, the non-nuclear code of the ASME B31.1 was more conservative than the French nuclear DBR code of the RCC-MRx RB-3600. The conservatism on the DBR codes of the ASME B31.1 and RCC-MRx RB-3600 was quantified based on the present sodium piping analyses.

Design evaluation on sodium piping system and comparison of the design codes

Energy Technology Data Exchange (ETDEWEB)

Lee, Dong Won; Jeong, Ji Young; Lee, Yong Bum; Lee, Hyeong Yeon [KAERI, Daejeon (Korea, Republic of)

2015-03-15

A large-scale sodium test loop of STELLA-1 (Sodium integral effect test loop for safety simulation and assessment) with two main piping systems has been installed at KAERI. In this study, design evaluations on the main sodium piping systems in STELLA-1 have been conducted according to the DBR (design by rule) codes of the ASME B31.1 and RCC-MRx RB-3600. In addition, design evaluations according to the DBA (design by analysis) code of the ASME Section III Subsection NB-3200 have been conducted. The evaluation results for the present piping systems showed that results from the DBR codes were more conservative than those from the DBA code, and among the DBR codes, the non-nuclear code of the ASME B31.1 was more conservative than the French nuclear DBR code of the RCC-MRx RB-3600. The conservatism on the DBR codes of the ASME B31.1 and RCC-MRx RB-3600 was quantified based on the present sodium piping analyses.

The analysis of thermal-hydraulic models in MELCOR code

Energy Technology Data Exchange (ETDEWEB)

Kim, M H; Hur, C; Kim, D K; Cho, H J [POhang Univ., of Science and TECHnology, Pohang (Korea, Republic of)

1996-07-15

The objective of the present work is to verify the prediction and analysis capability of MELCOR code about the progression of severe accidents in light water reactor and also to evaluate appropriateness of thermal-hydraulic models used in MELCOR code. Comparing the results of experiment and calculation with MELCOR code is carried out to achieve the above objective. Specially, the comparison between the CORA-13 experiment and the MELCOR code calculation was performed.

Assessment of systems codes and their coupling with CFD codes in thermal–hydraulic applications to innovative reactors

Energy Technology Data Exchange (ETDEWEB)

Bandini, G., E-mail: giacomino.bandini@enea.it [Italian National Agency for New Technologies, Energy and Sustainable Economic Development (ENEA) (Italy); Polidori, M. [Italian National Agency for New Technologies, Energy and Sustainable Economic Development (ENEA) (Italy); Gerschenfeld, A.; Pialla, D.; Li, S. [Commissariat à l’Energie Atomique (CEA) (France); Ma, W.M.; Kudinov, P.; Jeltsov, M.; Kööp, K. [Royal Institute of Technology (KTH) (Sweden); Huber, K.; Cheng, X.; Bruzzese, C.; Class, A.G.; Prill, D.P. [Karlsruhe Institute of Technology (KIT) (Germany); Papukchiev, A. [Gesellschaft für Anlagen- und Reaktorsicherheit (GRS) (Germany); Geffray, C.; Macian-Juan, R. [Technische Universität München (TUM) (Germany); Maas, L. [Institut de Radioprotection et de Sûreté Nucléaire (IRSN) (France)

2015-01-15

Highlights: • The assessment of RELAP5, TRACE and CATHARE system codes on integral experiments is presented. • Code benchmark of CATHARE, DYN2B, and ATHLET on PHENIX natural circulation experiment. • Grid-free pool modelling based on proper orthogonal decomposition for system codes is explained. • The code coupling methodologies are explained. • The coupling of several CFD/system codes is tested against integral experiments. - Abstract: The THINS project of the 7th Framework EU Program on nuclear fission safety is devoted to the investigation of crosscutting thermal–hydraulic issues for innovative nuclear systems. A significant effort in the project has been dedicated to the qualification and validation of system codes currently employed in thermal–hydraulic transient analysis for nuclear reactors. This assessment is based either on already available experimental data, or on the data provided by test campaigns carried out in the frame of THINS project activities. Data provided by TALL and CIRCE facilities were used in the assessment of system codes for HLM reactors, while the PHENIX ultimate natural circulation test was used as reference for a benchmark exercise among system codes for sodium-cooled reactor applications. In addition, a promising grid-free pool model based on proper orthogonal decomposition is proposed to overcome the limits shown by the thermal–hydraulic system codes in the simulation of pool-type systems. Furthermore, multi-scale system-CFD solutions have been developed and validated for innovative nuclear system applications. For this purpose, data from the PHENIX experiments have been used, and data are provided by the tests conducted with new configuration of the TALL-3D facility, which accommodates a 3D test section within the primary circuit. The TALL-3D measurements are currently used for the validation of the coupling between system and CFD codes.

CHANGES IN PAIN PERCEPTION IN WOMEN DURING AND FOLLOWING AN EXHAUSTIVE INCREMENTAL CYCLING EXERCISE

Directory of Open Access Journals (Sweden)

Daniel G. Drury

2005-09-01

Full Text Available Exercise has been found to alter pain sensitivity with a hypoalgesic response (i.e., diminished sensitivity to pain typically reported during and/or following high intensity exercise. Most of this research, however, has involved the testing of men. Thus, the purpose of the following investigation was to examine changes in pain perception in women during and following exercise. Seventeen healthy female subjects (age 20.47±.87; VO2 peak 36.77± 4.95 volunteered to undergo pain assessment prior to, during, and after a graded exhaustive VO2 peak cycling challenge. Heart Rate (HR and Oxygen Uptake (VO2 were monitored along with electro-diagnostic assessments of Pain Threshold (PT and Pain Tolerance (PTOL at: 1 baseline (B, 2 during exercise (i.e., 120 Watts, 3 at exhaustive intensity (VO2 peak, and 4 10 minutes into recovery (R. Data were analyzed using repeated measures ANOVA to determine differences across trials. Significant differences in PT and PTOL were found across trials (PT, p = 0.0043; PTOL p = 0.0001. Post hoc analyses revealed that PT were significantly elevated at VO2 peak in comparison to B (p = 0.007, 120 Watts (p = 0.0178 and R (p = 0.0072. PTOL were found to be significantly elevated at 120 Watts (p = 0.0247, VO2 peak (p < 0.001, and R (p = 0.0001 in comparison to B. In addition, PTOL were found to be significantly elevated at VO2 peak in comparison to 120 Watts (p = 0.0045. It is concluded that exercise-induced hypoalgesia occurs in women during and following exercise, with the hypoalgesic response being most pronounced following exhaustive exercise

The Generic Containment SB-LOCA accident simulation: Comparison of the parameter uncertainties and user-effect

International Nuclear Information System (INIS)

Povilaitis, Mantas; Kelm, Stephan; Urbonavičius, Egidijus

2017-01-01

Highlights: • Uncertainty and sensitivity analysis for the Generic Containment severe accident. • Comparison of the analysis results with the uncertainties based in the user effect. • Demonstration of the similar importance of both the reducing the user effect and input uncertainties. - Abstract: Uncertainties in safety assessment of the nuclear power plants using computer codes come from several sources: choice of computer code, user effect (a strong impact of user choices on the simulation’s outcome) and uncertainty of various physical parameters. The “Generic Containment” activity was performed in the frames of the EU-FP7 project SARNET2 to investigate the influence of user effect and computer code choice on the results on the nuclear power plant scale. During this activity, a Generic Containment nodalisation was developed and used for exercise by the participants applying various computer codes. Even though the model of the Generic Containment and the transient scenario were precisely and uniquely defined, considerably different results were obtained not only among different codes but also among participants using the same code, showing significant influence of the user effect. This paper present analysis, which is an extension of the “Generic Containment” benchmark and investigates the effect of input parameter’s uncertainties in comparison to the user effect. Calculations were performed using the computer code ASTEC, the uncertainty and sensitivity of the results were estimated using GRS method and tool SUSA. The results of the present analysis show, that while there are differences between the uncertainty bands of the parameters, in general the deviation bands caused by parameters’ uncertainty and the user effect are comparable and of the same order. The properties of concrete and the surface areas may have more influence on containment pressure than the user effect and choice of computer code as identified in the SARNET2 Generic

Effects of Secondary Circuit Modeling on Results of Pressurized Water Reactor Main Steam Line Break Benchmark Calculations with New Coupled Code TRAB-3D/SMABRE

International Nuclear Information System (INIS)

Daavittila, Antti; Haemaelaeinen, Anitta; Kyrki-Rajamaeki, Riitta

2003-01-01

All of the three exercises of the Organization for Economic Cooperation and Development/Nuclear Regulatory Commission pressurized water reactor main steam line break (PWR MSLB) benchmark were calculated at VTT, the Technical Research Centre of Finland. For the first exercise, the plant simulation with point-kinetic neutronics, the thermal-hydraulics code SMABRE was used. The second exercise was calculated with the three-dimensional reactor dynamics code TRAB-3D, and the third exercise with the combination TRAB-3D/SMABRE. VTT has over ten years' experience of coupling neutronic and thermal-hydraulic codes, but this benchmark was the first time these two codes, both developed at VTT, were coupled together. The coupled code system is fast and efficient; the total computation time of the 100-s transient in the third exercise was 16 min on a modern UNIX workstation. The results of all the exercises are similar to those of the other participants. In order to demonstrate the effect of secondary circuit modeling on the results, three different cases were calculated. In case 1 there is no phase separation in the steam lines and no flow reversal in the aspirator. In case 2 the flow reversal in the aspirator is allowed, but there is no phase separation in the steam lines. Finally, in case 3 the drift-flux model is used for the phase separation in the steam lines, but the aspirator flow reversal is not allowed. With these two modeling variations, it is possible to cover a remarkably broad range of results. The maximum power level reached after the reactor trip varies from 534 to 904 MW, the range of the time of the power maximum being close to 30 s. Compared to the total calculated transient time of 100 s, the effect of the secondary side modeling is extremely important

Boiling water reactor turbine trip (TT) benchmark. Volume II: Summary Results of Exercise 1

International Nuclear Information System (INIS)

Akdeniz, Bedirhan; Ivanov, Kostadin N.; Olson, Andy M.

2005-06-01

The OECD Nuclear Energy Agency (NEA) completed under US Nuclear Regulatory Commission (NRC) sponsorship a PWR main steam line break (MSLB) benchmark against coupled system three-dimensional (3-D) neutron kinetics and thermal-hydraulic codes. Another OECD/NRC coupled-code benchmark was recently completed for a BWR turbine trip (TT) transient and is the object of the present report. Turbine trip transients in a BWR are pressurisation events in which the coupling between core space-dependent neutronic phenomena and system dynamics plays an important role. The data made available from actual experiments carried out at the Peach Bottom 2 plant make the present benchmark particularly valuable. While defining and coordinating the BWR TT benchmark, a systematic approach and level methodology not only allowed for a consistent and comprehensive validation process, but also contributed to the study of key parameters of pressurisation transients. The benchmark consists of three separate exercises, two initial states and five transient scenarios. The BWR TT Benchmark will be published in four volumes as NEA reports. CD-ROMs will also be prepared and will include the four reports and the transient boundary conditions, decay heat values as a function of time, cross-section libraries and supplementary tables and graphs not published in the paper version. BWR TT Benchmark - Volume I: Final Specifications was issued in 2001 [NEA/NSC/DOC(2001)]. The benchmark team [Pennsylvania State University (PSU) in co-operation with Exelon Nuclear and the NEA] has been responsible for coordinating benchmark activities, answering participant questions and assisting them in developing their models, as well as analysing submitted solutions and providing reports summarising the results for each phase. The benchmark team has also been involved in the technical aspects of the benchmark, including sensitivity studies for the different exercises. Volume II summarises the results for Exercise 1 of the

AFFECTIVE RESPONSES AFTER DIFFERENT INTENSITIES OF EXERCISE IN PATIENTS WITH TRAUMATIC BRAIN INJURY

Directory of Open Access Journals (Sweden)

Patricia eRzezak

2015-06-01

Full Text Available BACKGROUND: Patients with traumatic brain injury (TBI usually have mood and anxiety symptoms secondary to their brain injury. Exercise may be a cost-effective intervention for the regulation of the affective responses of this population. However, there are no studies evaluating the effects of exercise or the optimal intensity of exercise for this clinical group. METHODS: Twelve male patients with moderate or severe TBI [mean age of 31.83 and SD of 9.53] and 12 age- and gender-matched healthy volunteers [mean age of 30.58 and SD of 9.53] participated in two sessions of exercise of high and moderate intensity. Anxiety and mood was evaluated, and subjective assessment of experience pre- and post-exercise was assessed. A mixed between and within-subjects GLM analysis was conducted to compare groups [TBI, control] over condition [baseline, session 1, session 2] allowing for group by condition interaction to be determined. Planned comparisons were also conducted to test study hypotheses.RESULTS: Although no group by condition interaction was observed, planned comparisons indicated that baseline differences between patients and controls in anxiety (Cohens’ d=1.80, tension (d=1.31, depression (d=1.18, anger (d=1.08, confusion (d=1.70, psychological distress (d=1.28 and physical symptoms (d=1.42 disappear after one session of exercise, independently of the intensity of exercise. CONCLUSIONS: A single-section of exercise, regardless of exercise intensity, had a positive effect on the affective responses of patients with TBI both by increasing positive valence feelings and decreasing negative ones. Exercise can be an easily accessible intervention that may alleviate depressive symptoms related to brain injury.

A mixed methods comparison of perceived benefits and barriers to exercise between obese and nonobese women.

Science.gov (United States)

Leone, Lucia Andrea; Ward, Dianne S

2013-05-01

Obese women have lower levels of physical activity than nonobese women, but it is unclear what drives these differences. Mixed methods were used to understand why obese women have lower physical activity levels. Findings from focus groups with obese white women age 50 and older (N = 19) were used to develop psychosocial items for an online survey of white women (N = 195). After examining the relationship between weight group (obese vs. nonobese) and exercise attitudes, associated items (P exercise (OR = 0.4, 95% CI 0.2-0.8) and were more likely to agree their weight makes exercise difficult (OR = 10.6, 95% CI 4.2-27.1), and they only exercise when trying to lose weight (OR = 3.8, 95% CI 1.6-8.9). Enjoyment and exercise for weight loss were statistically significant mediators of the relationship between weight and physical activity. Exercise interventions for obese women may be improved by focusing on exercise enjoyment and the benefits of exercise that are independent of weight loss.

Comparison of two-dimensional and three-dimensional MHD equilibrium and stability codes

International Nuclear Information System (INIS)

Herrnegger, F.; Merkel, P.; Johnson, J.L.

1986-02-01

Stability results obtained with the fully three-dimensional magnetohydrodynamic code BETA, the helically invariant code HERA, and the asymptotic stellarator expansion code STEP agree well for a straight l = 2, M = 5 stellarator model. This good agreement between the BETA and STEP codes persists as toroidal curvature is introduced. This validation provides justification for confidence in work with these models. 20 refs., 11 figs

GEDAE-LaB: A Free Software to Calculate the Energy System Contributions during Exercise.

Science.gov (United States)

Bertuzzi, Rômulo; Melegati, Jorge; Bueno, Salomão; Ghiarone, Thaysa; Pasqua, Leonardo A; Gáspari, Arthur Fernandes; Lima-Silva, Adriano E; Goldman, Alfredo

2016-01-01

The aim of the current study is to describe the functionality of free software developed for energy system contributions and energy expenditure calculation during exercise, namely GEDAE-LaB. Eleven participants performed the following tests: 1) a maximal cycling incremental test to measure the ventilatory threshold and maximal oxygen uptake (V̇O2max); 2) a cycling workload constant test at moderate domain (90% ventilatory threshold); 3) a cycling workload constant test at severe domain (110% V̇O2max). Oxygen uptake and plasma lactate were measured during the tests. The contributions of the aerobic (AMET), anaerobic lactic (LAMET), and anaerobic alactic (ALMET) systems were calculated based on the oxygen uptake during exercise, the oxygen energy equivalents provided by lactate accumulation, and the fast component of excess post-exercise oxygen consumption, respectively. In order to assess the intra-investigator variation, four different investigators performed the analyses independently using GEDAE-LaB. A direct comparison with commercial software was also provided. All subjects completed 10 min of exercise at moderate domain, while the time to exhaustion at severe domain was 144 ± 65 s. The AMET, LAMET, and ALMET contributions during moderate domain were about 93, 2, and 5%, respectively. The AMET, LAMET, and ALMET contributions during severe domain were about 66, 21, and 13%, respectively. No statistical differences were found between the energy system contributions and energy expenditure obtained by GEDAE-LaB and commercial software for both moderate and severe domains (P > 0.05). The ICC revealed that these estimates were highly reliable among the four investigators for both moderate and severe domains (all ICC ≥ 0.94). These findings suggest that GEDAE-LaB is a free software easily comprehended by users minimally familiarized with adopted procedures for calculations of energetic profile using oxygen uptake and lactate accumulation during exercise. By

Coding training for medical students: How good is diagnoses coding with ICD-10 by novices?

Directory of Open Access Journals (Sweden)

Stausberg, Jürgen

2005-04-01

Full Text Available Teaching of knowledge and competence in documentation and coding is an essential part of medical education. Therefore, coding training had been placed within the course of epidemiology, medical biometry, and medical informatics. From this, we can draw conclusions about the quality of coding by novices. One hundred and eighteen students coded diagnoses from 15 nephrological cases in homework. In addition to interrater reliability, validity was calculated by comparison with a reference coding. On the level of terminal codes, 59.3% of the students' results were correct. The completeness was calculated as 58.0%. The results on the chapter level increased up to 91.5% and 87.7% respectively. For the calculation of reliability a new, simple measure was developed that leads to values of 0.46 on the level of terminal codes and 0.87 on the chapter level for interrater reliability. The figures of concordance with the reference coding are quite similar. In contrary, routine data show considerably lower results with 0.34 and 0.63 respectively. Interrater reliability and validity of coding by novices is as good as coding by experts. The missing advantage of experts could be explained by the workload of documentation and a negative attitude to coding on the one hand. On the other hand, coding in a DRG-system is handicapped by a large number of detailed coding rules, which do not end in uniform results but rather lead to wrong and random codes. Anyway, students left the course well prepared for coding.

Impact of exercise type and dose on pain and disability in knee osteoarthritis

DEFF Research Database (Denmark)

Juhl, Carsten Bogh; Christensen, Robin Daniel Kjersgaard; Roos, Ewa M.

2011-01-01

that it will not always imply benefit in comparison with a matched control group. Stratified analyses provide evidence that exercise programs aiming at improving strength, aerobic capacity or functional performance are more efficacious than combined exercise programs. While the number of supervised sessions may enhance...... the benefits of the aerobic exercise, focusing on the quadriceps only, may increase benefits of resistance training.......TITLE: Impact of exercise type and dose on pain and disability in knee osteoarthritis: A systematic review and meta-regression analysis PURPOSE: To analyze the effect of published exercise therapy programs aimed at reducing pain in patients with osteoarthritis (OA) in the knee, in order to identify...

FARO test L-14 on fuel coolant interaction and quenching. Comparison report, volume 1 + 2, analysis of the results

International Nuclear Information System (INIS)

Annunziato, A.; Addabbo, C.; Yerkess, A.; Silverii, R.; Brewka, W.; Leva, G.

1997-01-01

This report provides a comparative analysis of the results from the ISP-39 exercise promoted by OECD-CSNI in the frame of the NEA activities. ISP-39 has been conceived to benchmark the predictive capabilities of computer codes used in the evaluation of fuel-coolant interaction (FCI) and quenching phenomenologies of relevance in water cooled reactors severe accidents safety analysis. The ISP-39 reference case is FARO test L-14, a non-energetic FCI test performed under realistic melt composition and prototypical accident conditions in the FARO experimental installation (Ispra, Italy). Thirteen research organizations from ten countries participated in the exercise submitting 15 prediction calculations with 8 different codes or code versions (COMETA, MC3D, IVA, IFCI, JASMINE, TEXAS, THIRMAL, VAPEX). ISP-39 was conducted as an open exercise. Conclusions are given concerning code capabilities, users effect and sensitivity analyses, numerical accuracy quantification of the predictions, code improvements, general considerations

Hypotensive Response Magnitude and Duration in Hypertensives: Continuous and Interval Exercise

Directory of Open Access Journals (Sweden)

Raphael Santos Teodoro de Carvalho

2015-03-01

Full Text Available Background: Although exercise training is known to promote post-exercise hypotension, there is currently no consistent argument about the effects of manipulating its various components (intensity, duration, rest periods, types of exercise, training methods on the magnitude and duration of hypotensive response. Objective: To compare the effect of continuous and interval exercises on hypotensive response magnitude and duration in hypertensive patients by using ambulatory blood pressure monitoring (ABPM. Methods: The sample consisted of 20 elderly hypertensives. Each participant underwent three ABPM sessions: one control ABPM, without exercise; one ABPM after continuous exercise; and one ABPM after interval exercise. Systolic blood pressure (SBP, diastolic blood pressure (DBP, mean arterial pressure (MAP, heart rate (HR and double product (DP were monitored to check post-exercise hypotension and for comparison between each ABPM. Results: ABPM after continuous exercise and after interval exercise showed post-exercise hypotension and a significant reduction (p < 0.05 in SBP, DBP, MAP and DP for 20 hours as compared with control ABPM. Comparing ABPM after continuous and ABPM after interval exercise, a significant reduction (p < 0.05 in SBP, DBP, MAP and DP was observed in the latter. Conclusion: Continuous and interval exercise trainings promote post-exercise hypotension with reduction in SBP, DBP, MAP and DP in the 20 hours following exercise. Interval exercise training causes greater post-exercise hypotension and lower cardiovascular overload as compared with continuous exercise.

Exercise-Based Interventions for Injury Prevention in Tackle Collision Ball Sports: A Systematic Review.

Science.gov (United States)

Sewry, Nicola; Verhagen, Evert; Lambert, Mike; van Mechelen, Willem; Viljoen, Wayne; Readhead, Clint; Brown, James

2017-09-01

The injury burden in collision sports is relatively high compared to other team sports. Therefore, participants in these sports would benefit by having effective injury prevention programs. Exercise-based interventions have successfully reduced injuries in soccer, but evidence on exercise-based interventions in tackle collision sports is limited. The objective of this review is to systematically examine the evidence of exercise-based intervention programs reducing injuries in tackle collision sports. PubMed, EBSCOHost, and Web of Science were searched for articles published between January 1995 and December 2015. The methodological quality was assessed using an adapted Cochrane Bone Joint and Muscle Trauma Group quality assessment tool. The inclusion criteria were (1) (randomized) control trials and observational studies; (2) sporting codes: American, Australian and Gaelic Football, rugby union, and rugby league; (3) participants of any age or sex; (4) exercise-based, prehabilitative intervention; and (5) primary outcome was injury rate or incidence (injury risk). The exclusion criteria were (1) unavailability of full-text; and (2) article unavailable in English. Nine studies with a total of 3517 participants were included in this review. Seven of these studies showed a significant decrease in injury risk. These studies included three sporting codes and various age groups, making it difficult to make inferences. The two highest methodological quality studies found no effect of an exercise-based intervention on injury risk. There is evidence that exercise-based injury preventions can be beneficial in reducing injury risk in collision sports, but more studies of high methodological quality are required.

High-intensity exercise and recovery during short-term ...

African Journals Online (AJOL)

Objective. To determine the effect of short-term creatine supplementation plus a protein-carbohydrate formula on high-intensity exercise performance and recovery. Design. A repeated-measures, experimental study, employing a randomised, double-blind, placebo-controlled, group comparison design was used.

Exercise ASKARI SERPENT: enabling clinical data collection during exercises and operations to support future contingency planning and assurance of category-based reporting systems.

Science.gov (United States)

Parsons, Iain T; Wheatley, R J; Carter, P

2016-02-01

Exercise ASKARI SERPENT (Ex AS) is a British Army exercise that provides primary healthcare (PHC) to Kenyan civilians in support of local health authorities. It is conducted in partnership with the Kenya Defence Force Medical Services (KDFMS). Accurate epidemiological data is critical in planning the exercise and for any future short-notice contingency operations in similar environments. This paper reports epidemiological data for Ex AS using a novel data collection system. PHC on Ex AS was delivered by trained and validated combat medical technicians (CMTs) using a set of Read-coded protocols. The CMTs were also directly supported and supervised by medical officers and nurses. A total of 3093 consultations were conducted over a 16-day period. Of these, 2707 (87.5%) consultations fell within the remit of the CMT protocols, with only 386 consultations (12.5%) being conducted exclusively by the medical officers or nurses. A Read-coded matrix built on CMT protocols is a simple and useful tool, particularly in civilian populations, for collecting morbidity data with the vast majority of conditions accounted for in the protocols. It is anticipated that such a system can better inform training, manning, medical material and pharmaceutical procurement than current category-based morbidity surveillance systems such as EPINATO (NATO epidemiological data). There is clear advantage to directly linking data capture to treatment algorithms. Accuracy, both in terms of numbers and condition, is likely improved. Data is also captured contemporaneously rather than after indeterminate time. Read coding has the added benefit of being an established electronic standard. In addition, the system would support traditional reporting methods such as EPINATO by providing increased assurance. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/

Assessment of computer codes for VVER-440/213-type nuclear power plants

Energy Technology Data Exchange (ETDEWEB)

Szabados, L.; Ezsol, Gy.; Perneczky [Atomic Energy Research Institute, Budapest (Hungary)

1995-09-01

Nuclear power plant of VVER-440/213 designed by the former USSR have a number of special features. As a consequence of these features the transient behaviour of such a reactor system should be different from the PWR system behaviour. To study the transient behaviour of the Hungarian Paks Nuclear Power Plant of VVER-440/213-type both analytical and experimental activities have been performed. The experimental basis of the research in the PMK-2 integral-type test facility , which is a scaled down model of the plant. Experiments performed on this facility have been used to assess thermal-hydraulic system codes. Four tests were selected for {open_quotes}Standard Problem Exercises{close_quotes} of the International Atomic Energy Agency. Results of the 4th Exercise, of high international interest, are presented in the paper, focusing on the essential findings of the assessment of computer codes.

A Comparison of Athletic Movement Among Talent-Identified Juniors From Different Football Codes in Australia: Implications for Talent Development.

Science.gov (United States)

Woods, Carl T; Keller, Brad S; McKeown, Ian; Robertson, Sam

2016-09-01

Woods, CT, Keller, BS, McKeown, I, and Robertson, S. A comparison of athletic movement among talent-identified juniors from different football codes in Australia: implications for talent development. J Strength Cond Res 30(9): 2440-2445, 2016-This study aimed to compare the athletic movement skill of talent-identified (TID) junior Australian Rules football (ARF) and soccer players. The athletic movement skill of 17 TID junior ARF players (17.5-18.3 years) was compared against 17 TID junior soccer players (17.9-18.7 years). Players in both groups were members of an elite junior talent development program within their respective football codes. All players performed an athletic movement assessment that included an overhead squat, double lunge, single-leg Romanian deadlift (both movements performed on right and left legs), a push-up, and a chin-up. Each movement was scored across 3 essential assessment criteria using a 3-point scale. The total score for each movement (maximum of 9) and the overall total score (maximum of 63) were used as the criterion variables for analysis. A multivariate analysis of variance tested the main effect of football code (2 levels) on the criterion variables, whereas a 1-way analysis of variance identified where differences occurred. A significant effect was noted, with the TID junior ARF players outscoring their soccer counterparts when performing the overhead squat and push-up. No other criterions significantly differed according to the main effect. Practitioners should be aware that specific sporting requirements may incur slight differences in athletic movement skill among TID juniors from different football codes. However, given the low athletic movement skill noted in both football codes, developmental coaches should address the underlying movement skill capabilities of juniors when prescribing physical training in both codes.

A Comparison of Load-Velocity and Load-Power Relationships Between Well-Trained Young and Middle-Aged Males During Three Popular Resistance Exercises.

Science.gov (United States)

Fernandes, John F T; Lamb, Kevin L; Twist, Craig

2018-05-01

Fernandes, JFT, Lamb, KL, and Twist, C. A comparison of load-velocity and load-power relationships between well-trained young and middle-aged males during 3 popular resistance exercises. J Strength Cond Res 32(5): 1440-1447, 2018-This study examined the load-velocity and load-power relationships among 20 young (age 21.0 ± 1.6 years) and 20 middle-aged (age 42.6 ± 6.7 years) resistance-trained males. Participants performed 3 repetitions of bench press, squat, and bent-over-row across a range of loads corresponding to 20-80% of 1 repetition maximum (1RM). Analysis revealed effects (p velocity for all 3 exercises, and interaction effects on power for squat and bent-over-row (p bench press and bent-over-row, the young group produced higher barbell velocities, with the magnitude of the differences decreasing as load increased (ES; effect size 0.0-1.7 and 1.0-2.0, respectively). Squat velocity was higher in the young group than the middle-aged group (ES 1.0-1.7) across all loads, as was power for each exercise (ES 1.0-2.3). For all 3 exercises, both velocity and 1RM were correlated with optimal power in the middle-aged group (r = 0.613-0.825, p velocities at low external loads and power outputs as high as the young males across a range of external resistances. Moreover, the strong correlations between 1RM and velocity with optimal power suggest that middle-aged males would benefit from training methods which maximize these adaptations.

COCOA Code for Creating Mock Observations of Star Cluster Models

OpenAIRE

Askar, Abbas; Giersz, Mirek; Pych, Wojciech; Dalessandro, Emanuele

2017-01-01

We introduce and present results from the COCOA (Cluster simulatiOn Comparison with ObservAtions) code that has been developed to create idealized mock photometric observations using results from numerical simulations of star cluster evolution. COCOA is able to present the output of realistic numerical simulations of star clusters carried out using Monte Carlo or \\textit{N}-body codes in a way that is useful for direct comparison with photometric observations. In this paper, we describe the C...

Data-acquisition system for the NLO error-propagation exercise

International Nuclear Information System (INIS)

Lower, C.W.; Gessiness, B.; Bieber, A.M. Jr.; Keisch, B.; Suda, S.C.

1983-01-01

An automated data-acquisition system using barcoded labels was developed for an error-propagation exercise to determine the limit of error for inventory differences (LEID) for a material balance area at NLO, Inc.'s Feed Materials Production Center, Fernald, Ohio. Each discrete item of material to be measured (weighed or analyzed) was labeled with a bar-coded identification number. Automated scale terminals, portable bar-code readers, and an automated laboratory data-entry terminal were used to read identification labels and automatically record measurement and transfer information. This system is the prototype for an entire material control and accountability system

Lessons learned from the quench-11 training exercise

International Nuclear Information System (INIS)

Hohorst, J.K.; Allison, C.M.

2007-01-01

16 organizations in 12 countries are participating in a RELAP/SCDAPSIM training exercise based on the Quench 11 experiment performed at Karlsruhe (Germany) in 2005. This exercise is being conducted in parallel to an International Standard Problem (ISP). Both the ISP and the RELAP/SCDAPSIM training exercise included a 'semi-blind' portion that was completed in the fall of 2006 and an 'open' portion that is to be completed in the summer of 2007. The RELAP/SCDAPSIM training exercise is coordinated by Innovative Systems Software with support by the International SCDAP Development and Training Program (SDTP). The Quench-11 experiment is based on an electrically heated fuel rod bundle representative of a PWR design. The bundle was subjected to a boil down transient, heat-up, and quenching with peak temperatures exceeding the melting point of the Zircaloy cladding. This experiment was chosen by the European Union as an International Benchmark exercise to compare the effectiveness of quenching models in the severe accident computer codes used today for accident analysis. This paper briefly describes (a) RELAP/SCDAPSIM/MOD3.4, (b) the Quench facility and experiments used in the training exercise, and (c) the training guidelines provided to the participants followed by a more detailed description of the lessons learned from the initial 'semi-blind' portion. The representative results demonstrate that good analysts can still have a difficult time predicting the thermal hydraulic response of a relative simple transient in a complex system

Comparison of codes and standards for radiographic inspection

International Nuclear Information System (INIS)

Bingoeldag, M. M.; Aksu, M.; Akguen, A. F.

1995-01-01

This report compares the procedurel requirements and acceptance criteria for radiographic inspections specified in the relevant national and international codes and standards. In particular, detailed analysis of inspection conditions such as exposure arrangements, and contrast requirements are given

OECD/NRC BWR Turbine Trip Benchmark: Simulation by POLCA-T Code

International Nuclear Information System (INIS)

Panayotov, Dobromir

2004-01-01

Westinghouse transient code POLCA-T brings together the system thermal-hydraulics plant models and three-dimensional (3-D) neutron kinetics core models. Participation in the OECD/NRC BWR Turbine Trip (TT) Benchmark is a part of our efforts toward the code's validation. The paper describes the objectives for TT analyses and gives a brief overview of the developed plant system input deck and 3-D core model.The results of exercise 1, system model without netronics, are presented. Sensitivity studies performed cover the maximal time step, turbine stop valve position and mass flow, feedwater temperature, and steam bypass mass flow. Results of exercise 2, 3-D core neutronic and thermal-hydraulic model with boundary conditions, are also presented. Sensitivity studies include the core inlet temperature, cladding properties, and direct heating to core coolant and bypass.The entire plant model was validated in the framework of the benchmark's phase 3. Sensitivity studies include the effect of SCRAM initialization and carry-under. The results obtained - transient fission power and its initial axial distribution and steam dome, core exit, lower and upper plenum, main steam line, and turbine inlet pressures - showed good agreement with measured data. Thus, the POLCA-T code capabilities for correct simulation of pressurizing transients with very fast power were proved

Video game-based exercise, Latino children's physical health, and academic achievement.

Science.gov (United States)

Gao, Zan; Hannan, Peter; Xiang, Ping; Stodden, David F; Valdez, Verónica E

2013-03-01

There is a paucity of research investigating the effects of innovative physical activity programs on physical health and academic performance in the Latino population. To examine the impact of Dance Dance Revolution [DDR]-based exercise on Latino children's physical fitness and academic achievement. A repeated-measures crossover design was used. In Year 1, Grade-4 students were assigned to the intervention group and offered 30 minutes of exercise (DDR, aerobic dance) three times per week. Grade-3 and Grade-5 students made up the comparison group and were offered no structured exercise at school. In Year 2, the Grade-4 students were again assigned to the intervention, whereas Grade-5 and Grade-6 students were in the comparison group. Assessments were conducted with 208 Latino school children. The baseline measures included time to complete a 1-mile run, BMI, and reading and math scores. Data were collected again 9 months later. Overall, data were collected in 2009-2011 and analyzed in 2012. Data yielded significant differences between the intervention and comparison groups in differences in 1-mile run and math scores in Year 1 and Year 2. The results also revealed net differences in the intervention versus comparison group scores on the 1-mile run for Grade 3 (p<0.01). Additionally, children's yearly pre-test and post-test BMI group changes differed (χ(2)((2)) = 6.6, p<0.05) only for the first year of intervention. The DDR-based exercise intervention improved children's cardiorespiratory endurance and math scores over time. Professionals should consider integrating exergaming at schools to achieve the goals of promoting a physically active lifestyle and enhancing academic success among Latino children. Copyright © 2013 American Journal of Preventive Medicine. Published by Elsevier Inc. All rights reserved.

Effect of Short-term Forced Exercise on Naloxone Induced Withdrawal Symptoms in Morphine Addicted Male Rats

Directory of Open Access Journals (Sweden)

KH Saadipour

2008-01-01

Full Text Available ABSTRACT: Introduction & Objective: Opioid dependence has been causing limitation in usage of morphine and other opioid drugs in pain control. The aim of this study was to assess the effect of short-term forced exercise on withdrawal syndrome in morphine addicted male rats. Materials & Methods: This experimental study was done in the physiology research center of Ahwas Jondishapour University of Medical Sciences. Twenty four young male Wistar rats, weighing 200-300gr, were randomly divided into four groups: no addiction and no exercise, no addiction and exercise, addiction and no exercise and addiction and exercise. The exercise groups underwent treadmill forced exercise for ten days. The first five days morphine was administrated (ip twice daily with increasing dose (5، 10، 20، 40, 50 mg/kg to addicted groups. Also single dose (50mg/kg of morphine was administrated to them on the 10th day of exercise. After administration of naloxone hydrochloride the withdrawal symptoms were evaluated for 5 minutes. The findings of this study were analyzed by SPSS software and One- way ANOVA (Tukey test. Results: The findings of this study showed that the withdrawal symptoms was elevated in exercise and addicted groups in comparison with control group (p<0.05 , p<0.01. However, most of withdrawal symptoms decreased in addicted and exercise group in comparison with addicted and no exercise group (p<0.01, p<0.001. Conclusion: The exercise could increase endogenous opioid and withdrawal symptoms in animals but reduce withdrawal symptoms in addicted and exercise groups compared to addicted and no exercise group. Its mechanism might be related to down regulation and low sensitivity of opioid receptors

Exercise interventions for smoking cessation.

Science.gov (United States)

Ussher, Michael H; Taylor, Adrian H; Faulkner, Guy E J

2014-08-29

-up and a benefit for exercise of borderline significance (p = 0.05) at the 12-month follow-up. Another study reported significantly higher abstinence rates at six month follow-up for a combined exercise and smoking cessation programme compared with brief smoking cessation advice. One study showed significantly higher abstinence rates for the exercise group versus a control group at the three-month follow-up but not at the end of treatment or 12-month follow-up. The other studies showed no significant effect for exercise on abstinence. Only two of the 20 trials offered evidence for exercise aiding smoking cessation in the long term. All the other trials were too small to reliably exclude an effect of intervention, or included an exercise intervention which may not have been sufficiently intense to achieve the desired level of exercise. Trials are needed with larger sample sizes, sufficiently intense interventions in terms of both exercise intensity and intensity of support being provided, equal contact control conditions, and measures of exercise adherence and change in physical activity in both exercise and comparison groups.

Preliminary report on SG126 Task 3: 129I interlaboratory comparison

International Nuclear Information System (INIS)

Roberts, M.L.; Caffee, M.W.; Proctor, I.D.

1996-01-01

An interlaboratory comparison exercise for 129 I has been organized and conducted. A total of seven laboratories participated in the exercise to either a full or limited extent. In the comparison, a suite of 11 samples was used. This suite of standards contained both synthetic 'standard type' materials (i.e., AgI) and environmental materials. The isotopic 129 I/ 127 I ratio of the samples varied from 10 -8 to 10 -14 . Results of the comparison are presented

Fuel modelling at extended burnup. Report of the co-ordinated research programme on fuel modelling at extended burnup - FUMEX 1993-1996

International Nuclear Information System (INIS)

1998-01-01

This report provides a description of the experiments chosen, an overview of the codes used by participants in the exercise, and the improvements implemented as a consequence of FUMEX. A commentary is given regarding the various aspects of fuel behavior tested and a detailed quantitative comparison is made between experimental data and code predictions. The report concludes with a discussion of the main findings of the exercise, the identified improvements and shortcomings in codes and modelling, and outstanding technical issues that require further attention

The EWGRD Round Robin Measurement Exercise

Science.gov (United States)

Thornton, D. A.; Wagemans, J.; Fernandes, A. C.; Girard, J. M.; Kis, D. P.; Klupák, V.; Mutnuru, R.; Philibert, H.; Rousseau, G.; Santos, J. P.; Serén, T.; Zsolnay, E. M.

2016-02-01

This paper presents the results of a round robin exercise carried out to compare specific activity measurements performed by eight European organisations on a set of ten neutron activation detectors containing the radio-nuclides 110mAg, 60Co, 54Mn, 46Sc and 94Nb. The purpose of the exercise was to demonstrate the level of consistency between the participating organisations in blind tests of measurements relevant to reactor metrology. The samples used were selected from a stock of pre-existing irradiated material held at SCK•CEN. Taking turns over a period of approximately 9 months, the participating organisations received the samples, measured them and provided their results to an independent referee who collated and compared the data. The inter-comparison has demonstrated good agreement between the participants with standard deviations for each dosimeter varying between 1.6% and 3.1%. The paper provides results of the EWGRD Round Robin in an anonymised form together with discussion and conclusions which may be drawn from the exercise.

Comparison of the THYC and FLICA-3M codes by the pseudo-cubic thin-plate method; Comparaison par la methode des plaques de predicteurs de flux critique obtenus a l`aide des codes THYC et FLICA-3

Energy Technology Data Exchange (ETDEWEB)

Banner, D; Crecy, F de

1993-06-01

The pseudo cubic Spline method (PCSM) is a statistical tool developed by the CEA. It is designed to analyse experimental points and in particular thermalhydraulic data. Predictors of the occurrence of critical heat flux are obtained by using Spline functions. In this paper, predictors have been computed from the same CHF databases by using two different flow analyses to derive local thermal-hydraulic variables at the CHF location. In fact, CEA`s FLICA-3M represents rod bundles by interconnected subchannels whereas EDF`s THYC code uses a porous 3D approach. In a first step, the PCSM is briefly presented as well as the two codes studied here. Then, the comparison methodology is explained in order to prove that advanced analysis of thermalhydraulic codes can be achieved with the PCSM. (authors). 6 figs., 2 tabs., 5 refs.

Intercomparison of codes for intermediate energy nuclear data: The first step

International Nuclear Information System (INIS)

Blann, M.; Gruppelaar, H.; Nagel, P.; Rodens, J.

1994-01-01

Several weak points of the intermediate energy nuclear data calculated in this exercise are described as introduction to some of the areas needing discussion at this meeting. These include nuclear structure effects on precompound spectra, large variations between codes in predicted total reaction cross sections, and in total neutron and proton multiplicities. INC codes don't reflect correct experimental Q values, and may have difficulties at very low angles due to overestimation of the quasi-elastic peak. We raise questions as to additional reaction properties (beyond n and p spectra) which may need benchmarking

Application of the three-dimensional Oak Ridge transport code

International Nuclear Information System (INIS)

Rhoades, W.A.; Childs, R.L.; Emmett, M.B.; Cramer, S.N.

1984-01-01

TORT, a 3-d extension of the DOT discrete ordinates transport code is now in production use for studies of radiation penetration into large concrete and masonry structures. This paper discusses certain features of the new code and shows representative results, including comparisons with Monte Carlo calculations

Comparison of spectra for validation of Penelope code for the energy range used in mammography; Comparacao de espectros para validacao do codigo PENELOPE para faixa de energia usada em mamografia

Energy Technology Data Exchange (ETDEWEB)

Albuquerque, M.A.G.; Ferreira, N.M.P.D., E-mail: malbuqueque@hotmail.co [Instituto Militar de Engenharia (IME), Rio de Janeiro, RJ (Brazil); Pires, E.; Ganizeu, M.D.; Almeida, C.E. de, E-mail: marianogd@uol.com.b [Universidade do Estado do Rio de Janeiro (UERJ), RJ (Brazil); Prizio, R.; Peixoto, J.G., E-mail: guilherm@ird.gov.b [Comissao Nacional de Energia Nuclear (CNEN), Rio de Janeiro, RJ (Brazil)

2009-07-01

The spectra simulated by the Penelope code were compared with the spectra experimentally obtained through the silicon PIN photodiode detector, and with spectra calculated by the code of IPEN, and the comparison exhibited a concordance of 93.3 %, and make them an option for study of X-ray spectroscopy in the voltage range used in mammography

Sensitivity Studies for Main Steam Line Break Exercises 2 and 3 with RELAP5/PANBOX

International Nuclear Information System (INIS)

Boeer, Rainer; Knoll, Alfred

2003-01-01

This paper presents and discusses results obtained with the nuclear plant safety analysis code system RELAP5/PANBOX (R/P/C) for the return-to-power scenario of exercises 2 and 3 of the Organization for Economic Cooperation and Development/Nuclear Energy Agency Main Steam Line Break (MSLB) Benchmark. Both the external and internal coupling options of R/P/C have been considered for exercise 3; i.e., the COBRA module of PANBOX was used to calculate the core thermal hydraulics in the external coupling option, whereas the core thermal hydraulics of RELAP5 was used in the internal coupling option. For the representation of thermal-hydraulic channels, a fine channel geometry based on the 177 fuel assemblies was selected for the external coupling option, and a coarse channel geometry based on 19 coarse channels has been investigated for the internal coupling option. The comparison of the results shows very good agreement of important core parameters between the considered coupling variants. Both exercises 2 and 3 have been investigated with respect to local safety parameters like fuel centerline temperatures and minimum departure from nucleate boiling ratios using the on-line hot subchannel analysis capability of R/P/C in the external coupling option. The results show that both quantities are far from the safety-related limits.The benchmark demonstrates, that R/P/C - as part of the integrated CASCADE-3D core analysis system of Framatome ANP GmbH - has proven to be a powerful tool for detailed analyses of an MSLB accident

[Effect of aerobic exercise and resistance exercise in improving non-alcoholic fatty liver disease: a randomized controlled trial].

Science.gov (United States)

Jia, G Y; Han, T; Gao, L; Wang, L; Wang, S C; Yang, L; Zhang, J; Guan, Y Y; Yan, N N; Yu, H Y; Xiao, H J; Di, F S

2018-01-20

Objective: To investigate the effect of dietary control combined with different exercise modes on plasma vaspin, irisin, and metabolic parameters in patients with non-alcoholic fatty liver disease (NAFLD) through a randomized open parallel-controlled study. Methods: The patients aged 30-65 years who visited Tianjin Third Central Hospital from January 2013 to December 2014 and were diagnosed with NAFLD by liver ultrasound and fat content determination were screening, and 474 patients were enrolled in this randomized controlled trial and divided into aerobic exercise group, resistance exercise group, and control group. All patients received dietary intervention. The three groups were compared in terms of biochemical parameters, fat content, NFS score, energy metabolic parameters, body composition index, and levels of vaspin and irisin at baseline and after 6 months of intervention. SPSS 19.0 was used for statistical analysis. The t -test, the Mann-Whitney U test, the chi-square test, and an analysis of variance were used for comparison between groups. The multiple imputation method was used for missing data, and the results were included in the intention-to-treat analysis. Results: There were no significant differences in age, sex, anthropometrical parameters, and biochemical parameters between the three groups at baseline. Compared with dietary control alone, aerobic exercise and resistance exercise helped to achieve significant reductions in waist circumference, diastolic pressure, percentage of body fat, volatile fatty acid, fasting blood glucose, homeostasis model assessment of insulin resistance, triglyceride, low-density lipoprotein cholesterol, free fatty acid, uric acid, alanine aminotransferase, and liver fat content after 6 months of intervention ( P aerobic exercise group had a significant increase in non-protein respiratory quotient and significant reductions in body mass index and aspartate aminotransferase after intervention, as well as a significant

Attention Filtering in the Design of Electronic Map Displays: A Comparison of Color-Coding, Intensity Coding, and Decluttering Techniques

National Research Council Canada - National Science Library

Yeh, Michelle; Wickens, Christopher D

2000-01-01

In a series of experiments, the use of color-coding, intensity coding, and decluttering were compared order to assess their potential benefits for accessing information from electronic map displays...

Comparison of electron beam computed tomography and exercise electrocardiography in detecting coronary artery disease in the elderly

International Nuclear Information System (INIS)

Inoue, Shinji; Mitsunami, Kenichi; Kinoshita, Masahiko

1998-01-01

Although exercise electrocardiography (ECG) is a useful noninvasive screening test for coronary artery disease (CAD), one prerequisite for ECG screening is that patient be able to exercise enough to evoke myocardial ischemia. Thus, exercise ECG may not be suitable for, some elderly people with CAD who cannot exercise enough. We compared electron beam Computed Tomography (EBCT) with exercise ECG for detecting CAD in 196 patients (mean age, 58.4±12.5 (standard deviation)) who had undergone coronary angiography. Using the angiographic findings as the ''gold standard'', we found that the sensitivity, specificity, positive predictive value, and negative predictive value were 88%, 77%, 89%, and 77%, respectively, for EBCT, and 66%, 72%, 83%, and 52%, respectively, for exercise ECG. Although the results were similar when the subjects were divided into different age groups, the negative predictive value for exercise ECG, among older patients was very low. These findings suggest that EBCT is superior to exercise ECG in detecting CAD in the elderly. (author)

Predictive Bias and Sensitivity in NRC Fuel Performance Codes

Energy Technology Data Exchange (ETDEWEB)