WorldWideScience

Sample records for cleaning agents

  1. Evaluation of different cleaning agents used for cleaning ultra tiltration membranes fouled by surface water

    OpenAIRE

    Zondervan, Edwin; Roffel, Brian

    2007-01-01

    This paper reviews the published literature on potential membrane fouling components, available cleaning agents and possible interactions between cleaning agents and fouling components. It also lists the cleaning models available in the literature, and evaluates the advantages and disadvantages of these models. Based on this outcome, a new cleaning model is proposed to capture cleaning dynamics for 10 different cleaning agents, varying from acidic, alkali and oxidizing to sequestering agents ...

  2. NON-SPECIFIC METHODS FOR DETECTING RESIDUES OF CLEANING AGENTS DURING CLEANING VALIDATION

    OpenAIRE

    DRAGAN M. MILENOVIĆ; DRAGAN S. PEŠIĆ; SNEŽANA S. MITIĆ

    2011-01-01

    Cleaning validation procedures are carried out in order to assure that residues of cleaning agents are within acceptable limits after the cleaning process. Cleaning agents often consist of a mixture of various surfactants which are in a highly diluted state after the water rinsing procedure has been completed. This makes it difficult to find appropriate analytical methods that are sensitive enough to detect the cleaning agents. In addition, it is advantageous for the analytical methods to be ...

  3. Evaluation of different cleaning agents used for cleaning ultra tiltration membranes fouled by surface water

    NARCIS (Netherlands)

    Zondervan, Edwin; Roffel, Brian

    2007-01-01

    This paper reviews the published literature on potential membrane fouling components, available cleaning agents and possible interactions between cleaning agents and fouling components. It also lists the cleaning models available in the literature, and evaluates the advantages and disadvantages of t

  4. Chemical cleaning agents and bonding to glass-fiber posts

    Directory of Open Access Journals (Sweden)

    Ana Paula Rodrigues Gonçalves

    2013-02-01

    Full Text Available The influence of chemical cleaning agents on the bond strength between resin cement and glass-fiber posts was investigated. The treatments included 10% hydrofluoric acid, 35% phosphoric acid, 50% hydrogen peroxide, acetone, dichloromethane, ethanol, isopropanol, and tetrahydrofuran. Flat glass-fiber epoxy substrates were exposed to the cleaners for 60 s. Resin cement cylinders were formed on the surfaces and tested in shear. All treatments provided increased bond strength compared to untreated control specimens. All failures were interfacial. Although all agents improved the bond strength, dichloromethane and isopropanol were particularly effective.

  5. Chemical cleaning agents and bonding to glass-fiber posts.

    Science.gov (United States)

    Gonçalves, Ana Paula Rodrigues; Ogliari, Aline de Oliveira; Jardim, Patrícia dos Santos; Moraes, Rafael Ratto de

    2013-01-01

    The influence of chemical cleaning agents on the bond strength between resin cement and glass-fiber posts was investigated. The treatments included 10% hydrofluoric acid, 35% phosphoric acid, 50% hydrogen peroxide, acetone, dichloromethane, ethanol, isopropanol, and tetrahydrofuran. Flat glass-fiber epoxy substrates were exposed to the cleaners for 60 s. Resin cement cylinders were formed on the surfaces and tested in shear. All treatments provided increased bond strength compared to untreated control specimens. All failures were interfacial. Although all agents improved the bond strength, dichloromethane and isopropanol were particularly effective.

  6. Methodology for estimating cleaning effectiveness and dispersion of oil with shoreline cleaning agents in the field

    Energy Technology Data Exchange (ETDEWEB)

    Clayton, J.R.Jr.; Stransky, B.C.; Adkins, A.C.; Lees, D.C. [Ogden Environmental and Energy Services Co., Oak Ridge, TN (United States); Michel, J. [Research Planning, Inc., Columbia, SC (United States); Schwartz, M.J.; Snyder, B.J. [Ogden Environmental and Energy Services Co., Oak Ridge, TN (United States); Reilly, T.J. [PCCI, Alexandria, VA (United States)

    1996-09-01

    A method to evaluate shoreline cleaning agents (SCA) using a portable field kit, was described. SCAs enhance removal of oil from shoreline surfaces, but their performance can be influenced by site-specific variables, and the physical and chemical properties of the oil. On-site testing could provide a quantitative and qualitative estimate of cleaning capability and dispersion of oil with SCAs. The method was tested on three substrates, namely gravel rip-rap, and eelgrass and two oils (Bunker C and Bonny Light), and two SCAs (Corexit 9580 and PES-51). Results showed that values for cleaning performance and oil dispersion were reproducible enough to allow differences to be identified in tests with and without SCAs and between SCAs. The method could help users in their decision making as to which SCA, if any, to use in the field. 25 refs., 5 tabs., 2 figs.

  7. Whole body cleaning agent containing N-acyltaurate

    Science.gov (United States)

    Lentsch, Steven E. (Inventor)

    1992-01-01

    The subject invention relates to a human cleansing agent particularly suitable for use in long duration spaceflight and to a method of bathing with the agent. The agent of the subject invention is in the form of a paste having a pH of 5.0 to 7.9 which comprises an acyltaurate, a skin conditioner, a hair conditioner, and a preservative. More specifically, it includes sodium N-coconut acid-N-methyl taurate, in combination with soybean lecithin, polyquaternium 16, and formalin. This particular combination satisfies the following objectives: (1) that it be usable with a minimum amount of water per shower (approximately 1 gallon); (2) that it be easily separated from the water for purposes of water reclamation; (3) that it be pH compatible with skin and hair; (4) that it rinse well in deionized water; (5) that it be mild to skin and eyes; (6) that it effectively clean both skin and hair; (7) that it be suitable for use in zero gravity; and (8) that it provide ease of combing of wet and dry hair. The method of the invention includes the steps of wetting the skin and hair with a small quantity of water, lathering the skin with the paste, rinsing the lather from the skin and hair with a small quantity of water to produce a rinse water containing the cleansing agent, defoaming the rinse water, and supplying the defoamed rinse water to a water reclamation unit for recycling the water. The novelty of the invention appears to lie in the particular formulation of the cleansing agent and its method of use which provide optimal results under the given constraints and objectives.

  8. Exposure of ventilation system cleaning workers to harmful microbiological agents

    Directory of Open Access Journals (Sweden)

    Małgorzata Gołofit-Szymczak

    2013-10-01

    Full Text Available Background: Regular inspection of the cleanliness of the ventilation systems, as well as their periodic cleaning and disinfection, if necessary, are the main factors of the proper maintenance of each system. Performing maintenance operations on the ventilation system, workers are exposed to risk associated with the exposure to harmful biological agents. The aim of this study was to assess the employees' exposure to bioaerosols during maintenance work on ventilation systems. Material and Methods: Bioaerosol measurements were carried out using a button sampler. The microbial particles were collected on gelatin filters. Settled-dust samples from the inner surface of the air ducts and filter-mat samples were selected for the microbiological analysis. In the collected air, dust and filter samples the concentration of bacteria and fungi were determined. Results: Bacteria and fungi concentrations ranged between 3.6×102-2.2×104 CFU/m3 and 4.7×102-4.5×103 CFU/m3 at workplaces where the operations connected with mechanical ventilation cleaning were performed and 2.2×104-1.2×105 CFU/m3 and 9.8×101-2.5×102 CFU/m3 at workplaces where filter exchange was performed, respectively. The qualitative analysis of microorganisms isolated from the air in all studied workplaces revealed that the most prevalent bacteria belonged to Bacillus genus. The average concentrations of bacteria and fungi in filter-mat samples were 3.3×103 CFU/cm2 and 1.4×104 CFU/cm2, respectively. In settled-dust samples, average concentrations were 591 CFU/100 cm2 and 52 CFU/100 cm2, for bacteria and fungi respectively. Conclusions: Workers cleaning ventilation systems are exposed to harmful biological agents classified into risk groups, 1 and 2, according to their level of the risk of infection. The research conducted in the workplace can be the basis of risk assessment related to exposure to harmful biological agents during maintenance work in ventilation. Med Pr 2013;64(5:613–623

  9. Quantitative Evaluation of Contamination on Dental Zirconia Ceramic by Silicone Disclosing Agents after Different Cleaning Procedures

    OpenAIRE

    Sebastian Wille; Vincent van Broeck; Thomas Strunskus; Franz Faupel; Matthias Kern

    2015-01-01

    The aim of this study was to evaluate the effectiveness of cleaning procedures for air-abraded zirconia after contamination with two silicone disclosing agents. Air-abraded zirconia ceramic specimens (IPS e.max ZirCAD) were contaminated with either GC Fit Checker white or GC Fit Checker II. Untreated zirconia specimens were used as control. Afterwards the surfaces were cleaned either with waterspray or ultrasonically in 99% isopropanol or using a newly developed cleaning paste (Ivoclean). Aft...

  10. Quantitative Evaluation of Contamination on Dental Zirconia Ceramic by Silicone Disclosing Agents after Different Cleaning Procedures

    Directory of Open Access Journals (Sweden)

    Sebastian Wille

    2015-05-01

    Full Text Available The aim of this study was to evaluate the effectiveness of cleaning procedures for air-abraded zirconia after contamination with two silicone disclosing agents. Air-abraded zirconia ceramic specimens (IPS e.max ZirCAD were contaminated with either GC Fit Checker white or GC Fit Checker II. Untreated zirconia specimens were used as control. Afterwards the surfaces were cleaned either with waterspray or ultrasonically in 99% isopropanol or using a newly developed cleaning paste (Ivoclean. After cleaning X-ray photoelectron spectroscopy (XPS was performed and the relative peak intensities of Zr, C and Si were used for a qualitative comparison of the residuals. There was no significant difference between the two different silicone disclosing agents. An additional cleaning step with isopropanol led to a significantly lower amount of residuals on the surface, but an additional cleaning process with Ivoclean did not reduce the amount of carbon residuals in comparison to the isopropanol cleaning. Just the silicone amount on the surface was reduced. None of the investigated cleaning processes removed all residuals from the contaminated surface. Standard cleaning processes do not remove all residuals of the silicone disclosing agent from the surface. This may lead to a failure of the resin-ceramic bonding.

  11. Critical cleaning agents for Di-2-ethylhexyl sebacate.

    Energy Technology Data Exchange (ETDEWEB)

    Hartley, Mya; Archuleta, Kim M.

    2013-08-01

    It is required that Di-2-ethylhexyl Sebacate oil, also commonly known as Dioctyl Sebacate oil, be thoroughly removed from certain metals, in this case stainless steel parts with narrow, enclosed spaces. Dioctyl Sebacate oil is a synthetic oil with a low compressibility. As such, it is ideally used for high pressure calibrations. The current method to remove the Dioctyl Sebacate from stainless steel parts with narrow, enclosed spaces is a labor-intensive, multi-step process, including a detergent clean, a deionized (DI) water rinse, and several solvent rinses, to achieve a nonvolatile residue of 0.04 mg per 50 mL rinse effluent. This study was undertaken to determine a superior detergent/solvent cleaning method for the oil to reduce cleaning time and/or the amount of detergent/solvent used. It was determined that while some detergent clean the oil off the metal better than the current procedure, using only solvents obtained the best result. In addition, it can be inferred, based on elevated temperature test results, that raising the temperature of the oil-contaminated stainless steel parts to approximately 50ÀC will provide for improved cleaning efficacy.

  12. SCIENTIFIC AND PRACTICAL ASPECTS OF WATER BASIN CLEANING FROM CHEMICAL WARFARE AGENTS

    OpenAIRE

    T. M. Tiavlovskaya; V. F. Tamelo

    2011-01-01

    The paper contains an analysis of reasons that explain pollution of World Ocean waters by chemical warfare agents and ecological dangers which can arise due to their emission. Possible methods for liquidation of chemical warfare agents and water basin cleaning from them have been considered in the paper.

  13. The efficacy of chemical agents in cleaning and disinfection programs

    Directory of Open Access Journals (Sweden)

    Silva Martins Alzira

    2001-09-01

    Full Text Available Abstract Background Due to the growing number of outbreaks of infection in hospital nurseries, it becomes essential to set up a sanitation program that indicates that the appropriate chemical agent was chosen for application in the most effective way. Method For the purpose of evaluating the efficacy of a chemical agent, the minimum inhibitory concentration (MIC was reached by the classic method of successive broth dilutions. The reference bacteria utilized were Bacillus subtilis var. globigii ATCC 9372, Bacillus stearothermophilus ATCC 7953, Escherichia coli ATCC 25922, Staphylococcus aureus ATCC 25923. The strains of Enterobacter cloacae IAL 1976 (Adolfo Lutz Institute, Serratia marcescens IAL 1478 and Acinetobactev calcoaceticus IAL 124 (ATCC 19606, were isolated from material collected from babies involved in outbreaks of infection in hospital nurseries. Results The MIC intervals, which reduced bacteria populations over 08 log10, were: 59 to 156 mg/L of quaternarium ammonium compounds (QACs; 63 to 10000 mg/L of chlorhexidine digluconate; 1375 to 3250 mg/L of glutaraldehyde; 39 to 246 mg/L of formaldehyde; 43750 to 87500 mg/L of isopropanol or ethanol; 1250 to 6250 mg/L of iodine in polyvinyl-pyrolidone complexes, 150 to 4491 mg/L of chlorine-releasing-agents (CRAs; 469 to 2500 mg/L of hydrogen peroxide; and, 2310 to 18500 mg/L of peracetic acid. Conclusions Chlorhexidine showed non inhibitory activity over germinating spores. A. calcoaceticus, was observed to show resistance to the majority of the agents tested, followed by E. cloacae and S. marcescens.

  14. Self-reported occupational skin contact with cleaning agents and the risk of disability pension

    DEFF Research Database (Denmark)

    Feveile, Helene; Christensen, Karl Bang; Flyvholm, Mari-Ann

    2009-01-01

    disability pension. METHODS: A sample of 8337 employees between 18 and 59 years of age participated in the Danish Work Environment Cohort Study in 1990, 1995, or 2000. They were followed up regarding disability pension until 2006 using the DREAM register on social transfer payments for all inhabitants in...... suggests a potential for prevention of work-related disabilities among job groups exposed to cleaning agents.......BACKGROUND: Occupational skin diseases often affect the hands and can lead to consequences at both the individual and the social level. OBJECTIVES: To investigate and quantify the association between self-reported occupational skin contact with cleaning agents and subsequent transition to...

  15. Determination of preservatives in cosmetics, cleaning agents and pharmaceuticals using fast liquid chromatography.

    Science.gov (United States)

    Baranowska, Irena; Wojciechowska, Iwona; Solarz, Natalia; Krutysza, Ewa

    2014-01-01

    This paper reports the development of a method for simultaneously determining five preservatives in cosmetics, cleaning agents and pharmaceuticals by fast liquid chromatography. Methylisothiazolinone, methylchloroisothiazolinone, benzyl alcohol, sodium benzoate and methylparaben were separated on a Chromolith Fast Gradient reversed-phase 18e column using gradient elution with acetonitrile and a 0.1% aqueous solution of formic acid, with a run time of 3 min. The preparation of solid and liquid samples included ultrasonic extraction with methanol with recoveries ranging from 69 to 119%. The developed method was used to analyze samples of cosmetics (66 samples), cleaning agents (five samples) and pharmaceutical industry products (17 samples).

  16. Ozone-initiated terpene reaction products in five European offices: Replacement of a floor cleaning agent

    NARCIS (Netherlands)

    Nørgaard, A.W.; Kofoed-Sørensen, V.; Mandin, C.; Ventura, G.; Mabilia, R.; Perreca, E.; Cattaneo, A.; Spinazzè, A.; Mihucz, V.G.; Szigeti, T.; De Kluizenaar, Y.; Cornelissen, H.J.M.; Trantallidi, M.; Carrer, P.; Sakellaris, I.; Bartzis, J.; Wolkoff, P.

    2014-01-01

    Cleaning agents often emit terpenes that react rapidly with ozone. These ozone-initiated reactions, which occur in the gas-phase and on surfaces, produce a host of gaseous and particulate oxygenated compounds with possible adverse health effects in the eyes and airways. Within the European Union (EU

  17. Effect of a novel chelating agent on defect removal during post-CMP cleaning

    Science.gov (United States)

    Hong, Jiao; Niu, Xinhuan; Liu, Yuling; He, Yangang; Zhang, Baoguo; Wang, Juan; Han, Liying; Yan, Chenqi; Zhang, Jin

    2016-08-01

    Chemical mechanical polishing (CMP) has become widely accepted for the planarization of device interconnect structures in deep submicron semiconductor manufacturing. However, during CMP process the foreign particles, metal contaminants, and other chemical components are introduced onto the wafer surface, so CMP process is considered as one of the dirtiest process to wafer surface defects which may damage the GLSI patterns and the metallic impurities can induce many crystal defects in wafers during the following furnace processing. Therefore, the post-CMP cleaning of wafers has become a key step in successful CMP process and the polyvinyl alcohol (PVA) brush cleaning is the most effective method for post-CMP in situ cleaning. In this study, the effect of the chelating agent with different concentrations on defect removal by using PVA brush cleaning was discussed emphatically. It can be seen from the surface images obtained by scanning electron microscopy and KLA digital comparison system analysis confirmed that the chelating agent can effectively act on the defect removal.

  18. Agent-Based Modleing of Power Plants Placement to Evaluate the Clean Energy Standard Goal

    Energy Technology Data Exchange (ETDEWEB)

    Omitaomu, Olufemi A [ORNL

    2014-01-01

    There is a political push for utilities to supply a specified share of their electricity sales from clean energy resources under the clean energy standard (CES). The goal is to achieve 80% clean energy by 2035. However, there are uncertainties about the ability of the utility industry to ramp up quickly even with the incentives that will be provided. Water availability from the streams is one of the major factors. The contiguous United States is divided into eighteen water regions, and multiple states share water from a single water region. Consequently, water usage decisions made in one state (located upstream of a water region that crosses multiple states) will greatly impact what is available downstream in another state. In this paper, an agent-based modeling approach is proposed to evaluate the clean energy standard goal for water-dependent energy resources. Specifically, using a water region rather than a state boundary as a bounding envelope for the modeling and starting at the headwaters, virtual power plants are placed based on the conditions that there is: (i) suitable land to site a particular power plant, (ii) enough water that meet regulatory guidelines within 20 miles of the suitable land, and (iii) a 20-mile buffer zone from an existing or a virtual power plant. The results obtained are discussed in the context of the proposed clean energy standard goal for states that overlap with one water region.

  19. Effects of cleaning agents on bond strength to dentin Efeitos de agentes de limpeza na resistência adesiva à dentina

    OpenAIRE

    Celso Rosin; Victor Elias Arana-Chavez; Narciso Garone Netto; Maria Aparecida Alves de Cerqueira Luz

    2005-01-01

    The cleaning of cavity walls aims to improve adhesive restorative procedures and longevity of restorations. This study has compared the effect of three cleaning agents - sodium bicarbonate jet (Profi II, Dabi Atlante, São Paulo, Brazil); pumice paste plus a biologic detergent (Tergestesim, Probem, São Paulo, Brazil); air water spray - on the bond strength between dentin and two different adhesive systems: Clearfil SE Bond (Kuraray, Kioto, Japan) and Scotchbond Multi-Purpose Plus (3M-ESPE, São...

  20. Synergetic effect of chelating agent and nonionic surfactant for benzotriazole removal on post Cu-CMP cleaning

    Science.gov (United States)

    Yanlei, Li; Yuling, Liu; Chenwei, Wang; Yue, Li

    2016-08-01

    The cleaning of copper interconnects after chemical mechanical planarization (CMP) process is a critical step in integrated circuits (ICs) fabrication. Benzotriazole (BTA), which is used as corrosion inhibitor in the copper CMP slurry, is the primary source for the formation of organic contaminants. The presence of BTA can degrade the electrical properties and reliability of ICs which needs to be removed by using an effective cleaning solution. In this paper, an alkaline cleaning solution was proposed. The alkaline cleaning solution studied in this work consists of a chelating agent and a nonionic surfactant. The removal of BTA was characterized by contact angle measurements and potentiodynamic polarization studies. The cleaning properties of the proposed cleaning solution on a 300 mm copper patterned wafer were also quantified, total defect counts after cleaning was studied, scanning electron microscopy (SEM) review was used to identify types of BTA to confirm the ability of cleaning solution for BTA removal. All the results reveal that the chelating agent can effectively remove the BTA residual, nonionic surfactant can further improve the performance. Project supported by the Natural Science Foundation of Hebei Province, China (No. F2015202267) and the Scientific Innovation Grant for Excellent Young Scientists of Hebei University of Technology (No. 2015007).

  1. 碱性清洗剂联合超声清洗机在妇科器械清洗中的应用%Application of alkaline cleaning agent combined with ultrasonic cleaning machine in cleaning equipment in gynecology

    Institute of Scientific and Technical Information of China (English)

    冉茂勤

    2015-01-01

    Objective:To explore the effect of alkaline cleaning agent combined with ultrasonic cleaning machine in cleaning equipment in gynecology.Methods:300 suction head and vaginal speculum were selected.They were randomly divided into A group,B group,C group.A group was given the medical soft brush washing and rinsing with water cannons,and then they were putted into the automatic cleaning machine.B group was soaked for 10 minutes with pH neutral potent multi enzyme cleaning agent,and then washed with A method.C group was shaked for 10 minutes in the ultrasonic vibration machine with alkaline cleaning agent,and then washed with A method.We compared the cleaning effect.Results:After cleaning,the qualified rate of A group was 58%;the qualified rate of B group was 90%;the qualified rate of C group was 100%.Conclusion:Cleaning effect was the best of ultrasound machine vibration plus alkaline cleaning agent plus high-pressure water washing brush.%目的:探讨碱性清洗剂联合超声清洗机清洗妇科复用器械的效果。方法:选择吸引头、窥阴器共300个,随机分成A、B、C 3个组,A组用医用软毛刷刷洗后用高压水枪冲洗,然后放入全自动清洗机清洗;B组用pH值中性的强效多酶清洗剂浸泡10 min后再用A组方法清洗;C组放入已加碱性清洗剂的超声机震动10 min再用A组方法清洗,比较清洗效果。结果:清洗后,A组合格率58%,B组合格率90%,C组合格率100%。结论:采用超声机震动+碱性清洗剂+毛刷+高压水枪冲洗,其清洗消毒效果最佳。

  2. Development of test protocols for effectiveness testing and working mechanisms for shoreline cleaning agents

    Energy Technology Data Exchange (ETDEWEB)

    Ramstad, S.; Hansen, B.H.; Daling, P.; Frenzel, M.; Oksenvag, J.H.C. [SINTEF Marine Environmental Technology, Trondheim (Norway); Merlin, F. [Cedre, Brest Cedex (France)

    2009-07-01

    One major spill and smaller accidental spills have occurred off the Norwegian Coast since the petroleum industry began operation in the area over 50 years ago. To date, no oil from these offshore spills has reached the coastal area, but with the expansion of the oil industry on the Norwegian continental shelf, there is a need for an effective shoreline cleanup response contingency. In general, shoreline cleanup operations are performed over a very long time period with rather low efficacy and generation of large quantities of waste materials. For these reasons, there is a need to develop and implement new and more cost-effective shore line protection, cleanup techniques and strategies. The primary purpose of this work was to develop test protocols for effectiveness quantification of shoreline cleaning agents (SCAs) to better understand their working mechanisms and effectiveness in treating oil-contaminated shorelines. A stepwise test regime was recommended to the Norwegian Climate and Pollution Agency. The test regime considers product ecotoxicology along with dispersibility and effectiveness. Its aim is to contribute to a better understanding for tactical use of these products in different spill scenarios. The paper reviewed non-mechanical in-situ shoreline cleanup techniques; shoreline washing and dispersing agents; bioremediation agents; ecotoxicity testing; dispersibility testing of SCAs; Warren Spring Laboratory (WSL) test of shoreline dispersants; wash-out effectiveness testing of shoreline dispersants on oil-contaminated bedrock using the simulated shoreline system (SSS); wave energy; oil type and soak time; and exposure period. Guidelines for the effective use of the proposed products were recommended based on data from these studies. 9 refs., 13 figs.

  3. Thumbnail Sketches: EDTA-Type Chelating Agents in Everyday Consumer Products: Some Food, Cleaning, and Photographic Applications.

    Science.gov (United States)

    Hart, J. Roger

    1985-01-01

    Discusses the role of chelating agents in (1) mayonnaise and salad dressings; (2) canned legumes; (3) plant foods; (4) liquid dishwashing detergents; (5) toilet soaps; (6) floor wax removers; (7) hard surface cleaners; (8) carpet cleaning; (9) bathtub and tile cleaners; and (10) photography. (JN)

  4. Evaluation studies of cleaning methods for artworks: from chelating agents on inorganic substrates to Dry cleaning treatments on contemporary surfaces

    OpenAIRE

    Selva Bonino, Valentina Emanuela

    2015-01-01

    Il progetto di tesi presenta due studi riguardanti, un intervento di pulitura, cosiddetto tradizionale su supporti inorganici e dipinti murali e una nuova applicazione di metodi a secco per il trattamento di pulitura di superficie (Dry cleaning). In particolare, il primo riguarda l'applicazione di soluzioni di agenti chelanti, in particolare il sale trisodico diidrato dell'acido etilendiamminotetraacetico e il sale tribasico diidrato del citrato di sodio, su substrati inorganici, cioè carb...

  5. The importance of chemical components in cleaning agents for the indoor environment

    DEFF Research Database (Denmark)

    Vejrup, Karl Ventzel

    VOCs. In one experiment, the concentration of nonpolar VOCs in the breathing zone of a person who treated the floor in a large climate chamber (45 m3) using a water based polish product was found to be 3,9 mg/m3. Use of scented cleaning agents usually means that odour thresholds of some compounds...... with polish treatment of the floor in a large climate chamber (45 m3) concentrations of up to 20 mg/m3 og 2-(2-ethoxyethoxy)ethanol were measured after 2 hours and it took more than 10 hours before the concentration was below the odour threshold (4 mg/m3).The amount of non-volatile compounds introduced......, an increase of the content of LAS in the dust was found after floor wash compared to the contents before floor wash. However, the most important source of LAS in the indoor environment is residues of detergent in clothes, thus a newly washed shirt contained 2960 ppm LAS. Other circumstances like transport...

  6. 滤料清洗剂的研制与应用%Development and application of the filter cleaning agent

    Institute of Scientific and Technical Information of China (English)

    朱成华; 侍路勇; 王富来; 孙文山; 杨立

    2012-01-01

    The filter of oilfield waste water filtration systems mainly adsorbs the surface contaminants from the oil, suspended impurities, bacteria and their products, ferrous sulfide,iron oxide, scale, and EOR polymer and other chemical agents,it's difficult to do filter cleaning with low temperature,the former cleaning agent degreasing rate is too low to meet the needs of on-site production. For cleaning filter of oilfield waste water filtering system, based on surface active agent cleaning principle, developed through experiments and screening, filter cleaning agent formulations, with a low temperature, low foaming, efficient degreasing,good matching, economic, environment protection and so on. The de-greasing rate is greater than 95%,entirely suitable for on- site operation requirements.%油田污水过滤系统的滤料表面主要吸附的污物有油污、悬浮杂质、细菌及其产物、硫化亚铁、氧化铁、水垢及三次采油用聚合物等,滤料清洗温度低、难度大,以往的清洗剂除油率低,难以满足生产现场需要.针对油田污水过滤系统中滤料的清洗,依据表面活性剂清洗原理,通过实验与筛选,研制出的滤料清洗剂配方,具有低温低泡沫、高效除油、良好的配套性、经济环保等特点,除油率大于95%,经油田现场应用完全符合生产要求.

  7. Study on the recovery process of hydrocarbon cleaning agent%碳氢清洗剂再生利用工艺方法的研究

    Institute of Scientific and Technical Information of China (English)

    刘瑞广

    2011-01-01

    ODS(Ozone Depleting Substances) cleaning agent takes a large portion in halogenated cleaning agent, which is the most common cleaning agent. The use of halogenated cleaning agent has threatened human, object to be cleaned and the environment. As a substitute of halogenated cleaning agent, hydrocarbon cleaning agent has been widely used in the recent years. Compared with halogenated cleaning agent, hydrocarbon cleaning agent has higher boiling point 150-190 ℃ and lower flashing point 50~70 ℃, which means the traditional cleaning agent recovery process are not suitable to recover hydrocarbon cleaning agent. This paper describes a new method to recover hydrocarbon cleaning a-gent. The recovery process is sulfuric acid extraction, clarification and distillation. Thus, the final product is qualified to be reused, and the sulfuric acid can also be reused.%在工业清洗领域使用最多的卤代烃清洗剂,其中ODS(破坏臭氧层物质)清洗剂占有很大比重,但在使用中对人、被清洗物和环境会带来许多危害.为此,各种替代产品和替代技术应运而生.从经济、适用、安全、环保等方面综合评价,经过多年的探索、论证、比较和筛选,碳氢清洗剂作为替代品已得到广泛应用,尽管碳氢清洗剂有诸多优点,但与ODS清洗剂相比,其沸点高(150~190℃)、闪点低(50~70℃)、与被清洗的物质相容性好,使碳氢清洗剂的再生无法用原有工艺方法实现.本工艺方法的研究是采取硫酸萃取、静置分离、精馏的方法再生碳氢清洗剂,达到原有的品质重复利用,硫酸萃取剂蒸馏回收重复利用,达到资源化利用的目的.

  8. Cleaning time and fate of phosphoric acid as conditioning agent on human dental enamel and dentin

    International Nuclear Information System (INIS)

    In this study the cleaning time and fate of phosphoric acid on human dental enamel and dentin have been investigated, using the radioactive tracer technique with 32P as an indicator of phosphorus. Twenty seconds were found to be sufficient for cleaning the enamel from phosphoric acid used for conditioning, and from formulations produced from its interaction with enamel. It was also found that dentin protection is necessary before conditioning with phosphoric acid due to the retention penetration of the latter through subsurface dentinal tubules. In addition, there seems to be an interaction between phosphoric acid and Ca(OH)2 leading to the formation of a sparingly soluble compound. (author)

  9. Application of method of organizational congruences to substitution of organic solvents with vegetable agents for cleaning offset printing machine

    Energy Technology Data Exchange (ETDEWEB)

    Salerno, S. [ENEA, Casaccia (Italy). Area Energia Ambiente e Salute; Tartaglia, R. [Unita Sanitaria Locale 10/D, Firenze (Italy); Garzi, S.; Biagioni, A. [Istituto tecnico Leonardo da Vinci, Firenze (Italy)

    1995-06-01

    The aim of this research is the application of the method of organizational congruences before and after the substitution of organic solvents with vegetable agents for the cleaning offset printing machine in order to assess the organizational changes. A solvent free process is the goal of the SUBSPRINT project (Technology Transfer Program of the European Community). In this study it is shown how human and environmental health is improved by using vegetable agents through this change may lead to some other organizational constraints such as the time needed, the monotony and repetitiveness of the technical actions involved. The authors underline that the knowledge of the new technology impact of health help for a better understanding of the resistance to the change and help for a further amelioration of it.

  10. Biofilm Matrix Composition Affects the Susceptibility of Food Associated Staphylococci to Cleaning and Disinfection Agents

    Science.gov (United States)

    Fagerlund, Annette; Langsrud, Solveig; Heir, Even; Mikkelsen, Maria I.; Møretrø, Trond

    2016-01-01

    Staphylococci are frequently isolated from food processing environments, and it has been speculated whether survival after cleaning and disinfection with benzalkonium chloride (BC)-containing disinfectants is due to biofilm formation, matrix composition, or BC efflux mechanisms. Out of 35 food associated staphylococci, eight produced biofilm in a microtiter plate assay and were identified as Staphylococcus capitis (2), S. cohnii, S. epidermidis, S. lentus (2), and S. saprophyticus (2). The eight biofilm producing strains were characterized using whole genome sequencing. Three of these strains contained the ica operon responsible for production of a polysaccharide matrix, and formed a biofilm which was detached upon exposure to the polysaccharide degrading enzyme Dispersin B, but not Proteinase K or trypsin. These strains were more tolerant to the lethal effect of BC both in suspension and biofilm than the remaining five biofilm producing strains. The five BC susceptible strains were characterized by lack of the ica operon, and their biofilms were detached by Proteinase K or trypsin, but not Dispersin B, indicating that proteins were major structural components of their biofilm matrix. Several novel cell wall anchored repeat domain proteins with domain structures similar to that of MSCRAMM adhesins were identified in the genomes of these strains, potentially representing novel mechanisms of ica-independent biofilm accumulation. Biofilms from all strains showed similar levels of detachment after exposure to alkaline chlorine, which is used for cleaning in the food industry. Strains with qac genes encoding BC efflux pumps could grow at higher concentrations of BC than strains without these genes, but no differences were observed at biocidal concentrations. In conclusion, the biofilm matrix of food associated staphylococci varies with respect to protein or polysaccharide nature, and this may affect the sensitivity toward a commonly used disinfectant. PMID:27375578

  11. Biofilm matrix composition affects the susceptibility of food associated staphylococci to cleaning and disinfection agents

    Directory of Open Access Journals (Sweden)

    Annette eFagerlund

    2016-06-01

    Full Text Available Staphylococci are frequently isolated from food processing environments, and it has been speculated whether survival after cleaning and disinfection with benzalkonium chloride-containing disinfectants is due to biofilm formation, matrix composition or benzalkonium chloride efflux mechanisms. Out of 35 food associated staphylococci, eight produced biofilm in a microtiter plate assay and were identified as Staphylococcus capitis (2, S. cohnii, S. epidermidis, S. lentus (2, and S. saprophyticus (2. The eight biofilm producing strains were characterized using whole genome sequencing. Three of these strains contained the ica operon responsible for production of a polysaccharide matrix, and formed a biofilm which was detached upon exposure to the polysaccharide degrading enzyme Dispersin B, but not Proteinase K or trypsin. These strains were more tolerant to the lethal effect of benzalkonium chloride both in suspension and biofilm than the remaining five biofilm producing strains. The five benzalkonium chloride susceptible strains were characterized by lack of the ica operon, and their biofilms were detached by Proteinase K or trypsin, but not Dispersin B, indicating that proteins were major structural components of their biofilm matrix. Several novel cell wall anchored repeat domain proteins with domain structures similar to that of MSCRAMM adhesins were identified in the genomes of these strains, potentially representing novel mechanisms of ica-independent biofilm accumulation. Biofilms from all strains showed similar levels of detachment after exposure to alkaline chlorine, which is used for cleaning in the food industry. Strains with qac genes encoding benzalkonium chloride efflux pumps could grow at higher concentrations of benzalkonium chloride than strains without these genes, but no differences were observed at biocidal concentrations. In conclusion, the biofilm matrix of food associated staphylococci varies with respect to protein or

  12. Biofilm Matrix Composition Affects the Susceptibility of Food Associated Staphylococci to Cleaning and Disinfection Agents.

    Science.gov (United States)

    Fagerlund, Annette; Langsrud, Solveig; Heir, Even; Mikkelsen, Maria I; Møretrø, Trond

    2016-01-01

    Staphylococci are frequently isolated from food processing environments, and it has been speculated whether survival after cleaning and disinfection with benzalkonium chloride (BC)-containing disinfectants is due to biofilm formation, matrix composition, or BC efflux mechanisms. Out of 35 food associated staphylococci, eight produced biofilm in a microtiter plate assay and were identified as Staphylococcus capitis (2), S. cohnii, S. epidermidis, S. lentus (2), and S. saprophyticus (2). The eight biofilm producing strains were characterized using whole genome sequencing. Three of these strains contained the ica operon responsible for production of a polysaccharide matrix, and formed a biofilm which was detached upon exposure to the polysaccharide degrading enzyme Dispersin B, but not Proteinase K or trypsin. These strains were more tolerant to the lethal effect of BC both in suspension and biofilm than the remaining five biofilm producing strains. The five BC susceptible strains were characterized by lack of the ica operon, and their biofilms were detached by Proteinase K or trypsin, but not Dispersin B, indicating that proteins were major structural components of their biofilm matrix. Several novel cell wall anchored repeat domain proteins with domain structures similar to that of MSCRAMM adhesins were identified in the genomes of these strains, potentially representing novel mechanisms of ica-independent biofilm accumulation. Biofilms from all strains showed similar levels of detachment after exposure to alkaline chlorine, which is used for cleaning in the food industry. Strains with qac genes encoding BC efflux pumps could grow at higher concentrations of BC than strains without these genes, but no differences were observed at biocidal concentrations. In conclusion, the biofilm matrix of food associated staphylococci varies with respect to protein or polysaccharide nature, and this may affect the sensitivity toward a commonly used disinfectant. PMID:27375578

  13. Effects of cleaning agents on bond strength to dentin Efeitos de agentes de limpeza na resistência adesiva à dentina

    Directory of Open Access Journals (Sweden)

    Celso Rosin

    2005-06-01

    Full Text Available The cleaning of cavity walls aims to improve adhesive restorative procedures and longevity of restorations. This study has compared the effect of three cleaning agents - sodium bicarbonate jet (Profi II, Dabi Atlante, São Paulo, Brazil; pumice paste plus a biologic detergent (Tergestesim, Probem, São Paulo, Brazil; air water spray - on the bond strength between dentin and two different adhesive systems: Clearfil SE Bond (Kuraray, Kioto, Japan and Scotchbond Multi-Purpose Plus (3M-ESPE, São Paulo, Brazil. Six groups (n:10 of dental fragments obtained from young adult extracted teeth were prepared, and each one received one of the listed surface cleaning techniques. After the adhesive application, a cone-shaped test body was built with AP-X (Kuraray, Kioto, Japan or Z100 (3M-ESPE, São Paulo, Brazil composite resins, using a Teflon matrix. The specimens were tested for tensile bond strength after one-week storage in distilled water at 37°C. Two pairs of fractured specimens of each group were randomly chosen and processed for scanning electron microscopy (SEM analysis. ANOVA test of the bond strength values showed no statistical differences among the cleaning agents and neither between their interactions with the bonding systems. Upon SEM analysis, most surfaces showed mixed fractures of adhesive and cohesive failures in bonding resin to dentin. Based on statistical and SEM analysis, it was concluded that the cleaning agents studied did not interfere with the bond strength of the adhesive systems used to dentin.A limpeza das paredes cavitárias é um passo importante na clínica odontológica e visa otimizar os procedimentos adesivos e a longevidade das restaurações. O presente estudo comparou o efeito de três agentes de limpeza cavitária - jato abrasivo de bicarbonato de sódio/ar/água (Profi II, Dabi Atlante, São Paulo, Brasil; pasta de pedra-pomes e água, somada a um detergente biológico (Tergestesim, Probem, São Paulo, Brasil; e

  14. Effects of cleaning agents in reducing microbial load on meat display tables at the Bodija municipal abattoir, Ibadan, Nigeria

    Directory of Open Access Journals (Sweden)

    A. E. J. Awosanya,

    2011-06-01

    Full Text Available Meat display tables have been implicated as one of the sources of meat contamination and a critical control point in food processing. Cleaning and disinfection operations are of great importance within the food processing industries for food safety reasons. The effectiveness of four cleaning agents as treatments for the reduction of microbial contamination of meat display tables used by meat sellers at the Bodija municipal abattoir in Ibadan, Oyo state, Nigeria was assessed within April and October, 2009. The treatments include the use of: 1. Pipe-borne water (27oC; 2. Hot water at 85oC; 3. Pipe-borne water and detergent; 4. Combination of pipe-borne water, detergent and sodium hypochlorite. Swab samples were taken from a 1cm2 area on each wooden table surfaces before and after application of each treatment. They were processed and grown on nutrient agar and MacConkey agar to determine the effects of each treatment on total aerobic and coliform counts in the laboratory. The results revealed that all the four treatments had statistically significant difference (P<0.05 in reducing microbial contamination with treatment 4– combination of pipe-borne water, detergent and sodium hypochlorite having the highest percent reduction in total aerobic and coliform counts (63% and 75% respectively. It is recommended that treatments 3 and 4 should be incorporated into the routine activities of meat sellers before the commencement of daily sales and after, because of their greater effect in reducing coliform than treatments 1 and 2, in order to minimize contamination of meat arising from meat display tables.

  15. 一种太阳能硅片清洗剂的制备方法%A preparation method of the solar silicon wafer cleaning agent

    Institute of Scientific and Technical Information of China (English)

    王亚妮; 刘军; 李峰; 许军训

    2012-01-01

    A water-based cleaning agent is prepared for commercial production of solar silicon wafer, it is applied to clean the surface of a solar silicon wafer. The cleaning agent is made up of non-ionic surfactant and an-ionic surfactant. Its solution is alkaline, it doesn't contain organic solvents, no irritating odour, cheaper and good performance of cleaning. The cleaning method is easy and non-toxic on humanbeings and the environment.%研制一种用于工业生产中太阳能硅片的水基专用清洗剂,适用于硅片的表面清洗处理.该清洗剂以非离子表面活性剂和阴离子表面活性剂为主剂,溶液呈碱性,不含有机溶剂,无刺激性气味、成本低、具有良好的去污、清洗性能.清洗方法操作方便、无毒、对人体无危害、对环境无污染.

  16. Is your cleanroom clean? An in-depth look at cleaning and disinfecting agents, procedures, and requirements for the compounding pharmacist.

    Science.gov (United States)

    Jeffrey, Megan

    2006-01-01

    A system for fulfilling the objectives of cleaning/disinfecting and controlling the environment of a cleanroom must be established. Some of the organizations that have established standards in designing a system include the International Organization for Standardization, the United States Pharmacopeia, and the US Environmental Protection Agency. To design a system specifically for your pharmacy, you must conduct the initial assessment of your pharmacy's specific environment, the categories of surface chemical treatments, steps on selecting the proper chemical treatments, cleaning/disinfecting and control techniques; and verification testing.

  17. 第3代脱模剂和清洗剂及其应用%Third Generation Release and Cleaning Agents and Their Application

    Institute of Scientific and Technical Information of China (English)

    吴耀祖; 黄炳荣; 景宗梁

    2011-01-01

    针对硅油脱模剂含有卤代烃、正已烷等有害化学物质,危害身体健康,具有安全隐患的缺陷,研制出高分子醇基第3代脱模剂,以及相配套的水基型蜡模清洗剂,具有良好的脱模和清洗效果,以及环境保护效果,且大幅降低生产成本,有利于维护工人身体健康.%For silicon oil release agent contains halogenated hydrocarbon, chlorobenzene and other harmful chemicals which hazard human health, the third generation high polymer alcohol based release agents and a complete set of anionic surface activity cleaning agent were developed for wax model and pattern cleaning. They possess fine effects on releasing and cleaning the wax pattern, and vindicating human health and environmental protection, greatly reducing the production cost.

  18. 高效路面油污清洗剂的研制%Development of road grease cleaning agent with high decontamination efficiency

    Institute of Scientific and Technical Information of China (English)

    王文; 蔡卫权; 李玉军; 涂文辉

    2013-01-01

    A new weakly alkaline road grease cleaning agent with high decontamination efficiency was developed by choosing appropriate surfactants, auxiliary solvent and alkaline auxiliaries via analysis of the composition, properties and forming process of the road surface grease. Based on orthogonal experiment, the best ingredients and their percentage contents of AES 6%, LAS 1%, APG 4%, AEO-9 1%, mandarin oil 1.5%, triethanolamine 4% and trisodium citrate 3% were determined b further experiments of performance optimization, and its decontamination rate could reach 99.8% at dry temperature of 150℃. Comparison study of the cleaning performance between commercial multipurpose cleaning agent "Mr Muscle" for kitchen and the as-prepared road grease cleaning agent showed that the latter cleaning agent had higher comprehensive decontamination capacity, and also broad application prospect in the field of thick road grease cleaning.%通过对美食街路面油污组成、性质及形成过程进行分析,选择合适的表面活性剂、辅助溶剂和碱性助剂等原料成功地复配成弱碱性高效路面油污清洗剂.在正交实验的基础上,对所选配方进行性能优化实验,确定最佳实验配方组成分别为脂肪醇聚氧乙烯醚硫酸钠6%、直链烷基苯磺酸钠1%、烷基糖苷4%、脂肪醇聚氧乙烯醚1%、桔子油1.5%、三乙醇胺4%和柠檬酸三钠3%,在150℃的干燥温度下其去污力可达99.8%.与市售厨房多用清洗剂“威猛先生”清洗性能的对比研究表明,该清洗剂的综合去污能力更强,在路面稠油垢清洗领域显示出广阔的应用前景.

  19. Research and application of domestic environmental protection cleaning agent%家用环保型水垢水锈清洗剂的研究与应用

    Institute of Scientific and Technical Information of China (English)

    李平; 田红丽

    2012-01-01

    The domestic cleaning agent which is mainly manufactured from food acid through Large amount of experiments was screened out. Finally, the optimum conditions of formula with tri-sodium citrate acetic acid active agent and EDTA. With the practical application, the resulLts showed that this cleaning agent has a good removal ability of scale and furring.%以食品酸为主剂开发了水垢水锈清洗剂,通过大量实验和优化组合,筛选出适合家庭使用的环保型水垢水锈清洗剂,并最终确定了清洗剂的配方为柠檬酸三钠、冰乙酸、活性剂和EDTA,通过实际应用,发现该清洗剂对水垢和水锈都用良好的去除能力。

  20. Optimization of Biodegradability and Toxicity Testing of Degradation Product from Linear Alkyl BenzeneSulfonate (LAS Surfactant as Cleaning Detergent Agent

    Directory of Open Access Journals (Sweden)

    Neera Khairani

    2009-11-01

    Full Text Available Optimization of Biodegradability and Toxicity Testing of Degradation Product from Linear Alkyl BenzeneSulfonate (LAS Surfactant as Cleaning Detergent Agent. Linear Alkyl Benzene Sulfonate (LAS is a surfactantused in laundry detergent as cleaning agent and toxic to aquatic organisms. Results shows, with the LAS concentrationused (20 ppm in medium, adaptation time and Acinetobacter sp. growth has shown better biodegradation ability thanthree other bacteria used Pseudomonas putida, Pseudomonas fluorescence, Bacillaria spp. Thus, Acinetobacter sp isused further for biodegradation process of LAS. Based on its biodegradation half-life using Acinetobacter sp, and withmixed culture (± 52.32% and ± 46.82% respectively could be achieved in 4 (four days, LAS could be categorized as abiodegradable compound. The toxicity assay is based on tetrazolium dye reduction with Rhizobium meliloti as indicatororganism. LAS is more toxic than its intermediate product from biodegradation, with IC50 = 34.35 ppm, and theintermediate product, Ac and Cm, has IC50 = 446.19 ppm and 111.28 ppm respectively. Identification of intermediateproducts using IR and LC-MS analysis shows that the degradation product contains chemicals compounds withfunctional group as follows: benzene, benzoic acid, hydroxyl, and aliphatic carbons with large molecule weight. Untilits half-time degradation time, LAS biodegradation process only occurs at the aliphatic carbon chain, and have not yetreached the stage of aromatic ring opening.

  1. Formula design of liquid-base hard oil dirt cleaning agent for smoke extractor%新型杀菌剂——己脒定二羟乙基磺酸盐的特性及其应用

    Institute of Scientific and Technical Information of China (English)

    苏强; 郭建维; 郑生华

    2011-01-01

    This paper analyzed the cleaning mechanism of liquid-based heavy oil soil cleaning agent. Orthogonal experiments were designed for formula development according to three cleaning methods and results were compared through cleaning efficiency test. Based on the data of orthogonal experiments, further discussion was made on how to raise cleaning efficiency. As a result, an optimized formula with lower cost was archived which showed better cleaning efficiency than other commercial products. Its detergency came to 99.8% after ten mins cleaning, and the flowing down of cleaning agent form dirt surface was delayed. The product has little fog when it is sprayed. It is good for use, harmless to human body and environmental friendly.%介绍了一种新型杀菌剂己脒定二羟乙基磺酸盐的特性及应用,已脒定二羟乙基磺酸盐的高效杀菌性、无刺激性和高安全性使其在化妆品中显示独特的功效,尤其在去屑、祛痘和抗异味等产品中有其独特优势,具有广泛的应用前景。

  2. Improved eradication of Clostridium difficile spores from toilets of hospitalized patients using an accelerated hydrogen peroxide as the cleaning agent

    Directory of Open Access Journals (Sweden)

    Dueck Christine

    2010-09-01

    Full Text Available Abstract Background C. difficle spores in the environment of patients with C. difficile associated disease (CDAD are difficult to eliminate. Bleach (5000 ppm has been advocated as an effective disinfectant for the environmental surfaces of patients with CDAD. Few alternatives to bleach for non-outbreak conditions have been evaluated in controlled healthcare studies. Methods This study was a prospective clinical comparison during non-outbreak conditions of the efficacy of an accelerated hydrogen peroxide cleaner (0.5% AHP to the currently used stabilized hydrogen peroxide cleaner (0.05% SHP at manufacturer recommended use-dilution with respect to spore removal from toilets in a tertiary care facility. The toilets used by patients who had diarrhea with and without C. difficile associated disease (CDAD were cultured for C. difficile and were monitored using an ultraviolet mark (UVM to assess cleaning compliance on a daily basis 5 days per week. A total of 243 patients and 714 samples were analysed. The culture results were included in the analysis only if the UVM audit from the same day confirmed that the toilet had been cleaned. Results Our data demonstrated that the efficacy of spore killing is formulation specific and cannot be generalized. The OxivirTB® AHP formulation resulted in statistically significantly (p = 0.0023 lower levels of toxigenic C. difficile spores in toilets of patients with CDAD compared to the SHP formulation that was routinely being used (28% vs 45% culture positive. The background level of toxigenic C. difficile spores was 10% in toilets of patients with diarrhea not due to CDAD. The UVM audit indicated that despite the enhanced twice-daily cleaning protocol for CDAD patients cleaning was not achieved on approximately 30 - 40% of the days tested. Conclusion Our data indicate that the AHP formulation evaluated that has some sporicidal activity was significantly better than the currently used SHP formulation. This AHP

  3. Development of environment-friendly water-based cleaning agent for heavy oil foulant in kitchen ventilator with high detergency%高效油烟机重油垢环保型水基清洗剂的研制

    Institute of Scientific and Technical Information of China (English)

    李玉军; 蔡卫权; 宋素娟; 王文; 曹宏

    2013-01-01

    An efficient,environmentally safe and low-cost novel water-based cleaning agent was successfully developed for the heavy oil foulant in kitchen ventilator. Based on the orthogonal experiment with 7 factors and 3 levels of L18 (37),the optimal ingredients and their mass percentage of the cleaning agent are as follows:a certain anionic surfactant F 4%,APG 3.5%,AEO-91%,LAS 0.5%, sodium citrate 1%, triethanolamine 3%. Detergency of the cleaning agent and the commercial multi-purpose cleaning agent for kitchen were comparatively studied with dilution ratio of (0-10)∶1 at the temperatures of 10℃ and 30℃,respectively. It was found that the former has much higher decontamination rate than that of the latter,and its decontamination rate is still more than 90% with dilution ratio of 10∶1. The as-prepared cleaning agent from cheap industrial raw materials is applicable in a wide temperature range,with excellent comprehensive cleaning performance and simple preparation process,and shows a good application prospect.%  针对油烟机重油垢的特点,成功研制了高效、环保安全的低成本新型水基清洗剂。7因素、3水平的L18(37)正交实验确定其最佳配方组成为:4%阴离子型表面活性剂 F、3.5%烷基糖苷、1.0%脂肪醇聚氧乙烯醚硫酸钠、0.5%十二烷基苯磺酸钠、1%柠檬酸钠和3%三乙醇胺。进一步在10℃和30℃下对比研究了自制清洗剂和市售某品牌厨房多用清洗剂稀释0~10倍的去污力,前者明显优于后者,且稀释10倍后的去污力仍高达90%以上。本研究从廉价的工业品原料制备的近中性水基清洗剂适用温度范围较宽,综合清洗性能优异,且制备工艺简单,具有广泛的应用前景。

  4. Development of environment-friendly weak acid water-based cleaning agent with strong detergency on heavy oil%环保型高效稠油垢弱酸性水基清洗剂的研制

    Institute of Scientific and Technical Information of China (English)

    古蒙蒙; 涂文辉; 桂绍庸; 蔡卫权; 林元虹; 李玉军; 曹宏

    2014-01-01

    采用廉价易得、易生物降解的工业表面活性剂为基本配方、自来水为溶剂,成功地研制出一种温和型高效稠油垢水基清洗剂。通过正交实验、主要活性物含量和清洗剂的浓缩等实验确定室温下其较优配方组成为:磺化琥珀酸二辛酯钠盐4.4%、脂肪醇聚氧乙烯醚硫酸钠4.4%、烷基糖苷6.4%和椰油酸胺丙基甜菜碱7.5%,其去污力高达98.2%。结果说明自制清洗剂的综合清洗性能略优于市售品牌清洗剂1和市售品牌清洗剂2;此外,其 pH值为6.5,呈微弱酸性,这与市售品牌清洗剂偏碱性不同,为新型高效稠油垢水基清洗剂的配制提供了新的思路。%A mild water-based cleaning agent with strong detergency on heavy oil foulant was successfully developed by choosing cheap,easily accessible and biodegradable surfactants as basic ingredients and tap water as solvent. Its key ingredients and the corresponding percentages were determined by orthogonal experiments , the percentage of the main active substance and the concentration of the as-prepared cleaning agent are as follows:sodium diethylhexylsulfosuccinate 4.4%,sodium alcohol ether sulphate 4.4%,alkyl polyglucoside 6.4%,cocoamidopropylbetaine 7.5%, and its detergency rate can reach 98.2% at 25℃. It was concluded that the comprehensive cleaning performance of the as-prepared cleaning agent is better than that of the commercial brand detergent 1 and the commercial brand detergent 2. Moreover,its pH is only 6.5 showing very weak acidity which is different from the traditional cleaning agent showing basic,and thus provides a new idea for the development of novel water-based cleaning agent with strong detergency on heavy oil foulant.

  5. Plasma Cleaning

    Science.gov (United States)

    Hintze, Paul E.

    2016-01-01

    NASA's Kennedy Space Center has developed two solvent-free precision cleaning techniques: plasma cleaning and supercritical carbon dioxide (SCCO2), that has equal performance, cost parity, and no environmental liability, as compared to existing solvent cleaning methods.

  6. Reactor vessel stud cleaning machine

    International Nuclear Information System (INIS)

    A device is described for cleaning and decontaminating an elongate member having a three dimensional surface topography comprising: an enclosure; means for rotatingly supporting the elongate member proximate the ends thereof within the enclosure; means for driving the elongate member supporting means, to rotate the elongate member; a supply tank for holding water; a spray nozzle connected to the supply tank and disposed within the enclosure operable to move transversely with respect to the elongate member for spraying a cleaning agent comprising high pressure water and abrasive grit against the rotating elongate member; a self-contained means for supplying the cleaning agent to the spray nozzle and removing spent cleaning agent from the enclosure, the self-contained means including the supply tank and means for disposing of any contaminated solids in the spent cleaning agent. The means for disposing further comprises means for removing spent cleaning agent from the enclosure, means for removing solid particles from the spent cleaning agent and means for recycling water from the spent cleaning agent back to the spray nozzle; and a control system for selectively controlling at least one of the rate of rotation of the elongate member and rate of trasversal of the elongate member and by the spray nozzle in accordance with the topography of the elongate member

  7. Effect of application of pretreatment cleaning agents on final cleaning quality%预处理清洁剂应用方法对最终清洗质量影响的研究

    Institute of Scientific and Technical Information of China (English)

    李根娣; 蒋红; 刘刚建; 钱滨霞

    2011-01-01

    OBJECTIVE To find out the solution of the multi-enzyme pretreatment steps and reasonable way to replace the cleaning in the view of quality control from the cleaning point and guarantee a reasonable cost to reuse the cleaning surgical instruments, sterile instruments and guarantee the quality of the final cleaning. METHODS A total of 120 items collected from the same package for the same kind of surgery after surgery clamps contaminated batch of the following process were divided into three groups (A group, B group, C group) for the following processes, RUHOF pretreatment multi-enzyme cleaning solution was applied for the cleaning and disinfection procedures of the same device, re-use multi-enzyme pretreatment solution, the pretreatment device after the completion of cleaning and disinfection procedures were carried out ATP fluorescence detection. RESULTS After the repeated use of multi-enzyme pretreatment solution, the difference of the quality of pretreatment was statistically significant, so was the difference of the final cleaning quality (P<0.01, P<0.05). CONCLUSION To ensure the quality of the final cleaning, multi-enzyme pretreatment cleaning step must be done. Multi-enzyme pretreatment solution is also a need for a wash and only by this way, the quality of cleaning can be guaranteed and cross-contamination can be prevented.%目的 研究预处理步骤的多酶清洗液的合理更换方法,以求以合理的成本去保证复用手术器械的清洗质量,从而最终保证器械的无菌质量.方法 将120件来源于同种手术包的进行同种手术后被污染的止血钳分为3个组(A、B、C组)进行预处理流程,鲁沃夫多酶清洗液预处理后再进行清洗消毒器同一程序清洗,多酶预处理液重复使用,在预处理后与清洗消毒器完成清洗程序后分别进行ATP荧光检测.结果 多酶预处理液重复使用后,预处理的质量差异有统计学意义;对于最终清洗质量差异有

  8. Clean data

    CERN Document Server

    Squire, Megan

    2015-01-01

    If you are a data scientist of any level, beginners included, and interested in cleaning up your data, this is the book for you! Experience with Python or PHP is assumed, but no previous knowledge of data cleaning is needed.

  9. Effect of Time in Chemical Cleaning of Ultrafiltration Membranes

    NARCIS (Netherlands)

    I. Levitsky; R. Naim; A. Duek; V. Gitis

    2012-01-01

    Chemical cleaning of ultrafiltration membranes is often considered successful when the flux through a cleaned membrane is much higher than through a pristine one. Here, a novel definition of cleaning intensity is proposed as the product of the concentration of the cleaning agent and the cleaning tim

  10. Clean catch urine sample

    Science.gov (United States)

    Urine culture - clean catch; Urinalysis - clean catch; Clean catch urine specimen; Urine collection - clean catch ... lips" (labia). You may be given a special clean-catch kit that contains sterile wipes. Sit on ...

  11. Dry Cleaning

    OpenAIRE

    Shirley, Lindsey; Weller, Chanae

    2010-01-01

    Despite its name, commercial dry cleaning is not actually a “dry” process. Clothes are immersed in a solvent, most commonly perchlorethylene (perc), instead of in water. Perc or other similar solvents are effective in the removal of oil and grease-based stains without damaging or shrinking sensitive fabrics, unlike a regular detergents and fabric softeners.

  12. Clean cars

    Energy Technology Data Exchange (ETDEWEB)

    Piffaretti, M.

    2008-07-01

    This well-illustrated presentation made at the Swiss 2008 research conference on traffic by the Protoscar company takes a look at research, design, engineering and communication topics in the area of 'clean cars'. The present situation with electrically driven and hybrid-drive cars is reviewed and the chances and problems of the present-day vehicles are examined. New developments and a number of vehicles that should be on the market in the period from 2012 to 2015 are presented. Also, 'clean' specialist vehicles such as trucks and buses are reviewed. Battery systems and associated problems and new developments are looked at. The promotion scheme in Mendrisio, Switzerland is reviewed. Bottom-up and top-down approaches are discussed and future market developments are looked at, as are promotional activities in various countries.

  13. ASRM process development in aqueous cleaning

    Science.gov (United States)

    Swisher, Bill

    1992-12-01

    Viewgraphs are included on process development in aqueous cleaning which is taking place at the Aerojet Advanced Solid Rocket Motor (ASRM) Division under a NASA Marshall Space and Flight Center contract for design, development, test, and evaluation of the ASRM including new production facilities. The ASRM will utilize aqueous cleaning in several manufacturing process steps to clean case segments, nozzle metal components, and igniter closures. ASRM manufacturing process development is underway, including agent selection, agent characterization, subscale process optimization, bonding verification, and scale-up validation. Process parameters are currently being tested for optimization utilizing a Taguci Matrix, including agent concentration, cleaning solution temperature, agitation and immersion time, rinse water amount and temperature, and use/non-use of drying air. Based on results of process development testing to date, several observations are offered: aqueous cleaning appears effective for steels and SermeTel-coated metals in ASRM processing; aqueous cleaning agents may stain and/or attack bare aluminum metals to various extents; aqueous cleaning appears unsuitable for thermal sprayed aluminum-coated steel; aqueous cleaning appears to adequately remove a wide range of contaminants from flat metal surfaces, but supplementary assistance may be needed to remove clumps of tenacious contaminants embedded in holes, etc.; and hot rinse water appears to be beneficial to aid in drying of bare steel and retarding oxidation rate.

  14. Saltstone Clean Cap Formulation

    Energy Technology Data Exchange (ETDEWEB)

    Langton, C

    2005-04-22

    Clean Cap mix generates more bleed water than the reference Saltstone formulation because the specific gravity of water, the carrier fluid, is less than that of the carrier fluid in Saltstone, 1 versus 1.1 to 1.2, respectively. In addition, the development of slurry structure as a result of hydration reactions is slightly slower than in the salt solution slurry. In other words, the Clean Cap mix has a slightly longer gel time. The lower density of the carrier fluid and the slower development of slurry structure, enable more settling to occur (more standing water) in the Clean Cap slurry. Consequently, for the same rheological properties, the Clean Cap slurry will have more bleed water. In an attempt to reduce the bleed water, the water to premix ratio was lowered and dispersants (high range water reducers) were added. Below water to premix ratios of 0.35, little bleed water and settling was observed. However, a low water to premix Clean Cap mix is not recommended because processing has not been demonstrated in the Saltstone facility. The lowest water to premix ratio processed in Z-Area was 0.478 in the last attempt to produce a clean cap. Although this option may provide significant advantages (less bleed water and potentially better flow) process testing in the Saltstone Facility or in a pilot scale facility in conjunction with laboratory testing will be required to demonstrate mixing, pumping and flow properties. Other additives were tested to minimize bleed water. These additives were found to be unsatisfactory in one or more ways and therefore, were not recommended at this time. An air entraining agent and a thickener had some benefit in reducing bleed water but were found too difficult to implement as an additive in the Saltstone facility. Surfactants (air entrainers) added to the mixing water in the hold tank could generate foam as the result of agitation to mix the tank, and the thickener increased the apparent viscosity and yield stress.

  15. Transition to Clean Technology

    OpenAIRE

    Acemoglu, Daron; Akcigit, Ufuk; Hanley, Douglas; Kerr,William Robert

    2014-01-01

    We develop a microeconomic model of endogenous growth where clean and dirty technologies compete in production and innovation-in the sense that research can be directed to either clean or dirty technologies. If dirty technologies are more advanced to start with, the potential transition to clean technology can be difficult both because clean research must climb several steps to catch up with dirty technology and because this gap discourages research effort directed towards clean technologies....

  16. Cleaning supplies and equipment

    Science.gov (United States)

    ... gov/ency/patientinstructions/000443.htm Cleaning supplies and equipment To use the sharing features on this page, ... to clean supplies and equipment. Disinfecting Supplies and Equipment Start by wearing the right personal protective equipment ( ...

  17. Chemical cleaning of potable water membranes: A review

    OpenAIRE

    Porcelli, Nicandro; Judd, Simon J.

    2010-01-01

    The literature on chemical cleaning of polymeric hollow fibre ultrafiltration and microfiltration membranes used in the filtration of water for municipal water supply is reviewed. The review considers the chemical cleaning mechanism, and the perceived link between this and membrane fouling by natural organic matter (NOM)—the principal foulant in municipal potable water applications. Existing chemical cleaning agents used for this duty are considered individually and their cl...

  18. A METHOD OF, AND APPARATUS FOR, CLEANING A TANK

    NARCIS (Netherlands)

    Verbeek, D.G.F.

    1991-01-01

    Abstract of WO 9105620 (A1) Method and apparatus for cleaning a storage or transport tank or similar receptacle by spraying a cleaning agent against the interior wall using at least one spray nozzle, said nozzle making a rotating movement in a plane, while said plane is simultaneously revolved a

  19. Analysis of Inlfuencing Factors about Cleaning Effect of Automatic Cleaning Machine%全自动清洗机清洗效果影响因素分析

    Institute of Scientific and Technical Information of China (English)

    徐金荣; 洪范宗; 苏秋玲

    2013-01-01

    目的探讨全自动清洗机清洗效果的影响因素。方法全自动清洗机清洗器械时,在清洗夹中放置STF清洗效果检测卡进行检测。结果清洗剂、清洗温度、清洗时间等参数会对最终清洗效果产生影响;喷淋臂、加酶泵、清洗泵、器械装载等故障也会对最终清洗效果产生影响。结论全自动清洗机清洗效果的影响因素主要为清洗参数和机械故障。%Objective To explore the influencing factors about cleaning effect of automatic cleaning machine. Methods When the instruments are being cleaned by automatic cleaning machine, placing STF cleaning effect detection card in cleaning clamp to check the cleaning effect. Results Cleaning parameters such as cleaning agents, cleaning temperature and cleaning time have an impact on the ifnal cleaning effect. Mechanical failures such as pray arm failure, enzyme pump failure, cleaning pump failure and instrument loading failure also have an impact on the ifnal cleaning effect. Conclusion The main Inlfuencing factors about cleaning effect of automatic cleaning machine includes cleaning parameters and mechanical failures.

  20. Preperation for a Clean Surface

    Directory of Open Access Journals (Sweden)

    Aurimas Ralys

    2012-12-01

    Full Text Available The article reviews techniques for preparing clean surfaces used in the manufacturing process, considers the types of clean surfaces and their role in modern production and provides the classification methods of arranging such surfaces. The paper also discusses the principles of methods for solvent cleaning, aqueous cleaning, ultrasonic cleaning, precision cleaning and mechanical cleaning. The study focuses on the possibility of adjusting a clean surface using a water flow, including cavitation.Article in Lithuanian

  1. Preperation for a Clean Surface

    Directory of Open Access Journals (Sweden)

    Aurimas Ralys

    2013-02-01

    Full Text Available The article reviews techniques for preparing clean surfaces used in the manufacturing process, considers the types of clean surfaces and their role in modern production and provides the classification methods of arranging such surfaces. The paper also discusses the principles of methods for solvent cleaning, aqueous cleaning, ultrasonic cleaning, precision cleaning and mechanical cleaning. The study focuses on the possibility of adjusting a clean surface using a water flow, including cavitation.Article in Lithuanian

  2. Preperation for a Clean Surface

    OpenAIRE

    Aurimas Ralys; Valdemar Prokopovič; Vytautas Striška

    2013-01-01

    The article reviews techniques for preparing clean surfaces used in the manufacturing process, considers the types of clean surfaces and their role in modern production and provides the classification methods of arranging such surfaces. The paper also discusses the principles of methods for solvent cleaning, aqueous cleaning, ultrasonic cleaning, precision cleaning and mechanical cleaning. The study focuses on the possibility of adjusting a clean surface using a water flow, including cavitati...

  3. A METHOD OF, AND APPARATUS FOR, CLEANING A TANK

    OpenAIRE

    Verbeek, D.G.F.

    1991-01-01

    Abstract of WO 9105620 (A1) Method and apparatus for cleaning a storage or transport tank or similar receptacle by spraying a cleaning agent against the interior wall using at least one spray nozzle, said nozzle making a rotating movement in a plane, while said plane is simultaneously revolved around an axis which makes an angle with the axis of rotation of the nozzle, the point of impingement of a jet of cleaning agent delivered by the nozzle describing a track over the interior wall of the ...

  4. Clean Energy Progress Report

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2011-07-01

    For the past several years, the IEA and others have been calling for a clean energy revolution to achieve global energy security, economic growth and climate change goals. This report analyses for the first time progress in global clean energy technology deployment against the pathways that are needed to achieve these goals. It provides an overview of technology deployment status, key policy developments and public spending on RDD&D of clean energy technologies.

  5. Infrared steam laser cleaning

    OpenAIRE

    Frank, Pascal; Lang, Florian; Mosbacher, Mario; Boneberg, Johannes; Leiderer, Paul

    2008-01-01

    Steam Laser Cleaning with a pulsed infrared laser source is investigated. The infrared light is tuned to the absorption maximum of water (λ = 2.94 µm, 10 ns), whereas the substrates used are transparent (glass, silicon). Thus a thin liquid water layer condensed on top of the contaminated substrate is rapidly heated. The pressure generated during the subsequent phase explosion generates a cleaning force which exceeds the adhesion of the particles. We examine the cleaning threshold in single sh...

  6. Cleaning and surface properties

    CERN Document Server

    Taborelli, M

    2007-01-01

    Principles of precision cleaning for ultra high vacuum applications are reviewed together with the techniques for the evaluation of surface cleanliness. Methods to verify the effectiveness of cleaning procedures are discussed. Examples are presented to illustrate the influence of packaging and storage on the recontamination of the surface after cleaning. Finally, the effect of contamination on some relevant surface properties, like secondary electron emission and wettability is presented.

  7. Clean Energy Manufacturing Initiative

    Energy Technology Data Exchange (ETDEWEB)

    None

    2013-04-01

    The initiative will strategically focus and rally EERE’s clean energy technology offices and Advanced Manufacturing Office around the urgent competitive opportunity for the United States to be the leader in the clean energy manufacturing industries and jobs of today and tomorrow.

  8. Correlating Cleaning Thoroughness with Effectiveness and Briefly Intervening to Affect Cleaning Outcomes: How Clean Is Cleaned?

    Science.gov (United States)

    Hosford, Eve; Ong, Ana; Richesson, Douglas; Fraser, Susan; Kwak, Yoon; Miller, Sonia; Julius, Michael; McGann, Patrick; Lesho, Emil

    2016-01-01

    Objectives The most efficient approach to monitoring and improving cleaning outcomes remains unresolved. We sought to extend the findings of a previous study by determining whether cleaning thoroughness (dye removal) correlates with cleaning efficacy (absence of molecular or cultivable biomaterial) and whether one brief educational intervention improves cleaning outcomes. Design Before-after trial. Setting Newly built community hospital. Intervention 90 minute training refresher with surface-specific performance results. Methods Dye removal, measured by fluorescence, and biomaterial removal and acquisition, measured with culture and culture-independent PCR-based assays, were clandestinely assessed for eight consecutive months. At this midpoint, results were presented to the cleaning staff (intervention) and assessments continued for another eight consecutive months. Results 1273 surfaces were sampled before and after terminal room cleaning. In the short-term, dye removal increased from 40.3% to 50.0% (not significant). For the entire study period, dye removal also improved but not significantly. After the intervention, the number of rooms testing positive for specific pathogenic species by culturing decreased from 55.6% to 36.6% (not significant), and those testing positive by PCR fell from 80.6% to 53.7% (P = 0.016). For nonspecific biomaterial on surfaces: a) removal of cultivable Gram-negatives (GN) trended toward improvement (P = 0.056); b) removal of any cultivable growth was unchanged but acquisition (detection of biomaterial on post-cleaned surfaces that were contaminant-free before cleaning) worsened (P = 0.017); c) removal of PCR-based detection of bacterial DNA improved (P = 0.046), but acquisition worsened (P = 0.003); d) cleaning thoroughness and efficacy were not correlated. Conclusion At this facility, a minor intervention or minimally more aggressive cleaning may reduce pathogen-specific contamination, but not without unintended consequences. PMID

  9. Preparation and evaluation of barium/stronitum scale cleaning agent in oilfield Wei-12-1%涠洲12-1油田钡锶垢除垢剂研制与评价

    Institute of Scientific and Technical Information of China (English)

    郑华安; 徐波; 麻路; 郭琦; 汤明娟

    2012-01-01

    涠洲12-1油田是海上油田,由于注入水(富含SO42-的海水)与地层水(含大量二价金属离子)配伍性很差,油井结垢严重,垢样含68%的BaSO4、25%的SrSO4和少量FeSO4等物质.研制了一种以EDTA为主剂的除垢剂,并对其除垢性能进行评价.结果表明,除垢剂最佳应用条件为:除垢温度为90℃,pH为11~12,除垢剂浓度为40%(体积分数),除垢48 h时除垢能力为46%.KCl和铁对除垢效果有负的影响.%The oil field of Weizhou 12-1 is the offshore oil field. The compatibility of injection water (sea water with rich SO42- ) and reservoir formation water(with rich divalent metal ions) is very bad and the seriou scaling has occurred in the oil wells. The sample scale consists of 68% BaS04,25% SrSO4 and a small amount of FeS04. A kind of scale dissolver that EDTA is the main solvent is developed, and its effect is evaluated. The results showed that the optimum conditions are as follows; working temperature is 90 ℃ ,pH is between 11 to 12 and scale dissolver concentration is 40% (volume fraction) ,scale can be cleaned about 46% in 48 h. The negative influence of potassium chloride and iron on removal effect.

  10. Clean Water Act

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The Clean Water Act (CWA) establishes the basic structure for regulating discharges of pollutants into U.S. waters and regulating quality standards for surface...

  11. Clean Elements in Abelian Rings

    Indian Academy of Sciences (India)

    Angelina Y M Chin

    2009-04-01

    Let be a ring with identity. An element in is said to be clean if it is the sum of a unit and an idempotent. is said to be clean if all of its elements are clean. If every idempotent in is central, then is said to be abelian. In this paper we obtain some conditions equivalent to being clean in an abelian ring.

  12. [Microbial colonization and various cleaning procedures for orthodontic appliances].

    Science.gov (United States)

    Diedrich, P

    1989-06-01

    The cleaning of removable appliances was analysed in three groups: 1. cleaning with tooth-brush/toothpaste, 2. self-acting cleansing agent, 3. ultrasonic treatment. In the same patient group identical plates were fitted each for one month and cleaned by the different procedures. The microbial population and the cleansing effects were analysed by scanning electron microscopy. The findings shows clearly, that the toothbrush alone is unsatisfactory for achieving effective decontamination in the hygiene-critical areas of the plates. In contrast to this cleansing tablets and ultrasonic treatment were more effective in plaque-accumulating areas. None of the cleansing procedures effected complete decontamination of the removable appliances. PMID:2767590

  13. Laser cleaning of Rakowicze sandstone

    OpenAIRE

    Nijland, T.G.; Wijffels, T.J.

    2003-01-01

    Decisions about the cleaning of natural stone should always be made within the awareness of direct and indirect damage that may be the result of cleaning. During the last decade, laser cleaning of objects and monuments of natural stone has become increasingly popular. Whereas a considerable amount of literature has been devoted to the effect of laser cleaning on marble and limestone, research into the effects on sandstone is limited. In the present paper, the effect of two cleaning methods, v...

  14. LensClean revisited

    CERN Document Server

    Wucknitz, O

    2004-01-01

    We discuss the LensClean algorithm which for a given gravitational lens model fits a source brightness distribution to interferometric radio data in a similar way as standard Clean does in the unlensed case. The lens model parameters can then be varied in order to minimize the residuals and determine the best model for the lens mass distribution. Our variant of this method is improved in order to be useful and stable even for high dynamic range systems with nearly degenerated lens model parameters. Our test case B0218+357 is dominated by two bright images but the information needed to constrain the unknown parameters is provided only by the relatively smooth and weak Einstein ring. The new variant of LensClean is able to fit lens models even in this difficult case. In order to allow the use of general mass models with LensClean, we develop the new method LenTil which inverts the lens equation much more reliably than any other method. This high reliability is essential for the use as part of LensClean. Finally...

  15. Multi-agent Justification Logic : communication and evidence elimination

    NARCIS (Netherlands)

    Renne, Bryan

    2012-01-01

    This paper presents a logic combining , a framework for reasoning about multi-agent communication, with a new multi-agent version of , a framework for reasoning about evidence and justification. This novel combination incorporates a new kind of that cleanly meshes with the multi-agent communications

  16. Hybrid Cleaning Technology for Enhanced Post-Cu/Low-Dielectric Constant Chemical Mechanical Planarization Cleaning Performance

    Science.gov (United States)

    Ramachandran, Manivannan; Cho, Byoung-Jun; Kwon, Tae-Young; Park, Jin-Goo

    2013-05-01

    During chemical mechanical planarization (CMP), a copper/low-k surface is often contaminated by abrasive particles, organic materials and other additives. These contaminants need to be removed in the subsequent cleaning process with minimum material loss. In this study, a dilute amine-based alkaline cleaning solution is used along with physical force in the form of megasonic energy to remove particles and organic contaminants. Tetramethylammonium hydroxide (TMAH) and monoethanolamine (MEA) are used as an organic base and complexing agent, respectively, in the proposed solution. Ethanolamine acts as a corrosion inhibitor in the solution. Organic residue removal was confirmed through contact angle measurements and X-ray photoelectron spectroscopy analysis. Electrochemical studies showed that the proposed solution increases protection against corrosion, and that the hybrid cleaning technology resulted in higher particle removal efficiency from both the copper and low-k surfaces.

  17. Antibiotic Agents

    Science.gov (United States)

    ... either as public health or as non-public health antimicrobial agents. What is the difference between bacteriostats, sanitizers, disinfectants ... bacteria, however, there is considerable controversy surrounding their health benefits. The ... producing agents (Table of Antibacterials) have been used for many ...

  18. Neutrino Detection With CLEAN

    CERN Document Server

    McKinsey, D N

    2005-01-01

    This article describes CLEAN, an approach to the detection of low-energy solar neutrinos and neutrinos released from supernovae. The CLEAN concept is based on the detection of elastic scattering events (neutrino-electron scattering and neutrino-nuclear scattering) in liquified noble gases such as liquid helium, liquid neon, and liquid xenon, all of which scintillate brightly in the ultraviolet. Key to the CLEAN technique is the use of a thin film of wavelength-shifting fluor to convert the ultraviolet scintillation light to the visible. This allows the same liquid to be used as both a passive shielding medium and an active self-shielding detector, allowing lower intrinsic radioactive backgrounds at low energies. Liquid neon is a particularly promising medium for CLEAN. Because liquid neon has a high scintillation yield, has no long-lived radioactive isotopes, and can be easily purified by use of cold traps, it is an ideal medium for the detection of rare nuclear events. In addition, neon is inexpensive, dense...

  19. Road-Cleaning Device

    Science.gov (United States)

    Roman, Harry T.

    2014-01-01

    Roadways are literally soaked with petrochemical byproducts, oils, gasoline, and other volatile substances that eventually run off into sewers and end up in rivers, waterways, and other undesirable places. Can the roads be cleaned of these wastes, with their proper disposal? Can vehicles, robots, or other devices be designed that could be driven…

  20. Cleanly: trashducation urban system

    DEFF Research Database (Denmark)

    Reif, Inbal; Alt, Florian; Ramos, Juan David Hincapie;

    are exacerbated by a poor personal trash management culture. In this paper we present Cleanly, an urban trashducation system aimed at creating awareness of garbage production and management, which may serve as an educational plat-form in the urban environment. We report on data collected from an online survey...

  1. Clean Cities Tools

    Energy Technology Data Exchange (ETDEWEB)

    None

    2014-12-19

    The U.S. Department of Energy's Clean Cities offers a large collection of Web-based tools on the Alternative Fuels Data Center. These calculators, interactive maps, and data searches can assist fleets, fuels providers, and other transportation decision makers in their efforts to reduce petroleum use.

  2. WINDOW-CLEANING

    CERN Multimedia

    Environmental Section / ST-TFM

    2001-01-01

    The two-month window-cleaning session on the Meyrin, Prévessin and LEP sites will soon begin. The cleaning contractors will work from Monday to Saturday, every week from 4.00 a.m. to 8.00 p.m. The work will be organised so as to disturb users as little as possible. In any event, a work notice will be left in each office 24 hours beforehand. To prevent any damage to documents or items which could occur despite the precautions taken, please clear completely the window-sills and the area immediately around them. If, however, for valid reasons, the work cannot be done on the scheduled day, please inform the Environmental Section by telephoning: 73753 / 74233 / 72242 If you are going to be absent during this two-month period, we should be grateful if you would clear the above mentioned areas before your departure. REMINDER To allow more thorough cleaning of the entrance doors to buildings and also facilitate the weekly work of the cleaning contractors, we ask you to make use of the notice boards at the...

  3. Use of rhamnolipid biosurfactant for membrane biofouling prevention and cleaning.

    Science.gov (United States)

    Kim, Lan Hee; Jung, Yongmoon; Kim, Sung-Jo; Kim, Chang-Min; Yu, Hye-Weon; Park, Hee-Deung; Kim, In S

    2015-01-01

    Rhamnolipids were evaluated as biofouling reducing agents in this study. The permeability of the bacterial outer membrane was increased by rhamnolipids while the growth rate of Pseudomonas aeruginosa was not affected. The surface hydrophobicity was increased through the release of lipopolysaccharides and extracellular polymeric substances from the outer cell membrane. Rhamnolipids were evaluated as agents for the prevention and cleaning of biofilms. A high degree of biofilm detachment was observed when the rhamnolipids were used as a cleaning agent. In addition, effective biofilm reduction occurred when rhamnolipids were applied to various species of Gram-negative bacteria isolated from seawater samples. Biofilm reduction using rhamnolipids was comparable to commercially available surfactants. In addition, 20% of the water flux was increased after rhamnolipid treatment (300 μg ml(-1), 6 h exposure time) in a dead-end filtration system. Rhamnolipids appear to have promise as biological agents for reducing membrane biofouling.

  4. Clean Energy Solutions Center Services

    Energy Technology Data Exchange (ETDEWEB)

    2016-03-01

    The Solutions Center offers no-cost expert policy assistance, webinars and training forums, clean energy policy reports, data, and tools provided in partnership with more than 35 leading international and regional clean energy organizations.

  5. Sustainable development with clean coal

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-08-01

    This paper discusses the opportunities available with clean coal technologies. Applications include new power plants, retrofitting and repowering of existing power plants, steelmaking, cement making, paper manufacturing, cogeneration facilities, and district heating plants. An appendix describes the clean coal technologies. These include coal preparation (physical cleaning, low-rank upgrading, bituminous coal preparation); combustion technologies (fluidized-bed combustion and NOx control); post-combustion cleaning (particulate control, sulfur dioxide control, nitrogen oxide control); and conversion with the integrated gasification combined cycle.

  6. Laser cleaning of Rakowicze sandstone

    NARCIS (Netherlands)

    Nijland, T.G.; Wijffels, T.J.

    2003-01-01

    Decisions about the cleaning of natural stone should always be made within the awareness of direct and indirect damage that may be the result of cleaning. During the last decade, laser cleaning of objects and monuments of natural stone has become increasingly popular. Whereas a considerable amount o

  7. Fuel assemblies chemical cleaning

    International Nuclear Information System (INIS)

    NPP Paks found a thermal-hydraulic anomaly in the reactor core during cycle 14 that was caused by corrosion product deposits on fuel assemblies (FAs) that increased the hydraulic resistance of the FAs. Consequently, the coolant flow through the FAs was insufficient resulting in a temperature asymmetry inside the reactor core. Based on this fact NPP Paks performed differential pressure measurements of all fuel assemblies in order to determine the hydraulic resistance and subsequently the limit values for the hydraulic acceptance of FAs to be used. Based on the hydraulic investigations a total number of 170 FAs was selected for cleaning. The necessity for cleaning the FAs was explained by the fact that the FAs were subjected to a short term usage in the reactor core only maximum of 1,5 years and had still a capacity for additional 2 fuel cycles. (authors)

  8. Indonesia's Clean Air Program

    OpenAIRE

    Budy P. Resosudarmo

    2002-01-01

    Unprecedented industrial development in Indonesia during the last two decades, accompanied by a growing population, has increased the amount of environmental damage. One of the most important environmental problems is that the level of air pollution in several large cities has become alarming, particularly in the last few years. This high pollution level has stimulated the government to develop a national clean air program designed to control the quantity of pollutants in the air. However, th...

  9. Clean Power on Tap

    Institute of Scientific and Technical Information of China (English)

    2009-01-01

    China adopts the most advanced nuclear power technologies to meet long-term energy needs Nuclear power has taken center stage in China’s nationwide cam-paign to develop new and clean energy sources. In the latest effort, Chinese state-owned nuclear power giants invested over 40 billion yuan ($5.86 billion) as an initial funding injection to build a new plant under the

  10. A Clean Market

    Institute of Scientific and Technical Information of China (English)

    MAGGIECHEN

    2004-01-01

    If you have US$1 million, do you invest in car production or cleaning car emissions? More cars than ever are hitting the roads and demand is rising.Cleaner cars are being called for, as the government strives to reduce car emission. So there is an obvious market both for cars and for new emission control technologies.Theoretically, you should make money by investing in either of them in China today.

  11. Clean steels for fusion

    Energy Technology Data Exchange (ETDEWEB)

    Gelles, D.S.

    1995-03-01

    Fusion energy production has an inherent advantage over fission: a fuel supply with reduced long term radioactivity. One of the leading candidate materials for structural applications in a fusion reactor is a tungsten stabilized 9% chromium Martensitic steel. This alloy class is being considered because it offers the opportunity to maintain that advantage in the reactor structure as well as provide good high temperature strength and radiation induced swelling and embrittlement resistance. However, calculations indicate that to obtain acceptable radioactivity levels within 500 years after service, clean steel will be required because the niobium impurity levels must be kept below about 2 appm and nickel, molybdenum, nitrogen, copper, and aluminum must be intentionally restricted. International efforts are addressing the problems of clean steel production. Recently, a 5,000 kg heat was vacuum induction melted in Japan using high purity commercial raw materials giving niobium levels less than 0.7 appm. This paper reviews the need for reduced long term radioactivity, defines the advantageous properties of the tungsten stabilized Martensitic steel class, and describes the international efforts to produce acceptable clean steels.

  12. Agent, autonomous

    OpenAIRE

    Luciani, Annie

    2007-01-01

    The expression autonomous agents, widely used in virtual reality, computer graphics, artificial intelligence and artificial life, corresponds to the simulation of autonomous creatures, virtual (i.e. totally computed by a program), or embodied in a physical envelope, as done in autonomous robots.

  13. Clean electricity from photovoltaics

    CERN Document Server

    Green, Martin A

    2015-01-01

    The second edition of Clean Electricity from Photovoltaics , first published in 2001, provides an updated account of the underlying science, technology and market prospects for photovoltaics. All areas have advanced considerably in the decade since the first edition was published, which include: multi-crystalline silicon cell efficiencies having made impressive advances, thin-film CdTe cells having established a decisive market presence, and organic photovoltaics holding out the prospect of economical large-scale power production. Contents: The Past and Present (M D Archer); Limits to Photovol

  14. Clean fuels from biomass

    Science.gov (United States)

    Hsu, Y.-Y.

    1976-01-01

    The paper discusses the U.S. resources to provide fuels from agricultural products, the present status of conversion technology of clean fuels from biomass, and a system study directed to determine the energy budget, and environmental and socioeconomic impacts. Conversion processes are discussed relative to pyrolysis and anaerobic fermentation. Pyrolysis breaks the cellulose molecules to smaller molecules under high temperature in the absence of oxygen, wheras anaerobic fermentation is used to convert biomass to methane by means of bacteria. Cost optimization and energy utilization are also discussed.

  15. International Clean Energy Coalition

    Energy Technology Data Exchange (ETDEWEB)

    Erin Skootsky; Matt Gardner; Bevan Flansburgh

    2010-09-28

    In 2003, the National Association of Regulatory Utility Commissioners (NARUC) and National Energy Technology Laboratories (NETL) collaboratively established the International Clean Energy Coalition (ICEC). The coalition consisting of energy policy-makers, technologists, and financial institutions was designed to assist developing countries in forming and supporting local approaches to greenhouse gas mitigation within the energy sector. ICEC's work focused on capacity building and clean energy deployment in countries that rely heavily on fossil-based electric generation. Under ICEC, the coalition formed a steering committee consisting of NARUC members and held a series of meetings to develop and manage the workplan and define successful outcomes for the projects. ICEC identified India as a target country for their work and completed a country assessment that helped ICEC build a framework for discussion with Indian energy decisionmakers including two follow-on in-country workshops. As of the conclusion of the project in 2010, ICEC had also conducted outreach activities conducted during United Nations Framework Convention on Climate Change (UNFCCC) Ninth Conference of Parties (COP 9) and COP 10. The broad goal of this project was to develop a coalition of decision-makers, technologists, and financial institutions to assist developing countries in implementing affordable, effective and resource appropriate technology and policy strategies to mitigate greenhouse gas emissions. Project goals were met through international forums, a country assessment, and in-country workshops. This project focused on countries that rely heavily on fossil-based electric generation.

  16. CHEMICAL CLEANING OF NANOFILTRATION MEMBRANES FOULED BY ORGANIC MATTERS

    Directory of Open Access Journals (Sweden)

    CHARLENE C. H. KOO

    2016-07-01

    Full Text Available Membrane fouling is a term to describe non-integral substance on membrane surface which results in rapid decline of permeation flux and deteriorate the performance of membrane. Chemical cleaning agents especially like alkaline cleaners are most widely employed to restore the membrane performance. This research mainly investigated the potential use of sodium hydroxide (NaOH and sodium hypochlorite (NaOCl as the chemical cleaning agents to restore the permeate flux of organically fouled nanofiltration (NF membranes under varying applied pressure and flow condition. The performances of the cleaning protocols were quantified using flux recovery and resistance removal. The results demonstrated that NaOCl is more effective than NaOH. This observation is also in line with FTIR analysis in which the transmittance intensity showed by FTIR spectra of NaOCl is higher than that of NaOH. The results also reported that higher flux recovery and resistance removal were achieved when the fouled NF membranes were cleaned with higher concentration of chemical agents and applied pressure. However, the improvements of flux recovery and resistance removal by increasing the applied pressure were found insignificant at higher applied pressure range (16 to 18 bar than the lower applied pressure range (i.e. 12 to 14 bar. This research plays an important role by identifying the key parameters that could restore the flux of organically fouled NF membranes significantly.

  17. Online soot cleaning using infrasound

    Energy Technology Data Exchange (ETDEWEB)

    Torra i Fernandez, Eric; Ellebro, Martin [Infrafone AB, Stockholm (Sweden)

    2013-10-01

    The company Infrafone has been using infrasound as a soot cleaning method for more than 30 years. Infrasonic soot cleaning increases the efficiency, the availability and the lifetime of marine and industrial boilers. The properties and the description of infrasound and Infrafone's soot cleaning method are presented. Moreover, a brief comparison with audible sonic horns is carried out. The results and the savings of installing Infrafone's infrasonic cleaners are presented here with several case studies. (orig.)

  18. Clean coal technologies market potential

    Energy Technology Data Exchange (ETDEWEB)

    Drazga, B. (ed.)

    2007-01-30

    Looking at the growing popularity of these technologies and of this industry, the report presents an in-depth analysis of all the various technologies involved in cleaning coal and protecting the environment. It analyzes upcoming and present day technologies such as gasification, combustion, and others. It looks at the various technological aspects, economic aspects, and the various programs involved in promoting these emerging green technologies. Contents: Industry background; What is coal?; Historical background of coal; Composition of coal; Types of coal; Environmental effects of coal; Managing wastes from coal; Introduction to clean coal; What is clean coal?; Byproducts of clean coal; Uses of clean coal; Support and opposition; Price of clean coal; Examining clean coal technologies; Coal washing; Advanced pollution control systems; Advanced power generating systems; Pulverized coal combustion (PCC); Carbon capture and storage; Capture and separation of carbon dioxide; Storage and sequestration of carbon dioxide; Economics and research and development; Industry initiatives; Clean Coal Power Initiative; Clean Coal Technology Program; Coal21; Outlook; Case Studies.

  19. Gas-Liquid Supersonic Cleaning and Cleaning Verification Spray System

    Science.gov (United States)

    Parrish, Lewis M.

    2009-01-01

    NASA Kennedy Space Center (KSC) recently entered into a nonexclusive license agreement with Applied Cryogenic Solutions (ACS), Inc. (Galveston, TX) to commercialize its Gas-Liquid Supersonic Cleaning and Cleaning Verification Spray System technology. This technology, developed by KSC, is a critical component of processes being developed and commercialized by ACS to replace current mechanical and chemical cleaning and descaling methods used by numerous industries. Pilot trials on heat exchanger tubing components have shown that the ACS technology provides for: Superior cleaning in a much shorter period of time. Lower energy and labor requirements for cleaning and de-scaling uper.ninih. Significant reductions in waste volumes by not using water, acidic or basic solutions, organic solvents, or nonvolatile solid abrasives as components in the cleaning process. Improved energy efficiency in post-cleaning heat exchanger operations. The ACS process consists of a spray head containing supersonic converging/diverging nozzles, a source of liquid gas; a novel, proprietary pumping system that permits pumping liquid nitrogen, liquid air, or supercritical carbon dioxide to pressures in the range of 20,000 to 60,000 psi; and various hoses, fittings, valves, and gauges. The size and number of nozzles can be varied so the system can be built in configurations ranging from small hand-held spray heads to large multinozzle cleaners. The system also can be used to verify if a part has been adequately cleaned.

  20. Cleaning results of new and fouled nanofiltration membrane characterized by contact angle, updated DSPM, flux and salts rejection

    International Nuclear Information System (INIS)

    In membrane process industries, membrane cleaning is one of the most important concerns from both economical and scientific points of view. Though cleaning is important to recover membrane performance, an inappropriate selection of cleaning agents may result into unsatisfactory cleaning or irreparable membrane. In this study the cleaning performance has been studied with measurements of membrane contact angle, Updated Donnan steric partitioning pore model (UDSPM) and salt rejection as well as flux measurement. Thin film nanofiltration (NF) membranes such as DK, HL and DL provided by GE Osmonics are used in this study. Tests were carried out with virgin DK, HL and DL as well as fouled DK membranes. Several cleaning agents were investigated; some of them were analytical grade such as HCl, NaOH and others such as SDS, mix agents were commercial grade agents that are already in use in commercial plants. Contact angle, DSPM and salt rejection as well as flux of virgin and fouled membranes before and after chemical cleaning were measured and compared. The contact angle measurements with and without chemical cleaning of different virgin and fouled membranes revealed very interesting results which may be used to characterise the membrane surface cleanliness. The contact angle results revealed that the cleaning agents are found to modify membrane surface properties (hydrophobicity/hydrophilicity) of the treated and untreated virgin and fouled membranes. The details of these results were also investigated and are reported in the paper. However, UDSPM method did not give any valuable information about pore size of the untreated and treated NF membranes. The salt rejection level of monovalent and divalent ions before and after cleaning by high and low pH cleaning agents is also investigated and is reported in the paper

  1. Flue gas cleaning chemistry

    Energy Technology Data Exchange (ETDEWEB)

    Gutberlet, H. [VEBA Kraftwerke Ruhr AG, Gelsenkirchen (Germany)

    1996-12-01

    The introduction of modern flue gas cleaning technology into fossil-fueled power stations has repeatedly confronted the power station chemists with new and interesting problems over the last 15 - 20 years. Both flue gas desulphurization by lime washing and catalytic removal of nitrogen oxides are based on simple basic chemical reactions. Owing to the use of readily available starting materials, the production of safe, useful end products and, last but not least, the possibility of implementing all this on an industrial scale by means of efficient process engineering, limestone desulphurization and catalytic removal of nitrogen oxides dominate the world market and, little by little, are becoming still more widespread. The origin and thus the quality of fuels and starting materials, the firing method, the mode of operation and engineering peculiarities in each plant interact in a complex manner. Simple cause/effect relationships are frequently incapable of explaining phenomena; thinking in complex interrelationships is needed. (EG)

  2. Clean Salt integrated flowsheet

    International Nuclear Information System (INIS)

    The Clean Salt Process (CSP) is a novel waste management scheme that removes sodium nitrate and aluminum nitrate nonahydrate as decontaminated (low specific activity) salts from Hanford's high-level waste (HLW). The full scale process will separate the bulk of the waste that exists as sodium salts from the small portion of the waste that is by definition radioactive and dangerous. This report presents initial conceptual CSP flowsheets and demonstrates the benefit of integrating the process into the Tank Waste Remediation Systems (TWRS) Reference Flowsheet. Total HLW and low-level (LLW) volumes are reported for two different CSP integration options and are compared to the TWRS Reference Flowsheet values. The results for a single glass option eliminating LLW disposal are also reported

  3. Flue Gas Cleaning

    DEFF Research Database (Denmark)

    Fehrmann, Rasmus

    2014-01-01

    and sulfuric acid in the atmosphere causing precipitation of acid rain resulting in death of forests and destruction of buildings and monuments in addition to human health problems. The most common state-of-the-art methods applied today industrially for cleaning of flue gases will be addressed, including wet...... and dry scrubbing for sulfur oxides (SO2) and catalytic removal of nitrogen oxides (NOx). There is however, a desire of increasing the energy produced in electrical power plants by firing CO2-neutral biomass/waste or biomass/waste in combination with fossil fuels. Thus, the EU reached agreement in March...... 2007 specifying that 20 % and recently in 2014 this was increased to 40 % of the energy should be produced from renewable fuels by 2020 and 2030, respectively to cut emissions of the greenhouse gas CO2. This, however, challenges not only the power plant itself due to enhanced slagging, fouling...

  4. Ultrasound cleaning of microfilters

    DEFF Research Database (Denmark)

    Hald, Jens; Bjørnø, Irina; Jensen, Leif Bjørnø

    1999-01-01

    The aim of the present work is to develop, design, and manufacture a high-power ultrasound transducer module to be used for preventing the blocking of plastic-based microfilters by organic materials, and possibly to prolong the lifetime of the filters in industry using the cavitation on the surface...... suitable for cleaning of microfilters without damaging the filter structure. The filter surface was studied using an optical microscope before and after the experiment. When high-power ultrasound (max. 75 W/cm2) was applied to the surface of some microfilters, no visible damage was found, while others...... filters were damaged. The results of the laboratory experiments formed background for the final design of an ultrasound transducer module for use by foodstuff filtration plants. [This work was financed by the EU Project WAMBIO PL96-3257 (FAIR Programme).]...

  5. Clean air Hamilton

    Energy Technology Data Exchange (ETDEWEB)

    McCarry, B.E. [McMaster Univ., Hamilton, ON (Canada)

    2002-07-01

    The industrial City of Hamilton is located on Lake Ontario, downwind from the Ohio Valley. The Hamilton Air Quality Initiative (HAQI) was divided in several phases, one of which is Clean Air Hamilton. This most recent phase was described in this presentation. Two major goals of this phase were: to ensure that the City of Hamilton has the best air quality of any major urban area in Ontario, and to reduce the emissions of greenhouse gases by 20 per cent compared to the levels in 1990. There were five main objectives to this initiative, namely: (1) the identification of priority air quality issues, (2) achieving an understanding of air quality issues, (3) the identification of sources, the evaluation of impacts and the recommendation of solutions, (4) the assessment of human health, and (5) the identification of further research. The reduction of air quality impacts is progressing through the support provided to the Drive Clean Program, the discouragement of vehicle idling, the support to car pooling initiatives, and the promotion of green vehicles. The implementation of pollution control technologies is taking place on the industrial side, as well as the development of plans to reduce steel industry emissions, the development of energy conservation measures and the promotion of green building practices. Efforts are being deployed over fleet greening partnerships, community tree planting program, an international air conference, an electronic information network linking the United States and the communities of Southern Ontario, a road dust study, a truck emissions research project, the assessment of human health impacts, and finally methods for the monitoring of local improvements. figs.

  6. Programmed Cleaning and Environmental Sanitation.

    Science.gov (United States)

    Gardner, John C., Ed.

    Maintenance of sanitation in buildings, plants, offices, and institutions; the selection of cleaning materials for these purposes; and the organization and supervision of the cleaning program are becoming increasingly complex and needful of a higher cost of handling. This book describes these problems and gives helpful information and guidance for…

  7. Trading Agents

    CERN Document Server

    Wellman, Michael

    2011-01-01

    Automated trading in electronic markets is one of the most common and consequential applications of autonomous software agents. Design of effective trading strategies requires thorough understanding of how market mechanisms operate, and appreciation of strategic issues that commonly manifest in trading scenarios. Drawing on research in auction theory and artificial intelligence, this book presents core principles of strategic reasoning that apply to market situations. The author illustrates trading strategy choices through examples of concrete market environments, such as eBay, as well as abst

  8. A Note on Clean Rings

    Institute of Scientific and Technical Information of China (English)

    Zhou Wang; Jianlong Chen

    2007-01-01

    Let R be a ring and g(x) a polynomial in C[x],where C=C(R) denotes the center of R.Camillo and Sim6n called the ring g(x)-clean if every element of R can be written as the sum of a unit and a root of g(x).In this paper,we prove that for a,b (E) C,the ring R is clean and b - a is invertible in R if and only if R is g1(x)-clean,where gl(x) = (x - a)(x - b).This implies that in some sense the notion of g(x)-clean rings in the Nicholson-Zhou Theorem and in the Camillo-Sim6n Theorem is indeed equivalent to the notion of clean rings.

  9. Alternatives to Organic Solvents in Industrial Cleaning Processes

    DEFF Research Database (Denmark)

    Jacobsen, Thomas

    1998-01-01

    industry, and vehicle repair and maintenance. There are, however, other elements that influence the possibility to substitute. The requirements to the resulting surface, depending on the following treatment of the surface. The character of the soilings to be removed. The possible presence of other...... cleaning agents in offset printing companies instead of volatile, toxic organic solvents. The present study is based on a project with the aim of defining other industrial processes, where organic solvents used for cleaning or degreasing can be replaced by non-volatile, low-toxic products, which are based...... on esters from fatty acids of vegetable origin (vegetable esters - VE).The study indicates that industrial cleaning/degreasing with organic solvents may be substituted with VEs on metal surfaces and on some coated surfaces, in manufacture of paints and inks, use of paints, use of inks (printing), metal...

  10. Clean Metal Casting

    Energy Technology Data Exchange (ETDEWEB)

    Makhlouf M. Makhlouf; Diran Apelian

    2002-02-05

    The objective of this project is to develop a technology for clean metal processing that is capable of consistently providing a metal cleanliness level that is fit for a given application. The program has five tasks: Development of melt cleanliness assessment technology, development of melt contamination avoidance technology, development of high temperature phase separation technology, establishment of a correlation between the level of melt cleanliness and as cast mechanical properties, and transfer of technology to the industrial sector. Within the context of the first task, WPI has developed a standardized Reduced Pressure Test that has been endorsed by AFS as a recommended practice. In addition, within the context of task1, WPI has developed a melt cleanliness sensor based on the principles of electromagnetic separation. An industrial partner is commercializing the sensor. Within the context of the second task, WPI has developed environmentally friendly fluxes that do not contain fluorine. Within the context of the third task, WPI modeled the process of rotary degassing and verified the model predictions with experimental data. This model may be used to optimize the performance of industrial rotary degassers. Within the context of the fourth task, WPI has correlated the level of melt cleanliness at various foundries, including a sand casting foundry, a permanent mold casting foundry, and a die casting foundry, to the casting process and the resultant mechanical properties. This is useful in tailoring the melt cleansing operations at foundries to the particular casting process and the desired properties of cast components.

  11. Canada's Clean Air Act

    International Nuclear Information System (INIS)

    This paper provided an outline of Canada's Clean Air Act and examined some of the regulatory changes that will occur as a result of its implementation. The Act is being introduced to strengthen the legislative basis for taking action on reducing air pollution and GHGs, and will allow the government to regulate both indoor and outdoor air pollutants and GHGs. The Act will require the Ministers of the Environment and Health to establish national air quality objectives, as well as to monitor and report on their attainment. The Canadian Environmental Protection Act will be amended to enable the government to regulate the blending of fuels and their components. The Motor Vehicle Fuel Consumption Standards Act will also be amended to enhance the government's authority to regulate vehicle fuel efficiency. The Energy Efficiency Act will also be expanded to allow the government to set energy efficiency standards and labelling requirements for a wider range of consumer and commercial products. The Act will commit to short, medium and long-term industrial air pollution targets. Regulations will be proposed for emissions from industry; on-road and off-road vehicles and engines; and consumer and commercial products. It was concluded that the Government of Canada will continue to consult with provinces, territories, industries and Canadians to set and reach targets for the reduction of both indoor and outdoor air pollutants and GHG emissions. 6 figs

  12. Clean tracks for ATLAS

    CERN Multimedia

    2006-01-01

    First cosmic ray tracks in the integrated ATLAS barrel SCT and TRT tracking detectors. A snap-shot of a cosmic ray event seen in the different layers of both the SCT and TRT detectors. The ATLAS Inner Detector Integration Team celebrated a major success recently, when clean tracks of cosmic rays were detected in the completed semiconductor tracker (SCT) and transition radiation tracker (TRT) barrels. These tracking tests come just months after the successful insertion of the SCT into the TRT (See Bulletin 09/2006). The cosmic ray test is important for the experiment because, after 15 years of hard work, it is the last test performed on the fully assembled barrel before lowering it into the ATLAS cavern. The two trackers work together to provide millions of channels so that particles' tracks can be identified and measured with great accuracy. According to the team, the preliminary results were very encouraging. After first checks of noise levels in the final detectors, a critical goal was to study their re...

  13. Degreasing and cleaning superconducting RF Niobium cavities

    Energy Technology Data Exchange (ETDEWEB)

    Rauchmiller, Michael; Kellett, Ron; /Fermilab

    2011-09-01

    The purpose and scope of this report is to detail the steps necessary for degreasing and cleaning of superconducting RF Niobium cavities in the A0 clean room. It lists the required equipment and the cleaning procedure.

  14. Radioprotective Agents

    Directory of Open Access Journals (Sweden)

    Ilker Kelle

    2008-01-01

    Full Text Available Since1949, a great deal of research has been carried out on the radioprotective activity of various chemical substances. Thiol compounds, compounds which contain –SH radical, different classes of pharmacological agents and other compounds such as vitamine C and WR-2721 have been shown to reduce mortality when administered prior to exposure to a lethal dose of radiation. Recently, honey bee venom as well as that of its components melittin and histamine have shown to be valuable in reduction of radiation-induced damage and also provide prophylactic alternative treatment for serious side effects related with radiotherapy. It has been suggested that the radioprotective activity of bee venom components is related with the stimulation of the hematopoetic system.

  15. Precision Cleaning - Path to Premier

    Science.gov (United States)

    Mackler, Scott E.

    2008-01-01

    ITT Space Systems Division s new Precision Cleaning facility provides critical cleaning and packaging of aerospace flight hardware and optical payloads to meet customer performance requirements. The Precision Cleaning Path to Premier Project was a 2007 capital project and is a key element in the approved Premier Resource Management - Integrated Supply Chain Footprint Optimization Project. Formerly precision cleaning was located offsite in a leased building. A new facility equipped with modern precision cleaning equipment including advanced process analytical technology and improved capabilities was designed and built after outsourcing solutions were investigated and found lacking in ability to meet quality specifications and schedule needs. SSD cleans parts that can range in size from a single threaded fastener all the way up to large composite structures. Materials that can be processed include optics, composites, metals and various high performance coatings. We are required to provide verification to our customers that we have met their particulate and molecular cleanliness requirements and we have that analytical capability in this new facility. The new facility footprint is approximately half the size of the former leased operation and provides double the amount of throughput. Process improvements and new cleaning equipment are projected to increase 1st pass yield from 78% to 98% avoiding $300K+/yr in rework costs. Cost avoidance of $350K/yr will result from elimination of rent, IT services, transportation, and decreased utility costs. Savings due to reduced staff expected to net $4-500K/yr.

  16. Basics about online boiler cleaning according to the Schwandorf principle; Grundlagen zur Online-Kesselreinigung nach dem Schwandorfer Prinzip

    Energy Technology Data Exchange (ETDEWEB)

    Krueger, Joerg [VWT Ing.-Buero, Schwandorf (Germany); Krueger, Sascha [IBK-Verfahrenstechnik, Bad Berka (Germany)

    2013-10-01

    In the Schwandorf waste-to-energy (WtE) plant more than ten years ago a wet online boiler cleaning system was developed which has the capability to clean the radiation passes of (WtE-, biomass- and refuse derived fuel (RDF)) boilers without damaging the boiler. During the development it was recognised that the method of atomising the washing agent (water) is highly influencing the effectiveness of cleaning by securing parts of the boiler (membrane walls). (orig.)

  17. CLEAN Technique for Polarimetric ISAR

    Directory of Open Access Journals (Sweden)

    M. Martorella

    2008-01-01

    Full Text Available Inverse synthetic aperture radar (ISAR images are often used for classifying and recognising targets. To reduce the amount of data processed by the classifier, scattering centres are extracted from the ISAR image and used for classifying and recognising targets. This paper addresses the problem of estimating the position and the scattering vector of target scattering centres from polarimetric ISAR images. The proposed technique is obtained by extending the CLEAN technique, which was introduced in radar imaging for extracting scattering centres from single-polarisation ISAR images. The effectiveness of the proposed algorithm, namely, the Polarimetric CLEAN (Pol-CLEAN is tested on simulated and real data.

  18. ECOLOGICAL CLEANING SYSTEMS FOR OLD ICONS PAINTED IN TEMPERA

    OpenAIRE

    Silvea Pruteanu; Petronela Spiridon; Viorica Vasilache; Ion Sandu

    2014-01-01

    Old icons, especially those involved in liturgical rituals are affected in time by external agents factors (temperature, humidity, light, pollution, microbiological attack, abrasion etc.), resulting changes of the appearance and of the structural integrity, dirt deposits, altered varnish and painting layer, cracks, material loss etc. In order to remove the dirt deposits, there are used cleaning systems with dry wiping, vacuuming, scraping, washing with organic solvents, ion exchange solutions...

  19. An agent framework for dynamic agent retraining: Agent academy

    OpenAIRE

    Mitkas, P.; A. Symeonidis; Kechagias, D.; Athanasiadis, I.N.; Laleci, G.; KURT, G.; Kabak, Y.; Acar, A.; Dogac, A.

    2004-01-01

    Agent Academy (AA) aims to develop a multi-agent society that can train new agents for specific or general tasks, while constantly retraining existing agents in a recursive mode. The system is based on collecting information both from the environment and the behaviors of the acting agents and their related successes/failures to generate a body of data, stored in the Agent Use Repository, which is mined by the Data Miner module, in order to generate useful knowledge about the application domai...

  20. The effect of copper pre-cleaning on graphene synthesis

    International Nuclear Information System (INIS)

    Copper foil is the most common substrate to synthesize monolayer graphene by chemical vapor deposition (CVD). The surface morphology and conditions of the copper foil can be very different depending on the various suppliers or different batches. These surface properties of copper strongly affect the growth behavior of graphene, thus rendering the growth conditions irreproducible when different batches of Cu foil are used. Furthermore, the quality of the graphene is severely affected as well. In this work, we report a facile method of copper pre-cleaning to improve the graphene quality and the reproducibility of the growth process. We found that the commercial Ni etchant (based on nitric acid) or nitric acid is the most effective cleaning agent among various acidic or basic solutions. The graphene grown on thus-treated copper surfaces is very clean and mostly monolayer when observed under scanning electron microscopy (SEM) and optical imaging, as compared to the graphene grown on untreated copper foil. Different batches (but with the same catalog number) of copper foil from Alfa Aesar Company were examined to explore the effect of copper pre-cleaning; consistent growth results were obtained when pre-cleaning was used. This method overcomes a commonly encountered problem in graphene growth and could become one of the standard protocols for preparing the copper foil substrate for growing graphene or other 2D materials. (paper)

  1. Tracking Clean Energy Progress 2013

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2013-06-01

    Tracking Clean Energy Progress 2013 (TCEP 2013) examines progress in the development and deployment of key clean energy technologies. Each technology and sector is tracked against interim 2020 targets in the IEA Energy Technology Perspectives 2012 2°C scenario, which lays out pathways to a sustainable energy system in 2050. Stark message emerge: progress has not been fast enough; large market failures are preventing clean energy solutions from being taken up; considerable energy efficiency remains untapped; policies need to better address the energy system as a whole; and energy-related research, development and demonstration need to accelerate. Alongside these grim conclusions there is positive news. In 2012, hybrid-electric vehicle sales passed the 1 million mark. Solar photovoltaic systems were being installed at a record pace. The costs of most clean energy technologies fell more rapidly than anticipated.

  2. Hansen Cleaning Solvent Research Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Environmental regulation will force current baseline  precision cleaning solvent (AK-225) to be phased out starting 2015. We plan to develop  a new...

  3. First cleaning with LHC collimators

    CERN Document Server

    Wollmann, D; Arnau-Izquiedo, G; Assmann, R; Bacher, J P; Baglin, V; Bellodi, G; Bertarelli, A; Bouzoud, A; Bracco, C; Bruce, R; Brugger, M; Calatroni, S; Cerruti, F; Chamizo, R; Cherif, A; Chiaveri, E; Chiggiato, P; Dallochio, A; Dehning, B; Donze, M; Ferrari, A; Folch, R; Francon, P; Gander, P; Geisser, J M; Grudiev, A; Holzer, EB; Jacquet, D; Jeanneret, J B; Jimenez, J M; Jonker, M; Jowett, J; Kershaw, K; Lari, L; Lendaro, J; Loprete, F; Losito, R; Magistris, M; Malabaila, M; Mayer, M; Marsili, A; Masi, A; Mathot, S; Métral, E; Mitifiot, C; Mounet, N; de Morais Amaral, R; Nordt, A; Perret, R; Perrollaz, S; Rathjen, C; Redaelli, S; Robert-Demolaize, G; Roesler, S; Rossi, A; Salvant, B; Santana, M; Sexton, I; Sievers, P; Tardy, T; Timmins, M; Tsoulou, K; Veyrunes, E; Vincke, H; Vlachoudis, V; Vuillemin, V; Weiler, T; Zimmermann, F; Baishev, I; Kurochkin, I; Kaltchev, D; Caspers, F; Kadi, Y

    2010-01-01

    The LHC has two dedicated cleaning insertions: IR3 for momentum cleaning and IR7 for betatron cleaning. The collimation system has been specified and built with tight mechanical tolerances (e.g. jaw flatness ~ 40 μm ) and is designed to achieve a high accuracy and reproducibility of the jaw positions (~ 20 μm). The practically achievable cleaning efficiency of the present Phase-I system depends on the precision of the jaw centering around the beam, the accuracy of the gap size and the jaw parallelism against the beam. The reproducibility and stability of the collimation system is important to avoid the frequent repetition of beam based alignment which is currently a lengthy procedure. Within this paper we describe the method used for the beam based alignment of the LHC collimation system, its achieved accuracy and stability and its performance at 450GeV.

  4. Ultrasonic cleaning of root canals

    Science.gov (United States)

    Verhaagen, Bram; Boutsioukis, Christos; Jiang, Lei-Meng; Macedo, Ricardo; van der Sluis, Luc; Versluis, Michel

    2011-11-01

    A crucial step during a dental root canal treatment is irrigation, where an antimicrobial fluid is injected into the root canal system to eradicate all bacteria. Agitation of the fluid using an ultrasonically vibrating miniature file has shown significant improvement in cleaning efficacy over conventional syringe irrigation. However, the physical mechanisms underlying the cleaning process, being acoustic streaming, cavitation or chemical activity, and combinations thereof, are not fully understood. High-speed imaging allows us to visualize the flow pattern and cavitation in a root canal model at microscopic scales, at timescales relevant to the cleaning processes (microseconds). MicroPIV measurements of the induced acoustic streaming are coupled to the oscillation characteristics of the file as simulated numerically and measured with a laser vibrometer. The results give new insight into the role of acoustic streaming and the importance of the confinement for the cleaning of root canals.

  5. Efficient methods of piping cleaning

    OpenAIRE

    Orlov Vladimir Aleksandrovich; Nechitaeva Valentina Anatol'evna; Bogomolova Irina Olegovna; Shaykhetdinova Yuliya Aleksandrovna; Daminova Yuliya Farikhovna

    2014-01-01

    The article contains the analysis of the efficient methods of piping cleaning of water supply and sanitation systems. Special attention is paid to the ice cleaning method, in course of which biological foil and various mineral and organic deposits are removed due to the ice crust buildup on the inner surface of water supply and drainage pipes. These impurities are responsible for the deterioration of the organoleptic properties of the transported drinking water or narrowing cross-section of d...

  6. Advanced cleaning by mass finishing

    Science.gov (United States)

    McCoy, M. W.

    1983-10-01

    The effectiveness of vibratory finishing for removing a variety of radioactively contaminated soils was investigated by measuring the radiation levels of the test material, the lining of the vibratory finishing tub, and the media. Many soils including corrosion products, scale, oil, grease and paint were removed from steels, aluminum, polyvinyl chloride, plexiglass, glass and flexible materials such as rubber. Zinc, copper, and lead were not cleaned. Results indicate that vibratory finishing should be an effective cleaning process or a variety of manufacturing operations.

  7. Cleaning services in local authorities

    OpenAIRE

    Klungseth, Nora Johanne

    2015-01-01

    This thesis discusses cleaning services in local authorities and is a response to calls for new knowledge on public facility management (FM). The research was financed by the Norwegian Ministry of Local Government and Regional Development (KRD). The aim is to describe and explore cleaning in order to provide new knowledge which may contribute to developing and improving FM in local authorities. The research undertaken was based on a descriptive and exploratory mixed-method approach consisting...

  8. Clean Energy Solutions Center (Presentation)

    Energy Technology Data Exchange (ETDEWEB)

    Reategui, S.

    2012-07-01

    The Clean Energy Ministerial launched the Clean Energy Solutions Center in April, 2011 for major economy countries, led by Australia and U.S. with other CEM partners. Partnership with UN-Energy is extending scope to support all developing countries: 1. Enhance resources on policies relating to energy access, small to medium enterprises (SMEs), and financing programs; 2. Offer expert policy assistance to all countries; 3. Expand peer to peer learning, training, and deployment and policy data for developing countries.

  9. Hyperbolic Divergence Cleaning for SPH

    OpenAIRE

    Tricco, Terrence S.; Price, Daniel J.

    2012-01-01

    We present SPH formulations of Dedner et al's hyperbolic/parabolic divergence cleaning scheme for magnetic and velocity fields. Our implementation preserves the conservation properties of SPH which is important for stability. This is achieved by deriving an energy term for the Psi field, and imposing energy conservation on the cleaning subsystem of equations. This necessitates use of conjugate operators for divB and gradPsi in the numerical equations. For both the magnetic and velocity fields...

  10. 2012 Clean Energy: Project Summaries

    OpenAIRE

    Asian Development Bank

    2013-01-01

    This report summarizes the investments in clean energy made by the operations departments of the Asian Development Bank (ADB) in 2012, condensing information from project databases and formal reports in an easy-to-reference format. This report was prepared by ADB’s Clean Energy Program which provides the cohesive agenda that encompasses and guides ADB’s lending and non-lending assistance, initiatives, and plan of action for sustainable growth in Asia and the Pacific.

  11. Automated carbon dioxide cleaning system

    Science.gov (United States)

    Hoppe, David T.

    1991-01-01

    Solidified CO2 pellets are an effective blast media for the cleaning of a variety of materials. CO2 is obtained from the waste gas streams generated from other manufacturing processes and therefore does not contribute to the greenhouse effect, depletion of the ozone layer, or the environmental burden of hazardous waste disposal. The system is capable of removing as much as 90 percent of the contamination from a surface in one pass or to a high cleanliness level after multiple passes. Although the system is packaged and designed for manual hand held cleaning processes, the nozzle can easily be attached to the end effector of a robot for automated cleaning of predefined and known geometries. Specific tailoring of cleaning parameters are required to optimize the process for each individual geometry. Using optimum cleaning parameters the CO2 systems were shown to be capable of cleaning to molecular levels below 0.7 mg/sq ft. The systems were effective for removing a variety of contaminants such as lubricating oils, cutting oils, grease, alcohol residue, biological films, and silicone. The system was effective on steel, aluminum, and carbon phenolic substrates.

  12. Clean Energy Application Center

    Energy Technology Data Exchange (ETDEWEB)

    Freihaut, Jim

    2013-09-30

    The Mid Atlantic Clean Energy Application Center (MACEAC), managed by The Penn State College of Engineering, serves the six states in the Mid-Atlantic region (Pennsylvania, New Jersey, Delaware, Maryland, Virginia and West Virginia) plus the District of Columbia. The goals of the Mid-Atlantic CEAC are to promote the adoption of Combined Heat and Power (CHP), Waste Heat Recovery (WHR) and District Energy Systems (DES) in the Mid Atlantic area through education and technical support to more than 1,200 regional industry and government representatives in the region. The successful promotion of these technologies by the MACEAC was accomplished through the following efforts; (1)The MACEAC developed a series of technology transfer networks with State energy and environmental offices, Association of Energy Engineers local chapters, local community development organizations, utilities and, Penn State Department of Architectural Engineering alumni and their firms to effectively educate local practitioners about the energy utilization, environmental and economic advantages of CHP, WHR and DES; (2) Completed assessments of the regional technical and market potential for CHP, WHR and DE technologies application in the context of state specific energy prices, state energy and efficiency portfolio development. The studies were completed for Pennsylvania, New Jersey and Maryland and included a set of incentive adoption probability models used as a to guide during implementation discussions with State energy policy makers; (3) Using the technical and market assessments and adoption incentive models, the Mid Atlantic CEAC developed regional strategic action plans for the promotion of CHP Application technology for Pennsylvania, New Jersey and Maryland; (4) The CHP market assessment and incentive adoption model information was discussed, on a continuing basis, with relevant state agencies, policy makers and Public Utility Commission organizations resulting in CHP favorable incentive

  13. Mechanisms of single bubble cleaning.

    Science.gov (United States)

    Reuter, Fabian; Mettin, Robert

    2016-03-01

    The dynamics of collapsing bubbles close to a flat solid is investigated with respect to its potential for removal of surface attached particles. Individual bubbles are created by nanosecond Nd:YAG laser pulses focused into water close to glass plates contaminated with melamine resin micro-particles. The bubble dynamics is analysed by means of synchronous high-speed recordings. Due to the close solid boundary, the bubble collapses with the well-known liquid jet phenomenon. Subsequent microscopic inspection of the substrates reveals circular areas clean of particles after a single bubble generation and collapse event. The detailed bubble dynamics, as well as the cleaned area size, is characterised by the non-dimensional bubble stand-off γ=d/Rmax, with d: laser focus distance to the solid boundary, and Rmax: maximum bubble radius before collapse. We observe a maximum of clean area at γ≈0.7, a roughly linear decay of the cleaned circle radius for increasing γ, and no cleaning for γ>3.5. As the main mechanism for particle removal, rapid flows at the boundary are identified. Three different cleaning regimes are discussed in relation to γ: (I) For large stand-off, 1.8substrate and remove particles without significant contact of the gas phase. (II) For small distances, γsubstrate are driven by the jet impact with its subsequent radial spreading, and by the liquid following the motion of the collapsing and rebounding bubble wall. Both flows remove particles. Their relative timing, which depends sensitively on the exact γ, appears to determine the extension of the area with forces large enough to cause particle detachment. (III) At intermediate stand-off, 1.1substrate, but acts with cleaning mechanisms similar to an effective small γ collapse: particles are removed by the jet flow and the flow induced by the bubble wall oscillation. Furthermore, the observations reveal that the extent of direct bubble gas phase contact to the solid is partially smaller than the

  14. High throughput determination of cleaning solutions to prevent the fouling of an anion exchange resin.

    Science.gov (United States)

    Elich, Thomas; Iskra, Timothy; Daniels, William; Morrison, Christopher J

    2016-06-01

    Effective cleaning of chromatography resin is required to prevent fouling and maximize the number of processing cycles which can be achieved. Optimization of resin cleaning procedures, however, can lead to prohibitive material, labor, and time requirements, even when using milliliter scale chromatography columns. In this work, high throughput (HT) techniques were used to evaluate cleaning agents for a monoclonal antibody (mAb) polishing step utilizing Fractogel(®) EMD TMAE HiCap (M) anion exchange (AEX) resin. For this particular mAb feed stream, the AEX resin could not be fully restored with traditional NaCl and NaOH cleaning solutions, resulting in a loss of impurity capacity with resin cycling. Miniaturized microliter scale chromatography columns and an automated liquid handling system (LHS) were employed to evaluate various experimental cleaning conditions. Cleaning agents were monitored for their ability to maintain resin impurity capacity over multiple processing cycles by analyzing the flowthrough material for turbidity and high molecular weight (HMW) content. HT experiments indicated that a 167 mM acetic acid strip solution followed by a 0.5 M NaOH, 2 M NaCl sanitization provided approximately 90% cleaning improvement over solutions containing solely NaCl and/or NaOH. Results from the microliter scale HT experiments were confirmed in subsequent evaluations at the milliliter scale. These results identify cleaning agents which may restore resin performance for applications involving fouling species in ion exchange systems. In addition, this work demonstrates the use of miniaturized columns operated with an automated LHS for HT evaluation of chromatographic cleaning procedures, effectively decreasing material requirements while simultaneously increasing throughput. Biotechnol. Bioeng. 2016;113: 1251-1259. © 2015 Wiley Periodicals, Inc. PMID:26552005

  15. A method and device for cleaning air

    DEFF Research Database (Denmark)

    2009-01-01

    The present invention relates to a method and device for cleaning pollution from air wherin the air to be cleaned is subjected to a sequence of physical and chemical treatments.......The present invention relates to a method and device for cleaning pollution from air wherin the air to be cleaned is subjected to a sequence of physical and chemical treatments....

  16. A novel cleaner for colloidal silica abrasive removal in post-Cu CMP cleaning

    International Nuclear Information System (INIS)

    A novel cleaning solution, named FA/O alkaline cleaner, was proposed and demonstrated in the removal of colloidal silica abrasives. In order to remove both the chemical and physical absorbed colloidal silica abrasives, an FA/OII chelating agent and non-ionic surfactant were added into the cleaner. By varying the concentration of chelating agent and non-ionic surfactant, a series of experiments were performed to determine the best cleaning results. This paper discusses the mechanism of the removal of colloidal silica abrasives with a FA/O alkaline cleaner. Based on the experiment results, it is concluded that both the FA/OII chelating and non-ionic surfactant could benefit the removal of colloidal silica abrasives. When the concentration of FA/OII chelating agent and FA/O non-ionic surfactant reached the optima value, it was demonstrated that silica abrasives could be removed efficiently by this novel cleaning solution. (paper)

  17. Cleaning efficacy of hydroxypropyl-beta-cyclodextrin for biofouling reduction on reverse osmosis membranes.

    Science.gov (United States)

    Alayande, Abayomi Babatunde; Kim, Lan Hee; Kim, In S

    2016-01-01

    In this study, an environmentally friendly compound, hydroxypropyl-beta-cyclodextrin (HP-β-CD) was applied to clean reverse osmosis (RO) membranes fouled by microorganisms. The cleaning with HP-β-CD removed the biofilm and resulted in a flux recovery ratio (FRR) of 102%. As cleaning efficiency is sometimes difficult to determine using flux recovery data alone, attached bacterial cells and extracellular polymeric substances (EPS) were quantified after cleaning the biofouled membrane with HP-β-CD. Membrane surface characterization using scanning electron microscopy (SEM), attenuated total reflectance Fourier transform infrared (ATR-FTIR) and atomic force microscopy (AFM) confirmed the effectiveness of HP-β-CD in removal of biofilm from the RO membrane surface. Finally, a comparative study was performed to investigate the competitiveness of HP-β-CD with other known cleaning agents such as sodium dodecyl sulfate (SDS), ethylenediaminetetraacetic acid (EDTA), Tween 20, rhamnolipid, nisin, and surfactin. In all cases, HP-β-CD was superior.

  18. Are Breast Surgical Operations Clean or Clean Contaminated?

    Science.gov (United States)

    Kataria, Kamal; Bagdia, Amit; Srivastava, Anurag

    2015-12-01

    The breast surgeries are classically taught as clean surgical procedures. The infection rates following breast surgery ranges from 3 to 15 %, which is much higher than infection rates after clean surgery (ranging from 1.5 to 3 %). This high infection rate following breast surgery can be explained by opening of the ductal system to outside world through nipple similar to the gastrointestinal and genitourinary system. We conducted a systematic review of infection following breast surgeries. We searched various randomized controlled trials, meta-analysis, and Cochrane Reviews over PubMed and Medline via the Internet. These evidences were found to support the thesis, "Breast surgeries need to be reclassified as clean-contaminated". We recommend the use of prophylactic antibiotics in breast surgery.

  19. Efficiancy of hydrogen peroxide for cleaning production areas and equipments in the radiopharmaceutical production

    Energy Technology Data Exchange (ETDEWEB)

    Baptista, Tatyana S.; Batista, Vanessa; Gomes, Antonio; Matsuda, Margareth; Fukumori, Neuza; Araujo, Elaine B. de, E-mail: tsbaptista@ipen.br [Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN-SP), Sao Paulo, SP (Brazil)

    2013-07-01

    A great challenge in the radiopharmaceuticals production is to fulfill the Good Manufacturing Practices (GMPs), involving the validation of process and of all supporting activities such as cleaning and sanitization. The increasingly strict requirements for quality assurance system, with several norms and normative resolutions has led to a constant concern with programs and cleaning validation in pharmaceutical production. The main goal of GMP is to reduce risks inherent to pharmaceutical production, that is to reduce product contamination with microorganisms and cross-contamination. The basic requirements to prevent contamination is the development and implementation of efficient cleaning programs. In the case of clean rooms for the production of injectable radiopharmaceuticals, the requirement for cleaning programs is evidently higher due to the characteristics of these areas with hot cells for radioactive materials, where sterile radiopharmaceuticals are manipulated and distributed before administration to patients just after minutes or hours of its preparation. In the Radiopharmacy Department at IPEN it was established a cleaning program for clean rooms and hot cells using a hydrogen peroxide solution (20% proxitane alfa). The objective of this work was to assess effectiveness of this cleaning agent in reducing and/or eliminating microbial load in the clean rooms and equipment to acceptable levels in accordance with the current legislation. The analysis was conducted using results of the environmental monitoring program with and settling contact plates in clean rooms after the cleaning procedures. Furthermore, it was possible to evaluate the action of the sanitizing agent on the microbial population on the surface of equipment and clean rooms. It was also evaluated the best way to accomplish the cleaning program considering the dosimetric factor in each production process, as the main concern of pharmaceutical companies is the microbiological contamination, in

  20. Efficiancy of hydrogen peroxide for cleaning production areas and equipments in the radiopharmaceutical production

    International Nuclear Information System (INIS)

    A great challenge in the radiopharmaceuticals production is to fulfill the Good Manufacturing Practices (GMPs), involving the validation of process and of all supporting activities such as cleaning and sanitization. The increasingly strict requirements for quality assurance system, with several norms and normative resolutions has led to a constant concern with programs and cleaning validation in pharmaceutical production. The main goal of GMP is to reduce risks inherent to pharmaceutical production, that is to reduce product contamination with microorganisms and cross-contamination. The basic requirements to prevent contamination is the development and implementation of efficient cleaning programs. In the case of clean rooms for the production of injectable radiopharmaceuticals, the requirement for cleaning programs is evidently higher due to the characteristics of these areas with hot cells for radioactive materials, where sterile radiopharmaceuticals are manipulated and distributed before administration to patients just after minutes or hours of its preparation. In the Radiopharmacy Department at IPEN it was established a cleaning program for clean rooms and hot cells using a hydrogen peroxide solution (20% proxitane alfa). The objective of this work was to assess effectiveness of this cleaning agent in reducing and/or eliminating microbial load in the clean rooms and equipment to acceptable levels in accordance with the current legislation. The analysis was conducted using results of the environmental monitoring program with and settling contact plates in clean rooms after the cleaning procedures. Furthermore, it was possible to evaluate the action of the sanitizing agent on the microbial population on the surface of equipment and clean rooms. It was also evaluated the best way to accomplish the cleaning program considering the dosimetric factor in each production process, as the main concern of pharmaceutical companies is the microbiological contamination, in

  1. Treatment and disposal of steam generator and heat exchanger chemical cleaning wastes

    International Nuclear Information System (INIS)

    Wet air oxidation was effective in reducing the organic loading of Ontario Hydro's EDTA-based steam generator cleaning wastes and the organic acid formulation used for heat exchanger chemical cleaning. Destruction of the complexing agents resulted in direct precipitation of iron from the waste steam generator magnetite solvent and from the heat exchanger cleaning waste. The oxidized liquors contain lower molecular weight organic acids, ammonia and amines, suitable for secondary biological treatment. The oxidized copper waste requires further treatment to reduce dissolved copper levels prior to biological digestion. A preliminary evaluation of UV and ozone degradation of these wastes showed less promise than wet air oxidation. 24 refs., 1 fig., 4 tabs

  2. An evaluation of proximal surface cleansing agents.

    Science.gov (United States)

    Wolffe, G N

    1976-08-01

    The effectiveness of the Interspace brush, Inter-Dens, and waxed dental floss as proximal surface cleansing agents was compared in 35 subjects. Each subject used all three methods of cleansing in random order of selection. Statistical analysis of the results showed that there was no difference in the effectiveness of any one of these three agents. However, proximal surfaces of anterior teeth where cleaned more effectively than posterior teeth. The coronal half of the proximal surfaces was cleaned more effectively than the apical half and the facial half more effectively than the lingual half when Inter-Dens was used. Comparison of cleansing effectiveness between facial and lingual halves of proximal surfaces for the Interspace brush and waxed dental floss showed no significant difference. Mesial and distal proximal surfaces were cleaned with similar effectiveness. Plaque control was only satisfactory on approximately half of the proximal surfaces, though a wide variation occurred. Significantly lower plaque scores were found 1 week after the initial instruction session, irrespective of the agent used. The majority of subjects preferred Inter-Dens whilst waxed dental floss was the least-liked method of cleansing. PMID:1067276

  3. Cleaning properties of dry adhesives

    Institute of Scientific and Technical Information of China (English)

    J.; P.; DíAZ; TéLLEZ; D.; SAMEOTO; C.; MENON

    2010-01-01

    In this paper we present a study into the cleaning properties of synthetic dry adhesives. We have manufactured the adhesive micro-fibres through a low-cost, high yield fabrication method using Sylgard 184 Polydimethylsiloxane (PDMS) as the structural material. We deliberately contaminated the adhesive samples with different sized particles in the micro and macro scales and tested different cleaning methods for their efficacy with respect to each particle size. We investigated different cleaning methods, which included the use of wax moulding, vibration and pressure sensitive adhesives. For adhesion testing we used a custom system with a linear stage and a force sensor indenting a hemispherical probe into the adhesive surface and measuring the pull-off force. To characterize the cleaning efficacy we visually inspected each sample in a microscope and weighed the samples with a microgram-accuracy analytical balance. Results showed that the moulding method induced adhesion recovery in a greater percentage than the other cleaning methods and even helped with the recovery of collapsed posts in some cases. On the other hand pressure sensitive adhesives seem to have the upper hand with regards to certain particle sizes that can potentially pose problems with the moulding method.

  4. Guideline implementation: surgical instrument cleaning.

    Science.gov (United States)

    Cowperthwaite, Liz; Holm, Rebecca L

    2015-05-01

    Cleaning, decontaminating, and handling instructions for instruments vary widely based on the type of instrument and the manufacturer. Processing instruments in accordance with the manufacturer's instructions can help prevent damage and keep devices in good working order. Most importantly, proper cleaning and disinfection may prevent transmission of pathogenic organisms from a contaminated device to a patient or health care worker. The updated AORN "Guideline for cleaning and care of surgical instruments" provides guidance on cleaning, decontaminating, transporting, inspecting, and storing instruments. This article focuses on key points of the guideline to help perioperative personnel implement appropriate instrument care protocols in their practice settings. The key points address timely cleaning and decontamination of instruments after use; appropriate heating, ventilation, and air conditioning parameters for the decontamination area; processing of ophthalmic instruments and laryngoscopes; and precautions to take with instruments used in cases of suspected prion disease. Perioperative RNs should review the complete guideline for additional information and for guidance when writing and updating policies and procedures. PMID:25946180

  5. Optimization of Ultrasonic Fabric Cleaning

    Energy Technology Data Exchange (ETDEWEB)

    Hand, T.E.

    1998-05-13

    The fundamental purpose of this project was to research and develop a process that would reduce the cost and improve the environmental efficiency of the present dry-cleaning industry. This second phase of research (see report KCP-94-1006 for information gathered during the first phase) was intended to allow the optimal integration of all factors of ultrasonic fabric cleaning. For this phase, Garment Care performed an extensive literature search and gathered data from other researchers worldwide. The Garment Care-AlliedSignal team developed the requirements for a prototype cleaning tank for studies and acquired that tank and the additional equipment required to use it properly. Garment Care and AlliedSignal acquired the transducers and generators from Surftran Martin-Walter in Sterling Heights, Michigan. Amway's Kelly Haley developed the test protocol, supplied hundreds of test swatches, gathered the data on the swatches before and after the tests, assisted with the cleaning tests, and prepared the final analysis of the results. AlliedSignal personnel, in conjunction with Amway and Garment Care staff, performed all the tests. Additional planning is under way for future testing by outside research facilities. The final results indicated repeatable performance and good results for single layered fabric swatches. Swatches that were cleaned as a ''sandwich,'' that is, three or more layers.

  6. Halide test agent replacement study

    Energy Technology Data Exchange (ETDEWEB)

    Banks, E.M.; Freeman, W.P.; Kovach, B.J. [and others

    1995-02-01

    The intended phaseout of the chlorofluorocarbons (CFCs) from commercial use required the evaluation of substitute materials for the testing for leak paths through both individual adsorbers and installed adsorbent banks. The American Society of Mechanical Engineers (ASME) Committee on Nuclear Air and Gas Treatment (CONAGT) is in charge of maintaining the standards and codes specifying adsorbent leak test methods for the nuclear safety related air cleaning systems. The currently published standards and codes cite the use of R-11, R-12 and R-112 for leak path test agents. All of these compounds are CFCs. There are other agencies and organizations (USDOE, USDOD and USNRC) also specifying testing for leak paths or in some cases for special life tests using the above compounds. The CONAGT has recently developed criteria for the suitability evaluation of substitute test agents. On the basis of these criteria, several compounds were evaluated for their acceptability as adsorbent bed leak and life test agents. The ASME CONAGT Test Agent Qualification Criteria. The test agent qualification is based on the following parameters: (1) Similar retention times on activated carbons at the same concentration levels as one of the following: R-11, R-12, R-112 or R-112a. (2) Similar lower detection limit sensitivity and precision in the concentration range of use as R-11, R-12, R-112 and R-112a. (3) Gives the same in-place leak test results as R-11, R-12, R-112, or R-112a. (4) Chemical and radiological stability under the use conditions. (5) Causes no degradation of the carbon and its impregnant or of the other NATS components under the use conditions. (6) Is listed in the USEPA Toxic Substances Control Act (TSCA) inventory for commercial use.

  7. Agent Chameleons: Virtual Agents Real Intelligence

    OpenAIRE

    O'Hare, Gregory; Duffy, Brian; Schoen-Phelan, Bianca; Martin, Alan; Bradley, John

    2003-01-01

    Agent Chameleons provides virtual agents powered by real intelligence, delivering next generation autonomic entities that can seamlessly migrate, mutate and evolve on their journey between and within physical and digital information spaces.

  8. Clean Coal Diesel Demonstration Project

    Energy Technology Data Exchange (ETDEWEB)

    Robert Wilson

    2006-10-31

    A Clean Coal Diesel project was undertaken to demonstrate a new Clean Coal Technology that offers technical, economic and environmental advantages over conventional power generating methods. This innovative technology (developed to the prototype stage in an earlier DOE project completed in 1992) enables utilization of pre-processed clean coal fuel in large-bore, medium-speed, diesel engines. The diesel engines are conventional modern engines in many respects, except they are specially fitted with hardened parts to be compatible with the traces of abrasive ash in the coal-slurry fuel. Industrial and Municipal power generating applications in the 10 to 100 megawatt size range are the target applications. There are hundreds of such reciprocating engine power-plants operating throughout the world today on natural gas and/or heavy fuel oil.

  9. Laser cleaning of tungsten ribbon

    Energy Technology Data Exchange (ETDEWEB)

    Kumar, Aniruddha, E-mail: nontee65@rediffmail.com [Advanced Fuel Fabrication Facility, Bhabha Atomic Research Centre, Tarapur, Maharashtra, 401504 (India); Sonar, V.R.; Das, D.K.; Bhatt, R.B.; Behere, P.G.; Afzal, Mohd.; Kumar, Arun [Advanced Fuel Fabrication Facility, Bhabha Atomic Research Centre, Tarapur, Maharashtra, 401504 (India); Nilaya, J.P.; Biswas, D.J. [Laser and Plasma Technology Division, Bhabha Atomic Research Centre, Trombay, 400085 (India)

    2014-07-01

    Removal of a thin oxide layer from a tungsten ribbon was achieved using the fundamental, second and third harmonic radiation from a Q- switched Nd-YAG laser. It was found that beyond the threshold, oxide removal was achieved at all wavelengths for a wide range of fluence values. The removal mechanism of the oxide layer was found to be critically dependent on both wavelength and fluence of the incident radiation and has been identified as ejection or sublimation. The un-cleaned and cleaned surfaces were analyzed by scanning electron microscopy (SEM), energy dispersive X-ray analysis (EDS) and atomic force microscopy (AFM). Laser cleaned tungsten ribbons were used in a thermal ionization mass spectrometer (TIMS) to determine isotopic composition of Neodymium atoms.

  10. Hyperbolic Divergence Cleaning for SPH

    CERN Document Server

    Tricco, Terrence S

    2012-01-01

    We present SPH formulations of Dedner et al's hyperbolic/parabolic divergence cleaning scheme for magnetic and velocity fields. Our implementation preserves the conservation properties of SPH which is important for stability. This is achieved by deriving an energy term for the Psi field, and imposing energy conservation on the cleaning subsystem of equations. This necessitates use of conjugate operators for divB and gradPsi in the numerical equations. For both the magnetic and velocity fields, the average divergence error in the system is reduced by an order of magnitude with our cleaning algorithm. Divergence errors in SPMHD are maintained to < 1%, even for realistic 3D applications with a corresponding gain in numerical stability. Density errors for an oscillating elliptic water drop using weakly compressible SPH are reduced by a factor of two.

  11. Carbon dioxide cleaning pilot project

    International Nuclear Information System (INIS)

    In 1989, radioactive-contaminated metal at the Rocky Flats Plant (RFP) was cleaned using a solvent paint stripper (Methylene chloride). One-third of the radioactive material was able to be recycled; two-thirds went to the scrap pile as low-level mixed waste. In addition, waste solvent solutions also required disposal. Not only was this an inefficient process, it was later prohibited by the Resource Conservation and Recovery Act (RCRA), 40 CFR 268. A better way of doing business was needed. In the search for a solution to this situation, it was decided to study the advantages of using a new technology - pelletized carbon dioxide cleaning. A proof of principle demonstration occurred in December 1990 to test whether such a system could clean radioactive-contaminated metal. The proof of principle demonstration was expanded in June 1992 with a pilot project. The purpose of the pilot project was three fold: (1) to clean metal so that it can satisfy free release criteria for residual radioactive contamination at the Rocky Flats Plant (RFP); (2) to compare two different carbon dioxide cleaning systems; and (3) to determine the cost-effectiveness of decontamination process in a production situation and compare the cost of shipping the metal off site for waste disposal. The pilot project was completed in August 1993. The results of the pilot project were: (1) 90% of those items which were decontaminated, successfully met the free release criteria , (2) the Alpheus Model 250 was selected to be used on plantsite and (3) the break even cost of decontaminating the metal vs shipping the contaminated material offsite for disposal was a cleaning rate of 90 pounds per hour, which was easily achieved

  12. fsclean: Faraday Synthesis CLEAN imager

    Science.gov (United States)

    Bell, M. R.; Ensslin, T. A.

    2015-06-01

    Fsclean produces 3D Faraday spectra using the Faraday synthesis method, transforming directly from multi-frequency visibility data to the Faraday depth-sky plane space. Deconvolution is accomplished using the CLEAN algorithm, and the package includes Clark and Högbom style CLEAN algorithms. Fsclean reads in MeasurementSet visibility data and produces HDF5 formatted images; it handles images and data of arbitrary size, using scratch HDF5 files as buffers for data that is not being immediately processed, and is limited only by available disk space.

  13. Chemical cleaning re-invented: clean, lean and green.

    Science.gov (United States)

    Hanson, Margaret; Vangeel, Michel

    2014-01-01

    A project undertaken in the Central Cleaning Department of Janssen, a Johnson and Johnson pharmaceutical company, demonstrates how ergonomics, environmental and industrial hygiene risks and quality concerns can be tackled simultaneously. The way equipment was cleaned was re-designed by an in-house cross-functional team to ensure a 'clean, lean and green' process. Initiatives included a new layout of the area, and new work processes and equipment to facilitate cleaning and handling items. This resulted in significant improvements: all ergonomics high risk tasks were reduced to moderate or low risk; hearing protection was no longer required; respirator requirement reduced by 67%; solvent use reduced by 73%; productivity improved, with 55% fewer operator hours required; and quality improved 40-fold. The return on investment was estimated at 3.125 years based on an investment of over €1.5 million (2008 prices). This win-win intervention allowed ergonomics, environmental, industrial hygiene, productivity and quality concerns all to be addressed. PMID:24858515

  14. Contact cleaning of polymer film solar reflectors

    Science.gov (United States)

    Sansom, Christopher; Fernández-García, Aránzazu; Sutter, Florian; Almond, Heather; King, Peter

    2016-05-01

    This paper describes the accelerated ageing of polymer film reflecting surfaces under the conditions to be found during contact cleaning of Concentrating Solar Power (CSP) collectors in the presence of dust and sand particles. In these situations, contact cleaning using brushes and water is required to clean the reflecting surfaces. Whilst suitable for glass reflectors, this paper discusses the effects of existing cleaning processes on the optical and visual properties of polymer film surfaces, and then describes the development of a more benign but effective contact cleaning process for cleaning polymer reflectors. The effects of a range of cleaning brushes are discussed, with and without the presence of water, in the presence of sand and dust particles from selected representative locations. Reflectance measurements and visual inspection shows that a soft cleaning brush with a small amount of water can clean polymer film reflecting surfaces without inflicting surface damage or reducing specular reflectance.

  15. Interacting agents in finance

    NARCIS (Netherlands)

    C. Hommes

    2008-01-01

    Interacting agents in finance represent a behavioural, agent-based approach in which financial markets are viewed as complex adaptive systems consisting of many boundedly rational agents interacting through simple heterogeneous investment strategies, constantly adapting their behaviour in response t

  16. Flux recovery of ceramic tubular membranes fouled with whey proteins: Some aspects of membrane cleaning

    Directory of Open Access Journals (Sweden)

    Popović Svetlana S.

    2008-01-01

    Full Text Available Efficiency of membrane processes is greatly affected by the flux reduction due to the deposits formation at the surface and/or in the pores of the membrane. Efficiency of membrane processes is affected by cleaning procedure applied to regenerate flux. In this work, flux recovery of ceramic tubular membranes with 50 and 200 nm pore size was investigated. The membranes were fouled with reconstituted whey solution for 1 hour. After that, the membranes were rinsed with clean water and then cleaned with sodium hydroxide solutions or formulated detergents (combination of P3 Ultrasil 67 and P3 Ultrasil 69. Flux recovery after the rinsing step was not satisfactory although fouling resistance reduction was significant so that chemical cleaning was necessary. In the case of 50 nm membrane total flux recovery was achieved after cleaning with 1.0% (w/w sodium hydroxide solution. In the case of 200 nm membrane total flux recovery was not achieved irrespective of the cleaning agent choice and concentration. Cleaning with commercial detergent was less efficient than cleaning with the sodium hydroxide solution.

  17. Partnership for a Clean Future

    Institute of Scientific and Technical Information of China (English)

    WANG HAIRONG

    2010-01-01

    @@ Having lived in China for almost three decades,Sabina Brady is a de facto China hand.Currently,she is the cxecutive director of the U.S.-China Energy Cooperation Program (ECP),a nonprofit organization that engages in market development and promotion of clean energy within the framework of China-U.S.bilateral government commitments on the environrnent and energy.

  18. Green Solvents for Precision Cleaning

    Science.gov (United States)

    Grandelli, Heather; Maloney, Phillip; DeVor, Robert; Surma, Jan; Hintze, Paul

    2013-01-01

    Aerospace machinery used in liquid oxygen (LOX) fuel systems must be precision cleaned to achieve a very low level of non-volatile residue (solvent-replacement is non-flammable, environmentally benign, non-corrosive, inexpensive, effective and evaporates completely, leaving no residue. Highlighted is a green precision cleaning process, which is contaminant removal using supercritical carbon dioxide as the environmentally benign solvent. In this process, the contaminant is dissolved in carbon dioxide, and the parts are recovered at the end of the cleaning process completely dry and ready for use. Typical contaminants of aerospace components include hydrocarbon greases, hydraulic fluids, silicone fluids and greases, fluorocarbon fluids and greases and fingerprint oil. Metallic aerospace components range from small nuts and bolts to much larger parts, such as butterfly valves 18 in diameter. A fluorinated grease, Krytox, is investigated as a model contaminant in these preliminary studies, and aluminum coupons are employed as a model aerospace component. Preliminary studies are presented in which the experimental parameters are optimized for removal of Krytox from aluminum coupons in a stirred-batch process. The experimental conditions investigated are temperature, pressure, exposure time and impeller speed. Temperatures of 308 - 423 K, pressures in the range of 8.3 - 41.4 MPa, exposure times between 5 - 60 min and impeller speeds of 0 - 1000 rpm were investigated. Preliminary results showed up to 86 cleaning efficiency with the moderate processing conditions of 323 K, 13.8 MPa, 30 min and 750 rpm.

  19. Teaming up for Clean Energy

    Institute of Scientific and Technical Information of China (English)

    2009-01-01

    On October 22, the China Institute of Strategy and Management and the U.S. Brookings Institution jointly held the China-U.S. Strategic Forum on Clean Energy Cooperation. At the opening session of the forum, Zheng Bijian, Chairman of the China Institute of Strategy and Management, gave a keynote speech. Edited excerpts follow:

  20. Laser cleaning on Roman coins

    Science.gov (United States)

    Drakaki, E.; Karydas, A. G.; Klinkenberg, B.; Kokkoris, M.; Serafetinides, A. A.; Stavrou, E.; Vlastou, R.; Zarkadas, C.

    Ancient metal objects react with moisture and environmental chemicals to form various corrosion products. Because of the unique character and high value of such objects, any cleaning procedure should guarantee minimum destructiveness. The most common treatment used is mechanical stripping, in which it is difficult to avoid surface damage when employed. Lasers are currently being tested for a wide range of conservation applications. Since they are highly controllable and can be selectively applied, lasers can be used to achieve more effective and safer cleaning of archaeological artifacts and protect their surface details. The basic criterion that motivated us to use lasers to clean Roman coins was the requirement of pulsed emission, in order to minimize heat-induced damages. In fact, the laser interaction with the coins has to be short enough, to produce a fast removal of the encrustation, avoiding heat conduction into the substrate. The cleaning effects of three lasers operating at different wavelengths, namely a TEA CO2 laser emitting at 10.6 μm, an Er:YAG laser at 2.94 μm, and a 2ω-Nd:YAG laser at 532 nm have been compared on corroded Romans coins and various atomic and nuclear techniques have also been applied to evaluate the efficiency of the applied procedure.

  1. Portable sandblaster cleans small areas

    Science.gov (United States)

    Severin, H. J.

    1966-01-01

    Portable sandblasting unit rapidly and effectively cleans localized areas on a metal surface. The unit incorporates a bellows enclosure, masking plate, sand container, and used sand accummulator connected to a vacuum system. The bellows is equipped with an inspection window and light for observation of the sanding operation.

  2. Wanted: Clean Coal Burning Technology

    Institute of Scientific and Technical Information of China (English)

    2005-01-01

    China is intent on developing clean coal burning technology, an objective it can achieve through installing desulfurization facilities at coal-burning power plants that will control SO2 emissions and environmental pollution. According to kuo Yi, deputy director general of the Department of Science and Technology of the State Environmental Protection Agency, China is a major coal-buming country:

  3. Cleaning the Diesel Engine Emissions

    DEFF Research Database (Denmark)

    Christensen, Thomas Budde

    This paper examines how technologies for cleaning of diesel emission from road vehicles can be supported by facilitating a technology push in the Danish automotive emission control industry. The European commission is at present preparing legislation for the euro 5 emission standard (to be enforced...

  4. Cleaning Validation of Fermentation Tanks

    DEFF Research Database (Denmark)

    Salo, Satu; Friis, Alan; Wirtanen, Gun

    2008-01-01

    Reliable test methods for checking cleanliness are needed to evaluate and validate the cleaning process of fermentation tanks. Pilot scale tanks were used to test the applicability of various methods for this purpose. The methods found to be suitable for validation of the clenlinees were visula...

  5. Clean Energy Infrastructure Educational Initiative

    Energy Technology Data Exchange (ETDEWEB)

    Hallinan, Kevin; Menart, James; Gilbert, Robert

    2012-08-31

    The Clean Energy Infrastructure Educational Initiative represents a collaborative effort by the University of Dayton, Wright State University and Sinclair Community College. This effort above all aimed to establish energy related programs at each of the universities while also providing outreach to the local, state-wide, and national communities. At the University of Dayton, the grant has aimed at: solidfying a newly created Master's program in Renewable and Clean Energy; helping to establish and staff a regional sustainability organization for SW Ohio. As well, as the prime grantee, the University of Dayton was responsible for insuring curricular sharing between WSU and the University of Dayton. Finally, the grant, through its support of graduate students, and through cooperation with the largest utilities in SW Ohio enabled a region-wide evaluation of over 10,000 commercial building buildings in order to identify the priority buildings in the region for energy reduction. In each, the grant has achieved success. The main focus of Wright State was to continue the development of graduate education in renewable and clean energy. Wright State has done this in a number of ways. First and foremost this was done by continuing the development of the new Renewable and Clean Energy Master's Degree program at Wright State . Development tasks included: continuing development of courses for the Renewable and Clean Energy Master's Degree, increasing the student enrollment, and increasing renewable and clean energy research work. The grant has enabled development and/or improvement of 7 courses. Collectively, the University of Dayton and WSU offer perhaps the most comprehensive list of courses in the renewable and clean energy area in the country. Because of this development, enrollment at WSU has increased from 4 students to 23. Secondly, the grant has helped to support student research aimed in the renewable and clean energy program. The grant helped to solidify

  6. Defence System of Respiratory Tract and Clearence of Inhalation Agents

    OpenAIRE

    Nesrin Ocal

    2016-01-01

    It is well known that inhaled urban air contains many particles and gases. On the other hand, the anesthetic agents used in respiratory diseases comprise pharmaceutical particles. Deposition and cleaning processes of both the inhaled foreign particles and gases from room air, and inhalation agents from respiratory tract are very important clinically. These processes are carried out by the defense mechanisms of the respiratory system. In this review, the defence system of respiratory tract and...

  7. Towards ontological foundations for agent modeling concepts using UFO

    OpenAIRE

    Guizzardi, Giancarlo; Wagner, Gerd

    2005-01-01

    Foundational ontologies provide the basic concepts upon which any domain-specific ontology is built. This paper presents a new foundational ontology, UFO, and shows how it can be used as a foundation of agent concepts and for evaluating agent-oriented modeling methods. UFO is derived from a synthesis of two other foundational ontologies, GFO/GOL and OntoClean/DOLCE. While their main areas of application are the natural sciences and linguistics/cognitive engineering, respectively, the main pur...

  8. Clean Cities Now Vol. 16.1

    Energy Technology Data Exchange (ETDEWEB)

    None

    2012-05-01

    Biannual newsletter for the U.S. Department of Energy's Clean Cities initiative. The newsletter includes feature stories on advanced vehicle deployment, idle reduction, and articles on Clean Cities coalition successes across the country.

  9. Chemical cleaning specification: few tube test model

    International Nuclear Information System (INIS)

    The specification is for the waterside chemical cleaning of the 2 1/4 Cr - 1 Mo steel steam generator tubes. It describes the reagents and conditions for post-chemical cleaning passivation of the evaporator tubes

  10. Clean Cities Now Vol. 17, No. 1

    Energy Technology Data Exchange (ETDEWEB)

    None

    2013-05-24

    Biannual newsletter for the U.S. Department of Energy's Clean Cities initiative. The newsletter includes feature stories on advanced vehicle deployment, idle reduction, and articles on Clean Cities coalition successes across the country.

  11. Clean Cities Program Contacts (Fact Sheet)

    Energy Technology Data Exchange (ETDEWEB)

    2012-03-01

    This fact sheet provides contact information for program staff of the U.S. Department of Energy's Clean Cities program, as well as contact information for the nearly 100 local Clean Cities coalitions across the country.

  12. Ultrasonic aqueous cleaning as a replacement for chlorinated solvent cleaning

    International Nuclear Information System (INIS)

    The Oak Ridge Y-12 Plant has been involved in the replacement of chlorinated solvents since 1982. One of the most successful replacement efforts has been the substitution of vapor degreasers or soak tanks using chlorinated solvents with ultrasonic cleaning using aqueous detergents. Recently, funding was obtained from the Department of Energy Office (DOE) of Technology Development to demonstrate this technology. A unit has been procured and installed in the vacuum pump shop area to replace the use of a solvent soak tank. Initially, the solvents used in the shop were CFC-113 and a commercial brand cleaner which contained both perchloroethylene and methylene chloride. While the ultrasonic unit was being procured, a terpene-based solvent was used. Generally, parts were soaked overnight in order to soften baked-on vanish. Many times, wire brushing was used to help remove remaining contamination. Initial testing with the ultrasonic cleaner indicated cleaning times of 20 min were as effective as the overnight solvent soaks in removing contamination. Wire brushing was also not required following the ultrasonic cleaning as was sometimes required with the solvent soak

  13. Review On Automatic-Cleaning Basket Strainer

    OpenAIRE

    Deepak Gothwal; Abhijit Dhumal; Anand Gang; Siddharth Gavali; Sandip Shinde

    2015-01-01

    Abstract Clean water is a basic need of every individual. Today in numerous cities of India large number of waste water is produced. Such waste water is polluting natural water bodies like rivers lakes etc. Hence waste water filtration amp waters final purification is need of hour. In conventional type of filters when strainer gets clogged we have to manually clean it which takes time amp filtration processes stops during cleaning process. While in Self-Cleaning Basket Strainer when strainer ...

  14. Cleaning protocol for a FO membrane fouled in wastewater reuse

    KAUST Repository

    Valladares Linares, Rodrigo

    2013-05-30

    microscope and TEP-specific dyeing/staining of the membrane. Two solutions were tested to clean in place of the SL: a 1% NaOCl solution and the same detergent solution used to clean the AL. The former agent compromised the integrity of the FO membrane, as proved with flux and conductivity measurements; 94.5% of flux was recovered with the latter agent, showing that chemically irreversible fouling for the FO membrane is on the order of 5.5%, which might be associated with the adsorption of biopolymers on the AL and some TEP residuals on the SL. Physical cleaning (air scouring) of the AL proved to be the most effective way to control fouling. © 2013 Copyright Balaban Desalination Publications.

  15. Clean Energy Solutions Center Services (Portuguese Translation)

    Energy Technology Data Exchange (ETDEWEB)

    2016-03-01

    This is a Portuguese translation of the Clean Energy Solutions Center Services fact sheet. The Solutions Center offers no-cost expert policy assistance, webinars and training forums, clean energy policy reports, data, and tools provided in partnership with more than 35 leading international and regional clean energy organizations.

  16. Clean Energy Solutions Center Services (Vietnamese Translation)

    Energy Technology Data Exchange (ETDEWEB)

    2016-03-01

    This is a Vietnamese translation of the Clean Energy Solutions Center fact sheet. The Solutions Center offers no-cost expert policy assistance, webinars and training forums, clean energy policy reports, data, and tools provided in partnership with more than 35 leading international and regional clean energy organizations.

  17. 49 CFR 174.615 - Cleaning cars.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 2 2010-10-01 2010-10-01 false Cleaning cars. 174.615 Section 174.615... Requirements for Division 6.1 (Poisonous) Materials § 174.615 Cleaning cars. (a) (b) After Division 6.1 (poisonous) materials are unloaded from a rail car, that car must be thoroughly cleaned unless the car...

  18. Clean Energy Solutions Center Services (Arabic Translation)

    Energy Technology Data Exchange (ETDEWEB)

    2016-03-01

    This is an Arabic translation of the Clean Energy Solutions Center fact sheet. The Solutions Center offers no-cost expert policy assistance, webinars and training forums, clean energy policy reports, data, and tools provided in partnership with more than 35 leading international and regional clean energy organizations.

  19. Clean Energy Manufacturing Analysis Center (CEMAC)

    Energy Technology Data Exchange (ETDEWEB)

    2015-12-01

    The U.S. Department of Energy's Clean Energy Manufacturing Analysis Center (CEMAC) provides objective analysis and up-to-date data on global supply chains and manufacturing of clean energy technologies. Policymakers and industry leaders seek CEMAC insights to inform choices to promote economic growth and the transition to a clean energy economy.

  20. Clean Energy Solutions Center Services (Fact Sheet)

    Energy Technology Data Exchange (ETDEWEB)

    2014-04-01

    The Clean Energy Solutions Center (Solutions Center) helps governments, advisors and analysts create policies and programs that advance the deployment of clean energy technologies. The Solutions Center partners with international organizations to provide online training, expert assistance, and technical resources on clean energy policy.

  1. Air cleaning using regenerative silica gel wheel

    DEFF Research Database (Denmark)

    Fang, Lei

    2011-01-01

    This paper discussed the necessity of indoor air cleaning and the state of the art information on gas-phase air cleaning technology. The performance and problems of oxidation and sorption air cleaning technology were summarized and analysed based on the literature studies. Eventually, based on an...

  2. Clean Cities Now, Vol. 18, No. 2

    Energy Technology Data Exchange (ETDEWEB)

    None

    2015-01-19

    This is version 18.2 of Clean Cities Now, the official biannual newsletter of the Clean Cities program. Clean Cities is an initiative designed to reduce petroleum consumption in the transportation sector by advancing the use of alternative and renewable fuels, fuel economy improvements, idle-reduction measures, and new technologies, as they emerge.

  3. 7 CFR 51.606 - Clean.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 2 2010-01-01 2010-01-01 false Clean. 51.606 Section 51.606 Agriculture Regulations of the Department of Agriculture AGRICULTURAL MARKETING SERVICE (Standards, Inspections, Marketing... Consumer Standards for Celery Stalks Definitions § 51.606 Clean. Clean means that the stalk is...

  4. 7 CFR 51.1553 - Fairly clean.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 2 2010-01-01 2010-01-01 false Fairly clean. 51.1553 Section 51.1553 Agriculture Regulations of the Department of Agriculture AGRICULTURAL MARKETING SERVICE (Standards, Inspections, Marketing... Standards for Grades of Potatoes 1 Definitions § 51.1553 Fairly clean. Fairly clean means that at least...

  5. 7 CFR 51.1581 - Fairly clean.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 2 2010-01-01 2010-01-01 false Fairly clean. 51.1581 Section 51.1581 Agriculture Regulations of the Department of Agriculture AGRICULTURAL MARKETING SERVICE (Standards, Inspections, Marketing... Consumer Standards for Potatoes Definitions § 51.1581 Fairly clean. Fairly clean means that from...

  6. 7 CFR 51.1316 - Clean.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 2 2010-01-01 2010-01-01 false Clean. 51.1316 Section 51.1316 Agriculture Regulations of the Department of Agriculture AGRICULTURAL MARKETING SERVICE (Standards, Inspections, Marketing... Standards for Winter Pears 1 Definitions § 51.1316 Clean. Clean means free from excessive dirt, dust,...

  7. 7 CFR 29.2256 - Clean.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 2 2010-01-01 2010-01-01 false Clean. 29.2256 Section 29.2256 Agriculture Regulations... INSPECTION Standards Official Standard Grades for Virginia Fire-Cured Tobacco (u.s. Type 21) § 29.2256 Clean. Tobacco is described as clean when it contains only a normal amount of sand or soil particles....

  8. 7 CFR 51.1552 - Clean.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 2 2010-01-01 2010-01-01 false Clean. 51.1552 Section 51.1552 Agriculture Regulations of the Department of Agriculture AGRICULTURAL MARKETING SERVICE (Standards, Inspections, Marketing... Standards for Grades of Potatoes 1 Definitions § 51.1552 Clean. Clean means that at least 90 percent of...

  9. 7 CFR 29.3507 - Clean.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 2 2010-01-01 2010-01-01 false Clean. 29.3507 Section 29.3507 Agriculture Regulations of the Department of Agriculture AGRICULTURAL MARKETING SERVICE (Standards, Inspections, Marketing... Type 95) § 29.3507 Clean. Tobacco is described as clean when it contains only a normal amount of...

  10. 7 CFR 51.2288 - Clean.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 2 2010-01-01 2010-01-01 false Clean. 51.2288 Section 51.2288 Agriculture Regulations of the Department of Agriculture AGRICULTURAL MARKETING SERVICE (Standards, Inspections, Marketing... Standards for Shelled English Walnuts (Juglans Regia) Definitions § 51.2288 Clean. Clean means that...

  11. 7 CFR 51.1867 - Clean.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 2 2010-01-01 2010-01-01 false Clean. 51.1867 Section 51.1867 Agriculture Regulations of the Department of Agriculture AGRICULTURAL MARKETING SERVICE (Standards, Inspections, Marketing... Standards for Fresh Tomatoes 1 Definitions § 51.1867 Clean. Clean means that the tomato is practically...

  12. 7 CFR 51.2965 - Fairly clean.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 2 2010-01-01 2010-01-01 false Fairly clean. 51.2965 Section 51.2965 Agriculture Regulations of the Department of Agriculture AGRICULTURAL MARKETING SERVICE (Standards, Inspections, Marketing... Standards for Grades of Walnuts in the Shell Definitions § 51.2965 Fairly clean. Fairly clean means...

  13. 7 CFR 51.2654 - Clean.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 2 2010-01-01 2010-01-01 false Clean. 51.2654 Section 51.2654 Agriculture Regulations of the Department of Agriculture AGRICULTURAL MARKETING SERVICE (Standards, Inspections, Marketing... Standards for Grades for Sweet Cherries 1 Definitions § 51.2654 Clean. Clean means that the cherries...

  14. 7 CFR 29.6007 - Clean.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 2 2010-01-01 2010-01-01 false Clean. 29.6007 Section 29.6007 Agriculture Regulations of the Department of Agriculture AGRICULTURAL MARKETING SERVICE (Standards, Inspections, Marketing... INSPECTION Standards Definitions § 29.6007 Clean. Tobacco is described as clean when it contains only...

  15. 7 CFR 51.2083 - Clean.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 2 2010-01-01 2010-01-01 false Clean. 51.2083 Section 51.2083 Agriculture Regulations of the Department of Agriculture AGRICULTURAL MARKETING SERVICE (Standards, Inspections, Marketing... Standards for Grades of Almonds in the Shell Definitions § 51.2083 Clean. Clean means that the shell...

  16. 7 CFR 29.1004 - Clean.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 2 2010-01-01 2010-01-01 false Clean. 29.1004 Section 29.1004 Agriculture Regulations of the Department of Agriculture AGRICULTURAL MARKETING SERVICE (Standards, Inspections, Marketing... Type 92) § 29.1004 Clean. Tobacco is described as clean when it contains only a normal amount of...

  17. 7 CFR 51.2118 - Clean.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 2 2010-01-01 2010-01-01 false Clean. 51.2118 Section 51.2118 Agriculture Regulations of the Department of Agriculture AGRICULTURAL MARKETING SERVICE (Standards, Inspections, Marketing... Standards for Grades of Shelled Almonds Definitions § 51.2118 Clean. Clean means that the kernel...

  18. 7 CFR 29.3009 - Clean.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 2 2010-01-01 2010-01-01 false Clean. 29.3009 Section 29.3009 Agriculture Regulations of the Department of Agriculture AGRICULTURAL MARKETING SERVICE (Standards, Inspections, Marketing... Clean. Tobacco is described as clean when it contains only a normal amount of sand or soil...

  19. 7 CFR 51.3061 - Clean.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 2 2010-01-01 2010-01-01 false Clean. 51.3061 Section 51.3061 Agriculture Regulations of the Department of Agriculture AGRICULTURAL MARKETING SERVICE (Standards, Inspections, Marketing... Standards for Florida Avocados Definitions § 51.3061 Clean. Clean means that the avocado is practically...

  20. 7 CFR 51.1275 - Clean.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 2 2010-01-01 2010-01-01 false Clean. 51.1275 Section 51.1275 Agriculture Regulations of the Department of Agriculture AGRICULTURAL MARKETING SERVICE (Standards, Inspections, Marketing... Standards for Summer and Fall Pears 1 Definitions § 51.1275 Clean. Clean means free from excessive...

  1. 7 CFR 51.570 - Clean.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 2 2010-01-01 2010-01-01 false Clean. 51.570 Section 51.570 Agriculture Regulations of the Department of Agriculture AGRICULTURAL MARKETING SERVICE (Standards, Inspections, Marketing... Standards for Celery Definitions § 51.570 Clean. Clean means that the stalk is practically free from dirt...

  2. Clean Energy Solutions Center Services (French Translation)

    Energy Technology Data Exchange (ETDEWEB)

    2016-03-01

    This is a French translation of the Clean Energy Solutions Center fact sheet. The Solutions Center offers no-cost expert policy assistance, webinars and training forums, clean energy policy reports, data, and tools provided in partnership with more than 35 leading international and regional clean energy organizations.

  3. 48 CFR 36.512 - Cleaning up.

    Science.gov (United States)

    2010-10-01

    ... 48 Federal Acquisition Regulations System 1 2010-10-01 2010-10-01 false Cleaning up. 36.512... CONTRACTING CONSTRUCTION AND ARCHITECT-ENGINEER CONTRACTS Contract Clauses 36.512 Cleaning up. The contracting officer shall insert the clause at 52.236-12, Cleaning Up, in solicitations and contracts when a...

  4. Clean Energy Solutions Center Services (Chinese Translation)

    Energy Technology Data Exchange (ETDEWEB)

    2016-03-01

    This is a Mandarin translation of the Clean Energy Solutions Center fact sheet. The Solutions Center offers no-cost expert policy assistance, webinars and training forums, clean energy policy reports, data, and tools provided in partnership with more than 35 leading international and regional clean energy organizations.

  5. Quantitative measurement of the efficacy of protein removal by cleaning formulations; comparative evaluation of prion-directed cleaning chemistries.

    Science.gov (United States)

    Ungurs, M; Hesp, J R; Poolman, T; McLuckie, G; O'Brien, S; Murdoch, H; Wells, P; Raven, N D H; Walker, J T; Sutton, J M

    2010-02-01

    The stability of the infectious agent causing variant Creutzfeldt-Jakob disease (vCJD) has highlighted the importance of cleaning surgical instruments for controlling potential spread of iatrogenic CJD. In this study, thermostable adenylate kinases (tAKs) in test soil were coated on to stainless steel and these surrogate agents used to evaluate the efficacy of a range of cleaning chemistries in a bench-top washer disinfector (btWD), or as a pre-soak either with or without subsequent treatment by btWD. Two tAKs were tested initially for ease of removal, the most persistent being Sulfolobus acidocaldarius-derived tAK which was used for evaluating the cleaning chemistries. Conventional chemistries were generally more effective when used in a btWD than as pre-soaks. Cleaning efficacy improved when pre-soaks were followed by treatment with intermediate performing enzymes, demonstrating greater than additive effect on residual tAK activity. Three of the four prion-directed chemistries reduced residual tAK activity to below the limit of quantification (LoQ) by more than 4.8 log(10); product also reduced residual tAK activity to below the LoQ but only when used in a btWD. tAK soil dried on to the device was removed less efficiently than tAK soil still moist on the device, with a 320-fold and 28-fold increase in residual tAK activity for pre-soak and btWD, respectively. The study demonstrated the potential for a tAK indicator to describe the effectiveness of protein removal using different chemistries or treatment processes.

  6. Clean Air Act. Revision 5

    Energy Technology Data Exchange (ETDEWEB)

    1994-02-15

    This Reference Book contains a current copy of the Clean Air Act, as amended, and those regulations that implement the statute and appear to be most relevant to DOE activities. The document is provided to DOE and contractor staff for informational purposes only and should not be interpreted as legal guidance. This Reference Book has been completely revised and is current through February 15, 1994.

  7. Battery Technology Stores Clean Energy

    Science.gov (United States)

    2008-01-01

    Headquartered in Fremont, California, Deeya Energy Inc. is now bringing its flow batteries to commercial customers around the world after working with former Marshall Space Flight Center scientist, Lawrence Thaller. Deeya's liquid-cell batteries have higher power capability than Thaller's original design, are less expensive than lead-acid batteries, are a clean energy alternative, and are 10 to 20 times less expensive than nickel-metal hydride batteries, lithium-ion batteries, and fuel cell options.

  8. Clean Evidence on Peer Pressure

    OpenAIRE

    Falk, Armin; Ichino, Andrea

    2003-01-01

    While confounding factors typically jeopardize the possibility of using observational data to measure peer effects, field experiments over the potential for obtaining clean evidence. In this paper we measure the output of subjects who were asked to stuff letters into envelopes, with a remuneration completely independent of output. We study two treatments. In the 'pair' treatment two subjects work at the same time in the same room. Peer effects are possible in this situation and imply that out...

  9. 'How To' Clean Room Video

    Science.gov (United States)

    McCarty, Kaley Corinne

    2013-01-01

    One of the projects that I am completing this summer is a Launch Services Program intern 'How to' set up a clean room informational video. The purpose of this video is to go along with a clean room kit that can be checked out by employees at the Kennedy Space Center and to be taken to classrooms to help educate students and intrigue them about NASA. The video will include 'how to' set up and operate a clean room at NASA. This is a group project so we will be acting as a team and contributing our own input and ideas. We will include various activities for children in classrooms to complete, while learning and having fun. Activities that we will explain and film include: helping children understand the proper way to wear a bunny suit, a brief background on cleanrooms, and the importance of maintaining the cleanliness of a space craft. This project will be shown to LSP management and co-workers; we will be presenting the video once it is completed.

  10. Nuclear air cleaning programs in USA

    International Nuclear Information System (INIS)

    The paper describes air cleaning research activities in the United States nuclear program other than those described in the various papers presented at the conference. First described are those related to aerosol and particulate cleaning generic programs. Discussed next are air cleaning regulations and standards. Specific activities underway in developing air cleaning information and processes for specific areas are discussed beginning with the support of nuclear reactors, e.g., the Electric Power Research Institute programs on reactor accident phenomena and the Savannah River Site program related to aerosol and adsorber research. Finally, the limited research activities in support of air cleaning systems for nuclear fuel reprocessing are described

  11. Steam Generator Chemical Cleaning Application: Korean Experience in PWR NPP

    International Nuclear Information System (INIS)

    Korea Hydro and Nuclear Power (KHNP) performed an EPRI/SGOG chemical cleaning of the secondary side of the steam generators at Ulchin Unit 3 (UCN3) in March 2011 and at Ulchin Unit 4 (UCN4) in September 2011. The steam generator chemical cleaning (SGCC) was performed with venting at the top-of-tube sheet (TTS) and at tube support plates (TSPs) 4, 5, 6, 7, 8, 9, and 10. A primary objective of this SGCC was to address outer diameter stress corrosion cracking (ODSCC), which has been observed at the TTS and TSPs in the UCN3 SGs. The EPRI/SGOG process has been shown to effectively reduce prevailing ODSCC rates at the TTS and TSPs, particularly when applied with periodic venting in this application. This was the first full-length SGCC campaign with venting performed in Korea. Ulchin Unit 3 commenced commercial operation in August 1998 and Ulchin Unit 4 commenced commercial operation in December 1999. UCN3 and UCN4 are a two-loop pressurized water reactor (PWR) of the Korea Standard Nuclear Plant (KSNP) design. The SGs contain high-temperature mill annealed (HTMA) Alloy 600 tubing and are similar in design to the Combustion Engineering CE-80. The KSNP SGs have been susceptible to outer diameter stress corrosion cracking (ODSCC), which is consistent with operating experience for other SGs containing Alloy 600HTMA tubing material. The UCN3/4 SGs have recently begun to experience ODSCC. Hankook Jungsoo Industries Co., Ltd (HaJI) was selected as the cleaning vendor by KHNP. To date, HaJI has completed five Advanced Scale Conditioning Agent (ASCA) cleaning applications and two EPRI/SGOG Steam Generator Chemical Cleaning (SGCC) campaigns for KHNP. The goal of total deposit removal of the applications were successfully achieved and the amounts are 3,579 kg at UCN3 and 3,786 kg at UCN4 which values were estimated before each cleaning by analysing ECT signal and liquid samples from the SGs. The deposits from the SGs were primarily composed of magnetite. There were no chemical

  12. Clean

    Institute of Scientific and Technical Information of China (English)

    何伟文

    2005-01-01

    Core competitiveness is a notion familiar to most managers with an MBA degree, These days, this is what is taught at renowned business schools and colleges. And in the real world,large and small enterprises are increasingly following this course of action, To concentrate on one or two single lines of business in most cases makes sense and boosts profit, There are, however,

  13. Supersonic Gas-Liquid Cleaning System

    Science.gov (United States)

    Kinney, Frank

    1996-01-01

    The Supersonic Gas-Liquid Cleaning System Research Project consisted mainly of a feasibility study, including theoretical and engineering analysis, of a proof-of-concept prototype of this particular cleaning system developed by NASA-KSC. The cleaning system utilizes gas-liquid supersonic nozzles to generate high impingement velocities at the surface of the device to be cleaned. The cleaning fluid being accelerated to these high velocities may consist of any solvent or liquid, including water. Compressed air or any inert gas is used to provide the conveying medium for the liquid, as well as substantially reduce the total amount of liquid needed to perform adequate surface cleaning and cleanliness verification. This type of aqueous cleaning system is considered to be an excellent way of conducting cleaning and cleanliness verification operations as replacements for the use of CFC 113 which must be discontinued by 1995. To utilize this particular cleaning system in various cleaning applications for both the Space Program and the commercial market, it is essential that the cleaning system, especially the supersonic nozzle, be characterized for such applications. This characterization consisted of performing theoretical and engineering analysis, identifying desirable modifications/extensions to the basic concept, evaluating effects of variations in operating parameters, and optimizing hardware design for specific applications.

  14. Review On Automatic-Cleaning Basket Strainer

    Directory of Open Access Journals (Sweden)

    Deepak Gothwal

    2015-04-01

    Full Text Available Abstract Clean water is a basic need of every individual. Today in numerous cities of India large number of waste water is produced. Such waste water is polluting natural water bodies like rivers lakes etc. Hence waste water filtration amp waters final purification is need of hour. In conventional type of filters when strainer gets clogged we have to manually clean it which takes time amp filtration processes stops during cleaning process. While in Self-Cleaning Basket Strainer when strainer gets clogged a pressure difference is created between inlet amp outlet nozzle which is sensed by the differential pressure gauges. A differential pressure gauge activates backwash assembly which automatically cleans the strainer. Hence Self-Cleaning Basket Strainer is used to save cleaning time amp it automates the filtering process.

  15. True Cost of Amateur Clean rooms

    Science.gov (United States)

    Ramsey, W. Lawrence

    2005-01-01

    This viewgraph document reviews the cost factors for clean rooms that are not professionally built, monitored or maintained. These amateur clean rooms are built because scientist and engineers desire to create a clean room to build a part of an experiment that requires a clean room, and the program manager is looking to save money. However, in the long run these clean rooms may not save money, as the cost of maintenance may be higher due to the cost of transporting the crews, and if the materials were of lesser quality, the cost of modifications may diminish any savings, and the product may not be of the same quality. Several examples are shown of the clean rooms that show some of the problems that can arise from amateur clean rooms.

  16. AgentChess : An Agent Chess Approach

    OpenAIRE

    Fransson, Henric

    2003-01-01

    The game of chess has many times been discussed and used for test purpose by science departments of Artificial Intelligence (AI). Although the technique of agent and as well multi-agent systems is quite old, the use of these offspring of AI within chess is limited. This report describes the project performed applying the use of agents to a chess program. To measure the performance of the logic has tests between the developed program main parts been performed. Further tests against a tradition...

  17. IDEA Clean Energy Application Center

    Energy Technology Data Exchange (ETDEWEB)

    Thornton, Robert

    2013-09-30

    The DOE Clean Energy Application Centers were launched with a goal of focusing on important aspects of our nation’s energy supply including Efficiency, Reliability and Resiliency. Clean Energy solutions based on Combined Heat & Power (CHP), District Energy and Waste Heat Recovery are at the core of ensuring a reliable and efficient energy infrastructure for campuses, communities, and industry and public enterprises across the country. IDEA members which include colleges and universities, hospitals, airports, downtown utilities as well as manufacturers, suppliers and service providers have long-standing expertise in the planning, design, construction and operations of Clean Energy systems. They represent an established base of successful projects and systems at scale and serve important and critical energy loads. They also offer experience, lessons learned and best practices which are of immense value to the sustained growth of the Clean Energy sector. IDEA has been able to leverage the funds from the project award to raise the visibility, improve the understanding and increase deployment CHP, District Energy and Waste Heat Recovery solutions across the regions of our nation, in collaboration with the regional CEAC’s. On August 30, 2012, President Obama signed an Executive Order to accelerate investments in industrial energy efficiency (EE), including CHP and set a national goal of 40 GW of new CHP installation over the next decade IDEA is pleased to have been able to support this Executive Order in a variety of ways including raising awareness of the goal through educational workshops and Conferences and recognizing the installation of large scale CHP and district energy systems A supporting key area of collaboration has involved IDEA providing technical assistance on District Energy/CHP project screenings and feasibility to the CEAC’s for multi building, multi-use projects. The award was instrumental in the development of a first-order screening

  18. ECOLOGICAL CLEANING SYSTEMS FOR OLD ICONS PAINTED IN TEMPERA

    Directory of Open Access Journals (Sweden)

    Silvea Pruteanu

    2014-12-01

    Full Text Available Old icons, especially those involved in liturgical rituals are affected in time by external agents factors (temperature, humidity, light, pollution, microbiological attack, abrasion etc., resulting changes of the appearance and of the structural integrity, dirt deposits, altered varnish and painting layer, cracks, material loss etc. In order to remove the dirt deposits, there are used cleaning systems with dry wiping, vacuuming, scraping, washing with organic solvents, ion exchange solutions, polyelectrolytes, surfactants, and so on, by enzymatic systems or by laser pyrolysis. The last two processes being considered aggressive and highly invasive, although they do clean very well adherent dirt deposits, which strongly degraded the varnish to total blackening (the iconographic image cannot be seen. Based on the literature in the field, regarding the nature of the materials used during the painting process and of the types and structures of the deposits, a series of alcoholic solutions of different concentrations were made, as such or basified, which were compared with ecologic synergic systems based on organic uncolored vegetable juices and decoctions from dried plants. The cleaning effectiveness was done by visual analysis and CIE L*a*b* reflection colorimetry, space proposed by the CIE (International Commission on Illumination in 1976, was used. This technique permitting to determine by color deviations the critical point where the patina and polychromes layer.

  19. Cleaning Massive Sonar Point Clouds

    DEFF Research Database (Denmark)

    Arge, Lars Allan; Larsen, Kasper Green; Mølhave, Thomas;

    2010-01-01

    We consider the problem of automatically cleaning massive sonar data point clouds, that is, the problem of automatically removing noisy points that for example appear as a result of scans of (shoals of) fish, multiple reflections, scanner self-reflections, refraction in gas bubbles, and so on. We...... describe a new algorithm that avoids the problems of previous local-neighbourhood based algorithms. Our algorithm is theoretically I/O-efficient, that is, it is capable of efficiently processing massive sonar point clouds that do not fit in internal memory but must reside on disk. The algorithm is also...

  20. Cleaning insertions and collimation challenges

    CERN Document Server

    Redaelli, S; Bertarelli, A; Bruce, R; Jowett, J M; Lechner, A; Losito, R

    2015-01-01

    High-performance collimation systems are essential for operating efficiently modern hadron machine with large beam intensities. In particular, at the LHC the collimation system ensures a clean disposal of beam halos in the superconducting environment. The challenges of the HL-LHC study pose various demanding requests for beam collimation. In this paper we review the present collimation system and its performance during the LHC Run 1 in 2010–2013. Various collimation solutions under study to address the HL-LHC requirements are then reviewed, identifying the main upgrade baseline and pointing out advanced collimation concept for further enhancement of the performance.

  1. Riot Control Agents

    Science.gov (United States)

    ... a person has been exposed to riot control agents. Long-term health effects of exposure to riot control agents Prolonged ... person is removed from exposure to riot control agents, long-term health effects are unlikely to occur. How you can ...

  2. Reasoning about emotional agents

    NARCIS (Netherlands)

    Meyer, J.-J.

    2008-01-01

    In this paper we discuss the role of emotions in artificial agent design, and the use of logic in reasoning about the emotional or affective states an agent can reside in. We do so by extending the KARO framework for reasoning about rational agents appropriately. In particular we formalize in this f

  3. Agents modeling agents in information economies

    Energy Technology Data Exchange (ETDEWEB)

    Vidal, J.M.; Durfee, E.H. [Univ. of Michigan, Ann Arbor, MI (United States)

    1996-12-31

    Our goal is to design and build agents that act intelligently when placed in an agent-based information economy, where agents buy and sell services (e.g. thesaurus, search, task planning services, etc.). The economy we are working in is the University of Michigan Digital Library (UMDL), a large scale multidisciplinary effort to build an infrastructure for the delivery of library services. In contrast with a typical economy, an information economy deals in goods and services that are often derived from unique sources (authors, analysts, etc.), so that many goods and services are not interchangeable. Also, the cost of replicating and transporting goods is usually negligible, and the quality of goods and services is difficult to measure objectively: even two sources with essentially the same information might appeal to different audiences. Thus, each agent has its own assessment of the quality of goods and services delivered.

  4. Lack of enhanced effect of a chlorine dioxide-based cleaning regimen on environmental contamination with Clostridium difficile spores.

    Science.gov (United States)

    Goldenberg, S D; Patel, A; Tucker, D; French, G L

    2012-09-01

    Spores of Clostridium difficile may play a significant role in transmission of disease within the healthcare environment and are resistant to a variety of detergents and cleaning fluids. A range of environmental cleaning agents has recently become available, many of which claim to be sporicidal. We investigated the effect of changing to a chlorine dioxide-based cleaning regimen on C. difficile environmental contamination and patient infection rates. The prevalence of environmental contamination was unaffected with a rate of 8% (9/120) before and 8% (17/212) following the change. Rates of patient infection were also unchanged during these periods.

  5. Cleaning-resistant Cupriavidus and Ralstonia bacteria contaminating spacecrafts and the ultra clean rooms they are assembled in.

    Science.gov (United States)

    Leys, N.; Dams, A.; Bossus, A.; Provoost, A.; Venkateswaran, K.; Mergeay, M.

    Background Planetary Protection is preventing microbial contamination of both the target planet and the Earth when sending spacecrafts on interplanetary space mission It is important to preserve the natural conditions of other planets and to not bring with robots earthly microbes forward contamination when looking for spores of extra terrestrial life Spacecrafts and the ultra clean rooms they are assembled in are routinely monitored for microbial contamination It was shown that the floor air and surfaces of such spacecraft assembly rooms often contain Cupriavidu s and Ralstonia bacteria These bacteria not only contaminated the clean rooms but have also been found prior-to-flight on surfaces of space robots such as the Mars Odyssey Orbiter La Duc et al 2003 and even in-flight in ISS cooling water and Shuttle drinking water unpublished Aim In this study several Cupriavidus and Ralstonia strains isolated from space craft assembling rooms and spacecrafts were characterized and analysed in detail Results The analysis showed that all the Cupriavidus and Ralstonia clean-room isolates are able to use a wide variety of substrates as carbon sources including ethanol and acetone In addition they all have accumulated moderate resistances to an extraordinary collection of physical and chemical antimicrobial agents Some of the test strains were able to form biofilms on plastic and metal materials used for space robots a nutritional and

  6. Clean Coal Program Research Activities

    Energy Technology Data Exchange (ETDEWEB)

    Larry Baxter; Eric Eddings; Thomas Fletcher; Kerry Kelly; JoAnn Lighty; Ronald Pugmire; Adel Sarofim; Geoffrey Silcox; Phillip Smith; Jeremy Thornock; Jost Wendt; Kevin Whitty

    2009-03-31

    Although remarkable progress has been made in developing technologies for the clean and efficient utilization of coal, the biggest challenge in the utilization of coal is still the protection of the environment. Specifically, electric utilities face increasingly stringent restriction on the emissions of NO{sub x} and SO{sub x}, new mercury emission standards, and mounting pressure for the mitigation of CO{sub 2} emissions, an environmental challenge that is greater than any they have previously faced. The Utah Clean Coal Program addressed issues related to innovations for existing power plants including retrofit technologies for carbon capture and sequestration (CCS) or green field plants with CCS. The Program focused on the following areas: simulation, mercury control, oxycoal combustion, gasification, sequestration, chemical looping combustion, materials investigations and student research experiences. The goal of this program was to begin to integrate the experimental and simulation activities and to partner with NETL researchers to integrate the Program's results with those at NETL, using simulation as the vehicle for integration and innovation. The investigators also committed to training students in coal utilization technology tuned to the environmental constraints that we face in the future; to this end the Program supported approximately 12 graduate students toward the completion of their graduate degree in addition to numerous undergraduate students. With the increased importance of coal for energy independence, training of graduate and undergraduate students in the development of new technologies is critical.

  7. Scaleable Clean Aluminum Melting Systems

    Energy Technology Data Exchange (ETDEWEB)

    Han, Q.; Das, S.K. (Secat, Inc.)

    2008-02-15

    The project entitled 'Scaleable Clean Aluminum Melting Systems' was a Cooperative Research and Development Agreements (CRADAs) between Oak Ridge National Laboratory (ORNL) and Secat Inc. The three-year project was initially funded for the first year and was then canceled due to funding cuts at the DOE headquarters. The limited funds allowed the research team to visit industrial sites and investigate the status of using immersion heaters for aluminum melting applications. Primary concepts were proposed on the design of furnaces using immersion heaters for melting. The proposed project can continue if the funding agency resumes the funds to this research. The objective of this project was to develop and demonstrate integrated, retrofitable technologies for clean melting systems for aluminum in both the Metal Casting and integrated aluminum processing industries. The scope focused on immersion heating coupled with metal circulation systems that provide significant opportunity for energy savings as well as reduction of melt loss in the form of dross. The project aimed at the development and integration of technologies that would enable significant reduction in the energy consumption and environmental impacts of melting aluminum through substitution of immersion heating for the conventional radiant burner methods used in reverberatory furnaces. Specifically, the program would couple heater improvements with furnace modeling that would enable cost-effective retrofits to a range of existing furnace sizes, reducing the economic barrier to application.

  8. Clean Water for Developing Countries.

    Science.gov (United States)

    Pandit, Aniruddha B; Kumar, Jyoti Kishen

    2015-01-01

    Availability of safe drinking water, a vital natural resource, is still a distant dream to many around the world, especially in developing countries. Increasing human activity and industrialization have led to a wide range of physical, chemical, and biological pollutants entering water bodies and affecting human lives. Efforts to develop efficient, economical, and technologically sound methods to produce clean water for developing countries have increased worldwide. We focus on solar disinfection, filtration, hybrid filtration methods, treatment of harvested rainwater, herbal water disinfection, and arsenic removal technologies. Simple, yet innovative water treatment devices ranging from use of plant xylem as filters, terafilters, and hand pumps to tippy taps designed indigenously are methods mentioned here. By describing the technical aspects of major water disinfection methods relevant for developing countries on medium to small scales and emphasizing their merits, demerits, economics, and scalability, we highlight the current scenario and pave the way for further research and development and scaling up of these processes. This review focuses on clean drinking water, especially for rural populations in developing countries. It describes various water disinfection techniques that are not only economically viable and energy efficient but also employ simple methodologies that are effective in reducing the physical, chemical, and biological pollutants found in drinking water to acceptable limits.

  9. Appalachian clean coal technology consortium

    Energy Technology Data Exchange (ETDEWEB)

    Kutz, K.; Yoon, Roe-Hoan [Virginia Polytechnic Institute and State Univ., Blacksburg, VA (United States)

    1995-11-01

    The Appalachian Clean Coal Technology Consortium (ACCTC) has been established to help U.S. coal producers, particularly those in the Appalachian region, increase the production of lower-sulfur coal. The cooperative research conducted as part of the consortium activities will help utilities meet the emissions standards established by the 1990 Clean Air Act Amendments, enhance the competitiveness of U.S. coals in the world market, create jobs in economically-depressed coal producing regions, and reduce U.S. dependence on foreign energy supplies. The research activities will be conducted in cooperation with coal companies, equipment manufacturers, and A&E firms working in the Appalachian coal fields. This approach is consistent with President Clinton`s initiative in establishing Regional Technology Alliances to meet regional needs through technology development in cooperation with industry. The consortium activities are complementary to the High-Efficiency Preparation program of the Pittsburgh Energy Technology Center, but are broader in scope as they are inclusive of technology developments for both near-term and long-term applications, technology transfer, and training a highly-skilled work force.

  10. National Clean Fleets Partnership (Fact Sheet)

    Energy Technology Data Exchange (ETDEWEB)

    2012-01-01

    Provides an overview of Clean Cities National Clean Fleets Partnership (NCFP). The NCFP is open to large private-sector companies that have fleet operations in multiple states. Companies that join the partnership receive customized assistance to reduce petroleum use through increased efficiency and use of alternative fuels. This initiative provides fleets with specialized resources, expertise, and support to successfully incorporate alternative fuels and fuel-saving measures into their operations. The National Clean Fleets Partnership builds on the established success of DOE's Clean Cities program, which reduces petroleum consumption at the community level through a nationwide network of coalitions that work with local stakeholders. Developed with input from fleet managers, industry representatives, and Clean Cities coordinators, the National Clean Fleets Partnership goes one step further by working with large private-sector fleets.

  11. Humus-assisted cleaning of heavy metal contaminated soils

    Science.gov (United States)

    Borggaard, Ole K.; Rasmussen, Signe B.

    2016-04-01

    Contamination of soils with non-degradable heavy metals (HMs) because of human acticities is globally a serious problem threatening human health and ecosystem functioning. To avoid negative effects, HMs must be removed either on-site by plant uptake (phytoremediation) or off-site by extraction (soil washing). In both strategies, HM solubility must be augmented by means of a strong ligand (complexant). Often polycarboxylates such as EDTA and NTA are used but these ligands are toxic, synthetic (non-natural) and may promote HM leaching. Instead naturally occurring soluble humic substances (HS) were tested as means for cleaning HM contaminated soils; HS samples from beech and spruce litter, compost percolate and processed cow slurry were tested. Various long-term HM contaminated soils were extracted with solutions of EDTA, NTA or HS at different pH by single-step and multiple-step extraction mode. The results showed that each of the three complexant types increased HM solubility but the pH-dependent HM extraction efficiency decreased in the order: EDTA ≈ NTA > HS. However, the naturally occurring HS seems suitable for cleaning As, Cd, Cu and Zn contaminated soils both in relation to phytoremediation of moderately contaminated soils and washing of strongly contaminated soils. On the other hand, HS was found unsuited as cleaning agent for Pb polluted calcareous soils. If future field experiments confirm these laboratory results, we have a new cheap and environmentally friendly method for solving a great pollution problem, i.e. cleaning of heavy metal contaminated soils. In addition, humic substances possess additional benefits such as improving soil structure and stimulating microbial activity.

  12. Cleaning Animals' Cages With Little Water

    Science.gov (United States)

    Harman, Benjamin J.

    1989-01-01

    Proposed freeze/thaw method for cleaning animals' cages requires little extra weight and consumes little power and water. Cleaning concept developed for maintaining experimental rat cages on extended space missions. Adaptable as well to similar use on Earth. Reduces cleaning time. Makes use of already available facilities such as refrigerator, glove box, and autoclave. Rat waste adheres to steel-wire-mesh floor of cage. Feces removed by loosening action of freezing-and-thawing process, followed by blast of air.

  13. Deep cleaning--valid or publicity stunt?

    Science.gov (United States)

    Baillie, Jonathan

    2008-03-01

    While deep cleaning is not new--hospitals have undertaken deep cleans ward-by-ward for some time, often following a "superbug" outbreak, Health Secretary Alan Johnson and Prime Minister Gordon Brown both emphasised on announcing the mandate that this was the first time all English NHS hospitals had been asked to deep clean their entire site, "restoring surfaces and fabrics to as close as possible as their original condition". PMID:18411818

  14. An automated cleaning system for hospitals

    OpenAIRE

    Griffin, Colin

    2009-01-01

    Insufficient hygienic practices in Irish hospitals coupled with one of the highest number of reported cases of MRSA in Europe have highlighted the need for solutions to aid in the task of cleaning. This automated cleaning system consisted of two robots: a core robot developed separately with navigational and task scheduling capabilities integrated. The cleaning task was carried out by making use of a commercially available Roomba vacuum cleaner which had been adapted to operate in conju...

  15. National Clean Fleets Partnership (Fact Sheet)

    Energy Technology Data Exchange (ETDEWEB)

    2014-01-01

    Clean Cities' National Clean Fleets Partnership establishes strategic alliances with large fleets to help them explore and adopt alternative fuels and fuel economy measures to cut petroleum use. The initiative leverages the strength of nearly 100 Clean Cities coalitions, nearly 18,000 stakeholders, and more than 20 years of experience. It provides fleets with top-level support, technical assistance, robust tools and resources, and public acknowledgement to help meet and celebrate fleets' petroleum-use reductions.

  16. Anti-scaling agents in kraft pulping

    Directory of Open Access Journals (Sweden)

    Felissia, F. E.

    2007-05-01

    Full Text Available Scale formation in the digester during kraft pulping represents a great problem in pulp mills. Scaling reduces pulping control and efficiency, increasing energy costs and leading to cleaning breakdowns, with subsequent losses in productivity. The kraft process promotes CaCO3 scaling due to high calcium ion and carbonate concentrations, as well as high alkalinity and temperature levels, which increase the speed with which liquors reach a state of supersaturation. This work examines the action of diethylene triamine penta(methylene phosphonic acid (DTPMPA, either alone or combined with commercial anti-scaling agents, as an inhibitor of calcium carbonate precipitation in the kraft pulping of Pinus taeda. The theoretical amount of calcium deposited in the digester was obtained by mass balance. Soluble calcium was stable throughout cooking when using the phosphonates alone or combined with anti-scaling agents. When adding only DTPMPA, calcium stays in the pulp, rather than forming deposits.

  17. Clean Cities Annual Metrics Report 2006

    Energy Technology Data Exchange (ETDEWEB)

    Bergeron, P.; Putsche, V.

    2007-07-01

    Report summarizes Clean Cities coalition accomplishments, including membership, funding, sales of alternative fuel blends, deployment of AFVs and HEVs, idle reduction initiatives, and fuel economy activities.

  18. Novel Cleanup Agents Designed Exclusively for Oil Field Membrane Filtration Systems Low Cost Field Demonstrations of Cleanup Agents in Controlled Experimental Environments

    Energy Technology Data Exchange (ETDEWEB)

    David Burnett; Harold Vance

    2007-08-31

    The goal of our project is to develop innovative processes and novel cleaning agents for water treatment facilities designed to remove fouling materials and restore micro-filter and reverse osmosis (RO) membrane performance. This project is part of Texas A&M University's comprehensive study of the treatment and reuse of oilfield brine for beneficial purposes. Before waste water can be used for any beneficial purpose, it must be processed to remove contaminants, including oily wastes such as residual petroleum hydrocarbons. An effective way of removing petroleum from brines is the use of membrane filters to separate oily waste from the brine. Texas A&M and its partners have developed highly efficient membrane treatment and RO desalination for waste water including oil field produced water. We have also developed novel and new cleaning agents for membrane filters utilizing environmentally friendly materials so that the water from the treatment process will meet U.S. EPA drinking water standards. Prototype micellar cleaning agents perform better and use less clean water than alternate systems. While not yet optimized, the new system restores essentially complete membrane flux and separation efficiency after cleaning. Significantly the amount of desalinated water that is required to clean the membranes is reduced by more than 75%.

  19. Efficient methods of nanoimprint stamp cleaning based on imprint self-cleaning effect

    International Nuclear Information System (INIS)

    Nanoimprint lithography (NIL) is a nonconventional lithographic technique that promises low-cost, high-throughput patterning of structures with sub-10 nm resolution. Contamination of nanoimprint stamps is one of the key obstacles to industrialize the NIL technology. Here, we report two efficient approaches for removal of typical contamination of particles and residual resist from stamps: thermal and ultraviolet (UV) imprinting cleaning-both based on the self-cleaning effect of imprinting process. The contaminated stamps were imprinted onto polymer substrates and after demolding, they were treated with an organic solvent. The images of the stamp before and after the cleaning processes show that the two cleaning approaches can effectively remove contamination from stamps without destroying the stamp structures. The contact angles of the stamp before and after the cleaning processes indicate that the cleaning methods do not significantly degrade the anti-sticking layer. The cleaning processes reported in this work could also be used for substrate cleaning.

  20. Combining a Novel Computer Vision Sensor with a Cleaning Robot to Achieve Autonomous Pig House Cleaning

    DEFF Research Database (Denmark)

    Andersen, Nils Axel; Braithwaite, Ian David; Blanke, Mogens;

    2005-01-01

    condition based cleaning. This paper describes how a novel sensor, developed for the purpose, and algorithms for classification and learning are combined with a commercial robot to obtain an autonomous system which meets the necessary quality attributes. These include features to make selective cleaning...... where dirty areas are detected, that operator assistance is called only when cleanness hypothesis cannot be made with confidence. The paper describes the design of the system where learning from experience maps and operator instructions are combined to obtain a smart and autonomous cleaning robot.......Cleaning of livestock buildings is the single most health-threatening task in the agricultural industry and a transition to robot-based cleaning would be instrumental to improving working conditions for employees. Present cleaning robots fall short on cleanness quality, as they cannot perform...

  1. A novel compound cleaning solution for benzotriazole removal after copper CMP

    Science.gov (United States)

    Zhangbing, Gu; Yuling, Liu; Baohong, Gao; Chenwei, Wang; Haiwen, Deng

    2015-10-01

    After the chemical mechanical planarization (CMP) process, the copper surface is contaminated by a mass of particles (e.g. silica) and organic residues (e.g. benzotriazole), which could do great harm to the integrated circuit, so post-CMP cleaning is essential. In particular, benzotriazole (BTA) forms a layer of Cu-BTA film with copper on the surface, which leads to a hydrophobic surface of copper. So an effective cleaning solution is needed to remove BTA from the copper surface. In this work, a new compound cleaning solution is designed to solve two major problems caused by BTA: one is removing BTA and the other is copper surface corrosion that is caused by the cleaning solution. The cleaning solution is formed of alkaline chelating agent (FA/O II type), which is used to remove BTA, and a surfactant (FA/O I type), which is used as a corrosion inhibitor. BTA removal is characterized by contact angle measurements and electrochemical techniques. The inhibiting corrosion ability of the surfactant is also characterized by electrochemical techniques. The proposed compound cleaning solution shows advantages in removing BTA without corroding the copper surface. Project supported by the Special Project Items No.2 in National Long-Term Technology Development Plan, China (Nos. 2009ZX02308-003, 2014ZX02301003-007).

  2. Microbial water quality in clean water tanks following inspection and cleaning

    OpenAIRE

    Christensen, Sarah Christine Boesgaard; Esbjørn, Anne; Albrechtsen, Hans-Jørgen

    2014-01-01

    Increased bacterial counts are often registered in drinking water leaving clean water tanks after the tanks have been emptied, inspected and cleaned by flushing. To investigate the reason for the increased bacterial concentrations and consequently limit it, samples from two clean water tanks before, during and after cleaning of the tanks were analysed. Bacteria were quantified, the dominating bacterial groups were identified and re-growth potential in the water was estimated. Bacterial counts...

  3. THE INTEGRATED AGENT IN MULTI-AGENT SYSTEMS

    OpenAIRE

    Maleković, Mirko; Čubrilo, Mirko

    2000-01-01

    [n this paper, we characterize the integrated agent in multi-agent systems. The following result is proved: if a multi-agent system is reflexive (symmetric, transitive, Euclidean) then the integrated agent of the multi-agent system is reflexive (symmetric, transitive, Euclidean), respectively. We also prove that the analogous result does not hold for multi-agent system's serial ness. A knowledge relationship between the integrated agent and agents in a multiagent system is presented.

  4. Carbon nanotubes – becoming clean

    Directory of Open Access Journals (Sweden)

    Nicole Grobert

    2007-01-01

    Full Text Available Carbon nanotubes (CNTs are now well into their teenage years. Early on, theoretical predictions and experimental data showed that CNTs possess chemical and mechanical properties that exceed those of many other materials. This has triggered intense research into CNTs. A variety of production methods for CNTs have been developed; chemical modification, functionalization, filling, and doping have been achieved; and manipulation, separation, and characterization of individual CNTs is now possible. Today, products containing CNTs range from tennis rackets and golf clubs to vehicle fenders, X-ray tubes, and Li ion batteries. Breakthroughs for CNT-based technologies are anticipated in the areas of nanoelectronics, biotechnology, and materials science. In this article, I review the current situation in CNT production and highlight the importance of clean CNT material for the success of future applications.

  5. Cleaning lady saves the day

    CERN Multimedia

    2009-01-01

    At lunch time on Wednesday 21 January a guest at the CERN hostel put her food in the microwave oven and switched it on. "Within seconds I smelt plastic. I looked into the oven and saw flames. I switched it off, took my food out. But the flames continued and so I ran for the door." In the corridor she ran into Jane Kiranga, a cleaning lady working for the company ISS. Without hesitation Jane picked up a portable fire extinguisher, returned to the kitchen and stopped the fire. The Fire Brigade arrived a few minutes later and only needed to ventilate the kitchen. "Jane was just in time, because the flames had not left the oven yet. Her model behaviour deserves recognition," said the team leader on duty for the CERN Fire Brigade. A few days later Jane received a gift voucher from the Prevention and Training section of the Safety Commission (photo).

  6. Beam Cleaning and Collimation Systems

    CERN Document Server

    Redaelli, S

    2016-01-01

    Collimation systems in particle accelerators are designed to dispose of unavoidable losses safely and efficiently during beam operation. Different roles are required for different types of accelerator. The present state of the art in beam collimation is exemplified in high-intensity, high-energy superconducting hadron colliders, like the CERN Large Hadron Collider (LHC), where stored beam energies reach levels up to several orders of magnitude higher than the tiny energies required to quench cold magnets. Collimation systems are essential systems for the daily operation of these modern machines. In this document, the design of a multistage collimation system is reviewed, taking the LHC as an example case study. In this case, unprecedented cleaning performance has been achieved, together with a system complexity comparable to no other accelerator. Aspects related to collimator design and operational challenges of large collimation systems are also addressed.

  7. The NOXSO clean coal project

    Energy Technology Data Exchange (ETDEWEB)

    Black, J.B.; Woods, M.C.; Friedrich, J.J.; Browning, J.P. [NOXSO Corp., Bethel Park, PA (United States)

    1997-12-31

    The NOXSO Clean Coal Project will consist of designing, constructing, and operating a commercial-scale flue-gas cleanup system utilizing the NOXSO Process. The process is a waste-free, dry, post-combustion flue-gas treatment technology which uses a regenerable sorbent to simultaneously adsorb sulfur dioxide (SO{sub 2}) and nitrogen oxides (NO{sub x}) from flue gas from coal-fired boilers. The NOXSO plant will be constructed at Alcoa Generating Corporation`s (AGC) Warrick Power Plant near Evansville, Indiana and will treat all the flue gas from the 150-MW Unit 2 boiler. The NOXSO plant is being designed to remove 98% of the SO{sub 2} and 75% of the NO{sub x} when the boiler is fired with 3.4 weight percent sulfur, southern-Indiana coal. The NOXSO plant by-product will be elemental sulfur. The elemental sulfur will be shipped to Olin Corporation`s Charleston, Tennessee facility for additional processing. As part of the project, a liquid SO{sub 2} plant has been constructed at this facility to convert the sulfur into liquid SO{sub 2}. The project utilizes a unique burn-in-oxygen process in which the elemental sulfur is oxidized to SO{sub 2} in a stream of compressed oxygen. The SO{sub 2} vapor will then be cooled and condensed. The burn-in-oxygen process is simpler and more environmentally friendly than conventional technologies. The liquid SO{sub 2} plant produces 99.99% pure SO{sub 2} for use at Olin`s facilities. The $82.8 million project is co-funded by the US Department of Energy (DOE) under Round III of the Clean Coal Technology program. The DOE manages the project through the Pittsburgh Energy Technology Center (PETC).

  8. Rudimentary Cleaning Compared to Level 300A

    Science.gov (United States)

    Arpin, Christina Y. Pina; Stoltzfus, Joel

    2012-01-01

    A study was done to characterize the cleanliness level achievable when using a rudimentary cleaning process, and results were compared to JPR 5322.1G Level 300A. While it is not ideal to clean in a shop environment, some situations (e.g., field combat operations) require oxygen system hardware to be maintained and cleaned to prevent a fire hazard, even though it cannot be sent back to a precision cleaning facility. This study measured the effectiveness of basic shop cleaning. Initially, three items representing parts of an oxygen system were contaminated: a metal plate, valve body, and metal oxygen bottle. The contaminants chosen were those most likely to be introduced to the system during normal use: oil, lubricant, metal shavings/powder, sand, fingerprints, tape, lip balm, and hand lotion. The cleaning process used hot water, soap, various brushes, gaseous nitrogen, water nozzle, plastic trays, scouring pads, and a controlled shop environment. Test subjects were classified into three groups: technical professionals having an appreciation for oxygen hazards; professional precision cleaners; and a group with no previous professional knowledge of oxygen or precision cleaning. Three test subjects were in each group, and each was provided with standard cleaning equipment, a cleaning procedure, and one of each of the three test items to clean. The results indicated that the achievable cleanliness level was independent of the technical knowledge or proficiency of the personnel cleaning the items. Results also showed that achieving a Level 300 particle count was more difficult than achieving a Level A nonvolatile residue amount.

  9. How Do We Clean Our Water and How Clean Does It Need to Be?

    Science.gov (United States)

    Whitburn, Niki

    2013-01-01

    Nowadays, in the United Kingdom, citizens take for granted clean water pumped directly into their homes, but it was not always the case, and is still not so in many countries. Could people clean water themselves if they had to and what could they then use it for? Would it actually be "clean enough" to drink? The author presents children…

  10. Chemical crowd control agents.

    Science.gov (United States)

    Menezes, Ritesh G; Hussain, Syed Ather; Rameez, Mansoor Ali Merchant; Kharoshah, Magdy A; Madadin, Mohammed; Anwar, Naureen; Senthilkumaran, Subramanian

    2016-03-01

    Chemical crowd control agents are also referred to as riot control agents and are mainly used by civil authorities and government agencies to curtail civil disobedience gatherings or processions by large crowds. Common riot control agents used to disperse large numbers of individuals into smaller, less destructive, and more easily controllable numbers include chloroacetophenone, chlorobenzylidenemalononitrile, dibenzoxazepine, diphenylaminearsine, and oleoresin capsicum. In this paper, we discuss the emergency medical care needed by sufferers of acute chemical agent contamination and raise important issues concerning toxicology, safety and health. PMID:26658556

  11. Decontamination Data - Blister Agents

    Data.gov (United States)

    U.S. Environmental Protection Agency — Decontamination efficacy data for blister agents on various building materials using various decontamination solutions This dataset is associated with the following...

  12. Clean tech sector in Oost-Nederland

    NARCIS (Netherlands)

    Bijleveld, P.C. (Paul)

    2011-01-01

    Het doel van dit onderzoek is het in kaart brengen van de private clean tech sector in Oost-Nederland (Gelderland en Overijssel). Clean tech is de verzamelnaam voor producten en diensten die een bijdrage leveren aan een schonere aarde. Als basis voor het onderzoek is een zo volledig mogelijke lijst

  13. Clean Cities 2010 Annual Metrics Report

    Energy Technology Data Exchange (ETDEWEB)

    Johnson, C.

    2012-10-01

    This report details the petroleum savings and vehicle emissions reductions achieved by the U.S. Department of Energy's Clean Cities program in 2010. The report also details other performance metrics, including the number of stakeholders in Clean Cities coalitions, outreach activities by coalitions and national laboratories, and alternative fuel vehicles deployed.

  14. Clean Cities 2011 Annual Metrics Report

    Energy Technology Data Exchange (ETDEWEB)

    Johnson, C.

    2012-12-01

    This report details the petroleum savings and vehicle emissions reductions achieved by the U.S. Department of Energy's Clean Cities program in 2011. The report also details other performance metrics, including the number of stakeholders in Clean Cities coalitions, outreach activities by coalitions and national laboratories, and alternative fuel vehicles deployed.

  15. Clean Cities Now Vol. 19, No. 2

    Energy Technology Data Exchange (ETDEWEB)

    None

    2015-12-18

    Clean Cities Now is the official bi-annual newsletter of Clean Cities, an initiative designed to reduce petroleum consumption in the transportation sector by advancing the use of alternative and renewable fuels, fuel economy improvements, idle-reduction measures, and new technologies, as they emerge.

  16. Clean Cities Now Vol. 20, No. 1

    Energy Technology Data Exchange (ETDEWEB)

    None

    2016-06-13

    Clean Cities Now is the official semi-annual newsletter of Clean Cities, an initiative designed to reduce petroleum consumption in the transportation sector by advancing the use of alternative and renewable fuels, fuel economy improvements, idle-reduction measures, and new technologies, as they emerge.

  17. Electro-impulse Method of Surface Cleaning

    Directory of Open Access Journals (Sweden)

    Bekbolat R. Nussupbekov

    2013-01-01

    Full Text Available This article is focused on the qualitative assessment of the electro-impulse method of surface cleaning efficiency. Heat exchanger tubes are cleaned under the action of blast waves created by the high voltage discharge in the liquid. The article presents dependences of degree of surface purification on the impulse voltage at switching device and on spark rate

  18. 46 CFR 197.452 - Oxygen cleaning.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 7 2010-10-01 2010-10-01 false Oxygen cleaning. 197.452 Section 197.452 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) MARINE OCCUPATIONAL SAFETY AND HEALTH STANDARDS....452 Oxygen cleaning. The diving supervisor shall ensure that equipment used with oxygen or...

  19. Gas turbine cleaning upgrade (compressor wash)

    Energy Technology Data Exchange (ETDEWEB)

    Asplund, P. [Gas Turbine Efficiency, Jarfalla (Sweden)

    1998-12-31

    The influence of gas turbine degradation on operating costs is high. Gas turbine cleaning is one of many actions taken for power recovery and is to consider as preventive maintenance. It is generally performed within the industrial field and occasionally within the aero sector. In order to meet the gas turbine development win high blade loads and ever-increasing temperatures, together with emission Aces and environmental regulations, more efficient and careful cleaning methods are needed. Following a survey about potentials for cost reduction in gas turbine operation a new man-hour and water saving cleaning method has been evaluated for a standard process. Compared with traditional cleaning methods, the new method is water,- cost,- weight and space saving due to a new washing technique. Traditional methods are based on using different nozzles for ON and OFF-line cleaning, which rise the demand for complicated systems. In the new method the same nozzle installation, same liquid flow and pressure is used for both ON and OFF-line cleaning. This gives a cost reduction of appr. 20.000 - 30.000 USD per gas turbine depending on installation and size. Evaluation of the new method shows significantly improved ON -line cleaning performance and thus OFF -line cleaning is required only during scheduled stops. (orig.) 10 refs.

  20. Electro-impulse Method of Surface Cleaning

    OpenAIRE

    Bekbolat R. Nussupbekov; Kappas Kussaynov; Аyanbergen К. Khassenov

    2013-01-01

    This article is focused on the qualitative assessment of the electro-impulse method of surface cleaning efficiency. Heat exchanger tubes are cleaned under the action of blast waves created by the high voltage discharge in the liquid. The article presents dependences of degree of surface purification on the impulse voltage at switching device and on spark rate

  1. Clean Cities Now Vol. 17, No. 2

    Energy Technology Data Exchange (ETDEWEB)

    None

    2013-10-23

    The Fall 2013 issue of the biannual newsletter for the U.S. Department of Energy's Clean Cities initiative. The newsletter includes feature stories on deployment of alternative fuels and advanced vehicles, and articles on Clean Cities coalition successes across the country.

  2. 49 CFR 174.57 - Cleaning cars.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 2 2010-10-01 2010-10-01 false Cleaning cars. 174.57 Section 174.57... and Loading Requirements § 174.57 Cleaning cars. All hazardous material which has leaked from a package in any rail car or on other railroad property must be carefully removed....

  3. Clean Cities Now, Vol. 18, No. 1

    Energy Technology Data Exchange (ETDEWEB)

    None

    2014-04-30

    The Spring 2014 edition of the semi-annual newsletter for the U.S. Department of Energy's Clean Cities initiative. The newsletter includes feature stories on deployment of alternative fuels and advanced vehicles, and articles on Clean Cities coalition successes across the country.

  4. State Grid Contributes to Clean Energy Development

    Institute of Scientific and Technical Information of China (English)

    Zhao

    2010-01-01

    The development of clean energy is an inevitable choice for China to achieve sustainable development.The article presents the strategic thinking and measures for the promotion of clean energy development in grids, which shows that the company will bear its responsibilities for the development as a large state-owned enterprise.

  5. 7 CFR 51.314 - Clean.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 2 2010-01-01 2010-01-01 false Clean. 51.314 Section 51.314 Agriculture Regulations of the Department of Agriculture AGRICULTURAL MARKETING SERVICE (Standards, Inspections, Marketing... Standards for Grades of Apples Definitions § 51.314 Clean. “Clean” means that the apples are free...

  6. 7 CFR 51.3155 - Clean.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 2 2010-01-01 2010-01-01 false Clean. 51.3155 Section 51.3155 Agriculture Regulations of the Department of Agriculture AGRICULTURAL MARKETING SERVICE (Standards, Inspections, Marketing... Standards for Grades of Nectarines Definitions § 51.3155 Clean. “Clean” means that the fruit is...

  7. 7 CFR 29.2506 - Clean.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 2 2010-01-01 2010-01-01 false Clean. 29.2506 Section 29.2506 Agriculture Regulations of the Department of Agriculture AGRICULTURAL MARKETING SERVICE (Standards, Inspections, Marketing...-Cured Tobacco (u.s. Types 22, 23, and Foreign Type 96) § 29.2506 Clean. Tobacco is described as...

  8. 7 CFR 51.2956 - Practically clean.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 2 2010-01-01 2010-01-01 false Practically clean. 51.2956 Section 51.2956 Agriculture Regulations of the Department of Agriculture AGRICULTURAL MARKETING SERVICE (Standards, Inspections, Marketing... Standards for Grades of Walnuts in the Shell Definitions § 51.2956 Practically clean. Practically...

  9. 7 CFR 51.1529 - Clean.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 2 2010-01-01 2010-01-01 false Clean. 51.1529 Section 51.1529 Agriculture Regulations of the Department of Agriculture AGRICULTURAL MARKETING SERVICE (Standards, Inspections, Marketing... Standards for Grades of Fresh Plums and Prunes Definitions § 51.1529 Clean. “Clean” means that the fruit...

  10. 19 CFR 151.71 - Laboratory testing for clean yield.

    Science.gov (United States)

    2010-04-01

    ... 19 Customs Duties 2 2010-04-01 2010-04-01 false Laboratory testing for clean yield. 151.71 Section... Laboratory testing for clean yield. (a) Test and report by Customs laboratory. The clean yield of all general... clean yield. A report of the percentage clean yield of each general sample as established by the...

  11. Clean Coal Technology Programs: Program Update 2009

    Energy Technology Data Exchange (ETDEWEB)

    None

    2009-10-01

    The purpose of the Clean Coal Technology Programs: Program Update 2009 is to provide an updated status of the U.S. Department of Energy (DOE) commercial-scale demonstrations of clean coal technologies (CCT). These demonstrations have been performed under the Clean Coal Technology Demonstration Program (CCTDP), the Power Plant Improvement Initiative (PPII), and the Clean Coal Power Initiative (CCPI). Program Update 2009 provides: (1) a discussion of the role of clean coal technology demonstrations in improving the nation’s energy security and reliability, while protecting the environment using the nation’s most abundant energy resource—coal; (2) a summary of the funding and costs of the demonstrations; and (3) an overview of the technologies being demonstrated, along with fact sheets for projects that are active, recently completed, or recently discontinued.

  12. Clean fuel technologies and clean and reliable energy: a summary

    Energy Technology Data Exchange (ETDEWEB)

    Bulatov, Igor [The University of Manchester, Centre for Process Integration, CEAS, Manchester (United Kingdom); Klemes, Jiri Jaromir [University of Pannonia, Centre for Process Integration and Intensification (CPI2), Research Institute of Chemical and Process Engineering, Faculty of Information Technology, Veszprem (Hungary)

    2011-08-15

    There are two major areas covered by this current Special Issue: Cleaner Fuel Technologies and Waste Processing. In addition, the Special Issue, also includes some recent developments in various fields of energy efficiency research. The first group of contributions considers in detail, hydrogen production from biomass and hydrogen production by the sorption-enhanced steam methane reforming process (SE-SMR). Biomass-related technologies are also discussed for a design of an integrated biorefinery, production of clean diesel fuel by co-hydrogenation of vegetable oil with gas oil and utilization of microwave and ultrasound pretreatments in the production of bioethanol from corn. Waste Processing aspects are considered in the second group of papers. This section includes integrated waste-to-energy plants, utilisation of municipal solid waste in the cement industry and urban supply and disposal systems. The third topic is intentionally made rather loose: it includes different research topics on various aspects of energy efficiency, e.g. resource-saving network design, new research on divided wall columns, vehicle logistics as process-network synthesis for energy consumption and CO{sub 2} reduction.

  13. Clean fuel technologies and clean and reliable energy: a summary

    International Nuclear Information System (INIS)

    There are two major areas covered by this current Special Issue: Cleaner Fuel Technologies and Waste Processing. In addition, the Special Issue, also includes some recent developments in various fields of energy efficiency research. The first group of contributions considers in detail, hydrogen production from biomass and hydrogen production by the sorption-enhanced steam methane reforming process (SE-SMR). Biomass-related technologies are also discussed for a design of an integrated biorefinery, production of clean diesel fuel by co-hydrogenation of vegetable oil with gas oil and utilization of microwave and ultrasound pretreatments in the production of bioethanol from corn. Waste Processing aspects are considered in the second group of papers. This section includes integrated waste-to-energy plants, utilisation of municipal solid waste in the cement industry and urban supply and disposal systems. The third topic is intentionally made rather loose: it includes different research topics on various aspects of energy efficiency, e.g. resource-saving network design, new research on divided wall columns, vehicle logistics as process-network synthesis for energy consumption and CO2 reduction.

  14. Dilute chemical cleaning of PWR steam generators off-line cleaning process evaluation

    International Nuclear Information System (INIS)

    This project evaluated the feasibility of using a low-concentration (approx. 0.5 wt %) chemical cleaning process to remove corrosion product deposits from steam generator surfaces and magnetite from tube-to-support plate crevices of PWR steam generators. The primary objective was to develop a dilute process that could be safely applied at scheduled intervals, such as during normal refueling outages, to maintain a clean operating condition in the steam generator. The dilute chemical cleaning process developed in this project was demonstrated successfully on two model generators which were operated on faulted chemistry by DOE/CRC at Commonwealth's State Line Facility. Unit 5 was cleaned after 48 days of operation with 1% seawater fouling, and Unit 6 was cleaned after 112 days of operations with Lake Michigan water. This report describes work leading to the model generator cleaning demonstrations and provides details of the cleaning operation for each model steam generator

  15. Northeast Clean Energy Application Center

    Energy Technology Data Exchange (ETDEWEB)

    Bourgeois, Tom

    2013-09-30

    From October 1, 2009 through September 30, 2013 (“contract period”), the Northeast Clean Energy Application Center (“NE-CEAC”) worked in New York and New England (Connecticut, Rhode Island, Vermont, Massachusetts, New Hampshire, and Maine) to create a more robust market for the deployment of clean energy technologies (CETs) including combined heat and power (CHP), district energy systems (DES), and waste heat recovery (WHR) systems through the provision of technical assistance, education and outreach, and strategic market analysis and support for decision-makers. CHP, DES, and WHR can help reduce greenhouse gas emissions, reduce electrical and thermal energy costs, and provide more reliable energy for users throughout the United States. The NE-CEAC’s efforts in the provision of technical assistance, education and outreach, and strategic market analysis and support for decision-makers helped advance the market for CETs in the Northeast thereby helping the region move towards the following outcomes: • Reduction of greenhouse gas emissions and criteria pollutants • Improvements in energy efficiency resulting in lower costs of doing business • Productivity gains in industry and efficiency gains in buildings • Lower regional energy costs • Strengthened energy security • Enhanced consumer choice • Reduced price risks for end-users • Economic development effects keeping more jobs and more income in our regional economy Over the contract period, NE-CEAC provided technical assistance to approximately 56 different potential end-users that were interested in CHP and other CETs for their facility or facilities. Of these 56 potential end-users, five new CHP projects totaling over 60 MW of install capacity became operational during the contract period. The NE-CEAC helped host numerous target market workshops, trainings, and webinars; and NE-CEAC staff delivered presentations at many other workshops and conferences. In total, over 60 different workshops

  16. 77 FR 44672 - Notice of Lodging of Consent Decree Under the Clean Water and Clean Air Acts

    Science.gov (United States)

    2012-07-30

    ... of Lodging of Consent Decree Under the Clean Water and Clean Air Acts Notice is hereby given that on... resolve its violations of the Clean Air Act and the Clean Water Act. The Allegheny County Health... the Clean Water Act, Plaintiffs allege that Shenango violated the effluent limitations in the...

  17. Investigation of flushing and clean-out methods for refrigeration equipment to ensure system compatibility

    Energy Technology Data Exchange (ETDEWEB)

    Byrne, J.J.; Shows, M.; Abel, M.W. [Integral Sciences Inc., Columbus, OH (United States)

    1996-04-24

    SECTION 608 of the Clean Air Act Amendments has altered much of the refrigeration service contracting industry. MCLR Project Number 660-52502 was established to examine two areas where the Amendments are influencing contractors to determine if more cost-effective service procedures might be developed. One area where existing service procedures are being revisited involves the removal of contaminants from a refrigeration system after a motor burnout. At one time, a Class 1 substance such as CFC-11 or CFC-113 was used as a flushing agent for cleaning a system after a burnout. On large systems, the compressor was disassembled, and the parts were cleaned using 1,1,1-trichloroethane (TCA) or a TCA-containing mixture. Such alternatives are seldom possible today, as the manufacture of Class 1 substances was banned on January 1, 1996. This report describes processes for mineral oil removal, process alternatives for servicing burnouts, solvents, and laboratory retrofit tests.

  18. Radiographic scintiscanning agent

    International Nuclear Information System (INIS)

    A new technetium-based scintiscanning agent has been prepared comprising a water soluble sup(99m)Tc-methanehydroxydiphosphonate in combination with a reducing agent selected from stannous, ferrous, chromous and titanous salts. As an additional stabilizer salts and esters of gentisic or ascorbic acids have been used. (E.G.)

  19. Agent Development Toolkits

    CERN Document Server

    Singh, Aarti; Sharma, A K

    2011-01-01

    Development of agents as well as their wide usage requires good underlying infrastructure. Literature indicates scarcity of agent development tools in initial years of research which limited the exploitation of this beneficial technology. However, today a wide variety of tools are available, for developing robust infrastructure. This technical note provides a deep overview of such tools and contrasts features provided by them.

  20. Clean Energy Policy Analysis: Impact Analysis of Potential Clean Energy Policy Options for the Hawaii Clean Energy Initiative (HCEI)

    Energy Technology Data Exchange (ETDEWEB)

    Busche, S.; Doris, E.; Braccio, R.; Lippert, D.; Finch, P.; O' Toole, D.; Fetter, J.

    2010-04-01

    This report provides detailed analyses of 21 clean energy policy options considered by the Hawaii Clean Energy Initiative working groups for recommendation to the 2010 Hawaii State Legislature. The report considers the impact each policy may have on ratepayers, businesses, and the state in terms of energy saved, clean energy generated, and the financial costs and benefits. The analyses provide insight into the possible impacts, both qualitative and quantitative, that these policies may have in Hawaii based on the experience with these policies elsewhere. As much as possible, the analyses incorporate Hawaii-specific context to reflect the many unique aspects of energy use in the State of Hawaii.

  1. Asimovian Adaptive Agents

    CERN Document Server

    Gordon, D F

    2011-01-01

    The goal of this research is to develop agents that are adaptive and predictable and timely. At first blush, these three requirements seem contradictory. For example, adaptation risks introducing undesirable side effects, thereby making agents' behavior less predictable. Furthermore, although formal verification can assist in ensuring behavioral predictability, it is known to be time-consuming. Our solution to the challenge of satisfying all three requirements is the following. Agents have finite-state automaton plans, which are adapted online via evolutionary learning (perturbation) operators. To ensure that critical behavioral constraints are always satisfied, agents' plans are first formally verified. They are then reverified after every adaptation. If reverification concludes that constraints are violated, the plans are repaired. The main objective of this paper is to improve the efficiency of reverification after learning, so that agents have a sufficiently rapid response time. We present two solutions: ...

  2. How do agents represent?

    Science.gov (United States)

    Ryan, Alex

    Representation is inherent to the concept of an agent, but its importance in complex systems has not yet been widely recognised. In this paper I introduce Peirce's theory of signs, which facilitates a definition of representation in general. In summary, representation means that for some agent, a model is used to stand in for another entity in a way that shapes the behaviour of the agent with respect to that entity. Representation in general is then related to the theories of representation that have developed within different disciplines. I compare theories of representation from metaphysics, military theory and systems theory. Additional complications arise in explaining the special case of mental representations, which is the focus of cognitive science. I consider the dominant theory of cognition — that the brain is a representational device — as well as the sceptical anti-representational response. Finally, I argue that representation distinguishes agents from non-representational objects: agents are objects capable of representation.

  3. Prepsolv (TM): The optimum alternative to 1,1,1-trichloroethane and methyl ethyl ketone for hand-wipe cleaning of aerospace materials

    Science.gov (United States)

    Gallagher, R. Scott; Purvis, John A.; Moran, Wade W.

    1995-01-01

    Engineers at Hercules Aerospace, a rocket motor manufacturer in Utah, have worked closely with chemists at Glidco Organics to study the feasibility of using terpenes for zero-residue wipe cleaning. The result of this work is a technological breakthrough, in which the barrier to ultra-low non-volatile residue formation has been broken. After 2 years of development and testing, SCM Glidco Organics has announced the availability of Glidsafe(registered trademark) Prepsolv(TM): a state-of-the-art ultra-low residue terpene wipe cleaning agent that does not require rinsing. Prepsolv(TM) can successfully be used in simple hand-wipe cleaning processes without fear of leaving surface residues. Industry testing has confirmed that Prepsolv(TM) is not only highly effective, but can even be less expensive to use than traditional cleaning solvents like methyl chloroform. This paper addresses the features and benefits of Prepsolv(TM), and presents performance and material compatibility data that characterizes this unique cleaning agent. Since its commercialization, Hercules Aerospace has chosen Prepsolv(TM) as the optimum cleaning agent to replace ozone-depleting solvents in their weapons factory in Magna, UT. Likewise, Boeing has approved Prepsolv(TM) for cleaning components in the manufacture of commercial aircraft at their facilities in Seattle, WA and Wichita, KS. Additional approvals are forthcoming for this uniquely safe and effective solvent.

  4. New catalysts for clean environment

    Energy Technology Data Exchange (ETDEWEB)

    Maijanen, A.; Hase, A. [eds.] [VTT Chemical Technology, Espoo (Finland)

    1996-12-31

    VTT launched a Research Programme on Chemical Reaction Mechanisms (CREAM) in 1993. The three-year programme (1993-1995) has focused on reaction mechanisms relevant to process industries and aimed at developing novel catalysts and biocatalysts for forest, food, and specialty chemicals industries as well as for energy production. The preliminary results of this programme have already been presented in the first symposium organized in Espoo in September 1994. To conclude the programme the second symposium is organized in Otaniemi, Espoo on January 29 - 30, 1996. Papers by 19 speakers and 17 poster presentations of the 1996 Symposium are included in this book. The Symposium consists of four sessions: Biotechnology for Natural Fibers Processing, New Biocatalysts, Catalysts for Clean Energy, and New Opportunities for Chemical Industry. The CREAM programme has tried to foresee solutions for the problems challenged by the public concern on environmental aspects, especially dealing with industrial processes and novel use of raw materials and energy. The programme has followed the basic routes that can lead to natural and simple solutions to develop processes in the fields of forest, food fine chemicals, and energy industry. This symposium presents the results of the programme to learn and further discuss together with the international experts that have been invited as keynote speakers. (author)

  5. Midwest Clean Energy Application Center

    Energy Technology Data Exchange (ETDEWEB)

    Cuttica, John; Haefke, Cliff

    2013-12-31

    The Midwest Clean Energy Application Center (CEAC) was one of eight regional centers that promoted and assisted in transforming the market for combined heat and power (CHP), waste heat to power (WHP), and district energy (DE) technologies and concepts throughout the United States between October 1, 2009 and December 31, 2013. The key services the CEACs provided included:  Market Opportunity Analyses – Supporting analyses of CHP market opportunities in diverse markets including industrial, federal, institutional, and commercial sectors.  Education and Outreach – Providing information on the energy and non-energy benefits and applications of CHP to state and local policy makers, regulators, energy end-users, trade associations and others. Information was shared on the Midwest CEAC website: www.midwestcleanergy.org.  Technical Assistance – Providing technical assistance to end-users and stakeholders to help them consider CHP, waste heat to power, and/or district energy with CHP in their facility and to help them through the project development process from initial CHP screening to installation. The Midwest CEAC provided services to the Midwest Region that included the states of Illinois, Indiana, Iowa, Kansas, Michigan, Minnesota, Missouri, Nebraska, North Dakota, Ohio, South Dakota, and Wisconsin.

  6. Midwest Clean Energy Application Center

    Energy Technology Data Exchange (ETDEWEB)

    Cuttica, John; Haefke, Cliff

    2013-12-31

    The Midwest Clean Energy Application Center (CEAC) was one of eight regional centers that promoted and assisted in transforming the market for combined heat and power (CHP), waste heat to power (WHP), and district energy (DE) technologies and concepts throughout the United States between October 1, 2009 and December 31, 2013. The key services the CEACs provided included: Market Opportunity Analyses – Supporting analyses of CHP market opportunities in diverse markets including industrial, federal, institutional, and commercial sectors. Education and Outreach – Providing information on the energy and non-energy benefits and applications of CHP to state and local policy makers, regulators, energy end-users, trade associations and others. Information was shared on the Midwest CEAC website: www.midwestcleanergy.org. Technical Assistance – Providing technical assistance to end-users and stakeholders to help them consider CHP, waste heat to power, and/or district energy with CHP in their facility and to help them through the project development process from initial CHP screening to installation. The Midwest CEAC provided services to the Midwest Region that included the states of Illinois, Indiana, Iowa, Kansas, Michigan, Minnesota, Missouri, Nebraska, North Dakota, Ohio, South Dakota, and Wisconsin.

  7. Cleaning Up Our Drinking Water

    International Nuclear Information System (INIS)

    Imagine drinking water that you wring out of the sponge you've just used to wash your car. This is what is happening around the world. Rain and snow pass through soil polluted with pesticides, poisonous metals and radionuclides into the underground lakes and streams that supply our drinking water. 'We need to understand this natural system better to protect our groundwater and, by extension, our drinking water,' said Pacific Northwest National Laboratory's Applied Geology and Geochemistry Group Manager, Wayne Martin. Biologists, statisticians, hydrologists, geochemists, geologists and computer scientists at PNNL work together to clean up contaminated soils and groundwater. The teams begin by looking at the complexities of the whole environment, not just the soil or just the groundwater. PNNL researchers also perform work for private industries under a unique use agreement between the Department of Energy and Battelle, which operates the laboratory for DOE. This research leads to new remediation methods and technologies to tackle problems ranging from arsenic at old fertilizer plants to uranium at former nuclear sites. Our results help regulators, policy makers and the public make critical decisions on complex environmental issues

  8. Clean Coal Initiatives in India

    Directory of Open Access Journals (Sweden)

    Sribas Goswami

    2014-08-01

    Full Text Available Availability of, and access to, coal is a crucial element of modern economies and it helps pave the way for human development. Accordingly, the thermal power sector and steel industries have been given a high priority in the national planning processes in India and a concerted focus on enhancing these sectors have resulted in significant gain in generation and availability of electricity and steel in the years since independence. To meet the need of huge demand of power coal is excavated. The process of excavation to the use of coal is potential enough to degrade the environment. Coal Mining is a development activity, which is bound to damage the natural ecosystem by all its activities directly and ancillary, starting from land acquisition to coal beneficiation and use of the products. Huge areas in the Raniganj and Jharia coal field in India have become derelict due to abandoned and active opencast and underground mines. The study is pursued to illustrate the facts which show the urgent need to clean coal mining in India.

  9. Cavitation effects in ultrasonic cleaning baths

    Science.gov (United States)

    Glasscock, Barbara H.

    1995-01-01

    In this project, the effect of cavitation from aqueous ultrasonic cleaning on the surfaces of metal and non-metal sample coupons was studied. After twenty cleaning cycles, the mass loss from the aluminum coupons averaged 0.22 mg/sq cm surface area and 0.014 mg/sq cm for both stainless steel and titanium. The aluminum coupons showed visual evidence of minor cavitation erosion in regions of previously existing surface irregularities. The non-metal samples showed some periods of mass gain. These effects are believed to have minor impact on hardware being cleaned, but should be evaluated in the context of specific hardware requirements. Also the ultrasonic activity in the large cleaning baths was found to be unevenly distributed as measured by damage to sheets of aluminum foil. It is therefore recommended that items being cleaned in an ultrasonic bath be moved or conveyed during the cleaning to more evenly distribute the cavitation action provide more uniform cleaning.

  10. The effect of alkaline agents on retention of EOR chemicals

    Energy Technology Data Exchange (ETDEWEB)

    Lorenz, P.B.

    1991-07-01

    This report summarizes a literature survey on how alkaline agents reduce losses of surfactants and polymers in oil recovery by chemical injection. Data are reviewed for crude sulfonates, clean anionic surfactants, nonionic surfactants, and anionic and nonionic polymers. The role of mineral chemistry is briefly described. Specific effects of various alkaline anions are discussed. Investigations needed to improve the design of alkaline-surfactant-polymer floods are suggested. 62 refs., 28 figs., 6 tabs.

  11. CO2 (dry ice) cleaning system

    Science.gov (United States)

    Barnett, Donald M.

    1995-01-01

    Tomco Equipment Company has participated in the dry ice (solid carbon dioxide, CO2) cleaning industry for over ten years as a pioneer in the manufacturer of high density, dry ice cleaning pellet production equipment. For over four years Tomco high density pelletizers have been available to the dry ice cleaning industry. Approximately one year ago Tomco introduced the DI-250, a new dry ice blast unit making Tomco a single source supplier for sublimable media, particle blast, cleaning systems. This new blast unit is an all pneumatic, single discharge hose device. It meters the insertion of 1/8 inch diameter (or smaller), high density, dry ice pellets into a high pressure, propellant gas stream. The dry ice and propellant streams are controlled and mixed from the blast cabinet. From there the mixture is transported to the nozzle where the pellets are accelerated to an appropriate blasting velocity. When directed to impact upon a target area, these dry ice pellets have sufficient energy to effectively remove most surface coatings through dry, abrasive contact. The meta-stable, dry ice pellets used for CO2 cleaning, while labeled 'high density,' are less dense than alternate, abrasive, particle blast media. In addition, after contacting the target surface, they return to their equilibrium condition: a superheated gas state. Most currently used grit blasting media are silicon dioxide based, which possess a sharp tetrahedral molecular structure. Silicon dioxide crystal structures will always produce smaller sharp-edged replicas of the original crystal upon fracture. Larger, softer dry ice pellets do not share the same sharp-edged crystalline structures as their non-sublimable counterparts when broken. In fact, upon contact with the target surface, dry ice pellets will plastically deform and break apart. As such, dry ice cleaning is less harmful to sensitive substrates, workers and the environment than chemical or abrasive cleaning systems. Dry ice cleaning system

  12. Challenges and opportunities for clean coal technology

    International Nuclear Information System (INIS)

    A report is given of some presentations and discussions at the Sixth Clean Coal Technology Conference held in Reno, Nevada, 28 April - 1 May 1998. Accomplishments in 18 projects in the US DOE's Clean Coal Technology Programme were reported upon. The CCT Program has provided a portfolio of technologies to deal effectively with acid rain concerns but challenges remain in achieving ozone standards (an NOx control issue), fine particulate control of PM2.5 and CO2 emission reduction per the Kyoto Protocol in the absence of trading between developed and developing countries under a proposed Clean Development Mechanism and/or sequestration. 9 photos

  13. Abort Gap Cleaning for LHC Run 2

    CERN Document Server

    Uythoven, J; Bravin, E; Goddard, B; Hemelsoet, GH; Höfle, W; Jacquet, D; Kain, V; Mazzoni, S; Meddahi, M; Valuch, D

    2015-01-01

    To minimise the beam losses at the moment of an LHC beam dump the 3 μs long abort gap should contain as few particles as possible. Its population can be minimised by abort gap cleaning using the LHC transverse damper system. The LHC Run 1 experience is briefly recalled; changes foreseen for the LHC Run 2 are presented. They include improvements in the observation of the abort gap population and the mechanism to decide if cleaning is required, changes to the hardware of the transverse dampers to reduce the detrimental effect on the luminosity lifetime and proposed changes to the applied cleaning algorithms.

  14. Case study of establishing a clean production

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Yong Kun; Nam, Yoon Mi [Korea Environment Institute, Seoul (Korea)

    1998-12-01

    This study was implemented to derive suggestions for improving policies in Korea through the examination and analysis on the present policies related to the clean production and its establishment in enterprises. The characters of concept on clean production presented in pollution prevention, waste minimization, zero emission, environmental friendly design, and industrial ecology were analyzed and the mechanism for implementing clean production and government policy were arranged comprehensively. The related policies of major countries with international organizations including UNEP (United Nations Environment Program) and EU (European Union) were reviewed and compared to those of Korea to propose future policy plan. 73 refs., 3 figs., 30 tabs.

  15. CO2 (dry ice) cleaning system

    Science.gov (United States)

    Barnett, Donald M.

    1995-03-01

    Tomco Equipment Company has participated in the dry ice (solid carbon dioxide, CO2) cleaning industry for over ten years as a pioneer in the manufacturer of high density, dry ice cleaning pellet production equipment. For over four years Tomco high density pelletizers have been available to the dry ice cleaning industry. Approximately one year ago Tomco introduced the DI-250, a new dry ice blast unit making Tomco a single source supplier for sublimable media, particle blast, cleaning systems. This new blast unit is an all pneumatic, single discharge hose device. It meters the insertion of 1/8 inch diameter (or smaller), high density, dry ice pellets into a high pressure, propellant gas stream. The dry ice and propellant streams are controlled and mixed from the blast cabinet. From there the mixture is transported to the nozzle where the pellets are accelerated to an appropriate blasting velocity. When directed to impact upon a target area, these dry ice pellets have sufficient energy to effectively remove most surface coatings through dry, abrasive contact. The meta-stable, dry ice pellets used for CO2 cleaning, while labeled 'high density,' are less dense than alternate, abrasive, particle blast media. In addition, after contacting the target surface, they return to their equilibrium condition: a superheated gas state. Most currently used grit blasting media are silicon dioxide based, which possess a sharp tetrahedral molecular structure. Silicon dioxide crystal structures will always produce smaller sharp-edged replicas of the original crystal upon fracture. Larger, softer dry ice pellets do not share the same sharp-edged crystalline structures as their non-sublimable counterparts when broken. In fact, upon contact with the target surface, dry ice pellets will plastically deform and break apart. As such, dry ice cleaning is less harmful to sensitive substrates, workers and the environment than chemical or abrasive cleaning systems. Dry ice cleaning system

  16. Cleaning of aluminum after machining with coolants

    International Nuclear Information System (INIS)

    An x-ray photoemission spectroscopic study was undertaken to compare the cleaning of the Advanced Photon Source (APS) aluminum extrusion storage ring vacuum chambers after machining with and without water soluble coolants. While there was significant contamination left by the coolants, the cleaning process was capable of removing the residue. The variation of the surface and near surface composition of samples machined either dry or with coolants was negligible after cleaning. The use of such coolants in the machining process is therefore recommended

  17. Physical cleaning of high carbon fly ash

    Energy Technology Data Exchange (ETDEWEB)

    Gray, McMahan L.; Champagne, Kenneth J.; Soong, Yee; Killmeyer, Richard P. [National Energy Technology Laboratory, US Department of Energy, P.O. Box 10940, Cochran Mills Roads, 15236 Pittsburgh, PA (United States); Maroto-Valer, M. Mercedes; Andresen, John M. [The Energy Institute, The Pennsylvania State University, 405 Academic Activities Building, 16802-2308 University Park, PA (United States); Ciocco, Michael V.; Zandhuis, Paul H. [Parson Project Services Inc, National Energy Technology Laboratory, P.O. Box 618, 15129 Library, Pittsburgh, PA (United States)

    2002-04-20

    An industrial fly ash sample was cleaned by three different processes, which were triboelectrostatic separation, ultrasonic column agglomeration, and column flotation. The unburned carbon concentrates were collected at purities ranging up to 62% at recoveries of 62%. In addition, optical microscopy studies were conducted on the final carbon concentrates to determine the carbon forms (inertinite, isotropic coke and anisotropic coke) collected from these various physical-cleaning processes. The effects of the various cleaning processes on the production of different carbon forms from high carbon fly ashes will be discussed.

  18. Clean Energy—The Ultimate Solution

    Institute of Scientific and Technical Information of China (English)

    2009-01-01

    Major economies in the world have raised various proposals to reduce carbon emissions by applying clean energies in a bid to tackle climate change. As a major consumer of coal, China is facing mounting pressure, and experts are wrangling about which clean energy should come first on the government agenda. To get a closer look at the current situation in China, Beijing Review reporter Liu Yunyun sat down with Zhou Dadi, Director General Emeritus of the Energy Research Institute of the National Development and Reform Commission, who shared his insights on clean energy. Edited excerpts follow:

  19. Biological warfare agents

    Directory of Open Access Journals (Sweden)

    Duraipandian Thavaselvam

    2010-01-01

    Full Text Available The recent bioterrorist attacks using anthrax spores have emphasized the need to detect and decontaminate critical facilities in the shortest possible time. There has been a remarkable progress in the detection, protection and decontamination of biological warfare agents as many instrumentation platforms and detection methodologies are developed and commissioned. Even then the threat of biological warfare agents and their use in bioterrorist attacks still remain a leading cause of global concern. Furthermore in the past decade there have been threats due to the emerging new diseases and also the re-emergence of old diseases and development of antimicrobial resistance and spread to new geographical regions. The preparedness against these agents need complete knowledge about the disease, better research and training facilities, diagnostic facilities and improved public health system. This review on the biological warfare agents will provide information on the biological warfare agents, their mode of transmission and spread and also the detection systems available to detect them. In addition the current information on the availability of commercially available and developing technologies against biological warfare agents has also been discussed. The risk that arise due to the use of these agents in warfare or bioterrorism related scenario can be mitigated with the availability of improved detection technologies.

  20. Agent-Based Optimization

    CERN Document Server

    Jędrzejowicz, Piotr; Kacprzyk, Janusz

    2013-01-01

    This volume presents a collection of original research works by leading specialists focusing on novel and promising approaches in which the multi-agent system paradigm is used to support, enhance or replace traditional approaches to solving difficult optimization problems. The editors have invited several well-known specialists to present their solutions, tools, and models falling under the common denominator of the agent-based optimization. The book consists of eight chapters covering examples of application of the multi-agent paradigm and respective customized tools to solve  difficult optimization problems arising in different areas such as machine learning, scheduling, transportation and, more generally, distributed and cooperative problem solving.

  1. Users, Bystanders and Agents

    DEFF Research Database (Denmark)

    Krummheuer, Antonia Lina

    2015-01-01

    Human-agent interaction (HAI), especially in the field of embodied conversational agents (ECA), is mainly construed as dyadic communication between a human user and a virtual agent. This is despite the fact that many application scenarios for future ECAs involve the presence of others. This paper...... the construction of the agent’s identity, and (3) how HAI, as a mediated interaction, is framed by an asymmetric participation framework. The paper concludes by suggesting various participation roles, which may inform development of ECAs....

  2. Mathematical modelling of flux recovery during chemical cleaning of tubular membrane fouled with whey proteins

    Directory of Open Access Journals (Sweden)

    Marković Jelena Đ.

    2009-01-01

    Full Text Available Membrane process efficiency in the dairy industry is impaired by the formation of deposits during filtration processes. This work describes cleaning procedures for ceramic tubular membrane (50 nm fouled with whey proteins. Also, mathematical modelling was performed to obtain models which allow deeper insight into the mechanisms involved during cleaning procedures. The caustic solutions (0.2%w/w, 0.4%w/w and 1.0%w/w NaOH and the mixture of two commercial detergents (0.8%w/w P3-ultrasil 69+0.5% w/w P3-ultrasil 67 and 1.2% P3-ultrasil 69+0.75 P3-ultrasil 67 were used as chemical cleaning agents. The results showed that the best flux recovery was achieved with 0.4%w/w NaOH solution. After analyzing the experimental data, five parameter and six parameter kinetic models were suggested for alkali and detergent cleaning, respectively. The changes of total and specific resistances, as well as the change of the effective pore diameter and deposit thickness during cleaning are estimated by applying these models.

  3. Clean Cities Annual Metrics Report 2009 (Revised)

    Energy Technology Data Exchange (ETDEWEB)

    Johnson, C.

    2011-08-01

    Document provides Clean Cities coalition metrics about the use of alternative fuels; the deployment of alternative fuel vehicles, hybrid electric vehicles (HEVs), and idle reduction initiatives; fuel economy activities; and programs to reduce vehicle miles driven.

  4. Clean Air Markets - Compliance Query Wizard

    Data.gov (United States)

    U.S. Environmental Protection Agency — The Compliance Query Wizard is part of a suite of Clean Air Markets-related tools that are accessible at http://ampd.epa.gov/ampd/. The Compliance module provides...

  5. Clean Air Markets - Quick Facts and Trends

    Data.gov (United States)

    U.S. Environmental Protection Agency — The Quick Facts and Trends module is part of a suite of Clean Air Markets-related tools that are accessible at http://camddataandmaps.epa.gov/gdm/index.cfm. The...

  6. Clean conditions during the erection phase

    International Nuclear Information System (INIS)

    Following the basic requirements of the Regulatory Guide 1.37 and ANSI 45.2.1 - Standard on Cleaning of Fluid Systems and Associated Components during the Construction Phase of Nuclear Power Plants as a guideline, the implementation of cleaning operations in the pre-installation phase, the installation phase and the maintenance of clean conditions until the operational phase is covered. Specific information will be given from the practical experience point of view with the work execution under clean conditions of piping and components at the semi-finished product manufacturer, the prefabrication workshop and the on-site installation with specific reference to the various detailed procedures required by individual system builders for nuclear power plants in Germany and abroad. (orig.)

  7. Clean Cities Annual Metrics Report 2008

    Energy Technology Data Exchange (ETDEWEB)

    Johnson, C.; Bergeron, P.

    2009-09-01

    This report summarizes the Department of Energy's Clean Cities coalition accomplishments in 2008, including petroleum displacement data, membership, funding, sales of alternative fuel blends, deployment of AFVs and HEVs, idle reduction initiatives, and fuel economy activities.

  8. Environmental Cleaning and Disinfecting for MRSA

    Science.gov (United States)

    ... Methicillin-resistant Staphylococcus aureus (MRSA) Infections Share Compartir Environmental Cleaning & Disinfecting for MRSA On this Page Selecting ... or dust. Disinfectants are regulated by the U.S. Environmental Protection Agency (EPA). You can use a disinfectant ...

  9. SRF Clean Rooms and Cryomodule Assembly

    Data.gov (United States)

    Federal Laboratory Consortium — Three primary cleanroom facilities used for the SRF cryomodule production program are available. All 3 clean rooms have class 10 and class 100 areas. The largest is...

  10. Clean Technology Evaluation & Workforce Development Program

    Energy Technology Data Exchange (ETDEWEB)

    Patricia Glaza

    2012-12-01

    The overall objective of the Clean Technology Evaluation portion of the award was to design a process to speed up the identification of new clean energy technologies and match organizations to testing and early adoption partners. The project was successful in identifying new technologies targeted to utilities and utility technology integrators, in developing a process to review and rank the new technologies, and in facilitating new partnerships for technology testing and adoption. The purpose of the Workforce Development portion of the award was to create an education outreach program for middle & high-school students focused on clean technology science and engineering. While originally targeting San Diego, California and Cambridge, Massachusetts, the scope of the program was expanded to include a major clean technology speaking series and expo as part of the USA Science & Engineering Festival on the National Mall in Washington, D.C.

  11. Clean Air Status and Trends Network (CASTNET)

    Data.gov (United States)

    U.S. Environmental Protection Agency — The Clean Air Status and Trends Network (CASTNET) is a national air quality monitoring network designed to provide data to assess trends in air quality, atmospheric...

  12. Supporting Clean Energy Development in Swaziland

    Energy Technology Data Exchange (ETDEWEB)

    2016-04-01

    Swaziland, a country largely dependent on regional fossil fuel imports to meet power needs, is vulnerable to supply changes and price shocks. To address this challenge, the country's National Energy Policy and Implementation Strategy prioritizes actions to enhance energy independence through scaling up renewable energy and energy efficiency. With approximately 70 percent of the country lacking electricity, Swaziland is also strongly committed to expanding energy access to support key economic and social development goals. Within this context, energy security and energy access are two foundational objectives for clean energy development in Swaziland. The partnership between the Swaziland Energy Regulatory Authority and the Clean Energy Solutions Center led to concrete outcomes to support clean energy development in Swaziland. Improving renewable energy project licensing processes will enable Swaziland to achieve key national objectives to expand clean energy access and transition to greater energy independence.

  13. Constrained hyperbolic divergence cleaning in smoothed particle magnetohydrodynamics with variable cleaning speeds

    Science.gov (United States)

    Tricco, Terrence S.; Price, Daniel J.; Bate, Matthew R.

    2016-10-01

    We present an updated constrained hyperbolic/parabolic divergence cleaning algorithm for smoothed particle magnetohydrodynamics (SPMHD) that remains conservative with wave cleaning speeds which vary in space and time. This is accomplished by evolving the quantity ψ /ch instead of ψ. Doing so allows each particle to carry an individual wave cleaning speed, ch, that can evolve in time without needing an explicit prescription for how it should evolve, preventing circumstances which we demonstrate could lead to runaway energy growth related to variable wave cleaning speeds. This modification requires only a minor adjustment to the cleaning equations and is trivial to adopt in existing codes. Finally, we demonstrate that our constrained hyperbolic/parabolic divergence cleaning algorithm, run for a large number of iterations, can reduce the divergence of the magnetic field to an arbitrarily small value, achieving ∇ ṡ B = 0 to machine precision.

  14. Constrained hyperbolic divergence cleaning in smoothed particle magnetohydrodynamics with variable cleaning speeds

    CERN Document Server

    Tricco, Terrence S; Bate, Matthew R

    2016-01-01

    We present an updated constrained hyperbolic/parabolic divergence cleaning algorithm for smoothed particle magnetohydrodynamics (SPMHD) that remains conservative with wave cleaning speeds which vary in space and time. This is accomplished by evolving the quantity $\\psi / c_h$ instead of $\\psi$. Doing so allows each particle to carry an individual wave cleaning speed, $c_h$, that can evolve in time without needing an explicit prescription for how it should evolve, preventing circumstances which we demonstrate could lead to runaway energy growth related to variable wave cleaning speeds. This modification requires only a minor adjustment to the cleaning equations and is trivial to adopt in existing codes. Finally, we demonstrate that our constrained hyperbolic/parabolic divergence cleaning algorithm, run for a large number of iterations, can reduce the divergence of the field to an arbitrarily small value, achieving $\

  15. Agent Standards Project

    Data.gov (United States)

    National Aeronautics and Space Administration — The innovation of the work herein proposed is the development of standards for software autonomous agents. These standards are essential to achieve software...

  16. Antibacterial Cleaning Products and Drug Resistance

    OpenAIRE

    Aiello, Allison E.; Marshall, Bonnie; Levy, Stuart B.; Della-Latta, Phyllis; Lin, Susan X.; Larson, Elaine

    2005-01-01

    We examined whether household use of antibacterial cleaning and hygiene products is an emerging risk factor for carriage of antimicrobial drug–resistant bacteria on hands of household members. Households (N = 224) were randomized to use of antibacterial or nonantibacterial cleaning and hygiene products for 1 year. Logistic regression was used to assess the influence of antibacterial product use in homes. Antibacterial product use did not lead to a significant increase in antimicrobial drug re...

  17. komunikace značky Clean & Clear

    OpenAIRE

    Nováková, Kateřina

    2009-01-01

    The objective of this thesis is to describe a communication campaign of Clean & Clear brand. A brand owned by Johnson & Johnson company specializing in cosmetics for teenage girls. Campaign is described into details, evaluated in terms of effectiveness of its communication tools by achieving marketing goals over a specified period of time. This thesis should confirm the suitability and effectivity of the communication mix applied for Clean & Clear brand in a specific enviroment of anti-acne c...

  18. Recent Advances in Precombustion Coal Cleaning Processes

    Institute of Scientific and Technical Information of China (English)

    Shiao-HungChiang; DaxinHe

    1994-01-01

    The mineral matter in coal constitutes a major impediment to the direct use of coal in power plants.A concerted effort has been mounted to reduce the ash/sulfur contents in product coal to meet the ever more stringent environmental regulations.In recent years,significant advances have taken place in fine coal cleaning technologies.A review of recent developments in aveanced physical,chemical and biological processes for deep-cleaning of fine coal is presented.

  19. State perspectives on clean coal technology deployment

    Energy Technology Data Exchange (ETDEWEB)

    Moreland, T. [State of Illinois Washington Office, Washington, DC (United States)

    1997-12-31

    State governments have been funding partners in the Clean Coal Technology program since its beginnings. Today, regulatory and market uncertainties and tight budgets have reduced state investment in energy R and D, but states have developed program initiatives in support of deployment. State officials think that the federal government must continue to support these technologies in the deployment phase. Discussions of national energy policy must include attention to the Clean Coal Technology program and its accomplishments.

  20. Clean and Highly Efficient Utilization of Coal

    Institute of Scientific and Technical Information of China (English)

    WANG Jianguo; YANG Li

    2011-01-01

    @@ Clean and highly efficient utilization of coal is an important scientific and technological issue.As the petroleum resource decreases but its consumption increases, all of the countries in the world have to face the big issue of sustainable development of energy and economy and protection of environment.Therefore, study on clean coal technology (CCT) has attracted much attention and become one of important themes of energy research.

  1. Brushless Cleaning of Solar Panels and Windows

    Science.gov (United States)

    Schneider, H. W.

    1982-01-01

    Machine proposed for cleaning solar panels and reflectors uses multiple vortexes of air, solvent, and water to remove dust and dirt. Uses no brushes that might abrade solar surfaces and thereby reduce efficiency. Machine can be readily automated and can be used on curved surfaces such as aparbolic reflectors as well as on flat ones. Cleaning fluids are recycled, so that large quantities of water and solvent are not needed.

  2. Knowledge spillovers from clean and dirty technologies

    OpenAIRE

    Dechezlepretre, Antoine; Martin, Ralf; Mohnen, Myra

    2014-01-01

    How much should governments subsidize the development of new clean technologies? We use patent citation data to investigate the relative intensity of knowledge spillovers in clean and dirty technologies in two technological fields: energy production and transportation. We introduce a new methodology that takes into account the whole history of patent citations to capture the indirect knowledge spillovers generated by patents. We find that conditional on a wide range of potential confounding f...

  3. 2013 Clean Energy Investments: Project Summaries

    OpenAIRE

    Asian Development Bank

    2014-01-01

    This report summarizes the investments in clean energy made by the operations departments of the AsianDevelopment Bank (ADB) in 2013, condensing information from project databases and formal reports in an easy-to-reference format. This report was prepared by ADB’s Clean Energy Program which provides the cohesive agenda that encompasses and guides ADB’s lending and non-lending assistance, initiatives, and plan of action for sustainable growth in Asia and the Pacific.

  4. Clean Cities Technical Assistance Project (Tiger Teams)

    Energy Technology Data Exchange (ETDEWEB)

    2016-02-01

    This two-page fact sheet describes Clean Cities' technical assistance (Tiger Teams) capabilities and projects, both completed and ongoing. Tiger Teams are a critical element of the Clean Cities program, providing on-the-ground consultation to help inform program strategies. The knowledge Tiger Team experts gain from these experiences often helps inform other alternative fuels activities, such as needed research, codes and standards revisions, and new training resources.

  5. Programming Service Oriented Agents

    OpenAIRE

    Hirsch, Benjamin; Konnerth, Thomas; Burkhardt, Michael; Albayrak, Sahin

    2010-01-01

    This paper introduces a programming language for service-oriented agents. JADL++ combines the ease of use of scripting-languages with a state-of-the-art service oriented approach which allows the seamless integration of web-services. Furthermore, the language includes OWL-based ontologies for semantic descriptions of data and services, thus allowing agents to make intelligent decisions about service calls.

  6. Clean Production Management of Breweries: the realities of implementing clean production management in Tsingtao Brewery

    OpenAIRE

    Wang, Chaonan

    2011-01-01

    In recent years,China's beer industry has rapid growth,but because of high energy consumption and high emissions in the production process, its environmental pollution became more serious and aroused concern. Beer companies must promote management of clean production in the pursuit of economic benefits while addressing the pollution problems. Comparing to leading markets, China’s beer industry practiced clean production at later stage, the level of clean production management is still lower t...

  7. Cleaning laser spark spectroscopy for online cleaning quality control method development

    Science.gov (United States)

    Mutin, T. Y.; Smirnov, V. N.; Veiko, V. P.; Volkov, S. A.

    2011-02-01

    This work is dedicated to spectroscopic investigations of laser spark during the laser cleaning process. The goal is to proof its analytical possibilities for chemical composition determination for online cleaning quality control. Photographic recordings of laser spark were performed to estimate its parameters. Fiber spectrometer was used to analyze the emission of cleaning process established with fiber laser. Conclusions have been made about fiber laser radiation usability for spectroscopic purpose.

  8. Outsourcing Housekeeping: An insight into two cleaning companies, SOL and N-Clean, in Helsinki, Finland

    OpenAIRE

    Hussain, Samra

    2016-01-01

    The purpose of the author was to find to get an insight into the cleaning companies, in Helsin-ki, Finland, which the hotel industry is using as an external supplier for their housekeeping de-partment. The author has looked into the cleaning companies training process for the cleaning staff, employee demographics, quality control and process of handling complaints. The ad-vantages and disadvantages of outsourcing housekeeping in the hotel sector are also investi-gated. The research method...

  9. Cleaning of GaN(2110) surfaces

    International Nuclear Information System (INIS)

    The cleaning of GaN(2110) surfaces was investigated by x-ray photoelectron spectroscopy, scanning tunneling microscopy, and low-energy electron diffraction. Two different two-step cleaning methods, performed under ultrahigh-vacuum conditions, were carried out and compared. The first cleaning step of both methods is thermal degassing. The second step is either the deposition of metallic gallium followed by redesorption or an exposure to active nitrogen from a radio frequency nitrogen plasma source. Upon storage in a glovebox (N2 atmosphere) and transfer to ultrahigh vacuum under dry nitrogen, carbon and oxygen were identified as the major contaminants. A significant decrease in oxygen and carbon was achieved by thermal degassing at 750 deg. C under ultrahigh-vacuum conditions. By applying a subsequent Ga deposition/redesorption or N2-plasma cleaning step, a further reduction in oxygen and carbon could be achieved. In comparison, the Ga deposition/redesorption cleaning showed a better performance in oxygen removal, whereas the N2 plasma exhibits a better efficiency in carbon removal. Furthermore scanning tunneling microscopy and low-energy electron diffraction investigations showed a drastic improvement of the morphology and atomic structure of the clean surfaces in contrast to the sample surfaces after N2 storage and transfer.

  10. Clean fuel for demanding environmental markets

    Energy Technology Data Exchange (ETDEWEB)

    Josewicz, W.; Natschke, D.E. [Acurex Environmental Corp., Research Triangle Park, NC (United States)

    1995-12-31

    Acurex Environmental Corporation is bringing Clean Fuel to the environmentally demand Krakow market, through the cooperative agreement with the U.S. Department of Energy. Clean fuel is a proprietary clean burning coal-based energy source intended for use in stoves and hand stoked boilers. Clean Fuel is a home heating fuel that is similar in form and function to raw coal, but is more environmentally friendly and lower in cost. The heating value of Clean Fuel is 24,45 kJ/kg. Extensive sets of confirmation runs were conducted in the Academy of Mining and Metallurgy in the Krakow laboratories. It demonstrated up to 54 percent reduction of particulate matter emission, up to 35 percent reduction of total hydrocarbon emissions. Most importantly, polycyclic aromatic hydrocarbons (toxic and carcinogens compounds) emissions were reduced by up to 85 percent, depending on species measured. The above comparison was made against premium chunk coal that is currently available in Krakow for approximately $83 to 93/ton. Clean Fuel will be made available in Krakow at a price approximately 10 percent lower than that of the premium chunk coal.

  11. Cleaning of GaN(2110) surfaces

    Energy Technology Data Exchange (ETDEWEB)

    Schulz, Ch.; Kuhr, S.; Geffers, H.; Schmidt, Th.; Flege, J. I.; Aschenbrenner, T.; Hommel, D.; Falta, J. [Institute of Solid State Physics, University Bremen, P.O. Box 330440, Bremen 28334 (Germany)

    2011-01-15

    The cleaning of GaN(2110) surfaces was investigated by x-ray photoelectron spectroscopy, scanning tunneling microscopy, and low-energy electron diffraction. Two different two-step cleaning methods, performed under ultrahigh-vacuum conditions, were carried out and compared. The first cleaning step of both methods is thermal degassing. The second step is either the deposition of metallic gallium followed by redesorption or an exposure to active nitrogen from a radio frequency nitrogen plasma source. Upon storage in a glovebox (N{sub 2} atmosphere) and transfer to ultrahigh vacuum under dry nitrogen, carbon and oxygen were identified as the major contaminants. A significant decrease in oxygen and carbon was achieved by thermal degassing at 750 deg. C under ultrahigh-vacuum conditions. By applying a subsequent Ga deposition/redesorption or N{sub 2}-plasma cleaning step, a further reduction in oxygen and carbon could be achieved. In comparison, the Ga deposition/redesorption cleaning showed a better performance in oxygen removal, whereas the N{sub 2} plasma exhibits a better efficiency in carbon removal. Furthermore scanning tunneling microscopy and low-energy electron diffraction investigations showed a drastic improvement of the morphology and atomic structure of the clean surfaces in contrast to the sample surfaces after N{sub 2} storage and transfer.

  12. Sonochemical cleaning efficiencies in dental instruments

    Science.gov (United States)

    Tiong, T. Joyce; Walmsley, A. Damien; Price, Gareth J.

    2012-05-01

    Ultrasound has been widely used for cleaning purposes in a variety of situations, including in dental practice. Cleaning is achieved through a combination of acoustically driven streaming effects and sonochemical effects arising from the production of inertial cavitation in a liquid. In our work, various dental instruments used for endodontic (root canal) treatment have been evaluated for their efficiency in producing sonochemical effects in an in-vitro cleaning environment. The areas where cavitation was produced were mapped by monitoring chemiluminescence from luminol solutions and this was correlated with their cleaning efficiencies - assessed by the ability to bleach a dye, to form an emulsion by mixing immiscible components and also to remove ink from a glass surface. The results showed good correlation (Pearson's coefficient > 0.9) between the cavitation and cleaning efficiencies, suggesting that the former plays an important role in cleaning. The methods developed and the results will be beneficial in endodontics research in order to optimise future root canal instruments and treatments.

  13. What is Clean Cities? October 2011 (Brochure)

    Energy Technology Data Exchange (ETDEWEB)

    2011-10-01

    Brochure describes the Clean Cities program and includes the contact information for its 85 coalitions. Sponsored by the U.S. Department of Energy's (DOE) Vehicle Technologies Program (VTP), Clean Cities is a government-industry partnership that reduces petroleum consumption in the transportation sector. Clean Cities contributes to the energy, environmental, and economic security of the United States by supporting local decisions to reduce our dependence on imported petroleum. Established in 1993 in response to the Energy Policy Act (EPAct) of 1992, the partnership provides tools and resources for voluntary, community-centered programs to reduce consumption of petroleum-based fuels. In nearly 100 coalitions, government agencies and private companies voluntarily come together under the umbrella of Clean Cities. The partnership helps all parties identify mutual interests and meet the objectives of reducing the use of petroleum, developing regional economic opportunities, and improving air quality. Clean Cities deploys technologies and practices developed by VTP. These include idle-reduction equipment, electric-drive vehicles, fuel economy measures, and renewable and alternative fuels, such as natural gas, liquefied petroleum gas (propane), electricity, hydrogen, biofuels, and biogas. Idle-reduction equipment is targeted primarily to buses and heavy-duty trucks, which use more than 2 billion gallons of fuel every year in the United States while idling. Clean Cities fuel economy measures include public education on vehicle choice and fuel-efficient driving practices.

  14. Fibrous Filter to Protect Building Environments from Polluting Agents: A Review

    Science.gov (United States)

    Chavhan, Md. Vaseem; Mukhopadhyay, Arunangshu

    2016-04-01

    This paper discusses the use of fibrous filter to protect the building environments from air born polluting agents and especially of concern chemical, biological and radiological agents. Air-filtration includes removal of particulate from air and toxic gases from air. In air filtration, particulate which are mostly biological and radioactive types of agents can be removed by using mechanical and electrostatic filters. Some biological agents, which cannot be removed by air filtration alone, special techniques like antimicrobial finish, UV germicides, coated filters etc. are required. Biocide agent can be added into the fibre itself by grafting reaction to impart antimicrobial activity. Chemical agents like toxic gases can be removed by integrating adsorbents and sorbents in filters or by fibre modifications. It is also possible to impart catalytic conversion properties into the fibre to remove volatile gasous. Radioactive agents can be removed by particulate filter if present in the form of aerosol or by gas cleaning by the use of specific fibre impregnate.

  15. The AREVA customized chemical cleaning C3-concept as part of the steam generator asset management

    International Nuclear Information System (INIS)

    with various chemical cleaning methods and their world wide applications AREVA has developed the 'C3' Customized Chemical Cleaning concept. This concept covers the entire range of steam generator chemical cleaning. With this approach, also specific problems like removal of sludge piles from tube sheet can be adequately addressed. At European PWRs the above presented overall approach was applied successfully in 2009 and 2010. Prior to the chemical cleaning the steam generator status was investigated and evaluated in a common approach of all relevant AREVA departments. For example, as a result of one plant specific evaluation, a hard sludge problem was identified combined with denting indications mainly on the tube sheet. Based on this SG assessment and the expected amount of deposits an individually tailored and site specific cleaning approach was developed in close cooperation with the plant operator. Prior to the chemical cleaning an inner bundle lancing was performed to mechanically weaken the hard deposits, which allows deep penetration of the cleaning agent into the deposits. The chemical cleaning methodology for this site specific SG problem was the AREVA DART HT process selected from the C3 toolbox. The DART HT process allows an efficient removal of hard deposits, while keeping the average corrosion below 50 μm. After the chemical cleaning a subsequent tube sheet lancing was performed, effectively removing the chemically softened deposits. This approach removed the targeted amount of deposits, thus eliminating the hard sludge denting of tubes at the tube sheet. This paper describes the joint approach of the plant operator and AREVA for the on-site chemical cleaning to the improve steam generator condition. (authors)

  16. 9 CFR 83.7 - Shipping containers; cleaning and disinfection.

    Science.gov (United States)

    2010-01-01

    ... 9 Animals and Animal Products 1 2010-01-01 2010-01-01 false Shipping containers; cleaning and... HEMORRHAGIC SEPTICEMIA § 83.7 Shipping containers; cleaning and disinfection. (a) All live fish that are to be... been cleaned and disinfected. (1) Cleaning and disinfection of shipping containers must be monitored...

  17. Clean Energy Solutions Center Services (Arabic Translation) (Fact Sheet)

    Energy Technology Data Exchange (ETDEWEB)

    2014-06-01

    This is the Arabic translation of the Clean Energy Solutions Center Services fact sheet. The Clean Energy Solutions Center (Solutions Center) helps governments, advisors and analysts create policies and programs that advance the deployment of clean energy technologies. The Solutions Center partners with international organizations to provide online training, expert assistance, and technical resources on clean energy policy.

  18. Biological Warfare Agents

    Directory of Open Access Journals (Sweden)

    Dev Vrat Kamboj

    2006-10-01

    Full Text Available There is a long historic record of use of biological warfare (BW agents by warring countriesagainst their enemies. However, the frequency of their use has increased since the beginningof the twentieth century. World war I witnessed the use of anthrax agent against human beingsand animals by Germans, followed by large-scale field trials by Japanese against war prisonersand Chinese population during world war II. Ironically, research and development in biologicalwarfare agents increased tremendously after the Geneva Protocol, signed in 1925, because ofits drawbacks which were overcome by Biological and Toxin Weapons Convention (BTWC in1972. Biological warfare programme took back seat after the 1972 convention but biologicalagents regained their importance after the bioterrorist attacks of anthrax powder in 2001. In thelight of these attacks, many of which turned out to be hoax, general awareness is required aboutbiological warfare agents that can be used against them. This review has been written highlightingimportant biological warfare agents, diseases caused by them, possible therapies and otherprotection measures.

  19. A color test for the convenient identification of an ingested surface activating agent.

    Science.gov (United States)

    Kinoshita, Hiroshi; Tanaka, Naoko; Jamal, Mostofa; Takakura, Ayaka; Kumihashi, Mitsuru; Tobiume, Tadashi; Tsutsui, Kunihiko; Ameno, Kiyoshi

    2015-01-01

    Color tests are easy, simple and inexpensive methods for the qualitative identification of chemicals. A color test was applied to the stomach contents of a forensic autopsy case. The result of the test, using bromophenol blue reagent, indicated the ingestion of a commercial cleaning product containing a cationic surface activating agent. Our findings suggest that forensic investigators should consider the additives used in commercial chemical products, such as surface activating agents, when determining the cause of death. PMID:26419519

  20. Plasma Sterilization of Poly Lactic Acid Ultrasound Contrast Agents: Surface Modification and Implications for Drug Delivery

    OpenAIRE

    Eisenbrey, John R.; Hsu, Jennifer; Wheatley, Margaret A.

    2009-01-01

    Poly lactic acid (PLA) ultrasound contrast agents (CA) have been previously developed in our laboratory for ultrasound (US) imaging, as well as surface coated with doxorubicin to create a potential targeted platform of chemotherapeutic delivery using focused US. However, we have previously found it impossible to sterilize these agents while at the same time maintaining their acoustic properties, a task that would probably require fabrication within a clean facility. The purpose of this paper ...

  1. TRACKING CLEAN UP AT HANFORD

    International Nuclear Information System (INIS)

    The Hanford Federal Facility Agreement and Consent Order, known as the ''Tri-Party Agreement'' (TPA), is a legally binding agreement among the US Department of Energy (DOE), The Washington State Department of Ecology, and the US Environmental Protection Agency (EPA) for cleaning up the Hanford Site. Established in the 1940s to produce material for nuclear weapons as part of the Manhattan Project, Hanford is often referred to as the world's large environmental cleanup project. The Site covers more than 580 square miles in a relatively remote region of southeastern Washington state in the US. The production of nuclear materials at Hanford has left a legacy of tremendous proportions in terms of hazardous and radioactive waste. From a waste-management point of view, the task is enormous: 1700 waste sites; 450 billion gallons of liquid waste; 70 billion gallons of contaminated groundwater; 53 million gallons of tank waste; 9 reactors; 5 million cubic yards of contaminated soil; 22 thousand drums of mixed waste; 2.3 tons of spent nuclear fuel; and 17.8 metric tons of plutonium-bearing material and this is just a partial listing. The agreement requires that DOE provide the results of analytical laboratory and non-laboratory tests/readings to the lead regulatory agency to help guide then in making decisions. The agreement also calls for each signatory to preserve--for at least ten years after the Agreement has ended--all of the records in it, or its contractors, possession related to sampling, analysis, investigations, and monitoring conducted. The Action Plan that supports the TPA requires that Ecology and EPA have access to all data that is relevant to work performed, or to be performed, under the Agreement. Further, the Action Plan specifies two additional requirements: (1) that EPA, Ecology and their respective contractor staffs have access to all the information electronically, and (2) that the databases are accessible to, and used by, all personnel doing TPA

  2. Surface properties and self-cleaning ability of the fluorinated acrylate coatings modified with dodecafluoroheptyl methacrylate through two adding ways

    Energy Technology Data Exchange (ETDEWEB)

    Yang, Xin [Key Laboratory of Aerospace Advanced Materials and Performance (Ministry of Education), School of Material Science and Engineering, Beihang University, Beijing 100191 (China); Zhu, Liqun, E-mail: zhulq@buaa.edu.cn [Key Laboratory of Aerospace Advanced Materials and Performance (Ministry of Education), School of Material Science and Engineering, Beihang University, Beijing 100191 (China); Zhang, Yang [Key Laboratory of Aerospace Advanced Materials and Performance (Ministry of Education), School of Material Science and Engineering, Beihang University, Beijing 100191 (China); Chen, Yichi [Key Laboratory of Bio-Inspired Smart Interfacial Science and Technology of Ministry of Education, School of Chemistry and Environment, Beihang University, Beijing 100191 (China); Bao, Baiqing; Xu, Jinlong; Zhou, Weiwei [Jiangsu Baihe Coatings Co., Ltd, Changzhou 213136 (China)

    2014-03-01

    Highlights: • A self-cleaning test is used to evaluate the self-cleaning ability of coatings. • Adding way of fluorine monomer has an influence on the self-cleaning ability. • The fluorine content of coating surface increases by changing modification method. • High contact angles and low sliding angles are advantageous for self-cleaning. • The self-cleaning ability of coatings is analyzed after scrubbing. - Abstract: The fluorine-modified acrylate resin was synthesized by solution radical polymerization using dodecafluoroheptyl methacrylate (DFMA) and other acrylate monomers. The same weight of DFMA was added into the reaction through two different ways: (1) adding DFMA as bottom monomer (AFBM); (2) adding DFMA drop by drop (AFDD). The different coatings were prepared by blending the fluorine-modified acrylate resin with the curing agent. Compared with AFDD coating, the AFBM coating exhibited better self-cleaning ability which was confirmed by the self-cleaning test through measuring the specular gloss of coatings before contamination and after water droplets flushing. The fluorine content at the surface of AFBM coating increased from 15.1 at.% to 23.1 at.%, while the water contact angles increased by 8° and the sliding angles decreased obviously. Furthermore, the contact angles and self-cleaning ability of the coatings prepared with DFMA through two adding ways both decreased after scrubbing by wet cotton because of the decrease of the surface fluorine atom content. It could be concluded that high contact angles and low sliding angles were advantageous for coatings to obtain excellent self-cleaning ability.

  3. The Political Economy of Clean Air Legislation. An Analysis of Voting in the U.S. Senate on Amendments to the 1990 Clean Air Act

    International Nuclear Information System (INIS)

    Much research in political science and economics has attempted to explain voting patterns among members of legislative bodies. In this paper we extend the existing analysis in three ways. First, we address the subject of voting on air quality regulation by the U.S. Senate. A subject of great importance and significance, such votes have not previously been the focus of much empirical investigation. Second, we develop an arguably more correct and effective methodology for measuring and understanding the ideological preferences of individual Senators, as revealed by their voting patterns on 1990 amendments to the Clean Air Act. Third, we apply the minimum chi-square methodology for estimating the determinants of Senator voting patterns on the issue. In Section 2, the economic theory of regulation is elaborated as it is specifically related to 1990 senate voting on amendments to the Clean Air Act. In Section 3, we provide a brief literature review, focusing on the principal-agent model and how voting patterns are influenced by campaign contributions, constituent socio-economic characteristics, and individual legislator ideology. In Section 4 we present a very simple model of the principal-agent relationship which underlies legislative voting behavior. In this section (supplemented by information in an appendix) we introduce a new methodology for creating a proxy variable to represent legislator ideology, comparing the new method with those previously used. Section 5 provides a chronological background on clean air legislation, and Section 6 discusses the data and proxy variables used for the empirical estimations. Section 7 contains a presentation and evaluation of three empirical techniques, including one not previously used, the minimum chi-square method which, we argue, is both appropriate and easily interpretable. This claim is based upon the fact that the dependent variable, SCORE, is neither continuous nor dichotomous, but ordered and categorical, constructed

  4. Agent Oriented Programming进展%Advances in Agent Oriented Programming

    Institute of Scientific and Technical Information of China (English)

    王一川; 石纯一

    2002-01-01

    Agent-oriented programming (AOP) is a framework to develop agents, and it aims to link the gap betweentheory and practical in agent research. The core of an AOP framework is its language and semantics. In this paper,we propose the necessary properties which agents should have, and then give a summary and analysis about differentAOP languages based on these properties.

  5. Developing Enculturated Agents

    DEFF Research Database (Denmark)

    Rehm, Matthias

    2010-01-01

    on our cultural profiles that provide us with heuristics of behavior and interpretation. Thus, integrating cultural aspects of communicative behaviors in virtual agents and thus enculturating such systems seems to be inevitable. But culture is a multi-defined domain and thus a number of pitfalls arise......Embodied Conversational Agents (ECAs) are complex multimodal systems with rich verbal and nonverbal repertoires. There human-like appearance raises severe expectations regarding natural communicative behaviors on the side of the user. But what is regarded as “natural” is to a large degree dependent...... that have to be avoided in the endeavor. This chapter presents some of the pitfalls for enculturating interactive systems and presents strategies on how to avoid these pitfalls in relation to the standard development process of Embodied Conversational Agents....

  6. Ultrasonic cleaning of 3D printed objects and Cleaning Challenge Devices

    NARCIS (Netherlands)

    Verhaagen, Bram; Zanderink, Thijs; Fernandez Rivas, David

    2016-01-01

    We report our experiences in the evaluation of ultrasonic cleaning processes of objects made with additive manufacturing techniques, specifically three-dimensional (3D) printers. These objects need to be cleaned of support material added during the printing process. The support material can be remov

  7. Emerging forward osmosis (FO) technologies and challenges ahead for clean water and clean energy applications

    KAUST Repository

    Chung, Tai-Shung

    2012-08-01

    The purpose of this short review is to share our understanding and perspectives with the chemical, environmental, water and osmotic power communities on FO processes in order to conduct meaningful R & D and develop effective and sustainable FO technologies for clean water and clean energy. © 2012 Elsevier Ltd. All rights reserved.

  8. Agents unleashed a public domain look at agent technology

    CERN Document Server

    Wayner, Peter

    1995-01-01

    Agents Unleashed: A Public Domain Look at Agent Technology covers details of building a secure agent realm. The book discusses the technology for creating seamlessly integrated networks that allow programs to move from machine to machine without leaving a trail of havoc; as well as the technical details of how an agent will move through the network, prove its identity, and execute its code without endangering the host. The text also describes the organization of the host's work processing an agent; error messages, bad agent expulsion, and errors in XLISP-agents; and the simulators of errors, f

  9. 76 FR 16646 - Circadian, Inc., Clean Energy Combustion, Inc. (n/k/a Clean Energy Combustion Systems, Inc...

    Science.gov (United States)

    2011-03-24

    ... From the Federal Register Online via the Government Publishing Office SECURITIES AND EXCHANGE COMMISSION Circadian, Inc., Clean Energy Combustion, Inc. (n/k/a Clean Energy Combustion Systems, Inc... concerning the securities of Clean Energy Combustion, Inc. (n/k/a Clean Energy Combustion Systems,...

  10. 75 FR 11560 - Notice of Lodging of Consent Decree Under the Clean Water Act and Clean Air Act

    Science.gov (United States)

    2010-03-11

    ... From the Federal Register Online via the Government Publishing Office DEPARTMENT OF JUSTICE Notice of Lodging of Consent Decree Under the Clean Water Act and Clean Air Act Notice is hereby given that... violations of the Clean Water Act, 33 U.S.C. 1251 et seq., and the Clean Air Act, 42 U.S.C. 7401 et seq....

  11. 76 FR 40728 - Clean Air Act Advisory Committee (CAAAC); Request for Nominations for 2011 Clean Air Excellence...

    Science.gov (United States)

    2011-07-11

    ... AGENCY Clean Air Act Advisory Committee (CAAAC); Request for Nominations for 2011 Clean Air Excellence Awards Program AGENCY: Environmental Protection Agency (EPA). ACTION: Request for nominations for Clean Air Excellence Awards. ] SUMMARY: EPA established the Clean Air Excellence Awards Program in...

  12. 75 FR 35025 - Clean Air Act Advisory Committee (CAAAC); Request for Nominations for 2010 Clean Air Excellence...

    Science.gov (United States)

    2010-06-21

    ... AGENCY Clean Air Act Advisory Committee (CAAAC); Request for Nominations for 2010 Clean Air Excellence Awards Program AGENCY: Environmental Protection Agency (EPA). ACTION: Request for nominations for Clean Air Excellence Awards. SUMMARY: EPA established the Clean Air Excellence Awards Program in...

  13. 78 FR 70960 - Notice of Lodging of Consent Decree Under the Clean Air Act, Clean Water Act, and the Resource...

    Science.gov (United States)

    2013-11-27

    ... of Lodging of Consent Decree Under the Clean Air Act, Clean Water Act, and the Resource Conservation... the United States and the State of Illinois under the Clean Air Act, the Clean Water Act, the Resource... and Natural Resource Division. BILLING CODE 4410-15-P...

  14. Dynamic self-cleaning in gecko setae via digital hyperextension

    OpenAIRE

    Hu, Shihao; Lopez, Stephanie; Niewiarowski, Peter H.; Xia, Zhenhai

    2012-01-01

    Gecko toe pads show strong adhesion on various surfaces yet remain remarkably clean around everyday contaminants. An understanding of how geckos clean their toe pads while being in motion is essential for the elucidation of animal behaviours as well as the design of biomimetic devices with optimal performance. Here, we test the self-cleaning of geckos during locomotion. We provide, to our knowledge, the first evidence that geckos clean their feet through a unique dynamic self-cleaning mechani...

  15. Bayesian Data Cleaning for Web Data

    CERN Document Server

    Hu, Yuheng; Chen, Yi; Kambhampati, Subbarao

    2012-01-01

    Data Cleaning is a long standing problem, which is growing in importance with the mass of uncurated web data. State of the art approaches for handling inconsistent data are systems that learn and use conditional functional dependencies (CFDs) to rectify data. These methods learn data patterns--CFDs--from a clean sample of the data and use them to rectify the dirty/inconsistent data. While getting a clean training sample is feasible in enterprise data scenarios, it is infeasible in web databases where there is no separate curated data. CFD based methods are unfortunately particularly sensitive to noise; we will empirically demonstrate that the number of CFDs learned falls quite drastically with even a small amount of noise. In order to overcome this limitation, we propose a fully probabilistic framework for cleaning data. Our approach involves learning both the generative and error (corruption) models of the data and using them to clean the data. For generative models, we learn Bayes networks from the data. Fo...

  16. Chemical cleaning restores metal filter performance

    International Nuclear Information System (INIS)

    Southern Metal Processing has developed a means of cleaning and recertifying metal filters used in condensate polishing, applications which yields pressure drop readings and on-stream run times that are virtually identical to new filters. Initially, a chemical cleaning process is carried out, designed to remove all ion exchange resin as well as iron oxide residue from the porosity of the filter media. This process is compatible with all stainless steel filters now available on the market. In addition, certain non-metallic filters previously used as disposables can also be cleaned using this process. Tests have shown that chemical cleaning designed to remove iron oxide only will result in high delta P readings, due to the continued presence of the various ion exchange resins. These resins are most effectively removed by a 1-2h dwell time in a 700-750oF environment. The remaining iron oxide can then be removed by a variety of non-corrosive acids and proper flushing techniques. After cleaning, each filter is subjected to a battery of tests to confirm the level of cleanliness and the integrity of the media at a given micron rating. While incidents of small pinholes or cracks in the media are very rare, such a problem can quickly worsen when the filter is exposed to the filtering and blowback cycles during a normal run. (author)

  17. Source terms in relation to air cleaning

    International Nuclear Information System (INIS)

    There are two sets of source terms for consideration in air cleaning, those for routine releases and those for accident releases. With about 1000 reactor years of commercial operating experience in the US done, there is an excellent data base for routine and expected transient releases. Specifications for air cleaning can be based on this body of experience with confidence. Specifications for air cleaning in accident situations is another matter. Recent investigations of severe accident behavior are offering a new basis for source terms and air cleaning specifications. Reports by many experts in the field describe an accident environment notably different from previous models. It is an atmosphere heavy with aerosols, both radioactive and inert. Temperatures are sometimes very high; radioiodine is typically in the form of cesium iodide aerosol particles; other nuclides, such as tellurium, are also important aerosols. Some of the present air cleaning requirements may be very important in light of these new accident behavior models. Others may be wasteful or even counterproductive. The use of the new data on accident behavior models to reevaluate requirements promptly is discussed

  18. Northwest Region Clean Energy Application Center

    Energy Technology Data Exchange (ETDEWEB)

    Sjoding, David

    2013-09-30

    The main objective of the Northwest Clean Energy Application Center (NW CEAC) is to promote and support implementation of clean energy technologies. These technologies include combined heat and power (CHP), district energy, waste heat recovery with a primary focus on waste heat to power, and other related clean energy systems such as stationary fuel cell CHP systems. The northwest states include AK, ID, MT, OR, and WA. The key aim/outcome of the Center is to promote and support implementation of clean energy projects. Implemented projects result in a number of benefits including increased energy efficiency, renewable energy development (when using opportunity fuels), reduced carbon emissions, improved facility economics helping to preserve jobs, and reduced criteria pollutants calculated on an output-based emissions basis. Specific objectives performed by the NW CEAC fall within the following five broad promotion and support categories: 1) Center management and planning including database support; 2) Education and Outreach including plan development, website, target market workshops, and education/outreach materials development 3) Identification and provision of screening assessments & feasibility studies as funded by the facility or occasionally further support of Potential High Impact Projects; 4) Project implementation assistance/trouble shooting; and 5) Development of a supportive clean energy policy and initiative/financing framework.

  19. El agente encubierto

    OpenAIRE

    Anaya Marcos, María del Carmen

    2015-01-01

    [ES] El trabajo versa sobre la figura del agente encubierto. Debemos enmarcar tal medida de investigación dentro del ámbito de la criminalidad organizada. Actualmente, estamos asistiendo a una proliferación de la delincuencia organizada. La sociedad ha evolucionado, y con ella la delincuencia. Fruto de tal evolución fue necesario incluir en nuestra Ley de Enjuiciamiento Criminal medidas extraordinarias de investigación, y una de ellas es el agente encubierto. Se trata de una medida muy polémi...

  20. Cleaning of South African coal using a compound dry cleaning apparatus

    Institute of Scientific and Technical Information of China (English)

    Li Haibin; Luo Zhenfu; Zhao Yuemin; Wu Wanchang; Zhang Cuiyu; Dai Ningning

    2011-01-01

    The compound dry cleaning principle is briefly described. A beneficiation test on South African coal was conducted using a model compound dry cleaning apparatus. Excellent results were obtained and the optimum operating parameters were determined. They are: an amplitude of 3.0 ram, a motor frequency of 47.5 Hz, an air volume of 50%, a transverse angle of 7°, and a longitudinal angle of -2°. These conditions yield a clean coal containing 11% ash and a coal production of 75%. The organic efficiency, η, is 95.86%. These results show that the South African coal can be separated effectively by compound dry cleaning, which will popularize the compound dry cleaning method.

  1. Method of and apparatus for cleaning garments and soft goods contaminated with nuclear, chemical and/or biological contaminants

    International Nuclear Information System (INIS)

    A method is described for decontaminating garments, soft good or mixtures thereof contaminated with radioactive particulates, toxin, chemical, and biological contaminants comprising the steps of: (a) depositing contaminated garments, soft goods or mixtures thereof in a cleaning drum; (b) charging the drum with a cleaning solvent in which the chemical contaminants are soluble; (c) agitating the drum during a wash cycle to separate radioactive, toxin, biological particulate matter of mixtures thereof from the garments; (d) draining the drum of the dry cleaning solvent which contains suspended particulate contaminants and dissolved chemical contaminants; (e) contacting the drained solvent with both a neutralizing agent and an oxidizing agent, the neutralizing agent being selected from the group consisting of sodium hydroxide, potassium hydroxide and mixtures thereof and having a concentration greater than one (1.0) normal; (f) rinsing the garments, soft goods or mixtures thereof by circulating clean solvent from a solvent tank through the drum thereby effecting additional removal and flushing of particulate and chemical contaminants; (g) filtering the circulated solvent to remove the particulate material suspended in the solvent prior to addition to the drum; and (h) preferentially adsorbing the chemical contaminants dissolved in the circulated solvent prior to addition to the drum

  2. [Survey of methods of cleaning, decontamination, disinfection and sterilization in dental health services in tropical areas].

    Science.gov (United States)

    Clapeau, G; Decroix, B; Bakayoko-Ly, R; Varenne, B; Dosso-Hien, D; Decroix, M O

    1997-01-01

    hygiene standards despite difficult practice conditions, exacerbated by supply problems. In all applications, hygiene involves a succession of closely-related, logical steps, which form an asepsis chain aimed at preventing the transmission of infection. Our survey shows that fundamental elements of hygiene require attention to achieve this aim. The cleaning, disinfection and sterilizing of floor surfaces and equipment should be improved and more widespread use made of disposable items. It is important to define the hygiene level required for particular treatments, taking into account the oral and dental micro flora and whether the equipment has been decontaminated, disinfected or sterilized. A piece of equipment is decontaminated if it has been mechanically cleaned and decontaminated. It is disinfected if these steps are followed by rinsing with sterile water, drying and conditioning. An item is described as sterilized if it is cleaned, decontaminated, rinsed, dried, conditioned and then sterilized. We found that a wide variety of chemicals were used to clean hands, surfaces and equipment. The nature and appropriate methods of use of these chemicals were not widely known. Understanding the chemical composition of these chemicals makes it possible to classify them into cleaning agents, detergents, decontaminating agents and disinfectants. The definition, choice and use of antiseptics and disinfectants should be strictly controlled. It is also vital that single-use disposable items are used only once and are never reused. Hygiene in the dental surgery is a chain of processes aimed at protecting the patient and the medical staff. There are many links in the chain, involving floor and surface hygiene, hand washing by dentists and dental assistants, washing of surgery linen and treatment of equipment. Dental practitioners should continually focus on ensuring that the chain of hygiene procedures is not broken, in their own interests as well as in those of their patients.

  3. Programming multi-agent systems

    NARCIS (Netherlands)

    Dastani, Mehdi

    2015-01-01

    With the significant advances in the area of autonomous agents and multi-agent systems in the last decade, promising technologies for the development and engineering of multi-agent systems have emerged. The result is a variety of agent-oriented programming languages, development frameworks, executio

  4. Software Agent Techniques in Design

    DEFF Research Database (Denmark)

    Hartvig, Susanne C

    1998-01-01

    This paper briefly presents studies of software agent techniques and outline aspects of these which can be applied in design agents in integrated civil engineering design environments.......This paper briefly presents studies of software agent techniques and outline aspects of these which can be applied in design agents in integrated civil engineering design environments....

  5. Trading Agents for Roaming Users

    OpenAIRE

    Boman, Magnus; Bylund, Markus; Espinoza, Fredrik; Danielson, Mats; Lyback, David

    2002-01-01

    Some roaming users need services to manipulate autonomous processes. Trading agents running on agent trade servers are used as a case in point. We present a solution that provides the agent owners with means to upkeeping their desktop environment, and maintaining their agent trade server processes, via a briefcase service.

  6. The macroecology of marine cleaning mutualisms.

    Science.gov (United States)

    Floeter, Sergio R; Vázquez, Diego P; Grutter, Alexandra S

    2007-01-01

    1. Marine cleaning mutualisms generally involve small fish or shrimps removing ectoparasites and other material from cooperating 'client' fish. We evaluate the role of fish abundance, body size and behaviour as determinants of interactions with cleaning mutualists. 2. Data come from eight reef locations in Brazil, the Caribbean, the Mediterranean and Australia. 3. We conducted a meta-analysis of client-cleaner interactions involving 11 cleaner and 221 client species. 4. There was a strong, positive effect of client abundance on cleaning frequency, but only a weak, negative effect of client body size. These effects were modulated by client trophic group and social behaviour. 5. This study adds to a growing body of evidence suggesting a central role of species abundance in structuring species interactions.

  7. Nonlinear temporal pulse cleaning techniques and application

    Institute of Scientific and Technical Information of China (English)

    Yi; Xu; Jianzhou; Wang; Yansui; Huang; Yanyan; Li; Xiaomin; Lu; Yuxin; Leng

    2013-01-01

    Two different pulse cleaning techniques for ultra-high contrast laser systems are comparably analysed in this work.The first pulse cleaning technique is based on noncollinear femtosecond optical-parametric amplification(NOPA)and second-harmonic generation(SHG)processes.The other is based on cross-polarized wave(XPW)generation.With a double chirped pulse amplifier(double-CPA)scheme,although temporal contrast enhancement in a high-intensity femtosecond Ti:sapphire chirped pulse amplification(CPA)laser system can be achieved based on both of the techniques,the two different pulse cleaning techniques still have their own advantages and are suitable for different contrast enhancement requirements of different laser systems.

  8. Plasma cleaning of beryllium coated mirrors

    Science.gov (United States)

    Moser, L.; Marot, L.; Steiner, R.; Newman, M.; Widdowson, A.; Ivanova, D.; Likonen, J.; Petersson, P.; Pintsuk, G.; Rubel, M.; Meyer, E.; Contributors, JET

    2016-02-01

    Cleaning systems of metallic first mirrors are needed in more than 20 optical diagnostic systems from ITER to avoid reflectivity losses. Currently, plasma sputtering is considered as one of the most promising techniques to remove deposits coming from the main wall (mainly beryllium and tungsten). This work presents the results of plasma cleaning of rhodium and molybdenum mirrors exposed in JET-ILW and contaminated with typical tokamak elements (including beryllium and tungsten). Using radio frequency (13.56 MHz) argon or helium plasma, the removal of mixed layers was demonstrated and mirror reflectivity improved towards initial values. The cleaning was evaluated by performing reflectivity measurements, scanning electron microscopy, x-ray photoelectron spectroscopy and ion beam analysis.

  9. Second annual clean coal technology conference: Proceedings

    International Nuclear Information System (INIS)

    The Second Annual Clean Coal Technology Conference was held at Atlanta, Georgia, September 7--9, 1993. The Conference, cosponsored by the US Department of Energy (USDOE) and the Southern States Energy Board (SSEB), seeks to examine the status and role of the Clean Coal Technology Demonstration Program (CCTDP) and its projects. The Program is reviewed within the larger context of environmental needs, sustained economic growth, world markets, user performance requirements and supplier commercialization activities. This will be accomplished through in-depth review and discussion of factors affecting domestic and international markets for clean coal technology, the environmental considerations in commercial deployment, the current status of projects, and the timing and effectiveness of transfer of data from these projects to potential users, suppliers, financing entities, regulators, the interested environmental community and the public. Individual papers have been entered separately

  10. Alpha Removal Process Filter Cleaning Recommendations

    International Nuclear Information System (INIS)

    The Savannah River Site (SRS) is developing a process to treat radioactive waste that is low in cesium-137, but high in strontium-90, plutonium, uranium, and neptunium. Defense Waste Processing Facility (DWPF) personnel asked Savannah River Technology Center (SRTC) personnel to provide recommendations for chemically cleaning the Alpha Removal Process filters. The authors reviewed previous SRTC filter cleaning experience with bench-scale radioactive filters and pilot-scale simulant filters from tests with simulated and actual waste. From reviewing the previous filter cleaning data and assuming the heel in the 512-S filtration system is 85 gallons or less, the authors recommendations and approach to the inquiry are contained in this report

  11. Solar-Panel Dust Accumulation and Cleanings

    Science.gov (United States)

    2005-01-01

    Air-fall dust accumulates on the solar panels of NASA's Mars Exploration Rovers, reducing the amount of sunlight reaching the solar arrays. Pre-launch models predicted steady dust accumulation. However, the rovers have been blessed with occasional wind events that clear significant amounts of dust from the solar panels. This graph shows the effects of those panel-cleaning events on the amount of electricity generated by Spirit's solar panels. The horizontal scale is the number of Martian days (sols) after Spirit's Jan. 4, 2005, (Universal Time) landing on Mars. The vertical scale indicates output from the rover's solar panels as a fraction of the amount produced when the clean panels first opened. Note that the gradual declines are interrupted by occasional sharp increases, such as a dust-cleaning event on sol 420.

  12. In-Water Hull Cleaning & Filtration System

    Science.gov (United States)

    George, Dan

    2015-04-01

    Dan George R & D Mining Technology LinkedIn GRD Franmarine have received the following prestigious awards in 2014 for their research & development of an in-water hull cleaning and filtration system "The Envirocart: Golden Gecko Award for Environmental Excellence; WA Innovator of the Year - Growth Sector; Department of Fisheries - Excellence in Marine Biosecurity Award - Innovation Category; Lloyd's List Asia Awards - Environmental Award; The Australian Innovation Challenge - Environment, Agriculture and Food Category; and Australian Shipping and Maritime Industry Award - Environmental Transport Award. The Envirocart developed and patented by GRD Franmarine is a revolutionary new fully enclosed capture and containment in-water hull cleaning technology. The Envirocart enables soft Silicon based antifouling paints and coatings containing pesticides such as Copper Oxide to be cleaned in situ using a contactless cleaning method. This fully containerised system is now capable of being deployed to remote locations or directly onto a Dive Support Vessel and is rated to offshore specifications. This is the only known method of in-water hull cleaning that complies with the Department of Agriculture Fisheries and Forestry (DAFF) and Department of Fisheries WA (DoF) Guidelines. The primary underwater cleaning tool is a hydraulically powered hull cleaning unit fitted with rotating discs. The discs can be fitted with conventional brushes for glass or epoxy based coatings or a revolutionary new patented blade system which can remove marine biofouling without damaging the antifouling paint (silicone and copper oxide). Additionally there are a patented range of fully enclosed hand cleaning tools for difficult to access niche areas such as anodes and sea chests, providing an innovative total solution that enables in-water cleaning to be conducted in a manner that causes no biological risk to the environment. In full containment mode or when AIS are present, material is pumped

  13. Agents of Change

    DEFF Research Database (Denmark)

    Hansen, Jens Aage; Lehmann, Martin

    2004-01-01

    at large, it emphasises universities as key change agents and providers in new learning, including tools such as project based and problem oriented learning (PBL) as well as information and communication technology (ICT); as providers of competent and motivated graduates to fill key positions in society...

  14. Programming Agents with Emotions

    NARCIS (Netherlands)

    Dastani, Mehdi; Floor, Chr.; Meyer, John-Jules Charles

    2014-01-01

    In this paper we show how a cognitive agent programming language can be endowed with ways to program emotions. In particular we show how the programming language 2APL can be augmented so that it can work together with the computational emotion model ALMA to deal with appraisal, emotion/mood generati

  15. The need for agents

    DEFF Research Database (Denmark)

    Abolfazlian, Ali Reza Kian

    1996-01-01

    I denne artikel arbejder vi med begrebet Intelligent Software Agents (ISAs), som autonomous, social, reactive, proactive og subservient computer systemer. Baseret på socialt psykologiske argumenter viser jeg endvidere, hvordan både den menneskelige natur og det teknologiske stadium, som mennesket...

  16. SECOND BUYING AGENT

    CERN Multimedia

    SPL - SERVICES ACHATS

    2000-01-01

    Last year the buying agent LOGITRADE started operations on the CERN site, processing purchasing requests for well-defined families of products up to a certain value. It was planned from the outset that a second buying agent would be brought in to handle the remaining product families. So, according to that plan, the company CHARLES KENDALL will be commencing operations at CERN on 8 May 2000 in Building 73, 1st floor, offices 31 and 35 (phone and fax numbers to be announced).Each buying agent will have its own specific list of product families and will handle purchasing requests up to 10'000 CHF.Whenever possible they will provide the requested supplies at a price (including the cost of their own services) which must be equivalent to or lower than the price mentioned on the purchasing request, changing the supplier if necessary. If a lower price cannot be obtained, agents will provide the necessary administrative support free of charge.To ensure that all orders are processed in the best possible conditions, us...

  17. Clean Processing and Utilization of Coal Energy

    Institute of Scientific and Technical Information of China (English)

    陈如清; 王海峰

    2006-01-01

    The dominant status of coal on the energy production and consumption structure of China will not be changed in the middle period of this century. To realize highly efficient utilization of coal, low pollution and low cost are great and impendent tasks. These difficult problems can be almost resolved through establishing large-scale pithead power stations using two-stage highly efficient dry coal-cleaning system before coal burning, which is a highly efficient, clean and economical strategy considering the current energy and environmental status of China. All these will be discussed in detail in this paper.

  18. Cleaning with solvents methods and machinery

    CERN Document Server

    Durkee, John

    2014-01-01

    High-precision cleaning is required across many sectors, including aerospace, defense, medical device manufacturing, pharmaceutical processing, semiconductor/electronics, and more. In this comprehensive reference work, solvent cleaning equipment is thoroughly covered with a focus on the engineering details of its operation and selection. Key data is provided alongside practical guidance, giving scientists and engineers in multiple sectors the information they need not only to choose the correct machine in the first place, but also how to operate it effectively and efficiently. Low emission

  19. Chemical cleaning of UK AGR boilers

    International Nuclear Information System (INIS)

    For a number of years, the waterside pressure drops across the advanced gas-cooled reactor (AGR) pod boilers have been increasing. The pressure drop increases have accelerated with time, which is the converse behaviour to that expected for rippled magnetite formation (rapid initial increase slowing down with time). Nonetheless, magnetite deposition remains the most likely cause for the increasing boiler resistances. A number of potential countermeasures have been considered in response to the boiler pressure drop increases. However, there was no detectable reduction in the rate of pressure drop increase. Chemical cleaning was therefore considered and a project to substantiate and then implement chemical cleaning was initiated. (authors)

  20. Build Autonomic Agents with ABLE

    Institute of Scientific and Technical Information of China (English)

    吴吉义

    2007-01-01

    The IBM Agent Building and Learning Environment(ABLE) provides a lightweight Java~(TM) agent frame- work,a comprehensive JavaBeansTM library of intelligent software components,a set of development and test tools, and an agent platform.After the introduction to ABLE,classes and interfaces in the ABLE agent framework were put forward.At last an autonomic agent that is an ABLE-based architecture for incrementally building autonomic systems was discussed.

  1. 减压蒸馏塔的化学清洗%Chemical cleaning of a vacuum distillation tower

    Institute of Scientific and Technical Information of China (English)

    李庆梅; 王帝; 陈清玉; 王星明

    2012-01-01

    研究了炼油厂加工含硫原油蒸馏装置减压塔硫化亚铁的形成,装置停工检修时硫化亚铁自燃机理及其对装置的危害。介绍了减压蒸馏塔垢样的组成;清洗此种垢样,采用的碱洗方法,清洗机理,化学清洗剂的组成;采用塔器级联循环清洗方案,有效地吸收硫化氢,确保清洗过程安全环保,清洗效果良好,无二次浮锈生成。%To research on oil refinery processing high sulfur crude oil distillation tower of ferrous sulfide formation, unit overhaul ferrous sulfide spontaneous combustion mechanism and harm of device. To introduces the vacuum distillation tower scale sample composition, cleaning the scale sample, using safety alkali washing method, cleaning mechanism, chemical cleaning agent composition. The tower to use cascade cycle cleaning solutions, effective absorption of hydrogen sulfide, ensure the cleaning process safety and environmental protection. The cleaning effect is good, no two floating rust.

  2. Cleaning methods and philosophy of cleaning to prevent or mitigate microbiological influenced corrosion

    International Nuclear Information System (INIS)

    It is well established that clean material surfaces remain free of most forms of debilitating corrosion, including microbiological influenced corrosion (MIC). Therefore, the prevention of MIC depends on effective treatments and service conditions which precludes various fouling mechanisms, especially biofouling. Mitigation of MIC must begin by removal of fouling deposits which contribute to colonization of material surfaces by bacteria which influence corrosion. There are many cleaning methods and alternatives to consider which can be generally classified as chemical or mechanical processes. Selection of the cleaning process(es) involves technical, economic, and practical factors. Deposit characterization and cleaning trials are essential tot he success of any cleaning project. Procedures should identify all major steps of the cleaning, however, the project manager must have the latitude and technical support to facilitate changes to protect plant equipment and optimize the cleaning effectiveness. This review is most applicable to raw cooling water systems, where much of the emphasis on mitigation of MIC is needed. Closed loop cooling water systems are discussed briefly, as are fire protection systems and high purity water systems

  3. ENHANCED CHEMICAL CLEANING: A NEW PROCESS FOR CHEMICALLY CLEANING SAVANNAH RIVER WASTE TANKS

    Energy Technology Data Exchange (ETDEWEB)

    Ketusky, E; Neil Davis, N; Renee Spires, R

    2008-01-17

    The Savannah River Site (SRS) has 49 high level waste (HLW) tanks that must be emptied, cleaned, and closed as required by the Federal Facilities Agreement. The current method of chemical cleaning uses several hundred thousand gallons per tank of 8 weight percent (wt%) oxalic acid to partially dissolve and suspend residual waste and corrosion products such that the waste can be pumped out of the tank. This adds a significant quantity of sodium oxalate to the tanks and, if multiple tanks are cleaned, renders the waste incompatible with the downstream processing. Tank space is also insufficient to store this stream given the large number of tanks to be cleaned. Therefore, a search for a new cleaning process was initiated utilizing the TRIZ literature search approach, and Chemical Oxidation Reduction Decontamination--Ultraviolet (CORD-UV), a mature technology currently used for decontamination and cleaning of commercial nuclear reactor primary cooling water loops, was identified. CORD-UV utilizes oxalic acid for sludge dissolution, but then decomposes the oxalic acid to carbon dioxide and water by UV treatment outside the system being treated. This allows reprecipitation and subsequent deposition of the sludge into a selected container without adding significant volume to that container, and without adding any new chemicals that would impact downstream treatment processes. Bench top and demonstration loop measurements on SRS tank sludge stimulant demonstrated the feasibility of applying CORD-UV for enhanced chemical cleaning of SRS HLW tanks.

  4. EUV mask cleans comparison of frontside and dual-sided concurrent cleaning

    Science.gov (United States)

    Cheong, Lin Lee; Kindt, Louis; Turley, Christina; Leonhard, Dusty; Boyle, John; Robinson, Chris; Rankin, Jed; Corliss, Daniel

    2015-03-01

    The cleaning requirements for EUV masks are more complex than optical masks due to the absence of available EUVcompatible pellicles. EUV masks must therefore be capable of undergoing more than 100 cleaning cycles with minimum impact to lithographic performance. EUV masks are created on substrates with 40 multilayers of silicon and molybdenum to form a Bragg reflector, capped with a 2.5nm-thick ruthenium layer and a tantalum-based absorber; during usage, both ruthenium and absorber are exposed to the cleaning process. The CrN layer on the backside is used to enable electrostatic clamping. This clamp side must also be free of particles that could impact printing and overlay, and particles could also potentially migrate to the frontside and create defects. Thus, the cleaning process must provide decent particle removal efficiencies on both front- and backside while maintaining reflectivity with minimal surface roughness change. In this paper, we report progress developing a concurrent patterned-side and clamped-side cleaning process that achieves minimal reflectivity change over 120 cleaning cycles, with XPS and EDS indicating the presence of ruthenium after 125 cleaning cycles. The change in surface roughness over 100 cleaning cycles is within the noise (0.0086nm) on a mask blank, and SEM inspection of 100nm and 200nm features on patterned masks after undergoing 100 cleaning cycles show no indications of ruthenium pitting or significant surface damage. This process was used on test masks to remove particles from both sides that would otherwise inhibit these masks from being used in the scanner.

  5. Evaluation of clean-up agents for total petroleum hydrocarbon analysis in biota and sediments.

    NARCIS (Netherlands)

    Muijs, B.; Jonker, M.T.O.

    2009-01-01

    Petroleum hydrocarbons (oil) are common environmental contaminants. For risk assessment purposes, their concentrations in environmental matrixes, such as biota and soils/sediments are frequently determined by solvent extraction and subsequent analysis with gas chromatography (GC) equipped with flame

  6. REVIEW OF ALTERNATIVE ENHANCED CHEMICAL CLEANING OPTIONS FOR SRS WASTE TANKS

    Energy Technology Data Exchange (ETDEWEB)

    Hay, M.; Koopman, D.

    2009-08-01

    A literature review was conducted to support the Task Technical and Quality Assurance Plan for Alternative Enhanced Chemical Cleaning (AECC) for sludge heel removal funded as part of the EM-21 Engineering and Technology program. The goal was to identify potential technologies or enhancements to the baseline oxalic acid cleaning process for chemically dissolving or mobilizing Savannah River Site (SRS) sludge heels. The issues with the potentially large volume of oxalate solids generated from the baseline process have driven an effort to find an improved or enhanced chemical cleaning technology for the tank heels. This literature review builds on a previous review conducted in 2003. A team was charged with evaluating the information in these reviews and developing recommendations of alternative technologies to pursue. The new information in this report supports the conclusion of the previous review that oxalic acid remains the chemical cleaning agent of choice for dissolving the metal oxides and hydroxides found in sludge heels in carbon steel tanks. The potential negative impact of large volumes of sodium oxalate on downstream processes indicates that the amount of oxalic acid used for chemical cleaning needs to be minimized as much as possible or the oxalic acid must be destroyed prior to pH adjustment in the receipt tank. The most straightforward way of minimizing the volume of oxalic acid needed for chemical cleaning is through more effective mechanical cleaning. Using a mineral acid to adjust the pH of the sludge prior to adding oxalic acid may also help to minimize the volume of oxalic acid used in chemical cleaning. If minimization of oxalic acid proves insufficient in reducing the volume of oxalate salts, several methods were found that could be used for oxalic acid destruction. For some waste tank heels, another acid or even caustic treatment (or pretreatment) might be more appropriate than the baseline oxalic acid cleaning process. Caustic treatment of high

  7. The clean, the dirty and the ugly: A critical analysis of 'clean joke' Web Sites

    OpenAIRE

    Shifman, Limor; Varsano, Hamutal Ma’apil

    2007-01-01

    The paper focuses on the phenomenon of ‘clean joke’ Web sites. Such sites are often described as providing family-friendly humor, which is safe for children. However, our analysis reveals that the term ‘clean joke’ has mainly one operative meaning: a joke which is ‘sex-free’. Whereas sex is excluded from ‘clean joke’ sites, sexist, racist and ageist content does appear in them. Therefore, the problematic message some of these Web sites convey is that: a) sex is ‘dirty’; and b) sexism and othe...

  8. Technology: New Ways for Clean Water

    Science.gov (United States)

    Roberts, Amanda S.

    2012-01-01

    Water purification promotes healthy living. While the developing world is working to provide its citizens with future access to clean water sources, the demand for that water is a pressing need today. It should be understood that drinking water, sanitation, and hygiene are interwoven and are all necessary for the overall improved standard of…

  9. Second annual clean coal technology conference: Proceedings

    International Nuclear Information System (INIS)

    This report contains paper on the following topics: coal combustion/coal processing; advanced electric power generation systems; combined nitrogen oxide/sulfur dioxide control technologies; and emerging clean coal issues and environmental concerns. These paper have been cataloged separately elsewhere

  10. Clean Hands Help Prevent the Flu

    Centers for Disease Control (CDC) Podcasts

    2009-05-06

    Clean hands can help prevent the spread of infectious diseases, such as flu. This podcast explains the proper way to wash your hands.  Created: 5/6/2009 by Coordinating Center for Infectious Diseases, National Center for Immunization and Respiratory Diseases, Influenza Division (CCID/NCIRD/ID).   Date Released: 5/6/2009.

  11. Ductless personalized ventilation with local air cleaning

    DEFF Research Database (Denmark)

    Dalewski, Mariusz; Vesely, Michal; Melikov, Arsen Krikor

    2012-01-01

    An experiment with 28 human subjects was performed to examine effects of using a local air cleaning device combined with ductless personalized ventilation (DPV) on perceived air quality. Experiments were performed in a test room with displacement ventilation. The DPV at one of two desks...

  12. Clean coal technology: Export finance programs

    Energy Technology Data Exchange (ETDEWEB)

    1993-09-30

    Participation by US firms in the development of Clean Coal. Technology (CCT) projects in foreign countries will help the United States achieve multiple national objectives simultaneously--addressing critical goals related to energy, environmental technology, industrial competitiveness and international trade. US participation in these projects will result in an improved global environment, an improvement in the balance of payments and an increase in US jobs. Meanwhile, host countries will benefit from the development of economically- and environmentally-sound power facilities. The Clean Air Act Amendments of 1990 (Public Law 101-549, Section 409) as supplemented by a requirement in the Energy Policy Act of 1992 (Public Law 102-486, Section 1331(f)) requires that the Secretary of Energy, acting through the Trade Promotion Coordinating Committee Subgroup on Clean Coal Technologies, submit a report to Congress with information on the status of recommendations made in the US Department of Energy, Clean Coal Technology Export Programs, Report to the United States Congress, February 1992. Specific emphasis is placed on the adequacy of financial assistance for export of CCTS. This report fulfills the requirements of the Act. In addition, although this report focuses on CCT power projects, the issues it raises about the financing of these projects are also relevant to other CCT projects such as industrial applications or coal preparation, as well as to a much broader range of energy and environmental technology projects worldwide.

  13. Cleaning Our World through Reverse Graffiti

    Science.gov (United States)

    Randazzo, Gabe; LaJevic, Lisa

    2013-01-01

    Over the last decade artists have begun to experiment with "reverse pollution" techniques, such as reverse graffiti, which focuses on cleaning environmental surfaces. Having recently been introduced to the works of Moose, the artist known for inventing the reverse graffiti technique, the authors decided to design a curriculum to increase…

  14. Self-cleaning geopolymer concrete - A review

    Science.gov (United States)

    Norsaffirah Zailan, Siti; Mahmed, Norsuria; Bakri Abdullah, Mohd Mustafa Al; Sandu, Andrei Victor

    2016-06-01

    Concrete is the most widely used construction materials for building technology. However, cement production releases high amounts of carbon dioxide (CO2) to the atmosphere that leads to increasing the global warming. Thus, an alternative, environmental friendly construction material such as geopolymer concrete has been developed. Geopolymer concrete applies greener alternative binder, which is an innovative construction material that replaces the Portland cement. This technology introduced nano-particles such as nanoclay into the cement paste in order to improve their mechanical properties. The concrete materials also have been developed to be functioned as self-cleaning construction materials. The self-cleaning properties of the concrete are induced by introducing the photocatalytic materials such as titania (TiO2) and zinc oxide (ZnO). Self-cleaning concrete that contains those photocatalysts will be energized by ultraviolet (UV) radiation and accelerates the decomposition of organic particulates. Thus, the cleanliness of the building surfaces can be maintained and the air surrounding air pollution can be reduced. This paper briefly reviews about self-cleaning concrete.

  15. Clean slate corrective action investigation plan

    International Nuclear Information System (INIS)

    The Clean Slate sites discussed in this report are situated in the central portion of the Tonopah Test Range (TTR), north of the Nevada Test Site (NTS) on the northwest portion of the Nellis Air Force Range (NAFR) which is approximately 390 kilometers (km) (240 miles [mi]) northwest of Las Vegas, Nevada. These sites were the locations for three of the four Operation Roller Coaster experiments. These experiments evaluated the dispersal of plutonium in the environment from the chemical explosion of a plutonium-bearing device. Although it was not a nuclear explosion, Operation Roller Coaster created some surface contamination which is now the subject of a corrective action strategy being implemented by the Nevada Environmental Restoration Project (NV ERP) for the U.S. Department of Energy (DOE). Corrective Action Investigation (CAI) activities will be conducted at three of the Operation Roller Coaster sites. These are Clean Slate 1 (CS-1), Clean Slate 2 (CS-2), and Clean Slate 3 (CS-3) sites, which are located on the TTR. The document that provides or references all of the specific information relative to the various investigative processes is called the Corrective Action Investigation Plan (CAIP). This CAIP has been prepared for the DOE Nevada Operations Office (DOE/NV) by IT Corporation (IT)

  16. Discharge cleaning on TFTR after boronization

    International Nuclear Information System (INIS)

    At the beginning of the 1990 TFTR experimental run, after replacement of POCO-AXF-5Q graphite tiles on the midplane of the bumper limiter by carbon fiber composite (CFC) tiles and prior to any Pulse Discharge Cleaning (PDC), boronization was performed. Boronization is the deposition of a layer of boron and carbon on the vacuum vessel inner surface by a glow discharge in a diborane, methane and helium mixture. The amount of discharge cleaning required after boronization was substantially reduced compared to that which was needed after previous openings when boronization was not done. Previously, after a major shutdown, about 105 low current (∼20 kA) Taylor Discharge Cleaning (TDC) pulses were required before high current (∼400 kA) aggressive Pulse Discharge Cleaning (PDC) pulses could be performed successfully. Aggressive PDC is used to heat the limiters from the vessel bakeout temperature of 150 degrees C to 250 degrees C for a period of several hours. Heating the limiters is important to increase the rate at which water is removed from the carbon limiter tiles. After boronization, the number of required TDC pulses was reduced to <5000. The number of aggressive PDC pulses required was approximately unchanged. 14 refs., 1 tab

  17. Applying Physics to Clean Energy Needs

    Science.gov (United States)

    Environmental Science and Technology, 1975

    1975-01-01

    Solar and ocean thermal energy sources offer real potential for an environmentally clean fuel by the year 2000. A review of current research contracts relating to ocean-thermal energy, cost requirements of plant construction and uses of the electricity produced, such as synthesizing ammonia and synthetic fuels, are discussed. (BT)

  18. Uus silt turul - clean label / Gunnel Koba

    Index Scriptorium Estoniae

    Koba, Gunnel

    2013-01-01

    Suurbritanniast alguse saanud clean labeli toiduainete märgis annab tarbijale kindlustunde, et tegemist on võimalikult puhta lihtsa ja arusaadava koostisega tootega. Samas pole märgisel ametlikku definitsiooni ning pole välistatud, et toiduaine koostises ei ole ka mõni e-aine

  19. Clean slate corrective action investigation plan

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-05-01

    The Clean Slate sites discussed in this report are situated in the central portion of the Tonopah Test Range (TTR), north of the Nevada Test Site (NTS) on the northwest portion of the Nellis Air Force Range (NAFR) which is approximately 390 kilometers (km) (240 miles [mi]) northwest of Las Vegas, Nevada. These sites were the locations for three of the four Operation Roller Coaster experiments. These experiments evaluated the dispersal of plutonium in the environment from the chemical explosion of a plutonium-bearing device. Although it was not a nuclear explosion, Operation Roller Coaster created some surface contamination which is now the subject of a corrective action strategy being implemented by the Nevada Environmental Restoration Project (NV ERP) for the U.S. Department of Energy (DOE). Corrective Action Investigation (CAI) activities will be conducted at three of the Operation Roller Coaster sites. These are Clean Slate 1 (CS-1), Clean Slate 2 (CS-2), and Clean Slate 3 (CS-3) sites, which are located on the TTR. The document that provides or references all of the specific information relative to the various investigative processes is called the Corrective Action Investigation Plan (CAIP). This CAIP has been prepared for the DOE Nevada Operations Office (DOE/NV) by IT Corporation (IT).

  20. Clean Cities Now Vol. 19, No. 1

    Energy Technology Data Exchange (ETDEWEB)

    None

    2015-07-24

    Now is the official bi-annual newsletter of Clean Cities, an initiative designed to reduce petroleum consumption in the transportation sector by advancing the use of alternative and renewable fuels, fuel economy improvements, idle-reduction measures, and new technologies, as they emerge.

  1. Perioperative allergy: uncommon agents.

    Science.gov (United States)

    Caimmi, S; Caimmi, D; Cardinale, F; Indinnimeo, L; Crisafulli, G; Peroni, D G; Marseglia, G L

    2011-01-01

    Anesthesia may often be considered as a high-risk procedure and anaphylaxis remains a major cause of concern for anesthetists who routinely administer many potentially allergenic agents. Neuromuscular blocking agents, latex and antibiotics are the substances involved in most of the reported reactions. Besides these three agents, a wide variety of substances may cause an anaphylactic reaction during anesthesia. Basically all the administered drugs or substances may be potential causes of anaphylaxis. Among them, those reported the most in literature include hypnotics, opioids, local anesthetics, colloids, dye, Non-Steroidal Anti-Inflammatory Drugs (NSAIDs), Iodinated Contrast Media (ICM), antiseptics, aprotinin, ethylene oxyde and formaldehyde, and protamine and heparins. No premedication can effectively prevent an allergic reaction and a systematic preoperative screening is not justified for all patients; nevertheless, an allergy specialist should evaluate those patients with a history of anesthesia-related allergy. Patients must be fully informed of investigation results, and advised to provide a detailed report prior to future anesthesia. PMID:22014927

  2. Clean Slate 2 Revegetation and Monitoring Plan

    International Nuclear Information System (INIS)

    This document is a reclamation plan for short-term and long-term stabilization of land disturbed by activities associated with interim clean-up of radionuclide-contaminated surface soil at Clean Slate 2 located northwest of the Nevada Test Site on the Nellis Air Force Range. Surface soils at Clean Slate 2 were contaminated as a result of the detonation of a device containing plutonium and depleted uranium using chemical explosives. Excavation of contaminated soils at Clean Slate 2 will follow procedures similar to those used during the cleanup of the Double Tracks and Clean Slate 1 sites. A maximum of approximately 33 cm (12 in) of the surface soils will be excavated and removed from the site. Near ground zero, where contamination levels are highest, approximately 2 m (7 ft) of soil may be removed. The maximum area to be excavated is estimated to be 18.4 hectares (45.4) acres. In addition to the disturbance associated with soil excavation, approximately 2.0 hectares (5.0) acres will be disturbed by the construction of staging areas and placement of support facilities. Short term stabilization consists of an application of a chemical soil stabilizer and long-term stabilizations involves the establishment of a permanent vegetative cover using selective native plant species, site preparation techniques, increasing organic matter and water holding capacity, irrigation to ensure seed germination and plant establishment. The cleanup site will be monitored to ensure success of revegetation and resuspension of soil particles is within established limits

  3. National Alliance for Clean Energy Incubators New Mexico Clean Energy Incubator

    Energy Technology Data Exchange (ETDEWEB)

    Roberts, Suzanne S.

    2004-12-15

    The National Alliance for Clean Energy Incubators was established by the National Renewable Energy Laboratory (NREL) to develop an emerging network of business incubators for entrepreneurs specializing in clean energy enterprises. The Alliance provides a broad range of business services to entrepreneurs in specific geographic locales across the U.S. and in diverse clean energy technology areas such as fuel cells, alternative fuels, power generation, and renewables, to name a few. Technology Ventures Corporation (TVC) participates in the Alliance from its corporate offices in Albuquerque, NM, and from its sites in Northern and Southern New Mexico, California, and Nevada. TVC reports on the results of its attempts to accelerate the growth and success of clean energy and energy efficiency companies through its array of business support services. During the period from September 2002 through September 2004, TVC describes contributions to the Alliance including the development of 28 clients and facilitating capital raises exceeding $35M.

  4. Microbial water quality in clean water tanks following inspection and cleaning

    DEFF Research Database (Denmark)

    Christensen, Sarah Christine Boesgaard; Esbjørn, Anne; Albrechtsen, Hans-Jørgen

    , during and after cleaning of the tanks were analysed. Bacteria were quantified, the dominating bacterial groups were identified and re-growth potential in the water was estimated. Bacterial counts did not exceed drinking water guideline values but ATP concentrations in the water were high right after......Increased bacterial counts are often registered in drinking water leaving clean water tanks after the tanks have been emptied, inspected and cleaned by flushing. To investigate the reason for the increased bacterial concentrations and consequently limit it, samples from two clean water tanks before...... start-up of the tanks, which may indicate that a substantial part of the bacteria in the drinking water leaving the tanks originated from the sand filter. This was supported by 16S DNA analyses....

  5. Financing clean energy market creation. Clean energy ventures, venture capitalists and other investors

    Energy Technology Data Exchange (ETDEWEB)

    Teppo, T. [Helsinki Univ. of Technology, Espoo (Finland). Development and Management in Industry

    2006-07-01

    Many factors have emerged for change towards cleaner and more efficient technologies and services: climate change, increasing oil demands, and rising living standards in many parts of the world are putting an ever-increasing strain on the environment. Recently, these drivers have fueled the formation of a clean energy venture capital market where both independent venture capitalists (VCs) and corporate venture capitalists (CVCs) have invested in clean energy start-ups. Financing of clean energy market creation is the focus of this dissertation. The dissertation contributes to several bodies of literature in the area of entrepreneurship, new industry creation, corporate venturing, and venture capital research. The dissertation uses a grounded theory approach. The study is guided by three data collection approaches with an emphasis on the first two. First, interviews with European and North American VC and CVC firms that have invested in the clean energy sector were carried out. Second, a clean energy venture financing survey that consisted of qualitative, essay-format questions and some quantitative questions was carried out. Third, interviews with clean energy stakeholders were carried out in order to gain a better understanding of the emerging sector. The research results consist of three main findings. First, the research results suggest that clean energy ventures face the following three main entrepreneurial challenges: financing, market education, and growth management. A further study of three clean energy industry categories revealed additional challenges that varied according to the industry development stage. Second, the results demonstrate that, from a venture capitalist perspective, clean energy venture risk characteristics can be divided into two groups: generally recognized risk characteristics and cognitive risk characteristics. The identified generally recognized risk characteristics were market demand and adaptation, incompatibility with the VC model

  6. SAM : Semantic Agent Model for SWRL rule-based agents

    OpenAIRE

    Subercaze, Julien; Maret, Pierre

    2010-01-01

    International audience SemanticWeb technologies are part of multi-agent engineering, especially regarding knowledge base support. Recent advances in the field of logic for the semantic web enable a new range of applications. Among them, programming agents based on semantic rules is a promising field. In this paper we present a semantic agent model that allows SWRL programming of agents. Our approach, based on the extended finite state machine concept, results in a three layers architecture...

  7. Effectuality of Cleaning Workers' Training and Cleaning Enterprises' Chemical Health Hazard Risk Profiling

    OpenAIRE

    Abdulqadir M. Suleiman; Svendsen, Kristin V.H.

    2015-01-01

    Background Goal-oriented communication of risk of hazards is necessary in order to reduce risk of workers' exposure to chemicals. Adequate training of workers and enterprise priority setting are essential elements. Cleaning enterprises have many challenges and the existing paradigms influence the risk levels of these enterprises. Methods Information on organization and enterprises' prioritization in training programs was gathered from cleaning enterprises. A measure of enterprises' conceptual...

  8. Evaluation of on-line chelant addition to PWR steam generators. Steam generator cleaning project

    International Nuclear Information System (INIS)

    The investigation of chelating agents for continuous water treatment of secondary loops of PWR steam generators were conducted in two general areas: the study of the chemistry of chelating agents and the study of materials compatability with chelating agents. The thermostability of both EDTA and HEDTA metal chelates in All Volatile Treatment (AVT) water chemistry were shown to be greater than or equal to the thermostability of EDTA metal chelates in phosphate-sulfite water chemistry. HEDTA metal chelates were shown to have a much greater stability than EDTA metal chelates. Using samples taken from the EDTA metal chelate thermostability study and from the Commonwealth Research Corporation (CRC) model steam generators (MSG), EDTA decomposition products were determined. Active metal surfaces were shown to become passivated when exposed to EDTA and HEDTA concentrations as high as 0.1% w/w in AVT. Trace amounts of iron in the water were found to increase the rate of passivation. Material balance and visual inspection data from CRC model steam generators showed that metal was transported through and cleaned from the MSG's. The Inconel 600 tubes of the salt water fouled model steam generators experienced pitting corrosion. Results of this study demonstrates the feasibility of EDTA as an on-line water treatment additive to maintain nuclear steam generators in a clean condition

  9. Observed practices and perceived advantages of different hand cleansing agents in rural Bangladesh: ash, soil, and soap.

    Science.gov (United States)

    Nizame, Fosiul A; Nasreen, Sharifa; Halder, Amal K; Arman, Shaila; Winch, Peter J; Unicomb, Leanne; Luby, Stephen P

    2015-06-01

    Bangladeshi communities have historically used ash and soil as handwashing agents. A structured observation study and qualitative interviews on the use of ash/soil and soap as handwashing agents were conducted in rural Bangladesh to help develop a handwashing promotion intervention. The observations were conducted among 1,000 randomly selected households from 36 districts. Fieldworkers observed people using ash/soil to wash their hand(s) on 13% of occasions after defecation and on 10% after cleaning a child's anus. This compares with 19% of people who used soap after defecation and 27% after cleaning a child who defecated. Using ash/soil or soap was rarely (soap.

  10. Clean Cities Now: Vol. 16, No. 1, May 2012 (Brochure)

    Energy Technology Data Exchange (ETDEWEB)

    2012-05-01

    Biannual newsletter for the U.S. Department of Energy's Clean Cities initiative. The newsletter includes feature stories on advanced vehicle deployment, idle reduction, and articles on Clean Cities coalition successes across the country.

  11. Apparatuses, Systems and Methods for Cleaning Photovoltaic Devices

    KAUST Repository

    Eitelhuber, Georg

    2013-02-14

    Embodiments of solar panel cleaning apparatuses, solar panel cleaning systems, and solar panel cleaning methods are disclosed. In certain embodiments, the disclosed solar panel cleaning apparatuses, systems and methods do may not require any water or other cleaning liquids in the whole cleaning process, which makes them prominent well suited in for water-deficit environments such as deserts. In one embodiment, the solar panel cleaning apparatus comprises one or more rotatable brushes each having a rotational axis and a drive configured to move each of the one or more rotatable brushes in a direction that is not perpendicular to the rotational axis. The solar panel cleaning apparatus is may be configured such that the angle of the rotational axis of at least one of the one or more rotatable brushes is adjustable relative to the direction of travel.

  12. 7 CFR 58.725 - Trimming and cleaning.

    Science.gov (United States)

    2010-01-01

    ... Procedures § 58.725 Trimming and cleaning. The natural cheese shall be cleaned free of all non-edible portions. Paraffin and bandages as well as rind surface, mold or unclean areas or any other part which...

  13. Clean Cities Now: Vol. 16, No. 2, Fall 2012 (Brochure)

    Energy Technology Data Exchange (ETDEWEB)

    2012-09-01

    Biannual newsletter for the U.S. Department of Energy's Clean Cities initiative. The newsletter includes feature stories on advanced vehicle deployment, idle reduction, and articles on Clean Cities coalition successes across the country.

  14. Automated spray cleaning using flammable solvents in a glovebox

    Energy Technology Data Exchange (ETDEWEB)

    Garcia, P.; Meirans, L.

    1998-05-01

    The phase-out of the ozone-depleting solvents has forced industry to look to solvents such as alcohol, terpenes and other flammable solvents to perform the critical cleaning processes. These solvents are not as efficient as the ozone-depleting solvents in terms of soil loading, cleaning time and drying when used in standard cleaning processes such as manual sprays or ultrasonic baths. They also require special equipment designs to meet part cleaning specifications and operator safety requirements. This paper describes a cleaning system that incorporates the automated spraying of flammable solvents to effectively perform precision cleaning processes. Key to the project`s success was the development of software that controls the robotic system and automatically generates robotic cleaning paths from three dimensional CAD models of the items to be cleaned.

  15. Clean Cities Now, Vol. 15, No. 1, April 2011 (Brochure)

    Energy Technology Data Exchange (ETDEWEB)

    2011-04-01

    Biannual newsletter for the U.S. Department of Energy's Clean Cities initiative. The newsletter includes feature stories on electric vehicle deployment, renewable natural gas, and articles on Clean Cities coalition successes across the country.

  16. Clean Cities Now: Vol. 17, No. 1, Spring 2013 (Brochure)

    Energy Technology Data Exchange (ETDEWEB)

    Sutor, J.; Tucker, E.; Thomas, J.

    2013-05-01

    Biannual newsletter for the U.S. Department of Energy's Clean Cities initiative. The newsletter includes feature stories on advanced vehicle deployment, idle reduction, and articles on Clean Cities coalition successes across the country.

  17. The Power Trading Agent Competition

    OpenAIRE

    Ketter, W.; Collins, J.; REDDY, P; Flath, C.

    2011-01-01

    This is the specification for the Power Trading Agent Competition for 2011 (Power TAC 2011). Agents are simulations of electrical power brokers, who must compete with each other for both power production and consumption, and manage their portfolios.

  18. Agents Play Mix-game

    CERN Document Server

    Gou, C

    2005-01-01

    In mix-game which is an extension of minority game, there are two groups of agents; group1 plays the majority game, but the group2 plays the minority game. This paper studies the change of the average winnings of agents and volatilities vs. the change of mixture of agents in mix-game model. It finds that the correlations between the average winnings of agents and the mean of local volatilities are different with different combinations of agent memory length when the proportion of agents in group 1 increases. This study result suggests that memory length of agents in group1 be smaller than that of agent in group2 when mix-game model is used to simulate the financial markets.

  19. The Power Trading Agent Competition

    NARCIS (Netherlands)

    W. Ketter (Wolfgang); J. Collins (John); P. Reddy (Prashant); C. Flath (Christoph)

    2011-01-01

    textabstractThis is the specification for the Power Trading Agent Competition for 2011 (Power TAC 2011). Agents are simulations of electrical power brokers, who must compete with each other for both power production and consumption, and manage their portfolios.

  20. Peripheral Neuropathy and Agent Orange

    Science.gov (United States)

    ... Enter ZIP code here Peripheral Neuropathy and Agent Orange VA presumes Veterans' early-onset peripheral neuropathy is related to their exposure to Agent Orange or other herbicides during service when the disease ...

  1. Kinetic comparisons during variations of the power clean.

    Science.gov (United States)

    Comfort, Paul; Allen, Mark; Graham-Smith, Phillip

    2011-12-01

    Comfort, P, Allen, M, and Graham-Smith, P. Kinetic comparisons during variations of the power clean. J Strength Cond Res 25(12): 3269-3273, 2011-The aim of this investigation was to determine the differences in peak power, peak vertical ground reaction forces, and rate of force development (RFD) during variations of the power clean. Elite rugby league players (n = 16; age 22 ± 1.58 years; height 182.25 ± 2.81 cm; body mass 98.65 ± 7.52 kg) performed 1 set of 3 repetitions of the power clean, hang power clean, midthigh power clean, or midthigh clean pull, using 60% of 1 repetition maximum power clean, in a randomized order, while standing on a force platform. One-way analysis of variance with Bonferroni post hoc analysis revealed a significantly (p clean (3,565.7 ± 410.6 W) and the midthigh clean pull (3,686.8 ± 386.5 W) compared with both the power clean (2,591.2 ± 645.5 W) and the hang power clean (3,183.6 ± 309.1 W), along with a significantly (p clean (2,813.8 ± 200.5 N) and the midthigh clean pull (2,901.3 ± 226.1 N) compared with both the power clean (2,264.1 ± 199.6 N) and the hang power clean (2,479.3 ± 267.6 N). The midthigh power clean (15,049.8 ± 4,415.7 N·s) and the midthigh clean pull (15,623.6 ± 3,114.4 N·s) also demonstrated significantly (p clean (8,657.9 ± 2,746.6 N·s) and the hang power clean (10,314.4 ± 4,238.2 N·s). From the findings of this study, when training to maximize power, Fz, and RFD, the midthigh power clean and midthigh clean pull appear to be the most advantageous variations of the power clean to perform.

  2. 钢骨架喷砂后清洗除尘工艺研究%Research on Technology of Cleaning Dust of Steel Skeleton after Sandblasting

    Institute of Scientific and Technical Information of China (English)

    谢彦飞; 彭拓; 王林; 曹广如; 李斌

    2014-01-01

    The effects of different types of cleaning agents and cleaning conditions on the surface of steel skeleton after sandblasting and the adhesive properties of steel-NR was investigated.The clean-ing agent of PRIME240 was determined.The best cleaning condition of PRIME240:cleaning time 5min ,dring time 4 min.With this condition treated steel skeleton ,the steel-NR adhesive property was superior to steel skeleton with the high pressure air treated.%探讨了不同种类清洗剂及清洗条件对钢骨架喷砂后表面清洁状态及钢-NR粘合性能的影响,确定清洗剂种类为PRIME240,清洗条件为:清洗时间5min,干燥时间4min,采用该工艺条件处理的钢-NR粘合性能要优于高压空气工艺方法。

  3. 40 CFR 61.152 - Air-cleaning.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 8 2010-07-01 2010-07-01 false Air-cleaning. 61.152 Section 61.152...-cleaning. (a) The owner or operator who uses air cleaning, as specified in §§ 61.142(a), 61.144(b)(2), 61... spun. (2) Properly install, use, operate, and maintain all air-cleaning equipment authorized by...

  4. Energy Systems Comparison and Clean High Tech Evolution

    OpenAIRE

    Grob, Gustav

    2010-01-01

    Humanity can be confident to survive on planet Earth in good livelihood, because 1 - there is enough clean, sustainable energy available for centuries to come 2 - these clean, sustainable energy systems are competitive with finite polluting systems 3 - decentralized, clean sustainable energy conversion will be growing world-wide 4 - environmental impacts can be avoided with clean, sustainable energy systems 5 - mineral resources can be conserved for future generations and must not be burnt an...

  5. Clean Production of Steel and Refractories in China's Steel Industry

    Institute of Scientific and Technical Information of China (English)

    SU Tiansen

    2002-01-01

    The paper describes the importance of clean production of steel and the relationships amongst sustaining development of steel industry, environment protection and the role of refractories in the clean production of steel. The main achievements and main shortcomings in the clean production of China' s steel industry have been reviewed together with the introduction of the policy supporting system and the future development of clean production in China' s steel industry.

  6. An activated fluid stream - New techniques for cold water cleaning

    OpenAIRE

    Birkin, Peter; Offin, Douglas; Leighton, Timothy

    2015-01-01

    Electrochemical, acoustic and imaging techniques are used to characterise surface cleaning with particular emphasis on the understanding of the key phenomena relevant to surface cleaning. A range of novel techniques designed to enhance and monitor the effective cleaning of a solid/liquid interface is presented. Among the techniques presented, mass transfer of material to a sensor embedded in a surface is demonstrated to be useful in the further exploration of ultrasonic cleaning of high asp...

  7. Mediating Performance Through Virtual Agents

    OpenAIRE

    Giannachi, Gabriella; Gillies, Marco; Kaye, Nick; Swapp, David

    2009-01-01

    This paper presents the process of creation of virtual agents used in a virtual reality performance. The performance aimed to investigate how drama and performance could inform the creation of virtual agents and also how virtual reality could raise questions for drama and performance. The virtual agents were based on the performance of 2 actors. This paper describes the process of preparing the actors, capturing their performances and transferring them to the virtual agents. A second set of a...

  8. Cultural Differentiation of Negotiating Agents

    NARCIS (Netherlands)

    Hofstede, G.J.; Jonker, C.M.; Verwaart, D.

    2012-01-01

    Negotiations proceed differently across cultures. For realistic modeling of agents in multicultural negotiations, the agents must display culturally differentiated behavior. This paper presents an agent-based simulation model that tackles these challenges, based on Hofstede’s model of national cultu

  9. Cultural differentiation of negotiating agents

    NARCIS (Netherlands)

    Hofstede, G.J.; Jonker, C.M.; Verwaart, T.

    2010-01-01

    Negotiations proceed differently across cultures. For realistic modeling of agents in multicultural negotiations, the agents must display culturally differentiated behavior. This paper presents an agent-based simulation model that tackles these challenges, based on Hofstede’s model of national cultu

  10. Assigning agents to a line

    DEFF Research Database (Denmark)

    Hougaard, Jens Leth; Moreno-Ternero, Juan D.; Østerdal, Lars Peter Raahave

    2014-01-01

    We consider the problem of assigning agents to slots on a line, where only one agent can be served at a slot and each agent prefers to be served as close as possible to his target. Our focus is on aggregate gap minimizing methods, i.e., those that minimize the total gap between targets and assigned...

  11. Chemical warfare agents

    Directory of Open Access Journals (Sweden)

    Vijayaraghavan R

    2010-01-01

    Full Text Available Among the Weapons of Mass Destruction, chemical warfare (CW is probably one of the most brutal created by mankind in comparison with biological and nuclear warfare. Chemical weapons are inexpensive and are relatively easy to produce, even by small terrorist groups, to create mass casualties with small quantities. The characteristics of various CW agents, general information relevant to current physical as well as medical protection methods, detection equipment available and decontamination techniques are discussed in this review article. A brief note on Chemical Weapons Convention is also provided.

  12. Secure Mobile Trade Agent

    Directory of Open Access Journals (Sweden)

    Musbah M. Aqe

    2007-01-01

    Full Text Available E-commerce on the internet has the ability to produce millions of transactions and a great number of merchants whose supply merchandise over the internet. As a result, it is difficult for entities to roam over every site on the internet and choose the best merchandise to trade. So, in this paper we introduced a mobile trade agent that visit the sites to gather and evaluate the information from merchant servers and decide to trade goods on behalf of the user. We observed that the combination of public key cryptosystem with distributed object technology make this proposed scheme more secure and efficient than the already existed schemes.

  13. 9 CFR 91.41 - Cleaning and disinfecting of aircraft.

    Science.gov (United States)

    2010-01-01

    ... 9 Animals and Animal Products 1 2010-01-01 2010-01-01 false Cleaning and disinfecting of aircraft... INSPECTION AND HANDLING OF LIVESTOCK FOR EXPORTATION Cleaning and Disinfecting of Aircraft § 91.41 Cleaning and disinfecting of aircraft. Prior to loading of animals, the stowage area of aircraft to be used...

  14. 21 CFR 211.182 - Equipment cleaning and use log.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 4 2010-04-01 2010-04-01 false Equipment cleaning and use log. 211.182 Section... Reports § 211.182 Equipment cleaning and use log. A written record of major equipment cleaning... individual equipment logs that show the date, time, product, and lot number of each batch processed....

  15. 75 FR 29605 - Clean Alternative Fuel Vehicle and Engine Conversions

    Science.gov (United States)

    2010-05-26

    ... Protection Agency 40 CFR Parts 85 and 86 Clean Alternative Fuel Vehicle and Engine Conversions; Proposed Rule...; ] ENVIRONMENTAL PROTECTION AGENCY 40 CFR Parts 85 and 86 RIN 2060-AP64 Clean Alternative Fuel Vehicle and Engine... tampering for the conversion of vehicles and engines to operate on a clean alternative fuel. Under...

  16. Clean Energy Solutions Center Services (Chinese Translation) (Fact Sheet)

    Energy Technology Data Exchange (ETDEWEB)

    2014-04-01

    This is the Chinese language translation of the Clean Energy Solutions Center (Solutions Center) fact sheet. The Solutions Center helps governments, advisors and analysts create policies and programs that advance the deployment of clean energy technologies. The Solutions Center partners with international organizations to provide online training, expert assistance, and technical resources on clean energy policy.

  17. 76 FR 60478 - Record of Decision, Texas Clean Energy Project

    Science.gov (United States)

    2011-09-29

    ... of Decision, Texas Clean Energy Project AGENCY: Department of Energy. ACTION: Record of decision... support to the Texas Clean Energy Project (TCEP). DOE prepared an Environmental Impact Statement (EIS... Texas Clean Energy, LLC (Summit) would design, construct, and operate. The project will...

  18. BP Cooperates with Chinese Partners for Clean Energy Research

    Institute of Scientific and Technical Information of China (English)

    2003-01-01

    @@ China's Academy of Sciences (CAS) and Tsinghua University held a seminar on clean energy at the Tsinghua-BP Clean Energy Research and Educational Center on November 12 to review the results achieved in the past year to implement the 10-year CAS-BP cooperative research project titled "Clean Energy for Future."

  19. 77 FR 54909 - Clean Water Act: Availability of List Decisions

    Science.gov (United States)

    2012-09-06

    ... AGENCY Clean Water Act: Availability of List Decisions AGENCY: Environmental Protection Agency (EPA... certain water quality limited waters and the associated pollutant to be listed pursuant to the Clean Water... . SUPPLEMENTARY INFORMATION: Section 303(d) of the Clean Water Act (CWA) requires that each state identify...

  20. 75 FR 62923 - WRC-07 Table Clean-up Order

    Science.gov (United States)

    2010-10-13

    ... Communications Commission 47 CFR Parts 1, 2, 15, et al. WRC-07 Table Clean-up Order; Final Rule #0;#0;Federal... COMMUNICATIONS COMMISSION 47 CFR Parts 1, 2 15, 25, 73, and 90 WRC-07 Table Clean-up Order AGENCY: Federal... Table Clean-up Order, the Commission adopted the ITU's placement methodology for footnote references...

  1. 19 CFR 151.75 - Final determination of clean yield.

    Science.gov (United States)

    2010-04-01

    ... 19 Customs Duties 2 2010-04-01 2010-04-01 false Final determination of clean yield. 151.75 Section 151.75 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND SECURITY; DEPARTMENT... Final determination of clean yield. The port director shall base his final determination of clean...

  2. 78 FR 20912 - Clean Water Act: Availability of List Decisions

    Science.gov (United States)

    2013-04-08

    ... AGENCY Clean Water Act: Availability of List Decisions AGENCY: Environmental Protection Agency (EPA). ACTION: Notice and initial request for public input. SUMMARY: The Clean Water Act requires that States... Richardson at (215) 814-5675. SUPPLEMENTARY INFORMATION: Section 303(d) of the Clean Water Act requires...

  3. 77 FR 15368 - Clean Water Act; Availability of List Decisions

    Science.gov (United States)

    2012-03-15

    ... AGENCY Clean Water Act; Availability of List Decisions AGENCY: Environmental Protection Agency (EPA... segments and associated pollutants in Oregon to be listed pursuant to section 303(d)(2) of the Clean Water... INFORMATION: Section 303(d) of the Clean Water Act (CWA) (hereinafter referred to as ``Section...

  4. 40 CFR 263.31 - Discharge clean up.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 25 2010-07-01 2010-07-01 false Discharge clean up. 263.31 Section 263...) STANDARDS APPLICABLE TO TRANSPORTERS OF HAZARDOUS WASTE Hazardous Waste Discharges § 263.31 Discharge clean up. A transporter must clean up any hazardous waste discharge that occurs during transportation...

  5. 77 FR 16548 - Clean Air Act Advisory Committee

    Science.gov (United States)

    2012-03-21

    ... AGENCY Clean Air Act Advisory Committee AGENCY: Environmental Protection Agency (EPA). ACTION: Request for Nominations to the Clean Air Act Advisory Committee. SUMMARY: The U.S. Environmental Protection... appointment to its Clean Air Act Advisory Committee (CAAAC). Applications are due by May 1, 2012 and...

  6. 48 CFR 52.236-12 - Cleaning Up.

    Science.gov (United States)

    2010-10-01

    ... 48 Federal Acquisition Regulations System 2 2010-10-01 2010-10-01 false Cleaning Up. 52.236-12 Section 52.236-12 Federal Acquisition Regulations System FEDERAL ACQUISITION REGULATION (CONTINUED... Cleaning Up. As prescribed in 36.512, insert the following clause: Cleaning Up (APR 1984) The...

  7. Clean Energy Solutions Center Services (Vietnamese Translation) (Fact Sheet)

    Energy Technology Data Exchange (ETDEWEB)

    2014-11-01

    This is the Vietnamese language translation of the Clean Energy Solutions Center (Solutions Center) fact sheet. The Solutions Center helps governments, advisors and analysts create policies and programs that advance the deployment of clean energy technologies. The Solutions Center partners with international organizations to provide online training, expert assistance, and technical resources on clean energy policy.

  8. Agentes de información Information Agents

    Directory of Open Access Journals (Sweden)

    Alfonso López Yepes

    2005-12-01

    Full Text Available Este artículo realiza un repaso sobre las tipologías de agentes de información y describe aspectos como movilidad, racionalidad y adaptatividad, y el ajuste final de estos conceptos a entornos distribuidos como Internet, donde este tipo de agentes tienen un amplio grado de aplicación. Asimismo, se propone una arquitectura de agentes para un sistema multiagente de recuperación de información donde se aplica un paradigma documental basado en el concepto de ciclo documental.This article summarizes the main information agent types reflecting on issues such as mobility, rationality, adaptability and the final adjustment of this concepts to distributed environments such as the Internet, where this kind of agents has wide range application. Likewise, an information agent architecture is proposed to create a multi-agent information retrieval system in which a documentary paradigm based on the documentary cycle is developed.

  9. Clean Code - Why you should care

    CERN Document Server

    CERN. Geneva

    2015-01-01

    - Martin Fowler Writing code is communication, not solely with the computer that executes it, but also with other developers and with oneself. A developer spends a lot of his working time reading and understanding code that was written by other developers or by himself in the past. The readability of the code plays an important factor for the time to find a bug or add new functionality, which in turn has a big impact on the productivity. Code that is difficult to undestand, hard to maintain and refactor, and offers many spots for bugs to hide is not considered to be "clean code". But what could considered as "clean code" and what are the advantages of a strict application of its guidelines? In this presentation we will take a look on some typical "code smells" and proposed guidelines to improve your coding skills to write cleaner code that is less bug prone and better to maintain.

  10. Clean Energy Works Oregon Final Technical Report

    Energy Technology Data Exchange (ETDEWEB)

    Jacob, Andria [City of Portland; Cyr, Shirley [Clean Energy Works

    2013-12-31

    In April 2010, the City of Portland received a $20 million award from the U.S. Department of Energy, as part of the Energy Efficiency and Conservation Block Grant program. This award was appropriated under the American Recovery and Reinvestment Act (ARRA), passed by President Obama in 2009. DOE’s program became known as the Better Buildings Neighborhood Program (BBNP). The BBNP grant objectives directed the City of Portland Bureau of Planning and Sustainability (BPS) as the primary grantee to expand the BPS-led pilot program, Clean Energy Works Portland, into Clean Energy Works Oregon (CEWO), with the mission to deliver thousands of home energy retrofits, create jobs, save energy and reduce carbon dioxide emissions.The Final Technical Report explores the successes and lessons learned from the first 3 years of program implementation.

  11. ANALYSIS ON TECHNOLOGICAL PROCESSES CLEANING OIL PIPELINES

    Directory of Open Access Journals (Sweden)

    Mariana PǍTRAŞCU

    2015-05-01

    Full Text Available In this paper the researches are presented concerning the technological processes of oil pipelines.We know several technologies and materials used for cleaning the sludge deposits, iron and manganese oxides, dross, stone, etc.de on the inner walls of drinking water pipes or industries.For the oil industry, methods of removal of waste materials and waste pipes and liquid and gas transport networks are operations known long, tedious and expensive. The main methods and associated problems can be summarized as follows: 1 Blowing with compressed air.2 manual or mechanical brushing, sanding with water or dry.3 Wash with water jet of high pressure, solvent or chemical solution to remove the stone and hard deposits.4 The combined methods of cleaning machines that use water jets, cutters, chains, rotary heads cutters, etc.

  12. Clean Slate 1 revegetation and monitoring plan

    International Nuclear Information System (INIS)

    This document is a reclamation plan for short-term and long-term stabilization of land disturbed by activities associated with interim cleanup of radionuclide-contaminated surface soil at the Clean Slate 1 site (located on the Tonopah Test Range). This document has been prepared to provide general reclamation practices and procedures that will be followed during restoration of the cleanup site. Reclamation demonstration plots were established near the Double Tracks cleanup site in the fall of 1994 to evaluate the performance of several native plant species and to evaluate different irrigation strategies. Results of that study, and the results from numerous other studies conducted at other sites (Area 11 and Area 19 of the Nevada Test Site), have been summarized and incorporated into this final reclamation plan for the cleanup of the Clean Slate 1 site. The plan also contains procedures for monitoring both short-term and long-term reclamation

  13. Self-cleaning surfaces - virtual realities

    Science.gov (United States)

    Blossey, Ralf

    2003-05-01

    In the 19th century, Oscar Wilde stated ``We live, I regret to say, in an age of surfaces''. Today, we do so even more, and we do not regret it: key advances in the understanding and fabrication of surfaces with controlled wetting properties are about to make the dream of a contamination-free (or 'no-clean') surface come true. Two routes to self-cleaning are emerging, which work by the removal of dirt by either film or droplet flow. Although a detailed understanding of the mechanisms underlying the behaviour of liquids on such surfaces is still a basic research topic, the first commercial products in the household-commodity sector and for applications in biotechnology are coming within reach of the marketplace. This progress report describes the current status of understanding of the underlying mechanisms, the concepts for making such surfaces, and some of their first applications.

  14. Self-cleaning surfaces--virtual realities.

    Science.gov (United States)

    Blossey, Ralf

    2003-05-01

    In the 19th century, Oscar Wilde stated "We live, I regret to say, in an age of surfaces". Today, we do so even more, and we do not regret it: key advances in the understanding and fabrication of surfaces with controlled wetting properties are about to make the dream of a contamination-free (or 'no-clean') surface come true. Two routes to self-cleaning are emerging, which work by the removal of dirt by either film or droplet flow. Although a detailed understanding of the mechanisms underlying the behaviour of liquids on such surfaces is still a basic research topic, the first commercial products in the household-commodity sector and for applications in biotechnology are coming within reach of the marketplace. This progress report describes the current status of understanding of the underlying mechanisms, the concepts for making such surfaces, and some of their first applications.

  15. Clean energy deployment: addressing financing cost

    Science.gov (United States)

    Ameli, Nadia; Kammen, Daniel M.

    2012-09-01

    New methods are needed to accelerate clean energy policy adoption. To that end, this study proposes an innovative financing scheme for renewable and energy efficiency deployment. Financing barriers represent a notable obstacle for energy improvements and this is particularly the case for low income households. Implementing a policy such as PACE—property assessed clean energy—allows for the provision of upfront funds for residential property owners to install electric and thermal solar systems and make energy efficiency improvements to their buildings. This paper will inform the design of better policies tailored to the creation of the appropriate conditions for such investments to occur, especially in those countries where most of the population belongs to the low-middle income range facing financial constraints.

  16. APSIC Guidelines for environmental cleaning and decontamination.

    Science.gov (United States)

    Ling, Moi Lin; Apisarnthanarak, Anucha; Thu, Le Thi Anh; Villanueva, Victoria; Pandjaitan, Costy; Yusof, Mohamad Yasim

    2015-01-01

    This document is an executive summary of APSIC Guidelines for Environmental Cleaning and Decontamination. It describes best practices in routine cleaning and decontamination in healthcare facilities as well as in specific settings e.g. management of patients with isolation precautions, food preparation areas, construction and renovation, and following a flood. It recommends the implementation of environmental hygiene program to keep the environment safe for patients, staff and visitors visiting a healthcare facility. Objective assessment of cleanliness and quality is an essential component of this program as a method for identifying quality improvement opportunities. Recommendations for safe handling of linen and bedding; as well as occupational health and safety issues are included in the guidelines. A training program is vital to ensure consistent adherence to best practices. PMID:26719796

  17. The Healy clean coal project: An overview

    Energy Technology Data Exchange (ETDEWEB)

    Olson, J.B.; McCrohan, D.V. [Alaska Industrial Development and Export Authority, Anchorage, AK (United States)

    1997-12-31

    The Healy Clean Coal Project, selected by the US Department of Energy under Round III of the Clean Coal Technology Program is currently in construction. The project is owned and financed by the Alaska Industrial Development and Export Authority (AIDEA), and is cofunded by the US Department of Energy. Construction is scheduled to be completed in August of 1997, with startup activity concluding in December of 1997. Demonstration, testing and reporting of the results will take place in 1998, followed by commercial operation of the facility. The emission levels of NOx, SO{sub 2} and particulates from this 50 megawatt plant are expected to be significantly lower than current standards. The project status, its participants, a description of the technology to be demonstrated, and the operational and performance goals of this project are presented.

  18. Extending CO2 cryogenic aerosol cleaning for advanced optical and EUV mask cleaning

    Science.gov (United States)

    Varghese, Ivin; Bowers, Charles W.; Balooch, Mehdi

    2011-11-01

    Cryogenic CO2 aerosol cleaning being a dry, chemically-inert and residue-free process is used in the production of optical lithography masks. It is an attractive cleaning option for the mask industry to achieve the requirement for removal of all printable soft defects and repair debris down to the 50nm printability specification. In the technique, CO2 clusters are formed by sudden expansion of liquid from high to almost atmospheric pressure through an optimally designed nozzle orifice. They are then directed on to the soft defects or debris for momentum transfer and subsequent damage free removal from the mask substrate. Unlike aggressive acid based wet cleaning, there is no degradation of the mask after processing with CO2, i.e., no critical dimension (CD) change, no transmission/phase losses, or chemical residue that leads to haze formation. Therefore no restriction on number of cleaning cycles is required to be imposed, unlike other cleaning methods. CO2 aerosol cleaning has been implemented for several years as full mask final clean in production environments at several state of the art mask shops. Over the last two years our group reported successful removal of all soft defects without damage to the fragile SRAF features, zero adders (from the cleaning and handling mechanisms) down to a 50nm printability specification. In addition, CO2 aerosol cleaning is being utilized to remove debris from Post-RAVE repair of hard defects in order to achieve the goal of no printable defects. It is expected that CO2 aerosol cleaning can be extended to extreme ultraviolet (EUV) masks. In this paper, we report advances being made in nozzle design qualification for optimum snow properties (size, velocity and flux) using Phase Doppler Anemometry (PDA) technique. In addition the two new areas of focus for CO2 aerosol cleaning i.e. pellicle glue residue removal on optical masks, and ruthenium (Ru) film on EUV masks are presented. Usually, the residue left over after the pellicle

  19. Gas Cleaning with Granular Bed Filter

    OpenAIRE

    Ødegård, Johnny

    2009-01-01

    A literature study is first presented then the practical experiments are described. The theoretical chapter provides an overview of filtration mechanisms and available gas cleaning technologies, with an emphasis on hot gas and cake filtration. The experimental chapters describe the setup and testing of the filter tray test rig and the L10-56 test rig. The filter tray test rig was built, instrumentation was installed and programming performed. Puff-back calibration and heating tests were pe...

  20. Clean Water Act (excluding Section 404)

    Energy Technology Data Exchange (ETDEWEB)

    1993-01-15

    This Reference Book contains a current copy of the Clean Water Act (excluding Section 404) and those regulations that implement the statutes and appear to be most relevant to US Department of Energy (DOE) activities. The document is provided to DOE and contractor staff for informational purposes only and should not be interpreted as legal guidance. Updates that include important new requirements will be provided periodically. Questions concerning this Reference Book may be directed to Mark Petts, EH-231 (202/586-2609).

  1. Self-Cleaning Antireflective Optical Coatings

    OpenAIRE

    Guldin, Stefan; Kohn, Peter; Stefik, Morgan; Song, Juho; Divitini, Giorgio; Ecarla, Fanny; Ducati, Caterina; Wiesner, Ulrich; Steiner, Ullrich

    2013-01-01

    Low-cost antireflection coatings (ARCs) on large optical surfaces are an ingredient-technology for high-performance solar cells. While nanoporous thin films that meet the zero-reflectance conditions on transparent substrates can be cheaply manufactured, their suitability for outdoor applications is limited by the lack of robustness and cleanability. Here, we present a simple method for the manufacture of robust self-cleaning ARCs. Our strategy relies on the self-assembly of a block-copolymer ...

  2. Research of the heliostat cleaning method

    Energy Technology Data Exchange (ETDEWEB)

    Zhang, Xiliang; Liu, Xiaobin [Himin Solar Energy Group Co., Ltd, Dezhou City (China); Wang, Zhifeng [CAS, Beijing (China). Inst. of Electrical Engineering

    2008-07-01

    Heliostat is the core component of Solar Power Tower system. It can straightly affect the efficiency of whole system. Because the heliostats run outside, and are discovered in the air, dust and dirt accumulates gradually on the surface of reflector. Then, it will gradually decrease the reflectivity of mirror so that reduce the whole efficiency. The article analyzed environment factors, and researched selecting availably cleaning method of heliostat for different conditions. (orig.)

  3. Conceptualizations for cleaning OTEC heat exchangers

    Energy Technology Data Exchange (ETDEWEB)

    Rice, M.S.; Hagel, D.; Conn, A.F.

    1978-09-01

    A critical operating aspect of Ocean Thermal Energy Conversion (OTEC) plants is the maintenance of clean surfaces on the seawater-side of the heat exchangers. The objective of this program was to assess the state of the art of biofouling control techniques and to evaluate the potential of these existing methods for solving the biofouling problems in the OTEC system. The first task of the program involved an in-depth review and discussion of various fouling control methods including water treatment, surface conditioning, and cleaning techniques. The methods considered applicable to OTEC were identified. This volume summarizes the second task of the program. The compatibility of the various cleaning and fouling control techniques with the different proposed heat exchanger designs and materials are discussed. Also provided are conceptual illustrations for adapting and incorporating the methods into an OTEC power plant. These conceptual designs suggest means for overcoming some of the shortcomings of the techniques which are considered suitable, however, detailed designs of the modified systems are beyond the scope of this report. Chlorination, chemical cleaning, Amertap recirculating sponge rubber balls, and MAN flow-driven brushes are the methods considered applicable for tubular heat exchangers with seawater inside the tubes. Water jets are suggested for the open-cycle and the ''trombone'' (Applied Physics Laboratory) heat exchanger designs. Although none of the methods are immediately applicable to OTEC in their present configuration, in several cases only minor developmental efforts should produce designs which can satisfy the stringent OTEC cleanliness requirements. Further research and development appear warranted for a number of other methods which indicate promise for long-range applicability. Specific recommendations are included.

  4. Clean Energy Cooperation Steering in Fast Track

    Institute of Scientific and Technical Information of China (English)

    Rose Yan

    2009-01-01

    @@ Cooperation, it is a win-win choice for China and the US. Cooperation has almost become the hottest buzz word in the energy sector globally. During the US President Obama's visit to China recently, China and the US made agreement on the climate change, energy and environment sectors and put forward specific measures for jointly promoting development in these fields, further heating the cooperation between China and the US in the clean energy sector.

  5. The Dalian National Laboratory for Clean Energy.

    Science.gov (United States)

    Zhang, Tao; Li, Can; Bao, Xinhe

    2012-05-01

    The Dalian Institute of Chemical Physics (DICP), Chinese Academy of Sciences conducts fundamental and applied research towards chemistry and chemical engineering, with strong competence in the development of new technologies. The research in this special issue, containing 19 papers, features some of the DICP's best work on sustainable energy, use of environmental resources, and advanced materials within the framework of the Dalian National Laboratory for Clean Energy (DNL). PMID:22573532

  6. Cleaning verification by air/water impingement

    Science.gov (United States)

    Jones, Lisa L.; Littlefield, Maria D.; Melton, Gregory S.; Caimi, Raoul E. B.; Thaxton, Eric A.

    1995-01-01

    This paper will discuss how the Kennedy Space Center intends to perform precision cleaning verification by Air/Water Impingement in lieu of chlorofluorocarbon-113 gravimetric nonvolatile residue analysis (NVR). Test results will be given that demonstrate the effectiveness of the Air/Water system. A brief discussion of the Total Carbon method via the use of a high temperature combustion analyzer will also be given. The necessary equipment for impingement will be shown along with other possible applications of this technology.

  7. Aviation, Carbon, and the Clean Air Act

    OpenAIRE

    Richardson, Nathan

    2012-01-01

    This paper explores the policy options available to the United States for regulating greenhouse gas emissions from aircraft under existing law: the Clean Air Act (CAA). Europe has unilaterally and controversially moved to include aviation emissions in its Emissions Trading System. The United States can, however, allow its airlines to escape this requirement by imposing “equivalent” regulation. U.S. aviation emissions rules could also have significant environmental benefits and would limit dom...

  8. The Dalian National Laboratory for Clean Energy.

    Science.gov (United States)

    Zhang, Tao; Li, Can; Bao, Xinhe

    2012-05-01

    The Dalian Institute of Chemical Physics (DICP), Chinese Academy of Sciences conducts fundamental and applied research towards chemistry and chemical engineering, with strong competence in the development of new technologies. The research in this special issue, containing 19 papers, features some of the DICP's best work on sustainable energy, use of environmental resources, and advanced materials within the framework of the Dalian National Laboratory for Clean Energy (DNL).

  9. African perspectives on the clean development mechanism

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-08-01

    The papers, which are all written from an African perspective, are an important contribution to the debate surrounding the relevance and applicability of the Clean Development Mechanism in Africa. In addition to sector-specific discussions on the prospects for CDM in the energy, transport, industry and forestry sectors, various authors have attempted to tackle complex issues related to the instituional design of CDM, its mode of operation, participatory implementation and methodological questions such as baselines and additionality. (au)

  10. Clean Valuation Framework for the USD Silo

    OpenAIRE

    Masaaki Fujii; Akihiko Takahashi

    2011-01-01

    In the forthcoming ISDA Standard Credit Support Annex (SCSA), the trades denominated in non-G5 currencies as well as those include multiple currencies are expected to be allocated to the USD silo, where the contracts are collateralized by USD cash, or a different currency with an appropriate interest rate overlay to achieve the same economic effects. In this paper, we have presented a simple generic valuation framework for the clean price under the USD silo with the the detailed procedures fo...

  11. Characterization of Occupational Exposures to Cleaning Products Used for Common Cleaning Tasks-A Pilot Study of Hospital Cleaners

    OpenAIRE

    Perry Melissa J; Quinn Margaret M; Bello Anila; Milton Donald K

    2009-01-01

    Abstract Background In recent years, cleaning has been identified as an occupational risk because of an increased incidence of reported respiratory effects, such as asthma and asthma-like symptoms among cleaning workers. Due to the lack of systematic occupational hygiene analyses and workplace exposure data, it is not clear which cleaning-related exposures induce or aggravate asthma and other respiratory effects. Currently, there is a need for systematic evaluation of cleaning products ingred...

  12. Lipid-lowering agents.

    Science.gov (United States)

    Ewang-Emukowhate, Mfon; Wierzbicki, Anthony S

    2013-09-01

    The role of lipid lowering in reducing the risk of mortality and morbidity from cardiovascular disease (CVD) is well established. Treatment particularly aimed at decreasing low-density lipoprotein cholesterol (LDL-C) is effective in reducing the risk of death from coronary heart disease and stroke. Statins form the cornerstone of treatment. However, in some individuals with a high risk of CVD who are unable to achieve their target LDL-C due to either intolerance or lack of efficacy, there is the need for alternative therapies. This review provides an overview of the different classes of currently available lipid-lowering medications including statins, fibrates, bile acid sequestrants (resins), and omega-3 fatty acids. Data are presented on their indications, pharmacology, and the relevant end point clinical trial data with these drugs. It also discusses the human trial data on some novel therapeutic agents that are being developed including those for homozygous familial hypercholesterolemia--the antisense oligonucleotide mipomersen and the microsomal transfer protein inhibitor lomitapide. Data are presented on phase II and III trials on agents with potentially wider applications, cholesterol ester transfer protein inhibitors and proprotein convertase subtilisin kexin 9 inhibitors. The data on a licensed gene therapy for lipoprotein lipase deficiency are also presented.

  13. Advances in antithrombotic agents.

    Science.gov (United States)

    Chakrabarti, Ranjan; Das, Saibal Kumar

    2007-07-01

    Thrombosis is the condition where an imbalance in the homeostatic mechanism results in unwanted intravascular thrombus formation. Imbalances in this highly regulated process of coagulation and anticoagulation can lead to a variety of pathophysiological conditions leading to stroke, pulmonary heart attack and other serious conditions. In the western world, thromboembolic diseases are the leading cause of morbidity and mortality. Remarkable progress has occurred over the last decade in the development of antithrombotic drugs, which can be classified into 3 major categories - Anticoagulants, Antiplatelets and thrombolytics. Increased understanding of the pathobiology of thrombotic and vascular disorders has helped researchers to target novel pathways involving the coagulation, thrombolytic, fibrinolytic and integrin systems. Traditionally aspirin and unfractionated heparin was used for myocardial infarction. Newer antiplatelet agents such as, clopidogrel, GP IIb/IIIa inhibitors, low molecular weight heparin, direct thrombin inhibitors and several improved thrombolytic agents have been introduced for clinical use. This review will discuss different important drugs, which have been launched in recent years and also some new targets pursued by different companies. PMID:17630943

  14. Holograms as Teaching Agents

    Science.gov (United States)

    Walker, Robin A.

    2013-02-01

    Hungarian physicist Dennis Gabor won the Pulitzer Prize for his 1947 introduction of basic holographic principles, but it was not until the invention of the laser in 1960 that research scientists, physicians, technologists and the general public began to seriously consider the interdisciplinary potentiality of holography. Questions around whether and when Three-Dimensional (3-D) images and systems would impact American entertainment and the arts would be answered before educators, instructional designers and students would discover how much Three-Dimensional Hologram Technology (3DHT) would affect teaching practices and learning environments. In the following International Symposium on Display Holograms (ISDH) poster presentation, the author features a traditional board game as well as a reflection hologram to illustrate conventional and evolving Three-Dimensional representations and technology for education. Using elements from the American children's toy Operation® (Hasbro, 2005) as well as a reflection hologram of a human brain (Ko, 1998), this poster design highlights the pedagogical effects of 3-D images, games and systems on learning science. As teaching agents, holograms can be considered substitutes for real objects, (human beings, organs, and animated characters) as well as agents (pedagogical, avatars, reflective) in various learning environments using many systems (direct, emergent, augmented reality) and electronic tools (cellphones, computers, tablets, television). In order to understand the particular importance of utilizing holography in school, clinical and public settings, the author identifies advantages and benefits of using 3-D images and technology as instructional tools.

  15. HYDRO-ABRASIVE JET CLEANING TECHNOLOGY OF STEEL SHEETS DESIGNED FOR LASER CUTTING

    Directory of Open Access Journals (Sweden)

    I. Kachanov

    2013-01-01

    Full Text Available Investigations executed by the BNTU “Shipbuilding and hydraulics” department have shown that rather efficient implementation of the requirements to the metal sheet surface designed for laser cutting can be achieved by using hydro-abrasive jet cleaning while applying water pump equipment with the range of pressure – 20–40 MPa. Type of working fluid plays a significant role for obtaining surface of the required quality. The conducted experiments have demonstrated that the efficient solution of the assigned problems can be ensured by using a working fluid containing bentonite clay, surface-active agent polyacrylamide, soda ash and the rest water.

  16. Clean Cities 2012 Annual Metrics Report

    Energy Technology Data Exchange (ETDEWEB)

    Johnson, C.

    2013-12-01

    The U.S. Department of Energy's (DOE) Clean Cities program advances the nation's economic, environmental, and energy security by supporting local actions to cut petroleum use in transportation. A national network of nearly 100 Clean Cities coalitions brings together stakeholders in the public and private sectors to deploy alternative and renewable fuels, idle-reduction measures, fuel economy improvements, and new transportation technologies, as they emerge. Each year DOE asks Clean Cities coordinators to submit annual reports of their activities and accomplishments for the previous calendar year. Data and information are submitted via an online database that is maintained as part of the Alternative Fuels Data Center (AFDC) at the National Renewable Energy Laboratory (NREL). Coordinators submit a range of data that characterizes the membership, funding, projects, and activities of their coalitions. They also submit data about sales of alternative fuels, deployment of alternative fuel vehicles (AFVs) and hybrid electric vehicles (HEVs), idle-reduction initiatives, fuel economy activities, and programs to reduce vehicle miles traveled (VMT). NREL analyzes the data and translates them into petroleum-use reduction impacts, which are summarized in this report.

  17. TORR system polishes oily water clean

    International Nuclear Information System (INIS)

    The TORR (total oil recovery and remediation) system utilizes a specially patented polymer material, similar to styrofoam, which is used to get rid of non-soluble hydrocarbons from water. An application in Fort Smith, Northwest Territories, is described where it was used to recover diesel oil, which had been seeping into the groundwater over a period of 20 years. About 100,000 gallons of heating oil had leached into the water; TORR removed the non-soluble hydrocarbons, while another piece of equipment removed the soluble portions. After treatment the water tested consistently at non-detectable levels and was clean enough to be discharged into the town's sewer system. The system is considered ideal for oil spills clean-up underground, onshore, or the open sea, but it also has many potentially useful applications in industrial and oilfield applications. Water used in steam injection and water floods to produce heavy oil and SAGD applications are some of the obvious ones that come to mind. Cleaning up the huge tailings ponds at the mining and processing of oil sands, and removing diluent from water that is used to thin out bitumen in pipelines so that it can be transported to processing plants, are other promising areas of application. Several field trials to test the effectiveness of the system in these type of applications are scheduled for the summer and fall of 2002

  18. Regional Effort to Deploy Clean Coal Technologies

    Energy Technology Data Exchange (ETDEWEB)

    Gerald Hill; Kenneth Nemeth; Gary Garrett; Kimberly Sams

    2009-01-31

    The Southern States Energy Board's (SSEB) 'Regional Effort to Deploy Clean Coal Technologies' program began on June 1, 2003, and was completed on January 31, 2009. The project proved beneficial in providing state decision-makers with information that assisted them in removing barriers or implementing incentives to deploy clean coal technologies. This was accomplished through two specific tasks: (1) domestic energy security and diversity; and (2) the energy-water interface. Milestones accomplished during the project period are: (1) Presentations to Annual Meetings of SSEB Members, Associate Member Meetings, and the Gasification Technologies Council. (2) Energy: Water reports - (A) Regional Efforts to Deploy Clean Coal Technologies: Impacts and Implications for Water Supply and Quality. June 2004. (B) Energy-Water Interface Challenges: Coal Bed Methane and Mine Pool Water Characterization in the Southern States Region. 2004. (C) Freshwater Availability and Constraints on Thermoelectric Power Generation in the Southeast U.S. June 2008. (3) Blackwater Interactive Tabletop Exercise - Decatur, Georgia April 2007. (4) Blackwater Report: Blackwater: Energy and Water Interdependency Issues: Best Practices and Lessons Learned. August 2007. (5) Blackwater Report: BLACKWATER: Energy Water Interdependency Issues REPORT SUMMARY. April 2008.

  19. Cleaning Study of Genesis Sample 60487

    Science.gov (United States)

    Kuhlman, Kim R.; Rodriquez, M. C.; Gonzalez, C. P.; Allton, J. H.; Burnett, D. S.

    2013-01-01

    The Genesis mission collected solar wind and brought it back to Earth in order to provide precise knowledge of solar isotopic and elemental compositions. The ions in the solar wind were stopped in the collectors at depths on the order of 10 to a few hundred nanometers. This shallow implantation layer is critical for scientific analysis of the composition of the solar wind and must be preserved throughout sample handling, cleaning, processing, distribution, preparation and analysis. Particles of Genesis wafers, brine from the Utah Testing Range and an organic film have deleterious effects on many of the high-resolution instruments that have been developed to analyze the implanted solar wind. We have conducted a correlative microscopic study of the efficacy of cleaning Genesis samples with megasonically activated ultrapure water and UV/ozone cleaning. Sample 60487, the study sample, is a piece of float-zone silicon from the B/C array approximately 4.995mm x 4.145 mm in size

  20. Steam vacuum cleaning. Innovative technology summary report

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-05-01

    The US Department of Energy (DOE) continually seeks safer and more cost-effective remediation technologies for use in the decontamination and decommissioning (D and D) of nuclear facilities. The baseline technology currently used for washing debris is a high-pressure water cleaning (HPWC) system. The system used at the FEMP is the Hotsy{reg_sign} Model 550B HPWC. Although the HPWC technology has functioned satisfactorily, improvements are being sought in areas related to reduced liquid waste volume, increased productivity, increased washing effectiveness, and decreased airborne contamination. An innovative technology that offers potential improvements in these areas is a steam vacuum cleaning (SVC) system that integrates high-pressure steam cleaning with a vacuum recovery sub-system that simultaneously collects dislodged contaminants thereby reducing airborne contamination. The SVC system selected for demonstration at the FEMP was the Kelly{trademark} Decontamination System shown. This report provides comparative performance and cost analyses between the Hotsy HPWC system and the Kelly Decontamination System. Both technologies were demonstrated at the FEMP site located at Fernald, Ohio from July 29, 1996 through August 15, 1996. The demonstrations were conducted at the FEMP Plant 1 as part of the LSTD project sponsored by the Deactivation and Decommissioning Focus Area (DDFA) of the US DOE`s Office of Science and Technology.

  1. Environmental issues affecting clean coal technology deployment

    Energy Technology Data Exchange (ETDEWEB)

    Miller, M.J. [Electric Power Research Inst., Palo Alto, CA (United States)

    1997-12-31

    The author outlines what he considers to be the key environmental issues affecting Clean Coal Technology (CCT) deployment both in the US and internationally. Since the international issues are difficult to characterize given different environmental drivers in various countries and regions, the primary focus of his remarks is on US deployment. However, he makes some general remarks, particularly regarding the environmental issues in developing vs. developed countries and how these issues may affect CCT deployment. Further, how environment affects deployment depends on which particular type of clean coal technology one is addressing. It is not the author`s intention to mention many specific technologies other than to use them for the purposes of example. He generally categorizes CCTs into four groups since environment is likely to affect deployment for each category somewhat differently. These four categories are: Precombustion technologies such as coal cleaning; Combustion technologies such as low NOx burners; Postcombustion technologies such as FGD systems and postcombustion NOx control; and New generation technologies such as gasification and fluidized bed combustion.

  2. Evaluation of boiler chemical cleaning techniques

    International Nuclear Information System (INIS)

    The EPRI/SGOG process, which has been selected by Ontario Hydro for use at the Bruce A station, is described. This process consists of alternating iron removal and copper removal steps, the two metals which comprise the bulk of the deposit in the Bruce A SGs. The iron removal solvent consists of ethylenediameinetetraacetic acid (EDTA), hydrazine, ammonium hydroxide and a proprietary corrosion inhibitor CCI-801. The copper removal solvent consists of EDTA, ethylene diamine and hydrogen peroxide. Ontario Hydro proposes to clean a bank of four SGs in parallel employing a total of six copper removal steps and four iron removal steps. Cleaning all eight SGs in a single Bruce A unit will generate 2,200 m3 of liquid waste which will be treated by a wet air oxidation process. The iron and copper sludges will be buried in a landfill site while the liquid waste will be further treated by the Bruce sewage treatment plant. Some ammonia vapour will be generated through the wet air oxidation process and will be vented through a stack on top of the high bay of the spent solvent treatment plant. With the exception of the proprietary corrosion inhibitor, all chemicals that will be employed in the cleaning and waste treatment operations are standard industrial chemicals which are well characterized. No extraordinary hazards are anticipated with their use as long as adequate safety precautions are taken

  3. Method of cleaning sodium-contaminated equipments

    International Nuclear Information System (INIS)

    Purpose: To efficiently remove hydrogen resulted from chemical reaction between sodium and cleaning liquid out of a cleaning tank and regenerate the removed hydrogen as water under the safety oxidizing treatment. Constitution: Exhaust gases from a cleaning system from which alcoholic vapors have been separated are conditioned for the flow rate so that the hydrogen concentration is kept higher than 75 volume %, that is, the explosive limit and sent to a hydrogen gas processing device. The hydrogen-containing exhaust gases adjusted to such a safety flow rate are reacted in an oxidizer with oxygen contained in air supplied thereto and converted into steams. The steam, airs or the likes treated in the oxidizer are cooled in contact with a cooling pipe introduced from a cooler and only the steams are condensated and recovered as water. Then, the water is stored from the cooler to a water-store tank and the amount is monitored by a level meter disposed at the upper portion of the tank. Remaining airs are discharged by way of the cooler. (Yoshihara, H.)

  4. Agent-oriented Software Engineering

    Institute of Scientific and Technical Information of China (English)

    GUAN Xu; CHENG Ming; LIU Bao

    2001-01-01

    An increasing number of computer systems are being viewed in terms of autonomous agents.Most people believe that agent-oriented approach is well suited to design and build complex systems. Yet. todate, little effort had been devoted to discuss the advantages of agent-oriented approach as a mainstreamsoftware engineering paradigm. Here both of this issues and the relation between object-oriented and agent-oriented will be argued. we describe an agent-oriented methodology and provide a quote for designing anauction system.

  5. Joint Implementation, Clean Development Mechanism and Tradable Permits

    Energy Technology Data Exchange (ETDEWEB)

    Nielsen, L.; Rose Olsen, K.

    2000-06-01

    This report deals with international environmental instruments aimed at a cost-effective reduction of greenhouse gas emissions. More precisely the instruments mentioned in the Kyoto Protocol, namely Joint Implementation (JI), the Clean Development Mechanism (CDM) and Tradable Permits (TP). The report describes the background for the international co-operation on reducing the greenhouse gases and the background for the instruments. How the instruments work in theory and what the practical problems may be. What agents' incentives are when they engage in JI or CDM, and how the initiation of the instruments can be organised. The institutional frameworks for JI, CDM and TP are discussed. The report describes how the Kyoto instruments and the Kyoto commitments interact with other instruments and describe distributive effects between countries. It is analysed how the use of CDM may influence the developing countries incentives to participate in the coalition of committed countries. In the concluding chapter some recommendations on the use of JI, TP and CDM are given. The recommendations are a kind of dialog with especially the Norwegian and Swedish reports on tradable permits. Some of the issues described in this main report are analysed in separate working papers. The working papers are collected in an appendix to the main report. (au)

  6. Handbook for cleaning for semiconductor manufacturing fundamentals and applications

    CERN Document Server

    Reinhardt, Karen A

    2011-01-01

    This comprehensive volume provides an in-depth discussion of the fundamentals of cleaning and surface conditioning of semiconductor applications such as high-k/metal gate cleaning, copper/low-k cleaning, high dose implant stripping, and silicon and SiGe passivation. The theory and fundamental physics associated with wet etching and wet cleaning is reviewed, plus the surface and colloidal aspects of wet processing. Formulation development practices and methodology are presented along with the applications for preventing copper corrosion, cleaning aluminum lines, and other sensitive layers. This

  7. Nanometer-scale lithography on microscopically clean graphene

    DEFF Research Database (Denmark)

    van Dorp, W. F.; Zhang, X.; Feringa, B. L.;

    2011-01-01

    to the deposition behavior on amorphous materials. Prior to the deposition experiment, the few-layer graphene was cleaned. Typically, it is observed in electron microscope images that areas of microscopically clean graphene are surrounded by areas with amorphous material. We present a method to remove the amorphous...... material in order to obtain large areas of microscopically clean graphene flakes. After cleaning, W(CO)6 was used as the precursor to study the early growth phase of FEBID deposits. It was observed that preferential adsorption of the precursor molecules on step edges and adsorbates plays a key role...... in the deposition on cleaned few-layer graphene....

  8. Ensuring clean air: Developing a clean air strategy for British Columbia

    International Nuclear Information System (INIS)

    In 1992, a clean air strategy will be developed to incorporate views of British Columbians on ways to meet goals related to air quality. A discussion paper is presented to provide information to those interested in participation in developing this strategy. The paper gives information on air quality issues important to the province, including local air quality, urban smog, ozone layer depletion, and global climate change. The views and concerns expressed by stakeholders who attended the Clean Air Conference in 1991 are summarized. The process used to develop the clean air strategy is outlined and some outcomes to be anticipated from the strategy are suggested, including policies and priorities for action to ensure clean air. Air pollutants of concern are total reduced sulfur, mainly from pulp mills and gas processing plants; smoke from wood burning; sulfur dioxide from pulp mills and gas plants; hydrogen fluoride from aluminum smelting; ground-level ozone in urban areas; and acid rain. Elements of a clean air strategy include a smoke management policy, management strategies for greenhouse gases and ozone smog, ozone layer protection measures, regional air quality management plans, and long-term planning efforts in energy use, transportation modes, community design, and land use. 12 refs., 14 figs., 2 tabs

  9. On Strongly J 2-clean Rings 1%强J 12-clean

    Institute of Scientific and Technical Information of China (English)

    董李青

    2015-01-01

    定义了环R的一个子集,记做 J(R)={a∈ R|a2∈ J(R)}。称环R中的一个元素a是强J 12‐clean元,如果存在一个幂等元e ∈ R和一个元素w ∈ J(R)使得 a= e+ w且ew = we 。如果环R中每个元素都是强 J 12‐clean元,称环R是强J 12‐clean环。文章研究了强 J 12‐clean环的一些性质和局部环上矩阵环的强J 12‐clean性。%A subset of R is defined and marked as J(R)={a∈ R|a2 ∈ J(R)} .An element a∈ R is called strongly J12‐clean element ,provided that there exists an idempotent e∈ R and an element w∈ J(R) such that a= e+ w and ew= we .A ring R is strongly J12‐clean ring if every element in R is strongly J12‐clean element .This article studies the properties of strongly J12‐clean ring and the property of strongly J12‐clean of matrix rings on local rings .

  10. Chemical cleaning of the condenser tubes of Baersebaeck 2 - Experiences

    International Nuclear Information System (INIS)

    During the summer of 1980 the condenser tubes of Barsebaeck 2 were acid cleaned due to the following reasons: 1) significant heat transfer losses 2) possible passivation of attacks filled with corrosion products 3) encouraging experiences from acid cleaning of Danish units 4) less encouraging experiences from mechanical cleaning. Prior to the acid cleaning some laboratory experiments were performed to investigate the effect of pH-value and temperature on the time required for cleaning. In spite of practical problems including loss of acid and cavitating pumps the acid cleaning was performed in less than 24 hours/condenser section. The result of the acid cleaning was better than the result of mechanical methods employed earlier. There was a significant increase in heat transfer efficiency. In two of the condenser sections the tubes were completely free of corrosion products after acid cleaning and cleaning with the Taprogge system. In the two remaining condenser sections some corrosion products were observed in a few deep attacks. This is due to a higher pH-value suring the cleaning of these two sections than during the cleaning of the two first sections. There were no indications of any acid leaking to the steam side of the condenser. (Author)

  11. High frequency of postcoital penis cleaning in Budongo chimpanzees.

    Science.gov (United States)

    O'Hara, Sean J; Lee, Phyllis C

    2006-01-01

    Cultural or tool use behaviours are typically conducted in social or food procurement contexts where the individual interacts with conspecifics, heterospecifics or environmental features. We report on postcoital penis cleaning in chimpanzees, an activity that does not fit this pattern. In penis cleaning, leaves are employed as 'napkins' to wipe clean the penis after sex. Alternatively, the same cleaning motion can be done without leaves, simply using the fingers. Not all chimpanzee communities studied across Africa clean their penes and, where documented, the behaviour is rare. By contrast, we identify postcoital penis cleaning in Budongo Forest, Uganda, as customary and corroborate penis cleaning as another cultural trait in chimpanzees, one that is specific to only a subset of the eastern subspecies of chimpanzee (Pan troglodytes schweinfurthii). PMID:16912503

  12. NOVEL GAS CLEANING/CONDITIONING FOR INTEGRATED GASIFICATION COMBINED CYCLE

    Energy Technology Data Exchange (ETDEWEB)

    Dennis A. Horazak; Richard A. Newby; Eugene E. Smeltzer; Rachid B. Slimane; P. Vann Bush; James L. Aderhold Jr; Bruce G. Bryan

    2005-12-01

    Development efforts have been underway for decades to replace dry-gas cleaning technology with humid-gas cleaning technology that would maintain the water vapor content in the raw gas by conducting cleaning at sufficiently high temperature to avoid water vapor condensation and would thus significantly simplify the plant and improve its thermal efficiency. Siemens Power Generation, Inc. conducted a program with the Gas Technology Institute (GTI) to develop a Novel Gas Cleaning process that uses a new type of gas-sorbent contactor, the ''filter-reactor''. The Filter-Reactor Novel Gas Cleaning process described and evaluated here is in its early stages of development and this evaluation is classified as conceptual. The commercial evaluations have been coupled with integrated Process Development Unit testing performed at a GTI coal gasifier test facility to demonstrate, at sub-scale the process performance capabilities. The commercial evaluations and Process Development Unit test results are presented in Volumes 1 and 2 of this report, respectively. Two gas cleaning applications with significantly differing gas cleaning requirements were considered in the evaluation: IGCC power generation, and Methanol Synthesis with electric power co-production. For the IGCC power generation application, two sets of gas cleaning requirements were applied, one representing the most stringent ''current'' gas cleaning requirements, and a second set representing possible, very stringent ''future'' gas cleaning requirements. Current gas cleaning requirements were used for Methanol Synthesis in the evaluation because these cleaning requirements represent the most stringent of cleaning requirements and the most challenging for the Filter-Reactor Novel Gas Cleaning process. The scope of the evaluation for each application was: (1) Select the configuration for the Filter-Reactor Novel Gas Cleaning Process, the arrangement of the

  13. MORBIDITY AGENTS: A REVIEW

    Directory of Open Access Journals (Sweden)

    Shrivastava Neelesh

    2011-09-01

    Full Text Available This paper discuss on clinical representation of morbid jealousy which often termed delusional jealousy or ‘Othello Syndrome’ is a psychiatric condition where a lover believes against all reason and their beloved is being sexually unfaithful. Patients will be preoccupied with their partner’s perceived lack of sexual fidelity and will often behave in an unacceptable or extreme way as they endeavor to prove their ideas. Misuse of any psychomotor is an important association cause morbidity jealousy agents, like CNS stimulants that release the catecholamine, particularly dopamine, from pre synaptic terminals substance should be treated as a priority. Where higher levels of violence are reported Sildenafil may be useful as a diagnostic as well as therapeutic test in such cases .Many studies have shown an association between high alcohol consumption and developing morbid jealousy. Amphetamine-induced psychosis has been extensively studied because of its close resemblance to schizophrenia.

  14. Product and Agent

    DEFF Research Database (Denmark)

    Montecino, Alex; Valero, Paola

    2015-01-01

    In this paper we will explore how the “mathematics teacher” becomes a subject and, at the same time, is subjected as part of diverse dispositive of power. We argue that the mathematics teacher becomes both a product and a social agent, which has been set, within current societies, from the ideas...... of globalization, social progress, and competitive logic. For our approximation, we use the concepts societies of control, dispositive, and discourses from a Foucault–Deleuze toolbox. Our purpose is to cast light on the social and cultural constitution of the ways of thinking about the mathematics teacher. Hence......, our critical examination offers understandings about how mathematics teachers are part of the larger cultural politics of schooling and education....

  15. Mushrooms as therapeutic agents

    Directory of Open Access Journals (Sweden)

    Sushila Rathee

    2012-04-01

    Full Text Available Mushrooms have been known for their nutritional and culinary values and used as medicines and tonics by humans for ages. In modern terms, they can be considered as functional foods which can provide health benefits beyond the traditional nutrients. There are monographs that cover the medicinal and healing properties of some individual traditional mushrooms. There has been a recent upsurge of interest in mushrooms not only as a health food which is rich in protein but also as a source of biologically active compounds of medicinal value which include complementary medicine/dietary supplements for anticancer, antiviral, hepatoprotective, immunopotentiating and hypocholesterolemic agents. However the mechanisms of the various health benefits of mushrooms to humans still require intensive investigation, especially given the emergence of new evidence of their health benefits. In the present paper the medicinal potential of mushrooms is being discussed.

  16. Newer Hemostatic Agents.

    Science.gov (United States)

    Franchini, Massimo; Favaloro, Emmanuel J; Lippi, Giuseppe

    2015-10-01

    The mainstay of treatment of inherited coagulation disorders is based on the infusion of the deficient clotting factor, when available. Significant advances have been made over the past two decades in the production and availability of factor replacement products. In spite of such progression, several issue are still unsolved, the most important being the need for frequent factor concentrate infusions and the development of inhibitory alloantibodies. To overcome these important limitations, several newer hemostatic agents with an extended half-life are at an advanced stage of clinical development. After a brief overview of hemostasis, this narrative review summarizes the current knowledge on the most promising novel products for hemostasis. The current status of gene therapy for hemophilia, the only therapeutic option to definitively cure this inherited bleeding disorder, is also concisely discussed. PMID:25893779

  17. Microencapsulation of chemotherapeutic agents

    International Nuclear Information System (INIS)

    Mixing various amounts of chemotherapeutic agents such as cisplatinum, 5-fluorouracil, mitomycin-C, and adriamycin with polymers such as poly-d, 1-lactide, ethylhydroxyethylcellulose, and polycaprolactone, several kinds of microcapsules were made. Among them, microcapsule made from ethylhydroxyethylcellulose showed best yield. Under light microscopy, the capsules were observed as particles with refractive properties. For the basic toxicity test, intraarterial administration of cisplatinum was done in 6 adult mongrel dogs. Follow-up angiography was accomplished in 2 wk intervals for 6 wks. Despite no significant difference in the histopathological examination between the embolized and normal kidneys, follow-up angiogram showed atrophy of renal cortex and diminished numbers of arterial branches in the embolized kidneys. In order to identify the structural properties of microcapsules, and to determine the drug content and the rate of release, further experiment is thought to be necessary. (Author)

  18. Hepatocytes as Immunological Agents.

    Science.gov (United States)

    Crispe, Ian N

    2016-01-01

    Hepatocytes are targeted for infection by a number of major human pathogens, including hepatitis B virus, hepatitis C virus, and malaria. However, hepatocytes are also immunological agents in their own right. In systemic immunity, they are central in the acute-phase response, which floods the circulation with defensive proteins during diverse stresses, including ischemia, physical trauma, and sepsis. Hepatocytes express a variety of innate immune receptors and, when challenged with pathogen- or damage-associated molecular patterns, can deliver cell-autonomous innate immune responses that may result in host defense or in immunopathology. Important human pathogens have evolved mechanisms to subvert these responses. Finally, hepatocytes talk directly to T cells, resulting in a bias toward immune tolerance. PMID:26685314

  19. UTBot: A Virtual Agent Platform for Teaching Agent System Design

    Directory of Open Access Journals (Sweden)

    In-Cheol Kim

    2007-02-01

    Full Text Available We introduce UTBot, a virtual agent platform for teaching agent system design. UTBot implements a client for the Unreal Tournament game server and Gamebots system. It provides students with the basic functionality required to start developing their own intelligent virtual agents to play autonomously UT games. UTBot includes a generic agent architecture, CAA (Context-sensitive Agent Architecture, a domain-specific world model, a visualization tool, several basic strategies (represented by internal modes and internal behaviors, and skills (represented by external behaviors. The CAA architecture can support complex long-term behaviors as well as reactive short-term behaviors. It also realizes high context-sensitivity of behaviors. We also discuss our experience using UTBot as a pedagogical tool for teaching agent system design in undergraduate Artificial Intelligence course.

  20. Clean Energy Policy Analyses: Analysis of the Status and Impact of Clean Energy Policies at the Local Level

    Energy Technology Data Exchange (ETDEWEB)

    Busche, S.

    2010-12-01

    This report takes a broad look at the status of local clean energy policies in the United States to develop a better understanding of local clean energy policy development and the interaction between state and local policies. To date, the majority of clean energy policy research focuses on the state and federal levels. While there has been a substantial amount of research on local level climate change initiatives, this is one of the first analyses of clean energy policies separate from climate change initiatives. This report is one in a suite of reports analyzing clean energy and climate policy development at the local, state, and regional levels.