Dynamic ad hoc networks

CERN Document Server

Rashvand, Habib

2013-01-01

Motivated by the exciting new application paradigm of using amalgamated technologies of the Internet and wireless, the next generation communication networks (also called 'ubiquitous', 'complex' and 'unstructured' networking) are changing the way we develop and apply our future systems and services at home and on local, national and global scales. Whatever the interconnection - a WiMAX enabled networked mobile vehicle, MEMS or nanotechnology enabled distributed sensor systems, Vehicular Ad hoc Networking (VANET) or Mobile Ad hoc Networking (MANET) - all can be classified under new networking s

Design of a bimorph piezoelectric energy harvester for railway monitoring

Energy Technology Data Exchange (ETDEWEB)

Li, Jingcheng; Jang, Shinae; Tang, Jiong [Univ. of Connecticut, Connecticut (United States)

2012-12-15

Wireless sensor network is one of prospective methods for railway monitoring due to the long term operation and low maintenance performances. How to supply power to the wireless sensor nodes has drawn much attention recently. In railway monitoring, the idea of converting ambient vibration energy from vibration of railway track induced by passing trains to electric energy has made it a potential way for powering the wireless sensor nodes. In this paper, a bimorph cantilever piezoelectric energy harvester was designed based on a single degree of freedom model. Experimental test was also performed to validate the design. The first natural frequency of the bimorph piezoelectric energy harvester was decreased from 117.1 Hz to 65.2 Hz by adding 4 gram tip mass to the free end of the 8.6 gram energy harvester. In addition, the power generation of the piezoelectric energy harvester with 4 gram tip mass at resonant frequency was increased from 0.14 mW to 0.74 mW from 2.06 m/s{sup 2} base excitation compared to stand alone piezoelectric energy harvester without tip mass.

Design of a bimorph piezoelectric energy harvester for railway monitoring

International Nuclear Information System (INIS)

Li, Jingcheng; Jang, Shinae; Tang, Jiong

2012-01-01

Wireless sensor network is one of prospective methods for railway monitoring due to the long term operation and low maintenance performances. How to supply power to the wireless sensor nodes has drawn much attention recently. In railway monitoring, the idea of converting ambient vibration energy from vibration of railway track induced by passing trains to electric energy has made it a potential way for powering the wireless sensor nodes. In this paper, a bimorph cantilever piezoelectric energy harvester was designed based on a single degree of freedom model. Experimental test was also performed to validate the design. The first natural frequency of the bimorph piezoelectric energy harvester was decreased from 117.1 Hz to 65.2 Hz by adding 4 gram tip mass to the free end of the 8.6 gram energy harvester. In addition, the power generation of the piezoelectric energy harvester with 4 gram tip mass at resonant frequency was increased from 0.14 mW to 0.74 mW from 2.06 m/s 2 base excitation compared to stand alone piezoelectric energy harvester without tip mass

Performance of a piezoelectric energy harvester in actual rain

International Nuclear Information System (INIS)

Wong, Voon-Kean; Ho, Jee-Hou; Chai, Ai-Bao

2017-01-01

When raindrops impact on the surface of a piezoelectric beam, strain energy produced by the impinging raindrop will be converted to harvestable electrical energy by the piezoelectric layers in a cantilever beam. The novelty of this study is to investigate the performance of the harvester in actual rain and provide practical insights on implementation. The influences of rain parameters such as rain rate, rainfall depth, raindrop count, and drop size distribution (DSD) are discussed in this study. The raindrops accumulated on the surface of the piezoelectric beam will form a water layer. It is described using added mass coefficient in this study. In an actual rain experiment, a piezoelectric beam with surface area of 0.0018 m 2 is able to produce 2076 μJ of energy over a duration of 301 min. The energy generation of a raindrop impact piezoelectric energy harvester is highly dependent on the rain rate. Due to the inconsistency of the energy generation, the piezoelectric energy harvester would require an integration of suitable energy storage device for continuous operation. Nevertheless, this work shows the feasibility of harvesting raindrop energy using a piezoelectric beam. - Highlights: • The performance of a piezoelectric rain energy harvester is tested in actual rain. • The energy generation is highly dependent on the rain rate. • Practical insights on the implementation of the harvester are discussed. • A total energy of 2076 μJ is generated over a duration of 301 min.

Harvesting of Dunaliella salina by membrane filtration at pilot scale

KAUST Repository

Monte, Joana

2017-09-02

The microalgae Dunaliella salina is industrially produced due to its high content in carotenoids induced by low nitrogen and high salinity conditions. D. salina with low carotenoids content also produces other added value compounds, however its recovery have hardly been studied. This work aims to examine the potential of pre-concentrating D. salina by membrane processing prior to a final harvesting step by low-shear centrifugation. The aim is to minimize the overall energy expenditure and reduce capital costs, while assuring a minimal loss of cell integrity. This task is challenging, considering the sensitivity of D. salina to shear. Harvesting of D. salina by ultrafiltration allowed reaching a final concentration factor of 5.9, with an average permeate flux of 31 L/(m2 h). The Total Cost of Ownership and energy consumption for harvesting are respectively 52% and 45% lower when applying a two-step approach with pre-concentration (ultrafiltration) compared to only harvesting by centrifugation.

Harvesting of Dunaliella salina by membrane filtration at pilot scale

KAUST Repository

Monte, Joana; Sá , Marta; Galinha, Clá udia F.; Costa, Luí s; Hoekstra, Herre; Brazinha, Carla; Crespo, Joã o G.

2017-01-01

The microalgae Dunaliella salina is industrially produced due to its high content in carotenoids induced by low nitrogen and high salinity conditions. D. salina with low carotenoids content also produces other added value compounds, however its recovery have hardly been studied. This work aims to examine the potential of pre-concentrating D. salina by membrane processing prior to a final harvesting step by low-shear centrifugation. The aim is to minimize the overall energy expenditure and reduce capital costs, while assuring a minimal loss of cell integrity. This task is challenging, considering the sensitivity of D. salina to shear. Harvesting of D. salina by ultrafiltration allowed reaching a final concentration factor of 5.9, with an average permeate flux of 31 L/(m2 h). The Total Cost of Ownership and energy consumption for harvesting are respectively 52% and 45% lower when applying a two-step approach with pre-concentration (ultrafiltration) compared to only harvesting by centrifugation.

Categorization of ber varieties in relation to blooming period, fruit setting and harvesting time

International Nuclear Information System (INIS)

Sharif, N.; Abbas, M.M.; Ishfaq, M.; Memon, N.U.N.

2013-01-01

Thirty four local Ber varieties were evaluated at Horticultural Research Institute AARI, Faisalabad, Horticultural Research Station Bahawalpur (Punjab) and Jujube Research Station, Tandojam (Sindh). Traits viz. total period of blooming (dates), peak period of blooming (dates), total period of fruit set (dates), peak period of fruit set (dates), total period of fruit harvest (dates), peak period of fruit harvest (dates), total flowering days, peak flowering days, total fruit setting days, peak fruit setting days, total harvesting days and peak harvesting days were studied. The results revealed significant differences in parameters studied except total period of blooming under Tandojam, Sindh conditions. Varieties were classified as early, mid and late season for both provinces. Local varieties had potential for further manipulation in terms of variety improvement to attract growers for extensive ber cultivations under changing global climatic scenario. (author)

Wind energy harvesting with a piezoelectric harvester

International Nuclear Information System (INIS)

Wu, Nan; Wang, Quan; Xie, Xiangdong

2013-01-01

An energy harvester comprising a cantilever attached to piezoelectric patches and a proof mass is developed for wind energy harvesting, from a cross wind-induced vibration of the cantilever, by the electromechanical coupling effect of piezoelectric materials. The vibration of the cantilever under the cross wind is induced by the air pressure owing to a vortex shedding phenomenon that occurs on the leeward side of the cantilever. To describe the energy harvesting process, a theoretical model considering the cross wind-induced vibration on the piezoelectric coupled cantilever energy harvester is developed, to calculate the charge and the voltage from the harvester. The influences of the length and location of the piezoelectric patches as well as the proof mass on the generated electric power are investigated. Results show that the total generated electric power can be as high as 2 W when the resonant frequency of the cantilever harvester is close to the vortex shedding frequency. Moreover, a value of total generated electric power up to 1.02 W can be practically realized for a cross wind with a variable wind velocity of 9–10 m s −1 by a harvester with a length of 1.2 m. This research facilitates an effective and compact wind energy harvesting device. (paper)

STATISTICAL TOOLS FOR CLASSIFYING GALAXY GROUP DYNAMICS

International Nuclear Information System (INIS)

Hou, Annie; Parker, Laura C.; Harris, William E.; Wilman, David J.

2009-01-01

The dynamical state of galaxy groups at intermediate redshifts can provide information about the growth of structure in the universe. We examine three goodness-of-fit tests, the Anderson-Darling (A-D), Kolmogorov, and χ 2 tests, in order to determine which statistical tool is best able to distinguish between groups that are relaxed and those that are dynamically complex. We perform Monte Carlo simulations of these three tests and show that the χ 2 test is profoundly unreliable for groups with fewer than 30 members. Power studies of the Kolmogorov and A-D tests are conducted to test their robustness for various sample sizes. We then apply these tests to a sample of the second Canadian Network for Observational Cosmology Redshift Survey (CNOC2) galaxy groups and find that the A-D test is far more reliable and powerful at detecting real departures from an underlying Gaussian distribution than the more commonly used χ 2 and Kolmogorov tests. We use this statistic to classify a sample of the CNOC2 groups and find that 34 of 106 groups are inconsistent with an underlying Gaussian velocity distribution, and thus do not appear relaxed. In addition, we compute velocity dispersion profiles (VDPs) for all groups with more than 20 members and compare the overall features of the Gaussian and non-Gaussian groups, finding that the VDPs of the non-Gaussian groups are distinct from those classified as Gaussian.

Classifier-ensemble incremental-learning procedure for nuclear transient identification at different operational conditions

Energy Technology Data Exchange (ETDEWEB)

Baraldi, Piero, E-mail: piero.baraldi@polimi.i [Dipartimento di Energia - Sezione Ingegneria Nucleare, Politecnico di Milano, via Ponzio 34/3, 20133 Milano (Italy); Razavi-Far, Roozbeh [Dipartimento di Energia - Sezione Ingegneria Nucleare, Politecnico di Milano, via Ponzio 34/3, 20133 Milano (Italy); Zio, Enrico [Dipartimento di Energia - Sezione Ingegneria Nucleare, Politecnico di Milano, via Ponzio 34/3, 20133 Milano (Italy); Ecole Centrale Paris-Supelec, Paris (France)

2011-04-15

An important requirement for the practical implementation of empirical diagnostic systems is the capability of classifying transients in all plant operational conditions. The present paper proposes an approach based on an ensemble of classifiers for incrementally learning transients under different operational conditions. New classifiers are added to the ensemble where transients occurring in new operational conditions are not satisfactorily classified. The construction of the ensemble is made by bagging; the base classifier is a supervised Fuzzy C Means (FCM) classifier whose outcomes are combined by majority voting. The incremental learning procedure is applied to the identification of simulated transients in the feedwater system of a Boiling Water Reactor (BWR) under different reactor power levels.

Classifier-ensemble incremental-learning procedure for nuclear transient identification at different operational conditions

International Nuclear Information System (INIS)

Baraldi, Piero; Razavi-Far, Roozbeh; Zio, Enrico

2011-01-01

An important requirement for the practical implementation of empirical diagnostic systems is the capability of classifying transients in all plant operational conditions. The present paper proposes an approach based on an ensemble of classifiers for incrementally learning transients under different operational conditions. New classifiers are added to the ensemble where transients occurring in new operational conditions are not satisfactorily classified. The construction of the ensemble is made by bagging; the base classifier is a supervised Fuzzy C Means (FCM) classifier whose outcomes are combined by majority voting. The incremental learning procedure is applied to the identification of simulated transients in the feedwater system of a Boiling Water Reactor (BWR) under different reactor power levels.

Introducing ADS 2.0

Science.gov (United States)

Accomazzi, Alberto; Kurtz, M. J.; Henneken, E. A.; Grant, C. S.; Thompson, D.; Luker, J.; Chyla, R.; Murray, S. S.

2014-01-01

In the spring of 1993, the Smithsonian/NASA Astrophysics Data System (ADS) first launched its bibliographic search system. It was known then as the ADS Abstract Service, a component of the larger Astrophysics Data System effort which had developed an interoperable data system now seen as a precursor of the Virtual Observatory. As a result of the massive technological and sociological changes in the field of scholarly communication, the ADS is now completing the most ambitious technological upgrade in its twenty-year history. Code-named ADS 2.0, the new system features: an IT platform built on web and digital library standards; a new, extensible, industrial strength search engine; a public API with various access control capabilities; a set of applications supporting search, export, visualization, analysis; a collaborative, open source development model; and enhanced indexing of content which includes the full-text of astronomy and physics publications. The changes in the ADS platform affect all aspects of the system and its operations, including: the process through which data and metadata are harvested, curated and indexed; the interface and paradigm used for searching the database; and the follow-up analysis capabilities available to the users. This poster describes the choices behind the technical overhaul of the system, the technology stack used, and the opportunities which the upgrade is providing us with, namely gains in productivity and enhancements in our system capabilities.

Bistable energy harvesting enhancement with an auxiliary linear oscillator

Science.gov (United States)

Harne, R. L.; Thota, M.; Wang, K. W.

2013-12-01

Recent work has indicated that linear vibrational energy harvesters with an appended degree-of-freedom (DOF) may be advantageous for introducing new dynamic forms to extend the operational bandwidth. Given the additional interest in bistable harvester designs, which exhibit a propitious snap through effect from one stable state to the other, it is a logical extension to explore the influence of an added DOF to a bistable system. However, bistable snap through is not a resonant phenomenon, which tempers the presumption that the dynamics induced by an additional DOF on bistable designs would inherently be beneficial as for linear systems. This paper presents two analytical formulations to assess the fundamental and superharmonic steady-state dynamics of an excited bistable energy harvester to which is attached an auxiliary linear oscillator. From an energy harvesting perspective, the model predicts that the additional linear DOF uniformly amplifies the bistable harvester response magnitude and generated power for excitation frequencies less than the attachment’s resonance while improved power density spans a bandwidth below this frequency. Analyses predict bandwidths having co-existent responses composed of a unique proportion of fundamental and superharmonic dynamics. Experiments validate key analytical predictions and observe the ability for the coupled system to develop an advantageous multi-harmonic interwell response when the initial conditions are insufficient for continuous high-energy orbit at the excitation frequency. Overall, the addition of an auxiliary linear oscillator to a bistable harvester is found to be an effective means of enhancing the energy harvesting performance and robustness.

Classification of methods for annual energy harvesting calculations of photovoltaic generators

International Nuclear Information System (INIS)

Rus-Casas, C.; Aguilar, J.D.; Rodrigo, P.; Almonacid, F.; Pérez-Higueras, P.J.

2014-01-01

Highlights: • The paper presents a novel classification of methods for annual energy harvesting calculation of grid-connected PV systems. • The methods are classified in direct and indirect methods. • Direct methods directly calculate the energy. Indirect methods calculate the energy from the power. • The classification can help the PV professionals in order to choose the most suitable method for each application. - Abstract: Estimating the energy provided by the generators of grid-connected photovoltaic systems is important in order to analyze their economic viability and supervise their operation. The energy harvesting calculation of a photovoltaic generator is not trivial; there are a lot of methods for this calculation. The aim of this paper is to develop a novel classification of methods for annual energy harvesting calculation of a generator of a grid-connected photovoltaic system. The methods are classified in two groups: (1) those that indirectly calculate the energy, i.e. they first calculate the power and from this, they calculate the energy, and (2) those that directly calculate the energy. Furthermore, the indirect methods are grouped in two categories: those that first calculate the I–V curve of the generator and from this, they calculate the power, and those that directly calculate the power. The study has shown that the existing methods differ in simplicity and accuracy, so that the proposed classification is useful in order to choose the most suitable method for each specific application

Improving the energy balance of grass-based anaerobic digestion through harvesting optimization

DEFF Research Database (Denmark)

Tsapekos, Panagiotis; Kougias, Panagiotis; Egelund, H.

with a number of coarse barbs) to simultaneously mow and mechanically pretreat two different lignocellulosic substrates. Thus, ensiled meadow grass was initially examined at the first experimental set up. Regarding the second field test, an area sowed with regularly cultivated grass was harvested. In order......) protocol. The findings showed that methane production can efficiently be enhanced by mechanical pretreatment applied at the harvesting step. More specifically, the most effective treatment yielded more than 10% increase in the bioenergy production from both examined grass silages. Our study demonstrates...... that the appropriate harvester can improve the energy output by approximately 2.4 GJ/ha under optimal conditions and subsequently, the overall sustainability of grass-based AD....

Modified methylene blue injection improves lymph node harvest in rectal cancer.

Science.gov (United States)

Liu, Jianpei; Huang, Pinjie; Zheng, Zongheng; Chen, Tufeng; Wei, Hongbo

2017-04-01

The presence of nodal metastases in rectal cancer plays an important role in accurate staging and prognosis, which depends on adequate lymph node harvest. The aim of this prospective study is to investigate the feasibility and survival benefit of improving lymph node harvest by a modified method with methylene blue injection in rectal cancer specimens. One hundred and thirty-one patients with rectal cancer were randomly assigned to the control group in which lymph nodes were harvested by palpation and sight, or to the methylene blue group using a modified method of injection into the superior rectal artery with methylene blue. Analysis of clinicopathologic records, including a long-term follow-up, was performed. In the methylene blue group, 678 lymph nodes were harvested by simple palpation and sight. Methylene blue injection added 853 lymph nodes to the total harvest as well as 32 additional metastatic lymph nodes, causing a shift to node-positive stage in four patients. The average number of lymph nodes harvested was 11.7 ± 3.4 in the control group and 23.2 ± 4.7 in the methylene blue group, respectively. The harvest of small lymph nodes (rectal cancer, especially small node and metastatic node retrieval, which provided more accurate staging. However, it was not associated with overall survival. © 2014 Royal Australasian College of Surgeons.

The wood industry in Atlantic Canada: A focus on value-added

International Nuclear Information System (INIS)

1998-11-01

This report prepared by the Atlantic Canada Opportunities Agency in consultation with the four Atlantic provinces focuses on the value-added aspects of the wood products industry in Atlantic Canada. It also examines the state of the resource, the state of the industry, productivity and economic benefits, products and markets, trade and regulations, and needs, challenges and targets. The analysis was undertaken to determine the possibility of further utilization of forest resources in the region for value-added products, and to assess the possibilities for the wood products industry of Atlantic Canada exploring world markets for its products. The inventory of resources found 1.4 billion cubic meter of wood-growing productive forest land in the region, with softwoods accounting for 76 per cent of the forests. Concern was expressed about forest stands at regeneration levels. Total Annual Allowable Cut (AAC) for the Atlantic Provinces in 1995 was almost 20 million cubic meter, approximately 10 per cent of the national total. Although total harvests are below the AAC for the region, softwood harvesting in 1994 and in 1995 was well above the AAC. The analysis concluded that given the current level of harvesting, sustained growth in Atlantic Canada's wood industries will have to rely on access to external fibre sources and better use of the existing fibre source. At the same time, since many value-added manufacturers in the region rely on imported wood resources, the health of the value-added wood industry does not appear to be completely dependent on the sustainability of forest resources in the Atlantic region. Part Two of the report provides an economic profile of the industry, including brief reviews on employment, wages and salaries, exports and imports, transportation, education and training, research and technology and marketing. refs., tabs

Harvest Regulations and Implementation Uncertainty in Small Game Harvest Management

Directory of Open Access Journals (Sweden)

Pål F. Moa

2017-09-01

Full Text Available A main challenge in harvest management is to set policies that maximize the probability that management goals are met. While the management cycle includes multiple sources of uncertainty, only some of these has received considerable attention. Currently, there is a large gap in our knowledge about implemention of harvest regulations, and to which extent indirect control methods such as harvest regulations are actually able to regulate harvest in accordance with intended management objectives. In this perspective article, we first summarize and discuss hunting regulations currently used in management of grouse species (Tetraonidae in Europe and North America. Management models suggested for grouse are most often based on proportional harvest or threshold harvest principles. These models are all built on theoretical principles for sustainable harvesting, and provide in the end an estimate on a total allowable catch. However, implementation uncertainty is rarely examined in empirical or theoretical harvest studies, and few general findings have been reported. Nevertheless, circumstantial evidence suggest that many of the most popular regulations are acting depensatory so that harvest bag sizes is more limited in years (or areas where game density is high, contrary to general recommendations. A better understanding of the implementation uncertainty related to harvest regulations is crucial in order to establish sustainable management systems. We suggest that scenario tools like Management System Evaluation (MSE should be more frequently used to examine robustness of currently applied harvest regulations to such implementation uncertainty until more empirical evidence is available.

On the experimental determination of the efficiency of piezoelectric impact-type energy harvesters using a rotational flywheel

International Nuclear Information System (INIS)

Janphuang, P; Lockhart, R; Briand, D; De Rooij, N F; Henein, S

2013-01-01

This paper demonstrates a novel methodology using a rotational flywheel to determine the energy conversion efficiency of the impact based piezoelectric energy harvesters. The influence of the impact speed and additional proof mass on the efficiency is presented here. In order to convert low frequency mechanical oscillations into usable electrical energy, a piezoelectric harvester is coupled to a rotating gear wheel driven by flywheel. The efficiency is determined from the ratio of the electrical energy generated by the harvester to the mechanical energy dissipated by the flywheel. The experimental results reveal that free vibrations of the harvester after plucking contribute significantly to the efficiency. The efficiency and output energy can be greatly improved by adding a proof mass to the harvester. Under certain conditions, the piezoelectric harvesters have an impact energy conversion efficiency of 1.2%

Parametric study on a collocated PZT beam vibration absorber and power harvester

Energy Technology Data Exchange (ETDEWEB)

Huang, Shyh Chin [Mechanical Engineering, Ming Chi University of Technology, New Taipei (China); Tsai, Chao Yang [Mechanical Engineering Army Academy, R.O.C., Taoyuan (China); Liao, Hsiao Hui [LNG Construction and Project Division, CPC Corp., Taipei (China)

2016-11-15

The parametric effects of a PZT beam that is simultaneously used as a vibration absorber and a power harvester were investigated in this study. A cantilever beam paved with PZT layers and with added tip mass has been widely used as a harvester or sometimes as a Dynamic vibration absorber (DVA). However, the beam is rarely considered a collocated device. In this study, the first step was theoretical derivation of a distributed beam covered with bimorph PZT layers. Then, the beam was attached to a 1DOF vibratory main system. Two indicators for vibration absorption and power harvesting were defined. Numerical results demonstrated that the lumped mass ratio favored both of the abilities, but that the DVA mass ratio influenced these two abilities in exactly the opposite way. The conjunction of a harvester circuit into a DVA shifted its resonance frequency up to 5 % (an extreme case of open circuit R→∞). Simultaneous power harvesting diminished the absorption capability up to 35 % for each set of mass ratios. To achieve the maximum degree of power harvesting, a corresponding load resistance that somewhat increases with the lumped mass ratio is applied. Experimental results verified the existence of the best load resistance, but the measured harvested curve was lower than the theoretical calculation because of structure damping and deviations of PZT material properties.

Parametric study on a collocated PZT beam vibration absorber and power harvester

International Nuclear Information System (INIS)

Huang, Shyh Chin; Tsai, Chao Yang; Liao, Hsiao Hui

2016-01-01

The parametric effects of a PZT beam that is simultaneously used as a vibration absorber and a power harvester were investigated in this study. A cantilever beam paved with PZT layers and with added tip mass has been widely used as a harvester or sometimes as a Dynamic vibration absorber (DVA). However, the beam is rarely considered a collocated device. In this study, the first step was theoretical derivation of a distributed beam covered with bimorph PZT layers. Then, the beam was attached to a 1DOF vibratory main system. Two indicators for vibration absorption and power harvesting were defined. Numerical results demonstrated that the lumped mass ratio favored both of the abilities, but that the DVA mass ratio influenced these two abilities in exactly the opposite way. The conjunction of a harvester circuit into a DVA shifted its resonance frequency up to 5 % (an extreme case of open circuit R→∞). Simultaneous power harvesting diminished the absorption capability up to 35 % for each set of mass ratios. To achieve the maximum degree of power harvesting, a corresponding load resistance that somewhat increases with the lumped mass ratio is applied. Experimental results verified the existence of the best load resistance, but the measured harvested curve was lower than the theoretical calculation because of structure damping and deviations of PZT material properties

Sustainability of Mangrove Harvesting: How do Harvesters' Perceptions Differ from Ecological Analysis?

Directory of Open Access Journals (Sweden)

Laura López-Hoffman

2006-12-01

Full Text Available To harvest biological resources sustainably, it is first necessary to understand what "sustainability" means in an ecological context, and what it means to the people who use the resources. As a case study, we examined the extractive logging of the mangrove Rhizophora mangle in the Río Limón area of Lake Maracaibo, in western Venezuela. The ecological definition of sustainable harvesting is harvesting that allows population numbers to be maintained or to increase over time. In interviews, the harvesters defined sustainable harvesting as levels permitting the maintenance of the mangrove population over two human generations, about 50 yr. In Río Limón, harvesters extract a combination of small adult and juvenile trees. Harvesting rates ranged from 7-35% of small adult trees. These harvesting levels would be sustainable according to the harvester's definition as long as juvenile harvesting was less than 40%. However, some harvesting levels that would be sustainable according to the harvesters were ecologically unsustainable, i.e., eventually causing declines in mangrove population numbers. It was also determined that the structure of mangrove forests was significantly affected by harvesting; even areas harvested at low, ecologically sustainable intensities had significantly fewer adult trees than undisturbed sites. Western Venezuela has no organized timber industry, so mangrove logs are used in many types of construction. A lagging economy and a lack of alternative construction materials make mangrove harvesting inevitable, and for local people, an economic necessity. This creates a trade-off between preserving the ecological characteristics of the mangrove population and responding to human needs. In order to resolve this situation, we recommended a limited and adaptive mangrove harvesting regime. We also suggest that harvesters could participate in community-based management programs as harvesting monitors.

Coherence between harvest and habitat management -- Joint venture perspectives

Science.gov (United States)

Baxter, C.K.; Nelson, J.W.; Reinecke, K.J.; Stephens, S.E.

2006-01-01

Introduction: In recent months, an ad hoc group of waterfowl scientists, representing the International Association of Fish and Wildlife Agencies (IAFWA) Adaptive Harvest Management (ARM) Task Force and the North American Waterfowl Management Plan (NAWMP) Committee, have collaborated as a Joint Task Group (JTG) to assess options for unifying the population goals guiding waterfowl harvest management and habitat management. The JTG has been charged with bringing coherence to the population goals of the two programs. Characterizing the problem as one of coherence indicates value judgments exist regarding its significance or perhaps existence. For purposes of this paper, we characterize the lack of coherence as the absence of consistent population goals in the two related components of waterfowl conservation habitat and harvest management. Our purpose is to support continued dialogue on the respective goals of these programs and the possible implications of discordant goals to habitat joint ventures. Our objectives are two-fold: (1) illustrate how NAWMP habitat management goals and strategies have been interpreted and pursued in both breeding and wintering areas, and (2) provide perspectives on the linkages between regional habitat management programs and harvest management. The Lower Mississippi Valley and the Prairie Pothole joint ventures (LMVJV and PPJV, respectively) will be used as examples.

Multifrequency Piezoelectric Energy Harvester Based on Polygon-Shaped Cantilever Array

Directory of Open Access Journals (Sweden)

Dalius Mažeika

2018-01-01

Full Text Available This paper focuses on numerical and experimental investigations of a novel design piezoelectric energy harvester. Investigated harvester is based on polygon-shaped cantilever array and employs multifrequency operating principle. It consists of eight cantilevers with irregular design of cross-sectional area. Cantilevers are connected to each other by specific angle to form polygon-shaped structure. Moreover, seven seismic masses with additional lever arms are added in order to create additional rotation moment. Numerical investigation showed that piezoelectric polygon-shaped energy harvester has five natural frequencies in the frequency range from 10 Hz to 240 Hz, where the first and the second bending modes of the cantilevers are dominating. Maximum output voltage density and energy density equal to 50.03 mV/mm3 and 604 μJ/mm3, respectively, were obtained during numerical simulation. Prototype of piezoelectric harvester was made and experimental investigation was performed. Experimental measurements of the electrical characteristics showed that maximum output voltage density, energy density, and output power are 37.5 mV/mm3, 815.16 μJ/mm3, and 65.24 μW, respectively.

Case base classification on digital mammograms: improving the performance of case base classifier

Science.gov (United States)

Raman, Valliappan; Then, H. H.; Sumari, Putra; Venkatesa Mohan, N.

2011-10-01

Breast cancer continues to be a significant public health problem in the world. Early detection is the key for improving breast cancer prognosis. The aim of the research presented here is in twofold. First stage of research involves machine learning techniques, which segments and extracts features from the mass of digital mammograms. Second level is on problem solving approach which includes classification of mass by performance based case base classifier. In this paper we build a case-based Classifier in order to diagnose mammographic images. We explain different methods and behaviors that have been added to the classifier to improve the performance of the classifier. Currently the initial Performance base Classifier with Bagging is proposed in the paper and it's been implemented and it shows an improvement in specificity and sensitivity.

Designing A General Deep Web Harvester by Harvestability Factor

NARCIS (Netherlands)

Khelghati, Mohammadreza; van Keulen, Maurice; Hiemstra, Djoerd

2014-01-01

To make deep web data accessible, harvesters have a crucial role. Targeting different domains and websites enhances the need of a general-purpose harvester which can be applied to different settings and situations. To develop such a harvester, a large number of issues should be addressed. To have

Redistribution of soil nitrogen, carbon and organic matter by mechanical disturbance during whole-tree harvesting in northern hardwoods

Science.gov (United States)

Ryan, D.F.; Huntington, T.G.; Wayne, Martin C.

1992-01-01

To investigate whether mechanical mixing during harvesting could account for losses observed from forest floor, we measured surface disturbance on a 22 ha watershed that was whole-tree harvested. Surface soil on each 10 cm interval along 81, randomly placed transects was classified immediately after harvesting as mineral or organic, and as undisturbed, depressed, rutted, mounded, scarified, or scalped (forest floor scraped away). We quantitatively sampled these surface categories to collect soil in which preharvest forest floor might reside after harvest. Mechanically mixed mineral and organic soil horizons were readily identified. Buried forest floor under mixed mineral soil occurred in 57% of mounds with mineral surface soil. Harvesting disturbed 65% of the watershed surface and removed forest floor from 25% of the area. Mechanically mixed soil under ruts with organic or mineral surface soil, and mounds with mineral surface soil contained organic carbon and nitrogen pools significantly greater than undisturbed forest floor. Mechanical mixing into underlying mineral soil could account for the loss of forest floor observed between the preharvest condition and the second growing season after whole-tree harvesting. ?? 1992.

The Effect of Overweight Status on Total and Metastatic Number of Harvested Lymph Nodes During Colorectal Surgery

Directory of Open Access Journals (Sweden)

Sezgin Zeren

2016-03-01

Full Text Available Objective: The aim of this study is to evaluate the rela­tionship between higher body mass index (BMI and har­vested total or metastatic lymph node numbers in patients who underwent surgery for colorectal cancers. Methods: Between March 2014 and January 2016, totally 71patients who underwent laparoscopic or conventional surgery for colorectal cancer were evaluated retrospec­tively. The data of age, gender, BMI, surgical procedure, tumor localization , postoperative mortality status, total number of harvested and metastatic lymph node were collected. The patients having 24.9 (kg/m2 or lower BMI values were classified as normal (Group 1 and patients having BMI values of 25 or over were overweight (Group 2. Afterwards, the parameters between groups and the effect of higher BMI were analyzed. Results: The mean age of the patients was 64.5 ± 14 years. The average BMI value in group 1 was 22.3 (kg/m2 and 27.0 (kg/m2 in group 2. According to localisation of tumor, transverse colon was the rare region for both groups. The common regions for tumor localisation in group 1 were right colon, sigmoid colon and rectum. In group 2 the common localisation for tumors were rectum, right colon and sigmoid colon. There was no difference between groups about postoperative mortality rates (p > 0.05. The mean of the total number of harvested lymph nodes were 14 in group 1 and 12 in group 2. There were no relationship between BMI and tumor diameter, total or metastatic number of harvested lymph nodes. Conclusion: Higher BMI values does not effect the num­ber of excised total or metastatic lymph nodes and tumor diameters. Therefore, the surgeons should not hesitate in overweight patients cancer surgery for dissecting ad­equate number of lymph nodes.

Improving light harvesting in polymer photodetector devices through nanoindented metal mask films

NARCIS (Netherlands)

Macedo, A. G.; Zanetti, F.; Mikowski, A.; Hummelen, J. C.; Lepienski, C. M.; da Luz, M. G. E.; Roman, L. S.

2008-01-01

To enhance light harvesting in organic photovoltaic devices, we propose the incorporation of a metal (aluminum) mask film in the system's usual layout. We fabricate devices in a sandwich geometry, where the mask (nanoindented with a periodic array of holes of sizes d and spacing s) is added between

移动Ad Hoc网络路由协议综述%A Survey of Routing Protocols for Mobile Ad Hoc Networks

Institute of Scientific and Technical Information of China (English)

张顺亮; 叶澄清; 李方敏

2003-01-01

A review of current research about routing protocols for mobile Ad Hoc networks is made. Based on classifying of them, the characteristic, the strength and the weakness of these protocols are evaluated respectively. Then some crucial strategies to improve the existing routing protocols are proposed. Besides, a frame of new routing protocol for Ad Hoc networks is put forward. Finally, open issues that still need investigation are listed.

Laser scanning measurements on trees for logging harvesting operations.

Science.gov (United States)

Zheng, Yili; Liu, Jinhao; Wang, Dian; Yang, Ruixi

2012-01-01

Logging harvesters represent a set of high-performance modern forestry machinery, which can finish a series of continuous operations such as felling, delimbing, peeling, bucking and so forth with human intervention. It is found by experiment that during the process of the alignment of the harvesting head to capture the trunk, the operator needs a lot of observation, judgment and repeated operations, which lead to the time and fuel losses. In order to improve the operation efficiency and reduce the operating costs, the point clouds for standing trees are collected with a low-cost 2D laser scanner. A cluster extracting algorithm and filtering algorithm are used to classify each trunk from the point cloud. On the assumption that every cross section of the target trunk is approximate a standard circle and combining the information of an Attitude and Heading Reference System, the radii and center locations of the trunks in the scanning range are calculated by the Fletcher-Reeves conjugate gradient algorithm. The method is validated through experiments in an aspen forest, and the optimized calculation time consumption is compared with the previous work of other researchers. Moreover, the implementation of the calculation result for automotive capturing trunks by the harvesting head during the logging operation is discussed in particular.

Energy harvesting from high-rise buildings by a piezoelectric harvester device

International Nuclear Information System (INIS)

Xie, X.D.; Wang, Q.; Wang, S.J.

2015-01-01

A novel piezoelectric technology of harvesting energy from high-rise buildings is developed. While being used to harness vibration energy of a building, the technology is also helpful to dissipate vibration of the building by the designed piezoelectric harvester as a tuned mass damper. The piezoelectric harvester device is made of two groups of series piezoelectric generators connected by a shared shaft. The shaft is driven by a linking rod hinged on a proof mass on the tip of a cantilever fixed on the roof of the building. The influences of some practical considerations, such as the mass ratio of the proof mass to the main structure, the ratios of the length and flexural rigidity of the cantilever to those of the main structure, on the root mean square (RMS) of the generated electric power and the energy harvesting efficiency of the piezoelectric harvester device are discussed. The research provides a new method for an efficient and practical energy harvesting from high-rise buildings by piezoelectric harvesters. - Highlights: • A new piezoelectric technology in energy harvesting from high-rise buildings is introduced. • A new mathematics model to calculate the energy harvested by the piezoelectric device is developed. • A novel efficient design of the piezoelectric harvester device in provided. • An electric power up to 432 MW under a seismic excitation at a frequency of 30 rad/s is achieved.

A coupled piezoelectric–electromagnetic energy harvesting technique for achieving increased power output through damping matching

International Nuclear Information System (INIS)

Challa, Vinod R; Prasad, M G; Fisher, Frank T

2009-01-01

Vibration energy harvesting is being pursued as a means to power wireless sensors and ultra-low power autonomous devices. From a design standpoint, matching the electrical damping induced by the energy harvesting mechanism to the mechanical damping in the system is necessary for maximum efficiency. In this work two independent energy harvesting techniques are coupled to provide higher electrical damping within the system. Here the coupled energy harvesting device consists of a primary piezoelectric energy harvesting device to which an electromagnetic component is added to better match the total electrical damping to the mechanical damping in the system. The first coupled device has a resonance frequency of 21.6 Hz and generates a peak power output of ∼332 µW, compared to 257 and 244 µW obtained from the optimized, stand-alone piezoelectric and electromagnetic energy harvesting devices, respectively, resulting in a 30% increase in power output. A theoretical model has been developed which closely agrees with the experimental results. A second coupled device, which utilizes the d 33 piezoelectric mode, shows a 65% increase in power output in comparison to the corresponding stand-alone, single harvesting mode devices. This work illustrates the design considerations and limitations that one must consider to enhance device performance through the coupling of multiple harvesting mechanisms within a single energy harvesting device

Predicting Output Power for Nearshore Wave Energy Harvesting

Directory of Open Access Journals (Sweden)

Henock Mamo Deberneh

2018-04-01

Full Text Available Energy harvested from a Wave Energy Converter (WEC varies greatly with the location of its installation. Determining an optimal location that can result in maximum output power is therefore critical. In this paper, we present a novel approach to predicting the output power of a nearshore WEC by characterizing ocean waves using floating buoys. We monitored the movement of the buoys using an Arduino-based data collection module, including a gyro-accelerometer sensor and a wireless transceiver. The collected data were utilized to train and test prediction models. The models were developed using machine learning algorithms: SVM, RF and ANN. The results of the experiments showed that measurements from the data collection module can yield a reliable predictor of output power. Furthermore, we found that the predictors work better when the regressors are combined with a classifier. The accuracy of the proposed prediction model suggests that it could be extremely useful in both locating optimal placement for wave energy harvesting plants and designing the shape of the buoys used by them.

Live growth performance, carcass grading characteristics, and harvest yields of beef steers supplemented zilpaterol hydrochloride and offered ad libitum or maintenance energy intake.

Science.gov (United States)

Judy Walter, Lee-Anne; Schmitz, Angela Nicole; Nichols, Wade Taylor; Hutcheson, John Paul; Lawrence, Ty Ellis

2018-05-04

A trial was conducted to examine live growth efficiency, harvest yields, and carcass grading performance of steers fed at maintenance (M) or at ad libitum (A) level of intake during zilpaterol hydrochloride (Z) supplementation. Single-sired, beef steers (n = 56; start of trial BW 590 ± 36 kg) blocked (n = 2) by weight and terminal implant were sorted into pairs (n = 14 per block) by weight. Pairs of steers were initially assigned to 0, 28, or 56 d of feeding. Within 28 or 56 d, pairs were assigned to M or A intake. Steers within a pair assigned to 56 d of feeding were randomly assigned to either 20 d of Z supplementation (90 mg/d per steer) with a 4 d withdrawal period prior to slaughter or to no ZH supplementation (C). Steers were housed and fed in individual pens. Weights of all non-carcass and carcass components were recorded at slaughter; carcasses were graded 24-h postmortem. Data were analyzed via a mixed model; the fixed effect was treatment combination with random effects of block and pair. Live growth data used harvest day as the repeated measure and animal as the subject. Single df contrasts were constructed for day 0 vs. day 28, day 0 vs. day 56, day 28 vs. day 56, M vs. A, and C vs. Z. Treatment impacted (P ≤ 0.05) live ADG; contrasts indicated A (1.33) was greater than M (0.14 kg), and Z (1.12) was greater than C (0.82 kg). Similarly, carcass ADG differences (P carcass and internal cavity mass (P carcass yield was greater (P carcass growth, carcass transfer, kill yields, and carcass characteristics across time.

Site quality influence over understory plant diversity in old-growth and harvested Nothofagus pumilio forests

Directory of Open Access Journals (Sweden)

E. A. Gallo

2013-04-01

Full Text Available Aim of study: The effects and interactions of shelterwood forest harvesting and site qualities over understory plant species diversity and composition were compared among primary and harvested Nothofagus pumilio forests.Area of study: Tierra del Fuego (Argentina, on three pure conditions (one and six year-old harvested, and primary without previous harvesting forests and three site qualities (high, medium and low.Material and Methods: Understory richness and cover (% were registered in five replicates of 1 hectare each per treatment. Taxonomic species were classified in categories (groups, origin and life forms. Two-way ANOVAs and multivariate analyses were conducted.Main results: Shelterwood harvesting and site quality significantly influenced understory cover and richness, which allow the introduction of native and exotic species and increasing of dicot and monocot covers. In dicots, monocots, exotics and total groups, higher richness and covers were related to time. Meanwhile, cover reached similar high values in all site qualities on dicot, native and total groups. On the other hand, monocot and exotic richness and cover remain similar in primary and recently harvested forests, and greatly increased in old harvested forests. Mosses and ferns were among the most sensitive groups.Research highlights: Impacts of shelterwood cut depend on site quality of the stands and time since harvesting occurs. For this, different site quality stands should received differential attention in the development of conservation strategies, as well as variations in the shelterwood implementation (as irregularity and patchiness should be considered to better promote understory plant species conservation inside managed areas.Key words: plant species conservation; years after harvesting; forest management; Tierra del Fuego.

Intrinsic atopic dermatitis (AD) shows similar Th2 and higher Th17 immune activation compared to extrinsic AD

Science.gov (United States)

Suárez-Fariñas, M; Dhingra, N; Gittler, J; Shemer, A; Cardinale, I; de Guzman Strong, C; Krueger, JG; Guttman-Yassky, E

2013-01-01

Background Atopic dermatitis (AD) is classified as extrinsic (ADe) and intrinsic (ADi), representing approximately 80% and 20% of patients, respectively. While sharing a similar clinical phenotype, only ADe is characterized by high serum IgE. Since most AD patients exhibit high IgE, an “allergic”/IgE-mediated disease pathogenesis was hypothesized. However, current models associate AD with T-cell activation, particularly Th2/Th22 polarization, and epidermal barrier defects. Objective To define if both variants share a common pathogenesis. Methods We stratified 51 severe AD patients as ADe (42) and ADi (9) (with similar mean disease activity/SCORAD), and analyzed the molecular and cellular skin pathology of lesional and non-lesional ADi and ADe using gene-expression (RT-PCR) and immunohistochemistry. Results A significant correlation between IgE levels and SCORAD (r=0.76, pextrinsic and intrinsic AD variants might be treated with T-cell targeted therapeutics or agents that modify keratinocyte responses. PMID:23777851

Suitability of Water Harvesting in the Upper Blue Nile Basin, Ethiopia: A First Step towards a Mesoscale Hydrological Modeling Framework

Directory of Open Access Journals (Sweden)

Yihun T. Dile

2016-01-01

Full Text Available Extreme rainfall variability has been one of the major factors to famine and environmental degradation in Ethiopia. The potential for water harvesting in the Upper Blue Nile Basin was assessed using two GIS-based Multicriteria Evaluation methods: (1 a Boolean approach to locate suitable areas for in situ and ex situ systems and (2 a weighted overlay analysis to classify suitable areas into different water harvesting suitability levels. The sensitivity of the results was analyzed to the influence given to different constraining factors. A large part of the basin was suitable for water harvesting: the Boolean analysis showed that 36% of the basin was suitable for in situ and ex situ systems, while the weighted overlay analysis showed that 6–24% of the basin was highly suitable. Rainfall has the highest influence on suitability for water harvesting. Implementing water harvesting in nonagricultural land use types may further increase the benefit. Assessing water harvesting suitability at the larger catchment scale lays the foundation for modeling of water harvesting at mesoscale, which enables analysis of the potential and implications of upscaling of water harvesting practices for building resilience against climatic shocks. A complete water harvesting suitability study requires socioeconomic analysis and stakeholder consultation.

Classifying spaces of degenerating polarized Hodge structures

CERN Document Server

Kato, Kazuya

2009-01-01

In 1970, Phillip Griffiths envisioned that points at infinity could be added to the classifying space D of polarized Hodge structures. In this book, Kazuya Kato and Sampei Usui realize this dream by creating a logarithmic Hodge theory. They use the logarithmic structures begun by Fontaine-Illusie to revive nilpotent orbits as a logarithmic Hodge structure. The book focuses on two principal topics. First, Kato and Usui construct the fine moduli space of polarized logarithmic Hodge structures with additional structures. Even for a Hermitian symmetric domain D, the present theory is a refinem

Online classified advertising - Business needs in the US market : Case: FiareAds web platform

OpenAIRE

Tulea, Diana

2013-01-01

This Bachelor’s thesis was conducted for Fiare Oy, which offers web platforms for online classified advertising as a service. Fiare Oy intended to grow internationally, develop its US market share and possibly open an office in the US. The objective of this thesis was to shed light on the business needs in the US market and give recommendations for actions to Fiare Oy. The thesis project started on 4 October 2012 and ended on 17 September 2013. The literature consulted for this study rela...

A Self-Powered Hybrid Energy Scavenging System Utilizing RF and Vibration Based Electromagnetic Harvesters

International Nuclear Information System (INIS)

Uluşan, H; Gharehbaghi, K; Külah, H; Zorlu, Ö; Muhtaroğlu, A

2015-01-01

This study presents a novel hybrid system that combines the power generated simultaneously by a vibration-based Electromagnetic (EM) harvester and a UHF band RF harvester. The novel hybrid scavenger interface uses a power management circuit in 180 nm CMOS technology to step-up and to regulate the combined output. At the first stage of the system, the RF harvester generates positive DC output with a 7-stage threshold compensated rectifier, while the EM harvester generates negative DC output with a self-powered AC/DC negative doubler circuit. At the second stage, the generated voltages are serially added, stepped-up with an on-chip charge pump circuit, and regulated to a typical battery voltage of 3 V. Test results indicate that the hybrid operation enables generation of 9 μW at 3 V output for a wide range of input stimulations, which could not be attained with either harvesting mode by itself. Moreover the hybrid system behaves as a typical battery, and keeps the output voltage stable at 3 V up to 18 μW of output power. The presented system is the first battery-like harvester to our knowledge that generates energy from two independent sources and regulates the output to a stable DC voltage. (paper)

Post-harvest physiology

Science.gov (United States)

Weather and management constraints, as well as the intended use of the harvested forage, all influence the forage harvest system selected by the producer. Generally, maximum retention of dry matter from harvested forage crops is achieved at moistures intermediate between the standing fresh crop and ...

Harvesting energy from airflow with a michromachined piezoelectric harvester inside a Helmholtz resonator

International Nuclear Information System (INIS)

Matova, S P; Elfrink, R; Vullers, R J M; Van Schaijk, R

2011-01-01

In this paper we report an airflow energy harvester that combines a piezoelectric energy harvester with a Helmholtz resonator. The resonator converts airflow energy to air oscillations which in turn are converted into electrical energy by a piezoelectric harvester. Two Helmholtz resonators with adjustable resonance frequencies have been designed—one with a solid bottom and one with membrane on the bottom. The resonance frequencies of the resonators were matched to the complementing piezoelectric harvesters during harvesting. The aim of the presented work is a feasibility study on using packaged piezoelectric energy harvesters with Helmholtz resonators for airflow energy harvesting. The maximum energy we were able to obtain was 42.2 µW at 20 m s −1

Simultaneous harvesting of straw and chaff for energy purposes : influence on bale density, yield, field drying process and combustion characteristics

Energy Technology Data Exchange (ETDEWEB)

Lundin, G. [JTI Swedish Inst. of Agricultural and Environmental Engineering, Uppsala (Sweden); Ronnback, M. [SP Technical Research Inst. of Sweden, Boras (Sweden)

2010-07-01

The potential to increase the productivity of fuel straw harvest and transportation was examined. When harvesting straw for energy purposes, only the long fraction is currently collected. However, technological improvements have now rendered it possible to harvest chaff, thus increasing the amount of harvest residues and bale density. The purpose of this study was to determine how harvest yield, bale density, field-drying behaviour and combustion characteristics are affected by the simultaneous harvest of straw and chaff. Field experiments were conducted in 2009 for long- and short-stalked winter wheat crops. Combine harvesting was carried out with 2 different types of combine harvesters. A high-density baler was used to bale the crop residues. Mixing chaff in with the straw swath by combine harvesting gave a lower initial moisture content compared with straw only. The density and the weight of each bale were not affected by the treatments. However, the added chaff increased the total yield of crop residues by 14 per cent, indicating that about half of the biologically available chaff was harvested. Although mixing in chaff increased the ash content by 1 percentage unit, there was no considerable change in net calorific value or ash melting behaviour.

Helical Piezoelectric Energy Harvester and Its Application to Energy Harvesting Garments

Directory of Open Access Journals (Sweden)

Minsung Kim

2017-04-01

Full Text Available In this paper, we propose a helical piezoelectric energy harvester, examine its application to clothes in the form of an energy harvesting garment, and analyze its design and characteristics. The helical harvester is composed of an elastic core and a polymer piezoelectric strap twining the core. The fabricated harvester is highly elastic and can be stretched up to 158% of its initial length. Following the experiments using three different designs, the maximum output power is measured as 1.42 mW at a 3 MΩ load resistance and 1 Hz motional frequency. The proposed helical harvesters are applied at four positions of stretchable tight-fitting sportswear, namely shoulder, arm joint, knee, and hip. The maximum output voltage is measured as more than 20 V from the harvester at the knee position during intended body motions. In addition, electric power is also generated from this energy harvesting garment during daily human motions, which is about 3.9 V at the elbow, 3.1 V at the knee, and 4.4 V at the knee during push-up, walking, and squatting motions, respectively.

Harvesting of freshwater microalgae biomass by Scenedesmus sp. as bioflocculant

Science.gov (United States)

Rinanti, A.; Purwadi, R.

2018-01-01

This study is particularly expected to provide information on the diversity of microalgae as the flocculant agent that gives the highest biomass yield. Bioflocculation was done by using one of the flocculating microalgae i.e. Scenedesmus obliquus to concentrate on non-flocculating microalgae Chlorella vulgaris. The freshwater microalgae S. obliquus tested it ability to harvest other non-flocculating microalgae, increased sedimentation rate in the flocculation process and increased biomass yield. The flocculation of biomass microalgae with chemical flocculant as comparison was done by adding alum (K2SO4·Al2 (SO4)3·24H2O). The addition of alum (K2SO4·Al2 (SO4)3·24H2O) as flocculant at pH 11 and S. obliquus sp. as bioflocculant caused significant alteration of nutrition of microalgae. Overall, the essential content produced by flocculation method with addition of alum or with bioflocculation (%, mg/100 mg dry weight) are lipid 31,64; 38,69, protein 30,79; 38.50%, and chlorophyll 0.6253; 0.8420). Harvesting with bioflocculation methods conducted at the end of the cultivation period increase the amount of biomass significantly and can accelerate the settling time of biomass. Harvesting microalgae cells by bioflocculation method becomes an economically competitive harvesting method compared to alum as a chemical flocculant because of the cheaper cost of flocculant, not toxic so it does not require further water treatment after harvesting due to the use of alum as chemical flocculants.

Natural History of Postoperative Adding-On in Adolescent Idiopathic Scoliosis: What Are the Risk Factors for Progressive Adding-On?

Directory of Open Access Journals (Sweden)

Xiaodong Qin

2018-01-01

Full Text Available Purpose. To investigate the natural history of distal adding-on in adolescent idiopathic scoliosis (AIS and to identify risk factors for its progression. Methods. Sixty-one AIS patients with distal adding-on occurrence were included. We further classify distal adding-on into progressive and nonprogressive group according to its natural evolution. The first radiograph indicating initiation of adding-on (primary adding-on and the last follow-up radiograph were compared in terms of the deviation of the first vertebra below instrumentation from the CSVL and the angulation of the first disc below instrumentation. Compared to primary adding-on, progressive adding-on was defined as a further increase of deviation > 5 mm or a further increase of angulation > 5°. Risk factors associated with the progression of adding-on were analyzed. Results. Among 61 patients diagnosed with distal adding-on, 24 (39.3% were progressive and 37 (60.7% were nonprogressive. Lower Risser grade, open triradiate cartilage, and lowest instrumented vertebra (LIV proximal to Substantially Stable Vertebra (SSV were found to be significantly associated with the progressive adding-on. Besides, the distal adding-on was more likely to progress for patients with higher left shoulders than right ones after surgery. Conclusions. The risk factors for the progression of adding-on included skeletal immaturity, LIV proximal to SSV, and higher left shoulders after surgery.

Predicting invertebrate assemblage composition from harvesting pressure and environmental characteristics on tropical reef flats

Science.gov (United States)

Jimenez, H.; Dumas, P.; Ponton, D.; Ferraris, J.

2012-03-01

Invertebrates represent an essential component of coral reef ecosystems; they are ecologically important and a major resource, but their assemblages remain largely unknown, particularly on Pacific islands. Understanding their distribution and building predictive models of community composition as a function of environmental variables therefore constitutes a key issue for resource management. The goal of this study was to define and classify the main environmental factors influencing tropical invertebrate distributions in New Caledonian reef flats and to test the resulting predictive model. Invertebrate assemblages were sampled by visual counting during 2 years and 2 seasons, then coupled to different environmental conditions (habitat composition, hydrodynamics and sediment characteristics) and harvesting status (MPA vs. non-MPA and islets vs. coastal flats). Environmental conditions were described by a principal component analysis (PCA), and contributing variables were selected. Permutational analysis of variance (PERMANOVA) was used to test the effects of different factors (status, flat, year and season) on the invertebrate assemblage composition. Multivariate regression trees (MRT) were then used to hierarchically classify the effects of environmental and harvesting variables. MRT model explained at least 60% of the variation in structure of invertebrate communities. Results highlighted the influence of status (MPA vs. non-MPA) and location (islet vs. coastal flat), followed by habitat composition, organic matter content, hydrodynamics and sampling year. Predicted assemblages defined by indicator families were very different for each environment-exploitation scenario and correctly matched a calibration data matrix. Predictions from MRT including both environmental variables and harvesting pressure can be useful for management of invertebrates in coral reef environments.

A hybrid MLP-CNN classifier for very fine resolution remotely sensed image classification

Science.gov (United States)

Zhang, Ce; Pan, Xin; Li, Huapeng; Gardiner, Andy; Sargent, Isabel; Hare, Jonathon; Atkinson, Peter M.

2018-06-01

The contextual-based convolutional neural network (CNN) with deep architecture and pixel-based multilayer perceptron (MLP) with shallow structure are well-recognized neural network algorithms, representing the state-of-the-art deep learning method and the classical non-parametric machine learning approach, respectively. The two algorithms, which have very different behaviours, were integrated in a concise and effective way using a rule-based decision fusion approach for the classification of very fine spatial resolution (VFSR) remotely sensed imagery. The decision fusion rules, designed primarily based on the classification confidence of the CNN, reflect the generally complementary patterns of the individual classifiers. In consequence, the proposed ensemble classifier MLP-CNN harvests the complementary results acquired from the CNN based on deep spatial feature representation and from the MLP based on spectral discrimination. Meanwhile, limitations of the CNN due to the adoption of convolutional filters such as the uncertainty in object boundary partition and loss of useful fine spatial resolution detail were compensated. The effectiveness of the ensemble MLP-CNN classifier was tested in both urban and rural areas using aerial photography together with an additional satellite sensor dataset. The MLP-CNN classifier achieved promising performance, consistently outperforming the pixel-based MLP, spectral and textural-based MLP, and the contextual-based CNN in terms of classification accuracy. This research paves the way to effectively address the complicated problem of VFSR image classification.

Rainwater harvesting - An investigation into the potential for rainwater harvesting in Bradford

OpenAIRE

Doncaster, S.; Blanksby, J.; Shepherd, W.

2012-01-01

This report provides a brief review of rainwater harvesting and rainwater harvesting tools, which are then used in case study examples for domestic, office block and warehouse rain water harvesting scenarios. Rainwater harvesting is placed in an historical context as a source of water supply and in a modern context as being complementary to centralised water distribution networks with benefits for wider water management including flood risk treatment as well as providing environmental and eco...

Modeling and experimental verification of a fan-folded vibration energy harvester for leadless pacemakers

Science.gov (United States)

Ansari, M. H.; Karami, M. Amin

2016-03-01

This paper studies energy harvesting from heartbeat vibrations for powering leadless pacemakers. Unlike traditional pacemakers, leadless pacemakers are implanted inside the heart and the pacemaker is in direct contact with the myocardium. A leadless pacemaker is in the shape of a cylinder. Thus, in order to utilize the available 3-dimensional space for the energy harvester, we choose a fan-folded 3D energy harvester. The proposed device consists of several piezoelectric beams stacked on top of each other. The volume of the energy harvester is 1 cm3 and its dimensions are 2 cm × 0.5 cm × 1 cm. Although high natural frequency is generally a major concern with micro-scale energy harvesters, by utilizing the fan-folded geometry and adding tip mass and link mass to the configuration, we reduced the natural frequency to the desired range. This fan-folded design makes it possible to generate more than 10 μ W of power per cubic centimeter. The proposed device is compatible with Magnetic Resonance Imaging. Although the proposed device is a linear energy harvester, it is relatively insensitive to the heart rate. The natural frequencies and the mode shapes of the device are calculated analytically. The accuracy of the analytical model is verified by experimental investigations. We use a closed loop shaker system to precisely replicate heartbeat vibrations in vitro.

Bundling harvester; Nippukorjausharvesteri

Energy Technology Data Exchange (ETDEWEB)

Koponen, K [Eko-Log Oy, Kuopio (Finland)

1997-12-31

The staring point of the project was to design and construct, by taking the silvicultural point of view into account, a harvesting and processing system especially for energy-wood, containing manually driven bundling harvester, automatizing of the harvester, and automatized loading. The equipment forms an ideal method for entrepreneur`s-line harvesting. The target is to apply the system also for owner`s-line harvesting. The profitability of the system promotes the utilization of the system in both cases. The objectives of the project were: to construct a test equipment and prototypes for all the project stages, to carry out terrain and strain tests in order to examine the usability and durability, as well as the capacity of the machine, to test the applicability of the Eko-Log system in simultaneous harvesting of energy and pulp woods, and to start the marketing and manufacturing of the products. The basic problems of the construction of the bundling harvester have been solved using terrain-tests. The prototype machine has been shown to be operable. Loading of the bundles to form sufficiently economically transportable loads has been studied, and simultaneously, the branch-biomass has been tried to be utilized without loosing the profitability of transportation. The results have been promising, and will promote the profitable utilization of wood-energy

Bundling harvester; Nippukorjausharvesteri

Energy Technology Data Exchange (ETDEWEB)

Koponen, K. [Eko-Log Oy, Kuopio (Finland)

1996-12-31

The staring point of the project was to design and construct, by taking the silvicultural point of view into account, a harvesting and processing system especially for energy-wood, containing manually driven bundling harvester, automatizing of the harvester, and automatized loading. The equipment forms an ideal method for entrepreneur`s-line harvesting. The target is to apply the system also for owner`s-line harvesting. The profitability of the system promotes the utilization of the system in both cases. The objectives of the project were: to construct a test equipment and prototypes for all the project stages, to carry out terrain and strain tests in order to examine the usability and durability, as well as the capacity of the machine, to test the applicability of the Eko-Log system in simultaneous harvesting of energy and pulp woods, and to start the marketing and manufacturing of the products. The basic problems of the construction of the bundling harvester have been solved using terrain-tests. The prototype machine has been shown to be operable. Loading of the bundles to form sufficiently economically transportable loads has been studied, and simultaneously, the branch-biomass has been tried to be utilized without loosing the profitability of transportation. The results have been promising, and will promote the profitable utilization of wood-energy

What Is the Problem of Ad Hoc Hypotheses?

Science.gov (United States)

Bamford, Greg

1999-01-01

Philosophers' attempts to convincingly explicate the received view of an ad hoc hypothesis--that it accounts for only the observations it was designed to account for--have been unsuccessful. Familiar and firmer criteria for evaluating the hypotheses or modified theories so classified are characteristically available. Contains 41 references.…

Irradiation as an alternative post harvest treatment

Energy Technology Data Exchange (ETDEWEB)

Satin, M. [Agricultural Industries and Post-harvest Management Service, FAO, Rome (Italy); Loaharanu, P. [Head, Food Preservation Section, Joint FAO/ IAEA Division of Nuclear Techniques in Food and Agriculture, Wagramerstr. 5, A-1400, Vienna (Austria)

1997-12-31

This current world population has significantly added to the pressures placed upon our finite resources and our resulting ability to feed ourselves. In order to cope with current and future demands, the two established lines of action, that is, reduced population growth and expansion of agricultural production, must be supplemented with the parallel activity of reducing food losses during and after harvest. For developing countries in particular, enormous post-harvest losses result from spillage, contamination, pests and physiological deterioration during storage. Studies in these countries indicate that post-harvest losses are enormous and amount to tens of millions of tons per year valued at billions of dollars. Programs to reduce post-harvest losses, if applied properly, can result in realistic yield increases between 10 and 30%, which can be directly converted into increased consumption for humans. Post-harvest losses vary greatly and are a function of the crop variety, pest combinations in the environment, climate, the system of harvesting, storage, handling, marketing, and even the social and cultural environment. Pests are among the most criticals of these factors. Because of the disastrous potential consequences of such pests, quarantine regulations prohibit the entrance of plants or products which might hide the unwanted pest from countries where it is known to exist. Quarantine treatments are can be chemical, physical or ionizing radiation treatment. Numerous investigations on the use of ionizing radiation for the disinfestation of fresh plant materials indicate that rather low dosages will control fruit-fly problems, thus making it well suited for quarantine treatment. The effectiveness of the irradiation as a broad spectrum quarantine treatment of fresh fruits and vegetables was recognized by the several plant protection organizations around the world. Currently, some 40 countries have approved one or more irradiated food items or groups of food

Irradiation as an alternative post harvest treatment

International Nuclear Information System (INIS)

Satin, M.; Loaharanu, P.

1997-01-01

This current world population has significantly added to the pressures placed upon our finite resources and our resulting ability to feed ourselves. In order to cope with current and future demands, the two established lines of action, that is, reduced population growth and expansion of agricultural production, must be supplemented with the parallel activity of reducing food losses during and after harvest. For developing countries in particular, enormous post-harvest losses result from spillage, contamination, pests and physiological deterioration during storage. Studies in these countries indicate that post-harvest losses are enormous and amount to tens of millions of tons per year valued at billions of dollars. Programs to reduce post-harvest losses, if applied properly, can result in realistic yield increases between 10 and 30%, which can be directly converted into increased consumption for humans. Post-harvest losses vary greatly and are a function of the crop variety, pest combinations in the environment, climate, the system of harvesting, storage, handling, marketing, and even the social and cultural environment. Pests are among the most criticals of these factors. Because of the disastrous potential consequences of such pests, quarantine regulations prohibit the entrance of plants or products which might hide the unwanted pest from countries where it is known to exist. Quarantine treatments are can be chemical, physical or ionizing radiation treatment. Numerous investigations on the use of ionizing radiation for the disinfestation of fresh plant materials indicate that rather low dosages will control fruit-fly problems, thus making it well suited for quarantine treatment. The effectiveness of the irradiation as a broad spectrum quarantine treatment of fresh fruits and vegetables was recognized by the several plant protection organizations around the world. Currently, some 40 countries have approved one or more irradiated food items or groups of food

Irradiation as an alternative post harvest treatment

Energy Technology Data Exchange (ETDEWEB)

Satin, M [Agricultural Industries and Post-harvest Management Service, FAO, Rome (Italy); Loaharanu, P [Head, Food Preservation Section, Joint FAO/ IAEA Division of Nuclear Techniques in Food and Agriculture, Wagramerstr. 5, A-1400, Vienna (Austria)

1998-12-31

This current world population has significantly added to the pressures placed upon our finite resources and our resulting ability to feed ourselves. In order to cope with current and future demands, the two established lines of action, that is, reduced population growth and expansion of agricultural production, must be supplemented with the parallel activity of reducing food losses during and after harvest. For developing countries in particular, enormous post-harvest losses result from spillage, contamination, pests and physiological deterioration during storage. Studies in these countries indicate that post-harvest losses are enormous and amount to tens of millions of tons per year valued at billions of dollars. Programs to reduce post-harvest losses, if applied properly, can result in realistic yield increases between 10 and 30%, which can be directly converted into increased consumption for humans. Post-harvest losses vary greatly and are a function of the crop variety, pest combinations in the environment, climate, the system of harvesting, storage, handling, marketing, and even the social and cultural environment. Pests are among the most criticals of these factors. Because of the disastrous potential consequences of such pests, quarantine regulations prohibit the entrance of plants or products which might hide the unwanted pest from countries where it is known to exist. Quarantine treatments are can be chemical, physical or ionizing radiation treatment. Numerous investigations on the use of ionizing radiation for the disinfestation of fresh plant materials indicate that rather low dosages will control fruit-fly problems, thus making it well suited for quarantine treatment. The effectiveness of the irradiation as a broad spectrum quarantine treatment of fresh fruits and vegetables was recognized by the several plant protection organizations around the world. Currently, some 40 countries have approved one or more irradiated food items or groups of food

Harvest time and post-harvest quality of Fuyu persimmon treated before harvest with gibberellic acid and aminoetoxyvinilglycine

Directory of Open Access Journals (Sweden)

Ricardo Antonio Ayub

2008-12-01

Full Text Available The aim of this work was to evaluate the effects of gibberellic acid (GA3 and aminoetoxyvinilglycine (AVG applied in preharvest spraying, on the retardation of the harvest and on the quality of persimmon fruits cv. Fuyu. The experiment was carried in randomized complete block design. The treatments were: control, 136mgL-1 of AVG, 272 mgL-1 of AVG, 36mgL-1 of GA3, 72mgL-1 of GA3 and 136mgL-1 of AVG + 36mgL-1 of GA3, spraying 30 days before the first harvest. The fruits were harvested twice and stored at 4ºC. The chemical and physical evaluations of the fruits were carried out the date of the harvest and at intervals of 15 days followed by four days at 20ºC. In conclusion, the application of AVG (136mgL-1 or GA3 (72mgL-1 maintained the firmness of the fruits and delayed harvest by twenty days. However, fruits harvested in the initial state of ripening were more sensitive to chilling injury and were unable to support 15 days of storage at 4ºC. The plant growth regulators were not efficient in prolonged storage due to the fact that the concentration of sugars was lower in the treatments than in the control.

Using Fuzzy Gaussian Inference and Genetic Programming to Classify 3D Human Motions

Science.gov (United States)

Khoury, Mehdi; Liu, Honghai

This research introduces and builds on the concept of Fuzzy Gaussian Inference (FGI) (Khoury and Liu in Proceedings of UKCI, 2008 and IEEE Workshop on Robotic Intelligence in Informationally Structured Space (RiiSS 2009), 2009) as a novel way to build Fuzzy Membership Functions that map to hidden Probability Distributions underlying human motions. This method is now combined with a Genetic Programming Fuzzy rule-based system in order to classify boxing moves from natural human Motion Capture data. In this experiment, FGI alone is able to recognise seven different boxing stances simultaneously with an accuracy superior to a GMM-based classifier. Results seem to indicate that adding an evolutionary Fuzzy Inference Engine on top of FGI improves the accuracy of the classifier in a consistent way.

heteroHarvest: Harvesting Information from Heterogeneous Sources

DEFF Research Database (Denmark)

Qureshi, Pir Abdul Rasool; Memon, Nasrullah; Wiil, Uffe Kock

2011-01-01

The abundance of information regarding any topic makes the Internet a very good resource. Even though searching the Internet is very easy, what remains difficult is to automate the process of information extraction from the available online information due to the lack of structure and the diversity...... in the sharing methods. Most of the times, information is stored in different proprietary formats, complying with different standards and protocols which makes tasks like data mining and information harvesting very difficult. In this paper, an information harvesting tool (heteroHarvest) is presented...... with objectives to address these problems by filtering the useful information and then normalizing the information in a singular non hypertext format. Finally we describe the results of experimental evaluation. The results are found promising with an overall error rate equal to 6.5% across heterogeneous formats....

Classifier for gravitational-wave inspiral signals in nonideal single-detector data

Science.gov (United States)

Kapadia, S. J.; Dent, T.; Dal Canton, T.

2017-11-01

We describe a multivariate classifier for candidate events in a templated search for gravitational-wave (GW) inspiral signals from neutron-star-black-hole (NS-BH) binaries, in data from ground-based detectors where sensitivity is limited by non-Gaussian noise transients. The standard signal-to-noise ratio (SNR) and chi-squared test for inspiral searches use only properties of a single matched filter at the time of an event; instead, we propose a classifier using features derived from a bank of inspiral templates around the time of each event, and also from a search using approximate sine-Gaussian templates. The classifier thus extracts additional information from strain data to discriminate inspiral signals from noise transients. We evaluate a random forest classifier on a set of single-detector events obtained from realistic simulated advanced LIGO data, using simulated NS-BH signals added to the data. The new classifier detects a factor of 1.5-2 more signals at low false positive rates as compared to the standard "reweighted SNR" statistic, and does not require the chi-squared test to be computed. Conversely, if only the SNR and chi-squared values of single-detector events are available, random forest classification performs nearly identically to the reweighted SNR.

Classifying Microorganisms

DEFF Research Database (Denmark)

Sommerlund, Julie

2006-01-01

This paper describes the coexistence of two systems for classifying organisms and species: a dominant genetic system and an older naturalist system. The former classifies species and traces their evolution on the basis of genetic characteristics, while the latter employs physiological characteris......This paper describes the coexistence of two systems for classifying organisms and species: a dominant genetic system and an older naturalist system. The former classifies species and traces their evolution on the basis of genetic characteristics, while the latter employs physiological...... characteristics. The coexistence of the classification systems does not lead to a conflict between them. Rather, the systems seem to co-exist in different configurations, through which they are complementary, contradictory and inclusive in different situations-sometimes simultaneously. The systems come...

Toward a semi-mechanical harvesting platform system for harvesting blueberries with fresh-market quality

Science.gov (United States)

Major concerns related to harvesting blueberries for fresh market with over-the-row (OTR) harvesters are that the quality of the fruit harvested with OTR machines is generally low and ground loss is excessive. Machine-harvested blueberries have more internal bruise and usually soften rapidly in col...

Development of multi-functional combine harvester with grain harvesting and straw baling

International Nuclear Information System (INIS)

Tang, Z.; Li, Y.; Cheng, C.

2017-01-01

The decomposition and burning of straw results in serious environmental pollution, and research is needed to improve strategies for straw collection to reduce pollution. This work presents an integrated design of multi-functional rice combine harvester that allows grain harvesting and straw baling. This multi-functional combine harvester could reduce the energy consumption required for rice harvesting and simplify the process of harvesting and baling. The transmission schematic, matching parameters and the rotation speed of threshing cylinder and square baler were designed and checked. Then the evaluation of grain threshing and straw baling were tested on a transverse threshing cylinders device tes rig and straw square bales compression test rig. The test results indicated that, with a feeding rate of 3.0 kg/s, the remaining straw flow rate at the discharge outlet was only 1.22 kg/s, which indicates a variable mass threshing process by the transverse threshing cylinder. Then the optimal diameter, length and rotating speed of multi-functional combine harvester transverse threshing cylinder were 554 mm, 1590 mm, and 850 r/min, respectively. The straw bale compression rotating speed of crank compression slider and piston was 95 r/min. Field trials by the multi-functional combine harvester formed bales with height×width×length of 40×50×54-63 cm, bale mass of 22.5 to 26.0 kg and bale density 206 to 216 kg/m3. This multi-functional combine harvester could be used for stem crops (such as rice, wheat and soybean) grain harvesting and straw square baling, which could reduce labor cost and power consumption.

Development of multi-functional combine harvester with grain harvesting and straw baling

Energy Technology Data Exchange (ETDEWEB)

Tang, Z.; Li, Y.; Cheng, C.

2017-09-01

The decomposition and burning of straw results in serious environmental pollution, and research is needed to improve strategies for straw collection to reduce pollution. This work presents an integrated design of multi-functional rice combine harvester that allows grain harvesting and straw baling. This multi-functional combine harvester could reduce the energy consumption required for rice harvesting and simplify the process of harvesting and baling. The transmission schematic, matching parameters and the rotation speed of threshing cylinder and square baler were designed and checked. Then the evaluation of grain threshing and straw baling were tested on a transverse threshing cylinders device tes rig and straw square bales compression test rig. The test results indicated that, with a feeding rate of 3.0 kg/s, the remaining straw flow rate at the discharge outlet was only 1.22 kg/s, which indicates a variable mass threshing process by the transverse threshing cylinder. Then the optimal diameter, length and rotating speed of multi-functional combine harvester transverse threshing cylinder were 554 mm, 1590 mm, and 850 r/min, respectively. The straw bale compression rotating speed of crank compression slider and piston was 95 r/min. Field trials by the multi-functional combine harvester formed bales with height×width×length of 40×50×54-63 cm, bale mass of 22.5 to 26.0 kg and bale density 206 to 216 kg/m3. This multi-functional combine harvester could be used for stem crops (such as rice, wheat and soybean) grain harvesting and straw square baling, which could reduce labor cost and power consumption.

A nonlinear multi-mode wideband piezoelectric vibration-based energy harvester using compliant orthoplanar spring

Energy Technology Data Exchange (ETDEWEB)

Dhote, Sharvari, E-mail: sharvari.dhote@mail.utoronto.ca; Zu, Jean; Zhu, Yang [Department of Mechanical and Industrial Engineering, University of Toronto, 5 King' s College Road, Toronto, Ontario M5S-3G8 (Canada)

2015-04-20

In this paper, a nonlinear wideband multi-mode piezoelectric vibration-based energy harvester (PVEH) is proposed based on a compliant orthoplanar spring (COPS), which has an advantage of providing multiple vibration modes at relatively low frequencies. The PVEH is made of a tri-leg COPS flexible structure, where three fixed-guided beams are capable of generating strong nonlinear oscillations under certain base excitation. A prototype harvester was fabricated and investigated through both finite-element analysis and experiments. The frequency response shows multiple resonance which corresponds to a hardening type of nonlinear resonance. By adding masses at different locations on the COPS structure, the first three vibration modes are brought close to each other, where the three hardening nonlinear resonances provide a wide bandwidth for the PVEH. The proposed PVEH has enhanced performance of the energy harvester in terms of a wide frequency bandwidth and a high-voltage output under base excitations.

A cascade of classifiers for extracting medication information from discharge summaries

Directory of Open Access Journals (Sweden)

Halgrim Scott

2011-07-01

Full Text Available Abstract Background Extracting medication information from clinical records has many potential applications, and recently published research, systems, and competitions reflect an interest therein. Much of the early extraction work involved rules and lexicons, but more recently machine learning has been applied to the task. Methods We present a hybrid system consisting of two parts. The first part, field detection, uses a cascade of statistical classifiers to identify medication-related named entities. The second part uses simple heuristics to link those entities into medication events. Results The system achieved performance that is comparable to other approaches to the same task. This performance is further improved by adding features that reference external medication name lists. Conclusions This study demonstrates that our hybrid approach outperforms purely statistical or rule-based systems. The study also shows that a cascade of classifiers works better than a single classifier in extracting medication information. The system is available as is upon request from the first author.

Stand, Harvest, and Equipment Interactions in Simulated Harvesting Prescriptions

Science.gov (United States)

Jingxin Wang; W. Dale Greene; Bryce J. Stokes

1998-01-01

We evaluated potential interactions of stand type, harvesting method, and equipment in an experiment using interactive simulation. We examined three felling methods (chain saw, feller-buncher, harvester) and two extraction methods (grapple skidder and forwarder) performing clearcuts, sheltenvood cuts, and single-tree selection cuts in both an uneven-aged natural stand...

Opinions of Forest Managers, Loggers, and Forest Landowners in North Carolina regarding Biomass Harvesting Guidelines

Directory of Open Access Journals (Sweden)

Diane Fielding

2012-01-01

Full Text Available Woody biomass has been identified as an important renewable energy source capable of offsetting fossil fuel use. The potential environmental impacts associated with using woody biomass for energy have spurred development of biomass harvesting guidelines (BHGs in some states and proposals for BHGs in others. We examined stakeholder opinions about BHGs through 60 semistructured interviews with key participants in the North Carolina, USA, forest business sector—forest managers, loggers, and forest landowners. Respondents generally opposed requirements for new BHGs because guidelines added to best management practices (BMPs. Most respondents believed North Carolina’s current BMPs have been successful and sufficient in protecting forest health; biomass harvesting is only an additional component to harvesting with little or no modification to conventional harvesting operations; and scientific research does not support claims that biomass harvesting negatively impacts soil, water quality, timber productivity, or wildlife habitat. Some respondents recognized possible benefits from the implementation of BHGs, which included reduced site preparation costs and increases in proactive forest management, soil quality, and wildlife habitat. Some scientific literature suggests that biomass harvests may have adverse site impacts that require amelioration. The results suggest BHGs will need to be better justified for practitioners based on the scientific literature or linked to demand from new profitable uses or subsidies to offset stakeholder perceptions that they create unnecessary costs.

Philosophia ad bellum

Directory of Open Access Journals (Sweden)

Yu. O. Loboda

2014-06-01

Full Text Available In the paper «Philosophia ad bellum» is being realized an attempt to classify philosophic approaches to the study of phenomenon of war by the analogy with the structure of «Just war theory» – 1. Philosophia ad bellum – «philosophy for war», where are investigated ways of using of philosophic methods of cognition in applied military sciences; 2. Philosophia supra bello – «philosophy above war», which investigates world­view, historic­philosophic, existential, logic­epistemological aspects of war; 3. Philosophia contra belli – «philosophy against war», where research of the essence of war gets its logical conclusion in grounding of the absurdity of thinking schemes which justify war as an act of violence. In the article was made historic­philosophic overview of the part «Philosophia ad bellum», where were showed tangent questions, which are considered by philosophic logic and theory of strategic intelligence. It was stated, that specialists if military intelligence admit the important role of researches in logic and theory of cognition in their professional work; were defined basic questions, which have the most essential interest for military professionals. There were analyzed ways of using of philosophic methods in developing military strategies, was made a conclusion that philosophy can be a basis of strategic failures and victories as well.

Effect of time of harvest, stage of fruit ripening, and post-harvest ...

African Journals Online (AJOL)

Seeds were extracted from half of the fruits harvested from each stage immediately after harvest while the other halves were stored at room temperature to ripen to the soft-red stage before seed extraction. Fruit weight in both cultivars decreased with plant age. Fruits harvested at the yellow-ripe stage produced the highest ...

Harvesting energy from airflow with a michromachined piezoelectric harvester inside a Helmholtz resonator

NARCIS (Netherlands)

Matova, S.P.; Elfrink, R.; Vullers, R.J.M.; Schaijk, R. van

2011-01-01

In this paper we report an airflow energy harvester that combines a piezoelectric energy harvester with a Helmholtz resonator. The resonator converts airflow energy to air oscillations which in turn are converted into electrical energy by a piezoelectric harvester. Two Helmholtz resonators with

Fog Harvesting with Harps.

Science.gov (United States)

Shi, Weiwei; Anderson, Mark J; Tulkoff, Joshua B; Kennedy, Brook S; Boreyko, Jonathan B

2018-04-11

Fog harvesting is a useful technique for obtaining fresh water in arid climates. The wire meshes currently utilized for fog harvesting suffer from dual constraints: coarse meshes cannot efficiently capture microscopic fog droplets, whereas fine meshes suffer from clogging issues. Here, we design and fabricate fog harvesters comprising an array of vertical wires, which we call "fog harps". Under controlled laboratory conditions, the fog-harvesting rates for fog harps with three different wire diameters were compared to conventional meshes of equivalent dimensions. As expected for the mesh structures, the mid-sized wires exhibited the largest fog collection rate, with a drop-off in performance for the fine or coarse meshes. In contrast, the fog-harvesting rate continually increased with decreasing wire diameter for the fog harps due to efficient droplet shedding that prevented clogging. This resulted in a 3-fold enhancement in the fog-harvesting rate for the harp design compared to an equivalent mesh.

A new harvest operation cost model to evaluate forest harvest layout alternatives

Science.gov (United States)

Mark M. Clark; Russell D. Meller; Timothy P. McDonald; Chao Chi Ting

1997-01-01

The authors develop a new model for harvest operation costs that can be used to evaluate stands for potential harvest. The model is based on felling, extraction, and access costs, and is unique in its consideration of the interaction between harvest area shapes and access roads. The scientists illustrate the model and evaluate the impact of stand size, volume, and road...

Energy harvesting for wireless sensors by using piezoelectric transducers

Energy Technology Data Exchange (ETDEWEB)

Duerager, Christian [Empa, Swiss Federal Laboratories for Materials Science and Technology, Duebendorf (Switzerland)

2012-07-01

Wireless sensor technology, which integrates transducers, measurement electronics and wireless communication, has become increasingly vital in structural health monitoring (SHM) applications. Compared to traditional wired systems, wireless solutions reduce the installation time and costs and are not subjected to breakage caused by harsh weather conditions or other extreme events. Because of the low installation costs, wireless sensor networks allow the deployment of a big number of wireless sensor nodes on the structures. Moreover, the nodes can be placed on particularly critical components of the structure difficult to reach by wires. In most of the cases the power supply are conventional batteries, which could be a problem because of their finite life span. Furthermore, in the case of wireless sensor nodes located on structures, it is often advantageous to embed them, which makes an access impossible. Therefore, if a method of obtaining the untapped energy surrounding these sensors was implemented, significant life could be added to the power supply. Various approaches to energy harvesting and energy storage are discussed and limitations associated with the current technology are addressed. In this paper we first discuss the research that has been performed in the area of energy harvesting for wireless sensor technologies by using the ambient vibration energy. In many cases the energy produced by the ambient vibrations is far too small to directly power a wireless sensor node. Therefore, in a second step we discuss the development process for an electronic energy harvesting circuit optimized for piezoelectric transducers. In the last part of this paper an experiment with different piezoelectric transducers and their applicability for energy harvesting applications on vibrating structures will be discussed. (orig.)

Microalgae harvesting techniques: A review.

Science.gov (United States)

Singh, Gulab; Patidar, S K

2018-07-01

Microalgae with wide range of commercial applications have attracted a lot of attention of the researchers in the last few decades. However, microalgae utilization is not economically sustainable due to high cost of harvesting. A wide range of solid - liquid separation techniques are available for microalgae harvesting. The techniques include coagulation and flocculation, flotation, centrifugation and filtration or a combination of various techniques. Despite the importance of harvesting to the economics and energy balance, there is no universal harvesting technique for microalgae. Therefore, this review focuses on assessing technical, economical and application potential of various harvesting techniques so as to allow selection of an appropriate technology for cost effectively harvesting of microalgae from their culture medium. Various harvesting and concentrating techniques of microalgae were reviewed to suggest order of suitability of the techniques for four main microalgae applications i.e biofuel, human and animal food, high valued products, and water quality restoration. For deciding the order of suitability, a comparative analysis of various harvesting techniques based on the six common criterions (i.e biomass quality, cost, biomass quantity, processing time, species specific and toxicity) has been done. Based on the order of various techniques vis-a-vis various criteria and preferred order of criteria for various applications, order of suitability of harvesting techniques for various applications has been decided. Among various harvesting techniques, coagulation and flocculation, centrifugation and filtration were found to be most suitable for considered applications. These techniques may be used alone or in combination for increasing the harvesting efficiency. Copyright © 2018 Elsevier Ltd. All rights reserved.

Double relaxation via AdS/CFT

Science.gov (United States)

Amiri-Sharifi, S.; Ali-Akbari, M.; Kishani-Farahani, A.; Shafie, N.

2016-08-01

We exploit the AdS/CFT correspondence to investigate thermalization in an N = 2 strongly coupled gauge theory including massless fundamental matter (quark). More precisely, we consider the response of a zero temperature state of the gauge theory under influence of an external electric field which leads to a time-dependent current. The holographic dual of the above set-up is given by introducing a time-dependent electric field on the probe D7-brane embedded in an AdS5 ×S5 background. In the dual gravity theory an apparent horizon forms on the brane which, according to AdS/CFT dictionary, is the counterpart of the thermalization process in the gauge theory side. We classify different functions for time-dependent electric field and study their effect on the apparent horizon formation. In the case of pulse functions, where the electric field varies from zero to zero, apart from non-equilibrium phase, we observe the formation of two separate apparent horizons on the brane. This means that the state of the gauge theory experiences two different temperature regimes during its time evolution.

Voluntary intake, digestibility and nitrogen utilization by sheep fed ensiled grass clover mixture harvested at three stages of maturity

Directory of Open Access Journals (Sweden)

Marina Vranić

2008-12-01

Full Text Available The objective of this experiment was to study the effects of grass maturity at harvest on silage ad libitum intake, in vivo digestibility and N retention in wether sheep. The sward was harvested at the stem elongation, tasseling and flowering growth stages of orchardgrass (Dactylis glomerata. Three silages were offered to four Charolais wether sheep in an incomplete change over design with four periods. As the crop matured, there was an increase (P<0.001 in dry matter (DM, organic matter (OM and acid detergent fiber (ADF concentration and a decrease in crude protein (CP concentration (P<0.001. Increasing maturity of grass ensiled showed a linear decrease (P<0.01 in voluntary silage intake of DM, OM, neutral detergent fiber (NDF, a linear decrease (P<0.01 in digestibility of silage DM, OM, NDF, ADF, CP, and a linear decrease in nitrogen balance (P<0.01. No quadratic response was recorded in silage intake, digestibility or N balance. The results suggest that grass maturity at harvest influences the nutritive value of grass silage, in terms of ad libitum intake, in vivo digestibility and N retention in sheep, as a result of changes in chemical composition.

The dynamic characteristics of harvesting energy from mechanical vibration via piezoelectric conversion

International Nuclear Information System (INIS)

Fan Kang-Qi; Ming Zheng-Feng; Xu Chun-Hui; Chao Feng-Bo

2013-01-01

As an alternative power solution for low-power devices, harvesting energy from the ambient mechanical vibration has received increasing research interest in recent years. In this paper we study the transient dynamic characteristics of a piezoelectric energy harvesting system including a piezoelectric energy harvester, a bridge rectifier, and a storage capacitor. To accomplish this, this energy harvesting system is modeled, and the charging process of the storage capacitor is investigated by employing the in-phase assumption. The results indicate that the charging voltage across the storage capacitor and the gathered power increase gradually as the charging process proceeds, whereas the charging rate slows down over time as the charging voltage approaches to the peak value of the piezoelectric voltage across the piezoelectric materials. In addition, due to the added electrical damping and the change of the system natural frequency when the charging process is initiated, a sudden drop in the vibration amplitude is observed, which in turn affects the charging rate. However, the vibration amplitude begins to increase as the charging process continues, which is caused by the decrease in the electrical damping (i.e., the decrease in the energy removed from the mechanical vibration). This electromechanical coupling characteristic is also revealed by the variation of the vibration amplitude with the charging voltage. (electromagnetism, optics, acoustics, heat transfer, classical mechanics, and fluid dynamics)

Timber harvest as the predominant disturbance regime in northeastern U.S. forests: Effects of harvest intensification

Science.gov (United States)

Brown, Michelle L.; Canham, Charles D.; Murphy, Lora; Donovan, Therese M.

2018-01-01

Harvesting is the leading cause of adult tree mortality in forests of the northeastern United States. While current rates of timber harvest are generally sustainable, there is considerable pressure to increase the contribution of forest biomass to meet renewable energy goals. We estimated current harvest regimes for different forest types and regions across the U.S. states of New York, Vermont, New Hampshire, and Maine using data from the U.S. Forest Inventory and Analysis Program. We implemented the harvest regimes in SORTIE‐ND, an individual‐based model of forest dynamics, and simulated the effects of current harvest regimes and five additional harvest scenarios that varied by harvest frequency and intensity over 150 yr. The best statistical model for the harvest regime described the annual probability of harvest as a function of forest type/region, total plot basal area, and distance to the nearest improved road. Forests were predicted to increase in adult aboveground biomass in all harvest scenarios in all forest type and region combinations. The magnitude of the increase, however, varied dramatically—increasing from 3% to 120% above current landscape averages as harvest frequency and intensity decreased. The variation can be largely explained by the disproportionately high harvest rates estimated for Maine as compared with the rest of the region. Despite steady biomass accumulation across the landscape, stands that exhibited old‐growth characteristics (defined as ≥300 metric tons of biomass/hectare) were rare (8% or less of stands). Intensified harvest regimes had little effect on species composition due to widespread partial harvesting in all scenarios, resulting in dominance by late‐successional species over time. Our analyses indicate that forest biomass can represent a sustainable, if small, component of renewable energy portfolios in the region, although there are tradeoffs between carbon sequestration in forest biomass and sustainable

Supersymmetric AdS3, AdS2 and bubble solutions

International Nuclear Information System (INIS)

Gauntlett, Jerome P.; Waldram, Daniel; Kim, Nakwoo

2007-01-01

We present new supersymmetric AdS 3 solutions of type IIB supergravity and AdS 2 solutions of D = 11 supergravity. The former are dual to conformal field theories in two dimensions with N = (0, 2) supersymmetry while the latter are dual to conformal quantum mechanics with two supercharges. Our construction also includes AdS 2 solutions of D = 11 supergravity that have non-compact internal spaces which are dual to three-dimensional N = 2 superconformal field theories coupled to point-like defects. We also present some new bubble-type solutions, corresponding to BPS states in conformal theories, that preserve four supersymmetries

Analysis of factors affecting the mechanical olive harvesting in Guilan province

Directory of Open Access Journals (Sweden)

H Abedi

2017-05-01

Full Text Available Introduction Olive is one of the most valuable worldwide trees that produces useful products having high nutritional values. It is widely grown in many parts of world. The cost of olives hand picking is estimated to be about two-thirds of the total gross return of olive production. Therefore, various types of olive harvesting machineries were developed in the world. Guilan Province of Iran is one of the leading regions for olives production in Iran. At the present time, almost all olives produced in Guilan province of Iran are manually harvested. Review of the reports showed that no research was performed to study the factors affecting the development of mechanized olive picking in Guilan Province, Iran. Due to the complexity of using the olive harvest machineries, identifying the factors affecting of their application is essential. Therefore, a Delphi study were conducted to identify and analysis the drivers and barriers for mechanized olive harvest in Guilan province, Iran. Materials and Methods This research was conducted using the Delphi technique in Guilan Province, Northern Iran. Delphi technique is a structured process to gather and classify the knowledge of a group of experts. Through consultation with professors and researchers in related institutions, 22 experts from the subsidiary offices of agricultural organization of Guilan Province were selected for the study. In the first round of the study, the participants were asked to answer to two open questions about the driving factors and barriers of mechanical olive harvest in Guilan Province. Nineteen items were found as driving factors and seventeen as barriers for developing the mechanical olive harvesting in Guilan Province. In the second phase of the study, the respondents were asked to answer to the all items written in the form of a five-level Likert scale, and finally, experts of panel were asked to answer to the top 10 items of driving factors and barriers in percent form. The

A method for mass harvesting islets (Brockmann bodies) from teleost fish.

Science.gov (United States)

Yang, H; Wright, J R

1995-01-01

In certain species of fish, the insulin-producing tissue is uniquely located in separate structures called Brockmann bodies (BBs). Tilapia BBs have been shown to be a simple and inexpensive source of islet cells for xenotransplantation research. Each donor tilapia contains roughly 12-15 BBs, measuring from 0.3 to 5.0 mm in maximum dimension, in a triangular region of adipose tissue bounded by the liver, stomach, and spleen/gallbladder. At present, the larger BBs (usually 2-4) are harvested by microdissecting these "BB regions" using jeweler's forceps and microvascular scissors while being visualized with the aid of a dissecting microscope. It is a simple but time-consuming task that would not be applicable for harvesting massive amounts of BB tissue for large animal studies. Therefore, we have developed an easier and more efficient method of harvesting BBs based on a standard enzymatic method for isolating human adipocytes. BB regions are harvested from donor fish and pooled into a 50 mL plastic tube containing collagenase Type II (3 mg/mL) in Hank's balanced salt solution (HBSS); the tube is then placed in a 37 degrees C waterbath/shaker for roughly 15 min. The exact length of the digestion interval is determined by visual inspection of the tube to determine whether the BBs have been liberated. The digestion is then stopped by adding excess cold HBSS. The adipocytes float while the BBs and residual connective tissue (i.e., a few blood vessels, nerves, and bile ducts) form a pellet. The pellet is washed several times in HBSS and then placed in a culture dish. The BBs are easily handpicked with a siliconized pipette. Based on functional data and DNA content, this new method roughly doubles or triples our yield of BB tissue per donor fish. To determine whether BBs harvested in this manner functioned in a manner similar to those harvested by microdissection, we performed a series of transplants using mass-harvested BBs. Long-term normoglycemia was achieved in

Design optimization of harvester head and actuation system of forest harvester

DEFF Research Database (Denmark)

Andersen, Torben Ole; Hansen, Michael R.; Mouritsen, Ole Ø.

2005-01-01

This paper is on the analysis and subsequent efficiency optimization of a forrest harvester. As basis for the optimization the existing machine has undergone substantial experimental testing with a view to determine the loading that the harvester head is subjected to and also the corresponding...

Harvest of table olives by mechanical harvesting equipment

Directory of Open Access Journals (Sweden)

Filippo Gambella

2013-09-01

Full Text Available In this work, we have evaluated the performance, of an electric comb equipped with five undulated fingers used for mechanized the harvesting of table olives. The first aim of the work was to test three different types of coating materials used for covering the fingers: Silicon (S, Vulcanized rubber (VR and Natural rubber (NR. The diameter of the coating materials tested were 7mm (D1, 14 mm (D2, 19 mm (D3 in order to evaluate the damage of different working conditions on the intact olives. During harvesting, silicon at 7mm and 14mm resulted in the largest percentage of undamaged the fruit (67% and 65%, natural rubber 63% and vulcanized rubber at the 54%. The second aim was to evaluate the combination, in terms of the best performance, of the machines used for mechanized harvesting of table olives. Several factors have been examined: undulating fingers variation thickness, different rotational speeds and different coating materials used to reduce the impact damage on olives. From the tests on olive tree we have determined that while plastic materials (S and (NR appear to have a positive role in harvest quality, the vibration transmitted to the operator’s hand is great from 6.48 m/s2 for S to 6.31 m/ s2 for NR and 2.92 m/s2 for VR, respect to the materials used.

2005 wood harvests in France - a definite recovery for timber and dendro-energy

International Nuclear Information System (INIS)

Cinotti, B.

2007-01-01

After dropping to 32.8 million m 3 in 2003, sales of wood harvests continue the recovery that began in 2004 and have reached 37.2 million m 3 (+ 5%) i.e., slightly more than the level reached prior to the 1999 storms (36.9 million m 3 ). Workable timber sales have increased by 5.9% up to 22.1 million m 3 but are nonetheless 4.5% below their 1999 level (23.2 million m 3 ). Industrial round-wood harvests have remained stable at 12.2 million m 3 (of which 11.8 are pulpwood). Sales of firewood have increased 23% (2.9 million m 3 ). Pre-tax roadside value of the entire wood harvest is estimated to be 1.64 billion Euro. French production of sawing timber is 9.7 million cubic metres with sawn softwood timber stagnating (+ 0.5%) and a drop in sawn hardwood timber (- 4.6%). The effects of the storms at the end of 1999 on the business cycle are no longer perceptible. Their consequences on the structure of harvests and of businesses are beginning to be understood. Average wood prices increased considerably in 2005 and 2006. These rosier market conditions for unprocessed timber could be an opportunity to continue with restructuring of the sector, in particular so as to further streamline harvests and narrow the wide gap between loggable and actually logged volumes, as well as to review the distribution of added value between the various players in the forest-based industries. (authors)

Radio Frequency Energy Harvesting Sources

Directory of Open Access Journals (Sweden)

Action NECHIBVUTE

2017-12-01

Full Text Available This radio frequency (RF energy harvesting is an emerging technology and research area that promises to produce energy to run low-power wireless devices. The great interest that has recently been paid to RF harvesting is predominantly driven by the great progress in both wireless communication systems and broadcasting technologies that have availed a lot of freely propagating ambient RF energy. The principle aim of an RF energy harvesting system is to convert the received ambient RF energy into usable DC power. This paper presents a state of the art concise review of RF energy harvesting sources for low power applications, and also discusses open research questions and future research directions on ambient RF energy harvesting.

Long-Term Impacts of China’s New Commercial Harvest Exclusion Policy on Ecosystem Services and Biodiversity in the Temperate Forests of Northeast China

Directory of Open Access Journals (Sweden)

Kai Liu

2018-04-01

Full Text Available Temperate forests in Northeast China have been severely exploited by timber harvesting in the last century. To reverse this trend, China implemented the Classified Forest Management policy in the Natural Forest Conservation Program in 1998 to protect forests from excessive harvesting. However, the policy was unable to meet the 2020 commitment of increasing growing stock (set in the Kyoto Protocol because of high-intensity harvesting. Accordingly, China banned all commercial harvesting in Northeast China in 2014. In this study, we investigated the long-term impacts of the no commercial harvest (NCH policy on ecosystem services and biodiversity using a forest landscape model, LANDIS PRO 7.0, in the temperate forests of the Small Khingan Mountains, Northeast China. We designed three management scenarios: The H scenario (the Classified Forest Management policy used in the past, the NCH scenario (the current Commercial Harvest Exclusion policy, and the LT scenario (mitigation management, i.e., light thinning. We compared total aboveground forest biomass, biomass by tree species, abundance of old-growth forests, and diversity of tree species and age class in three scenarios from 2010 to 2100. We found that compared with the H scenario, the NCH scenario increased aboveground forest biomass, abundance of old-growth forests, and biomass of most timber species over time; however, it decreased the biomass of rare and protected tree species and biodiversity. We found that the LT scenario increased the biomass of rare and protected tree species and biodiversity in comparison with the NCH scenario, while it maintained aboveground forest biomass and abundance of old-growth forests at a high level (slightly less than the NCH scenario. We concluded there was trade-off between carbon storage and biodiversity. We also concluded that light thinning treatment was able to regulate the trade-off and alleviate the negative effects associated with the NCH policy. Our

The Effect of Red Pepper Waste Added to Compost on Selenium Content of Pleurotus citrinopileatus Singer

Directory of Open Access Journals (Sweden)

Fatih Kalyoncu

2016-03-01

Full Text Available In this study, selenium levels of P.citrinopileatus added different rates of red pepper waste to compost as a source of selenium were determined. For this purpose, six different compost groups were prepared and inoculated with P.citrinopileatus mycelia. Selenium levels of harvested mushrooms were analysed. In conclusion, 0.338 µg/g selenium were determined in one gram dry mushroom that red pepper waste added to compost at 5%. Mycelia growth and selenium accumulation were negatively affected by higher rates of red pepper waste.

Harvesting a short rotation forest

Energy Technology Data Exchange (ETDEWEB)

Perttu, K L [ed.

1984-12-01

Willow and Sallow, considered of great interest for Swedish conditions, present new problems in harvesting. Traditional logging techniques offer few elements of equipment or methods. Light whips may be comminuted to a bulk product, easy to handle, difficult to store, requiring a hot logging system - and requiring a heavy, powerful harvester. Aggregating the material introduces an intermediate wood-fuel unit, suitable for storing, transport and infeed into any comminuter. If the harvester produced billets it would require less energy for its operation and it may be used for other purposes such as pre-commercial thinning or row thinning during the growing season. A few groups of designers have worked on analyses of requirements and possible solutions. Test rigs for severing and bundling were built and evaluated. Public funding was made available for design work on harvesters. Five groups were selected to produce layout designs of large and small harvesters. An evaluation procedure was performed, leading to selection of two concepts, slightly reworked from their original shapes. One is a large self-propelled front-sutting harvester, the other is a harvesting unit to be mounted on a suitable farm tractor. With 3 refs.

Wood harvesting as chunkwood chips and multi-stage chipping; Puun korjuu palahakkeena ja monivaiheinen lastuaminen

Energy Technology Data Exchange (ETDEWEB)

Kaipainen, H; Seppaenen, V

1997-12-31

The task for the year 1995 was to define the preliminary results of the previous years, to measure the productivity of a harvester, designed for production of chunkwood, and the properties of the chunks. The costs of the PALAPUU method from the felling site to pulpwood chips were to be examined on this basis. Because the prototype of the harvester was not yet available for field tests, the costs were partially calculated on the basis of previous measurements, completed by productivity data obtained from the time-consumption measurements of a multi-tree harvester, applied with minor alteration for this purpose. According to the calculations the PALAPUU method cannot compete with partial-tree or shortwood methods. The profitability of the method could be improved by adding the transportation density and the productivity of the harvester. It is also possible to procure timber to the mill as partial-trees and to chunk it while feeding it into the drum. Chipping tests were made using the steel-frame-chipper owned by VTT Construction Technology. The blade construction of the chipper was changed so, that it was possible to adjust the cutting thickness of the chips to 4 mm, while in the previous mill-tests it had been 6 mm. The chips were used for cooking tests in the Department of Chemistry of the University of Jyvaeskylae. The results showed that the thinner chips were cooked further under the same cooking conditions. By using the chunkwood method it is possible to harvest 10-70 more biomass for the mills, than it is possible in the pulpwood harvesting

Wood harvesting as chunkwood chips and multi-stage chipping; Puun korjuu palahakkeena ja monivaiheinen lastuaminen

Energy Technology Data Exchange (ETDEWEB)

Kaipainen, H.; Seppaenen, V.

1996-12-31

The task for the year 1995 was to define the preliminary results of the previous years, to measure the productivity of a harvester, designed for production of chunkwood, and the properties of the chunks. The costs of the PALAPUU method from the felling site to pulpwood chips were to be examined on this basis. Because the prototype of the harvester was not yet available for field tests, the costs were partially calculated on the basis of previous measurements, completed by productivity data obtained from the time-consumption measurements of a multi-tree harvester, applied with minor alteration for this purpose. According to the calculations the PALAPUU method cannot compete with partial-tree or shortwood methods. The profitability of the method could be improved by adding the transportation density and the productivity of the harvester. It is also possible to procure timber to the mill as partial-trees and to chunk it while feeding it into the drum. Chipping tests were made using the steel-frame-chipper owned by VTT Construction Technology. The blade construction of the chipper was changed so, that it was possible to adjust the cutting thickness of the chips to 4 mm, while in the previous mill-tests it had been 6 mm. The chips were used for cooking tests in the Department of Chemistry of the University of Jyvaeskylae. The results showed that the thinner chips were cooked further under the same cooking conditions. By using the chunkwood method it is possible to harvest 10-70 more biomass for the mills, than it is possible in the pulpwood harvesting

High relative humidity pre-harvest reduces post-harvest proliferation of Salmonella in tomatoes.

Science.gov (United States)

Devleesschauwer, Brecht; Marvasi, Massimiliano; Giurcanu, Mihai C; Hochmuth, George J; Speybroeck, Niko; Havelaar, Arie H; Teplitski, Max

2017-09-01

Outbreaks of human illness caused by enteric pathogens such as Salmonella are increasingly linked to the consumption of fruits and vegetables. Knowledge on the factors affecting Salmonella proliferation on fresh produce therefore becomes increasingly important to safeguard public health. Previous experiments showed a limited impact of pre-harvest production practices on Salmonella proliferation on tomatoes, but suggested a significant effect of harvest time. We explored the data from two previously published and one unpublished experiment using regression trees, which allowed overcoming the interpretational difficulties of classical statistical models with higher order interactions. We assessed the effect of harvest time by explicitly modeling the climatic conditions at harvest time and by performing confirmatory laboratory experiments. Across all datasets, regression trees confirmed the dominant effect of harvest time on Salmonella proliferation, with humidity-related factors emerging as the most important underlying climatic factors. High relative humidity the week prior to harvest was consistently associated with lower Salmonella proliferation. A controlled lab experiment confirmed that tomatoes containing their native epimicrobiota supported significantly lower Salmonella proliferation when incubated at higher humidity prior to inoculation. The complex interactions between environmental conditions and the native microbiota of the tomato crop remain to be fully understood. Copyright © 2017 Elsevier Ltd. All rights reserved.

Just-in-time adaptive classifiers-part II: designing the classifier.

Science.gov (United States)

Alippi, Cesare; Roveri, Manuel

2008-12-01

Aging effects, environmental changes, thermal drifts, and soft and hard faults affect physical systems by changing their nature and behavior over time. To cope with a process evolution adaptive solutions must be envisaged to track its dynamics; in this direction, adaptive classifiers are generally designed by assuming the stationary hypothesis for the process generating the data with very few results addressing nonstationary environments. This paper proposes a methodology based on k-nearest neighbor (NN) classifiers for designing adaptive classification systems able to react to changing conditions just-in-time (JIT), i.e., exactly when it is needed. k-NN classifiers have been selected for their computational-free training phase, the possibility to easily estimate the model complexity k and keep under control the computational complexity of the classifier through suitable data reduction mechanisms. A JIT classifier requires a temporal detection of a (possible) process deviation (aspect tackled in a companion paper) followed by an adaptive management of the knowledge base (KB) of the classifier to cope with the process change. The novelty of the proposed approach resides in the general framework supporting the real-time update of the KB of the classification system in response to novel information coming from the process both in stationary conditions (accuracy improvement) and in nonstationary ones (process tracking) and in providing a suitable estimate of k. It is shown that the classification system grants consistency once the change targets the process generating the data in a new stationary state, as it is the case in many real applications.

Harvesting of short rotation coppice. Harvesting trials with a cut and storage system in Germany

Energy Technology Data Exchange (ETDEWEB)

Schweier, J.; Becker, G.

2012-11-01

Short rotation coppice (SRC) harvesting techniques are available in Germany, but broad experience and knowledge about machine performance and the related effective costs of harvesting operations are still missing. This information is crucial, as harvesting costs strongly influence the economic performance of the overall supply chain. Therefore, it was the aim of this study to collect and analyze productivity data of different harvesting systems for SRC. The combined cut and chip system on the one hand and the cut and storage system on the other hand were studied by literature review. Several studies analyze the combined cut and chip systems and the reported machine productivities showed great variations. The average was 30 green tons per scheduled machine hour (gt smh{sup -1}). Few studies are analysing the cut and storage system. They report that machines still are under development and that further research is needed. Therefore, time studies of harvesting operations using the cut and storage system were carried out. Five trials were performed with the harvesting machine 'Stemster MK III' developed by Nordic Biomass. The share of productive working time was 85% and the average productivity was 21 gt smh{sup -1}. These results were compared with values from the literature. Resulting harvesting costs were calculated per oven dry ton (Euro odt{sup -1}). The advantages and disadvantages of both harvesting systems are highlighted. (orig.)

Predicting conversion from MCI to AD using resting-state fMRI, graph theoretical approach and SVM.

Science.gov (United States)

Hojjati, Seyed Hani; Ebrahimzadeh, Ata; Khazaee, Ali; Babajani-Feremi, Abbas

2017-04-15

We investigated identifying patients with mild cognitive impairment (MCI) who progress to Alzheimer's disease (AD), MCI converter (MCI-C), from those with MCI who do not progress to AD, MCI non-converter (MCI-NC), based on resting-state fMRI (rs-fMRI). Graph theory and machine learning approach were utilized to predict progress of patients with MCI to AD using rs-fMRI. Eighteen MCI converts (average age 73.6 years; 11 male) and 62 age-matched MCI non-converters (average age 73.0 years, 28 male) were included in this study. We trained and tested a support vector machine (SVM) to classify MCI-C from MCI-NC using features constructed based on the local and global graph measures. A novel feature selection algorithm was developed and utilized to select an optimal subset of features. Using subset of optimal features in SVM, we classified MCI-C from MCI-NC with an accuracy, sensitivity, specificity, and the area under the receiver operating characteristic (ROC) curve of 91.4%, 83.24%, 90.1%, and 0.95, respectively. Furthermore, results of our statistical analyses were used to identify the affected brain regions in AD. To the best of our knowledge, this is the first study that combines the graph measures (constructed based on rs-fMRI) with machine learning approach and accurately classify MCI-C from MCI-NC. Results of this study demonstrate potential of the proposed approach for early AD diagnosis and demonstrate capability of rs-fMRI to predict conversion from MCI to AD by identifying affected brain regions underlying this conversion. Copyright © 2017 Elsevier B.V. All rights reserved.

Energy harvesting for microsystems

Energy Technology Data Exchange (ETDEWEB)

Ruichao Xu

2012-05-15

The purpose of this project is to design and fabricate piezoelectric energy harvesters based on integration of Pb(ZrxTi1-x)O3 (PZT) thick film technology and silicon microtechnology. The fabrication processes are carried out in close collaboration with Meggitt Sensing Systems (MSS) who has the unique expertise to screen print piezoelectric thick film layers, thus all screen printing steps are done by MSS while the silicon micromachining is carried out at Danchip facility at DTU. The presented energy harvesters are all based on using piezoelectric thick film operating in the 31-mode to generate power when strained. Three archetypes of the numerous fabricated energy harvesters will be presented in detail, they represent three major milestones in this project. The first energy harvester archetype has an unimorph cantilever beam, which consists of a 20 {mu}m silicon layer and 10-30 {mu}m screen printed PZT layer, anchored on a silicon frame at one end and attached to a silicon proof mass at the other. Electrodes will cover both side of the PZT layer, so the harvested energy can be collected electrically. The second archetype has a bimorph cantilever beam, which consists of two 15-35 {mu}m PZT layers, anchored on a silicon frame at the one end and attached to a silicon proof mass at the other. Electrodes are deposited below, between and above the two PZT layers. The root mean square (RMS) power output measured on this type of harvesters is as high as 37.1{mu}W at 1 g. The third archetype is similar to the first one, the screen printed PZT layer is replaced by a lead free piezoelectric material, (KxNa1-x)NbO3 (KNN). Some of the major challenges encountered during the development processes are bad adhesion, fragile structures and short circuiting through the PZT layer. All of which have being fully or partially solved in this project. The final energy harvesters are designed to be used in an energy harvester powered wireless sensing system. (Author)

Hybrid classifiers methods of data, knowledge, and classifier combination

CERN Document Server

Wozniak, Michal

2014-01-01

This book delivers a definite and compact knowledge on how hybridization can help improving the quality of computer classification systems. In order to make readers clearly realize the knowledge of hybridization, this book primarily focuses on introducing the different levels of hybridization and illuminating what problems we will face with as dealing with such projects. In the first instance the data and knowledge incorporated in hybridization were the action points, and then a still growing up area of classifier systems known as combined classifiers was considered. This book comprises the aforementioned state-of-the-art topics and the latest research results of the author and his team from Department of Systems and Computer Networks, Wroclaw University of Technology, including as classifier based on feature space splitting, one-class classification, imbalance data, and data stream classification.

MECHANIZED HARVESTING TESTS PERFORMED BY GRAPE HARVESTERS IN SUPER INTENSIVE OLIVE ORCHARD CULTIVATION IN SPAIN

Directory of Open Access Journals (Sweden)

Gennaro Giametta

2009-06-01

Full Text Available Today also those countries boasting a century-old olive growing tradition have to look at the latest, most dynamic, non labour-intensive olive growing systems to abate production (notably, harvesting operations costs and remain competitive in a globalized market. This is why over the last few years super intensive olive orchard cultivation has been attracting a lot of interest on the part of olive growers all over the world as it accounts for an innovative model whereby olive groves are tailored to the special needs of grape harvesters. This paper reports the first results of experimental mechanical harvesting tests in a super-intensive olive cultivation. The study is intended to explore both productivity and work capacity of two of the most commonly used grape harvesters, Grégoire G120SW and New Holland Braud VX680, in a view to assessing their harvesting performance by a series of tests conducted in Spain. On the basis of the tests it was possible to verify that the machines are able to detach the almost all the drupes (more than 90%, with one only passage, and this independently of both size and location of drupes on the tree crown and of their maturity stage. Using these machines, two people can often carry out the whole harvest process: an operator driving the harvester and another person transferring the fruit from the harvester in the field to the olive oil mill for processing. With this system, the work speed is usually, in the best working conditions, about 1.7 km/hour and the average harvesting time is about 2.5-3 hours/ha. For the time being it is however impossible to draw definitive conclusions in terms of performance of the above cultivation systems and harvesting machines. Additional key observational studies are needed in the years to come to assess the efficiency of the entire model.

Energy-Harvesting Wireless Sensor Networks

DEFF Research Database (Denmark)

Fafoutis, Xenofon; Vuckovic, Dusan; Di Mauro, Alessio

2012-01-01

Energy Harvesting comprises a promising solution to one of the key problems faced by battery-powered Wireless Sensor Networks, namely the limited nature of the energy supply (finite battery capacity). By harvesting energy from the surrounding environment, the sensors can have a continuous lifetime...... Sensor Networks with energy harvesting capability....... without any needs for battery recharge or replacement. However, energy harvesting introduces a change to the fundamental principles based on which WSNs are designed and realized. In this poster we sketch some of the key research challenges as well as our ongoing work in designing and realizing Wireless...

Predicting Alzheimer's disease by classifying 3D-Brain MRI images using SVM and other well-defined classifiers

International Nuclear Information System (INIS)

Matoug, S; Abdel-Dayem, A; Passi, K; Gross, W; Alqarni, M

2012-01-01

Alzheimer's disease (AD) is the most common form of dementia affecting seniors age 65 and over. When AD is suspected, the diagnosis is usually confirmed with behavioural assessments and cognitive tests, often followed by a brain scan. Advanced medical imaging and pattern recognition techniques are good tools to create a learning database in the first step and to predict the class label of incoming data in order to assess the development of the disease, i.e., the conversion from prodromal stages (mild cognitive impairment) to Alzheimer's disease, which is the most critical brain disease for the senior population. Advanced medical imaging such as the volumetric MRI can detect changes in the size of brain regions due to the loss of the brain tissues. Measuring regions that atrophy during the progress of Alzheimer's disease can help neurologists in detecting and staging the disease. In the present investigation, we present a pseudo-automatic scheme that reads volumetric MRI, extracts the middle slices of the brain region, performs segmentation in order to detect the region of brain's ventricle, generates a feature vector that characterizes this region, creates an SQL database that contains the generated data, and finally classifies the images based on the extracted features. For our results, we have used the MRI data sets from the Alzheimer's Disease Neuroimaging Initiative (ADNI) database.

Cantilever piezoelectric energy harvester with multiple cavities

International Nuclear Information System (INIS)

S Srinivasulu Raju; M Umapathy; G Uma

2015-01-01

Energy harvesting employing piezoelectric materials in mechanical structures such as cantilever beams, plates, diaphragms, etc, has been an emerging area of research in recent years. The research in this area is also focused on structural tailoring to improve the harvested power from the energy harvesters. Towards this aim, this paper presents a method for improving the harvested power from a cantilever piezoelectric energy harvester by introducing multiple rectangular cavities. A generalized model for a piezoelectric energy harvester with multiple rectangular cavities at a single section and two sections is developed. A method is suggested to optimize the thickness of the cavities and the number of cavities required to generate a higher output voltage for a given cantilever beam structure. The performance of the optimized energy harvesters is evaluated analytically and through experimentation. The simulation and experimental results show that the performance of the energy harvester can be increased with multiple cavities compared to the harvester with a single cavity. (paper)

Metabolic profiling and predicting the free radical scavenging activity of guava (Psidium guajava L.) leaves according to harvest time by 1H-nuclear magnetic resonance spectroscopy.

Science.gov (United States)

Kim, So-Hyun; Cho, Somi K; Hyun, Sun-Hee; Park, Hae-Eun; Kim, Young-Suk; Choi, Hyung-Kyoon

2011-01-01

Guava leaves were classified and the free radical scavenging activity (FRSA) evaluated according to different harvest times by using the (1)H-NMR-based metabolomic technique. A principal component analysis (PCA) of (1)H-NMR data from the guava leaves provided clear clusters according to the harvesting time. A partial least squares (PLS) analysis indicated a correlation between the metabolic profile and FRSA. FRSA levels of the guava leaves harvested during May and August were high, and those leaves contained higher amounts of 3-hydroxybutyric acid, acetic acid, glutamic acid, asparagine, citric acid, malonic acid, trans-aconitic acid, ascorbic acid, maleic acid, cis-aconitic acid, epicatechin, protocatechuic acid, and xanthine than the leaves harvested during October and December. Epicatechin and protocatechuic acid among those compounds seem to have enhanced FRSA of the guava leaf samples harvested in May and August. A PLS regression model was established to predict guava leaf FRSA at different harvesting times by using a (1)H-NMR data set. The predictability of the PLS model was then tested by internal and external validation. The results of this study indicate that (1)H-NMR-based metabolomic data could usefully characterize guava leaves according to their time of harvesting.

Doctoral e-Theses; experiences in harvesting on a national and European level

CERN Multimedia

CERN. Geneva

2007-01-01

In many countries in Europe doctoral e-theses are an integrated part of institutional repositories, which have been set up in recent years. In some countries they have been harvested on a national level, like in the Netherlands with the ‘Promise of Science’ portal (http://www.darenet.nl/promiseofscience) . In October 2006 SURFfoundation (The Netherlands), JISC (UK) and DIVA (funded through BIBSAM in Sweden) started a common project to harvest repositories with e-theses on an international scale and to set up a freely accessible European portal and test in practice the interoperability. The project, which aims at creating a value added service for doctoral e-Theses, will finish in June 2007. In the presentation we will show some lessons learned and the first results of the Demonstrator, an interoperable portal of European doctoral e-theses in five countries: Denmark, Germany, the Netherlands, Sweden and the UK. Furthermore, we will present the developments regarding the European coordination of doctoral...

Energy harvesting for microsystems

DEFF Research Database (Denmark)

Xu, Ruichao

The purpose of this project is to design and fabricate piezoelectric energy harvesters based on integration of Pb(ZrxTi1-x)O3 (PZT) thick film technology and silicon microtechnology. The fabrication processes are carried out in close collaboration with Meggitt Sensing Systems (MSS) who has...... the unique expertise to screen print piezoelectric thick film layers, thus all screen printing steps are done by MSS while the silicon micromachining is carried out at Danchip facility at DTU. The presented energy harvesters are all based on using piezoelectric thick film operating in the 31-mode to generate...... power when strained. Three archetypes of the numerous fabricated energy harvesters will be presented in detail, they represent three major milestones in this project. The first energy harvester archetype has an unimorph cantilever beam, which consists of a 20 µm silicon layer and 10-30 µm screen printed...

Applying New Technologies to Transform Blueberry Harvesting

Directory of Open Access Journals (Sweden)

Fumiomi Takeda

2017-05-01

Full Text Available The growth of the blueberry industry in the past three decades has been remarkably robust. However, a labor shortage for hand harvesting, increasingly higher labor costs, and low harvest efficiencies are becoming bottlenecks for sustainable development of the fresh market blueberry production. In this study, we evaluated semi-mechanical harvesting systems consisting of a harvest-aid platform with soft fruit catching surfaces that collected the fruit detached by portable, hand-held, pneumatic shakers. The softer fruit catching surfaces were not glued to the hard sub-surfaces of the harvest-aid platform, but suspended over them. Also, the ergonomic aspect of operating powered harvesting equipment was determined. The pneumatic shakers removed 3.5 to 15 times more fruit (g/min than by hand. Soft fruit catching surfaces reduced impact force and bruise damage. Fruit firmness was higher in fruit harvested by hand compared to that by pneumatic shakers in some cultivars. The bruise area was less than 8% in fruit harvested by hand and with semi-mechanical harvesting system. The percentage of blue, packable fruit harvested by pneumatic shakers comprised as much as 90% of the total, but less than that of hand-harvested fruit. The ergonomic analysis by electromyography showed that muscle strain in the back, shoulders, and forearms was low in workers operating the light-weight, pneumatic shakers that were tethered to the platform with a tool balancer. The new harvesting method can reduce the labor requirement to about 100 hour/hectare/year and help to mitigate the rising labor cost and shortage of workers for harvesting fresh-market quality blueberries.

Review of magnetostrictive vibration energy harvesters

Science.gov (United States)

Deng, Zhangxian; Dapino, Marcelo J.

2017-10-01

The field of energy harvesting has grown concurrently with the rapid development of portable and wireless electronics in which reliable and long-lasting power sources are required. Electrochemical batteries have a limited lifespan and require periodic recharging. In contrast, vibration energy harvesters can supply uninterrupted power by scavenging useful electrical energy from ambient structural vibrations. This article reviews the current state of vibration energy harvesters based on magnetostrictive materials, especially Terfenol-D and Galfenol. Existing magnetostrictive harvester designs are compared in terms of various performance metrics. Advanced techniques that can reduce device size and improve performance are presented. Models for magnetostrictive devices are summarized to guide future harvester designs.

MRI Characterizes the Progressive Course of AD and Predicts Conversion to Alzheimer’s Dementia 24 Months Before Probable Diagnosis

Directory of Open Access Journals (Sweden)

Christian Salvatore

2018-05-01

Full Text Available There is no disease-modifying treatment currently available for AD, one of the more impacting neurodegenerative diseases affecting more than 47.5 million people worldwide. The definition of new approaches for the design of proper clinical trials is highly demanded in order to achieve non-confounding results and assess more effective treatment. In this study, a cohort of 200 subjects was obtained from the Alzheimer’s Disease Neuroimaging Initiative. Subjects were followed-up for 24 months, and classified as AD (50, progressive-MCI to AD (50, stable-MCI (50, and cognitively normal (50. Structural T1-weighted MRI brain studies and neuropsychological measures of these subjects were used to train and optimize an artificial-intelligence classifier to distinguish mild-AD patients who need treatment (AD + pMCI from subjects who do not need treatment (sMCI + CN. The classifier was able to distinguish between the two groups 24 months before AD definite diagnosis using a combination of MRI brain studies and specific neuropsychological measures, with 85% accuracy, 83% sensitivity, and 87% specificity. The combined-approach model outperformed the classification using MRI data alone (72% classification accuracy, 69% sensitivity, and 75% specificity. The patterns of morphological abnormalities localized in the temporal pole and medial-temporal cortex might be considered as biomarkers of clinical progression and evolution. These regions can be already observed 24 months before AD definite diagnosis. The best neuropsychological predictors mainly included measures of functional abilities, memory and learning, working memory, language, visuoconstructional reasoning, and complex attention, with a particular focus on some of the sub-scores of the FAQ and AVLT tests.

Performance evaluation of prototype mechanical cassava harvester ...

African Journals Online (AJOL)

Large-scale cassava harvesting, especially during the dry season, is a major constraint to its industrial demand and commercial production. Manual harvesting is slow and ... Results from field trials showed prototype harvesters weighing 268 – 310 kg can achieve optimum performance on ridged landforms. When harvested ...

Flow Energy Piezoelectric Bimorph Nozzle Harvester

Science.gov (United States)

Sherrit, Stewart (Inventor); Walkemeyer, Phillip E. (Inventor); Hall, Jeffrey L. (Inventor); Lee, Hyeong Jae (Inventor); Colonius, Tim (Inventor); Tosi, Phillipe (Inventor); Kim, Namhyo (Inventor); Sun, Kai (Inventor); Corbett, Thomas Gary (Inventor); Arrazola, Alvaro Jose (Inventor)

2016-01-01

A flow energy harvesting device having a harvester pipe includes a flow inlet that receives flow from a primary pipe, a flow outlet that returns the flow into the primary pipe, and a flow diverter within the harvester pipe having an inlet section coupled to the flow inlet, a flow constriction section coupled to the inlet section and positioned at a midpoint of the harvester pipe and having a spline shape with a substantially reduced flow opening size at a constriction point along the spline shape, and an outlet section coupled to the constriction section. The harvester pipe may further include a piezoelectric structure extending from the inlet section through the constriction section and point such that the fluid flow past the constriction point results in oscillatory pressure amplitude inducing vibrations in the piezoelectric structure sufficient to cause a direct piezoelectric effect and to generate electrical power for harvesting.

X-ray-induced specific-locus mutations in the ad-3 region of two-component heterokaryons of Neurospora crass

International Nuclear Information System (INIS)

De Serres, F.J.

1990-01-01

More extensive complementation tests than those performed initially on a series of 832 X-ray-induced specific-locus mutations in the adenine-4 (ad-3) region of a two-component heterokaryon (H-12) of Neurospora crassa showed that unexpectedly high frequencies of specific-locus mutations in the ad-3 region have additional, but separate, sites of recessive lethal damage in the immediately adjacent genetic regions. In the present paper, X-ray-induced irreparable ad-3 mutants of the folowing genotypes and numbers (ad-3A ad-3B, ad-3A ad-3B nic-2, and ad-3B nic-2) have also subjected to the same genetic fine structure analysis. These experiments, in the previous and present papers, were designed to determine the extent of the functional inactivation in the ad-3 and immediately adjacent genetic regions in individual mutants classified as presumptive multilocus deletions or multiplelocus mutations. The data in the present paper have shown that in Neurospora crassa most X-ray-induced irreparable mutants of genotype ad-3A ad-3B, ad-3A ad-3B nic-2, and ad-3 nic-2 map as a series of overlapping multilocus deletions. In addition, genetic fine structure analysis has shown that some of the mutants classified, initially, as multilocus deletions, are actually multiple-locus mutations: multilocus deletions with closely linked, and separate, sites of recessive lethal damage with a wide variety of genotyes. Combining data from the present experiments with previously published date, the frequency of multiple-locus mutations among X-ray-induced gene/point mutations and multilocus deletions in the ad-3 region is 6.2%. (author). 27 refs.; 4 figs.; 7 tab

Supergravity one-loop corrections on AdS7 and AdS3, higher spins and AdS/CFT

Directory of Open Access Journals (Sweden)

Matteo Beccaria

2015-03-01

Full Text Available As was shown earlier, the one-loop correction in 10d supergravity on AdS5×S5 corresponds to the contributions to the vacuum energy and 4d boundary conformal anomaly which are minus the values for one N=4 Maxwell supermultiplet, thus reproducing the subleading term in the N2−1 coefficient in the dual SU(N SYM theory. We perform similar one-loop computations in 11d supergravity on AdS7×S4 and 10d supergravity on AdS3×S3×T4. In the AdS7 case we find that the corrections to the 6d conformal anomaly a-coefficient and the vacuum energy are again minus the ones for one (2,0 tensor multiplet, suggesting that the total a-anomaly coefficient for the dual (2,0 theory is 4N3−9/4N−7/4 and thus vanishes for N=1. In the AdS3 case the one-loop correction to the vacuum energy or 2d central charge turns out to be equal to that of one free (4,4 scalar multiplet, i.e. is c=+6. This reproduces the subleading term in the central charge c=6(Q1Q5+1 of the dual 2d CFT describing decoupling limit of D5–D1 system. We also present the expressions for the 6d a-anomaly coefficient and vacuum energy contributions of general-symmetry higher spin field in AdS7 and consider their application to tests of vectorial AdS/CFT with the boundary conformal 6d theory represented by free scalars, spinors or rank-2 antisymmetric tensors.

Chemical composition and methane yield of reed canary grass as influenced by harvesting time and harvest frequency

DEFF Research Database (Denmark)

Kandel, Tanka Prasad; Sutaryo, Sutaryo; Møller, Henrik Bjarne

2013-01-01

This study examined the influence of harvest time on biomass yield, dry matter partitioning, biochemical composition and biological methane potential of reed canary grass harvested twice a month in one-cut (OC) management. The regrowth of biomass harvested in summer was also harvested in autumn...... as a two-cut management with (TC-F) or without (TC-U) fertilization after summer harvest. The specific methane yields decreased significantly with crop maturity that ranged from 384 to 315 and from 412 to 283 NL (normal litre) (kg VS)-1 for leaf and stem, respectively. Approximately 45% more methane...... was produced by the TC-F management (5430 Nm3 ha-1) as by the OC management (3735 Nm3 ha-1). Specific methane yield was moderately correlated with the concentrations of fibre components in the biomass. Larger quantity of biogas produced at the beginning of the biogas assay from early harvested biomass...

Long range excitonic transport in a biomimetic system inspired by the bacterial light-harvesting apparatus

Energy Technology Data Exchange (ETDEWEB)

Harel, Elad [Department of Chemistry, Northwestern University, 2145 Sheridan Road, Evanston, Illinois 60208 (United States)

2012-05-07

Photosynthesis, the process by which energy from sunlight drives cellular metabolism, relies on a unique organization of light-harvesting and reaction center complexes. Recently, the organization of light-harvesting LH2 complexes and dimeric reaction center-light-harvesting I-PufX core complexes in membranes of purple non-sulfur bacteria was revealed by atomic force microscopy [S. Bahatyrova et al., Nature (London) 430, 1058 (2004)]. Here, we discuss optimal exciton transfer in a biomimetic system closely modeled on the structure of LH2 and its organization within the membrane using a Markovian quantum model with dissipation and trapping added phenomenologically. In a deliberate manner, we neglect the high level detail of the bacterial light-harvesting complex and its interaction with the phonon bath in order to elucidate a set of design principles that may be incorporated in artificial pigment-scaffold constructs in a supramolecular assembly. We show that our scheme reproduces many of the most salient features found in their natural counterpart and may be largely explained by simple electrostatic considerations. Most importantly, we show that quantum effects act primarily to enforce robustness with respect to spatial and spectral disorder between and within complexes. The implications of such an arrangement are discussed in the context of biomimetic photosynthetic analogs capable of transferring energy efficiently across tens to hundreds of nanometers.

Long range excitonic transport in a biomimetic system inspired by the bacterial light-harvesting apparatus

International Nuclear Information System (INIS)

Harel, Elad

2012-01-01

Photosynthesis, the process by which energy from sunlight drives cellular metabolism, relies on a unique organization of light-harvesting and reaction center complexes. Recently, the organization of light-harvesting LH2 complexes and dimeric reaction center-light-harvesting I-PufX core complexes in membranes of purple non-sulfur bacteria was revealed by atomic force microscopy [S. Bahatyrova et al., Nature (London) 430, 1058 (2004)]. Here, we discuss optimal exciton transfer in a biomimetic system closely modeled on the structure of LH2 and its organization within the membrane using a Markovian quantum model with dissipation and trapping added phenomenologically. In a deliberate manner, we neglect the high level detail of the bacterial light-harvesting complex and its interaction with the phonon bath in order to elucidate a set of design principles that may be incorporated in artificial pigment-scaffold constructs in a supramolecular assembly. We show that our scheme reproduces many of the most salient features found in their natural counterpart and may be largely explained by simple electrostatic considerations. Most importantly, we show that quantum effects act primarily to enforce robustness with respect to spatial and spectral disorder between and within complexes. The implications of such an arrangement are discussed in the context of biomimetic photosynthetic analogs capable of transferring energy efficiently across tens to hundreds of nanometers.

How joint characteristics between a piezoelectric beam and the main structure affect the performance of an energy harvester

Science.gov (United States)

Jahani, K.; Rafiei, M. M.; Aghazadeh, P.

2017-09-01

In this paper, the influence of the joint region between a piezoelectric energy harvesting beam and the vibratory main structure is studied. The investigations are conducted in two separate sections, namely numerical and experimental studies. In numerical studies, the effects of nonlinear parameters on generated power are investigated while the joint characteristics the between vibrating base and a piezoelectric energy harvester are taken into consideration. A unimorph beam with a tip mass and a nonlinear piezoelectric layer that undergoes a large-amplitude deflection is considered as an energy harvester. By applying the Euler-Lagrange equation and Gauss’s law the mechanical and electrical equations of motion are obtained, respectively. The excitation frequency is assumed to be close to the first natural frequency. Thus, a unimodal response is considered to be like that of a system with a single degree of freedom (SDOF). The joint between the vibrating main structure and the cantilevered beam is then added to the SDOF model. The joint characteristics are simulated with a light mass, mj , linear spring stiffness, kj , and equivalent viscous damper, cj . In two scenarios, i.e. with a rigid joint and with a flexible one, a numerical approach is followed to investigate the effects of each nonlinear parameter of the harvester (stiffness, damping and piezoelectric coefficient) on the harvested power. In experimental studies, the influence of a bolted joining technique and a flexible adhesive bonding method on the harvested power is investigated. The results achieved experimentally confirm those obtained numerically, i.e. a stiffer joint leads to a greater power produced by the harvester. In other words, neglecting the joint characteristics will cause the performance (maximum output power and the range of excitation frequency) of the harvester to be overestimated in numerical simulations.

Gaseous mercury fluxes from forest soils in response to forest harvesting intensity: A field manipulation experiment

International Nuclear Information System (INIS)

Mazur, M.; Mitchell, C.P.J.; Eckley, C.S.; Eggert, S.L.; Kolka, R.K.; Sebestyen, S.D.; Swain, E.B.

2014-01-01

is not yet clear for how long such an effect will persist. - Highlights: • We investigated forestry impacts on gaseous Hg flux in a field experiment. • We measured ambient Hg fluxes and fluxes from added enriched Hg isotope tracers. • Biomass harvesting following clearcut had the greatest impact on ambient fluxes. • These impacts were seasonally restricted to the leaf-out growing season. • Isotope results suggest emissions dominated by legacy Hg pools

Magnetic Nanocomposite Cilia Energy Harvester

KAUST Repository

Khan, Mohammed Asadullah; Alfadhel, Ahmed; Kosel, Jü rgen

2016-01-01

An energy harvester capable of converting low frequency vibrations into electrical energy is presented. The operating principle, fabrication process and output characteristics at different frequencies are discussed. The harvester is realized

1970 Oregon timber harvest.

Science.gov (United States)

Brian R. Wall

1971-01-01

The 1970 Oregon timber harvest of 7.98 billion board feet was the lowest recorded since the recession year of 1961 when 7.41 billion board feet of timber was produced. The 1970 log production figure was 12.8 percent below the 1969 harvest, the second consecutive year of declining production in Oregon.

Hairy AdS solitons

International Nuclear Information System (INIS)

Anabalón, Andrés; Astefanesei, Dumitru; Choque, David

2016-01-01

We construct exact hairy AdS soliton solutions in Einstein-dilaton gravity theory. We examine their thermodynamic properties and discuss the role of these solutions for the existence of first order phase transitions for hairy black holes. The negative energy density associated to hairy AdS solitons can be interpreted as the Casimir energy that is generated in the dual filed theory when the fermions are antiperiodic on the compact coordinate.

Hairy AdS solitons

Energy Technology Data Exchange (ETDEWEB)

Anabalón, Andrés, E-mail: andres.anabalon@uai.cl [Departamento de Ciencias, Facultad de Artes Liberales and Facultad de Ingeniería y Ciencias, Universidad Adolfo Ibáñez, Av. Padre Hurtado 750, Viña del Mar (Chile); Astefanesei, Dumitru, E-mail: dumitru.astefanesei@pucv.cl [Instituto de Física, Pontificia Universidad Católica de Valparaíso, Casilla 4059, Valparaíso (Chile); Choque, David, E-mail: brst1010123@gmail.com [Instituto de Física, Pontificia Universidad Católica de Valparaíso, Casilla 4059, Valparaíso (Chile); Universidad Técnica Federico Santa María, Av. España 1680, Valparaíso (Chile)

2016-11-10

We construct exact hairy AdS soliton solutions in Einstein-dilaton gravity theory. We examine their thermodynamic properties and discuss the role of these solutions for the existence of first order phase transitions for hairy black holes. The negative energy density associated to hairy AdS solitons can be interpreted as the Casimir energy that is generated in the dual filed theory when the fermions are antiperiodic on the compact coordinate.

A Hip Implant Energy Harvester

Science.gov (United States)

Pancharoen, K.; Zhu, D.; Beeby, S. P.

2014-11-01

This paper presents a kinetic energy harvester designed to be embedded in a hip implant which aims to operate at a low frequency associated with body motion of patients. The prototype is designed based on the constrained volume available in a hip prosthesis and the challenge is to harvest energy from low frequency movements (< 1 Hz) which is an average frequency during free walking of a patient. The concept of magnetic-force-driven energy harvesting is applied to this prototype considering the hip movements during routine activities of patients. The magnetic field within the harvester was simulated using COMSOL. The simulated resonant frequency was around 30 Hz and the voltage induced in a coil was predicted to be 47.8 mV. A prototype of the energy harvester was fabricated and tested. A maximum open circuit voltage of 39.43 mV was obtained and the resonant frequency of 28 Hz was observed. Moreover, the power output of 0.96 μW was achieved with an optimum resistive load of 250Ω.

A Hip Implant Energy Harvester

International Nuclear Information System (INIS)

Pancharoen, K; Zhu, D; Beeby, S P

2014-01-01

This paper presents a kinetic energy harvester designed to be embedded in a hip implant which aims to operate at a low frequency associated with body motion of patients. The prototype is designed based on the constrained volume available in a hip prosthesis and the challenge is to harvest energy from low frequency movements (< 1 Hz) which is an average frequency during free walking of a patient. The concept of magnetic-force-driven energy harvesting is applied to this prototype considering the hip movements during routine activities of patients. The magnetic field within the harvester was simulated using COMSOL. The simulated resonant frequency was around 30 Hz and the voltage induced in a coil was predicted to be 47.8 mV. A prototype of the energy harvester was fabricated and tested. A maximum open circuit voltage of 39.43 mV was obtained and the resonant frequency of 28 Hz was observed. Moreover, the power output of 0.96 μW was achieved with an optimum resistive load of 250Ω

Approaches to automated protein crystal harvesting

Energy Technology Data Exchange (ETDEWEB)

Deller, Marc C., E-mail: mdeller@scripps.edu; Rupp, Bernhard, E-mail: mdeller@scripps.edu

2014-01-28

Approaches to automated and robot-assisted harvesting of protein crystals are critically reviewed. While no true turn-key solutions for automation of protein crystal harvesting are currently available, systems incorporating advanced robotics and micro-electromechanical systems represent exciting developments with the potential to revolutionize the way in which protein crystals are harvested.

Sustainable harvest of waterbirds: a global review

DEFF Research Database (Denmark)

Kanstrup, Niels

ABSTRACT Waterbirds have a long tradition of being harvested in various ways. In many countries, the harvest takes place as a primary food source, but recreational hunting is also very popular. Various methods are used. Subsistence hunting of waterbirds has a history that dates back to the dawn...... and the degree of stability in local communities obtained through nature conservation. In many countries there is a long tradition of detailed wildlife harvest management including programmes for bag surveys and monitoring of harvest levels. In most countries, however, the management of waterbird harvests...

AdS solutions through transgression

International Nuclear Information System (INIS)

Donos, Aristomenis; Gauntlett, Jerome P.; Kim, Nakwoo

2008-01-01

We present new classes of explicit supersymmetric AdS 3 solutions of type IIB supergravity with non-vanishing five-form flux and AdS 2 solutions of D = 11 supergravity with electric four-form flux. The former are dual to two-dimensional SCFTs with (0,2) supersymmetry and the latter to supersymmetric quantum mechanics with two supercharges. We also investigate more general classes of AdS 3 solutions of type IIB supergravity and AdS 2 solutions of D = 11 supergravity which in addition have non-vanishing three-form flux and magnetic four-form flux, respectively. The construction of these more general solutions makes essential use of the Chern-Simons or 'transgression' terms in the Bianchi identity or the equation of motion of the field strengths in the supergravity theories. We construct infinite new classes of explicit examples and for some of the type IIB solutions determine the central charge of the dual SCFTs. The type IIB solutions with non-vanishing three-form flux that we construct include a two-torus, and after two T-dualities and an S-duality, we obtain new AdS 3 solutions with only the NS fields being non-trivial.

Mechanical harvesting of pumpkin seeds

OpenAIRE

Sito, Stjepan; Ivančan, Stjepan; Barković, Edi; Mucalo, Ana

2009-01-01

One of the key problems in production technology of pumpkin seed for oil production is mechanized harvesting and losses of seed during mechanical harvesting. The losses of pumpkin seed during mechanical harvesting at peripheral velocity of 1.57 m/s (optimally adjusted machine) were 4.4% for Gleisdorf species, 5.2% for Slovenska species and 7.8% for pumpkin with husk. The higher average losses of pumpkin seed with husk were caused by tight connection of seed and pumpkin fruit.

Maple Sugar Harvesting/Wild Rice Harvesting.

Science.gov (United States)

Minneapolis Public Schools, MN.

Comprised of two separate booklets, this resource unit assists elementary teachers in explaining how the Ojibwe people harvest maple sugar and wild rice. The first booklet explains the procedure of tapping the maple trees for sap, preparation for boiling the sap, and the three forms the sugar is made into (granulated, "molded," and…

Autotransplantation donor tooth site harvesting using piezosurgery.

Science.gov (United States)

Ylikontiola, Leena P; Sándor, George K

2016-01-01

The harvesting of a tooth as a candidate for tooth autotransplantation requires that the delicate dental tissues around the tooth be minimally traumatized. This is especially so for the periradicular tissues of the tooth root and the follicular tissues surrounding the crown. The aim of this report is to describe the use of piezosurgery as an attempt at morbidity reduction in the harvesting of teeth for autotransplantation. A piezosurgical handpiece and its selection of tips were easily adapted to allow the harvesting and delivery of teeth for autotransplantation purposes. Twenty premolar teeth were harvested using a piezosurgical device. The harvested teeth were subsequently successfully autotransplanted. All twenty teeth healed in a satisfactory manner without excessive mobility or ankyloses. Piezosurgery avoids some of the traumatic aspects of harvesting teeth and removing bone which are associated with thermal damage from the use of conventional rotary instruments or saws. Piezosurgery can be adapted to facilitate the predictable harvesting of teeth for autotransplantation purposes.

SpectraClassifier 1.0: a user friendly, automated MRS-based classifier-development system

Directory of Open Access Journals (Sweden)

Julià-Sapé Margarida

2010-02-01

Full Text Available Abstract Background SpectraClassifier (SC is a Java solution for designing and implementing Magnetic Resonance Spectroscopy (MRS-based classifiers. The main goal of SC is to allow users with minimum background knowledge of multivariate statistics to perform a fully automated pattern recognition analysis. SC incorporates feature selection (greedy stepwise approach, either forward or backward, and feature extraction (PCA. Fisher Linear Discriminant Analysis is the method of choice for classification. Classifier evaluation is performed through various methods: display of the confusion matrix of the training and testing datasets; K-fold cross-validation, leave-one-out and bootstrapping as well as Receiver Operating Characteristic (ROC curves. Results SC is composed of the following modules: Classifier design, Data exploration, Data visualisation, Classifier evaluation, Reports, and Classifier history. It is able to read low resolution in-vivo MRS (single-voxel and multi-voxel and high resolution tissue MRS (HRMAS, processed with existing tools (jMRUI, INTERPRET, 3DiCSI or TopSpin. In addition, to facilitate exchanging data between applications, a standard format capable of storing all the information needed for a dataset was developed. Each functionality of SC has been specifically validated with real data with the purpose of bug-testing and methods validation. Data from the INTERPRET project was used. Conclusions SC is a user-friendly software designed to fulfil the needs of potential users in the MRS community. It accepts all kinds of pre-processed MRS data types and classifies them semi-automatically, allowing spectroscopists to concentrate on interpretation of results with the use of its visualisation tools.

Ultrasound acoustic wave energy transfer and harvesting

Science.gov (United States)

Shahab, Shima; Leadenham, Stephen; Guillot, François; Sabra, Karim; Erturk, Alper

2014-04-01

This paper investigates low-power electricity generation from ultrasound acoustic wave energy transfer combined with piezoelectric energy harvesting for wireless applications ranging from medical implants to naval sensor systems. The focus is placed on an underwater system that consists of a pulsating source for spherical wave generation and a harvester connected to an external resistive load for quantifying the electrical power output. An analytical electro-acoustic model is developed to relate the source strength to the electrical power output of the harvester located at a specific distance from the source. The model couples the energy harvester dynamics (piezoelectric device and electrical load) with the source strength through the acoustic-structure interaction at the harvester-fluid interface. Case studies are given for a detailed understanding of the coupled system dynamics under various conditions. Specifically the relationship between the electrical power output and system parameters, such as the distance of the harvester from the source, dimensions of the harvester, level of source strength, and electrical load resistance are explored. Sensitivity of the electrical power output to the excitation frequency in the neighborhood of the harvester's underwater resonance frequency is also reported.

Dust emissions eliminated in pneumatic harvesting

International Nuclear Information System (INIS)

Kallio, M.

1998-01-01

Pneumatic harvesting is the most efficient milled peat production method in unsteady weather conditions. In good summers, the best contractors harvest more than 1 000 m 3 /ha milled peat from suitable production fields. The greatest problem of the method is caused by dust emissions, in particular in fields close to settled areas. About 15 % of Finland's present peat production is collected using pneumatic harvesters. A pneumatic harvester with smaller dust emissions has been developed by VTT Energy and Vapo Oy. The wagon is based on two-stage separation of peat. The main part of the coarser milled peat is first separated, e.g. in a settling chamber, and fine dry peat dust in correctly dimensioned side by side cyclones. The first series of pneumatic harvesters based on the new separation technology was employed in summer 1996. Besides decreasing the dust emissions the harvesting capacity of the new equipment was increased. The collection capacity of the pneumatic harvester can be made more effective by enlarging the container size, be decreasing the weight, by increasing the driving speed and by developing the suction capacity. Using lighter and durable construction materials combined with advanced design lighter and stronger pneumatic harvesters have been constructed. Nozzles and their mounting have also been developed. In the improvement of nozzles, the former studies with pneumatic simulator of VTT Energy, have been of great help. Studies with the pneumatic simulator and field conditions have been made in collaboration with Turveruukki Oy, Turvemetalli Oy, Raussin Metalli Oy and Vapo Oy, as well as VNIITP of St. Petersburg, Russia

Dielectric loss against piezoelectric power harvesting

Science.gov (United States)

Liang, Junrui; Shu-Hung Chung, Henry; Liao, Wei-Hsin

2014-09-01

Piezoelectricity is one of the most popular electromechanical transduction mechanisms for constructing kinetic energy harvesting systems. When a standard energy harvesting (SEH) interface circuit, i.e., bridge rectifier plus filter capacitor, is utilized for collecting piezoelectric power, the previous literature showed that the power conversion can be well predicted without much consideration for the effect of dielectric loss. Yet, as the conversion power gets higher by adopting power-boosting interface circuits, such as synchronized switch harvesting on inductor (SSHI), the neglect of dielectric loss might give rise to deviation in harvested power estimation. Given the continuous progress on power-boosting interface circuits, the role of dielectric loss in practical piezoelectric energy harvesting (PEH) systems should receive attention with better evaluation. Based on the integrated equivalent impedance network model, this fast track communication provides a comprehensive study on the susceptibility of harvested power in PEH systems under different conditions. It shows that, dielectric loss always counteracts piezoelectric power harvesting by causing charge leakage across piezoelectric capacitance. In particular, taking corresponding ideal lossless cases as references, the counteractive effect might be aggravated under one of the five conditions: larger dielectric loss tangent, lower vibration frequency, further away from resonance, weaker electromechanical coupling, or using power-boosting interface circuit. These relationships are valuable for the study of PEH systems, as they not only help explain the role of dielectric loss in piezoelectric power harvesting, but also add complementary insights for material, structure, excitation, and circuit considerations towards holistic evaluation and design for practical PEH systems.

Dielectric loss against piezoelectric power harvesting

International Nuclear Information System (INIS)

Liang, Junrui; Shu-Hung Chung, Henry; Liao, Wei-Hsin

2014-01-01

Piezoelectricity is one of the most popular electromechanical transduction mechanisms for constructing kinetic energy harvesting systems. When a standard energy harvesting (SEH) interface circuit, i.e., bridge rectifier plus filter capacitor, is utilized for collecting piezoelectric power, the previous literature showed that the power conversion can be well predicted without much consideration for the effect of dielectric loss. Yet, as the conversion power gets higher by adopting power-boosting interface circuits, such as synchronized switch harvesting on inductor (SSHI), the neglect of dielectric loss might give rise to deviation in harvested power estimation. Given the continuous progress on power-boosting interface circuits, the role of dielectric loss in practical piezoelectric energy harvesting (PEH) systems should receive attention with better evaluation. Based on the integrated equivalent impedance network model, this fast track communication provides a comprehensive study on the susceptibility of harvested power in PEH systems under different conditions. It shows that, dielectric loss always counteracts piezoelectric power harvesting by causing charge leakage across piezoelectric capacitance. In particular, taking corresponding ideal lossless cases as references, the counteractive effect might be aggravated under one of the five conditions: larger dielectric loss tangent, lower vibration frequency, further away from resonance, weaker electromechanical coupling, or using power-boosting interface circuit. These relationships are valuable for the study of PEH systems, as they not only help explain the role of dielectric loss in piezoelectric power harvesting, but also add complementary insights for material, structure, excitation, and circuit considerations towards holistic evaluation and design for practical PEH systems. (fast track communications)

March-June temperature reconstruction in the Czech Lands based on cereal harvest dates in the 1501-2008 period

Science.gov (United States)

Brázdil, Rudolf; Možný, Martin; Dobrovolný, Petr; Trnka, Mirek

2010-05-01

Cereal crop harvests reflect the weather patterns of the period immediately preceding them, and thus the dates at which they begin may be used as a source of proxy data on regional climate. Using systematic phenological observations in the Czech Lands (now known as the Czech Republic) after 1848, together with exploration of further surviving documentary evidence (chronicles, diaries, financial accounts etc.), it has proved possible to create series of winter wheat harvest dates for the period 1501-2008. Employing linear regression, the harvesting dates of the main cereal species (wheat, rye, barley, oats) were first converted to winter wheat harvest days and then normalised to the same altitude above sea level. The next step consisted of using series of winter wheat harvest dates to reconstruct mean March-June temperatures in the Czech Lands, applying standard palaeoclimatological methods. Series reconstructed by linear regression explain 70% of temperature variability. A profound cold period corresponding with late winter wheat harvests was noted between 1659 and 1705. In contrast, warm periods (i.e. early winter wheat harvests) were found for the periods of 1517-1542, 1788-1834 and 1946-2008. The period after 1951 is the warmest of all throughout the entire 1501-2008 period. Comparisons with other European temperature reconstructions derived from documentary sources (including grape harvest dates), tree-ring and instrumental data reveal generally close agreement, with significant correlations. Lower correlations around A.D. 1650 and 1750 may be partly related to deterioration of socio-economic conditions in the Czech Lands resulting from prolonged wars. The results obtained demonstrate that it is possible to use widely-available cereal harvest data for climate analysis and also that such data constitute an independent proxy data series for the region of Central Europe crucial to further studies of the potential impact of climatic variability and climate change

The effects of harvest on waterfowl populations

Science.gov (United States)

Cooch, Evan G.; Guillemain, Matthieu; Boomer, G Scott; Lebreton, Jean-Dominique; Nichols, James D.

2014-01-01

Change in the size of populations over space and time is, arguably, the motivation for much of pure and applied ecological research. The fundamental model for the dynamics of any population is straightforward: the net change in the abundance is the simple difference between the number of individuals entering the population and the number leaving the population, either or both of which may change in response to factors intrinsic and extrinsic to the population. While harvest of individuals from a population constitutes a clear extrinsic source of removal of individuals, the response of populations to harvest is frequently complex, reflecting an interaction of harvest with one or more population processes. Here we consider the role of these interactions, and factors influencing them, on the effective harvest management of waterfowl populations. We review historical ideas concerning harvest and discuss the relationship(s) between waterfowl life histories and the development and application of population models to inform harvest management. The influence of population structure (age, spatial) on derivation of optimal harvest strategies (with and without explicit consideration of various sources of uncertainty) is considered. In addition to population structure, we discuss how the optimal harvest strategy may be influenced by: 1) patterns of density-dependence in one or more vital rates, and 2) heterogeneity in vital rates among individuals within an age-sex-size class. Although derivation of the optimal harvest strategy for simple population models (with or without structure) is generally straightforward, there are several potential difficulties in application. In particular, uncertainty concerning the population structure at the time of harvest, and the ability to regulate the structure of the harvest itself, are significant complications. We therefore review the evidence of effects of harvest on waterfowl populations. Some of this evidence has

Energy harvesting with Di-Electro Active Polymers

DEFF Research Database (Denmark)

Due, Jens; Munk-Nielsen, Stig; Nielsen, Rasmus Ørndrup

2010-01-01

This article presents a way of using Di-Electro Active Polymers (D-EAPs) for harvesting mechanical energy sources. The article describes the basics of energy harvesting with D-EAPs, and an electrical model of a D-EAP is suggested. This leads to a converter design which is able to extract...... the electrical energy harvested by the D-EAP. This converter is simulated and realized. Through experimental results both the model of the DEAP and the converter are verified. It is found that it is possible to harvest energy with a D-EAP and build a converter that can extract the harvested energy....

Chemical composition and methane yield of reed canary grass as influenced by harvesting time and harvest frequency.

Science.gov (United States)

Kandel, Tanka P; Sutaryo, Sutaryo; Møller, Henrik B; Jørgensen, Uffe; Lærke, Poul E

2013-02-01

This study examined the influence of harvest time on biomass yield, dry matter partitioning, biochemical composition and biological methane potential of reed canary grass harvested twice a month in one-cut (OC) management. The regrowth of biomass harvested in summer was also harvested in autumn as a two-cut management with (TC-F) or without (TC-U) fertilization after summer harvest. The specific methane yields decreased significantly with crop maturity that ranged from 384 to 315 and from 412 to 283 NL (normal litre) (kgVS)(-1) for leaf and stem, respectively. Approximately 45% more methane was produced by the TC-F management (5430Nm(3)ha(-1)) as by the OC management (3735Nm(3)ha(-1)). Specific methane yield was moderately correlated with the concentrations of fibre components in the biomass. Larger quantity of biogas produced at the beginning of the biogas assay from early harvested biomass was to some extent off-set by lower concentration of methane. Copyright © 2012 Elsevier Ltd. All rights reserved.

Bundling harvester; Harvennuspuun automaattisen nippukorjausharvesterin kehittaeminen

Energy Technology Data Exchange (ETDEWEB)

Koponen, K [Eko-Log Oy, Kuopio (Finland)

1997-12-01

The starting point of the project was to design and construct, by taking the silvicultural point of view into account, a harvesting and processing system especially for energy-wood, containing manually driven bundling harvester, automating of the harvester, and automated loading. The equipment forms an ideal method for entrepreneur`s-line harvesting. The target is to apply the system also for owner`s-line harvesting. The profitability of the system promotes the utilisation of the system in both cases. The objectives of the project were: to construct a test equipment and prototypes for all the project stages, to carry out terrain and strain tests in order to examine the usability and durability, as well as the capacity of the machine, to test the applicability of the Eko-Log system in simultaneous harvesting of energy and pulp woods, and to start the marketing and manufacturing of the products. The basic problems of the construction of the bundling harvester have been solved using terrain-tests. The prototype machine has been shown to be operable. Loading of the bundles to form sufficiently economically transportable loads has been studied, and simultaneously, the branch-biomass has been tried to be utilised without loosing the profitability of transportation. The results have been promising, and will promote the profitable utilisation of wood-energy. (orig.)

Electromagnetic energy harvester for harvesting acoustic energy

Indian Academy of Sciences (India)

Farid U Khan

Acoustics; energy harvesting; electromagnetic; Helmholtz resonator; sound pressure level; suspended coil. ... WSNs, which are supposed to operate for longer period of time. However ... several ambient energies such as wind, thermal, vibration, and solar are ..... textile plants in Northern India with specific reference to noise.

A self-powered piezoelectric energy harvesting interface circuit with efficiency-enhanced P-SSHI rectifier

Science.gov (United States)

Liu, Lianxi; Pang, Yanbo; Yuan, Wenzhi; Zhu, Zhangming; Yang, Yintang

2018-04-01

The key to self-powered technique is initiative to harvest energy from the surrounding environment. Harvesting energy from an ambient vibration source utilizing piezoelectrics emerged as a popular method. Efficient interface circuits become the main limitations of existing energy harvesting techniques. In this paper, an interface circuit for piezoelectric energy harvesting is presented. An active full bridge rectifier is adopted to improve the power efficiency by reducing the conduction loss on the rectifying path. A parallel synchronized switch harvesting on inductor (P-SSHI) technique is used to improve the power extraction capability from piezoelectric harvester, thereby trying to reach the theoretical maximum output power. An intermittent power management unit (IPMU) and an output capacitor-less low drop regulator (LDO) are also introduced. Active diodes (AD) instead of traditional passive ones are used to reduce the voltage loss over the rectifier, which results in a good power efficiency. The IPMU with hysteresis comparator ensures the interface circuit has a large transient output power by limiting the output voltage ranges from 2.2 to 2 V. The design is fabricated in a SMIC 0.18 μm CMOS technology. Simulation results show that the flipping efficiency of the P-SSHI circuit is over 80% with an off-chip inductor value of 820 μH. The output power the proposed rectifier can obtain is 44.4 μW, which is 6.7× improvement compared to the maximum output power of a traditional rectifier. Both the active diodes and the P-SSHI help to improve the output power of the proposed rectifier. LDO outputs a voltage of 1.8 V with the maximum 90% power efficiency. The proposed P-SSHI rectifier interface circuit can be self-powered without the need for additional power supply. Project supported by the National Natural Science Foundation of China (Nos. 61574103, U1709218) and the Key Research and Development Program of Shaanxi Province (No. 2017ZDXM-GY-006).

Quantum ensembles of quantum classifiers.

Science.gov (United States)

Schuld, Maria; Petruccione, Francesco

2018-02-09

Quantum machine learning witnesses an increasing amount of quantum algorithms for data-driven decision making, a problem with potential applications ranging from automated image recognition to medical diagnosis. Many of those algorithms are implementations of quantum classifiers, or models for the classification of data inputs with a quantum computer. Following the success of collective decision making with ensembles in classical machine learning, this paper introduces the concept of quantum ensembles of quantum classifiers. Creating the ensemble corresponds to a state preparation routine, after which the quantum classifiers are evaluated in parallel and their combined decision is accessed by a single-qubit measurement. This framework naturally allows for exponentially large ensembles in which - similar to Bayesian learning - the individual classifiers do not have to be trained. As an example, we analyse an exponentially large quantum ensemble in which each classifier is weighed according to its performance in classifying the training data, leading to new results for quantum as well as classical machine learning.

Energy harvesting for self-powered aerostructure actuation

Science.gov (United States)

Bryant, Matthew; Pizzonia, Matthew; Mehallow, Michael; Garcia, Ephrahim

2014-04-01

This paper proposes and experimentally investigates applying piezoelectric energy harvesting devices driven by flow induced vibrations to create self-powered actuation of aerostructure surfaces such as tabs, flaps, spoilers, or morphing devices. Recently, we have investigated flow-induced vibrations and limit cycle oscillations due to aeroelastic flutter phenomena in piezoelectric structures as a mechanism to harvest energy from an ambient fluid flow. We will describe how our experimental investigations in a wind tunnel have demonstrated that this harvested energy can be stored and used on-demand to actuate a control surface such as a trailing edge flap in the airflow. This actuated control surface could take the form of a separate and discrete actuated flap, or could constitute rotating or deflecting the oscillating energy harvester itself to produce a non-zero mean angle of attack. Such a rotation of the energy harvester and the associated change in aerodynamic force is shown to influence the operating wind speed range of the device, its limit cycle oscillation (LCO) amplitude, and its harvested power output; hence creating a coupling between the device's performance as an energy harvester and as a control surface. Finally, the induced changes in the lift, pitching moment, and drag acting on a wing model are quantified and compared for a control surface equipped with an oscillating energy harvester and a traditional, static control surface of the same geometry. The results show that when operated in small amplitude LCO the energy harvester adds negligible aerodynamic drag.

Piezoelectric energy harvesting with parametric uncertainty

International Nuclear Information System (INIS)

Ali, S F; Friswell, M I; Adhikari, S

2010-01-01

The design and analysis of energy harvesting devices is becoming increasing important in recent years. Most of the literature has focused on the deterministic analysis of these systems and the problem of uncertain parameters has received less attention. Energy harvesting devices exhibit parametric uncertainty due to errors in measurement, errors in modelling and variability in the parameters during manufacture. This paper investigates the effect of parametric uncertainty in the mechanical system on the harvested power, and derives approximate explicit formulae for the optimal electrical parameters that maximize the mean harvested power. The maximum of the mean harvested power decreases with increasing uncertainty, and the optimal frequency at which the maximum mean power occurs shifts. The effect of the parameter variance on the optimal electrical time constant and optimal coupling coefficient are reported. Monte Carlo based simulation results are used to further analyse the system under parametric uncertainty

Waste energy harvesting mechanical and thermal energies

CERN Document Server

Ling Bing, Kong; Hng, Huey Hoon; Boey, Freddy; Zhang, Tianshu

2014-01-01

Waste Energy Harvesting overviews the latest progress in waste energy harvesting technologies, with specific focusing on waste thermal mechanical energies. Thermal energy harvesting technologies include thermoelectric effect, storage through phase change materials and pyroelectric effect. Waste mechanical energy harvesting technologies include piezoelectric (ferroelectric) effect with ferroelectric materials and nanogenerators. The book aims to strengthen the syllabus in energy, materials and physics and is well suitable for students and professionals in the fields.

Warped AdS3 black holes

International Nuclear Information System (INIS)

Anninos, Dionysios; Li Wei; Padi, Megha; Song Wei; Strominger, Andrew

2009-01-01

Three dimensional topologically massive gravity (TMG) with a negative cosmological constant -l -2 and positive Newton constant G admits an AdS 3 vacuum solution for any value of the graviton mass μ. These are all known to be perturbatively unstable except at the recently explored chiral point μl = 1. However we show herein that for every value of μl ≠ 3 there are two other (potentially stable) vacuum solutions given by SL(2,R) x U(1)-invariant warped AdS 3 geometries, with a timelike or spacelike U(1) isometry. Critical behavior occurs at μl = 3, where the warping transitions from a stretching to a squashing, and there are a pair of warped solutions with a null U(1) isometry. For μl > 3, there are known warped black hole solutions which are asymptotic to warped AdS 3 . We show that these black holes are discrete quotients of warped AdS 3 just as BTZ black holes are discrete quotients of ordinary AdS 3 . Moreover new solutions of this type, relevant to any theory with warped AdS 3 solutions, are exhibited. Finally we note that the black hole thermodynamics is consistent with the hypothesis that, for μl > 3, the warped AdS 3 ground state of TMG is holographically dual to a 2D boundary CFT with central charges c R -formula and c L -formula.

Renewal of Collaborative Research: Economically Viable Forest Harvesting Practices That Increase Carbon Sequestration

Energy Technology Data Exchange (ETDEWEB)

Davidson, E.A.; Dail, D.B., Hollinger, D.; Scott, N.; Richardson, A.

2012-08-02

Forests provide wildlife habitat, water and air purification, climate moderation, and timber and nontimber products. Concern about climate change has put forests in the limelight as sinks of atmospheric carbon. The C stored in the global vegetation, mostly in forests, is nearly equivalent to the amount present in atmospheric CO{sub 2}. Both voluntary and government-mandated carbon trading markets are being developed and debated, some of which include C sequestration resulting from forest management as a possible tradeable commodity. However, uncertainties regarding sources of variation in sequestration rates, validation, and leakage remain significant challenges for devising strategies to include forest management in C markets. Hence, the need for scientifically-based information on C sequestration by forest management has never been greater. The consequences of forest management on the US carbon budget are large, because about two-thirds of the {approx}300 million hectare US forest resource is classified as 'commercial forest.' In most C accounting budgets, forest harvesting is usually considered to cause a net release of C from the terrestrial biosphere to the atmosphere. However, forest management practices could be designed to meet the multiple goals of providing wood and paper products, creating economic returns from natural resources, while sequestering C from the atmosphere. The shelterwood harvest strategy, which removes about 30% of the basal area of the overstory trees in each of three successive harvests spread out over thirty years as part of a stand rotation of 60-100 years, may improve net C sequestration compared to clear-cutting because: (1) the average C stored on the land surface over a rotation increases, (2) harvesting only overstory trees means that a larger fraction of the harvested logs can be used for long-lived sawtimber products, compared to more pulp resulting from clearcutting, (3) the shelterwood cut encourages growth of

Magnetic Nanocomposite Cilia Energy Harvester

KAUST Repository

Khan, Mohammed Asadullah

2016-02-11

An energy harvester capable of converting low frequency vibrations into electrical energy is presented. The operating principle, fabrication process and output characteristics at different frequencies are discussed. The harvester is realized by fabricating an array of polydimethylsiloxane (PDMS) - iron nanowire nanocomposite cilia on a planar coil array. Each coil element consists of 14 turns and occupies an area of 600 μm x 600μm. The cilia are arranged in a 12x5 array and each cilium is 250 μm wide and 2 mm long. The magnetic characteristics of the fabricated cilia indicate that the nanowires are well aligned inside of the nanocomposite, increasing the efficiency of energy harvesting. The energy harvester occupies an area of 66.96 mm2 and produces an output r.m.s voltage of 206.47μV, when excited by a 40 Hz vibration of 1 mm amplitude.

Hawking radiation from AdS black holes

International Nuclear Information System (INIS)

Hubeny, Veronika E; Rangamani, Mukund; Marolf, Donald

2010-01-01

We study Hartle-Hawking-like states of quantum field theories on asymptotically AdS black hole backgrounds, with particular regard to the phase structure of interacting theories. By a suitable analytic continuation we show that the equilibrium dynamics of field theories on large asymptotically AdS black holes can be related to the low-temperature states of the same field theory on the AdS soliton (or pure AdS) background. This allows us to gain insight into Hartle-Hawking-like states on large-radius Schwarzschild- or rotating-AdS black holes. Furthermore, we exploit the AdS/CFT correspondence to explore the physics of strongly coupled large N theories on asymptotically AdS black holes. In particular, we exhibit a plausibly complete set of phases for the M2-brane world-volume superconformal field theory on a BTZ black hole background. Our analysis partially resolves puzzles previously raised in connection with Hawking radiation on large AdS black holes.

Characterization of Piezoelectric Energy Harvesting MEMS

Science.gov (United States)

2015-12-01

of previously fabricated MEMS piezoelectric energy harvesters and use the results to optimize an advanced finite element model to be used in...possibilities of using solar power and the piezoelectric effect to harvest energy [12]. The design goal was to develop an energy harvester with a resonant... The piezoelectric properties of AlN are also relatively constant over a wide range of temperatures [7]. AlN was further characterized

Polarised Black Holes in AdS

CERN Document Server

Costa, Miguel S.; Oliveira, Miguel; Penedones, João; Santos, Jorge E.

2016-05-03

We consider solutions in Einstein-Maxwell theory with a negative cosmological constant that asymptote to global $AdS_{4}$ with conformal boundary $S^{2}\\times\\mathbb{R}_{t}$. At the sphere at infinity we turn on a space-dependent electrostatic potential, which does not destroy the asymptotic $AdS$ behaviour. For simplicity we focus on the case of a dipolar electrostatic potential. We find two new geometries: (i) an $AdS$ soliton that includes the full backreaction of the electric field on the $AdS$ geometry; (ii) a polarised neutral black hole that is deformed by the electric field, accumulating opposite charges in each hemisphere. For both geometries we study boundary data such as the charge density and the stress tensor. For the black hole we also study the horizon charge density and area, and further verify a Smarr formula. Then we consider this system at finite temperature and compute the Gibbs free energy for both $AdS$ soliton and black hole phases. The corresponding phase diagram generalizes the Hawkin...

Effects of Successive Harvests on Soil Nutrient Stocks in Established Tropical Plantation Forests

Science.gov (United States)

Mendoza, L.; McMahon, D.; Jackson, R. B.

2017-12-01

Large-scale plantation forests in tropical regions alter biogeochemical processes, raising concerns about the long-term sustainability of this land use. Current commercial practices result in nutrient export with removed biomass that may not be balanced by fertilizer application. Consequent changes in a landscape's nutrient distributions can affect the growth of future plantations or other vegetation. Prior studies have reported changes in soil chemical and physical properties when plantation forests replace pastures or native vegetation, but few have examined the impacts of multiple harvest cycles following plantation establishment. This study analyzed macronutrient and carbon content of soil samples from the world's most productive plantation forests, in southeastern Brazil, to understand the long-term effects of plantation forests on soil nutrient stocks and soil fertility. Soil was collected from Eucalyptus plantation sites and adjacent vegetation in 2004 and again in 2016, after at least one full cycle of harvesting and replanting. We found that within surface soil (0-10 cm) Mg and N did not change significantly and C, P, K and Ca concentrations generally increased, but to varying extents within individual management units. This trend of increasing nutrient concentrations suggests that additional harvests do not result in cumulative nutrient depletion. However, large changes in Ca and K concentrations in individual plantation units indicate that added fertilizer does not consistently accumulate in the surface soil. Analysis of deeper soil layers and comparison to unfertilized vegetation will help to determine the fate of fertilizers and native soil nutrients in repeatedly harvested plantations. These results address the necessity of long-term investigation of nutrient changes to better understand and determine the impacts of different types of land use in the tropics.

Power harvesting in helicopter rotorblades

NARCIS (Netherlands)

de Jong, Pieter; de Boer, Andries; Loendersloot, Richard; van der Hoogt, Peter

2010-01-01

Current power harvesting research has focused on bending beams and determining power output under a given excitation. For the European CleanSky – Green Rotor Craft project a tool is being developed which optimizes the piezoelectric material and placement thereof for power harvesting. It focuses on

Risk factors of musculoskeletal disorders among oil palm fruit harvesters during early harvesting stage

Directory of Open Access Journals (Sweden)

Yee Guan Ng

2015-05-01

Full Text Available This cross-sectional study intends to investigate the associations of musculoskeletal disorders (MSDs among foreign labourers on a socio-economic background, occupational exposure, social lifestyle, and postures adopted during harvesting tasks. A total of 446 male respondents (263 FFB cutters; 183 FFB collectors were studied using an interview-assisted questionnaire. OWAS was used to determine the severity of awkward posture based on videos of harvesting tasks recorded for each respondent. Analysis found that increasingly educated respondents had higher risk of developing MSDs. Shorter daily work duration and longer resting duration appear to increase the risk of neck and shoulder disorders among harvesters, which may be attributable to organizational work design. Awkward posture was a particularly significant risk factor of MSDs among FFB collectors. Among the results of the study, occupational exposure, postures and certain socio-demographic backgrounds explained some, but not all, the risk factor of MSDs among harvesters. An in-depth investigation, preferably a longitudinal study investigating the dynamic of work activities and other risk factors, such as psychosocial risk factors, are recommended.

Remaining questions in the case for balanced harvesting

DEFF Research Database (Denmark)

Burgess, Matthew G; Diekert, Florian K; Jacobsen, Nis Sand

2016-01-01

are controversial, including its call for extensive harvesting of juveniles and forage fish. Balanced harvesting also calls for targeting species and size-classes that are not currently marketable, possibly at a significant economic cost. Some have argued that this cost is outweighed by the ecological benefits......Balanced harvesting – harvesting all species and sizes in an ecosystem in proportion to their productivity – is a fisheries management strategy that has been suggested recently to increase yields, while reducing overall ecosystem impact. However, some aspects of balanced harvesting...

Smart multi-application energy harvester using Arduino | Rizman ...

African Journals Online (AJOL)

This paper presents a Smart Multi-App Harvester Energy Using Arduino for energy harvesting. The system consists of a few mechanical parts such as solar, thermal plate and dynamo (for kinetic) to harvest the energy. The objectives of the project are to harvest the wasted energy from the mechanical parts and used it as a ...

Do biomass harvesting guidelines influence herpetofauna following harvests of logging residues for renewable energy?.

Science.gov (United States)

Fritts, Sarah; Moorman, Christopher; Grodsky, Steven; Hazel, Dennis; Homyack, Jessica; Farrell, Chris; Castleberry, Steven

2016-04-01

Forests are a major supplier of renewable energy; however, gleaning logging residues for use as woody biomass feedstock could negatively alter habitat for species dependent on downed wood. Biomass Harvesting Guidelines (BHGs) recommend retaining a portion of woody biomass on the forest floor following harvest. Despite BHGs being developed to help ensure ecological sustainability, their contribution to biodiversity has not been evaluated experimentally at operational scales. We compared herpetofauanal evenness, diversity, and richness and abundance of Anaxyrus terrestris and Gastrophryne carolinensis among six treatments that varied in volume and spatial arrangement of woody biomass retained after clearcutting loblolly pine (Pinus taeda) plantations in North Carolina, USA (n = 4), 2011-2014 and Georgia (n = 4), USA 2011-2013. Treatments were: (1) biomass harvest with no BHGs, (2) 15% retention with biomass clustered, (3) 15% retention with biomass dispersed, (4) 30% retention with biomass clustered, (5) 30% retention with biomass dispersed, and (6) no biomass harvest. We captured individuals with drift fence arrays and compared evenness, diversity, and richness metrics among treatments with repeated-measure, linear mixed-effects models. We determined predictors of A. terrestris and G. carolinensis abundances using a priori candidate N-mixture models with woody biomass volume, vegetation structure, and groundcover composition as covariates. We had 206 captures of 25 reptile species and 8710 captures of 17 amphibian species during 53690 trap nights. Herpetofauna diversity, evenness, and richness were similar among treatments. A. terrestris abundance was negatively related to volume of retained woody biomass in treatment units in North Carolina in 2013. G. carolinensis abundance was positively related with volume of retained woody debris in treatment units in Georgia in 2012. Other relationships between A. terrestris and G. carolinensis abundances and habitat metrics

Water harvest via dewing.

Science.gov (United States)

Lee, Anna; Moon, Myoung-Woon; Lim, Hyuneui; Kim, Wan-Doo; Kim, Ho-Young

2012-07-10

Harvesting water from humid air via dewing can provide a viable solution to a water shortage problem where liquid-phase water is not available. Here we experimentally quantify the effects of wettability and geometry of the condensation substrate on the water harvest efficiency. Uniformly hydrophilic surfaces are found to exhibit higher rates of water condensation and collection than surfaces with lower wettability. This is in contrast to a fog basking method where the most efficient surface consists of hydrophilic islands surrounded by hydrophobic background. A thin drainage path in the lower portion of the condensation substrate is revealed to greatly enhance the water collection efficiency. The optimal surface conditions found in this work can be used to design a practical device that harvests water as its biological counterpart, a green tree frog, Litoria caerulea , does during the dry season in tropical northern Australia.

Population and harvest trends of big game and small game species: a technical document supporting the USDA Forest Service Interim Update of the 2000 RPA Assessment

Science.gov (United States)

Curtis H. Flather; Michael S. Knowles; Stephen J. Brady

2009-01-01

This technical document supports the Forest Service's requirement to assess the status of renewable natural resources as mandated by the Forest and Rangeland Renewable Resources Planning Act of 1974 (RPA). It updates past reports on national and regional trends in population and harvest estimates for species classified as big game and small game. The trends...

Harvesting systems for the northern forest hardwoods

Science.gov (United States)

Chris B. LeDoux

2011-01-01

This monograph is a summary of research results and environmental compliance measures for timber harvesting operations. Data are presented from the Northern Research Station's forest inventory and analysis of 20 states in the northern forest hardwoods. Harvesting systems available in the region today are summarized. Equations for estimating harvesting costs are...

A Comparison of Physiological Signal Analysis Techniques and Classifiers for Automatic Emotional Evaluation of Audiovisual Contents.

Science.gov (United States)

Colomer Granero, Adrián; Fuentes-Hurtado, Félix; Naranjo Ornedo, Valery; Guixeres Provinciale, Jaime; Ausín, Jose M; Alcañiz Raya, Mariano

2016-01-01

This work focuses on finding the most discriminatory or representative features that allow to classify commercials according to negative, neutral and positive effectiveness based on the Ace Score index. For this purpose, an experiment involving forty-seven participants was carried out. In this experiment electroencephalography (EEG), electrocardiography (ECG), Galvanic Skin Response (GSR) and respiration data were acquired while subjects were watching a 30-min audiovisual content. This content was composed by a submarine documentary and nine commercials (one of them the ad under evaluation). After the signal pre-processing, four sets of features were extracted from the physiological signals using different state-of-the-art metrics. These features computed in time and frequency domains are the inputs to several basic and advanced classifiers. An average of 89.76% of the instances was correctly classified according to the Ace Score index. The best results were obtained by a classifier consisting of a combination between AdaBoost and Random Forest with automatic selection of features. The selected features were those extracted from GSR and HRV signals. These results are promising in the audiovisual content evaluation field by means of physiological signal processing.

High-efficiency integrated piezoelectric energy harvesting systems

Science.gov (United States)

Hande, Abhiman; Shah, Pradeep

2010-04-01

This paper describes hierarchically architectured development of an energy harvesting (EH) system that consists of micro and/or macro-scale harvesters matched to multiple components of remote wireless sensor and communication nodes. The micro-scale harvesters consist of thin-film MEMS piezoelectric cantilever arrays and power generation modules in IC-like form to allow efficient EH from vibrations. The design uses new high conversion efficiency thin-film processes combined with novel cantilever structures tuned to multiple resonant frequencies as broadband arrays. The macro-scale harvesters are used to power the collector nodes that have higher power specifications. These bulk harvesters can be integrated with efficient adaptive power management circuits that match transducer impedance and maximize power harvested from multiple scavenging sources with very low intrinsic power consumption. Texas MicroPower, Inc. is developing process based on a composition that has the highest reported energy density as compared to other commercially available bulk PZT-based sensor/actuator ceramic materials and extending it to thin-film materials and miniature conversion transducer structures. The multiform factor harvesters can be deployed for several military and commercial applications such as underground unattended sensors, sensors in oil rigs, structural health monitoring, supply chain management, and battlefield applications such as sensors on soldier apparel, equipment, and wearable electronics.

Optical Sensing of Weed Infestations at Harvest.

Science.gov (United States)

Barroso, Judit; McCallum, John; Long, Dan

2017-10-19

Kochia ( Kochia scoparia L.), Russian thistle ( Salsola tragus L.), and prickly lettuce ( Lactuca serriola L.) are economically important weeds infesting dryland wheat ( Triticum aestivum L.) production systems in the western United States. Those weeds produce most of their seeds post-harvest. The objectives of this study were to determine the ability of an optical sensor, installed for on-the-go measurement of grain protein concentration, to detect the presence of green plant matter in flowing grain and assess the potential usefulness of this information for mapping weeds at harvest. Spectra of the grain stream were recorded continuously at a rate of 0.33 Hz during harvest of two spring wheat fields of 1.9 and 5.4 ha. All readings were georeferenced using a Global Positioning System (GPS) receiver with 1 m positional accuracy. Chlorophyll of green plant matter was detectable in the red (638-710 nm) waveband. Maps of the chlorophyll signal from both fields showed an overall agreement of 78.1% with reference maps, one constructed prior to harvest and the other at harvest time, both based on visual evaluations of the three green weed species conducted by experts. Information on weed distributions at harvest may be useful for controlling post-harvest using variable rate technology for herbicide applications.

On square-wave-driven stochastic resonance for energy harvesting in a bistable system

Energy Technology Data Exchange (ETDEWEB)

Su, Dongxu, E-mail: sudx@iis.u-tokyo.ac.jp [Graduate School of Engineering, The University of Tokyo, Tokyo 1538505 (Japan); Zheng, Rencheng; Nakano, Kimihiko [Institute of Industrial Science, The University of Tokyo, Tokyo 1538505 (Japan); Cartmell, Matthew P [Department of Mechanical Engineering, University of Sheffield, Sheffield S1 3JD (United Kingdom)

2014-11-15

Stochastic resonance is a physical phenomenon through which the throughput of energy within an oscillator excited by a stochastic source can be boosted by adding a small modulating excitation. This study investigates the feasibility of implementing square-wave-driven stochastic resonance to enhance energy harvesting. The motivating hypothesis was that such stochastic resonance can be efficiently realized in a bistable mechanism. However, the condition for the occurrence of stochastic resonance is conventionally defined by the Kramers rate. This definition is inadequate because of the necessity and difficulty in estimating white noise density. A bistable mechanism has been designed using an explicit analytical model which implies a new approach for achieving stochastic resonance in the paper. Experimental tests confirm that the addition of a small-scale force to the bistable system excited by a random signal apparently leads to a corresponding amplification of the response that we now term square-wave-driven stochastic resonance. The study therefore indicates that this approach may be a promising way to improve the performance of an energy harvester under certain forms of random excitation.

On square-wave-driven stochastic resonance for energy harvesting in a bistable system

International Nuclear Information System (INIS)

Su, Dongxu; Zheng, Rencheng; Nakano, Kimihiko; Cartmell, Matthew P

2014-01-01

Stochastic resonance is a physical phenomenon through which the throughput of energy within an oscillator excited by a stochastic source can be boosted by adding a small modulating excitation. This study investigates the feasibility of implementing square-wave-driven stochastic resonance to enhance energy harvesting. The motivating hypothesis was that such stochastic resonance can be efficiently realized in a bistable mechanism. However, the condition for the occurrence of stochastic resonance is conventionally defined by the Kramers rate. This definition is inadequate because of the necessity and difficulty in estimating white noise density. A bistable mechanism has been designed using an explicit analytical model which implies a new approach for achieving stochastic resonance in the paper. Experimental tests confirm that the addition of a small-scale force to the bistable system excited by a random signal apparently leads to a corresponding amplification of the response that we now term square-wave-driven stochastic resonance. The study therefore indicates that this approach may be a promising way to improve the performance of an energy harvester under certain forms of random excitation

Improving Vibration Energy Harvesting Using Dynamic Magnifier

Directory of Open Access Journals (Sweden)

Almuatasim Alomari

2016-01-01

Full Text Available This paper reports on the design and evaluation of vibration-based piezoelectric energy-harvesting devices based on a polyvinylidene fluoride unimorph cantilever beam attached to the front of a dynamic magnifier. Experimental studies of the electromechanical frequency response functions are studied for the first three resonance frequencies. An analytical analysis is undertaken by applying the chain matrix in order to predict output voltage and output power with respect to the vibration frequency. The proposed harvester was modeled using MATLAB software and COMSOL multi- physics to study the mode shapes and electrical output parameters. The voltage and power output of the energy harvester with a dynamic magnifier was 2.62 V and 13.68 mW, respectively at the resonance frequency of the second mode. The modeling approach provides a basis to design energy harvesters exploiting dynamic magnification for improved performance and bandwidth. The potential application of such energy harvesting devices in the transport sector include autonomous structural health monitoring systems that often include embedded sensors, data acquisition, wireless communication, and energy harvesting systems.

String Theory on AdS Spaces

NARCIS (Netherlands)

de Boer, J.

2000-01-01

In these notes we discuss various aspects of string theory in AdS spaces. We briefly review the formulation in terms of Green-Schwarz, NSR, and Berkovits variables, as well as the construction of exact conformal field theories with AdS backgrounds. Based on lectures given at the Kyoto YITP Workshop

The Effect of Plant Cultivar, Growth Media, Harvest Method and Post Harvest Treatment on the Microbiology of Edible Crops

Science.gov (United States)

Hummerick, Mary P.; Gates, Justin R.; Nguyen, Bao-Thang; Massa, Gioia D.; Wheeler, Raymond M.

2011-01-01

Systems for the growth of crops in closed environments are being developed and tested for potential use in space applications to provide a source of fresh food. Plant growth conditions, growth media composition and harvest methods can have an effect on the microbial population of the plant, and therefore should be considered along with the optimization of plant growth and harvest yields to ensure a safe and palatable food crop. This work examines the effect of plant cultivar, growth media, and harvest method on plant microbial populations. Twelve varieties of leafy greens and herbs were grown on a mixture of Fafard #2 and Arcillite in the pillow root containment system currently being considered for the VEGGIE plant growth unit developed by Orbitec. In addition, ,Sierra and Outredgeous lettuce varieties were grown in three different mixtures (Fafard #2, Ardllite, and Perlite/Vermiculite). The plants were analyzed for microbial density. Two harvest methods, "cut and come again" (CACA) and terminal harvest were also compared. In one set ofexpe'riments red leaf lettuce and mizuna were grown in pots in a Biomass Production System for education. Plants were harvested every two weeks by either method. Another set of experiments was performed using the rooting pillows to grow 5 varieties of leafy greens and cut harvesting at different intervals. Radishes were harvested and replanted at two-week intervals. Results indicate up to a 3 IOglO difference in microbial counts between some varieties of plants. Rooting medium resulted in an approximately 2 IOglO lower count in the lettuce grown in arscillite then those grown in the other mixtures. Harvest method and frequency had less impact on microbial counts only showing a significant increase in one variety of plant. Post harvest methods to decrease the bacterial counts on edible crops were investigated in these and other experiments. The effectiveness of PRO-SAN and UV-C radiation is compared.

Does intact pleura during internal mammary artery harvesting decreases pleuropulmonary complications

International Nuclear Information System (INIS)

Paracha, V.I.; Iqbal, M.A.; Rashid, A.

2011-01-01

harvesting is recommended because of the added advantage of decrease rate of pleural effusion. (author)

Electrodynamic energy harvester for electrical transformer's ...

Indian Academy of Sciences (India)

Electrical transformer; electrodynamic; energy harvester; self-powered ...... Kennedy S P and Gordner T 2013 Hot spot studies for sheet wound transformer wind- ... and Lambert F 2011 Powering low-cost utility sensors using energy harvesting.

IAEA safeguards and classified materials

International Nuclear Information System (INIS)

Pilat, J.F.; Eccleston, G.W.; Fearey, B.L.; Nicholas, N.J.; Tape, J.W.; Kratzer, M.

1997-01-01

The international community in the post-Cold War period has suggested that the International Atomic Energy Agency (IAEA) utilize its expertise in support of the arms control and disarmament process in unprecedented ways. The pledges of the US and Russian presidents to place excess defense materials, some of which are classified, under some type of international inspections raises the prospect of using IAEA safeguards approaches for monitoring classified materials. A traditional safeguards approach, based on nuclear material accountancy, would seem unavoidably to reveal classified information. However, further analysis of the IAEA's safeguards approaches is warranted in order to understand fully the scope and nature of any problems. The issues are complex and difficult, and it is expected that common technical understandings will be essential for their resolution. Accordingly, this paper examines and compares traditional safeguards item accounting of fuel at a nuclear power station (especially spent fuel) with the challenges presented by inspections of classified materials. This analysis is intended to delineate more clearly the problems as well as reveal possible approaches, techniques, and technologies that could allow the adaptation of safeguards to the unprecedented task of inspecting classified materials. It is also hoped that a discussion of these issues can advance ongoing political-technical debates on international inspections of excess classified materials

Open strings on AdS2 branes

International Nuclear Information System (INIS)

Lee, Peter; Ooguri, Hirosi.; Park, Jongwon; Tannenhauser, Jonathan

2001-01-01

We study the spectrum of open strings on AdS 2 branes in AdS 3 in an NS-NS background, using the SL(2,R) WZW model. When the brane carries no fundamental string charge, the open string spectrum is the holomorphic square root of the spectrum of closed strings in AdS 3 . It contains short and long strings, and is invariant under spectral flow. When the brane carries fundamental string charge, the open string spectrum again contains short and long strings in all winding sectors. However, branes with fundamental string charge break half the spectral flow symmetry. This has different implications for short and long strings. As the fundamental string charge increases, the brane approaches the boundary of AdS 3 . In this limit, the induced electric field on the worldvolume reaches its critical value, producing noncommutative open string theory on AdS 2

Conical singularities in AdS space time

International Nuclear Information System (INIS)

Ferreira, Cristine Nunes

2011-01-01

Full text: In recent years, the study of conformal gauge theories from 10-D has been motivated by the AdS d+1 /CFT d correspondence, first conjectured by J. Maldacena. The aim of this work is to consider the d = 4 case by analysing the configuration of the N coincident D3 branes. In this context, the work shows that there is a duality between type IIB string theory in AdS 5 x S 5 and N = 4 SU(N) Super Yang-Mills Theory in the IR. The AdS 5 /CFT 4 correspondence brought also new approaches to the strong coupling problem in QCD. Nowadays, there is a whole line of works that focus on the low dimensional correspondence AdS 4 /CFT 3 , like the application to graphene and topological insulators, and the AdS 3 /CFT 2 correspondence, related with the entanglement entropy. In this work, we consider the vortex configuration solution to the AdS 4 and AdS 3 space-time. The most important motivation is to discuss the boundary theory resulting from these solutions. We have examined a straightforward approach to a holographic computation of the graphene and entanglement entropy in the presence of the conical singularity. After this analysis, we consider the scalar field in the bulk in the presence of this metrics and work out the compactification modes. Taking the holographic point of view, we study and discuss the resulting Green function. (author)

Desert water harvesting to benefit wildlife: a simple, cheap, and durable sub-surface water harvester for remote locations.

Science.gov (United States)

Rice, William E

2004-12-01

A sub-surface desert water harvester was constructed in the sagebrush steppe habitat of south-central Idaho, U.S.A. The desert water harvester utilizes a buried micro-catchment and three buried storage tanks to augment water for wildlife during the dry season. In this region, mean annual precipitation (MAP) ranges between about 150-250 mm (6"-10"), 70% of which falls during the cold season, November to May. Mid-summer through early autumn, June through October, is the dry portion of the year. During this period, the sub-surface water harvester provides supplemental water for wildlife for 30-90 days, depending upon the precipitation that year. The desert water harvester is constructed with commonly available, "over the counter" materials. The micro-catchment is made of a square-shaped, 20 mL. "PERMALON" polyethylene pond liner (approximately 22.9 m x 22.9 m = 523 m2) buried at a depth of about 60 cm. A PVC pipe connects the harvester with two storage tanks and a drinking trough. The total capacity of the water harvester is about 4777 L (1262 U.S. gallons) which includes three underground storage tanks, a trough and pipes. The drinking trough is refined with an access ramp for birds and small animals. The technology is simple, cheap, and durable and can be adapted to other uses, e.g. drip irrigation, short-term water for small livestock, poultry farming etc. The desert water harvester can be used to concentrate and collect water from precipitation and run-off in semi-arid and arid regions. Water harvested in such a relatively small area will not impact the ground water table but it should help to grow small areas of crops or vegetables to aid villagers in self-sufficiency.

Development of energy harvesting modules based on piezoceramics

Energy Technology Data Exchange (ETDEWEB)

Kulkarni, V.; Waechter, D.; Ben Mrad, R. [Toronto Univ., ON (Canada). Dept. of Mechanical and Industrial Engineering; El-Diraby, T. [Toronto Univ., ON (Canada). Dept. of Civil Engineering; Somayajula, N.; Nemana, S.; Prasad, E. [Sensor Technology Ltd., Collingwood, ON (Canada)

2009-07-01

Self-powered devices can overcome the current reliance and limitations of finite-supply batteries. They have potential in developing next-generation wireless electronics for a wide variety of applications such as health monitoring in civil infrastructure, micro-electro-mechanical system (MEMS) sensor arrays for automotive and aerospace applications, and sensor arrays for environmental control. These energy harvesting devices capture the ambient energy surrounding a system and convert it into usable electrical energy. A common method of power harvesting is to convert ambient mechanical vibrations into electricity through the use of piezoelectric materials such as piezoceramics (PZT). This paper highlighted some of the recent developments in piezoceramic energy harvesting along with proposed circuits that can improve the performance of energy harvesters. The successful storage and use of energy generated by various harvesting devices requires the use of specific circuitry to optimize the output from the devices. Energy harvesting circuitry was characterized in terms of energy storage; AC/DC converter; DC-DC step down converter; and non-linear voltage processing. The patent activity and applications on piezoceramic energy harvesting was also summarized. It was concluded that despite significant research, piezoceramic energy harvesting remains an emerging technology that requires considerable advancement before it can be commercially viable. The power generated by current piezoelectric harvesters is too low for many applications. Alternative piezoceramic materials and their characteristics must be investigated. 31 refs., 1 tab., 4 figs.

CRITICAL INDICATORS IN MECHANIZED HARVEST GRAINS AND FIBER

Directory of Open Access Journals (Sweden)

E. Boeing

2017-10-01

Full Text Available Due to the growth in grain production and intensification of production systems losses are inevitable. The harvest as the last operation performed in the field requires better attention. Although the origins are varied and losses occur both before and during harvesting, approximately 80% of them occur by mechanisms of action of the harvester cutting platform. It is necessary to know the causes of losses, whether physical or physiological operational. Thus, the objective was to conduct a survey of potential losses and / or environmental factors that affect machinery and effectively and should be prioritized in a management program in order to raise the efficiency of harvesting. From the collected data determined if the potential of critical failures through the method of analysis and failure mode effects, using a questionnaire listed with the selected quality indicators. It was concluded that in the mechanical harvesting of cotton harvested product loss and impurity had insusceptible rates be prioritized goals in the management of the production process. While the grain crop (soybean / corn moisture grain and grain breaks are still the main causes in the loss of quality of the product, stressing the importance of harvesters in improving the characteristics at harvest in order to minimize qualitative grain losses.

Combined Euler column vibration isolation and energy harvesting

Science.gov (United States)

Davis, R. B.; McDowell, M. D.

2017-05-01

A new device that combines vibration isolation and energy harvesting is modeled, simulated, and tested. The vibration isolating portion of the device uses post-buckled beams as its spring elements. Piezoelectric film is applied to the beams to harvest energy from their dynamic flexure. The entire device operates passively on applied base excitation and requires no external power or control system. The structural system is modeled using the elastica, and the structural response is applied as forcing on the electric circuit equation to predict the output voltage and the corresponding harvested power. The vibration isolation and energy harvesting performance is simulated across a large parameter space and the modeling approach is validated with experimental results. Experimental transmissibilities of 2% and harvested power levels of 0.36 μW are simultaneously demonstrated. Both theoretical and experimental data suggest that there is not necessarily a trade-off between vibration isolation and harvested power. That is, within the practical operational range of the device, improved vibration isolation will be accompanied by an increase in the harvested power as the forcing frequency is increased.

Flexible Piezoelectric Energy Harvesting from Mouse Click Motions

Directory of Open Access Journals (Sweden)

Youngsu Cha

2016-07-01

Full Text Available In this paper, we study energy harvesting from the mouse click motions of a robot finger and a human index finger using a piezoelectric material. The feasibility of energy harvesting from mouse click motions is experimentally and theoretically assessed. The fingers wear a glove with a pocket for including the piezoelectric material. We model the energy harvesting system through the inverse kinematic framework of parallel joints in a finger and the electromechanical coupling equations of the piezoelectric material. The model is validated through energy harvesting experiments in the robot and human fingers with the systematically varying load resistance. We find that energy harvesting is maximized at the matched load resistance to the impedance of the piezoelectric material, and the harvested energy level is tens of nJ.

Determining Appropriate Harvesting Date and Storage Life of Kinnow Mandarine Fruits in Jiroft County

Directory of Open Access Journals (Sweden)

Seied Mehdi Miri

2018-02-01

Full Text Available Introduction. Citrus is one of the most commercially important horticultural crops grown in tropical and sub-tropical regions of the world. They are classified as non-climacteric fruits. Harvesting date and storage can influence citrus fruit quality and shelf life. In Iran, some members of citrus family including sweet orange and mandarin are produced as an export crop, so research on fruit quality and storage life is needed. There is no available scientific literature regarding the effect of harvesting date and storage duration on retaining the postharvest physicochemical properties of Kinnow mandarin under cold storage. The main objective of the present study was to evaluate the effect of harvesting date and storing time on shelf life and quality of Kinnow mandarin fruits under Jiroft weather conditions. Materials and Methods. Investigations were carried out on mandarin (Citrus reticulata cv. Kinnow grafted on sour orange rootstock in an orchard located in Jiroft and Kahnooj Agricultural Research Center, Jiroft, Iran. Fruits were harvested on 6th December, 21th December, 5th January, 20th January and 4th February. After cold storage for 30-90 days at 4-6 °C, the fruit was analyzed for quantitative and qualitative characteristics including weight of fruit, peel, meat, pulp and juice, fruit weight loss, pH, total soluble solids (TSS, titratable acidity (TA and TSS/TA. Experiment was arranged in a split plot based on randomized complete block design (RCBD. Data analysis and similarity coefficient (Pearson's method were performed using SPSS.16 software, and means comparison was performed by using Duncan's multiple range test at 1 and 5% probability levels. Results and Discussion. The results showed that the interaction effect of harvesting date and storage period on the weight of the fruit, meat, pulp and juice and TSS, TA and TSS/TA was significant at 1% probability level. Weight of harvested fruits from 6th December to 5th January was constant

Refreshing Music: Fog Harvesting with Harps

Science.gov (United States)

Shi, Weiwei; Anderson, Mark; Kennedy, Brook; Boreyko, Jonathan

2017-11-01

Fog harvesting is a useful technique for obtaining fresh water in arid climates. The wire meshes currently utilized for fog harvesting suffer from dual constraints: coarse meshes cannot efficiently capture fog, while fine meshes suffer from clogging issues. Here, we design a new type of fog harvester comprised of an array of vertical wires, which we call ``fog harps.'' To investigate the water collection efficiency, three fog harps were designed with different diameters (254 μm, 508 μm and 1.30 mm) but the same pitch-to-diameter ratio of 2. For comparison, three different size meshes were purchased with equivalent dimensions. As expected for the mesh structures, the mid-sized wires performed the best, with a drop-off in performance for the fine or coarse meshes. In contrast, the fog harvesting rate continually increased with decreasing wire diameter for the fog harps, due to its low hysteresis that prevented droplet clogging. This resulted in a 3-fold enhancement in the fog harvesting rate for the harp form factor compared to the mesh. The lack of a performance ceiling for the harps suggest that even greater enhancements could be achieved by scaling down to yet smaller sizes.

Classifying features in CT imagery: accuracy for some single- and multiple-species classifiers

Science.gov (United States)

Daniel L. Schmoldt; Jing He; A. Lynn Abbott

1998-01-01

Our current approach to automatically label features in CT images of hardwood logs classifies each pixel of an image individually. These feature classifiers use a back-propagation artificial neural network (ANN) and feature vectors that include a small, local neighborhood of pixels and the distance of the target pixel to the center of the log. Initially, this type of...

36 CFR 223.219 - Sustainable harvest of special forest products.

Science.gov (United States)

2010-07-01

... 36 Parks, Forests, and Public Property 2 2010-07-01 2010-07-01 false Sustainable harvest of....219 Sustainable harvest of special forest products. (a) Sustainable harvest levels. Prior to offering... product's sustainable harvest level. A special forest product's sustainable harvest level is the total...

Globally regular instability of AdS_3

OpenAIRE

Bizon, P.; Jałmużna, J.

2013-01-01

We consider three-dimensional AdS gravity minimally coupled to a massless scalar field and study numerically the evolution of small smooth circularly symmetric perturbations of the $AdS_3$ spacetime. As in higher dimensions, for a large class of perturbations, we observe a turbulent cascade of energy to high frequencies which entails instability of $AdS_3$. However, in contrast to higher dimensions, the cascade cannot be terminated by black hole formation because small perturbations have ener...

Small-Sized Whole-Tree Harvesting in Finland

Energy Technology Data Exchange (ETDEWEB)

Kaerhae, Kalle [Metsaeteho Oy, Helsinki (Finland)

2006-07-15

In Finland, there are two mechanized harvesting systems used for small diameter (d{sub 1.3}= 10 cm) thinning wood: 1) the traditional two-machine (harvester and forwarder) system, and 2) the harwarder system (i.e. the same machine performs both felling and haulage to the roadside). At present, there are more than 20 energy wood harwarders in use in Finland. However, there have been no comprehensive studies carried out on the energy wood harwarders. This paper looks into the productivity results obtained with energy wood harwarders. In addition, the energy wood harvesting costs for harwarders are compared with those of the two-machine system. The results clearly indicated what kind of machine resources can be profitably allocated to different whole-tree harvesting sites. The energy wood harwarders should be directed towards harvesting sites where the forwarding distances are small, the trees harvested are relatively small, and the total volume of energy wood removed is quite low. Respectively, when the stem size removed is relatively large in young stands, and the forest haulage distances are long, the traditional two-machine system is more competitive.

Tropical forest harvesting and taxation: a dynamic model of harvesting behavior under selective extraction systems

Science.gov (United States)

Robert F. Conrad; Malcolm Gillis; D. Evan Mercer

2005-01-01

A dynamic model of selective harvesting in multi-species,multi-age tropical forests is developed. Forests are predicted to exhibit different optimal harvesting profiles depending on the nature of their joint cost functions and own or cross-species stock effects. The model is applied to the controversy about incentives produced by various taxes. The impacts of specific...

Harvesting of microalgae by bio-flocculation

NARCIS (Netherlands)

Salim, S.; Bosma, R.; Vermuë, M.H.; Wijffels, R.H.

2011-01-01

The high-energy input for harvesting biomass makes current commercial microalgal biodiesel production economically unfeasible. A novel harvesting method is presented as a cost and energy efficient alternative: the bio-flocculation by using one flocculating microalga to concentrate the

Experimental measurement of energy harvesting with backpack

Science.gov (United States)

Pavelkova, Radka; Vala, David; Suranek, Pavel; Mahdal, Miroslav

2017-08-01

This article deals with the energy harvesting systems, especially the energy harvesting backpack, which appears as a convenient means for energy harvesting for mobile sensors power. Before starting the experiment, it was necessary to verify whether this energy will be sufficient to get acquainted with the human kinematics and analyze problematics itself. For this purpose there was used motion capture technology from Xsens. Measured data on the position of a particle moving man and back when walking, these data were then used for experimental realization of energy harvesting backpack and as input data to the simulation in Simulink, which brought us a comparison between theoretical assumptions and practical implementation. When measuring characteristics of energy harvesting system we have a problem with measurements on backpack solved when redoing of the hydraulic cylinder as a source of a suitable movement corresponding to the amplitude and frequency of human walk.

Apparatus and method for harvesting woody plantations

Science.gov (United States)

Eggen, D.L.

1988-11-15

A tree harvester for harvesting felled trees includes a wheel mounted wood chipper which moves toward the butt ends of the tree stems to be processed. The harvester includes a plurality of rotating alignment discs in front of the chipper. These discs align the tree stems to be processed with the mouth of the chipper. A chipper infeed cylinder is rotatably mounted between the discs and the front end of the chipper, and lifts the tree stem butts up from the ground into alignment with the chipper inlet port. The chips discharge from the chipper and go into a chip hopper which moves with the tree harvester. 8 figs.

Microelectronic circuit design for energy harvesting systems

CERN Document Server

Di Paolo Emilio, Maurizio

2017-01-01

This book describes the design of microelectronic circuits for energy harvesting, broadband energy conversion, new methods and technologies for energy conversion. The author also discusses the design of power management circuits and the implementation of voltage regulators. Coverage includes advanced methods in low and high power electronics, as well as principles of micro-scale design based on piezoelectric, electromagnetic and thermoelectric technologies with control and conditioning circuit design. Provides a single-source reference to energy harvesting and its applications; Serves as a practical guide to microelectronics design for energy harvesting, with application to mobile power supplies; Enables readers to develop energy harvesting systems for wearable/mobile electronics.

Manifestly T-dual formulation of AdS space

International Nuclear Information System (INIS)

Hatsuda, Machiko; Kamimura, Kiyoshi; Siegel, Warren

2017-01-01

We present a manifestly T-dual formulation of curved spaces such as an AdS space. For group manifolds related by the orthogonal vielbein fields the three form H=dB in the doubled space is universal at least locally. We construct an affine nondegenerate doubled bosonic AdS algebra to define the AdS space with the Ramond-Ramond flux. The non-zero commutator of the left and right momenta leads to that the left momentum is in an AdS space while the right momentum is in a dS space. Dimensional reduction constraints and the physical AdS algebra are shown to preserve all the doubled coordinates.

Manifestly T-dual formulation of AdS space

Energy Technology Data Exchange (ETDEWEB)

Hatsuda, Machiko [Physics Division, Faculty of Medicine, Juntendo University,Chiba 270-1695 (Japan); KEK Theory Center, High Energy Accelerator Research Organization,Tsukuba, Ibaraki 305-0801 (Japan); Kamimura, Kiyoshi [Physics Division, Faculty of Medicine, Juntendo University,Chiba 270-1695 (Japan); Siegel, Warren [C.N. Yang Institute for Theoretical Physics, Stony Brook University,Stony Brook, NY 11794-3840 (United States)

2017-05-12

We present a manifestly T-dual formulation of curved spaces such as an AdS space. For group manifolds related by the orthogonal vielbein fields the three form H=dB in the doubled space is universal at least locally. We construct an affine nondegenerate doubled bosonic AdS algebra to define the AdS space with the Ramond-Ramond flux. The non-zero commutator of the left and right momenta leads to that the left momentum is in an AdS space while the right momentum is in a dS space. Dimensional reduction constraints and the physical AdS algebra are shown to preserve all the doubled coordinates.

Pyroelectric Energy Harvesting: With Thermodynamic-Based Cycles

OpenAIRE

Saber Mohammadi; Akram Khodayari

2012-01-01

This work deals with energy harvesting from temperature variations using ferroelectric materials as a microgenerator. The previous researches show that direct pyroelectric energy harvesting is not effective, whereas thermodynamic-based cycles give higher energy. Also, at different temperatures some thermodynamic cycles exhibit different behaviours. In this paper pyroelectric energy harvesting using Lenoir and Ericsson thermodynamic cycles has been studied numerically and the two cycles were c...

Classifying Dementia Using Local Binary Patterns from Different Regions in Magnetic Resonance Images

Directory of Open Access Journals (Sweden)

Ketil Oppedal

2015-01-01

Full Text Available Dementia is an evolving challenge in society, and no disease-modifying treatment exists. Diagnosis can be demanding and MR imaging may aid as a noninvasive method to increase prediction accuracy. We explored the use of 2D local binary pattern (LBP extracted from FLAIR and T1 MR images of the brain combined with a Random Forest classifier in an attempt to discern patients with Alzheimer's disease (AD, Lewy body dementia (LBD, and normal controls (NC. Analysis was conducted in areas with white matter lesions (WML and all of white matter (WM. Results from 10-fold nested cross validation are reported as mean accuracy, precision, and recall with standard deviation in brackets. The best result we achieved was in the two-class problem NC versus AD + LBD with total accuracy of 0.98 (0.04. In the three-class problem AD versus LBD versus NC and the two-class problem AD versus LBD, we achieved 0.87 (0.08 and 0.74 (0.16, respectively. The performance using 3DT1 images was notably better than when using FLAIR images. The results from the WM region gave similar results as in the WML region. Our study demonstrates that LBP texture analysis in brain MR images can be successfully used for computer based dementia diagnosis.

LCC: Light Curves Classifier

Science.gov (United States)

Vo, Martin

2017-08-01

Light Curves Classifier uses data mining and machine learning to obtain and classify desired objects. This task can be accomplished by attributes of light curves or any time series, including shapes, histograms, or variograms, or by other available information about the inspected objects, such as color indices, temperatures, and abundances. After specifying features which describe the objects to be searched, the software trains on a given training sample, and can then be used for unsupervised clustering for visualizing the natural separation of the sample. The package can be also used for automatic tuning parameters of used methods (for example, number of hidden neurons or binning ratio). Trained classifiers can be used for filtering outputs from astronomical databases or data stored locally. The Light Curve Classifier can also be used for simple downloading of light curves and all available information of queried stars. It natively can connect to OgleII, OgleIII, ASAS, CoRoT, Kepler, Catalina and MACHO, and new connectors or descriptors can be implemented. In addition to direct usage of the package and command line UI, the program can be used through a web interface. Users can create jobs for ”training” methods on given objects, querying databases and filtering outputs by trained filters. Preimplemented descriptors, classifier and connectors can be picked by simple clicks and their parameters can be tuned by giving ranges of these values. All combinations are then calculated and the best one is used for creating the filter. Natural separation of the data can be visualized by unsupervised clustering.

75 FR 3888 - Migratory Bird Subsistence Harvest in Alaska; Harvest Regulations for Migratory Birds in Alaska...

Science.gov (United States)

2010-01-25

...-0082; 91200-1231-9BPP-L2] RIN 1018-AW67 Migratory Bird Subsistence Harvest in Alaska; Harvest Regulations for Migratory Birds in Alaska During the 2010 Season AGENCY: Fish and Wildlife Service, Interior... Service, are reopening the public comment period on our proposed rule to establish migratory bird...

Classifying and Analyzing 3d Cell Motion in Jammed Microgels

Science.gov (United States)

Bhattacharjee, Tapomoy; Sawyer, W. Gregory; Angelini, Thomas

Soft granular polyelectrolyte microgels swell in liquid cell growth media to form a continuous elastic solid that can easily transition between solid to fluid state under a low shear stress. Such Liquid-like solids (LLS) have recently been used to create 3D cellular constructs as well as to support, culture and harvest cells in 3D. Current understanding of cell migration mechanics in 3D was established from experiments performed in natural and synthetic polymer networks. Spatial variation in network structure and the transience of degradable gels limit their usefulness in quantitative cell mechanics studies. By contrast, LLS growth media approximates a homogeneous continuum, enabling tractable cell mechanics measurements to be performed in 3D. Here, we introduce a process to understand and classify cytotoxic T cell motion in 3D by studying cellular motility in LLS media. General classification of T cell motion can be achieved with a very traditional statistical approach: the cell's mean squared displacement (MSD) as a function of delay time. We will also use Langevin approaches combined with the constitutive equations of the LLS medium to predict the statistics of T cell motion. National Science Foundation under Grant No. DMR-1352043.

Nano/microscale pyroelectric energy harvesting: challenges and opportunities

Directory of Open Access Journals (Sweden)

Devashish Lingam

2013-12-01

Full Text Available With the ever-growing demand for renewable energy sources, energy harvesting from natural resources has gained much attention. Energy sources such as heat and mechanical motion could be easily harvested based on pyroelectric, thermoelectric, and piezoelectric effects. The energy harvested from otherwise wasted energy in the environment can be utilized in self-powered micro and nano devices, and wearable electronics, which required only µW–mW power. This article reviews pyroelectric energy harvesting with an emphasis on recent developments in pyroelectric energy harvesting and devices at micro/nanoscale. Recent developments are presented and future challenges and opportunities for more efficient materials and devices with higher energy conversion efficiency are also discussed.

Mixed-symmetry fields in AdS(5), conformal fields, and AdS/CFT

Energy Technology Data Exchange (ETDEWEB)

Metsaev, R.R. [Department of Theoretical Physics, P.N. Lebedev Physical Institute,Leninsky prospect 53, Moscow 119991 (Russian Federation)

2015-01-15

Mixed-symmetry arbitrary spin massive, massless, and self-dual massive fields in AdS(5) are studied. Light-cone gauge actions for such fields leading to decoupled equations of motion are constructed. Light-cone gauge formulation of mixed-symmetry anomalous conformal currents and shadows in 4d flat space is also developed. AdS/CFT correspondence for normalizable and non-normalizable modes of mixed-symmetry AdS fields and the respective boundary mixed-symmetry anomalous conformal currents and shadows is studied. We demonstrate that the light-cone gauge action for massive mixed-symmetry AdS field evaluated on solution of the Dirichlet problem amounts to the light-cone gauge 2-point vertex of mixed-symmetry anomalous shadow. Also we show that UV divergence of the action for mixed-symmetry massive AdS field with some particular value of mass parameter evaluated on the Dirichlet problem amounts to the action of long mixed-symmetry conformal field, while UV divergence of the action for mixed-symmetry massless AdS field evaluated on the Dirichlet problem amounts to the action of short mixed-symmetry conformal field. We speculate on string theory interpretation of a model which involves short low-spin conformal fields and long higher-spin conformal fields.

15 CFR 4.8 - Classified Information.

Science.gov (United States)

2010-01-01

... 15 Commerce and Foreign Trade 1 2010-01-01 2010-01-01 false Classified Information. 4.8 Section 4... INFORMATION Freedom of Information Act § 4.8 Classified Information. In processing a request for information..., the information shall be reviewed to determine whether it should remain classified. Ordinarily the...

Fluid flow nozzle energy harvesters

Science.gov (United States)

Sherrit, Stewart; Lee, Hyeong Jae; Walkemeyer, Phillip; Winn, Tyler; Tosi, Luis Phillipe; Colonius, Tim

2015-04-01

Power generation schemes that could be used downhole in an oil well to produce about 1 Watt average power with long-life (decades) are actively being developed. A variety of proposed energy harvesting schemes could be used to extract energy from this environment but each of these has their own limitations that limit their practical use. Since vibrating piezoelectric structures are solid state and can be driven below their fatigue limit, harvesters based on these structures are capable of operating for very long lifetimes (decades); thereby, possibly overcoming a principle limitation of existing technology based on rotating turbo-machinery. An initial survey [1] identified that spline nozzle configurations can be used to excite a vibrating piezoelectric structure in such a way as to convert the abundant flow energy into useful amounts of electrical power. This paper presents current flow energy harvesting designs and experimental results of specific spline nozzle/ bimorph design configurations which have generated suitable power per nozzle at or above well production analogous flow rates. Theoretical models for non-dimensional analysis and constitutive electromechanical model are also presented in this paper to optimize the flow harvesting system.

Lorentzian AdS, Wormholes and Holography

CERN Document Server

Arias, Raul E; Silva, Guillermo A

2011-01-01

We investigate the structure of two point functions for the QFT dual to an asymptotically Lorentzian AdS-wormhole. The bulk geometry is a solution of 5-dimensional second order Einstein Gauss Bonnet gravity and causally connects two asymptotically AdS space times. We revisit the GKPW prescription for computing two-point correlation functions for dual QFT operators O in Lorentzian signature and we propose to express the bulk fields in terms of the independent boundary values phi_0^\\pm at each of the two asymptotic AdS regions, along the way we exhibit how the ambiguity of normalizable modes in the bulk, related to initial and final states, show up in the computations. The independent boundary values are interpreted as sources for dual operators O^\\pm and we argue that, apart from the possibility of entanglement, there exists a coupling between the degrees of freedom leaving at each boundary. The AdS_(1+1) geometry is also discussed in view of its similar boundary structure. Based on the analysis, we propose a ...

OAI-PMH for resource harvesting, tutorial 2

CERN Multimedia

CERN. Geneva; Nelson, Michael

2005-01-01

A variety of examples have arisen in which the Open Archives Initiative Protocol for Metadata Harvesting (OAI-PMH) has been used for applications beyond bibliographic metadata interchange. One of these examples is the use of OAI-PMH to harvest resources and not just metadata. Advanced resource discovery and preservations capabilities are possible by combining complex object formats such as MPEG-21 DIDL, METS and SCORM with the OAI-PMH. In this tutorial, we review community conventions and practices that have provided the impetus for resource harvesting. We show how the introduction of complex object formats for the representation of resources leads to a robust, OAI-PMH-based framework for resource harvesting. We detail how complex object formats fit in the OAI-PMH data model, and how (compound) digital objects can be represented using a complex object format for exposure by an OAI-PMH repository. We also cover tools that are available for the implementation of an OAI-PMH-based resource harvesting solution. Fu...

Piezoelectric energy harvesting from broadband random vibrations

International Nuclear Information System (INIS)

Adhikari, S; Friswell, M I; Inman, D J

2009-01-01

Energy harvesting for the purpose of powering low power electronic sensor systems has received explosive attention in the last few years. Most works using deterministic approaches focusing on using the piezoelectric effect to harvest ambient vibration energy have concentrated on cantilever beams at resonance using harmonic excitation. Here, using a stochastic approach, we focus on using a stack configuration and harvesting broadband vibration energy, a more practically available ambient source. It is assumed that the ambient base excitation is stationary Gaussian white noise, which has a constant power-spectral density across the frequency range considered. The mean power acquired from a piezoelectric vibration-based energy harvester subjected to random base excitation is derived using the theory of random vibrations. Two cases, namely the harvesting circuit with and without an inductor, have been considered. Exact closed-form expressions involving non-dimensional parameters of the electromechanical system have been given and illustrated using numerical examples

Piezoelectric energy harvesting from broadband random vibrations

Science.gov (United States)

Adhikari, S.; Friswell, M. I.; Inman, D. J.

2009-11-01

Energy harvesting for the purpose of powering low power electronic sensor systems has received explosive attention in the last few years. Most works using deterministic approaches focusing on using the piezoelectric effect to harvest ambient vibration energy have concentrated on cantilever beams at resonance using harmonic excitation. Here, using a stochastic approach, we focus on using a stack configuration and harvesting broadband vibration energy, a more practically available ambient source. It is assumed that the ambient base excitation is stationary Gaussian white noise, which has a constant power-spectral density across the frequency range considered. The mean power acquired from a piezoelectric vibration-based energy harvester subjected to random base excitation is derived using the theory of random vibrations. Two cases, namely the harvesting circuit with and without an inductor, have been considered. Exact closed-form expressions involving non-dimensional parameters of the electromechanical system have been given and illustrated using numerical examples.

A Miniature Coupled Bistable Vibration Energy Harvester

International Nuclear Information System (INIS)

Zhu, D; Arthur, D C; Beeby, S P

2014-01-01

This paper reports the design and test of a miniature coupled bistable vibration energy harvester. Operation of a bistable structure largely depends on vibration amplitude rather than frequency, which makes it very promising for wideband vibration energy harvesting applications. A coupled bistable structure consists of a pair of mobile magnets that create two potential wells and thus the bistable phenomenon. It requires lower excitation to trigger bistable operation compared to conventional bistable structures. Based on previous research, this work focused on miniaturisation of the coupled bistable structure for energy harvesting application. The proposed bistable energy harvester is a combination of a Duffing's nonlinear structure and a linear assisting resonator. Experimental results show that the output spectrum of the miniature coupled bistable vibration energy harvester was the superposition of several spectra. It had a higher maximum output power and a much greater bandwidth compared to simply the Duffing's structure without the assisting resonator

A Galloping Energy Harvester with Attached Flow

Science.gov (United States)

Denissenko, Petr; Khovanov, Igor; Tucker-Harvey, Sam

2017-11-01

Aeroelastic energy harvesters are a promising technology for the operation of wireless sensors and microelectromechanical systems, as well as providing the possibility of harvesting wind energy in applications were conventional wind turbines are ineffective, such as in highly turbulent flows, or unreliable, such as in harsh environmental conditions. The development of aeroelastic energy harvesters to date has focused on the flutter of airfoils, the galloping of prismatic structures, and the vortex induced vibrations. We present a novel type of galloping energy harvester with the flow becoming attached when the oscillation amplitude is high enough. With the flow attached, the harvester blade acts closer to an aerofoil than a bluff body, which results in a higher efficiency. The dynamics of a prototype device has been characterised experimentally with the use of a motion tracking system. The flow structure in the vicinity of the device has been studied using smoke visualisation and PIV measurements. A lumped parameter mathematical model has been developed and related to the experimental results.

PROTOCOL FOR HARVESTING ‘BRS PRINCESS’ BANANA FRUITS

Directory of Open Access Journals (Sweden)

LUIZ FERNANDO GANASSALI DE OLIVEIRA JUNIOR

Full Text Available ABSTRACT The aim of this study was to develop a protocol to determine the ideal harvest time for ‘BRS Princess’ banana, using the number of aborted bracts. The bananas were selected according to the number of aborted bracts since the flowering until the time of harvest, yield clusters with 90, 95, 100 and 105 aborted bracts. The physical and chemical analyzes were performed every 3 days on fruits: soluble solids, titratable acidity, weight loss, length and diameter, pH, firmness, skin color (CIELab and pectin enzyme activity. The statistical design was completely randomized in a 4x5 factorial, with 4 points and 5 periods of harvest analysis and data were evaluated using analysis of variance and regression. For all parameters, fruits harvested at 90 and 105 aborted bracts had unwanted changes in its metabolism when compared to the other treatments, while fruits harvested at 95 and 100 aborted bracts had the best post-harvest characteristics. This method was effective in determining the point of harvest in ‘BRS Princess’ banana fruits, since it allows to obtain fruit quality after storage, and is a simple and objective method.

Nonlinear realization of supersymmetric AdS space isometries

International Nuclear Information System (INIS)

Clark, T. E.; Love, S. T.

2006-01-01

The isometries of AdS 5 space and supersymmetric AdS 5 xS 1 space are nonlinearly realized on four-dimensional Minkowski space. The resultant effective actions in terms of the Nambu-Goldstone modes are constructed. The dilatonic mode governing the motion of the Minkowski space probe brane into the covolume of supersymmetric AdS 5 space is found to be unstable and the bulk of the AdS 5 space is unable to sustain the brane. No such instability appears in the nonsupersymmetric case

SCS-CN and GIS-based approach for identifying potential water harvesting sites in the Kali Watershed, Mahi River Basin, India

Science.gov (United States)

Ramakrishnan, D.; Bandyopadhyay, A.; Kusuma, K. N.

2009-08-01

The Kali sub-watershed is situated in the semi-arid region of Gujarat, India and forms a part of the Mahi River Watershed. This watershed receives an average annual rainfall of 900mm mainly between July and September. Due to high runoff potential, evapo-transpiration and poor infiltration, drought like situation prevails in this area from December to June almost every year. In this paper, augmentation of water resource is proposed by construction of runoff harvesting structures like check dam, percolation pond, farm pond, well and subsurface dyke. The site suitability for different water harvesting structures is determined by considering spatially varying parameters like runoff potential, slope, fracture pattern and micro-watershed area. GIS is utilised as a tool to store, analyse and integrate spatial and attribute information pertaining to runoff, slope, drainage and fracture. The runoff derived by SCS-CN method is a function of runoff potential which can be expressed in terms of runoff coefficient (ratio between the runoff and rainfall) which can be classified into three classes, viz., high (>40%), moderate (20-40%) and low (<20%). In addition to IMSD, FAO specifications for water harvesting/recharging structures, parameters such as effective storage, rock mass permeability are herein considered to augment effective storage. Using the overlay and decision tree concepts in GIS, potential water harvesting sites are identified. The derived sites are field investigated for suitability and implementation. In all, the accuracy of the site selection at implementation level varies from 80-100%.

Reducing electrocoagulation harvesting costs for practical microalgal biodiesel production.

Science.gov (United States)

Dassey, Adam J; Theegala, Chandra S

2014-01-01

Electrocoagulation has shown potential to be a primary microalgae harvesting technique for biodiesel production. However, methods to reduce energy and electrode costs are still necessary for practical application. Electrocoagulation tests were conducted on Nannochloris sp. and Dunaliella sp. using perforated aluminium and iron electrodes under various charge densities. Aluminium electrodes were shown to be more efficient than iron electrodes when harvesting both algal species. Despite the lower harvesting efficiency, however, the iron electrodes were more energy and cost efficient. Operational costs of less than $0.03/L oil were achieved when harvesting Nannochloris sp. with iron electrodes at 35% harvest efficiency, whereas aluminium electrodes cost $0.75/L oil with 42% harvesting efficiency. Increasing the harvesting efficiencies for both aluminium and iron electrodes also increased the overall cost per litre of oil, therefore lower harvesting efficiencies with lower energy inputs was recommended. Also, increasing the culturing salinity to 2 ppt sodium chloride for freshwater Nannochloris sp. was determined practical to improve the electrocoagulation energy efficiency despite a 25% reduction in cell growth.

Wireless Energy Harvesting Using Signals from Multiple Fading Channels

KAUST Repository

Chen, Yunfei

2017-08-01

In this paper, we study the average, the probability density function and the cumulative distribution function of the harvested power. In the study, the signals are transmitted from multiple sources. The channels are assumed to be either Rician fading or Gamma-shadowed Rician fading. The received signals are then harvested by using either a single harvester for simultaneous transmissions or multiple harvesters for transmissions at different frequencies, antennas or time slots. Both linear and nonlinear models for the energy harvester at the receiver are examined. Numerical results are presented to show that, when a large amount of harvested power is required, a single harvester or the linear range of a practical nonlinear harvester are more efficient, to avoid power outage. Further, the power transfer strategy can be optimized for fixed total power. Specifically, for Rayleigh fading, the optimal strategy is to put the total power at the source with the best channel condition and switch off all other sources, while for general Rician fading, the optimum magnitudes and phases of the transmitting waveforms depend on the channel parameters.

Fingerprint prediction using classifier ensembles

CSIR Research Space (South Africa)

Molale, P

2011-11-01

Full Text Available ); logistic discrimination (LgD), k-nearest neighbour (k-NN), artificial neural network (ANN), association rules (AR) decision tree (DT), naive Bayes classifier (NBC) and the support vector machine (SVM). The performance of several multiple classifier systems...

Harvesting budworm-damaged stands for fuel

Energy Technology Data Exchange (ETDEWEB)

Henley, S.G. (York, Sunbury, Charlotte Wood Products Marketing Board, (Canada))

1985-01-01

This project was initiated to demonstrate the economics and logistics of harvesting budworm-damaged stands for use as fuel. Dead spruce and balsam fir were to be harvested from small private woodlots in southwestern New Brunswick, using an integrated, full-tree harvesting system to produce wood chip fuel and other forest products. The overall objectives of the study are listed. The harvesting equipment and the selection of sites are discussed. The most efficient methods of finding candidate woodlots was found to be by advertising and word of mouth. Contact was made with 85 woodlot owners, and 45 woodlots were visited and evaluated for their suitability. A further 150 management plans were screened and rejected for various reasons. Only 2 woodlots were initially recognized as potential sites; however, after showing some interest, the owners decided not to participate. The reasons for the rejection of the various woodlots are listed. The fact that a number of owners were against clearcutting, and, in some cases, against any cutting, and that others showed no interest in the study, is attributed to the high percentage of white-collar workers owning woodlots. Other strategies for harvesting dead or scrap wood are suggested. 1 ref., 1 tab.

Non-relativistic AdS branes and Newton-Hooke superalgebra

International Nuclear Information System (INIS)

Sakaguchi, Makoto; Yoshida, Kentaroh

2006-01-01

We examine a non-relativistic limit of D-branes in AdS 5 x S 5 and M-branes in AdS 4/7 x S 7/4 . First, Newton-Hooke superalgebras for the AdS branes are derived from AdS x S superalgebras as Inoenue-Wigner contractions. It is shown that the directions along which the AdS-brane worldvolume extends are restricted by requiring that the isometry on the AdS-brane worldvolume and the Lorentz symmetry in the transverse space naturally extend to the super-isometry. We also derive Newton-Hooke superalgebras for pp-wave branes and show that the directions along which a brane worldvolume extends are restricted. Then the Wess-Zumino terms of the AdS branes are derived by using the Chevalley-Eilenberg cohomology on the super-AdS x S algebra, and the non-relativistic limit of the AdS-brane actions is considered. We show that the consistent limit is possible for the following branes: Dp (even,even) for p = 1 mod 4 and Dp (odd,odd) for p = 3 mod 4 in AdS 5 x S 5 , and M2 (0,3), M2 (2,1), M5 (1,5) and M5 (3,3) in AdS 4 x S 7 and S 4 x AdS 7 . We furthermore present non-relativistic actions for the AdS branes

Vibration energy harvesting using the Halbach array

International Nuclear Information System (INIS)

Zhu, Dibin; Beeby, Steve; Tudor, John; Harris, Nick

2012-01-01

This paper studies the feasibility of vibration energy harvesting using a Halbach array. A Halbach array is a specific arrangement of permanent magnets that concentrates the magnetic field on one side of the array while cancelling the field to almost zero on the other side. This arrangement can improve electromagnetic coupling in a limited space. The Halbach array offers an advantage over conventional layouts of magnets in terms of its concentrated magnetic field and low-profile structure, which helps improve the output power of electromagnetic energy harvesters while minimizing their size. Another benefit of the Halbach array is that due to the existence of an almost-zero magnetic field zone, electronic components can be placed close to the energy harvester without any chance of interference, which can potentially reduce the overall size of a self-powered device. The first reported example of a low-profile, planar electromagnetic vibration energy harvester utilizing a Halbach array was built and tested. Results were compared to ones for energy harvesters with conventional magnet layouts. By comparison, it is concluded that although energy harvesters with a Halbach array can have higher magnetic field density, a higher output power requires careful design in order to achieve the maximum magnetic flux gradient. (paper)

The consequences of balanced harvesting of fish communities

DEFF Research Database (Denmark)

Jacobsen, Nis Sand; Gislason, Henrik; Andersen, Ken Haste

2014-01-01

community structure and yield. We use a size- and trait-based model that resolves individual interactions through competition and predation to compare balanced harvesting with traditional selective harvesting, which protects juvenile fish from fishing. Four different exploitation patterns, generated......Balanced harvesting, where species or individuals are exploited in accordance with their productivity, has been proposed as a way to minimize the effects of fishing on marine fish communities and ecosystems. This calls for a thorough examination of the consequences balanced harvesting has on fish...... by combining selective or unselective harvesting with balanced or unbalanced fishing, are compared. We find that unselective balanced fishing, where individuals are exploited in proportion to their productivity, produces a slightly larger total maximum sustainable yield than the other exploitation patterns and...

Added sugars and ultra-processed foods in Spanish households (1990-2010).

Science.gov (United States)

Latasa, P; Louzada, M L D C; Martinez Steele, E; Monteiro, C A

2017-12-26

To study the association between ultra-processed foods acquisitions and added sugar content of total food purchases in Spanish households in 2010. Changes over time (1990-2000-2010) in ultra-processed food purchases and added sugars content of total food purchases are also compared. We used data from three nationally representative Household Budget Surveys (HBS) conducted in 1990, 2000 and 2010. Number of studied households was 21,012, 33,730 and 22,116, respectively. Purchased foods and drinks were classified according to NOVA food groups as ultra-processed foods, processed foods, unprocessed or minimally processed foods, or processed culinary ingredients. Linear and Poisson regressions were used to estimate the association between quintiles of energy contribution of ultra-processed foods and added sugars contents of total food purchases in 2010. Changes over time were assessed using tests of linear trend and Student's t test. In 2010, ultra-processed foods represented 31.7% of daily energy acquisitions and 80.4% of all added sugars. Added sugars content of food purchases raised from 7.3% in the lowest to 18.2% in the highest quintiles of energy contribution of ultra-processed foods. The risk of exceeding 10% energy from added sugars quadrupled between the lowest and highest quintiles. The percentage of ultra-processed foods on all food purchases almost tripled between 1990 and 2010 (from 11.0 to 31.7%), paralleling the increase of added sugars content (from 8.4 to 13.0%). Cutting down exceeding added sugars availability in Spain may require a reduction in ultra-processed food purchasing.

Evaluation of physical structure value in spring-harvested grass/clover silage and hay fed to heifers

DEFF Research Database (Denmark)

Schulze, A.K.S.; Nørgaard, P.; Byskov, M.V.

2015-01-01

The physical structure value of conserved grass/clover forages of spring harvest was evaluated by assessing effects of harvest time, conservation method, iNDF/NDF ratio and NDF intake (NDFI) per kg BW on chewing activity and fecal particle size in dairy heifers. A mixed sward consisting of ryegrass...... of 315, 436, 414 and 503 g/kg DM, respectively. Forages were fed as sole feed to four Jersey heifers of 435±30 kg BW in a 4×4 Latin square experiment. Feeding level was 90% of individual ad libitum intake, divided equally across two daily meals offered at 0800 and 1530 h. Chewing activity was estimated...... from recorded jaw movements (JM) oscillations continuously logged for 96 h and summarized per 24 h as mean effective rumination time and eating time. Eating behavior was further observed during four 20-min test meals. Weight proportion of large feces particles (>1.0 mm) and geometric mean fecal...

An autonomous robot for harvesting cucumbers in greenhouses

NARCIS (Netherlands)

Henten, van E.J.; Hemming, J.; Tuijl, van B.A.J.; Kornet, J.G.; Meuleman, J.; Bontsema, J.; Os, van E.A.

2002-01-01

This paper describes the concept of an autonomous robot for harvesting cucumbers in greenhouses. A description is given of the working environment of the robot and the logistics of harvesting. It is stated that for a 2 ha Dutch nursery, 4 harvesting robots and one docking station are needed during

Fabrication of SU-8 low frequency electrostatic energy harvester

KAUST Repository

Ramadan, Khaled S.

2011-11-01

A 1500μm × 1500μm × 150μm out-of-plane, gap closing, electrostatic energy harvester is designed and fabricated to harvest low-frequency ambient vibrations. SU-8 is used to fabricate the proof mass (1200μm × 1200μm × 150μm) and the 5 m springs. Different harvesters were designed to harvest at 50, 75 and 110 Hz. At 110 Hz, Simulations show that with an input vibration of 10 μm amplitude at the frequency of resonance of the structure, the energy harvester should generate an average output power density of 0.032μW/mm3. This is the most area-efficient low-frequency electrostatic harvester to-date. © 2011 IEEE.

A closer look at two AdS4 branes in an AdS5 bulk

International Nuclear Information System (INIS)

Thambyahpillai, Shiyamala

2005-01-01

We investigate a scenario with two AdS 4 branes in an AdS 5 bulk. In this scenario there are two gravitons and we investigate the role played by each of them for different positions of the second brane. We show that both gravitons play a significant role only when the turn-around point in the warp factor is approximately equidistant from both branes. We find that the ultralight mode becomes heavy as the second brane approaches the turn-around point, and the physics begins to resemble that of the RS model. Thus we demonstrate the crucial role played by the turn-around in the warp factor in enabling the presence of both gravitons. (author)

Carbon sequestration via wood harvest and storage: An assessment of its harvest potential

DEFF Research Database (Denmark)

Zeng, Ning; King, Anthony W.; Zaitchik, Ben

2013-01-01

A carbon sequestration strategy has recently been proposed in which a forest is actively managed, and a fraction of the wood is selectively harvested and stored to prevent decomposition. The forest serves as a ‘carbon scrubber’ or ‘carbon remover’ that provides continuous sequestration (negative ...... to be managed this way on half of the world’s forested land, or on a smaller area but with higher harvest intensity.We recommendWHS be considered part of the portfolio of climate mitigation and adaptation options that needs further research....

An optimal staggered harvesting strategy for herbaceous biomass energy crops

Energy Technology Data Exchange (ETDEWEB)

Bhat, M.G.; English, B.C. [Univ. of Tennessee, Knoxville, TN (United States)

1993-12-31

Biofuel research over the past two decades indicates lignocellulosic crops are a reliable source of feedstock for alternative energy. However, under the current technology of producing, harvesting and converting biomass crops, the cost of biofuel is not competitive with conventional biofuel. Cost of harvesting biomass feedstock is a single largest component of feedstock cost so there is a cost advantage in designing a biomass harvesting system. Traditional farmer-initiated harvesting operation causes over investment. This study develops a least-cost, time-distributed (staggered) harvesting system for example switch grass, that calls for an effective coordination between farmers, processing plant and a single third-party custom harvester. A linear programming model explicitly accounts for the trade-off between yield loss and benefit of reduced machinery overhead cost, associated with the staggered harvesting system. Total cost of producing and harvesting switch grass will decline by 17.94 percent from conventional non-staggered to proposed staggered harvesting strategy. Harvesting machinery cost alone experiences a significant reduction of 39.68 percent from moving from former to latter. The net return to farmers is estimated to increase by 160.40 percent. Per tonne and per hectare costs of feedstock production will decline by 17.94 percent and 24.78 percent, respectively. These results clearly lend support to the view that the traditional system of single period harvesting calls for over investment on agricultural machinery which escalates the feedstock cost. This social loss to the society in the form of escalated harvesting cost can be avoided if there is a proper coordination among farmers, processing plant and custom harvesters as to when and how biomass crop needs to be planted and harvested. Such an institutional arrangement benefits producers, processing plant and, in turn, end users of biofuels.

Cassava and its harvesting | La yuca y su cosecha

Directory of Open Access Journals (Sweden)

Américo Hossne García

2017-11-01

Full Text Available Cassava (Manihot esculenta Crant is one of the most important economic crops in tropical and subtropical areas. The average yield, compared to its potential, is often low. Harvesting is done with several procedures in global areas; the operation is difficult, costly and of low productivity in most regions. The primary objectives of this study were: to assess the techniques of cassava harvest under different methods, land preparation and planting, damage or break of tubers, manual and mechanized harvesting, adaptation of varieties, the effect of agronomic parameters, soil moisture during harvest, new hand tools and mechanical harvesting. The evaluation methods consisted of literature reviewing, explorations, examination of existing tools, modifications and mathematical analysis with design and calculation. As a result, an assessment is made of manual and mechanized techniques for harvesting, and recommendations are provided about mechanical properties, devices for tuber collection, genetics, seed and importance of soil moisture during harvest.

Analytical model for nonlinear piezoelectric energy harvesting devices

International Nuclear Information System (INIS)

Neiss, S; Goldschmidtboeing, F; M Kroener; Woias, P

2014-01-01

In this work we propose analytical expressions for the jump-up and jump-down point of a nonlinear piezoelectric energy harvester. In addition, analytical expressions for the maximum power output at optimal resistive load and the 3 dB-bandwidth are derived. So far, only numerical models have been used to describe the physics of a piezoelectric energy harvester. However, this approach is not suitable to quickly evaluate different geometrical designs or piezoelectric materials in the harvester design process. In addition, the analytical expressions could be used to predict the jump-frequencies of a harvester during operation. In combination with a tuning mechanism, this would allow the design of an efficient control algorithm to ensure that the harvester is always working on the oscillator's high energy attractor. (paper)

Learning and adaptation in the management of waterfowl harvests

Science.gov (United States)

Johnson, Fred A.

2011-01-01

A formal framework for the adaptive management of waterfowl harvests was adopted by the U.S. Fish and Wildlife Service in 1995. The process admits competing models of waterfowl population dynamics and harvest impacts, and relies on model averaging to compute optimal strategies for regulating harvest. Model weights, reflecting the relative ability of the alternative models to predict changes in population size, are used in the model averaging and are updated each year based on a comparison of model predictions and observations of population size. Since its inception the adaptive harvest program has focused principally on mallards (Anas platyrhynchos), which constitute a large portion of the U.S. waterfowl harvest. Four competing models, derived from a combination of two survival and two reproductive hypotheses, were originally assigned equal weights. In the last year of available information (2007), model weights favored the weakly density-dependent reproductive hypothesis over the strongly density-dependent one, and the additive mortality hypothesis over the compensatory one. The change in model weights led to a more conservative harvesting policy than what was in effect in the early years of the program. Adaptive harvest management has been successful in many ways, but nonetheless has exposed the difficulties in defining management objectives, in predicting and regulating harvests, and in coping with the tradeoffs inherent in managing multiple waterfowl stocks exposed to a common harvest. The key challenge now facing managers is whether adaptive harvest management as an institution can be sufficiently adaptive, and whether the knowledge and experience gained from the process can be reflected in higher-level policy decisions.

Classifying Sluice Occurrences in Dialogue

DEFF Research Database (Denmark)

Baird, Austin; Hamza, Anissa; Hardt, Daniel

2018-01-01

perform manual annotation with acceptable inter-coder agreement. We build classifier models with Decision Trees and Naive Bayes, with accuracy of 67%. We deploy a classifier to automatically classify sluice occurrences in OpenSubtitles, resulting in a corpus with 1.7 million occurrences. This will support....... Despite this, the corpus can be of great use in research on sluicing and development of systems, and we are making the corpus freely available on request. Furthermore, we are in the process of improving the accuracy of sluice identification and annotation for the purpose of created a subsequent version...

Evaporation of large black holes in AdS

International Nuclear Information System (INIS)

Rocha, Jorge V

2010-01-01

The AdS/CFT correspondence offers a new perspective on the long-standing black hole information paradox. However, to be able to use the available gauge/gravity machinery one is forced to consider so-called 'large' black holes in AdS, and these objects are thermodynamically stable - they do not evaporate. We describe a simple toy model that allows large AdS black holes to decay, by coupling the emitted radiation to an external scalar field propagating in an auxiliary space. This effectively changes the properties of the boundary of AdS, making it partly absorbing. We demonstrate that the evaporation process never ceases by explicitly presenting (a) the transmission coefficient for a wave scattering from the bulk into auxiliary space and (b) the greybody factor for a black 3-brane in an AdS background. Therefore, the model provides an interesting framework to address the information paradox using AdS/CFT techniques.

Spring harvest of corn stover

Energy Technology Data Exchange (ETDEWEB)

Lizotte, P.L. [Laval Univ., Quebec City, PQ (Canada). Dept. des sols et de genie agroalimentaire; Savoie, P. [Agriculture and Agri-Food Canada, Quebec City, PQ (Canada)

2010-07-01

Corn stover is typically left behind in the field after grain harvest. Although part of the stover should remain in the field for soil organic matter renewal and erosion protection, half of the stover could be removed sustainably. This represents about one million t dry matter (DM) of stover per year in the province of Quebec. Stover harvested in the fall is very wet. While there are applications for wet stover, the available markets currently require a dry product. Preliminary measurements have shown that stover left in the field throughout the winter becomes very dry, and a considerable amount would still be harvestable in the spring. In the spring of 2009, corn stover was harvested at 2 sites, each subdivided into 2 parcels. The first parcel was cut and raked in the fall of 2008 (fall parcel), while the second parcel was cut and raked in spring 2009. Fibre from both parcels was baled in the spring 2009. At the first site, a large square baler was used in late April to produce bales measuring 0.8 m x 0.9 m x 1.8 m. On the second site a round baler was used in late May to produce bales of 1.2 m in width by 1.45 m in diameter. On the second site, a small square baler was also used to produce bales of 0.35 m x 0.45 m x 0.60 m (spring cutting only). With the large square baler, an average of 3.9 t DM/ha was harvested equally on the fall parcel and the spring parcel, representing a 48 per cent recovery of biomass based on stover yields.

Thermodynamic limits of energy harvesting from outgoing thermal radiation.

Science.gov (United States)

Buddhiraju, Siddharth; Santhanam, Parthiban; Fan, Shanhui

2018-04-17

We derive the thermodynamic limits of harvesting power from the outgoing thermal radiation from the ambient to the cold outer space. The derivations are based on a duality relation between thermal engines that harvest solar radiation and those that harvest outgoing thermal radiation. In particular, we derive the ultimate limit for harvesting outgoing thermal radiation, which is analogous to the Landsberg limit for solar energy harvesting, and show that the ultimate limit far exceeds what was previously thought to be possible. As an extension of our work, we also derive the ultimate limit of efficiency of thermophotovoltaic systems.

Triboelectric effect in energy harvesting

Science.gov (United States)

Logothetis, I.; Vassiliadis, S.; Siores, E.

2017-10-01

With the development of wearable technology, much research has been undertaken in the field of flexible and stretchable electronics for use in interactive attire. The challenging problem wearable technology faces is the ability to provide energy whilst keeping the endproduct comfortable, light, ergonomic and nonintrusive. Energy harvesting, or energy scavenging as it is also known, is the process by which ambient energy is captured and converted into electric energy. The triboelectric effect converts mechanical energy into electrical energy based on the coupling effect of triboelectrification and electrostatic induction and is utilized as the basis for triboelectric generators (TEG). TEG’s are promising for energy harvesting due their high output power and efficiency in conjunction with simple and economical production. Due to the wide availability of materials and ease of integration, in order to produce the triboelectric effect such functional materials are effective for wearable energy harvesting systems. Flexible TEG’s can be built and embedded into attire, although a thorough understanding of the underlying principle of how TEG’s operate needs to be comprehended for the development and in incorporation in smart technical textiles. This paper presents results associated with TEG’S and discusses their suitability for energy harvesting in textiles structures.

Productivity and cost of harvesting a stemwood biomass product from integrated cut-to-length harvest operations in Australian Pinus radiata plantations

International Nuclear Information System (INIS)

Walsh, D.; Strandgard, M.

2014-01-01

Significant quantities of woody biomass from the tops of trees and larger woody ‘waste’ pieces that fall outside existing sawlog and pulpwood specifications are left on site post final harvest in Australian radiata Pinus radiata (D. Don) (radiata pine) plantations. Woody biomass is a potential product for pulp making or energy generation. Commercial use of woody biomass from radiata pine plantations would add extra value to the Australian plantation estate through improved resource utilisation, and potentially reduced post-harvesting silvicultural costs. This study investigated the productivity and cost impact of the harvest and extraction to roadside of woody biomass in an integrated harvest operation in a typical Australian two machine (harvester/processor and forwarder), cut-to-length, clearfall operation in a mature, thinned radiata pine plantation. The harvest operation yielded 23 GMt/ha (5% of the total yield) of woody biomass (known as ‘fibreplus’), 443 GMt/ha of sawlogs and 28 GMt/ha of pulpwood. The mean quantity of biomass left on site was 128 GMt/ha, mainly consisting of branches and needles, sufficient to minimise nutrient loss and protect the soil from erosion. Woodchips derived from the fibreplus product were suitable for kraft pulp making, (when blended in small amounts with clean de-barked roundwood woodchips), and for energy generation. The method trialed with the fibreplus product being produced did not impact harvesting and processing productivity and costs, but extraction was 14% less productive. Through analysis of the productivities of each phase and development of a cost model the harvest and extraction of the fibreplus product was estimated to increase total unit costs by ∼4.9%. - Highlights: • Study of the productivity and cost impact of producing a woody biomass product. • We compared two scenarios – harvesting with and without the biomass product. • An additional 23 GMt/ha (5% of the total yield) of woody biomass

Conceptual design of a chickpea harvesting header

Directory of Open Access Journals (Sweden)

H. Golpira

2013-07-01

Full Text Available Interest in the development of stripper headers is growing owing to the excessive losses of combine harvesters and costs of manually harvesting for chickpeas. The design of a new concept can enhance the mechanized process for chickpea harvesting. A modified stripper platform was designed, in which passive fingers with V-shape slots removes the pods from the anchored plant. The floating platform was accompanied by a reel to complete the harvesting header. Black-box modeling was used to redesign the functional operators of the header followed by an investigation of the system behavior. Physical models of the platform and reel were modified to determine the crucial variables of the header arrangement during field trials. The slot width was fixed at 40 mm, finger length at 40 mm, keyhole diameter at 10 mm and entrance width at 6 mm; the batted reel at peripheral diameter of 700 mm and speed at 50 rpm. A tractor-mounted experimental harvester was built to evaluate the work quality of the stripper header. The performance of the prototype was tested with respect to losses and results confirmed the efficiency of the modified stripper header for chickpea harvesting. Furthermore, the header with a 1.4 m working width produced the spot work rates of 0.42 ha h-1.

Wireless Energy Harvesting Using Signals from Multiple Fading Channels

KAUST Repository

Chen, Yunfei; Zhao, Nan; Alouini, Mohamed-Slim

2017-01-01

fading or Gamma-shadowed Rician fading. The received signals are then harvested by using either a single harvester for simultaneous transmissions or multiple harvesters for transmissions at different frequencies, antennas or time slots. Both linear

Photocatalytic conversion of CO2 into value-added and renewable fuels

Science.gov (United States)

Yuan, Lan; Xu, Yi-Jun

2015-07-01

The increasing energy crisis and the worsening global climate caused by the excessive utilization of fossil fuel have boosted tremendous research activities about CO2 capture, storage and utilization. Artificial photosynthesis that uses solar light energy to convert CO2 to form value-added and renewable fuels such as methane or methanol has been consistently drawing increasing attention. It is like killing two birds with one stone since it can not only reduce the greenhouse effects caused by CO2 emission but also produce value added chemicals for alternative energy supplying. This review provides a brief introduction about the basic principles of artificial photosynthesis of CO2 and the progress made in exploring more efficient photocatalysts from the viewpoint of light harvesting and photogenerated charge carriers boosting. Moreover, the undergoing mechanisms of CO2 photoreduction are discussed with selected examples, in terms of adsorption of reactants, CO2 activation as well as the possible reaction pathways. Finally, perspectives on future research directions and open issues in CO2 photoreduction are outlined.

Increasing global crop harvest frequency: recent trends and future directions

International Nuclear Information System (INIS)

Ray, Deepak K; Foley, Jonathan A

2013-01-01

The world’s agricultural systems face the challenge of meeting the rising demands from population growth, changing dietary preferences, and expanding biofuel use. Previous studies have put forward strategies for meeting this growing demand by increasing global crop production, either expanding the area under cultivation or intensifying the crop yields of our existing agricultural lands. However, another possible means for increasing global crop production has received less attention: increasing the frequency of global cropland harvested each year. Historically, many of the world’s croplands were left fallow, or had failed harvests, each year, foregoing opportunities for delivering crop production. Furthermore, many regions, particularly in the tropics, may be capable of multiple harvests per year, often more than are harvested today. Here we analyze a global compilation of agricultural statistics to show how the world’s harvested cropland has changed. Between 2000 and 2011, harvested land area grew roughly 4 times faster than total standing cropland area. Using a metric of cropland harvest frequency (CHF)—the ratio of land harvested each year to the total standing cropland—and its recent trends, we identify countries that harvest their croplands more frequently, and those that have the potential to increase their cropland harvest frequency. We suggest that a possible ‘harvest gap’ may exist in many countries that represents an opportunity to increase crop production on existing agricultural lands. However, increasing the harvest frequency of existing croplands could have significant environmental and social impacts, which need careful evaluation. (letter)

Energy harvesting from hydraulic pressure fluctuations

International Nuclear Information System (INIS)

Cunefare, K A; Skow, E A; Erturk, A; Savor, J; Verma, N; Cacan, M R

2013-01-01

State-of-the-art hydraulic hose and piping systems employ integral sensor nodes for structural health monitoring to avoid catastrophic failures. Energy harvesting in hydraulic systems could enable self-powered wireless sensor nodes for applications such as energy-autonomous structural health monitoring and prognosis. Hydraulic systems inherently have a high energy intensity associated with the mean pressure and flow. Accompanying the mean pressure is the dynamic pressure ripple, which is caused by the action of pumps and actuators. Pressure ripple is a deterministic source with a periodic time-domain behavior conducive to energy harvesting. An energy harvester prototype was designed for generating low-power electricity from pressure ripples. The prototype employed an axially-poled off-the-shelf piezoelectric stack. A housing isolated the stack from the hydraulic fluid while maintaining a mechanical coupling allowing for dynamic-pressure-induced deflection of the stack. The prototype exhibited an off-resonance energy harvesting problem since the fundamental resonance of the piezoelectric stack was much higher than the frequency content of the pressure ripple. The prototype was designed to provide a suitable power output for powering sensors with a maximum output of 1.2 mW. This work also presents electromechanical model simulations and experimental characterization of the piezoelectric power output from the pressure ripple in terms of the force transmitted into the harvester. (paper)

A novel bistable energy harvesting concept

International Nuclear Information System (INIS)

Scarselli, G; Nicassio, F; Pinto, F; Ciampa, F; Iervolino, O; Meo, M

2016-01-01

Bistable energy harvesting has become a major field of research due to some unique features for converting mechanical energy into electrical power. When properly loaded, bistable structures snap-through from one stable configuration to another, causing large strains and consequently power generation. Moreover, bistable structures can harvest energy across a broad-frequency bandwidth due to their nonlinear characteristics. Despite the fact that snap-through may be triggered regardless of the form or frequency of exciting vibration, the external force must reach a specific snap-through activation threshold value to trigger the transition from one stable state to another. This aspect is a limiting factor for realistic vibration energy harvesting application with bistable devices. This paper presents a novel power harvesting concept for bistable composites based on a ‘lever effect’ aimed at minimising the activation force to cause the snap through by choosing properly the bistable structures’ constraints. The concept was demonstrated with the help of numerical simulation and experimental testing. The results showed that the actuation force is one order of magnitude smaller (3%–6%) than the activation force of conventionally constrained bistable devices. In addition, it was shown that the output voltage was higher than the conventional configuration, leading to a significant increase in power generation. This novel concept could lead to a new generation of more efficient bistable energy harvesters for realistic vibration environments. (paper)

Classifiers based on optimal decision rules

KAUST Repository

Amin, Talha

2013-11-25

Based on dynamic programming approach we design algorithms for sequential optimization of exact and approximate decision rules relative to the length and coverage [3, 4]. In this paper, we use optimal rules to construct classifiers, and study two questions: (i) which rules are better from the point of view of classification-exact or approximate; and (ii) which order of optimization gives better results of classifier work: length, length+coverage, coverage, or coverage+length. Experimental results show that, on average, classifiers based on exact rules are better than classifiers based on approximate rules, and sequential optimization (length+coverage or coverage+length) is better than the ordinary optimization (length or coverage).

Classifiers based on optimal decision rules

KAUST Repository

Amin, Talha M.; Chikalov, Igor; Moshkov, Mikhail; Zielosko, Beata

2013-01-01

Based on dynamic programming approach we design algorithms for sequential optimization of exact and approximate decision rules relative to the length and coverage [3, 4]. In this paper, we use optimal rules to construct classifiers, and study two questions: (i) which rules are better from the point of view of classification-exact or approximate; and (ii) which order of optimization gives better results of classifier work: length, length+coverage, coverage, or coverage+length. Experimental results show that, on average, classifiers based on exact rules are better than classifiers based on approximate rules, and sequential optimization (length+coverage or coverage+length) is better than the ordinary optimization (length or coverage).

Performance Limits of Communication with Energy Harvesting

KAUST Repository

Znaidi, Mohamed Ridha

2016-01-01

In energy harvesting communications, the transmitters have to adapt transmission to the availability of energy harvested during communication. The performance of the transmission depends on the channel conditions which vary randomly due to mobility

Electronically droplet energy harvesting using piezoelectric cantilevers

KAUST Repository

Al Ahmad, Mahmoud Al; Jabbour, Ghassan E.

2012-01-01

A report is presented on free falling droplet energy harvesting using piezoelectric cantilevers. The harvester incorporates a multimorph clamped-free cantilever which is composed of five layers of lead zirconate titanate piezoelectric thick films

Enhanced aeroelastic energy harvesting by exploiting combined nonlinearities: theory and experiment

International Nuclear Information System (INIS)

Sousa, V C; De M Anicézio, M; De Marqui Jr, C; Erturk, A

2011-01-01

Converting aeroelastic vibrations into electricity for low power generation has received growing attention over the past few years. In addition to potential applications for aerospace structures, the goal is to develop alternative and scalable configurations for wind energy harvesting to use in wireless electronic systems. This paper presents modeling and experiments of aeroelastic energy harvesting using piezoelectric transduction with a focus on exploiting combined nonlinearities. An airfoil with plunge and pitch degrees of freedom (DOF) is investigated. Piezoelectric coupling is introduced to the plunge DOF while nonlinearities are introduced through the pitch DOF. A state-space model is presented and employed for the simulations of the piezoaeroelastic generator. A two-state approximation to Theodorsen aerodynamics is used in order to determine the unsteady aerodynamic loads. Three case studies are presented. First the interaction between piezoelectric power generation and linear aeroelastic behavior of a typical section is investigated for a set of resistive loads. Model predictions are compared to experimental data obtained from the wind tunnel tests at the flutter boundary. In the second case study, free play nonlinearity is added to the pitch DOF and it is shown that nonlinear limit-cycle oscillations can be obtained not only above but also below the linear flutter speed. The experimental results are successfully predicted by the model simulations. Finally, the combination of cubic hardening stiffness and free play nonlinearities is considered in the pitch DOF. The nonlinear piezoaeroelastic response is investigated for different values of the nonlinear-to-linear stiffness ratio. The free play nonlinearity reduces the cut-in speed while the hardening stiffness helps in obtaining persistent oscillations of acceptable amplitude over a wider range of airflow speeds. Such nonlinearities can be introduced to aeroelastic energy harvesters (exploiting

AdS Black Hole with Phantom Scalar Field

Directory of Open Access Journals (Sweden)

Limei Zhang

2017-01-01

Full Text Available We present an AdS black hole solution with Ricci flat horizon in Einstein-phantom scalar theory. The phantom scalar fields just depend on the transverse coordinates x and y, which are parameterized by the parameter α. We study the thermodynamics of the AdS phantom black hole. Although its horizon is a Ricci flat Euclidean space, we find that the thermodynamical properties of the black hole solution are qualitatively the same as those of AdS Schwarzschild black hole. Namely, there exists a minimal temperature and the large black hole is thermodynamically stable, while the smaller one is unstable, so there is a so-called Hawking-Page phase transition between the large black hole and the thermal gas solution in the AdS space-time in Poincare coordinates. We also calculate the entanglement entropy for a strip geometry dual to the AdS phantom black holes and find that the behavior of the entanglement entropy is qualitatively the same as that of the black hole thermodynamical entropy.

Universal regularization prescription for Lovelock AdS gravity

International Nuclear Information System (INIS)

Kofinas, Georgios; Olea, Rodrigo

2007-01-01

A definite form for the boundary term that produces the finiteness of both the conserved quantities and Euclidean action for any Lovelock gravity with AdS asymptotics is presented. This prescription merely tells even from odd bulk dimensions, regardless the particular theory considered, what is valid even for Einstein-Hilbert and Einstein-Gauss-Bonnet AdS gravity. The boundary term is a given polynomial of the boundary extrinsic and intrinsic curvatures (also referred to as Kounterterms series). Only the coupling constant of the boundary term changes accordingly, such that it always preserves a well-posed variational principle for boundary conditions suitable for asymptotically AdS spaces. The background-independent conserved charges associated to asymptotic symmetries are found. In odd bulk dimensions, this regularization produces a generalized formula for the vacuum energy in Lovelock AdS gravity. The standard entropy for asymptotically AdS black holes is recovered directly from the regularization of the Euclidean action, and not only from the first law of thermodynamics associated to the conserved quantities

AdS Branes from Partial Breaking of Superconformal Symmetries

International Nuclear Information System (INIS)

Ivanov, E.A.

2005-01-01

It is shown how the static-gauge world-volume superfield actions of diverse superbranes on the AdS d+1 superbackgrounds can be systematically derived from nonlinear realizations of the appropriate AdS supersymmetries. The latter are treated as superconformal symmetries of flat Minkowski superspaces of the bosonic dimension d. Examples include the N = 1 AdS 4 supermembrane, which is associated with the 1/2 partial breaking of the OSp(1|4) supersymmetry down to the N = 1, d = 3 Poincare supersymmetry, and the T-duality related L3-brane on AdS 5 and scalar 3-brane on AdS 5 x S 1 , which are associated with two different patterns of 1/2 breaking of the SU(2, 2|1) supersymmetry. Another (closely related) topic is the AdS/CFT equivalence transformation. It maps the world-volume actions of the codimension-one AdS d+1 (super)branes onto the actions of the appropriate Minkowski (super)conformal field theories in the dimension d

Cost, energy use and GHG emissions for forest biomass harvesting operations

International Nuclear Information System (INIS)

Zhang, Fengli; Johnson, Dana M.; Wang, Jinjiang; Yu, Chunxia

2016-01-01

For forest-based biomass to become a significant contribution to the United States' energy portfolio, harvesting operations must be physically feasible and economically viable. An assessment of cost, energy and greenhouse gas (GHG) emissions of forest biomass harvesting was conducted. The assessment differentiates harvesting systems by cut-to-length and whole tree; harvest types of 30%, 70%, and 100% cut; and forest types of hardwoods, softwoods, mixed hardwood/softwood, and softwood plantations. Harvesting cost models were developed for economic assessment and life cycle energy and emission assessment was applied to calculate energy and emissions for different harvesting scenarios, considering material and energy inputs (machinery, diesel, etc.) and outputs (GHG emissions) for each harvesting process (felling, forwarding/skidding, etc.). The developed harvesting cost models and the life cycle energy and emission assessment method were applied in Michigan, U.S. using information collected from different sources. A sensitivity analysis was performed for selected input variables for the harvesting operations in order to explore their relative importance. The results indicated that productivity had the largest impact on harvesting cost followed by machinery purchase price, yearly scheduled hours, and expected utilization. Productivity and fuel use, as well as fuel factors, are the most influential environmental impacts of harvesting operations. - Highlights: • Life cycle energy and emissions for forest biomass harvesting operations. • Harvesting cost models were developed for economic assessment. • Productivity had the largest impact on harvesting cost. • Fuel use contributes the most emissions while lubricants contribute the least.

Broadband piezoelectric energy harvesting using nonlinear magnetic forces; Bandbreitensteigerung von piezoelektrischen Energy Harvesting Systemen durch Magnetkraefte

Energy Technology Data Exchange (ETDEWEB)

Westermann, Henrik; Neubauer, Marcus; Wallaschek, Joerg [Hannover Univ. (Germany). Inst. fuer Dynamik und Schwingungen

2012-07-15

Using ambient energy by piezoelectric energy harvesting systems received much attention over the last years. Most vibration-based generators produce a sufficient power only if the transducer is excited in its resonance frequency. The use of magnetic forces suggests a promising strategy to increase the efficiency. This paper presents different ways for broadband piezoelectric energy harvesting using nonlinear magnetic forces. (orig.)

Design guidelines of triboelectric nanogenerator for water wave energy harvesters

KAUST Repository

Ahmed, Abdelsalam

2017-04-11

Ocean waves are one of the cleanest and most abundant energy sources on earth, and wave energy has the potential for future power generation. Triboelectric nanogenerator (TENG) technology has recently been proposed as a promising technology to harvest wave energy. In this paper, a theoretical study is performed on a duck-shaped TENG wave harvester recently introduced in our work. To enhance the design of the duck-shaped TENG wave harvester, the mechanical and electrical characteristics of the harvester\\'s overall structure, as well as its inner configuration, are analyzed, respectively, under different wave conditions, to optimize parameters such as duck radius and mass. Furthermore, a comprehensive hybrid 3D model is introduced to quantify the performance of the TENG wave harvester. Finally, the influence of different TENG parameters is validated by comparing the performance of several existing TENG wave harvesters. This study can be applied as a guideline for enhancing the performance of TENG wave energy harvesters.

Piezoelectric energy harvesting

International Nuclear Information System (INIS)

Howells, Christopher A

2009-01-01

Piezoelectric materials can be used to convert oscillatory mechanical energy into electrical energy. This technology, together with innovative mechanical coupling designs, can form the basis for harvesting energy from mechanical motion. Piezoelectric energy can be harvested to convert walking motion from the human body into electrical power. Recently four proof-of-concept Heel Strike Units were developed where each unit is essentially a small electric generator that utilizes piezoelectric elements to convert mechanical motion into electrical power in the form factor of the heel of a boot. The results of the testing and evaluation and the performance of this small electric generator are presented. The generator's conversion of mechanical motion into electrical power, the processes it goes through to produce useable power and commercial applications of the Heel Strike electric generator are discussed.

AdS2 models in an embedding superspace

International Nuclear Information System (INIS)

McKeon, D.G.C.; Sherry, T.N.

2003-01-01

An embedding superspace, whose bosonic part is the flat (2+1)-dimensional embedding space for AdS 2 , is introduced. Superfields and several supersymmetric models are examined in the embedded AdS 2 superspace

A new piezoelectric energy harvesting design concept: multimodal energy harvesting skin.

Science.gov (United States)

Lee, Soobum; Youn, Byeng D

2011-03-01

This paper presents an advanced design concept for a piezoelectric energy harvesting (EH), referred to as multimodal EH skin. This EH design facilitates the use of multimodal vibration and enhances power harvesting efficiency. The multimodal EH skin is an extension of our previous work, EH skin, which was an innovative design paradigm for a piezoelectric energy harvester: a vibrating skin structure and an additional thin piezoelectric layer in one device. A computational (finite element) model of the multilayered assembly - the vibrating skin structure and piezoelectric layer - is constructed and the optimal topology and/or shape of the piezoelectric layer is found for maximum power generation from multiple vibration modes. A design rationale for the multimodal EH skin was proposed: designing a piezoelectric material distribution and external resistors. In the material design step, the piezoelectric material is segmented by inflection lines from multiple vibration modes of interests to minimize voltage cancellation. The inflection lines are detected using the voltage phase. In the external resistor design step, the resistor values are found for each segment to maximize power output. The presented design concept, which can be applied to any engineering system with multimodal harmonic-vibrating skins, was applied to two case studies: an aircraft skin and a power transformer panel. The excellent performance of multimodal EH skin was demonstrated, showing larger power generation than EH skin without segmentation or unimodal EH skin.

Robust Framework to Combine Diverse Classifiers Assigning Distributed Confidence to Individual Classifiers at Class Level

Directory of Open Access Journals (Sweden)

Shehzad Khalid

2014-01-01

Full Text Available We have presented a classification framework that combines multiple heterogeneous classifiers in the presence of class label noise. An extension of m-Mediods based modeling is presented that generates model of various classes whilst identifying and filtering noisy training data. This noise free data is further used to learn model for other classifiers such as GMM and SVM. A weight learning method is then introduced to learn weights on each class for different classifiers to construct an ensemble. For this purpose, we applied genetic algorithm to search for an optimal weight vector on which classifier ensemble is expected to give the best accuracy. The proposed approach is evaluated on variety of real life datasets. It is also compared with existing standard ensemble techniques such as Adaboost, Bagging, and Random Subspace Methods. Experimental results show the superiority of proposed ensemble method as compared to its competitors, especially in the presence of class label noise and imbalance classes.

African Urban Harvest

International Development Research Centre (IDRC) Digital Library (Canada)

Urban Harvest, a system-wide initiative of the Consultative Group on Agricultural ...... and urban old, using criteria of population density, land availability, and the prevalence of crop ...... Contact between milk and containers or the environment;.

AdS. Klein-Gordon equation

OpenAIRE

Bel, Ll.

2014-01-01

I propose a generalization of the Klein-Gordon equation in the framework of AdS space-time and exhibit a four parameter family of solutions among which there is a two parameter family of time-dependent bound states.

Baby Skyrmions in AdS

Energy Technology Data Exchange (ETDEWEB)

Elliot-Ripley, Matthew; Winyard, Thomas [Department of Mathematical Sciences, Durham University,South Rd, Durham (United Kingdom)

2015-09-01

We study the baby Skyrme model in a pure AdS background without a mass term. The tail decays and scalings of massless radial solutions are demonstrated to take a similar form to those of the massive flat space model, with the AdS curvature playing a similar role to the flat space pion mass. We also numerically find minimal energy solutions for a range of higher topological charges and find that they form concentric ring-like solutions. Popcorn transitions (named in analogy with studies of toy models of holographic QCD) from an n layer to an n+1-layer configuration are observed at topological charges 9 and 27 and further popcorn transitions for higher charges are predicted. Finally, a point-particle approximation for the model is derived and used to successfully predict the ring structures and popcorn transitions for higher charge solitons.

Harvester operator learnig efficiency analysis

OpenAIRE

Malovrh, Špela; Košir, Boštjan; Krč, Janez

2004-01-01

The article considers the possibilities of training future harvester operators. The course of learning with a simulator is described and analysed on the first such example in Slovenia. The times of individual processes are measured in two candidates. The paper describes the operation of a learning simulator for work on the harvester Timberjack 1270 D and the proceedings of aone-week course. A comparison between candidates regarding the consumption oftime and number of damages to the virtual m...

Nyala and Bushbuck II: A Harvesting Model.

Science.gov (United States)

Fay, Temple H.; Greeff, Johanna C.

1999-01-01

Adds a cropping or harvesting term to the animal overpopulation model developed in Part I of this article. Investigates various harvesting strategies that might suggest a solution to the overpopulation problem without actually culling any animals. (ASK)

Wess-Zumino terms for AdS D-branes

International Nuclear Information System (INIS)

Hatsuda, Machiko; Kamimura, Kiyoshi

2004-01-01

We show that Wess-Zumino terms for Dp branes with p>0 in the anti-de Sitter (AdS) space are given in terms of 'left-invariant' currents on the super-AdS group or the 'expanded' super-AdS group. As a result there is no topological extension of the super-AdS algebra. In the flat limit the global Lorentz rotational charges of the AdS space turn out to be brane charges of the supertranslation algebra representing the BPS mass. We also show that a D-instanton is described by the GL(1) degree of freedom in the Roiban-Siegel formalism based on the GL(4 vertical bar 4)/[Sp(4)xGL(1)]2 coset

Chemical desiccation for early harvest in soybean cultivars

Directory of Open Access Journals (Sweden)

Tamara Pereira

2015-08-01

Full Text Available The use of desiccants is an alternative to anticipate the soybean harvest and keep the physiological quality of seed. The objective of this work was to assess the production performance and germination seeds in response to differents stages and desiccation chemicals products to early harvest of soybean cultivars. The experiment was conducted in Campos Novos, in two harvests, it was used a randomized complete block design disposed in split-split-plots. Two phenological stages of application (stage R7.1 and R7.3 were tested in the main plot. Five soybean cultivars (NA 5909 RG, CD 2585 RR, BMX Turbo RR, SYN 1059 RR and BENSO 1RR were evaluated in the subplots, and three desiccants ammonium glufosinate, paraquat, carfentrazone-ethyl in the 2011/12 season and one control (without the desiccant application were evaluated in the sub-subplots. In the 2012/13 season the carfentrazone-ethyl was substituted by diquat. It were evaluated the number of the days in the early harvest, yield, number of pods per plant, number of seeds per pod, mass of 100 seeds and germination percentage. The chemical dessecation with the use of glufosinate ammonium and paraquat applied in R7.1 stage allowed to anticipate the harvest in six days (2011/12 and provided maintenance germination percentage (90% and 92% compared to control (76%. The dessecation didn’t influence negatively on seeds productivity, but reduced the mass of seeds in the two growing seasons, and early harvest was dependent of pre-harvest rain absence, with this preamble. The use of dessicants is a possibility of early harvest in production field of soybean seeds.

Energy harvesting devices for harvesting energy from terahertz electromagnetic radiation

Science.gov (United States)

Novack, Steven D.; Kotter, Dale K.; Pinhero, Patrick J.

2012-10-09

Methods, devices and systems for harvesting energy from electromagnetic radiation are provided including harvesting energy from electromagnetic radiation. In one embodiment, a device includes a substrate and one or more resonance elements disposed in or on the substrate. The resonance elements are configured to have a resonant frequency, for example, in at least one of the infrared, near-infrared and visible light spectra. A layer of conductive material may be disposed over a portion of the substrate to form a ground plane. An optical resonance gap or stand-off layer may be formed between the resonance elements and the ground plane. The optical resonance gap extends a distance between the resonance elements and the layer of conductive material approximately one-quarter wavelength of a wavelength of the at least one resonance element's resonant frequency. At least one energy transfer element may be associated with the at least one resonance element.

Experimental study of energy harvesting in UHF band

International Nuclear Information System (INIS)

Bernacki, Ł; Gozdur, R; Salamon, N

2016-01-01

A huge progress of down-sizing technology together with trend of decreasing power consumption and, on the other hand, increasing efficiency of electronics give the opportunity to design and to implement the energy harvesters as main power sources. This paper refers to the energy that can be harvested from electromagnetic field in the unlicensed frequency bands. The paper contains description of the most popular techniques and transducers that can be applied in energy harvesting domain. The overview of current research and commercial solutions was performed for bands in ultra-high frequency range, which are unlicensed and where transmission is not limited by administrative arrangements. During the experiments with Powercast’s receiver, the same bands as sources of electromagnetic field were taken into account. This power source is used for conducting radio-communication process and excess energy could be used for powering the extra electronic circuits. The paper presents elaborated prototype of energy harvesting system and the measurements of power harvested in ultra-high frequency range. The evaluation of RF energy harvesters for powering ultra-low power (ULP) electronic devices was performed based on survey and results of the experiments. (paper)

Pen harvester for powering a pulse rate sensor

International Nuclear Information System (INIS)

Bedekar, Vishwas; Oliver, Josiah; Priya, Shashank

2009-01-01

Rapid developments in the area of micro-sensors for various applications such as structural health monitoring, bio-chemical sensors and pressure sensors have increased the demand for portable, low cost, high efficiency energy harvesting devices. In this paper, we describe the scheme for powering a pulse rate sensor with a vibration energy harvester integrated inside a pen commonly carried by humans in the pocket close to the heart. Electromagnetic energy harvesting was selected in order to achieve high power at lower frequencies. The prototype pen harvester was found to generate 3 mW at 5 Hz and 1 mW at 3.5 Hz operating under displacement amplitude of 16 mm (corresponding to an acceleration of approximately 1.14 g rms at 5 Hz and 0.56 g rms at 3.5 Hz, respectively). A comprehensive mathematical modelling and simulations were performed in order to optimize the performance of the vibration energy harvester. The integrated pen harvester prototype was found to generate continuous power of 0.46-0.66 mW under normal human actions such as jogging and jumping which is enough for a small scale pulse rate sensor.

EU mitigation potential of harvested wood products.

Science.gov (United States)

Pilli, Roberto; Fiorese, Giulia; Grassi, Giacomo

2015-12-01

The new rules for the Land Use, Land Use Change and Forestry sector under the Kyoto Protocol recognized the importance of Harvested Wood Products (HWP) in climate change mitigation. We used the Tier 2 method proposed in the 2013 IPCC KP Supplement to estimate emissions and removals from HWP from 1990 to 2030 in EU-28 countries with three future harvest scenarios (constant historical average, and +/-20% in 2030). For the historical period (2000-2012) our results are consistent with other studies, indicating a HWP sink equal on average to -44.0 Mt CO 2 yr -1 (about 10% of the sink by forest pools). Assuming a constant historical harvest scenario and future distribution of the total harvest among each commodity, the HWP sink decreases to -22.9 Mt CO 2 yr -1 in 2030. The increasing and decreasing harvest scenarios produced a HWP sink of -43.2 and -9.0 Mt CO 2 yr -1 in 2030, respectively. Other factors may play an important role on HWP sink, including: (i) the relative share of different wood products, and (ii) the combined effect of production, import and export on the domestic production of each commodity. Maintaining a constant historical harvest, the HWP sink will slowly tend to saturate, i.e. to approach zero in the long term. The current HWP sink will be maintained only by further increasing the current harvest; however, this will tend to reduce the current sink in forest biomass, at least in the short term. Overall, our results suggest that: (i) there is limited potential for additional HWP sink in the EU; (ii) the HWP mitigation potential should be analyzed in conjunction with other mitigation components (e.g. sink in forest biomass, energy and material substitution by wood).

76 FR 34761 - Classified National Security Information

Science.gov (United States)

2011-06-14

... MARINE MAMMAL COMMISSION Classified National Security Information [Directive 11-01] AGENCY: Marine... Commission's (MMC) policy on classified information, as directed by Information Security Oversight Office... of Executive Order 13526, ``Classified National Security Information,'' and 32 CFR part 2001...

MEMS-based thick film PZT vibrational energy harvester

DEFF Research Database (Denmark)

Lei, Anders; Xu, Ruichao; Thyssen, Anders

2011-01-01

We present a MEMS-based unimorph silicon/PZT thick film vibrational energy harvester with an integrated proof mass. We have developed a process that allows fabrication of high performance silicon based energy harvesters with a yield higher than 90%. The process comprises a KOH etch using a mechan......We present a MEMS-based unimorph silicon/PZT thick film vibrational energy harvester with an integrated proof mass. We have developed a process that allows fabrication of high performance silicon based energy harvesters with a yield higher than 90%. The process comprises a KOH etch using...... a mechanical front side protection of an SOI wafer with screen printed PZT thick film. The fabricated harvester device produces 14.0 μW with an optimal resistive load of 100 kΩ from 1g (g=9.81 m s-2) input acceleration at its resonant frequency of 235 Hz....

Hybrid energy harvesting using active thermal backplane

Science.gov (United States)

Kim, Hyun-Wook; Lee, Dong-Gun

2016-04-01

In this study, we demonstrate the concept of a new hybrid energy harvesting system by combing solar cells with magneto-thermoelectric generator (MTG, i.e., thermal energy harvesting). The silicon solar cell can easily reach high temperature under normal operating conditions. Thus the heated solar cell becomes rapidly less efficient as the temperature of solar cell rises. To increase the efficiency of the solar cell, air or water-based cooling system is used. To surpass conventional cooling devices requiring additional power as well as large working space for air/water collectors, we develop a new technology of pairing an active thermal backplane (ATB) to solar cell. The ATB design is based on MTG technology utilizing the physics of the 2nd order phase transition of active ferromagnetic materials. The MTG is cost-effective conversion of thermal energy to electrical energy and is fundamentally different from Seebeck TEG devices. The ATB (MTG) is in addition to being an energy conversion system, a very good conveyor of heat through both conduction and convection. Therefore, the ATB can provide dual-mode for the proposed hybrid energy harvesting. One is active convective and conductive cooling for heated solar cell. Another is active thermal energy harvesting from heat of solar cell. These novel hybrid energy harvesting device have potentially simultaneous energy conversion capability of solar and thermal energy into electricity. The results presented can be used for better understanding of hybrid energy harvesting system that can be integrated into commercial applications.

Felling and skidding productivity and harvesting cost in southern pine forests

Science.gov (United States)

R.A. Kluender; B.J. Stokes

1996-01-01

Sixteen stands were harvested at various levels of basal area removed (intensity). Chainsaw felling productivity was more sensitive to stem diameter than harvest intensity. Skidding productivity was highest when removing large trees at high intensity. Harvesting cost was more sensitive to stem size than harvest intensity, although harvest intensity was a very important...

Error minimizing algorithms for nearest eighbor classifiers

Energy Technology Data Exchange (ETDEWEB)

Porter, Reid B [Los Alamos National Laboratory; Hush, Don [Los Alamos National Laboratory; Zimmer, G. Beate [TEXAS A& M

2011-01-03

Stack Filters define a large class of discrete nonlinear filter first introd uced in image and signal processing for noise removal. In recent years we have suggested their application to classification problems, and investigated their relationship to other types of discrete classifiers such as Decision Trees. In this paper we focus on a continuous domain version of Stack Filter Classifiers which we call Ordered Hypothesis Machines (OHM), and investigate their relationship to Nearest Neighbor classifiers. We show that OHM classifiers provide a novel framework in which to train Nearest Neighbor type classifiers by minimizing empirical error based loss functions. We use the framework to investigate a new cost sensitive loss function that allows us to train a Nearest Neighbor type classifier for low false alarm rate applications. We report results on both synthetic data and real-world image data.

Assessment of rainwater harvesting potential using GIS

Science.gov (United States)

Hari, Durgasrilakshmi; Ramamohan Reddy, K.; Vikas, Kola; Srinivas, N.; Vikas, G.

2018-03-01

Rainwater harvesting (RWH) is one of the best practices to overcome the scarcity of water. Rainwater harvesting involves collection and storage of rainwater locally through different technologies, for future use. It is also useful for livestock, groundwater recharge and for irrigation practices. Potential of rainwater harvesting refers to the capacity of an individual catchment that harnesses the water falling on the catchment during a particular year considering all rainy days. The present study deals with the identification of the study area boundary and marking it as a Polygon in Google Earth Pro Later, Rooftops of various house entities and roads were digitized using the Polygon command in Google Earth Pro. GIS technique is employed for locating boundaries of the study area and for calculating the areas of various types of rooftops and roads. With the application of GIS, it is possible to assess the total potential of water that can be harvested. The present study will enable us to identify the suitable type of water harvesting structure along with the number of structures required. It is extremely an ideal and effective solution to overcome the water crisis through water conservation in the study area.

Production economics of harvesting young hardwood stands in central Appalachia

Science.gov (United States)

Yaoxiang Li; Jingxin Wang; Gary W. Miller; Joe McNeel

2004-01-01

Three harvesting systems of chainsaw/cable skidder, fell-buncher/grapple skidder, and harvester/forwarder were simulated in harvesting three hardwood stands of 30 to 50 years old in central Appalachia. Stands were generated by using a stand generator and harvesting prescriptions included clearcut, shelterwood cut, selective cut, diameter limit cut, and crop tree...

The case for energy harvesting on wildlife in flight

International Nuclear Information System (INIS)

Shafer, Michael W; MacCurdy, Robert; Garcia, Ephrahim; Shipley, J Ryan; Winkler, David; Guglielmo, Christopher G

2015-01-01

The confluence of advancements in microelectronic components and vibrational energy harvesting has opened the possibility of remote sensor units powered solely from the motion of their hosts. There are numerous applications of such systems, including the development of modern wildlife tracking/data-logging devices. These ‘bio-logging’ devices are typically mass-constrained because they must be carried by an animal. Thus, they have historically traded scientific capability for operational longevity due to restrictions on battery size. Recently, the precipitous decrease in the power requirements of microelectronics has been accompanied by advancements in the area of piezoelectric vibrational energy harvesting. These energy harvesting devices are now capable of powering the type of microelectronic circuits used in bio-logging devices. In this paper we consider the feasibility of employing these vibrational energy harvesters on flying vertebrates for the purpose of powering a bio-logging device. We show that the excess energy available from birds and bats could be harvested without adversely affecting their overall energy budget. We then present acceleration measurements taken on flying birds in a flight tunnel to understand modulation of flapping frequency during steady flight. Finally, we use a recently developed method of estimating the maximum power output from a piezoelectric energy harvester to determine the amount of power that could be practically harvested from a flying bird. The results of this analysis show that the average power output of a piezoelectric energy harvester mounted to a bird or bat could produce more than enough power to run a bio-logging device. We compare the power harvesting capabilities to the energy requirements of an example system and conclude that vibrational energy harvesting on flying birds and bats is viable and warrants further study, including testing. (paper)

Aggregation Operator Based Fuzzy Pattern Classifier Design

DEFF Research Database (Denmark)

Mönks, Uwe; Larsen, Henrik Legind; Lohweg, Volker

2009-01-01

This paper presents a novel modular fuzzy pattern classifier design framework for intelligent automation systems, developed on the base of the established Modified Fuzzy Pattern Classifier (MFPC) and allows designing novel classifier models which are hardware-efficiently implementable....... The performances of novel classifiers using substitutes of MFPC's geometric mean aggregator are benchmarked in the scope of an image processing application against the MFPC to reveal classification improvement potentials for obtaining higher classification rates....

Analysis of Passive RF-DC Power Rectification and Harvesting Wireless RF Energy for Micro-watt Sensors

Directory of Open Access Journals (Sweden)

Antwi Nimo

2015-04-01

Full Text Available In this paper, analytical modeling of passive rectifying circuits and the harvesting of electromagnetic (EM power from intentionally generated as well as from ubiquitous sources are presented. The presented model is based on the linearization of rectifying circuits. The model provides an accurate method of determining the output characteristics of rectifying circuits. The model was verified with Advance Design System (ADS Harmonic balance (HB simulations and measurements. The results from the presented model were in agreement with simulations and measurements. Consequently design considerations and trade-off of radio frequency (RF harvesters are discussed. To verify the exploitation of ambient RF power sources for operation of sensors, a dual-band antenna with a size of ~λ/4 at 900MHz and a passive dual-band rectifier that is able to power a commercial Thermo-Hygrometer requiring ~1.3V and 0.5MΩ from a global system for mobile communications (GSM base station is demonstrated. The RF power delivered by the receiving dual-band antenna at a distance of about 110 m from the GSM base station ranges from -27 dBm to -50 dBm from the various GSM frequency bands. Additionally, wireless range measurements of the RF harvesters in the industrial, scientific and medical (ISM band 868MHz is presented at indoor conditions.

Nanoscale piezoelectric vibration energy harvester design

Science.gov (United States)

Foruzande, Hamid Reza; Hajnayeb, Ali; Yaghootian, Amin

2017-09-01

Development of new nanoscale devices has increased the demand for new types of small-scale energy resources such as ambient vibrations energy harvesters. Among the vibration energy harvesters, piezoelectric energy harvesters (PEHs) can be easily miniaturized and fabricated in micro and nano scales. This change in the dimensions of a PEH leads to a change in its governing equations of motion, and consequently, the predicted harvested energy comparing to a macroscale PEH. In this research, effects of small scale dimensions on the nonlinear vibration and harvested voltage of a nanoscale PEH is studied. The PEH is modeled as a cantilever piezoelectric bimorph nanobeam with a tip mass, using the Euler-Bernoulli beam theory in conjunction with Hamilton's principle. A harmonic base excitation is applied as a model of the ambient vibrations. The nonlocal elasticity theory is used to consider the size effects in the developed model. The derived equations of motion are discretized using the assumed-modes method and solved using the method of multiple scales. Sensitivity analysis for the effect of different parameters of the system in addition to size effects is conducted. The results show the significance of nonlocal elasticity theory in the prediction of system dynamic nonlinear behavior. It is also observed that neglecting the size effects results in lower estimates of the PEH vibration amplitudes. The results pave the way for designing new nanoscale sensors in addition to PEHs.

NUTRIENT BALANCE IN WATER HARVESTING SOILS

Directory of Open Access Journals (Sweden)

Díaz, F

2005-05-01

Full Text Available Dryland farming on Fuerteventura and Lanzarote (Canary Islands, Spain, which has an annual rainfall of less than 150 mm/year, has been based traditionally on water harvesting techniques (known locally as “gavias”. Periods of high productivity alternate with those of very low yield. The systems are sustainable in that they reduce erosive processes, contribute to soil and soil-water conservation and are largely responsible for maintaining the soil’s farming potential. In this paper we present the chemical fertility status and nutrient balance of soils in five “gavia” systems. The results are compared with those obtained in adjacent soils where this water harvesting technique is not used. The main crops are wheat, barley, maize, lentils and chick-peas. Since neither organic nor inorganic fertilisers are used, nutrients are derived mainly from sediments carried by runoff water. Nutrients are lost mainly through crop harvesting and harvest residues. The soils where water harvesting is used have lower salt and sodium in the exchange complex, are higher in carbon, nitrogen, copper and zinc and have similar phosphorous and potassium content. It is concluded that the systems improve the soil’s natural fertility and also that natural renovation of nutrients occurs thanks to the surface deposits of sediments, which mix with the arable layer. The system helps ensure adequate fertility levels, habitual in arid regions, thus allowing dryland farming to be carried out.

The role of the Business Environment in Harvesting Strategies

Directory of Open Access Journals (Sweden)

Deidré van Rooyen

2010-12-01

Full Text Available Harvesting is made up of many different strategies that can be used by entrepreneurs to exit their business. This is a long-term ambition to create real value to the business. In Beaufort West, a uranium mining development is going to take place and thus create opportunities for existing and new businesses. This study investigates how the changing business environment will influence this harvesting choice made by the entrepreneur. Recommendations indicate that entrepreneurs need more information and training regarding the specific harvesting concept and strategies that are available, because no specific harvesting strategy was noted as important by the entrepreneurial respondents. Keywords and phrases: business environment; harvesting; exit; business; entrepreneur; uranium

Survival models for harvest management of mourning dove populations

Science.gov (United States)

Otis, D.L.

2002-01-01

Quantitative models of the relationship between annual survival and harvest rate of migratory game-bird populations are essential to science-based harvest management strategies. I used the best available band-recovery and harvest data for mourning doves (Zenaida macroura) to build a set of models based on different assumptions about compensatory harvest mortality. Although these models suffer from lack of contemporary data, they can be used in development of an initial set of population models that synthesize existing demographic data on a management-unit scale, and serve as a tool for prioritization of population demographic information needs. Credible harvest management plans for mourning dove populations will require a long-term commitment to population monitoring and iterative population analysis.

Classifying Sources Influencing Indoor Air Quality (IAQ Using Artificial Neural Network (ANN

Directory of Open Access Journals (Sweden)

Shaharil Mad Saad

2015-05-01

Full Text Available Monitoring indoor air quality (IAQ is deemed important nowadays. A sophisticated IAQ monitoring system which could classify the source influencing the IAQ is definitely going to be very helpful to the users. Therefore, in this paper, an IAQ monitoring system has been proposed with a newly added feature which enables the system to identify the sources influencing the level of IAQ. In order to achieve this, the data collected has been trained with artificial neural network or ANN—a proven method for pattern recognition. Basically, the proposed system consists of sensor module cloud (SMC, base station and service-oriented client. The SMC contain collections of sensor modules that measure the air quality data and transmit the captured data to base station through wireless network. The IAQ monitoring system is also equipped with IAQ Index and thermal comfort index which could tell the users about the room’s conditions. The results showed that the system is able to measure the level of air quality and successfully classify the sources influencing IAQ in various environments like ambient air, chemical presence, fragrance presence, foods and beverages and human activity.

Harvesting options of small-diameter wood from early thinnings

Energy Technology Data Exchange (ETDEWEB)

Kaerhae, K.; Petty, A. (Metsaeteho Oy, Helsinki (Finland)), e-mail: kalle.karha@metsateho.fi; Mutikainen, A. (TTS Research, Rajamaeki (Finland)), e-mail: arto.mutikainen@tts.fi

2010-07-01

The integrated harvesting of industrial roundwood and energy wood by the so-called 'two-pile cutting method' has increased steadily in young forests in Finland during the last three years. The studies carried out by Metsaeteho Oy and TTS Research (i) determined the time consumption and productivity in cutting work when using the integrated cutting of first-thinning wood, (ii) clarified the development of the total removal in integrated harvesting operation, and (iii) investigated the quality of pulpwood poles when using integrated cutting with multi-tree handling. The studies indicated that the total removal in integrated wood harvesting increase significantly compared to that of conventional, separate roundwood harvesting. When the total removal from the harvesting site increased considerable, there was a significant increase in the productivity of cutting work in integrated wood harvesting compared to the situation in separate pulpwood harvesting. In addition, the delimbing quality and bucking accuracy of the pulpwood poles obtained in multi-tree processing were comparable to those produced in single-tree handling. There were no problems with measuring the work output by a weight scale attached to the crane of the forwarder. As the studies indicated very promising results with integrated wood cutting, integrated harvesting is likely to continue to increase in both first and later thinnings in Finland. (orig.)

Energy harvesting for human wearable and implantable bio-sensors.

Science.gov (United States)

Mitcheson, Paul D

2010-01-01

There are clear trade-offs between functionality, battery lifetime and battery volume for wearable and implantable wireless-biosensors which energy harvesting devices may be able to overcome. Reliable energy harvesting has now become a reality for machine condition monitoring and is finding applications in chemical process plants, refineries and water treatment works. However, practical miniature devices that can harvest sufficient energy from the human body to power a wireless bio-sensor are still in their infancy. This paper reviews the options for human energy harvesting in order to determine power availability for harvester-powered body sensor networks. The main competing technologies for energy harvesting from the human body are inertial kinetic energy harvesting devices and thermoelectric devices. These devices are advantageous to some other types as they can be hermetically sealed. In this paper the fundamental limit to the power output of these devices is compared as a function of generator volume when attached to a human whilst walking and running. It is shown that the kinetic energy devices have the highest fundamental power limits in both cases. However, when a comparison is made between the devices using device effectivenesses figures from previously demonstrated prototypes presented in the literature, the thermal device is competitive with the kinetic energy harvesting device when the subject is running and achieves the highest power density when the subject is walking.

OPERATIONALANALYSIS OF MECHANICAL CUT-TO-LENGTH FOREST HARVESTING SYSTEM

Directory of Open Access Journals (Sweden)

Nilton Cesar Fiedler

2017-08-01

Full Text Available ABSTRACT The objective of this research was to conduct an operational analysis of forest harvesting activities in a mechanized of the system cut to length in eucalypt plantations in south of Bahia, to determine the distribution of operation times, productivity, operational efficiency and mechanical availability of two models of harvester and two models of forwarder, evaluating these machines in three modules harvesting methodology through time and motion studies. Auxiliary activities corresponded to the lowest percentages within the operating times (mean 1.9% to 1.8% for harvester and forwarder, already operating activities were those that had the highest percentages. The first shift was presented the worst results of operations for the harvester (average 66.3% and the third shift for the forwarder (55.5%. For the harvester module 1 showed the best result of productive times (average 70.36%. In relation to the forwarder, this same module showed the worst results with unproductive times (average of 22.17%. The availability and mechanical parameters were superior productivity for the forwarder (mean 82.31% and 51.33 m3/h, respectively, as indicators of degree of utilization and operational efficiency were higher in harvester (average 85.01% and 66.41%, respectively. Thus, for the forwarder, the parameters mechanical availability and productivity were higher, while for the harvester, they were the indicators of degree of utilization and operational efficiency

The group approach to AdS space propagators

International Nuclear Information System (INIS)

Leonhardt, Thorsten; Manvelyan, Ruben; Ruehl, Werner

2003-01-01

We show that AdS two-point functions can be obtained by connecting two points in the interior of AdS space with one point on its boundary by a dual pair of Dobrev's boundary-to-bulk intertwiners and integrating over the boundary point

Removal intensity and tree size effects on harvesting cost and profitability

Science.gov (United States)

R. Kluender; D. Lortz; W. McCoy; B. Stokes; J. Klepac

1997-01-01

Sixteen stands were harvested at intensities (proportion of basal area removed) ranging from 0.27 to 1.00. Logging contractors used chain saws and rubber-tired skidders. Harvested sites were similar in slope and tree size. Harvest cost per hundred cubic feet of wood (CCF) was inversely related to harvest intensity and tree size. Harvesting profitability per CCF was...

Heading Estimation of Robot Combine Harvesters during Turning Maneuveres.

Science.gov (United States)

Rahman, Md Mostafizar; Ishii, Kazunobu

2018-05-01

Absolute heading is an important parameter for a robot combine harvester or a robot tracked combine harvester, especially while it is turning, but due to the rapid turning of robot combine harvesters, its inertial measurement unit gives a gyro measurement bias that causes heading drift. Our research goal is to estimate the absolute heading of robot combine harvesters by compensating this gyro measurement bias during non-linear turning maneuvers. A sensor fusion method like the extended Kalman filter combined with the tracked combine harvester dynamic model and sensor measurements was used to estimate the absolute heading of a robot combine harvester. Circular, sinusoidal and concave shapes were used to evaluate the estimated heading produced by the sensor fusion method. The results indicate that the estimated heading is better than measured heading which was calculated from the integration of yaw rate gyro measurements, and the root mean square errors (RMSEs) for estimated headings are smaller than the measured headings. In practics, the target of this paper is thus the estimation of a heading or absolute heading that is bias compensated, and can be further used to calculate the exact crop periphery for automatic path planning of robot combine harvesters.

Recent Progress on PZT Based Piezoelectric Energy Harvesting Technologies

Directory of Open Access Journals (Sweden)

Min-Gyu Kang

2016-02-01

Full Text Available Energy harvesting is the most effective way to respond to the energy shortage and to produce sustainable power sources from the surrounding environment. The energy harvesting technology enables scavenging electrical energy from wasted energy sources, which always exist everywhere, such as in heat, fluids, vibrations, etc. In particular, piezoelectric energy harvesting, which uses a direct energy conversion from vibrations and mechanical deformation to the electrical energy, is a promising technique to supply power sources in unattended electronic devices, wireless sensor nodes, micro-electronic devices, etc., since it has higher energy conversion efficiency and a simple structure. Up to now, various technologies, such as advanced materials, micro- and macro-mechanics, and electric circuit design, have been investigated and emerged to improve performance and conversion efficiency of the piezoelectric energy harvesters. In this paper, we focus on recent progress of piezoelectric energy harvesting technologies based on PbZrxTi1-xO3 (PZT materials, which have the most outstanding piezoelectric properties. The advanced piezoelectric energy harvesting technologies included materials, fabrications, unique designs, and properties are introduced to understand current technical levels and suggest the future directions of piezoelectric energy harvesting.

NMR-Based Metabolomic Study on Isatis tinctoria: Comparison of Different Accessions, Harvesting Dates, and the Effect of Repeated Harvesting.

Science.gov (United States)

Guldbrandsen, Niels; Kostidis, Sarantos; Schäfer, Hartmut; De Mieri, Maria; Spraul, Manfred; Skaltsounis, Alexios-Leandros; Mikros, Emmanuel; Hamburger, Matthias

2015-05-22

Isatis tinctoria is an ancient dye and medicinal plant with potent anti-inflammatory and antiallergic properties. Metabolic differences were investigated by NMR spectroscopy of accessions from different origins that were grown under identical conditions on experimental plots. For these accessions, metabolite profiles at different harvesting dates were analyzed, and single and repeatedly harvested plants were compared. Leaf samples were shock-frozen in liquid N2 immediately after being harvested, freeze-dried, and cryomilled prior to extraction. Extracts were prepared by pressurized liquid extraction with ethyl acetate and 70% aqueous methanol. NMR spectra were analyzed using a combination of different methods of multivariate data analysis such as principal component analysis (PCA), canonical analysis (CA), and k-nearest neighbor concept (k-NN). Accessions and harvesting dates were well separated in the PCA/CA/k-NN analysis in both extracts. Pairwise statistical total correlation spectroscopy (STOCSY) revealed unsaturated fatty acids, porphyrins, carbohydrates, indole derivatives, isoprenoids, phenylpropanoids, and minor aromatic compounds as the cause of these differences. In addition, the metabolite profile was affected by the repeated harvest regime, causing a decrease of 1,5-anhydroglucitol, sucrose, unsaturated fatty acids, porphyrins, isoprenoids, and a flavonoid.

Energy Harvesting From Low Frequency Applications Using Piezoelectric Materials

Energy Technology Data Exchange (ETDEWEB)

Li, Huidong; Tian, Chuan; Deng, Zhiqun

2014-11-06

This paper reviewed the state of research on piezoelectric energy harvesters. Various types of harvester configurations, piezoelectric materials, and techniques used to improve the mechanical-to-electrical energy conversion efficiency were discussed. Most of the piezoelectric energy harvesters studied today have focused on scavenging mechanical energy from vibration sources due to their abundance in both natural and industrial environments. Cantilever beams have been the most studied structure for piezoelectric energy harvester to date because of the high responsiveness to small vibrations.

Clinicopathological comparisons of open vein harvesting and endoscopic vein harvesting in coronary artery bypass grafting patients in Mashhad.

Science.gov (United States)

Amouzeshi, Ahmad; Teshnisi, Mohamad Abbassi; Zirak, Nahid; Shamloo, Alireza Sepehri; Hoseinikhah, Hamid; Alizadeh, Behzad; Moeinipour, Aliasghar

2016-01-01

Harvesting of the greater saphenous vein is almost an inevitable part of coronary artery bypass grafting (CABG) operations, and it is done by two main techniques, i.e., conventional or open vein harvesting (OVH) and the minimally-invasive endoscopic vein harvesting (EVH). This study aimed to compare these two techniques in off-pump CABG procedures with respect to clinical and pathological outcomes. This cohort study was conducted on CABG candidates during a one-year period from October 2013 through September 2014 in the Department of Cardiac Surgery at Mashhad University of Medical Sciences. Eighty-seven patients voluntarily underwent EVH, and another 86 patients matched for age, gender, and other cardiovascular risk factors were selected for OVH. They were followed up for six weeks, and the main outcome measures were infections of the wound, pain, duration of hospital stay, and the costs of hospitalization. Paired sample t-test, independent t-test, or their non-parametric equivalents and the chi-squared test were used by SPSS version 17.0 for data analysis. The mean duration of time for vein harvesting was shorter in the EVH group (p < 0.001), and the pain score was lower (p = 0.04). No infections occurred at the site of the wound. The length of hospital stay was not significantly different for the two groups (OVH versus EVH: 8.5 ± 3.3 versus 8.4 ± 3.2 days; p-value: 0.08). Hospitalization costs were significantly higher in the EVH group (OVH versus EVH: 5.8 ± 4.7 versus 7.3 ± 2.0 million Tomman; p-value: 0.008), yet no difference was diagnosed with respect to endothelial damage in the vein grafts harvested by the EVH and OVH techniques. EVH is considered as a minimally invasive and safe vein harvesting technique in our Center, and it can reduce the harvesting time and post-operative pain. In addition, its efficiency was similar to that of OVH.

Piezoelectric energy harvesting

Energy Technology Data Exchange (ETDEWEB)

Howells, Christopher A [Power Technology Branch, US Army, CERDEC, C2D, Ft. Belvoir, VA 22060-5816 (United States)

2009-07-15

Piezoelectric materials can be used to convert oscillatory mechanical energy into electrical energy. This technology, together with innovative mechanical coupling designs, can form the basis for harvesting energy from mechanical motion. Piezoelectric energy can be harvested to convert walking motion from the human body into electrical power. Recently four proof-of-concept Heel Strike Units were developed where each unit is essentially a small electric generator that utilizes piezoelectric elements to convert mechanical motion into electrical power in the form factor of the heel of a boot. The results of the testing and evaluation and the performance of this small electric generator are presented. The generator's conversion of mechanical motion into electrical power, the processes it goes through to produce useable power and commercial applications of the Heel Strike electric generator are discussed. (author)

Effect of garment design on piezoelectricity harvesting from joint movement

International Nuclear Information System (INIS)

Yang, Jin-Hee; Cho, Hyun-Seung; Park, Seon-Hyung; Song, Seung-Hwan; Yun, Kwang-Seok; Lee, Joo Hyeon

2016-01-01

The harvesting of piezoelectricity through the human body involves the conversion of mechanical energy, mostly generated by the repeated movements of the body, to electrical energy, irrespective of the time and location. In this research, it was expected that the garment design would play an important role in increasing the efficiency of piezoelectricity scavenged in a garment because the mechanical deformation imposed on the energy harvester could increase through an optimal design configuration for the garment parts supporting a piezoelectricity harvester. With this expectation, this research aimed to analyze the effect of the clothing factors, and that of human factors on the efficiency of piezoelectricity harvesting through clothing in joint movements. These analyses resulted in that the efficiency of the piezoelectricity harvesting was affected from both two clothing factors, tightness level depending upon the property of the textile material and design configuration of the garment part supporting the piezoelectricity harvesting. Among the three proposed designs of the garment part supporting the piezoelectricity harvesting, ‘reinforced 3D module design,’ which maximized the value of radius in the piezoelectricity harvester, showed the highest efficiency across all areas of the joints in the human body. The two human factors, frequency of movement and body part, affected the efficiency of the piezoelectricity harvesting as well. (paper)

Effect of Harvest Period on the Proximate Composition and Functional and Sensory Properties of Gari Produced from Local and Improved Cassava (Manihot esculenta Varieties

Directory of Open Access Journals (Sweden)

Alphonse Laya

2018-01-01

Full Text Available This study is aimed at evaluating the proximate composition and functional and sensory characteristics of gari obtained from five cassava varieties (EN, AD, TMS92/0326, TMS96/1414, and IRAD4115. These cassavas were harvested during the dry season 12 months after planting (12MAP and in the rainy season (15MAP. Results showed that the characteristics of gari varied significantly (p<0.05 with the variety and the harvest period. Gari from EN cassava harvested at 12MAP had the highest total carbohydrates (78.07% dry weight, starch (61%, and proteins content, while gari from TMS 96/1414 variety (12MAP had high amino acids (10.25 mg/g and phenolic compounds (9.31 mg/g content. The gari from IRAD4115 had the highest value of ash content (20.62 mg/g at 12MAP. The soluble sugar content was high in the gari from cassava harvested at 12MAP while free cyanide reduced significantly in gari from cassava harvested at 12MAP. The water absorption capacity, swelling power, and bulk density were significantly (p<0.05 high in the gari from EN cassava variety at 12MAP. Compared to commercial gari (3.30, gari from EN local cassava had the best overall acceptability (4.35 followed by those obtained from TMS92/0326 and TMS92/1414 varieties, respectively.

Modeling the Technological Process for Harvesting of Agricultural Produce

Science.gov (United States)

Shepelev, S. D.; Shepelev, V. D.; Almetova, Z. V.; Shepeleva, N. P.; Cheskidov, M. V.

2018-01-01

The efficiency and the parameters of harvesting as a technological process being substantiated make it possible to reduce the cost of production and increase the profit of enterprises. To increase the efficiency of combine harvesters when the level of technical equipment declines is possible due to their efficient operating modes within daily and every season. Therefore, the correlation between the operational daily time and the seasonal load of combine harvesters is found, with the increase in the seasonal load causing the prolonged duration of operational daily time for harvesters being determined. To increase the efficient time of the seasonal load is possible due to a reasonable ratio of crop varieties according to their ripening periods, the necessary quantity of machines thereby to be reduced up to 40%. By timing and field testing the operational factor of the useful shift time of combine harvesters and the efficient modes of operating machines are defined, with the alternatives for improving the technical readiness of combine harvesters being identified.

Technical and Economical Evaluations of Canola Harvesting Losses in Different Maturity Stages Using Three Different Combine Harverster Heads

Directory of Open Access Journals (Sweden)

J Taghinazhad

2013-09-01

Full Text Available Rapeseed cultivation in Iran is growing rapidly while this product has been facing specific problems. Every year a significant portion of edible oil is imported to the country from other countries. Despite this deficit, a great amount of canola is being lost every year. Therefore, in compliance with technical points, adding a suitable platform to the exisiting machineries may reduce the losses. A field study was conducted in Moghan Agricultural Research Centre to study the technical and economical characteristics of harvesting machineries and evaluate Canola harvesting losses in different maturity stages, using three different combine harvester heads. The experiments were conducted in a completely randomized\tsplit split plot design with four replications. The main plot included seed maturity stage at three levels: A 60%, B 70% and C 80%, and the subplot was the harvester’s ground speed at three levels: A 1.5, B 2.5 and C 3.5 km h-1. The sub-subplot was combine head type with three forms: A Mechanical, B Hydraulically Joybar and C Hydraulically Biso's Head. The results of ANOVA showed that maximum cutter bar losses occurred with Mechanical Head (5.36% while the loss of Hydraulically Joybar's and Biso's head were 4.28 and 4.13 %, respectively. The results also showed that the maximum cutter bar losses occurred when 80% of seeds were matured and adequate time for canola harvesting was 70% of seeds maturity. The results of analysing the effects of harvesting ground speeds showed that the maximum cutter bar losses occurred with the speed of 3.5 km h-1. Finally, the results showed that the minimum cutter bar loss was obtained with Hydraulically Joybar's head considering the benefit per cost ratio. The cost for Mechanical head and Hydraulically Biso's head were 13500 and 262500 Rial ha-1, respectively.

Managing harvest and habitat as integrated components

Science.gov (United States)

Osnas, Erik; Runge, Michael C.; Mattsson, Brady J.; Austin, Jane E.; Boomer, G. S.; Clark, R. G.; Devers, P.; Eadie, J. M.; Lonsdorf, E. V.; Tavernia, Brian G.

2014-01-01

In 2007, several important initiatives in the North American waterfowl management community called for an integrated approach to habitat and harvest management. The essence of the call for integration is that harvest and habitat management affect the same resources, yet exist as separate endeavours with very different regulatory contexts. A common modelling framework could help these management streams to better understand their mutual effects. Particularly, how does successful habitat management increase harvest potential? Also, how do regional habitat programmes and large-scale harvest strategies affect continental population sizes (a metric used to express habitat goals)? In the ensuing five years, several projects took on different aspects of these challenges. While all of these projects are still on-going, and are not yet sufficiently developed to produce guidance for management decisions, they have been influential in expanding the dialogue and producing some important emerging lessons. The first lesson has been that one of the more difficult aspects of integration is not the integration across decision contexts, but the integration across spatial and temporal scales. Habitat management occurs at local and regional scales. Harvest management decisions are made at a continental scale. How do these actions, taken at different scales, combine to influence waterfowl population dynamics at all scales? The second lesson has been that consideration of the interface of habitat and harvest management can generate important insights into the objectives underlying the decision context. Often the objectives are very complex and trade-off against one another. The third lesson follows from the second – if an understanding of the fundamental objectives is paramount, there is no escaping the need for a better understanding of human dimensions, specifically the desires of hunters and nonhunters and the role they play in conservation. In the end, the compelling question is

Harvesting Information from Heterogeneous Sources

DEFF Research Database (Denmark)

Qureshi, Pir Abdul Rasool; Memon, Nasrullah; Wiil, Uffe Kock

2011-01-01

The abundance of information regarding any topic makes the Internet a very good resource. Even though searching the Internet is very easy, what remains difficult is to automate the process of information extraction from the available online information due to the lack of structure and the diversi...... with performance of our tool with respect to each format. Finally, the different potential applications of the proposed tool are discussed with special emphasis on open source intelligence....... in the sharing methods. Most of the times, information is stored in different proprietary formats, complying with different standards and protocols which makes tasks like data mining and information harvesting very difficult. In this paper, an information harvesting tool (heteroHarvest) is presented...... with objectives to address these problems by filtering the useful information and then normalizing the information in a singular non hypertext format. We also discuss state of the art tools along with the shortcomings and present the results of an analysis carried out over different heterogeneous formats along...

Passively-switched energy harvester for increased operational range

International Nuclear Information System (INIS)

Liu, Tian; Livermore, Carol; Pierre, Ryan St

2014-01-01

This paper presents modeling and experimental validation of a new type of vibrational energy harvester that passively switches between two dynamical modes of operation to expand the range of driving frequencies and accelerations over which the harvester effectively extracts power. In both modes, a driving beam with a low resonant frequency couples into ambient vibrations and transfers their energy to a generating beam that has a higher resonant frequency. The generating beam converts the mechanical power into electrical power. In coupled-motion mode, the driving beam bounces off the generating beam. In plucked mode, the driving beam deflects the generating beam until the driving beam passes from above the generating beam to below it or vice versa. Analytical system models are implemented numerically in the time domain for driving frequencies of 3 Hz to 27 Hz and accelerations from 0.1 g to 2.6 g, and both system dynamics and output power are predicted. A corresponding switched-dynamics harvester is tested experimentally, and its voltage, power, and dynamics are recorded. In both models and experiments, coupled-motion harvesting is observed at lower accelerations, whereas plucked harvesting and/or mixed mode harvesting are observed at higher accelerations. As expected, plucked harvesting outputs greater power than coupled-motion harvesting in both simulations and experiments. The predicted (1.8 mW) and measured (1.56 mW) maximum average power levels are similar under measured conditions at 0.5 g. When the system switches to dynamics that are characteristic of higher frequencies, the difference between predicted and measured power levels is more pronounced due to non-ideal mechanical interaction between the beams’ tips. Despite the beams’ non-ideal interactions, switched-dynamics operation increases the harvester’s operating range. (paper)

Applying new technologies to transform blueberry harvesting

Science.gov (United States)

The growth of the blueberry industry in the past three decades has been remarkable. However, labor shortage for hand harvesting, increasingly high labor costs, and low harvest efficiencies are becoming bottlenecks for sustainable development of the fresh market blueberry production. In this study ...

Composite Classifiers for Automatic Target Recognition

National Research Council Canada - National Science Library

Wang, Lin-Cheng

1998-01-01

...) using forward-looking infrared (FLIR) imagery. Two existing classifiers, one based on learning vector quantization and the other on modular neural networks, are used as the building blocks for our composite classifiers...

Holographic description of AdS2 black holes

International Nuclear Information System (INIS)

Castro, Alejandra; Larsen, Finn; Grumiller, Daniel; McNees, Robert

2008-01-01

We develop the holographic renormalization of AdS 2 gravity systematically. We find that a bulk Maxwell term necessitates a boundary mass term for the gauge field and verify that this unusual term is invariant under gauge transformations that preserve the boundary conditions. We determine the energy-momentum tensor and the central charge, recovering recent results by Hartman and Strominger. We show that our expressions are consistent with dimensional reduction of the AdS 3 energy-momentum tensor and the Brown-Henneaux central charge. As an application of our results we interpret the entropy of AdS 2 black holes as the ground state entropy of a dual CFT.

PRESTO: online calculation of carbon in harvested wood products

Science.gov (United States)

Coeli M. Hoover; Sarah J. Beukema; Donald C.E. Robinson; Katherine M. Kellock; Diana A. Abraham

2014-01-01

Carbon stored in harvested wood products is recognized under international carbon accounting protocols, and some crediting systems may permit the inclusion of harvested wood products when calculating carbon sequestration. For managers and landowners, however, estimating carbon stored in harvested wood products may be difficult. PRESTO (PRoduct EStimation Tool Online)...

Energy Harvesting Using Screen Printed PZT on Silicon

DEFF Research Database (Denmark)

Lei, Anders

and a multiplication factor equal to or less than 1. The available power is proportional to the force acting on the cantilever squared and the inverse of the viscous damping coefficient. The latest fabricated batch of harvesters produced in average 34.5 µW of RMS power over a resistive load of 50 k? with an RMS...... acceleration of 0.5g at 511 Hz. The best performing devices under similar conditions produced 44.9 µW at 543 Hz. Compared to other state of the art miniaturised vibration energy harvesters, the normalised power density for the harvesters fabricated in this work is 3.5 times higher than the next best harvester....

Fully Packaged Blue Energy Harvester by Hybridizing a Rolling Triboelectric Nanogenerator and an Electromagnetic Generator.

Science.gov (United States)

Wang, Xin; Wen, Zhen; Guo, Hengyu; Wu, Changsheng; He, Xu; Lin, Long; Cao, Xia; Wang, Zhong Lin

2016-12-27

Ocean energy, in theory, is an enormous clean and renewable energy resource that can generate electric power much more than that required to power the entire globe without adding any pollution to the atmosphere. However, owing to a lack of effective technology, such blue energy is almost unexplored to meet the energy requirement of human society. In this work, a fully packaged hybrid nanogenerator consisting of a rolling triboelectric nanogenerator (R-TENG) and an electromagnetic generator (EMG) is developed to harvest water motion energy. The outstanding output performance of the R-TENG (45 cm 3 in volume and 28.3 g in weight) in the low-frequency range (hybrid nanogenerator to deliver valuable outputs in a broad range of operation frequencies. Therefore, the hybrid nanogenerator can maximize the energy conversion efficiency and broaden the operating frequency simultaneously. In terms of charging capacitors, this hybrid nanogenerator provides not only high voltage and consistent charging from the TENG component but also fast charging speed from the EMG component. The practical application of the hybrid nanogenerator is also demonstrated to power light-emitting diodes by harvesting energy from stimulated tidal flow. The high robustness of the R-TENG is also validated based on the stable electrical output after continuous rolling motion. Therefore, the hybrid R-TENG and EMG device renders an effective and sustainable approach toward large-scale blue energy harvesting in a broad frequency range.

A Novel Ropes-DrivenWideband Piezoelectric Vibration Energy Harvester

Directory of Open Access Journals (Sweden)

Jinhui Zhang

2016-12-01

Full Text Available This paper presents a novel piezoelectric vibration energy harvester (PVEH in which a high-frequency generating beam (HFGB is driven by an array of low-frequency driving beams (LFDBs using ropes. Two mechanisms based on frequency upconversion and multimodal harvesting work together to broaden the frequency bandwidth of the proposed vibration energy harvester (VEH. The experimental results show that the output power of generating beam (GB remains unchanged with the increasing number of driving beams (DBs, compared with the traditional arrays of beams vibration energy harvester (AB-VEH, and the output power and bandwidth behavior can be adjusted by parameters such as acceleration, rope margin, and stiffness of LFDBs, which shows the potential to achieve unlimited wideband vibration energy-harvesting for a variable environment.

Light-cone AdS/CFT-adapted approach to AdS fields/currents, shadows, and conformal fields

Energy Technology Data Exchange (ETDEWEB)

Metsaev, R.R. [Department of Theoretical Physics, P.N. Lebedev Physical Institute, Leninsky prospect 53, Moscow 119991 (Russian Federation)

2015-10-16

Light-cone gauge formulation of fields in AdS space and conformal field theory in flat space adapted for the study of AdS/CFT correspondence is developed. Arbitrary spin mixed-symmetry fields in AdS space and arbitrary spin mixed-symmetry currents, shadows, and conformal fields in flat space are considered on an equal footing. For the massless and massive fields in AdS and the conformal fields in flat space, simple light-cone gauge actions leading to decoupled equations of motion are found. For the currents and shadows, simple expressions for all 2-point functions are also found. We demonstrate that representation of conformal algebra generators on space of currents, shadows, and conformal fields can be built in terms of spin operators entering the light-cone gauge formulation of AdS fields. This considerably simplifies the study of AdS/CFT correspondence. Light-cone gauge actions for totally symmetric arbitrary spin long conformal fields in flat space are presented. We apply our approach to the study of totally antisymmetric (one-column) and mixed-symmetry (two-column) fields in AdS space and currents, shadows, and conformal fields in flat space.

Flexible electret energy harvesters with parylene electret on PDMS substrates

International Nuclear Information System (INIS)

Chiu, Yi; Wu, Shih-Hsien

2013-01-01

Currently, most vibrational energy harvesters have rigid and resonant structures to harvest energy from periodic motions in specific directions. However, in some situations the motion is random and aperiodic; or the targeted energy source is the strain energy in deformation, rather than the kinetic energy in vibration. Therefore we propose and demonstrate a PDMS-based flexible energy harvester with parylene-C electret that can be attached to any deformable surfaces to harvest the stain energy caused by external deformation. The proposed flexible harvester was fabricated and characterized. The measured power at 20 Hz is 0.18 μW and 82 nW in the compression and bending modes, respectively. Such a harvester has the potential for wearable and implantable electronics applications

Peat classified as slowly renewable biomass fuel

International Nuclear Information System (INIS)

2001-01-01

The expert group, appointed by the Finnish Ministry of Trade and Industry, consisting of Dr. Patrick Crill from USA, Dr. Ken Hargreaves from UK and college lecturer Atte Korhola from Finland, studied the role of peat in Finnish greenhouse gas emissions. The group did not produce new research information, the report of the group based on the present research data available in Finland on greenhouse gas balances of Finnish mires and peat utilization, how much greenhouse gases, e.g. methane, CO 2 and N 2 O are liberated and bound by the mires. All the virgin peatlands in Finland (4.0 million ha), forest drained peatlands (5.7 million ha), peatlands used as fields in agriculture (0.25 million ha), peat harvesting and storage, as well as the actual peat production areas (0.063 million ha) are reviewed. The main factor intensifying the greenhouse effect, so called radiate forcing, is estimated to be the methane emissions from virgin peatlands, 11 million CO 2 equivalent tons per year. The next largest sources of emissions are estimated to be the CO 2 emissions of peat (8 million t/a), CO 2 emissions from peatlands in agricultural use (3.2 - 7.8 million t/a), the N 2 O emissions (over 2 million t/a) and methane emissions (less than 2 million t/a) of forest ditched peatlands. Other emission sources such as actual peat production and transportation are minimal. Largest carbon sinks are clearly forest-drained peatlands (9.4 - 14.9 million t/a) and virgin peatlands (more than 3 million t/a). Main conclusions of the experts group is that peat is formed continuously via photosynthesis of mosses, sedges and under-shrub vegetation and via forest litter formation. The report discovers that the basics of the formation of peat biomass is similar to that of other plant-based biomasses, such as wood, but the time required by stratification is different. Forests in Southern Finland become ready for harvesting in about 100 years, but the formation of commercially viable peat layers takes

Piezoelectric energy harvester under parquet floor

Science.gov (United States)

Bischur, E.; Schwesinger, N.

2011-03-01

The design, fabrication and testing of piezoelectric energy harvesting modules for floors is described. These modules are used beneath a parquet floor to harvest the energy of people walking over it. The harvesting modules consist of monoaxial stretched PVDF-foils. Multilayer modules are built up as roller-type capacitors. The fabrication process of the harvesting modules is simple and very suitable for mass production. Due to the use of organic polymers, the modules are characterized by a great flexibility and the possibility to create them in almost any geometrical size. The energy yield was determined depending on the dynamic loading force, the thickness of piezoelectric active material, the size of the piezoelectric modules, their alignment in the walking direction and their position on the floor. An increase of the energy yield at higher loading forces and higher thicknesses of the modules was observed. It was possible to generate up to 2.1mWs of electric energy with dynamic loads of 70kg using a specific module design. Furthermore a test floor was assembled to determine the influence of the size, alignment and position of the modules on the energy yield.

Design guidelines of triboelectric nanogenerator for water wave energy harvesters

KAUST Repository

Ahmed, Abdelsalam; Hassan, Islam; Jiang, Tao; Youssef, Khalid; Liu, Lian; Hedaya, Mohammad; Yazid, Taher Abu; Zu, Jean; Wang, Zhong Lin

2017-01-01

Ocean waves are one of the cleanest and most abundant energy sources on earth, and wave energy has the potential for future power generation. Triboelectric nanogenerator (TENG) technology has recently been proposed as a promising technology to harvest wave energy. In this paper, a theoretical study is performed on a duck-shaped TENG wave harvester recently introduced in our work. To enhance the design of the duck-shaped TENG wave harvester, the mechanical and electrical characteristics of the harvester's overall structure, as well as its inner configuration, are analyzed, respectively, under different wave conditions, to optimize parameters such as duck radius and mass. Furthermore, a comprehensive hybrid 3D model is introduced to quantify the performance of the TENG wave harvester. Finally, the influence of different TENG parameters is validated by comparing the performance of several existing TENG wave harvesters. This study can be applied as a guideline for enhancing the performance of TENG wave energy harvesters.

Design guidelines of triboelectric nanogenerator for water wave energy harvesters.

Science.gov (United States)

Ahmed, Abdelsalam; Hassan, Islam; Jiang, Tao; Youssef, Khalid; Liu, Lian; Hedaya, Mohammad; Yazid, Taher Abu; Zu, Jean; Wang, Zhong Lin

2017-05-05

Ocean waves are one of the cleanest and most abundant energy sources on earth, and wave energy has the potential for future power generation. Triboelectric nanogenerator (TENG) technology has recently been proposed as a promising technology to harvest wave energy. In this paper, a theoretical study is performed on a duck-shaped TENG wave harvester recently introduced in our work. To enhance the design of the duck-shaped TENG wave harvester, the mechanical and electrical characteristics of the harvester's overall structure, as well as its inner configuration, are analyzed, respectively, under different wave conditions, to optimize parameters such as duck radius and mass. Furthermore, a comprehensive hybrid 3D model is introduced to quantify the performance of the TENG wave harvester. Finally, the influence of different TENG parameters is validated by comparing the performance of several existing TENG wave harvesters. This study can be applied as a guideline for enhancing the performance of TENG wave energy harvesters.

Determinants of rainwater harvesting technology (RWHT) adoption ...

African Journals Online (AJOL)

2014-11-26

Nov 26, 2014 ... study evaluated the determinants of farmers' decisions to adopt rainwater harvesting technology ... adoption of RWHT in the study area. ... In South Africa, agriculture involves large numbers of ... Study area and data collection ..... study in rainwater harvesting: A 2011 perspective. ... Kluwer Academic.

Harvesting microalgae by bio-flocculation and autoflocculation

NARCIS (Netherlands)

Salim, S.

2013-01-01

Harvesting in commercial microalgae production plants is generally done by centrifugation, but this requires upto about 50% of the total energy gained from the microalgae. The energy needed for harvesting can be reduced considerably by pre-concentration of the microalgae prior to further dewatering.

Hybrid Neuro-Fuzzy Classifier Based On Nefclass Model

Directory of Open Access Journals (Sweden)

Bogdan Gliwa

2011-01-01

Full Text Available The paper presents hybrid neuro-fuzzy classifier, based on NEFCLASS model, which wasmodified. The presented classifier was compared to popular classifiers – neural networks andk-nearest neighbours. Efficiency of modifications in classifier was compared with methodsused in original model NEFCLASS (learning methods. Accuracy of classifier was testedusing 3 datasets from UCI Machine Learning Repository: iris, wine and breast cancer wisconsin.Moreover, influence of ensemble classification methods on classification accuracy waspresented.

Central charge for AdS2 quantum gravity

International Nuclear Information System (INIS)

Hartman, Thomas; Strominger, Andrew

2009-01-01

Two-dimensional Maxwell-dilaton quantum gravity on AdS 2 with radius l and a constant electric field E is studied. In conformal gauge, this is equivalent to a CFT on a strip. In order to maintain consistent boundary conditions, the usual conformal diffeomorphisms must be accompanied by a certain U(1) gauge transformation. The resulting conformal transformations are generated by a twisted stress tensor, which has a central charge c = 3kE 2 l 4 /4 where k is the level of the U(1) current. This is an AdS 2 analog of the Brown-Henneaux formula c = 3l/2G for the central charge of quantum gravity on AdS 3 .

Effects of pre-harvest methyl jasmonate treatment on post-harvest ...

African Journals Online (AJOL)

... quality and bioactive compounds of three different Japanese plums under storage conditions. Materials and Methods: The effects of pre-harvest methyl jasmonate treatment (MeJA) on weight loss, color characteristics (L*, C* and h°), firmness, soluble solids content (SSC), titratable acidity (TA), total phenolics (TP) and total ...

Distribution and derivation of white-winged dove harvests in Texas

KAUST Repository

Collier, Bret A.; Skow, Kevin L.; Kremer, Shelly R.; Mason, Corey D.; Snelgrove, Robert T.; Calhoun, Kirby W.

2012-01-01

Band recoveries provide requisite data for evaluating the spatial distribution of harvest relative to the distribution of breeding stocks for a wide variety of migratory species. We used direct and indirect band-recovery data to evaluate the distribution and derivation of harvest of white-winged doves (Zenaida asiatica) banded before hunting season in 3 distinct strata in Texas, USA, during 2007-2010. We banded 60,742 white-winged doves during 2007-2010, and based on 2,458 harvest recoveries, the majority (>95%) of white-winged dove harvest occurred during the first 2 months of the hunting season (Sep-Oct). Juvenile white-winged doves represented a greater percentage of the direct recoveries than adults across all strata (north = 80%, central = 69%, south = 82%) and the majority of direct band recoveries (north = 75%, central = 90%, south = 78%) occurred within the original banding strata. Age-specific weighting factors and harvest derivation indicated that both juvenile and adult harvest were highest within the strata of original banding. Harvest distribution data corrected for band-reporting rates indicated high fidelity of white-winged doves to specific geographic strata, with little interplay between strata. Our results suggest that population vital-rate estimates for survival and harvest for use in future Adaptive Harvest Management should focus on stock-specific levels. © 2012 The Wildlife Society.

Distribution and derivation of white-winged dove harvests in Texas

KAUST Repository

Collier, Bret A.

2012-04-25

Band recoveries provide requisite data for evaluating the spatial distribution of harvest relative to the distribution of breeding stocks for a wide variety of migratory species. We used direct and indirect band-recovery data to evaluate the distribution and derivation of harvest of white-winged doves (Zenaida asiatica) banded before hunting season in 3 distinct strata in Texas, USA, during 2007-2010. We banded 60,742 white-winged doves during 2007-2010, and based on 2,458 harvest recoveries, the majority (>95%) of white-winged dove harvest occurred during the first 2 months of the hunting season (Sep-Oct). Juvenile white-winged doves represented a greater percentage of the direct recoveries than adults across all strata (north = 80%, central = 69%, south = 82%) and the majority of direct band recoveries (north = 75%, central = 90%, south = 78%) occurred within the original banding strata. Age-specific weighting factors and harvest derivation indicated that both juvenile and adult harvest were highest within the strata of original banding. Harvest distribution data corrected for band-reporting rates indicated high fidelity of white-winged doves to specific geographic strata, with little interplay between strata. Our results suggest that population vital-rate estimates for survival and harvest for use in future Adaptive Harvest Management should focus on stock-specific levels. © 2012 The Wildlife Society.

Preliminary design of a coffee harvester

Directory of Open Access Journals (Sweden)

Raphael Magalhães Gomes Moreira

2016-10-01

Full Text Available Design of an agricultural machine is a highly complex process due to interactions between the operator, machine, and environment. Mountain coffee plantations constitute an economic sector that requires huge investments for the development of agricultural machinery to improve the harvesting and post-harvesting processes and to overcome the scarcity of work forces in the fields. The aim of this study was to develop a preliminary design for a virtual prototype of a coffee fruit harvester. In this study, a project methodology was applied and adapted for the development of the following steps: project planning, informational design, conceptual design, and preliminary design. The construction of a morphological matrix made it possible to obtain a list of different mechanisms with specific functions. The union between these mechanisms resulted in variants, which were weighed to attribute scores for each selected criterion. From each designated proposal, two variants with the best scores were selected and this permitted the preparation of the preliminary design of both variants. The archetype was divided in two parts, namely the hydraulically articulated arms and the harvesting system that consisted of the vibration mechanism and the detachment mechanism. The proposed innovation involves the use of parallel rods, which were fixed in a plane and rectangular metal sheet. In this step, dimensions including a maximum length of 4.7 m, a minimum length of 3.3 m, and a total height of 2.15 m were identified based on the functioning of the harvester in relation to the coupling point of the tractor.

HYBRID POWER HARVESTER USING ENGINE SOURCE

OpenAIRE

Meeran Mydeen, A.Ahmed; Inasu, Kelwin; Venkatesh, M.; Suthesh, C.

2017-01-01

In mainly we present a compact, multisource and battery-free energy harvesting from engine source. This battery free generator captures energy from its environment transient thermal gradients as a main source, and vibration as a secondary source allowing early biasing of the generator and stores this energy in ultra-capacitors .In this way, this multi-source architecture benefits from the synergy between energy scavenging and harvesting.

Heading Estimation of Robot Combine Harvesters during Turning Maneuveres

Directory of Open Access Journals (Sweden)

Md Mostafizar Rahman

2018-05-01

Full Text Available Absolute heading is an important parameter for a robot combine harvester or a robot tracked combine harvester, especially while it is turning, but due to the rapid turning of robot combine harvesters, its inertial measurement unit gives a gyro measurement bias that causes heading drift. Our research goal is to estimate the absolute heading of robot combine harvesters by compensating this gyro measurement bias during non-linear turning maneuvers. A sensor fusion method like the extended Kalman filter combined with the tracked combine harvester dynamic model and sensor measurements was used to estimate the absolute heading of a robot combine harvester. Circular, sinusoidal and concave shapes were used to evaluate the estimated heading produced by the sensor fusion method. The results indicate that the estimated heading is better than measured heading which was calculated from the integration of yaw rate gyro measurements, and the root mean square errors (RMSEs for estimated headings are smaller than the measured headings. In practics, the target of this paper is thus the estimation of a heading or absolute heading that is bias compensated, and can be further used to calculate the exact crop periphery for automatic path planning of robot combine harvesters.

Forest soil carbon is threatened by intensive biomass harvesting.

Science.gov (United States)

Achat, David L; Fortin, Mathieu; Landmann, Guy; Ringeval, Bruno; Augusto, Laurent

2015-11-04

Forests play a key role in the carbon cycle as they store huge quantities of organic carbon, most of which is stored in soils, with a smaller part being held in vegetation. While the carbon storage capacity of forests is influenced by forestry, the long-term impacts of forest managers' decisions on soil organic carbon (SOC) remain unclear. Using a meta-analysis approach, we showed that conventional biomass harvests preserved the SOC of forests, unlike intensive harvests where logging residues were harvested to produce fuelwood. Conventional harvests caused a decrease in carbon storage in the forest floor, but when the whole soil profile was taken into account, we found that this loss in the forest floor was compensated by an accumulation of SOC in deeper soil layers. Conversely, we found that intensive harvests led to SOC losses in all layers of forest soils. We assessed the potential impact of intensive harvests on the carbon budget, focusing on managed European forests. Estimated carbon losses from forest soils suggested that intensive biomass harvests could constitute an important source of carbon transfer from forests to the atmosphere (142-497 Tg-C), partly neutralizing the role of a carbon sink played by forest soils.

Compact passively self-tuning energy harvesting for rotating applications

International Nuclear Information System (INIS)

Gu, Lei; Livermore, Carol

2012-01-01

This paper presents a compact, passive, self-tuning energy harvester for rotating applications. The harvester rotates in the vertical plane and is comprised of two beams: a relatively rigid piezoelectric generating beam and a narrow, flexible driving beam with a tip mass mounted at the end. The mass impacts the generating beam repeatedly under the influence of gravity to drive generation. Centrifugal force from the rotation modifies the resonant frequency of the flexible driving beam and the frequency response of the harvester. An analytical model that captures the harvester system's resonant frequency as a function of rotational speed is used to guide the detailed design. With an optimized design, the resonant frequency of the harvester substantially matches the frequency of the rotation over a wide frequency range from 4 to 16.2 Hz. A prototype of the passive self-tuning energy harvester using a lead zirconate titanate generating beam achieved a power density of 30.8 µW cm −3 and a more than 11 Hz bandwidth, which is much larger than the 0.8 Hz bandwidth calculated semi-empirically for a similar but untuned harvester. Passive tuning was also demonstrated using the more robust and reliable but less efficient polymer polyvinylidene fluoride for the generating beam

Restoration of harvested peatlands

International Nuclear Information System (INIS)

Saarmets, Tiit

1999-01-01

A short analysis of the main topics of the IPS Symposium Peatland Restoration and Reclamation, Duluth, Minnesota, USA, 1998 is given. It has been single-mindedly recommended in Estonia so far that harvested peatland surfaces should be levelled and outflows shut. But following these recommendations will lead to an unfounded formation of marshy areas with a very low growth of plants. The reclamation of harvested peatlands for agricultural purposes is expensive and there is no commercial need for agricultural land in today's Estonia now. In the author's opinion the foreflows and intermediate ditches should be left open which would favour the growth of the brushwood to grow later into the forest of commercial value. (author)

AdS5 black holes with fermionic hair

International Nuclear Information System (INIS)

Burrington, Benjamin A.; Liu, James T.; Sabra, W. A.

2005-01-01

The study of new Bogomol'nyi-Prasad-Sommerfield (BPS) objects in AdS 5 has led to a deeper understanding of AdS/CFT. To help complete this picture, and to fully explore the consequences of the supersymmetry algebra, it is also important to obtain new solutions with bulk fermions turned on. In this paper we construct superpartners of the 1/2 BPS black hole in AdS 5 using a natural set of fermion zero modes. We demonstrate that these superpartners, carrying fermionic hair, have conserved charges differing from the original bosonic counterpart. To do so, we find the R-charge and dipole moment of the new system, as well as the mass and angular momentum, defined through the boundary stress tensor. The complete set of superpartners fits nicely into a chiral representation of AdS 5 supersymmetry, and the spinning solutions have the expected gyromagnetic ratio, g=1

Magnetostrictive energy generator for harvesting the rotation of human knee joint

Directory of Open Access Journals (Sweden)

Baiping Yan

2018-05-01

Full Text Available This paper presents the design and fabrication of a rotary-impact magnetostrictive energy generator, used to harvest the rotation of human knee joint. The harvester consists of twelve movable Terfenol-D rods, surrounded by the picked up coils respectively, and alternate permanent magnet (PM array sandwiched in each part of the shell. Rotational electromagnetic power generating effect and impacted magnetostrictive power generating effect are designed in the harvester. Modeling and simulation are used to validate the concept. Then, magnetic field and leakage of the harvester are analyzed, electromagnetic force in the harvester is simulated. A prototype of harvester is fabricated, and subjected to the experimental characterization. It can be concluded that huge induced voltage generated in the short-time impact situation and that induced voltage in the harvester can reach up to 60-80 volts at 0.91Hz low frequency rotation. Also, the presented harvester has good harvesting effects at low frequency human walking and periodic swing crus situation, which are suitable to be used for future researches of wearable knee joint applications.

Magnetostrictive energy generator for harvesting the rotation of human knee joint

Science.gov (United States)

Yan, Baiping; Zhang, Chengming; Li, Liyi

2018-05-01

This paper presents the design and fabrication of a rotary-impact magnetostrictive energy generator, used to harvest the rotation of human knee joint. The harvester consists of twelve movable Terfenol-D rods, surrounded by the picked up coils respectively, and alternate permanent magnet (PM) array sandwiched in each part of the shell. Rotational electromagnetic power generating effect and impacted magnetostrictive power generating effect are designed in the harvester. Modeling and simulation are used to validate the concept. Then, magnetic field and leakage of the harvester are analyzed, electromagnetic force in the harvester is simulated. A prototype of harvester is fabricated, and subjected to the experimental characterization. It can be concluded that huge induced voltage generated in the short-time impact situation and that induced voltage in the harvester can reach up to 60-80 volts at 0.91Hz low frequency rotation. Also, the presented harvester has good harvesting effects at low frequency human walking and periodic swing crus situation, which are suitable to be used for future researches of wearable knee joint applications.

Phases of global AdS black holes

International Nuclear Information System (INIS)

Basu, Pallab; Krishnan, Chethan; Subramanian, P.N. Bala

2016-01-01

We study the phases of gravity coupled to a charged scalar and gauge field in an asymptotically Anti-de Sitter spacetime (AdS_4) in the grand canonical ensemble. For the conformally coupled scalar, an intricate phase diagram is charted out between the four relevant solutions: global AdS, boson star, Reissner-Nordstrom black hole and the hairy black hole. The nature of the phase diagram undergoes qualitative changes as the charge of the scalar is changed, which we discuss. We also discuss the new features that arise in the extremal limit.

36 CFR 1256.46 - National security-classified information.

Science.gov (United States)

2010-07-01

... 36 Parks, Forests, and Public Property 3 2010-07-01 2010-07-01 false National security-classified... Restrictions § 1256.46 National security-classified information. In accordance with 5 U.S.C. 552(b)(1), NARA... properly classified under the provisions of the pertinent Executive Order on Classified National Security...

Adaptive learning algorithms for vibration energy harvesting

International Nuclear Information System (INIS)

Ward, John K; Behrens, Sam

2008-01-01

By scavenging energy from their local environment, portable electronic devices such as MEMS devices, mobile phones, radios and wireless sensors can achieve greater run times with potentially lower weight. Vibration energy harvesting is one such approach where energy from parasitic vibrations can be converted into electrical energy through the use of piezoelectric and electromagnetic transducers. Parasitic vibrations come from a range of sources such as human movement, wind, seismic forces and traffic. Existing approaches to vibration energy harvesting typically utilize a rectifier circuit, which is tuned to the resonant frequency of the harvesting structure and the dominant frequency of vibration. We have developed a novel approach to vibration energy harvesting, including adaptation to non-periodic vibrations so as to extract the maximum amount of vibration energy available. Experimental results of an experimental apparatus using an off-the-shelf transducer (i.e. speaker coil) show mechanical vibration to electrical energy conversion efficiencies of 27–34%

Piezoelectric energy harvesting from flow-induced vibration

International Nuclear Information System (INIS)

Wang, D-A; Ko, H-H

2010-01-01

A new piezoelectric energy harvester for harnessing energy from flow-induced vibration is developed. It converts flow energy into electrical energy by piezoelectric conversion with oscillation of a piezoelectric film. A finite element model is developed in order to estimate the generated voltage of the piezoelectric laminate subjected to a distributed load. Prototypes of the energy harvester are fabricated and tested. Experimental results show that an open circuit output voltage of 2.2 V pp and an instantaneous output power of 0.2 µW are generated when the excitation pressure oscillates with an amplitude of 1.196 kPa and a frequency of about 26 Hz. The solution of the generated voltage based on the finite element model agrees well with the experiments. Based on the finite element model, the effects of the piezoelectric film dimensions, the fluid pressure applied to the harvester and types of piezoelectric layer on the output voltage of the harvester can be investigated.

Class-specific Error Bounds for Ensemble Classifiers

Energy Technology Data Exchange (ETDEWEB)

Prenger, R; Lemmond, T; Varshney, K; Chen, B; Hanley, W

2009-10-06

The generalization error, or probability of misclassification, of ensemble classifiers has been shown to be bounded above by a function of the mean correlation between the constituent (i.e., base) classifiers and their average strength. This bound suggests that increasing the strength and/or decreasing the correlation of an ensemble's base classifiers may yield improved performance under the assumption of equal error costs. However, this and other existing bounds do not directly address application spaces in which error costs are inherently unequal. For applications involving binary classification, Receiver Operating Characteristic (ROC) curves, performance curves that explicitly trade off false alarms and missed detections, are often utilized to support decision making. To address performance optimization in this context, we have developed a lower bound for the entire ROC curve that can be expressed in terms of the class-specific strength and correlation of the base classifiers. We present empirical analyses demonstrating the efficacy of these bounds in predicting relative classifier performance. In addition, we specify performance regions of the ROC curve that are naturally delineated by the class-specific strengths of the base classifiers and show that each of these regions can be associated with a unique set of guidelines for performance optimization of binary classifiers within unequal error cost regimes.

Evaluation of mechanical harvesting in viticulture

Directory of Open Access Journals (Sweden)

Pavel Zemánek

2005-01-01

Full Text Available Harvesting by mashine was in CZ tested at bygones century (70th. Tests rekord were bad (high share of leaf, detritus of concrete column, losses of berries.Lasting fall of worker in agriculture and vehement growth floricultural surfaces – vineyard (somewhere 19.000 hectare, requires complex rationalization and mechanization of all works stages which needs needlework. Harvisting in viniculture needs perhaps 30% of all working time (200–250 o‘clock on 1 hectare. Incidence thereof begun most of bigger producers in our country with mechanical harvisting. Technical performance of this machines turn up. There are not available data about costs and their work quality.The benefit deal with classification of mechanical harvesting (juice adhering, berries lost, damage of vineyard transaction by the help of semi-trailer and self-propelled harvesters.

An Energy-Efficient Scheme for Multirelay Cooperative Networks with Energy Harvesting

Directory of Open Access Journals (Sweden)

Dingcheng Yang

2016-01-01

Full Text Available This study investigates an energy-efficient scheme in multirelay cooperative networks with energy harvesting where multiple sessions need to communicate with each other via the relay node. A two-step optimal method is proposed which maximizes the system energy efficiency, while taking into account the receiver circuit energy consumption. Firstly, the optimal power allocation for relay nodes is determined to maximize the system throughput; this is based on directional water-filling algorithm. Secondly, using quantum particle swarm optimization (QPSO, a joint relay node selection and session grouping optimization is proposed. With this algorithm, sessions can be classified into multiple groups that are assisted by the specific relay node with the maximum energy efficiency. This approach leads to a better global optimization in searching ability and efficiency. Simulation results show that the proposed scheme can improve the energy efficiency effectively compared with direct transmission and opportunistic relay-selected cooperative transmission.

Dyonic (A)dS black holes in Einstein-Born-Infeld theory in diverse dimensions

Energy Technology Data Exchange (ETDEWEB)

Li, Shoulong [School of Physics, Beijing Institute of Technology,5 South Zhongguancun Street, Beijing 100081 (China); Lü, H. [Center for Advanced Quantum Studies,Department of Physics, Beijing Normal University,19 Xinjiekouwai Street, Beijing 100875 (China); Wei, Hao [School of Physics, Beijing Institute of Technology,5 South Zhongguancun Street, Beijing 100081 (China)

2016-07-01

We study Einstein-Born-Infeld gravity and construct the dyonic (A)dS planar black holes in general even dimensions, that carry both the electric charge and magnetic fluxes along the planar space. In four dimensions, the solution can be constructed with also spherical and hyperbolic topologies. We study the black hole thermodynamics and obtain the first law. We also classify the singularity structure.

New Massive Gravity and AdS4 Counterterms

International Nuclear Information System (INIS)

Jatkar, Dileep P.; Sinha, Aninda

2011-01-01

We show that the recently proposed Dirac-Born-Infeld extension of new massive gravity emerges naturally as a counterterm in four-dimensional anti-de Sitter space (AdS 4 ). The resulting on-shell Euclidean action is independent of the cutoff at zero temperature. We also find that the same choice of counterterm gives the usual area law for the AdS 4 Schwarzschild black hole entropy in a cutoff-independent manner. The parameter values of the resulting counterterm action correspond to a c=0 theory in the context of the duality between AdS 3 gravity and two-dimensional conformal field theory. We rewrite this theory in terms of the gauge field that is used to recast 3D gravity as a Chern-Simons theory.

A Shoe-Embedded Piezoelectric Energy Harvester for Wearable Sensors

Directory of Open Access Journals (Sweden)

Jingjing Zhao

2014-07-01

Full Text Available Harvesting mechanical energy from human motion is an attractive approach for obtaining clean and sustainable electric energy to power wearable sensors, which are widely used for health monitoring, activity recognition, gait analysis and so on. This paper studies a piezoelectric energy harvester for the parasitic mechanical energy in shoes originated from human motion. The harvester is based on a specially designed sandwich structure with a thin thickness, which makes it readily compatible with a shoe. Besides, consideration is given to both high performance and excellent durability. The harvester provides an average output power of 1 mW during a walk at a frequency of roughly 1 Hz. Furthermore, a direct current (DC power supply is built through integrating the harvester with a power management circuit. The DC power supply is tested by driving a simulated wireless transmitter, which can be activated once every 2–3 steps with an active period lasting 5 ms and a mean power of 50 mW. This work demonstrates the feasibility of applying piezoelectric energy harvesters to power wearable sensors.

The role of energy losses in photosynthetic light harvesting

Science.gov (United States)

Krüger, T. P. J.; van Grondelle, R.

2017-07-01

Photosynthesis operates at the bottom of the food chain to convert the energy of light into carbohydrates at a remarkable global rate of about 130 TW. Nonetheless, the overall photosynthetic process has a conversion efficiency of a few percent at best, significantly less than bottom-up photovoltaic cells. The primary photosynthetic steps, consisting of light harvesting and charge separation, are often presented as having near-unity quantum efficiency but this holds only true under ideal conditions. In this review, we discuss the importance of energy loss mechanisms to establish robustness in photosynthetic light harvesting. Thermal energy dissipation of light-harvesting complexes (LHCs) in different environments is investigated and the relationships and contrasts between concentration quenching of high pigment concentrations, photoprotection (non-photochemical quenching), quenching due to protein aggregation, and fluorescence blinking are discussed. The role of charge-transfer states in light harvesting and energy dissipation is highlighted and the importance of controlled protein structural disorder to switch the light-harvesting antennae between effective light harvesters and efficient energy quenchers is underscored. The main LHC of plants, LHCII, is used as a prime example.

Energy harvesting from low frequency applications using piezoelectric materials

International Nuclear Information System (INIS)

Li, Huidong; Tian, Chuan; Deng, Z. Daniel

2014-01-01

In an effort to eliminate the replacement of the batteries of electronic devices that are difficult or impractical to service once deployed, harvesting energy from mechanical vibrations or impacts using piezoelectric materials has been researched over the last several decades. However, a majority of these applications have very low input frequencies. This presents a challenge for the researchers to optimize the energy output of piezoelectric energy harvesters, due to the relatively high elastic moduli of piezoelectric materials used to date. This paper reviews the current state of research on piezoelectric energy harvesting devices for low frequency (0–100 Hz) applications and the methods that have been developed to improve the power outputs of the piezoelectric energy harvesters. Various key aspects that contribute to the overall performance of a piezoelectric energy harvester are discussed, including geometries of the piezoelectric element, types of piezoelectric material used, techniques employed to match the resonance frequency of the piezoelectric element to input frequency of the host structure, and electronic circuits specifically designed for energy harvesters

Differential fat harvesting

Directory of Open Access Journals (Sweden)

Sebastian Torres Farr

2014-12-01

Full Text Available Aim: Volume replacement with fillers is regularly performed with the use of diverse volumetric materials to correct different structures around the face, depending on the volume enhancement required and the thickness of the soft tissue envelope. Differential fat harvesting and posterior grafting is performed to place the correct fat parcel size for each target area, expanding the potential applications of fat. Methods: Sixty patients consecutively recruited on a first come basis undergone a facial fat grafting procedure, in private practice setting between March 2012 and October 2013. Fat grafting quantity and quality was predicted for each case. Differential harvesting was performed, with 2 fat parcels size. Processing was performed through washing. Fat infiltration was carried out through small cannulas or needles depending on the treated area. Outcomes were analysed both by the physicians and the patients at 7 days, 1 month, 3 months and 6 months through a perceived satisfaction questionnaire. Parameters considered were downtime or discomfort, skin benefits, volume restoration, reabsorption rate estimated and overall improvement. Results: Full facial differential fat grafting procedure lasted an average of 1.5-2.5 h. Average downtime was 3-4 days. Follow-up was performed to a minimum of 6 months. Both patient and physician overall satisfaction rates were mostly excellent. Adverse events like lumps or irregularities were not encountered. Conclusion: Differential fat harvesting and posterior grafting is a valid alternative, to expand the repertoire of fat use, allow a more homogeneous effect, reduce the potential complications, speed up the process, improve graft survival, and to enhance overall aesthetic outcome.

Deconvolution When Classifying Noisy Data Involving Transformations

KAUST Repository

Carroll, Raymond

2012-09-01

In the present study, we consider the problem of classifying spatial data distorted by a linear transformation or convolution and contaminated by additive random noise. In this setting, we show that classifier performance can be improved if we carefully invert the data before the classifier is applied. However, the inverse transformation is not constructed so as to recover the original signal, and in fact, we show that taking the latter approach is generally inadvisable. We introduce a fully data-driven procedure based on cross-validation, and use several classifiers to illustrate numerical properties of our approach. Theoretical arguments are given in support of our claims. Our procedure is applied to data generated by light detection and ranging (Lidar) technology, where we improve on earlier approaches to classifying aerosols. This article has supplementary materials online.

Deconvolution When Classifying Noisy Data Involving Transformations.

Science.gov (United States)

Carroll, Raymond; Delaigle, Aurore; Hall, Peter

2012-09-01

In the present study, we consider the problem of classifying spatial data distorted by a linear transformation or convolution and contaminated by additive random noise. In this setting, we show that classifier performance can be improved if we carefully invert the data before the classifier is applied. However, the inverse transformation is not constructed so as to recover the original signal, and in fact, we show that taking the latter approach is generally inadvisable. We introduce a fully data-driven procedure based on cross-validation, and use several classifiers to illustrate numerical properties of our approach. Theoretical arguments are given in support of our claims. Our procedure is applied to data generated by light detection and ranging (Lidar) technology, where we improve on earlier approaches to classifying aerosols. This article has supplementary materials online.

Just-in-time classifiers for recurrent concepts.

Science.gov (United States)

Alippi, Cesare; Boracchi, Giacomo; Roveri, Manuel

2013-04-01

Just-in-time (JIT) classifiers operate in evolving environments by classifying instances and reacting to concept drift. In stationary conditions, a JIT classifier improves its accuracy over time by exploiting additional supervised information coming from the field. In nonstationary conditions, however, the classifier reacts as soon as concept drift is detected; the current classification setup is discarded and a suitable one activated to keep the accuracy high. We present a novel generation of JIT classifiers able to deal with recurrent concept drift by means of a practical formalization of the concept representation and the definition of a set of operators working on such representations. The concept-drift detection activity, which is crucial in promptly reacting to changes exactly when needed, is advanced by considering change-detection tests monitoring both inputs and classes distributions.

Deconvolution When Classifying Noisy Data Involving Transformations

KAUST Repository

Carroll, Raymond; Delaigle, Aurore; Hall, Peter

2012-01-01

In the present study, we consider the problem of classifying spatial data distorted by a linear transformation or convolution and contaminated by additive random noise. In this setting, we show that classifier performance can be improved if we carefully invert the data before the classifier is applied. However, the inverse transformation is not constructed so as to recover the original signal, and in fact, we show that taking the latter approach is generally inadvisable. We introduce a fully data-driven procedure based on cross-validation, and use several classifiers to illustrate numerical properties of our approach. Theoretical arguments are given in support of our claims. Our procedure is applied to data generated by light detection and ranging (Lidar) technology, where we improve on earlier approaches to classifying aerosols. This article has supplementary materials online.

Machine Learning-based Individual Assessment of Cortical Atrophy Pattern in Alzheimer's Disease Spectrum: Development of the Classifier and Longitudinal Evaluation.

Science.gov (United States)

Lee, Jin San; Kim, Changsoo; Shin, Jeong-Hyeon; Cho, Hanna; Shin, Dae-Seock; Kim, Nakyoung; Kim, Hee Jin; Kim, Yeshin; Lockhart, Samuel N; Na, Duk L; Seo, Sang Won; Seong, Joon-Kyung

2018-03-07

To develop a new method for measuring Alzheimer's disease (AD)-specific similarity of cortical atrophy patterns at the individual-level, we employed an individual-level machine learning algorithm. A total of 869 cognitively normal (CN) individuals and 473 patients with probable AD dementia who underwent high-resolution 3T brain MRI were included. We propose a machine learning-based method for measuring the similarity of an individual subject's cortical atrophy pattern with that of a representative AD patient cohort. In addition, we validated this similarity measure in two longitudinal cohorts consisting of 79 patients with amnestic-mild cognitive impairment (aMCI) and 27 patients with probable AD dementia. Surface-based morphometry classifier for discriminating AD from CN showed sensitivity and specificity values of 87.1% and 93.3%, respectively. In the longitudinal validation study, aMCI-converts had higher atrophy similarity at both baseline (p < 0.001) and first year visits (p < 0.001) relative to non-converters. Similarly, AD patients with faster decline had higher atrophy similarity than slower decliners at baseline (p = 0.042), first year (p = 0.028), and third year visits (p = 0.027). The AD-specific atrophy similarity measure is a novel approach for the prediction of dementia risk and for the evaluation of AD trajectories on an individual subject level.

Simultaneous harvesting of straw and chaff - for energy purposes. Influence on bale density, yield, field drying process and combustion characteristics; Samtidig skoerd av halm och agnar foer energiaendamaal - inverkan paa avkastning, baldensitet, faelttorkningsfoerlopp och foerbraenningsegenskaper

Energy Technology Data Exchange (ETDEWEB)

Lundin, Gunnar; Roennbaeck, Marie

2010-04-15

Introductory field experiments were carried out in central Sweden during 2009 for long- and short-stalked winter wheat crops. Two different types of combine harvesters were used with somewhat different methods of kernel separation. Both harvesters were equipped with the Combi System from Rekordverken. This enabled them to mix the chaff in the straw swath as well as distribute this fraction over the working width. The measurement of crop residue moisture immediately after combine harvesting showed that admixture of chaff reduced the initial moisture in the straw swaths. The added chaff increased the total yield of crop residue with 14%, showing that about half the biologically available chaff was harvested. The combustion analyses showed a slight increase in ash content when chaff was mixed in. This did not cause any significant change in net calorific value or ash melting behavior

Antismoking Ads at the Point of Sale: The Influence of Ad Type and Context on Ad Reactions.

Science.gov (United States)

Kim, Annice; Nonnemaker, James; Guillory, Jamie; Shafer, Paul; Parvanta, Sarah; Holloway, John; Farrelly, Matthew

2017-06-01

Efforts are underway to educate consumers about the dangers of smoking at the point of sale (POS). Research is limited about the efficacy of POS antismoking ads to guide campaign development. This study experimentally tests whether the type of antismoking ad and the context in which ads are viewed influence people's reactions to the ads. A national convenience sample of 7,812 adult current smokers and recent quitters was randomized to 1 of 39 conditions. Participants viewed one of the four types of antismoking ads (negative health consequences-graphic, negative social consequences-intended emotive, benefits of quitting-informational, benefits of quitting-graphic) in one of the three contexts (alone, next to a cigarette ad, POS tobacco display). We assessed participants' reactions to the ads, including perceived effectiveness, negative emotion, affective dissonance, and motivational reaction. Graphic ads elicited more negative emotion and affective dissonance than benefits of quitting ads. Graphic ads elicited higher perceived effectiveness and more affective dissonance than intended emotive ads. Antismoking ads fared best when viewed alone, and graphic ads were least influenced by the context in which they were viewed. These results suggest that in developing POS campaigns, it is important to consider the competitive pro-tobacco context in which antismoking ads will be viewed.

Towards Complete Coverage in Focused Web Harvesting

NARCIS (Netherlands)

Khelghati, Mohammadreza; Hiemstra, Djoerd; van Keulen, Maurice

2015-01-01

With the goal of harvesting all information about a given entity, in this paper, we try to harvest all matching documents for a given query submitted on a search engine. The objective is to retrieve all information about for instance "Michael Jackson", "Islamic State", or "FC Barcelona" from indexed

50 CFR 300.132 - Lobster harvest limitations.

Science.gov (United States)

2010-10-01

... 50 Wildlife and Fisheries 7 2010-10-01 2010-10-01 false Lobster harvest limitations. 300.132... FISHERIES REGULATIONS Vessels of the United States Fishing in Colombian Treaty Waters § 300.132 Lobster harvest limitations. (a) Berried lobsters. A berried (egg-bearing) lobster in treaty waters may not be...

Potential Ambient Energy-Harvesting Sources and Techniques

Science.gov (United States)

Yildiz, Faruk

2009-01-01

Ambient energy harvesting is also known as energy scavenging or power harvesting, and it is the process where energy is obtained from the environment. A variety of techniques are available for energy scavenging, including solar and wind powers, ocean waves, piezoelectricity, thermoelectricity, and physical motions. For example, some systems…

Modelling piezoelectric energy harvesting potential in an educational building

International Nuclear Information System (INIS)

Li, Xiaofeng; Strezov, Vladimir

2014-01-01

Highlights: • Energy harvesting potential of commercialized piezoelectric tiles is analyzed. • The parameters which will affect the energy harvesting efficiency are determined. • The potential could cover 0.5% of the total energy usage of the library building. • A simplified evaluation indicator is proposed to test the considered paving area. - Abstract: In this paper, potential application of a commercial piezoelectric energy harvester in a central hub building at Macquarie University in Sydney, Australia is examined and discussed. Optimization of the piezoelectric tile deployment is presented according to the frequency of pedestrian mobility and a model is developed where 3.1% of the total floor area with the highest pedestrian mobility is paved with piezoelectric tiles. The modelling results indicate that the total annual energy harvesting potential for the proposed optimized tile pavement model is estimated at 1.1 MW h/year. This potential energy generation may be further increased to 9.9 MW h/year with a possible improvement in piezoelectric energy conversion efficiency integrated into the system. This energy harvesting potential would be sufficient to meet close to 0.5% of the annual energy needs of the building. The study confirms that locating high traffic areas is critical for optimization of the energy harvesting efficiency, as well as the orientation of the tile pavement significantly affects the total amount of the harvested energy. A Density Flow evaluation is recommended in this study to qualitatively evaluate the piezoelectric power harvesting potential of the considered area based on the number of pedestrian crossings per unit time

Mechanised harvesting of short-rotation coppices

OpenAIRE

Vanbeveren, Stefan P.P.; Spinelli, Raffaele; Eisenbies, Mark; Schweier, Janine; Mola-Yudego, Blas; Magagnotti, Natascia; Acuna, Mauricio; Dimitriou, Ioannis; Ceulemans, Reinhart

2017-01-01

Abstract: Short-rotation coppice (SRC) is an important source of woody biomass for bioenergy. Despite the research carried out on several aspects of SRC production, many uncertainties create barriers to farmers establishing SRC plantations. One of the key economic sources of uncertainty is harvesting methods and costs; more specifically, the performance of contemporary machine methods is reviewed. We collected data from 25 literature references, describing 166 field trials. Three harvesting s...

Vibration produced by hand-held olive electrical harvesters

Directory of Open Access Journals (Sweden)

Emanuele Cerruto

2012-09-01

Full Text Available The paper reports the results of some laboratory and field tests aimed at assessing the acceleration levels transmitted to the hand-arm system by electric portable harvesters for olive. Four harvesting heads, different for shape and kinematic system, and five bars, different for diameter, length and material (aluminium and carbon fibre, were used in assembling eleven harvesters. The vibrations were measured in two points, next to the handgrips. The laboratory tests allowed the evaluation of the acceleration levels in standard controlled conditions, while the field tests allowed the assessing of the effects of the tree canopy with respect to the no load running. The laboratory tests showed that in reducing the vibration level plays a major role the kinematic system of the harvesting head and then the bar material. The classical flap-type harvester produced accelerations of around 20 m/s2, while by using a harvesting head with two parts in opposite movement, the accelerations were lowered to about 6 m/s2. The use of carbon fibres for the bars, besides the reduction in weight, produced also a reduction in acceleration (from 21 to 16 m/s2. The field tests proved that the tree canopy had a negative effect on the vibrations transmitted to the hand-arm system, especially when the aluminium bar of small diameter was used.

Study on Pyroelectric Harvesters Integrating Solar Radiation with Wind Power

Directory of Open Access Journals (Sweden)

Chun-Ching Hsiao

2015-07-01

Full Text Available Pyroelectric harvesters use temperature fluctuations to generate electrical outputs. Solar radiation and waste heat are rich energy sources that can be harvested. Pyroelectric energy converters offer a novel and direct energy-conversion technology by transforming time-dependent temperatures directly into electricity. Moreover, the great challenge for pyroelectric energy harvesting lies in finding promising temperature variations or an alternating thermal loading in real situations. Hence, in this article, a novel pyroelectric harvester integrating solar radiation with wind power by the pyroelectric effect is proposed. Solar radiation is a thermal source, and wind is a dynamic potential. A disk generator is used for harvesting wind power. A mechanism is considered to convert the rotary energy of the disk generator to drive a shutter for generating temperature variations in pyroelectric cells using a planetary gear system. The optimal period of the pyroelectric cells is 35 s to harvest the stored energy, about 70 μJ, while the rotary velocity of the disk generator is about 31 RPM and the wind speed is about 1 m/s. In this state, the stored energy acquired from the pyroelectric harvester is about 75% more than that from the disk generator. Although the generated energy of the proposed pyroelectric harvester is less than that of the disk generator, the pyroelectric harvester plays a complementary role when the disk generator is inactive in situations of low wind speed.

Machinery management data for willow harvest with a bio-baler

Energy Technology Data Exchange (ETDEWEB)

Savoie, P. [Agriculture and Agri-Food Canada, Quebec City, PQ (Canada); Hebert, P.L. [Laval Univ., Quebec City, PQ (Canada). Dept. des sols et de genie agroalimentaire; Robert, F.S. [Laval Univ., Quebec City, PQ (Canada). Sols et environnement

2010-07-01

Willow harvested in 2-to-3-year rotations has been touted as a reliable source of biomass. A newly designed harvester based on a round baler was developed in 2006. The third generation biobaler was evaluated in 2009 at 2 willow plantations in Quebec. The first site at Godmanchester was a three-year old regrowth with an estimated 52,000 stems/ha of large diameter willow. The biobaler with a flail cutter harvested three plots totalling 4,136 m{sup 2}. Total harvested biomass was 10.36 t DM in 42 bales. The harvest rate averaged 29 bale/h with an average bale size of 1.22 m wide by 1.30 m in diameter. Diesel fuel consumption averaged 0.81 L/bale. Measured losses averaged 11 per cent of the yield. The second site at Saint-Roch-del'Achigan was a two-year old growth with an estimated 49,000 stems/ha of large stem willow. The biobaler harvested seven plots totalling 15,740 m{sup 2}. Total harvest was 30.70 t DM in 148 bales. The first 14 bales were harvested with a saw blade header. All other bales were harvested with the flail cutter at a faster rate. Bale density averaged 129 kg DM/m{sup 3}. Fuel consumption averaged 0.72 L/bale. Losses averaged 20 per cent of the yield with the saw blade header.

Energy Harvesting Research: The Road from Single Source to Multisource.

Science.gov (United States)

Bai, Yang; Jantunen, Heli; Juuti, Jari

2018-06-07

Energy harvesting technology may be considered an ultimate solution to replace batteries and provide a long-term power supply for wireless sensor networks. Looking back into its research history, individual energy harvesters for the conversion of single energy sources into electricity are developed first, followed by hybrid counterparts designed for use with multiple energy sources. Very recently, the concept of a truly multisource energy harvester built from only a single piece of material as the energy conversion component is proposed. This review, from the aspect of materials and device configurations, explains in detail a wide scope to give an overview of energy harvesting research. It covers single-source devices including solar, thermal, kinetic and other types of energy harvesters, hybrid energy harvesting configurations for both single and multiple energy sources and single material, and multisource energy harvesters. It also includes the energy conversion principles of photovoltaic, electromagnetic, piezoelectric, triboelectric, electrostatic, electrostrictive, thermoelectric, pyroelectric, magnetostrictive, and dielectric devices. This is one of the most comprehensive reviews conducted to date, focusing on the entire energy harvesting research scene and providing a guide to seeking deeper and more specific research references and resources from every corner of the scientific community. © 2018 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Derriçadora portátil na colheita total e seletiva de frutos do cafeeiro Portable harvester in the total and selective harvesting of coffee fruits

Directory of Open Access Journals (Sweden)

Cristiano Márcio Alves de Souza

2006-11-01

Full Text Available O objetivo deste trabalho foi avaliar o desempenho de derriçadoras portáteis durante a colheita seletiva e total dos frutos, em dois sistemas de colheita. Foram determinados a carga pendente da planta, a capacidade de derriça, o índice de desfolha, a eficiência de derriça, o índice de frutos verdes no produto, o nível de ruído e o consumo horário e específico de combustível. O sistema de colheita, utilizando-se duas derriçadoras portáteis, simultaneamente na mesma fileira de cafeeiros, apresentou melhor desempenho. A colheita seletiva foi muito influenciada pela porcentagem de frutos maduros e carga pendente do cafeeiro.The objective of this work was to evaluate the performance of a portable coffee harvester to mountain areas. Two procedures were tested: harvesting all fruits in only one operation, and the selective harvesting. Coffee yield, harvesting capacity, index of leaves taken during harvesting process, harvesting efficiency, noise level and fuel consumption were measured. The harvesting system with two portable harvester presented better performance than with only one machine. Selective harvesting was highly influenced by the percentage of ripen fruits and by coffee yield.

Energy Harvesting from Aerodynamic Instabilities: Current prospect and Future Trends

Science.gov (United States)

Bashir, M.; Rajendran, P.; Khan, S. A.

2018-01-01

This paper evaluates the layout and advancement of energy harvesting based on aerodynamic instabilities of an aircraft. Vibration and thermoelectric energy harvesters are substantiated as most suitable alternative low-power sources for aerospace applications. Furthermore, the facility associated with the aircraft applications in harvesting the mechanical vibrations and converting it to electric energy has fascinated the researchers. These devices are designed as an alternative to a battery-based solution especially for small aircrafts, wireless structural health monitoring for aircraft systems, and harvester plates employed in UAVs to enhance the endurance and operational flight missions. We will emphasize on various sources of energy harvesting that are designed to come from aerodynamic flow-induced vibrations, specific attention is then given at those technologies that may offer, today or in the near future, a potential benefit to reduce both the cost and emissions of the aviation industry. The advancements achieved in the energy harvesting based on aerodynamic instabilities show very good scope for many piezoelectric harvesters in the field of aerospace, specifically green aviation technology in the future.

RF power harvesting: a review on designing methodologies and applications

Science.gov (United States)

Tran, Le-Giang; Cha, Hyouk-Kyu; Park, Woo-Tae

2017-12-01

Wireless power transmission was conceptualized nearly a century ago. Certain achievements made to date have made power harvesting a reality, capable of providing alternative sources of energy. This review provides a summ ary of radio frequency (RF) power harvesting technologies in order to serve as a guide for the design of RF energy harvesting units. Since energy harvesting circuits are designed to operate with relatively small voltages and currents, they rely on state-of-the-art electrical technology for obtaining high efficiency. Thus, comprehensive analysis and discussions of various designs and their tradeoffs are included. Finally, recent applications of RF power harvesting are outlined.

Setting analyst: A practical harvest planning technique

Science.gov (United States)

Olivier R.M. Halleux; W. Dale Greene

2001-01-01

Setting Analyst is an ArcView extension that facilitates practical harvest planning for ground-based systems. By modeling the travel patterns of ground-based machines, it compares different harvesting settings based on projected average skidding distance, logging costs, and site disturbance levels. Setting Analyst uses information commonly available to consulting...

Energy harvesting autonomous sensor systems design, analysis, and practical implementation

CERN Document Server

Tan, Yen Kheng

2013-01-01

This book is the considered the first to describe sensor-oriented energy harvesting issues. Its content is derived from the author's research on the development of a truly self-autonomous and sustainable energy harvesting wireless sensor network (EH-WSN). This network harvests energy from a variety of ambient energy sources and converts it into electrical energy to power batteries. The book discusses various types of energy harvesting (EH) systems and their respective main components.

Comparing classifiers for pronunciation error detection

NARCIS (Netherlands)

Strik, H.; Truong, K.; Wet, F. de; Cucchiarini, C.

2007-01-01

Providing feedback on pronunciation errors in computer assisted language learning systems requires that pronunciation errors be detected automatically. In the present study we compare four types of classifiers that can be used for this purpose: two acoustic-phonetic classifiers (one of which employs

Computer software to estimate timber harvesting system production, cost, and revenue

Science.gov (United States)

Dr. John E. Baumgras; Dr. Chris B. LeDoux

1992-01-01

Large variations in timber harvesting cost and revenue can result from the differences between harvesting systems, the variable attributes of harvesting sites and timber stands, or changing product markets. Consequently, system and site specific estimates of production rates and costs are required to improve estimates of harvesting revenue. This paper describes...

Single-molecule exploration of photoprotective mechanisms in light-harvesting complexes

NARCIS (Netherlands)

Yang, Hsiang Yu; Schlau-Cohen, Gabriela S.; Gwizdala, Michal; Krüger, Tjaart; Xu, Pengqi; Croce, Roberta; Van Grondelle, Rienk; Moerner, W. E.

2015-01-01

Plants harvest sunlight by converting light energy to electron flow through the primary events in photosynthesis. One important question is how the light harvesting machinery adapts to fluctuating sunlight intensity. As a result of various regulatory processes, efficient light harvesting and

Designs for thermal harvesting with nonlinear coordinate transformation

Science.gov (United States)

Ji, Qingxiang; Fang, Guodong; Liang, Jun

2018-04-01

In this paper a thermal concentrating design method was proposed based on the concept of generating function without knowing the needed coordinate transformation beforehand. The thermal harvesting performance was quantitatively characterized by heat concentrating efficiency and external temperature perturbation. Nonlinear transformations of different forms were employed to design high order thermal concentrators, and corresponding harvesting performances were investigated by numerical simulations. The numerical results shows that the form of coordinate transformation directly influences the distributions of heat flows inside the concentrator, consequently, influences the thermal harvesting behaviors significantly. The concentrating performance can be actively controlled and optimized by changing the form of coordinate transformations. The analysis in this paper offers a beneficial method to flexibly tune the harvesting performance of the thermal concentrator according to the requirements of practical applications.

Current status of AdS instability

CERN Multimedia

CERN. Geneva

2016-01-01

arXiv:1403.6471 and thoroughly developed in arXiv:1407.6273. On the other hand the negative cosmological constant allows for the existence of stable, time-periodic, asymptotically AdS solutions of Einstein equations [arXiv:1303.3186].

Combine Harvester Simulator

DEFF Research Database (Denmark)

Vilmann, Ole; Sørlie, James Arnold

1999-01-01

A simulator for training pilots in the operation of a modern high-tech combine harvester is presented. The new simulator application is based on DMI´s well-known DMS maritime simulator architecture. Two major challenges have been encountered in the development of the simulator: 1) interfacing the...

Pine Harvest Impact on Soil Structure of a Dystric Cambisol (Humic

Directory of Open Access Journals (Sweden)

Adriano da Costa

2016-01-01

Full Text Available ABSTRACT Traffic of heavy machinery at harvest and log extraction causes structural degradation of the soil, but studies on the effects of forest harvesting on soils with high organic matter content and exchangeable Al are scarce. The objective of this study was to evaluate the effect of mechanized forest harvesting operations on a Dystric Cambisol (Humic with high organic matter (more 50 g kg1 content and exchangeable Al (more 6,0 cmolc kg-1, reforested with Pinus taeda L. The evaluated harvesting system were the whole-tree, in which the feller-buncher cuts and lays the trees down in bundles; the skidder drags the tree bundles up near a road; and the harvester delimbs and cuts the trees into short logs, stacking them on the roadside to be loaded onto trucks. The areas were evaluated for soil conditions at pre-harvest, prior to harvest, and at post-harvest, consisting of areas of low disturbance, high disturbance, forest residues and log yards. The effects of compaction after forest harvesting are observed by the decrease in total porosity (especially biopores and macropores, soil saturated hydraulic conductivity, and stability of aggregates. After forest harvesting, soil compaction was observed in all evaluated situations, but with different depths depending on operation type and the intensity of traffic carried in each area.

A knee-mounted biomechanical energy harvester with enhanced efficiency and safety

Science.gov (United States)

Chen, Chao; Chau, Li Yin; Liao, Wei-Hsin

2017-06-01

Energy harvesting is becoming a major limiting issue for many portable devices. When undertaking any activity, the human body generates a significant amount of biomechanical energy, which can be collected by means of a portable energy harvester. This energy provides a method of powering portable devices such as prosthetic limbs. In this paper, a knee-mounted energy harvester with enhanced efficiency and safety is proposed and developed to convert mechanical energy into electricity during human motion. This device can change the bi-directional knee input into uni-directional rotation for an electromagnetic generator using a specially designed transmission system. Without the constraint of induced impact on the human body, this device can harvest biomechanical energy from both knee flexion and extension, improving the harvesting efficiency over previous single-direction energy harvesters. It can also provide protection from device malfunction, and increase the safety of current biomechanical energy harvesters. A highly compact and light prototype is developed taking into account human kinematics. The biomechanical energy harvesting system is also modeled and analyzed. The prototype is tested under different conditions including walking, running and climbing stairs, to evaluate the energy harvesting performance and effect on the human gait. The experimental results show that the prototype can harvest an average power of 3.6 W at 1.5 m s-1 walking speed, which is promising for portable electronic devices.

Loops in AdS from conformal field theory

Science.gov (United States)

Aharony, Ofer; Alday, Luis F.; Bissi, Agnese; Perlmutter, Eric

2017-07-01

We propose and demonstrate a new use for conformal field theory (CFT) crossing equations in the context of AdS/CFT: the computation of loop amplitudes in AdS, dual to non-planar correlators in holographic CFTs. Loops in AdS are largely unexplored, mostly due to technical difficulties in direct calculations. We revisit this problem, and the dual 1 /N expansion of CFTs, in two independent ways. The first is to show how to explicitly solve the crossing equations to the first subleading order in 1 /N 2, given a leading order solution. This is done as a systematic expansion in inverse powers of the spin, to all orders. These expansions can be resummed, leading to the CFT data for finite values of the spin. Our second approach involves Mellin space. We show how the polar part of the four-point, loop-level Mellin amplitudes can be fully reconstructed from the leading-order data. The anomalous dimensions computed with both methods agree. In the case of ϕ 4 theory in AdS, our crossing solution reproduces a previous computation of the one-loop bubble diagram. We can go further, deriving the four-point scalar triangle diagram in AdS, which had never been computed. In the process, we show how to analytically derive anomalous dimensions from Mellin amplitudes with an infinite series of poles, and discuss applications to more complicated cases such as the N = 4 super-Yang-Mills theory.

Productivity and cost of conventional understory biomass harvesting systems

Science.gov (United States)

Douglas E. Miller; Thomas J. Straka; Bryce J. Stokes; William Watson

1987-01-01

Conventional harvesting equipment was tested for removing forest understory biomass (energywood) for use as fuel. Two types of systems were tested--a one-pass system and a two-pass system. In the one-pass system, the energywood and pulpwood were harvested simultaneously. In the two-pass system, the energywood was harvested in a first pass through the stand, and the...

Simulating cut-to-length harvesting operations in Appalachian hardwoods

Science.gov (United States)

Jingxin Wang; Chris B. LeDoux; Yaoxiang Li

2005-01-01

Cut-to-length (CTL) harvesting systems involving small and large harvesters and a forwarder were simulated using a modular computer simulation model. The two harvesters simulated were a modified John Deere 988 tracked excavator with a single grip sawhead and a Timbco T425 based excavator with a single grip sawhead. The forwarder used in the simulations was a Valmet 524...

Relationship Between Site Disturbance and Forest Harvesting Equipment Traffic

Science.gov (United States)

Tim McDonald; Emily Carter; Steve Taylor; John Tobert

1998-01-01

A study was done to evaluate the use of global positioning systems (GPS) to track the position of forest harvesting equipment and use the information to assess site impacts. GPS units were attached to tree-length harvesting machinery in two clearcuts (1 feller-buncher, 2 skidders). Position of the equipment was recorded at 2-second intervals throughout the harvest of...

Architectures for wrist-worn energy harvesting

Science.gov (United States)

Rantz, R.; Halim, M. A.; Xue, T.; Zhang, Q.; Gu, L.; Yang, K.; Roundy, S.

2018-04-01

This paper reports the simulation-based analysis of six dynamical structures with respect to their wrist-worn vibration energy harvesting capability. This work approaches the problem of maximizing energy harvesting potential at the wrist by considering multiple mechanical substructures; rotational and linear motion-based architectures are examined. Mathematical models are developed and experimentally corroborated. An optimization routine is applied to the proposed architectures to maximize average power output and allow for comparison. The addition of a linear spring element to the structures has the potential to improve power output; for example, in the case of rotational structures, a 211% improvement in power output was estimated under real walking excitation. The analysis concludes that a sprung rotational harvester architecture outperforms a sprung linear architecture by 66% when real walking data is used as input to the simulations.

Classifier Fusion With Contextual Reliability Evaluation.

Science.gov (United States)

Liu, Zhunga; Pan, Quan; Dezert, Jean; Han, Jun-Wei; He, You

2018-05-01

Classifier fusion is an efficient strategy to improve the classification performance for the complex pattern recognition problem. In practice, the multiple classifiers to combine can have different reliabilities and the proper reliability evaluation plays an important role in the fusion process for getting the best classification performance. We propose a new method for classifier fusion with contextual reliability evaluation (CF-CRE) based on inner reliability and relative reliability concepts. The inner reliability, represented by a matrix, characterizes the probability of the object belonging to one class when it is classified to another class. The elements of this matrix are estimated from the -nearest neighbors of the object. A cautious discounting rule is developed under belief functions framework to revise the classification result according to the inner reliability. The relative reliability is evaluated based on a new incompatibility measure which allows to reduce the level of conflict between the classifiers by applying the classical evidence discounting rule to each classifier before their combination. The inner reliability and relative reliability capture different aspects of the classification reliability. The discounted classification results are combined with Dempster-Shafer's rule for the final class decision making support. The performance of CF-CRE have been evaluated and compared with those of main classical fusion methods using real data sets. The experimental results show that CF-CRE can produce substantially higher accuracy than other fusion methods in general. Moreover, CF-CRE is robust to the changes of the number of nearest neighbors chosen for estimating the reliability matrix, which is appealing for the applications.

Supersymmetric warped AdS in extended topologically massive supergravity

International Nuclear Information System (INIS)

Deger, N.S.; Kaya, A.; Samtleben, H.; Sezgin, E.

2014-01-01

We determine the most general form of off-shell N=(1,1) supergravity field configurations in three dimensions by requiring that at least one off-shell Killing spinor exists. We then impose the field equations of the topologically massive off-shell supergravity and find a class of solutions whose properties crucially depend on the norm of the auxiliary vector field. These are spacelike-squashed and timelike-stretched AdS 3 for the spacelike and timelike norms, respectively. At the transition point where the norm vanishes, the solution is null warped AdS 3 . This occurs when the coefficient of the Lorentz–Chern–Simons term is related to the AdS radius by μℓ=2. We find that the spacelike-squashed AdS 3 can be modded out by a suitable discrete subgroup of the isometry group, yielding an extremal black hole solution which avoids closed timelike curves

New supersymmetric AdS4 type II vacua

International Nuclear Information System (INIS)

Tsimpis, D.

2010-01-01

We review the supersymmetric AdS 4 x w M 6 backgrounds of type IIA/IIB supergravity constructed in[1]. In type IIA the supersymmetry is N=2, and the six-dimensional internal space is locally an S 2 bundle over a four-dimensional Kaehler-Einstein base; in IIB the internal space is the direct product of a circle and a five-dimensional squashed Sasaki-Einstein manifold. These backgrounds do not contain any sources, all fluxes (including the Romans mass in IIA) are generally non-zero, and the dilaton and warp factor are non-constant. The IIA solutions include the massive deformations of the IIA reduction of the eleven-dimensional AdS 4 x Y p,q solutions, and had been predicted to exist on the basis of the AdS 4 /CFT 3 correspondence. (Abstract Copyright [2010], Wiley Periodicals, Inc.)

Instantons from geodesics in AdS moduli spaces

Science.gov (United States)

Ruggeri, Daniele; Trigiante, Mario; Van Riet, Thomas

2018-03-01

We investigate supergravity instantons in Euclidean AdS5 × S5/ℤk. These solutions are expected to be dual to instantons of N = 2 quiver gauge theories. On the supergravity side the (extremal) instanton solutions are neatly described by the (lightlike) geodesics on the AdS moduli space for which we find the explicit expression and compute the on-shell actions in terms of the quantised charges. The lightlike geodesics fall into two categories depending on the degree of nilpotency of the Noether charge matrix carried by the geodesic: for degree 2 the instantons preserve 8 supercharges and for degree 3 they are non-SUSY. We expect that these findings should apply to more general situations in the sense that there is a map between geodesics on moduli-spaces of Euclidean AdS vacua and instantons with holographic counterparts.

Harvesting systems and costs for southern pine in the 1980s

Science.gov (United States)

Frederick W. Cubbage; James E. Granskog

1981-01-01

Timber harvesting systems and their costs are a major concern for the forest products industries. In this paper, harvest costs per cord are estimated, using computer simulation, for current southern pine harvesting systems. The estimations represent a range of mechanization levels. The sensitivity of systems to factors affecting harvest costs - machine costs, fuel...

50 CFR 680.21 - Crab harvesting cooperatives.

Science.gov (United States)

2010-10-01

... establishes an annual catch limit of crab that is based on the collective QS holdings of the members of the... the members of the crab harvesting cooperative. (2) Contents of application for annual crab harvesting... permit may appeal the IAD using the appeals procedures described in § 680.43. (c) Restrictions on fishing...

Manufacturing of Proteins and Antibodies: Chapter Downstream Processing Technologies : Harvest Operations.

Science.gov (United States)

Turner, Richard; Joseph, Adrian; Titchener-Hooker, Nigel; Bender, Jean

2017-08-04

Cell harvesting is the separation or retention of cells and cellular debris from the supernatant containing the target molecule Selection of harvest method strongly depends on the type of cells, mode of bioreactor operation, process scale, and characteristics of the product and cell culture fluid. Most traditional harvesting methods use some form of filtration, centrifugation, or a combination of both for cell separation and/or retention. Filtration methods include normal flow depth filtration and tangential flow microfiltration. The ability to scale down predictably the selected harvest method helps to ensure successful production and is critical for conducting small-scale characterization studies for confirming parameter targets and ranges. In this chapter we describe centrifugation and depth filtration harvesting methods, share strategies for harvest optimization, present recent developments in centrifugation scale-down models, and review alternative harvesting technologies.

Hierarchical mixtures of naive Bayes classifiers

NARCIS (Netherlands)

Wiering, M.A.

2002-01-01

Naive Bayes classifiers tend to perform very well on a large number of problem domains, although their representation power is quite limited compared to more sophisticated machine learning algorithms. In this pa- per we study combining multiple naive Bayes classifiers by using the hierar- chical

Protocol and Practice in the Adaptive Management of Waterfowl Harvests

Directory of Open Access Journals (Sweden)

Fred Johnson

1999-06-01

Full Text Available Waterfowl harvest management in North America, for all its success, historically has had several shortcomings, including a lack of well-defined objectives, a failure to account for uncertain management outcomes, and inefficient use of harvest regulations to understand the effects of management. To address these and other concerns, the U.S. Fish and Wildlife Service began implementation of adaptive harvest management in 1995. Harvest policies are now developed using a Markov decision process in which there is an explicit accounting for uncontrolled environmental variation, partial controllability of harvest, and structural uncertainty in waterfowl population dynamics. Current policies are passively adaptive, in the sense that any reduction in structural uncertainty is an unplanned by-product of the regulatory process. A generalization of the Markov decision process permits the calculation of optimal actively adaptive policies, but it is not yet clear how state-specific harvest actions differ between passive and active approaches. The Markov decision process also provides managers the ability to explore optimal levels of aggregation or "management scale" for regulating harvests in a system that exhibits high temporal, spatial, and organizational variability. Progress in institutionalizing adaptive harvest management has been remarkable, but some managers still perceive the process as a panacea, while failing to appreciate the challenges presented by this more explicit and methodical approach to harvest regulation. Technical hurdles include the need to develop better linkages between population processes and the dynamics of landscapes, and to model the dynamics of structural uncertainty in a more comprehensive fashion. From an institutional perspective, agreement on how to value and allocate harvests continues to be elusive, and there is some evidence that waterfowl managers have overestimated the importance of achievement-oriented factors in

A Supervised Multiclass Classifier for an Autocoding System

Directory of Open Access Journals (Sweden)

Yukako Toko

2017-11-01

Full Text Available Classification is often required in various contexts, including in the field of official statistics. In the previous study, we have developed a multiclass classifier that can classify short text descriptions with high accuracy. The algorithm borrows the concept of the naïve Bayes classifier and is so simple that its structure is easily understandable. The proposed classifier has the following two advantages. First, the processing times for both learning and classifying are extremely practical. Second, the proposed classifier yields high-accuracy results for a large portion of a dataset. We have previously developed an autocoding system for the Family Income and Expenditure Survey in Japan that has a better performing classifier. While the original system was developed in Perl in order to improve the efficiency of the coding process of short Japanese texts, the proposed system is implemented in the R programming language in order to explore versatility and is modified to make the system easily applicable to English text descriptions, in consideration of the increasing number of R users in the field of official statistics. We are planning to publish the proposed classifier as an R-package. The proposed classifier would be generally applicable to other classification tasks including coding activities in the field of official statistics, and it would contribute greatly to improving their efficiency.

Production economics of harvesting small-diameter hardwood stands in central Appalachia

Science.gov (United States)

Yaoxiang Li; Jingxin Wang; Gary Miller; Joe McNeel

2006-01-01

Three harvesting systems of chainsaw/cable skidder, feller-buncher/grapple skidder, and harvester/forwarder were simulated in harvesting three hardwood stands 30 to 50 years old in central Appalachia. Stands were generated by using a 3D stand generator. Harvesting prescriptions included clearcut, shelterwood cut, selective cut, diameter limit cut, and crop tree release...

The role of energy losses in photosynthetic light harvesting

International Nuclear Information System (INIS)

Krüger, T P J; Van Grondelle, R

2017-01-01

Photosynthesis operates at the bottom of the food chain to convert the energy of light into carbohydrates at a remarkable global rate of about 130 TW. Nonetheless, the overall photosynthetic process has a conversion efficiency of a few percent at best, significantly less than bottom-up photovoltaic cells. The primary photosynthetic steps, consisting of light harvesting and charge separation, are often presented as having near-unity quantum efficiency but this holds only true under ideal conditions. In this review, we discuss the importance of energy loss mechanisms to establish robustness in photosynthetic light harvesting. Thermal energy dissipation of light-harvesting complexes (LHCs) in different environments is investigated and the relationships and contrasts between concentration quenching of high pigment concentrations, photoprotection (non-photochemical quenching), quenching due to protein aggregation, and fluorescence blinking are discussed. The role of charge-transfer states in light harvesting and energy dissipation is highlighted and the importance of controlled protein structural disorder to switch the light-harvesting antennae between effective light harvesters and efficient energy quenchers is underscored. The main LHC of plants, LHCII, is used as a prime example. (topical review)

FOREST HARVEST SCHEDULING PLAN INTEGRATED TO THE ROAD NETWORK

Directory of Open Access Journals (Sweden)

Pedro Henrique Belavenutti Martins da Silva

2016-03-01

Full Text Available In industrial forest plantations, the spatial distribution of management units for harvest scheduling influences the timber production cost and the non-renewable resources consumption, due to issues related to transport logistic. In this context, this research aimed to formulate Integer Linear Programming (ILP by means of the application of Floyd-Warshall network optimization algorithm to generate timber production routes, minimizing the production costs resulting from harvest activities and forest road maintenance. Then, scenarios were simulated considering different minimal harvest ages for Pinus spp. and Eucalyptus spp. stands. The planning horizon was five years with annual periodicity. The study area was 23,330 hectares of forests, located in Paraná state (southern Brazil. We compared the simulated scenarios according to the following parameter indicators: harvest income, building road network and the production unit cost. The decreasing of the minimal harvest age reduces the mean production of management units scheduled to be harvested, in other hand, it requires fewer roads to be built, and consequently increases the production unit cost. The solutions obtained by using ILP models presented an optimality gap lower than 0.1%.

Finite element analysis of hybrid energy harvesting of piezoelectric and electromagnetic

Directory of Open Access Journals (Sweden)

Muhammad Yazid Muhammad Ammar Faris

2017-01-01

Full Text Available Harvesting energy from ambient vibrations is a highly required method because of the wide range of available sources that produce vibration energy application from industrial machinery to human motion application. In this paper, the implementation of harvesting energy from two technologies to form a hybrid energy harvester system was analyzed. These two technologies involve the piezoelectric harvesting energy and the electromagnetic harvesting energy. A finite element model was developed using the Ansys software with the harmonic analysis solver to analyze and examine hybrid harvesting energy system. Both power output generated from the magnet and the piezoelectric is then combined to form one unit of energy. Further, it was found that the result shows the system generate the maximum power output of 14.85 μW from 100 Hz, 4.905 m/s2, and 0.6 cm3 for resonance frequency, acceleration, and the volume respectively from the optimal energy harvester design. Normalized Power Density (NPD result of 10.29 kgs/m3 comparable with other literature also can be used in energy harvesting system for vibration application.

Solid phase bio-electrofermentation of food waste to harvest value-added products associated with waste remediation.

Science.gov (United States)

Chandrasekhar, K; Amulya, K; Mohan, S Venkata

2015-11-01

A novel solid state bio-electrofermentation system (SBES), which can function on the self-driven bioelectrogenic activity was designed and fabricated in the laboratory. SBES was operated with food waste as substrate and evaluated for simultaneous production of electrofuels viz., bioelectricity, biohydrogen (H2) and bioethanol. The system illustrated maximum open circuit voltage and power density of 443 mV and 162.4 mW/m(2), respectively on 9 th day of operation while higher H2 production rate (21.9 ml/h) was observed on 19th day of operation. SBES system also documented 4.85% w/v bioethanol production on 20th day of operation. The analysis of end products confirmed that H2 production could be generally attributed to a mixed acetate/butyrate-type of fermentation. Nevertheless, the presence of additional metabolites in SBES, including formate, lactate, propionate and ethanol, also suggested that other metabolic pathways were active during the process, lowering the conversion of substrate into H2. SBES also documented 72% substrate (COD) removal efficiency along with value added product generation. Continuous evolution of volatile fatty acids as intermediary metabolites resulted in pH drop and depicted its negative influence on SBES performance. Bio-electrocatalytic analysis was carried out to evaluate the redox catalytic capabilities of the biocatalyst. Experimental data illustrated that solid-state fermentation can be effectively integrated in SBES for the production of value added products with the possibility of simultaneous solid waste remediation. Copyright © 2015 Elsevier Ltd. All rights reserved.

Effects of maize maturity at harvest and dietary proportion of maize silage on intake and performance of growing/finishing bulls

DEFF Research Database (Denmark)

Zaralis, K.; Nørgaard, P.; Helander, C.

2014-01-01

Whole-crop maize silage as forage in diets of finishing cattle can promote high intakes and thus, enhances animal performance. In the present study we evaluated the effect of whole-crop maize maturity at harvest and the proportion of maize-silage in diets of finishing bulls, on feed intake...... of treatments, involving two maturity stages of maize at harvest (i.e. dough stage or dent stage) and two maize silage proportions (i.e. 100% maize silage or 50% maize and 50% grass silage). The diets were offered ad libitum as total mixed rations (TMRs) with inclusion of concentrates (i.e. rolled barley; dried...... distillers’ grain plus soluble; cold-pressed rapeseed cake) in a 40% proportion on DM basis. All animals were slaughtered at a target body weight of 630 kg. Bulls fed on diets containing maize silage as sole forage achieved higher live-weight gain (P

Integrated energy wood and pulpwood harvesting in first-thinning stands

Energy Technology Data Exchange (ETDEWEB)

Kaerhae, K.; Pajuoja, H. (Metsaeteho Oy, Helsinki (Finland)), Email: kalle.karha@metsateho.fi, Email: heikki.pajuoja@metsateho.fi; Hoegnaes, T. (Metsaehallitus, Kajaani (Finland)), Email: tore.hognas@metsa.fi; Mutikainen, A. (TTS Research, Rajamaeki (Finland)), Email: arto.mutikainen@tts.fi

2009-07-01

The integrated harvesting of industrial roundwood and energy wood by the so-called 'two-pile cutting method' has increased strongly in young forests in Finland during the last two years. The studies carried out by Metsaeteho Oy, Metsaehallitus and TTS Research (I) determined the time consumption and productivity in cutting work when using the integrated cutting of first-thinning wood, (II) clarified the development of the total removal in integrated harvesting operation, and (III) investigated the quality of pulpwood poles when using integrated the quality of pulpwood poles when using integrated cutting with multi-tree handling. The studies indicated that the total removal in integrated wood harvesting increases significantly compared to that of conventional, separate roundwood harvesting. When the total removal from the harvesting site increased considerably, there was a significant increase in the productivity of cutting work in integrated wood harvesting compared to the situation in separate pulpwood harvesting. In addition, the delimbing quality and bucking accuracy of the pulpwood poles obtained in multi-tree processing were comparable to those produced in single-tree handling. There were no problems with measuring the work output by a grapple scale attached to the boom of the forwarder. As the studies indicated very promising experiences in integrated wood cutting, integrated harvesting is likely to continue to increase in both first and later thinning in Finland. (orig.)

A vibration energy harvesting device with bidirectional resonance frequency tunability

International Nuclear Information System (INIS)

Challa, Vinod R; Prasad, M G; Shi Yong; Fisher, Frank T

2008-01-01

Vibration energy harvesting is an attractive technique for potential powering of wireless sensors and low power devices. While the technique can be employed to harvest energy from vibrations and vibrating structures, a general requirement independent of the energy transfer mechanism is that the vibration energy harvesting device operate in resonance at the excitation frequency. Most energy harvesting devices developed to date are single resonance frequency based, and while recent efforts have been made to broaden the frequency range of energy harvesting devices, what is lacking is a robust tunable energy harvesting technique. In this paper, the design and testing of a resonance frequency tunable energy harvesting device using a magnetic force technique is presented. This technique enabled resonance tuning to ± 20% of the untuned resonant frequency. In particular, this magnetic-based approach enables either an increase or decrease in the tuned resonant frequency. A piezoelectric cantilever beam with a natural frequency of 26 Hz is used as the energy harvesting cantilever, which is successfully tuned over a frequency range of 22–32 Hz to enable a continuous power output 240–280 µW over the entire frequency range tested. A theoretical model using variable damping is presented, whose results agree closely with the experimental results. The magnetic force applied for resonance frequency tuning and its effect on damping and load resistance have been experimentally determined

Constrained supermanifolds for AdS M-theory backgrounds

International Nuclear Information System (INIS)

Fre, Pietro; Grassi, Pietro Antonio

2008-01-01

A long standing problem is the supergauge completion of AdS 4 x ({G/H}) 7 or AdS 5 x ({G/H}) 5 backgrounds which preserve less then maximal supersymmetry. In parallel with the supersolvable realization of the AdS 4 x S 7 background based on κ-symmetry, we develop a technique which amounts to solving the above-mentioned problem in a way useful for pure spinor quantization for supermembranes and superstrings. Instead of gauge fixing some of the superspace coordinates using κ-symmetry, we impose an additional constraint on them reproducing the simplifications of the supersolvable representations. The constraints are quadratic, homogeneous, Sp(4,R)-covariant, and consistent from the quantum point of view in the pure spinor approach. Here we provide the geometrical solution which, in a subsequent work, will be applied to the membrane and the superstring sigma models

Design and fabrication of an energy-harvesting device using vibration absorber

Science.gov (United States)

Heidari, Hamidreza; Afifi, Arash

2017-05-01

Energy-harvesting devices collect energy that is being wasted and convert to the electrical energy. For this reason, this type of devices is considered as a convenient alternative to traditional batteries. In this paper, experimental examinations were performed to investigate the application of harvesting device for the reduction of the vibration amplitude in a vibration system and also increase the efficiency of energy-harvesting device. This study focuses on the energy-harvesting device as both producing electrical device and a vibration disabled absorber. In this regard, a motion-based energy-harvesting device is designed to produce electrical energy and also eliminate vibrations of a two joint-end beam which is located under the harmonic excitation force. Then, the governing equations of the forced motion on the main beam are derived and energy-harvesting system are simulated. In addition, the system designed by MATLAB simulation is explained and its results are expressed. Finally, a prototype of the system was made and the ability of the energy-harvesting device to absorb the original system vibrations, as well as parameters impact on the efficiency of energy harvesting is investigated. Experimental results show that the energy-harvesting device, in addition to producing electric current with a maximum value of 1.5V, reduces 94% of the original system vibrations.

PREDICTIVE MODEL FOR THE ADDED VALUE OF SULTANA SEEDLESS GRAPE PRODUCTION

Directory of Open Access Journals (Sweden)

Umut Burak Geyikci

2015-07-01

Full Text Available Turkey after USA is the second important raisin grape producer by cv “Sultana”in the world (Kara,2014. The Manisa district alone accounts for 31% of totalgrape production and 80% of the whole sultana seedless raisin grape production inTurkey. 95% of total grape output generated in Manisa is made up of Sultanaseedless grape(TUIK, 2012. In thisstudy, the added value of grape production inManisa has been calculated and according to the findings, the per capita addedvalue of grape production has been computed. In order to calculate the addedvalue of grape production in Manisa, costs of labor, fuel, fertilizer, disinfection,hormone, repair and maintenance of the businesses around have been investigated.After calculated costs had been deducted from total business income, the totaladded value of grape production in Manisa and the per capita added valueofgrape production in Manisa were attained The efficiency per hectare in the sampleproduction units, which was investigated during the field research, measures up to26.470 kg. The percentile distributions of cost items at this efficiency level are;27,8% fuel costs, 23,2% fertilizing costs, 19,9% irrigation costs, 11,4%disinfection costs, 7,5% hormone usage costs, 4,6% harvesting and transportingcosts and the rest consists of maintenance costs. When the costs are deducted from income per hectare (11.646 USD, the added value per hectare turns out to be8843 USD

Wideband quin-stable energy harvesting via combined nonlinearity

Directory of Open Access Journals (Sweden)

Chen Wang

2017-04-01

Full Text Available In this work, we propose a wideband quintuple-well potential piezoelectric-based vibration energy harvester using a combined nonlinearity: the magnetic nonlinearity induced by magnetic force and the piecewise-linearity produced by mechanical impact. With extra stable states compared to other multi-stable harvesters, the quin-stable harvester can distribute its potential energy more uniformly, which provides shallower potential wells and results in lower excitation threshold for interwell motion. The mathematical model of this quin-stable harvester is derived and its equivalent piecewise-nonlinear restoring force is measured in the experiment and identified as piecewise polynomials. Numerical simulations and experimental verifications are performed in different levels of sinusoid excitation ranging from 1 to 25 Hz. The results demonstrate that, with lower potential barriers compared with tri-stable counterpart, the quin-stable arrangement can escape potential wells more easily for doing high-energy interwell motion over a wider band of frequencies. Moreover, by utilizing the mechanical stoppers, this harvester can produce significant output voltage under small tip deflections, which results in a high power density and is especially suitable for a compact MEMS approach.

Design optimization of PVDF-based piezoelectric energy harvesters

Directory of Open Access Journals (Sweden)

Jundong Song

2017-09-01

Full Text Available Energy harvesting is a promising technology that powers the electronic devices via scavenging the ambient energy. Piezoelectric energy harvesters have attracted considerable interest for their high conversion efficiency and easy fabrication in minimized sensors and transducers. To improve the output capability of energy harvesters, properties of piezoelectric materials is an influential factor, but the potential of the material is less likely to be fully exploited without an optimized configuration. In this paper, an optimization strategy for PVDF-based cantilever-type energy harvesters is proposed to achieve the highest output power density with the given frequency and acceleration of the vibration source. It is shown that the maximum power output density only depends on the maximum allowable stress of the beam and the working frequency of the device, and these two factors can be obtained by adjusting the geometry of piezoelectric layers. The strategy is validated by coupled finite-element-circuit simulation and a practical device. The fabricated device within a volume of 13.1 mm3 shows an output power of 112.8 μW which is comparable to that of the best-performing piezoceramic-based energy harvesters within the similar volume reported so far.

Logarithmic learning for generalized classifier neural network.

Science.gov (United States)

Ozyildirim, Buse Melis; Avci, Mutlu

2014-12-01

Generalized classifier neural network is introduced as an efficient classifier among the others. Unless the initial smoothing parameter value is close to the optimal one, generalized classifier neural network suffers from convergence problem and requires quite a long time to converge. In this work, to overcome this problem, a logarithmic learning approach is proposed. The proposed method uses logarithmic cost function instead of squared error. Minimization of this cost function reduces the number of iterations used for reaching the minima. The proposed method is tested on 15 different data sets and performance of logarithmic learning generalized classifier neural network is compared with that of standard one. Thanks to operation range of radial basis function included by generalized classifier neural network, proposed logarithmic approach and its derivative has continuous values. This makes it possible to adopt the advantage of logarithmic fast convergence by the proposed learning method. Due to fast convergence ability of logarithmic cost function, training time is maximally decreased to 99.2%. In addition to decrease in training time, classification performance may also be improved till 60%. According to the test results, while the proposed method provides a solution for time requirement problem of generalized classifier neural network, it may also improve the classification accuracy. The proposed method can be considered as an efficient way for reducing the time requirement problem of generalized classifier neural network. Copyright © 2014 Elsevier Ltd. All rights reserved.

Architecture-independent power bound for vibration energy harvesters

International Nuclear Information System (INIS)

Halvorsen, E; Le, C P; Mitcheson, P D; Yeatman, E M

2013-01-01

The maximum output power of energy harvesters driven by harmonic vibrations is well known for a range of specific harvester architectures. An architecture-independent bound based on the mechanical input-power also exists and gives a strict limit on achievable power with one mechanical degree of freedom, but is a least upper bound only for lossless devices. We report a new theoretical bound on the output power of vibration energy harvesters that includes parasitic, linear mechanical damping while still being architecture independent. This bound greatly improves the previous bound at moderate force amplitudes and is compared to the performance of established harvester architectures which are shown to agree with it in limiting cases. The bound is a hard limit on achievable power with one mechanical degree of freedom and can not be circumvented by transducer or power-electronic-interface design

Ultra-processed foods and added sugars in the Chilean diet (2010).

Science.gov (United States)

Cediel, Gustavo; Reyes, Marcela; da Costa Louzada, Maria Laura; Martinez Steele, Euridice; Monteiro, Carlos A; Corvalán, Camila; Uauy, Ricardo

2018-01-01

To assess the consumption of ultra-processed foods and analyse its association with the content of added sugars in the Chilean diet. Cross-sectional study of national dietary data obtained through 24 h recalls and classified into food groups according to the extent and purpose of food processing (NOVA classification). Chile. A probabilistic sample of 4920 individuals (aged 2 years or above) studied in 2010 by a national dietary survey (Encuesta Nacional de Consumo Alimentario). Ultra-processed foods represented 28·6 (se 0·5) % of total energy intake and 58·6 (se 0·9) % of added sugars intake. The mean percentage of energy from added sugars increased from 7·7 (se 0·3) to 19·7 (se 0·5) % across quintiles of the dietary share of ultra-processed foods. After adjusting for several potential sociodemographic confounders, a 5 percentage point increase in the dietary share of ultra-processed foods determined a 1 percentage point increase in the dietary content of added sugars. Individuals in the highest quintile were three times more likely (OR=2·9; 95 % CI 2·4, 3·4) to exceed the 10 % upper limit for added sugars recommended by the WHO compared with those in the lowest quintile, after adjusting for sociodemographic variables. This association was strongest among individuals aged 2-19 years (OR=3·9; 95 % CI 2·7, 5·9). In Chile, ultra-processed foods are important contributors to total energy intake and to the consumption of added sugars. Actions aimed at limiting consumption of ultra-processed foods are being implemented as effective ways to achieve WHO dietary recommendations to limit added sugars and processed foods, especially for children and adolescents.

A triple hybrid micropower generator with simultaneous multi-mode energy harvesting

Science.gov (United States)

Uluşan, H.; Chamanian, S.; Pathirana, W. P. M. R.; Zorlu, Ö.; Muhtaroğlu, A.; Külah, H.

2018-01-01

This study presents a triple hybrid energy harvesting system that combines harvested power from thermoelectric (TE), vibration-based electromagnetic (EM) and piezoelectric (PZT) harvesters into a single DC supply. A power management circuit is designed and implemented in 180 nm standard CMOS technology based on the distinct requirements of each harvester, and is terminated with a Schottky diode to avoid reverse current flow. The system topology hence supports simultaneous power generation and delivery from low and high frequency vibrations as well as temperature differences in the environment. The ultra-low DC voltage harvested from TE generator is boosted with a cross-coupled charge-pump driven by an LC oscillator with fully-integrated center-tapped differential inductors. The EM harvester output was rectified with a self-powered and low drop-out AC/DC doubler circuit. The PZT interface electronics benefits from peak-to-peak cycle of the harvested voltage through a negative voltage converter followed by synchronous power extraction and DC-to-DC conversion through internal switches, and an external inductor. The hybrid system was tested with a wearable in-house EM energy harvester placed wrist of a jogger, a commercial low volume PZT harvester, and DC supply as the TE generator output. The system generates more than 1.2 V output for load resistances higher than 50 kΩ, which corresponds to 24 μW to power wearable sensors. Simultaneous multi-mode operation achieves higher voltage and power compared to stand-alone harvesting circuits, and generates up to 110 μW of output power. This is the first hybrid harvester circuit that simultaneously extracts energy from three independent sources, and delivers a single DC output.

West Virginia harvest and utilization study, 2008

Science.gov (United States)

Jan Wiedenbeck; Shawn. Grushecky

2014-01-01

Thirty active harvesting operations were part of a harvest and utilization study conducted in West Virginia in 2008. Data were collected on roundwood product and residue yields obtained from trees of different sizes, species, and qualities. This study was modeled after studies conducted on a regular and frequent basis by the Forest Inventory and Analysis unit in the...

Hybrid acoustic energy harvesting using combined electromagnetic and piezoelectric conversion

Science.gov (United States)

Khan, Farid Ullah; Izhar

2016-02-01

This paper reports a novel hybrid acoustic energy harvester. The harvester utilizes both the electromagnetic and piezoelectric conversion mechanisms simultaneously to convert the ambient acoustical noise into electrical power for self-powered wireless sensor nodes. The proposed harvester is comprised of a Helmholtz resonator, two magnets mounted on a piezoelectric plate, and a wound coil located under the magnets. The harvester is characterized both under harmonic and real random acoustical excitations. In-lab, under harmonic acoustical excitation at a sound pressure level of 130 dB and frequency of 2.1 kHz, an optimum power of 2.86 μW (at 114 Ω optimum load) is obtained from electromagnetic conversion and 50 μW (at 1000 Ω optimum load) is generated by the piezoelectric harvester's part. Moreover, in real acoustical environment of a domestic electric generator the peak voltages of 40 and 123 mV are produced by the electromagnetic and piezoelectric portions of the acoustic energy harvester.

Harvesting Method Affects Water Dynamics and Yield of Sweet Orange with Huanglongbing

Directory of Open Access Journals (Sweden)

Said A. Hamido

2018-03-01

Full Text Available Changes in grove management practices may change crop water dynamics. The objective of this study was to estimate sap flow, stem water potential (Ψstem, and citrus yield as affected by harvesting methods in sweet orange (Citrus sinensis trees affected by Huanglongbing. The study was initiated in March 2015 for two years on five-year-old commercial sweet orange trees at a commercial grove located at Felda, Florida (26.61° N, 81.48° W on Felda fine sand soil (Loamy, siliceous, superactive, hyperthermic Arenic Endoaqualfs. All measurements were replicated before and after harvest in four experiments (A, B, C and D under hand and mechanical harvesting treatments. Sap flow measurements were taken on four trees per treatment with two sensors per tree. Sap flow measured by the heat balance method at hourly intervals during March and April of 2015 and 2016 significantly declined after harvesting by 25% and 35% after hand and mechanical harvesting, respectively. Ψstem measured after harvest was significantly higher than measurements before harvest. The average value of Ψstem measured increased by 10% and 6% after hand and mechanical harvesting, respectively. Mechanical harvesting exhibited lower fruit yields that averaged between 83%, 63%, 49% and 36% of hand-harvested trees under A, B, C and D experiments, respectively. It is concluded that the hand harvesting method is less stressful and less impactful on tree water uptake and fruit yield compared with mechanical harvesting.

Noncommutative D-branes from covariant AdS superstring

International Nuclear Information System (INIS)

Sakaguchi, Makoto; Yoshida, Kentaroh

2008-01-01

We study noncommutative (NC) D-branes on AdS 5 xS 5 from κ-invariance of covariant Green-Schwarz action of an open string with a non-trivial world-volume flux. Finding boundary conditions to ensure the κ-invariance, we can see possible configurations of the NC D-branes. With this method 1/4 BPS NC D-branes are discussed. The resulting NC Dp-branes are 1/4 BPS at arbitrary position other than the p=1 case. The exceptional D-string is 1/2 BPS at the origin and 1/4 BPS outside the origin. Those are reduced to possible 1/4 BPS or 1/2 BPS AdS D-branes in the commutative limit. The same analysis is applied to an open superstring in a pp-wave and leads to 1/4 BPS configurations of NC D-branes. These D-branes are consistently obtained from AdS D-branes via the Penrose limit

Reliability evaluation and analysis of sugarcane 7000 series harvesters in sugarcane harvesting

Directory of Open Access Journals (Sweden)

P Najafi

2015-09-01

Full Text Available Introduction: The performance of agricultural machines depends on the reliability of the equipment used, the maintenance efficiency, the operation process, the technical expertise of workers, etc. As the size and complexity of agricultural equipment continue to increase, the implications of equipment failure become even more critical. Machine failure probability is (1-R and R is machine reliability (Vafaei et al., 2010. Moreover, system reliability is the probability that an item will perform a required function without failure under stated conditions for a stated period of time (Billinton and Allan, 1992. Therefore, we must be able to create an appropriate compromise between maintenance methods and acceptable reliability levels. Precision failure data gathering in a farm is a worthwhile work, because these can represent a good estimate of machine reliability combining the effects of machine loading, surrounding effects and incorrect repair and maintenance. Each machine based on its work conditions, parts combinationand manufacturing process follows a failures distribution function depending on the environment where the machine work and the machine’s specifications (Meeker and Escobar, 1998. General failures distributions for contiguous data are normal, log-normal, exponential and Weibull (Shirmohamadi, 2002. Each machine can represent proportionate behavior with these functions in short or long time. Materials and methods: The study area was the Hakim Farabi agro-industry Company located 35 kilometers south of Ahvaz in Iran. Arable lands of this company are located in 31 to 31°10 N latitude and 45 to 48°36 E longitudes. The region has dry and warm climate. A total of 24 Austoft 7000 sugarcane chopper harvester are being used in the company. Cane harvesters were divided into 3 group consisting of old, middle aged and new. From each group, one machine was chosen. Data from maintenance reports of harvesters which have been recorded within 400

DECISION TREE CLASSIFIERS FOR STAR/GALAXY SEPARATION

International Nuclear Information System (INIS)

Vasconcellos, E. C.; Ruiz, R. S. R.; De Carvalho, R. R.; Capelato, H. V.; Gal, R. R.; LaBarbera, F. L.; Frago Campos Velho, H.; Trevisan, M.

2011-01-01

We study the star/galaxy classification efficiency of 13 different decision tree algorithms applied to photometric objects in the Sloan Digital Sky Survey Data Release Seven (SDSS-DR7). Each algorithm is defined by a set of parameters which, when varied, produce different final classification trees. We extensively explore the parameter space of each algorithm, using the set of 884,126 SDSS objects with spectroscopic data as the training set. The efficiency of star-galaxy separation is measured using the completeness function. We find that the Functional Tree algorithm (FT) yields the best results as measured by the mean completeness in two magnitude intervals: 14 ≤ r ≤ 21 (85.2%) and r ≥ 19 (82.1%). We compare the performance of the tree generated with the optimal FT configuration to the classifications provided by the SDSS parametric classifier, 2DPHOT, and Ball et al. We find that our FT classifier is comparable to or better in completeness over the full magnitude range 15 ≤ r ≤ 21, with much lower contamination than all but the Ball et al. classifier. At the faintest magnitudes (r > 19), our classifier is the only one that maintains high completeness (>80%) while simultaneously achieving low contamination (∼2.5%). We also examine the SDSS parametric classifier (psfMag - modelMag) to see if the dividing line between stars and galaxies can be adjusted to improve the classifier. We find that currently stars in close pairs are often misclassified as galaxies, and suggest a new cut to improve the classifier. Finally, we apply our FT classifier to separate stars from galaxies in the full set of 69,545,326 SDSS photometric objects in the magnitude range 14 ≤ r ≤ 21.

Investigation of timber harvesting mechanization progress in Turkey ...

African Journals Online (AJOL)

Log in or Register to get access to full text downloads. ... of substantial number of harvesters, the amount of modern harvesting processor in Turkey is not sufficient. Different type and marked machines have not been taken into consideration to ...

New neural network classifier of fall-risk based on the Mahalanobis distance and kinematic parameters assessed by a wearable device

International Nuclear Information System (INIS)

Giansanti, Daniele; Macellari, Velio; Maccioni, Giovanni

2008-01-01

Fall prevention lacks easy, quantitative and wearable methods for the classification of fall-risk (FR). Efforts must be thus devoted to the choice of an ad hoc classifier both to reduce the size of the sample used to train the classifier and to improve performances. A new methodology that uses a neural network (NN) and a wearable device are hereby proposed for this purpose. The NN uses kinematic parameters assessed by a wearable device with accelerometers and rate gyroscopes during a posturography protocol. The training of the NN was based on the Mahalanobis distance and was carried out on two groups of 30 elderly subjects with varying fall-risk Tinetti scores. The validation was done on two groups of 100 subjects with different fall-risk Tinetti scores and showed that, both in terms of specificity and sensitivity, the NN performed better than other classifiers (naive Bayes, Bayes net, multilayer perceptron, support vector machines, statistical classifiers). In particular, (i) the proposed NN methodology improved the specificity and sensitivity by a mean of 3% when compared to the statistical classifier based on the Mahalanobis distance (SCMD) described in Giansanti (2006 Physiol. Meas. 27 1081–90); (ii) the assessed specificity was 97%, the assessed sensitivity was 98% and the area under receiver operator characteristics was 0.965. (note)

Shell cracking strength in almond (Prunus dulcis [Mill.] D.A. Webb.) and its implication in uses as a value-added product.

Science.gov (United States)

Ledbetter, C A

2008-09-01

Researchers are currently developing new value-added uses for almond shells, an abundant agricultural by-product. Almond varieties are distinguished by processors as being either hard or soft shelled, but these two broad classes of almond also exhibit varietal diversity in shell morphology and physical characters. By defining more precisely the physical and chemical characteristics of almond shells from different varieties, researchers will better understand which specific shell types are best suited for specific industrial processes. Eight diverse almond accessions were evaluated in two consecutive harvest seasons for nut and kernel weight, kernel percentage and shell cracking strength. Shell bulk density was evaluated in a separate year. Harvest year by almond accession interactions were highly significant (p0.01) for each of the analyzed variables. Significant (p0.01) correlations were noted for average nut weight with kernel weight, kernel percentage and shell cracking strength. A significant (p0.01) negative correlation for shell cracking strength with kernel percentage was noted. In some cases shell cracking strength was independent of the kernel percentage which suggests that either variety compositional differences or shell morphology affect the shell cracking strength. The varietal characterization of almond shell materials will assist in determining the best value-added uses for this abundant agricultural by-product.

Evaluating timber harvesting impacts on wildlife habitat suitability using FOREX

Science.gov (United States)

Chris B. LeDoux

1997-01-01

Precommercial, commercial, and final harvesting operations can impact wildlife habitat suitability by altering the vegetation composition on a given site. Harvesting operations remove trees and many times provide the necessary perturbation to trigger successional conditions different from those that existed prior to the harvest. Although these new successional changes...

TRANSMISSION OF IMPACTS DURING MECHANICAL GRAPE HARVESTING AND TRANSPORTATION

Directory of Open Access Journals (Sweden)

Fabio Pezzi

2008-09-01

Full Text Available The aim of the research was to study vibrational stress on grapes during mechanical harvesting, transfer and delivery to the winery, in order to identify the most critical stages and the consequent effects on the winemaking. An instrumented sphere was used to evaluate and memorise the impacts in the grape harvester and means of transport. Three treatments, obtained by differing harvesting method (manual and mechanical and transport type (short and long distance, were compared. A correlation was sought between the transmitted stresses and characteristics of the harvested product. The effects on product quality were evaluated by chemical analyses of the musts and sensorial analysis of the end-product, vinified using the same procedure.

Harvesting Atlantic Cod under Climate Variability

Science.gov (United States)

Oremus, K. L.

2016-12-01

Previous literature links the growth of a fishery to climate variability. This study uses an age-structured bioeconomic model to compare optimal harvest in the Gulf of Maine Atlantic cod fishery under a variable climate versus a static climate. The optimal harvest path depends on the relationship between fishery growth and the interest rate, with higher interest rates dictating greater harvests now at the cost of long-term stock sustainability. Given the time horizon of a single generation of fishermen under assumptions of a static climate, the model finds that the economically optimal management strategy is to harvest the entire stock in the short term and allow the fishery to collapse. However, if the biological growth of the fishery is assumed to vary with climate conditions, such as the North Atlantic Oscillation, there will always be pulses of high growth in the stock. During some of these high-growth years, the growth of the stock and its economic yield can exceed the growth rate of the economy even under high interest rates. This implies that it is not economically optimal to exhaust the New England cod fishery if NAO is included in the biological growth function. This finding may have theoretical implications for the management of other renewable yet exhaustible resources whose growth rates are subject to climate variability.

Effect of harvest date and stalk section on selected strength ...

African Journals Online (AJOL)

Background: The time required to harvest plant crops is important to the plant properties. It is affected by design of the harvest equipment and the desire for high-quality products with low energy usage. Materials and Methods: Strength characteristics of Origanum onites L., an important medicinal aromatic plant, harvested on ...

Recent Rates of Forest Harvest and Conversion in North America

Science.gov (United States)

Masek, Jeffrey G.; Cohen, Warren B.; Leckie, Donald; Wulder, Michael A.; Vargas, Rodrigo; de Jong, Ben; Healey, Sean; Law, Beverly; Birdsey, Richard; Houghton, R. A.;

Sustainable Performance in Energy Harvesting - Wireless Sensor Networks

DEFF Research Database (Denmark)

Fafoutis, Xenofon; Di Mauro, Alessio; Dragoni, Nicola

2013-01-01

In this practical demo we illustrate the concept of "sustainable performance" in Energy-Harvesting Wireless Sensor Networks (EH-WSNs). In particular, for different classes of applications and under several energy harvesting scenarios, we show how it is possible to have sustainable performance when...

Rainwater harvesting in arid and semi-arid zones

NARCIS (Netherlands)

Boers, T.M.

1994-01-01

In arid and semi-arid regions, the scarcity of water can be alleviated by rainwater harvesting, which is defined as a method of inducing, collecting, storing, and conserving local surface runoff for agriculture. Rainwater harvesting can be applied with different

Economic analysis of water harvesting technologies in Ethiopia

NARCIS (Netherlands)

Wakeyo, M.B.

2012-01-01

Rainfall shortage and variability constrain crop production of smallholder farmers in Ethiopia and climate change may even aggravate this problem. An attractive method to mitigate this is water harvesting. This thesis examines the economic aspects of water harvesting by exploring optimal water

Twistor description of spinning particles in AdS

Science.gov (United States)

Arvanitakis, Alex S.; Barns-Graham, Alec E.; Townsend, Paul K.

2018-01-01

The two-twistor formulation of particle mechanics in D-dimensional anti-de Sitter space for D = 4 , 5 , 7, which linearises invariance under the AdS isometry group Sp(4; K ) for K=R,C,H, is generalized to the massless N -extended "spinning particle". The twistor variables are gauge invariant with respect to the initial N local worldline supersymmetries; this simplifies aspects of the quantum theory such as implications of global gauge anomalies. We also give details of the two-supertwistor form of the superparticle, in particular the massive superparticle on AdS5.

Holography in Lovelock Chern-Simons AdS gravity

Science.gov (United States)

Cvetković, Branislav; Miskovic, Olivera; Simić, Dejan

2017-08-01

We analyze holographic field theory dual to Lovelock Chern-Simons anti-de Sitter (AdS) gravity in higher dimensions using first order formalism. We first find asymptotic symmetries in the AdS sector showing that they consist of local translations, local Lorentz rotations, dilatations and non-Abelian gauge transformations. Then, we compute 1-point functions of energy-momentum and spin currents in a dual conformal field theory and write Ward identities. We find that the holographic theory possesses Weyl anomaly and also breaks non-Abelian gauge symmetry at the quantum level.

Chronic Wasting Disease: Transmission Mechanisms and the Possibility of Harvest Management

Science.gov (United States)

Potapov, Alex; Merrill, Evelyn; Pybus, Margo; Lewis, Mark A.

2016-01-01

We develop a model of CWD management by nonselective deer harvest, currently the most feasible approach available for managing CWD in wild populations. We use the model to explore the effects of 6 common harvest strategies on disease prevalence and to identify potential optimal harvest policies for reducing disease prevalence without population collapse. The model includes 4 deer categories (juveniles, adult females, younger adult males, older adult males) that may be harvested at different rates, a food-based carrying capacity, which influences juvenile survival but not adult reproduction or survival, and seasonal force of infection terms for each deer category under differing frequency-dependent transmission dynamics resulting from environmental and direct contact mechanisms. Numerical experiments show that the interval of transmission coefficients β where the disease can be controlled is generally narrow and efficiency of a harvest policy to reduce disease prevalence depends crucially on the details of the disease transmission mechanism, in particular on the intensity of disease transmission to juveniles and the potential differences in the behavior of older and younger males that influence contact rates. Optimal harvest policy to minimize disease prevalence for each of the assumed transmission mechanisms is shown to depend on harvest intensity. Across mechanisms, a harvest that focuses on antlered deer, without distinguishing between age classes reduces disease prevalence most consistently, whereas distinguishing between young and older antlered deer produces higher uncertainty in the harvest effects on disease prevalence. Our results show that, despite uncertainties, a modelling approach can determine classes of harvest strategy that are most likely to be effective in combatting CWD. PMID:26963921

32 CFR 2400.28 - Dissemination of classified information.

Science.gov (United States)

2010-07-01

... 32 National Defense 6 2010-07-01 2010-07-01 false Dissemination of classified information. 2400.28... SECURITY PROGRAM Safeguarding § 2400.28 Dissemination of classified information. Heads of OSTP offices... originating official may prescribe specific restrictions on dissemination of classified information when...

Wireless Underwater Monitoring Systems Based on Energy Harvestings

Directory of Open Access Journals (Sweden)

Sea-Hee HWANGBO

2013-01-01

Full Text Available One of the important research fields for aquatic exploitation and conservation is underwater wireless sensor network. Since limited energy source for underwater nodes and devices is a main open problem, in this paper, we propose wireless underwater monitoring systems powered by energy harvester which resolves the energy constraint. The target system generates renewable energy from energy harvester and shares the energy with underwater sensor nodes. For the realization of the system, key components to be investigated are discriminated as follows: acoustic modem, actuator, smart battery charge controller, energy harvester and wireless power transfer module. By developing acoustic modem, actuator and smart battery charge controller and utilizing off-the-shelf energy harvester and wireless power transfer module, we design and implement a prototype of the system. Also, we verify the feasibility of concept of target system by conducting indoor and outdoor experiments.

Efeito do tempo de experiência de operadores de Harvester no rendimento operacional Effect of time experience of Harvester operators in operating yield

Directory of Open Access Journals (Sweden)

Elaine Cristina Leonello

2012-12-01

Full Text Available A mecanização da colheita de madeira permite maior controle dos custos e pode proporcionar reduções em prazos relativamente curtos. Além disso, tem um lugar de destaque na humanização do trabalho florestal e no aumento do rendimento operacional. O presente trabalho teve por objetivo avaliar o desempenho de operadores de harvester em função do tempo de experiência na atividade. Foram avaliados oito operadores do sexo masculino, com idade entre 23 e 46 anos. O estudo consistiu na análise do volume de madeira colhida pelo harvester. O tempo de experiência afeta significativamente o rendimento operacional dos operadores de harvester. Tal rendimento aumenta expressivamente nos primeiros 18 meses de experiência, mantendo-se em ascensão nos próximos 26 meses. Após os 44 meses de experiência, o rendimento dos operadores tende a reduzir, revelando as possíveis acomodações do cotidiano. Tais resultados permitem concluir que por volta dos 50 meses de experiência na atividade de operação de harvester, se faz necessária a adoção de medidas de reciclagem, motivação, entre outras, a fim de proporcionar aos operadores melhores condições de trabalho que os possibilitem continuar exercendo a atividade de forma eficiente e rentável à empresa.The mechanization of timber harvesting allows greater control of costs and can provide reductions in relatively short intervals. Moreover, it has a place in the humanization of the working forest and the increase in performance. This work provides comparisons of operating performance of different operator harvester according to the time of experience in the activity. The operators evaluated were eight males, aged between 23 and 46 years old. The study consisted of analysis of the volume of timber harvested by the harvester. The experience significantly affects the performance of harvesters operators. The performance increases significantly in the first 18 months of experience, and it remained on

A broadband electromagnetic energy harvester with a coupled bistable structure

International Nuclear Information System (INIS)

Zhu, D; Beeby, S P

2013-01-01

This paper investigates a broadband electromagnetic energy harvester with a coupled bistable structure. Both analytical model and experimental results showed that the coupled bistable structure requires lower excitation force to trigger bistable operation than conventional bistable structures. A compact electromagnetic vibration energy harvester with a coupled bistable structure was implemented and tested. It was excited under white noise vibrations. Experimental results showed that the coupled bistable energy harvester can achieve bistable operation with lower excitation amplitude and generate more output power than both conventional bistable and linear energy harvesters under white noise excitation

Optimal Spatial Harvesting Strategy and Symmetry-Breaking

International Nuclear Information System (INIS)

Kurata, Kazuhiro; Shi Junping

2008-01-01

A reaction-diffusion model with logistic growth and constant effort harvesting is considered. By minimizing an intrinsic biological energy function, we obtain an optimal spatial harvesting strategy which will benefit the population the most. The symmetry properties of the optimal strategy are also discussed, and related symmetry preserving and symmetry breaking phenomena are shown with several typical examples of habitats

Sharp Dissection versus Electrocautery for Radial Artery Harvesting

Science.gov (United States)

Marzban, Mehrab; Arya, Reza; Mandegar, Mohammad Hossein; Karimi, Abbas Ali; Abbasi, Kiomars; Movahed, Namvar; Abbasi, Seyed Hesameddin

2006-01-01

Radial arteries have been increasingly used during the last decade as conduits for coronary artery revascularization. Although various harvesting techniques have been described, there has been little comparative study of arterial damage and patency. A radial artery graft was used in 44 consecutive patients, who were randomly divided into 2 groups. In the 1st group, the radial artery was harvested by sharp dissection and in the 2nd, by electrocautery. These groups were compared with regard to radial artery free flow, harvest time, number of clips used, complications, and endothelial damage. Radial artery free flow before and after intraluminal administration of papaverine was significantly greater in the electrocautery group (84.3 ± 50.7 mL/min and 109.7 ± 68.5 mL/min) than in the sharp-dissection group (52.9 ± 18.3 mL/min and 69.6 ± 28.2 mL/ min) (P =0.003). Harvesting time by electrocautery was significantly shorter (25.4 ± 4.3 min vs 34.4 ± 5.9 min) (P =0.0001). Electrocautery consumed an average of 9.76 clips, versus 22.45 clips consumed by sharp dissection. The 2 groups were not different regarding postoperative complications, except for 3 cases of temporary paresthesia of the thumb in the electrocautery group; histopathologic examination found no endothelial damage. We conclude that radial artery harvesting by electrocautery is faster and more economical than harvesting by sharp dissection and is associated with better intraoperative flow and good preservation of endothelial integrity. PMID:16572861

Exploring AdS waves via nonminimal coupling

International Nuclear Information System (INIS)

Ayon-Beato, Eloy; Hassaiene, Mokhtar

2006-01-01

We consider nonminimally coupled scalar fields to explore the Siklos spacetimes in three dimensions. Their interpretation as exact gravitational waves propagating on AdS space restrict the source to behave as a pure radiation field. We show that the related pure radiation constraints single out a unique self-interaction potential depending on one coupling constant. For a vanishing coupling constant, this potential reduces to a mass term with a mass fixed in terms of the nonminimal-coupling parameter. This mass dependence allows the existence of several free cases including massless and tachyonic sources. There even exists a particular value of the nonminimal-coupling parameter for which the corresponding mass exactly compensates the contribution generated by the negative scalar curvature, producing a genuinely massless field in this curved background. The self-interacting case is studied in detail for the conformal coupling. The resulting gravitational wave is formed by the superposition of the free and the self-interaction contributions, except for a critical value of the coupling constant where a nonperturbative effect relating the strong and weak regimes of the source appears. We establish a correspondence between the scalar source supporting an AdS wave and a pp wave by showing that their respective pure radiation constraints are conformally related, while their involved backgrounds are not. Finally, we consider the AdS waves for topologically massive gravity and its limit to conformal gravity

Comparison of wood harvesting methods in the Republic of Karelia

Energy Technology Data Exchange (ETDEWEB)

Syunev, V.; Sokolov, A.; Konovalov, A.; Katarov, V.; Seliverstov, A.; Gerasimov, Y.; Karvinen, S. email: sari.karvinen@metla.fi; Vaelkky, E.

2009-07-01

Impacts of cut-to-length, tree-length and full-tree harvesting technology on direct operating costs, productivity, forest environment, ergonomics and work safety, as well as on wood quality were studied in 2007 and 2008 in 15 harvesting companies in the Republic of Karelia, Russia. Productivity varied within a relatively wide range from 20 to 150 m3 per shift. Fully mechanized full-tree harvesting provided the maximum productivity. The professional skills and experience of harvesting machine operators had a significant impact on the productivity. Direct operating costs had insignificant differences - the average costs were 250 RUB/m3. In the traditional Russian tree-length and full-tree harvesting, real harvesting costs were higher than in the cut-to-length technology, due to additional work at the central processing yard. All the technologies demonstrated an almost identical impact on the lower layers of soil, when applied on sandy or sandy loam soils. Porosity was reduced by 9-10%. On clay loams, the tree-length technology resulted in significant topsoil compaction but, at the same time, formed almost no track. The studied full-tree technology was only acceptable in harvesting sites where no undergrowth preservation was required. Partially mechanized cut-to-length technology ensured high undergrowth preservation. In thinnings the tree-length and the fully mechanized cut-to-length technology resulted in less damage to the remaining trees compared to the other technologies. The best working conditions in terms of ergonomics and occupational safety were provided by the chain consisting of a harvester and a forwarder. It was closely followed by the chain 'feller buncher and wheeled skidder'. Traditional tree-length harvesting with cable skidders demonstrated the worst results in terms of ergonomics, work severity and occupational safety. Fully mechanized cut-to-length technology provided with the best results in the preservation of wood quality The quality

Nonlinear analysis and characteristics of inductive galloping energy harvesters

Science.gov (United States)

Dai, H. L.; Yang, Y. W.; Abdelkefi, A.; Wang, L.

2018-06-01

This paper presents an investigation on analysis and characteristics of aerodynamic electromagnetic energy harvesters. The source of aeroelastic oscillations results from galloping of a prismatic structure. A nonlinear distributed-parameter model is developed representing the dynamics of the transverse degree of freedom and the electric current induced in the coil. Firstly, we perform a linear analysis to study the impacts of the external electrical resistance, magnet placement, electromagnetic coupling coefficient, and internal resistance in the coil on the cut-in speed of instability of the coupled electroaeroelastic system. It is demonstrated that these parameters have significant impacts on cut-in speed of instability of the harvester system. Subsequently, a nonlinear analysis is implemented to explore the influences of these parameters on the output property of the energy harvester. The results show that there exists an optimal external electrical resistance which maximizes the output power of the harvester, and this optimal value varies with the magnet's placement, wind speed, electromagnetic coupling coefficient and internal resistance of the coil. It is also demonstrated that an increase in the distance between the clamped end and the magnet, an increase in the electromagnetic coupling coefficient, and/or a decrease in the internal resistance of the coil are accompanied by an increase in the level of the harvested power and a decrease in the tip displacement of the bluff body which is associated with a resistive-shunt damping effect in the harvester. The implemented studies give a constructive guidance to design and enhance the output performance of aerodynamic electromagnetic energy harvesters.

Classification of MR brain images by combination of multi-CNNs for AD diagnosis

Science.gov (United States)

Cheng, Danni; Liu, Manhua; Fu, Jianliang; Wang, Yaping

2017-07-01

Alzheimer's disease (AD) is an irreversible neurodegenerative disorder with progressive impairment of memory and cognitive functions. Its early diagnosis is crucial for development of future treatment. Magnetic resonance images (MRI) play important role to help understand the brain anatomical changes related to AD. Conventional methods extract the hand-crafted features such as gray matter volumes and cortical thickness and train a classifier to distinguish AD from other groups. Different from these methods, this paper proposes to construct multiple deep 3D convolutional neural networks (3D-CNNs) to learn the various features from local brain images which are combined to make the final classification for AD diagnosis. First, a number of local image patches are extracted from the whole brain image and a 3D-CNN is built upon each local patch to transform the local image into more compact high-level features. Then, the upper convolution and fully connected layers are fine-tuned to combine the multiple 3D-CNNs for image classification. The proposed method can automatically learn the generic features from imaging data for classification. Our method is evaluated using T1-weighted structural MR brain images on 428 subjects including 199 AD patients and 229 normal controls (NC) from Alzheimer's Disease Neuroimaging Initiative (ADNI) database. Experimental results show that the proposed method achieves an accuracy of 87.15% and an AUC (area under the ROC curve) of 92.26% for AD classification, demonstrating the promising classification performances.

Data retrieval time for energy harvesting wireless sensors

NARCIS (Netherlands)

Mitici, M.A.; Goseling, Jasper; de Graaf, Maurits; Boucherie, Richardus J.

2015-01-01

We consider the problem of retrieving a reliable estimate of an attribute monitored by a wireless sensor network, where the sensors harvest energy from the environment independently, at random. Each sensor stores the harvested energy in batteries of limited capacity. Moreover, provided they have

Harvester development for new high yielding SRC crops and markets

Energy Technology Data Exchange (ETDEWEB)

Paulson, Mark

2005-07-01

This report describes the development of harvesting equipment for short rotation cultivation (SRC) crops produced in the UK that can produce fuel to a required specification in a single pass at a cost that is profitable for the grower while minimising the cost of the product. Details are given of the manufacture and installation of new components for large crop harvesting, and production of fuel suitable for co-firing in a coal combustion system using pulverised fuel and fuel suitable for gasification. The development of the drive chain to cope with the higher yielding crops, field tests on SRC crops, and determination of the most economic harvesting system are discussed along with the remanufacture of the chipping drum, and production of market chip samples. Harvesting guidance and an economic analysis of harvesting systems are presented.

Harvester development for new high yielding SRC crops and markets

International Nuclear Information System (INIS)

Paulson, Mark

2005-01-01

This report describes the development of harvesting equipment for short rotation cultivation (SRC) crops produced in the UK that can produce fuel to a required specification in a single pass at a cost that is profitable for the grower while minimising the cost of the product. Details are given of the manufacture and installation of new components for large crop harvesting, and production of fuel suitable for co-firing in a coal combustion system using pulverised fuel and fuel suitable for gasification. The development of the drive chain to cope with the higher yielding crops, field tests on SRC crops, and determination of the most economic harvesting system are discussed along with the remanufacture of the chipping drum, and production of market chip samples. Harvesting guidance and an economic analysis of harvesting systems are presented

Integrating support vector machines and random forests to classify crops in time series of Worldview-2 images

Science.gov (United States)

Zafari, A.; Zurita-Milla, R.; Izquierdo-Verdiguier, E.

2017-10-01

Crop maps are essential inputs for the agricultural planning done at various governmental and agribusinesses agencies. Remote sensing offers timely and costs efficient technologies to identify and map crop types over large areas. Among the plethora of classification methods, Support Vector Machine (SVM) and Random Forest (RF) are widely used because of their proven performance. In this work, we study the synergic use of both methods by introducing a random forest kernel (RFK) in an SVM classifier. A time series of multispectral WorldView-2 images acquired over Mali (West Africa) in 2014 was used to develop our case study. Ground truth containing five common crop classes (cotton, maize, millet, peanut, and sorghum) were collected at 45 farms and used to train and test the classifiers. An SVM with the standard Radial Basis Function (RBF) kernel, a RF, and an SVM-RFK were trained and tested over 10 random training and test subsets generated from the ground data. Results show that the newly proposed SVM-RFK classifier can compete with both RF and SVM-RBF. The overall accuracies based on the spectral bands only are of 83, 82 and 83% respectively. Adding vegetation indices to the analysis result in the classification accuracy of 82, 81 and 84% for SVM-RFK, RF, and SVM-RBF respectively. Overall, it can be observed that the newly tested RFK can compete with SVM-RBF and RF classifiers in terms of classification accuracy.

An innovative tri-directional broadband piezoelectric energy harvester

Energy Technology Data Exchange (ETDEWEB)

Su, Wei-Jiun, E-mail: weijiun@mie.utoronto.ca; Zu, Jean [Department of Mechanical and Industrial Engineering, University of Toronto, Toronto, Ontario M5S 3G8 (Canada)

2013-11-11

This paper presents a tri-directional piezoelectric energy harvester that is able to harvest vibration energy over a wide bandwidth from three orthogonal directions. The harvester consists of a main beam, an auxiliary beam, and a spring-mass system, with magnets integrated to introduce nonlinear force and couple the three sub-systems. Theoretical analysis and experiments were performed at constant acceleration under frequency sweeps to acquire frequency responses. The experimental results show that the voltage can achieve more than 2 V over more than 5 Hz of bandwidth with 1 MΩ load in the three orthogonal directions.

Axial Permanent Magnet Generator for Wearable Energy Harvesting

DEFF Research Database (Denmark)

Högberg, Stig; Sødahl, Jakob Wagner; Mijatovic, Nenad

2016-01-01

An increasing demand for battery-free electronics is evident by the rapid increase of wearable devices, and the design of wearable energy harvesters follows accordingly. An axial permanent magnet generator was designed to harvest energy from human body motion and supplying it to a wearable......W, respectively) with an iron yoke is subject to losses that exceed the realistic input power, and was therefore deemed infeasible. A generator without the iron yoke was concluded to perform well as a wearable energy harvester. An experimental investigation of a prototype revealed an output power of almost 1 m...

Adding Fludarabine to Cyclophophamide-dexamethason induction therapy impair stem cell harvest in MM

DEFF Research Database (Denmark)

Johnsen, Hans Erik; Meldgaard Knudsen, Lene; Mylin, Anne Kærsgaard

BACKGROUND AND OBJECTIVES Recent data have indicated that the myeloma cell hierarchy includes resistant Recent data have indicated that the myeloma cell hierarchy includes resistant circulating clonal memory B cells, which differ considerably from the classical end stage plasma cells infiltrating......, placebo controlled, single blinded, phase II study evaluating This was a randomized, placebo controlled, single blinded, phase II study evaluating toxicity and safety of Fludarabine added to Cyclophosphamide and Dexamethasone (CyDex) as induction therapy in younger patients with untreated and treatment...

Engineered Nanomaterials for Energy Harvesting and Storage Applications

Science.gov (United States)

Gullapalli, Hemtej

Energy harvesting and storage are independent mechanisms, each having their own significance in the energy cycle. Energy is generally harvested from temperature variations, mechanical vibrations and other phenomena which are inherently sporadic in nature, harvested energy stands a better chance of efficient utilization if it can be stored and used later, depending on the demand. In essence a comprehensive device that can harness power from surrounding environment and provide a steady and reliable source of energy would be ideal. Towards realizing such a system, for the harvesting component, a piezoelectric nano-composite material consisting of ZnO nanostructures embedded into the matrix of 'Paper' has been developed. Providing a flexible backbone to a brittle material makes it a robust architecture. Energy harvesting by scavenging both mechanical and thermal fluctuations using this flexible nano-composite is discussed in this thesis. On the energy storage front, Graphene based materials developed with a focus towards realizing ultra-thin lithium ion batteries and supercapacitors are introduced. Efforts for enhancing the energy storage performance of such graphitic carbon are detailed. Increasing the rate capability by direct CVD synthesis of graphene on current collectors, enhancing its electrochemical capacity through doping and engineering 3D metallic structures to increase the areal energy density have been studied.

Energy Harvesting for Structural Health Monitoring Sensor Networks

Energy Technology Data Exchange (ETDEWEB)

Park, G.; Farrar, C. R.; Todd, M. D.; Hodgkiss, T.; Rosing, T.

2007-02-26

This report has been developed based on information exchanges at a 2.5-day workshop on energy harvesting for embedded structural health monitoring (SHM) sensing systems that was held June 28-30, 2005, at Los Alamos National Laboratory. The workshop was hosted by the LANL/UCSD Engineering Institute (EI). This Institute is an education- and research-focused collaboration between Los Alamos National Laboratory (LANL) and the University of California, San Diego (UCSD), Jacobs School of Engineering. A Statistical Pattern Recognition paradigm for SHM is first presented and the concept of energy harvesting for embedded sensing systems is addressed with respect to the data acquisition portion of this paradigm. Next, various existing and emerging sensing modalities used for SHM and their respective power requirements are summarized, followed by a discussion of SHM sensor network paradigms, power requirements for these networks and power optimization strategies. Various approaches to energy harvesting and energy storage are discussed and limitations associated with the current technology are addressed. This discussion also addresses current energy harvesting applications and system integration issues. The report concludes by defining some future research directions and possible technology demonstrations that are aimed at transitioning the concept of energy harvesting for embedded SHM sensing systems from laboratory research to field-deployed engineering prototypes.

Asymptotically AdS spacetimes with a timelike Kasner singularity