Influence of agar concentration on in vitro multiplication of Cymbopogon citratus (D. C. Stapf

Directory of Open Access Journals (Sweden)

Ricardo J. Licea Moreno

2001-04-01

Full Text Available Here are presented the results on in vitro multiplication of lemon grass (Cymbopogon citratus (D. C. Stapf.; it is a very important medicinal plant because its analgesic, antinflamatory and hipotensor properties, among others, useful to elaborate several medicaments with a high popular acceptation. The main aim of this research was to set up the influence of agar concentration in culture medium during in vitro establishment on multiplication of lemon grass. Were used three treatments: (1 liquid medium with filter paper bridges, (2 3 g.l-1 of agar (BIOCEN and (3 6 g.l-1 of agar (BIOCEN. The explants were inoculated on a culture media containing Murashige and Skoog salts (1962, Heinz and Mee vitamins (1969, myoinositol 100 mg.l-1, 6-BAP 0.2 mg.l-1 and sucrose 20 g.l-1. Meristematic tips were inoculated on the treatments described above under sun light conditions, once desinfected. The explants Influence of agar concentration on in vitro multiplication of Cymbopogon citratus (D. C. Stapf. were maintained 21 days in this culture media and later it is were subcultured 5 times each 21 days, on the same multiplication culture media containing Murashige and Skoog salts (1962, tiamine 1 mg.l-1, myoinositol 100 mg.l-1, 6-BAP 0.3 mg.l-1 and sucrose 30 g.l-1. The pH was 5.7 for all culture media. The results showed the relevance of agar concentration during in vitro establishment on multiplication of lemon grass. Differences among treatments until the 2nd subculture was observed. 3.43 new axillary shoots from each explant cultured on a culture media supplemented with 3 g.l-1 of agar was reached. Key words: lemon grass, medicinal plants, micropropagation, tissue culture

Data showing chemical compositions of the essential oils of the leaves of Cymbopogon citratus obtained by varying pH of the extraction medium

Directory of Open Access Journals (Sweden)

E.O. Ajayi

2016-09-01

Full Text Available This article describes the various chemical components as obtained from the oils in the leaves of Cymbopogon citratus using hydrodistillation and solvent-free microwave extraction methods. Furthermore, extractions of the oils were also carried out with a slight in pH variation and compared, “GC–MS evaluation of C. citratus (DC Stapf oil obtained using modified hydrodistillation and microwave extraction methods” (Ajayi et al., 2016 [1]. The current article contains one table exhibiting a list of compounds in the four different methods of extraction. Comparative studies amongst the various methods of extraction are highlighted in the table. Keywords: Essential oil, Cymbopogon citratus, pH Extraction medium

Control of anthracnose caused by Colletotrichum species in guava, mango and papaya using synergistic combinations of chitosan and Cymbopogon citratus (D.C. ex Nees) Stapf. essential oil.

Science.gov (United States)

Lima Oliveira, Priscila Dinah; de Oliveira, Kataryne Árabe Rimá; Vieira, Willie Anderson Dos Santos; Câmara, Marcos Paz Saraiva; de Souza, Evandro Leite

2018-02-02

This study assessed the efficacy of chitosan (Chi) and Cymbopogon citratus (D.C. ex Nees) Stapf. essential oil (CCEO) combinations to control the mycelial growth of five pathogenic Colletotrichum species (C. asianum, C. siamense, C. fructicola, C. tropicale and C. karstii) in vitro, as well as the anthracnose development in guava (Psidium guajava L.) cv. Paluma, mango (Mangifera indica L.) cv. Tommy Atkins and papaya (Carica papaya L.) cv. Papaya artificially inoculated with these species. Combinations of Chi (2.5, 5 or 7.5mg/mL) and CCEO (0.15, 0.3, 0.6 or 1.25μL/mL) inhibited the mycelial growth of all tested fungal species in vitro. Examined Chi-CCEO combinations showed additive or synergistic interactions to inhibit the target Colletotrichum species based on the Abbott index. Coatings formed by synergistic Chi (5mg/mL) and CCEO (0.15, 0.3 or 0.6μL/mL) combinations decreased anthracnose lesion development in guava, mango and papaya inoculated with any of the tested Colleotrichum species during storage. Overall, anthracnose lesion development inhibition in fruit coated with synergistic Chi-CCEO combinations was higher than that observed in fruit treated with synthetic fungicides. These results show that the application of coatings formed by Chi-CCEO synergistic combinations could be effective to control postharvest anthracnose development in fruit. Copyright © 2017 Elsevier B.V. All rights reserved.

Primeira ocorrência de ferrugem em capim-limão causada por Puccinia cymbopogonis no Brasil First report of the lemongrass rust fungi caused by Puccinia cymbopogonis in Brazil

Directory of Open Access Journals (Sweden)

João Batista Vida

2006-03-01

Full Text Available È registrada a primeira ocorrência de ferrugem em capim-limão (Cymbopogon citratus (DC. Stapf, causada por Puccinia cymbopogonis Mass., no Brasil, Estado do Paraná.It is reported the first occurrence of the lemongrass (Cymbopogon citratus (DC. Stapf rust fungi caused by Puccinia cymbopogonis Mass. in Brazil, State of Paraná.

Efecto anti-Trypanosoma cruzi del aceite esencial de Cymbopogon citratus (DC Stapf (hierba luisa en ratones Balb/c

Directory of Open Access Journals (Sweden)

Juan Rojas

2012-01-01

Full Text Available Objetivo: Determinar la actividad anti-Trypanosoma cruzi in vivo del aceite esencial de Cymbopogon citratus en ratones Balb/c. Diseño: Estudio experimental, prospectivo. Institución: Instituto de Investigaciones Clínicas e Instituto de Medicina Tropical de la Facultad de Medicina de la Universidad Nacional Mayor de San Marcos, Lima, Perú. Material biológico: Aceite esencial de Cymbopogon citratus; ratones albinos Balb/c. Intervenciones: Los animales fueron asignados aleatoriamente a seis grupos de 15 ratones cada uno: infectados y no tratados (G1, infectados y tratados con benznidazol 100 mg/kg (G2, infectados y tratados con aceite esencial de Cymbopogon citratus 100 mg/kg y 250 mg/kg (G3 y G4, respectivamente, no infectados y no tratados (G5, y no infectados y tratados con 250 mg de Cymbopogon citratus (G6. La infección con T. cruzi se realizó con 10(4 trypomastigotes sanguíneos y el tratamiento empezó en el 8º día post infección (dpi hasta el 28° dpi. La parasitemia se determinó con microscopia óptica cada dos días en 5 µL de sangre de la cola. En el 14°, 21° y 28° dpi, cinco animales de cada grupo fueron sacrificados y se removió el corazón para estudio histopatológico. Principales medidas de resultados: Parasitemia, número de nidos de amastigotes e infiltrados inflamatorios. Resultados: El aceite esencial de Cymbopogon citratus 250 mg/kg/día produjo una reducción significativa en el pico de parasitemia desde 113,92 ± 25,66 hasta 74,60 ± 12,37 tripomastigotes/mL (p < 0,05. Con 100 mg/kg/día se produjo una reducción hasta 77,40 ± 14,93 tripomastigotes/ mL (p < 0,05. También redujo el número de amastigotes y de infiltrados inflamatorios en el corazón. Conclusiones: El aceite esencial de Cymbopogon citratus tuvo efecto anti-Trypanosoma cruzi en ratones Balb/c en lo referente a la disminución de la parasitemia, el número de nidos de amastigotes y los resultados inflamatorios.

Cellular Suspensions Establishment and Multiplication of Cymbopogon citratus (D.C Staff

Directory of Open Access Journals (Sweden)

Elisa Quiala

2002-07-01

Full Text Available Cellular suspensions settled down starting from callus of Cymbopogon citratus (D.C Stapf cultivated in semisolid medium, according to the methodology described for Freire (1998, for the cultivation of the cane of sugar and later on modified by Licea and Gómez (2000 for the cultivated callus of Cane Santa, with the objective of analyzing the effect of the cellular density on the cellular growth, being studied the behavior of the fresh mass, dry mass and the pH in three inocule densities (20, 40 and 60 gMF.l-1. The development of roots was evaluated in the cellular aggregated and it was also analyzed directly the influence of the explants on the callus formation cultivated directly in liquid medium, starting from cultivated plants in vitro. The biggest increment of fresh mass was obtained when 20 gMF.l-1 was used, the values of mass dry off they behaved in a similar way, being obtained the biggest rate of growth in this same treatment. The pH in the three densities of studied inocule, diminished during the first eight days and stayed stable starting from this moment. The alone presence of roots was appreciated only in the cellular aggregated cultivated without coconut water. The formation of callus directly in liquid medium took place in the region near to the meristematic area. Key words: coconut water, biomass production, lemon grass, root formation

Free radical scavengers and antioxidants from Lemongrass (Cymbopogon citratus (DC.) Stapf.).

Science.gov (United States)

Cheel, José; Theoduloz, Cristina; Rodríguez, Jaime; Schmeda-Hirschmann, Guillermo

2005-04-06

Methanol, MeOH/water extracts, infusion, and decoction of Cymbopogon citratus were assessed for free radical scavenging effects measured by the bleaching of the 1,1-diphenyl-2-picryl-hydrazyl (DPPH) radical, scavenging of the superoxide anion, and inhibition of the enzyme xanthine oxidase (XO) and lipid peroxidation in human erythrocytes. The extracts presented effect in the DPPH and superoxide anion assay, with values ranging between 40 and 68% and 15-32% at 33 and 50 microg/mL, respectively, inhibited lipid peroxidation in erythrocytes by 19-71% at 500 microg/mL and were inactive toward the XO at 50 microg/mL. Isoorientin, isoscoparin, swertiajaponin, isoorientin 2' '-O-rhamnoside, orientin, chlorogenic acid, and caffeic acid were isolated and identified by spectroscopic methods. Isoorientin and orientin presented similar activities toward the DPPH (IC(50): 9-10 microM) and inhibited lipid peroxidation by 70% at 100 microg/mL. Caffeic and chlorogenic acid were active superoxide anion scavengers with IC(50) values of 68.8 and 54.2 microM, respectively, and a strong effect toward DPPH. Caffeic acid inhibited lipid peroxidation by 85% at 100 microg/mL.

Antifungal Activity of the Essential Oil of Cymbopogon citratus (DC Stapf. An in vitro study.

Directory of Open Access Journals (Sweden)

Naiana Braga da Silva

2017-12-01

Full Text Available Aim. To evaluate the antifungal potential of the essential oil of Cymbopogon citratus by determining the Minimum Inhibitory Concentration (MIC and the Minimum Fungicidal Concentration (MFC for Candida albicans (ATCC 90029, Candida albicans (CBS 562, Candida tropicalis (ATCC 705 and Candida tropicalis strains (CBS 94, as well as to analyze the possible mechanism of action of the oil through the addition of sorbitol to the culture medium. Methods. For the MIC determination, inocula were previously adjusted through spectrophotometry and 100μL were added to the wells of plates already containing the culture medium and 100μL of the serial dilutions of the oil, incubating them in aerobiosis for 24 hours, with subsequent staining by 1% TCT. For the MFC, 50μL of the supernatant from the MIC assay wells were dripped onto Petri dishes and incubated in aerobiosis for 24 hours. Tests were performed in triplicate and data analysed by descriptive statistics. Results. It was determined that the MIC for C. albicans was 125 μg/mL while MIC for C. tropicalis was 250 μg/mL, with the essential oil presenting fungicidal effect for both analyzed yeasts. Conclusion. The essential oil of Cymbopogon citratus does not act at the cellular wall level and demonstrated an antimicrobial effect on Candida albicans and Candida tropicalis, therefore acting as a fungicide.

Broiler Pre-Slaughter Water Diet with Grass Lemongrass (Cymbopogon Citratus Stapf

Directory of Open Access Journals (Sweden)

RG Garcia

Full Text Available ABSTRACT The pre-slaughter management is one of the predisposing factors to the reduction in the quality of the carcass and broiler meat, mainly for being a stressful condition. This study evaluates the inclusion of lemongrass (Cymbopogon citratus Stapf in the water used in the diet of pre-slaughter broilers for the first time. The carcass and meat quality parameters were evaluated. The experiment was carried out in the poultry production of an experimental sector of the Federal University of Grande Dourados - UFGD. A total of 2,594 broilers were distributed in an entirely randomized design in a factorial arrangement of 3x2x2, with three different lemongrass concentrations in the form of infusion (0. 1 and 5 g/L, two sexes and two genetic strains (Ross 308® and Cobb 500®, and with four replications. After 42 days, 144 broilers were slaughtered, and the quality parameters of carcass and meat were evaluated. A higher incidence of scratches and higher water retention capacity were found in Ross 308® male (p<0.05. Less exudate of breast fillets loss was observed in broiler Ross 308® males 72 h post-mortem (p<0.05. There was an interaction between sex and lemongrass levels in the drinking water of the broilers in the sensory analysis of meat (p<0.05, more preferably of chewiness and juiciness for males undergoing free diet for juiciness and lemongrass in the female diet with 5g/L. The use of lemongrass infusions in pre-slaughter did not bring considerable benefits to the quality of carcass and meat of broiler.

Evaluation of Antibacterial Activity of Aminoglycosides and Modulating the Essential Oil of Cymbopogon citratus (DC. Stapf

Directory of Open Access Journals (Sweden)

Saulo R. TINTINO

2015-01-01

Vários trabalhos vêm demonstrando a importância do estudo de produtos naturais como fonte alternativa para novos antimicrobianos ou que venham potencializar os já existentes. Neste contexto este trabalho teve como objetivo investigar a atividade antibacteriana e as possíveis interações entre o óleo essencial de Cymbopogon citratus combinados a aminoglicosídeos frente a linhagens padrões e multirresistentes de S. aureus, E. coli e de P. aeruginosa provenientes de isolados clínicos. Um ensaio de microdiluição foi realizado para verificar a atividade antibacteriana e as possíveis interacções entre o produto natural e os antibióticos, utilizando uma concentração sub-inibitória. Através dos resultados foi constatado a interferência sinérgica dos aminoglicosídeos quando associados com o óleo essencial em uma concentração de CIM/8, com redução das CIMs em até quatro pontos frente às linhagens de S. aureus 358, E. coli 27 e P. aeruginosa-143. Mas nenhuma atividade modificadora foi observada frente a P. aeruginosa 78 e P. aeruginosa 91. Através dos resultados pode-se concluir que o óleo essencial de Cymbopogon citratus pode ser uma fonte alternativa de produtos naturais com atividade antibacteriana. Vários trabalhos vêm demonstrando a importância do estudo de produtos naturais como fonte alternativa para novos antimicrobianos ou que venham potencializar os já existentes. Neste contexto este trabalho teve como objetivo investigar a atividade antibacteriana e as possíveis interações entre o óleo essencial de Cymbopogon citratus combinados a aminoglicosídeos frente a linhagens padrões e multirresistentes de S. aureus, E. coli e de P. aeruginosa provenientes de isolados clínicos. Um ensaio de microdiluição foi realizado para verificar a atividade antibacteriana e as possíveis interacções entre o produto natural e os antibióticos, utilizando uma concentração sub-inibitória. Através  dos resultados foi constatado a

Gastroprotective effect of Cymbopogon citratus infusion on acute ethanol-induced gastric lesions in rats.

Science.gov (United States)

Sagradas, Joana; Costa, Gustavo; Figueirinha, Artur; Castel-Branco, Maria Margarida; Silvério Cabrita, António Manuel; Figueiredo, Isabel Vitória; Batista, Maria Teresa

2015-09-15

Treatment of gastric ulcers with medicinal plants is quite common in traditional medicine worldwide. Cymbopogon citratus (DC) Stapf. leaves infusion has been used in folk medicine of many tropical and subtropical regions to treat gastric disturbances. The aim of this study was to assess the potential gastroprotective activity of an essential oil-free infusion from C. citratus leaves in acute gastric lesions induced by ethanol in rat. The study was performed on adult male Wistar rats (234.0±22.7g) fasted for 24h but with free access to water. The extract was given orally before (prevention) or after (treatment) intragastric administration of absolute ethanol. Effects of dose (28 or 56mg/kg of body weight) and time of contact of the extract with gastric mucosa (1 or 2h) were also assessed. Animals were sacrificed, being the stomachs removed and the lesions were assessed by macroscopic observation and histopathology. C. citratus extract, given orally before or after ethanol, significantly (P<0.01) reduced gastric mucosal injury compared with control group (vehicle+ethanol). The effect does not appear to be dose-dependent. Results also suggested that the extract is more effective when the time of contact with gastric mucosa increases. The results of this assay confirm the gastroprotective activity of C. citratus extract on experimental gastric lesions induced by ethanol, contributing for the pharmacological validation of its traditional use. Copyright © 2015 Elsevier Ireland Ltd. All rights reserved.

Use of gamma radiation cobalt 60 for disinfestation of Lasioderma serricorne (Fabricius, 1972) (Coleoptera: Anobiidae) in Cymbopogon citratus stapf and Ocimun basillicum L. dehydrated

International Nuclear Information System (INIS)

Ramos, Amanda C.O.; Potenza, Marcos R.; Alves, Juliana N.; Justi Junior, Joao

2007-01-01

Stored products such as grains, flours, dry fruits and spices are normally infested by pests as beetles (Lasioderma serricorne), mites and moths, depreciating the product visually and promoting its deterioration. To improve the quality of spices, medicinal plants, seasoning and others foodstuffs there is a need for adequate methods of handling, correct identification of the species, adequate collection, pre and post-treatment procedures and adequate storage. The objective of this work was to determine the dose of gamma radiation for the disinfestations of medicinal and aromatic plants dehydrated infested by L. serricone. The plants used in this study were Cymbopogon citratus stapf (lemon grass) and Ocimun basillicum L. (basil) in this dehydrated form. The experiment was carried out in the Arthropods Laboratory of the Instituto Biologico/SP, during the months of January and May 2006, and the irradiations were carried out in the Instituto de Pesquisas Energeticas e Nucleares-IPEN/CNEN/SP, using an experimental Cobalt 60 irradiator, model Gammacell 220. Each treatment consisted of 5 parcels containing 10g of dehydrated products infested with 20 last instar larvae of L. serricorne, conditioned in plastic 10x10 cm containers with small punctures in the cover to allow internal aeration. The substratum previously infested was kept for 1 day in a acclimatized room at 27 ± 2 deg C, after this period the substratum was submitted to increasing doses of gamma radiation: 0; 0,5; 0,75; 1,0; 1,25; 1,50; 1,75; 2,0; 2,25; 2,50 e 2,75 kGy. After irradiation, the samples were kept in a acclimatized room at 27 ± 2 deg C of temperature and relative humidity of 70 ± 5 % and after a 45 days period the number of adults insects emerged was evaluated. The lethal dose of gamma radiation for L. serrricorne last instar larvae on Cymbopogon citratus stapf and Ocimun basillicum L. was 1,75 kGy. (author)

Use of gamma radiation cobalt 60 for disinfestation of Lasioderma serricorne (Fabricius, 1972) (Coleoptera: Anobiidae) in Cymbopogon citratus stapf and Ocimun basillicum L. dehydrated

Energy Technology Data Exchange (ETDEWEB)

Ramos, Amanda C.O.; Potenza, Marcos R.; Alves, Juliana N.; Justi Junior, Joao [Instituto Biologico, Sao Paulo, SP (Brazil). Centro de Pesquisa e Desenvolvimento de Sanidade Vegetal]. E-mail: potenza@biologico.sp.gov.br; Arthur, Valter [Centro de Energia Nuclear na Agricultura (CENA), Piracicaba, SP (Brazil)]. E-mail: arthur@cena.usp.br

2007-07-01

Stored products such as grains, flours, dry fruits and spices are normally infested by pests as beetles (Lasioderma serricorne), mites and moths, depreciating the product visually and promoting its deterioration. To improve the quality of spices, medicinal plants, seasoning and others foodstuffs there is a need for adequate methods of handling, correct identification of the species, adequate collection, pre and post-treatment procedures and adequate storage. The objective of this work was to determine the dose of gamma radiation for the disinfestations of medicinal and aromatic plants dehydrated infested by L. serricone. The plants used in this study were Cymbopogon citratus stapf (lemon grass) and Ocimun basillicum L. (basil) in this dehydrated form. The experiment was carried out in the Arthropods Laboratory of the Instituto Biologico/SP, during the months of January and May 2006, and the irradiations were carried out in the Instituto de Pesquisas Energeticas e Nucleares-IPEN/CNEN/SP, using an experimental Cobalt 60 irradiator, model Gammacell 220. Each treatment consisted of 5 parcels containing 10g of dehydrated products infested with 20 last instar larvae of L. serricorne, conditioned in plastic 10x10 cm containers with small punctures in the cover to allow internal aeration. The substratum previously infested was kept for 1 day in a acclimatized room at 27 {+-} 2 deg C, after this period the substratum was submitted to increasing doses of gamma radiation: 0; 0,5; 0,75; 1,0; 1,25; 1,50; 1,75; 2,0; 2,25; 2,50 e 2,75 kGy. After irradiation, the samples were kept in a acclimatized room at 27 {+-} 2 deg C of temperature and relative humidity of 70 {+-} 5 % and after a 45 days period the number of adults insects emerged was evaluated. The lethal dose of gamma radiation for L. serrricorne last instar larvae on Cymbopogon citratus stapf and Ocimun basillicum L. was 1,75 kGy. (author)

Evaluation of the Chemical Composition of Brazilian Commercial Cymbopogon citratus (D.C. Stapf Samples

Directory of Open Access Journals (Sweden)

Evandro de Castro Melo

2008-08-01

Full Text Available Abstract: The concentration and the chemical composition of the essential oils obtained from different samples of Cymbopogon citratus were evaluated. Among the 12 samples investigated (11 dried leaf samples and fresh plant leaves, seven presented essential oil concentrations within the threshold established by the Brazilian legislation. The moisture content was also determined and the majority of the samples presented humidity contents near 12%. The GC and GC/MS analyses of the essential oils led to identification of 22 compounds, with neral and geranial as the two major components. The total percentage of these two compounds varied within the investigated sample oils from 40.7% to 75.4%. In addition, a considerable variation in the chemical composition of the analyzed samples was observed. The process of grinding the leaves significantly decreased (by up to 68% the essential oil content, as well as the percentage of myrcene in the oils.

Protective effects of lemongrass (Cymbopogon citratus STAPF) essential oil on DNA damage and carcinogenesis in female Balb/C mice.

Science.gov (United States)

Bidinotto, Lucas T; Costa, Celso A R A; Salvadori, Daisy M F; Costa, Mirtes; Rodrigues, Maria A M; Barbisan, Luís F

2011-08-01

This study investigated the protective effect of oral treatment with lemongrass (Cymbopogon citratus STAPF) essential oil (LGEO) on leukocyte DNA damage induced by N-methyl-N-nitrosurea (MNU). Also, the anticarcinogenic activity of LGEO was investigated in a multi-organ carcinogenesis bioassay induced by 7,12-dimethylbenz(a)antracene, 1,2-dimethylhydrazine and N-butyl-N-(4-hydroxibuthyl)nitrosamine in Balb/C female Balb/c mice (DDB-initiated mice). In the short-term study, the animals were allocated into three groups: vehicle group (negative control), MNU group (positive control) and LGEO 500 mg kg⁻¹ (five times per week for 5 weeks) plus MNU group (test group). Blood samples were collected to analyze leukocyte DNA damage by comet assay 4 h after each MNU application at the end of weeks 3 and 5. The LGEO 500 mg kg⁻¹ treated group showed significantly lower (P lemongrass essential oil provided protective action against MNU-induced DNA damage and a potential anticarcinogenic activity against mammary carcinogenesis in DDB-initiated female Balb/C mice. Copyright © 2010 John Wiley & Sons, Ltd.

Modelagem matemática e parâmetros qualitativos da secagem de folhas de capim-limão [Cymbopogon citratus (DC. Stapf] Mathematical modeling and quality parameters of lemon grass [Cymbopogon citratus (DC. Stapf] leaf drying

Directory of Open Access Journals (Sweden)

A.P. Martinazzo

2010-12-01

Full Text Available A espécie Cymbopogon citratus, conhecida como capim-limão, é amplamente utilizada popularmente para fins medicinais e tem o uso nas indústrias farmacêuticas, alimentícias, de cosméticos e perfumaria. Devido à necessidade de conhecimentos específicos na área de pré-processamento, o presente trabalho tem a finalidade de equacionar e analisar alguns aspectos da secagem, que permitam prever as alterações na qualidade do produto. Folhas da referida espécie foram submetidas a cortes em diferentes comprimentos e à secagem em diferentes temperaturas. Aos dados experimentais, ajustaram-se diferentes equações para a modelagem das curvas de secagem. Realizaram-se também avaliações do produto seco, referentes à cor e ao teor do óleo essencial. Os resultados evidenciam que o modelo de Page Modificado é o que melhor se ajusta aos dados experimentais. A temperatura de 50ºC mostrou-se a mais indicada para a secagem da espécie, resultando em produto com menor perda do óleo essencial e maior preservação da cor verde.The species Cymbopogon citratus, known as lemon grass, is widely used for medicinal purpose and in the pharmaceutical, food, cosmetic and perfumery industries. Due to the need for more specific knowledge of pre-processing management, this work aims to equate and analyze some drying aspects that allow preview the product quality alterations. The leaves from this species were cut at different lengths and dried at different temperatures. Different equations for modeling the drying curves were adjusted to the experimental data. The dried product was also evaluated for color and essential oil content. The results showed that the Modified Page model resulted in the best adjustment for the experimental data. The temperature of 50°C was the best for drying the species leaves, resulting in less essential oil loss and higher green color maintenance.

Microscopic investigation to determine the effect of Beauveria bassiana (Bals.) Vuill. and Cymbopogon citratus (DC.) Stapf. treatment on different life stages of Musca domestica (L.).

Science.gov (United States)

Mishra, Sapna; Kumar, Peeyush; Malik, Anushree

2017-06-01

Microscopic investigation was done to determine the effect of entomopathogenic fungi, Beauveria bassiana and essential oil of Cymbopogon citratus on different life stages of Musca domestica . Scanning electron microscopy investigation of fungal infected larvae showed sluggish movement, rigor, and failure of body to balance in water. Treated larvae also revealed varied level of cuticle shrinkage and extreme dehydration. Surface of B. bassiana infected pupae showed varied stage of mycelial growth, while the cadaver of adult fly was observed to have extensive fungal growth covering their entire body surface. The application of C. citratus oils on M. domestica larvae resulted in skin shrinkage, spinous cells proliferation and bleb formation, while the treated pupae showed high incidence of incomplete emergence and malformation in emerged adult flies. The current study establishes effect of C. citratus essential oil and B. bassiana infection on different life stages of M. domestica .

Treatment of pityriasis versicolor with topical application of essential oil of Cymbopogon citratus (DC Stapf - therapeutic pilot study Tratamento de pitiríase versicolor com aplicação tópica do óleo essencial de Cymbopogon citratus (DC Stapf - estudo terapêutico piloto

Directory of Open Access Journals (Sweden)

Egberto Santos Carmo

2013-06-01

Full Text Available BACKGROUND: Pityriasis versicolor is a fungal infection caused by Malassezia spp. that has frequent relapses. OBJECTIVES: The main objective of this research was to perform phase I and II clinical studies, using formulations containing essential oil of Cymbopogon citratus in patients with pityriasis versicolor. METHODS: Phase I study included twenty volunteers to ascertain the safety of the formulations. In phase II, 47 volunteers randomly received essential oil formulations at 1.25 μL/mL concentration, for forty days. The shampoo should be applied three times a week and the cream twice a day. A control group in phase II, consisting of 29 volunteers, received the same formulations but with 2% ketoconazole as the active ingredient. RESULTS: No significant adverse events were observed in volunteers during Phase I. In Phase II, 30 (63.83% volunteers using essential oil and 18 (62.07% using ketoconazole remained until the end of the study. We observed a predominance of lesions in disseminated form, with M. sympodialis detected as the predominant agent identified in cultures. After 40 days of treatment, the rate of mycological cure was 60% (p FUNDAMENTOS: Pitiríase versicolor é uma micose causada pela Malassezia spp., e que apresenta frequentes recidivas. OBJETIVOS: Este trabalho objetivou realizar estudos clínicos de fase I e II, para essa patologia, com óleo essencial de Cymbopogon citratus. MÉTODOS: Na fase I, participaram vinte voluntários para averiguar a segurança das formulações. Na fase II, 47 voluntários receberam as formulações do óleo essencial a 1,25 μL/mL, as quais deveriam ser utilizadas por quarenta dias, sendo o xampu três vezes por semana e o creme duas vezes ao dia. Um grupo controle na fase II, constituído por 29 voluntários recebeu as mesmas formulações, com cetoconazol a 2%. RESULTADOS: Verificada a segurança das formulações com a finalização da fase I, onde nenhuma reação adversa significativa foi

Aromatic plant oils of the Peruvian Amazon. Part 2: Cymbopogon citratus (DC) Stapf., Renealmia sp., Hyptis recurvata Poit. and Tynanthus panurensis (Bur.) Sandw.

NARCIS (Netherlands)

Leclercq, P.A.; Delgado, H.S.; Garcia, J.; Hidalgo, J.E.; Cerrutti, T.; Mestanza, M.; Rios, F.; Nina, E.; Nonato, L.; Alvarado, R.; Menendez, R.

2000-01-01

The leaf oils of Cymbopogon citratus (lemongrass), Renealmia sp., and Hyptts recuroata, and the cortex oil of 1jmanthus panurensisfrom Peruvian Amazon have been isolated by hydrodistillation and analyzed by a combination of GC and GC/MS. Twelve, sixteen, and sixteen components have been identified

Polyphenols from Cymbopogon citratus leaves as topical anti-inflammatory agents.

Science.gov (United States)

Costa, Gustavo; Ferreira, João Pinto; Vitorino, Carla; Pina, Maria Eugénia; Sousa, João José; Figueiredo, Isabel Vitória; Batista, Maria Teresa

2016-02-03

A variety of plant polyphenols have been reported to have anti-inflammatory, frequently associated with erythema, edema, hyperplasia, skin photoaging and photocarcinogenesis. Cymbopogon citratus (DC). Stapf (Poaceae) is a worldwide known medicinal plant, used in traditional medicine in inflammation-related conditions. In this work, the anti-inflammatory potential of C. citratus infusion (CcI) and its polyphenols as topical agents was evaluated in vivo. The plant extract was prepared and its fractioning led two polyphenol-rich fractions: flavonoids fraction (CcF) and tannins fraction (CcT). An oil/water emulsion was developed with each active (CcI, CcF+CcT and diclofenac), pH and texture having been evaluated. Release tests were further performed using static Franz diffusion cells and all collected samples were monitored by HPLC-PDA. In vivo topical anti-inflammatory activity evaluation was performed by the carrageenan-induced rat paw edema model. The texture analysis revealed statistically significant differences for all tested parameters to CcF+CcT, supporting its topical application. Release experiments lead to the detection of the phenolic compounds from each sample in the receptor medium and the six major flavonoids were quantified, by HPLC-PDA: carlinoside, isoorientin, cynaroside, luteolin 7-O-neohesperidoside, kurilesin A and cassiaoccidentalin B. The CcF+CcT formulation prompted to the higher release rate for all these flavonoids. CcI4%, CcI1% and CcF+CcT exhibited an edema reduction of 43.18, 29.55 and 59.09%, respectively. Our findings highlight that CcI, containing luteolin 7-O-neohesperidoside, cassiaoccidentalin B, carlinoside, cynaroside and tannins have a potential anti-inflammatory topical activity, suggesting their promising application in the treatment of skin inflammatory pathologies. Copyright © 2015 Elsevier Ireland Ltd. All rights reserved.

Variação dos teores de constituintes voláteis de Cymbopogon citratus (DC Staf, Poaceae, coletados em diferentes regiões do Estado de São Paulo Variation in the amounts of volatile constituents of Cymbopogon citratus (DC Staf, Poaceae, collected in different regions of São Paulo State

Directory of Open Access Journals (Sweden)

Marcos R. Furlan

2010-11-01

Full Text Available O óleo essencial extraído de Cymbopogon citratus (DC Staf, Poaceae, é rico em citral sendo amplamente empregado na indústria química e farmacêutica. Os objetivos desse estudo foram avaliar o conteúdo de citral entre populações de C. citratus coletados em duas regiões diferentes (Ibiúna e Pindamonhangaba, Estado de São Paulo. O óleo essencial extraído de uma população cultivada em Pindamonhangaba-SP apresentou uma concentração alta de citral (aproximadamente 96,0%, enquanto que o óleo extraído da população de Ibiúna-SP apresentou, além de citral, proporções elevadas de outro monoterpeno, o geraniol. Adicionalmente, os óleos essenciais obtidos desta população de C. citratus foram extraídos e analisados ao longo de 24 h (a cada 3 h, sendo que o teor de citral foi maior no período da noite, o que mostra a importância de estudos que avaliam as diferenças químicas associadas às mudanças circadianas. Os componentes dos óleos essenciais foram identificados por RMN de 13C, CG/EM e CG através do índice de Kovats.The essential oil extracted from Cymbopogon citratus (DC Staf, Poaceae, is rich in citral and has many applications in chemical and pharmaceutical industry. The aims of this study were evaluate the amount of citral in populations of C. citratus collected in two different regions (Ibiúna and Pindamonhangaba, São Paulo State. The essential oil extracted of a cultivated population in Pidamonhangaba-SP, showed a high content of citral (approximately 96.0%, while the essential oil from Ibiuna-SP, showed citral and high amounts of another monoterpene, geraniol. Additionally, the essential oils from this population of C. citratus were extracted and analyzed during 24 h (each 3 h, being the major concentration of citral in the night period, indicating that studies which evaluated the chemical differences associated to circadian changes. The components of essential oils were identified through 13C NMR, GC/MS, GC and

Study of the chemical composition of essential oils and floral waters ...

African Journals Online (AJOL)

This work aimed to study the chemical composition of essential oils and floral waters of Cymbopogon citratus (DC.) Stapf (Poaceae) from Senegal. The plants were collected in two different localities, Dakar and. Kaolack. The extracts were obtained by steam distillation from both fresh and dried plants and analyses carried.

Carbon Dioxide Compensation Values in Citronella and Lemongrass 1

Science.gov (United States)

Herath, H. M. Walter; Ormrod, Douglas P.

1977-01-01

Carbon dioxide compensation values of mature leaves from 10 selections of citronella (Cymbopogon nardus [L.] Rendle) grown at 32/27 or 27/21 C day/night temperatures and three strains of lemongrass (Cymbopogon citratus [D.C.] Stapf. and Cymbopogon flexuosus [D.C.] Stapf.) grown at 8- or 15-hour photoperiods were measured in a controlled environment at 25 C. All leaves had low compensation values but citronella varied from 1.3 to 9.7 μl/liter and lemongrass from 0.7 to 3.5 μl/liter. Lower growing temperature generally resulted in lower compensation values for citronella but there was no consistent photoperiod effect on lemongrass. PMID:16659935

Study of the chemical composition of essential oils and floral waters ...

African Journals Online (AJOL)

This work aimed to study the chemical composition of essential oils and floral waters of Cymbopogon citratus (DC.) Stapf (Poaceae) from Senegal. The plants were collected in two different localities, Dakar and Kaolack. The extracts were obtained by steam distillation from both fresh and dried plants and analyses carried ...

Avaliação da composição química de Cymbopogon citratus Stapf cultivado em ambientes com diferentes níveis de poluição e a influência na composição do chá = Evaluation of the chemical composition of Cymbopogon citratus Stapf growing in environments with different pollution levels and the influence on tea composition

Directory of Open Access Journals (Sweden)

Maria Almerice Lopes da Silva

2010-01-01

Full Text Available Cymbopogon citratus Stapf, o popular capim-santo, é espécie originária da Índia, que chegou ao Brasil, possivelmente, no tempo colonial, e era utilizada como planta ornamental, sendo encontrada cultivada em todo o país. Diversos são os usos populares para essa planta, desde tratamento de dores estomacais, intestinais, antidiarreico, até anticelulite e estética de cabelos oleosos. Essa planta se desenvolve em ambientes insalubres como beira de estrada, e isso pode levar a mudanças no seu aspecto químico e, em consequência disso, mudanças em seus derivados. Este trabalho analisou se ocorreu variação da composição química da planta cultivada na presença ou ausência de estresse ambiental (poluição urbana. Foram pesquisados por meio de cromatografia de camada delgada os seguintes compostos: saponinas, iridoides e proantocianidinas, mono e sesquiterpenos, triterpenos e esteroides, luteolina, polifenóis e alcaloides. Concluiu-se que este fator pode ter contribuído para modificação da composição química de suas folhas, reduzindo a síntese de compostos mais polares e favorecendo a síntese de possíveis leucoantocianidinas para provável proteção. Isso poderá acarretar ao chá alterações em sua propriedade farmacológica e toxicológica.Cymbopogon citratus Stapf, popularly known as lemongrass, is an Indian species. It possibly arrived in Brazil during colonial times, where it was used as an ornamental plant, and is found growing throughout the country. There are several popular uses for this plant, including as treatment for stomach pains, diarrhea and cellulite. This plant grows in polluted and unpolluted environments such as roadsides, which can lead to changes in its chemical aspects, and consequently changes in its manufacturing products. This study examined whether there were changes in the chemical composition of plants grown in the presence or absence of environmental stress (urban pollution. The following

Isolasi Minyak Atsiri dari Sereh Merah (Andropogon citratus DC.) Segar dan Kering Serta Analisis Komponen Secara GC-MS

OpenAIRE

Situmorang, Betty Meilya

2013-01-01

Essential oil is a term used for volatile oil and obtained from part of plant such as leaves, flowers, fruit, bark and roots. Lemongrass oil is a major export commodities among the various types of essential oil. The main content of lemongrass oil are sitronellal and geraniol, and content oil of lemongrass is 0.5 to 1.2%. Andropogon citratus DC. of the family Poaceae is one of plant that contains essential oil and is widely used as a liniment. The objective of this research is to determine th...

Cymbopogon citratus and Cymbopogon giganteus essential oils have cytotoxic effects on tumor cell cultures. Identification of citral as a new putative anti-proliferative molecule.

Science.gov (United States)

Bayala, Bagora; Bassole, Imaël H N; Maqdasy, Salwan; Baron, Silvère; Simpore, Jacques; Lobaccaro, Jean-Marc A

2018-03-06

Cymbopogon species are used as traditional remedies in Burkina Faso for treating several diseases. We aimed to study the effects of their essential oils on cancer cell lines. For that purpose, Cymbopogon citratus (DC.) Stapf. and Cymbopogon giganteus Chiov. were studied for their essential oils after various chemical extractions. Antioxidant, potential anti-inflammatory action (inhibition of lipoxygenase) and cytotoxic activities were also tested on various prostate cancer and glioblastoma cell lines. Thirty-three compounds were identified in the essential oil of C. giganteus: Limonene (19.33%), Mentha-1(7),8-dien-2-ol cis (17.34%), Mentha-1(7),8-dien-2-ol trans (13.95%), trans-Mentha-2,8-diene-para-ol 1 (13.91%) and Mentha-2,8-diene-1-ol, cis-para (8.10%) were the most abundant. C. citratus essential oil contained 15 compounds and the major ones were geranial/citral A (48.18%) and neral/citral B (34.37%). Essential oil of C. citratus showed the highest ability to scavenge DPPH + radicals (approximately 68% at 8 mg/mL) while C. giganteus exhibited the highest capability to reduce ABTS + (0.59μmolET/g). The essential oil of C. citratus was the most effective on prostate cell lines LNCaP (IC 50  = 6.36 μg/ml) and PC-3 (IC 50  = 32.1 μg/ml), and on glioblastoma cell lines (SF-767 (IC 50  = 45.13 μg/ml) and SF-763 (IC 50  = 172.05 μg/ml). Interestingly, the activity of essential oil of C. citratus was statistically equal to that of its major component, citral. Combination of both oils showed antagonist, additive, indifferent and synergistic effects on LNCaP, PC-3, SF-767 and SF-763 cell lines, respectively. In conclusion, plants from the traditional medicine in Burkina Faso could be of interest for identifying new compounds, such as citral, for the treatment of prostate cancer and glioblastoma. Copyright © 2018 Elsevier B.V. and Société Française de Biochimie et Biologie Moléculaire (SFBBM). All rights reserved.

Evaluación de la toxicidad aguda de extractos de plantas medicinales por un método alternativo (Evaluation of acute toxicity of extracts of medicinal plants by an alternative testing)

OpenAIRE

Deodelsy Bermúdez Toledo:; |Emilio Monteagudo Jimenez; Maria Boffill Cárdenas; Luis E. Díaz Costa; Alexander Roca Simeón; Emoe Betancourt Morgado; Enrique A Silveira Prado

2007-01-01

Se evaluó la toxicidad a dosis única de seis extractos de plantas medicinales: Psidium guajava L. (guayaba), Eucalyptus citriodoraHooker (eucalipto de limón), Cymbopogon citratus (DC) Stapf (caña santa, hierba de limón), Hibiscus elatus Sw. (majagua), Justicia pectoralis Jacq. (tilo), Plectranthus amboinicus (Lour.) Spreng (orégano francés) mediante un método alternativo e internacionalmente validado y aceptado (procedimiento de dosis fijas) en ratasSprague Dawley. El grupo tratado recibió po...

Photosynthetic Rates of Citronella and Lemongrass 1

Science.gov (United States)

Herath, H. M. Walter; Ormrod, Douglas P.

1979-01-01

Ten selections of citronella (Cymbopogon nardus [L.] Rendle) were grown at 32/27, 27/21, or 15/10 C day/night temperatures, and plants from three populations of lemongrass (Cymbopogon citratus [D.C.] Stapf from Japan or Sri Lanka and Cymbopogon flexuosus [D.C.] Stapf from India) were grown at 8- or 15-hour photoperiods. Net photosynthetic rates of mature leaves were measured in a controlled environment at 25 C and 260 microeinsteins per meter2 per second. Rates declined with increasing leaf age, and from the tip to the base of the leaf blade. Rates for citronella leaves grown at 15/10 C were extremely low for all selections. Highest rates of net photosynthesis were recorded for four selections grown at 27/21 C and for two selections grown at 32/27 C. Lemongrass grown at 8-hour photoperiod had higher photosynthetic rates than that grown at 15-hour photoperiod. PMID:16660737

Efficacy of essential oils of Cymbopogon citratus (D.C.) Stapf, Lippia multiflora Moldenke and hot water in the control of seed-borne fungi Phoma sorghina and their effects on Sorghum bicolor (L.) Moench seed germination and plants development in Burkina Faso

OpenAIRE

Schémaeza BONZI1; Irénée SOMDA; Paco SEREME; Toudou ADAM

2013-01-01

The effects of two essential oils (Cymbopogon citratus and Lippia multiflora) and varying durations of hot water at 50°C on seed-borne fungi Phoma sorghina on five varieties of sorghum were evaluated using morphological traits. The varieties were ICSV 1001, Sariaso 03, ICSV 1049, Kapelga and the local variety, 1341So07. The results indicate that hot water treatment and essential oil of C. citratus significantly reduced the infection level of P. sorghina compared to untreated seeds, seeds trea...

Variação dos teores de constituintes voláteis de Cymbopogon citratus (DC Staf, Poaceae, coletados em diferentes regiões do Estado de São Paulo

Directory of Open Access Journals (Sweden)

Marcos R. Furlan

2010-10-01

Full Text Available O óleo essencial extraído de Cymbopogon citratus (DC Staf, Poaceae, é rico em citral sendo amplamente empregado na indústria química e farmacêutica. Os objetivos desse estudo foram avaliar o conteúdo de citral entre populações de C. citratus coletados em duas regiões diferentes (Ibiúna e Pindamonhangaba, Estado de São Paulo. O óleo essencial extraído de uma população cultivada em Pindamonhangaba-SP apresentou uma concentração alta de citral (aproximadamente 96,0%, enquanto que o óleo extraído da população de Ibiúna-SP apresentou, além de citral, proporções elevadas de outro monoterpeno, o geraniol. Adicionalmente, os óleos essenciais obtidos desta população de C. citratus foram extraídos e analisados ao longo de 24 h (a cada 3 h, sendo que o teor de citral foi maior no período da noite, o que mostra a importância de estudos que avaliam as diferenças químicas associadas às mudanças circadianas. Os componentes dos óleos essenciais foram identificados por RMN de 13C, CG/EM e CG através do índice de Kovats.

Atividade antibacteriana de óleos essenciais em cepas isoladas de infecção urinária Antibacterial activity of essential oils on microorganisms isolated from urinary tract infection

Directory of Open Access Journals (Sweden)

Rogério Santos Pereira

2004-04-01

Full Text Available A análise da atividade antibacteriana de óleos essenciais de ervas medicinais (Ocimum gratissimum, L., Cybopogum citratus (DC Stapf. e Salvia officinalis, L. foi verificada frente a 100 cepas de bactérias isoladas de indivíduos da comunidade com diagnóstico de infecção urinária. Os microrganismos foram semeados em ágar Muller Hinton e os extratos aplicados com replicador de Steers e incubados a 37°C por 24 horas. Verificou-se que Salvia officinalis, L. apresentou ação inibitória superior às outras ervas, tendo eficácia de 100% quando testadas em espécies de Klebsiella e Enterobacter, 96% em Escherichia coli, 83% contra Proteus mirabilis e 75% contra Morganella morganii.The antibacterial activity of essential oils extracted from medicinal plants (Ocimum gratissimum, L., Cybopogum citratus (DC Stapf., and Salvia officinalis, L. was assessed on bacterial strains derived from 100 urine samples. Samples were taken from subjects diagnosed with urinary tract infection living in the community. Microorganisms were plated on Müller Hinton agar. Plant extracts were applied using a Steers replicator and petri dishes were incubated at 37°C for 24 hours. Salvia officinalis, L. showed enhanced inhibitory activity compared to the other two herbs, with 100% efficiency against Klebsiella and Enterobacter species, 96% against Escherichia coli, 83% against Proteus mirabilis, and 75% against Morganella morganii.

The GABAergic system contributes to the anxiolytic-like effect of essential oil from Cymbopogon citratus (lemongrass).

Science.gov (United States)

Costa, Celso A Rodrigues de Almeida; Kohn, Daniele Oliveira; de Lima, Valéria Martins; Gargano, André Costa; Flório, Jorge Camilo; Costa, Mirtes

2011-09-01

The essential oil (EO) from Cymbopogon citratus (DC) Stapf is reported to have a wide range of biological activities and is widely used in traditional medicine as an infusion or decoction. However, despite this widely use, there are few controlled studies confirming its biological activity in central nervous system. The anxiolytic-like activity of the EO was investigated in light/dark box (LDB) and marble-burying test (MBT) and the antidepressant activity was investigated in forced-swimming test (FST) in mice. Flumazenil, a competitive antagonist of benzodiazepine binding and the selective 5-HT(1A) receptor antagonist WAY100635 was used in experimental procedures to determine the action mechanism of EO. To exclude any false positive results in experimental procedures, mice were submitted to the rota-rod test. We also quantified some neurotransmitters at specific brain regions after EO oral acute treatment. The present work found anxiolytic-like activity of the EO at the dose of 10mg/kg in a LDB. Flumazenil, but not WAY100635, was able to reverse the effect of the EO in the LDB, indicating that the EO activity occurs via the GABA(A) receptor-benzodiazepine complex. Only at higher doses did the EO potentiate diethyl-ether-induced sleeping time in mice. In the FST and MBT, EO showed no effect. Finally, the increase in time spent in the light chamber, demonstrated by concomitant treatment with ineffective doses of diazepam (DZP) and the EO, revealed a synergistic effect of the two compounds. The lack of activity after long-term treatment in the LDB test might be related to tolerance induction, even in the DZP-treated group. Furthermore, there were no significant differences between groups after either acute or repeated treatments with the EO in the rota-rod test. Neurochemical evaluation showed no amendments in neurotransmitter levels evaluated in cortex, striatum, pons, and hypothalamus. The results corroborate the use of Cymbopogon citratus in folk medicine and

Lemon grass (Cymbopogon citratus essential oil as a potent anti-inflammatory and antifungal drugs

Directory of Open Access Journals (Sweden)

Mohamed Nadjib Boukhatem

2014-09-01

Full Text Available Background: Volatile oils obtained from lemon grass [Cymbopogon citratus (DC. Stapf, Poaceae family] are used in traditional medicine as remedies for the treatment of various diseases. Aims: In the present study, lemon grass essential oil (LGEO was evaluated for its in vivo topical and oral anti-inflammatory effects, and for its in vitro antifungal activity using both liquid and vapor phases. Methods: The chemical profile of LGEO as determined by gas chromatography–mass spectrometry analysis revealed two major components: geranial (42.2%, and neral (31.5%. The antifungal activity of LGEO was evaluated against several pathogenic yeasts and filamentous fungi using disc diffusion and vapor diffusion methods. Results: LGEO exhibited promising antifungal effect against Candida albicans, C. tropicalis, and Aspergillus niger, with different inhibition zone diameters (IZDs (35–90 mm. IZD increased with increasing oil volume. Significantly, higher anti-Candida activity was observed in the vapor phase. For the evaluation of the anti-inflammatory effect, LGEO (10 mg/kg, administered orally significantly reduced carrageenan-induced paw edema with a similar effect to that observed for oral diclofenac (50 mg/kg, which was used as the positive control. Oral administration of LGEO showed dose-dependent anti-inflammatory activity. In addition, topical application of LGEO in vivo resulted in a potent anti-inflammatory effect, as demonstrated by using the mouse model of croton oil-induced ear edema. To our knowledge, this is the first such report to be published. The topical application of LGEO at doses of 5 and 10 µL/ear significantly reduced acute ear edema induced by croton oil in 62.5 and 75% of the mice, respectively. In addition, histological analysis clearly confirmed that LGEO inhibits the skin inflammatory response in animal models. Conclusion: Results of the present study indicate that LGEO has a noteworthy potential for the development of drugs for

Rendimento, composição química e atividade antilisterial de óleos essenciais de espécies de Cymbopogon Yield, chemical composition and antilisterial activity of essential oils from Cymbopogon species

Directory of Open Access Journals (Sweden)

M.M.M Oliveira

2011-01-01

Full Text Available Objetivou-se determinar o rendimento, a composição química e avaliar a atividade antilisterial dos óleos essenciais de Cymbopogon citratus (DC. Stapf. (capim-limão e Cymbopogon nardus (L. Rendle (capim-citronela, puros e em combinação. A obtenção dos óleos essenciais foi realizada a partir de folhas frescas, empregando-se a técnica de hidrodestilação e utilizando-se aparelho de Clevenger modificado. Os rendimentos foram calculados a partir da massa obtida na extração e da umidade do material vegetal. A análise qualitativa foi realizada por cromatografia em fase gasosa acoplada à espectrometria de massas e a avaliação dos teores dos constituintes químicos por cromatografia em fase gasosa com detector de ionização de chamas. O efeito bacteriostático de diferentes concentrações dos óleos essenciais, puros e em combinação, foi determinado pela técnica de difusão em ágar. As concentrações mínimas inibitórias (CMIs foram utilizadas na determinação do tempo de ação bactericida. O rendimento, em base seca, foi de 1,39% (v/p para o óleo essencial de C. citratus e de 2,27% (v/p para o óleo essencial de C. nardus. Geranial e neral foram os constituintes majoritários do óleo essencial de C. citratus, enquanto, para C. nardus, foram citronelal, geraniol e citronelol. A maioria das concentrações utilizadas mostrou-se efetiva contra Listeria monocytogenes e observaram-se efeitos bactericidas nas CMIs. Óleos essenciais de C. citratus e C. nardus, puros e em combinação, constituem novas alternativas de antibacterianos naturais a serem utilizados no controle de L. monocytogenes na indústria de alimentos.The aim of this study was to determine the yield and the chemical composition of essential oils from Cymbopogon citratus (DC. Stapf. (lemongrass and Cymbopogon nardus (L. Rendle (citronella, and to evaluate their antilisterial activity when pure and combined. The essential oils were obtained from fresh leaves

Extratos de plantas no controle de Rhipicephalus (Boophilus microplus (Canestrini, 1887 (Acari: Ixodidae em laboratório Plant extracts in control of Rhipicephalus (Boophilus microplus (Canestrini, 1887 (Acari: Ixodidae in laboratory

Directory of Open Access Journals (Sweden)

Sônia Maria Forti Broglio-Micheletti

2009-12-01

Full Text Available Extratos vegetais foram estudados com o objetivo de avaliar suas eficiências no controle de Rhipicephalus (Boophilus microplus (Canestrini, 1887 em laboratório. Fêmeas ingurgitadas de carrapato foram coletadas de bovinos e mantidas em placas de Petri. Foram utilizados extratos orgânicos alcoólicos 2% (peso/volume de sementes de Annona muricata L. (Annonaceae (graviola; flores de Syzygium malaccensis (L. (Myrtaceae (jambo; folhas de Cymbopogon citratus (DC. Stapf (Poaceae (capim-santo; folhas de Azadirachta indica A. Juss (Meliaceae (nim; e extrato hexânico na mesma concentração de A. indica (sementes. Os grupos-controle foram compostos por fêmeas sem tratamento e fêmeas tratadas com água destilada e esterilizada e dimetilsulfóxido (DMSO a uma concentração de 1%. O extrato de A. muricata apresentou o maior poder acaricida, com eficácia de 100%, seguido dos extratos de S. malaccensis (75 e 59,24% e A. indica (65 e 38,49%. Houve 100% de redução na eclosão das larvas quando se utilizou o extrato de sementes de A. muricata.Plant extracts were studied to evaluate its efficiency in the control of Rhipicephalus (Boophilus microplus (Canestrini, 1887 in laboratory. Engorged female ticks were collected from the cattle, kept in Petri dishes. Organic alcoholic extracts 2% (weight/volume were used: seeds of Annona muricata L. (Annonaceae (soursop; flowers of Syzygium malaccensis (L. (Myrtaceae (iamb, leaves of Cymbopogon citratus (DC. Stapf (Poaceae (holy grass, leaves of Azadirachta indica A. Juss (Meliaceae (neem and hexane extract 2% (weight/volume of A. indica (seeds. The control groups consisted of untreated females and females treated with distilled water and sterile and dimethylsulfoxide (DMSO a concentration of 1%. The extract of A. muricata (seed had the highest mortality with acaricide activity and 100% efficacy followed by extracts of S. malaccensis (75 and 59.24% and A. indica (65 and 38.49%. The seed extract of A. muricata

Phytoconstituents and diuretic activity of Cymbopogon citratus leaf infusions in humans

Directory of Open Access Journals (Sweden)

Christopher Ekpenyong

2014-09-01

Full Text Available Objective: To assess the diuretic activity of infusions prepared from Cymbopogon citratus (C. citratus leaves in healthy volunteers. Methods: One hundred and five subjects (55 men and 50 women aged 18 to 35 years were randomly assigned to groups set to orally receive infusions prepared from 2, 4, or 8 g of C. citratus leaf powder, once daily for 30 d. Urine volume, frequency of urination, urine specific gravity, and plasma and urinary levels of electrolytes were assessed 1 day before (baseline, and at 10 and 30 d after initiation of treatment. Computed diuretic indices were compared between experimental and baseline values. Results: Subjects treated with infusions prepared from C. citratus leaf powder which tested positive for saponins, tannins, flavaniods, phenols, anthraquinones, alkaloids, and deoxy-sugar exhibited a significant increase in indices of diuresis including urine volume, urination frequency, diuretic action, natriuretic and saliuretic indices and renal fractional excretion of electrolytes and metabolic acidosis. A non-significant change in urine specific gravity was observed in all groups. eGFR showed a non-significant increase at Day 10, but decreased significantly (P<0.05 at Day 30. Thiazide and aldosterone secretion indices decreased at Day 10, whereas carbonic anhydrase index increased significantly (P<0.05 at both Days 10 and 30. Conclusions: These results indicate a loop active diuretic action of C. citratus infusion.

Allelopathic effect of melissa, lemongrass, lavender and rosemary on germination and vigor of lettuce seeds

Directory of Open Access Journals (Sweden)

Daniela Aparecida Teixeira

2014-12-01

Full Text Available The objective of this study was to evaluate the influence of four herbal plants on the germination and vigor of lettuce seeds, using aqueous preparations and teas of Melissa oficinalis L. (melissa, Rosmarinus oficinalis L. (rosemary, Lavandula angustifolia Mill. (lavender and Cymbopogon citratus (DC. Stapf. (lemongrass. A randomized complete block design was used with 9 treatments and 4 repetitions. The treatments were: Melissa tea, melissa aqueous preparation, rosemary tea, rosemary aqueous preparation, lavender tea, lavender aqueous preparation, lemongrass tea, lemongrass aqueous preparation and control. The variables evaluated were: germination speed index, percentage of abnormal plants, percentage of germinated plants, fresh matter, dry matter, shoot length and radicle length. Lemongrass showed negative allelopathic effects on germination and vigor of L. sativa L. Melissa tea had a stimulatory effect.

Anthelmintic activity of Cymbopogon citratus against Haemonchus contortus

Directory of Open Access Journals (Sweden)

Iara Tersia Freitas Macedo

Full Text Available Parasitic nematodes are of major economic importance in livestock. An alternative for the control of parasites is phytotherapy. This study evaluated the efficacy of Cymbopogon citratus decoction (CcD, C. citratus essential oil (CcEo and citral against Haemonchus contortus using in vitro egg hatch test (EHT and larval development test (LDT and an in vivo test using a Meriones unguiculatus (gerbil model. The effect of 800 mg/kg CcEo was evaluated in gerbils that had been artificially infected with 5,000 third-stage H. contortus larvae. The effective concentrations required to inhibit 50% (EC50 of egg hatching were 0.46, 0.14 and 0.13 mg/mL for CcD, CcEo and citral, respectively. The EC50 values in the LDT were 5.04, 1.92 and 1.37 mg/mL for CcD, CcEo and citral, respectively. H. contortus population in the group treated with C. citratus essential oil was reduced by 38.5% (P< 0.05 in comparison to the control group. These results suggest that it may be possible to use C. citratusessential oil to control of H. contortus parasite of small ruminant.

IN-VITRO PROPAGATION OF Picralima nitida (Stapf) - A threatened ...

African Journals Online (AJOL)

Dr. Gbadamosi

Picralima nitida (Stapf), a medicinal tropical plant, by culturing excised embryo from mature seeds collected from the ... plant tissue culture and micropropagation techniques play an important ..... A medicinal orchid via seed culture. Sci. Hort.

Allelopathic effect of melissa, lemongrass, lavender and rosemary on germination and vigor of lettuce seeds

Directory of Open Access Journals (Sweden)

Daniela Aparecida Teixeira

2014-09-01

Full Text Available http://dx.doi.org/10.5007/2175-7925.2014v27n4p37 The objective of this study was to evaluate the influence of four herbal plants on the germination and vigor of lettuce seeds, using aqueous preparations and teas of Melissa officinalis L. (melissa, Rosmarinus officinalis L. (rosemary, Lavandula angustifolia Mill. (lavender and Cymbopogon citratus (DC. Stapf. (lemongrass. A randomized complete block design was used with 9 treatments and 4 repetitions. The treatments were: melissa tea, melissa aqueous preparation, rosemary tea, rosemary aqueous preparation, lavender tea, lavender aqueous preparation, lemongrass tea, lemongrass aqueous preparation and control. The variables evaluated were: germination speed index, percentage of abnormal plants, percentage of germinated plants, fresh matter, dry matter, shoot length and radicle length. Lemongrass showed negative allelopathic effects on germination and vigor of L. sativa L. Melissa tea had a stimulatory effect.

Evaluation of the lemongrass plant (Cymbopogon citratus extracted in different solvents for antioxidant and antibacterial activity against human pathogens

Directory of Open Access Journals (Sweden)

Balachandar Balakrishnan

2014-02-01

Full Text Available Objective: To test antibacterial and antioxidant activity of the lemongrass plant Cymbopogon citratus (C. citratus leaves extracted serially by the solvents (chloroform, methanol and water. Methods: The plant leaves extracts were used for antibacterial activity on Bacillus subtilis, Pseudomonas aeruginosa, Proteus vulgaris, Staphylococcus aureus, Nocardia sp., Serratia sp., and Enterobacter aeruginosa microorganisms by the Kirby Bauer agar disc diffusion method. This study was carried out on lemongrass plant leaf extracts in different concentration of all solvents. The leaf extracts from different solvents were tested for their scavenging activity against the stable free radical DPPH in quantization using a spectrophotometric assay. Oxidative damage was induced in vitro by treating blood DNA and analyzing the effects of the leaf extracts. Results: The results showed that C. citratus extracts exhibited maximum zones of inhibition in chloroform, methanol and water extracts. It was Observed that the C. citratus extracts exhibited maximum zone of inhibition against Bacillus subtilis, Pseudomonas aeruginosa and Proteus vulgaris. Analyzed data in the present work suggested that antibacterial activity of C. citratus plant leaf extracts showed good results for Gram-positive and Gram-negative organisms. DPPH scavenging activity was highly elicited by the extract of C. citratus. Chloroform, methanol and water extracts of C. citratus leaves effectively decreased the extent of DNA damage. Conclusions: The present study suggested that the lemongrass plant extracts could offer various health benefits.

In-vitro propagation of Picralima nitida (Stapf) through embryo culture

African Journals Online (AJOL)

Embryo abortion in wide crosses and seed dormancy has hampered the mass propagation of selected tree germplasm from the wild. An in vitro plant regeneration protocol was successfully established in Picralima nitida (Stapf), a medicinal tropical plant, by culturing excised embryo from mature seeds collected from the ...

Lemongrass and citral effect on cytokines production by murine macrophages.

Science.gov (United States)

Bachiega, Tatiana Fernanda; Sforcin, José Maurício

2011-09-01

Cymbopogon citratus (DC) Stapf (Poaceae-Gramineae), an herb commonly known as lemongrass (LG), is an important source of ethnomedicines as well as citral, the major constituent of Cymbopogon citratus, used in perfumery, cosmetic and pharmaceutical industries for controlling pathogens. Thus, the goal of this work was to analyze the effect of LG and citral on cytokines production (IL-1β, IL-6 and IL-10) in vitro, as well as before or after LPS incubation. Peritoneal macrophages from BALB/c mice were treated with LG or citral in different concentrations for 24h. The concentrations that inhibited cytokines production were tested before or after macrophages challenge with LPS, in order to evaluate a possible anti-inflammatory action. Supernatants of cell cultures were used for cytokines determination by ELISA. As to IL-1β, only citral inhibited its release, exerting an efficient action before LPS challenge. LG and citral inhibited IL-6 release. Cymbopogon citratus showed inhibitory effects only after LPS challenge, whereas citral prevented efficiently LPS effects before and after LPS addition. Citral inhibited IL-10 production and although LG did not inhibit its production, the concentration of 100 μg/well was tested in the LPS-challenge protocol, because it inhibited IL-6 production. LG inhibited LPS action after macrophages incubation with LPS, while citral counteracted LPS action when added before or after LPS incubation. LG exerted an anti-inflammatory action and citral may be involved in its inhibitory effects on cytokines production. We suggest that a possible mechanism involved in such results could be the inhibition of the transcription factor NF-κB. Copyright © 2011 Elsevier Ireland Ltd. All rights reserved.

Efeito repelente de azadiractina e óleos essenciais sobre Aphis gossypii Glover (Hemiptera: Aphididae em algodoeiro Repellent effect of azadirachtin and essential oils on Aphis gossypii Glover (Hemiptera: Aphididae in cotton plants

Directory of Open Access Journals (Sweden)

Lígia Helena de Andrade

2013-09-01

Full Text Available A repelência de inseticidas botânicos tem se destacado como uma tática promissora no controle alternativo de pragas agrícolas e urbanas, podendo ser um dos componentes do manejo integrado de pragas. Objetivou-se com este trabalho identificar a repelência de inseticidas botânicos sobre fêmeas ápteras de Aphis gossypii Glover. Testes com chance de escolha foram realizados com discos de folha de algodoeiro, imersos nas caldas dos inseticidas e testemunha (água destilada com DMSO a 2%. Utilizou-se azadirachtina (0,075% e os óleos essenciais de Piper hispidinervum CDC, P. aduncum L., Cymbopogon winterianus (L., C. citratus (D.C. Stapf, Foeniculum vulgare Mill, Syzygium aromaticum (L. Merrill e Perry, Cinnamomum zeylanicum Blume, Schinus terebinthifolius Raddi e Chenopodium ambrosioides L. na concentração de 0,05%. C. citratus, C. winterianus, P. aduncum, S. terebinthifolius, azadirachtina e C. zeylanicum apresentaram os maiores percentuais de repelência, 100; 84; 66,67; 64; 60,87 e 48% respectivamente e reduziram a produção de ninfas em 100; 92; 42,9; 87,5; 80,65 e 89,74%, apresentando resultados significativos pelo teste do χ2 ao nível de 10% de probabilidade. Nos testes com F. vulgare (χ2 = 3,66, P = 0,05 as fêmeas de A. gossypii foram atraídas significativamente para os discos tratados e ocorreu um aumento na produção de ninfas nos resultados obtidos para F. vulgare (χ2 = 5,87, P = 0,02 e C. ambrosioides (χ2 = 14,31, P = 0,001.The repellence of botanical insecticides has emerged as a promising technique in the alternative control of urban and agricultural pests, being seen as one component of integrated pest management. The aim of this work was to identify the repellence of botanical insecticides on apterous females of Aphis gossypii Glover. Random-choice tests were carried out with discs from the leaves of cotton plants immersed in insecticide solution and in a control (distilled water with 2% DMSO. Azadirachtin was used

Activité larvicide sur Anopheles gambiae Giles et composition chimique des huiles essentielles extraites de quatre plantes cultivées au Cameroun

Directory of Open Access Journals (Sweden)

Tchoumbougnang F.

2009-01-01

Full Text Available Larvicidal activity against Anopheles gambiae Giles and chemical composition of essential oils from four plants cultivated in Cameroon. The chemical composition of the essential oils obtained by hydrodistillation of dry leaves from Cymbopogon citrates (DC. Stapf, Ocimum canum Sims, Ocimum gratissimum L. var 'gratissimum' L. and Thymus vulgaris L. cultivated in Cameroon were analyzed and their larvicidal activity against fourth instar larvae of Anopheles gambiae Giles were determined. The yields of extraction indicate that T. vulgaris (0.95% was richer in essential oil than C. citratus (0.67%. O. canum and O. gratissimum have approximately the same content in volatile constituents (0.59% and 0.60%, respectively. The analyses by GC and GC/MS showed that these oils are monoterpenic (86.8-97.4%. Oxygenated monoterpenes predominate in C. citratus and O. canum (81.6% and 68.9%, respectively while O. gratissimum oil contains a majority of monoterpene hydrocarbons (61.0%. T. vulgaris is characterized by the same proportion of monoterpene hydrocarbons (45.6% and oxygenated monoterpenes (48.9%. The main compounds found in the essential oil of C. citratus are acyclic monoterpenes such as geraniol (15.6%, geranial (39.3%, neral (21.9% and myrcene (14.0%. The essential oil of T. vulgaris is characterized by p-menthane structures given by thymol (40.1%, p-cymene (23.4% and γ-terpinene (15.1%; p-cymene (32.1% and thymol (24.3% were also the constituents quantitatively important in O. gratissimum essential oil while linalool (56.3% and limonene (10.9% were predominant in O. canum. Bioassay test done by the World Health Organization standard protocol revealed that these essential oils have remarkable larvicidal properties as they could induce 100% mortality in the larvae of A. gambiae at the concentration of 100 ppm for C. citratus, 200 ppm with T. vulgaris, 350 ppm for O. gratissimum and 400 ppm for O. canum. Their LC50 and LC80 show the same reactivity order

In vitro cytotoxic activity of Cymbopogon citratus L. and Cymbopogon nardus L. essential oils from Togo

Directory of Open Access Journals (Sweden)

Koffi Koba

2009-06-01

Full Text Available The leaf essential oils of Cymbopogon citratus L. and Cymbopogon nardus L.(Poaceae from Togo were steam-distilled, analyzed for percentage composition and investigated in vitro for their potential cytotoxic activity on human epidermic cell line HaCat. The percentage composition showed that the main constituents of essential oils samples were respectively geranial (45.2%, neral(32.4% and myrcène (10.2% for C. citratus essential oil and citronellal (35.5%, geraniol (27.9% and citronellol (10.7% for that of C. nardus. The in vitro cytotoxicity bioassays on human epidermic cell line HaCaT revealed that the toxicityof the essential oil from C. citratus (IC50: 150 μL.mL-1 was higher than that of the essential oil from C. nardus (IC50: 450 μL.mL-1. Pure commercial neral, geranial, and citronellal standards showed respectively the following IC50 values: 100, 250 and 300 μL.mL-1. Conversely, pure citronellol standard appeared almost non-toxic (IC50>1000 μL.mL-1, proving the major role played in synergyby neral and geranial in the overall toxicity showed by the citratus oil sample tested in this work.

In vitro cytotoxic activity of Cymbopogon citratus L. and Cymbopogon nardus L. essential oils from Togo

Directory of Open Access Journals (Sweden)

Koffi Koba

2009-03-01

Full Text Available The leaf essential oils of Cymbopogon citratus L. and Cymbopogon nardus L. (Poaceae from Togo were steam-distilled, analyzed for percentage composition and investigated in vitro for their potential cytotoxic activity on human epidermic cell line HaCat. The percentage composition showed that the main constituents of essential oils samples were respectively geranial (45.2%, neral (32.4% and myrc¨ne (10.2% for C. citratus essential oil and citronellal (35.5%, geraniol (27.9% and citronellol (10.7% for that of C. nardus. The in vitro cytotoxicity bioassays on human epidermic cell line HaCaT revealed that the toxicity of the essential oil from C. citratus (IC50: 150 µL.mL-1 was higher than that of the essential oil from C. nardus (IC50: 450 µL.mL-1. Pure commercial neral, geranial, and citronellal standards showed respectively the following IC50 values: 100, 250 and 300 µL.mL-1. Conversely, pure citronellol standard appeared almost non-toxic (IC50>1000 µL.mL-1, proving the major role played in synergy by neral and geranial in the overall toxicity showed by the citratus oil sample tested in this work.

Combination of Cymbopogon citratus and Allium cepa essential oils increased antibacterial activity in leafy vegetables.

Science.gov (United States)

Ortega-Ramirez, Luis A; Silva-Espinoza, Brenda A; Vargas-Arispuro, Irasema; Gonzalez-Aguilar, Gustavo A; Cruz-Valenzuela, M Reynaldo; Nazzaro, Filomena; Ayala-Zavala, J Fernando

2017-05-01

Cymbopogon citratus and Allium cepa essential oils (EOs) are rich in terpenes and sulfur compounds respectively, both with antibacterial activity and different cell targets, supporting the idea that their combination can increase their efficacy. Major constituents of C. citratus were geranial and neral, while A. cepa presented dipropyl disulfide and dipropyl trisulfide. Cymbopogon citratus and A. cepa EOs inhibited the in vitro growth of Escherichia coli O157:H7 (minimal inhibitory concentrations of 2.21 and 5.13 g L -1 respectively), Salmonella Choleraesuis (3.04 and 1.28 g L -1 ), Listeria monocytogenes (1.33 and 2.56 g L -1 ) and Staphylococcus aureus (0.44 and 5.26 g L -1 ). Application of the EO combination to spinach caused a greater reduction in E. coli (2.34 log colony-forming units (CFU) g -1 ), S. Choleraesuis (2.94 log CFU g -1 ), L. monocytogenes (2.06 log CFU g -1 ) and S. aureus (1.37 log CFU g -1 ) compared with higher doses of individual EOs; a similar effect was observed for romaine lettuce. Individual and combined EOs caused a reduction in flavor acceptability level; however, no significant differences were found among odor acceptability of control vegetables and those treated with the EO combination and C. citratus EO. Leafy vegetables treated with the EO combination showed higher antibacterial protection and odor acceptability compared with individual EO treatments. © 2016 Society of Chemical Industry. © 2016 Society of Chemical Industry.

Efficacité des huiles essentielles de Cymbopogon citratus et de ...

African Journals Online (AJOL)

essential oils extracted from leaves of Cymbopogon citratus and Mentha piperita in conservation of fresh cow's milk in southern Benin. ... Mentha piperita essential oil has menthol (46.7%) and neomenthol (8.28%) as major compounds with a hydrogenated ..... des feuilles et fruits de Xylopia aethiopica (Dunal) A. Rich.

Inhibitory action of some essential oils and phytochemicals on the growth of various moulds isolated from foods

Directory of Open Access Journals (Sweden)

Evandro Leite de Souza

2005-03-01

Full Text Available The aim of this study was to determine the sensitivity profile of mould strains isolated from foods to some essential oils and phytochemicals. The assayed mould strains were: Fusarium spp., Rhizopus spp., Aspergillus flavus, A. niger and Penicillium spp. According to results, Lippia alba N.E. Brown, Peumus boldus Molina, Lippia microphylla Phil., Citrus limon Risso and Cymbopogon citratus Stapf. essential oil and the phytochemicals citral, eugenol and mircene showed prominent antimould activity. Among the products that evidenced antimould activity, citral and eugenol showed the lowest minimum inhibitory concentrations, which was 1% and 4%, respectively, for the most of the tested mould strains.O objetivo deste estudo foi determinar o perfil de sensibilidade de cepas de fungos filamentosos isolados de alimento a alguns óleos essenciais e fitoconstituintes. As cepas fúngicas utilizadas nos ensaios antimicrobianos foram: Fusarium spp., Rhizopus spp., Aspergillus flavus, A. niger e Penicillium spp. De acordo com os resultados obtidos, os óleos essenciais de L. Alba N.R. Brown, P. boldus Molina, L. microphylla Phill, C. limon Risso e C. citratus Stapf. e os fitoconstituintes citral, eugenol e mirceno mostraram destacada atividade antifúngica. Dentre os produtos que apresentaram atividade antifúngica, o citral e eugenol mostraram as menores CIM's, as quais foram 1% e 4%, respectivamente, para a maioria das cepas fúngicas testadas.

Toxicity of lemon grass Cymbopogon citratus powder and methanol extract against rice weevil Sitophilus oryzae (Coleoptera: Curculionidae

Directory of Open Access Journals (Sweden)

Martin Osaigbokan Uwamose

2017-03-01

Full Text Available Objective: To evaluate the toxicity potential of lemon grass [Cymbopogon citratus (C. citratus] products against adult rice weevil, Sitophilus oryzae. Methods: Lemon grass (C. citratus leaves were sundried for 7 days, pulverized and sieved using 0.5 mm mesh size to obtain fine powders. About 500 g of the powder were dissolved in 1000 mL of 90% methanol to produce the extract. The powder and extract were used for the bioassay. The powder was tested at 1.0, 1.5, 2.0 and 2.5 g/10 g rice grains, respectively. The toxic potential of the extract of concentration of 1.0, 1.5, 2.0, and 2.5 mg/mL were evaluated using the filter paper method. The experiment was setup on a completely randomized design using three replicates per treatment. Results: The results indicated significant difference (F = 7.450; df = 3.15; P < 0.05 in mean percentage mortality after 24, 48, 72, and 96 h exposure with the powder compared with the control. Significantly (F = 5.519; df = 3.15; P < 0.05 higher percentage adult mortality was also observed in the extract after 24, 48, 72, and 96 h exposure compared with the control. The LC50 value of the powder was 4.91 g/10 g of rice while the LT50 was 160.51 h. The LC50 value of the extract was 2.16 mg/20 mL of methanol with an LT50 of 75.10 h. The methanol extract of C. citratus showed the highest mortality compared to the powder which was less toxic. Conclusions: The study showed that C. citratus products are promising insecticides and can be used effectively in the management of Sitophilus oryzae in storage..

A Weibull model to describe antimicrobial kinetics of oregano and lemongrass essential oils against Salmonella Enteritidis in ground beef during refrigerated storage.

Science.gov (United States)

de Oliveira, Thales Leandro Coutinho; Soares, Rodrigo de Araújo; Piccoli, Roberta Hilsdorf

2013-03-01

The antimicrobial effect of oregano (Origanum vulgare L.) and lemongrass (Cymbopogon citratus (DC.) Stapf.) essential oils (EOs) against Salmonella enterica serotype Enteritidis in in vitro experiments, and inoculated in ground bovine meat during refrigerated storage (4±2 °C) for 6 days was evaluated. The Weibull model was tested to fit survival/inactivation bacterial curves (estimating of p and δ parameters). The minimum inhibitory concentration (MIC) value for both EOs on S. Enteritidis was 3.90 μl/ml. The EO concentrations applied in the ground beef were 3.90, 7.80 and 15.60 μl/g, based on MIC levels and possible activity reduction by food constituents. Both evaluated EOs in all tested levels, showed antimicrobial effects, with microbial populations reducing (p≤0.05) along time storage. Evaluating fit-quality parameters (RSS and RSE) Weibull models are able to describe the inactivation curves of EOs against S. Enteritidis. The application of EOs in processed meats can be used to control pathogens during refrigerated shelf-life. Copyright © 2012 Elsevier Ltd. All rights reserved.

Antifungal activity of Cymbopogon citratus against Colletotrichum gloesporioides

Directory of Open Access Journals (Sweden)

Alexander Francisco Pérez Cordero

2017-04-01

Full Text Available The objective of this research was to evaluate in vitro the inhibitory activity of essential oils from fresh leaves of Cymbopogon citratus (lemongrass against Colletotrichum gloeosporioides in yam. The research was conducted in the department of Sucre, Colombia. The essential oils of C. citratus were collected in the municipalities of Sincelejo, La Union and Sampues, in September and October 2015. The essential oil was extract from fresh leaves using the microwave-assisted hydrodistillation. Concentrations of 5000, 8000 and 10 000 ppm of each essential oil were prepared. An absolute control, a positive control (benomyl 1 g/l and a negative control was used. An inhibitory activity was obtained by using the direct seeding on surface of the potato-dextrose-agar method and it was expressed as percentage of inhibition rate. The chemical characterization of essential oils was performed by gas chromatography coupled to mass spectrometry. The highest percentages of antifungal index were observed in the lemongrass from Sincelejo at concentrations of 5000, 8000 and 10 000 ppm, after in La Union at 8000 and 10 000 ppm, and finally at Sampues at 10 000 ppm, with a value of 97.77%; the effect was similar to the positive control with benomyl 1 g/l. Citral was the main constituent of the essential oils extracted. The essential oils obtained from the three municipalities showed antifungal activity against C. gloeosporioides.

WELFARE OF BROILERS INGESTING A PRE-SLAUGHTER HYDRIC DIET OF LEMON GRASS

Directory of Open Access Journals (Sweden)

AFB Royer

2015-09-01

Full Text Available ABSTRACTThe pre-slaughter period is considered critical in broiler production. Several factors contribute to increase the birds' stress, such as handling, harvesting, and transportation, negatively affecting their welfare. This study aimed at evaluating the addition of lemon grass (Cymbopogon citratusStapf to the drinking water of broilers during the pre-slaughter period on their behavior, blood cortisol, and surface temperature. The study was carried out at the experimental farm of the Federal University of Grande Dourados (UFGD, Dourados, MS, Brazil. In total, 2594 broilers were distributed according to a completely randomized experimental design, in a 3x2x2 factorial arrangement, with four replicates per treatment. Treatments consisted of three different lemon grass levels (Cymbopogon citratus Stapf used in the form of an infusion (0, 0.1, and 5 g per L of water, sex (male or female, and genetic strain (Ross(r 308 or Cobb(r 500. The infusion was offered when birds were 42 days old. On that day, blood was collected for blood cortisol level determination, broiler surface temperature was recorded, and an ethogram was applied to register broiler behavior. Blood cortisol level and broiler surface temperature were not affected by treatments (p>0.05. The behavior of beak opening was different between the genetic strains (p<0.05, being more frequent in Ross(r 308 broilers. Lemon grass water content did not affect broilers' surface temperature when consumed during the pre-slaughter period.

Repellent effects of the essential oils of Cymbopogon citratus and Tagetes minuta on the sandfly, Phlebotomus duboscqi.

Science.gov (United States)

Kimutai, Albert; Ngeiywa, Moses; Mulaa, Margaret; Njagi, Peter G N; Ingonga, Johnstone; Nyamwamu, Lydia B; Ombati, Cyprian; Ngumbi, Philip

2017-02-15

The sandfly, Phlebotomus duboscqi is a vector of zoonotic cutaneous leishmaniasis (ZCL) that is an important public health problem in Eastern Africa. Repellents have been used for protection of humans against vectors of ZCL and other vectors that transmit killer diseases including malaria, Rift Valley fever, dengue, and yellow fever. The repellent effects of different doses of the essential oils from the lemon grass, Cymbopogon citratus and Mexican marigold, Tagetes minuta were evaluated in a two-chamber bioassay against 3- to 7-day-old unfed females of P. duboscqi in the laboratory. The results were compared with those that were obtained when test animals were treated with an equivalent dose of diethyl-3-methylbenzamide, which is a repellent that is commonly used as a positive control. Overall, percentage repellency increased with increasing doses of the essential oils while biting rates decreased with increasing concentrations of the oils. Further, the oil of C. citratus was more potent than that of T. minuta with regard to protection time and biting deterrence. The effective doses at 50% (ED 50 ) and at 90% (ED 90 ) for the oil of C. citratus, were 0.04 and 0.79 mg/ml, respectively. Those of the oil of T. minuta were 0.10 and 12.58 mg/ml. In addition, the percentage repellency of 1 mg/ml of the essential oils of C. citratus and T. minuta against sandflies was 100% and 88.89%, respectively. A lower dose of 0.5 mg/ml of the oils, elicited 89.13% repellency for C. citratus and 52.22% for T. minuta. The laboratory tests showed that the essential oils of the two plants were highly repellent to adult sand flies, P. duboscqi. Thus, the two essential oils are candidate natural repellents that can be used against P. duboscqi due to their high efficacy at very low doses, hence, the envisaged safety in their use over chemical repellents. It remains to carry out clinical studies on human subjects with appropriate formulations of the oils prior to recommending their

Estudo da concordância das citações de uso e importância das espécies e famílias utilizadas como medicinais pela comunidade do bairro Ponta Grossa, Porto Alegre, RS, Brasil

Directory of Open Access Journals (Sweden)

Giovana Secretti Vendruscolo

2006-06-01

Full Text Available Ferramentas para quantificar dados etnobotânicos estão sendo usadas como complementares aos levantamentos sobre a utilização de plantas por populações. Neste trabalho são utilizadas técnicas para avaliar a concordância das citações de uso e a importância das espécies e famílias para as 51 pessoas entrevistadas no bairro Ponta Grossa, Porto Alegre, Rio Grande do Sul. Para tal, foram utilizados os cálculos de Valor de Uso (UV e a porcentagem corrigida de Concordância quanto aos Usos Principais (CUPc para as 142 espécies mencionadas no levantamento. As espécies Aloe arborescens Mill., Citrus × aurantium L., Achyrocline satureioides (Lam. DC., Foeniculum vulgare Mill, Eugenia uniflora L., Cunila microcephala Benth., Citrus limon (L. Osveck, Plectranthus barbatus Andrews, Cymbopogon citratus (DC. Stapf, Psidium guajava L., Artemisia absinthium L., Ocimum basilicum L., Plantago tomentosa Lam., Rosmarinus officinalis L., Persea americana Mill., Aloysia citrodora Palau, Sambucus australis Cham. & Schltdl., Cuphea carthagenensis (Jacq. J.F. Macbr., Petroselinum crispum (Mill. Nyman ex A.W. Hill, Ocimum selloi Benth. e Tanacetum vulgare L., nesta ordem de Valor de Uso, foram consideradas como as mais importantes para a população estudada. As famílias mais importantes foram Asphodelaceae, Caprifoliaceae, Rutaceae e Lythraceae. Para o cálculo da porcentagem a corrigida de Concordância quanto aos Usos Principais (CUPc foram consideradas como espécies principais as que apresentaram valores acima de 24%: Eugenia uniflora, Achyrocline satureioides, Psidium guajava, Cunila microcephala, Plectranthus barbatus, Citrus × aurantium, Citrus limon, Cymbopogon citratus, Punica granatum L., Sechium edule (Jacq. Sw., Sphagneticola trilobata (L. Pruski, Aloysia citrodora, Foeniculum vulgare, Plectranthus neochilus Schltr., Artemisia absinthium, Lippia alba (Mill. N.E. Br., Mikania laevigata Sch. Bip ex Baker, Aloe arborescens e Petroselinum

Extended distribution of endemic Travancore Murainagrass Ischaemum travancorense Stapf ex C.E.C. Fisch. (Poaceae to central India

Directory of Open Access Journals (Sweden)

Mandar N. Datar

2014-12-01

Full Text Available Ischaemum travancorense Stapf ex C.E.C. Fisch., an endemic species, earlier known only from the Western Ghats of Kerala, Maharashtra and Goa is reported here for the first time from central India. 

AVALIAÇÃO DE POTENCIAL DE ERVAS MEDICINAIS: CAPIM-LIMÃO (Cymbopogon citratus D.C., CHÁ VERDE (Camellia sinensis L. E HIBISCO (Hibiscus sabdariffa L. PARA OBTENÇÃO DE CHÁS SOLÚVEIS

Directory of Open Access Journals (Sweden)

Uellison dos Santos

2014-12-01

Full Text Available Este trabalho foi realizado com o objetivo de avaliar características físico-químicas de extrato aquoso e liofilizado de capim-limão (Cymbopogon citratus D.C., chá verde (Camellia sinensis L. e hibisco (Hibiscus sabdariffa L., foram realizadas analises em triplicata  de teor de sólidos solúveis, acidez titulável, pH, atividade de água e solubilidade em água. Os resultados do extrato aquoso e liofilizado para o capim limão apresentaram (SST variando de 3,0333 a 38,3066, valores de pH variando de 5,08 e 6,32 além de atividade de água características para os estados em que os extratos se encontravam, para o resultado do chá verde obtivemos teor de (SST variando de 2,81 a 45,52, pH entre 5,04 e 6,28 além de atividade de água característica. Os extratos de hibisco também apresentaram resultados satisfatórios com teor (SST entre 3,28 e 34,16, pH de 2,34 e 3,16 e atividade de água característica.  Os resultados obtidos revelaram a importância do processo de liofilização nas amostras, uma vez que houve um aumento da qualidade dos chás sem que houvesse danos na sua qualidade sensorial.

Control of Colletotrichum gloeosporioides (penz.) Sacc. In yellow passion fruit using Cymbopogon citratus essential oil

Science.gov (United States)

Anaruma, Nina Duarte; Schmidt, Flávio Luís; Duarte, Marta Cristina Teixeira; Figueira, Glyn Mara; Delarmelina, Camila; Benato, liane Aparecida; Sartoratto, Adilson

2010-01-01

The use of antibiotics in agriculture is limited when compared to their applications in human and veterinary medicine. On the other hand, the use of antimicrobials in agriculture contributes to the drug resistance of human pathogens and has stimulated the search for new antibiotics from natural products. Essential oils have been shown to exert several biological activities including antibacterial and antifungal actions. The aim of this study was to determine the activity of 28 essential oils from medicinal plants cultivated at CPMA (Medicinal and Aromatic Plants Collection), CPQBA/UNICAMP, against Colletotrichum gloeosporioides (Penz.) Sacc., the anthracnose agent in yellow passion fruit (Passiflora edulis Sims f. flavicarpa Deg), as well as evaluating their effect in the control of post-harvest decay. The oils were obtained by water-distillation using a Clevenger-type system and their minimal inhibitory concentrations (MIC) determined by the micro-dilution method. According to the results, 15 of the 28 essential oils presented activity against Colletotrichum gloeosporioides, and the following four oils presented MIC values between 0.25 and 0.3 mg/mL: Coriandrum sativum, Cymbopogon citratus, Cymbopogon flexuosus and Lippia alba. The evaluation of Cymbopogon citratus essential oil in the control of post-harvest decay in yellow passion fruit showed that the disease index of the samples treated with the essential oil did not differ (P ≤ 0.05) from that of the samples treated with fungicide. The present study shows the potential of Cymbopogon citratus essential oil in the control of the anthracnose agent in yellow passion fruit. PMID:24031465

Control of Colletotrichum gloeosporioides (penz. Sacc. In yellow passion fruit using Cymbopogon citratus essential oil

Directory of Open Access Journals (Sweden)

Nina Duarte Anaruma

2010-03-01

Full Text Available The use of antibiotics in agriculture is limited when compared to their applications in human and veterinary medicine. On the other hand, the use of antimicrobials in agriculture contributes to the drug resistance of human pathogens and has stimulated the search for new antibiotics from natural products. Essential oils have been shown to exert several biological activities including antibacterial and antifungal actions. The aim of this study was to determine the activity of 28 essential oils from medicinal plants cultivated at CPMA (Medicinal and Aromatic Plants Collection, CPQBA/UNICAMP, against Colletotrichum gloeosporioides (Penz. Sacc., the anthracnose agent in yellow passion fruit (Passiflora edulis Sims f. flavicarpa Deg, as well as evaluating their effect in the control of post-harvest decay. The oils were obtained by water-distillation using a Clevenger-type system and their minimal inhibitory concentrations (MIC determined by the micro-dilution method. According to the results, 15 of the 28 essential oils presented activity against Colletotrichum gloeosporioides, and the following four oils presented MIC values between 0.25 and 0.3 mg/mL: Coriandrum sativum, Cymbopogon citratus, Cymbopogon flexuosus and Lippia alba. The evaluation of Cymbopogon citratus essential oil in the control of post-harvest decay in yellow passion fruit showed that the disease index of the samples treated with the essential oil did not differ (P < 0.05 from that of the samples treated with fungicide. The present study shows the potential of Cymbopogon citratus essential oil in the control of the anthracnose agent in yellow passion fruit.

Essential Oil of Cymbopogon citratus on the Control of the Curvularia Leaf Spot Disease on Maize

Science.gov (United States)

Mourão, Dalmarcia de Sousa Carlos; Ferreira de Souza Pereira, Talita; de Souza, Danival José; Chagas Júnior, Aloísio Freitas; Veloso, Ronice Alves; Leão, Evelynne Urzêdo

2017-01-01

The Curvularia Leaf Spot is becoming more common due to the culture expansion and the low resistance of the cultivated genotypes in tropical regions. Thus, the objective was to evaluate the fungitoxicity of the essential oil of Cymbopogon citratus upon the phytopathogen Curvularia lunata, causative agent of the Curvularia Leaf Spot. There was realized pathogenicity tests of C. lunata in maize plants, phytotoxicity of the essential oil of C. citratus and gas chromatography attached, germination tests of the conidia, and of in vitro inhibition of C. lunata. Also, there were realized tests aiming at verifying the phytopathogen control in vivo. In the pathogenicity tests, there were verified symptoms of the disease in all of the suspensions tested on plants. It was observed that the essential oil concentrations of 7.5 µL mL−1 to 50 µL mL−1 were phytotoxic. The majoritarian chemical components of the essential oil of C. citratus were Geranial (41.46%) and Neral (32.43%). The concentrations of 5 and 7.5 µL mL−1 inhibited 100% of conidia germination. None of the concentrations evaluated effectively inhibited C. lunata mycelial growth in in vitro tests. In the preventive control, the concentration of 7.5 µL mL−1 was sufficient for the reduction of the progress of the disease, however the curative control was not efficient on the tested dosages. PMID:28930276

Avaliação in vitro da ação do óleo essencial de capim limão (Cymbopogon citratus sobre o carrapato bovino Rhipicephalus (Boophilus microplus In vitro evaluation of the action of lemon grass (Cymbopogon citratus essential oil on the cattle tick Rhipicephalus (Boophilus microplus

Directory of Open Access Journals (Sweden)

F.C.C. Santos

2012-01-01

Full Text Available O uso indiscriminado de produtos químicos no controle do carrapato bovino constitui a principal causa do gradativo aumento do número de cepas resistentes deste parasita às bases disponíveis no mercado. A utilização de óleos essenciais e extratos vegetais é uma prática antiga no controle de carrapatos, porém só recentemente tem recebido a devida atenção dos pesquisadores. O objetivo deste experimento foi avaliar a eficácia in vitro do óleo de capim limão (Cymbopogon citratus sobre fêmeas ingurgitadas de Rhipicephalus (Boophilus microplus através do exame de biocarrapaticidograma. Foram testadas seis diluições do óleo de C. citratus (1; 5; 10; 25; 50 e 100% em uma população de carrapatos resistentes a amidínicos e piretróides sintéticos. A inibição de postura foi de 3; 23; 46; 66; 46 e 46%, a eclosão larval foi de 83; 58; 31; 0; 38 e 25% e a eficácia do tratamento foi de 32; 64; 83; 100; 88 e 82%, respectivamente. O óleo de C. citratus apresentou controle parcial do carrapato R. microplus in vitro, mesmo frente a populações resistentes a produtos químicos.The indiscriminate use of chemical products to control the cattle tick is the main cause of the gradual increase in the number of strains of this parasite that are resistant to the bases currently available in the market. The use of essential oils and plant extracts is an ancient practice for tick control; however, only recently has it received due attention by researchers. The aim of this experiment was to evaluate the in vitro efficacy of lemongrass (Cymbopogon citratus essential oil on engorged females of Rhipicephalus (Boophilus microplus through immersion test. Six concentrations of Cymbopogon citratus oil (1; 5; 10; 25; 50 and 100% were tested against a tick population resistant to synthetic formamidines and pyrethroids. The inhibition of egg-laying was 3; 23; 46; 66; 46 and 46%, the hatching was 83; 58; 31; 0; 38 and 25%, and the treatment efficacy was 32

Densidades de plantio e doses de biofertilizante na produção de capim-limão Density and biofertilizer levels for lemon grass production

Directory of Open Access Journals (Sweden)

Arie F Blank

2007-09-01

Full Text Available O objetivo do trabalho foi avaliar o efeito de densidades de plantio e doses de biofertilizante comercial na produção de capim-limão (Cymbopogon citratus (D.C. Stapf. O experimento foi implantado em parcelas subdivididas com três repetições, colocando-se nas parcelas as densidades de plantio (33.333, 49.382, 55.555 e 111.111 plantas ha-1 e nas subparcelas as doses de biofertilizante (0; 20; 40 e 60 t ha-1. Foram realizadas nove colheitas em intervalos de 42 dias. Avaliou-se a sobrevivência, a altura de planta, o número de perfilhos por touceira, a massa seca por touceira e da parte aérea, o teor e o rendimento de óleo essencial. O teor de óleo essencial não foi influenciado pelas densidades de plantio e doses de biofertilizante. A densidade crescente resultou em regressões lineares crescentes para o rendimento de óleo essencial e a massa seca da parte aérea e em uma regressão linear decrescente para a massa seca por touceira. A dose de biofertilizante resultou em regressões lineares crescentes para o rendimento de óleo essencial e a massa seca por touceira e da parte aérea. A densidade de 111.111 plantas ha-1 (0,30 x 0,30 m e a dose de biofertilizante de 60 t ha-1 no primeiro ano de cultivo poderão ser recomendados para produção do capim-limão.The aim of this work was to evaluate the plant density and biofertilizer levels on lemon grass (Cymbopogom citratus (D.C. Stapf. The experiment was installed in split plot design with three replications, having plant density as plots (33,333; 49,382; 55,555 and 111,111 plants ha-1 and biofertilizer doses as sub plots (0; 20; 40; 60 t ha-1 year-1. Nine cuttings were realized using an interval of 42 days between cuttings. We evaluated survival, plant height, number of tillers per plant, dry weight per plant and of biomass yield, essential oil content and yield. The essential oil content was not influenced by the plant densities and biofertilizer doses. The crescent density resulted in

Plantas medicinais utilizadas na comunidade urbana de Muribeca, Nordeste do Brasil

Directory of Open Access Journals (Sweden)

Gisele Lopes de Oliveira

2010-06-01

Full Text Available As modernas condições de vida das comunidades urbanas comprometem o uso e transmissão do conhecimento tradicional sobre plantas medicinais. Neste trabalho foi verificada a alteração provocada por treinamento sobre plantas medicinais de um grupo de seis moradoras da comunidade de Muribeca (Jaboatão do Guararapes, PE, comparando-as com vinte moradores com conhecimento adquirido tradicionalmente. A partir de 26 entrevistas semi-estruturadas foram calculados o Fator de Consenso dos Informantes (FCI e a Importância Relativa (IR das plantas citadas pelos dois grupos. As moradoras com treinamento no uso e manipulação citaram 70 espécies, das quais Petiveria alliacea L. e Ocimum selloi Benth. apresentaram os maiores valores de IR (2,0 e 1,6; os sistemas corporais mais indicados e respectivos FCI foram: doenças infecciosas (1,0, doenças das glândulas endócrinas, da nutrição e metabolismo (0,9 e do sistema osteomuscular e tecido conjuntivo (0,89. Os moradores sem treinamento citaram 55 espécies, com maiores valores de IR para Cymbopogon citratus (DC Stapf (2,0, Lippia alba (Mill. N.E. Br. (2,0 e Mentha x villosa Huds. (1,8; os sistemas corporais mais indicados e respectivos FCI foram: doenças parasitárias (1,0, transtornos dos sistemas nervoso (0,79 e gastrintestinal (0,72. As espécies citadas são semelhantes, mas o treinamento influenciou a importância relativa e indicações de usos das plantas.Modern ways of life in urban communities have altered the use and popular transmission of knowledge about medicinal plants. This study evaluated the changes induced by training in medicinal plants in a group of female residents of the urban community of Muribeca (Jaboatão do Guararapes, Pernambuco, comparing them with other community members who have traditionally acquired knowledge. Semi-structured interviews were employed. Informant Consensus Factor (FIC and Relative Importance (RI of each species cited by the two groups were calculated

Anti-ulcerogenic Activity of Extract and Some Isolated Flavonoids from Desmostachia bipinnata (L.) Stapf

OpenAIRE

Amani, S. Awaad; Nawal H. Mohamed; Derek. J. Maitland; Gamal A. Soliman

2008-01-01

Five main flavonoid glycosides were isolated, for the first time, from the ethanol extract of Desmostachia bipinnata (L.)Stapf ( Gramineae ). They were identified as kaempferol(1), quercetin(2), quercetin-3-glucoside(3), trycin(4) and trycin-7-glucoside(5). The structure elucidation was based on UV, Electrospray ionization mass spectrometry (ESIMS), 1H and 13C NMR, proton- proton correlation spectroscopy ( 1H- 1H Cosy), distortionless enhancement by polarization transfer (DEPT), heteronuclear...

Activity of Ocimum basilicum, Ocimum canum, and Cymbopogon citratus essential oils against Plasmodium falciparum and mature-stage larvae of Anopheles funestus s.s.

Directory of Open Access Journals (Sweden)

Akono Ntonga Patrick

2014-01-01

Full Text Available The biological activities of essential oils from three plants grown in Cameroon: Ocimum basilicum, Ocimum canum, and Cymbopogon citratus were tested against Plasmodium falciparum and mature-stage larvae of Anopheles funestus. Gas chromatography and gas chromatography – mass spectrometry analyses showed that the main compounds are geranial, 1,8-cineole and linalool in C. citratus, O. canum and O. basilicum, respectively. Larvicidal tests carried out according to the protocol recommended by the World Health Organization showed that the essential oil of leaves of C. citratus is the most active against larvae of An. funestus (LC50 values = 35.5 ppm and 34.6 ppm, respectively, for larval stages III and IV after 6 h of exposure. Besides, the in vitro anti-plasmodial activity evaluated by the radioisotopic method showed that the C. citratus oil is the most active against P. falciparum, with an IC50 value of 4.2 ± 0.5 μg/mL compared with O. canum (20.6 ± 3.4 μg/mL and O. basilicum (21 ± 4.6 μg/mL. These essential oils can be recommended for the development of natural biocides for fighting the larvae of malaria vectors and for the isolation of natural products with anti-malarial activity.

In vitro antimicrobial properties of plant essential oils thymus vulgaris, cymbopogon citratus and laurus nobilis against five important foodborne pathogens Propriedades antibacterianas in vitro de óleos essenciais de thymus vulgaris, cymbopogon citratus e laurus nobilis contra cinco importantes bactérias patogênicas veiculadas por alimentos

Directory of Open Access Journals (Sweden)

Alessandra Farias Millezi

2012-03-01

Full Text Available Several essential oils of condiment and medicinal plants possess proven antimicrobial activity and are of important interest for the food industry. Therefore, the Minimum Inhibitory Concentrations (MIC of those oils should be determined for various bacteria. MIC varies according to the oil used, the major compounds, and the physiology of the bacterium under study. In the present study, the essential oils of the plants Thymus vulgaris (time, Cymbopogon citratus (lemongrass and Laurus nobilis (bay were chemically quantified, and the MIC was determined on the bacteria Staphylococcus aureus ATCC 25923, Escherichia coli ATCC 25922, Listeria monocytogenes ATCC 19117, Salmonella enterica Enteritidis S64, and Pseudomonas aeruginosa ATCC 27853. The essential oil of C. citratus demonstrated bacterial activity at all concentrations tested and against all of the bacteria tested. The majority of essential oil compounds were geranial and neral. The major constituent of T. vulgaris was 1.8-cineol and of L. nobilis was linalool, which presented lower antibacterial activity, followed by 1.8-cineol. The Gram-negative bacteria demonstrated higher resistance to the use of the essential oils tested in this study. E. coli was the least sensitive and was inhibited only by the oils of C. citratus and L. nobilis.Diversos óleos essenciais de plantas condimentares e medicinais possuem atividade antimicrobiana comprovada, sendo de grande interesse para a indústria de alimentos. Dessa forma, as Concentrações Mínimas Inibitórias (CMI desses óleos para diversas bactérias devem ser determinadas. As CMI variam de acordo com o óleo utilizado, dos compostos majoritários e da fisiologia da bactéria em estudo. Na presente pesquisa, os óleos essenciais das plantas Thymus vulgaris (tomilho, Cymbopogon citratus (capim-limão e Laurus nobilis (louro foram quantificados quimicamente e determinou-se a CMI sobre as bactérias Staphylococcus aureus ATCC 25923, Escherichia. coli

Effect of Lippia alba and Cymbopogon citratus essential oils on biofilms of Streptococcus mutans and cytotoxicity in CHO cells.

Science.gov (United States)

Tofiño-Rivera, A; Ortega-Cuadros, M; Galvis-Pareja, D; Jiménez-Rios, H; Merini, L J; Martínez-Pabón, M C

2016-12-24

Caries is a public health problem, given that it prevails in 60 to 90% of the school-age global population. Multiple factors interact in its etiology, among them dental plaque is necessary to have lactic acid producing microorganisms like Streptococcus from he Mutans group. Existing prevention and treatment measures are not totally effective and generate adverse effects, which is why it is necessary to search for complementary strategies for their management. The study sought to evaluate the eradication capacity of Streptococcus mutans biofilms and the toxicity on eukaryotic cells of Lippia alba and Cymbopogon citratus essential oils. Essential oils were extracted from plant material through steam distillation and then its chemical composition was determined. The MBEC-high-throughput (MBEC-HTP) (Innovotech, Edmonton, Alberta, Canada) assay used to determine the eradication concentration of S. mutans ATCC 35668 strain biofilms. Cytotoxicity was evaluated on CHO cells through the MTT cell proliferation assay. The major components in both oils were Geraniol and Citral; in L. alba 18.9% and 15.9%, respectively, and in C. citratus 31.3% and 26.7%. The L. alba essential oils presented eradication activity against S. mutans biofilms of 95.8% in 0.01mg/dL concentration and C. citratus essential oils showed said eradication activity of 95.4% at 0.1, 0.01mg/dL concentrations and of 93.1% in the 0.001mg/dL concentration; none of the concentrations of both essential oils showed toxicity on CHO cells during 24h. The L. alba and C. citratus essential oils showed eradication activity against S. mutans biofilms and null cytotoxicity, evidencing the need to conduct further studies that can identify their active components and in order to guide a safe use in treating and preventing dental caries. Copyright © 2016 The Authors. Published by Elsevier Ireland Ltd.. All rights reserved.

Influência da luz e da temperatura sobre a oxidação do óleo essencial de capim-limão (Cymbopogon citratus (D.C.) Stapf) Influence of light and temperature on the oxidation of the essential oil of lemongrass (Cymbopogon Citratus (D.C.) Stapf)

OpenAIRE

Luiz Gustavo de L. Guimarães; Maria das Graças Cardoso; Lidiany M. Zacaroni; Rafaela K. de Lima; Flávio A. Pimentel; Augusto R. de Morais

2008-01-01

The identification of the chemical compounds of the essential oil was performed with a gas chromatograph coupled to a mass spectrometer. The oil was left in the presence and absence of light and submitted to different temperatures to evaluate its stability. The yields of the major compounds were evaluated every fifteen days. Citral and myrcene, the major compounds of the essential oil, were degraded over time in both the presence and absence of light, but temperature only influenced the degra...

Influência da luz e da temperatura sobre a oxidação do óleo essencial de capim-limão (Cymbopogon citratus (D.C. Stapf Influence of light and temperature on the oxidation of the essential oil of lemongrass (Cymbopogon Citratus (D.C. Stapf

Directory of Open Access Journals (Sweden)

Luiz Gustavo de L. Guimarães

2008-01-01

Full Text Available The identification of the chemical compounds of the essential oil was performed with a gas chromatograph coupled to a mass spectrometer. The oil was left in the presence and absence of light and submitted to different temperatures to evaluate its stability. The yields of the major compounds were evaluated every fifteen days. Citral and myrcene, the major compounds of the essential oil, were degraded over time in both the presence and absence of light, but temperature only influenced the degradation of myrcene.

Levantamento etnobotânico de plantas medicinais na cidade de Ipameri - GO Ethnobotanical survey of medicinal plants in Ipameri City - Goiás State

Directory of Open Access Journals (Sweden)

M.R. Zucchi

2013-01-01

Full Text Available Os objetivos deste trabalho foram: identificar as espécies vegetais utilizadas com fins medicinais pela comunidade de Ipameri (Estado de Goiás; investigar as preferências com relação à produção e comercialização dessas plantas; e diagnosticar o perfil de gênero e as faixas etárias e salariais de seus usuários. Para isso, foram realizadas entrevistas estruturadas com 200 famílias da cidade e coletadas as plantas visando-se a sua correta identificação. O material foi herborizado, identificado e depositado no Herbário da Universidade Estadual de Goiás (HUEG. Das 200 famílias entrevistadas, 75 disseram não fazer uso de plantas com fins medicinais (37,5%, enquanto 125 afirmaram fazê-lo (62,5%. O grupo que utiliza relacionou 35 espécies mais empregadas: hortelã-rasteira (Mentha x villosa L., boldo-sete-dores (Plectranthus barbatus Andrews., capim-cidreira (Cymbopogon citratus (DC. Stapf., quebra-pedra (Phyllanthus niruri L., camomila (Chamomilla recutita (L. Rauschert., poejo (Mentha pulegium L., guaco (Mikania glomerata Spreng., mentrasto (Ageratum conyzoides L., alfavacão (Ocimum gratissimum L., losna (Artemisia canphorata Vill., bálsamo (Eysenhardtia platycarpa Mich., carqueja (Baccharis trimera (Less. DC., funcho (Foeniculum vulgare Mill., babosa (Aloe vera L. e malva (Althaea officinalis L.. Todas as famílias consumidoras (100% afirmaram preferir as plantas cultivadas de forma orgânica, selecionando-as através da boa aparência (68% das famílias e consumindo-as in natura (sem beneficiamento, 100%. A utilização de plantas medicinais em Ipameri é independente do sexo (54%, mulheres e 46%, homens e se estende às várias faixas etárias e também sócio-econômicas, configurando-se assim, um bom mercado consumidor.The aims of this study were: to identify the plant species used for medicinal purposes by the community at Ipameri (Goiás State; to investigate the preferences with respect to the production and marketing

In vitro antimicrobial properties of plant essential oils thymus vulgaris, cymbopogon citratus and laurus nobilis against five important foodborne pathogens

Directory of Open Access Journals (Sweden)

Alessandra Farias Millezi

2012-03-01

Full Text Available Several essential oils of condiment and medicinal plants possess proven antimicrobial activity and are of important interest for the food industry. Therefore, the Minimum Inhibitory Concentrations (MIC of those oils should be determined for various bacteria. MIC varies according to the oil used, the major compounds, and the physiology of the bacterium under study. In the present study, the essential oils of the plants Thymus vulgaris (time, Cymbopogon citratus (lemongrass and Laurus nobilis (bay were chemically quantified, and the MIC was determined on the bacteria Staphylococcus aureus ATCC 25923, Escherichia coli ATCC 25922, Listeria monocytogenes ATCC 19117, Salmonella enterica Enteritidis S64, and Pseudomonas aeruginosa ATCC 27853. The essential oil of C. citratus demonstrated bacterial activity at all concentrations tested and against all of the bacteria tested. The majority of essential oil compounds were geranial and neral. The major constituent of T. vulgaris was 1.8-cineol and of L. nobilis was linalool, which presented lower antibacterial activity, followed by 1.8-cineol. The Gram-negative bacteria demonstrated higher resistance to the use of the essential oils tested in this study. E. coli was the least sensitive and was inhibited only by the oils of C. citratus and L. nobilis.

Cymbopogon citratus-synthesized gold nanoparticles boost the predation efficiency of copepod Mesocyclops aspericornis against malaria and dengue mosquitoes.

Science.gov (United States)

Murugan, Kadarkarai; Benelli, Giovanni; Panneerselvam, Chellasamy; Subramaniam, Jayapal; Jeyalalitha, Tirupathi; Dinesh, Devakumar; Nicoletti, Marcello; Hwang, Jiang-Shiou; Suresh, Udaiyan; Madhiyazhagan, Pari

2015-06-01

Plant-borne compounds can be employed to synthesize mosquitocidal nanoparticles that are effective at low doses. However, how they affect the activity of mosquito predators in the aquatic environment is unknown. In this study, we synthesized gold nanoparticles (AuN) using the leaf extract of Cymbopogon citratus, which acted as a reducing and capping agent. AuN were characterized by a variety of biophysical methods and sorted for size in order to confirm structural integrity. C. citratus extract and biosynthesized AuN were tested against larvae and pupae of the malaria vector Anopheles stephensi and the dengue vector Aedes aegypti. LC₅₀ of C. citratus extract ranged from 219.32 ppm to 471.36 ppm. LC₅₀ of AuN ranged from 18.80 ppm to 41.52 ppm. In laboratory, the predatory efficiency of the cyclopoid crustacean Mesocyclops aspericornis against A. stephensi larvae was 26.8% (larva I) and 17% (larva II), while against A. aegypti was 56% (I) and 35.1% (II). Predation against late-instar larvae was minimal. In AuN-contaminated environment,predation efficiency against A. stephensi was 45.6% (I) and 26.7% (II), while against A. aegypti was 77.3% (I) and 51.6% (II). Overall, low doses of AuN may help to boost the control of Anopheles and Aedes larval populations in copepod-based control programs. Copyright © 2015 Elsevier Inc. All rights reserved.

Composição química e atividade in vitro de três óleos essenciais sobre Colletotrichum gloeosporioides do maracujazeiro

Directory of Open Access Journals (Sweden)

C.F. Aquino

2014-01-01

Full Text Available Objetivou-se avaliar a ação de diferentes concentrações de óleos essenciais de três plantas medicinais sobre o crescimento micelial, a produção e a germinação de conídios de Colletotrichum gloeosporioides (Penz.. Utilizou-se os óleos essenciais de Lippia sidoides Cham., Cymbopogon citratus (DC Stapf. e Ocimum gratissimum L. em cinco concentrações (0 µL mL-1, 1 µL mL-1, 3 µL mL-1, 5 µL mL-1 e 7 µL mL-1 com 4 repetições no delineamento inteiramente casualizado, em esquema fatorial 5x3. Os óleos foram analisados por cromatografia gasosa acoplada com espectrometria de massas. Para todas as características verificou-se efeito significativo da interação "Óleo" versus "Concentração". O óleo essencial de C. citratus proporcionou a maior inibição do crescimento micelial em todas as concentrações testadas. Os outros óleos não se diferenciaram, exceto a partir da concentração de 5 µL mL-1, onde o óleo de L. sidoides foi superior ao óleo de O. gratissimum. Na produção e germinação de conídios, o óleo de C. citratus, foi superior aos óleos de L. sidoides e de O. gratissimum nas concentrações de 1 µL mL-1 e 3 µL mL-1, inibindo completamente a produção e germinação a partir da concentração de 3 µL mL-1. As concentrações influenciam em todas as variáveis, ajustando-se à equação do modelo linear. Observa-se o decréscimo nessas, à medida em que se aumentam as concentrações dos óleos testados. Os óleos essenciais testados possuem efeito fungitóxico e fungistático.

Food preservative potential of essential oils and fractions from Cymbopogon citratus, Ocimum gratissimum and Thymus vulgaris against mycotoxigenic fungi

DEFF Research Database (Denmark)

Nguefack, J.; Dongmo, J. B. Lekagne; Dakole, C. D.

2009-01-01

The food preservative potential of essential oils from three aromatic plants Cymbopogon citratus, Ocimum gratissimum and Thymus vulgaris and their fractions was investigated against two mycotoxigenic strains each of Aspergillus ochraceus, Penicillium expansum and P. verrucosum. The fungicidal...

Effects of essential oil from Cymbopogon citratus leaves and its susceptibility on the quality of fresh orange juice during storage

Directory of Open Access Journals (Sweden)

Euloge Adjou

2017-03-01

Full Text Available The present study aims to evaluate the effect of essential oil (EO from Cymbopogon citratus leaves against the spoilage flora of fresh orange juice. Thus, the EO was extracted by hydrodistillation from fresh leaves of Cymbopogon citratus collected in southern Benin and its chemical composition was determined by gas chromatography, coupled to mass spectrometry (GC/MS. Orange samples were collected from large production areas of South and Central Benin and juices were extracted by mechanical pressing. After identification of spoilage flora of fresh orange juice, antimicrobial tests were carried out with the EO of Cymbopogon citratus to evaluate its antimicrobial activity on spoilage flora of fresh orange juice.  Results indicate that the spoilage flora of fresh orange juice is mainly composed of fungi belonging to the genera of Cladosporium, Penicillium and Fusarium. Bacteria such as Enterobacter cloacae and Enterobacter aerogenes were also identified in some samples. The major compounds identified in the EO by GC/MS are Neral (33.0% and geranial (41.3% with a predominance of oxygenated monoterpenes (85.5%. Antimicrobial tests have revealed a high antibacterial activity of the EO, with minimum bactericidal concentrations (MBC between 0.1 and 0.15 μL.mL-1. Antifungal tests revealed that fungi are also susceptible to this EO with minimum fungicidal concentration (MFC between 0.15 and 0.25 μL.mL-1. Results obtained during the evaluation of the physicochemical characteristics of the orange juice stored by adding EO, indicated a significant decrease in the pH and vitamin C content. However, with EO concentration of 0.250 μL.mL-1, the pH of stored juice was 6.4 ± 0.1 after 15 days of preservation, with a best vitamin C content of 28.06 ± 0.03 mg / 100mL. The EO of Cymbopogon citratus, with high antimicrobial activity, could be used as an alternative in the preservation of fruit juices, replacing antimicrobials from chemical synthesis.

Ação antioxidante de chás e condimentos de grande consumo no Brasil

Directory of Open Access Journals (Sweden)

Selene M. de Morais

Full Text Available Antioxidantes são compostos que atuam inibindo e/ou diminuindo os efeitos desencadeados pelos radicais livres e compostos oxidantes. Os chás são bebidas populares e fontes significativas de compostos fenólicos, sendo considerados importantes integrantes das dietas devido às suas propriedades antioxidantes. O presente trabalho teve como objetivo avaliar a ação antioxidante de uma variedade de chás e condimentos mais consumidos no Brasil. Os chás analisados foram das plantas: Pneumus boldus Mold., Matricaria recutita L., Cymbopogon citratus (DC Stapf, Baccharis trimera (Less. DC, Camelia sinensis (L O. Kuntze (fermentado, Camelia sinensis (não-fermentado, Lippia alba N.E. Brown,Mentha arvensis L., e Pyrus malus L. Os condimentos analisados foram: Eugenia aromatica Baill, Cinnamonum zeylanicum Blume, Laurus nobilis L. e Origanum vulgare L. O método utilizado para avaliar a ação antioxidante foi o da atividade seqüestradora de radicais livres DPPH em solução metanólica. Todas as amostras analisadas demonstraram atividade em suas diferentes concentrações. Camelia sinensis (não-fermentada foi a mais ativa com CI50= 0,14 mg/mL, cujos principais compostos antioxidantes são epigalocatequinas. Os condimentos mais ativos foram Cinnamonum zeylanicum (CI50 = 0,37 mg/mL, Eugenia aromatica Baill (CI50 = 0,46 mg/mL e Laurus nobilis (CI50 = 0,76 mg/mL, cujo principal antioxidante relatado foi o eugenol.

Potential antioxidant and cytoprotective effects of essential oil extracted from Cymbopogon citratus on OxLDL and H2O2 LDL induced Human Peripheral Blood Mononuclear Cells (PBMC

Directory of Open Access Journals (Sweden)

Jamuna S.

2017-06-01

Full Text Available Cymbopogon citratus (lemon grass is commonly used in traditional folk medicine. The essential oil extracted from C. citratus has been reported as a potential anti-oxidant and anti-inflammatory agent. This study has been designed to explore the protective effect of C. citratus (lemon grass against modified LDL (OxLDL and H2O2 LDL induced cytotoxicity in Peripheral Blood Mononuclear Cells (PBMC. The essential oil extracted from C. citratus (EOC was subjected to FT-IR spectroscopic analysis for the identification of functional groups. In vitro antioxidant assays were carried out to assess the electron donating capability of EOC as compared with a known standard L-ascorbic acid. The cytoprotective effects of EOC were determined in PBMC induced with modified LDL. Spectra obtained from FT-IR analysis showed the presence of functional groups in EOC such as H-bonded, OH stretching, NH stretching, aldehydeCH stretching, aldehyde/ketoneCO stretching, CC-stretching, CH3 bending, CH in plane bending. EOC has greater antioxidant property when compared with the standard L-ascorbic acid. EOC at all test concentrations demonstrated free radical scavenging activity and cytoprotective effect when challenged against modified LDL in PBMC. The above results show EOC as a promising antioxidant and cytoprotective agent.

Bioatividade de extratos hidroalcoólicos de Cymbopogon citratus (DC. Stapf. sobre picão-preto (Bidens pilosa L. e alface (Lactuca sativa L. Bioactivity of hydroalcoholic extracts of Cymbopogon citratus (DC. Stapf. on germination and early growth of beggartick (Bidens pilosa L. and lettuce (Lactuca sativa L.

Directory of Open Access Journals (Sweden)

L.L. Lousada

2012-01-01

Full Text Available Este trabalho visou avaliar a bioatividade de extratos hidroalcoólicos de capim-limão sobre germinação e crescimento inicial da planta daninha picão-preto (Bidens pilosa L. e da planta teste alface (Lactuca sativa L.. A partir de maceração hidroalcoólica de folhas secas e rasuradas (127,46 g de capim-limão em 1L de álcool de cereais (70%, foram preparados os tratamentos como extratos hidroalcoólicos (HA pela diluição (v/v do macerado filtrado em água deionizada na proporção 1:1 (HA1:1 e 1:2 (HA1:2; dos quais foram obtidos os respectivos extratos secos (ES, a partir da evaporação da fase líquida de duas alíquotas de 50 mL de cada extrato HA, que após re-suspendidas em igual volume de água, sendo uma autoclavada (1 atm por 15 minutos, resultando nos extratos secos de HA1:1 e HA1:2 autoclavados (ES1:1A e ES1:2A e nos extratos secos não autoclavados (ES1:1 e ES1:2; e água (AG como controle. No primeiro dia dos bioensaios, foram aplicados 2 mL dos tratamentos, em DIC, com cinco repetições. Avaliou-se a porcentagem de germinação (G%, Índice de Velocidade de Germinação (IVG, altura da parte aérea (AA e comprimento de radícula (CR de aquênios (25 de picão-preto e de alface distribuídos em placas de Petri e mantidos em câmara de germinação (B.O.D. por duas semanas. Os extratos HA1:1 e HA1:2 inibiram a G%, AA e CR das duas espécies. Todos os extratos secos reduziram a G%, IVG e o CR da alface. Para o picão preto, apenas o extrato ES1:1 reduziu a G% e o IVG foi reduzido por todos os extratos, a exceção do ES1:1A, mas nenhum extrato influenciou o crescimento inicial desta espécie.This study aimed to evaluate the bioactivity of hydroalcoholic extract of lemongrass on the germination and early growth of the weed plant beggartick (Bidens pilosa L. and the test plant lettuce (Lactuca sativa L.. From the hydroalcoholic maceration of dried and cut leaves of lemon grass (127.46 g in 1 L grain alcohol (70%, the following treatments were prepared, hydro-alcoholic (HA extracts by diluting (v/v the macerate in deionized water at 1:1 (HA1:1 and 1:2 (HA1:2 proportions, obtaining the respective dried extracts (DE from the evaporation of the liquid phase of two 50-mL aliquots of each HA extract; after resuspension in the same water volume, one aliquot was autoclaved (1 atm for 15 minutes resulting in HA1:1 and HA1:2 dried autoclaved extracts (DE1:1A and DE1:2A and in dried non-autoclaved extracts (ES1:1 and ES1:2, and water as control. On the first day of bioassays, 2mL of treatments were applied, in completely randomized design, with 5 replicates. Germination percentage (G%, Germination Speed Index (GSI, shoot height (SH and radicle length (RL of achenes (25 of beggartick and lettuce were evaluated after having been distributed in Petri dishes and kept in a germination chamber (B.O.D. for two weeks. HA1:1 and HA1:2 extracts inhibited G%, SH and RL of both species. All dried extracts reduced G%, GSI and CR of lettuce. For beggartick, only ES1:1 extract reduced G% while GSI was reduced in all extracts, except ES1:1A, but no extract influenced the early growth of this species.

Antibiotic Properties of the endophytic Streptomyces Spp. Isolated from the Leaves of Myanmar Medicinal Plants

International Nuclear Information System (INIS)

Aye Pe; Mar Mar Nyein; Win Maung

2002-02-01

Three medicinal plants of Myanmar are selected in the study of endophytic microorganisms and are taxonomically classified and identified to be Sa-ba-lin (Cymbopogon citratus Stapf.), Shazaungtinga- neah (Euphorbia splendens Bojer. ex Hooker) and Ma-shaw (Sauropus grandifolius Pax. and Hoffm.). The screening of endophytic microorganisms is performed according to the ISP method (International Streptomyces Projects 1993). The morphological and physicochemical properties of isolated strains are studied and identified to be the Genus Streptomyces. The test of apparent antimicrobial activity of isolated Streptomyces is done on 18 strains of pathogenic bacteria. It is found that the isolated endophytic Sireptomyces showed the significant antibacterial activity on most of the test organisms. (author)

Essential oil of Cymbopogon citratus (lemongrass) and geraniol, but not citral, promote gastric healing activity in mice.

Science.gov (United States)

Venzon, Larissa; Mariano, Luísa Nathália Bolda; Somensi, Lincon Bordignon; Boeing, Thaise; de Souza, Priscila; Wagner, Theodoro Marcel; Andrade, Sérgio Faloni de; Nesello, Luciane Angela Nottar; da Silva, Luísa Mota

2018-02-01

Cymbopogon citratus, popularly known as lemongrass, is used for the treatment of gastric, nervous and hypertensive disorders, in addition to its use in the food and pharmaceutical industries. This study evaluated the gastroprotective and gastric healing effect of essential oil of C. citratus (EOCC), citral and geraniol at doses of 1-100 mg/kg (p.o) on acute ethanol-induced ulcer and chronic acetic acid-induced ulcer. Histological and histochemical evaluation was also performed, as well as the in vitro evaluation of the effects of these phytochemicals on H + /K + -ATPase activity. In the ethanol-induced gastric ulcer, the minimum effective oral dose of EOCC, citral and geraniol were 10, 100 and 3 mg/kg, reducing the ulcer area by 51.67%, 96.57% and 55.74%, respectively, compared to vehicle group (25.82 ± 3.59 mm 2 ). Moreover, EOCC (10 mg/kg, p.o) and geraniol (3 mg/kg), but not citral (100 mg/kg), accelerated the gastric healing process by 34.52 and 80.57%, compared to acetic-acid ulcerated group treated with vehicle (36.04 ± 1.03 mm 2 ). These healing effects were confirmed histologically by the contraction of the ulcer base and by the enhancement on mucin staining in slices of ulcer site from mice treated with EOCC or geraniol. Interestingly, EOCC and citral at 100 μg/ml inhibited the H + / K + -ATPase activity by 28.26% and 44.36%, whereas geraniol did not change this parameter. Together, these findings confirm the gastroprotective and healing gastric ulcer effects of essential oil from aerial parts of C. citratus and added the information that geraniol, but not citral, promotes healing effects on installed ulcers. Copyright © 2017 Elsevier Masson SAS. All rights reserved.

Cymbopogon citratus and NaNO2 Behaviours in 3.5% NaCl-Immersed Steel-Reinforced Concrete: Implications for Eco-Friendly Corrosion Inhibitor Applications for Steel in Concrete

Directory of Open Access Journals (Sweden)

Joshua Olusegun Okeniyi

2018-01-01

Full Text Available This paper studies behaviours of Cymbopogon citratus leaf-extract and NaNO2, used as equal-mass admixture models, in 3.5% NaCl-immersed steel-reinforced concrete by nondestructive electrochemical methods and by compressive-strength improvement/reduction effects. Corrosion-rate, corrosion-current, and corrosion-potential constitute electrochemical test-techniques while compressive-strength effect investigations followed ASTM C29 and ASTM C33, in experiments using positive-controls for the electrochemical and compressive-strength studies. Analyses of the different electrochemical test-results mostly portrayed agreements on reinforcing-steel anticorrosion effects by the concentrations of natural plant and of chemical admixtures in the saline/marine simulating-environment and in the distilled H2O (electrochemical positive control of steel-reinforced concrete immersions. These indicated that little amount (0.0833% cement for concrete-mixing of Cymbopogon citratus leaf-extract was required for optimal inhibition efficiency, η = 99.35%, on reinforcing-steel corrosion, in the study. Results of compressive-strength change factor also indicated that the 0.0833% Cymbopogon citratus concentration outperformed NaNO2 admixture concentrations also in compressive-strength improvement effects on the NaCl-immersed steel-reinforced concrete. These established implications, from the study, on the suitability of the eco-friendly Cymbopogon citratus leaf-extract for replacing the also highly effective NaNO2 inhibitor of steel-in-concrete corrosion in concrete designed for the saline/marine service-environment.

Combined Effect of Gamma Radiation and Cymbopogon Citratus L. Essential Oil on the Growth and Morphogenesis of Penicillium Digitatum Sacc. The Causal Agent of Green Mold of Citrus Fruits

International Nuclear Information System (INIS)

SalemM, E.A.

2011-01-01

The growth of Penicillium digitatum Sacc. was completely inhibited by using 2.5 l/ml or 3 l/ml of Cymbopogon citratus essential oil applied by fumigation or contact method on Czapek's medium, respectively. Two kGy gamma radiation treatment decreased the severity of infection of green rot caused by P. digitatum from 100% to 9.8% after 2 weeks of storage. Also, pre-treatment of orange fruits by 2.5 l/ml C. citratus before 2 kGy irradiation prevented infection by green rot for 21 days and decreased the severity of infection to 9.5% for 28 days of storage at 20 C. The microscopic observation using scanning electron microscope (SEM) was carried out to study the ultra structure modifications of P. digitatum after treatment. The mycelium of the fungus fumigated with the sub-lethal dose of C. citratus showed large alteration and distortion in hyphal and spores morphology.

Cymbopogon citratus essential oil: effect on polymicrobial caries-related biofilm with low cytotoxicity.

Science.gov (United States)

Oliveira, Maria Alcionéia Carvalho de; Borges, Aline Chiodi; Brighenti, Fernanda Lourenção; Salvador, Marcos José; Gontijo, Aline Vidal Lacerda; Koga-Ito, Cristiane Yumi

2017-11-06

The objective of this study was to evaluate the effects of Cymbopogon citratus essential oil and its main compound (citral) against primary dental colonizers and caries-related species. Chemical characterization of the essential oil was performed by gas chromatography/mass spectroscopy (GC/MS), and the main compound was determined. Antimicrobial activity was tested against Actinomyces naeslundii, Lactobacillus acidophilus, S. gordonii, S. mitis, S. mutans, S. sanguinis and S. sobrinus. Minimum inhibitory and bactericide concentrations were determined by broth microdilution assay for streptococci and lactobacilli reference, and for clinical strains. The effect of the essential oil on bacterial adhesion and biofilm formation/disruption was investigated. Negative (without treatment) and positive controls (chlorhexidine) were used. The effect of citral on preformed biofilm was also tested using the same methodology. Monospecies and microcosm biofilms were tested. ANOVA or Kruskal-Wallis tests were used (α=0.05). Cytotoxicity of the essential oil to human keratinocytes was performed by MTT assay. GC/MS demonstrated one major component (citral). The essential oil showed an inhibitory effect on all tested bacterial species, including S. mutans and L. acidophilus. Essential oil of C. citratus (10X MIC) reduced the number of viable cells of lactobacilli and streptococci biofilms (p essential oil inhibited adhesion of caries-related polymicrobial biofilm to dental enamel (p essential oil showed low cytotoxicity to human keratinocytes. Based on these findings, this study can contribute to the development of new formulations for products like mouthwash, against dental biofilms.

Scaling-up the biomass production of Cymbopogon citratus L. in temporary immersion system

Directory of Open Access Journals (Sweden)

Elisa Quiala

2014-04-01

Full Text Available Shoot-tips, collected from greenhouse-grown plants of Cymbopogon citratus L. (lemmon grass, were incubated on a semi-solid Murashige and Skoog (MS medium with 30% (w/v sucrose, and supplemented with 0.89 µM 6-benzyladenine (BA. After three weeks of culture shoots were individualized and then inoculated in 10 litres temporary immersion system (TIS containing 3 litres of the same basal MS liquid medium. The effects of three immersion frequency (immersion every 12, 6 and 4 hours on the production of biomass were studied. Three inoculum densities (forty, fifty and sixty shoots/TIS were also tested. The biomass growth was inûuenced by the immersion frequency. The highest proliferation rate (17.3 shoots/explants and the plant length (45.2 cm were obtained in plants immersed every 4 h. Also, the fresh and dry biomass weight (153.4 gFW and 24.8 gDW, respectively were higher in this treatment. The maximum biomass accumulation (185.2 gFW and 35.2 gDW was achieved after 30 days of culture when an inoculum density of 60 explants per TIS was used. For the first time, biomass of C. citratus has been produced in10 litres TIS. These results represent the first step in the scaling-up the biomass production of this medicinal plant in large temporary immersion bioreactors. Key words: automation, biomass growth, lemmon grass medicinal plant, tissue culture

Phytoremediation of metals using lemongrass (Cymbopogon citratus (D.C.) Stapf.) grown under different levels of red mud in soil amended with biowastes.

Science.gov (United States)

Gautam, Meenu; Pandey, Divya; Agrawal, Madhoolika

2017-06-03

Due to hostile condition of red mud (RM), its utilization for vegetation is restricted. Therefore, RM with biowastes as soil amendment may offer suitable combination to support plant growth with reduced risk of metal toxicity. To evaluate the effects of RM on soil properties, plant growth performance, and metal accumulation in lemongrass, a study was conducted using different RM concentrations (0, 5, 10, and 15% w/w) in soil amended with biowastes [cow dung manure (CD) or sewage-sludge (SS)]. Application of RM in soil with biowastes improved organic matter and nutrient contents and caused reduction in phytoavailable metal contents. Total plant biomass was increased under all treatments, maximally at 5% RM in soil with SS (91.4%) and CD (51.7%) compared to that in control (no RM and biowastes). Lemongrass acted as a potential metal-tolerant plant as its metal tolerance index is >100%. Based on translocation and bioconcentration factors, lemongrass acted as a potential phytostabilizer of Fe, Mn, and Cu in roots and was found efficient in translocation of Al, Zn, Cd, Pb, Cr, As, and Ni from roots to shoot. The study suggests that 5% RM with biowastes preferably SS may be used to enhance phytoremediation potential of lemongrass.

Ação e caracterização química de óleos essenciais no manejo da antracnose do maracujá Chemical characterization and action of essential oils in the management of anthracnose on passion fruits

Directory of Open Access Journals (Sweden)

César Fernandes Aquino

2012-12-01

Full Text Available Objetivou-se avaliar dois métodos de inoculação de Colletotrichum gloeosporioides em maracujá, testar a patogenicidade de diferentes isolados, o efeito fungitóxico e a composição química dos óleos essenciais das espécies medicinais alecrim-pimenta (Lippia sidoides Cham., capim-santo [Cymbopogon citratus (D. C. Stapf.], alfavaca-cravo (Ocimum gratissimum L., no controle da antracnose [Colletotrichum gloeosporioides (Penz.], associado ao estádio de maturação de frutos de maracujazeiro-amarelo. Avaliaram-se três experimentos, onde se testou a patogenicidade de seis isolados do fungo em delineamento inteiramente casualizado, com seis repetições, outro com o mesmo delineamento em esquema fatorial 2x2 (suspensão de conídios e disco de micélio e frutos (verdes e maduros, com seis repetições. No tratamento com frutos, utilizou-se o delineamento inteiramente casualizado, em esquema fatorial 5x3+1, sendo cinco concentrações (0; 2; 4; 6 e 8µL mL-1 e três espécies medicinais, mais o tebuconazol, com cinco repetições. Fez-se a caracterização química dos óleos por cromatografia gasosa, com espectrometria de massas. Todos os isolados foram patogênicos. Os frutos maduros apresentaram maior diâmetro das lesões, quando inoculados com suspensão de conídios. O óleo de C. citratus proporcionou o menor diâmetro das lesões nos frutos, até a concentração de 6 µL mL-1. Na concentração de 8 µL mL-1, todos os óleos inibiram o desenvolvimento do fungo. O timol (30,24%, o citral (77,74% e o eugenol (92,89% foram componentes majoritários em L. sidoides, C. citratus e O. gratissimum, respectivamente.The objective was to evaluate two methods of inoculation of Colletotrichum gloeosporioides on passion fruit, test the pathogenicity of different isolates, fungitoxic effect and the chemical composition of the essential oils from medicinal plants Lippia sidoides (Cham., Cymbopogon citratus (D. C. Stapf. and Ocimum gratissimum (L., in

A reversed-phase compatible thin-layer chromatography autography for the detection of acetylcholinesterase inhibitors.

Science.gov (United States)

Ramallo, I Ayelen; García, Paula; Furlan, Ricardo L E

2015-11-01

A dual readout autographic assay to detect acetylcholinesterase inhibitors present in complex matrices adsorbed on reversed-phase or normal-phase thin-layer chromatography plates is described. Enzyme gel entrapment with an amphiphilic copolymer was used for assay development. The effects of substrate and enzyme concentrations, pH, incubation time, and incubation temperature on the sensitivity and the detection limit of the assay were evaluated. Experimental design and response surface methodology were used to optimize conditions with a minimum number of experiments. The assay allowed the detection of 0.01% w/w of physostigmine in both a spiked Sonchus oleraceus L. extract chromatographed on normal phase and a spiked Pimenta racemosa (Mill.) J.W. Moore leaf essential oil chromatographed on reversed phase. Finally, the reversed-phase thin-layer chromatography assay was applied to reveal the presence of an inhibitor in the Cymbopogon citratus (DC.) Stapf essential oil. The developed assay is able to detect acetylcholinesterase inhibitors present in complex matrixes that were chromatographed in normal phase or reversed-phase thin-layer chromatography. The detection limit for physostigmine on both normal and reversed phase was of 1×10(-4) μg. The results can be read by a change in color and/or a change in fluorescence. © 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Dengue antiviral activity of polar extract from Melochia umbellata (Houtt) Stapf var. Visenia

Science.gov (United States)

Hariani Soekamto, Nunuk; Liong, S.; Fauziah, S.; Wahid, I.; Firdaus; Taba, P.; Ahmad, F.

2018-03-01

A research on the dengue antiviral activity test on the polar bark extract of M. umbelatta (Houtt.) Stapf var. Vicenia have been done to determine the relation to its activity againts brine shrimp Artemia salina. The bark was extracted by maceration with n-hexane, chloroform, and ethylacetate. The activity of the ethyl acetate extract was then tested against A. salina and dengue virus. It was found that the ethyl acetate extract was active to A. salina with the LC50 value of 101.66 μg/mL and also very active to dengue virus with the IC50 value of 1.67μg/mL. It is clear that the toxicity to brine shrimp A. salina has a positive correlation with the dengue anti virus.

The main constituents of Tulipa systola Stapf. roots and flowers; their antioxidant activities.

Science.gov (United States)

Ibrahim, Mohammed Farhad; Hussain, Faiq Hama Saeed; Zanoni, Giuseppe; Vidari, Giovanni

2017-09-01

People living on the mountains of the Kurdistan Region, Iraq make a large use of herbs in the local traditional medicine. Among them, Tulipa systola, which grows under and between rocks, is very popular as an anti-inflammatory remedy and pain-relief. The phytochemical study of an ethanolic extract obtained from flowers and roots of Tulip (T systola Stapf.) afforded three compounds, identified as (+)-1-O-E-feruloyl-3-O-E-p-coumaroylglycerol (1), (+)-6-tuliposide A (2), and (-)-kaempferol-3-O-rutinoside (3). The significant radical scavenging and antioxidant activity of the isolated compounds were evaluated on three tests, by determining the DPPH free radical scavenging activity, the total antioxidant activity and the hydrogen peroxide scavenging activity. Tuliposide A shows potent allergenic activity.

Effect of essential oils of medicinal plants on leaf blotch in Tanzania grass Efeito de óleos essenciais de plantas medicinais sobre a helmintosporiose do capim Tanzânia

Directory of Open Access Journals (Sweden)

Gil Rodrigues dos Santos

2013-09-01

Full Text Available Leaf spots caused by phyto-pathogenic fungi, can reduce the production of forage plants. The essential oils of medicinal plants have antimicrobial potential. The objective here was to evaluate the fungotoxicity in vitro of the essential oils of lemongrass (Cymbopogon citratus (DC. Stapf (Poaceae, citronella (Cymbopogon nardus (L. Rendle (Poaceae, lemon balm (Lippia alba (Mill. NE Br ex Britton & P. Wilson (Verbenaceae and peppermint (Mentha piperita L. (Lamiaceae on the fungus Helminthosporium sp. and the in vivo effect of these oils and of commercial neem oil (Azadirachta indica A. Juss. (Meliaceae on leaf blotch in Panicum maximum Jacq. cv. Tanzania-1. The mycelial growth of the fungus was evaluated over five periods (2; 4; 6; 8 and 10 days from incubation and with five concentrations of essential oils (C1 = 250 ppm; C2 = 500 ppm; C3 = 750 ppm; C4 = 1,000 ppm e C5 = 1,250 ppm. As an alternative control, the preventative and curative effect on leaf blotch of five oil-based treatments were evaluated: lemongrass, citronella, lemon balm, peppermint and neem in four concentrations (2,500; 5,000; 7,500 and 10,000 ppm. The essential oils of lemongrass and citronella were the most effective in reducing mycelial growth of Helminthosporium sp. With the essential oil of lemongrass, the pathogen presented the highest growth concentration (1.250 ppm. The results obtained showed that all the essential oils and concentrations tested presented a preventive and curative effect, reducing the severity of leaf blotch.Manchas foliares, causadas por fungos fitopatogênicos, podem reduzir a produção de forrageiras. Óleos essenciais de plantas medicinais apresentam potencial antimicrobiano. Objetivou-se avaliar a fungitoxicidade in vitro dos óleos essenciais de capim-limão (Cymbopogon citratus (DC. Stapf (Poaceae, citronela (Cymbopogon nardus (L. Rendle (Poaceae, erva-cidreira (Lippia alba (Mill. N.E. Br. ex Britton & P. Wilson (Verbenaceae e hortel

Estudo prospectivo da cadeia produtiva do capim-limão: estado do Paraná

Directory of Open Access Journals (Sweden)

Eliane Carneiro Gomes

2004-12-01

Full Text Available A aplicação de prospectiva para cadeias produtivas engloba várias etapas como a segmentação de cada elo, a análise do ambiente institucional e organizacional que envolve a cadeia, a identificação das necessidades e aspirações de cada segmento da cadeia e dos fatores críticos para a melhoria do desempenho. Desta forma, considerando a importância econômica da produção, industrialização e comercialização do capim-limão, Cymbopogon citratus (D.C. Stapf, e visando uma ação integrada do setor agrícola envolvido, este trabalho propõe o estudo prospectivo da cadeia produtiva desta espécie no estado do Paraná, identificando também fatores e condicionantes de qualidade em cada segmento desta cadeia. Para isto, o presente estudo apresenta o panorama da produção agroindustrial e da comunidade produtora agrícola paranaense de capim-limão; identifica e caracteriza os outros segmentos que integram a respectiva cadeia produtiva no Paraná e, por fim, identifica e analisa os principais gargalos, elos faltantes e pontos de estrangulamento. Evidenciaram-se como principais componentes da cadeia produtiva: a unidade produtiva, a agroindústria, a indústria (alimentícia, farmacêutica e química e o mercado consumidor interno (atacadista e varejista e externo. Com esse estudo prospectivo, espera-se contribuir para a implementação de medidas político-organizacionais, entre os agentes econômicos dos setores público e privado, que fazem parte da cadeia produtiva do capim-limão, possibilitando-lhes desenvolver estratégias que aumentem a competitividade e conduzam à expansão do mercado.The application of a prospective study to productive chains incorporates several stages like the segmentation of each link, the analysis of institutional and organizational environments to include the chain, the identification of necessities and aspirations of each chain segment and the critical factors for the improvement of performance. Thus

Cymbopogon citratus essential oil: effect on polymicrobial caries-related biofilm with low cytotoxicity

Directory of Open Access Journals (Sweden)

Maria Alcionéia Carvalho de OLIVEIRA

2017-11-01

Full Text Available Abstract The objective of this study was to evaluate the effects of Cymbopogon citratus essential oil and its main compound (citral against primary dental colonizers and caries-related species. Chemical characterization of the essential oil was performed by gas chromatography/mass spectroscopy (GC/MS, and the main compound was determined. Antimicrobial activity was tested against Actinomyces naeslundii, Lactobacillus acidophilus, S. gordonii, S. mitis, S. mutans, S. sanguinis and S. sobrinus. Minimum inhibitory and bactericide concentrations were determined by broth microdilution assay for streptococci and lactobacilli reference, and for clinical strains. The effect of the essential oil on bacterial adhesion and biofilm formation/disruption was investigated. Negative (without treatment and positive controls (chlorhexidine were used. The effect of citral on preformed biofilm was also tested using the same methodology. Monospecies and microcosm biofilms were tested. ANOVA or Kruskal-Wallis tests were used (α=0.05. Cytotoxicity of the essential oil to human keratinocytes was performed by MTT assay. GC/MS demonstrated one major component (citral. The essential oil showed an inhibitory effect on all tested bacterial species, including S. mutans and L. acidophilus. Essential oil of C. citratus (10X MIC reduced the number of viable cells of lactobacilli and streptococci biofilms (p < 0.05. The essential oil inhibited adhesion of caries-related polymicrobial biofilm to dental enamel (p < 0.01. Citral significantly reduced the number of viable cells of streptococci biofilm (p < 0.001. The essential oil showed low cytotoxicity to human keratinocytes. Based on these findings, this study can contribute to the development of new formulations for products like mouthwash, against dental biofilms.

Fungicidal and anti-aflatoxigenic effects of the essential oil of Cymbopogon citratus (DC.) Stapf. (lemongrass) against Aspergillus flavus Link. isolated from stored rice.

Science.gov (United States)

Paranagama, P A; Abeysekera, K H T; Abeywickrama, K; Nugaliyadde, L

2003-01-01

To develop a natural fungicide against aflatoxigenic fungi, to protect stored rice, using the essential oil of lemongrass. Aspergillus flavus Link. was isolated from stored rice and identified as an aflatoxigenic strain. Lemongrass oil was tested against A. flavus and the test oil was fungistatic and fungicidal against the test pathogen at 0.6 and 1.0 mg ml(-1), respectively. Aflatoxin production was completely inhibited at 0.1 mg ml(-1). The results obtained from the thin layer chromatographic bioassay and gas chromatography indicated citral a and b as the fungicidal constituents in lemongrass oil. During the fumigant toxicity assay of lemongrass oil, the sporulation and the mycelial growth of the test pathogen were inhibited at the concentrations of 2.80 and 3.46 mg ml(-1), respectively. Lemongrass oil could be used to manage aflatoxin formation and fungal growth of A. flavus in stored rice. Currently, fungicides are not used to control fungal pests or mycotoxin production on stored rice. Rice treated with the essential oil of lemongrass could be used to manage fungal pests as well as the insect pests in stored rice. The essential oil is chemically safe and acceptable to consumers, as synthetic chemical fungicides can cause adverse health effects to consumers.

Chemical composition and insecticidal activity of Cymbopogon citratus essential oil from Cuba and Brazil against housefly

Directory of Open Access Journals (Sweden)

Zeneida Teixeira Pinto

Full Text Available Essential oil of Cymbopogon citratus collected from Brazil and Cuba was tested to a chemical characterization and then was tested on the post-embryonic development of Musca domestica. The chemical composition analysis by GC-MS of the oils from Brazil/Cuba allowed the identification of 13 and 12 major constituents respectively; nine of them common to both. In the both oils, the main components were the isomers geranial and neral, which together form the compound citral. This corresponds to a total of 97.92%/Brazil and 97.69%/Cuba of the compounds identified. The monoterpene myrcene, observed only in the sample of Cuba, presented a large relative abundance (6.52%. The essential oil of C. citratus (Brazil/Cuba was dissolved in DMSO and tested at concentrations of 5, 10, 25, 50, 75 and 100% and citral was prepared by mixing 16.8 mg with 960 µL DMSO. Both essential oils and monoterpene citral were applied topically to newly-hatched larvae (1µL/larva. The results showed a lethal concentration (LC50 of 4.25 and 3.24% for the Brazilian and Cuban essential oils, respectively. Mortalities of larval and newly-hatched larvae to adult periods were dose-dependent for the two both oils as for monoterpene citral, reaching 90%. Both essential oils and citral caused morphological changes in adult specimens.

Chemical composition and insecticidal activity of Cymbopogon citratus essential oil from Cuba and Brazil against housefly.

Science.gov (United States)

Pinto, Zeneida Teixeira; Sánchez, Félix Fernández; dos Santos, Arith Ramos; Amaral, Ana Claudia Fernandes; Ferreira, José Luiz Pinto; Escalona-Arranz, Julio César; Queiroz, Margareth Maria de Carvalho

2015-01-01

Essential oil of Cymbopogon citratus collected from Brazil and Cuba was tested to a chemical characterization and then was tested on the post-embryonic development of Musca domestica. The chemical composition analysis by GC-MS of the oils from Brazil/Cuba allowed the identification of 13 and 12 major constituents respectively; nine of them common to both. In the both oils, the main components were the isomers geranial and neral, which together form the compound citral. This corresponds to a total of 97.92%/Brazil and 97.69%/Cuba of the compounds identified. The monoterpene myrcene, observed only in the sample of Cuba, presented a large relative abundance (6.52%). The essential oil of C. citratus (Brazil/Cuba) was dissolved in DMSO and tested at concentrations of 5, 10, 25, 50, 75 and 100% and citral was prepared by mixing 16.8 mg with 960 µL DMSO. Both essential oils and monoterpene citral were applied topically to newly-hatched larvae (1µL/larva). The results showed a lethal concentration (LC50) of 4.25 and 3.24% for the Brazilian and Cuban essential oils, respectively. Mortalities of larval and newly-hatched larvae to adult periods were dose-dependent for the two both oils as for monoterpene citral, reaching 90%. Both essential oils and citral caused morphological changes in adult specimens.

DC electric springs with DC/DC converters

DEFF Research Database (Denmark)

Wang, Qingsong; Cheng, Ming; Jiang, Yunlei

2016-01-01

The concept of DC electric spring (DCES) was recently proposed to solve the stability issue caused by integrating intermittent renewable energy sources (RESs) to DC microgrids. In this paper, a new topology of DCES is proposed based on DC/DC converters. The proposed DCES consists of a bi-directio......The concept of DC electric spring (DCES) was recently proposed to solve the stability issue caused by integrating intermittent renewable energy sources (RESs) to DC microgrids. In this paper, a new topology of DCES is proposed based on DC/DC converters. The proposed DCES consists of a bi...... and/or constant discharging for batteries is adopted and four operating modes are analyzed as charging-positive, charging-negative, discharging-positive and discharging-negative modes. An additional mechanism for fast charging or fast discharging is also designed to secure normal operation...... of batteries. With the proposed DCES, the power fluctuations due to intermittent RESs can be passed to non-critical loads (NCLs) and batteries while power on critical loads (CLs) is kept stable. This is possibly the first attempt to design a DCES with only DC/DC converters. The performances of the proposed...

Anticancer Effect and Apoptosis Induction of Cymbopogon citratus Plant on Head and Neck HTB43 Cancer Cell Lines

International Nuclear Information System (INIS)

Yen, N.; Zainah Adam; Arapoc, D.J.; Mohamed Zaffar Ali Mohamed Amiroudine; Shafii Khamis

2016-01-01

Lemongrass (Cymbopogon citratus) is a major crop in Asia, South and Central America, Africa and other tropical countries. It is commonly used as a culinary herb in Asian cuisine and also as medicinal herb in India. The objective of the present study was to investigate the anticancer effect of Cymbopogon citratus essential oil on human head and neck cancer cell lines. Lemongrass essential oil was obtained from fresh lemongrass leaves using the microwave extractor. The yield of the highly purified oil obtained was 0.62 %. The oil was investigated for its in-vitro cytotoxicity and apoptosis induction against human head and neck HTB43 cancer cell lines. The results showed promising cytotoxic effects with IC_5_0 value of 15.42 ± 6.10 μg/ ml (HTB43) respectively. In addition, the essential oil has found inducing apoptotic effect within HTB43 cells (25.71 ± 1.43 %). These preliminary results indicated that the oil had apoptosis-based cytotoxicity against head and neck cancer cells. However, further investigations need to be carried out in order to elucidate the anti-cancer properties of the oil. The phytochemicals properties of the active compounds found in the oil also need to be studied. (author)

Advanced DC/DC converters

CERN Document Server

Luo, Fang Lin

2003-01-01

DC/DC conversion techniques have undergone rapid development in recent decades. With the pioneering work of these authors, DC/DC converters have now moved into their sixth generation. This book offers a concise, practical presentation of DC/DC converters, summarizing the spectrum of conversion tecnologies and presentingmany new ideas and more than 100 new topologies. Nowhere else in the literature are DC/DC converters so logically sorted and systematically introduced, and nowhere else can readers find detailed information on prototype topologies that represent a major contribution to modern power engineering. More than 320 figures, 60 tables, and 500 formulae facilitate understand and provide precise data.

Produtividade e qualidade do óleo essencial de capim-limão, Cymbopogon citratus, DC., submetido a diferentes lâminas de irrigação

Directory of Open Access Journals (Sweden)

D.A. Pinto

2014-03-01

Full Text Available Devido às poucas informações sobre as práticas de cultivo do capim-limão (Cymbopogon citratus, DC. objetivou-se avaliar o efeito de lâminas de irrigação sobre: a produção de biomassa, o rendimento e composição do óleo essencial. O experimento foi instalado em ambiente protegido para possibilitar o controle das lâminas de irrigação e avaliar a viabilidade para situações em que as condições climáticas normais sejam inadequadas. O delineamento experimental foi em blocos inteiramente casualizados com cinco tratamentos e três repetições. Os dados foram submetidos à análise de variância pelo tese F e as médias comparadas pelo teste de Tukey a 5% de probabilidade. Na etapa um, os tratamentos consistiram da aplicação de lâminas referentes a 50%, 75%, 100%, 125% da evapotranspiração da cultura (ETc, irrigando duas vezes por semana e de 100% da evapotranspiração da cultura (ETc, irrigando uma vez por semana, sendo denominados de T1, T2, T3, T4 e T5, respectivamente. Na etapa dois, os tratamentos consistiram da aplicação de lâminas referentes a 50%, 75%, 100%, 125% da ETc irrigando uma vez por semana e de 100% da ETc, irrigando a cada 14 dias, sendo denominados de T6, T7, T8, T9 e T10 respectivamente. O corte do capim-limão foi realizado após 60 dias do início dos tratamentos. Avaliou-se a altura de plantas, o número de perfilhos por touceira, a massa seca da parte aérea, o rendimento e a composição do óleo essencial. O T5, caracterizado por estresse hídrico e intervalo de irrigação moderado, foi o que apresentou a maior produção de matéria seca, maior produtividade do capim-limão e maior estimativa da produtividade de óleo essencial e maior concentração de citral, na primeira etapa. Na etapa dois, o T6, correspondente ao estresse hídrico crescente e acentuado, foi o que apresentou maior estimativa da produtividade de óleo essencial. De acordo com os resultados observados, não foi possível definir

Chemical composition, antioxidant and antimicrobial activity of the essential oil and methanol extract of the Egyptian lemongrass Cymbopogon proximus Stapf

Energy Technology Data Exchange (ETDEWEB)

Selim, S.A.

2011-07-01

The present study was conducted to evaluate the in vitro antimicrobial and antioxidant properties of the essential oil (Eo) and methanol extract from a unique, Egyptian endemic plant, Cymbopogon proximus STAPF. The chemical composition of a hydrodistilled Eo of C. proximus was analyzed by a GC and GC/MS system. A total of 19 constituents representing 95.47% of the oil were identified: piperitone (72.44%), elemol (9.43%), a - eudesmol (4.34%), limonene (2.45%) and a - eudesmol. (Author).

Anti-ulcerogenic Activity of Extract and Some Isolated Flavonoids from Desmostachia bipinnata (L. Stapf

Directory of Open Access Journals (Sweden)

Amani, S. Awaad

2008-08-01

Full Text Available Five main flavonoid glycosides were isolated, for the first time, from the ethanol extract of Desmostachia bipinnata (L.Stapf ( Gramineae . They were identified as kaempferol(1, quercetin(2, quercetin-3-glucoside(3, trycin(4 and trycin-7-glucoside(5. The structure elucidation was based on UV, Electrospray ionization mass spectrometry (ESIMS, 1H and 13C NMR, proton- proton correlation spectroscopy ( 1H- 1H Cosy, distortionless enhancement by polarization transfer (DEPT, heteronuclear single quantum coherence (HSQC, and heteronuclear multiple bond correlations spectrum (HMBC. The total extract (200 and 300 mg/kg and two of the isolated compounds (trycin and trycin-7-glucoside.100 mg/kg each showed a very promising antiulcerogenic activity with curative ratios; 68.31, 70.54, 77.39 and 78.93%, respectively.

One bis-indole alkaloid-voacamine from Voacanga africana Stapf: biological activity evaluation of PTP1B in vitro utilizing enzymology method based on SPRi expriment.

Science.gov (United States)

Wang, Yan-Qiu; Li, Hong-Xiang; Liu, Xiao-Chun; Zhao, Jin-Shuang; Liu, Rong-Qiang; Huai, Wen-Ying; Ding, Wei-Jun; Zhang, Tian-E; Deng, Yun

2018-05-31

One known bis-indole alkaloid-voacamine was isolated from Voacanga africana Stapf and Surface Plasmon Resonance imaging (SPRi) exprement showed that this alkaloid could be combine with Protein Tyrosine Phosphatase1B (PTP1B). Then the PTP1B activity inhibition experiment display that the compound showed an outstanding promoting activity to PTP1B.

A Unidirectional DC-DC Autotransformer for DC Grid Application

Directory of Open Access Journals (Sweden)

Meng Zhou

2018-03-01

Full Text Available Conventional unidirectional DC-DC converters for DC grid application employ DC-AC-DC two-stage conversion technology and suffer from high converter cost and power loss. To solve these issues, a unidirectional step-up DC-DC autotransformer (UUDAT and a unidirectional step-down DC-DC autotransformer (DUDAT are studied. The UUDAT and DUDAT are composed of a series connection of diode bridges and voltage source converters. Topologies of UUDAT and DUDAT are detailed. The harmonic and un-controllability issues are discussed. Control and possible application scenarios for UUDAT and DUDAT are depicted. DC fault isolation mechanism and the methods of dimensioning the voltage and power ratings of the components in UUDAT and DUDAT are studied. Extensive simulations on power system level and experiments on a UUDAT and DUDAT prototype verified their technical feasibility.

Plantes aromatiques du Plateau des Cataractes (Bassin du Congo. Caractérisation du chémotype de l'huile essentielle de Cymbopogon nardus (L. Rendle acclimaté au Congo-Brazzaville

Directory of Open Access Journals (Sweden)

Silou, T.

2017-01-01

Full Text Available Aromatic plants from the Plateau des Cataractes (Congo Basin. Chemotype characterization of essential oil of Cymbopogon nardus (L. Rendle acclimatized in Congo-Brazzaville. Description. The essential oils of Cymbopogon nardus (L. Rendle, Cymbopogon winterianus Jowitt, Cymbopogon flexuosus (Nees ex Steud. Wats and Cymbopogon citratus L. (DC. Stapf (lemongrass consist of more than 80% of the following constituents: citronellal, geraniol, citral, citronellol, geranyl acetate, and limonene. For the purposes of business transactions, it is therefore important to know the exact chemical composition of the essential oils produced. Objectives. Chemotype evaluation of C. nardus acclimatized on the Plateau des Cataractes. Method. The essential oils of C. nardus were extracted by hydrodistillation and analyzed by chromatography (GC and GC/MS over a period of more than ten years. Results. Cymbopogon nardus was found to produce a Java type citronella essential oil (C. winterianus with the following profile: citronellal (40-48%, geraniol (10-22%, citronellol (10-12%, limonene (2-3%, geranyl acetate (1-2%, linalool (1%. The difference between these two types of citronella, Java and Ceylon, was based on the relative proportions of their three main constituents: citronellal, geraniol and citronellol. Cymbopogon nardus is known for its high variability, with two varieties and sept subvarieties. Conclusions. The citronella established in West and Central Africa under the name of Cymbopogon nardus (Java type could be considered a Cymbopogon winterianus Jowitt, based on the chemical composition of its essential oil.

Bactericidal activity of herbal volatile oil extracts against multidrug resistant Acinetobacter baumannii

OpenAIRE

Amornrat Intorasoot; Piyaorn Chornchoem; Siriwoot Sookkhee; Sorasak Intorasoot

2017-01-01

Aim: To investigate the antibacterial activity of ten volatile oils extracted from medicinal plants, including galangal (Alpinia galanga Linn.), ginger (Zingiber officinale), plai (Zingiber cassumunar Roxb.), lime (Citrus aurantifolia), kaffir lime (Citrus hystrix DC.), sweet basil (Ocimum basilicum Linn.), tree basil (Ocimum gratissimum), lemongrass (Cymbopogon citratus DC.), clove (Syzygium aromaticum) and cinnamon (Cinnamomum verum) against four standard strains of Staphylococcus aureus, E...

A resonant dc-dc power converter assembly

DEFF Research Database (Denmark)

2015-01-01

The present invention relates to a resonant DC-DC power converter assembly comprising a first resonant DC-DC power converter and a second resonant DC-DC power converter having identical circuit topologies. A first inductor of the first resonant DC-DC power converter and a second inductor of the s......The present invention relates to a resonant DC-DC power converter assembly comprising a first resonant DC-DC power converter and a second resonant DC-DC power converter having identical circuit topologies. A first inductor of the first resonant DC-DC power converter and a second inductor...... of the second resonant DC-DC power converter are configured for magnetically coupling the first and second resonant DC-DC power converters to each other to forcing substantially 180 degrees phase shift, or forcing substantially 0 degree phase shift, between corresponding resonant voltage waveforms of the first...

Step-Up DC-DC converters

DEFF Research Database (Denmark)

Forouzesh, Mojtaba; Siwakoti, Yam P.; Gorji, Saman A.

2017-01-01

on the general law and framework of the development of next-generation step-up dc-dc converters, this paper aims to comprehensively review and classify various step-up dc-dc converters based on their characteristics and voltage-boosting techniques. In addition, the advantages and disadvantages of these voltage......DC-DC converters with voltage boost capability are widely used in a large number of power conversion applications, from fraction-of-volt to tens of thousands of volts at power levels from milliwatts to megawatts. The literature has reported on various voltage-boosting techniques, in which......-boosting techniques and associated converters are discussed in detail. Finally, broad applications of dc-dc converters are presented and summarized with comparative study of different voltage-boosting techniques....

A resonant dc-dc power converter assembly

OpenAIRE

Madsen, Mickey Pierre

2015-01-01

The present invention relates to a resonant DC-DC power converter assembly comprising a first resonant DC-DC power converter and a second resonant DC-DC power converter having identical circuit topologies. A first inductor of the first resonant DC-DC power converter and a second inductor of the second resonant DC-DC power converter are configured for magnetically coupling the first and second resonant DC-DC power converters to each other to forcing substantially 180 degrees phase shift, or fo...

Les glomales indigènes de la forêt claire à Isoberlinia doka (Craib et Stapf à Wari-Maro au centre du Bénin

Directory of Open Access Journals (Sweden)

Houngnandan, P.

2009-01-01

Full Text Available Indigenous Glomales of Isoberlinia doka (Craib and Stapf Woodland of Wari-Maro in Centre of Benin. This study described the indigenous glomalean diversity in Isoberlinia doka (Craib et Stapf woodland of Wari-Maro for an amelioration of seedling for revegetation. To this end, the trap culture with Zea mays was undertaken using a 16 replicates and 7 treatments completely randomized design under greenhouse. The data obtained were calculated and statistically treated, at 5% of significance, and showed that the maxima of mycorrhizal root colonization and the number of spores were scored in soil under cultures. Six species of glomalean spores divided in 2 genera (Glomus and Scutellospora, 2 families (Glomaceae and Gigasporaceae were counted and identified all around the forest. Scutellospora gregaria (46.6%, 54.2%, 46.6% and Glomus aggregatum (52.3; 44.4%; 43.9% respectively in forest, field and fallow are the two most prevalent species in the rhizosphere of Isoberlinia doka. The Shannon specific index of diversity and the equitability of Pielou indicated that the lowest values are obtained at Wari-Maro on fallow and highest one at Agbassa (fields and fallow. In conclusion, the best seedlings production sites of Isoberlinia doka are in Agbassa on fallow and in the fields.

Bactericidal activity of herbal volatile oil extracts against multidrug-resistant Acinetobacter baumannii

OpenAIRE

Intorasoot, Amornrat; Chornchoem, Piyaorn; Sookkhee, Siriwoot; Intorasoot, Sorasak

2017-01-01

Aim: The aim of the study is to investigate the antibacterial activity of 10 volatile oils extracted from medicinal plants, including galangal (Alpinia galanga Linn.), ginger (Zingiber officinale), plai (Zingiber cassumunar Roxb.), lime (Citrus aurantifolia), kaffir lime (Citrus hystrix DC.), sweet basil (Ocimum basilicum Linn.), tree basil (Ocimum gratissimum), lemongrass (Cymbopogon citratus DC.), clove (Syzygium aromaticum), and cinnamon (Cinnamomum verum) against four standard strains of ...

Mootrala Karma of Kusha [Imperata cylindrica Beauv.] and Darbha [Desmostachya bipinnata Stapf.] - A comparative study.

Science.gov (United States)

Shah, Niti T; Pandya, Tarulata N; Sharma, Parameshwar P; Patel, Bhupesh R; Acharya, Rabinarayan

2012-07-01

Kusha (Imperata cylindrica Beauv.) and Darbha (Desmostachya bipinnata Stapf.) are enlisted among Trinapanchamoola, which is a well-known diuretic and are individually enumerated in the Mootravirechaneeya Dashemani. The article deals with the evaluation and comparison of the individual Mootrala (diuretic) action of the two drugs in healthy volunteers. In this study, 29 healthy volunteers were divided into three groups administered with Darbha Moola Churna, Kusha Moola Churna, and placebo in each group for 14 days. The volunteers were subjected to evaluation of diuretic activity by maintaining the daily total input-output charts during the course of the study. The volunteers were advised to consume a minimum 2 l of water daily. Results show that Darbha and Kusha leaded to a percentage increase in urine volume as compared to placebo group, but the result was statistically insignificant.

Step-Up DC-DC converters

DEFF Research Database (Denmark)

Forouzesh, Mojtaba; Siwakoti, Yam P.; Gorji, Saman A.

2017-01-01

on the general law and framework of the development of next-generation step-up dc-dc converters, this paper aims to comprehensively review and classify various step-up dc-dc converters based on their characteristics and voltage-boosting techniques. In addition, the advantages and disadvantages of these voltage...

75 FR 23571 - Airworthiness Directives; McDonnell Douglas Corporation Model DC-10-10, DC-10-10F, DC-10-15, DC...

Science.gov (United States)

2010-05-04

... Airworthiness Directives; McDonnell Douglas Corporation Model DC- 10-10, DC-10-10F, DC-10-15, DC-10-30, DC-10... amends Sec. 39.13 by adding the following new AD: 2010-09-12 McDonnell Douglas Corporation: Amendment 39... to McDonnell Douglas Corporation Model DC- 10-10, DC-10-10F, DC-10-15, DC-10-30, DC-10-30F (KC-10A...

Chemical Composition of Essential Oils from Thymus vulgaris, Cymbopogon citratus, and Rosmarinus officinalis, and Their Effects on the HIV-1 Tat Protein Function.

Science.gov (United States)

Feriotto, Giordana; Marchetti, Nicola; Costa, Valentina; Beninati, Simone; Tagliati, Federico; Mischiati, Carlo

2018-02-01

New drugs would be beneficial to fight resistant HIV strains, in particular those capable of interfering with essential viral functions other than those targeted by highly active antiretroviral therapy drugs. Despite the central role played by Tat protein in HIV transcription, a search for vegetable extracts able to hamper this important viral function was never carried out. In this work, we evaluated the chemical composition and possible interference of essential oil from Thymus vulgaris, Cananga odorata, Cymbopogon citratus, and Rosmarinus officinalis with the Tat/TAR-RNA interaction and with Tat-induced HIV-1 LTR transcription. GC/MS Analysis demonstrated the biodiversity of herbal species translated into essential oils composed of different blends of terpenes. In all of them, 4 - 6 constituents represent from 81.63% to 95.19% of the total terpenes. Essential oils of Thymus vulgaris, Cymbopogon citratus, and Rosmarinus officinalis were active in interfering with Tat functions, encouraging further studies to identify single terpenes responsible for the antiviral activity. In view of the quite different composition of these essential oils, we concluded that their interference on Tat function depends on specific terpene or a characteristic blend. © 2018 Wiley-VHCA AG, Zurich, Switzerland.

DC Home Appliances for DC Distribution System

Directory of Open Access Journals (Sweden)

MUHAMMAD KAMRAN

2017-10-01

Full Text Available This paper strengthens the idea of DC distribution system for DC microgrid consisting of a building of 50 apartments. Since the war of currents AC system has been dominant because of the paucity of research in the protection of the DC system. Now with the advance research in power electronics material and components, generation of electricity is inherently DC as by solar PV, fuel cell and thermoelectric generator that eliminates the rectification process. Transformers are replaced by the power electronics buck-boost converters. DC circuit breakers have solved the protection problems for both DC transmission and distribution system. In this paper 308V DC microgrid is proposed and home appliances (DC internal are modified to operate on 48V DC from DC distribution line. Instead of using universal and induction motors in rotary appliances, BLDC (Brushless DC motors are proposed that are highly efficient with minimum electro-mechanical and no commutation losses. Proposed DC system reduces the power conversion stages, hence diminishes the associated power losses and standby losses that boost the overall system efficiency. So in view of all this a conventional AC system can be replaced by a DC system that has many advantages by cost as well as by performance

Pharmacological evaluation of anxiolytic property of aqueous root extract of Cymbopogon citratus in mice

Directory of Open Access Journals (Sweden)

David Arome

2014-01-01

Full Text Available Aim: This study was designed to evaluate the anxiolytic property of aqueous root extract of Cymbopogon citratus in mice. Materials and Methods: In this study, stress induced hyperthermia (SIH, elevated plus maze (EPM and open field experimental models were employed. Results: In SIH model, the extract caused a significant (P 0.05 effect. In open field model, 200 mg/kg and 600 mg/kg extract doses significantly (P < 0.05 increased locomotion of the mice more than the standard, while rearing and defecation were less in the extract groups. Conclusion: In different experimental models used significant anxiolytic effect was observed of the aqueous extract at different dose levels in comparison to reference standard and normal saline group. This clearly justified its folkloric application in the treatment of anxiety disorders.

Family of multiport bidirectional DC-DC converters

NARCIS (Netherlands)

Tao, H.; Kotsopoulos, A.; Duarte, J.L.; Hendrix, M.A.M.

2006-01-01

Multiport DC-DC converters are of potential interest in applications such as generation systems utilising multiple sustainable energy sources. A family of multiport bidirectional DC-DC converters derived from a general topology is presented. The topology shows a combination of DC-link and magnetic

Optimized extraction of polysaccharides from Cymbopogon citratus and its biological activities.

Science.gov (United States)

Thangam, Ramar; Suresh, Veeraperumal; Kannan, Soundarapandian

2014-04-01

In this study the extraction of hot water soluble polysaccharides (HWSPs) from Cymbopogon citratus using hot water decoction was discussed. Response surface methodology (RSM) based on a three level, three variable central composite rotatable design (CCRD), was employed to obtain best possible combination of extraction time (X1: 30-180 min), extraction temperature (X2: 70-100 °C) and water to the raw material ratio (X3: 10-60) for maximum HWSPs extraction. The optimum extraction conditions were as follows: extraction time was around 113.81 min, extraction temperature at 99.66 °C and the ratio of water to raw material was 33.11 g/mL. Under these conditions, the experimental yield was 13.24±0.23%, which is well in close agreement with the value predicted by RSM model yield (13.19%). The basic characterization of HWSPs was determined by using the FTIR. These preliminary in vitro biological studies indicated that lemongrass polysaccharides were useful for anticancer therapy. Copyright © 2014 Elsevier B.V. All rights reserved.

Design and Testing of Boost Type DC/DC Converter for DC Motor Control Applications

OpenAIRE

Samman, Faizal Arya; Akil, Yusri Syam; Noor, Nirwan A.

2017-01-01

in The Proceeding of The 2nd International Symposium on Smart Material and Mechatronics 2015 This paper presents the design and testing of a boost type DC/DC converter circuit, which can be used for DC motor control applications. The Boost converter is designed using DC chopper and DC chopper cascade configurations. The experimental setup was made by connecting the boost converter circuit with four types of DC motor, i.e. self-excited DC motor shunt, series, compound and separately exci...

Qualidade de produtos a base de plantas medicinais comercializados no Brasil: castanha-da-índia (Aesculus hippocastanum L., capim-limão (Cymbopogon citratus (DC. Stapf e centela (Centella asiatica (L. Urban Quality of products made from medicinal plants commercialized in Brazil: horsechestnut (Aesculus hippocastanum L., lemongrass (Cymbopogon citratus (DC. Stapf, and gotu kola (Centella asiatica (L. Urban

Directory of Open Access Journals (Sweden)

Joabe Gomes de Melo

2007-03-01

Full Text Available Com o objetivo de avaliar a qualidade de produtos a base de plantas medicinais, analisou-se dez amostras de castanha-da-índia, onze de capim-limão e seis de centela, comercializadas em farmácias da cidade do Recife, provenientes de indústrias de várias partes do país. Analisamos as informações técnico-científicas nos rótulos e/ou bulas de acordo com as exigências e obrigatoriedades da legislação brasileira (RDC n. 140 de 29/05/2003 e na RDC n. 102 de 30/11/2000, e embasamento da literatura científica. Também avaliou-se as características organolépticas, a autenticidade e a pureza dos produtos. Constatou-se ausência das informações obrigatórias em 92,59% das amostras. Dentre os termos vedados, foi comum a sugestão da inexistência de efeitos colaterais ou adversos. Quanto as indicações terapêuticas não se observou padronização técnica dos termos nem comprovação científica para algumas das atividades atribuídas pelos fabricantes. Todas as amostras foram consideradas autênticas com base nos testes fitoquímicos e farmacobotânicos. Na análise da pureza 59,26% das amostras foram reprovadas, devido principalmente ao elevado teor de umidade e cinzas totais. Constata-se que além dos produtos comercializados carecerem de informações e qualidade adequadas, há necessidade urgente de uma fiscalização efetiva por parte dos órgãos competentes.Aiming to evaluate the quality of products made from medicinal plants, there were analyzed ten samples of horsechestnut, eleven samples of lemongrass, and six samples of gotu kola commercialized in pharmacies from the city of Recife (Pernambuco, Brazil, coming from industries of several parts of the country. We analyzed the technical-scientific information on the labels and/or directions according to the requirements and obligations of Brazilian law (laws "RDC 140 of 29/05/2003" and "RDC 102 of 30/11/2000" and to scientific literature embasement. The products' organoleptic characteristics, authenticity, and purity were also evaluated. The absence of obligatory information was verified in 92.59% of the samples. Among the blacked terms, it was common to find products that suggested inexistent collateral or adverse effects. Technical terms were not standardized and the manufacturers did not provide scientific proof for some of the activities credited to the products. All samples were considered authentic based on the phytochemical and pharmacobotanical tests. The purity analysis considered 59.26% of the samples inappropriate, mainly due to the high total levels of humidity and ashes. It was verified that besides the lack of adequate information and quality of the commercialized products, there is an urgent need for an effective inspection by the suitable agencies.

Five-Level Active-Neutral-Point-Clamped DC/DC Converter for Medium-Voltage DC Grids

DEFF Research Database (Denmark)

Liu, Dong; Deng, Fujin; Chen, Zhe

2017-01-01

This paper proposes a five-level active-neutralpoint- clamped (5L-ANPC) dc/dc converter for applications in medium voltage dc (MVDC) grids. A modulation strategy is proposed for the 5L-ANPC dc/dc converter to generate multilevel voltage waveforms, which can effectively reduce voltage change rate dv...... effectively eliminate high voltage leaps caused by the dead time effect. In addition, a capacitor voltage control strategy is proposed for the 5L-ANPC dc/dc converter to ensure the balanced flying capacitor voltage and desired five-level voltage waveforms. Finally, simulation and experimental studies...

[Alcoholic extract of lemongrass (Cymbopogon citratus) on the control of Boophilus microplus in cattle].

Science.gov (United States)

Heimerdinger, Arli; Olivo, Clair J; Molento, Marcelo B; Agnolin, Carlos A; Ziech, Magnos F; Scaravelli, Luciene Fernanda B; Skonieski, Fernando R; Both, José F; Charão, Pablo S

2006-01-01

The objective of this study was to determine the effect of lemongrass (Cymbopogon citratus) alcoholic extracts on the control of Boophilus microplus in naturally infested Holstein cows. Twelve animals were allocated in three groups of four animals. Group 1 was treated with amitraz at 0.025%, Group 2 was treated with lemongrass extracts at 1.36% and Group 3 with the same product at 2.72% of the plant. Engorged ticks were evaluated on animals with length superior to 4.0 mm, before (mean of days -3, -2, -1) and at 1, 2, 3, 4, 5, 6, 7 and 14 days after treatment. The mean efficacy of amitraz was 97.93%. Lemongrass extract at 2.72% reduced tick infestation by 40.3, 46.6 and 41.5% on day 3, 7 and 14 post-treatment, respectively.

Control of improved full-bridge three-level DC/DC converter for wind turbines in a DC grid

DEFF Research Database (Denmark)

Deng, Fujin; Chen, Zhe

2013-01-01

transformer in the IFBTL dc/dc converter. A modulation strategy, including two operation modes, is proposed for the IFBTL dc/dc converter. Then, a voltage balancing control strategy is proposed for the IFBTL dc/dc converter. Furthermore, the control of the wind turbine based on the IFBTL dc/dc converter......This paper presents an improved full-bridge three-level (IFBTL) dc/dc converter for a wind turbine in a dc grid by inserting a passive filter into the dc/dc converter to improve the performance of the converter. The passive filter can effectively reduce the voltage stress of the medium frequency...

IGBT Based DC/DC Converter

Directory of Open Access Journals (Sweden)

M. Akherraz

1997-12-01

Full Text Available This paper presents an in-depth analytical and experimental investigation of an indirect DC-DC converter. The DC-AC conversion is a full bridge based on IGBT power modules, and the AC-DC conversion is done via a high  frequency AC link and a first diode bridge. The AC link, which consists of snubbing capacitors and a variable air-gap transformer, is analytically designed to fulfill Zero Voltage commutation requirement. The proposed converter is simulated using PSPICE and a prototype is designed built and tested in the laboratory. PSPICE simulation and experimental results are presented and compared.

Three-port DC-DC converter with new integrated transformer for DC Distribution Systems

DEFF Research Database (Denmark)

Ouyang, Ziwei; Andersen, Michael A. E.

2014-01-01

A new integrated transformer for three-port dc-dc converter is proposed to overcome the power coupling effect existed in some known multiple inputs dc-dc converters. Orthogonal primary windings arrangement and in series connection of diagonal secondary Windings enables a fully power decoupling...

Three new DC-to-DC Single-Switch Converters

Directory of Open Access Journals (Sweden)

Barry W. Williams

2017-06-01

Full Text Available This paper presents a new family of three previously unidentified dc-to-dc converters, buck, boost, and buck-boost voltage-transfer-function topologies, which offer advantageous transformer coupling features and low capacitor dc voltage stressing. The three single-switch, single-diode, converters offer the same features as basic dc-to-dc converters, such as the buck function with continuous output current and the boost function with continuous input current. Converter time-domain simulations and experimental results (including transformer coupling support and extol the dc-to-dc converter concepts and analysis presented.

Anti-proliferative effect of the essential oil of Cymbopogon citratus (DC) Stapf (lemongrass) on intracellular amastigotes, bloodstream trypomastigotes and culture epimastigotes of Trypanosoma cruzi (Protozoa: Kinetoplastida).

Science.gov (United States)

Santoro, G F; Cardoso, M G; Guimarães, L G L; Freire, J M; Soares, M J

2007-10-01

This study analyses the anti-proliferative effect of lemongrass essential oil and its main constituent (citral) on all 3 evolutive forms of Trypanosoma cruzi. Steam distillation was used to obtain lemongrass essential oil, with chemical composition determined by gas chromatography (GC) and GC coupled to mass spectrometry (GC-MS). The IC50/24 h (concentration that reduced the parasite population by 50%) of the oil and of citral upon T. cruzi was determined by cell counting in a Neubauer chamber, while morphological alterations were visualized by scanning and transmission electron microscopy. Treatment with the essential oil resulted in epimastigote growth inhibition with IC50=126.5 microg/ml, while the IC50 for trypomastigote lysis was 15.5 microg/ml. The IC50/48 h for the Association Index (% macrophage infection x number of amastigotes per cell) was 5.1 microg/ml, with a strong inhibition of intracellular amastigote proliferation. Ultrastructural analysis demonstrated cytoplasmic and nuclear extraction, while the plasma membrane remained morphologically preserved. Our data show that lemongrass essential oil is effective against T. cruzi trypomastigotes and amastigotes, and that its main component, citral, is responsible for the trypanocidal activity. These results indicate that essential oils can be promising anti-parasitic agents, opening perspectives to the discovery of more effective drugs of vegetal origin for treatment of parasitic diseases. However, additional cytotoxicity experiments on different cell lines and tests in a T. cruzi-mouse model are needed to support these data.

75 FR 60602 - Airworthiness Directives; McDonnell Douglas Corporation Model DC-10-10, DC-10-10F, DC-10-15, DC...

Science.gov (United States)

2010-10-01

... Airworthiness Directives; McDonnell Douglas Corporation Model DC- 10-10, DC-10-10F, DC-10-15, DC-10-30, DC-10... adding the following new AD: 2010-20-14 McDonnell Douglas Corporation: Amendment 39-16449. Docket No. FAA... the airplanes identified in paragraphs (c)(1) and (c)(2) of this AD. (1) McDonnell Douglas Corporation...

75 FR 38943 - Airworthiness Directives; McDonnell Douglas Corporation Model DC-10-10, DC-10-10F, DC-10-30, DC...

Science.gov (United States)

2010-07-07

...-0672; Directorate Identifier 2010-NM-047-AD] RIN 2120-AA64 Airworthiness Directives; McDonnell Douglas...: McDonnell Douglas Corporation: Docket No. FAA-2010-0672; Directorate Identifier 2010-NM-047-AD. Comments Due... applies to McDonnell Douglas Corporation Model DC- 10-10, DC-10-10F, DC-10-30, DC-10-30F (KDC-10), DC-10...

75 FR 6160 - Airworthiness Directives; McDonnell Douglas Corporation Model DC-10-10, DC-10-10F, DC-10-15, DC...

Science.gov (United States)

2010-02-08

...-0032; Directorate Identifier 2009-NM-213-AD] RIN 2120-AA64 Airworthiness Directives; McDonnell Douglas...: McDonnell Douglas Corporation: Docket No. FAA-2010-0032; Directorate Identifier 2009-NM-213-AD. Comments Due... applies to McDonnell Douglas Corporation Model DC- 10-10, DC-10-10F, DC-10-15, DC-10-30, DC-10-30F (KC-10A...

Toxicity and repellency of essential oils to Zabrotes subfasciatus (Boheman (Coleoptera, Chrysomelidae, Bruchinae in Phaseolus vulgaris L Toxicidade e repelência de óleos essenciais a Zabrotes subfasciatus (Boheman (Coleoptera, Chrysomelidae, Bruchinae em grãos de Phaseolus vulgaris L

Directory of Open Access Journals (Sweden)

Solange Maria de França

2012-09-01

Full Text Available The effects of tangerine (Phaseolus vulgaris Blanco, lemon (Citrus medica limonum Lush, pear orange (Citrus sinensis L. Osbeck, red copaiba (Copaifera langsdorffii Desf., rosemary (Baccharis dracunculifolia De Candole, Eucalyptus (Eucalyptus globulus Labillardière and E. citriodora Hook, lemongrass (Cymbopogon citratus Stapf. and citronella (Cimbopogon nardus Linnaeus oils at several concentrations on Zabrotes subfasciatus (Boheman were studied. In toxicity tests, grains of Phaseolus vulgaris L. cv. Rajadinho were impregnated with oils and infested with adults of Z. subfasciatus up to 24 hours old. All tested oils were effective in reducing the viable egg-laying and adult emergence of this pest, in function of the concentrations used, highlighting E. citriodora and E. globulus oils which caused 100% effectiveness from 0.5 mL Kg-1 concentration. In repellency tests, two arenas consisting of plastic containers, connected symmetrically to a central box by two plastic tubes were used. In one of the boxes, untreated beans were placed and on the other ones beans treated with each oil concentration were used. In the central box, five couples of Z. subfasciatus were released. Grains of P. vulgaris treated with oils of E. citriodora, C. citratus and C. oleifera reduced the attraction percentage of Z. subfasciatus adults, while the E. globulus increased this percentage. The percentages of reduced viable eggs ranged from 17.9% (C. medica limonum to 93.3% (C. nardus, while the reduction on the number of emerged insects was 23.9% and 95.9%, respectively for these same oils.Estudaram-se os efeitos dos óleos de tangerina 'Cravo' (Phaseolus vulgaris Blanco, limão-siciliano (Citrus medica limonum Lush, laranja 'Pêra' (Citrus sinensis L. Osbeek, copaíba-vermelha (Copaifera langsdorffii Desf., alecrim-do-campo (Baccharis dracunculifolia De Candole, eucalipto (Eucalyptus globulus Labillardière e Eucalyptus citriodora Hook, capim-santo (Cymbopogon citratus

75 FR 61989 - Airworthiness Directives; McDonnell Douglas Corporation Model DC-8-31, DC-8-32, DC-8-33, DC-8-41...

Science.gov (United States)

2010-10-07

... Airworthiness Directives; McDonnell Douglas Corporation Model DC- 8-31, DC-8-32, DC-8-33, DC-8-41, DC-8-42, and... to all of the McDonnell Douglas Corporation airplanes identified above. The existing AD currently... the following new airworthiness directive (AD): 2010-21-03 McDonnell Douglas Corporation: Amendment 39...

Multi Bus DC-DC Converter in Electric Hybrid Vehicles

Science.gov (United States)

Krithika, V.; Subramaniam, C.; Sridharan, R.; Geetha, A.

2018-04-01

This paper is cotncerned with the design, simulation and fabrication of the prototype of a Multi bus DC- DC converter operating from 42V DC and delivering 14V DC and 260V DC. As a result, three DC buses are interconnected through a single power electronic circuitry. Such a requirement is energized in the development of a hybrid electric automobile which uses the technology of fuel cell. This is implemented by using a Bidirectional DC-DC converter configuration which is ideally suitable for multiple outputs with mutual electrical isolation. For the sake of reduced size and cost of step-up transformer, selection of a high frequency switching cycle at 10 KHz was done.

Step-Up DC-DC Power Converter

DEFF Research Database (Denmark)

2015-01-01

The present invention relates to a step-up DC-DC power converter which comprises a primary side circuit and a secondary side circuit coupled through a galvanic isolation barrier. The primary side circuit comprises a positive and a negative input terminal for receipt of an input voltage and an input...... being charged from the input voltage and discharged to the output capacitor through the galvanic isolation barrier in accordance with a switch control signal to produce the converter output voltage. The step-up DC-DC power converter comprises an electrical short-circuit connection across the galvanic...

AC-DC PFC Converter Using Combination of Flyback Converter and Full-bridge DC-DC Converter

Directory of Open Access Journals (Sweden)

Moh. Zaenal Efendi

2014-06-01

Full Text Available This paper presents a combination of power factor correction converter using Flyback converter and Full-bridge dc-dc converter in series connection. Flyback converter is operated in discontinuous conduction mode so that it can serve as a power factor correction converter and meanwhile Full-bridge dc-dc converter is used for dc regulator. This converter system is designed to produce a 86 Volt of output voltage and 2 A of output current. Both simulation and experiment results show that the power factor of this converter achieves up to 0.99 and meets harmonic standard of IEC61000-3-2. Keywords: Flyback Converter, Full-bridge DC-DC Converter, Power Factor Correction.

Early Oscillation Detection for DC/DC Converter Fault Diagnosis

Science.gov (United States)

Wang, Bright L.

2011-01-01

The electrical power system of a spacecraft plays a very critical role for space mission success. Such a modern power system may contain numerous hybrid DC/DC converters both inside the power system electronics (PSE) units and onboard most of the flight electronics modules. One of the faulty conditions for DC/DC converter that poses serious threats to mission safety is the random occurrence of oscillation related to inherent instability characteristics of the DC/DC converters and design deficiency of the power systems. To ensure the highest reliability of the power system, oscillations in any form shall be promptly detected during part level testing, system integration tests, flight health monitoring, and on-board fault diagnosis. The popular gain/phase margin analysis method is capable of predicting stability levels of DC/DC converters, but it is limited only to verification of designs and to part-level testing on some of the models. This method has to inject noise signals into the control loop circuitry as required, thus, interrupts the DC/DC converter's normal operation and increases risks of degrading and damaging the flight unit. A novel technique to detect oscillations at early stage for flight hybrid DC/DC converters was developed.

Superconducting energy stabilizer with charging and discharging DC-DC converters

International Nuclear Information System (INIS)

Kim, S.H.; Kostecki, E.L.; DeWinkel, C.C.

1992-01-01

This patent describes a superconducting energy stabilizer having multiple load connections and employing DC-DC conversion for storing energy in a superconducting inductive energy storage device having a first end and a second end, and for releasing the stored energy from the superconducting inductive energy storage device to a load or loads or to a utility or an industrial electrical distribution system, the superconducting energy stabilizer having multiple load connections and employing DC-DC conversion. It comprises: energy storage cell means for supplying energy to the load, discharging DC-DC converter means for releasing energy from the superconducting inductive energy storage device to the energy storage cell means, the discharging DC-DC converter means having input terminals, output terminals, and a discharging control line means for carrying signals controlling the operation of the discharging DC-DC converter means, one of the input terminals of the discharging DC-DC converter means coupled to the first end of the superconducting energy storage device

dc Arc Fault Effect on Hybrid ac/dc Microgrid

Science.gov (United States)

Fatima, Zahra

The advent of distributed energy resources (DER) and reliability and stability problems of the conventional grid system has given rise to the wide spread deployment of microgrids. Microgrids provide many advantages by incorporating renewable energy sources and increasing the reliability of the grid by isolating from the main grid in case of an outage. AC microgrids have been installed all over the world, but dc microgrids have been gaining interest due to the advantages they provide over ac microgrids. However the entire power network backbone is still ac and dc microgrids require expensive converters to connect to the ac power network. As a result hybrid ac/dc microgrids are gaining more attention as it combines the advantages of both ac and dc microgrids such as direct integration of ac and dc systems with minimum number of conversions which increases the efficiency by reducing energy losses. Although dc electric systems offer many advantages such as no synchronization and no reactive power, successful implementation of dc systems requires appropriate protection strategies. One unique protection challenge brought by the dc systems is dc arc faults. A dc arc fault is generated when there is a gap in the conductor due to insulation degradation and current is used to bridge the gap, resulting in an arc with very high temperature. Such a fault if it goes undetected and is not extinguished can cause damage to the entire system and cause fires. The purpose of the research is to study the effect of the dc arc fault at different locations in the hybrid ac/dc microgrid and provide insight on the reliability of the grid components when it is impacted by arc faults at various locations in the grid. The impact of dc arc fault at different locations on the performance of the PV array, wind generation, and constant power loads (CPL) interfaced with dc/dc converters is studied. MATLAB/Simulink is used to model the hybrid ac/dc microgrid and arc fault.

Milliwatt dc/dc Inverter

Science.gov (United States)

Mclyman, C. W.

1983-01-01

Compact dc/dc inverter uses single integrated-circuit package containing six inverter gates that generate and amplify 100-kHz square-wave switching signal. Square-wave switching inverts 10-volt local power to isolated voltage at another desired level. Relatively high operating frequency reduces size of filter capacitors required, resulting in small package unit.

Use of Cymbopogon citratus essential oil in food preservation: Recent advances and future perspectives.

Science.gov (United States)

Ekpenyong, Christopher E; Akpan, Ernest E

2017-08-13

The economic burdens and health implications of food spoilage are increasing. Contamination of food sources by fungi, bacteria, yeast, nematodes, insects, and rodents remains a major public health concern. Research has focused on developing safer natural products and innovations to meet consumers' acceptance as alternatives to synthetic food preservatives. Many recent novel preservative techniques and applications of both natural and synthetic origin continue to proliferate in food and chemical industries. In particular, some essential oils of plant origin are potent food preservatives and are thus attractive alternatives to synthetic preservatives. This paper provides an overview of recent advances and future prospects in assessing the efficacy of the use of Cymbopogon citratus (lemongrass) essential oil in food preservation. The possible mechanisms of action and toxicological profile as well as evidence for or against the use of this essential oil as an alternative to synthetic food preservatives in domestic and industrial applications are discussed.

75 FR 63040 - Airworthiness Directives; McDonnell Douglas Corporation Model DC-10-10, DC-10-10F, DC-10-30, DC...

Science.gov (United States)

2010-10-14

... Airworthiness Directives; McDonnell Douglas Corporation Model DC- 10-10, DC-10-10F, DC-10-30, DC-10-30F (KDC-10... following new airworthiness directive (AD): 2010-21-13 McDonnell Douglas Corporation: Amendment 39-16473... November 18, 2010. Affected ADs (b) None. Applicability (c) This AD applies to McDonnell Douglas...

75 FR 68246 - Airworthiness Directives; McDonnell Douglas Corporation Model DC-10-10, DC-10-10F, DC-10-15, DC...

Science.gov (United States)

2010-11-05

...-1044; Directorate Identifier 2010-NM-033-AD] RIN 2120-AA64 Airworthiness Directives; McDonnell Douglas..., 2007) and adding the following new AD: McDonnell Douglas Corporation: Docket No. FAA-2010-1044.... Applicability (c) This AD applies to all McDonnell Douglas Corporation Model DC-10-10, DC-10-10F, DC-10-15, DC...

Overview of Multi-DC-Bus Solutions for DC Microgrids

DEFF Research Database (Denmark)

Ricchiuto, D.; Mastromauro, R.A.; Liserre, Marco

2013-01-01

DC Microgrids have recently received a lot of attention in the last years due to high penetration of renewable energy sources as well as distributed energy storage systems. In the future DC microgrids could be preferable respect to AC microgrids in terms of redundancy since multi-DC-Bus solutions...... could provide a continuative power supply to the loads. An overview of Multi-DC-Bus solutions is presented in this paper. The performances are compared on the basis of possible DC microgrid configurations, redundancy, different DC voltage levels....

Growth and physiological characteristics of the weed false johnsongrass ( Sorghum arundinaceum (Desv. Stapf

Directory of Open Access Journals (Sweden)

Deborah Amorim Martins

2016-02-01

Full Text Available ABSTRACT Sorghum arundinaceum (Desv. Stapf is a weed that belongs to the Poaceae family and is widespread throughout Brazil. Despite the frequent occurrence, infesting cultivated areas, there is little research concerning the biology and physiology of this species. The objective of this research was to evaluate the growth, carbon partitioning and physiological characteristics of the weed Sorghum arundinaceum in greenhouse. Plants were collected at regular intervals of seven days, from 22 to 113 days after transplanting (DAT. In each sample, we determined plant height, root volume, leaf area and dry matter, and subsequently we perfomed the growth analysis, we have determined the dry matter partitioning among organs, the accumulation of dry matter, the specific leaf area, the relative growth rate and leaf weight ratio. At 36, 78 and 113 DAT, the photosynthetic and transpiration rates, stomatal conductance, CO2 concentration and chlorophyll fluorescence were evaluated. The Sorghum arundinaceum reached 1.91 in height, with slow initial growth and allocated much of the biomass in the roots. The photosynthetic rate and the maximum quantum yield of FSII are similar throughout the growth cycle. At maturity the Sorghum arundinaceum presents higher values of transpiration rate, stomatal conductance and non-photochemical quenching coefficient (NPQ.

Ação e caracterização química de óleos essenciais no manejo da antracnose do maracujá

Directory of Open Access Journals (Sweden)

César Fernandes Aquino

2012-12-01

Full Text Available Objetivou-se avaliar dois métodos de inoculação de Colletotrichum gloeosporioides em maracujá, testar a patogenicidade de diferentes isolados, o efeito fungitóxico e a composição química dos óleos essenciais das espécies medicinais alecrim-pimenta (Lippia sidoides Cham., capim-santo [Cymbopogon citratus (D. C. Stapf.], alfavaca-cravo (Ocimum gratissimum L., no controle da antracnose [Colletotrichum gloeosporioides (Penz.], associado ao estádio de maturação de frutos de maracujazeiro-amarelo. Avaliaram-se três experimentos, onde se testou a patogenicidade de seis isolados do fungo em delineamento inteiramente casualizado, com seis repetições, outro com o mesmo delineamento em esquema fatorial 2x2 (suspensão de conídios e disco de micélio e frutos (verdes e maduros, com seis repetições. No tratamento com frutos, utilizou-se o delineamento inteiramente casualizado, em esquema fatorial 5x3+1, sendo cinco concentrações (0; 2; 4; 6 e 8µL mL-1 e três espécies medicinais, mais o tebuconazol, com cinco repetições. Fez-se a caracterização química dos óleos por cromatografia gasosa, com espectrometria de massas. Todos os isolados foram patogênicos. Os frutos maduros apresentaram maior diâmetro das lesões, quando inoculados com suspensão de conídios. O óleo de C. citratus proporcionou o menor diâmetro das lesões nos frutos, até a concentração de 6 µL mL-1. Na concentração de 8 µL mL-1, todos os óleos inibiram o desenvolvimento do fungo. O timol (30,24%, o citral (77,74% e o eugenol (92,89% foram componentes majoritários em L. sidoides, C. citratus e O. gratissimum, respectivamente.

DC to DC power converters and methods of controlling the same

Science.gov (United States)

Steigerwald, Robert Louis; Elasser, Ahmed; Sabate, Juan Antonio; Todorovic, Maja Harfman; Agamy, Mohammed

2012-12-11

A power generation system configured to provide direct current (DC) power to a DC link is described. The system includes a first power generation unit configured to output DC power. The system also includes a first DC to DC converter comprising an input section and an output section. The output section of the first DC to DC converter is coupled in series with the first power generation unit. The first DC to DC converter is configured to process a first portion of the DC power output by the first power generation unit and to provide an unprocessed second portion of the DC power output of the first power generation unit to the output section.

Hierarchical Velocity Control Based on Differential Flatness for a DC/DC Buck Converter-DC Motor System

Directory of Open Access Journals (Sweden)

R. Silva-Ortigoza

2014-01-01

Full Text Available This paper presents a hierarchical controller that carries out the angular velocity trajectory tracking task for a DC motor driven by a DC/DC Buck converter. The high level control is related to the DC motor and the low level control is dedicated to the DC/DC Buck converter; both controls are designed via differential flatness. The high level control provides a desired voltage profile for the DC motor to achieve the tracking of a desired angular velocity trajectory. Then, a low level control is designed to ensure that the output voltage of the DC/DC Buck converter tracks the voltage profile imposed by the high level control. In order to experimentally verify the hierarchical controller performance, a DS1104 electronic board from dSPACE and Matlab-Simulink are used. The switched implementation of the hierarchical average controller is accomplished by means of pulse width modulation. Experimental results of the hierarchical controller for the velocity trajectory tracking task show good performance and robustness against the uncertainties associated with different system parameters.

An Integrated Multifunctional Bidirectional AC/DC and DC/DC Converter for Electric Vehicles Applications

OpenAIRE

Liwen Pan; Chengning Zhang

2016-01-01

This paper presents an on-board vehicular battery charger that integrates bidirectional AC/DC converter and DC/DC converter to achieve high power density for application in electric vehicles (EVs). The integrated charger is able to transfer electrical energy between the battery pack and the electric traction system and to function as an AC/DC battery charger. The integrated charger topology is presented and the design of passive components is discussed. The control schemes are developed for m...

PENGGUNAAN FUZZY LOGIC UNTUK KONTROL PARALLEL CONVERTER DC-DC

Directory of Open Access Journals (Sweden)

Bambang Prio Hartono

2012-09-01

Full Text Available Abstract: Using system fuzzy logic as control  technology have been used on low load dc-dc converter with combined parallel compiled  dc-dc converter can  obtain big load.   With existence of differrence of component parameter and each parallel compiled converter can obtained different current  and voltage output.  Function of controller  for to do adjustment, so that current which is applied  to  load by each converter  can be obtained  difference error as small as possible or same. The object of research is developing design of large signal dc-dc converter which is  combined with using  FLC so that  obtain  better performance.  To get better performance have been made plant model and simulation with CDE method.  The more systematic  system and design is needed to overcome bigger load  on dc-dc converter, so that parallel  compiled current master slave control system on dc-dc converter with using fuzzy logic  controller is used. Result of  research showed that error or difference of  current  which is applied to load can handled by fuzzy logic  controller.  Technic of current and voltage controller co to do adjustment current and voltage distribution  equally to load.  Distribution of iL1,iL2 and  output voltage Vo on dc-dc  converter with load 2,25 until  7,875 and voltage  100  until 120 volt,  load current beetwen  12 until 48, % relatif  error  Vo  0,4% until  0,9%.

[Anti-Candida albicans activity of essential oils including Lemongrass (Cymbopogon citratus) oil and its component, citral].

Science.gov (United States)

Abe, Shigeru; Sato, Yuichi; Inoue, Shigeharu; Ishibashi, Hiroko; Maruyama, Naho; Takizawa, Toshio; Oshima, Haruyuki; Yamaguchi, Hideyo

2003-01-01

The effects of 12 essential oils, popularly used as antifungal treatments in aromatherapy, on growth of Candida albicans were investigated. Mycelial growth of C. albicans, which is known to give the fungus the capacity to invade mucosal tissues, was inhibited in the medium containing 100 micro g/ml of the oils: lemongrass (Cymbopogon citratus), thyme (Thymus vulgaris), patchouli (Pogostemon cablin) and cedarwood (Cedrus atlantica). Not only lemongrass oil but also citral, a major component of lemongrass oil (80%), in the range of 25 and 200 micro g/ml inhibited the mycelial growth but allowed yeast-form growth. More than 200 micro g/ml of citral clearly inhibited both mycelial and yeast-form growth of C. albicans. These results provide experimental evidence suggesting the potential value of lemongrass oil for the treatment of oral or vaginal candidiasis.

Influência da luz e da temperatura sobre a oxidação do óleo essencial de capim-limão (Cymbopogon citratus (D.C.) Stapf)

OpenAIRE

Guimarães,Luiz Gustavo de L.; Cardoso,Maria das Graças; Zacaroni,Lidiany M.; Lima,Rafaela K. de; Pimentel,Flávio A.; Morais,Augusto R. de

2008-01-01

The identification of the chemical compounds of the essential oil was performed with a gas chromatograph coupled to a mass spectrometer. The oil was left in the presence and absence of light and submitted to different temperatures to evaluate its stability. The yields of the major compounds were evaluated every fifteen days. Citral and myrcene, the major compounds of the essential oil, were degraded over time in both the presence and absence of light, but temperature only influenced the degra...

Full range ZVS DC-DC converter

International Nuclear Information System (INIS)

Upadhyay, Rinki; Badapanda, M.K.; Hannurkar, P.R.

2011-01-01

A 500 V, 24 Amp DC-DC converter with digital signal processor (DSP) based control and protection has been designed, fabricated and tested. Its power circuit consists of IGBT based single phase inverter bridge, ferrite transformer and diode rectifier. All IGBTs in the inverter bridge are operated in zero voltage switching (ZVS) mode to minimize switching losses thereby increasing the efficiency of the converter significantly. The efficiency of this converter is measured to be greater than 97% at full load. In a conventional full bridge inverter, typically ZVS is achieved under full load condition while at light load ZVS is lost. An auxiliary LC circuit has been intentionally incorporated in this converter to achieve ZVS even at light loaded conditions. Detailed simulation of the converter circuit is carried out and crucial waveforms have been presented in this paper. Microchip make dsPIC30F2020 DSP is employed to provide phase shifted PWMs to IGBTs in the inverter bridge. All the crucial parameters are also monitored by this DSP and in case of any unfavorable conditions, the converter is tripped off. Suitable experiments were carried out in this DC-DC converter under different loaded conditions and a close match between the simulated and experimental results were obtained. Such DC-DC converters can be connected in series or parallel for the development of solid state modular power supplies for various applications. (author)

TOPOLOGICAL REVIEW AND ANALYSIS OF DC-DC BOOST CONVERTERS

Directory of Open Access Journals (Sweden)

V. INDRA GANDHI

2017-06-01

Full Text Available DC voltage boost up is essential in numerous applications; especially considering Photovoltaic (PV based renewable power generation system. The conventional DC-DC boost converter is the most admired configuration for this scheme, even if the converter efficiency is restricted at duty cycle near to maximum value. In order to find solution to the problem and improve its conversion capability, many converter configurations have been implemented so far. With this circumstance, this research work proposes to give overview of a few most imperative research works related to DC-DC boost converters. Some configurations are covered and classified basically based on the application. The major benefits and disadvantages related to the available techniques are also briefly conveyed. At last, a proper evaluation is recognized among the important types of DC-DC boost converters in terms of efficiency, number of components, and stability.

DC/DC converters for integration of double-layer condensers in onboard power supply; DC/DC-Wandler zur Einbindung von Doppelschichtkondensatoren in das Fahrzeugenergiebordnetz

Energy Technology Data Exchange (ETDEWEB)

Polenov, Dieter

2010-01-15

The paper discusses DC/DC converters for integration of double layer condensers into the onboard power system. First, requirements on DC/DC converters are listed and compared on the basis of three exemplary applications. A DC/DC converter concept is developed for decoupling transient high-power loads like electric steering systems. Three different topologies are compared using a specially developed method in order to find the best solution for the given application. In order to establish adequate criteria for selecting the switching frequency and inductivities of storage throttles, the influence of the trottle power change on the switching characteristics of the MOSFETs and on certain ranges of EMP interference emissions is investigated. As methods of optimising the operation of the synchronous rectifiers, parallel connection of Schottky diodes and synchronous rectifiers as well as the variation of the shut-off dead times of synchronous rectifiers were investigated. Further, a concept for converter control was developed in consideration of the intended application and topology. Finally, selected aspects for implementation of the DC/DC converter concept are presented as well as the results of experimental investigations.

Chaos analysis and chaotic EMI suppression of DC-DC converters

CERN Document Server

Zhang, Bo

2014-01-01

Introduces chaos theory, its analytical methods and the means to apply chaos to the switching power supply design DC-DC converters are typical switching systems which have plenty of nonlinear behaviors, such as bifurcation and chaos. The nonlinear behaviors of DC-DC converters have been studied heavily over the past 20 years, yet researchers are still unsure of the practical application of bifurcations and chaos in switching converters. The electromagnetic interference (EMI), which resulted from the high rates of changes of voltage and current, has become a major design criterion in DC-DC co

Full wave dc-to-dc converter using energy storage transformers

Science.gov (United States)

Moore, E. T.; Wilson, T. G.

1969-01-01

Full wave dc-to-dc converter, for an ion thrustor, uses energy storage transformers to provide a method of dc-to-dc conversion and regulation. The converter has a high degree of physical simplicity, is lightweight and has high efficiency.

Pulsewidth modulated DC-to-DC power conversion circuits, dynamics, and control designs

CERN Document Server

Choi, Byungcho

2013-01-01

This is the definitive reference for anyone involved in pulsewidth modulated DC-to-DC power conversion Pulsewidth Modulated DC-to-DC Power Conversion: Circuits, Dynamics, and Control Designs provides engineers, researchers, and students in the power electronics field with comprehensive and complete guidance to understanding pulsewidth modulated (PWM) DC-to-DC power converters. Presented in three parts, the book addresses the circuitry and operation of PWM DC-to-DC converters and their dynamic characteristics, along with in-depth discussions of control design of PWM DC-to

Triple voltage dc-to-dc converter and method

Science.gov (United States)

Su, Gui-Jia

2008-08-05

A circuit and method of providing three dc voltage buses and transforming power between a low voltage dc converter and a high voltage dc converter, by coupling a primary dc power circuit and a secondary dc power circuit through an isolation transformer; providing the gating signals to power semiconductor switches in the primary and secondary circuits to control power flow between the primary and secondary circuits and by controlling a phase shift between the primary voltage and the secondary voltage. The primary dc power circuit and the secondary dc power circuit each further comprising at least two tank capacitances arranged in series as a tank leg, at least two resonant switching devices arranged in series with each other and arranged in parallel with the tank leg, and at least one voltage source arranged in parallel with the tank leg and the resonant switching devices, said resonant switching devices including power semiconductor switches that are operated by gating signals. Additional embodiments having a center-tapped battery on the low voltage side and a plurality of modules on both the low voltage side and the high voltage side are also disclosed for the purpose of reducing ripple current and for reducing the size of the components.

Switching coordination of distributed dc-dc converters for highly efficient photovoltaic power plants

Science.gov (United States)

Agamy, Mohammed; Elasser, Ahmed; Sabate, Juan Antonio; Galbraith, Anthony William; Harfman Todorovic, Maja

2014-09-09

A distributed photovoltaic (PV) power plant includes a plurality of distributed dc-dc converters. The dc-dc converters are configured to switch in coordination with one another such that at least one dc-dc converter transfers power to a common dc-bus based upon the total system power available from one or more corresponding strings of PV modules. Due to the coordinated switching of the dc-dc converters, each dc-dc converter transferring power to the common dc-bus continues to operate within its optimal efficiency range as well as to optimize the maximum power point tracking in order to increase the energy yield of the PV power plant.

The use of powder and essential oil of Cymbopogon citratus against mould deterioration and aflatoxin contamination of "egusi" melon seeds.

Science.gov (United States)

Bankole, S A; Joda, A O; Ashidi, J S

2005-01-01

Experiments were carried out to determine the potential of using the powder and essential oil from dried ground leaves of Cymbopogon citratus (lemon grass) to control storage deterioration and aflatoxin contamination of melon seeds. Four mould species: Aspergillus flavus, A. niger, A. tamarii and Penicillium citrinum were inoculated in the form of conidia suspension (approx. 10(6) conidia per ml) unto shelled melon seeds. The powdered dry leaves and essential oil from lemon grass were mixed with the inoculated seeds at levels ranging from 1-10 g/100 g seeds and 0.1 to 1.0 ml/100 g seeds respectively. The ground leaves significantly reduced the extent of deterioration in melon seeds inoculated with different fungi compared to the untreated inoculated seeds. The essential oil at 0.1 and 0.25 ml/100 g seeds and ground leaves at 10 g/100 g seeds significantly reduced deterioration and aflatoxin production in shelled melon seeds inoculated with toxigenic A. flavus. At higher dosages (0.5 and 1.0 ml/100 g seeds), the essential oil completely prevented aflatoxin production. After 6 months in farmers' stores, unshelled melon seeds treated with 0.5 ml/ 100 g seeds of essential oil and 10 g/100 g seeds of powdered leaves of C. citratus had significantly lower proportion of visibly diseased seeds and Aspergillus spp. infestation levels and significantly higher seed germination compared to the untreated seeds. The oil content, free fatty acid and peroxide values in seeds protected with essential oil after 6 months did not significantly differ from the values in seeds before storage. The efficacy of the essential oil in preserving the quality of melon seeds in stores was statistically at par with that of fungicide (iprodione) treatment. ((c) 2005 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim).

The performance of the DC motor by the PID controlling PWM DC-DC boost converter

OpenAIRE

Can, Erol; Sayan, Hasan Hüseyin

2017-01-01

This paper presents the PID controlling direct current (DC) to the direct current boost converter feds DC motor which has a 3.68 kW and 240 V of DC voltage input on its characteristics. What is first formed is the boost converter mathematical model at the design stage. Secondly, a mathematical model of the DC motor is created so that the boost converter with the machine can be established and modeled at the Matlab Simulink. The PID controller is considered for arranging a pulse width modulati...

Cymbopogon citratus industrial waste as a potential source of bioactive compounds.

Science.gov (United States)

Tavares, Filipa; Costa, Gustavo; Francisco, Vera; Liberal, Joana; Figueirinha, Artur; Lopes, Maria Celeste; Cruz, Maria Teresa; Batista, Maria Teresa

2015-10-01

Cymbopogon citratus (Cc), commonly known as lemongrass, is a very important crop worldwide, being grown in tropical countries. It is widely used in the food, pharmaceutical, cosmetic and perfumery industries for its essential oil. Cc aqueous extracts are also used in traditional medicine. They contain high levels of polyphenols, which are known for their antioxidant and anti-inflammatory properties. Hydrodistillation of lemongrass essential oil produces an aqueous waste (CcHD) which is discarded. Therefore a comparative study between CcHD and Cc infusion (CcI) was performed to characterize its phytochemical profile and to research its antioxidant and anti-inflammatory potential. HPLC-PDA/ESI-MS(n) analysis showed that CcI and CcHD have similar phenolic profiles, with CcHD presenting a higher amount of polyphenols. Additionally, both CcI and CcHD showed antioxidant activity against DPPH (EC50 of 41.72 ± 0.05 and 42.29 ± 0.05 µg mL(-1) respectively) and strong anti-inflammatory properties, by reducing NO production and iNOS expression in macrophages and through their NO-scavenging activity, in a dose-dependent manner. Furthermore, no cytotoxicity was observed. The data of this study encourage considering the aqueous solution from Cc leaf hydrodistillation as a source of bioactive compounds, which may add great industrial value to this crop. © 2014 Society of Chemical Industry.

On and off controlled resonant dc-dc power converter

DEFF Research Database (Denmark)

2015-01-01

The present invention relates to a resonant DC-DC power converter comprising an input side circuit comprising a positive and a negative input terminal for receipt of an input voltage or current and an output side circuit comprising positive and negative output terminals for supply of a converter...... output voltage and connection to a converter load. The resonant DC-DC power converter further comprises a rectification circuit connected between an output of a resonant network and the output side circuit. The resonant network is configured for alternatingly being charged from the input voltage...... or current and discharged through the rectification circuit by a first controllable switch arrangement in accordance with a first switch control signal. A second controllable switch arrangement of the resonant DC-DC power converter is configured to select a first impedance characteristic of the resonant...

The Topologies Research of a Soft Switching Bidirectional DC/DC Converter

DEFF Research Database (Denmark)

Zhang, Qi; Zhang, Yongping; Sun, Xiangdong

2017-01-01

A soft-switching solution implemented to the traditional bidirectional DC/DC converter is developed. The soft-switching cell, which composed of three auxiliary switches, one resonant capacitor and one resonant inductor, is equipped in the traditional bidirectional DC/DC converter to realize circuit...... circle. And the proposed topology of bidirectional soft-switching dc-dc converter(TASBC) performs ideal soft switching at boost operations. The characteristics of the proposed converter has been verified by MATLAB simulations and experimental results....

75 FR 27401 - Airworthiness Directives; McDonnell Douglas Corporation Model DC-9-30, DC-9-40, and DC-9-50...

Science.gov (United States)

2010-05-17

... Airworthiness Directives; McDonnell Douglas Corporation Model DC- 9-30, DC-9-40, and DC-9-50 Series Airplanes... airworthiness directive (AD) for certain Model DC-9-30, DC-9-40, and DC-9-50 series airplanes. This AD requires... this AD to detect and correct the potential for an arc/spark condition to occur within the fuel boost...

A Feed-Forward Control Realizing Fast Response for Three-Branch Interleaved DC-DC Converter in DC Microgrid

Directory of Open Access Journals (Sweden)

Haojie Wang

2016-07-01

Full Text Available It is a common practice for storage batteries to be connected to DC microgrid buses through DC-DC converters for voltage support on islanded operation mode. A feed-forward control based dual-loop constant voltage PI control for three-branch interleaved DC-DC converters (TIDC is proposed for storage batteries in DC microgrids. The working principle of TIDC is analyzed, and the factors influencing the response rate based on the dual-loop constant voltage control for TIDC are discussed, and then the method of feed-forward control for TIDC is studied to improve the response rate for load changing. A prototype of the TIDC is developed and an experimental platform is built. The experiment results show that DC bus voltage sags or swells caused by load changing can be reduced and the time for voltage recovery can be decreased significantly with the proposed feed-forward control.

A Feed-Forward Control Realizing Fast Response for Three-Branch Interleaved DC-DC Converter in DC Microgrid

DEFF Research Database (Denmark)

Wang, Haojie; Han, Minxiao; Yan, Wenli

2016-01-01

It is a common practice for storage batteries to be connected to DC microgrid buses through DC-DC converters for voltage support on islanded operation mode. A feed-forward control based dual-loop constant voltage PI control for three-branch interleaved DC-DC converters (TIDC) is proposed...... for storage batteries in DC microgrids. The working principle of TIDC is analyzed, and the factors influencing the response rate based on the dual-loop constant voltage control for TIDC are discussed, and then the method of feed-forward control for TIDC is studied to improve the response rate for load...... changing. A prototype of the TIDC is developed and an experimental platform is built. The experiment results show that DC bus voltage sags or swells caused by load changing can be reduced and the time for voltage recovery can be decreased significantly with the proposed feed-forward control....

Using PBL to Improve Educational Outcomes and Student Satisfaction in the Teaching of DC/DC and DC/AC Converters

Science.gov (United States)

Martinez-Rodrigo, Fernando; Herrero-De Lucas, Luis Carlos; de Pablo, Santiago; Rey-Boue, Alexis B.

2017-01-01

This paper examines the question of how to use project-based learning to increase student performance and satisfaction in a power electronics course addressing the topics of dc/dc and dc/ac converters, the assembly of a dc/dc converter, and the use of a commercial speed drive. A detailed presentation of the methodology is shown, and the results…

Improved Control Strategy for T-type Isolated DC/DC Converters

DEFF Research Database (Denmark)

Liu, Dong; Deng, Fujin; Wang, Yanbo

2017-01-01

T-type isolated DC/DC converters have recently attracted attention due to their numerous advantages, including few components, low cost, and symmetrical operation of transformers. This study proposes an improved control strategy for increasing the efficiency of T-type isolated DC/DC converters....... Under the proposed strategy, the primary circulating current flows through the auxiliary switches (metal–oxide–semiconductor field-effect transistors) instead of their body diodes in free-wheeling periods. Such feature can reduce conduction losses, thereby improving the efficiency of T-type isolated DC...

High power density dc/dc converter: Selection of converter topology

Science.gov (United States)

Divan, Deepakraj M.

1990-01-01

The work involved in the identification and selection of a suitable converter topology is described. Three new dc/dc converter topologies are proposed: Phase-Shifted Single Active Bridge DC/DC Converter; Single Phase Dual Active Bridges DC/DC Converter; and Three Phase Dual Active Bridges DC/DC Converter (Topology C). The salient features of these topologies are: (1) All are minimal in structure, i.e., each consists of an input and output bridge, input and output filter and a transformer, all components essential for a high power dc/dc conversion process; (2) All devices of both the bridges can operate under near zero-voltage conditions, making possible a reduction of device switching losses and hence, an increase in switching frequency; (3) All circuits operate at a constant frequency, thus simplifying the task of the magnetic and filter elements; (4) Since, the leakage inductance of the transformer is used as the main current transfer element, problems associated with the diode reverse recovery are eliminated. Also, this mode of operation allows easy paralleling of multiple modules for extending the power capacity of the system; (5) All circuits are least sensitive to parasitic impedances, infact the parasitics are efficently utilized; and (6) The soft switching transitions, result in low electromagnetic interference. A detailed analysis of each topology was carried out. Based on the analysis, the various device and component ratings for each topology operating at an optimum point, and under the given specifications, are tabulated and discussed.

An Integrated Multifunctional Bidirectional AC/DC and DC/DC Converter for Electric Vehicles Applications

Directory of Open Access Journals (Sweden)

Liwen Pan

2016-06-01

Full Text Available This paper presents an on-board vehicular battery charger that integrates bidirectional AC/DC converter and DC/DC converter to achieve high power density for application in electric vehicles (EVs. The integrated charger is able to transfer electrical energy between the battery pack and the electric traction system and to function as an AC/DC battery charger. The integrated charger topology is presented and the design of passive components is discussed. The control schemes are developed for motor drive system and battery-charging system with a power pulsation reduction circuit. Simulation results in MATLAB/Simulink and experiments on a 30-kW motor drive and 3.3-kW AC/DC charging prototype validate the performance of the proposed technology. In addition, power losses, efficiency comparison and thermal stress for the integrated charger are illustrated. The results of the analyses show the validity of the advanced integrated charger for electric vehicles.

RESONANT STEP-DOWN DC-DC POWER CONVERTERS

DEFF Research Database (Denmark)

2015-01-01

The present invention relates to a resonant step-down DC-DC power converter which comprises a primary side circuit and a secondary side circuit coupled through a galvanic isolation barrier. The primary side circuit comprises a positive and a negative input terminal for receipt of an input voltage...... charged from the input voltage and discharged to the output capacitor through the galvanic isolation barrier by a semiconductor switch arrangement in accordance with a switch control signal to produce the converter output voltage. The resonant step-down DC-DC power converter comprises an electrical short......-circuit connection across the galvanic isolation barrier connecting, in a first case, the second negative electrode of the output capacitor to the positive input terminal of the primary side circuit or, in a second case, connecting the second positive electrode of the output capacitor to the negative input terminal...

Atmel Microcontroller Based Soft Switched PWM ZVS Full Bridge DC to DC Converter

Directory of Open Access Journals (Sweden)

DEEPAK KUMAR NAYAK

2010-12-01

Full Text Available This paper deals with the simulation and implementation of soft switched PWM ZVS full bridge DC to DC converter. The 48V DC is efficiently reduced to 12V DC using a DC to DC converter. This converter has advantages like reduced switching losses, stresses and EMI. Input DC is converted into high frequency AC and it is stepped down to 12V level. Later it is rectified using a full wave rectifier. Laboratory model of microcontroller based DC to DC converter is fabricated and tested. The experimental results are compared with the simulation results.

Quasi-Z-Source Half-Bridge DC-DC Converter for Photovoltaic Applications

OpenAIRE

Vinnikov, D; Chub, A; Husev, O; Zaķis, J

2015-01-01

This paper presents a novel quasi-Z-source halfbridge galvanically isolated DC-DC converter intended for the photovoltaic applications. The topology could be envisioned as an alternative to the boost half-bridge DC-DC converter but the benefit of its symmetric structure reduces the threat of transformer saturation due to the dc flux. The proposed converter features the continuous input current and could be used either with one or two input voltage sources.

DC motor operation controlled from a DC/DC power converter in pulse mode with low duty cycle

OpenAIRE

Stefanov, Goce; Kukuseva, Maja; Citkuseva Dimitrovska, Biljana

2016-01-01

In this paper pulse mode of operation of DC motor controlled by DC/DC power converter is analyzed. DC motor operation with time intervals in which the motor operates without output load is of interest. In this mode it is possible the motor to restore energy. Also, in the paper are represented calculations for the amount of the restored energy in the pulse mode operation of the motor for different duty cycles.

Influence of metals on essential oil content and composition of lemongrass (Cymbopogon citratus (D.C.) Stapf.) grown under different levels of red mud in sewage sludge amended soil.

Science.gov (United States)

Gautam, Meenu; Agrawal, Madhoolika

2017-05-01

Lemongrass is a commercially important perennial herb with medicinal value and ability to tolerate high alkaline and saline conditions. Essential oil bearing plants can grow safely in soil contaminated with heavy metals without severe effects on morphology and oil yield. The present study was aimed to assess the essential oil content and composition in lemongrass in response to elevated metals in above-ground plant parts. Pot experiment was conducted for six months using sewage sludge as soil amendment (soil: sludge: 2:1 w/w) followed by red mud treatments (0, 5, 10 and 15% w/w). Garden soil without sludge and red mud was control and there were ten replicates of each treatment. Oil content in leaves was differently affected due to presence of metals in soil under different treatments. Oil content under S RM5 (5% red mud) treatment was raised by 42.9 and 11.5% compared to the control and S RM0 treatment, respectively. Among identified compounds in oil under red mud treatments, 17 compounds contributed more than 90% of total volatiles (citral contributing approximately 70%). Under S RM10 treatment, essential oil showed maximum citral content (75.3%). Contents of Fe, Zn, Cu, Cd, Ni and Pb in above-ground plant parts exceeded, whereas Mn was detected within WHO permissible limits for medicinal plants. However, metal contents in essential oil were well within FSSAI limits for food. The study suggests utilization of 5 and 10% red mud in sludge amended soil for lemongrass cultivation to have better oil yield and quality, without metal contamination. Copyright © 2017 Elsevier Ltd. All rights reserved.

Proline accumulation in lemongrass (Cymbopogon flexuosus Stapf.) due to heavy metal stress.

Science.gov (United States)

Handique, G K; Handique, A K

2009-03-01

Toxic heavy metals viz. lead, mercury and cadmium induced differential accumulation of proline in lemongrass (Cymbopogon flexuosus Stapf.) grown in soil amended with 50, 100, 200, 350 and 500 mg kg(-1) of the metals have been studied. Proline accumulation was found to be metal specific, organ specific and linear dose dependant. Further, proline accumulation following short term exposure (two months after transplantation) was higher than long term exposure (nine months after transplantation). Proline accumulation following short term exposure was 2.032 to 3.839 micro moles g(-1) for cadmium (50-200 mg kg(-1)); the corresponding range for mercury was 1.968 to 5.670 micro moles g(-1) and 0.830 to 4.567 micro moles g(-1) for lead (50-500 mg kg(-1) for mercury and lead). Proline accumulation was consistently higher in young tender leaf than old leaf, irrespective of the metal or duration of exposure. For cadmium treatment proline level was 2.032 to 3.839 micro moles g(-1) for young leaves while the corresponding value for old leaf was 1.728 to 2.396 micro moles g(-1) following short term exposure. The same trend was observed for the other two metals and duration of exposure. For control set proline accumulation in root was 0.425 micro moles g(-1) as against 0.805 and 0.533 micro moles g(-1) in young and old leaves respectively indicating that proline accumulation in root are lower than leaves, under both normal and stressed condition.

Control of the DC-DC Converter used into Energy Generation System

International Nuclear Information System (INIS)

Bizon, Nicu; Oproescu, Mihai

2006-01-01

This paper presents an investigation of the DC-DC Converter controller used into Energy Generation System. The full bridge is used into an Energy Generation System (EGS) as second power interface between the energy source and the high DC bus. The simulation results show that the DC-DC Converter behavior can be improved using a well designed PI control surface. The used Simulink models for the EGS blocks and some design considerations are presented, too. (authors)

Inhibitory effect of formulated lemongrass shampoo on Malassezia furfur: a yeast associated with dandruff.

Science.gov (United States)

Wuthi-Udomlert, Mansuang; Chotipatoomwan, Ployphand; Panyadee, Sasikan; Gritsanapan, Wandee

2011-03-01

Lemongrass (Cymbopogon citratus Stapf) has been used in cooking and in many traditional medicines; the essential oil contains citral as a major constituent. This study evaluated the antifungal activity of lemongrass oil against Malassezia furfur, an opportunistic yeast associated with dandruff, by using a broth dilution assay. From the minimum fungicidal concentration (MFC) obtained, the oil was then incorporated at different percentages into shampoo formulations. The formulated shampoos were kept at room temperature (28 degrees-30 degrees C) and under accelerated condition (45 degrees C). At the end of the first and sixth weeks, after preparation, all formulations were tested again and the appearance was recorded. Selection of an appropriate formula was based on antifungal activity against M. furfur, the physical appearance, the chemical properties and stability of the formula. Two percent lemongrass oil shampoo provided the required qualities necessary for commercial use. After being kept for 6 weeks at 28 degrees-30 degrees C and 45 degrees C, this formulated shampoo gave MFCs against M. furfur of 75 microl/ml and 18.75 microl/ml, respectively.

Fumigant toxicity of plant essential oils against Camptomyia corticalis (Diptera: Cecidomyiidae).

Science.gov (United States)

Kim, Jun-Ran; Haribalan, Perumalsamy; Son, Bong-Ki; Ahn, Young-Joon

2012-08-01

The toxicity of 98 plant essential oils against third instars of cecidomyiid gall midge Camptomyia corticalis (Loew) (Diptera: Cecidomyiidae) was examined using a vapor-phase mortality bioassay. Results were compared with that of a conventional insecticide dichlorvos. Based on 24-h LC50 values, all essential oils were less toxic than dichlorvos (LC50, 0.027 mg/cm3). The LC50 of caraway (Carum carvi L.) seed, armoise (Artemisia vulgaris L.), clary sage (Salvia sclarea L.), oregano (Origanum vulgare L.), lemongrass [Cymbopogon citratus (DC.) Stapf], niaouli (Melaleuca viridiflora Gaertner), spearmint (Mentha spicata L.), cassia especial (Cinnamomum cassia Nees ex Blume), Dalmatian sage (Salvia offcinalis L.), red thyme (Thymus vulgaris L.), bay [Pimenta racemosa (P. Mill.) J.W. Moore], garlic (Allium sativum L.), and pennyroyal (Mentha pulegium L.) oils is between 0.55 and 0.60 mg/cm3. The LC50 of cassia (C. cassia, pure and redistilled), white thyme (T. vulgaris), star anise (Illicium verum Hook.f.), peppermint (Mentha X piperita L.), wintergreen (Gaultheria procumbens L.), cinnamon (Cinnamomum zeylanicum Blume) bark, sweet marjoram (Origanum majorana L.), Roman chamomile [Chamaemelum nobile (L.) All.], eucalyptus (Eucalyptus globulus Labill.), rosemary (Rosmarinus officinalis L.),Virginian cedarwood (Juniperus virginiana L.), pimento berry [Pimenta dioica (L.) Merr.], summer savory (Satureja hortensis L.), lavender (Lavandula angustifolia Mill.), and coriander (Coriandrum sativum L.) oils is between 0.61 and 0.99 mg/cm3. All other essential oils tested exhibited low toxicity to the cecidomyiid larvae (LC50, >0.99 mg/cm3). Global efforts to reduce the level of highly toxic synthetic insecticides in the agricultural environment justify further studies on the active essential oils as potential larvicides for the control of C. corticalis populations as fumigants with contact action.

Aprendizagem e memória de Telenomus podisi (Hymenoptera, Platygastridae

Directory of Open Access Journals (Sweden)

Roberta Tognon

2013-09-01

Full Text Available O parasitoide de ovos Telenomus podisi Ashmead, 1893 é um importante agente de controle natural de percevejos e seu sucesso de parasitismo está associado à habilidade para a localização do hospedeiro, sendo a aprendizagem e a memória um dos fatores que podem influenciar esta interação. O trabalho avaliou a capacidade de aprendizagem e tempo de retenção da memória de T. podisi ao extrato de capim-limão [Cymbopogon citratus (DC. Stapf. (Poales, Poaceae], em diferentes estágios do desenvolvimento da fase imatura. Ovos de Euschistus heros (Fabricius, 1798 (Hemiptera, Pentatomidae parasitados por T. podisi foram individualizados em tubos de vidro contendo papel filtro com extrato de capim-limão ou solvente acetona (controle e mantidos em diferentes estágios do desenvolvimento jovem dos parasitoides. Após a emergência, fêmeas de T. podisi foram testadas em olfatômetro tipo "Y" aos odores de ambos tratamentos. Fêmeas inexperientes foram submetidas aos mesmos odores das experientes. Para avaliar a memória, fêmeas oriundas de ovos que permaneceram em contato com o extrato de capim-limão por todo o desenvolvimento do estágio imaturo, foram testadas, após 24, 48, 72 e 96 horas de idade ao odor de capim-limão e acetona. Fêmeas que permaneceram em contato com o capim-limão por toda a fase jovem, direcionaram-se preferencialmente para este extrato, diferente das inexperientes ou das expostas à acetona, as quais preferiram o solvente. A presença do capim-limão, durante todo o estágio do desenvolvimento imaturo, alterou a orientação quimiotáxica de T. podisi, desencadeando aprendizagem nestes organismos, a qual se manteve por até 72 horas.

Plantas medicinais utilizadas pela população do município de Lagarto- SE, Brasil – ênfase em pacientes oncológicos

Directory of Open Access Journals (Sweden)

N.L.B. CAETANO

2015-01-01

Full Text Available RESUMO A utilização de plantas com fins medicinais é uma das mais antigas formas de prática medicinal da humanidade. Entretanto, o conceito de “natural” contribui para o pensamento popular e errôneo de que Plantas Medicinais (PM são sinônimos de produtos seguros, o qual pode ocasionar no desenvolvimento de efeitos adversos ou interações medicamentosas. Neste contexto, foi realizado levantamento etnofarmacológico das Plantas Medicinais (PM utilizadas no município de Lagarto, SE, Brasil, com ênfase de seu uso por pacientes oncológicos. Um total de 706 moradores foram entrevistados. Foram citadas 80 plantas, das quais 57 foram identificadas em nosso laboratório. O uso de plantas medicinais (MP para fins terapêuticos foi relatada por 336 (47,65% entrevistados. As MPs mais utilizados foram: Erva-Cidreira (Lippiaalba (Mill N. E. Brown - 103, 30,8%, Boldo (Plectranthus barbatus Andr. - 53, 15,7%, e Capim-Santo (Cymbopogon citratus (D.C. Stapf - 49, 14,6%. Dos entrevistados que relataram o uso de MPs, metade (360, 50,95% comunicaram ao médico, mas não receberam orientações específicas. As doenças crônicas mais comuns identificadas foram: hipertensão arterial (144, 20,34%, câncer (55, 7,81% e diabetes (41, 5,89%. Dos pacientes com câncer, cerca de 40% (22 relataram utilizar PMs concomitante com quimioterapia, dado alarmante, visto a possibilidade de interações medicamentosas entre PMs e antineoplásicos. Diante desses dados, foi observado o uso de PM pela população de Lagarto, SE, e por pacientes oncológicos dessa região, porém, sem os mesmos receberem orientações de um profissional qualificado.

Novel composite resonance DC-DC converter with voltage doubler rectifier

OpenAIRE

Kato, Hisatsugu; Matsuo, Hirohumi; Eguchi, Masaki; Sakamoto, Yukitaka; Nakaishi, Masaki

2009-01-01

This paper deals with a novel composite resonance DC-DC converter with the voltage doubler rectifier, which is developed to be applied to the power conditioner of the photovoltaic generation system. The proposed DC-DC converter has the current and voltage resonance functions. Therefore, the output voltage regulation can be achieved for the large variations of the input voltage and load. Also, this converter has the high power efficiency. The maximum power efficiency 96.1% can be realized.

Ultra-high Efficiency DC-DC Converter using GaN Devices

DEFF Research Database (Denmark)

Ramachandran, Rakesh

2016-01-01

properties of GaN devices can be utilized in power converters to make them more compact and highly efficient. This thesis entitled “Ultra-high Efficiency DC-DC Converter using GaN devices” focuses on achieving ultra-high conversion efficiency in an isolated dc-dc converter by the optimal utilization of Ga...... for many decades. However, the rate of improvement slowed as the silicon power materials asymptotically approached its theoretical bounds. Compared to Si, wideband gap materials such as Silicon Carbide (SiC) and Gallium Nitride (GaN) are promising semiconductors for power devices due to their superior...... in this thesis. Efficiency measurements from the hardware prototype of both the topologies are also presented in this thesis. Finally, the bidirectional operation of an optimized isolated dc-dc converter is presented. The optimized converter has achieved an ultra-high efficiency of 98.8% in both directions...

75 FR 61352 - Airworthiness Directives; McDonnell Douglas Corporation Model DC-10-30, DC-10-30F, DC-10-30F (KC...

Science.gov (United States)

2010-10-05

... Airworthiness Directives; McDonnell Douglas Corporation Model DC- 10-30, DC-10-30F, DC-10-30F (KC-10A and KDC-10...-13 McDonnell Douglas Corporation: Amendment 39-16448; Docket No. FAA-2010-0553; Directorate.... Applicability (c) This AD applies to McDonnell Douglas Corporation Model DC- 10-30, DC-10-30F, DC-10-30F (KC-10A...

Sliding-Mode Control of a Charger/Discharger DC/DC Converter for DC-Bus Regulation in Renewable Power Systems

Directory of Open Access Journals (Sweden)

Sergio Ignacio Serna-Garcés

2016-03-01

Full Text Available Stand-alone power systems based on renewable energy sources are used to replace generators based on fossil fuels. Those renewable power systems also require Energy Storage Devices (ESD interfaced by a charger/discharger power converter, which consist of a bidirectional DC/DC converter, and a DC bus. This paper proposes a single sliding-mode controller (SMC for the charger/discharger DC/DC converter to provide a stable DC bus voltage in any operation condition: charging or discharging the ESD, or even without any power exchange between the ESD and the DC bus. Due to the non-linear nature of the power converter, the SMC parameters are adapted on-line to ensure global stability in any operation condition. Such stability of the adaptive SMC is mathematically demonstrated using analytical expressions for the transversality, reachability and equivalent control conditions. Moreover, a design procedure for the adaptive SMC parameters is provided in order to ensure the dynamic response required for the correct operation of the load. Finally, simulations and experimental tests validate the proposed controller and design procedure.

Design and Analysis of Two-Phase Boost DC-DC Converter

OpenAIRE

Taufik Taufik; Tadeus Gunawan; Dale Dolan; Makbul Anwari

2010-01-01

Multiphasing of dc-dc converters has been known to give technical and economical benefits to low voltage high power buck regulator modules. A major advantage of multiphasing dc-dc converters is the improvement of input and output performances in the buck converter. From this aspect, a potential use would be in renewable energy where power quality plays an important factor. This paper presents the design of a 2-phase 200W boost converter for battery charging application. Analysis of results fr...

SCM Handbooks for dc-to-dc Converters

Science.gov (United States)

Lee, F.; Mohmoud, M.; Yu, Y.

1984-01-01

Two documents aid in design of control modules for dc-to-dc converters. Features of SCM include: Adaptive stability, power component stress limiting, implementation of various control laws, unified design approach. Analysis and quidelines contained in handbooks enable engineer to design SCM circuit and confidently predict resulting overall performance.

Isolated step-down DC -DC converter for electric vehicles

Science.gov (United States)

Kukovinets, O. V.; Sidorov, K. M.; Yutt, V. E.

2018-02-01

Modern motor-vehicle industrial sector is moving rapidly now towards the electricity-driving cars production, improving their range and efficiency of components, and in particular the step-down DC/DC converter to supply the onboard circuit 12/24V of electric vehicle from the high-voltage battery. The purpose of this article - to identify the best circuitry topology to design an advanced step-down DC/DC converters with the smallest mass, volume, highest efficiency and power. And this will have a positive effect on driving distance of electric vehicle (EV). On the basis of computational research of existing and implemented circuit topologies of step-down DC/DC converters (serial resonant converter, full bridge with phase-shifting converter, LLC resonant converter) a comprehensive analysis was carried out on the following characteristics: specific volume, specific weight, power, efficiency. The data obtained was the basis for the best technical option - LLC resonant converter. The results can serve as a guide material in the process of components design of the traction equipment for electric vehicles, providing for the best technical solutions in the design and manufacturing of converting equipment, self-contained power supply systems and advanced driver assistance systems.

75 FR 75872 - Airworthiness Directives; McDonnell Douglas Corporation Model DC-9-30, DC-9-40, and DC-9-50...

Science.gov (United States)

2010-12-07

... Airworthiness Directives; McDonnell Douglas Corporation Model DC- 9-30, DC-9-40, and DC-9-50 Series Airplanes...: We are adopting a new airworthiness directive (AD) for the McDonnell Douglas Corporation airplanes... to include an airworthiness directive (AD) that would apply to certain McDonnell Douglas Model DC-9...

A Component-Reduced Zero-Voltage Switching Three-Level DC-DC Converter

DEFF Research Database (Denmark)

Qin, Zian; Pang, Ying; Wang, Huai

2016-01-01

The basic Zero-Voltage Switching (ZVS) three-level DC-DC converter has one clamping capacitor to realize the ZVS of the switches, and two clamping diodes to clamp the voltage of the clamping capacitor. In order to reduce the reverse recovery loss of the diode as well as its cost, this paper...... proposes to remove one of the clamping diodes in basic ZVS three-level DC-DC converter. With less components, the proposed converter can still have a stable clamping capacitor voltage, which is clamped at half of the dc link voltage. Moreover, the ZVS performance will be influenced by removing the clamping...

Extrativismo, cultivo e privatização do jaborandi (Pilocarpus microphyllus Stapf ex Holm.; Rutaceae no Maranhão, Brasil Extractivism, cultivation and privatization of jaborandi (Pilocarpus microphyllus Stapf ex Holm.; Rutaceae in Maranhão, Brazil

Directory of Open Access Journals (Sweden)

Claudio Urbano B. Pinheiro

2002-04-01

Full Text Available Um dos processos associados com a expansão de fronteiras em países em desenvolvimento consiste na privatização de recursos naturais, anteriormente de uso comum por populações tradicionais. Em geral, a privatização não só conduz à degradação dos recursos como também ao empobrecimento de comunidades locais dependentes desses recursos. Um exemplo desta transformação está no Estado do Maranhão, especialmente em uma região conhecida como "Pré-Amazônia", onde o jaborandi (Pilocarpus microphyllus Stapf ex Holm.; Rutaceae, um recurso natural que beneficiava milhares de pessoas da zona rural, foi gradativamente privatizado. A expansão do mercado de pilocarpina (um alcalóide de extenso uso em oftalmologia nos últimos 30 anos, provocou crescimento descontrolado no extrativismo de folhas de jaborandi, conduzindo ao esgotamento e à ameaça de extinção das populações naturais deste recurso vegetal. Paralelamente, esta pressão sobre as populações naturais acelerou o processo de domesticação desta espécie e a sua privatização pela indústria farmacêutica. Este estudo teve como objetivo principal avaliar a exploração e cultivo do jaborandi no Maranhão, buscando o esclarecimento sobre os benefícios e malefícios econômicos, sociais e ambientais decorrentes da sua exploração. Os resultados obtidos mostram que, historicamente, não houve nenhum benefício significativo compartilhado entre a indústria farmacêutica e as populações envolvidas no extrativismo do jaborandi no Maranhão.A process associated with frontier expansion in developing countries is the privatization of natural resources formerly held in common by traditional populations. An example of this transformation comes from Maranhão State, in a region of mid-northern Brazil known as "Pre-Amazônia" (Pre-Amazon, where jaborandi (Pilocarpus microphyllus Stapf ex Holm.; Rutaceae, a plant resource that used to benefit thousands of rural poor, is being

Active pre-filters for dc/dc Boost regulators

Directory of Open Access Journals (Sweden)

Carlos Andrés Ramos-Paja

2014-05-01

Full Text Available This paper proposes an active pre-filter to mitigate the current harmonics generated by classical dc/dc Boost regulators, which generate current ripples proportional to the duty cycle. Therefore, high output voltage conditions, i.e., high voltage conversion ratios, produce high current harmonics that must be filtered to avoid damage or source losses. Traditionally, these current components are filtered using electrolytic capacitors, which introduce reliability problems because of their high failure rate. The solution introduced in this paper instead uses a dc/dc converter based on the parallel connection of the Boost canonical cells to filter the current ripples generated by the Boost regulator, improving the system reliability. This solution provides the additional benefits of improving the overall efficiency and the voltage conversion ratio. Finally, the solution is validated with simulations and experimental results.

Laboratory manual for pulse-width modulated DC-DC power converters

CERN Document Server

Kazimierczuk, Marian K

2015-01-01

Designed to complement a range of power electronics study resources, this unique lab manual helps students to gain a deep understanding of the operation, modeling, analysis, design, and performance of pulse-width modulated (PWM) DC-DC power converters.  Exercises focus on three essential areas of power electronics: open-loop power stages; small-signal modeling, design of feedback loops and PWM DC-DC converter control schemes; and semiconductor devices such as silicon, silicon carbide and gallium nitride. Meeting the standards required by industrial employers, the lab manual combines program

A Novel PPFHB Bidirectional DC-DC Converter for Supercapacitor Application

DEFF Research Database (Denmark)

Zhang, Zhe; Thomsen, Ole Cornelius; Andersen, Michael Andreas E.

2009-01-01

This paper presents a novel bidirectional DC-DC converter for the supercapacitor application. In the proposed converter, push-pull forward with half bridge (PPFHB) voltage doubler structure is used to reduce the number of the power switches and get higher voltage gain. Based on phase-shift modula......This paper presents a novel bidirectional DC-DC converter for the supercapacitor application. In the proposed converter, push-pull forward with half bridge (PPFHB) voltage doubler structure is used to reduce the number of the power switches and get higher voltage gain. Based on phase...

Decentralized Interleaving of Paralleled Dc-Dc Buck Converters: Preprint

Energy Technology Data Exchange (ETDEWEB)

Johnson, Brian B [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Rodriguez, Miguel [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Sinha, Mohit [University of Minnesota; Dhople, Sairaj [University of Minnesota; Poon, Jason [University of California at Berkeley

2017-09-01

We present a decentralized control strategy that yields switch interleaving among parallel connected dc-dc buck converters without communication. The proposed method is based on the digital implementation of the dynamics of a nonlinear oscillator circuit as the controller. Each controller is fully decentralized, i.e., it only requires the locally measured output current to synthesize the pulse width modulation (PWM) carrier waveform. By virtue of the intrinsic electrical coupling between converters, the nonlinear oscillator-based controllers converge to an interleaved state with uniform phase-spacing across PWM carriers. To the knowledge of the authors, this work represents the first fully decentralized strategy for switch interleaving of paralleled dc-dc buck converters.

CISH is induced during DC development and regulates DC-mediated CTL activation.

Science.gov (United States)

Miah, Mohammad Alam; Yoon, Cheol-Hee; Kim, Joonoh; Jang, Jinah; Seong, Young-Rim; Bae, Yong-Soo

2012-01-01

The cytokine inducible SH2-domain protein (CISH) is a well-known STAT5 target gene, but its role in the immune system remains uncertain. In this study, we found that CISH is predominantly induced during dendritic cell (DC) development from mouse bone marrow (BM) cells and plays a crucial role in type 1 DC development and DC-mediated CTL activation. CISH knockdown reduced the expression of MHC class I, co-stimulatory molecules and pro-inflammatory cytokines in BMDCs. Meanwhile, the DC yield was markedly enhanced by CISH knockdown via cell-cycle activation and reduction of cell apoptosis. Down-regulation of cell proliferation at the later stage of DC development was found to be associated with CISH-mediated negative feedback regulation of STAT5 activation. In T-cell immunity, OT-1 T-cell proliferation was significantly reduced by CISH knockdown in DCs, whereas OT-2 T-cell proliferation was not affected by CISH knockdown. CTLs generated by DC vaccination were also markedly reduced by CISH knockdown, followed by significant impairment of DC-based tumor immunotherapy. Taken together, our data suggest that CISH expression at the later stage of DC development triggers the shutdown of DC progenitor cell proliferation and facilitates DC differentiation into a potent stimulator of CTLs. Copyright © 2012 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

A Bidirectional Multi-Port DC-DC Converter Integrating Voltage Equalizer

DEFF Research Database (Denmark)

Chen, Jianfei; Hou, Shiying; Deng, Fujin

2015-01-01

A novel bidirectional multi-port dc-dc converter integrating voltage equalizer based on switched-capacitor voltage accumulator (SCVA) is proposed. It has two operating modes of charging and discharging for battery modules. All battery modules are connected in series indirectly and can be equalize...... battery modules with different voltages. Simulation results has shown the feasibility of the proposed converter.......A novel bidirectional multi-port dc-dc converter integrating voltage equalizer based on switched-capacitor voltage accumulator (SCVA) is proposed. It has two operating modes of charging and discharging for battery modules. All battery modules are connected in series indirectly and can be equalized...

A Current-Fed Isolated Bidirectional DC-DC Converter

DEFF Research Database (Denmark)

Sun, Xiaofeng; Wu, Xiaoying; Shen, Yanfeng

2017-01-01

This paper proposes a current-fed isolated bidirectional DC-DC converter (CF-IBDC) which has the advantages of wide input voltage range, low input current ripple, low conduction losses, and soft switching over the full operating range. Compared with conventional CF-IBDCs, the voltage spikes...

Bi-Directional DC-DC Converter for PHEV Applications

Energy Technology Data Exchange (ETDEWEB)

Abas Goodarzi

2011-01-31

Plug-In Hybrid Electric Vehicles (PHEV) require high power density energy storage system (ESS) for hybrid operation and high energy density ESS for Electric Vehicle (EV) mode range. However, ESS technologies to maximize power density and energy density simultaneously are not commercially feasible. The use of bi-directional DC-DC converter allows use of multiple energy storage, and the flexible DC-link voltages can enhance the system efficiency and reduce component sizing. This will improve fuel consumption, increase the EV mode range, reduce the total weight, reduce battery initial and life cycle cost, and provide flexibility in system design.

Determination of input/output characteristics of full-bridge AC/DC/DC converter for arc welding

OpenAIRE

Stefanov, Goce; Karadzinov, Ljupco; Sarac, Vasilija; Cingoski, Vlatko; Gelev, Saso

2016-01-01

This paper describes the design and practical implementation of AC/DC/DC converter in mode of arc welding. An analysis of the operation of AC/DC/DC converter and its input/output characteristics are determined with computer simulations. The practical part is consisted of AC/DC/DC converter prototype for arc welding with output power of 3 kW and switching frequency of 64 kHz. The operation of AC/DC/DC converter is validated with experimental measurements.

ITAR Free Commercial-of-the-Shelf DC/DC Converter

Science.gov (United States)

Denzinger, Wolfgang; Hintze, Thomas

2014-08-01

A commercial-of-the-shelf (COTS) DC/DC converter for digital space equipment has been developed by ASP under ESA contract with special emphasis on low cost, no use of ITAR listed EEE parts like Mosfets, minimum number of rad-hard digital IC's and a design tolerance against single event effects by appropriate filtering. However, the intention to qualify this discrete converter design for a low cost FM series production was difficult due to the high up-sceening cost of EEE-parts with one lot guarantee and minimum-by. To overcome this problem, in a next step a redesign of the DC/DC converter was performed with all semiconductors like bipolar transistors, rectifiers and zener diodes packaged into hybrids. With this approach it was possible to buy a high number of less expensive wafers or dies from one lot, to perform a lot acceptance test and to integrate the dies into hybrid packages with further up- screening for FM use. The semiconductors have been packaged into three signal hybrids with 44 pins and one power hybrid with 24 pins for the dissipating transistors and rectifiers. The design of the hybrids is such, that all integrated semiconductors can be tested individually. The qualification of four EQM DC/DC converters with different combinations of output voltages has been successfully performed and two FM's have been manufactured and tested.

Performance of 22.4-kW nonlaminated-frame dc series motor with chopper controller. [a dc to dc voltage converter

Science.gov (United States)

Schwab, J. R.

1979-01-01

Performance data obtained through experimental testing of a 22.4 kW traction motor using two types of excitation are presented. Ripple free dc from a motor-generator set for baseline data and pulse width modulated dc as supplied by a battery pack and chopper controller were used for excitation. For the same average values of input voltage and current, the motor power output was independent of the type of excitation. However, at the same speeds, the motor efficiency at low power output (corresponding to low duty cycle of the controller) was 5 to 10 percentage points lower on chopped dc than on ripple free dc. The chopped dc locked-rotor torque was approximately 1 to 3 percent greater than the ripple free dc torque for the same average current.

Inhibitory effect of three C-glycosylflavonoids from Cymbopogon citratus (Lemongrass) on human low density lipoprotein oxidation.

Science.gov (United States)

Orrego, Roxana; Leiva, Elba; Cheel, José

2009-09-30

This study assessed the inhibitory effect of three C-glycosylflavonoids from Cymbopogon citratus leaves--isoorientin (1), swertiajaponin (2) and isoorientin 2"-Orhamnoside (3)--on human LDL oxidation. Isolated LDL was incubated with compounds 1-3 and the kinetics of lipid peroxidation were assessed by conjugated diene and malondialdehyde-thiobarbituric acid reactive substances (MDA-TBARS) formation after addition of copper ions. Significant differences (p < 0.05) between the lag time phase of the control and the lag time phase in the presence of the compounds 1 (0.25 microM) and 2 (0.50 microM) were observed. After five hours of incubation all three compounds showed a significant inhibitory effect on MDA-TBARS formation with respect to the control. After six hours of incubation only compound 1 kept a remarkable antioxidant effect. This study demonstrates that isoorientin (1) is an effective inhibitor of in vitro LDL oxidation. As oxidative damage to LDL is a key event in the formation of atherosclerotic lesions, the use of this natural antioxidant may be beneficial to prevent or attenuate atherosclerosis.

Characterising and modelling extended conducted electromagnetic interference in densely packed DC-DC converter

CSIR Research Space (South Africa)

Grobler, Inus

2013-09-01

Full Text Available . The military specified DC-DC converters are applicable, spanning from 100 W handheld power managers up to 2 kW DC-DC battery chargers. Circuit layout high frequency effects as well as high frequency impedances of the power components were characterised...

A New Sliding Mode Controller for DC/DC Converters in Photovoltaic Systems

Directory of Open Access Journals (Sweden)

M. Sarvi

2013-01-01

Full Text Available DC/DC converters are widely used in many industrial and electrical systems. As DC/DC converters are nonlinear and time-variant systems, the application of linear control techniques for the control of these converters is not suitable. In this paper, a new sliding mode controller is proposed as the indirect control method and compared to a simple direct control method in order to control a buck converter in photovoltaic applications. The solar arrays are dependent power sources with nonlinear voltage-current characteristics under different environmental conditions (insolation and temperature. From this point of view, the DC/DC converter is particularly suitable for the application of the sliding mode control in photovoltaic application, because of its controllable states. Simulations are performed in Matlab/Simulink software. The simulation results are presented for a step change in reference voltage and input voltage as well as step load variations. The simulations results of proposed method are compared with the conventional PID controller. The results show the good performance of the proposed sliding mode controller. The proposed method can be used for the other DC/DC converter.

Very High Frequency Half Bridge DC/DC Converter

DEFF Research Database (Denmark)

Madsen, Mickey Pierre; Knott, Arnold; Andersen, Michael A. E.

2014-01-01

This paper presents the first, off chip, class DE (resonant half bridge) converter working in the Very High Frequency (VHF) range. The benefits of using half bridge circuits both in the inverter and rectifier part of a VHF resonant dc/dc converter are analyzed and design equations for all...

Sheppard-Taylor Isolated High Boost DC-DC Converter

DEFF Research Database (Denmark)

Chub, Andrii; Siwakoti, Yam Prasad; Vinnikov, Dmitri

2017-01-01

This paper presents a new galvanically isolated step-up dc-dc converter intended for low-power but high step-up applications. The proposed converter is capable of regulating output voltage within a wide range of the input voltage or load variations. In contrast to competitors, the converter can...

A DC-DC Conversion Powering Scheme for the CMS Phase-1 Pixel Upgrade

CERN Document Server

Feld, Lutz Werner; Marcel Friedrichs; Richard Hensch; Karpinski, Waclaw; Klein, Katja; Sammet, Jan Domenik; Wlochal, Michael

2012-01-01

The powering scheme of the CMS pixel detector will be described, and the performance of prototype DC-DC buck converters will be presented, including power efficiency, system tests with DC-DC converters and pixel modules, thermal management, reliability at low temperature, and studies of potential frequency locking betwe...

Study on the Control Algorithm of Two-Stage DC-DC Converter for Electric Vehicles

Directory of Open Access Journals (Sweden)

Changhao Piao

2014-01-01

Full Text Available The fast response, high efficiency, and good reliability are very important characteristics to electric vehicles (EVs dc/dc converters. Two-stage dc-dc converter is a kind of dc-dc topologies that can offer those characteristics to EVs. Presently, nonlinear control is an active area of research in the field of the control algorithm of dc-dc converters. However, very few papers research on two-stage converter for EVs. In this paper, a fixed switching frequency sliding mode (FSFSM controller and double-integral sliding mode (DISM controller for two-stage dc-dc converter are proposed. And a conventional linear control (lag is chosen as the comparison. The performances of the proposed FSFSM controller are compared with those obtained by the lag controller. In consequence, the satisfactory simulation and experiment results show that the FSFSM controller is capable of offering good large-signal operations with fast dynamical responses to the converter. At last, some other simulation results are presented to prove that the DISM controller is a promising method for the converter to eliminate the steady-state error.

Regulation of DC development and DC-mediated T-cell immunity via CISH

OpenAIRE

Miah, Mohammad Alam; Bae, Yong-Soo

2013-01-01

Cytokine inducible SH2-containing protein (CISH) plays a crucial role in type 1 dendritic cell (DC) development as well as in the DC-mediated activation of cytotoxic T lymphocytes (CTLs). CISH expression at late DC developmental stages shuts down the proliferation of DC progenitors by negatively regulating signal transducer and activator of transcription 5 (STAT5) and facilitates the differentiation of DCs into potent stimulators of CTLs.

Regulation of DC development and DC-mediated T-cell immunity via CISH.

Science.gov (United States)

Miah, Mohammad Alam; Bae, Yong-Soo

2013-03-01

Cytokine inducible SH2-containing protein (CISH) plays a crucial role in type 1 dendritic cell (DC) development as well as in the DC-mediated activation of cytotoxic T lymphocytes (CTLs). CISH expression at late DC developmental stages shuts down the proliferation of DC progenitors by negatively regulating signal transducer and activator of transcription 5 (STAT5) and facilitates the differentiation of DCs into potent stimulators of CTLs.

Acaricidal activity of Cymbopogon citratus and Azadirachta indica against house dust mites.

Science.gov (United States)

Hanifah, Azima Laili; Awang, Siti Hazar; Ming, Ho Tze; Abidin, Suhaili Zainal; Omar, Maizatul Hashima

2011-10-01

To examine the acaricidal effects of the essential oil of Cymbopogon citratus leaf extract (lemongrass) and ethanolic Azadirachta indica leaf extract (neem) against house dust mites Dermatophagoides farinae (D. farinae) and Dermatophagoides pteronyssinus (D. pteronyssinus). Twenty-five adults mites were placed onto treated filter paper that is soaked with plant extract and been tested at different concentrations (50.00%, 25.00%, 12.50%, 6.25% and 3.13%) and exposure times (24hrs, 48hrs, 72hrs and 96 hrs). All treatments were replicated 7 times, and the experiment repeated once. The topical and contact activities of the two herbs were investigated. Mortalities from lemongrass extract were higher than neem for both topical and contact activities. At 50 % concentration, both 24 hrs topical and contact exposures to lemongrass resulted in more than 91% mortalities for both species of mites. At the same concentration and exposure time, neem resulted in topical mortalities of 40.3% and 15.7% against D. pteronyssinus and D. farinae respectively; contact mortalities were 8.0% and 8.9% against the 2 mites, respectively. There was no difference in topical mortalities of D. pteronyssinus from exposure to concentrations of lemongrass and neem up to 12.50%; lemongrass was more effective than neem at the higher concentrations. Generally, topical mortalities of D. farinae due to lemongrass are higher than that due to neem. Contact mortalities of lemongrass are always higher that neem against both species of mites.

Controlling DC-DC converters by chaos-based pulse width modulation to reduce EMI

International Nuclear Information System (INIS)

Li Hong; Zhang Bo; Li Zhong; Halang, Wolfgang A.; Chen Guanrong

2009-01-01

In this paper, periodic and chaotic behaviors of DC-DC converters under certain parametric conditions are simulated, experimentally verified, and analyzed. Motivated by the work of J.H.B. Deane and D.C. Hamill in 1996, where chaotic phenomena are useful in suppressing electromagnetic interference (EMI) by adjusting the parameters of the DC-DC converter and making it operate in chaos, a chaos-based pulse width modulation (CPWM) is proposed to distribute the harmonics of the DC-DC converters continuously and evenly over a wide frequency range, thereby reducing the EMI. The output waves and spectral properties of the EMI are simulated and analyzed as the carrier frequency or amplitude changes with regard to different chaotic maps. Simulation and experimental results are given to illustrate the effectiveness of the proposed CPWM, which provides a good example of applying chaos theory in engineering practice.

Elimination of output voltage oscillations in DC-DC converter using PWM with PI controller

Directory of Open Access Journals (Sweden)

Sreenivasappa Veeranna Bhupasandra

2010-01-01

Full Text Available In this paper the SIMULINK model of a PWM controlled DC-DC converter is modeled using switching function concept to control the speed of the DC motor. The presence of the voltage oscillation cycles due to higher switching frequency in the DC-DC converter is identified. The effect of these oscillations on the output voltage of the converter, Armature current, Developed torque and Speed of the DC motor is analyzed. In order to minimize the oscillation cycles the PI controller is proposed in the PWM controller.

Analysis of high voltage step-up nonisolated DC-DC boost converters

Science.gov (United States)

Alisson Alencar Freitas, Antônio; Lessa Tofoli, Fernando; Junior, Edilson Mineiro Sá; Daher, Sergio; Antunes, Fernando Luiz Marcelo

2016-05-01

A high voltage step-up nonisolated DC-DC converter based on coupled inductors suitable to photovoltaic (PV) systems applications is proposed in this paper. Considering that numerous approaches exist to extend the voltage conversion ratio of DC-DC converters that do not use transformers, a detailed comparison is also presented among the proposed converter and other popular topologies such as the conventional boost converter and the quadratic boost converter. The qualitative analysis of the coupled-inductor-based topology is developed so that a design procedure can be obtained, from which an experimental prototype is implemented to validate the theoretical assumptions.

Common mode noise in three-level DC-DC converters

CSIR Research Space (South Africa)

Grobler, Inus

2009-09-01

Full Text Available that three-level buck DC-DC converters in general generate much lower common mode currents than conventional two-level buck converters. Further, reductions in common mode currents are achieved by using the improved three-level topologies that have been...

Analysis and Design of Bi-Directional DC-DC Converter in the Extended Run Time DC UPS System Based on Fuel Cell and Supercapacitor

DEFF Research Database (Denmark)

Zhang, Zhe; Thomsen, Ole Cornelius; Andersen, Michael A. E.

2009-01-01

Abstract-In this paper, an extended run time DC UPS system structure with fuel cell and supercapacitor is investigated. A wide input range bi-directional dc-dc converter is described along with the phase-shift modulation scheme and phase-shift with duty cycle control, in different modes. The deli......Abstract-In this paper, an extended run time DC UPS system structure with fuel cell and supercapacitor is investigated. A wide input range bi-directional dc-dc converter is described along with the phase-shift modulation scheme and phase-shift with duty cycle control, in different modes...

DC-DC power converter research for Orbiter/Station power exchange

Science.gov (United States)

Ehsani, M.

1993-01-01

This project was to produce innovative DC-DC power converter concepts which are appropriate for the power exchange between the Orbiter and the Space Station Freedom (SSF). The new converters must interface three regulated power buses on SSF, which are at different voltages, with three fuel cell power buses on the Orbiter which can be at different voltages and should be tracked independently. Power exchange is to be bi-directional between the SSF and the Orbiter. The new converters must satisfy the above operational requirements with better weight, volume, efficiency, and reliability than is available from the present conventional technology. Two families of zero current DC-DC converters were developed and successfully adapted to this application. Most of the converters developed are new and are presented.

Laboratory Study of The Effect of Lemongrass Leaves Cymbopogon citratus on An Onion Thrips Insect Thrips tabaci (Thripidae: Thysanoptera

Directory of Open Access Journals (Sweden)

Ather A. Mohsin

2018-03-01

Full Text Available This laboratory study was carried out to test the effect of the extracts of ethanol, chloroform, volatile oil and emulsifier of Cymbopogon citratus in killing the adults of the thrips tabaci. The concentrations 250, 500 and 1000 ppm. The results showed that the highest percentage of killed in Volatile oil with a concentration of 1000 ppm at 60.00, 63.33, 66.66, 70 and 76.66% for the first, second, third, fifth and seventh days of control and the lowest percentage was for the emulsifier at 30.00, 36.66, 46.66, 53.33 and 63.33% for the first and second, third, fifth and seventh days of the control, respectively, and we noticed that the higher the concentrations, the higher the percentage of killings and the increase in the percentage of killings cumulatively, as it was the highest percentage of killing on the seventh day.

Conversion of Natural Aldehydes from Eucalyptus citriodora, Cymbopogon citratus, and Lippia multiflora into Oximes: GC-MS and FT-IR Analysis †

Directory of Open Access Journals (Sweden)

Igor W. Ouédraogo

2009-08-01

Full Text Available Three carbonyl-containing extracts of essential oils from Eucalyptus citriodora (Myrtaceae, Cymbopogon citratus (Gramineae and Lippia multiflora (Verbenaceae were used for the preparation of oximes. The reaction mixtures were analyzed by GC-MS and different compounds were identified on the basis of their retention times and mass spectra. We observed quantitative conversion of aldehydes to their corresponding oximes with a purity of 95 to 99%. E and Z stereoisomers of the oximes were obtained and separated by GC-MS. During GC analysis, the high temperature in the injector was shown to cause partial dehydratation of oximes and the resulting nitriles were readily identified. Based on FT-IR spectroscopy, that revealed the high stability and low volatility of these compounds, the so-obtained oximes could be useful for future biological studies.

Sliding-mode control of single input multiple output DC-DC converter

Science.gov (United States)

Zhang, Libo; Sun, Yihan; Luo, Tiejian; Wan, Qiyang

2016-10-01

Various voltage levels are required in the vehicle mounted power system. A conventional solution is to utilize an independent multiple output DC-DC converter whose cost is high and control scheme is complicated. In this paper, we design a novel SIMO DC-DC converter with sliding mode controller. The proposed converter can boost the voltage of a low-voltage input power source to a controllable high-voltage DC bus and middle-voltage output terminals, which endow the converter with characteristics of simple structure, low cost, and convenient control. In addition, the sliding mode control (SMC) technique applied in our converter can enhance the performances of a certain SIMO DC-DC converter topology. The high-voltage DC bus can be regarded as the main power source to the high-voltage facility of the vehicle mounted power system, and the middle-voltage output terminals can supply power to the low-voltage equipment on an automobile. In the respect of control algorithm, it is the first time to propose the SMC-PID (Proportion Integration Differentiation) control algorithm, in which the SMC algorithm is utilized and the PID control is attended to the conventional SMC algorithm. The PID control increases the dynamic ability of the SMC algorithm by establishing the corresponding SMC surface and introducing the attached integral of voltage error, which endow the sliding-control system with excellent dynamic performance. At last, we established the MATLAB/SIMULINK simulation model, tested performance of the system, and built the hardware prototype based on Digital Signal Processor (DSP). Results show that the sliding mode control is able to track a required trajectory, which has robustness against the uncertainties and disturbances.

Y-Source Boost DC/DC Converter for Distributed Generation

DEFF Research Database (Denmark)

Siwakoti, Yam P.; Loh, Poh Chiang; Blaabjerg, Frede

2015-01-01

This paper introduces a versatile Y-source boost dc/dc converter intended for distributed power generation, where high gain is often demanded. The proposed converter uses a Y-source impedance network realized with a tightly coupled three-winding inductor for high voltage boosting that is presently...

SUBCONTRACT REPORT: DC-DC Converter for Fuel Cell and Hybrid Vehicles

Energy Technology Data Exchange (ETDEWEB)

Marlino, Laura D [ORNL; Zhu, Lizhi [Ballard Power Systems/Siemens VDO

2007-07-01

The goal of this project is to develop and fabricate a 5kW dc-dc converter with a baseline 14V output capability for fuel cell and hybrid vehicles. The major objectives for this dc-dc converter technology are to meet: Higher efficiency (92%); High coolant temperature,e capability (105 C); High reliability (15 Years/150,000miles); Smaller volume (5L); Lower weight (6kg); and Lower cost ($75/kW). The key technical challenge for these converters is the 105 C coolant temperatures. The power switches and magnetics must be designed to sustain these operating temperatures reliably, without a large cost/mass/volume penalty.

Multi-level cascaded DC/DC converters for PV applications

Directory of Open Access Journals (Sweden)

Ahmed A.A. Hafez

2015-12-01

Full Text Available A robust multi-level cascaded DC/DC system for Photovoltaic (PV application is advised in this article. There are three PV generators, each is coupled to a half-bridge buck cell. Each PV-generator–buck-converter channel is controlled such that maximum power is captured independently under different irradiation and temperature levels. The system operation under normal and abnormal conditions was comprehensively investigated. Internal Model Control (IMC technique was adopted for tuning the controllers. An elaborate switching modulation strategy was used to reduce the current ripple and inductor size, while maintaining high efficiency. Annotative, simple and robust remedial strategies were proposed to mitigate different anticipated faults. Comprehensive simulation results in Matlab environment were illustrated for corroborating the performance of the advised cascaded DC/DC system under normal/abnormal conditions. The proposed system enjoys the merits of independency, reduced volumetric dimensions and improved efficiency. Furthermore, the system is inherently fault-tolerant.

Development of a DC-DC conversion powering scheme for the CMS Phase-1 pixel upgrade

CERN Document Server

Feld, Lutz Werner; Karpinski, Waclaw; Klein, Katja; Lipinski, Martin; Preuten, Marius; Max Rauch; Rittich, David Michael; Sammet, Jan Domenik; Wlochal, Michael

2014-01-01

A novel powering scheme based on the DC-DC conversion technique will be exploited to power the CMS Phase-1 pixel detector. DC-DC buck converters for the CMS pixel project have been developed, based on the AMIS5 ASIC designed by CERN. The powering system of the Phase-1 pixel detector is described and the performance of the converter prototypes is detailed, including power efficiency, stability of the output voltage, shielding, and thermal management. Results from a test of the magnetic field tolerance of the DC-DC converters are reported. System tests with pixel modules using many components of the future pixel barrel system are summarized. Finally first impressions from a pre-series of 200 DC-DC converters are presented.

Auxiliary resonant DC tank converter

Science.gov (United States)

Peng, Fang Z.

2000-01-01

An auxiliary resonant dc tank (ARDCT) converter is provided for achieving soft-switching in a power converter. An ARDCT circuit is coupled directly across a dc bus to the inverter to generate a resonant dc bus voltage, including upper and lower resonant capacitors connected in series as a resonant leg, first and second dc tank capacitors connected in series as a tank leg, and an auxiliary resonant circuit comprising a series combination of a resonant inductor and a pair of auxiliary switching devices. The ARDCT circuit further includes first clamping means for holding the resonant dc bus voltage to the dc tank voltage of the tank leg, and second clamping means for clamping the resonant dc bus voltage to zero during a resonant period. The ARDCT circuit resonantly brings the dc bus voltage to zero in order to provide a zero-voltage switching opportunity for the inverter, then quickly rebounds the dc bus voltage back to the dc tank voltage after the inverter changes state. The auxiliary switching devices are turned on and off under zero-current conditions. The ARDCT circuit only absorbs ripples of the inverter dc bus current, thus having less current stress. In addition, since the ARDCT circuit is coupled in parallel with the dc power supply and the inverter for merely assisting soft-switching of the inverter without participating in real dc power transmission and power conversion, malfunction and failure of the tank circuit will not affect the functional operation of the inverter; thus a highly reliable converter system is expected.

Effect of an alkaloidal fraction of Tabernaemontana elegans (Stapf.) on selected micro-organisms.

Science.gov (United States)

Pallant, C A; Cromarty, A D; Steenkamp, V

2012-03-27

Bacterial infections remain a significant threat to human health. Due to the emergence of widespread antibiotic resistance, development of novel antibiotics is required in order to ensure that effective treatment remains available. There are several reports on the ethnomedical use of Tabernaemontana elegans pertaining to antibacterial activity. The aim of this study was to isolate and identify the fraction responsible for the antimicrobial activity in Tabernaemontana elegans (Stapf.) root extracts. The active fraction was characterized by thin layer chromatography (TLC) and gas chromatography-mass spectrometry (GC-MS). Antibacterial activity was determined using the broth micro-dilution assay and antimycobacterial activity using the BACTEC radiometric assay. Cytotoxicity of the crude extract and fractions was assessed against primary cell cultures; lymphocytes and fibroblasts; as well as a hepatocarcinoma (HepG2) and macrophage (THP-1) cell line using the Neutral Red uptake and MTT assays. The crude root extracts were found to contain a high concentration of alkaloids (1.2%, w/w). GC-MS analysis identified the indole alkaloids, voacangine and dregamine, as major components. Antibacterial activity was limited to the Gram-positive bacteria and Mycobacterium species, with MIC values in the range of 64-256μg/ml. When combined with antibiotics, additive antibacterial effects were observed. Marked cytotoxicity to all cell lines tested was evident in the MTT and Neutral Red uptake assays, with IC(50) values <9.81μg/ml. This study confirms the antibacterial activity of Tabernaemontana elegans and supports its potential for being investigated further for the development of a novel antibacterial compound. Copyright © 2012 Elsevier Ireland Ltd. All rights reserved.

Dc-To-Dc Converter Uses Reverse Conduction Of MOSFET's

Science.gov (United States)

Gruber, Robert P.; Gott, Robert W.

1991-01-01

In modified high-power, phase-controlled, full-bridge, pulse-width-modulated dc-to-dc converters, switching devices power metal oxide/semiconductor field-effect transistors (MOSFET's). Decreases dissipation of power during switching by eliminating approximately 0.7-V forward voltage drop in anti-parallel diodes. Energy-conversion efficiency increased.

Evaluation of Antioxidant and DNA Damage Protection Activity of the Hydroalcoholic Extract of Desmostachya bipinnata L. Stapf

Directory of Open Access Journals (Sweden)

Upendarrao Golla

2014-01-01

Full Text Available Desmostachya bipinnata Stapf (Poaceae/Gramineae is an official drug of ayurvedic pharmacopoeia. Various parts of this plant were used extensively in traditional and folklore medicine to cure various human ailments. The present study was aimed to evaluate the antioxidant and DNA damage protection activity of hydroalcoholic extract of Desmostachya bipinnata both in vitro and in vivo, to provide scientific basis for traditional usage of this plant. The extract showed significant antioxidant activity in a dose-dependent manner with an IC50 value of 264.18±3.47 μg/mL in H2O2 scavenging assay and prevented the oxidative damage to DNA in presence of DNA damaging agent (Fenton’s reagent at a concentration of 50 μg/mL. Also, the presence of extract protected yeast cells in a dose-dependent manner against DNA damaging agent (Hydroxyurea in spot assay. Moreover, the presence of extract exhibited significant antioxidant activity in vivo by protecting yeast cells against oxidative stressing agent (H2O2. Altogether, the results of current study revealed that Desmostachya bipinnata is a potential source of antioxidants and lends pharmacological credence to the ethnomedical use of this plant in traditional system of medicine, justifying its therapeutic application for free-radical-induced diseases.

Development of a green mode DC/DC converter available to portable nuclear instrument

International Nuclear Information System (INIS)

Gao Feiyan; Wu Longxiong; Tan Wei; Tang Yaogeng

2010-01-01

A green mode DC/DC converter was developed which suitable to the portable nuclear instrument which is powered by battery and is sometime at stand-by mode. Some updated control approaches such as pseudo-resonant type power supply control and synchronous rectification were adopted to makethe DC/DC converter operate with low power consumption and high efficiency. The test results the battery can be prolonged with this converter. (authors)

Flavan hetero-dimers in the Cymbopogon citratus infusion tannin fraction and their contribution to the antioxidant activity.

Science.gov (United States)

Costa, Gustavo; González-Manzano, Susana; González-Paramás, Ana; Figueiredo, Isabel Vitória; Santos-Buelga, Celestino; Batista, Maria Teresa

2015-03-01

Cymbopogon citratus (lemongrass) leaf infusion, a commonly used ingredient in Asian, African and Latin American cuisines, is also used in traditional medicine for the treatment of several pathological conditions; however, little is known about their bioactive compounds. Recent studies revealed the crucial role of the phenolic compounds namely flavonoids and tannins on the infusion bioactivity. Flavonoids have already been characterized; however the tannin fraction of lemongrass infusion is still uncharted. The aim of the present work is to characterize this fraction, and to evaluate its contribution to the antioxidant potential of this plant. Chemical characterization was achieved by HPLC-DAD-ESI/tandem MS and the antioxidant activity was evaluated using DPPH, ABTS and FRAP assays. Hetero-dimeric flavan structures have been described for the first time in lemongrass consisting of apigeniflavan or luteoliflavan units linked to a flavanone, either naringenin or eriodictyol, which may occur as aglycone or glycosylated forms. The antioxidant capacity of the fraction containing these compounds was significantly higher than the infusion, indicating its potential as a source of natural antioxidants.

A Dual-Buck–Boost AC/DC Converter for DC Nanogrid With Three Terminal Outputs

DEFF Research Database (Denmark)

Wu, Weimin; Wang, Houqing; Liu, Yuan

2017-01-01

Due to the widely used dc characterized loads and more distributed power generation sources, the dc nanogrid becomes more and more popular, and it is seen as an alternative to the ac grid. For safety considerations, the dc nanogrid should provide reliable grounding for the residential loads...... such as the low-voltage ac power system. There are three typical grounding configurations for a dc nanogrid: the united grounding, the unidirectional grounding, and the virtual isolated grounding. Each grounding configuration has its own specifications to ac/dc converters. In this paper, a dual-buck-boost ac/dc...... converter for use in the united-grounding-configuration-based dc nanogrid with three terminal outputs is proposed. The working principle of this converter is presented in detail through analyzing the equivalent circuits. Experiments are carried out to verify the theoretical analysis....

DESIGN OPTIMIZATION OF RESONANT DC-DC CONVERTERS

OpenAIRE

Belqasem Aljafari

2016-01-01

Resonant DC/DC converters are the class of converters, which have L-C resonant tank serving as a major part of the power conversion process. The fundamental concept of the resonant converter is that the circulating energy in an L-C resonant circuit is manageable by changing the operating frequency, and therefore the converter can condition the input power to the desired output voltage. The development in power conversion technology is steady demand for high power efficiency and high power den...

High Voltage Coil Current Sensor for DC-DC Converters Employing DDCC

Directory of Open Access Journals (Sweden)

M. Drinovsky

2015-12-01

Full Text Available Current sensor is an integral part of every switching converter. It is used for over-current protection, regulation and in case of multiphase converters for balancing. A new high voltage current sensor for coil-based current sensing in DC-DC converters is presented. The sensor employs DDCC with high voltage input stage and gain trimming. The circuit has been simulated and implemented in 0.35 um BCD technology as part of a multiphase DC-DC converter where its function has been verified. The circuit is able to sustain common mode voltage on the input up to 40 V, it occupies 0.387*0.345 mm2 and consumes 3.2 mW typically.

On the modelling of linear-assisted DC-DC voltage regulators for photovoltaic solar energy systems

Science.gov (United States)

Martínez-García, Herminio; García-Vílchez, Encarna

2017-11-01

This paper shows the modelling of linear-assisted or hybrid (linear & switching) DC/DC voltage regulators. In this kind of regulators, an auxiliary linear regulator is used, which objective is to cancel the ripple at the output voltage and provide fast responses for load variations. On the other hand, a switching DC/DC converter, connected in parallel with the linear regulator, allows to supply almost the whole output current demanded by the load. The objective of this topology is to take advantage of the suitable regulation characteristics that series linear voltage regulators have, but almost achieving the high efficiency that switching DC/DC converters provide. Linear-assisted DC/DC regulators are feedback systems with potential instability. Therefore, their modelling is mandatory in order to obtain design guidelines and assure stability of the implemented power supply system.

A Feedback Passivation Design for DC Microgrid and Its DC/DC Converters

Directory of Open Access Journals (Sweden)

Feifan Ji

2016-12-01

Full Text Available There are difficulties in analyzing the stability of microgrids since they are located on various network structures. However, considering that the network often consists of passive elements, the passivity theory is applied in this paper to solve the above-mentioned problem. It has been formerly shown that when the network is weakly strictly positive real (WSPR, the DC microgrid is stable if all interfaces between the microgrid and converters are made to be passive, which is called interface passivity. Then, the feedback passivation method is proposed for the controller design of various DC–DC converters to achieve the interface passivity. The interface passivity is different from the passivity of closed-loop systems on which the passivity based control (PBC concentrates. The feedback passivation design is detailed for typical buck converters and boost converters in terms of conditions that the controller parameters should satisfy. The theoretical results are verified by a hardware-in-loop real-time labotray (RTLab simulation of a DC microgrid with four generators.

Test Results of Selected Commercial DC/DC Converters under Cryogenic Temperatures - A Digest

Science.gov (United States)

Patterson, Richard; Hammoud, Ahmad

2010-01-01

DC/DC converters are widely used in space power systems in the areas of power management and distribution, signal conditioning, and motor control. Design of DC/DC converters to survive cryogenic temperatures will improve the power system performance, simplify design, and reduce development and launch costs. In this work, the performance of nine COTS modular, low-tomedium power DC/DC converters was investigated under cryogenic temperatures. The converters were evaluated in terms of their output regulation, efficiency, and input and output currents. At a given temperature, these properties were obtained at various input voltages and at different load levels. A summary on the performance of the tested converters was given. More comprehensive testing and in-depth analysis of performance under long-term exposure to extreme temperatures are deemed necessary to establish the suitability of these and other devices for use in the harsh environment of space exploration missions.

A Bidirectional Resonant DC-DC Converter Suitable for Wide Voltage Gain Range

DEFF Research Database (Denmark)

Shen, Yanfeng; Wang, Huai; Al-Durra, Ahmed

2018-01-01

This paper proposes a new bidirectional resonant dc-dc converter suitable for wide voltage gain range applications (e.g., energy storage systems). The proposed converter overcomes the narrow voltage gain range of conventional resonant dc-dc converters, and meanwhile achieves high efficiency...... losses. The operation principles and characteristics of the proposed converter are firstly analyzed in this paper. Then the analytical solutions for the voltage gain, soft-switching, and rms currents are derived, which facilitates the parameters design and optimization. Finally, the proposed topology...... and analysis are verified with experimental results obtained from a 1-kW converter prototype....

simulation effect of gamma radiation on growth and essential oil production of lemongrass cymbopogon citratus L

International Nuclear Information System (INIS)

Abo-Elseoud, M.A.; Deaf, M.N.; Afifi, R.A; Abo-Etia, A.M.

2004-01-01

field experiment was conducted to study the effect of different doses of gamma radiation on growth and volatile oil production of lemongrass, C ymbopogon citratus L. i n this consideration, lemongrass segments were exposed to irradiation doses of 0.5,10,20 and 40 gray and cultivated in the experimental field of atomic energy authority, Inshas. three consequent harvest were taken at flowering stage as the fresh weights were recorded . volatile oil contents, volatile oil constituents and sugars content were determined in the plants herb. results showed that irradiation doses up to 20 gray induced a stimulation effect on plant growth as it increased the fresh weight of plant herb. data of total oil content (cc/plant ) showed noticeable enhancement up to irradiation dose of 20 gray, however, a slight decline was recorded with the higher irradiation dose of 40 gray. GLC of lemongrass volatile oil revealed that 19 components are resulted as citral aa nd citral bw ere the most predominant components . the impact of the studied irradiation treatments on the constituents of lemongrass oil was discussed. in addition, sugars content were determined and some increases were resulted in response to the studied gamma irradiation treatments

Y-source impedance-network-based isolated boost DC/DC converter

DEFF Research Database (Denmark)

Siwakoti, Yam P.; Town, Graham; Loh, Poh Chiang

2014-01-01

A dc-dc converter with very high voltage gain is proposed in this paper for any medium-power application requiring a high voltage boost with galvanic isolation. The proposed converter topology can be realized using only two switches. With this topology a very high voltage boost can be achieved even...... with a relatively low duty cycle of the switches, and the gain obtainable is presently not matched by any existing impedance network based converter operated at the same duty ratio. The proposed converter has a Y-source impedance network to boost the voltage at the intermediate dc-link side and a push......-pull transformer for square-wave AC inversion and isolation. The voltage-doubler rectifier provides a constant dc voltage at the output stage. A theoretical analysis of the converter is presented, supported by simulation and experimental results. A 250 W down-scaled prototype was implemented in the laboratory...

Multilevel DC link inverter

Science.gov (United States)

Su, Gui-Jia

2003-06-10

A multilevel DC link inverter and method for improving torque response and current regulation in permanent magnet motors and switched reluctance motors having a low inductance includes a plurality of voltage controlled cells connected in series for applying a resulting dc voltage comprised of one or more incremental dc voltages. The cells are provided with switches for increasing the resulting applied dc voltage as speed and back EMF increase, while limiting the voltage that is applied to the commutation switches to perform PWM or dc voltage stepping functions, so as to limit current ripple in the stator windings below an acceptable level, typically 5%. Several embodiments are disclosed including inverters using IGBT's, inverters using thyristors. All of the inverters are operable in both motoring and regenerating modes.

Stability analysis of a high-step-Up DC grid-connected two-stage boost DC-DC converter

Directory of Open Access Journals (Sweden)

El Aroudi A.

2014-01-01

Full Text Available High conversion ratio switching converters are used whenever there is a need to step-up dc source voltage level to a much higher output dc voltage level such as in photovoltaic systems, telecommunications and in some medical applications. A simple solution for achieving this high conversion ratio is by cascading different stages of dc-dc boost converters. The individual converters in such a cascaded system are usually designed separately applying classical design criteria. However these criteria may not be applicable for the complete cascaded system . This paper first presents a glimpse on the bifurcation behavior that a cascade connection of two boost converters can exhibit. It is shown that the desired periodic orbit can undergo period doubling leading to subharmonic oscillations and chaotic regimes. Then, in order to simplify the analysis the second stage is considered as constant current sink and design-oriented analysis is carried out to obtain stability boundaries in the parameter space by taking into account slope interactions between the state variables in the two-different stages.

Studi Komparasi Fungsi Keanggotaan Fuzzy sebagai Kontroler Bidirectional DC-DC Converter pada Sistem Penyimpan Energi

Directory of Open Access Journals (Sweden)

Eka Prasetyono

2015-09-01

Full Text Available Bidirectional DC-DC converter is needed in the energy storage system. The converter topology used in this paper was a non-isolated bidirectional DC-DC buck-boost converter. This converter worked in two ways, which the charging mode stored energy into battery when load current was less than nominal main DC current (set point and discharging mode transferred energy from battery to the load when its current exceeded set point value. Both of these modes worked automatically according to the load current. The charging and discharging currents were controlled by fuzzy logic controller which was implemented on microcontroller ARM Cortex-M4F STM32F407VG. This paper compares two types of fuzzy membership function (triangular and sigmoid in controlling bidirectional DC-DC converter. The results showed that fuzzy logic controller with triangle membership function and sigmoid as control bidirectional DC-DC converter had no significant different response, both had an average error for charging and discharging process under 4% with ripple current on the main DC bus around 0.5%. The computing time of program for fuzzy logic controller with triangular membership functions had 19.01% faster than sigmoid, and fuzzy logic computation time on a microcontroller with hardware floating point was 60% faster than software floating point.

La biotecnología en el tratamiento de úlcera vascular: estudio de caso

Directory of Open Access Journals (Sweden)

Alana Tamar Oliveira de Sousa

2013-07-01

Full Text Available El objetivo de este estudio de caso fue describir la asistencia prestada a una paciente portadora de úlcera venosa mediante la utlización de asociaciones de solución de limpieza a base de cloruro de sodio y del aceite esencial de las hojas de Cymbopogon citratus Stapf, gel a base de Aloe vera, colágeno y una cobertura de película de hemicelulosa. Se realizó acompañamiento a la paciente durante las curaciones, la evolución de la lesión y la aplicación del tratamiento establecido, a partir de las escalas de valoración se pudieron obtener los datos necesarios para conocer los resultados de la terapéutica utilizada. La asociación de los productos y el seguimiento de las orientaciones sobre los cuidados de la enfermedad de la paciente, evidenciaron resultados positivos en cuanto a la cicatrización, la reducción del dolor y olor. El uso de productos adecuados a las condiciones de la úlcera y las escalas utilizadas para evaluaciones sistemáticas de la herida, mostraron avances en los procesos de cicatrización.

Digitally intensive DC-DC converter for extreme space environments, Phase II

Data.gov (United States)

National Aeronautics and Space Administration — The Space Micro-Arizona State University (ASU) team will develop an all-digitally controlled, wide temperature range point-of-load switch-mode DC-DC regulator core...

Zero-voltage DC/DC converter with asymmetric pulse-width modulation for DC micro-grid system

Science.gov (United States)

Lin, Bor-Ren

2018-04-01

This paper presents a zero-voltage switching DC/DC converter for DC micro-grid system applications. The proposed circuit includes three half-bridge circuit cells connected in primary-series and secondary-parallel in order to lessen the voltage rating of power switches and current rating of rectifier diodes. Thus, low voltage stress of power MOSFETs can be adopted for high-voltage input applications with high switching frequency operation. In order to achieve low switching losses and high circuit efficiency, asymmetric pulse-width modulation is used to turn on power switches at zero voltage. Flying capacitors are used between each circuit cell to automatically balance input split voltages. Therefore, the voltage stress of each power switch is limited at Vin/3. Finally, a prototype is constructed and experiments are provided to demonstrate the circuit performance.

Protective Effect of Cymbopogon citratus Essential Oil in Experimental Model of Acetaminophen-Induced Liver Injury.

Science.gov (United States)

Uchida, Nancy Sayuri; Silva-Filho, Saulo Euclides; Aguiar, Rafael Pazinatto; Wiirzler, Luiz Alexandre Marques; Cardia, Gabriel Fernando Esteves; Cavalcante, Heitor Augusto Otaviano; Silva-Comar, Francielli Maria de Souza; Becker, Tânia Cristina Alexandrino; Silva, Expedito Leite; Bersani-Amado, Ciomar Aparecida; Cuman, Roberto Kenji Nakamura

2017-01-01

To investigate the hepatoprotective effect of Cymbopogon citratus or lemongrass essential oil (LGO), it was used in an animal model of acute liver injury induced by acetaminophen (APAP). Swiss mice were pretreated with LGO (125, 250 and 500[Formula: see text]mg/kg) and SLM (standard drug, 200[Formula: see text]mg/kg) for a duration of seven days, followed by the induction of hepatotoxicity of APAP (single dose, 250[Formula: see text]mg/kg). The liver function markers alanine aminotransferase (ALT), aspartate aminotransferase (AST), alkaline phosphatase (ALP) and gamma-glutamyl transferase were determined to evaluate the hepatoprotective effects of the LGO. The livers were used to determine myeloperoxidase (MPO) activity, nitric oxide (NO) production and histological analysis. The effect of LGO on leukocyte migration was evaluated in vitro. Anti-oxidant activity was performed by assessing the free radical 2,2-diphenyl-1-picrylhydrazyl (DPPH) in vitro. LGO pretreatment decreased significantly the levels of ALT, AST and ALP compared with APAP group. MPO activity and NO production were decreased. The histopathological analysis showed an improved of hepatic lesions in mice after LGO pretreatment. LGO inhibited neutrophil migration and exhibited anti-oxidant activity. Our results suggest that LGO has protective activity against liver toxicity induced by paracetamol.

A Fixed-Frequency Bidirectional Resonant DC-DC Converter Suitable for Wide Voltage Gain Range

DEFF Research Database (Denmark)

Shen, Yanfeng; Wang, Huai; Blaabjerg, Frede

2017-01-01

This paper proposes a new bidirectional resonant dc-dc converter suitable for wide voltage gain range applications (e.g., energy storage systems). The proposed converter overcomes the narrow voltage gain range of conventional resonant DC-DC converters, and meanwhile achieves high efficiency...... and characteristics of the proposed converter are analyzed. Finally, a 1-kW converter prototype is built and the experimental results verify the theoretical analyses....

Pulse-width modulated DC-DC power converters

CERN Document Server

Kazimierczuk, Marian K

2008-01-01

This book studies switch-mode power supplies (SMPS) in great detail. This type of converter changes an unregulated DC voltage into a high-frequency pulse-width modulated (PWM) voltage controlled by varying the duty cycle, then changes the PWM AC voltage to a regulated DC voltage at a high efficiency by rectification and filtering. Used to supply electronic circuits, this converter saves energy and space in the overall system. With concept-orientated explanations, this book offers state-of-the-art SMPS technology and promotes an understanding of the principle operations of PWM converters,

Digitally intensive DC-DC converter for extreme space environments, Phase I

Data.gov (United States)

National Aeronautics and Space Administration — The Space Micro –Arizona State University (ASU) team will develop an all-digitally controlled, wide temperature range point-of-load switch-mode DC-DC regulator core...

DC Voltage Droop Control Implementation in the AC/DC Power Flow Algorithm: Combinational Approach

DEFF Research Database (Denmark)

Akhter, F.; Macpherson, D.E.; Harrison, G.P.

2015-01-01

of operational flexibility, as more than one VSC station controls the DC link voltage of the MTDC system. This model enables the study of the effects of DC droop control on the power flows of the combined AC/DC system for steady state studies after VSC station outages or transient conditions without needing...... to use its complete dynamic model. Further, the proposed approach can be extended to include multiple AC and DC grids for combined AC/DC power flow analysis. The algorithm is implemented by modifying the MATPOWER based MATACDC program and the results shows that the algorithm works efficiently....

High-Voltage DC-DC Converter Topology for PV Energy Utilization - Investigation and Implementation

DEFF Research Database (Denmark)

Sanjeevikumar, Padmanaban; Blaabjerg, Frede; Wheeler, Patrick

2017-01-01

This paper exploited the utilization of photovoltaic (PV) energy system with high-voltage (HV) output DC-DC converter. Classical boost converters are used for both renewable energy integration and HV applications, but limited by reducing output/efficiency in performance. Moreover, as parasitic...... elements suppress the power transfer ratio, converter needs to maximize the PV energy utilization. This investigation study focused to include additional parasitic elements (voltage-lift technique) to a standard DC-DC buck converter and to overcome all the above drawbacks to maximize the PV power...

Computer Simulation of Phase Shifted Series Resonant DC to DC Converter

Directory of Open Access Journals (Sweden)

P. PARVATHY

2016-01-01

Full Text Available This paper deals with digital simulation of phase shifted series resonant DC to DC converter using Matlab Simulink. The Simulink models for open loop and closed loop systems are developed and they are used for simulation studies. This converter is capable of producing ripple free DC output. Switching losses and switching stresses are reduced by using soft switching. This converter has advantages like high power density and low switching losses. Theoretical predictions are well supported by the simulation results.

Power flow analysis for DC voltage droop controlled DC microgrids

DEFF Research Database (Denmark)

Li, Chendan; Chaudhary, Sanjay; Dragicevic, Tomislav

2014-01-01

This paper proposes a new algorithm for power flow analysis in droop controlled DC microgrids. By considering the droop control in the power flow analysis for the DC microgrid, when compared with traditional methods, more accurate analysis results can be obtained. The algorithm verification is ca...

Light weight, high power, high voltage dc/dc converter technologies

Science.gov (United States)

Kraus, Robert; Myers, Ira; Baumann, Eric

1990-01-01

Power-conditioning weight reductions by orders of magnitude will be required to enable the megawatt-power-level space systems envisioned by the Strategic Defense Initiative, the Air Force, and NASA. An interagency program has been initiated to develop an 0.1-kg/kW dc/dc converter technology base for these future space applications. Three contractors are in the first phase of a competitive program to develop a megawatt dc/dc converter. Researchers at NASA Lewis Research Center are investigating innovative converter topology control. Three different converter subsystems based on square wave, resonant, and super-resonant topologies are being designed. The components required for the converter designs cover a wide array of technologies. Two different switches, one semiconductor and the other gas, are under development. Issues related to thermal management and material reliability for inductors, transformers, and capacitors are being investigated in order to maximize power density. A brief description of each of the concepts proposed to meet the goals of this program is presented.

Digital peak current mode control with adaptive slope compensation for DC-DC converters

DEFF Research Database (Denmark)

Andersen, Karsten Holm; Nymand, Morten

2017-01-01

performance and stability of current mode control. The presented method adapt to DC-DC converter operating conditions by estimating the rising and falling inductor current slopes, to apply a current slope compensation value to obtain a constant quality factor. The experimental results verifies the theoretical......This paper presents an adaptive slope compensation method for peak current mode control of digital controlled DC-DC converters, which controls the quality factor of the complex conjugated poles at half the switching frequency. Using quality factor control enables optimization of the dynamic...

DC-Link Compensation Method for Slim DC Link Drives Fed by Soft Grid

DEFF Research Database (Denmark)

Mathe, Laszlo; Rosendahl Andersen, Henrik; Lazar, Radu

2010-01-01

Slim DC-link PWM (AC) drives for lowperformance applications are emerging on the market. Such drives equipped with a small DC-link capacitance exhibit instability tendencies, if installed on a soft line, giving a degraded performance. The total harmonic distortion (THD) and the partially weighted...... harmonic distortion (PWHD) of the line current are degraded, if resonance between the line impedance and the DC-link capacitance occurs. Likewise, the motor performance is affected negatively giving extra torque ripple, vibration and acoustic-noise emission. This paper proposes a novel DC-link compensation...

High-power three-port three-phase bidirectional DC-DC converter

NARCIS (Netherlands)

Tao, H.; Duarte, J.L.; Hendrix, M.A.M.

2007-01-01

This paper proposes a three-port three-phase bidirectional dc-dc converter suitable for high-power applications. The converter combines a slow primary source and a fast storage to power a common load (e.g., an inverter). Since this type of system is gaining popularity in sustainable energy

Precharge strategies for isolated modular DC-DC converters under two different start-up conditions

DEFF Research Database (Denmark)

Zhang, Yi; Wang, Huai; Li, Binbin

2017-01-01

The isolated modular DC-DC converter (IMDCC) is a new topology designed to connect high-voltage direct current (HVDC) lines with different voltage levels, which ties two DC grids by using two modular multilevel converters (MMCs) via a medium-frequency transformer. Due to the large value of capaci......The isolated modular DC-DC converter (IMDCC) is a new topology designed to connect high-voltage direct current (HVDC) lines with different voltage levels, which ties two DC grids by using two modular multilevel converters (MMCs) via a medium-frequency transformer. Due to the large value...... of capacitance in the IMDCC, proper precharge strategies before the start-up are significant for the safety and reliability of the whole system. This paper presents two closed-loop precharge control strategies to fully charge the sub-module (SM) capacitors of the IMDCC, considering two different start...

Modeling and analysis of fractional order DC-DC converter.

Science.gov (United States)

Radwan, Ahmed G; Emira, Ahmed A; AbdelAty, Amr M; Azar, Ahmad Taher

2017-07-11

Due to the non-idealities of commercial inductors, the demand for a better model that accurately describe their dynamic response is elevated. So, the fractional order models of Buck, Boost and Buck-Boost DC-DC converters are presented in this paper. The detailed analysis is made for the two most common modes of converter operation: Continuous Conduction Mode (CCM) and Discontinuous Conduction Mode (DCM). Closed form time domain expressions are derived for inductor currents, voltage gain, average current, conduction time and power efficiency where the effect of the fractional order inductor is found to be strongly present. For example, the peak inductor current at steady state increases with decreasing the inductor order. Advanced Design Systems (ADS) circuit simulations are used to verify the derived formulas, where the fractional order inductor is simulated using Valsa Constant Phase Element (CPE) approximation and Generalized Impedance Converter (GIC). Different simulation results are introduced with good matching to the theoretical formulas for the three DC-DC converter topologies under different fractional orders. A comprehensive comparison with the recently published literature is presented to show the advantages and disadvantages of each approach. Copyright © 2017 ISA. Published by Elsevier Ltd. All rights reserved.

Magnetically coupled high-gain Y-source isolated DC/DC converter

DEFF Research Database (Denmark)

Siwakoti, Yam P.; Loh, Poh Chiang; Blaabjerg, Frede

2014-01-01

A new form of magnetically coupled DC/DC converter is proposed for medium power applications (250 W to 2 kW), requiring a high-voltage gain, short inductive charging time and galvanic isolation. The proposed converter can be realised using a unique Y-source impedance network and a two-switch push...

Obtenção e uso das plantas medicinais no distrito de Martim Francisco, Município de Mogi-Mirim, SP, Brasil Acquisition and use of medicinal plants in Martim Francisco district, Mogi Mirim Municipality, São Paulo State, Brazil

Directory of Open Access Journals (Sweden)

Milena Andrea Curitiba Pilla

2006-12-01

Full Text Available O objetivo do presente trabalho foi realizar um inventário das plantas medicinais conhecidas e usadas pela população do distrito de Martim Francisco, Município de Mogi-Mirim, SP, bem como conhecer seus empregos e sua importância na comunidade. Foram amostradas aleatoriamente 50 unidades domiciliares. Apenas um dos adultos responsáveis pela casa (homem ou mulher foi entrevistado, através de questionários. As plantas citadas foram coletadas e fotografadas paralelamente à aplicação dos questionários. O material botânico foi identificado e depositado no Herbarium Rioclarense (HRCB. Ao todo, foram catalogadas 107 espécies botânicas, predominantemente herbáceas e cultivadas, distribuídas em 40 famílias, sendo as famílias Lamiaceae e Asteraceae as mais representativas. Os índices de diversidade (H' = 4,07; e = 0,87 foram altos, se comparados aos obtidos em outros trabalhos no interior do Estado de São Paulo. Na preparação dos remédios, as folhas foram a parte da planta mais utilizada e a decocção a principal forma de preparo. A via oral foi a mais empregada para a administração dos medicamentos e as doenças mais freqüentemente tratadas por remédios caseiros referem-se aos Sistemas Digestivo e Respiratório. Não existe um rigor na posologia e na duração do tratamento, ficando este a critério do hábito de cada pessoa entrevistada. As plantas que apresentaram índice de importância relativa e concordância de uso acima de 60% foram: boldo (Plectranthus barbatus Andrews, capim-santo (Cymbopogon citratus (DC Stapf, hortelã (Mentha sp. 2 e poejo (Cunila microcephala Benth..The aim of this work was to do an ethnobotanical survey of medicinal plants known and used by people in the Martim Francisco district, Mogi Mirim Municipality, São Paulo State, Brazil, as well as to investigate their application and importance for the community. A questionnaire was applied to a random sample of 50 households; in each, one adult (male

A high voltage ratio and low ripple interleaved DC-DC converter for fuel cell applications.

Science.gov (United States)

Chang, Long-Yi; Chao, Kuei-Hsiang; Chang, Tsang-Chih

2012-01-01

This paper proposes a high voltage ratio and low ripple interleaved boost DC-DC converter, which can be used to reduce the output voltage ripple. This converter transfers the low DC voltage of fuel cell to high DC voltage in DC link. The structure of the converter is parallel with two voltage-doubler boost converters by interleaving their output voltages to reduce the voltage ripple ratio. Besides, it can lower the current stress for the switches and inductors in the system. First, the PSIM software was used to establish a proton exchange membrane fuel cell and a converter circuit model. The simulated and measured results of the fuel cell output characteristic curve are made to verify the correctness of the established simulation model. In addition, some experimental results are made to validate the effectiveness in improving output voltage ripple of the proposed high voltage ratio interleaved boost DC-DC converters.

DC Rocks! Using Place-Based Learning to Introduce Washington DC's K-12 Students to the Geosciences

Science.gov (United States)

Mayberry, G. C.; Mattietti, G. K.

2017-12-01

The Washington DC area has interesting geology and a multitude of agencies that deal with the geosciences, yet K-12 public school students in DC, most of whom are minorities, have limited exposure to the geosciences. Geoscience agencies in the DC area have a unique opportunity to address this by introducing the geosciences to local students who otherwise may not have such an opportunity, by highlighting the geology in the students' "backyard," and by leveraging partnerships among DC-based geoscience-related agencies. The USGS and George Mason University are developing a project called DC Rocks, which will give DC's students an exciting introduction into the world of geoscience with place-based learning opportunities that will make geoscience relevant to their lives and their futures. Both the need in DC and the potential for lasting impact are great; the geosciences have the lowest racial diversity of all the science, technology, engineering, and math (STEM) fields, 89% of students in DC public schools are minorities, and there is no dedicated geoscience curriculum in DC. DC Rocks aims to give these students early exposure to the earth sciences, and encourage them to consider careers in the profession. DC Rocks will work with partner agencies to apply several methods that are recommended by researchers to increase the participation of minority students in the geosciences, including providing profoundly positive experiences that spark interest in the geosciences (Levine et al., 2007); increasing students' sense of belonging in the geosciences (Huntoon, et al, 2016); and place-based teaching practices that emphasize the study of local sites (Semken, 2005), such as DC's Rock Creek Park. DC Rocks will apply these methods by coordinating local geoscientists and resources to provide real-world examples of the geosciences' impact on students' lives. Through the DC Rocks website, educators will be able to request geoscience-related resources such as class presentations by

Radiated electromagnetic emissions of DC-DC converters

International Nuclear Information System (INIS)

Feld, L; Jussen, R; Karpinski, W; Klein, K; Sammet, J; Wlochal, M

2010-01-01

For the CMS tracker at SLHC a new powering scheme is considered to be mandatory to allow the detector to provide at least the same performance as today at the LHC. The baseline solution of CMS foresees the use of DC-DC converters to provide larger currents with smaller losses. An important component of most converters are inductors which, however, tend to radiate the switching noise generated by the converter. The emissions of different inductors have been measured and simulated, the coil design has been optimized and noise susceptibility measurements, with present CMS hardware, have been performed. This article summarizes the results.

Modeling, Analysis and Control of Different DC-DC Converter Topologies for Photo Voltaic Emulator

Directory of Open Access Journals (Sweden)

Mohammad Tauquir Iqbal

2016-05-01

Full Text Available This paper presents the modeling, analysis and control of different DC-DC converter topologies to emulate the photovoltaic (PV system. A PV emulator is basically a DC-DC converter having same electrical characteristics that of solar PV panel.  The emulator helps to achieve real characteristics of PV system in a better way in an environment where using actual PV systems can produce inconsistent results due to variation in weather conditions. The paper describes different types of DC-DC converters like buck, Resonant and Quasi Resonant Converter. The complete system is modelled in MATLAB® Simulink SimPowerSystem software package. The Simulation results obtained from the MATLAB® Simulink SimPowerSystem software package for different topologies under steady and dynamic conditions are analyzed and presented. An evaluation table is also presented at the end of the paper, presenting the effectiveness of each topology.

Homopolar dc motor and trapped flux brushless dc motor using high temperature superconductor materials

Science.gov (United States)

Crapo, Alan D.; Lloyd, Jerry D.

1991-03-01

Two motors have been designed and built for use with high-temperature superconductor (HTSC) materials. They are a homopolar dc motor that uses HTSC field windings and a brushless dc motor that uses bulk HTSC materials to trap flux in steel rotor poles. The HTSC field windings of the homopolar dc motor are designed to operate at 1000 A/sq cm in a 0.010-T field. In order to maximize torque in the homopolar dc motor, an iron magnetic circuit with small air gaps gives maximum flux for minimum Ampere turns in the field. A copper field winding version of the homopolar dc motor has been tested while waiting for 575 A turn HTSC coils. The trapped flux brushless dc motor has been built and is ready to test melt textured bulk HTSC rings that are currently being prepared. The stator of the trapped flux motor will impress a magnetic field in the steel rotor poles with warm HTSC bulk rings. The rings are then cooled to 77 K to trap the flux in the rotor. The motor can then operate as a brushless dc motor.

Differential Mode EMI Filter Design for Isolated DC-DC Boost Converter

DEFF Research Database (Denmark)

Makda, Ishtiyaq Ahmed; Nymand, Morten

2014-01-01

A Differential Mode EMI filter for a low input voltage high-current isolated dc-dc boost converter is designed and presented in this paper. The primary side Differential Mode noise voltage is low due to the high transformer turn ratio, however, the input current is very high and since the EMI limit...... also does not change for such converters, it requires greatly optimized design approach for the filter including the correct sizing of the filter components. A complete analytical filter design process is carried out such a way that the Differential Mode noise voltage source in the converter...... is identified first. The DM noise model is then established and based on the harmonic analysis of the noise source voltage waveform, the complete Differential Mode EMI filter, including the filter resonance damping branch, is designed for a 3kW isolated dc-dc boost converter. The noise model and its theoretical...

Current Mode Control for LLC Series Resonant DC-to-DC Converters

Directory of Open Access Journals (Sweden)

Jinhaeng Jang

2015-06-01

Full Text Available Conventional voltage mode control only offers limited performance for LLC series resonant DC-to-DC converters experiencing wide variations in operational conditions. When the existing voltage mode control is employed, the closed-loop performance of the converter is directly affected by unavoidable changes in power stage dynamics. Thus, a specific control design optimized at one particular operating point could become unacceptable when the operational condition is varied. This paper presents a new current mode control scheme which could consistently provide good closed-loop performance for LLC resonant converters for the entire operational range. The proposed control scheme employs an additional feedback from the current of the resonant tank network to overcome the limitation of the existing voltage mode control. The superiority of the proposed current mode control over the conventional voltage mode control is verified using an experimental 150 W LLC series resonant DC-to-DC converter.

Application handbook for a Standardized Control Module (SCM) for DC-DC converters, volume 1

Science.gov (United States)

Lee, F. C.; Mahmoud, M. F.; Yu, Y.

1980-04-01

The standardized control module (SCM) was developed for application in the buck, boost and buck/boost DC-DC converters. The SCM used multiple feedback loops to provide improved input line and output load regulation, stable feedback control system, good dynamic transient response and adaptive compensation of the control loop for changes in open loop gain and output filter time constraints. The necessary modeling and analysis tools to aid the design engineer in the application of the SCM to DC-DC Converters were developed. The SCM functional block diagram and the different analysis techniques were examined. The average time domain analysis technique was chosen as the basic analytical tool. The power stage transfer functions were developed for the buck, boost and buck/boost converters. The analog signal and digital signal processor transfer functions were developed for the three DC-DC Converter types using the constant on time, constant off time and constant frequency control laws.

Application handbook for a Standardized Control Module (SCM) for DC-DC converters, volume 1

Science.gov (United States)

Lee, F. C.; Mahmoud, M. F.; Yu, Y.

1980-01-01

The standardized control module (SCM) was developed for application in the buck, boost and buck/boost DC-DC converters. The SCM used multiple feedback loops to provide improved input line and output load regulation, stable feedback control system, good dynamic transient response and adaptive compensation of the control loop for changes in open loop gain and output filter time constraints. The necessary modeling and analysis tools to aid the design engineer in the application of the SCM to DC-DC Converters were developed. The SCM functional block diagram and the different analysis techniques were examined. The average time domain analysis technique was chosen as the basic analytical tool. The power stage transfer functions were developed for the buck, boost and buck/boost converters. The analog signal and digital signal processor transfer functions were developed for the three DC-DC Converter types using the constant on time, constant off time and constant frequency control laws.

Design of PI Controlled Non Isolated Bidirectional DC to DC Converter for Electric Vehicle Application

Science.gov (United States)

Geetha, A.; Subramani, C.; Thamizh Thentral, T. M.; Krithika, V.; Usha, S.

2018-04-01

Non isolated Bidirectional DC-DC Converter (NIBDDC) is a good interface between DC source and inverter Fed induction motor drive. This paper deals with comparison between open loop and PI controlled Bidirectional DC to DC Converter Inverter System (BDDCIS). The modelling and control of BDDC is becomes an important issue. Open loop BDDCIS and closed loop PI controlled BDDCIS are designed, modelled and simulated using Matlab- simulink and their results are presented. The investigations indicate superior performance of PI controlled BDDCIS. The proposed BDDCIS has advantages like bidirectional power transfer ability, reduced hardware count and improved dynamic response.

Application of Distributed DC/DC Electronics in Photovoltaic Systems

Science.gov (United States)

Kabala, Michael

In a typical residential, commercial or utility grade photovoltaic (PV) system, PV modules are connected in series and in parallel to form an array that is connected to a standard DC/AC inverter, which is then connected directly to the grid. This type of standard installation; however, does very little to maximize the energy output of the solar array if certain conditions exist. These conditions could include age, temperature, irradiance and other factors that can cause mismatch between PV modules in an array that severely cripple the output power of the system. Since PV modules are typically connected in series to form a string, the output of the entire string is limited by the efficiency of the weakest module. With PV module efficiencies already relatively low, it is critical to extract the maximum power out of each module in order to make solar energy an economically viable competitor to oil and gas. Module level DC/DC electronics with maximum power point (MPP) tracking solves this issue by decoupling each module from the string in order for the module to operate independently of the geometry and complexity of the surrounding system. This allows each PV module to work at its maximum power point by transferring the maximum power the module is able to deliver directly to the load by either boosting (stepping up) the voltage or bucking (stepping down) the voltage. The goal of this thesis is to discuss the development of a per-module DC/DC converter in order to maximize the energy output of a PV module and reduce the overall cost of the system by increasing the energy harvest.

Quasiperiodicity and Torus Breakdown in a Power Electronic DC/DC Converter

DEFF Research Database (Denmark)

Zhusubaliyev, Zhanybai; Soukhoterin, Evgeniy; Mosekilde, Erik

2007-01-01

This paper discusses the mechanisms of torus formation and torus destruction in a dc/dc converter with relay control and hysteresis. We establish a chart of the dynamical modes in the input voltage versus load resistance parameter plane. This chart displays several different torus bifurcations...

DC Distribution Systems and Microgrids

DEFF Research Database (Denmark)

Dragicevic, Tomislav; Anvari-Moghaddam, Amjad; Quintero, Juan Carlos Vasquez

2017-01-01

summarized. Due to its attractive characteristics in terms of compliance with modern generation, storage and electronic load technologies, high reliability and current carrying capacity, as well as simple control, DC systems are already an indispensable part of power systems. Moreover, the existing......A qualitative overview of different hardware topologies and control systems for DC MGs has been presented in this chapter. Some challenges and design considerations of DC protections systems have also been discussed. Finally, applications of DC MGs in emerging smart grid applications have been...... challenges such as protection issues will be effectively resolved in the near future due to fast progress of semiconductor technology which is a key enabler cheap and reliable future DC solid-state protection systems. Therefore, it is the view of the author that more and more DC systems will appear...

Comparison study of moisture content, colour properties and essential oil compounds extracted by hydrodistillation and supercritical fluid extraction between stem and leaves of lemongrass (Cymbopogun citratus)

Science.gov (United States)

Kamaruddin, Shazlin; Mustapha, Wan Aida Wan; Haiyee, Zaibunnisa Abdul

2018-04-01

The objectives of this study were to compare the properties of moisture content, colour and essential oil compounds between stem and leaves of lemongrass (Cymbopogun citratus). The essential oil was extracted using two different methods which are hydrodistillation and supercritical fluid extraction (SFE). There was no significant difference of moisture content between stem and leaves of lemongrass. The lightness (L) and yellowness (+b) values of the stems were significantly higher (pleaves. The highest yield of essential oil was obtained by extraction using supercritical fluid extraction (SFE) in leaves (˜ 0.7%) by treatment at 1700psi and 50°C. The main compound of extracted essential oil was citral (geranial and neral).

Analysis of the Coupling Behavior of PEM Fuel Cells and DC-DC Converters

Directory of Open Access Journals (Sweden)

Achim Kienle

2009-03-01

Full Text Available The connection between PEM fuel cells and common DC-DC converters is examined. The analysis is model-based and done for boost, buck and buck-boost converters. In a first step, the effect of the converter ripples upon the PEM fuel cell is shown. They introduce oscillations in the fuel cell. Their appearance is explained, discussed and possibilities for their suppression are given. After that, the overall behaviors of the coupled fuel cell-converter systems are analyzed. It is shown, that neither stationary multiplicities nor oscillations can be introduced by the couplings and therefore separate control approaches for both the PEMFC and the DC-DC converters are applicable.

Single Event Burnout in DC-DC Converters for the LHC Experiments

Energy Technology Data Exchange (ETDEWEB)

Claudio H. Rivetta et al.

2001-09-24

High voltage transistors in DC-DC converters are prone to catastrophic Single Event Burnout in the LHC radiation environment. This paper presents a systematic methodology to analyze single event effects sensitivity in converters and proposes solutions based on de-rating input voltage and output current or voltage.

Area-Efficiency Trade-Offs in Integrated Switched-Capacitor DC-DC Converters

DEFF Research Database (Denmark)

Spliid, Frederik Monrad; Larsen, Dennis Øland; Knott, Arnold

2016-01-01

This paper analyzes the relationship between efficiency and chip area in a fully integrated switched capacitor voltage divider dc-dc converter implemented in 180nm-technology and a 1/2 topology. A numerical algorithm for choosing the optimal sizes of individual components, in terms of power loss...

Egr2 induced during DC development acts as an intrinsic negative regulator of DC immunogenicity.

Science.gov (United States)

Miah, Mohammad Alam; Byeon, Se Eun; Ahmed, Md Selim; Yoon, Cheol-Hee; Ha, Sang-Jun; Bae, Yong-Soo

2013-09-01

Early growth response gene 2 (Egr2), which encodes a zinc finger transcription factor, is rapidly and transiently induced in various cell types independently of de novo protein synthesis. Although a role for Egr2 is well established in T-cell development, Egr2 expression and its biological function in dendritic cells (DCs) have not yet been described. Here, we demonstrate Egr2 expression during DC development, and its role in DC-mediated immune responses. Egr2 is expressed in the later stage of DC development from BM precursor cells. Even at steady state, Egr2 is highly expressed in mouse splenic DCs. Egr2-knockdown (Egr2-KD) DCs showed increased levels of major histocompatability complex (MHC) class I and II and co-stimulatory molecules, and enhanced antigen uptake and migratory capacities. Furthermore, Egr2-KD abolished SOCS1 expression and signal transducer and activator of transcription 5 (STAT5) activation during DC development, probably resulting in the enhancement of IL-12 expression and Th1 immunogenicity of a DC vaccine. DC-mediated cytotoxic T lymphocyte (CTL) activation and antitumor immunity were significantly enhanced by Egr2-KD, and impaired by Egr2 overexpression in antigen-pulsed DC vaccines. These data suggest that Egr2 acts as an intrinsic negative regulator of DC immunogenicity and can be an attractive molecular target for DC vaccine development. © 2013 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Impact of DC link control strategies on the power-flow convergence of integrated AC–DC systems

Directory of Open Access Journals (Sweden)

Shagufta Khan

2016-03-01

Full Text Available For the power-flow solution of integrated AC–DC systems, five quantities are required to be solved per converter, against three independent equations available. These three equations consist of two basic converter equations and one DC network equation, corresponding to each converter. Thus, for solution, two additional equations are required. These two equations are derived from the control specifications adopted for the DC link. Depending on the application, several combinations of valid control specifications are possible. A set of valid control specifications constitutes a control strategy. It is observed that the control strategy adopted for the DC link strongly affects the power-flow convergence of integrated AC–DC systems. This paper investigates how different control strategies affect the power flow convergence of integrated AC–DC systems. Sequential method is used to solve the DC variables in the Newton Raphson (NR power flow model. Seven typical control strategies have been taken into consideration. This is validated by numerous case studies carried out with multiple DC links incorporated in the IEEE 118-bus and 300-bus test systems.

Investigation of DC-DC Boost Converter for Reliability of Operational Planning

DEFF Research Database (Denmark)

Khazraj, Hesam; Ashouri, Mani; Silva, Filipe Miguel Faria da

2018-01-01

of the interests related to reliability is the power semiconductor switches, which are the most vulnerable elements. The failure of one-power switches can reduce the system reliability. Interleaved technique for DC-DC converters is a redundant strategy to improve the reliability, but at the cost of increasing...

Comparison of solar panel cooling system by using dc brushless fan and dc water

International Nuclear Information System (INIS)

Irwan, Y M; Leow, W Z; Irwanto, M; M, Fareq; Hassan, S I S; Amelia, A R; Safwati, I

2015-01-01

The purpose of this article is to discuss comparison of solar panel cooling system by using DC brushless fan and DC water pump. Solar photovoltaic (PV) power generation is an interesting technique to reduce non-renewable energy consumption and as a renewable energy. The temperature of PV modules increases when it absorbs solar radiation, causing a decrease in efficiency. A solar cooling system is design, construct and experimentally researched within this work. To make an effort to cool the PV module, Direct Current (DC) brushless fan and DC water pump with inlet/outlet manifold are designed for constant air movement and water flow circulation at the back side and front side of PV module representatively. Temperature sensors were installed on the PV module to detect temperature of PV. PIC microcontroller was used to control the DC brushless fan and water pump for switch ON or OFF depend on the temperature of PV module automatically. The performance with and without cooling system are shown in this experiment. The PV module with DC water pump cooling system increase 3.52%, 36.27%, 38.98%in term of output voltage, output current, output power respectively. It decrease 6.36 °C compare than to PV module without DC water pump cooling system. While DC brushless fan cooling system increase 3.47%, 29.55%, 32.23%in term of output voltage, output current, and output power respectively. It decrease 6.1 °C compare than to PV module without DC brushless fan cooling system. The efficiency of PV module with cooling system was increasing compared to PV module without cooling system; this is because the ambient temperature dropped significantly. The higher efficiency of PV cell, the payback period of the system can be shorted and the lifespan of PV module can also be longer. (paper)

75 FR 47199 - Airworthiness Directives; McDonnell Douglas Corporation Model DC-9-10 Series Airplanes, DC-9-30...

Science.gov (United States)

2010-08-05

... Airworthiness Directives; McDonnell Douglas Corporation Model DC- 9-10 Series Airplanes, DC-9-30 Series... existing airworthiness directive (AD), which applies to all McDonnell Douglas Model DC-9-10 series..., 2010). That AD applies to all McDonnell Douglas Corporation Model DC-9-10 series airplanes, DC-9-30...

A Novel Single Switch Transformerless Quadratic DC/DC Buck-Boost Converter

DEFF Research Database (Denmark)

Mostaan, Ali; A. Gorji, Saman; N. Soltani, Mohsen

2017-01-01

A novel quadratic buck-boost DC/DC converter is presented in this study. The proposed converter utilizes only one active switch and can step-up/down the input voltage, while the existing single switch quadratic buck/boost converters can only work in step-up or step-down mode. First, the proposed ...

Drilling history core hole DC-8

International Nuclear Information System (INIS)

1978-10-01

Core hole DC-8 was completed in August, 1978 by Boyles Brothers Drilling Company, Spokane, Washington, under subcontract to Fenix and Scission, Inc. The hole was cored for the US Department of Energy and the Rockwell Hanford Operations' Basalt Waste Isolation Program. Fenix and Scisson, Inc. furnished the engineering, daily supervision of the core drilling activities, and geologic core logging for hole DC-8. Core hole DC-8 is located on the Hanford Site near the Wye Barricade and 50 feet northwest of rotary hole DC-7. The Hanford Site vation coordinates for DC-8 are North 14,955.94 feet and West 14,861.92 coordinates for DC-8 are North 14,955.94 feet and West 14,861.92 mean sea level. The purpose of core hole DC-8 was to core drill vertically through the basalt and interbed units for stratigraphic depth determination and core collection, and to provide a borehole for hydrologic testing and cross-hole seismic shear and pressure wave velocity studies with rotary hole DC-7. The total depth of core hole DC-8 was 4100.5 feet. Core recovery exceeded 97 percent of the total footage cored

Drilling history core hole DC-8

Energy Technology Data Exchange (ETDEWEB)

1978-10-01

Core hole DC-8 was completed in August, 1978 by Boyles Brothers Drilling Company, Spokane, Washington, under subcontract to Fenix and Scission, Inc. The hole was cored for the US Department of Energy and the Rockwell Hanford Operations' Basalt Waste Isolation Program. Fenix and Scisson, Inc. furnished the engineering, daily supervision of the core drilling activities, and geologic core logging for hole DC-8. Core hole DC-8 is located on the Hanford Site near the Wye Barricade and 50 feet northwest of rotary hole DC-7. The Hanford Site vation coordinates for DC-8 are North 14,955.94 feet and West 14,861.92 coordinates for DC-8 are North 14,955.94 feet and West 14,861.92 mean sea level. The purpose of core hole DC-8 was to core drill vertically through the basalt and interbed units for stratigraphic depth determination and core collection, and to provide a borehole for hydrologic testing and cross-hole seismic shear and pressure wave velocity studies with rotary hole DC-7. The total depth of core hole DC-8 was 4100.5 feet. Core recovery exceeded 97 percent of the total footage cored.

Characterization of diode valve in medium voltage dc/dc converter for wind turbines

DEFF Research Database (Denmark)

Dincan, Catalin Gabriel; Kjær, Philip Carne

2016-01-01

This paper proposes a methodology for characterization of medium voltage (MV), medium frequency (MF) rectifier diode valve. The intended application is for 10MW dc/dc converters used in DC offshore wind turbines. Sensitivity to semiconductor component parameter variation, snubber component tolera...... tolerance, influence of temperature and stray capacitance are analyzed. It is concluded that the largest impact on sensitivity is given by reverse recovery charge variation and differences of temperature between adjacent devices....

Operation and control of a DC-grid offshore wind farm under DC transmission system faults

DEFF Research Database (Denmark)

Deng, Fujin; Chen, Zhe

2013-01-01

. Consequently, the protection and control strategies of dc systems need to be established. This paper studies a dc-grid offshore wind farm, where the wind power collection system and power transmission system adopt dc technology. In this paper, the redundancy of the HVDC transmission system under faults...... is studied, and a fault ridethrough strategy for the dc-grid offshore wind farm is proposed. The proposed strategy can effectively minimize the impacts of the power transmission system disturbance on the offshore wind farm, and on the ac grid. A dc-grid offshore wind farm example is simulated with PSCAD....../EMTDC, and the results validate the feasibility of the presented redundancy configuration and operation approach, and the fault ridethrough control strategy....

Open- and Short-Circuit Fault Identification for a Boost dc/dc Converter in PV MPPT Systems

Directory of Open Access Journals (Sweden)

Diego R. Espinoza Trejo

2018-03-01

Full Text Available This paper proposes a fault identification system for short and open-circuit switch faults (SOCSF for a dc/dc converter acting as a Maximum Power Point Tracker (MPPT in Photovoltaic (PV systems. A closed-loop operation is assumed for the boost dc/dc converter. A linearizing control plus a Proportional-Derivative (PD controller is suggested for PV voltage regulation at the maximum power point (MPP. In this study, the SOCSF are modeled by using an additive fault representation and the fault identification (FI system is synthesized departing from a Luenberger observer. Hence, an FI signal is obtained, which is insensitive to irradiance and load current changes, but affected by the SOCSF. For FI purposes, only the sensors used in the control system are needed. Finally, an experimental evaluation is presented by using a solar array simulator dc power supply and a boost dc/dc converter of 175 W in order to validate the ideas this study exposes.

Research on Two-channel Interleaved Two-stage Paralleled Buck DC-DC Converter for Plasma Cutting Power Supply

DEFF Research Database (Denmark)

Yang, Xi-jun; Qu, Hao; Yao, Chen

2014-01-01

As for high power plasma power supply, due to high efficiency and flexibility, multi-channel interleaved multi-stage paralleled Buck DC-DC Converter becomes the first choice. In the paper, two-channel interleaved two- stage paralleled Buck DC-DC Converter powered by three-phase AC power supply...

The Application Of Liquid Fertilizer Made Of Traditional Market Organic Wastes On Growth Of Setaria Grass (Setaria splendida Stapf

Directory of Open Access Journals (Sweden)

Hendarto Eko

2018-01-01

Full Text Available There are hugh amount of traditional market organic wastes that may polute the environment. In general, the wastes are utilized for compost making and liquid fertilizer as well for plant. The use of liquid fertilizer from organic wastes of traditional markets opens up opportunities for misplaced cultivation of Setaria grass (Setaria splendida Stapf, which is required by ruminant farms. This research was conducted to evaluate the best mixture of water to the fertilizer in term of its effectiveness on the variables and experimental method using Completely Randomized Design. The treatments were: 6 doses of mixtures namely 0, 10, 20, 30, 40 and 50 liters of water, each of which was mixed with 10 liters of liquid fertilizer. The variables measured were the height, the numbers of tillers, the numbers of leaves, and canopy. The results of the study showed that the doses of water in the fertilizer did not indicate any significant differences (P > 0.05 on all variables being studied, however, the linear equation showed that greater concentrations of water in the fertilizer tended to decrease the growth of Setaria grass. Suggested use of water on the liquid fertilizer mixture should be not greater than 30 l – 10 l fertilizer.

The Application Of Liquid Fertilizer Made Of Traditional Market Organic Wastes On Growth Of Setaria Grass (Setaria splendida Stapf)

Science.gov (United States)

Hendarto, Eko; Suwarno

2018-02-01

There are hugh amount of traditional market organic wastes that may polute the environment. In general, the wastes are utilized for compost making and liquid fertilizer as well for plant. The use of liquid fertilizer from organic wastes of traditional markets opens up opportunities for misplaced cultivation of Setaria grass (Setaria splendida Stapf), which is required by ruminant farms. This research was conducted to evaluate the best mixture of water to the fertilizer in term of its effectiveness on the variables and experimental method using Completely Randomized Design. The treatments were: 6 doses of mixtures namely 0, 10, 20, 30, 40 and 50 liters of water, each of which was mixed with 10 liters of liquid fertilizer. The variables measured were the height, the numbers of tillers, the numbers of leaves, and canopy. The results of the study showed that the doses of water in the fertilizer did not indicate any significant differences (P > 0.05) on all variables being studied, however, the linear equation showed that greater concentrations of water in the fertilizer tended to decrease the growth of Setaria grass. Suggested use of water on the liquid fertilizer mixture should be not greater than 30 l - 10 l fertilizer.

Pulsed-DC selfsputtering of copper

International Nuclear Information System (INIS)

Wiatrowski, A; Posadowski, W M; Radzimski, Z J

2008-01-01

At standard magnetron sputtering conditions (argon pressure ∼0.5 Pa) inert gas particles are often entrapped in the formed films. Inert gas contamination can be eliminated by using the self-sustained magnetron sputtering process because it is done in the absence of the inert gas atmosphere. The self-sustained sputtering (SSS) gives also a unique condition during the transport of sputtered particles to the substrate. It is especially useful for filling high aspect ratio submicron scale structures for microelectronics. So far it has been shown that the self-sputtering process can be sustained in the DC operation mode (DC-SSS) only. The main disadvantage of DC-SSS process is instability related to possible arc formation. Usage of pulsed sputtering, similarly to reactive pulsed magnetron sputtering, could eliminate this problem. In this paper results of pulsed-DC self-sustained magnetron sputtering (pulsed DC-SSS) of copper are presented for the first time. The planar magnetron equipped with a 50 mm in diameter and 6 mm thick copper target was powered by DC-power supply modulated by power switch. The maximum target power was about 11 kW (∼550W/cm 2 ). The magnetron operation was investigated as a function of pulsing frequency (20-100 kHz) and duty factor (50-90%). The discharge extinction pressure was determined for these conditions. The plasma emission spectra (400-410nm range) and deposition rates were observed for both DC and pulsed DC sustained self-sputtering processes. The presented results illustrate that stable pulsed DC-SSS process can be obtained at pulsing frequency in the range of 60-100 kHz and duty factor of 70-90%

Pulsed-DC selfsputtering of copper

Science.gov (United States)

Wiatrowski, A.; Posadowski, W. M.; Radzimski, Z. J.

2008-03-01

At standard magnetron sputtering conditions (argon pressure ~0.5 Pa) inert gas particles are often entrapped in the formed films. Inert gas contamination can be eliminated by using the self-sustained magnetron sputtering process because it is done in the absence of the inert gas atmosphere. The self-sustained sputtering (SSS) gives also a unique condition during the transport of sputtered particles to the substrate. It is especially useful for filling high aspect ratio submicron scale structures for microelectronics. So far it has been shown that the self-sputtering process can be sustained in the DC operation mode (DC-SSS) only. The main disadvantage of DC-SSS process is instability related to possible arc formation. Usage of pulsed sputtering, similarly to reactive pulsed magnetron sputtering, could eliminate this problem. In this paper results of pulsed-DC self-sustained magnetron sputtering (pulsed DC-SSS) of copper are presented for the first time. The planar magnetron equipped with a 50 mm in diameter and 6 mm thick copper target was powered by DC-power supply modulated by power switch. The maximum target power was about 11 kW (~550W/cm2). The magnetron operation was investigated as a function of pulsing frequency (20-100 kHz) and duty factor (50-90%). The discharge extinction pressure was determined for these conditions. The plasma emission spectra (400-410nm range) and deposition rates were observed for both DC and pulsed DC sustained self-sputtering processes. The presented results illustrate that stable pulsed DC-SSS process can be obtained at pulsing frequency in the range of 60-100 kHz and duty factor of 70-90%.

DC injection into low voltage AC networks

Energy Technology Data Exchange (ETDEWEB)

NONE

2005-07-01

This report summarises the results of a study investigating the impact of levels of injected DC current injections on a low voltage AC distribution network systems in order to recommend acceptable limits of DC from microgeneration. Relevant literature is reviewed, and the impact of DC levels in distribution transformers, transformer modelling, and instrumental transformers are discussed. The impact of DC in residual current devices (RCD) and in domestic electricity watt hour meters is examined along with DC enhanced corrosion, corrosion failure, and the measurement of DC current injection. Sources of DC injection outlined include DC from computer power supplies, network faults, geomagnetic phenomena, lighting circuits/dimmers, and embedded generators.

Transition towards DC micro grids: From an AC to a hybrid AC and DC energy infrastructure

Directory of Open Access Journals (Sweden)

Evi Ploumpidou

2017-12-01

Full Text Available Our electricity is predominantly powered by alternating current (AC, ever since the War of Currents ended in the favor of Nicola Tesla at the end of the 19th century. However, lots of the appliances we use, such as electronics and lights with light-emitting diode (LED technology, work internally on direct current (DC and it is projected that the number of these appliances will increase in the near future. Another contributor to the increase in DC consumption is the ongoing electrification of mobility (Electric Vehicles (EVs. At the same time, photovoltaics (PV generate DC voltages, while the most common storage technologies also use DC. In order to integrate all these appliances and technologies to the existing AC grid, there is a need for converters which introduce power losses. By distributing DC power to DC devices instead of converting it to AC first, it is possible to avoid substantial energy losses that occur every time electricity is converted. This situation initiated the concept for the implementation of the DC-Flexhouse project. A prototype DC installation will be developed and tested in one of the buildings of the developing living lab area called the District of Tomorrow (De Wijk van Morgen which is located in Heerlen, the Netherlands. A neighborhood cooperative (Vrieheide cooperatie is also part of the consortium in order to address the aspect of social acceptance. Although DC seems to be a promising solution for a more sustainable energy system, the business case is still debatable due to both technology- and market-related challenges. The current energy infrastructure is predominantly based on AC, manufacturers produce devices based on AC standards and people are using many AC products across a long life span. This Smart Energy Buildings & Cities (SEB&C PDEng project is a contribution to the DC-Flexhouse project. The aim is to analyze the challenges in the transition to DC micro grids, assess the market potential of DC

DC-Compensated Current Transformer.

Science.gov (United States)

Ripka, Pavel; Draxler, Karel; Styblíková, Renata

2016-01-20

Instrument current transformers (CTs) measure AC currents. The DC component in the measured current can saturate the transformer and cause gross error. We use fluxgate detection and digital feedback compensation of the DC flux to suppress the overall error to 0.15%. This concept can be used not only for high-end CTs with a nanocrystalline core, but it also works for low-cost CTs with FeSi cores. The method described here allows simultaneous measurements of the DC current component.

High voltage dc cables

Energy Technology Data Exchange (ETDEWEB)

Bjustrom, B

1965-12-01

How stress distribution in dc cables varies with temperature and stress level, influence of polarity reversals and space charges, and different types of overvoltage to which dc cable may be subjected are discussed. Design problems, especially as related to corrosion protection and to mechanical stress caused by wire armoring during manufacturing and laying, accessories and work done on test methods, and the possibility of designing 400 to 600 kV dc cables for transmitting 2000 to 4000 MW are described.

Comparative evaluation of bidirectional dual active bridge DC-DC converter variants

NARCIS (Netherlands)

Sfakianakis, G.; Everts, J.; Huisman, H.; Lomonova, E.A.

2016-01-01

For the realization of DC-DC converters in automotive industry, the Dual Active Bridge (DAB) converter seems to be a promising choice because of its soft-switching and high-power-density capability. Contrary to the traditional 3 level - 3 level (3-3L) DAB, a 3 level - 5 level (3-5L) DAB can operate

Improvement of burst-mode control of piezoelectric transformer based DC/DC converter

International Nuclear Information System (INIS)

Vasic, Dejan; Liu, Yuan-Ping; Costa, François; Schwander, Denis; Wu, Wen-Jong

2013-01-01

Burst-mode operation is adopted sometimes in piezoelectric transformer based converters for two major purposes: (1) to achieve voltage regulation in DC/DC converters and (2) to achieve dimming control in backlight inverters. Burst-mode control enables the converter to operate at a constant switching frequency as well as to maintain good efficiency at light load conditions. However, in practice, the piezoelectric transformer cannot instantly stop vibrating in the burst-mode due to its high quality factor. The delay in the output voltage change resulting from this behavior influences the accuracy of the regulation. This paper proposes a control strategy to make the piezoelectric transformer stop more quickly so as to enhance the accuracy of burst-mode control. The proposed method only modifies the control signal of the burst-mode driving circuit. The proposed control strategy is verified by experiments in a step-down 9 W DC/DC converter. (paper)

Modular Power System Configured with Standard Product Hybrid DC-DC Converters, Phase II

Data.gov (United States)

National Aeronautics and Space Administration — VPT proposes an innovative concept whereby complex NASA space power electronic systems can be configured using a small number of qualified hybrid DC-DC converter and...

DIAGNOSTIC/PROGNOSTIC EXPERIMENTS FOR CAPACITOR DEGRADATION AND HEALTH MONITORING IN DC-DC CONVERTERS

Data.gov (United States)

National Aeronautics and Space Administration — Studying and analyzing the ageing mechanisms of electronic components avionics in systems such as the GPS and INAV are of critical importance. In DC-DC power...

Simulating and Testing a DC-DC Half-Bridge SLR Converter

Science.gov (United States)

2013-06-01

future pulse power demands with ship power, a large bank of capacitors or similar rapid discharge source is required. If capacitors are charged...Single Pulsed Avalanche Energy (j) I" Avalanche Current (i) E,, Repetilive Avalanche Energy (i) dv/dt Peak Diode Recovery dv/dt ® Po Total Power...SLR), battery charging, DC-DC, pulse power, power electronics, SLR converter 15. NUMBER OF PAGES 119 16. PRICE CODE 17. SECURITY CLASSIFICATION

Efficient Visible Light Communication Transmitters Based on Switching-Mode dc-dc Converters

Science.gov (United States)

2018-01-01

Visible light communication (VLC) based on solid-state lighting (SSL) is a promising option either to supplement or to substitute existing radio frequency (RF) wireless communication in indoor environments. VLC systems take advantage of the fast modulation of the visible light that light emitting diodes (LEDs) enable. The switching-mode dc-to-dc converter (SMCdc-dc) must be the cornerstone of the LED driver of VLC transmitters in order to incorporate the communication functionality into LED lighting, keeping high power efficiency. However, the new requirements related to the communication, especially the high bandwidth that the LED driver must achieve, converts the design of the SMCdc-dc into a very challenging task. In this work, three different methods for achieving such a high bandwidth with an SMCdc-dc are presented: increasing the order of the SMCdc-dc output filter, increasing the number of voltage inputs, and increasing the number of phases. These three strategies are combinable and the optimum design depends on the particular VLC application, which determines the requirements of the VLC transmitter. As an example, an experimental VLC transmitter based on a two-phase buck converter with a fourth-order output filter will demonstrate that a bandwidth of several hundred kilohertz (kHz) can be achieved with output power levels close to 10 W and power efficiencies between 85% and 90%. In conclusion, the design strategy presented allows us to incorporate VLC into SSL, achieving high bit rates without damaging the power efficiency of LED lighting. PMID:29642455

DC-Voltage Fluctuation Elimination Through a DC-Capacitor Current Control for DFIG Converters Under Unbalanced Grid Voltage Conditions

DEFF Research Database (Denmark)

Liu, Changjin; Xu, Dehong; Zhu, Nan

2013-01-01

Unbalanced grid voltage causes a large second-order harmonic current in the dc-link capacitors as well as dc-voltage fluctuation, which potentially will degrade the lifespan and reliability of the capacitors in voltage source converters. This paper proposes a novel dc-capacitor current control...... method for a grid-side converter (GSC) to eliminate the negative impact of unbalanced grid voltage on the dc-capacitors. In this method, a dc-capacitor current control loop, where a negative-sequence resonant controller is used to increase the loop gain, is added to the conventional GSC current control...... loop. The rejection capability to the unbalanced grid voltage and the stability of the proposed control system are discussed. The second-order harmonic current in the dc capacitor as well as dc-voltage fluctuation is very well eliminated. Hence, the dc capacitors will be more reliable under unbalanced...

Induction of bulb organogenesis in in vitro cultures of tarda tulip (Tulipa tarda Stapf.) from seed-derived explants.

Science.gov (United States)

Maślanka, Małgorzata; Bach, Anna

2014-01-01

A protocol for obtaining bulbs via in vitro organogenesis was developed for tarda tulip ( Tulipa tarda Stapf). Scale explants were obtained from bulbs formed at the base of seedlings or from adventitious bulbs that developed from callus tissue forming on stolons or on germinating seeds. Some explants were subjected to chilling at 5°C for 12 wk. The culture media contained 3 or 6% sucrose and was supplemented with either no growth regulators, either 0.5 μM 6-benzyl-aminopurine (BAP) or 18.9 or 94.6 μM abscisic acid (ABA). Cultures were maintained in the dark at 20°C. Callus tissue developed mainly on media without growth regulators or with BAP. Callus was formed from up to 96% of explants derived from non-chilled adventitious bulbs that were treated with 3% sucrose and 0.5 μM BAP. Less callus was formed from chilled explants compared with non-chilled explants. Newly formed adventitious bulbs appeared on the explants via direct and indirect organogenesis. The media with BAP promoted the formation of adventitious bulbs at a rate of 56-92% from non-chilled explants, whereas a maximum rate of 36% was observed from chilled explants. ABA inhibited the induction of adventitious bulbs and callus. The adventitious bulbs obtained in these experiments contained a meristem, which was evidence that they had developed properly.

AC Voltage Control of DC/DC Converters Based on Modular Multilevel Converters in Multi-Terminal High-Voltage Direct Current Transmission Systems

Directory of Open Access Journals (Sweden)

Rui Li

2016-12-01

Full Text Available The AC voltage control of a DC/DC converter based on the modular multilevel converter (MMC is considered under normal operation and during a local DC fault. By actively setting the AC voltage according to the two DC voltages of the DC/DC converter, the modulation index can be near unity, and the DC voltage is effectively utilized to output higher AC voltage. This significantly decreases submodule (SM capacitance and conduction losses of the DC/DC converter, yielding reduced capital cost, volume, and higher efficiency. Additionally, the AC voltage is limited in the controllable range of both the MMCs in the DC/DC converter; thus, over-modulation and uncontrolled currents are actively avoided. The AC voltage control of the DC/DC converter during local DC faults, i.e., standby operation, is also proposed, where only the MMC connected on the faulty cable is blocked, while the other MMC remains operational with zero AC voltage output. Thus, the capacitor voltages can be regulated at the rated value and the decrease of the SM capacitor voltages after the blocking of the DC/DC converter is avoided. Moreover, the fault can still be isolated as quickly as the conventional approach, where both MMCs are blocked and the DC/DC converter is not exposed to the risk of overcurrent. The proposed AC voltage control strategy is assessed in a three-terminal high-voltage direct current (HVDC system incorporating a DC/DC converter, and the simulation results confirm its feasibility.

First Implementation of a Two-Stage DC-DC Conversion Powering Scheme for the CMS Phase-2 Outer Tracker

CERN Document Server

Feld, Lutz Werner; Karpinski, Waclaw; Klein, Katja; Lipinski, Martin; Pauls, Alexander Josef; Preuten, Marius; Rauch, Max Philip; Wangelik, Frederik; Wlochal, Michael

2017-01-01

The 2S silicon strip modules for the CMS Phase-2 tracker upgrade will require two operating voltages. These will be provided via a two-step DC-DC conversion powering scheme, in which one DC-DC converter delivers 2.5\\,V while the second DC-DC converter receives 2.5\\,V at its input and converts it to 1.2\\,V. The DC-DC converters will be mounted on a flex PCB, the service hybrid, together with an opto-electrical converter module (VTRx+) and a serializer (LP-GBT). The service hybrid will be mounted directly on the 2S module. A prototype service hybrid has been developed and its performance has been evaluated, including radiative and conductive noise emissions, and efficiency. In addition system tests with a prototype module have been performed. In this report the service hybrid will be described and the test results will be summarized.

A suitable model plant for control of the set fuel cell-DC/DC converter

Energy Technology Data Exchange (ETDEWEB)

Andujar, J.M.; Segura, F.; Vasallo, M.J. [Departamento de Ingenieria Electronica, Sistemas Informaticos y Automatica, E.P.S. La Rabida, Universidad de Huelva, Ctra. Huelva - Palos de la Frontera, S/N, 21819 La Rabida - Palos de la Frontera Huelva (Spain)

2008-04-15

In this work a state and transfer function model of the set made up of a proton exchange membrane (PEM) fuel cell and a DC/DC converter is developed. The set is modelled as a plant controlled by the converter duty cycle. In addition to allow setting the plant operating point at any point of its characteristic curve (two interesting points are maximum efficiency and maximum power points), this approach also allows the connection of the fuel cell to other energy generation and storage devices, given that, as they all usually share a single DC bus, a thorough control of the interconnected devices is required. First, the state and transfer function models of the fuel cell and the converter are obtained. Then, both models are related in order to achieve the fuel cell+DC/DC converter set (plant) model. The results of the theoretical developments are validated by simulation on a real fuel cell model. (author)

Research of digital controlled DC/DC converter based on STC12C5410AD

Science.gov (United States)

Chen, Dan-Jiang; Jin, Xin; Xiao, Zhi-Hong

2010-02-01

In order to study application of digital control technology on DC/DC converter, principle of increment mode PID control algorithm was analyzed in the paper. Then, a SCM named STC12C5410AD was introduced with its internal resources and characteristics. The PID control algorithm can be implemented easily based on it. The output of PID control was used to change the value of a variable that is 255 times than duty cycle, and this reduced the error of calculation. The valid of the presented algorithm was verified by an experiment for a BUCK DC/DC converter. The experimental results indicated that output voltage of the BUCK converter is stable with low ripple.

On-grid and Off-grid Operation of Multi-Input Single-Output DC/DC Converter based Fuel Cell Generation System

Directory of Open Access Journals (Sweden)

Noroozian

2009-06-01

Full Text Available This paper presents the modeling and simulation of a proton exchange membrane fuel cell (PEMFC generation system for off-grid and on-grid operation and configuration. A fuel cell DG system consists of a fuel cell power plant, a DC/DC converter and a DC/AC inverter. The dynamic model for fuel cell array and its power electronic interfacing are presented also a multi-input single output (MISO DC/DC converter and its control scheme is proposed and analyzed. This DC/DC converter is capable of interfacing fuel cell arrays to the DC/AC inverter. Also the mathematical model of the inverter is obtained by using average technique. Then the novel control strategy of DC/AC inverter for different operating conditions is demonstrated. The simulation results show the effectiveness of the suggested control systems under both on-grid and off-grid operation modes.

RF-superimposed DC and pulsed DC sputtering for deposition of transparent conductive oxides

International Nuclear Information System (INIS)

Stowell, Michael; Mueller, Joachim; Ruske, Manfred; Lutz, Mark; Linz, Thomas

2007-01-01

Transparent conductive oxide films are widely used materials for electronic applications such as flat panel displays and solar cells. The superposition of DC and pulsed DC power by a certain fraction of RF power was applied to deposit indium tin oxide films. This technique allows an additional tuning of different parameters relevant to film growth, and yields high quality films even under kinetically limited conditions. A long-term stable RF/DC process could be realized by using different combinations of standard power supply components, which includes a fully reliable arc handling system for both the RF and DC generators. The effectiveness of the arc handling system is illustrated by the current and voltage behavior recorded for actual arcing events. The resistivity of indium tin oxide films is strongly influenced by the respective sputtering mode. The best resistivity values of 145-148 μΩ cm were obtained by RF-superimposed pulsed DC sputtering at a pulse frequency between 100 and 200 kHz and a substrate temperature as low as 140 deg. C. In addition, the films were extremely smooth with a surface roughness of 1-2.5 nm

The application of standardized control and interface circuits to three dc to dc power converters.

Science.gov (United States)

Yu, Y.; Biess, J. J.; Schoenfeld, A. D.; Lalli, V. R.

1973-01-01

Standardized control and interface circuits were applied to the three most commonly used dc to dc converters: the buck-boost converter, the series-switching buck regulator, and the pulse-modulated parallel inverter. The two-loop ASDTIC regulation control concept was implemented by using a common analog control signal processor and a novel digital control signal processor. This resulted in control circuit standardization and superior static and dynamic performance of the three dc-to-dc converters. Power components stress control, through active peak current limiting and recovery of switching losses, was applied to enhance reliability and converter efficiency.

Design of the DC-DC power stage of the capacitor charger for MAXIDISCAP power converters

CERN Document Server

Cravero, Jean-Marc

2013-01-01

This technical report presents the design of the DC-DC power stage of the capacitor charger for MAXIDISCAP power converters. The power stage is based on a half bridge series resonant converter in Discontinuous Conduction Mode (DCM). This simple and robust topology allows obtaining a current source behavior with a low switching losses power stage. The associated control stage is implemented using a commercial controller which has differenti nternal circuits that allows a high integration of the converter control system. The report presents the design and tuning criteria for the DC-DC converter, including the power stage and the control system.

Analysis of DC/DC Converter Efficiency for Energy Storage System Based on Bidirectional Fuel Cells

DEFF Research Database (Denmark)

Pittini, Riccardo; Zhang, Zhe; Andersen, Michael A. E.

2013-01-01

interface to the grid. In power electronics, the converter efficiency is characterized at fixed operating voltage for various output power. This type of characterization is not suitable for fuel cells, since as the power from the fuel cell increases, the cell voltage decreases. This paper analyses how......Renewable energy sources are fluctuating depending on the availability of the energy source. For this reason, energy storage is becoming more important and bidirectional fuel cells represent an attractive technology. Fuel cells require highcurrent low-voltage dc-dc or dc-ac converters as power...... the fuel cell I-V characteristics influences the power electronics converter efficiency and their consequence on the overall system. A loaddependent efficiency curve is presented based on experimental results from a 6 kW dc-dc converter prototype including the most suitable control strategy which maximizes...

Design and Implementation of Digital Current Mode Controller for DC-DC Converters

DEFF Research Database (Denmark)

Taeed, Fazel

to be regulated by a closed-loop controller. The Peak Current Mode Control (PCMC) is one of the most promising control methods for dc-dc converters. It has been known for high bandwidth (speed), and inherent current protection. Increasing the controller bandwidth decreases the output filter size and cost. Analog...

Soft switching bidirectional DC-DC converter for ultracapacitor-batteries interface

International Nuclear Information System (INIS)

Adib, Ehsan; Farzanehfard, Hosein

2009-01-01

In this paper a new soft switching bidirectional DC-DC converter is introduced which can be applied as the interface circuit between ultracapacitors and batteries or fuel cells. All semiconductor devices in the proposed converter are soft switched while the control circuit remains PWM. Due to achieved soft switching condition, the energy conversion through the proposed converter is highly efficient. The proposed converter is analyzed and a prototype converter is implemented. The presented experimental results confirm the theoretical analysis.

Design and modelling of high gain DC-DC converters for fuel cell hybrid electric vehicles

Science.gov (United States)

Elangovan, D.; Karthigeyan, V.; Subhanu, B.; Ashwin, M.; Arunkumar, G.

2017-11-01

Transportation (Diesel and petrol internal combustion engine vehicles) approximately contributes to 25.5% of total CO2 emission. Thus diesel and petrol engine vehicles are the most dominant contributors of CO2 emission which leads global warming which causes climate change. The problem of CO2 emission and global warming can be reduced by focusing on renewable energy vehicles. Out of the available renewable energy sources fuel cell is the only source which has reasonable efficiency and can be used in vehicles. But the main disadvantage of fuel cell is its slow response time. So energy storage systems like batteries and super capacitors are used in parallel with the fuel cell. Fuel cell is used during steady state vehicle operation while during transient conditions like starting, acceleration and braking batteries and super capacitors can supply or absorb energy. In this paper a unidirectional fuel cell DC-DC converter and bidirectional energy storage system DC-DC converter is proposed, which can interface dc sources at different voltage levels to the dc bus and also it can independently control the power flow from each energy source to the dc bus and vice versa. The proposed converters are designed and simulated using PSIM version 9.1.1 and gate pulse pattern, input and output voltage waveforms of the converters for steady state operation are studied.

Modelling and Control Design of a Dual Buck-Boost AC/DC Converter Used in the DC Nano-Grid

DEFF Research Database (Denmark)

Wu, Weimin; Liu, Yuan; Wang, Houqing

2016-01-01

Due to widely used DC characterized loads and more distributed power generation sources, the DC Nano-grid becomes more and more popular and seen as an alternative to the AC-grid in future. For the safety considerations, the DC Nano-grid should provide reliable grounding for the residential loads...... like the low voltage AC power system. In this paper, a dual Buck-Boost AC/DC converter for use in the united grounding configuration based DC Nano-grid with three terminal outputs is proposed. It will be much easy to construct an efficient DC Nano-grid based on the existing low AC power system by using...

Magnetically integrated high step-up resonant DC-DC converter for distributed photovoltaic systems

DEFF Research Database (Denmark)

Vinnikov, Dmitri; Chub, Andrii; Liivik, Elizaveta

2017-01-01

In this paper magnetically integrated resonant single-switch quasi-Z-source DC-DC converter is evaluated as a candidate topology for the low-cost photovoltaic microconverter. The derivation of the topology and its basic operation principle are explained. Generalized design guidelines...

Drilling history core hole DC-4

International Nuclear Information System (INIS)

1978-12-01

Core hole DC-4 was completed at a depth of 3998 feet in December, 1978 by Boyles Brothers Drilling Company, Spokane, Washington, under subcontract to Fenix and Scission, Inc. The hole was cored for the US Department of Energy and the Rockwell Hanford Operations' Basalt Waste Isolation Program. Fenix and Sicsson, Inc. furnished the engineering, daily supervision of the cable tool and core drilling activities, and geological core logging for DC-4. Core hole DC-4 is located on the Hanford Site about 3 miles east of the Yakima Barricade and approximately 103 feet southwest of rotary hole DC-5, which was completed to 3990 feet in February, 1978. Hanford Site coordinates reported for hole DC-4 are north 49,385.62 feet and west 85,207.63 feet, and Washington State coordinates are north 454,468.73 feet and east 2,209,990.87 feet. No elevation survey is available for hole DC-4, but it is approximately 745 feet above mean sea level based upon the survey of hole DC-5, which has a reported elevation of 745.16 feet on the top of the 3-inch flange. The purpose of core hole DC-4 was to core drill vertically through the basalt and interbed units for stratigraphic depth determination and core collection, and to provide a borehole for hydrologic testing, cross-hole seismic shear, and pressure wave velocity studies with rotary hole DC-5. Hole DC-4 was drilled through the overburden into basalt bedrock by cable tool methods (0-623 feet) and continuously cored through the final interval (623 to 3998 feet).Core recovery was 95.8 percent of the total footage cored

A novel ionic amphiphilic chitosan derivative as a stabilizer of nanoemulsions: Improvement of antimicrobial activity of Cymbopogon citratus essential oil.

Science.gov (United States)

Bonferoni, Maria Cristina; Sandri, Giuseppina; Rossi, Silvia; Usai, Donatella; Liakos, Ioannis; Garzoni, Alice; Fiamma, Maura; Zanetti, Stefania; Athanassiou, Athanassia; Caramella, Carla; Ferrari, Franca

2017-04-01

Amphiphilic chitosans have been recently proposed to improve delivery of poorly soluble drugs. In the present paper a derivative obtained by ionic interaction between chitosan and oleic acid was for the first time studied to physically stabilize o/w nanoemulsions of an antimicrobial essential oil, Cymbopogon citratus (Lemongrass), in a low energy and mild conditions emulsification process. The novel combination of spontaneous emulsification process with chitosan oleate amphiphilic properties resulted in a stable dispersion of a few hundred nanometer droplets. Positive zeta potential confirmed the presence of a chitosan shell around the oil droplets, which is responsible for the nanoemulsion physical stabilization and for the maintenance of chitosan bioactive properties, such as mucoadhesion. Cytotoxicity test was performed on four different cell lines (HEp-2, Caco-2, WKD and McCoy cells) showing biocompatibility of the system. The maintenance and in some cases even a clear improvement in the essential oil antimicrobial activity towards nine bacterial and ten fungal strains, all of clinical relevance was verified for Lemongrass nanoemulsion. Copyright © 2017. Published by Elsevier B.V.

DC-DC Type High-Frequency Link DC for Improved Power Quality of Cascaded Multilevel Inverter

Science.gov (United States)

Sadikin, Muhammad; Senjyu, Tomonobu; Yona, Atsushi

2013-06-01

Multilevel inverters are emerging as a new breed of power converter options for power system applications. Recent advances in power switching devices enabled the suitability of multilevel inverters for high voltage and high power applications because they are connecting several devices in series without the need of component matching. Usually, a transformerless battery energy storage system, based on a cascaded multilevel inverter, is used as a measure for voltage and frequency deviations. System can be reduced in size, weight, and cost of energy storage system. High-frequency link circuit topology is advantageous in realizing compact and light-weight power converters for uninterruptible power supply systems, new energy systems using photovoltaic-cells, fuel-cells and so on. This paper presents a DC-DC type high-frequency link DC (HFLDC) cascaded multilevel inverter. Each converter cell is implemented a control strategy for two H-bridge inverters that are controlled with the same multicarrier pulse width modulation (PWM) technique. The proposed cascaded multilevel inverter generates lower voltage total harmonic distortion (THD) in comparison with conventional cascaded multilevel inverter. Digital simulations are carried out using PSCAD/EMTDC to validate the performance of the proposed cascaded multilevel inverter.

Wide Temperature Range DC-DC Boost Converters for Command/Control/Drive Electronics, Phase I

Data.gov (United States)

National Aeronautics and Space Administration — We shall develop wide temperature range DC-DC boost converters that can be fabricated using commercial CMOS foundries. The boost converters will increase the low...

DC Microgrids—Part II

DEFF Research Database (Denmark)

Dragicevic, Tomislav; Lu, Xiaonan; Quintero, Juan Carlos Vasquez

2016-01-01

distribution applications such as traction, telecom, vehicular and distributed power systems can be classified under DC MG framework and ongoing development and expansion of the field is largely influenced by concepts used over there. This paper aims firstly to shed light on the practical design aspects of DC...... MG technology concerning typical power hardware topologies and their suitability for different emerging smart grid applications. Then, an overview of the state of the art in DC MG protection and grounding is provided. Owing to the fact that there is no zero current crossing, an arc that appears upon...

Selection of DC/DC converter for offshore wind farms with MVDC power collection

DEFF Research Database (Denmark)

Dincan, Catalin Gabriel; Kjær, Philip Carne; Chen, Yu-Hsing

2017-01-01

Four DC/DC converters are analyzed and compared with respects to availability, efficiency, ratings, repair costs and power density. Intended application is offshore wind farms with MVDC power collection. The selected topology is a new series resonant converter, which offers 99% efficiency across...

Integrated Three-Port DC-DC Converter for Photovoltaic (PV) Battery Stand-alone Systems

DEFF Research Database (Denmark)

Ouyang, Ziwei; Andersen, Michael A. E.

2016-01-01

of solar energy. Moreover, a novel transformer configuration enables variable turns ratio controlled by the phase between the two current excitations subjected to the primary windings, allowing a wider input/output range. 1 kW experimental prototype has been built to demonstrate a wellmanaged power flow......Several power sources such as PV solar arrays and battery are often used to manage the power flow for a photovoltaic (PV) based stand-alone power system due to the fluctuation nature of solar energy resource, and deliver a continuous power to the users in an appropriate form. Traditionally, three...... different single-input single-output (SISO) dc/dc converters would have been used. To reduce the cost and improve the power density of the system, an integrated three-port isolated dc/dc converter is proposed in this paper. It can realize all functions of the energy delivery due to the fluctuation nature...

Integrating DC/DC Conversion with Possible Reconfiguration within Submodule Solar Photovoltaic Systems

Science.gov (United States)

Huang, Peter Jen-Hung

This research first proposes a method to merge photovoltaic (PV) cells or PV panels within the internal components DC-DC converters. The purpose of this merged structure is to reconfigure the PV modules between series and parallel connections using high switching frequencies (hundreds of kHz). This leads to multi-levels of voltages and currents that become applied to the output filter of the converter. Further, this research introduces a concept of a switching cell that utilizes the reconfiguration of series and parallel connections in DC-DC converters. The switching occurs at high switching frequency and the switches can be integrated to be within the solar panels or in between the solar cells. The concept is generalized and applied to basic buck and boost topologies. As examples of the new types of converters: reconfigurable PV-buck and PV-boost converter topologies are presented. It is also possible to create other reconfigurable power converters: non-isolated and isolated topologies. Analysis, simulation and experimental verification for the reconfigurable PV-buck and PV-boost converters are presented extensively to illustrate proof of concept. Benefits and drawbacks of the new approach are discussed. The second part of this research proposes to utilize the internal solar cell capacitance and internal solar module wire parasitic inductances to replace the input capacitor and filter inductor in boost derived DC-DC converters for energy harvesting applications. High switching frequency (MHz) hard switched and resonant boost converters are proposed. Their analysis, simulation and experimental prototypes are presented. A specific proof-of-concept application is especially tested for foldable PV panels, which are known for their high internal wire inductance. The experimental converters successfully boost solar module voltage without adding any external input capacitance or filter inductor. Benefits and drawbacks of new proposed PV submodule integrated boost

Soft switching bidirectional DC-DC converter for ultracapacitor-batteries interface

Energy Technology Data Exchange (ETDEWEB)

Adib, Ehsan; Farzanehfard, Hosein [Dept. of Electrical and Computer Engineering, Isfahan Univ. of Technology (Iran)

2009-12-15

In this paper a new soft switching bidirectional DC-DC converter is introduced which can be applied as the interface circuit between ultracapacitors and batteries or fuel cells. All semiconductor devices in the proposed converter are soft switched while the control circuit remains PWM. Due to achieved soft switching condition, the energy conversion through the proposed converter is highly efficient. The proposed converter is analyzed and a prototype converter is implemented. The presented experimental results confirm the theoretical analysis. (author)

Retrospective evaluation of early and aggressive decompressive craniectomy (DC) for severe head injury. Was that DC necessary?

International Nuclear Information System (INIS)

Hagihara, Yasushi; Ueno, Masato; Mizushima, Yasuaki; Matsuoka, Tetsuya

2011-01-01

Recently, decompressive craniectomy (DC) for refractory intracranial hypertension (IH) has been widely reevaluated, and many researchers support the advantages of early and aggressive DC in the management of severe head trauma. We too applied DC in the early stages of IH, and confirmed its favorable results compared to those of the standard treatment. In patients with evacuate masses (EM), DC was determined based on the intraoperative condition of the brain parenchyma; in those without EM, intracranial pressure (ICP) ≥30 mmHg was considered the criterion for DC. However, in some cases, the expected brain edema (BE) was absent after DC, and DC seemed unnecessary on retrospection. Here, the effectiveness of DC performed at our hospital and its predictive factors were investigated. Of the 26 DCs performed in the past 3.5 years, 9 were ineffective because the expected BEs were absent on postoperative computed tomography. In those 9 cases, the Glasgow coma scale (GCS) scores and D-dimer of fibrinogen degradation product (FDP-DD) were significantly higher and lower, respectively, than those of the control group. Patients with EM showed similar trends regarding the GCS score and FDP-DD, both of which are probable indicators of BE. In patients without EM, the GCS score and FDP-DD were normal, but their base excess at admission was significantly low with increased ICP, requiring DC. GCS score and FDP-DD may represent the extent of mechanically damaged brain, and this may explain their relation with DC effectiveness in patients with EM. In patients without EM and with mild brain damage, base excess that reflects the respiratory or circulatory disorder should be the predictor for BE. (author)

Exploration of Charge Recycling DC-DC Conversion Using a Switched Capacitor Regulator

Directory of Open Access Journals (Sweden)

Mircea R. Stan

2013-07-01

Full Text Available The increasing popularity of DVFS (dynamic voltage frequency scaling schemes for portable low power applications demands highly efficient on-chip DC-DC converters. The primary aim of this work is to enable increased efficiency of on-chip DC-DC conversion for near-threshold operation of multicore chips. The idea is to supply nominal (high off-chip voltage to the cores which are then “voltage-stacked” to generate the near-threshold (low voltages based on Kirchhoff’s voltage law through charge recycling. However, the effectiveness of this implicit down-conversion is affected by the current imbalance among the cores. The paper presents a design methodology and optimization strategy for highly efficient charge recycling on-chip regulation using a push-pull switched capacitor (SC circuit. A dual-boundary hysteretic feedback control circuit has been designed for stacked loads. A stacked-voltage domain with its self-regulation capability combined with a SC converter has shown average efficiency of 78%–93% for 2:1 down-conversion with ILoad (max of 200 mA and workload imbalance varying from 0–100%.

Hierarchical Control for Multiple DC-Microgrids Clusters

DEFF Research Database (Denmark)

Shafiee, Qobad; Dragicevic, Tomislav; Vasquez, Juan Carlos

2014-01-01

DC microgrids (MGs) have gained research interest during the recent years because of many potential advantages as compared to the ac system. To ensure reliable operation of a low-voltage dc MG as well as its intelligent operation with the other DC MGs, a hierarchical control is proposed in this p......DC microgrids (MGs) have gained research interest during the recent years because of many potential advantages as compared to the ac system. To ensure reliable operation of a low-voltage dc MG as well as its intelligent operation with the other DC MGs, a hierarchical control is proposed...

High-Efficiency High Step-Up DC-DC Converter with Dual Coupled Inductors for Grid-Connected Photovoltaic Systems

DEFF Research Database (Denmark)

Forouzesh, Mojtaba; Shen, Yanfeng; Siwakoti, Yam Prasad

2018-01-01

with a common ground connection of the input and output make the proposed topology a proper candidate for a transformer-less grid connected photovoltaic systems. The operating performance, analysis and mathematical derivations of the proposed dc-dc converter have been demonstrated in the paper. Moreover......This paper introduces a non-isolated high step-up dc-dc converter with dual coupled inductors suitable for distributed generation applications. By implementing an input parallel connection, the proposed dc-dc structure inherits shared input current with low ripple, which also requires small...... capacitive filter at its input. Moreover, this topology can reach high voltage gain by using dual coupled inductors in series connection at the output stage. The proposed converter uses active clamp circuits with a shared clamp capacitor for the main switches. In addition to the active clamp circuit...

Design and Implementation of Anti-windup PI Control on DC-DC Bidirectional Converter for Hybrid Vehicle Applications

Directory of Open Access Journals (Sweden)

Muh. Zakiyullah Romdlony

2012-07-01

Full Text Available Well-regulated DC bus voltage is the important point to guarantee the power demand in hybrid vehicle applications. Voltage regulation can be achieved with control method that build switching signal on DC-DC converter. This paper describes design and small scale experimental results of bus voltage regulation control of the DC-DC bidirectional converter with battery and supercapacitor as energy source. The control system consists of two control loops, the outer loop that get DC bus voltage feedback using PI anti-windup back calculation control method. This outer loop will generate a reference current for the inner loop that implement hysteresis control. The inner control loop will compare that reference curent with the source current obtained from the current sensor. Simulation and experimental results show that bus voltage is well-regulated under the load changes with 1% voltage ripple.

Light-weight DC to very high voltage DC converter

Energy Technology Data Exchange (ETDEWEB)

Druce, Robert L. (Union City, CA); Kirbie, Hugh C. (Dublin, CA); Newton, Mark A. (Livermore, CA)

1998-01-01

A DC-DC converter capable of generating outputs of 100 KV without a transformer comprises a silicon opening switch (SOS) diode connected to allow a charging current from a capacitor to flow into an inductor. When a specified amount of charge has flowed through the SOS diode, it opens up abruptly; and the consequential collapsing field of the inductor causes a voltage and current reversal that is steered into a load capacitor by an output diode. A switch across the series combination of the capacitor, inductor, and SOS diode closes to periodically reset the SOS diode by inducing a forward-biased current.

Current Mode Control for LLC Series Resonant DC-to-DC Converters

OpenAIRE

Jinhaeng Jang; Syam Kumar Pidaparthy; Byungcho Choi

2015-01-01

Conventional voltage mode control only offers limited performance for LLC series resonant DC-to-DC converters experiencing wide variations in operational conditions. When the existing voltage mode control is employed, the closed-loop performance of the converter is directly affected by unavoidable changes in power stage dynamics. Thus, a specific control design optimized at one particular operating point could become unacceptable when the operational condition is varied. This paper presents a...

Floating high step-down stacked dc-dc converter based on buck-boost cells

NARCIS (Netherlands)

Tibola, G.; Duarte, J.L.; Blinov, A.

2015-01-01

In some high power dc-dc applications, where high voltage is present, a converter with high step-down ratio is required in order to provide an isolated low power auxiliary supply. This requirement represents a challenge and many topologies are currently being researched. The analysis of a

UNJUK KERJA PENGUBAH TEGANGAN DC-DC TOPOLOGI BOOST DENGAN NILAI INDUKTANSI DAN KAPASITANSI YANG DIOPTIMASI PADA KEADAAN TRANSIEN

Directory of Open Access Journals (Sweden)

I Wayan Arta Wijaya

2009-05-01

Full Text Available Pengubah daya DC-DC topologi boost dapat menghasilkan tegangan yang lebih tinggi dari tegangan input dengan riak (ripple yang kecil dan efisiensi yang cukup tinggi. Nilai dari sebuah induktansi dan kapasitansi dari pengubah daya DC-DC dengan menggunakan topologi boost dioptimalkan menggunakan analisa transien. Fungsi ini diatur berdasarkan pada analisa dari pengubah daya selama kondisi transien. Nilai induktansi dan kapasitansi yang telah dioptimalkan dengan perhitungan dibandingkan dalam simulasi pada pengubah daya DC-DC dan hasilnya akan dibuktikan dengan menggunakan hasil percobaan. Nilai optimal untuk kapasitor dan induktor pada frekuensi 666,7 Hz, siklus kerja (duty cycle 66,7 %, resistansi output 36 Ώ dan tegangan input 12 volt adalah 1038 μF dan 11,9 mH

Rhesus macaque and chimpanzee DC-SIGN act as HIV/SIV gp120 trans-receptors, similar to human DC-SIGN

NARCIS (Netherlands)

Geijtenbeek, T. B.; Koopman, G.; van Duijnhoven, G. C.; van Vliet, S. J.; van Schijndel, A. C.; Engering, A.; Heeney, J. L.; van Kooyk, Y.

2001-01-01

Dendritic cells (DC) have been implicated in the pathogenesis of both human and simian immunodeficiency viruses (HIV and SIV, respectively). The DC-specific HIV-1 trans-receptor DC-SIGN is thought to be essential for viral dissemination by DC. Abundant expression in lymphoid tissues also implies a

The Chaotic-Based Control of Three-Port Isolated Bidirectional DC/DC Converters for Electric and Hybrid Vehicles

Directory of Open Access Journals (Sweden)

Zheng Wang

2016-01-01

Full Text Available Three-port isolated (TPI bidirectional DC/DC converters have three energy ports and offer advantages of large voltage gain, galvanic isolation ability and high power density. For this reason this kind of converters are suitable to connect different energy sources and loads in electric and hybrid vehicles. The purpose of this paper is to propose chaotic modulation and the related control scheme for TPI bidirectional DC/DC converters, in such a way that the switching harmonic peaks can be suppressed in spectrum and the conducted electromagnetic interference (EMI is reduced. Two chaotic modulation strategies, namely the continuously chaotic modulation and the discretely chaotic modulation are presented. These two chaotic modulation strategies are applied for TPI bidirectional DC/DC converters with shifted-phase angle based control and phase-shifted PWM control. Both simulation and experiments are given to verify the validity of the proposed chaotic modulation-based control schemes.

A Markovian Approach Applied to Reliability Modeling of Bidirectional DC-DC Converters Used in PHEVs and Smart Grids

Directory of Open Access Journals (Sweden)

M. Khalilzadeh

2016-12-01

Full Text Available In this paper, a stochastic approach is proposed for reliability assessment of bidirectional DC-DC converters, including the fault-tolerant ones. This type of converters can be used in a smart DC grid, feeding DC loads such as home appliances and plug-in hybrid electric vehicles (PHEVs. The reliability of bidirectional DC-DC converters is of such an importance, due to the key role of the expected increasingly utilization of DC grids in modern Smart Grid. Markov processes are suggested for reliability modeling and consequently calculating the expected effective lifetime of bidirectional converters. A three-leg bidirectional interleaved converter using data of Toyota Prius 2012 hybrid electric vehicle is used as a case study. Besides, the influence of environment and ambient temperature on converter lifetime is studied. The impact of modeling the reliability of the converter and adding reliability constraints on the technical design procedure of the converter is also investigated. In order to investigate the effect of leg increase on the lifetime of the converter, single leg to five-leg interleave DC-DC converters are studied considering economical aspect and the results are extrapolated for six and seven-leg converters. The proposed method could be generalized so that the number of legs and input and output capacitors could be an arbitrary number.

PI and Fuzzy Control Strategies for High Voltage Output DC-DC Boost Power Converter - Hardware Implementation and Analysis

DEFF Research Database (Denmark)

Padmanaban, Sanjeevi Kumar; Blaabjerg, Frede; Siano, Pierluigi

2016-01-01

This paper presents the control strategies by Proportional-Integral (P-I) and Fuzzy Logic (FL) for a DC-DC boost power converter for high output voltage configuration. Standard DC-DC converters are traditionally used for high voltage direct current (HVDC) power transmission systems. But, lack its...... converter with inbuilt voltage-lift technique and overcome the aforementioned deficiencies. Further, the control strategy is adapted based on proportional-integral (P-I) and fuzzy logic, closed-loop controller to regulate the outputs and ensure the performances. Complete hardware prototype of EHV converter...... performances in terms of efficiency, reduced transfer gain and increased cost with sensor units. Moreover, the internal self-parasitic components reduce the output voltage and efficiency of classical high voltage converters (HVC). This investigation focused on extra high-voltage (EHV) DC-DC boost power...

A Novel Quasi-SEPIC High-Voltage Boost DC-DC Converter

DEFF Research Database (Denmark)

Siwakoti, Yam Prasad; N. Soltani, Mohsen; Blaabjerg, Frede

2017-01-01

This paper proposes a modified coupled-inductor SEPIC dc-dc converter for low power and high voltage gain applications such as for piezoelectric drive systems. The converter uses the same components as of SEPIC converter with an additional diode. Compared to conventional topologies with similar...... voltage gain expression, the proposed topology uses less components to achieve same or even higher voltage gain. This helps to design a very compact and light weight converter with higher power density at lower cost. Due to brevity, the principle of operation, theoretical analysis and comparison supported...

Properties of DLC coatings deposited by dc and dc with superimposed pulsed vacuum arc

International Nuclear Information System (INIS)

Zavaleyev, V.; Walkowicz, J.; Aksyonov, D.S.; Luchaninov, A.A.; Reshetnyak, E.N.; Strel'nitskij, V.E.

2014-01-01

Comparative studies of the structure, mechanical and tribological properties of DLC coatings deposited in DC and DC with superimposed high current pulse modes of operation vacuum-arc plasma source with the graphite cathode are presented. Imposition the pulses of high current on DC vacuum-arc discharge allows both increase the deposition rate of DLC coating and reduce the residual compressive stress in the coatings what promotes substantial improvement the adhesion to the substrate. Effect of vacuum arc plasma filtration with Venetian blind filter on the deposition rate and tribological characteristics of the coatings analyzed.

Light-weight DC to very high voltage DC converter

Science.gov (United States)

Druce, R.L.; Kirbie, H.C.; Newton, M.A.

1998-06-30

A DC-DC converter capable of generating outputs of 100 KV without a transformer comprises a silicon opening switch (SOS) diode connected to allow a charging current from a capacitor to flow into an inductor. When a specified amount of charge has flowed through the SOS diode, it opens up abruptly; and the consequential collapsing field of the inductor causes a voltage and current reversal that is steered into a load capacitor by an output diode. A switch across the series combination of the capacitor, inductor, and SOS diode closes to periodically reset the SOS diode by inducing a forward-biased current. 1 fig.

The 25 kW resonant dc/dc power converter

Science.gov (United States)

Robson, R. R.

1983-01-01

The feasibility of processing 25-kW of power with a single, transistorized, series resonant converter stage was demonstrated by the successful design, development, fabrication, and testing of such a device which employs four Westinghouse D7ST transistors in a full-bridge configuration and operates from a 250-to-350 Vdc input bus. The unit has an overall worst-case efficiency of 93.5% at its full rated output of 1000 V and 25 A dc. A solid-state dc input circuit breaker and output-transient-current limiters are included in and integrated into the design. Full circuit details of the converter are presented along with the test data.

DC grid for home applications

Science.gov (United States)

Elangovan, D.; Archana, R.; Jayadeep, V. J.; Nithin, M.; Arunkumar, G.

2017-11-01

More than fifty percent Indian population do not have access to electricity in daily lives. The distance between the power generating stations and the distribution centers forms one of the main reasons for lack of electrification in rural and remote areas. Here lies the importance of decentralization of power generation through renewable energy resources. In the present world, electricity is predominantly powered by alternating current, but most day to day devices like LED lamps, computers and electrical vehicles, all run on DC power. By directly supplying DC to these loads, the number of power conversion stages was reduced, and overall system efficiency increases. Replacing existing AC network with DC is a humongous task, but with power electronic techniques, this project intends to implement DC grid at a household level in remote and rural areas. Proposed work was designed and simulated successfully for various loads amounting to 250 W through appropriate power electronic convertors. Maximum utilization of the renewable sources for domestic and commercial application was achieved with the proposed DC topology.

Effects of aquous and ethanolic extracts of vegetal species on seed germination of Brachiaria decumbens Stapf/ Ação de extratos aquoso e etanólico de espécies vegetais na germinação de sementes de Brachiaria decumbens Stapf

Directory of Open Access Journals (Sweden)

Ricardo Augusto Gorne Viani

2002-05-01

Full Text Available The objective of this study was to evaluate the effects of aquous and ethanolic extracts of medicinal species on seed germination of B. decumbens. The experimental design was completely randomized with 19 treatments (9 aquous extracts, 9 ethanolic extracts and a check was deionized water with 4 replicates. The species and organs used to obtain the extracts were Baccharis trimera (shoot, Baccharis articulata (shoot, Canna denudata (leaves, Cymbopogom citratus (leaves, Eucalyptus citriodora (leaves, Lippia alba (leaves and branches, Momordica charantia (leaves, branches, flowers, fruits and seeds, Ocimum gratissimum (leaves, branches and flowers e Ruta graveolens (leaves and branches. The extracts were obtained by aquous and ethanolic infusions in 10% and 1% concentration respectively. The seeds were treated with extracts for one hour and after this time sowed in plastic boxes. They were maintained in germination chamber (BOD with 16 hours of dark/20ºC and 8 hours of light/35ºC. The evaluation were made at 7Th and 21st days after seeding (DAS. The extraction methods affected seed germination. The use of aquous extract showed greater germination percentage than the ethanolic one at 7Th and 21st days. The evaluated extracts did not affect the seeds’ germination.O objetivo do experimento foi avaliar o efeito dos extratos aquoso e etanólico de espécies medicinais sobre germinação de sementes de B. decumbens. O delineamento experimental foi inteiramente casualizado com 19 tratamentos (9 extratos aquosos, 9 extratos etanólicos e 1 testemunha com água deionizada com quatro repetições. As espécies e as partes das plantas utilizadas para a obtenção dos extratos foram Baccharis trimera (caule, Baccharis articulata (caule, Canna denudata (folhas, Cymbopogom citratus (folhas, Eucalyptus citriodora (folhas, Lippia alba (folhas e ramos, Momordica charantia (folhas, ramos, flores, frutos e sementes, Ocimum gratissimum (folhas, ramos e flores e

Static and Dynamic Characteristics of DC-DC Converter Using a Digital Filter

Science.gov (United States)

Kurokawa, Fujio; Okamatsu, Masashi

This paper presents the regulation and dynamic characteristics of the dc-dc converter with digital PID control, the minimum phase FIR filter or the IIR filter, and then the design criterion to improve the dynamic characteristics is discussed. As a result, it is clarified that the DC-DC converter using the IIR filter method has superior performance characteristics. The regulation range is within 1.3%, the undershoot against the step change of the load is less than 2% and the transient time is less than 0.4ms with the IIR filter method. In this case, the switching frequency is 100kHz and the step change of the load R is from 50 Ω to 10 Ω. Further, the superior characteristics are obtained when the first gain, the second gain and the second cut-off frequency are relatively large, and the first cut-off frequency and the passing frequency are relatively low. Moreover, it is important that the gain strongly decreases at the second cut-off frequency because the upper band pass frequency range must be always less than half of the sampling frequency based on the sampling theory.

DC-Compensated Current Transformer †

Science.gov (United States)

Ripka, Pavel; Draxler, Karel; Styblíková, Renata

2016-01-01

Instrument current transformers (CTs) measure AC currents. The DC component in the measured current can saturate the transformer and cause gross error. We use fluxgate detection and digital feedback compensation of the DC flux to suppress the overall error to 0.15%. This concept can be used not only for high-end CTs with a nanocrystalline core, but it also works for low-cost CTs with FeSi cores. The method described here allows simultaneous measurements of the DC current component. PMID:26805830

Reliability study of high gain DC-DC converters based on RRPP I-IIA ...

Indian Academy of Sciences (India)

J DIVYA NAVAMANI

2018-05-10

May 10, 2018 ... Energy Storage Modules (ESM), Propulsion Motor Mod- ules (PMM) and ... All Electric Ship (AES) is the best way to power all the loads in the ship ... also used to derive quadratic step down DC-DC converters. [6]. The attractive ...... Exhibition on Ecological Vehicles and Renewable Energies,. TamilNadu ...

Influence of DC arc jets on flow fields analyzed by an integrated numerical model for a DC-RF hybrid plasma

International Nuclear Information System (INIS)

Seo, Jun Ho; Park, Jin Myung; Hong, Sang Hee

2008-01-01

The influence of DC arc jets on the flow fields in a hybrid plasma torch is numerically analyzed by an integrated direct current-radio frequency (DC-RF) plasma model based on magneto-hydrodynamic formulations. The calculated results reveal that the increase in DC arc gas flow rate raises the axial flow velocity along the central column of the DC-RF hybrid plasma together with the enhanced backflow streams in the peripheral wall region. The temperature profiles on the torch exit plane are little affected due to the reheating process of the central column by the combined RF plasma. Accordingly, the exit enthalpy emitted from the DC-RF hybrid torch can be concentrated to the central column of the plasma and controlled by adjusting the DC arc gas flow rate. The swirl in the sheath gas flow turns out to have the opposite effect on the DC arc gas flow rate. The swirling motion of the sheath gas can reduce the back flows near the induction tube wall as well as the axial velocities in the central column of the plasma. Accordingly, the swirl in the sheath gas flow can be used for the functional operation of the DC-RF hybrid plasma along with the DC arc gas flow rate to suppress the back flows at the wall region and to reduce the excessive interactions between the DC arc jet and the ambient RF plasmas. The effects of DC input current on the flow fields of hybrid plasma are similar to those of the DC arc gas flow rate, but the axial velocities for the higher current relatively quickly decay along the centerline. This is in contrast to the increase in the axial velocity remaining in proportion to the increase in the DC arc gas flow rate all the way up to the exit of the DC-RF hybrid plasma. Accordingly, the present integrated numerical analysis suggests that the hybrid plasma field profiles and the entrainment of ambient air from the torch exit are controllable by adjusting the DC arc gas flow rate, the DC input current and swirl in the sheath gas flow taking advantage of

Dilation and Curettage (D&C)

Science.gov (United States)

... For Patients About ACOG Dilation and Curettage (D&C) Home For Patients Search FAQs Dilation and Curettage ( ... February 2016 PDF Format Dilation and Curettage (D&C) Special Procedures What is dilation and curettage (D& ...

Ultrahigh-density trench cpacitors in silicon and their application to integrated DC-DC conversion

NARCIS (Netherlands)

Roozeboom, F.; Bergveld, H.J.; Nowak, K.; Le Cornec, F.; Guiraud, L.; Bunel, C.; Iochem, S.; Ferreira, J.; Ledain, S.; Pieraerts, E.; Pommier, M.

2009-01-01

This paper addresses silicon-based integration of passive components applied to 3D integration with dies of other technologies within one package. Particularly, the development of high-density trench capacitors has enabled the realization of small-formfactor DC-DC converters. As illustration, an

Spectral shaping of a randomized PWM DC-DC converter using maximum entropy probability distributions

CSIR Research Space (South Africa)

Dove, Albert

2017-01-01

Full Text Available maintaining constraints in a DC-DC converter is investigated. A probability distribution whose aim is to ensure maximal harmonic spreading and yet mainaint constraints is presented. The PDFs are determined from a direct application of the method of Maximum...

Fotossíntese foliar do capim-xaraés [Brachiaria brizantha (A. Rich.) Stapf. cv. Xaraés] e modelagem da assimilação potencial de dosséis sob estratégias de pastejo rotativo

OpenAIRE

Pedreira,Bruno Carneiro e; Pedreira,Carlos Guilherme Silveira

2007-01-01

Objetivou-se com este trabalho quantificar a fotossíntese foliar ao longo do período de rebrotação e modelar a fotossíntese de dosséis vegetativos em função da arquitetura foliar e do ambiente luminoso em pastagens de capim-xaraés [Brachiaria brizantha (A. Rich.) Stapf.] submetidas a estratégias contrastantes de pastejo rotativo. Na fase inicial de rebrotação, o potencial fotossintético foi pequeno, em média 10,4 µmol CO2 m-2 s-1 e, no tratamento de maior intervalo de pastejo (100% IL), esse ...

Programmable dc motor controller

Science.gov (United States)

Hopwood, J. E.

1982-11-01

A portable programmable dc motor controller, with features not available on commercial instruments was developed for controlling fixtures during welding processes. The controller can be used to drive any dc motor having tachometer feedback and motor requirements not exceeding 30 volts, 3 amperes. Among the controller's features are delayed start time, upslope time, speed, and downslope time.

Hybrid Non-Isolated and Non Inverting Nx Interleaved DC-DC Multilevel Boost Converter for Renewable Energy Applications

DEFF Research Database (Denmark)

Bhaskar, Mahajan Sagar; Kulkarni, Rishi M.; Padmanaban, Sanjeevi Kumar

2016-01-01

In this paper hybrid non isolated/ non inverting Nx interleaved DC-DC multilevel Boost Converter for renewable energy applications is presented. The presented hybrid topology is derived from the conventional interleaved converter and the Nx Multilevel boost converter. In renewable energy...... applications, generated energy cannot be directly used at application end. In most of the cases it needs to be stepped up with DC-DC converter at operating voltage levels as per the requirement of the application. Though conventional boost converter can theoretically be used for this purpose, but obtaining...

A comprehensive analysis and hardware implementation of control strategies for high output voltage DC-DC boost power converter

OpenAIRE

Padmanaban, Sanjeevikumar; Grandi, Gabriele; Blaabjerg, Frede; Wheeler, Patrick; Siano, Pierluigi; Hammami, Manel

2017-01-01

Classical DC-DC converters used in high voltage direct current (HVDC) power transmission systems, lack in terms of efficiency, reduced transfer gain and increased cost with sensor (voltage/current) numbers. Besides, the internal self-parasitic behavior of the power components reduces the output voltage and efficiency of classical HV converters. This paper deals with extra high-voltage (EHV) dc-dc boost converter by the application of voltage-lift technique to overcome the aforementioned defic...

Direct switching control of DC-DC power electronic converters using hybrid system theory

Energy Technology Data Exchange (ETDEWEB)

Zhao, J.; Lin, F. [Wayne State Univ., Detroit, MI (United States). Dept. of Electrical and Computer Engineering; Wang, C. [Wayne State Univ., Detroit, MI (United States). Dept. of Electrical and Computer Engineering; Wayne State Univ., Detroit, MI (United States). Div. of Engineering Technology

2010-07-01

A direct switching control (DSC) scheme for power electronics converters was described. The system was designed for use in both traditional and renewable energy applications as well as in electric drive vehicles. The proposed control scheme was based on a detailed hybrid system converter model that used model predictive control (MPC), piecewise affine (PWA) approximations and constrained optimal control methods. A DC-DC converter was modelled as a hybrid machine. Switching among different modes of the DC-DC converter were modelled as discrete events controlled by the hybrid controller. The modelling scheme was applied to a Buck converter. The DSC was used to control the switch of the power converter based on a hybrid machine model. Results of the study showed that the method can be used to regulate output voltage and inductor currents. The method also provides fast transient responses and effectively regulates both currents and voltage. The controller can be used to provide immediate responses to dynamic disturbances and output voltage fluctuations. 23 refs., 7 figs.

Informational model verification of ZVS Buck quasi-resonant DC-DC converter

Science.gov (United States)

Vakovsky, Dimiter; Hinov, Nikolay

2016-12-01

The aim of the paper is to create a polymorphic informational model of a ZVS Buck quasi-resonant DC-DC converter for the modeling purposes of the object. For the creation of the model is applied flexible open standards for setting, storing, publishing and exchange of data in distributed information environment. The created model is useful for creation of many and different by type variants with different configuration of the composing elements and different inner model of the examined object.

Switched capacitor DC-DC converter with switch conductance modulation and Pesudo-fixed frequency control

DEFF Research Database (Denmark)

Larsen, Dennis Øland; Vinter, Martin; Jørgensen, Ivan Harald Holger

A switched capacitor dc-dc converter with frequency-planned control is presented. By splitting the output stage switches in eight segments the output voltage can be regulated with a combination of switching frequency and switch conductance. This allows for switching at predetermined frequencies, 31...

A Novel Dual-input Isolated Current-Fed DC-DC Converter for Renewable Energy System

DEFF Research Database (Denmark)

Zhang, Zhe; Thomsen, Ole Cornelius; Andersen, Michael A. E.

2010-01-01

In this paper, a novel isolated current-fed DC-DC converter (boost-type) with two input power sources based on multi-transformer structure, which is suitable for fuel cells and super-capacitors hybrid energy system, is proposed and designed. With particular transformer windings connection strategy...

Experience from design, prototyping and production of a DC-DC conversion powering scheme for the CMS Phase-1 Pixel Upgrade

International Nuclear Information System (INIS)

Feld, L.; Karpinski, W.; Klein, K.; Lipinski, M.; Preuten, M.; Rauch, M.; Schmitz, S.; Wlochal, M.

2016-01-01

The CMS collaboration has adopted a DC-DC conversion powering scheme for the Phase-1 Upgrade of its pixel detector. DC-DC buck converters with a conversion ratio of around 3 are installed on the support structures, outside of the sensitive tracking region, requiring a re-design of the low and high voltage distribution to the pixel modules. After several years of R and D, the project has entered the production phase. A total of 1800 DC-DC converters are being produced, and rigorous quality assurance and control is being employed during the production process. The testing program is outlined, results from mass production are presented and issues that have been encountered are described. In addition, two system level challenges, namely the choice of output voltage in the presence of large, load-dependent voltage drops, and the thermal management required to remove the heat load caused by the DC-DC converters, are discussed

Analytical Comparison of Dual-Input Isolated dc-dc Converter with an ac or dc Inductor for Renewable Energy Systems

DEFF Research Database (Denmark)

Zhang, Zhe; Mira Albert, Maria del Carmen; Andersen, Michael A. E.

2017-01-01

This paper presents two configurations of dualinput (DI) or three-port (TPC) isolated dc-dc converters for hybrid renewable energy systems such as photovoltaics and batteries. These two converters are derived by integrating an interleaved boost converter and a single-active bridge converter...... and control perspective, distinct in operation principles, voltage/power transfer functions, loss distributions, soft-switching constraints, and power efficiency under the same operating conditions. Moreover, the inductor design differs greatly between these two cases. In this paper, a comprehensive...

Analysis of a high power, resonant DC-DC converter for DC wind turbines

DEFF Research Database (Denmark)

Dincan, Catalin Gabriel; Kjær, Philip Carne; Chen, Yu-Hsing

2018-01-01

This paper is introducing a new method of operation for a series resonant converter, with intended application in megawatt high-voltage DC wind turbines. Compared to a frequency controlled series resonant converter operated in sub resonant mode, the method (entitled pulse removal technique) allows...

High-Efficiency Photovoltaic System Using Partially-Connected DC-DC Converter

Science.gov (United States)

Uno, Masatoshi; Kukita, Akio; Tanaka, Koji

Power conversion electronics for photovoltaic (PV) systems are desired to operate as efficiently as possible to exploit the power generated by PV modules. This paper proposes a novel PV system in which a dc-dc converter is partially connected to series-connected PV modules. The proposed system achieves high power-conversion efficiency by reducing the passing power and input/output voltages of the converter. The theoretical operating principle was experimentally validated. Resultant efficiency performances of the proposed and conventional systems demonstrated that the proposed system was more efficient in terms of power conversion though the identical converter was used for the both systems.

Very High Frequency Resonant DC/DC Converters for LED Lighting

DEFF Research Database (Denmark)

Madsen, Mickey Pierre; Knott, Arnold; Andersen, Michael A. E.

2013-01-01

This paper presents a very high frequency DC/DC converter for LED lighting. Several resonant topologies are compared and their usability discussed. At the end the resonant SEPIC converter is chosen based on the achievable power density and total bill of material. Simulations of a 51 MHz converter...... with 40 V input and 15 V output are made. The simulation shows possibility of achieving efficiency up to 87 % even with a HEXFET Power MOSFET. Three prototypes of the simulated converter are implemented showing good correlation with simulations. The prototypes have efficiencies up to 84 % and power...

A THREE-PHASE BOOST DC-AC CONVERTER

African Journals Online (AJOL)

dc-ac converter (inverter) based on the dc-dc boost converters. ... Sliding mode controllers are designed to perform a robust control for the ... Computer simulations and spectral analysis demon- ... the conventional three-phase buck inverter,.

Linking DC together with TRSL

DEFF Research Database (Denmark)

Haxthausen, Anne; Yong, Xia

1999-01-01

In this talk we present a method for linking the Duration Calculus together with the Timed RAISE Specification Language. Duration Calculus (DC) [ZHR91] is an interval-based real time logic, which can be used naturally in capturing and eliciting users' real time requirements in the form of constra......In this talk we present a method for linking the Duration Calculus together with the Timed RAISE Specification Language. Duration Calculus (DC) [ZHR91] is an interval-based real time logic, which can be used naturally in capturing and eliciting users' real time requirements in the form.......TRSL is a real-time extension of the RAISE Specification Language (RSL) [Rlg92] which together with its associated method [Rmg95]and tools has shown to be very useful in the industrial development of software systems. Therefore, a promising approach for the development of real-time systemscould be to use DC...... for high-level specifications of real-time requirementsand TRSL for specifying real-time implementations in the form of timed communicating concurrent processes.In order to link DC and TRSL together in a well-founded way, we formally define what it means for a TRSL process to satisfy a DC requirement...

A Four-Phase High Voltage Conversion Ratio Bidirectional DC-DC Converter for Battery Applications

Directory of Open Access Journals (Sweden)

Li-Kun Xue

2015-06-01

Full Text Available This study presents a four-phase interleaved high voltage conversion ratio bidirectional DC-DC converter circuit based on coupled inductors and switched capacitors, which can eliminate the defects of conventional high voltage conversion ratio bidirectional DC-DC converters in terms of high-voltage/current stress, less efficiency and low-power limitation. Parallel channels are used to reduce current stress at the low-voltage side and series connected switched capacitors are used to enlarge voltage conversion ratio, reduce voltage stress and achieve auto current sharing. This paper proposes the operation principle, feature analysis and optimization design considerations. On this basis the objectives of high voltage conversion ratio, low voltage/current stress, high power density, high efficiency and high-power applications can be achieved. Some experimental results based on a 500 W prototype converter (24 V to 48 V at low-voltage side, 400 V at high-voltage side are given to verify the theoretical analysis and the effectiveness of the proposed converter.

Model Based Optimization of Integrated Low Voltage DC-DC Converter for Energy Harvesting Applications

Science.gov (United States)

Jayaweera, H. M. P. C.; Muhtaroğlu, Ali

2016-11-01

A novel model based methodology is presented to determine optimal device parameters for the fully integrated ultra low voltage DC-DC converter for energy harvesting applications. The proposed model feasibly contributes to determine the maximum efficient number of charge pump stages to fulfill the voltage requirement of the energy harvester application. The proposed DC-DC converter based power consumption model enables the analytical derivation of the charge pump efficiency when utilized simultaneously with the known LC tank oscillator behavior under resonant conditions, and voltage step up characteristics of the cross-coupled charge pump topology. The verification of the model has been done using a circuit simulator. The optimized system through the established model achieves more than 40% maximum efficiency yielding 0.45 V output with single stage, 0.75 V output with two stages, and 0.9 V with three stages for 2.5 kΩ, 3.5 kΩ and 5 kΩ loads respectively using 0.2 V input.

State trajectories used to observe and control dc-to-dc converters

Science.gov (United States)

Burns, W. W., III; Wilson, T. G.

1976-01-01

State-plane analysis techniques are employed to study the voltage stepup energy-storage dc-to-dc converter. Within this framework, an example converter operating under the influence of a constant on-time and a constant frequency controller is examined. Qualitative insight gained through this approach is used to develop a conceptual free-running control law for the voltage stepup converter which can achieve steady-state operation in one on/off cycle of control. Digital computer simulation data are presented to illustrate and verify the theoretical discussions presented.

Design of an Input-Parallel Output-Parallel LLC Resonant DC-DC Converter System for DC Microgrids

Science.gov (United States)

Juan, Y. L.; Chen, T. R.; Chang, H. M.; Wei, S. E.

2017-11-01

Compared with the centralized power system, the distributed modularized power system is composed of several power modules with lower power capacity to provide a totally enough power capacity for the load demand. Therefore, the current stress of the power components in each module can then be reduced, and the flexibility of system setup is also enhanced. However, the parallel-connected power modules in the conventional system are usually controlled to equally share the power flow which would result in lower efficiency in low loading condition. In this study, a modular power conversion system for DC micro grid is developed with 48 V dc low voltage input and 380 V dc high voltage output. However, in the developed system control strategy, the numbers of power modules enabled to share the power flow is decided according to the output power at lower load demand. Finally, three 350 W power modules are constructed and parallel-connected to setup a modular power conversion system. From the experimental results, compared with the conventional system, the efficiency of the developed power system in the light loading condition is greatly improved. The modularized design of the power system can also decrease the power loss ratio to the system capacity.

Considerations of Physical Design and Implementation for 5 MHz-100 W LLC Resonant DC-DC Converters

Directory of Open Access Journals (Sweden)

Akinori Hariya

2016-01-01

Full Text Available Recently, high power-density, high power-efficiency, and wide regulation range isolated DC-DC converters have been required. This paper presents considerations of physical design and implementation for wide regulation range MHz-level LLC resonant DC-DC converters. The circuit parameters are designed with 3–5 MHz-level switching frequency. Also, the physical parameters and the size of the planar transformer are optimized by using derived equations and finite element method (FEM with Maxwell 3D. Some experiments are done with prototype LLC resonant DC-DC converter using gallium nitride high electron mobility transistors (GaN-HEMTs; the input voltage is 42–53 V, the reference output voltage is 12 V, the load current is 8 A, the maximum switching frequency is about 5 MHz, the total volume of the circuit is 4.1 cm3, and the power density of the prototype converter is 24.4 W/cc.

Design and implementation of current fed DC-DC converter for PHEV application using renewable source

Science.gov (United States)

Milind Metha, Manish; Tutki, Sanjay; Rajan, Aju; Elangovan, D.; Arunkumar, G.

2017-11-01

As the fossil fuels are depleting day by day, the use of renewable energy sources came into existence and they evolved a lot lately. To increase efficiency and productivity in the hybrid vehicles, the existence less efficient petroleum and diesel IC engines need to be replaced with the new and efficient converters with renewable energy sources. This has to be done in such a way that impacts three factors mainly: cost, efficiency and reliability. The PHEVs that have been launched and the upcoming PHEVs using converters with voltage range around 380V to 400V generated with power ranges between 2.4KW to 2.8KW. The basic motto of this paper is to design a prolific converter while considering the factor such as cost and size. In this paper, a two stage DC-DC converter is proposed and the proposed DC-DC converter is utilized to endeavour voltage from 24V (photovoltaic source) to a yield voltage of 400V and to meet the power demand of 250W, since only one panel is being used for this proposed paper. This paper discuss in detail about why and how the current fed DC-DC converter is utilized along with a voltage doubler, thus reducing transformer turns and thereby reducing overall size of the product. Simulation and hardware results have been presented along with calculations for duty cycle required for firing sequence for different values of transformer turns.

Series-Connected High Frequency Converters in a DC Microgrid System for DC Light Rail Transit

Directory of Open Access Journals (Sweden)

Bor-Ren Lin

2018-01-01

Full Text Available This paper studies and presents a series-connected high frequency DC/DC converter connected to a DC microgrid system to provide auxiliary power for lighting, control and communication in a DC light rail vehicle. Three converters with low voltage and current stresses of power devices are series-connected with single transformers to convert a high voltage input to a low voltage output for a DC light rail vehicle. Thus, Metal-Oxide-Semiconductor Field-Effect Transistors (MOSFETs with a low voltage rating and a turn-on resistance are adopted in the proposed circuit topology in order to decrease power losses on power switches and copper losses on transformer windings. A duty cycle control with an asymmetric pulse-width modulation is adopted to control the output voltage at the desired voltage level. It is also adopted to reduce switching losses on MOSFETs due to the resonant behavior from a leakage inductor of an isolated transformer and output capacitor of MOSFETs at the turn-on instant. The feasibility and effectiveness of the proposed circuit have been verified by a laboratory prototype with a 760 V input and a 24 V/60 A output.

Guest Editorial Special Issue on Structured DC Microgrids

DEFF Research Database (Denmark)

Guerrero, Josep M.; Tan, Don F. D.

2017-01-01

With the development of dc coupled devices, such as photovoltaic generations, batteries, supercapacitors, LEDs, computers, and electronics equipment, low-voltage dc distribution networks, structured dc microgrids are emerging as a natural platform to integrate renewable energy sources. However...... in either series/parallel, forming a number of dc busses with different voltage levels. Recently, with the advance of new dc power technologies, several ongoing standards, alliances, and initiatives are bringing the possibility of developing future homes, offices, buildings, campuses, datacenters, ships......, satellites, aircrafts, and other electrical power systems to operate totally or dominantly in dc. Research is being carried out in both the system and component levels of modeling, control, and stability of structured dc microgrids. New high-efficiency topologies and protections are also key nontrivial...

A new soft-switched high step-up DC-DC converter with dual coupled inductors

DEFF Research Database (Denmark)

Forouzesh, Mojtaba; Shen, Yanfeng; Yari, Keyvan

2017-01-01

This paper introduces a new efficient high step-up dc-dc converter with a shared input path and dual series coupled inductors at the output. This converter is suitable for high power applications due to its shared input current that puts low current stresses on the low voltage side switches...

75 FR 80744 - Airworthiness Directives; McDonnell Douglas Corporation Model DC-9-81 (MD-81), DC-9-82 (MD-82...

Science.gov (United States)

2010-12-23

...-1203; Directorate Identifier 2010-NM-168-AD] RIN 2120-AA64 Airworthiness Directives; McDonnell Douglas... amends Sec. 39.13 by adding the following new airworthiness directive (AD): McDonnell Douglas Corporation... Douglas Corporation Model DC-9-81 (MD-81), DC-9-82 (MD-82), DC-9-83 (MD-83), DC-9-87 (MD-87) and MD-88...

Design and implementation of a bidirectional current-controlled voltage-regulated DC-DC switched-mode converter

CSIR Research Space (South Africa)

Coetzer, A

2016-01-01

Full Text Available The design and implementation of a bidirectional current-controlled voltage-regulated DC-DC converter is presented. The converter is required to connect a battery of electrochemical cells (the battery) to an asynchronous motor-drive unit via a...

A high voltage gain quasi Z-source isolated DC/DC converter

DEFF Research Database (Denmark)

Siwakoti, Yam P.; Blaabjerg, Frede; Loh, Poh Chiang

2014-01-01

A compact quasi-Z-source DC/DC converter is presented with high voltage gain, isolated output, and improved efficiency. The improvements in size and performance were achieved by using a square wave inverter with only two output switches driving an isolating transformer in push-pull mode, followed...... by a voltage doubling output rectifier. The converter is well-suited to applications requiring a high voltage gain, especially renewable energy sources such as photovoltaic and fuel-cell power supplies. To demonstrate the converter's performance a prototype designed to output 400 V at 500 W was constructed...

Four Quadrants Integrated Transformers for Dual-input Isolated DC-DC Converters

DEFF Research Database (Denmark)

Ouyang, Ziwei; Zhang, Zhe; Andersen, Michael A. E.

2012-01-01

A common limitation of power coupling effect in some known multiple-input dc-dc converters has been addressed in many literatures. In order to overcome this limitation, a new concept for decoupling the primary windings in the integrated multiple-winding transformers based on 3-dimensional (3D...... perpendicular primary windings, a name of “four quadrants integrated transformers” (FQIT) is therefore given to the proposed construction. Since the two primary windings are uncoupled, the FQIT allows the two input power stages to transfer the energy into the output load simultaneously or at any...

High Current Planar Transformer for Very High Efficiency Isolated Boost DC-DC Converters

DEFF Research Database (Denmark)

Pittini, Riccardo; Zhang, Zhe; Andersen, Michael A. E.

2014-01-01

This paper presents a design and optimization of a high current planar transformer for very high efficiency dc-dc isolated boost converters. The analysis considers different winding arrangements, including very high copper thickness windings. The analysis is focused on the winding ac-resistance a......This paper presents a design and optimization of a high current planar transformer for very high efficiency dc-dc isolated boost converters. The analysis considers different winding arrangements, including very high copper thickness windings. The analysis is focused on the winding ac......-resistance and transformer leakage inductance. Design and optimization procedures are validated based on an experimental prototype of a 6 kW dcdc isolated full bridge boost converter developed on fully planar magnetics. The prototype is rated at 30-80 V 0-80 A on the low voltage side and 700-800 V on the high voltage side...... with a peak efficiency of 97.8% at 80 V 3.5 kW. Results highlights that thick copper windings can provide good performance at low switching frequencies due to the high transformer filling factor. PCB windings can also provide very high efficiency if stacked in parallel utilizing the transformer winding window...

DC Voltage Control and Power-Sharing of Multi-Terminal DC Grids Based on Optimal DC Power Flow and Flexible Voltage Droop Strategy

Directory of Open Access Journals (Sweden)

F. Azma

2015-06-01

Full Text Available This paper develops an effective control framework for DC voltage control and power-sharing of multi-terminal DC (MTDC grids based on an optimal power flow (OPF procedure and the voltage-droop control. In the proposed approach, an OPF algorithm is executed at the secondary level to find optimal reference of DC voltages and active powers of all voltage-regulating converters. Then, the voltage droop characteristics of voltage-regulating converters, at the primary level, are tuned based on the OPF results such that the operating point of the MTDC grid lies on the voltage droop characteristics. Consequently, the optimally-tuned voltage droop controller leads to the optimal operation of the MTDC grid. In case of variation in load or generation of the grid, a new stable operating point is achieved based on the voltage droop characteristics. By execution of a new OPF, the voltage droop characteristics are re-tuned for optimal operation of the MTDC grid after the occurrence of the load or generation variations. The results of simulation on a grid inspired by CIGRE B4 DC grid test system demonstrate efficient grid performance under the proposed control strategy.

Linking DC together with TRSL

DEFF Research Database (Denmark)

Haxthausen, Anne Elisabeth; Yong, X.

2000-01-01

in a method for real-time developments. An operational semantics with behavior is specified for TRSL. It is defined what its means for a TRSL process to satisfy a DC requirement, and a method for verifying whether the satisfaction relation holds or not is provided. Our contribution also demonstrates a general......Duration Calculus (DC) is an interval-based real-time logic, which can be used in capturing and eliciting users' real-time requirements. The Timed RAISE Specification Language (TRSL) is an extension of the RAISE Specification Language with real-time features. This paper links DC and TRSL together...

All Digital Switch-Mode DC/DC Converters with BIST Functionality for Harsh Space Environments, Phase I

Data.gov (United States)

National Aeronautics and Space Administration — The Space Micro Arizona State University (ASU) team will develop an all-digitally controlled, wide temperature range point-of-load switch-mode DC-DC regulator core...

Open-circuit fault detection and tolerant operation for a parallel-connected SAB DC-DC converter

DEFF Research Database (Denmark)

Park, Kiwoo; Chen, Zhe

2014-01-01

This paper presents an open-circuit fault detection method and its tolerant control strategy for a Parallel-Connected Single Active Bridge (PCSAB) dc-dc converter. The structural and operational characteristics of the PCSAB converter lead to several advantages especially for high power applicatio...

Hierarchical Power Sharing Control in DC Microgrids

DEFF Research Database (Denmark)

Peyghami, Saeed; Mokhtari, Hossein; Blaabjerg, Frede

2016-01-01

Because of the advances in power electronics, DC-based power systems, have been used in industrial applications such as data centers [18], space applications [10], aircraft [12], offshore wind farms, electric vehicles [56], DC home systems [5, 20], and high-voltage DC transmission systems...

75 FR 38017 - Airworthiness Directives; McDonnell Douglas Corporation Model DC-9-10 Series Airplanes, DC-9-30...

Science.gov (United States)

2010-07-01

... Airworthiness Directives; McDonnell Douglas Corporation Model DC- 9-10 Series Airplanes, DC-9-30 Series... previously to all known U.S. owners and operators of the McDonnell Douglas Corporation airplanes identified... INFORMATION: On July 15, 2009, we issued AD 2009-15-16, which applies to all McDonnell Douglas Model DC-9-10...

Experimental study of dynamic behaviors and routes to chaos in DC-DC boost converters

International Nuclear Information System (INIS)

Cafagna, D.; Grassi, G.

2005-01-01

This paper illustrates an experimental study of a current-programmed DC-DC boost converter, with the aim of investigating possible pathways through which the converter may enter chaos. In particular, based on experimental measurements, it is shown that variations of input voltage and reference current can generate periodic, subharmonic, quasi-periodic and chaotic behaviors

Halbach array DC motor/generator

Science.gov (United States)

Merritt, B.T.; Dreifuerst, G.R.; Post, R.F.

1998-01-06

A new configuration of DC motor/generator is based on a Halbach array of permanent magnets. This motor does not use ferrous materials so that the only losses are winding losses and losses due to bearings and windage. An ``inside-out`` design is used as compared to a conventional motor/generator design. The rotating portion, i.e., the rotor, is on the outside of the machine. The stationary portion, i.e., the stator, is formed by the inside of the machine. The rotor contains an array of permanent magnets that provide a uniform field. The windings of the motor are placed in or on the stator. The stator windings are then ``switched`` or ``commutated`` to provide a DC motor/generator much the same as in a conventional DC motor. The commutation can be performed by mechanical means using brushes or by electronic means using switching circuits. The invention is useful in electric vehicles and adjustable speed DC drives. 17 figs.

Halbach array DC motor/generator

Science.gov (United States)

Merritt, Bernard T.; Dreifuerst, Gary R.; Post, Richard F.

1998-01-01

A new configuration of DC motor/generator is based on a Halbach array of permanent magnets. This motor does not use ferrous materials so that the only losses are winding losses and losses due to bearings and windage. An "inside-out" design is used as compared to a conventional motor/generator design. The rotating portion, i.e., the rotor, is on the outside of the machine. The stationary portion, i.e., the stator, is formed by the inside of the machine. The rotor contains an array of permanent magnets that provide a uniform field. The windings of the motor are placed in or on the stator. The stator windings are then "switched" or "commutated" to provide a DC motor/generator much the same as in a conventional DC motor. The commutation can be performed by mechanical means using brushes or by electronic means using switching circuits. The invention is useful in electric vehicles and adjustable speed DC drives.

Bifurcation Analysis of a DC-DC Bidirectional Power Converter Operating with Constant Power Loads

Science.gov (United States)

Cristiano, Rony; Pagano, Daniel J.; Benadero, Luis; Ponce, Enrique

Direct current (DC) microgrids (MGs) are an emergent option to satisfy new demands for power quality and integration of renewable resources in electrical distribution systems. This work addresses the large-signal stability analysis of a DC-DC bidirectional converter (DBC) connected to a storage device in an islanding MG. This converter is responsible for controlling the balance of power (load demand and generation) under constant power loads (CPLs). In order to control the DC bus voltage through a DBC, we propose a robust sliding mode control (SMC) based on a washout filter. Dynamical systems techniques are exploited to assess the quality of this switching control strategy. In this sense, a bifurcation analysis is performed to study the nonlinear stability of a reduced model of this system. The appearance of different bifurcations when load parameters and control gains are changed is studied in detail. In the specific case of Teixeira Singularity (TS) bifurcation, some experimental results are provided, confirming the mathematical predictions. Both a deeper insight in the dynamic behavior of the controlled system and valuable design criteria are obtained.

Feasibility analysis of the application and positioning of DC HTS FCL in a DC microgrid through modeling and simulation using Simulink and SimPowerSystem

Energy Technology Data Exchange (ETDEWEB)

Khan, U.A.; Shin, W.J.; Seong, J.K.; Oh, S.H.; Lee, S.H. [School of Electrical Engineering and Computer Science, Hanyang University, Ansan-Shi, Gyeonggi-do 426-791 (Korea, Republic of); Lee, B.W., E-mail: bangwook@hanyang.ac.kr [School of Electrical Engineering and Computer Science, Hanyang University, Ansan-Shi, Gyeonggi-do 426-791 (Korea, Republic of)

2011-11-15

We modeled DC SFCL by use of SimPowerSystem blocks. We examine the DC fault current limitation in low voltage DC distribution networks. SFCL's affects at critical points were measured. SFCL installed at the substation rectifier branch resulted in abnormal increase of fault current. The strategic location of SFCL is the point of integration of the PV plant with the power grid. DC fault current limitation in DC distribution network is one of the critical issues which need to be taken care of before they can be practically implemented. High temperature superconductors could be efficiently installed to cope with the problem of DC fault currents. In this paper, a generalized DC high temperature superconducting fault current limiter (SFCL) is modeled by integrating Simulink and SimPowerSystem blocks. This model is designed for limiting DC fault currents in low voltage DC distribution networks. A DC microgrid having a low voltage DC distribution network, an integrated photovoltaic plant and domestic customer load is modeled. Transient analysis of the DC microgrid is performed by generating fault and measuring DC fault currents at critical points. The designed DC SFCL is placed at different strategic locations in DC microgrid and fault current limitation performance of DC SFCL in DC microgrid has been analyzed. Moreover, the affects of rapid impedance changing in the distribution network due to the fault followed by DC SFCL activation is investigated. Finally, the best suitable position and affects of DC SFCL in a DC microgrid along with suggestions for implementation have been proposed.

Feasibility analysis of the application and positioning of DC HTS FCL in a DC microgrid through modeling and simulation using Simulink and SimPowerSystem

International Nuclear Information System (INIS)

Khan, U.A.; Shin, W.J.; Seong, J.K.; Oh, S.H.; Lee, S.H.; Lee, B.W.

2011-01-01

We modeled DC SFCL by use of SimPowerSystem blocks. We examine the DC fault current limitation in low voltage DC distribution networks. SFCL's affects at critical points were measured. SFCL installed at the substation rectifier branch resulted in abnormal increase of fault current. The strategic location of SFCL is the point of integration of the PV plant with the power grid. DC fault current limitation in DC distribution network is one of the critical issues which need to be taken care of before they can be practically implemented. High temperature superconductors could be efficiently installed to cope with the problem of DC fault currents. In this paper, a generalized DC high temperature superconducting fault current limiter (SFCL) is modeled by integrating Simulink and SimPowerSystem blocks. This model is designed for limiting DC fault currents in low voltage DC distribution networks. A DC microgrid having a low voltage DC distribution network, an integrated photovoltaic plant and domestic customer load is modeled. Transient analysis of the DC microgrid is performed by generating fault and measuring DC fault currents at critical points. The designed DC SFCL is placed at different strategic locations in DC microgrid and fault current limitation performance of DC SFCL in DC microgrid has been analyzed. Moreover, the affects of rapid impedance changing in the distribution network due to the fault followed by DC SFCL activation is investigated. Finally, the best suitable position and affects of DC SFCL in a DC microgrid along with suggestions for implementation have been proposed.

A DC-DC Converter with Wide Input Voltage Range for Fuel Cell and Supercapacitor Application

DEFF Research Database (Denmark)

Zhang, Zhe; Thomsen, Ole Cornelius; Andersen, Michael Andreas E.

2009-01-01

This paper proposes a novel phase-shift plus duty cycle controlled hybrid bi-directional DC-DC converter based on fuel cells and supercapacitors. The described converter employs two high frequency transformers to couple the half-bridge and full-bridge circuits together in the primary side...

Step-Up Partial Power DC-DC Converters for Two-Stage PV Systems with Interleaved Current Performance

Directory of Open Access Journals (Sweden)

Jaime Wladimir Zapata

2018-02-01

Full Text Available This work presents a partial power converter allowing us to obtain, with a single DC-DC converter, the same feature as the classical interleaved operation of two converters. More precisely, the proposed topology performs similarly as the input-parallel output-series (IPOS configuration reducing the current ripple at the input of the system and dividing the individual converters power rating, compared to a single converter. The proposed topology consists of a partial DC-DC converter processing only a fraction of the total power, thus allowing high efficiency. Experimental results are provided to validate the proposed converter topology with a Flyback-based 100 W test bench with a transformer turns ratio n 1 = n 2 . Experimental results show high performances reducing the input current ripple around 30 % , further increasing the conversion efficiency.

DC8 and DC13 var genes associated with severe malaria bind avidly to diverse endothelial cells.

Directory of Open Access Journals (Sweden)

Marion Avril

Full Text Available During blood stage infection, Plasmodium falciparum infected erythrocytes (IE bind to host blood vessels. This virulence determinant enables parasites to evade spleen-dependent killing mechanisms, but paradoxically in some cases may reduce parasite fitness by killing the host. Adhesion of infected erythrocytes is mediated by P. falciparum erythrocyte membrane protein 1 (PfEMP1, a family of polymorphic adhesion proteins encoded by var genes. Whereas cerebral binding and severe malaria are associated with parasites expressing DC8 and DC13 var genes, relatively little is known about the non-brain endothelial selection on severe malaria adhesive types. In this study, we selected P. falciparum-IEs on diverse endothelial cell types and demonstrate that DC8 and DC13 var genes were consistently among the major var transcripts selected on non-brain endothelial cells (lung, heart, bone marrow. To investigate the molecular basis for this avid endothelial binding activity, recombinant proteins were expressed from the predominant upregulated DC8 transcript, IT4var19. In-depth binding comparisons revealed that multiple extracellular domains from this protein bound brain and non-brain endothelial cells, and individual domains largely did not discriminate between different endothelial cell types. Additionally, we found that recombinant DC8 and DC13 CIDR1 domains exhibited a widespread endothelial binding activity and could compete for DC8-IE binding to brain endothelial cells, suggesting they may bind the same host receptor. Our findings provide new insights into the interaction of severe malaria adhesive types and host blood vessels and support the hypothesis that parasites causing severe malaria express PfEMP1 variants with a superior ability to adhere to diverse endothelial cell types, and may therefore endow these parasites with a growth and transmission advantage.

Performance analysis of pulse analog control schemes for LLC resonant DC/DC converters suitable in portable applications

Directory of Open Access Journals (Sweden)

P. Kowstubha

2016-12-01

Full Text Available Performance Analysis of Pulse Analog Control Schemes, predominantly Pulse-Width Modulation (PWM and Pulse-Position Modulation (PPM for LLC resonant DC/DC converter suitable in portable applications is addressed in this paper. The analysis is done for closed loop performance, frequency domain performance, primary and secondary side conduction losses and soft commutation using PSIM 6.0 software and observed that PPM scheme provides better performance at high input voltage with a good selectivity of frequency over a wide range of line and load variations. The performance of LLC resonant DC/DC converter is demonstrated using PPM scheme for a design specifications of 12 V, 5 A output.

State-plane analysis of zero-voltage-switching resonant dc/dc power converters

Science.gov (United States)

Kazimierczuk, Marian K.; Morse, William D.

The state-plane analysis technique for the zero-voltage-switching resonant dc/dc power converter family of topologies, namely the buck, boost, buck-boost, and Cuk converters is established. The state plane provides a compression of information that allows the designer to uniquely examine the nonlinear dynamics of resonant converter operation. Utilizing the state plane, resonant converter modes of operation are examined and the switching frequencies are derived for the boundaries between these modes, including the boundary of energy conversion.

Cost-based droop scheme for DC microgrid

DEFF Research Database (Denmark)

Nutkani, Inam Ullah; Wang, Peng; Loh, Poh Chiang

2014-01-01

voltage level, less on optimized operation and control of generation sources. The latter theme is perused in this paper, where cost-based droop scheme is proposed for distributed generators (DGs) in DC microgrids. Unlike traditional proportional power sharing based droop scheme, the proposed scheme......-connected operation. Most importantly, the proposed scheme can reduce overall total generation cost in DC microgrids without centralized controller and communication links. The performance of the proposed scheme has been verified under different load conditions.......DC microgrids are gaining interest due to higher efficiencies of DC distribution compared with AC. The benefits of DC systems have been widely researched for data centers, IT facilities and residential applications. The research focus, however, has been more on system architecture and optimal...

Novel Step-Up DC/DC Converter with No Right Half Plane Zero and Reduced Switched Voltage Stress Characteristics

DEFF Research Database (Denmark)

Mostaan, Ali; Alizadeh, Ebrahim; Soltani, Mohsen

2014-01-01

and the voltage transfer gain is obtained. It is also demonstrated that the voltage stress on all semiconductor devices is restricted to input voltage which allows the utilization of a power switch with lower drain source resistance. In order to further increase the voltage gain another switched capacitor voltage......Novel step-up DC/DC converter is introduced in this paper. This converter is realized with adding the switched capacitor voltage multiplier cell to the three switch step-down DC/DC converter that has been proposed in the literature. The proposed converter is analyzed in the steady state...

Circuit description of unipolar DC-to-DC converters for APS storage ring quadrupoles and sextupoles

International Nuclear Information System (INIS)

McGhee, D.G.

1993-01-01

This paper describes the control, interlock, and power circuits for 680 unipolar switch mode DC-to-DC converters used to regulate the Advanced Photon Sources (APS's) storage ring quadrupole and sextupole magnet currents. Quadrupole current stability is ± 6x10 -5 and the sextupole current stability is ±3x10 -4 . The stability is obtained with pulse width modulation, operating at a switching frequency of 20kHz with full current switching. The converters are housed in 200 cabinets located on top of the storage ring tunnel. Raw DC power is distributed from 80 AC-to-DC power supplies, four at each of 20 locations around the storage ring. Voltages, currents, and temperatures are computer monitored and logged for the converters and magnets. All converters and magnets are water cooled with the flow and pressure monitored at the inlet and outlet of groups. Water is interlocked with the raw power supplies and not the individual converters

Chaos control in solar fed DC-DC boost converter by optimal parameters using nelder-mead algorithm powered enhanced BFOA

Science.gov (United States)

Sudhakar, N.; Rajasekar, N.; Akhil, Saya; Jyotheeswara Reddy, K.

2017-11-01

The boost converter is the most desirable DC-DC power converter for renewable energy applications for its favorable continuous input current characteristics. In other hand, these DC-DC converters known as practical nonlinear systems are prone to several types of nonlinear phenomena including bifurcation, quasiperiodicity, intermittency and chaos. These undesirable effects has to be controlled for maintaining normal periodic operation of the converter and to ensure the stability. This paper presents an effective solution to control the chaos in solar fed DC-DC boost converter since the converter experiences wide range of input power variation which leads to chaotic phenomena. Controlling of chaos is significantly achieved using optimal circuit parameters obtained through Nelder-Mead Enhanced Bacterial Foraging Optimization Algorithm. The optimization renders the suitable parameters in minimum computational time. The results are compared with the traditional methods. The obtained results of the proposed system ensures the operation of the converter within the controllable region.

Small-Signal Analysis of Single-Phase and Three-phase DC/AC and AC/DC PWM Converters with the Frequency-Shift Technique

DEFF Research Database (Denmark)

Blaabjerg, Frede; Aquila, A. Dell’; Liserre, Marco

2004-01-01

of dc/dc converters via a 50 Hz frequency-shift. The input admittance is calculated and measured for two study examples (a three-phase active rectifier and a single-phase photovoltaic inverter). These examples show that the purpose of a well designed controller for grid-connected converters......A systematic approach to study dc/ac and ac/dc converters without the use of synchronous transformation is proposed. The use of a frequency-shift technique allows a straightforward analysis of single-phase and three-phase systems. The study of dc/ac and of ac/dc converters is reported to the study...... is to minimize the input admittance in order to make the grid converter more robust to grid disturbance....

Design and Control of a Multiple Input DC/DC Converter for Battery/Ultra-capacitor Based Electric Vehicle Power System

DEFF Research Database (Denmark)

Schaltz, Erik; Li, Zhihao; Onar, Omer

2009-01-01

Battery/Ultra-capacitor based electrical vehicles (EV) combine two energy sources with different voltage levels and current characteristics. This paper focuses on design and control of a multiple input DC/DC converter, to regulate output voltage from different inputs. The proposed multi-input con......Battery/Ultra-capacitor based electrical vehicles (EV) combine two energy sources with different voltage levels and current characteristics. This paper focuses on design and control of a multiple input DC/DC converter, to regulate output voltage from different inputs. The proposed multi...

Design and Implementation of Battery Charger with Power Factor Correction Using Sepic Converter and Full-bridge DC-DC Converter

OpenAIRE

Efendi, Moh. Zaenal; Windarko, Novie Ayub; Amir, Moh. Faisal

2013-01-01

This paper presents a design and implementation of a converter which has a high power factor for battery charger application. The converter is a combination of a SEPIC converter and a full-bridge DC-DC converter connected in two stages of series circuit. The SEPIC converter works in discontinuous conduction mode and it serves as a power factor corrector so that the shape of input current waveform follows the shape of input voltage waveform. The full-bridge DC-DC converter serves as a regulato...

Periodically Swapping Modulation (PSM) Strategy for Three-Level (TL) DC/DC Converter with Balanced Switch Currents

DEFF Research Database (Denmark)

Liu, Dong; Deng, Fujin; Zhang, Qi

2018-01-01

The asymmetrical modulation strategy is widely used in various types of three-level (TL) DC/DC converters, while the current imbalance among the power switches is one of the important issues. In this paper, a novel periodically swapping modulation (PSM) strategy is proposed for balancing the power...... switches’ currents in various types of TL DC/DC converters. In the proposed PSM strategy, the driving signals of the switch pairs are swapped periodically, which guarantees that the currents through the power switches are kept balanced in every two switching periods. Therefore, the proposed PSM...... strategy can effectively improve the reliability of the converter by balancing the power losses and thermal stresses among the power switches. The operation principle and performances of the proposed PSM strategy are analyzed in detail. Finally, the simulation and experimental results are presented...

Distributed maximum power point tracking in photovoltaic applications: active bypass DC/DC converter

Directory of Open Access Journals (Sweden)

Carlos Andrés Ramos-Paja

2012-01-01

Full Text Available Se propone una estructura de desvío activo para maximizar la producción de potencia en sistemas fotovoltaicos bajo condiciones irregulares de operación, comparando su eficiencia con soluciones individuales y distribuidas basadas en convertidores DC/DC convencionales. Los análisis y simulaciones realistas demuestran las ventajas del nuevo convertidor de desvío activo sobre soluciones basadas en convertidores Boost, Buck y Buck-Boost.

Efecto del aceite esencial de Cymbopogon citratus sobre propiedades fisicoquímicas en películas de quitosano

Directory of Open Access Journals (Sweden)

María del Carmen Vázquez - Briones

2017-01-01

Full Text Available Se investigó el efecto de la incorporación de aceite esencial de zacate limón ( Cymbopogon citratus , en concentraciones de 0, 200 y 400 ppm, en las propiedades fisicoquímicas (espesor, humedad, solubilidad, permeabilidad al vapor de agua, color, transparencia y mecánicas (resistencia a la tensión y elongación de películas de quitosano a dos concentraciones (1 y 3%. Los resultados mostraron un efecto significativo (p ≤ 0,05 en los valores del espesor de las películas a las dos concentraciones de quitosano. Se observó un efecto significativo (p ≤ 0,05 en los valores de humedad a concentraciones de 0, 200 y 400 ppm de aceite esencial. La adición de aceite esencial en películas de quitosano mostró un efecto significativo (p ≤ 0,05 en los valores de permeabili dad al vapor de agua. La concentración de quitosano mostró un efecto significativo (p ≤ 0,05 en transparencia y en los parámetros de color L* , a* , b* . Al variar la concentración de quitosano se observó un incremento significativo (p ≤ 0,05 en los valores de resistencia a la tensión de las películas de quitosano.

Modelling, Simulation and Construction of a DC/DC Boost Power Converter: A School Experimental System

Science.gov (United States)

Silva-Ortigoza, R.; Silva-Ortigoza, G.; Hernandez-Guzman, V. M.; Saldana-Gonzalez, G.; Marcelino-Aranda, M.; Marciano-Melchor, M.

2012-01-01

We introduce a dc/dc boost power converter as a didactic prototype intended to support courses on electric circuit analysis experimentally. The corresponding mathematical model is obtained, the converter is designed and an experimental setup is described, constructed and tested. Simplicity of construction as well as low cost of components renders…

A review on DC/DC converter architectures for power fuel cell applications

International Nuclear Information System (INIS)

Kolli, Abdelfatah; Gaillard, Arnaud; De Bernardinis, Alexandre; Bethoux, Olivier; Hissel, Daniel; Khatir, Zoubir

2015-01-01

Highlights: • Different DC/DC power converter topologies for Fuel Cell systems are presented. • Advantages and drawbacks of the DC/DC power converter topologies are detailed. • Wide-BandGap semiconductors are attractive candidates for design of converters. • Wide-BandGap semiconductors improve efficiency and thermal limits of converters. • Different semiconductor technologies are assessed. - Abstract: Fuel cell-based power sources are attractive devices. Through multi-stack architecture, they offer flexibility, reliability, and efficiency. Keys to accessing the market are simplifying its architecture and each components. These include, among others, the power converter enabling the output voltage regulation. This article focuses on this specific component. The present paper gives a comprehensive overview of the power converter interfaces potentially favorable for the automotive, railways, aircrafts and small stationary domains. First, with respect to the strategic development of a modular design, it defines the specifications of a basic interface. Second, it inventories the best architecture opportunities with respect to these requirements. Based on this study, it fully designs a basic module and points out the outstanding contribution of the new developed silicon carbide switch technology. In conclusion, this review article exhibits the importance of choosing the right power converter architecture and the related technology. In this context it is highlighted that the output power interface can be efficient, compact and modular. In addition, its features enable a thermal compatibility with many ways of integrating this component in the global fuel cell based power source.

Antimicrobial constituents and synergism effect of the essential oils from Cymbopogon citratus and Alpinia galanga.

Science.gov (United States)

Tadtong, Sarin; Watthanachaiyingcharoen, Rith; Kamkaen, Narisa

2014-02-01

From the fresh leaf sheathes of lemongrass (Cymbopogon citratus) and rhizomes of galanga (Alpinia galanga) light yellow and colorless oils, respectively, were obtained by hydrodistillation and microwave assisted extraction (MAE) in yields of 0.24% and 0.03%, and 0.11% and trace (w/w), respectively. By GC/MS analysis, five major constituents were identified in lemongrass oil, E-citral, Z-citral, beta-myrcene, selina-6-en-4-ol, and cis-ocimene, and five in galanga oil, 1,8-cineole, phenol 4-(2-propenyl)-acetate, dl-limonene, alpha-pinene, and a-terpineol. Three major components of the combined lemongrass and galanga oils (ratio 7:3, 1:1, 3:7) were 1,8-cineole (46.3%, 31.5%, 19.3%), E-citral (12.8%, 22.7%, 32.8%) and Z-citral (8.5%, 15.2%, 21.6%). The MICs of lemongrass and galanga oils were: against Staphylococcus aureus 0.5% and 4%, v/v, against Pseudomonas aeruginosa 40% and >40%,v/v, against Streptococcus bovis 0.25% and 0.5%, v/v, and against Candida albicans 0.25% and 0.5%, v/v. Citral (from lemongrass oil) gave greater potentiation than 1,8-cineole (from galanga oil). The combination profiles of galanga oil with lemongrass oil (volume ratios 3:7, 1:1, and 7:3) were tested against the four pathogenic microorganisms. Synergistic activity was best noted for only one ratio (volume ratio 3:7) as the sigmafic< 1 against all tested microorganisms. The present investigation provides evidenc that the utilization of two essential oils in combination should be assessed for synergistic antimicrobial activity in order to reduce their minimum effective dose.

A single-phase embedded Z-source DC-AC inverter.

Science.gov (United States)

Kim, Se-Jin; Lim, Young-Cheol

2014-01-01

In the conventional DC-AC inverter consisting of two DC-DC converters with unipolar output capacitors, the output capacitor voltages of the DC-DC converters must be higher than the DC input voltage. To overcome this weakness, this paper proposes a single-phase DC-AC inverter consisting of two embedded Z-source converters with bipolar output capacitors. The proposed inverter is composed of two embedded Z-source converters with a common DC source and output AC load. Though the output capacitor voltages of the converters are relatively low compared to those of a conventional inverter, an equivalent level of AC output voltages can be obtained. Moreover, by controlling the output capacitor voltages asymmetrically, the AC output voltage of the proposed inverter can be higher than the DC input voltage. To verify the validity of the proposed inverter, experiments were performed with a DC source voltage of 38 V. By controlling the output capacitor voltages of the converters symmetrically or asymmetrically, the proposed inverter can produce sinusoidal AC output voltages. The experiments show that efficiencies of up to 95% and 97% can be achieved with the proposed inverter using symmetric and asymmetric control, respectively.

Chemical control of wild sorghum (sorghum arundinaceum Del. Stapf. in faba bean (vicia faba L.) in the Northern State of Sudan

International Nuclear Information System (INIS)

Bedry, K. A. M.; Elamin, A. E. M.

2011-01-01

An experiment was conducted at Merowe Research Station farm, in the Northern State, Sudan, during 2008/2009 and 2009/2010 seasons. The objectives of the experiment were to determine the damage inflicted by a wild sorghum species (Sorghum arundinaceum (Del.) Stapf. ) on the yield of faba bean (Vicia faba L.) and to evaluate the efficacy of the post-emergence herbicide clodinafop-propargyl (Topik) on wild sorghum and its effect on faba bean yield. The wild sorghum reduced faba bean crop stand and straw and seed yields by 53% - 76%, 76% - 79% and 88% - 91%, respectively, compared with the hand-weeded control. Faba bean was tolerant to the herbicide. The herbicide, at all rates, effected complete (100%) and persistent control of the wild sorghum and resulted in faba bean seed yield comparable to the hand-weeded control. The lowest dose (0.075 kg a.i/ha) of the herbicide used was equal to 75% of the dose recommended for the control of wild sorghum in wheat. It is concluded that clodinafop-propargyl at 0.075 kg a.e/ha could be used in controlling wild sorghum in faba bean. At this rate, the marginal rate of return was about 35 which indicating that every monetary unit (SDG 1) invested in the mentioned treatment would be returned back, plus additional amount of 35 SDG.(Author)

Power Quality in DC Power Distribution Systems and Microgrids

Directory of Open Access Journals (Sweden)

Stephen Whaite

2015-05-01

Full Text Available This review paper discusses power quality considerations for direct current (DC electric power distribution systems, particularly DC microgrids. First, four selected sample DC architectures are discussed to provide motivation for the consideration of power quality in DC systems. Second, a brief overview of power quality challenges in conventional alternating current (AC distribution systems is given to establish the field of power quality. Finally, a survey of literature addressing power quality issues in DC systems is presented, and necessary power quality considerations in DC distribution system design and operation are discussed.

Family of Step-up DC/DC Converters with Fast Dynamic Response for Low Power Applications

DEFF Research Database (Denmark)

N. Soltani, Mohsen; Mostaan, Ali; Siwakoti, Yam Prasad

2016-01-01

This study presents a family of novel step-up DC/DC converters which do not have a right half plane zero in their transfer function resulting in faster dynamic behaviour of the converters under the load variation. In addition, the voltage stress on all the active switches and diodes is as low...

Ultra-Step-Up DC-DC Converter with Integrated Autotransformer and Coupled Inductor

DEFF Research Database (Denmark)

Siwakoti, Yam Prasad; Blaabjerg, Frede; Loh, Poh Chiang

2016-01-01

This paper introduces a new single-switch nonisolated dc-dc converter with very high voltage transfer ratio and reduced semiconductor voltage stress. The converter utilizes an integrated autotransformer and a coupled inductor on the same core to achieve a high step-up voltage gain without extreme...... duty cycle. Further, an integrated passive regenerative circuit recycles the leakage energy of the coupled magnetics and transfer the leakage energy to the load, which helps to avoid high voltage spikes across the switch. This feature along with low stress on the switching device enables the designer...

Simultaneous distribution of AC and DC power

Science.gov (United States)

Polese, Luigi Gentile

2015-09-15

A system and method for the transport and distribution of both AC (alternating current) power and DC (direct current) power over wiring infrastructure normally used for distributing AC power only, for example, residential and/or commercial buildings' electrical wires is disclosed and taught. The system and method permits the combining of AC and DC power sources and the simultaneous distribution of the resulting power over the same wiring. At the utilization site a complementary device permits the separation of the DC power from the AC power and their reconstruction, for use in conventional AC-only and DC-only devices.

A New Control Method for a Bi-Directional Phase-Shift-Controlled DC-DC Converter with an Extended Load Range

Directory of Open Access Journals (Sweden)

Wenzheng Xu

2017-10-01

Full Text Available Phase-shifted converters are practically important to provide high conversion efficiencies through soft-switching techniques. However, the limitation on a resonant inductor current in the converters often leads to a non-fulfillment of the requirement of minimum load current. This paper presents a new power electronics control technique to enable the dual features of bi-directional power flow and an extended load range for soft-switching in phase-shift-controlled DC-DC converters. The proposed technique utilizes two identical full bridge converters and inverters in conjunction with a new control logic for gate-driving signals to facilitate both Zero Current Switching (ZCS and Zero Voltage Switching (ZVS in a single phase-shift-controlled DC-DC converter. The additional ZCS is designed for light load conditions at which the minimum load current cannot be attained. The bi-directional phase-shift-controlled DC-DC converter can implement the function of synchronous rectification. Its fast dynamic response allows for quick energy recovery during the regenerative braking of traction systems in electrified trains.

Multi-cell DC-DC converters : modelling, analysis and control

International Nuclear Information System (INIS)

Feki, M.; El Aroudi, A.; Robert, B.G.M.

2011-01-01

This paper is devoted to modeling of a two-cell DC/DC buck converter, to the analysis of its behavior and to the design of control methods that yield to improve its performances. Various numerical simulations and dynamical aspects of this system are illustrated in the time domain and in the parameter space. Without control, the system may present many undesirable behaviors such as sub-harmonics and chaotic oscillations. The proposed controllers are able to widen the stability range of the system. Optimum values of parameters giving rise to fast response while maintaining stable periodic behavior are given in closed form. However, it is detected that in a certain region of the parameter space, the stabilized periodic orbit may coexist with a chaotic attractor. Boundary between basins of attraction are obtained by means of numerical simulations.

Input-Parallel Output-Parallel Three-Level DC/DC Converters With Interleaving Control Strategy for Minimizing and Balancing Capacitor Ripple Currents

DEFF Research Database (Denmark)

Liu, Dong; Deng, Fujin; Gong, Zheng

2017-01-01

In this paper, the input-parallel output-parallel (IPOP) three-level (TL) DC/DC converters associated with the interleaving control strategy are proposed for minimizing and balancing the capacitor ripple currents. The proposed converters consist of two four-switch half-bridge three-level (HBTL) DC...

BaltDC: purification, characterization and infrared spectroscopy of an antiplatelet DC protein isolated from Bothrops alternatus snake venom.

Science.gov (United States)

Matias, Mariana Santos; de Sousa, Bruna Barbosa; da Cunha Pereira, Déborah Fernanda; Dias, Edigar Henrique Vaz; Mamede, Carla Cristine Neves; de Queiroz, Mayara Ribeiro; Silva, Anielle Christine Almeida; Dantas, Noelio Oliveira; Soares, Andreimar Martins; de Oliveira Costa, Júnia; de Oliveira, Fábio

2017-01-01

Snake venoms are a complex mixture of proteins, organic and inorganic compounds. Some of these proteins, enzymatic or non-enzymatic ones, are able to interact with platelet receptors, causing hemostatic disorders. The possible therapeutic potential of toxins with antiplatelet properties may arouse interest in the pharmacological areas. The present study aimed to purify and characterize an antiplatelet DC protein from Bothrops alternatus snake venom. The protein, called BaltDC (DC protein from B. alternatus snake venom), was purified by a combination of ion-exchange chromatography on DEAE-Sephacel column and gel filtration on Sephadex G-75. The molecular mass was estimated by polyacrylamide gel electrophoresis in the presence of sodium dodecyl sulfate (SDS-PAGE). The amino acid sequence of the N-terminal region was carried out by Edman degradation method. Platelet aggregation assays were performed in human platelet-rich plasma (PRP). Infrared (IR) spectroscopy was used in order to elucidate the interactions between BaltDC and platelet membrane. BaltDC ran as a single protein band on SDS-PAGE and showed apparent molecular mass of 32 kDa under reducing or non-reducing conditions. The N-terminal region of the purified protein revealed the amino acid sequence IISPPVCGNELLEVGEECDCGTPENCQNECCDA, which showed identity with other snake venom metalloproteinases (SVMPs). BaltDC was devoid of proteolytic, hemorrhagic, defibrinating or coagulant activities, but it showed a specific inhibitory effect on platelet aggregation induced by ristocetin and epinephrine in PRP. IR analysis spectra strongly suggests that PO 3 2- groups, present in BaltDC, form hydrogen bonds with the PO 2 - groups present in the non-lipid portion of the membrane platelets. BaltDC may be of medical interest since it was able to inhibit platelet aggregation.

Simulation analysis of cascade controller for DC-DC bank converter

International Nuclear Information System (INIS)

Mahar, M.A.; Abro, M.R.; Larik, A.S.

2009-01-01

Power electronic converters are periodic variable structure systems due to their switched operation. During the last few decades several new dc-dc converter topologies have emerged. Buck converter being simple in topology, has recently drawn attraction of many researchers. Basically, a buck converter is highly underdamped system. In order to overcome the developed oscillations in output of this converter, various control techniques have been proposed. However, these techniques are fraught with many drawbacks. This paper focus on a cascade controller based buck topology. Steady state analysis is given in this paper which shows output voltage and inductor current in detail. Dynamic analysis for line and load variation is also presented. The buck topology is implemented and simulated in MATLAB/Simulink. The simulated results are presented. (author)

Bidirectional dc-to-dc Power Converter

Science.gov (United States)

Griesbach, C. R.

1986-01-01

Solid-state, series-resonant converter uses high-voltage thyristors. Converter used either to convert high-voltage, low-current dc power to lowvoltage, high current power or reverse. Taking advantage of newly-available high-voltage thyristors to provide better reliability and efficiency than traditional converters that use vacuum tubes as power switches. New converter essentially maintenance free and provides greatly increased mean time between failures. Attractive in industrial applications whether or not bidirectional capability is required.

Pulsed dc self-sustained magnetron sputtering

International Nuclear Information System (INIS)

Wiatrowski, A.; Posadowski, W. M.; Radzimski, Z. J.

2008-01-01

The magnetron sputtering has become one of the commonly used techniques for industrial deposition of thin films and coatings due to its simplicity and reliability. At standard magnetron sputtering conditions (argon pressure of ∼0.5 Pa) inert gas particles (necessary to sustain discharge) are often entrapped in the deposited films. Inert gas contamination can be eliminated during the self-sustained magnetron sputtering (SSS) process, where the presence of the inert gas is not a necessary requirement. Moreover the SSS process that is possible due to the high degree of ionization of the sputtered material also gives a unique condition during the transport of sputtered particles to the substrate. So far it has been shown that the self-sustained mode of magnetron operation can be obtained using dc powering (dc-SSS) only. The main disadvantage of the dc-SSS process is its instability related to random arc formation. In such case the discharge has to be temporarily extinguished to prevent damaging both the magnetron source and power supply. The authors postulate that pulsed powering could protect the SSS process against arcs, similarly to reactive pulsed magnetron deposition processes of insulating thin films. To put this concept into practice, (i) the high enough plasma density has to be achieved and (ii) the type of pulsed powering has to be chosen taking plasma dynamics into account. In this article results of pulsed dc self-sustained magnetron sputtering (pulsed dc-SSS) are presented. The planar magnetron equipped with a 50 mm diameter and 6 mm thick copper target was used during the experiments. The maximum target power was about 11 kW, which corresponded to the target power density of ∼560 W/cm 2 . The magnetron operation was investigated as a function of pulse frequency (20-100 kHz) and pulse duty factor (50%-90%). The discharge (argon) extinction pressure level was determined for these conditions. The plasma emission spectra (400-410 nm range) and deposition

Troubleshooting of Modulator DC power supply at KOMAC

Energy Technology Data Exchange (ETDEWEB)

Jeong, Hae Seong; Kim, Han Sung; Kwon, Hyeok Jung; Kim, Seong Gu; Kim, Dae Il; Lee, Seok Geun; Kim, Jae Ha; Seol, Kyeong Tae; Cho, Yong Sub [KAERI, Daejeon (Korea, Republic of)

2016-05-15

The process of solving problems to operate the 2nd converter modulator will be introduced. Also, the PSpice simulation result about the 12-pulse rectifier will be compared with the measurement result. KOMAC (KOrea Multi-purpose Accelerator Complex) has four HVCMs (High Voltage Converter Modulator) which are the power source of nine klystrons. Four HVCMs are already operated since 2013 for operating the 100 MeV linear proton accelerator at KOMAC. This HVCM system includes the 12-pulse rectifier (ac-dc), capacitors bank (dc-link, Pos, Neg) and converter modulator (dc-dc). Especially, the 12-pulse rectifier system receives the power from the utility and converts 3,300 ac voltage to 2,200 dc voltage for supplying the dc power to the capacitors bank. This rectifier system used twelve thyristors for the rectification and applied RC snubber networks to protect the semiconductor switches (thyristors). Since the 2nd modulator dc power supply has troubled, the troubleshooting process conducted by the staves of KOMAC. It takes 3 months to solve the problems because it is not easy to find the faulty wiring. Nevertheless, our staves found the faulty point with a hope to operate the modulator system and the PSpice simulation helps to solve the problems. Using PSpice which is tool for simulating the circuit, the dc power supply abnormal phenomenon was simulated exactly. After corrected the faulty wiring, the modulator dc power supply operated.

Geometry Optimization of DC/RF Photoelectron Gun

CERN Document Server

Chen Ping; Yu, David

2005-01-01

Pre-acceleration of photoelectrons in a pulsed, high voltage, short, dc gap and its subsequent injection into an rf gun is a promising method to improve electron beam emittance in rf accelerators. Simulation work has been performed in order to optimize the geometric shapes of a dc/rf gun and improve electron beam properties. Variations were made on cathode and anode shapes, dc gap distance, and inlet shape of the rf cavity. Simulations showed that significant improvement on the normalized emittance (< 1 mm-mrad), compared to a dc gun with flat cathode, could be obtained after the geometric shapes of the gun were optimized.

Modeling, Control and Protection of Low-Voltage DC Microgrids

OpenAIRE

Salomonsson, Daniel

2008-01-01

Current trends in electric power consumption indicate an increasing use of dc in end-user equipment, such as computers and other electronic appliances used in households and offices. With a dc power system, ac/dc conversion within these loads can be avoided, and losses reduced. AC/DC conversion is instead centralized, and by using efficient, fully controllable power-electronic interfaces, high power quality for both ac and dc systems during steady state and ac grid disturbances can be obtaine...

A ZVS PWM control strategy with balanced capacitor current for half-bridge three-level DC/DC converter

DEFF Research Database (Denmark)

Liu, Dong; Deng, Fujin; Chen, Zhe

2017-01-01

The capacitor current would be imbalanced under the conventional control strategy in the half-bridge three-level (HBTL) DC/DC converter due to the effect of the output inductance of the power supply and the input line inductance, which would affect the converter's reliability. This paper proposes...... a pulse-wide modulation (PWM) strategy composed of two operation modes for the HBTL DC/DC converter, which can realize the zero-voltage switching (ZVS) for the efficiency improvement. In addition, a capacitor current balancing control is proposed by alternating the two operation modes of the proposed ZVS...... PWM strategy, which can eliminate the current imbalance among the two input capacitors. Therefore, the proposed control strategy can improve the converter's performance and reliability in: 1) reducing the switching losses and noises of the power switches; 2) balancing the thermal stresses...

Novel family of quasi-Z-source DC/DC converters derived from current-fed push-pull converters

DEFF Research Database (Denmark)

Chub, Andrii; Husev, Oleksandr; Vinnikov, Dmitri

2014-01-01

This paper is devoted to the step-up quasi-Z-source dc/dc push-pull converter family. The topologies in the family are derived from the isolated boost converter family by replacing input inductors with the quasi-Z-source network. Two new topologies are proposed, analyzed and compared. Theoretical...

75 FR 35611 - Airworthiness Directives; McDonnell Douglas Corporation Model DC-10-10, DC-10-10F, and MD-10-10F...

Science.gov (United States)

2010-06-23

... Airworthiness Directives; McDonnell Douglas Corporation Model DC- 10-10, DC-10-10F, and MD-10-10F Airplanes... certain McDonnell Douglas Model DC-10-10, DC-10-10F, and MD-10-10F airplanes. That NPRM was published in... amends Sec. 39.13 by adding the following new AD: 2010-13-06 McDonnell Douglas Corporation: Amendment 39...

Active superconducting DC fault current limiter based on flux compensation

International Nuclear Information System (INIS)

Shi Jing; Tang Yuejin; Wang, Chen; Zhou Yusheng; Li Jingdong; Ren Li; Chen Shijie

2006-01-01

With the extensive application of DC power systems, suppression of DC fault current is an important subject that guarantees system security. This paper presents an active superconducting DC fault current limiter (DC-SFCL) based on flux compensation. The DC-SFCL is composed of two superconducting windings wound on a single iron core, the primary winding is in series with DC power system, and the second winding is connected with AC power system through a PWM converter. In normal operating state, the flux in the iron core is compensated to zero, and the SFCL has no influence on DC power system. In the case of DC system accident, through regulating the active power exchange between the SFCL's second winding and the AC power system, the current on the DC side can be limited to different level complying with the system demand. Moreover, the PWM converter that interface the DC system and AC system can be controlled as a reactive power source to supply voltage support for the AC side, which has little influence on the performance of SFCL. Using MATLAB SIMULINK, the mathematic model of the DC-SFCL is created, simulation results validate the dynamics of system, and the performance of DC-SFCL is confirmed

A Decentralized Current-Sharing Controller Endows Fast Transient Response to Parallel DC-DC Converters

DEFF Research Database (Denmark)

Wang, Haojie; Han, Minxiao; Han, Renke

2018-01-01

This paper proposes a decentralized current-sharing control strategy to endow fast transient response to paralleled DC-DC converters systems, such as DC microgrids or distributed power systems. The proposed controller consist of two main control loops: an external voltage droop control for current......-sharing proposes and an internal current loop. The external droop control loop is designed as a voltage loop with embedded virtual impedance, which avoids the use of a slow voltage loop and a separate extra virtual impedance loop that may limit the system bandwidth. The internal current loop, thanks...... and the proposed embedded-virtual-impedance based I-V droop. In order to compare the dynamic response performances between two droop controllers, their state-space models have been developed and analyzed in this paper. The results show that the dynamic response of the I-V droop control is faster than...

A Reconfigurable Series Resonant DC-DC Converter for Wide-Input and Wide-Output Voltages

DEFF Research Database (Denmark)

Shen, Yanfeng; Wang, Huai; Qin, Zian

2017-01-01

This paper proposes a dual-bridge based LC series resonant dc-dc converter. The input inverter unit incorporates two bridge structures, i.e., a full-bridge inverter and a half-bridge inverter. For the output rectifier, it can be a full-bridge rectifier or an asymmetric half-bridge rectifier....... Different from the conventional resonant converter, a fixed-frequency PWM control is employed which makes the optimization of magnetic components easier. The primary-side switches can achieve ZVS and the secondary-side diodes turn off with ZCS. In addition, the root-mean-square (RMS) values...... of the transformer currents do not significantly vary with respect to the voltage variation. Therefore, this converter can maintain high efficiency over a wide voltage range. The topology and operating principle are firstly described. Then the dc voltage gain and the RMS current characteristics are detailed. Finally...

Modelling, simulation and construction of a dc/dc boost power converter: a school experimental system

International Nuclear Information System (INIS)

Silva-Ortigoza, R; Marciano-Melchor, M; Silva-Ortigoza, G; Hernández-Guzmán, V M; Saldaña-González, G; Marcelino-Aranda, M

2012-01-01

We introduce a dc/dc boost power converter as a didactic prototype intended to support courses on electric circuit analysis experimentally. The corresponding mathematical model is obtained, the converter is designed and an experimental setup is described, constructed and tested. Simplicity of construction as well as low cost of components renders the feasible introduction of this equipment in undergraduate laboratories. (paper)

Security analysis of interconnected AC/DC systems

DEFF Research Database (Denmark)

Eriksson, Robert

2015-01-01

This paper analyses N-1 security in an interconnected ac/dc transmission system using power transfer distribution factors (PTDFs). In the case of a dc converter outage the power needs to be redistributed among the remaining converter to maintain power balance and operation of the dc grid...... any line or transformer limits. Simulations were performed in a model of the Nordic power system where a dc grid is placed on top. The simulation supports the method as a tool to consider transfer limits in the grid to avoid violate the same and increase the security after a converter outage........ The redistribution of power has a sudden effect on the power-flow in the interconnected ac system. This may cause overloading of lines and transformers resulting in disconnection of equipment, and as a consequence cascading failure. The PTDF is used as a method to analyze and avoid violating limits by in the dc...

Systematic design approach of fuzzy PID stabilizer for DC-DC converters

International Nuclear Information System (INIS)

Guesmi, K.; Essounbouli, N.; Hamzaoui, A.

2008-01-01

DC-DC converters process electrical energy by switching between a fixed number of configurations. The objective of controlling these systems is to provide better performances, ensure closed loop stability and guarantee a simple predictable behaviour. Based on a converter averaged model, we propose, in this paper, a systematic design approach of a fuzzy PID. The choice of controller parameters stands on the whole system stability requirements. Extension of the obtained asymptotic stability to structural stability is presented to show that the developed controller ensures also a simple and predictable behaviour of the converter. Finally, we illustrate the efficiency of the proposed fuzzy PID design approach through simulations in voltage mode as well as in current mode control

Systematic design approach of fuzzy PID stabilizer for DC-DC converters

Energy Technology Data Exchange (ETDEWEB)

Guesmi, K.; Essounbouli, N.; Hamzaoui, A. [CReSTIC, IUT de Troyes 09, rue de Quebec BP. 396, 10026 Troyes (France)

2008-10-15

DC-DC converters process electrical energy by switching between a fixed number of configurations. The objective of controlling these systems is to provide better performances, ensure closed loop stability and guarantee a simple predictable behaviour. Based on a converter averaged model, we propose, in this paper, a systematic design approach of a fuzzy PID. The choice of controller parameters stands on the whole system stability requirements. Extension of the obtained asymptotic stability to structural stability is presented to show that the developed controller ensures also a simple and predictable behaviour of the converter. Finally, we illustrate the efficiency of the proposed fuzzy PID design approach through simulations in voltage mode as well as in current mode control. (author)

Deadbeat control of power leveling unit with bidirectional buck/boost DC/DC converter

OpenAIRE

Hamasaki, Shin-ichi; Mukai, Ryosuke; Yano, Yoshihiro; Tsuji, Mineo

2014-01-01

As a distributed generation system increases, a stable power supply becomes difficult. Thus control of power leveling (PL) unit is required to maintain the balance of power flow for irregular power generation. The unit is required to respond to change of voltage and bidirectional power flow. So the bidirectional buck/boost DC/DC converter is applied for the control of PL unit in this research. The PL unit with Electric double-layer capacitor (EDLC) is able to absorb change of power, and it is...

Conducted EMI Prediction and Mitigation Strategy Based on Transfer Function for a High-Low Voltage DC-DC Converter in Electric Vehicle

Directory of Open Access Journals (Sweden)

Li Zhai

2018-04-01

Full Text Available The high dv/dt and di/dt outputs from power devices in a high-low voltage DC-DC converter on electric vehicles (EVs can always introduce the unwanted conducted electromagnetic interference (EMI emissions. A conducted EMI prediction and mitigation strategy that is based on transfer function for the high-low voltage DC-DC converter in EVs are proposed. A complete test for the DC-DC converter is conducted to obtain the conducted EMI from DC power cables in the frequency band of 150 kHz-108 MHz. The equivalent circuit with high-frequency parasitic parameters of the DC-DC converter is built`1 based on the measurement results to acquire the characteristics of the conducted EMI of the DC power cables. The common mode (CM and differential mode (DM propagation coupling paths are determined, and the corresponding transfer functions of the DM interference and CM interference are established. The simulation results of the conducted EMI can be obtained by software Matlab and Computer Simulation Technology (CST. By analyzing the transfer functions and the simulation results, the dominated interference is the CM interference, which is the main factor of the conducted EMI. A mitigation strategy for the design of the CM interference filter based on the dominated CM interference is proposed. Finally, the mitigation strategy of the conducted EMI is verified by performing the conducted voltage experiment. From the experiment results, the conducted voltage of the DC power cables is decreased, respectively, by 58 dBμV, 55 dBμV, 65 dBμV, 53 dBμV, and 54 dBμV at frequency 200 kHz, 400 kHz, 600 kHz, 1.4 MHz, and 50 MHz. The conduced voltage in the frequency band of 150 kHz–108 MHz can be mitigated by adding the CM interference filters, and the values are lower than the limit level-3 of CISPR25 standard (GB/T 18655-2010.

Comparative efficiency evaluation of buck and hybrid buck DC-DC converters for automotive applications

DEFF Research Database (Denmark)

Pelan, Ovidiu; Cornea, Octavian; Muntean, Nicolae

2014-01-01

This paper presents and discusses design considerations and efficiency investigation of a conventional step-down and a hybrid switched-capacitor DC-DC converter. Three MOSFETs with low on-resistance have been tested for each converter in order to find the most adequate switch for this application....... The experimental results and comparative efficiency graphs were obtained with a 1kW laboratory prototype dedicated for a 42/14V dual voltage automotive system....

MEDOW - Multi-terminal DC Grid for Offshore Wind, Final report

DEFF Research Database (Denmark)

A DC grid based on multi-terminal voltage-source converter is a newly emerging technology, which is particularly suitable for the connection of offshore wind farms. Multi-terminal DC grids will be the key technology for the European offshore ‘Super Grid’. In the project, DC power flow, DC relaying...... protection, steady state operation, dynamic stability, fault-ride through capability, and impacts of DC grids on the operation of AC grids and power market were studied. Systematic comparison of DC grid topologies and stability control strategies was carried out, and DC grids for offshore wind power...

Kingsnorth-London dc transmission link

Energy Technology Data Exchange (ETDEWEB)

1966-03-11

The hvdc transmission link between one of the 500 MW generators at Kingsnorth Power Station and two receiving stations in London will use a three-wire dc cable system rated to carry 1200 A at +- 266 kV. This 51-mile system will be the first dc link in the world to be used as an integral part of a complex interconnected ac network.

Dual wound dc brush motor gearhead

Science.gov (United States)

Henson, Barrie W.

1986-01-01

The design requirements, the design, development tests and problems, the qualification and life test and the findings of the strip examination of a dual wound DC brushed motor gearhead are described. It is the only space qualified dual wound dc brushed motor gearhead in Europe.

Analysis and Controller Design of a Universal Bidirectional DC-DC Converter

Directory of Open Access Journals (Sweden)

Kou-Bin Liu

2016-06-01

Full Text Available In this paper, first the operating principles of a non-isolated universal bidirectional DC-DC converter are studied and analyzed. The presented power converter is capable of operating in all power transferring directions in buck/boost modes. Zero voltage switching can be achieved for all the power switches through proper modulation strategy design, therefore, the presented converter can achieve high efficiency. To further improve the efficiency, the relationship between the phase-shift angle and the overall system efficiency is analyzed in detail, an adaptive phase-shift (APS control method which determines the phase-shift value between gating signals according to the load level is then proposed. As the modulation strategy is a software-based solution, there is no requirement for additional circuits, therefore, it can be implemented easily and instability and noise susceptibility problems can be reduced. To validate the correctness and the effectiveness of the proposed method, a 300 W prototyping circuit is implemented and tested. A low cost dsPIC33FJ16GS502 digital signal controller is adopted in this paper to realize the power flow control, DC-bus voltage regulation and APS control. According to the experimental results, a 12.2% efficiency improvement at light load and 4.0% efficiency improvement at half load can be achieved.

Drilling history core hole DC-6 Hanford, Washington

International Nuclear Information System (INIS)

1978-06-01

Core hole DC-6 was completed in May 1978 by Boyles Brothers Drilling Company, Spokane, Washington, under subcontract to Fenix and Scisson, Inc. The hole was cored for the US Department of Energy and the Rockwell Hanford Operations' Basalt Waste Isolation Program. Fenix and Scisson, Inc. furnished the engineering, daily supervision of the core drilling activities, and geologic core logging for hole DC-6. Core hole DC-6 is located within the boundary of the Hanford Site at the old Hanford town site. The Hanford Site coordinates for DC-6 are North 54,127.17 feet and West 17,721.00 feet. The surface elevation is approximately 402 feet above sea level. The purpose of core hole DC-6 was to core drill vertically through the basalt and interbed units for stratigraphic depth determination and core collection and to provide a borehole for hydrologic testing. The total depth of core hole DC-6 was 4336 feet. Core recovery was 98.4% of the total footage cored

FPGA implementation of optimal and approximate model predictive control for a buck-boost DC-DC converter

NARCIS (Netherlands)

Spinu, V.; Oliveri, A.; Lazar, M.; Storace, M.

2012-01-01

This paper proposes a method for FPGA implementation of explicit, piecewise af¿ne (PWA) model predictive control (MPC) laws for non-inverting buck-boost DC-DC converters. A novel approach to obtain a PWA model of the power converter is proposed and two explicit MPC laws are derived, i.e., one based

Effect of Cymbopogon citratus (lemongrass) and Syzygium aromaticum (clove) oils on the morphology and mortality of Aedes aegypti and Anopheles dirus larvae.

Science.gov (United States)

Soonwera, Mayura; Phasomkusolsil, Siriporn

2016-04-01

Cymbopogon citratus (lemongrass) and Syzygium aromaticum (clove) oils were evaluated to determine mortality rates, morphological aberrations, and persistence when used against third and fourth larval instars of Aedes aegypti and Anopheles dirus. The oils were evaluated at 1, 5, and 10 % concentrations in mixtures with soybean oil. Persistence of higher concentrations was measured over a period of 10 days. For Ae. aegypti, both plant oils caused various morphological aberrations to include deformed larvae, incomplete eclosion, white pupae, deformed pupae, dead normal pupae, and incomplete pupal eclosion. All of these aberrations led to larval mortality. In Ae. aegypti larvae, there were no significant differences in mortality at days 1, 5, and 10 or between third and fourth larval instar exposure. In An. dirus, morphological aberrations were rare and S. aromaticum oil was more effective in causing mortality among all larval stages. Both oils were equally effective at producing mortality on days 1, 5, and 10. Both oils had slightly increased LT50 rates from day 1 to day 10. In conclusion, both lemongrass and clove oils have significant effects on the immature stages of Ae. aegypti and An. dirus and could potentially be developed for use as larvicides.

Stability analysis of a three-phase grid-connected DC power supply with small DC-link capacitor and voltage feed-forward compensation

DEFF Research Database (Denmark)

Török, Lajos; Mathe, L.

2017-01-01

The purpose of this work was to investigate effect of the DC-link voltage feed-forward compensation on the stability of the three-phase-grid connected DC power supply, used for electrolysis application, equipped with small DC link capacitor. In case of weak grid condition, the system...

Design and Implementation of Battery Charger with Power Factor Correction using Sepic Converter and Full-bridge DC-DC Converter

Directory of Open Access Journals (Sweden)

Moh. Zaenal Efendi

2013-12-01

Full Text Available This paper presents a design and implementation of a converter which has a high power factor for battery charger application. The converter is a combination of a SEPIC converter and a full-bridge DC-DC converter connected in two stages of series circuit. The SEPIC converter works in discontinuous conduction mode and it serves as a power factor corrector so that the shape of input current waveform follows the shape of input voltage waveform. The full-bridge DC-DC converter serves as a regulator of output voltage and operates at continuous conduction mode. The experimental results show that the power factor of this converter system can be achieved up to 0.96.

Modified High Voltage Conversion Inverting Cuk DC-DC Converter for Renewable Energy Application

DEFF Research Database (Denmark)

Maroti, Pandav Kiran; Padmanaban, Sanjeevikumar; Wheeler, Patrick

2017-01-01

controlled device DC-DC topology. The voltage conversion ratio of proposed converter has increased by ten times of the conventional Cuk converterat a duty ratio of 90%. The detailed analysis of the voltage conversion ratio and losses occur due to internal resistance of components is done in the paper......The proposed exertion represents the modified high voltage conversion Cuk converter for renewable energy application. The proposed Cuk converter is a combination of the conventional boost converter and Cuk converter. The arrangement of the proposed converter make, such as, it becomes the single...

A DC Transformer

Data.gov (United States)

National Aeronautics and Space Administration — The goal of the project was to demonstrate a true direct current (DC) transformer, a new electro-mechanical component with potentially high power applications; in...

Unregulated Series Resonant Converter for Interlinking DC Nanogrids

DEFF Research Database (Denmark)

Tomas Manez, Kevin; Zhang, Zhe; Ouyang, Ziwei

2017-01-01

bidirectional converter to interlink a 400V DC bus with a 48V DC bus ispresented. The proposed converter is based on a LLC resonant converter operating as a DC transformer at a fixed frequency and duty cycle without any complex control strategy. A clearand simplified design procedure for high efficiency...

High voltage dc-dc converter with dynamic voltage regulation and decoupling during load-generated arcs

Science.gov (United States)

Shimer, Daniel W.; Lange, Arnold C.

1995-01-01

A high-power power supply produces a controllable, constant high voltage output under varying and arcing loads. The power supply includes a voltage regulator, an inductor, an inverter for producing a high frequency square wave current of alternating polarity, an improved inverter voltage clamping circuit, a step up transformer, an output rectifier for producing a dc voltage at the output of each module, and a current sensor for sensing output current. The power supply also provides dynamic response to varying loads by controlling the voltage regulator duty cycle and circuitry is provided for sensing incipient arc currents at the output of the power supply to simultaneously decouple the power supply circuitry from the arcing load. The power supply includes a plurality of discrete switching type dc--dc converter modules.

High voltage dc--dc converter with dynamic voltage regulation and decoupling during load-generated arcs

Science.gov (United States)

Shimer, D.W.; Lange, A.C.

1995-05-23

A high-power power supply produces a controllable, constant high voltage output under varying and arcing loads. The power supply includes a voltage regulator, an inductor, an inverter for producing a high frequency square wave current of alternating polarity, an improved inverter voltage clamping circuit, a step up transformer, an output rectifier for producing a dc voltage at the output of each module, and a current sensor for sensing output current. The power supply also provides dynamic response to varying loads by controlling the voltage regulator duty cycle and circuitry is provided for sensing incipient arc currents at the output of the power supply to simultaneously decouple the power supply circuitry from the arcing load. The power supply includes a plurality of discrete switching type dc--dc converter modules. 5 Figs.

DC-DC Converter Topology Assessment for Large Scale Distributed Photovoltaic Plant Architectures

Energy Technology Data Exchange (ETDEWEB)

Agamy, Mohammed S; Harfman-Todorovic, Maja; Elasser, Ahmed; Sabate, Juan A; Steigerwald, Robert L; Jiang, Yan; Essakiappan, Somasundaram

2011-07-01

Distributed photovoltaic (PV) plant architectures are emerging as a replacement for the classical central inverter based systems. However, power converters of smaller ratings may have a negative impact on system efficiency, reliability and cost. Therefore, it is necessary to design converters with very high efficiency and simpler topologies in order not to offset the benefits gained by using distributed PV systems. In this paper an evaluation of the selection criteria for dc-dc converters for distributed PV systems is performed; this evaluation includes efficiency, simplicity of design, reliability and cost. Based on this evaluation, recommendations can be made as to which class of converters is best fit for this application.

SSP Technology Investigation of a High-Voltage DC-DC Converter

Science.gov (United States)

Pappas, J. A.; Grady, W. M.; George, Patrick J. (Technical Monitor)

2002-01-01

The goal of this project was to establish the feasibility of a high-voltage DC-DC converter based on a rod-array triggered vacuum switch (RATVS) for the Space Solar Power system. The RATVS has many advantages over silicon and silicon-carbide devices. The RATVS is attractive for this application because it is a high-voltage device that has already been demonstrated at currents in excess of the requirement for an SSP device and at much higher per-device voltages than existing or near-term solid state switching devices. The RATVS packs a much higher specific power rating than any solid-state device and it is likely to be more tolerant of its surroundings in space. In addition, pursuit of an RATVS-based system would provide NASA with a nearer-term and less expensive power converter option for the SSP.

DC-Evoked Modulation of Excitability of Myelinated Nerve Fibers and Their Terminal Branches; Differences in Sustained Effects of DC.

Science.gov (United States)

Kaczmarek, Dominik; Jankowska, Elzbieta

2018-03-15

Direct current (DC) evokes long-lasting changes in neuronal networks both presynaptically and postsynaptically and different mechanisms were proposed to be involved in them. Different mechanisms were also suggested to account for the different dynamics of presynaptic DC actions on myelinated nerve fibers stimulated before they entered the spinal gray matter and on their terminal branches. The aim of the present study was to examine whether these different dynamics might be related to differences in the involvement of K + channels. To this end, we compared effects of the K + channel blocker 4-amino-pyridine (4-AP) on DC-evoked changes in the excitability of afferent fibers stimulated within the dorsal columns (epidurally) and within their projection areas in the dorsal horn and motor nuclei (intraspinally). 4-AP was applied systemically in deeply anesthetized rats. DC-evoked increases in the excitability of epidurally stimulated afferent nerve fibers, and increases in field potentials evoked by these fibers, were not affected by 4-AP. In contrast, sustained decreases rather than increases in the excitability of intraspinally stimulated terminal nerve branches were evoked by local application of DC in conjunction with 4-AP. The study leads to the conclusion that 4-AP-sensitive K + channels contribute to the sustained DC-evoked post-polarization increases in the excitability at the level of terminal branches of nerve fibers but not of the nodes of Ranvier nor within the juxta-paranodal regions where other mechanisms would be involved in inducing the sustained DC-evoked changes. Copyright © 2018 IBRO. Published by Elsevier Ltd. All rights reserved.

Predictive Trailing-Edge Modulation Average Current Control in DC-DC Converters

Directory of Open Access Journals (Sweden)

LASCU, D.

2013-11-01

Full Text Available The paper investigates predictive digital average current control (PDACC in dc/dc converters using trailing-edge modulation (TEM. The study is focused on the recurrence duty cycle equation and then stability analysis is performed. It is demonstrated that average current control using trailing-edge modulation is stable on the whole range of the duty cycle and thus design problems are highly reduced. The analysis is carried out in a general manner, independent of converter topology and therefore the results can then be easily applied for a certain converter (buck, boost, buck-boost, etc.. The theoretical considerations are confirmed for a boost converter first using the MATLAB program based on state-space equations and finally with the CASPOC circuit simulation package.

Control of hybrid AC/DC microgrid under islanding operational conditions

DEFF Research Database (Denmark)

Ding, G.; Gao, F.; Zhang, S.

2014-01-01

This paper presents control methods for hybrid AC/DC microgrid under islanding operation condition. The control schemes for AC sub-microgrid and DC sub-microgrid are investigated according to the power sharing requirement and operational reliability. In addition, the key control schemes...... of interlinking converter with DC-link capacitor or energy storage, which will devote to the proper power sharing between AC and DC sub-microgrids to maintain AC and DC side voltage stable, is reviewed. Combining the specific control methods developed for AC and DC sub-microgrids with interlinking converter......, the whole hybrid AC/DC microgrid can manage the power flow transferred between sub-microgrids for improving on the operational quality and efficiency....

Analisa Perbandingan Efisiensi Motor Dc Kompon Pendek Dengan Motor Dc Kompon Panjang Akibat Penambahan Kutub

OpenAIRE

Sitompul, Fuad Rahim

2015-01-01

Motor listrik merupakan perangkat elekromagnetis yang mengubah energi listrik menjadi energi mekanik. Motor DC memerlukan tegangan searah pada kumparan medan untuk diubah menjadi energi mekanik. Energi mekanik ini digunakan sebagai penggerak peralatan listrik seperti pompa,penggerak kipas angin, lift dan lain-lain. Karena penggunaannya yang cukup luas maka kinerjanya harus baik. Kinerja suatu motor DC dikatakan baik jika efisiensi motor tersebut tinggi. Hal itu dapat dicapai dengan mengatur b...

A soft-switching coupled inductor bidirectional DC-DC converter with high-conversion ratio

Science.gov (United States)

Chao, Kuei-Hsiang; Jheng, Yi-Cing

2018-01-01

A soft-switching bidirectional DC-DC converter is presented herein as a way to improve the conversion efficiency of a photovoltaic (PV) system. Adoption of coupled inductors enables the presented converter not only to provide a high-conversion ratio but also to suppress the transient surge voltage via the release of the energy stored in leakage flux of the coupled inductors, and the cost can kept down consequently. A combined use of a switching mechanism and an auxiliary resonant branch enables the converter to successfully perform zero-voltage switching operations on the main switches and improves the efficiency accordingly. It was testified by experiments that our proposed converter works relatively efficiently in full-load working range. Additionally, the framework of the converter intended for testifying has high-conversion ratio. The results of a test, where a generating system using PV module array coupled with batteries as energy storage device was used as the low-voltage input side, and DC link was used as high-voltage side, demonstrated our proposed converter framework with high-conversion ratio on both high-voltage and low-voltage sides.

Solar Photovoltaic DC Systems: Basics and Safety: Preprint

Energy Technology Data Exchange (ETDEWEB)

McNutt, Peter F [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Sekulic, William R [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Dreifuerst, Gary [Lawrence Livermore National Laboratory - retired

2018-04-02

Solar Photovoltaic (PV) systems are common and growing with 42.4 GW installed capacity in U.S. (almost 15 GW added in 2016). This paper will help electrical workers, and emergency responders understand the basic operating principles and hazards of PV DC arrays. We briefly discuss the following aspects of solar photovoltaic (PV) DC systems: the effects of solar radiation and temperature on output power; PV module testing standards; common system configurations; a simple PV array sizing example; NEC guidelines and other safety features; DC array commissioning, periodic maintenance and testing; arc-flash hazard potential; how electrical workers and emergency responders can and do work safely around PV arrays; do moonlight and artificial lighting pose a real danger; typical safe operating procedures; and other potential DC-system hazards to be aware of. We also present some statistics on PV DC array electrical incidents and injuries. Safe PV array operation is possible with a good understanding of PV DC arrays basics and having good safe operating procedures in place.

Digital DC beam current measurement on SSRF storage ring

International Nuclear Information System (INIS)

Xiong Liang; Yin Chongxian; Liu Ming; Chen Jianfeng

2011-01-01

Both DC current transformer (DCCT) and integrating current transformer (ICT) can be used in DC beam current measurement. The ICT has strong capability of resisting electromagnetic interference, but its measurement accuracy cannot satisfy the DC beam current measurement requirement when using traditional high speed A/D. With high resolution A/D and equivalent sampling system, DC beam current measuring system based on ICT can reach high accuracy compared with DCCT system. In this paper, the ICT-based DC beam current measurement, equivalent sampling method and testing results at Shanghai Synchrotron Radiation Facility(SSRF) is described. (authors)

Method to predetermine current/power flow change in a dc grid

DEFF Research Database (Denmark)

2017-01-01

occurs at one of the AC/DC converters; establishing a generalized droop feedback gain matrix G; controlling current/power flow within DC grid towards predefined setpoints, by use of control law. The invention presents an analytical approach to derive the generalized feedback gain allowing......The invention relates to a method for controlling current/power flow within a power transmission system, comprising two or more interconnected converter stations. The method comprises the steps of: providing a DC admittance matrix given from the DC grid; providing a current distribution matrix...... for a number of, such as for all possible AC/DC converter outages; providing a DC bus voltage vector for the DC grid; the DC bus voltage vector being a vector containing the values of the voltage change at the AC/DC converters, measured at the AC/DC converters, before, during and after a forced current change...

Development of AC-DC power system simulator

International Nuclear Information System (INIS)

Ichikawa, Tatsumi; Ueda, Kiyotaka; Inoue, Toshio

1984-01-01

A modeling and realization technique is described for realtime plant dynamics simulation of nuclear power generating unit in AC-DC power system simulator. Dynamic behavior of reactor system and steam system is important for investigation a further adequate unit control and protection system to system faults in AC and DC power system. Each unit of two nuclear power generating unit in the power system simulator consists of micro generator, DC motors, flywheels and process computer. The DC motor and flywheel simulates dynamic characteristics of steam turbine, and process computer simulates plant dynamics by digital simulation. We have realized real-time plant dynamics simulation by utilizing a high speed process I/O and a high speed digital differential analyzing processor (DDA) in which we builted a newly developed simple plant model. (author)

Modeling and simulation for micro DC motor based on simulink

Science.gov (United States)

Shen, Hanxin; Lei, Qiao; Chen, Wenxiang

2017-09-01

The micro DC motor has a large market demand but there is a lack of theoretical research for it. Through detailed analysis of the commutation process of micro DC motor commutator, based on micro DC motor electromagnetic torque equation and mechanical torque equation, with the help of Simulink toolkit, a triangle connection micro DC motor simulation model is established. By using the model, a sample micro DC motor are simulated, and an experimental measurements has been carried on the sample micro DC motor. It is found that the simulation results are consistent with theoretical analysis and experimental results.

Comparison of two different high performance mixed signal controllers for DC/DC converters

DEFF Research Database (Denmark)

Jakobsen, Lars Tønnes; Andersen, Michael Andreas E.

2006-01-01

This paper describes how mixed signal controllers combining a cheap microcontroller with a simple analogue circuit can offer high performance digital control for DC/DC converters. Mixed signal controllers have the same versatility and performance as DSP based controllers. It is important to have...... an engineer experienced in microcontroller programming write the software algorithms to achieve optimal performance. Two mixed signal controller designs based on the same 8-bit microcontroller are compared both theoretically and experimentally. A 16-bit PID compensator with a sampling frequency of 200 k......Hz implemented in the 16 MIPS, 8-bit ATTiny26 microcontroller is demonstrated....

Loss Modelling and Experimental Verification of A 98.8% Efficiency Bidirectional Isolated DC-DC Converter

Directory of Open Access Journals (Sweden)

Ramachandran Rakesh

2017-01-01

In this paper, design and implementation of an ultra-high efficiency isolated bi-directional dc-dc converter utilizing GaN devices is presented. Loss modelling of the GaN converter is also included in this paper. The converter has achieved a maximum measured efficiency of 98.8% in both directions of power flow, using the same power components. Hardware prototype of the converter along with the measured efficiency curve is also presented in this paper.

Impact of Faults and Protection Methods on DC Microgrids Operation

DEFF Research Database (Denmark)

Bayati, Navid; Hajizadeh, Amin; N. Soltani, Mohsen

2018-01-01

with the DC Microgrid. This paper evaluates and presents a comprehensive review on the most recent studies in the DC Microgrids protection. Moreover, the fault behavior and characteristics of DC Microgrids, the effect of Constant Power Load (CPL) , and recent DC Microgrid protection methods are reviewed. Also...

Blind signal processing algorithms under DC biased Gaussian noise

Science.gov (United States)

Kim, Namyong; Byun, Hyung-Gi; Lim, Jeong-Ok

2013-05-01

Distortions caused by the DC-biased laser input can be modeled as DC biased Gaussian noise and removing DC bias is important in the demodulation process of the electrical signal in most optical communications. In this paper, a new performance criterion and a related algorithm for unsupervised equalization are proposed for communication systems in the environment of channel distortions and DC biased Gaussian noise. The proposed criterion utilizes the Euclidean distance between the Dirac-delta function located at zero on the error axis and a probability density function of biased constant modulus errors, where constant modulus error is defined by the difference between the system out and a constant modulus calculated from the transmitted symbol points. From the results obtained from the simulation under channel models with fading and DC bias noise abruptly added to background Gaussian noise, the proposed algorithm converges rapidly even after the interruption of DC bias proving that the proposed criterion can be effectively applied to optical communication systems corrupted by channel distortions and DC bias noise.

Seasonal change in main alkaloids of jaborandi (Pilocarpus microphyllus Stapf ex Wardleworth), an economically important species from the Brazilian flora

Science.gov (United States)

Véras, Leiz Maria Costa; Azevedo, Iábita Fabiana Sousa; Biase, Adriele Giaretta; Costa, Joana; Oliveira, Maria Beatriz P. P.; Mafra, Isabel

2017-01-01

Pilocarpus microphyllus Stapf ex Wardleworth (jaborandi, Rutaceae) is one of the most important Brazilian medicinal species owing to its content of pilocarpine (PIL), an alkaloid used for treating glaucoma and xerostomia. This species contains another alkaloid, epiisopiloturine (EPI), which has demonstrated effectiveness against schistosomiasis. The aim of this work was to assess seasonal changes of PIL and EPI in three populations of cultivated P. microphyllus from northeastern Brazil over one year, including the dry and rainy seasons. Alkaloid profiles were correlated to phenotypic and genetic patterns in the morphological and molecular characterizations. PIL was the primary alkaloid and its levels differed among populations in all months except September. The S01 population (green line) showed an especially high PIL content compared to populations S02 and S03 (traditional line), which had similar alkaloid contents. PIL content gradually decreased in the three populations in the rainy season.EPI content was significantly different between the green line (S01) and the traditional line (S02 and S03).S01 had a significantly lower EPI content in all months, demonstrating that it was not the best source for EPI extraction. Inter simple sequence repeat (ISSR) markers and morphological analyses clearly separated S01 from S02 and S03, in agreement with the alkaloid results. This study shows the first correlation between the chemical, morphological, and molecular markers of P. microphyllus and highlights the potential benefits of a multidisciplinary research approach aimed at supporting both industry and conservation of natural resources. PMID:28151972

Seasonal change in main alkaloids of jaborandi (Pilocarpus microphyllus Stapf ex Wardleworth, an economically important species from the Brazilian flora.

Directory of Open Access Journals (Sweden)

David Fernandes Lima

Full Text Available Pilocarpus microphyllus Stapf ex Wardleworth (jaborandi, Rutaceae is one of the most important Brazilian medicinal species owing to its content of pilocarpine (PIL, an alkaloid used for treating glaucoma and xerostomia. This species contains another alkaloid, epiisopiloturine (EPI, which has demonstrated effectiveness against schistosomiasis. The aim of this work was to assess seasonal changes of PIL and EPI in three populations of cultivated P. microphyllus from northeastern Brazil over one year, including the dry and rainy seasons. Alkaloid profiles were correlated to phenotypic and genetic patterns in the morphological and molecular characterizations. PIL was the primary alkaloid and its levels differed among populations in all months except September. The S01 population (green line showed an especially high PIL content compared to populations S02 and S03 (traditional line, which had similar alkaloid contents. PIL content gradually decreased in the three populations in the rainy season.EPI content was significantly different between the green line (S01 and the traditional line (S02 and S03.S01 had a significantly lower EPI content in all months, demonstrating that it was not the best source for EPI extraction. Inter simple sequence repeat (ISSR markers and morphological analyses clearly separated S01 from S02 and S03, in agreement with the alkaloid results. This study shows the first correlation between the chemical, morphological, and molecular markers of P. microphyllus and highlights the potential benefits of a multidisciplinary research approach aimed at supporting both industry and conservation of natural resources.

Bifurcation diagram features of a dc-dc converter under current-mode control

International Nuclear Information System (INIS)

Ruzbehani, Mohsen; Zhou Luowei; Wang Mingyu

2006-01-01

A common tool for analysis of the systems dynamics when the system has chaotic behaviour is the bifurcation diagram. In this paper, the bifurcation diagram of an ideal model of a dc-dc converter under current-mode control is analysed. Algebraic relations that give the critical points locations and describe the pattern of the bifurcation diagram are derived. It is shown that these simple algebraic and geometrical relations are responsible for the complex pattern of the bifurcation diagrams in such circuits. More explanation about the previously observed properties and introduction of some new ones are exposited. In addition, a new three-dimensional bifurcation diagram that can give better imagination of the parameters role is introduced