Kyoto commitments: CHP will help the UK

International Nuclear Information System (INIS)

Knowles, Michael

1998-01-01

In order to meet the United Kingdom's targets for carbon dioxide emissions reduction, agreed at the Kyoto Summit, the UK Government is promoting the use of combined heat and power (CHP) plants. Such schemes need to offer over 70% efficiency, have on-site or nearby heat uses, and allow flexibility for the export of electricity where this is appropriate. Electricity trading arrangements will need to be re-organised in line with similar commodities, in order to facilitate and promote the growth of CHP and renewable energy schemes. Financial incentives and regulation of electricity prices will also contribute to the promotion of CHP schemes, ultimately leading to reduced CO 2 pollution as a result of the growth in the UK's CHP capacity. (UK)

330 kWe Packaged CHP System with Reduced Emissions

Energy Technology Data Exchange (ETDEWEB)

Plahn, Paul [Cummins Power Generation, Minneapolis, MN (United States); Keene, Kevin [Cummins Power Generation, Minneapolis, MN (United States); Pendray, John [Cummins Power Generation, Minneapolis, MN (United States)

2015-03-31

The objective of this project was to develop a flexible, 330 kWe packaged Combined Heat and Power (CHP) system that can be deployed to commercial and light industrial applications at a lower total cost of ownership than current CHP solutions. The project resulted in a CHP system that is easy to use and inexpensive to install, offering world class customer support, while providing a low-emissions, higher-efficiency internal combustion engine for a CHP system of this size.

Dicty_cDB: CHP827 [Dicty_cDB

Lifescience Database Archive (English)

Full Text Available CH (Link to library) CHP827 (Link to dictyBase) - - - Contig-U15898-1 - (Link to Or...iginal site) CHP827F 148 - - - - - - Show CHP827 Library CH (Link to library) Clone ID CHP827 (Link to dicty...Base) Atlas ID - NBRP ID - dictyBase ID - Link to Contig Contig-U15898-1 Original site URL http://dictycdb.b...ments: (bits) Value N AC116984 |AC116984.2 Dictyostelium discoideum chromosome 2 map 2567470-3108875 strain ...18q21 clone:RP11-866E20, WORKING DRAFT SEQUENCE, 18 unordered pieces. 42 0.073 4 CK406764 |CK406764.1 AUF_IfLvr_212_c09 Ict

Toxin-antitoxin loci as stress-response-elements: ChpAK/MazF and ChpBK cleave translated RNAs and are counteracted by tmRNA

DEFF Research Database (Denmark)

Christensen, S.K.; Pedersen, K.; Hansen, Flemming G.

2003-01-01

Prokaryotic chromosomes encode toxin-antitoxin loci, often in multiple copies. In most cases, the function of these genes is not known. The chpA (mazEF) locus of Escherichia coli has been described as a cell killing module that induces bacterial apoptosis during nutritional stress. However, we...... found recently that ChpAK (MazF) does not confer cell killing but rather, induces a bacteriostatic condition from which the cells could be resuscitated. Results presented here yield a mechanistic explanation for the detrimental effect on cell growth exerted by ChpAK and the homologous ChpBK protein of E......AK cleaved tmRNA in its coding region. Thus, ChpAK and ChpBK inhibit translation by a mechanism very similar to that of E. coli RelE. On the basis of these results, we propose a model that integrates TA loci into general prokaryotic stress physiology....

Combined heat and power in the Swedish district heating sector-impact of green certificates and CO2 trading on new investments

International Nuclear Information System (INIS)

Knutsson, David; Werner, Sven; Ahlgren, Erik O.

2006-01-01

Combined heat and power (CHP) has been identified by the EU administration as an important means of reducing CO 2 -emissions and increasing the energy efficiency. In Sweden, only about one third of the demand for district heat (DH) is supplied from CHP. This share could be significantly larger if the profitability of CHP generation increased. The objective of this study was to analyse the extent to which the profitability for investments in new CHP plants in the Swedish DH sector have changed thanks to the recently implemented trading schemes for green certificates (TGCs) and CO 2 emissions (TEPs). The analysis was carried out using a simulation model of the Swedish DH sector in which the profitability of CHP investments for all DH systems, with and without the two trading schemes applied, is compared. In addition, a comparison was made of the changes in CHP generation, CO 2 emissions, and operation costs if investments are made in the CHP plant shown to be most profitable in each system according to the model. The study shows that the profitability of investments in CHP plants increased significantly with the introductions of TGC and TEP schemes. If all DH utilities also undertook their most profitable CHP investments, the results indicate a major increase in power generation which, in turn, would reduce the CO 2 emissions from the European power sector by up to 13 Mton/year, assuming that coal condensing power is displaced

Economic potentials of CHP connected to district heat systems in Germany. Implementation of the EU Efficiency Directive; Wirtschaftliche Potenziale der waermeleitungsgebundenen Siedlungs-KWK in Deutschland. Umsetzung der EU-Energieeffizienzrichtlinie

Energy Technology Data Exchange (ETDEWEB)

Eikmeier, Bernd [Fraunhofer-Institut fuer Fertigungstechnik und Angewandte Materialforschung IFAM, Bremen (Germany). Organisationseinheit Systemanalyse; Bremen Univ. (Germany)

2015-07-01

The EU Efficiency Directive (2012/27/EU) is requiring all member states to carry out an evaluation of the potential for highly efficient CHP and the efficient use of district heating and cooling by December 2015. The German Federal Ministry of Economic Affairs and Energy appointed this task to the Fraunhofer Institute for Manufacturing and Advanced Materials, division for Energy Systems Analysis (formerly Bremer Energie Institut) in conjunction with other partners. The results for the sector district- and communal heating with CHP, sub-sectors private households, trade and services industry, are presented in this article.

CHP Partnership Partners

Science.gov (United States)

Partners of EPA's Combined Heat and Power Partnership include federal, state, and local government agencies and private organizations such as energy users, energy service companies, CHP project developers and consultants, and equipment manufacturers.

Micro-CHP systems for residential applications

International Nuclear Information System (INIS)

Paepe, Michel de; D'Herdt, Peter; Mertens, David

2006-01-01

Micro-CHP systems are now emerging on the market. In this paper, a thorough analysis is made of the operational parameters of 3 types of micro-CHP systems for residential use. Two types of houses (detached and terraced) are compared with a two storey apartment. For each building type, the energy demands for electricity and heat are dynamically determined. Using these load profiles, several CHP systems are designed for each building type. Data were obtained for two commercially available gas engines, two Stirling engines and a fuel cell. Using a dynamic simulation, including start up times, these five system types are compared to the separate energy system of a natural gas boiler and buying electricity from the grid. All CHP systems, if well sized, result in a reduction of primary energy use, though different technologies have very different impacts. Gas engines seem to have the best performance. The economic analysis shows that fuel cells are still too expensive and that even the gas engines only have a small internal rate of return (<5%), and this only occurs in favourable economic circumstances. It can, therefore, be concluded that although the different technologies are technically mature, installation costs should at least be reduced by 50% before CHP systems become interesting for residential use. Condensing gas boilers, now very popular in new homes, prove to be economically more interesting and also have a modest effect on primary energy consumption

The design of Chp plants

International Nuclear Information System (INIS)

Tomassetti, G.

2001-01-01

Chp is considered with a bottom-up view, as the most efficient way to satisfy the needs of the users. In order to achieve optimal results a particular care must be used in analyzing the thermal and electrical loads and their interactions. On this basis and taking into account the relationships among the user and the suppliers of electricity, fuels and heat, the energy market structure, the cost of energy and the tax assessment it is possible to properly design Chp plants with benefits for the users [it

Efficient production of automotive biofuels; Effektiv produktion av biodrivmedel

Energy Technology Data Exchange (ETDEWEB)

Gode, Jenny; Hagberg, Linus; Rydberg, Tomas; Raadberg, Henrik; Saernholm, Erik

2008-07-01

The report describes opportunities and consequences associated with biomass polygeneration plants, in particular the role that heat plants (HP) or combined heat and power plants (CHP) in district heating systems can play in the production of automotive biofuels. The aim of the report is to provide a knowledge base to stakeholders to help assess energy and environmental benefits associated with collaborative approaches in planning, constructing and operating energy plants. Several configurations are possible for an energy polygeneration plant, but this report focuses on configurations in which a plant for automotive biofuel production and a district heating system with HPs or CHPs have been integrated in some way in order to achieve added value. The modes of integration are several, e.g.: - Supply of process steam from the CHP to the fuel plant, by which the time of operation for the CHP can be extended; Supply of surplus heat from the fuel plant to the district heating system; Material exchange between the systems, by use of residue streams from the fuel plant as fuel in the HP/CHP; Surplus heat from the fuel plant used for drying of the solid fuel to the HP/CHP or for drying of raw material for pellets production; Co-location providing opportunities for shared infrastructure for raw material handling, service systems, utilities and/or logistics. The report principally addresses integration options of the first three types, but describes briefly also pellets production. The starting point for the analysis of integration options is the description of technologies of interest for the production of automotive biofuels. Commercially available technologies are of prime interest, but also a couple of technologies under development are included in this part of the study. In addition to outlining the process characteristics for these processes, surrounding conditions and system requirements are briefly outlined. The results are summarized in Table S1. Ethanol fermentation

Stockholm CHP potential - An opportunity for CO2 reductions?

International Nuclear Information System (INIS)

Danestig, Maria; Gebremehdin, Alemayehu; Karlsson, Bjoern

2007-01-01

The potential for combined heat and power (CHP) generation in Stockholm is large and a total heat demand of about 10 TWh/year can be met in a renewed large district heating system. This model of the Stockholm district heating system shows that CHP generation can increase from 8% in 2004 to 15.5% of the total electricity generation in Sweden. Increased electricity costs in recent years have awakened an interest to invest in new electricity generation. Since renewable alternatives are favoured by green certificates, bio-fuelled CHP is most profitable at low electricity prices. Since heat demand in the district heating network sets the limit for possible electricity generation, a CHP alternative with a high electricity to heat ratio will be more profitable at when electricity prices are high. The efficient energy use in CHP has the potential to contribute to reductions in carbon dioxide emissions in Europe, when they are required and the European electricity market is working perfectly. The potential in Stockholm exceeds Sweden's undertakings under the Kyoto protocol and national reduction goals. (author)

Simulating conditions for combined heat and power in the Swedish district heating sector

International Nuclear Information System (INIS)

Knutsson, David

2005-01-01

The most important issues in the European energy sector today are how to increase competitiveness on the energy markets, reduce both CO2 emissions and dependence on imported fuels. These issues are also important aspects of Swedish energy policy. In Sweden, the district heating (DH) sector has commonly been used to achieve Swedish energy policy goals. However, the ongoing integration and deregulation of the energy markets in Europe now means that the Swedish DH sector can also play an important role in achieving international targets. This thesis investigates the extent to which the Swedish DH sector can contribute to compliance with current energy policy targets, both international and Swedish. The study consisted of simulations of the Swedish DH sector response to various policy instruments in a model that takes the local features of virtually all Swedish DH systems into account. The findings show, for example, that there is great potential for combined heat and power (CHP) generation in the Swedish DH sector. By exporting this CHP electricity to other European countries with less effective and fossil dependent power generation plants, the CO2 emissions from the European energy sector could be substantially reduced. This would also result in increased security of supply and competitiveness in the EU, since fuel use would be more effective. In Sweden, increased CHP generation would also be a way of maintaining an effective national security of supply of power

Evaluation of an alkaline fuel cell system as a micro-CHP

International Nuclear Information System (INIS)

Verhaert, Ivan; Mulder, Grietus; De Paepe, Michel

2016-01-01

Highlights: • Sensitivity analysis on system configuration of the AFC as a micro-CHP. • Flow rate in the secondary heating circuit can be used to control water management. • Part load behavior of fuel cells is compared to other micro-CHP technologies. • For future energy demand in buildings fuel cells have the best performance. - Abstract: Micro-cogeneration is an emerging technology to reduce the non-renewable energy demand in buildings and reduce peak load in the grid. Fuel cell based cogeneration (CHP) has interesting prospects for building applications, even at relatively low heat demand. This is due to their partial load behavior which is completely different, compared to other micro-CHP technologies. Within the fuel cell technologies suitable for small scale CHP or micro-CHP, the existing configuration of an alkaline fuel cell system is analyzed. This analysis is based on validated models and offers a control strategy to optimize both water management and energy performance of the alkaline fuel cell system. Finally, the model of the alkaline fuel cell system with optimized control strategy is used to compare its part load behavior to other micro-CHP technologies.

Energy efficiency analysis and impact evaluation of the application of thermoelectric power cycle to today's CHP systems

DEFF Research Database (Denmark)

Chen, Min; Lund, Henrik; Rosendahl, Lasse

2010-01-01

benefits, together with the environmental impact of this deployment, will then be estimated. By using the Danish thermal energy system as a paradigm, this paper will consider the TEG application to district heating systems and power plants through the EnergyPLAN model, which has been created to design......High efficiency thermoelectric generators (TEG) can recover waste heat from both industrial and private sectors. Thus, the development and deployment of TEG may represent one of the main drives for technological change and fuel substitution. This paper will present an analysis of system efficiency...... configurations for combustion systems. The feasible deployment of TEG in various CHP plants will be examined in terms of heat source temperature range, influences on CHP power specification and thermal environment, as well as potential benefits. The overall conversion efficiency improvements and economic...

CHP expansion strategy in North Rhine-Westphalia. A blueprint for other regions

International Nuclear Information System (INIS)

Holzapfel, Dominik; Schneider, Sabine

2015-01-01

The North Rhine-Westphalian state government intends to increase the share of combined heat and power (CHP) generation to at least 25 % by 2020. Since 2013, the campaign ''CHP.NRW - Power Meets Heat'' (''KWK.NRW - Strom trifft Waerme'') of the EnergyAgency.NRW, is has been running on behalf of the NRW Climate Protection Ministry, to publicise this technology and to promote its expansion. The campaign accompanies the State Government's CHP Stimulus Programme. The EnergyAgency.NRW has organised companies and research institutions, associations and interest groups under the umbrella of ''CHP.NRW - Power Meets Heat'', aiming at co-ordinated and intensified activities in the field of combined heat and power generation. The target of the initial-project ''roadmap/CHP.NRW'' of the ''Virtual Institute / CHP.NRW'' is to develop a guideline for the application and optimisation of CHP-systems.

Micro-CHP Systems for Residential Applications

Energy Technology Data Exchange (ETDEWEB)

Timothy DeValve; Benoit Olsommer

2007-09-30

Integrated micro-CHP (Cooling, Heating and Power) system solutions represent an opportunity to address all of the following requirements at once: conservation of scarce energy resources, moderation of pollutant release into our environment, and assured comfort for home-owners. The objective of this effort was to establish strategies for development, demonstration, and sustainable commercialization of cost-effective integrated CHP systems for residential applications. A unified approach to market and opportunity identification, technology assessment, specific system designs, adaptation to modular product platform component conceptual designs was employed. UTRC's recommendation to U.S. Department of Energy is to go ahead with the execution of the proposed product development and commercialization strategy plan under Phase II of this effort. Recent indicators show the emergence of micro-CHP. More than 12,000 micro-CHP systems have been sold worldwide so far, around 7,500 in 2004. Market projections predict a world-wide market growth over 35% per year. In 2004 the installations were mainly in Europe (73.5%) and in Japan (26.4%). The market in North-America is almost non-existent (0.1%). High energy consumption, high energy expenditure, large spark-spread (i.e., difference between electricity and fuel costs), big square footage, and high income are the key conditions for market acceptance. Today, these conditions are best found in the states of New York, Pennsylvania, New Jersey, Wisconsin, Illinois, Indiana, Michigan, Ohio, New England states. A multiple stage development plan is proposed to address risk mitigation. These stages include concept development and supplier engagement, component development, system integration, system demonstration, and field trials. A two stage commercialization strategy is suggested based on two product versions. The first version--a heat and power system named Micro-Cogen, provides the heat and essential electrical power to the

Methodology for evaluation of industrial CHP production

International Nuclear Information System (INIS)

Pavlovic, Nenad V.; Studovic, Milovan

2000-01-01

At the end of the century industry switched from exclusive power consumer into power consumer-producer which is one of the players on the deregulated power market. Consequently, goals of industrial plant optimization have to be changed, making new challenges that industrial management has to be faced with. In the paper is reviewed own methodology for evaluation of industrial power production on deregulated power market. The methodology recognizes economic efficiency of industrial CHP facilities as a main criterion for evaluation. Energy and ecological efficiency are used as additional criteria, in which implicit could be found social goals. Also, methodology recognizes key and limit factors for CHP production in industry. It could be successful applied, by use of available commercial software for energy simulation in CHP plants and economic evaluation. (Authors)

Efficient use of green taxes in the CHP sector

International Nuclear Information System (INIS)

Skovsgaard Nielsen, L.; Mognesen, Martin Frank; Pade, L.L.

2007-06-01

Since 1977 green taxes have been used in the Danish power and heat sector. Green taxes principally assure an efficient, market-based reduction of pollution by reducing the energy consumption or increasing the share of renewable energy in power and heat production. This report takes its point of departure in four potential barriers which prevent a marketbased, cost-effective increase of the proportion of renewable energy in power and heat production. We primarily concentrate on three policy measures. 5. green and lessgreen taxes; 6. mandatory combined heat and power production; 7. fuel restrictions. Furthermore, we analyse a fourth characteristic in the law: 8. high transactions costs connected to the enlargement of renewable energy. The purpose of the report is to describe how the four potential barriers contradict the theoretically efficient application of green taxes in the power and heat sector. We do this: 1) by clarifying how legislation in the power and heat sector affects the extension of renewable energy; and 2) by evaluating the theoretically efficient application of green taxes in the power and heat sector in relation to legislation. (au)

Biomass CHP Catalog of Technologies

Science.gov (United States)

This report reviews the technical and economic characterization of biomass resources, biomass preparation, energy conversion technologies, power production systems, and complete integrated CHP systems.

Optimal designs of small CHP plants in a market with fluctuating electricity prices

International Nuclear Information System (INIS)

Lund, H.; Andersen, A.N.

2005-01-01

Combined Heat and Power production (CHP) are essential for implementation of the climate change response objectives in many countries. In an introduction period, small CHP plants have typically been offered fixed electricity prices, but in many countries, such pricing conditions are now being replaced by spot market prices. Consequently, new methodologies and tools for the optimisation of small CHP plant designs are needed. The small CHP plants in Denmark are already experienced in optimising their electricity production against the triple tariff, which has existed for almost 10 years. Consequently, the CHP plants have long term experience in organising when to switch on and off the CHP units in order to optimise their profit. Also, the CHP owners have long term experience in designing their plants. For instance, small CHP plants in Denmark have usually invested in excess capacity on the CHP units in combination with heat storage capacity. Thereby, the plants have increased their performance in order to optimise revenues. This paper presents the Danish experience with methodologies and software tools, which have been used to design investment and operation strategies for almost all small CHP plants in Denmark during the decade of the triple tariff. Moreover, the changes in such methodologies and tools in order to optimise performance in a market with fluctuating electricity prices are presented and discussed

Multi-criteria evaluation for CHP system options

International Nuclear Information System (INIS)

Pilavachi, P.A.; Roumpeas, C.P.; Minett, S.; Afgan, N.H.

2006-01-01

Several Combined Heat and Power (CHP) system options have been considered for evaluation with respect to the end-user requirements. These included Internal Combustion Engines (Otto and Diesel), Gas Turbines, Steam Turbines and Combined Cycles covering a wide range of electrical output. Data have been obtained from literature and the CHP systems have been evaluated using different criteria such as overall efficiency, investment cost, fuel cost, electricity cost, heat cost, CO 2 production and footprint. A multi-criteria method is used with an agglomeration function based on the statistical evaluation of weight factors. The technical, economic and social aspects of each system have been evaluated in an integrated manner and the results have been compared by means of the Sustainability Index. Based on the above criteria and depending on the user requirements, the best CHP system options have been established

Mississippi State University Cooling, Heating, and Power (Micro-CHP) and Bio-Fuel Center

Energy Technology Data Exchange (ETDEWEB)

Mago, Pedro [Mississippi State Univ., Mississippi State, MS (United States); Newell, LeLe [Mississippi State Univ., Mississippi State, MS (United States)

2014-01-31

Between 2008 and 2014, the U.S. Department of Energy funded the MSU Micro-CHP and Bio-Fuel Center located at Mississippi State University. The overall objective of this project was to enable micro-CHP (micro-combined heat and power) utilization, to facilitate and promote the use of CHP systems and to educate architects, engineers, and agricultural producers and scientists on the benefits of CHP systems. Therefore, the work of the Center focused on the three areas: CHP system modeling and optimization, outreach, and research. In general, the results obtained from this project demonstrated that CHP systems are attractive because they can provide energy, environmental, and economic benefits. Some of these benefits include the potential to reduce operational cost, carbon dioxide emissions, primary energy consumption, and power reliability during electric grid disruptions. The knowledge disseminated in numerous journal and conference papers from the outcomes of this project is beneficial to engineers, architects, agricultural producers, scientists and the public in general who are interested in CHP technology and applications. In addition, more than 48 graduate students and 23 undergraduate students, benefited from the training and research performed in the MSU Micro-CHP and Bio-Fuel Center.

The implications of free allocation versus auctioning of EU ETS allowances for the power sector in the Netherlands

International Nuclear Information System (INIS)

Sijm, J.P.M.; Hers, J.S.; Lise, W.

2008-12-01

The main objective of the present study is to analyse the implications of shifting from free allocation to auctioning of EU ETS allowances (EUAs) for the power sector in the Netherlands. In order to achieve this objective, this study has used three methodological approaches, including theoretical, empirical and model analyses of the impact of free allocations versus auctioning of EUAs on the power sector, notably in the Netherlands. In addition, as Combined Heat and Power (CHP) plays a major role in the electricity sector of the Netherlands, the present study also pays some particular attention to the implications of shifting from free allocation to EUA auctioning for the CHP sector in the Netherlands

Small-scale biomass CHP using gasa turbines: a scoping study

International Nuclear Information System (INIS)

James, D.W.; Landen, R.

1996-01-01

Various options for small-scale (up to 250 KWe) Combined Heat and Power (CHP) plants evaluated in this scoping study. Plants using small gas turbines, and able to use biomass fuels when available are included. Three detailed case studies of small-scale biomass CHP plants are compared to match specific technical options with customer requirements. The commercial development of such biomass-fired CHP units, using gas turbines, is shown to be economically viable depending on fuel costs and the continuation of existing financial incentives. (UK)

Is micro-CHP price controllable under price signal controlled Virtual Power Plants?

DEFF Research Database (Denmark)

You, Shi; Træholt, Chresten; Poulsen, Bjarne

2011-01-01

As micro-combined heat and power (micro-CHP) systems move towards mass deployment together with other kinds of distributed energy resources (DER), an increasing emphasis has been placed on how to coordinate such a large diversified DER portfolio in an efficient way by the Virtual Power Plant (VPP...... for three different micro-CHP systems to investigate the feasibility of being controlled by price. Such analysis is relevant for both controller designs for micro-CHP systems and VPP related operations. The results indicate that controlling the micro-CHP systems by price is feasible but could result...

ANALYSIS OF CHP POTENTIAL AT FEDERAL SITES

Energy Technology Data Exchange (ETDEWEB)

HADLEY, S.W.

2002-03-11

This document was prepared at the request of the U.S. Department of Energy's (DOE's) Federal Energy Management Program (FEMP) under its Technical Guidance and Assistance and Project Financing Programs. The purpose was to provide an estimate of the national potential for combined heat and power (also known as CHP; cogeneration; or cooling, heating, and power) applications at federal facilities and the associated costs and benefits including energy and emission savings. The report provides a broad overview for the U.S. Department of Energy (DOE) and other agencies on when and where CHP systems are most likely to serve the government's best interest. FEMP's mission is to reduce the cost to and environmental impact of the federal government by advancing energy efficiency and water conservation, promoting the use of renewable energy, and improving utility management decisions at federal sites. FEMP programs are driven by its customers: federal agency sites. FEMP monitors energy efficiency and renewable energy technology developments and mounts ''technology-specific'' programs to make technologies that are in strong demand by agencies more accessible. FEMP's role is often one of helping the federal government ''lead by example'' through the use of advanced energy efficiency/renewable energy (EERE) technologies in its own buildings and facilities. CHP was highlighted in the Bush Administration's National Energy Policy Report as a commercially available technology offering extraordinary benefits in terms of energy efficiencies and emission reductions. FEMP's criteria for emphasizing a technology are that it must be commercially available; be proven but underutilized; have a strong constituency and momentum; offer large energy savings and other benefits of interest to federal sites and FEMP mission; be in demand; and carry sufficient federal market potential. As discussed in the report, CHP meets all

Micro-CHP Technologies Roadmap: Meeting 21st Century Residential Energy Needs

Energy Technology Data Exchange (ETDEWEB)

none,

2003-12-01

On June 11-12, 2003, at Greenbelt, Maryland, key stakeholders from industry, government agencies, universities, and others involved in combined heat and power and the residential buildings industry explores solutions to technical, institutional, and market barriers facing micro-combined heat and power systems (mCHP). Participants outlined a desired future for mCHP systems, identified specific interim technology cost and performance targets, and developed actions to achieve the interim targets and vision. This document, The Micro-CHP Technologies Roadmap, is a result of their deliberations. It outlines a set of actions that can be pursued by both the government and industry to develop mCHP appliances for creating a new approach for households to meet their energy needs.

CHP and District Cooling: An Assessment of Market and Policy Potential in India

Energy Technology Data Exchange (ETDEWEB)

NONE

2008-07-01

This report contains an assessment of India's CHP/DC status and recommendations for addressing barriers to allow India to meet its energy efficiency targets. Such barriers include a lack of governmental emphasis on CHP, the absence of a clear methodology for calculating CO2 emission reductions from CHP/DHC, and a tax and duty structure for CHP capital equipment that is not as attractive as for other renewable energy technologies.

The role of combined heat and power (CHP) in energy and climate policy

International Nuclear Information System (INIS)

Conrad, F.

1993-03-01

In the energy- and environment context CHP is said to be especially energy saving and climate preserving. This report shows that from the standpoint of energy economics as well as under technical aspects this judgement holds true only under special conditions. Depending on the technical parameters, the concrete circumstances of operation and the characteristics of the power plants and heating systems compared to CHP-plants the range of realistic energy savings turns out to be very large. Related overstimations are to a good extend caused by the traditional practice of granting the energetic advantage of CHP exclusively to the district heating. If this advantage is credited to heat and power as equal shares space heating with cogenerated power of 80% efficiency reveals to be very energy conserving. The uno actu utilization of cogenerated heat and power, for the same purpose could facilitate the expansion of CHP, since the problems related to the feeding of cogenerated power into the grid for general purposes would disappear. The second main issue of this report concerns the abatement of CO 2 -emissions with the aid of CHP. Fuelled with natural gas, CHP-plants are attractive instruments for climate policy. This is especially true if CHP is compared to old coal-based power plants and oil-fuelled old heating systems. In the FRG, however, hard coal, and not natural gas, will be the main fuel for future CHP, lowering its CO 2 -advantage considerably. On the other hand high efficient combi-power plants (gas turbine plus condensing turbine) and gas heating systems have to be included in the comparative analyse. Compared to these advanced systems the CO 2 -characteristics of CHP are inferior. Moreover, the specific CO 2 -advantage of natural gas is better used by such modern mono systems rather than CHP-plants. (orig.) [de

CHP as a Boiler Replacement Opportunity (Webinar) – April 30, 2013

Science.gov (United States)

This webinar provides information about the benefits of replacing a boiler with a CHP system, describes CHP project analysis and delivery processes, and highlights a case study at Penn State University.

Integrated transportation and energy sector CO2 emission control strategies

DEFF Research Database (Denmark)

Lund, Henrik; Münster, Ebbe

2006-01-01

is the use of biofuel (ethanol) and synthetic fuel (methanol) for internal combustion cars. An increase in the fraction of electricity delivered by fluctuating sources like wind power will lead to excess electricity production and the two aforementioned scenarios have a substantial effect on the decrease...... and power production (CHP), while the transport sector can assist the energy system in integrating a higher degree of intermittent energy and CHP. Two scenarios for partial conversion of the transport fleet have been considered. One is battery cars combined with hydrogen fuel cell cars, while the other...

Analyzing a self-managed CHP system for greenhouse cultivation as a profitable way to reduce CO2-emissions

International Nuclear Information System (INIS)

Compernolle, Tine; Witters, Nele; Van Passel, Steven; Thewys, Theo

2011-01-01

To counter global warming, a transition to a low-carbon economy is needed. The greenhouse sector can contribute by installing Combined Heat and Power (CHP) systems, known for their excellent energy efficiency. Due to the recent European liberalization of the energy market, glass horticulturists have the opportunity to sell excess electricity to the market and by tailored policy and support measures, regional governments can fill the lack of technical and economic knowledge, causing initial resistance. This research investigates the economic and environmental opportunities using two detailed cases applying a self managed cogeneration system. The Net Present Value is calculated to investigate the economic feasibility. The Primary Energy Saving, the CO 2 Emission Reduction indicator and an Emission Balance are applied to quantify the environmental impact. The results demonstrate that a self-managed CHP system is economic viable and that CO 2 emissions are reduced.

Screening of CHP Potential at Federal Sites in Select Regions of the U.S.

Energy Technology Data Exchange (ETDEWEB)

Energy Nexus Group, . .

2002-02-25

Combined Cooling Heat and Power (CHP) is a master term for onsite power generation technologies that sequentially produce electrical or mechanical energy and useful thermal energy. Some form of CHP has existed for more than 100 years and it is now achieving a greater level of acceptance due to an increasing need for reliable power service and energy cost management. Capturing and using the heat produced as a byproduct of generating electricity from fuel sources increases the usable energy that can be obtained from the original fuel source. CHP technologies have the potential to reduce energy consumption through increased efficiency--decreasing energy bills as well as pollution. The EPA recognizes CHP as a potent climate change mitigation measure. The U.S. Department of Energy (D.O.E.) Federal Energy Management Program (FEMP) is assisting Federal agencies to realize their energy efficiency goals. CHP is an efficiency measure that is receiving growing attention because of its sizable potential to provide efficiency, environmental, and reliability benefits. CHP therefore benefits the host facility, the electric infrastructure, and the U.S. society as a whole. This report and study seeks to make a preliminary inquiry into near term CHP opportunities for federal facilities in selected U.S. regions. It offers to help focus the attention of policy makers and energy facility managers on good candidate facilities for CHP. First, a ranked list of high potential individual sites is identified. Then, several classes of federal facilities are identified for the multiple opportunities they offer as a class. Recommendations are then offered for appropriate next steps for the evaluation and cost effective implementation of CHP. This study was designed to ultimately rank federal facilities in terms of their potential to take advantage of CHP economic and external savings in the near term. In order to best serve the purposes of this study, projections have been expressed in terms of

A study on electricity export capability of the μCHP system with spot price

DEFF Research Database (Denmark)

You, Shi; Træholt, Chresten; Poulsen, Bjarne

2009-01-01

of the muCHP unit, which influence the export capability of muCHP system, is firstly carried out in the intraday case study, followed by the annual case study which explores the annual system performance. The results show that the electricity export capability of a muCHP system is closely related to its...

Integration of hydrothermal carbonization and a CHP plant: Part 2 –operational and economic analysis

International Nuclear Information System (INIS)

Saari, Jussi; Sermyagina, Ekaterina; Kaikko, Juha; Vakkilainen, Esa; Sergeev, Vitaly

2016-01-01

Wood-fired combined heat and power (CHP) plants are a proven technology for producing domestic, carbon-neutral heat and power in Nordic countries. One drawback of CHP plants is the low capacity factors due to varying heat loads. In the current economic environment, uncertainty over energy prices creates also uncertainty over investment profitability. Hydrothermal carbonization (HTC) is a promising thermochemical conversion technology for producing an improved, more versatile wood-based fuel. Integrating HTC with a CHP plant allows simplifying the HTC process and extending the CHP plant operating time. An integrated polygeneration plant producing three energy products is also less sensitive to price changes in any one product. This study compares three integration cases chosen from the previous paper, and the case of separate stand-alone plants. The best economic performance is obtained using pressurized hot water from the CHP plant boiler drum as HTC process water. This has the poorest efficiency, but allows the greatest cost reduction in the HTC process and longest CHP plant operating time. The result demonstrates the suitability of CHP plants for integration with a HTC process, and the importance of economic and operational analysis considering annual load variations in sufficient detail. - Highlights: • Integration of wood hydrothermal carbonization with a small CHP plant studied. • Operation and economics of three concepts and stand-alone plants are compared. • Sensitivity analysis is performed. • Results show technical and thermodynamic analysis inadequate and misleading alone. • Minimizing HTC investment, extending CHP operating time important for profitability.

MICRO-CHP System for Residential Applications

Energy Technology Data Exchange (ETDEWEB)

Joseph Gerstmann

2009-01-31

This is the final report of progress under Phase I of a project to develop and commercialize a micro-CHP system for residential applications that provides electrical power, heating, and cooling for the home. This is the first phase of a three-phase effort in which the residential micro-CHP system will be designed (Phase I), developed and tested in the laboratory (Phase II); and further developed and field tested (Phase III). The project team consists of Advanced Mechanical Technology, Inc. (AMTI), responsible for system design and integration; Marathon Engine Systems, Inc. (MES), responsible for design of the engine-generator subsystem; AO Smith, responsible for design of the thermal storage and water heating subsystems; Trane, a business of American Standard Companies, responsible for design of the HVAC subsystem; and AirXchange, Inc., responsible for design of the mechanical ventilation and dehumidification subsystem.

Management of fluctuations in wind power and CHP comparing two possible Danish strategies

International Nuclear Information System (INIS)

Lund, H.; Clark, W.W.

2002-01-01

Both CHP (combined heat and power production) and wind power are important elements of Danish energy policy. Today, approximately 50% of both the Danish electricity and heat demand are produced in CHP and more than 15% of the electricity demand is produced by wind turbines. Both technologies are essential for the implementation of Danish climate change response objectives, and both technologies are intended for further expansion in the coming decade. Meanwhile, the integration of CHP and wind power is subject to fluctuations in electricity production. Wind turbines depend on the wind, and CHP depends on the heat demand. This article discusses and analyses two different national strategies for solving this problem. One strategy, which is the current official government policy known as the export strategy, proposes to take advantage of the Nordic and European markets for selling and buying electricity. In this case, surplus electricity from wind power and CHP simply will be sold to neighbouring countries. Another strategy, the self-supply strategy, runs the CHP units to meet both demand and the fluctuations in the wind scheduling. In this case, investments in heat storages are necessary and heat pumps have to be added to the CHP units. Based on official Danish energy policy and energy plans, this article quantifies the problem for the year 2015 in terms of the amount of surplus electricity, and investments in heat pumps, etc. needed to solve the problem are calculated. Based on these results between the two different strategies, the conclusion is that the self-supply strategy is recommended over the official export strategy. (author)

Carbon emissions reduction potential in the US chemicals and pulp and paper industries by applying CHP technologies

International Nuclear Information System (INIS)

Khrushch, M.; Worrell, E.; Price, L.; Martin, N.; Einstein, D.

1999-01-01

The chemical and the pulp/paper industries combined provide 55% of CHP generation in the US industry. Yet, significant potential for new CHP capacities exists in both industries. From the present steam consumption data, the authors estimate about 50 GW of additional technical potential for CHP in both industries. The reduced carbon emissions will be equivalent to 44% of the present carbon emissions in these industries. They find that most of the carbon emissions reductions can be achieved at negative costs. Depending on the assumptions used in calculations, the economic potential of CHP in these industries can be significantly lower, and carbon emissions mitigation costs can be much higher. Using sensitivity analyses, they determine that the largest effect on the CHP estimate have the assumptions in the costs of CHP technology, in the assumed discount rates, in improvements in efficiency of CHP technologies, and in the CHP equipment depreciation periods. Changes in fuel and electricity prices and the growth in the industries' steam demand have less of an effect. They conclude that the lowest carbon mitigation costs are achieved with the CHP facility is operated by the utility and when industrial company that owns the CHP unit can sell extra electricity and steam to the open wholesale market. Based on the results of the analyses they discuss policy implications

Future market relevance of CHP installations with electrical ratings from 1 to 1000 kW

International Nuclear Information System (INIS)

Eicher, H.; Rigassi, R.

2003-12-01

This report for the Swiss Federal Office of Energy (SFOE) discusses the future market relevance of combined heat and power (CHP) installations with electrical ratings from 1 to 1000 kW. Developments over the past ten years are reviewed. Important reductions in the price of motor-driven CHP units and the price of the electrical power produced are noted and commented on. The technical market potential of CHP units and the degree to which this potential has been implemented are commented on. Work done, including CHP implementation in the industrial, commercial and residential areas, is commented on. Future developments both in the technical area as well as in commercial areas are commented on. Micro-gas-turbine based CHP systems are also discussed, as are fuel-cell based systems in both the higher and lower capacity power generation area. The prospects for CHP systems in general in the electricity generation area are discussed

Thermodynamic evaluation of CHP (combined heat and power) plants integrated with installations of coal gasification

International Nuclear Information System (INIS)

Ziębik, Andrzej; Malik, Tomasz; Liszka, Marcin

2015-01-01

Integration of a CHP steam plant with an installation of coal gasification and gas turbine leads to an IGCC-CHP (integrated gasification combined cycle-combined heat and power). Two installations of coal gasification have been analyzed, i.e. pressurized entrained flow gasifier – case 1 and pressurized fluidized bed gasifier with CO_2 recirculation – case 2. Basing on the results of mathematical modelling of an IGCC-CHP plant, the algorithms of calculating typical energy indices have been derived. The following energy indices are considered, i.e. coefficient of heat performance and relative savings of chemical energy of fuels. The results of coefficients of heat performance are contained between 1.87 and 2.37. Values exceeding 1 are thermodynamically justified because the idea of cogeneration of heat and electricity based on combining cycles of the heat engine and heat pump the efficiency of which exceeds 1. Higher values concerning waste heat replace more thermodynamically effective sources of heat in CHP plants. Relative savings of the chemical energy of fuels are similar in both cases of IGCC-CHP plants and are contained between the lower value of the CHP (combined heat and power) plants fuelled with coal and higher value of CHP plants fired with natural gas. - Highlights: • Energy savings of fuel is an adequate measure of cogeneration. • Relative energy savings of IGCC-CHP is near the result of a gas and steam CHP. • COHP (coefficient of heat performance) can help to divide fuel between heat fluxes. • Higher values of COHP in the case of waste heat recovery result from the lower thermal parameters.

A microeconomic analysis of decentralized small scale biomass based CHP plants—The case of Germany

International Nuclear Information System (INIS)

Wittmann, Nadine; Yildiz, Özgür

2013-01-01

Alternative energy sources, such as biomass CHP plants, have recently gained significantly in importance and action is due both on the large scale corporate level and on the small scale. Hence, making the scope and economic outline of such projects easily intelligible without losing relevant details seems a key factor to further promote the necessary developments. The model setup presented in this paper may therefore serve as a starting point for generating numerical results based on real life cases or scenarios. Its focus lies on the economic analysis of decentralized biomass CHP plants. It presents a new approach to analyzing the economic aspects of biomass CHP plants implementing a formal microeconomic approach. As Germany claims a leading role in the market for renewable energy production, the paper also takes a closer look on the effects of German energy policy with respect to biomass CHP plants. - Highlights: • A formal microeconomic model is used to analyse a decentralized biomass CHP plant. • Model setup is used to generate numerical results based on real life scenarios. • Nested CES production function is a new approach to model economics of biomass CHP. • Analysis presents insight into microeconomics and cost drivers of biomass CHP. • Evaluation of energy policy design with respect to environmental policy goals

Analysis of the location for peak heating in CHP based combined district heating systems

International Nuclear Information System (INIS)

Wang, Haichao; Lahdelma, Risto; Wang, Xin; Jiao, Wenling; Zhu, Chuanzhi; Zou, Pinghua

2015-01-01

Combined heat and power (CHP) is the main technology for providing the base load of district heating in China. However, CHP is not efficient for providing the peak load; instead, a peak boiler with high efficiency could be used to compensate the peak load. This paper studies how the location of the peak boiler can affect the energy efficiency and economic performance of such CHP based combined district heating system. Firstly, the connection mode and the control strategy for different peak heating locations are analyzed. Then the effect of the peak boiler's location on the initial investment of the network and the cost for distributing heat is studied. The objective is to place the peak boiler in a location where the overall costs are the smallest. Following this rule, the results indicate that the peak boiler should be located at the CHP plant if that allows using cheaper ‘self-use electricity’ in CHP for distributing the heat. However, if the market electricity price is used everywhere, or if energy efficiency is more emphasized, the location of the peak boiler should be closer to the users with dense heat loads. - Highlights: • Location for peak heating in the CHP based combined DH system is studied. • Regulation or control strategies for combined DH are summarized. • The heat load duration curve for combined DH is demonstrated. • Network design for combined DH with peak boiler outside of the CHP is analyzed

Dynamic analysis of PEMFC-based CHP systems for domestic application

International Nuclear Information System (INIS)

Barelli, L.; Bidini, G.; Gallorini, F.; Ottaviano, A.

2012-01-01

Highlights: ► Dynamic model of a CHP energy system based on a PEM fuel cell was developed. ► The CHP system behavior at variable electrical and thermal load was investigated. ► The optimal RH value was assessed maximizing PEMFC performance through simulations. ► The system best operating conditions are characterized by a RH value equal to 50%. -- Abstract: Fuel cell-based CHP systems for distributed residential power generation represent an interesting alternative to traditional thermoelectric plants. This is mainly due to the high efficiency obtainable in the production of electricity and heat in a decentralised, quiet and environmental friendly way. The current paper focuses on the development, in Matlab®Simulink environment, of a complete dynamic model of a residential cogenerative (CHP) energy system consisting of the Proton Exchange Membrane fuel cell (PEMFC), fuel processor, heat exchangers, humidifier and auxiliary hot water boiler. The target of the study is the investigation through such a model of the behavior of CHP systems based on fuel cell (FC) at variable electrical and thermal load, in reference to typical load curves of residential users. With the aim to evaluate the system performance (efficiency, fuel consumption, hot water production, response time) and then to characterize its better operating conditions with particular attention to air relative humidity, suitable simulations were carried out. They are characterized by the following of a typical electrical load trend and in relation to two different thermal load profiles. The dynamic model presented in this paper has allowed to observe the fully functioning of the FC based system under variable loads and it has permitted to design appropriate control logics for this system.

Risk analysis for CHP decision making within the conditions of an open electricity market

International Nuclear Information System (INIS)

Al-Mansour, Fouad; Kozuh, Mitja

2007-01-01

Decision making under uncertainty is a difficult task in most areas. Investment decisions for combined heat and power production (CHP) are certainly one of the areas where it is difficult to find an optimal solution since the payback period is several years and parameters change due to different perturbing factors of economic and mostly political nature. CHP is one of the most effective measures for saving primary energy and reduction of greenhouse gas emissions. The implementation of EU directives on the promotion of cogeneration based on useful heat demand in the internal energy market will accelerate CHP installation. The expected number of small CHP installations will be very high in the near future. A quick, reliable and simple tool for economic evaluation of small CHP systems is required. Since evaluation is normally made by sophisticated economic computer models which are rather expensive, a simple point estimate economic model was developed which was later upgraded by risk methodology to give more informative results for better decision making. This paper presents a reliable computer model entitled 'Computer program for economic evaluation analysis of CHP' as a tool for analysis and economic evaluation of small CHP systems with the aim of helping the decision maker. The paper describes two methods for calculation of the sensitivity of the economic results to changes of input parameters and the uncertainty of the results: the classic/static method and the risk method. The computer program uses risk methodology by applying RISK software on an existing conventional economic model. The use of risk methodology for economic evaluation can improve decisions by incorporating all possible information (knowledge), which cannot be done in the conventional economic model due to its limitations. The methodology was tested on the case of a CHP used in a smaller hospital

Annual energy balances of CHP-units supplying households; Jahresenergiebilanzen von KWK-Anlagen zur Hausenergieversorgung

Energy Technology Data Exchange (ETDEWEB)

Geiger, B.; Muehlbacher, H. [Technische Univ. Muenchen (Germany). Lehrstuhl fuer Energiewirtschaft und Anwendungstechnik

2008-07-01

A method to balance CHP-units for use in households on an annual basis has been developed. Seasonal as well as intraday fluctuations of the CHP-units are accounted for in the model. The results of this new method were validated in a test facility for certain days. Together with experimentally obtained data from a CHP-unit, the potential for technical improvements and a more favourable operational mode can be derived from the model. (orig.)

Local CHP Plants between the Natural Gas and Electricity Systems

DEFF Research Database (Denmark)

Bregnbæk, Lars; Schaumburg-Müller, Camilla

2005-01-01

, and they contribute significantly to the electricity production. CHP is, together with the wind power, the almost exclusive distributed generation in Denmark. This paper deals with the CHP as intermediary between the natural gas system and the electricity system. In particular, the relationship between the peak hour......Local combined heat and power (CHP) plants in Denmark constitute an important part of the national energy conversion capacity. In particular they supply a large share of the district heating networks with heat. At the same time they are important consumers as seen from the gas network system...... characteristics of the electricity and gas systems will be investigated. The point is here that the two systems will tend to have peak demand during the same hours. This is the typical situation, since load is high during the same hours of the day and of the year. Moreover, the random variations in the load...

Procuring Stationary Fuel Cells For CHP: A Guide for Federal Facility Decision Makers

Energy Technology Data Exchange (ETDEWEB)

Stinton, David P [ORNL; McGervey, Joseph [SRA International, Inc.; Curran, Scott [ORNL

2011-11-01

Federal agency leaders are expressing growing interest in using innovative fuel cell combined heat and power (CHP) technology at their sites, motivated by both executive branch sustainability targets and a desire to lead by example in the transition to a clean energy economy. Fuel cell CHP can deliver reliable electricity and heat with 70% to 85% efficiency. Implementing this technology can be a high efficiency, clean energy solution for agencies striving to meet ambitious sustainability requirements with limited budgets. Fuel cell CHP systems can use natural gas or renewable fuels, such as biogas. Procuring Stationary Fuel Cells for CHP: A Guide for Federal Facility Decision Makers presents an overview of the process for planning and implementing a fuel cell CHP project in a concise, step-by-step format. This guide is designed to help agency leaders turn their interest in fuel cell technology into successful installations. This guide concentrates on larger (100 kW and greater) fuel cell CHP systems and does not consider other fuel cell applications such as cars, forklifts, backup power supplies or small generators (<100 kW). Because fuel cell technologies are rapidly evolving and have high up front costs, their deployment poses unique challenges. The electrical and thermal output of the CHP system must be integrated with the building s energy systems. Innovative financing mechanisms allow agencies to make a make versus buy decision to maximize savings. This guide outlines methods that federal agencies may use to procure fuel cell CHP systems with little or no capital investment. Each agency and division, however, has its own set of procurement procedures. This guide was written as a starting point, and it defers to the reader s set of rules if differences exist. The fuel cell industry is maturing, and project developers are gaining experience in working with federal agencies. Technology improvements, cost reductions, and experienced project developers are making

Design of Biomass Combined Heat and Power (CHP Systems based on Economic Risk using Minimax Regret Criterion

Directory of Open Access Journals (Sweden)

Ling Wen Choong

2018-01-01

Full Text Available It is a great challenge to identify optimum technologies for CHP systems that utilise biomass and convert it into heat and power. In this respect, industry decision makers are lacking in confidence to invest in biomass CHP due to economic risk from varying energy demand. This research work presents a linear programming systematic framework to design biomass CHP system based on potential loss of profit due to varying energy demand. Minimax Regret Criterion (MRC approach was used to assess maximum regret between selections of the given biomass CHP design based on energy demand. Based on this, the model determined an optimal biomass CHP design with minimum regret in economic opportunity. As Feed-in Tariff (FiT rates affects the revenue of the CHP plant, sensitivity analysis was then performed on FiT rates on the selection of biomass CHP design. Besides, design analysis on the trend of the optimum design selected by model was conducted. To demonstrate the proposed framework in this research, a case study was solved using the proposed approach. The case study focused on designing a biomass CHP system for a palm oil mill (POM due to large energy potential of oil palm biomass in Malaysia.

Network Capacity Assessment of CHP-based Distributed Generation on Urban Energy Distribution Networks

Science.gov (United States)

Zhang, Xianjun

The combined heat and power (CHP)-based distributed generation (DG) or dis-tributed energy resources (DERs) are mature options available in the present energy market, considered to be an effective solution to promote energy efficiency. In the urban environment, the electricity, water and natural gas distribution networks are becoming increasingly interconnected with the growing penetration of the CHP-based DG. Subsequently, this emerging interdependence leads to new topics meriting serious consideration: how much of the CHP-based DG can be accommodated and where to locate these DERs, and given preexisting constraints, how to quantify the mutual impacts on operation performances between these urban energy distribution networks and the CHP-based DG. The early research work was conducted to investigate the feasibility and design methods for one residential microgrid system based on existing electricity, water and gas infrastructures of a residential community, mainly focusing on the economic planning. However, this proposed design method cannot determine the optimal DG sizing and siting for a larger test bed with the given information of energy infrastructures. In this context, a more systematic as well as generalized approach should be developed to solve these problems. In the later study, the model architecture that integrates urban electricity, water and gas distribution networks, and the CHP-based DG system was developed. The proposed approach addressed the challenge of identifying the optimal sizing and siting of the CHP-based DG on these urban energy networks and the mutual impacts on operation performances were also quantified. For this study, the overall objective is to maximize the electrical output and recovered thermal output of the CHP-based DG units. The electricity, gas, and water system models were developed individually and coupled by the developed CHP-based DG system model. The resultant integrated system model is used to constrain the DG's electrical

An updated assessment of the prospects for fuel cells in stationary power and CHP. An information paper

Energy Technology Data Exchange (ETDEWEB)

Sanderson, T.K. [Future Energy Solutions, Harwell (United Kingdom)

2005-07-01

This report presents updated conclusions of the Department of Trade and Industry's research and development programme to assess the commercial prospects for advanced fuel cells in stationary power and combined heat and power (CHP) systems. The programme has focussed on low temperature solid polymer fuel cells (SPFCs) for transport and combined heat and power (CHP)/distributed power and high temperature solid oxide fuel cells (SOFCs) for CHP/distributed power. As well as assessing the prospects for SPFCs and SOFCs in stationary power and CHP applications, the report examines those for molten carbonate fuel cells (MCFCs) and phosphoric acid fuel cells (PAFCs). The report provides an assessment of the status of technology development for these different types of fuel cells in terms of applications to stationary power and CHP, and offers estimates of market potential for SOFCs in CHP markets, SPFCs in CHP markets and SOFCs in distributed power generation markets. Both large SPFC and SOFC CHP systems require further development to deliver the necessary cost reductions in materials and manufacturing processes before pre-commercial sales can begin. The routes taken by different manufacturers and their choice of preferred technology are explained. A discussion of the prospects and barriers for fuel cell cars concludes that while cost reduction is a major barrier to the successful commercialisation of fuel cells, there are insufficient data available from operating fuel cells systems (other than PAFC) in stationary power and CHP applications to assess the economic attractiveness of fuel cells compared with existing systems. More field trials are required to confirm energy and environmental performance in such applications and to evaluate operational and economic performance under commercial operating conditions. Such field trials could also provide a focus for the required developments in fuel cells for stationary power/CHP systems.

Modeling work of a small scale gasifier/SOFC CHP system

Energy Technology Data Exchange (ETDEWEB)

Liu, M.; Aravind, P.V.; Qu, Z.; Woudstra, N.; Verkooijen, A.H.M. [Delft University of Technology (Netherlands). Dept. of Mechanical Engineering], Emails: ming.liu@tudelft.nl, p.v.aravind@tudelft.nl, z.qu@tudelft.nl, n.woudstra@tudelft.nl, a. h. m. verkooijen@tudelft.nl; Cobas, V.R.M. [Federal University of Itajuba (UNIFEI), Pinheirinhos, MG (Brazil). Dept. of Mechanical Engineering], E-mail: vlad@unifei.edu.br

2009-07-01

For a highly efficient biomass gasification/Solid Oxide Fuel Cell (SOFC) Combined Heat and Power (CHP) generation system, the gasifier, the accompanying gas cleaning technologies and the CHP unit must be carefully designed as an integrated unit. This paper describes such a system involving a two-stage fixed-bed down draft gasifier, a SOFC CHP unit and a gas cleaning system. A gas cleaning system with both low temperature and high temperature sections is proposed for coupling the gasifier and the SOFC. Thermodynamic modeling was carried out for the gasifier/SOFC system with the proposed gas cleaning system. The net AC electrical efficiency of this system is around 30% and the overall system efficiency is around 60%. This paper also describes various exergy losses in the system and the future plans for integrated gasifier-GCU-SOFC experiments from which the results will be used to validate the modeling results of this system. (author)

Small scale CHP: Alternative integration forms in the Danish energy system

International Nuclear Information System (INIS)

Boeg, Rasmus; Gatautis, Ramunas; Engberg Pedersen, Thomas; Schmidt, Rune; Ravn, Hans F.

2003-01-01

In Denmark, introduction of small scale combined heat and power (CHP) plants were part of the energy policy during the 1990's. Thus, the installed electricity capacity on this type of units multiplied approximately ten times during this decade, to constitute more than 2000 MW in 2000, or around 20% of total installed electricity capacity. The motivation for this development was mainly energy savings due to the relatively high thermal efficiency in combined production, and the associated reduction of emissions. The remuneration for the electricity delivered to the electrical network was in part based on a feed in tariff. The construction of the tariff reflected estimated benefits to the electrical system. With the liberalisation of the electricity markets this arrangement has been questioned, and it has been suggested that the differentiated payment to local CHP should be based on electricity market prising. For Denmark this would imply that the local CHP should trade the electricity on the Nordpool electricity spot market. This paper analyses parts of these two alternative ways of economic arrangements in relation to small scale CHP. First it describes the development and status till now. Then it analyses the production patterns and associated economic consequences of a change from the tariff based system to a market system. (BA)

Combustion Turbine CHP System for Food Processing Industry

Energy Technology Data Exchange (ETDEWEB)

None

2010-10-01

This factsheet describes a combined heat and power (CHP) demonstration project that reduces the energy costs and environmental impact of a plant while easing congestion on the constrained Northeast power grid.

Development of Next Generation micro-CHP System

DEFF Research Database (Denmark)

Arsalis, Alexandros

Novel proposals for the modeling and operation of a micro-CHP (combined-heat-andpower) residential system based on HT-PEMFC (High Temperature-Proton Exchange Membrane Fuel Cell) technology are described and analyzed to investigate the technical feasibility of such systems. The proposed systems must...

Optimal design of CHP-based microgrids: Multiobjective optimisation and life cycle assessment

International Nuclear Information System (INIS)

Zhang, Di; Evangelisti, Sara; Lettieri, Paola; Papageorgiou, Lazaros G.

2015-01-01

As an alternative to current centralised energy generation systems, microgrids are adopted to provide local energy with lower energy expenses and gas emissions by utilising distributed energy resources (DER). Several micro combined heat and power technologies have been developed recently for applications at domestic scale. The optimal design of DERs within CHP-based microgrids plays an important role in promoting the penetration of microgrid systems. In this work, the optimal design of microgrids with CHP units is addressed by coupling environmental and economic sustainability in a multi-objective optimisation model which integrates the results of a life cycle assessment of the microgrids investigated. The results show that the installation of multiple CHP technologies has a lower cost with higher environmental saving compared with the case when only a single technology is installed in each site, meaning that the microgrid works in a more efficient way when multiple technologies are selected. In general, proton exchange membrane (PEM) fuel cells are chosen as the basic CHP technology for most solutions, which offers lower environmental impacts at low cost. However, internal combustions engines (ICE) and Stirling engines (SE) are preferred if the heat demand is high. - Highlights: • Optimal design of microgrids is addressed by coupling environmental and economic aspects. • An MILP model is formulated based on the ε-constraint method. • The model selects a combination of CHP technologies with different technical characteristics for optimum scenarios. • The global warming potential (GWP) and the acidification potential (AP) are determined. • The output of LCA is used as an input for the optimisation model

A family of serine proteases of Clavibacter michiganensis subsp. michiganensis: chpC plays a role in colonization of the host plant tomato.

Science.gov (United States)

Stork, Ines; Gartemann, Karl-Heinz; Burger, Annette; Eichenlaub, Rudolf

2008-09-01

Genes for seven putative serine proteases (ChpA-ChpG) belonging to the trypsin subfamily and homologous to the virulence factor pat-1 were identified on the chromosome of Clavibacter michiganensis subsp. michiganensis (Cmm) NCPPB382. All proteases have signal peptides indicating export of these proteins. Their putative function is suggested by two motifs and an aspartate residue typical for serine proteases. Furthermore, six cysteine residues are located at conserved positions. The genes are clustered in a chromosomal region of about 50 kb with a significantly lower G + C content than common for Cmm. The genes chpA, chpB and chpD are pseudogenes as they contain frame shifts and/or in-frame stop codons. The genes chpC and chpG were inactivated by the insertion of an antibiotic resistance cassette. The chpG mutant was not impaired in virulence. However, in planta the titre of the chpC mutant was drastically reduced and only weak disease symptoms were observed. Complementation of the chpC mutant by the wild-type allele restored full virulence. ChpC is the first chromosomal gene of Cmm identified so far that affects the interaction of the pathogen with the host plant.

ChpK and MazF of the toxin-antitoxin modules are involved in the virulence of Leptospira interrogans during infection.

Science.gov (United States)

Komi, Komi Koukoura; Ge, Yu-Mei; Xin, Xiao-Yang; Ojcius, David M; Sun, Dexter; Hu, Wei-Lin; Zhao, Xin; Lin, Xu'ai; Yan, Jie

2015-01-01

Pathogenic Leptospira species are the causative agents of leptospirosis, a global zoonotic infectious disease. Toxin-antitoxin (TA) modules have been confirmed as stress-response elements that induce prokaryotic and eukaryotic cell-growth arrest or death, but their role in the virulence of Leptospira has not been reported. Here, we confirmed that all the tested leptospiral strains had the chpIK and mazEF TA modules with highly-conserved sequences. The transcription and expression of the chpI, chpK, mazE, and mazF genes of Leptospira interrogans strain Lai were significantly increased during infection of phorbol 12-myristate 13-acetate-induced human THP-1 macrophages. The toxic ChpK and MazF but not the antitoxic ChpI and MazE proteins were detectable in the cytoplasmic fraction of leptospire-infected THP-1 cells, indicating the external secretion of ChpK and MazF during infection. Transfection of the chpK or mazF gene caused decreased viability and necrosis in THP-1 cells, whereas the chpI or mazE gene transfection did not affect the viability of THP-1 cells but blocked the ChpK or MazF-induced toxicity. Deletion of the chpK or mazF gene also decreased the late-apoptotic and/or necrotic ratios of THP-1 cells at the late stages of infection. The recombinant protein MazF (rMazF) cleaved the RNAs but not the DNAs from Leptospira and THP-1 cells, and this RNA cleavage was blocked by rMazE. However, the rChpK had no RNA or DNA-degrading activity. All these findings indicate that the ChpK and MazF proteins in TA modules are involved in the virulence of L. interrogans during infection. Copyright © 2014 Institut Pasteur. Published by Elsevier Masson SAS. All rights reserved.

Modeling and simulation of a residential micro-CHP system based on HT-PEMFC technology

DEFF Research Database (Denmark)

Arsalis, Alexandros; Nielsen, Mads Pagh; Kær, Søren Knudsen

2009-01-01

Combined-heat-and-power (CHP) technology is a well known and proved method to produce simultaneously power and heat at high efficiencies. This can be further improved by the introduction of a novel micro-CHP residential system based on High Temperature-Proton Exchange Membrane Fuel Cell (HT-PEMFC......). The HT-PEMFC (based on PBI-membrane technology) operates at temperatures near 200oC, and this can be an ideal match for cogeneration residential systems. The proposed system provides electric power, hot water, and space heating for a typical household (1-5 kWe, 5-10 kWth). The micro-CHP system...

A Study of a Diesel Engine Based Micro-CHP System

Energy Technology Data Exchange (ETDEWEB)

Krishna, C.R.; Andrews, J.; Tutu, N.; Butcher, T.

2010-08-31

This project, funded by New York State Energy Research and Development Agency (NYSERDA), investigated the potential for an oil-fired combined heat and power system (micro-CHP system) for potential use in residences that use oil to heat their homes. Obviously, this requires the power source to be one that uses heating oil (diesel). The work consisted of an experimental study using a diesel engine and an analytical study that examined potential energy savings and benefits of micro-CHP systems for 'typical' locations in New York State. A search for a small diesel engine disclosed that no such engines were manufactured in the U.S. A single cylinder engine manufactured in Germany driving an electric generator was purchased for the experimental work. The engine was tested using on-road diesel fuel (15 ppm sulfur), and biodiesel blends. One of the main objectives was to demonstrate the possibility of operation in the so-called HCCI (Homogeneous Charge Compression Ignition) mode. The HCCI mode of operation of engines is being explored as a way to reduce the emission of smoke, and NOx significantly without exhaust treatment. This is being done primarily in the context of engines used in transportation applications. However, it is felt that in a micro-CHP application using a single cylinder engine, such an approach would confer those emission benefits and would be much easier to implement. This was demonstrated successfully by injecting the fuel into the engine air intake using a heated atomizer made by Econox Technologies LLC to promote significant vaporization before entering the cylinder. Efficiency and emission measurements were made under different electrical loads provided by two space heaters connected to the generator in normal and HCCI modes of operation. The goals of the analytical work were to characterize, from the published literature, the prime-movers for micro-CHP applications, quantify parametrically the expected energy savings of using micro-CHP

Increased power to heat ratio of small scale CHP plants using biomass fuels and natural gas

International Nuclear Information System (INIS)

Savola, Tuula; Fogelholm, Carl-Johan

2006-01-01

In this paper, we present a systematic study of process changes for increased power production in 1-20 MW e combined heat and power (CHP) plants. The changes are simulated, and their economic feasibility evaluated by using existing small scale CHP case plants. Increasing power production in decentralised CHP plants that operate according to a certain heat demand could reduce the fuel consumption and CO 2 emissions per power unit produced and improve the feasibility of CHP plant investments. The CHP plant process changes were simulated under design and off design conditions and an analysis of power and heat production, investment costs and CO 2 emissions was performed over the whole annual heat demand. The results show that using biomass fuels, there are profitable possibilities to increase the current power to heat ratios, 0.23-0.48, of the small scale CHP plants up to 0.26-0.56, depending on the size of the plant. The profitable changes were a two stage district heat exchanger and the addition of a steam reheater and a feed water preheater. If natural gas is used as an additional fuel, the power to heat ratio may be increased up to 0.35-0.65 by integrating a gas engine into the process. If the CO 2 savings from the changes are also taken into account, the economic feasibility of the changes increases. The results of this work offer useful performance simulation and investment cost knowledge for the development of more efficient and economically feasible small scale CHP processes

CHP in Switzerland from 1990 to 1998. Thermal power generation including combined heat and power

International Nuclear Information System (INIS)

Kaufmann, U.

1999-01-01

The results of a study on thermal power generation in Switzerland show that combined heat and power (CHP) systems have grown rapidly. Statistics are presented on the development of CHP-based power and also on thermal power stations without waste heat usage. Figures are given for gas and steam turbine installations, combined gas and steam turbine stations and motor-driven CHP units. Power production is categorised, separating small and large (over 1 Megawatt electrical) power generation facilities. On-site, distributed power generation at consumers' premises and the geographical distribution of plant is described

Reactive power control with CHP plants - A demonstration

DEFF Research Database (Denmark)

Nyeng, Preben; Østergaard, Jacob; Andersen, Claus A.

2010-01-01

power rating of 7.3 MW on two synchronous generators. A closed-loop control is implemented, that remote controls the CHP plant to achieve a certain reactive power flow in a near-by substation. The solution communicates with the grid operator’s existing SCADA system to obtain measurements from...... lines to underground cables has changed the reactive power balance, and third, the TSO has introduced restrictions in the allowed exchange of reactive power between the transmission system and distribution grids (known as the Mvar-arrangement). The demonstration includes a CHP plant with an electric......In this project the potential for ancillary services provision by distributed energy resources is investigated. Specifically, the provision of reactive power control by combined heat and power plants is examined, and the application of the new standard for DER communication systems, IEC 61850...

New CHP plant for a rubber products manufacturer

International Nuclear Information System (INIS)

Vila, R.; Martí, C.

2016-01-01

At the end of 2014 the company Industrias de Hule Galgo decided to undertake the installation project of an efficient CHP plant for its production plant, with the aim of bringing down energy costs and improving the company’s competitive position in the market. The new plant has already started its first operational phase. The project has comprised the installation of a single cycle with gas-powered gensets providing a total electrical capacity of 6.6 MW. This provides the necessary thermal oil for the production plant; covers 100% of the electrical power consumed by the industrial complex; and also generates cooling water, giving improved production capacity by supercooling the extrusion system. To execute these works, Industrias de Hule Galgo contracted the services of engineering company AESA to provide the engineering, procurement and construction of the CHP plant. (Author)

The Pseudomonas aeruginosa Chp Chemosensory System Regulates Intracellular cAMP Levels by Modulating Adenylate Cyclase Activity

Science.gov (United States)

Fulcher, Nanette B.; Holliday, Phillip M.; Klem, Erich; Cann, Martin J.; Wolfgang, Matthew C.

2010-01-01

Summary Multiple virulence systems in the opportunistic pathogen Pseudomonas aeruginosa are regulated by the second messenger signaling molecule adenosine 3’, 5’-cyclic monophosphate (cAMP). Production of cAMP by the putative adenylate cyclase enzyme CyaB represents a critical control point for virulence gene regulation. To identify regulators of CyaB, we screened a transposon insertion library for mutants with reduced intracellular cAMP. The majority of insertions resulting in reduced cAMP mapped to the Chp gene cluster encoding a putative chemotaxis-like chemosensory system. Further genetic analysis of the Chp system revealed that it has both positive and negative effects on intracellular cAMP and that it regulates cAMP levels by modulating CyaB activity. The Chp system was previously implicated in the production and function of type IV pili (TFP). Given that cAMP and the cAMP-dependent transcriptional regulator Vfr control TFP biogenesis gene expression, we explored the relationship between cAMP, the Chp system and TFP regulation. We discovered that the Chp system controls TFP production through modulation of cAMP while control of TFP-dependent twitching motility is cAMP-independent. Overall, our data define a novel function for a chemotaxis-like system in controlling cAMP production and establish a regulatory link between the Chp system, TFP and other cAMP-dependent virulence systems. PMID:20345659

Changes of the thermodynamic parameters in failure conditions of the micro-CHP cycle

Science.gov (United States)

Matysko, Robert; Mikielewicz, Jarosław; Ihnatowicz, Eugeniusz

2014-03-01

The paper presents the calculations for the failure conditions of the ORC (organic Rankine cycle) cycle in the electrical power system. It analyses the possible reasons of breakdown, such as the electrical power loss or the automatic safety valve failure. The micro-CHP (combined heat and power) system should have maintenance-free configuration, which means that the user does not have to be acquainted with all the details of the ORC system operation. However, the system should always be equipped with the safety control systems allowing for the immediate turn off of the ORC cycle in case of any failure. In case of emergency, the control system should take over the safety tasks and protect the micro-CHP system from damaging. Although, the control systems are able to respond quickly to the CHP system equipped with the inertial systems, the negative effects of failure are unavoidable and always remain for some time. Moreover, the paper presents the results of calculations determining the inertia for the micro-CHP system of the circulating ORC pump, heat removal pump (cooling condenser) and the heat supply pump in failure conditions.

Changes of the thermodynamic parameters in failure conditions of the micro-CHP cycle

Directory of Open Access Journals (Sweden)

Matysko Robert

2014-03-01

Full Text Available The paper presents the calculations for the failure conditions of the ORC (organic Rankine cycle cycle in the electrical power system. It analyses the possible reasons of breakdown, such as the electrical power loss or the automatic safety valve failure. The micro-CHP (combined heat and power system should have maintenance-free configuration, which means that the user does not have to be acquainted with all the details of the ORC system operation. However, the system should always be equipped with the safety control systems allowing for the immediate turn off of the ORC cycle in case of any failure. In case of emergency, the control system should take over the safety tasks and protect the micro-CHP system from damaging. Although, the control systems are able to respond quickly to the CHP system equipped with the inertial systems, the negative effects of failure are unavoidable and always remain for some time. Moreover, the paper presents the results of calculations determining the inertia for the micro-CHP system of the circulating ORC pump, heat removal pump (cooling condenser and the heat supply pump in failure conditions.

Utilization of straw in district heating and CHP plants

International Nuclear Information System (INIS)

Nikolaisen, L.

1993-01-01

In Denmark 64 straw-fired district heating plants and 6 decentral CHP plants have been built since 1980 which are completely or partly straw-fired. The annual straw consumption in the district heating plants is 275,000 tons and in the decentral plants about 200,000 tons. The size of the district heating plants amounts to 0.5 MW - 10 MW and that of the CHP plants to 7 MW - 67 MW heat flow rate. Either whole bales or cut/scarified straw is used for firing. Hesston bales of about 450 kg control the market. The Centre of Biomass Technology is an activity supported 100 % by the Danish Energy Agency with the purpose of increasing the use of straw and wood in the energy supply (orig.)

Environmental sustainability analysis of UK whole-wheat bioethanol and CHP systems

International Nuclear Information System (INIS)

Martinez-Hernandez, Elias; Ibrahim, Muhammad H.; Leach, Matthew; Sinclair, Phillip; Campbell, Grant M.; Sadhukhan, Jhuma

2013-01-01

The UK whole-wheat bioethanol and straw and DDGS-based combined heat and power (CHP) generation systems were assessed for environmental sustainability using a range of impact categories or characterisations (IC): cumulative primary fossil energy (CPE), land use, life cycle global warming potential over 100 years (GWP 100 ), acidification potential (AP), eutrophication potential (EP) and abiotic resources use (ARU). The European Union (EU) Renewable Energy Directive's target of greenhouse gas (GHG) emission saving of 60% in comparison to an equivalent fossil-based system by 2020 seems to be very challenging for stand-alone wheat bioethanol system. However, the whole-wheat integrated system, wherein the CHP from the excess straw grown in the same season and from the same land is utilised in the wheat bioethanol plant, can be demonstrated for potential sustainability improvement, achieving 85% emission reduction and 97% CPE saving compared to reference fossil systems. The net bioenergy from this system and from 172,370 ha of grade 3 land is 12.1 PJ y −1 providing land to energy yield of 70 GJ ha −1 y −1 . The use of DDGS as an animal feed replacing soy meal incurs environmental emission credit, whilst its use in heat or CHP generation saves CPE. The hot spots in whole system identified under each impact category are as follows: bioethanol plant and wheat cultivation for CPE (50% and 48%), as well as for ARU (46% and 52%). EP and GWP 100 are distributed among wheat cultivation (49% and 37%), CHP plant (26% and 30%) and bioethanol plant (25%, and 33%), respectively. -- Highlights: ► UK whole-wheat energy system can achieve 85% GHG emission reduction. ► UK whole-wheat energy system can achieve 97% primary energy saving. ► The land to energy yield of the UK whole-wheat system is 70 GJ ha −1 y −1 . ► Fertiliser production is the hotspot. ► DDGS and straw-based CHP system integration to wheat bioethanol is feasible

Elimination of restraints on the propagation of combined heat and power (CHP) generation systems in Switzerland

International Nuclear Information System (INIS)

Rieder, S.; Landis, F.; Lienhard, A.; Marti Locher, F.; Krummenacher, S.

2009-04-01

This report for the Swiss Federal Office of Energy (SFOE) discusses the results of study initiated by the SFOE that was to investigate the reasons for the low level of proliferation of CHP technology in Switzerland. The two main questions asked - which factors inhibit the use of CHP in particular application areas and which energy-policy measures can remove such obstacles - are discussed. The use of CHP in various areas of application from waste incineration plants through to units used in residential buildings is analysed and commented on. Recommendations on measures that can be taken to enhance the use of CHP are discussed. Three strategy variants available to the public services area are presented and discussed. It is noted that a consensus between players in the technical and political areas is necessary

Techno, Economic and Environmental Assessment of a Combined Heat and Power (CHP System—A Case Study for a University Campus

Directory of Open Access Journals (Sweden)

Khuram Pervez Amber

2018-05-01

Full Text Available Universities in the United Kingdom that have installed Combined Heat and Power (CHP technology are making good moves towards achieving their CO2 reduction targets. However, CHP may not always be an economical option for a university campus due to numerous factors. Identification of such factors is highly important before making an investment decision. A detailed technical, economic, and environmental feasibility of CHP is, therefore, indispensable. This study aims to undertake a detailed assessment of CHP for a typical university campus and attempts to highlight the significance of such factors. Necessary data and information were collected through site visits, whereas the CHP sizing was performed using the London South Bank University (LSBU CHP model. The results suggest that there is a strong opportunity of installing a 230 kW CHP that will offset grid electricity and boilers thermal supply by 47% and 75%, respectively, and will generate financial and environmental yearly savings of £51k and 395 t/CO2, respectively. A wider spark gap decreases the payback period of the project and vice versa. The capital cost of the project could affect the project’s economics due to factors, such as unavailability of space for CHP, complex existing infrastructure, and unavailability of a gas connection.

CHP expansion strategy in North Rhine-Westphalia. A blueprint for other regions; KWK-Ausbaustrategie in NRW. Eine Blaupause fuer andere Regionen

Energy Technology Data Exchange (ETDEWEB)

Holzapfel, Dominik [EnergieAgentur.NRW, Duesseldorf (Germany); Schneider, Sabine [EnergieAgentur.NRW, Wuppertal (Germany)

2015-10-01

The North Rhine-Westphalian state government intends to increase the share of combined heat and power (CHP) generation to at least 25 % by 2020. Since 2013, the campaign ''CHP.NRW - Power Meets Heat'' (''KWK.NRW - Strom trifft Waerme'') of the EnergyAgency.NRW, is has been running on behalf of the NRW Climate Protection Ministry, to publicise this technology and to promote its expansion. The campaign accompanies the State Government's CHP Stimulus Programme. The EnergyAgency.NRW has organised companies and research institutions, associations and interest groups under the umbrella of ''CHP.NRW - Power Meets Heat'', aiming at co-ordinated and intensified activities in the field of combined heat and power generation. The target of the initial-project ''roadmap/CHP.NRW'' of the ''Virtual Institute / CHP.NRW'' is to develop a guideline for the application and optimisation of CHP-systems.

Contribution of wind power and CHP to exports from Western Denmark during 2000-2004

International Nuclear Information System (INIS)

Mignard, D.; Harrison, G.P.; Pritchard, C.L.

2007-01-01

The experience of Denmark is used by the United Kingdom's anti-wind lobby to demonstrate that intermittency and inaccuracies in wind forecasting make wind power ineffective and expensive. A further assertion is that most of the power is 'unwanted' since up to 80% of it is exported. Here, available data for Danish energy production for 2000-2004 is used to assess the link between wind generation and exports and test the validity of these claims. Net exports in Western Denmark showed good correlation with wind production. However, they were more significantly correlated with the production from local combined heat and power (CHP) plants. In order to test the 80% export claim, a simple technique was devised to correlate and rank hourly net exports and generation from wind and local CHP. In the case where net exports were primarily attributed to (or blamed on) wind, 44-84% of annual wind production was deemed to be exported, with wind 'causing' 57-79% of net annual exports. For this extreme scenario, the percentage values are in line with those of critics. However, under the opposite extreme scenario in which exports are attributed to local CHP, 77-94% of exports were caused by CHP and only 4-32% of wind production was exported. Overall, this study shows that there is some degree of correlation between net exports and wind power, but that the claim that 80% is exported is unwarranted since it ignores the demonstrably stronger influence of local CHP. (author)

Integrated energy markets and varying degrees of liberalisation: price links, bundled sales and CHP production exemplified by Northern European experiences

International Nuclear Information System (INIS)

Jacobsen, H.K.; Fristrup, P.; Munksgaard, J.

2006-01-01

Liberalisation of energy markets has during the last 20 years been gradually introduced in many countries. The liberalisation has led to concerns regarding the markets' state of competition and fears that market power existence can result in less efficiency gains than what is expected from liberalisation. Concerns have also been raised as to whether specific consumer groups will be affected by limited competition in markets. Much of the concern has been concentrated on the electricity markets, but the development of energy sectors with integration of activities within natural gas, electricity and the oil sector creates the need to examine market power aspects across these markets. This paper examines the concentration trends in the Northern European markets for electricity and natural gas, combined with regional district heating aspects, especially with respect to the situation in Denmark. The situation with natural gas companies supplying to both small-scale CHP and to retail heat customers is discussed, for instance, which changes of regulatory regime for domestic heating customers should be considered when the natural gas market is being liberalised? The interlinked nature of the energy markets is described and examples of impacts from one market with limited competition to other markets with seemingly well-functioning competition are given. The specific case of large CHP production facilities with output on the regulated district heating market and the competitive Nordic electricity market is examined. How much of the fluctuations in price experienced in electricity markets should be reflected in the price of heating supplies? To which degree do the heating customers have to bear the burden of low-electricity market prices? Regulation of liberalised markets is discussed focusing on the interaction between one regulated market and the related energy markets that are liberalised. Existing regulation on the markets are compared to a situation where liberalisation

Integrated energy markets and varying degrees of liberalisation: Price links, bundled sales and CHP production exemplified by Northern European experiences

International Nuclear Information System (INIS)

Klinge Jacobsen, Henrik; Fristrup, Peter; Munksgaard, Jesper

2006-01-01

Liberalisation of energy markets has during the last 20 years been gradually introduced in many countries. The liberalisation has led to concerns regarding the markets' state of competition and fears that market power existence can result in less efficiency gains than what is expected from liberalisation. Concerns have also been raised as to whether specific consumer groups will be affected by limited competition in markets. Much of the concern has been concentrated on the electricity markets, but the development of energy sectors with integration of activities within natural gas, electricity and the oil sector creates the need to examine market power aspects across these markets. This paper examines the concentration trends in the Northern European markets for electricity and natural gas, combined with regional district heating aspects, especially with respect to the situation in Denmark. The situation with natural gas companies supplying to both small-scale CHP and to retail heat customers is discussed, for instance, which changes of regulatory regime for domestic heating customers should be considered when the natural gas market is being liberalised? The interlinked nature of the energy markets is described and examples of impacts from one market with limited competition to other markets with seemingly well-functioning competition are given. The specific case of large CHP production facilities with output on the regulated district heating market and the competitive Nordic electricity market is examined. How much of the fluctuations in price experienced in electricity markets should be reflected in the price of heating supplies? To which degree do the heating customers have to bear the burden of low-electricity market prices? Regulation of liberalised markets is discussed focusing on the interaction between one regulated market and the related energy markets that are liberalised. Existing regulation on the markets are compared to a situation where liberalisation

Ecological assessment of new CHP systems and their combination; Oekologische Bewertung neuer WKK-Systeme und Systemkombinationen - Schlussbericht

Energy Technology Data Exchange (ETDEWEB)

Primas, A.

2007-07-01

This final report for the Swiss Federal Office of Energy (SFOE) reports on new developments in the Combined Heat and Power (CHP) generation area. The objective of this study is an ecological and technical evaluation of various CHP systems and system combinations. These also include suitable combinations with other technologies. Systems for five different temperature levels are quantified according to their environmental impact. Various possible applications are compared with a highly efficient reference system using separate heat and power generation - a combined-cycle plant and a heat pump. For chilled water production a combination of the CHP system with an absorption chiller is investigated. The results of the investigations are presented and commented on. Also, advantageous applications of CHP systems are noted.

Micro scale CHP based on biomass intelligent heat transfer with thermoelectric generators

Energy Technology Data Exchange (ETDEWEB)

Moser, W.; Aigenbauer, S.; Heckmann, M.; Friedl, G. (Austrian Bioenergy Centre GmbH, Wieselburg (Austria)); Hofbauer, H. (Institute of Chemical Engineering, Vienna University of Technology (Austria))

2007-07-01

Pellet burners need auxiliary electrical power to provide CO{sub 2} balanced heat in a comfortable and environment friendly way. The idea is to produce this and some extra electricity within the device in order to save resources and to gain operation reliability and independency. An option for micro scale CHP is the usage of thermoelectric generators (TEGs). They allow direct conversion of heat into electrical power. They have the advantage of a long maintenance free durability and noiseless operation without moving parts or any working fluid. The useful heat remains almost unaffected and can still be used for heating. TEGs are predestined for the use in micro scale CHP based on solid biomass. In this paper the first results from the fully integrated prototype are presented. The performance of the TEG was observed for different loads and operating conditions in order to realise an optimised micro scale CHP based on solid biomass. (orig.)

Research, Development and Demonstration of Micro-CHP System for Residential Applications

Energy Technology Data Exchange (ETDEWEB)

Karl Mayer

2010-03-31

ECR International and its joint venture company, Climate Energy, are at the forefront of the effort to deliver residential-scale combined heat and power (Micro-CHP) products to the USA market. Part of this substantial program is focused on the development of a new class of steam expanders that offers the potential for significantly lower costs for small-scale power generation technology. The heart of this technology is the scroll expander, a machine that has revolutionized the HVAC refrigerant compressor industry in the last 15 years. The liquid injected cogeneration (LIC) technology is at the core of the efforts described in this report, and remains an excellent option for low cost Micro-CHP systems. ECR has demonstrated in several prototype appliances that the concept for LIC can be made into a practical product. The continuing challenge is to identify economical scroll machine designs that will meet the performance and endurance requirements needed for a long life appliance application. This report describes the numerous advances made in this endeavor by ECR International. Several important advances are described in this report. Section 4 describes a marketing and economics study that integrates the technical performance of the LIC system with real-world climatic data and economic analysis to assess the practical impact that different factors have on the economic application of Micro-CHP in residential applications. Advances in the development of a working scroll steam expander are discussed in Section 5. A rigorous analytical assessment of the performance of scroll expanders, including the difficult to characterize impact of pocket to pocket flank leakage, is presented in Section 5.1. This is followed with an FEA study of the thermal and pressure induced deflections that would result from the normal operation of an advanced scroll expander. Section 6 describes the different scroll expanders and test fixtures developed during this effort. Another key technical

Optimal designs of small CHP plants in a market with fluctuating electricity prices

DEFF Research Database (Denmark)

Lund, Henrik; Andersen, A.N.

2005-01-01

The paper presents the Danish experince with methodologies and software tools, which have been used to design investment and operation strategies for almost all small CHP plants in Denmark during the decade of the triple tariff.......The paper presents the Danish experince with methodologies and software tools, which have been used to design investment and operation strategies for almost all small CHP plants in Denmark during the decade of the triple tariff....

Demonstration Stirling Engine based Micro-CHP with ultra-low emissions

Energy Technology Data Exchange (ETDEWEB)

Oeberg, Rolf; Olsson, Fredrik [Carl Bro Energikonsult AB (Sweden); Paalsson, Magnus [Lund Inst. of Technology (Sweden)

2004-03-01

This project has been initiated in order to develop a new type of natural gas fired low emission combustion system for a Stirling engine CHP-unit, and to demonstrate and evaluate the unit with the newly developed combustion system in a CHP application. The Stirling engine technology is well developed, but mostly used in special applications and CHP-applications are scarce. The very low exhaust emissions with the new combustion system would make the Stirling engine very suitable for installation in as a CHP-unit in domestic areas. The Stirling engine used in the project has been a V161 engine produced by Solo Kleinmotoren GmbH in Sindelfingen. The unit has a nominal output of 7,5 kW{sub el} and 20 kW{sub heat} (Hot water). The new combustion system was developed at Lund University and the very strict emission targets that were set up could be achieved, both in the laboratory tests and during the site-testing period. Typical performance and emission figures measured at the site installation are: Generator output (kW): 7,3; Hot water output (kW): 15; El. efficiency (%): 25,4; Total efficiency (%): 77,8; NO{sub x} (ppm): 14; CO (ppm): 112; HC (ppm): < 1; O{sub 2} (%): 8,0; Noise level 1 m from the unit (dBA): 83. The NO{sub x} emissions were reduced with almost 97 % as compared to a standard Stirling combustion system. The emission figures are considerably lower than what could be achieved in an internal combustion engine of similar size with an oxidation catalyst (report SGC 106), while the performance figures are similar for the two technologies. The site testing was carried out during a period of 1,5 year at a site owned by Goeteborg Energi. The site comprises a building structure with workshops, offices etc. covering a ground area of 2,500 m{sup 2}. A gas fired boiler with an output of 250 kW supplies hot water to a local grid for heating and tap water. The annual heat demand is typically 285 MWh and the hot water temperatures are normally 60-80 deg C. The site

Optimal integrated sizing and planning of hubs with midsize/large CHP units considering reliability of supply

International Nuclear Information System (INIS)

Moradi, Saeed; Ghaffarpour, Reza; Ranjbar, Ali Mohammad; Mozaffari, Babak

2017-01-01

Highlights: • New hub planning formulation is proposed to exploit assets of midsize/large CHPs. • Linearization approaches are proposed for two-variable nonlinear CHP fuel function. • Efficient operation of addressed CHPs & hub devices at contingencies are considered. • Reliability-embedded integrated planning & sizing is formulated as one single MILP. • Noticeable results for costs & reliability-embedded planning due to mid/large CHPs. - Abstract: Use of multi-carrier energy systems and the energy hub concept has recently been a widespread trend worldwide. However, most of the related researches specialize in CHP systems with constant electricity/heat ratios and linear operating characteristics. In this paper, integrated energy hub planning and sizing is developed for the energy systems with mid-scale and large-scale CHP units, by taking their wide operating range into consideration. The proposed formulation is aimed at taking the best use of the beneficial degrees of freedom associated with these units for decreasing total costs and increasing reliability. High-accuracy piecewise linearization techniques with approximation errors of about 1% are introduced for the nonlinear two-dimensional CHP input-output function, making it possible to successfully integrate the CHP sizing. Efficient operation of CHP and the hub at contingencies is extracted via a new formulation, which is developed to be incorporated to the planning and sizing problem. Optimal operation, planning, sizing and contingency operation of hub components are integrated and formulated as a single comprehensive MILP problem. Results on a case study with midsize CHPs reveal a 33% reduction in total costs, and it is demonstrated that the proposed formulation ceases the need for additional components/capacities for increasing reliability of supply.

Hybrid Solid Oxide Fuel Cell and Thermoelectric Generator for Maximum Power Output in Micro-CHP Systems

DEFF Research Database (Denmark)

Rosendahl, Lasse; Mortensen, Paw Vestergård; Enkeshafi, Ali A.

2011-01-01

and market segments which are not yet quantified. This paper quantifies a micro-CHP system based on a solid oxide fuel cell (SOFC) and a high-performance TE generator. Based on a 3 kW fuel input, the hybrid SOFC implementation boosts electrical output from 945 W to 1085 W, with 1794 W available for heating...... the electricity production in micro-CHP systems by more than 15%, corresponding to system electrical efficiency increases of some 4 to 5 percentage points. This will make fuel cell-based micro-CHP systems very competitive and profitable and will also open opportunities in a number of other potential business...

Potential for CHP in Africa

International Nuclear Information System (INIS)

Yameogo, Gabriel

2000-01-01

It is suggested that many industries in Africa could benefit from biomass-fired cogeneration so long as the correct structures and learning processes are put in place. The article discusses Africa's energy background and gives figures for generation sources and consumption. A profile of Sudan and its energy needs is presented. It is argued that although some barriers do exist, a move to cogeneration is essential. CHP should be particularly attractive for industries able to use thermal energy for drying, heating and cooling: typical areas would be pharmaceutical and chemical plants, textile factories, cement works and steel mills

Energy use and CO2 emissions of China's industrial sector from a global perspective

International Nuclear Information System (INIS)

Zhou, Sheng; Kyle, G. Page; Yu, Sha; Clarke, Leon E.; Eom, Jiyong; Luckow, Patrick; Chaturvedi, Vaibhav; Zhang, Xiliang; Edmonds, James A.

2013-01-01

The industrial sector has accounted for more than 50% of China's final energy consumption in the past 30 years. Understanding the future emissions and emissions mitigation opportunities depends on proper characterization of the present-day industrial energy use, as well as industrial demand drivers and technological opportunities in the future. Traditionally, however, integrated assessment research has handled the industrial sector of China in a highly aggregate form. In this study, we develop a technologically detailed, service-oriented representation of 11 industrial subsectors in China, and analyze a suite of scenarios of future industrial demand growth. We find that, due to anticipated saturation of China's per-capita demands of basic industrial goods, industrial energy demand and CO 2 emissions approach a plateau between 2030 and 2040, then decrease gradually. Still, without emissions mitigation policies, the industrial sector remains heavily reliant on coal, and therefore emissions-intensive. With carbon prices, we observe some degree of industrial sector electrification, deployment of CCS at large industrial point sources of CO 2 emissions at low carbon prices, an increase in the share of CHP systems at industrial facilities. These technological responses amount to reductions of industrial emissions (including indirect emission from electricity) are of 24% in 2050 and 66% in 2095. - Highlights: • Eleven industrial subsectors in China are detail analyzed from a global perspective. • Industrial energy use and CO 2 emissions will approach a plateau between 2030 and 2040. • Industrial CHP and CCS are truly encouraged by carbon tax. • Some degree of industrial sector electrification are observed by carbon tax

IEA Energy Technology Essentials: Biomass for Power Generation and CHP

Energy Technology Data Exchange (ETDEWEB)

NONE

2007-01-15

The IEA Energy Technology Essentials series offers concise four-page updates on the different technologies for producing, transporting and using energy. Biomass for Power Generation and CHP is the topic covered in this edition.

Evaluation of Combined Heat and Power (CHP Systems Using Fuzzy Shannon Entropy and Fuzzy TOPSIS

Directory of Open Access Journals (Sweden)

Fausto Cavallaro

2016-06-01

Full Text Available Combined heat and power (CHP or cogeneration can play a strategic role in addressing environmental issues and climate change. CHP systems require less fuel than separate heat and power systems in order to produce the same amount of energy saving primary energy, improving the security of the supply. Because less fuel is combusted, greenhouse gas emissions and other air pollutants are reduced. If we are to consider the CHP system as “sustainable”, we must include in its assessment not only energetic performance but also environmental and economic aspects, presenting a multicriteria issue. The purpose of the paper is to apply a fuzzy multicriteria methodology to the assessment of five CHP commercial technologies. Specifically, the combination of the fuzzy Shannon’s entropy and the fuzzy Technique for Order of Preference by Similarity to Ideal Solution (TOPSIS approach will be tested for this purpose. Shannon’s entropy concept, using interval data such as the α-cut, is a particularly suitable technique for assigning weights to criteria—it does not require a decision-making (DM to assign a weight to the criteria. To rank the proposed alternatives, a fuzzy TOPSIS method has been applied. It is based on the principle that the chosen alternative should be as close as possible to the positive ideal solution and be as far as possible from the negative ideal solution. The proposed approach provides a useful technical–scientific decision-making tool that can effectively support, in a consistent and transparent way, the assessment of various CHP technologies from a sustainable point of view.

Micro Cooling, Heating, and Power (Micro-CHP) and Bio-Fuel Center, Mississippi State University

Energy Technology Data Exchange (ETDEWEB)

Louay Chamra

2008-09-26

Initially, most micro-CHP systems will likely be designed as constant-power output or base-load systems. This implies that at some point the power requirement will not be met, or that the requirement will be exceeded. Realistically, both cases will occur within a 24-hour period. For example, in the United States, the base electrical load for the average home is approximately 2 kW while the peak electrical demand is slightly over 4 kW. If a 3 kWe micro- CHP system were installed in this situation, part of the time more energy will be provided than could be used and for a portion of the time more energy will be required than could be provided. Jalalzadeh-Azar [6] investigated this situation and presented a comparison of electrical- and thermal-load-following CHP systems. In his investigation he included in a parametric analysis addressing the influence of the subsystem efficiencies on the total primary energy consumption as well as an economic analysis of these systems. He found that an increase in the efficiencies of the on-site power generation and electrical equipment reduced the total monthly import of electricity. A methodology for calculating performance characteristics of different micro-CHP system components will be introduced in this article. Thermodynamic cycles are used to model each individual prime mover. The prime movers modeled in this article are a spark-ignition internal combustion engine (Otto cycle) and a diesel engine (Diesel cycle). Calculations for heat exchanger, absorption chiller, and boiler modeling are also presented. The individual component models are then linked together to calculate total system performance values. Performance characteristics that will be observed for each system include maximum fuel flow rate, total monthly fuel consumption, and system energy (electrical, thermal, and total) efficiencies. Also, whether or not both the required electrical and thermal loads can sufficiently be accounted for within the system

Grid Interaction of MV-connected CHP-plants during disturbances

NARCIS (Netherlands)

Coster, E.J.; Myrzik, J.M.A.; Kling, W.L.

2009-01-01

Nowadays the amount of distributed generation (DG) units is increasing rapidly. Most dominant are combined heat and power (CHP) plants and wind turbines. At this moment, in most systems, there are no requirements defined for short-circuit behavior of such generators connected to the medium voltage

Validation of a HT-PEMFC stack for CHP applications

Energy Technology Data Exchange (ETDEWEB)

Pasupathi, S.; Ulleberg, Oe. [Western Cape Univ. (South Africa). HySA Systems, SAIAMC; Bujlo, P. [Western Cape Univ. (South Africa). HySA Systems, SAIAMC; Electrotechnical Institute Wroclaw Division (Poland); Scholta, J. [Centre for Solar Energy and Hydrogen Research (ZSW) (Germany)

2010-07-01

Fuel cell systems are very attractive for stationary co-generation applications as they can produce heat and electricity efficiently in a decentralized and environmentally friendly manner. PEMFC stacks operating at temperatures above 120 C, specifically in the range of 140-180 C, are ideal for co-generation purposes. In this study, preliminary results from a HTPEMFC stack designed for CHP applications is presented and discussed. A short, five-cell, HT-PEMFC stack was assembled with Celtec- P-2100 MEAs and validated in terms of electrical performance. The stack was operated with hydrogen and air at 160 C and the utilization curves for anode and cathode were recorded for a wide range of gas utilization at a current density of 0.52 A/cm{sup 2}. The current voltage characteristic was measured at optimal utilization values at 160 C. A 1kW stack is assembled and is currently being validated for its performance under various operating conditions for use in CHP applications. (orig.)

Micro-CHP for self-supply in the housing industry. Profitability and system integration; Mikro-BHKW zur Eigenversorgung in der Wohnungswirtschaft. Wirtschaftlichkeit und Systemintegration

Energy Technology Data Exchange (ETDEWEB)

Hollinger, Raphael; Buettner, Markus; Erge, Thomas; Wille-Haussmann, Bernhard; Wittwer, Christof [Fraunhofer-Institut fuer Solare Energiesysteme ISE, Freiburg (Germany)

2011-07-01

The use of micro-CHP units in multifamily buildings is particularly profitable if the produced electricity - coupled with the thermal energy production - is used directly by the operator or sold locally. To maximize the share of own consumption the use of thermal storages to operate the CHP at times of high electrical demand is necessary. By conducting a field test it is shown that the share of own consumption can be increased by predictive control of CHP with thermal storages. The approach increases the profitability of the CHP operation under today's conditions as well as the system integration of the CHP electricity. (orig.)

Energetic and environmental performance of three biomass upgrading processes integrated with a CHP plant

International Nuclear Information System (INIS)

Kohl, Thomas; Laukkanen, Timo; Järvinen, Mika; Fogelholm, Carl-Johan

2013-01-01

Highlights: ► We simulate CHP-integrated production of wood pellets, torrefied wood pellets and pyrolysis slurry. ► Integration increases operation hours and district heat output by up to 38% and 22%. ► Additionally installed equipment reduces yearly power generation by up to 7%. ► Wood pellet production performs best energetically and environmentally. ► Integrated concepts substantially reduce fuel consumption and CO 2 emissions. - Abstract: In order to react on future expected increased competition on restricted biomass resources, communal combined heat and power (CHP) plants can be integrated with biomass upgrading processes that add valuable products to the portfolio. In this paper, outgoing from a base case, the retrofit integration of production of wood pellets (WPs), torrefied wood pellets (TWPs) and wood fast pyrolysis slurry (PS) with an existing wood-fired CHP plant was simulated. Within the integration concept, free boiler capacity during times of low district heat demands is used to provide energy for the upgrading processes. By detailed part-load modelling, critical process parameters are discussed. With help of a multiperiod model of the heat duration curve, the work further shows the influence of the integration on plant operating hours, electricity production and biomass throughput. Environmental and energetic performance is assessed according to European standard EN 15603 and compared to the base case as well as to stand-alone production in two separate units. The work shows that all three integration options are well possible within the operational limits of the CHP plant. Summarising, this work shows that integration of WP, TWP and PS production from biomass with a CHP plant by increasing the yearly boiler workload leads to improved primary energy efficiency, reduced CO 2 emissions, and, when compared to stand-alone production, also to substantial fuel savings

Anti-diabetic effect of Cyclo-His-Pro (CHP)-enriched yeast ...

African Journals Online (AJOL)

Anti-diabetic effect of Cyclo-His-Pro (CHP)-enriched yeast hydrolysate in ... The present study was designed to investigate the hypoglycemic effects of the daily ... in the area under curve (AUC) value of YH supplemented groups as compared ...

CHP Integrated with Burners for Packaged Boilers

Energy Technology Data Exchange (ETDEWEB)

Castaldini, Carlo; Darby, Eric

2013-09-30

The objective of this project was to engineer, design, fabricate, and field demonstrate a Boiler Burner Energy System Technology (BBEST) that integrates a low-cost, clean burning, gas-fired simple-cycle (unrecuperated) 100 kWe (net) microturbine (SCMT) with a new ultra low-NOx gas-fired burner (ULNB) into one compact Combined Heat and Power (CHP) product that can be retrofit on new and existing industrial and commercial boilers in place of conventional burners. The Scope of Work for this project was segmented into two principal phases: (Phase I) Hardware development, assembly and pre-test and (Phase II) Field installation and demonstration testing. Phase I was divided into five technical tasks (Task 2 to 6). These tasks covered the engineering, design, fabrication, testing and optimization of each key component of the CHP system principally, ULNB, SCMT, assembly BBEST CHP package, and integrated controls. Phase I work culminated with the laboratory testing of the completed BBEST assembly prior to shipment for field installation and demonstration. Phase II consisted of two remaining technical tasks (Task 7 and 8), which focused on the installation, startup, and field verification tests at a pre-selected industrial plant to document performance and attainment of all project objectives. Technical direction and administration was under the management of CMCE, Inc. Altex Technologies Corporation lead the design, assembly and testing of the system. Field demonstration was supported by Leva Energy, the commercialization firm founded by executives at CMCE and Altex. Leva Energy has applied for patent protection on the BBEST process under the trade name of Power Burner and holds the license for the burner currently used in the product. The commercial term Power Burner is used throughout this report to refer to the BBEST technology proposed for this project. The project was co-funded by the California Energy Commission and the Southern California Gas Company (SCG), a

Experimental study on a project with CHP system basing on absorption cycles

International Nuclear Information System (INIS)

Sun, Jian; Fu, Lin; Sun, Fangtian; Zhang, Shigang

2014-01-01

A new heat recovery system for the CHP (combined heating and power) is presented, and HRU (heat recovery unit) and AHE (absorption heat exchanger) are invented to improve the total energy efficiency of the conventional CHP system by more than 20%, which are installed at the thermal power plant and the heating substation separately. The HRU could recover the low grade heat of exhausted steam from the turbine directly, and the AHE could decrease the temperature of back water of primary pipe to a lower temperature than that of secondary pipe without changing the flow rate of secondary pipe. A large demonstration project employing this technology has been built in Datong of China. And experimental results of HRU and AHE are presented to evaluate this system. - Highlights: • The total energy efficiency of CHP could by increased by more than 20%. • Temperature of back water of primary pipe could be lower than that of secondary pipe. • Heating capacity of primary pipe could be increased significantly. • Low grade heat of exhausted steam from turbine could be recovered directly

IVO`s CHP know-how: experience, inventions, patents

Energy Technology Data Exchange (ETDEWEB)

Aeijaelae, M.; Ohtonen, V. [ed.

1997-11-01

IVO can justly claim mastery in the co-generation of district heat and electricity - CHP. As well as looking at the issue from the viewpoint of planners, builders and operators, IVO`s engineers also view power plants through the eyes of the product developer and inventor. This approach has resulted in successful power plant configurations, inventions and patents and visions

Performance and cost results from a DOE Micro-CHP demonstration facility at Mississippi State University

International Nuclear Information System (INIS)

Giffin, Paxton K.

2013-01-01

Highlights: ► We examine the cost and performance results of a Micro-CHP demonstration facility. ► Evaluation includes both summer and winter performance. ► Evaluation in comparison to a conventional HVAC system using grid power. ► Influence of improperly sized equipment. ► Influence of natural gas prices on the viability of CHP projects using that fuel. - Abstract: Cooling, Heating, and Power (CHP) systems have been around for decades, but systems that utilize 20 kW or less, designated as Micro-CHP, are relatively new. A demonstration site has been constructed at Mississippi State University (MSU) to show the advantages of these micro scale systems. This study is designed to evaluate the performance of a Micro-CHP system as opposed to a conventional high-efficiency Heating, Ventilation, and Air Conditioning (HVAC) system that utilizes electrical power from the existing power grid. Raw data was collected for 7 months to present the following results. The combined cycle efficiency from the demonstration site was averaged at 29%. The average combined boiler and engine cost was $1.8 h −1 of operation for heating season and $3.9 h −1 of operation for cooling season. The cooling technology used, an absorption chiller exhibited an average Coefficient of Performance (COP) of 0.27. The conventional high-efficiency system, during cooling season, had a COP of 4.7 with a combined cooling and building cost of $0.2 h −1 of operation. During heating mode, the conventional system had an efficiency of 47% with a fuel and building electrical cost of $0.28 h −1 of operation.

Crystallization and preliminary crystallographic analysis of the human calcineurin homologous protein CHP2 bound to the cytoplasmic region of the Na+/H+ exchanger NHE1

International Nuclear Information System (INIS)

Ben Ammar, Youssef; Takeda, Soichi; Sugawara, Mitsuaki; Miyano, Masashi; Mori, Hidezo; Wakabayashi, Shigeo

2005-01-01

Crystallization of the human CHP2–NHE1 binding domain complex. Calcineurin homologous protein (CHP) is a Ca 2+ -binding protein that directly interacts with and regulates the activity of all plasma-membrane Na + /H + -exchanger (NHE) family members. In contrast to the ubiquitous isoform CHP1, CHP2 is highly expressed in cancer cells. To understand the regulatory mechanism of NHE1 by CHP2, the complex CHP2–NHE1 (amino acids 503–545) has been crystallized by the sitting-drop vapour-diffusion method using PEG 3350 as precipitant. The crystals diffract to 2.7 Å and belong to a tetragonal space group, with unit-cell parameters a = b = 49.96, c = 103.20 Å

Characterization of ultrafine and fine particles from CHP Plants

Energy Technology Data Exchange (ETDEWEB)

2009-08-15

Samples of particles collected at CHP plants in the project 'Survey of emissions from CHP Plants' have been analysed in this project to give information on the morphology and chemical composition of individual particle size classes. The objective of this project was to characterize ultrafine and fine particles emitted to the atmosphere from Danish CHP plants. Nine CHP plants were selected in the Emission Survey Project as being representative for the different types of CHP plants operating in Denmark: 1) Three Waste-to Energy (WTE) plants. 2) Three biomass fired (BM) plants (two straw fired, one wood/saw dust fired). 3) Two gas fired (GF) plants (one natural gas, one landfill gas fired). 4) One gasoil (GO) fired plant. At the WTE and BM plants, various types of emission control systems implemented. The results from these plants represent the composition and size distribution of combustion particles that are emitted from the plants emission control systems. The measured emissions of particles from the waste-to-energy plants WTE1-3 are generally very low. The number and mass concentrations of ultrafine particles (PM{sub 0.1}) were particularly low in the flue gas from WTE2 and WTE3, where bag filters are used for the reduction of particle emissions. The EDX analysis of particles from the WTE plants indicates that the PM{sub 0.1} that penetrates the ECS at WTE can contain high fractions of metals such as Fe, Mn and Cu. The SEM analysis of particles from WTE1-3 showed that the particles were generally porous and irregular in shape. The concentrations of particles in the flue gas from the biomass plants were generally higher than found for the WTE plants. The time series results showed that periodical, high concentration peaks of PM emissions occur from BM1 and BM2. The chemical composition of the particles emitted from the three biomass plants is generally dominated by C, O and S, and to some extend also Fe and Si. A high amount of Cu was found in selected

Multi-Objective Analysis of a CHP Plant Integrated Microgrid in Pakistan

Directory of Open Access Journals (Sweden)

Asad Waqar

2017-10-01

Full Text Available In developing countries like Pakistan, the capacity shortage (CS of electricity is a critical problem. The frequent natural gas (NG outages compel consumers to use electricity to fulfill the thermal loads, which ends up as an increase in electrical load. In this scenario, the authors have proposed the concept of a combined heat & power (CHP plant to be a better option for supplying both electrical and thermal loads simultaneously. A CHP plant-based microgrid comprising a PV array, diesel generators and batteries (operating in grid-connected as well as islanded modes has been simulated using the HOMER Pro software. Different configurations of distributed generators (DGs with/without batteries have been evaluated considering multiple objectives. The multiple objectives include the minimization of the total net present cost (TNPC, cost of generated energy (COE and the annual greenhouse gas (GHG emissions, as well as the maximization of annual waste heat recovery (WHR of thermal units and annual grid sales (GS. These objectives are subject to the constraints of power balance, battery operation within state of charge (SOC limits, generator operation within capacity limits and zero capacity shortage. The simulations have been performed on six cities including Islamabad, Lahore, Karachi, Peshawar, Quetta and Gilgit. The simulation results have been analyzed to find the most optimal city for the CHP plant integrated microgrid.

Economic, energy and GHG emissions performance evaluation of a WhisperGen Mk IV Stirling engine μ-CHP unit in a domestic dwelling

International Nuclear Information System (INIS)

Conroy, G.; Duffy, A.; Ayompe, L.M.

2014-01-01

Highlights: • The performance of a Stirling engine MK IV micro-CHP unit was evaluated in a domestic dwelling in Ireland. • The performance of the micro-CHP was compare to that of a condensing gas boiler. • The micro-CHP unit resulted in an annual cost saving of €180 compared to the condensing gas boiler. • Electricity imported from the grid decreased by 20.8% while CO 2 emissions decreased by 16.1%. • The micro-CHP unit used 2889 kW h of gas more than the condensing gas boiler during one year of operation. - Abstract: This paper presents an assessment of the energy, economic and greenhouse gas emissions performances of a WhisperGen Mk IV Stirling engine μ-CHP unit for use in a conventional house in the Republic of Ireland. The energy performance data used in this study was obtained from a field trial carried out in Belfast, Northern Ireland during the period June 2004–July 2005 by Northern Ireland Electricity and Phoenix Gas working in collaboration with Whispertech UK. A comparative performance analysis between the μ-CHP unit and a condensing gas boiler revealed that the μ-CHP unit resulted in an annual cost saving of €180 with an incremental simple payback period of 13.8 years when compared to a condensing gas boiler. Electricity imported from the grid decreased by 20.8% while CO 2 emissions decreased by 16.1%. The μ-CHP unit used 2889 kW h of gas more than the condensing gas boiler

Combined Heat and Power (CHP) as a Compliance Option under the Clean Power Plan: A Template and Policy Options for State Regulators

Energy Technology Data Exchange (ETDEWEB)

None

2015-07-30

Combined Heat and Power (CHP) is an important option for states to consider in developing strategies to meet their emission targets under the US Environmental Protection Agency's Clean Power Plan. This Template is designed to highlight key issues that states should consider when evaluating whether CHP could be a meaningful component of their compliance plans. It demonstrates that CHP can be a valuable approach for reducing emissions and helping states achieve their targets. While the report does not endorse any particular approach for any state, and actual plans will vary dependent upon state-specific factors and determinations, it provides tools and resources that states can use to begin the process, and underscores the opportunity CHP represents for many states. . By producing both heat and electricity from a single fuel source, CHP offers significant energy savings and carbon emissions benefits over the separate generation of heat and power, with a typical unit producing electricity with half the emissions of conventional generation. These efficiency gains translate to economic savings and enhanced competitiveness for CHP hosts, and emissions reductions for the state, along with helping to lower electric bills; and creating jobs in the design, construction, installation and maintenance of equipment. In 2015, CHP represents 8 percent of electric capacity in the United States and provides 12 percent of total power generation. Projects already exist in all 50 states, but significant technical and economic potential remains. CHP offers a tested way for states to achieve their emission limits while advancing a host of ancillary benefits.

EPA's Air Quality Rules for Reciprocating Internal Combustion Engines (RICE) and their Application to CHP (Webinar) – June 24, 2014

Science.gov (United States)

This webinar discusses the effect of EPA's air quality regulations on CHP facilities and stationary RICE, and describes how CHP systems can comply with air quality regulations by using stationary RICE.

Balmorel: A model for analyses of the electricity and CHP markets in the Baltic Sea Region. Appendices

International Nuclear Information System (INIS)

Ravn, H.F.; Munksgaard, J.; Ramskov, J.; Grohnheit, P.E.; Larsen, H.V.

2001-03-01

This report describes the motivations behind the development of the Balmorel model as well as the model itself. The purpose of the Balmorel project is to develop a model for analyses of the power and CHP sectors in the Baltic Sea Region. The model is directed towards the analysis of relevant policy questions to the extent that they contain substantial international aspects. The model is developed in response to the trend towards internationalisation in the electricity sector. This trend is seen in increased international trade of electricity, in investment strategies among producers and otherwise. Also environmental considerations and policies are to an increasing extent gaining an international perspective in relation to the greenhouse gasses. Further, the ongoing process of deregulation of the energy sector highlights this and contributes to the need for overview and analysis. A guiding principle behind the construction of the model has been that it may serve as a means of communication in relation to the policy issues that already are or that may become important for the region. Therefore, emphasis has been put on documentation, transparency and flexibility of the model. This is achieved in part by formulating the model in a high level modelling language, and by making the model, including data, available at the internet. Potential users of the Balmorel model include research institutions, consulting companies, energy authorities, transmission system operators and energy companies. (au)

Distributed Control in a Network of Households with microCHP

NARCIS (Netherlands)

Larsen, Gunn; Scherpen, Jacquelien M.A.; van Foreest, Nicolaas

2011-01-01

This is an application of a dynamic price mechanism to distributed optimization of a network of houses which are both producers and consumers of electricity. One possibility for domestic generation is the Micro Combined Heat Power system (µCHP). We use a pricing mechanism based on dual

Economic analysis of a supercritical coal-fired CHP plant integrated with an absorption carbon capture installation

International Nuclear Information System (INIS)

Bartela, Łukasz; Skorek-Osikowska, Anna; Kotowicz, Janusz

2014-01-01

Energy investments in Poland are currently focused on supercritical coal-fired unit technology. It is likely, that in the future, these units are to be integrated with carbon capture and storage (CCS) installations, which enable a significant reduction of greenhouse gas emissions into the atmosphere. A significant share of the energy market in Poland is constituted by coal-fired combined heat and power (CHP) plants. The integration of these units with CCS installation can be economically inefficient. However, the lack of such integration enhances the investment risk due to the possibility of appearing on the market in the near future high prices of emission allowances. The aforementioned factors and additional favorable conditions for the development of cogeneration can cause one to consider investing in large supercritical CHP plants. This paper presents the results of an economic analysis aimed at comparing three cases of CHP plants, one without an integrated CCS installation and two with such installations. The same steam cycle structure for all variants was adopted. The cases of integrated CHP plants differ from each other in the manner in which they recover heat. For the evaluation of the respective solutions, the break-even price of electricity and avoided emission cost were used. - Highlights: • The simulations of operation of CHP plants under changing load have been realized. • For analyzed cases sensitivity analyses of economic indices have been conducted. • Conditions of competitiveness for integration with CCS units have been identified. • Integration can be profitable if prices of allowance will reach high values, exceeding 50 €/MgCO 2 . • Others important factors are the investment costs and operation and maintenance costs

Modeling of non-linear CHP efficiency curves in distributed energy systems

DEFF Research Database (Denmark)

Milan, Christian; Stadler, Michael; Cardoso, Gonçalo

2015-01-01

Distributed energy resources gain an increased importance in commercial and industrial building design. Combined heat and power (CHP) units are considered as one of the key technologies for cost and emission reduction in buildings. In order to make optimal decisions on investment and operation...... for these technologies, detailed system models are needed. These models are often formulated as linear programming problems to keep computational costs and complexity in a reasonable range. However, CHP systems involve variations of the efficiency for large nameplate capacity ranges and in case of part load operation......, which can be even of non-linear nature. Since considering these characteristics would turn the models into non-linear problems, in most cases only constant efficiencies are assumed. This paper proposes possible solutions to address this issue. For a mixed integer linear programming problem two...

Crystallization and preliminary crystallographic analysis of the human calcineurin homologous protein CHP2 bound to the cytoplasmic region of the Na{sup +}/H{sup +} exchanger NHE1

Energy Technology Data Exchange (ETDEWEB)

Ben Ammar, Youssef [Department of Molecular Physiology, National Cardiovascular Center Research Institute, Fujishiro-dai 5-7-1, Suita, Osaka 565-8565 (Japan); Takeda, Soichi [Department of Cardiac Physiology, National Cardiovascular Center Research Institute, Fujishiro-dai 5-7-1, Suita, Osaka 565-8565 (Japan); Sugawara, Mitsuaki; Miyano, Masashi [Structural Biophysics Laboratory, RIKEN Harima Institute at SPring-8, Kouto, Mikazuki, Sayo, Hyogo 679-5148 (Japan); Mori, Hidezo [Department of Cardiac Physiology, National Cardiovascular Center Research Institute, Fujishiro-dai 5-7-1, Suita, Osaka 565-8565 (Japan); Wakabayashi, Shigeo, E-mail: wak@ri.ncvc.go.jp [Department of Molecular Physiology, National Cardiovascular Center Research Institute, Fujishiro-dai 5-7-1, Suita, Osaka 565-8565 (Japan)

2005-10-01

Crystallization of the human CHP2–NHE1 binding domain complex. Calcineurin homologous protein (CHP) is a Ca{sup 2+}-binding protein that directly interacts with and regulates the activity of all plasma-membrane Na{sup +}/H{sup +}-exchanger (NHE) family members. In contrast to the ubiquitous isoform CHP1, CHP2 is highly expressed in cancer cells. To understand the regulatory mechanism of NHE1 by CHP2, the complex CHP2–NHE1 (amino acids 503–545) has been crystallized by the sitting-drop vapour-diffusion method using PEG 3350 as precipitant. The crystals diffract to 2.7 Å and belong to a tetragonal space group, with unit-cell parameters a = b = 49.96, c = 103.20 Å.

Financing CHP Projects at Wastewater Treatment Facilities with Clean Water State Revolving Funds

Science.gov (United States)

This factsheet provides information about CHP at wastewater treatment facilities, including applications, financial challenges, and financial opportunities, such as the Clean Water State Revolving Fund.

Analysis of the impact of Heat-to-Power Ratio for a SOFC-based mCHP system for residential application under different climate regions in Europe

DEFF Research Database (Denmark)

Liso, Vincenzo; Zhao, Yingru; Brandon, Nigel

2011-01-01

In this paper, the ability of a micro combined heat and power (mCHP) system to cover the heat and electricity demand of a single-family residence is investigated. A solid oxide fuel cell based mCHP system coupled with a hot water storage tank is analyzed. The energy profiles of single-family hous......In this paper, the ability of a micro combined heat and power (mCHP) system to cover the heat and electricity demand of a single-family residence is investigated. A solid oxide fuel cell based mCHP system coupled with a hot water storage tank is analyzed. The energy profiles of single...... according to the summer energy demand. The winter energy demand shows a Heat-to-Power Ratio which cannot be covered by the mCHP unit alone. To ensure that the mCHP system meets both the thermal and electrical energy demand over the entire year, an auxiliary boiler and a hot water storage tank need...

Investment in new power generation under uncertainty: Benefits of CHP vs. condensing plants in a copula-based analysis

International Nuclear Information System (INIS)

Westner, Günther; Madlener, Reinhard

2012-01-01

In this paper, we apply a spread-based real options approach to analyze the decision-making problem of an investor who has the choice between an irreversible investment in a condensing power plant without heat utilization and a plant with combined heat-and-power (CHP) generation. Our investigation focuses on large-scale fossil-fueled generation technologies and is based on a stochastic model that uses copula functions to provide the input parameters of the real options model. We define the aggregated annual spread as assessment criteria for our investigation since it contains all relevant volatile input parameters that have an impact on the evaluation of investment decisions. We show that the specific characteristics of CHP plants, such as additional revenues from heat sales, promotion schemes, specific operational features, and a beneficial allocation of CO 2 allowances, have a significant impact on the option value and therefore on the optimal timing for investment. For the two fossil-fueled CHP technologies investigated (combined-cycle gas turbine and steam turbine), we conclude from our analysis that a high share of CHP generation reduces the risk exposure for the investor. The maximal possible CHP generation depends significantly on the local heat demand in the surroundings of the power plant. Considering this, the size of the heat sink available could gain more relevance in the future selection process of sites for new large-scale fossil power plants.

Flue gas condensation in straw fired CHP plants; Roeggaskondensation i halmfyrede kraftvarmeanlaeg

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-06-15

The high price of straw and a general demand for increased use of straw in power and heat production are expected to result in an increased need for efficient fuel utilization. The use of flue gas condensation in straw fired CHP plants can contribute to a higher exploitation of energy, and at the same time open of the possibility of utilization of wet (cheaper) fuels without energy loss. Furthermore flue gas condensation can contribute to the flue gas cleaning process through removal of HCl and SO{sub 2} as well as in particle cleaning in wet cleaning processes. With starting point in a straw fired CHP plant the technical and economic consequences of installation of a flue gas condensation system are investigated. Fuel exploitation and power/heat production distribution is included in the investigation. (BA)

A Stochastic Unit Commitment Model for a Local CHP Plant

DEFF Research Database (Denmark)

Ravn, Hans V.; Riisom, Jannik; Schaumburg-Müller, Camilla

2005-01-01

Local CHP development in Denmark has during the 90’s been characterised by large growth primarily due to government subsidies in the form of feed-in tariffs. In line with the liberalisation process in the EU, Danish local CHPs of a certain size must operate on market terms from 2005. This paper...

Internalisation of external costs in the Polish power generation sector: A partial equilibrium model

International Nuclear Information System (INIS)

Kudelko, Mariusz

2006-01-01

This paper presents a methodical framework, which is the basis for the economic analysis of the mid-term planning of development of the Polish energy system. The description of the partial equilibrium model and its results are demonstrated for different scenarios applied. The model predicts the generation, investment and pricing of mid-term decisions that refer to the Polish electricity and heat markets. The current structure of the Polish energy sector is characterised by interactions between the supply and demand sides of the energy sector. The supply side regards possibilities to deliver fuels from domestic and import sources and their conversion through transformation processes. Public power plants, public CHP plants, industry CHP plants and municipal heat plants represent the main producers of energy in Poland. Demand is characterised by the major energy consumers, i.e. industry and construction, transport, agriculture, trade and services, individual consumers and export. The relationships between the domestic electricity and heat markets are modelled taking into account external costs estimates. The volume and structure of energy production, electricity and heat prices, emissions, external costs and social welfare of different scenarios are presented. Results of the model demonstrate that the internalisation of external costs through the increase in energy prices implies significant improvement in social welfare

Development of a CHP/DH system for the new town of Parand: An opportunity to mitigate global warming in Middle East

International Nuclear Information System (INIS)

Mostafavi Tehrani, S. Saeed; Saffar-Avval, M.; Mansoori, Z.; Behboodi Kalhori, S.; Abbassi, A.; Dabir, B.; Sharif, M.

2013-01-01

As a result of the worldwide concern about global warming, projects that target reduction of greenhouse gas emissions have gained a lot of interest. The idea of this paper is to recover exhaust hot gases of an existing gas turbine power plant to meet dynamic thermal energy requirements of a residential area (the new town of Parand) situated in the suburb of Tehran, and also use the rest of the heat source potential to feed a steam turbine cycle. In close proximity to this town, there are two GT plants: Parand (954 MW e ) and Rudeshur (790 MW e ). For handling the CHP/STC/DH plant, two methods are considered along with thermal load following operation strategy: maximum power generation (MPG) and minimum fuel consumption (MFC). Then, the alternatives are compared in terms of annual PES, CO 2 abatement and NPV. For the best design from environmental viewpoint (Parand CHP-B), PES, CO 2 abatement and NPV are calculated to be 27.31%, 2.56 million tons and 1491 million dollar, respectively. -- Highlights: • To propose a technical and financial methodology to evaluate CHP/DH projects. • To address environmental advantages of CHPs with conventional plants. • To present practical operation strategies to increase benefits of CHP/DH plants. • To report/compare benefits of various CHP/DH alternatives for a case study in Iran. • To conduct a comprehensive energy analysis of proposed CHP/DH design options

TaCHP: a wheat zinc finger protein gene down-regulated by abscisic acid and salinity stress plays a positive role in stress tolerance.

Science.gov (United States)

Li, Cuiling; Lv, Jian; Zhao, Xin; Ai, Xinghui; Zhu, Xinlei; Wang, Mengcheng; Zhao, Shuangyi; Xia, Guangmin

2010-09-01

The plant response to abiotic stresses involves both abscisic acid (ABA)-dependent and ABA-independent signaling pathways. Here we describe TaCHP, a CHP-rich (for cysteine, histidine, and proline rich) zinc finger protein family gene extracted from bread wheat (Triticum aestivum), is differentially expressed during abiotic stress between the salinity-sensitive cultivar Jinan 177 and its tolerant somatic hybrid introgression cultivar Shanrong No.3. TaCHP expressed in the roots of seedlings at the three-leaf stage, and the transcript localized within the cells of the root tip cortex and meristem. TaCHP transcript abundance was higher in Shanrong No.3 than in Jinan 177, but was reduced by the imposition of salinity or drought stress, as well as by the exogenous supply of ABA. When JN17, a salinity hypersensitive wheat cultivar, was engineered to overexpress TaCHP, its performance in the face of salinity stress was improved, and the ectopic expression of TaCHP in Arabidopsis (Arabidopsis thaliana) also improved the ability of salt tolerance. The expression level of a number of stress reporter genes (AtCBF3, AtDREB2A, AtABI2, and AtABI1) was raised in the transgenic lines in the presence of salinity stress, while that of AtMYB15, AtABA2, and AtAAO3 was reduced in its absence. The presence in the upstream region of the TaCHP open reading frame of the cis-elements ABRE, MYBRS, and MYCRS suggests that it is a component of the ABA-dependent and -independent signaling pathways involved in the plant response to abiotic stress. We suggest that TaCHP enhances stress tolerance via the promotion of CBF3 and DREB2A expression.

Optimization of operation for combined heat and power plants - CHP plants - with heat accumulators using a MILP formulation

Energy Technology Data Exchange (ETDEWEB)

Grue, Jeppe; Bach, Inger [Aalborg Univ. (Denmark). Inst. of Energy Technology]. E-mails: jeg@iet.auc.dk; ib@iet.auc.dk

2000-07-01

The power generation system in Denmark is extensively based on small combined heat and power plants (CHP plants), producing both electricity and district heating. This project deals with smaller plants spread throughout the country. Often a heat accumulator is used to enable electricity production, even when the heat demand is low. This system forms a very complex problem, both for sizing, designing and operation of CHP plants. The objective of the work is the development of a tool for optimisation of the operation of CHP plants, and to even considering the design of the plant. The problem is formulated as a MILP-problem. An actual case is being tested, involving CHP producing units to cover the demand. The results from this project show that it is of major importance to consider the operation of the plant in detail already in the design phase. It is of major importance to consider the optimisation of the plant operation, even at the design stage, as it may cause the contribution margin to rise significantly, if the plant is designed on the basis of a de-tailed knowledge of the expected operation. (author)

Emissions from decentralised CHP plants 2007 - Energinet.dk Environmental project no. 07/1882. Project report 5 - Emission factors and emission inventory for decentralised CHP production

Energy Technology Data Exchange (ETDEWEB)

Nielsen, Malene; Nielsen, Ole-Kenneth; Thomsen, M.

2010-06-15

Updated emission factors for decentralised combined heat and power (CHP) plants with a capacity < 25MWe have been estimated based on project emission measurements as well as emission measurements performed in recent years that were collected. The emission factors valid for 2006/2007 have been estimated for the plant technologies: Municipal solid waste (MSW) incineration plants, plants combusting straw or wood, natural gas fuelled reciprocating engines, biogas fuelled engines, natural gas fuelled gas turbines, gas oil fuelled reciprocating engines, gas oil fuelled gas turbines, steam turbines combusting residual oil and reciprocating engines combusting biomass producer gas based on wood. The emission factors for MSW incineration plants are much lower than the emission factors that were estimated for year 2000. The considerable reduction in the emission factors is a result of lower emission limit values in Danish legislation since 2006 that has lead to installation of new and improved flue gas cleaning systems in most MSW incineration plants. For CHP plants combusting wood or straw no major technical improvements have been implemented. The emission factors for natural gas fuelled reciprocating engines have been reduced since year 2000 as a result of technical improvements that have been carried out due to lower emission limit values in Danish legislation. The NO{sub x} emission factor for natural gas fuelled gas turbines has decreased 62 % since year 2000. This is a result of installation of low-NO{sub x} burners in almost all gas turbines that has been necessary to meet new emission limits in Danish legislation. The emission measurements programme included screening of the emissions of HCB, PCB, PCDD/-F and PBDD/-F. Compared to the Danish national emission decentralized CHP plants are major emission sources for CH{sub 4}, NO{sub x}, SO{sub 2}, heavy metals and HCB. (author)

Economic feasibility of CHP facilities fueled by biomass from unused agriculture land

DEFF Research Database (Denmark)

Pfeifer, Antun; Dominkovic, Dominik Franjo; Ćosić, Boris

2016-01-01

In this paper, the energy potential of biomass from growing short rotation coppice on unused agricultural land in the Republic of Croatia is used to investigate the feasibility of Combined Heat and Power (CHP) facilities fueled by such biomass. Large areas of agricultural land that remain unused...... work and is now used to investigate the conditions in which such energy facilities could be feasible. The overall potential of biomass from short rotation coppice cultivated on unused agricultural land in the scenarios with 30% of the area is up to 10PJ/year. The added value of fruit trees pruning...... biomass represents an incentive for the development of fruit production on such agricultural land. Sensitivity analysis was conducted for several parameters: cost of biomass, investment costs in CHP systems and combined change in biomass and technology cost....

Putney Basketville Site Biomass CHP Analysis

Energy Technology Data Exchange (ETDEWEB)

Hunsberger, Randolph [National Renewable Energy Lab. (NREL), Golden, CO (United States); Mosey, Gail [National Renewable Energy Lab. (NREL), Golden, CO (United States)

2013-10-01

The U.S. Environmental Protection Agency (EPA) Office of Solid Waste and Emergency Response Center for Program Analysis developed the RE-Powering America's Land initiative to reuse contaminated sites for renewable energy generation when aligned with the community's vision for the site. The Putney, Vermont, Basketville site, formerly the location of a basket-making facility and a paper mill andwoolen mill, was selected for a feasibility study under the program. Biomass was chosen as the renewable energy resource based on abundant woody-biomass resources available in the area. Biomass combined heat and power (CHP) was selected as the technology due to nearby loads, including Putney Paper and Landmark College.

Operational Strategies for a Portfolio of Wind Farms and CHP Plants in a Two-Price Balancing Market

DEFF Research Database (Denmark)

Hellmers, Anna; Zugno, Marco; Skajaa, Anders

2015-01-01

In this paper we explore the portfolio effect of a system consisting of a Combined Heat and Power (CHP) plant and a wind farm. The goal is to increase the overall profit of the portfolio by reducing imbalances, and consequently their implicit penalty in a two-price balancing market for electricity......-horizon fashion, so that forecasts for heat demand, wind power production and market prices are updated at each iteration. We conclude that the portfolio strategy is the most profitable due to the two-price structure of the balancing market. This encourages producers to handle their imbalances outside the market........ We investigate two different operational strategies, which differ in whether the CHP plant and the wind farm are operated jointly or independently, and we evaluate their economic performance on a real case study based on a CHP-wind system located in the western part of Denmark. We present...

Calorimetric studies and lessons on fires and explosions of a chemical plant producing CHP and DCPO

International Nuclear Information System (INIS)

Hsu, Jing-Ming; Su, Mao-Sheng; Huang, Chiao-Ying; Duh, Yih-Shing

2012-01-01

Highlights: ► We analyzed fire and explosion incidents in a plant producing CHP and DCPO. ► Data from calorimeters reveal causes and phenomena associated with the incidents. ► The credible worst scenario was thermal explosion. ► Incidents may be avoided by implementing DIERS methodology. - Abstract: Cumene hydroperoxide (CHP) has been used in producing phenol, dicumyl peroxide (DCPO) and as an initiator for synthesizing acrylonitrile–butadiene–styrene (ABS) resin by copolymerization in Taiwan. Four incidents of fire and explosion induced by thermal runaway reactions were occurred in a same plant producing CHP, DCPO and bis-(tert-butylperoxy isopropyl) benzene peroxide (BIBP). The fourth fire and explosion occurred in the CHP reactor that resulted in a catastrophic damage in reaction region and even spread throughout storage area. Descriptions on the occurrences of these incidents were assessed by the features of processes, reaction schemes and unexpected side reactions. Calorimetric data on thermokinetics and pressure were used for explaining the practical consequences or which the worst cases encountered in this kind of plant. Acceptable risk associated with emergency relief system design is vital for a plant producing organic peroxide. These basic data for designing an inherently safer plant can be conducted from adiabatic calorimetry. An encouraging deduction has been drawn here, these incidents may be avoided by the implementation of API RP 520, API RP 521, DIERS technology, OSHA 1910.119 and AIChE's CCPS recommended PSM elements.

Optimal Design and Operation of A Syngas-fuelled SOFC Micro-CHP System for Residential Applications in Different Climate Zones in China

DEFF Research Database (Denmark)

Yang, Wenyuan; Liso, Vincenzo; Zhao, Yingru

2013-01-01

heat-to-power load ratio. Therefore, the aim of this study is to investigate the optimal design and operation of a syngas-fuelled SOFC micro-CHP system for small households located in five different climate zones in China. The ability of the micro-CHP to cover the heat and electricity demand of a 70m2...... demand. Numerical simulations are conducted in Matlab environment. System design trade-offs are discussed to determine the optimal match between the energy demand of the household for different climates across China and the energy supply of the micro-CHP during the whole year. Moreover, criteria...

Examination of energy price policies in Iran for optimal configuration of CHP and CCHP systems based on particle swarm optimization algorithm

International Nuclear Information System (INIS)

Tichi, S.G.; Ardehali, M.M.; Nazari, M.E.

2010-01-01

The current subsidized energy prices in Iran are proposed to be gradually eliminated over the next few years. The objective of this study is to examine the effects of current and future energy price policies on optimal configuration of combined heat and power (CHP) and combined cooling, heating, and power (CCHP) systems in Iran, under the conditions of selling and not-selling electricity to utility. The particle swarm optimization algorithm is used for minimizing the cost function for owning and operating various CHP and CCHP systems in an industrial dairy unit. The results show that with the estimated future unsubsidized utility prices, CHP and CCHP systems operating with reciprocating engine prime mover have total costs of 5.6 and $2.9x10 6 over useful life of 20 years, respectively, while both systems have the same capital recovery periods of 1.3 years. However, for the same prime mover and with current subsidized prices, CHP and CCHP systems require 4.9 and 5.2 years for capital recovery, respectively. It is concluded that the current energy price policies hinder the promotion of installing CHP and CCHP systems and, the policy of selling electricity to utility as well as eliminating subsidies are prerequisites to successful widespread utilization of such systems.

Future market relevance of CHP installations with electrical ratings from 1 to 1000 kW; Zukuenftige Marktbedeutung von WKK-Anlagen mit 1 - 1000 kW elektrischer Leistung

Energy Technology Data Exchange (ETDEWEB)

Eicher, H.; Rigassi, R.

2003-12-15

This report for the Swiss Federal Office of Energy (SFOE) discusses the future market relevance of combined heat and power (CHP) installations with electrical ratings from 1 to 1000 kW. Developments over the past ten years are reviewed. Important reductions in the price of motor-driven CHP units and the price of the electrical power produced are noted and commented on. The technical market potential of CHP units and the degree to which this potential has been implemented are commented on. Work done, including CHP implementation in the industrial, commercial and residential areas, is commented on. Future developments both in the technical area as well as in commercial areas are commented on. Micro-gas-turbine based CHP systems are also discussed, as are fuel-cell based systems in both the higher and lower capacity power generation area. The prospects for CHP systems in general in the electricity generation area are discussed

Heat Pumps in CHP Systems

DEFF Research Database (Denmark)

Ommen, Torben Schmidt

that three configurations are particular advantageous, whereas the two remaining configurations result in system performance close to or below what may be expected from an electric heater. One of the three advantageous configurations is required to be positioned at the location of the heat demand, whereas...... the two remaining can be located at positions with availability of high temperature sources by utilising the DH network to distribute the heat. A large amount of operational and economic constraints limit the applicability of HPs operated with natural working fluids, which may be the only feasible choice...... representation allows infeasible production. Using MIP or NLP optimisation, the number of operation hours and the total production of heat from HPs are significantly increased, as the HPs may be used to shave the load patterns of CHP units in significantly constrained energy systems. A MIP energy system model...

Innovative Hybrid CHP systems for high temperature heating plant in existing buildings

NARCIS (Netherlands)

de Santoli, Livio; Lo Basso, Gianluigi; Nastasi, B.; d’Ambrosio Alfano, Francesca R.; Mazzarella and Piercarlo, Livio

2017-01-01

This paper deals with the potential role of new hybrid CHP systems application providing both electricity and heat which are compatible with the building architectural and landscape limitations. In detail, three different plant layout options for high temperature heat production along with the

Combined heat and power in Dutch greenhouses: A case study of technology diffusion

International Nuclear Information System (INIS)

Veen, Reinier A.C. van der; Kasmire, Julia

2015-01-01

This paper presents a case study of the rapid diffusion of combined heat and power (CHP) units through the Dutch greenhouse horticulture sector between 2003 and 2009 in order to gain new insights regarding technology transitions. We present a sectoral diffusion analysis framework, which we apply to identify and examine developments in technical, economic, institutional, cultural and ecological domains that all contributed to an emergent and thorough CHP diffusion in the Dutch greenhouse sector. Five identified key drivers behind the CHP diffusion are the opening of the energy market in 2002, the high spark spread during the transition period, the compatibility of output of a CHP unit with greenhouse demand, the flexibility provided by heat buffers, and the cooperative and competitive greenhouse sector culture. We conclude that policies to stimulate or steer technology diffusion will benefit from an in-depth analysis of domain interactions and company decision-making processes. Such an in-depth analysis makes for well informed and targeted policies that are better able to steer an industrial sector effectively and in a socially desired direction. - Highlights: • We present a sectoral diffusion analysis framework. • We describe the case of the diffusion of cogeneration (CHP) in Dutch greenhouses. • We extract five key drivers of CHP diffusion in the Dutch greenhouse sector. • The case shows how technology diffusion emerges from co-evolutionary mechanisms. • We conclude that a co-evolutionary sectoral analysis will inform innovation policy.

The Significance of a Building’s Energy Consumption Profiles for the Optimum Sizing of a Combined Heat and Power (CHP System—A Case Study for a Student Residence Hall

Directory of Open Access Journals (Sweden)

Khuram Pervez Amber

2018-06-01

Full Text Available University buildings, such as student residence halls with year-round consistent energy demands, offer strong opportunities for Combined Heat and Power (CHP systems. The economic and environmental feasibility of a CHP project is strongly linked with its optimum sizing. This study aims to undertake such an assessment for a CHP system for a student residence hall located in London, the United Kingdom (UK. The study also aims to undertake a sensitivity analysis to investigate the effect of different parameters on the project’s economics. Necessary data are collected via interviews with the University’s Energy Manager. Modeling of the CHP system is performed using the London South Bank University (LSBU, London, the UK CHP model. Results demonstrate that optimum sizing of CHP is crucial for achieving higher economic and environmental benefits and strongly depends on the authenticity of the energy consumption data, based on which the CHP is being sized. Use of incorrect energy data could result in an undersized or oversized CHP system, where an oversized system will result in higher negative results compared to an undersized system. Finally, Monto Carlo statistical analysis shows that electricity price is the significant factor that could affect the project’s economics. With an increasing spark gap, the payback period decreases, and vice versa.

SOFC/TEG hybrid mCHP system. Final report

Energy Technology Data Exchange (ETDEWEB)

2012-03-15

The starting point for this project have been the challenge has been to develop a cost effective solution with long term stability. This is where a focused effort in a strong consortium covering material research, module development and manufacture as well as device design and optimization can make a real difference. In March 2010 the SOFTEG phase II project was initiated and a cooperation organization was established to implement the project as a development and demonstration project involving the staff from all project partners. The project is now completed with excellent and documented outcome. The final results by Alpcon have been demonstration as a TEG-based mCHP system calls CHP Dual Engine Power System, which will be applicable as both a standalone TEG-CHP hybrid system, but also as an auxiliary power unit and power booster for the SOFC system. However the SOFC system cannot cover the household's heat demand alone so it is necessary to combine a SOFC system together with a water heater/boiler system to cover the peak heat demand of a residential house or a complex building. The SOFTEG project partners achieved significant results that mainly can be outlined as following: 1) University of Aarhus has improved the thermal stability of ZnSb by optimizing the concentration of Nano composite material. 2) The grain size and its influence on the sintering process by spark plasma method are investigated by Aarhus University, but further work seems to be necessary. 3) The TE material is going to commercialization by Aarhus University. 4) Aalborg University has prepared simulation tools for complex thermoelectric simulation in non-steady state condition. 5) The new type DCDC interleaved converter using the MPPT system for optimal power tracing is designed, build and tested by Aalborg University in cooperation with Alpcon. This task is included overall system design, control system implementation and power electronic control design. 6) Full scale practical

Optimal design and operation of a syngas-fuelled SOFC micro CHP system for residential applications in different climate zones in China

DEFF Research Database (Denmark)

Yang, Wenyuan; Zhao, Yingru; Liso, Vincenzo

2014-01-01

under difference climate conditions to ensure that it is well matched with the local heat-to-power ratio. The aim of this study is to investigate the optimal design and operation of a syngas-fuelled SOFC micro-CHP system for small households located in five different climate zones in China. The ability...... of the micro-CHP to cover the heat and electricity demand of a 70 m2 single-family apartment with an average number of occupants of 3 is evaluated. A detailed model of the micro-CHP unit coupled with a hot water storage tank and an auxiliary boiler is developed. System design trade-offs are discussed...

Preliminary experimental investigation of a natural gas-fired ORC-based micro-CHP system for residential buildings

International Nuclear Information System (INIS)

Farrokhi, M.; Noie, S.H.; Akbarzadeh, A.A.

2014-01-01

The continual increases in energy demand and greenhouse gas emissions, call for efficient use of energy resources. Decentralized combined heat and power (CHP) technology provides an alternative for the world to meet and solve energy-related problems including energy shortages, energy supply security, emission control and conservation of energy. This paper presents the preliminary results of an experimental investigation of a natural gas-fired micro-CHP system for residential buildings based on an organic Rankine cycle (ORC). Isopentane was used as the ORC working fluid in consideration of several criteria including its environmentally-friendly characteristics. Experiments were conducted to evaluate the performance of the developed system at different heat source temperatures of nominally 85, 80, 75, 70, and 65 °C. The maximum electrical power output of 77.4 W was generated at heating water entry temperature of 84.1 °C, corresponding to net cycle electrical efficiency of 1.66%. Further work will be done with a view to increasing the cycle electrical efficiency by using more efficient components, in particular the expander and generator. - Highlights: •A natural gas-fired ORC-based micro-scale CHP system has been developed and tested. •The good agreement between the mechanical and gross power validates the assumptions. •A vane expander suits a micro-CHP system based on an organic Rankine cycle. •A vane expander does not suit power generation by a Trilateral Flash Cycle (TFC). •Domestic gas-fired ORC systems may reduce reliance on central power stations

Calorimetric studies and lessons on fires and explosions of a chemical plant producing CHP and DCPO

Energy Technology Data Exchange (ETDEWEB)

Hsu, Jing-Ming; Su, Mao-Sheng; Huang, Chiao-Ying [Department of Occupational Safety and Health, Chia Nan University of Pharmacy and Science, Tainan, Taiwan, ROC (China); Duh, Yih-Shing, E-mail: yihshingduh@yahoo.com.tw [Department of Safety, Health and Environmental Engineering, National United University, No. 1 Lien-Da, Miaoli, Taiwan, ROC (China)

2012-05-30

Highlights: Black-Right-Pointing-Pointer We analyzed fire and explosion incidents in a plant producing CHP and DCPO. Black-Right-Pointing-Pointer Data from calorimeters reveal causes and phenomena associated with the incidents. Black-Right-Pointing-Pointer The credible worst scenario was thermal explosion. Black-Right-Pointing-Pointer Incidents may be avoided by implementing DIERS methodology. - Abstract: Cumene hydroperoxide (CHP) has been used in producing phenol, dicumyl peroxide (DCPO) and as an initiator for synthesizing acrylonitrile-butadiene-styrene (ABS) resin by copolymerization in Taiwan. Four incidents of fire and explosion induced by thermal runaway reactions were occurred in a same plant producing CHP, DCPO and bis-(tert-butylperoxy isopropyl) benzene peroxide (BIBP). The fourth fire and explosion occurred in the CHP reactor that resulted in a catastrophic damage in reaction region and even spread throughout storage area. Descriptions on the occurrences of these incidents were assessed by the features of processes, reaction schemes and unexpected side reactions. Calorimetric data on thermokinetics and pressure were used for explaining the practical consequences or which the worst cases encountered in this kind of plant. Acceptable risk associated with emergency relief system design is vital for a plant producing organic peroxide. These basic data for designing an inherently safer plant can be conducted from adiabatic calorimetry. An encouraging deduction has been drawn here, these incidents may be avoided by the implementation of API RP 520, API RP 521, DIERS technology, OSHA 1910.119 and AIChE's CCPS recommended PSM elements.

Energy policy responses to the climate change challenge: The consistency of European CHP, renewables and energy efficiency policies

International Nuclear Information System (INIS)

Grohnheit, P.E.

1999-09-01

This report is Volume 14 of individual reports of the Shared Analysis Project prepared for the European Commission, Directorate General for Energy. The three major objectives of the project were: to design a common framework of energy analysis that aimed to involve all Member States and the experts of industrial research groups (the shared approach to energy analysis); To analyse generic EU-wide issues important for energy policy and for future energy demand and production, putting particular emphasis on world energy market trends, strategic energy policy responses to the Kyoto process, and evaluation of response strategies to increasing energy import dependence and to climate change activities; to carry out quantitative analyses of energy trends and scenarios as an input for discussion. The present volume considers three main issues concerning energy policy responses to the climate change challenge: the penetration of CHP and renewables according to official objectives, focusing on infrastructure and institutions rather than technology; the consistency of promotion of CHP, renewables and energy savings at the same time; consumers' choices and priorities in a liberalised market. The volume describes examples of policies in several Member States for these technologies with emphasis on CHP for both large-scale and small-scale district heating systems. The penetration of CHP technologies is analysed quantitatively using a traditional optimisation model approach for stylised regions with heat markets suitable for CHP and facing a competitive European market for electricity. The Joint Final Report of the project, titled 'Economic Foundations for Energy Policy' is published as a Special Issue of Energy in Europe, December 1999. All reports are available on the Internet, www.shared-analysis.fhg.de/ The project started in January 1998, involving about 100 months of scientific labour. The project consortium consisted of nine member institutes co-ordinated by the Fraunhofer

Economic feasibility of CHP facilities fueled by biomass from unused agriculture land

DEFF Research Database (Denmark)

Pfeifer, Antun; Dominkovic, Dominik Franjo; Ćosić, Boris

2016-01-01

In this paper, the energy potential of biomass from growing short rotation coppice on unused agricultural land in the Republic of Croatia is used to investigate the feasibility of Combined Heat and Power (CHP) facilities fueled by such biomass. Large areas of agricultural land that remain unused...

Development of a Wood Powder Fuelled 35 kW Stirling CHP Unit

DEFF Research Database (Denmark)

Pålsson, M.; Carlsen, Henrik

2003-01-01

For biomass fuelled CHP in sizes below 100 kW, Stirling engines are the only feasible alternative today. Using wood powder as fuel, the Stirling engine can be heated directly by the flame like when using a gaseous or liquid fuel burner. However, the combustion chamber will have to be much larger...... recirculation (CGR) a smaller air preheater can be used, while system efficiency will increase compared with using excess air for flame cooling. In a three-year project, a wood powder fuelled Stirling engine CHP unit will be developed and run in field test. The project will use the double-acting four......-cylinder Stirling engine SM3D with an electric output of 35 kW. This engine is a further development of the engine SM3B that has been developed at the Technical University of Denmark. The engine heater is being adapted for use with wood powder as fuel. During a two-year period a combustion system for this engine...

EFFICIENCY OF THE USE OF HEAT PUMPS ON THE CHP PLANTS

Directory of Open Access Journals (Sweden)

Juravleov A.A.

2007-04-01

Full Text Available The work is dedicated to the calculus of the efficiency of the use of heat pumps on the CHP plants. There are presented the interdependences between the pay-back period and NPV of heat pump and the price of 1 kWt of thermal power of heat pump and of the tariff of electricity.

Should a small combined heat and power plant (CHP) open to its regional power and heat networks? Integrated economic, energy, and emergy evaluation of optimization plans for Jiufa CHP

International Nuclear Information System (INIS)

Peng, T.; Lu, H.F.; Wu, W.L.; Campbell, D.E.; Zhao, G.S.; Zou, J.H.; Chen, J.

2008-01-01

The development of industrial ecology has led company managers to increasingly consider their company's niche in the regional system, and to develop optimization plans. We used emergy-based, ecological-economic synthesis to evaluate two optimization plans for the Jiufa Combined Heat and Power (CHP) Plant, Shandong China. In addition, we performed economic input-output analysis and energy analysis on the system. The results showed that appropriately incorporating a firm with temporary extra productivity into its regional system will help maximize the total productivity and improve ecological-economic efficiency and benefits to society, even without technical optimization of the firm itself. In addition, developing a closer relationship between a company and its regional system will facilitate the development of new optimization opportunities. Small coal-based CHP plants have lower-energy efficiency, higher environmental loading, and lower sustainability than large fossil fuel and renewable energy-based systems. The emergy exchange ratio (EER) proved to be an important index for evaluating the vitality of highly developed ecological-economic systems

Energetic and exergetic efficiencies of coal-fired CHP (combined heat and power) plants used in district heating systems of China

International Nuclear Information System (INIS)

Liao, Chunhui; Ertesvåg, Ivar S.; Zhao, Jianing

2013-01-01

The efficiencies of coal-fired CHP (combined heat and power) plants used in the district heating systems of China were analyzed with a thermodynamic model in the Hysys program. The influences of four parameters were evaluated by the Taguchi method. The results indicated that the extraction steam flow rate and extraction steam pressure are the most important parameters for energetic and exergetic efficiencies, respectively. The relations between extraction steam flow rate, extraction steam pressure and the energetic and exergetic efficiencies were investigated. The energetic and exergetic efficiencies were compared to the RPES (relative primary energy savings) and the RAI (relative avoided irreversibility). Compared to SHP (separate heat and power) generation, the CHP systems save fuel energy when extraction ratio is larger than 0.15. In the analysis of RAI, the minimum extraction ratio at which CHP system has advantages compared with SHP varies between 0.25 and 0.6. The higher extraction pressure corresponds to a higher value. Two of the examined plants had design conditions giving RPES close to zero and negative RAI. The third had both positive RPES and RAI at design conditions. The minimum extraction ratio can be used as an indicator to design or choose CHP plant for a given district heating system. - Highlights: • Extraction flow rate and extraction pressure are the most important parameters. • The exergetic efficiency depends on the energy to exergy ratio and system boundary. • The minimum extraction ratio is a key indicator for CHP plants. • Program Hysys and Taguchi method are used in this research

An assessment of the present and future opportunities for combined heat and power with district heating (CHP-DH) in the United Kingdom

International Nuclear Information System (INIS)

Kelly, Scott; Pollitt, Michael

2010-01-01

As global fuel reserves are depleted, alternative and more efficient forms of energy generation and delivery will be required. Combined heat and power with district heating (CHP-DH) provides an alternative energy production and delivery mechanism that is less resource intensive, more efficient and provides greater energy security than many popular alternatives. It will be shown that the economic viability of CHP-DH networks depends on several principles, namely (1) the optimisation of engineering and design principles; (2) organisational and regulatory frameworks; (3) financial and economic factors. It was found that in the long term DH is competitive with other energy supply and distribution technologies such as electricity and gas. However, in the short to medium term it is shown that economic risk, regulatory uncertainty and lock-in of existing technology are the most significant barriers to CHP-DH development. This research suggests that under the present regulatory and economic paradigm, the infrastructure required for DH networks remains financially prohibitive; the implementation of government policies are complicated and impose high transaction costs, while engineering solutions are frequently not implemented or economically optimised. If CHP-DH is going to play any part in meeting climate change targets then collaboration between public and private organisations will be required. It is clear from this analysis that strong local government involvement is therefore necessary for the co-ordination, leadership and infrastructural deployment of CHP-DH.

Large-Scale Combined Heat and Power (CHP) Generation at Loviisa Nuclear Power Plant Unit 3

International Nuclear Information System (INIS)

Bergroth, N.

2010-01-01

Fortum has applied for a Decision in Principle concerning the construction of a new nuclear power plant unit (Loviisa 3) ranging from 2800-4600 MWth at its site located at the southern coast of Finland. An attractive alternative investigated is a co-generation plant designed for large-scale district heat generation for the Helsinki metropolitan area that is located approximately 75 km west of the site. The starting point is that the district heat generation capacity of 3 unit would be around 1 000 MWth.The possibility of generating district heat for the metropolitan area by Loviisa's two existing nuclear power plant units was investigated back in the 1980s, but it proved unpractical at the time. With the growing concern of the climate change and the subsequent requirements on heat and power generation, the idea is much more attractive today, when recognising its potential to decrease Finland's carbon dioxide emissions significantly. Currently the district heat generation in metropolitan area is based on coal and natural gas, producing some five to seven million tonnes of carbon dioxide emissions annually. Large-scale combined heat and power (CHP) generation at the 3 unit could cut this figure by up to four million tonnes. This would decrease carbon dioxide emissions by as much as six percent. In addition, large-scale CHP generation would increase the overall efficiency of the new unit significantly and hence, reduce the environmental impact on the local marine environment by cutting heat discharges into the Gulf of Nuclear energy has been used for district heating in several countries both in dedicated nuclear heating plants and in CHP generation plants. However, the heat generation capacity is usually rather limited, maximum being around 250 MWth per unit. Set against this, the 3 CHP concept is much more ambitious, not only because of the much larger heat generation output envisaged, but also because the district heating water would have to be transported over a

Stirling Energy Module (SEM) as Micro-CHP; Stirling Energy Module (SEM) als Mini-BHKW

Energy Technology Data Exchange (ETDEWEB)

Schlegel, A.

2006-07-01

Since many years, a lot of effort is being put into the development of combined heat and power units (CHP) for the decentralised production of electric power. For long time, the main focus was on fuel cells. In the meantime, the Stirling technology, which is based upon classical mechanical engineering and innovative technical concepts, proceeded in its development as well. The following article describes the technology and the actual state of the development of the Stirling Energy Module (SEM) for the application as Micro-CHP in one-family-houses. SEM is based on a free-piston engine with a linear power generator, producing electric power while heating. The Stirling engine is planned the be introduced into the market as a replacement for the conventional heating systems within a couple of years. (author)

Experimental development, 1D CFD simulation and energetic analysis of a 15 kw micro-CHP unit based on reciprocating internal combustion engine

International Nuclear Information System (INIS)

Muccillo, M.; Gimelli, A.

2014-01-01

Cogeneration is commonly recognized as one of the most effective solutions to achieve the increasingly stringent reduction in primary energy consumption and greenhouse emissions. This characteristic led to the adoption of specific directives promoting this technique. In addition, a strategic role in power reliability is recognized to distributed generation. The study and prototyping of cogeneration plants, therefore, has involved many research centres. This paper deals with energetic aspects of CHP referring to the study of a 15 kW micro-CHP plant based on a LPG reciprocating engine designed, built and grid connected. The plant consists of a heat recovery system characterized by a single water circuit recovering heat from exhaust gases, from engine coolant and from the energy radiated by the engine within the shell hosting the plant. Some tests were carried out at whole open throttle and the experimental data were collected. However it was needed to perform a 1D thermo-fluid dynamics simulation of the engine to completely characterize the micro-CHP. As the heat actually recovered depends on the user's thermal load, particularly from the required temperature's level, a comparison of the results for six types of users were performed: residential, hospital, office, commercial, sports, hotel. Both Italian legislative indexes IRE and LT were evaluated, as defined by A.E.E.G resolution n. 42/02 and subsequent updates, as well as the plant's total Primary Energy Saving. - Highlights: • This paper deals with energetic aspects of CHP referring to the study of a 15 kW micro-CHP plant. • The 15 kW micro-CHP plant is based on a GPL reciprocating engine designed, built and grid connected. • Some tests were carried out at whole open throttle and the experimental data were collected. • It was needed to perform a 1D thermo-fluid dynamics simulation of the engine to completely characterize the micro-CHP. • The analysed solution is particularly suited for

Economic dispatch of a single micro-gas turbine under CHP operation

International Nuclear Information System (INIS)

Rist, Johannes F.; Dias, Miguel F.; Palman, Michael; Zelazo, Daniel; Cukurel, Beni

2017-01-01

Highlights: •Economic dispatch of a micro gas turbine is considered for smart grid integration. •A detailed thermodynamic cycle analysis is conducted for variable load CHP operation. •Benefits are shown for case studies with real demand profiles and energy tariffs. •Optimal unit schedule can be electricity, heat, revenue or maintenance-cost driven. -- Abstract: This work considers the economic dispatch of a single micro-gas turbine under combined heat and power (CHP) operation. A detailed thermodynamic cycle analysis is conducted on a representative micro-gas turbine unit with non-constant component efficiencies and recuperator bypass. Based on partial and full load configurations, an accurate optimization model is developed for solving the economic dispatch problem of integrating the turbine into the grid. The financial benefit and viability of this approach is then examined on four detailed scenarios using real data on energy demand profiles and electricity tariffs. The analysis considers the optimal operation in a large hotel, a full-service restaurant, a small hotel, and a residential neighborhood during various seasons. The optimal schedule follows four fundamental economic drivers which are electricity, heat, revenue, and maintenance-cost driven.

An energetic-exergetic analysis of a residential CHP system based on PEM fuel cell

International Nuclear Information System (INIS)

Barelli, L.; Bidini, G.; Gallorini, F.; Ottaviano, A.

2011-01-01

Highlights: → A zero-dimensional of a micro cogenerative (CHP) energy system based on a Proton Exchange Membrane fuel cell (PEMFC) has been developed. → The electrochemical model has been validated with experimental data. → The performances of this CHP system have been evaluated through a series of simulations. → An energy/exergy analysis of the simulation results has allowed to define the PEMFC optimal operating conditions. → The PEMFC optimal operating conditions detected are: 1 atm, 353.15 K and 100% RH. -- Abstract: The use of fuel cell systems for distributed residential power generation represents an interesting alternative to traditional thermoelectric plants due to their high efficiency and the potential recovering of the heat generated by the internal electrochemical reactions. In this paper the study of a micro cogenerative (CHP) energy system based on a Proton Exchange Membrane fuel cell (PEMFC) is reported. With the aim to evaluate the performance and then the feasibility of this non-conventional energy system, in consideration of thermal and electrical basic demand of a multifamily apartment blocks, a zero-dimensional PEMFC model in Aspen Plus environment has been developed. A simulations sequence has been carried out at different operating conditions of the fuel cell (varying temperature, pressure and relative humidity). Subsequently, on the basis of the obtained results, an energy/exergy analysis has been conducted to define the optimal operating conditions of the PEMFC that ensures the most efficient use of the energy and exergy inputs.

Energy policy responses to the climate change challenge: The consistency of European CHP, renewables and energy efficiency policies

Energy Technology Data Exchange (ETDEWEB)

Grohnheit, P.E.

1999-09-01

This report is Volume 14 of individual reports of the Shared Analysis Project prepared for the European Commission, Directorate General for Energy. The three major objectives of the project were: to design a common framework of energy analysis that aimed to involve all Member States and the experts of industrial research groups (the shared approach to energy analysis); To analyse generic EU-wide issues important for energy policy and for future energy demand and production, putting particular emphasis on world energy market trends, strategic energy policy responses to the Kyoto process, and evaluation of response strategies to increasing energy import dependence and to climate change activities; to carry out quantitative analyses of energy trends and scenarios as an input for discussion. The present volume considers three main issues concerning energy policy responses to the climate change challenge: the penetration of CHP and renewables according to official objectives, focusing on infrastructure and institutions rather than technology; the consistency of promotion of CHP, renewables and energy savings at the same time; consumers' choices and priorities in a liberalised market. The volume describes examples of policies in several Member States for these technologies with emphasis on CHP for both large-scale and small-scale district heating systems. The penetration of CHP technologies is analysed quantitatively using a traditional optimisation model approach for stylised regions with heat markets suitable for CHP and facing a competitive European market for electricity. The Joint Final Report of the project, titled 'Economic Foundations for Energy Policy' is published as a Special Issue of Energy in Europe, December 1999. All reports are available on the Internet, www.shared-analysis.fhg.de/ The project started in January 1998, involving about 100 months of scientific labour. The project consortium consisted of nine member institutes co-ordinated by

A MATHEMATICAL MODEL OF CHP 2000 TYPE PROGRESSIVE GEAR

Directory of Open Access Journals (Sweden)

Paweł Lonkwic

2016-12-01

Full Text Available The project of CHP2000 type progressive gear has been presented in the article. The offered solution from its construction point of view differs from the existing solutions due to the application of Belleville springs packets supporting the braking roller cam and achieving a flexible range of the gear loading. The standard concept of the gear loading within a mathematical and a geometrical model has been presented in the article. The proposed solution can be used in the friction lifts with the loading capacity from 8500 up to 20000 N.

Optimal fuel-mix in CHP plants under a stochastic permit price. Risk-neutrality versus risk-aversion

International Nuclear Information System (INIS)

Lappi, Pauli; Ollikka, Kimmo; Ollikainen, Markku

2010-01-01

This paper studies the optimal fuel-mix of a CHP producer under emission permit price risk. The producer's multi-fuel plant uses two CO 2 -intensive fuels and one clean fuel. Using a mean-variance framework we develop three models. The models are divided into spot-models (risk neutral and risk averse cases) and a forward-model (risk averse case). We derive the effects of price risk on optimal fuel use. An increase in price risk can in fact increase the use of CO 2 -intensive fuel in the spot-model. In the forward-model, the production and financial decisions are separate. We also evaluate the risk-bearing behavior of seven Finnish CHP producers. We found that risk-neutrality describes behavior better than risk-aversion. (author)

Economic feasibility of CHP facilities fueled by biomass from unused agriculture land: Case of Croatia

International Nuclear Information System (INIS)

Pfeifer, Antun; Dominković, Dominik Franjo; Ćosić, Boris; Duić, Neven

2016-01-01

Highlights: • Potential of unused agricultural land for biomass and fruit production is assessed. • Technical and energy potential of biomass from SRC and fruit pruning is calculated. • Economic feasibility of CHP plants utilizing biomass from SRC is presented for Croatia. • Sensitivity analysis and recommendations for shift toward feasibility are provided. - Abstract: In this paper, the energy potential of biomass from growing short rotation coppice on unused agricultural land in the Republic of Croatia is used to investigate the feasibility of Combined Heat and Power (CHP) facilities fueled by such biomass. Large areas of agricultural land that remain unused for food crops, represent significant potential for growing biomass that could be used for energy. This biomass could be used to supply power plants of up to 15 MW_e in accordance with heat demands of the chosen locations. The methodology for regional energy potential assessment was elaborated in previous work and is now used to investigate the conditions in which such energy facilities could be feasible. The overall potential of biomass from short rotation coppice cultivated on unused agricultural land in the scenarios with 30% of the area is up to 10 PJ/year. The added value of fruit trees pruning biomass represents an incentive for the development of fruit production on such agricultural land. Sensitivity analysis was conducted for several parameters: cost of biomass, investment costs in CHP systems and combined change in biomass and technology cost.

Spatial distribution of pollutants in the area of the former CHP plant

Science.gov (United States)

Cichowicz, Robert

2018-01-01

The quality of atmospheric air and level of its pollution are now one of the most important issues connected with life on Earth. The frequent nuisance and exceedance of pollution standards often described in the media are generated by both low emission sources and mobile sources. Also local organized energy emission sources such as local boiler houses or CHP plants have impact on air pollution. At the same time it is important to remember that the role of local power stations in shaping air pollution immission fields depends on the height of emitters and functioning of waste gas treatment installations. Analysis of air pollution distribution was carried out in 2 series/dates, i.e. 2 and 10 weeks after closure of the CHP plant. In the analysis as a reference point the largest intersection of streets located in the immediate vicinity of the plant was selected, from which virtual circles were drawn every 50 meters, where 31 measuring points were located. As a result, the impact of carbon dioxide, hydrogen sulfide and ammonia levels could be observed and analyzed, depending on the distance from the street intersection.

Elimination of restraints on the propagation of combined heat and power (CHP) generation systems in Switzerland; Beseitigung von Hemmnissen bei der Verbreitung von Waermekraftkopplung (WKK) in der Schweiz

Energy Technology Data Exchange (ETDEWEB)

Rieder, S.; Landis, F. [Interface Politikstudien Forschung Beratung, Luzern (Switzerland); Lienhard, A.; Marti Locher, F. [Universitaet Bern, Kompetenzzentrum fuer Public Management (KPM), Bern (Switzerland); Krummenacher, S. [Enerprice Partners AG, Technopark Luzern, Root Laengenbold (Switzerland)

2009-04-15

This report for the Swiss Federal Office of Energy (SFOE) discusses the results of study initiated by the SFOE that was to investigate the reasons for the low level of proliferation of CHP technology in Switzerland. The two main questions asked - which factors inhibit the use of CHP in particular application areas and which energy-policy measures can remove such obstacles - are discussed. The use of CHP in various areas of application from waste incineration plants through to units used in residential buildings is analysed and commented on. Recommendations on measures that can be taken to enhance the use of CHP are discussed. Three strategy variants available to the public services area are presented and discussed. It is noted that a consensus between players in the technical and political areas is necessary

CHP and Local Governments: Case Studies and EPA’s New Guide (Webinar) – September 30, 2014

Science.gov (United States)

This webinar presents two case studies of CHP development projects undertaken through cooperation between private companies and government entities, and introduces an EPA guide to assist local governments to reduce greenhouse gas (GHG) emissions.

Assessment of the implementation issues for fuel cells in domestic and small scale stationary power generation and CHP applications

Energy Technology Data Exchange (ETDEWEB)

Graham, G.; Cruden, A.; Hart, J.

2002-07-01

This report discusses implementation issues associated with the use of fuel cells in <10 kW domestic, small-scale power generation and combined heat and power (CHP) operations in the UK. The report examines the key issues (fuel cell system standards and certification, fuel infrastructure, commercial issues and competing CHP technologies), before discussing non-technical issues including finance, ownership, import and export configuration, pricing structure, customer acceptability, installation, operation and training of servicing and commissioning personnel. The report goes on to discuss market and technical drivers, grid connection issues and solutions, operations and maintenance. Recommendations for the future are made.

Optimal fuel-mix in CHP plants under a stochastic permit price. Risk-neutrality versus risk-aversion

Energy Technology Data Exchange (ETDEWEB)

Lappi, Pauli; Ollikka, Kimmo; Ollikainen, Markku [Department of Economics and Management, P.O. Box 27, University of Helsinki, FIN-00014 Helsinki (Finland)

2010-02-15

This paper studies the optimal fuel-mix of a CHP producer under emission permit price risk. The producer's multi-fuel plant uses two CO{sub 2}-intensive fuels and one clean fuel. Using a mean-variance framework we develop three models. The models are divided into spot-models (risk neutral and risk averse cases) and a forward-model (risk averse case). We derive the effects of price risk on optimal fuel use. An increase in price risk can in fact increase the use of CO{sub 2}-intensive fuel in the spot-model. In the forward-model, the production and financial decisions are separate. We also evaluate the risk-bearing behavior of seven Finnish CHP producers. We found that risk-neutrality describes behavior better than risk-aversion. (author)

Optimal fuel-mix in CHP plants under a stochastic permit price: Risk-neutrality versus risk-aversion

Energy Technology Data Exchange (ETDEWEB)

Lappi, Pauli, E-mail: pauli.lappi@helsinki.f [Department of Economics and Management, P.O. Box 27, University of Helsinki, FIN-00014 Helsinki (Finland); Ollikka, Kimmo, E-mail: kimmo.ollikka@helsinki.f [Department of Economics and Management, P.O. Box 27, University of Helsinki, FIN-00014 Helsinki (Finland); Ollikainen, Markku, E-mail: markku.ollikainen@helsinki.f [Department of Economics and Management, P.O. Box 27, University of Helsinki, FIN-00014 Helsinki (Finland)

2010-02-15

This paper studies the optimal fuel-mix of a CHP producer under emission permit price risk. The producer's multi-fuel plant uses two CO{sub 2}-intensive fuels and one clean fuel. Using a mean-variance framework we develop three models. The models are divided into spot-models (risk neutral and risk averse cases) and a forward-model (risk averse case). We derive the effects of price risk on optimal fuel use. An increase in price risk can in fact increase the use of CO{sub 2}-intensive fuel in the spot-model. In the forward-model, the production and financial decisions are separate. We also evaluate the risk-bearing behavior of seven Finnish CHP producers. We found that risk-neutrality describes behavior better than risk-aversion.

Modeling and optimization of a 1 kWe HT-PEMFC-based micro-CHP residential system

DEFF Research Database (Denmark)

Arsalis, Alexandros; Nielsen, Mads Pagh; Kær, Søren Knudsen

2012-01-01

A high temperature-proton exchange membrane (HT-PEMFC)-based micro-combined-heat-and-power (CHP) residential system is designed and optimized, using a genetic algorithm (GA) optimization strategy. The proposed system consists of a fuel cell stack, steam methane reformer (SMR) reactor, water gas...

Research, Development and Demonstration of Micro-CHP Systems for Residential Applications - Phase I

Energy Technology Data Exchange (ETDEWEB)

Robert A. Zogg

2011-03-14

The objective of the Micro-CHP Phase I effort was to develop a conceptual design for a Micro-CHP system including: Defining market potential; Assessing proposed technology; Developing a proof-of-principle design; and Developing a commercialization strategy. TIAX LLC assembled a team to develop a Micro-CHP system that will provide electricity and heating. TIAX, the contractor and major cost-share provider, provided proven expertise in project management, prime-mover design and development, appliance development and commercialization, analysis of residential energy loads, technology assessment, and market analysis. Kohler Company, the manufacturing partner, is a highly regarded manufacturer of standby power systems and other residential products. Kohler provides a compellingly strong brand, along with the capabilities in product development, design, manufacture, distribution, sales, support, service, and marketing that only a manufacturer of Kohler's status can provide. GAMA, an association of appliance and equipment manufacturers, provided a critical understanding of appliance commercialization issues, including regulatory requirements, large-scale market acceptance issues, and commercialization strategies. The Propane Education & Research Council, a cost-share partner, provided cost share and aided in ensuring the fuel flexibility of the conceptual design. Micro-CHP systems being commercialized in Europe and Japan are generally designed to follow the household thermal load, and generate electricity opportunistically. In many cases, any excess electricity can be sold back to the grid (net metering). These products, however, are unlikely to meet the demands of the U.S. market. First, these products generally cannot provide emergency power when grid power is lost--a critical feature to market success in the U.S. Even those that can may have insufficient electric generation capacities to meet emergency needs for many U.S. homes. Second, the extent to which net

In-situ corrosion investigation at Masnedø CHP plant - a straw-fired power plant

DEFF Research Database (Denmark)

Montgomery, Melanie; Karlsson, Asger

1999-01-01

Various austenitic and ferritic steels were exposed on a water-cooled probe in the superheater area of a straw-fired CHP plant. The temperature of the probe ranged from 450-600°C and the period of exposure was 1400 hours. The rate of corrosion was assessed based on unattacked metal remaining...

Efficiency evaluation of gas fuelled and electric driven buses in the public transport sector

Energy Technology Data Exchange (ETDEWEB)

Aigner, Tobias Alexander

2013-07-01

The following report evaluates the efficiency of gas fuelled and electric driven buses in the public transport sector on a theoretical basis. The results indicate that the combination of CHP power plants and electric driven buses reach an overall efficiency of about 51% throughout the production chain (Well-to-Wheel), including heat distribution losses. The overall Well-to-Wheel efficiency for conventional gas turbines without heat recovery decreases to around 28%. For gas fuelled buses the Well-to-Wheel efficiency is about 30%. The Co2-emissions are evaluated based on the example of a #Left Double Quotation Mark#Volvo B10L CNG#Right Double Quotation Mark# gas bus and the electric driven #Left Double Quotation Mark#Eurabus 600#Right Double Quotation Mark#. The low energy consumption of the electric driven bus results in Co2-emissions of only 181.4 g Co2/km (Grid-to-Wheel). Depending on the utilised power plant technology the overall Co2-emissions (Well-to-Wheel) amount to 307.5 g Co2/km for a CHP power plant and 553.5 g Co2/km for a conventional gas turbine. On the other hand, gas fuelled buses emit about 1.25 kg Co2/km (Tank-to-Wheel), which is eightfold the emissions of an electrical bus. The Well-to-Tank emissions further increase to about 1.32 kg Co2/km. The emission calculation is based on real gas consumption data from a Norwegian public transport utility. The results indicate that the combination of CHP plants and electrical buses provide a much higher efficiency while reducing Co2-emissions. (author)

Identification of an operon, Pil-Chp, that controls twitching motility and virulence in Xylella fastidiosa.

Science.gov (United States)

Cursino, Luciana; Galvani, Cheryl D; Athinuwat, Dusit; Zaini, Paulo A; Li, Yaxin; De La Fuente, Leonardo; Hoch, Harvey C; Burr, Thomas J; Mowery, Patricia

2011-10-01

Xylella fastidiosa is an important phytopathogenic bacterium that causes many serious plant diseases, including Pierce's disease of grapevines. Disease manifestation by X. fastidiosa is associated with the expression of several factors, including the type IV pili that are required for twitching motility. We provide evidence that an operon, named Pil-Chp, with genes homologous to those found in chemotaxis systems, regulates twitching motility. Transposon insertion into the pilL gene of the operon resulted in loss of twitching motility (pilL is homologous to cheA genes encoding kinases). The X. fastidiosa mutant maintained the type IV pili, indicating that the disrupted pilL or downstream operon genes are involved in pili function, and not biogenesis. The mutated X. fastidiosa produced less biofilm than wild-type cells, indicating that the operon contributes to biofilm formation. Finally, in planta the mutant produced delayed and less severe disease, indicating that the Pil-Chp operon contributes to the virulence of X. fastidiosa, presumably through its role in twitching motility.

Feasibility study of a Thermo-Photo-Voltaic system for CHP application in residential buildings

International Nuclear Information System (INIS)

Bianchi, Michele; Ferrari, Claudio; Melino, Francesco; Peretto, Antonio

2012-01-01

Highlights: ► The profitability of Thermo-Photo-Voltaic generator systems for a single-family dwelling is analyzed. ► Heat and electricity load profiles depending on hour of the day are considered for an entire year. ► The effect of Thermo-Photo-Voltaic generator size is evaluated for different household utilities. ► Results allow to identify the conditions for the energetic and economic convenience of Thermo-Photo-Voltaic system. -- Abstract: The growing demand of energy coupled with an increasing attention to the environmental impact have forced, in the last decades, toward the study and the development of new strategies in order to reduce primary energy consumptions. The cogeneration (CHP) and the on-site generation (also known as distributed generation) could be the key strategy to achieve this goal; CHP systems allow to reduce the fuel consumption and pollutant emissions (in particular the greenhouse gases) compared to separate generation; moreover on-site-generation contributes to the reduction of the energy which is lost in electricity transmission, and increases the security in the energy supply. In this scenario the Thermo-Photo-Voltaic generation (TPV) is obtaining an increasing attention; TPV is a system to convert into electrical energy the radiation emitted from an artificial heat source (i.e. the combustion of fuel) by the use of photovoltaic cells. A domestic gas furnace based on this technology can provide the entire thermal need of an apartment and can also contributes to satisfy the electrical demand. The aim of this study is the understanding of the behavior of a TPV in CHP application in case of residential buildings, under both the energetic and economical point of view; in particular a parametrical analysis is developed and discussed varying the TPV electrical efficiency, the thermal request and the apartment typology.

A price mechanism for supply demand matching in local grid of households with micro-CHP

NARCIS (Netherlands)

Larsen, G.K.H.; van Foreest, N.D.; Scherpen, J.M.A.

2012-01-01

This paper describes a dynamic price mechanism to coordinate eletric power generation from micro Combined Heat and Power (micro-CHP) systems in a network of households. It is assumed that the households are prosumers, i.e. both producers and consumers of electricity. The control is done on household

Modeling and parametric study of a 1 kWe HT-PEMFC-based residential micro-CHP system

DEFF Research Database (Denmark)

Arsalis, Alexandros; Nielsen, Mads Pagh; Kær, Søren Knudsen

2011-01-01

A detailed thermodynamic, kinetic and geometric model of a micro-CHP (Combined-Heatand-Power) residential system based on High Temperature-Proton Exchange Membrane Fuel Cell (HT-PEMFC) technology is developed, implemented and validated. HT-PEMFC technology is investigated as a possible candidate...

Fuel cell power plants for decentralised CHP applications

International Nuclear Information System (INIS)

Ohmer, Martin; Mattner, Katja

2015-01-01

Fuel cells are the most efficient technology to convert chemical energy into electricity and heat and thus they could have a major impact on reducing fuel consumption, CO 2 and other emissions (NO x , SO x and particulate matter). Fired with natural or biogas and operated with an efficiency of up to 49 % a significant reduction of fuel costs can be achieved in decentralised applications. Combined heat and power (CHP) configurations add value for a wide range of industrial applications. The exhaust heat of approximately 400 C can be utilised for heating purposes and the production of steam. Besides, it can be also fed directly to adsorption cooling systems. With more than 110 fuel cell power plants operating worldwide, this technology is a serious alternative to conventional gas turbines or gas engines.

Micro CHP as a new business model. Trianel distribution system decentralised production; Mikro-BHKW als neues Geschaeftsmodell. Trianel-Netzwerk Dezentrale Erzeugung

Energy Technology Data Exchange (ETDEWEB)

Nicolai, Michel [Trianel GmbH, Aachen (Germany)

2013-04-29

About four years ago, an energy distribution company in Hamburg (Federal Republic of Germany) reported on mini and micro CHP in the media. When it comes to a decentralized production of electricity and heat, however public utilities are the perfect partner: the decentralized power generation in flexible adjustable combined heat and power plants offers the opportunity to provide highly efficient heat and power directly at the place of consumption. In addition, regional and municipal utilities score with the theme mini and micro CHP for their customers due to the support on the way to more energy efficiency.

A Compound Herbal Preparation (CHP) in the Treatment of Children with ADHD: A Randomized Controlled Trial

Science.gov (United States)

Katz, M.; Adar Levine, A.; Kol-Degani, H.; Kav-Venaki, L.

2010-01-01

Objective: Evaluation of the efficacy of a patented, compound herbal preparation (CHP) in improving attention, cognition, and impulse control in children with ADHD. Method: Design: A randomized, double-blind, placebo-controlled trial. Setting: University-affiliated tertiary medical center. Participants: 120 children newly diagnosed with ADHD,…

Comparative analysis of organizational obstacles to CHP/DH

Energy Technology Data Exchange (ETDEWEB)

Ruedig, W.

1986-04-01

An explanation is given of the vast differences between the countries of Western Europe in the adoption of combined heat and power (CHP) for district heating (DH). The history of this technology in FR Germany and the UK is analysed in detail, and experiences of other countries are reviewed. It is concluded that the over centralization of the electricity supply industry is a major obstacle in the widespread adoption of combined heat and power and district heating. Significant improvements of energy efficiency would thus require organizational reforms giving greater powers to local energy organizations. This, however, should not imply total decentralization of energy supply. Instead, a two-tier system is proposed in which central organizations remain responsible for bulk supply but where local or regional bodies are in charge of all gas, electricity and heat supplies to the final user.

Energy-economy interactions revisited within a comprehensive sectoral model

Energy Technology Data Exchange (ETDEWEB)

Hanson, D. A.; Laitner, J. A.

2000-07-24

This paper describes a computable general equilibrium (CGE) model with considerable sector and technology detail, the ``All Modular Industry Growth Assessment'' Model (AMIGA). It is argued that a detailed model is important to capture and understand the several rolls that energy plays within the economy. Fundamental consumer and industrial demands are for the services from energy; hence, energy demand is a derived demand based on the need for heating, cooling mechanical, electrical, and transportation services. Technologies that provide energy-services more efficiently (on a life cycle basis), when adopted, result in increased future output of the economy and higher paths of household consumption. The AMIGA model can examine the effects on energy use and economic output of increases in energy prices (e.g., a carbon charge) and other incentive-based policies or energy-efficiency programs. Energy sectors and sub-sector activities included in the model involve energy extraction conversion and transportation. There are business opportunities to produce energy-efficient goods (i.e., appliances, control systems, buildings, automobiles, clean electricity). These activities are represented in the model by characterizing their likely production processes (e.g., lighter weight motor vehicles). Also, multiple industrial processes can produce the same output but with different technologies and inputs. Secondary recovery, i.e., recycling processes, are examples of these multiple processes. Combined heat and power (CHP) is also represented for energy-intensive industries. Other modules represent residential and commercial building technologies to supply energy services. All sectors of the economy command real resources (capital services and labor).

The future of industrial CHIP in Germany, including the tertiary sector. Papers

Energy Technology Data Exchange (ETDEWEB)

Radgen, P; Schmid, C; Mannsbart, W; Jochem, E

2000-07-01

In 1998 the electricity production in industrial installations in Germany was about 40 TWh. This accounts for 66% of the total electricity production with CHP plants in Germany. The presentation will analyse the developments for industrial CHP throughout the last 10 years and will try to explain the developments. The difficult situation for the industrial CHP shows up from the sharp decrease of the total installed capacity by about 2000 MW during 1996 and 1998, already in approach of the full liberalisation of the electricity market in Germany, which has resulted in further and even more plant shut downs. Based on a survey of the German Association of Industrial Autoproducers and Energy Consumers (VIK) plants with a total capacity of 500 MW were closed down in 1999, and about 60% of the industrial CHP installation are facing serious economic problems. The presentation will show some sample economic calculations for different types of plants (Coal fired steam turbines, gas turbines, IC-engines). These results will be compared to the actual energy cost structures for industrial customers. Based on large over capacity in power generation, the offered electricity prices for industrial customers tend to be in the range off the operating cost of the industrial CHP plants. One way out of this dilemma is sometimes the outsourcing and contracting of CHP installations, which has been and still is a growing business in Germany, and utilities regard these options as a possibility to keep their industrial customers. (orig.)

Heading towards the nZEB through CHP+HP systems. A comparison between retrofit solutions able to increase the energy performance for the heating and domestic hot water production in residential buildings

International Nuclear Information System (INIS)

Salata, Ferdinando; Golasi, Iacopo; Domestico, Umberto; Banditelli, Matteo; Lo Basso, Gianluigi; Nastasi, Benedetto; Lieto Vollaro, Andrea de

2017-01-01

Highlights: • Energy optimization measures to increase the energy class of buildings. • Analysis of the demands related to the space-heating season and the production of annual DHW. • Case study related to a residential building of medium size located in Rome (Italy). • Improvements on building envelope and on systems (traditional technologies or CHP+HP). • Energy and economic analysis to achieve the performance of a nZEB. - Abstract: Optimizing consumptions in the field of civil construction led to define energy labels for residential buildings. To calculate the building energy demand the EPgl was determined, i.e. the annual consumption per m"2 of primary energy. This paper examines the technical solutions useful to optimize the energy demands for heating during space-heating season and domestic hot water production (thanks to energy analysis softwares as MC11300 and TRNSYS) and, at the same time, to take into account the financial issues those interventions implied. The total inside heated surface of the building case study is 1204.00 m"2, hence the inside heated volume is about 3250.80 m"3. Besides the more traditional interventions concerning the building envelope and its systems, the paper examined the performance of a system obtained through the combination of a cogenerator (CHP) and a heat pump (HP), thus, substituting the conventional boilers of the buildings. CHP+HP solution increases the most the energy label of the building (from a D class with EPgl = 59.62 kW h m"−"2 year"−"1, to an A class, with EPgl = 25.64 kW h m"−"2 year"−"1), determining an annual energy cost saving of 3,114 € year"−"1, allowing to amortize installation costs (54,560 €) in a reasonable payback period, i.e. 15.4 years. This innovative solution in the residential sector can be realized through retrofit interventions on existing buildings, hence it leads the current dwelling towards nZEB with a remarkable benefits for the environment.

Advanced m-CHP fuel cell system based on a novel bio-ethanol fluidized bed membrane reformer

NARCIS (Netherlands)

Viviente, J.L.; Melendez Rey, J.; Pacheco Tanaka, D.A.; Gallucci, F.; Spallina, V.; Manzolini, G.; Foresti, S.; Palma, V.; Ruocco, C.; Roses, L.

2017-01-01

Distributed power generation via Micro Combined Heat and Power (m-CHP) systems, has been proven to over-come disadvantages of centralized generation since it can give savings in terms of Primary Energy consumption and energy costs. The FluidCELL FCH JU/FP7 project aims at providing the Proof of

Training health care teams in intercultural communication and patient safety

DEFF Research Database (Denmark)

Odgaard, Eva; Pedersen, Lise

2017-01-01

Patientsikkerhed gennem effektiv kommunikation Patientsikkerhed i sundhedsvæsnet afhænger blandt andre faktorer af effektiv kommunikation mellem personale og patienter og mellem sundhedspersonale indbyrdes. Effektiv kommunikation udfordres i situationer, hvor der opstår kulturelle og eller sprogl...

Experimental study and modelling of degradation phenomena in HTPEM fuel cell stacks for use in CHP systems

DEFF Research Database (Denmark)

Andreasen, Søren Juhl

2009-01-01

Degradation phenomena in HTPEM fuel cells for use in CHP systems were investigated experimentally and by modelling. It was found that the two main degradation mechanisms in HTPEM fuel cells are carbon corrosion and Pt agglomeration. On basis of this conclusion a mechanistic model, describing...

The Design, Construction, and Experimental Evaluation of a Compact Thermoacoustic-Stirling Engine Generator for Use in a micro-CHP Appliance

Science.gov (United States)

Wilcox, Douglas A., Jr.

Micro combined heat and power or micro-CHP is the simultaneous generation of useful heat and electricity on a residential scale. The heat and electricity are produced at the point of use, avoiding the distribution losses associated with a centralized power plant. These appliances combine a conventional gas-fired condensing boiler with an electric power module capable of generating electricity from the heat of combustion. Currently, the leading power modules for micro-CHP appliances are free-piston Stirling engines (FPSEs) which can generate 1050 watts of electricity at a thermal-to-electric efficiency of 26%.[1] These external combustion engines have been under development for the last 25 years, with FPSE micro-CHP appliances only recently being introduced to the commercial market. Publications by developers assert unlimited service life and high efficiency, with low noise and emissions; but despite these claims, the actual reliability and cost of manufacturing has prevented their successful mass-market adoption. A Thermoacoustic-Stirling Engine Generator or TaSEG is one possible alternative to FPSE's. A TaSEG uses a thermoacoustic engine, or acoustic heat engine, which can efficiently convert high temperature heat into acoustic power while maintaining a simple design with fewer moving parts than traditional FPSE's. This simpler engine is coupled to an electrodynamic alternator capable of converting acoustic power into electricity. This thesis outlines the design, construction, and experimental evaluation of a TaSEG which is appropriate for integration with a gas burner inside of a residential micro- CHP appliance. The design methodology is discussed, focusing on how changes in the geometry affected the predicted performance. Details of its construction are given and the performance of the TaSEG is then outlined. The TaSEG can deliver 132 watts of electrical output power to an electric load with an overall measured thermal-to-electric (first law) efficiency of eta

Renewables and CHP with District Energy in Support of Sustainable Communities

Energy Technology Data Exchange (ETDEWEB)

Snoek, Chris

2010-09-15

This paper addresses the powerful idea of connecting many energy users to environmentally optimum energy sources through integrated community energy systems. Such systems require piping networks for distributing thermal energy, i.e., district heating and cooling (DHC) systems. The possibilities and advantages of the application of integrated energy concepts are discussed, including the economic and environmental benefits of integrating localized electrical generating systems (CHP), transportation systems, industrial processes and other thermal energy requirements. Examples of a number of operating systems are provided. Some of the R and D carried out by the IEA Implementing Agreement on District Heating and Cooling is also described.

Energy versus economic effectiveness in CHP (combined heat and power) applications: Investigation on the critical role of commodities price, taxation and power grid mix efficiency

International Nuclear Information System (INIS)

Comodi, Gabriele; Rossi, Mosè

2016-01-01

Starting from PES (primary energy saving) and CSR (cost saving ratio) definitions the work pinpoints a “grey area” in which CHP (combined heat and power – cogeneration) units can operate with profit and negative PES. In this case, CHP can be profitably operated with lower efficiency with respect to separate production of electrical and thermal energy. The work defines the R-index as the ratio between the cost of fuel and electricity. The optimal value of R-index for which CHP units operate with both environmental benefit (PES > 0) and economic profitability (CSR > 0) is the reference value of electrical efficiency, η_e_l_-_r_e_f, of separate production (national power grid mix). As a consequence, optimal R-index varies from Country to Country. The work demonstrates that the value of R corresponds to the minimum value of electrical efficiency for which any power generator operates with profit. The paper demonstrates that, with regard to the profitability of cogeneration, the ratio between the cost of commodities is more important than their absolute value so that different taxation of each commodity can be a good leverage for energy policy makers to promote high efficiency cogeneration, even in the absence of an incentive mechanism. The final part of the study presents an analysis on micro-CHP technologies payback times for different European Countries. - Highlights: • Investigation of the grey area where CHP profitably operates also with negative PES. • Study starts from definition of primary energy saving PES and cost saving ratio CSR. • Definition of the R-index as the ratio between the cost of fuel and electricity. • The optimal value of R for which the “grey area” disappears is R = η_e_l_-_r_e_f. • R is also the value of η_e_l for which any electric generator profitably operates.

Emissions from decentralised CHP plants 2007 - Energinet.dk Environmental project no. 07/1882

DEFF Research Database (Denmark)

Nielsen, Malene; Nielsen, Ole-Kenneth; Thomsen, Marianne

Updated emission factors for decentralised combined heat and power (CHP) plants with a capacity project emission measurements as well as emission measurements performed in recent years that were collected. The emission factors valid for 2006/2007 have been...... estimated for the plant technologies: Municipal solid waste (MSW) incineration plants, plants combusting straw or wood, natural gas fuelled reciprocating engines, biogas fuelled engines, natural gas fuelled gas turbines, gas oil fuelled reciprocating engines, gas oil fuelled gas turbines, steam turbines...

Small distributed generation versus centralised supply: a social cost-benefit analysis in the residential and service sectors

International Nuclear Information System (INIS)

Gulli, Francesco

2006-01-01

This paper aims at measuring the social benefits of small CHP distributed generation (DG) in the residential and service sectors. We do this by comparing the social costs of decentralised and centralised supplies, simulating 'ideal' situations in which any source of allocative inefficiencies is eliminated. This comparison focuses on assessing internal and external costs. The internal costs are calculated by simulating the optimal prices of the electricity and gas inputs. The external costs are estimated by using and elaborating the results of the dissemination process of the ExternE project, one of the most recent and accurate methodologies in this field. The analysis takes into account the main sources of uncertainty about the parameter values, including uncertainty about external cost estimations. Despite these sources of uncertainty, the paper concludes that centralised supply is still preferable to small DG. In fact, the overall range of DG social competitiveness is restricted, even considering further remarkable improvements in DG electrical efficiency and investment costs. The results are particularly unfavourable for the residential sector, whereas, in the service sector, the performance of DG technologies is slightly better

DEVELOPMENT OF THE CHP-THERMAL SCHEMES IN CONTEXTS OF THE CONSOLIDATED ENERGY SYSTEM OF BELARUS

Directory of Open Access Journals (Sweden)

V. N. Romaniuk

2015-01-01

Full Text Available The paper deals with the structural specifics of the Belarus Consolidated Energy System capacities in view of their ongoing transfer to the combined-cycle technology, building the nuclear power plant and necessity for the generating capacity regulation in compliance with the load diagram. With the country’s economic complex energy utilization pattern being preserved, the generating capacities are subject to restructuring and the CHP characteristics undergo enhancement inter alia a well-known increase of the specific electricity production based on the heat consumption. Because of this the steam-turbine condensation units which are the traditional capacity regulators for the energy systems with heat power plants dominance are being pushed out of operation. In consequence of this complex of changes the issue of load diagram provision gains momentum which in evidence is relevant to the Consolidated Energy System of Belarus. One of the ways to alleviate acuteness of the problem could be the specific electric energy production cut on the CHP heat consumption with preserving the heat loads and without their handover to the heat generating capacities of direct combustion i.e. without fuel over-burning. The solution lies in integrating the absorption bromous-lithium heat pump units into the CHP thermal scheme. Through their agency low-temperature heat streams of the generator cooling, the lubrication and condensation heat-extraction of steam minimal passing to the condenser systems are utilized. As a case study the authors choose one of the CHPs in the conditions of which the corresponding employment of the said pumps leads to diminution of the fuel-equivalent specific flow-rate by 20−25 g for 1 kW⋅h production and conjoined electric energy generation capacity lowering. The latter will be handed over to other generating capacities, and the choice of them affects economic expediency of the absorption bromous-lithium heat pump-units installation

Total cost of ownership of CHP SOFC systems: Effect of installation context

International Nuclear Information System (INIS)

Arduino, Francesco; Santarelli, Massimo

2016-01-01

Solid oxide fuel cells (SOFC) are one of the most interesting between the emerging technologies for energy production. Although some information about the production cost of these devices are already known, their operational cost has not been studied yet with sufficient accuracy. This paper presents a life cycle cost (LCC) analysis of CHP (combined heat and power) SOFC systems performed in hospitals located in various cities of the US and one in Italy. In this study the strong effects of the installation context will be analyzed using a customized use phase model for each location. The cost effectiveness of these devices has been proved without credits in Mondovi (IT), New York (NY) and Minneapolis (MN) where the payback time goes from 10 to 7 years. Considering the credits, it is possible to obtain economic feasibility also in Chicago (IL) and reduce the payback for other cities to values from 4 to 6 years. In other cities like Phoenix (AZ) and Houston (TX) the payback can’t be reached in any case. The life cycle impact assessment analysis has shown how, even in the cities with cleaner electricity grid, there is a reduction in the emissions of both greenhouse gases and pollutants. - Highlights: •Life cycle cost analysis has been performed for CHP SOFC systems. •The strong effects of the installation context have been analyzed. •Economic feasibility has been proven in new york, Minneapolis and Mondovi. •Economic feasibility can’t be reached in phoenix and Houston. •SOFC always provide a reduction in the emissions of greenhouse gases and pollutant.

Optimization of a High Temperature PEMFC micro-CHP System by Formulation and Application of a Process Integration Methodology

DEFF Research Database (Denmark)

Arsalis, Alexandros; Nielsen, Mads Pagh; Kær, Søren Knudsen

2013-01-01

A 1 kWe micro combined heat and power (CHP) system based on high temperature proton exchange membrane fuel cell (PEMFC) technology is modeled and optimized by formulation and application of a process integration methodology. The system can provide heat and electricity for a singlefamily household...

Energetic and Exergetic Analysis of a Heat Exchanger Integrated in a Solid Biomass-Fuelled Micro-CHP System with an Ericsson Engine

Directory of Open Access Journals (Sweden)

Marie Creyx

2016-04-01

Full Text Available A specific heat exchanger has been developed to transfer heat from flue gas to the working fluid (hot air of the Ericsson engine of a solid biomass-fuelled micro combined heat and power (CHP. In this paper, the theoretical and experimental energetic analyses of this heat exchanger are compared. The experimental performances are described considering energetic and exergetic parameters, in particular the effectiveness on both hot and cold sides. A new exergetic parameter called the exergetic effectiveness is introduced, which allows a comparison between the real and the ideal heat exchanger considering the Second Law of Thermodynamics. A global analysis of exergetic fluxes in the whole micro-CHP system is presented, showing the repartition of the exergy destruction among the components.

Small-scale CHP Plant based on a 35 kWel Hermetic Four Cylinder Stirling Engine for Biomass Fuels- Development, Technology and Operating Experiences

DEFF Research Database (Denmark)

Obernberger, I.; Carlsen, Henrik; Biedermann, F.

2003-01-01

) process and the Stirling engine process. The ORC process represents an economically interesting technology for small-scale biomass-fired combined heat and power plants in a power range between 400 and 1,500 kWel. A newly developed ORC technology with a nominal electric capacity of 1,000 kW was implemented...... in the biomass CHP plant Lienz (A) in the framework of an EU demonstration project. This plant was put in operation in February 2002. Stirling engines are a promising solution for installations with nominal electric capacities between 10 and 150 kW. A biomass CHP pilot plant based on a 35 kWel-Stirling engine...

A CSP plant combined with biomass CHP using ORC-technology in Bronderslev Denmark

DEFF Research Database (Denmark)

Perers, Bengt; Furbo, Simon; Yuan, Guofeng

2017-01-01

A new CSP plant combined with biomass CHP, using ORC technology, will be built and taken into operation in Bronderslev, Denmark during spring 2017. The price for Biomass is expected to increase with more and more use of this very limited energy source and then CSP will be cost effective in the long...... run, also in the Danish climate. Oil is used as heat transfer fluid instead of steam giving several advantages in this application for district heating at high latitudes. Total efficiencies and costs, competitive to PV plants. are expected....

CHP biomass gasifier for the Zwarts Gerbera Nursery. Technical and economic feasibility; Biomassavergasser-WKK voor Gerberakwekerij Zwarts. Technische inpassing en economische haalbaarheid

Energy Technology Data Exchange (ETDEWEB)

Peeters, S.; Hart, A. [Energy Matters, Driebergen (Netherlands)

2011-10-15

This report describes the feasibility of a CHP gasifier at the Zwarts gerbera nursery. Using the insights from this study, a picture has been sketched for energy production by means of gasification in the horticultural sector. Note, however, that each plant specie has its own specific growth requirements in terms of nutrients, heating-cooling, light, but also relative humidity and CO2. So a 'typical' horticulturer with an 'average' energy requirement is hard to define. The economic viability must be determined for each individual situation. The outcomes of this study can therefore not be automatically used for other projects. Technically, a lot is possible, so the submitted quotes show. Of the 16 suppliers, 3 offer CHP gasifiers which, subject to conditions, not only burn wood but also other low-grade residual waste such as road verge grass, reed and miscanthus. This low-grade residual waste has the advantage of being cheaper than wood. A low biomass price lowers the operating costs and improves the economic profitability of the relatively expensive installations. The investment for a complete CHP gasifier is 5 to 10 times higher than for a normal gas CHP installation. The CO2 consumption also influences the economic profitability. Buying CO2 is a costly business. The technical and economic feasibility of harvesting CO2 from flue gas was therefore explored. Two CO2 harvesting installations (of Procede and Knook) were examined for this purpose. According to Procede and Knook, CO2 harvesting is not economically profitable for a CHP gasifier with a relatively low power capacity (up to 800 kWe). CO2 procurement or generation by means of the existing gas-fired boiler therefore seems more viable. The technical-economic feasibility study shows that an investment in a CHP gasifier is not profitable due to the relatively high investment and maintenance costs. CO2 demand and the uncertain biomass prices are stumbling blocks. However, the picture changes

Integration of renewable energy into the transport and electricity sectors through V2G

International Nuclear Information System (INIS)

Lund, Henrik; Kempton, Willett

2008-01-01

Large-scale sustainable energy systems will be necessary for substantial reduction of CO 2 . However, large-scale implementation faces two major problems: (1) we must replace oil in the transportation sector, and (2) since today's inexpensive and abundant renewable energy resources have fluctuating output, to increase the fraction of electricity from them, we must learn to maintain a balance between demand and supply. Plug-in electric vehicles (EVs) could reduce or eliminate oil for the light vehicle fleet. Adding 'vehicle-to-grid' (V2G) technology to EVs can provide storage, matching the time of generation to time of load. Two national energy systems are modelled, one for Denmark, including combined heat and power (CHP) and the other a similarly sized country without CHP (the latter being more typical of other industrialized countries). The model (EnergyPLAN) integrates energy for electricity, transport and heat, includes hourly fluctuations in human needs and the environment (wind resource and weather-driven need for heat). Four types of vehicle fleets are modelled, under levels of wind penetration varying from 0% to 100%. EVs were assumed to have high power (10 kW) connections, which provide important flexibility in time and duration of charging. We find that adding EVs and V2G to these national energy systems allows integration of much higher levels of wind electricity without excess electric production, and also greatly reduces national CO 2 emissions

New CHP plant for a rubber products manufacturer; Nueva planta e cogeneración para un fabricante de productos de hule

Energy Technology Data Exchange (ETDEWEB)

Vila, R.; Martí, C.

2016-07-01

At the end of 2014 the company Industrias de Hule Galgo decided to undertake the installation project of an efficient CHP plant for its production plant, with the aim of bringing down energy costs and improving the company’s competitive position in the market. The new plant has already started its first operational phase. The project has comprised the installation of a single cycle with gas-powered gensets providing a total electrical capacity of 6.6 MW. This provides the necessary thermal oil for the production plant; covers 100% of the electrical power consumed by the industrial complex; and also generates cooling water, giving improved production capacity by supercooling the extrusion system. To execute these works, Industrias de Hule Galgo contracted the services of engineering company AESA to provide the engineering, procurement and construction of the CHP plant. (Author)

Carbon Debt Payback Time for a Biomass Fired CHP Plant—A Case Study from Northern Europe

Directory of Open Access Journals (Sweden)

Kristian Madsen

2018-03-01

Full Text Available The European Union (EU has experienced a large increase in the use of biomass for energy in the last decades. In 2015, biomass used to generate electricity, heat, and to a limited extent, liquid fuels accounted for 51% of the EU’s renewable energy production. Bioenergy use is expected to grow substantially to meet energy and climate targets for 2020 and beyond. This development has resulted in analyses suggesting the increased use of biomass for energy might initially lead to increased greenhouse gas (GHG emissions to the atmosphere, a so-called carbon debt. Here, we analyze carbon debt and payback time of substituting coal with forest residues for combined heat and power generation (CHP. The analysis is, in contrast to most other studies, based on empirical data from a retrofit of a CHP plant in northern Europe. The results corroborate findings of a carbon debt, here 4.4 kg CO2eq GJ−1. The carbon debt has a payback time of one year after conversion, and furthermore, the results show that GHG emissions are reduced to 50% relative to continued coal combustion after about 12 years. The findings support the use of residue biomass for energy as an effective means for climate change mitigation.

Environmental implications of carbon limits on market ...

Science.gov (United States)

Combined heat and power (CHP) is promoted as an economical, energy-efficient option for combating climate change. To fully examine the viability of CHP as a clean-technology solution, its market potential and impacts need to be analyzed as part of scenarios of the future energy system, particularly those with policies limiting greenhouse gas (GHG) emissions. This paper develops and analyzes scenarios using a bottom-up, technology rich optimization model of the U.S. energy system. Two distinct carbon reduction goals were set up for analysis. In Target 1, carbon emission reduction goals were only included for the electric sector. In Target 2, carbon emission reduction goals were set across the entire energy system with the target patterned after the U.S.’s commitment to reducing GHG emissions as part of the Paris Agreement reached at the COP21 summit. From a system-wide carbon reduction standpoint, Target 2 is significantly more stringent. In addition, these scenarios examine the implications of various CHP capacity expansion and contraction assumptions and energy prices. The largest CHP capacity expansion are observed in scenarios that included Target 1, but investments were scaled back in scenarios that incorporated Target 2. The latter scenario spurred rapid development of zero-emissions technologies within the electric sector, and purchased electricity increased dramatically in many end-use sectors. The results suggest that CHP may play a role in a carbon-c

Optimal economic dispatch of FC-CHP based heat and power micro-grids

International Nuclear Information System (INIS)

Nazari-Heris, Morteza; Abapour, Saeed; Mohammadi-Ivatloo, Behnam

2017-01-01

Highlights: • The multi objective economic/environmental heat and power MG dispatch is solved. • The heat and power MG include FC, CHP, boiler, storage system, and heat buffer tank. • Multi objective scheduling of heat and power MG is solved using ε-constraint method. • DR program is employed in the stochastic programming of heat and power MG dispatch. • The uncertainties for load demand and price signals are taken into account. - Abstract: Micro-grids (MGs) are introduced as a solution for distributed energy resource (DER) units and energy storage systems (ESSs) to participate in providing the required electricity demand of controllable and non-controllable loads. In this paper, the authors study the short-term scheduling of grid-connected industrial heat and power MG which contains a fuel cell (FC) unit, combined heat and power (CHP) generation units, power-only unit, boiler, battery storage system, and heat buffer tank. The paper is aimed to solve the multi-objective MG dispatch problem containing cost and emission minimization with the considerations of demand response program and uncertainties. A probabilistic framework based on a scenario method, which is considered for load demand and price signals, is employed to overcome the uncertainties in the optimal energy management of the MG. In order to reduce operational cost, time-of-use rates of demand response programs have been modeled, and the effects of such programs on the load profile have been discussed. To solve the multi-objective optimization problem, the ε-constraint method is used and a fuzzy satisfying approach has been employed to select the best compromise solution. Three cases are studied in this research to confirm the performance of the proposed method: islanded mode, grid-connected mode, and the impact of time of the use-demand response program on MG scheduling.

Situation analysis in relation to district heating and CHP in the Baltic Sea Region: Estonia, Latvia, Lithuania, Poland, Russia, Kaliningrad

International Nuclear Information System (INIS)

2000-11-01

The situation analysis embraces chapters on: Estonia, Kaliningrad, Latvia, Lithuania, Poland and Russia, which experience varying degrees of difficulties with the transition to a market economy, and with integrating into the world market. In the following, the focus is on Lithuania, which has been visited during the project period. Lithuania has specific problems due to the existence of the Ignalina power plant, but has nevertheless characteristics, which apply to Estonia and Latvia as well. The problem with the quality of heat supply is rampant in all the countries, as is legal framework for the sector, except in Poland, which has generally attracted much attention from investors over the last ten years and has experienced a relatively sound political development in the energy sector. The main problem in all countries seem to relate to the policy development. The case of Lithuania confirms this. Following the observations on Lithuania, it is attempted to establish some points of concern, which are relevant to a greater or lesser extent in all countries, as well as some suggestions on how to move towards a solution of those problems. As mentioned Poland is generally in a better position, technically and politically than the three Baltic states, whereas Russia still needs to progress much on those issues. The general recommendations for initiatives in the Baltic countries in question are in brief: Establishing a clear view at governmental level of what the EU and liberalisation will bring, and what needs to be done additionally to secure main energy political objectives. Issues such as security of supply, environmental protection, low cost energy supplies and security of investments need to be thoroughly discussed at national level. It is important to understand that EU Directives provide a framework, not an answer to the future of the energy sector. Reinforcement of governmental bodies that deal with the practical problems of the energy sector. The main task of

National energy policies: Obstructing the reduction of global CO2 emissions? An analysis of Swedish energy policies for the district heating sector

International Nuclear Information System (INIS)

Difs, Kristina

2010-01-01

The effect of national energy policies on a local Swedish district heating (DH) system has been studied, regarding the profitability of new investments and the potential for climate change mitigation. The DH system has been optimised regarding three investments: biomass-fuelled CHP (bio CHP), natural gas-fuelled combined cycle CHP (NGCC CHP) and biomass-fuelled heat-only boiler (bio HOB) in two scenarios (with or without national taxes and policy instruments). In both scenarios EU's tradable CO 2 emission permits are included. Results from the study show that when national policies are included, the most cost-effective investment option is the bio CHP technology. However, when national taxes and policy instruments are excluded, the DH system containing the NGCC CHP plant has 30% lower system cost than the bio CHP system. Regardless of the scenario and when coal condensing is considered as marginal electricity production, the NGCC CHP has the largest global CO 2 reduction potential, about 300 ktonne CO 2 . However, the CO 2 reduction potential is highly dependent on the marginal electricity production. Demonstrated here is that national policies such as tradable green certificates can, when applied to DH systems, contribute to investments that will not fully utilise the DH systems' potential for global CO 2 emissions reductions. - Research highlights: →Swedish energy policies are promoting biomass fuelled electricity generating technologies over efficient fossil fuel electricity generating technologies. →An efficient fossil fuel technology like the natural gas combine cycle CHP technology with high power-to-heat ratio has potential to reduce the global CO 2 emissions more than a biomass fuelled electricity generating technology. →Swedish energy policies such as tradable green certificates for renewable electricity can, when applied to district heating systems, contribute to investments that will not fully utilise the district heating systems potential for

Optimal stochastic scheduling of CHP-PEMFC, WT, PV units and hydrogen storage in reconfigurable micro grids considering reliability enhancement

International Nuclear Information System (INIS)

Bornapour, Mosayeb; Hooshmand, Rahmat-Allah; Khodabakhshian, Amin; Parastegari, Moein

2017-01-01

Highlights: • Stochastic model is proposed for coordinated scheduling of renewable energy sources. • The effect of combined heat and power is considered. • Uncertainties of wind speed, solar radiation and electricity market price are considered. • Profit maximization, emission and AENS minimization are considered as objective functions. • Modified firefly algorithm is employed to solve the problem. - Abstract: Nowadays the operation of renewable energy sources and combined heat and power (CHP) units is increased in micro grids; therefore, to reach optimal performance, optimal scheduling of these units is required. In this regard, in this paper a micro grid consisting of proton exchange membrane fuel cell-combined heat and power (PEMFC-CHP), wind turbines (WT) and photovoltaic (PV) units, is modeled to determine the optimal scheduling state of these units by considering uncertain behavior of renewable energy resources. For this purpose, a scenario-based method is used for modeling the uncertainties of electrical market price, the wind speed, and solar irradiance. It should be noted that the hydrogen storage strategy is also applied in this study for PEMFC-CHP units. Market profit, total emission production, and average energy not supplied (AENS) are the objective functions considered in this paper simultaneously. Consideration of the above-mentioned objective functions converts the proposed problem to a mixed integer nonlinear programming. To solve this problem, a multi-objective firefly algorithm is used. The uncertainties of parameters convert the mixed integer nonlinear programming problem to a stochastic mixed integer nonlinear programming problem. Moreover, optimal coordinated scheduling of renewable energy resources and thermal units in micro-grids improve the value of the objective functions. Simulation results obtained from a modified 33-bus distributed network as a micro grid illustrates the effectiveness of the proposed method.

Danish energy-sector exports. Products and consulting services

International Nuclear Information System (INIS)

Wolter, H.C.

2000-06-01

Danish Energy Agency has previously carried out studies of Danish energy-sector exports. The latest results were published in the report, Energisektorens eksport. Produkter og raadgivning. Danish Energy Agency, September 1998. The present survey is an update of the earlier studies, and includes 1998 exports. As previously, the study, carried out in cooperation with the Confederation of Danish Industries and the Danish Council of Consulting Architects and Engineers, is based on questionnaires sent to relevant companies. In addition, information has been obtained from companies that do not belong to these organisations. On the basis of the answers received, 58 Danish companies exported products to a value of approximately DKK 16,000 million, and 22 consulting firms exported consulting services to a value of approximately DKK 370 million. These exports of approximately DKK 16.5 billion accounted for 5% of all Danish exports in 1998. In comparison with 1996, energy-sector exports have risen by more than 40% in a period in which Danish exports in general have risen by an average of 8%. Energy sector exports provide employment for more than 18,000 persons in Denmark - approximately 17,500 employees in companies that export products, and approximately 600 persons in consulting firms. To this must be added a presumably significantly larger number of persons employed by sub-suppliers to the above companies computed by value, 80% of the exports come from relatively few companies, i.e. 13 companies with products, and five offering consulting services. Energy-sector exports fall within the following product areas: 1) Wind turbines (25%). 2) District heating and combined heat and power (CHP) (21%). 3) Energy savings and control (20%). 4) Oil and natural gas (13%). 5) Electricity plants and power supply (13%). 6) Other (8%). 67% of the exports go to Western Europe, 18% to Asia, 7% to Eastern and Central Europe, and 8% to other parts of the world. (EHS)

Optimal design of integrated CHP systems for housing complexes

International Nuclear Information System (INIS)

Fuentes-Cortés, Luis Fabián; Ponce-Ortega, José María; Nápoles-Rivera, Fabricio; Serna-González, Medardo; El-Halwagi, Mahmoud M.

2015-01-01

Highlights: • An optimization formulation for designing domestic CHP systems is presented. • The operating scheme, prime mover and thermal storage system are optimized. • Weather conditions and behavior demands are considered. • Simultaneously economic and environmental objectives are considered. • Two case studies from Mexico are presented. - Abstract: This paper presents a multi-objective optimization approach for designing residential cogeneration systems based on a new superstructure that allows satisfying the demands of hot water and electricity at the minimum cost and the minimum environmental impact. The optimization involves the selection of technologies, size of required units and operating modes of equipment. Two residential complexes in different cities of the State of Michoacán in Mexico were considered as case studies. One is located on the west coast and the other one is in the mountainous area. The results show that the implementation of the proposed optimization method yields significant economic and environmental benefits due to the simultaneous reduction in the total annual cost and overall greenhouse gas emissions

Researching of the possibility of using absorption heat exchangers for creating the low return temperature heat supply systems based on CHP generation

Science.gov (United States)

Yavorovsky, Y. V.; Malenkov, A. S.; Zhigulina, Y. V.; Romanov, D. O.; Kurzanov, S. Y.

2017-11-01

This paper deals with the variant of modernization of the heat point within urban heat supply network in order to create the system of heat and cold supply on its basis, providing the suppliers with heat in cold months and with heat and cold in warm months. However, in cold months in the course of heating system operation, the reverse delivery water temperature is maintained below 40 °C. The analysis of heat and power indicators of the heat and cold supply system under different operating conditions throughout the year was conducted. The possibility to use the existing heat networks for the cold supply needs was estimated. The advantages of the system over the traditional heat supply systems that use Combined Heat and Power (CHP) plant as a heat source as exemplified by heat supply system from CHP with ST-80 turbine were demonstrated.

Thermodynamic, ecological and economic aspects of the use of the gas turbine for heat supply to the stripping process in a supercritical CHP plant integrated with a carbon capture installation

International Nuclear Information System (INIS)

Bartela, Łukasz; Skorek-Osikowska, Anna; Kotowicz, Janusz

2014-01-01

Highlights: • Variants of integration of CHP plant with CCS and gas turbine unit were analyzed. • The simulations of operation of plants under changing load were realized. • Conditions of competitiveness for all solutions were identified. • Integration can be profitable if prices of allowance will reach values >60 €/MgCO 2 . - Abstract: This paper presents the results of thermodynamic and economic analyses for eight variants of a combined heat and power (CHP) plant fuelled with coal working under supercritical steam parameters and integrated with a CO 2 capture installation and a gas turbine system. The motivation behind using a gas turbine in the system was to generate steam to supply heat for the stripping process that occurs in the separation installation to regenerate the sorbent. Additional analyses were conducted for the reference case, a CHP unit in which the CO 2 separation process was not conducted, to enable an economic evaluation of the integration of a CHP unit with a CO 2 separation installation according to the variants proposed. The break-even price of electricity and avoided emission costs were used to evaluate the respective solutions. In this paper, the results of the sensitivity analysis of the economic evaluation indicators in terms of the change in the annual operation time, price of emission allowance and heat demand rate for the realization of the stripping process for all cases are presented

THE BREAKEVEN POINT GIVEN LIMIT COST USING BIOMASS CHP PLANT

Directory of Open Access Journals (Sweden)

Paula VOICU

2015-06-01

Full Text Available Biomass is a renewable source, non-fossil, from which can be obtained fuels, which can be used in power generation systems. The main difference of fossil fuels is the availability biomass in nature and that it is in continue "reproduction". The use its enable the use of materials that could be destined destruction, as a source of energy "renewable", though result with many ecological values. In this paper we will study, applying a calculation model in view optimal sizing of the cogeneration plant based on biomass, biomass cost limit for the net present value is zero. It will consider that in cogeneration systems and in heating peak systems using biomass. After applying the mathematical model for limit value of biomass cost will determine the nominal optimal coefficient of cogeneration, for which discounted net revenue value is zero. Optimal sizing of CHP plants based on using biomass will be given by optimum coefficient of cogeneration determined following the application of the proposed mathematical model.

Computer experimental analysis of the CHP performance of a 100 kW e SOFC Field Unit by a factorial design

Science.gov (United States)

Calì, M.; Santarelli, M. G. L.; Leone, P.

Gas Turbine Technologies (GTT) and Politecnico di Torino, both located in Torino (Italy), have been involved in the design and installation of a SOFC laboratory in order to analyse the operation, in cogenerative configuration, of the CHP 100 kW e SOFC Field Unit, built by Siemens-Westinghouse Power Corporation (SWPC), which is at present (May 2005) starting its operation and which will supply electric and thermal power to the GTT factory. In order to take the better advantage from the analysis of the on-site operation, and especially to correctly design the scheduled experimental tests on the system, we developed a mathematical model and run a simulated experimental campaign, applying a rigorous statistical approach to the analysis of the results. The aim of this work is the computer experimental analysis, through a statistical methodology (2 k factorial experiments), of the CHP 100 performance. First, the mathematical model has been calibrated with the results acquired during the first CHP100 demonstration at EDB/ELSAM in Westerwoort. After, the simulated tests have been performed in the form of computer experimental session, and the measurement uncertainties have been simulated with perturbation imposed to the model independent variables. The statistical methodology used for the computer experimental analysis is the factorial design (Yates' Technique): using the ANOVA technique the effect of the main independent variables (air utilization factor U ox, fuel utilization factor U F, internal fuel and air preheating and anodic recycling flow rate) has been investigated in a rigorous manner. Analysis accounts for the effects of parameters on stack electric power, thermal recovered power, single cell voltage, cell operative temperature, consumed fuel flow and steam to carbon ratio. Each main effect and interaction effect of parameters is shown with particular attention on generated electric power and stack heat recovered.

Australian coal mine methane emissions mitigation potential using a Stirling engine-based CHP system

International Nuclear Information System (INIS)

Meybodi, Mehdi Aghaei; Behnia, Masud

2013-01-01

Methane, a major contributor to global warming, is a greenhouse gas emitted from coal mines. Abundance of coal mines and consequently a considerable amount of methane emission requires drastic measures to mitigate harmful effects of coal mining on the environment. One of the commonly adopted methods is to use emitted methane to fuel power generation systems; however, instability of fuel sources hinders the development of systems using conventional prime movers. To address this, application of Stirling engines may be considered. Here, we develop a techno-economic methodology for conducting an optimisation-based feasibility study on the application of Stirling engines as the prime movers of coal mine CHP systems from an economic and an environmental point of view. To examine the impact of environmental policies on the economics of the system, the two commonly implemented ones (i.e. a carbon tax and emissions trading scheme) are considered. The methodology was applied to a local coal mine. The results indicate that incorporating the modelled system not only leads to a substantial reduction in greenhouse gas emissions, but also to improved economics. Further, due to the heavy economic burden, the carbon tax scheme creates great incentive for coal mine industry to address the methane emissions. -- Highlights: •We study the application of Stirling engines in coal mine CHP systems. •We develop a thermo-economic approach based on the net present worth analysis. •We examine the impact of a carbon tax and ETS on the economics of the system. •The modeled system leads to a substantial reduction in greenhouse gas emissions. •Carbon tax provides a greater incentive to address the methane emissions

Experience of Implementing a Distributed Control System for Thermal and Mechanical and Electrical Equipment at the South-West CHP

Energy Technology Data Exchange (ETDEWEB)

Babkin, K. V., E-mail: babkin@uztec.ru; Tsvetkov, M. S.; Kostyuk, R. I.; Chugin, A. V. [SC “South-West CHP” (Russian Federation); Bilenko, V. A.; Molchanov, K. A.; Fedunov, V. V. [JSC “Interautomatika” (Russian Federation)

2015-01-15

Results of implementing an SPPA-T3000-based unified distributed control system for thermal and mechanical and electrical equipment at the South-West CHP are discussed. Hardware solutions for integration with local control systems, control of electrical equipment in compliance with the standards IEC 61850, Modbus RTU, and communication between the plant control system and the System Operator of the Unified Power System are described.

Experience of Implementing a Distributed Control System for Thermal and Mechanical and Electrical Equipment at the South-West CHP

International Nuclear Information System (INIS)

Babkin, K. V.; Tsvetkov, M. S.; Kostyuk, R. I.; Chugin, A. V.; Bilenko, V. A.; Molchanov, K. A.; Fedunov, V. V.

2015-01-01

Results of implementing an SPPA-T3000-based unified distributed control system for thermal and mechanical and electrical equipment at the South-West CHP are discussed. Hardware solutions for integration with local control systems, control of electrical equipment in compliance with the standards IEC 61850, Modbus RTU, and communication between the plant control system and the System Operator of the Unified Power System are described

Energy Analysis and Multi-Objective Optimization of an Internal Combustion Engine-Based CHP System for Heat Recovery

Directory of Open Access Journals (Sweden)

Abdolsaeid Ganjehkaviri

2014-10-01

Full Text Available A comprehensive thermodynamic study is conducted of a diesel based Combined Heat and Power (CHP system, based on a diesel engine and an Organic Rankine Cycle (ORC. Present research covers both energy and exergy analyses along with a multi-objective optimization. In order to determine the irreversibilities in each component of the CHP system and assess the system performance, a complete parametric study is performed to investigate the effects of major design parameters and operating conditions on the system’s performance. The main contribution of the current research study is to conduct both exergy and multi-objective optimization of a system using different working fluid for low-grade heat recovery. In order to conduct the evolutionary based optimization, two objective functions are considered in the optimization; namely the system exergy efficiency, and the total cost rate of the system, which is a combination of the cost associated with environmental impact and the purchase cost of each component. Therefore, in the optimization approach, the overall cycle exergy efficiency is maximized satisfying several constraints while the total cost rate of the system is minimized. To provide a better understanding of the system under study, the Pareto frontier is shown for multi-objective optimization and also an equation is derived to fit the optimized point. In addition, a closed form relationship between exergy efficiency and total cost rate is derived.

Five-year outcomes for frontline brentuximab vedotin with CHP for CD30-expressing peripheral T-cell lymphomas.

Science.gov (United States)

Fanale, Michelle A; Horwitz, Steven M; Forero-Torres, Andres; Bartlett, Nancy L; Advani, Ranjana H; Pro, Barbara; Chen, Robert W; Davies, Andrew; Illidge, Tim; Uttarwar, Mayur; Lee, Shih-Yuan; Ren, Hong; Kennedy, Dana A; Shustov, Andrei R

2018-05-10

This phase 1 study evaluated frontline brentuximab vedotin in combination with cyclophosphamide, doxorubicin, and prednisone (BV+CHP; 6 cycles, then up to 10 cycles of brentuximab vedotin monotherapy) in 26 patients with CD30 + peripheral T-cell lymphoma, including 19 with systemic anaplastic large cell lymphoma. All patients (100%) achieved an objective response, with a complete remission (CR) rate of 92%; none received a consolidative stem cell transplant. After a median observation period of 59.6 months (range, 4.6-66.0) from first dose, neither the median progression-free survival (PFS) nor the median overall survival (OS) was reached. No progression or death was observed beyond 35 months. The estimated 5-year PFS and OS rates were 52% and 80%, respectively. Eighteen of 19 patients (95%) with treatment-emergent peripheral neuropathy (PN) reported resolution or improvement of symptoms. Thirteen patients (50%) remained in remission at the end of the study, with PFS ranging from 37.8+ to 66.0+ months. Eight of these 13 patients received the maximum 16 cycles of study treatment. These final results demonstrate durable remissions in 50% of patients treated with frontline BV+CHP, suggesting a potentially curative treatment option for some patients. This trial was registered at www.clinicaltrials.gov as #NCT01309789. © 2018 by The American Society of Hematology.

Investigation of Continuous Gas Engine CHP Operation on Biomass Producer Gas

DEFF Research Database (Denmark)

Ahrenfeldt, Jesper; Henriksen, Ulrik Birk; Jensen, Torben Kvist

2005-01-01

More than 2000 hours of gas engine operation with producer gas from biomass as fuel has been conducted on the gasification CHP demonstration and research plant, named “Viking” at the Technical University of Denmark. The gas engine is an integrated part of the entire gasification plant. The excess...... operates with varying excess of air due to variation in gas composition and thus stoichiometry, and a second where the excess of air in the exhaust gas is fixed and the flow rate of produced gas from the gasifier is varying. The interaction between the gas engine and the gasification system has been...... investigated. The engine and the plant are equipped with continuously data acquisition that monitors the operation including the composition of the producer gas and the flow. Producer gas properties and contaminations have been investigated. No detectable tar or particle content was observed...

Natural gas–biomass dual fuelled microturbines: Comparison of operating strategies in the Italian residential sector

International Nuclear Information System (INIS)

Pantaleo, Antonio M.; Camporeale, Sergio; Shah, Nilay

2014-01-01

This paper compares different operating strategies for small scale (100 kWe) combined heat and power (CHP) plants fired by natural gas and solid biomass to serve a residential energy demand. The focus is on a dual fuel micro gas turbine (MGT) cycle. Various biomass/natural gas energy input ratios are modelled, in order to assess the trade-offs between: (i) lower energy conversion efficiency and higher investment cost when increasing the biomass input rate; (ii) higher primary energy savings and revenues from feed-in tariff available for biomass electricity fed into the grid. The strategies of baseload (BL), heat driven (HD) and electricity driven (ED) plant operation are compared, for an aggregate of residential end-users in cold, average and mild climate conditions. On the basis of the results from thermodynamic assessment and simulation at partial load operation, CAPEX and OPEX estimates, and Italian energy policy scenario (incentives available for biomass electricity, on-site and high efficiency CHP), the maximum global energy efficiency, primary energy savings and investment profitability is found, as a function of biomass/natural gas ratio, plant operating strategy and energy demand typology. The thermal and electric conversion efficiency ranged respectively between 46 and 38% and 30 and 19% for the natural gas and biomass fired case studies. The IRR of the investment was highly influenced by the load/CHP thermal power ratio and by the operation mode. The availability of high heat demand levels was also a key factor, to avoid wasted cogenerated heat and maximize CHP sales revenues. BL operation presented the highest profitability because of the higher revenues from electricity sales. Climate area was another important factor, mainly in case of low load/CHP ratios. Moreover, at low load/CHP power ratio and for the BL operation mode, the dual fuel option presented the highest profitability. This is due to the lower cost of biomass fuel in comparison to natural

Hydrocarbon emissions from gas engine CHP-units. 2011 measurement program

Energy Technology Data Exchange (ETDEWEB)

Van Dijk, G.H.J. [KEMA, Arnhem (Netherlands)

2012-06-15

In December 2009, the Ministry of Infrastructure and Environment (IandM) issued the Decree on Emission Limits for Middle Sized Combustion Installations (BEMS). This decree imposes a first-time emission limit value (ELV) of 1500 mg C/m{sup 3}{sub o} at 3% O{sub 2} for hydrocarbons emitted by gas engines. IandM used the findings of two hydrocarbon emission measurement programs, executed in 2007 and 2009, as a guideline for this initial ELV. The programs did reveal substantial variation in the hydrocarbon emissions of the gas engines tested. This variation, and especially the uncertainty as to the role of engine and/or other parameters causing such variation, was felt to hamper further policy development. IandM therefore commissioned KEMA to perform follow-up measurements on ten gas engine CHP-units in 2011. Aim of this 2011 program is to assess hydrocarbon emission variation in relation to engine parameters and process conditions including maintenance status, and to atmospheric conditions. The 2011 program comprised two identical measurement sessions, one in spring and one in winter.

Encouraging Combined Heat and Power in California Buildings

Energy Technology Data Exchange (ETDEWEB)

Stadler, Michael [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Groissbock, Markus [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Cardoso, Goncalo [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Muller, Andreas [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Lai, Judy [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States)

2013-02-01

Governor Brown’s research priorities include an additional 6.5 GW of combined heat and power (CHP) by 2030. As of 2009, roughly 0.25 GW of small natural gas and biogas fired CHP is documented by the Self-Generation Incentive Program (SGIP) database. The SGIP is set to expire, and the anticipated grid de-carbonization based on the development of 20 GW of renewable energy will influence the CHP adoption. Thus, an integrated optimization approach for this analysis was chosen that allows optimizing the adoption of distributed energy resources (DER) such as photovoltaics (PV), CHP, storage technologies, etc. in the California commercial sector from the building owners’ perspective. To solve this DER adoption problem the Distributed Energy Resources Customer Adoption Model (DER-CAM), developed by the Lawrence Berkeley National Laboratory and used extensively to address the problem of optimally investing and scheduling DER under multiple settings, has been used. The application of CHP at large industrial sites is well known, and much of its potential is already being realized. Conversely, commercial sector CHP, especially those above 50 to 100 kW peak electricity load, is widely overlooked. In order to analyze the role of DER in CO₂ reduction, 147 representative sites in different climate zones were selected from the California Commercial End Use Survey (CEUS). About 8000 individual optimization runs, with different assumptions for the electric tariffs, natural gas costs, marginal grid CO₂ emissions, and nitrogen oxide treatment costs, SGIP, fuel cell lifetime, fuel cell efficiency, PV installation costs, and payback periods for investments have been performed. The most optimistic CHP potential contribution in this sector in 2020 will be 2.7 GW. However, this result requires a SGIP in 2020, 46% average electric efficiency for fuel cells, a payback period for investments of 10 years, and a CO₂ focused approach of the building owners. In

Reducing the network load and optimization of the economic efficiency of CHP plants by forecast-guided control; Verringerung der Netzbelastung und Optimierung der Wirtschaftlichkeit von KWK-Anlagen durch prognosegefuehrte Steuerung

Energy Technology Data Exchange (ETDEWEB)

Glaser, Daniel; Adelhardt, Stefan [Erlangen-Nuernberg Univ., Erlangen (Germany). Lehrstuhl fuer Sensorik; beECO GmbH, Erlangen (Germany)

2012-07-01

Heat-guided combined heat and power (CHP) plants often cause large compensation energy amounts, additional costs to the operator respectively and another burden on the parent network. The balance energy is caused by errors in the production forecast whose quality heavily depends on the heat load performance. This paper identifies the forecasting problems with heat-guided CHP and reveals how the accompanying cost and the network burden can be reduced. This is achieved by an improvement of the forecast in conjunction with a forecast-guided control without affecting the heat supply. In addition, an outlook on further measures to the earnings with the system is presented. (orig.)

Sizing a solar dish Stirling micro-CHP system for residential application in diverse climatic conditions based on 3E analysis

International Nuclear Information System (INIS)

Moghadam, Ramin Shabanpour; Sayyaadi, Hoseyn; Hosseinzade, Hadi

2013-01-01

Highlights: • 3E analysis was performed on solar CHP systems. • Significant primary energy saving and greenhouse gas reduction were obtained. • The engine was sized so that it had the best economic sound. • Various criteria at different weathers were used for sizing the engine. - Abstract: A solar dish Stirling cogeneration system is considered to provide energy demands of a residential building. As energy demands of the building and output power of the engine are functions of weather condition and solar irradiation flux, the benchmark building was considered to be located in five different cities in Iran with diverse climatic and solar irradiation conditions. The proposed solar dish Stirling micro-CHP system was analyzed based on 3E analysis. The 3E analysis evaluated primary energy saving analysis (energy analysis), carbon dioxide emission reduction (environmental analysis) and payback period for return of investment (economic analysis) and was compared to a reference building that utilized primary energy carriers for its demands. Three scenarios were considered for assessment and sizing the solar dish Stirling engine. In the first scenario, size of the solar dish Stirling engine was selected based on the lowest annual electric power demand while, in second, the highest annual electric power consumption was considered to specify size of the engine. In the third scenario, a solar dish Stirling engine with constant output capacity was considered for the five locations. It was shown that implementing the solar dish Stirling micro-CHP system had good potential in primary energy saving and carbon dioxide emission reduction in all scenarios and acceptable payback period for return of the investment in some scenarios. Finally, the best scenario for selecting size of the engine in each city was introduced using the TOPSIS decision making method. It was demonstrated that, for dry weather, the first scenario was the best while, for hot and humid cities and

Environmental implications of carbon limits on market penetration of combined heat and power with the U.S. energy sector (Slides)

Science.gov (United States)

Combined heat and power (CHP) is promoted as an economical, energy-efficient option for combating climate change. To fully examine the viability of CHP as a clean-technology solution, its market potential and impacts need to be analyzed as part of scenarios of the future energy s...

The effectiveness of heat pumps as part of CCGT-190/220 Tyumen CHP-1

Directory of Open Access Journals (Sweden)

Tretyakova Polina

2017-01-01

Full Text Available The article considers the possibility of increasing the energy efficiency of CCGT-190/220 Tyumen CHP-1 due to the utilization of low-grade heat given off in the condenser unit of the steam turbine. To assess the effectiveness of the proposed system, the indexes of thermal efficiency are given. As a result of a research the following conclusions are received: The heat-transfer agent heat pump, when heated uses low-grade heat TPP and increases heat output, but consumes the electricity. Using a heat pump is effective for a small temperature difference between the condenser and the evaporator. Good example is heating water before chemical treatment. This method is more efficient than using a replacement boiler and it is used in steam selection.

Integration of torrefaction in CHP plants – A case study

International Nuclear Information System (INIS)

Starfelt, Fredrik; Tomas Aparicio, Elena; Li, Hailong; Dotzauer, Erik

2015-01-01

Highlights: • We model the integration of a torrefaction reactor in a CHP plant. • Techno-economic analysis for the system is performed. • Flue gas integration of torrefaction show better performance. • Heat or electricity production is not compromised in the proposed system. - Abstract: Torrefied biomass shows characteristics that resemble those of coal. Therefore, torrefied biomass can be co-combusted with coal in existing coal mills and burners. This paper presents simulation results of a case study where a torrefaction reactor was integrated in an existing combined heat and power plant and sized to replace 25%, 50%, 75% or 100% of the fossil coal in one of the boilers. The simulations show that a torrefaction reactor can be integrated with existing plants without compromising heat or electricity production. Economic and sensitivity analysis show that the additional cost for integrating a torrefaction reactor is low which means that with an emission allowance cost of 37 €/ton CO 2 , the proposed integrated system can be profitable and use 100% renewable fuels. The development of subsidies will affect the process economy. The determinant parameters are electricity and fuel prices

Impact of the Power Sector Development on the Emission Level in Lithuania

International Nuclear Information System (INIS)

Galinis, A.; Tarvydas, D.

1998-01-01

The analyses carried out show that further necessary investments into safety improvements of the Ignalina NPP satisfy the criterion of the least cost power sector development and it should be kept in operation until the end of its technical life time. Modular CHP with diesel engines or gas turbines, or new CCGT will be the most attractive source of electricity generation if new capacities are required. The Ignalina NPP also has crucial impact on all kind of emissions in Lithuania. If this power plant is shut down, the requirement of the Kyoto Protocol for CO 2 mitigation will be violated already in 2011, even in the case of the most pessimistic economy growth and electricity export scenario. In the case of the further operation of the nuclear power plant Lithuania will be able to fulfil the requirement of the Kyoto Protocol during the whole study period. However, during temporary shut down of the nuclear plant for safety upgrade or rechannelling of reactors some reduction of electricity export will be necessary. (author)

Implications of the modelling of stratified hot water storage tanks in the simulation of CHP plants

Energy Technology Data Exchange (ETDEWEB)

Campos Celador, A., E-mail: alvaro.campos@ehu.es [ENEDI Research Group-University of the Basque Country, Departamento de Maquinas y Motores Termicos, E.T.S.I. de Bilbao Alameda de Urquijo, s/n 48013 Bilbao, Bizkaia (Spain); Odriozola, M.; Sala, J.M. [ENEDI Research Group-University of the Basque Country, Departamento de Maquinas y Motores Termicos, E.T.S.I. de Bilbao Alameda de Urquijo, s/n 48013 Bilbao, Bizkaia (Spain)

2011-08-15

Highlights: {yields} Three different modelling approaches for simulation of hot water tanks are presented. {yields} The three models are simulated within a residential cogeneration plant. {yields} Small differences in the results are found by an energy and exergy analysis. {yields} Big differences between the results are found by an advanced exergy analysis. {yields} Results on the feasibility study are explained by the advanced exergy analysis. - Abstract: This paper considers the effect that different hot water storage tank modelling approaches have on the global simulation of residential CHP plants as well as their impact on their economic feasibility. While a simplified assessment of the heat storage is usually considered in the feasibility studies of CHP plants in buildings, this paper deals with three different levels of modelling of the hot water tank: actual stratified model, ideal stratified model and fully mixed model. These three approaches are presented and comparatively evaluated under the same case of study, a cogeneration plant with thermal storage meeting the loads of an urbanisation located in the Bilbao metropolitan area (Spain). The case of study is simulated by TRNSYS for each one of the three modelling cases and the so obtained annual results are analysed from both a First and Second-Law-based viewpoint. While the global energy and exergy efficiencies of the plant for the three modelling cases agree quite well, important differences are found between the economic results of the feasibility study. These results can be predicted by means of an advanced exergy analysis of the storage tank considering the endogenous and exogenous exergy destruction terms caused by the hot water storage tank.

Modelling the adoption of industrial cogeneration in Japan using manufacturing plant survey data

International Nuclear Information System (INIS)

Bonilla, David; Akisawa, Atsushi; Kashiwagi, Takao

2003-01-01

Electric power deregulation in Japan opens opportunity for further penetration of on-site generation (cogeneration) otherwise known as distributed generation. In the paper the authors present a survey on Japanese industrial plants to fill existing gaps for the assessment of modern cogeneration (combined heat and power, CHP). The objective of the paper is to empirically examine CHP systems based on cross-sectional binary models; second to review diffusion trends of CHP by system vintage during the 1980-2000 period in the manufacturing sector. The econometric results point that the probabilities of embracing this technology increase, in declining importance, with on-site power consumption, and steam demand, operational hours as well as with payback period, purchased power. For example the survey shows that the CHP is used for the purpose of exporting power rather than meeting the plant's own consumption. Some of our results are in line with those of Dismukes and Kleit (Resource Energy Econ. 21 (1999) 153) as well with Rose and Macdonald (Energy J. 12(12) (1991) 47). We also find that a unit increase in satisfaction with CHP will lead to a 54% in CHP capacity. We find significant evidence on the cost effectiveness of CHP under conservative assumptions. Regarding the influence of satisfaction and performance indicators for the several plants, the survey threw some unexpected evidence on the nature of CHP

Process Intensification in Fuel Cell CHP Systems, the ReforCELL Project

Directory of Open Access Journals (Sweden)

José Luis Viviente

2016-10-01

Full Text Available This paper reports the findings of a FP7/FCH JU project (ReforCELL that developed materials (catalysts and membranes and an advance autothermal membrane reformer for a micro Combined Heat and Power (CHP system of 5 kWel based on a polymer electrolyte membrane fuel cell (PEMFC. In this project, an active, stable and selective catalyst was developed for the reactions of interest and its production was scaled up to kg scale (TRL5 (TRL: Technology Readiness Level. Simultaneously, new membranes for gas separation were developed. In particular, dense supported thin palladium-based membranes were developed for hydrogen separation from reactive mixtures. These membranes were successfully scaled up to TRL4 and used in lab-scale reactors for fluidized bed steam methane reforming (SMR and autothermal reforming (ATR and in a prototype reactor for ATR. Suitable sealing techniques able to integrate the different membranes in lab-scale and prototype reactors were also developed. The project also addressed the design and optimization of the subcomponents (BoP for the integration of the membrane reformer to the fuel cell system.

Midwest Clean Energy Application Center

Energy Technology Data Exchange (ETDEWEB)

Cuttica, John; Haefke, Cliff

2013-12-31

The Midwest Clean Energy Application Center (CEAC) was one of eight regional centers that promoted and assisted in transforming the market for combined heat and power (CHP), waste heat to power (WHP), and district energy (DE) technologies and concepts throughout the United States between October 1, 2009 and December 31, 2013. The key services the CEACs provided included: Market Opportunity Analyses – Supporting analyses of CHP market opportunities in diverse markets including industrial, federal, institutional, and commercial sectors. Education and Outreach – Providing information on the energy and non-energy benefits and applications of CHP to state and local policy makers, regulators, energy end-users, trade associations and others. Information was shared on the Midwest CEAC website: www.midwestcleanergy.org. Technical Assistance – Providing technical assistance to end-users and stakeholders to help them consider CHP, waste heat to power, and/or district energy with CHP in their facility and to help them through the project development process from initial CHP screening to installation. The Midwest CEAC provided services to the Midwest Region that included the states of Illinois, Indiana, Iowa, Kansas, Michigan, Minnesota, Missouri, Nebraska, North Dakota, Ohio, South Dakota, and Wisconsin.

Fuel cell power plants for decentralised CHP applications; Brennstoffzellen-Kraftwerke fuer dezentrale KWK-Anwendungen

Energy Technology Data Exchange (ETDEWEB)

Ohmer, Martin; Mattner, Katja [FuelCell Energy Solutions GmbH, Dresden (Germany)

2015-06-01

Fuel cells are the most efficient technology to convert chemical energy into electricity and heat and thus they could have a major impact on reducing fuel consumption, CO{sub 2} and other emissions (NO{sub x}, SO{sub x} and particulate matter). Fired with natural or biogas and operated with an efficiency of up to 49 % a significant reduction of fuel costs can be achieved in decentralised applications. Combined heat and power (CHP) configurations add value for a wide range of industrial applications. The exhaust heat of approximately 400 C can be utilised for heating purposes and the production of steam. Besides, it can be also fed directly to adsorption cooling systems. With more than 110 fuel cell power plants operating worldwide, this technology is a serious alternative to conventional gas turbines or gas engines.

Biomass gasification for CHP with dry gas cleaning and regenerative heat recovery

Energy Technology Data Exchange (ETDEWEB)

NONE

2002-05-01

Small scale CHP plants based on biomass gasification technologies are generally expensive and not very efficient due to gas quality problems which increase operation and maintenance cost as well as breakdown. To overcome this situation the team has developed, integrated and tested a complete biomass gasification combine heat and power prototype plant of 250 kWth equipped with a specifically developed dry gas cleaning and heat recovery system. The dry gas cleaning device is a simple dry gas regenerative heat exchanger where tars are stopped by condensation but working at a temperature above due point in order to avoid water condensation. Two types of heat particles separation devices have been tested in parallel multi-cyclone and ceramic filters. After several month spent on modelling design, construction and optimisation, a full test campaign of 400 hours continuous monitoring has been done where all working parameters has been monitored and gas cleaning device performances has been assessed. Results have shown: Inappropriateness of the ceramic filters for the small scale unit due to operation cost and too high sensibility of the filters to the operation conditions fluctuating in a wide range, despite a very high particle separation efficiency 99 %; Rather good efficiency of the multi-cyclone 72% but not sufficient for engine safety. Additional conventional filters where necessary for the finest part; Inappropriateness of the dry gas heat exchanger device for tar removal partly due to a low tar content of the syngas generated, below 100 mg/Nm{sup 3} , but also due to their composition which would have imposed, to be really efficient, a theoretical condensing temperature of 89 C below the water condensation temperature. These results have been confirmed by laboratory tests and modelling. However the tar cracking phase have shown very interesting results and proved the feasibility of thermal cracking with full cleaning of the heat exchanger without further mechanical

Development and test of a Stirling engine driven by waste gases for the micro-CHP system

International Nuclear Information System (INIS)

Li Tie; Tang Dawei; Li Zhigang; Du Jinglong; Zhou Tian; Jia Yu

2012-01-01

In recent years, micro-CHP systems are attracting world attention. As one kind of external heating engines, Stirling engines could be applied to the micro-CHP systems driven by solar, biogas, mid-high temperature waste gases and many other heat sources. The development of a Stirling engine driven by mid-high temperature waste gases is presented first. The thermodynamic design method, the key parameters of the designed Stirling engine and its combustion chamber adapted for waste gases are described in detail. Then the performance test of the Stirling engine is carried out. During the test, the temperature of the heater head is monitored by thermocouples, and the pressure of the working fluid helium in the Stirling engine is monitored by pressure sensors. The relationships among the output shaft power, torque and speed are studied, and the pressure losses of the working fluid in the heat exchanger system are also analyzed. The test results demonstrate that the output shaft power could reach 3476 W at 1248 RPM, which is in good agreement with the predicted value of 3901 W at 1500 RPM. The test results confirm the fact that Stirling engines driven by mid-high temperature waste gases are able to achieve a valuable output power for engineering application. - Highlights: ► A β-type Stirling engine whose output power could reach about 3.5 kW is developed by ourselves. ► Waste gases are used as the heat source to drive the Stirling engine. ► Test on the relationship among the power, torque, and speed are presented. ► The pressure changing process of the working fluid in the heat exchanger system during the test is recorded and analyzed.

Swedish district heating—A system in stagnation: Current and future trends in the district heating sector

International Nuclear Information System (INIS)

Magnusson, Dick

2012-01-01

This paper argues that Sweden’s old and established district heating sector is heading into a stagnation phase. The aim is to analyse the factors influencing this development as well as the strategies used by involved parties to prevent stagnation. Using large technical system theory, I analyse internal and external factors potentially causing stagnation. The most obvious external factors are: an increase in the number of energy-efficient buildings, in response to stricter energy policies, which reduces the future potential for district heating in new and existing buildings; climate change; competition from other heating systems; and market saturation in the key sector, multi-dwelling buildings. The main internal factor is changed business strategies following electricity market deregulation, when energy companies were supposed to be run on businesslike terms. I also argue that stagnation can be defined as occurring when the key measure feature of a system, in this case, heat load is starting to stagnate or decline, even though the trend is positive in other areas. The strategies for avoiding stagnation are various forms of broadening scope, primarily by focusing more on electricity production by building combined heat and power plants, or using the alternative value of the technical system for new applications. - Highlights: ► The Swedish district heating sector is heading into a stage of stagnation. ► The main reasons are: climate change, competition and energy efficient buildings. ► Strategies to change trend: broadening of scope by focusing on electricity in CHP plants. ► Contribution to Large Technical Systems—theory and the later phases of system development.

Stochastic PSO-based heat and power dispatch under environmental constraints incorporating CHP and wind power units

Energy Technology Data Exchange (ETDEWEB)

Piperagkas, G.S.; Anastasiadis, A.G.; Hatziargyriou, N.D. [National Technical University of Athens, School of Electrical and Computer Engineering, Electric Power Division, 9, Iroon Polytechneiou Str., GR-15773 Zografou, Athens (Greece)

2011-01-15

In this paper an extended stochastic multi-objective model for economic dispatch (ED) is proposed, that incorporates in the optimization process heat and power from CHP units and expected wind power. Stochastic restrictions for the CO{sub 2}, SO{sub 2} and NO{sub x} emissions are used as inequality constraints. The ED problem is solved using a multi-objective particle swarm optimization technique. The available wind power is estimated from a transformation of the wind speed considered as a random variable to wind power. Simulations are performed on the modified IEEE 30 bus network with 2 cogeneration units and actual wind data. Results concerning minimum cost and emissions reduction options are finally drawn. (author)

Combined heat and power generation: encouraged insertion plan systemic appraisal; Cogeracao no setor eletrico: avaliacao sistemica de um plano de insercao incentivada

Energy Technology Data Exchange (ETDEWEB)

Paula, Claudio P; Sauer, Ildo L [Universidade de Sao Paulo (USP), SP (Brazil). Inst. de Eletrotecnica e Energia. Programa Interunidades de Pos-Graduacao em Energia

2004-07-01

The principal objective of this paper is to evaluate the potential for self-production of combined heat and power - CHP generation - in the expansion of the Brazilian electric power supply system. The potential was determined by simulating operation of CHP plants in industries which had previously used oil derivates to supply process heat, as well as of plants for service sectors, which had consumed electricity for air conditioning. The final part of the thesis describes the policy incentives which should be implemented so that CHP can make a significant contribution at the national level, permitting better use of natural resources and leverage the penetration of natural gas in the energy market, with favorable impacts on national development. (author)

Britain stays cool on district heating

Energy Technology Data Exchange (ETDEWEB)

Jones, G

1982-04-08

Britain's wealth of energy sources has kept interest in the energy conservation potential of combined heat and power (CHP) and district heating (DH) at a low level. An active lobby for CHP/DH continues to argue against formidable odds. The Marshall group set up in the early days of the oil crisis reported on several strategies for CHP/DH and proposed technologies already proven in other European countries. The economics of abundant natural gas and coal, however, precludes commercial interest until energy prices reach higher levels. The lobbyists point out that this could occur within a short time, and local governments would do well to examine the lead-city concept for application on a national level. The present government's preference for the private sector pursuing development beyond the feasibility-study stage could make CHP/DH more of a political issue as unemployment increases. (DCK)

Increased electrical efficiency in biofueled CHP plants by biomass drying; Oekat elutbyte i biobraensleeldade kraftvaermeanlaeggningar med hjaelp av foertorkning

Energy Technology Data Exchange (ETDEWEB)

Berntsson, Mikael; Thorson, Ola; Wennberg, Olle

2010-09-15

In this report, integrated biofuel drying has been studied for two cases. One is the existing CHP plant at ENA Energi AB in Enkoeping and the other is a theoretical case. The thought plant is assumed to have a steam generating performance that is probable for a future CHP plant optimised for power production. The CHP plant at ENA Energi with its integrated bed drying system has been used as a model in this study. The plant has a grate fired boiler with the capacity to co-produce 24 MW electricity and 55 MW heat. It is designed to use biofuel with moisture content between 40 and 55 %. However, the boiler is able to manage even dryer fuels with the moisture content of about 35 % without complications. Since the boiler operates on part load during most of the season, there are free capacity which can be used for delivering heat to the drying system. The increased power production is a result of mainly two factors: Increased demand of heat as the dryer uses district heating and thus improved possibility to produce steam; and, The season of operation can be extended, since the point where the minimum load of the boiler occurs can be pushed forward as a result of increased demand of heat. For future CHP plants, an optimised plant has been used as a model. The steam data is assumed to be 170 bar and 540 deg C with reheating. For this plant, both on-site and offsite drying have been studied. The case study comprises a whole season of operation and the fuel is assumed to be dried from 50 to 10 %. The size of the optimised plant is as to fit the dimension of a main production unit in a district heating net equal to the tenth largest in Sweden. Heat delivery is assumed to be 896 GWh/year and the maximum heat delivery of district heating is 250 MW. The sizing of the boiler is made to maximise the production of electricity, and thus dependent of the drying strategy used. Flue gas condensation is assumed to be used as much as possible. It decreases the basis for power production

CHP HIGHER EDUCATION, SCHOLARSHIPS AND DEMAND ABROAD ARE POLITICS (1942-1947

Directory of Open Access Journals (Sweden)

Suat ZEYREK

2016-04-01

Full Text Available Turkey was followed by a very slow development in the course of the republic’s first year in higher education.By 1955, there are only two universities in the three cities in Turkey.Although the new university will be declared opened by Ismet Inonu’s mouth several times it was not possible for various reasons.Turkey’s economic situation, the shortage of trained personel and it has been hampered by severe conditions of World War II.But even more important excuses should have prevented the spread of higher education in Turkey. This article will be presented in the light of the real causes of the problem of archival sources mentioned above.Period ruling party, the CHP’s higher education policy followed in scholarships and dormitories were investigated.CHP likely to promote higher education in the first primary education spread to the base and thus wants to create a higher demand.For this reason, it is necessary first of all to build infrastructure for higher education institutions and rules.Coming from big cities in different regions of Anatolia youth to take education to all students experience difficulties and inclusive, egalitarian policies were followed.

Multi-period MINLP model for optimising operation and structural changes to CHP plants in district heating networks with long-term thermal storage

International Nuclear Information System (INIS)

Tveit, Tor-Martin; Savola, Tuula; Gebremedhin, Alemayehu; Fogelholm, Carl-Johan

2009-01-01

By using thermal storages it is possible to decouple the generation of power and heat, and it can also lead to an reduction in investments, as the storage can be used to cover the peak load periods. This work presents a MINLP model that can be used for analysing new investments and the long-term operation of CHP plants in a district heating network with long-term thermal storage. The model presented in this work includes the non-linear off-design behaviour of the CHP plants as well as a generic mathematical model of the thermal storage, without the need to fix temperatures and pressure. The model is formulated in such a way that it is suitable for deterministic MINLP solvers. The model is non-convex, and subsequently global optimality cannot be guaranteed with local solvers. In order to reduce the chance of obtaining a poor local optimum compared to the global optimum, the model should be solved many times with the initial values varying randomly. It is possible to extract a lot of results from the model, for instance total annual profit, the optimal selection of process options, mass flow through the plant, and generated power from each plant. The formulation of the model makes it suitable for deterministic MINLP solvers

Two-phase optimizing approach to design assessments of long distance heat transportation for CHP systems

International Nuclear Information System (INIS)

Hirsch, Piotr; Duzinkiewicz, Kazimierz; Grochowski, Michał; Piotrowski, Robert

2016-01-01

Highlights: • New method for long distance heat transportation system effectivity evaluation. • Decision model formulation which reflects time and spatial structure of the problem. • Multi-criteria and complex approach to solving the decision-making problem. • Solver based on simulation-optimization approach with two-phase optimization method. • Sensitivity analysis of the optimization procedure elements. - Abstract: Cogeneration or Combined Heat and Power (CHP) for power plants is a method of putting to use waste heat which would be otherwise released to the environment. This allows the increase in thermodynamic efficiency of the plant and can be a source of environmental friendly heat for District Heating (DH). In the paper CHP for Nuclear Power Plant (NPP) is analyzed with the focus on heat transportation. A method for effectivity and feasibility evaluation of the long distance, high power Heat Transportation System (HTS) between the NPP and the DH network is proposed. As a part of the method the multi-criteria decision-making problem, having the structure of the mathematical programming problem, for optimized selection of design and operating parameters of the HTS is formulated. The constraints for this problem include a static model of HTS, that allows considerations of system lifetime, time variability and spatial topology. Thereby variation of annual heat demand within the DH area, variability of ground temperature, insulation and pipe aging and/or terrain elevation profile can be taken into account in the decision-making process. The HTS construction costs, pumping power, and heat losses are considered as objective functions. In general, the analyzed optimization problem is multi-criteria, hybrid and nonlinear. The two-phase optimization based on optimization-simulation framework is proposed to solve the decision-making problem. The solver introduces a number of assumptions concerning the optimization process. Methods for problem decomposition

Effektiv innovation

DEFF Research Database (Denmark)

Søndergaard, Katia Dupret; Brandi, Ulrik

2011-01-01

Er det vækst og udvikling eller åbenhed, videnudvikling, netværk, leg og innovation? Eller er det prisregulering, tilpasning og stærk styring, som skal gøre universiteterne til førende drivkræfter for dansk vækst?...

Effektiv ledelse?

DEFF Research Database (Denmark)

Raae, Peter Henrik

2018-01-01

Based on a psychodynamic analysis of a leadership interview, this paper discusses how public modernization initiatives have put educational leaders on terms where they handle their leadership roles by drawing on special forms of defence. This paper asks whether the demands made of ‘an effective...... leader’ can trigger defensive patterns of interaction that are even counter-productive rather than effective....

New market based price regulation on combined heat and power in Denmark

International Nuclear Information System (INIS)

Koch, Jesper; Nielsen, Marianne; Hansen, Anders B.; Lawaetz, Henrik

2003-01-01

Major economic risks can become reality when local co-generation plants (L-CHP ) meet the full market penetration with new market based price regulation. Co-generation produces more than 50% of the national electricity consumption and half of the production is generated from L-CHP. The new price regulation is assumed to take action in 2004. The paper will present an analysis of a market based price regulation on the L-CHP-sector. The paper will spotlight on L-CHP in district heating systems supplying heat for domestic purposes. When smaller and medium sized CHP sell electricity they are paid an average price of 46 Euro per MWh. The return of selling electricity shall primarily cover the expenditure of buying gas for electricity production and writing off investments cost of a CHP-plant. With the framework of today it is a fact that the plants (in average) are only slightly competitive compared to individual heat production plants. When CHP meet market conditions there is a high risk that electricity prices will be reduced significantly (prices of 20 - 30 Euro per MWh) for a longer period. Significantly reduced electricity prices will result in dramatically increased heat prices. If no action is taken there will be a potential risk that heat consumers in the smaller and medium sized cities together must pay an extra bill of 200 million Euro each year. It corresponds to an average increase of the heating bill of 300 - 500 Euro per year for an average house. This is far from acceptable. There will also be a high risk that companies with industrial CHP will permanently convert to heat only boiler and only use their CHP occasionally because CHP plants might not be cost-effective when electricity prices are low. These effects can cause a significant increase of the national CO 2 emission

Benefices environnementaux de la cogeneration d'energie en milieu hospitalier et cas de l'Hopital de Moncton

Science.gov (United States)

Kone, Diakalia

The present study aimed at assessing the environmental benefits of power management practices based on cogeneration in the particular industrial sector of hospitals and healthcare. Cogeneration power systems, also known as "Combined Heat and Power" (CHP) or Cogen, supply on-site electricity and heat from a single fuel source (natural gas in general). While the efficiency of conventional plants to produce power and heat separately is limited to about 30%, the efficiency of a CHP plant is close to 80% and can reach up to 90% in some applications (Borbely et Kreider, 2001). One of the distinctive features of hospitals is their continuous demand for both type of energy (electricity and heat), which makes them good candidate for cogeneration. However, in North America at the present time, less than 5% of hospitals run on CHP. Most are being supplied with electricity by conventional power plants, run by specialized companies, and use on-site boiler(s) to generate heat. Energy spending can reach up to 3% of an hospital's annual operational budget. There are also environmental impacts related to current energy supply and use in hospitals. For instance, the burning of fossil fuels releases greenhouse gases (GHG), which contribute to human health problems and climate change. The first objective of the study was to outline the main benefits and challenges faced by hospitals that aim at becoming their own energy co-generator, in comparison to having power and heat produced separately. Our second objective was to assess prospectively (proactively) the environmental impacts of a cogeneration plant that is being planned, but not yet operated, in a Canadian hospital. The methodology was based on literature reviews and on a case study, namely that of The Moncton Hospital (TMH)/L'Hopital de Moncton, Moncton, New Brunswick, Canada. This hospital is considered a large hospital with 375 beds and a major and expanding ambulatory care service. It is also in the process of developing a 1

Marketing opportunities for CHP electricity in a virtual power plant. Direct and indirect marketing of flexibility; Vermarktungschancen fuer KWK-Strom im virtuellen Kraftwerk. Direkte und indirekte Flexibilitaetsvermarktung

Energy Technology Data Exchange (ETDEWEB)

Otto, Achim; Baumgart, Bastian [Trianel GmbH, Aachen (Germany). Abt. Virtuelle Kraftwerke

2013-07-15

The increasingly fluctuating feed-in of electricity by means of a rapid expansion of renewable energies results in an increasing demand for flexible performance for the regulation of production and consumption. An important part of the necessary flexibility could be provided by CHP plants. Their potential of flexibility is not always fully exploited.

Optimisation of Combined Cycle Gas Turbine Power Plant in Intraday Market: Riga CHP-2 Example

Science.gov (United States)

Ivanova, P.; Grebesh, E.; Linkevics, O.

2018-02-01

In the research, the influence of optimised combined cycle gas turbine unit - according to the previously developed EM & OM approach with its use in the intraday market - is evaluated on the generation portfolio. It consists of the two combined cycle gas turbine units. The introduced evaluation algorithm saves the power and heat balance before and after the performance of EM & OM approach by making changes in the generation profile of units. The aim of this algorithm is profit maximisation of the generation portfolio. The evaluation algorithm is implemented in multi-paradigm numerical computing environment MATLab on the example of Riga CHP-2. The results show that the use of EM & OM approach in the intraday market can be profitable or unprofitable. It depends on the initial state of generation units in the intraday market and on the content of the generation portfolio.

Analysis of a CHP plant in a municipal solid waste landfill in the South of Spain

International Nuclear Information System (INIS)

Chacartegui, Ricardo; Carvalho, Monica; Abrahão, Raphael; Becerra, José

2015-01-01

The most effective strategy to manage and treat solid urban residues, with the least environmental impact as well as lowest economic and energy costs, is a challenge for sustainability in current society, who actually pay for the final management of these residues. This manuscript analyzes the potential of biogas generation in an urban solid residue treatment plant, and the potential use for cogeneration in situ at the landfill. The objective is to identify the energy potential associated with the landfill and its potential use to accelerate the evaporation of leachate through the supply of heat, reducing the risks of exceeding the collection capacity of the leachate ponds. The change in legislation for generation within the special regime in Spain (2014) introduced a sudden change in the direction of energy policies, which affected significantly the profitability of these facilities. This manuscript analyzes the application of both legislations, previous (2007) and current (2014), for the case of a cogeneration system installed in this landfill. The results obtained indicate that even with a much more restrictive legislation in force, acceptable values are obtained for the evaluation of the investment – however, better results were obtained for the previous legislation that favored the special regime. The new regulation constrains the maximum and minimum annual operating hours for landfill cogeneration. It results in relevant periods with limited use of biogas for electricity generation. Biogas storage for delayed future consumption in the same installation and biogas selling for external use in boilers are proposed as options for this biogas in excess. They can reduce greenhouse gases emissions from the non-used biogas and can improve the economic results of the facility. - Highlights: • Analysis of biogas generation capacity in an existing landfill at South of Spain. • Analysis of the integration of gas engine for cogeneration. • CHP integration for

The effectiveness of absorption heat pumps application for the increase of economic efficiency of CHP operation

Directory of Open Access Journals (Sweden)

Luzhkovoy Dmitriy S.

2017-01-01

Full Text Available The article deals with a comparative analysis of CHP operational efficiency in various working modes before and after the absorption heat pumps installation. The calculation was performed using a mathematical model of the extraction turbine PT- 80/100-130/13. Absorption heat pumps of LLC “OKB Teplosibmash” were used as AHP models for the analysis. The most effective way of absorption lithium-bromide heat pumps application as a part of the turbine PT-80/100-130/13 turned out to be their usage in a heat-producing mode during a non-heating season with a load of hot water supply. For this mode the dependence of the turbine heat efficiency on the heat load of the external consumer at a given throttle flow was analyzed.

Implementation strategy for small CHP-plants in a competitive market: the case of Lithuania

International Nuclear Information System (INIS)

Lund, H.; Siupsinskas, G.; Martinaitis, V.

2005-01-01

Within five years from now, Lithuania is going to close down Ignalina, the only nuclear-power plant in the country. Since Ignalina generates more than 75% of the Lithuanian electricity production, new generation capacities are needed. Traditional steam-turbines, fuelled with fossil fuels, would mean further imports of fuel as well as a rise in CO 2 emissions. At the same time, several small district-heating companies one suffering from high heating-prices. Typically, the price in small towns is 20-50% higher than the price in large urban areas. Consequently, alternative strategies should be considered. This article analyses the conditions for one such strategy, namely the replacement of boilers in the existing district-heating supplies with combined heat-and-power production (CHP). Compared with new power stations, fuel can be saved and CO 2 -emissions reduced. Also this strategy can be used to level the difference between low heating prices in the large urban areas and high prices in small towns and villages. (Author)

Testing and model-aided analysis of a 2 kW el PEMFC CHP-system

Science.gov (United States)

König, P.; Weber, A.; Lewald, N.; Aicher, T.; Jörissen, L.; Ivers-Tiffée, E.; Szolak, R.; Brendel, M.; Kaczerowski, J.

A prototype PEMFC CHP-system (combined heat and power) for decentralised energy supply in domestic applications has been installed in the Fuel Cell Testing Laboratory at the Institut für Werkstoffe der Elektrotechnik (IWE), Universität Karlsruhe (TH). The system, which was developed at the Zentrum für Sonnenenergie- und Wasserstoff-Forschung ZSW, Ulm (FC-stack) and the Fraunhofer-Institut für Solare Energiesysteme ISE, Freiburg (reformer) is operated and tested in close cooperation with the Stadtwerke Karlsruhe. The tests are carried out as part of the strategic project EDISon, which is supported by the German Federal Ministry of Economics and Technology (BMWA). The performance of the system is evaluated for different operating conditions. The tests include steady state measurements under different electrical and thermal loads as well as an analysis of the dynamic behaviour of the system during load changes. First results of these steady state and dynamic operation characteristics will be presented in this paper.

Sectoral Innovation Watch electrical and Optical Equipment Sector. Final sector report

NARCIS (Netherlands)

Broek, T. van den; Giessen, A.M. van der

2011-01-01

The electrical and optical equipment sector is a high-tech manufacturing sector. It is one of the most innovative sectors in Europe with investments and advances in fundamental research, applied R&D and innovation in the actual use of equipment. This sector is also one of the most global sectors

Design and analysis of permanent magnet moving coil type generator used in a micro-CHP generation system

Science.gov (United States)

Oros Pop, Susana Teodora; Berinde, Ioan; Vadan, Ioan

2015-12-01

This paper presents the design and analysis of a permanent magnet moving coil type generator driven by a free piston Stirling engine. This assemble free piston Stirling engine - permanent magnet moving coil type generator will be used in a combined heat and power (CHP) system for producing heat and power in residential area. The design procedure for moving coil type linear generator starts from the rated power imposed and finally uses the Faraday law of induction. The magneto-static magnetic field generated by permanent magnets is analyzed by means of Reluctance method and Finite Element Method in order to evaluate the magnetic flux density in the air gap, which is a design data imposed in the design stage, and the results are compared.

Optimisation of Combined Cycle Gas Turbine Power Plant in Intraday Market: Riga CHP-2 Example

Directory of Open Access Journals (Sweden)

Ivanova P.

2018-02-01

Full Text Available In the research, the influence of optimised combined cycle gas turbine unit – according to the previously developed EM & OM approach with its use in the intraday market – is evaluated on the generation portfolio. It consists of the two combined cycle gas turbine units. The introduced evaluation algorithm saves the power and heat balance before and after the performance of EM & OM approach by making changes in the generation profile of units. The aim of this algorithm is profit maximisation of the generation portfolio. The evaluation algorithm is implemented in multi-paradigm numerical computing environment MATLab on the example of Riga CHP-2. The results show that the use of EM & OM approach in the intraday market can be profitable or unprofitable. It depends on the initial state of generation units in the intraday market and on the content of the generation portfolio.

A Geothermal Energy Supported Gas-steam Cogeneration Unit as a Possible Replacement for the Old Part of a Municipal CHP Plant (TEKO

Directory of Open Access Journals (Sweden)

L. Böszörményi

2001-01-01

Full Text Available The need for more intensive utilization of local renewable energy sources is indisputable. Under the current economic circumstances their competitiveness in comparison with fossil fuels is rather low, if we do not take into account environmental considerations. Integrating geothermal sources into combined heat and power production in a municipal CHP plant would be an excellent solution to this problem. This concept could lead to an innovative type of power plant - a gas-steam cycle based, geothermal energy supported cogeneration unit.

Strandby Harbour on solar cooling. Demonstration of 8.000 m{sup 2} solar collectors combined with flue gas cooling with a absorption cooling system; Combined heat and power plant (CHP); Strandby havn paa solkoeling. Demonstration af 8.000 m{sup 2} solfangere kombineret med roeggaskoeling med absorptionskoeleanlaeg

Energy Technology Data Exchange (ETDEWEB)

Soerensen, Flemming (Strandby Varmevaerk, Strandby (Denmark)); Soerensen, Per Alex (PlanEnergi, Skoerping (Denmark)); Ulbjerg, F. (Ramboell, Odense (Denmark)); Sloth, H. (Houe and Olsen, Thisted (Denmark))

2010-04-15

The aim of the project was to demonstrate 1) high solar heating ratio (18% annually) at a decentralized natural gas combined heat and power plant; 2) increased efficiency (5% of the heat consumption) in a natural gas CHP by using an extra flue gas cooler and an absorption heat pump; 3) a double tank system where a new tank during winter is used for cooling/ heat storage for the absorption heat pump and during summer for solar heat storage in serial operation with the old tank. The concept of combining solar power, absorption cooling and natural gas-fired small-scale CHP in Strandby met expectations and could be replicated in other CHP plants. However, it is important to note that if major construction modifications in the flue gas condensation system in the boiler or engine are required, the operating hours must not be reduced significantly in the amortisation period for the conversion. (ln)

Biomass sector review for the Carbon Trust

Energy Technology Data Exchange (ETDEWEB)

NONE

2005-10-26

The review drew on an extensive number of sources, including a detailed literature survey, in-house references, questionnaires and interviews with trade associations, industry participants and industry observers. The policy observations that were drawn from the review, together with the results of the analysis itself, were subject to a detailed peer review with leading industry participants, observers and academics. The purpose of this document, is to place the results of this analysis in the public domain and to ensure that it is available to those interested in developing the biomass sector in the UK. Screening of the available biomass resource in the UK highlighted four key biomass fuels: forestry crops, dry agricultural residue, waste wood arid woody energy crops. The four fuels could have a material impact on UK energy supply when used for heat and power. Currently they have the potential to supply up to an additional. 41TWh/yr or about 1.5% of UK energy supply. In the future this could rise to c.80TWh/yr, mainly through expansion in the supply of woody energy crops and/or dry agricultural residue. If available resources are used for biofuels the level of potential carbon saving decreases significantly compared with providing heat or electricity due to lower conversion efficiency. Consequently, biofuels are not covered in depth in this report. Although the UK has a considerable amount of biomass resource, gaining access to it is not always viable for developers and end-users as the UK. currently has a relatively undeveloped biomass fuel supply infrastructure. Just as biomass can be drawn from a number or sources, it can be converted to useful energy through a number of processes and delivered to a variety of markets. Our screening of biomass conversion processes demonstrated that currently combustion represents the best area of focus. Combustion is a proven, established conversion process and the lowest cost option available today. Co-firing was not analysed

Trial operation of a phosphoric acid fuel cell (PC25) for CHP applications in Europe

Energy Technology Data Exchange (ETDEWEB)

Uhrig, M.; Droste, W.; Wolf, D. [Ruhrgas AG, Dorsten (Germany)

1996-12-31

In Europe, ten 200 kW phosphoric acid fuel cells (PAFCs) produced by ONSI (PC25) are currently in operation. Their operators collaborate closely in the European Fuel Cell Users Group (EFCUG). The experience gained from trial operation by the four German operators - HEAG, HGW/HEW, Thyssengas and Ruhrgas - coincides with that of the other European operators. This experience can generally be regarded as favourable. With a view to using fuel cells in combined heat and power generation (CHP), the project described in this report, which was carried out in cooperation with the municipal utility of Bochum and Gasunie of the Netherlands, aimed at gaining experience with the PC 25 in field operation under the specific operating conditions prevailing in Europe. The work packages included heat-controlled operation, examination of plant behavior with varying gas properties and measurement of emissions under dynamic load conditions. The project received EU funding under the JOULE programme.

Heat supply systems using natural gas in the residential sector: The case of the agglomeration of Seoul

International Nuclear Information System (INIS)

Park, Hi-Chun; Kim, Hoseok

2008-01-01

Combined heat and power (CHP) and district heating (DH) promotion policies are based on the assumption of high energy efficiencies. In the last two decades, however, there has been a big increase in energy efficiencies of combined-cycle gas power plants (CCs) including CHPs and gas-condensing boilers. This study tries to verify the validity of the assumption of high energy efficiency of DH. The experience in the agglomeration of Seoul shows that DH in combination with large modern CHPs is not more energy efficient but substantially more expensive compared to individual gas heating by efficient condensing boilers in combination with CCs. We argue that the Korean government should review its CHP/DH support programs and abandon the so-called heat supply monopoly for DH operators in newly developed residential areas. Such a policy intervention only distorts the space heating market and wastes valuable financial resources. Furthermore, the public should be properly informed on energy efficiency as well as energy- and system-related costs of various heat supply systems. In the light of the present improvements in the performance of gas-condensing boilers and CCs, the validity of the assumption of high energy efficiency of CHP/DH in other countries has to be reviewed

Energy Management for Community Energy Network with CHP Based on Cooperative Game

Directory of Open Access Journals (Sweden)

Xiaofeng Liu

2018-04-01

Full Text Available Integrated energy system (IES has received increasing attention in micro grid due to the high energy efficiency and low emission of carbon dioxide. Based on the technology of combined heat and power (CHP, this paper develops a novel operation mechanism with community micro turbine and shared energy storage system (ESS for energy management of prosumers. In the proposed framework, micro-grid operator (MGO equipped with micro turbine and ESS provides energy selling business and ESS leasing business for prosumers. Prosumers can make energy trading with public grid and MGO, and ESS will be shared among prosumers when they pay for the rent to MGO. Based on such framework, we adopt a cooperative game for prosumers to determine optimal energy trading strategies from MGO and public grid for the next day. Concretely, a cooperative game model is formulated to search the optimal strategies aiming at minimizing the daily cost of coalition, and then a bilateral Shapley value (BSV is proposed to solve the allocation problem of coalition’s cost among prosumers. To verify the effectiveness of proposed energy management framework, a practical example is conducted with a community energy network containing MGO and 10 residential buildings. Simulation results show that the proposed scheme is able to provide financial benefits to all prosumers, while providing peak load leveling for the grid.

Generic Combined Heat and Power (CHP Model for the Concept Phase of Energy Planning Process

Directory of Open Access Journals (Sweden)

Satya Gopisetty

2016-12-01

Full Text Available Micro gas turbines (MGTs are regarded as combined heat and power (CHP units which offer high fuel utilization and low emissions. They are applied in decentralized energy generation. To facilitate the planning process of energy systems, namely in the context of the increasing application of optimization techniques, there is a need for easy-to-parametrize component models with sufficient accuracy which allow a fast computation. In this paper, a model is proposed where the non-linear part load characteristics of the MGT are linearized by means of physical insight of the working principles of turbomachinery. Further, it is shown that the model can be parametrized by the data usually available in spec sheets. With this model a uniform description of MGTs from several manufacturers covering an electrical power range from 30 k W to 333 k W can be obtained. The MGT model was implemented by means of Modelica/Dymola. The resulting MGT system model, comprising further heat exchangers and hydraulic components, was validated using the experimental data of a 65 k W MGT from a trigeneration energy system.

Emerging Changes in the Worldwide Power Sector: The Assets of Thermal Power

Energy Technology Data Exchange (ETDEWEB)

Moliere, Michel; Girardot, Amelie; Jones, Robert M.

2007-07-01

In forthcoming decades we will see major changes in the landscape of the worldwide power sector as CO2 management and incipient hydrocarbon scarcity exert their increasing influence. The power generation community must be prepared to satisfy a particularly complex and challenging set of requirements. These issues include curbing CO2 emissions, coping with surging primary energy prices, and compliance with regional and local emissions requirements such as SOx and NOx-while maintaining maximum efficiency. In this context, as confirmed by International Energy Agency forecasts, thermal power will maintain a prominent position in overall power generation since it enables the large capacity additions required in emerging countries. Thanks to their reliable assets (such as energy efficiency and environment) gas turbine-based power systems, including Gas Turbine Combined Cycles (GTCC) and Combined Heat & Power (CHP), will continue to be major contributors to worldwide power generation. However, evolving changes in the spectrum of fuels will create an additional challenge for power generation equipment manufacturers-requiring innovative technologies in fuel processing, combustion, and emission controls to address these needs. This paper reviews the factors underlining the changing power generation environment worldwide, including the increasing scarcity of conventional fuels and the growing interest in biofuels and hydrogen. Insights will be offered into various technologies needed to support the growing need for increased fuel flexibility.

The indicators of energy security of decentralized heating

Directory of Open Access Journals (Sweden)

Elena Vitalyevna Bykova

2013-06-01

Full Text Available In the paper, the new additional indicators of energy security with the purpose to include decentralized heating sector is developed in the work. The structure of the housing stock of the country is analyzed, which includes different types of central heating boilers and CHP, individual gas or electric heating and stove heating.The analysis of the existing thermal supply (per unit area and per capita living for each sector is carried out. It is found that heat consumed in the residential sector with central heating from CHP and boilers is significantly higher of heat consumed in other sectors. The missing amount of heat energy, which can be produced in two ways, is calculated. Part of the deficit heat can be produced at existing sources that are not loaded enough to the nominal parameters at the moment. The second part can be obtained from small new sources (for inhabited localities that do not have a centralized heat supply infrastructure. New indicators complement the system of indicators to be used to analyze and monitoring the level of Moldova's energy security. They allowed including decentralized heat supply sector, which is not reflected in the official statistics. At the same, the calculation methodology has been improved and the overall integral indicator of the energy security level, which was even more crisis than previously thought.

Filterjord

DEFF Research Database (Denmark)

Cederkvist, Karin; Ingvertsen, Simon Toft

2010-01-01

I den bæredygtige by skal der være styr på den diffuse forurening. En veldefineret jordblanding, som både sikrer effektiv infiltration og rensning, kan håndtere forurenet regnafstrømning fra mindre veje, parkeringsarealer, m.v.......I den bæredygtige by skal der være styr på den diffuse forurening. En veldefineret jordblanding, som både sikrer effektiv infiltration og rensning, kan håndtere forurenet regnafstrømning fra mindre veje, parkeringsarealer, m.v....

Peak-interviewet

DEFF Research Database (Denmark)

Raalskov, Jesper; Warming-Rasmussen, Bent

Peak-interviewet er en særlig effektiv metode til at gøre ubevidste menneskelige ressourcer bevidste. Fokuspersonen (den interviewede) interviewes om en selvvalgt, personlig succesoplevelse. Terapeuten/coachen (intervieweren) spørger ind til processen, som ledte hen til denne succes. Herved afdæk...... fokuspersonen ønsker at tage op (nye mål eller nye processer). Nærværende workingpaper beskriver, hvad der menes med et peak-interview, peakinterviwets teoretiske fundament samt metodikken til at foretage et tillidsfuldt og effektiv peak-interview....

Lokalisering av arbeidsplasser og boliger

DEFF Research Database (Denmark)

Næss, Petter

2011-01-01

En miljømessig effektiv lokalisering av arbeidsplasser og boliger sikter mot å begrense - og helst redusere - biltrafikk og miljøproblemer knyttet til bytransport, sammenliknet med alternative lokaliseringer. En effektiv transportmessig lokalisering kan også bidra til å redusere tap av verdifulle...... arealer (f eks jordbruksareal eller natur- og friluftsområder) utenfor dagens tettstedsgrense. Tiltaket må samtidig utformes slik at en kan bevare viktige bomiljøkvaliteter og så mye som mulig av de grønne arealene innenfor tettbebyggelsen....

Factors that are influencing the economical efficiency of the CHP plants

International Nuclear Information System (INIS)

Ruieneanu, Liviu; Ion, Mircea

2004-01-01

This paper presents some factors that might influence the economical efficiency of a cogeneration plant. These factors are: the understanding of the fuel economy at consumers; - the influence of the electricity production efficiency; - the influence of exergy losses. The statistical data for different countries of Europe show that under the conditions of a deregulated liberalized market of energy the cogeneration plants have numerous financial difficulties. Even if the use of cogeneration ensures a fuel saving, if this economy it is not obvious for the consumers, those consumers might prefer for the production of heat the use of a heat only generating plant. This trend might spread rapidly if the increase of the electricity will not be present immediately in the bill of the consumers that renounce to the heat produced by the CHP plant. The method used for cost allocation on both types of energy has also a great importance, because it might facilitate the rehabilitation measures and doing so it might allow lower prices for both types of energy. Perhaps the most important factor for the economical efficiency of the plant are the exergy losses. The analysis presented above shows two things, namely: - that the electricity production has a very high price, and this cost might be lowered down by some rehabilitation measures (for example repowering); - and that the heat only plants (boilers) are not affected by the exergy losses and that's why if we analyse only the heat production, the use of cogeneration might seem inappropriate

The role of policy instruments for promoting combined heat and power production with low CO2 emissions in district heating systems

International Nuclear Information System (INIS)

Marbe, A.; Harvey, S.

2005-01-01

Policy instruments clearly influence the choice of production technologies and fuels in large energy systems, including district heating networks. Current Swedish policy instruments aim at promoting the use of biofuel in district heating systems, and at promoting electric power generation from renewable energy sources. However, there is increasing pressure to harmonize energy policy instruments within the EU. In addition, natural gas based combined cycle technology has emerged as the technology of choice in the power generation sector in the EU. This study aims at exploring the role of policy instruments for promoting the use of low CO 2 emissions fuels in high performance combined heat and power systems in the district heating sector. The paper presents the results of a case study for a Swedish district heating network where new large size natural gas combined cycle (NGCC) combined heat and power (CHP) is being built. Given the aim of current Swedish energy policy, it is assumed that it could be of interest in the future to integrate a biofuel gasifier to the CHP plant and co-fire the gasified biofuel in the gas turbine unit, thereby reducing usage of fossil fuel. The goals of the study are to evaluate which policy instruments promote construction of the planned NGCC CHP unit, the technical performance of an integrated biofuelled pressurized gasifier with or without dryer on plant site, and which combination of policy instruments promote integration of a biofuel gasifier to the planned CHP unit. The power plant simulation program GateCycle was used for plant performance evaluation. The results show that current Swedish energy policy instruments favour investing in the NGCC CHP unit. The corresponding cost of electricity (COE) from the NGCC CHP unit is estimated at 253 SEK MWh -1 , which is lower than the reference power price of 284 SEK MWh -1 . Investing in the NGCC CHP unit is also shown to be attractive if a CO 2 trading system is implemented. If the value of

Survey of controllability in decentralized CHP plants. Optimal operation of priority production units; Kortlaegning af decentrale kraftvarmevaerkers regulerbarhed. Optimal drift af prioriterede anlaeg - Teknologisk grundlag

Energy Technology Data Exchange (ETDEWEB)

NONE

2005-03-15

The present report presents results from two closely related projects, carried out in parallel, under the PSO-F and U 2002. The one project is 'Survey of controllability in de-centralized combined heat and power plants' project number PSO 4724 and is fully reported here. The other project: 'Optimal operation of priority production units, project number PSO 4712, only the part project 'Technological foundations is reported here. In project 4724 the technical conditions that matter regarding controllability of electricity production in de-centralized heat and power stations are surveyed. In this context the term controllability means how fast and to which extent the load factors of the plants can be changed. Also, is has been investigated which options are available for improving the controllability, their potentials and estimates on required investments associated. The investigation covers CHP plants having a production capacity of up to 30 MW of electricity. The main part of the de-centralized CHP plants are based on spark ignited internal combustion engines (Otto engines). Most of these engines are fuelled by natural gas and a smaller part by biogas. A minor number are gas turbines fuelled by natural gas and steam turbines in industrial applications, waste incineration plants or in combined cycle power plants. The mapping has among others consisted of a number of visits on selected different types of plants including interview with people responsible for the daily operation. From these interviews data on the actual operating strategy and technical data have been provided. In addition suppliers of engines and other equipment involved have been contacted for technical information or recommendations regarding possible changes in operation strategy. Searching the Internet has been widely used for identification of technical investigations concerning e.g. operation and maintenance of relevant equipment. Finally, substantial statistical data from

Optimal investment paths for future renewable based energy systems - Using the optimisation model Balmorel

DEFF Research Database (Denmark)

Karlsson, Kenneth Bernard; Meibom, Peter

2008-01-01

that with an oil price at 100 $/barrel, a CO2 price at40 €/ton and the assumed penetration of hydrogen in the transport sector, it is economically optimal to cover more than 95% of the primary energy consumption for electricity and district heat by renewables in 2050. When the transport sector is converted......: A model for analyses of the electricity and CHP markets in the Baltic Sea Region. 〈www.Balmorel.com〉; 2001. [1

Private sector participation in power sector in India

International Nuclear Information System (INIS)

Ranganathan, V.

1992-01-01

The Indian Government is currently thinking of allowing private sector to participate in power sector inviting private sector to generate electricity mainly from coal. The main motivation is resource mobilization from private sector, since the Plan funds are diverted to rural development away from power sector; and yet the massive expansion has to be financed. The paper analyzes the inherent difficulties and contradictions in the Government's proposal, such as co-existence of high cost private power and low cost public power, the potential goal-conflicts of private and public utilities and the constraints in raising finance. It suggests a different model in order to make the privatization proposition feasible. 12 refs

Regional virtual power plant. State of the art; Regionales virtuelles Kraftwerk. Eine Ist-Stand-Analyse

Energy Technology Data Exchange (ETDEWEB)

Seifert, Joachim; Meinzenbach, Andrea [TU Dresden (Germany). Professur fuer Gebaeudeenergietechnik und Waermeversorgung; Hartan, Joerg [VNG Gasspeicher GmbH, Leipzig (Germany). Fachgruppe fuer Automatisierung und Prozessleittechnik; Schegner, Peter [TU Dresden (Germany). Inst. fuer Elektrische Energieversorgung und Hochspannungstechnik; Rehkopf, Andreas [TU Bergakademie Freiberg (Germany). Inst. fuer Automatisierungstechnik

2013-04-15

The politically and socially desired rearrangement of the energy sector in Germany becomes very challenging for the regional and national utility company. In particular, the integration of renewable energy sources into the power structures is mentioned. The activities mainly focus on the electric power sector. Under this aspect, the contribution under consideration reports on two current research projects. These research projects look for solutions in order to operate micro-CHP systems in the network in addition to the isolated operation.

Biomass gasification systems for residential application: An integrated simulation approach

International Nuclear Information System (INIS)

Prando, Dario; Patuzzi, Francesco; Pernigotto, Giovanni; Gasparella, Andrea; Baratieri, Marco

2014-01-01

The energy policy of the European member States is promoting high-efficiency cogeneration systems by means of the European directive 2012/27/EU. Particular facilitations have been implemented for the small-scale and micro-cogeneration units. Furthermore, the directive 2010/31/EU promotes the improvement of energy performance of buildings and use of energy from renewable sources for the building sector. In this scenario, systems based on gasification are considered a promising technological solution when dealing with biomass and small scale systems. In this paper, an integrated approach has been implemented to assess the energy performance of combined heat and power (CHP) systems based on biomass gasification and installed in residential blocks. The space-heating loads of the considered building configurations have been simulated by means of EnergyPlus. The heat load for domestic hot water demand has been calculated according to the average daily profiles suggested by the Italian and European technical standards. The efficiency of the whole CHP system has been evaluated supplementing the simulation of the gasification stage with the energy balance of the cogeneration set (i.e., internal combustion engine) and implementing the developed routines in the Matlab-Simulink environment. The developed model has been used to evaluate the primary energy saving (PES) of the CHP system compared to a reference case of separate production of heat and power. Economic analyses are performed either with or without subsidizations for the generated electricity. The results highlight the capability of the integrated approach to estimate both energy and economic performances of CHP systems applied to the residential context. Furthermore, the importance of the generated heat valorisation and the proper system sizing have been discussed. - Highlights: • CHP system based on biomass gasification to meet household energy demand is studied. • Influence of CHP size and operation time on

Generic model of a community-based microgrid integrating wind turbines, photovoltaics and CHP generations

International Nuclear Information System (INIS)

Ma, Xiandong; Wang, Yifei; Qin, Jianrong

2013-01-01

Highlights: ► Proposes a generic microgrid model comprising hybrid distributed generation units. ► Examines DG performance due to both environmental condition changes and electrical faults. ► Addresses island and grid connected modes of operation for DG units. ► We demonstrate the feasibility of the proposed residential microgrid system. - Abstract: Development and deployment of low-carbon energy technologies has been a national strategy of both the UK and China for a number of years, including the use of renewable generation technologies and the improvement of energy efficiency of operations and activities. The paper addresses several issues of generic importance to a residential microgrid system such as network modelling, advanced control and integration of intelligent monitoring techniques. The system, comprising representative distributed generation technologies of photovoltaics, wind turbines and combined heat and power, has been simulated by PSCAD/EMTDC under different operational scenarios. Studies include the effect of environmental condition changes, control systems and power electronics on wind turbines and PV cells, and the mixture of wind/solar/CHP energy generation under dominance of each technology. The performance and dynamics of the system are examined against symmetrical and asymmetrical electrical faults to seek an optimal isolation and restoration of the distributed generation unit from the connected grid system. Modelling these system interactions has demonstrated the feasibility of the proposed residential microgrid system

Techno-economic performance analysis of bio-oil based Fischer-Tropsch and CHP synthesis platform

International Nuclear Information System (INIS)

Ng, Kok Siew; Sadhukhan, Jhuma

2011-01-01

The techno-economic potential of the UK poplar wood and imported oil palm empty fruit bunch derived bio-oil integrated gasification and Fischer-Tropsch (BOIG-FT) systems for the generation of transportation fuels and combined heat and power (CHP) was investigated. The bio-oil was represented in terms of main chemical constituents, i.e. acetic acid, acetol and guaiacol. The compositional model of bio-oil was validated based on its performance through a gasification process. Given the availability of large scale gasification and FT technologies and logistic constraints in transporting biomass in large quantities, distributed bio-oil generations using biomass pyrolysis and centralised bio-oil processing in BOIG-FT system are technically more feasible. Heat integration heuristics and composite curve analysis were employed for once-through and full conversion configurations, and for a range of economies of scale, 1 MW, 675 MW and 1350 MW LHV of bio-oil. The economic competitiveness increases with increasing scale. A cost of production of FT liquids of 78.7 Euro/MWh was obtained based on 80.12 Euro/MWh of electricity, 75 Euro/t of bio-oil and 116.3 million Euro/y of annualised capital cost. -- Highlights: → Biomass to liquid process and gas to liquid process synthesis. → Biorefinery economic analysis. → Pyrolysis oil to biofuel. → Gasification and Fischer-Tropsch. → Process integration, pinch analysis and energy efficiency.

Short Summary European Reports on Retail Sector, Motor Vehicle Repair and Sales Sector, Food and Beverages Sector.

Science.gov (United States)

European Centre for the Development of Vocational Training, Berlin (Germany).

This document is composed of European synthesis reports on retail trade, the agro-food sector, and the motor vehicle sales and repair sector. They are based on the most important findings of the European report and the 12 national reports for each sector. Section 1, "Retail Sector," deals in part 1 with the structure of retailing in the…

Clinical review of supracricoid laryngectomy with CHEP and CHP. 50 patients treated in 11 years

International Nuclear Information System (INIS)

Nakayama, Meijin; Seino, Yutomo; Hayashi, Seiichi; Miyamoto, Shunsuke; Takeda, Masahiko; Masaki, Takashi; Yokobori, Satoru; Okamoto, Makito

2009-01-01

An analysis of clinical data on 50 patients undergoing supracricoid laryngectomy (SCL) between 1997 and 2008 id est (i.e.), cricohyoidoepiglottopexy (CHEP) in 47 and cricohyoidopexy (CHP) in 3 cases showed that the number of SCL cases operated on within a year surpassed that of Total Laryngectomy after 2003. Selection criteria included performance status 0-1 and blood gas PO2>80 torr, especially in those patients over 70 years old. Postoperative wound infection occurred in 16 patients (32%), with four requiring additional surgical intervention (two ruptured pexis and two chondritis induced by C3-C4 osteophytes). A history of radiotherapy and systemic complications, i.e., diabetes and renal failure, added to the risk of wound infection. Introducing a clinical pathway shortened hospitalization. Vocal function was achieved in 96% and swallowing function in 89% of patients. Five-year crude survival in CHEP was 69% and in total laryngectomy (TL) 51%. Laryngeal preservation was 70%, increasing to 89% after the introduction of SCL. SCL-CHEP is thus indicated for unfavorable T2 (ASCO 2006), well-selected T3, T4, and rT1-4 (radiation failures). Effort should emphasize a good balance in prognosis and function in organ preservation for laryngeal cancer. (author)

Impact of private sector credit on the real sector of Nigeria

Directory of Open Access Journals (Sweden)

Aliyu Mamman, Ph.D

2013-07-01

Full Text Available The real sector is a strategic component of an economy because it produces and distributes tangible goods and services required to satisfy aggregate demand in the economy. For this reason, there is the need for adequate credit flow from the banking industry to the real sector, which in the Nigerian case, the credit flow has been grossly inadequate. This study is carried out to examine the impact of credit to private sector (CPS on the real sector of Nigeria with a view to assess the significant contribution of CPS to real sector growth in Nigeria. The study used aggregate time series data from 1986 to 2010, which was drawn from central bank of Nigeria (CBN statistical bulletin and CBN annual report and statement of accounts. The data was analysed using multiple regression and based on the coefficient of determination (R square, the study reveals a 96.1% variation between the CPS and real sector growth in Nigeria. The study cocludes that there is a statistically significant impact of credit to private sector on the real sector of Nigeria. This, suggest that the performance of the real sector is greatly influence by credit to private sector. The study recommends that the federal government of Nigeria through the central bank of Nigeria (CBN should enhance the financing of the real sector as well as improve credit flow to the sector because of its strategic importance in creating and generating growth of the economy.

Structural change and inter-sectoral mobility in a two-sector economy

International Nuclear Information System (INIS)

Antoci, Angelo; Galeotti, Marcello; Iannucci, Gianluca; Russu, Paolo

2015-01-01

This paper studies the dynamics of a two-sector economy (with a natural resource-dependent sector and an industrial sector) characterized by free inter-sectoral labor mobility and heterogeneity of agents (workers and entrepreneurs). In such a context, we analyze the effects of the deterioration of natural resources, caused by the production activity of both sectors, on inter-sectoral movements of the labor force (structural changes), on ecological dynamics and on the revenues of workers and entrepreneurs. As in the seminal work by Matsuyama (1992), we obtain that a low productivity of labor in the resource-dependent sector can fuel the industrialization process. However, differently from Matsuyama, in our model the industrialization process may give rise to a reduction in workers’ revenues if the contribution to environmental depletion of the industrial sector, per unit of product, is higher than that of the resource-dependent one.

Microbiological Contamination at Workplaces in a Combined Heat and Power (CHP Station Processing Plant Biomass

Directory of Open Access Journals (Sweden)

Justyna Szulc

2017-01-01

Full Text Available The aim of the study was to evaluate the microbial contamination at a plant biomass processing thermal power station (CHP. We found 2.42 × 103 CFU/m3 of bacteria and 1.37 × 104 CFU/m3 of fungi in the air; 2.30 × 107 CFU/g of bacteria and 4.46 × 105 CFU/g of fungi in the biomass; and 1.61 × 102 CFU/cm2 bacteria and 2.39 × 101 CFU/cm2 fungi in filtering facepiece respirators (FFRs. Using culture methods, we found 8 genera of mesophilic bacteria and 7 of fungi in the air; 10 genera each of bacteria and fungi in the biomass; and 2 and 5, respectively, on the FFRs. Metagenomic analysis (Illumina MiSeq revealed the presence of 46 bacterial and 5 fungal genera on the FFRs, including potential pathogens Candida tropicalis, Escherichia coli, Prevotella sp., Aspergillus sp., Penicillium sp.. The ability of microorganisms to create a biofilm on the FFRs was confirmed using scanning electron microscopy (SEM. We also identified secondary metabolites in the biomass and FFRs, including fumigaclavines, quinocitrinines, sterigmatocistin, and 3-nitropropionic acid, which may be toxic to humans. Due to the presence of potential pathogens and mycotoxins, the level of microbiological contamination at workplaces in CHPs should be monitored.

Operating Experiences with a Small-scale CHP Pilot Plant based on a 35 kWel Hermetic Four Cylinder Stirling Engine for Biomass Fuels

DEFF Research Database (Denmark)

Biedermann, F.; Carlsen, Henrik; Schoech, M.

2003-01-01

Within the scope of the RD&D project presented a small-scale CHP plant with a hermetic four cylinder Stirling engine for biomass fuels was developed and optimised in cooperation with the Technical University of Denmark, MAWERA Holzfeuerungsanlagen GesmbH, an Austrian biomass furnace and boiler...... exchanger of the Stirling engine, of the air preheater and of the entire combustion system. Furthermore, the optimisation of the pneumatic cleaning system to reduce ash deposition in the hot heat exchanger is of great relevance....... manufacturer, and BIOS BIOENERGIESYSTEME GmbH, an Austrian development and engineering company. Based on the technology developed, a pilot plant was designed and erected in Austria. The nominal electric power output of the plant is 35 kWel and the nominal thermal output amounts to approx. 220 kWth. The plant...

From Public to Private Sector: Motives and Explanations for Sector Switching

DEFF Research Database (Denmark)

Hansen, Jesper Rosenberg

2014-01-01

Sector switching is interesting in relation to understanding how to get and keep people working in the public sector as well as to understand public and private differences. This paper focuses on why public employees leave public organizations to work in the private sector. We use a design studying...... higher educated Danish employees who recently worked in the state, comparing those who shift job to another public organization with those who switch to the private sector. We focus on different motives for job shifts which may influence sector switching such as salary, job security, organizational...... characteristics and public service motivation....

Second sector cool down

CERN Multimedia

2007-01-01

At the beginning of July, cool-down is starting in the second LHC sector, sector 4-5. The cool down of sector 4-5 may occasionally generate mist at Point 4, like that produced last January (photo) during the cool-down of sector 7-8.Things are getting colder in the LHC. Sector 7-8 has been kept at 1.9 K for three weeks with excellent stability (see Bulletin No. 16-17 of 16 April 2007). The electrical tests in this sector have got opt to a successful start. At the beginning of July the cryogenic teams started to cool a second sector, sector 4-5. At Point 4 in Echenevex, where one of the LHC’s cryogenic plants is located, preparations for the first phase of the cool-down are underway. During this phase, the sector will first be cooled to 80 K (-193°C), the temperature of liquid nitrogen. As for the first sector, 1200 tonnes of liquid nitrogen will be used for the cool-down. In fact, the nitrogen circulates only at the surface in the ...

National Accounts Energy Alliance : Field test and verification of CHP components and systems

Energy Technology Data Exchange (ETDEWEB)

Sweetser, R. [Exergy Partners Corporation, Herndon, VA (United States)

2003-07-01

Exergy is a consulting firm which specializes in capitalizing on opportunities that result from the nexus of utility deregulation and global climate change in both the construction and energy industries. The firm offers assistance in technical business and market planning, product development and high impact marketing and technology transfer programs. The author discussed National Accounts Energy Alliance (NAEA) program on distributed energy resources (DER) and identified some advantageous areas such as homeland security (less possible terrorist targets to be protected), food safety (protection of food supply and delivery system), reliability, power quality, energy density, grid congestion and energy price. In the future, an essential role in moderating energy prices for commercial buildings will probably be played by distributed generation (DG) and combined heat and power (CHP). The technical merits of these technologies is being investigated by national accounts and utilities partnering with non-profit organizations, the United States Department of Energy (US DOE), state governments and industry. In that light, in 2001 an Alliance program was developed, which allows investors to broaden their knowledge from the application and verification of Advanced Energy Technologies. This program was the result of a synergy between the American Gas Foundation and the Gas Technology Institute (GTI), and it assists investors with their strategic planning. It was proven that a customer-led Energy Technology Test and Verification Program (TA and VP) could be cost-effective and successful. The NAEA activities in five locations were reviewed and discussed. They were: (1) Russell Development, Portland, Oregon; (2) A and P-Waldbaums, Hauppage, New York; (3) HEB, Southern, Texas; (4) Cinemark, Plano, Texas; and McDonald's, Tampa, Florida. 4 tabs., figs.

The concept of system for chips production need to work demo CHP plant in company 'AGROSAVA' from Šimanovci

Directory of Open Access Journals (Sweden)

Dedić Aleksandar Đ.

2014-01-01

Full Text Available In this paper according to the calculation of chips productivity needs for gasification in the demo CHP plant for co-generation: electricity and heat, chippers were analyzed due to: the type of mobility, running for chipping and the method of delivering chips to temporary yard. The plant was planned to generate electricity power up to 200kWelec. First, in consideration were taken the chippers with medium capacity, which mainly served for chipping brushwood and leaves that remain after harvest plantations on mostly flat terrain and parks. Later, the comparative characteristics of the world's three largest manufacturers of machinery for the production of wood chips significantly larger amounts (up to 30m3/h were given. These chippers were particularly suitable for the higher density of crops and stationed yard, in which brushwood would be brought and chip. At the end, the types of convective dryers were analyzed that could be successfully used for drying wood chips (drum and pneumatic dryer and based on the calculation proposed the types of dryers that were available in the local market.

Cyclical absenteeism among private sector, public sector and self-employed workers.

Science.gov (United States)

Pfeifer, Christian

2013-03-01

This research note analyzes differences in the number of absent working days and doctor visits and in their cyclicality between private sector, public sector and self-employed workers. For this purpose, I used large-scale German survey data for the years 1995 to 2007 to estimate random effects negative binomial (count data) models. The main findings are as follows. (i) Public sector workers have on average more absent working days than private sector and self-employed workers. Self-employed workers have fewer absent working days and doctor visits than dependent employed workers. (ii) The regional unemployment rate is on average negatively correlated with the number of absent working days among private and public sector workers as well as among self-employed men. The correlations between regional unemployment rate and doctor visits are only significantly negative among private sector workers. Copyright © 2012 John Wiley & Sons, Ltd.

Agriculture Sectors

Science.gov (United States)

The Agriculture sectors comprise establishments primarily engaged in growing crops, raising animals, and harvesting fish and other animals. Find information on compliance, enforcement and guidance on EPA laws and regulations on the NAICS 111 & 112 sectors.

Biomass polygeneration - technology state-of-the-art, systems and policy instruments; Bioenergikombinat - tekniktrender, system och styrmedel

Energy Technology Data Exchange (ETDEWEB)

Gode, Jenny; Hagberg, Linus; Holmgren, Kristina; Stripple, Haakan

2007-09-15

The development status of biofuel technologies and pellets has been reviewed, with focus on the possibilities for polygeneration with combined heat and power (CHP). Policy instruments important for the development of polygeneration plants have been analysed and interviews with potential stakeholders have been carried out. Fermentation of biomass for ethanol production, gasification and conversion to synthesis gas, biodiesel production from vegetable and animal oils, as well as anaerobic digestion for biogas production are examples of common biofuel technologies. Some of these are commercially available whereas others require further development. Substantial research and development is also spent to develop new technologies for biofuel production. Biofuel production can often benefit from integration with CHP resulting in increased efficiency and energy balances. The potentials for integration vary between different biofuels, but the most common options are integration with respect to the raw material, heat demand, waste heat and waste products. The integration potential for pellets is mainly associated with the raw material and the heat demand for drying of the raw material. Integration of biofuel and/or pellets production with CHP might increase the potential for power production since a new heat customer is provided the whole year around. The heat demand for some biofuels and for pellets can be covered by district heating, whereas some biofuels require steam. Policy instruments can strongly influence the development of biofuels and thereby has a potential to affect the incentives for investments in polygeneration. From a climate point of view, it can be argued that biomass is better used for emission reductions in other sectors where higher reduction of greenhouse gases can be achieved to a lower cost. However, there are other driving forces that motivate increased use of biofuels, such as security of supply, need of revised agriculture policy and reduction of

Sectoral Innovatiohn Performance in the Biotechnology Sector. Final Report. Task 1

NARCIS (Netherlands)

Enzing, C.M.; Valk, T. van der

2010-01-01

In general the biotechnology sector can be qualified as a science driven and high tech sector. This applies for both the group of biotech start-ups that are present in each of the three sub-sectors (red biotech: health/pharma, green biotech: agrifood and white biotech: chemicals) as for the red

Sectoral panorama: the electric power sector in Europe

International Nuclear Information System (INIS)

Mons, L.

2003-10-01

This study takes stock on the main european markets to help the electric power companies in their decisions and investments. The first part presents the electric power sector structure in Europe. The second part is devoted to the market evolution for the different european markets (german, french, british, italian and spanish) with an analysis of the retail prices, the competition and the evolution perspectives. The third part presents the highlights in the electric power sector between 2001 and the middle of 2003. The enterprises management and strategies are presented in the fourth part. In the last part the document analyzes the financial performances of the sector and the electric power companies. (A.L.B.)

Sectoral Innovation Watch Biotechnology Sector. Final sector report

NARCIS (Netherlands)

Enzing, C.

2011-01-01

Biotechnology has evolved from a single set of technologies in the mid 1970s into a full grown technological field that is the driving force in innovation processes in many industrial sectors (pharmaceutical, medical, agriculture, food, chemical, environment, instruments). Nowadays, biotechnology is

Development of a fuel flexible, air-regulated, modular, and electrically integrated SOFC-system (FlameSOFC)

Energy Technology Data Exchange (ETDEWEB)

Voss, S.; Trimis, D. [TU Bergakademie Freiberg (Germany). Inst. of Thermal Engineering; Valldorf, J. [VDI/VDE Innovation + Technik GmbH (Germany)

2010-07-01

The present paper summarizes experimental results from the operation of the SOFC based micro-CHP unit developed within the framework of the project FlameSOFC. The project is co-financed by the European Commission as an Integrated Project within the 6{sup th} framework program. The objective is the development of an innovative SOFC-based micro-CHP system capable of operating with different gaseous and liquid fuels and fulfilling the technological and market requirements at a European level. The partners involved in the FlameSOFC project bring together a sufficient number of important European actors on the scientific, research and industry level including SMEs and industrial partners from the heating sector. The presented work concerns the operation of the 2{sup nd} phase prototype FlameSOFC system, with a 1 kW{sub el.} SOFC stack and natural gas as feedstock. (orig.)

Economic Multipliers and Sectoral Linkages: Ghana and the New Oil Sector

Directory of Open Access Journals (Sweden)

Dennis Nchor

2016-01-01

Full Text Available The study seeks to assess the structure of the economy of Ghana in terms of changes in the economic structure before and after the production of oil in commercial quantities. This is viewed with regards to economic multipliers, sectoral interdependence and trade concentration. The results show that changes occurred with regards to multipliers and sectoral interdependence. The output multipliers of most sectors have declined. The results also show that the agricultural sector experienced an initial decline in its growth while industry experienced an increase. The performance of the services sector was relatively stable for the period covered by the study. There is a decline in the level of trade concentration though on a whole the concentration index is still high. The study employed input-output modeling techniques and the data was obtained from the Ghana statistical service and the World Development Indicators.

El sector productivo The productive sector

Directory of Open Access Journals (Sweden)

Encarna Santolaria

2004-05-01

Full Text Available El crecimiento del sector servicios en detrimento del sector primario, la flexibilidad del mercado laboral y la progresiva incorporación de la mujer a dicho mercado son los cambios más destacados del sector productivo español en los últimos 25 años. Las mujeres en España presentan tasas de desempleo, trabajo temporal y a tiempo parcial mucho mayores que los hombres. Además, las condiciones de acceso al mercado de trabajo y las condiciones en las que éste se desempeña están también muy relacionadas con la clase social. Las mujeres cubren la escasez de servicios públicos destinados al cuidado de las criaturas pequeñas y de las personas mayores o dependientes, y realizan una labor de cuidadoras informales sin reconocimiento social, lo cual les impide el acceso a un puesto de trabajo o su mantenimiento y limita de forma decisiva las posibilidades de desarrollo y progreso profesional. Todo ello indica una clara diferencia con respecto a los hombres en cuanto a la frecuencia de contratos temporales y de tiempo parcial, así como en la segregación laboral, tanto horizontal como vertical. Estos aspectos de segregación son más evidentes en las mujeres de clases sociales menos privilegiadas, en las que se concentran las peores condiciones de acceso al mercado laboral y de trabajo. En España es imprescindible llevar a cabo políticas que ofrezcan servicios que permitan compatibilizar la vida laboral y familiar en condiciones de mayor equidad, tanto en razón de género como de clase social.In the last 25 years, the production sector in Spain has undergone important changes. Among these changes, the important growth of the services sector at the expense of the primary sector, the increasing flexibility of the labour market, and the rise in the female workforce could be considered as the most relevant ones. Spanish women have higher rates of unemployment, temporary jobs and part time contracts than Spanish men. Moreover, job access and work

Modeling and off-design performance of a 1 kWe HT-PEMFC (high temperature-proton exchange membrane fuel cell)-based residential micro-CHP (combined-heat-and-power) system for Danish single-family households

DEFF Research Database (Denmark)

Arsalis, Alexandros; Nielsen, Mads Pagh; Kær, Søren Knudsen

2011-01-01

A novel proposal for the modeling and operation of a micro-CHP (combined-heat-and-power) residential system based on HT-PEMFC (High Temperature-Proton Exchange Membrane Fuel Cell) technology is described and analyzed to investigate its commercialization prospects. An HT-PEMFC operates at elevated...... temperatures, as compared to Nafion-based PEMFCs and therefore can be a significant candidate for cogeneration residential systems. The proposed system can provide electric power, hot water, and space heating for a typical Danish single-family household. A complete fuel processing subsystem, with all necessary...

Opportunities for Combined Heat and Power in Data Centers

Energy Technology Data Exchange (ETDEWEB)

Darrow, Ken [ICF International; Hedman, Bruce [ICF International

2009-03-01

Data centers represent a rapidly growing and very energy intensive activity in commercial, educational, and government facilities. In the last five years the growth of this sector was the electric power equivalent to seven new coal-fired power plants. Data centers consume 1.5% of the total power in the U.S. Growth over the next five to ten years is expected to require a similar increase in power generation. This energy consumption is concentrated in buildings that are 10-40 times more energy intensive than a typical office building. The sheer size of the market, the concentrated energy consumption per facility, and the tendency of facilities to cluster in 'high-tech' centers all contribute to a potential power infrastructure crisis for the industry. Meeting the energy needs of data centers is a moving target. Computing power is advancing rapidly, which reduces the energy requirements for data centers. A lot of work is going into improving the computing power of servers and other processing equipment. However, this increase in computing power is increasing the power densities of this equipment. While fewer pieces of equipment may be needed to meet a given data processing load, the energy density of a facility designed to house this higher efficiency equipment will be as high as or higher than it is today. In other words, while the data center of the future may have the IT power of ten data centers of today, it is also going to have higher power requirements and higher power densities. This report analyzes the opportunities for CHP technologies to assist primary power in making the data center more cost-effective and energy efficient. Broader application of CHP will lower the demand for electricity from central stations and reduce the pressure on electric transmission and distribution infrastructure. This report is organized into the following sections: (1) Data Center Market Segmentation--the description of the overall size of the market, the size and

The French nuclear sector. Situation and predictions 2018 - Sectoral and competitive analysis

International Nuclear Information System (INIS)

2017-01-01

This document comprises two reports. A first one, published and updated three times a year, and a second one which is a yearly publication. The first one, based on an analysis of market perspectives and of actor strategies, proposes a synthesis on the consequences of the evolution of the economic environment, on major trends noticed for the nuclear sector, and on predictable evolutions. It proposes the most recent data regarding the activities of more than 100 firms belonging to the sector (notably in terms of electric power production, of turnover for firms specialised in nuclear maintenance or in the fuel cycle). It highlights recent events for companies of the sector: takeovers, investments, restructuring, introduction of new products, and so on. It proposes a sector-based dashboard which contains all the critical figures useful to analyse the sector situation (activity determining factors, key figures for the sector and its environment). The annual report proposes a general presentation of the sector (determining factors of the activity, operated nuclear plants in the world, nuclear power production in the world, uranium production and consumption in the world, maintenance and improvement expenses on nuclear plants, electric power consumption and shares in power generation by different sources in France), an analysis of the evolution of the sector activity (trends, indicators, financial performance of actors in the maintenance of nuclear plants), an overview of important issues for the profession (growth issue despite the maturity of the French market, implications of intensification of foreign competition, of higher safety requirements, and of a decrease of nuclear energy profitability), and an analysis of the sector economic structure (turnovers, personnel, position of France among world exporters, equipment export structure, key figures for nuclear maintenance). The last part proposes presentations of 20 French actors and data and information sheets for 10

Study on solid phase extraction and graphite furnace atomic absorption spectrometry for the determination of nickel, silver, cobalt, copper, cadmium and lead with MCI GEL CHP 20Y as sorbent

International Nuclear Information System (INIS)

Yang Guangyu; Fen Weibo; Lei Chun; Xiao Weilie; Sun Handong

2009-01-01

A solid phase extraction and graphite furnace atomic absorption spectrometry (GFAAS) for the determination of nickel, silver, cobalt, copper, cadmium and lead with MCI GEL CHP 20Y as sorbent was studied. Trace amounts of chromium, nickel, silver, cobalt, copper, cadmium and lead were reacted with 2-(2-quinolinil-azo)-4-methyl-1,3-dihydroxidobenzene (QAMDHB) followed by adsorption onto MCI GEL CHP 20Y solid phase extraction column, and 1.0 mol L -1 HNO 3 was used as eluent. The metal ions in 300 mL solution can be concentrated to 1.0 mL, representing an enrichment factor of 300 was achieved. The recoveries of analytes at pH 8.0 with 1.0 g of resin were greater than 95% without interference from alkaline, earth alkaline and some metal ions. When detected with graphite furnace atomic absorption spectrometry, the detection limits in the original samples were 1.4 ng L -1 for Cr(III), 1.0 ng L -1 for Ni(II), 0.85 ng L -1 for Ag(I), 1.2 ng L -1 for Co(II), 1.0 ng L -1 for Cu(II), 1.2 ng L -1 for Cd(II) and 1.3 ng L -1 for Pb(II). The validation of the procedure was performed by the analysis of the certified standard reference materials, and the presented procedure was applied to the determination of analytes in biological, water and soil samples with good results (recoveries range from 89 to 104%, and R.S.D.% lower than 3.2%. The results agreed with the standard value or reference method)

Life cycle assessment of biomass-to-energy systems in Ireland modelled with biomass supply chain optimisation based on greenhouse gas emission reduction

International Nuclear Information System (INIS)

Murphy, Fionnuala; Sosa, Amanda; McDonnell, Kevin; Devlin, Ger

2016-01-01

The energy sector is the major contributor to GHG (greenhouse gas emissions) in Ireland. Under EU Renewable energy targets, Ireland must achieve contributions of 40%, 12% and 10% from renewables to electricity, heat and transport respectively by 2020, in addition to a 20% reduction in GHG emissions. Life cycle assessment methodology was used to carry out a comprehensive, holistic evaluation of biomass-to-energy systems in 2020 based on indigenous biomass supply chains optimised to reduce production and transportation GHG emissions. Impact categories assessed include; global warming, acidification, eutrophication potentials, and energy demand. Two biomass energy conversion technologies are considered; co-firing with peat, and biomass CHP (combined heat and power) systems. Biomass is allocated to each plant according to a supply optimisation model which ensures minimal GHG emissions. The study shows that while CHP systems produce lower environmental impacts than co-firing systems in isolation, determining overall environmental impacts requires analysis of the reference energy systems which are displaced. In addition, if the aims of these systems are to increase renewable energy penetration in line with the renewable electricity and renewable heat targets, the optimal scenario may not be the one which achieves the greatest environmental impact reductions. - Highlights: • Life cycle assessment of biomass co-firing and CHP systems in Ireland is carried out. • GWP, acidification and eutrophication potentials, and energy demand are assessed. • Biomass supply is optimised based on minimising GHG emissions. • CHP systems cause lower environmental impacts than biomass co-firing with peat. • Displacing peat achieves higher GHG emission reductions than replacing fossil heat.

The impact of lignocellulosic ethanol yields in polygeneration with district heating – A case study

International Nuclear Information System (INIS)

Starfelt, Fredrik; Daianova, Lilia; Yan, Jinyue; Thorin, Eva; Dotzauer, Erik

2012-01-01

Highlights: ► We model a system with ethanol, power and district heating production. ► Different ethanol yields are investigated from an overall system perspective. ► Yields of ethanol production have less importance for the profitability of the plant. -- Abstract: The development towards high energy efficiency and low environmental impact from human interactions has led to changes at many levels of society. As a result of the introduction of penalties on carbon dioxide emissions and other economic instruments, the energy industry is striving to improve energy efficiency and climate mitigation by switching from fossil fuels to renewable fuels. Biomass-based combined heat and power (CHP) plants connected to district heating networks have a need to find uses for the excess heat they produce in summer when the heat demand is low. On the other hand, the transport sector makes a substantial contribution to the increasing CO 2 emissions, which have to be reduced. One promising alternative to address these challenging issues is the integration of vehicle fuel production with biomass-based CHP plants. This paper presents the configuration and operating profits in terms of electricity, heat and ethanol fuel from cellulosic biomass. A case study of a commercial small scale CHP plant was conducted using simulation and modeling tools. The results clearly show that electricity production can be increased when CHP production is integrated with cellulosic ethanol production. The findings also show that the economic benefits of the energy system can be realized with near-term commercially available technology, and that the benefits do not rely solely on ethanol yields.

Public Sector Expatriate Managers:

DEFF Research Database (Denmark)

Fenner, Charles, R., Jr.; Selmer, Jan

2008-01-01

Although public sector expatriates are becoming increasingly common, research on them is very limited. There is reason to believe that the situation for expatriates from the public sector may be different than for those from the private sector. This study investigated U.S. Department of Defense a...

Multi-sectoral action for child safety-a European study exploring implicated sectors.

Science.gov (United States)

Scholtes, Beatrice; Schröder-Bäck, Peter; Förster, Katharina; MacKay, Morag; Vincenten, Joanne; Brand, Helmut

2017-06-01

Injury to children in Europe, resulting in both death and disability, constitutes a significant burden on individuals, families and society. Inequalities between high and low-income countries are growing. The World Health Organisation Health 2020 strategy calls for inter-sectoral collaboration to address injury in Europe and advocates the whole of government and whole of society approaches to wicked problems. In this study we explore which sectors (e.g. health, transport, education) are relevant for four domains of child safety (intentional injury, water, road and home safety). We used the organigraph methodology, originally developed to demonstrate how organizations work, to describe the governance of child safety interventions. Members of the European Child Safety Alliance, working in the field of child safety in 24 European countries, drew organigraphs of evidence-based interventions. They included the different actors involved and the processes between them. We analyzed the organigraphs by counting the actors presented and categorizing them into sectors using a pre-defined analysis framework. We received 44 organigraphs from participants in 24 countries. Twenty-seven sectors were identified across the four domains. Nine of the 27 identified sectors were classified as 'core sectors' (education, health, home affairs, justice, media, recreation, research, social/welfare services and consumers). This study reveals the multi-sectoral nature of child safety in practice. It provides information for stakeholders working in child safety to help them implement inter-sectoral child safety interventions taking a whole-of-government and whole-of-society approach to health governance. © The Author 2017. Published by Oxford University Press on behalf of the European Public Health Association. All rights reserved.

Torus sector handling system

International Nuclear Information System (INIS)

Grisham, D.L.

1981-01-01

A remote handling system is proposed for moving a torus sector of the accelerator from under the cryostat to a point where it can be handled by a crane and for the reverse process for a new sector. Equipment recommendations are presented, as well as possible alignment schemes. Some general comments about future remote-handling methods and the present capabilities of existing systems will also be included. The specific task to be addressed is the removal and replacement of a 425 to 450 ton torus sector. This requires a horizontal movement of approx. 10 m from a normal operating position to a point where its further transport can be accomplished by more conventional means (crane or floor transporter). The same horizontal movement is required for reinstallation, but a positional tolerance of 2 cm is required to allow reasonable fit-up for the vacuum seal from the radial frames to the torus sector. Since the sectors are not only heavy but rather tall and narrow, the transport system must provide a safe, stable, and repeatable method fo sector movement. This limited study indicates that the LAMPF-based method of transporting torus sectors offers a proven method of moving heavy items. In addition, the present state of the art in remote equipment is adequate for FED maintenance

Industrial innovation and intra sectoral and inter sectoral technology diffusion; Innovacion industrial y difusion tecnological intrasectorial e intersectorial

Energy Technology Data Exchange (ETDEWEB)

Serrano Domingo, G.; Cabrera Borras, B.; Requena Silvente, F.

2012-07-01

This paper examines whether sectoral backward and forward linkages can generate positive externalises in sectoral innovation through diffusion of technological knowledge, both across countries within a sector or across sectors within a country. Using a sample of 14 OECD countries and 12 sectors over the period 1995-2005 we find that forward linkages enhance sectoral innovation. Intra sectoral slipovers are important among sectors and countries with low-to-medium R an D intensity while inter sectoral slipovers have a major impact on sectors with high R and D intensity. (Author)

INTRODUCTION OF A SECTORAL APPROACH TO TRANSPORT SECTOR FOR POST-2012 CLIMATE REGIME

Directory of Open Access Journals (Sweden)

Atit TIPPICHAI

2009-01-01

Full Text Available Recently, the concept of sectoral approaches has been discussed actively under the UNFCCC framework as it could realize GHG mitigations for the Kyoto Protocol and beyond. However, most studies have never introduced this approach to the transport sector explicitly or analyzed its impacts quantitatively. In this paper, we introduce a sectoral approach which aims to set sector-specific emission reduction targets for the transport sector for the post-2012 climate regime. We suppose that developed countries will commit to the sectoral reduction target and key developing countries such as China and India will have the sectoral no-lose targets — no penalties for the failure to meet targets but the right to sell exceeding reductions — for the medium term commitment, i.e. 2013–2020. Six scenarios of total CO2 emission reduction target in the transport sector in 2020, varying from 5% to 30% reductions from the 2005 level are established. The paper preliminarily analyzes shares of emission reductions and abatement costs to meet the targets for key developed countries including the USA, EU-15, Russia, Japan and Canada. To analyze the impacts of the proposed approach, we generate sectoral marginal abatement cost (MAC curves by region through extending a top-down economic model, namely the AIM/CGE model. The total emission reduction targets are analyzed against the developed MAC curves for the transport sector in order to obtain an equal marginal abatement cost which derives optimal emission reduction for each country and minimizes total abatement cost. The results indicate that the USA will play a crucial role in GHG mitigations in the transport sector as it is most responsible for emission reductions (i.e. accounts for more than 70% while Japan will least reduce (i.e. accounts for about 3% for all scenarios. In the case of a 5% reduction, the total abatement is equal to 171.1 MtCO2 with a total cost of 1.61 billion USD; and in the case of a 30

Energy and economic analysis of an ICE-based variable speed-operated micro-cogenerator

Energy Technology Data Exchange (ETDEWEB)

Caresana, Flavio; Bartolini, Carlo Maria [Universita Politecnica delle Marche, Dipartimento di Energetica, Via Brecce Bianche, Ancona (AN) 60100 (Italy); Brandoni, Caterina [Universita Telematica e-Campus, Ingegneria Energetica, Via Isimbardi 10, Novedrate (CO) 22060 (Italy); Feliciotti, Petro [Universita Politecnica delle Marche, Dipartimento di Ingegneria Informatica, Gestionale e dell' Automazione, Via Brecce Bianche, Ancona (AN) 60100 (Italy)

2011-03-15

Micro-combined heat and power (CHP) systems are a key resource to meet the EUCO{sub 2} reduction agreed in the Kyoto Protocol. In the near future they are likely to spread significantly through applications in the residential and service sectors, since they can provide considerably higher primary energy efficiencies than plants generating electricity and heat separately. A 28 kW{sub e} natural gas, automotive-derived internal combustion engine CHP system was modeled with a view to comparing constant and variable speed operation modes. Besides their energy performances, the paper addresses the major factors involved in their economic evaluation and describes a method to assess their economic feasibility. Typical residential and service sector applications were chosen as test cases and the results discussed in terms of energy performances and of profitability. They showed that interesting savings can be obtained with respect to separate generation, and that they are higher for the household application in variable speed operating conditions. In fact the plant's energy performance is greatly enhanced by the possibility, for any given power, to regulate the engine's rotational speed. From the economic viewpoint, despite the higher initial cost of the variable speed concept, the system involves a shorter pay-back period and ensures greater profit. (author)

Energy and economic analysis of an ICE-based variable speed-operated micro-cogenerator

International Nuclear Information System (INIS)

Caresana, Flavio; Brandoni, Caterina; Feliciotti, Petro; Bartolini, Carlo Maria

2011-01-01

Micro-combined heat and power (CHP) systems are a key resource to meet the EUCO 2 reduction agreed in the Kyoto Protocol. In the near future they are likely to spread significantly through applications in the residential and service sectors, since they can provide considerably higher primary energy efficiencies than plants generating electricity and heat separately. A 28 kW e natural gas, automotive-derived internal combustion engine CHP system was modeled with a view to comparing constant and variable speed operation modes. Besides their energy performances, the paper addresses the major factors involved in their economic evaluation and describes a method to assess their economic feasibility. Typical residential and service sector applications were chosen as test cases and the results discussed in terms of energy performances and of profitability. They showed that interesting savings can be obtained with respect to separate generation, and that they are higher for the household application in variable speed operating conditions. In fact the plant's energy performance is greatly enhanced by the possibility, for any given power, to regulate the engine's rotational speed. From the economic viewpoint, despite the higher initial cost of the variable speed concept, the system involves a shorter pay-back period and ensures greater profit.

Impact analysis of leading sub sector on basic sector to regional income in Siak Regency, Riau Province

Science.gov (United States)

Astuti, P.; Nugraha, I.; Abdillah, F.

2018-02-01

During this time Siak regency only known as oil producing regency in Riau province, but based on the vision of spatial planning Siak’s regency in 2031 there was a shift from petroleum towards to other sectors such as agribusiness, agroindustry and tourism. The purpose of this study was to identify the sector base, the leading subsectors and shift with their characteristics and to identify the leading subsectors development priority. The method used in this research consisted of the method of Location Quotient (LQ, Shift Share, and Overlay method). The research results were used Location Quotient (LQ) to identify sector’s base in Siak regency based on the document of PDRB. The sector’s refers to the constant prices year of 2000 were mining and quarrying sector (2.25). The sector’s base using document of PDRB at constant prices 2000 without oil and gas sector was the agricultural sector with a value of LQ was 2,45. The leading sub sector in the Siak regency with mining and quarrying sector was oil and gas (1.02) and leading sub sector without oil and gas sector was the plantation sector (1.48) and forestry sector (1.73). Overlay analysis results shown that agriculture sector as a sector base and plantation and forestry as a leading sub sector has positive value and categorize as progressive and competitiveness. Because of that, this leading sub sector gets high priority to developing.

Energy sector alliances

International Nuclear Information System (INIS)

McQuade, Owen

1998-09-01

Contains Executive Summary and Chapters on: A changing energy sector; Rationale for the joint venture, merger or acquisition; Mergers, acquisitions and joint ventures by sector; The joint venture process; Key factors for success; Financing the venture; Case studies; The future outlook. (Author)

Cross-sector Innovation

DEFF Research Database (Denmark)

Würtz Jessen, Søren; Linnet, Andreas; Tscherning, Rasmus Wiinstedt

2013-01-01

The aim of this handbook is to help improve your opportunities for getting started on innovative and business development projects that reach beyond your own sector, commonly known as ’Cross-sector innovation’, or ’Cross innovation’ for short. We believe that there is a need for an easily read...... innovation handbook that can reach out to all sectors and potential partners whose point of departure, language use and understanding of customers is often very different to that of businesses. These differences constitute a resource for business development. If exploited they can lead to new ways of doing...... things and help us breakaway from the lull of the modes of expression and methods ‘customarily’ employed in business development. The handbook focuses on the interaction of “traditional’ businesses and sectors that belong to those known as the creative and the experience industries, i.e. designers...

Economic and technical factors affecting the development of decentralized CHP in Latvia

International Nuclear Information System (INIS)

Klavs, G.; Turlajs, D.

1997-01-01

This paper describes the development and usage of the Energy Flow Optimisation Model (EFOM-ENV) in Latvia. The model is used to analyze and evaluate different scenarios for the power sector development in Latvia. Important study objectives have been the penetration of the new technologies, and the impact of imported electricity price changes. (author)

Role of Manufacturing Sector and Trade, Hotel, Restaurant Sector In East Java’s Economy: Input Output Analysis

Directory of Open Access Journals (Sweden)

Anggari Marya Kresnowati

2016-11-01

Full Text Available This study aimed to (1 analyze the relationship the manufacturing sector and the trade, hotel, and restaurant sector with other sectors in East Java, (2 to analyze the economic impact caused the two sectors based on the multiplier effect, (3 and analyze the economic impact caused by these two sectors if there additional investment funds. This study uses data analysis input output 2010 East Java 19x19 aggregation sector.The results indicate that base metals subsector has the highest linkages to other sectors. Based on household income multiplier effect, trade subsector has the greatest multiplier. Employment multiplier in trade and industrial sectors are in medium rank. This is indicates that the labor has been absorbed well in both sectors. The output multiplier effect, subsector non-metal goods, except petroleum and coal has the highest multiplier. The last, according to the analysis of investment injection simulations Input-Output East Java in 2010, subsector other processing industries has a best value added. Overall, the manufacturing sector has a better influence to East Java's economy than trade, hotel, and restaurant sector.

Oszacowanie efektów zewnętrznych stosowania wybranych OZE w elektrociepłowni, w kontekście spełniania celów środowiskowych

OpenAIRE

Ciechelska, Agnieszka; Pol, Małgorzata Maria

2015-01-01

Estimating the effects of external application of selected renewable energy source using in the power plant, in the context of meeting the environmental objectives Increasing problems associated with greenhouse gas emissions, resource management, and increasing the amount of municipal waste generated, causing tightening of environmental regulations, and these in turn need to search for new solutions. One of the biggest CO2 emitters and consumers of non-renewable resource is the CHP sector, wh...

SECTORAL SHARES AND ECONOMIC GROWTH

DEFF Research Database (Denmark)

Ahmad, Nisar; Naveed, Amjad; Naz, Amber

2013-01-01

believe that structural change is an unimportant side effect of the economic development. On the contrary, economists associated with the World Bank and some others posit that growth is brought about by the changes in sectoral composition. The objective of this study is to empirically test...... the relationship between sectoral shares and economic growth by using the panel data for 20 developed countries. The results of the granger causality suggest that both services and agriculture sectors do granger cause economic growth, whereas industrial sector does not granger cause growth. Reverse causality does...... not hold for any of the three sectors. The results of Barro and Non-Barro regressions along with the set of control variables have suggested that services sector is negatively affecting growth, whereas both industrial and agriculture shares are positively affect economic growth....

GHG REDUCTION POTENTIAL OF BIOGAS RESOURCE UTILZATION IN HOLBÆK’S HEATING AND ELECTRICITY SECTOR

OpenAIRE

DAO, THI THU HUONG DIU

2013-01-01

This project is set out to identify the GHG reduction potentials of the 3 identified biogas plants in the Holbæk municipality. The GHG reduction of the 3 plants will be calculated in association with 2 biogas applications, which are CHP and upgrading biogas for individual heating purposes. The GHG reduction potentials of the 3 plants will be reflected to Holbæk’s specific GHG reduction target to see how these potentials contribute to the set goal. Departure from that, future version of biogas...

Unionism Comes to the Public Sector

OpenAIRE

Richard B. Freeman

1984-01-01

This paper argues that public sector labor relations is best understood in a framework that focuses on unions' ability to shift demand curves rather than to raise wages, as is the case in the private sector. It reviews the public sector labor relations literature and finds that: (i) public sector unionism has flourished as a result of changes in laws; (2) the effects of public sector unions on wages are likely to have been underestimated; (3) public sector unions have a somewhat different eff...

Digital innovation

DEFF Research Database (Denmark)

2012-01-01

Valg af materiale/medie/form: Filmmediet Valg af arbejdsform: Formidling Begrundelse for valg af materiale/medie/form/arbejdsform: Filmmediet er valgt, da det er en effektiv måde at præsentere et komplekst emne på....

Sectoral Innovation Watch Food and Drinks Sector. Final Sector Report

NARCIS (Netherlands)

Leis, M.; Gijsbers, G.; Zee, F. van der

2011-01-01

The food and drinks manufacturing industry is a diverse and complex sector. There are ample possibilities for performance improvement and innovation in the food and drinks industry as well as a variety of challenges ranging from a lack of financial and human resources, fragmented consumer interests

The emerging fourth sector

OpenAIRE

Friis, Andreas

2009-01-01

The Fourth Sector is a new phenomenon related to dual social and financial value creation, until now not clearly defined with crisp sectoral boundaries and an operationalized definition. The phenomenon is getting increased attention in media, conferences, business schools and by organizations all over the world, and this study intends to explain the macroenvironmental changes that led to the rise of the fourth sector, describe new trends of social value creation in the private ...

Private sector participation in the electricity sector : potential and critical issues

International Nuclear Information System (INIS)

Dunsky, I.

2006-01-01

This presentation discussed the development of infrastructure in the electricity sector with particular reference to public-private partnerships and project finance. Emerging markets that encourage private-sector investment were presented along with recommendations to negotiate power purchase agreements involving small-scale hydroelectric power; a thermal power plant at Suroit, Quebec; and, wind energy in Quebec's Gaspe Peninsula. Interconnection to the provincial power grid was also reviewed with reference to the risk faced by the promoters of a project in terms of project design, construction, financing, production and maintenance. The risks faced by Hydro-Quebec were also discussed along with risk allocations between the private and public sectors. tabs., figs

Life cycle analysis of distributed concentrating solar combined heat and power: economics, global warming potential and water

Science.gov (United States)

Norwood, Zack; Kammen, Daniel

2012-12-01

We report on life cycle assessment (LCA) of the economics, global warming potential and water (both for desalination and water use in operation) for a distributed concentrating solar combined heat and power (DCS-CHP) system. Detailed simulation of system performance across 1020 sites in the US combined with a sensible cost allocation scheme informs this LCA. We forecast a levelized cost of 0.25 kWh-1 electricity and 0.03 kWh-1 thermal, for a system with a life cycle global warming potential of ˜80 gCO2eq kWh-1 of electricity and ˜10 gCO2eq kWh-1 thermal, sited in Oakland, California. On the basis of the economics shown for air cooling, and the fact that any combined heat and power system reduces the need for cooling while at the same time boosting the overall solar efficiency of the system, DCS-CHP compares favorably to other electric power generation systems in terms of minimization of water use in the maintenance and operation of the plant. The outlook for water desalination coupled with distributed concentrating solar combined heat and power is less favorable. At a projected cost of 1.40 m-3, water desalination with DCS-CHP would be economical and practical only in areas where water is very scarce or moderately expensive, primarily available through the informal sector, and where contaminated or salt water is easily available as feed-water. It is also interesting to note that 0.40-1.90 m-3 is the range of water prices in the developed world, so DCS-CHP desalination systems could also be an economical solution there under some conditions.

Regional transport sector mitigation options

Energy Technology Data Exchange (ETDEWEB)

Zhou, Peter [EECG Consultants, Gaborone (Botswana)

1998-10-01

The rationale for conducting climate change mitigation studies in the transport sector is on the premise that: The transport sector is the second largest consumer of fossil fuels in the region; The regional transport sector is an area with high opportunity for infrastructural development under UNFCCC financial mechanism; The regional transport sector is crucial in the SADC region for trade and coupled with the Trade Protocol will play a major role in development hence the need to make it efficient in terms of energy demand and provision of services; The sector offers many mitigation options but with a challenge to evaluate their energy saving and GHG saving potential and yet there is need to quantify possible emission reduction for possible future emission trading. This is also a sector with potential to qualify for financing through Clean Development Mechanism (CDM) recently stipulated in the Kyoto Protocol. (au)

Regional transport sector mitigation options

International Nuclear Information System (INIS)

Zhou, Peter

1998-01-01

The rationale for conducting climate change mitigation studies in the transport sector is on the premise that: The transport sector is the second largest consumer of fossil fuels in the region; The regional transport sector is an area with high opportunity for infrastructural development under UNFCCC financial mechanism; The regional transport sector is crucial in the SADC region for trade and coupled with the Trade Protocol will play a major role in development hence the need to make it efficient in terms of energy demand and provision of services; The sector offers many mitigation options but with a challenge to evaluate their energy saving and GHG saving potential and yet there is need to quantify possible emission reduction for possible future emission trading. This is also a sector with potential to qualify for financing through Clean Development Mechanism (CDM) recently stipulated in the Kyoto Protocol. (au)

The gas market and sector in France. Situation and predictions 2018 - Sector and competitive analysis

International Nuclear Information System (INIS)

2017-01-01

Through a detailed analysis of market determining factors, of evolutions of supply and demand, and of major events in firms life, this set of two reports proposes an analysis of the recent situation of the gas sector and of the evolutions of the competitive game. The first report on situation and predictions which is updated three times a year, proposes a synthesis on the consequences of the evolution of the economic environment, on major trends noticed for the sector, and on predictable evolutions. It proposes the most recent predictions regarding natural gas consumption in France and the turnover of the gas sector. It highlights recent events for companies of the sector: takeovers, investments, restructuring, introduction of new products, and so on. It proposes a sector-based dashboard which contains all the critical figures useful to analyse the sector situation (activity determining factors, key figures for the sector and its environment). The second report (the annual one) proposes an overview of trends and competition within the gas sector. It gives an overview of some basic aspects of the activity (sector organisation, gas categories, main customer markets, gas consumption in industry), and of its determining factors, analyses the sector environment (sites connected to the natural gas network, evolution of average temperatures in France, production by chemical industry, by the food industry, and by metallurgy and oil refining, thermal production of electricity, regulatory evolution regarding supports to energy efficiency, and new opportunities). The evolution of the sector activity is analysed through its trends and indicators (turnovers, gas consumption, butane-propane deliveries, wholesale prices, regulated tariffs). The economic structure is also analysed: aspects related to the upstream part (extraction, injection of biogas, natural gas main input and output points, transport and storage, natural gas distribution), and aspects related to gas provision

Sectoral Innovation Watch Retail and Wholesale Trade Sector. Final sector report

NARCIS (Netherlands)

Schaffers, H.; Rubalcaba, L.; Merino, F.; Giesecke, S.; Schaper-Rinkel, P.; Velsing, E.J.; Montalvo, C.

2011-01-01

The retail and wholesale trade sector traditionally is considered as a poor innovator. Innovation is seen as driven mostly by applications of information and communication technology (ICT). This report adopts a more comprehensive definition of innovation than the traditional one, taking into account

Development and Testing of the Advanced CHP System Utilizing the Off-Gas from the Innovative Green Coke Calcining Process in Fluidized Bed

Energy Technology Data Exchange (ETDEWEB)

Chudnovsky, Yaroslav [Gas Technology Inst., Des Plaines, IL (United States); Kozlov, Aleksandr [Gas Technology Inst., Des Plaines, IL (United States)

2013-08-15

Green petroleum coke (GPC) is an oil refining byproduct that can be used directly as a solid fuel or as a feedstock for the production of calcined petroleum coke. GPC contains a high amount of volatiles and sulfur. During the calcination process, the GPC is heated to remove the volatiles and sulfur to produce purified calcined coke, which is used in the production of graphite, electrodes, metal carburizers, and other carbon products. Currently, more than 80% of calcined coke is produced in rotary kilns or rotary hearth furnaces. These technologies provide partial heat utilization of the calcined coke to increase efficiency of the calcination process, but they also share some operating disadvantages. However, coke calcination in an electrothermal fluidized bed (EFB) opens up a number of potential benefits for the production enhancement, while reducing the capital and operating costs. The increased usage of heavy crude oil in recent years has resulted in higher sulfur content in green coke produced by oil refinery process, which requires a significant increase in the calcinations temperature and in residence time. The calorific value of the process off-gas is quite substantial and can be effectively utilized as an “opportunity fuel” for combined heat and power (CHP) production to complement the energy demand. Heat recovered from the product cooling can also contribute to the overall economics of the calcination process. Preliminary estimates indicated the decrease in energy consumption by 35-50% as well as a proportional decrease in greenhouse gas emissions. As such, the efficiency improvement of the coke calcinations systems is attracting close attention of the researchers and engineers throughout the world. The developed technology is intended to accomplish the following objectives: - Reduce the energy and carbon intensity of the calcined coke production process. - Increase utilization of opportunity fuels such as industrial waste off-gas from the novel

Do sector-specific shocks explain aggregate fluctuations?

DEFF Research Database (Denmark)

Busato, Francesco; Girardi, Alessandro; Argentiero, Amedeo

-sector productivity fluctuations.(ii) Cross-sector technology shocks have very little explanatory power on productivity andemployment, while cross-sector non-technology shocks explain more than 60 percent of employmentthat is reallocated across sector; this suggests that the shocks’ transmission mechanism....... Thenon-durable sector may follow a standard RBC model, while the durable sector should incorporateconsumption habit formation....

Perceptions of the Third Sector

NARCIS (Netherlands)

Bekkers, R.H.F.P.; Brink Lund, A.

2014-01-01

How do citizens in Europe view third sector organizations? How can differences in perceptions of the third sector among citizens in Europe be explained? And how is the third sector assessed therein with regard to its contribution to social innovation? Based on the limited scope of the evidence

Bureaucratic reform, informal sector and welfare

OpenAIRE

Chaudhuri, Sarbajit; Mandal, Biswajit

2012-01-01

In this paper we formulate a three-sector general equilibrium model where one sector produces a service or good used as an intermediate input in two other sectors. Intermediate input here resembles bureaucratic (in)efficiency/control, red-tapism etc. in light of these concerns we introduce informal sector where wage is determined through competitive mechanism. We show that informal wage must go up if bureaucratic efficiency increases in general or if informal sector becomes less prone to bure...

Agricultural sector

International Nuclear Information System (INIS)

Ainul Hayati Daud; Hazmimi Kasim

2010-01-01

The applications of nuclear technology in agriculture sector cover the use of the technology at every aspects of agricultural activity, starting from the seed to harvesting as well as the management of plantations itself. In this sector, a total of 55 entities comprising 17 public agencies and 38 private companies were selected for the study. Almost all, 91 % of them are located in Peninsular Malaysia; the rest operates in Sabah and Sarawak. The findings of the study in the public agencies and private companies are presented in the next sections. (author)

Responsible leader behavior in health sectors.

Science.gov (United States)

Longest, Beaufort

2017-02-06

Purpose The purpose of this paper is to expand attention to responsible leader behavior in the world's health sectors by explaining how this concept applies to health sectors, considering why health sector leaders should behave responsibly, reviewing how they can do so, and asserting potential impact through an applied example. Design/methodology/approach This paper is a viewpoint, reflecting conceptualizations rooted in leadership literature which are then specifically applied to health sectors. A definition of responsible leader behavior is affirmed and applied specifically in health sectors. Conceptualizations and viewpoints about practice of responsible leader behavior in health sectors and potential consequences are then discussed and asserted. Findings Leadership failures and debacles found in health, but more so in other sectors, have led leadership researchers to offer insights, many of them empirical, into the challenges of leadership especially by more clearly delineating responsible leader behavior. Practical implications Much of what has been learned in the research about responsible leader behavior offers pathways for health sector leaders to more fully practice responsible leadership. Social implications This paper asserts and provides a supporting example that greater levels of responsible leader behavior in health sectors hold potentially important societal benefits. Originality/value This paper is the first to apply emerging conceptualizations and early empirical findings about responsible leader behavior specifically to leaders in health sectors.

Sector Information Data Set

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — Fishing sectors were established in the Greater Atlantic region in 2010 under catch share management initiatives. Sector data kept at GARFO is mostly a collection of...

Public sector pay in the UK

OpenAIRE

Cribb, Jonathan; Emmerson, Carl; Sibieta, Luke

2014-01-01

This report looks at trends in public sector pay and compares these with what has been happening in the private sector. We start by analysing the overall levels of public and private sector pay, including how they have evolved over recent years and the differences after accounting for the different composition of the public and private sector workforces. We then examine how the difference between pay in the public and private sector varies across different groups of workers and areas of the c...

Sectoral Innovation Foresight. Electrical and Optical Equipment Sector. Final report. Task 2

NARCIS (Netherlands)

Broek, T. van den; Giessen, A.M. van der

2010-01-01

The goal of this study is to highlight possible future developments of importance to the electrical and optical (E&O) equipment sector, paying particular importance to ‘radical’ changes and discussing policy options and future scenarios. The electrical & optical equipment sector plays a vital role

Leading sector development in Muaro Jambi District

Directory of Open Access Journals (Sweden)

Muhammad Safri

2017-09-01

Full Text Available Efforts to improve economic development and economic growth of Muaro Jambi Regency is a must. Efforts to increase economic development and economic growth can occur, if local governments are able to determine or identify priority sectors or become a base sector. Given the importance of determining and defining the right and correct strategy in the development of leading economic sectors/bases, it is necessary to conduct further study related to the development of leading sector policy in Muaro Jambi Regency. Analysis tools that are used are LQ (Location Quotient and SWOT analysis. The results of the analysis found that of there are three sectors that are the main sector or base in Muaro Jambi Regency, namely agriculture, livestock, plantation, fishery and forestry sector, mining and quarrying sector and manufacturing industry sector. Strategies that can be done in order to maintain and develop the sector and sub-sectors/recommended base there are several alternative strategies that combine internal environmental conditions and external environment Muaro Jambi Regency is S - O (power against opportunities, S - T (power against threats W - O (weakness to opportunity and W - T (weakness to threat. Keywords: Location Quotient, SWOT Analysis, Base Sector

The benefit of regional diversification of cogeneration investments in Europe: A mean-variance portfolio analysis

Energy Technology Data Exchange (ETDEWEB)

Westner, Guenther, E-mail: guenther.westner@eon-energie.co [E.ON Energy Projects GmbH, Arnulfstrasse 56, 80335 Munich (Germany); Madlener, Reinhard, E-mail: rmadlener@eonerc.rwth-aachen.d [Institute for Future Energy Consumer Needs and Behavior (FCN), Faculty of Business and Economics/E.ON Energy Research Center, RWTH Aachen University, Mathieustrasse 6, 52074 Aachen (Germany)

2010-12-15

The EU Directive 2004/8/EC, concerning the promotion of cogeneration, established principles on how EU member states can support combined heat and power generation (CHP). Up to now, the implementation of these principles into national law has not been uniform, and has led to the adoption of different promotion schemes for CHP across the EU member states. In this paper, we first give an overview of the promotion schemes for CHP in various European countries. In a next step, we take two standard CHP technologies, combined-cycle gas turbines (CCGT-CHP) and engine-CHP, and apply exemplarily four selected support mechanisms used in the four largest European energy markets: feed-in tariffs in Germany; energy efficiency certificates in Italy; benefits through tax reduction in the UK; and purchase obligations for power from CHP generation in France. For contracting companies, it could be of interest to diversify their investment in new CHP facilities regionally over several countries in order to reduce country and regulatory risk. By applying the Mean-Variance Portfolio (MVP) theory, we derive characteristic return-risk profiles of the selected CHP technologies in different countries. The results show that the returns on CHP investments differ significantly depending on the country, the support scheme, and the selected technology studied. While a regional diversification of investments in CCGT-CHP does not contribute to reducing portfolio risks, a diversification of investments in engine-CHP can decrease the risk exposure. - Research highlights: {yields}Preconditions for CHP investments differ significantly between the EU member states. {yields}Regional diversification of CHP investments can reduce the total portfolio risk. {yields}Risk reduction depends on the chosen CHP technology.

Comparing public and private sector switchers

DEFF Research Database (Denmark)

Frederiksen, Anders; Hansen, Jesper Rosenberg; Bozeman, Barry

are related to sector switching and the pattern of sector switch, public to private versus private to public. We propose a life stage model arguing that people's needs change in different life stages of their lives. We further suggest that this can help explain why they switch sector. We use unique Danish...... labor market data that include information on all employees in Denmark (both private and public sector). The data are for the period 1980 to 2006, and this longitudinal database includes abundant information about job changes, including sector switching. Our findings indicate mixed support....... Finally, we find that people with more education are likely to switch from private to public sector....

Relational differences in interpersonal communication during third sector and public sector work

DEFF Research Database (Denmark)

Frederiksen, Dennis Jim

-going establishment and negotiation of interpersonal relations always takes place (Madsen, 1996). Using pragmatic speech act theory (Alrø & Kristiansen, 2006; Searle, 1969; Vagle, Sandvik, & Svennevig, 1993), the aim is to gain insight into the relation building in the two types of work and to show how micro level...... they are not interested in (Scheibel, 2014). The debate seems to boil down to a concern, that people doing volunteer work in the third sector, would loose their motivation to volunteer, if their work was like working in the public sector. As a contribution to this debate, this paper will examine the role interpersonal...... organisational communication can play in understanding how working in the third sector can differ from working in the public sector. This is based on Ryan & Deci who argue that the way people relate to other people and consequently communicate with them, plays a key role in their motivation for conducting...

Contribution to a Danish action plan for development and demonstration of CHP from solid biomass; Oplaeg til en national handlingsplan for udvikling og demonstration indenfor kraftvarme fra fast biomasse

Energy Technology Data Exchange (ETDEWEB)

Hansen, Morten Tony

2011-01-15

The report is the contribution from the industry to an action plan for development and demonstration of CHP technology for solid biomass. The report aims to serve as inspiration and basis for administrators and applicants of Danish funding schemes for development and demonstration in future tenders. Although Danish-based cogeneration technologies for solid biofuels are advanced compared to the competitors in many areas there is a large need to continuously improve the technology by sustained development and demonstration activities. The aim is to overcome the technological barriers that this project has identified and thus maintain competitiveness. The industry currently has very strong focus on market deployment of especially technologies for cogeneration in small scale (up to 15 MW thermal power) and on the overall economy of these plants. Reference installations that displays many operational hours with a reasonable economy, are crucial for investors. Currently, no companies market commercial plants that have sufficiently low costs to operate under Danish conditions and few do for the conditions found internationally. Thus, from the industry perspective there is still a need for development and demonstration of CHP technology below 15 MW thermal. The analysis does not exclude any technology tracks, but the development and demonstration efforts should lead to improvements in conditions such as availability, efficiencies and operating and maintenance costs. Also technologies for large plants and systems need to be improved with respect to availability and efficiency and reduced operating and maintenance costs. For all technologies, there is a need to develop the use of special solid biofuels that on the one hand may have troublesome characteristics but on the other may help lower operating costs. The Danish-based companies have good opportunities to find support for the development and demonstration effort. A number of support programs and pools are in place and

Sectoral patterns versus firm-level heterogeneity - The dynamics of eco-innovation strategies in the automotive sector

DEFF Research Database (Denmark)

Faria, Lourenco; Andersen, Maj Munch

2017-01-01

analysis using patent data from 1965 to 2012. Our findings suggest a process of co-evolution of firms' strategies and indicate that strong sectoral-specific patterns of eco-innovation are present in this sector from the mid-2000s onwards. For fuel cells technologies, however, we observe the formation......This paper sheds light on some important but underestimated elements of green industrial dynamics: the evolution of firms' eco-innovation strategies and activities within a sector. While eco-innovation sectoral case studies have taken place before, our analysis is distinct in investigating the rate......, direction and extent of eco-innovation in the automotive sector, represented here by the main automakers, in order to identify possibly sectoral-specific patterns in firms' strategies, as opposed to divergent strategic behaviors, grounded on evolutionary economic theory. We conduct a two-step empirical...

Higgs Portal into Hidden Sectors

CERN Multimedia

CERN. Geneva

2007-01-01

Several attractive theoretical ideas suggest the existence of one or more 'hidden sectors' consisting of standard model singlet fields, some of which may not be too heavy. There is a profound reason to think that the Higgs sector might provide the first access to these hidden sectors. This scenario could affect Higgs phenomenology in drastic ways.

Aid and sectoral growth

DEFF Research Database (Denmark)

Selaya, Pablo; Thiele, Rainer

2010-01-01

This article examines empirically the proposition that aid to poor countries is detrimental for external competitiveness, giving rise to Dutch disease type effects. At the aggregate level, aid is found to have a positive effect on growth. A sectoral decomposition shows that the effect is (i......) significant and positive in the tradable and the nontradable sectors, and (ii) equally strong in both sectors. The article thus provides no empirical support for the hypothesis that aid reduces external competitiveness in developing countries. A possible reason for this finding is the existence of large idle...

Canada's hydrogen energy sector

International Nuclear Information System (INIS)

Kimmel, T.B.

2009-01-01

Canada produces the most hydrogen per capita of any Organization of Economic Cooperation and Development (OECD) country. The majority of this hydrogen is produced by steam methane reforming for industrial use (predominantly oil upgrading and fertilizer production). Canada also has a world leading hydrogen and fuel cell sector. This sector is seeking new methods for making hydrogen for its future energy needs. The paper will discuss Canada's hydrogen and fuel cell sector in the context of its capabilities, its demonstration and commercialization activities and its stature on the world stage. (author)

IDEA Clean Energy Application Center

Energy Technology Data Exchange (ETDEWEB)

Thornton, Robert P. [International District Energy Association, Westborough, MA (United States)

2013-12-20

The DOE Clean Energy Application Centers were launched with a goal of focusing on important aspects of our nation’s energy supply including Efficiency, Reliability and Resiliency. Clean Energy solutions based on Combined Heat & Power (CHP), District Energy and Waste Heat Recovery are at the core of ensuring a reliable and efficient energy infrastructure for campuses, communities, and industry and public enterprises across the country. IDEA members which include colleges and universities, hospitals, airports, downtown utilities as well as manufacturers, suppliers and service providers have long-standing expertise in the planning, design, construction and operations of Clean Energy systems. They represent an established base of successful projects and systems at scale and serve important and critical energy loads. They also offer experience, lessons learned and best practices which are of immense value to the sustained growth of the Clean Energy sector. IDEA has been able to leverage the funds from the project award to raise the visibility, improve the understanding and increase deployment CHP, District Energy and Waste Heat Recovery solutions across the regions of our nation, in collaboration with the regional CEAC’s. On August 30, 2012, President Obama signed an Executive Order to accelerate investments in industrial energy efficiency (EE), including CHP and set a national goal of 40 GW of new CHP installation over the next decade IDEA is pleased to have been able to support this Executive Order in a variety of ways including raising awareness of the goal through educational workshops and Conferences and recognizing the installation of large scale CHP and district energy systems. A supporting key area of collaboration has involved IDEA providing technical assistance on District Energy/CHP project screenings and feasibility to the CEAC’s for multi building, multi-use projects. The award was instrumental in the development of a first-order screening

Industrial sector

International Nuclear Information System (INIS)

Ainul Hayati Daud; Hazmimi Kasim

2010-01-01

The industrial sector is categorized as related to among others, the provision of technical and engineering services, supply of products, testing and troubleshooting of parts, systems and industrial plants, quality control and assurance as well as manufacturing and processing. A total of 161 entities comprising 47 public agencies and 114 private companies were selected for the study in this sector. The majority of the public agencies, 87 %, operate in Peninsular Malaysia. The remainders were located in Sabah and Sarawak. The findings of the study on both public agencies and private companies are presented in subsequent sections of this chapter. (author)

Rehabilitation in Parkinson’s Disease

DEFF Research Database (Denmark)

Rose, Martin Høyer

Parkinsons sygdom (PD) er en progredierende neurodegenerativ sygdom med gradvis udvikling af motoriske og non-motoriske symptomer. Dopaminerg behandling udgør en effektiv symptomatisk behandlingsform, men indebærer risiko for langtidsbivirkninger i form af svært behandlelige fluktuationer i...

Abelian hidden sectors at a GeV

International Nuclear Information System (INIS)

Morrissey, David E.; Poland, David; Zurek, Kathryn M.

2009-01-01

We discuss mechanisms for naturally generating GeV-scale hidden sectors in the context of weak-scale supersymmetry. Such low mass scales can arise when hidden sectors are more weakly coupled to supersymmetry breaking than the visible sector, as happens when supersymmetry breaking is communicated to the visible sector by gauge interactions under which the hidden sector is uncharged, or if the hidden sector is sequestered from gravity-mediated supersymmetry breaking. We study these mechanisms in detail in the context of gauge and gaugino mediation, and present specific models of Abelian GeV-scale hidden sectors. In particular, we discuss kinetic mixing of a U(1) x gauge force with hypercharge, singlets or bi-fundamentals which couple to both sectors, and additional loop effects. Finally, we investigate the possible relevance of such sectors for dark matter phenomenology, as well as for low- and high-energy collider searches.

Two-sector disequilibrium growth

NARCIS (Netherlands)

J.G.M. van Marrewijk (Charles); J.B.L.M. Verbeek (Jos)

1994-01-01

textabstractWe investigate the effects of (i) profit distribution to either laborers or capital-owners, (ii) sector-specific or efficient rationing schemes, and (iii) government consumption in a two-sector disequilibrium growth model with sluggish real wage rate adjustment (which affects capital

Integrated HT-PEMFC and multi-fuel reformer for micro CHP. Final report

Energy Technology Data Exchange (ETDEWEB)

2010-07-01

reformed both methane and biogas although the efficiency was low, on the order of 15% due to excessive slip and heat losses. The construction and test of an integrated micro CHP system revealed several problems with the core technology. Therefore, rather than working with the integrated system, individual system components were tested separately. In spite of the problems with the reformer and the fuel cell stack the system was successfully operated and an electric efficiency of 18%{sub LHV} was demonstrated. (Author)

Environmental burdens over the entire life cycle of a biomass CHP plant

International Nuclear Information System (INIS)

Jungmeier, G.; Spitzer, J.; Resch, G.

1998-01-01

To increase the use of biomass for energy production it is important to know the possible and significant environmental effects. A life cycle inventory (LCI) was made on a 1.3 MW el biomass CHP plant located in Reuthe/Vorarlberg/Austria with the purpose of analysing the different environmental burdens over the entire life cycle. The plant is fired with coarse and small fuelwood (10,000 t/yr) from industrial waste and forest residues. The boiler for the steam process has a moving grate burner and a muffle burner. The annual production is 4700 MWh of electricity and 29,000 MWh of district heat. The methodology of the analysis is orientated on the ISO Committee Draft of the Series 13,600. The analysis was carried out for the different sections of the biomass plant over their entire life cycle-construction (1 yr), operation (20 yrs) and dismantling (1 yr). The plant in Reuthe, which is the first cogeneration system of this kind in Austria, is a model for other similar projects. The results are shown as environmental burdens of one year and of the entire life cycle. Some results of the life cycle inventory, like the mass and energy balances, selected emissions to air, allocation results and effects on carbon storage pools are given. The results demonstrate that depending on the stage and the period of life, different environmental burdens become significant, i.e. CO 2 emissions of fossil fuels during construction. NO x emission during operation, emissions to soil during dismantling. The different options for allocation the environmental burdens to electricity and heat show a wide range of possible results, depending on the choice of allocation parameters (energy, exergy, credits for heat or electricity, price) i.e. for the particles emissions: 161 mg/kWh el to minus 566 mg/kWh el , 0 mg/kWh th to 118 mg/kWh th . With the results of the analysis it is thus possible for future similar projects to know when and where significant environmental burdens might be further

The Healthcare and Public Health Sector Challenges and Strategies to Conducting Sector Wide Assessments

OpenAIRE

Meyer, Harry

2008-01-01

Our Healthcare and Public Health (HPH) sector is vast, complex and essential to virtually all other sectors of our nation’s infrastructure. Without a healthy workforce modern society quickly grinds to a halt. The often messy networks of healthcare providers, insurance companies, emergency departments, pharmaceutical manufactures and other equally important actors are bound together in fragile alliances to maintain and restore basic health. Thus the HPH sector becomes an important cog in the w...

Engineering in the energy sector. The single market and the engineering sector; Ingenieria en el sector energetico. El mercado unico y el sector de ingenieria

Energy Technology Data Exchange (ETDEWEB)

Garcia Rodrigues, A [Empresarios Agrupados, A.I.E., Madrid (Spain)

1993-12-15

Projects with large infrastructures, particularly those in the field of energy, provide a strong boost to certain industrial sectors in the country. In the case of Spain, the policy of direct management 'by components' of these projects - hydroelectric power plants, petrochemical plants, thermoelectric plants and nuclear power plants - adopted by the electric utility owners has furthered not only the local equipment manufacturing industry but also the engineering sector. At present, with full implementation of the Single Market in sight, it is particularly interesting for Spain to continue building up a powerful engineering sector, increasing its size and usefulness, and extending its traditional areas of action to other technologies, more on the lines of engineering and consulting firms in the USA than in the rest of Europe. The intention is to endow our equipment and construction companies with the skills necessary to enable them to compete with large European conglomerates in their respective sectors. The structure of these conglomerates usually contains engineering capabilities which are not habitual in our industry. Examples are given, showing how this model has been used to compete and win awards for important international projects. A specific analysis has been made of the position of Spanish engineering and industry in nuclear power generation projects in the former Soviet Union and East European countries, in which large investments are expected to be made. (author)

Energetic optimization of the performances of a hot air engine for micro-CHP systems working with a Joule or an Ericsson cycle

International Nuclear Information System (INIS)

Creyx, M.; Delacourt, E.; Morin, C.; Desmet, B.; Peultier, P.

2013-01-01

The micro combined heat and electrical power systems (micro-CHP) with hot air engines are well adapted for solid biomass upgrading, in particular, the Ericsson engines working with an open cycle and an external combustion. This paper presents a model of an Ericsson engine with a compression and an expansion cylinder which allows a thermodynamic optimization of the engine performances in a global approach. A sensitive analysis on the influent parameters is carried out in order to determine the optimal working conditions of the engine: temperature and pressure range, expansion cycle shape with a late intake valve closing or an early exhaust valve closing, heat transfers through the wall of the cylinders. This study, focused on thermodynamic aspects, is a first step in the design of an Ericsson engine. -- Highlights: ► A model of Ericsson engine working with a Joule or Ericsson cycle is presented. ► Influent factors on the engine performances are investigated. ► The heat exchanges in the cylinder wall must be avoided to improve the performances. ► Closing the intake valve late and the exhaust valve early enhances the performances. ► Efficiency, indicated mean pressure, specific work are thermodynamically optimized.

Cross-Sector Partnership Formation

NARCIS (Netherlands)

I. Stöteler (Ismaela); S. Reeder (Sabine); R.J.M. van Tulder (Rob)

2012-01-01

textabstractA cross-sector partnership is a collaborative effort in which parties from different societal sectors pool resources to provide solutions to (perceived) common problems. These partnerships are often rather complex because of a number of reasons: (1) they address complex issues, (2) they

Sector Economic Outlook. Energy

Energy Technology Data Exchange (ETDEWEB)

NONE

2013-04-15

The energy sector is a key driver of the economic pillar of Vision 2030. As the economy grows, urbanization intensifies and incomes increase, corporate and household demand for energy also rises. To meet this growth in demand for energy, the sector needs to increase investments and diversify into more sources of energy such as geothermal and wind power. It is therefore critical that focus is directed towards development and sustainability of the energy sector to ensure delivery of least cost power that will improve Kenya's competitiveness and achieve the Vision 2030 objective of 10% average annual economic growth.

Las incubadoras de empresas como instrumento de vinculación universidad-sector productivo-sector público

Directory of Open Access Journals (Sweden)

Jorge Moreno

2002-01-01

Full Text Available Este artículo hace referencia a la incubación de empresas en un ambiente tecnológico innovador así como el papel que pueden jugar la universidad, el sector productivo y el sector público para el desarrollo de procesos de incubación. En tal sentido, pretendió analizar la viabilidad del establecimiento de incubadoras de empresas como modalidad de vinculación universidad-sector productivo- sector público. Se concluye: 1 que la inadecuación de las estructuras administrativas de las instituciones gubernamentales dificulta la vinculación con las universidades y sectores productivos. 2 Un aspecto que a resaltar, es la formación, desarrollo de recursos humanos y la transferencia de ciencia y tecnología, constituyen estrategias claras de vinculación y 3 el sector público debe diseñar políticas de vinculación con las empresas y las universidades especialmente en materia de financiamiento.

Integration of fuel cells into residential buildings

International Nuclear Information System (INIS)

Bell, J.M.; Entchev, E.; Gusdorf, J.; Szadkowski, F.; Swinton, M.; Kalbfleisch, W.; Marchand, R.

2004-01-01

Integration of small combined heat and power systems (CHP) into residential buildings is challenging as the loads are small, the load diversity is limited and there are a number of unresolved issues concerning sizing, control, peak loads, emergency operation, grid connection and export, etc. Natural Resources Canada has undertaken an initiative to investigate and develop techniques for the integration of small CHP systems into residential buildings using a highly instrumented house modified to allow quick installation and thorough monitoring of CHP integration techniques as well determining the performance of the CHP systems themselves when operating in a house. The first CHP system installed was a Stirling engine residential CHP system. It was used to examine the completeness of the CHP modifications to the house, to evaluate various building integration techniques and to measure the performance of the CHP system itself. The testing demonstrated the modified house to be an excellent facility for the development of CHP building integration techniques and the testing of residential CHP systems. The Stirling engine CHP system was found to operate well and produce meaningful input to the house. A second system (residential fuel cell) is presently being installed and building integration techniques and the performance of the fuel cell will be tested over the coming year. (author)

Energy sector

International Nuclear Information System (INIS)

1995-01-01

Within the framework of assessing the state of the environment in Lebanon, this chapter describes primary energy demand, the electricity generating sector and environmental impacts arising from the energy sector.Apart from hydropower and traditional energy sources, which together represent 1.7% of energy consumption, all energy in Lebanon derives from imported petroleum products and some coal.Tables present the imports of different petroleum products (Gasoil, Kerosene, fuel oil, coal etc...), their use, the energy balance and demand.Energy pricing and pricing policies, formal and informal electricity generations in Lebanon are described emphasized by tables. The main environmental impacts are briefly summarized. Thermal power stations give rise to emissions of Sulphur dioxide (SO 2 ), particulates, oxides of nitrogen (NO x ) and CO/CO 2 from combustion of primary fuel informally generated power from both industry and domestic consumption produce particulate materials and emissions of NO x and SO 2 projected emissions of SO 2 from the power sector with the present generating capacity and with the new combined cycle power plants in operation are shown. Other environmental impacts are described. Recommendations for supply and environment policy are presented

Development of HT-PEMFC components and stack for CHP unit

Energy Technology Data Exchange (ETDEWEB)

Jensen, Jens Oluf; Li, Q. (Technical Univ. of Denmark, Dept. of Chemistry, Kgs. Lyngby (Denmark)); Terkelsen, C.; Rudbech, H.C.; Steenberg, T. (Danish Power System Aps, Charlottenlund (Denmark)); Thibault de Rycke (IRD Fuel Cell A/S, Svendborg (Denmark))

2009-10-15

The aim of the project has been to further develop components for an all Danish high temperature PEM fuel cells stack for application in combined heat and power units (CHP units). The final product aimed at was a 1.5-2 kW stack for operation at 150-200 deg. C. The project follows the previous PSO project 4760, 'High Temperature PEM Fuel Cell'. The project has addressed the HT-PEM fuel cells form a components point of view and the materials here for. The main areas were polymer and membrane development, electrode and MEA development (MEA = membrane electrode assembly, i.e. the cells.) and stack development. The membrane development begins with the polymer. The polymerization technique was improved significantly in two ways. Better understanding of the process and the critical issues has led to more reproducible results with repeated high molecular weights. The molecular weight is decisive for the membrane strength and durability. The process was also scaled up to 100-200 g polymer pr. batch in a new polymerization facility build during the project. It is dimensioned for larger batches too, but this was not verified during the project. The polymer cannot be purchased in the right quality for fuel cell membranes and it is important that it manufacture is not a limiting factor at the present state. Experiments with other membrane casting techniques were also made. The traditional PBI doped with phosphoric acid is still the state of art membrane for the HT-PEM fuel cells, but progress was also made with modified membranes. Different variants of PBI were synthesized and tested. Electrodes have been manufactured by a spray technique in contrast to the previously applied tape casting. The hand held spray gun previously led to an improvement of the electrodes, but the reproducibility was limited. Subsequently the construction of a semi automated spray machine was started and results like of the best hand sprayed electrodes were obtained. A viable way of MEA rim

Industrial Disputes in the Construction Sector

Directory of Open Access Journals (Sweden)

L.J Perry

2012-11-01

Full Text Available The Cole Royal Commission enquiry into the building and construction (abbreviated to ‘construction’ sector recommended controversial workplace-relation reforms for that sector. The recommended changes are likely to be enshrined in legislation within the year. The Commission drew on analyses of industrial disputes that focused, in the main, on quite recent experience. This paper attempts to give a broader historical perspective on disputes in that sector by considering the pattern of disputes for the entire post-World War II period. Accordingly, data on disputes and employees during the entire period are gathered from Australian Bureau of Statistics current and archived sources. These data are classified according to sector (construction versus non-construction and analysed. It is found that the strike rate has, on average, been greater in the construction sector than in the non-construction sector. However, there have been periods during which disputes in the construction sector have been relatively low. The most recent period was during the period of the Accord (1983-96, during which the strike rate in the construction sector fell relatively strongly. The analysis of this relatively broad historical period draws attention, among other things, to the possibility that the sort of strategies employed during the Accord years – strategies of cooperation and consensus building – may provide a more effective means of bringing industrial peace to the workplace relations scene of the construction sector than policies that are relatively confrontational.

The electric tariff in the residential sector; Tarificacion electrica en el sector residencial

Energy Technology Data Exchange (ETDEWEB)

Sheinbaum Pardo, Claudia [Instituto de Ingenieria, Universidad Nacional Autonoma de Mexico (UNAM), Mexico, D. F. (Mexico)

1997-12-31

The main objective of this paper is to make an historical revision and analyze the current condition of the electric tariffs in the Mexican residential sector and ask ourselves if the equalization of tariffs generates the possibility that the entire population has access to the electricity service. The document is divided into three parts. The first one presents the history and the tendencies of the tariffs in the domestic sector in Mexico since 1973 until 1996 and the current tariff structure. The second one describes the characteristics of the residential users and mention is made of how the increment of the electric tariffs would affect the various population sectors. The last part of this paper presents some tariff criteria, that take into account energy conservation measures [Espanol] El objetivo principal de este trabajo es hacer una revision historica y analizar la situacion actual de las tarifas electricas en el sector residencial mexicano y preguntarnos si la igualdad de tarifas genera la posibilidad de que toda la poblacion tenga acceso al servicio electrico. El documento se divide en tres partes. La primera presenta la historia y tendencias de las tarifas del sector domestico en Mexico desde 1973 hasta 1996 y la estructura tarifaria actual. La segunda describe las caracteristicas de los usuarios residenciales y se menciona como afectaria el incremento de las tarifas electricas a los distintos sectores de la poblacion. La ultima parte de este trabajo presenta algunos criterios de tarificacion, que toman en cuenta medidas de ahorro de energia

Financial Sector Structure and Economic Growth

DEFF Research Database (Denmark)

Rapp, Marc Steffen

Economists consider a well-functioning financial sector to be of first order importance for a modern (capitalist) economy. However, in the aftermath of the financial crisis a debate about the future role of the financial sector emerged and many commentators have called into question whether...... the financial sector actually creates value for the wider society. This research, which is part of a broad research project “Nordic Finance and the Good Society”, aims to contribute to this debate by studying the role of the financial sector structure for economic development of an economy. Therefore......, it proceeds in five steps. First, it provides some reflections on the financial sector and the existing literature studying financial sector structure and its association with economic development. Second, it presents stylized firm-level evidence on capital structure choice and firm behavior. It is argued...

The Italian energy sector

International Nuclear Information System (INIS)

Anon.

1997-01-01

The energy sector in Italy, as in Europe and in many other areas of the world, is undergoing rapid and profound changes. The 1986 ratification of the European Single Act was intended to create a European internal market, where circulation of people, capital, goods, and services would reach the highest possible liberalization. In 1988, in the document The Energy Internal Market, the European Union (EU) commission stressed the need for creation of an internal energy market--free of obstacles--to increase security of supply, to reduce costs, and to strengthen the competitiveness of the European economic system. In 1990, the Community Council adopted directives to implement the EU energy sector. This article describes Italy's role as part of the EU energy sector. It covers the following topics: the Italian energy sector; electricity vs gas transportation; project finance; recent developments advance Italian power industry; specifying powerplant components -- Italian stype; buyers' guide to Italian equipment, services

Ingen ild uden røg

DEFF Research Database (Denmark)

Tarrow, Caroline Sophia; Lauta, Kristian Cedervall

2011-01-01

Artiklen omhandler den retlige regulering af politi og beredskab i katastrofesituationer. Katastrofesituationer illustrerer den vanskelige balancegang mellem sikring af borgernes retssikkerhed og effektiv håndhævelse. Ar­tik­len vil igennem en sammenligning af politilovens, hen­holds­vis beredska...

Miljøoptimering af afvaskning ved tryk med vandfortyndbar flexotrykfarve

DEFF Research Database (Denmark)

Larsen, Henrik Fred; Helweg, Christian; Pedersen, Anne Rathmann

Rapporten beskriver praksis ved afvaskning af vandfortyndbare flexotrykfarver i emballageindustrien og anviser muligheder for indførelse af renere teknologi til reduktion af spildevandsbelastningen. Anbefalingerne omfatter a) udformning af farveværker med henblik på effektiv tømning af farve og e...

Guide til effektiv læring

DEFF Research Database (Denmark)

Elias, Stina Vrang; Holt Larsen, Henrik

2011-01-01

Hvordan bygger man bro mellem medarbejdernes individuelle kompetenceudvikling og hele virksomhedens læring og udvikling? Få indblik og inspiration i denne artikel om effektive læringsformer, der kan supplere de traditionelle kurser og uddannelser og gøre virksomhederne som helhed bedre til at lær....... Artiklen baserer sig på anbefalinger fra guiden ”Effektive læringsformer” udarbejdet af blandt andre tænketanken DEA....

Life cycle analysis of distributed concentrating solar combined heat and power: economics, global warming potential and water

International Nuclear Information System (INIS)

Norwood, Zack; Kammen, Daniel

2012-01-01

We report on life cycle assessment (LCA) of the economics, global warming potential and water (both for desalination and water use in operation) for a distributed concentrating solar combined heat and power (DCS-CHP) system. Detailed simulation of system performance across 1020 sites in the US combined with a sensible cost allocation scheme informs this LCA. We forecast a levelized cost of $0.25 kWh −1 electricity and $0.03 kWh −1 thermal, for a system with a life cycle global warming potential of ∼80 gCO 2 eq kWh −1 of electricity and ∼10 gCO 2 eq kWh −1 thermal, sited in Oakland, California. On the basis of the economics shown for air cooling, and the fact that any combined heat and power system reduces the need for cooling while at the same time boosting the overall solar efficiency of the system, DCS-CHP compares favorably to other electric power generation systems in terms of minimization of water use in the maintenance and operation of the plant. The outlook for water desalination coupled with distributed concentrating solar combined heat and power is less favorable. At a projected cost of $1.40 m −3 , water desalination with DCS-CHP would be economical and practical only in areas where water is very scarce or moderately expensive, primarily available through the informal sector, and where contaminated or salt water is easily available as feed-water. It is also interesting to note that $0.40–$1.90 m −3 is the range of water prices in the developed world, so DCS-CHP desalination systems could also be an economical solution there under some conditions. (letter)

Brazilian healthcare in the context of austerity: private sector dominant, government sector failing.

Science.gov (United States)

Costa, Nilson do Rosário

2017-04-01

This paper presents the arguments in favor of government intervention in financing and regulation of health in Brazil. It describes the organizational arrangement of the Brazilian health system, for the purpose of reflection on the austerity agenda proposed for the country. Based on the literature in health economics, it discusses the hypothesis that the health sector in Brazil functions under the dominance of the private sector. The categories employed for analysis are those of the national health spending figures. An international comparison of indicators of health expenses shows that Brazilian public spending is a low proportion of total spending on Brazilian health. Expenditure on individuals' health by out-of-pocket payments is high, and this works against equitability. The private health services sector plays a crucial role in provision, and financing. Contrary to the belief put forward by the austerity agenda, public expenditure cannot be constrained because the government has failed in adequate provision of services to the poor. This paper argues that, since the Constitution did not veto activity by the private sector segment of the market, those interests that have the greatest capacity to vocalize have been successful in imposing their preferences in the configuration of the sector.

Private Sector Participation in the Indian Power Sector and Climate Change

International Nuclear Information System (INIS)

Bhide, Shashanka; Malik, Payal; Nair, S.K.N.; Blanc, Aymeric; Jaitley, Monica; Acharya, Nandini

2010-08-01

In September 2005, AFD's Research Department launched a Research Program on Public Private Partnerships with an approach combining economic analysis (contractual incentives, financing of investment, etc.) with a sociological and political approach to regulatory issues. Various case studies have been conducted in different sectors (water and sanitation, power, transport) and countries. This study falls within the above research framework since India - like most major developing countries - has attempted to introduce market forces in its electric power systems. At the same time, growing concern over global climate change has put the spotlight on the need for India to control its emissions of greenhouse gases (GHG). India is currently the world's sixth biggest producer of GHG emissions, but is the second biggest if one considers the rate of augmentation of its emissions. Half of India's total GHG emissions are produced by its power sector, and 70 per cent of electricity is generated by thermal power plants, mainly from coal. Climate change mitigation in the power sector is thus a strategic issue for AFD in India. This study is structured so as to examine the intersection of these two crucial challenges in India by exploring the links between private participation in the power sector in India and the reduction of GHG emissions

The benefit of regional diversification of cogeneration investments in Europe. A mean-variance portfolio analysis

International Nuclear Information System (INIS)

Westner, Guenther; Madlener, Reinhard

2010-01-01

The EU Directive 2004/8/EC, concerning the promotion of cogeneration, established principles on how EU member states can support combined heat and power generation (CHP). Up to now, the implementation of these principles into national law has not been uniform, and has led to the adoption of different promotion schemes for CHP across the EU member states. In this paper, we first give an overview of the promotion schemes for CHP in various European countries. In a next step, we take two standard CHP technologies, combined-cycle gas turbines (CCGT-CHP) and engine-CHP, and apply exemplarily four selected support mechanisms used in the four largest European energy markets: feed-in tariffs in Germany; energy efficiency certificates in Italy; benefits through tax reduction in the UK; and purchase obligations for power from CHP generation in France. For contracting companies, it could be of interest to diversify their investment in new CHP facilities regionally over several countries in order to reduce country and regulatory risk. By applying the Mean-Variance Portfolio (MVP) theory, we derive characteristic return-risk profiles of the selected CHP technologies in different countries. The results show that the returns on CHP investments differ significantly depending on the country, the support scheme, and the selected technology studied. While a regional diversification of investments in CCGT-CHP does not contribute to reducing portfolio risks, a diversification of investments in engine-CHP can decrease the risk exposure. (author)

The benefit of regional diversification of cogeneration investments in Europe. A mean-variance portfolio analysis

Energy Technology Data Exchange (ETDEWEB)

Westner, Guenther; Madlener, Reinhard [E.ON Energy Projects GmbH, Arnulfstrasse 56, 80335 Munich (Germany)

2010-12-15

The EU Directive 2004/8/EC, concerning the promotion of cogeneration, established principles on how EU member states can support combined heat and power generation (CHP). Up to now, the implementation of these principles into national law has not been uniform, and has led to the adoption of different promotion schemes for CHP across the EU member states. In this paper, we first give an overview of the promotion schemes for CHP in various European countries. In a next step, we take two standard CHP technologies, combined-cycle gas turbines (CCGT-CHP) and engine-CHP, and apply exemplarily four selected support mechanisms used in the four largest European energy markets: feed-in tariffs in Germany; energy efficiency certificates in Italy; benefits through tax reduction in the UK; and purchase obligations for power from CHP generation in France. For contracting companies, it could be of interest to diversify their investment in new CHP facilities regionally over several countries in order to reduce country and regulatory risk. By applying the Mean-Variance Portfolio (MVP) theory, we derive characteristic return-risk profiles of the selected CHP technologies in different countries. The results show that the returns on CHP investments differ significantly depending on the country, the support scheme, and the selected technology studied. While a regional diversification of investments in CCGT-CHP does not contribute to reducing portfolio risks, a diversification of investments in engine-CHP can decrease the risk exposure. (author)

On value differences experienced by sector switchers

NARCIS (Netherlands)

de Graaf, G.; van der Wal, Z.

2008-01-01

This article examines experienced differences in values between employees in the public and private sector. To elucidate them, the authors interviewed 30 employees of the public sector previously employed in the private sector and 30 employees of the private sector previously employed in the public

Attractiveness of employment sectors for physical therapists in Ontario, Canada (1999-2007: implication for the long term care sector

Directory of Open Access Journals (Sweden)

Landry Michel D

2012-05-01

Full Text Available Abstract Background Recruiting and retaining health professions remains a high priority for health system planners. Different employment sectors may vary in their appeal to providers. We used the concepts of inflow and stickiness to assess the relative attractiveness of sectors for physical therapists (PTs in Ontario, Canada. Inflow was defined as the percentage of PTs working in a sector who were not there the previous year. Stickiness was defined as the transition probability that a physical therapist will remain in a given employment sector year-to-year. Methods A longitudinal dataset of registered PTs in Ontario (1999-2007 was created, and primary employment sector was categorized as ‘hospital’, ‘community’, ‘long term care’ (LTC or ‘other.’ Inflow and stickiness values were then calculated for each sector, and trends were analyzed. Results There were 5003 PTs in 1999, which grew to 6064 by 2007, representing a 21.2% absolute growth. Inflow grew across all sectors, but the LTC sector had the highest inflow of 32.0%. PTs practicing in hospitals had the highest stickiness, with 87.4% of those who worked in this sector remaining year-to-year. The community and other employment sectors had stickiness values of 78.2% and 86.8% respectively, while the LTC sector had the lowest stickiness of 73.4%. Conclusion Among all employment sectors, LTC had highest inflow but lowest stickiness. Given expected increases in demand for services, understanding provider transitional probabilities and employment preferences may provide a useful policy and planning tool in developing a sustainable health human resource base across all employment sectors.

Attractiveness of employment sectors for physical therapists in Ontario, Canada (1999-2007): implication for the long term care sector

Science.gov (United States)

2012-01-01

Background Recruiting and retaining health professions remains a high priority for health system planners. Different employment sectors may vary in their appeal to providers. We used the concepts of inflow and stickiness to assess the relative attractiveness of sectors for physical therapists (PTs) in Ontario, Canada. Inflow was defined as the percentage of PTs working in a sector who were not there the previous year. Stickiness was defined as the transition probability that a physical therapist will remain in a given employment sector year-to-year. Methods A longitudinal dataset of registered PTs in Ontario (1999-2007) was created, and primary employment sector was categorized as ‘hospital’, ‘community’, ‘long term care’ (LTC) or ‘other.’ Inflow and stickiness values were then calculated for each sector, and trends were analyzed. Results There were 5003 PTs in 1999, which grew to 6064 by 2007, representing a 21.2% absolute growth. Inflow grew across all sectors, but the LTC sector had the highest inflow of 32.0%. PTs practicing in hospitals had the highest stickiness, with 87.4% of those who worked in this sector remaining year-to-year. The community and other employment sectors had stickiness values of 78.2% and 86.8% respectively, while the LTC sector had the lowest stickiness of 73.4%. Conclusion Among all employment sectors, LTC had highest inflow but lowest stickiness. Given expected increases in demand for services, understanding provider transitional probabilities and employment preferences may provide a useful policy and planning tool in developing a sustainable health human resource base across all employment sectors. PMID:22643111

Sector agreements in post-2012 commitments

International Nuclear Information System (INIS)

Vieillefosse, A.

2007-01-01

After having recalled the economical theory on havens of pollution, and the problem of concurrence distortions in the Kyoto protocol, and then defined what a sector-based objective is, this report proposed analyses on several sectors: electricity and heat production, steel, cement, aluminium, chemistry and, more partially, the transport sector (light motor vehicles and air transporters). The objective is to develop economical instruments which will help industrialists in adopting less polluting technologies while minimizing concurrence distortions induced by the carbon constraint. For each sector, the report proposes an assessment of emissions, growth prospects, and exposure to international concurrence. It assess to which extent a sector-based objective would be justified and relevant

Ingerop - Nuclear sector

International Nuclear Information System (INIS)

2016-01-01

As regards the nuclear sector, Ingerop has acquired along the decades extensive experience in designing and calculating complex structures for nuclear facilities. Since 2002, Ingerop focused on more system- and process-oriented projects in this field. Nowadays, Ingerop offers integrated services based on its sound know-how, top-notch expertise and insight into the management of nuclear projects, for both revamping and new build activities. Ingerop has made the development of the energy sector one of its top priorities in particular for the nuclear sector along with NucAdvisor, the first French engineering practice specialising in civil nuclear power. NucAdvisor's main mission is to assist governments or their representatives in developing their nuclear programs offering expertise and consulting services on specific topics like siting, licensing and operation of nuclear power plants, as well as decommissioning and dismantling and radioactive waste management. In January 2016, a new subsidiary has been created - INGEROP Contracting - which provides a global EPC/turnkey offer covering all fields of energy and industry. Its goal is to deliver projects from the design up to the commissioning, while taking a clear commitment on the overall cost and schedule. This brochure presents the Ingerop Company, its offer of services and main fields of intervention, its IT tools for 3D modeling and design, its activities and main references in the nuclear sector

Energy. Sector 1

International Nuclear Information System (INIS)

1994-01-01

The aim of this article is to report the results of the greenhouse gas (GHG) emission inventory for the year 1994. The following GHG are of interest in the energy sector: Carbon dioxide CO 2 , methane CH 4 , nitrous oxide N 2 O, oxides of nitrogen NO x , carbon monoxide CO, sulphur dioxide SO 2 and non-methane volatile organic compounds (NMVOCs). The inventory has focused on the following GHG related sources: -Electricity generation through the electric utility. -Private generation of electricity -Manufacturing industries and construction -Transport: road, domestic aviation and national navigation -Energy use in the residential sector -Energy use in the commercial/institutional sector -Energy use in the agriculture/forestry/fishing sector The fuel types taken into consideration are:Gasoline, jet Kerosene, Kerosene for household use, gas oil, diesel oil, fuel oil, LPG, lubricating oil, coal, wood and charcoal (solid biomass). Care has been taken to eliminate the fuel used by international marine and aviation bunkers from the national inventory. The amount of GHG released to the atmosphere has been estimated using the IPCC methodology and emission factors .Where national emission factors differed from those of IPCC, the factors are discussed. Complete documentation of compiled information and data sources are attached to this article.Finally both the reference approach and analysis by source categories have been carried out and are reported in this inventory

Monetary Policy with Sectoral Trade-offs

DEFF Research Database (Denmark)

Petrella, Ivan; Rossi, Raffaele; Santoro, Emiliano

2017-01-01

properties of simple rules that react to alternative measures of final goods price inflation. Due to factor demand linkages, the cost of production in one sector is influenced by price-setting in the other sector. Therefore, measures of aggregate inflation weighing sectoral prices based on their relative...

Are high penetrations of commercial cogeneration good for society?

Science.gov (United States)

Keen, Jeremy F.; Apt, Jay

2016-12-01

Low natural gas prices, market reports and evidence from New York State suggest that the number of commercial combined heat and power (CHP) installations in the United States will increase by 2%-9% annually over the next decade. We investigate how increasing commercial CHP penetrations may affect net emissions, the distribution network, and total system energy costs. We constructed an integrated planning and operations model that maximizes owner profit through sizing and operation of CHP on a realistic distribution feeder in New York. We find that a greater penetration of CHP reduces both total system energy costs and network congestion. Commercial buildings often have low and inconsistent heat loads, which can cause low fuel utilization efficiencies, low CHP rates-of-return and diminishing avoided emissions as CHP penetration increases. In the northeast, without policy intervention, a 5% penetration of small commercially owned CHP would increase CO2 emissions by 2% relative to the bulk power grid. Low emission CHP installations can be encouraged with incentives that promote CHP operation only during times of high heat loads. Time-varying rates, such as time-of-day and seasonal rates, are one option and were shown to reduce customer emissions without reducing profits. In contrast, natural gas rate discounts, a common incentive for industrial CHP in some states, can encourage CHP operation during low heat loads and thus increase emissions.

Private Sector Credit and Inflation Volatility

Directory of Open Access Journals (Sweden)

Lorna Katusiime

2018-04-01

Full Text Available This paper investigates the effect of inflation volatility on private sector credit growth. The results indicate that private sector credit growth is positively linked to the one period lagged inflation volatility. Given that past monetary policy actions continue to affect the targeted variables due to the substantial lags in the transmission mechanism, the positive response of private sector credit growth to past inflation volatility suggests a credible monetary policy regime in Uganda, which has led to a reduction in the level of macroeconomic uncertainty and the restoration of favorable economic conditions and prospects, thus increasing the demand for credit. Further, the study finds that the lagged private sector credit growth, nominal exchange rate, and inflation have a statistically significant effect on private sector credit growth while financial innovation, interest rates, and GDP growth appear not to be important determinants of private sector credit growth. The robustness of our findings is confirmed by sensitivity checks.

Smart grids and the transformation of the electricity sector: ICT firms as potential catalysts for sectoral change

International Nuclear Information System (INIS)

Erlinghagen, Sabine; Markard, Jochen

2012-01-01

The sustainability challenges associated with increasing demand and generation of electricity require a far-reaching transformation of the energy system. Smart grid technologies are expected to play a major role in such sectoral transformation. While a growing body of literature is concerned with the dynamics and particularities of sectoral transformation, most contributions have focused on exogenous shocks or new technological developments as drivers of change. This paper complements the existing perspectives by exploring the role of actors as catalysts for transformation. Within the field of smart grid, we study the transformative influence of ICT firms on the energy sector in Europe. More specifically, we analyze actor participation in 450 European smart grid projects between 2000 and 2011 as well as acquisitions in the field. We find that incumbent firms from the ICT sector have gained influence and drive transformation through the creation of variety, in terms of technology, business models and value chains. As a strategic reaction, electricity sector incumbents have recently acquired many start-ups specialized in ICT technology and thus expanded their competence base. We conclude that entrants from another sector can be important catalysts for sectoral transformation and should be analyzed more systematically in transition studies. - Highlight: ► Entrants from adjacent sectors are important catalysts for sectoral transformation. ► We provide a socio-technical systems perspective on smart grid. ► We analyze actor participation in smart grid projects in Europe 2000–2011. ► ICT firms drive transformation towards a smarter grid.

Account for sector heterogeneity in China's energy consumption. Sector price indices vs. GDP deflator

International Nuclear Information System (INIS)

Ma, Chunbo

2010-01-01

A common practice in decomposition analyses is to deflate output indicators to purge the impact of inflation by using a general deflator. This practice fails to account for sector heterogeneity and can be hazardous. Although the general identified patterns are largely correct, the calculated magnitudes can be misleading or even wrongly signed. Instead, it is strongly recommended that sector heterogeneity is accounted for by using individual sector price indices for all relevant sectors instead of one general (GDP) deflator. This paper analyzes this advanced decomposition using Chinese data and compares to the usual method of using only one deflator. It is found that while most differences are only of quantitative quality, some show even a qualitative difference. Furthermore, the rising energy intensity in the early 2000s, which has been discussed by previous studies, vanishes completely. (author)

Reflections on science and the communication sector

Science.gov (United States)

Raes, Frank

2015-04-01

Reflections on science and the communication sector. In this contribution I will reflect about successes and failures in communicating climate change and air pollution sciences to the general public. These communication efforts included writing popular articles, giving public presentations, working with people from the social scientists and artists. Giving the fact that communication is a very important (economic) sector on its own, the question is to what extent scientists should enter that sector, whether scientists are at all accepted in that sector, whether they should use the expertise in that sector, or whether they should merely provide the knowledge to be used by that sector.

Public Sector Organizations

DEFF Research Database (Denmark)

Meyer, Renate; Leixnering, Stephan

2015-01-01

New public management-inspired reforms created numerous autonomous units with many different faces and labels. This variety of organizations and organizational forms precludes a straightforward definition of what constitutes a public sector organization and blurs the boundaries between the public...... and private sectors as well as the boundaries of single organizations. In addition, the complexity of the interlocking arrangements and relationships in this public organizational landscape has resulted in considerable governance problems with serious implications for coordination and policy coherence....

“Crossing over”: appropriate private sector principles, to operate more reliable public sector water services

OpenAIRE

Kevin Wall

2008-01-01

Private sector institutions utilise many different business methods, some of which can selectively be adapted for use by organisations outside the private sector, to the benefit of their service delivery responsibilities. But the best of the appropriate practices from the private sector have often “not crossed over”. The Water Research Commission (WRC) of South Africa, working in collaboration with the Council for Scientific and Industrial Research (CSIR), finds that the concept of franch...

The Distribution of Gender and Public Sector Pay Premia: Evidence from the Egyptian Organised Sector

OpenAIRE

Mona Said

2003-01-01

Using earnings functions estimates on a survey of Egyptian establishments conducted in 1990, standard decomposition techniques of wage differentials show that both males and females have an earnings disadvantage in the public enterprise and government sectors after correcting for a range of personal and job characteristics. Gender based pay discrimination is small in the public sector. In contrast, it is quite high by international comparisons in the private sector and mainly takes place by p...

Advice on MEP tariff for cogeneration in 2004

International Nuclear Information System (INIS)

Ten Donkelaar, M.; Harmsen, R.; Scheepers, M.J.J.

2004-05-01

The title analysis is part of the monitoring of combined heat and power generation (CHP) in the Netherlands, and concerns the impact of the new Dutch subsidy scheme MEP (environmental quality of power generation) on the cost-effectiveness of CHP investments based on a number of CHP reference cases. The MEP scheme provides a reward for the additional kWhs of electricity produced by CHP units compared to separate production of heat and power. This means that the MEP rewards the 'CO2 free kWhs' produced by CHP units, providing an incentive for the most efficient CHP units. In the first chapter a description of the calculation of 'CO2 free kWhs' is given followed by the physical developments of CHP in the Netherlands. The third and final chapter calculates the impact of the MEP regulation on the cost effectiveness of CHP and compares it with the European Community Guidelines on Aid for Environmental Protection. The results of the calculations show that the Dutch MEP scheme complies with the European guidelines for all CHP reference cases [nl

THE INTERDEPENDENCE BETWEEN THE FINANCIAL SECTOR AND BUSINESS SECTOR IN ASEAN 4 COUNTRIES

Directory of Open Access Journals (Sweden)

Aulia Keiko Hubbansyah

2018-01-01

Full Text Available In this study, we analyze the dynamic interactions between the financial sectors and the business sectors in the ASEAN-4 countries (Indonesia, Malaysia, Thailand and Singapore. To do that, we apply the newly generalized version of the Vector Autoregressive Framework (VAR spillover index approach proposed by Diebold and Yilmaz (2012 as our method of analysis. Based on quarterly data of each variable over the period from the first quarter of 1984 to the fourth quarter of 2015 for the ASEAN-4 countries, this study finds that: 1 Spillovers between the variables move in a diverse manner over the period of analysis for each country, 2 The variable that acts as the dominant crisis transmitter in each country is different for each country, 3 The interdependence between the variables became stronger, both within and across the countries, during the crisis period. In particular, the business sectors played a leading role during the onset of the crisis, while the financial sectors took their places as the dominant source of spillovers as the crisis deepened. 4 Credit growth in Thailand was found to be the dominant transmitter of shocks to the ASEAN-3 countries. Overall, these results suggest that the strength and movement of the spillovers between the financial and business sectors changed from time to time along with the changes that happened in the economies.

Electricity sector integration in West Africa

International Nuclear Information System (INIS)

Pineau, Pierre-Olivier

2008-01-01

Regional and global integration initiatives push for more electricity sector integration everywhere in the world, including West Africa. The creation of the West African Power Pool (WAPP) in 2000 and important investments under this new structure in 2006 are concrete actions that will result in a more integrated West African electricity sector. But will this integrated sector be more functional than the previous ones? Will the identified electricity sector problems be solved with the new power pool? This paper analyzes how power sector integration is presented by international institutions (the UN Economic Commission for Africa, World Energy Council and World Bank) and identifies three problematic issues with the current integration approach: lack of African ownership, unclear and conflicting reform objectives and uncertainty of integration outcomes

La eficiencia relativa del sector real vs. la del sector financiero de la economía colombiana

Directory of Open Access Journals (Sweden)

Gloria Isabel Rodriguez Lozano

2017-09-01

Full Text Available El objetivo de esta investigación es comparar las empresas del sector real de la economía y las entidades del sector financiero colombiano para el año 2014, en términos de eficiencia relativa, mediante la aplicación de la metodología Data Envelopment Analysis (DEA. Para un país como Colombia, perteneciente a las economías emergentes, es importante la realización de este estudio para determinar hasta dónde estos dos sectores son eficientes o ineficientes, dada la importancia que tienen en la generación de desarrollo y en la disminución de las desigualdades sociales. Se toman como fuente de información la Superintendencia de Sociedades y la Superintendencia Financiera. Se analizaron 26.799 empresas del sector real y 254 entidades del sector financiero, lo que dio como resultado mejores indicadores para el sector financiero y, dentro de este, se destacó la industria aseguradora. Sin embargo, es necesario que estos dos sectores mejoren su desempeño, ya que solo el 2,6 % de las empresas y entidades estudiadas es eficiente.

'Where is the public health sector?' Public and private sector healthcare provision in Madhya Pradesh, India.

Science.gov (United States)

De Costa, Ayesha; Diwan, Vinod

2007-12-01

This paper aims to empirically demonstrate the size and composition of the private health care sector in one of India's largest provinces, Madhya Pradesh. It is based on a field survey of all health care providers in Madhya Pradesh (60.4 million in 52,117 villages and 394 towns). Seventy-five percent of the population is rural and 37% live below poverty line. This survey was done as part of the development of a health management information system. The distribution of health care providers in the province with regard to sector of work (public/private), rural-urban location, qualification, commercial orientation and institutional set-up are described. Of the 24,807 qualified doctors mapped in the survey, 18,757 (75.6%) work in the private sector. Fifteen thousand one hundred forty-two (80%) of these private physicians work in urban areas. The 72.1% (67793) of all qualified paramedical staff work in the private sector, mostly in rural areas. The paper empirically demonstrates the dominant heterogeneous private health sector and the overall the disparity in healthcare provision in rural and urban areas. It argues for a new role for the public health sector, one of constructive oversight over the entire health sector (public and private) balanced with direct provision of services where necessary. It emphasizes the need to build strong public private partnerships to ensure equitable access to healthcare for all.

Udvikling af vaccine mod dyr tarmsygdom

DEFF Research Database (Denmark)

Jungersen, Gregers

2012-01-01

DTU Veterinærinstituttet arbejder på at udvikle en effektiv vaccine mod bakterien Lawsonia intracellularis, der forårsager den antibiotikakrævende tarmsygdom proliferativ enteritis. Bakterien driller i laboratoriet, så forskerne må finde innovative veje til vaccinen. Målet er, at vaccinens...

Determination of the potential for utilising combined heat and power and of the target reduction of CO{sub 2} emissions, inclusive of cost analysis (increased use of combined heat and power); Ermittlung der Potenziale fuer die Anwendung der Kraft-Waerme-Kopplung und der erzielbaren Minderung der CO{sub 2}-Emissionen einschliesslich Bewertung der Kosten (Verstaerkte Nutzung der Kraft-Waerme-Kopplung)

Energy Technology Data Exchange (ETDEWEB)

Horn, Manfred; Ziesing, Hans-Joachim [Deutsches Inst. fuer Wirtschaftsforschung, Berlin (Germany); Matthes, Felix Christian; Harthan, Ralph [Oeko Institut e.V., Berlin (Germany); Menzler, Gerald [VIK Verband der Industriellen Energie- und Kraftwirtschaft e.V., Essen (Germany)

2007-07-15

The report provides a statistical overview of CHP utilisation up to now in Germany, analyses the general economic and political conditions with a view to evaluating the competitiveness of CHP, discusses the effectiveness of the German CHP Act with respect to its contribution to meeting emissions-related goals, analyses the cost-effectiveness of investments in different types of new CHP installations, addresses mid- and longer term potential as well as impediments to the utilisation of CHP installations, presents model simulations of how CHP is expected to develop in the context of economic conditions subject to various general political conditions and makes recommendations with an eye to additional requirements and opportunities to support CHP, against the background of the findings of the analysis. (orig.)

Public sector achievement in 36 countries

NARCIS (Netherlands)

Benedikt Goderis

2015-01-01

This report examines the inputs, outputs and outcomes of the public sector in 36 countries (including the EU-28) over the period 1995-2012. We study two sectors – education and health – in some detail, while taking a more general look at the sectors social safety, housing, social security and

Changes in the Danish construction sector

DEFF Research Database (Denmark)

Kristiansen, Kristian; Emmitt, Stephen; Bonke, Sten

2005-01-01

Like the building sector in many other countries the Danish construction sector was criticised heavily in a number of government sponsored reports in the 1990s. The sector was seen to be unresponsive to change and ‘locked-in’ to familiar working practices, and so development was needed. And, like...

Third sector primary care for vulnerable populations.

Science.gov (United States)

Crampton, P; Dowell, A; Woodward, A

2001-12-01

This paper aims to describe and explain the development of third sector primary care organisations in New Zealand. The third sector is the non-government, non-profit sector. International literature suggests that this sector fulfils an important role in democratic societies with market-based economies, providing services otherwise neglected by the government and private for-profit sectors. Third sector organisations provided a range of social services throughout New Zealand's colonial history. However, it was not until the 1980s that third sector organisations providing comprehensive primary medical and related services started having a significant presence in New Zealand. In 1994 a range of union health centres, tribally based Mäori health providers, and community-based primary care providers established a formal network -- Health Care Aotearoa. While not representing all third sector primary care providers in New Zealand, Health Care Aotearoa was the best-developed example of a grouping of third sector primary care organisations. Member organisations served populations that were largely non-European and lived in deprived areas, and tended to adopt population approaches to funding and provision of services. The development of Health Care Aotearoa has been consistent with international experience of third sector involvement -- there were perceived "failures" in government policies for funding primary care and private sector responses to these policies, resulting in lack of universal funding and provision of primary care and continuing patient co-payments. The principal policy implication concerns the role of the third sector in providing primary care services for vulnerable populations as a partial alternative to universal funding and provision of primary care. Such an alternative may be convenient for proponents of reduced state involvement in funding and provision of health care, but may not be desirable from the point of view of equity and social cohesion

The first LHC sector is fully interconnected

CERN Multimedia

2006-01-01

Sector 7-8 is the first sector of the LHC to become fully operational. All the magnets, cryogenic line, vacuum chambers and services are interconnected. The cool down of this sector can soon commence. LHC project leader Lyn Evans, the teams from CERN's AT/MCS, AT/VAC and AT/MEL groups, and the members of the IEG consortium celebrate the completion of the first LHC sector. The 10th of November was a red letter day for the LHC accelerator teams, marking the completion of the first sector of the machine. The magnets of sector 7-8, together with the cryogenic line, the vacuum chambers and the distribution feedboxes (DFBs) are now all completely interconnected. Sector 7-8 has thus been closed and is the first LHC sector to become operational. The interconnection work required several thousand electrical, cryogenic and insulating connections to be made on the 210 interfaces between the magnets in the arc, the 30 interfaces between the special magnets and the interfaces with the cryogenic line. 'This represent...

Fuel cell-based CHP system modelling using Artificial Neural Networks aimed at developing techno-economic efficiency maximization control systems

International Nuclear Information System (INIS)

Asensio, F.J.; San Martín, J.I.; Zamora, I.; Garcia-Villalobos, J.

2017-01-01

This paper focuses on the modelling of the performance of a Polymer Electrolyte Membrane Fuel Cell (PEMFC)-based cogeneration system to integrate it in hybrid and/or connected to grid systems and enable the optimization of the techno-economic efficiency of the system in which it is integrated. To this end, experimental tests on a PEMFC-based cogeneration system of 600 W of electrical power have been performed to train an Artificial Neural Network (ANN). Once the learning of the ANN, it has been able to emulate real operating conditions, such as the cooling water out temperature and the hydrogen consumption of the PEMFC depending on several variables, such as the electric power demanded, temperature of the inlet water flow to the cooling circuit, cooling water flow and the heat demanded to the CHP system. After analysing the results, it is concluded that the presented model reproduces with enough accuracy and precision the performance of the experimented PEMFC, thus enabling the use of the model and the ANN learning methodology to model other PEMFC-based cogeneration systems and integrate them in techno-economic efficiency optimization control systems. - Highlights: • The effect of the energy demand variation on the PEMFC's efficiency is predicted. • The model relies on experimental data obtained from a 600 W PEMFC. • It provides the temperature and the hydrogen consumption with good accuracy. • The range in which the global energy efficiency could be improved is provided.

Sector 7-8 powered up

CERN Document Server

2007-01-01

1. Frédéric Gicquel from the Cryogenics for Accelerators Group (AT/ACR) and Anupama Kulkarni from the Magnets and Electrical Systems Group (AT/MEL) at the CERN Control Centre during the powering-up of Sector 7-8. 2. Frédérick Bordry, leader of the Power Converter Group (AB/PO), and Roberto Saban, responsible for coordinating the LHC commissioning (TS/HDO), celebrate the end of the first powering-up of an entire LHC sector: Sector 7-8.

Cybersecurity Public Sector Threats and Responses

CERN Document Server

Andreasson, Kim J

2011-01-01

The Internet has given rise to new opportunities for the public sector to improve efficiency and better serve constituents in the form of e-government. But with a rapidly growing user base globally and an increasing reliance on the Internet, digital tools are also exposing the public sector to new risks. An accessible primer, Cybersecurity: Public Sector Threats and Responses focuses on the convergence of globalization, connectivity, and the migration of public sector functions online. It identifies the challenges you need to be aware of and examines emerging trends and strategies from around

Sectoral Market Mechanisms

Energy Technology Data Exchange (ETDEWEB)

NONE

2009-07-01

This paper first reviews proposals for the design of sectoral and related market mechanisms currently debated, both in the UNFCCC negotiations, and in different domestic legislative contexts. Secondly, it addresses the possible principles and technical requirements that Parties may wish to consider as the foundations for further elaboration of the mechanisms. The third issue explored herein is domestic implementation of sectoral market mechanisms by host countries, incentives to move to new market mechanisms, as well as how the transition between current and future mechanisms could be managed.

Flexible 75 kWel Stirling CHP-plant for bio-fuels with low emissions and a high fuel utilization. Final technical report

Energy Technology Data Exchange (ETDEWEB)

2011-07-01

The objective of the project ''Flexible 75 kWel Stirling CHP-plant for bio-fuels with low emissions and a high fuel utilization'' was to combine the Danish experiences with the Stirling engine and updraft gasification with the application of the FLOX gas burner technology for developing and demonstrating a flexible biomass-based small scale CHP plant with 75 kW electrical output, high power efficiency and low emissions. Further, the project has aimed at increasing the technology's reliability and decreasing the need for service. Also, the project has included the development of a control and communication system for unmanned start-up and operation of the plant. During the project the objective was altered and so the development of a new Stirling engine design was done on the 4-cylindred 35 kWe Stirling engine instead of the 8-cylindred 75 kWe Stirling engine. Focus has been on designing a more durable engine designed for easy and fast service. Cold test of the engine has been successful and now full-scale hot tests are to be performed. In the project Stirling DK has also in cooperation with project partner Danish gas Technology Centre developed the Stirling Engine with Diluted Oxidation (SEDIOX) concept which is a combustion technology based on the diluted oxidation principle. A trademark is obtained and also a patent application is filed and pending regarding the SEDIOX combustion chamber concept. All components for the Stirling gasification plant were produced and installed at Svanholm Estate. The plant consisted of one conventional combustion chamber and one SD3E-type Stirling engine. The plant was commissioned in June 2009 and 1,472 hours of operation and 43 MWh of electricity production was achieved before the plant was de-commissioned in February 2010 due to divergences between Svanholm Estate and Stirling DK. During operation the control system including remote access was tested thoroughly and with great success. The new overall

Application of safety and reliability approaches in the power sector: Inside-sectoral overview

DEFF Research Database (Denmark)

Kozine, Igor

2010-01-01

This chapter summarizes the state-of-the-art and state-of-practice on the applications of safety and reliability approaches in the Power Sector. The nature and composition of this industrial sector including the characteristics of major hazards are summarized. The present situation with regard...... to a number of key technical aspects involved in the use of safety and reliability approaches in the power sector is discussed. Based on this review a Technology Maturity Matrix is synthesized. Barriers to the wider use of risk and reliability methods in the design and operation of power installations...... are identified and possible ways of overcoming these barriers are suggested. Key issues and priorities for research are identified....

The Information Sector: Definition and Measurement.

Science.gov (United States)

Porat, Marc U.

In the last 20 years the U.S. economy had changed as a result of the increase in production, processing, and distribution of information goods and services. Three information sectors--the primary sector producing information goods and services, the private bureaucracy, and the public bureaucracy--are part of a six-sector economy. Today,…

[The productive sector].

Science.gov (United States)

Santolaria, Encarna; Fernández, Alberto; Daponte, Antonio; Aguilera, I

2004-05-01

In the last 25 years, the production sector in Spain has undergone important changes. Among these changes, the important growth of the services sector at the expense of the primary sector, the increasing flexibility of the labour market, and the rise in the female workforce could be considered as the most relevant ones. Spanish women have higher rates of unemployment, temporary jobs and part time contracts than Spanish men. Moreover, job access and work conditions are highly related to gender and social class. Because women are forced to compensate for the scarcity of social services for caring for young children and for dependent elderly, they become informal and socially unrecognised caregivers, preventing them from getting or holding a job, and significantly limiting their opportunities for professional development. These social conditions are closely related with the fact that work conditions for women involve higher temporality rates and shorter contracts than those of men, given the sectors and jobs in which they tend to work (due to segregation). Similarly, workers of the less privileged social classes have poorer work conditions. Thus, women of the lower income class are mainly suffering the worst job contracts and the poorest work conditions. More social services are needed to make it possible to attend to family needs and still be able to access and maintain a job contract. Policies tending to conciliate labour and family life are indispensable and should incorporate measures to equally distribute the house keeping activities between women and men.

Combined heat and power in industry and buildings

International Nuclear Information System (INIS)

Hinnells, Mark

2008-01-01

Combined heat and power (CHP) has huge potential to deliver energy savings and emissions reductions, and in many cases cost reductions too. But the market and regulatory framework is the key to delivering large-scale installations, and government has a poor record in delivering an appropriate framework. Technology is central to the future competitiveness and therefore uptake of CHP. It could lead to more efficient CHP electricity generation, permit the use of lower-carbon, renewable fuels, and enable the development of new products for new end uses, including micro-CHP and CHP in heat networks. The market for CHP has been difficult in the past few years, largely as a result of government market reforms. The UK's level of CHP skills, for installing current technologies and developing new ones, is low. The key issue is the creation of the right market framework to deliver CHP, and part of this is support for the energy services approach

Introduction of EDI in the public sector

DEFF Research Database (Denmark)

Falch, Morten

1997-01-01

Reviews the status of EDI in the sectors of health, public transport and taxation and public administration. The impact of this on the diffusion of EDI in other sectors is analysed.......Reviews the status of EDI in the sectors of health, public transport and taxation and public administration. The impact of this on the diffusion of EDI in other sectors is analysed....

Role of the private sector in vaccination service delivery in India: evidence from private-sector vaccine sales data, 2009-12.

Science.gov (United States)

Sharma, Abhishek; Kaplan, Warren A; Chokshi, Maulik; Zodpey, Sanjay P

2016-09-01

India's Universal Immunization Programme (UIP) provides basic vaccines free-of-cost in the public sector, yet national vaccination coverage is poor. The Government of India has urged an expanded role for the private sector to help achieve universal immunization coverage. We conducted a state-by-state analysis of the role of the private sector in vaccinating Indian children against each of the six primary childhood diseases covered under India's UIP. We analyzed IMS Health data on Indian private-sector vaccine sales, 2011 Indian Census data and national household surveys (DHS/NFHS 2005-06 and UNICEF CES 2009) to estimate the percentage of vaccinated children among the 2009-12 birth cohort who received a given vaccine in the private sector in 16 Indian states. We also analyzed the estimated private-sector vaccine shares as function of state-specific socio-economic status. Overall in 16 states, the private sector contributed 4.7% towards tuberculosis (Bacillus Calmette-Guérin (BCG)), 3.5% towards measles, 2.3% towards diphtheria-pertussis-tetanus (DPT3) and 7.6% towards polio (OPV3) overall (both public and private sectors) vaccination coverage. Certain low income states (Uttar Pradesh, Rajasthan, Madhya Pradesh, Orissa, Assam and Bihar) have low private as well as public sector vaccination coverage. The private sector's role has been limited primarily to the high income states as opposed to these low income states where the majority of Indian children live. Urban areas with good access to the private sector and the ability to pay increases the Indian population's willingness to access private-sector vaccination services. In India, the public sector offers vaccination services to the majority of the population but the private sector should not be neglected as it could potentially improve overall vaccination coverage. The government could train and incentivize a wider range of private-sector health professionals to help deliver the vaccines, especially in the low

Chemical and Petrochemical Sector

Energy Technology Data Exchange (ETDEWEB)

NONE

2009-07-01

This publication is a background document on the global chemical and petrochemical sector for the IEA publication Energy Technology Transitions in Industry (IEA, 2009). It provides further, more detailed information on the methodology and data issues for energy efficiency indicators for the sector. The indicators discussed offer insight regarding the energy efficiency improvement potential in the short- to medium-term (by proven technologies).

Sectoral dynamics and technological convergence: an evolutionary analysis of eco-innovation in the automotive sector

DEFF Research Database (Denmark)

Faria, Lourenco; Andersen, Maj Munch

2017-01-01

We know from evolutionary theory that sectoral characteristics are important to innovation. This paper investigates if sectoral characteristics also are important to eco-innovation, a hitherto under-researched theme. We argue that research into possible sectoral patterns in eco-innovation is key...... 1965 to 2012, focusing on powertrain technologies. The empirical analysis is based on patent data amongst big car producers and focuses on identifying changes in two main aspects: (1) the convergence/divergence of firms’ green strategies and technologies within the automotive sector; and (2......) the contribution of alternative key green technological trajectories relative to the dominant design. Our findings indicate that the evolution of relative green patenting has followed a positive, linear growth over the last decades with increasing participation of alternative propulsion technologies and increasing...

Government services: sector skills assessment 2012

OpenAIRE

Parry, Jon; Ojo, Adegbola

2012-01-01

The aim of this report is to provide authoritative labour market intelligence (LMI) for the Government Services sector to inform the strategic decision making of national governments in the development of employment and skills policy. It is one of 15 UK Sector Skills Assessment (SSA) reports produced by Sector Skills Councils and the UK Commission for Employment and Skills.

Lessons Learned from the Private Sector

Energy Technology Data Exchange (ETDEWEB)

Robichaud, Robert J [National Renewable Energy Laboratory (NREL), Golden, CO (United States)

2017-09-07

This session is focused on lessons learned from private sector energy projects that could be applied to the federal sector. This presentation tees up the subsequent presentations by outlining the differences between private and federal sectors in objectives, metrics for determining success, funding resources/mechanisms, payback and ROI evaluation, risk tolerance/aversion, new technology adoption perspectives, and contracting mechanisms.

Health sector reform and public sector health worker motivation: a conceptual framework.

Science.gov (United States)

Franco, Lynne Miller; Bennett, Sara; Kanfer, Ruth

2002-04-01

Motivation in the work context can be defined as an individual's degree of willingness to exert and maintain an effort towards organizational goals. Health sector performance is critically dependent on worker motivation, with service quality, efficiency, and equity, all directly mediated by workers' willingness to apply themselves to their tasks. Resource availability and worker competence are essential but not sufficient to ensure desired worker performance. While financial incentives may be important determinants of worker motivation, they alone cannot and have not resolved all worker motivation problems. Worker motivation is a complex process and crosses many disciplinary boundaries, including economics, psychology, organizational development, human resource management, and sociology. This paper discusses the many layers of influences upon health worker motivation: the internal individual-level determinants, determinants that operate at organizational (work context) level, and determinants stemming from interactions with the broader societal culture. Worker motivation will be affected by health sector reforms which potentially affect organizational culture, reporting structures, human resource management, channels of accountability, types of interactions with clients and communities, etc. The conceptual model described in this paper clarifies ways in which worker motivation is influenced and how health sector reform can positively affect worker motivation. Among others, health sector policy makers can better facilitate goal congruence (between workers and the organizations they work for) and improved worker motivation by considering the following in their design and implementation of health sector reforms: addressing multiple channels for worker motivation, recognizing the importance of communication and leadership for reforms, identifying organizational and cultural values that might facilitate or impede implementation of reforms, and understanding that reforms

Workplace violence in service sectors with implications for the education sector : issues, solutions and resources

OpenAIRE

Verdugo, Richard; Vere, Anamaria

2003-01-01

Examines the causes of workplace violence and stress and investigates the scope of violence and stress in the education sector and its impact on the sector and its workforce. Explores strategies to remedy the problem.

The increased importance of sector switching

DEFF Research Database (Denmark)

Frederiksen, Anders; Hansen, Jesper Rosenberg

2017-01-01

Sector switching is an important phenomenon that casts light on public–private differences. Yet our knowledge about its prevalence and trends is limited. We study sector switching using unique Danish register-based employer–employee data covering more than 25 years. We find that sector switching...... constitutes 18.5% of all job-to-job mobility, and the trend is increasing both from public to private and from private to public. Sector switching is also generally increasing for middle managers, but for administrative professionals only the flows from private to public increase and for top managers only...... the flows from public to private increase....

MARKET CONCENTRATION IN TURKISH JOURNALISM SECTOR

Directory of Open Access Journals (Sweden)

ADEM KALÇA

2013-05-01

Full Text Available Concentration is a situation in which market structure of a sector is controlled by a few firms. At the present time, many analyzing methods such as Herfindahl-Hirschman and N-Firm Concentration Indexes are used to determine market structure.According to market concentration indexes, higher concentration level means more monopolistic market structure, lower concentration level means more full competitive market structure. In this study concentration levels of media groups in Turkish journalism sector within the scope of traditional journalism and internet journalism was analyzed via N-Firm Concentration and H-H Indexes. As a result of the study, it’s seen that first four biggest media groups have monopolistic competition in internet journalism sector,and oligopol structure in traditional journalism sector. According to H-H index analyze, there is monopolistic competition in the sector.

Determination of consumption biogenic solid fuels in the commercial sector, trade, services (tertiary sector). Final report

International Nuclear Information System (INIS)

Viehmann, Cornelia; Westerkamp, Tanja; Schwenker, Andre; Schenker, Marian; Thraen, Daniela; Lenz, Volker; Ebert, Marcel

2012-01-01

The policy has both national and European level ambitious program aimed at expansion of renewable energy and related to the reduction of greenhouse gas emissions. In the national action plan for renewable energy of the Federal Republic of Germany these goals are defined by 2020. The share of renewable energy in the provision of heat and cold should therefore rise from 6.6% to 15.5% of gross final energy consumption. According to the increasing importance of solar-thermal, near-surface and geothermal heat, the relative share of biomass is decreasing. However biomass makes with those listed in the national action plan with 79% an essential amount in regenerative heat market [BMU 2010]. For the pursuit of goals and reviews, the support measures and packages of measures which are initiated in this context, a regular and timely reporting on the development of the above objectives is mandatory. The diverse and growing reporting requirements such as in the EU directive on the promotion of renewable energy, require, however well-founded knowledge of the sector-specific energy consumption from renewable sources. While the data available for use of biogenic solid fuels in the sectors household and industry has improved significantly in recent years, for the sector commercial sector, trade, services (tertiary sector) reliable figures are still lacking. Against this background, the objective is to present study, in close cooperation with the Federal Environment Agency (UBA), the determination of the final energy consumption biogenic solid fuels in the tertiary sector in Germany for the year 2008. The basis is, in addition to the development of the current knowledge of the energy and heat consumption, the delimitation and characterization of the sector and the development of an extrapolation tools. The demand for this tool is its expandability and update possibility. From the industry-nonspecific and industry-specific input data can be derived, collecting for the extrapolation

Advanced Echocardiography for the Detection of Left Ventricular Dysfunction in Aortic Regurgitation

DEFF Research Database (Denmark)

Olsen, Thue

2010-01-01

BAGGRUND Aortainsufficiens kan forårsage kardiel dysfunktion, hjertesvigt og død. Kirurgisk aortaklapudskiftning er en effektiv behandling, men kun hvis den gennemføres, før der er udviklet åbenlys kardiel dysfunktion. Der er behov for bedre metoder til at karakterisere kardiel dysfunktion, idet ...

RoboWeedMaPS - Demo DroneApp beta med DJI Phantom 4

DEFF Research Database (Denmark)

2017-01-01

Video. Dette er en uformel præsentation af et software til dronebaseret indsamling af nærbilleder i marken af specielt ukrudt. Vi udviklede App'en, da der ikke var et produkt på markedet, som kunne opfylde vore ønsker til en effektiv billedindsamling i landmandens marker....

Samarbejdets betydning i den ’klassiske udlicitering’

DEFF Research Database (Denmark)

Lindholst, Andrej Christian

2015-01-01

Hvilken betydning har ’samarbejde’ i kontraktstyringen mellem offentlige myndigheder og private entreprenører inden for de ’klassiske’ udbudsområder? I både den administrative praksis og den politologiske litteratur betragtes en effektiv anvendelse af udlicitering på de klassiske udbudsområder of...

Indicadores : El sector financiero colombiano

Directory of Open Access Journals (Sweden)

Carlos Andrés Giraldo Rendón

2002-07-01

Full Text Available Este artículo analiza datos estadísticos que pueden revelar la situación actual -2002- del sector financiero en Colombia. Luego de mostrar algunas series temporales como los depósitos en cuenta corriente y las utilidades del sector se llega a la conclusión de que el sector se ha recuperado pero aún existen preocupaciones por causa de la evolución de la cartera hipotecaria y la difícil situación económica internacional que no permite una recuperación sostenible.

Are US utility standby rates inhibiting diffusion of customer-owned generating systems?

International Nuclear Information System (INIS)

Jackson, Jerry

2007-01-01

New, small-scale electric generation technologies permit utility customers to generate some of their own electric power and to utilize waste heat for space heating and other applications at the building site. This combined heat and power (CHP) characteristic can provide significant energy-cost savings. However, most current US utility regulations leave CHP standby rate specification largely to utility discretion resulting in claims by CHP advocates that excessive standby rates are significantly reducing CHP-related savings and inhibiting CHP diffusion. The impacts of standby rates on the adoption of CHP are difficult to determine; however, because of the characteristically slow nature of new technology diffusion. This study develops an agent-based microsimulation model of CHP technology choice using cellular automata to represent new technology information dispersion and knowledge acquisition. Applying the model as an n-factorial experiment quantifies the impacts of standby rates on CHP technologies under alternative diffusion paths. Analysis of a sample utility indicates that, regardless of the likely diffusion process, reducing standby rates to reflect the cost of serving a large number of small, spatially clustered CHP systems significantly increases the adoption of these technologies

Mergers & Acquisitions in India: A sectoral analysis

Directory of Open Access Journals (Sweden)

Priya Bhalla

2014-07-01

Full Text Available Globalization, deregulation and technological improvements have resulted in increase in M&A across the globe. There is enormous literature existing in the advanced economies. However, very little information is available regarding M&A in India. Various sectors have witnessed differential involvement in M&A activity indicating higher participation by some. Particularly, certain sectors such as financial services and pharmaceuticals demonstrate higher M&A activity. To emphasise differential importance of sectors in M&A activity, it is necessary to conduct a sector-wise analysis. Accordingly, this study attempts to investigate the differential representation of various sectors in M&A. Further, it explores the role played by India in the rising global M&A activity. In light of this, it specifies the factors driving consolidation in the financial sector globally.

Efficiency of the Macedonian banking sector

Directory of Open Access Journals (Sweden)

Naumovska Elena

2016-01-01

Full Text Available The subject of this paper is to measure the efficiency of the Macedonian banking sector by applying two approaches: firstly, comparative analysis on the efficiency indicators of the banking sector in the Republic of Macedonia and the countries of Central and Southeastern Europe (CSEE and secondly, Data Envelopment Analysis (DEA. The aim is to provide directions and guidelines for further strengthening of the Macedonian banking sector. According to the comparative analysis of the efficiency indicators (net interest margin and operating costs of the Macedonian banking sector and the countries of CSEE, the countries whose banking sector shows lower operating costs are characterized with a higher level of financial deepening and greater degree of financial intermediation. The high interest margins direct towards unsuitable allocation of financial resources and insufficient competitiveness in the domestic banking sector. When applying the DEA approach, it can be stated that the group of large banks marks the highest efficiency within the Macedonian banking sector. The high concentration degree of banking activities within the group of large banks with a leading role in determining the interest rates, results in a rigid interest policy of the banks. In the direction of strengthening the efficiency of the Macedonian banking sector as a whole, the obtained results show that it is necessary for the banks to be further consolidated so as to utilize the advantages of the economies of scale, increase competitiveness, offer a diversified structure of products, invest in new contemporary software solutions that will allow reinforcement of their employees’ productivity and long-term reduction of the operating costs, as well.

Comprehensive Assessment of the Potential for Efficient District Heating and Cooling and for High-Efficient Cogeneration in Austria

Directory of Open Access Journals (Sweden)

Richard Büchele

2016-12-01

Full Text Available In accordance with the EU Energy Efficiency Directive all Member States have to develop a comprehensive assessment of the potential for high-efficient CHP and efficient district heating and cooling by the end of 2015. This paper describes the approach and methodology used to determine the district heating potentials for Austria. In a first step actual and future heating and cooling demand in the building sector is evaluated using the techno-economic bottom-up model Invert/EE-Lab. Relevant infrastructure probably existing in 2025 is investigated and included into the analysis. Technical potentials for efficient technologies are calculated. After a classification of relevant regions into main and secondary regions a country-level cost-benefit-analysis is performed. The results indicate that there is a reasonable additional potential for district heating by the year 2025 under our central scenario assumptions and within sensitivity scenarios. Only in scenarios with high CO2-price or low gas price, CHP is an economically efficient solution to supply district heat.

System control and communication

International Nuclear Information System (INIS)

Bindner, H.; Oestergaard, J.

2005-01-01

Rapid and ongoing development in the energy sector has consequences for system control at all levels. In relation to system control and communication the control system is challenged in five important ways: 1) Expectations for security of supply, robustness and vulnerability are becoming more stringent, and the control system plays a big part in meeting these expectations. 2) Services are becoming increasingly based on markets that involve the transmission system operators (TSOs), generators and distribution companies. Timely, accurate and secure communication is essential to the smooth running of the markets. 3) Adding large amounts of renewable energy (RE) to the mix is a challenge for control systems because of the intermittent availability of many RE sources. 4) Increasing the number of active components in the system, such as small CHP plants, micro-CHP and intelligent loads, means that the system control will be much more complex. 5) In the future it is likely that power, heat, gas, transport and communication systems will be tighter coupled and interact much more. (au)

Safety in the Transport Sector

DEFF Research Database (Denmark)

Jørgensen, Kirsten

2012-01-01

In EU the transport sector has an incident rate of accidents at work at 40 pr 1000 employees. The Danish insurance company CODAN has insured a big part of this sector concerning transport of gods on shore. The purpose of the project is to document the safety problems in the sector and to develop...... a strategy for a preventive intervention in transport enterprises. The results will in the end be included in a new strategy for the insurance company and the transport sectores organization towards a better safety performance. The safety problems for the employees are the activities carried out by loading......, unloading or work with transport equipment carried out at many different work places. The main safety problems are falls, heavy lifting, poor ergonomic working conditions, hits or collisions with gods, equipments or falling objects, the traffic risk situations, work with animals and finally the risk...

Interplanetary sector boundaries 1971--1973

International Nuclear Information System (INIS)

Klein, L.; Burlaga, L.F.

1980-01-01

Eighteen interplanetary sector boundary crossings observed at 1 AU during the period January 1971 to January 1974 by the magnetometer on the Imp 6 spacecraft was discussed. The events were examined on many different time scales ranging from days on either side of the boundary to high-resolution measurements of 12.5 vectors per second. Two categories of boundaries were found, one group being relatively thin (averaging approx. =10 4 km) and the other being thick (averaging approx. =10 6 km). In many cases the field vector rotated in a plane from polarity to the other. Only two of the transitions were null sheets. Using the minimum variance analysis to determine the normals to the plane of rotationa and assuming that this is the same as the normal to the sector boundary surface, it was found that the normals were close to ( 0 ) the ecliptic plane. The high inclination of the sector boundary surfaces during 1971--1973 verifies a published prediction and may be related to the presence of large equatorial coronal holes at this time. An analysis of tangential discontinuities contained in 4-day periods about our events showed that their orientations were generally not related to the orientations of the sector boundary surface, but rather their characteristics were about the same as those for discontinuities outside the sector boundaries. Magnetic holes were found in thick sector boundaries, at a rate about 3 times that elsewhere. The holes were especially prevalent near stream interfaces, suggesting that they might be related to the convergence and/or slip of adjacent solar wind streams

Public Sector and Europeanization Challenges

Directory of Open Access Journals (Sweden)

Lucica Matei

2006-04-01

Full Text Available The paper emphasises the role of the market-type mechanisms within the activity of the organisations from the public sector. The end of the 20th century was defined by the effects of the public sector reform. The public sector is placed within the cultural and political environment of each country and the reforms have aimed to redefine the structures of the state organisations in the economy and the relationships such as market-government, government-bureaucracy, government- citizens, bureaucracy-citizens, civil servants-politicians-citizens. The public sector reform, achieved at the managerial systems, organisational structures and regulations levels is accompanied by specific and structural reforms. Accepting the market-type mechanisms instead of bureaucratic mechanisms, meaning not the simple provision of public services but the creation of some governmental “actors”, functioning completely on commercial bases, supporting the development of the partnerships between the public and private sector, introducing privatisation is achieved in view of creating “the facilitating state”. We discuss about “facilities” such as citizens and society involvement in public businesses, making public administration more citizen-friendly and the state closer to the public need. The citizens’ involvement, as customers in the flow of the public service contributes to creating an organic ensemble characterised by two fundamental dimensions: level and type of influence of the customers and the private-public dichotomy. Synthesising, the relationships and market mechanisms enable to the public sector to get closer to the public needs and to create a modern administration based on efficiency, effectiveness and openness towards change.

Energetic and exergetic analysis of steam production for the extraction of coniferous essential oils

International Nuclear Information System (INIS)

Friso, Dario; Grigolato, Stefano; Cavalli, Raffaele

2011-01-01

Bioenergy production is optimal when the energy production process is both efficient and benefits from local resources. Energetic and exergetic analyses are applied to highlight efficiency differences between small-size systems that are based on the co-generation of heating and power (CHP) versus the co-generation of heating and power with steam production (CHP-S). Both systems use the Organic fluid Rankine Cycle (ORC). The recovery of heat from flue gases is considered to be a way of increasing energy efficiency. In the CHP-S case, steam (at low pressure) is used to extract essential oils from fresh twigs and needles of coniferous trees throughout a steam distillation process. When the systems work at a thermal combustion power of 1350 kW, energetic analysis shows that the energy efficiency of the CHP-S plant (89.4%) is higher than that of the CHP plant (77.9%). Exergetic analysis shows that the efficiency of the CHP-S plant is 2.2% higher than that of the CHP plant. -- Highlights: → Bioenergy production is optimal when the energy production process is efficient. → Energetic and exergetic analyses are applied to highlight efficiency differences between the co-generation of heating and power (CHP) versus the co-generation of heating and power with steam production (CHP-S). → The recovery of heat from flue gases is a way of increasing energy efficiency. → The energetic and exergetic analysis shows that the efficiency of the CHP-S plant is higher than that of the CHP plant.

Application of multi-criteria decision-making model for choice of the optimal solution for meeting heat demand in the centralized supply system in Belgrade

International Nuclear Information System (INIS)

Grujić, Miodrag; Ivezić, Dejan; Živković, Marija

2014-01-01

The expected growth of living standard, number of inhabitants and development of technology, industry and agriculture will cause a significant increase of energy consumption in cities. Three scenarios of energy sector development until 2030 and corresponding energy consumption for the city of Belgrade are analyzed in this paper. These scenarios consider different level of economic development, investments in energy sector, substitution of fossil fuels, introduction of renewable energy sources and implementation of energy efficiency measures. The proposed model for selection of optimal district heating system compares different options for fulfilling expected new heat demand through eight criteria for each scenario. Proposed options are combination of different energy sources and technologies for their use. The criteria weights are set according to Serbian economy and energy position. The criteria include financial aspects, environmental impact and availability of energy. Multi-criteria method ELECTRE (ELimination Et Choix Traduisant la REalite) is used as a tool for obtaining the optimal option. It is concluded that combination of CHP (combined heat and power) plant and centralized use of geothermal energy is optimal choice in the optimistic scenario. In the pessimistic and business as usual scenario the optimal option is combination of new gas boilers and centralized use of geothermal energy. - Highlights: • Three scenarios for meeting new heat demand are developed and assessed. • Constructing CHP (combined heat and power) is desirable in case of significant electricity price growth. • In all scenarios the chosen option includes using geothermal energy for heating

India's Downstream Petroleum Sector

Energy Technology Data Exchange (ETDEWEB)

NONE

2010-07-01

This study provides a holistic examination of pricing and investment dynamics in India's downstream petroleum sector. It analyses the current pricing practices, highlights the tremendous fiscal cost of current pricing and regulatory arrangements, and examines the sectoral investment dynamics. It also looks at potential paths towards market-based reform along which the Indian government may move, while at the same time protecting energy market access for India's large poor population.

Speedy changes in energy sector

International Nuclear Information System (INIS)

Kazlauskas, J.

1998-01-01

Status of the reforms in Lithuania's energy sector and preparation of updated Energy Strategy is presented in this article. The new Strategy has been worked out considering the conclusions of different studies as well as the changes that have taken place in Lithuania and restructuring of its energy sector, the guidelines of the European Union. The principal objectives of the country's energy sector consists in reliable and safe energy supply with minimum expenses, increasing efficiency of energy utilisation, introducing principles of market economy within the sector, reducing environmental impacts, preparing Lithuania's energy sector for integration into the EU. In the field of nuclear energy the top priority is to ensure the safety of Ignalina NPP. Ignalina NPP will only be operated if and as long as it is safe. Two most likely scenarios for the future operation of Ignalina NPP are analysed in the draft Strategy. According to scenario 1, reactor 1 and 2 are to be operated half of the design service life, until 2005 and 2010 respectively, i.e. until the gap between the graphite and fuel channels reaches the critical margin. In accordance with the second scenario, the fuel channels are to be replaced as envisaged in the design, after which the reactors may be operated for another 10 - 15 years

Engineering in the energy sector. The single market and the engineering sector

International Nuclear Information System (INIS)

Garcia Rodrigues, A.

1993-01-01

Projects with large infrastructures, particularly those in the field of energy, provide a strong boost to certain industrial sectors in the country. In the case of Spain, the policy of direct management 'by components' of these projects - hydroelectric power plants, petrochemical plants, thermoelectric plants and nuclear power plants - adopted by the electric utility owners has furthered not only the local equipment manufacturing industry but also the engineering sector. At present, with full implementation of the Single Market in sight, it is particularly interesting for Spain to continue building up a powerful engineering sector, increasing its size and usefulness, and extending its traditional areas of action to other technologies, more on the lines of engineering and consulting firms in the USA than in the rest of Europe. The intention is to endow our equipment and construction companies with the skills necessary to enable them to compete with large European conglomerates in their respective sectors. The structure of these conglomerates usually contains engineering capabilities which are not habitual in our industry. Examples are given, showing how this model has been used to compete and win awards for important international projects. A specific analysis has been made of the position of Spanish engineering and industry in nuclear power generation projects in the former Soviet Union and East European countries, in which large investments are expected to be made. (author)

Between Public - Private Partnerships and public finance in the public infrastructure sector: The water and sanitation sector in Albania

Directory of Open Access Journals (Sweden)

Fjona Zeneli

2017-03-01

Full Text Available It’s known in the literature that public-private partnerships (PPPs are one the main instruments that permit private collaboration in projects that are public otherwise. It’s also clear that their implementation is different depending on the rules of the countries, their market level of acceptance etc. The first objective of this paper is to revise PPPs projects in the water sector in Albania, seen in the context of alternative financing ways for joint-stock companies of Albanian water sector, due to the nature of the market (a developing emerging market, in the context of bad financial times after 2008 (the start of the international financial crisis. The second objective is to describe the development of the Albanian legislation for management contracts introduced for the first time in the waters and sanitation sector in 2004 and privatization practices in public sector. The main conclusion is that in the developing markets creating possibilities for private sector participation in the infrastructure public services (especially in the drinking water and sanitation sector will be seen with skepticism because of failed previous privatization practices or the sensitivity degree of the water sector related to the penetration level of private factor in the sector. Public finance will be explored as a convenient alternative.

Afgivelse af formue til trusts

DEFF Research Database (Denmark)

Feldthusen, Rasmus Kristian

2009-01-01

Kravet om at en stifter skal have foretaget en "uigenkaldelig og effektiv udskillelse" for at dansk skatteret vil anerkende at der foreligger en trust vurderes. Kravet er senest lagt til grund i SKM 2009.249 SR. Forfatteren opfordrer til, at SKAT i stedet foretager en konkret vurdering af selve...

Performance measurement in transport sector analysis

Directory of Open Access Journals (Sweden)

M. Išoraitė

2004-06-01

Full Text Available The article analyses the following issues: 1. Performance measurement in literature. The performance measurement has an important role to play in the efficient and effective management of organizations. Kaplan and Johnson highlighted the failure of the financial measures to reflect changes in the competitive circumstances and strategies of modern organizations. Many authors have focused attention on how organizations can design more appropriate measurement systems. Based on literature, consultancy experience and action research, numerous processes have been developed that organizations can follow in order to design and implement systems. Many frameworks have been proposed that support these processes. The objective of such frameworks is to help organizations define a set of measures that reflect their objectives and assess their performance appropriately. 2. Transport sector performance and its impacts measuring. The purpose of transport measurement is to identify opportunities enhancing transport performance. Successful transport sector management requires a system to analyze its efficiency and effectiveness as well as plan interventions if transport sector performance needs improvement. Transport impacts must be measurable and monitorable so that the person responsible for the project intervention can decide when and how to influence them. Performance indicators provide a means to measure and monitor impacts. These indicators essentially reflect quantitative and qualitative aspects of impacts at given time and places. 3. Transport sector output and input. Transport sector inputs are the resources required to deliver transport sector outputs. Transport sector inputs are typically: human resources, particularly skilled resources (including specialists consulting inputs; technology processes such as equipment and work; and finance, both public and private. 4. Transport sector policy and institutional framework; 5. Cause – effect linkages; 6

Health-care sector and complementary medicine: practitioners' experiences of delivering acupuncture in the public and private sectors.

Science.gov (United States)

Bishop, Felicity L; Amos, Nicola; Yu, He; Lewith, George T

2012-07-01

The aim was to identify similarities and differences between private practice and the National Health Service (NHS) in practitioners' experiences of delivering acupuncture to treat pain. We wished to identify differences that could affect patients' experiences and inform our understanding of how trials conducted in private clinics relate to NHS clinical practice. Acupuncture is commonly used in primary care for lower back pain and is recommended in the National Institute for Health and Clinical Excellence's guidelines. Previous studies have identified differences in patients' accounts of receiving acupuncture in the NHS and in the private sector. The major recent UK trial of acupuncture for back pain was conducted in the private sector. Semi-structured qualitative interviews were conducted with 16 acupuncturists who had experience of working in the private sector (n = 7), in the NHS (n =3), and in both the sectors (n = 6). The interviews lasted between 24 and 77 min (median=49 min) and explored acupuncturists' experiences of treating patients in pain. Inductive thematic analysis was used to identify similarities and differences across private practice and the NHS. The perceived effectiveness of acupuncture was described consistently and participants felt they did (or would) deliver acupuncture similarly in NHS and in private practice. In both the sectors, patients sought acupuncture as a last resort and acupuncturist-patient relationships were deemed important. Acupuncture availability differed across sectors: in the NHS it was constrained by Trust policies and in the private sector by patients' financial resources. There were greater opportunities for autonomous practice in the private sector and regulation was important for different reasons in each sector. In general, NHS practitioners had Western-focussed training and also used conventional medical techniques, whereas private practitioners were more likely to have Traditional Chinese training and to practise

The Danish Social Housing Sector

DEFF Research Database (Denmark)

Nielsen, Rikke Skovgaard; Haagerup, Christian Deichmann

2017-01-01

With Denmark faring reasonably well through the global financial crisis, the policy changes to the social housing sector caused by the crisis have been limited. Nevertheless, changes have taken place nonetheless both in terms of policy and in the residential composition of the sector which polici...

Vacuum status-display and sector-conditioning programs

International Nuclear Information System (INIS)

Skelly, J.; Yen, S.

1989-01-01

Two programs have been developed for observation and control of the AGS vacuum system, which include these notable features: they incorporate a graphical user interface, and they are driven by a relational database which describes the vacuum system. The vacuum system comprises some 440 devices organized into 28 vacuum sectors. The Status Display Program invites menu selection of a sector, interrogates the relational database for relevant vacuum devices, acquires live readbacks, and posts a graphical display of their status. The Sector Conditioning Program likewise invites sector selection, produces the same status display, and also implements process control logic on the sector devices to pump the sector down from atmospheric pressure to high vacuum over a period extending for several hours. As additional devices are installed in the vacuum system, the devices are likewise added to the relational database; these programs then automatically include the new devices. 2 refs., 1 fig

Embodied energy use in China's industrial sectors

International Nuclear Information System (INIS)

Liu Zhu; Geng Yong; Lindner, Soeren; Zhao Hongyan; Fujita, Tsuyoshi; Guan Dabo

2012-01-01

As the world’s top energy consumer, China is facing a great challenge to solve its energy supply issue. In this paper energy use from all industrial sectors in China’s economy of 2007 was explored by conducting an extended environmental input–output analysis. We compare the energy consumption embodied in the final demand for goods and services from 29 sectors with the energy demand required for the actual production process in each sector. Two different viewpoints for sectoral energy use have been presented: energy use is directly allocated to the producer entity, and energy use is reallocated to sector’s supply chain from consumption perspective. Our results show that considerable amount of energy use is embodied in the supply chain, especially for “Construction” and “Other Service Activities” sectors, which is not detected if energy use is allocated on a production basis. When further dividing embodied energy consumption into direct energy consumption and indirect energy consumption, total indirect energy consumption is much higher than that of total direct energy consumption, accounting for 80.6% of total embodied energy consumption in 2007. Our results provide a more holistic picture on sectoral energy consumption and therefore can help decision-makers make more appropriate policies. - Highlights: ► A hybrid IO-LCA model was employed to analyze China’s energy use at sectoral level. ► A case study on China’s sectoral energy consumption is done. ► Construction and service sectors are actually energy intensive from the supply chain perspectives. ► Upstream and downstream ectoral collaboration along the whole supply chain is necessary. ► Energy conservation policies should be based upon a comprehensive analysis on sectoral energy use.

Is the public healthcare sector a more strenuous working environment than the private sector for a physician?

Science.gov (United States)

Heponiemi, Tarja; Kouvonen, Anne; Sinervo, Timo; Elovainio, Marko

2013-02-01

The present study examined the differences between physicians working in public and private health care in strenuous working environments (presence of occupational hazards, physical violence, and presenteeism) and health behaviours (alcohol consumption, body mass index, and physical activity). In addition, we examined whether gender or age moderated these potential differences. Cross-sectional survey data were compiled on 1422 female and 948 male randomly selected physicians aged 25-65 years from The Finnish Health Care Professionals Study. Logistic regression and linear regression analyses were used with adjustment for gender, age, specialisation status, working time, managerial position, and on-call duty. Occupational hazards, physical violence, and presenteeism were more commonly reported by physicians working in the public sector than by their counterparts in the private sector. Among physicians aged 50 years or younger, those who worked in the public sector consumed more alcohol than those who worked in the private sector, whereas in those aged 50 or more the reverse was true. In addition, working in the private sector was most strongly associated with lower levels of physical violence in those who were older than 50 years, and with lower levels of presenteeism among those aged 40-50 years. The present study found evidence for the public sector being a more strenuous work environment for physicians than the private sector. Our results suggest that public healthcare organisations should pay more attention to the working conditions of their employees.

East Midlands healthcare and bioscience sector strategy

OpenAIRE

East Midlands Development Agency

2007-01-01

The healthcare and bioscience sector is one of four priority sectors identified in the regional economic strategy, A Flourishing Region. This document sets out a strategy for maximising the contribution of the healthcare and biosciences sector to the economic development of the East Midlands.

The future of combined heat and power generation. Survey of the economic appeal in a liberalised energy market

International Nuclear Information System (INIS)

Van Dril, A.W.N.; Rijkers, F.A.M.; Battjes, J.J.; De Raad, A.

1999-10-01

Combined heat and power generation (CHP) has made a considerable contribution to Dutch national energy efficiency and is an important element in future energy and environmental policy programs. Recently, the effect of liberalisation of energy markets on prices and tariffs has been signalled to form a threat to CHP. This study calculates effects in two-market scenarios for a wide variety of CHP options and conditions. Results show that indeed profitability of investments in CHP has substantially decreased. Even in a scenario where electricity prices cover more than just marginal costs, most types of CHP are no longer profitable. Cash flow calculations on existing CHP projects also show a substantial decrease. Estimates on the national CHP capacity for 2010 compared to 1999 amount to a decrease in the competitive scenario and a stabilisation in the moderate scenario. The main cause is the fierce competition on the electricity market and the uncertainty whether prices will cover more than just marginal fuel costs in the near future. Part of the study was also to make an update of the technical and cost inputs of CHP projects. Investments and O and M (operation and maintenance) costs seem to have risen substantially, contributing to the decrease in profitability of CHP. 20 refs

Updated analysis of Denmark's possibilities of reducing NO{sub X} emissions; En opdateret analyse af Danmarks muligheder for at reducere emissionerne af NOx

Energy Technology Data Exchange (ETDEWEB)

COWI A/S, Kgs. Lyngby (Denmark)

2009-07-01

The update of the measures included in the 2006 analysis has given the following key results: 1) A number of measures such as boosting and reburning on power stations and other large point sources are no longer considered as relevant measures. 2) Minor revisions and adjustments have been implemented for measures in the industry, district heating sector, for mobile sources and for offshore. 3) Additional measures have been considered. This includes primarily the use of SNCR (Selective Non-Catalytic Reduction) and SCR (Selective Catalytic Reduction). Most sources of NO{sub x} emissions can be fitted with either of these abatement technologies. There is for example a potential by more frequent replacement of the catalytic elements in the SCR units. Also by increased ammonia dosing the reduction in SNCR units can be increased. These are relevant measures in waste incineration installations. The report includes rough estimates of reduction potentials and costs. The calculations show the costs and benefits of the relevant measures. The measures are ranked according to their shadow price with the damage costs of emissions of one kg NO{sub x}, being DKK 52 per kg NO{sub x}. The measures with a shadow price of less than the damage costs would give a welfare-economic surplus. This implies that the most cost-effective measures are 1) Better controls for gas engines at combined heat and power plants (CHP) 2) Optimisation of SNCR in waste incineration installations 3) Replacement to low-NO{sub x} burners at light oil fuel kettles in industry and CHP The measures in CHP and industry remove 3300 tonnes NO{sub x} in 2010. The measures imply a cost of DKK 3 million per year for the business sector and DKK 12 million per year for the government due to a loss in tax revenues. Moreover reductions can be expected from the measures within the waste incineration installations, but the exact potential has not been estimated here. A number of sensitivity analyses have been carried out

Analysis of Public Sector Efficiency in Developed Countries

Directory of Open Access Journals (Sweden)

Ivan Lovre

2017-06-01

Full Text Available The public sector in developed countries went through various forms of transformation in the twentieth century. The expansion of the public sector resulted in high levels of public spending in developed countries. The financial crisis of 2008 led to recessions in the economies of developed countries, the public debt growth, and actualized the issue of the public sector optimal size and efficiency. This study analysed the public sector efficiency in 19 developed countries. The analysis focuses on the relationship between the size of public expenditure and economic growth in the global financial crisis and the measures implemented. The aim of the research in this paper is a comparison of total and partial efficiency of the public sector in developed countries, in order to determine the characteristics of the public sector operations. The comparison covers the areas of the public sector operations in order to identify sources of inefficiency. Partial and overall efficiency of countries are analysed with different size and concept of the public sector, to determine the relationship between the public sector size, efficiency and welfare of citizens. The research results clearly indicate (unjustified state intervention in developed countries.

Private Sector and Enterprise Development

International Development Research Centre (IDRC) Digital Library (Canada)

Ministry of Technical Education and Vocational Training ..... and ..structures that offer services to private sector enterprises and represent .... investment climate reform and the adoption of good governance practices. ..... Over two-thirds of the labour force in Jordan, the West Bank & Gaza, Iraq and Syria is in the service sector.

EDI in the Public Sector

DEFF Research Database (Denmark)

Falch, Morten

1998-01-01

Introduction of EDI in the public administration is apriority for the Danish Government. EDI is both seen as a catlyst for development towards an information society ans as a means for more efficient use of scarce resources. EDI in the banking sector and the retail sector is reviewed, drivers...

Sectoral profiles of working conditions

NARCIS (Netherlands)

Houtman, I.L.D.; Andries, F.; Berg, R. van den; Dhondt, S.

2002-01-01

This report looks at trends in working conditions across different sectors Over the period 1995-2000. Basing its findings on the Third European Survey on Working Conditions (2000) in the 15 EU Member States and Norway, it examines the quality of working life in eighteen different sectors. It

Chilly dark sectors and asymmetric reheating

International Nuclear Information System (INIS)

Adshead, Peter; Cui, Yanou; Shelton, Jessie

2016-01-01

In a broad class of theories, the relic abundance of dark matter is determined by interactions internal to a thermalized dark sector, with no direct involvement of the Standard Model (SM). We point out that these theories raise an immediate cosmological question: how was the dark sector initially populated in the early universe? Motivated in part by the difficulty of accommodating large amounts of entropy carried in dark radiation with cosmic microwave background measurements of the effective number of relativistic species at recombination, N eff , we aim to establish which admissible cosmological histories can populate a thermal dark sector that never reaches thermal equilibrium with the SM. The minimal cosmological origin for such a dark sector is asymmetric reheating, when the same mechanism that populates the SM in the early universe also populates the dark sector at a lower temperature. Here we demonstrate that the resulting inevitable inflaton-mediated scattering between the dark sector and the SM can wash out a would-be temperature asymmetry, and establish the regions of parameter space where temperature asymmetries can be generated in minimal reheating scenarios. Thus obtaining a temperature asymmetry of a given size either restricts possible inflaton masses and couplings or necessitates a non-minimal cosmology for one or both sectors. As a side benefit, we develop techniques for evaluating collision terms in the relativistic Boltzmann equation when the full dependence on Bose-Einstein or Fermi-Dirac phase space distributions must be retained, and present several new results on relativistic thermal averages in an appendix.

Chilly dark sectors and asymmetric reheating

Energy Technology Data Exchange (ETDEWEB)

Adshead, Peter [Department of Physics, University of Illinois at Urbana-Champaign,Urbana, IL 61801 (United States); Cui, Yanou [Perimeter Institute for Theoretical Physics,Waterloo, Ontario N2L 2Y5 (Canada); Maryland Center for Fundamental Physics, University of Maryland,College Park, MD 20742 (United States); Shelton, Jessie [Department of Physics, University of Illinois at Urbana-Champaign,Urbana, IL 61801 (United States)

2016-06-06

In a broad class of theories, the relic abundance of dark matter is determined by interactions internal to a thermalized dark sector, with no direct involvement of the Standard Model (SM). We point out that these theories raise an immediate cosmological question: how was the dark sector initially populated in the early universe? Motivated in part by the difficulty of accommodating large amounts of entropy carried in dark radiation with cosmic microwave background measurements of the effective number of relativistic species at recombination, N{sub eff}, we aim to establish which admissible cosmological histories can populate a thermal dark sector that never reaches thermal equilibrium with the SM. The minimal cosmological origin for such a dark sector is asymmetric reheating, when the same mechanism that populates the SM in the early universe also populates the dark sector at a lower temperature. Here we demonstrate that the resulting inevitable inflaton-mediated scattering between the dark sector and the SM can wash out a would-be temperature asymmetry, and establish the regions of parameter space where temperature asymmetries can be generated in minimal reheating scenarios. Thus obtaining a temperature asymmetry of a given size either restricts possible inflaton masses and couplings or necessitates a non-minimal cosmology for one or both sectors. As a side benefit, we develop techniques for evaluating collision terms in the relativistic Boltzmann equation when the full dependence on Bose-Einstein or Fermi-Dirac phase space distributions must be retained, and present several new results on relativistic thermal averages in an appendix.

Iran’s Pharmaceutical Sectoral Innovation System

Directory of Open Access Journals (Sweden)

Bahman Kargar Shahamat

2017-12-01

Full Text Available Abstract By reviewing economic performance, two main phenomena could be identified: The first phenomenon is prior to the third wave of the Industrial Revolution in which limited resources are the predominant input; in other words, physical and natural resources are much more credited than human resources. The second phenomenon resonates with the third wave of industrial revolution to the present time, suggesting the pivotal role of humans in production and accumulation of wealth, in which limited resources are no longer considered as predominant input. The present research seeks to understand the behavioral logic of the players of Iran's pharmaceutical sector so as to infer the innovative treatment of the firms in this sector. The concept of innovative system is indebted to the efforts economists and other scientists have made by analyzing economic development based upon technological development. Meanwhile, sectoral innovation system (SIS is a tool for analyzing a technological sector in the context of evolutionary economics with an emphasis on institutional capabilities. The structure of such an approach is composed of some components through which performance analysis of certain technological sector could be made possible. In research, we use expert panel with 12 experts from Universities, Companies, Governmental institutes. The current study wishes to explain structural model of institutional elements in this technological sector. Subsequently, in light of such an explanation, structural elements of this sector would be analyzed through identification of legal and regulatory framework, innovative culture, innovative infrastructure, financial resources, information resources, technology transfer mechanisms, commercialization support and marketing.

Chilly dark sectors and asymmetric reheating

Science.gov (United States)

Adshead, Peter; Cui, Yanou; Shelton, Jessie

2016-06-01

In a broad class of theories, the relic abundance of dark matter is determined by interactions internal to a thermalized dark sector, with no direct involvement of the Standard Model (SM). We point out that these theories raise an immediate cosmological question: how was the dark sector initially populated in the early universe? Motivated in part by the difficulty of accommodating large amounts of entropy carried in dark radiation with cosmic microwave background measurements of the effective number of relativistic species at recombination, N eff , we aim to establish which admissible cosmological histories can populate a thermal dark sector that never reaches thermal equilibrium with the SM. The minimal cosmological origin for such a dark sector is asymmetric reheating, when the same mechanism that populates the SM in the early universe also populates the dark sector at a lower temperature. Here we demonstrate that the resulting inevitable inflaton-mediated scattering between the dark sector and the SM can wash out a would-be temperature asymmetry, and establish the regions of parameter space where temperature asymmetries can be generated in minimal reheating scenarios. Thus obtaining a temperature asymmetry of a given size either restricts possible inflaton masses and couplings or necessitates a non-minimal cosmology for one or both sectors. As a side benefit, we develop techniques for evaluating collision terms in the relativistic Boltzmann equation when the full dependence on Bose-Einstein or Fermi-Dirac phase space distributions must be retained, and present several new results on relativistic thermal averages in an appendix.

Sector retinitis pigmentosa.

Science.gov (United States)

Van Woerkom, Craig; Ferrucci, Steven

2005-05-01

Retinitis pigmentosa (RP) is one of the most common hereditary retinal dystrophies and causes of visual impairment affecting all age groups. The reported incidence varies, but is considered to be between 1 in 3,000 to 1 in 7,000. Sector retinitis pigmentosa is an atypical form of RP that is characterized by regionalized areas of bone spicule pigmentation, usually in the inferior quadrants of the retina. A 57-year-old Hispanic man with a history of previously diagnosed retinitis pigmentosa came to the clinic with a longstanding symptom of decreased vision at night. Bone spicule pigmentation was found in the nasal and inferior quadrants in each eye. He demonstrated superior and temporal visual-field loss corresponding to the areas of the affected retina. Clinical measurements of visual-field loss, best-corrected visual acuity, and ophthalmoscopic appearance have remained stable during the five years the patient has been followed. Sector retinitis pigmentosa is an atypical form of RP that is characterized by bilateral pigmentary retinopathy, usually isolated to the inferior quadrants. The remainder of the retina appears clinically normal, although studies have found functional abnormalities in these areas as well. Sector RP is generally considered a stationary to slowly progressive disease, with subnormal electro-retinogram findings and visual-field defects corresponding to the involved retinal sectors. Management of RP is very difficult because there are no proven methods of treatment. Studies have shown 15,000 IU of vitamin A palmitate per day may slow the progression, though this result is controversial. Low vision rehabilitation, long wavelength pass filters, and pedigree counseling remain the mainstay of management.

Hidden-Sector Dynamics and the Supersymmetric Seesaw

CERN Document Server

Campbell, Bruce A; Maybury, David W

2008-01-01

In light of recent analyses that have shown that nontrivial hidden-sector dynamics in models of supersymmetry breaking can lead to a significant impact on the predicted low-energy supersymmetric spectrum, we extend these studies to consider hidden-sector effects in extensions of the MSSM to include a seesaw model for neutrino masses. A dynamical hidden sector in an interval of mass scales below the seesaw scale would yield renormalization-group running involving both the anomalous dimension from the hidden sector and the seesaw-extended MSSM renormalization group equations (RGEs). These effects interfere in general, altering the generational mixing of the sleptons, and allowing for a substantial change to the expected level of charged-lepton flavour violation in seesaw-extended MSSM models. These results provide further support for recent theoretical observations that knowledge of the hidden sector is required in order to make concrete low-energy predictions, if the hidden sector is strongly coupled. In parti...

[Harassment in the public sector].

Science.gov (United States)

Puech, Paloma; Pitcho, Benjamin

2013-01-01

The French Labour Code, which provides full protection against moral and sexual harassment, is not applicable to public sector workers. The public hospital is however not exempt from such behaviour, which could go unpunished. Public sector workers are therefore protected by the French General Civil Service Regulations and the penal code.

Sectoral energy demand data: Sources and Issues

International Nuclear Information System (INIS)

Ounali, A.

1991-01-01

This chapter of the publication is dealing with Sectoral Energy Demand Data giving details about the Sources and Issues. Some comments are presented on rural energy surveys. Guidelines for the Definition and Desegregation of Sectoral Energy Consumption is given and Data Necessary for Sectoral Energy Demand Analysis is discussed

Monetary Policy with Sectoral Linkages and Durable Goods

DEFF Research Database (Denmark)

Petrella, Ivan; Rossi, Raffaele; Santoro, Emiliano

We study the normative implications of a New Keynesian model featuring intersectoral trade of intermediate goods between two sectors that produce durables and non-durables. The interplay between durability and sectoral production linkages fundamentally alters the intersectoral stabilization trade....... Aggregating durable and non-durable inflation depending on the relative degrees of sectoral price stickiness may induce a severe bias. Input materials attenuate the response of sectoral inflations to movements in the real marginal costs, so that the effective slopes of the sectoral supply schedules...

Electricity sector prospective 2009-2024; Prospectiva del sector electrico 2009-2024

Energy Technology Data Exchange (ETDEWEB)

Irastorza Trejo, Veronica; Doniz Gonzalez; Virginia; Cue Aguilar; Gumersindo [Secretaria de Energia, Mexico, D.F. (Mexico)

2009-07-01

This prospective planning of the electricity sector is comprised of four chapters and covers the 2009-2024 planning horizon. The first chapter describes recent developments in the international market of electric energy, which analyzes trends in global consumption of electrical energy, global installed capacity by technology type and country, sources of primary and secondary energy used to generate electricity in several countries and regions, the projections of fuel consumption and the dynamic construction of new plants and infrastructure using technology that, in both advanced economies and in the emerging strategic trends represent in the context the global fight against climate change, among which the new technology and advanced nuclear reactor technologies applicable to the use of renewable sources like wind, solar, geothermal, mini hydro, and bioenergy, among others. The second chapter presents the structure of the legal and regulatory framework in the electricity sector and regulatory policy instruments applicable in Mexico and saved the state permits issued in the methods considered in the Public Service Law of Electricity. The third chapter analyzes the evolution of the national electricity market in recent years, considering the behavior of domestic electricity consumption, sales to the public service sector, the seasonal behavior of demand and pricing structure. In the fourth chapter presents the path planning of consumption and electricity demand at the national, sectoral and regional levels in order to identify the requirements of capacity and energy for the period 2009-2024. [Spanish] Esta prospectiva de planeacion del sector electrico se integra por cuatro capitulos y abarca el horizonte de planeacion 2009-2024. El primer capitulo describe la evolucion reciente del mercado internacional de la energia electrica, en el cual se analizan las tendencias en el consumo mundial de energia electrica, capacidad mundial instalada por tipo de tecnologia y paises

Sectoral approaches to improve regional carbon budgets

NARCIS (Netherlands)

Smith, P.; Nabuurs, G.J.; Janssens, I.A.; Reis, S.; Marland, G.; Soussana, J.F.; Christensen, T.R.; Heath, L.; Apps, M.; Alexeyev, V.; Fang, J.; Gattuso, J.P.; Guerschman, J.P.; Huang, Y.; Jobbagy, E.; Murdiyarso, D.; Ni, J.; Nobre, A.; Peng, C.; Walcroft, A.; Wang, S.Q.; Pan, Y.; Zhou, G.S.

2008-01-01

Humans utilise about 40% of the earth¿s net primary production (NPP) but the products of this NPP are often managed by different sectors, with timber and forest products managed by the forestry sector and food and fibre products from croplands and grasslands managed by the agricultural sector. Other

Cost allocation. Combined heat and power production

International Nuclear Information System (INIS)

Sidzikauskas, V.

2002-01-01

The benefits of Combined Heat and Power (CHP) generation are discussed. The include improvement in energy intensity of 1% by 2010, 85-90% efficiency versus 40-50% of condensation power and others. Share of CHP electricity production in ERRA countries is presented.Solutions for a development CHP cost allocation are considered. Conclusion are presented for CHP production cost allocation. (R.P.)

Forbedret SCM gennem koordineret lagerstyring

DEFF Research Database (Denmark)

Larsen, Christian; Thorstenson, Anders

2009-01-01

Effektiv lagerstyring er en vigtig del af god supply chain management (SCM). At opnå en sådan lagerstyring er imidlertid ikke en triviel opgave. Det kræver indsigt i virkemåden af flertrins (engelsk: multi-echelon, multi-level eller multi-stage) lagersystemer med usikker fremtidig efterspørgsel...

Directory of the French thermal solar sector

International Nuclear Information System (INIS)

Demangeon, Elsa; Simmonet, Raphael; Canals, Jonathan

2011-01-01

After an overview of what is at stake for the thermal solar sector in terms of employment and industrial development, a discussion of the huge energy and industrial potential of this sector, and the proposition of a road map for the development of this sector in France, this publication proposes a directory of actors of the different activity sectors: research and development, engineering, electric and electronic hardware manufacturing, thermal equipment manufacturing, fluid manufacturing, reflector manufacturing, thermodynamic machine manufacturer, structure component manufacturer, control-command system, energy storage, developers, and so on

Coopetition Segments in a Public-Sector Context

DEFF Research Database (Denmark)

Stentoft, Jan; Mikkelsen, Ole Stegmann; Ingstrup, Mads Bruun

2018-01-01

The concept of coopetition is well-known in a private-sector context, but it is greatly neglected in a public-sector context. In continuation of this, the article sets out to explore and further position coopetition in the public sector. This is achieved through a study of coopetition among seven...... municipalities located in a Danish business region named the Triangle Region. The article concludes by identifying and describing four public-sector coopetition segments, and by providing a segmentation model to categorize and discuss different coopetition initiatives. Furthermore, the model can help public...

Greenhouse Gas Emissions Trading for the Transport Sector

International Nuclear Information System (INIS)

Holmgren, Kristina; Belhaj, Mohammed; Gode, Jenny; Saernholm, Erik; Zetterberg, Lars; Aahman, Markus

2006-12-01

In this study we have analysed different options to apply emissions trading for greenhouse gas emissions to the transport sector. The main focus has been on the EU transport sector and the possibility to include it in the current EU ETS in the trading period beginning in 2013. The purpose was to study how different alternatives will affect different actors. Focus has been on three sub-sectors; road transport, aviation and shipping. The railway sector has only been treated on a general level. The study includes the following three parts: 1. An economic analysis of the consequences of greenhouse gas emissions trading for the transport sector including an analysis of how the total cost for reaching an emission target will be affected by an integrated emissions trading system for the transport sector and the industry (currently included sectors) compared to separate systems for the sectors, 2. An analysis of design possibilities for the different sub-sectors. Discussion of positive and negative aspects with different choices of design parameters, such as trading entity, covered greenhouse gases, allocation of emission allowances and monitoring systems, 3. Examination of the acceptance among different actors for different options of using greenhouse gas emissions trading in the transport sector. When setting up an emissions trading scheme there are a number of design parameters that have to be analysed in order to find an appropriate system, with limited administrative and transaction costs and as small distortions as possible to competitiveness

Sector-specific issues and reporting methodologies supporting the General Guidelines for the voluntary reporting of greenhouse gases under Section 1605(b) of the Energy Policy Act of 1992. Volume 2: Part 4, Transportation sector; Part 5, Forestry sector; Part 6, Agricultural sector

International Nuclear Information System (INIS)

1994-10-01

This volume, the second of two such volumes, contains sector-specific guidance in support of the General Guidelines for the voluntary reporting of greenhouse gas emissions and carbon sequestration. This voluntary reporting program was authorized by Congress in Section 1605(b) of the Energy Policy Act of 1992. The General Guidelines, bound separately from this volume, provide the overall rationale for the program, discuss in general how to analyze emissions and emission reduction/carbon sequestration projects, and address programmatic issues such as minimum reporting requirements, time parameters, international projects, confidentiality, and certification. Together, the General Guidelines and the guidance in these supporting documents will provide concepts and approaches needed to prepare the reporting forms. This second volume of sector-specific guidance covers the transportation sector, the forestry sector, and the agricultural sector

In vitro fermentation characteristics of novel fibers, coconut endosperm fiber and chicory pulp, using canine fecal inoculum.

Science.gov (United States)

de Godoy, M R C; Mitsuhashi, Y; Bauer, L L; Fahey, G C; Buff, P R; Swanson, K S

2015-01-01

The objective of this experiment was to determine the effects of in vitro fermentation of coconut endosperm fiber (CEF), chicory pulp (CHP), and selective blends of these substrates on SCFA production and changes in microbiota using canine fecal inocula. A total of 6 individual substrates, including short-chain fructooligosaccharide (scFOS; a well-established prebiotic source), pectin (PEC; used as a positive control), pelletized cellulose (PC; used as a negative control), beet pulp (BP; considered the gold standard fiber source in pet foods), CEF, and CHP, and 3 CEF:CHP blends (75:25% CEF:CHP [B1], 50:50% CEF:CHP [B2], and 25:75% CEF:CHP [B3]) were tested. Triplicate samples of each substrate were fermented for 0, 8, and 16 h after inoculation. A significant substrate × time interaction (P fiber substrates. Future research should investigate the effects of CEF, CHP, and their blends on gastrointestinal health and fecal quality in dogs.

Ex Post Regulation as the Method of Sectoral Regulation in Electricity Sector

Directory of Open Access Journals (Sweden)

Rafał Nagaj

2017-10-01

Full Text Available Aim/purpose - The aim of the article is to present the essence of ex post approach to sectoral regulation, to show the advantages and disadvantages of ex post regulation and to answer the question whether it is worth using in the electricity sector. Design/methodology/approach - For this purpose, a critical analysis of expert literature was made and an empirical analysis of countries that have applied ex post regulation in the electricity sector in the European Union. Two research methods were used: a case study and a comparison of changes in price and quality of services. The research period covered the period 2000-2016. Findings - It was found that ex post regulation reduces regulatory costs, does not adversely affect the quality of service and long-term rates, gives businesses the freedom of decision-making and the ability to react quickly to changes in the economy. The main disadvantages of ex post regulation are the tendency for companies to over-estimate bills for consumers, the difficulty of pursuing claims by consumers and the need to shift regulatory risk to consumers. Research implications/limitations - In the paper there was identified a research gap, i.e. the effects of ex post regulation in the electricity sector in European Union countries where such regulation was applied. Identifying the research gap will help us understand what are the advantages and disadvantages of ex post regulation and will create a model for when it is good moment to implement this in the economy. Besides identifying the research gap, further studies will be required over ex post regulation. Originality/value/contribution - The additional value of the paper is the study of ex post regulation, its essence and types. The article analyzed the effects of ex post regulation in the electricity sector and provided valuable insights into the potential risks associated with this approach to economic regulation.

Communication in third sector organisations

Directory of Open Access Journals (Sweden)

Patricia Durán-Bravo, M.A.

2010-01-01

Full Text Available Third sector organisations favour the social development due to their capacity to produce human and social capital in society (Putman, 2001. In order to achieve social welfare third sector organisations need to produce a positive change in the relations among individuals, groups and institutions in a society. The expectations about the third sector organisations’ transparency and capacity to tackle social problems are increasing worldwide. In Mexico, this problematic is more complex because there is a low level of professionalism, transparency, accountability and participation culture in the organized civil society (ITAM, 2010. The development of the organized civil society in Mexico will depend to a great extent on its capacity to communicate its values to society and achieve a cultural and social change. Therefore, the third sector organisations must adopt strategic initiatives to reinforce their credibility and reputation, because the public and private donors are increasingly more demanding in their criteria to grant resources to social projects; and because the Mexican society has a low participation level and faces increasingly more complex social problems.

Regulatory reform in Mexico's natural gas sector

International Nuclear Information System (INIS)

1996-01-01

In recent years Mexico has implemented remarkable structural changes in its economy. However, until recently its large and key energy sector was largely unreformed. This is now changing. In 1995 the Mexican Government introduced legislative changes permitting private sector involvement in natural gas storage, transportation and distribution. Subsequent directives set up a detailed regulatory framework. These developments offer considerable promise, not only for natural gas sector development but also for growth in the closely linked electricity sector. This study analyses the changes which have taken place and the rationale for the regulatory framework which has been established. The study also contains recommendations to assist the Government of Mexico in effectively implementing its natural gas sector reforms and in maximizing the benefits to be realised through the new regulatory framework. (author)

Opportunities for business and partnership : services sector

International Nuclear Information System (INIS)

Mendoza Fernandez, J.

1999-01-01

Mexico is one of the countries with the highest industrial growth in Latin America. This is due to its geographical location, its vast oil and gas reserves, its membership in NAFTA (North American Free Trade Agreement), and mainly because of its modern economic policies. Mexico is a country in which many opportunities for private investment in the energy sector exist. This paper discussed Bufete Industrial Construcciones' involvement and experiences in the fields of petroleum, electricity and natural gas. The goals to be achieved in the various areas of the energy sector for the 2000-2006 period were summarized for the electric sector, the natural gas sector and the oil and gas extraction sector. The 4 mega projects currently underway include the Cantarell, the Burgos, the Ku-Maloob Zaap and the Delta del Grijalva projects

Public Sector/Private Sector Interaction in Providing Information Services. Report to the NCLIS from the Public Sector/Private Sector Task Force.

Science.gov (United States)

National Commission on Libraries and Information Science, Washington, DC.

The results of a 2-year study on the interactions between government and private sector information activities are presented in terms of principles and guidelines for federal policy to support the development and use of information resources, products, and services, and to implement the principles. Discussions address sources of conflict between…

Croatian Energy Sector Reform - Results Achieved

International Nuclear Information System (INIS)

Nota, R.

2001-01-01

During the past ten years, the energy sector has passed through significant changes including fundamental market, economic, legislative and institutional aspects of sector operation. As the main goal of the Republic of Croatia is the integration into the European Union, the energy sector reform ought to be conducted in keeping with the present market development processes of the EU in such a way as to fulfil all safety criteria. In view of the above mentioned, the Croatian Parliament brought a number of laws during its session in July 2001 (''Official Gazette'' 68/01): 1. Energy Law 2. Energy Activities Regulation Law 3. Electricity Market Law 4. Gas Market Law 5. Oil and Oil Derivatives Market Law, which present the commencement of the energy sector reform (www.mingo.hr).(author)

Public versus private sector: Do workers’ behave differently?

Directory of Open Access Journals (Sweden)

Paulo Aguiar do Monte

2017-05-01

Full Text Available It has been widely assumed in the literature that public sector organization operates in a different way compared to private sector organization. This paper intends to contribute to develop further this issue by investigating whether the relationship between worker efforts differs significantly both in the public and in the private sector. By drawing on data from the Monthly Employment Survey (PME, Brazil 2003–2012, and proxies for worker effort (unpaid overtime work and absences, it was observed, initially, significant differences between worker’s profiles depending on the sector they are employed. In turn, the estimation results of the dynamic panel models confirm that the level of worker effort alters according to their switches from one sector to another in the labor market. Briefly, public sector workers do not tend to do unpaid overtime work comparable to those in private sector, and they are more likely to be absent at work.

Comparison of Technological Options for Distributed Generation-Combined Heat and Power in Rajasthan State of India

Directory of Open Access Journals (Sweden)

Ram Kumar Agrawal

2013-01-01

Full Text Available Distributed generation (DG of electricity is expected to become more important in the future electricity generation system. This paper reviews the different technological options available for DG. DG offers a number of potential benefits. The ability to use the waste heat from fuel-operated DG, known as combined heat and power (CHP, offers both reduced costs and significant reductions of CO2 emissions. The overall efficiency of DG-CHP system can approach 90 percent, a significant improvement over the 30 to 35 percent electric grid efficiency and 50 to 90 percent industrial boiler efficiency when separate production is used. The costs of generation of electricity from six key DG-CHP technologies; gas engines, diesel engines, biodiesel CI engines, microturbines, gas turbines, and fuel cells, are calculated. The cost of generation is dependent on the load factor and the discount rate. It is found that annualized life cycle cost (ALCC of the DG-CHP technologies is approximately half that of the DG technologies without CHP. Considering the ALCC of different DG-CHP technologies, the gas I.C. engine CHP is the most effective for most of the cases but biodiesel CI engine CHP seems to be a promising DG-CHP technology in near future for Rajasthan state due to renewable nature of the fuel.

Benin - Transport Sector Investment Program

OpenAIRE

Mohan, P.C.

2003-01-01

The objectives of this project (1997-2001) using $40 million of IDA funds were to: (i) safeguard the competitiveness of Benin's transport sector and of its transit corridor through open modal competition; (ii) improve government's capacity for planning, programming and managing transport sector investments; (iii) boost the allocation of resources to infrastructure maintenance; (iv) boost t...

U.S. DOE Intermountain Clean Energy Application Center

Energy Technology Data Exchange (ETDEWEB)

Case, Patti [Etc Group, LLC, Salt Lake City, UT (United States)

2013-09-30

The Intermountain Clean Energy Application Center helped promote, assist, and transform the market for combined heat and power (CHP), including waste heat to power and district energy with CHP, in the intermountain states of Arizona, Colorado, New Mexico, Utah, and Wyoming. We accomplished these objectives through a combination of the following methods, which proved in concert to be a technically and economically effective strategy: o Identifying and facilitating high-impact CHP projects o Helping industrial, commercial, institutional, federal, and other large energy users in evaluating the economic and technical viability of potential CHP systems o Disseminating essential information about CHP including benefits, technologies, applications, project development, project financing, electric and gas utility incentives, and state policies o Coordinating and collaborating on CHP advancement with regional stakeholders including electric utilities, gas utilities, state energy offices, municipal development and planning personnel, trade associations, industry groups, non-profits, energy users, and others Outcomes of the project included increased understanding of and deployment of efficient and well-designed CHP systems in the states of Arizona, Colorado, New Mexico, Utah, and Wyoming. Increased CHP deployment helps the United States to enhance energy efficiency, strengthen the competitiveness of American industries, promote economic growth, foster a robust and resilient energy infrastructure, reduce emissions of air pollutants and greenhouse gases, and increase the use of market-ready advanced technologies. Specific outcomes included direct assistance to energy-intensive industrial facilities and other businesses, workshops and CHP tours, communication materials, and state policy education, all contributing to implementation of CHP systems in the intermountain region.

Waste management. Sector 6

International Nuclear Information System (INIS)

1994-01-01

The waste management section of this report deals with two sectors: land disposal of solid waste and wastewater treatment. It provides background information on the type of emissions that contribute to the greenhouse gases from these two sectors, presents both sector current status in Lebanon, describes the methodology followed to estimate the corresponding emissions, and presents the results obtained regarding greenhouse emissions. The total methane emissions from solid waste disposal on land are 42.804 Gg approximately. There are no emissions from wastewater and industrial handling systems because, for the target year 1994, there was no treatment facilities in Lebanon. The wastewater (municipal, commercial and industrial) was directly discharged into the sea, rivers, ravines or septic tanks which indicate that methane or nitrous oxide emissions are significant if not nonexistent. Note that this situation will change in the future as treatment plants are being constructed around the country and are expected to come into operation by the year 2000

Private sector data for performance management.

Science.gov (United States)

2011-07-01

This report examines and analyzes technical and institutional issues associated with the use of private sector travel time and speed data for public sector performance management. The primary data needs for congestion performance measures are outline...

Combined heat and power's potential to meet New York City's sustainability goals

International Nuclear Information System (INIS)

Howard, Bianca; Saba, Alexis; Gerrard, Michael; Modi, Vijay

2014-01-01

Combined Heat and Power (CHP) has been proven as a mature technology that can benefit both building owners and utility operators. As the economic and environmental benefits of CHP in urban centers gain recognition, regulations and policies have evolved to encourage their deployment. However, the question remains whether these policies are sufficient in helping to achieve the larger sustainability goals, such as the New York City-specific goal of incorporating 800 MW of distributed generation. In this paper, the current regulatory and policy environment for CHP is discussed. Then, an engineering analysis estimating the potential for CHP in NYC at the individual building and microgrid scale, considered a city block, is performed. This analysis indicates that over 800 MW of individual building CHP systems would qualify for the current incentives but many systems would need to undergo more cumbersome air permitting processes reducing the viable capacity to 360 MW. In addition microgrid CHP systems with multiple owners could contribute to meeting the goal even after considering air permits; however, these systems may incorporate many residential customers. The regulatory framework for microgrids with multiple owners and especially residential customers is particularly uncertain therefore additional policies would be needed to facilitate their development. - Highlights: • Estimates 1580 MW and 3042 MW CHP capacity at the building and microgrid scales. • Citywide emissions could reduce 4% at the building and 9% at the microgrid scale. • CHP microgrid systems operate at similar efficiencies while providing energy to buildings not viable for CHP. • Current regulatory and policy mechanisms would affect at least 800 MW of CHP systems. • Microgrid CHP systems may be necessary to the City's meet distributed generation goals

Calcineurin B homologous protein 3 negatively regulates cardiomyocyte hypertrophy via inhibition of glycogen synthase kinase 3 phosphorylation.

Science.gov (United States)

Kobayashi, Soushi; Nakamura, Tomoe Y; Wakabayashi, Shigeo

2015-07-01

Cardiac hypertrophy is a leading cause of serious heart diseases. Although many signaling molecules are involved in hypertrophy, the functions of some proteins in this process are still unknown. Calcineurin B homologous protein 3 (CHP3)/tescalcin is an EF-hand Ca(2+)-binding protein that is abundantly expressed in the heart; however, the function of CHP3 is unclear. Here, we aimed to identify the cardiac functions of CHP3. CHP3 was expressed in hearts at a wide range of developmental stages and was specifically detected in neonatal rat ventricular myocytes (NRVMs) but not in cardiac fibroblasts in culture. Moreover, knockdown of CHP3 expression using adenoviral-based RNA interference in NRVMs resulted in enlargement of cardiomyocyte size, concomitant with increased expression of a pathological hypertrophy marker ANP. This same treatment elevated glycogen synthase kinase (GSK3α/β) phosphorylation, which is known to inhibit GSK3 function. In contrast, CHP3 overexpression blocked the insulin-induced phosphorylation of GSK3α/β without affecting the phosphorylation of Akt, which is an upstream kinase of GSK3α/β, in HEK293 cells, and it inhibited both IGF-1-induced phosphorylation of GSK3β and cardiomyocyte hypertrophy in NRVMs. Co-immunoprecipitation experiments revealed that GSK3β interacted with CHP3. However, a Ca(2+)-binding-defective mutation of CHP3 (CHP3-D123A) also interacted with GSK3β and had the same inhibitory effect on GSK3α/β phosphorylation, suggesting that the action of CHP3 was independent of Ca(2+). These findings suggest that CHP3 functions as a novel negative regulator of cardiomyocyte hypertrophy via inhibition of GSK3α/β phosphorylation and subsequent enzymatic activation of GSK3α/β. Copyright © 2015 Elsevier Ltd. All rights reserved.

Optimization of Combine Heat and Power Plants in the Russian Wholesale Power Market Conditions

Directory of Open Access Journals (Sweden)

I. A. Chuchueva

2015-01-01

Full Text Available The paper concerns the relevant problem to optimize the combine heat and power (CHP plants in the Russian wholesale power market conditions. Since 1975 the CHP plants specialists faced the problem of fuel rate or fuel cost reduction while ensuring the fixed level of heat and power production. The optimality criterion was the fuel rate or fuel cost which has to be minimized. Produced heat and power was paid by known tariff. Since the power market started in 2006 the power payment scheme has essentially changed: produced power is paid by market price. In such condition a new optimality criterion the paper offers is a profit which has to be maximized for the given time horizon. Depending on the optimization horizon the paper suggests four types of the problem urgency, namely: long-term, mid-term, short-term, and operative optimization. It clearly shows that the previous problem of fuel cost minimization is a special case of profit maximization problem. To bring the problem to the mixed-integer linear programming problem a new linear characteristic curves of steam and gas turbine are introduced. Error of linearization is 0.6%. The formal statement of the problem of short-term CHP plants optimization in the market conditions is offered. The problem was solved with IRM software (OpenLinkInternational for seven power plants of JSC “Quadra”: Dyagilevskaya CHP, Kurskaya CHP-1, Lipetskaya CHP-2, Orlovskaya CHP, Kurskaya CHP NWR, Tambovskaya CHP, and Smolenskaya CHP-2.The conducted computational experiment showed that a potential profit is between 1.7% and 4.7% of the fuel cost of different CHP plants and depends on the power plant operation conditions. The potential profit value is 2–3 times higher than analogous estimations, which were obtained solving fuel cost minimization problem. The perspectives of the work are formalization of mid-term and long-term CHP plants optimization problem and development of domestic software for the new problem

Textile sector:a study of the effects of the commercial openingon the Brazilian textile sector

Directory of Open Access Journals (Sweden)

Simone Vilela Marquezini

2007-12-01

Full Text Available The process of commercial opening occurred in 1990 during the Collor’s govern­ment made the transformation industry get into a restructuring process. The ob­jective of this paper is to present the effects of the commercial opening of the textile sector during the period of 1993-2004 and main strategies adopted for the enterprises. The study was based on interview of the executives and institutions related to the textile sector. After ten years, the commercial opening is considered positive to the improvement of the productive structure of the sector. Besides the reduction on tariffs and the devaluation of the exchange rate in 1999, was pointed of the responsible factors of the adjusting process.

Perfil logístico de colombia sector automotriz

OpenAIRE

Gómez Bayter, Jose Manuel; Moreno Serrato, Daniel Felipe

2015-01-01

Mediante este proyecto se caracteriza la situación actual del sector automotriz en Colombia a través de las oportunidades y amenazas que presenta hoy en día el sector a partir de la situación económica mundial y la importancia del sector automotriz para el mundo y otros sectores de la economía dadas sus condiciones de arrastre debido al impacto de la globalización y la celebración de nuevos tratados de libre comercia para el país. Se identifica la importancia del sector debido a su relaci...

Composite Dark Sectors

International Nuclear Information System (INIS)

Carmona, Adrian

2015-06-01

We introduce a new paradigm in Composite Dark Sectors, where the full Standard Model (including the Higgs boson) is extended with a strongly-interacting composite sector with global symmetry group G spontaneously broken to H is contained in G. We show that, under well-motivated conditions, the lightest neutral pseudo Nambu-Goldstone bosons are natural dark matter candidates for they are protected by a parity symmetry not even broken in the electroweak phase. These models are characterized by only two free parameters, namely the typical coupling g D and the scale f D of the composite sector, and are therefore very predictive. We consider in detail two minimal scenarios, SU(3)/[SU(2) x U(1)] and [SU(2) 2 x U(1)]/[SU(2) x U(1)], which provide a dynamical realization of the Inert Doublet and Triplet models, respectively. We show that the radiatively-induced potential can be computed in a five-dimensional description with modified boundary conditions with respect to Composite Higgs models. Finally, the dark matter candidates are shown to be compatible, in a large region of the parameter space, with current bounds from dark matter searches as well as electroweak and collider constraints on new resonances.

Thermal Energy Corporation Combined Heat and Power Project

Energy Technology Data Exchange (ETDEWEB)

Turner, E. Bruce [Thermal Energy Corporation, Houston, TX (United States); Brown, Tim [Thermal Energy Corporation, Houston, TX (United States); Mardiat, Ed [Burns and McDonnell Engineering Company, Inc., Kansas City, MI (United States)

2011-12-31

outages. TECO's operation is the largest Chilled Water District Energy System in the United States. The company used DOE's funding to help install a new high efficiency CHP system consisting of a Combustion Turbine and a Heat Recovery Steam Generator. This CHP installation was just part of a larger project undertaken by TECO to ensure that it can continue to meet TMC's growing needs. The complete efficiency overhaul that TECO undertook supported more than 1,000 direct and indirect jobs in manufacturing, engineering, and construction, with approximately 400 of those being jobs directly associated with construction of the combined heat and power plant. This showcase industrial scale CHP project, serving a critical component of the nation's healthcare infrastructure, directly and immediately supported the energy efficiency and job creation goals established by ARRA and DOE. It also provided an unsurpassed model of a district energy CHP application that can be replicated within other energy intensive applications in the industrial, institutional and commercial sectors.

Transformation of the Polish Banking Sector

Directory of Open Access Journals (Sweden)

Marek Stefański

2009-07-01

Full Text Available In the post-war period the banking system in Poland underwent two important system transitions: after 1946 and after 1989. The third transformation began after May 1, 2004, but it did not have a systemic character. The Polish banking sector started to operate on the Single European Market. The first part of the paper is devoted to the problems of the banks transformations after 1989 with a special focus on the quantitative development of banks in 19892008, and on subsequent privatisation and consolidation processes. The former intensified in 19891999, and the latter in 19992002. The consolidation process was very noticeable in the sector of cooperative banks after 1994. The second part of the paper includes an economic and financial analysis of the banks. A lot of attention was paid to the liquidity of the banking sector. It was assessed as good, which was confirmed by a short-term rating of Moodys and by the Financial Stability Report 2009, published by the National Bank of Poland in June 2009. The comparison of the net profit of the banking sector in 19972008 shows its dependence on the economic situation and policy. The number of banks with capital adequacy ratio well above the minimum required by the banking supervision is rising. The financial power ratings are not favorable for the domestic banks. The third part of the paper focuses on the development directions of the Polish banking sector. It may be concluded on the basis of the analysis that privatisation and consolidation processes will be continued. They will concentrate on the capital of foreign banks already operating in Poland. As compared with individual foreign banks, the potential of the Polish banking sector is week. The fourth part of the paper focuses on the presentation Polish banking sector in the context of European Union banking sector. The paper finishes with conclusions. Generally, Polish banks have to implement a strategy to enable them to compete on the Single