Factors Affecting the Productivity of Government Workers

Directory of Open Access Journals (Sweden)

Jerry P. Haenisch

2012-01-01

Full Text Available While there have been a variety of studies concerning government worker motivation and productivity, few, if any, studies have focused specifically on state government workers’ perceptions about what factors affect their productivity. With more than 5 million workers employed by state governments in the United States, any improvement in state workplace productivity could have significant financial and service impact for society. In this study, state government workers identified those factors perceived as most affecting their workplace productivity. Data were collected through a survey offered to state government workers in the state of Wyoming. Factor analysis was used to derive key productivity factors from survey responses. The results indicate that state government workers appreciate having freedom and autonomy, like their jobs and the sense of achievement, and welcome teamwork, but feel limited by poor supervision and management, poor communications, and insufficient budgets and staffing. To improve productivity, the workers would eliminate bureaucracy, supervise better, and improve communication.

Preparation of three-dimensionally ordered macroporous polycysteine film and application in sensitive detection of 4-chlorophenol

International Nuclear Information System (INIS)

Zhang, Shenghui; Shi, Zhen; Wang, Jinshou; Cheng, Qin; Wu, Kangbing

2014-01-01

Highlights: • Polycysteine film with three-dimensionally ordered porous structures was prepared. • 3-DOM polycysteine film exhibited large active area and signal enhancement effects. • 3-DOM polycysteine film increased oxidation signal of 4-chlorophenol by 5-fold. - Abstract: Polystyrene microspheres with diameter of 350 nm were prepared, and then used to arrange on the surface of glassy carbon electrode (GCE) as structure-directing template. By successive cyclic sweeps between −1.0 V and 2.0 V in pH 7 phosphate buffer containing 10 mM cysteine, polycysteine film was electrodeposited on polystyrene microspheres-arranged GCE. After removing polystyrene template, a three-dimensionally ordered macroporous (3-DOM) polycysteine film was achieved, as confirmed by scanning electron microscopy measurements. Electrochemical responses of K 3 [Fe(CN) 6 ] probe indicated that 3-DOM polycysteine film-modified GCE exhibited larger active area, compared with GCE, polycysteine film-modified GCE and electrochemically oxidized GCE. The application of 3-DOM polycysteine film in electrochemical detection of 4-chlorophenol was studied. Due to ordered porous structures, the 3-DOM polycysteine film-modified GCE displayed signal enhancement effects, and enhanced the oxidation peak currents of 4-chlorophenol. As a result, a sensitive electrochemical method was developed for the detection of 4-chlorophenol, and the detection limit was 1.67 × 10 −8 M. This new method was used to detect 4-chlorophenol in water samples, and the value of recovery was over the range from 99.6% to 107%

Removal of 4-Chlorophenol from Aqueous Solutions Using Graphene Oxide Nanoporous Adsorbent

Directory of Open Access Journals (Sweden)

akbar eslami

2015-03-01

Full Text Available In this study, graphene oxide was used as a nanostructured adsorbent with properties supposedly better than other common adsorbents to remove 4-chlorophenol from aqueous solutions. For this purpose, graphene oxide was initially synthesized using the Hummer's method and x-ray diffraction and scanning electron microscopy were employed to identify its morphology and structure. The variables involved in the absorption process (including 4-chlorophenol initial concentration, adsorbent dosage, and pH were investigated based on the one-factor-at-a-time method. Eventually, the data were confirmed against the Langmuir and Freundlich isotherms. It was found that the adsorption process reached equilibrium in 20 minutes. A dosage of 0.4 g/L graphene oxide at pH=8 brought about 90% removal of 10 mg/L 4-chlorophenol within 5 minutes. The adsorption isotherm was described well by the Langmuir isotherm model and the values for R2 and RL were recorded as 0.99 for and 0.34, respectively. Being a low cost and highly efficient process, the adsorption process using graphene oxide adsorbent may be recommended for the reduction and elimination of pollutants in the environment, especially those in aqueous solutions.

Development of a robust chromatographic method for the detection of chlorophenols in cork oak forest soils.

Science.gov (United States)

McLellan, Iain; Hursthouse, Andrew; Morrison, Calum; Varela, Adélia; Pereira, Cristina Silva

2014-02-01

A major concern for the cork and wine industry is 'cork taint' which is associated with chloroanisoles, the microbial degradation metabolites of chlorophenols. The use of chlorophenolic compounds as pesticides within cork forests was prohibited in 1993 in the European Union (EU) following the introduction of industry guidance. However, cork produced outside the EU is still thought to be affected and simple, robust methods for chlorophenol analysis are required for wider environmental assessment by industry and local environmental regulators. Soil samples were collected from three common-use forests in Tunisia and from one privately owned forest in Sardinia, providing examples of varied management practice and degree of human intervention. These provided challenge samples for the optimisation of a HPLC-UV detection method. It produced recoveries consistently >75% against a soil CRM (ERM-CC008) for pentachlorophenol. The optimised method, with ultraviolet (diode array) detection is able to separate and quantify 16 different chlorophenols at field concentrations greater than the limits of detection ranging from 6.5 to 191.3 μg/kg (dry weight). Application to a range of field samples demonstrated the absence of widespread contamination in forest soils at sites sampled in Sardinia and Tunisia.

Removal of 4-chlorophenol from aqueous solution by granular activated carbon/nanoscale zero valent iron based on Response Surface Modeling

Directory of Open Access Journals (Sweden)

Majlesi Monireh

2017-12-01

Full Text Available The phenolic compounds are known as priority pollutants, even in low concentrations, as a result of their toxicity and non-biodegradability. For this reason, strict standards have been established for them. In addition, chlorophenols are placed in the 38th to 43th in highest priority order of toxic pollutants. As a consequence, contaminated water or wastewaters with phenolic compounds have to be treated before discharging into the receiving water. In this study, Response Surface Methodology (RSM has been used in order to optimize the effect of main operational variables responsible for the higher 4-chlorophenol removal by Activated Carbon-Supported Nanoscale Zero Valent Iron (AC/NZVI. A Box-Behnken factorial Design (BBD with three levels was applied to optimize the initial concentration, time, pH, and adsorbent dose. The characterization of adsorbents was conducted by using SEM-EDS and XRD analyses. Furthermore, the adsorption isotherm and kinetics of 4-chlorophenol on AC and AC/NZVI under various conditions were studied. The model anticipated 100% removal efficiency for AC/NZVI at the optimum concentration (5.48 mg 4-chlorophenol/L, pH (5.44, contact time (44.7 min and dose (0.65g/L. Analysis of the response surface quadratic model signified that the experiments are accurate and the model is highly significant. Moreover, the synthetic adsorbent is highly efficient in removing of 4-chlorophenol.

Productivity Strategies Ranking of Knowledge Workers | Najafi ...

African Journals Online (AJOL)

It is commonly recognized that knowledge is the only source of core competence in the knowledge based companies, but the productivity rate of Knowledge Workers is always Low. Based on Knowledge Workers' characteristics, in this paper, we seek to identify factors influencing the Productivity of Knowledge Workers, and ...

Ergonomics study for workers at food production industry

Directory of Open Access Journals (Sweden)

Mohd Fazi Hamizatun

2017-01-01

Full Text Available The health constraint faced by production workers affects the quality of the work. The productivity of the workers is affected by the Work-related Musculoskeletal Disorder (WMSD which limits the movement of the workers. The comfort workplace condition, known as ergonomic environment is important to prevent the occurrence of the WMSD. Proper ergonomic workplace considers the condition of the workers while doing the assigned work. The objectives of this study are to identify the current problems related to ergonomic in food production process, to analyse the actual production data by using Rapid Upper Limb Assessment (RULA and Rapid Entire Body Assessment (REBA and to recommend the ergonomic workplace environment based on the condition of the study. The study was done at a Small and Medium Enterprises (SME food production company in the Klang Valley of Malaysia. The condition of the workers affects the productivity of the company due to workers’ health deficiency. From the findings, the workers are exposed to the awkward postures which leads to the Work-Musculoskeletal Disorders (WMSDs. Besides, the best height of the worker at the study area (critical area to prevent the worker from WMSDs is within 155 cm to 160 cm. The results show that the workers are exposed to the WMSD in different level of risks which causes high absenteeism among the workers.

PENJERAPAN P-KHLOROFENOL DALAM AIR LIMBAH DENGAN ZEOLIT (Adsorption of p-Chlorophenol from Wastewater using Zeolite

Directory of Open Access Journals (Sweden)

Sarto Sarto

2007-07-01

Full Text Available ABSTRAK Penelitian ini bertujuan untuk mempelajari kemampuan zeolit untuk menjerap p-khlorofenol dari limbah cair secara batch, pada suhu 30 °C dan tekanan 1 atmosfer. Hasil penelitian menunjukkan bahwa proses penjerapan mengikuti persamaan Freundlich dan bersifat reversibel sebagian. Nisbah kinerja desorbsi dan penjerapan adalah antara 31,85 % dan 49,36 %. Kemampuan zeolit untuk menjerap p-khlorofenol meningkat dengan semakin rendahnya pH. pada nilai pH 3,92, berat zeolit 30 g, dan konsentrasi awal p-khlorofenol 97,302 mg/L. Adapun jumlah p-khlorofenol yang terjerap adalah sebesar 8,319 mg/L.   ABSTRACT The aim of this research is to study the characteristics of zeolit to adsorb p-chlorophenol from wastewater in a batch reactor at 30 oC and atmospheric conditions. The experimental results show that the adsorbtion process is partially reversible and fits with Freundlich Equation. The ratio of  desorption and adsortion performance is between 31.85 % and 49.36 %.  The performance of zeolit to adsorb p-chlorophenol increases with decreasing pH. At  pH about 3.92, using 30 g zeolit and 97.302 mg  p-chlorophenol/L. The concentration of adsorbed p-chlorophenol is about 8.319 mg/L.

Sorption of chlorophenols from aqueous solution by granular activated carbon, filter coal, pine and hardwood.

Science.gov (United States)

Hossain, G S M; McLaughlan, R G

2012-09-01

Wood and coal, as low-cost sorbents, have been evaluated as an alternative to commercial granular activated carbon (GAC) for chlorophenol removal. Kinetic experiments indicated that filter coal had a significantly lower rate of uptake (approximately 10% of final uptake was achieved after three hours) than the other sorbents, owing to intra-particle diffusion limitations. The data fitted a pseudo-second-order model. Sorption capacity data showed that GAC had a high sorption capacity (294-467 mg g(-1)) compared with other sorbents (3.2-7.5 mg(g-1)). However, wood and coal had a greater sorption capacity per unit surface area than GAC. Sorption equilibrium data was best predicted using a Freundlich adsorption model. The sorption capacity for all sorbents was 2-chlorophenol coal than the other sorbents. The results showed that pine, hardwood and filter coal can be used as sorbent materials for the removal of chlorophenol from water; however, kinetic considerations may limit the application of filter coal.

Removal of 4-chlorophenol from synthetic wastewater by the granulated graphene oxide nano particles

Directory of Open Access Journals (Sweden)

A Eslami

2016-09-01

Full Text Available Abstract Introduction: 4-chlorophenols one of the most common pollutants in wastewater is generated from the chemical and petrochemical industries. It is due to the presence of chloride and benzene ring is resistant to biodegradation. In this study, the use of granulated graphene oxide nano particles as an adsorbent nanostructure with better properties than other adsorbents for Removal of 4- chlorophenol from aqueous solution were investigated Methods: This research was implemented during the year 2013-2014 where the Granules of Graphene oxide nanoparticles were prepared using sodium silicate and X-ray diffraction techniques and electron microscope were used to identify the morphology and structure of the adsorbent of.  Parameters  affecting the adsorption process such as initial concentration of  4-chlorophenol(5,10,15,20,25,30mg/L, amount of adsorbent(20,40,60,80% by weight, contact time (3,5,10,20,30 min and pH(4,6,7,8,9 were investigated by changing one factor at a time. Finally, the data fitness with Langmuir and Freundlich isotherms were showed. Results: Adsorption process reached to equilibrium after 20 minutes. 2 g/L of graphene oxide granules at 3 minutes and 7 = pH could remove 5 mg/L 4-chlorophenol up to 58%. Freundlich isotherm have describing adsorption process and R2 =0.92. Conclusion: Absorbed process by the granules of Graphene oxide nanoparticles is low-cost high-efficiency and it could used to reduce and eliminate environmental pollutants particularly aqueous solutions.  

Information, Technology, and Information Worker Productivity

OpenAIRE

Aral, Sinan; Brynjolfsson, Erik; Van Alstyne, Marshall

2009-01-01

We econometrically evaluate information worker productivity at a midsize executive recruiting firm and assess whether the knowledge that workers accessed through their electronic communication networks enabled them to multitask more productively. We estimate dynamic panel data models of multitasking, knowledge networks, and productivity using several types of micro-level data: (a) direct observation of more than 125,000 email messages over a period of 10 months; (b) detailed accounting data o...

COMPARISON OF DIFFERENT ADVANCED OXIDATION PROCESSES DEGRADING P-CHLOROPHENOL IN AQUEOUS SOLUTION

Directory of Open Access Journals (Sweden)

H. Movahedyan ، A. M. Seid Mohammadi ، A. Assadi

2009-07-01

Full Text Available In present study, degradation of p-chlorophenol using several oxidation systems involving advanced oxidation processes such as ultraviolet/H2O2, microwave/H2O2 and both in the absence of hydrogen peroxide in batch mode by photolytic pilot plant and modified domestic microwave oven was evaluated. The oxidation rate was influenced by many factors, such as the pH value, the amount of hydrogen peroxide, irradiation time and microwave power. The optimum conditions obtained for the best degradation rate were pH=7 and H2O2 concentration of 0.05 mol/L for ultraviolet/H2O2 system and pH=10.5, H2O2 concentration of about 0.1 mol/L and microwave irradiation power of about 600W for microwave/H2O2 system at constant p-chlorophenol concentration. The degradation of p-chlorophenol by different types of oxidation processes followed first order rate decay kinetics. The rate constants were 0.137, 0.012, 0.02 and 0.004/min1 for ultraviolet/H2O2, microwave/H2O2, ultraviolet and microwave irradiation alone. Finally a comparison of the specific energy consumption showed that ultraviolet/H2O2 process reduced the energy consumption by at least 67% compared with the microwave/H2O2 process.

Respiratory risks in broiler production workers

Directory of Open Access Journals (Sweden)

M do CB de Alencar

2004-03-01

Full Text Available There are many situations that involve health risks to the Brazilian rural worker, and animal production is just one of them. Inhalation of organic dust, which has many microorganisms, leads in general to respiratory allergic reactions in some individuals, "asthma-like syndrome", and mucous membrane inflammation syndrome, that is a complex of nasal, eye, and throat complaints. Furthermore, workers might have farmer's hypersensitivity pneumonia, that is a respiratory health risk along the years. The objective of this study was to evaluate the potential pulmonary health risks in poultry production workers in the region of Curitiba, PR, Brazil. Interviews using a pre-elaborated questionnaire with 40 questions were made with 37 broiler production workers, which were submitted to a pulmonary function test. Results of restrictive function with lower FEV1 (the maximum respiratory potential, the forced expiratory volume in the first second of exhalation and FVC (forced vital capacity represented 24.32% of the total of workers, and severe obstruction represented 2.70%. Other symptoms were found in 67.57% of the workers as well. The results showed that those who work more than 4 years and within more than one poultry house, exceeding 5 hours per day of work, presented higher pulmonary health risks. It is concluded that the activities within broiler houses may induce allergic respiratory reaction in workers. The use of IPE (individual protection equipment besides special attention to the air quality inside the housing may be advised in a preventive way.

Productivity Gains from Worker Mobility and their Distribution between Workers and Firms

NARCIS (Netherlands)

A. Stoyanov (Andrey); N.V. Zubanov (Nick)

2012-01-01

textabstractUsing data from the universe of Danish manufacturing firms and workers over the period 1995-2007, we estimate output gains linked to productivity spillovers through worker mobility, and calculate the shares in these gains accrued to firms, to the workers who bring spillovers, and to the

The Photocatalytic Removal of Ortho Chlorophenol from Aqueous Solution Using Modified Fly Ash - Titanium Dioxide

Directory of Open Access Journals (Sweden)

Mohamad Malakootian

2016-05-01

Full Text Available The photocatalytic process is a useful method for the effective removal of phenolic compounds. Conducted in the spring‒summer 2013 at the Engineering Research Center for Environmental Health, Kerman University of Medical Sciences, this experimental study used a modified fly ash‒TiO2 mixture to enhance the photocatalytic removal efficiency of ortho-chlorophenol. Fly ash obatined from the Thermal Power Plant in Zarand, Kerman, was initially washed with sulfuric acid before being oxidized with potassium permanganate. The mixture of modified fly ash and TiO2 was then used for the removal of ortho-chlorophenol in the presence of UV light and the factors involved in the removal process were optimized. It was found that the ortho-chlorophenol removal efficiency recorded by the mixture of modified fly ash and TiO2 was higher than that by each of the modified fly ash or TiO2/UV alone. It was, further, observed that removal efficiency with a modified fly ash to TiO2 ratio of 3:1 rose to 98.8% under optimum conditions (i.e., pH: 2; contact time: 2 h; room temperature (29±2˚C, and a catalyst dose of 0.6 g. The ortho-chlorophenol removal efficiency in real wastewater from the Coal Wash Plant in Zarand was recorded at 88.4%. Based on the results obtained from simultaneous use of modified fly ash and TiO2, the proposed method may be recommended for industrial applications.

Demotivating factors influencing rubber production workers

Directory of Open Access Journals (Sweden)

Mohammad Reza Iravani

2012-01-01

Full Text Available Motivation is one of the most important factors influencing workers' productivity. An increase in workers' motivation could add more value to organizations' structure and influence the profitability, significantly. In this paper, we study different factors on demotivating workers using questionnaire consist of various questions. The questionnaire is distributed among some employees who work for rubber production units located in Esfahan, Iran. The results of this survey indicate that discrimination on annual job compensation, entrusting responsibilities and unpleasant relationship with family partner are some of the most important factors influencing employees' motivation. While financial factors play important role on increasing employees' motivation, non-financial factors are considered more important.

Usefulness of a PARAFAC decomposition in the fiber selection procedure to determine chlorophenols by means SPME-GC-MS.

Science.gov (United States)

Morales, Rocío; Cruz Ortiz, M; Sarabia, Luis A

2012-05-01

In this work, a procedure based on solid-phase microextraction and gas chromatography coupled with mass spectrometry is proposed to determine chlorophenols in water without derivatization. The following chlorophenols are studied: 2,4-dichlorophenol; 2,4,6-trichlorophenol; 2,3,4,6-tetrachlorophenol and pentachlorophenol. Three kinds of SPME fibers, polyacrylate, polydimethylsiloxane, and polydimethylsiloxane/divinylbenzene are compared to identify the most suitable one for the extraction process on the basis of two criteria: (a) to select the equilibrium time studying the kinetics of the extraction, and (b) to obtain the best values of the figures of merit. In both cases, a three-way PARAllel FACtor analysis decomposition is used. For the first step, the three-way experimental data are arranged as follows: if I extraction times are considered, the tensor of data, X, of dimensions I × J × K is generated by concatenating the I matrices formed by the abundances of the J m/z ions recorded in K elution times around the retention time for each chlorophenol. The second-order property of PARAFAC (or PARAFAC2) assesses the unequivocal identification of each chlorophenol, as consequence, the loadings in the first mode estimated by the PARAFAC decomposition are the kinetic profile. For the second step, a calibration based on a PARAFAC decomposition is used for each fiber. The best figures of merit were obtained with PDMS/DVB fiber. The values of decision limit, CCα, achieved are between 0.29 and 0.67 μg L(-1) for the four chlorophenols. The accuracy (trueness and precision) of the procedure was assessed. This procedure has been applied to river water samples.

The toxic effects of chlorophenols and associated mechanisms in fish

International Nuclear Information System (INIS)

Ge, Tingting; Han, Jiangyuan; Qi, Yongmei; Gu, Xueyan; Ma, Lin; Zhang, Chen; Naeem, Sajid; Huang, Dejun

2017-01-01

Highlights: • We review the toxic effects of chlorophenols (CPs) and underlying mechanisms in fish. • CPs induce lethal effects, oxidative stress, endocrine disruption, reproductive toxicity and apoptosis in fish. • CPs exhibit toxicity through multiple signaling pathways in fish and different pathways co-exist under the same conditions. • Studies on DNA methylation provide new insights into our understanding of epigenetic mechanisms of CPs-induced toxicity. • Mechanisms studies on CPs toxicity performed under environmental concentrations need more attentions. - Abstract: Chlorophenols (CPs) are ubiquitous contaminants in the environment primarily released from agricultural and industrial wastewater. These compounds are not readily degraded naturally, and easily accumulate in organs, tissues and cells via food chains, further leading to acute and chronic toxic effects on aquatic organisms. Herein, we review the available literature regarding CP toxicity in fish, with special emphasis on the potential toxic mechanisms. CPs cause oxidative stress via generation of reactive oxygen species, induction of lipid peroxidation and/or oxidative DNA damage along with inhibition of antioxidant systems. CPs affect immune system by altering the number of mature B cells and macrophages, while suppressing phagocytosis and down-regulating the expression of immune factors. CPs also disrupt endocrine function by affecting hormone levels, or inducing abnormal gene expression and interference with hormone receptors. CPs at relatively higher concentrations induce apoptosis via mitochondria-mediated pathway, cell death receptor-mediated pathway, and/or DNA damage-mediated pathway. CPs at relatively lower concentrations promote cell proliferation, and foster cancers-prone environment by increasing the rate of point mutations and oxidative DNA lesions. These toxic effects in fish are induced directly by CPs per se or indirectly by their metabolic products. In addition, recent

The toxic effects of chlorophenols and associated mechanisms in fish

Energy Technology Data Exchange (ETDEWEB)

Ge, Tingting; Han, Jiangyuan; Qi, Yongmei; Gu, Xueyan; Ma, Lin; Zhang, Chen; Naeem, Sajid; Huang, Dejun, E-mail: huangdj@lzu.edu.cn

2017-03-15

Highlights: • We review the toxic effects of chlorophenols (CPs) and underlying mechanisms in fish. • CPs induce lethal effects, oxidative stress, endocrine disruption, reproductive toxicity and apoptosis in fish. • CPs exhibit toxicity through multiple signaling pathways in fish and different pathways co-exist under the same conditions. • Studies on DNA methylation provide new insights into our understanding of epigenetic mechanisms of CPs-induced toxicity. • Mechanisms studies on CPs toxicity performed under environmental concentrations need more attentions. - Abstract: Chlorophenols (CPs) are ubiquitous contaminants in the environment primarily released from agricultural and industrial wastewater. These compounds are not readily degraded naturally, and easily accumulate in organs, tissues and cells via food chains, further leading to acute and chronic toxic effects on aquatic organisms. Herein, we review the available literature regarding CP toxicity in fish, with special emphasis on the potential toxic mechanisms. CPs cause oxidative stress via generation of reactive oxygen species, induction of lipid peroxidation and/or oxidative DNA damage along with inhibition of antioxidant systems. CPs affect immune system by altering the number of mature B cells and macrophages, while suppressing phagocytosis and down-regulating the expression of immune factors. CPs also disrupt endocrine function by affecting hormone levels, or inducing abnormal gene expression and interference with hormone receptors. CPs at relatively higher concentrations induce apoptosis via mitochondria-mediated pathway, cell death receptor-mediated pathway, and/or DNA damage-mediated pathway. CPs at relatively lower concentrations promote cell proliferation, and foster cancers-prone environment by increasing the rate of point mutations and oxidative DNA lesions. These toxic effects in fish are induced directly by CPs per se or indirectly by their metabolic products. In addition, recent

Adsorbed states of chlorophenol on Cu(110) and controlled switching of single-molecule junctions

Energy Technology Data Exchange (ETDEWEB)

Okuyama, H., E-mail: hokuyama@kuchem.kyoto-u.ac.jp; Kitaguchi, Y.; Hattori, T.; Ueda, Y.; Ferrer, N. G.; Hatta, S.; Aruga, T. [Department of Chemistry, Graduate School of Science, Kyoto University, Kyoto 606-8502 (Japan)

2016-06-28

A molecular junction of substituted benzene (chlorophenol) is fabricated and controlled by using a scanning tunneling microscope (STM). Prior to the junction formation, the bonding geometry of the molecule on the surface is characterized by STM and electron energy loss spectroscopy (EELS). EELS shows that the OH group of chlorophenol is dissociated on Cu(110) and that the molecule is bonded nearly flat to the surface via an O atom, with the Cl group intact. We demonstrate controlled contact of an STM tip to the “available” Cl group and lift-up of the molecule while it is anchored to the surface via an O atom. The asymmetric bonding motifs of the molecule to the electrodes allow for reversible control of the junction.

Productivity in Knowledge Worker Teams

OpenAIRE

Moreno Romero, Ana María; Mahou Fernández, Ángel; Varanki, H.

2013-01-01

The use of Information and Communication Technologies in work pro- cesses has not brought the expected productivity improvement. Some studies even suggest that the always-on model decreases productivity. This article proposes work teams as a new unit for knowledge worker productivity analysis in organizations. Organizations? ability to adopt new analysis measures is analyzed in three case studies.

Development and validation of a simple thin-layer chromatographic method for the analysis of p-chlorophenol in treated wastewater

Directory of Open Access Journals (Sweden)

Tešić Živoslav

2012-01-01

Full Text Available A thin-layer chromatographic method with densitometric detection was established for quantification of p-chlorophenol in waste water. Degradation efficiency of p-chlorophenol was monitored after each treatment of the wastewater samples. Degradation of p-chlorophenol was performed with advanced oxidation processes (AOPs, using UV, H2O2/UV, O3/H2O2/UV, O3 and O3/UV. Developed TLC procedure has been found to be simple, rapid and precise. The method was characterized by high sensitivity (limit of detection was 11 ng per band and limit of quantification 35 ng per band, linear range (from 75 to 500 ng per band, r = 0.9965, and high precision, accuracy (mean percentage recovery 98.6%, and specificity. Additionally, the efficiency of degradation was monitored using HPLC giving comparable results with RP TLC measurements. [Acknowledgement. This work was performed within the framework of the research project No. 172017 supported by the Ministry of Education and Science of Serbia.

Efficient photocatalytic reductive dechlorination of 4-chlorophenol to phenol on {0 0 1}/{1 0 1} facets co-exposed TiO_2 nanocrystals

International Nuclear Information System (INIS)

Jiang, Guodong; Wei, Meng; Yuan, Songdong; Chang, Qing

2016-01-01

Graphical abstract: - Highlights: • 4-Chlorophenol is dechlorinated over {0 0 1}/{1 0 1} co-exposed TiO_2 nanocrystals. • Photo-electrons are accumulated on {1 0 1} facets due to surface heterojunction. • Fluorine will trap photoelectrons to depress the dechlorination performance. • Sufficient isopropanol promotes the dechlorination activity and selectivity. - Abstract: 4-chlorophenol could be efficiently photoreductively dechlorinated over anatase TiO_2 nanocrystals with co-exposed {0 0 1} and {1 0 1} facets, which were synthesized and further characterized by scanning electron microscope (SEM), transmission electron microscope (TEM), X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS). Although fluorine could adsorb on {0 0 1} facets to decrease their surface energy, enabling TiO_2 to expose high energy {0 0 1} facets, the surface bonded fluorine might depress the photoreductive dechlorination efficiency of 4-chlorophenol, attributed to the electron trapping role of surface ≡Ti−F groups. Due to the formation of a surface heterojunction between {1 0 1} and {0 0 1} facets in a single TiO_2 nanocrystal, electrons and holes were spontaneously self-separated and selectively migrate to {1 0 1} and {0 0 1} facets, respectively. Electron trapping experiments demonstrated that photogenerated electrons are the responsible for the reductive dechlorinaton of 4-chlorophenol to phenol. To avoid the oxidative degradation of 4-chlorophenol by holes and ensure sufficient electrons to reductively dechlorinate the substrate, moderate scavengers were required in the reaction system and dissolved oxygen, which might deplete electron on TiO_2, also should be removed. With the optimal scavengers, the conversion efficiency of 4-chlorophenol (4-CP) achieved 97.5% and the selectivity for phenol was 92.5%, which were much higher than that of commercial TiO_2 P25.

Mathematical model for production of an industry focusing on worker status

Science.gov (United States)

Visalakshi, V.; kiran kumari, Sheshma

2018-04-01

Productivity improvement is posing a great challenge for industry everyday because of the difficulties in keeping track and priorising the variables that have significant impact on the productivity. The variation in production depends on the linguistic variables such as worker commitment, worker motivation and worker skills. Since the variables are linguistic we try to propose a model which gives an appropriate production of an industry. Fuzzy models aids the relationship between the factors and status. The model will support the industry to focus on the mentality of worker to increase the production.

Staff Training As Correlate Of Workers' Productivity In Selected ...

African Journals Online (AJOL)

Many studies have been carried out on the relationship between training and productivity of workers but none has been carried out on the correlation of training on the individual indices of productivity and workers productivity. It is against this background that this paper investigate the correlation of training on indices of ...

Workers dominate male production in the neotropical bumblebee Bombus wilmattae (Hymenoptera: Apidae

Directory of Open Access Journals (Sweden)

Vandame Rémy

2011-06-01

Full Text Available Abstract Background Cooperation and conflict in social insects are closely linked to the genetic structure of the colony. Kin selection theory predicts conflict over the production of males between the workers and the queen and between the workers themselves, depending on intra-colonial relatedness but also on other factors like colony efficiency, sex ratios, cost of worker reproduction and worker dominance behaviour. In most bumblebee (Bombus species the queen wins this conflict and often dominates male production. However, most studies in bumblebees have been conducted with only a few selected, mostly single mated species from temperate climate regions. Here we study the genetic colony composition of the facultative polyandrous neotropical bumblebee Bombus wilmattae, to assess the outcome of the queen-worker conflict over male production and to detect potential worker policing. Results A total of 120 males from five colonies were genotyped with up to nine microsatellite markers to infer their parentage. Four of the five colonies were queen right at point of time of male sampling, while one had an uncertain queen status. The workers clearly dominated production of males with an average of 84.9% +/- 14.3% of males being worker sons. In the two doubly mated colonies 62.5% and 96.7% of the male offspring originated from workers and both patrilines participated in male production. Inferring the mother genotypes from the male offspring, between four to eight workers participated in the production of males. Conclusions In this study we show that the workers clearly win the queen-worker conflict over male production in B. wilmattae, which sets them apart from the temperate bumblebee species studied so far. Workers clearly dominated male production in the singly as well the doubly mated colonies, with up to eight workers producing male offspring in a single colony. Moreover no monopolization of reproduction by single workers occurred.

Electro-oxidation of chlorophenols on poly(3,4-ethylenedioxythiophene)-poly(styrene sulphonate) composite electrode

International Nuclear Information System (INIS)

Pigani, L.; Musiani, M.; Pirvu, C.; Terzi, F.; Zanardi, C.; Seeber, R.

2007-01-01

The electrochemical behaviour of chlorinated phenols on Pt/poly(3,4-ethylenedioxy)thiophene,LiClO 4 and on Pt/poly(3,4-ethylenedioxy)thiophene,poly(sodium-4-styrenesulphonate) electrodes has been investigated in phosphate buffer solution. Poly(sodium-4-styrenesulphonate) exerts remarkable effect against the electrode fouling induced by oxidation of chlorophenols, allowing us to record the relevant anodic response even after repeated potential cycles. Hypotheses about the role exerted by poly(sodium 4-styrenesulphonate) are made, on the basis of evidences provided by several techniques, such as cyclic voltammetry, electrochemical impedance spectroscopy, electrochemical microgravimetry and atomic force microscopy. Thanks to the fact that different chlorophenols show differences in the voltammetric responses, depending on number and position of the chloro substituents on the aromatic ring, applications of the modified electrode in the analysis of mixtures of chlorinated phenols are possible

Formation of industrial mixed culture biofilm in chlorophenol cultivated medium of microbial fuel cell

Science.gov (United States)

Hassan, Huzairy; Jin, Bo; Dai, Sheng; Ngau, Cornelius

2016-11-01

The formation of microbial biofilm while maintaining the electricity output is a challenging topic in microbial fuel cell (MFC) studies. This MFC critical factor becomes more significant when handling with industrial wastewater which normally contains refractory and toxic compounds. This study explores the formation of industrial mixed culture biofilm in chlorophenol cultivated medium through observing and characterizing microscopically its establishment on MFC anode surface. The mixed culture was found to develop its biofilm on the anode surface in the chlorophenol environment and established its maturity and dispersal stages with concurrent electricity generation and phenolic degradation. The mixed culture biofilm engaged the electron transfer roles in MFC by generating current density of 1.4 mA/m2 and removing 53 % of 2,4-dichlorophenol. The results support further research especially on hazardous wastewater treatment using a benign and sustainable method.

Evaluation of toxicity and genotoxicity of 2-chlorophenol on bacteria, fish and human cells.

Science.gov (United States)

Vlastos, Dimitris; Antonopoulou, Maria; Konstantinou, Ioannis

2016-05-01

Due to the extensive use of chlorophenols (CPs) in anthropogenic activities, 2-Chlorophenol (2-CP), among other CPs, can enter aquatic ecosystems and can be harmful to a variety of organisms, including bacteria, fish and humans, that are exposed directly and/or indirectly to such contaminated environments. Based on the existing knowledge and in order to move a step forward, the purpose of this study is to investigate the toxic and mainly the genotoxic effects of 2-CP using a combination of bioassays. The tests include the marine bacterium Vibrio fischeri and micronuclei induction in the erythrocytes of Carassius auratus as well as in cultured human lymphocytes. The results obtained reveal that 2-CP is able to induce dose-dependent toxic and genotoxic effects on the selected tested concentrations under the specific experimental conditions. Copyright © 2016 Elsevier B.V. All rights reserved.

Fabrication of a novel hydrophobic/ion-exchange mixed-mode adsorbent for the dispersive solid-phase extraction of chlorophenols from environmental water samples.

Science.gov (United States)

Gao, Li; Wei, Yinmao

2016-08-01

A novel mixed-mode adsorbent was prepared by functionalizing silica with tris(2-aminoethyl)amine and 3-phenoxybenzaldehyde as the main mixed-mode scaffold due to the presence of the plentiful amino groups and benzene rings in their molecules. The adsorption mechanism was probed with acidic, natural and basic compounds, and the mixed hydrophobic and ion-exchange interactions were found to be responsible for the adsorption of analytes. The suitability of dispersive solid-phase extraction was demonstrated in the determination of chlorophenols in environmental water. Several parameters, including sample pH, desorption solvent, ionic strength, adsorbent dose, and extraction time were optimized. Under the optimal extraction conditions, the proposed dispersive solid-phase extraction coupled with high-performance liquid chromatography showed good linearity range and acceptable limits of detection (0.22∽0.54 ng/mL) for five chlorophenols. Notably, the higher extraction recoveries (88.7∽109.7%) for five chlorophenols were obtained with smaller adsorbent dose (10 mg) and shorter extraction time (15 min) compared with the reported methods. The proposed method might be potentially applied in the determination of trace chlorophenols in real water samples. © 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Relationship of stress and knowledge workers productivity in Mess-Sarcheshmeh Company

Directory of Open Access Journals (Sweden)

M. Jahanshahi

2010-04-01

Full Text Available Background and aims   the stress is creating from high density, complexity and long hours of work. Stress is higher among Knowledge workers because of the nature of knowledge work based on the complexity and high focus, aside from the Millennium Challenge is the productivity of   Knowledge workers. The aim of this study reviews the relationship between stress and productivity of Knowledge workers at the Mess-Sarcheshmeh company.     Methods   in this cross sectional study was studied 120 Knowledge workers of Mess-Sarcheshmeh Company. Data in this study were extracted through interviews and completing of performance measurement questionnaire, stress measurement questionnaire and Knowledge   workers productivity measurement questionnaire.     Results   The group of Computer Programming has highest productivity and job satisfaction,  and stress in this group is more desirable. Stress in the 95 percent confidence level and loyalty and job satisfaction in the 90 percent confidence level are associated with knowledge workers productivity. Job satisfaction has most effect on knowledge workers productivity.     Conclusion   The findings of this study indicate that not only stress has harmful effects suffering of people to emotional and physical diseases. But also, it affects on the productivity of managers and knowledge workers. Deal with it, which need for proper proactive planning in this area, who should participate in planning the annual interest adhered.  

Efficient photocatalytic reductive dechlorination of 4-chlorophenol to phenol on {0 0 1}/{1 0 1} facets co-exposed TiO{sub 2} nanocrystals

Energy Technology Data Exchange (ETDEWEB)

Jiang, Guodong; Wei, Meng; Yuan, Songdong [College of Chemistry and chemical engineering, Hubei Collaborative Innovation Center for High Efficient Utilization of Solar Energy, Hubei University of Technology, Wuhan 430068 (China); Chang, Qing, E-mail: changqinghust@163.com [Key Laboratory of Catalysis and Materials Science of the State Ethnic Affairs Commission and Ministry of Education, College of Resources and Environmental Science, South-Central University for Nationalities, Wuhan 430074 (China)

2016-01-30

Graphical abstract: - Highlights: • 4-Chlorophenol is dechlorinated over {0 0 1}/{1 0 1} co-exposed TiO{sub 2} nanocrystals. • Photo-electrons are accumulated on {1 0 1} facets due to surface heterojunction. • Fluorine will trap photoelectrons to depress the dechlorination performance. • Sufficient isopropanol promotes the dechlorination activity and selectivity. - Abstract: 4-chlorophenol could be efficiently photoreductively dechlorinated over anatase TiO{sub 2} nanocrystals with co-exposed {0 0 1} and {1 0 1} facets, which were synthesized and further characterized by scanning electron microscope (SEM), transmission electron microscope (TEM), X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS). Although fluorine could adsorb on {0 0 1} facets to decrease their surface energy, enabling TiO{sub 2} to expose high energy {0 0 1} facets, the surface bonded fluorine might depress the photoreductive dechlorination efficiency of 4-chlorophenol, attributed to the electron trapping role of surface ≡Ti−F groups. Due to the formation of a surface heterojunction between {1 0 1} and {0 0 1} facets in a single TiO{sub 2} nanocrystal, electrons and holes were spontaneously self-separated and selectively migrate to {1 0 1} and {0 0 1} facets, respectively. Electron trapping experiments demonstrated that photogenerated electrons are the responsible for the reductive dechlorinaton of 4-chlorophenol to phenol. To avoid the oxidative degradation of 4-chlorophenol by holes and ensure sufficient electrons to reductively dechlorinate the substrate, moderate scavengers were required in the reaction system and dissolved oxygen, which might deplete electron on TiO{sub 2}, also should be removed. With the optimal scavengers, the conversion efficiency of 4-chlorophenol (4-CP) achieved 97.5% and the selectivity for phenol was 92.5%, which were much higher than that of commercial TiO{sub 2} P25.

Increased and mistimed sex hormone production in night shift workers.

Science.gov (United States)

Papantoniou, Kyriaki; Pozo, Oscar J; Espinosa, Ana; Marcos, Josep; Castaño-Vinyals, Gemma; Basagaña, Xavier; Juanola Pagès, Elena; Mirabent, Joan; Martín, Jordi; Such Faro, Patricia; Gascó Aparici, Amparo; Middleton, Benita; Skene, Debra J; Kogevinas, Manolis

2015-05-01

Night shift work has been associated with an increased risk for breast and prostate cancer. The effect of circadian disruption on sex steroid production is a possible underlying mechanism, underinvestigated in humans. We have assessed daily rhythms of sex hormones and melatonin in night and day shift workers of both sexes. We recruited 75 night and 42 day workers, ages 22 to 64 years, in different working settings. Participants collected urine samples from all voids over 24 hours on a working day. Urinary concentrations of 16 sex steroid hormones and metabolites (estrogens, progestagens, and androgens) and 6-sulfatoxymelatonin were measured in all samples. Mean levels and peak time of total and individual metabolite production were compared between night and day workers. Night workers had higher levels of total progestagens [geometric mean ratio (GMR) 1.65; 95% confidence intervals (CI), 1.17-2.32] and androgens (GMR: 1.44; 95% CI, 1.03-2.00), compared with day workers, after adjusting for potential confounders. The increased sex hormone levels among night shift workers were not related to the observed suppression of 6-sulfatoxymelatonin. Peak time of androgens was significantly later among night workers, compared with day workers (testosterone: 12:14 hours; 10:06-14:48 vs. 08:35 hours; 06:52-10:46). We found increased levels of progestagens and androgens as well as delayed peak androgen production in night shift workers compared with day workers. The increase and mistiming of sex hormone production may explain part of the increased risk for hormone-related cancers observed in night shift workers. ©2015 American Association for Cancer Research.

COMBINED BIOLOGICAL-PHOTOCATALYTIC TREATMENT FOR THE MINERALIZATION OF A MIXTURE OF CHLOROPHENOLS IN AN ELECTROLYTE-CONTAINING MODEL WATER AND SPONTANEOUS SEDIMENTATION OF TITANIUM DIOXIDE

Directory of Open Access Journals (Sweden)

Dhanus Suryaman

2010-06-01

Full Text Available To shorten the biological treating time and to examine the effect of electrolytes in a model water on the photocatalytic treatment, the combined biological-photocatalytic treatment was evaluated for removal of a mixture (total: 100 mg L-1, each: 25 mg L-1 of 2-chlorophenol (2-CP, 2,4-dichlorophenol (2,4-DCP, 2,4,5-trichlorophenol (2,4,5-TCP, and pentachlorophenol (PCP in tap water. The mineralization of the four phenols was performed by a flow (biological treatment-circulative flow (photocatalytic treatment operation under black light and sunlight irradiations. After a large portion of biodegradable 2-CP and 2,4-DCP, and around half amount of slightly biodegradable 2,4,5-TCP were removed by the biological treatment, the remained three chlorophenols, biorecalcitrant PCP, and  biodegradation products were completely removed by the subsequent photocatalytic treatment. The combined treatment significantly shortened the degradation time only the biotreatment. High circulative flow rate (600 mL min-1 enabled for TiO2 particles to completely suspend in a tubular photoreactor and resulted in high removals of chlorophenols and TOC. Sunlight irradiation was successfully used and the saving of the electric energy of black light was possible. Since TiO2 particles in the tap water spontaneously sedimented on standing after the photocatalytic treatment, the combined system can be operated by integrating it with the TiO2 separation.   Keywords: photocatalysis, titanium dioxide, biodegradation, pollutant, wastewater

Determination of chlorophenols in landfill leachate using headspace sampling with ionic liquid-coated solid-phase microextraction fibers combined with gas chromatography–mass spectrometry

International Nuclear Information System (INIS)

Ho, Tse-Tsung; Chen, Chung-Yu; Li Zuguang; Yang, Thomas Ching-Cherng; Lee, Maw-Rong

2012-01-01

Highlights: ► Ionic liquid (IL), ([C 4 MIM][PF 6 ]), was rapid synthesized by microwave radiation. ► Trace chlorophenols in landfill leachate were extract by SPME coated IL. ► The IL-coated SPME-GC/MS method is low-cost, solvent-free and sensitive. - Abstract: A new microextraction technique based on ionic liquid solid-phase microextraction (IL-SPME) was developed for determination of trace chlorophenols (CPs) in landfill leachate. The synthesized ionic liquid, 1-butyl-3-methylimidazolium hexafluorophosphate ([C 4 MIM][PF 6 ]), was coated onto the spent fiber of SPME for extraction of trace CPs. After extraction, the absorbed analytes were desorbed and quantified using gas chromatography–mass spectrometry (GC/MS). The term of the proposed method is as ionic liquid-coated of solid-phase microextraction combined with gas chromatography–mass spectrometry (IL-SPME-GC/MS). No carryover effect was found, and every laboratory-made ionic liquids-coated-fiber could be used for extraction at least eighty times without degradation of efficiency. The chlorophenols studied were 2,4-dichlorophenol (2,4-DP), 2,4,6-trichlorophenol (2,4,6-TCP), 2,3,4,6-tetrachlorophenol (2,3,4,6-TeCP), and pentachlorophenol (PCP). The best results of chlorophenols analysis were obtained with landfill leachate at pH 2, headspace extraction for 4 min, and thermal desorption with the gas chromatograph injector at 240 °C for 4 min. Linearity was observed from 0.1 to 1000 μg L −1 with relative standard deviations (RSD) less than 7% and recoveries were over 87%. The limit of detection (LOD) for pentachlorophenol was 0.008 μg L −1 . The proposed method was tested by analyzing landfill leachate from a sewage farm. The concentrations of chlorophenols were detected to range from 1.1 to 1.4 μg L −1 . The results demonstrate that the IL-SPME-GC/MS method is highly effective in analyzing trace chlorophenols in landfill leachate.

Determination of chlorophenols in landfill leachate using headspace sampling with ionic liquid-coated solid-phase microextraction fibers combined with gas chromatography-mass spectrometry

Energy Technology Data Exchange (ETDEWEB)

Ho, Tse-Tsung; Chen, Chung-Yu [Department of Chemistry, National Chung Hsing University, Taichung 40227, Taiwan (China); Li Zuguang [Department of Chemistry, National Chung Hsing University, Taichung 40227, Taiwan (China); College of Chemical Engineering and Materials Science, Zhejiang University of Technology, Hangzhou 310014, Zhejiang (China); Yang, Thomas Ching-Cherng [Department of Chemistry, National Kaohsiung Normal University, Kaohsiung 82444, Taiwan (China); Lee, Maw-Rong, E-mail: mrlee@dragon.nchu.edu.tw [Department of Chemistry, National Chung Hsing University, Taichung 40227, Taiwan (China)

2012-01-27

Highlights: Black-Right-Pointing-Pointer Ionic liquid (IL), ([C{sub 4}MIM][PF{sub 6}]), was rapid synthesized by microwave radiation. Black-Right-Pointing-Pointer Trace chlorophenols in landfill leachate were extract by SPME coated IL. Black-Right-Pointing-Pointer The IL-coated SPME-GC/MS method is low-cost, solvent-free and sensitive. - Abstract: A new microextraction technique based on ionic liquid solid-phase microextraction (IL-SPME) was developed for determination of trace chlorophenols (CPs) in landfill leachate. The synthesized ionic liquid, 1-butyl-3-methylimidazolium hexafluorophosphate ([C{sub 4}MIM][PF{sub 6}]), was coated onto the spent fiber of SPME for extraction of trace CPs. After extraction, the absorbed analytes were desorbed and quantified using gas chromatography-mass spectrometry (GC/MS). The term of the proposed method is as ionic liquid-coated of solid-phase microextraction combined with gas chromatography-mass spectrometry (IL-SPME-GC/MS). No carryover effect was found, and every laboratory-made ionic liquids-coated-fiber could be used for extraction at least eighty times without degradation of efficiency. The chlorophenols studied were 2,4-dichlorophenol (2,4-DP), 2,4,6-trichlorophenol (2,4,6-TCP), 2,3,4,6-tetrachlorophenol (2,3,4,6-TeCP), and pentachlorophenol (PCP). The best results of chlorophenols analysis were obtained with landfill leachate at pH 2, headspace extraction for 4 min, and thermal desorption with the gas chromatograph injector at 240 Degree-Sign C for 4 min. Linearity was observed from 0.1 to 1000 {mu}g L{sup -1} with relative standard deviations (RSD) less than 7% and recoveries were over 87%. The limit of detection (LOD) for pentachlorophenol was 0.008 {mu}g L{sup -1}. The proposed method was tested by analyzing landfill leachate from a sewage farm. The concentrations of chlorophenols were detected to range from 1.1 to 1.4 {mu}g L{sup -1}. The results demonstrate that the IL-SPME-GC/MS method is highly effective in

Worker's perceptions of time, time-use-attitudes and productivity

OpenAIRE

E. Ben-Baruch; C. P. H. Myburgh; E. C. Anderssen

1991-01-01

Decreasing productivity and increasing wage demands are singled out as being crucial problems facing the economy of South Africa. Changes in the time perceptions and time-use-attitudes of workers could play a decisive role in increasing productivity. The relationships between time perception, needs, motivation and productivity are analysed. Culture, tradition, economy, and environment lend a specific significance to these variables. Workers in a technological society should be guided to adapt...

Bioconcentration of atrazine and chlorophenols into roots and shoots of rice seedlings

International Nuclear Information System (INIS)

Su Yuhong; Zhu Yongguan

2006-01-01

Accumulation of o-chlorophenol (CP), 2,4-dichlorophenol (DCP), and atrazine (ATR), as single and mixed contaminants, from hydroponic solutions into roots and shoots of rice seedlings was studied following 48-h exposure of the plant roots. As single contaminants at low levels, the observed bioconcentration factors (BCFs) of CP and DCP with roots approximated the equilibrium values according to the partition-limited model. The BCF of atrazine with roots was about half the partition limit for unknown reasons. The BCFs of CP and ATR with shoots also approximated the partition limits, while the BCF for more lipophilic DCP with shoots was about half the estimated limit, due to insufficient water transport into plants for DCP. As mixed contaminants at low levels, the BCFs with both roots and shoots were comparable with those for the single contaminants; at high levels, the BCFs generally decreased because of the enhanced mixed-contaminant phytotoxicity, as manifested by the greatly reduced plant transpiration rate. - Uptakes of o-chlorophenol, 2,4-dichlorophenol, and atrazine at various levels from nutrient solution by roots and shoots of rice seedlings were investigated using a partition-limited model

Aqueous hydrodechlorination of 4-chlorophenol over an Rh/reduced graphene oxide synthesized by a facile one-pot solvothermal process under mild conditions

International Nuclear Information System (INIS)

Ren, Yanlin; Fan, Guangyin; Wang, Chenyu

2014-01-01

Graphical abstract: The Rh nanoparticles/reduced graphene oxide (Rh NPs/RGO) nanocatalyst synthesized by a solvothermal technique showed high activity and stability for the hydrodechlorination of 4-chlorophenol under mild conditions. - Highlights: • Rh/RGO was synthesized through a one-pot polyol reduction of GO and RhCl 3 . • Complete HDC of 4-chlorophenol was obtained in aqueous phase without any additive. • The Rh/RGO exhibited an excellent catalytic performance for HDC reaction. - Abstract: Reduced graphene oxide (RGO) supported rhodium nanoparticles (Rh-NPs/RGO) was synthesized through one-pot polyol co-reduction of graphene oxide (GO) and rhodium chloride. The catalytic property of Rh-NPs/RGO was investigated for the aqueous phase hydrodechlorination (HDC) of 4-chlorophenol (4-CP). A complete conversion of 4-CP into high valued products of cyclohexanone (selectivity: 23.2%) and cyclohexanol (selectivity: 76.8%) was successfully achieved at 303 K and balloon hydrogen pressure in a short reaction time of 50 min when 1.5 g/L of 4-CP was introduced. By comparing with Rh-NPs deposited on the other supports, Rh-NPs/RGO delivered the highest initial rate (111.4 mmol/g Rh min) for 4-CP HDC reaction under the identical conditions. The substantial catalytic activity of Rh-NPs/RGO can be ascribed to the small and uniform particle size of Rh (average particle size was 1.7 ± 0.14 nm) on the surface of the RGO sheets and an electron-deficient state of Rh in the catalyst as a result of the strong interaction between the active sites and the surface function groups of RGO

Impact of schistosomiasis on quality of life and productivity of workers.

Science.gov (United States)

Kamel, M I; Moustafa, Y A; Foda, N; Khashab, S; Moemen, M; Abo el-Naga, R M

2002-01-01

The effect of schistosomiasis on quality of life (QOL) and productivity of workers was examined. In a textile factory in Alexandria, Egypt, personal, occupational and sociodemographic data were collected from 172 workers with schistosomiasis and 172 workers without schistosomiasis. Several indicators of productivity and the World Health Organization QOL brief were used to determine the impact of schistosomiasis. The disease affected the general, physical and independence, psychological and spiritual, and social domains of QOL. Although the productivity score of workers with schistosomiasis did not differ significantly from the control group, they had significantly lower additional hours of work and lower total incentives/month. A significant relationship was found between severity of schistosomiasis and QOL domains and productivity indicators.

Adsorption and bio-sorption of nickel ions and reuse for 2-chlorophenol catalytic ozonation oxidation degradation from water

International Nuclear Information System (INIS)

Ma, Wei; Zong, Panpan; Cheng, Zihong; Wang, Baodong; Sun, Qi

2014-01-01

Highlights: • Biomass and fly ash which were widespread for adsorption of heavy metal ions. • Preparation of catalyst by saturated adsorbents for 2-chlorophenol ozone degradation. • This work demonstrated that the O 3 /catalyst process was an effective pathway. • The use of nickel ions, fly ash and sawdust to achieve the recycling utilization of resources. -- Abstract: This work explored the preparation of an effective and low-cost catalyst and investigated its catalytic capacity for 2-chlorophenol ozonation oxidation degradation in wastewater by using an ozone oxidation batch reactor. The catalyst was directly prepared by the reuse of fly ash and sawdust after saturated adsorption of nickel ions from wastewater, which was proposed as an efficient and economic approach. The obtained catalyst was characterized by TGA, BET, FTIR, XRD, and SEM, the results showed that fly ash as the basic framework has high specific surface area and the addition of sawdust as the porogen agent could improve the pore structure of the catalyst. The adsorption of nickel ions by fly ash and sawdust from aqueous solution was also investigated in this study. The results obtained from the experiments indicated that adsorption of nickel ions by fly ash and biomass sawdust could be well described by Langmuir isotherm model and pseudo second order kinetic model. The catalytic performance of catalyst was studied in terms of the effect of time, liquid–solid ratio and pH on 2-chlorophenol ozonation degradation. It was found that the catalyst could effectively improve the ozonation reaction rate at pH = 7 with a 2:1 liquid–solid ratio. The kinetic study demonstrated that the reaction followed the first order model, and the rate constant increased 267% (0.03–0.1 min −1 ) of 2-chlorophenol ozonation degradation with 5 mmol/L concentration at pH = 7.0 compared with ozonation alone

Combined Effect of Temperature and Dissolved Oxygen on Degradation of 4-chlorophenol in Photo Microreactor

Czech Academy of Sciences Publication Activity Database

Vondráčková, Magdalena; Hejda, S.; Stavárek, Petr; Křišťál, Jiří; Klusoň, Petr

2015-01-01

Roč. 94, SI (2015), s. 35-38 ISSN 0255-2701 R&D Projects: GA ČR(CZ) GAP105/12/0664 Institutional support: RVO:67985858 Keywords : photo microreactor * phthalocyanine * chlorophenol oxidation Subject RIV: CI - Industrial Chemistry, Chemical Engineering Impact factor: 2.154, year: 2015

Elimination of 2-chlorophenol from aqueous solutions by marine algae: Evidences of the mechanism of adsorption

International Nuclear Information System (INIS)

Cuizano, N.A.; Llanos, B.P.

2009-01-01

The mechanism of the removal of 2-chlorophenol onto the marine algae Lessonia nigrescens Bory and Macrocystis integrifolia Bory from aqueous solutions was investigated in batch experiments. The effect of the presence of metallic ions in the adsorptive process was evaluated. The results show that lead slightly increases the adsorption of 2-chlorophenol. This suggests two different types of adsorption of both types of pollutants by the two marine algae and a possible synergic effect. Scanning electron microscopy and energy dispersive X-ray analyses predominantly indicated a surface adsorption. Finally, the change in Gibbs free energy (ΔG 0 ) of the process was determined. The results show that the adsorption is not spontaneous for none of the algae. This also corroborates the absence of electrostatic interactions and the existence of a polar interaction in an unfavorable environment surrounded by hydroxyl groups. (author)

Bioremediation of 2-chlorophenol containing wastewater by aerobic granules-kinetics and toxicity

Energy Technology Data Exchange (ETDEWEB)

Khan, Mohammad Zain [Environmental Research Laboratory, Department of chemistry, Aligarh Muslim University, Faculty of Science, Aligarh 202002, UP (India); Mondal, Pijush Kanti, E-mail: pijushamu@gmail.com [Environmental Research laboratory, Department of Applied Chemistry, Faculty of Engineering and Technology, Aligarh Muslim University, Aligarh 202002, UP (India); Sabir, Suhail, E-mail: sabirsuhail09@gmail.com [Environmental Research Laboratory, Department of chemistry, Aligarh Muslim University, Faculty of Science, Aligarh 202002, UP (India)

2011-06-15

Highlights: {yields} 2-Chlorophenol degrading aerobic granules were cultivated in sequencing batch reactor in presence of glucose and the organic loading rate (OLR) was increased from 6.9 to 9.7 kg COD m{sup -3} d{sup -1} during the experiment. {yields} Spectral studies confirmed that the biodegradation occurs via chlorocatechol pathway and modified ortho-cleavage. {yields} Biodegradation kinetics of 2-CP followed the Haldane model with kinetic parameters (R{sup 2} > 0.9) V{sub max} = 840 mg2-CP gMLVSS{sup -1} d{sup -1}, K{sub s} = 24.61 mg L{sup -1}, K{sub i} = 315.02 mg L{sup -1}. {yields} Genotoxic examination by plasmid nicking assay confirmed that the effluent was non-toxic. - Abstract: 2-Chlorophenol (2-CP) degrading aerobic granules were cultivated in a sequencing batch reactor (SBR) in presence of glucose. The organic loading rate (OLR) was increased from 6.9 to 9.7 kg COD m{sup -3} d{sup -1} (1150-1617 mg L{sup -1}COD per cycle) during the experiment. The alkalinity (1000 mg L{sup -1} as CaCO{sub 3}) was maintained throughout the experiment. The specific cell growth rate was found to be 0.013 d{sup -1}. A COD removal efficiency of 94% was achieved after steady state at 8 h HRT (hydraulic retention time). FTIR, UV, GC, GC/MS studies confirmed that the biodegradation of 2-CP occurs via chlorocatechol (modified ortho-cleavage) pathway. Biodegradation kinetics followed the Haldane model with kinetic parameters: V{sub max} = 840 mg2-CP gMLVSS{sup -1} d{sup -1}, K{sub s} = 24.61 mg L{sup -1}, K{sub i} = 315.02 mg L{sup -1}. Abiotic losses of 2-CP due to volatilization and photo degradation by sunlight were less than 3% and the results of genotoxicity showed that the degradation products are eco-friendly.

[Job satisfaction and its influential factors in oil production workers].

Science.gov (United States)

He, Ya-hui; Meng, Xian-hai; Yu, Shan-fa; Qi, Xiu-ying

2008-03-01

To investigate the job satisfaction and its influential factors in oil production workers. 423 oil production workers were investigated using the Occupational Stress Instrument. The job satisfaction, job organization satisfaction, job itself satisfaction in the workers aged or = 30 years old (49.34 +/- 10.12, 24.60 +/- 5.40, 24.74 +/- 5.36 respectively) (P job satisfaction in the groups of different service length was significantly different. The job satisfaction in the workers of service length 5-10 years was the lowest compared with those of service length 10 years (P job satisfaction. The relationship between psychological health, work locus of control, coping strategies, affective balance and social support showed a statistical significance difference (P job satisfaction as strain and personal characters, occupational stress factors, coping as independent variables. Five variables entered regression equation. They were work locus of control, affective balance, social support, psychological health and coping strategies. The job satisfaction of oil production workers is affected by multiple factors such as the age, work length and social support.

Solar efficiency of a new deposited titania photocatalyst. Chlorophenol, pesticide and dye removal applications

Energy Technology Data Exchange (ETDEWEB)

Guillard, Chantal; Disdier, Jean; Maldonado, Manuel I.; Herrmann, Jean-Marie [Laboratoire D' Application de la Chimie a l' Environnement LACE (UMR 5634), Universite Claude Bernard Lyon I, Bat Jules Raulin, 69622 Villeurbanne Cedex (France); Monnet, Christine; Dussaud, Joseph [AHLSTROM Research and Services, ZI de l' Abbaye, 38780 Pont-Eveque (France); Malato, Sixto; Blanco, Julian [Plataforma Solar de Almeria-CIEMAT, Ctra. Senes Km. 4, 04200 Tabernas, Almeria (Spain)

2003-11-10

A specially designed titania photocatalyst was prepared by coating Ahlstrom non-woven paper, used as a flexible photocatalytic support, with Millennium PC500 anatase. At the same time, a new solar photoreactor (STEP) was designed based on the multi-step cascade falling-film principle to ensure good exposure to sunlight and good oxygenation of the effluent to be treated. Several types of reactants were treated: 4-chlorophenol as a model organic pollutant; formetanate, a widely used pesticide in horticulture; a mixture of pesticides used in vineyards; and indigo carmine (IC) and Congo red (CR), which are complex multifunctional dye molecules. Each reaction was performed simultaneously in a solar CPC slurry photoreactor and in the STEP photoreactor under identical solar exposure to better evaluate and validate the results obtained. The STEP solar reactor was found to be as efficient as the CPC for 4-chlorophenol and formetanate total degradation. In contrast, both dyes required longer treatment in STEP experiments. This new system, in which the final tedious filtration can actually be avoided, constitutes a good alternative to slurries.

Comparison of different chlorophenols degradation in aqueous solutions by gamma irradiation under reducing conditions

International Nuclear Information System (INIS)

Peng, Yunxia; He, Shijun; Wang, Jianlong; Gong, Wenqi

2012-01-01

The reductive degradation of chlorophenols (CPs), including 2-CP, 4-CP and 2,4-DCP by gamma irradiation was investigated and compared. The results showed that the most efficient degradation took place with 2,4-DCP, followed by 2-CP and then 4-CP. This confirmed that the number and position of chlorine atoms existing in the benzene ring have significant impact on dechlorination and decomposition of CPs. The G-values of decomposition of CPs, the formation of intermediate products and chloride ion, and the degradation rate (K CPs and K Cl −1 ) were also determined. - Highlights: ► Reductive degradation of 2-CP, 4-CP and 2,4-DCP by γ radiation was compared. ► Number and position of chlorine affect their dechlorination and decomposition. ► G-values of CPs decomposition, intermediate formation and chloride release were determined.

Radiation-induced degradation of chlorophenols in aqueous solution

International Nuclear Information System (INIS)

Hu Jun; Wang Jianlong

2005-01-01

Radiation processing is a promising technology for applications in environmental protection, which includes wastewater treatment, micro-polluted drinking water treatment and the treatment of industrial wastewater containing various toxic and nonbiodegradable pollutants, municipal sewage and sludge disinfection, and flue gas desulfuration, etc. The paper reviews manly the recent progresses in radiolysis of chlorinated phenols in aqueous solution. Advantages and existing problems of the method in this particular application ar discussed. Mechanisms of radiation-induced degradation of chlorophenols, and the factors affecting the degradation efficiency, are discussed, too. It is concluded that combined approaches, such ozone oxidation and other methods, are of great help to the radiation processing application, in terms of lowering down the dose and increasing the efficient of pollutant removal. (authors)

Thermodynamic Study of Adsorption of Phenol, 4-Chlorophenol, and 4-Nitrophenol on Activated Carbon Obtained from Eucalyptus Seed

Directory of Open Access Journals (Sweden)

Nelson Giovanny Rincón-Silva

2015-01-01

Full Text Available Activated carbons from shell eucalyptus (Eucalyptus globulus were prepared by chemical activation through impregnation with solutions of two activators: sulfuric acid and sodium hydroxide, the surface areas for activated carbons with base were 780 and 670 m2 g−1 and the solids activated with acid were 150 and 80 m2 g−1. These were applying in adsorption of priority pollutants: phenol, 4-nitrophenol, and 4-chlorophenol from aqueous solution. Activated carbon with the highest adsorption capacity has values of 2.12, 2.57, and 3.89 on phenol, 4-nitrophenol, and 4-chlorophenol, respectively, and was activated with base. In general, all carbons adsorption capacity was given in the following order: 4-chlorophenol > 4-nitrophenol > phenol. Adsorption isotherms of phenols on activated carbons were fitted to the Langmuir, Freundlich, and Dubinin-Radusckevisch-Kanager models, finding great association between them and experimental data. A thermodynamic study was performed, the exothermic nature and spontaneous nature of the adsorption process were confirmed, and the favorability of adsorption on activated carbons with NaOH was confirmed by energy relations and concluded that the adsorption process of phenolic compounds from the activated carbon obtained is physical. The pH of solutions and pH at point of zero charge of the solid play an important role in the adsorption process.

Adsorption and bio-sorption of nickel ions and reuse for 2-chlorophenol catalytic ozonation oxidation degradation from water

Energy Technology Data Exchange (ETDEWEB)

Ma, Wei, E-mail: chmawv@yahoo.com [School of Chemical Engineering, Dalian University of Technology, Dalian 116024 (China); Zong, Panpan; Cheng, Zihong [School of Chemical Engineering, Dalian University of Technology, Dalian 116024 (China); Wang, Baodong; Sun, Qi [National Institute of Clean-and-low Carbon Energy, Beijing 102209 (China)

2014-02-15

Highlights: • Biomass and fly ash which were widespread for adsorption of heavy metal ions. • Preparation of catalyst by saturated adsorbents for 2-chlorophenol ozone degradation. • This work demonstrated that the O{sub 3}/catalyst process was an effective pathway. • The use of nickel ions, fly ash and sawdust to achieve the recycling utilization of resources. -- Abstract: This work explored the preparation of an effective and low-cost catalyst and investigated its catalytic capacity for 2-chlorophenol ozonation oxidation degradation in wastewater by using an ozone oxidation batch reactor. The catalyst was directly prepared by the reuse of fly ash and sawdust after saturated adsorption of nickel ions from wastewater, which was proposed as an efficient and economic approach. The obtained catalyst was characterized by TGA, BET, FTIR, XRD, and SEM, the results showed that fly ash as the basic framework has high specific surface area and the addition of sawdust as the porogen agent could improve the pore structure of the catalyst. The adsorption of nickel ions by fly ash and sawdust from aqueous solution was also investigated in this study. The results obtained from the experiments indicated that adsorption of nickel ions by fly ash and biomass sawdust could be well described by Langmuir isotherm model and pseudo second order kinetic model. The catalytic performance of catalyst was studied in terms of the effect of time, liquid–solid ratio and pH on 2-chlorophenol ozonation degradation. It was found that the catalyst could effectively improve the ozonation reaction rate at pH = 7 with a 2:1 liquid–solid ratio. The kinetic study demonstrated that the reaction followed the first order model, and the rate constant increased 267% (0.03–0.1 min{sup −1}) of 2-chlorophenol ozonation degradation with 5 mmol/L concentration at pH = 7.0 compared with ozonation alone.

CHLOROBENZENES, CHLOROPHENOLS, PHAS AND LOW CHLORINATED DIOXIN/FURAN POST-BOILER TOXICITY INDICATORS IN MUNICIPAL SOLID WASTE INCINERATORS

Science.gov (United States)

Research has sought indicator compounds for fast and less costly predictive monitoring of polychlorinated dibenzo-p-dioxin and furans, PCDD/F, toxic equivalent concentrations or TEQs. Studies have shown chlorobenzenes and chlorophenols had a good correlation with TEQ, suggesting ...

Experimental and DFT study of the degradation of 4-chlorophenol on hierarchical micro-/nanostructured oxide films

Czech Academy of Sciences Publication Activity Database

Guerin, V. M.; Žouželka, Radek; Bíbová-Lipšová, Hana; Jirkovský, Jaromír; Rathouský, Jiří; Pauporté, T.

2015-01-01

Roč. 168, JUN 01 (2015), s. 132-140 ISSN 0926-3373 R&D Projects: GA MK(CZ) DF11P01OVV012 Keywords : 4-Chlorophenol degradation * DFT modeling * ZnO hierarchical nanostructures Subject RIV: CF - Physical ; Theoretical Chemistry Impact factor: 8.328, year: 2015

Impact of work-induced stress on perceived workers' productivity in ...

African Journals Online (AJOL)

Impact of work-induced stress on perceived workers' productivity in banking ... The study investigated the relationship among work-induced stress, job performance, ... tend to reduce effects of work-related stress on workers' health and welfare.

Relationship of stress and knowledge workers productivity in Mess-Sarcheshmeh Company

OpenAIRE

M. Jahanshahi; A. Afrazeh; A. Najafi

2010-01-01

Background and aims   the stress is creating from high density, complexity and long hours of work. Stress is higher among Knowledge workers because of the nature of knowledge work based on the complexity and high focus, aside from the Millennium Challenge is the productivity of   Knowledge workers. The aim of this study reviews the relationship between stress and productivity of Knowledge workers at the Mess-Sarcheshmeh company.     Methods   in this cross sectional study was studied 120 Know...

Near vision correction and work productivity among textile workers

Directory of Open Access Journals (Sweden)

Kovin S. Naidoo

2016-11-01

Full Text Available Purpose: Uncorrected presbyopia (near vision impairment is prevalent in approximately 517 million people worldwide; this prevalence ranges from 30% to 80% in Africa. Good near vision is needed for a range of tasks; therefore, uncorrected presbyopia can negatively affect the quality of life of individuals, impact families and society, and potentially have negative implications on employment and labour work productivity. This study aimed to determine the impact of near vision correction on the work productivity of clothing factory workers. Methods: We conducted a cross-sectional study and sampled all workers who were aged 40 years and older and who performed near vision tasks (e.g. machinist, cutter, zip sewer, clothing pressers and quality controllers in seven clothing factories. We included workers who were employed for at least 3 months and whose uncorrected near visual acuity could be improved and corrected to better than 6/9 with spectacle correction. Workers were provided with near vision spectacles, and changes in their work productivity were evaluated after 6 months, using the factories’ output records as an indicator for measurement. Results: The final sample comprised 268 individuals, with 56% of African origin (n = 151 and 49% (n = 115 Indian origin. There were mainly females (94% in the sample, and the average age was 48 years (± 5.5 years, range 40–62 years. The overall post-correction mean production score (70.5 [SD ± 19.9] was significantly higher than the overall pre-correction mean production score (67.0 [SD ±20.3] (p < 0.001. The average change in production score was 3.5 (95% confidence interval [CI] 2.7–4.3, and the percent difference was 6.4% (95% CI 5.2–7.7. The increase in work productivity was significant for individuals of African (p < 0.001 and Indian origins (p < 0.001 but not for those of mixed race (p = 0.364; n = 2. Post-correction, the production scores of women increased significantly by 6.6% (95% CI 5.3�

Application of Azolla for 2-Chlorophenol and 4-Chrorophenol Removal from Aqueous Solutions

Directory of Open Access Journals (Sweden)

Mohammad Ali Zazouli

2013-09-01

Full Text Available Background and purpose: The 2-chlorophenol (2-CP and 4-chlorophenol (4-CP are phenolic compounds which may have adverse effects on human and environment. Therefore, removing these compounds from water and wastewater is necessary. This study aims to analyze 2-CP and 4-CP removal by using Azolla filiculoides biomass. Materials & Methods: Azolla biomass was sun dried, crushed and sieved to particle sizes ranging 1-2 mm. Then it was treated with 0.1M HCl for 5h followed by washing with distilled water and it was used as adsorbent. The residues concentration of 2-CP and 4-CP was measured by spectrophotometer in λmax of 274 and 280 nm, respectively. Results: The solute removed increases as contact time rises. The equilibrium time for 2-CP and 4-CP is 90 and 75, respectively. The removal efficiency of 4-CP is more than 2-CP. An increase in initial concentration of both compounds can lead to decrease of their removal efficiency. The optimum pH to remove both compounds is 5. The equilibrium data matched best on Freundlich isotherm and the adsorption kinetic model follows pseudo-second model. Conclusion: The results indicated that Azolla is an effective adsorbent for removing 2-CP and 4-CP from water and wastewater.

Rapid and effective decontamination of chlorophenol-contaminated soil by sorption into commercial polymers: concept demonstration and process modeling.

Science.gov (United States)

Tomei, M Concetta; Mosca Angelucci, Domenica; Ademollo, Nicoletta; Daugulis, Andrew J

2015-03-01

Solid phase extraction performed with commercial polymer beads to treat soil contaminated by chlorophenols (4-chlorophenol, 2,4-dichlorophenol and pentachlorophenol) as single compounds and in a mixture has been investigated in this study. Soil-water-polymer partition tests were conducted to determine the relative affinities of single compounds in soil-water and polymer-water pairs. Subsequent soil extraction tests were performed with Hytrel 8206, the polymer showing the highest affinity for the tested chlorophenols. Factors that were examined were polymer type, moisture content, and contamination level. Increased moisture content (up to 100%) improved the extraction efficiency for all three compounds. Extraction tests at this upper level of moisture content showed removal efficiencies ≥70% for all the compounds and their ternary mixture, for 24 h of contact time, which is in contrast to the weeks and months, normally required for conventional ex situ remediation processes. A dynamic model characterizing the rate and extent of decontamination was also formulated, calibrated and validated with the experimental data. The proposed model, based on the simplified approach of "lumped parameters" for the mass transfer coefficients, provided very good predictions of the experimental data for the absorptive removal of contaminants from soil at different individual solute levels. Parameters evaluated from calibration by fitting of single compound data, have been successfully applied to predict mixture data, with differences between experimental and predicted data in all cases being ≤3%. Copyright © 2014 Elsevier Ltd. All rights reserved.

Formulation and stabilization of an Arthrobacter strain with good storage stability and 4-chlorophenol-degradation activity for bioremediation

NARCIS (Netherlands)

Bjerketorp, Joakim; Röling, Wilfred F.M.; Feng, Xin Mei; Garcia, Armando Hernández; Heipieper, Hermann J.; Håkansson, Sebastian

Chlorophenols are widespread and of environmental concern due to their toxic and carcinogenic properties. Development of less costly and less technically challenging remediation methods are needed; therefore, we developed a formulation based on micronized vermiculite that, when air-dried, resulted

Chlorophenols Sorption on Multi-Walled Carbon Nanotubes: DFT Modeling and Structure-Property Relationship Analysis

OpenAIRE

Watkins, Marquita; Sizochenko, Natalia; Moore, Quentarius; Golebiowski, Marek; Leszczynska, Danuta; Leszczynski, Jerzy

2017-01-01

Presence of chlorophenols in drinking water could be hazardous to human health. Optimization and computational modeling of experimental conditions of adsorption lead to understanding the mechanisms of this process and to creating the efficient experimental equipment. In the current study, we investigated multi-walled carbon nanotubes by means of density functional theory (DFT) approach. This is applied to study selected types of interactions between six solvents, five types of nanotubes, and ...

A sensitive electrochemical chlorophenols sensor based on nanocomposite of ZnSe quantum dots and cetyltrimethylammonium bromide

International Nuclear Information System (INIS)

Li, Jianjun; Li, Xiao; Yang, Ran; Qu, Lingbo; Harrington, Peter de B.

2013-01-01

Graphical abstract: A very sensitive and simple electrochemical sensor for chlorophenols (CPs) based on nanocomposite of cetyltrimethylammonium bromide (CTAB) and ZnSe quantum dots (ZnSe–CTAB) through electrostatic self-assembly technology was built for the first time. The nanocomposite of ZnSe–CTAB introduced a favorable access for the electron transfer and showed excellent electrocatalytic activity for the oxidation of CPs. -- Highlights: •Nanocomposite based ZnSe QDs and CTAB was prepared and characterized. •A novel electrochemical sensor for the determination of CPs was built. •The proposed sensor was more sensitive, simple and environment-friendly. -- Abstract: In this work, a very sensitive and simple electrochemical sensor for chlorophenols (CPs) based on a nanocomposite of cetyltrimethylammonium bromide (CTAB) and ZnSe quantum dots (ZnSe–CTAB) through electrostatic self-assembly technology was built for the first time. The composite of ZnSe–CTAB introduced a favorable access for the electron transfer and gave superior electrocatalytic activity for the oxidation of CPs than ZnSe QDs and CTAB alone. Differential pulse voltammetry (DPV) was used for the quantitative determination of the CPs including 2-chlorophenol (2-CP), 2,4-dichlorophenol (2,4-DCP) and pentachlorophenol (PCP). Under the optimum conditions, the peak currents of the CPs were proportional to their concentrations in the range from 0.02 to 10.0 μM for 2-CP, 0.006 to 9.0 μM for 2,4-DCP, and 0.06 to 8.0 for PCP. The detection limits were 0.008 μM for 2-CP, 0.002 μM for 2,4-DCP, and 0.01 μM for PCP, respectively. The method was successfully applied for the determination of CPs in waste water with satisfactory recoveries. This ZnSe–CTAB electrode system provides operational access to design environment-friendly CPs sensors

[Features of the lipid exchange in workers employed in aluminium productions].

Science.gov (United States)

Kudaeva, I V; Dyakovich, O A; Masnavieva, L B; Popkova, O V; Abramatets, E A

Aluminum production can be referred to the category of industries of the increased health hazard for the workers. During technological process of receiving aluminum the air of a working zone is polluted by a large number of harmful substances. Workers are exposed to the complex of toxicants possessing a polytropic impact on the body. The most significant consequences are violations of different types of metabolism in the organism, including lipid metabolism. The purpose of the study is the investigation of the state of lipid metabolism in persons working in the production of aluminum. The object of research was 108 male workers of aluminum production suffering from occupational pathology of airways. The group of comparison was consisted of 103 men, apparently healthy, not exposed to toxicants. There was determined the content of the total cholesterol (TC), high and low density lipoprotein cholesterol (HDLC and LDLC), triglycerides (TG), phospholipids (PL), atherogenic index (AI). Statistical processing was performed with the use of software «Statistica 6.0». There were established statistically significant differences of indices of lipid exchange in the persons occupied in aluminum production when related to the group of comparison. IA values in persons from the study group proved to be higher than in the comparison group, due to elevated levels of TC and LDLC. The TG and PL level was also higher. The values of IA, TC and TG in workers of aluminum production in more than 50% cases exceeded the reference values. The average concentration of HDL cholesterol in both groups did not differ, and was above the lower reference boundary. Established features of lipid metabolism in workers of aluminum allow us to suggest the distinction in mechanisms of developing proatherogenic disorders from previously established ones for workers exposed to other chemicals. One of the causes of the shaping of these disorders can be oxidative stress, which in turn serves as a response to

The Pd-catalyzed hydrodechlorination of chlorophenols in aqueous solutions under mild conditions: A promising approach to practical use in wastewater

International Nuclear Information System (INIS)

Xia Chuanhai; Liu Ying; Zhou Shiwei; Yang Cuiyun; Liu Sujing; Xu Jie; Yu Junbao; Chen Jiping; Liang Xinmiao

2009-01-01

Catalytic hydrotreating of chlorophenols was carried out in water with Pd/C at 25 deg. C under atmospheric pressure. 1.0% (w/w) monocholophenols was completely dechlorinated within 60 min. Phenol, cyclohexanone and cyclohexanol were formed. In contrast to the dechlorination of monochlorophenols, the hydrogenation reaction of polychlorinated phenols became difficult and reaction rates were strongly dependent upon the number of the chlorine atoms. The solvent property had a considerably important influence on the dechlorination reaction. Water as a solvent showed more advantages than organic solvents. It was much easier to be hydrodechlorinated for chlorophenols in aqueous solutions. However, the presence of THF, dioxane, DMSO or DMF in water was disadvantageous to the reaction and easily to cause Pd/C deactivation. Additionally, when different halogenated organic compounds were present in aqueous solution, the dehalogenation reaction was the competitive hydrogenation process.

The Pd-catalyzed hydrodechlorination of chlorophenols in aqueous solutions under mild conditions: A promising approach to practical use in wastewater

Energy Technology Data Exchange (ETDEWEB)

Xia Chuanhai, E-mail: chuanhaixia@gmail.com [Yantai Institute of Coastal Zone Research for Sustainable Development, CAS, Yantai 264003 (China); Liu Ying; Zhou Shiwei; Yang Cuiyun; Liu Sujing [Yantai Institute of Coastal Zone Research for Sustainable Development, CAS, Yantai 264003 (China); Xu Jie [Dalian Institute of Chemical Physics, CAS, Dalian, 116021 (China); Yu Junbao [Yantai Institute of Coastal Zone Research for Sustainable Development, CAS, Yantai 264003 (China); Chen Jiping; Liang Xinmiao [Dalian Institute of Chemical Physics, CAS, Dalian, 116021 (China)

2009-09-30

Catalytic hydrotreating of chlorophenols was carried out in water with Pd/C at 25 deg. C under atmospheric pressure. 1.0% (w/w) monocholophenols was completely dechlorinated within 60 min. Phenol, cyclohexanone and cyclohexanol were formed. In contrast to the dechlorination of monochlorophenols, the hydrogenation reaction of polychlorinated phenols became difficult and reaction rates were strongly dependent upon the number of the chlorine atoms. The solvent property had a considerably important influence on the dechlorination reaction. Water as a solvent showed more advantages than organic solvents. It was much easier to be hydrodechlorinated for chlorophenols in aqueous solutions. However, the presence of THF, dioxane, DMSO or DMF in water was disadvantageous to the reaction and easily to cause Pd/C deactivation. Additionally, when different halogenated organic compounds were present in aqueous solution, the dehalogenation reaction was the competitive hydrogenation process.

CHLOROPHENOL DEGRADATION BY ELECTROCATALYSIS COMBINED WITH UV RADIATION%电催化与紫外光辐射降解氯酚

Institute of Scientific and Technical Information of China (English)

吴祖成; 叶倩; 周明华; 丛燕青

2002-01-01

@@ Chlorinated organic compounds, especially chlorophenols are well-known water priority pollutant family due to their toxicity and potential health hazard. As biological treatment processes for the degradation of chlorinated phenols have not been effective, various technologies and processes such as activated carbon adsorption[1], chemical oxidation[2], have been conventionally attempted for phenolic waster treatment. Recently, advanced oxidation processes (AOPs) have attracted a great deal of attention for treatment of phenolic wastewater, among these chemical oxidation ultraviolet (UV) oxidation system[3], anodic oxidation and indirect electro-oxidation have been widely studied[4]. Though a number of researchers worked on the degradation of chlorophenol by UV radiation or electrochemical processes, there are few reports on both methods for organic wastewater treatment. If these two processes can operate in harmony, the degradation efficiency would be enhanced.

Chlorophenol and alkylphenol concentrations in sediment and mussel tissues collected from selected locations in Kentucky Lake, USA

Energy Technology Data Exchange (ETDEWEB)

Loganathan, B.; Brown, B.; Owen, D. [Murray State Univ., Murray, KY (United States); Sajwan, K. [Savannah State Univ., Savannah, GA (United States)

2004-09-15

Kentucky (KY) Lake is one the major human-constructed lakes in the US. It serves as an ultimate repository of substances entering this watershed from portions of seven southeastern states, which include a sizeable fraction of the U.S. chemical processing, agricultural chemical products and electronics manufacturing industries. Although a few studies have examined the levels of chlorinated organics in the KY Lake and the lowermost Tennessee River, there have been no reports on the distribution on the levels of chlorophenols and alkylphenols in sediment and/or biological tissues from this region. In this study, sediment, and freshwater mussels were collected from selected locations in KY Lake and Lake Barkley and analyzed for CPs and APs. Furthermore, wood samples from abandoned docks, navigational towers and wood found in the lake bottom were also analyzed to examine the sources of CPs to the lakes.

Improving productivity and welfare among workers of small and household textile and garment units in India

Directory of Open Access Journals (Sweden)

Sanjay RODE

2009-06-01

Full Text Available Global Production System has changed remarkably over the period of time. In order to cope up with the change in the nature and type of production, the small and household garment and textile units are employing the younger and skilled labor force. The workers in these units are employed on the contract, causal and temporary basis. They are not given the different benefits as applicable to the large scale unit workers. Such workers are employed more hours and weekly holidays are not given to them. The small and household units are simply maximizing their interest and profit. Such capitalist nature of productive activities makes the labor worse. They are given less wages and classified as unskilled workers. Workers are not given proper training and security of work by these units. Their access to productive assets and standard of living is low as compare to the large unit’s workers. In order to improve the workers conditions, minimum wage should be given to all workers in small and household units. Such units must maintain their annual records of transactions. Small and household units must send their workers for compulsory training. Work place environment, minimum hours of work are required to regulate in these sectors. Immediate steps will have positive impact on workers earning and standard of living. It will help for further productivity enhancement.

Internal dosimetry from IPEN workers involved in the medical radioisotopes production

International Nuclear Information System (INIS)

Cesar, R.B.P.; Mesquita, C.H. de

1988-01-01

The internal dose from IPEN workers involved in the medical radioisotopes products is related. In the workers population, six groups were classified: development and research, routine production, quality control, package, radioprotection supervision and maintenance. The internal doses were calculated according to the methodology described by the ICRP-30, using resuls from a whole-body counter. The results described were obtained from 970 whole-body radioactivity measurements during the last three years (1985 a 1987). (author) [pt

Mediating production and consumption: cultural capital and 'cultural workers'.

Science.gov (United States)

Wright, David

2005-03-01

This paper examines recent debates about the role of what Bourdieu termed cultural intermediaries in the formation and reproduction of the relations of cultural capital. Workers in the cultural or creative industries were given a central place in Bourdieu's schema in the creation of hierarchies of value in the production and consumption of symbolic goods. Subsequent writers about the apparent emergence of a creative economy (Lash and Urry 1994; Featherstone 1991) have given workers involved in the production and distribution of cultural goods a pivotal place in the development of late or post-modernity. More recent work (Negus 2002; Nixon and du Gay 2002) has criticized the validity and coherence of the term as it has come to be understood and called for more rigour in its definition and use. This paper adds to this debate by considering the book trade as a space in which the gap between production and consumption of cultural goods is mediated. It suggests that cultural intermediaries, as cultural workers, are engaged in the reproduction of the cultural aspects of social class by 'shoring up' their insecure position in the relations of cultural capital, rather than simply being the taste leaders of a reflexive modernity.

Performance and Mechanism of Piezo-Catalytic Degradation of 4-Chlorophenol: Finding of Effective Piezo-Dechlorination.

Science.gov (United States)

Lan, Shenyu; Feng, Jinxi; Xiong, Ya; Tian, Shuanghong; Liu, Shengwei; Kong, Lingjun

2017-06-06

Piezo-catalysis was first used to degrade a nondye pollutant, 4-chlorophenol (4-CP). In this process, hydrothermally synthesized tetragonal BaTiO 3 nano/micrometer-sized particles were used as the piezo-catalyst, and the ultrasonic irradiation with low frequency was selected as the vibration energy to cause the deformation of tetragonal BaTiO 3 . It was found that the piezoelectric potential from the deformation could not only successfully degrade 4-chlorophenol but also effectively dechlorinate it at the same time, and five kinds of dechlorinated intermediates, hydroquinone, benzoquinone, phenol, cyclohexanone, and cyclohexanol, were determined. This is the first sample of piezo-dechlorination. Although various active species, including h + , e - , •H, •OH, •O 2 - , 1 O 2 , and H 2 O 2 , were generated in the piezoelectric process, it was confirmed by ESR, scavenger studies, and LC-MS that the degradation and dechlorination were mainly attributed to •OH radicals. These •OH radicals were chiefly derived from the electron reduction of O 2 , partly from the hole oxidation of H 2 O. These results indicated that the piezo-catalysis was an emerging and effective advanced oxidation technology for degradation and dechlorination of organic pollutants.

Are workers with a long commute less productive? An empirical analysis of absenteeism

NARCIS (Netherlands)

van Ommeren, J.N.; Gutierrez Puigarnau, E.

2011-01-01

We hypothesise, and test for, a negative effect of the length of the worker's commute on worker's productivity, by examining whether the commute has a positive effect on worker's absenteeism. We identify this effect using employer-induced changes in commuting distance. Our estimates for Germany

77 FR 33492 - Cequent Performance Products, Inc. a Subsidiary of Trimas Corporation Including Workers Whose...

Science.gov (United States)

2012-06-06

... Products, Inc. Including On-Site Leased Workers From Manpower Tekonsha, MI; Amended Certification Regarding... Cequent Performance Products, Inc. Accordingly, the Department is amending this certification to properly... Products, Inc. a Subsidiary of Trimas Corporation Including Workers Whose Wages Were Reported Under...

Commandants' Managerial Capacity and Workers Productivity in ...

African Journals Online (AJOL)

The purpose of this study is to evaluate the commandant's managerial capacity as if relates to workers productivity with a view to determining whether their calling to the education terrain has been justified and to correct certain areas in need of improvement in the Nigeria Police Education set up. In doing this, the study took ...

Microrespirometric determination of the effectiveness factor and biodegradation kinetics of aerobic granules degrading 4-chlorophenol as the sole carbon source

Energy Technology Data Exchange (ETDEWEB)

Vital-Jacome, Miguel [Department of Biotechnology and Bioengineering, Centro de Investigación y de Estudios Avanzados del Instituto Politécnico Nacional (Cinvestav-IPN), Av. IPN 2508, 07360 México DF, México (Mexico); Buitrón, Germán; Moreno-Andrade, Ivan; Garcia-Rea, Victor [Laboratory for Research on Advanced Process for Water Treatment, Unidad Académica Juriquilla, Instituto de Ingeniería, Universidad Nacional Autónoma de México, Blvd. Juriquilla 3001, Querétaro 76320, México (Mexico); Thalasso, Frederic, E-mail: thalasso@cinvestav.mx [Department of Biotechnology and Bioengineering, Centro de Investigación y de Estudios Avanzados del Instituto Politécnico Nacional (Cinvestav-IPN), Av. IPN 2508, 07360 México DF, México (Mexico)

2016-08-05

Highlights: • Microrespirometry was used to characterize aerobic granules. • Kinetic parameters for 4-chorophenol degradation were determined. • Intrinsic and apparent kinetic parameters were quantified and contrasted. • Aerobic granules presented lower μ{sub max} and higher K{sub S} than disaggregated granules. • Microrespirometry can be useful in model development and calibration. - Abstract: In this study, a microrespirometric method was used, i.e., pulse respirometry in microreactors, to characterize mass transfer and biodegradation kinetics in aerobic granules. The experimental model was an aerobic granular sludge in a sequencing batch reactor (SBR) degrading synthetic wastewater containing 4-chlorophenol as the sole carbon source. After 15 days of acclimation, the SBR process degraded 4-chlorophenol at a removal rate of up to 0.9 kg COD m{sup −3} d{sup −1}, and the degradation kinetics were well described by the Haldane model. The microrespirometric method consisted of injecting pulses of 4-chlorophenol into the 24 wells of a microreactor system containing the SBR samples. From the respirograms obtained, the following five kinetic parameters were successfully determined during reactor operation: (i) Maximum specific oxygen uptake rate, (ii) substrate affinity constant, (iii) substrate inhibition constant, (iv) maximum specific growth rate, and (v) cell growth yield. Microrespirometry tests using granules and disaggregated granules allowed for the determination of apparent and intrinsic parameters, which in turn enabled the determination of the effectiveness factor of the granular sludge. It was concluded that this new high-throughput method has the potential to elucidate the complex biological and physicochemical processes of aerobic granular biosystems.

Microrespirometric determination of the effectiveness factor and biodegradation kinetics of aerobic granules degrading 4-chlorophenol as the sole carbon source

International Nuclear Information System (INIS)

Vital-Jacome, Miguel; Buitrón, Germán; Moreno-Andrade, Ivan; Garcia-Rea, Victor; Thalasso, Frederic

2016-01-01

Highlights: • Microrespirometry was used to characterize aerobic granules. • Kinetic parameters for 4-chorophenol degradation were determined. • Intrinsic and apparent kinetic parameters were quantified and contrasted. • Aerobic granules presented lower μ_m_a_x and higher K_S than disaggregated granules. • Microrespirometry can be useful in model development and calibration. - Abstract: In this study, a microrespirometric method was used, i.e., pulse respirometry in microreactors, to characterize mass transfer and biodegradation kinetics in aerobic granules. The experimental model was an aerobic granular sludge in a sequencing batch reactor (SBR) degrading synthetic wastewater containing 4-chlorophenol as the sole carbon source. After 15 days of acclimation, the SBR process degraded 4-chlorophenol at a removal rate of up to 0.9 kg COD m"−"3 d"−"1, and the degradation kinetics were well described by the Haldane model. The microrespirometric method consisted of injecting pulses of 4-chlorophenol into the 24 wells of a microreactor system containing the SBR samples. From the respirograms obtained, the following five kinetic parameters were successfully determined during reactor operation: (i) Maximum specific oxygen uptake rate, (ii) substrate affinity constant, (iii) substrate inhibition constant, (iv) maximum specific growth rate, and (v) cell growth yield. Microrespirometry tests using granules and disaggregated granules allowed for the determination of apparent and intrinsic parameters, which in turn enabled the determination of the effectiveness factor of the granular sludge. It was concluded that this new high-throughput method has the potential to elucidate the complex biological and physicochemical processes of aerobic granular biosystems.

Do ergonomics improvements increase computer workers' productivity?: an intervention study in a call centre.

Science.gov (United States)

Smith, Michael J; Bayehi, Antoinette Derjani

2003-01-15

This paper examines whether improving physical ergonomics working conditions affects worker productivity in a call centre with computer-intensive work. A field study was conducted at a catalogue retail service organization to explore the impact of ergonomics improvements on worker production. There were three levels of ergonomics interventions, each adding incrementally to the previous one. The first level was ergonomics training for all computer users accompanied by workstation ergonomics analysis leading to specific customized adjustments to better fit each worker (Group C). The second level added specific workstation accessories to improve the worker fit if the ergonomics analysis indicated a need for them (Group B). The third level met Group B requirements plus an improved chair (Group A). Productivity data was gathered from 72 volunteer participants who received ergonomics improvements to their workstations and 370 control subjects working in the same departments. Daily company records of production outputs for each worker were taken before ergonomics intervention (baseline) and 12 months after ergonomics intervention. Productivity improvement from baseline to 12 months post-intervention was examined across all ergonomics conditions combined, and also compared to the control group. The findings showed that worker performance increased for 50% of the ergonomics improvement participants and decreased for 50%. Overall, there was a 4.87% output increase for the ergonomics improvement group as compared to a 3.46% output decrease for the control group. The level of productivity increase varied by the type of the ergonomics improvements with Group C showing the best improvement (9.43%). Even though the average production improved, caution must be used in interpreting the findings since the ergonomics interventions were not successful for one-half of the participants.

Experimental Evaluation Use of Semifluidized Bed Adsorber for the Treatment of P-chlorophenol and O-cresol in Wastewater using Activated Carbon as Adsorbent

Directory of Open Access Journals (Sweden)

Saad Hanash Ammar

2015-12-01

Full Text Available In the present work the performance of semifluidized bed adsorber was evaluated for removal of phenolic compound from wastewater using commercial activated carbon as adsorbent. P-chlorophenol (4-Chlorophenol and o-cresol (2-methylphenol was selected as a phenolic compound for that purpose. The phenols percent removal, in term of breakthrough curves were studied as affected by hydrodynamics limitations which include minimum and maximum semifluidization velocities and packed bed formation in the column by varying various parameters such as inlet liquid superficial velocity (from Uminsf to 8Uminsf m/s, and retaining grid (sometimes referred to as adsorbent loading to initial static bed height ratio (from 3-4.5. Inlet phenols concentration (50-400 mg/l and initial pH of the liquid solutions feed (from 4 to 10 were also studied. The experimental semifluidized adsorber unit was designed and constructed in Chem. Eng. labs at Al-Nahrain University (consisted of a QVF glass tube 2.54 cm inside diameter, and 70cm length. The results showed that the initial percent removal of phenolic compounds (P-chlorophenol and o-cresol decrease with increasing the superficial liquid velocity while the time required reaching equilibrium state decreased. Also it slightly affected with the increase in the retaining grid height and the time required to reach the equilibrium value decreased.

Cause-specific mortality in Finnish ferrochromium and stainless steel production workers.

Science.gov (United States)

Huvinen, M; Pukkala, E

2016-04-01

Although stainless steel has been produced for more than a hundred years, exposure-related mortality data for production workers are limited. To describe cause-specific mortality in Finnish ferrochromium and stainless steel workers. We studied Finnish stainless steel production chain workers employed between 1967 and 2004, from chromite mining to cold rolling of stainless steel, divided into sub-cohorts by production units with specific exposure patterns. We obtained causes of death for the years 1971-2012 from Statistics Finland. We calculated standardized mortality ratios (SMRs) as ratios of observed and expected numbers of deaths based on population mortality rates of the same region. Among 8088 workers studied, overall mortality was significantly decreased (SMR 0.77; 95% confidence interval [CI] 0.70-0.84), largely due to low mortality from diseases of the circulatory system (SMR 0.71; 95% CI 0.61-0.81). In chromite mine, stainless steel melting shop and metallurgical laboratory workers, the SMR for circulatory disease was below 0.4 (SMR 0.33; 95% CI 0.07-0.95, SMR 0.22; 95% CI 0.05-0.65 and SMR 0.16; 95% CI 0.00-0.90, respectively). Mortality from accidents (SMR 0.84; 95% CI 0.67-1.04) and suicides (SMR 0.72; 95% CI 0.56-0.91) was also lower than in the reference population. Working in the Finnish ferrochromium and stainless steel industry appears not to be associated with increased mortality. © The Author 2015. Published by Oxford University Press on behalf of the Society of Occupational Medicine.

Oxidative degradation of chlorophenol derivatives promoted by microwaves or power ultrasound: a mechanism investigation.

Science.gov (United States)

Cravotto, Giancarlo; Binello, Arianna; Di Carlo, Stefano; Orio, Laura; Wu, Zhi-Lin; Ondruschka, Bernd

2010-03-01

Phenols are the most common pollutants in industrial wastewaters (particularly from oil refineries, resin manufacture, and coal processing). In the last two decades, it has become common knowledge that they can be effectively destroyed by nonconventional techniques such as power ultrasound (US) and/or microwave (MW) irradiation. Both techniques may strongly promote advanced oxidation processes (AOPs). The present study aimed to shed light on the effect and mechanism of US- and MW-promoted oxidative degradation of chlorophenols; 2,4-dichlorophenoxyacetic acid (2,4-D), a pesticide widespread in the environment, was chosen as the model compound. 2,4-D degradation by AOPs was carried out either under US (20 and 300 kHz) in aqueous solutions (with and without the addition of Fenton reagent) or solvent-free under MW with sodium percarbonate (SPC). All these reactions were monitored by gas chromatography-mass spectrometry (GC-MS) analysis and compared with the classical Fenton reaction in water under magnetic stirring. The same set of treatments was also applied to 2,4-dichlorophenol (2,4-DCP) and phenol, the first two products that occur a step down in the degradation sequence. Fenton and Fenton-like reagents were employed at the lowest active concentration. The effects of US and MW irradiation were investigated and compared with those of conventional treatments. Detailed mechanisms of Fenton-type reactions were suggested for 2,4-D, 2,4-DCP, and phenol, underlining the principal degradation products identified. MW-promoted degradation under solvent-free conditions with solid Fenton-like reagents (viz. SPC) is extremely efficient and mainly follows pyrolytic pathways. Power US strongly accelerates the degradation of 2,4-D in water through a rapid generation of highly reactive radicals; it does not lead to the formation of more toxic dimers. We show that US and MW enhance the oxidative degradation of 2,4-D and that a considerable saving of oxidants and cutting down of

Worker health is good for the economy: union density and psychosocial safety climate as determinants of country differences in worker health and productivity in 31 European countries.

Science.gov (United States)

Dollard, Maureen F; Neser, Daniel Y

2013-09-01

Work stress is recognized globally as a social determinant of worker health. Therefore we explored whether work stress related factors explained national differences in health and productivity (gross domestic product (GDP)). We proposed a national worker health productivity model whereby macro market power factors (i.e. union density), influence national worker health and GDP via work psychosocial factors and income inequality. We combined five different data sets canvasing 31 wealthy European countries. Aggregated worker self-reported health accounted for 13 per cent of the variance in national life expectancy and in national gross domestic product (GDP). The most important factors explaining worker self-reported health and GDP between nations were two levels of labor protection, macro-level (union density), and organizational-level (psychosocial safety climate, PSC, i.e. the extent of management concern for worker psychological health). The majority of countries with the highest levels of union density and PSC (i.e., workplace protections) were Social Democratic in nature (i.e., Sweden, Finland, Denmark, Norway). Results support a type of society explanation that social and economic factors (e.g., welfare regimes, work related policies) in concert with political power agents at a national level explain in part national differences in workplace protection (PSC) that are important for worker health and productivity. Attention should be given across all countries, to national policies to improve worker health, by bolstering national and local democratic processes and representation to address and implement policies for psychosocial risk factors for work stress, bullying and violence. Results suggest worker health is good for the economy, and should be considered in national health and productivity accounting. Eroding unionism may not be good for worker health or the economy either. Copyright © 2013 Elsevier Ltd. All rights reserved.

Preparation and characterizations of CuO doped ZnO nano-structure for the photocatalytic degradation of 4-chlorophenol under visible light

Directory of Open Access Journals (Sweden)

Afsaneh Shokri

2016-12-01

Full Text Available In the present investigation, a ZnO nanostructure was synthesized by means of precipitation and sonochemical methods. The X-ray diffraction (XRD pattern indicated that the wurtzite structure of ZnO had a hexagonal symmetry and there was no impurity. The average ZnO particles crystallite size was calculated at about 41 nm. The SEM and TEM images revealed nanostructure ZnO particles with a cauliflower-like and rod morphology with dimensions of 85, 79 and 117 nm. In order to investigate the increment of ZnO photoactivity under visible light, the CuO doped ZnO nanostructures were fabricated by a wet impregnation method using copper oxide as the copper source and ZnO as the precursor. The XRD analysis confirmed that the CuO phase was present in the as-prepared sample and the average size of nano crystalline decreased to about 36 nm. The DRS spectra indicated the extended absorption of CuO-ZnO to the visible range as a result of band gap reduction to 2.9 eV (in comparison of 3.2 eV in ZnO. In order to investigate the photocatalytic activity of the synthesized photocatalyst, the degradation of 4-Chlorophenol under visible light was performed. Sixteen experiments using full factorial were executed by adjusting four parameters (amount of catalyst, initial concentration of 4-Chlorophenol, pH, and time of irradiation. An empirical expression was proposed and successfully used to model the photocatalytic process with a high correlation, and an optimal experimental region was also obtained. According to the developed model for degradation and the subsequent ANOVA test using Design Expert software, the time of irradiation with a 46.57% effect played the most important role in the photocatalytic activity, while the influences of parameters on each other were negligible. Optimal experimental conditions for 4-Chlorophenol concentration (0.01 g/L were found at an initial pH =8 and a catalyst loading of 0.07 g/L. The results indicated that CuO-ZnO can remove 95

IMPLICATIONS OF THE PROCESS OF PRODUCTION IN THE HEALTH OF WORKERS: SOME REFLECTIONS

Directory of Open Access Journals (Sweden)

Saulo Vasconcelos Rocha

2011-05-01

Full Text Available The work represents a conscious activity of human beings, fruit of the effort to transform the nature of products or services. The industrial revolution and how the relationship of work organization are modified resulting consequences on the health of the worker. The purpose of this paper is to present some reflections on the implications of the production process on the health of workers, addressing the discussion of management models of work. Based in analyzes of studies it was found that the methods of analysis of the work contributed to better understanding of the implications of the production process on the health of workers. All types of studies proposed found that working conditions can lead to wear biopsychic employees, becoming the main component illness.

Implications of the process of production in the health of workers: some reflections

Directory of Open Access Journals (Sweden)

Saulo Vasconcelos Rocha

2011-01-01

Full Text Available The work represents a conscious activity of human beings, fruit of the effort to transform the nature of products or services. The industrial revolution and how the relationship of work organization are modified resulting consequences on the health of the worker. The purpose of this paper is to present some reflections on the implications of the production process on the health of workers, addressing the discussion of management models of work. Based in analyzes of studies it was found that the methods of analysis of the work contributed to better understanding of the implications of the production process on the health of workers. All types of studies proposed found that working conditions can lead to wear biopsychic employees, becoming the main component illness.

Room-temperature Pd-catalyzed C-H chlorination by weak coordination: one-pot synthesis of 2-chlorophenols with excellent regioselectivity.

Science.gov (United States)

Sun, Xiuyun; Sun, Yonghui; Zhang, Chao; Rao, Yu

2014-02-07

A room-temperature Pd(II)-catalyzed regioselective chlorination reaction has been developed for a facile one-pot synthesis of a broad range of 2-chlorophenols. The reaction demonstrates an excellent regioselectivity and reactivity for C-H chlorination. This reaction represents one of the rare examples of mild C-H functionalization at ambient temperature.

Workers' Well-Being and Productivity: The Role of Bargaining.

Science.gov (United States)

Mayer, Jean

1983-01-01

Bargaining that makes available facilities for satisfaction of workers' basic needs can contribute to increased productivity, which in turn enhances competitiveness. Such bargaining can be an effective means of extending and reinforcing national economic planning. (SK)

Worker's perceptions of time, time-use-attitudes and productivity

Directory of Open Access Journals (Sweden)

E. Ben-Baruch

1991-06-01

Full Text Available Decreasing productivity and increasing wage demands are singled out as being crucial problems facing the economy of South Africa. Changes in the time perceptions and time-use-attitudes of workers could play a decisive role in increasing productivity. The relationships between time perception, needs, motivation and productivity are analysed. Culture, tradition, economy, and environment lend a specific significance to these variables. Workers in a technological society should be guided to adapt to and live by the value system needed to uphold productivity. Opsomming Voortdurende afnemende produktiwiteit teenoor looneise wat styg, is een van die kritieke probleme waarmee die Suid-Afrikaanse ekonomie gekonfronteer word. Die verandering van werkers se tydpersepsie en verandering van houdinge teenoor die benutting van tyd kan deurslaggewend in die verhoging van produktiwiteit wees. In die lig hiervan is die verwantskap tussen tydpersepsie, behoeftes, motivering en prodrktiwiteit ondersoek. In die ontleding word aandag geskenk aan die invloed wat kultuur, tradisie, ekonomie en die omgewing op hierdie veranderlikes het. Opieiding in 'n tegnologiese samelewmg behoort daarop gerig te wees om 'n waardesisteem by werkers te laat ontwikkel wat produktiwiteit kan bevorder.

Increased and Mistimed Sex Hormone Production in Night Shift Workers

OpenAIRE

Papantoniou, K; Pozo, OJ; Espinosa, A; Marcos, J; Castano-Vinyals, G; Basagana, X; Juanola Pages, E; Mirabent, J; Martin, J; Such Faro, P; Gasco Aparici, A; Middleton, B; Skene, DJ; Kogevinas, M

2015-01-01

BACKGROUND: Night shift work has been associated with an increased risk for breast and prostate cancer. The effect of circadian disruption on sex steroid production is a possible underlying mechanism, underinvestigated in humans. We have assessed daily rhythms of sex hormones and melatonin in night and day shift workers of both sexes. METHODS: We recruited 75 night and 42 day workers, ages 22 to 64 years, in different working settings. Participants collected urine samples from all voids over ...

Empowering production workers with digitally facilitated knowledge processes--a conceptual framework

DEFF Research Database (Denmark)

Hannola, Lea; Richter, Alexander; Richter, Shahper

2018-01-01

proposes a conceptual framework for empowering workers in industrial production environments with digitally facilitated knowledge management processes. The framework explores four concrete facets of digital advancements that apply to a wide range of knowledge processes and production strategies...

A New Approach to Measuring the Gap between Marginal Productivity and Wages of Workers

OpenAIRE

KODAMA Naomi; ODAKI Kazuhiko

2012-01-01

The idea that the productivity and wages of workers are not necessarily equal has long attracted the attention of many economists. Indeed, the lack of a method to measure the productivity-wage gap has hindered the development of research on labor economics, productivity analysis, and human capital study. This paper proposes a new empirical method to measure the gap between the value of a worker's marginal product (VMP) and wage. We first define this gap. The method then aggregates the Mincer-...

Modeling of adsorption isotherms of phenol and chlorophenols onto granular activated carbon. Part I. Two-parameter models and equations allowing determination of thermodynamic parameters.

Science.gov (United States)

Hamdaoui, Oualid; Naffrechoux, Emmanuel

2007-08-17

The adsorption equilibrium isotherms of five phenolic compounds from aqueous solutions onto granular activated carbon (GAC) were studied and modeled. Phenol (Ph), 2-chlorophenol (2-CP), 4-chlorophenol (4-CP), 2,4-dichlorophenol (DCP), and 2,4,6-trichlorophenol (TCP) were chosen for the adsorption tests. To predict the adsorption isotherms and to determine the characteristic parameters for process design, seven isotherm models: Langmuir (five linear forms), Freundlich, Elovich, Temkin, Fowler-Guggenheim, Kiselev, and Hill-de Boer models were applied to experimental data. The results reveal that the adsorption isotherm models fitted the data in the order: Fowler-Guggenheim>Hill-de Boer>Temkin>Freundlich>Kiselev>Langmuir isotherms. Adsorption isotherms modeling shows that the interaction of phenolic compounds with activated carbon surface is localized monolayer adsorption, that is adsorbed molecules are adsorbed at definite, localized sites. Each site can accommodate only one molecule. The interaction among adsorbed molecules is repulsive and there is no association between them, adsorption is carried out on energetically different sites and is an exothermic process. Uptake of phenols increases in the order Ph<2-CP<4-CPchlorophenols, it seems that the magnitude of adsorption is directly proportional to their degree of chlorination.

Neurobehavioral approach for evaluation of office workers' productivity: The effects of room temperature

Energy Technology Data Exchange (ETDEWEB)

Lan, Li; Lian, Zhiwei; Pan, Li [School of Mechanical Engineering, Shanghai Jiao Tong University, Shanghai 200240 (China); Ye, Qian [Shanghai Research Institute of Building Science, Shanghai 200041 (China)

2009-08-15

Indoor environment quality has great influence on worker's productivity, and how to assess the effect of indoor environment on productivity remains to be the major challenge. A neurobehavioral approach was proposed for evaluation of office workers' productivity in this paper. The distinguishing characteristic of neurobehavioral approach is its emphasis on the identification and measurement of behavioral changes, for the influence of environment on brain functions manifests behaviorally. Therefore worker's productivity can be comprehensively evaluated by testing the neurobehavioral functions. Four neurobehavioral functions, including perception, learning and memory, thinking, and executive functions were measured with nine representative psychometric tests. The effect of room temperature on performance of neurobehavioral tests was investigated in the laboratory. Four temperatures (19 C, 24 C, 27 C, and 32 C) were investigated based on the thermal sensation from cold to hot. Signal detection theory was utilized to analyze response bias. It was found that motivated people could maintain high performance for a short time under adverse (hot or cold) environmental conditions. Room temperature affected task performance differentially, depending on the type of tasks. The proposed neurobehavioral approach could be worked to quantitatively and systematically evaluate office workers' productivity. (author)

Structural and antimicrobial studies of coordination compounds of VO(II, Co(II, Ni(II and Cu(II with some Schiff bases involving 2-amino-4-chlorophenol

Directory of Open Access Journals (Sweden)

A. P. MISHRA

2009-05-01

Full Text Available Complexes of tailor-made ligands with life essential metal ions may be an emerging area to answer the problem of multi-drug resistance (MDR. The coordination complexes of VO(II, Co(II, Ni(II and Cu(II with the Schiff bases derived from 2-hydroxyacetophenone/2-chlorobenzaldehyde with 2-ami¬no-4-chlorophenol were synthesized and characterized by elemental analysis, molar conductance, electronic spectra, FT-IR, ESR, FAB mass, thermal and magnetic susceptibility measurements. The FAB mass and thermal data show degradation of the complexes. The ligand A (2-hydroxyacetophenone-2amino-4-chlorophenol behaved as tridentate and ligand B (2-chlorobenzylidene-2-amino-4-chlorophenol as bidentate, coordinating through O and N donors. The complexes [VO(A(H2O]×xH2O, [M(A(H2On]×xH2O for Co and Ni, [Cu(A(H2O] and [VO(B2]×xH2O, [M(B2(H2On] for Co and Cu and [Ni(B2] exhibited coordination numbers 4, 5 or 6. X-ray powder diffraction data (a = 11.00417 Å, b = 11.706081 Å and c = 54.46780 Å showed that [Cu(CACP2(H2O2], complex 8, crystallized in the orthorhombic system. The in vitro biological screening effects of the investigated compounds were tested against the bacteria Escherichia coli, Staphylococcus aureus and Streptococcus fecalis and the fungi Aspergillus niger, Trichoderma polysporum and Candida albicans by the serial dilution method. A comparative study of the MIC values of the Schiff base and their [M(B2(H2O2] complexes (Co(II, complex 6 and Cu(II, complex 8, indicated that the metal complexes exhibited a higher or lower antimicrobial activity than 2-chlorobenzylidene-2-amino-4-chlorophenol as the free ligand (B.

About the risk factors on the organs of vision of uranium production workers

International Nuclear Information System (INIS)

Ajtakhanova, A. K.

2010-01-01

The analysis of the results of the preventive medical examination at the uranium production has been conducted by order of Ministry of Health of Kazakhstan, number 243 from 2004.03.12. 352 people have been surveyed, including 36 women, 69 people have been revealed with the pathology, 293 are healthy. Distribution by length of service up to 5 years - 93,5%, up to 8 years: 3 men (6,5%), aged on average 38,9 years. Certain patterns have been revealed at the distribution by ages of 21-30 years, 12 people (26%), from 31-40 years old, 7 patients (15,2%), from 41 to 50 years, 18 men (39,1%), from 51-60 years, 8 persons (17,4%), more than 60 years, 1 person (2,1%). There are 58 people who contact with the hazards of uranium production are in the main production facilities, and 9 people who do not contact with harmful factors are in the additional production facilities. The most common pathology is pathology of vision: 68,6 per 100 employees. 3% of 100 workers have pathology of respiratory diseases. Prevalence of the circulatory system - 22,3%, nervous system diseases - 8,95%, 7,46% of the digestive system, diseases of the blood-7,46%, and other -5,97%. Health status of the working group was estimated by the index of health, i.e. on the basis of the percentage of healthy workers. The index of health among workers at a uranium production is 83,2% of persons per 100 workers. 41 patients-89% of workers were revealed with diseases of the eye and adnexa, 5 of them (10,86%) have an experience more than 5 years in secondary production facilities. With an experience more than 5 years hyperopia increases.

Degradation of 4-Chlorophenol Under Sunlight Using ZnO Nanoparticles as Catalysts

Science.gov (United States)

Rajar, Kausar; Sirajuddin; Balouch, Aamna; Bhanger, M. I.; Sherazi, Tufail H.; Kumar, Raj

2018-03-01

Herein we demonstrate a simplistic microwave assisted chemical precipitation approach regarding the synthesis of zinc oxide nanoparticles. As-prepared ZnO nanoparticles (NPs) were characterized by UV-visible spectroscopy, Fourier transform infra-red spectroscopy, atomic force microscopy and x-ray diffractometry and scrutinized as photo-catalysts for degradation of 4-chlorophenol (4-CP) under sunlight. The study substantiated that 98.5% of 4-CP was degraded within 20 min in the absence of initiator like H2O2 which reflects an outstanding prospective use for ZnO NPs as photo-catalysts. The nanocatalysts were recycled four times and still showed catalytic efficiency up to 95.5% for degradation of 4-CP in the specified 20 min.

76 FR 14101 - Meadwestvaco Corporation, Consumer and Office Products Division, Including On-Site Leased Workers...

Science.gov (United States)

2011-03-15

... undated planning and organizing products. The review shows that on August 21, 2008, a certification of..., Consumer and Office Products Division, Including On-Site Leased Workers From Pro-Tel People, Sidney, NY; Amended Certification Regarding Eligibility To Apply for Worker Adjustment Assistance In accordance with...

Rotating biological contractor treatment of 2-nitrophenol and 2-chlorophenol containing hazardous wastes

International Nuclear Information System (INIS)

Tokuz, R.Y.

1990-01-01

Rotating Biological Contactors (RBCs) have a number of advantages over other biological treatment systems. For example, they can provide high treatment efficiencies of activated sludge systems with much lower energy inputs. Organic shock loads are handled well because large biomass is present. No bulking, foaming, or floating of sludge occurs and sludge has good settleability and dewaterability. Another advantage of RBC systems is the minimal labor requirement for operation and maintenance. Even though RBC systems have these advantages, their acceptance was slow mainly due to operational problems with the earlier units (such as shaft failures) and the lack of considerable design and operation data. A review of literature shows that there is only limited information available on the wastewater treatment with RBCs. Recently, there has been considerable contributions to the knowledge on RBC technology. However, information on the treatment of organic hazardous wastes using RBCs is still very limited. This paper reports that a considerable number of studies on the biological treatment of organic hazardous compounds was sponsored by U.S. Environmental Protection Agency (EPA). For example, an EPA sponsored study examined the effect of such compounds on the performance of activated sludge process. Bench-scale continuous-flow and batch units were used. Influent was settled municipal wastewater to which toxic compounds were added. In batch operations, 2-chlorophenol and pentachlorophenol caused an increase in the effluent Chemical Oxygen Demand (COD) at an influent concentration of 5 mg/L. No adverse effect of 2-nitrophenol on the batch system was reports. 2-Chlorophenol was one of the compounds that upset the performance of continuous-flow activated sludge units, yielding higher than normal levels of effluent suspended solids

Caracterización del proceso de adsorción de 3-cloro fenol desde solución acuosa sobre carbon activado por calorimetria de inmersión Characterization of 3-chlorophenol adsorption process from aqueous solution on activated carbon by immersion calorimetry

Directory of Open Access Journals (Sweden)

Liliana Giraldo

2009-01-01

Full Text Available The immersion enthalpy of activated carbon in 3-chlorophenol solutions, of 100 mg L-1, is determined at different pH values between 3 and 11 with results between 37.6 and 21.2 J g-1. The 3-chlorophenol adsorbed quantities on the activated carbon during the calorimetric experience, are between 1.13 and 2.19 mg g-1, for different pH values of the solution. The 3-chlorophenol adsorbed quantity and the immersion enthalpy decrease by increasing of the pH solution, while increasing the adsorbed quantity increases the immersion enthalpy value.

Production practices affecting worker task demands in concrete operations: A case study.

Science.gov (United States)

Memarian, Babak; Mitropoulos, Panagiotis

2015-01-01

Construction work involves significant physical, mental, and temporal task demands. Excessive task demands can have negative consequences for safety, errors and production. This exploratory study investigates the magnitude and sources of task demands on a concrete operation, and examines the effect of the production practices on the workers' task demands. The NASA Task Load Index was used to measure the perceived task demands of two work crews. The operation involved the construction of a cast-in-place concrete building under high schedule pressures. Interviews with each crew member were used to identify the main sources of the perceived demands. Extensive field observations and interviews with the supervisors and crews identified the production practices. The workers perceived different level of task demands depending on their role. The production practices influenced the task demands in two ways: (1) practices related to work organization, task design, resource management, and crew management mitigated the task demands; and (2) other practices related to work planning and crew management increased the crew's ability to cope with and adapt to high task demands. The findings identify production practices that regulate the workers' task demands. The effect of task demands on performance is mitigated by the ability to cope with high demands.

EFFECT OF NATURAL IRON OXIDE, HYDROGEN PEROXIDE, AND OXALIC ACID ON PHOTOCHEMICAL DEGRADATION OF 2-CHLOROPHENOL

Directory of Open Access Journals (Sweden)

W REMACHE

2014-07-01

Full Text Available The voluntary or accidental release of chemical compounds in the environment is a major cause of pollution of natural waters. Most of chlorophenols are toxic and hardly biodegradable and are difficult to remove from the environment. Therefore, it is important to find innovative and economical methods for the safe and complete destruction. The objective of this work is to test the activity photocatalytic of natural iron oxide (NIO in the photodegradation of 2-chlorophenol (2-CP. The analysis chromatographic with HPLC of solutions exposed under UV irradiation revealed that the degradation of 2-CP was negligible under the condition of using only natural iron oxide. The effect of wavelength on photoreactivity of NIO was also investigated in this process: at high wavelength thus at low energy the efficiency of degradation is important. We have also investigated the activation of NIO by hydrogen peroxide and oxalic acid, The results showed that the photodegradation of 2-CP under UVA irradiation could be enhanced greatly in the presence of oxalate. 2-CP was completly removed after 240 minutes of irradiation when the concentration of oxalic acid is equal to 2.10-3 M. The use of 2.0 % of isopropanol as a scavenger confirmed the intervention of hydroxyl radicals in the photodegradation of 2-CP.

Influence of humic acids of different origins on oxidation of phenol and chlorophenols by permanganate

International Nuclear Information System (INIS)

He Di; Guan Xiaohong; Ma Jun; Yang Xue; Cui Chongwei

2010-01-01

The influences of humic acids (HAs) of different origins, including two commercial HAs, three soil HAs and one aquatic HA, on phenols oxidation by permanganate were studied. The apparent second-order rate constants of 2-chlorophenol (2-CP)/phenol oxidation by permanganate in the presence of HAs at pH 7 followed the order of commercial HA (Shanghai) > soil HAs > commercial HA (Fluka) > aquatic HA. Moreover, the commercial HA (Shanghai) could accelerate the oxidation of different chlorophenols (CP) significantly under neutral condition. The FTIR analysis demonstrated greater content of C=C moieties and less amount of carboxylate, aliphatic groups and polysaccharide-like substances in soil HAs than in aqueous HA, suggesting that the increase of aromaticity in HA was beneficial to the oxidation of phenols by permanganate. The apparent second-order rate constants of 2-CP/phenol oxidation by permanganate in the presence of HAs correlated well with specific visible absorption (SVA) at 665 nm of HAs. High positive correlation coefficients (R 2 > 0.75) implied that π-electrons of HA strongly influenced the reactivity of 2-CP/phenol towards permanganate oxidation, which agreed well with positive correlation between Fluorescence Regional Integration (FRI) and the apparent second-order rate constants. The π-π interaction between HAs and phenols, the steric hindrance effect and the dissociation of phenols may affect the oxidation of phenols by permanganate in the presence of HA at pH = 7.0.

Influence of humic acids of different origins on oxidation of phenol and chlorophenols by permanganate.

Science.gov (United States)

He, Di; Guan, Xiaohong; Ma, Jun; Yang, Xue; Cui, Chongwei

2010-10-15

The influences of humic acids (HAs) of different origins, including two commercial HAs, three soil HAs and one aquatic HA, on phenols oxidation by permanganate were studied. The apparent second-order rate constants of 2-chlorophenol (2-CP)/phenol oxidation by permanganate in the presence of HAs at pH 7 followed the order of commercial HA (Shanghai)>soil HAs>commercial HA (Fluka)>aquatic HA. Moreover, the commercial HA (Shanghai) could accelerate the oxidation of different chlorophenols (CP) significantly under neutral condition. The FTIR analysis demonstrated greater content of CC moieties and less amount of carboxylate, aliphatic groups and polysaccharide-like substances in soil HAs than in aqueous HA, suggesting that the increase of aromaticity in HA was beneficial to the oxidation of phenols by permanganate. The apparent second-order rate constants of 2-CP/phenol oxidation by permanganate in the presence of HAs correlated well with specific visible absorption (SVA) at 665 nm of HAs. High positive correlation coefficients (R(2)>0.75) implied that pi-electrons of HA strongly influenced the reactivity of 2-CP/phenol towards permanganate oxidation, which agreed well with positive correlation between Fluorescence Regional Integration (FRI) and the apparent second-order rate constants. The pi-pi interaction between HAs and phenols, the steric hindrance effect and the dissociation of phenols may affect the oxidation of phenols by permanganate in the presence of HA at pH=7.0. 2010 Elsevier B.V. All rights reserved.

Influence of humic acids of different origins on oxidation of phenol and chlorophenols by permanganate

Energy Technology Data Exchange (ETDEWEB)

He Di, E-mail: hedy1997@hotmail.com [State Key Lab of Urban Water Resource and Environment (HIT), Harbin Institute of Technology, Harbin (China); Guan Xiaohong, E-mail: hitgxh@126.com [State Key Lab of Urban Water Resource and Environment (HIT), Harbin Institute of Technology, Harbin (China); Ma Jun, E-mail: majun@hit.edu.cn [State Key Lab of Urban Water Resource and Environment (HIT), Harbin Institute of Technology, Harbin (China); Yang Xue, E-mail: yangxue1_ok@163.com [State Key Lab of Urban Water Resource and Environment (HIT), Harbin Institute of Technology, Harbin (China); Cui Chongwei, E-mail: cuichongwei1991@126.com [State Key Lab of Urban Water Resource and Environment (HIT), Harbin Institute of Technology, Harbin (China)

2010-10-15

The influences of humic acids (HAs) of different origins, including two commercial HAs, three soil HAs and one aquatic HA, on phenols oxidation by permanganate were studied. The apparent second-order rate constants of 2-chlorophenol (2-CP)/phenol oxidation by permanganate in the presence of HAs at pH 7 followed the order of commercial HA (Shanghai) > soil HAs > commercial HA (Fluka) > aquatic HA. Moreover, the commercial HA (Shanghai) could accelerate the oxidation of different chlorophenols (CP) significantly under neutral condition. The FTIR analysis demonstrated greater content of C=C moieties and less amount of carboxylate, aliphatic groups and polysaccharide-like substances in soil HAs than in aqueous HA, suggesting that the increase of aromaticity in HA was beneficial to the oxidation of phenols by permanganate. The apparent second-order rate constants of 2-CP/phenol oxidation by permanganate in the presence of HAs correlated well with specific visible absorption (SVA) at 665 nm of HAs. High positive correlation coefficients (R{sup 2} > 0.75) implied that {pi}-electrons of HA strongly influenced the reactivity of 2-CP/phenol towards permanganate oxidation, which agreed well with positive correlation between Fluorescence Regional Integration (FRI) and the apparent second-order rate constants. The {pi}-{pi} interaction between HAs and phenols, the steric hindrance effect and the dissociation of phenols may affect the oxidation of phenols by permanganate in the presence of HA at pH = 7.0.

Improving productivity levels: family planning services for factory workers.

Science.gov (United States)

Darmokusumo, H V

1989-10-01

In May 1984, the Minister of Manpower in Indonesia, the Chairman of the BKKBN, and representatives of the employers' and workers' organizations of Indonesia issued a joint decree pledging that they would work together to enhance the implementation of the family planning program among workers in the organized sector. 1 objective of the decree is to improve workers' productivity and the standard of living of workers and their families by implementing a family planning program. 1 baseline survey and a clinic-based survey in 5 provinces revealed that 90% of women workers are between 21-40, or are of reproductive age, and are sexually active. Only about 50% are practicing family planning; the other 50% are afraid to practice family planning due to potential side effects of various methods. This fear was most often caused by negative rumors spread by unsatisfied family planning clients. Placing materials for family planning promotion such as instructional posters and video programs advertising contraceptive services in the work setting may increase knowledge and help alleviate some of this fear. Other studies of family planning services show that employees prefer female medical doctors or midwives as service providers, employees are willing to pay for services (but can only afford a small fee), and family planning service points should be near employees' work sites.

Novel polyamide-based nanofibers prepared by electrospinning technique for headspace solid-phase microextraction of phenol and chlorophenols from environmental samples

Energy Technology Data Exchange (ETDEWEB)

Bagheri, Habib, E-mail: bagheri@sharif.edu [Environmental and Bio-Analytical Laboratories, Department of Chemistry, Sharif University of Technology, Azadi Av., P.O. Box 11365-9516, Tehran (Iran, Islamic Republic of); Aghakhani, Ali; Baghernejad, Masoud; Akbarinejad, Alireza [Environmental and Bio-Analytical Laboratories, Department of Chemistry, Sharif University of Technology, Azadi Av., P.O. Box 11365-9516, Tehran (Iran, Islamic Republic of)

2012-02-24

A novel solid phase microextraction (SPME) fiber was fabricated by electrospinning method in which a polymeric solution was converted to nanofibers using high voltages. A thin stainless steel wire was coated by the network of polymeric nanofibers. The polymeric nanofiber coating on the wire was mechanically stable due to the fine and continuous nanofibers formation around the wire with a three dimensional structure. Polyamide (nylon 6), due to its suitable characteristics was used to prepare the unbreakable SPME nanofiber. The scanning electron microscopy (SEM) images of this new coating showed a diameter range of 100-200 nm for polyamide nanofibers with a homogeneous and porous surface structure. The extraction efficiency of new coating was investigated for headspace solid-phase microextraction (HS-SPME) of some environmentally important chlorophenols from aqueous samples followed by gas chromatography-mass spectrometry (GC-MS) analysis. Effect of different parameters influencing the extraction efficiency including extraction temperature, extraction time, ionic strength and polyamide amount were investigated and optimized. In order to improve the chromatographic behavior of phenolic compounds, all the analytes were derivatized prior to the extraction process using basic acetic anhydride. The detection limits of the method under optimized conditions were in the range of 2-10 ng L{sup -1}. The relative standard deviations (RSD) (n = 3) at the concentration level of 1.7-6.7 ng mL{sup -1} were obtained between 1 and 7.4%. The calibration curves of chlorophenols showed linearity in the range of 27-1330 ng L{sup -1} for phenol and monochlorophenols and 7-1000 ng L{sup -1} for dichloro and trichlorophenols. Also, the proposed method was successfully applied to the extraction of phenol and chlorophenols from real water samples and relative recoveries were between 84 and 98% for all the selected analytes except for 2,4,6 tricholophenol which was between 72 and 74%.

Cold Incineration of Chlorophenols in Aqueous Solution by Advanced Electrochemical Process Electro-Fenton. Effect of Number and Position of Chlorine Atoms on the Degradation Kinetics

Science.gov (United States)

Oturan, Nihal; Panizza, Marco; Oturan, Mehmet A.

2009-09-01

This study reports the kinetics of the degradation of several chlorophenols (CPs), such as monochlorophenols (2-chlorophenol and 4-chlorophenol), dichlorophenols (2,4-dichlorophenol and 2,6- dichlorophenol), trichlorophenols (2,3,5- trichlorophenol and 2,4,5-trichlorophenol), 2,3,5,6-tetrachlorophenol, and pentachlorophenol, by the electro-Fenton process using a carbon felt cathode and a Pt anode. The effect of number and the position of the chlorine atoms in the aromatic ring on the oxidative degradation rate was evaluated and discussed. The oxidation reaction of all the CPs with hydroxyl radicals evidenced a pseudo-first-order kinetics and the rate constant decreased with increasing the number of chlorine atoms. The absolute rate constant of second-order reaction kinetics between CPs and •OH was determined by the competition kinetics method in the range of (3.56-7.75) × 109 M-1 s-1 and follows the same sequence of the apparent rate constants. The mineralization of several CPs and of a mixture of all CPs under study was monitored by the total organic carbon (TOC) removal and the chlorine release during mineralization was followed by ion chromatography. Our results demonstrated that more chlorinated phenols are more difficult to mineralize; however for all the tested CPs, almost quantitative release of chloride ions was obtained after 6 h of treatment.

ASSESMENT OF FACTORS AFFECTING THE PRODUCTIVITY OF AMBER CHARKHA AND ERGONOMIC EVALUATION OF WORKERS

OpenAIRE

G. V. THAKRE; S. G. PATIL; D. N. AGRAWAL

2011-01-01

Increasing demands of the cotton fabrics, now a day has made it necessary to increase the production of cotton fabrics. To increase the production it is necessary to study the factors affecting the performance of the women workers working on Amber charkha. Most of the Amber charkha in rural areas are hand operated (i.e. they runwith the help of human energy input). There are various medical, technical and environmental factors which affect the productivity of women workers working on Amber ch...

75 FR 20390 - Senco Brands, Inc., fka Senco Products, Inc., Including the On-Site Leased Workers of Manpower...

Science.gov (United States)

2010-04-19

... DEPARTMENT OF LABOR Employment and Training Administration [TA-W-70,115] Senco Brands, Inc., fka... workers of Senco Brands, Inc., fka Senco Products, Inc., including the on-site leased workers of Manpower... Brands, Inc., fka Senco Products, Inc. The Department has determined that these workers were sufficiently...

The importance of job control for workers with decreased work ability to remain productive at work

NARCIS (Netherlands)

T.I.J. van den Berg (Tilja); S.J.W. Robroek (Suzan); J.F. Plat (Jan); M.A. Koopmanschap (Marc); A. Burdorf (Alex)

2011-01-01

textabstractPurpose: Workers with decreased work ability are at greater risk of reduced productivity at work. We hypothesized that work-related characteristics play an important role in supporting workers to remain productive despite decreased work ability. Methods: The study population consisted of

The impact of onsite workplace health-enhancing physical activity interventions on worker productivity: a systematic review.

Science.gov (United States)

Pereira, Michelle Jessica; Coombes, Brooke Kaye; Comans, Tracy Anne; Johnston, Venerina

2015-06-01

The aim of this study is to investigate the effects of onsite workplace health-enhancing physical activity (HEPA) programmes on worker productivity. The PROSPERO registration number is CRD42014008750. A search for controlled trials or randomised controlled trials (RCTs) that investigated the effects of onsite workplace HEPA programmes on productivity levels of working adults was performed. Risk of bias of included studies was assessed, and the inter-rater reliability of the quality assessment was analysed. Qualitative synthesis of available evidence is presented. Eight studies were included in the review. There is consistent evidence that onsite workplace HEPA programmes do not reduce levels of sick leave. There appears to be inconsistent evidence of the impact of onsite workplace HEPA programmes on worker productivity. A high-quality study of an onsite combination (aerobic, strengthening and flexibility) HEPA regime and a moderate-quality study of a Tai Chi programme improved worker productivity measured with questionnaires in female laundry workers and older female nurses, respectively. Two high-quality studies and four moderate-quality studies did not show benefit. Studies that showed benefit were mainly those designed with productivity measures as primary outcomes, delivered to occupations involved with higher physical loads, and had higher compliance and programme intensity. The small number of studies and the lack of consistency among studies limited further analyses. There is inconsistent evidence that onsite workplace HEPA programmes improve self-reported worker productivity. Future high-quality RCTs of onsite workplace HEPA programmes should be designed around productivity outcomes, target at-risk groups and investigate interventions of sufficient intensity. High attendance with improved recording is needed to achieve significant results in augmenting worker productivity. Published by the BMJ Publishing Group Limited. For permission to use (where not

Bioremediation of soils contaminated with polycyclic aromatic hydrocarbons, petroleum, pesticides, chlorophenols and heavy metals by composting: Applications, microbes and future research needs.

Science.gov (United States)

Chen, Ming; Xu, Piao; Zeng, Guangming; Yang, Chunping; Huang, Danlian; Zhang, Jiachao

2015-11-01

Increasing soil pollution problems have caused world-wide concerns. Large numbers of contaminants such as polycyclic aromatic hydrocarbons (PAHs), petroleum and related products, pesticides, chlorophenols and heavy metals enter the soil, posing a huge threat to human health and natural ecosystem. Chemical and physical technologies for soil remediation are either incompetent or too costly. Composting or compost addition can simultaneously increase soil organic matter content and soil fertility besides bioremediation, and thus is believed to be one of the most cost-effective methods for soil remediation. This paper reviews the application of composting/compost for soil bioremediation, and further provides a critical view on the effects of this technology on microbial aspects in contaminated soils. This review also discusses the future research needs for contaminated soils. Copyright © 2015 Elsevier Inc. All rights reserved.

Evaluating the Impacts of Health, Social Network and Capital on Craft Efficiency and Productivity: A Case Study of Construction Workers in China.

Science.gov (United States)

Yuan, Jingfeng; Yi, Wen; Miao, Mengyi; Zhang, Lei

2018-02-15

The construction industry has been recognized, for many years, as among those having a high likelihood of accidents, injuries and occupational illnesses. Such risks of construction workers can lead to low productivity and social problems. As a result, construction workers' well-being should be highly addressed to improve construction workers' efficiency and productivity. Meanwhile, the social support from a social network and capital (SNC) of construction workers has been considered as an effective approach to promote construction workers' physical and mental health (P&M health), as well as their work efficiency and productivity. Based on a comprehensive literature review, a conceptual model, which aims to improve construction workers' efficiency and productivity from the perspective of health and SNC, was proposed. A questionnaire survey was conducted to investigate the construction workers' health, SNC and work efficiency and productivity in Nanjing, China. A structural equation model (SEM) was employed to test the three hypothetical relationships among construction workers' P&M health, SNC and work efficiency and productivity. The results indicated that the direct impacts from construction workers' P&M health on work efficiency and productivity were more significant than that from the SNC. In addition, the construction workers' social capital and the network can indirectly influence the work efficiency and productivity by affecting the construction workers' P&M health. Therefore, strategies for enhancing construction workers' efficiency and productivity were proposed. Furthermore, many useable suggestions can be drawn from the research findings from the perspective of a government. The identified indicators and relationships would contribute to the construction work efficiency and productivity assessment and health management from the perspective of the construction workers.

Education and Knowledge Production in Workers' Struggles: Learning to Resist, Learning from Resistance

Science.gov (United States)

Choudry, Aziz; Bleakney, David

2013-01-01

Trade unions and other sites of community-labour organizing such as workers centres are rich, yet contested spaces of education and knowledge production in which both non-formal and informal / incidental forms of learning occur. Putting forward a critique of dominant strands of worker education, the authors ask what spaces exist for social…

Amorphous TiO2 doped with carbon for visible light photodegradation of rhodamine B and 4-chlorophenol

International Nuclear Information System (INIS)

Shao, Penghui; Tian, Jiayu; Zhao, Zhiwei; Shi, Wenxin; Gao, Shanshan; Cui, Fuyi

2015-01-01

Graphical abstract: - Highlights: • Amorphous TiO 2 doped with carbon is prepared as a visible photocatalyst. • RhB and 4-chlorophenol are decomposed effectively by carbon-doped amorphous TiO 2 . • The mechanism for visible light photocatalysis is discussed detailedly. - Abstract: Visible light photocatalytic activity of amorphous TiO 2 doped with carbon is prepared by a facile sol-gel route for the first time. The most active sample with mesostructure of amorphous phase, high surface area (273 m 2 g −1 ) and large pore volume (0.33 cm 3 g −1 ) is identified by X-ray diffractometer, Raman spectrometer, transmission electron microscope and N 2 adsorption–desorption isotherms. In addition, the most active sample is characterized by Fourier transform-infrared spectrometer, X-ray photoelectron spectrometer, UV–vis diffuse reflectance spectrometer and luminescence spectrometer. The results show that the most active sample with oxygenic groups has a narrower bandgap and lower recombination of electron–hole, due to the carbon doping and phase of amorphous. Effective photodegradation capability and stability of rhodamine B and colorless 4-chlorophenol are verified by photocatalytic tests under visible light irradiation. A possible mechanism of amorphous TiO 2 doped with carbon for visible light photocatalysis is proposed. The findings of this paper will provide new insights to design visible light-induced photocatalyst based on amorphous TiO 2 for organic removal

Sorption of 2-Chlorophenol from aqueous solutions by functionalized cross-linked polymers

Directory of Open Access Journals (Sweden)

Rodrigo Martins Fráguas

2013-01-01

Full Text Available This manuscript describes the synthesis of three polymers based on styrene (STY, divinylbenzene (DVB and two different vinyl monomers: methyl methacrylate (MMA and acrylonitrile (AN. The STY-DVB, STY-DVB-MMA and STY-DVB-AN polymers were synthesized employing the aqueous suspension technique. Reaction yields were 73%, 81% and 75%, respectively. They were morphological and chemically characterized using different techniques. The extraction capacity of the polymers was evaluated using 2-chlorophenol. The polymer extraction capacities were evaluated varying contact time the (1 h, 3 h and 5 h, temperature (30 °C, 35 °C and 40 °C, and pH (3, 5.6 and 8. The STY-DVB-AN polymer was the most efficient; it removed around 95% of the analyte using a contact time 50 h.

Mortality among workers at a nuclear fuels production facility

International Nuclear Information System (INIS)

Cragle, D.L.; McLain, R.W.; Qualters, J.R.; Hickey, J.L.; Wilkinson, G.S.; Tankersley, W.G.; Lushbaugh, C.C.

1988-01-01

A retrospective cohort mortality study was conducted in a population of workers employed at a facility with the primary task of production of nuclear fuels and other materials. Data for hourly and salaried employees were analyzed separately by time period of first employment and length of employment. The hourly (N = 6687 with 728 deaths) and salaried (N = 2745 with 294 deaths) employees had a mortality experience comparable to that of the United States and, in fact, exhibited significant fewer deaths in many categories of diseases that are traditionally associated with the healthy worker effect. Specifically, fewer deaths were noted in the categories of all causes, all cancers, cancer of the digestive organs, lung cancer, brain cancer (hourly workers only), diabetes, all diseases of the circulatory system, all respiratory diseases, all digestive system diseases, all diseases of the genitourinary system (hourly only), and all external causes of death. A statistically significant, and as yet unexplained increase in leukemia mortality (6 observed vs. 2.18 expected) appeared among a subset of the hourly employees, first hired before 1955, and employed between 5-15 years

A Multiobjective Stochastic Production-Distribution Planning Problem in an Uncertain Environment Considering Risk and Workers Productivity

Directory of Open Access Journals (Sweden)

S. M. J. Mirzapour Al-e-Hashem

2011-01-01

Full Text Available A multi-objective two stage stochastic programming model is proposed to deal with a multi-period multi-product multi-site production-distribution planning problem for a midterm planning horizon. The presented model involves majority of supply chain cost parameters such as transportation cost, inventory holding cost, shortage cost, production cost. Moreover some respects as lead time, outsourcing, employment, dismissal, workers productivity and training are considered. Due to the uncertain nature of the supply chain, it is assumed that cost parameters and demand fluctuations are random variables and follow from a pre-defined probability distribution. To develop a robust stochastic model, an additional objective functions is added to the traditional production-distribution-planning problem. So, our multi-objective model includes (i the minimization of the expected total cost of supply chain, (ii the minimization of the variance of the total cost of supply chain and (iii the maximization of the workers productivity through training courses that could be held during the planning horizon. Then, the proposed model is solved applying a hybrid algorithm that is a combination of Monte Carlo sampling method, modified -constraint method and L-shaped method. Finally, a numerical example is solved to demonstrate the validity of the model as well as the efficiency of the hybrid algorithm.

75 FR 38127 - Visteon Systems, LLC North Penn Plant Electronics Products Group Including On-Site Leased Workers...

Science.gov (United States)

2010-07-01

..., North Penn Plant, Electronics Products Group to be covered by this certification. The intent of the... North Penn Plant Electronics Products Group Including On-Site Leased Workers From Ryder Integrated... Certification Regarding Eligibility To Apply for Worker Adjustment Assistance and Alternative Trade Adjustment...

Novel polyamide-based nanofibers prepared by electrospinning technique for headspace solid-phase microextraction of phenol and chlorophenols from environmental samples

International Nuclear Information System (INIS)

Bagheri, Habib; Aghakhani, Ali; Baghernejad, Masoud; Akbarinejad, Alireza

2012-01-01

A novel solid phase microextraction (SPME) fiber was fabricated by electrospinning method in which a polymeric solution was converted to nanofibers using high voltages. A thin stainless steel wire was coated by the network of polymeric nanofibers. The polymeric nanofiber coating on the wire was mechanically stable due to the fine and continuous nanofibers formation around the wire with a three dimensional structure. Polyamide (nylon 6), due to its suitable characteristics was used to prepare the unbreakable SPME nanofiber. The scanning electron microscopy (SEM) images of this new coating showed a diameter range of 100–200 nm for polyamide nanofibers with a homogeneous and porous surface structure. The extraction efficiency of new coating was investigated for headspace solid-phase microextraction (HS-SPME) of some environmentally important chlorophenols from aqueous samples followed by gas chromatography–mass spectrometry (GC–MS) analysis. Effect of different parameters influencing the extraction efficiency including extraction temperature, extraction time, ionic strength and polyamide amount were investigated and optimized. In order to improve the chromatographic behavior of phenolic compounds, all the analytes were derivatized prior to the extraction process using basic acetic anhydride. The detection limits of the method under optimized conditions were in the range of 2–10 ng L −1 . The relative standard deviations (RSD) (n = 3) at the concentration level of 1.7–6.7 ng mL −1 were obtained between 1 and 7.4%. The calibration curves of chlorophenols showed linearity in the range of 27–1330 ng L −1 for phenol and monochlorophenols and 7–1000 ng L −1 for dichloro and trichlorophenols. Also, the proposed method was successfully applied to the extraction of phenol and chlorophenols from real water samples and relative recoveries were between 84 and 98% for all the selected analytes except for 2,4,6 tricholophenol which was between 72 and 74%.

Catalytic wet air oxidation of 2-chlorophenol over sewage sludge-derived carbon-based catalysts

Energy Technology Data Exchange (ETDEWEB)

Tu, Yuting [Institut de recherches sur la catalyse et l’environnement de Lyon (IRCELYON), CNRS – Université Claude Bernard Lyon 1, 2 Avenue Albert Einstein, 69626 Villeurbanne Cedex (France); School of Environmental Science and Engineering, Sun Yat-Sen University, Guangzhou 510275 (China); Xiong, Ya; Tian, Shuanghong [School of Environmental Science and Engineering, Sun Yat-Sen University, Guangzhou 510275 (China); Guangdong Provincial Key Laboratory of Environmental Pollution Control and Remediation Technology, Guangzhou 510275 (China); Kong, Lingjun [School of Environmental Science and Engineering, Sun Yat-Sen University, Guangzhou 510275 (China); Descorme, Claude, E-mail: claude.descorme@ircelyon.univ-lyon1.fr [Institut de recherches sur la catalyse et l’environnement de Lyon (IRCELYON), CNRS – Université Claude Bernard Lyon 1, 2 Avenue Albert Einstein, 69626 Villeurbanne Cedex (France)

2014-07-15

Highlights: • A sewage sludge derived carbon-supported iron oxide catalyst (FeSC) was prepared. • FeSC exhibited high catalytic activity in the wet air oxidation of 2-chlorophenol. • A strong correlation was observed between the 2-CP conversion, the iron leaching and the pH. • Using an acetate buffer, the iron leaching was suppressed while keeping some catalytic activity. • A simplified reaction pathway was proposed for the CWAO of 2-CP over the FeSC catalyst. - Abstract: A sewage sludge derived carbon-supported iron oxide catalyst (FeSC) was prepared and used in the Catalytic Wet Air Oxidation (CWAO) of 2-chlorophenol (2-CP). The catalysts were characterized in terms of elemental composition, surface area, pH{sub PZC}, XRD and SEM. The performances of the FeSC catalyst in the CWAO of 2-CP was assessed in a batch reactor operated at 120 °C under 0.9 MPa oxygen partial pressure. Complete decomposition of 2-CP was achieved within 5 h and 90% Total Organic Carbon (TOC) was removed after 24 h of reaction. Quite a straight correlation was observed between the 2-CP conversion, the amount of iron leached in solution and the pH of the reaction mixture at a given reaction time, indicating a strong predominance of the homogeneous catalysis contribution. The iron leaching could be efficiently prevented when the pH of the solution was maintained at values higher than 4.5, while the catalytic activity was only slightly reduced. Upon four successive batch CWAO experiments, using the same FeSC catalyst recovered by filtration after pH adjustment, only a very minor catalyst deactivation was observed. Finally, based on all the identified intermediates, a simplified reaction pathway was proposed for the CWAO of 2-CP over the FeSC catalyst.

Holland Code, Job Satisfaction and Productivity in Clothing Factory Workers.

Science.gov (United States)

Heesacker, Martin; And Others

Published research on vocational interests and personality has not often assessed the characteristics of workers and the work environment in blue-collar, women-dominated industries. This study administered the Self-Directed Search (Form E) to 318 sewing machine operators in three clothing factories. Holland codes, productivity, job satisfaction,…

Shift work and mental health sickness absence : A 10-year observational cohort study among male production workers

NARCIS (Netherlands)

Norder, Giny; Roelen, Corne A. M.; Bultmann, Ute; van der Klink, Jac J. L.

Objectives Epidemiological studies investigating mental-health-related sickness absence (SA) among shift workers are lacking. This 10-year observational study investigated the risk of mental health SA among shift compared with day workers. Methods The data of 5826 male production workers were used

[Degradation of 4-chlorophenol in aqueous solution by high-voltage pulsed discharge-ozone technology].

Science.gov (United States)

Wen, Yuezhong; Jiang, Xuanzhen; Liu, Weiping

2002-03-01

The combination of high voltage pulse discharge and ozonation as an advanced oxidation technology was used to investigate the degradation of 4-chlorophenol (4-CP) in water. The factors that affect the rate of degradation were discussed. The 1.95 x 10(-3) mol/L solutions of 4-CP were almost completely (96%) degraded after the discharge treatment of 30 min. The degradation of 4-CP was investigated as a function of the ozone concentration, radical scavenger and electrode distance. The rate of 4-CP degradation increases with an increase in ozone concentration and a decrease in the electrode distance from 20 mm to 10 mm. The presence of radical scavenger decreased the rate of 4-CP degradation.

Distribution of Some Elements in Biosubstrates of Workers Occupied in the Production of Mineral Nitrogenous Phosphate Fertilizers

CERN Document Server

Gorbunov, A V; Lyapunov, S M; Okina, O I; Pavlov, S S; Geological Institute RAS, Moscow, Russia

2005-01-01

The data on the content of some trace elements typical for the production of nitrogenous phosphate fertilizers (F, Sr, rare-earth elements), as well as heavy and toxic metals in industrial products, occupational air, drinking water and biosubstrates (urine, hair) of the factory workers are presented. The correlations between the content of fluorine in urine and hair of workers and between the content of fluorine, length of service and age, have been shown. The correlation dependence between the content of F in biosubstrates and a number of trace elements typical for the given type of production has been evaluated. The comparison of the morbidity and character of diseases of the factory workers and of the local residents unoccupied in the production has been made.

p-Chlorophenol adsorption on activated carbons with basic surface properties

Science.gov (United States)

Lorenc-Grabowska, Ewa; Gryglewicz, Grażyna; Machnikowski, Jacek

2010-05-01

The adsorption of p-chlorophenol (PCP) from aqueous solution on activated carbons (ACs) with basic surface properties has been studied. The ACs were prepared by two methods. The first method was based on the modification of a commercial CWZ AC by high temperature treatment in an atmosphere of ammonia, nitrogen and hydrogen. The second approach comprised the carbonization followed by activation of N-enriched polymers and coal tar pitch using CO 2 and steam as activation agent. The resultant ACs were characterized in terms of porous structure, elemental composition and surface chemistry (pH PZC, acid/base titration, XPS). The adsorption of PCP was carried out from an aqueous solution in static conditions. Equilibrium adsorption isotherm was of L2 type for polymer-based ACs, whereas L3-type isotherm was observed for CWZ ACs series. The Langmuir monolayer adsorption capacity was related to the porous structure and the amount of basic sites. A good correlation was found between the adsorption capacity and the volume of micropores with a width water molecule adsorption on the PCP uptake is discussed.

Physical and biological parameters that determine the fate of p-chlorophenol in laboratory test systems

International Nuclear Information System (INIS)

Pritchard, P.H.; O'Neill, E.J.; Spain, C.M.; Ahearn, D.G.

1987-01-01

Shake-flask and microcosm studies were conducted to determine the fate of para-chlorophenol (p-CP) in water and sediment systems and the role of sediment and nonsediment surfaces in the biodegradation process. Biodegradation of p-CP in estuarine water samples in shake flasks was slow over incubation periods of 300 h. The addition of detrital sediment resulted in immediate and rapid degradation evidence by the production of 14 CO 2 from [ 14 C]p-CP. The addition of sterile sediment, glass beads, or sand resulted in approximately four to six times more CO 2 evolution than observed in the water alone. Densities of p-CP-degrading bacteria associated with the detrital sediment were 100 times greater than those enumerated in water. Bacteria in the water and associated with the sediment after preexposure of both water and sediment of p-CP demonstrated enhanced biodegradation. In some microcosms, p-CP was degraded completely in the top 1.0 cm of intact sediment beds. Sediment reworking activities by benthic invertebrates from one site were sufficient to mix p-CP deep into the sediment bed faster than biodegradation or molecular diffusion. p-CP was persistent at lower depths of the sediment, possibly a result of reduced oxygen conditions preventing aerobic biodegradation

On the Distribution of Worker Productivity: The Case for Teacher Effectiveness and Student Achievement. CEDR Working Paper. WP #2016-10

Science.gov (United States)

Goldhaber, Dan; Startz, Richard

2016-01-01

It is common to assume that worker productivity is normally distributed, but this assumption is rarely if ever tested. We estimate the distribution of worker productivity where individual productivity is measured with error, using the productivity of elementary school teachers as an example. Proposals to improve teacher productivity often focus on…

Mortality and cancer morbidity among cement production workers: a meta-analysis.

Science.gov (United States)

Donato, Francesca; Garzaro, Giacomo; Pira, Enrico; Boffetta, Paolo

2016-11-01

To analyze overall and cause-specific mortality, especially from cancer, among cement production workers. Results from some epidemiological studies suggested an increased risk of overall mortality and of stomach cancer associated with employment in the cement production, but the presence of a hazard and, if present, the magnitude of a risk have not been precisely quantified. We conducted a systematic review and meta-analysis of data on mortality from all causes, cardiovascular or respiratory diseases, and cancer among cement workers. The literature search in PubMed and Scopus up to February 2016 and with appropriate keywords on mortality among cement workers revealed 188 articles which were screened. A total of 117 articles were reviewed in full text and 12 articles, referring to 11 study populations, were found to be relevant and of sufficient quality for further analysis. Meta-analyses were performed using a random-effects model. Eight cohort studies, one proportionate mortality study, and two case-control studies were identified. The summary RRs were 0.89 [95 % confidence interval (CI) 0.76-1.01] for all-cause mortality, 0.94 (95 %, CI 0.80-1.08) for cancer mortality, 1.07 (95 % CI 0.79-1.35) for lung cancer mortality, and 0.93 (95 % CI 0.70-1.17) for stomach cancer mortality, respectively. Significant heterogeneity in results was observed among studies. The present meta-analysis does not provide evidence of increased risk of overall mortality, as well as cancer, cardiovascular or respiratory mortality in relation to employment in cement production.

Does the Holland Code Predict Job Satisfaction and Productivity in Clothing Factory Workers?

Science.gov (United States)

Heesacker, Martin; And Others

1988-01-01

Administered Self-Directed Search to sewing machine operators to determine Holland code, and assessed work productivity, job satisfaction, absenteeism, and insurance claims. Most workers were of the Social code. Social subjects were the most satisfied, Conventional and Realistic subjects next, and subjects of other codes less so. Productivity of…

Distribution of some trace elements in biosubstrates of workers occupied in the production of mineral nitrogenous phosphate fertilizers

International Nuclear Information System (INIS)

Gorbunov, A.V.; Lyapunov, S.M.; Okina, O.I.; Frontasyeva, M.V.; Pavlov, S.S.

2005-01-01

The data on the content of some trace elements typical for the production of nitrogeneous phosphate fertilizers (F, Sr, rare-earth elements), as well as heavy and toxic metals in industrial products, occupational air, drinking water and bio substrates (urine, hair) of the factory workers are presented. The correlations between the content of fluorine in urine and hair of workers and between the content of fluorine, length of service and age, have been shown. The correlation dependence between the content of F in bio substrates and a number of trace elements typical for the given type of production has been evaluated. The comparison of the morbidity and character of diseases of the factory workers and of the local residents unoccupied in the production has been made

Information, Technology and Information Worker Productivity: Task Level Evidence

OpenAIRE

Sinan Aral; Erik Brynjolfsson; Marshall Van Alstyne

2007-01-01

In an effort to reveal the fine-grained relationships between IT use, patterns of information flows, and individual information-worker productivity, we study task level practices at a midsize executive recruiting firm. We analyze both project-level and individual-level performance using: (1) detailed accounting data on revenues, compensation, project completion rates, and team membership for over 1300 projects spanning 5 years, (2) direct observation of over 125,000 email messages over a peri...

The enhanced photoactivity of nanosized Bi2WO6 catalyst for the degradation of 4-chlorophenol

International Nuclear Information System (INIS)

Fu Hongbo; Yao Wenqing; Zhang Liwu; Zhu Yongfa

2008-01-01

Nanosized Bi 2 WO 6 catalyst exhibited the enhanced photoactivity for the degradation of 4-chlorophenol (4-CP) under visible irradiation compared to the sample prepared by high-temperature solid reaction. The photoactivity of the catalyst was sensitive to pH variation of the suspension. Nanosized Bi 2 WO 6 catalyst showed the highest activity at pH 7.2. The photodegradation of 4-CP by nanosized Bi 2 WO 6 catalyst followed a pseudo-first-order reaction. After three recycling runs for the photodegradation of 4-CP, the activity of the catalyst did not show any significant loss, suggesting that the catalyst was stable under visible irradiation

Does the Unemployement Benefit Institution Affect the Productivity of Workers? Evidence from a Field Experiment

NARCIS (Netherlands)

Blanco, M.; Dalton, P.S.; Vargas, J.F.

2013-01-01

Abstract: We investigate whether and how the type of unemployment bene t institution affects productivity. We designed a field experiment to compare workers' productivity under a welfare system, where the unemployed receive an unconditional monetary transfer, with their productivity under a workfare

Respiratory symptoms and pulmonary function tests in security and safety products plant workers.

Science.gov (United States)

Balbay, Ege Gulec; Toru, Umran; Arbak, Peri; Balbay, Oner; Suner, Kezban Ozmen; Annakkaya, Ali Nihat

2014-01-01

Lock and key factory workers are under the risk of metal pneumoconiosis and occupational asthma. In this cross-sectional study, it's aimed to evaluate the relationship between metal dust exposure and respiratory symptoms, pulmonary function tests of workers in different section of lock and key factory. 54 male workers (mean age, 32.8 ± 5.4) in a security and safety products plant were evaluated for respiratory symptoms, pulmonary function tests and smoking habits. Results have been interpreted by comparison of the painting (28/54) and grinding group workers (26/54). There was no significant difference between painting (32.1 ± 4.8) and grinding (33.6 ± 6.1) groups regarding mean age (P > 0.05). Smokers were in significantly higher in grinding group (18/26). Cough and sputum were reported 14.3% (4/28) in painting and 3.8% (1/26) in grinding workers (P > 0.05). Chest tightness was seen in 7.1% and 7.7% of painting and grinding workers, respectively (P > 0.05). But no chest tightness was reported in both groups when they were away work. Breathlessness was seen in 10.7% and 7.7% of painting and grinding workers, respectively (P > 0.05). Breathlessness was similar in both groups (7.1% vs. 3.8%) when they were away work. When comparing painting and grinding workers respiratory functions no significant difference observed. Chest radiography in painting and grinding workers showed hyperlucency (3.6% vs.11.4%), respectively. Painting groups in lock and key factory workers had more but statistically insignificantrespiratory complaints. Interestingly, chest tightness was only observed when both groups were at work. It was thought that ventilation and using personal protective equipment in factory could provide significant benefits.

Does the queen win it all? Queen-worker conflict over male production in the bumblebee, Bombus terrestris

Science.gov (United States)

Alaux, Cédric; Savarit, Fabrice; Jaisson, Pierre; Hefetz, Abraham

Social insects provide a useful model for studying the evolutionary balance between cooperation and conflict linked to genetic structure. We investigated the outcome of this conflict in the bumblebee, Bombus terrestris, whose annual colony life cycle is characterized by overt competition over male production. We established artificial colonies composed of a queen and unrelated workers by daily exchange of callow workers between colony pairs of distinct genetic make-up. Using microsatellite analysis, this procedure allowed an exact calculation of the proportion of worker-derived males. The development and social behavior of these artificial colonies were similar to those of normal colonies. Despite a high worker reproduction attempt (63.8% of workers had developed ovaries and 38.4% were egg-layers), we found that on average 95% of the males produced during the competition phase (CPh) were queen-derived. However, in four colonies, queen death resulted in a considerable amount of worker-derived male production. The different putative ultimate causes of this efficient control by the queen are discussed, and we suggest a possible scenario of an evolutionary arms race that may occur between these two female castes.

Effects of Heat Stress on Construction Labor Productivity in Hong Kong: A Case Study of Rebar Workers

OpenAIRE

Yi, Wen; Chan, Albert P. C.

2017-01-01

Global warming is bringing more frequent and severe heat waves, and the result will be serious for vulnerable populations such as construction workers. Excessive heat stress has profound effects on physiological responses, which cause occupational injuries, fatalities and low productivity. Construction workers are particularly affected by heat stress, because of the body heat production caused by physically demanding tasks, and hot and humid working conditions. Field studies were conducted be...

Longitudinal and Cross-sectional Analyses of Lung Function in Toluene Diisocyanate Production Workers.

Science.gov (United States)

Wang, Mei Lin; Storey, Eileen; Cassidy, Laura D; Doney, Brent; Conner, Patrick R; Collins, James J; Carson, Michael; Molenaar, Don

2017-12-01

The aim of this study was to investigate lung function among toluene diisocyanate (TDI) production workers. One hundred ninety-seven U.S workers performed spirometry from 2006 through 2012. Results were compared within the study cohort and with U.S. population measures. A mixed-effects model assessed factors affecting repeated forced expiratory volume in 1 second (FEV1) measurements. The cohort's mean FEV1 and forced vital capacity (FVC) percent reference values, although greater than 90%, were significantly lower and the prevalence of abnormal spirometry (predominantly restrictive pattern) was significantly higher than in the U.S. Differences in lung function among workers with higher cumulative TDI exposure were in the direction of an exposure effect, but not significant. We found little evidence of an adverse effect of TDI exposure on longitudinal spirometry in these workers. The association between TDI exposure and the increasing prevalence of a restrictive pattern needs further exploration.

A strategy for improving worker satisfaction and job attitudes in a repetitive industrial task: application of production standards and performance feedback.

Science.gov (United States)

Shikdar, Ashraf A; Das, Biman

2003-04-15

Worker satisfaction improved significantly as a consequence of the provision of the assigned and participative standards with performance feedback in a repetitive industrial production task. The maximum improvement in worker satisfaction was found for the participative standard and feedback condition. Only this condition had a significant positive effect on worker job attitudes. Monetary incentive, when provided with an assigned or participative standard with feedback, added no incremental worker satisfaction or job attitudes gain. The participative standard with feedback condition emerges as the optimum strategy for improving worker satisfaction and job attitudes in a repetitive industrial production task.

The importance of job control for workers with decreased work ability to remain productive at work.

Science.gov (United States)

van den Berg, Tilja I; Robroek, Suzan J; Plat, Jan F; Koopmanschap, Marc A; Burdorf, Alex

2011-08-01

Workers with decreased work ability are at greater risk of reduced productivity at work. We hypothesized that work-related characteristics play an important role in supporting workers to remain productive despite decreased work ability. The study population consisted of 10,542 workers in 49 different companies in the Netherlands in 2005-2009. Productivity loss at work was defined on a 10-point scale by asking how much work was actually performed during regular hours on the last regular workday when compared with normal. Independent variables in the logistic regression analysis were individual characteristics, work-related factors, and the work ability index. Additive interactions between work-related factors and decreased work ability were evaluated by the relative excess risk due to interaction (RERI). The odds ratios and 95% confidence intervals (CI) for the likelihood of productivity loss at work were 2.03 (1.85-2.22), 3.50 (3.10-3.95), and 5.54 (4.37-7.03) for a good, moderate, and poor work ability, compared with an excellent work ability (reference group). Productivity loss at work was associated with lack of job control, poor skill discretion, and high work demands. There was a significant interaction between decreased work ability and lack of job control (RERI = 0.63 95% CI 0.11-1.16) with productivity loss at work. The negative effects on work performance of decreased work ability may be partly counterbalanced by increased job control. This suggests that interventions among workers with (chronic) disease that cause a decreased work ability should include enlargement of possibilities to plan and pace their own activities at work.

[Factors of work environment and employment of workers in production of fuels and solvents at the oil refinery].

Science.gov (United States)

Chebotarev, P A; Kharlashova, N V

2012-01-01

Factors of the industrial environment and labor activity of workers of manufacture propellants and solvents at the oil refining enterprise. Working conditions of workers at all installations of manufacture No 1 JSC "Naftan" of Novopolotsk of Byelorussia (production of fuels and solvents). Hygienic evaluation of working conditions of persons working in the production of fuels and solvents at the oil refinery. Sanitary description of the production with hygienic analysis of project design and technological documentation, qualitative and quantitative characteristics of conventional methods in the work environment and working process of employees in the workplace for the main modes of operation of the equipment. The working environment of refineries is influenced by a number of simultaneously acting factors, which have different material nature and characteristics of the action on the human body, the workers in production of fuels and solvents at the refinery, are exposed to a variety of hazardous and dangerous factors of production, a chemical factor is prevalent, of course.

Effects of occupational illness on labor productivity: A socioeconomic aspect of informal sector workers in urban Bangladesh.

Science.gov (United States)

Sarker, Abdur Razzaque; Sultana, Marufa; Mahumud, Rashidul Alam; Ahmed, Sayem; Ahmed, Mohammad Wahid; Hoque, Mohammad Enamul; Islam, Ziaul; Gazi, Rukhsana; Khan, Jahangir A M

2016-05-25

The informal sector is the dominant area of employment and the economy for any developing country including Bangladesh. The cost of productivity loss due to absence from work or presenteeism with illness has rarely been examined in the Bangladesh context. This current study, therefore, attempted to examine the impact of ill health of informal sector workers on labor productivity, future earning, and healthcare-related expenditure. A cross-sectional survey was conducted among three occupational groups of informal workers (rickshaw pullers, shopkeepers and restaurant workers) that were generally found in all urban areas in Bangladesh. A total of 557 informal workers were surveyed for this study. Most of the respondents (57%) reported that they had been affected by some type of illness for the last six months. The overall average healthcare expenditure of informal workers was US$48.34, while restaurant workers expended more (US$53.61). Self reported sickness absenteeism was highest (50.37days) in the case of shop keepers, followed by rickshaw pullers (49.31 days), in the last six months. Considering the income loss due to illness in the past six months, the rickshaw pullers were exposed to the highest income loss (US$197.15), followed by the shop keepers (US$151.39). Although the informal sector contributes the most to the economy of Bangladesh, the workers in this sector have hardly any financial protection. This study provides critical clues to providing financial and social protection to informal sector workers in Bangladesh.

Organizational factors and office workers' health after the World Trade Center terrorist attacks: long-term physical symptoms, psychological distress, and work productivity.

Science.gov (United States)

Osinubi, Omowunmi Y O; Gandhi, Sampada K; Ohman-Strickland, Pamela; Boglarsky, Cheryl; Fiedler, Nancy; Kipen, Howard; Robson, Mark

2008-02-01

To assess if organizational factors are predictors of workers' health and productivity after the World Trade Center attacks. We conducted a survey of 750 workers and compared those who had direct exposures to the World Trade Center attacks (south of Canal Street workers; primary victims) with those less directly exposed (north of Canal Street workers; other victims and non-victims). South of Canal Street workers reported headache more frequently than north of Canal Street workers did (P = 0.0202). Primary victims reported headache and cough more frequently than did other victims and non-victims (P = 0.0086 and 0.0043, respectively). Defensive organizational culture was an independent predictor of cough and job stress, and job stress was an independent predictor of on-the-job productivity losses. Organizational variables may modify health and productivity outcomes after a large-scale traumatic event in the workplace.

PENGUJIAN AKTIVITAS KOMPOSIT Fe2O3-SiO2 SEBAGAI FOTOKATALIS PADA FOTODEGRADASI 4-KLOROFENOL (The Activity Test of Fe2O3-SiO2 Composite As Photocatalyst on 4-Chlorophenol Photodegradation

Directory of Open Access Journals (Sweden)

Eko Sri Kunarti

2009-03-01

Full Text Available ABSTRAK  Pada penelitian ini telah dilakukan pengujian aktivitas komposit Fe2O3-SiO2 sebagai fotokatalis pada fotodegradasi 4-klorofenol. Penelitian diawali dengan preparasi dan karakterisasi fotokatalis Fe2O3-SiO2. Preparasi dilakukan dengan metode sol-gel pada temperatur kamar menggunakan tetraetil ortosilikat (TEOS dan besi (III nitrat sebagai prekursor diikuti dengan perlakuan termal pada temperature 500 oC. Karakterisasi dilakukan dengan metode spektrometri inframerah, difraksi sinar-X dan spektrometri fluoresensi sinar-X. Uji aktivitas komposit untuk fotodegradasi 4-klorofenol dilakukan dalam reaktor tertutup yang dilengkapi dengan lampu UV. Pada uji ini telah dipelajari pengaruh waktu penyinaran dan pH larutan terhadap efektivitas fotodegradasi 4-klorofenol. Hasil penelitian menunjukkan bahwa komposit Fe2O3-SiO2 dapat dipreparasi dengan metode sol-gel pada temperatur kamar diikuti perlakuan termal. Komposit Fe2O3-SiO2 dapat meningkatkan efektivitas fotodegradasi 4-klorofenol dari 11,86 % menjadi 55,38 %. Efektivitas fotodegradasi 4- klorofenol dipengaruhi waktu penyinaran dan pH larutan yang semakin lama waktu penyinaran efektifitas fotodegradasi semakin tinggi, namun waktu penyinaran yang lebih lama dari 4 jam dapat menurunkan efektivitasnya. pH larutan memberikan pengaruh yang berbeda-beda pada efektivitas fotodegradasi 4-klorofenol.   ABSTRACT The activity test of Fe2O3-SiO2 composite as photocatalyst on 4-chlorophenol photodegradation has been studied. The research was initiated by preparation of Fe2O3-SiO2 photocatalyst and followed by characterization. The preparation was conducted by sol-gel method at room temperature using tetraethylorthosilicate (TEOS and iron (III nitrate as precursors followed by thermal treatment at a temperature of 500oC. The characterizations were performed by X-ray Diffraction (XRD, Infrared and X-ray Fluorescence Spectrophotometry. The photocatalytic activity test of composites for 4 chlorophenol

Advanced worker protection system

International Nuclear Information System (INIS)

Caldwell, B.; Duncan, P.; Myers, J.

1995-01-01

The Department of Energy (DOE) is in the process of defining the magnitude and diversity of Decontamination and Decommissioning (D ampersand D) obligations at its numerous sites. The DOE believes that existing technologies are inadequate to solve many challenging problems such as how to decontaminate structures and equipment cost effectively, what to do with materials and wastes generated, and how to adequately protect workers and the environment. Preliminary estimates show a tremendous need for effective use of resources over a relatively long period (over 30 years). Several technologies are being investigated which can potentially reduce D ampersand D costs while providing appropriate protection to DOE workers. The DOE recognizes that traditional methods used by the EPA in hazardous waste site clean up activities are insufficient to provide the needed protection and worker productivity demanded by DOE D ampersand D programs. As a consequence, new clothing and equipment which can adequately protect workers while providing increases in worker productivity are being sought for implementation at DOE sites. This project will result in the development of an Advanced Worker Protection System (AWPS). The AWPS will be built around a life support backpack that uses liquid air to provide cooling as well as breathing gas to the worker. The backpack will be combined with advanced protective garments, advanced liquid cooling garment, respirator, communications, and support equipment to provide improved worker protection, simplified system maintenance, and dramatically improve worker productivity through longer duration work cycles. Phase I of the project has resulted in a full scale prototype Advanced Worker Protection Ensemble (AWPE, everything the worker will wear), with sub-scale support equipment, suitable for integrated testing and preliminary evaluation. Phase II will culminate in a full scale, certified, pre-production AWPS and a site demonstration

Advanced worker protection system

Energy Technology Data Exchange (ETDEWEB)

Caldwell, B.; Duncan, P.; Myers, J.

1995-12-01

The Department of Energy (DOE) is in the process of defining the magnitude and diversity of Decontamination and Decommissioning (D&D) obligations at its numerous sites. The DOE believes that existing technologies are inadequate to solve many challenging problems such as how to decontaminate structures and equipment cost effectively, what to do with materials and wastes generated, and how to adequately protect workers and the environment. Preliminary estimates show a tremendous need for effective use of resources over a relatively long period (over 30 years). Several technologies are being investigated which can potentially reduce D&D costs while providing appropriate protection to DOE workers. The DOE recognizes that traditional methods used by the EPA in hazardous waste site clean up activities are insufficient to provide the needed protection and worker productivity demanded by DOE D&D programs. As a consequence, new clothing and equipment which can adequately protect workers while providing increases in worker productivity are being sought for implementation at DOE sites. This project will result in the development of an Advanced Worker Protection System (AWPS). The AWPS will be built around a life support backpack that uses liquid air to provide cooling as well as breathing gas to the worker. The backpack will be combined with advanced protective garments, advanced liquid cooling garment, respirator, communications, and support equipment to provide improved worker protection, simplified system maintenance, and dramatically improve worker productivity through longer duration work cycles. Phase I of the project has resulted in a full scale prototype Advanced Worker Protection Ensemble (AWPE, everything the worker will wear), with sub-scale support equipment, suitable for integrated testing and preliminary evaluation. Phase II will culminate in a full scale, certified, pre-production AWPS and a site demonstration.

How does accounting for worker productivity affect the measured cost-effectiveness of lumbar discectomy?

Science.gov (United States)

Koenig, Lane; Dall, Timothy M; Gu, Qian; Saavoss, Josh; Schafer, Michael F

2014-04-01

Back pain attributable to lumbar disc herniation is a substantial cause of reduced workplace productivity. Disc herniation surgery is effective in reducing pain and improving function. However, few studies have examined the effects of surgery on worker productivity. We wished to determine the effect of disc herniation surgery on workers' earnings and missed workdays and how accounting for this effect influences the cost-effectiveness of surgery? Regression models were estimated using data from the National Health Interview Survey to assess the effects of lower back pain caused by disc herniation on earnings and missed workdays. The results were incorporated into Markov models to compare societal costs associated with surgical and nonsurgical treatments for privately insured, working patients. Clinical outcomes and utilities were based on results from the Spine Patient Outcomes Research Trial and additional clinical literature. We estimate average annual earnings of $47,619 with surgery and $45,694 with nonsurgical treatment. The increased earnings for patients receiving surgery as compared with nonsurgical treatment is equal to $1925 (95% CI, $1121-$2728). After surgery, we also estimate that workers receiving surgery miss, on average, 3 fewer days per year than if workers had received nonsurgical treatment (95% CI, 2.4-3.7 days). However, these fewer missed work days only partially offset the assumed 20 workdays missed to recover from surgery. More fully accounting for the effects of disc herniation surgery on productivity reduced the cost of surgery per quality-adjusted life year (QALY) from $52,416 to $35,146 using a 4-year time horizon and from $27,359 to $4186 using an 8-year time horizon. According to a sensitivity analysis, the 4-year cost per QALY varies between $27,921 and $49,787 depending on model assumptions. Increased worker earnings resulting from disc herniation surgery may offset the increased direct medical costs associated with surgery. After

Relationship between productivity, quality and musculoskeletal disorder risk among deboning workers in a Chilean salmon industry.

Science.gov (United States)

Ilardi, Juan S

2012-01-01

The purpose of this ergonomic investigation is to establish a relationship between quality, productivity and risk of musculoskeletal disorder (MSD) in manual bone-removal process in the salmon fish industry. The method consists in a follow up study of 14 workers in a lane that processes salmon steak. Time between each steak (work cycle), quality of the steak's meat through inspection of deepness and length of the gapping generated by the manual bone-removal process and risk for musculoskeletal disorders through OCRA method were considered for this study. IMC and musculoskeletal Nordic Questionnaire of Kourinka were applied to the workers evaluated. Fourteen women worker's completed the evaluation, age 37.67 ± 8.1, with 65.27 ± 34.41 months of experience, with an IMC of 27.18 ± 3.87 (1.52 ± 0.057 meters of height) at the time of the evaluation. Time for deboning per steak averaged 38 ± 14 seconds with 68.33 ± 14.79 steaks per hour per worker. In quality terms, 74% of the steaks were qualified as "premium steaks" and 26% as "grade or industrial" (lower category and cheapest price). OCRA index for the right hand average 13.79 ± 4.59 and 3.59 ± 0.41 for the left hand. From Nordic questionnaire 80% of the workers manifested musculoskeletal symptoms in the right hand/wrist, followed up by shoulder with 60% of the workers and arm/elbow with over 50%. There was no statistically significant relationship between productivity and quality of the steak after manual bone removal process and between quality and MSD risk. However, there was a statistically significant relationship between productivity and MSD risk (pproductive sector, considering its importance for this region.

75 FR 43557 - Wire Products Company, Inc., Including Workers Whose Unemployment Insurance (UI) Wages Are Paid...

Science.gov (United States)

2010-07-26

... Products, Inc., Cleveland, OH; Amended Certification Regarding Eligibility To Apply for Worker Adjustment... Hanger Products, Inc. Based on these findings, the Department is amending this certification to include... DEPARTMENT OF LABOR Employment and Training Administration [TA-W-72,711] Wire Products Company...

Spectroscopic studies of some lanthanide(III nitrate complexes synthesized from a new ligand 2,6-bis-(salicylaldehyde hydrazone-4-chlorophenol

Directory of Open Access Journals (Sweden)

A.S. Sall

2003-06-01

Full Text Available The ligand 2,6-bis-(salicylaldehydehydrazone-4-chlorophenol (H5L and its binuclear lanthanide(III nitrate complexes {[Ln2(H4L3(NO3](NO32.mH2O} where Ln = La, Ce, Pr, Nd, Sm, Gd, Dy, Er, Yb and Y, have been synthesized. The complexes were characterized by chemical analysis, conductance, magnetic moment measurements and infrared spectra. Infrared study indicates that the ligand behaves both as neutral and ionic O donors and as neutral N donors.

Workers of Acromyrmex echinatior leafcutter ants police worker-laid eggs, but not reproductive workers

DEFF Research Database (Denmark)

Dijkstra, Michiel B.; van Zweden, Jelle Stijn; Dirchsen, Maria

2010-01-01

Nonreproductive workers of many eusocial Hymenoptera 'police' the colony, that is, they attack reproductive sister workers or destroy their eggs (unfertilized; developing into haploid males). Several ultimate causes of policing have been proposed, including (1) an increase in colony productivity,...... reproductive workers. We infer that relatedness incentives are the most likely ultimate cause of the evolutionary maintenance of worker-egg policing in A. echinatior. (C) 2010 The Association for the Study of Animal Behaviour. Published by Elsevier Ltd. All rights reserved...

Photochemical transformation of anionic 2-nitro-4-chlorophenol in surface waters: Laboratory and model assessment of the degradation kinetics, and comparison with field data

Energy Technology Data Exchange (ETDEWEB)

Sur, Babita [Dipartimento di Chimica, Universita di Torino, Via P. Giuria 5, 10125 Torino (Italy); Department of Chemical Engineering, Calcutta University, 92 Acharya P. C. Road, Kolkata 700009 (India); De Laurentiis, Elisa; Minella, Marco; Maurino, Valter; Minero, Claudio [Dipartimento di Chimica, Universita di Torino, Via P. Giuria 5, 10125 Torino (Italy); Vione, Davide [Dipartimento di Chimica, Universita di Torino, Via P. Giuria 5, 10125 Torino (Italy); Centro Interdipartimentale NatRisk, Universita di Torino, Via Leonardo da Vinci 44, 10095 Grugliasco (Italy)

2012-06-01

Anionic 2-nitro-4-chlorophenol (NCP) may occur in surface waters as a nitroderivative of 4-chlorophenol, which is a transformation intermediate of the herbicide dichlorprop. Here we show that NCP would undergo efficient photochemical transformation in environmental waters, mainly by direct photolysis and reaction with {center_dot}OH. NCP has a polychromatic photolysis quantum yield {Phi}{sub NCP} = (1.27 {+-} 0.22) {center_dot} 10{sup -5}, a rate constant with {center_dot}OH k{sub NCP,}{center_dot}{sub OH} = (1.09 {+-} 0.09) {center_dot} 10{sup 10} M{sup -1} s{sup -1}, a rate constant with {sup 1}O{sub 2}k{sub NCP,1O2} = (2.15 {+-} 0.38) {center_dot} 10{sup 7} M{sup -1} s{sup -1}, a rate constant with the triplet state of anthraquinone-2-sulphonate k{sub NCP,3AQ2S*} = (5.90 {+-} 0.43) {center_dot} 10{sup 8} M{sup -1} s{sup -1}, and is poorly reactive toward CO{sub 3}{sup -}{center_dot}. The k{sub NCP,3AQ2S*} value is representative of reaction with the triplet states of chromophoric dissolved organic matter. The inclusion of photochemical reactivity data into a model of surface-water photochemistry allowed the NCP transformation kinetics to be predicted as a function of water chemical composition and column depth. Very good agreement between model predictions and field data was obtained for the shallow lagoons of the Rhone delta (Southern France). Highlights: Black-Right-Pointing-Pointer Phototransformation kinetics of 2-nitro-4-chlorophenol, relevant to surface waters. Black-Right-Pointing-Pointer Determination of photochemical reactivity data in the laboratory. Black-Right-Pointing-Pointer Model approach to combine photochemical reactivity with environmental variables. Black-Right-Pointing-Pointer Good agreement with field data in lagoon water (Rhone delta, Southern France). Black-Right-Pointing-Pointer Direct photolysis and reaction with {center_dot}OH as main photoprocesses in the environment.

A novel sol-gel-based amino-functionalized fiber for headspace solid-phase microextraction of phenol and chlorophenols from environmental samples

Energy Technology Data Exchange (ETDEWEB)

Bagheri, Habib [Department of Chemistry, Sharif University of Technology, P.O. Box 11365-9516, Tehran (Iran, Islamic Republic of)], E-mail: Bagheri@sharif.edu; Babanezhad, Esmaeil; Khalilian, Faezeh [Department of Chemistry, Sharif University of Technology, P.O. Box 11365-9516, Tehran (Iran, Islamic Republic of)

2008-05-26

A novel amino-functionalized polymer was synthesized using 3-(trimethoxysilyl) propyl amine (TMSPA) as precursor and hydroxy-terminated polydimethylsiloxane (OH-PDMS) by sol-gel technology and coated on fused-silica fiber. The synthesis was designed in a way to impart polar moiety into the coating network. The scanning electron microscopy (SEM) images of this new coating showed the homogeneity and the porous surface structure of the film. The efficiency of new coating was investigated for headspace solid-phase microextraction (SPME) of some environmentally important chlorophenols from aqueous samples followed by gas chromatography-mass spectrometry (GC-MS) analysis. Effect of different parameters influencing the extraction efficiency such as extraction temperature, extraction time, ionic strength and pH was investigated and optimized. In order to improve the separation efficiency of phenolic compounds on chromatography column all the analytes were derivatized prior to extraction using acetic anhydride at alkaline condition. The detection limits of the method under optimized conditions were in the range of 0.02-0.05 ng mL{sup -1}. The relative standard deviations (R.S.D.) (n = 6) at a concentration level of 0.5 ng mL{sup -1} were obtained between 6.8 and 10%. The calibration curves of chlorophenols showed linearity in the range of 0.5-200 ng mL{sup -1}. The proposed method was successfully applied to the extraction from spiked tap water samples and relative recoveries were higher than 90% for all the analytes.

An Investigation of Self-reported Health-related Productivity Loss in Office Workers and Associations With Individual and Work-related Factors Using an Employer's Perspective.

Science.gov (United States)

Pereira, Michelle Jessica; Johnston, Venerina; Straker, Leon Melville; Sjøgaard, Gisela; Melloh, Markus; O'Leary, Shaun Patrick; Comans, Tracy Anne

2017-07-01

Office workers have a high prevalence of musculoskeletal conditions. This can be a significant economic burden due to health-related productivity loss. Individual and work-related factors related to office worker health-related productivity were investigated. A survey including the Health and Work Performance Questionnaire, which estimated productivity loss, also recorded individual and work-related factors with potential associations with health-related productivity. Muscle function and workstation ergonomics were examined through physical assessments. Linear models investigated the relationships between these factors and health-related productivity. Significant factors identified were occupational category (0.001 productivity loss was greater in office workers working as managers, with lower job satisfaction and psychological wellbeing, and those with musculoskeletal pain. Office worker health-related productivity loss is represented by a combination of both individual and work-related factors.

Photoelectron and UV absorption spectroscopy for determination of electronic configurations of negative molecular ions: Chlorophenols

International Nuclear Information System (INIS)

Tseplin, E.E.; Tseplina, S.N.; Tuimedov, G.M.; Khvostenko, O.G.

2009-01-01

The photoelectron and UV absorption spectra of p-, m-, and o-chlorophenols in the gas phase have been obtained. On the basis of DFT B3LYP/6-311++G(d, p) calculations, the photoelectron bands have been assigned to occupied molecular orbitals. From the TDDFT B3LYP/6-311++G(d, p) calculation results, the UV absorption bands have been assigned to excited singlet states of the molecules under investigation. For each excited state a dominant transition was found. It has been shown that the energies of these singlet transitions correlate with the energy differences between the ground-state molecular orbitals participating in them. Using the UV spectra interpretation, the electronic states of molecular anions detected earlier for the same compounds by means of the resonant electron capture mass-spectrometry have been determined.

An Investigation of Self-reported Health-related Productivity Loss in Office Workers and Associations With Individual and Work-related Factors Using an Employer's Perspective

DEFF Research Database (Denmark)

Pereira, Michelle Jessica; Johnston, Venerina; Straker, Leon Melville

2017-01-01

the Health and Work Performance Questionnaire, which estimated productivity loss, also recorded individual and work-related factors with potential associations with health-related productivity. Muscle function and workstation ergonomics were examined through physical assessments. Linear models investigated...... in office workers working as managers, with lower job satisfaction and psychological wellbeing, and those with musculoskeletal pain. CONCLUSION: Office worker health-related productivity loss is represented by a combination of both individual and work-related factors.......OBJECTIVE: Office workers have a high prevalence of musculoskeletal conditions. This can be a significant economic burden due to health-related productivity loss. Individual and work-related factors related to office worker health-related productivity were investigated. METHODS: A survey including...

Preferred 11 different job rotation types in automotive company and their effects on productivity, quality and musculoskeletal disorders: comparison between subjective and actual scores by workers' age.

Science.gov (United States)

Jeon, In Sik; Jeong, Byung Yong; Jeong, Ji Hyun

2016-10-01

This study investigates workers' favoured rotation types by their age and compares means between subjective and actual scores on productivity, quality and musculoskeletal disorders (MSDs). The subjects of research were 422 assembly line units in Hyundai Motor Company. The survey of 422 units focused on the workers' preference for 11 different rotation types and subjective scores for each type's perceived benefits, both by the workers' age. Then, actual scores on production-related indices were traced over a five-year period. The results suggest that different rotation types lead to different results in productivity, product quality and MSDs. Workers tend to perceive job rotation as a helpful method to enhance satisfaction, productivity and product quality more so than the actual production data suggests. Job rotation was especially effective in preventing MSDs for workers aged under 45, while its effects were not clear for the workers aged 45 years or older. Practitioner's Summary: This research presents appropriate rotation type for different age groups. Taking workers' age into account, administrators can use the paper's outcomes to select and implement the suitable rotation type to attain specific goals such as enhancing productivity, improving product quality or reducing MSDs.

Peripheral blood values in workers occupied in the petrochemical production

Directory of Open Access Journals (Sweden)

G.G. Badamshina

2015-06-01

Full Text Available The study is devoted to solution of the problems of the early changes detection in a body on the stages, when only the conditions for the pathology formation were created. The analysis of peripheral blood in the workers, occupied in petrochemical production, allowed us to diagnose the changes that testify the body defenses’ decrease that occurs under exposure to chemicals. It is shown that in the initial period of exposure to harmful substances the body's reaction to a toxic irritant contain both specific and nonspecific components. The first working years is characterized by the reduction of the number of red blood cells and hemoglobin. Over the next years the gradual stabilization is presented, and then the moderate and persistent increase in red blood indices occur, what indicate on the adaptive nature of the condition. It was established, that in dependence of the tropism, mechanism of action and the hazard class of hazardous substances, the diverse hematological changes in the body workers are revealed.

75 FR 453 - FLSMidth, Inc., Cement Division, Product Engineering, Including On-Site Leased Workers of Aerotek...

Science.gov (United States)

2010-01-05

... DEPARTMENT OF LABOR Employment and Training Administration [TA-W-72,048] FLSMidth, Inc., Cement..., Inc., Cement Division, Product Engineering, including on-site leased workers of Aerotek Contract.... were also employed on-site at FLSmidth, Inc., Cement Division, Product Engineering, Bethlehem...

SUPPLY-SIDE EFFECT OF HEALTH CARE FACILITIES ON PRODUCTIVITY AMONG THE FEMALE WORKER IN THE READYMADE GERMENT SECTOR

Directory of Open Access Journals (Sweden)

Md Aminul Haque

2008-01-01

Full Text Available This study was conducted in 4 selected garment factories within Dhaka city. The objectives of this study were to find out health care access (Supply-side effect in the garments factory for the women workers and their relation to the productivity. A total of 300 women garment workers were included in this study. Most (60.0% of the respondents were adolescents, unmarried and having only primary level education (5 years of school education. Their average take home monthly salary was 1791.7 taka which was spent mostly on food. They passed a tight work schedule from 6 AM to 11.30 PM without any rest. Hundred percent of female workers had no previous idea about garments nor had any formal training, but they produced on an average 1016 garment pieces a day. They did not get any vaccine, health education or health related knowledge from the garments factory. There was no provision of health care centre or doctor, treatment for fire burn (other than gas, medicine and support in chronic, severe illness for themselves or their family members. More than half (63.0% of the respondents mentioned about loss of time due to illness. There was a strong correlation (r=0.858 between sickness and production loss, between hour loss and production loss (r=0.9283, between production loss and percentage loss (r=0.871. Though there was loss due to illness, no health access or facility for women workers in the garments factory was available. To overcome the situation and improve the productivity, owners have to provide health access and women workers have to come forward for their rights. Ibrahim Med. Coll. J. 2008; 2(1: 4-8

A field-practical assay for rapid detection of chlorophenols

Energy Technology Data Exchange (ETDEWEB)

Washburn, K.S.; Phillips, T.D. [Texas A and M Univ., College Station, TX (United States). Dept. of Veterinary Anatomy and Public Health

1994-12-31

Water-solvated chlorophenols (CPs) are environmental toxins associated with wood preservation and pesticide synthesis and usage. Their toxicity and association with dioxin-contaminated wastes are well-documented, as is their stability in most environmental settings. Several analytical procedures, mainly HPLC and GC/MS, are currently used to detect and quantify CPs, but these procedures are based on expensive equipment and technical expertise in a laboratory setting. The authors have developed an inexpensive, field-practical method for CPs, utilizing a small, packed glass minicolumn and derivatization of target CP molecules with dansyl chloride (5-dimethylaminonaphthalene-1sulfonyl chloride), or DsCl. A nonfluorescent borosilicate glass tube was used to house an array of inorganic sorbent materials, including preparative layers and a reactive neutral alumina interface separated by sand. DsCl is a substituted naphthalene with a conjugated X system that is responsible for its fluorescent complexation. Amines that reacted with DsCl were removed with a small amount of phyllosilicate clay to avoid interference. A neutral alumina/sand interface was used to strongly bind and immobilize the dansylated CPs. Activities greater than 3.0 for the alumina were avoided to prevent loss of selectivity, intensity and color of the fluorescence at the reactive interface. The results indicated that this assay was capable of rapidly screening potable water samples and detecting CP contamination at very low concentrations (i.e., 1.0 ppb of pentachlorophenol in drinking water).

Are part-time workers less productive and underpaid?

OpenAIRE

Garnero, Andrea

2016-01-01

About one in five workers across OECD countries is employed part-time, and the share has been steadily increasing since the beginning of the economic and financial crisis in 2007. Part-time options play an important economic role by providing more flexible working arrangements for both workers and firms. Part-time employment has also contributed substantially to increasing the employment rate, especially among women. However, part-time work comes at a cost of lower wages for workers, mainly b...

Reliability of eye lens dosimetry in workers of a positron emission tomography radiopharmaceutical production facility

International Nuclear Information System (INIS)

Silva, Teógenes A. da; Guimarães, Margarete C.; Meireles, Leonardo S.; Teles, Luciana L.D.; Lacerda, Marco Aurélio S.

2016-01-01

A new regulatory statement was issued concerning the eye lens radiation protection of persons in planned exposures. A debate was raised on the adequacy of the dosimetric quantity and on its method of measurement. The aim of this work was to establish the individual monitoring procedure with the EYE-D™ holder and a MCP-N LiF:Mg,Cu,P thermoluminescent chip detector for measuring the personal dose equivalent H_p(3) in workers of a Positron Emission Tomography Radiopharmaceutical Production Facility. - Highlights: • New regulatory statement was issued concerning eye lens radiation protection. • The calibration procedure of dosimeters for measuring H_p(3) was studied on a slab and cylindrical phantoms. • H_p(3) measurements in workers in a radiopharmaceutical production facility were done.

Rigidity of Nominal Wages of Non-Production Workers in Industrial Sector

Directory of Open Access Journals (Sweden)

Bambang Sulistiyono

2016-06-01

Full Text Available Excess supply of labor leads to low the levels of nominal wages received by workers. The amount of minimum wage rate exceeds the market wage rate. The determination of minimum wage is a factor manifested in the institutional and regulatory Provincial Minimum Wage or a District Minimum Wage. Unfortunately, it has made nominal wages  difficult to drop below the minimum wage level. High or low level of nominal wages are associated with worker productivity. Further, nominal wages are rigid to go down. If they have increased, they can not be dropped in the future even though the company's performance is declined. Knowing that condition, in designing the remuneration system, an employer should pay attention to the rigidity of nominal wages, so that when  company's performance declines, the company will not be interfered because of the wages burden.  Furthermore, unions and government should consider the rigidity impact of nominal wages that go down. Thus, when macroeconomic conditions deteriorate and company's performance drops, the company will not go bankrupt due to high labor costs. If the company goes bankrupt, the workers will loose their jobs as a result of employment termination, while the government will face the unemployment problem. 

Effects of Heat Stress on Construction Labor Productivity in Hong Kong: A Case Study of Rebar Workers.

Science.gov (United States)

Yi, Wen; Chan, Albert P C

2017-09-12

Global warming is bringing more frequent and severe heat waves, and the result will be serious for vulnerable populations such as construction workers. Excessive heat stress has profound effects on physiological responses, which cause occupational injuries, fatalities and low productivity. Construction workers are particularly affected by heat stress, because of the body heat production caused by physically demanding tasks, and hot and humid working conditions. Field studies were conducted between August and September 2016 at two construction training grounds in Hong Kong. Onsite wet-bulb globe temperature (WBGT), workers' heart rate (HR), and labor productivity were measured and monitored. Based on the 378 data sets of synchronized environmental, physiological, construction labor productivity (CLP), and personal variables, a CLP-heat stress model was established. It was found that WBGT, percentage of maximum HR, age, work duration, and alcohol drinking habits were determining factors for predicting the CLP (adjusted R ² = 0.68, p stress reduces CLP, with the percentage of direct work time decreasing by 0.33% when the WBGT increased by 1 °C. The findings in this study extend the existing practice notes by providing scientific data that may be of benefit to the industry in producing solid guidelines for working in hot weather.

Mobile Applications for Knowledge Workers and Field Workers

Directory of Open Access Journals (Sweden)

Stefan Stieglitz

2015-01-01

Full Text Available In recent years, the diffusion of mobile applications (mobile apps has risen significantly. Nowadays, mobile business apps are strongly emerging in business, enhancing productivity and employees’ satisfaction, whilst the usage of customized individual enterprise apps is still an exception. Standardized business apps enable basic functionalities, for example, mobile data storage and exchange (e.g., Dropbox, communication (e.g., Skype, and other routine processes, which support mobile workers. In addition, mobile apps can, for example, increase the flexibility of mobile workers by easing the access to firm’s information from outside the enterprise and by enabling ubiquitous collaboration. Hence, mobile apps can generate competitive advantages and can increase work efficiency on a broad scale. But mobile workers form no coherent group. Our research reveals, based on two case studies, that they can be clustered into two groups: knowledge workers and field workers. Knowledge workers and field workers fulfill different tasks and work in different environments. Hence, they have different requirements for mobile support. In this paper we conclude that standardized mobile business apps cannot meet the different requirements of various groups of mobile workers. Task- and firm-specific (individualized requirements determine the specification, implementation, and application of mobile apps.

Monitoring of exposure to selected metals in workers of a ferroalloy production plant using NAA and PIXE

International Nuclear Information System (INIS)

Kucera, J.; Havranek, V.; Hnatowicz, V.; Bencko, V.; Fabianova, E.; Sysalova, J.

1998-01-01

Advantages and pitfalls of direct and biological monitoring of occupational exposure are briefly mentioned and a project aimed at evaluating exposure to chromium (and possibly manganese) in workers of a ferro-alloy production plant using both the above approaches is outlined. Facilities for NAA and PIXE at the Nuclear Physics Institute at Rez to be used in the project are described. Results of quality assurance of INAA method for analysis of workplace air born particulate matter and blood sampling are presented. Results from previous work relating to this Co-ordinated Research Programme - studying exposure of workers of a vanadium pentoxide production plant are also briefly reviewed. (author)

[Respiratory diseases in metallurgy production workers].

Science.gov (United States)

Shliapnikov, D M; Vlasova, E M; Ponomareva, T A

2012-01-01

The authors identified features of respiratory diseases in workers of various metallurgy workshops. Cause-effect relationships are defined between occupational risk factors and respiratory diseases, with determining the affection level.

Heuristic for Task-Worker Assignment with Varying Learning Slopes

Directory of Open Access Journals (Sweden)

Wipawee Tharmmaphornphilas

2010-04-01

Full Text Available Fashion industry has variety products, so the multi-skilled workers are required to improve flexibility in production and assignment. Generally the supervisor will assign task to the workers based on skill and skill levels of worker. Since in fashion industry new product styles are launched more frequently and the order size tends to be smaller, the workers always learn when the raw material and the production process changes. Consequently they require less time to produce the succeeding units of a task based on their learning ability. Since the workers have both experience and inexperience workers, so each worker has different skill level and learning ability. Consequently, the assignment which assumed constant skill level is not proper to use. This paper proposes a task-worker assignment considering worker skill levels and learning abilities. Processing time of each worker changes along production period due to a worker learning ability. We focus on a task-worker assignment in a fashion industry where tasks are ordered in series; the number of tasks is greater than the number of workers. Therefore, workers can perform multiple assignments followed the precedence restriction as an assembly line balancing problem. The problem is formulated in an integer linear programming model with objective to minimize makespan. A heuristic is proposed to determine the lower bound (LB and the upper bound (UB of the problem and the best assignment is determined. The performance of the heuristic method is tested by comparing quality of solution and computational time to optimal solutions.

Enhanced chlorophenol sorption of soils by rice-straw-ash amendment

International Nuclear Information System (INIS)

Liu, Jen-Chyi; Tzou, Yu-Min; Lu, Yi-Hsien; Wu, Jeng-Tzung; Cheng, Mei-Ping; Wang, Shan-Li

2010-01-01

Rice-straw burning is a common post-harvest practice on rice paddy land, which results in the accumulation of rice-straw ash (RSA) in paddy soil. Because the occurrence of RSA in soil may affect the fate and transport of contaminants, this study investigated the sorption of 3-chlorophenol (3-CP) on RSA and RSA amended soils to evaluate the sorptive properties of RSA in soils. The results showed that the sorption of 3-CP to RSA proceeds through a surface reaction rather than through partitioning and that the neutral form of 3-CP is preferentially sorbed to the surface when compared to the deprotonated anionic form of 3-CP. The addition of RSA to the soils enhanced the overall 3-CP sorption, indicating that RSA amendment may be applied to retard the movement of 3-CP in contaminated soils. As the RSA content in the soils was increased from 0% to 2%, the Langmuir sorption maximum of the soils increased from 18-80 to 256-274 mg kg -1 . Thus, RSA contributed more to the total sorption of the soils than other major components in the soils. Nonetheless, the 3-CP sorption of the soils containing RSA was less than the combination of pure RSA and the soils, thereby indicating that the 3-CP sorption of RSA was suppressed. This may be attributed to the competition of organic matter or other soil components for the surface binding sites of RSA.

Catalytic wet air oxidation of chlorophenols over supported ruthenium catalysts

International Nuclear Information System (INIS)

Li Ning; Descorme, Claude; Besson, Michele

2007-01-01

A series of noble metal (Pt, Pd, Ru) loaded zirconia catalysts were evaluated in the catalytic wet air oxidation (CWAO) of mono-chlorophenols (2-CP, 3-CP, 4-CP) under relatively mild reaction conditions. Among the investigated noble metals, Ru appeared to be the best to promote the CWAO of CPs as far as incipient-wetness impregnation was used to prepare all the catalysts. The position of the chlorine substitution on the aromatic ring was also shown to have a significant effect on the CP reactivity in the CWAO over 3 wt.% Ru/ZrO 2 . 2-CP was relatively easier to degradate compared to 3-CP and 4-CP. One reason could be the higher adsorption of 2-CP on the catalyst surface. Further investigations suggested that 3 wt.% Ru/ZrO 2 is a very efficient catalyst in the CWAO of 2-CP as far as high 2-CP conversion and TOC abatement could still be reached at even lower temperature (393 K) and lower total pressure (3 MPa). Additionally, the conversion of 2-CP was demonstrated to increase with the initial pH of the 2-CP solution. The dechlorination reaction is promoted at higher pH. In all cases, the adsorption of the reactants and the reaction intermediates was shown to play a major role. All parameters that would control the molecule speciation in solution or the catalyst surface properties would have a key effect

Development of an energy-saving anaerobic hybrid membrane bioreactors for 2-chlorophenol-contained wastewater treatment.

Science.gov (United States)

Wang, Yun-Kun; Pan, Xin-Rong; Sheng, Guo-Ping; Li, Wen-Wei; Shi, Bing-Jing; Yu, Han-Qing

2015-12-01

A novel energy-saving anaerobic hybrid membrane bioreactor (AnHMBR) with mesh filter, which takes advantage of anaerobic membrane bioreactor and fixed-bed biofilm reactor, is developed for low-strength 2-chlorophenol (2-CP)-contained wastewater treatment. In this system, the anaerobic membrane bioreactor is stuffed with granular activated carbon to construct an anaerobic hybrid fixed-bed biofilm membrane bioreactor. The effluent turbidity from the AnHMBR system was low during most of the operation period, and the chemical oxygen demand and 2-CP removal efficiencies averaged 82.3% and 92.6%, respectively. Furthermore, a low membrane fouling rate was achieved during the operation. During the AnHMBR operation, the only energy consumption was for feed pump. And a low energy demand of 0.0045-0.0063kWhm(-3) was estimated under the current operation conditions. All these results demonstrated that this novel AnHMBR is a sustainable technology for treating 2-CP-contained wastewater. Copyright © 2014 Elsevier Ltd. All rights reserved.

The mortality and cancer morbidity experience of workers at the Springfields uranium production facility, 1946-95

International Nuclear Information System (INIS)

McGeoghegan, D.; Binks, K.

2000-01-01

The results presented here are from the follow-up of the cohort of workers ever employed at the Springfields site of British Nuclear Fuels plc (BNFL) between 1946 and 1995. The main activity of the site is uranium fuel fabrication and uranium hexafluoride production. The study cohort consists of 19 454 current and former employees, 13 960 of which were classified as radiation workers, and contains 479 146 person-years of follow-up. The mean follow-up period is 24.6 years. To the end of 1995 there have been 4832 deaths recorded for this cohort, 3476 of which were amongst radiation workers and 1356 were amongst non-radiation workers. The standardised mortality ratios (SMRs) for all causes were 84 and 98 for radiation workers and non-radiation workers respectively. For all cancers the SMRs were 86 and 96 respectively. For cancer morbidity the standardised registration ratios (SRRs) for all cancers were 81 and 81 respectively. Significant associations were noted for both mortality and morbidity due to Hodgkin's disease and cumulative external dose. A strong association was also noted for morbidity, but not mortality, due to non-Hodgkin's lymphoma. These associations, however, are unlikely to be causal. The excess relative risk estimates for cancer other than leukaemia and for leukaemia excluding chronic lymphatic leukaemia are consistent with other occupationally exposed cohorts and estimates from the high-dose studies. (author)

Enhanced degradation of p-chlorophenol in a novel pulsed high voltage discharge reactor.

Science.gov (United States)

Bian, Wenjuan; Ying, Xiangli; Shi, Junwen

2009-03-15

The yields of active specie such as ozone, hydrogen peroxide and hydroxyl radical were all enhanced in a novel discharge reactor. In the reactor, the original formation rate of hydroxyl radical was 2.27 x 10(-7) mol L(-1)s(-1), which was about three times than that in the contrast reactor. Ozone was formed in gas-phase and was transferred into the liquid. The characteristic of mass transfer was better in the novel reactor than that in the contrast reactor, which caused much higher ozone concentration in liquid. The dissociation of hydrogen peroxide was more evident in the former, which promoted the formations of hydroxyl radical. The p-chlorophenol (4-CP) degradation was also enhanced. Most of the ozone transferred into the liquid and hydrogen peroxide generated by discharge could be utilized by the degradation process of 4-CP. About 97% 4-CP was removed in 36 min discharge in the novel reactor. Organic acids such as formic, acetic, oxalic, propanoic and maleic acid were generated and free chloride ions were released in the degradation process. With the formation of organic acid, the pH was decreased and the conductivity was increased.

Enhanced degradation of p-chlorophenol in a novel pulsed high voltage discharge reactor

Energy Technology Data Exchange (ETDEWEB)

Bian Wenjuan [School of Chemistry and Chemical Engineering, Soochow University, Suzhou 215123 (China)], E-mail: bwenjuan@suda.edu.cn; Ying Xiangli; Shi Junwen [School of Chemistry and Chemical Engineering, Soochow University, Suzhou 215123 (China)

2009-03-15

The yields of active specie such as ozone, hydrogen peroxide and hydroxyl radical were all enhanced in a novel discharge reactor. In the reactor, the original formation rate of hydroxyl radical was 2.27 x 10{sup -7} mol L{sup -1} s{sup -1}, which was about three times than that in the contrast reactor. Ozone was formed in gas-phase and was transferred into the liquid. The characteristic of mass transfer was better in the novel reactor than that in the contrast reactor, which caused much higher ozone concentration in liquid. The dissociation of hydrogen peroxide was more evident in the former, which promoted the formations of hydroxyl radical. The p-chlorophenol (4-CP) degradation was also enhanced. Most of the ozone transferred into the liquid and hydrogen peroxide generated by discharge could be utilized by the degradation process of 4-CP. About 97% 4-CP was removed in 36 min discharge in the novel reactor. Organic acids such as formic, acetic, oxalic, propanoic and maleic acid were generated and free chloride ions were released in the degradation process. With the formation of organic acid, the pH was decreased and the conductivity was increased.

Enhanced degradation of p-chlorophenol in a novel pulsed high voltage discharge reactor

International Nuclear Information System (INIS)

Bian Wenjuan; Ying Xiangli; Shi Junwen

2009-01-01

The yields of active specie such as ozone, hydrogen peroxide and hydroxyl radical were all enhanced in a novel discharge reactor. In the reactor, the original formation rate of hydroxyl radical was 2.27 x 10 -7 mol L -1 s -1 , which was about three times than that in the contrast reactor. Ozone was formed in gas-phase and was transferred into the liquid. The characteristic of mass transfer was better in the novel reactor than that in the contrast reactor, which caused much higher ozone concentration in liquid. The dissociation of hydrogen peroxide was more evident in the former, which promoted the formations of hydroxyl radical. The p-chlorophenol (4-CP) degradation was also enhanced. Most of the ozone transferred into the liquid and hydrogen peroxide generated by discharge could be utilized by the degradation process of 4-CP. About 97% 4-CP was removed in 36 min discharge in the novel reactor. Organic acids such as formic, acetic, oxalic, propanoic and maleic acid were generated and free chloride ions were released in the degradation process. With the formation of organic acid, the pH was decreased and the conductivity was increased

Founding weaver ant queens (Oecophylla longinoda) increase production and nanitic worker size when adopting non-nestmate pupae

DEFF Research Database (Denmark)

Ouagoussounon, Issa; Offenberg, Joachim; Sinzogan, Antonio

2015-01-01

Weaver ants (Oecophylla longinoda Latreille) are used commercially to control pest insects and for protein production. In this respect fast colony growth is desirable for managed colonies. Transplantation of non-nestmate pupae to incipient colonies has been shown to boost colony growth. Our...... of 300 pupae increased total colony size more than 10-fold whereas 100 pupae increased the size 5.6 fold, compared to control. This increase was due not only to the individuals added in the form of pupae but also to an increased per capita brood production by the resident queen, triggered by the adopted...... objectives were to find the maximum number of pupae a founding queen can handle, and to measure the associated colony growth. Secondly, we tested if transplantation of pupae led to production of larger nanitic workers (defined as unusually small worker ants produced by founding queens in their first batch...

Advanced worker protection system

Energy Technology Data Exchange (ETDEWEB)

Caldwell, B.; Duncan, P.; Myers, J. [Oceaneering Space Systems, Houston, TX (United States)

1995-10-01

The Department of Energy (DOE) is in the process of defining the magnitude and diversity of Decontamination and Decommissioning (D&D) obligations at its numerous sites. The DOE believes that existing technologies are inadequate to solve many challenging problems such as how to decontaminate structures and equipment cost effectively, what to do with materials and wastes generated, and how to adequately protect workers and the environment. Preliminary estimates show a tremendous need for effective use of resources over a relatively long period (over 30 years). Several technologies are being investigated which can potentially reduce D&D costs while providing appropriate protection to DOE workers. The DOE recognizes that traditional methods used by the EPA in hazardous waste site clean up activities are insufficient to provide the needed protection and worker productivity demanded by DOE D&D programs. As a consequence, new clothing and equipment which can adequately protect workers while providing increases in worker productivity are being sought for implementation at DOE sites. This project describes the development of an Advanced Worker Protection System (AWPS) which will include a life-support backpack with liquid air for cooling and as a supply of breathing gas, protective clothing, respirators, communications, and support equipment.

Advanced worker protection system

International Nuclear Information System (INIS)

Caldwell, B.; Duncan, P.; Myers, J.

1995-01-01

The Department of Energy (DOE) is in the process of defining the magnitude and diversity of Decontamination and Decommissioning (D ampersand D) obligations at its numerous sites. The DOE believes that existing technologies are inadequate to solve many challenging problems such as how to decontaminate structures and equipment cost effectively, what to do with materials and wastes generated, and how to adequately protect workers and the environment. Preliminary estimates show a tremendous need for effective use of resources over a relatively long period (over 30 years). Several technologies are being investigated which can potentially reduce D ampersand D costs while providing appropriate protection to DOE workers. The DOE recognizes that traditional methods used by the EPA in hazardous waste site clean up activities are insufficient to provide the needed protection and worker productivity demanded by DOE D ampersand D programs. As a consequence, new clothing and equipment which can adequately protect workers while providing increases in worker productivity are being sought for implementation at DOE sites. This project describes the development of an Advanced Worker Protection System (AWPS) which will include a life-support backpack with liquid air for cooling and as a supply of breathing gas, protective clothing, respirators, communications, and support equipment

Worker Training: Competing in the New International Economy.

Science.gov (United States)

Congress of the U.S., Washington, DC. Office of Technology Assessment.

Workers' skills are critical to U.S. industrial productivity and competitiveness and to maintaining living standards. Training is the key. Good training pays--for workers whose skills are upgraded, for companies seeking a competitive edge, and for the nation in overall productivity. However, workers in other countries are better trained than most…

PHYSIOLOGICAL ASSESSMENT OF THE FUNCTIONAL STATE OF ORGANISM OF WORKERS OF THE ROLLING PRODUCTION IN THE COURSE OF EMPLOYMENT

Directory of Open Access Journals (Sweden)

Тулеген Нургалиевич Хамитов

2018-03-01

Full Text Available The purpose of the work – the work is devoted to the physiological assessment of the functional state of organism of workers of the rolling production in the course of employment, depending on occupational category. Methods. Objects of research: performance of rolling production of JSC «Arcelor Mittal – Temirtau». Research methods: physiological and statistical. Results. The results of the study allowed to conclude that the negative effects of rolling operations on the body of the workers, thus, despite indications of adaptation of the organism to the production activity, the individual functional systems, a decrease in reserve capacity. The severity level of functional tension of organism depends on the duration of contact with harmful factors and the degree of direct participation in the management and maintenance of the main technological process of the rolling production.

A direct comparison amongst different technologies (aerobic granular sludge, SBR and MBR) for the treatment of wastewater contaminated by 4-chlorophenol

International Nuclear Information System (INIS)

Carucci, Alessandra; Milia, Stefano; Cappai, Giovanna; Muntoni, Aldo

2010-01-01

Environmental concern on chlorinated phenols is rising due to their extreme toxicity even at low concentrations and their persistency in water and soils. Since the high amount of published data often lacks in terms of uniformity, direct comparisons amongst different treatment technologies are very difficult, or even impossible. In this study, granular sludge developed in an acetate-fed Granular sludge Sequencing Batch Reactor (GSBR) was used for the aerobic degradation of low chlorinated 4-chlorophenol (4CP), with readily biodegradable sodium acetate (NaAc) as growth substrate. A conventional Sequencing Batch Reactor (SBR) and a Membrane BioReactor (MBR) were operated in parallel under the same 4CP influent concentrations and/or 4CP volumetric organic loading rates as the GSBR, in order to carry out a direct comparison in terms of 4CP removal efficiencies and specific removal rates, effluent quality, waste sludge production, system simplicity, land area requirement, start-up times, NaAc dosage as growth substrate and maximum applied 4CP volumetric organic loading rate. A decision matrix was built to define the best technology to suit different scenarios: the GSBR was proved to be the most suitable technology when system simplicity, low land area requirement and short start-up times were considered as critical parameters for decision making.

Education, Training and Productivity: A Study of Skilled Workers in Two Factories in South India.

Science.gov (United States)

Fuller, William P.

To examine the contributions of specific kinds of occupational training to the productivity of workers with different levels of formal schooling, interviews were used to collect data on general education, trade training, work experience, environmental characteristics, and general ability from 598 turners, millers, and grinders in two factories in…

The effect of physical fitness and physical exercise training on work productivity among health care workers

DEFF Research Database (Denmark)

Kongstad, Malte Bue; Christensen, Jeanette Reffstrup; Sjøgaard, Gisela

THE EFFECT OF PHYSICAL FITNESS AND PHYSICAL EXERCISE TRAINING ON WORK PRODUCTIVITY AMONG HEALTH CARE WORKERS Kongstad, M. 1, Sjøgaard, G. 1, Søgaard, K. 1, Christensen, JR. 1 1: SDU (Odense, Denmark) Introduction Workplace health promotion involving physical exercise training may negate lifestyle......-sectional sample of health care workers, as well as 2) the change in WP in relation to changes in the before mentioned physiological variables following workplace health promotion. Methods Secondary analyses were performed on a subsample of 139 Danish, female health care workers participating in a cluster...... randomized controlled trial. WP was assessed as a summed score using selected, validated questions from three questionnaires (Health and Work Performance Questionnaire, Work Ability, and Quantity and Quality Method). Height and weight were measured to calculate BMI, CRF was measured using a bicycle ergometer...

An adsorption diffusion model for removal of para-chlorophenol by activated carbon derived from bituminous coal.

Science.gov (United States)

Sze, M F F; McKay, G

2010-05-01

Batch adsorption experiments were carried out to study the adsorptive removal and diffusion mechanism of para-chlorophenol (p-CP) onto Calgon Filtrasorb 400 (F400) activated carbon. The external mass transfer resistance is negligible in the adsorption process carried out under different conditions in batch operation. Intraparticle diffusion model plots were used to correlate the batch p-CP adsorption data; three distinct linear sections were obtained for every batch operation. The textural properties of F400 activated carbon showed that it has a large portion of supermicropores, which is comparable to the size of the p-CP molecules. Due to the stronger interactions between p-CP molecules and F400 micropores, p-CP molecules predominantly diffused and occupied active sites in micropore region by hopping mechanism, and eventually followed by a slow filling of mesopores and micropores. This hypothesis is proven by the excellent agreement of the intraparticle diffusion model plots and the textural properties of F400 activated carbon. Copyright 2009 Elsevier Ltd. All rights reserved.

Catalysts of worker-to-worker violence and incivility in hospitals.

Science.gov (United States)

Hamblin, Lydia E; Essenmacher, Lynnette; Upfal, Mark J; Russell, Jim; Luborsky, Mark; Ager, Joel; Arnetz, Judith E

2015-09-01

To identify common catalysts of worker-to-worker violence and incivility in hospital settings. Worker-to-worker violence and incivility are prevalent forms of mistreatment in healthcare workplaces. These are forms of counterproductive work behaviour that can lead to negative outcomes for employees, patients and the organisation overall. Identifying the factors that lead to co-worker mistreatment is a critical first step in the development of interventions targeting these behaviours. Retrospective descriptive study. Qualitative content analysis was conducted on the total sample (n = 141) of employee incident reports of worker-to-worker violence and incivility that were documented in 2011 at a large American hospital system. More than 50% of the incidents involved nurses, and the majority of incidents did not involve physical violence. Two primary themes emerged from the analysis: Work Behaviour and Work Organisation. Incidents in the Work Behaviour category were often sparked by unprofessional behaviour, disagreement over responsibilities for work tasks or methods of patient care, and dissatisfaction with a co-worker's performance. Incidents in the Work Organisation category involved conflicts or aggression arising from failure to following protocol, patient assignments, limited resources and high workload. Incidents of worker-to-worker violence and incivility stemmed from dissatisfaction with employee behaviour or from organisational practices or work constraints. These incident descriptions reflect worker dissatisfaction and frustration, resulting from poor communication and collaboration between employees, all of which threaten work productivity. Violence and incivility between hospital employees can contribute to turnover of top performers, hinder effective teamwork and jeopardise the quality of patient care. Identification of common catalysts for worker-to-worker violence and incivility informs the development of mistreatment prevention programmes that can be

Seeing and Hearing: Examining Production Workers' Literacy and Numeracy Practices in a Context of Crisis

Science.gov (United States)

Brown, Tony; Yasukawa, Keiko; Black, Stephen

2014-01-01

A policy consensus has emerged in Australia that there is a workforce literacy and numeracy crisis, similar to many other Organisation for Economic Cooperation and Development countries. The study informing this paper examined this framing of crisis by interviewing and observing production workers in three manufacturing companies. Each company was…

Studying the effectiveness of re-hydration on productivity in a sugar beet workers among farmers in West Azarbaijan city

Directory of Open Access Journals (Sweden)

F. Golbabaei

2014-09-01

Full Text Available Introduction: Heat-related illnesses are major causes of morbidity in the world. Workers who are exposed to extreme heat are not be able to activate their compensatory mechanisms and their health will consequently be at risk. Heat stress due to its impact on work performance increases the likelihood of worker disease and injuries and it also affect productivity. During sugar beet harvest, farmers from about 8 am to 4 pm, are exposed to sunlight and excessive heat. Therefore, preventive measures are essential in order to protect the health of farmers and improve productivity. The aim of this project as to study the effectiveness of the rehydration to reduce heat stress and increasing productivity during sugar beet harvest, conducted in 2012.   .Material and Method: in this project, 20 farmers from sugar beet farmers were studied during summer season, from 8 am to 4 pm in West Azarbaijan- Boukan city where the average temperature and relative humidity were 29.85 0C and 41%, respectively during sugar beet harvest. Selection criteria were defined as working more than 50% of the day’s working schedule and to have worked for at least 10 days of the follow-up period. Individual characteristics and water consumption rate during the work shift and also Production output data by farmers were recorded at the end of the working day. Environmental parameters using a portable monitoring device was measured and recorded and finally, the collected data was used for analysis using spss software version 20.   .Results: WBGT-TWA index for four the period of the time from morning to afternoon obtained 27.39 0C, as it was greater than the allowable thresholds. Ten workers receive 6-7 L of liquid and harvest production was significantly increased among those who are better hydrated (P=0.005, from 5 to 7 tons of harvest sugar beet per any worker per day, against lower 5 tons for farmers without drinking enough water.  . Conclusion: Farmers productivity can be

Founding weaver ant queens (Oecophylla longinoda) increase production and nanitic worker size when adopting non-nestmate pupae.

Science.gov (United States)

Ouagoussounon, Issa; Offenberg, Joachim; Sinzogan, Antonio; Adandonon, Appolinaire; Kossou, Dansou; Vayssières, Jean-François

2015-01-01

Weaver ants (Oecophylla longinoda Latreille) are used commercially to control pest insects and for protein production. In this respect fast colony growth is desirable for managed colonies. Transplantation of non-nestmate pupae to incipient colonies has been shown to boost colony growth. Our objectives were to find the maximum number of pupae a founding queen can handle, and to measure the associated colony growth. Secondly, we tested if transplantation of pupae led to production of larger nanitic workers (defined as unusually small worker ants produced by founding queens in their first batch of offspring). Forty-five fertilized queens were divided into three treatments: 0 (control), 100 or 300 non-nestmate pupae transplanted to each colony. Pupae transplantation resulted in highly increased growth rates, as pupae were readily adopted by the queens and showed high proportions of surviving (mean = 76%). However, survival was significantly higher when 100 pupae were transplanted compared to transplantation of 300 pupae, indicating that queens were unable to handle 300 pupae adequately and that pupae require some amount of nursing. Nevertheless, within the 60-day experiment the transplantation of 300 pupae increased total colony size more than 10-fold whereas 100 pupae increased the size 5.6 fold, compared to control. This increase was due not only to the individuals added in the form of pupae but also to an increased per capita brood production by the resident queen, triggered by the adopted pupae. The size of hatching pupae produced by the resident queen also increased with the number of pupae transplanted, leading to larger nanitic workers in colonies adopting pupae. In conclusion, pupae transplantation may be used to produce larger colonies with larger worker ants and may thus reduce the time to produce weaver ant colonies for commercial purposes. This in turn may facilitate the implementation of the use of weaver ants.

Gender, aging, and work: aging workers' strategies to confront the demands of production in maquiladora plants in nogales, Mexico.

Science.gov (United States)

Adarga, Mireya Scarone; Becerril, Leonor Cedillo; Champion, Catalina Denman

2010-01-01

This work is part of a qualitative socio-cultural investigation with a group of men and women 40 years and older in the maquila export industry in Nogales, Sonora, Mexico. In 1994, as a result of the North American Free Trade Agreement, maquila plants combined traditional intensive work methods with new "just in time" production norms that impacted work and health conditions, particularly in older, or aging, workers. The workers that were interviewed for this study show a reduction in their functional ability to work starting at 40 years of age. Work organization demands, general health conditions, and a decrease in physical abilities brings these 40-year-old workers to prematurely construct an image of themselves as aging workers and to develop coping strategies that vary by gender.

Development of the Health and Work Questionnaire (HWQ): an instrument for assessing workplace productivity in relation to worker health.

Science.gov (United States)

Shikiar, Richard; Halpern, Michael T; Rentz, Anne M; Khan, Zeba M

2004-01-01

Workplace productivity evaluations often involve subjective assessments. This study was performed to develop and validate a new multidimensional instrument, the Health and Work Questionnaire (HWQ), for measuring workplace productivity and worker heath. In a prospective, non-randomized study, objective and subjective workplace productivity (measured with the HWQ) was assessed among 96 current, 94 former, and 104 non-smoking volunteer reservation agents at a US-based international airline. Six HWQ sub-scales were identified from factor analyses: productivity, concentration/focus, supervisor relations, impatience/irritability, work satisfaction, and non-work satisfaction. Non-smokers (individuals who had never smoked) had higher scores on all scales. The HWQ scale scores all correlated significantly with the objective measure "Time Lost"; two of the scales correlated significantly with the summary objective performance measure. Magnitudes of the significant correlations were modest (0.12 to 0.22). The HWQ may be useful for evaluating the impact of interventions on workplace productivity. Additional validation research on the HWQ is recommended before use as a primary measure in studies of worker productivity. Copyright 2004 IOS Press

Behavioural data on the production of males by workers in the stingless bee Melipona favosa (Apidae, Meliponinae)

NARCIS (Netherlands)

Sommeijer, M.J.; Chinh, T.X.; Meeuwsen, F.J.A.J.

1998-01-01

Male production was studied in four queenright M. favosa colonies by permanent and long duration observation of egg-laying and subsequent bee emergence. Workers produced males in all colonies; they produced 94.5% of all males.

Fabrication of a novel PbO2 electrode with a graphene nanosheet interlayer for electrochemical oxidation of 2-chlorophenol

International Nuclear Information System (INIS)

Duan, Xiaoyue; Zhao, Cuimei; Liu, Wei; Zhao, Xuesong; Chang, Limin

2017-01-01

Highlights: • A novel PbO 2 electrode with a GNS interlayer (GSN-PbO 2 ) was prepared. • The GNS interlayer reduced grain size of β-PbO 2 crystals. • The GNS interlayer enhanced electrochemical activity of PbO 2 electrode. • The lifetime of GSN-PbO 2 electrode was 1.93 times that of PbO 2 electrode. • An electrochemical mineralization mechanism of 2-chlorophenol was proposed. - Abstract: A novel PbO 2 electrode with a graphene nanosheet interlayer (marked as GNS-PbO 2 ) was prepared combining electrophoretic deposition and electro-deposition technologies. The micro morphology, crystal structure and surface chemical states of GNS-PbO 2 electrodes were characterized using scanning electronic microscopy (SEM), transmission electron microscopy (TEM), X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS). Their electrochemical properties and stability were determined using cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS), ·OH radicals test and accelerated life test, and compared with traditional PbO 2 electrodes. Besides, their potential application in the electrochemical degradation of 2-chlorophenol (2-CP) was investigated. The GNS-PbO 2 electrode possessed perfect octahedral β-PbO 2 microcrystals, and its grain size was much smaller than that of traditional PbO 2 electrode. It exhibited higher electrochemical activity than traditional PbO 2 electrode due to its larger electrochemical active surface area and stronger ·OH radicals generation ability. The service lifetime of GNS-PbO 2 electrode (107.9 h) was 1.93 times longer than that of traditional PbO 2 electrode (55.9 h). The electrochemical degradation rate constant of 2-CP on GNS-PbO 2 electrode (k app = 2.75 × 10 −2 min −1 ) is much higher than for PbO 2 electrode (k app = 1.76 × 10 −2 min −1 ). 2-CP oxidation yielded intermediates including aromatic compounds (catechol, phenol and ortho-benzoquinone) and organic acids (oxalic acid, maleic acid and

Optimization of headspace experimental factors to determine chlorophenols in water by means of headspace solid-phase microextraction and gas chromatography coupled with mass spectrometry and parallel factor analysis.

Science.gov (United States)

Morales, Rocío; Cruz Ortiz, M; Sarabia, Luis A

2012-11-19

In this work an analytical procedure based on headspace solid-phase microextraction and gas chromatography coupled with mass spectrometry (HS-SPME-GC/MS) is proposed to determine chlorophenols with prior derivatization step to improve analyte volatility and therefore the decision limit (CCα). After optimization, the analytical procedure was applied to analyze river water samples. The following analytes are studied: 2,4-dichlorophenol (2,4-DCP), 2,4,6-trichlorophenol (2,4,6-TrCP), 2,3,4,6-tetrachlorophenol (2,4,6-TeCP) and pentachlorophenol (PCP). A D-optimal design is used to study the parameters affecting the HS-SPME process and the derivatization step. Four experimental factors at two levels and one factor at three levels were considered: (i) equilibrium/extraction temperature, (ii) extraction time, (iii) sample volume, (iv) agitation time and (v) equilibrium time. In addition two interactions between four of them were considered. The D-optimal design enables the reduction of the number of experiments from 48 to 18 while maintaining enough precision in the estimation of the effects. As every analysis took 1h, the design is blocked in 2 days. The second-order property of the PARAFAC (parallel factor analysis) decomposition avoids the need of fitting a new calibration model each time that the experimental conditions change. In consequence, the standardized loadings in the sample mode estimated by a PARAFAC decomposition are the response used in the design because they are proportional to the amount of analyte extracted. It has been found that block effect is significant and that 60°C equilibrium temperature together with 25min extraction time are necessary to achieve the best extraction for the chlorophenols analyzed. The other factors and interactions were not significant. After that, a calibration based in a PARAFAC2 decomposition provided the following values of CCα: 120, 208, 86, 39ngL(-1) for 2,4-DCP, 2,4,6-TrCP, 2,3,4,5-TeCP and PCP respectively for a

Parameter Identification of the 2-Chlorophenol Oxidation Model Using Improved Differential Search Algorithm

Directory of Open Access Journals (Sweden)

Guang-zhou Chen

2015-01-01

Full Text Available Parameter identification plays a crucial role for simulating and using model. This paper firstly carried out the sensitivity analysis of the 2-chlorophenol oxidation model in supercritical water using the Monte Carlo method. Then, to address the nonlinearity of the model, two improved differential search (DS algorithms were proposed to carry out the parameter identification of the model. One strategy is to adopt the Latin hypercube sampling method to replace the uniform distribution of initial population; the other is to combine DS with simplex method. The results of sensitivity analysis reveal the sensitivity and the degree of difficulty identified for every model parameter. Furthermore, the posteriori probability distribution of parameters and the collaborative relationship between any two parameters can be obtained. To verify the effectiveness of the improved algorithms, the optimization performance of improved DS in kinetic parameter estimation is studied and compared with that of the basic DS algorithm, differential evolution, artificial bee colony optimization, and quantum-behaved particle swarm optimization. And the experimental results demonstrate that the DS with the Latin hypercube sampling method does not present better performance, while the hybrid methods have the advantages of strong global search ability and local search ability and are more effective than the other algorithms.

The adaptive significance of inquiline parasite workers

DEFF Research Database (Denmark)

Sumner, Seirian; Nash, David R; Boomsma, Jacobus J

2003-01-01

Social parasites exploit the socially managed resources of their host's society. Inquiline social parasites are dependent on their host throughout their life cycle, and so many of the traits inherited from their free-living ancestor are removed by natural selection. One trait that is commonly lost...... is the worker caste, the functions of which are adequately fulfilled by host workers. The few inquiline parasites that have retained a worker caste are thought to be at a transitional stage in the evolution of social parasitism, and their worker castes are considered vestigial and non-adaptive. However...... a vital role in ensuring the parasite's fitness. We show that the presence of these parasite workers has a positive effect on the production of parasite sexuals and a negative effect on the production of host sexuals. This suggests that inquiline workers play a vital role in suppressing host queen...

Fenton-like oxidation of 4-chlorophenol using H2O2 in situ generated by Zn-Fe-CNTs composite.

Science.gov (United States)

Liu, Yong; Fan, Qing; Liu, Yanlan; Wang, Jianlong

2018-05-15

In this paper, a zinc-iron-carbon nanotubes (Zn-Fe-CNTs) composite was prepared, characterized and used to develop a Fenton-like system of Zn-Fe-CNTs/O 2 for the degradation of 4-chlorophenol (4-CP), in which H 2 O 2 was generated in situ from zinc-carbon galvanic cells and oxygen in aqueous solution was activated by iron attached on the surface of CNTs to produce ·OH radicals for the oxidation of 4-CP. The experimental results showed that the particles of Zn and Fe in Zn-Fe-CNTs composite were adhered to the surface of CNTs, which accelerated the electron transfer process. The BET area of Zn-Fe-CNTs composite was 32.9 m 2 /g. The contents of Zn and Fe (% w) in the composite were 44.7% and 4.2%, respectively. The removal efficiency of 4-CP and TOC in Zn-Fe-CNTs/O 2 system was 90.8% and 52.9%, respectively, with the initial pH of 2.0, O 2 flow rate of 800 mL/min, Zn-Fe-CNTs dosage of 1.0 g/L, 4-CP concentration of 50 mg/L and reaction time of 20 min. Based on the analysis of the degradation intermediate products with LC-MS and IC, a possible degradation pathway of 4-CP in Zn-Fe-CNTs/O 2 system was proposed. Copyright © 2018 Elsevier Ltd. All rights reserved.

Solid-phase extraction of chlorophenols in seawater using a magnetic ionic liquid molecularly imprinted polymer with incorporated silicon dioxide as a sorbent.

Science.gov (United States)

Ma, Wanwan; Row, Kyung Ho

2018-07-20

A type of magnetic ionic liquid based molecularly imprinted polymer coated on SiO 2 (Fe 3 O 4 @SiO 2 @IL-MIPs) was prepared with 1-vinyl-3-ethylimidazole ionic liquid as functional monomer, and 1,4-butane-3,3'-bis-1-ethylimidazole ionic liquid as cross linker, 4-Chlorophenol as template was successfully applied as a selective adsorbent for selective extraction of 5 chlorophenols in seawater samples by using the magnetic solid-phase extraction (MSPE) method. 11 types of Fe 3 O 4 @SiO 2 @IL-MIPs were synthesized and investigated for their different compositions of functional monomer (such as [C 2 min][Br], [C 2 min][BF 4 ], [C 2 min][PF 6 ], acrylamide, methacrylic acid and 4-vinyl pyridine) and cross-linker (such as [C 4 min 2 ][Br], [C 4 min 2 ][BF 4 ], [C 4 min 2 ][PF 6 ], divinylbenzene, and ethylene glycol dimethacrylate), respectively. The [C 2 min][BF 4 ] and [C 4 min 2 ][PF 6 ] based Fe 3 O 4 @SiO 2 @IL-MIP with the highest extraction efficiencies was applied to the optimization experiment of MSPE process (including extraction time, adsorbent mass and desorption solvents). Good linearity was obtained with correlation coefficients (R 2 ) over 0.9990 and the relative standard deviations for the intra-day and inter-day determination were less than 3.10% with the extraction recoveries ranged from 85.0% to 98.4%. The results indicated that the proposed Fe 3 O 4 @SiO 2 @IL-MIPs possesses great identification and adsorption properties, and could be used as a good sorbent for selective extraction of CPs in environment waters. Copyright © 2018 Elsevier B.V. All rights reserved.

Benchmarking worker nodes using LHCb productions and comparing with HEPSpec06

Science.gov (United States)

Charpentier, P.

2017-10-01

In order to estimate the capabilities of a computing slot with limited processing time, it is necessary to know with a rather good precision its “power”. This allows for example pilot jobs to match a task for which the required CPU-work is known, or to define the number of events to be processed knowing the CPU-work per event. Otherwise one always has the risk that the task is aborted because it exceeds the CPU capabilities of the resource. It also allows a better accounting of the consumed resources. The traditional way the CPU power is estimated in WLCG since 2007 is using the HEP-Spec06 benchmark (HS06) suite that was verified at the time to scale properly with a set of typical HEP applications. However, the hardware architecture of processors has evolved, all WLCG experiments moved to using 64-bit applications and use different compilation flags from those advertised for running HS06. It is therefore interesting to check the scaling of HS06 with the HEP applications. For this purpose, we have been using CPU intensive massive simulation productions from the LHCb experiment and compared their event throughput to the HS06 rating of the worker nodes. We also compared it with a much faster benchmark script that is used by the DIRAC framework used by LHCb for evaluating at run time the performance of the worker nodes. This contribution reports on the finding of these comparisons: the main observation is that the scaling with HS06 is no longer fulfilled, while the fast benchmarks have a better scaling but are less precise. One can also clearly see that some hardware or software features when enabled on the worker nodes may enhance their performance beyond expectation from either benchmark, depending on external factors.

Advanced worker protection system. Topical report, Phase I

Energy Technology Data Exchange (ETDEWEB)

Myers, J.

1995-07-01

The Department of Energy (DOE) is in the process of defining the magnitude and diversity of Decontamination and Decommissioning (D&D) obligations at its numerous sites. The DOE believes that existing technologies are inadequate to solve many challenging problems such as how to decontaminate structures and equipment cost effectively, what to do with materials and wastes generated, and how to adequately protect workers and the environment. Preliminary estimates show a tremendous need for effective use of resources over a relatively long period (over 30 years). Several technologies are being investigated which can potentially reduce D&D costs while providing appropriate protection to DOE workers. The DOE recognizes that traditional methods used by the EPA in hazardous waste site clean up activities are insufficient to provide the needed protection and worker productivity demanded by DOE D&D programs. As a consequence, new clothing and equipment which can adequately protect workers while providing increases in worker productivity are being sought for implementation at DOE sites. This project will result in the development of an Advanced Worker Protection System (AWPS). The AWPS will be built around a life support backpack that uses liquid air to provide cooling as well as breathing gas to the worker. The backpack will be combined with advanced protective garments, advanced liquid cooling garment, respirator, communications, and support equipment to provide improved worker protection, simplified system, maintenance, and dramatically improve worker productivity through longer duration work cycles.

Hotel workers and the production of tourist speech

Directory of Open Access Journals (Sweden)

Juliana Souza Dartora

2007-12-01

Full Text Available Exploratory research undertaken in the city of Caxias do Sul/RS, aimed to analyze the production of speeches related to Tourism by local hotel workers. Concepts and basis from Social Psychology are used, specially the constructs ‘perception’ and ‘attitude’, and the theories on Social Communication about imaginaries. The methodology of the analysis also makes use of the content analysis as proposed by Bardin (1997, in the context of communication studies. The results illustrate that the subjects do not consider satisfactory the city relationship with the tourist activity, when it is compared to other cities belonging to the same region, attributing the fact, among others, that other cities would be in the media more frequently and that in Caxias do Sul, the industry sector would overlap the tourist sector. This illustrates the reproduction of a traditional imaginary pointed out by the WTO, in which tourism would be associated exclusively to leisure. Nevertheless, the category business travel is a constant in the worker’s speech.

Improvement of environment and work posture through ergonomic approach to increase productivity of balinese kepeng coin workers in Kamasan village Klungkung Bali

Science.gov (United States)

Suarbawa, I. K. G. J.; Arsawan, M.; Yusuf, M.; Anom Santiana, I. M.

2018-01-01

Balinese coins (Pis Bolong) have become part of Balinese life as yadnya material or religious ceremony. To meet a variety of purposes, balinese coint today many produced by the community Kamasan village of Bali, in addition to religious purposes are also used as souvenirs. Pis bolong (kepeng coin) manufactured by molding techniques and molding metal in a simple manner of raw materials in a furnace smelting subsequently printed and refining process. Kepeng coins (Balinese coins) to production reached 20,000 in a day with more than 50 artisans. Use of a furnace with open flame and work posture and ways of working are not naturally able to increase the workload, subjective disorders of artisans, and decrease productivity. To overcome these problems, the improvement of environment and work posture by ergonomic approach. This research used by design “pre and post test group design” to 8 crafters of the melting process. Productivity calculated from the number of kepeng coin produced per work pulse of workers. The results showed that there were significant difference in productivity between treatment 1 (using old way) with treatment 2 (using improvement of environment and work posture) in kepeng coin workers. Work productivity increase by 33.9%. It can be concluded that the improvement of environment and work posture through ergonomic approach increase productivity of kepeng coin workers.

[Comprehension of hazard pictograms of chemical products among cleaning workers].

Science.gov (United States)

Martí Fernández, Francesc; van der Haar, Rudolf; López López, Juan Carlos; Portell, Mariona; Torner Solé, Anna

2015-01-01

To assess the comprehension among cleaning workers of the hazard pictograms as defined by the Globally Harmonized System (GHS) of the United Nations, concerning the classification, labeling and packaging of substances and mixtures. A sample of 118 workers was surveyed on their perception of the GHS hazard pictograms. Comprehensibility was measured by the percentage of correct answers and the degree to which they reflected International Organization for Standardization and American National Standards Institute standards for minimum level of comprehension. The influence of different variables to predict comprehension capacity was assessed using a logistic regression model. Three groups of pictograms could be distinguished which were statistically differentiated by their comprehensibility. Pictograms reflecting "acute toxicity" and "flammable", were described correctly by 94% and 95% of the surveyed population, respectively. For pictograms reflecting "systemic toxicity", "corrosive", "warning", "environment" and "explosive" the frequency of correct answers ranged from 48% to 64%, whereas those for pictograms "oxidizing" and "compressed gas" were interpreted correctly by only 7% of respondents. Prognostic factors for poor comprehension included: not being familiar with the pictograms, not having received training on safe use of chemical products, being an immigrant and being 54 years of age or older. Only two pictograms exceeded minimum standards for comprehension. Training, a tool proven to be effective to improve the correct interpretation of danger symbols, should be encouraged, especially in those groups with greater comprehension difficulties. Copyright belongs to the Societat Catalana de Salut Laboral.

Enhanced aerobic degradation of 4-chlorophenol with iron-nickel nanoparticles

Energy Technology Data Exchange (ETDEWEB)

Shen, Wenjuan; Mu, Yi; Wang, Bingning; Ai, Zhihui, E-mail: jennifer.ai@mail.ccnu.edu.cn; Zhang, Lizhi

2017-01-30

Highlights: • Bimetallic iron-nickel nanoparticles possessed an enhanced performance on aerobic degradation of 4-CP. • Hydroxyl radicals were the major active species contributed to aerobic 4-CP degradation with nZVI. • Superoxide radicals predominated the 4-CP degradation in the nZVIN/Air process. • The 4-CP degradation pathways were dependent on the generated superoxide radicals in the nZVIN/Air process. - Abstract: In this study, we demonstrate that the bimetallic iron-nickel nanoparticles (nZVIN) possessed an enhanced performance in comparison with nanoscale zero-valent iron (nZVI) on aerobic degradation of 4-chlorophenol (4-CP). The 4-CP degradation rate constant in the aerobic nZVIN process (nZVIN/Air) was 5 times that in the classic nZVI counterpart system (nZVI/Air). Both reactive oxygen species measurement and inhibition experimental results suggested that hydroxyl radicals were the major active species contributed to aerobic 4-CP degradation with nZVI, on contrast, superoxide radicals predominated the 4-CP degradation in the nZVIN/Air process. High performance liquid chromatography and gas chromatography-mass spectrometer analysis indicated the intermediates of the nZVI/Air system were p-benzoquinone and hydroquinone, which were resulted from the bond cleavage between the chlorine and carbon atom in the benzene ring by hydroxyl radicals. However, the primary intermediates of 4-CP found in the nZVIN/Air system were phenol via the direct dechlorination by superoxide radicals, accompanying with the formation of chloride ions. On the base of experimental results, a superoxide radicals mediated enhancing mechanism was proposed for the aerobic degradation of 4-CP in the nZVIN/Air system. This study provides new insight into the role of bimetallic nickel on enhancing removal of organic pollutants with nZVI.

Evaluating the Impacts of Health, Social Network and Capital on Craft Efficiency and Productivity: A Case Study of Construction Workers in China

Directory of Open Access Journals (Sweden)

Jingfeng Yuan

2018-02-01

Full Text Available The construction industry has been recognized, for many years, as among those having a high likelihood of accidents, injuries and occupational illnesses. Such risks of construction workers can lead to low productivity and social problems. As a result, construction workers’ well-being should be highly addressed to improve construction workers’ efficiency and productivity. Meanwhile, the social support from a social network and capital (SNC of construction workers has been considered as an effective approach to promote construction workers’ physical and mental health (P&M health, as well as their work efficiency and productivity. Based on a comprehensive literature review, a conceptual model, which aims to improve construction workers’ efficiency and productivity from the perspective of health and SNC, was proposed. A questionnaire survey was conducted to investigate the construction workers’ health, SNC and work efficiency and productivity in Nanjing, China. A structural equation model (SEM was employed to test the three hypothetical relationships among construction workers’ P&M health, SNC and work efficiency and productivity. The results indicated that the direct impacts from construction workers’ P&M health on work efficiency and productivity were more significant than that from the SNC. In addition, the construction workers’ social capital and the network can indirectly influence the work efficiency and productivity by affecting the construction workers’ P&M health. Therefore, strategies for enhancing construction workers’ efficiency and productivity were proposed. Furthermore, many useable suggestions can be drawn from the research findings from the perspective of a government. The identified indicators and relationships would contribute to the construction work efficiency and productivity assessment and health management from the perspective of the construction workers.

Evaluating the Impacts of Health, Social Network and Capital on Craft Efficiency and Productivity: A Case Study of Construction Workers in China

Science.gov (United States)

Yi, Wen; Miao, Mengyi; Zhang, Lei

2018-01-01

The construction industry has been recognized, for many years, as among those having a high likelihood of accidents, injuries and occupational illnesses. Such risks of construction workers can lead to low productivity and social problems. As a result, construction workers’ well-being should be highly addressed to improve construction workers’ efficiency and productivity. Meanwhile, the social support from a social network and capital (SNC) of construction workers has been considered as an effective approach to promote construction workers’ physical and mental health (P&M health), as well as their work efficiency and productivity. Based on a comprehensive literature review, a conceptual model, which aims to improve construction workers’ efficiency and productivity from the perspective of health and SNC, was proposed. A questionnaire survey was conducted to investigate the construction workers’ health, SNC and work efficiency and productivity in Nanjing, China. A structural equation model (SEM) was employed to test the three hypothetical relationships among construction workers’ P&M health, SNC and work efficiency and productivity. The results indicated that the direct impacts from construction workers’ P&M health on work efficiency and productivity were more significant than that from the SNC. In addition, the construction workers’ social capital and the network can indirectly influence the work efficiency and productivity by affecting the construction workers’ P&M health. Therefore, strategies for enhancing construction workers’ efficiency and productivity were proposed. Furthermore, many useable suggestions can be drawn from the research findings from the perspective of a government. The identified indicators and relationships would contribute to the construction work efficiency and productivity assessment and health management from the perspective of the construction workers. PMID:29462861

Proposal and application of methodology for monitoring workers occupationally exposed to Thorium-232 and its decay products

International Nuclear Information System (INIS)

Dantas, Bernardo Maranhao

1993-08-01

Thorium-232 is the parent of one of the naturally occurring decay series and is widely spread on the earth's crust, being also present in higher concentrations at some deposits located mainly in Brazil and India. The occupational exposure to this radionuclide may occur in several steps of the thorium cycle. In Brazil, there is a large number of workers that should be monitored because they manipulate directly or indirectly different kinds of ores, raw materials and products containing significant amounts of thorium in its composition. In this study, the techniques developed specifically for the in vivo and in vitro monitoring of these workers are presented together with the application of these techniques to a group of selected workers classified as occupationally exposed. It is also presented the methodology by which the results obtained with these measurements are interpreted with the objective of identifying the main pathways of incorporation and reducing the internal doses to values as low as reasonably achievable. (author)

Worker self-selection and the profits from cooperation

NARCIS (Netherlands)

Kosfeld, M.; von Siemens, F.A.

2009-01-01

We investigate a competitive labor market with team production. Workers differ in their motivation to exert team effort, and types are private information. We show that there can exist a separating equilibrium in which workers self-select into different firms and firms employing cooperative workers

Extended followup of a cohort of chromium production workers

Science.gov (United States)

Lees, Peter St. John; Wang, Jing; Grace O'Leary, Keri

2015-01-01

Background The current study evaluates the mortality of 2,354 workers first employed at a Baltimore chromate production plant between 1950 and 1974. Methods The National Death Index (NDI Plus) was used to determine vital status and cause of death. Cumulative chromium (VI) exposure and nasal and skin irritation were evaluated as risk factors for lung cancer mortality. Results There are 91,186 person‐years of observation and 217 lung cancer deaths. Cumulative chromium (VI) exposure, nasal irritation, nasal perforation, nasal ulceration, and other forms of irritation (e.g., skin irritation) were associated with lung cancer mortality. Conclusion Cumulative chromium (VI) exposure was a risk factor for lung cancer death. Cancer deaths, other than lung cancer, were not significantly elevated. Irritation may be a possible mechanism for chromium (VI)‐induced lung cancer. Am. J. Ind. Med. 58:905–913, 2015. © 2015 The Authors. American Journal of Industrial Medicine Published by Wiley Periodicals, Inc. PMID:26041683

The impact of sit-stand office workstations on worker discomfort and productivity: a review.

Science.gov (United States)

Karakolis, Thomas; Callaghan, Jack P

2014-05-01

This review examines the effectiveness of sit-stand workstations at reducing worker discomfort without causing a decrease in productivity. Four databases were searched for studies on sit-stand workstations, and five selection criteria were used to identify appropriate articles. Fourteen articles were identified that met at least three of the five selection criteria. Seven of the identified studies reported either local, whole body or both local and whole body subjective discomfort scores. Six of these studies indicated implementing sit-stand workstations in an office environment led to lower levels of reported subjective discomfort (three of which were statistically significant). Therefore, this review concluded that sit-stand workstations are likely effective in reducing perceived discomfort. Eight of the identified studies reported a productivity outcome. Three of these studies reported an increase in productivity during sit-stand work, four reported no affect on productivity, and one reported mixed productivity results. Therefore, this review concluded that sit-stand workstations do not cause a decrease in productivity. Crown Copyright © 2013. Published by Elsevier Ltd. All rights reserved.

Older workers

NARCIS (Netherlands)

Ybema,J.F.; Giesen, F.

2014-01-01

Due to an ageing population and global economic competition, there is a societal need for people to extend their working lives while maintaining high work productivity. This article presents an overview of the labour participation, job performance, and job characteristics of older workers in the

Pornography, Sexual Enhancement Products, and Sexual Risk of Female Sex Workers and their Clients in Southern India.

Science.gov (United States)

Bradley, Janet; Rajaram, Subramanian Potty; Isac, Shajy; Gurav, Kaveri; Ramesh, B M; Gowda, Chandrashekhar; Moses, Stephen; Alary, Michel

2016-05-01

Despite their large numbers, and important role in the HIV epidemic in India, male clients of female sex workers (FSWs) are a difficult to reach population and little is known about their sexual behaviors. Using data from an integrated behavioral and biological assessment of 684 clients in Bangalore in 2012, we examined factors associated with their reports of having sex with three or more different female sex workers in the last month, and anal sex with sex workers. We included sociodemographic and sexual behavior factors and, for the first time in client studies in India, included data on the use of pornography and sexual enhancement products (SEPs) such as pills, oils, and sprays, in our multivariable analyses of client risk. Seventy-eight percent of clients had seen pornographic material and 8% reported ever having used SEPs. The profiles of men practicing the two risk behaviors examined were quite different. Travel in the past year, drunkenness in the past month, young age at first commercial sex, non-use of condoms at last sex, and finding sex workers in public places (but not use of pornography and SEPs) were independently associated with multiple partnering. Sex with a man or transsexual, being a white collar worker, seeking out FSWs at home, pornography and SEP use, and condom use at last FSW sex, were all independently associated with anal sex with an FSW. More research is needed to better understand the links between pornography and SEPs, and HIV risk behaviors, and HIV prevention programs need to be cognizant of the importance of ensuring that condom use is adequately promoted and supported in the context of anal sex in female sex worker-client interactions.

Tea production characteristics of tea growers (plantations and smallholdings and livelihood dimensions of tea workers in Assam, India

Directory of Open Access Journals (Sweden)

Eloise M. Biggs

2018-04-01

Full Text Available This article provides summary data regarding tea production in Assam, India. Questionnaires were completed by tea producers and focus group discussions undertaken with tea workers. These data are presented for the four main tea growing regions of the state (Cachar, North Bank, South Bank and Upper Assam. Tables detail tea production characteristics of the tea plantations for both large- (> 10 ha and small- (< 10 ha holders. Figures provide supplementary information for research by Biggs et al. [1] regarding fertilizer application, landscape management strategies, healthcare provisioning and educational facilities within plantations, as well as detailing the livelihood dimensions of tea workers. The questions posed to producers are also included. For further context underpinning the research for which these data were collated, see ‘The tea landscape of Assam: multi-stakeholder insights into sustainable livelihoods under a changing climate’ by Biggs et al. [1].

Microbiological air pollution of production room of the meat processing plant as a potential threat to the workers

Directory of Open Access Journals (Sweden)

Barbara Breza-Boruta

2015-12-01

Full Text Available Introduction. Production rooms of the meat plants are the specific environment that require constant monitoring of microbiological air purity. Bioaerosols pose a threat to the safety of produced food and a considerable risk to health of exposed workers. The aim of this study was to estimate the air microbiological pollution in production rooms of the meat processing plant and exposure of the workers to biological aerosol. Material and methods. Air samples were collected at 3 stands in production rooms during winter, with the compaction method using the impactor MAS-100. The total number of bacteria and moulds, Staphylococci and bacteria of the family Enterobacteriaceae were determined in the studied bioaerosol. The concentration of microorganisms was presented in the form of colony forming units in 1m3 of air. Results. The highest concentration of mesophylic bacteria was found at stand 1 – at the freezing tunnel; whereas the highest contamination with staphylococci and fungal aerosol was found in the room where several workers were employed at packing frozen food. Among determined fungi predominated moulds of the genera: Penicillium, Alternaria and Cladosporium. Also species of potentially pathogenic fungi which produce toxins and have allergizing properties were detected in the studied bioaerosol. Bacteria of the family Enterobacteriaceae, which also may cause many infavourable health effects in exposed people, occurred at all stands. Conclusion. The concentration level and microbial composition in the inhaled air make valuable information for determination of occupational risk and a potential threat to workers of their workstations. Potentially pathogenic microorganisms present in the studied air (staphylococci, bacteria of the family Enterobacteriaceae and some moulds according to the Directive 2000/54/EC l belong to the 2nd group of risk and threat of harmful biological agents. Identification of biological threats makes it easier for the

78 FR 21151 - G4 Products, LLC a Subsidiary of G4 Holdings, Inc. Including Workers Whose Wages are Paid Under...

Science.gov (United States)

2013-04-09

... certification for G4 Products. Additional information provided by the company official revealed that the subject... DEPARTMENT OF LABOR Employment and Training Administration [TA-W-81,432] G4 Products, LLC a...-Site Leased Workers from OSW and Maine Staffing Group Lewiston, ME; Amended Certification Regarding...

Developing positive worker attitudes toward radiation protection

International Nuclear Information System (INIS)

Millis, N.L.

1987-01-01

Teamwork, productivity, and reducing exposure are admirable goals presented to the workers in a nuclear power plant. A common thread to achievement in these areas resides in worker attitudes toward the tasks presented. A positive, alert, and cooperative attitude is an element in a worker's mind that must be created and maintained by good leadership and management practices. At the Calvert Cliffs Nuclear Power Plant, management has used certain strategies to foster good positive worker attitudes toward radiation protection and quality workmanship in all tasks. Strategies differ from management by objectives in that they have no deadlines or timetables in and of themselves. Rather, strategies are preplanned methods that can be called upon when the opportunity arises to improve worker attitudes. A series of five strategies for positive attitude development are described in the full paper. The strategies are identified with buzz words to allow the user a recall mechanism (as with the acronyms abounding in the nuclear industry). They cover the range of management techniques from example setting to reward/recognition. Although not unique to radiation exposure management, nor all inclusive, the strategies provide some though stimulation in creating productive worker attitudes

75 FR 76040 - Dell Products LP, Winston-Salem (WS-1) Division, Including On-Site Leased Workers From Adecco...

Science.gov (United States)

2010-12-07

..., Winston-Salem, North Carolina. The notice was published in the Federal Register on April 23, 2010 (75 FR... from Staffing Solutions, South East, and Omni Resources and Recovery. The notices were published in the... firm. The workers are engaged in employment related to the production of desktop computers. New...

76 FR 2710 - Dell Products LP, Winston-Salem (WS-1) Division, Including On-Site Leased Workers From Adecco...

Science.gov (United States)

2011-01-14

..., APN and ICONMA, Winston-Salem, North Carolina. The notice was published in the Federal Register on... Seaton Corporation. The notices were published on the Federal Register on April 19, 2010 (75 FR 20385... workers are engaged in employment related to the production of desktop computers. New information shows...

An adsorption diffusion model for removal of para-chlorophenol by activated carbon derived from bituminous coal

International Nuclear Information System (INIS)

Sze, M.F.F.; McKay, G.

2010-01-01

Batch adsorption experiments were carried out to study the adsorptive removal and diffusion mechanism of para-chlorophenol (p-CP) onto Calgon Filtrasorb 400 (F400) activated carbon. The external mass transfer resistance is negligible in the adsorption process carried out under different conditions in batch operation. Intraparticle diffusion model plots were used to correlate the batch p-CP adsorption data; three distinct linear sections were obtained for every batch operation. The textural properties of F400 activated carbon showed that it has a large portion of supermicropores, which is comparable to the size of the p-CP molecules. Due to the stronger interactions between p-CP molecules and F400 micropores, p-CP molecules predominantly diffused and occupied active sites in micropore region by hopping mechanism, and eventually followed by a slow filling of mesopores and micropores. This hypothesis is proven by the excellent agreement of the intraparticle diffusion model plots and the textural properties of F400 activated carbon. - Integration of intraparticle diffusion model plots and textural properties of F400 activated carbon explain the diffusion mechanism of p-CP into porous carbon.

Using Computer Simulation Method to Improve Throughput of Production Systems by Buffers and Workers Allocation

Directory of Open Access Journals (Sweden)

Kłos Sławomir

2015-12-01

Full Text Available This paper proposes the application of computer simulation methods to support decision making regarding intermediate buffer allocations in a series-parallel production line. The simulation model of the production system is based on a real example of a manufacturing company working in the automotive industry. Simulation experiments were conducted for different allocations of buffer capacities and different numbers of employees. The production system consists of three technological operations with intermediate buffers between each operation. The technological operations are carried out using machines and every machine can be operated by one worker. Multi-work in the production system is available (one operator operates several machines. On the basis of the simulation experiments, the relationship between system throughput, buffer allocation and the number of employees is analyzed. Increasing the buffer capacity results in an increase in the average product lifespan. Therefore, in the article a new index is proposed that includes the throughput of the manufacturing system and product life span. Simulation experiments were performed for different configurations of technological operations.

Predicting adsorptive removal of chlorophenol from aqueous solution using artificial intelligence based modeling approaches.

Science.gov (United States)

Singh, Kunwar P; Gupta, Shikha; Ojha, Priyanka; Rai, Premanjali

2013-04-01

The research aims to develop artificial intelligence (AI)-based model to predict the adsorptive removal of 2-chlorophenol (CP) in aqueous solution by coconut shell carbon (CSC) using four operational variables (pH of solution, adsorbate concentration, temperature, and contact time), and to investigate their effects on the adsorption process. Accordingly, based on a factorial design, 640 batch experiments were conducted. Nonlinearities in experimental data were checked using Brock-Dechert-Scheimkman (BDS) statistics. Five nonlinear models were constructed to predict the adsorptive removal of CP in aqueous solution by CSC using four variables as input. Performances of the constructed models were evaluated and compared using statistical criteria. BDS statistics revealed strong nonlinearity in experimental data. Performance of all the models constructed here was satisfactory. Radial basis function network (RBFN) and multilayer perceptron network (MLPN) models performed better than generalized regression neural network, support vector machines, and gene expression programming models. Sensitivity analysis revealed that the contact time had highest effect on adsorption followed by the solution pH, temperature, and CP concentration. The study concluded that all the models constructed here were capable of capturing the nonlinearity in data. A better generalization and predictive performance of RBFN and MLPN models suggested that these can be used to predict the adsorption of CP in aqueous solution using CSC.

[Using Excess Activated Sludge Treated 4-Chlorophenol Contained Waste Water to Cultivate Chlorella vulgaris].

Science.gov (United States)

Wang, Lu; Chen, Xiu-rong; Yan, Long; He, Yi-xuan; Shi, Zhen-dong

2015-04-01

Using different rations of sludge extracts and supernate from 4-Chlorophenol (4-CP) simulated wastewater's excess sludge after centrifugation to cultivate the Chlorella vulgaris to achieve the goal of excess sludge utilization together with chlorella cultivating. The experiments were performed in 500 mL flasks with different rations of sludge extracts & BG-11 and supernate & BG-11 in a light growth chamber respectively. Number of algal cells, Chlorophyll, enzyme activity, oil and water total nitrogen (TN), total phosphorus (TP), total organic carbon (TOC), toxicity index were investigated. Result showed that the nutrition supplies and toxicity in the excess sludge were removed efficiently via Chlorella vulgaris, the removal rates of TN and TP were at least 40% and 90% respectively; After 10 days cultivation, the density growth of 50% sludge extracts was 20 times higher of the beginning while its chlorophyll content was lower than that of the blank group. Sludge extracts could promote the proliferation of algae, but were not conducive to the synthesis of chlorophyll. The quantity of SOD in per cell showed Chlorella vulgaris gave a positive response via stimulation from toxicant in sludge extracts and supernate. The best time for collecting chlorella vulgaris was the fifth day of cultivation, taking neutral oil accumulation as the evaluating indicator for its utilization combined with the removal of supplies and toxicity.

The role of human-at-work systems in business sustainability: perspectives based on expert and qualified production workers in a manufacturing enterprise.

Science.gov (United States)

Genaidy, Ash M; Rinder, Maria M; Sequeira, Reynold; A-Rehim, Amal

2010-04-01

A community of highly qualified employees is desirable for the workforce to become a competitive business advantage, improving and sustaining corporate health. Currently, the scientific literature is limited on information comparing the assessment of expert and qualified workers for the employee-work environment interface. Such information would be valuable for industrial managers to obtain and act on the different perspectives of its workers for business improvement and survivability. A primary objective of this study is to explore the perspectives of expert and qualified workers on the quality of the employee-work environment interface in a manufacturing enterprise. This investigation was performed in a production department in a small manufacturing enterprise. Two expert workers participated in the study, with each being in the company for 30 years and having performed all jobs in the production department as well as supervisory and line management responsibilities. A total of 13 qualified workers from day and night shifts were used in the study, with the great majority of workers possessing 10 or more years of on-the-job experience but not acquiring the same specialised knowledge required for operating the technological resources in the department. The work compatibility methodology was used to assess the quality of employee-work environment interface for both expert and qualified workers. Both expert and qualified workers provided similar trends in terms of their compatibility assessment of experienced and acting work domains. In general, the compatibility levels for the day shift were poorer than those obtained for the night shift for acting work domains. The similarities in assessment between the expert and qualified workers were much closer for factors impacting job performance at the task and immediate surrounding levels (i.e. physical and mental task content, physical environment). There were greater differences at the macro level, that is, at the process

76 FR 21034 - Dell Products LP, Winston-Salem (WS-1) Division, Including On-Site Leased Workers From Adecco...

Science.gov (United States)

2011-04-14

... Carolina. The workers are engaged in employment related to the production of desktop computers. The notice was published in the Federal Register on April 23, 2010 (75 FR 21361). The notices were amended on.... The notices were published in the Federal Register on April 19, 2010 (75 FR 20385), September 13, 2010...

Non-occupational physical activity levels of shift workers compared with non-shift workers.

Science.gov (United States)

Loef, Bette; Hulsegge, Gerben; Wendel-Vos, G C Wanda; Verschuren, W M Monique; Vermeulen, Roel C H; Bakker, Marije F; van der Beek, Allard J; Proper, Karin I

2017-05-01

Lack of physical activity (PA) has been hypothesised as an underlying mechanism in the adverse health effects of shift work. Therefore, our aim was to compare non-occupational PA levels between shift workers and non-shift workers. Furthermore, exposure-response relationships for frequency of night shifts and years of shift work regarding non-occupational PA levels were studied. Data of 5980 non-shift workers and 532 shift workers from the European Prospective Investigation into Cancer and Nutrition-Netherlands (EPIC-NL) were used in these cross-sectional analyses. Time spent (hours/week) in different PA types (walking/cycling/exercise/chores) and intensities (moderate/vigorous) were calculated based on self-reported PA. Furthermore, sports were operationalised as: playing sports (no/yes), individual versus non-individual sports, and non-vigorous-intensity versus vigorous-intensity sports. PA levels were compared between shift workers and non-shift workers using Generalized Estimating Equations and logistic regression. Shift workers reported spending more time walking than non-shift workers (B=2.3 (95% CI 1.2 to 3.4)), but shift work was not associated with other PA types and any of the sports activities. Shift workers who worked 1-4 night shifts/month (B=2.4 (95% CI 0.6 to 4.3)) and ≥5 night shifts/month (B=3.7 (95% CI 1.8 to 5.6)) spent more time walking than non-shift workers. No exposure-response relationships were found between years of shift work and PA levels. Shift workers spent more time walking than non-shift workers, but we observed no differences in other non-occupational PA levels. To better understand if and how PA plays a role in the negative health consequences of shift work, our findings need to be confirmed in future studies. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/.

Respiratory tract mortality in cement workers: a proportionate mortality study

Science.gov (United States)

2012-01-01

Background The evidence regarding the association between lung cancer and occupational exposure to cement is controversial. This study investigated causes of deaths from cancer of respiratory tract among cement workers. Methods The deaths of the Greek Cement Workers Compensation Scheme were analyzed covering the period 1969-1998. All respiratory, lung, laryngeal and urinary bladder cancer proportionate mortality were calculated for cement production, maintenance, and office workers in the cement industry. Mortality from urinary bladder cancer was used as an indirect indicator of the confounding effect of smoking. Results Mortality from all respiratory cancer was significantly increased in cement production workers (PMR = 1.91; 95% CI 1.54 to 2.33). The proportionate mortality from lung cancer was significantly elevated (PMR = 2.05; 95% CI 1.65 to 2.52). A statistically significant increase in proportionate mortality due to respiratory (PMR = 1.7; 95% CI 1.2 to 2.34). and lung cancer (PMR = 1.67;95% CI = 1.15-2.34) among maintenance workers has been observed. The PMR among the three groups of workers (production, maintenance, office) did differ significantly for lung cancer (p = 0.001), while the PMR for urinary bladder cancer found to be similar among the three groups of cement workers. Conclusion Cement production, and maintenance workers presented increased lung and respiratory cancer proportionate mortality, and this finding probably cannot be explained by the confounding effect of smoking alone. Further research including use of prospective cohort studies is needed in order to establish a causal association between occupational exposure to cement and risk of lung cancer. PMID:22738120

Stress in Humanitarian Workers

African Journals Online (AJOL)

user

recognized as one of the most serious occupational health hazards reducing workers' satisfaction and productivity,. 1-3 ... Using a self- ... Kan D, Yu X. Occupational Stress, Work-Family. Conflict and Depressive Symptoms among Chinese.

75 FR 56564 - Dell Products LP, Winston-Salem (WS-1) Division Including On-Site Leased Workers From Adecco...

Science.gov (United States)

2010-09-16

... Carolina. The notice was published in the Federal Register on April 23, 2010 (75 FR 21361). The notice was... notice was published in the Federal Register on April 19, 2010 (75 FR 20385). At the request of the State... engaged in employment related to the production of desktop computers. New information shows that workers...

75 FR 57505 - Dell Products LP, Winston-Salem (WS-1) Division, Including On-Site Leased Workers From Adecco...

Science.gov (United States)

2010-09-21

... Carolina. The notice was published in the Federal Register on April 23, 2010 (75 FR 21361). The notice was... notice was published in the Federal Register on April 19, 2010 (75 FR 20385) At the request of the State... engaged in employment related to the production of desktop computers. New information shows that workers...

75 FR 55614 - Dell Products LP, Winston-Salem (WS-1) Division, Including On-Site Leased Workers From Adecco...

Science.gov (United States)

2010-09-13

... Carolina. The notice was published in the Federal Register on April 23, 2010 (75 FR 21361). The notice was... notice was published in the Federal Register on April 19, 2010 (75 FR 20385) At the request of the State... engaged in employment related to the production of desktop computers. New information shows that workers...

Toxicity assessment of 4-chlorophenol to aerobic granular sludge and its interaction with extracellular polymeric substances

Energy Technology Data Exchange (ETDEWEB)

Wei, Dong; Wang, Yifan; Wang, Xiaodong; Li, Mengting; Han, Fei; Ju, Luyu; Zhang, Ge; Shi, Li; Li, Kai; Wang, Bingfeng [School of Resources and Environmental Sciences, University of Jinan, Jinan 250022 (China); Du, Bin, E-mail: dubin61@gmail.com [School of Resources and Environmental Sciences, University of Jinan, Jinan 250022 (China); Key Laboratory of Chemical Sensing & Analysis in Universities of Shandong, School of Chemistry and Chemical Engineering, University of Jinan, Jinan 250022 (China); Wei, Qin [Key Laboratory of Chemical Sensing & Analysis in Universities of Shandong, School of Chemistry and Chemical Engineering, University of Jinan, Jinan 250022 (China)

2015-05-30

Highlights: • Toxicity of 4-CP to aerobic granular sludge process was evaluated. • 3D-EEM characterized the interaction between EPS and 4-CP. • Tryptophan was the main substance result in fluorescence quenching. • The mechanism of fluorescence quenching belongs to static quenching. - Abstract: The main objective of this study was to evaluate the toxicity of 4-chlorophenol (4-CP) to aerobic granular sludge in the process of treating ammonia rich wastewater. In the short-term exposure of 4-CP of 5 and 10 mg/L, ammonia nitrogen removal efficiencies in the batch reactors decreased to 87.18 ± 2.81 and 41.16 ± 3.55%, which were remarkably lower than that of control experiment (99.83 ± 0.54%). Correspondingly, the respirometric activities of heterotrophic and autotrophic bacteria of aerobic granular sludge were significantly inhibited in the presence of 4-CP. Moreover, the main components of extracellular polymeric substances (EPS) including polysaccharides and proteins increased from 18.74 ± 0.29 and 22.57 ± 0.34 mg/g SS to 27.79 ± 0.51 and 24.69 ± 0.38 mg/g SS, respectively, indicating that the presence of 4-CP played an important role on the EPS production. Three-dimensional excitation-emission matrix (3D-EEM) fluorescence spectroscopy further showed that the intensities of EPS samples were obviously quenched with the increased of 4-CP concentrations. To be more detailed, synchronous fluorescence spectra indicated that the interaction between EPS and 4-CP was mainly caused by tryptophan residues. The mechanism of fluorescence quenching belongs to static quenching with a formation constant (K{sub A}) of 0.07 × 10{sup 4} L/mol, implying the strong formation of EPS and 4-CP complex. The results could provide reliable and accurate information to determine the potential toxicity of 4-CP on the performance of aerobic granular sludge system.

Wage discrimination against foreign workers in Russia

Directory of Open Access Journals (Sweden)

Elena Vakulenko

2017-03-01

Full Text Available We try to determine with the help of the Oaxaca–Blinder decomposition technique whether foreign workers are discriminated against in Russia. We use the Russian Ministry of Labor (Rostrud data on migrants’ applications and the Russian Longitudinal Monitoring Survey (RLMS, provided by the Higher School of Economics for the period 2009–2013. We show that there is significant discrimination against foreign workers. The average salary of Russian workers with the same level of productivity as migrants exceeds migrants’ average salary by 40%. The industries in which the workers are employed have made most substantial contribution to the discrimination gap. Moreover, there is evidence that the lower salaries of foreign workers do not reduce the salaries of Russians employed in similar positions.

Comparison of Employer Productivity Metrics to Lost Productivity Estimated by Commonly Used Questionnaires.

Science.gov (United States)

Gardner, Bethany T; Dale, Ann Marie; Buckner-Petty, Skye; Van Dillen, Linda; Amick, Benjamin C; Evanoff, Bradley

2016-02-01

The aim of the study was to assess construct and discriminant validity of four health-related work productivity loss questionnaires in relation to employer productivity metrics, and to describe variation in economic estimates of productivity loss provided by the questionnaires in healthy workers. Fifty-eight billing office workers completed surveys including health information and four productivity loss questionnaires. Employer productivity metrics and work hours were also obtained. Productivity loss questionnaires were weakly to moderately correlated with employer productivity metrics. Workers with more health complaints reported greater health-related productivity loss than healthier workers, but showed no loss on employer productivity metrics. Economic estimates of productivity loss showed wide variation among questionnaires, yet no loss of actual productivity. Additional studies are needed comparing questionnaires with objective measures in larger samples and other industries, to improve measurement methods for health-related productivity loss.

Comparison of employer productivity metrics to lost productivity estimated by commonly used questionnaires

Science.gov (United States)

Gardner, Bethany T.; Dale, Ann Marie; Buckner-Petty, Skye; Van Dillen, Linda; Amick, Benjamin C.; Evanoff, Bradley

2016-01-01

Objective To assess construct and discriminant validity of four health-related work productivity loss questionnaires in relation to employer productivity metrics, and to describe variation in economic estimates of productivity loss provided by the questionnaires in healthy workers. Methods 58 billing office workers completed surveys including health information and four productivity loss questionnaires. Employer productivity metrics and work hours were also obtained. Results Productivity loss questionnaires were weakly to moderately correlated with employer productivity metrics. Workers with more health complaints reported greater health-related productivity loss than healthier workers, but showed no loss on employer productivity metrics. Economic estimates of productivity loss showed wide variation among questionnaires, yet no loss of actual productivity. Conclusions Additional studies are needed comparing questionnaires with objective measures in larger samples and other industries, to improve measurement methods for health-related productivity loss. PMID:26849261

75 FR 11920 - Agilent Technologies, Eesof Division, Including On-Site Leased Workers From Volt and Managed...

Science.gov (United States)

2010-03-12

... workers of the subject firm. The workers are engaged in the production of electronic design automation software and related services including quality assurance and learning products, marketing, product development, marketing and administration. The company reports that on-site leased workers from Managed...

Performance/design criteria review advanced worker protection systems. Topical report

Energy Technology Data Exchange (ETDEWEB)

NONE

1996-08-01

The Department of Energy (DOE) is in the process of defining the magnitude and diversity of Decontamination and Decommissioning (D&D) obligations at its numerous sites. Several technologies are being investigated which can potentially reduce D&D costs while providing appropriate protection to DOE workers. The DOE recognizes that traditional methods used by the EPA in hazardous waste site clean up activities are insufficient to provide the needed protection and worker productivity demanded by DOE D&D programs. As a consequence, new clothing and equipment which can adequately protect workers while providing increases in worker productivity are being sought for implementation at DOE sites. This document describes an Advanced Worker Protection System (AWPS). The AWPS is built around a life support backpack that uses liquid air to provide cooling as well as breathing gas to the worker. The backpack will be combined with a variety of articles of protective clothing and support equipment.

Performance/design criteria review advanced worker protection systems. Topical report

International Nuclear Information System (INIS)

1996-08-01

The Department of Energy (DOE) is in the process of defining the magnitude and diversity of Decontamination and Decommissioning (D ampersand D) obligations at its numerous sites. Several technologies are being investigated which can potentially reduce D ampersand D costs while providing appropriate protection to DOE workers. The DOE recognizes that traditional methods used by the EPA in hazardous waste site clean up activities are insufficient to provide the needed protection and worker productivity demanded by DOE D ampersand D programs. As a consequence, new clothing and equipment which can adequately protect workers while providing increases in worker productivity are being sought for implementation at DOE sites. This document describes an Advanced Worker Protection System (AWPS). The AWPS is built around a life support backpack that uses liquid air to provide cooling as well as breathing gas to the worker. The backpack will be combined with a variety of articles of protective clothing and support equipment

Telecommuting: The Wired Worker.

Science.gov (United States)

Nilles, Jack M.

1982-01-01

Examines the use of home computers and how they allow the worker to work at home rather than commuting. Discusses the growing trend of telecommuting, cost of operation, how it will affect company structure, and productivity. (CT)

Contact Dermatitis In Automobile Repair workers

Directory of Open Access Journals (Sweden)

Joshi M P

1997-01-01

Full Text Available Automobile repair workers are at risk of developing skin morbidity including occupational dermatoses because of their exposure to mineral oils, petroleum products and its derivatives and lubricating oil. This cross- sectional study was carried out at Maharashtra State Road Transport Corporation workshops in Nagpur city to investigate prevalence of skin morbidity including contact dermatitis in automobile repair workers. The study included 288 (49.9% automobile repair workers 180 (31.3% workshop office staff and 109 (18.8% divisional office employees. Dermatitis was the commonest skin morbidity in all the study subjects and it was significantly more prevalent in automobile repair workers. Folliculitis was detected in 13.2% of auto â€" repair workers and was not seen in the other two groups. Increasing trend of skin morbidity was correlated with the length of service of employees. Proper protective measures along with suitable washing facilities should be provided

Mortality study of lead workers

Energy Technology Data Exchange (ETDEWEB)

Cooper, W C; Gaffey, W R

1975-01-01

The mortality of 7,032 men employed for one or more years in lead production facilities or battery plants was followed over a 23-year period, 1947-70. Lead absorption in many of these men was greatly in excess of currently accepted standards based upon urinary and blood lead concentrations available for a portion of the group. There were 1,356 deaths reported. The standardized mortality ratio (SMR) for all causes was 107 for smelter workers and 99 for battery plant workers. Death from neoplasms were in slight excess in smelters, but not significantly increased in battery plants. There were no excess deaths from kidney tumors. The SMR for cardiovascular-renal disease was 96 for smelter workers and 101 for battery plant workers. There was definitely no excess in deaths from either stroke or hypertensive heart disease; however, deaths classified as other hypertensive disease and unspecified nephritis or renal sclerosis were higher than expected. The life expectancy of lead workers was calculated to be approximately the same as that of all U.S. males.

Unmasking the enterprising nurse: migrant care workers and the discursive mobilisation of productive professionals.

Science.gov (United States)

Olakivi, Antero

2017-03-01

Public care work organisations in Northern Europe often seek to increase their economic efficiency in ways that care workers criticise for reducing both their professional autonomy and the quality of care. Recently, the ideal of 'enterprising nursing' has emerged as a political belief according to which economic efficiency, care workers' autonomy and the quality of care can be improved in tandem by cultivating care workers' agential abilities. This article examines the reception of this belief among migrant care workers in Finland. Drawing on research interviews, the analysis demonstrates how migrant care workers may have difficulties in aligning themselves with the enterprising ideals but also in protesting them. Ethnicity, and the status of a migrant, can offer resources for both constructing enterprising subjectivities and reframing care workers' agency, and their organisational environment, in more critical terms. © 2016 Foundation for the Sociology of Health & Illness.

[Calculation of workers' health care costs].

Science.gov (United States)

Rydlewska-Liszkowska, Izabela

2006-01-01

In different health care systems, there are different schemes of organization and principles of financing activities aimed at ensuring the working population health and safety. Regardless of the scheme and the range of health care provided, economists strive for rationalization of costs (including their reduction). This applies to both employers who include workers' health care costs into indirect costs of the market product manufacture and health care institutions, which provide health care services. In practice, new methods of setting costs of workers' health care facilitate regular cost control, acquisition of detailed information about costs, and better adjustment of information to planning and control needs in individual health care institutions. For economic institutions and institutions specialized in workers' health care, a traditional cost-effect calculation focused on setting costs of individual products (services) is useful only if costs are relatively low and the output of simple products is not very high. But when products form aggregates of numerous actions like those involved in occupational medicine services, the method of activity based costing (ABC), representing the process approach, is much more useful. According to this approach costs are attributed to the product according to resources used during different activities involved in its production. The calculation of costs proceeds through allocation of all direct costs for specific processes in a given institution. Indirect costs are settled on the basis of resources used during the implementation of individual tasks involved in the process of making a new product. In this method, so called map of processes/actions consisted in the manufactured product and their interrelations are of particular importance. Advancements in the cost-effect for the management of health care institutions depend on their managerial needs. Current trends in this regard primarily depend on treating all cost reference

The effect of sex-allocation biasing on the evolution of worker policing in hymenopteran societies

OpenAIRE

Foster, K.R.; Ratnieks, F.L.W.

2001-01-01

Mutual policing is thought to be important in conflict suppression at all levels of biological organization. In hymenopteran societies (bees, ants, and wasps), multiple mating by queens favors mutual policing of male production among workers (worker policing). However, worker policing of male production is proving to be more widespread than predicted by relatedness patterns, occurring in societies headed by single-mated queens in which, paradoxically, workers are more related to the workers' ...

Photocatalytic activity of V doped ZnO nanoparticles thin films for the removal of 2- chlorophenol from the aquatic environment under natural sunlight exposure.

Science.gov (United States)

Salah, Numan; Hameed, A; Aslam, M; Babkair, Saeed S; Bahabri, F S

2016-07-15

Vanadium doped ZnO powders were used as precursors to deposit thin films of V(5+) incorporated ZnO nanoparticles on glass substrates by the pulsed laser deposition technique. The observed variations in Raman signals, visible region shift in the diffuse reflectance spectra along with a small shift in the (101) reflections of the X-ray diffraction (XRD) confirmed the insertion of V(5+) ions in ZnO lattice. No other additional reflection in the XRD results other than ZnO further endorsed the occupation of lattice positions by V entities rather than independent oxide formation. The asymmetric XPS peaks of Zn2p and V2p core levels confirmed the existence of both in the vicinity. The existence of minimal proportion of V(3+) along with V(5+) states varied the alteration of the oxidation states V in the synthetic route. The SEM images at various resolutions displayed the uniform distribution identical nanoparticles without the presence of additional phases in the deposited films. The SEM cross-section measurements revealed the uniform thickness of ∼90 nm of each film, whereas the surface studies of the films were performed by AFM. The as-synthesized films were tested for photocatalytic activity in sunlight illumination for the removal of 2-chlorophenol. The unique feature of the study was the estimation of the photocatalytic activity 20 ppm of 2-chlorophenol by exposing the low exposed area. The degradation of the substrate was measured by liquid phase UV-vis spectroscopy, whereas total organic carbon measurement revealed the mineralization of the substrate. The released Cl(-) ions were also measured by ion chromatography. The estimated flatband potentials and pHzpc values of the V doped materials, by Mott-Schottky analysis and zeta potential measurements respectively, were correlated with the photocatalytic activity. The kinetics of the photocatalytic degradation/mineralization process was estimated and results were correlated with the plausible mechanism. Copyright �

SILAR BiOI-Sensitized TiO2 Films for Visible-Light Photocatalytic Degradation of Rhodamine B and 4-Chlorophenol.

Science.gov (United States)

Odling, Gylen; Robertson, Neil

2017-04-05

BiOI nanoplates were deposited upon a film of TiO 2 nanoparticles derived from a commercial source using a simple room temperature sequential ionic layer adsorption and reaction (SILAR) method. X-ray diffraction, X-ray photoelectron spectroscopy and electron microscopies have been used to confirm the crystal phase, chemical states of key elements and morphology of the BiOI nanoplate-TiO 2 composites. Using both valence band X-ray photoelectron spectroscopy and UV/Vis diffuse reflectance measurements the band structure of the composites is determined to be that of a type II heterojunction. Through initial screening of the photocatalytic activity of the SILAR-modified films it was determined that five SILAR cycles are optimal in the photocatalytic degradation of rhodamine B. The visible-light sensitisation effect of BiOI was then proven by examination of the photocatalytic degradation of the colourless organic pollutant 4-chlorophenol, showing a large enhancement over an equivalent TiO 2 film. © 2017 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

Reproductive conflict in social insects: Male production by workers in a slave-making ant

DEFF Research Database (Denmark)

Brunner, Elizabeth; Trindl, Andreas; Falk, Karl H.

2005-01-01

by producing their own sons than workers in nonparasitic species. In this study we investigated worker reproduction in four natural colonies of the slave-making ant Polyergus rufescens, using highly variable microsatellite markers. Our results show that workers produce up to 100% of the males. This study thus...

Occupational risks for health of the workers of the chemical complex

Directory of Open Access Journals (Sweden)

E.T. Valeyeva

2016-09-01

Full Text Available The article summarizes the materials of long-term studies to assess the working conditions, state of health in workers of the chemical industry - mainly manufacturers of ethylbenzene, styrene, olefin oxides, rocket fuel. It was found that the most adverse working conditions are typical for the production of heptyl, rubber and fiberglass. The causal relationships of working conditions in the form of an increased incidence of early (pre-clinical stages of occupational diseases, as well as major chronic non-communicable diseases, are identified. It is shown that depending on the tropism, mechanism of action and intensity of the chemical factor a clear staging of the development of pathological changes in the body is recorded. A very high degree of professional conditionality of early toxic hepatitis stages (biliary dyskinesia in a heptyl production operator was determined, as well as initial manifestations of autonomic-sensory polyneuropathy in hands of the workers splicing rubber products, specific changes of the hand skin in glass production operators. Production-related diseases with a high degree of conditionality in certain categories of workers include diseases of the musculoskeletal system; hypertension had an average degree of conditionality. During in-depth medical examination of 2411 workers it was found that the largest number of healthy individuals were identified in the bulk manufacture of ethylbenzene – styrene (54.7 %, and olefin oxide (35,0 % of the number of inspected workers, the least number (12 % – in the manufacture of rubber products. The remaining workers demonstrated the pathology of various organs and systems. Based on the results of risk assessment and professional damage to the workers’ health the chemical productions are ranked according to their degree of danger, a system of preventive measures and risk management principles has been developed. The programme implementation resulted in the positive effect of more

Short-Term Efficacy of a "Sit Less, Walk More" Workplace Intervention on Improving Cardiometabolic Health and Work Productivity in Office Workers.

Science.gov (United States)

Lin, Yun-Ping; Lin, Chiu-Chu; Chen, Meei-Maan; Lee, Kwo-Chen

2017-03-01

The aim of this study was to test the short-term efficacy of the Sit Less, Walk More (SLWM) workplace intervention. This was a quasi-experimental design. A total of 99 office workers from two workplaces participated in this study. The 12-week intervention included five components: monthly newsletters, motivational tools, pedometer challenge, environmental prompts, and walking route. The comparison group received monthly newsletters only. Generalized estimating equation analyses showed that the intervention group demonstrated significant improvements in weight (P = 0.029), waist circumference (P = 0.038), diastolic blood pressure (P workplace intervention can improve worker health and lost-productivity.

Sleep, immunity and shift workers: A review

Directory of Open Access Journals (Sweden)

Carlos Mauricio Oliveira de Almeida

2016-07-01

Full Text Available To date, shift workers represent between 15% and 25% of the modern day workforce. Work time poses a great challenge to workers as it requires that they balance productivity and sleep time between shifts. As a result, these workers experience chronic sleep deprivation with increased fatigue and drowsiness due to this sleep deprivation. The impact of this kind of work on the immune system is not yet known. We conducted a literature review with the aim of evaluating articles on this specific type of work's effects on sleep and immunity.

Effect of operational factors on bioregeneration of binary phenol and 4-chlorophenol-loaded granular activated carbon using PVA-immobilized biomass cryogels.

Science.gov (United States)

Leong, Kwok-Yii; Adnan, Rohana; Lim, Poh-Eng; Ng, Si-Ling; Seng, Chye-Eng

2017-09-01

The effects of dry biomass density in cryogel beads, shaking speed and initial concentration ratio of phenol to 4-chlorophenol (4-CP) on the bioregeneration efficiencies of binary phenol and 4-CP-loaded granular activated carbon (GAC) for phenol and 4-CP, respectively, were investigated under the simultaneous adsorption and biodegradation approach. The results revealed higher bioregeneration efficiencies of binary-loaded GAC for phenol and 4-CP at higher dry biomass density but moderate shaking speed. The optimum dry biomass density in cryogel beads and shaking speed for use in bioregeneration were found to be 0.01 g/mL and 250 rpm, respectively. With respect to the initial phenol to 4-CP concentration ratio, the bioregeneration efficiencies were lower under increasing phenol and 4-CP initial concentrations, respectively, with the effect being more conspicuous under increasing 4-CP concentration. Higher bioregeneration efficiencies were achieved with the use of immobilized rather than suspended biomasses.

Work activities and workers' health in broiler production: a case study

Directory of Open Access Journals (Sweden)

M do CB de Alencar

2009-06-01

Full Text Available The objective of this study was to investigate the prevalence of health related symptoms and to analyze the work activities of workers in contracted non-mechanized broiler farms in two regions of the state of Paraná in order to determine possible factors associated to those symptoms. The methods consisted in selecting the houses and the workers, and to apply a questionnaire that included demographic data, questions related to work, the Nordic Questionnaire for Musculoskeletal Symptoms, other symptoms (runny nose, skin itching, throat and eye irritation. In addition, workers were asked if they enjoyed their job, if the supervisor motivated them to work, and if they were afraid to lose their job. Activities were submitted to systematic observations, adapted from Ergonomics, and the loads carried were analyzed and some instruments weighted. The study included 80 workers of both genders between 16 and 59 years, being 40 from each region. There were evidences of low back pain risk in the activities of filling drinkers and washing bell drinkers, with a higher prevalence in region A, where automated systems were less frequently used. The study suggests that mechanized filling of feeders, and the use of nipple drinkers may prevent health problems. It was also found that psychosocial aspects were associated to musculoskeletal symptoms. Promoting better working conditions is essential, as these aspects can affect human behavior at work.

Risk factors causing evolvement of alimentary-dependent diseases in specific groups of workers employed at metallurgy production and prevention meausres development

Directory of Open Access Journals (Sweden)

Yu.V. Danilova

2017-03-01

Full Text Available The article gives the results of hygienic and epidemiologic research of morbidity, nutrition structure, food stuffs safety, working conditions, and actual nutrition of workers employed at metallurgy productions. The research was carried out at "Magnitogorskiy metallurgy plant" PLC. 1208 steel workers and founders made up the main group. Average age of research participants amounted to 40.0 ± 0.75. The sampling was representative. We studied actual nutrition over 2010–2015 via analyzing food consumption frequency and applying extended base of food stuffs chemical structure and analyzing menus with lists of dishes offered for an organized group nutrition. We assessed both qualitative and quantitative parameters, including consumption of basic nutrients, energy, irreplaceable amino acids, lipids, vitamins, dietary fiber, essential and conditionally essential microbiological elements (60 nutrients totally, allowing for losses on a product peeling, edible contents, and other losses occurring at various treatments during cooking. We also assessed nutrition regime and other nutrition features. We detected that ratio between proteins, fats and carbohydrates was the evidence of mostly fat nutrition type. Workers were found to consume insufficient quantity of certain vitamins (A, D, and folic acid and biological elements (calcium, but they instead consumed excessive quantities of saturated fats and common salt. It is shown that actual nutrition of specific workers' groups at metallurgy production is not rational, imbalanced, and doesn't satisfy body needs causing risks of nutrition state shifts and alimentary-dependent diseases evolvement. Alimentary-dependent diseases on average amounted to 21.6 % in the total morbidity structure in 2010–2015. 10.0 % of all diseases with temporary working disability are diseases determined by mostly nutrition factor. Epidemiologic analysis of morbidity comprising diseases related to non-rational nutrition enabled us

Natural Hematite and Siderite as Heterogeneous Catalysts for an Effective Degradation of 4-Chlorophenol via Photo-Fenton Process

Directory of Open Access Journals (Sweden)

Haithem Bel Hadjltaief

2018-06-01

Full Text Available This paper describes a simple and low-cost process for the degradation of 4-Chlorophenol (4-CP from aqueous solution, using natural Tunisian Hematite (M1 and Siderite (M2. Two natural samples were collected in the outcroppings of the Djerissa mining site (Kef district, northwestern Tunisia. Both Hematite and Siderite ferrous samples were characterized using several techniques, including X-Ray Diffraction (XRD, Nitrogen Physisorption (BET, Infrared Spectroscopy (FTIR, H2-Temperature Programmed Reduction (H2-TPR, Scanning Electronic Microscopy (SEM linked with Energy Dispersive X-ray (EDS and High-Resolution Transmission Electron Microscopy (HRTEM. Textural, structural and chemical characterization confirmed the presence of Hematite and Siderite phases with a high amount of iron on the both surface materials. Their activity was evaluated in the oxidation of 4-CP in aqueous medium under heterogeneous photo-Fenton process. Siderite exhibited higher photocatalytic oxidation activity than Hematite at pH 3. The experimental results also showed that 100% conversion of 4-CP and 54% TOC removal can be achieved using Siderite as catalyst. Negligible metal leaching and catalyst reutilization without any loss of activity point towards an excellent catalytic stability for both natural catalysts.

Beyond return to work from sickness absence due to mental disorders : 5-year longitudinal study of employment status among production workers

NARCIS (Netherlands)

Norder-Kuper, Giny; van der Ben, Claartje A; Roelen, Corne A. M.; Heymans, Martijn W.; van der Klink, Jac J. L.; Bultmann, Ute

2017-01-01

Background: Mental disorders are increasing and account for one-third of all disability benefits in OECD countries. This study investigated the work status after mental sickness absence (SA). Methods: Five-year longitudinal cohort study of 6678 male production workers. Work status, work schedule and

[Changes in the peripheral blood of workers engaged in ethylbenzene-styrene and synthetic rubber and latex manufacture].

Science.gov (United States)

Khristeva, V

1986-01-01

A total of 67 workers were examined from the production of "Ethyl benzene-styrene" and 184 workers from the production of "Synthetic rubber and latex", as well as a control group of 59 employees. The workers from the first production are exposed to the effect of styrene, ethyl benzene and toluene. The concentrations of the substances surpass MAC, with several times, at the majority of the working places. The workers with a length of service over 10 years predominate. The workers from the second production are exposed to the combined effect of styrene and divinyl, their concentrations fluctuating from 2 to 8 times over MAC. The workers with a length of service over 10 years are 71.7%. The deviations, established in the hematological indices studied are compared with the results from a study on the workers from those productions of 6 years ago. Dynamics in the changes was established among the workers from the production of "Synthetic rubber and latex", associated with the duration of occupational exposure to styrene and divinyl. In case of a shorter length of service, the deviations are functional (reduction of peroxidase activity in granulocytes), increase of hemoglobin and hematocrit, associated with the adaptive reaction of organism. Pronounced anemic syndrome was established in a considerable number (24 workers) after an exposure of 10 years as well as lymphocytosis (35 subjects) and leukopenia (9 subjects).

Russian oil workers seek employment abroad

International Nuclear Information System (INIS)

Anon.

1992-01-01

This paper reports that American oil workers discouraged by bleak employment opportunities in the U.S. petroleum industry face increasing competition abroad from Russians seeking a living wage. Moscow's Zagrantrud (Foreign Labor) firm believes millions of Russian skilled and unskilled workers in many occupations will try to find jobs in other countries. The Russian enterprise says it is selecting a group of construction workers to build a refinery in Columbia. Kuwait also wants Russian construction personnel. Russia is especially eager to find overseas work for petroleum industry workers who have lost their jobs in Viet Nam and Cuba. The number of specialists from the former U.S.S.R. in Cuba, many of them engaged in oil exploration and production or pipeline and refinery construction, has fallen from several thousand 2 years ago to 250 at present as Moscow's relations with Havana cooled

[Occupational asthma and rhinitis caused by colophony among linoleum production workers].

Science.gov (United States)

Pace, M L; Tacconi, C; Silvestrelli, A; Bussetti, A; Siracusa, A

2003-01-01

According to act 626/1994, employers have the duty to inform and train workers and their representatives. The implementation of training activities requires the following points: planning the training progra according to the needs of the target population, use of the methods aimed at promoting learning and the adoption of safe behaviour, setting-up of evaluation tools. The disciplines of risk perception and communication and adult training may provide useful contribution in this frame. At the light of the preliminary experiences in this field, the importance of the following items for workers, workers representatives and employers is emphasized; probabilistic causality models, role of cognitive and emotional factors in the learning process, definition of carcinogenic according to national and internationals organisation, meaning of TLV with respect to carcinogenic exposure, interaction between carcinogens in the case of multiple exposition, risk evaluation, preventive measures, transfer of carcinogen risk from workplace to domestic environment, due to lack of compliance with basic hygienic rules such proper use of work clothes.

76 FR 62451 - Avon Products, Inc., Including On-Site Leased Workers From Spherion/Source Right, Springdale...

Science.gov (United States)

2011-10-07

...., Including On-Site Leased Workers From Spherion/Source Right, Springdale, Ohio; Amended Certification... workers of the subject firm. The company reports that workers leased from Spherion/Source Right were...., including on-site leased workers from Spherion/Source Right, Springdale, Ohio, who became totally or...

Formation of secondary products in water purification. ; Toxicological evaluation of mutagenic chlorination by-products during drinking water treatment. Josui shori ni okeru fukuseiseibutsu. ; Josui shori ni okeru hen'i genseibusshitsu no dokusei hyoka

Energy Technology Data Exchange (ETDEWEB)

Nakamuro, K [Setsunan Univ., Osaka (Japan). Faculty of Pharmaceutical Sciences; Sayato, Y [Setsunan Univ., Osaka (Japan)

1993-12-10

The biological effects of acute toxicity, chronic toxicity, carcinogenicity, etc. of chlorination by-products detected in drinking water in Japan are discussed. The biological effects of representative chlorination by-products such as trihalomethane, haloacetic acid, haloaldehyde, haloacetonitrile, chlorophenol, chloropicrin, etc. as well as the evaluation of mutagenicity in drinking water purification process, for which Ames Salmonella/microsome assay is used for safety evaluation of drinking water, are discussed. The extent of the contribution of mutagenicity of chlorination disinfection by-products to the mutagenicity of drinking water is investigated. It must be admitted that biological evaluation of the safety of water quality is impossible currently by using only the known chemical substances contained in drinking water. The effects of chlorination and ozone treatment which are often applied to drinking water treatment are different each other. 58 refs., 1 fig., 4 tabs.

Greater loss of productivity among Japanese workers with gastro-esophageal reflux disease (GERD) symptoms that persist vs resolve on medical therapy.

Science.gov (United States)

Suzuki, H; Matsuzaki, J; Masaoka, T; Inadomi, J M

2014-06-01

Gastro-esophageal reflux disease (GERD) impairs quality of life; however, the association between GERD and work productivity has not been well investigated in Japan. This study was designed to compare the impact of GERD on productivity between Japanese workers with GERD symptoms that persisted vs resolved on medical therapy. A cross-sectional Web-based survey was conducted in workers. The impact of GERD on work and daily productivity was evaluated using a Web-reported Work Productivity and Activity Impairment Questionnaire for patients with GERD and a GERD symptom severity Questionnaire. Demographic information, clinical history, and satisfaction with GERD medication were also ascertained. A total of 20 000 subjects were invited to the survey. After the exclusion of patients with a history of gastrointestinal (GI) malignancy, peptic ulcer, upper GI surgery, and unemployment, 650 participants were included in the analysis. Participants with persistent GERD symptoms reported a significantly greater losses of work productivity (11.4 ± 13.4 h/week), absenteeism (0.7 ± 3.1 h/week), presenteeism (10.7 ± 12.6 h/week), costs (20 100 ± 26 800 JPY/week), and lower daily productivity (71.3% [95% confidence interval, 69.0-73.7]) than those whose symptoms were alleviated with medications. The level of dissatisfaction with GERD medications among participants with persistent GERD symptoms was significantly correlated with loss of work and daily productivity (p < 0.001). GERD places a significant burden on work and daily productivity despite medical therapy. Ineffective GERD therapy is associated with greater productivity loss. © 2014 John Wiley & Sons Ltd.

Penicillin dust exposure and penicillin resistance among pharmaceutical workers in Tehran, Iran.

Science.gov (United States)

Farshad, Ali Asghar; Enferadi, Mojtaba; Bakand, Shahnaz; Jamshidi Orak, Rouhangiz; Mirkazemi, Roksana

2016-07-01

Antimicrobial resistance (AMR) adversely impacts the prevention and treatment of a wide range of infections and is considered as a serious threat to global public health. Occupational-related AMR is a neglected area of research. To assess exposure to penicillin dust, penicillin active materials, and to report the frequency of penicillin resistance among pharmaceutical workers in Tehran, Iran. A quasi-experimental study was conducted among workers on a penicillin production line in a pharmaceutical company (n = 60) and workers in a food producing company (n = 60). Data were collected via survey, air sampling, and throat swab. The mean overall concentrations of penicillin dust and penicillin active material were 6.6 and 4.3 mg/m 3 , respectively, in the pharmaceutical industry. Streptococcus pneumoniae (S. pneumoniae) was detected in 45% (27) individuals in the exposed group, 92.6% of which showed penicillin resistance. Resistance was significantly higher among workers in penicillin production line (p = 0.014). High level of AMR among workers in penicillin production line is a health risk for the workers as well as society as a whole through the spread of drug resistant micro-organisms.

Personal exposure to inhalable cement dust among construction workers.

NARCIS (Netherlands)

Peters, S.M.; Thomassen, Y.; Fechter-Rink, E.; Kromhout, H.

2009-01-01

Objective- A case study was carried out to assess cement dust exposure and its determinants among construction workers and for comparison among workers in cement and concrete production.Methods- Full-shift personal exposure measurements were performed and samples were analysed for inhalable dust and

Optimization of Temperature Level to Enhance Worker Performance in Automotive Industry

OpenAIRE

A. R. Ismail; M. Y.M. Yusof; N. K. Makhtar; B. M. Deros; M. R.A. Rani

2010-01-01

Problem statement: Production of automotive parts is among the largest contributor to economic earnings in Malaysia. The dominant work involve in producing automotive part were manual assembly process. Where it is definitely used a manpower capability. Thus the quality of the product heavily depends on workers comfort in the working condition. Temperature is one of the environmental factors that give significant effect on the worker performance. Approach: Temperature level and productivity ra...

78 FR 37586 - TE Connectivity, CIS-Appliances Division, Including On-Site Leased Workers From Kelly Services...

Science.gov (United States)

2013-06-21

... supply of administrative support services (in support of production). The worker group includes on-site... components produced by the subject workers. Further, aggregate imports of articles like or directly... reconsideration, the worker supplied new information regarding a possible shift in the production of like or...

Enzymatic removal of phenol and p-chlorophenol in enzyme reactor: Horseradish peroxidase immobilized on magnetic beads

International Nuclear Information System (INIS)

Bayramoglu, Guelay; Arica, M. Yakup

2008-01-01

Horseradish peroxidase was immobilized on the magnetic poly(glycidylmethacrylate-co-methylmethacrylate) (poly(GMA-MMA)), via covalent bonding and used for the treatment of phenolic wastewater in continuous systems. For this purposes, horseradish peroxidase (HRP) was covalently immobilized onto magnetic poly(GMA-MMA) beds using glutaraldehyde (GA) as a coupling agent. The maximum HRP immobilization capacity of the magnetic poly(GMA-MMA)-GA beads was 3.35 mg g -1 . The immobilized HRP retained 79% of the activity of the free HRP used for immobilization. The immobilized HRP was used for the removal of phenol and p-chlorophenol via polymerization of dissolved phenols in the presence of hydrogen peroxide (H 2 O 2 ). The effect of pH and temperature on the phenol oxidation rate was investigated. The results were compared with the free HRP, which showed that the optimum pH value for the immobilized HRP is similar to that for the free HRP. The optimum pH value for free and immobilized HRP was observed at pH 7.0. The optimum temperature for phenols oxidation with immobilized HRP was between 25 and 35 deg. C and the immobilized HRP has more resistance to temperature inactivation than that of the free form. Finally, the immobilized HRP was operated in a magnetically stabilized fluidized bed reactor, and phenols were successfully removed in the enzyme reactor

[Sanitary education of workers of bakeries and pastry enterprises].

Science.gov (United States)

Krasil'shchikov, M I; Nemets, M G; Novikova, O V; Gavrilenko, E V; Osipova, E M; Osinova, T I

2000-01-01

The paper presents experience with sanitary education of workers from food industrial enterprises. The study revealed a number of disadvantages of the methodological aspect of sanitary education of these workers. A sanitary education programme has been worked out for workers engaged in food and food processing industries (production of bread, baked goods, and confectionery) and approved by the State Sanitary and Epidemiological Surveillance Department), Ministry of Health of Russia on March 1999.

Betel-quid and alcohol use were associated with lipid accumulation product among male factory workers in Taiwan.

Science.gov (United States)

Huang, Chih-Fang; Chen, Chao-Tung; Wang, Pei-Ming; Koo, Malcolm

2015-05-01

In this study, cardiometabolic risk associated with betel-quid, alcohol and cigarette use, based on a simple index-lipid accumulation product (LAP), was investigated in Taiwanese male factory workers. Male factory workers were recruited during their annual routine health examination at a hospital in south Taiwan. The risk of cardiometabolic disorders was estimated by the use of LAP, calculated as (waist circumference [cm]-65)×(triglyceride concentration [mmol/l]). Multiple linear regression analyses were conducted to assess the risk factors of natural logarithm-transformed LAP. Of the 815 participants, 40% (325/815) were current alcohol users, 30% (248/815) were current smokers and 7% (53/815) were current betel-quid users. Current betel-quid use, alcohol use, older age, lack of exercise and higher body mass index were found to be significant and independent factors associated with natural logarithm-transformed LAP. Betel-quid and alcohol, but not cigarette use, were independent risk factors of logarithm-transformed LAP, adjusting for age, exercise and body mass index in male Taiwanese factory workers. LAP can be considered as a simple and useful method for screening of cardiometabolic risk. © The Author 2014. Published by Oxford University Press on behalf of Royal Society of Tropical Medicine and Hygiene. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

Occupational hazards to health of port workers.

Science.gov (United States)

Wang, Yukun; Zhan, Shuifen; Liu, Yan; Li, Yan

2017-12-01

The aim of this article is to reduce the risk of occupational hazards and improve safety conditions by enhancing hazard knowledge and identification as well as improving safety behavior for freight port enterprises. In the article, occupational hazards to health and their prevention measures of freight port enterprises have been summarized through a lot of occupational health evaluation work, experience and understanding. Workers of freight port enterprises confront an equally wide variety of chemical, physical and psychological hazards in production technology, production environment and the course of labor. Such health hazards have been identified, the risks evaluated, the dangers to health notified and effective prevention measures which should be put in place to ensure the health of the port workers summarized. There is still a long way to go for the freight port enterprises to prevent and control the occupational hazards. Except for occupational hazards and their prevention measures, other factors that influence the health of port workers should also be paid attention to, such as age, work history, gender, contraindication and even the occurrence and development rules of occupational hazards in current production conditions.

Economic evaluation of an intervention program with the aim to improve at-work productivity for workers with rheumatoid arthritis.

Science.gov (United States)

Noben, Cindy; Vilsteren, Myrthe van; Boot, Cécile; Steenbeek, Romy; Schaardenburg, Dirkjan van; Anema, Johannes R; Evers, Silvia; Nijhuis, Frans; Rijk, Angelique de

2017-05-25

Evaluating the cost effectiveness and cost utility of an integrated care intervention and participatory workplace intervention for workers with rheumatoid arthritis (RA) to improve their work productivity. Twelve month follow-up economic evaluation alongside a randomized controlled trial (RCT) within specialized rheumatology treatment centers. Adults diagnosed with RA between 18-64 years, in a paid job for at least eight hours per week, experiencing minor difficulties in work functioning were randomized to the intervention (n = 75) or the care-as-usual (CAU) group (n = 75). Effect outcomes were productivity and quality of life (QALYs). Costs associated with healthcare, patient and family, productivity, and intervention were calculated from a societal perspective. Cost effectiveness and cost utility were assessed to indicate the incremental costs and benefits per additional unit of effect. Subgroup and sensitivity analyses evaluated the robustness of the findings. At-work productivity loss was about 4.6 hours in the intervention group and 3.5 hours in the care as usual (CAU) group per two weeks. Differences in QALY were negligible; 0.77 for the CAU group and 0.74 for the intervention group. In total, average costs after twelve months follow-up were highest in the intervention group (€7,437.76) compared to the CAU group (€5,758.23). The cost-effectiveness and cost-utility analyses show that the intervention was less effective and (often) more expensive when compared to CAU. Sensitivity analyses supported these findings. The integrated care intervention and participatory workplace intervention for workers with RA provides gains neither in productivity at the workplace nor in quality of life. These results do not justify the additional costs.

A worker perspective on nuclear safety

International Nuclear Information System (INIS)

Pigeau, T.

2000-01-01

The majority of the 15,000 members of the Power Workers Union (PWU) are employed in electricity production at Ontario Power Generation's nuclear generating stations and in nuclear technology research at the Chalk River Laboratories of Atomic Energy of Canada Limited. Our members therefore have an obvious vested interest in any discussion related to their jobs. Workers in nuclear power plants have a clearly defined responsibility to ensure a safe working environment for themselves and their fellow workers. They have an overwhelming vested interest in ensuring that the plants are constructed, maintained, and operated safely. As will be detailed in the presentation to the CNS, all workers are required to learn and demonstrate knowledge of the hazards as an integral part of employment initiation and subsequent training. As their union, the PWU has a responsibility to ensure conditions of employment that not only permit workers to refuse work they perceive to be unsafe but require them to bring safety concerns forward for resolution to the satisfaction of both management and workers' representatives. The PWU has accomplished this through the development of workplace structures to ensure worker input is sought and acted on. The paper will describe the next steps required to improve workplace safety at Ontario Power Generation, which could be adapted to other facilities and workgroups. (author)

Nutra-ergonomics: influence of nutrition on physical employment standards and the health of workers.

Science.gov (United States)

Shearer, Jane; Graham, Terry E; Skinner, Tina L

2016-06-01

The importance of ergonomics across several scientific domains, including biomechanics, psychology, sociology, and physiology, have been extensively explored. However, the role of other factors that may influence the health and productivity of workers, such as nutrition, is generally overlooked. Nutra-ergonomics describes the interface between workers, their work environment, and performance in relation to their nutritional status. It considers nutrition to be an integral part of a safe and productive workplace that encompasses physical and mental health as well as the long-term wellbeing of workers. This review explores the knowledge, awareness, and common practices of nutrition, hydration, stimulants, and fortified product use employed prior to physical employment standards testing and within the workplace. The influence of these nutra-ergonomic strategies on physical employment standards, worker safety, and performance will be examined. Further, the roles, responsibilities, and implications for the applicant, worker, and the employer will be discussed within the context of nutra-ergonomics, with reference to the provision and sustainability of an environment conducive to optimize worker health and wellbeing. Beyond physical employment standards, workplace productivity, and performance, the influence of extended or chronic desynchronization (irregular or shift work) in the work schedule on metabolism and long-term health, including risk of developing chronic and complex diseases, is discussed. Finally, practical nutra-ergonomic strategies and recommendations for the applicant, worker, and employer alike will be provided to enhance the short- and long-term safety, performance, health, and wellbeing of workers.

Role of iron species in the photo-transformation of phenol in artificial and natural seawater

International Nuclear Information System (INIS)

Calza, Paola; Massolino, Cristina; Pelizzetti, Ezio; Minero, Claudio

2012-01-01

The role played by iron oxides (goethite and akaganeite) and iron(II)/(III) species as photo-sensitizers toward the transformation of organic matter was examined in saline water using phenol as a model molecule. The study was carried out in NaCl 0.7 M solution at pH 8, artificial (ASW) and natural (NSW) seawater, in a device simulating solar light spectrum and intensity. Under illumination phenol decomposition occurs in all the investigated cases. Conversely, dark experiments show that no reaction takes place, implying that phenol transformation is a light- activated process. Following the addition of Fe(II) ions to aerated solutions, Fe(II) is easily oxidized to Fe(III) and hydrogen peroxide is formed. Regardless of the addition of Fe(II) or Fe(III) ions, photo-activated degradation is mediated by Fe(III) species. Several (and different) hydroxylated and halogenated intermediates were identified. In ASW, akaganeite promotes the formation of ortho and para chloro derivatives (2- and 4-chlorophenol, 2,4-dichlorophenol and 2,4,6-trichlorophenol), while goethite induces the formation of 3-chlorophenol and bromophenols. Conversely, Fe(II) or Fe(III) addition causes the formation of 3- and 4-chlorophenol and 2,3- or 3,4-dichlorophenol. 4-Bromophenol was only identified when irradiating Fe(II) spiked solutions. Natural seawater sampled in the Gulf of Trieste, Italy, has been spiked with phenol and irradiated. Phenol photo-induced transformation in NSW mediated by natural photosensitizers occurs and leads to the formation of numerous halophenols, condensed products and nitrophenols. When NSW is spiked with phenol and iron oxides, Fe(II) or Fe(III), halophenols production is enhanced. A close analogy exists between Fe(III), Fe(II)/goethite in ASW and NSW products. Different halophenols production in the natural seawater samples depends on Fe(II)/goethite (above all for 3-chlorophenol, 2,3-dichlorophenol and 4-bromophenol formation) and on Fe(III) colloidal species (3

Identification of occupational mortality risks for Hanford workers

International Nuclear Information System (INIS)

Kneale, G.W.; Mancuso, T.F.; Stewart, A.M.

1984-01-01

Though most of the production work at Hanford is done by manual workers, 46% of the most dangerous jobs are performed by people who have professional or technical qualifications. For these privileged workers occupational mortality risks are positively correlated with radiation doses but for manual workers, who have relatively high death rates, there is an inverse relation with dose. The high ratio of professional to manual workers is clearly the reason for the industry having fewer observed than expected deaths and the inverse relation with dose for less privileged workers is probably a sign that there has been selective recruitment of the most highly paid manual workers-that is, skilled craftsmen into the more dangerous occupations. Evidence of this selective recruitment was obtained by equating danger levels with levels of monitoring for internal radiation. Therefore, there should be some control for these levels in any analysis of cancer effects of the measured dose of radiation. (author)

Migrant Workers in Agriculture: A View from Thailand.

Science.gov (United States)

Thetkathuek, Anamai; Daniell, William

2016-01-01

There has been a dramatic increase in the global movement of workers during the last few decades. As Thailand has developed rapidly over the past 20 years, it has attracted laborers (both authorized and unauthorized) from the neighboring countries of Myanmar, People's Democratic Republic of Lao (Lao PDR), and Cambodia. Given that agriculture has been Thailand's most important industry, its continued growth has been dependent on migrant workers. Both crop agriculture and animal-production agriculture have employed migrant labor. Migrants have been hired to plant, weed, fertilize, spray pesticides, and harvest crops such as rice, corn, sugar cane, and cassava. They have worked at rubber and coffee plantations, as well as in the production of ornamental crops. Also, migrants have labored on pig, beef, and duck farms. There have been numerous documented health problems among migrant workers, including acute diarrhea, malaria, and fever of unknown causes. Occupational illness and injury have been a significant concern, and there has been limited health and safety training. This article reviewed the demographic changes in Thailand, studied the agricultural crops and animal production that are dependent on migrant labor, discussed the health status and safety challenges pertaining to migrant workers in agriculture, and described several recommendations. Among the recommendations, the conclusions of this study have suggested that addressing the cost for health care and solutions to health care access for migrant labor are needed.

Productivity and energy efficiency

Energy Technology Data Exchange (ETDEWEB)

Lovins, H. [Rocky Mountain Inst., Snowmass, CO (United States)

1995-12-31

Energy efficient building and office design offers the possibility of significantly increased worker productivity. By improving lighting, heating and cooling, workers can be made more comfortable and productive. An increase of 1 percent in productivity can provide savings to a company that exceed its entire energy bill. Efficient design practices are cost effective just from their energy savings. The resulting productivity gains make them indispensable. This paper documents eight cases in which efficient lighting, heating, and cooling have measurably increased worker productivity, decreased absenteeism, and/or improved the quality of work performed. They also show that efficient lighting can measurably increase work quality by removing errors and manufacturing defects. The case studies presented include retrofit of existing buildings and the design of new facilities, and cover a variety of commercial and industrial settings. Each case study identifies the design changes that were most responsible for increased productivity. As the eight case studies illustrate, energy efficient design may be one of the least expensive ways for a business to improve the productivity of its workers and the quality of its product. (author). 15 refs.

Musculoskeletal disorders among video display terminal (VDT workers comparing with other office workers

Directory of Open Access Journals (Sweden)

H. Akbari

2010-07-01

Full Text Available Background and aimsScientific and industrial development has led to increased production,which has been associated with different complications, including occupational stress, and increased incidence of work-related musculoskeletal disorders. Musculoskeletal disorders arefrequent causes of absenteeism in developed countries. We designed this study to assess musculoskeletal disorders and occupational stress among video display terminal (VDT workers in comparison with other office workers.MethodsThis was a cross-sectional study on 72 VDT workers (case and 145 office workers (control. In this study we used Nordic and Osipow questionnaires in order to evaluate musculoskeletal disorders and job stress, respectively. The questionnaires were filled by direct interview. T test, chi square, Fisher test and logistic regression were used for data analysis.ResultsThe frequency of musculoskeletal disorders among VDT users in the last 12 months was 46.5%, 20.3%, 5.1%, 12.4% and 57.6% in neck, shoulder, elbow, wrist and low back areas, respectively. The frequency of musculoskeletal complaints in neck, shoulder and wrist and mean score of occupational stress was significantly higher in the case group comparing with controlgroup, and both results were statistically significant.ConclusionVDT working is a high-risk job for musculoskeletal disorders. In this study the frequency of musculoskeletal disorders, especially in high-risk regions for this job, was higher in VDTworkers than other office workers. We recommend to perform other studies in order to find non-ergonomic points and postures in these persons.

The relationship between spontaneous abortion and female workers in the semiconductor industry.

Science.gov (United States)

Kim, Heechan; Kwon, Ho-Jang; Rhie, Jeongbae; Lim, Sinye; Kang, Yun-Dan; Eom, Sang-Yong; Lim, Hyungryul; Myong, Jun-Pyo; Roh, Sangchul

2017-01-01

This study investigated the relationship between job type and the risk for spontaneous abortion to assess the reproductive toxicity of female workers in the semiconductor industry. A questionnaire survey was administered to current female workers of two semiconductor manufacturing plants in Korea. We included female workers who became pregnant at least 6 months after the start of their employment with the company. The pregnancy outcomes of 2,242 female workers who experienced 4,037 pregnancies were investigated. Personnel records were used to assign the subjects to one of three groups: fabrication process workers, packaging process workers, and clerical workers. To adjust for within-person correlations between pregnancies, a generalized estimating equation was used. The logistic regression analysis was limited to the first pregnancy after joining the company to satisfy the assumption of independence among pregnancies. Moreover, we stratified the analysis by time period (pregnancy in the years prior to 2008 vs. after 2009) to reflect differences in occupational exposure based on semiconductor production periods. The risk for spontaneous abortion in female semiconductor workers was not significantly higher for fabrication and packaging process workers than for clerical workers. However, when we stratified by time period, the odds ratio for spontaneous abortion was significantly higher for packaging process workers who became pregnant prior to 2008 when compared with clerical workers (odds ratio: 2.21; 95% confidence interval: 1.01-4.81). When examining the pregnancies of female semiconductor workers that occurred prior to 2008, packaging process workers showed a significantly higher risk for spontaneous abortions than did clerical workers. The two semiconductor production periods in our study (prior to 2008 vs. after 2009) had different automated processes, chemical exposure levels, and working environments. Thus, the conditions prior to 2008 may have increased the

77 FR 13355 - Investigations Regarding Certifications of Eligibility To Apply for Worker Adjustment Assistance

Science.gov (United States)

2012-03-06

... Veritas, Consumer Taunton, MA 02/15/12 02/14/12 Product Services, Inc. (Workers). 81337 Fu Sing Fashion...). 81324 CBS Fashion Inc. (Workers). New York, NY 02/13/12 02/10/12 81325 Sykes Enterprise (Workers...

Effects of office innovation on office workers' health and performance

NARCIS (Netherlands)

Meijer, Eline M.; Frings-Dresen, Monique H. W.; Sluiter, Judith K.

2009-01-01

The implementation of an innovative office concept (e.g. open-plan, flexible workplaces and a paperless office concept) on health and productivity among office workers was evaluated with questionnaires of 138 workers at baseline and 6 and 15 months afterwards. Work-related fatigue, general health,

Parasitic Cape honeybee workers, Apis mellifera capensis, evade policing

Science.gov (United States)

Martin, Stephen J.; Beekman, Madeleine; Wossler, Theresa C.; Ratnieks, Francis L. W.

2002-01-01

Relocation of the Cape honeybee, Apis mellifera capensis, by bee-keepers from southern to northern South Africa in 1990 has caused widespread death of managed African honeybee, A. m. scutellata, colonies. Apis mellifera capensis worker bees are able to lay diploid, female eggs without mating by means of automictic thelytoky (meiosis followed by fusion of two meiotic products to restore egg diploidy), whereas workers of other honeybee subspecies are able to lay only haploid, male eggs. The A. m. capensis workers, which are parasitizing and killing A. m. scutellata colonies in northern South Africa, are the asexual offspring of a single, original worker in which the small amount of genetic variation observed is due to crossing over during meiosis (P. Kryger, personal communication). Here we elucidate two principal mechanisms underlying this parasitism. Parasitic A. m. capensis workers activate their ovaries in host colonies that have a queen present (queenright colonies), and they lay eggs that evade being killed by other workers (worker policing)-the normal fate of worker-laid eggs in colonies with a queen. This unique parasitism by workers is an instance in which a society is unable to control the selfish actions of its members.

76 FR 62452 - Avon Products, Inc. Including On-Site Leased Workers From Spherion/Source Right, Springdale, OH...

Science.gov (United States)

2011-10-07

.... Including On-Site Leased Workers From Spherion/Source Right, Springdale, OH; Amended Certification Regarding... workers of the subject firm. The company reports that workers leased from Spherion/Source Right were...., including on-site leased workers from Spherion/Source Right, Springdale, Ohio, who became totally or...

The Mayak Worker Dosimetry System (MWDS-2013): determination of the individual scenario of inhaled plutonium intake in the Mayak workers

International Nuclear Information System (INIS)

Sokolova, A. B.; Efimov, A. V.; Vostrotin, V. V.; Birchall, A.; Dorrian, M.-D.

2017-01-01

In order to estimate doses of workers exposed to plutonium, it is necessary to make assumptions about both the route and the time course of intake. The objective of this study was to determine a time course for the inhalation rate for plutonium (intake regime) useful for biokinetic modeling. Records from workplace air sampling, personnel biophysical examinations and autopsy data from former Mayak Production Association (MPA) workers were used. Plutonium accumulation strongly correlated with the volumetric activity of plutonium in workplace air. Using data from activity in air at MPA workplaces over time, a three-step function of intake was adopted. The adequacy of this three-step function was tested by comparing predicted doses using more complicated intake regimes. Uncertainties on the three-step function were also characterized based on air sampling data. The three-step function was assumed to be common to all workers, but an individual intake regime for each worker was calculated by convoluting it with the worker's actual employment history. (authors)

Visible-light photoactivity of plasmonic silver supported on mesoporous TiO2 nanoparticles (Ag-MTN) for enhanced degradation of 2-chlorophenol: Limitation of Ag-Ti interaction

Science.gov (United States)

Jaafar, N. F.; Jalil, A. A.; Triwahyono, S.

2017-01-01

Various weight loadings of Ag (1-10 wt.%) were introduced to mesoporous titania nanoparticles (MTN) via a direct in-situ electrochemical method. The catalysts were characterized by XRD, surface area analysis, FTIR, ESR, FESEM-EDX and TEM. Characterization results indicated that the introduction of Ag onto MTN decreased the particles size and band gap of the MTN while increasing the number of oxygen vacancies (OV) and Ti3+ site defects (TSD). The activity performance of Ag-MTN on photodegradation of 2-chlorophenol (2-CP) under visible light irradiation was in the following order: 5 wt% Ag-MTN> 1 wt% Ag-MTN > MTN > 10 wt% Ag-MTN, with degradation percentages of 97, 88, 80 and 63%, respectively. The synergistic effect between Ag0 and MTN seemed to play an important role in the system. The Ag0 acted as both an electron trap and a plasmonic sensitizer which suppressed the electron-hole recombination, while OV and TSD in the MTN accelerated the production of hydroxyl radicals for enhanced degradation of 2-CP. However, the formation of Ti-O-Ag in 10 wt% Ag-MTN was found to decrease the photoactivity due to the decrease in the formation of Ag0, TSD and OV as well as the increase in band gap energy. The photodegradation of 5 wt% Ag-MTN followed a pseudo-first-order Langmuir- Hinshelwood model and the catalyst was still stable after five cycles.

Potential allergy and irritation incidents among health care workers.

Science.gov (United States)

Alamgir, Hasanat; Yu, Shicheng; Chavoshi, Negar; Ngan, Karen

2008-07-01

This study describes the types, causes, and outcomes of potential irritation and allergy incidents among workers in British Columbia's health care industry. Data on occupation-induced allergy and irritation incidents were extracted from a standardized database using the number of productive hours obtained from payroll data as a denominator during a 1-year period from three British Columbia health regions. Younger workers, female workers, facility support service workers, laboratory assistants and technicians, and maintenance and acute care workers were found to be at higher risk for allergy and irritation incidents. Major causes of allergy and irritation incidents included chemicals, blood and body fluids, food and objects, communicable diseases, air quality, and latex. A larger proportion of chemically induced incidents resulted in first aid care only, whereas non-chemical incidents required more emergency room visits.

DNA Damage among Wood Workers Assessed with the Comet Assay

Science.gov (United States)

Bruschweiler, Evin Danisman; Wild, Pascal; Huynh, Cong Khanh; Savova-Bianchi, Dessislava; Danuser, Brigitta; Hopf, Nancy B.

2016-01-01

Exposure to wood dust, a human carcinogen, is common in wood-related industries, and millions of workers are occupationally exposed to wood dust worldwide. The comet assay is a rapid, simple, and sensitive method for determining DNA damage. The objective of this study was to investigate the DNA damage associated with occupational exposure to wood dust using the comet assay (peripheral blood samples) among nonsmoking wood workers (n = 31, furniture and construction workers) and controls (n = 19). DNA damage was greater in the group exposed to composite wood products compared to the group exposed to natural woods and controls (P < 0.001). No difference in DNA damage was observed between workers exposed to natural woods and controls (P = 0.13). Duration of exposure and current dust concentrations had no effect on DNA damage. In future studies, workers’ exposures should include cumulative dust concentrations and exposures originating from the binders used in composite wood products. PMID:27398027

Medical Surveillance for Former Workers

Energy Technology Data Exchange (ETDEWEB)

Tim Takaro

2009-05-29

The Former Hanford Worker Medical Monitoring Program, directed by the Occupational and Environmental Medicine Program at the University of Washington, served former production and other non-construction workers who were potentially exposed to workplace hazards while working for the USDOE or its contractors at Hanford. The USDOE Former Workers Program arose from Congressional action in the Defense Authorization of 1993 (Public Law 102). Section 3162 stated that, “The Secretary shall establish and carry out a program for the identification and ongoing medical evaluation of current and former Department of Energy employees who are subject to significant health risks as a result of exposure of such employees to hazardous or radioactive substances during such employment.” (This also covers former employees of USDOE contractors and subcontractors.) The key objective has been to provide these former workers with medical evaluations in order to determine whether workers have experienced significant risk due to workplace exposure to hazards. Exposures to asbestos, beryllium, and noise can produce specific medical conditions: asbestosis, berylliosis, and noise-induced hearing loss (NIHL). Each of these conditions can be identified by specific, non-invasive screening tests, which are widely available. Treatments are also available for individuals affected by these conditions. This project involved two phases. Phase I involved a needs and risk assessment, characterizing the nature and extent of workplace health hazards which may have increased the risk for long-term health effects. We categorized jobs and tasks by likelihood of exposures to specific workplace health hazards; and located and established contact with former Hanford workers. Phase II involved implementation of medical monitoring programs for former workers whose individual work history indicated significant risk for adverse health effects. We identified 118,000 former workers, employed from 1943 to 1997

Adsorption of 4-chlorophenol from aqueous solutions by xad-4 resin: Isotherm, kinetic, and thermodynamic analysis

International Nuclear Information System (INIS)

Bilgili, M. Sinan

2006-01-01

Removal of 4-chlorophenol (4-CP) from synthetic aqueous solutions through adsorption on Amberlite XAD-4 resin, a non-ionic macroreticular resins, under batch equilibrium experimental conditions at 298, 308 and 318 K was investigated. It is necessary to propose a suitable model to a better understanding on the mechanism of 4-CP adsorption. For this purpose, Langmiur, Freundlich, Toth, and Redlich-Peterson (RP) isotherm models were compared. The two and three parameters in the adopted adsorption isotherm models were determined by the help of MATLAB package program. It was determined that best fitted adsorption isotherm models were obtained to be in the order: Redlich-Peterson > Langmuir > Toth > Freundlich isotherms. The pseudo-second-order kinetic model provided the best correlation to the experimental results. Results of the intra-particle diffusion model show that the pore diffusion is not the only rate limiting step. The lower correlation of the data to the Bangham's equation also represents that the diffusion of the adsorbate into pores of the sorbent is not the only rate-controlling step. The thermodynamic constants of adsorption phenomena; ΔG o , ΔH o , and ΔS o were found as -4.17 (at 298 K) kJ/mol, -42.01 kJ/mol, and -0.127 kJ/(mol K), respectively. The results showed that adsorption of 4-CP on Amberlite XAD-4, a nonionic polymeric resin was exothermic and spontaneous

Evaluating the incorporation of heavy metals to agroecosystem. Role of the productive practices executed by agricultural workers

International Nuclear Information System (INIS)

Garcia Cespedes, Damarys; Santana Romero, Jorge Luis; Olivares Rieumont, Susana

2012-01-01

Health risks associated to practical activities in farm and agriculture are increasing all over the world. These risks are depending from technology and chemicals substances abuse. Urban agriculture specifically constitutes a challenge for producers and researchers. Agricultural food production, held inside of the cities, looking for sustainable productions is developed in risky scenarios where it is possible to found environmental pollutants such as heavy metals. Environmental pollutants may to contaminate humans throughout different pathways. The analysis of factors related to agricultural working strategies of urban farm workers, the precedent knowledgement about production places and analytical data related to composition and properties of these sites, are significant criteria for proper management of ecosystems. Qualitative analysis research tool such as expert group criteria is a suitable method for field research in this area. It was determined that the precedent use of soil, the use of fertilizers and phytosanitary products are key elements to be taken into account for successful management of agroecosystems and for health risk prevention related to the possible influence of heavy metals in farm practice

Feasibility study on mental healthcare using indoor plants for office workers

Science.gov (United States)

Kubota, Tsuyoshi; Matsumoto, Hiroshi; Genjo, Kaori; Nakano, Takaoki

2017-10-01

In recent years, it has become a problem that office workers' stresses affect their intellectual productivity. As one of strategies mitigating the stress while working, many studies on the effect of indoor plants introduced into the office have been conducted. The psychological and physiological effects of indoor plants have been expected to mitigate the office workers' stresses. Also, the effects of green amenities such as improvement of productivity, control of the indoor thermal environment, relaxation and recovery of visual fatigue, and improvement of air quality have been expected. In this study, a field investigation on the green amenity effects of indoor plants on office workers' psychological and physiological responses in an actual office was conducted and discussed. This paper describes the measurement results of the physical environment and workers' psychological and physiological responses under the condition with shelves installed with indoor plants in an office room. It was suggested that indoor plants such as mint, basil and begonia, and a combination of red and green plants were effective for mitigating worker's stresses.

Workplace Congruence and Occupational Outcomes among Social Service Workers.

Science.gov (United States)

Graham, John R; Shier, Micheal L; Nicholas, David

2016-06-01

Workplace expectations reflect an important consideration in employee experience. A higher prevalence of workplace congruence between worker and employer expectations has been associated with higher levels of productivity and overall workplace satisfaction across multiple occupational groups. Little research has investigated the relationship between workplace congruence and occupational health outcomes among social service workers. This study sought to better understand the extent to which occupational congruence contributes to occupational outcomes by surveying unionised social service workers ( n = 674) employed with the Government of Alberta, Canada. Multiple regression analysis shows that greater congruence between workplace and worker expectations around workloads, workplace values and the quality of the work environment significantly: (i) decreases symptoms related to distress and secondary traumatic stress; (ii) decreases intentions to leave; and (iii) increases overall life satisfaction. The findings provide some evidence of areas within the workplace of large government run social welfare programmes that can be better aligned to worker expectations to improve occupational outcomes among social service workers.

Y{sub 2}O{sub 3} modified TiO{sub 2} nanosheets enhanced the photocatalytic removal of 4-chlorophenol and Cr (VI) in sun light

Energy Technology Data Exchange (ETDEWEB)

Zhao, Xiaona; Wu, Pei [Department of Physics and Key Laboratory of Artificial Micro-and Nano-structures of Ministry of Education, Wuhan University, Wuhan 430072 (China); Liu, Min [State Grid Zhejiang Electric Power Research Institute, Hangzhou, Zhejiang 310007 (China); Lu, Dingze [Department of Physics and Key Laboratory of Artificial Micro-and Nano-structures of Ministry of Education, Wuhan University, Wuhan 430072 (China); Ming, Junlan [State Grid Zhejiang Electric Power Research Institute, Hangzhou, Zhejiang 310007 (China); Li, Chunhe; Ding, Junqian; Yan, Qiuyang [Department of Physics and Key Laboratory of Artificial Micro-and Nano-structures of Ministry of Education, Wuhan University, Wuhan 430072 (China); Fang, Pengfei, E-mail: fangpf@whu.edu.cn [Department of Physics and Key Laboratory of Artificial Micro-and Nano-structures of Ministry of Education, Wuhan University, Wuhan 430072 (China)

2017-07-15

Highlights: • Y{sub 2}O{sub 3}@TNSswithsynergisticphotocatalyticactivitywerepreparedbyone-potmethod. • Y{sub 2}O{sub 3} loading resulted in the structure evolution of TNSs and content increment of Ti{sup 3+} ions. • Modification on TNSs led to an obvious red shift of the optical absorption edge. • Appropriate amount of Y{sub 2}O{sub 3} can effectively improve the separation efficiency of the h{sup +}/e{sup −} pairs. - Abstract: Y{sub 2}O{sub 3} modified TiO{sub 2} nanosheets (Y{sub 2}O{sub 3}@TNSs), capable of exhibiting sun light, were synthesized through one pot/hydrothermal method using Y (NO{sub 3}){sub 3} as precursor. Multiple techniques were applied to investigate the structures, morphologies, optical and electronic properties and photocatalytic performance of the as-prepared samples. The Y{sub 2}O{sub 3}@TNSs, with thickness of approximately 3–4 nm, large surface area of 240–350 m{sup 2}/g, were full of Y{sub 2}O{sub 3} nanoparticles highly dispersed on the surface. The introduction of Y{sub 2}O{sub 3} influenced the crystallinity and the structure evolution of TNSs, besides, improved the light absorption ability. The surface photo-current and fluorescence spectral studies revealed that the photo-generated charge carrier separation efficiency could be improved by an appropriate modification. The degradation activity of this sun-light-induced photocatalytic has enhanced apparently on 4-Chlorophenol and K{sub 2}Cr{sub 2}O{sub 7} solution, the degradation efficiency of 4-Chlorophenol reached 5.69 times than that of P25, and the maximum TOC removal obtained after 120 min was 67.6%, indicating that most organic compounds were released from the solution. The enhancement in the photocatalytic activity was attributed to the synergetic effect of the Y{sub 2}O{sub 3} and TNSs, which led to a fast separation and slow recombination of photo-induced electron-hole pairs. Consequently, the high efficiency in the experiments showed a promising application of

Worker laying in leafcutter ant Acromyrmex subterraneus brunneus (Formicidae, Attini)

Institute of Scientific and Technical Information of China (English)

ROBERTO S. CAMARGO; LUIZ C FORTI; JULIANE F. S. LOPES; NEWTON C. NORONHA; ANGELO L. T. OTTATI

2007-01-01

We studied the process of offspring production in queenless colonies of Acromyrmex subterraneus brunneus, and particularly evaluated the ovary development of workers as a function of their age. For this, subcolonies were set up and evaluated at different periods of isolation from the queen (2, 4 and 6 months), besides individually labeled age groups. The subcolonies were assessed according to offspring production and ovaries containing oocytes or not. The evaluations showed worker oviposition and development of males originating from worker-laid eggs. At 2 months' absence ofthe queen, eggs and larvae were found, with eggs in a higher proportion than larvae. After 4 months, the proportion of eggs had reduced while larvae had increased, and a pupa was found in one subcolony. At 6 months, besides a higher share of larvae, one pupa and one adult male were found. Dissection of workers revealed ovaries containing oocytes during the periods of evaluation. Only a group of medium-sized and large workers, 23.3%, 20.9% and 37.5% of the population from each period assessed in queenless subcolonies respectively, presented developed oocytes in the ovary. The same was observed in colonies with a queen, with 17.6%, 19.6% and 7.8% of the group of dissected workers from each time period, respectively. With respect to worker age, we observed by dissection of the ovary, that the greatest percentage of individuals with ovarioles containing oocytes occurred at 45 days (6 weeks) up to 90 days (12 weeks). These results probably are associated with the workers reproduction and the laying of trophic and reproductive eggs in colonies with and without a queen; these eggs have distinct functions in each situation.

[Shoes stitched, workers unstitched: a study on working and health conditions among women factory workers in the footwear industry in Franca, São Paulo State, Brazil].

Science.gov (United States)

Prazeres, Taísa Junqueira; Navarro, Vera Lucia

2011-10-01

This study aimed to analyze associations between working conditions and health problems reported by women workers assigned to mechanical stitching in the footwear industry in Franca, São Paulo State, Brazil. The qualitative study's theory and methodology were based on historical and dialectical materialism and combined sociological and ethnographic research techniques. Data were collected with taped interviews, focusing on the workers' life and work stories, systematic observation of the work process, consultation of historical documents, and imagistic production. Analysis of the data revealed the effects of work in mechanical stitching on the health of women workers employed in the factory and at home, who experience precarious labor conditions involving workday intensification and extension, preset production targets, job insecurity, and unhealthy workplaces.

Prolonged employment of older workers : determinants of managers' decisions regarding hiring, retention and training

NARCIS (Netherlands)

Karpinska, K.

2013-01-01

Prolonged and productive employment of older workers is a necessary condition to maintain welfare and social security systems threatened by ageing populations. Despite this importance, the labour market position of older workers is much worse than that of workers in primal age. Yet not much is known

Prolonged employment of older workers: determinants of managers' decisions regarding hiring, retention and training

NARCIS (Netherlands)

Karpinska, K.

2013-01-01

Prolonged and productive employment of older workers is a necessary condition to maintain welfare and social security systems threatened by ageing populations. Despite this importance, the labour market position of older workers is much worse than that of workers in primal age. Yet not much is known

Health and Wellness Lifestyles of Private Industrial Workers in Kumasi, Ghana

OpenAIRE

ABASS, Ademola Olasupo; MOSES, Monday Omoniyi

2016-01-01

Adherence to good health and wellness lifestyles by workers is essential if industries would be maximally productive. This study examined exercise and fitness adherence, nutritional practices, tobacco smoking, alcohol and drugs use, emotional stress, safety practices and disease prevention lifestyles among industrial workers in Kumasi. 222 workers (mean age = 29.9±8.6years) sampled among ten allied industries participated in the study. Modified and revalidated questionnaire using split half t...

Internal dose evaluation of workers involved in radioisotopes and radiopharmaceuticals handling for medical use

International Nuclear Information System (INIS)

Cesar, R.B.P.; Mesquita, C.H. de

1987-01-01

The internal dose levels of IPEN workers, involved in the production of radioisotopes and radiopharmaceuticals for medical use are surveyed. In this production, the workers were splited in six group: research and development, routine production, quality control, packaging, radiological protection and maintenance. The internal dose was evaluated according to the models described by ICRP-30, from the results obtained in the whole body counters monitoring. (C.G.C.) [pt

[Risk and features of occupational diseases in nonferrous metallurgy workers of Kolsky Transpolar area].

Science.gov (United States)

Siurin, S A; Chashchin, V P; Frolova, N M

2015-01-01

The study covered data on 977 cases of occupational diseases in 615 workers of nonferrous metallurgy in Kolsky Transpolar area. Findings are high risk of occupational diseases in workers engaged into electrolysis production of aluminium, all nickel reprocessing and pyrometallic copper reprocessing (GR 7.02-10.0). Electrolysis operators and anode operators of aluminium production are more prone to occupational diseases, with bone and muscular disorders (46.8%) prevalent in the morbidity structure. Respiratory diseases are more prevalent (68.2-100%) in the occupational morbidity structure of copper-nickelindustry workers. Conclusion is made on mandatory improvement of the work conditions and more effective individual protective means against occupational hazards in workers of nonferrous metallurgy in Kolsky Transpolar area.

Impact of In-Service Training and Staff Development on Workers' Job Performance and Optimal Productivity in Public Secondary Schools in Osun State, Nigeria

Science.gov (United States)

Fejoh, Johnson; Faniran, Victoria Loveth

2016-01-01

This study investigated the impact of in-service training and staff development on workers' job performance and optimal productivity in public secondary schools in Osun State, Nigeria. The study used the ex-post-facto research design. Three research questions and three hypotheses were generated and tested using questionnaire items adapted from…

Job stress and productivity increase.

Science.gov (United States)

Adaramola, Samson Sunday

2012-01-01

This paper examines mental and physical pressures that workers bear at work. The authors discuss how on the-job stress affects a person's capabilities and productivity, and how such pressures lend to higher incidences of accidents at work. The paper also discuss methods of reducing job-related stress and increasing productivity. An intervention was conducted amongst workers in a private firm. It shows mental and emotional pressure can affect performance and productivity of a worker on the job. One of the biggest influences of today's worker is on the-job stress. Job stress occurs when the requirements of the job do not match the capabilities, resources, or needs of the worker. This consequently affects how a person would normally deal with customer service problems, grievances, violence, conflict, and decisions on the job. Stress is an inevitable part of everyday life, and is therefore a distinct part of a person's job. To properly control the outcome of stress, there are certain precautions and methods that should be taken that will boost productivity.

Catalytic decomposition of hydrogen peroxide and 4-chlorophenol in the presence of modified activated carbons.

Science.gov (United States)

Huang, Hsu-Hui; Lu, Ming-Chun; Chen, Jong-Nan; Lee, Cheng-Te

2003-06-01

The objective of this research was to examine the heterogeneous catalytic decomposition of H(2)O(2) and 4-chlorophenol (4-CP) in the presence of activated carbons modified with chemical pretreatments. The decomposition of H(2)O(2) was suppressed significantly by the change of surface properties including the decreased pH(pzc) modified with oxidizing agent and the reduced active sites occupied by the adsorption of 4-CP. The apparent reaction rate of H(2)O(2) decomposition was dominated by the intrinsic reaction rates on the surface of activated carbon rather than the mass transfer rate of H(2)O(2) to the solid surface. By the detection of chloride ion in suspension, the reduction of 4-CP was not only attributed to the advanced adsorption but also the degradation of 4-CP. The catalytic activity toward 4-CP for the activated carbon followed the inverse sequence of the activity toward H(2)O(2), suggesting that acidic surface functional group could retard the H(2)O(2) loss and reduce the effect of surface scavenging resulting in the increase of the 4-CP degradation efficiency. Few effective radicals were expected to react with 4-CP for the strong effect of surface scavenging, which could explain why the degradation rate of 4-CP observed in this study was so slow and the dechlorination efficiency was independent of the 4-CP concentration in aqueous phase. Results show that the combination of H(2)O(2) and granular activated carbon (GAC) did increase the total removal of 4-CP than that by single GAC adsorption.

Effects of occupational heat exposure on female brick workers in West Bengal, India

Science.gov (United States)

Sett, Moumita; Sahu, Subhashis

2014-01-01

Background Manual brick-manufacturing units in India engage a large number of female workers on a daily-wage basis for a period of 8 months per year. There are two groups of female workers in the brickfields: the brick molders and the brick carriers. These brickfields are mostly unorganized, and the workers are exposed to extreme conditions such as very high seasonal heat. The present trend of increasing temperatures, as a result of global warming and climate change, will put an additional burden on them. Objective This study aims to evaluate the effect of workplace heat exposure on the well-being, physiological load, and productivity of female brickfield workers in India. Design A questionnaire study (n=120), environmental temperature, and weekly work productivity analyses were evaluated for 8 months in the brickfields. Cardiac strain and walking speed (subset, n=40) were also studied and compared in hotter and colder days amongst the female brickfield workers. Results The subjects experience summer for about 5 months with additional heat stress radiating from the brick kiln. The weekly productivity data show a linear decline in productivity with increased maximum air temperature above 34.9°C. The cardiac parameters (peak heart rate (HRp), net cardiac cost (NCC), relative cardiac cost (RCC), and recovery heart rates) were significantly higher on hotter days (Wet Bulb Globe Temperature (WBGTout) index: 26.9°C to 30.74°C) than on cooler days (WBGTout index: 16.12°C to 19.37°C) for the brick molders; however, this is not the case for the brick carriers. As the brick carriers adapt to hotter days by decreasing their walking speed, their productivity decreases. Conclusion We conclude that high heat exposure in brickfields during summer caused physiological strain in both categories of female brickfield workers. A coping strategy employed by the brick carriers was to reduce their walking speed and thus lose part of their earnings. The lost productivity for every

Effects of occupational heat exposure on female brick workers in West Bengal, India.

Science.gov (United States)

Sett, Moumita; Sahu, Subhashis

2014-01-01

Manual brick-manufacturing units in India engage a large number of female workers on a daily-wage basis for a period of 8 months per year. There are two groups of female workers in the brickfields: the brick molders and the brick carriers. These brickfields are mostly unorganized, and the workers are exposed to extreme conditions such as very high seasonal heat. The present trend of increasing temperatures, as a result of global warming and climate change, will put an additional burden on them. This study aims to evaluate the effect of workplace heat exposure on the well-being, physiological load, and productivity of female brickfield workers in India. A questionnaire study (n=120), environmental temperature, and weekly work productivity analyses were evaluated for 8 months in the brickfields. Cardiac strain and walking speed (subset, n=40) were also studied and compared in hotter and colder days amongst the female brickfield workers. The subjects experience summer for about 5 months with additional heat stress radiating from the brick kiln. The weekly productivity data show a linear decline in productivity with increased maximum air temperature above 34.9°C. The cardiac parameters (peak heart rate (HRp), net cardiac cost (NCC), relative cardiac cost (RCC), and recovery heart rates) were significantly higher on hotter days (Wet Bulb Globe Temperature (WBGTout) index: 26.9°C to 30.74°C) than on cooler days (WBGTout index: 16.12°C to 19.37°C) for the brick molders; however, this is not the case for the brick carriers. As the brick carriers adapt to hotter days by decreasing their walking speed, their productivity decreases. We conclude that high heat exposure in brickfields during summer caused physiological strain in both categories of female brickfield workers. A coping strategy employed by the brick carriers was to reduce their walking speed and thus lose part of their earnings. The lost productivity for every degree rise in temperature is about 2% in the

[Relationship between perceptions of safety climate at workplace and depressive disorders in manufacturing workers].

Science.gov (United States)

Liu, Xu-hua; Xiao, Ya-ni; Huang, Zhi-xiong; Huang, Shao-bin; Cao, Xiao-ou; Guan, Dong-bo; Chen, Wei-qing

2013-04-01

To investigate the risk factors for depressive disorders in manufacturing workers and to provide a basis for developing health promotion measures at workplace. A questionnaire survey was performed in 8085 front-line production workers from 33 manufacturing enterprises in Nanhai District of Foshan, Guangdong Province, China. The questionnaire contained a survey of demographic characteristics, the Safety Climate Scale, the Center for Epidemiological Studies Depression Scale, etc. The multilevel logistic regression analysis was applied to investigate the risk factors for depressive disorders in workers. A total of 6260 workers completed the survey; their mean age was 31.1 ± 8.6 years, and 53.2% of them were males. The multilevel logistic regression analysis showed that after adjustment for sociodemographic factors such as age, sex, and martial status, more depressive disorders were reported in the enterprises with higher score of "production safety training" than in those with lower score (OR = 1.46, 95%CI = 1.07 ∼ 1.97); fewer depressive disorders were reported in the enterprises with higher score of "colleagues concerned about production safety" than in those with lower score (OR = 0.08, 95%CI = 0.03 ∼ 0.26); the relationships of "safety warnings and precautions" and "managers concerned about production safety" with workers' depressive disorders were not statistically significant (OR = 0.78, 95%CI = 0.48 ∼ 1.28; OR = 1.08, 95%CI = 0.68 ∼ 1.72). Depressive disorders in manufacturing workers are related to the safety climate at workplace, which indicates that a good safety climate at workplace should be created to prevent and control depressive disorders in workers.

Bloody Lucky: the careless worker myth in Alberta, Canada.

Science.gov (United States)

Barnetson, Bob; Foster, Jason

2012-01-01

As the Canadian province of Alberta has adopted neoliberal prescriptions for government, it has increasingly attributed workplace injuries to worker carelessness. Blaming workers for their injuries appears to be part of a broader strategy (which includes under-reporting injury levels and masking ineffective state enforcement with public condemnation of injurious work) to contain the potential political consequences associated with unsafe workplaces. This reflects the state's sometimes conflicting goals of maintaining the production process and the political legitimacy of the government and the capitalist social formation. This case study considers the political dynamics of occupational health and safety in Alberta to understand the escalating use of the careless worker myth over time. Alberta's emphasis on employer self-regulation has resulted in a large number of annual workplace injuries. The 2008 "Bloody Lucky" safety awareness campaign intensified this attribution of blame via gory videos aimed at young workers. This case study examines the validity of this attribution to reveal that this campaign provides workers, particularly young workers, with inaccurate information about injury causation, which may impede their ability and motivation to mitigate workplace risks.

Iron oxyhydroxide nanorods with high electrochemical reactivity as a sensitive and rapid determination platform for 4-chlorophenol

Energy Technology Data Exchange (ETDEWEB)

Zhang, Yuanyuan [Key Laboratory for Material Chemistry of Energy Conversion and Storage, Ministry of Education, School of Chemistry and Chemical Engineering, Huazhong University of Science and Technology, Wuhan 430074 (China); Britton Chance Center for Biomedical Photonics at Wuhan, National Laboratory for Optoelectronics-Hubei Bioinformatics & Molecular Imaging Key Laboratory, Systems Biology Theme, Department of Biomedical Engineering, College of Life Science and Technology, Huazhong University of Science and Technology, Wuhan 430074 (China); Cheng, Qin; Zheng, Meng [Key Laboratory for Material Chemistry of Energy Conversion and Storage, Ministry of Education, School of Chemistry and Chemical Engineering, Huazhong University of Science and Technology, Wuhan 430074 (China); Liu, Xin [Britton Chance Center for Biomedical Photonics at Wuhan, National Laboratory for Optoelectronics-Hubei Bioinformatics & Molecular Imaging Key Laboratory, Systems Biology Theme, Department of Biomedical Engineering, College of Life Science and Technology, Huazhong University of Science and Technology, Wuhan 430074 (China); Wu, Kangbing, E-mail: kbwu@hust.edu.cn [Key Laboratory for Material Chemistry of Energy Conversion and Storage, Ministry of Education, School of Chemistry and Chemical Engineering, Huazhong University of Science and Technology, Wuhan 430074 (China)

2016-04-15

Highlights: • Prepared FeOOH nanorods exhibited high reactivity toward the oxidation of 4-CP. • Response signals and detection sensitivity of 4-CP increased greatly by FeOOH. • Highly-sensitive and rapid determination platform was developed for 4-CP. • Practical application in water samples was studied, and the accuracy was good. - Abstract: Iron oxyhydroxide (FeOOH) nanorods were prepared through solvothermal reaction, and characterized using Raman spectroscopy, X-ray diffraction, energy dispersive X-ray spectroscopy, transmission electron microscopy and scanning electron microscopy. Thereafter, the prepared FeOOH nanorods were used as sensing material to construct a novel detection platform for 4-chlorophenol (4-CP). The electrochemical behaviors of 4-CP were studied, and the oxidation peak currents increased greatly on the surface of FeOOH nanorods. The signal enhancement mechanism was studied for 4-CP, and it was found that the prepared FeOOH nanorods remarkably improved the electron transfer ability and surface adsorption efficiency of 4-CP. The influences of pH value, amount of FeOOH nanorods and accumulation time were examined. As a result, a highly-sensitive electrochemical method was developed for the rapid determination of 4-CP. The linear range was from 10 to 500 nM, and the detection limit was 3.2 nM. It was used in different water samples, and the results consisted with the values that obtained by high-performance liquid chromatography.

Scintigraphy of liver and spleen in vinyl chloride workers

Energy Technology Data Exchange (ETDEWEB)

Biersack, H J; San Luis, T Jr; Lange, C E; Thelen, M; Veltman, G; Winkler, C [Bonn Univ. (Germany, F.R.). Inst. fuer Klinische und Experimentelle Nuklearmedizin; Bonn Univ. (Germany, F.R.). Klinik und Poliklinik der Haut- und Geschlechtskrankheiten; Bonn Univ. (Germany, F.R.). Radiologische Klinik)

1977-10-01

In 152 VC-exposed workers of whom 124 were employed in the PVC-production and 28 in VC-processing plants, liver and spleen imaging was performed using sup(99m)Tc-sulphur colloid and /sup 197/Hg-BMHP. In 101 (= 81%) of the 124 workers of the PVC-production plant and in 18 (= 64%) workers of PVC-processing factories pathological liver and spleen scintigrams were found. The most frequent pathological change in the scintigraphic image was an increase in splenic colloid accumulation, when compared with the liver uptake. Three angiosarcomas of the liver were detected through circumscribed defects of colloid accumulation. Sequential liver scintigraphy was done in 15 cases. In 7 patients with esophageal varices, considerable decrease in portal venous blood flow was demonstrated. - As a result of our investigations it can be stated that scintigraphically detectable changes are sensitive indicators of VC-induced lesions of the liver including liver fibrosis, portal hypertension and angiosarcoma.

Are Female Workers Less Productive Than Male Workers? Productivity and the Gender Wage Gap

OpenAIRE

Meyerson, Eva M.; Petersen, Trond; Snartland, Vemund

1998-01-01

It is extraordinarily difficult to determine the extent to which the gender wage gap reflects discriminatory behaviors by employers or differences in productive capacities between men and women. We note that where piece-rate work is performed, wages should in principle reflect productivity differences and that it is more difficult to discriminate on the basis of gender because one is paid for what one produces. With this as our point of departure, we compared men and women working in the same...

Cobalt exposure and lung disease in tungsten carbide production. A cross-sectional study of current workers

International Nuclear Information System (INIS)

Sprince, N.L.; Oliver, L.C.; Eisen, E.A.; Greene, R.E.; Chamberlin, R.I.

1988-01-01

A cross-sectional study of 1,039 tungsten carbide (TC) production workers was carried out. The purposes were (1) to evaluate the prevalence of interstitial lung disease (ILD) and work-related wheezing, (2) to assess correlations between cobalt exposure and pulmonary disease, (3) to compare lung disease in grinders of hard carbide versus nongrinders, and (4) to evaluate the effects of new and previous threshold limit values for cobalt of 50 and 100 micrograms/m3. We obtained medical and occupational histories, flow-volume loops, single breath carbon monoxide diffusing capacity (DLCO), and chest radiographs. Time-weighted average cobalt levels were determined at every step in the production process. Work-related wheeze occurred in 113 participants (10.9%). Profusion greater than or equal to 1/0 occurred in 26 (2.6%) and interstitial lung disease (defined as profusion greater than or equal to 1M, FVC or DLCO less than or equal to 70%, and FEV1/FVC% greater than or equal to 75) in 7 (0.7%). The relative odds of work-related wheeze was 2.1 times for present cobalt exposures exceeding 50 micrograms/m3 compared with exposures less than or equal to 50 micrograms/m3. The relative odds of profusion greater than or equal to 1/0 was 5.1 times for average lifetime cobalt exposures exceeding 100 micrograms/m3 compared with exposures less than or equal to 100 micrograms/m3 in those with latency exceeding 10 yr. ILD was found in three workers with very low average lifetime exposures (less than 8 micrograms/m3) and shorter latencies. Grinders of hard carbide had lower mean DLCO than nongrinders, even though their cobalt exposures were lower

Weapons workers: Ruin or revival?

International Nuclear Information System (INIS)

Ustinov, A.

1995-01-01

The formidable task of restructuring the former Soviet Union's economic system depends largely on it success in converting a defense industry that once employed 11 million Soviet workers to peaceful pursuits, says Artiom Ustinov, a researcher in the U.S. and Canada Institute in Moscow. open-quotes Governments could convert defense facilities into those that develop and manufacture products that people desperately need and want,close quotes says Ustinov. Unfortunately, such a transformation cannot happen quickly because the former Soviet Union lacks a high-tech sector into which former weapons workers can migrate. An even more serious problem stems from a traditional isolation from world markets. Civilian manufacturing in the former Soviet Union, which was never forced to meet international standards for quality and performance, has been marked by inferior products. open-quotes With financial support, a well-defined program, incentives, and retraining, the military research labs could find themselves in a better position to release their huge potential for creative rather than destructive purposes,close quotes Ustinov concludes

Dimensions of lay health worker programmes: results of a scoping study and production of a descriptive framework.

Science.gov (United States)

South, Jane; Meah, Angela; Bagnall, Anne-Marie; Jones, Rebecca

2013-03-01

Approaches that engage and support lay health workers in the delivery of health improvement activities have been widely applied across different health issues and populations. The lack of a common terminology, inconsistency in the use of role descriptors and poor indexing of lay health worker roles are all barriers to the development of a shared evidence base for lay health worker interventions. The aim of the paper is to report results from a scoping study of approaches to involve lay people in public health roles and to present a framework for categorisation of the different dimensions of lay health worker programmes. Our scoping study comprised a systematic scoping review to map the literature on lay health worker interventions and to identify role dimensions and common models. The review, which was limited to interventions relevant to UK public health priorities, covered a total of 224 publications. The scoping study also drew on experiential evidence from UK practice. Research-based and practice-based evidence confirmed the variety of role descriptors in use and the complexity of role dimensions. Five common models that define the primary role of the lay health worker were identified from the literature. A framework was later developed that grouped features of lay health worker programmes into four dimensions: intervention, role, professional support/service and the community. More account needs to be taken of the variations that occur between lay health worker programmes. This framework, with the mapping of key categories of difference, may enable better description of lay health worker programmes, which will in turn assist in building a shared evidence base. More research is needed to examine the transferability of the framework within different contexts.

Determination of chlorophenols in honey samples using in-situ ionic liquid-dispersive liquid-liquid microextraction as a pretreatment method followed by high-performance liquid chromatography.

Science.gov (United States)

Fan, Chen; Li, Nai; Cao, Xueli

2015-05-01

In-situ ionic liquid-dispersive liquid-liquid microextraction (IL-DLLME) method was developed as a pretreatment method for the detection of six chlorophenols (CPs) in honey samples. The hydrophobic ionic liquid [C4MIM][NTf2], formed in-situ by the hydrophilic ionic liquid [C4MIM][BF4] and the ion exchange reagent LiNTf2 was used as the microextractant solvent of CPs from honey sample. Then the enriched analytes were back-extracted into 40 μL of 0.14 M NaOH solution and finally subjected to analysis by high-performance liquid chromatography. The method showed low limit of detection of CPs, 0.8-3.2 μg/L and high enrichment factor, 34-65 with the recoveries range from 91.60% to 114.33%. The method is simple, rapid, environmentally friendly and with high extraction efficiency. Copyright © 2014 The Authors. Published by Elsevier Ltd.. All rights reserved.

Needlestick Injuries in Agriculture Workers and Prevention Programs.

Science.gov (United States)

Buswell, Minden L; Hourigan, Mary; Nault, André J; Bender, Jeffrey B

2016-01-01

There are a variety of biologics, vaccines, antibiotics, and hormones used in animal agriculture. Depending upon the procedure or pharmaceutical used, accidental injections or product exposures can result in mild to severe injuries. Needlestick injury (NSI) prevention, research, and education for veterinarians and agriculture workers is limited. The objective of this study was to collect and review published case reports and case series/surveys on human needlestick exposure to veterinary biologics and to summarize needlestick prevention strategies for agricultural workers/veterinarians. A search was conducted of PubMed and Centre for Agriculture Bioscience International (CABI) databases. References were reviewed to identify additional articles. NSI among agricultural workers were primarily included in this review. Thirty articles were applicable to exposures in agricultural settings. Relevant literature consisted of case reports, survey/case series articles, prevention documents, and background articles. Fifty-nine case patients were identified. Most of these cases were associated with exposures to specific vaccines or veterinary products. Injury location was identified from 36 individuals: 24 (67%) NSI to the hands, 10 (28%) injuries to the legs, and 2 to other body locations. Of the 59 cases, 20 (34%) involved oil-adjuvant vaccines. Evidence of hospitalization was recorded for 30 case patients. The length of hospitalization was available from 11 case patients. Median length of hospitalization was 3 days (range: 1-4). Surgical intervention was reported in 25 case patients. Outcome information was available on 30 case patients. Fifteen made a complete recovery within 2 weeks of treatment, 14 had residual sequelae attributed to the injury, and there was 1 reported death. Of the 13 survey/case series articles: 2 focused on oil-adjuvant products, 1 on Brucellosis RB-51 vaccine, 3 on tilmicosin, 1 on Salmonella enteritidis vaccine, 1 on high-pressure injection, and 5

Worker Entrepreneurship.

Science.gov (United States)

Doucouliagos, Chris

1992-01-01

Evaluates the experience of worker entrepreneurship, highlighting successes and failures in Europe, and analyzes the relative importance of factors to worker entrepreneurship such as access to finance, education and training, organizational culture, and worker risk taking. (JOW)

Xenobiotic organic compounds in wastewater

DEFF Research Database (Denmark)

Eriksson, Eva; Baun, Anders; Henze, Mogens

2002-01-01

hundred of XOCs, among them mainly originating from hygiene products: chlorophenols, detergents and phthalates. Several compounds not deriving from hygiene products were also identified e.g. flame-retardants and drugs. A environmental hazard identification showed that a large number of compounds with high...

Personal exposure to inhalable cement dust among construction workers

International Nuclear Information System (INIS)

Peters, Susan; Kromhout, Hans; Thomassen, Yngvar; Fechter-Rink, Edeltraud

2009-01-01

A case study was carried out in 2006-2007 to assess the actual cement dust exposure among construction workers involved in a full-scale construction project and as a comparison among workers involved in various stages of cement and concrete production. Full-shift personal exposure measurements were performed for several job types. Inhalable dust and cement dust (based on analysis of elemental calcium) concentrations were determined. Inhalable dust exposures at the construction site ranged from 0.05 to 34 mg/m3, with a mean concentration of 1.0 mg/m3. For inhalable cement dust mean exposure was 0.3 mg/m3 (range 0.02-17 mg/m3). Reinforcement and pouring workers had the lowest average concentrations. Inhalable dust levels in the ready-mix and pre-cast concrete plants were, on average, below 0.5 mg/m3 for inhalable dust and below 0.2 mg/m3 for inhalable cement dust. Highest dust concentrations were measured in cement production, particularly during cleaning tasks (inhalable dust GM=55 mg/m3; inhalable cement dust GM=33 mg/m3) at which point the workers wore personal protective equipment. Elemental measurements showed highest but very variable cement percentages in the cement plant and very low percentages of cement during reinforcement work and pouring.

Knowledge and provision of misoprostol among pharmacy workers in Senegal: a cross sectional study.

Science.gov (United States)

Reiss, Kate; Footman, Katharine; Burke, Eva; Diop, Nafissatou; Ndao, Ramatoulaye; Mane, Babacar; van Min, Maaike; Ngo, Thoai D

2017-07-03

Making misoprostol widely available for management of postpartum haemorrhage (PPH) and post abortion care (PAC) is essential for reducing maternal mortality. Private pharmacies (thereafter called "pharmacies") are integral in supplying medications to the general public in Senegal. In the case of misoprostol, pharmacies are also the main supplier to public providers and therefore have a key role in increasing its availability. This study seeks to understand knowledge and provision of misoprostol among pharmacy workers in Dakar, Senegal. A cross-sectional survey was conducted in Dakar, Senegal. 110 pharmacy workers were interviewed face-to-face to collect information on their knowledge and practice relating to the provision of misoprostol. There are low levels of knowledge about misoprostol uses, registration status, treatment regimens and side effects among pharmacy workers, and corresponding low levels of training on its uses for reproductive health. Provision of misoprostol was low; of the 72% (n = 79) of pharmacy workers who had heard of the product, 35% (n = 27) reported selling it, though rarely for reproductive health indications. Almost half (49%, n = 25) of the respondents who did not sell misoprostol expressed willingness to do so. The main reasons pharmacy workers gave for not selling the product included stock outs (due to product unavailability from the supplier), perceived lack of demand and unwillingness to stock an abortifacient. Knowledge and availability of misoprostol in pharmacies in Senegal is low, posing potential challenges for delivery of post-abortion care and obstetric care. Training is required to address low levels of knowledge of misoprostol registration and uses among pharmacy workers. Barriers that prevent pharmacy workers from stocking misoprostol, including weaknesses in the supply chain and stigmatisation of the product must be addressed. Low reported sales for reproductive health indications also suggest limited prescribing of

Blessings on the Food, Blessings on the Workers: Arts-Based Education for Migrant Worker Justice

Science.gov (United States)

Barndt, Deborah

2013-01-01

Migrant agricultural workers are not only on the margins of Canadian and global food systems; they are also on the margins of public consciousness about the labour behind the food we eat. Even local food movement groups who advocate for both social justice and sustainable food production have not made migrant labour a priority concern. Popular…

Inhibition of dehydrogenase activity in petroleum refinery wastewater bacteria by phenolic compounds

OpenAIRE

Gideon C. Okpokwasili; Christian Okechukwu Nweke

2010-01-01

The toxicity of phenol, 2-nitrophenol, 4-nitrophenol, 2,4-dinitrophenol, 2-chlorophenol, 4-chlorophenol, 4-bromophenol and 3,5-dimethylphenol on Pseudomonas, Bacillus and Escherichia species isolated from petroleum refinery wastewater was assessed via inhibition of dehydrogenase enzyme activity. At low concentrations, 2-nitrophenol, 2-chlorophenol, 4-chlorophenol, 4-bromophenol and 3,5-dimethylphenol stimulated dehydrogenase activity and at sufficient concentrations, phenolic compounds inhibi...

Assessment of lung cancer risks for some categories of underground workers

International Nuclear Information System (INIS)

Dimitrov, M.

1975-01-01

In radioactive mines as well as in hardrock mines, tunnels under construction, and other underground workings, increased atmospheric levels of radioactive-gas daughter products are associated with a potential hazard of inhalation overexposure to workers. Absorbed dose from the alpha-activity component of deposition occurring in the process of breathing manifests a maximum in the area of secondary to quarternary bronchi. In this critical tissue, radiation exposure, along with other deleterious factors, produces conditions favourable to initiation of lung cancer, with a frequency of the latter proportional to cumulative dose. An assessment was made of absolute radiation risk to workers inhaling a radon-daughter contaminated atmosphere, on the basis of an estimated cumulative dose and a dose-response relation arrived at from epidemiological studies by other authors. For a range with a lower limit representing the product of maximum permissible concentration and half of the underground experience assigned to first category labor, and an upper limit determined by the product of maximum ''hidden'' alpha-decay energy measured and a full underground experience (180 months), cumulative exposures were found to vary from 90 to 8100 WLM. Rough estimates of corresponding lung cancer incidence ranged from 2 to 150 cases per year per 10,000 workers, versus 2-5 cases per year per 10,000 members of the general male population of the country. Results, obtained from a reconnaissance statistical study on a sample of 230 underground workers, with suitable working experiences and personal cumulative exposures, indicated a predicted frequency of lung cancer development of 0.43 cases per year, leading to an estimate of 19 cases per year per 10,000 workers. Such a magnitude of risk clearly shows an urgent need for introducing effective measures to improve radiological conditions in the occupational environment for a large proportion of the underground workers. (author)

The impact of chronotype on melatonin levels among shift workers.

Science.gov (United States)

Bhatti, Parveen; Mirick, Dana K; Davis, Scott

2014-03-01

The association between shift work and cancer, which is thought to be mediated by effects on circulating melatonin levels, may be modified by chronotype (ie, the inherent preference for activity in the morning or the evening); however, few studies have examined the potential impact of chronotype on the carcinogenic effects of shift work. The authors analysed the impact of chronotype on previously reported differences in melatonin levels among healthcare workers that exclusively worked night or day shifts. The cross-sectional study included 664 men and women (310 day shift and 354 night shift workers) from which urine samples were collected throughout work and sleep periods and were assayed for 6-sulfatoxymelatonin. Participants also completed the Composite Scale of Morningness, a questionnaire used to assess chronotype. Among both morning and evening-type night shift workers, 6-sulfatoxymelatonin levels were constitutively lower during daytime sleep, night-time sleep and night work compared with day shift workers during night-time sleep. However, morning-type night shift workers consistently showed 6-sulfatoxymelatonin levels that were closer to levels in day shift workers than did evening-type night shift workers. Differences in 6-sulfatoxymelatonin levels between morning-type and evening-type night shift workers relative to day shift workers were statistically significant in every instance (pnight shift workers may be better able to maintain a 'normal' circadian pattern of melatonin production as compared with evening-type night shift workers. The impact of this chronotype effect on cancer risk among shift workers requires further study.

Aging workers and the employee-employer relationship

NARCIS (Netherlands)

Bal, P.M.; Kooij, T.A.M.; Rousseau, D.M.

2015-01-01

This book focuses on the aging workforce from the employment relationship perspective. This innovative book specifically focuses on how organizations can ensure their aging workers remain motivated, productive and healthy. In 15 chapters, several experts on this topic describe how organizations

Assessment of the occupational exposure of the workers involved in the 123I production at the IEN/CNEN-RJ

International Nuclear Information System (INIS)

Araujo, Francisco de

2005-01-01

123 I is a gamma emitter used for diagnosis in Nuclear Medicine. Since 1998 it is produced in the Institute of Nuclear Energy (IEN) and supplied to the Clinics and Hospitals located in the city of Rio de Janeiro. The annual production is in the approximately of 0,74 TBq (20 Ci), which represents a risk of external and internal exposure to the workers involved in this activity. A survey of external doses in the period of 1994 to 2004 was carried out based on the individual registries available in the CONEXO Data Base operated by the Institute of Radiation Protection and Dosimetry (IRD). It was verified an increase of the external exposure associated to the production curve. However, the individual doses are all bellow the annual limits established by the regulatory board. On the other hand, the variation of doses among individuals involved in the same tasks suggests the possibility of optimization of procedures. Regarding internal exposure it was calculated a decision factor above 1mSv for the practice, which justifies the need for internal monitoring. An evaluation of the process based on the results of in vivo thyroid monitoring in the period of 2000 to 2004 was carried out to identify the steps which represent higher risk of internal exposure. The available data indicate that the laboratory of quality control is the critical step in terms of internal contamination. This conclusion can be justified by the high volatility of iodine which is manipulated in the form of a liquid open source during this step. With the aim of optimizing monitoring procedures for the control of occupationally exposed workers in the production of 123 I, in vivo and in vitro bioassay methods were developed to identify and quantify internal contamination by such radionuclide, using the detection systems available at the Bioassay Laboratory and at the In Vivo Measurements Laboratory. The techniques developed present sensitivity compatible with the derived registry level associated to the

Lung scintigraphy evaluation in workers exposed to abrasive dusts

International Nuclear Information System (INIS)

Terra Filho, Mario

1995-01-01

The production process of abrasives use aluminium, or silicon carbide a synthetic material with a hardness only slightly less than that of a diamond. It is popularly known as carborundum since it was first manufactured as an abrasive in 1891, produced by the fusion of high grade silica and petroleum coke with sawdust. For many years silicon carbide was thought not to give rise to pulmonary lesions. Recently several researchers suggested the existence of a carborundum pneumoconiosis. The aim of this study was to evaluate the role of the pulmonary clearance of 99m Technetium chelated to diethylene-triamine penta-acetate ( 99m Tc DTPA), and 67 Gallium lung scanning in workers exposed to abrasive dusts. Thirty seven subjects, 13 smokers and 24 nonsmokers and ex smokers were studied. In 32 (86,48%) 67 Gallium lung scanning was positive including 13 (40,62%) retired workers. We conclude that non smoking workers of abrasives plants have a pulmonary alveolar epithelial permeability disturbance similar as observed in smoking workers and smoking controls. Most workers, ex-workers of these industries and in patients with carborundum pneumoconiosis there is an evidence of pulmonary inflammation measured with abnormal 67 Gallium lung scan. (author)

Impact of Work Conditions on Productivity

Directory of Open Access Journals (Sweden)

Anton Petričević

2011-12-01

Full Text Available Every institution should monitor its productivity. If productivity is decreasing, particular measures should be taken. The aim of the paper was to analyse the situation in four institutions by means of questionnaires filled in by 135 respondents, and to point to the problems that were detected through questionnaires. To increase productivity, high levels of worker responsibility should be introduced within the framework of work process, taking into account work potentials of workers, quantity and quality of work. From the results obtained through this survey it was noted that an adequately motivated worker in comfortable work environment is willing to be fully devoted to work and achieve best results, thus ultimately contributing to the overall productivity. There should be a tendency to adequately reward every worker who is willing to commit to work during full working hours and to be responsible for his or her work. Every type of work can be defined by productivity function.

Lymphohematopoietic cancer mortality and morbidity of workers in a refinery/petrochemical complex in Korea.

Science.gov (United States)

Koh, Dong-Hee; Kim, Tae-Woo; Yoon, Yong-Hoon; Shin, Kyung-Seok; Yoo, Seung-Won

2011-03-01

The purpose of this retrospective cohort study was to investigate the relationship between exposure of Korean workers to petrochemicals in the refinery/petrochemical industry and lymphohematopoietic cancers. The cohort consisted of 8,866 male workers who had worked from the 1960s to 2007 at one refinery and six petrochemical companies located in a refinery/petrochemical complex in Korea that produce benzene or use benzene as a raw material. Standardized mortality ratios (SMRs) and standardized incidence ratios (SIRs) were calculated for 1992-2007 and 1997-2005 based on the death rate and cancer incidence rate of the Korean male population according to job title (production, maintenance, laboratory, and office workers). The overall mortality and most cause-specific mortalities were lower among these workers than those of the general Korean population. Increased SMRs were observed for leukemia (4/1.45; SMR 2.77, 95% CI: 0.75-7.09) and lymphohematopoietic cancers (5/2.51; SMR 2, 95% CI: 0.65-4.66) in production workers, and increased SIRs were also observed in leukemia (3/1.34; SIR 2.24, 95% CI: 0.46-6.54) and lymphohematopoietic cancers (5/3.39; SIR 1.47, 95% CI: 0.48-3.44) in production workers, but the results were not statistically significant. The results showed a potential relationship between leukemia and lymphohematopoietic cancers and exposure to benzene in refinery/petrochemical complex workers. This study yielded limited results due to a short observational period; therefore, a follow-up study must be performed to elucidate the relationship between petrochemical exposure and cancer rates.

Employee engagement, boredom and frontline construction workers feeling safe in their workplace.

Science.gov (United States)

Whiteoak, John W; Mohamed, Sherif

2016-08-01

Systems thinking is a philosophy currently prevalent within construction safety literature that is applied to understand and improve safety in sociotechnical systems. Among systems, the site-project organizational system is of particular interest to this paper. Using focus group and survey feedback research to learn about how safety incidents effect levels of construction workers engagement this paper reveals how a safety incident provides an opportunity to create a potential quality (productivity) upgrade within an organization. The research approach involved a qualitative study involving 27 frontline supervisors and a follow-up survey completed by 207 frontline workers in the Australian Asphalt and Pavement Industry. The focus group interviews supported the articulation of the concepts of tacit safety, explicit safety, situational awareness, foresight ability, practical intelligence and crew synergy. Our findings indicate that having regular shift changes and other job site workers being fatigued are influential on perceptions of tacit safety. An individual's foresight ability was found to be the most potent predictor of worker perceptions of work engagement. The paper explains that relatively small improvements in worker perceptions of safety can bring about significant improvements in employee engagement and productivity. Copyright © 2015 Elsevier Ltd. All rights reserved.

Latex Allergy In Health Care Workers

Directory of Open Access Journals (Sweden)

Hayriye Sarıcaoğlu

2013-05-01

Full Text Available Background and Design: We aimed to determine the frequency of latex allergy in our hospital and to to evaluate the clinical and demographical features of the cases.Materials and Methods: A detailed questionnaire was administered to healthcare workers by a physician. Skin prick test with latex and patch test with rubber chemicals and a piece of latex glove were performed for all healthcare workers. Latex-specific IgE was measured in serum.Results: The study sample consisted of 36 nurses, 14 doctors, and 50 healthcare workers. While 46 subjects had symptoms, 54 subjects had no symptoms. The relationship of clinical disease with working duration, exposure duration (hour/day, history of atopy, and drug/food allergies was statistically significant. Five nurses and 1 healthcare worker had positive skin prick test. Two of them had positive latex-specific IgE. Positive skin prick test statistically significantly correlated with occupation, working duration, exposure duration (hour/day and positive latex-specific IgE. Two nurses and 2 healthcare workers had positive latex-specific IgE. Two of them had positive skin prick test. Positive latexspecific IgE statistically significantly correlated with working duration, exposure duration, and positive skin prick test. Patch test with a piece of latex glove was negative in all subjects. Three healthcare workers had positive patch test with thiuram-mix, one of them had also positive patch test with mercaptobenzothiazole.Discussion: One of the risk factors for latex allergy is occupations involving frequent exposure to latex products. Latex allergy should be taken into consideration if type I hypersensitivity reactions occur in occupational groups at risk for anaphylactic reaction.

Illness related wage and productivity losses: Valuing 'presenteeism'.

Science.gov (United States)

Zhang, Wei; Sun, Huiying; Woodcock, Simon; Anis, Aslam

2015-12-01

One source of productivity loss due to illness is the reduced "quantity" or "quality" of labor input while working, often referred to as presenteeism. Illness-related presenteeism has been found to be potentially more costly than absenteeism. To value presenteeism, existing methods use wages as a proxy for marginal productivity at the firm level. However, wage may not equal marginal productivity in some scenarios. One instance is when a job involves team production and perfect substitutes for workers are not readily available. Using a Canadian linked employer-employee survey (2001-2005), we test whether relative wage equals relative marginal productivity among team workers and non-team workers with different frequencies of presenteeism (reduction at work due to illness). For the pooled cross-sectional estimates (2001, 2003, 2005) we obtain 13,755 observations with 6842 unique workplaces. There are 6490 observations for the first differences estimates from the odd years and 5263 observations for the first differences estimates from 2001 to 2002 and 2003 to 2004. We find that in both small and large firms, team workers with frequent reductions at work are less productive but earn similarly compared with non-team workers without reductions. We also find that in small firms, workers with occasional work reductions are more productive than workers without reductions, but the reverse is true in large firms. The study findings partially support the literature stating that productivity loss resulting from employee presenteeism could exceed wages if team work is involved. Copyright © 2015 Elsevier Ltd. All rights reserved.

Artificial neural networks based predictive model for worker ...

African Journals Online (AJOL)

... meet highly dynamic production conditions in terms of demand, processing times, ... network has been formulated on worker assignment for VCMS under dual ... to generate simulated datasets that drive the training process of proposed ANN ...

Do Stereotypes about Older Workers Change? : Evidence from a Panel Study among Employers

NARCIS (Netherlands)

van Dalen, Harry; Henkens, K.

2017-01-01

Background: Stereotypies of older workers and their productive value are believed to contrast with their actual potential. Still, these stereotypes among employers persist. Objective: This article examines whether managers have changed their views on older workers and if so what the driving forces

Do Stereotypes about Older Workers Change? Evidence from a Panel Study among Employers

NARCIS (Netherlands)

van Dalen, H.P.; Henkens, K.

2017-01-01

Background: Stereotypies of older workers and their productive value are believed to contrast with their actual potential. Still, these stereotypes among employers persist. Objective: This article examines whether managers have changed their views on older workers and if so what the driving forces

75 FR 7035 - Notice of Determinations Regarding Eligibility To Apply for Worker Adjustment Assistance

Science.gov (United States)

2010-02-16

... & Stratton Power Products Group, LLC, Home Power Division, Leased Workers of Lifestyle Staffing, Adecco...; Rockwell Automation, (Depts. 411 and 445), Leased Workers of Manpower, Aerotek, Adecco, Mequon, WI... Tapfin, Schaumburg, IL October 5, 2008. [[Page 7038

Lung function reduction and chronic respiratory symptoms among workers in the cement industry: a follow up study

Directory of Open Access Journals (Sweden)

Zeleke Zeyede K

2011-11-01

Full Text Available Abstract Background There are only a few follow-up studies of respiratory function among cement workers. The main aims of this study were to measure total dust exposure, to examine chronic respiratory symptoms and changes in lung function among cement factory workers and controls that were followed for one year. Methods The study was conducted in two cement factories in Ethiopia. Totally, 262 personal measurements of total dust among 105 randomly selected workers were performed. Samples of total dust were collected on 37-mm cellulose acetate filters placed in closed faced Millipore-cassettes. Totally 127 workers; 56 cleaners, 44 cement production workers and 27 controls were randomly selected from two factories and examined for lung function and interviewed for chronic respiratory symptoms in 2009. Of these, 91 workers; 38 cement cleaners (mean age 32 years, 33 cement production workers (36 years and 20 controls (38 years were examined with the same measurements in 2010. Results Total geometric mean dust exposure among cleaners was 432 mg/m3. The fraction of samples exceeding the Threshold Limit Value (TLV of 10 mg/m3 for the cleaners varied from 84-97% in the four departments. The levels were considerably lower among the production workers (GM = 8.2 mg/m3, but still 48% exceeded 10 mg/m3. The prevalence of all the chronic respiratory symptoms among both cleaners and production workers was significantly higher than among the controls. Forced Expiratory Volume in one second (FEV1 and FEV1/Forced Vital Capacity (FEV1/FVC were significantly reduced from 2009 to 2010 among the cleaners (p Conclusions The high prevalence of chronic respiratory symptoms and reduction in lung function is probably associated with high cement dust exposure. Preventive measures are needed to reduce the dust exposure.

Towards a comprehensive approach for managing transitions of older workers with hearing loss.

Science.gov (United States)

Fok, Daniel; Shaw, Lynn; Jennings, Mary Beth; Cheesman, Margaret

2009-01-01

Demographic and legislative trends suggest that many older workers may remain at work past the traditional retirement age. This extended work trajectory poses new challenges and opportunities for workers with acquired hearing loss as they age. Workplaces require a new approach to enable transitions of older workers with hearing loss to remain safe and productive. A review of the literature on older workers, those with hearing loss, and strategies used to accommodate them suggests that individualized and piecemeal approaches are predominant. While universal design represents a fresh ideology that may help create more accessible and usable products and environments, its application to improve workplaces for older workers with hearing loss is limited. This paper proposes that occupational science be integrated with knowledge in hearing sciences, accessibility, and usability to assist with the transitions faced by older workers with hearing loss. A more comprehensive approach including the following three key components will be posited to examine the nexus of aging, hearing loss and work: (1) the use of an occupational perspective, along with concepts in hearing sciences to examine hearing demands and improve hearing access; (2) the use of contextual processes to promote physical and social change, and (3) the inclusion of Universal Design for Hearing (UDH) considerations as stakeholders develop more hearing friendly workplaces.

An Injury Prevention Strategy for Teen Restaurant Workers

Science.gov (United States)

Ward, Julie A.; de Castro, A. B.; Tsai, Jenny Hsin-Chun; Linker, Darren; Hildahl, Lyle; Miller, Mary E.

2011-01-01

High levels of youth employment, workplace hazards, and characteristics unique to adolescents contribute to a relatively high incidence of injuries among teens in the restaurant industry. This article discusses the ProSafety model of injury prevention among teen restaurant workers. Through integration with an existing career and technical education program, the ProSafety project seeks to prevent occupational injuries among the teen worker population through classroom safety education and internship skills reinforcement. ProSafety is the product of an innovative collaboration with occupational health nurses, business professionals, educators, and government. Its approach is derived from Social Cognitive Theory, is consistent with key values and strategies of occupational health nurses, and provides lessons for practitioners seeking to reduce occupational injuries in food service or among other populations of adolescent workers. PMID:20180503

Respiratory tract disease from thermosetting resins. Study of an outbreak in rubber tire workers.

Science.gov (United States)

doPico, G A; Rankin, J; Chosy, L W; Reddan, W G; Barbee, R A; Gee, B; Dickie, H A

1975-08-01

An outbreak of upper and lower respiratory tract inflammatory disease and conjunctivitis among synthetic rubber tire workers occurred. The outbreak began after the introduction of a new thermosetting resin, containing resorcinol and a trimere of methylene aminoacetronitrile, into the rubber tire carcass stock formulation. Two hundred ten workers were affected. Characteristically, symptoms improved during periods of sick leave or vacation, recurring upon the workers' return to the plant. Chest radiograms disclosed pneumonic infiltrates in about one fourth of the cases. Pulmonary function studies detected abnormal airways dynamics as well as abnormal diffusing capacity in more than one third of the workers tested. Lung biopsy showed evidence of focal interstitial fibrosis and peribronchiolar and perivascular chronic inflammatory reaction. The illness was ascribed to volatile products released during the manufacture of synthetic rubber tires. The exact chemical nature of these products is unknown.

Radiocontamination of agricultural workers due to nuclear accidents

International Nuclear Information System (INIS)

Petrovic, B.; Smelcerovic, M.; Djuric, G.; Popovic, D.

1989-01-01

In the radiocontamination of the environment due to nuclear accidents, agricultural workers should be considered as a critical group of population. The presented paper discusses this problem from the aspects of folder production. The values of the effective dose equivalent are estimated for different phases of the production process and certain procedures aimed to reduce the radiation risk are proposed (author)

Radiocontamination of agricultural workers due to nuclear accidents

Energy Technology Data Exchange (ETDEWEB)

Petrovic, B [Faculty of Veterinary Medicine, Beograd, (Serbia and Montenegro); Smelcerovic, M; Djuric, G; Popovic, D [Institute of Nuclear Sciences Boris Kidric, Vinca, Beograd (Serbia and Montenegro)

1989-07-01

In the radiocontamination of the environment due to nuclear accidents, agricultural workers should be considered as a critical group of population. The presented paper discusses this problem from the aspects of folder production. The values of the effective dose equivalent are estimated for different phases of the production process and certain procedures aimed to reduce the radiation risk are proposed (author)

Urinary 1-Hydroxypyrene Levels in Workers Exposed to Polycyclic Aromatic Hydrocarbon from Rubber Wood Burning

Directory of Open Access Journals (Sweden)

Thitiworn Choosong

2014-06-01

Conclusion: The urinary 1-OHP levels of workers exposed to PAHs were high. The accumulation of 1-OHP in the body was not clear although the workers had long working hours with few days off during their working experience. Therefore, a regular day off schedule and rotation shift work during high productive RSS should be set for RSS workers.

Update on worker mortality data at Hanford

International Nuclear Information System (INIS)

Gilbert, E.S.

1979-01-01

The subject of this paper is a study of the effects on mortality of occupational exposure to ionizing radiation at the Hanford plant. The Hanford plant, which is located in southeastern Washington State, was established in the early forties as an installation for plutonium production. Many workers employed by the various contractors hold jobs involving some exposure to radiation. Yearly records of this exposure, obtained from dosimeter readings, as well as occupational data, are maintained for all employees. Mortality data are obtained by having the Social Security Administration periodically search their records for deaths of persons identified in the personnel rosters of Hanford contractors. Published analyses of worker mortality at Hanford have included workers initially employed before 1965 and mortality up to April 1, 1974. In this paper, the mortality data are updated to include deaths up to May 1, 1977, workers employed 1965 and later, and the most recent exposure data. In addition to updating results of earlier analyses, this paper provides a discussion of the problems involved in analyzing and interpreting occupational exposure and mortality data. For a more detailed discussion of these problems the reader is referred to the papers noted above

Whole-body measurements of workers occupationally exposed to radionuclides at IPEN/CNEN-SP

International Nuclear Information System (INIS)

Cardoso, Joaquim Carlos S.; Xavier, Marcos

2013-01-01

The intake of radioactive material by workers can occur in the radiopharmaceuticals production, during the handling of these in the medical fields (nuclear medicine) and in biological and research laboratories. The workers who work in areas where exposures are significant are routinely monitored to demonstrate that the workers are receiving adequate protection from internal contamination. Direct measurements of whole-body and thyroid contents provide an estimate of the activity of these radionuclides in the potentially exposed workers. The whole-body measurements of the workers, trainees and visitors are routinely performed by the In Vivo Monitoring Laboratory (LMIV) of the Energy and Nuclear Research Institute (IPEN/CNEN-SP). The frequency of measurements is defined by the Radioprotection Service (SRP) and the Dose Calculation Group of IPEN. For this purpose LMIV has two counters, whole body. NaIT1 (8x4″), and thyroid one, NaIT1 (3x3″). The system was calibrated in energy and efficiency, with calibration sources of Eu-152, Am-241 and Co-60 with gamma emissions between 59.54 and 1408.08 keV, positioned within Alderson Research Labs. anthropomorphic phantom. The background measures were obtained of worker's spectrum that wasn't exposed occupationally yet. The concepts adopted in the HPS N13.30 Standard and proposed in ISO documents for standardization were used for activity measurements. During the period January 2007 to December 2012, approximately 6700 measurements had been carried in workers who develop tasks related to the production and research. The activities of the radionuclides and the workers' tasks relationship had been evaluated. (author)

World Council of Nuclear Workers

International Nuclear Information System (INIS)

Maisseu, Andre

2007-01-01

WONUC is an association of Trade Unions, Scientific Societies and Social Organizations of the employees, workers and professionals of the nuclear energy related industries and technologies; integrated by 35 Countries and 1.8 millions members. This paper expose the products and services that WONUC provide for the promotion of peaceful uses of nuclear energy and the result of their work around all the world

75 FR 3250 - Glaxosmithkline, Including On-Site Temporary and Leased Workers From Kelly Services, Kelly...

Science.gov (United States)

2010-01-20

... subject firm. The workers are engaged in the production of penicillin-based antibiotics for humans and animals. The company reports that on-site leased workers from Dream Clean, Inc. were employed on-site at...

Nail gun injuries among construction workers.

Science.gov (United States)

Dement, John M; Lipscomb, Hester; Li, Leiming; Epling, Carol; Desai, Tejas

2003-05-01

Pneumatic nail guns greatly increase worker productivity and are extensively used in wood frame building construction, with especially high use in residential construction. One surveillance report of nail gun injuries in Washington State has been published; however, other literature consists largely of case reports and case series in trauma journals. The major objective of the current study was to investigate the occurrence of nail gun-associated injuries among construction workers and to identify preventable work-related factors associated with these injuries. Nail gun-related injuries occurring among a cohort of 13,347 carpenters in Ohio who worked union hours during the time period January 1, 1994, until September 30, 1997, were identified by matching the cohort with workers' compensation claims made to the Ohio Bureau of Workers' Compensation. We also analyzed workers' compensation claims for North Carolina Home Builders Association members for the period July 1996-November 1999 to identify nail gun-related injuries. Analyses included stratified analyses of claims by nature and body part injured, calculation of nail gun injury rates, and analyses of free text descriptions of injuries. Overall, nail gun injuries were responsible for 3.9 percent of workers' compensation claims with 8.3 percent to 25.5 percent of claims involving paid lost work time. The overall rate of nail gun injuries (cases per 200,000 work hours) was 0.33 in North Carolina and 0.26 in Ohio, reflecting the greater concentration of wood frame construction workers in the North Carolina population studied. Higher rates of injury were observed for carpenters in North Carolina and among residential carpenters in Ohio. The predominant body part injured was the hands/fingers, with 80 to 89 percent of injuries being nail punctures. Analyses of free text information for puncture injuries found approximately 70 percent of injuries to occur during the framing/sheathing stage of construction. Our data

Degradation of aqueous phenol solutions by coaxial DBD reactor

Science.gov (United States)

Dojcinovic, B. P.; Manojlovic, D.; Roglic, G. M.; Obradovic, B. M.; Kuraica, M. M.; Puric, J.

2008-07-01

Solutions of 2-chlorophenol, 4-chlorophenol and 2,6-dichlorophenol in bidistilled and water from the river Danube were treated in plasma reactor. In this reactor, based on coaxial dielectric barrier discharge at atmospheric pressure, plasma is formed over a thin layer of treated water. After one pass through the reactor, starting chlorophenols concentration of 20 mg/l was diminished up to 95 %. Kinetics of the chlorophenols degradation was monitored by High Pressure Liquid Chromatography method (HPLC).

An anthropometric study of Serbian metal industry workers.

Science.gov (United States)

Omić, S; Brkić, V K Spasojevic; Golubović, T A; Brkić, A D; Klarin, M M

2017-01-01

There are recent studies using new industrial workers' anthropometric data in different countries, but for Serbia such data are not available. This study is the first anthropometric study of Serbian metal industry workers in the country, whose labor force is increasingly employed both on local and international markets. The metal industry is one of Serbia's most important economic sectors. To this end, we collected the basic static anthropometric dimensions of 122 industrial workers and used principal components analysis (PCA) to obtain multivariate anthropometric models. To confirm the results, the dimensions of an additional 50 workers were collected. The PCA methodology was also compared with the percentile method. Comparing both data samples, we found that 96% of the participants are within the tolerance ellipsoid. According to this study, multivariate modeling covers a larger extent of the intended population proportion compared to percentiles. The results of this research are useful for the designers of metal industry workstations. This information can be used in dimensioning the workplace, thus increasing job satisfaction, reducing the risk of injuries and fatalities, and consequently increasing productivity and safety.

Reproductive toxicity in boron exposed workers in Bandirma, Turkey.

Science.gov (United States)

Başaran, Nurşen; Duydu, Yalçin; Bolt, Hermann M

2012-06-01

Boric acid and sodium borates have been considered as being "toxic to reproduction and development", following results of animal studies with high doses. However unfavorable effects of boron exposure on reproduction and development have not been proved in epidemiological studies so far. The aim of the present study was to investigate the reproductive toxicity indicators in highly exposed workers employed in a boric acid production plant in Bandırma, Turkey. Two hundred and four workers participated in this study. The mean blood boron concentration of the high exposure group of workers was 223.89 ± 69.49 (152.82-454.02)ng/g. Unfavorable effects of boron exposure on the reproductive toxicity indicators were not observed. Copyright © 2012 Elsevier GmbH. All rights reserved.

75 FR 879 - National Semiconductor Corporation Arlington Manufacturing Site Including On-Site Leased Workers...

Science.gov (United States)

2010-01-06

... engaged in activities related to the production of integrated circuits. The company reports that on-site... Corporation Arlington Manufacturing Site Including On-Site Leased Workers From GCA, CMPA (Silverleaf), Custom..., applicable to workers of National Semiconductor Corporation, Arlington Manufacturing Site, including on-site...

Assessment of blood serum immunoglobulin and C-reactive protein concentrations in workers of X-ray diagnostics units

International Nuclear Information System (INIS)

Klucinski, P.; Martirosian, G.; Mazur, B.; Kaufman, J.; Hrycek, A.; Cieslak, P.

2005-01-01

Workers of X-rays departments are occupationally exposed to long-term low levels of ionizing radiation. The aim of the study was to investigate the influence of occupational exposure of low-level X-ray radiation on immunoglobulin and C-reactive protein (CRP) concentrations in radiology workers. In the study group of 41 X-ray department workers and the control group composed of 32 persons, immunoglobulins (IgM, IgG,IgA) and CPR concentrations were analyzed. The study group was subdivided by gender and smoking habit. A significant decrease in IgG level was found in the workers and the female subgroup. The same observation was made when smokers and nonsmokers of both groups were compared. Smoking workers showed lower concentrations of IgA than non-smokers. Occupational exposure to low levels of ionizing radiation is associated with suppressive influence on the immunoglobulin production, especially IgG. In addition, smoking decreases the production of IgA in radiology workers. (author)

The importance of job training to job satisfaction of older workers.

Science.gov (United States)

Leppel, Karen; Brucker, Eric; Cochran, Jeremy

2012-01-01

If job training has positive impacts on worker satisfaction, then job training can have desirable consequences for an organization that result both directly through its effects on productivity and indirectly through its effects on job satisfaction. Furthermore, the aging of the workforce implies that older workers will become increasingly important to firms and to the economy. This study, therefore, seeks to examine the relationship between job training and job satisfaction, focusing in particular on U.S. workers born in 1964 or earlier. The results of ordered logit regression analysis indicate that availability and quality of training received directly affect job satisfaction.

Genuine worker participation-an indispensable key to effective global OHS.

Science.gov (United States)

Brown, Garrett

2009-01-01

Working conditions, including workplace safety, in global supply chains of products sold by transnational corporations have only marginally improved over the last 15 years despite the development of hundreds of corporate "codes of conduct," code monitoring systems, and an elaborate new "corporate social responsibility" industry. The two underlying reasons for the lack of significant change are: 1) a schizophrenic business model which fatally undermines "socially responsible" sourcing programs with unyielding dictates for the lowest possible production costs; and 2) the lack of any meaningful participation by shop-floor workers in plant safety programs. Only when trained, empowered, and active workers are an integral part of workplace safety programs will conditions improve over the long term.

The decision-making process of workers in using sick time.

Science.gov (United States)

Sandal, Candace L; Click, Elizabeth R; Dowling, Donna A; Guzik, Arlene

2014-08-01

The cost of employee absenteeism in the United States is significant in terms of sick pay, overtime costs, replacement personnel compensation, and lost productivity. Little is known about what workers consider when deciding to use sick time. Previous studies have examined work absence from an array of perspectives, including resulting work strain, job satisfaction, and job security, but absenteeism in the workplace has not been examined in terms of decision making. To scrutinize workers' decisions about using sick time, a descriptive pilot study was undertaken with a convenience sample (n = 94) of working college students. The responses to the survey revealed that the majority of the workers (73.4%) used sick time because they were too ill to work. These results are in direct opposition to previous research and suggest that workers may need education about preventing and managing minor illnesses before an absence is needed. Supporting and engaging employees and their significant others in healthy worker programs, regular surveillance examinations, and illness prevention strategies are wise investments in companies' financial futures. Future research should include a comparative study of worker absenteeism between worksites with occupational health nurses and those without nurses. Copyright 2014, SLACK Incorporated.

76 FR 13228 - Steelcase, Inc., North America Division, Including On-Site Leased Workers From Manpower, Inc...

Science.gov (United States)

2011-03-10

... subject firm. The workers are engaged in the production of office furniture. The review shows that on... workers of Steelcase, Inc., Global Headquarters, Grand Rapids, Michigan, separated from employment on or...

Respiratory and skin health among glass microfiber production workers: a cross-sectional study

Directory of Open Access Journals (Sweden)

Jaakkola Maritta S

2009-08-01

Full Text Available Abstract Background Only a few studies have investigated non-malignant respiratory effects of glass microfibers and these have provided inconsistent results. Our objective was to assess the effects of exposure to glass microfibers on respiratory and skin symptoms, asthma and lung function. Methods A cross-sectional study of 102 workers from a microfiber factory (response rate 100% and 76 office workers (73% from four factories in Thailand was conducted. They answered a questionnaire on respiratory health, occupational exposures, and lifestyle factors, and performed spirometry. Measurements of respirable dust were available from 2004 and 2005. Results Workers exposed to glass microfibers experienced increased risk of cough (adjusted OR 2.04, wheezing (adjOR 2.20, breathlessness (adjOR 4.46, nasal (adjOR 2.13 and skin symptoms (adjOR 3.89 and ever asthma (adjOR 3.51, the risks of breathlessness (95%CI 1.68–11.86 and skin symptoms (1.70–8.90 remaining statistically significant after adjustment for confounders. There was an exposure-response relation between the risk of breathlessness and skin symptoms and increasing level of microfiber exposure. Workers exposed to sensitizing chemicals, including phenol-formaldehyde resin, experienced increased risk of cough (3.43, 1.20–9.87 and nasal symptoms (3.07, 1.05–9.00. Conclusion This study provides evidence that exposure to glass microfibers increases the risk of respiratory and skin symptoms, and has an exposure-response relation with breathlessness and skin symptoms. Exposure to sensitizing chemicals increased the risk of cough and nasal symptoms. The results suggest that occupational exposure to glass microfibers is related to non-malignant adverse health effects, and that implementing exposure control measures in these industries could protect the health of employees.

Healthy occupational culture for a worker-friendly workplace.

Science.gov (United States)

Grabovac, Igor; Mustajbegović, Jadranka

2015-03-01

Work has numerous health and wellbeing benefits, but it also involves physical hazards and psychological exertion. Today the scale has tipped toward psychosocial factors. Workers' mental health affects their intellectual, emotional, and social growth, as well as work ability, productivity, and ultimately organisational productivity and competitiveness on the market. Even though companies may have an internal hierarchy that lowers stress at work, there are other formal and informal social processes that can affect (positively or negatively) the cohesion within the work unit. Safety culture of an organisation is a product of individual and group values, opinions, competences, and behavioural patterns that determine how occupational health and safety are implemented. Organisations that nurture positive safety culture understand the importance of health and safety and believe in prevention rather than dealing with consequences. Jobs that are stable, autonomous, and reasonably physically and psychologically demanding are far more likely to lower work-related stress and boost worker satisfaction. In fact, employee empowerment is one of the best ways to achieve good psychosocial health at the workplace.

Degradation mechanisms of 4-chlorophenol in a novel gas-liquid hybrid discharge reactor by pulsed high voltage system with oxygen or nitrogen bubbling.

Science.gov (United States)

Zhang, Yi; Zhou, Minghua; Hao, Xiaolong; Lei, Lecheng

2007-03-01

The effect of gas bubbling on the removal efficiency of 4-chlorophenol (4-CP) in aqueous solution has been investigated using a novel pulsed high voltage gas-liquid hybrid discharge reactor, which generates gas-phase discharge above the water surface simultaneously with the spark discharge directly in the liquid. The time for 100% of 4-CP degradation in the case of oxygen bubbling (7 min) was much shorter than that in the case of nitrogen bubbling (25 min) as plenty of hydrogen peroxide and ozone formed in oxygen atmosphere enhanced the removal efficiency of 4-CP. Except for the main similar intermediates (4-chlorocatechol, hydroquinone and 1,4-benzoquinone) produced in the both cases of oxygen and nitrogen bubbling, special intermediates (5-chloro-3-nitropyrocatechol, 4-chloro-2-nitrophenol, nitrate and nitrite ions) were produced in nitrogen atmosphere. The reaction pathway of 4-CP in the case of oxygen bubbling was oxygen/ozone attack on the radical hydroxylated derivatives of 4-CP. However, in the case of nitrogen bubbling, hydroxylation was the main reaction pathway with effect of N atom on degradation of 4-CP.

Preventive actions taken by workers after workers' health surveillance: a controlled trial.

Science.gov (United States)

Boschman, J S; Van der Molen, H F; Frings-Dresen, M H W; Sluiter, J K

2013-12-01

To evaluate construction workers' preventive actions and occupational physician's (OPs) recommendations after a job-specific workers' health surveillance (WHS) compared with the currently used generic WHS. After the WHS, the OPs' written recommendations were captured. At the 3-month follow-up, the workers were asked about the preventive actions they had undertaken. A generalized linear mixed model was used to compare proportions of workers. At follow-up, the proportion of workers who reported taking preventive actions was significantly higher in the intervention group (80%, 44/55) than in the control group (67%, 80 of 121), (P = 0.04). In the intervention group, the OPs provided a higher proportion of workers with written recommendations (82%, 63 of 77, vs 57%, 69 of 121; P = 0.03). The job-specific WHS aided OPs in providing workers with recommendations and workers in undertaking (job-specific) preventive actions.

ADVANCED WORKER PROTECTION SYSTEM

International Nuclear Information System (INIS)

Judson Hedgehock

2001-01-01

From 1993 to 2000, OSS worked under a cost share contract from the Department of Energy (DOE) to develop an Advanced Worker Protection System (AWPS). The AWPS is a protective ensemble that provides the user with both breathing air and cooling for a NIOSH-rated duration of two hours. The ensemble consists of a liquid air based backpack, a Liquid Cooling Garment (LCG), and an outer protective garment. The AWPS project was divided into two phases. During Phase 1, OSS developed and tested a full-scale prototype AWPS. The testing showed that workers using the AWPS could work twice as long as workers using a standard SCBA. The testing also provided performance data on the AWPS in different environments that was used during Phase 2 to optimize the design. During Phase 1, OSS also performed a life-cycle cost analysis on a representative clean up effort. The analysis indicated that the AWPS could save the DOE millions of dollars on D and D activities and improve the health and safety of their workers. During Phase 2, OSS worked to optimize the AWPS design to increase system reliability, to improve system performance and comfort, and to reduce the backpack weight and manufacturing costs. To support this design effort, OSS developed and tested several different generations of prototype units. Two separate successful evaluations of the ensemble were performed by the International Union of Operation Engineers (IUOE). The results of these evaluations were used to drive the design. During Phase 2, OSS also pursued certifying the AWPS with the applicable government agencies. The initial intent during Phase 2 was to finalize the design and then to certify the system. OSS and Scott Health and Safety Products teamed to optimize the AWPS design and then certify the system with the National Institute of Occupational Health and Safety (NIOSH). Unfortunately, technical and programmatic difficulties prevented us from obtaining NIOSH certification. Despite the inability of NIOSH to certify

ADVANCED WORKER PROTECTION SYSTEM

Energy Technology Data Exchange (ETDEWEB)

Judson Hedgehock

2001-03-16

From 1993 to 2000, OSS worked under a cost share contract from the Department of Energy (DOE) to develop an Advanced Worker Protection System (AWPS). The AWPS is a protective ensemble that provides the user with both breathing air and cooling for a NIOSH-rated duration of two hours. The ensemble consists of a liquid air based backpack, a Liquid Cooling Garment (LCG), and an outer protective garment. The AWPS project was divided into two phases. During Phase 1, OSS developed and tested a full-scale prototype AWPS. The testing showed that workers using the AWPS could work twice as long as workers using a standard SCBA. The testing also provided performance data on the AWPS in different environments that was used during Phase 2 to optimize the design. During Phase 1, OSS also performed a life-cycle cost analysis on a representative clean up effort. The analysis indicated that the AWPS could save the DOE millions of dollars on D and D activities and improve the health and safety of their workers. During Phase 2, OSS worked to optimize the AWPS design to increase system reliability, to improve system performance and comfort, and to reduce the backpack weight and manufacturing costs. To support this design effort, OSS developed and tested several different generations of prototype units. Two separate successful evaluations of the ensemble were performed by the International Union of Operation Engineers (IUOE). The results of these evaluations were used to drive the design. During Phase 2, OSS also pursued certifying the AWPS with the applicable government agencies. The initial intent during Phase 2 was to finalize the design and then to certify the system. OSS and Scott Health and Safety Products teamed to optimize the AWPS design and then certify the system with the National Institute of Occupational Health and Safety (NIOSH). Unfortunately, technical and programmatic difficulties prevented us from obtaining NIOSH certification. Despite the inability of NIOSH to certify

Montessori-based training makes a difference for home health workers & their clients.

Science.gov (United States)

Gorzelle, Gregg J; Kaiser, Kathy; Camp, Cameron J

2003-01-01

Home care visits can last several hours. Home care workers are often at a loss on how to fill time spent in homes of clients. The challenge is how to use this time in ways that are productive and engaging for both clients and home health workers. The authors trained home health aides to implement Montessori-based activities while interacting with clients who have dementia. The results were amazing. Among other positive results, the authors found a statistically significant increase in the amount of pleasure displayed by clients after health workers received training.

Effect of motivational group interviewing-based safety education on Workers' safety behaviors in glass manufacturing.

Science.gov (United States)

Navidian, Ali; Rostami, Zahra; Rozbehani, Nasrin

2015-09-19

Worker safety education using models that identify and reinforce factors affecting behavior is essential. The present study aimed to determine the effect of safety education based on motivational interviewing on awareness of, attitudes toward, and engagement in worker safety in the glass production industry in Hamedan, Iran, in 2014. This was a quasi-experimental interventional study including a total of 70 production line workers at glass production facilities in Hamedan. The workers were randomly assigned to either an intervention or a control group, with 35 workers in each group. Participants in the control group received four one-hour safety education sessions, in the form of traditional lectures. Those in the intervention group received four educational sessions based on motivational group interviewing, which were conducted in four groups of eight to ten participants each. The instruments used included a researcher-developed questionnaire with checklists addressing safety awareness, and attitude and performance, which were completed before and 12 weeks after the intervention. The data were analyzed using descriptive statistics, independent and paired t-tests, and chi-squared tests. Having obtained the differences in scores before and after the intervention, we determined mean changes in the scores of awareness, attitude, and use of personal protective equipment among workers who underwent motivational group interviewing (3.74 ± 2.16, 1.71 ± 3.16, and 3.2 ± 1.92, respectively, p work environment.

Risk of WMSDs in monofunctional and multifunctional workers in a Brazilian footwear company

Directory of Open Access Journals (Sweden)

Wilza Karla dos Santos Leite

Full Text Available Abstract This study aimed to analyze the risk of musculoskeletal disorders in monofunctional and multifunctional workers in a footwear company. The sample comprised 114 workers in the shoe production sector. The method Occupational Repetitive Actions was used to assess the risk of work-related musculoskeletal disorders (WMSDs. Proportional odds models were constructed, relating the risk of WMSDs to the type of work and the worker’s level of multifunctionality. For monofunctional workers, exposure to the higher risk was related to cycle time and the technical actions within their activities, whereas for multifunctional workers, it was related to the range of motion, use of gloves and precision needed in activities. For monofunctional workers, greater risks were associated with a short activity cycle, whereas for multifunctional workers, they were associated with complementary and organizational factors. Moreover, workers whose intracellular activities were less than 30% of the total appeared to be less exposed to the risk of WMSDs.

Differential antennal proteome comparison of adult honeybee drone, worker and queen (Apis mellifera L.).

Science.gov (United States)

Fang, Yu; Song, Feifei; Zhang, Lan; Aleku, Dereje Woltedji; Han, Bin; Feng, Mao; Li, Jianke

2012-01-04

To understand the olfactory mechanism of honeybee antennae in detecting specific volatile compounds in the atmosphere, antennal proteome differences of drone, worker and queen were compared using 2-DE, mass spectrometry and bioinformatics. Therefore, 107 proteins were altered their expressions in the antennae of drone, worker and queen bees. There were 54, 21 and 32 up-regulated proteins in the antennae of drone, worker and queen, respectively. Proteins upregulated in the drone antennae were involved in fatty acid metabolism, antioxidation, carbohydrate metabolism and energy production, protein folding and cytoskeleton. Proteins upregulated in the antennae of worker and queen bees were related to carbohydrate metabolism and energy production while molecular transporters were upregulated in the queen antennae. Our results explain the role played by the antennae of drone is to aid in perceiving the queen sexual pheromones, in the worker antennae to assist for food search and social communication and in the queen antennae to help pheromone communication with the worker and the drone during the mating flight. This first proteomic study significantly extends our understanding of honeybee olfactory activities and the possible mechanisms played by the antennae in response to various environmental, social, biological and biochemical signals. Crown Copyright © 2011. Published by Elsevier B.V. All rights reserved.

The association between socioeconomic characteristics and consumption of food items among Brazilian industry workers.

Science.gov (United States)

Vinholes, Daniele B; Melo, Ione M F; Machado, Carlos Alberto; de Castro Chaves, Hilton; Fuchs, Flavio D; Fuchs, Sandra C

2012-01-01

Dietary pattern plays a causative role in the rising of noncommunicable diseases. The SESI (Serviço Social da Indústria) study was designed to evaluate risk factors for noncommunicable diseases. We aimed to describe food items consumed by Brazilian workers and to assess their association with socioeconomic status. Cross-sectional study was carried out among Brazilian industrial workers, selected by multistage sampling, from 157 companies. Interviews were conducted at the work place using standardized forms. 4818 workers were interviewed, aged 35.4 ± 10.7 years, 76.5% were men. The workers had an average of 8.7 ± 4.1 years of schooling and 25.4 ± 4.1 kg/m² of BMI. Men and individuals with less than high school education were less likely to consume dairy products, fruits, and vegetables daily, even after control for confounding factors. Men consumed rice and beans daily more often than women. In comparison to workers aged 50-76 years, those under 30 years old consumed less fruits and green leafy vegetables daily. The food items consumed by Brazilian workers show that there are insufficient consumption according to the guidelines of healthy foods, particularly of dairy products, vegetables, and fruits.

Workplace health promotion for older workers: a systematic literature review.

Science.gov (United States)

Poscia, Andrea; Moscato, Umberto; La Milia, Daniele Ignazio; Milovanovic, Sonja; Stojanovic, Jovana; Borghini, Alice; Collamati, Agnese; Ricciardi, Walter; Magnavita, Nicola

2016-09-05

Aging of the workforce is a growing problem. As workers age, their physical, physiological and psychosocial capabilities change. Keeping older workers healthy and productive is a key goal of European labor policy and health promotion is a key to achieve this result. Previous studies about workplace health promotion (WHP) programs are usually focused on the entire workforce or to a specific topic. Within the framework of the EU-CHAFEA ProHealth65+ project, this paper aims to systematically review the literature on WHP interventions specifically targeted to older workers (OWs). This systematic review was conducted by making a comprehensive search of MEDLINE, ISI Web of Science, SCOPUS, The Cochrane Library, CINAHL and PsychINFO databases. Search terms included ageing (and synonyms), worker (and synonyms), intervention (and synonyms), and health (and synonyms). The search was limited to papers in English or Italian published between January, 1(st) 2000 and May, 31(st) 2015. Relevant references in the selected articles were also analyzed. Of the 299 articles initially identified as relating to the topic, 18 articles met the inclusion criteria. The type, methods and outcome of interventions in the WHP programs retrieved were heterogenous, as was the definition of the age at which a worker is considered to be 'older'. Most of the available studies had been conducted on small samples for a limited period of time. Our review shows that, although this issue is of great importance, studies addressing WHP actions for OWs are few and generally of poor quality. Current evidence fails to show that WHP programs improve the work ability, productivity or job retention of older workers. In addition, there is limited evidence that WHP programs are effective in improving lifestyles and concur to maintain the health and well-being of older workers. There is a need for future WHP programs to be well-designed so that the effectiveness and cost-benefit of workplace interventions can be

Whole-body measurements of workers occupationally exposed to radionuclides at IPEN/CNEN-SP

International Nuclear Information System (INIS)

Cardoso, Joaquim Carlos S.; Xavier, Marcos

2015-01-01

The intake of radioactive material by workers can occur in the radiopharmaceuticals production, during the handling of these in the medical fields (nuclear medicine) and in biological and research laboratories. The workers who work in areas where exposures are significant are routinely monitored to demonstrate that the workers are receiving adequate protection from internal contamination. Direct measurements of whole-body and thyroid contents provide an estimate of the activity of these radionuclides in the potentially exposed workers. The whole-body measurements of the workers, trainees and visitors are routinely performed by the In Vivo Monitoring Laboratory (LMIV) of the Energy and Nuclear Research Institute (IPEN/CNEN-SP). The frequency of measurements is defined by the Radioprotection Service (SRP) and the Dose Calculation Group of IPEN. For this purpose LMIV has two counters, whole body. NaITl (8 x 4”), and thyroid one, NaITl (3 x 3”). The system was calibrated in energy and efficiency, with calibration sources of Eu-152, Am-241 and Co-60 with gamma emissions between 59.54 and 1408.08 keV, positioned within Alderson Research Labs. anthropomorphic phantom. The background measures were obtained of worker's spectrum that was not exposed occupationally yet. The concepts adopted in the HPS N13.30 Standard and proposed in ISO documents for standardization were used for activity measurements. During the period January 2010 to December 2014, approximately 4500 measurements had been carried in workers who develop tasks related to the production and research. The activities of the radionuclides and the workers' tasks relationship had been evaluated. (author)

Social-demographic profile and dose evaluation of the radiopharmaceutical facility workers

Energy Technology Data Exchange (ETDEWEB)

Sanches, Matias P.; Carneiro, Janete C. Gaburo; Sordi, Gian Maria A.A. [Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN-SP), Sao Paulo, SP (Brazil)], e-mail: msanches@ipen.br

2009-07-01

The main aims of this work are to identify the social-demographic profile of the workers based on stratification variables such as gender, age, and tasks performed by the workers, and to evaluate the annual collective doses of workers with potential risk of ionizing radiation exposure at the workplace during the years 2004 to 2008. In this context, the knowledge of the workforce composition in the facility responsible for the radioisotope production and its distribution was used. The individual monitoring programme has been carried out by individual dosimeters, TLDs, and internal contamination monitoring (in vivo method). The reported doses, in the period studied, suggest that the external exposure was the main source of occupational exposure in radioisotope production and distribution areas. The internal exposure was not included in the doses estimated, because it was negligible. This study has an important exploratory character, in order to analyze possible correlations related to adverse health effects, aiming to provide directions for occupational epidemiology research. (author)

Social-demographic profile and dose evaluation of the radiopharmaceutical facility workers

International Nuclear Information System (INIS)

Sanches, Matias P.; Carneiro, Janete C. Gaburo; Sordi, Gian Maria A.A.

2009-01-01

The main aims of this work are to identify the social-demographic profile of the workers based on stratification variables such as gender, age, and tasks performed by the workers, and to evaluate the annual collective doses of workers with potential risk of ionizing radiation exposure at the workplace during the years 2004 to 2008. In this context, the knowledge of the workforce composition in the facility responsible for the radioisotope production and its distribution was used. The individual monitoring programme has been carried out by individual dosimeters, TLDs, and internal contamination monitoring (in vivo method). The reported doses, in the period studied, suggest that the external exposure was the main source of occupational exposure in radioisotope production and distribution areas. The internal exposure was not included in the doses estimated, because it was negligible. This study has an important exploratory character, in order to analyze possible correlations related to adverse health effects, aiming to provide directions for occupational epidemiology research. (author)

[Features of dyslipidemia development and insulin resistance in female workers engaged in methanol and formaldehyde production].

Science.gov (United States)

Taranenko, L A

2013-01-01

The article covers data on analyzing occupational risk of carbohydrate and lipid metabolism in female workers exosed to methanol and formaldehyde. Findings are that increased contents of the studied chemicals in the air of workplace cause more probable dyslipidemia, insuline resistence in peri-menopausal female workers, these disorders have reliable correlation with occupation.

Radiological Worker Training: Radiological Worker 2 study guides

International Nuclear Information System (INIS)

1992-10-01

Upon completion of this training course, the participant will have the knowledge to work safely in areas controlled for radiological purposes using proper radiological practices. Radiological Worker H Training, for the worker whose job assignment involves entry into Radiological Buffer Areas and all types of Radiation Contamination and Airborne Radioactivity Areas. This course is designed to prepare the worker to work safely in and around radiological areas and present methods to use to ensure individual radiation exposure is maintained As Low As Reasonably Achievable

Respiratory impairment due to asbestos exposure in brake-lining workers

International Nuclear Information System (INIS)

Erdinc, M.; Erdinc, E.; Cok, G.; Polatli, M.

2003-01-01

There is extensive evidence that exposure to asbestos causes pulmonary parenchyma fibrosis, pleural disease, and malignant neoplasm in asbestos-exposed workers. However, few data concerning brake-lining workers are available in the literature. In this study, we aimed to assess the long-term effects of chrysotile asbestos exposure on lung function and the risk of asbestos-related diseases in brake-lining workers. Seventy-four asbestos-exposed workers who processed brake-lining products and 12 unexposed office workers were offered pulmonary function tests (spirometry and transfer actor) in 1992 and 1999. In 1999, the mean duration of asbestos exposure was 0.00±4.07 and 11.02±4.81 years (7-31 years) in non smoking and smoking asbestos workers, respectively. Transfer factor (T L , CO) and transfer coefficient (K CO ) decline were significant in the 7-year follow-up in both smoking and non smoking asbestos workers. However, lung function indices of he control group, whom were all current smokers; were also found to be decreased, including FEF 75 , T L , CO and K CO . We found minimal reticular changes in 10 asbestos workers who were all current smokers, they underwent high-resolution computed tomography scans of the chest and we found that they ad peri bronchial thickening resulting from smoking. As a conclusion, even in the absence of radiographic asbestosis, T L , CO and K CO may decrease after mean 10-year duration of exposure to asbestos in brake-lining workers and this is more noticeable with cigarette burden

Personal exposure to inhalable cement dust among construction workers.

Science.gov (United States)

Peters, Susan; Thomassen, Yngvar; Fechter-Rink, Edeltraud; Kromhout, Hans

2009-01-01

Objective- A case study was carried out to assess cement dust exposure and its determinants among construction workers and for comparison among workers in cement and concrete production.Methods- Full-shift personal exposure measurements were performed and samples were analysed for inhalable dust and its cement content. Exposure variability was modelled with linear mixed models.Results- Inhalable dust concentrations at the construction site ranged from 0.05 to 34 mg/m(3), with a mean of 1.0 mg/m(3). Average concentration for inhalable cement dust was 0.3 mg/m(3) (GM; range 0.02-17 mg/m(3)). Levels in the ready-mix and pre-cast concrete plants were on average 0.5 mg/m(3) (GM) for inhalable dust and 0.2 mg/m(3) (GM) for inhalable cement dust. Highest concentrations were measured in cement production, particularly during cleaning tasks (inhalable dust GM = 55 mg/m(3); inhalable cement dust GM = 33 mg/m(3)) at which point the workers wore personal protective equipment. Elemental measurements showed highest but very variable cement percentages in the cement plant and very low percentages during reinforcement work and pouring. Most likely other sources were contributing to dust concentrations, particularly at the construction site. Within job groups, temporal variability in exposure concentrations generally outweighed differences in average concentrations between workers. 'Using a broom', 'outdoor wind speed' and 'presence of rain' were overall the most influential factors affecting inhalable (cement) dust exposure.Conclusion- Job type appeared to be the main predictor of exposure to inhalable (cement) dust at the construction site. Inhalable dust concentrations in cement production plants, especially during cleaning tasks, are usually considerably higher than at the construction site.

Deterioration of noise-induced hearing loss among bottling factory workers.

Science.gov (United States)

Ologe, F E; Olajide, T G; Nwawolo, C C; Oyejola, B A

2008-08-01

Repeated exposure to excessive noise will eventually lead to an irreversible increase in hearing thresholds. In theory, the damage reflects both the intensity of the noise and the duration of exposure. This is not linear with respect to duration of exposure; rather, the worker may experience a disproportionate loss in the early years of exposure. A prospective study surveying workers of the production section (i.e. most noise-exposed area) of a bottling factory was carried out in December 2003 and in December 2005. A self-administered questionnaire was used to extract information about worker's demographic characteristics, drug intake, and medical and occupational history, as well as information on the use of hearing protection devices. Noise mapping of the various departments of the factory was carried out. Otological examination, tympanometry and audiometry were also carried out on selected subjects. Eighty-four workers, 76 (90.5 per cent) men and eight (9.5 per cent) women, were studied. Their mean age was 33.0 +/- 7.6 years in 2003 and 35.0 +/- 7.6 years in 2005. The recorded noise levels in the factory production section ranged between 91.5 and 98.7 dBA. The prevalence of sensorineural hearing loss among workers was noted to be 64.9 and 86.9 per cent for test one (2003) and test two (2005), respectively. The degree of hearing deterioration within the two years of this study was 1.0-3.2 dB for the right ear and 1.6-3.4 dB for the left ear. This deterioration was at discrete frequencies. More than half (53.6 per cent) of the workers did not have a hearing protection device. Of the 46.4 per cent who did, only 38.5 per cent claimed to have used it regularly. These findings showed that there was a high prevalence of mild sensorineural hearing loss and significant hearing deterioration among workers, due to exposure to excessive noise over a two-year period. The study demonstrates the practical importance of serial audiometry for noise-exposed workers as a means of

Factors affecting extension workers in their rendering of effective ...

African Journals Online (AJOL)

Factors affecting extension workers in their rendering of effective service to pre and ... Small, micro and medium entrepreneurs play an important role in economic ... such as production, marketing and management to adequately service the ...

Performance study of SOL&PID system for the degradation of Acid Red 26 and 4-Chlorophenol

International Nuclear Information System (INIS)

Zhu, Li; Cui, Lingyun; Huang, Qunwu; Wang, Yiping; Vivar, Marta; Jin, Yanchao; Sun, Yong; Cui, Yong; Fan, Jiangyang

2017-01-01

Highlights: • A new water purification system with solar and UV-LED powered by PV was proposed. • UV-LED was driven by PV directly without any transformation. • More than 92% of P_m generated by PV was used to drive UV-LED array. • Visible and near-infra light was converted to UV via PV and UV-LED. • The flowing water makes PV and LED work at lower temperature. - Abstract: To increase the photocatalytic reaction rate and make full use of electricity generated by photovoltaics (PV), a water purification system (SOL&PID) with solar and ultraviolet-light emitting diode (UV-LED) powered by a hybrid PV photocatalytic reactor was designed and tested in this paper. The SOL&PID system is based on Solar Water Purification and Renewable Electricity Generation system (SOLWAT). Photovoltaic and photocatalytic performances of SOL&PID system were evaluated in comparison with SOLWAT by the degradation of Acid Red 26 (AR 26) and 4-chlorophenol (4-CP) using suspended TiO_2. To assess the directly-coupled performance between PV and UV-LED array, the power consumption percentage of UV-LED array from the maximum output power of PV was analyzed. The results show an adequate coupling between the UV-LED array and the photovoltaics. More than 92% of the maximum output power generated by PV modules is used to drive the LED array. The photocatalytic reaction rate constants in SOL&PID system increase respectively 29–37% and 31–78% during AR 26 and 4-CP experiments, in comparison with SOLWAT system. Besides, the SOL&PID system achieved lower solar module temperature and lower UV-LED pin temperature than the reference systems by the addition of flow channel.

Quantitative assessment on the contribution of direct photolysis and radical oxidation in photochemical degradation of 4-chlorophenol and oxytetracycline.

Science.gov (United States)

Liu, Yiqing; He, Xuexiang; Fu, Yongsheng; Dionysiou, Dionysios D

2016-07-01

In UV-254 nm/H2O2 advanced oxidation process (AOP), the potential degradation pathways for organic pollutants include (1) hydrolysis, (2) direct H2O2 oxidation, (3) UV direct photolysis, and (4) hydroxyl radical (HO(•)) reaction. In this study, the contribution of these pathways was quantitatively assessed in the photochemical destruction of 4-chlorophenol (4-CP), demonstrating pathways (3) and (4) to be predominantly responsible for the removal of 4-CP by UV/H2O2 in 50 mM phosphate buffer solution. Increasing reaction pH could significantly enhance the contribution of direct photolysis in UV/H2O2 process. The contribution of HO(•) oxidation was improved with increasing initial H2O2 concentration probably due to the increased formation of HO(•). Presence of sodium carbonate (Na2CO3) as in UV/H2O2/Na2CO3 system promoted the degradation of 4-CP, with carbonate radical (CO3 (•-)) reaction and direct photolysis identified to be the main contributing pathways. The trends in the contribution of each factor were further evaluated and validated on the degradation of the antibiotic compound oxytetracycline (OTC). This study provides valuable information on the relative importance of different reaction pathways on the photochemical degradation of organic contaminants such as 4-CP and OTC in the presence and absence of a CO3 (•-) precursor.

EFFECTS OF EXPOSURE TO HAZARDOUS SUBSTANCES IN POTTERY AND CERAMIC WORKERS

OpenAIRE

BASARAN, Nursen; ANLAR, Hatice Gul; BACANLI, Merve; SHUBAIR, Mohammed; BAL, Ceylan; TUTKUN, Engin; YILMAZ, Hinc

2018-01-01

During the last decade, the production and hence, the amount andthe types of exposure of hazardous chemicals have been increased in theoccupationally exposed workers. Most of these chemicals have deterious effectsin the living systems. The level of chemical exposure in the occupationalsettings and the biomonitoring of workers and also establishing the regulatoryendpoints are very important. The exposures of chemicals in the workplaces havebeen associated with the increase in allergy, organ an...

77 FR 75448 - Notice of Determinations Regarding Eligibility To Apply for Worker Adjustment Assistance

Science.gov (United States)

2012-12-20

... production or sales of the workers' firm; or (B) A loss of business by the workers' firm with the firm..., Remedy Intelligent Staffing. The following certifications have been issued. The requirements of Section...,085 Randstad US, LP, FKA Fort Collins, CO Spherion Staffing, Hewlett- Packard, Business Critical...

Factors affecting workers' delivery of good hygienic and sanitary ...

African Journals Online (AJOL)

ADEYEYE

2015-03-06

Mar 6, 2015 ... training. About two-third of the workers (74.5%) had poor knowledge about good slaughterhouse operations and more than two ... procedures are needed for the production of safe ... method described by Thrusfield (2009).

The work ability index and functional capacity among older workers

Directory of Open Access Journals (Sweden)

Rosimeire S. Padula

2013-08-01

Full Text Available BACKGROUND: Decreases in functional ability due to aging can impair work capacity and productivity among older workers. OBJECTIVE: This study compares the sociodemographics, health conditions, and physical functioning abilities of young and old workers as well as correlates of physical functioning capacity with the work ability index (WAI. METHOD: This exploratory, cross-sectional study examined employees of a higher education institution (HEI and those of a metallurgical industry. Older workers (50 years old or above were matched for gender and occupation type with younger workers (less than 50 years old. The following evaluations were applied: the multidimensional assessment questionnaire (which included sociodemographic, clinical, health perception, and physical health indices, the WAI, and a battery of physical functional tests. RESULTS: Diseases and regularly used medications were more common among the group of aging workers. The WAI did not differ between groups (p=0.237. Both groups showed similar physical functional capacity performances with regard to walking speed, muscle strength, and lower limb physical functioning. Aging workers showed a poorer performance on a test of right-leg support (p=0.004. The WAI was moderately correlated with the sit-to-stand test among older female workers (r=0.573, p=0.051. CONCLUSIONS: Unfavorable general health conditions did not affect the assessment of work ability or most of the tests of physical functional capacity in the aging group.

76 FR 16450 - Management Resources Group, Inc., Including Workers in the States of Georgia and New York...

Science.gov (United States)

2011-03-23

...) there has been a shift by the workers' firm to a foreign country in the production of articles or supply...) there has been an acquisition from a foreign country by the workers' firm of articles/services that are.... Further, the Department determined that workers in the Inventory Services Group, which performs activities...

Impacts of suppression on emotional responses and performance outcomes: an experience-sampling study in younger and older workers.

Science.gov (United States)

Yeung, Dannii Y; Fung, Helene H

2012-11-01

Past studies have demonstrated that older adults used less emotional suppression to regulate their emotions than did younger adults, but the effectiveness of using this emotion regulatory strategy on psychosocial well-being across age remains largely unexplored. The present study adopted an experience-sampling method to examine whether the impacts of momentary employment of emotional suppression on momentary positive and negative emotions and job performance would be different by age. Eighty-seven Chinese insurance workers, aged between 18 and 61 years, participated in a 5-day sampling study. Their affective responses at work, momentary task performance, and sales productivity were recorded. Results showed that older workers' greater use of suppression at work was associated with lower intensity of negative emotions, whereas such association was not found among younger workers. Moreover, greater use of suppression over the sampling period was significantly predictive of sales productivity of older workers, but such a positive association was not shown in younger workers. These findings reveal that the use of suppression at work may be more effective for older workers than for younger workers.

Worker participation - the Netherlands

OpenAIRE

Kwantes, J.H.

2014-01-01

Worker participation relates to the involvement of workers in the management decision-making processes. In this article attention is focused on worker participation related to occupational safety and health in the Netherlands. Worker participation can refer either to direct or indirect participation by the worker. Indirect participation involves employee representation, while direct participation relates to individual involvement in management’s decision-making processes. In the Framework Dir...

76 FR 5834 - Notice of Determinations Regarding Eligibility to Apply for Worker Adjustment Assistance

Science.gov (United States)

2011-02-02

..., 2009. System, Pennsylvanian Medical Transcriptionist, Work from Home. 74,972 CEVA Logistics, U.S... or proportion of the workers in such workers' firm have become totally or partially separated, or are threatened to become totally or partially separated; (2) the sales or production, or both, of such firm have...

Why Workers Are Reluctant Learners: The Case of the Canadian Pulp and Paper Industry.

Science.gov (United States)

Bratton, John A.

2001-01-01

In the Canadian pulp/paper industry, management is focused on worker flexibility for productivity. Unions view workplace learning as a threat to job control and security. Although learning new skills enhances individual workers' flexibility and employability, collectively it weakens the union through job losses. (Contains 56 references.) (SK)

76 FR 72978 - Whirlpool Corporation Including On-Site Leased Workers From Career Solutions TEC Staffing...

Science.gov (United States)

2011-11-28

... DEPARTMENT OF LABOR Employment and Training Administration [TA-W-74,593] Whirlpool Corporation Including On-Site Leased Workers From Career Solutions TEC Staffing, Andrews International, IBM Corporation... workers are engaged in the production of refrigerators and trash compactors. The notice was published in...

Worker participation - the Netherlands

NARCIS (Netherlands)

Kwantes, J.H.

2014-01-01

Worker participation relates to the involvement of workers in the management decision-making processes. In this article attention is focused on worker participation related to occupational safety and health in the Netherlands. Worker participation can refer either to direct or indirect participation

Lipid peroxidation in workers exposed to hexavalent chromium.

Science.gov (United States)

Huang, Y L; Chen, C Y; Sheu, J Y; Chuang, I C; Pan, J H; Lin, T H

1999-02-26

The aim of this study was to investigate whether exposure to hexavalent chromium induces lipid peroxidation in human. This study involved 25 chrome-plating factory workers and a reference group of 28 control subjects. The whole-blood and urinary chromium concentrations were determined by graphite furnace atomic absorption spectrophotometry. Malondialdehyde (MDA), the product of lipid peroxidation, was determined by high-performance liquid chromatography, and the activities of protective enzymes were measured by ultraviolet-visible spectrophotometry. In the chrome-plating workers, the mean concentrations of chromium in blood and urine were 5.98 microg/L and 5.25 microg/g creatinine, respectively; the mean concentrations of MDA in blood and urine were 1.7 micromol/L and 2.24 micromol/g creatinine. The concentrations of both chromium and MDA in blood and urine were significantly higher in the chromium-exposed workers. The activities of superoxide dismutase (SOD), glutathione peroxidase (GPX), and catalase (CAT) were not markedly different between control and exposed workers. Data suggest that MDA may be used as a biomarker for occupational chromium exposure. Antioxidant enzymic activities are not a suitable marker for chromium exposure.

Workers' Education Methods and Techniques for Rural Workers and Their Organisations: Summary of Views Expressed

Science.gov (United States)

Labour Education, 1975

1975-01-01

Several issues concerning rural workers' organizations and workers' education are discussed: motivation for self-organization, workers' education needs of rural workers, workers' education methods and techniques, training institutions and training personnel, financial resources, and the role of the International Labor Organization workers'…

75 FR 28657 - Investigations Regarding Certifications of Eligibility To Apply for Worker Adjustment Assistance

Science.gov (United States)

2010-05-21

.../26/10 04/21/10. 73990 Trinity North American Fort Worth, TX........ 04/26/10 04/23/10. Freight Car.... (Workers). 73996 General Electric Company Owensboro, KY......... 04/27/10 04/23/10. (Company). 73997... Electric Control Morrison, IL 04/28/10 04/26/10. Products (Company). 74011 Kennametal, Inc. (Workers...

The prevalence of byssinosis among cotton workers in the north of Benin.

Science.gov (United States)

Hinson, A V; Schlünssen, V; Agodokpessi, G; Sigsgaards, T; Fayomi, B

2014-10-01

Cotton is the main agricultural export product in Benin. Cotton dust is thus present in the air during the handling and processing of cotton. This dust contains a mixture of substances including ground up plant matter, fibres, bacteria, fungi, soil, pesticides, noncotton matter, and other contaminants. While cotton processing is decreasing in industrialized countries, it is increasing in developing countries. Cotton processing, particularly in the early processes of spinning, can cause byssinosis. To determine the respiratory effects of cotton dust exposure among cotton mill workers in Benin. In a cross-sectional study, 109 workers exposed to cotton dust and 107 unexposed workers were studied. The International Commission on Occupational Health (ICOH) questionnaire was used for data collection on respiratory symptoms. For each worker, crossshift pulmonary function was performed with a dry spirometer. Based on the severity of respiratory symptoms and spirometry byssinosis was defined and classified according to the criteria of Schilling, et al. The mean ± SD age of the exposed and unexposed workers was 46.3 ± 7.8 and 37.0 ± 8.3 years, respectively (pcotton mill workers in Benin is high and needs prompt attention of health care workers and policymakers.

78 FR 42804 - Whirlpool Corporation, Including On-Site Leased Workers From Aerotek/Tek Systems (Subcontractor...

Science.gov (United States)

2013-07-17

... DEPARTMENT OF LABOR Employment and Training Administration [TA-W-82,346] Whirlpool Corporation, Including On-Site Leased Workers From Aerotek/Tek Systems (Subcontractor of IBM Corporation) and Jones Lang... firm. The workers were engaged in production of refrigerators and trash compactors as well as...

Dermatologic Diseases in Silk Workers

Directory of Open Access Journals (Sweden)

J S Pasricha

1985-01-01

Full Text Available A survey of 112 workers of a silk facory near Bangalore, for dermatologic diseases revealed (1 a characteristic wearing off of the medial halves of the distal free edges of the finger nail plates in 10 of the 15 cocoonsorters, (2 maceration of the palms in 58 workers of the boiling and reeling section, and (3 pitted keratolysis of the palms, in 42 workers, also from the boiling and reeling section. There was no clinical evidence of contact dermatitis, and patch tests with the silk thread from the cocoons in 25 workers showed a very mild reaction in 2 workers and a doubtful reaction in another two. In addition, one worker from the skeining section had crisscross superficial fissures on the finger tips caused by friction, two workers had paronychia ′of the fingers and four workers had dermatophytFNx01t fingers webs. As in the previous survey, these workers also had a high incidence of ichthyosis (92 workers and hyperketatosis of the palms (62 workers and soles (110 workers.

The triumph and decline of the "squares": Grumman Aerospace engineers and production workers in the Apollo era, 1957--1973

Science.gov (United States)

Onkst, David Hugh

This dissertation is a social, cultural, and economic history of the men and women of the Grumman Aerospace Company of Bethpage, New York from 1957 through 1973. These "Grummanites" were the engineers and production workers who designed and built the Apollo Lunar Modules that allowed humans to land on the Moon. This study provides unique insights into the impact that the Apollo Program---a large state-initiated and -supported program---had on those "squares," people whom many contemporaries saw as a vital part of mainstream 1960s American society. By the beginning of the Space Age in 1957, Grumman, Long Island's single largest employer, had firmly established a workplace culture of paternalism that Grummanites largely embraced. Company officials believed strongly in worker retention and had established a policy of providing every sort of benefit their employees seemingly desired, including a highly personal and participatory form of management. Many Grummanites had joined the firm during the early years of the Apollo Program because they believed in the promise of permanent employment on exciting projects that would explore the endless frontier of space. But, as many of these mainly self-reliant, individualistic "squares" would bitterly discover, their dedication to Grumman did little to secure their livelihoods during the aerospace industry's early 1970s downsizing; their individual successes were too largely tied to federal spending and declined when Americans grew disenchanted with space exploration. This dissertation demonstrates how the cultural bond of paternalism between aerospace workers and their company unraveled in the 1960s, and then ended in the early 1970s, because of forces within the company, the economy, and the American state. The word "triumph" in this study's title not only applies to Grummanites' triumphs with the Lunar Modules, but also their individual socioeconomic victories. The term "decline" refers to the early 1970s downsizing of more

How Building Systems Affect Worker Wellness

Science.gov (United States)

1994-03-01

spatial configuration must strike a balance between the objective needs of the organization and the more subjective human ingredient. Good building...sense, building design for thermal comfort involves a balance between the building’s orientation, its windowing scheme, the use of thermal mass, and the...stated above. An improved quality of worklife and a humanized work environment are psychological incentives that can increase productivity. Worker specific

Asbestos related diseases among workers of asbestos processing plants in relation to type of production and asbestos use.

Science.gov (United States)

Szeszenia-Dąbrowska, Neonila; Świątkowska, Beata; Sobala, Wojciech; Szubert, Zuzanna; Wilczyńska, Urszula

2015-01-01

Asbestos dust is one of the most dangerous pneumoconiotic and carcinogenic agents. The aim of this study was to assess the occurrence of asbestosis and pleural mesothelioma, depending on asbestos consumption and the type of manufactured products, among former asbestos workers in Poland. The study subjects included employees of 18 large state-owned asbestos processing enterprises operating in the Polish market in 1945-1998. The study is based on data obtained from asbestos company records and the Central Register of Occupational Diseases data on the cases of asbestosis and mesothelioma for the period from 1970 till 2012 as well as data from Amiantus Programme. The analysis was performed for 5 sectors comprising plants classified according to the products manufactured and applied production technology. In the study period, 2160 cases of asbestosis and 138 cases of mesothelioma were reported. The plants processed a total of about 2 million tons of asbestos, including about 7.5% of crocidolite. Total asbestosis consumption was a strong predictor of the rate of asbestosis incidence (R2 = 0.68, p = 0.055). The highest risk occurrence of asbestosis was observed in the production of textiles and sealing products. Mesothelioma occurred only in plants where crocidolite had been ever processed. Total asbestos consumption was a strong predictor of the rate of asbestosis incidence. The observation confirms the relationship between exposure to crocidolite and the occurrence of mesothelioma, regardless of the manufactured products, and suggests the absence of such a link for the total volume of asbestos consumption.

Personal exposure to wood dust among workers in NekaChoob factory in 2013

Directory of Open Access Journals (Sweden)

Mahmoud Mohammadyan

2014-12-01

Full Text Available Background and Purpose: Inhalation of hardwood dust may produce a range of adverse health effects in the upper and lower respiratory system, including asthma, along with Sino-nasal cancer and nasopharyngeal cancer. This study was carried out to evaluate personal exposure to wood dust among workers in chipboard and furniture production saloons in Neka Choob factory, Iran. Materials and Methods: Gravimetric method No. 0500 recommended by National Institute for Occupational Safety and Health was used to determine the wood dust concentrations in the workers’ breathing zone. The sampling air was drawn through a polyvinyl chloride filter within the breathing zone, using a calibrated personal sampling pump. Results: The mean workers’ personal exposure to wood dust in furniture production saloon (2.87 ± 1.95 mgm-3 was higher than mean exposure of workers whom were working in chipboard saloon (0.93 ± 0.35 mgm-3. The mean workers’ exposure to wood dust for both saloons was 1.70 ± 1.53 mgm-3. Conclusion: The mean workers’ personal exposure to wood dust in Neka Choob factory was higher than Occupational Exposure Limit (OEL recommended by national (Iranian Committee for Review and Collection of OEL and European ::union:: Scientific Committee on OEL committees. All workers in furniture production saloon and three workers in chipboard saloon have a mean exposure higher than OEL.

Distribution of radium-226 body burden among workers in an underground uranium mine in India

International Nuclear Information System (INIS)

Patnaik, R.L.; Srivastava, V.S.; Kumar, Rajesh; Shukla, A.K.; Tripathi, R.M.; Puranik, V.D.

2007-01-01

Workers are exposed to ore dust containing uranium and its daughter products during mining and processing of uranium ore. These radio nuclides may be an inhalation hazard to the workers during the course of their occupation. The most significant among these radio nuclides is 226 Ra. Measurement of radium body burden of uranium mine and mill workers are important to control the exposure of workers within the prescribed limit. Radon-in-breath measurement technique is used for measurement of radium body burden. Workers associated with different category of underground mining operations were monitored. The measurement results indicate that workers associated with different category of underground mining operations are having 226 Ra body burden ranging from 0.15 - 2.85 kBq. It was also observed that workers involved in timbering operation are having maximum average 226 Ra body burden of 0.97 ± 0.54 kBq. Overall average radium body burden observed for 683 workers is 0.80 kBq. (author)

Photocatalytic activity of porous multiwalled carbon nanotube-TiO{sub 2} composite layers for pollutant degradation

Energy Technology Data Exchange (ETDEWEB)

Zouzelka, Radek [J. Heyrovsky Institute of Physical Chemistry, v.i.i., Academy of Sciences of the Czech Republic, Dolejskova 3, 18223 Prague 8 (Czech Republic); Department of Physical Chemistry, University of Chemistry and Technology Prague, 16628 Prague (Czech Republic); Kusumawati, Yuly [Chimie ParisTech, PSL Research University, CNRS, Institut de Recherche de Chimie Paris (IRCP), 11 rue Pierre et Marie Curie, 75005 Paris (France); Remzova, Monika [J. Heyrovsky Institute of Physical Chemistry, v.i.i., Academy of Sciences of the Czech Republic, Dolejskova 3, 18223 Prague 8 (Czech Republic); Department of Physical Chemistry, University of Chemistry and Technology Prague, 16628 Prague (Czech Republic); Rathousky, Jiri [J. Heyrovsky Institute of Physical Chemistry, v.i.i., Academy of Sciences of the Czech Republic, Dolejskova 3, 18223 Prague 8 (Czech Republic); Pauporté, Thierry, E-mail: thierry.pauporte@chimie-paristech.fr [Chimie ParisTech, PSL Research University, CNRS, Institut de Recherche de Chimie Paris (IRCP), 11 rue Pierre et Marie Curie, 75005 Paris (France)

2016-11-05

Highlights: • A simple method for TiO{sub 2}/graphene nanocomposite layer preparation. • Stable coatings on glass substrate. • Mesoporous nanocomposite films with high internal surface area. • High photoactivity for 4-chlorophenol degradation. • Analysis of photocatalysis enhancement mechanism. - Abstract: TiO{sub 2} nanoparticles are suitable building blocks nanostructures for the synthesis of porous functional thin films. Here we report the preparation of films using brookite, P25 titania and anatase pristine nanoparticles and of nanocomposite layers combining anatase nanoparticles and multi-walled carbon nanotube (MWCNT) at various concentrations. The structure and phase composition of the layers were characterized by X-ray diffraction and Raman spectroscopy. Their morphology and texture properties were determined by scanning electron microscopy and krypton adsorption experiments, respectively. Additionally to a strong absorption in the UV range, the composites exhibited light absorption in the visible range as well. The photocatalytic performance of the layers was tested in the degradation of aqueous solutions of 4-chlorophenol serving as a model of an eco-persistent pollutant. Besides the determination of the decrease in the concentration of 4-chlorophenol, also the formation of intermediate degradation products, namely hydroquinone and benzoquinone, was followed. The presence of MWCNTs had a beneficial effect on the photocatalytic performance, a marked increase in the photocatalytic degradation rate constant being observed even at very low concentrations of MWCNTs. Compared to a P25 reference layer, the first order rate reaction constant increased by about 100% for the composite films containing MWCNTs at concentrations above 0.6 wt%. The key parameters for the enhancement of the photocatalytic performance are discussed. The presence of carbon nanotubes influences beneficially the degradation of 4-chlorophenol by an attack of the primarily

Oxidative DNA damage during sleep periods among nightshift workers.

Science.gov (United States)

Bhatti, Parveen; Mirick, Dana K; Randolph, Timothy W; Gong, Jicheng; Buchanan, Diana Taibi; Zhang, Junfeng Jim; Davis, Scott

2016-08-01

Oxidative DNA damage may be increased among nightshift workers because of suppression of melatonin, a cellular antioxidant, and/or inflammation related to sleep disruption. However, oxidative DNA damage has received limited attention in previous studies of nightshift work. From two previous cross-sectional studies, urine samples collected during a night sleep period for 217 dayshift workers and during day and night sleep (on their first day off) periods for 223 nightshift workers were assayed for 8-hydroxydeoxyguanosine (8-OH-dG), a marker of oxidative DNA damage, using high-performance liquid chromatography with electrochemical detection. Urinary measures of 6-sulfatoxymelatonin (aMT6s), a marker of circulating melatonin levels, and actigraphy-based sleep quality data were also available. Nightshift workers during their day sleep periods excreted 83% (p=0.2) and 77% (p=0.03) of the 8-OH-dG that dayshift workers and they themselves, respectively, excreted during their night sleep periods. Among nightshift workers, higher aMT6s levels were associated with higher urinary 8-OH-dG levels, and an inverse U-shaped trend was observed between 8-OH-dG levels and sleep efficiency and sleep duration. Reduced excretion of 8-OH-dG among nightshift workers during day sleep may reflect reduced functioning of DNA repair machinery, which could potentially lead to increased cellular levels of oxidative DNA damage. Melatonin disruption among nightshift workers may be responsible for the observed effect, as melatonin is known to enhance repair of oxidative DNA damage. Quality of sleep may similarly impact DNA repair. Cellular levels of DNA damage will need to be evaluated in future studies to help interpret these findings. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/

Workers' opinions on the effect of contact with health care providers on sickness absence duration

NARCIS (Netherlands)

Steenbeek, R.

2014-01-01

Background: Because of the aging working population and the increasing age of retirement the number of workers with chronic illnesses and disabilities is growing. It is important that workers with health complaints receive efficient health care in order to remain fully or at least partly productive.

Effects of consumption of a fermented dairy product containing the probiotic Lactobacillus casei DN-114 001 on common respiratory and gastrointestinal infections in shift workers in a randomized controlled trial.

Science.gov (United States)

Guillemard, Eric; Tanguy, Jérôme; Flavigny, Ann'Laure; de la Motte, Stephan; Schrezenmeir, Juergen

2010-10-01

The risk of infection may be increased in people under stress such as shift workers. This study examined the effect of a fermented dairy product containing the probiotic Lactobacillus casei DN-114 001 (verum) on the incidence of respiratory and gastrointestinal common infectious diseases (CIDs) and on immune functions in healthy shift workers. The study was single-center, randomized, double-blind, and controlled. Volunteers received 200 g/day of verum (n = 500) or control product (n = 500) for 3 months; 1-month follow-up was carried out. The cumulated number of CIDs (primary outcome) was not significantly different between groups. Because the Poisson distribution of the primary parameter did not fully fit the observed data, a post hoc categorical analysis was applied and showed a significantly lower cumulated number of CIDs in the verum group during the product consumption phase (odds ratio [OR] = 0.75, 95% confidence interval [CI] 0.59-0.95, p = 0.017). Verum also reduced the proportion of volunteers experiencing at least 1 CID (43% vs. 51%, p = 0.005), increased the time to the first occurrence of CID (p = 0.017) in the whole population, and reduced the cumulated number of CIDs in the subgroup of smokers (p = 0.033). In the course of CID, cumulated duration of fever was lower in the verum group (in the whole study phase) (p = 0.022), and an increase in leukocyte, neutrophil, and natural killer (NK) cell counts and activity (p = 0.047 to p fermented dairy product containing Lactobacillus casei DN-114 001 could reduce the risk of common infections in stressed individuals such as shift workers.

The Kaizen Connection: How Companies Pick Tomorrow's Workers.

Science.gov (United States)

Feuer, Dale; Lee, Chris

1988-01-01

Kaizen is a Japanese management concept that means gradual, ongoing improvement involving everyone from top management to production workers. This concept is starting to appear in American companies, and it requires the personnel department to do a much more thorough assessment of job applicants, testing for leadership skills, interpersonal…

Depression, anxiety and stress levels in industrial workers: A pilot study in Bangalore, India

Directory of Open Access Journals (Sweden)

Sheldon Rao

2015-01-01

Full Text Available Background: Mental health disorders affect around 500 million people worldwide. In India, around 10-12% of people are affected by a mental disorder either due to stress, depression, anxiety, or any other cause. Mental health of workers affects the productivity of the workplace, with estimates putting these losses to be over 100 million dollars annually. Aims: The study aims to measure depression, anxiety, and stress levels of workers in an industry and to investigate if it has any effect on productivity of the firm. Materials and Methods: The study utilized a cross-sectional design and was conducted among workmen of the firm. A sociodemographic based questionnaire and a mental health screening tool -Depression Anxiety Stress Scale (DASS-21 were used for the same. A total of 90 completed questionnaires were analyzed for the study. The data was analyzed for central tendencies as well as for any associations and correlations. Results: The study showed that none of the workers had a positive score for depression. It also showed that around 36% of the workers had a positive score for anxiety and 18% of the workers had a positive score for stress on DASS-21 scale. The odds ratio between stress and number of leaves taken by a worker in the last 3 months suggested a dose-response relationship, but was statistically insignificant. Conclusion: The study found a prevalence rate of around 18-36% for anxiety and stress amongst the workers at the factory. Large-scale studies will help understand the effect mental health status has on the Indian workplace.

The Connection between Employee Basic Skills & Productivity. Workforce & Workplace Literacy Series.

Science.gov (United States)

BCEL Brief, 1993

1993-01-01

The experience of a number of specific local workplace programs indicates a definite connection between the provision of employee basic skills programs and increased worker productivity. One Tennessee company, for example, reports a 95 percent drop in costs resulting from worker mistakes and a doubling of worker productivity since the company…

Production of wood vinegars from coconut shells and additional materials for control of termite workers, Odontotermes sp. and striped mealy bugs, Ferrisia virgata

Directory of Open Access Journals (Sweden)

Sunan Wititsiri

2011-06-01

Full Text Available Coconut shells and coir are considered as wastes of coconut based products that have not been utilized efficiently.By using these abundant bioresources, which are widely available in Thailand, as raw materials, we were able to producewood vinegars that may be alternatives to termiticides and pesticides. The wood vinegars were obtained from carbonizationprocess using a 200-liter fuel tank as charcoal brazier under temperatures of 300-400°C. In this study, termiticidal and pesticidalactivities of wood vinegars were evaluated against termite workers, Odontotermes sp., and striped mealy bugs, Ferrisiavirgata, using direct contact application. Percent mortalities in the experiments were recorded after 24 hours and correctedfor control mortality with Abbott’s formula. Wood vinegars of 850, 696, and 898 milliliters were produced from coconut shell(wood vinegar A and the mixture of coconut shell and coir (wood vinegar B and the mixture of coconut shell, coir and holybasil (wood vinegar C, respectively. Wood vinegar A exhibited high termiticidal activity against termite workers at a dilutionof 1:50, wood vinegar: sterile water (v/v. By this way, 85% (81.71% corrected mortality of termite workers were killed afterthe 24 hours of test. At a dilution of 1:10, both wood vinegar A and B had exhibited high pesticidal activities against mealybugs, 96% (95.12% corrected mortality of striped mealy bugs were killed by those wood vinegars. In the weakest termiticidaland pesticidal activities, wood vinegar C was able to kill 60% (51.22% corrected mortality of termite workers at a dilution of1:50 within 24 hours. Also it killed 93% (91.89% corrected mortality of striped mealy bugs with a dilution of 1:10 (v/v withinthe same amount of time. Post-hoc comparisons (Tukey test revealed that wood vinegar A possessed the most effectivetermiticidal activity against termite workers. However, a similarity in high pesticidal activity was found among three woodvinegars

Respiratory Symptoms and Lung Function in Poultry Confinement Workers in Western Canada

OpenAIRE

Kirychuk, Shelley P; Senthilselvan, Ambikaipakan; Dosman, James A; Juorio, Victor; Feddes, John JR; Willson, Philip; Classen, Henry; Reynolds, Stephen J; Guenter, Wilhelm; Hurst, Thomas S

2003-01-01

OBJECTIVE: To determine whether poultry production methods impact respiratory health, and whether poultry farmers have more respiratory symptoms and lower lung function than comparison control groups.DESIGN: Cross-sectional study.SETTING: Provinces of Saskatchewan, Alberta and Manitoba during the winters of 1997 to 1999. POPULATION: Three hundred three poultry workers, 241 grain farmers and 206 nonfarming control subjects were studied. Poultry workers were further classified according to the ...

The Prevalence of Byssinosis among Cotton Workers in the North of Benin

Directory of Open Access Journals (Sweden)

AV Hinson

2014-09-01

Full Text Available Background: Cotton is the main agricultural export product in Benin. Cotton dust is thus present in the air during the handling and processing of cotton. This dust contains a mixture of substances including ground up plant matter, fibres, bacteria, fungi, soil, pesticides, noncotton matter, and other contaminants. While cotton processing is decreasing in industrialized countries, it is increasing in developing countries. Cotton processing, particularly in the early processes of spinning, can cause byssinosis. Objective: To determine the respiratory effects of cotton dust exposure among cotton mill workers in Benin. Methods: In a cross-sectional study, 109 workers exposed to cotton dust and 107 unexposed workers were studied. The International Commission on Occupational Health (ICOH questionnaire was used for data collection on respiratory symptoms. For each worker, crossshift pulmonary function was performed with a dry spirometer. Based on the severity of respiratory symptoms and spirometry byssinosis was defined and classified according to the criteria of Schilling, et al. Results: The mean±SD age of the exposed and unexposed workers was 46.3±7.8 and 37.0±8.3 years, respectively (p<0.001. The mean FEV1 predicted value for the exposed and unexposed workers was 76.3% and 77.3%, respectively. The prevalence of grade 3 byssinosis was 21.1% (95% CI: 13.4–28.9 in exposed workers and 8.4% (95% CI: 3.1–13.7 in unexposed workers (p=0.006. On Mondays, the exposed workers had more respiratory symptoms than unexposed workers; for grade 3 byssinosis, the prevalence was 13.8% in exposed and 4.7% in unexposed workers (p=0.011. Conclusion: The prevalence of respiratory symptoms and byssinosis among cotton mill workers in Benin is high and needs prompt attention of health care workers and policymakers.

Agreement among the Productivity Components of Eight Presenteeism Tests in a Sample of Health Care Workers.

Science.gov (United States)

Thompson, Angus H; Waye, Arianna

2018-06-01

Presenteeism (reduced productivity at work) is thought to be responsible for large economic costs. Nevertheless, much of the research supporting this is based on self-report questionnaires that have not been adequately evaluated. To examine the level of agreement among leading tests of presenteeism and to determine the inter-relationship of the two productivity subcategories, amount and quality, within the context of construct validity and method variance. Just under 500 health care workers from an urban health area were asked to complete a questionnaire containing the productivity items from eight presenteeism instruments. The analysis included an examination of test intercorrelations, separately for amount and quality, supplemented by principal-component analyses to determine whether either construct could be described by a single factor. A multitest, multiconstruct analysis was performed on the four tests that assessed both amount and quality to test for the relative contributions of construct and method variance. A total of 137 questionnaires were completed. Agreement among tests was positive, but modest. Pearson r ranges were 0 to 0.64 (mean = 0.32) for Amount and 0.03 to 0.38 (mean = 0.25) for Quality. Further analysis suggested that agreement was influenced more by method variance than by the productivity constructs the tests were designed to measure. The results suggest that presenteeism tests do not accurately assess work performance. Given their importance in the determination of policy-relevant conclusions, attention needs to be given to test improvement in the context of criterion validity assessment. Copyright © 2018 International Society for Pharmacoeconomics and Outcomes Research (ISPOR). Published by Elsevier Inc. All rights reserved.

The effect of different exposed facets on the photoelectrocatalytic degradation of o-chlorophenol using p-type Cu_2O crystals

International Nuclear Information System (INIS)

Sang, Wenjing; Zhang, Gong; Lan, Huachun; An, Xiaoqiang; Liu, Huijuan

2017-01-01

Although it is known that the efficacy of photoelectrocatalysts is enhanced by increasing the amount of high energy surface exposed, the development of a universal synthesis method with both superior activity and simplicity is needed for scalable applications. We herein controllably fabricated cuprous oxide (Cu_2O) micro crystals with different morphologies, evolving from cubes, cuboctahedra, truncated octahedra and finally to octahedra on indium tin oxide (ITO) glass substrates, by a facile electrochemical deposition method. The structures of facet-engineered Cu_2O samples and the underlying mechanism for the morphology evolution were investigated. The separation of photogenerated hole-electron pairs on Cu_2O crystals with different exposed facets was characterized by measuring the photocurrent densities with chopped illumination, which increased with the increased concentrations of PVP: the octahedral Cu_2O crystals, with the highest proportion of {111} facets exposed, exhibited the lowest electro-hole recombination in contrast to the cubes, cuboctahedra, and truncated octahedra, respectively. The photoelectrocatalytic degradation efficiency of the o-chlorophenol (2-CP) pollutant under sunlight irradiation with Cu_2O-coated photocathode was further investigated to reveal the effect of different exposed facets. Due to the increased number of surface active sites available for degradation reactions, the octahedral Cu_2O microcrystals presented higher photoelectrocatalytic activity compared to other shapes. Active oxygen species detected by electron spin-resonance (ESR) spectrometry implied that abundant superoxide radicals (O_2"●"−) were the dominant active radicals in the degradation.

75 FR 43556 - Badger Meter, Inc., Including On-Site Leased Workers From Sourcepoint Staffing, Seek, and...

Science.gov (United States)

2010-07-26

... DEPARTMENT OF LABOR Employment and Training Administration [TA-W-73,666] Badger Meter, Inc... of Badger Meter, Inc., including on-site leased workers from Sourcepoint Staffing, Milwaukee... workers are engaged in the production of flow measurement devices and automatic meter reading equipment...

Non-occupational physical activity levels of shift workers compared with non-shift workers

Science.gov (United States)

Loef, Bette; Hulsegge, Gerben; Wendel-Vos, G C Wanda; Verschuren, W M Monique; Bakker, Marije F; van der Beek, Allard J; Proper, Karin I

2017-01-01

Objectives Lack of physical activity (PA) has been hypothesised as an underlying mechanism in the adverse health effects of shift work. Therefore, our aim was to compare non-occupational PA levels between shift workers and non-shift workers. Furthermore, exposure–response relationships for frequency of night shifts and years of shift work regarding non-occupational PA levels were studied. Methods Data of 5980 non-shift workers and 532 shift workers from the European Prospective Investigation into Cancer and Nutrition-Netherlands (EPIC-NL) were used in these cross-sectional analyses. Time spent (hours/week) in different PA types (walking/cycling/exercise/chores) and intensities (moderate/vigorous) were calculated based on self-reported PA. Furthermore, sports were operationalised as: playing sports (no/yes), individual versus non-individual sports, and non-vigorous-intensity versus vigorous-intensity sports. PA levels were compared between shift workers and non-shift workers using Generalized Estimating Equations and logistic regression. Results Shift workers reported spending more time walking than non-shift workers (B=2.3 (95% CI 1.2 to 3.4)), but shift work was not associated with other PA types and any of the sports activities. Shift workers who worked 1–4 night shifts/month (B=2.4 (95% CI 0.6 to 4.3)) and ≥5 night shifts/month (B=3.7 (95% CI 1.8 to 5.6)) spent more time walking than non-shift workers. No exposure–response relationships were found between years of shift work and PA levels. Conclusions Shift workers spent more time walking than non-shift workers, but we observed no differences in other non-occupational PA levels. To better understand if and how PA plays a role in the negative health consequences of shift work, our findings need to be confirmed in future studies. PMID:27872151

Workers' Participation and the Distribution of Control as Perceived by Members of Ten German Companies.

Science.gov (United States)

Bartolke, Klaus; And Others

1982-01-01

A survey of 601 managers and workers in 10 German manufacturing companies studied the implications of workers' participation for the exercise of control. Statistical analysis of data on control over work environments, production organization, personnel, and finance indicated that, in more participative companies, distribution of control is more…

Mortality among retired fur workers. Dyers, dressers (tanners) and service workers

Energy Technology Data Exchange (ETDEWEB)

Sweeney, M.H.; Walrath, J.; Waxweiler, R.J.

1985-08-01

A retrospective cohort mortality study was conducted on 807 fur dyers, fur dressers (tanners), and fur service workers who were pensioned between 1952 and 1977 by the Fur, Leather and Machine Workers Union of New York City. Workplace exposures of fur workers varied with job category. Dyers were exposed to oxidative dyes used in commercial hair dyes; dressers and service workers were exposed to tanning chemicals. In a comparison with the New York City population, no significant increases in mortality were observed among the fur dyers. Among fur dressers, mortality from all malignant neoplasms and lung cancer was significantly elevated, as was mortality from cardiovascular disease among fur service workers. When examined by ethnic origin, the elevated SMR values and directly age-adjusted rate ratios suggested that foreign-born fur dressers and eastern European-born fur workers experienced the highest risks for lung and colorectal cancers, respectively. These data support previous findings of increased mortality from colorectal cancer in the foreign-born population of the United States and suggest a possible occupational etiology for the observed lung cancer excess.

Self-reported reasons for hand hygiene in 3 groups of health care workers.

Science.gov (United States)

McLaughlin, Anne Collins; Walsh, Fran

2012-09-01

The hands of health care workers continue to be the main vector for nosocomial infection in hospitals. The purpose of the current research was to capture the health beliefs and self-reported behaviors of US health care workers to better understand why workers avoid hand hygiene and what prompts them to wash. An online survey of health care workers assessed their reasons for washing their hands, reasons for not washing, and what cues prompted the decision to wash or not wash in a variety of locations. The findings were that hand hygiene could be cued by an external situation but tended to be motivated internally. Hand hygiene was avoided because of situational barriers. The reasons for performing hand hygiene can be situated in the internally motivated Theory of Planned Behavior; however, the reasons for not performing hand hygiene tend to be situational and affected by the environment. The results may be used to design programs, products, and systems that promote appropriate hand hygiene practices. Principles for design of these programs and products are provided. Copyright © 2012 Association for Professionals in Infection Control and Epidemiology, Inc. Published by Mosby, Inc. All rights reserved.

Returns to Tenure, Firm-Specific Human Capital and Worker Heterogeneity

DEFF Research Database (Denmark)

Bingley, Paul; Westergård-Nielsen, Niels Chr.

2003-01-01

Workers with longer job tenure are paid more, on average, than those with shorter tenure. This paper re-opens the debate about whether individual financial returns to tenure are due to firm-specific human capital accumulation or sorting according to unobserved individual productivity heterogeneity...... firms to distinguish between firm-specific human capital and worker heterogeneity. Although the proportion of tenure returns due to firm-specific human capital is smaller than that found in the US, it has increased from 10% in 1980 to 30% in 1998 in Denmark. This change coincides with decentralisation...

Decent Work in the Chinese Apparel Industry: Comparative Analysis of Blue-Collar and White-Collar Garment Workers

Directory of Open Access Journals (Sweden)

Caixia Chen

2017-08-01

Full Text Available Addressing labor issues in the apparel industry is significantly important due to customers’ increasing awareness of poor working conditions and growing labor crises in apparel production locations worldwide. Decent work is a key element to achieving fair and harmonious employment, but is not always evident in global apparel production networks. This study examines the working conditions in China’s garment manufacturing industry, which employs more than 10 million workers. A survey was administered to 313 blue-collar workers and 228 white-collar workers on issues related to decent work, including workers’ concerns, satisfaction levels and attitudes towards decent work. Regression analysis showed that workers’ attitudes are significantly related to age, education level, service length and monthly wage. Gap analysis revealed poor understanding of decent work and low satisfaction with primary indicators of decent work. However, results suggest that workers increasingly value soft factors and the overall work experience, not only financial benefits. Cluster analysis identified four clusters of workers. This study contributes to understanding garment worker perceptions of decent work and provides implications for the operationalization of decent work in China’s garment manufacturing industry.

Musculoskeletal problems among workers in a garment industry, at Tirupur, Tamil Nadu

Directory of Open Access Journals (Sweden)

Sreesupria Purushothaman Ravichandran

2016-09-01

Full Text Available Background: Every occupation has its own ill effects on health. Garment workers are denied of their basic rights and less importance is given to their health. Their health status also depends on their access to treatment and availability of healthcare facilities. Aims & Objectives: To estimate the prevalence, health seeking pattern and associated factors for musculoskeletal problems among garment workers and to assess the level of exposure of individual workers to upper limb musculoskeletal loads. Materials and methods: A cross sectional study was conducted among 380 workers in a garment industry, at Tirupur over a period of two months. Interview was conducted using a structured pretested questionnaire including Nordic Musculoskeletal Questionnaire and Numerical Pain Rating Scale. Level of exposure to musculoskeletal load was assessed using RULA tool. Statistical analysis was done using SPSS 19 version. Results: 77.6% of the workers had musculoskeletal problems. The most common sites affected were neck (32.1%, knee (28.7% and low back (26.6%. More than half of the workers experienced moderate pain in all body parts. 54.2% sought health care and 40% among them preferred government hospital. Only 8.7% workers had acceptable posture. Conclusion: Health problems among garment workers are one of the areas of public health concern in our country. Reducing the work strain and providing a supportive workplace environment will have a favorable impact on work productivity

Occupational Stress Among Home Healthcare Workers: Integrating Worker and Agency-Level Factors.

Science.gov (United States)

Zoeckler, Jeanette M

2018-02-01

Home healthcare work is physically and emotionally exhausting. In addition, home healthcare workers frequently work under precarious work arrangements for low wages and in poor work conditions. Little is known about how sources of job strain for home healthcare workers might be reduced. This research examines the occupational stressors among paid home care workers by analyzing home healthcare agency characteristics and individual home healthcare workers' experiences in upstate New York agencies (n = 9). The study augments existing theoretical models and describes new sources of stress arising from the nature of agency-based caregiving. Results feature the analysis of both agency executives' (n = 20) and home healthcare workers' narratives (n = 25) to make the agency's inner workings more transparent. Agency structures and culture are implicated in the lack of progress to address home care workers' health problems. Policy change should focus on compensation, healthier work conditions, and training requirements.

Electrodeposition of palladium and reduced graphene oxide nanocomposites on foam-nickel electrode for electrocatalytic hydrodechlorination of 4-chlorophenol

International Nuclear Information System (INIS)

Liu, Yong; Liu, Lan; Shan, Jun; Zhang, Jingdong

2015-01-01

Highlights: • Pd and reduced graphene oxide are deposited on foam-Ni via electrodeposition. • Pd particles supported on RGO possess large active surface area. • Pd/RGO/foam-Ni shows high electrocatalytic activity for dechlorination of 4-CP. • 100% 4-CP can be removed on Pd/RGO/foam-Ni under optimum ECH conditions. - Abstract: A high-performance palladium (Pd) and reduced graphene oxide (RGO) composite electrode was prepared on foam-nickel (foam-Ni) via two-step electrodeposition processes. The scanning electron microscopic (SEM) observation showed that the obtained Pd/RGO/foam-Ni composite electrode displayed a uniform and compact morphology. The X-ray diffraction (XRD) and X-ray photoelectron spectroscopic (XPS) analysis confirmed the successful deposition of Pd and RGO on nickel substrate. The cyclic voltammetric (CV) measurements indicated that the presence of RGO greatly enhanced the active surface area of Pd particles deposited on foam-Ni. The as-deposited Pd/RGO/foam-Ni electrode was applied to electrocatalytic hydrodechlorination (ECH) of 4-chlorophenol (4-CP). Various factors influencing the dechlorination of 4-CP such as dechlorination current, initial concentration of 4-CP, Na 2 SO 4 concentration and initial pH were systematically investigated. The thermodynamic analysis showed that the dechlorination reaction of 4-CP at different temperatures followed the first-order kinetics and the activation energy for 4-CP dechlorination on Pd/RGO/foam-Ni electrode was calculated to be 51.96 kJ mol −1 . Under the optimum conditions, the dechlorination efficiency of 4-CP could reach 100% after 60-min ECH treatment. Moreover, the prepared Pd/RGO/foam-Ni composite electrode showed good stability for recycling utilization in ECH of 4-CP

Banana production systems: identification of alternative systems for more sustainable production.

Science.gov (United States)

Bellamy, Angelina Sanderson

2013-04-01

Large-scale, monoculture production systems dependent on synthetic fertilizers and pesticides, increase yields, but are costly and have deleterious impacts on human health and the environment. This research investigates variations in banana production practices in Costa Rica, to identify alternative systems that combine high productivity and profitability, with reduced reliance on agrochemicals. Farm workers were observed during daily production activities; 39 banana producers and 8 extension workers/researchers were interviewed; and a review of field experiments conducted by the National Banana Corporation between 1997 and 2002 was made. Correspondence analysis showed that there is no structured variation in large-scale banana producers' practices, but two other banana production systems were identified: a small-scale organic system and a small-scale conventional coffee-banana intercropped system. Field-scale research may reveal ways that these practices can be scaled up to achieve a productive and profitable system producing high-quality export bananas with fewer or no pesticides.

75 FR 11920 - General Electric Lighting-Ravenna Lamp Plant, Lighting Division, Including On-Site Leased Workers...

Science.gov (United States)

2010-03-12

... to the production of high intensity discharge lamps. The review shows that on August 24, 2007, a...-Ravenna Lamp Plant, Lighting Division, Including On-Site Leased Workers from Devore Technologies, Ravenna..., 2009, applicable to workers of General Electric Lighting-Ravenna Lamp Plant, Lighting Division...

75 FR 77665 - Whirlpool Corporation, Including On-Site Leased Workers From Career Solutions TEC Staffing and...

Science.gov (United States)

2010-12-13

... DEPARTMENT OF LABOR Employment and Training Administration [TA-W-74,593] Whirlpool Corporation, Including On-Site Leased Workers From Career Solutions TEC Staffing and Andrews International, Fort Smith... subject firm. The workers are engaged in the production of refrigerators and trash compactors. The company...

Health Status of the Female Workers in the Garment Sector of Bangladesh

Directory of Open Access Journals (Sweden)

Shaheen AHMED

2014-06-01

Full Text Available Readymade Garment (RMG Sector in Bangladesh has been playing a vital role in creating employment opportunity for the rural marginal people for the last two decades. At present 5,100 garment factories are operating in this country and 3.6 million workers are working there in which more than 80 percent of them are female. From the beginning it is largely apparent that the health status of the female garment workers is not well enough to do their work properly. Keeping this in mind, the study was conducted to find out the health status of the female workers. In this study, 200 female workers of Bangladesh were interviewed to identify the major diseases they experienced. The study reveals that the majority of the female workers in the garment sector suffer from the diseases like problems in bones, abortion complexity, dermatitis, back pain, eye stain, pruritus, malnutrition, respiratory problems, hepatitis (Jandice, gastric pain, fatigue, fever, abdomen pain, common cold, and helminthiasis. The policy makers and other concern bodies should take necessary measures to ensure good health of the garment workers. It will help female workers to be more productive and their contribution to the country will be enhanced.

The ground stone assemblage of a metal workers community: An unexplored dimension of Iron Age copper production at Timna

Directory of Open Access Journals (Sweden)

Aaron Greener

2016-10-01

In the framework of the renewed excavations at several of the copper smelting sites at Timna, a pioneering study was conducted in which more than 1000 ground stone tools were identified and registered. These tools include, among others, grinding stones, pounders, anvils and mortars; most were manufactured of compacted sandstone and granite, exposed in several locations in the valley. In this paper we present a typology and quantitative analysis of the ground stone tools which were used by the metal workers, and offer an interpretation of how the various types of tools were employed as part of the copper production process. This provides new insights regarding the smelting process and the conditions needed for its successful outcome.

Degeneration of sperm reservoir and the loss of mating ability in worker ants

Science.gov (United States)

Gobin, Bruno; Ito, Fuminori; Billen, Johan; Peeters, Christian

2008-11-01

Workers never mate in the large majority of ants, and they have usually lost the spermatheca, an organ specialized for long-term storage of sperm. Such ‘non-sexual’ workers are restricted to laying unfertilized eggs that give rise to males, and they cannot compete with the queens for the production of female offspring. In sharp contrast, workers in 200 300 species from phylogenetically basal subfamilies can reproduce sexually (‘gamergates’) because they retain a functional spermatheca like the queens. Importantly, ‘non-sexual’ workers in closely related species have a vestigial spermatheca. In this study, we compared the reservoir epithelium of ‘sexual’ workers to that of congeneric queens and ‘non-sexual’ workers using 21 species of Amblyoponinae, Ponerinae and Ectatomminae. We show that a pronounced thickening of the epithelium near the opening of the sperm duct is strictly associated with sexual reproduction in both castes. This is unlike ‘non-sexual’ workers in which this epithelium is always very thin, with few organelles; but all other structures remain intact. We discuss this evolutionary degeneration of the spermatheca and how it relates to behavioural or physiological modifications linked to mating. Our results help understand the loss of sexual reproduction by ant workers, a critical step in the extreme specialization of their phenotype.

Determination of Phenols in Water Samples using a Supported ...

African Journals Online (AJOL)

The sample preparation method was tested for the determination of phenols in river water samples and landfill leachate. Concentrations of phenols in river water were found to be in the range 4.2 μg L–1 for 2-chlorophenol to 50 μg L–1 for 4-chlorophenol. In landfill leachate, 4-chlorophenol was detected at a concentration ...

Seroprevalence of brucellosis in workers of slaughter houses in the municipalities of Tolima (Colombia

Directory of Open Access Journals (Sweden)

Diego Fernando Morales Ortegón

2004-06-01

Full Text Available Human brucelosis is usually detected onpersonnel whom keep permanent closer cattle contact or frequently ingestion of inadequatecattle derivated processed products.Methods: A cross-sectional study was designedto determinate the seroprevalence of Brucellainfection in workers of slaughterhouses of theTolima region (Colombia. A group of 186workers were evaluated by using serological testlike rose bengal test, complement fixation testand Elisa.Results: An aproximated 4% prevalence ofBrucella antibodies were detected in the examinatedpopulation. Showy correlation betweenseropositive and hygienic work conditions werefounded.Conclusions: Slaugtherhouses workers have anelevated risk infection due to Unfavorable workhygienical conditions.

When healthcare workers get sick: exploring sickness absenteeism in British Columbia, Canada.

Science.gov (United States)

Gorman, Erin; Yu, Shicheng; Alamgir, Hasanat

2010-01-01

To determine the demographic and work characteristics of healthcare workers who were more likely to take sickness absences from work in British Columbia, Canada. Payroll data were analyzed for three health regions. Sickness absence rates were determined per person-year and then compared across demographic and work characteristics using multivariate Poisson regression models. The direct costs to the employer due to sickness absences were also estimated. Female, older, full-time workers, long-term care workers and those with a lower hourly wage were more likely to take sickness absences and had similar trends with respect to the costs due to sickness absence. For occupations, licensed practical nurses, care aides and facility support workers had higher rates of sickness absence. Registered nurses, and those workers paid high hourly wages were associated with highest sickness related costs. It is important to understand the demographic and work characteristics of those workers who are more likely to take sickness absences in order to make sure that they are not experiencing additional hazards at work or facing detrimental workplace conditions. Policy makers need to establish healthy, safe and in turn more productive workplaces. Further research is needed on how interventions can reduce sickness absence.

Mortality among retired fur workers. Dyers, dressers (tanners) and service workers.

Science.gov (United States)

Sweeney, M H; Walrath, J; Waxweiler, R J

1985-08-01

A retrospective cohort mortality study was conducted on 807 fur dyers, fur dressers (tanners), and fur service workers who were pensioned between 1952 and 1977 by the Fur, Leather and Machine Workers Union of New York City. Workplace exposures of fur workers varied with job category. Dyers were exposed to oxidative dyes used in commercial hair dyes; dressers and service workers were exposed to tanning chemicals. In a comparison with the New York City population, no significant increases in mortality were observed among the fur dyers. Among fur dressers, mortality from all malignant neoplasms [standardized mortality ratio (SMR) 151] and lung cancer (SMR 232) was significantly elevated, as was mortality from cardiovascular disease (SMR 126) among fur service workers. When examined by ethnic origin, the elevated SMR values and directly age-adjusted rate ratios suggested that foreign-born fur dressers and eastern European-born fur workers experienced the highest risks for lung and colorectal cancers, respectively. These data support previous findings of increased mortality from colorectal cancer in the foreign-born population of the United States and suggest a possible occupational etiology for the observed lung cancer excess.

Cancer risk among workers of a secondary aluminium smelter.

Science.gov (United States)

Maltseva, A; Serra, C; Kogevinas, M

2016-07-01

Cancer risk in secondary aluminium production is not well described. Workers in this industry are exposed to potentially carcinogenic agents from secondary smelters that reprocess aluminium scrap. To evaluate cancer risk in workers in a secondary aluminium plant in Spain. Retrospective cohort study of male workers employed at an aluminium secondary smelter (1960-92). Exposure histories and vital status through 2011 were obtained through personal interviews and hospital records, respectively. Standardized mortality (SMRs) and incidence ratios (SIRs) were calculated. The study group consisted of 98 workers. We found increased incidence and mortality from bladder cancer [SIR = 2.85, 95% confidence interval (CI) 1.23-5.62; SMR = 5.90, 95% CI 1.58-15.11]. Increased incidence was also observed for prostate cancer and all other cancers but neither were statistically significant. No increased risk was observed for lung cancer. Results of this study suggest that work at secondary aluminium smelters is associated with bladder cancer risk. Identification of occupational carcinogens in this industry is needed. © The Author 2016. Published by Oxford University Press on behalf of the Society of Occupational Medicine. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

Allergy to latex in health workers

Directory of Open Access Journals (Sweden)

Fajardo-Zapata, Álvaro L.

2015-01-01

Full Text Available Introduction: A common and growing problem in hospitals is hypersensitivity to rubber latex antigens, since many products, including gloves, are manufactured from this material, with the consequent possibility of producing allergy in persons who use them. Objective: To find out if health workers at a fourth level clinic in Bogotá, Colombia, are allergic to rubber latex, in relation to the use of gloves. Materials and methods: Descriptive, cross-sectional study of a non-probabilistic intentional-type sample in each one of four hospital units. A survey was applied to participants. Results: 16 of the 26 persons (61.5% with history of allergic processes manifested some kind of reaction when they had contact with latex gloves; the problem was more significant in the nursing personnel compared to physicians. Conclusions: The exposure to latex gloves may be generating the appearance of allergic occupational disease in health workers.

Risk of dust bronchopulmonary pathology development in workers employed in various economic brunches under impacts exerted by occupational risk factors: clinical and hygienic aspects

Directory of Open Access Journals (Sweden)

A.B. Bakirov

2017-09-01

Full Text Available We performed complex clinical and hygienic research on 234 workers suffering from occupational bronchitis; they were employed in petrochemical industry, mining, civil engineering, as well as in construction. Group of workers with occu-pational diseases comprised hose suffering from dust bronchitis and toxic-dust bronchitis. Workers employed in the exam-ined branches had to work under exposure to production aerosols with complex structure and they working conditions had 3.2–3.4 hazard degree. We showed that occupational factors exerted negative influence on workers' health as they caused occupational bronchitis development, grave complications, and frequent associated diseases evolvement. The paper dwells on the results of our research on lipid peroxidation products content in workers exposed to production aerosols. We detected increased activity of free radical oxidation caused by impacts exerted by production aerosols; here we revealed that growth in lipid peroxidation products depended on duration of work under hazardous conditions. We set a goal to detect correlation between polymorph gene types of xenobiotics transformation enzymes and occupational bronchitis evolvement via poly-merase chain reaction technique; to achieve this, we analyzed polymorphic locuses in a group of sick workers (131 people and healthy ones (156 people. We determined genetic markers which had protective significance in terms of occupational bronchitis evolvement risk. The research results prove that occupational bronchitis nature and peculiarities of its clinic pic-ture are determined both by occupational impacts and individual features of a worker' s body.

76 FR 51432 - Notice of Determinations Regarding Eligibility To Apply for Worker Adjustment Assistance and...

Science.gov (United States)

2011-08-18

... possess skills that are not easily transferable. 3. The competitive conditions within the workers... Products, Kessler Marketing Group, Youngstown, Ohio: April 30, 2010 TA-W-80,181; L'Oreal, USA Products...