The scoop on oilsands shovels : they're big and getting bigger

Energy Technology Data Exchange (ETDEWEB)

Budd, G.

2007-12-15

This article described some of the heavy machinery used for oilsands site preparation, removal of overburden and mining. Some forecasts indicate that production in the Canada's oilsands sector will reach 3 million barrels per day by 2015. Giant electric-powered cable shovels from P and H Mining Equipment Inc. scoop and lift approximately 100 tonnes per pass and weigh about 1,500 tonnes. Shovels that are used in the oilsands have been modified for local conditions, and have a lighter footprint because of the soft ground. Some units measure 68 feet in height, nearly that of a 7 storey building. Cable shovels and hydraulic shovels are the 2 kinds of heavy-duty shovels used in large site preparation work. Both have advantages and limitations. Cable shovels use winches to operate the boom and shovel and have a greater lift capacity than hydraulic shovels. Cable shovels have been in use for more than a century, and many have seen significant improvements over the years, including systems to indicate the weight of each scoop, or remote communication systems that operate on a real-time basis. Hydraulic shovels are more mobile than cable shovels and are diesel powered. In the oilsands sector, both cable and hydraulic shovels are superior to the bucket wheel systems originally used to scoop the ore. They are faster than cable shovels and have the ability to dig down with hydraulic force rather than relying on gravity. The 10-year, $1.2 billion contract that North American Construction Group has signed with Canadian Natural Resources Limited's Horizon project will carefully consider issues of cost and operational efficiency when removing 400 million cubic metres of overburden. The project will require a fleet of 35 330-tonne trucks, 2 large Hitachi hydraulic shovels and 2 massive electric-powered cable shovels from Bucyrus International Inc. This article emphasized that the right equipment and expertise can play a major role in landing important contracts. Companies

Increase of rotation angle of soil layers during plow operation

Science.gov (United States)

Vasilenko, VV; Afonichev, D. N.; Vasilenko, S. V.; Khakhulin, A. N.

2018-03-01

One of the advantages of plowing is the ability of the plow to hide the weed seeds deep into the soil. The depth of the embankment exceeds 10-12 cm, from there the weeds can not rise to the surface of the soil. They perish halfway. But for this, it is necessary to wrap the soil layers at an angle close to 180 °. Modern ploughs can not turn the layers of soil at an angle of more than 135 °, therefore the plow is required to be equipped with additional working elements. The aim of the study is to create an adaptation to the plow to expand the furrow before laying the next soil layer. In a wide furrow, the formation will completely tip, the previous layer will not interfere with it. The device is a set of vertical shields. Each shield is fixed behind the working body of the plow. It is installed with an angle of attack of 20-25 ° to move the previous layer to expand the furrow by 10-12 cm. The model and industrial samples of the plow have shown improved agrotechnical indicators. The average angle of the formation rotation was 177 °, the burial of plant residues in the soil increased from 61 to 99%. The field surface with blocks more than 5 cm decreased from 36.3 to 13.4%, the height of the ridges decreased from 7 to 4 cm. The force of soil pressure on the shield was measured by a strain gage. It is 130-330 N depending on the depth of processing and the speed of movement. The increase in power costs for the four-hull plow was 190-750 W. The coulters on the plow are unnecessary, and this saves energy more than its increase for shields.

Structural Bionic Design for Digging Shovel of Cassava Harvester Considering Soil Mechanics

Directory of Open Access Journals (Sweden)

Shihao Liu

2014-01-01

Full Text Available In order to improve the working performance of cassava harvester, structural bionic design for its digging shovel was conducted. Taking the oriental mole cricket's paws as bionic prototype, a new structural bionic design method for digging shovel was established, which considers the morphology-configuration-function coupling bionic. A comprehensive performance comparison method was proposed, which is used to select the bionic design schemes. The proposed bionic design method was used to improve digging shovel structure of a digging-pulling style cassava harvester, and nine bionic-type digging shovels were obtained with considering the impact of soil mechanics. After conducting mechanical properties comparative analysis for bionic-type digging shovels, the bionic design rules were summed up, and the optimal design scheme of digging shovel was obtained through combining the proposed comprehensive performance comparison method with Analytic Hierarchy Process (AHP. Studies have shown that bionic design method not only can improve the overall mechanical properties of digging shovel, but also can help to improve the harvesting effect of cassava harvester, which provides a new idea for crops harvesting machinery's structural optimization design.

A shovel with a perforated blade reduces energy expenditure required for digging wet clay.

Science.gov (United States)

Harivanam, Sridhar; Marklin, Richard W; Papanek, Paula E; Cariapa, Vikram

2010-08-01

A shovel with a blade perforated with small holes was tested to see whether a worker would use less whole-body energy to dig wet clay than with a shovel with an opaque blade. A perforated shovel is hypothesized to require less whole-body energy on the basis of adhesion theory; a smaller surface area would require less physical effort to dig and release soil from the blade. The study involved 13 workers from an electric utility who dug wet clay with two 1.5-m long-handled point shovels, which differed only in blade design (perforated and opaque). Oxygen consumption was measured with a portable system while each worker dug wet clay at a self-regulated pace for 10 min. There was no significant difference in number of scoops dug during the 10-min sessions, but workers dug 9.5% more weight of clay with the perforated shovel than with the conventional shovel (404 kg vs. 369 kg, respectively). Furthermore, stable oxygen uptake normalized to weight of participant and to the weight of clay dug revealed that participants expended 11.7% less relative energy per kilogram of clay dug with the perforated shovel. A point shovel with a perforated blade is recommended for digging and shoveling wet clay. However, the extra weight that workers chose to dig with the perforated shovel may increase the loading on the spine and may offset the metabolic advantages. Manual shoveling is a common task, and workers may experience less whole-body and muscle fatigue when using a perforated shovel.

Redesigning and Manufacturing of a Land Levelling Shovel by Assembly Structural Stress Analysis

Directory of Open Access Journals (Sweden)

Tahir Altinbalik

2014-02-01

Full Text Available The aim was to redesign and manufacture of a shovel for a pull-type land levelling machine, which, in its present condition, is used to get easily damaged even under low loads. Firstly, the maximum pulling load affecting the levelling shovel was experimentally determined. Then, stable-shovel system with the bolt connection was replaced with a bearing-shaft connection system. In this way, the new shovel has gained a capability of making oscillation motion so that it can operate on sloped grounds. CATIA program was used in the design studies. The shovel system was investigated by assembly structural stress analyses. This new construction enabled the system to operate 3 times more securely at maximum stress conditions without changing the levelling shovel material. Thus, it is managed to prevent any possible damages that might occur due to maximum loading conditions of the system. Besides, displacements that occur on the shovel decreased at the rate of 90%.

Productivity considerations for shovels and excavators

Energy Technology Data Exchange (ETDEWEB)

Fiscor, S.

2007-09-15

During Haulage and Loading 2007, the Engineering and Mining Journal organized an OEM round table discussion with the theme 'Reducing cycle times'. Seven panelists identified areas where they could improve cycle times for open-pit mining. Although the discussions focused mainly on haud trucks, two panelists discussed shovel productivity as it relates to cycle times. Topics ranged from truck-shovel pass matching to payload management. A clear message came through that all the minutes saved per cycle meant nothing if the mine did not have a properly trained operator. The article reports on the discussions. 4 figs.

Bioinspired design of a ridging shovel with anti-adhesive and drag reducing

Directory of Open Access Journals (Sweden)

Zhijun Zhang

2015-03-01

Full Text Available Learning from the microstructure of the convex (concave and ridging (triangle and arc-shaped shapes of fresh lotus leaves and shark skin, bionic ridging shovels was designed with the characteristics of adhesion and resistance reduction. Ten ridging shovel models were established, and the interaction process with the soil by ANSYS is discussed. Stress analysis results showed that the bionic ridging shovel was more obvious in visbreaking and in the resistance reduction effect. An indoor soil bin experiment with the bionic ridging shovel and the prototype ridging shovel was operated as follows: the ridging resistance of the three types of ridging shovel was tested under the condition of two soil moistures (18.61% and 20.9% and three different ridging speeds (0.68, 0.87, and 1.11 m/s. In this article, the structure, the mechanism, and their relationship to the functions are discussed. The results of this study will be useful in practical application in the field of agricultural machinery toward practical use and industrialization.

The genetics of shovel shape in maxillary central incisors in man.

Science.gov (United States)

Blanco, R; Chakraborty, R

1976-03-01

From dental casts of 94 parent-offspring and 127 full-sib pairs, sampled from two Chilean populations, shovelling indices are computed to measure the degree of shovelling of maxillary central incisors quantitatively. Genetic correlations are computed to determine the role of genetic factors in explaining the variation in this trait. Assuming only hereditary factors to be responsible for the transmission of shovel shape, 68% of total variability is ascribed to the additive effect of genes.

Redesigning and Manufacturing of a Land Levelling Shovel by Assembly Structural Stress Analysis

OpenAIRE

Tahir Altinbalik; Gürkan İrsel

2014-01-01

The aim was to redesign and manufacture of a shovel for a pull-type land levelling machine, which, in its present condition, is used to get easily damaged even under low loads. Firstly, the maximum pulling load affecting the levelling shovel was experimentally determined. Then, stable-shovel system with the bolt connection was replaced with a bearing-shaft connection system. In this way, the new shovel has gained a capability of making oscillation motion so that it can operate on sloped groun...

Influence of snow shovel shaft configuration on lumbosacral biomechanics during a load-lifting task.

Science.gov (United States)

Lewinson, Ryan T; Rouhi, Gholamreza; Robertson, D Gordon E

2014-03-01

Lower-back injury from snow shovelling may be related to excessive joint loading. Bent-shaft snow shovels are commonly available for purchase; however, their influence on lower back-joint loading is currently not known. Therefore, the purpose of this study was to compare L5/S1 extension angular impulses between a bent-shaft and a standard straight-shaft snow shovel. Eight healthy subjects participated in this study. Each completed a simulated snow-lifting task in a biomechanics laboratory with each shovel design. A standard motion analysis procedure was used to determine L5/S1 angular impulses during each trial, as well as peak L5/S1 extension moments and peak upper body flexion angle. Paired-samples t-tests (α = 0.05) were used to compare variables between shovel designs. Correlation was used to determine the relationship between peak flexion and peak moments. Results of this study show that the bent-shaft snow shovel reduced L5/S1 extension angular impulses by 16.5% (p = 0.022), decreased peak moments by 11.8% (p = 0.044), and peak flexion by 13.0% (p = 0.002) compared to the straight-shaft shovel. Peak L5/S1 extension moment magnitude was correlated with peak upper body flexion angle (r = 0.70). Based on these results, it is concluded that the bent-shaft snow shovel can likely reduce lower-back joint loading during snow shovelling, and thus may have a role in snow shovelling injury prevention. Copyright © 2013 Elsevier Ltd and The Ergonomics Society. All rights reserved.

Chisels in the italian Bronze Age: technological and typological aspects

Directory of Open Access Journals (Sweden)

Speciale, Claudia

2010-12-01

Full Text Available Bronze chisels are tools used “à percussion posée”; this means they need a minimum length and some functional parts (tang, body, blade; they could have a handle of perishable material and they were used with a hammer to work wood, bronze and other materials. Chisels can be classified following their functional parts; the first element is the shape (rod or socketed chisel; the second one is body section; the third one is tang section. Chronology and distribution of every type were identified to obtain a general view of this class of tools during the Italian Bronze Age.

Los cinceles de bronce son herramientas que se utilizan en percusión apoyada (à percussion posée, por consiguiente, necesitan una longitud mínima y algunas partes funcionales (empuñadura, cuerpo, hoja; podrían tener un mango de material perecedero. Se utilizan con un martillo en el labrado de la madera, del bronce y de otros materiales. Los cinceles se pueden clasificar de acuerdo con los siguientes elementos funcionales: el primero es la forma (cincel de varilla o de cubo; el segundo es la sección del cuerpo; el tercero es la sección de la empuñadura. La cronología y la distribución de cada tipo se identificaron para obtener una visión general de esta clase de instrumentos durante la Edad del Bronce en Italia.

Virtual prototype simulation of hydraulic shovel kinematics for spatial characterization in surface mining operations

Energy Technology Data Exchange (ETDEWEB)

S. Frimpong; Y. Li [University of Missouri-Rolla, Rolla, MO (United States). Department of Mining and Nuclear Engineering

2005-12-15

Hydraulic shovels are large-capacity equipment for excavating and loading dump trucks in constrained surface mining environments. Kinematics simulation of such equipment allows mine planning engineers to plan, design and control their spatial environments to achieve operating safety and efficiency. In this study, a hydraulic shovel was modelled as a mechanical manipulator with five degrees of freedom comprising the crawler, upper, boom, stick, bucket and bucket door components. The model was captured in a schematic diagram consisting of a six-bar linkage using the symbolic notation of Denavit and Hartenberg (Ho and Sriwattanathmma 1989). Homogeneous transformation matrices were used to capture the spatial configuration between adjacent links. The forward kinematics method was used to formulate the kinematics equations by attaching Cartesian coordinates to the schematic shovel diagram. Based on the kinematics model, a 3D virtual prototype of the hydraulic shovel was built in the Automatic Dynamic Analysis of Mechanical Systems (ADAMS) environment to simulate the motions of the hydraulic shovel with selected time steps. The simulator was validated using real-world data with animation and numerical analysis of the digging, swinging and dumping motions of the shovel machinery. The superimposed display of the deployment of the hydraulic shovel in three phases allows a detailed motion examination of the system. The numerical results of linear and angular displacements of the bucket tip and bucket door can be used to analyse the kinematics motion of the hydraulic shovel for its optimization. This simulator provides a solid foundation for further dynamics modelling and dynamic hydraulic shovel performance studies.

Smarter shovels dig and load more efficiently

Energy Technology Data Exchange (ETDEWEB)

Fiscor, S.

2009-03-15

Digital drive upgrades allow older shovels to power through the bank smoothly while improving safety and reliability. Flanders Electric is currently working on the third of five electric shovel upgrades which consists of Flandex Electric manufactured motors, Allen-Bradley PLCs and the Power Performance Digital Drive upgrade. With an open system, or open architecture, mine operators can service and maintain machines where a close system would limit the electricians to work with the OEMs exclusively. Typically, upgrades replace the old analog or an older digital drive with a new Power Performance Digital Drive upgrade. 1 fig., 2 photos.

Optimization of shovel-truck system for surface mining

Energy Technology Data Exchange (ETDEWEB)

Ercelebi, S.G.; Bascetin, A. [Istanbul Technical University, Istanbul (Turkey). Mining Engineering Department

2009-07-15

In surface mining operations, truck haulage is the largest item in the operating costs, constituting 50 to 60% of the total. In order to reduce this cost, it is necessary to allocate and dispatch the trucks efficiently. This paper describes shovel and truck operation models and optimization approaches for the allocation and dispatching of trucks under various operating conditions. Closed queuing network theory is employed for the allocation of trucks and linear programming for the purpose of truck dispatching to shovels. A case study was applied for the Orhaneli open Pit Coal Mine in Turkey. This approach would provide the capability of estimating system performance measures (mine throughput, mean number of trucks, mean waiting time, etc.) for planning purposes when the truck fleet is composed of identical trucks. A computational study is presented to show how choosing the optimum number of trucks and optimum dispatching policy affect the cost of moving material in a truck-shovel system.

Shovel-shaped incisors in the Black Sea region population of Turkey

Directory of Open Access Journals (Sweden)

Emin Murat Canger

2014-09-01

Conclusion: The incidence of shovel-shaped incisors was 10.1% in our study group; SSI affected lateral incisors more than central incisors; the number of women reflecting SSI was higher than men; and the majority of individuals had Type II (semi-shovel severity.

IMPROVING THE ORGANIZATION OF THE SHOVEL-TRUCK SYSTEMS IN OPEN-PIT COAL MINES

Directory of Open Access Journals (Sweden)

Mark KORYAGIN

2017-06-01

Full Text Available The aim of the study is to reduce idle times of mining trucks and shovels in an open-pit coal mine. A heuristic algorithm for making dispatching decisions in conditions of dynamic allocation of trucks is developed. Priority parameters for choosing the shovel after the end-of-truck unloading are introduced. Also, an algorithm for searching for the optimal priority parameters to satisfy the required efficiency criterion is developed. This algorithm is based on a simulation model of a shovel-truck system. The proposed approach is applicable in terms of the group of shovels with a common dump point in various open-pit coal mines. The importance of this work lies in the fact that the proposed model takes into account the random factors related with the duration of loading and dumping, truck movement, repair of shovels and haul trucks, as well as the duration of periods between repairs.

Influence of shovel-shaped incisors on the dental arch crowding in Mongolian females.

Science.gov (United States)

Hasegawa, Yuh; Terada, Kazuto; Kageyama, Ikuo; Tsukada, Shin-ichi; Uzuka, Satoshi; Nakahara, Rizako; Nakahara, Sen

2009-08-01

The aim of this study was to investigate the influences of shovel-shaped incisors on the dental arch crowding in the samples of modern young female adult Mongolians (belonging to the Khalkha-Mogol grouping) ranged between 18.5 and 25.0 years, with a mean age of 20.7 years. Materials in this study comprised of 33 dental casts. Plaster replicas of the A.S.U. system plaques were used to facilitate standardization in scoring and classify shoveling regarding both upper central and lateral incisors. Dimensions of the dental arch namely, overjet, overbite, arch depth, arch width and irregularity index were measured. The correlation between the shovel shape of the central incisor and the lateral incisor was highly significant. Significantly relations were found between the grades of shoveling and the mesiodistal diameters of upper first molars and lower incisors. Positive correlation was admitted between the shoveling and upper arch depth anterior, and upper arch depth. It may be considered that the grades of shoveling are indirectly related with upper and/or lower anterior crowding. Although crowding is looks like an expression of disharmony between teeth and alveolar arch, it may be caused by multiple etiologic factors interacted directly and/or indirectly.

Key performance indicators for electric mining shovels and oil sands diggability

Science.gov (United States)

Patnayak, Sibabrata

A shovel performance monitoring study was undertaken in two oil sands mines operated by Syncrude Canada Ltd. using performance data obtained from P&H 4100 TS and BOSS electric mining shovels. One year of shovel performance data along with geological, geotechnical, and climatic data were analyzed. The approach adopted was to use current and voltage data collected from hoist and crowd motors and to calculate the energy and/or power associated with digging. Analysis of performance data along with digital video records of operating shovels indicated that hoist and crowd motor voltages and currents can be used to identify the beginning and the end of individual dig cycles. A dig cycle identification algorithm was developed. Performance indicators such as dig cycle time, hoist motor energy and power, and crowd motor energy and power were determined. The shovel performance indicators provide important insight into how geology, equipment and operators affect the digging efficiency. The hoist motor power is a useful key performance indicator for assessing diggability. Hoist motor energy consumption per tonne of material excavated and the number of dig cycles required for loading a truck can be useful key performance indicators for assessing operator performance and productivity. Analysis of performance data along with operators team schedules showed that the performance of a shovel can be significantly influenced by the operator's digging technique while digging uniform material. Up to 25% variability in hoist motor power consumption and 50% variability in productivity was noted between different operators. Shovel type and dipper teeth configuration can also influence the power draw on electrical motors during digging. There is no common agreement existing on the influence of bitumen content on oil sands diggability. By comparing the hoist motor power consumption, it was found that the rich ore was more difficult to dig than the lean ore. Similarly, estuarine ore was more

Snow shovel-related injuries and medical emergencies treated in US EDs, 1990 to 2006.

Science.gov (United States)

Watson, Daniel S; Shields, Brenda J; Smith, Gary A

2011-01-01

Injuries and medical emergencies associated with snow shovel use are common in the United States. This is a retrospective analysis of data from the National Electronic Injury Surveillance System. This study analyzes the epidemiologic features of snow shovel-related injuries and medical emergencies treated in US emergency departments (EDs) from 1990 to 2006. An estimated 195 100 individuals (95% confidence interval, 140 400-249 800) were treated in US EDs for snow shovel-related incidents during the 17-year study period, averaging 11 500 individuals annually (SD, 5300). The average annual rate of snow shovel-related injuries and medical emergencies was 4.15 per 100 000 population. Approximately two thirds (67.5%) of these incidents occurred among males. Children younger than 18 years comprised 15.3% of the cases, whereas older adults (55 years and older) accounted for 21.8%. The most common diagnosis was soft tissue injury (54.7%). Injuries to the lower back accounted for 34.3% of the cases. The most common mechanism of injury/nature of medical emergency was acute musculoskeletal exertion (53.9%) followed by slips and falls (20.0%) and being struck by a snow shovel (15.0%). Cardiac-related ED visits accounted for 6.7% of the cases, including all of the 1647 deaths in the study. Patients required hospitalization in 5.8% of the cases. Most snow shovel-related incidents (95.6%) occurred in and around the home. This is the first study to comprehensively examine snow shovel-related injuries and medical emergencies in the United States using a nationally representative sample. There are an estimated 11 500 snow shovel-related injuries and medical emergencies treated annually in US EDs. Copyright © 2011 Elsevier Inc. All rights reserved.

Prevalence, association, and sexual dimorphism of Carabelli's molar and shovel incisor traits amongst Jordanian population.

Science.gov (United States)

Khraisat, A; Taha, Sahar T; Jung, R E; Hattar, S; Smadi, L; Al-Omari, I K; Jarbawi, M

2007-09-01

The correlation between dental morphological traits can be used as an indicator to show major ethnic differences. Therefore, this study investigated the prevalence of Carabelli's molar and shovel incisor traits and tested their association and sexual dimorphism in Jordanian population. Three hundred subjects of school children at their 10th grade and of 15.5-year as an average age were involved. Alginate impressions for the maxillary arch were taken, poured, and casts were then trimmed. The selected accurate casts were of 132 male- and 155 female-students. The examined morphologic traits were Carabelli's trait on the maxillary first and second molars and shovel-shaped incisors. The relationship between different traits was investigated by Nonparametric Correlation analysis and Independent Sample t test was used to test sexual dimorphism in trait expression. The prevalence of Carabelli's trait in maxillary first molar and shovel trait in maxillary central incisor was relatively high (65.0 % and 53.0 %, respectively). The prevalence of Carabelli's trait on maxillary second molars was 3.8 %. Nonparametric Correlations revealed a strongest positive correlation between Carabelli's trait on maxillary first molar and shovel trait in males (P = 0.005). Significant sexual dimorphism was only found in the prevalence of Carabelli's trait on maxillary first molar (P = 0.013) and shovel trait (P = 0.038). The Jordanian Population had comparatively high prevalence of Carabelli's molar and shovel incisor traits. There was a positive association between Carabelli's trait on maxillary first molar and shovel trait in males. Sexual dimorphism was evident in Carabelli's trait on maxillary first molar and shovel trait.

Does Avalanche Shovel Shape Affect Excavation Time: A Pilot Study

Directory of Open Access Journals (Sweden)

Kurt Schindelwig

2017-05-01

Full Text Available In Europe and North America, approximately 150 fatalities occur as a result of avalanches every year. However, it is unclear whether certain shovel shapes are more effective than others in snow removal during avalanche victim recovery. The objective was to determine the performance parameters with a developed standardized test using different shovel shapes and to determine sex-specific differences. Hence, several parameters were determined for clearing the snow from a snow filled box (15 men, 14 women. A flat (F and a deep (D shovel blade with the shaft connected straight (S or in clearing mode (C were used for the investigation of the shovel shapes FS, DC and the subsequent use of DC&DS. Mean snow mass shifted per unit time increased significantly from 1.50 kg/s with FS to 1.71 kg/s (14% with DS and further to 1.79 kg/s (4% with DC&DS for all participants. Snow mass shifted per unit time was 44% higher (p < 0.05 for men than for women. In excavation operations, the sex-specific physical performance should be taken into account. The results were limited to barely binding snow, because only with this snow did the tests show a high reliability.

Device for measuring ore radioactivity on a hauling winch such as a shovel dredger

International Nuclear Information System (INIS)

Rouillon, C.

1990-01-01

The device includes a rod articulated at the upper end, on the shovel dredger with a pendular motion in a vertical plane. At the lower end is fixed a radiation detector with a determined solid angle coverage. The rod and the shovel can be placed in a reproducible way in a mutual position such as the ore in the shovel fill a substantial part of the solid angle of the detector [fr

Underwater hydraulic shock shovel control system

Science.gov (United States)

Liu, He-Ping; Luo, A.-Ni; Xiao, Hai-Yan

2008-06-01

The control system determines the effectiveness of an underwater hydraulic shock shovel. This paper begins by analyzing the working principles of these shovels and explains the importance of their control systems. A new type of control system’s mathematical model was built and analyzed according to those principles. Since the initial control system’s response time could not fulfill the design requirements, a PID controller was added to the control system. System response time was still slower than required, so a neural network was added to nonlinearly regulate the proportional element, integral element and derivative element coefficients of the PID controller. After these improvements to the control system, system parameters fulfilled the design requirements. The working performance of electrically-controlled parts such as the rapidly moving high speed switch valve is largely determined by the control system. Normal control methods generally can’t satisfy a shovel’s requirements, so advanced and normal control methods were combined to improve the control system, bringing good results.

Energy expenditure and clearing snow: a comparison of shovel and snow pusher.

Science.gov (United States)

Smolander, J; Louhevaara, V; Ahonen, E; Polari, J; Klen, T

1995-04-01

In order to assess the energy demands of manual clearing of snow, nine men did snow clearing work for 15 min with a shovel and a snow pusher. The depth of the snowcover was 400-600 mm representing a very heavy snowfall. Heart rate (HR), oxygen consumption (VO2), pulmonary ventilation (VE), respiratory exchange ratio (R), and rating of perceived exertion (RPE) were determined during the work tasks. HR, VE, R, and RPE were not significantly different between the shovel and snow pusher. HR averaged (+/- SD) 141 +/- 20 b min-1 with the shovel, and 142 +/- 19 beats.min-1 with the snow pusher. VO2 was 2.1 +/- 0.41.min-1 (63 +/- 12%VO2 max) in shovelling and 2.6 +/- 0.51.min-1 (75 +/- 14%VO2max) in snow pushing (p < 0.001). In conclusion manual clearing of snow in conditions representing heavy snowfalls was found to be strenuous physical work, not suitable for persons with cardiac risk factors, but which may serve as a mode of physical training in healthy adults.

A common variation in EDAR is a genetic determinant of shovel-shaped incisors.

Science.gov (United States)

Kimura, Ryosuke; Yamaguchi, Tetsutaro; Takeda, Mayako; Kondo, Osamu; Toma, Takashi; Haneji, Kuniaki; Hanihara, Tsunehiko; Matsukusa, Hirotaka; Kawamura, Shoji; Maki, Koutaro; Osawa, Motoki; Ishida, Hajime; Oota, Hiroki

2009-10-01

Shovel shape of upper incisors is a common characteristic in Asian and Native American populations but is rare or absent in African and European populations. Like other common dental traits, genetic polymorphisms involved in the tooth shoveling have not yet been clarified. In ectodysplasin A receptor (EDAR), where dysfunctional mutations cause hypohidrotic ectodermal dysplasia, there is a nonsynonymous-derived variant, 1540C (rs3827760), that has a geographic distribution similar to that of the tooth shoveling. This allele has been recently reported to be associated with Asian-specific hair thickness. We aimed to clarify whether EDAR 1540C is also associated with dental morphology. For this purpose, we measured crown diameters and tooth-shoveling grades and analyzed the correlations between the dental traits and EDAR genotypes in two Japanese populations, inhabitants around Tokyo and in Sakishima Islands. The number of EDAR 1540C alleles in an individual was strongly correlated with the tooth-shoveling grade (p = 7.7 x 10(-10)). The effect of the allele was additive and explained 18.9% of the total variance in the shoveling grade, which corresponds to about one-fourth of the heritability of the trait reported previously. For data reduction of individual-level metric data, we applied a principal-component analysis, which yielded PC1-4, corresponding to four patterns of tooth size; this result implies that multiple factors are involved in dental morphology. The 1540C allele also significantly affected PC1 (p = 4.9 x 10(-3)), which denotes overall tooth size, and PC2 (p = 2.6 x 10(-3)), which denotes the ratio of mesiodistal diameter to buccolingual diameter.

A Study of Digging Productivity of an Electric Rope Shovel for Different Operators

Directory of Open Access Journals (Sweden)

Mohammad Babaei Khorzoughi

2016-05-01

Full Text Available A performance monitoring study of an electric rope shovel operating in an open pit coal mine was conducted. As the mining industry moves toward higher productivity, profitability and predictability, the need for more reliable, productive and efficient mining shovels increases. Consequently, it is critical to study the productivity of these machines and to understand the effect of different operational parameters on that. In this paper a clustering analysis is performed to classify shovel digging effort and behaviour based on digging energy, dig time and payload per pass. Then the influence of the operator on the digging efficiency and productivity of the machine is analyzed with a focus on operator technique during digging. A statistical analysis is conducted on different cycle time components (dig time, swing time, return time for different operators. In addition to time components, swing and return angles as well as loading rate and mucking rate are observed and analyzed. The results of this study help to understand the effect of different operators on the digging productivity of the shovel and then to set the best operator practice.

Optimising Shovel-Truck Fuel Consumption using Stochastic ...

African Journals Online (AJOL)

Michael

2017-12-02

Dec 2, 2017 ... J. Bansah. 1University of Mines and Technology, P. O. Box 237, Tarkwa, Ghana. 2Missouri S&T .... of dump trucks which could be mixed fleets or same fleets. .... another portraying the reality of trucks moving from a shovel to a ...

Investigation into the Effects of Textural Properties on Cuttability Performance of a Chisel Tool

Science.gov (United States)

Tumac, Deniz; Copur, Hanifi; Balci, Cemal; Er, Selman; Avunduk, Emre

2018-04-01

The main objective of this study is to investigate the effect of textural properties of stones on cutting performance of a standard chisel tool. Therewithal, the relationships between textural properties and cutting performance parameters and physical and mechanical properties were statistically analyzed. For this purpose, physical and mechanical property tests and mineralogical and petrographic analyses were carried out on eighteen natural stone samples, which can be grouped into three fundamentally different geological origins, i.e., metamorphic, igneous, and sedimentary. Then, texture coefficient analyses were performed on the samples. To determine the cuttability of the stones; the samples were cut with a portable linear cutting machine using a standard chisel tool at different depths of cut in unrelieved (non-interactive) cutting mode. The average and maximum forces (normal and cutting) and specific energy were measured, and the obtained values were correlated with texture coefficient, packing weighting, and grain size. With reference to the relation between depth of cut and cutting performance of the chisel tool for three types of natural stone groups, specific energy decreases with increasing depth of cut, and cutting forces increase in proportion to the depth of cut. The same is observed for the relationship between packing weighting and both of specific energy and cutter forces. On the other hand, specific energy and the forces decrease while grain size increases. Based on the findings of the present study, texture coefficient has strong correlation with specific energy. Generally, the lower depth of cut values in cutting tests shows higher and more reliable correlations with texture coefficient than the increased depth of cut. The results of cutting tests show also that, at a lower depth of cut (less than 1.5 mm), even stronger correlations can be observed between texture coefficient and cutting performance. Experimental studies indicate that cutting

Old shovels with digital control technology retrofits give new units a run for their money

Energy Technology Data Exchange (ETDEWEB)

Duskey, M.R. [Avtron Manufacturing Inc., Cleveland, OH (United States)

2006-04-15

New digital drive control systems can be retrofitted to shovels and draglines to maximize their performance and keep them running smoothly and reliably. Case histories of successful retrofits are reported. The static drives on a Marion 310 DC drive shovel operating in British Columbia were replaced with Avtron Firing Modules to improve machine availability. Three old Bucyrus 295 M-G set-controlled shovels operated by mines in North Dakota and Labrador which were experiencing excessive downtime were replaced with an Avtron ADD-32DMG field regulator. 2 figs.

Optimising Shovel-Truck Fuel Consumption using Stochastic ...

African Journals Online (AJOL)

Optimising the fuel consumption and truck waiting time can result in significant fuel savings. The paper demonstrates that stochastic simulation is an effective tool for optimising the utilisation of fossil-based fuels in mining and related industries. Keywords: Stochastic, Simulation Modelling, Mining, Optimisation, Shovel-Truck ...

Logistic analysis of shovel and Carabelli's tooth traits in a Caucasoid population.

Science.gov (United States)

Hsu, J W; Tsai, P; Liu, K; Ferguson, D

1997-09-19

Caucasoid populations differ from Mongoloids by having a high prevalence of Carabelli's trait and a low prevalence of shovel trait. This study was conducted to investigate the association between the shovel and the Carabelli's traits in a Caucasoid population. The research design sought a Caucasoid population at Milwaukee of Wisconsin in United States. The Caucasoid group selected for study was the European descendant. The effects of sex and age on Carabelli's trait were controlled in this investigation, as was the association between tooth size and Carabelli's trait. Results show that males were more likely to have Carabelli's trait expressed on teeth than females. The buccolingual diameter of Carabelli's trait teeth was larger than that of teeth without the trait. After adjusting for sex, age, and tooth size, the existence of the shovel trait decreased the likelihood of having Carabelli's trait which shows an significant effect.

Turbine shovels - research from the viewpoint of a safe work at nominal and increased individual power of turbo-generator sets

International Nuclear Information System (INIS)

Kachurkov, Gjorgji

1995-01-01

The secure work of the shovel devices is an important condition for a long and safe work. The steam turbine shovels are the most important and expensive elements. The damages of this elements can be very dangerous for the equipment as well as for the people. A long and expensive break of the work could be needed to repair them. All the shovels work in difficult conditions, but the first and the last stages work in the most difficult conditions. The working shovels of the first stages are influenced by a high parameter steam and during the partial bringing up of the steam the shovel load changes several times for every turbine turn from maximum to zero. The working shovels of the last stages are exposed to bending forces caused by the steam flow, as well as to strong centrifugal forces and to erosion effect as a result of a higher humidity and speed. The erosion of the shovel inlet edge can bring both pores and cracks appearance as a result of tension concentrations in the relatively thin edges. (author).7 figs., 1 ill

Ethnic dental analysis of shovel and Carabelli's traits in a Chinese population.

Science.gov (United States)

Hsu, J W; Tsai, P L; Hsiao, T H; Chang, H P; Lin, L M; Liu, K M; Yu, H S; Ferguson, D

1999-03-01

Chinese populations differ from Caucasoids by having a high prevalence of shovel trait and a low prevalence of Carabelli's trait. This study was conducted to investigate the association between the shovel and the Carabelli's traits in a Chinese population. The research design investigated a Chinese population that resides in southern Taiwan. The ancestors of this Chinese population migrated to Taiwan from mainland China, mainly from Fukien and Kwangtung. The effects of sex and age on Carabelli's trait were controlled in this investigation, as was the association between tooth size and Carabelli's trait. Results show that males were more likely to have Carabelli's trait expressed on teeth than females. The buccolingual diameter of Carabelli's trait teeth was larger than that of teeth without the trait. After controlling for sex, age, and tooth size, the existence of the shovel trait increased the likelihood of having Carabelli's trait by a factor of five and a half, which is a significant effect.

Mechanical-plowing-based high-speed patterning on hard material via advanced-control and ultrasonic probe vibration

Energy Technology Data Exchange (ETDEWEB)

Wang, Zhihua; Zou, Qingze, E-mail: qzzou@rci.rutgers.edu [Mechanical and Aerospace Engineering Department, Rutgers, the State University of New Jersey, Piscataway, New Jersey 08854 (United States); Tan, Jun; Jiang, Wei [Electrical and Computer Engineering Department, Rutgers, the State University of New Jersey, Piscataway, New Jersey 08854 (United States)

2013-11-15

In this paper, we present a high-speed direct pattern fabrication on hard materials (e.g., a tungsten-coated quartz substrate) via mechanical plowing. Compared to other probe-based nanolithography techniques based on chemical- and/or physical-reactions (e.g., the Dip-pen technique), mechanical plowing is meritorious for its low cost, ease of process control, and capability of working with a wide variety of materials beyond conductive and/or soft materials. However, direct patterning on hard material faces two daunting challenges. First, the patterning throughput is ultimately hindered by the “writing” (plowing) speed, which, in turn, is limited by the adverse effects that can be excited/induced during high-speed, and/or large-range plowing, including the vibrational dynamics of the actuation system (the piezoelectric actuator, the cantilever, and the mechanical fixture connecting the cantilever to the actuator), the dynamic cross-axis coupling between different axes of motion, and the hysteresis and the drift effects related to the piezoelectric actuators. Secondly, it is very challenging to directly pattern on ultra-hard materials via plowing. Even with a diamond probe, the line depth of the pattern via continuous plowing on ultra-hard materials such as tungsten, is still rather small (<0.5 nm), particularly when the “writing” speed becomes high. To overcome these two challenges, we propose to utilize a novel iterative learning control technique to achieve precision tracking of the desired pattern during high-speed, large-range plowing, and introduce ultrasonic vibration of the probe in the normal (vertical) direction during the plowing process to enable direct patterning on ultra hard materials. The proposed approach was implemented to directly fabricate patterns on a mask with tungsten coating and quartz substrate. The experimental results demonstrated that a large-size pattern of four grooves (20 μm in length with 300 nm spacing between lines) can be

[Schemes for implanting shovel pumps for assisted circulation].

Science.gov (United States)

Shumakov, V I; Tolpekin, V E; Melemuka, I V; Khaustov, A I; Eremin, V N; Degtiarev, V G; Romanov, O V

1992-01-01

The authors propose a design of an axial shovel pump for extracorporeal circulation. They show how to introduce it into various cardiovascular segments and make a comparative assessment of its efficacy in relation to the type and severity of heart failure, surgical access, and treatment policy.

Optimised dipper fine tunes shovel performance

Energy Technology Data Exchange (ETDEWEB)

Fiscor, S.

2005-06-01

Joint efforts between mine operators, OEMs, and researchers yields unexpected benefits from dippers for shovels for coal, oil, or hardrock mining that can now be tailored to meet site-specific conditions. The article outlines a process being developed by CRCMining and P & H MIning Equipment to optimise the dipper that involves rapid prototyping and scale modelling of the dipper and the mine conditions. Scale models have been successfully field tested. 2 photos.

[Effects of deep plowing time during the fallow period on water storage-consumption characteristics and wheat yield in dry-land soil.

Science.gov (United States)

Dang, Jian You; Pei, Xue Xia; Zhang, Ding Yi; Wang, Jiao Ai; Zhang, Jing; Wu, Xue Ping

2016-09-01

Through a three-year field trail, effects of deep plowing time during the fallow period on water storage of 0-200 cm soil before sowing, water consumption of growth period, and growth and development of wheat were investigated. Results demonstrated that soil water storage (SWS) of the fallow period was influenced by deep plowing time, precipitation, and rainfall distribution. With postponing the time of deep plowing in the fallow period, SWS was increased firstly, and then decreased. SWS with deep plowing in early or middle of August was 23.9-45.8 mm more than that with deep plowing in mid-July. It would benefit SWS when more precipitation occurred in the fallow period or more rainfall was distributed in August and September. Deep plowing at a proper time could facilitate SWS, N and P absorption of wheat, and the number of stems before winter and the spike number. The yield of wheat with deep plowing in early or middle August was 3.67%-18.2% higher than that with deep plowing in mid-July, and it was positively correlated with water storage of 0-200 cm soil during the fallow period and SWS of each soil layer during the wheat growth period. However, this correlation coefficient would be weakened by adequate rainfall in spring, the critical growing period for wheat. The time of deep plowing mainly affected the water consumption at soil layer of 60-140 cm during wheat growth. Under current farming conditions of south Shanxi, the increased grain yield of wheat could be achieved by combining the measures of high wheat stubble and wheat straw covering for holding soil water and deep plowing between the Beginning of Autumn (August 6th) and the Limit of Heat (August 21st) for promoting soil water penetration characteristics to improve the number of stems before winter and spike.

The hybrid assisted limb (HAL) for Care Support, a motion assisting robot providing exoskeletal lumbar support, can potentially reduce lumbar load in repetitive snow-shoveling movements.

Science.gov (United States)

Miura, Kousei; Kadone, Hideki; Koda, Masao; Abe, Tetsuya; Endo, Hirooki; Murakami, Hideki; Doita, Minoru; Kumagai, Hiroshi; Nagashima, Katsuya; Fujii, Kengo; Noguchi, Hiroshi; Funayama, Toru; Kawamoto, Hiroaki; Sankai, Yoshiyuki; Yamazaki, Masashi

2018-03-01

An excessive lumbar load with snow-shoveling is a serious problem in snowfall areas. Various exoskeletal robots have been developed to reduce lumbar load in lifting work. However, few studies have reported the attempt of snow-shoveling work using exoskeletal robots. The purpose of the present study was to test the hypothesis that the HAL for Care Support robot would reduce lumbar load in repetitive snow-shoveling movements. Nine healthy male volunteers performed repetitive snow-shoveling movements outdoors in a snowfall area for as long as possible until they were fatigued. The snow-shoveling trial was performed under two conditions: with and without HAL for Care Support. Outcome measures were defined as the lumbar load assessed by the VAS of lumbar fatigue after the snow-shoveling trial and the snow-shoveling performance, including the number of scoops, and snow shoveling time and distance. The mean of VAS of lumbar fatigue, the number of scoops, and snow-shoveling time and distance without HAL for Care Support were 75.4 mm, 50.3, 145 s, and 9.6 m, while with HAL for Care Support were 39.8 mm, 144, 366 s, and 35.4 m. The reduction of lumbar fatigue and improvement of snow-shoveling performance using HAL for Care Support were statistically significant. There was no adverse event during snow-shoveling with HAL for Care Support. In conclusion, the HAL for Care Support can reduce lumbar load in repetitive snow-shoveling movements. Copyright © 2017 Elsevier Ltd. All rights reserved.

Truck shovel users group

Energy Technology Data Exchange (ETDEWEB)

Thomas, J. [Surface Mining Association for Research and Technology, AB (Canada)

2008-07-01

The Truck Shovel Users Group (TSUG) was developed as part of the Surface Mining Association for Research and Technology (SMART), an association of companies that meet to coordinate technology developments for the mining industry. The TSUG meet regularly to discuss equipment upgrades, maintenance planning systems, and repair techniques. The group strives to maximize the value of its assets through increased safety, equipment performance and productivity. This presentation provided administrative details about the TSUG including contact details and admission costs. It was concluded that members of the group must be employed by companies that use heavy mining equipment, and must also be willing to host meetings, make presentations, and support the common goals of the group. tabs., figs.

Manipulator vehicles and loading shovels

International Nuclear Information System (INIS)

Brudermueller, G.; Krueger, W.

1992-01-01

Kerntechnische Hilfsdienst GmbH (KHG) is an institution jointly founded by electricity utilities, fuel cycle industries, and national research centers to provide specialist equipment for removing the consequences of accidents inside plants and recognizing damage in the immediate vicinity of such plants, maintain such equipment in an operational condition, and provide personnel instructed in work of this kind. The specialized technical equipment developed includes carriages, carrier vehicles for manipulators, grabs, TV cameras or measuring gear. In addition to manipulator vehicles, especially loading shovels are used. Radio-controlled vehicles are used where cable operation is either not reliable enough or has failed. (orig.) [de

Characteristics of the Papua New Guinean dentition. I Shovel-shaped incisors and canines associated with lingual tubercles.

Science.gov (United States)

Doran, G A

1977-10-01

The prevalence of shovel-shaped and lingual tubercles in maxillary incisors and canines in four groups of people in Papua New Guinea is reported. The shovel shape was not common among the people of Highland New Guinea but its presence in Papuans was comparable with that in Mongoloid races.

Shovel Operator. Open Pit Mining Job Training Series.

Science.gov (United States)

Hartley, Larry

This training outline for shovel operators, one in a series of eight outlines, is designed primarily for company training foremen or supervisors and for trainers to use as an industry-wide guideline for heavy equipment operator training in open pit mining in British Columbia. Intended as a guide for preparation of lesson plans both for classroom…

Multibody Dynamic Stress Simulation of Rigid-Flexible Shovel Crawler Shoes

Directory of Open Access Journals (Sweden)

Samuel Frimpong

2016-06-01

Full Text Available Electric shovels are used in surface mining operations to achieve economic production capacities. The capital investments and operating costs associated with the shovels deployed in the Athabasca oil sands formation are high due to the abrasive conditions. The shovel crawler shoes interact with sharp and abrasive sand particles, and, thus, are subjected to high transient dynamic stresses. These high stresses cause wear and tear leading to crack initiation, propagation and premature fatigue failure. The objective of this paper is to develop a model to characterize the crawler stresses and deformation for the P&H 4100C BOSS during propel and loading using rigid-flexible multi-body dynamic theory. A 3-D virtual prototype model of the rigid-flexible crawler track assembly and its interactions with oil sand formation is simulated to capture the model dynamics within multibody dynamics software MSC ADAMS. The modal and stress shapes and modal loads due to machine weight for each flexible crawler shoes are generated from finite element analysis (FEA. The modal coordinates from the simulation are combined with mode and stress shapes using modal superposition method to calculate real-time stresses and deformation of flexible crawler shoes. The results show a maximum von Mises stress value of 170 MPa occurring in the driving crawler shoe during the propel motion. This study provides a foundation for the subsequent fatigue life analysis of crawler shoes for extending crawler service life.

Experimental tests on winter cereal: Sod seeding compared to minimum tillage and traditional plowing

Directory of Open Access Journals (Sweden)

Antoniotto Guidobono Cavalchini

2013-09-01

Full Text Available Compared to traditional plowing and minimum tillage, the sod seeding technique has been tested in order to evaluate the differences in energy consumption, labor and machinery requirement and CO2 emission reduction. The experiments were conducted on winter cereal seeding in a Po valley farm in October 2011. The tests were carried out as follows: wheat variety seeding, over corn and alfalfa crops, in large plots with three repetitions for each thesis. They included: sod seeding anticipated by round up weeding in the case of the plots over alfalfa; traditional plowing at 35 cm followed by rotary tillage and combined seeding (seeder plus rotary tiller; minimum tillage based on ripping at the same depth (35 cm and combined seeder ( seeder plus rotary tiller. The following farm operations - fertilizer, and other agrochemical distributionshave been the same in all the considered theses. The results, statistically significant (P<0.001 in terms of yields, highlighted slight differences: the best data in the case of the traditional plowing both in the case of wheat crop over corn and alfalfa (84.43 and 6.75 t/ha; slightly lower yields for the sod seeding (6.23 and 79.9 t/ha for corn and alfalfa respectively; lower in the case of minimum tillage (5.87; 79.77 t/ha in the two situations. Huge differences in energy and oil consumption have been recorded: in the case of succession to corn 61.47; 35.31; 4.27 kg oil/ha respectively for, traditional plowing, minimum tillage and sod seeding; in the case of alfalfa 61.2; 50.96; 5.14 kg oil/ha respectively for traditional plowing, minimum tillage and sod seeding. The innovative technique, highlighted huge energy saving with an oil consumption equal to 92% and 89% (P<0.001 of what happens in traditional plowing and minimum tillage. Large differences concern labor and machine productivity. These parameters together with oil consumption and machine size [power (kW and weight (t] lead to even greater differences in

Analysis of cesium-137 vertical distribution in the profile of plowed chernozems at different schemes of their assaying

International Nuclear Information System (INIS)

Paramonova, T.A.; Komissarova, O.L.; Belyaev, V.R.; Ivanov, M.M.

2016-01-01

In 2011-2015 the assessment of profile cesium-137 distribution in agrocenosis of chernozem zone on the territory of the Plavsk radioactive spot in Tula region formed after the Chernobyl accident has been carried out. It is shown that up until now non-uniformity of cesium-137 vertical distribution over the plowed chernozems profile may be occurred, it should be taken into account at radioecological survey of post-Chernobyl landscapes. For correct evaluation of radioecological state of plowed soils their systematic monitoring on the base of preliminary analysis of cesium-137 distribution and also with the account of agrotechnical peculiarities of various crops cultivation is recommended. On the Plavsk radioactive spot territory the most adequate assessments of cesium-137 stores in plowed chernozems one can obtain on the base of assaying the upper 30-cm soil depth, including not only current topsoil, but also old-arable horizon formed by deep rehabilitation plowing [ru

Ethnic Association of Cusp of Carabelli Trait and Shoveling Trait in an Indian Population

Science.gov (United States)

Manju, M; Praveen, R; Umesh, W

2016-01-01

Introduction Variations in the structure of teeth have always been of great interest to the dentist from the scientific as well as practical point of view. Additionally, ever since decades inter trait relationships have been a useful means to categorize populations to which an individual belongs. Aim To determine the association between Cusp of Carabelli and Shoveling Trait in a selected Indian population native of Bangalore city, Karnataka, India. Materials and Methods A cross-sectional study was carried out in 1885 children aged between 7-10 years. Casts of the study subjects were made to study the presence of Cusp of Carabelli of right maxillary permanent molar and shoveling trait of right maxillary permanent central incisor using the Dahlberg’s classification and Hrdliucka’s classification respectively. Linear regression was used to assess the association of cusp of carabelli trait with the tooth dimensions and logistic regression was used to evaluate the association of the carabelli trait with gender and presence/absence of shoveling. Results A 40.5% of subjects had Cusp of Carabelli on first molar and 68.2% had shoveling on upper central incisor. The study revealed positive association between the two traits studied in the population. A significant difference was also found with presence of Cusp of Carabelli and the buccolingual tooth dimension of the maxillary molar (pshoveling trait in the present study population, and this will be valuable in the determination of ethnic origin of an individual. PMID:27135008

A case of death due to rescue action by a power shovel after being buried alive.

Science.gov (United States)

Watanabe-Suzuki, K; Nozawa, H; Ishii, A; Seno, H; Suzuki, O

2001-12-01

We report a rare case of death due to rescue using a power shovel. A 41-year-old female was accidentally buried alive by a landslide of the earth and sand upon working at a construction site. One of her colleagues started to save her using a power shovel. However, she was dug out dead at the spot about 10 min after the accident with marked head and face injuries. The autopsy disclosed that there was extensive laceration across the face and head with marked skull bone fractures. Around these injuries, extensive hemorrhage could be observed as a vital reaction. Asphyxial death had to be taken into consideration, because she was buried under the earth and sand for about 10 min; but we finally judged that the cause of her death was head injury by the power shovel inflicted during the attempted rescue.

The effect of shovel trait on Carabelli's trait in Taiwan Chinese and Aboriginal populations.

Science.gov (United States)

Hsu, J W; Tsai, P L; Hsiao, T H; Chang, H P; Lin, L M; Liu, K M; Yu, H S; Ferguson, D

1997-09-01

Chinese and other Mongoloid populations differ from Caucasoids by having a high prevalence of shovel trait and a low prevalence of Carabelli's trait. This study was conducted to compare the association between the shovel and the Carabelli's traits between Chinese and aboriginal Mongoloid populations. The research is designed to sample randomly a Chinese population and an aboriginal population having low admixture with neighboring populations. The Mongoloid aboriginal group was from the Bunun tribe who resides in an isolated alpine area in Taiwan. The effects of sex and age on Carabelli's trait were controlled in this study, as was the association between tooth size and Carabelli's trait. Our results show that males had more Carabelli's trait expressed on teeth than females in both of these two Mongoloid populations. The buccolingual diameter of Carabelli's trait teeth was larger than that of teeth without the trait. After controlling for sex, age, and tooth size, the existence of the shovel trait significantly increased the likelihood of having Carabelli's trait, especially in Chinese, which implies another significant ethnic feature for Mongoloid identification.

Logistic analysis of the effects of shovel trait on Carabelli's trait in a Mongoloid population.

Science.gov (United States)

Tsai, P L; Hsu, J W; Lin, L M; Liu, K M

1996-08-01

Mongoloid populations differ from Caucasoids by having a high prevalence of shovel trait and a low prevalence of Carabelli's trait. This study was conducted to investigate the effects of the shovel trait on Carabelli's trait in a Mongoloid population. The research design sought a population that resides in an isolated area and exhibits low admixture with neighboring populations. The Mongoloid group selected for study was the Bunun tribe of aborigines who inhabit an alpine area in Taiwan. The effects of sex and age on Carabelli's trait were controlled in this investigation, as was the association between tooth size and Carabelli's trait. Results show that males were more likely to have Carabelli's trait expressed on teeth than females. The buccolingual diameter of Carabelli's trait teeth was larger than that of teeth without the trait. After adjusting for sex, age, and tooth size, the existence of the shovel trait increased the likelihood of having Carabelli's trait by a factor of three, an effect that is significant.

Evaluation of the Kuper-Tuca SX36 snow plow cutting edges.

Science.gov (United States)

2010-06-01

For the winter of 2009-2010, the MaineDOT experimented with three sets of the Kuper Tuca SX36 : plow blades. Two of these sets were used in the Region 4, Bangor maintenance facility and one set was : used in the Region 3, Turner facility. : Maine...

Relação entre solo e haste sulcadora de semeadora em Latossolo escarificado em diferentes épocas Soil and planter shank relation in an Oxisol chiseled at different times

Directory of Open Access Journals (Sweden)

David Peres da Rosa

2008-03-01

Full Text Available O objetivo deste estudo foi avaliar a duração dos efeitos da escarificação em Latossolo Vermelho argiloso, pelo estudo da relação entre solo e haste sulcadora de semeadora. Os tratamentos foram: solo sob semeadura direta há 13 anos; solo escarificado há quatro anos (2001; solo escarificado há dois anos (2003; e solo escarificado há seis meses (2005, todos com ou sem tráfego de máquinas agrícolas. Dados de esforço vertical, momento associado à haste sulcadora, área de solo efetivamente mobilizada, resistência específica operacional, macroporosidade, microporosidade, porosidade total e densidade do solo foram coletados, e o esforço de tração na haste sulcadora foi calculado. A demanda de esforços aumentou com o incremento no decurso do tempo de execução da escarificação, e o solo escarificado há seis meses apresentou a menor demanda. O solo escarificado há quatro anos apresentou comportamento similar ao solo sob semeadura direta, e ofereceu a menor área mobilizada e a maior resistência operacional. Nos parâmetros físicos, diferenças foram observadas apenas na camada 0-0,10 m, onde o solo recém escarificado apresentou a maior macroporosidade, e menor microporosidade e densidade do solo. Após quatro anos, não se evidenciou mais o efeito da escarificação na relação entre solo e haste sulcadora.The objective of this study was to evaluate the chiseling effect duration in an Oxisol, based on the study of soil and planter shank relation. The treatments were: no-till for 13 years; four years since chiseling (2001; two years since chiseling (2002; and six months since chiseling (2005, where all treatments were submitted or not to traffic with agricultural machinery. Data about vertical force and moment associated to: shank, soil mobilized area, specific operational resistance, macroporosity, microporosity, total porosity and soil density, were collected, and draught on shank was calculated. Increasing of time since

A clay-shoveler's fracture with renal transplantation and osteoporosis: a case report

Directory of Open Access Journals (Sweden)

Unay Koray

2008-06-01

Full Text Available Abstract Introduction Clay-shoveler's fracture is a rare cervicodorsal spinous process fracture and there is little information regarding the prognosis of patients with this condition in conjunction with osteoporosis and corticosteroid use. Case presentation A 39-year-old man was admitted to our institution with a 6-month history of cervicodorsal pain prior to admission. The patient had previously undergone renal transplantation and was on corticosteroids, and had developed osteoporosis. We treated him with a cervical collar, non-steroidal anti-inflammatory agents and alendronate. The patient was advised against performing weight-bearing activities for 6 months. Conclusion Clay-shoveler's fracture with osteoporosis and corticosteroid use presented by fracture of the cervicodorsal aspect of the spinous processes may be successfully treated with a collar, alendronate and long-term rest.

Annual runoff and erosion in a recently burn Mediterranean forest - The effects of plowing and time-since-fire

Science.gov (United States)

Vieira, D. C. S.; Malvar, M. C.; Fernández, C.; Serpa, D.; Keizer, J. J.

2016-10-01

The impacts of forest fires on runoff and soil erosion have been assessed by many studies, so the effects of fires on the hydrological and geomorphological processes of burnt forest areas, globally and in the Mediterranean region, are well established. Few studies, however, have assessed post-fire runoff and erosion on large time scales. In addition, a limited number of studies are available that consider the effect of pre-fire land management practices on post-fire runoff and erosion. This study evaluated annual runoff and sediment losses, at micro plot scale, for 4 years after a wildfire in three eucalypt plantations with different pre-fire land management practices (i.e., plowed and unplowed). During the four years following the fire, runoff amounts and coefficients at the downslope plowed (1257 mm, 26%) and contour plowed eucalypt sites (1915 mm, 40%) were higher than at the unplowed site (865 mm, 14%). Sediment losses over the 4 years of study were also consistently higher at the two plowed sites (respectively, 0.47 and 0.83 Mg ha- 1 y- 1 at the downslope and contour plowed eucalypt site) than at the unplowed site (0.11 Mg ha- 1 y- 1). Aside from pre-fire land management, time-since-fire also seemed to significantly affect post-fire annual runoff and erosion. In general, annual runoff amounts and erosion rates followed the rainfall pattern. Runoff amounts presented a peak during the third year of monitoring while erosion rates reached their maximum one year earlier, in the second year. Runoff coefficients increased over the 4 years of monitoring, in disagreement to the window of disturbance post-fire recovery model, but sediment concentrations decreased over the study period. When compared with other long-term post-fire studies and with studies evaluating the effects of pre- and post-fire management practices, the results of the present work suggest that an ecosystem's recovery after fire is highly dependent on the background of disturbances of each site, as

Fungal Communities in Rhizosphere Soil under Conservation Tillage Shift in Response to Plant Growth

Directory of Open Access Journals (Sweden)

Ziting Wang

2017-07-01

Full Text Available Conservation tillage is an extensively used agricultural practice in northern China that alters soil texture and nutrient conditions, causing changes in the soil microbial community. However, how conservation tillage affects rhizosphere and bulk soil fungal communities during plant growth remains unclear. The present study investigated the effect of long-term (6 years conservation (chisel plow, zero and conventional (plow tillage during wheat growth on the rhizosphere fungal community, using high-throughput sequencing of the internal transcribed spacer (ITS gene and quantitative PCR. During tillering, fungal alpha diversity in both rhizosphere and bulk soil were significantly higher under zero tillage compared to other methods. Although tillage had no significant effect during the flowering stage, fungal alpha diversity at this stage was significantly different between rhizosphere and bulk soils, with bulk soil presenting the highest diversity. This was also reflected in the phylogenetic structure of the communities, as rhizosphere soil communities underwent a greater shift from tillering to flowering compared to bulk soil communities. In general, less variation in community structure was observed under zero tillage compared to plow and chisel plow treatments. Changes in the relative abundance of the fungal orders Capnodiales, Pleosporales, and Xylariales contributed the highest to the dissimilarities observed. Structural equation models revealed that the soil fungal communities under the three tillage regimes were likely influenced by the changes in soil properties associated with plant growth. This study suggested that: (1 differences in nutrient resources between rhizosphere and bulk soils can select for different types of fungi thereby increasing community variation during plant growth; (2 tillage can alter fungal communities' variability, with zero tillage promoting more stable communities. This work suggests that long-term changes in

Nanostructured wear resistant coating for reversible cultivator shovels: An experimental investigation

Energy Technology Data Exchange (ETDEWEB)

Dave, V., E-mail: vdaditya1000@gmail.com [Department of Electrical Engineering,College of Technology and Engineerin, MPUAT Udaipur, 313001,India (India); Rao, G. P., E-mail: ragrao38@gmail.com; Tiwari, G. S., E-mail: tiwarigsin@yahoo.com [Department of Farm Machinery and Power Engineering, MPUAT Udaipur, 313001,India (India); Sanger, A., E-mail: amitsangeriitr@gmail.com; Kumar, A., E-mail: 01ashraj@gmail.com; Chandra, R., E-mail: ramesfic@gmail.com [Institute Instrumentation Centre, Indian Institute of Technology Roorkee, Roorkee 247667 (India)

2016-04-13

Cultivator, one of the agriculture farm tool, extensively suffers from the wear problem. In this paper, we report nanostructured chromium nitrite (CrN) coating for the cultivator shovels to mitigate wear problem. The (CrN) coating was developed using DC magnetron sputtering technique at 200 °C. The structural, morphological, hydrophobic and wear properties were investigated using X-ray diffractometer, scanning electron microscope, contact angle goniometer and custom designed soil bin assembly. The XRD reveals that the deposited coating was polycrystalline in nature with cubic structure. Also, The deposited coating was found to be anti wear resistant as well as hydrophobic in nature. The gravimetric wear for the coating developed at 200 °C coated was found out to be 8.15 gm and for non coated it was 14.48 gm tested for 100 hrs. The roughness of the coating plays an important role in determining the hydrophobicity of the coated film. Roughness and contact angle measured for 200 °C coated shovel was found out to be 11.17 nm and 105 ° respectively.

Nanostructured wear resistant coating for reversible cultivator shovels: An experimental investigation

International Nuclear Information System (INIS)

Dave, V.; Rao, G. P.; Tiwari, G. S.; Sanger, A.; Kumar, A.; Chandra, R.

2016-01-01

Cultivator, one of the agriculture farm tool, extensively suffers from the wear problem. In this paper, we report nanostructured chromium nitrite (CrN) coating for the cultivator shovels to mitigate wear problem. The (CrN) coating was developed using DC magnetron sputtering technique at 200 °C. The structural, morphological, hydrophobic and wear properties were investigated using X-ray diffractometer, scanning electron microscope, contact angle goniometer and custom designed soil bin assembly. The XRD reveals that the deposited coating was polycrystalline in nature with cubic structure. Also, The deposited coating was found to be anti wear resistant as well as hydrophobic in nature. The gravimetric wear for the coating developed at 200 °C coated was found out to be 8.15 gm and for non coated it was 14.48 gm tested for 100 hrs. The roughness of the coating plays an important role in determining the hydrophobicity of the coated film. Roughness and contact angle measured for 200 °C coated shovel was found out to be 11.17 nm and 105 ° respectively.

Nanostructured wear resistant coating for reversible cultivator shovels: An experimental investigation

Science.gov (United States)

Dave, V.; Rao, G. P.; Tiwari, G. S.; Sanger, A.; Kumar, A.; Chandra, R.

2016-04-01

Cultivator, one of the agriculture farm tool, extensively suffers from the wear problem. In this paper, we report nanostructured chromium nitrite (CrN) coating for the cultivator shovels to mitigate wear problem. The (CrN) coating was developed using DC magnetron sputtering technique at 200 °C. The structural, morphological, hydrophobic and wear properties were investigated using X-ray diffractometer, scanning electron microscope, contact angle goniometer and custom designed soil bin assembly. The XRD reveals that the deposited coating was polycrystalline in nature with cubic structure. Also, The deposited coating was found to be anti wear resistant as well as hydrophobic in nature. The gravimetric wear for the coating developed at 200 °C coated was found out to be 8.15 gm and for non coated it was 14.48 gm tested for 100 hrs. The roughness of the coating plays an important role in determining the hydrophobicity of the coated film. Roughness and contact angle measured for 200 °C coated shovel was found out to be 11.17 nm and 105 ° respectively.

Soil Properties and Plant Biomass Production in Natural Rangeland Management Systems

Directory of Open Access Journals (Sweden)

Romeu de Souza Werner

Full Text Available ABSTRACT Improper management of rangelands can cause land degradation and reduce the economic efficiency of livestock activity. The aim of this study was to evaluate soil properties and quantify plant biomass production in four natural rangeland management systems in the Santa Catarina Plateau (Planalto Catarinense of Brazil. The treatments, which included mowed natural rangeland (NR, burned natural rangeland (BR, natural rangeland improved through the introduction of plant species after harrowing (IH, and natural rangeland improved through the introduction of plant species after chisel plowing (IC, were evaluated in a Nitossolo Bruno (Nitisol. In the improved treatments, soil acidity was corrected, phosphate fertilizer was applied, and intercropped annual ryegrass (Lolium multiflorum, velvet grass (Holcus lanatus, and white clover (Trifolium repens were sown. Management systems with harrowed or chisel plowed soil showed improved soil physical properties; however, the effect decreased over time and values approached those of burned and mowed natural rangelands. Natural rangeland systems in the establishment phase had little influence on soil organic C. The mowed natural rangeland and improved natural rangeland exhibited greater production of grazing material, while burning the field decreased production and increased the proportion of weeds. Improvement of the natural rangelands increased leguminous biomass for pasture.

A Rare Bilateral Presentation of Multiple Dens Invaginatus, Shovel-Shaped Incisor and Talon Cusp With Mesiodens.

Science.gov (United States)

Hegde, S; Jain, M; Shubha, A B

2014-01-01

The aim of this paper is to describe a unique and unusual case of concomitant appearance of morphological dental anomalies in the maxillary anterior region, along with its management in a patient with no systemic abnormality. This case report describes the clinical and radiographic features of talon cusp, dens invaginatus, shovel-shaped incisors and a supernumerary tooth occurring in a single patient, which is a rare presentation. All 4 permanent maxillary incisors had dens invaginatus, the permanent maxillary canines showed the presence of talon cusps, the permanent maxillary central incisors were shovel-shaped and an erupted mesiodens was also observed. Treatment included restorative, surgical and orthodontic approaches.

Tow plows could help Michigan save time and money on winter maintenance : research spotlight.

Science.gov (United States)

2016-11-01

As winter maintenance costs rise, MDOT is looking into innovative approaches to increase snow removal efficiency. As part of this effort, the department recently estimated the costs and benefits of incorporating tow plows into its equipment fleet. Re...

Coordinating decentralized optimization of truck and shovel mining operations

Energy Technology Data Exchange (ETDEWEB)

Cheng, R.; Fraser Forbes, J. [Alberta Univ., Edmonton, AB (Canada). Dept. of Chemical and Materials Engineering; San Yip, W. [Suncor Energy, Fort McMurray, AB (Canada)

2006-07-01

Canada's oil sands contain the largest known reserve of oil in the world. Oil sands mining uses 3 functional processes, ore hauling, overburden removal and mechanical maintenance. The industry relies mainly on truck-and-shovel technology in its open-pit mining operations which contributes greatly to the overall mining operation cost. Coordination between operating units is crucial for achieving an enterprise-wide optimal operation level. Some of the challenges facing the industry include multiple or conflicting objectives such as minimizing the use of raw materials and energy while maximizing production. The large sets of constraints that define the feasible domain pose as challenge, as does the uncertainty in system parameters. One solution lies in assigning truck resources to various activities. This fully decentralized approach would treat the optimization of ore production, waste removal and equipment maintenance independently. It was emphasized that mine-wide optimal operation can only be achieved by coordinating ore hauling and overburden removal processes. For that reason, this presentation proposed a coordination approach for a decentralized optimization system. The approach is based on the Dantzig-Wolfe decomposition and auction-based methods that have been previously used to decompose large-scale optimization problems. The treatment of discrete variables and coordinator design was described and the method was illustrated with a simple truck and shovel mining simulation study. The approach can be applied to a wide range of applications such as coordinating decentralized optimal control systems and scheduling. 16 refs., 3 tabs., 2 figs.

Quantification of Soil Physical Properties by Using X-Ray Computerized Tomography (CT) and Standard Laboratory (STD) Methods

Energy Technology Data Exchange (ETDEWEB)

Sanchez, Maria Ambert [Iowa State Univ., Ames, IA (United States)

2003-12-12

The implementation of x-ray computerized tomography (CT) on agricultural soils has been used in this research to quantify soil physical properties to be compared with standard laboratory (STD) methods. The overall research objective was to more accurately quantify soil physical properties for long-term management systems. Two field studies were conducted at Iowa State University's Northeast Research and Demonstration Farm near Nashua, IA using two different soil management strategies. The first field study was conducted in 1999 using continuous corn crop rotation for soil under chisel plow with no-till treatments. The second study was conducted in 2001 and on soybean crop rotation for the same soil but under chisel plow and no-till practices with wheel track and no-wheel track compaction treatments induced by a tractor-manure wagon. In addition, saturated hydraulic (K{sub s}) conductivity and the convection-dispersion (CDE) model were also applied using long-term soil management systems only during 2001. The results obtained for the 1999 field study revealed no significant differences between treatments and laboratory methods, but significant differences were found at deeper depths of the soil column for tillage treatments. The results for standard laboratory procedure versus CT method showed significant differences at deeper depths for the chisel plow treatment and at the second lower depth for no-till treatment for both laboratory methods. The macroporosity distribution experiment showed significant differences at the two lower depths between tillage practices. Bulk density and percent porosity had significant differences at the two lower depths of the soil column. The results obtained for the 2001 field study showed no significant differences between tillage practices and compaction practices for both laboratory methods, but significant differences between tillage practices with wheel track and no-wheel compaction treatments were found along the soil

Nitrous oxide emissions from corn-soybean systems in the midwest.

Science.gov (United States)

Parkin, Timothy B; Kaspar, Thomas C

2006-01-01

Soil N2O emissions from three corn (Zea mays L.)-soybean [Glycine max (L.) Merr.] systems in central Iowa were measured from the spring of 2003 through February 2005. The three managements systems evaluated were full-width tillage (fall chisel plow, spring disk), no-till, and no-till with a rye (Secale cereale L. 'Rymin') winter cover crop. Four replicate plots of each treatment were established within each crop of the rotation and both crops were present in each of the two growing seasons. Nitrous oxide fluxes were measured weekly during the periods of April through October, biweekly during March and November, and monthly in December, January, and February. Two polyvinyl chloride rings (30-cm diameter) were installed in each plot (in and between plant rows) and were used to support soil chambers during the gas flux measurements. Flux measurements were performed by placing vented chambers on the rings and collecting gas samples 0, 15, 30, and 45 min following chamber deployment. Nitrous oxide fluxes were computed from the change in N2O concentration with time, after accounting for diffusional constraints. We observed no significant tillage or cover crop effects on N2O flux in either year. In 2003 mean N2O fluxes were 2.7, 2.2, and 2.3 kg N2O-N ha(-1) yr(-1) from the soybean plots under chisel plow, no-till, and no-till + cover crop, respectively. Emissions from the chisel plow, no-till, and no-till + cover crop plots planted to corn averaged 10.2, 7.9, and 7.6 kg N2O-N ha(-1) yr(-1), respectively. In 2004 fluxes from both crops were higher than in 2003, but fluxes did not differ among the management systems. Fluxes from the corn plots were significantly higher than from the soybean plots in both years. Comparison of our results with estimates calculated using the Intergovernmental Panel on Climate Change default emission factor of 0.0125 indicate that the estimated fluxes underestimate measured emissions by a factor of 3 at our sites.

Progress report on the Pegasus plow, October--December 1996 and January--March 1997

Energy Technology Data Exchange (ETDEWEB)

NONE

1997-04-01

This is a progress report on a contract related to the invention of a plow which will bury organic waste from farm fields, either in the form of shredded stubble or as whole stalks. The report addresses completion of various tasks in the contract, primarily related to field testing and trying to move the product into the market place.

The dependence of the content of Cs137 forms in sod-podzolic sabulous soil of different degree of humidification on the basic soil tillage

International Nuclear Information System (INIS)

Tsybulko, N.N.; Ermolenko, A.V.; Lazarevich, S.S.

2011-01-01

The dependence of the content of 137 Cs-forms in sod-podzolic sabulous soils of different degree of humidification on the basic soil tillage is presented. Structure (in %) of plant available 137Cs in automorphic and semi-hydromorphic soils is shown. The influence of soil tillage type on 137Cs content is analyzed per 2007-2008. Content (in %) of plant available 137Cs in automorphic and semi-hydromorphic soils during moldboard plowing, beardless plowing, surface disc plowing and minimum tillage is evaluated. In sod-podzolic sabulous soils with 137 Cs pollution density which equals to 13-15 Cu/km2 the content of the accessible for plants forms (water-soluble, exchangeable, mobile forms) makes in average 9-11%; of those inaccessible (not exchangeable, fixed) 89-91%. It is established, that the degree of the hydromorphic feature in sod-podzolic sabolous soil influence the content of accessible forms of 1376cs in its top layer. The chisel tillage and the minimum tillage make it possible to decrease the accessible 137Cs connections by 2-4%

Studying quick coupler efficiency in working attachment system of single-bucket power shovel

Science.gov (United States)

Duganova, E. V.; Zagorodniy, N. A.; Solodovnikov, D. N.; Korneyev, A. S.

2018-03-01

A prototype of a quick-disconnect connector (quick coupler) with an unloaded retention mechanism was developed from the analysis of typical quick couplers used as intermediate elements for power shovels of different manufacturers. A method is presented, allowing building a simulation model of the quick coupler prototype as an alternative to physical modeling for further studies.

Determination of crop residues and the physical and mechanical properties of soil in different tillage systems

Directory of Open Access Journals (Sweden)

P Ahmadi Moghaddam

2016-04-01

Full Text Available Introduction: Monitoring and management of soil quality is crucial for sustaining soil function in ecosystem. Tillage is one of the management operations that drastically affect soil physical quality. Conservation tillage methods are one of the efficient solutions in agriculture to reduce the soil erosion, air pollution, energy consumption, and the costs, if there is a proper management on the crop residues. One of the serious problems in agriculture is soil erosion which is rapidly increased in the recent decades as the intensity of tillage increases. This phenomenon occurs more in sloping lands or in the fields which are lacking from crop residues and organic materials. The conservation tillage has an important role in minimizing soil erosion and developing the quality of soil. Hence, it has attracted the attention of more researchers and farmers in the recent years. Materials and Methods: In this study, the effect of different tillage methods has been investigated on the crop residues, mechanical resistance of soil, and the stability of aggregates. This research was performed on the agricultural fields of Urmia University, located in Nazloo zone in 2012. Wheat and barley were planted in these fields, consecutively. The soil texture of these fields was loamy clay and the factorial experiments were done in a completely randomized block design. In this study, effect of three tillage systems including tillage with moldboard (conventional tillage, tillage with disk plow (reduced tillage, chisel plow (minimum tillage and control treatment on some soil physical properties was investigated. Depth is second factor that was investigated in three levels including 0-60, 60-140, and 140-200 mm. Moreover, the effect of different percentages of crop residues on the rolling resistance of non-driving wheels was studied in a soil bin. The contents of crop residues have been measured by using the linear transects and image processing methods. In the linear

Molecular and phenotypic diversity in Chionactis occipitalis (Western Shovel-nosed Snake), with emphasis on the status of C. o. klauberi (Tucson Shovel-nosed Snake).

Science.gov (United States)

Wood, D.A.; Meik, J.M.; Holycross, A.T.; Fisher, R.N.; Vandergast, A.G.

2008-01-01

Chionactis occipitalis (Western Shovel-nosed Snake) is a small colubrid snake inhabiting the arid regions of the Mojave, Sonoran, and Colorado deserts. Morphological assessments of taxonomy currently recognize four subspecies. However, these taxonomic proposals were largely based on weak morphological differentiation and inadequate geographic sampling. Our goal was to explore evolutionary relationships and boundaries among subspecies of C. occipitalis, with particular focus on individuals within the known range of C. o. klauberi (Tucson Shovel-nosed snake). Population sizes and range for C. o. klauberi have declined over the last 25 years due to habitat alteration and loss prompting a petition to list this subspecies as endangered. We examined the phylogeography, population structure, and subspecific taxonomy of C. occipitalis across its geographic range with genetic analysis of 1100 bases of mitochondrial DNA sequence and reanalysis of 14 morphological characters from 1543 museum specimens. We estimated the species gene phylogeny from 81 snakes using Bayesian inference and explored possible factors influencing genetic variation using landscape genetic analyses. Phylogenetic and population genetic analyses reveal genetic isolation and independent evolutionary trajectories for two primary clades. Our data indicate that diversification between these clades has developed as a result of both historical vicariance and environmental isolating mechanisms. Thus these two clades likely comprise 'evolutionary significant units' (ESUs). Neither molecular nor morphological data are concordant with the traditional C. occipitalis subspecies taxonomy. Mitochondrial sequences suggest specimens recognized as C. o. klauberi are embedded in a larger geographic clade whose range has expanded from western Arizona populations, and these data are concordant with clinal longitudinal variation in morphology. ?? 2007 Springer Science+Business Media B.V.

Modelling open pit shovel-truck systems using the Machine Repair Model

Energy Technology Data Exchange (ETDEWEB)

Krause, A.; Musingwini, C. [CBH Resources Ltd., Sydney, NSW (Australia). Endeaver Mine

2007-08-15

Shovel-truck systems for loading and hauling material in open pit mines are now routinely analysed using simulation models or off-the-shelf simulation software packages, which can be very expensive for once-off or occasional use. The simulation models invariably produce different estimations of fleet sizes due to their differing estimations of cycle time. No single model or package can accurately estimate the required fleet size because the fleet operating parameters are characteristically random and dynamic. In order to improve confidence in sizing the fleet for a mining project, at least two estimation models should be used. This paper demonstrates that the Machine Repair Model can be modified and used as a model for estimating truck fleet size in an open pit shovel-truck system. The modified Machine Repair Model is first applied to a virtual open pit mine case study. The results compare favourably to output from other estimation models using the same input parameters for the virtual mine. The modified Machine Repair Model is further applied to an existing open pit coal operation, the Kwagga Section of Optimum Colliery as a case study. Again the results confirm those obtained from the virtual mine case study. It is concluded that the Machine Repair Model can be an affordable model compared to off-the-shelf generic software because it is easily modelled in Microsoft Excel, a software platform that most mines already use.

[Comparison of piezosurgery and chisel osteotomy in the extraction of mandibular impacted third molars].

Science.gov (United States)

Gao, Yongbo; Jiang, Ai; Li, Boyou; Yang, Liming

2011-08-01

To study the effect of piezosurgery in the extraction of mandibular impacted third molars. 228 mandibular impacted third molars with relative difficulty for extraction according to the scheme of degree of difficulty for extraction were included in the study, and were divided into two groups (114 teeth each group): Test group (treated by piezosurgery), control group (treated by traditional chisel osteotomy). The surgery time and pain, restriction of mouth opening and facial swelling after surgery, were evaluated in both groups. The average surgery time was (16 +/- 5.2) min in test group and (30 +/- 8.7) min in control group. The surgery time, pain, facial swelling rate, and restriction of mouth opening were lower than control group (Ppiezosurgery was significantly shorter and the complications are obviously reduced.

X-ray computed microtomography analysis of the influence of different agricultural treatments on the topsoil porosity of a Grey Brown Luvisol from Ontario

Science.gov (United States)

Taina, I. A.; Heck, R. J.; Scaiff, N. T.

2009-05-01

One of the most important applications of X-ray computed tomography (CT) for the study of soil is the characterization of the shape and spatial distribution of pores. Analysis of 3D X-ray CT image data, related to different pore categories, can provide insight to soil structural changes, which have implications in water infiltration and soil aeration, resulting from agricultural practices. The aim of this study was to evaluate changes in the spatial characteristics of voids, due to tillage practices, in the Ap horizon of an Orthic Grey- Brown Luvisol (located at the Elora Research Station of the University of Guelph). Undisturbed oriented soil samples were collected from ten plots representing different tillage treatments: spring moldboard plow, spring moldboard plow, cultivate and pack, fall moldboard plow, cultivate and pack, spring tandem disc, no cultivator, fall offset disc, fall offset disc, cultivate and pack, fall chisel plow, cultivate and pack, zero zone till (soys twin rows), zero tillage (long term), and zero tillage (corn residue removed in row, soys twin rows). Since the utilization of standardized classes, in the quantification of similar features, proved to be necessary in order to obtain comparable results, categories of pores, separated according to their size, circularity and orientation were considered in the interpretation of data. Total volume of pores and volume percentage of each class were calculated, revealing substantial differences among the analyzed soil samples.

Effect of cover crops on emergence and growth of carrot (Daucus carota L. in no-plow and traditional tillage

Directory of Open Access Journals (Sweden)

Marzena Błażewicz-Woźniak

2015-03-01

Full Text Available The aim of the experiment was to determine the influence of cover crop biomass incorporated into the soil at different times and using different treatments on carrot emergence and growth. 7 species of cover crops were included in the study: Secale cereale, Avena sativa, Vicia sativa, Sinapis alba, Phacelia tanacetifolia, Fagopyrum esculentum, and Helianthus annuus.  Number of emerged carrot plants significantly depended on the cover crop used and on the method of pre-winter and spring pre-sowing tillage. Carrot emerged best after a rye or oats cover crop. Regardless of the cover crop species used, the largest number of carrots emerged in cultivation on ridges. In other variants of no-plow tillage, number of seedlings was significantly lower and did not differ from that under traditional plow tillage. The highest leaf rosettes were formed by carrot growing after a rye or oats cover crop. The highest rosettes were produced by carrots in the treatments where tillage was limited to the use of a tillage implement in spring and the lowest ones after pre-winter plowing. The effect of tillage on the emergence and height of carrot leaves largely depended on weather conditions in the successive years of the study. The largest number of leaves was found in carrots grown after a buckwheat cover crop and in cultivation without cover crop, while the smallest one after phacelia and white mustard. Carrots produced the largest number of leaves after a sunflower cover crop and the use of a tillage implement in spring, while the number of leaves was lowest when the mustard biomass was incorporated into the soil in spring. The use of cover crops significantly increased the mass of leaves produced by carrot as compared to the cultivation without cover crop. The largest mass of leaves was produced by carrots grown after the phacelia and mustard cover crops. Conventional plow tillage and pre-winter tillage using a stubble cultivator promoted an increase in the mass

Influence of deep cryogenic treatment on structure and wear resistance of materials of hydraulic breaker chisels

Science.gov (United States)

Bolobov, V. I.; BinhLe, Thanh

2018-03-01

It is shown that shallow cryogenic treatment at -75°C (SCT) of the materials of hydraulic breaker chisels - P20, 1080 and D2 steels leads to a decrease (44 ÷ 82%) in the amount of retained austenite and an increase (26 ÷ 99%) in the amount of carbides in the structure of hardened steel, which is accompanied by an increase in its hardness (1.4 ÷ 2.1%) and abrasive wear resistance (10 ÷ 31%) with a simultaneous decrease in impact toughness (19 ÷ 24%). Deep cryogenic treatment at -196°C (DCT) and subsequent low-temperature tempering of D2 steel leads to a significant increase in its wear resistance (98%) and impact toughness (32%).

Economic Evaluation for Integrated Use of Glyphosate Herbicide and Tillage Combinations Applied before Sowing of Rain-Fed Wheat (Triticum Aestivum L.)

International Nuclear Information System (INIS)

Ali, S.; Malik, M. A.; Ansar, M.; Qureshi, R.

2016-01-01

Low average yield, scarce soil moisture and less soil fertility are major problems of rain-fed wheat. Economic feasibility of different tillage systems integrated with glyphosate herbicide and wheat crop productivity was determined through field experiments conducted at the University Research Farm of Pir Mehr Ali Shah Arid Agriculture University Rawalpindi, Pakistan during summer and winter seasons of 2012-13 and 2013-14. Different combinations of tillage and glyphosate herbicide were used in the fallow period (summer season) that were consisted of following treatments viz. T1 = 1 Mould board Plowing + 8 Cultivations, T2 = No-Till + Glyphosate, T3 = 1 Mould board Plowing + Glyphosate, T4 = 1 MB Plowing + 4 Cultivations, T5 = 1 Disc Harrowing + Glyphosate, T6 = 1 Disc Harrowing + 4 Cultivations and T7 = 1 Chiseling + Glyphosate. Results showed that the highest yield viz. 3.5132, 3.1242 t ha-1 were obtained in the case of conventional tillage (T1) and reduced tillage (T4), respectively with a net profit of 888.92 and 839.35 $ ha-1. The yield was positively affected by tillage intensity. In conclusion, T1 is recommended for getting maximum net return from wheat grown in rain-fed areas of Pakistan. (author)

Determination of danger categories of chisel waste, which are made by investigation and operation of oil-and-gas deposits in the Caspian Sea basin by calculation method

Directory of Open Access Journals (Sweden)

A. A. Gadzhiyev

2007-01-01

Full Text Available In this article there is undertaken the attempt to define danger categories of the chisel solutions formed at investigation and operation of oil-and-gas deposits in Caspian sea basin by making calculations. Definition of a danger category was made in view of their initial structure and at various stages of drilling.

Respuesta del girasol a diferentes profundidades de incorporación del fertilizante Response of sunflower to deep fertilization

Directory of Open Access Journals (Sweden)

Peña C. Jorge

1989-12-01

Full Text Available El estudio se realizó con el objetivo de analizar la respuesta del girasol a la fertilización a diferentes profundidades. Los tratamientos fueron: incorporación del fertilizante a 10 cm con rastrillo pulidor, a 15 cm con rastra-arado, a 25 cm con arado de discos y a 30 cm con cincel-abonador; testigo absoluto sin fertilizar. Se presentaron incrementos en rendimiento a la incorporación del fertilizante a 30 cm, mostrando diferencias altamente significativas con la fertilización a 10 cm y el testigo, los incrementos en rendimiento fueron de 64.9% y 109.7% en promedio para cada uno de los semestres. Igualmente, se observaron aumentos en el diámetro del capítulo, en el peso de 1.000 semillas, en la altura de planta y disminución en el porcentaje de semillas vanas en el capitulo. Los porcentajes de cáscara, almendra, aceite y proteína no respondieron a la fertilización profunda. Desde el punto de vista económico, la mejor alternativa correspondió a la fertilización a 30 cm con cincel-abonador; la incorporación a 15 cm, con la rastra-arado, se presentó como según da opción con una tasa de retorno marginal aceptable, la cual para la región se estimó en 100 % como valor mínimo.The objective of the study was to analize the response in yield and other agronomic characteristics of sunflower based on different depths of fertilizer application. The treatments were application of fertilizer 10 cm depth tandem disk harrow, 15 cm depth with disk harrow, 25 cm depth with disk plow and 30 cm depth with chisel; an absolut control was also included. The incorporation with chisel was significantly higher than disk harrow and the control, but not with tandem disk harrow and disk plow. Increments of the chisel treatment with respect to disk harrow for the two consecutive semester were thus: for yield 64.9% and 109.7%; for capitulum diameter 20.1% and 29.9%: for weight of 1.000 seeds 34.7% and 37.1 % for plant height 15.6 % and 27.7 %, and a

Design, development and performance of a disk plow combined with rotary blades

International Nuclear Information System (INIS)

Hashemi, A; Ahmad, D; Othman, J; Sulaiman, S

2012-01-01

Disk plow combined with rotary blades, defined as comboplow, is used for soil preparation for planting. The comboplow includes four units: Chassis, concave disk, transmission system and rotary blades. A multiple tillage operation is reduced in a single pass resulting in a potential reduction of soil compaction, labor, fuel cost and saving in time. The comboplow was tested at University Putra Malaysia Research Park, Serdang, Selangor, Malaysia, on three different plots of 675 m 2 in the year 2010/2011. The treatments were three types of blade [(straight (S),curved (c) and L-shaped)] and three rotary speeds (130,147and 165 rpm). The parameters were Mean Weight Diameter Dry Basis (MWD d ), Mean weight Diameter Wet Basis (MWD W ), Aggregate Stability Index (SI) and Instability Index (II).

Macrodontia, shovel-shaped incisors, and multituberculism: probable Ekman-Westborg-Julin trait.

Science.gov (United States)

Reardon, Gayle Tieszen; Slayton, L Rebecca; Norby, Clinton; Geneser, Teresa

2012-01-01

Multiple macrodontia is a rare finding and is defined as a condition in which a tooth is significantly larger than normal. Macrodontia may occur as an isolated finding, part of a group of dental anomalies, or as a component of a syndrome with multiple oral and systemic manifestations. The purpose of this paper was to report a case of macrodontia affecting all permanent teeth and exhibiting shovel-shaped maxillary and mandibular incisors and multituberculate molars and premolars. Some or all of this patient's characteristics have been reported in both males and females, with a ratio of 5:2. No inheritance pattern has been established, as these traits have generally occurred spontaneously. As more individuals are identified and as molecular techniques continue to advance, it is probable that a gene or genes responsible for macrodontia and the associated traits will be identified.

Soil physical indicators of management systems in traditional agricultural areas under manure application

Directory of Open Access Journals (Sweden)

Luiz Paulo Rauber

Full Text Available ABSTRACT Studies of the successive application of manure as fertilizer and its combined effect with long-term soil management systems are important to the identification of the interdependence of physical attributes. The aim of this study was to evaluate changes in the physical properties of a Rhodic Kandiudox under management systems employing successive applications of pig slurry and poultry litter, and select physical indicators that distinguish these systems using canonical discriminant analysis (CDA. The systems consisting of treatments including land use, management and the application time of organic fertilizers are described as follows: silage maize under no-tillage (NT-M7 years; silage maize under conventional tillage (CT-M20 years; annual pasture with chisel plowing (CP-P3 years; annual pasture with chisel plowing (CP-P15 years; perennial pasture without tillage (NT-PP20 years; and no-tillage yerba mate (NT-YM20 years and were compared with native forest (NF and native pasture (NP. Soil samples were collected from the layers at the following depths: 0.0-0.05, 0.05-0.10, and 0.10-0.20 m, and were analyzed for bulk density, porosity, aggregation, flocculation, penetration resistance, water availability and total clay content. Canonical discriminant analysis was an important tool in the study of physical indicators of soil quality. Organic fertilization, along with soil management, influences soil structure and its porosity. Total porosity was the most important physical property in the distinction of areas with management systems and application times of manure for the 0.0-0.05 and 0.10-0.20 m layers. Soil aeration and micropores differentiated areas in the 0.05-0.10 m layer. Animal trampling and machinery traffic were the main factors inducing compaction of this clayey soil.

Tryptophan as a Molecular Shovel in the Glycosyl Transfer Activity of Trypanosoma cruzi Trans-sialidase

Science.gov (United States)

Mitchell, Felicity L.; Miles, Steven M.; Neres, João; Bichenkova, Elena V.; Bryce, Richard A.

2010-01-01

Abstract Molecular dynamics investigations into active site plasticity of Trypanosoma cruzi trans-sialidase, a protein implicated in Chagas disease, suggest that movement of the Trp312 loop plays an important role in the enzyme's sialic acid transfer mechanism. The observed Trp312 flexibility equates to a molecular shovel action, which leads to the expulsion of the donor aglycone leaving group from the catalytic site. These computational simulations provide detailed structural insights into sialyl transfer by the trans-sialidase and may aid the design of inhibitors effective against this neglected tropical disease. PMID:20441732

Evaluation of stereoscopic video cameras synchronized with the movement of an operator's head on the teleoperation of the actual backhoe shovel

Science.gov (United States)

Minamoto, Masahiko; Matsunaga, Katsuya

1999-05-01

Operator performance while using a remote controlled backhoe shovel is described for three different stereoscopic viewing conditions: direct view, fixed stereoscopic cameras connected to a helmet mounted display (HMD), and rotating stereo camera connected and slaved to the head orientation of a free moving stereo HMD. Results showed that the head- slaved system provided the best performance.

Fabrication of nanochannels on polyimide films using dynamic plowing lithography

Science.gov (United States)

Stoica, Iuliana; Barzic, Andreea Irina; Hulubei, Camelia

2017-12-01

Three distinct polyimide films were analyzed from the point of view of their morphology in order to determine if their surface features can be adapted for applications where surface anisotropy is mandatory. Channels of nanometric dimensions were created on surface of the specimens by using a less common atomic force microscopy (AFM) method, namely Dynamic Plowing Lithography (DPL). The changes generated by DPL procedure were monitored through the surface texture and other functional parameters, denoting the surface orientation degree and also bearing and fluid retention properties. The results revealed that in the same nanolithography conditions, the diamine and dianhydride moieties have affected the characteristics of the nanochannels. This was explained based on the aliphatic/aromatic nature of the monomers and the backbone flexibility. The reported data are of great importance in designing custom nanostructures with enhanced anisotropy on surface of polyimide films for liquid crystal orientation or guided cell growth purposes. At the end, to track the effect of the nanolithography process on the tip sharpness, degradation and contamination, the blind tip reconstruction was performed on AFM probe, before and after lithography experiments, using TGT1 test grating AFM image.

Eficiência da escarificação mecânica e biológica na melhoria dos atributos físicos de um latossolo muito argiloso e no incremento do rendimento de soja Efficiency of mechanical and biological chiseling in the improvement of physical attributes of a heavy clay oxisol and the increment of soybean yield

Directory of Open Access Journals (Sweden)

Rodrigo da Silveira Nicoloso

2008-08-01

tratamento ESC-Av teve comportamento intermediário. Os tratamentos SD-Nb+Av e ESC-Nb+Av aumentaram, em média, 46,6 % a lâmina de água infiltrada em relação aos tratamentos SD-Av e ESC-Av. O maior rendimento de grãos de soja foi observado no tratamento ESC-Nb+Av (3,73 Mg ha-1, que não diferiu significativamente do SD-Nb+Av (3,49 Mg ha-1. A escarificação mecânica do solo teve efeito temporário, e não foram constatadas melhores condições físicas do solo após nove meses, com exceção do aumento da porosidade total e macroporosidade do solo na camada 0-0,05 m. Por outro lado, a escarificação biológica aumentou a macroporosidade do solo, diminuiu sua resistência à penetração e melhorou a infiltração de água. A escarificação mecânica foi uma alternativa eficiente em melhorar as condições físicas do Latossolo textura muito argilosa quando associada à escarificação biológica, que preveniu a reconsolidação do solo.Compaction is one of the main causes of yield decreases in agricultural soils. Mechanical chiseling has been suggested to reduce soil compaction in long-term no-tillage systems. Another option to alleviate soil compaction is the use of cover crops, such as forage radish, with a well-developed tap root system and the capacity of growing into soil compacted layers, forming stable biopores and improving the soil physical properties. This study aimed to evaluate the efficiency of a mechanical (chisel plow and biological (forage radish soil decompaction method or the combination of both to improve the physical properties of a very clayey texture Oxisol and to increase soybean grain yield under no-tillage. The treatments were: black oat on no-till (NT-O, consortium of forage radish and black oat on no-till (NT-R+O, black oat on chiseled soil (CH-O and consortium of forage radish and black oat on chiseled soil (CH-R+O. The following properties were evaluated: soil bulk density, macroporosity, microporosity and total porosity in the layers 0

Plow, town, and gown: the politics of family practice in 1960s America.

Science.gov (United States)

Tobbell, Dominique

2013-01-01

In the 1960s, general practitioners organized themselves into a state-based nationwide political movement that lobbied state legislators and state-funded medical schools to create departments of family practice. They framed their calls in the context of the national shortages of primary care physicians by arguing that those medical schools that received state funding had an obligation to the state to train sufficient numbers of primary care physicians to ensure the health care needs of the state's residents would be met. As this article reveals, two defining features of this activism were rural politics and the politics of town and gown. The history of family practice thus introduces a new dimension to the familiar dyad of town and gown relations: the plow-rural physicians who brought to the medical politics of the post-World War II United States a distinctive and powerful set of political, social, and economic interests.

Compressibilidade de um Argissolo sob plantio direto escarificado e compactado Compressibility of a Paleudalf chisel plough and compacted under no-tillage

Directory of Open Access Journals (Sweden)

Cláudia Liane Rodrigues de Lima

2006-12-01

Full Text Available A compressibilidade do solo é dependente do tipo, da intensidade, da freqüência da força aplicada por máquinas agrícolas e dos sistemas de manejo adotados. O objetivo deste estudo foi avaliar o efeito da intensidade do tráfego de máquinas agrícolas na compressibilidade de um Argissolo Vermelho distrófico arênico sob plantio direto escarificado e compactado. Foram testados os tratamentos: PD = plantio direto desde o ano de 1989; PDE1 = plantio direto escarificado em dezembro de 2002 e fevereiro de 2004; PDE2 = plantio direto escarificado em dezembro de 2004; PDC1, PDC2 e PDC3 = plantio direto com quatro passadas de máquina com massa total de 10Mg em dezembro, respectivamente para os anos agrícolas 2001/2002, 2002/2003 e 2001/2002 - 2002/2003. Amostras com estrutura de solo preservada, na camada de 0,08-0,13m, foram utilizadas para avaliar os parâmetros compressivos do solo. No sistema de plantio direto sob compactação adicional, foram obtidos maiores e menores valores, respectivamente, de densidade e índice de compressão do solo. A densidade e o índice de compressão do solo são parâmetros consistentes e sensíveis para detectar alterações na estrutura do solo. O modelo não-linear (McNabb & BOERSMA, 1993 é uma ferramenta potencial para determinação da densidade do solo sob plantio direto, a partir da densidade inicial e das pressões aplicadas ao solo.Soil compressibility depends on the type, intensity and frequency of the load applied by agricultural machinery and on soil management. This study was aimed at evaluating the effect of traffic of agricultural machines on the compressibility of a Paleudalf chisel plough and compacted under no-tillage. In an area under no tillage since 1989, the following treatments were used for sampling: PD = no tillage since 1989; PDE1 = no tillage plus chisel plough in december the year 2002 and february 2004; PDE2 = no tillage plus chisel plough in december 2004; PDC1, PDC2 and PDC3

Development of a portable teleoperated robot for the manipulation of a backhoe shovel for the restoration of disaster-stricken sites

Science.gov (United States)

Tanaka, Toshihiko; Sakai, Yosiharu; Konomi, Yosiyuki; Chayama, Kazuhiro; Minamoto, Masahiko; Matsunaga, Katsuya

1999-11-01

Restoration activities after disasters such as landslides or rock avalanches require rapid action, but in fact, in most cases these activities are very inefficient because of the danger of secondary disasters. A system which can operate reconstruction machinery by remote control was therefore developed, and it was installed on general-purpose construction machines (backhoe shovels). Control performance experiments and field experiments on this developed system were carried out, and its effectiveness was confirmed.

Evaluating the Ergonomic Benefit of a Wrist Brace on Wrist Posture, Muscle Activity, Rotational Stiffness, and Peak Shovel-Ground Impact Force During a Simulated Tree-Planting Task.

Science.gov (United States)

Sheahan, Peter J; Cashaback, Joshua G A; Fischer, Steven L

2017-09-01

Background Tree planters are at a high risk for wrist injury due to awkward postures and high wrist loads experienced during each planting cycle, specifically at shovel-ground impact. Wrist joint stiffness provides a measure that integrates postural and loading information. Objective The purpose of this study was to evaluate wrist joint stiffness requirements at the instant of shovel-ground impact during tree planting and determine if a wrist brace could alter muscular contributions to wrist joint stiffness. Method Planters simulated tree planting with and without wearing a brace on their planting arm. Surface electromyography (sEMG) from six forearm muscles and wrist kinematics were collected and used to calculate muscular contributions to joint rotational stiffness about the wrist. Results Wrist joint stiffness increased with brace use, an unanticipated and negative consequence of wearing a brace. As a potential benefit, planters achieved a more neutrally oriented wrist angle about the flexion/extension axis, although a less neutral wrist angle about the ulnar/radial axis was observed. Muscle activity did not change between conditions. Conclusion The joint stiffness analysis, combining kinematic and sEMG information in a biologically relevant manner, revealed clear limitations with the interface between the brace grip and shovel handle that jeopardized the prophylactic benefits of the current brace design. This limitation was not as evident when considering kinematics and sEMG data independently. Application A neuromechanical model (joint rotational stiffness) enhanced our ability to evaluate the brace design relative to kinematic and sEMG parameter-based metrics alone.

Grassland soil tillage by three implements in an Ultisol and its physical and hydropedological implications

Directory of Open Access Journals (Sweden)

Manuel E. Camacho

2015-11-01

Full Text Available A field study was conducted to test the effects of soil tillage with 3 different implements on compaction, physical and hydropedological properties of an Ultisol under cattle production, located in San Mateo, Alajuela. An area of approximately 10 000 m2 was selected and divided into 16 plots (650 m2 each and was tilled with 3 different implements corresponding to the treatments, following an unrestricted random experimental design, with a plot as experimental unit. Soil without tillage (T, tillage by spader plow (PM, tillage by chisel plow (C or tillage by subsoiler (S were established as treatments. Forty days after tillage treatments, soil penetration resistance every 5 cm up to 50 cm deep was assessed, and gravimetric moisture content, bulk and particle density, water infiltration and hydraulic conductivity, all of them up to the first 10 cm deep, all of them were measured. Soil compaction, expressed as soil penetration resistance, was reduced by tillage treatments; the lowest values for soil compaction were found in the spader plow treatment (PM. This same treatment enhanced cumulated infiltration (38.70±3.60 mm at 150 min significantly, comparing with those obtained in T treatment (0.09±0.02 mm at 150 min. No significant differences were found among tillage treatments for bulk density, total porosity and airspace, but comparing with control treatment (T they were found. Subsoiler treatment (S favored the highest values for hydraulic conductivity, but no significant differences with the other treatments were found (p>0.05.

Quantification of the macrofauna in a vertisol under different systems from handling in the Cauca Valley, Colombia

International Nuclear Information System (INIS)

Marin, Elida P; Feijoo, A; Pena, J de J

2001-01-01

Using the tropical soil biology and fertility (TSBF) methodology the biodiversity, the density and biomass of macrofauna was evaluated in a vertisol soil under four tillage systems and in a cocoa plantation with an undisturbed for more than 20 years. Soil under cocoa showed the highest values of biodiversity (47 u.t.) while mulch tiller treatment showed the highest density (122 ind. 0.062 m 2 ) and direct seeding the highest value of biomass (5.44 g. 0.062 m 2 ). Ants, Myriapods and earthworms exhibited greater level of population density (41 +/- 28; 15 +/- 8 and 8 +/- 5 ind. 0.062 m 2 , respectively) while the greatest contribution to biomass was made by earthworms and coleoptera population with 2.3 +/- 1.7 and 0.27 +/- 0.32 g. 0.062 m 2 . Soil under cocoa plantation and direct seeding presented the highest proportion of macrofauna at the top 5 cm (58.2 and 51.1 % respectively) while treatments with soil disturbance as mulch tiller, disk plowing and chisel plow the distribution of macrofauna was between 5 to 20 cm depth (55.8,53.7 and 46.2 %). this study evidenced the sensibility of the soil's macrofauna to different tillage systems. Macrofauna quantifying could be used to evaluate soil conditions under different management methods

Effects of 24 Years of Conservation Tillage Systems on Soil Organic Carbon and Soil Productivity

Directory of Open Access Journals (Sweden)

Kenneth R. Olson

2013-01-01

Full Text Available The 24-year study was conducted in southern Illinois (USA on land similar to that being removed from Conservation Reserve Program (CRP to evaluate the effects of conservation tillage systems on: (1 amount and rates of soil organic carbon (SOC storage and retention, (2 the long-term corn and soybean yields, and (3 maintenance and restoration of soil productivity of previously eroded soils. The no-till (NT plots did store and retain 7.8 Mg C ha−1 more and chisel plow (CP −1.6 Mg C ha−1 less SOC in the soil than moldboard plow (MP during the 24 years. However, no SOC sequestration occurred in the sloping and eroding NT, CP, and MP plots since the SOC level of the plot area was greater at the start of the experiment than at the end. The NT plots actually lost a total of −1.2 Mg C ha−1, the CP lost −9.9 Mg C ha−1, and the MP lost −8.2 Mg C ha−1 during the 24-year study. The long-term productivity of NT compared favorably with that of MP and CP systems.

Salmonella and fecal indicator bacteria in tile waters draining poultry litter application fields in central Iowa

Science.gov (United States)

Hruby, C.; Soupir, M.

2012-12-01

E. coli and enterococci are commonly used as pathogen indicators in surface waters. Along with these indicators, pathogenic Salmonella are prevalent in poultry litter, and have the potential to be transported from land-application areas to tile waters and ultimately to impact waters that are used for drinking-water and recreation. The fate and transport of these bacteria to drainage tiles from application fields, and the correlation of fecal indicator bacteria to pathogens in this setting, is poorly understood. In this field study, samples were obtained from poultry litter, soil, and drainage tile waters below chisel-plowed and no-till cornfields in central Iowa where poultry litter was applied each year in late spring prior to planting. Litter was applied at three different rates; commercial fertilizer with no litter, a low application rate based on the nitrogen requirements of the corn (PL1), and double the low rate (PL2). This site is characterized by low sloping (0-9%) Clarion and Nicollet soils, which are derived from glacial till. Samples were collected from April to September for three years (2010-12) when tiles were flowing. Record high precipitation fell during the sampling period in 2010, while 2011 and 2012 were exceptionally dry years at this location. Grab samples were taken directly from flowing tiles after every rainfall event (>2 cm in less than 24 hours) and samples were collected hourly throughout selected events using an automatic sampling device. Concentrations of E. coli, enterococci and Salmonella spp. were quantified by membrane filtration and growth on selective agars. Peak bacteria concentrations following rainfall events were often one order of magnitude higher in tile waters discharging from no-till plots, despite the smaller size and lower tile flow rates at these plots compared to the chisel-plowed plots. Bacteria concentrations regularly varied by two orders of magnitude in response to rainfall events. Bacteria transport via macropores

Macrophages lift off surface-bound bacteria using a filopodium-lamellipodium hook-and-shovel mechanism.

Science.gov (United States)

Möller, Jens; Lühmann, Tessa; Chabria, Mamta; Hall, Heike; Vogel, Viola

2013-10-07

To clear pathogens from host tissues or biomaterial surfaces, phagocytes have to break the adhesive bacteria-substrate interactions. Here we analysed the mechanobiological process that enables macrophages to lift-off and phagocytose surface-bound Escherichia coli (E. coli). In this opsonin-independent process, macrophage filopodia hold on to the E. coli fimbriae long enough to induce a local protrusion of a lamellipodium. Specific contacts between the macrophage and E. coli are formed via the glycoprotein CD48 on filopodia and the adhesin FimH on type 1 fimbriae (hook). We show that bacterial detachment from surfaces occurrs after a lamellipodium has protruded underneath the bacterium (shovel), thereby breaking the multiple bacterium-surface interactions. After lift-off, the bacterium is engulfed by a phagocytic cup. Force activated catch bonds enable the long-term survival of the filopodium-fimbrium interactions while soluble mannose inhibitors and CD48 antibodies suppress the contact formation and thereby inhibit subsequent E. coli phagocytosis.

Derivation of soil screening thresholds to protect chisel-toothed kangaroo rat from uranium mine waste in northern Arizona

Science.gov (United States)

Hinck, Jo E.; Linder, Greg L.; Otton, James K.; Finger, Susan E.; Little, Edward E.; Tillitt, Donald E.

2013-01-01

Chemical data from soil and weathered waste material samples collected from five uranium mines north of the Grand Canyon (three reclaimed, one mined but not reclaimed, and one never mined) were used in a screening-level risk analysis for the Arizona chisel-toothed kangaroo rat (Dipodomys microps leucotis); risks from radiation exposure were not evaluated. Dietary toxicity reference values were used to estimate soil-screening thresholds presenting risk to kangaroo rats. Sensitivity analyses indicated that body weight critically affected outcomes of exposed-dose calculations; juvenile kangaroo rats were more sensitive to the inorganic constituent toxicities than adult kangaroo rats. Species-specific soil-screening thresholds were derived for arsenic (137 mg/kg), cadmium (16 mg/kg), copper (1,461 mg/kg), lead (1,143 mg/kg), nickel (771 mg/kg), thallium (1.3 mg/kg), uranium (1,513 mg/kg), and zinc (731 mg/kg) using toxicity reference values that incorporate expected chronic field exposures. Inorganic contaminants in soils within and near the mine areas generally posed minimal risk to kangaroo rats. Most exceedances of soil thresholds were for arsenic and thallium and were associated with weathered mine wastes.

Comparative ability of northern pintails, gadwalls, and northern shovelers to metabolize foods

Science.gov (United States)

Miller, M.R.

1984-01-01

Feeding trials were used to compare the ability of northern pintails (Anas acuta), gadwalls (A. strepera), and northern shovelers (A. clypeata) to metabolize energy from a turkey starter ration, alfalfa pellets, and common barnyardgrass (Echinochloa crusgalli) seeds. No differences (P > 0.05) were detected among the three species for any of the three foods (kg body weight/day basis), for dry matter intake (DMI), body weight gain (BWG), apparent metabolizable energy (AME), or metabolized energy (MEE) on any given diet consumed in quantities large enough to promote body weight gain. The AME content of alfalfa was 57% less than the value for turkey starter and 50% less than for barnyardgrass seeds. All three species metabolized more energy and gained weight faster when fed turkey starter. Energy modeling may be facilitated if additional research verifies that all species of dabbling ducks have equal ability to obtain energy from foods available to them in the wild. Behavioral and morphological factors may be more important in defining feeding niches than digestive physiology, at least for the three duck species tested, at the time of year of the experiments, and within the limits of the quality of foods used.

Soil Carbon Changes in Transitional Grain Crop Production Systems in South Dakota

Science.gov (United States)

Woodard, H. J.

2004-12-01

Corn-C (Zea Mays L.), soybean-S (Glycine max L.) and spring wheat-W (Triticum aestivum L.) crops were seeded as a component of either a C-S, S-W, or C-S-W crop rotation on silt-loam textured soils ranging from 3.0-5.0% organic matter. Conservation tillage(chisel plow-field cultivator) was applied to half of the plots. The other plots were direct seeded as a no-till (zero-tillage) treatment. Grain yield and surface crop residues were weighed from each treatment plot. Crop residue (stover and straw) was removed from half of the plots. After four years, soil samples were removed at various increments of depth and soil organic carbon (C) and nitrogen (N) was measured. The ranking of crop residue weights occurred by the order corn>>soybean>wheat. Surface residue accumulation was also greatest with residue treatments that were returned to the plots, those rotations in which maize was a component, and those without tillage. Mean soil organic carbon levels in the 0-7.5cm depth decreased from 3.41% to 3.19% (- 0.22%) with conventional tillage (chisel plow/field cultivator) as compared to a decrease from 3.19% to 3.05% (-0.14%) in plots without tillage over a four year period. Organic carbon in the 0-7.5cm depth decreased from 3.21% to 3.01% (- 0.20%) after residue removed as compared to a decrease from 3.39% to 3.23% (-0.17%) in plots without tillage applied after four years. The soil C:N ratio (0-7.5cm) decreased from 10.63 to 10.37 (-0.26 (unitless)) in the tilled plots over a four-year period. Soil C:N ratio at the 0-7.5cm depth decreased from 10.72 to 10.04 (-0.68) in the no-till plots over a four year period. Differences in the soil C:N ratio comparing residue removed and residue returned were similar (-0.51 vs. -0.43 respectively). These soils are highly buffered for organic carbon changes. Many cropping cycles are required to determine how soil carbon storage is significantly impacted by production systems.

Demanda energética na subsolagem realizada antes e depois de diferentes sistemas de preparo periódico do solo Energy demand in the subsoiling performed before and after different systems of periodic soil tillage

Directory of Open Access Journals (Sweden)

Nilson Salvador

2009-12-01

Full Text Available A subsolagem é uma das operações mecanizadas de elevado custo e demanda energética por área, tradicionalmente utilizada pelos agricultores antes do preparo do solo na descompactação de camadas adensadas. Este trabalho teve como objetivo avaliar a demanda energética na operação de subsolagem realizada antes e depois de diferentes sistemas de preparo periódico num solo classificado como Nitossolo Vermelho Distroférrico. Os sistemas de preparo periódico foram: aração com discos; aração com discos mais uma gradagem de nivelamento; grade aradora; grade aradora mais gradagem de nivelamento e escarificação. O trator utilizado como fonte de potência no experimento foi um Valmet 128 (4x2tda. A demanda energética por área foi menor na subsolagem realizada depois do preparo periódico do solo, proporcionando uma economia de 21,9%. A realização da subsolagem depois do preparo periódico do solo resultou numa diminuição da exigência de força de tração em 21,1% e da potência disponível na barra de tração em 15%.Subsoiling is one of the mechanized operations of high cost and energy demand per area, traditionally utilized by farmers before soil tillage in the decompactation of hardened layers. This research was intended to evaluate the energy demand in the subsoiling operation performed before and after different systems of periodic tillage in a soil classified as Distroferric Red Nitossol. The periodic tillage systems were: plowing with disks; plowing with disks plus one leveling; plowing harrow; plowing harrow plus leveling and chiseling. The tractor utilized as a power source in the experiment was a Valmet 128 (4x2tda. The demand for energy area was lower in subsoiling held after the regular preparation of the soil, providing a saving of 21.9%. The completion of subsoiling after the preparation of the soil resulted in a decrease in demand for power to pull in 21% and 15% of the power available in the bar of traction.

Radiological aspects of choice of a system of cultivation of sod-podzolic sandy loam soils with different degree of humidity on lands of Mogilev region contaminated with 137Cs

International Nuclear Information System (INIS)

Lazarevich, S.S.; Ermolenko, A.V.; Shapsheeva, T.P.

2010-01-01

In the conditions of the Republic of Belarus there were presented data about the influence of technological factors on entry of 137Cs into plant products (grain and green mass). In course of the study there were analyzed the following variants of soil cultivation: moldboard plowing; subsurface chisel soil tillage; subsurface surface soil tillage; minimal tillage. There were presented data on specific activity of 137Cs in plant product samples of oat (Avena sativa) grain; field pea (Pisum arvense L.) and oat mixture grain and green mass; wheat (Triticum aestivum) grain. There were determined the main principles of influence of cultivation systems of sod-podzolic sandy loam soil with different degree of humidity on transition of 137Cs into plants depending on the degree of soil and crop humidity. On the automorphic soil there was revealed a tendency of increased transition of 137Cs into grain and green mass after application of subsurface surface soil tillage system

A Model for Shovel Capital Cost Estimation, Using a Hybrid Model of Multivariate Regression and Neural Networks

Directory of Open Access Journals (Sweden)

Abdolreza Yazdani-Chamzini

2017-12-01

Full Text Available Cost estimation is an essential issue in feasibility studies in civil engineering. Many different methods can be applied to modelling costs. These methods can be divided into several main groups: (1 artificial intelligence, (2 statistical methods, and (3 analytical methods. In this paper, the multivariate regression (MVR method, which is one of the most popular linear models, and the artificial neural network (ANN method, which is widely applied to solving different prediction problems with a high degree of accuracy, have been combined to provide a cost estimate model for a shovel machine. This hybrid methodology is proposed, taking the advantages of MVR and ANN models in linear and nonlinear modelling, respectively. In the proposed model, the unique advantages of the MVR model in linear modelling are used first to recognize the existing linear structure in data, and, then, the ANN for determining nonlinear patterns in preprocessed data is applied. The results with three indices indicate that the proposed model is efficient and capable of increasing the prediction accuracy.

Two new species of shovel-jaw carp Onychostoma (Teleostei: Cyprinidae) from southern Vietnam.

Science.gov (United States)

Hoang, Huy Duc; Pham, Hung Manh; Tran, Ngan Trong

2015-05-22

Two new species of large shovel-jaw carps in the genus Onychostoma are described from the upper Krong No and middle Dong Nai drainages of the Langbiang Plateau in southern Vietnam. These new species are known from streams in montane mixed pine and evergreen forests between 140 and 1112 m. Their populations are isolated in the headwaters of the upper Sre Pok River of the Mekong basin and in the middle of the Dong Nai basin. Both species are differentiated from their congeners by a combination of the following characters: transverse mouth opening width greater than head width, 14-17 predorsal scales, caudal-peduncle length 3.9-4.2 times in SL, no barbels in adults and juveniles, a strong serrated last simple ray of the dorsal fin, and small eye diameter (20.3-21.5% HL). Onychostoma krongnoensis sp. nov. is differentiated from Onychostoma dongnaiensis sp. nov. by body depth (4.0 vs. 3.2 times in SL), predorsal scale number (14-17 vs. 14-15), dorsal-fin length (4.5 vs. 4.2 times in SL), caudal-peduncle length (3.9 vs. 4.2 times in SL), colour in life (dark vs. bright), and by mitochondrial DNA (0.2% sequence divergence). Molecular evidence indicates that both species are members of Onychostoma and are distinct from all congeners sampled (uncorrected sequence divergences at the 16S rRNA gene of >2.0% for all Onychostoma for which homologous 16S rRNA sequences are available).

MANEJO DO SOLO E SUAS RELAÇÕES COM A ACIDEZ E A DISPONIBILIDADE DE MICRONUTRIENTES SOIL AND MICRONUTRIENT ACIDITY AVAILABILITY AS AFFECTED BY SOIL MANAGEMENT

Directory of Open Access Journals (Sweden)

Renato Sérgio Mota dos Santos

2007-09-01

Helena, state of Goiás, Brazil, with soybean, corn, rice and common bean crops under four soil management: 1 no-till; 2 deep moldboard plowing; 3 shallow harrow plowing and 4 deep stirring, using a chiseling plow and three levels of fertilization: 1 Check; 2 State recommendation and 3 Fertilizers to cover the nutrients extracted by grain exportation. The distribution of exchangeable aluminum was influenced by soil management in function of machines and implements demanded by each system. The areas submitted to no-till management presented higher aluminum concentration in the superficial layer after the first crop, but the same was observed in the areas submitted to deep stirring only after the last crop. The areas submitted to shallow harrow plowing showed similar results of those obtained by deep moldboard plowing , even so in smaller degree. In the area where deep moldboard plowing was used, aluminum concentration was similar in all soil layers. Higher pH values were observed on the superficial layer of soil submitted to deep moldboard plowing in relation to no-till shallow harrow plowing and deep stirring. Uniform distribution of iron and manganese was observed in areas submitted to deep moldboard plowing. No variation was observed in relation to fertilizer application.

KEY-WORDS: Soil fertility; micronutrients; no-till; crop systems.

Fractal dimension and geostatistical parameters for soil microrelief as a function of cumulative precipitation Parâmetros fractais e geoestatística do microrrelevo do solo em função de chuva acumulada

Directory of Open Access Journals (Sweden)

Eva Vidal Vázquez

2010-02-01

Full Text Available Surface roughness isinfluenced by type and intensity of soil tillage among other factors, and it changes considerably with rain. In microrelief studies the advantages of using indices such as the fractal dimension, D, and the crossover length, l, is that they allow the partition of the roughness characteristics into properties that depend purely on the scale and on a scale free component, respectively. On the other hand, some geostatistical parameters may provide different ways to understand soil surface variability not addressed with fractal parameters. Changes in fractal dimension and semivariogram parameters for surface roughness evolution were evaluated as a function of cumulative rainfall on Oxisol samples over six tillage treatments, namely, disc harrow, disc plow, chisel plow, disc harrow+disc level, disc plow+disc level and chisel plow+disc level. Measurements were taken in each tillage treatment after rainfall events yielding a total of 48 experimental surfaces measured with a pin microrelief meter. The plot had 135 cm by 135 cm and the sample spacing was 25 mm. Trends due to plot slope component with its concavities and convexities and to agricultural practices were removed from field data sets. A semivariogram model was fitted to each of the surfaces and the model parameters were analyzed and related to the fractal dimension, D, and crossover length, l. A relationship was found between the fractal dimension, D, and semivariogram model parameters. The cross over length, l,did not show as strong relationships with the semivariogram model parameters, even though there was a power relation between D and l.A rugosidade da superfície pode ser influenciada pelo tipo e pela intensidade do preparo do solo entre outros fatores. A vantagem de se usar índices fractais em estudos de microrrelevo é que eles permitem a partição das características da rugosidade em propriedades ou que dependem exclusivamente da escala ou que independem

Correção da acidez do solo em função de modos de incorporação de calcário Correction of soil acidity in function of lime incorporation manners

Directory of Open Access Journals (Sweden)

Pedro Henrique Weirich Neto

2000-04-01

dystrophic Dark Red Latosol, in native field. A randomized complete block design was used, with three replications, in a split-plot experiment. The treatments consisted of five incorporation methods: disk plowing plus two spring disk harrowing, off-set harrowing plus two spring disk harrowing, rotary tilling, chisel plowing plus two spring disk harrowing and lime distribution on the surface without incorporation (main plots, and four rates of dolomitic limestone: 0, 2.8, 6.6 and 10.3 t ha-1, in order to raise base saturation of soil to 30, 60 and 90% (subplots. The cultivated plant was maize. The results showed that the lime incorporation manner in the soil affects its efficiency in relation to the depth in the profile in which there is neutralization of the acidity. There was elevation in base saturation of the soil to the layer of 20cm, 15cm and 10cm, respectively, for the following incorporation manners: rotary tilling, disk plowing or off-set harrowing and chisel plowing or lime distribution on the surface without incorporation. The saturation values for wanted bases were not reached, three months after liming, independent in the incorporation manner of lime.

Rugosidade superficial do solo formada por escarificação e influenciada pela erosividade da chuva Soil surface roughness formed by chiseling and affected by rainfall erosivity

Directory of Open Access Journals (Sweden)

Wilson Antonio Zoldan Junior

2008-02-01

do solo semeadura direta e preparo convencional.Surface soil roughness is affected by many factors, such as the residual effect of the soil management, tillage and rainfall erosivity and, together with the soil cover of crop residues, influences water erosion. The objective of this study was to determine the effects of a chiseling operation, together with rainfall erosivity, on soil surface roughness, from June 2005 to March 2006, in an aluminic Typical Hapludox, under the following soil management systems: bare soil under conventional tillage (BCT, cultivated soil under conventional tillage (CCT, no-tillage in a never-tilled soil with burnt plant residues (BNT, and traditional no-tillage (TNT. The crop sequence in the treatments CCT, BNT and TNT was black oat, soybean, common vetch, corn, black oat, common bean, fodder radish, soybean, common vetch, corn and black oat. Five simulated rain tests were applied, with a constant intensity of 64 mm h-1 and durations of 20, 30, 40, 50, and 60 min each. Natural rains during the experimental period accounted for 57 mm, between the 2nd and 3rd rainfall test; 21 mm, between the 3rd and 4th test; and, 30 mm, between the 4th and 5th test. The surface roughness was determined immediately before and immediately after the chiseling tillage, and immediately after each test of rain simulation. The original and linear soil surface roughness was not influenced by the management, unlike random roughness, at the end of a six-month fallow period. The original, linear and random roughness in different soil management systems was affected by a six-month fallow period, when the soil was subjected to chiseling. Random roughness was less influenced by soil slope than by tillage marks, which decreased with the increasing rainfall erosivity. The coefficient of decay of this kind of soil roughness was similar in the studied soil management systems under no tillage and conventional tillage.

Ultrasonically activated scalpel versus monopolar electrocautery shovel in laparoscopic total mesorectal excision for rectal cancer.

Science.gov (United States)

Zhou, Bao-Jun; Song, Wei-Qing; Yan, Qing-Hui; Cai, Jian-Hui; Wang, Feng-An; Liu, Jin; Zhang, Guo-Jian; Duan, Guo-Qiang; Zhang, Zhan-Xue

2008-07-07

To investigate the feasibility and safety of monopolar electrocautery shovel (ES) in laparoscopic total mesorectal excision (TME) with anal sphincter preservation for rectal cancer in order to reduce the cost of the laparoscopic operation, and to compare ES with the ultrasonically activated scalpel (US). Forty patients with rectal cancer, who underwent laparoscopic TME with anal sphincter preservation from June 2005 to June 2007, were randomly divided into ultrasonic scalpel group and monopolar ES group, prospectively. White blood cells (WBC) were measured before and after operation, operative time, blood loss, pelvic volume of drainage, time of anal exhaust, visual analogue scales (VAS) and surgery-related complications were recorded. All the operations were successful; no one was converted to open procedure. No significant differences were observed in terms of preoperative and postoperative d 1 and d 3 WBC counts (P=0.493, P=0.375, P=0.559), operation time (P=0.235), blood loss (P=0.296), anal exhaust time (P=0.431), pelvic drainage volume and VAS in postoperative d 1 (P=0.431, P=0.426) and d 3 (P=0.844, P=0.617) between ES group and US group. The occurrence of surgery-related complications such as anastomotic leakage and wound infection was the same in the two groups. ES is a safe and feasible tool as same as US used in laparoscopic TME with anal sphincter preservation for rectal cancer on the basis of the skillful laparoscopic technique and the complete understanding of laparoscopic pelvic anatomy. Application of ES can not only reduce the operation costs but also benefit the popularization of laparoscopic operation for rectal cancer patients.

Ultrasonically activated scalpel versus monopolar electrocautery shovel in laparoscopic total mesorectal excision for rectal cancer

Science.gov (United States)

Zhou, Bao-Jun; Song, Wei-Qing; Yan, Qing-Hui; Cai, Jian-Hui; Wang, Feng-An; Liu, Jin; Zhang, Guo-Jian; Duan, Guo-Qiang; Zhang, Zhan-Xue

2008-01-01

AIM: To investigate the feasibility and safety of monopolar electrocautery shovel (ES) in laparoscopic total mesorectal excision (TME) with anal sphincter preservation for rectal cancer in order to reduce the cost of the laparoscopic operation, and to compare ES with the ultrasonically activated scalpel (US). METHODS: Forty patients with rectal cancer, who underwent laparoscopic TME with anal sphincter preservation from June 2005 to June 2007, were randomly divided into ultrasonic scalpel group and monopolar ES group, prospectively. White blood cells (WBC) were measured before and after operation, operative time, blood loss, pelvic volume of drainage, time of anal exhaust, visual analogue scales (VAS) and surgery-related complications were recorded. RESULTS: All the operations were successful; no one was converted to open procedure. No significant differences were observed in terms of preoperative and postoperative d 1 and d 3 WBC counts (P = 0.493, P = 0.375, P = 0.559), operation time (P = 0.235), blood loss (P = 0.296), anal exhaust time (P = 0.431), pelvic drainage volume and VAS in postoperative d 1 (P = 0.431, P = 0.426) and d 3 (P = 0.844, P = 0.617) between ES group and US group. The occurrence of surgery-related complications such as anastomotic leakage and wound infection was the same in the two groups. CONCLUSION: ES is a safe and feasible tool as same as US used in laparoscopic TME with anal sphincter preservation for rectal cancer on the basis of the skillful laparoscopic technique and the complete understanding of laparoscopic pelvic anatomy. Application of ES can not only reduce the operation costs but also benefit the popularization of laparoscopic operation for rectal cancer patients. PMID:18609692

Spatial variability of detrended soil plow layer penetrometer resistance transect in a sugarcane field

Science.gov (United States)

Pérez, Luis D.; Cumbrera, Ramiro; Mato, Juan; Millán, Humberto; Tarquis, Ana M.

2015-04-01

Spatial variability of soil properties is relevant for identifying those zones with physical degradation. In this sense, one has to face the problem of identifying the origin and distribution of spatial variability patterns (Brouder et al., 2001; Millán et al., 2012). The objective of the present work was to quantify the spatial structure of soil penetrometer resistance (PR) collected from a transect data consisted of 221 points equidistant. In each sampling, readings were obtained from 0 cm till 70 cm of depth, with an interval of 5 cm (Pérez, 2012). The study was conducted on a Vertisol (Typic Hapludert) dedicated to sugarcane (Saccharum officinarum L.) production during the last sixty years (Pérez et al., 2010). Recently, scaling approach has been applied on the determination of the scaling data properties (Tarquis et al., 2008; Millán et al., 2012; Pérez, 2012). We focus in the Hurst analysis to characterize the data variability for each depth. Previously a detrended analysis was conducted in order to better study de intrinsic variability of the series. The Hurst exponent (H) for each depth was estimated showing a characteristic pattern and differentiating PR evolution in depth. References Brouder, S., Hofmann, B., Reetz, H.F., 2001. Evaluating spatial variability of soil parameters for input management. Better Crops 85, 8-11. Millán, H; AM Tarquís, Luís D. Pérez, Juan Mato, Mario González-Posada, 2012. Spatial variability patterns of some Vertisol properties at a field scale using standardized data. Soil and Tillage Research, 120, 76-84. Pérez, Luís D. 2012. Influencia de la maquinaria agrícola sobre la variabilidad espacial de la compactación del suelo. Aplicación de la metodología geoestadística-fractal. PhD thesis, UPM (In Spanish). Pérez, Luís D., Humberto Millán, Mario González-Posada 2010. Spatial complexity of soil plow layer penetrometer resistance as influenced by sugarcane harvesting: A prefractal approach. Soil and Tillage

CONCENTRAÇÕES RESIDUAIS DE COBRE, FERRO, MANGANÊS E ZINCO EM LATOSSOLO ROXO EUTRÓFICO SOB DIFERENTES TIPOS DE MANEJO RESIDUAL CONCENTRATION OF COPPER, IRON, MANGANESE AND ZINC IN EUTROPHIC 'LATOSSOLO ROXO’ UNDER DIFFERENT SOIL MANAGEMENTS

Directory of Open Access Journals (Sweden)

Itamar Pereira de Oliveira

2007-09-01

shallow harrow plowing and 4 deep stirring, using a chiseling plower and three level of fertilization: 1 Check (natural soil fertility, 2 Goiás State recommendation and 3 Fertilizers to cover the nutrients extracted by grain exportation. Larger values of the pH were observed in the superficial layer of soil submitted to deep moldboard plowing in relation to no-till, shallow harrow plowing and deep stirring. Uniform distributions of iron, manganese and zinc were observed in areas submitted to deep moldboard plowing. The 40-60 cm layer presented similar concentrations in all types of soil management. Copper tried in the superficial layer and at deepest layers can be explained by the larger concentration of organic matter and origin of the soil. No variation was observed in relation to fertilizers application.

KEY-WORDS: Micronutrients; no till system; cerrado soil.

Analytical and Experimental Draft Force Evaluation of Plastic Coated Chisel Tines

Directory of Open Access Journals (Sweden)

M Barzegar Tabrizi

2017-10-01

Methods Eight tines have been built. Four of them had a thick coating layer of UHMW-PE, and the other four were made of pure mild steel. Each set of the tines have been installed on a four shanked chisel plough chassis and then attached to a tractor. The draft force required for pulling the furrowers attached to the tractor has been measured by a simple load meter mechanism connecting two tractors. Draft force has been measured in two different speeds. Slip ratio of the tractor has been recorded. Each test has been repeated three times.McKyes-Ali’s proposed model for evaluating the draft force of narrow blades has been chosen to predict draft force of the traditional steel furrower tines and the surface coated ones. To drive the model, a computer program has been coded in the script environment of Matlab software. The model required some of the mechanical properties of the soil and the tool to operate. Specific gravity, cohesion and internal friction angle of the soil have been measured by routine laboratory methods. Soil-tool adhesion and friction of the mild steel and the UHMW-PE plates have been measured using the direct shear apparatus. Results and Discussions MkKyes-Ali’s model has predicted draft forces with an accuracy of 90%. According to the results of the driven model, applying a UHMW-PE coating layer to the surface of the tines can improve draft force by 13%. The change of tractor speed from 3.5 km h-1 to 5.5 km h-1 have no significant effect on the predicted draft forces. The model also predicted different angles of the soil failure zone for coated and uncoated tines. On the other hand, the improvement of the draft force for the UHMW-PE coated tine in the field test was about 27%. According to The results obtained from the field test, the draft force of the furrower tines had significant correlation with the speed. Conclusions The UHMW-PE coated tines required significantly less draft force to work in compare with the steel tines. McKyes-Ali’s model

Escarificação mecânica e biológica para a redução da compactação em argissolo franco-arenoso sob plantio direto Mechanical and biological chiseling to reduce compaction of a sandy loam alfisol under no-tillage

Directory of Open Access Journals (Sweden)

S. L. Abreu

2004-06-01

saturado, em médio prazo, a "escarificação biológica" (CM-crot mostrou-se mais eficaz na ruptura da camada compactada e estabelecimento de poros condutores de água do que a escarificação mecânica (Esc-soja do solo. Em contrapartida, se o indicador for a RP, o resultado é inverso. Assim, a propriedade hídrica ou mecânica do solo a ser usada como indicadora para a avaliação da eficácia da ruptura da camada compactada do solo depende do processo físico priorizado: a infiltração e redistribuição de água ou a penetração e crescimento de raízes.Soil management alters the physical soil properties and changes the soil air, water, and solute dynamics. Physical soil properties as affected by conservationist soil management systems were studied in a sandy loam Typic Hapludalf. The treatments were established on a soil that has been under no-tillage for 10 years, and consisted of: no-tillage soybeans, chisel tillage soybeans, reduced tillage Crotalaria, and bare soil without tillage. The evaluated soil properties were soil penetration resistance, bulk density, porosity, pore size distribution, saturated and unsaturated hydraulic conductivity, water infiltration using concentric rings or natural rainfall, variation of the volumetric soil moisture throughout the cropping cycle, and water retention curve. Soil penetration resistance (PR was highest at 0.075 m and 0.175 m depth in no-tillage and chiseled soil, respectively. Soil subsurface mobilization with chiseling and surface mobilization due to disking and sowing did not influence the bulk density (BD after the crop harvest. No-till soil under soybean crop had greater macroporosity than reduced tillage crotalaria and bare soil at 0.02 to 0.05 m depth, resulting in a greater saturated hydraulic conductivity and lower water retention during periods of low water availability. Among the analyzed soil physical-mechanical properties, PR seemed to be more sensitive to detect soil compaction than BD or porosities

Cold, Ice, and Snow Safety (For Parents)

Science.gov (United States)

... to mention a few. Plus, someone has to shovel the snow, right? Once outdoors, however, take precautions ... re going to get the family outside to shovel the snow? Fine, but take care. Snow shoveling ...

Creation of an Aeronautical Capstone Design Project Program at Ohio State University

Science.gov (United States)

2014-12-08

hammering or stomping when inserted into hard grounds. Although this can be done rather easily with a boot or standard issue military shovel , it is...overall performance is the time it takes to make clearance underneath the downed vehicle. Using a “standard issue” shovel , stopwatch, and wooden...took ~5 min to dig the hole seen in Figure 39 above. However, some of that time came from the poor quality of the shovel . The shovel bought at the

75 FR 436 - Notice of Inventory Completion: Thomas Burke Memorial Washington State Museum, University of...

Science.gov (United States)

2010-01-05

... steam shovel crew. The human remains were transferred to the King County Coroner's Office and..., bossing of the cranium, presence of wormian bones, or shovel shaped incisors. Information available in the... bones, or shovel shaped incisors. Information available in the original accession files helped affirm...

Fuzzy boundaries: color and gene flow patterns among parapatric lineages of the western shovel-nosed snake and taxonomic implication.

Science.gov (United States)

Wood, Dustin A; Fisher, Robert N; Vandergast, Amy G

2014-01-01

Accurate delineation of lineage diversity is increasingly important, as species distributions are becoming more reduced and threatened. During the last century, the subspecies category was often used to denote phenotypic variation within a species range and to provide a framework for understanding lineage differentiation, often considered incipient speciation. While this category has largely fallen into disuse, previously recognized subspecies often serve as important units for conservation policy and management when other information is lacking. In this study, we evaluated phenotypic subspecies hypotheses within shovel-nosed snakes on the basis of genetic data and considered how evolutionary processes such as gene flow influenced possible incongruence between phenotypic and genetic patterns. We used both traditional phylogenetic and Bayesian clustering analyses to infer range-wide genetic structure and spatially explicit analyses to detect possible boundary locations of lineage contact. Multilocus analyses supported three historically isolated groups with low to moderate levels of contemporary gene exchange. Genetic data did not support phenotypic subspecies as exclusive groups, and we detected patterns of discordance in areas where three subspecies are presumed to be in contact. Based on genetic and phenotypic evidence, we suggested that species-level diversity is underestimated in this group and we proposed that two species be recognized, Chionactis occipitalis and C. annulata. In addition, we recommend retention of two subspecific designations within C. annulata (C. a. annulata and C. a. klauberi) that reflect regional shifts in both genetic and phenotypic variation within the species. Our results highlight the difficultly in validating taxonomic boundaries within lineages that are evolving under a time-dependent, continuous process.

77 FR 32591 - Procurement List; Proposed Additions

Science.gov (United States)

2012-06-01

... NSN: 5120-00-NIB-0014--Shovel, Round Point, Closed Back, Industrial Grade, 48'' Fiberglass Handle, Cushioned Grip NSN: 5120-00-NIB-0015--Shovel, Round Point, Open Back, Industrial Grade, 48'' Fiberglass Handle, Cushioned Grip NSN: 5120-00-NIB-0016--Shovel, Round Point, Open Back, Industrial Grade, 29...

77 FR 44218 - Procurement List; Additions

Science.gov (United States)

2012-07-27

..., Fiberglass Handle NSN: 5120-00-NIB-0014--Shovel, Round Point, Closed Back, Industrial Grade, 48'' Fiberglass Handle, Cushioned Grip NSN: 5120-00-NIB-0015--Shovel, Round Point, Open Back, Industrial Grade, 48'' Fiberglass Handle, Cushioned Grip NSN: 5120-00-NIB-0016--Shovel, Round Point, Open Back, Industrial Grade, 29...

Hoist motor replacements. Help slash downtime, unplanned outages

Energy Technology Data Exchange (ETDEWEB)

Elliott, J.

2004-11-01

The article describes the design and retrofitting of a 'Dynamic Field Control' system to a P & H 4100 shovel. Designed by Drives and Controls Services Inc., this is a control system operated with a programmable logic control that enhances the performance of the hoist motor on the shovel. Flanders Electric Motor Service fitted prototype M22 motors with these control to P & H 4100 shovels in February 2001. Since then they have been retrofitted successfully to other shovels, in operation in India and Australia. 4 figs.

Nutrient and Organic Carbon Losses, Enrichment Rate, and Cost of Water Erosion

Directory of Open Access Journals (Sweden)

Ildegardis Bertol

Full Text Available ABSTRACT Soil erosion from water causes loss of nutrients and organic carbon, enriches the environment outside the erosion site, and results in costs. The no-tillage system generates increased nutrient and C content in the topsoil and, although it controls erosion, it can produce a more enriched runoff than in the conventional tillage system. This study was conducted in a Humic Cambisol in natural rainfall from 1997 to 2012 to quantify the contents and total losses of nutrients and organic C in soil runoff, and to calculate the enrichment rates and the cost of these losses. The treatments evaluated were: a soil with a crop, consisting of conventional tillage with one plowing + two harrowings (CT, minimum tillage with one chisel plowing + one harrowing (MT, and no tillage (NT; and b bare soil: one plowing + two harrowings (BS. In CT, MT, and NT, black oat, soybean, vetch, corn, turnip, and black beans were cultivated. Over the 15 years, 15.5 Mg ha-1 of limestone, 525 kg ha-1 of N (urea, 1,302 kg ha-1 of P2O5 (triple superphosphate, and 1,075 kg ha-1 of K2O (potassium chloride were used in the soil. The P, K, Ca, Mg, and organic C contents in the soil were determined and also the P, K, Ca, and Mg sediments in the runoff water. From these contents, the total losses, the enrichment rates (ER, and financial losses were calculated. The NT increased the P, K, and organic C contents in the topsoil. The nutrients and organic C content in the runoff from NT was greater than from CT, showing that NT was not a fully conservationist practice for soil. The linear model y = a + bx fit the data within the level of significance (p≤0.01 when the values of P, K, and organic C in the sediments from erosion were related to those values in the soil surface layer. The nutrient and organic C contents were higher in the sediments from erosion than in the soil where the erosion originated, generating values of ER>1 for P, K, and organic C. The value of the total losses

Constructing Hardware in a Scale Embedded Language

Energy Technology Data Exchange (ETDEWEB)

2014-08-21

Chisel is a new open-source hardware construction language developed at UC Berkeley that supports advanced hardware design using highly parameterized generators and layered domain-specific hardware languages. Chisel is embedded in the Scala programming language, which raises the level of hardware design abstraction by providing concepts including object orientation, functional programming, parameterized types, and type inference. From the same source, Chisel can generate a high-speed C++-based cycle-accurate software simulator, or low-level Verilog designed to pass on to standard ASIC or FPGA tools for synthesis and place and route.

Fuzzy boundaries: color and gene flow patterns among parapatric lineages of the western shovel-nosed snake and taxonomic implication.

Directory of Open Access Journals (Sweden)

Dustin A Wood

Full Text Available Accurate delineation of lineage diversity is increasingly important, as species distributions are becoming more reduced and threatened. During the last century, the subspecies category was often used to denote phenotypic variation within a species range and to provide a framework for understanding lineage differentiation, often considered incipient speciation. While this category has largely fallen into disuse, previously recognized subspecies often serve as important units for conservation policy and management when other information is lacking. In this study, we evaluated phenotypic subspecies hypotheses within shovel-nosed snakes on the basis of genetic data and considered how evolutionary processes such as gene flow influenced possible incongruence between phenotypic and genetic patterns. We used both traditional phylogenetic and Bayesian clustering analyses to infer range-wide genetic structure and spatially explicit analyses to detect possible boundary locations of lineage contact. Multilocus analyses supported three historically isolated groups with low to moderate levels of contemporary gene exchange. Genetic data did not support phenotypic subspecies as exclusive groups, and we detected patterns of discordance in areas where three subspecies are presumed to be in contact. Based on genetic and phenotypic evidence, we suggested that species-level diversity is underestimated in this group and we proposed that two species be recognized, Chionactis occipitalis and C. annulata. In addition, we recommend retention of two subspecific designations within C. annulata (C. a. annulata and C. a. klauberi that reflect regional shifts in both genetic and phenotypic variation within the species. Our results highlight the difficultly in validating taxonomic boundaries within lineages that are evolving under a time-dependent, continuous process.

Resistência à penetração e rendimento da soja após intervenção mecânica em latossolo vermelho sob plantio direto Penetration resistance and soybean yield after mechanical intervention on an oxisol under tillage

Directory of Open Access Journals (Sweden)

Marta Sandra Drescher

2012-12-01

íveis alocados na subparcela foram constituídos pela ação de uma semeadora de plantio direto equipada com discos duplos defasados atuando até 7 cm de profundidade e de uma semeadora equipada com discos duplos + haste atuando até 13 cm de profundidade. Os resultados obtidos indicaram que a intervenção mecânica em solo manejado sob SPD consolidado, mediante a prática de escarificação ou aração do solo, apresenta potencial efêmero para mitigar a compactação e promover a melhoria da estrutura do solo, com efeito residual de até dois anos e meio para a resistência do solo à penetração. A utilização de semeadora de plantio direto equipada com sulcador tipo haste + disco apresentou potencial para mitigação da compactação do solo, promovendo a redução da resistência mecânica do solo à penetração na camada de 7 - 15 cm de profundidade. Contudo, o efeito residual da intervenção mecânica para descompactação do solo e a adoção dos diferentes dispositivos de aplicação do adubo no sulco de semeadura não foram eficientes em alterar o rendimento de grãos da cultura da soja na safra agrícola 2008/2009.Compaction negatively affects a number of soil properties, e.g., resistance to root penetration and water and nutrient availability to plants, restricting the photosynthetic rate, shoot growth and consequently, the yield. When soil compaction becomes limiting to crop development, mitigation measures must be adopted. The purpose of this study was to evaluate the residual effect of mechanical soil plowing and chiseling, by a seeder with soil breakers (disks and disks plus short ripper as mitigation practice of the soil compaction under no-tillage (NT, on soil penetration resistance and soybean yield. In 2001, a study was conducted in Coxilha, in northern Rio Grande do Sul, on an Oxisol, in an area with a sequence of NT management. In this field, every year a treatment of mechanical soil decompression was applied, consisting of plowing and chiseling the

75 FR 10258 - Notice of a Project Waiver of Section 1605: (Buy American Requirement) of the American Recovery...

Science.gov (United States)

2010-03-05

... recovery by funding current infrastructure construction, not to delay shovel ready projects by requiring... would result in unreasonable delay and thus displace the ``shovel ready'' status for this project...

75 FR 66375 - Notice of a Regional Waiver of Section 1605 (Buy American Requirement) of the American Recovery...

Science.gov (United States)

2010-10-28

... recovery by funding current infrastructure construction, not to delay projects that are already shovel... for DWSRF assistance would result in unreasonable delay and thus displace the ``shovel ready'' status...

76 FR 80369 - Notice of a Regional Project Waiver of Section 1605 (Buy American) of the American Recovery and...

Science.gov (United States)

2011-12-23

... funding current infrastructure construction, not to delay projects that are ``shovel ready'' by requiring... unreasonable delay and thus displace the ``shovel ready'' status for this project. To further delay...

76 FR 6614 - Notice of a Regional Waiver of Section 1605 (Buy American Requirement) of the American Recovery...

Science.gov (United States)

2011-02-07

... current infrastructure construction, not to delay projects that are already shovel ready by requiring... would result in unreasonable delay and thus displace the ``shovel ready'' status for this project. To...

77 FR 5516 - Notice of a Project Waiver of the American Recovery and Reinvestment Act of 2009 (ARRA) to the...

Science.gov (United States)

2012-02-03

... funding current infrastructure construction, not to delay projects that are ``shovel ready'' by requiring... result in unreasonable delay and thus displace the ``shovel ready'' status for this project. To further...

77 FR 25408 - Takes of Marine Mammals Incidental to Specified Activities; Taking Marine Mammals Incidental to a...

Science.gov (United States)

2012-04-30

... forward stroke the piston strikes the end of the chisel, reciprocating at a rate such that the chisel edge... associated with sound waves are detected as changes in pressure by aquatic life and man-made sound receptors... haul-out sites in Alaska, California, and Oregon, and includes so-called `aquatic zones' that extend 3...

76 FR 41495 - Notice of a Regional Waiver of Section 1605 (Buy American Requirement) of the American Recovery...

Science.gov (United States)

2011-07-14

... infrastructure construction, not to delay projects that are already shovel ready by requiring entities, like the... unreasonable delay and thus displace the ``shovel ready'' status for this project. To further delay...

75 FR 5588 - Notice of a Regional Waiver of Section 1605 (Buy American Requirement) of the American Recovery...

Science.gov (United States)

2010-02-03

... infrastructure construction, not to delay projects that are already shovel ready by requiring entities, like the... unreasonable delay and thus displace the ``shovel ready'' status for this project. To further delay...

76 FR 2684 - Notice of a Project Waiver of Section 1605 (Buy American Requirement) of the American Recovery...

Science.gov (United States)

2011-01-14

... construction, not to delay shovel ready projects by requiring entities, like Lake County, to revise their... thus displace the ``shovel ready'' status for this project. Further delay of this project would...

76 FR 2683 - Notice of a Project Waiver of Section 1605: (Buy American Requirement) of the American Recovery...

Science.gov (United States)

2011-01-14

... to delay shovel ready projects by requiring entities, like the IEUA, to revise their design and... the ``shovel ready'' status for this project. Further delay of this project would contravene the most...

75 FR 32179 - Notice of a Regional Waiver of Section 1605 (Buy American Requirement) of the American Recovery...

Science.gov (United States)

2010-06-07

... shovel ready by requiring entities, like the City, to revise their design or potentially choose a more... eligible for DWSRF assistance would result in unreasonable delay and thus displace the ``shovel ready...

76 FR 18218 - Notice of a Project Waiver of Section 1605 (Buy American Requirement) of the American Recovery...

Science.gov (United States)

2011-04-01

... delay projects that are ``shovel ready'' by requiring cities such as Salt Lake City to revise their... unreasonable delay and thus displace the ``shovel ready'' status for this project. To further delay project...

76 FR 14069 - Notice of Inventory Completion: Office of the State Archaeologist, Michigan Historical Center...

Science.gov (United States)

2011-03-15

... State University, examined the remains and found that some of the teeth were shovel- shaped incisors. In... practices, types of funerary objects, and the shovel-shaped incisors are all indicative of Native American...

Seasonal dynamics of CO2 efflux in soils amended with composted and thermally-dried sludge as affected by soil tillage systems in a semi-arid agroecosystem

Science.gov (United States)

García-Gil, Juan Carlos; Soler-Rovira, Pedro; López-de-Sa, Esther G.; Polo, Alfredo

2014-05-01

In semi-arid agricultural soils, seasonal dynamic of soil CO2 efflux (SCE) is highly variable. Based on soil respiration measurements the effects of different management systems (moldboard plowing, chisel and no-tillage) and the application of composted sludge (CS) and thermally-dried sewage sludge (TSS) was investigated in a long-term field experiment (28 years) conducted on a sandy-loam soil at the experimental station 'La Higueruela' (40o 03'N, 4o 24'W). Both organic amendments were applied at a rate of 30 Mg ha-1 prior to tillage practices. Unamended soils were used as control for each tillage system. SCE was moderate in late spring (2.2-11.8 μmol CO2 m-2 s-1) when amendments were applied and tillage was performed, markedly decreased in summer (0.4-3.2 μmol CO2 m-2 s-1), following a moderate increase in autumn (3.4-14.1 μmol CO2 m-2 s-1), rising sharply in October (5.6-39.8 μmol CO2 m-2 s-1 ). In winter, SCE was low (0.6-6.5 μmol CO2 m-2 s-1). In general, SCE was greater in chisel and moldboard tilled soils, and in CS and particularly TSS-amended soils, due to the addition of labile C with these amendments, meanwhile no-tillage soils exhibited smaller increases in C efflux throughout the seasons. Soil temperature controlled the seasonal variations of SCE. In summer, when drought occurs, a general decrease of SCE was observed due to a deficit in soil water content. After drought period SCE jumped to high values in response to rain events ('Birch effect') that changed soil moisture conditions. Soil drying in summer and rewetting in autumn may promotes some changes on the structure of soil microbial community, affecting associated metabolic processes, and enhancing a rapid mineralization of water-soluble organic C compounds and/or dead microbial biomass that acts as an energy source for soil microorganisms. To assess the effects of tillage and amendments on SCE, Q10 values were calculated. Data were grouped into three groups according to soil moisture (0

Soil and crop residue CO2-C emission under tillage systems in sugarcane-producing areas of southern Brazil

Directory of Open Access Journals (Sweden)

Luís Gustavo Teixeira

2013-10-01

Full Text Available Appropriate management of agricultural crop residues could result in increases on soil organic carbon (SOC and help to mitigate gas effect. To distinguish the contributions of SOC and sugarcane (Saccharum spp. residues to the short-term CO2-C loss, we studied the influence of several tillage systems: heavy offset disk harrow (HO, chisel plow (CP, rotary tiller (RT, and sugarcane mill tiller (SM in 2008, and CP, RT, SM, moldboard (MP, and subsoiler (SUB in 2009, with and without sugarcane residues relative to no-till (NT in the sugarcane producing region of Brazil. Soil CO2-C emissions were measured daily for two weeks after tillage using portable soil respiration systems. Daily CO2-C emissions declined after tillage regardless of tillage system. In 2008, total CO2-C from SOC and/or residue decomposition was greater for RT and lowest for CP. In 2009, emission was greatest for MP and CP with residues, and smallest for NT. SOC and residue contributed 47 % and 41 %, respectively, to total CO2-C emissions. Regarding the estimated emissions from sugarcane residue and SOC decomposition within the measurement period, CO2-C factor was similar to sugarcane residue and soil organic carbon decomposition, depending on the tillage system applied. Our approach may define new emission factors that are associated to tillage operations on bare or sugarcane-residue-covered soils to estimate the total carbon loss.

Contenders ready!

Energy Technology Data Exchange (ETDEWEB)

NONE

2008-09-15

When it comes to truck and shovel surface mining, trying to figure out which equipment to plump for can be a difficult. This paper deals with advantages and disadvantages of the shovel and the excavator.

To the question on vibration strength of the main circulating pumps of reactor WWER-1000 at influence of the non-stationary hydrodynamic stream

International Nuclear Information System (INIS)

Pukhlij, V.A.

2015-01-01

The problem of vibration strength of working shovels of centrifugal pumps is based on definition of dynamic behaviour of shovels on the basis of the theory of flat covers, thus integration of the initial equations of movement is carried out by the modified method consecutive approach. The problem of forced and natural fluctuations of a shovel is solved, which makes it possible to identify the resonant zones of operation of centrifugal pumps of nuclear power, in particular, the main circulation pump GTSN 195M [ru

The DB Site. An Archaeological Site at Fort Leavenworth, Kansas

National Research Council Canada - National Science Library

1996-01-01

.... If the ground cover is too dense to see the surface, they perform shovel tests. A shovelful of earth is scooped out at constant intervals along the survey route and checked to see if it contains artifacts...

A SOLUÇÃO DO SOLO DE UM LATOSSOLO VERMELHO DISTRÓFICO SUBMETIDO A TRÊS TIPOS DE MANEJO DE SOLO E DE CULTURAS

Directory of Open Access Journals (Sweden)

Silvio Tulio Spera

2014-06-01

-tillage (PD, minimum cultivation with chisel plow (PM and conventional plowing with disk plow (PC. These were combined with crop rotations: wheat-soybean (R1; wheat-soybean/common vetch-sorghum (R2 and wheat-soybean/common vetch-sorghum/white oats-soybean (R3, to assess the interaction effect of these rotations with the type of soil management in the chemical attributes of soil solution in layers of 0 to 6.7 cm and 6.8 to 20 cm. There were no correlations between the soil attributes evaluated on both layers, even when differences in levels of chemical and physical constraint between the layers. Chemical attributes of soil solution were not influenced by the interaction of the studied factors, being slightly influenced by crop rotation. The no-till provided the greatest values of dissolved organic carbon and Al lowest level and activity in soil solution, promoting the Al toxicity. Keywords: soil nutrients; no-till, soil plowing, soil chemistry.DOI: http://dx.doi.org/10.14583/2318-7670.v02n02a01 

Achieving the projected capacity of the Stanyantsi mine

Energy Technology Data Exchange (ETDEWEB)

Dragiev, D

1979-07-01

Equipment includes 2 Skoda excavators, one Skoda E-25 power shovel, KraZ dump trucks, graders and S-100 bulldozers. The annual production of 700,000 tons is consumed by the Maritsa-Iztok 2 power plant. To increase production and eventually achieve the originally projected output of 1,400,000 tons annually it is necessary to procure an ESh-10/70 power shovel for surface work, employ all available excavating equipment in surface mining and complete an estimate of all needed mining equipment. The new exploitation plan calls for a reorganization of surface levels, realignment of surface drainage, arrangements for employment of two conveyor belts, construction of a service base for the ESh-10/70 power shovel, training of operators and maintenance crews for the ESh-10/70 power shovel, installation of new electric lines and substations and resurfacing access roads with gravel.

Analysis of the impact of chest wall constraints on eligibility for a randomized trial of stereotactic body radiotherapy of peripheral stage 1 non-small cell lung cancer

International Nuclear Information System (INIS)

Siva, Shankar; Shaw, Mark; Gill, Suki; David, Ball; Chesson, Brent

2012-01-01

Chest wall toxicities are recognized complications of stereotactic radiotherapy (SBRT) in non-small cell lung cancer. To minimize toxicity, the Trans-Tasman Radiation Oncology Group (TROG) 09.02 ‘CHISEL’ study protocol excluded patients with tumours within 1cm of the chest wall. The purpose of this study is to evaluate the implication of chest wall proximity constraints on patient eligibility, toxicity and potential accrual. Exclusion zones of 1cm beyond the mediastinum and 2cm beyond the bifurcation of the lobar bronchi were incorporated into the CHISEL credentialing CT dataset. Volumes of lung within which tumours varying from 1cm to 5cm in diameter may occupy and remain eligible for the CHISEL study were calculated. These volumes were compared to a hypothetical model in which the 1cm chest wall proximity restriction was removed. The percentage of lung area in which a tumour mass can occupy and be suitable for CHISEL in the left and right lung were 54% and 60% respectively. Removing the constraint increased the percentage of available lung to 83% and 87% respectively. Considering a 2cm spherical tumour, only 21% and 31% of tumours in the left and right lung would be eligible with the chest wall constraint, whilst 39% and 50% respectively would be eligible without the constraint. The exclusion of tumours less than 1cm to chest wall significantly reduces the proportion of patients eligible for the CHISEL protocol. A review of the literature pertaining to chest wall toxicity after stereotactic radiotherapy supports a change in chest wall exclusion criteria for the CHISEL study.

Extreme Cold: A Prevention Guide to Promote Your Personal Health and Safety

Science.gov (United States)

... watch • extra batteries • non-electric can opener • snow shovel • rock salt • special needs items (diapers, hearing aid ... waterproof with heavy snow) matches (to melt • collapsible shovel snow for water) • container of water • windshield scraper ...

The retina of the shovel-nosed ray, Rhinobatos batillum (Rhinobatidae): morphology and quantitative analysis of the ganglion, amacrine and bipolar cell populations.

Science.gov (United States)

Collin, S P

1988-01-01

A light microscopy study of the retina of the shovel-nosed ray, Rhinobatos batillum (Rhinobatidae) has revealed a duplex retina with a rod to cone ratio between 4:1 and 6:1. The inner nuclear layer consists of three layers of large horizontal cells, tightly packed, stellate bipolar cells, and up to three substrata of amacrine cells. The collaterals of the many supporting Müller cells project from the inner to the outer limiting membrane and divide the retina into many subunits. The cells of the ganglion cell layer are distributed into two layers, although a large proportion of ganglion cells are also displaced into the inner plexiform and inner nuclear layers. Topographic analysis of the cells in the ganglion cell layer, inner plexiform and inner nuclear layers reveals a number of regional specializations or "areae centrales". Ganglion cells were retrogradely-labelled with cobalt-lysine from the optic nerve, and three sub-populations of neurons characterized on their soma size and position. Small (20-50 microns2), large (80-300 microns2) and giant (greater than 300 microns2) sub-populations of ganglion cells each revealed distinct retinal specializations with peak densities of 3 x 10(3), 1.25 x 10(3) and 1.57 x 10(3) cells per mm2, respectively. Topographical comparison between Nissl-stained and retrogradely-labelled ganglion cell populations have established that a maximum of 20% in the "area centralis", and 75% in unspecialized, peripheral regions of the retina are non-ganglion cells. Out of a total of 210,566 cells in the ganglion cell layer, 49% were found to be non-ganglion cells. Iso-density contour maps of amacrine and bipolar cell distributions also reveal some specializations. These cell concentrations lie in corresponding regions to areas of increased density in the large and giant ganglion cell populations, suggesting some functional association.

Divergence and gene flow in the globally distributed blue-winged ducks

Science.gov (United States)

Nelson, Joel; Wilson, Robert E.; McCracken, Kevin G.; Cumming, Graeme; Joseph, Leo; Guay, Patrick-Jean; Peters, Jeffrey

2017-01-01

The ability to disperse over long distances can result in a high propensity for colonizing new geographic regions, including uninhabited continents, and lead to lineage diversification via allopatric speciation. However, high vagility can also result in gene flow between otherwise allopatric populations, and in some cases, parapatric or divergence-with-gene-flow models might be more applicable to widely distributed lineages. Here, we use five nuclear introns and the mitochondrial control region along with Bayesian models of isolation with migration to examine divergence, gene flow, and phylogenetic relationships within a cosmopolitan lineage comprising six species, the blue-winged ducks (genus Anas), which inhabit all continents except Antarctica. We found two primary sub-lineages, the globally-distributed shoveler group and the New World blue-winged/cinnamon teal group. The blue-winged/cinnamon sub-lineage is composed of sister taxa from North America and South America, and taxa with parapatric distributions are characterized by low to moderate levels of gene flow. In contrast, our data support strict allopatry for most comparisons within the shovelers. However, we found evidence of gene flow from the migratory, Holarctic northern shoveler (A. clypeata) and the more sedentary, African Cape shoveler (A. smithii) into the Australasian shoveler (A. rhynchotis), although we could not reject strict allopatry. Given the diverse mechanisms of speciation within this complex, the shovelers and blue-winged/cinnamon teals can serve as an effective model system for examining how the genome diverges under different evolutionary processes and how genetic variation is partitioned among highly dispersive taxa.

Illinois reclaimed soil productivity: Restoration techniques

International Nuclear Information System (INIS)

Smout, G.

1998-01-01

Consolidation Coal Co. (Consol) has nearly 8,000 acres of high capability and prime farmland reclamation responsibility in Illinois. It has been involved in research in the area of restored soil productivity since 1976 with the University of Illinois and Southern Illinois University, Carbondale. Consol maintains an intensive program to demonstrate and test deep tillage equipment. The research and in-house demonstrations identified soil physical strength (compaction) as the main limiting factor to restoring a soil's productive capacity. There are two primary ways to address this issue, prevention and amelioration. The former was not an option for Consol because many acres were already reclaimed and the company had a major scraper fleet. Along with other operators in Illinois, Consol started an aggressive search for equipment and techniques that could loosen compacted soils. In 1987 Consol was the first to use the D.M.I.-Super Tiger deep soil plow, originally developed and manufactured by D.M.I., Inc. of Goodfield, Illinois. This plow is composed of a single parabolic, static shank with a 44-inch wide sweep weighing 1,200 pounds. It is capable of plowing 48 inches deep while leaving the top soil in place. A Caterpillar D9L tractor with 460 horsepower is used to pull the plow. In 1990 the decision was made to commit to this equipment as the best technology currently available. In 1994 Consol received a patent waiver from D.M.I. to build its own plow. The Consol built plow has been in use since the summer of 1995. To date, Consol has plowed over 3,900 acres with a D.M.I. plow

MAIZE YIELD AND ITS STABILITY AS AFFECTED BY TILLAGE AND CROP RESIDUE MANAGEMENT IN THE EASTERN ROMANIAN DANUBE PLAIN

Directory of Open Access Journals (Sweden)

Alexandru COCIU

2015-10-01

Full Text Available Rainfed crop management systems need to be optimized to provide more resilient options in order to cope with projected climatic scenarios which are forecasting a decrease in mean precipitation and more frequent extreme drought periods in the Eastern Romanian Danube Plain. This research, carried out in the period of 2011-2014, had as main purpose the determination of influence of tillage practices and residue management on rainfall use efficiency, maize yield and its stability, in order to evaluate the advantages of conservation agriculture (CA in the time of stabilization of direct seeding effects, in comparison with traditional chisel tillage. The maize grain yields are presented for each crop management practices, as follows: (1 chisel tillage, retained crop residues being chopped and incorporated (ciz; (2 zero tillage, retained crop residue chopped and kept on the field in short flat condition (rvt; (3 zero tillage, crop residues kept on the field in short root-anchored condition (1/2rva, and (4 zero tillage, crop residues kept on the field in tall root-anchored condition (1/1rva. In 2012, a year with prolonged drought during vegetative growth, yield differences between zero tillage with short root-anchored residue retention (1/2rva and chisel tillage with residue incorporation (ciz were positive, up to 840 kg ha-1. In average over 2011-2014, conservation agriculture (CA practices had a yield advantage over traditional chisel tillage practice. Zero tillage with residue retention used rainfall more efficiently so suggesting that it is a more resilient agronomic system than traditional (conventional practices involving chisel tillage with residue incorporation.

Failure rate and reliability of the KOMATSU hydraulic excavator in surface limestone mine

Science.gov (United States)

Harish Kumar N., S.; Choudhary, R. P.; Murthy, Ch. S. N.

2018-04-01

The model with failure rate function of bathtub-shaped is helpful in reliability analysis of any system and particularly in reliability associated privative maintenance. The usual Weibull distribution is, however, not capable to model the complete lifecycle of the any with a bathtub-shaped failure rate function. In this paper, failure rate and reliability analysis of the KOMATSU hydraulic excavator/shovel in surface mine is presented and also to improve the reliability and decrease the failure rate of each subsystem of the shovel based on the preventive maintenance. The model of the bathtub-shaped for shovel can also be seen as a simplification of the Weibull distribution.

White Flame Energy switches to backhoes

Energy Technology Data Exchange (ETDEWEB)

Fiscor, S.

2005-06-01

The mountaintop coal operator, White Flame Energy has switched to different truck-shovel arrangement. Along with many surface mining operations throughout central Appalachia, the company is using hoe-configured hydraulic excavators as opposed to the traditional front-shovel arrangements. Located in Varney, WV, White Flame Energy uses two Terex O & K mining shovels, an RH170 and an RH 200, which have the capacity to move 2 million cu yards per month from five seams, primarily the Coalburg, Stockton, and No 5 Block and associated rider seams. The article records conversations on the operations with Mike Vines, the general manager, and Don Nicewonder, the owner of White Flame Energy. 2 photos.

Preferential flow dynamics in agricultural soils in Navarre (Spain): an experimental approach to gain insight into water connectivity

Science.gov (United States)

Iturria, Iban; Zubieta, Elena; Giménez, Rafael; Ángel Campo-Bescós, Miguel

2017-04-01

obtained. From these, binary images were obtained: soil matrix vs macropores/cracks. Statistical analysis was performed to characterize the macropore/crack distribution pattern. First results indicated clear differences between the different tillage in the crack/macropores distribution. For example, in treatments in which the mouldboard plough was used, (i and iii), a greater presence of macropores was observed in the upper 20 cm. However, with the treatment with chisel (ii), macropores were evident in the whole soil profile; this was due to the chisel making cracks in the plow sole thus promoting water flow. Also, this pattern was affected by rainfall (and therefore in soil moisture) but information is still scarce for any greater precisions. The extrapolation of these results would serve, for instance to (i) gain a better understanding of water movement and its connectivity in the soil and, thus, of the hydrological behaviour of typical agrarian catchments in Navarre; (ii) to improve the performance of hydrological models for land management, and (iii) optimize irrigation design and soil management practices. Reference Lu, J., Wu, L. 2003. Visualizing bromide and iodide water tracer in soil profiles by spray methods. Journal of Environmental Quality 32(1): 363-367

Residue management practices and planter attachments for corn production in a conservation agriculture system

Directory of Open Access Journals (Sweden)

J. Nejadi

2013-11-01

Full Text Available Seed placement and failure to establish a uniform plant stand are critical problems associated with production of corn (Zea mays following wheat (Triticum aestivum in a conservation agriculture system in Iran. Our objectives were to evaluate the performance of a corn row- crop planter equipped with two planter attachments (smooth/toothed coulters at six wheat residue management systems (three tillage systems and two levels of surface residue at two forward speeds of 5 and 7 km h-1. Residue retained after planting, seeding depth, emergence rate index (ERI and seed spacing indices were determined. The baled residue plots tilled by chisel plow followed by disc harrow (BRCD resulted in minimum residue after planting as compared to other residue treatments. Furthermore, the maximum values of the ERI and uniformity of plant spacing pertained to this treatment. Other results showed that the ERI increased up to 18% for the toothed coulter as compared to the smooth coulter. The toothed coulter also established a deeper seed placement as compared to the smooth coulter. Planting at forward speed of 5 km h-1 resulted in deeper seeding depth as compared to a forward speed of 7 km h-1. However, lower values of miss and precision indices were obtained at forward speed of 7 km h-1, indicating a more uniformity of plant spacing. Results of this study showed that equipping the conventional planter with toothed coulter and planting in soil prepared under the BRCD residue management system can result in a satisfactory conservation crop production system.

Technical and financial management of the fleet of vehicles of an opencast mining operation

Energy Technology Data Exchange (ETDEWEB)

Laversanne, J.

1988-05-01

The collieries of the Centre and Midi coalfield are equipped conventionally with shovels, wheeled loaders, dumpers and bulldozers. In 1986/87 the new strip mine of Carmaux was begun with its mixed extraction, using bucket wheel excavators for the Tertiary overburden and shovels and dumpers for the coal. 2 refs., 3 figs., 1 tab.

Feeding ecology of waterfowl wintering on evaporation ponds in California

Science.gov (United States)

Euliss, N.H.; Jarvis, R.L.; Gilmer, D.S.

1991-01-01

We examined the feeding ecology of Northern Pintails (Anas acuta), Northern Shovelers (A. clypeata), and Ruddy Ducks (Oxyura jamaicensis) wintering on drainwater evaporation ponds in California from 1982 through 1984. Pintails primarily consumed midges (Chironomidae) (39.3%) and widegeongrass (Ruppia maritima) nutlets (34.6%). Shovelers and Ruddy Ducks consumed 92.5% and 90.1% animal matter, respectively. Water boatmen (Corixidae) (51.6%), rotifers (Rotatoria) (20.4%), and copepods (Copepoda) (15.2%) were the most important Shoveler foods, and midges (49.7%) and water boatmen (36.0%) were the most important foods of Ruddy Ducks. All three species were opportunistic foragers, shifting their diets seasonally to the most abundant foods given their behavioral and morphological attributes.

The essence of excavators

Energy Technology Data Exchange (ETDEWEB)

NONE

2007-07-01

Competition is hotting-up between rope shovel and hydraulic excavator manufacturers as demand mounts for surface loading equipment. The article gives an overview of major players and gives details of their popular models of excavators and rope shovels. It compares surface loading equipment from P & H, Bucyrus, THYI, OMZ, Komatsu, Hirachi, O & K and Liebherr. 4 tabs., 3 photos.

Major savings promised by new dipper technology

Energy Technology Data Exchange (ETDEWEB)

Ednie, H.

2005-10-01

A Canadian rope shovel dipper prototype was tested at the Suncor oil sands operations in May 2005. The 3 cubic yard JPi 2005 series dipper was designed by JPi, a geo-industry engineering consultant firm. The new design minimizes shovel dipper wear and resistance while digging at a rock face. This simple concept could offer major savings for mine operators. The main feature of the shovel dipper is its shape. Rather than having a straight-lined profile, the lip to latch keeper is curved to match the range of motions of the machine itself. This provides optimum penetration angles with minimum resistance when digging, thereby increasing productivity while eliminating heel wear. The dipper was originally designed to dig softer materials, but can actually be used to dig or scoop any material from blasted hard rock to the softest oil sand. The dipper is also more open at the door than at the lip allowing the oil sand to naturally flow out of the dipper upon release. The prototype was demonstrated to an industry-wide audience in May 2005 on a recently rebuilt 1949 Dominion 500 shovel. Preliminary results indicate that the design is meeting the expectations of the designer. However, more tests are scheduled and JPi will continue to seek collaborations and partnerships with mining operations to produce and test a 75 cubic yard version of the dipper for use with modern shovels. 2 figs.

Migratory bird habitat in relation to tile drainage and poorly drained hydrologic soil groups

Science.gov (United States)

Kastner, Brandi; Christensen, Victoria G.; Williamson, Tanja N.; Sanocki, Chris A.

2016-01-01

The Prairie Pothole Region (PPR) is home to more than 50% of the migratory waterfowl in North America. Although the PPR provides an abundance of temporary and permanent wetlands for nesting and feeding, increases in commodity prices and agricultural drainage practices have led to a trend of wetland drainage. The Northern Shoveler is a migratory dabbling duck species that uses wetland habitats and cultivated croplands in the PPR. Richland County in North Dakota and Roberts County in South Dakota have an abundance of wetlands and croplands and were chosen as the study areas for this research to assess the wetland size and cultivated cropland in relation to hydrologic soil groups for the Northern Shoveler habitat. This study used geographic information system data to analyze Northern Shoveler habitats in association with Natural Resource Conservation Service soil data. Habitats, which are spatially associated with certain hydrologic soil groups, may be at risk of artificial drainage installations because of their proximity to cultivated croplands and soil lacking in natural drainage that may become wet or inundated. Findings indicate that most wetlands that are part of Northern Shoveler habitats were within or adjacent to cultivated croplands. The results also revealed soil hydrologic groups with high runoff potential and low water transmission rates account for most of the soil within the Northern Shoveler‘s wetland and cropland habitats. Habitats near agriculture with high runoff potential are likely to be drained and this has the potential of reducing Northern Shoveler habitat.

Soil Respiration Controls Ionic Nutrient Concentration In Percolating Water In Rice Fields

Science.gov (United States)

Kimura, M.

2004-12-01

Soil water in the plow layer in rice fields contains various kinds of cations and anions, and they are lost from the plow layer by water percolation. Some portions of CO2 produced by respirations of rice roots and soil microorganisms are also leached by water percolation to the subsoil layer as HCO3-. As the electrical neutrality of inorganic substances in percolating water is maintained when they are assumed to be in the form of simple cations and anions, soil respiration accelerates the leaching of ionic nutrients from the plow layer by water percolation. The proportion of inorganic carbon (Σ CO2) originated from photosynthates in the total Σ CO2 in soil solution in the plow layer was from 28 to 36 % in the rice straw amended soil and from 16 to 31 % in the soil without rice straw amendment in a soil pot experiment with rice plant after the maximum tillering stage. Most of Σ CO2 in percolating water from the plow layer accumulates in the subsoil layer. Periodical measurement of Σ CO2 in percolating water at 13 and 40 cm soil depths indicated that 10 % of total soil organic C in the plow layer was leached down from the plow layer (13 cm), and that about 90 % of it was retained in the subsoil layer to the depth of 40 cm. Water soluble organic materials are also leached from the plow layer by water percolation, and the leaching is accelerated by soil reduction. Soil reduction decreased the content of organic materials that were bound with ferric iron in soil (extractable by 0.1M Na4P2O7 + NaBH4) and increased the content of organic materials that were extractable by the neutral chelating solution (0.1M Na4P2O7). In addition, water percolation transformed the latter organic materials to those that were extractable by water and a neutral salt. Considerable portions of organic materials in percolating water are adsorbed in the subsoil layer, and then partially decomposed and polymerized to specific soil organic materials in the subsoil. Organic materials that were

[Effects of management regime on soil respiration from agroecosystems].

Science.gov (United States)

Chen, Shu-tao; Zhu, Da-wei; Niu, Chuan-po; Zou, Jian-wen; Wang, Chao; Sun, Wen-juan

2009-10-15

In order to examine the effects of management regime, such as nitrogen application and plowing method, on soil respiration from farmland, the static opaque chamber-gas chromatograph method was used to measure soil CO2 fluxes in situ. The field measurement was carried out for 5 growing seasons, which were the 2002-2003 wheat, 2003 maize and soybean, 2003-2004 wheat, 2004 maize and 2004-2005 wheat seasons. Our results showed that soil respiration increased in fertilizer-applied treatments compared with no fertilizer treatment after 3 times of fertilizer application on 9 November 2002, 14 February and 26 March 2003. And the most obvious increase appeared following the third fertilizer application. No significant difference in soil respiration was found among several fertilizer application treatments. The effect of plowing depth on soil respiration was contingent on preceding cropping practice. Over the 2003-2004 wheat-growing seasons (its preceding cropping practice was rice paddy), mean soil respiration rates were not significant different (p > 0.05) between no plowing treatment and shallow plowing treatment. The shallow plowing treatment CT2 led to higher soil CO2 losses compared with no plowing treatment of NT2 in the 2004 maize-growing season, however, the significant higher (p soil respiration rates occurred with no plowing treatment of NT3 in the following 2004-2005 wheat-growing season. Intensive plowing (25 cm depth), compared with no plowing practice (NT4), increased soil respiration significantly during the 2004-2005 wheat-growing season. Regression analysis showed that the exponential function could be employed to fit the relationship between soil respiration and temperature. The exponential relationship yielded the Q10 values which were varied from 1.26 to 3.60, with a mean value of 2.08. To evaluate the effect of temperature on soil respiration, the CO2 emission fluxes were normalized for each treatment and each crop growing season. Plotting the

Maritime archaeological explorations of Goa: Findings and interpretations

Digital Repository Service at National Institute of Oceanography (India)

Tripati, S.; Gaur, A.S.; Sundaresh; Vora, K.H.

chisel marks are cR.IDtlsod CIFQI~ S~'hPc1 distinctly visible all over the surface. The upper hole ('pX+<:u;% y!Gx. and lower two holes are smaller in comparison with size of the anchor. The upper portion of the anchor is round instead of square... anchor has been eai.m" Mil* 0ma.U. - C >Am .Jsm nicely chiselled leaving parallel lines all around the YYY surface. The undenvater explorations off Baga yielded a stone anchor having two rectangular piercing with a rectan- gular cutting...

Centimeter-scale spatial variability in 2-methyl-4-chlorophenoxyacetic acid mineralization increases with depth in agricultural soil

DEFF Research Database (Denmark)

Badawi, Nora; Johnsen, Anders R.; Sørensen, Jan

2013-01-01

Mineralization of organic chemicals in soil is typically studied using large homogenized samples, but little is known about the small-scale spatial distribution of mineralization potential. We studied centimeter-scale spatial distribution of 2-methyl-4-chlorophenoxyacetic acid (MCPA) mineralization...... was mineralized in all samples in the plow layer, but only about 60% in the transition zone immediately below the plow layer showed mineralization; at greater depth even fewer samples showed mineralization. A patchy spatial distribution of mineralization activity was observed from right below the plow layer...... activity at different depths (8-115 cm) in a Danish agricultural soil profi le using a 96-well microplate C-radiorespirometric method for small-volume samples. The heterotrophic microbial population and specifi c MCPA degraders decreased 10- to 100-fold from the plow layer to a depth of 115 cm. MCPA...

Real promise or false hope: DOE's title XVII loan Guarantee

Energy Technology Data Exchange (ETDEWEB)

Massouh, Jennifer F.; Cannon, George D. Jr.; Logan, Suzanne M.; Schwartz, David L.

2009-05-15

While the American Recovery and Reinvestment Act of 2009 expanded the DOE loan guarantee program to include certain ''shovel-ready'' projects, and appropriated $6 billion to cover the credit subsidy cost associated with these projects, it failed to resolve some of the most pressing problems facing the program. Here are some recommendations that may finally get some shovels in the ground. (author)

ATIVIDADE DO ALUMÍNIO NA SOLUÇÃO DO SOLO DE UM LATOSSOLO VERMELHO DISTRÓFICO SUBMETIDO AO MANEJO DO SOLO E DE CULTURAS

Directory of Open Access Journals (Sweden)

Silvio Tulio Spera

2014-09-01

concerning the percentage of activity and forms of toxic Al in two soil layers situated among 0 to 20 cm. The samples were from experiment conducted in Passo Fundo, RS, in a Typic Haplustox, after more than two decades of cropping, without limestone application. The experimental design was randomized block, in subplots scheme. The treatments consisted of: no-tillage (PD, minimum cultivation with chisel plow (PM and conventional plowing with disk plow (PC. These were combined with crop rotations: wheat-soybean (R1; wheat- soybean/common vetch-sorghum (R2 and wheat-soybean/common vetch-sorghum/white oats-soybean (R3, to assess the effect of these rotations interactions with the soil management type on the grains yield (RG, in the crops dry mass(MS and chemical attributes of soil solution concerning the percentage on activity and forms of Al toxic, in layers of 0 to 6.7 cm and 6.8 to 20 cm. There were no correlations between the RG and the MS and the soil attributes assessed, in both layers, even when differences in levels of chemical and physical constraint between the layers. Chemical attributes of soil solution were not influenced by the  studied factors interaction, being slightly influenced by crop rotation. The PD provided the greatest values of dissolved organic carbon and lowest level and Al activity in soil solution. Keywords: soil acidity; no-till, soil plowing, soil chemistry. DOI: http://dx.doi.org/10.14583/2318-7670.v02n03a01

Soil, water, and nutrient losses from management alternatives for degraded pasture in Brazilian Atlantic Rainforest biome.

Science.gov (United States)

Rocha Junior, Paulo Roberto da; Andrade, Felipe Vaz; Mendonça, Eduardo de Sá; Donagemma, Guilherme Kangussú; Fernandes, Raphael Bragança Alves; Bhattharai, Rabin; Kalita, Prasanta Kumar

2017-04-01

The objective of this study was to evaluate sediment, water and nutrient losses from different pasture managements in the Atlantic Rainforest biome. A field study was carried out in Alegre Espiríto Santo, Brazil, on a Xanthic Ferralsol cultivated with braquiaria (Brachiaria brizantha). The six pasture managements studied were: control (CON), chisel (CHI), fertilizer (FER), burned (BUR), plowing and harrowing (PH), and integrated crop-livestock (iCL). Runoff and sediment samples were collected and analyzed for calcium (Ca), magnesium (Mg), potassium (K), phosphorus (P) and organic carbon contents. Soil physical attributes and above and below biomass were also evaluated. The results indicated that higher water loss was observed for iCL (129.90mm) and CON (123.25mm) managements, and the sediment losses were higher for CON (10.24tha -1 ) and BUR (5.20tha -1 ) managements when compared to the other managements. Majority of the nutrients losses occurred in dissolved fraction (99% of Ca, 99% of Mg, 96% of K, and 65% of P), whereas a significant fraction of organic carbon (80%) loss occurred in a particulate form. Except for P, other nutrients (Ca, Mg and K) and organic carbon losses were higher in coarse sediment compared to fine sediment. The greater losses of sediment, organic carbon, and nutrients were observed for CON followed by BUR management (plosses from various practices, to reduce pasture degradation, farmers should adopt edaphic practices by applying lime and fertilize to improve pasture growth and soil cover, and reducing soil erosion in the hilly Brazilian Atlantic Rainforest biome. Copyright © 2016. Published by Elsevier B.V.

Efectos de tratamientos de labranza sobre la resistencia a la penetración de un Andisol Effects of tillage treatments on penetration resistance on an andisol

Directory of Open Access Journals (Sweden)

Jiménez Javier

1992-06-01

Full Text Available Se evaluó el efecto sobre la resistencia a la penetración de cuatro implementos de labranza (arado de cinceles, arado de discos, rastrillo californiano y arado rotatorio en un Andisol (Andic-Eutropept serie Tibaitatá. Para las medidas, se utilizó un penetrómetro registrador digital. Los resultados mostraron que los tratamientos que involucraron arado rotatorio y arado de discos y rastrillo fueron los que causaron el mayor grado de aflojamiento del suelo. Sin embargo, dichos tratamientos fueron los más susceptibles a la compactación por pase de llantas. No se pudo concluir lo planteado por la literatura de que el fondo de surco de arado es una zona de alto
riesgo de compactación del subsuelo. La resistencia a la penetración resultó un buen indicador para evaluar efectos físicos sobre el suelo causarlos por implementos de labranza y él tránsito de maquinaria.The effects on Cone Penetration Resistance caused by four tillage implements (chisel plow, disk plough, disk harrow and rotatiller were assesed on an Andisol, using a digital penetrometer. The results showed the treatments using rota-tiller and those using disk plough and disk harrow caused
the maximun soilloosening. However those treatments were the most sensitive to compaction due to the traffic of tractor
wheels. This work did not present conclusive evidence that bottom of furrow made by disk plough is a place of high risk for subsoil cornpactlon. Cone penetration resistance looks like a good index to assess changes in physical properties of the soil caused by tillage operations and machinery traffic.

Morphology of bone particles after harvesting with 4 different devices.

Science.gov (United States)

Papadimitriou, Dimitrios E V; Schmidt, Erich C; Caton, Jack G; Romanos, Georgios E

2013-04-01

Autogenous bone is routinely used for regeneration of osseous defects around teeth and implants, and different instruments are available for bone harvesting. The purpose of this study was to describe the morphology of bone particles after harvesting with 4 different instruments. Bone particles were harvested from fresh cow ribs with 2 different types of back action chisels, a safescraper and a sonic device. The samples were examined morphologically using light microscopy and scanning electron microscopy. The bone particles after the back action chisel I had an appearance similar to "pencil shavings." With the back action chisel II, they were like thin paper with an "accordion bellows" appearance. After removal with the safescraper, they had an irregular shape (with an irregular surface) resembling "crushed stone." Finally, the appearance of the bone particles obtained with the sonic device was homogenous, condensed and continuous, and had a "seaweed" appearance. Harvesting of bone particles with 4 different devices produce distinctly difference sizes and shapes, which may influence the results of grafting procedures.

Evaluation of the Viking-Cives towplow for winter maintenance.

Science.gov (United States)

2014-01-01

To maximize efficiency while minimizing costs within ODOTs winter maintenance budget, ODOT is : evaluating new methods of snow and ice removal. One method is the use of the Viking-Cives TowPlow. The : TowPlow is pulled behind a tandem axle truck a...

Electron Acceleration in Wakefield and Supra-Bubble Regimes by Ultraintense Laser with Asymmetric Pulse

International Nuclear Information System (INIS)

Maimaitiaili, Bake; Sayipjamal, Dulat; Aimierding, Aimidula; Xie Baisong

2011-01-01

Electron acceleration in plasma driven by circular polarized ultraintense laser with asymmetric pulse are investigated analytically and numerically in terms of oscillation-center Hamiltonian formalism. Studies include wakefield acceleration, which dominates in blow-out or bubble regime and snow-plow acceleration which dominates in supra-bubble regime. By a comparison with each other it is found that snow-plow acceleration has lower acceleration capability. In wakefield acceleration, there exists an obvious optimum pulse asymmetry or/and pulse lengths that leads to the high net energy gain while in snow-plow acceleration it is insensitive to the pulse lengths. Power and linear scaling laws for wakefield and snow-plow acceleration respetively are observed from the net energy gain depending on laser field amplitude. Moreover, there exists also an upper and lower limit on plasma density for an effective acceleration in both of regimes. (physics of gases, plasmas, and electric discharges)

Mine games

Energy Technology Data Exchange (ETDEWEB)

Patchett, A. [Hitachi Construction Equipment (United Kingdom)

2006-09-15

The article describes various excavators used in the UK by Hall Construction for coal mining and reclamation projects. They include machines from Hitachi Construction Machinery that have been modified with a coal shovel at the front end. The ZX350LC-3, for example incorporates a coal shovel, manufactured by Kocurek, to allow it to work at the rock face and lift coal into road wagons or dump trucks. 5 figs.

Guide to request license for industrial X-rays practices

International Nuclear Information System (INIS)

2000-05-01

In this work the instructions it plows described to request license for practices it of industrial x-ray it continued. The instructions but important: they plows license type, purpose of the application, source and equipment, location of local the, program of radiological protection and security

Increasing gender equality among small millet farmers in South Asia

International Development Research Centre (IDRC) Digital Library (Canada)

rich in dietary fiber, have low glycemic index and are known for their ... plows, instead of the wooden plows traditionally ... working in six sites in India, and one site each in Nepal and ... three main areas of focus: enhancing the role of women in ...

Strip mining with hydraulic shover and cross-pit stacker; Tagebau mit hydraulischen Hochloeffelbagger und Direktversturz-Absetzer

Energy Technology Data Exchange (ETDEWEB)

Streck, W. [Dipl.-Ing. Willibald Streck, Boden, Wasser, Rohstoff, Bruehl (Germany)

2005-09-01

In the standard strip mining of sedimentary deposits draglines are used for overburden removal. In this paper an alternative is presented which offers significantly lower initial investment costs and equal operating and maintenance costs. It is applicable in certain mining conditions. The stripping system consists of a standard hydraulic shovel excavator loading into a hopper/stacker on crawlers (XPS). With a shovel of 34 m{sup 3} size the stripping height is limited to approximately 15 to 17 m. Cuts of 15 to 20 m width may be worked. The XPS may have a hopper size of 70 m{sup 3} and a discharge boom of 70 m. The system reaches an annual capacity in the range of 12 mill bank m{sup 3}. It compares well with a standard dragline of the Bucyrus W 2000 type. While the operating and maintenance cost per bank m{sup 3} are about the same, the initial investment costs differ drastically, about 16 mill US-Dollar for the shovel/XPS compared to 24 mill US-Dollar for the dragline. In new surface mining projects and under distinct mining conditions the low investment costs and other advantages may balance the limitations of the shovel/XPS system and justify the deviation from the standard stripping dragline. (orig.)

Effect of Conversion from Natural Grassland to Arable Land on Soil Carbon Reserve in the Argentinean Rolling Pampas

Science.gov (United States)

Andriulo, A. E.; Irizar, A. B.; Mary, B.; Wilson, M. G.

2012-04-01

The evaluation of the effect of land use change on accumulation of soil organic carbon (SOC) requires reliable data obtained from georeferenced sites with land use history records. The purpose of this study was to evaluate long term changes in the reserves of SOC in a typical Argiudol of the Pergamino series after the introduction of agriculture. Measures of soil organic carbon concentration and bulk density of Ap and A12 horizons were carried out in three sites of the Pergamino County (N of Buenos Aires province): a reference field with untilled pristine soil (33° 57' S; 60° 34' W), a field with 31 years (1980-2011) of agriculture (31Y) located next to the former, and a third field (33° 46' S; 60° 37' W) with 80 years (1910/1990) of agriculture (80Y). 31Y has been under continuous soybean cultivation with conventional tillage (CT) that consists of moldboard plow or double disk harrowing. At 80K the cultivation sequence was: 44 years of corn + 9 years of flax + 2 years of wheat + 17 years of wheat/soybean double cropping + 1 year of lentil; mostly under CT, some years under chisel plow during the 70's and a few years under zero tillage in soybean after wheat sown with conventional tillage during the 80's. Before the introduction of mechanical harvesting (1947) crop residues were burnt as well as the wheat stubble during the conventional double cropping period (1970-1980). Soil texture (23±1% clay, with predominance of illite) and field slopes (<0.5%) were similar in the three sites. Nitrogen and phosphorus fertilization rates were minimal due to the low crop response. The results are expressed in Mg ha-1 for an A soil horizon mass of 2500 Mg ha-1. The introduction of agriculture decreased SOC stock: 31Y varied from 68.3 to 40.1 Mg ha-1 (41.3% loss) and 80Y from 68.3 to 47.2 Mg ha-1 (30% loss). The SOC loss was the result of the mineralization of a large amount labile SOC present in the pristine soil and low annual additions of carbon issued from crop residue

Influence of the Plow Filling and Thread Angle onto the Plow Head Efficiency / Wpływ Współczynnika Wypełnienia Organu Oraz Kąta Nawinięcia Płata Ślimaka Na Sprawność Ładowania Frezującymi Organami Ślimakowymi

Science.gov (United States)

Wydro, Tomasz

2015-03-01

Laboratory examinations on the plow heads at various filling rate and material grain-size, as well as various values of worm thread angle of the plow head have been executed. Influence of the worm thread angle and plow head filling onto optimal loading efficiency, has also been tested. Eksploatacja węgla kamiennego w Polsce odbywa się przy zastosowaniu kompleksów ścianowych kombajnowych jak również kompleksów strugowych. Ten drugi z kompleksów jest znacznie mniej rozpowszechniony w Polsce i stosowany do pokładów o miąższości poniżej 1,5 m. Do głównych maszyn i urządzeń ścianowego kompleksu kombajnowego należy zaliczyć maszynę urabiająco - ładującą jaką jest kombajn ścianowy, obudowę zmechanizowaną oraz przenośnik ścianowy. Elementami roboczymi w kombajnie ścianowym są frezujące organy ślimakowe, które mocowane są na ramionach kombajnu. Zadaniem frezujących organów ślimakowych jest realizacja jednocześnie dwóch procesów. Pierwszym z procesów jest frezowanie czyli oddzielanie kawałków węgla od calizny. Drugi proces to proces ładowania urobku, polegający na ciągłym odprowadzaniu urobku na przenośnik ścianowy. Równoległość realizacji pracy tych dwóch procesów, uniemożliwia w warunkach rzeczywistych przeprowadzenie obserwacji procesu ładowania i dokonania jakichkolwiek pomiarów i analiz. Dlatego też, przeprowadzane badania i pomiary opisywane w literaturze zwykle miały charakter modelowy lub stanowiskowy, gdyż tylko takie warunki umożliwiały rozdział tych funkcji organu (Chodura, 1992; Hyong Jong Gol, 1990; Jaszczuk & Tomaszewski, 2004; Krauze, 1997). W związku z powyższym, chcąc bliżej poznać prawa rządzące procesem ładowania, zdecydowano się na rozdzielenie tych dwóch procesów i przeprowadzenie badań laboratoryjnych. Przedmiotowe badania zostały przeprowadzone w laboratorium Katedry Maszyn Górniczych, Przeróbczych i Transportowych AGH. W badaniach uwzględniono wpływ jednego z

Relationship between waterfowl nutrition and condition on agricultural drainwater ponds in the Tulare Basin, California: waterfowl body composition

Science.gov (United States)

Euliss, N.H.; Jarvis, R.L.; Gilmer, D.S.

1997-01-01

We examined carcass composition and proximate food composition of ruddy ducks (Oxyura jamaicensis), northern shovelers (Anas clypeata), and northern pintails (Anas acuta) wintering on agricultural drainwater ponds in California during 1983-84. Lipids varied seasonally in northern shovelers and northern pintails. Protein did not fluctuate except in ruddy ducks whose protein mass increased over winter, suggesting that some protein was catabolized prior to arrival on wintering areas or that a buildup of protein occurred prior to spring migration. Waterfowl diets varied among species and time, but the nutritional composition of the diets was relatively stable. Ruddy ducks and shovelers consumed mostly animal foods rich in protein (53-60%) and low in Nitrogen Free Extract (NFE)(1-7%). Pintail diets contained more NFE (23-38%) and less protein (14-38%) because of greater consumption of plant foods. Nutritional composition of pintail diets varied with lower protein consumption occurring from November through January.

WEED CONTROL EFFECTS ON SOIL CHEMICAL CHARACTERISTICS

Directory of Open Access Journals (Sweden)

Paulo Sérgio Lima e Silva

2008-01-01

Full Text Available The weed control procedures are known to affect the soil physical attributes and the nutrient amount taken up by weed roots. This work hypothesis is that weed control methods might also affect soil chemical attributes. Four experiments were carried out, three with maize (E-1, E-2 and E-3 and one with cotton (E-4, in randomized complete blocks design arranged in split-plots, with five replications. In E-1 experiment, the plots consisted of two weed control treatments: no-weed control and weed shovel-digging at 20 and 40 days after sowing; and the subplots consisted of six maize cultivars. In the three other experiments, the plots consisted of plant cultivars: four maize cultivars (E-2 and E-3 and four cotton cultivars (E-4. And, the subplots consisted of three weed control treatments: (1 no-weed control; (2 weed shovel-digging at 20 and 40 days after sowing; and (3 intercropping with cowpea (E-2 or Gliricidia sepium (Jacq. Walp. (E-3 and E-4. In all experiments, after harvest, eight soil samples were collected from each subplot (0-20 cm depth and composed in one sample. Soil chemical analysis results indicated that the weed control by shovel-digging or intercropping may increase or decrease some soil element concentrations and the alterations depend on the element and experiment considered. In E-2, the weed shovel-dug plots showed intermediate soil pH, lower S (sum of bases values and higher soil P concentrations than the other plots. In E-4, soil K and Na concentrations in plots without weed control did not differ from plots with intercropping, and in both, K and Na values were higher than in weed shovel-dug plots. Maize and cotton cultivars did not affect soil chemical characteristics.

Isolation of phyllosilicate-iron redox cycling microorganisms from an illite-smectite rich hydromorphic soil.

Science.gov (United States)

Shelobolina, Evgenya; Konishi, Hiromi; Xu, Huifang; Benzine, Jason; Xiong, Mai Yia; Wu, Tao; Blöthe, Marco; Roden, Eric

2012-01-01

The biogeochemistry of phyllosilicate-Fe redox cycling was studied in a Phalaris arundinacea (reed canary grass) dominated redoximorphic soil from Shovelers Sink, a small glacial depression near Madison, WI. The clay size fraction of Shovelers Sink soil accounts for 16% of the dry weight of the soil, yet contributes 74% of total Fe. The dominant mineral in the clay size fraction is mixed layer illite-smectite, and in contrast to many other soils and sediments, Fe(III) oxides are present in low abundance. We examined the Fe biogeochemistry of Shovelers Sink soils, estimated the abundance of Fe redox cycling microorganisms, and isolated in pure culture representative phyllosilicate-Fe oxidizing and reducing organisms. The abundance of phyllosilicate-Fe reducing and oxidizing organisms was low compared to culturable aerobic heterotrophs. Both direct isolation and dilution-to-extinction approaches using structural Fe(II) in Bancroft biotite as a Fe(II) source, and O(2) as the electron acceptor, resulted in recovery of common rhizosphere organisms including Bradyrhizobium spp. and strains of Cupriavidus necator and Ralstonia solanacearum. In addition to oxidizing biotite and soluble Fe(II) with O(2), each of these isolates was able to oxidize Fe(II) in reduced NAu-2 smectite with [Formula: see text] as the electron acceptor. Oxidized NAu-2 smectite or amorphous Fe(III) oxide served as electron acceptors for enrichment and isolation of Fe(III)-reducing microorganisms, resulting in recovery of a strain related to Geobacter toluenoxydans. The ability of the recovered microorganisms to cycle phyllosilicate-Fe was verified in an experiment with native Shovelers Sink clay. This study confirms that Fe in the native Shovelers Sink clay is readily available for microbial redox transformation and can be cycled by the Fe(III)-reducing and Fe(II)-oxidizing microorganisms recovered from the soil.

Isolation of Phyllosilicate–Iron Redox Cycling Microorganisms from an Illite–Smectite Rich Hydromorphic Soil

Science.gov (United States)

Shelobolina, Evgenya; Konishi, Hiromi; Xu, Huifang; Benzine, Jason; Xiong, Mai Yia; Wu, Tao; Blöthe, Marco; Roden, Eric

2012-01-01

The biogeochemistry of phyllosilicate–Fe redox cycling was studied in a Phalaris arundinacea (reed canary grass) dominated redoximorphic soil from Shovelers Sink, a small glacial depression near Madison, WI. The clay size fraction of Shovelers Sink soil accounts for 16% of the dry weight of the soil, yet contributes 74% of total Fe. The dominant mineral in the clay size fraction is mixed layer illite–smectite, and in contrast to many other soils and sediments, Fe(III) oxides are present in low abundance. We examined the Fe biogeochemistry of Shovelers Sink soils, estimated the abundance of Fe redox cycling microorganisms, and isolated in pure culture representative phyllosilicate–Fe oxidizing and reducing organisms. The abundance of phyllosilicate–Fe reducing and oxidizing organisms was low compared to culturable aerobic heterotrophs. Both direct isolation and dilution-to-extinction approaches using structural Fe(II) in Bancroft biotite as a Fe(II) source, and O2 as the electron acceptor, resulted in recovery of common rhizosphere organisms including Bradyrhizobium spp. and strains of Cupriavidus necator and Ralstonia solanacearum. In addition to oxidizing biotite and soluble Fe(II) with O2, each of these isolates was able to oxidize Fe(II) in reduced NAu-2 smectite with NO3- as the electron acceptor. Oxidized NAu-2 smectite or amorphous Fe(III) oxide served as electron acceptors for enrichment and isolation of Fe(III)-reducing microorganisms, resulting in recovery of a strain related to Geobacter toluenoxydans. The ability of the recovered microorganisms to cycle phyllosilicate–Fe was verified in an experiment with native Shovelers Sink clay. This study confirms that Fe in the native Shovelers Sink clay is readily available for microbial redox transformation and can be cycled by the Fe(III)-reducing and Fe(II)-oxidizing microorganisms recovered from the soil. PMID:22493596

Runoff losses of sediment and phosphorus from no-till and cultivated soils receiving dairy manure.

Science.gov (United States)

Verbree, David A; Duiker, Sjoerd W; Kleinman, Peter J A

2010-01-01

Managing manure in no-till systems is a water quality concern because surface application of manure can enrich runoff with dissolved phosphorus (P), and incorporation by tillage increases particulate P loss. This study compared runoff from well-drained and somewhat poorly drained soils under corn (Zea mays, L.) production that had been in no-till for more than 10 yr. Dairy cattle (Bos taurus L.) manure was broadcast into a fall planted cover crop before no-till corn planting or incorporated by chisel/disk tillage in the absence of a cover crop. Rainfall simulations (60 mm h(-1)) were performed after planting, mid-season, and post-harvest in 2007 and 2008. In both years and on both soils, no-till yielded significantly less sediment than did chisel/disking. Relative effects of tillage on runoff and P loss differed with soil. On the well-drained soil, runoff depths from no-till were much lower than with chisel/disking, producing significantly lower total P loads (22-50% less). On the somewhat poorly drained soil, there was little to no reduction in runoff depth with no-till, and total P loads were significantly greater than with chisel/disking (40-47% greater). Particulate P losses outweighed dissolved P losses as the major concern on the well-drained soil, whereas dissolved P from surface applied manure was more important on the somewhat poorly drained soil. This study confirms the benefit of no-till to erosion and total P runoff control on well-drained soils but highlights trade-offs in no-till management on somewhat poorly drained soils where the absence of manure incorporation can exacerbate total P losses.

Energy use and economic analysis of strawberry production in Sanandaj zone of Iran

Directory of Open Access Journals (Sweden)

Salami, P.

2010-01-01

Full Text Available The aim of this study was to determine the energy consumption and economic analysis for strawberry production. The data were collected from 60 farmers growing strawberry in the Sanandaj zone of Iran by using a face-to-face questionnaire in August-September 2009. The plowing operation at the study area was done by two methods; manually plow (P1 and machinery plow (P2. Also the irrigation operation was done by two methods; pumping irrigation (P and non pumping irrigation (NP. Univariate analysis of variance was used for finding the differences among the total energy used for production and profitability of this crop in the different methods at the 5% and 1% level. Total energy used in various farm operations during strawberry production was 53,605 MJ.ha-1. Total energy output was 17,338 MJ.ha-1, and the average annual yield of strawberry farms was 9,125 kg.ha-1. Energy efficiency was 0.32, and energy productivity calculated as 0.17 kg.MJ-1. This means a production of 0.17 kg per unit energy. The difference between total input energy in the different irrigation types (NP and P is significant at 1% level. There is not any significant difference between different plow types at the 5% level. The interaction of irrigation types and plow types is significant at 5% level. The profit-cost ratio, productivity, and net profit in the strawberry production are 1.2, 0.99, and 1,825 $.ha-1, respectively. The difference between net return in the different irrigation types (NP and P is significant at 5% level. The difference between net return in the different plow types (P1 and P2 is significant at 1% level.

Influence of different combinations of cultivation techniques and a number of ameliorants on radiocesium contents in crop products grown in meadows

International Nuclear Information System (INIS)

Bystritskij, V.S.; Klimov, O.V.; Karnafel', P.V.; Kostyushko, P.V.

1992-01-01

The investigations have been performed at the meadows where soils are sandy, sod-podzolic, the area under investigation being the zone of strict radiation monitoring. The density of soil contamination with radiocesium was 20-25 Ci/sq.km. 4 cultivation techniques and 6 procedures of soil amelioration have been studied. It has been proved that Cs-134, -137 content reduces by a factor of 3.0 to 3.5 under conditions of standard plowing (down to 18 to 20 cm) and by a factor of 5 to 6 under conditions of deep plowing (down to 35 to 40 cm). For deep plowing when radiocontaminated sward was buried, radionuclide accumulation in crop products reduces by a factor of 1.5 as compared to standard plowing. When burial of radiocontaminated sward mixed with peat was provided, the radionuclide content has reduced by a factor of 2.0 to 2.5. When the radiocontaminated sword mixed with potassium chloride and lime was buried, the radionuclide content in crop products has reduced by a factor of 3. 5 tabs

EFFECT OF SOIL TILLAGE AND PLANT RESIDUE ON SURFACE ROUGHNESS OF AN OXISOL UNDER SIMULATED RAIN

Directory of Open Access Journals (Sweden)

Elói Panachuki

2015-02-01

Full Text Available Surface roughness of the soil is formed by mechanical tillage and is also influenced by the kind and amount of plant residue, among other factors. Its persistence over time mainly depends on the fundamental characteristics of rain and soil type. However, few studies have been developed to evaluate these factors in Latossolos (Oxisols. In this study, we evaluated the effect of soil tillage and of amounts of plant residue on surface roughness of an Oxisol under simulated rain. Treatments consisted of the combination of the tillage systems of no-tillage (NT, conventional tillage (CT, and minimum tillage (MT with rates of plant residue of 0, 1, and 2 Mg ha-1 of oats (Avena strigosa Schreb and 0, 3, and 6 Mg ha-1 of maize (Zea mays L.. Seven simulated rains were applied on each experimental plot, with intensity of 60±2 mm h-1 and duration of 1 h at weekly intervals. The values of the random roughness index ranged from 2.94 to 17.71 mm in oats, and from 5.91 to 20.37 mm in maize, showing that CT and MT are effective in increasing soil surface roughness. It was seen that soil tillage operations carried out with the chisel plow and the leveling disk harrow are more effective in increasing soil roughness than those carried out with the heavy disk harrow and leveling disk harrow. The roughness index of the soil surface decreases exponentially with the increase in the rainfall volume applied under conditions of no tillage without soil cover, conventional tillage, and minimum tillage. The oat and maize crop residue present on the soil surface is effective in maintaining the roughness of the soil surface under no-tillage.

Morfologia de agregados do solo avaliada por meio de análise de imagens Morphology of soil aggregates evaluated by images analysis

Directory of Open Access Journals (Sweden)

N. Olszevski

2004-10-01

deterioration of soil physical properties, mainly due to modifications in the soil structure pattern. Once the structural changes could affect the morphology aggregates in different ways, the search for new methods of studying soil macro-morphological characteristics must be prioritized to allow the observation of modified characteristics in cultivated soils. Therefore, this study was carried out to adapt and test a digital method for a qualitative macro-morphological analysis of soil aggregates of Rodhic Haplustox in samples taken in 1998, aiming to detect morphological modifications caused by human activities. From an original set of eleven, five replicated treatments were selected: no till, cinzel plow, heavy disk harrow, disk plow and chisel plow, carried out annually. The shape of the different soil aggregates was from images obtained using a scanner (HP 6100C with 1200 dpi optical resolution which were then processed by the computer program UTHSCSA Image Tool. This program furnishes values of different aggregate indexes: roundness, compactness and lengthiness. The roundness index depends on the perimeter measurement (external roughness and the compactness and lengthiness indexes depend on the measurement of the length of the longest axle (long edges. Generally, the management systems used during three consecutive years did not modify the aggregate morphology of the clayey Rodhic Haplustox for the analyzed variables. Image analysis sensitively detected alterations in soil aggregate morphology promising considerable usefulness as a novel tool for on soil structure studies.

The earliest herbivorous marine reptile and its remarkable jaw apparatus.

Science.gov (United States)

Chun, Li; Rieppel, Olivier; Long, Cheng; Fraser, Nicholas C

2016-05-01

Newly discovered fossils of the Middle Triassic reptile Atopodentatus unicus call for a radical reassessment of its feeding behavior. The skull displays a pronounced hammerhead shape that was hitherto unknown. The long, straight anterior edges of both upper and lower jaws were lined with batteries of chisel-shaped teeth, whereas the remaining parts of the jaw rami supported densely packed needle-shaped teeth forming a mesh. The evidence indicates a novel feeding mechanism wherein the chisel-shaped teeth were used to scrape algae off the substrate, and the plant matter that was loosened was filtered from the water column through the more posteriorly positioned tooth mesh. This is the oldest record of herbivory within marine reptiles.

Final Environmental Assessment, Construct Antenna Parts Storage Facility, Upgrade Perimeter Security Fence and Demolish Camera Shed, Red River Air Force Space Surveillance Station (AFSSS), Lewisville, Arkansas

Science.gov (United States)

2012-11-01

root plowed for construction of the Installation. Now the Installation consists mostly of short grasses which are routinely mowed. Woods border...aristata* bracted plantain Rumex crispus* curly dock Setaria parviflora yellow bristlegrass Solanum carolinense* Carolina horse nettle Sorghum...the land was covered with a hardwood forest. The land was cleared and root plowed dur- ing construction of the Installation. Earthen platforms were

MANEJO DO SOLO E CRESCIMENTO INICIAL DE Eucalyptus grandis Hill ex Maiden EM ARGISSOLO

Directory of Open Access Journals (Sweden)

Juliana Prevedello

2013-01-01

Full Text Available The forest species cultivation with rapid growth in Brazil has increased, mainly due to the diverse use of its wood and climate adaptation. The cultivation with minimum tillage in the forest sector stands out a way to increase productivity, combined with the maintenance of biodiversity and soil conservation. This study was conducted at the experimental area of State Foundation for Agricultural Research - Research Center for Forestry in Santa Maria - RS, with aimed to evaluate the effect of the soil tillage methods on soil physical properties and on initial development of Eucalyptus grandis, in a sandy loam Typic Hapludalf. Four soil management practices were compared: no-tillage; chisel tillage; chisel tillage plus harrowing and; rotary tillage (rotary tiller, installed in a randomized block design with three replications. The soil under no-tillage conditioned lower initial growth of eucalyptus due higher soil penetration resistance and bulk density, when compared with treatments with mobilization. The root distribution analysis in soil, despite being a qualitative method, was effective in demonstrating the effect of soil tillage for the Eucalyptus grandis plantation. The soil tillage with mobilization resulted in a higher initial growth of Eucalyptus grandis. The chisel tillage effects in the soil physical properties persisted after one year of soil tillage.

Benefits of weight control

Energy Technology Data Exchange (ETDEWEB)

Mallak, D. [P & H Mining Equipment (United States)

2006-07-15

With haul truck tyres and fuel taking a greater toll on operating costs, controlling haul truck payloads is more important than ever. The paper explains the technologies behind two new optional systems that let operators take control. P & H has introduced two new shovel-based payload measurement options that break new ground for accuracy in the Payload{trademark} and Payload{trademark} Plus Monitoring Systems. Both require P & M's Centurion supervisory control and data acquisition (SCADA) system. The Payload system can be retrofitted on existing shovels. 4 figs.

Fatigue crack behaviour in mine excavator

Energy Technology Data Exchange (ETDEWEB)

Yin, Y.; Grondin, G.Y.; Elwi, A.E. [Alberta Univ., Edmonton, AB (Canada). Dept. of Civil and Environmental Engineering

2006-05-15

Fatigue cracking in excavation equipment represents a significant operating cost for oil sands operators. It is caused by high impact loads, the high frequency of load cycles, and large component sizes found in oil sands processing facilities. Monitoring and repair strategies for fatigue cracks are typically based on vendor specifications and the experience of maintenance personnel. This paper provided details of an optimized crack management program applied to a BE 395B shovel boom. The proposed crack management tool uses a chart to predict the remaining life of a corner crack in the shovel boom. Predictions are based on limited field measurements of operating loads as well as on data obtained from fatigue testing of boom material, and a finite element analysis of the shovel boom. Field and laboratory data are used along with fracture mechanics and finite element modelling to predict crack life. It was concluded that the tool will allow inspectors and planners to schedule repairs based on safe service life. The tool is applicable for any components subjected to fatigue loading. 3 refs., 21 tabs., 64 figs.

Present situation and the future task of pumps and motors for mobile application; Kensetsu kikai sharyoyo pump/motor no genjo to kadai

Energy Technology Data Exchange (ETDEWEB)

Ishii, S.

1994-09-15

The current technologies of hydraulic pumps and motors for construction machinery and vehicles are discussed. A bent axis type axial double piston pump for negative feedback control systems and a cam plate type double piston pump superior in responsibility for load sensing control systems are usually used for hydraulic shovels. A split flow type double piston pump is on the increase for mini-shovels, having an unsolved problem as pressure fluctuation. The use of piston pumps is increasing rapidly for cranes, and a cam plate type axial piston pump is mainly used for large cranes. A traveling motor integrated with a transmission gear is usually used for hydraulic shovels, and a swing motor with valves and a brake in its casing is also used. A bent axis type variable displacement motor combined with a transmission is on the increase for winches, and a reliable preventing system from drop of suspended loading is expected to be developed rapidly. HST for traveling is also diffusing into small construction machinery. 12 figs.

Perceived hunger is lower and weight loss is greater in overweight premenopausal women consuming a low-carbohydrate/high-protein vs high-carbohydrate/low-fat diet.

Science.gov (United States)

Nickols-Richardson, Sharon M; Coleman, Mary Dean; Volpe, Joanne J; Hosig, Kathy W

2005-09-01

The impact of a low-carbohydrate/high-protein diet compared with a high-carbohydrate/low-fat diet on ratings of hunger and cognitive eating restraint were examined. Overweight premenopausal women consumed a low-carbohydrate/high-protein (n=13) or high-carbohydrate/low-fat diet (n=15) for 6 weeks. Fasting body weight (BW) was measured and the Eating Inventory was completed at baseline, weeks 1 to 4, and week 6. All women experienced a reduction in BW (Plow-carbohydrate/high-protein vs high-carbohydrate/low-fat group at week 6 (Plow-carbohydrate/high-protein but not in the high-carbohydrate/low-fat group from baseline to week 6. In both groups, self-rated cognitive eating restraint increased (Plow-carbohydrate/high-protein group may have contributed to a greater percentage of BW loss.

Les effets de trois techniques de travail du sol sur son état structural et hybrique

Directory of Open Access Journals (Sweden)

Hamza, ME.

1994-01-01

Full Text Available The Effects of Three Soil Preparation Techniques on its Structural and Hydric Conditions. The effects of three soil preparation techniques on its structural and hydric condition were studied through field experiments. The three techniques studied were soil turning-over with a mouldboard plough, no turning-over with a chisel plough and a superficial turning-over with a disk harrow. The structural and hydric condition were characterised by the dry apparent specifie weight, the permeability and the soil water content. The results showed a porous condition with mouldboard plough characterised by sub-horizontal discontinuities wich slow vertical infiltration of water and ensure the highest drying effect. Chisel plough allowed the greatest water infiltration and disk harrow ensured the lowest soil drying effect.

Manejo do solo e o rendimento de soja, milho, feijão e arroz em plantio direto Yield of soybean, corn, common bean and rice under no-tillage management

Directory of Open Access Journals (Sweden)

João Kluthcouski

2000-03-01

Full Text Available O sistema de plantio direto tem sido adotado expressivamente por agricultores do cerrado brasileiro. Contudo, seu uso continuado em regiões tropicais, com insuficiência de cobertura do solo e sucessivas adubações superficiais, pode resultar em alterações nos parâmetros do solo, como compactação e acúmulo de nutrientes na superfície, e na baixa expressão do potencial produtivo das culturas. O presente estudo teve como objetivo principal verificar o efeito de quatro sistemas de manejo de solo (plantio direto; grade aradora; escarificação profunda e aração profunda associados com três níveis de adubação fosfatada e potássica (sem adubação, recomendação oficial e equivalente a exportação pelas colheitas sobre o rendimento das culturas do milho, soja, feijão e arroz em área submetida a plantio direto durante oito anos. Os experimentos com soja, milho, arroz e feijão foram conduzidos em um Latossolo Roxo eutrófico no esquema de faixas e delineamento de blocos completos casualizados, com quatro repetições. Avaliou-se ainda o rendimento de grãos. Não houve resposta da soja aos diferentes manejos do solo nem aos níveis de adubação. Já a aração profunda resultou nos maiores rendimentos de milho, arroz e feijão, sendo intermediários os efeitos devidos à escarificação. Exceto para o feijão, nestas culturas também não se verificou efeito da adubação.The no-tillage cropping system is widely adopted in the Brazilian savannah region (cerrado. However, the continuous use of this system under tropical conditions with insufficient mulching and successive superficial fertilizations, can alter soil chemical and physical properties, causing problems of soil compaction and excessive accumulation of nutrients in the soil surface layer, decreasing the yield potential. The present study had as main objective to verify the effect of four systems (no tillage; heavy harrowing; deep chiseling and deep moldboard plowing of

Effects of tillage technologies and application of biopreparations on micromycetes in the rhizosphere and rhizoplane of spring wheat

Science.gov (United States)

Shirokikh, I. G.; Kozlova, L. M.; Shirokikh, A. A.; Popov, F. A.; Tovstik, E. V.

2017-07-01

The population density and structure of complexes of soil microscopic fungi in the rhizosphere and rhizoplane of spring wheat ( Triticum aestivum L.), plant damage by root rot and leaf diseases, and crop yield were determined in a stationary field experiment on a silty loamy soddy-podzolic soil (Albic Retisol (Loamic, Aric)) in dependence on the soil tillage technique: (a) moldboard plowing to 20-22 cm and (b) non-inversive tillage to 14-16 cm. The results were treated with the two-way ANOVA method. It was shown that the number of fungal propagules in the rhizosphere and rhizoplane of plants in the variant with non-inversive tillage was significantly smaller than that in the variant with plowing. Minimization of the impact on the soil during five years led to insignificant changes in the structure of micromycete complexes in the rhizosphere of wheat. The damage of the plants with root rot and leaf diseases upon non-inversive tillage did not increase in comparison with that upon plowing. Wheat yield in the variant with non-inversive tillage was insignificantly lower than that in the variant with moldboard plowing. The application of biopreparations based on the Streptomyces hygroscopicus A4 and Pseudomonas aureofaciens BS 1393 resulted in a significant decrease of plant damage with leaf rust.

Performance evaluation of snow and ice plows.

Science.gov (United States)

2015-11-01

Removal of ice and snow from road surfaces is a critical task in the northern tier of the United States, : including Illinois. Highways with high levels of traffic are expected to be cleared of snow and ice quickly : after each snow storm. This is ne...

ANALYSIS OF GENERAL PLOW BODY TRACTIVE RESISTANCE

Directory of Open Access Journals (Sweden)

A. Yu. Izmaylov

2016-01-01

Full Text Available Satellite monitoring and the fuel accounting is an urgent need for normal operation of motor transport. Introduction of a system activity with use of modern satellite technologies allows to lower transportation costs, to increase efficiency of use of agricultural machinery. The authors offered algorithm for modeling of technologies of a crop transportation from combine harvesters according to transfer schemes, with use of a loading crane based on the tractor-trailer and replaceable bodies. At application of the GLONASS system combines capacity grows with increase in length of furrow, and the quantity of re-loaders of different models significantly decreases. The more powerful of a re-loader is the fewer tracks are necessary due to their capacity increases. When yield increase by 2 t/ha the need for combines and re-loaders increases irrespective of their power. Rational forms of the organization of operations enable reduction of standing time of combines, increase capacity of transportation vehicles and by that grain loss reduction owing to reduction reducing of harvest terms. The problem of optimum construction and functioning of harvest and transport complexes of the agricultural enterprises with use of replaceable adapters and navigation satellite systems of GLONASS/GPS is actual. It is of major importance to national economy. The solution of this problem will make it possible firstly to raise effectiveness of performance of harvest and transport complexes because of reduction of standing time of machines and terms of harvesting and secondly to increase loading of domestic GLONASS system essential. The system of satellite monitoring with use of GLONASS data justifies costs of its installation and operation within 3-9 months that lowers the common costs of vehicle fleet by 30 percent.

Temporal flexibility of reproduction in temperate-breeding dabbling ducks

Science.gov (United States)

Krapu, Gary L.

2000-01-01

I compared nesting intervals during three consecutive years in five species of temperate-nesting dabbling ducks (Mallard [Anas platyrhynchos], Northern Pintail [Anas acuta], Northern Shoveler [Anas clypeata], Blue-winged Teal [Anas discors], Gadwall [Anas strepera]) and assessed whether differences existed in timing of refractoriness. Most nesting by females of all five species ended by the summer solstice. Nesting ended earliest for Northern Shovelers and Northern Pintails and latest for Gadwalls. Some Mallards, Blue-winged Teal, and Gadwalls continued to nest into mid- and late summer, whereas Northern Shovelers and Northern pintails did not. Mallards, Blue-winged Teal, and Gadwalls accounted for 99% (81 of 82) of flightless broods resulting from nests initiated during mid- or late summer in North Dakota and 98% (58 of 59) of flightless juveniles shot on or after 1 October by a random sample of duck hunters from across the United States. Early cessation of breeding by Northern Shovelers may have evolved in response to the species' limited flexibility in diet. Photorefractory mechanisms that limit most breeding to spring presumably evolved in response to severe constraints on reproductive success when nesting continued through summer(e.g. mortality of late-hatched young and molting females due to low temperatures). Interspecific differences in photosensitivity may account for variation in timing of cessation of nesting in late spring, but controlled experiments are needed to assess the possible role of non-photic influences. My results suggest that the refractory mechanisms controlling length of the breeding in temperate-nesting dabbling ducks are more varied and complex than previously thought, with non-photic influences (e.g. water conditions, food availability, food quality) having a larger role than indicated by earlier research.

Changes in Bone Mineral Density, Body Composition, Vitamin D Status, and Mineral Metabolism in Urban HIV-Positive South African Women Over 12 Months.

Science.gov (United States)

Hamill, Matthew M; Pettifor, John M; Ward, Kate A; Norris, Shane A; Prentice, Ann

2017-08-01

Human immunodeficiency virus (HIV) infection and antiretroviral therapy (ART) are associated with bone loss and poor vitamin D status in white populations, though their relative roles are not known. No previous studies have examined longitudinal changes in areal bone mineral density (aBMD), measured by dual-energy X-ray absorptiometry (DXA), or in vitamin D status in HIV-positive African women. Of 247 premenopausal, urban, black African women from Soweto, South Africa, initially recruited, 187 underwent anthropometry, DXA scanning and blood and urine collections at both baseline and 12 months. Of these, 67 were HIV-negative throughout (Nref), 60 were HIV-positive with preserved CD4 counts at baseline (Ppres), and 60 were HIV-positive with low CD4 counts at baseline, eligible for ART by South African standards of care at the time (Plow). No participant had been exposed to ART at baseline. By 12 months, 51 Plow women had initiated ART, >85% of whom took combined tenofovir disoproxil fumarate (TDF), lamivudine, and efavirenz. By 12 months, Plow and Nref, but not Ppres, increased in body weight and fat mass (group-by-timepoint p ≤ 0.001, p = 0.002, respectively). Plow had significant decreases in aBMD of 2% to 3%, before and after size adjustment, at the femoral neck (p ≤ 0.002) and lumbar spine (p ≤ 0.001), despite significant weight gain. These decreases were associated with increased bone turnover but there were no significant differences or changes over time in vitamin D status, serum phosphate concentrations, or renal phosphate handling. Excluding data from nine Plow women unexposed to ART and 11 Ppres women who had initiated ART accentuated these findings, suggesting the bone loss in Plow was related to ART exposure. This is the first study describing DXA-defined bone loss in HIV-positive Sub-Saharan African women in association with ART. Further work is required to establish if bone loss continues with ongoing ART and, if so, whether this

Functional Quality Criterion of Rock Handling Mechanization at Open-pit Mines

Directory of Open Access Journals (Sweden)

Voronov Yuri

2017-01-01

Full Text Available Overburden and mining operations at open-pit mines are performed mainly by powerful shovel-truck systems (STSs. One of the main problems of the STSs is a rather low level of their operating quality, mainly due to unjustified over-trucking. In this article, a functional criterion for assessing the qualify of the STS operation at open-pit mines is formulated, derived and analyzed. We introduce the rationale and general principles for the functional criterion formation, its general form, as well as variations for various STS structures: a mixed truck fleet and a homogeneous shovel fleet, a mixed shove! fleet and a homogeneous truck fleet, mixed truck and shovel fleets. The possibility of assessing the quality of the STS operation is of great importance for identifying the main directions for improving their operational performance and operating quality, optimizing the main performance indicators by the qualify criterion, and. as a result, for possible saving of material and technical resources for open-pit mining. Improvement of the quality of the STS operation also allows increasing the mining safety and decreasing the atmosphere pollution - by means of possible reducing of the number of the operating trucks.

A big step change : new mobile slurry preparation and crushing technology on the horizon

Energy Technology Data Exchange (ETDEWEB)

Budd, G.

2007-09-15

The efficiency and productivity of the trucks used in oil sands mining operations can be compromised by unstable terrain, and they consume large amount of fuel. Hydro-transport systems with slurry preparation facilities may soon eliminate the expenses associated with truck and shovel processes. The slurry preparation facilities use on-board reject handling systems to remove large pieces of ore that can't be used in crushers. However, they are hard to move. Researchers are now focusing on the development of a semi-mobile slurry preparation facility that uses mobile crushing and sizing equipment. The equipment uses large tractor tracks instead of wheels and tires, and can accomplish the same amount of work as 6 trucks. Using the system, mine scoop shovels dump ore into a hopper on the mobile unit. The ore is then conveyed to the mobile unit's onboard primary crusher or sizer. Staged crushing is combined with water addition and mixing at the mine site to prepare an oil and slurry ready for hydro-transport. It was concluded that the system may significantly reduce the use of shovel and truck operations in the oil sands industry. 2 figs.

Functional Quality Criterion of Rock Handling Mechanization at Open-pit Mines

Science.gov (United States)

Voronov, Yuri; Voronov, Artyoni

2017-11-01

Overburden and mining operations at open-pit mines are performed mainly by powerful shovel-truck systems (STSs). One of the main problems of the STSs is a rather low level of their operating quality, mainly due to unjustified over-trucking. In this article, a functional criterion for assessing the qualify of the STS operation at open-pit mines is formulated, derived and analyzed. We introduce the rationale and general principles for the functional criterion formation, its general form, as well as variations for various STS structures: a mixed truck fleet and a homogeneous shovel fleet, a mixed shove! fleet and a homogeneous truck fleet, mixed truck and shovel fleets. The possibility of assessing the quality of the STS operation is of great importance for identifying the main directions for improving their operational performance and operating quality, optimizing the main performance indicators by the qualify criterion, and. as a result, for possible saving of material and technical resources for open-pit mining. Improvement of the quality of the STS operation also allows increasing the mining safety and decreasing the atmosphere pollution - by means of possible reducing of the number of the operating trucks.

Research of Consumption of Biodiesel in Different Working Operations in the System of Precision Agriculture

Directory of Open Access Journals (Sweden)

Marek Angelovič

2012-05-01

Full Text Available The aim of study was to research the consumption of biodiesel in various working operations of the tractor John Deere 8230 with trailer and plow under field conditions. Biodiesel was made from agricultural crop of oilseed rape according to etherification. Experimental measurements were made on land of the Slovak University of Agriculture, in Kolíňany, Slovakia. The metering device was used EDMeco recorder and an electronic flow meter of the actual consumption of biodiesel. The measuring system was installed in the fuel system John Deere tractor, the 8230. On the base of the obtained results we can conclude that at the transportation of the tractor with trailer Mega 20 was the average hourly consumption of 15.43 liters of biodiesel. At the plowing with set of tractor and rotating 7-mouldboard plow Ostroj Opava, the average hourly consumption was of 33.93 liters of biodiesel.

Growth and yield of rain fed wheat as affected by different tillage system integrated with glyphosate herbicide

International Nuclear Information System (INIS)

Ali, S.; Malik, M.A.; Khan, M.A.

2016-01-01

In rainfed areas, tillage is primarily done for moisture conservation and weed control. However, excessive tilling not only harms the soil health but also increases the cost of production. To find out the sustainable and economical tillage combination, response of wheat was studied under different tillage systems integrated with glyphosate herbicide through field experiments conducted at University Research Farm of Pir Mehr Ali Shah, Arid Agriculture University Rawalpindi, Pakistan during 2012-2014 for two consecutive seasons. Principal component analysis proved that the plant height, biological yield, grain yield and harvest index of wheat were highest in treatment where one moldboard plowing was done followed by eight cultivations without using glyphosate in fallow period, which might be due to vigorous growth of wheat in this tillage system having enhanced root proliferation and moisture conservation, thus allowing plants to extract more nutrients and water from the deeper soil layers; whereas, the number of tillers per square meter, number of spikelets per spike, 1000 grain weight and number of grains per spike of wheat were maximum where one moldboard plowing was done followed by two applications of glyphosate herbicide in fallow period, which might be due to vigorous growth of wheat in this tillage system during 1st year of experiment when unexpected high rainfall was occurred during crop growth stage. Cluster analysis also categorized these two treatments into same category on the base of all agronomic parameters studied. The highest yield (3.5132 t ha-1) and (3.1242 t ha-1) was obtained from where one moldboard plowing was done following eight cultivations without using glyphosate followed by the treatment where one moldboard plowing was done following four cultivations without using glyphosate, respectively and were statistically at par with each other. Therefore one moldboard plowing following four cultivations is recommended for taking higher and

Soil preparation and nutrient losses by erosion in the culture cucumber

Directory of Open Access Journals (Sweden)

Amaral Sobrinho Nelson Moura Brasil do

2005-01-01

Full Text Available Minimum tillage reportedly reduce erosion, avoid soil degradation and improve crop productivity. This study aimed to determine how tillage operations may affect either nutrient accumulation or nutrient losses by erosion. The study was, carried out from December, 2000 to March, 2001, in the watershed of the Caetés River, in Rio de Janeiro State, Brazil (22º25'43"S, 43º25'07"W. The experiment was set up in sandy clay Kandiudult soil, 60% slope, under cucumber (Cucumis sativus L. crop. Soil samples were collected before planting and after harvest, on 22.0 X 4.0 m Greeoff plots. After each rainfall, fine sediments carried by runoff were deposited into two collecting tanks in a row, installed at the end of each plot, and were later dried, weighed and stored for analyses. Treatments (n = 4 were characterized by different tillage systems: (i downhill plowing followed by the burning of crop residues (DPB; (ii downhill plowing with no burning of the crop residues (DPNB; (iii animal traction contour plowing, with strips of guinea grass planted at a spacing of 7.0 m (AT; and (iv minimum tillage (MT. Samples of the soil-plowed layer were collected before planting and after harvest, between the rows and from the plants. Total concentration of Ca, Mg, K and P were determined after extraction with nitric perchloride digestion. Labile P and exchangeable K were extracted with the Mehlich 1 extractant solution. The MT system reduced losses of both exchangeable bases (15% and P (8%, and affected the distribution of labile and organic P. Crop residues left on soil surface in the MT system, resulted in increased organic matter content. Downhill plowing, the most used tillage operation in the region, resulted in the greatest losses of Ca, Mg, K, and P.

Choice of drilling equipment for surface mines of the Banovici and Djurdjevik coal basins

Energy Technology Data Exchange (ETDEWEB)

Kljucanin, T.; Cilovic, I.; Novak, I.; Tomic, R.

1988-07-01

Discusses factors influencing drilling equipment productivity at the Turija, Grivice and Potocari mines. When no reliable correlations were found in geomechanical analyses of overburden from different rigs, large-scale in field observations were made of overburden drilling. Four types of drilling equipment were in use in combination with 8 different shovel excavators (bucket capacity 5-20 m{sup 3}). Gives full details of the equipment considered and concludes by recommending the use of 110-115 mm diameter drilling equipment in combination with 8-9 m{sup 3} shovel excavators and also 150 mm diameter drilling equipment with larger capacity (18-20 m{sup 3}) excavators. 4 refs.

Genomes of rumen bacteria encode atypical pathways for fermenting hexoses to short-chain fatty acids

KAUST Repository

Hackmann, Timothy J.; Ngugi, David; Firkins, Jeffrey L.; Tao, Junyi

2017-01-01

Bacteria have been thought to follow only a few well-recognized biochemical pathways when fermenting glucose or other hexoses. These pathways have been chiseled in the stone of textbooks for decades, with most sources rendering them as they appear

Determination Of Longevity Of Teeth In Buckets Of Loading Equipment In Coal Mines - A Case Study

Directory of Open Access Journals (Sweden)

Aarif Jamal

2015-08-01

Full Text Available The life of bucket teeth in shovel and dragline deployed in handling of overburden rock is an important contributor to the stores cost and is also responsible for the loss of valuable availability and utilisation time of these critical equipment. To ascertain the effect of rock type on longevity of bucket teeth a study has been conducted in two large opencast mines of Singrauli Coalfields. The results of this study is presented in this paper. There was a significant variation as compared to the actual figures of the mine it establish useful relationship between the type of mineral present in the overburden and the life of bucket teeth of shovel and dragline.

soil failure crescent radii measurement for draft in tillage study

African Journals Online (AJOL)

user

1986-09-01

Sep 1, 1986 ... SCHOOL OF ENGINEERING AND ENGINEERING TECHNOLOGY. FEDERAL UNIVERSITY OF TECHNOLOGY. OWERRI. ABSTRACT. Field clay loam and sandy loam soils were tilled with a chisel .... modified earth moving equation proposed by Mckyes and All was: ... applications of analytical mechanics.

Research Article Special Issue

African Journals Online (AJOL)

2017-02-15

Feb 15, 2017 ... Bahar due to the relatively extensive knowledge of the past and the emotional ... the songs and the glories of ancient Iran have learned to regret: ... chisel and social chaos and weakness in the government was in the press.

Biomechanical modelling and evaluation of construction jobs for performance improvement.

Science.gov (United States)

Parida, Ratri; Ray, Pradip Kumar

2012-01-01

Occupational risk factors, such as awkward posture, repetition, lack of rest, insufficient illumination and heavy workload related to construction-related MMH activities may cause musculoskeletal disorders and poor performance of the workers, ergonomic design of construction worksystems was a critical need for improving their health and safety wherein a dynamic biomechanical models were required to be empirically developed and tested at a construction site of Tata Steel, the largest steel making company of India in private sector. In this study, a comprehensive framework is proposed for biomechanical evaluation of shovelling and grinding under diverse work environments. The benefit of such an analysis lies in its usefulness in setting guidelines for designing such jobs with minimization of risks of musculoskeletal disorders (MSDs) and enhancing correct methods of carrying out the jobs leading to reduced fatigue and physical stress. Data based on direct observations and videography were collected for the shovellers and grinders over a number of workcycles. Compressive forces and moments for a number of segments and joints are computed with respect to joint flexion and extension. The results indicate that moments and compressive forces at L5/S1 link are significant for shovellers while moments at elbow and wrist are significant for grinders.

Nitrogen Fertilizer Rate and Crop Management Effects on Nitrate Leaching from an Agricultural Field in Central Pennsylvania

Directory of Open Access Journals (Sweden)

Richard H. Fox

2001-01-01

Full Text Available Eighteen pan lysimeters were installed at a depth of 1.2 m in a Hagerstown silt loam soil in a corn field in central Pennsylvania in 1988. In 1995, wick lysimeters were also installed at 1.2 m depth in the same access pits. Treatments have included N fertilizer rates, use of manure, crop rotation (continuous corn, corn-soybean, alfalfa-corn, and tillage (chisel plow-disk, no-till. The leachate data were used to evaluate a number of nitrate leaching models. Some of the highlights of the 11 years of results include the following: 1 growing corn without organic N inputs at the economic optimum N rate (EON resulted in NO3–-N concentrations of 15 to 20 mg l-1 in leachate; 2 use of manure or previous alfalfa crop as partial source of N also resulted in 15 to 20 mg l-1 of NO3–-N in leachate below corn at EON; 3 NO3–-N concentration in leachate below alfalfa was approximately 4 mg l-1; 4 NO3–-N concentration in leachate below soybeans following corn was influenced by fertilizer N rate applied to corn; 5 the mass of NO3–-N leached below corn at the EON rate averaged 90 kg N ha-1 (approx. 40% of fertilizer N applied at EON; 6 wick lysimeters collected approximately 100% of leachate vs. 40–50% collected by pan lysimeters. Coefficients of variation of the collected leachate volumes for both lysimeter types were similar; 7 tillage did not markedly affect nitrate leaching losses; 8 tested leaching models could accurately predict leachate volumes and could be calibrated to match nitrate leaching losses in calibration years, but only one model (SOILN accurately predicted nitrate leaching losses in the majority of validation treatment years. Apparent problems with tested models: there was difficulty estimating sizes of organic N pools and their transformation rates, and the models either did not include a macropore flow component or did not handle macropore flow well.

Characterizing phosphorus dynamics in tile-drained agricultural fieldsof eastern Wisconsin

Science.gov (United States)

Madison, Allison; Ruark, Matthew; Stuntebeck, Todd D.; Komiskey, Matthew J.; Good, Laura W.; Drummy, Nancy; Cooley, Eric

2014-01-01

Artificial subsurface drainage provides an avenue for the rapid transfer of phosphorus (P) from agricultural fields to surface waters. This is of particular interest in eastern Wisconsin, where there is a concentrated population of dairy farms and high clay content soils prone to macropore development. Through collaboration with private landowners, surface and tile drainage was measured and analyzed for dissolved reactive P (DRP) and total P (TP) losses at four field sites in eastern Wisconsin between 2005 and 2009. These sites, which received frequent manure applications, represent a range of crop management practices which include: two chisel plowed corn fields (CP1, CP2), a no-till corn–soybean field (NT), and a grazed pasture (GP). Subsurface drainage was the dominant pathway of water loss at each site accounting for 66–96% of total water discharge. Average annual flow-weighted (FW) TP concentrations were 0.88, 0.57, 0.21, and 1.32 mg L−1 for sites CP1, CP2, NT, and GP, respectively. Low TP concentrations at the NT site were due to tile drain interception of groundwater flow where large volumes of tile drainage water diluted the FW-TP concentrations. Subsurface pathways contributed between 17% and 41% of the TP loss across sites. On a drainage event basis, total drainage explained between 36% and 72% of the event DRP loads across CP1, CP2, and GP; there was no relationship between event drainflow and event DRP load at the NT site. Manure applications did not consistently increase P concentrations in drainflow, but annual FW-P concentrations were greater in years receiving manure applications compared to years without manure application. Based on these field measures, P losses from tile drainage must be integrated into field level P budgets and P loss calculations on heavily manured soils, while also acknowledging the unique drainage patterns observed in eastern Wisconsin.

Long-term Differences in Tillage and Land Use Affect Intra-aggregate Pore Heterogeneity

International Nuclear Information System (INIS)

Kravchenko, A.N.; Wang, A.N.W.; Smucker, A.J.M.; Rivers, M.L.

2011-01-01

Recent advances in computed tomography provide measurement tools to study internal structures of soil aggregates at micrometer resolutions and to improve our understanding of specific mechanisms of various soil processes. Fractal analysis is one of the data analysis tools that can be helpful in evaluating heterogeneity of the intra-aggregate internal structures. The goal of this study was to examine how long-term tillage and land use differences affect intra-aggregate pore heterogeneity. The specific objectives were: (i) to develop an approach to enhance utility of box-counting fractal dimension in characterizing intra-aggregate pore heterogeneity; (ii) to examine intra-aggregate pores in macro-aggregates (4-6 mm in size) using the computed tomography scanning and fractal analysis, and (iii) to compare heterogeneity of intra-aggregate pore space in aggregates from loamy Alfisol soil subjected to 20 yr of contrasting management practices, namely, conventional tillage (chisel plow) (CT), no-till (NT), and native succession vegetation (NS). Three-dimensional images of the intact aggregates were obtained with a resolution of 14.6 (micro)m at the Advanced Photon Source, Argonne National Laboratory, Argonne, IL. Proposed box-counting fractal dimension normalization was successfully implemented to estimate heterogeneity of pore voxel distributions without bias associated with different porosities in soil aggregates. The aggregates from all three studied treatments had higher porosity associated with large (>100 (micro)m) pores present in their centers than in their exteriors. Pores 15 to 60 (micro)m were equally abundant throughout entire aggregates but their distributions were more heterogeneous in aggregate interiors. The CT aggregates had greater numbers of pores 15 to 60 (micro)m than NT and NS. Distribution of pore voxels belonging to large pores was most heterogeneous in the aggregates from NS, followed by NT and by CT. This result was consistent with presence of

Desempenho de um trator em função do tipo de pneu, da lastragem e da velocidade de trabalho Performance of an tractor as a function of tire type, ballasting and forward speed

Directory of Open Access Journals (Sweden)

Afonso Lopes

2005-04-01

Full Text Available O trabalho comparou o desempenho de um trator agrícola 4x2 TDA de 89 kW (121cv em função do tipo de pneus (radial, diagonal e de baixa pressão, a condição de lastragem (com e sem água nos pneus e quatro velocidades [V1 (1,84km h-1, V2 (3,18km h-1, V3 (4,57km h-1, V4 (5,04km h-1]. O experimento foi realizado na UNESP-Jaboticabal-SP, em condição de preparo do solo com escarificador de sete hastes a 30cm de profundidade. Os pneus foram do tipo R1, com as seguintes características: [radial (dianteiros-14.9 R 26; traseiros-620/75 R 30 diagonal (dianteiros-14.9-26, traseiros-23.1-30 e BPAF (dianteiros-500/60-26.5; traseiros-700/55-34]. O delineamento experimental foi blocos casualizados, em esquema fatorial 3x2x4, com 24 tratamentos e três repetições. Os resultados evidenciaram vantagens para o trator equipado com pneus radiais.The objective of this study was to compare the performance of the FWD agricultural tractor, equipped with three types of tires (bias ply, radial and low pressure, with and without tire water ballasting, operating in four forward speed. The research was carried out at UNESP, SP, Brazil, with the tractor pulling a chisel plow. A tractor with 89kW (121cv engine power equipped with FWD, was used in the experiment, and the tires used had the following characteristics: radial (front: 14.9R26 and rear: 620/75R30, bias ply (front: 14.9-26 and rear: 23.1-30 and low pressure (front: 500/60-26.5 and rear: 700/55-34. The experiment was conducted in a completely randomized block, design (3x2x4, with 24 treatments and three replications. The results evidenced advantages for the tractor equipped with radial tires.

A comparative study on the use of drilling and milling processes in ...

Indian Academy of Sciences (India)

(24 = 16 tests) was developed for each of the two cutting process. .... (DF) is defined by the ratio of maximum diameter (of damage zone around hole) to the ...... H 2003 The effect of chisel length and associated pilot hole on delamination when.

Bulletin of Materials Science | Indian Academy of Sciences

Indian Academy of Sciences (India)

Keywords. Ancient Indian copper; material characterization; electrochemical behaviour; rust analysis; corrosion rate. Abstract. A chalcolithic (2350–1800 BC) copper chisel from Balathal has been characterized by X-ray diffraction, microstructural and electrochemical methods. The surface patina was composed of sulfates ...

Cascading effect of economic globalization on human risks of scrub typhus and tick-borne rickettsial diseases.

Science.gov (United States)

Kuo, Chi-Chien; Huang, Jing-Lun; Shu, Pei-Yun; Lee, Pei-Lung; Kelt, Douglas A; Wang, Hsi-Chieh

2012-09-01

The increase in global travel and trade has facilitated the dissemination of disease vectors. Globalization can also indirectly affect vector-borne diseases through the liberalization of cross-border trade, which has far-reaching, worldwide effects on agricultural practices and may in turn influence vectors through the modification of the ecological landscape. While the cascading effect of economic globalization on vector-borne diseases, sometimes acting synergistically with regional agricultural policy, could be substantial and have significant economic, agricultural, and public health implications, research into this remains very limited. We evaluated how abandonment of rice paddies in Taiwan after joining the World Trade Organization, along with periodic plowing, an agricultural policy to reduce farm pests in abandoned fields can unexpectedly influence risks to diseases transmitted by ticks and chiggers (larval trombiculid mites), which we collected from their small-mammal hosts. Sampling was limited to abandoned (fallow) and plowed fields due to the challenge of trapping small mammals in flooded rice paddies. Striped field mice (Apodemus agrarius) are the main hosts for both vectors. They harbored six times more ticks and three times more chiggers in fallow than in plowed plots. The proportion of ticks infected with Rickettsia spp. (etiologic agent of spotted fever) was three times higher in fallow plots, while that of Orientia tsutsugamushi (scrub typhus) in chiggers was similar in both treatments. Fallow plots had more ground cover and higher vegetation than plowed ones. Moreover, ticks and chiggers in both field types were dominated by species known to infest humans. Because ticks and chiggers should exhibit very low survival in flooded rice paddies, we propose that farm abandonment in Taiwan, driven by globalization, may have inadvertently led to increased risks of spotted fever and scrub typhus. However, periodic plowing can unintentionally mitigate vector

Draught requirement of trailing foot and shallow injection equipment for applying slurry to grassland

NARCIS (Netherlands)

Huijsmans, J.F.M.; Hendriks, J.L.G.; Vermeulen, G.D.

1998-01-01

Surface spreading of slurry leads to the inevitable emission of ammonia into the environment. Injection of slurry on grassland reduces these emissions. However, injection of slurry by deep working injector tines with goose foot chisels (wings) requires high draught forces. This type of injection has

Experimental equipment for cutting friable marl layers. Probni uredjaj za sjecenje laporovito krtih stijena (laporaca)

Energy Technology Data Exchange (ETDEWEB)

Kljucanin, T.; Sejdinovic, A.; Miskic, D.; Tumenko, D. (Rudarski Institut, Tuzla (Yugoslavia))

1990-01-01

Describes the design of an experimental rock cutter to be attached to shovel excavators working on benches of surface mines. Pilot testing of the cutter will be carried out in marlstone overburden of the Banovici and Djurdjevik surface coal mines (Yugoslavia). The cutter is attached to the boom of a shovel excavator. Main components of the cutter are a frame with 3 hydraulic drills and hydraulic wedges. The 3 hydraulic drills are mounted on the frame in a line and spaced at 1.2 m. Borehole diameter is 150 mm. Metal wedges are hydraulically driven into the boreholes to slice the rock. The cutter is regarded as an alternative to the blasting of rock inclusions in overburden strata. 2 refs.

77 FR 16030 - FY2012 Supplemental Funding for Brownfields Revolving Loan Fund (RLF) Grantees

Science.gov (United States)

2012-03-19

... loan fund to enhance remediation and provide funds on a continuing basis; and (IV) Such other similar... be started and completed expeditiously (i.e. ``shovel-ready'' projects) and will lead to...

Dinâmica de populações e fitossociologia de plantas daninhas no cultivo do feijão-caupi e mandioca no sistema corte e queima com o uso de arado Phytosociology of weeds in cowpea and cassava crops under the slash-and-burn with plow

Directory of Open Access Journals (Sweden)

L.J.P Marques

2011-01-01

Full Text Available Este estudo investigou a composição florística das plantas daninhas em área queimada durante três anos agrícolas. A pesquisa foi conduzida no município de Zé Doca, Maranhão. O preparo da área no primeiro ano agrícola (2006/2007 foi realizado com corte e queima da vegetação para o cultivo de milho seguido do feijão-caupi. No segundo e no terceiro ano agrícola, o preparo da área consistiu de aração para o cultivo do milho seguido de mandioca (2007/2008 e depois para o feijão-caupi em sucessão à cultura de mandioca (2008/2009. A coleta das plantas daninhas ocorreu nas culturas de feijão-caupi e mandioca aos 30 e 60 dias após a semeadura (DAS, no primeiro e no segundo ano agrícola, respectivamente, e no feijão-caupi aos 30 DAS do terceiro ano agrícola, com retângulo (0,5 x 0,3 m lançado 10 vezes ao acaso na área cultivada. A cada lançamento, as plantas daninhas foram colhidas, para contagem, identificação, secagem e, assim, obter os índices fitossociológicos. O fogo reduziu a diversidade e o número das plantas daninhas. As espécies com maior valor de IVI foram Imperata brasiliensis, Sida glomerata e Corchorus argutus, após o fogo na cultura do feijãocaupi; e Juncus sp., Spermacoce verticillata, Aeschynomene americana e Cyperus sp., após preparo da área com aração nas culturas de mandioca e feijão-caupi. As plantas de capoeira ocorreram depois da queima, porém sua importância foi reduzida com o passar do tempo.This study investigated the floristic composition of weeds in a burnt area in Zé Doca, Maranhão, during three agricultural years. The preparation of the area at the first crop year (2006/ 2007 was by slash-and-burn for maize cultivation, followed by cowpea. In the second and third crop years, the preparation of the area consisted of plowing for maize cultivation, followed by cassava (2007/2008 and later, by cowpea in rotation with cassava (2008/2009. Weed collection in the cowpea and cassava crops

Dirty Oil and Shovel-Ready Jobs

Science.gov (United States)

Mac Phail, Abby

2012-01-01

In this article, the author describes a role-playing activity on tar sands and the proposed TransCanada Keystone XL pipeline. In this activity, students take on the characters of six key stakeholders invited to an imaginary public hearing to discuss whether or not the State Department and President Obama should approve the Keystone XL pipeline.…

The impact of the age of vines on soil hydraulic conductivity in vineyards in eastern Spain

NARCIS (Netherlands)

Alagna, Vincenzo; Prima, Di Simone; Rodrigo-Comino, Jesús; Iovino, Massimo; Pirastru, Mario; Keesstra, Saskia D.; Novara, Agata; Cerdà, Artemio

2017-01-01

Soil infiltration processes manage runoff generation, which in turn affects soil erosion. There is limited information on infiltration rates. In this study, the impact of vine age on soil bulk density (BD) and hydraulic conductivity (Ks) was assessed on a loam soil tilled by chisel plough. Soil

Design and test on 4B-1200 type bulbus fritillariae ussuriensis medicinal material harvester%4B-1200型平贝母药材收获机的设计与试验

Institute of Scientific and Technical Information of China (English)

宋江; 邱胜蓝; 王新忠

2015-01-01

at the above problems, the research team has been dedicated to the research on the fritillaria mechanical harvesting, focusing on the two key technologies containing level screening and mining technology of bulbus fritillariae ussuriensis. Sectional terms of mechanized harvesting method had been proposed in the past, and correspondingly level screening machinery and excavator of bulbus fritillariae ussuriensis had been developed, but the efficiency was low and the production cost was relatively high, so in order to solve these problems above, the fritillaria harvester matched with a walking tractor is designed in this study. The machine mainly consists of a scraping mechanism, a digging shovel, a vibration screen, below-sift separate shellfish and soil mechanism, bagging apparatus, transmission system, frame, land wheels and other key components. It is obtained by formula derivation that the width of bulldozing shovel is 1400 mm, the height of bulldozing shovel wing is 500 mm, the shovel wing surface radius is 400 mm, the shovel wing plane width is 120 mm, the shovel wing angle is 120°, the breaking ground angle is 65°, and the forward turning angle is 75°;and the shovel surface width of digging shovel is 1200 mm, the level inclination of shovel surface is 26°, the shovel surface is 140 mm long, the spacing of digging shovel’s end grid is 8 mm, and the grid length is 40 mm. By analyzing the four-bar mechanism based on analytical graphic method, it is determined that the speed range of vibration sieve crank is 240-535 rad/min and within this range the mixture of bulbus fritillariae ussuriensis and soil can pass successfully. It is shown by the force analysis of the reverse spiral blade that the spiral blade speed of soil separating part below sieve is less than 4 m/s. By means of UG (Unigraphics NX) software, the three-dimensional model of bulbus fritillariae ussuriensis medicinal materials harvester is programmed to assemble the parts and analyze the

Interim report - performance of laser and radar ranging devices in adverse environmental conditions

Energy Technology Data Exchange (ETDEWEB)

Nicholas Hillier; Julian Ryde; Eleonora WidzykCapehart; Graham Brooker; Javier Martinez; Andrew Denman [CSIRO (Australia)

2008-10-15

CSIRO in conjunction with CRC Mining and the Australian Centre for Field Robotics (ACFR) conducted a series of controlled experiments to examine the performance of three scanning range devices: two scanning infrared laser range finders and millimetrewave radar. Within the controlled environment, the performance of the devices were tested in various rain, mist and dustcloud conditions. Subsequently, these sensors were installed on a P&H 2800BLE electric rope shovel at the Bracalba Quarry, near Caboolture, Queensland, and the system performance was evaluated. The three scanning range sensors tested as part of this study were: 1. A Riegl LMSQ120 scanning laser range finder; 2. A SICK LMS291S05 scanning laser range finder; and, 3. ACFR's prototype 95GHz millimetrewave radar (2D HSS). The range data from these devices is to be used to construct accurate models of the environment in which the electric rope shovel operates and to, subsequently, make control decisions for its operation. Of the currently available range sensing technologies, it is considered that the infrared laser range finders and millimetrewave radar offer the best means of obtaining this data. This report summarises the results of both the controlled (laboratory) and field testing and presents key findings on sensor performance that are likely to impact the creation of digital models of the terrain surrounding a mining shovel.

Assessing the Soil Physiological Potential Using Pedo-Biological Diagnosis Under Minimum-Tillage System and Mineral Fertilization

Directory of Open Access Journals (Sweden)

Lazar Bireescu

2014-11-01

Full Text Available The main objective of sustainable agriculture is the protection of environment and natural vegetal and soil resources. Accordingly, the objective of this research was to assess the impact of technological systems by minimum tillage on soil biological activity, using the Pedo-Biological Diagnosis of Soil Resources. Our research was conducted on haplic chernozem from Experimental Station of UASVM of Iasi, Romania, during the seasonal dynamic, to the soybean crop, on unfertilized and fertilized agrofond, using moderate mineral doses (N80P80 as average of 2009–2010 period, under minimum tillage (2x disk, paraplow, chisel compared to conventional (plugging at 20 cm and 30 cm. In the case of soil works with chisel and paraplow without return of furrow, the Pedo-Biological Diagnosis highlights an increase of soil physiological potential, in the both variants (unfertilized and fertilized, unlike the method of alternating the depth of plugging that proved to be ineffective.

Interruption of the latency in seeds to inclination of technical nuclear

International Nuclear Information System (INIS)

Ramos Espinosa, K.A.; Damera Martinez, A.; Benito Zamora, E.; Vazquez Hernandez, L.

2001-01-01

The relatively long periods of cheats that it plows required to carry out the germination tests have blocked the progress toward the biggest efficiency in the obtaining of good plants for plantation and the it leaves operations. The long periods that plows required for the germination of many classes of seeds constitute one of the manifestations of the quality of latent that have some seeds. Leucaena seeds and Chinese pumpkin were studied for which it was possible to interrupt the latency and with this to be able to obtain bigger for hundred of germination in to term of briefer it cheats

Ghana Mining Journal - Vol 17, No 2 (2017)

African Journals Online (AJOL)

Mining and Metal Pollution: Assessment of Water Quality in the Tarkwa Mining ... Optimising Shovel-Truck Fuel Consumption using Stochastic Simulation · EMAIL ... of Surrogate Sulphides and Carbonaceous Matter in Refractory Gold Ores: ...

Build an Emergency Preparedness Kit

Science.gov (United States)

... In addition to the items listed above, a vehicle kit should include: -fire extinguisher. -booster cables and tow rope. -compass and road maps. -shovel. -tire repair kit and pump. -extra clothing to keep dry. - ...

Fire effects on rock images and similar cultural resources [Chapter 5

Science.gov (United States)

Roger E. Kelly; Daniel F. McCarthy

2012-01-01

Throughout human global history, people have purposely altered natural rock surfaces by drilling, drawing, painting, incising, pecking, abrading and chiseling images into stone. Some rock types that present suitable media surfaces for these activities are fine-grained sandstones and granites, basalts, volcanic tuff, dolomites, and limestones. Commonly called rock...

Translations on Eastern Europe Political, Sociological, and Military Affairs, Number 1354

Science.gov (United States)

1977-02-16

sheets, embroidery and uncomplicated items for en- terprises. The 8-year schools do not have production plans but they can boast about quite...well they handle the file and the chisel and how, from the skillful fingers of the girls, rich embroidery emerges; I look at the pretty little

21 CFR 872.4565 - Dental hand instrument.

Science.gov (United States)

2010-04-01

... chisel, endodontic broach, dental wax carver, endodontic pulp canal file, hand instrument for calculus... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Dental hand instrument. 872.4565 Section 872.4565...) MEDICAL DEVICES DENTAL DEVICES Surgical Devices § 872.4565 Dental hand instrument. (a) Identification. A...

MacDill Air Force Base: National Register Eligibility Recommendations for Sites 8HI50 and 8HI5656

National Research Council Canada - National Science Library

Gerrell, Philip

1997-01-01

...). The excavation methodology involved the hand excavation of systematically placed 50-x-5O-cm shovel tests and l-x-1-m excavation units to determine the horizontal and vertical dimensions of the site deposits...

Inoculum potential of Fusarium spp. relates to tillage and straw management in Norwegian fields of spring oats

Directory of Open Access Journals (Sweden)

Ingerd Skow Hofgaard

2016-04-01

Full Text Available The increased occurrence of Fusarium-mycotoxins in Norwegian cereals over the last decade, is thought to be caused by increased inoculum resulting from more cereal residues at the soil surface as a result of reduced tillage practices. In addition, weather conditions have increasingly promoted inoculum development and infection by Fusarium species. The objective of this work was to elucidate the influence of different tillage regimes (autumn plowing; autumn harrowing; spring plowing; spring harrowing on the inoculum potential (IP and dispersal of Fusarium spp. in spring oats. Tillage trials were conducted at two different locations in southeast Norway from 2010 to 2012. Oat residues from the previous year’s crop were collected within a week after sowing for evaluation. IP was calculated as the percentage of residues infested with Fusarium spp. multiplied by the proportion of the soil surface covered with residues. F. avenaceum and F. graminearum were the most common Fusarium species recovered from oat residues. The IP of Fusarium spp. was significantly lower in plowed plots compared to those that were harrowed. Plowing in either the autumn or spring resulted in a low IP. Harrowing in autumn was more effective in reducing IP than the spring harrowing, and IP levels for the spring harrowed treatments were generally higher than all other tillage treatments examined. Surprisingly low levels of F. langsethiae were detected in the residues, although this species is a common pathogen of oat in Norway. The percentage of the residues infested with F. avenaceum, F. graminearum, F. culmorum and F. langsethiae generally related to the quantity of DNA of the respective Fusarium species determined using qPCR. Fusarium dispersal, quantified by quantitative PCR analysis of spore trap samples collected at and after heading, generally corresponded to IP. Fusarium dispersal was also observed to increase after rainy periods. Our findings are in line with the

MATHEMATICAL MODEL AND METHODOLOGY FOR CALCULATION OF MINIMIZATION ON TURNING RADIUS OF TRACTOR UNIT WITH REPLACEABLE SUPPORTING AND MANEUVERING DEVICE

Directory of Open Access Journals (Sweden)

P. V. Zeleniy

2016-01-01

Full Text Available Smooth plowing with the help of reversible plows has replaced an enclosure method of soil treatment. The method may cause a formation of back ridges or open furrows. Due to this fact turnings of a tractor unit with a minimum radius required in order to ensure shuttle movements each time in the furrow of the preceding operating stroke have become a dominant type of turnings. Non-productive shift time is directly dependent on them and it is on the average 10–12 %, and it is up to 40 % in small contour areas with short run. Large non-productive time is connected with the desire to reduce headland width at field edges, and then a turning is made in several stages while using a complicated maneuvering. Therefore, an increase in efficiency of a plowing unit by means of minimization on its turning radius and execution of turning at one stage in the shortest possible time are considered as relevant objectives. In such a case it is necessary to take into account the fact that potential capabilities of universal tractors having established time-proved designs in respect of reduction of turning radius are practically at the end. So it is expedient to solve the matter at the expense of additional removable devices that ensure transformation of tractor wheel formula at the run end in order to reorient its position. Finally high quality plowing ensured by future-oriented reversible plows will be accompanied not only by output increase per shift, but also by decrease in headland width, their compaction and abrasion due to suspension systems and increase in productivity. The developed design having a novelty which proved by an invention patent and representing an additional supporting and maneuvering device significantly minimizes all the above-mentioned disadvantages and does not require any changes in tractor production design. Investigations have been carried on the following topic: “Minimization of turning radius for universal tractors by transformation

Inoculum Potential of Fusarium spp. Relates to Tillage and Straw Management in Norwegian Fields of Spring Oats

Science.gov (United States)

Hofgaard, Ingerd S.; Seehusen, Till; Aamot, Heidi U.; Riley, Hugh; Razzaghian, Jafar; Le, Vinh H.; Hjelkrem, Anne-Grete R.; Dill-Macky, Ruth; Brodal, Guro

2016-01-01

The increased occurrence of Fusarium-mycotoxins in Norwegian cereals over the last decade, is thought to be caused by increased inoculum resulting from more cereal residues at the soil surface as a result of reduced tillage practices. In addition, weather conditions have increasingly promoted inoculum development and infection by Fusarium species. The objective of this work was to elucidate the influence of different tillage regimes (autumn plowing; autumn harrowing; spring plowing; spring harrowing) on the inoculum potential (IP) and dispersal of Fusarium spp. in spring oats. Tillage trials were conducted at two different locations in southeast Norway from 2010 to 2012. Oat residues from the previous year’s crop were collected within a week after sowing for evaluation. IP was calculated as the percentage of residues infested with Fusarium spp. multiplied by the proportion of the soil surface covered with residues. Fusarium avenaceum and F. graminearum were the most common Fusarium species recovered from oat residues. The IP of Fusarium spp. was significantly lower in plowed plots compared to those that were harrowed. Plowing in either the autumn or spring resulted in a low IP. Harrowing in autumn was more effective in reducing IP than the spring harrowing, and IP levels for the spring harrowed treatments were generally higher than all other tillage treatments examined. Surprisingly low levels of F. langsethiae were detected in the residues, although this species is a common pathogen of oat in Norway. The percentage of the residues infested with F. avenaceum, F. graminearum, F. culmorum, and F. langsethiae generally related to the quantity of DNA of the respective Fusarium species determined using quantitative PCR (qPCR). Fusarium dispersal, quantified by qPCR analysis of spore trap samples collected at and after heading, generally corresponded to the IP. Fusarium dispersal was also observed to increase after rainy periods. Our findings are in line with the

[Effect of tillage patterns on the structure of weed communities in oat fields in the cold and arid region of North China].

Science.gov (United States)

Zhang, Li; Zhang, Li; Wu, Dong-Xia; Zhang, Jun-Jun

2014-06-01

In order to clarify the effects of tillage patterns on farmland weed community structure and crop production characteristics, based on 10 years location experiment with no-tillage, subsoiling and conventional tillage in the cold and arid region of North China, and supplementary experiment of plowing after 10 years no-tillage and subsoiling, oat was planted in 2 soils under different tillage patterns, and field weed total density, dominant weed types, weed diversity index, field weed biomass and oats yield were measured. The results showed that the regional weed community was dominated by foxtail weed (Setaira viridis); the weed density under long-term no-tillage was 2.20-5.14 times of tillage at different growing stages of oat, but there were no significant differences between conditional tillage and plowing after long-term no-tillage and subsoiling. Field weed Shannon diversity indices were 0.429 and 0.531, respectively, for sandy chestnut soil and loamy meadow soil under no-tillage conditions, and field weed biomass values were 1.35 and 2.26 times of plowing treatment, while the oat biomass values were only 2807.4 kg x hm(-2) and 4053.9 kg x hm(-2), decreased by 22.3% and 46.2%, respectively. The results showed that the weed community characteristics were affected by both tillage patterns and soil types. Long-term no-tillage farmland in the cold and arid region of North China could promote the natural evolution of plant communities by keeping more perennial weeds, and the plowing pattern lowered the annual weed density, eliminated perennial weeds with shallow roots, and stimulated perennial weeds with deep roots.

Land management influences trade-offs and the total supply of ecosystem services in alpine grassland in Tibet, China.

Science.gov (United States)

Wu, Junxi; Zhao, Yan; Yu, Chengqun; Luo, Liming; Pan, Ying

2017-05-15

Developing sustainable use patterns for alpine grassland in Tibet is the primary challenge related to conserving these vulnerable ecosystems of the 'world's third pole' and guaranteeing the well-being of local inhabitants. This challenge requires researchers to think beyond the methods of most current studies that are limited to a single aspect of conservation or productivity, and focus on balancing various needs. An analysis of trade-offs involving ecosystem services provides a framework that can be used to quantify the type of balancing needed. In this study, we measured variations in four types of ecosystem services under five types of grassland management including grazing exclusion, sowing, combined plowing and grazing exclusion, combined plowing and sowing, and natural grassland, from 2013 to 2015. In addition, we accessed the existence and changing patterns of ecosystem service trade-offs using Spearman coefficients and a trade-off index. The results revealed the existence of trade-offs among provisioning and regulating services. Plowing and sowing could convert the trade-off relationships into synergies immediately. Grazing exclusion reduced the level of trade-offs gradually over time. Thus, the combined plowing and sowing treatment promoted the total supply of multiple ecosystem services when compared with natural grassland. We argue that the variations in dry matter allocation to above- and belowground serve as one cause of the variation in trade-off relationships. Another cause for variation in trade-offs is the varied species competition between selection effects and niche complementarity. Our study provides empirical evidence that the effects of trade-offs among ecosystem services could be reduced and even converted into synergies by optimizing management techniques. Copyright © 2017 Elsevier Ltd. All rights reserved.

Ethno-management of plinthic and ironpan soils in the savanna ...

African Journals Online (AJOL)

Ethno-management of plinthic and ironpan soils in the savanna regions of West Africa. ... Ghana Journal of Agricultural Science ... tracts of land, the Zaï method of chiselling into the pan and growing crops in the pits is adopted These indigenous farmers' practices need scientific improvement to make them more effective.

Tillage and Water Deficit Stress Effects on Corn (Zea mays, L.) Root Distribution

Science.gov (United States)

One goal of soil management is to provide optimum conditions for root growth. Corn root distributions were measured in 2004 from a crop rotation – tillage experiment that was started in 2000. Corn was grown either following corn or following sunflower with either no till or deep chisel tillage. Wate...

Evaluation of soil and water salinity for irrigation in North-eastern ...

African Journals Online (AJOL)

GREG

2013-05-08

May 8, 2013 ... For sound land use and water management in irrigated area, knowledge of the chemical ... Nowadays, soil salinity has become important problem in irrigated ... hoe, shovel, plastic bags, hard paper or labeling, markers, rope,.

Systematic Approach to Identifying Deeply Buried Archeological Deposits

Science.gov (United States)

2018-02-01

Traditional methods used to discover archeological sites include pedestrian surface surveys and relatively shallow hand-dug shovel or soil core testing. While these methods are appropriate for locating surface and near-surface sites on ridges, hillto...

Preparing for Emergencies: A Checklist for People with Neuromuscular Diseases

Science.gov (United States)

... Blanket and first aid kit q Shovel q Tire repair kit, booster cables, pump and flares q ... P-527 6/11 TORNADO • FLASH FLOOD • EARTHQUAKE • WINTER STORM Preparing for Emergencies A Checklist for People ...

Environmental contaminants in oil field produced waters discharged into wetlands

International Nuclear Information System (INIS)

Ramirez, P. Jr.

1994-01-01

The 866-acre Loch Katrine wetland complex in Park County, Wyoming provides habitat for many species of aquatic birds. The complex is sustained primarily by oil field produced waters. This study was designed to determine if constituents in oil field produced waters discharged into Custer Lake and to Loch Katrine pose a risk to aquatic birds inhabiting the wetlands. Trace elements, hydrocarbons and radium-226 concentrations were analyzed in water, sediment and biota collected from the complex during 1992. Arsenic, boron, radium-226 and zinc were elevated in some matrices. The presence of radium-226 in aquatic vegetation suggests that this radionuclide is available to aquatic birds. Oil and grease concentrations in water from the produced water discharge exceeded the maximum 10 mg/l permitted by the WDEQ (1990). Total aliphatic and aromatic hydrocarbon concentrations in sediments were highest at the produced water discharge, 6.376 μg/g, followed by Custer Lake, 1.104 μg/g. The higher levels of hydrocarbons found at Custer Lake, compared to Loch Katrine, may be explained by Custer Lake's closer proximity to the discharge. Benzo(a)pyrene was not detected in bile from gadwalls collected at Loch Katrine but was detected in bile from northern shovelers collected at Custer Lake. Benzo(a)pyrene concentrations in northern shoveler bile ranged from 500 to 960 ng/g (ppb) wet weight. The presence of benzo(a)pyrene in the shovelers indicates exposure to petroleum hydrocarbons

Basic Hand Tools for Bricklaying and Cement Masonry [and] Basic Hand Tools of the Carpenter.

Science.gov (United States)

Texas A and M Univ., College Station. Vocational Instructional Services.

Intended for student use, this unit discusses and illustrates the tools used in brick and masonry and carpentry. Contents of the brick and masonry section include informative materials on bricklaying tools (brick trowels, joint tools, levels, squares, line and accessories, rules, hammers and chisels, tool kits) and cement masonry tools (tampers,…

African Journal of Neurological Sciences - 2009 Vol. 28 No 1

African Journals Online (AJOL)

with a periosteal elevator and a chisel inserted as levers above through the bone cut into the frontal sinus. Intersinus septa were broken. For small frontal sinus, bone flap extended beyond the limits of the sinus, including the external layer of the frontal vault cut tangentially. The mucous membranes of the sinus were.

The Cheops mystery targeted with neutrons

NARCIS (Netherlands)

Blaauw, M.; Van de Graaf, A.

2005-01-01

How the ancient Egyptians managed to raise a seven million tonne pyramid in a time span of only twenty years remains a mystery. Every now and then discussions flare up as to how exactly the pyramids at Giza in Egypt were constructed. How could they cut stone without the necessary chisels? How did

Browse Title Index

African Journals Online (AJOL)

Items 51 - 100 of 124 ... Vol 14 (2013), Measurement and Modelling of Blast Movement to Reduce Ore ... Vol 17, No 2 (2017), Optimising Shovel-Truck Fuel Consumption using ... Vol 15, No 1 (2015), Quality of Sachet Water Produced at Tarkwa, ...

Boundary conditions estimation of scoop dosimeter for primary sorting during earthworks

International Nuclear Information System (INIS)

Batij, V.G.; Pravdivyj, A.A.; Stoyanov, A.I.

2005-01-01

Simple method of radioactive waste first separation using collimated dosimeter, which is placed on boom of power shovel, is proposed, and separation process mathematic modeling for boundary conditions definition of sorting under 'Ukryttya' object high gamma background condition are carry out

Draft Environmental Impact Statement, West Bank Hurricane Protection Levee, Jefferson Parish, Louisiana.

Science.gov (United States)

1984-02-01

extensive fish- kills were observed within project area waterways during site investigations, sport fishing demand in the area remains high. No data is...Cardinalis cardinalis Northern house wren Troglodytes aedon Northern mockingbird Mimus polyglottos Northern parula Parula americana Northern shoveler

Effects of Mechanical Site Preparation on Growth of Oaks Planted on Former Agricultural Fields

Directory of Open Access Journals (Sweden)

John D. Hodges

2011-12-01

Full Text Available Mechanical site preparation is frequently proposed to alleviate problematic soil conditions when afforesting retired agricultural fields. Without management of soil problems, any seedlings planted in these areas may exhibit poor growth and survival. While mechanical site preparation methods currently employed in hardwood afforestation are proven, there is a substantial void in research comparing subsoiling, bedding, and combination plowing treatments. A total of 4,320 bare-root Nuttall oak (Quercus texana Buckley, Shumard oak (Quercus shumardii Buckley, and swamp chestnut oak (Quercus michauxii Nutt. seedlings were planted in February 2008 on three Mississippi sites. All sites were of comparable soils and received above average precipitation throughout the three-year duration of the study. Four site preparation treatments were replicated at each site, with 480 seedlings planted in each of nine replications, and a total of 1,440 seedlings per species planted across all sites. Mechanical treatments were installed using 3.1 m row centers, with treatments as follows: control, subsoiling, bedding, and combination plowing. Treatment effects on seedling height, groundline diameter (GLD, and survival were analyzed. Seedlings exhibited greater height in bedded and combination plowed areas (79.7 cm to 102.7 cm and 82.6 cm to 100.1 cm, respectively compared to subsoiled or control areas (70.4 cm to 84.6 cm and 71.4 cm to 86.9 cm, respectively. Greater GLD was observed in bedded and combination plowed areas (11.9 mm to 18.4 mm and 12.2 mm to 18.3 mm, respectively compared to subsoiled or control areas (10.2 mm to 14.6 mm and 10.5 mm to 15.6 mm, respectively. Survival was high for this study (94.%, and no differences were detected among treatments.

Characteristics of paddy operations with biodiesel fuelled tractor

Energy Technology Data Exchange (ETDEWEB)

Kim, Y.; Park, S.H.; Kim, C.K.; Im, D.H.; Kim, H.J.; Chung, S.C. [National Academy of Agricultural Science, Seodundong, Suwon (Korea, Democratic People' s Republic of); Kim, S.S. [Daedong Industrial Co., Chang Nyong-Kun, Kyungnam (Korea, Democratic People' s Republic of)

2010-07-01

This paper reported on a study in which biofuels were tested for their power and competitiveness in various paddy operations, such as plowing and rotary tilling of paddy fields. The study considered the use of diesel fuel as well as 20 per cent biodiesel (BD20) and 100 per cent biodiesel (BD100) as an alternative fuel for tractors. Ignition problems or abrupt stopping were not monitored during operations of plowing, rotary tilling and travelling on the road. According to tractor power take-off (PTO) test codes, there was no considerable power difference between the 3 fuels. However, fuel consumption rates were quite different between the biodiesels and diesel fuel in the paddy works. Fuel consumption increased when biodiesel content increased. Approximately 35 to 40 per cent more fuel was needed for rotary tilling operations than plowing operations. Within the operations, the maximum difference occurred during the rotary tilling of wet paddy fields. This difference was as high as 20 per cent , between BD100 and diesel fuel. In terms of exhaust gases, more carbon dioxide was discharged from diesel fuel than biodiesels, but more nitrous oxide was discharged with biodiesels. It was difficult to differentiate quantities of carbon monoxide between the 3 different fuels.

The Effect of Tillage on Organic Carbon Stabilization in Microaggregates in Different Climatic Zones of European Russia

Directory of Open Access Journals (Sweden)

Zinaida S. Artemyeva

2016-12-01

Full Text Available Tillage may affect the microstructural organization of soil, including the distribution of microaggregates with different mechanical strengths. We quantified the impact of tillage treatment on the amount and distribution of free organic matter, microaggregates (unstable and stable under low intensity sonification and their components, in the upper horizons of zonal soils of the Center of the Russian Plain. Under plowing, the carbon content decreases, both in unstable and stable microaggregates. The loss of carbon in unstable microaggregates was ~24%, whereas in stable microaggregates, it was ~37%, relative to native soils. The carbon content of organic (LFoc and organo-clay (Clayrd fractions in unstable microaggregates (CLFoc/CClayrd was almost identical in the upper horizons of native soils: the ratio of these components is for Albeluvisols (1.1, Phaeozem (0.8 and Chernozems (1.0. Under plowing, these decrease to: Albeluvisols and Chernozems (0.6 and Phaeozem (0.5. The shares of carbon accumulated within the unstable and stable microaggregates (Cunstable/Cstable are constant under equilibrium conditions and show a tendency to decrease from north to south on the order of: Albeluvisols and Phaeozem (2.2 > Chernozems (1.0. Under plowing, they increase to: Albeluvisols (3.0 and Phaeozem (3.2 > Chernozems (1.5.

Methods and costs for soil removal

International Nuclear Information System (INIS)

Toomey, J.E.

1979-12-01

Surface stabilization of outdoor radiation areas is discussed. Soil transport via shovel and box, dump truck, and scraper is described. Surface preparation includes application of herbicides, fertilizers and seeds. Finally, mulch is applied to hold the seed in place until it germinates

Archeological Testing of the World War II Prisoner-of-War Camp (5EP1211) at Fort Carson, El Paso County, Colorado

National Research Council Canada - National Science Library

Connor, Melissa

1999-01-01

.... Four one-meter test units were excavated along with 29 shovel tests in order to assess the potential for subsurface remains. The resulting recommendation is that the site no longer has the integrity to be eligible to the National register of Historic Places.

A grand experiment in shovel-ready science.

Science.gov (United States)

Eastman, Quinn

2010-07-23

The 2009 stimulus package released a burst of pent-up creativity in the applications submitted by US researchers, but there was a complicating factor with funding decisions: the need for quick results. Quinn Eastman provides a progress report. Copyright 2010 Elsevier Inc. All rights reserved.

Constituents in oil field produced waters discharged into the Loch Katrine wetland complex, Park County, Wyoming, and their bioconcentration in the aquatic bird food chain

International Nuclear Information System (INIS)

Ramirez, P. Jr.

1993-01-01

Trace elements, hydrocarbons and radium-226 concentrations were analyzed in water, sediment and biota from the Loch Katrine wetlands at Park County, WY in 1992. This study was designed to determine if produced waters pose a risk to aquatic birds inhabiting the wetlands. The radium-226 concentration recorded at the Sidney Battery Discharge in July, 93.7 pCi/l, exceeded WY DEQ's 60 pCi/l standard for the protection of aquatic life. Water quality acute criteria were exceeded for arsenic, Custer Lake, July, and for zinc, Sidney Battery discharge, April. Radium-226 concentrations in sediments from Custer Lake and Sidney Battery Discharge exceeded the 3 pCi/g background for Oregon Basin soils. The radium-226 concentration in aquatic vegetation, Custer Lake, 29.5 pCi/g, greatly exceeded the 2.9 pCi/g average concentration found in plants growing in uranium mill tailings in South Dakota. Radium-226 in aquatic vegetation may be available to aquatic birds. Oil and grease concentrations, Sidney Battery Discharge, exceeded the 10 mg/l standard of WY DEQ. Sediment hydrocarbon concentrations were highest at Sidney Battery Discharge, 6.376 μg/g, followed by Custer Lake, 1.104 μg/g. Benzo(a)pyrene was not detected in gadwalls from Loch Katrine but was detected in northern shovelers from Custer Lake. Benzo(a)pyrene concentrations in northern shoveler bile ranged from 500 to 960 ng/g (ppb) wet weight. Benzo(a)pyrene concentrations in shovelers is indicative of exposure to petroleum hydrocarbons

Integrated Palmer Amaranth Management in Glufosinate-Resistant Cotton: II. Primary, Secondary and Conservation Tillage

Directory of Open Access Journals (Sweden)

Michael G. Patterson

2013-01-01

Full Text Available A three year field experiment was conducted to evaluate the role of soil inversion, cover crops and spring tillage methods for Palmer amaranth between-row (BR and within-row (WR management in glufosinate-resistant cotton. Main plots were two soil inversion treatments: fall inversion tillage (IT and non-inversion tillage (NIT. Subplots were three cover treatments: crimson clover, cereal rye or none (i.e., winter fallow; and the sub subplots were four secondary spring tillage methods: disking followed by (fb cultivator (DCU, disking fb chisel plow (DCH, disking fb disking (DD and no tillage (NT. Averaged over years and soil inversion, the crimson clover produced maximum cover biomass (4390 kg ha−1 fb cereal rye (3698 kg ha−1 and winter fallow (777 kg ha−1. Two weeks after planting (WAP and before the postemergence (POST application, Palmer amaranth WR and BR density were two- and four-times less, respectively, in IT than NIT. Further, Palmer amaranth WR and BR density were reduced two-fold following crimson clover and cereal rye than following winter fallow at 2 WAP. Without IT, early season Palmer amaranth densities were 40% less following DCU, DCH and DD, when compared with IT. Following IT, no spring tillage method improved Palmer amaranth control. The timely application of glufosinate + S-metolachlor POST tank mixture greatly improved Palmer amaranth control in both IT and NIT systems. The highest cotton yields were obtained with DD following cereal rye (2251 kg ha−1, DD following crimson clover (2213 kg ha−1 and DD following winter fallow (2153 kg ha−1. On average, IT cotton yields (2133 kg ha−1 were 21% higher than NIT (1766 kg ha−1. Therefore, from an integrated weed management standpoint, an occasional fall IT could greatly reduce Palmer amaranth emergence on farms highly infested with glyphosate-resistant Palmer amaranth. In addition, a cereal rye or crimson clover cover crop can effectively reduce early season Palmer

Efeito de três sistemas de preparo do solo sobre a rentabilidade econômica da mandioca (Manihot esculenta Crantz = Effects of three tillage systems on economic profitability of cassava crop (Manihot esculenta Crantz

Directory of Open Access Journals (Sweden)

Manoel Genildo Pequeno

2007-07-01

Full Text Available O objetivo deste estudo foi avaliar a rentabilidade econômica da cultura damandioca em três sistemas de preparo de solo durante os anos agrícolas de 1999/2000 a2002/2003, em Araruna, Estado do Paraná. O delineamento experimental utilizado foi o deblocos completos casualizados, com oito repetições. Os tratamentos foram constituídos deplantio direto; preparo mínimo (escarificação e preparo convencional (aração + gradagemniveladora. A força de tração e o consumo de combustível requeridos nas operações depreparo do solo e de plantio da mandioca foram maiores no sistema de preparoconvencional. Os maiores custos com combustível, preparo do solo e plantio da mandioca, ecusto operacional relativo às culturas de inverno e à cultura da mandioca, bem como a maiorrenda bruta foram observados no sistema de preparo convencional, seguidos pelo preparomínimo e plantio direto. A maior renda líquida e a melhor relação benefício/custo foramobservadas no sistema de preparo convencional que proporcionou maior produtividade deraízes tuberosas em relação aos sistemas de preparo mínimo e de plantio direto.The objective of this paper was to evaluate the economicprofitability of cassava crop submitted to the three soil tillage systems during the years1999/2000 to 2002/2003, in Araruna, state of Parana. The treatments consisted of three soiltillage systems: no-tillage, minimum tillage using chiseling, and conventional tillage withmoldboard plow and disking, arranged in a randomized complete blocks with eightreplications. The traction strength and fuel consumption in the soil tillage and in the cassavasowed operation were more required in the conventional tillage system. The conventionaland the minimum tillage systems showed the highest costs for fuel, soil tillage and cassavasowed. They also presented the highest gross income. The greatest net income and the bestbenefit/cost relation were observed in the conventional tillage system, which

JPRS Report, Science & Technology, Europe.

Science.gov (United States)

1991-04-30

and 250 kilometers west of Ankara, magnesite is mined by blasting. Gigantic front loaders shovel the mixture of valuable material and ferruginous...fragments, in central and peripheral regulation of the endocrine system, in coordinating the nervous system integrative functions, and in the basic life

29 CFR 1915.1001 - Asbestos.

Science.gov (United States)

2010-07-01

..., disposal, storage, containment of and housekeeping activities involving asbestos or products containing... I, II, and III activities. Clean room means an uncontaminated room having facilities for the storage... system designed to capture the dust cloud created by the compressed air. (iii) Dry sweeping, shoveling or...

78 FR 16501 - Application for Final Commitment for a Long-Term Loan or Financial Guarantee in Excess of $100...

Science.gov (United States)

2013-03-15

... the transaction: To support the export of U.S. manufactured mining equipment and services to Mongolia... America. Obligor: Oyu Tolgoi LLC. Guarantor(s): N/A. Description of Items Being Exported Heavy mining trucks, shovels, drills, and other mining equipment, plus consulting and engineering services...

3 fIEL[) SQUAUR{~f SAle (ACf)

African Journals Online (AJOL)

of the Act into effect and the outbreak of war in August 1914 found the ...... artificial wall with danert wire to keep the animals in. ... have shovelled. We have schemed and forecast. .... 11th Lt Pryde and the Intelligence Officer of. 2/4. KAR left to ...

Our Accomplishments | NREL

Science.gov (United States)

and financial performance of proposed projects well before the first shovel hits the dirt. NREL's performance models with detailed financial models to help stakeholders in the industry make informed decisions person viewing a simulation at the ESIF. Cool ride: thermal management boosts EV performance Cool ride

Characterizing resilient behavior of naturally occurring bituminous sands for road construction

CSIR Research Space (South Africa)

Anochie-Boateng, Joseph

2010-11-01

Full Text Available large capacity haul trucks and shovels. This paper focuses on determining in laboratory the resilient behavior of three oil sand materials with bitumen contents of 8.5, 13.3, and 14.5% by weight. The resilient modulus MR properties were obtained using a...

Understanding hydrotransport : the key to Syncrude's success

International Nuclear Information System (INIS)

Paine, R.B.; Wright, B.M.

1998-01-01

Syncrude's use of pipeline slurries to convey oilsand from its Athabasca deposit to the extraction plant marks the beginning of a new era in oilsand processing. With this new conveyance system Syncrude plans to phase out the dragline, bucketwheel reclaimer, and conveyor ore mining and delivery system in favour of shovel, truck, and hydrotransport technology. Shovels will be used to mine the ore in a conventional open pit bench mining scheme. The oilsand will then be loaded onto trucks, hauled to a crusher for sizing and fed into the hydrotransport system where it will be slurried with water and caustic soda and pumped to the extraction plant by pipeline. The advantages of hydrotransport include significant energy savings and considerably less plant infrastructure. A new method to describe the source ore characteristics and plant performance was also developed. The use of this information system within the corporation is described. 7 refs., 3 figs

Performance Measurement of Mining Equipments by Utilizing OEE

Directory of Open Access Journals (Sweden)

Sermin Elevli

2010-10-01

Full Text Available Over the past century, open pit mines have steadily increased their production rate by using larger equipments which requireintensive capital investment. Low commodity prices have forced companies to decrease their unit cost by improving productivity. Oneway to improve productivity is to utilize equipment as effectively as possible. Therefore, the accurate estimation of equipmenteffectiveness is very important so that it can be increased. Overall Equipment Effectiveness (OEE is a well-known measurementmethod, which combines availability, performance and quality, for the evaluation of equipment effectiveness in manufacturing industry.However, there isn’t any study in literature about how to use this metric for mining equipments such as shovel, truck, drilling machineetc. This paper will discuss the application of OEE to measure effectiveness of mining equipment. It identifies causes of time losses forshovel and truck operations and introduces procedure to record time losses. The procedure to estimate OEE of shovels and trucks hasalso been presented via numerical example.

Current status of thin seam longwall mining in the US

Energy Technology Data Exchange (ETDEWEB)

Peng, S.S. [West Virginia Univ., Morgantown, WV (United States); Orndorff, A.

1996-12-31

Thin seams in this paper refers to those seams the economic mining height of which is below 50-55 in. that are traditionally considered to be the proprietary of plowing and present a whole net set of problems for longwall mining. In thin seams it is difficult to design and manufacture an efficient high capacity cutting machine for maintenance and production operations. Thin seam mining by longwall plowing began in the late fifties in southern West Virginia, and continues to the present time. In the seventies when longwall mining began to take off a large percentage of U.S. longwalls were operating in the thin seams. Tables 1 and 2 show the historical trends of cutting machines used for seams less than 55 in and 50 in, respectively. In addition to the plow system, the single-ended fixed drum and single-ended ranging drum shearers were introduced in the mid and late seventies and operated continuously until 2-4 years ago. The double-ended ranging drum shearers have also been employed for thin seam longwall mining during this period including several in-web (or off-pan) shearers between late seventies and early eighties. In this paper three thin-seam longwalls in three states employing the latest thin-seam longwall technology will be reviewed. However only two of them are still in operation while the third one ceased operation recently.

Effects of foreign object damage from small hard particles on the high-cycle fatigue life of titanium-(6)aluminum-(4)vanadium

Science.gov (United States)

Hamrick, Joseph L., II

Thin rectangular samples of Ti-6Al-4V were damaged by four methods to represent foreign object damage found in turbine engine blades: (1) impact with 2 mm. and 5 mm diameter glass spheres at 305 m/s, (2) impact with 2 mm and 4 mm diameter steel spheres at 305 m/s, (3) quasi-static displacement controlled indentation using steel chisels with 1 mm, 2 nun and 5 mm diameter tips and (4) shearing notches with a 2 mm. diameter chisel point under a quasi-static loading condition. Finite element analysis was used to study the relationship between the stress state created by the plastic damage and the fatigue strength. A new method of quantifying the amount of plastic damage from multiple methods was developed. The fatigue strength required for crack initiation at 10E7 cycles was found to be a function of the total depth from the edge of the undeformed specimen up to the end of the plastically deformed zone. For damage depths less than 1750 mum, the reduction in fatigue strength is proportional to the depth of total damage. For depths > 1750 mum, there appears to be a threshold value of fatigue strength.

Swine slurry application and soil management on double-cropped oat/maize

Directory of Open Access Journals (Sweden)

Marlo Adriano Bison Pinto

2014-06-01

Full Text Available The swine production in southern Brazil is concentrated in small farms that use residues as a nutrient source for crops of economic interest. This study aimed to evaluate the use of swine slurry associated with tillage systems on double-cropped oat/maize. The experiment was carried out in the 2009/2010 and 2010/2011 cropping seasons, in Taquaruçu do Sul, Rio Grande do Sul State, Brazil. The experimental design was randomized blocks in a factorial scheme, with four replications. Treatments consisted of the interaction of four swine slurry doses (no swine slurry, 20 m3 ha-1, 40 m3 ha-1 and 80 m3 ha-1 and mineral fertilization, in three tillage systems (no-tillage, chiseling and chiseling + disking. The swine slurry application on doublecropped oat/maize increased the dry matter and grain yield. The 80 m3 ha-1 dose provided a response statistically similar to the mineral fertilization recommended for maize. The interaction between the 80 m3 ha-1 dose and the immediate incorporation of slurry into the soil reduced N losses by ammonia volatilization, promoting a significant increase in maize grain yield, when grown on a clayish soil.

Shear Strengthening of RC Beams Using Sprayed Glass Fiber Reinforced Polymer

Directory of Open Access Journals (Sweden)

Sayed Mohamad Soleimani

2012-01-01

Full Text Available The effectiveness of externally bonded sprayed glass fiber reinforced polymer (Sprayed GFRP in shear strengthening of RC beams under quasi-static loading is investigated. Different techniques were utilized to enhance the bond between concrete and Sprayed GFRP, involving the use of through bolts and nuts paired with concrete surface preparation through sandblasting and through the use of a pneumatic chisel prior to Sprayed GFRP application. It was found that roughening the concrete surface using a pneumatic chisel and using through bolts and nuts were the most effective techniques. Also, Sprayed GFRP applied on 3 sides (U-shaped was found to be more effective than 2-sided Sprayed GFRP in shear strengthening. Sprayed GFRP increased the shear load-carrying capacity and energy absorption capacities of RC beams. It was found that the load-carrying capacity of strengthened RC beams was related to an effective strain of applied Sprayed GFRP. This strain was related to Sprayed GFRP configuration and the technique used to enhance the concrete-FRP bond. Finally, an equation was proposed to calculate the contribution of Sprayed GFRP in the shear strength of an RC beam.

40 CFR Appendix II to Subpart S of... - As-Received Testing Vehicle Rejection Criteria

Science.gov (United States)

2010-07-01

... (CONTINUED) General Compliance Provisions for Control of Air Pollution From New and In-Use Light-Duty... vehicle has been used for severe duty (trailer towing for passenger cars, snow plowing, racing) 4. The...

Diesel Engine Technician

Science.gov (United States)

Tech Directions, 2010

2010-01-01

Diesel engine technicians maintain and repair the engines that power transportation equipment such as heavy trucks, trains, buses, and locomotives. Some technicians work mainly on farm machines, ships, compressors, and pumps. Others work mostly on construction equipment such as cranes, power shovels, bulldozers, and paving machines. This article…

Impact of conservation agriculture on harnessing sustainability and building resilience against land degradation in the northern Ethiopian highlands

Science.gov (United States)

Araya, Tesfay; Cornelis, Wim M.; Govaerts, Bram; Bauer, Hans; Deckers, Jozef; Nyssen, Jan

2013-04-01

Conservation Agriculture (CA) aims at improving soil quality and crop yield whilst reducing runoff and topsoil erosion which raises the soil resilience to combat soil degradation. Different chemical, physical, and biological properties of a soil interact in complex ways that determine the crop productivity potential of the soil. Hence, a medium-term tillage experiment was carried out (2005 to 2011) on a Vertisol to evaluate changes in soil quality, runoff and soil loss due to CA-based field conservation practices in northern Ethiopia. The experimental layout was implemented in a randomized complete block design with three replications on permanent plots of 5 m by 19 m. The tillage treatments were derdero+ (DER+) with a furrow and permanent raised bed planting system, plowed once at planting by refreshing the furrow and with 30% standing crop residue retention, terwah+ (TER+) with plowing once at planting with 30% standing crop residue retention and contour furrows made at 1.5 m distance interval, and conventional tillage (CT) with a minimum of three tillage operations and removal of crop residues. All the plowing and reshaping of the furrows was done using the local ard plow mahresha. Local crop rotation practices followed during the seven years sequentially from the first to the seventh year included wheat-teff-wheat-barley-wheat-teff-grass pea. Glyphosate was sprayed starting from the third year (2007) at 2 l ha-1 before planting to control pre-emergent weed in DER+ and TER+. Significantly different (pindex, consistency index, cone index, air capacity and macroporosity were shown to significantly increase in soils subjected to DER+ planting system compared to CT, specifically at 0-10 cm depth. Aggregate instability index, crack size at harvest, relative water capacity and plastic limit were significantly larger in CT compared to CA treatments. Adoption of improved local practices of DER+ and TER+ planting systems that employ conservation agriculture principles

Straight Talk About Migraines, Cindy McCain Speaks Out | NIH MedlinePlus the Magazine

Science.gov (United States)

... advocate for children and chair of a major business, traveling across this country and around the world. ... It's much more than that. They have the idea that you can plow through this, and you ...

Guide to request license for teletherapy practice

International Nuclear Information System (INIS)

2000-01-01

In this work the steps to request license for teletherapy practice are described , among these steps they it continued it plows to request the qualified personnel's yams, the operation authorization, application purpose, license type

Tillage practices and identity formation in High Plains farming

DEFF Research Database (Denmark)

Strand, Katherine; Arnould, Eric; Press, Melea

2014-01-01

farming, recognition and denunciation of other farmers’ practices, and recognition and justification of their own contribute to identity formation. This research contributes to the ongoing discussion of how identity is formed through day-to-day activities in the material world. The plow creates divisions...... landscape. Specifically, they compare conservation tillage wedded to ‘modern’ ideologies of scientific farming with conventional tillage newly linked to beliefs about both organic and traditional farming, and examine how farmers use these different forms of tillage to create their identities. Roadside...... in the High Plains community between organic farmers who continue to rely on this implement in their material engagement with the land and the chemical farmers who distance their practices from the plow as they distinguish themselves as stewards of the soil....

Balanço de nutrientes em povoamento de Eucalyptus saligna implantado sobre Cambissolo Háplico no RS Nutrient balance in plantation of Eucalyptus saligna planted on Inceptisol in Rio Grande do Sul

Directory of Open Access Journals (Sweden)

Michael Mazurana

2011-09-01

Full Text Available A fragilidade de um sistema florestal pode ser avaliada através do balanço de nutrientes, destacando a eficiência da ciclagem sendo que, em certos casos, a adubação deve ser utilizada para manter ou elevar a produtividade do sistema. Objetivou-se com este estudo avaliar o comportamento de diferentes sistemas de preparo de solo em Cambissolo Háplico e sua influência nas perdas de nutrientes transportados por erosão em área cultivada com Eucalyptus saligna. Os tratamentos foram constituídos por quatro métodos de preparo do solo: subsolagem interrompida com resíduo (SIR, subsolagem contínua com resíduo (SCR, subsolagem contínua sem resíduo (SSR e coveamento mecânico (CME, em delineamento de blocos ao acaso com três repetições por tratamento. O sistema SSR apresentou as maiores perdas de nutrientes quando comparadas com as dos outros métodos de preparo de solo. As maiores perdas de nutrientes pela erosão hídrica foram, pela ordem, K > Ca > Mg > P > Cu > B. Os sistemas de preparo SIR e SSR apresentaram os maiores teores de nutrientes contidos na parte aérea e o menor balanço nutricional, respectivamente.The forest system fragility can be evaluated through nutrient balance, with an emphasis in the cycling efficiency to maintain or elevate of productivity of system. The objective of this study was to evaluate the effects of different soil tillage systems on nutrient losses transported by erosion on an Inceptisol with Eucalyptus saligna. Four tillage systems were tested: interrupted deep chiseling with residue (SIR, continuous deep chiseling with residue (SCR, continuous deep chiseling without residue (SSR and mechanical pitting (CME. The SIR system showed the greatest nutrient losses. The loss of nutrients was higher by water erosion, in the following order, K > Ca > Mg > P > Cu > B. SIR and SSR tillage systems had the highest levels of nutrients in shoots and lower nutritional balance, respectively.

The first cut-off wall in the Indian Himalayas for the dam of the Dhauliganga hydroelectric project

Energy Technology Data Exchange (ETDEWEB)

Brunner, W.G. [Bauer Maschinen GmbH, Berlin (Germany)

2006-07-01

This paper provided details a Bauer cutter used to build a cut-off wall for the Dhaulinganga power plant project in the Himalayan mountains. The dam for the project was built as a 56 m high concrete-faced rockfill dam with a length of 270 m at the crown. A cut-off wall was constructed on the upstream side of the dam extending down from the dam's plinth to the bedrock level. A Bauer cutter was used to key the cut-off wall straight into the bedrock, which omitted the need for a grout curtain. The cut-off wall is 1 m thick and 70 m deep, with a total area of 8000 m{sup 2}. The wall was constructed as a series of primary and secondary panels. Excavation of the panels was carried out in single bites by the Bauer DHG hydraulic diaphragm wall grabs, supported a box chisel, cross chisel and a Bauer BC 40 rock cutter. Trench stability was provided by bentonite slurry. The closing forces were activated by a cylinder which was installed vertically inside the base body. The Bauer cutter continuously removed soil and rock from the bottom of the trench for mixing with the bentonite slurry. The slurry was then pumped through a ring main of hose pipes to a desanding plant where it was cleaned and returned to the trench. Advantages offered by using the cutter included a consistently high output, an extremely high degree of verticality, watertight joints, and the ability to cut through hard boulders. Use of the cutter at the Dhaulinganga site showed that the project could not be carried out successfully without the use of the cutter, which was used whenever grab and chisel methods were unable to achieve satisfactory rates of penetration. Deployment of the cutter was essential to key the cut-off wall into the underlying bedrock. It was concluded that the Dhualinganga project will provide a model for future power generation projects in the Indian Himalayas. 11 figs.

105-116 Effect of Winged Subsoiler and Traditional Tillage ...

African Journals Online (AJOL)

3) compared to traditional tillage (Qs = 34 mm-season-. 1, T = 49 ... Maresha plow that cuts soil deeper than achieved with the traditional .... Data Processing and Analysis. Statistical ... soil compaction and shallow depth could be addressed.

Influence of Conservation Tillage on some Soil Physical Properties and Crop Yield in Vetch-Wheat Rotation in Dryland Cold Region

Directory of Open Access Journals (Sweden)

I Eskandari

2017-10-01

Full Text Available Introduction Winter wheat is an important, well-adapted grain crop under dryland condition of the northwest of Iran. Soil water is the most limiting resource for crop growth in dryland areas. Therefore, farmers need to use crop residues and minimum tillage to control the soil erosion and effectively store and to use the limited precipitation received for crop production. Crop rotation and tillage system could affect crop yield due to their effects on water conservation and soil chemical and physical properties. Galantini et al., (2000 studied the effect of crop rotation on wheat productivity in the Pampean semi-arid region of Argentina and found that a wheat–vetch (Vicia sativa L. rotation resulted in higher yield and protein content, and greater yield components than the other rotations.Payne et al. (2000 stated that where precipitation amount is marginal (400 mm, dry field pea offers a potential alternative to summer fallowing. The purpose of this study was to identify the optimal tillage system for increasing crop productivity in a vetch–wheat rotation in dryland farming of the northwest of Iran. Materials and Methods The field experiment was carried out from 2010 to 2014 at the Dryland Agricultural Research Station (latitude37° 12´N; longitude 46◦20´E; 1730 m a.s.l., 25 km east of Maragheh, East Azerbaijan Province, Iran. The long-term (10 years average precipitation, temperature and relative humidity of the station are 336.5 mm, 9.4 ◦C and 47.5%, respectively. The soil (Fine Mixed, Mesic, Vertic Calcixerepts, USDA system; Calcisols, FAO system at the study site had a clay loam texture in the 0–15 cm surface layer and a clay texture in the 15–80 cm depth. This study was conducted in vetch (Vicia pannonica- wheat (Triticum aestivum L. rotation. The experiment was arranged in a randomized complete block design with four replications. The tillage treatments consisted of (1 conventional tillage: moldboard plowing followed by one

CNA Maritime Asia Project. Workshop One: The Yellow and East China Seas

Science.gov (United States)

2012-05-01

in 2011.8 In October, South Korean Coast Guard forces used tear gas and rubber bullets to subdue Chinese fishermen wielding clubs and shovels.9 An...tation Disputes in the East China Sea,” NBR Special Report No.35 (December 2011): 135 and 141. 39 CNA Maritime Asia Project Workshop One: The Yellow

29 CFR 1926.602 - Material handling equipment.

Science.gov (United States)

2010-07-01

... covered in Power Crane and Shovel Associations Standards No. 1 and No. 2 of 1968, and No. 3 of 1969, shall be complied with, and shall apply to cranes, machines, and attachments under this part. (c) Lifting... vertical and horizontal controls elevatable with the lifting carriage or forks for lifting personnel, the...

Another punch in the wall (Part 2)

Energy Technology Data Exchange (ETDEWEB)

Przhedetsky, B. [Rock Ignition Pty Ltd. (Australia)

2009-09-15

Based on feedback from readers to the story of coal mining extraction techniques in the July-August 2009 edition of this journal the overview is continued and more detail is given on certain methods and equipment used. Section headings are: draglines; bucket wheel excavators; truck and shovel; overburden slusher; and underground gasification.

Snow model analysis.

Science.gov (United States)

2014-01-01

This study developed a new snow model and a database which warehouses geometric, weather and traffic : data on New Jersey highways. The complexity of the model development lies in considering variable road : width, different spreading/plowing pattern...

Impacts of conservation tillage on the hydrological and agronomic performance of Fanya juus in the upper Blue Nile (Abbay river basin

Directory of Open Access Journals (Sweden)

H. H. G. Savenije

2012-12-01

Full Text Available Adoption of soil conservation structures (SCS has been low in high rainfall areas of Ethiopia mainly due to crop yield reduction, increased soil erosion following breaching of SCS, incompatibility with the tradition of cross plowing and water-logging behind SCS. A new type of conservation tillage (CT involving contour plowing and the construction of invisible subsoil barriers using a modified Maresha winged "subsoiler" is suggested as a means to tackle these problems as an integral part of the SCS. We investigated the effect of integrating the CT with SCS on the surface runoff, water-logging, soil loss, crop yield and plowing convenience. The new approach of conservation tillage has been compared with traditional tillage (TT on 5 farmers' fields in a high rainfall area in the upper Blue Nile (Abbay river basin. Test crops were wheat [triticum vulgare] and tef [eragrostis tef]. Farmers found CT convenient to apply between SCS. Surface runoff appeared to be reduced under CT by 48 and 15%, for wheat and tef, respectively. As a result, CT reduced sediment yield by 51 and 9.5%, for wheat and tef, respectively. Significantly reduced water-logging was observed behind SCS in CT compared to TT. Grain yields of wheat and tef increased by 35 and 10%, respectively, although the differences were not statistically significant apparently due to high fertility variations among fields of participating farmers. Farmers who tested CT indicated that they will continue this practice in the future.

Surface Runoff and Snowmelt Infiltration into the Soil on Plowlands in the Forest-Steppe and Steppe Zones of the East European Plain

Science.gov (United States)

Barabanov, A. T.; Dolgov, S. V.; Koronkevich, N. I.; Panov, V. I.; Petel'ko, A. I.

2018-01-01

Long-term series of observations over the spring water balance elements on fields with hydrologically contrasting agricultural backgrounds―a loose soil after fall moldboard plowing and a plowland compacted by 12-16% compared to the former soil (perennial grasses, winter crops, stubble)―have been analyzed. The values of surface runoff and water infiltration into the soil in the steppe and forest-steppe zones of European Russia have been calculated for the spring (flooding) period and the entire cold season. The hydrological role of fall plowing has been shown, and water balance elements for the current (1981-2016) and preceding (1957-1980) periods have been compared. A significant decrease in runoff and an increase of water reserve in the soil have been revealed on all plowland types. Consequences of changes in the spring water balance on plowland have been analyzed.

Swarm Verification

Science.gov (United States)

Holzmann, Gerard J.; Joshi, Rajeev; Groce, Alex

2008-01-01

Reportedly, supercomputer designer Seymour Cray once said that he would sooner use two strong oxen to plow a field than a thousand chickens. Although this is undoubtedly wise when it comes to plowing a field, it is not so clear for other types of tasks. Model checking problems are of the proverbial "search the needle in a haystack" type. Such problems can often be parallelized easily. Alas, none of the usual divide and conquer methods can be used to parallelize the working of a model checker. Given that it has become easier than ever to gain access to large numbers of computers to perform even routine tasks it is becoming more and more attractive to find alternate ways to use these resources to speed up model checking tasks. This paper describes one such method, called swarm verification.

The influence of complex compost on the aggregate composition and water and air properties of an ordinary chernozem

Science.gov (United States)

Belyuchenko, I. S.; Antonenko, D. A.

2015-07-01

The influence of complex compost composed of the waste products of the agriculture (semi-rotted cattle manure and plant residues) and chemical industries (phosphogypsum) on the agrophysical properties of an ordinary chernozem (Haplic Chernozem) was studied in the western Ciscaucasian region. In the field experiment, the compost was applied to the plow layer (0-20 cm) in 2007. In five years, the content of agronomically valuable aggregates increased by 7-9%, and their water stability became higher. This resulted in a better aggregation of the plow layer; its bulk density decreased by about 0.1 g/cm3 in comparison with the control plot treated with mineral fertilizers according to traditional technology. The water and air properties of the soil were optimized, which was seen from an increase in the field and total water capacity, total porosity, and soil water storage.

Development stage of computerization and automation of machines and equipment used at longwall faces in Polish mines. Sostoyanie rabot po ehlektronizatsii i avtomatizatsii mashin i oborudovaniya, ustanavlivaemogo v lave i primenyaemogo v Pol'skikh shakhtakh

Energy Technology Data Exchange (ETDEWEB)

Sobchik, Yu; Pan' kuv, A; Sikora, W [Gornopromyshlennoe Obedinenie po Avtomatizatsii EMAG, Katowice (Poland)

1988-01-01

Discusses development of control equipment and control systems for machines and equipment used in underground black coal mining in Poland. The following types of control systems are comparatively evaluated: control systems for powered supports used at longwall faces (remote control, control of groups of powered support units, control of individual support units), control systems for shearer loaders (control of shearer loader position at a working face, control of motor loading, motor heating, pressure in hydraulic systems, control of roller bearings etc.), control systems for coal plows (remote start-up of a coal plow and auxiliary equipment, communications between coal miners at a working face, control of motor loading, control of cutting head position, water spraying, etc.), sensors used in control systems and control equipment. Development trends of control systems for equipment used at longwall faces are discussed.

Estudo do sistema radicular do arroz

Directory of Open Access Journals (Sweden)

Emílio B. Germek

1950-03-01

Full Text Available The development of the root system on five varieties of rice grown under upland conditions, has been studied. It has been found, with the rice varieties used and under the conditions tested, that 66 percent of the roots occured within 5 centimeters and 95 percent within 15 centimeters of the surface of the ground. A few roots were found to reach a depth of 1 meter, and occasionally to a depth of 1.35 meter. The Iguape-catete variety of rice showed a tendency to develop a somewhat deeper root system than the other varieties studied. Recognition of the fact that development of the roots of the rice plant is largely within the plowed layer of soil, suggests that deep plowing prior to planting with frequent and shallow cultivation following planting, to eliminate weed competition, would be desirable.

Determinants of breeding distributions of ducks

Science.gov (United States)

Johnson, D.H.; Grier, J.W.

1988-01-01

The settling of breeding habitat by migratory waterfowl is a topic of both theoretical and practical interest. We use the results of surveys conducted annually during 1955-81 in major breeding areas to examine the factors that affect the distributions of 10 common North American duck species. Three patterns of settling are described: homing, opportunistic, and flexible. Homing is generally more pronounced among species that use more stable (more predictable) wetlands, such as the redhead (Aythya americana), canvasback (A. valisineria), lesser scaup (A. affinis), mallard (Anas platyrhynchos), gadwall (Anas strepera), and northern shoveler (Anas clypeata). Opportunistic settling is more prevalent among species that use less stable (less predictable) wetlands, such as northern pintail (Anas acuta) and blue-winged teal (Anas discors). Flexible settling is exhibited to various degrees by most species.The 10 species are shown to fall along a natural ordination reflecting different life history characteristics. Average values of indices of r- and K-selection indicated that pintail, mallard, blue-winged teal, and shoveler have the most features associated with unstable or unpredictable environments. Gadwall, American wigeon (Anas americana), and green-winged teal (Anas crecca) were intermediate, and attributes of the diving ducks were associated with the use of stable or predictable environments.Some species--notably mallard, gadwall, blue-winged teal, redhead, and canvasback--tend to fill available breeding habitat first in the central portions of their range, and secondly in peripheral areas. Other species--American wigeon, green-winged teal, northern shoveler, northern pintail, and lesser scaup--fill their habitat in the order it is encountered during spring migration.Age and sex classes within species vary in their settling pattern. Some of this variation can be predicted from the mating systems of ducks in which breeding females, especially successful ones, have a

The changing face of oilsands mining : mobile crushing systems on the way

Energy Technology Data Exchange (ETDEWEB)

Cook, D.L.M.

2007-06-15

The mobile crushing system (MCS) is a new technology used in oil sand mining. With MCS, the crusher is moved right to the mine face where it is continuously loaded by shovel. The ore is then crushed on site and transported by a mobile conveyor for further processing. MMD Mineral Sizing (Canada) and Krupp Canada are the only 2 manufacturers that currently build MCS for the oilsands sector. Suncor, Albian Sands and Syncrude Canada are the 3 major oilsands operators currently using MCS. The benefits and challenges of MCS were presented. The use of large mobile surface mining equipment such as the MCS means that ground stability issues associated with large mobile truck and shovel mining operations will be reduced. In addition, given the current worker shortage in the mining industry, using single-stream mobile surface mining equipment means operators can reduce their labour force. However, some challenges remain. The sheer size and weight of the unit means it can deform the ground surface and sink under adverse conditions. Alternative tire and suspension concepts that may alleviate some of these stability issues are currently being researched. Other issues that may affect the performance of MCS include the oil sand density and viscosity around material flow. Syncrude Canada is considering the use of MCS technology to mitigate common oilsands-related environmental issues. It is also testing compact slurry preparation technology in which shovels will feed the oilsands directly into a MCS and then into the in-pit bitumen production system slurry equipment. The MCS unit at Suncor's mine cost $150 million. It has been running at 5,000 tonnes of ore per hour, equivalent to 15 loads of ore in the large trucks. Given the success of the unit, plans are in place for 5 more units to be in operation over the next 5 years. 4 figs.

Metallic particles into mechanical and hydraulic systems in agricultural and construction machines

Energy Technology Data Exchange (ETDEWEB)

Silva, Jair Rosas da; Silva, Deise Paula da [Instituto Agronomico de Campinas (IAC), Campinas, SP (Brazil). Centro de Engenharia Agricola; Bormio, Marcos Roberto [Universidade Estadual Paulista (UNESP), Bauru, SP (Brazil). Fac. de Engenharia

2008-07-01

The lubricant oil analysis are an indicator of the conditions how the lubricant is, may to allow the prevision of damages that occurred into machine due to the internal abrasion of hydraulic and mechanical components of the machines. The present study had the objective to determine the kind and quantity of the metallic particles that occurred into the lubricant oil of the mechanical and hydraulic compartments of the energy transmission systems of three kinds of machines: a tracked-tractor, a sugarcane harvester and a group of power-shovels. The metallic particles presents into these compartments were determined under laboratory tests and concerning to the following elements: iron, copper, chromium, lead, nickel, aluminum, silex, tin and molybdenum. About to the tracked-tractor, the metallic contaminators into to the oil charges surpasses the tolerate levels, considering the technical standards adopted in this evaluation. In the sugarcane harvester only a metallic element in excess was identified and, in a power-shovel group it was showed the need to correct air false entrances in the hydraulic or mechanical systems due the high presence of silex element. (author)

Gender and Farming in Ethiopia: an Exploration of Discourses and ...

African Journals Online (AJOL)

Asrat Gella

It is perhaps too early to say conclusively whether these events and the spotlight they have .... activities except a few which are seen as the exclusive domain of men. Plowing .... dependent on the power of the draught animal but with minimal.

Impacts of using salt and salt brine for roadway deicing.

Science.gov (United States)

2014-06-01

Idaho Transportation Department (ITD) uses a variety of methods to help ensure safe travel on the state highway system : following winter storm events. These methods include plowing, use of sand to improve traction, and use of salt and chemical : com...

Physiological analysis of methods to relieve dormancy of lettuce seeds

NARCIS (Netherlands)

Weges, R.

1987-01-01

<p>Low maximum temperature of germination restricts the cultivation of a number of lettuce cultivars to temperate conditions. Pretreatments have been studied that increase the maximum germination temperature, which is characterized by the temperature for 50% germination (T

Bad split during bilateral sagittal split osteotomy of the mandible with separators: a retrospective study of 427 patients.

Science.gov (United States)

Mensink, Gertjan; Verweij, Jop P; Frank, Michael D; Eelco Bergsma, J; Richard van Merkesteyn, J P

2013-09-01

An unfavourable fracture, known as a bad split, is a common operative complication in bilateral sagittal split osteotomy (BSSO). The reported incidence ranges from 0.5 to 5.5%/site. Since 1994 we have used sagittal splitters and separators instead of chisels for BSSO in our clinic in an attempt to prevent postoperative hypoaesthesia. Theoretically an increased percentage of bad splits could be expected with this technique. In this retrospective study we aimed to find out the incidence of bad splits associated with BSSO done with splitters and separators. We also assessed the risk factors for bad splits. The study group comprised 427 consecutive patients among whom the incidence of bad splits was 2.0%/site, which is well within the reported range. The only predictive factor for a bad split was the removal of third molars at the same time as BSSO. There was no significant association between bad splits and age, sex, class of occlusion, or the experience of the surgeon. We think that doing a BSSO with splitters and separators instead of chisels does not increase the risk of a bad split, and is therefore safe with predictable results. Copyright © 2012 The British Association of Oral and Maxillofacial Surgeons. Published by Elsevier Ltd. All rights reserved.

Correction of resistance to penetration by pedofunctions and a reference soil water content

Directory of Open Access Journals (Sweden)

Moacir Tuzzin de Moraes

2012-12-01

Full Text Available The soil penetration resistance is an important indicator of soil compaction and is strongly influenced by soil water content. The objective of this study was to develop mathematical models to normalize soil penetration resistance (SPR, using a reference value of gravimetric soil water content (U. For this purpose, SPR was determined with an impact penetrometer, in an experiment on a Dystroferric Red Latossol (Rhodic Eutrudox, at six levels of soil compaction, induced by mechanical chiseling and additional compaction by the traffic of a harvester (four, eight, 10, and 20 passes; in addition to a control treatment under no-tillage, without chiseling or additional compaction. To broaden the range of U values, SPR was evaluated in different periods. Undisturbed soil cores were sampled to quantify the soil bulk density (BD. Pedotransfer functions were generated correlating the values of U and BD to the SPR values. By these functions, the SPR was adequately corrected for all U and BD data ranges. The method requires only SPR and U as input variables in the models. However, different pedofunctions are needed according to the soil layer evaluated. After adjusting the pedotransfer functions, the differences in the soil compaction levels among the treatments, previously masked by variations of U, became detectable.

Mesolithic burial place in La Martina Cave (Dinant, Belgium)

International Nuclear Information System (INIS)

Dewez, M.; Gilot, E.; Groessens-Van-Dyck, M.C.; Cordy, J.M.

1995-01-01

The ''La Martina'' cave is located near Dinant (Belgium). Although the sediments had been shoveled out in the mid XIXth century, a calcic breccia has provided prehistoric bones. We can distinguish a Pleistocene fauna with cave bear, one Mesolithic burial place with two cromagnoid skeletons, from the 6th millennium BC, and some Holocene faunal remains. (authors). 7 refs

Goed resultaat met Aquanox tegen meeldauw en botrytis

NARCIS (Netherlands)

Sleegers, J.; Hofland-Zijlstra, J.D.

2011-01-01

De ontmanteling van de kas is in volle gang als we de foto maken. Een shovel rijdt voorbij als Ton en René Bekkers poseren. Zo'n 8,5 ha kas is sinds kort niet meer in gebruik. Toch verschijnt er een glimlach op de gezichten. "Een Bekkers lacht bijna altijd. Dat zit in onze genen." Beurtelings doen

PHANTOM: Practical Oblivious Computation in a Secure Processor

Science.gov (United States)

2014-05-16

competitive relationship between the cloud provider and the client. For example, Netflix is hosted on Amazon’s EC2 cloud infrastructure, while Amazon is a...unilever/ (visited on 03/21/2013). [7] Charles Babcock. Cloud Connect: Netflix Finds Home In Amazon EC2. Retrieved Sep 16, 2013. url: http...www.informationweek.com/cloud-computing/infrast ructure/cloud-connect- netflix -finds-home-in-amaz/229300547. [8] Jonathan Bachrach et al. “Chisel: Constructing

Endotoxins in surgical instruments of hip arthroplasty

OpenAIRE

Goveia, Vania Regina; Mendoza, Isabel Yovana Quispe; Guimarães, Gilberto Lima; Ercole, Flavia Falci; Couto, Bráulio Roberto Gonçalves Marinho; Leite, Edna Marilea Meireles; Stoianoff, Maria Aparecida Resende; Ferreira, José Antonio Guimarães

2016-01-01

Abstract OBJECTIVE To investigate endotoxins in sterilized surgical instruments used in hip arthroplasties. METHOD A descriptive exploratory study conducted in a public teaching hospital. Six types of surgical instruments were selected, namely: acetabulum rasp, femoral rasp, femoral head remover, chisel box, flexible bone reamer and femoral head test. The selection was based on the analysis of the difficulty in removing bone and blood residues during cleaning. The sample was made up of 60...

76 FR 77887 - Notice of Passenger Facility Charge (PFC) Approvals and Disapprovals

Science.gov (United States)

2011-12-14

... mounted snow plow blade Service road rehabilitation Acquire aircraft rescue and firefighting fire suits..., Anchorage, AK 11/04/11 22,000,000 21,043,173 01/01/06 01/01/06 06-17-C-01-ORD, Chicago, IL 11/08/11 73,198...

Arsenic Fate, Transport And Stability Study: Groundwater, Surface Water, Soil And Sediment Investigation At Fort Devens Superfund Site

Science.gov (United States)

A field investigation was conducted to examine the distribution of arsenic in groundwater, surface water, and sediments at the Fort Devens Superfund Site. The study area encompassed a portion of plow Shop Pond (Red Cove), which receives groundwater discharge from the aquifer und...

Telehealth Business: Boom Times, but Profits May Wait.

Science.gov (United States)

Calandra, Robert

2017-04-01

What we have here is irrational telehealth exuberance. Investors are plowing millions into startups. And even though millennials could be eager adopters, these are still early days for the industry. It may take years-and some regulatory changes-for profits to materialize.

Development and field evaluation of an intercropping machine for corn and bean

Directory of Open Access Journals (Sweden)

A Mondani

2016-09-01

Full Text Available Introduction Maximum efficiency of natural resources, reduced risk of production, improved fertility of soil, and increased production per area enjoyment have made intercropping a preferential practice compared with cropping. One of the fundamental problems in this kind of cropping is non-existence of suitable machines. In this research, a new intercropping machine has been designed and built for intercropping of corn and bean with precise ratios and different planting patterns. Materials and Methods The experiments were conducted at the Badjgah Research Station, Shiraz University, located in NW Shiraz, Iran. The soil texture was clay loam (16% sand, 48% silt, and 35% clay. The plot size was 9 m wide and 12 m long. The total number of the plots were 9. The basic components of intercropping machine were an adjustable frame to adjust row spacing for each unit planter about 550 mm horizontally independently (the row spacing between corn and bean planting lines was considered 375 mm, a hinged frame for adjustment of seeding depth and possible poor emergence of plants due to very deep or shallow planting, metering case frames for installing the vacuum metering disk units around which the seed drums have a row of 36 holes of 4.5 and 5.5 mm diameter for corn and bean, respectively, seed delivery tubes, a suction fan, shovel openers used for bedder planting for corn and lister planting for bean, a knife covering attachment, seed-firming wheels, interchangeable gears which are mechanical chain drives for 43 varying seeding rates driven by carrying wheel drives, two metal seed hoppers whose lower side walls’ slope can be adjust at a maximum level of 45 . A front wheel assist, Massey Ferguson tractor (MF-399 (ITM, Tabriz, Iran with a maximum engine power of 81 kW was used for field test of intercropping machine. Moldboard plow was used for primary tillage and the depth of plowing was 25 cm. Next, by an offset disk harrow, the field was disked twice for

Hand-Arm vibration assessment among tiller operator

Directory of Open Access Journals (Sweden)

P. Nassiri

2013-08-01

Result: Results of the present study indicated that in all measured situations, exposure to hand arm vibration was higher than the standard limit suggested by Iranian occupational health committee and there was risk of vibration-induced disorders. The maximum exposure to vibration is in plowing ground. Exposure to hand arm vibration in three modes of plowing, transmission and natural, were respectively 16.95, 14.16 and 8.65 meters per second squared. Additionally, in all situations, vibration exposure was highest in the X-axis in comparison with Z- and Y-axes. .Conclusion: This study emphasizes on the need to provide intervention and controlling and managing strategies in order to eliminate or reduce vibration transmitted from tiller to operators hand and arm and also prevent to serious problems including neurovascular disorders, discomfort and white finger syndrome. Meanwhile, more studies are necessary to identify the sources of vibration on different models of tiller.

Fatty acid composition of adipose tissue triglycerides after weight loss and weight maintenance

DEFF Research Database (Denmark)

Kunešová, M; Hlavatý, P; Tvrzická, E

2012-01-01

Fatty acid composition of adipose tissue changes with weight loss. Palmitoleic acid as a possible marker of endogenous lipogenesis or its functions as a lipokine are under debate. Objective was to assess the predictive role of adipose triglycerides fatty acids in weight maintenance in participants...... of the DIOGENES dietary intervention study. After an 8-week low calorie diet (LCD) subjects with > 8 % weight loss were randomized to 5 ad libitum weight maintenance diets for 6 months: low protein (P)/low glycemic index (GI) (LP/LGI), low P/high GI (LP/HGI), high P/low GI (HP/LGI), high P/high GI (HP....../HGI), and a control diet. Fatty acid composition in adipose tissue triglycerides was determined by gas chromatography in 195 subjects before the LCD (baseline), after LCD and weight maintenance. Weight change after the maintenance phase was positively correlated with baseline adipose palmitoleic (16:1n-7...

Use of Technologies and Social Nets in the Formative Process of Superior Education

Directory of Open Access Journals (Sweden)

Karina Virginia Mero Suárez

2018-02-01

Full Text Available Social networks and the uses of technologies for the training process have become indispensable tools in each of the educational scenarios of Higher Education. These resources together with what the web provides become new way of teaching and learning, in which learners become the protagonists of the teaching processes. The present work aimed to analyze the relevance of social networks and the uses of technologies in the educational function in each of the training scenarios in higher education. The importance of social networks was described, as well as the uses of new technologies, highlighting what is related to the strengthening of the new lists of the teacher and student, the interaction of students through each of the resources provided by the Web, and collaborative work, which has substantially favored learning. It was concluded that social networks plow tools that together with the new technologies plows welcomed by the students, constitute to support for the formation process, strengthening autonomy, cooperative work and knowledge management, converting new innovative spaces for new forms of teaching and learning. In addition to the great impact that the internet have and will in the development of new social networks in different contexts; and therefore, teachers cannot ignore them. In this sense, it should also be considered that teachers plow responsible for this change of attitude with respect to the new educational models where it there is the mission to it produces changes in the communicative environment before social uses of the network.

The importance of local factors and management in determining wheat yield variability in on-farm experimentation in Tigray, northern Ethiopia

NARCIS (Netherlands)

Kraaijvanger, R.; Veldkamp, A.

2015-01-01

<p>Low crop yield in Tigray is one of the causes of food insecurity. Intervention work to increase yields, however, had only limited success and farmers often hesitated to adopt recommended practices. Considering this, we used participatory on-farm experimentation to arrive at best practices

Resurrection of glyphosate resistant palmer amaranth control in conservation tillage dicamba tolerant cotton; soil health salvation using herbicide technology

Science.gov (United States)

Conservation agriculture hecterage in the mid-south and southeastern US has decreased because of herbicide resistant and other hard to control weeds. Producers have increasingly utilized tillage, the majority either using a moldboard plow to deeply bury weed seed and decrease emergence, or ‘vertica...

Microbial N Transformations and N2O Emission after Simulated Grassland Cultivation: Effects of the Nitrification Inhibitor 3,4-Dimethylpyrazole Phosphate (DMPP)

DEFF Research Database (Denmark)

Duan, Yun-Feng (Kevin); Kong, Xianwang; Schramm, Andreas

2017-01-01

corresponded to plowing or rotovation to study the effects of soil-residue contact on N transformations. DMPP was sprayed on aboveground parts of ryegrass and white clover plants before incorporation. During a 42-day incubation, soil mineral N dynamics, potential ammonia oxidation (PAO), denitrifying enzyme...

Testing post-weaning food motivation in low and normal birth weight pigs in a runway and operant conditioning task

NARCIS (Netherlands)

Eck, van L.M.; Antonides, A.; Nordquist, R.E.; Staay, van der F.J.

2016-01-01

<p>Low birth weight (LBW) pigs face more welfare challenges than their normal birth weight (NBW) siblings. Understanding the underlying mechanisms of cognitive and learning abilities in these pigs may help to improve their welfare. Early competition in life over resources, combined with the higher

Root Parameters Show How Management Alters Resource Distribution and Soil Quality in Conventional and Low-Input Cropping Systems in Central Iowa.

Directory of Open Access Journals (Sweden)

Patricia A Lazicki

Full Text Available Plant-soil relations may explain why low-external input (LEI diversified cropping systems are more efficient than their conventional counterparts. This work sought to identify links between management practices, soil quality changes, and root responses in a long-term cropping systems experiment in Iowa where grain yields of 3-year and 4-year LEI rotations have matched or exceeded yield achieved by a 2-year maize (Zea mays L. and soybean (Glycine max L. rotation. The 2-year system was conventionally managed and chisel-ploughed, whereas the 3-year and 4-year systems received plant residues and animal manures and were periodically moldboard ploughed. We expected changes in soil quality to be driven by organic matter inputs, and root growth to reflect spatial and temporal fluctuations in soil quality resulting from those additions. We constructed a carbon budget and measured soil quality indicators (SQIs and rooting characteristics using samples taken from two depths of all crop-phases of each rotation system on multiple dates. Stocks of particulate organic matter carbon (POM-C and potentially mineralizable nitrogen (PMN were greater and more evenly distributed in the LEI than conventional systems. Organic C inputs, which were 58% and 36% greater in the 3-year rotation than in the 4-year and 2-year rotations, respectively, did not account for differences in SQI abundance or distribution. Surprisingly, SQIs did not vary with crop-phase or date. All biochemical SQIs were more stratified (p<0.001 in the conventionally-managed soils. While POM-C and PMN in the top 10 cm were similar in all three systems, stocks in the 10-20 cm depth of the conventional system were less than half the size of those found in the LEI systems. This distribution was mirrored by maize root length density, which was also concentrated in the top 10 cm of the conventionally managed plots and evenly distributed between depths in the LEI systems. The plow-down of organic amendments

Root-Knot Nematode Management in Double-Cropped Plasticulture Vegetables

OpenAIRE

Desaeger, J. A.; Csinos, A. S.

2006-01-01

Combination treatments of chisel-injected fumigants (methyl bromide, 1,3-D, metam sodium, and chloropicrin) on a first crop, followed by drip-applied fumigants (metam sodium and 1,3-D ± chloropicrin) on a second crop, with and without oxamyl drip applications were evaluated for control of Meloidogyne incognita in three different tests (2002 to 2004) in Tifton, GA. First crops were eggplant or tomato, and second crops were cantaloupe, squash, or jalapeno pepper. Double-cropped vegetables suffe...

Large-sample neutron activation analysis in mass balance and nutritional studies

NARCIS (Netherlands)

van de Wiel, A.; Blaauw, Menno

2018-01-01

<p>Low concentrations of elements in food can be measured with various techniques, mostly in small samples (mg). These techniques provide only reliable data when the element is distributed homogeneously in the material to be analysed either naturally or after a homogenisation procedure. When this is

Microstructure and stability of two sandy loam soils with different soil management

NARCIS (Netherlands)

Bouma, J.

1969-01-01

A practical problem initiated this study. In the Haarlemmermeer, a former lake reclaimed about 1850, several farmers had difficulties with soil structure. Land, plowed in autumn, was very wet in spring. Free water was sometimes present on the soil surface. Planting and seeding were long delayed in

ARSENIC TRANSPORT ACROSS THE GROUNDWATER – SURFACE WATER INTERFACE AT A SITE IN CENTRAL MASSACHUSETTS

Science.gov (United States)

Plow Shop Pond, located in central Massachusetts within the New England ‘arsenic belt,’ receives water from a series of interconnected upstream ponds as well as from upward-discharging groundwater. A small, shallow embayment on the southwest side of the pond is known as Red Cove...

26 CFR 48.6420-6 - Records to be kept in substantiation of credits or payments.

Science.gov (United States)

2010-04-01

... TREASURY (CONTINUED) MISCELLANEOUS EXCISE TAXES MANUFACTURERS AND RETAILERS EXCISE TAXES Refunds and Other Administrative Provisions of Special Application to Retailers and Manufacturers Taxes § 48.6420-6 Records to be... performed the farming operation, (ii) a description of the type of work (such as plowing, threshing...

Asie du sud | Page 97 | CRDI - Centre de recherches pour le ...

International Development Research Centre (IDRC) Digital Library (Canada)

The introduction and testing of small farm machineries such as iron plows, threshers, and dehullers (which remove the husk from the millet seed) have significantly ... Since 1998, Helen Keller International (HKI) has supported women in homestead-level production of nutrient-rich fruits, vegetables, and animal source foods.

No evidence that migratory geese disperse avian influenza viruses from breeding to wintering ground

NARCIS (Netherlands)

Yin, Shenglai; Kleijn, David; Müskens, Gerard J.D.M.; Fouchier, Ron A.M.; Verhagen, Josanne H.; Glazov, Petr M.; Si, Yali; Prins, Herbert H.T.; Boer, de Fred

2017-01-01

<p>Low pathogenic avian influenza virus can mutate to a highly pathogenic strain that causes severe clinical signs in birds and humans. Migratory waterfowl, especially ducks, are considered the main hosts of low pathogenic avian influenza virus, but the role of geese in dispersing the virus over

Extrême-Orient | Page 92 | CRDI - Centre de recherches pour le ...

International Development Research Centre (IDRC) Digital Library (Canada)

The introduction and testing of small farm machineries such as iron plows, threshers, and dehullers (which remove the husk from the millet seed) have significantly ... Since 1998, Helen Keller International (HKI) has supported women in homestead-level production of nutrient-rich fruits, vegetables, and animal source foods.

South Asia | Page 97 | IDRC - International Development Research ...

International Development Research Centre (IDRC) Digital Library (Canada)

The introduction and testing of small farm machineries such as iron plows, threshers, and dehullers (which remove the husk from the millet seed) have significantly ... Since 1998, Helen Keller International (HKI) has supported women in homestead-level production of nutrient-rich fruits, vegetables, and animal source foods.

Exploring nutrient management options to increase nitrogen and phosphorus use efficiencies in food production of China

NARCIS (Netherlands)

Wang, Mengru; Ma, Lin; Strokal, Maryna; Chu, Yanan; Kroeze, Carolien

2018-01-01

<p>Low nitrogen (NUE) and phosphorus (PUE) use efficiencies in food production in China result in large losses of nitrogen (N) and phosphorus (P) to the environment. The Chinese government formulated policies to increase the NUEs and PUEs. Recent policies aim for zero growth in synthetic fertilizer

Weight loss maintenance in overweight subjects on ad libitum diets with high or low protein content and glycemic index

DEFF Research Database (Denmark)

Aller, E E J G; Larsen, Thomas Meinert; Holst, Claus

2014-01-01

Background:A high dietary protein (P) content and low glycemic index (GI) have been suggested to be beneficial for weight management, but long-term studies are scarce.Objective:The DIOGENES randomized clinical trial investigated the effect of P and GI on weight loss maintenance in overweight...... or obese adults in 8 centers across Europe. This study reports the 1-year results in 2 of the centers that extended the intervention to 1 year.Method:After an 8-week low calorie diet (LCD), 256 adults (BMI>27 kg/m(2)) were randomized to 5 ad libitum diets for 12 months: high P/low GI (HP/LGI), high P/high...... GI (HP/HGI), low P/low GI (LP/LGI), low P/high GI (LP/HGI) and a control diet. During the first 6 months foods were provided for free through a shop system, during the whole 12-month period subjects received guidance by a dietician. Primary outcome variable was the change in body weight over the 12...

Improving electrical equipment and control systems for shield integrated mining systems

Energy Technology Data Exchange (ETDEWEB)

Rabinovich, Z.M.; Starikov, B.Ya.; Kibrik, I.S.

1984-06-01

The design and operation are discussed for electrical equipment and control systems for the 1AShchM, the ANShch and the 2ANShch shield integrated face systems consisting of shield supports, coal plow and chain conveyor. The shield system is used for mining inclined and steep coal seams endangered by coal dust explosions, methane or rock bursts. Control and electrical system for 3 types of shield face mining systems is similar. It cuts energy supply when methane content at working faces exceeds the maximum permissible level, controls haulage rate and cutting rate of a coal plow, controls operation of shield supports (using the Sirena system), controls dust suppression system and its water consumption. The system is also equipped with communications equipment. Tests of the control and electrical system for the integrated shield system carried out in the im. Gagarin mine in the Ukraine are described. The VAUS III control system developed by Dongiprouglemash was tested.

Effects of different soil preparation techniques on the Anatolian Black Pine (Pinus nigra Arnold subsp. pallasiana (Lamb. Holmboe regeneration

Directory of Open Access Journals (Sweden)

Adil Çalışkan

2014-07-01

Full Text Available In this study, the effects of different soil preparation treatments on regeneration of black pine success were examined and some suggestions were given according to the results. Twelve sample plots were randomly set in the research area. The size of each sample plot was 4 m². Sample plots were seeded equally with a total number of 2304 (48 seeds per m2 seeds in April 2012. The number of surviving seedlings was recorded every month from May to November in 2012. Surviving seedlings were recorded again in November 2013 and growths of thirty seedlings which are selected randomly from the all sample plots were examined. It was found that soil treatment with machine was more successful in regeneration at semi-arid regions like Cerkes-Turkey. Plowing equipment as mechanical soil cultivation has more economically advantageous in first years. However, the success and quality of seedlings were better in soil preparation with ripper equipment compared to plowing.

A New Model of Teaching Pedagogy in CHISEL for the 21th Century.

Science.gov (United States)

Huang, Li-yi

This paper describes and compares six models for teaching second languages developed and adopted since 1840 (grammar-translation, direct, structural, situational, audiolingual, and communicative methods), and proposes a seventh, the cognitive-linguistic method, incorporating Noam Chomsky's theory of learning. The model takes both extralinguistic…

Removal of garlic-like off-odours from crustacea by gamma irradiation

International Nuclear Information System (INIS)

Freeman, D.J.; Izzard, M.E.; Whitfield, F.B.

1985-01-01

The strong garlic-like off-odours associated with the male shovel-nosed lobster (Ibacus peronii) and the royal red prawn (Hymenopenaeus sibogae) have been attributed principally to the presence of the sulphur-containing compound bis-(methylthio)-methane. In the male shovel-nosed lobster the concentration of this compound increases very rapidly following death, and a small number of contaminated crustacea may cause an entire consignment to be condemned. A method for removing this noxious odour was developed which involved gamma-irradiation of the affected crustacea using a cobalt-60 source. Eight lobsters were subjected to gamma-irradiation at a dose rate of 10 kGy an hour; one half of each was given a dose of 25 kGy and the other half a dose of 5 kGy. Results showed that a high dose completely removes the existing off-odour, and also prevents its further formation. With the lower dose the off-odour is not completely removed. A trial using fresh royal red prawns at doses of 0.5 and 1.0 kGy showed irradiation removed all traces of the off-odour, but in those irradiated at the higher dose a slight burnt flavour was noticeable

Removal of garlic-like off-odours from crustacea by gamma irradiation

Energy Technology Data Exchange (ETDEWEB)

Freeman, D J; Izzard, M E [Australian Atomic Energy Commission Research Establishment, Lucas Heights; Whitfield, F B [Commonwealth Scientific and Industrial Research Organization, North Ryde (Australia). Div. of Food Research

1985-04-01

The strong garlic-like off-odours associated with the male shovel-nosed lobster (Ibacus peronii) and the royal red prawn (Hymenopenaeus sibogae) have been attributed principally to the presence of the sulphur-containing compound bis-(methylthio)-methane. In the male shovel-nosed lobster the concentration of this compound increases very rapidly following death, and a small number of contaminated crustacea may cause an entire consignment to be condemned. A method for removing this noxious odour was developed which involved gamma-irradiation of the affected crustacea using a cobalt-60 source. Eight lobsters were subjected to gamma-irradiation at a dose rate of 10 kGy an hour; one half of each was given a dose of 25 kGy and the other half a dose of 5 kGy. Results showed that a high dose completely removes the existing off-odour, and also prevents its further formation. With the lower dose the off-odour is not completely removed. A trial using fresh royal red prawns at doses of 0.5 and 1.0 kGy showed irradiation removed all traces of the off-odour, but in those irradiated at the higher dose a slight burnt flavour was noticeable.

Modeling the effect of soil structure on water flow and isoproturon dynamics in an agricultural field receiving repeated urban waste compost application.

Science.gov (United States)

Filipović, Vilim; Coquet, Yves; Pot, Valérie; Houot, Sabine; Benoit, Pierre

2014-11-15

Transport processes in soils are strongly affected by heterogeneity of soil hydraulic properties. Tillage practices and compost amendments can modify soil structure and create heterogeneity at the local scale within agricultural fields. The long-term field experiment QualiAgro (INRA-Veolia partnership 1998-2013) explores the impact of heterogeneity in soil structure created by tillage practices and compost application on transport processes. A modeling study was performed to evaluate how the presence of heterogeneity due to soil tillage and compost application affects water flow and pesticide dynamics in soil during a long-term period. The study was done on a plot receiving a co-compost of green wastes and sewage sludge (SGW) applied once every 2 years since 1998. The plot was cultivated with a biannual rotation of winter wheat-maize (except 1 year of barley) and a four-furrow moldboard plow was used for tillage. In each plot, wick lysimeter outflow and TDR probe data were collected at different depths from 2004, while tensiometer measurements were also conducted during 2007/2008. Isoproturon concentration was measured in lysimeter outflow since 2004. Detailed profile description was used to locate different soil structures in the profile, which was then implemented in the HYDRUS-2D model. Four zones were identified in the plowed layer: compacted clods with no visible macropores (Δ), non-compacted soil with visible macroporosity (Γ), interfurrows created by moldboard plowing containing crop residues and applied compost (IF), and the plow pan (PP) created by plowing repeatedly to the same depth. Isoproturon retention and degradation parameters were estimated from laboratory batch sorption and incubation experiments, respectively, for each structure independently. Water retention parameters were estimated from pressure plate laboratory measurements and hydraulic conductivity parameters were obtained from field tension infiltrometer experiments. Soil hydraulic

Effect of application timing and method on efficacy and phytotoxicity of 1,3-D, chloropicrin and metam-sodium combinations in squash plasticulture.

Science.gov (United States)

Desaeger, Johan A; Seebold, Kenneth W; Csinos, Alex S

2008-03-01

Metam-sodium, 1,3-dichloropropene (1,3-D) and chloropicrin are widely used soil fumigants. Combined application of metam-sodium and 1,3-D + chloropicrin is intended to improve efficacy and broaden spectrum of control, but little is known about the effect on crop safety. This study aimed to evaluate the effects of application timing of fumigant combinations on soilborne pest and disease control (nematodes, soil fungi and weeds) and growth of squash. Two separate tests with chisel-injected and drip-applied fumigant combinations and plant-back times ranging from 1 to 4 weeks were conducted in Tifton, GA, USA, in spring and fall 2002. Fumigant combinations using 1,3-D, chloropicrin and metam-sodium were as effective as methyl bromide in controlling Meloidogyne incognita (Kofoid & White) Chitwood, Pythium irregulare Buis., Rhizoctonia solani Kühn and Cyperus esculentus L. Chisel-applied combinations were more effective in terms of root-knot nematode control than drip-applied combinations. Root-knot nematode reduced squash yields by up to 60%. Phytotoxicity problems and lower yields were observed during spring, especially following 1,3-D + chloropicrin and when plant-back periods were shorter. The main problem with fumigant alternatives to methyl bromide may not be reduced efficacy but, in particular for 1,3-D products, loss of flexibility in terms of longer plant-back periods. (c) 2008 Society of Chemical Industry.

YIELD OF MAIZE (ZEA MAYS L. ON DIFFERENT SOIL TILLAGE VARIANTS

Directory of Open Access Journals (Sweden)

Danijel Jug

2006-12-01

Full Text Available Reduced tillage, as well as the most reduced tillage – No-till – every year are becoming more important in our region. Unfortunately, the areas under reduced tillage are still very small. In order to establish optimal system of reduced soil tillage, the experimental trials were set on Chernozem soil type in northern Baranja during three vege¬tation seasons (1998/1999-2000/2001 and five soil tillage systems: CT Conventional Tillage (primary soil tillage by moldboard ploughing at 30-35 cm depth, DH Multiple Diskharrowing at 10-15 cm as primary tillage, CH Chiseling and diskharrowing (chiseling at 30-35 cm and diskharrowing at 10-15 cm as primary tillage, PD One diskharro-wing pass (diskharrowing at 10-15 cm as primary tillage, and NT No-tillage system. The highest yields were recor¬ded at CT with three-year average of 9.29 t/ha, followed by CH with 8.37 t/ha, DH with 8.07 t/ha, PD with 6.99 t/ha, whereas the lowest yields were recorded at NT treatment, with three-year average of 5.94 t/ha. The highest profit was achieved at CT treatment (665,34 HRK/ha, followed by CH (189,24 HRK/ha, DH (77,20 HRK/ha, PD (-334,95 HRK/ha and NT (-459,81 HRK/ha.

77 FR 14584 - Notice of Passenger Facility Charge (PFC) Approvals and Disapprovals

Science.gov (United States)

2012-03-12

.... Insulation of hangars 661, 662, 663, 665, and 666. Hangar tail dock; 665 electrical/insulation; water study. Electrical/insulation of hangars 661, 663, 664, 666, and 667. Hangar improvements: hangars 664, 665, 667, and... vehicle. Plow truck with broom and deicing equipment. Sand truck replacement. Airfield loader. Fire truck...

Trends and patterns of anthropogenic evolution of chernozems in lands of agricultural afforestation within the territory of forest-steppe in the center of eastern Europe

Science.gov (United States)

The anthropogenic evolution of chernozems as a result of plowing and the creation of forest shelterbelts on three meadow-steppe areas of forest-steppe were studied. It was established, that in all areas there are similar patterns, caused by the transformation of virgin soils into arable soils and vi...

Mechanical soil disturbance as a determinant of arbuscular mycorrhizal fungal communities in semi-natural grassland

DEFF Research Database (Denmark)

Schnoor, Tim Krone; Lekberg, Ylva; Rosendahl, Søren

2011-01-01

an ongoing grassland restoration experiment that contained replicated plowed and control plots. The AM fungal community in roots was determined using nested PCR and LSU rDNA primers. We identified 38 phylotypes within the Glomeromycota, of which 29 belonged to Glomus A, six to Glomus B, and three...

Removal of off-flavours in some Australian crustacea by ionising radiation

International Nuclear Information System (INIS)

Freeman, D.J.

1985-01-01

Development of an export industry based on the deep sea royal red prawn, haliporoides sibogae and the shallow water shovel nosed lobster or balmain bug, lbacus peronii has been hampered by the sweet garlic off-flavour often encountered in both these species. A method for removing this noxious odour was developed which involved gamma irradiation of the affected crustacea using a cobalt-60 source

Golden Jubilee photos: Digging for CERN

CERN Multimedia

2004-01-01

Geneva was selected as the site for the CERN Laboratory at the third session of the provisional Council in 1952. This selection successfully passed a referendum in the canton of Geneva in June 1953 by 16539 votes to 7332. On 17 May 1954, the first shovel of earth was dug on the Meyrin site under the eyes of Geneva officials and members of CERN staff (below).

Making ropes work

Energy Technology Data Exchange (ETDEWEB)

Gower, E. [WRCA (United States)

2006-11-15

The article looks at types of rope for different applications of surface mining ropes. The Wire Rope Corp. of America (WRCA), a leading producer, has over the last three years introduced shovel hoist rope, a new line of dragline ropes and a new drag rope designed for reverse bend fairlead systems. Each of these is discussed in the short article, with results from actual field use.

First excavation work on Meyrin site

CERN Document Server

1954-01-01

Geneva was selected as the site for the CERN Laboratory at the third session of the provisional Council in 1952. This selection successfully passed a referendum in the canton of Geneva in June 1953 by 16539 votes to 7332. On 17 May 1954, the first shovel of earth was dug on the Meyrin site under the eyes of Geneva officials and members of CERN staff

Evaluation of methods to sample fecal indicator bacteria in foreshore sand and pore water at freshwater beaches.

Science.gov (United States)

Vogel, Laura J; Edge, Thomas A; O'Carroll, Denis M; Solo-Gabriele, Helena M; Kushnir, Caitlin S E; Robinson, Clare E

2017-09-15

Fecal indicator bacteria (FIB) are known to accumulate in foreshore beach sand and pore water (referred to as foreshore reservoir) where they act as a non-point source for contaminating adjacent surface waters. While guidelines exist for sampling surface waters at recreational beaches, there is no widely-accepted method to collect sand/sediment or pore water samples for FIB enumeration. The effect of different sampling strategies in quantifying the abundance of FIB in the foreshore reservoir is unclear. Sampling was conducted at six freshwater beaches with different sand types to evaluate sampling methods for characterizing the abundance of E. coli in the foreshore reservoir as well as the partitioning of E. coli between different components in the foreshore reservoir (pore water, saturated sand, unsaturated sand). Methods were evaluated for collection of pore water (drive point, shovel, and careful excavation), unsaturated sand (top 1 cm, top 5 cm), and saturated sand (sediment core, shovel, and careful excavation). Ankle-depth surface water samples were also collected for comparison. Pore water sampled with a shovel resulted in the highest observed E. coli concentrations (only statistically significant at fine sand beaches) and lowest variability compared to other sampling methods. Collection of the top 1 cm of unsaturated sand resulted in higher and more variable concentrations than the top 5 cm of sand. There were no statistical differences in E. coli concentrations when using different methods to sample the saturated sand. Overall, the unsaturated sand had the highest amount of E. coli when compared to saturated sand and pore water (considered on a bulk volumetric basis). The findings presented will help determine the appropriate sampling strategy for characterizing FIB abundance in the foreshore reservoir as a means of predicting its potential impact on nearshore surface water quality and public health risk. Copyright © 2017 Elsevier Ltd. All rights

CAD-based strength analysis of EK-18 excavator bucket construction for mounting of anti-adhesive devices

Science.gov (United States)

Zenkov, S. A.; Lobanov, D. V.

2018-03-01

3D rigid-body model of a bucket of power shovel EK-18 was built using modern CAD-software. Tetrahedral grid with 10-node second-order elements was chosen, and the given model was imported to APM WinMachine - model preparation preprocessor for finite element analysis. The finite element model was based on the geometrical model, imported from KOMPAS-3D to APM Studio. Calculation of stressed-strained state of the bucket was carried out under the forces emerging while digging with “back hoe” equipment. Shift, deformation and tension charts were planned and the most and the least strained areas were pointed out. Wet coherent soil excavation deals with soil adhesion to working bodies of power shovels and leads to reduced performance. The performance decrease is caused by a reduction of useful bucket capacity and partial unloading, increased front resistance to cutting (digging) caused by wet soil adhesion to a working body, increased bucket entry resistance, increased idle time caused by necessity to clean working bodies. Also energy losses increase and quality of work drops because friction forces go up. Friction force occurs while digging and levelling account for 30…70 percent of total digging resistance while performance decreases 1.2…2 times and more. Vibrothermal exposure creates new technological effect which involves a wider humidity range of efficient application and a reduction of friction forces. Disintegrating adhesion bonds with heating requires less driving force from the vibrator. Vibration boosts up heating of the contact layer, which reduces thermal energy losses. However, the question of piezoelectric ceramic actuators location on the excavator bucket needs to be dealt with. The most suitable spots for mounting piezoelectric ceramic devices for reducing soil adhesion to the excavator bucket were defined. Their efficiency is derived from combined (vibrothermal) methods of exposure. Such devices eliminates soil adhesion to the bucket and increases

New free-release and sorting monitors developed for NPP A-1 decommissioning, Slovakia - 59071

International Nuclear Information System (INIS)

Slavik, Ondrej; Listjak, Martin; Kravar, Kamil; Slaninka, Alojz; Pely, Igor

2012-01-01

A pilot free-release monitoring post with a 600 L container monitor was developed and metrological tested within the 2. stage of NPP A1 decommissioning project. In order to reduce the volume of contaminated soil monitoring a conceptual design of fast sorting loader shovel monitor (loader's spoon) was proposed and tested within the project as well. The free-release monitoring post makes use of a pair of electrically cooled lead shielded semiconductor detectors placed into a mounting rack ensuring measurements in either horizontal (container monitoring) or vertical (drum monitoring) counting geometry. For evaluation of measured HPGe spectra the Canberra -Packard ISOCS detection efficiency calculation code was used. A loader is used to change the measured side of the 600 L container. For metrological certification of this monitor a special prototype test container with 24 rod sources inside a regular grid was necessary to design and to use. The mentioned above vertical counting geometry together with an additional drum rotator ensures standard free release monitoring of materials in 200 l rotating drums. Successful metrological qualification of the both counting geometries at SMU Bratislava showed 20 % accuracy class. A pair of NaI(Tl) detectors and a measurement and navigation frame ensuring loader shovel fixation in counting position are used for the fast sorting monitoring. The navigation of loader and its shovel to the counting geometry should be as fast as possible. The monitored results shall be indicated by a prompt light indication system (apart from storing on HDD). MCNP 5 calculation code was used for assessment of gross gamma 137 Cs detection efficiency. The estimated MDA for a pair of 2'' x 2'' Na(Tl) detectors and 30 s acquisition time is about 90 Bq/kg. However, due to the counting geometry deviations from calculated values the uncertainty of measurements can be relatively high. Hence, the system is applicable for sorting monitoring only. (authors)

Paint Scaler. Innovative Technology Summary Report

International Nuclear Information System (INIS)

None

2000-01-01

The Paint Scaler can collect paint samples quickly and efficiently for lab analysis. The Rotary Hammer Drill is a 24-V battery operated, 3/4-in. rotary hammer drill. When used with an optional chipping adapter, the Bosch Rotary Hammer Drill can be used to perform chipping and chiseling tasks such as paint removal from either concrete or metal surfaces. It is ultra-compact, lightweight with an ergonomic balanced grip. The battery operation gives the operator more flexibility during sampling activities

DESIGNING OF DEVELOPED SURFACES OF COMPLEX PARTS

Directory of Open Access Journals (Sweden)

S. S. Tyshchenko

2017-04-01

Full Text Available Purpose. The paper focuses on ensuring the rational choice of parameters of the mating surfaces of parts when designing process equipment based on the methods of artificial intelligence. Methodology. The paper considers the geometric model of a ruled developed surface, the conditions of existence of such a surface and provides a generalized algorithm for surface plotting regardless of the type of the working element or the machine-building product. One of the most common technical surfaces are the ruled ones, among which a special position is occupied by developed surfaces (thanks to their differential-parametric properties: surface tangent plane is n contact along the rectilinear generator and does not change its position in space when changing the point of contact; surfaces can be produced by bending sheet metal. These provisions enable a product manufacturer to save significant material and energy means, therefore, the development of geometric models of such surfaces is an important task. Findings. We analyzed the geometrical model of the developed surface which is incident to two guides. Experimental studies have shown the applicationprospectivity of semi-digger moldboards on moldboard plows, particularly on the double-deck ones. Taking into account the operating speed of the plow 2.8 m/s, the plant residues plowing percentage for plow with semi-digger moldboards is 98.9%, and with the digger ones – 96.1%. Originality. According to results: 1 the approaches to solving the problem of recognition of wear conditions of the tested interface, depicted by its conceptual model, were elaborated; 2 the corresponding algorithms of the computational procedures were built; 3 the mathematical model that determines the effect of the parameters of the contacting surfaces on their performance properties – linear wear rate during the normal wear and tear was developed; 4 for this model the theoretical prerequisite of use for the random mating study were

Nudging toward Inquiry: Awakening and Building upon Prior Knowledge

Science.gov (United States)

Fontichiaro, Kristin, Comp.

2010-01-01

"Prior knowledge" (sometimes called schema or background knowledge) is information one already knows that helps him/her make sense of new information. New learning builds on existing prior knowledge. In traditional reporting-style research projects, students bypass this crucial step and plow right into answer-finding. It's no wonder that many…

23 CFR 658.5 - Definitions.

Science.gov (United States)

2010-04-01

... of rural arterials and their extensions into or through urban areas in existence on June 1, 1991, as..., with or without a plow or blade attached in front, and being used for the purpose of spreading the... or maintenance machinery, and emergency apparatus which includes fire and police emergency equipment...

Produtividade de soja e milho após coberturas de inverno e descompactação mecânica do solo Soybean and corn yield after soil winter covers and soil mechanical loosening

Directory of Open Access Journals (Sweden)

Henrique Debiasi

2010-06-01

Full Text Available O objetivo deste trabalho foi avaliar o efeito de coberturas de inverno e da descompactação mecânica do solo sobre o desempenho de soja e milho, em sistema de plantio direto. Foram conduzidos dois experimentos em Eldorado do Sul, RS, sobre Argissolo Vermelho compactado, nas safras 2005/2006 e 2006/2007. No primeiro, o delineamento experimental foi em blocos ao acaso, com parcelas subdivididas. Os tratamentos consistiram de duas profundidades teóricas de atuação da haste sulcadora da semeadora (0,06 e 0,12 m, subparcela e de três tipos de coberturas do solo no inverno (parcela: pousio, aveia-preta (Avena strigosa e aveia-preta+ervilhaca (Vicia Sativa. Em 2006, a cobertura aveia-preta+ervilhaca foi substituída por nabo-forrageiro (Raphanus sativus. No segundo experimento, realizado em blocos ao acaso, o solo foi escarificado e os tratamentos consistiram do uso de aveia-preta ou nabo-forrageiro como cobertura de inverno. Os cultivos de cobertura reduziram a compactação superficial do solo (0-0,06 m em comparação ao pousio e, na safra 2006/2007, sob condições de baixa disponibilidade hídrica, proporcionaram maior produtividade de milho e soja. Isso não se repetiu em 2006/2007, quando a disponibilidade hídrica foi adequada. O aumento da profundidade de atuação das hastes sulcadoras não influenciou a produtividade da soja e do milho. A escarificação reduziu a produtividade da soja e do milho em relação ao SPD contínuo.The objective of this work was to evaluate the effect of soil winter covers and soil mechanical loosening on soybean and corn yield, in no-tillage system. Two experiments were carried oud in Rio Grande do Sul state, Brazil, in a compacted Argissolo Vermelho (Haplic Acrisol, in the 2005/2006 and 2006/2007 crop seasons. The first experiment was carried out in a complete block design, with a split plot arrangement. The treatments were two theoretical working depths of a driller chisel-type furrow opener (0.06 and 0

Processes and Causes of Accelerated Soil Erosion on Cultivated ...

African Journals Online (AJOL)

Processes and Causes of Accelerated Soil Erosion on Cultivated Fields of South Welo, Ethiopia. ... In most of the highlands, crop cultivation is carried out without any type of terracing, while about 74 per cent of this land requires application of contour plowing, broad-based terracing, or bench terracing. The third group of ...

The Navajo Agricultural Projects Industry: Subsistence Farming to Corporate Agribusiness.

Science.gov (United States)

Barry, Tom

1979-01-01

Originally designed to create small farms for individual Navajos, the irrigation project has grown into a single 110,000-acre corporate agribusiness, the land's management has fallen out of the grasp of individual Navajos, and the idea of subsistence farming has been plowed under for the planting of major money-making crops. (NQ)

7 CFR 1755.903 - Fiber optic service entrance cables.

Science.gov (United States)

2010-01-01

... in a duct, or for buried installations by trenching, direct plowing, directional or pneumatic boring... user can reasonably expect that the average bi-directional loss of a fusion splice to be ≤0.1 dB. (5... for qualification of initial and subsequent changes in thermal reel wraps. (i) Sample selection. All...

Special zone territory decontamination

International Nuclear Information System (INIS)

Samojlenko, Yu.N.; Golubev, V.V.

1989-01-01

Special zone is the Chernobyl' NPP operating site (OS). OS decontamination is described including reactor ruins from the accident moment. The process was begun from reactor bombardment with absorbing and filtering materials (sand, clay, lead, boron compounds). Then were produced soil shovelling, territory filling by dry concrete and laying concrete layer with thickness up to 300 mm. NPP room and equipment decontamination is described. 3 figs.; 3 tabs

Symposium on Engineering With Nuclear Explosives January 14-16, 1970 Las Vegas, Nevada. Volume 2

Science.gov (United States)

1970-05-01

stainless steel funnel over an enamel tub. Every attempt was made to slowly wet all the surfaces with no jetting, hydraulic washing, or mechanical...If the signals of shovel tooth wear and bucket filling factors indicate this, then drilling for high-explosive blasting will commence. Benches are...furnace. The whole range of states between undamaged granite and glass is indeed found : 1 - granite may be only whitened . The iron oxydes naturally

Fire and drought in paradise – Say it isn’t so, Smokey

Science.gov (United States)

Douglas Cram; Susan Cordell; James B. Friday; Christian Giardina; Creighton M. Litton; Eric Moller; Elizabeth Pickett

2013-01-01

The last two summers have resulted in historic wildfire activity on the US mainland – 8.2 and 9.1 million acres burned in 2011 and 2012, respectively (National Interagency Fire Center 2012). Unfortunately for Smokey Bear, who may be looking for an opportunity to hang up his shovel for a surfboard for a few months, a trip way out west to the Hawaiian Islands would not...

MRI findings of type II sacral agenesis: A case report and literature review

Energy Technology Data Exchange (ETDEWEB)

Lee, Sang A; Kim, Myung Soon; Kwon, Woo Cheol [Dept. of Radiology, Yonsei University Wonju College of Medicine, Wonju Severance Christian Hospital, Wonju (Korea, Republic of)

2016-07-15

Sacral agenesis (or caudal regression syndrome) is a rare congenital anomaly involving various levels of coccygeal, sacral, and even lumbar or lower thoracic vertebral dysgenesis, as well as spinal cord abnormalities. A few cases have been previously reported in Korea, especially based upon MRI findings. We describe a case of a 4-year-old girl with partially bilateral agenesis of the sacrum (type II), and club-shaped (chisel-shaped) spinal cord disruption. We also review MRI findings of sacral agenesis, focused on classification and radiological findings.

Effects of different tillage and straw return on soil organic carbon in a rice-wheat rotation system.

Directory of Open Access Journals (Sweden)

Liqun Zhu

Full Text Available Soil management practices, such as tillage method or straw return, could alter soil organic carbon (C contents. However, the effects of tillage method or straw return on soil organic C (SOC have showed inconsistent results in different soil/climate/cropping systems. The Yangtze River Delta of China is the main production region of rice and wheat, and rice-wheat rotation is the most important cropping system in this region. However, few studies in this region have been conducted to assess the effects of different tillage methods combined with straw return on soil labile C fractions in the rice-wheat rotation system. In this study, a field experiment was used to evaluate the effects of different tillage methods, straw return and their interaction on soil total organic C (TOC and labile organic C fractions at three soil depths (0-7, 7-14 and 14-21 cm for a rice-wheat rotation in Yangzhong of the Yangtze River Delta of China. Soil TOC, easily oxidizable C (EOC, dissolved organic C (DOC and microbial biomass C (MBC contents were measured in this study. Soil TOC and labile organic C fractions contents were significantly affected by straw returns, and were higher under straw return treatments than non-straw return at three depths. At 0-7 cm depth, soil MBC was significantly higher under plowing tillage than rotary tillage, but EOC was just opposite. Rotary tillage had significantly higher soil TOC than plowing tillage at 7-14 cm depth. However, at 14-21 cm depth, TOC, DOC and MBC were significantly higher under plowing tillage than rotary tillage except for EOC. Consequently, under short-term condition, rice and wheat straw both return in rice-wheat rotation system could increase SOC content and improve soil quality in the Yangtze River Delta.

Thermal properties of typical chernozems in Kursk Oblast

Science.gov (United States)

Arkhangel'skaya, T. A.; Velichenko, M. V.; Tikhonravova, P. I.

2016-10-01

Thermal diffusivity and heat capacity of virgin and plowed heavy loamy typical chernozems of Kursk oblast were studied. Thermal diffusivity was determined in the course of step-by-step drying of the initially capillary-saturated samples to the air-dry state. Specific heat capacity was determined for absolutely dry samples. Volumetric heat capacity was calculated according to the de Vries equation. Thermal diffusivity varied within the ranges of (1.15-3.46) × 10-7 m2/s in the Ap horizon, (1.14-3.35) × 10-7 m2/s in the A1 horizon, (1.49-3.70) × 10-7 m2/s in the AB horizon, (1.49-3.91) × 10-7 m2/s in the B1 horizon, and (1.60-3.80) × 10-7 m2/s in the Bca horizon. The thermal diffusivity vs. water content dependencies had distinct maximums and were flattened in the range of low water contents. The maximums were most pronounced for the mineral B1 and Bca horizons; for the A1 and Ap horizons, the curves were rather S-shaped. Volumetric heat capacity of the air-dry soils varied from 0.96 J/(cm3 K) in the A1 horizon to 1.31 J/(cm3 K) in the Bca horizon; in the state of capillary saturation, it varied from 2.79 J/(cm3 K) in the A1 horizon to 3.28 J/(cm3 K) in the Bca horizon. Thermal properties of topsoil horizons were higher in the plowed chernozem compared with the virgin chernozem, which is explained by an increase in the bulk density and a decrease in the organic matter content in the plowed soil.

Post-fire hydrologic response in Central Portugal. A four years study at microplot scale.

Science.gov (United States)

Vieira, Diana; Malvar, Maruxa; Martins, Martinho; Machado, Ana; Nunes, João; Keizer, Jacob

2014-05-01

Wildfires are a natural phenomenon in regions with a Mediterranean-type climate. However, their present-day widespread occurrence in southern Europe is unprecedented and strongly reflects human activity such as ignition, land-use changes, land abandonment and introduction of highly flammable plantations. Besides wildfires, post-fire management practices such as plowing, terracing, clearcutting and logging should also be considered, since their occurrence is getting increasingly common. And, in a long-term period these practices seem to be executed intercalated with repeated fire occurrences in the same site, sharing the impacts together with fire in an escalated degradational effect. In this sense, the work presented here concerns four years of runoff and erosion data at microplot scale after the wildfire, comparing different land management practices that occurred before the fire. Preliminary results indicate that in four years of monitoring, runoff is constantly higher in plowed sites than in the unplowed ones, with the exception of the first year. Regarding soil losses the plowed plots present always higher sediment rates than the unplowed ones. The comparison between two unplowed sites with different land uses, indicate higher runoff and erosion risk for pine comparatively to the eucalypt ones, however the reduced soil depth in the first can have an important role in these differences. Following these facts, the aim of the present work is to answer the following research questions: i) Do these four years of observations fit with the window of disturbance model presented by Prosser and Williams (1998). or the alternative version by Wittenberg and Inbar (2009)?; ii) Does pre-fire disturbances (wildfire, land use changes and land management practices) still have repercussions after wildfire?; In what sense does four years of intensive monitoring provides that one year couldn't provide?

Research Article

African Journals Online (AJOL)

2017-09-01

Sep 1, 2017 ... According to the results, the comparative analysis between the .... J Fundam Appl Sci. 2017, 9(3), 1485-1496. Table 01. Equipment used for the soil. Fig.2. Technical plowing t and analysis: sture measurement pf3. %. 100. A B ... SD treatment, soil structure is preserved following a single direct sowing pass.

Grassroots Supercomputing

CERN Multimedia

Buchanan, Mark

2005-01-01

What started out as a way for SETI to plow through its piles or radio-signal data from deep space has turned into a powerful research tool as computer users acrosse the globe donate their screen-saver time to projects as diverse as climate-change prediction, gravitational-wave searches, and protein folding (4 pages)

Mecanismos de abertura do sulco e adubação nitrogenada no cultivo do feijoeiro em sistema plantio direto Furrows opening mechanism for nitrogen fertilizer application in common bean crop under no-tillage

Directory of Open Access Journals (Sweden)

Orivaldo Arf

2008-01-01

Full Text Available Algumas culturas têm pouca adaptação ao sistema plantio direto, em vista da maior compactação da camada superficial do solo e, nesse caso, o mecanismo utilizado na semeadora para a abertura dos sulcos para deposição do fertilizante pode ter grande importância no sentido de facilitar a penetração das raízes. Este experimento foi desenvolvido em Selvíria (MS, com o objetivo de avaliar a produtividade do feijão de inverno cultivado em sistema plantio direto, em função da utilização de mecanismos de abertura para distribuição de fertilizantes na semeadura e da adubação nitrogenada em cobertura. O delineamento experimental utilizado foi em blocos casualizados, utilizando-se esquema fatorial 2 x 6, constituído por mecanismos de distribuição de fertilizante (haste escarificadora e disco duplo e doses de N em cobertura (0, 25, 50, 75, 100 e 125 kg ha-1, com quatro repetições. Recomenda-se o uso da haste escarificadora como mecanismo de distribuição do fertilizante, para o cultivo do feijoeiro de inverno. A adubação nitrogenada em cobertura proporciona incrementos à produtividade do feijoeiro de inverno.Some crops have shown no adaptation to no-tillage system as a function of compaction soil superficial layer. In way, the mechanism used in seeder to open furrows for deposition of fertilizer can have great importance to facilitate the penetration of roots. This experiment was carried in Selvíria (MS, with the objective to evaluate the winter common bean crop yield under no-tillage system, as function of fertilizer distribution opening mechanisms in sowing (chisel and coulter blade and sidedressing nitrogen application (0, 25, 50, 75, 100 and 125 kg ha-1. The experimental design was a randomized block, arranged in a 2 x 6 factorial scheme, constituted by fertilizer distribution opening mechanisms in sowing (chisel and coulter blade and sidedressing nitrogen doses (0, 25, 50, 75, 100 and 125 kg ha-1, with four replications

A new marine reptile from the Triassic of China, with a highly specialized feeding adaptation

Science.gov (United States)

Cheng, Long; Chen, Xiao-Hong; Shang, Qing-Hua; Wu, Xiao-Chun

2014-03-01

The Luoping fauna (Anisian, Middle Triassic) is probably the oldest of Triassic faunas in Guizhou-Yunnan area, China. The reptilian assemblage is comprised of ichthyosaurs, a number of sauropterygians (pachypleurosaur-like forms), saurosphargids, protorosaurs, and archosauriforms. Here, we report on a peculiar reptile, newly found in this fauna. Its dentition is fence or comb-like and bears more than 175 pleurodont teeth in each ramus of the upper and lower jaws, tooth crown is needle-like distally and blade-shaped proximally; its rostrum strongly bends downward and the anterior end of its mandible expands both dorsally and ventrally to form a shovel-headed structure; and its ungual phalanges are hoof-shaped. The specializations of the jaws and dentition indicate that the reptile may have been adapted to a way of bottom-filter feeding in water. It is obvious that such delicate teeth are not strong enough to catch prey, but were probably used as a barrier to filter microorganisms or benthic invertebrates such as sea worms. These were collected by the specialized jaws, which may have functioned as a shovel or pushdozer (the mandible) and a grasper or scratcher (the rostrum). Our preliminary analysis suggests that the new reptile might be more closely related to the Sauropterygia than to other marine reptiles.

A new marine reptile from the Triassic of China, with a highly specialized feeding adaptation.

Science.gov (United States)

Cheng, Long; Chen, Xiao-Hong; Shang, Qing-Hua; Wu, Xiao-Chun

2014-03-01

The Luoping fauna (Anisian, Middle Triassic) is probably the oldest of Triassic faunas in Guizhou-Yunnan area, China. The reptilian assemblage is comprised of ichthyosaurs, a number of sauropterygians (pachypleurosaur-like forms), saurosphargids, protorosaurs, and archosauriforms. Here, we report on a peculiar reptile, newly found in this fauna. Its dentition is fence or comb-like and bears more than 175 pleurodont teeth in each ramus of the upper and lower jaws, tooth crown is needle-like distally and blade-shaped proximally; its rostrum strongly bends downward and the anterior end of its mandible expands both dorsally and ventrally to form a shovel-headed structure; and its ungual phalanges are hoof-shaped. The specializations of the jaws and dentition indicate that the reptile may have been adapted to a way of bottom-filter feeding in water. It is obvious that such delicate teeth are not strong enough to catch prey, but were probably used as a barrier to filter microorganisms or benthic invertebrates such as sea worms. These were collected by the specialized jaws, which may have functioned as a shovel or pushdozer (the mandible) and a grasper or scratcher (the rostrum). Our preliminary analysis suggests that the new reptile might be more closely related to the Sauropterygia than to other marine reptiles.

Intensive archaeological survey of the F/H Surface Enhancement Project Area, Savannah River Site, Aiken and Barnwell Counties, South Carolina

Energy Technology Data Exchange (ETDEWEB)

Sassaman, K.E.; Gillam, J.C.

1993-08-01

Twelve archaeological sites and four artifact occurrences were located by intensive survey of two tracts of land for the F and H Surface Enhancement Project on the Savannah River Site, Aiken and Barnwell Counties, South Carolina. Fieldwork in the 480-acre project area included surface reconnaissance of 3.6 linear kilometers of transects, 140 shovel tests along 4.2 linear kilometers of transects, an additional 162 shovel tests at sites and occurrences, and the excavation of six l {times} 2 m test units. All but one of the sites contained artifacts of the prehistoric era; the twelfth site consists of the remains of a twentieth-century home place. The historic site and six of the prehistoric sites consist of limited and/or disturbed contexts of archaeological deposits that have little research potential and are therefore considered ineligible for nomination to the National Register of Historic Places (NRHP). The remaining five sites have sufficient content and integrity to yield information important to ongoing investigations into upland site use. These sites (38AK146, 38AK535, 38AK539, 38AK541, and 38AK543) are thus deemed eligible for nomination to the NRHP and the Savannah River Archaeological Research Program (SRARP) recommends that they be preserved through avoidance or data recovery.

Changes in the status of harvested rice fields in the Sacramento Valley, California: Implications for wintering waterfowl.

Science.gov (United States)

Miller, Michael R.; Garr, Jay D.; Coates, Peter S.

2010-01-01

Harvested rice fields provide critical foraging habitat for wintering waterfowl in North America, but their value depends upon post-harvest treatments. We visited harvested ricefields in the Sacramento Valley, California, during the winters of 2007 and 2008 (recent period) and recorded their observed status as harvested (standing or mechanically modified stubble), burned, plowed, or flooded. We compared these data with those from identical studies conducted during the 1980s (early period). We documented substantial changes in field status between periods. First, the area of flooded rice increased 4-5-fold, from about 15% to >40% of fields, because of a 3-4-fold increase in the percentage of fields flooded coupled with a 37-41% increase in the area of rice produced. Concurrently, the area of plowed fields increased from 35% of fields, burned fields declined from about 40% to 1%, and fields categorized as harvested declined from 22-54% to rice field status survey in the Sacramento Valley and other North American rice growing regions as appropriate to support long-term monitoring programs and wetland habitat conservation planning for wintering waterfowl.

The Study of the Composite Material Go/CF/PTFE Tribological Property

Directory of Open Access Journals (Sweden)

Wang Li-hu

2017-01-01

Full Text Available In this paper, the composite material Go/CF/PTFE tribological property was studied. The test of its mechanical property, and the fabrication of the filled PTEE composite material sample which is based on the technology of cold press molding and sinter molding proved that adding Go and CF moderately to the composite material was an efficient way to improve its mechanical property. Meanwhile the process of friction and wear trial and SEM analysis results of the micro-structure of wear pattern proved that the addition of the Go and CF tremendously improved the anti-wear property and that after the addition the plowing effect which took place on the material surface would turn into a kind of mixed wear effect that includes plowing effect and fatigue wear. Working as pinning and bridging, the Go which distributing uniformly in the matrix was able to improve the resistance and substantially resisted the crack propagation, therefore to a certain degree enhanced the intensity of composite material and prolong its lifespan.

Relationships between Fungal Biomass and Nitrous Oxide Emission in Upland Rice Soils under No Tillage and Cover Cropping Systems.

Science.gov (United States)

Zhaorigetu; Komatsuzaki, Masakazu; Sato, Yoshinori; Ohta, Hiroyuki

2008-01-01

The relationships between soil microbial properties and nitrous oxide emission were examined in upland soil under different tillage systems [no tillage (NT), rotary and plow tillage] and cover crop systems (fallow, cereal rye, and hairy vetch) in 2004 and 2005. Microbiological analyses included the determination of soil ergosterol as an indicator of fungal biomass, bacterial plate counting, and MPN estimations of ammonia oxidizers and denitrifiers. The combined practice of NT with rye-cover crop treatment increased fungal biomass but not bacterial populations in 0-10 cm deep soils. Such increase in fungal biomass was not found in 10-20 cm and 20-30 cm deep cover-cropped NT soil. The combined practice of NT with rye-cover cropping resulted in higher in situ N(2)O emission rates compared with rotary- and plow-till treatments. N(2)O flux was positively correlated with soil ergosterol content but not with denitrifier MPN and other soil chemical properties. These results suggested a significant contribution of fungi to N(2)O emission in cover-cropped NT soils.

Crop and Soil Responses to Using Corn Stover as a Bioenergy Feedstock: Observations from the Northern US Corn Belt

Directory of Open Access Journals (Sweden)

Jane M. F. Johnson

2013-02-01

Full Text Available Corn (Zea mays L. stover is a potential bioenergy feedstock, but little is known about the impacts of reducing stover return on yield and soil quality in the Northern US Corn Belt. Our study objectives were to measure the impact of three stover return rates (Full (~7.8 Mg ha−1 yr−1, Moderate (~3.8 Mg ha−1 yr−1 or Low (~1.5 Mg ha yr−1 Return on corn and soybean (Glycine max. L [Merr.] yields and on soil dynamic properties on a chisel-tilled (Chisel field, and well- (NT1995 or newly- (NT2005 established no-till managed fields. Stover return rate did not affect corn and soybean yields except under NT1995 where Low Return (2.88 Mg ha−1 reduced yields compared with Full and Moderate Return (3.13 Mg ha−1. In NT1995 at 0–5 cm depth, particulate organic matter in Full Return and Moderate Return (14.3 g kg−1 exceeded Low Return (11.3 g kg−1. In NT2005, acid phosphatase activity was reduced about 20% in Low Return compared to Full Return. Also the Low Return had an increase in erodible-sized dry aggregates at the soil surface compared to Full Return. Three or fewer cycles of stover treatments revealed little evidence for short-term impacts on crop yield, but detected subtle soil changes that indicate repeated harvests may have negative consequences if stover removed.

ASK Procedure for Instrumented Pre-cracked Charpy-Type Tests

International Nuclear Information System (INIS)

Varga, T.; Njo, D.H.; Prantl, G.

1981-01-01

The essential technical content of the ASK procedure originated from development work in Switzerland since 1963, and practical experiences gained since 1972. The remainder of the content and the format of the procedure are based on the ASTM E 24.03.03. (Tentative Draft Copy) 'Proposed Method for Pre-cracked Charpy Impact and Slow-Bend Testing of Metallic Materials' by C. E. Harbower, 1973. Two different velocities, 5 m/s and 0.1 m/s were used with a Schnadt-type machine of rigid construction. The stiffness of the machine proved to be very suitable for instrumented testing. The instrumented Schnadt-Type machine was equipped with strain gauges both on the top of the pendulum and on the chisel. A static force calibration was followed by energy calibration, comparing potential energy losses with the area under the force-deflection curve. Deflection was measured using a high frequency eddy current method on the pendulum, and for slow testing by means of an inductive gauge on the chisel. Charpy-Type specimens of 1.0 mm max notch depth and 0.12 mm max notch radius were pre-cracked using a resonant fatigue testing machine, or an eccentric drive machine. Crack propagation rate da/dN was measured using 'Russenberger' measuring gauges. In addition a new technique for the detection of dynamic crack initiation, developed at the Institute of Research and Technology (TVFA) in Vienna is discussed and some results presented

Force and flow at the onset of drag in plowed granular media.

Science.gov (United States)

Gravish, Nick; Umbanhowar, Paul B; Goldman, Daniel I

2014-04-01

We study the transient drag force FD on a localized intruder in a granular medium composed of spherical glass particles. A flat plate is translated horizontally from rest through the granular medium to observe how FD varies as a function of the medium's initial volume fraction, ϕ. The force response of the granular material differs above and below the granular critical state, ϕc, the volume fraction which corresponds to the onset of grain dilatancy. For ϕϕc, FD rapidly rises to a maximum and then decreases over further displacement. The maximum force for ϕ>ϕc increases with increasing drag velocity. In quasi-two-dimensional drag experiments, we use granular particle image velocimetry (PIV) to measure time resolved strain fields associated with the horizontal motion of a plate started from rest. PIV experiments show that the maxima in FD for ϕ>ϕc are associated with maxima in the spatially averaged shear strain field. For ϕ>ϕc the shear strain occurs in a narrow region in front of the plate, a shear band. For ϕϕc, surface particles move only during the formation of the shear band, coincident with the maxima in FD, after which the particles remain immobile until the sheared region reaches the measurement region.

"Old Oxen Cannot Plow": Stereotype Themes of Older Adults in Turkish Folklore.

Science.gov (United States)

Marcus, Justin; Sabuncu, Neslihan

2016-12-01

Although much research has established the nature of attitudes and stereotypes toward older adults, there are conflicting explanations for the root cause of ageism, including the sociocultural view and interpersonal views, that age bias against older adults is uniquely a product of modernity and occurs through social interactions, and the evolutionary view and intraindividual views, that age bias against older adults is rooted in our naturally occurring and individually held fear of death. We make initial investigations into resolving this conflict, by analyzing literature from a society predating the Industrial Revolution, the society of Ottoman Turks. Using Grounded Theory, we analyzed 1,555 Turkish fairy tales of the most well-known older adult in Turkish folklore, Nasreddin Hoca, for stereotype themes of older adults. Using the same method, we then analyzed 22,000+ Turkish sayings and proverbs for the same themes. Results indicated older adults to be viewed both positively and negatively. Positive stereotypes included wisdom, warmth, deserving of respect, and retirement. Negative stereotypes included incompetence, inadaptability, and frailty/nearing of death. Older females were viewed more negatively relative to older males. Results indicated views of older adults to parallel those found in contemporary research. Results have implications for the design of interventions to reduce ageism and on the cross-cultural generalizability of age-based stereotypes. © The Author 2015. Published by Oxford University Press on behalf of The Gerontological Society of America. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

Response to Oil Sands Products Assessment

Science.gov (United States)

2015-09-01

clothing , and eye protection. The MSDS for natural gas condensate for Oneok (2009) warns that condensate, being denser than air, will accumulate in...with shovels and clippers and plastic bags collecting all this stuff.” Detergents were ineffective, Hamilton said (Schulte, 2013). 3.4.5 Lack of...oil, are pumped to these basins—or ponds— where settling occurs and water is recycled for reuse in the process. When the ponds are no longer required

Management information systems in NCL - a pragmatic approach

Energy Technology Data Exchange (ETDEWEB)

Mittal, R.L.; Singh, M.K. [Northern Coalfields Limited, Sidhi (India)

2000-05-01

An information system named 'Information Retrieval System' (IRS) has been developed by Northern Coalfields Ltd., India, as a management information system for monitoring use of shovels, dumpers, draglines, diesel, lubricants, power, explosives and overtime expenditure. Reports are generated at regular intervals on production and consumption (if diesel, lubricant, power, explosives, overtime) and used to gauge overall performance of the coal mining operations. The present system is in Lotus 123 worksheefs. 2 apps.

49 CFR 393.25 - Requirements for lamps other than head lamps.

Science.gov (United States)

2010-10-01

... listed in paragraph (c) of this section. If motor vehicle equipment (e.g., mirrors, snow plows, wrecker...: J586—Stop Lamps for Use on Motor Vehicles Less Than 2032 mm in Overall Width, March 2000; J2261 Stop Lamps and Front- and Rear-Turn Signal Lamps for Use on Motor Vehicles 2032 mm or More in Overall Width...

Fire management ramifications of Hurricane Hugo

Science.gov (United States)

J. M. Saveland; D. D. Wade

1991-01-01

Hurricane Hugo passed over the Francis Marion National Forest on September 22, 1989, removing almost 75 percent of the overstory. The radically altered fuel bed presented new and formidable challenges to fire managers. Tractor-plows, the mainstay of fire suppression, were rendered ineffective. The specter of wind-driven escaped burns with no effective means of ground...

Land use change effects on forest carbon cycling throughout the southern United States

Science.gov (United States)

Peter B. Woodbury; Linda S. Heath; James E. Smith

2006-01-01

We modeled the effects of afforestation and deforestation on carbon cycling in forest floor and soil from 1900 to 2050 throughout 13 states in the southern United States. The model uses historical data on gross (two-way) transitions between forest, pasture, plowed agriculture, and urban lands along with equations describing changes in carbon over many decades for each...

Resistência mecânica do solo e força de tração em hastes sulcadoras de semeadoras-adubadoras em sistema de integração lavoura-pecuária Mechanical resistance of soil and traction force by planter chisel type openers in crop-livestock system

Directory of Open Access Journals (Sweden)

Osmar Conte

2008-12-01

. Treatments consisted of four grazing intensities, which resulted in pasture heights of 10; 20; 30 and 40 cm, and a no-grazed area used as blank, designed in randomized blocks with three replicates. After the grazing period and during soybean sowing, RP was evaluated; also, required power to openers chisel type coulter was measured. Both parameters increased with increments in grazing intensity. There was correlation between both parameters, showing that it is possible to evaluate the condition of soil´s compaction by measuring draft requirement by fertilizer furrow openers.

Perdas de fósforo e potássio por erosão hídrica em um inceptisol sob chuva natural Phosphorus and potassium losses by water erosion in an inceptisol under natural rainfall

Directory of Open Access Journals (Sweden)

I. Bertol

2004-06-01

, accelerating environmental degradation. The P and K losses caused by water erosion were evaluated from November 1999 to October 2001 in an Inceptisol with 0.102 m m-1 slope, in Lages, Santa Catarina State, Brazil, under natural rainfall conditions. The evaluated soil management systems were: no-tillage for six years (NT6, no-tillage for nine years (NT9, chiseling plus one disking for nine years (C + D9, and plowing plus disking twice for nine years (P + D9. All of these treatments were carried out in duplicate. One experimental plot was cultivated with bean, vetch, corn, and oat in rotation, and the other with soybean, wheat, soybean, and wheat in succession. An additional treatment consisted of bare soil (control, which was periodically tilled with plowing plus disking twice for nine years (BS9. The P and K contents were determined in runoff water and sediments. Both P and K concentrations were higher in runoff water and sediments under the conservation soil tillage than under conventional soil tillage. Total K losses were higher in the runoff water than in the sediment, except in the BS9 treatment. Regarding P losses, they were higher in water than sediment only in the NT6 and NT9 tillage. In the runoff water, the total P losses were higher in NT6 and NT9 tillage, while the K losses varied with conservational tillage and conventional tillage, with no clear trend. Potassium losses in the runoff sediment were smaller in conservational tillage, but those of P were only smaller in NT6 and NT9 treatments.

Rétablissement de la capacité de production de sorgho (Sorghum bicolor [L.] Moench d'un vertisol dégradé dans la région de l'Extrême Nord du Cameroun

Directory of Open Access Journals (Sweden)

Mvondo-Awono, JP.

2013-01-01

Full Text Available Recovery of sorghum (Sorghum bicolor [L.] Moench production capacity in degraded vertisols in the Far North Region of Cameroon. In Northern Cameroon, degraded soils represent 10 to 20% of arable land. Recovering the production capacity of these degraded soils is one of the main challenges faced by agriculture in the region. The objective of the present study, conducted from 2007 to 2009, was to examine the possibility of growing sorghum on degraded and bare vertisols. A combination of the following techniques was used in a randomized complete block design: two land preparation techniques (plowing or mounding, two levels of cow dung dust (6 or 12 t·ha-1 and three rates of urea application (0, 50 or 100 kg·ha-1. The soil was sampled at a depth of up to 25 cm and was analyzed for its properties following standard analytical procedures. Critical levels established for tropical soils were used to declare sufficiency or deficiency of soil nutrients within the samples. Sorghum straw and grain yields were obtained and analyzed. Soil characteristics were found to be similar to those of other degraded vertisols found in the Far North Region of Cameroon. The hard top soil layer was found to be unfavorable to the establishment of sorghum. On the other hand, levels of organic carbon (0.85% and the sum of cations (4.91 meq·100 g-1 of soil were found to be favorable. The ratio of cations was found to be unfavorable to Ca. Available phosphorus (5.35 mg·kg-1 of soil and total N (0.04 g·kg-1 were very low. Following the application of treatments, 2.4 to 3.5 t·ha-1 of sorghum straw were produced and 1.3 to 2.8 t·ha-1 of grain were harvested during the experimental period. Soil plowing and mounding successfully disturbed the hard top soil layer. Soil mounding resulted into in a 16% increase in straw production in comparison with soil plowing alone. The application of 12 t·ha-1 of cow dung dust produced an additional grain yield of 17% in 2008 and of 39% in

Environmental propagation of noise in mines and nearby villages: A study through noise mapping

Directory of Open Access Journals (Sweden)

Veena D Manwar

2016-01-01

Full Text Available Background: Noise mapping being an established practice in Europe is hardly practiced for noise management in India although it is mandatory in Indian mines as per guidelines of the Directorate General of Mines Safety (DGMS. As a pilot study, noise mapping was conducted in an opencast mine with three different models; one based on the baseline operating conditions in two shifts (Situation A, and two other virtual situations where either production targets were enhanced by extending working hours to three shifts (Situation B or only by increased mechanization and not changing the duration of work (Situation C. Methods: Noise sources were categorized as point, line, area, and moving sources. Considering measured power of the sources, specific meteorological and geographical parameters, noise maps were generated using Predictor LimA software. Results: In all three situations, Lden values were 95 dB(A and 70–80 dB(A near drill machine and haul roads, respectively. Noise contours were wider in Situation C due to increase in frequency of dumpers. Lden values near Shovel 1 and Shovel 2 under Situation B increased by 5 dB and 3 dB, respectively due to expansion of working hours. In Situation C, noise levels were >82 dB(A around shovels. Noise levels on both sides of conveyor belts were in the range of 80–85 dB(A in Situations A and C whereas it was 85–90 dB(A in Situation B. Near crusher plants, it ranged from 80 to 90 dB(A in Situations A and C and between 85 and 95 dB(A in Situation B. In all situations, noise levels near residential areas exceeded the Central Pollution Control Board (CPCB limits, i.e., 55 dB(A. Conclusions: For all situations, predicted noise levels exceeded CPCB limits within the mine and nearby residential area. Residential areas near the crusher plants are vulnerable to increased noise propagation. It is recommended to put an acoustic barrier near the crusher plant to attenuate the noise propagation.

The Use of Soil in Criminal Investigations

Science.gov (United States)

Dawson, Lorna; Fitzpatrick, Robert

2013-04-01

Forensic soil science, as a newly developed discipline of soil science, has matured to the extent that well-defined questions and successful crime scene investigations are being addressed in increasingly refined ways to assist law enforcement agencies. Soils, rocks, regolith, minerals and man-made mineral particles such as bricks (i.e. referred to "human-made" soil materials) are being used in specialised forensic investigations to associate/disassociate a sample taken from an item, such as shoes, clothing, shovel or vehicle, with a specific location. The majority of forensic cases involving soil materials are usually overwhelmingly complex, and the challenges of associating relevant information from one source with another, often requires the use and development of sophisticated field and laboratory methods. Through examples from case studies, this presentation will demonstrate how advanced field and laboratory approaches have been critical in developing coherent, predictive, soil models, from landscape to microscopic scales, to help contribute to soil-based criminal investigations in both Australia and Scotland. To demonstrate the critical importance of soil materials in forensic investigations, the following 2 case studies, which tackle difficult problems at a range of scales involving highly complex issues, will be presented: •The use of soil evidence to help solve a double murder case. This investigation used morphological, chemical, physical and mineralogical properties to identify similarities between soil-regolith found on a shovel taken from the suspect's vehicle and wetland soil-regolith subsequently located in the bottom of a quarry (Fitzpatrick and Raven, 2012). •The use of soil and related material to help search and to provide evidence in a murder case. This investigation used soil mineralogical and organic properties to identify similarities between sand found on a shovel and sand subsequently located at a beach. Results illustrate the benefit of

Age-class separation of blue-winged ducks

Science.gov (United States)

Hohman, W.L.; Moore, J.L.; Twedt, D.J.; Mensik, John G.; Logerwell, E.

1995-01-01

Accurate determination of age is of fundamental importance to population and life history studies of waterfowl and their management. Therefore, we developed quantitative methods that separate adult and immature blue-winged teal (Anas discors), cinnamon teal (A. cyanoptera), and northern shovelers (A. clypeata) during spring and summer. To assess suitability of discriminant models using 9 remigial measurements, we compared model performance (% agreement between predicted age and age assigned to birds on the basis of definitive cloacal or rectral feather characteristics) in different flyways (Mississippi and Pacific) and between years (1990-91 and 1991-92). We also applied age-classification models to wings obtained from U.S. Fish and Wildlife Service harvest surveys in the Mississippi and Central-Pacific flyways (wing-bees) for which age had been determined using qualitative characteristics (i.e., remigial markings, shape, or wear). Except for male northern shovelers, models correctly aged lt 90% (range 70-86%) of blue-winged ducks. Model performance varied among species and differed between sexes and years. Proportions of individuals that were correctly aged were greater for males (range 63-86%) than females (range 39-69%). Models for northern shovelers performed better in flyway comparisons within year (1991-92, La. model applied to Calif. birds, and Calif. model applied to La. birds: 90 and 94% for M, and 89 and 76% for F, respectively) than in annual comparisons within the Mississippi Flyway (1991-92 model applied to 1990-91 data: 79% for M, 50% for F). Exclusion of measurements that varied by flyway or year did not improve model performance. Quantitative methods appear to be of limited value for age separation of female blue-winged ducks. Close agreement between predicted age and age assigned to wings from the wing-bees suggests that qualitative and quantitative methods may be equally accurate for age separation of male blue-winged ducks. We interpret annual

Simulation of Stress-Strain State of Shovel Rotary Support Kingpin

Science.gov (United States)

Khoreshok, A. A.; Buyankin, P. V.; Vorobiev, A. V.; Dronov, A. A.

2016-04-01

The article presents the sequence of computational simulation of stress-strain state of shovel’s rotary support. Computation results are analyzed, the kingpin is specified as the most loaded element, maximum stress zones are identified. Kingpin design modification such as enhancement of fillet curvature radius to 25 mm and displacement of eyebolt holes on the diameter of 165 mm are proposed, thus diminishing impact of stress concentrators and improving reliability of the rotary support.

Anticipating Stimulus Money for Campus Projects, Colleges Get "Shovel Ready"

Science.gov (United States)

Carlson, Scott

2009-01-01

Help for colleges may be on the way in the $825-billion stimulus package being pressed by Congressional leaders. The bill that House Democrats introduced this month includes $7-billion for higher-education modernization, renovation, and repair that could kick-start projects like upgrading heating and cooling systems, fixing roofs, and doing…

Demonstration and Validation of a High-Performance Floor-Sealant System to Reduce Concrete Degradation

Science.gov (United States)

2015-05-01

1 Recycled Antifreeze 01-197-7692 MIL-PRF-10924H GAA Grease 01-102-9455 MIL-PRF-46176B Brake Fluid 00-252-6383 MIL-PRF-5606H Hydraulic Fluid H515...contaminated clothing , clean thoroughly before reuse. Inhalation: Move to fresh air. If not breathing, give rescue breathing. I f breathing is...material to absorb the spill, use plastic shovel to pick up absorbent for disposal Spills and Leaks: Dispose in accordance to local, state or federal

Analysis on uranium resource situations and metallogenic potential of Heyuan mineralization belt of Guangdong province

International Nuclear Information System (INIS)

Chen Zhuhai; Zheng Mingliang; Song Shizhu; Liang Yewu; Zhao Wei

2008-01-01

Heyuan mineralization belt is a structure-magmatic activities belt which is charcterized by strong plastic deformation and shearing. The squeeze (overthrust) structure is formed early. Later stretch produced slide shovel-shaped normal fault which control the red basin and uranium mineralization. Comprehensive study shows that this area is of favorable uranium metallogenic condition due to the rich uranium source and higher degree of geology work, it is a target for the new round resources exploration. (authors)

C-STARS Baltimore Simulation Center Military Trauma Training Program: Training for High Performance Trauma Teams

Science.gov (United States)

2013-09-19

simulation room and intermittent access to conference and debriefing space. While the C-STARS program had priority for access to this space, it had to...Input (if required) Skin cool to touch Temp: 35.8 C FAST positive for splenic injury 500 mL blood in vac • Correctly interpret radiography...shoveling snow and the pain continued. He is moderately obese , does not exercise, uses EtOH frequently and has a 35-year hx of tobacco use

Efeito residual do calcário sob diferentes modos de incorporação antes da instalação do sistema plantio direto Residual effect of lime under different types of incorporation before the installation of a no-tillage system

Directory of Open Access Journals (Sweden)

Renato de M. Prado

2003-12-01

split plot arrangement was used. The main plots were constituted by mode of incorporation of the lime: heavy disc plows (14 discs of 34" and disc harrows (60 discs of 22"; traditional way, with disc plow (4 discs of 26" and disc harrows; superheavy disc plows (14 discs of 34" and disc harrows; in split plots, the doses of lime: 0, 6.0 and 9.2 t ha-1 were studied. The incorporation of the lime occurred in May/1995, and in the subsequent agricultural years black oats (1995/96 and maize (1996/97 were cultivated in no-tillage system. In year 1997/98, the residual effect on the production of soybeans was evaluated. The incorporated lime at the occasion of the installation of the no-tillage system had positive residual effect in the production of soybeans. The deep incorporation of the lime was more effective with use of the superheavy disc plows and the heavy disc plows revealed inefficient.

Chopping and webbing control saw-palmetto in south Florida

Science.gov (United States)

Clifford E. Lewis

1972-01-01

Saw-palmetto is one of the more troublesome plants growing in south Florida, and its control is often desirable in programs of range and timber management. Both cross-chopping and webbing (root plowing) proved to be effective control measures, but webbing appeared to be less effective on a moist site. Many other shrubs were also effectively reduced by these treatments...

Chemical Weed Control Increases Survival and Growth in Hardwood Plantings

Science.gov (United States)

Gayne G. Erdmann

1967-01-01

In a plantation of four hardwood species on a silt loam soil planted to 1-0 stock, 4 pounds of active atrazine or simazine controlled weeds effectively without injuring the trees. Chemical weed control was better on plowed and disked ground than on unprepared ground. Yellow-poplar and white ash grew faster on prepared ground. Black walnut and red oak did not respond...

A proposal of Transport System Improvement in exploiting and processing of raw materials

Directory of Open Access Journals (Sweden)

Ján Sciranko

2006-09-01

Full Text Available In handling earth, aggregate rock, ore, coal and other materials, trucks serve one purpose. They are hauling units which, because of their high speed when operating on suitable roads, have high capacities and provide relatively low hauling costs.They provide a high degree of flexibility as their number may be decreased or increased easily to permit modifications in the total hauling capacity of a fleet.In cyclic operations, the two principal operations are loading and haulage with hoisting as a third optional. In continuous operations, where machines combine the breakage and handling functions, cutting, drilling and blasting are eliminated and extraction and loading are performed in a single operation or function (excavation, e.g. the bucket wheel excavator, auger, highwall mines, continuous miner or the boring machine.Materials handling in modern mechanized mining is equipment oriented. Unit operations are characterized by, and sometimes identified with, an equipment that performs them. Thus the field terminology refers to a mining shovel, stripping dragline or the coal loader. From time to time the mining engineer is faced with the necessity to make a haulage study to determine not only the most suitable method of hauling materials, but also the most effective and economical type of equipment used for the operation. Key words: truck haulage, material handling, mining shovel

Environmental impact assessment - baseline noise survey and noise impact assessment for Aurora Mine

International Nuclear Information System (INIS)

Yee, S.

1996-01-01

A noise impact assessment was conducted at Syncrude's proposed Aurora Mine site to comply with Alberta Energy and Utilities Board (AEUB) Noise Control Directive ID 94-4. Noise assessments were conducted near a major noise source, i.e. the hydraulic and electric shovels. Noise levels at 50 meters away from the source varied from 72.3 to 79.7 dBA. The worst case noise level was 75 dBA measured at 100 meters away from a hydraulic shovel. This assessment was used to calculate the predicted design sound level from a noise source at the nearest or most impacted occupied dwelling. Two cabins located near the access road and along Kearl Lake respectively, were identified as the most impacted and nearest dwellings to the mine site. The predicted sound level at one cabin was 43 dBA, and 55 dBA at the other. Fort McKay was also assessed because it is the nearest community to the mine site. The sound level at Fort McKay was predicted to be 34 dBA. These results indicate that the sound level from Aurora Mine is not in compliance with the AEUB Noise Control Directive. Attenuation measures are required to reduce the noise to acceptable level at Cabin A and B. Predicted sound level at Fort McKay is lower than the permitted sound level

Le aree rurali dell’Appennino Ligure tra età romana e tardomedioevo. Ricerche storiche e archeologiche in alta Valle Scrivia / The rural areas of the Ligurian Appennines between Roman period and the Late Middle Ages. Historical and archaeological research in Valle Scrivia

Directory of Open Access Journals (Sweden)

Giovanni Battista Parodi

2015-12-01

Full Text Available La ricerca è incentrata sull’analisi delle forme e delle dinamiche del popolamento, delle strutture e dell’organizzazione del territorio dell’alta Valle Scrivia (area appenninica ubicata tra Genova e la pianura che mai è stata oggetto di ricerche sistematiche tra la tarda antichità e il XV secolo, alla luce delle fonti storiche, cartografiche e archeologiche. In particolare, la realizzazione di indagini di superficie e shovel tests ha consentito di ampliare e approfondire la conoscenza del comprensorio nel periodo in esame, fornendo interessanti spunti per lo studio delle aree rurali appenniniche. Gli elementi raccolti sono confl uiti all’interno di un database e di una piattaforma GIS appositamente creata. The research focuses on the analysis of settlement forms and dynamics, structures and organisation of upper Valle Scrivia (an area in the Apennines located between Genoa and the Po Valley that has never been the object of systematic studies between Late Antiquity and the 15th century in light of historical, cartographic and archaeological sources. In particular, carrying out surface surveys and shovel tests allowed to widen and increase the knowledge of the area in the period examined and provided interesting ideas for the study of rural areas in the Apennines. The elements that were gathered were inserted into a database and a GIS platform created on purpose.

Evaluasi Kinerja Tarik Traktor Tangan dengan Bahan Bakar Minyak Kelapa Murni

Directory of Open Access Journals (Sweden)

Desrial

2010-04-01

Full Text Available Past research shown that coconut oil can be used directly in Diesel engine by adding a heating element in the fuel delivery system. This study aims to evaluate the performance of a hand tractor pull using pure coconut oil fuel. The Diesel engine of the tractor was equipped with a fuel heater installed on the mufler. Traction performance parameters tested were wheel slippage, drawbar pull, forward speed and drawbar power on the path of concrete and soil. Besides, the tractor was also tested on plowing using a moldboard plow. The test results on the concrete track showed that the maximum drawbar pull was 1.21 kN generated at a speed of 0.92 m/s, with a maximum drawbar power of 1.21 kW at the wheel slip of 10.87%. While the drawbar pull on the soil track was 1.37 kN at a speed of 0.79 m/s, with a maximum value of 0.71 kW drawbar power when wheels slip 22.25%. The results of tillage test showed that field efficiency was 84.66%, which was not much different from the test result using Diesel fuel.

Soils in an agricultural landscape of Jokioinen, south-western Finland

Directory of Open Access Journals (Sweden)

M. YLI-HALLA

2008-12-01

Full Text Available Eleven pedons in an agricultural landscape at elevations 80-130 m above sea level in Jokioinen, south-western Finland were investigated and classified according to Soil Taxonomy, the FAO-Unesco system (FAO, and the World Reference Base for Soil Resources system (WRB. The soils were related to geomorphology of the landscape which is characterized by clayey fields and forested bedrock high areas covered with glacial till. A Spodosol/Podzol was found in a coarse-sandy soil in an esker while the sandy loam in a bedrock high area soils did not have an E horizon. A man-made mollic epipedon was found in a cultivated soil which had a sandy plow layer while clayey plow layers were ochric epipedons. Cambic horizons, identified by structure and redox concentrations, were common in cultivated soils. In a heavy clay soil, small slickensides and wedge-shaped aggregates, i.e., vertic characteristics, were found. Histosols occurred in local topographic depressions irrespective of the absolute elevation. According to the three classification systems, the following catenas are recognized: Haplocryods - Dystro/Eutrocryepts -Haplocryolls - Cryaquepts - Cryosaprists (Soil Taxonomy, Podzols - Regosols - Cambisols - Histosols (FAO-Unesco, and Podzols - Cambisols - Phaeozems - Gleysols - Histosols (WRB.;

[Litter decomposition and nutrient release in Acacia mangium plantations established on degraded soils of Colombia].

Science.gov (United States)

Castellanos-Barliza, Jeiner; León Peláez, Juan Diego

2011-03-01

Several factors control the decomposition in terrestrial ecosystems such as humidity, temperature, quality of litter and microbial activity. We investigated the effects of rainfall and soil plowing prior to the establishment of Acacia mangium plantations, using the litterbag technique, during a six month period, in forests plantations in Bajo Cauca region, Colombia. The annual decomposition constants (k) of simple exponential model, oscillated between 1.24 and 1.80, meanwhile k1 y k2 decomposition constants of double exponential model were 0.88-1.81 and 0.58-7.01. At the end of the study, the mean residual dry matter (RDM) was 47% of the initial value for the three sites. We found a slow N, Ca and Mg release pattern from the A. mangium leaf litter, meanwhile, phosphorus (P) showed a dominant immobilization phase, suggesting its low availability in soils. Chemical leaf litter quality parameters (e.g. N and P concentrations, C/N, N/P ratios and phenols content) showed an important influence on decomposition rates. The results of this study indicated that rainfall plays an important role on the decomposition process, but not soil plowing.

[Effects of heavy machinery operation on the structural characters of cultivated soils in black soil region of Northeast China].

Science.gov (United States)

Wang, En-Heng; Chai, Ya-Fan; Chen, Xiang-Wei

2008-02-01

With the cultivated soils in black soil region of Northeast China as test objects, this paper measured their structural characters such as soil strength, bulk density, and non-capillary porosity/capillary porosity (NCP/CP) ratio before and after heavy and medium-sized machinery operation, aimed to study the effects of machinery operation on the physical properties of test soils. The results showed that after machinery operation, there existed three distinct layers from top to bottom in the soil profiles, i.e., plowed layer, cumulative compacted layer, and non-affected layer, according to the changes of soil strength. Under medium-sized machinery operation, these three layers were shallower, and there was a new plow pan at the depth between 17.5 and 30 cm. Heavy machinery operation had significant positive effects on the improvement of topsoil structure (P heavy machinery, the bulk density of topsoil decreased by 7.2% and 3.5%, respectively, and NCP/CP increased by 556.6% after subsoiling, which would benefit water infiltration, reinforce water storage, and weaken the threat of soil erosion. The main action of heavy machinery operation was soil loosening, while that of medium-sized machinery operation was soil compacting.

Investigating Alkylsilane Monolayer Tribology at a Single-Asperity Contact with Molecular Dynamics Simulation.

Science.gov (United States)

Summers, Andrew Z; Iacovella, Christopher R; Cummings, Peter T; McCabe, Clare

2017-10-24

Chemisorbed monolayer films are known to possess favorable characteristics for nanoscale lubrication of micro- and nanoelectromechanical systems (MEMS/NEMS). Prior studies have shown that the friction observed for monolayer-coated surfaces features a strong dependence on the geometry of contact. Specifically, tip-like geometries have been shown to penetrate into monolayer films, inducing defects in the monolayer chains and leading to plowing mechanisms during shear, which result in higher coefficients of friction (COF) than those observed for planar geometries. In this work, we use molecular dynamics simulations to examine the tribology of model silica single-asperity contacts under shear with monolayer-coated substrates featuring various film densities. It is observed that lower monolayer densities lead to reduced COFs, in contrast to results for planar systems where COF is found to be nearly independent of monolayer density. This is attributed to a liquid-like response to shear, whereby fewer defects are imparted in monolayer chains from the asperity, and chains are easily displaced by the tip as a result of the higher free volume. This transition in the mechanism of molecular plowing suggests that liquid-like films should provide favorable lubrication at single-asperity contacts.

CITA Working for and with material performance

DEFF Research Database (Denmark)

Ramsgaard Thomsen, Mette

2011-01-01

The understanding of materials as active, whether compressed, under tension or flexed while handled, is at the root of all craft traditions. The ability to work a material, to saw and chisel wood, to weld and hammer steel or to weave and knit yarn relies on a profound understanding of its...... performance. The soft flex of wood, the sprung stiffness of steel and the tensile elasticity of yarn are inherent properties that inform and shape our crafts traditions. It is through material understanding that we come to shape the world of artefacts and structure that surrounds us....

Remote-operated systems for interventions in civil nuclear facilities

International Nuclear Information System (INIS)

Bonneville, A.

1999-01-01

This short paper is a presentation of the aerial and terrestrial means developed by the Intra Group specialized in interventions in the case of nuclear accidents and incidents. The aerial means consist in a airborne system called Helinuc and which can perform spectro-gamma measurements over surfaces of about 15 km 2 using an 'Ecureuil'-type helicopter. The terrestrial means comprise different types of robots for surveys, sampling, manipulation, various works etc.. and remote-controlled caterpillar tractors, shovels and dumper trucks. (J.S.)

Horses--Haulers, Racers, and Healers

Science.gov (United States)

McIntosh, Phyllis

2014-01-01

Providing healing support for everyone from an autistic child to a wounded veteran is just the latest addition to the horse's 5,000-year-old résumé. No animal has played a greater role in human history. Horses have carried us into war, pulled our loads, plowed our fields, and transported us over all kinds of terrain. Freed of such drudgery by…

Determination of plasma Z-pinch effect by intrinsic stimulated emission

International Nuclear Information System (INIS)

Lue, J.T.; Liang, J.M.

1977-01-01

The plasma Z-pinch behavior has been observed in a relatively small-bore diameter tube and low bank voltage discharge system. The instant of the occurrence of the laser line at 4880 A coincides with the plasma pinch time calculated by using a one-fluid snow-plow model. A determination of plasma pinch parameters by measuring the intrinsic stimulated emission of the ions is described

Environmental Assessment for Integrated Natural Resources Management Plan Activities at Eglin Air Force Base, Florida

Science.gov (United States)

2013-01-28

raise the equipment to prevent connecting the line directly to the water body. ● Do not construct firelines which act as drainage systems ...firelines which act as drainage systems , particularly those that might connect or drain isolated wetlands. ● Avoid constructing plowed firelines in...Floridan aquifer. The surficial aquifer system at CSB is recharged through direct infiltration of rainwater , and consists of a relatively Affected

Technical and experimental investigations of a plasma focus neutron source

International Nuclear Information System (INIS)

Rapp, H.K.

The results obtained from two plasma-focus devices of different size allow to report on the technical and physical properties of such neutron flash sources. The results of some diagnostic methods used for the control of the gas discharge and for the measurement of the neutron production are included. The planning of plasma focus devices is illustrated with the aid of snow-plow calculations

Vallerani Micro-Catchment Infiltration Dynamics and Erosion from Simulated Rainfall and Concentrated Flow

Science.gov (United States)

Founds, M. J.; McGwire, K.; Weltz, M.

2017-12-01

Critical research gaps in rangeland hydrology still exist on the impact of conservation practices on erosion and subsequent mobilization of dissolved solids to streams. This study develops the scientific foundation necessary to better understand how a restoration strategy using a Vallerani Plow can be optimized to minimize erosion from rainfall impact and concentrated flow. Use of the Vallerani system has been proposed for use in the Upper Colorado River Basin (UCRB), where rapidly eroding rangelands contribute high salt loads to the Colorado River at a significant economic cost. The poster presentation will document the findings from a series of physical rainfall and concentrated flow simulations taking place at an experimental site northeast of Reno, NV in early August. A Walnut Gulch Rainfall simulator is used to apply variable intensity and duration rainfall events to micro-catchment structures created by the Vallerani Plow. The erosion and deposition caused by simulated rainfall will be captured from multi-angle photography using structure from motion (SFM) to create sub-centimeter 3-D models between each rainfall event. A rill-simulator also will be used to apply large volumes of concentrated flow to Vallerani micro-catchments, testing the point at which their infiltration capacity is exceeded and micro-catchments are overtopped. This information is important to adequately space structures on a given hillslope so that chances of failure are minimized. Measurements of saturated hydraulic conductivity and sorptivity from a Guelph Permeameter will be compared to the experimental results in order to develop an efficient method for surveying new terrain for treatment with the Vallerani plow. The effect of micro-catchments on surface flow and erosion will eventually be incorporated into the process-based Rangeland Hydrology and Erosion Model (RHEM) to create a tool that provides decision makers with quantitative estimates of potential reductions in erosion when

The influence of mountain meadow management on the occurence of Puccinia perplexans Plow

Czech Academy of Sciences Publication Activity Database

Voženílková, B.; Marková, J.; Klimeš, F.; Květ, Jan; Mašková, Z.

2008-01-01

Roč. 115, č. 4 (2008), s. 167-171 ISSN 1861-3829 R&D Projects: GA ČR(CZ) GA206/99/1410 Institutional research plan: CEZ:AV0Z60870520 Keywords : Alopecurus pratensis * fallow stand * mown stand * mulched stand * rust fungi Subject RIV: EF - Botanics Impact factor: 0.566, year: 2008

Treating bituminous shale

Energy Technology Data Exchange (ETDEWEB)

Ginet, J H

1921-03-09

Apparatus for the treatment of bituminous shales is described wherein a number of separate compartments are arranged in alignment and communicate with each other near the bottom thereof, each of the compartments being provided with outlets for the gases evolved therein, while agitators are arranged in each of the compartments, each agitator being composed of a number of shovels which sweep up the comminuted shale at their forward end and discharge it at their rearward end into the path of the next adjacent agitator.

Hail creek

Energy Technology Data Exchange (ETDEWEB)

Chadwick, J.

2005-09-01

The paper examines the development of one of the largest coking coal deposits in the world. Hail Creek is 100 km west of Mackay and 35 km northeast of Nebo, Queensland and has proven opencut reserves of 195.6 as at December 2003. Coal processing stated in July 2003. The award winning project included construction of a coal handling and preparation plant, a railway, a village and offsite infrastructure and mine buildings and site services. Coal is mined by conventional dragline and truck/shovel techniques. 1 photo.

The Advanced Research Projects Agency, 1958-1974

Science.gov (United States)

1975-12-01

to the story. Apparently when John- son arrived he had no strong views on the laboratory question, and some of his advisos argued forcefully in favor...spent months seeking a container that could hold "nuc mom " and "nam pla," the fermented fish sauces that are staples in Vietnam and Thai diets (and were...Acknowledging that the Agency was theoretically vulnerable to too much cronyism, incest , small in-groups, "shoveling out the money," etc.,’he said that ARPA

Proceedings of the twenty-fourth annual conference on explosives and blasting technique

Energy Technology Data Exchange (ETDEWEB)

1998-01-01

Papers of interest to the coal industry include: death of a coal shovel; deep hole blasting with SMS (site-mix slurry system); trend of bulk explosives in India; bottomhole annular pressure - a theoretical problem with real effects; maximizing rotary blast hole drills; explosive energy concept for drill productivity and higher overall productivity at reduced excavation costs; large diameter presplitting improved through two novel techniques; avoiding tragedy - lessons to be learned from a flyrock fatality; and an economic analysis of cast blasting compared to other stripping alternatives.

Small-unit Training for Adaptability and Resilience in Decision Making (STAR-DM)

Science.gov (United States)

2017-01-23

Alternatives 1 Orange Truck As the roadblock comes into the squad’s view, an orange dump truck drives away from the trash pile.  Do not...L- shape blocking position, makeshift control measures set up. A dump truck came up and wasn’t trying to plow through, but did cross control...Co-PI) 407-706-0977, kelly@designinteractive.net Subcontractors/Consultants: Cognitive Performance Group (CPG), Pacific Science & Engineering

Smart Farming: A Transdisciplinary Data Revolution for Agriculture

OpenAIRE

Brym, Zack

2018-01-01

This is a presentation for the 1st University of Florida Data Symposium.Major advances in knowledge and technology have transformed farming throughout history; examples include the plow, selective breeding, chemical fertilization, mechanized cultivation, and genetically modified organisms. Systems that integrate these advances are often billed as revolutions for the benefits they deliver to farmers and the food system. Yet, advancements in agriculture are only beginning to respect the collect...

The influence of local- and landscape-level factors on wetland breeding birds in the Prairie Pothole Region of North and South Dakota

Science.gov (United States)

Igl, Lawrence D.; Shaffer, Jill A.; Johnson, Douglas H.; Buhl, Deborah A.

2017-08-17

We examined the relationship between local- (wetland) and landscape-level factors and breeding bird abundances on 1,190 depressional wetlands in the Prairie Pothole Region of North and South Dakota during the breeding seasons in 1995–97. The surveyed wetlands were selected from five wetland classes (alkali, permanent, semipermanent, seasonal, or temporary), two wetland types (natural or restored), and two landowner groups (private or Federal). We recorded 133 species of birds in the surveyed wetlands during the 3 years. We analyzed the nine most common (or focal) species (that is, species that were present in 25 percent or more of the 1,190 wetlands): the Red-winged Blackbird (Agelaius phoeniceus), Blue-winged Teal (Anas discors), Mallard (Anas platyrhynchos), American Coot (Fulica americana), Gadwall (Anas strepera), Common Yellowthroat (Geothlypis trichas), Yellow-headed Blackbird (Xanthocephalus xanthocephalus), Northern Shoveler (Anas clypeata), and Savannah Sparrow (Passerculus sandwichensis). Our results emphasize the ecological value of all wetland classes, natural and restored wetlands, and publicly and privately owned wetlands in this region, including wetlands that are generally smaller and shallower (that is, temporary and seasonal wetlands) and thus most vulnerable to drainage. Blue-winged Teal, Northern Shoveler, Gadwall, Common Yellowthroat, and Red-winged Blackbird had higher abundances on Federal than on private wetlands. Abundances differed among wetland classes for seven of the nine focal species: Blue-winged Teal, Northern Shoveler, Mallard, American Coot, Common Yellowthroat, Yellow-headed Blackbird, Red-winged Blackbird. American Coot had higher abundances on restored wetlands than on natural wetlands overall, and Gadwall and Common Yellowthroat had higher abundances on private restored wetlands than on private natural wetlands. The Common Yellowthroat was the only species that had higher abundances on restored private wetlands than on

Estimating natal dispersal movement rates of female European ducks with multistate modeling

Science.gov (United States)

Blums, P.; Nichols, J.D.; Hines, J.E.; Lindberg, M.S.; Mednis, A.

2003-01-01

1. We used up to 34 years of capture-recapture data from about 22,100 new releases of day-old female ducklings and multistate modelling to test predictions about the influence of environmental, habitat and management factors on natal dispersal probability of three species of ducks within the Engure Marsh, Latvia. 2. The mean natal dispersal distances were very similar (c . 0?6-0?7 km) for all three species and were on average 2?7 times greater than breeding dispersal distances recorded within the same study system. 3. We were unable to confirm the kinship hypothesis and found no evidence that young first-nesting females nested closer to their relatives (either mother or sister) than to the natal nest. 4. Young female northern shovelers, like adults, moved from small islands to the large island when water level was high and vice versa when water level was low before the construction of elevated small islands. Movement probabilities between the two strata were much higher for young shovelers than adults, suggesting that young birds had not yet developed strong fidelity to the natal site. Movements of young female tufted ducks, unlike those of shovelers, were not dependent on water level fluctuations and reflected substantial flexibility in choice of first nesting sites. 5. Data for young birds supported our earlier conclusion that common pochard nesting habitats in black-headed gull colonies were saturated during the entire study period. Young females, like the two adult age groups, moved into and out of colonies with similar probability. Fidelity probability of female pochards to each stratum increased with age, being the lowest (0?62) for young (DK) females, intermediate (0?78) for yearlings (SY) and the highest (0?84) for adult (ASY) females. 6. Young female tufted ducks, like adults, showed higher probabilities of moving from islands to emergent marshes when water levels were higher both before and after habitat management. The relationship between the spring

Increased resistance to sudden noise by audio stimulation during early ontogeny in German shepherd puppies.

Directory of Open Access Journals (Sweden)

Helena Chaloupková

Full Text Available The period of early ontogeny constitutes a time when the physical immaturity of an organism is highly susceptible to external stimuli. Thus, early development plays a major role in shaping later adult behavior. The aim of the study was to check whether stimulating puppies at this early stage in life with sound would improve their responsiveness towards unfamiliar noises during the selection process of the police behavioral test for puppies. The cohort comprised 37 puppies from the litters of three mothers. At the commencement of the experiment the dogs were aged 16 days, rising to the age of 32 days at its close. The mothers and litters of the treatment group were either exposed to radio broadcasts, (see below; three litters totaling 19 puppies, while the control group was not exposed to any radio programs (eight litters totaling 18 puppies. All three mothers had previously experienced both auditory circumstances, as described herein. Ordinary radio broadcasts were played to the puppies in the treatment group three times a day for 20 minute periods, always during feeding time. The cohort was subjected to the so-called Puppy Test, i.e. analysis of the potential of each animal, once the dogs had reached the age of 7 weeks. Such tests included exposure to a sudden noise caused by a shovel (100 dB, noise when alone in a room, and response to loud distracting stimuli (the latter two at 70 dB. Said tasks were rated by the same analyst on a scale of 0-5 points; the better the response of the dog, the higher the score given. The differences between the treatment and control groups were analyzed via Mixed Models (PROC MIXED in SAS. The animals comprising the treatment group responded with a higher score to the sudden noise caused by the shovel than the control dogs (P<0.01. Interestingly, gender was seen to affect response, with the males scoring more than the females (P<0.1. In conclusion, the results suggested that audio stimulation early in life

Pre-operative simulation of periacetabular osteotomy via a three-dimensional model constructed from salt

Directory of Open Access Journals (Sweden)

Fukushima Kensuke

2017-01-01

Full Text Available Introduction: Periacetabular osteotomy (PAO is an effective joint-preserving procedure for young adults with developmental dysplasia of the hip. Although PAO provides excellent radiographic and clinical results, it is a technically demanding procedure with a distinct learning curve that requires careful 3D planning and, above all, has a number of potential complications. We therefore developed a pre-operative simulation method for PAO via creation of a new full-scale model. Methods: The model was prepared from the patient’s Digital Imaging and Communications in Medicine (DICOM formatted data from computed tomography (CT, for construction and assembly using 3D printing technology. A major feature of our model is that it is constructed from salt. In contrast to conventional models, our model provides a more accurate representation, at a lower manufacturing cost, and requires a shorter production time. Furthermore, our model realized simulated operation normally with using a chisel and drill without easy breakage or fissure. We were able to easily simulate the line of osteotomy and confirm acetabular version and coverage after moving to the osteotomized fragment. Additionally, this model allowed a dynamic assessment that avoided anterior impingement following the osteotomy. Results: Our models clearly reflected the anatomical shape of the patient’s hip. Our models allowed for surgical simulation, making realistic use of the chisel and drill. Our method of pre-operative simulation for PAO allowed for the assessment of accurate osteotomy line, determination of the position of the osteotomized fragment, and prevented anterior impingement after the operation. Conclusion: Our method of pre-operative simulation might improve the safety, accuracy, and results of PAO.

Effect of Tillage Systems with Corn Residue on Grain Yield of Rapeseed in Moghan Region

Directory of Open Access Journals (Sweden)

J Taghinazhad

2014-09-01

Full Text Available This study carried out to evaluate the effect of different tillage systems on rapeseed yield (hayola 401 planted in corn residues. This experiment was done in Moghan region with clay soils during 2009-2012. Different seedbed preparation methods include MT: moldboard + disk tillage (conventional tillage was included, SCT: Stem Crusher + chisel + disk tandem harrow, STT: Stem Crusher + double-disc, CT: chisel + disk tillage and DD: two heavy disks. The experiment was conducted in a randomized complete block design with four replications. The results showed that soil bulk density in the 0-10 cm layer was not significant in different tillage treatments, but it was significantly higher than the conventional tillage in 10-20 cm depth. However, penetration resistance in 10-30 cm under DD was significantly higher than other treatments, but it was not significant in 0-10 cm layer among all tillage treatments. Thus, Comparison of the soil bulk density, penetration resistance, and plant establishment showed that the reduced tillage in canola seedbed preparation was effective. Besides, the surveys indicated that there was a significant different between MWD after primary and secondary tillage. The mean diameter weighted under SCT and DD, were 1.19 and 1.24 cm, respectively had the best status. The highest value and the worst status of this parameter observed for MT which was 1.92 cm. The highest rate of grain yield obtained by application of treatment SCT, and it was 2563.8 kg ha-1, The SCT treatment can be recommended as an effective canola bed preparation due to its significant saving in time and cost after corn harvesting.

"Shovel-Ready" Data: The Stimulus Package and State Longitudinal Data Systems

Science.gov (United States)

Ewell, Peter T.

2009-01-01

The American Reinvestment and Recovery Act, commonly referred to simply as "the stimulus package," is poised to pump over $100 billion into U.S. public education in the next few years. This allocation reflects the Obama administration's new commitment to education as a public good, which is embodied in President Obama's ambitious goal of…

'Shovel-Ready' applications of stem cell advances for pediatric heart disease.

Science.gov (United States)

Files, Matthew D; Boucek, Robert J

2012-10-01

The past decade has seen remarkable advances in the field of stem cell biology. Many new technologies and applications are passing the translational phase and likely will soon be relevant for the clinical pediatric cardiologist. This review will focus on two advances in basic science that are now translating into clinical trials. The first advance is the recognition, characterization, and recent therapeutic application of resident cardiac progenitor cells (CPCs). Early results of adult trials and scattered case reports in pediatric patients support expanding CPC-based trials for end-stage heart failure in pediatric patients. The relative abundance of CPCs in the neonate and young child offers greater potential benefits in heart failure treatment than has been realized to date. The second advance is the technology of induced pluripotent stem cells (iPSCs), which reprograms differentiated somatic cells to an undifferentiated embryonic-like state. When iPSCs are differentiated into cardiomyocytes, they model a patient's specific disease, test pharmaceuticals, and potentially provide an autologous source for cell-based therapy. The therapeutic recruitment and/or replacement of CPCs has potential for enhancing cardiac repair and regeneration in children with heart failure. Use of iPSCs to model heart disease holds great potential to gain new insights into diagnosis, pathophysiology, and disease-specific management for genetic-based cardiovascular diseases that are prevalent in pediatric patients.

Teach Students to Dig for Understanding Using an Unexpected Technological Shovel

Science.gov (United States)

Lake, Susan E. L.

2004-01-01

Online genealogy tools is an unexpected resource as these tools not only serve valuable for genealogy research, but also can be used by students to learn about their country's past and learn to use primary materials to draw conclusions. Some of these Online sources like the 1880 census available at www.ancestry.com, www.thepastwhispers.com, which…

Nonmetric tooth crown traits in a Sri Lankan aboriginal Vedda population.

Science.gov (United States)

Peiris, H R D; Arambawatta, A K S; Hewapathirana, T N; Nanayakkara, C D; Chandrasekara, M; Wickramanayake, E

2011-12-01

This study was conducted to determine the frequencies of non-metric tooth crown traits of Vedda of Sri Lanka and to investigate the affinities of these morphological variations with those of other world populations. Fifty dental plaster casts were observed. The Arizona State University dental anthropology system was adopted for classification of the 16 traits observed. We used 13 traits to compare the Vedda and other world populations. Using the frequencies of 13 traits, Smith Mean Measure of Divergence was calculated to determine inter-population distances. Affinities among the Vedda and other world populations were expressed in two dimensions of the principal coordinate analysis. Cusp number in mandibular second molar and hypocone absence in maxillary second molar had the highest frequency at 95.9% and 93.8%, respectively. Shovelling, double shovelling in the maxillary central incisor and deflecting wrinkle in the mandibular first molar had the lowest frequency at 0%. The principal coordinate analysis showed that Sino American and Western Eurasian populations were separated in negative and positive directions in the first principal coordinate axis. Vedda located with the Western Eurasian population groups. Sahul and Sunda Pacific populations located in the intermediate position between Sino American and Western Eurasian populations. The dental phenotype of Vedda has close affinities with those of early south Asian populations. They are far different from Sino American and Sunda pacific populations. Vedda shows closer affinities to Sahul Pacific and South African (Bantu) populations. Copyright © 2011 Elsevier GmbH. All rights reserved.

Silvicultural manipulation and site effect on above and belowground biomass equations for young Pinus radiata

International Nuclear Information System (INIS)

Rubilar, Rafael A.; Allen, H. Lee; Alvarez, Jose S.; Albaugh, Timothy J.; Fox, Thomas R.; Stape, Jose L.

2010-01-01

There is little understanding of how silvicultural treatments, during the early stages of tree development, affect allometric relationships. We developed and compared stem, branch, foliage, coarse and fine root biomass, and leaf area estimation equations, for four-year-old genetically improved radiata pine trees grown on three contrasting soil-site conditions. At each site, selected trees were destructively sampled from a control (shovel planted, no weed control, fertilized with 2 g of boron), a shovel planted + weed control (2 first years) + complete fertilization (nitrogen + phosphorus + boron 2 first years + potassium 2nd year), and a soil tillage (subsoil at 60 cm) + weed control (first 2 years) + complete fertilization treatment. Tissues were separated into foliage, branch, stem, fine and coarse roots (>2 mm). Regression equations for each tree biomass tissue versus leaf area were fit for each site and compared among treatments and sites with the same genetic material. Our results indicated that individual tree biomasses for young plantations are affected by silvicultural treatment and site growing conditions. Higher variability in estimates was found for foliage and branches due to the ephemeral nature of these components. Stem biomass equations vary less, but differences in biomass equations were found among sites and treatments. Coarse root biomass estimates were variable but less than expected, considering the gradient among sites. Similar to stem biomass, a simple positive general linear relationship between root collar diameter, or diameter at breast height with coarse roots biomass was developed across sites and treatments.

Determinants of fuel consumption in mining trucks

International Nuclear Information System (INIS)

Dindarloo, Saeid R.; Siami-Irdemoosa, Elnaz

2016-01-01

Analysis of fuel consumption in a large surface mine, during more than 5000 cycles of material transportation, revealed considerable variability in the data. Truck fuel estimation based on the mining truck manufacturers' manuals/estimates is not capable of capturing this variability in the fuel consumption data. Partial least squares regression and autoregressive integrated moving average methods were employed to examine the effect of cyclic activities on fuel consumption, and to recommend relevant remedies for consumption reduction. Proper modifications of the operation can result in improved cycle times. Consequently, minimizing some cyclic activities would enhance energy efficiency. The truck “empty idle time” was a major contributor to unnecessary fuel consumption. Since the truck queues at shovels are a major component of the “empty idle time”, decisions should be reviewed to reduce the truck queues at loading points. Improved dispatching strategies, optimal muck pile shape and size distribution, and improved shovel/loader operator skills are effective preventive measures to minimize truck flow bottlenecks at loading points, and thus to improve energy efficiency at mines. - Highlights: • A large fleet of mining trucks consumes considerable amounts of energy. • Current energy models do not consider the effect of site-specific mining conditions. • A new methodology based on material handling cyclic activities is proposed. • Fuel consumption rates in different truck operating modes are determined. • The new model is compared with the truck manufacturer's energy consumption guideline.

Occurrence of Euplatypus parallelus, Euplatypus sp. (col.: Euplatypodidae and Xyleborus affinis (col.: Scolytidae in Pinus sp. in Ribas do Rio Pardo, Mato Grosso do Sul, Brazil

Directory of Open Access Journals (Sweden)

Zanuncio José Cola

2002-01-01

Full Text Available Wood borer species of the families Euplatypodidae and Scolytidae were observed attacking trees of Pinus sp. in the Municipality of Ribas do Rio Pardo, state of Mato Grosso do Sul, Brazil, in March 2000. This plantation had been previously burned in an accidental fire in January 2000, causing the trees to become partially or totally unhealthy, rendering them more susceptible to attack of these pests. Galleries of these wood borers were opened with a chisel to observe parameters such as their direction and form of these galleries. Species observed as wood borers of Pinus sp. were Euplatypus parallelus, Euplatypus sp. (Coleoptera: Euplatypodidae and Xyleborus affinis (Coleoptera: Scolytidae.

Selection of Excavators for Earth Work on the Basis of their Performance

Science.gov (United States)

Vondráčková, Terezie; Voštová, Věra

2017-10-01

For the specific construction of the reconstruction of the railway section Ostrov nad Oslavou and Žďár nad Sázavou will be done removed the railway superstructure and the partial adjustment of the substructure including drainage. For the earthwork will be used excavators of the company Komatsu, with the possibility of adjustment of parameters of the working tool - the length of the bracket and the volume of the shovel. The determined value will be purely indicative, as it does not affect how the operator of the excavator handles the discharge of cargo means.

The open-pit truck dispatching method based on the completion of production target and the truck flow saturation

Energy Technology Data Exchange (ETDEWEB)

Xing, J.; Sun, X. [Northeastern University, Shenyang (China)

2007-05-15

To address current problems in the 'modular dispatch' dynamic programming system widely used in open-pit truck real-time dispatching, two concepts for meeting production targets and truck flow saturation were proposed. Using truck flow programming and taking into account stochastic factors and transportation distance, truck real-time dispatching was optimised. The method is applicable to both shovel-truck match and mismatching and also to empty and heavy truck dispatching. In an open-pit mine the production efficiency could be increased by between 8% and 18%. 6 refs.

Productivity assessment of an opencast coal mine: a case study

Energy Technology Data Exchange (ETDEWEB)

Yadav, M.K.; Bhar, C. [Indian School of Mines, Dhanbad (India). Dept. of Management Studies

2006-07-01

An assessment was conducted at an opencast coalmine located in Jharia coalfield. The mine is using shovel-dumper combination for winning coal. The study covers the computation of partial productivities as well as total productivity status of the mine at an aggregate level whereas partial productivities highlight the efficiency in the use of various resources. A statistical analysis among the different productivity indices has been carried out to identify the criticality of different input factors. Accordingly appropriate strategies can be devised for improving productivity of the mine. 2 figs., 6 tabs.

Out of the sandbox - cohesive dragline planning

Energy Technology Data Exchange (ETDEWEB)

Cobcroft, T. [Marston & Marston Inc., St Louis, MO (United States)

2008-01-15

Since 1983, Southern Illinois University Carbondale (SIUC), through the Coal Research Center in Carterville, Illinois, has been engaged in operator, engineer, supervisor and manager training in the foundations, plan formulation, iteration and improvement in efficiency of dragline planning and operations. 3d-Dig is a 3-D modeling package used in SIUC's training program to simulate digging and dumping from truck-shovel, dozer-push and dragline operations. SIUC has a scale model dragline and dragline simulator available to assist course attendees with standard dig progressions and optimizing operator technique. 1 fig., 6 photos.

Temporal Dynamics of Soil Microbial Communities below the Seedbed under Two Contrasting Tillage Regimes

OpenAIRE

Florine Degrune; Florine Degrune; Nicolas Theodorakopoulos; Gilles Colinet; Marie-Pierre Hiel; Marie-Pierre Hiel; Bernard Bodson; Bernard Taminiau; Georges Daube; Micheline Vandenbol; Martin Hartmann

2017-01-01

Agricultural productivity relies on a wide range of ecosystem services provided by the soil biota. Plowing is a fundamental component of conventional farming, but long-term detrimental effects such as soil erosion and loss of soil organic matter have been recognized. Moving towards more sustainable management practices such as reduced tillage or crop residue retention can reduce these detrimental effects, but will also influence structure and function of the soil microbiota with direct conseq...

Historical Perspectives in Frost Heave Research: The Early Works of S. Taber and G. Beskow

Science.gov (United States)

1991-12-01

beginning of freezing. In addition, if the quite efficiently plowed by motor power, the effect of different types of soils are separated by a sharp...frozen clay is not greater than unfro- efficient forthe coarse soils (sand) in adry condition can zen clay, but in coarser soils, the coefficient of con...will reduce the heaving and smooth and slopes slightly outwards with depth. Forex - eliminate the frost boils. Of course, the effect of deep ample

Automated Vehicle Location (AVL) for Road Condition Reporting

OpenAIRE

McCullouch, Bob G.; Leung, Michelle; Kang, Wonjin

2009-01-01

This project developed an AVL system for INDOT that utilized the statewide wireless network, SAFE-T. This option was chosen after doing a cost analysis of commercial AVL systems that use cellular data communications. The system developed provides real time information collected during snow and ice removal. Information includes weather and road conditions, truck speed, amount of chemicals spread, time, location, plow position, and road temperature. This information is displayed on INDOT GIS ma...

Perdas por erosão no estado de S. Paulo A study of soil losses due to erosion in São Paulo

Directory of Open Access Journals (Sweden)

J. Quintiliano A. Marques

1961-01-01

Comprimento de rampa (100, 50 e 25 metros; e (8 Prática conservacionista em culturas anuais (Plantio morro abaixo, plantio em contorno, alternância de capinas e, faixas estreitas de cana.The authors present the general data obtained, in the first phase of work, by the Soil Conservation Section of the Instituto Agronômico of the São Paulo Stale (Brazil, from the year 1943/44 to the year 1958/59. These data were obtained in experimental plots having runoff catching tanks installed at different times, totalizing 108 at the present, from which 38 at Pindorama, 29 at Campinas, 13 at Mococa, and 28 at Ribeirão Prêto. In the first part of this paper the original data obtained in each of the groups of experimental plots are presented as annual averages of soil and water losses, together with a brief description of the runoff tanks used and the general characteristics of the treatments in comparison. In the second part general average data for the main treatments and studied practices are presented, in an attempt to obtain a better representation of the general average conditions of the State of São Paulo. By this way were studied the effects on the erosion losses from the following factors, the treatments being rolled up in a decreasing sequence of soil losses: (I Type of soil (sandy, clayish and «roxa»; (2 Soil tillage systems in corn crop (plowing twice with conventional moldboard plow, plowing once with conventional plow, and plowing once with subsurface plow ; (3 Organic matter incorporation in corn crops (burning the straw, velvet beans associated with corn turned under, green manure brought from outside, velvet beans associated with corn mulch left in the surface, and, manure; (4 Crop rotations (cotton, soybeans and corn; (5 Type of land use (cotton, coffee, pasture and woods; (6 Type of crop (castor beans, beans, cassava, peanuts, rice, cotton, soybeans, Irish potatoes, sugar cane, corn associated with beans, and, sweet potatoes; (7 Length of slope (100, 50 and 25

Effects of various debonding and adhesive clearance methods on enamel surface: an in vitro study.

Science.gov (United States)

Fan, Xiao-Chuan; Chen, Li; Huang, Xiao-Feng

2017-02-27

The purpose of this study was to evaluate orthodontic debonding methods by comparing the surface roughness and enamel morphology of teeth after applying two different debonding methods and three different polishing techniques. Forty eight human maxillary premolars, extracted for orthodontic reasons, were randomly divided into three groups. Brackets were bonded to teeth with RMGIC (Fuji Ortho LC, GC, Tokyo, Japan) (two groups, n = 18 each) after acid etching (30s), light cured for 40 s, exposed to thermocycling, then underwent 2 different bracket debonding methods: debonding pliers (Shinye, Hangzhou, China) or enamel chisel (Jinzhong, Shanghai, China); the third group (n = 12) comprised of untreated controls, with normal enamel surface roughness. In each debonded group, three cleanup techniques (n = 6 each) were tested, including (I) diamond bur (TC11EF, MANI, Tochigi, Japan) and One-Gloss (Midi, Shofu, Kyoto, Japan), (II) a Super-Snap disk (Shofu, Kyoto, Japan), and (III) One-Gloss polisher. The debonding methods were compared using the modified adhesive remnant index (ARI, 1-5). Cleanup efficiencies were assessed by recording operating times. Enamel surfaces were qualitatively and quantitatively evaluated with scanning electron microscopy (SEM) and surface roughness tester, respectively. Two surface roughness variables were evaluated: Ra (average roughness) and Rz (10-point height of irregularities). The ARI scores of debonded teeth were similar with debonding pliers and enamel chisel (Chi-square = 2.19, P > 0.05). There were significant differences between mean operating time in each group (F = 52.615, P One-Gloss took the shortest operating time (37.92 ± 3.82 s), followed by the Super-Snap disk (56.67 ± 7.52 s), and the One-Gloss polisher (63.50 ± 6.99 s). SEM appearance provided by the One-Gloss polisher was the closest to the intact enamel surface, and surface roughness (Ra: 0.082 ± 0.046 μm; Rz: 0.499�

Rendimento de grãos de soja em função de diferentes sistemas de manejo de solo e de rotação de culturas Soybean yield associated to different soil tillage methods and crop rotations systems

Directory of Open Access Journals (Sweden)

Henrique Pereira dos Santos

2006-02-01

Full Text Available O objetivo do presente trabalho foi avaliar sistemas de manejo de solo e de rotação de culturas sobre o rendimento de grãos e componentes do rendimento de soja durante seis anos. Foram comparados quatro sistemas de manejo de solo - 1 plantio direto, 2 cultivo mínimo, no inverno e semeadura direta, no verão, 3 preparo convencional de solo com arado de discos, no inverno e semeadura direta, no verão e 4 preparo convencional de solo com arado de aivecas, no inverno e semeadura direta, no verão - e três sistemas de rotação de culturas: sistema I (trigo/soja, sistema II (trigo/soja e ervilhaca/milho ou sorgo e sistema III (trigo/soja, ervilhaca/milho ou sorgo e aveia branca/soja. O delineamento experimental foi de blocos ao acaso, com parcelas subdivididas e três repetições. O rendimento de grãos e o peso de 1.000 grãos de soja cultivada sob plantio direto e sob cultivo mínimo foi superior ao de soja cultivada sob preparo convencional de solo com arado de discos e com arado de aivecas. A maior estatura de plantas de soja ocorreu no plantio direto. O rendimento de grãos de soja cultivada após trigo, no sistema II, foi superior ao de soja cultivada após aveia branca e após trigo, no sistema III, e após trigo, no sistema I. O menor rendimento de grãos, peso de grãos por planta de soja e peso de 1.000 grãos ocorreu quando em monocultura (trigo/soja.The objective of this six-year study was to assess the soil tillage systems and crop rotation systems on soybean grain and yield components were evaluated at Embrapa Trigo in Passo Fundo, RS, Brazil. Four soil tillage systems - 1 no-tillage, 2 minimum tillage in winter and no-tillage in summer, 3 conventional tillage with disk plow in winter and no-tillage in summer, and 4 tillage using a moldboard plow in winter and no-tillage in summer - and three crop rotation systems [system I (wheat/soybean, system II (wheat/soybean and common vetch/corn or sorghum, and system III (wheat

Efeito de práticas culturais sobre o rendimento e outras características agronômicas de trigo Effect of cultural practices on yield andagronomic characteristics of wheat

Directory of Open Access Journals (Sweden)

Henrique Pereira dos Santos

2006-01-01

Full Text Available O objetivo deste trabalho foi avaliar os efeitos de práticas culturais sobre o rendimento de grãos e algumas características agronômicas de plantas de trigo. Foram comparados quatro sistemas de manejo de solo, a saber: 1 plantio direto; 2 cultivo mínimo; 3 preparo convencional de solo com arado de discos mais grade de discos e 4 preparo convencional de solo com arado de aivecas mais grade de discos, e três sistemas de rotação de culturas: sistema I (trigo/soja, sistema II (trigo/soja e ervilhaca/milho ou sorgo e sistema III (trigo/soja, aveia branca/soja e ervilhaca/milho ou sorgo. O delineamento experimental foi em blocos ao acaso, com parcelas subdivididas e três repetições. A parcela principal foi constituída pelos sistemas de manejo de solo, e as subparcelas, pelos sistemas de rotação de culturas. O rendimento de grãos e a altura de plantas de trigo cultivadas sob plantio direto e sob cultivo mínimo foram superiores ao trigo cultivado sob preparo convencional de solo com arado de discos e arado de aivecas. A maior massa de mil grãos de trigo ocorreu no plantio direto. A rotação de culturas foi eficiente na redução de doenças do sistema radicular, resultando em aumento do rendimento de grãos de trigo. O menor rendimento de grãos, massa de grãos, massa de mil grãos e peso do hectolitro ocorreu quando trigo foi cultivado em monocultura (trigo/soja.The effects of soil management systems and winter crop rotation on wheat yield and root diseases were assessed. Four soil management systems: 1 no-tillage; 2 minimum tillage;3 conventional tillage using a disk plow plus disk harrow and 4 conventional tillage using a moldboard plow plus disk harrow, and three crop rotation systems [system I (wheat/soybean, system II (wheat/soybean and common vetch/corn or sorghum, and system III (wheat/soybean, white oats/soybean, and common vetch/corn or sorghum] were compared. A randomized block experimental design, whereas split-plots and

Effect of Interplanting with Zero Tillage and Straw Manure on Rice Growth and Rice Quality

Directory of Open Access Journals (Sweden)

Shi-ping LIU

2007-09-01

Full Text Available The interplanting with zero-tillage of rice, i.e. direct sowing rice 10–20 days before wheat harvesting, and remaining about 30-cm high stubble after cutting wheat or rice with no tillage, is a new cultivation technology in wheat-rice rotation system. To study the effects of interplanting with zero tillage and straw manure on rice growth and quality, an experiment was conducted in a wheat-rotation rotation system. Four treatments, i.e. ZIS (Zero-tillage, straw manure and rice interplanting, ZI (Zero-tillage, no straw manure and rice interplanting, PTS (Plowing tillage, straw manure and rice transplanting, and PT (Plowing tillage, no straw manure and rice transplanting, were used. ZIS reduced plant height, leaf area per plant and the biomass of rice plants, but the biomass accumulation of rice at the late stage was quicker than that under conventional transplanting cultivation. In the first year (2002, there was no significant difference in rice yield among the four treatments. However, rice yield decreased in interplanting with zero-tillage in the second year (2003. Compared with the transplanting treatments, the number of filled grains per panicle decreased but 1000-grain weight increased in interplanting with zero-tillage, which were the main factors resulting in higher yield. Interplanting with zero-tillage improved the milling and appearance qualities of rice. The rates of milled and head rice increased while chalky rice rate and chalkiness decreased in interplanting with zero-tillage. Zero-tillage and interplanting also affected rice nutritional and cooking qualities. In 2002, ZIS showed raised protein content, decreased amylose content, softer gel consistency, resulting in improved rice quality. In 2003, zero-tillage and interplanting decreased protein content and showed similar amylose content as compared with transplanting treatments. Moreover, protein content in PTS was obviously increased in comparison with the other three treatments

Eight years of Conservation Agriculture-based cropping systems research in Eastern Africa to conserve soil and water and mitigate effects of climate change

Science.gov (United States)

Araya, Tesfay; Nyssen, Jan; Govaerts, Bram; Lanckriet, Sil; Baudron, Frédéric; Deckers, Jozef; Cornelis, Wim

2014-05-01

In Ethiopia, repeated plowing, complete removal of crop residues at harvest, aftermath grazing of crop fields and occurrence of repeated droughts have reduced the biomass return to the soil and aggravated cropland degradation. Conservation Agriculture (CA)-based resource conserving cropping systems may reduce runoff and soil erosion, and improve soil quality, thereby increasing crop productivity. Thus, a long-term tillage experiment has been carried out (2005 to 2012) on a Vertisol to quantify - among others - changes in runoff and soil loss for two local tillage practices, modified to integrate CA principles in semi-arid northern Ethiopia. The experimental layout was a randomized complete block design with three replications on permanent plots of 5 m by 19 m. The tillage treatments were (i) derdero+ (DER+) with a furrow and permanent raised bed planting system, ploughed only once at planting by refreshing the furrow from 2005 to 2012 and 30% standing crop residue retention, (ii) terwah+ (TER+) with furrows made at 1.5 m interval, plowed once at planting, 30% standing crop residue retention and fresh broad beds, and (iii) conventional tillage (CT) with a minimum of three plain tillage operations and complete removal of crop residues. All the plowing and reshaping of the furrows was done using the local ard plough mahresha and wheat, teff, barley and grass pea were grown. Glyphosate was sprayed starting from the third year onwards (2007) at 2 l ha-1 before planting to control pre-emergent weeds in CA plots. Runoff and soil loss were measured daily. Soil water content was monitored every 6 days. Significantly different (pconstitute a field rainwater and soil conservation improvement strategy that enhances crop and economic productivity and reduces siltation of reservoirs, especially under changing climate. The reduction in draught power requirement would enable a reduction in oxen density and crop residue demand for livestock feed, which would encourage smallholder

XML Survey of the productivity loss due to heat stress in different tasks of farmers in Darreh Shahr city

Directory of Open Access Journals (Sweden)

M. R. Monazzam Esmaielpou

2015-09-01

Full Text Available Introduction: Heat is one of the hazardous physical agents in the workplace. Exposure to heat and consequent thermal stress influence workers productivity in addition to adverse health effects. The aim of this study was to determine the heat stress induced productivity loss related to different tasks of farmers in Darreh Shahr city, during summer. Material and Method: This cross-sectional study was conducted in summer, 2014, among farmers in Darreh Shahr city. After determining the sample size, farmers’ activities were determined using hierarchical task analysis (HTA, and WBGT measurements were done according to the ISO7243. Metabolism was estimated by the ISO8996. Following, the type of activities were identified according their required metabolism. Knowing WBGT and workload and using the work capacity model, the productivity loss in different tasks and ultimately total productivity loss were calculated. Result: The mean WBGT activities for plowing, terracing, planting seeds, watering, fertilizing, weeding, spraying, and harvesting were 29.98 °C, 31.28 °C,30.66 °C,31.39 °C,31.99 °C,31.75 °C,31.08 °C, and 30.3 °C, respectively. WBGT values were higher than the permissible level provided by ISO7243 in all farming activities. Maximum value of WBGT was belonged to fertilizing activity (31.99 °C and the lowest value was for plowing (29.98 °C. ANOVA test results did not show a significant difference in WBGT at head, waist, and ankle height. The highest and lowest amount of productivity loss was estimated respectively for weeding and plowing activities. The total productivity loss for farming was calculated 69.3 percent in an hour which is due to high physical activity, working outdoor, with exposure to direct solar radiation, and consequent heat stress imposed to workers. Conclusion: Productivity is a factor which is affected by the workplace heat stress. According to results of the present research, the amount of productivity is reduced

Survey of the productivity loss due to heat stress in different tasks of farmers in Darreh Shahr city

Directory of Open Access Journals (Sweden)

M. R. Monazzam Esmaielpour

2015-09-01

Full Text Available Introduction: Heat is one of the hazardous physical agents in the workplace. Exposure to heat and consequent thermal stress influence workers productivity in addition to adverse health effects. The aim of this study was to determine the heat stress induced productivity loss related to different tasks of farmers in Darreh Shahr city, during summer. . Material and Method: This cross-sectional study was conducted in summer, 2014, among farmers in Darreh Shahr city. After determining the sample size, farmers’ activities were determined using hierarchical task analysis (HTA, and WBGT measurements were done according to the ISO7243. Metabolism was estimated by the ISO8996. Following, the type of activities were identified according their required metabolism. Knowing WBGT and workload and using the work capacity model, the productivity loss in different tasks and ultimately total productivity loss were calculated. .Result: The mean WBGT activities for plowing, terracing, planting seeds, watering, fertilizing, weeding, spraying, and harvesting were 29.98 °C, 31.28 °C,30.66 °C,31.39 °C,31.99 °C,31.75 °C,31.08 °C, and 30.3 °C, respectively. WBGT values were higher than the permissible level provided by ISO7243 in all farming activities. Maximum value of WBGT was belonged to fertilizing activity (31.99 °C and the lowest value was for plowing (29.98 °C. ANOVA test results did not show a significant difference in WBGT at head, waist, and ankle height. The highest and lowest amount of productivity loss was estimated respectively for weeding and plowing activities. The total productivity loss for farming was calculated 69.3 percent in an hour which is due to high physical activity, working outdoor, with exposure to direct solar radiation, and consequent heat stress imposed to workers. .Conclusion: Productivity is a factor which is affected by the workplace heat stress. According to results of the present research, the amount of productivity is

Has Phytodetritus Processing by an Abyssal Soft-Sediment Community Recovered 26 Years after an Experimental Disturbance?

Directory of Open Access Journals (Sweden)

Tanja Stratmann

2018-02-01

Full Text Available The potential harvest of polymetallic nodules will heavily impact the abyssal, soft sediment ecosystem by removing sediment, hard substrate, and associated fauna inside mined areas. It is therefore important to know whether the ecosystem can recover from this disturbance and if so at which rate. The first objective of this study was to measure recovery of phytodetritus processing by the benthic food web from a sediment disturbance experiment in 1989. The second objective was to determine the role of holothurians in the uptake of fresh phytodetritus by the benthic food web. To meet both objectives, large benthic incubation chambers (CUBEs; 50 × 50 × 50 cm were deployed inside plow tracks (with and without holothurian presence and at a reference site (holothurian presence, only at 4100 m water depth. Shortly after deployment, 13C- and 15N-labeled phytodetritus was injected in the incubation chambers and during the subsequent 3-day incubation period, water samples were taken five times to measure the production of 13C-dissolved inorganic carbon over time. At the end of the incubation, holothurians and sediment samples were taken to determine biomass, densities and incorporation of 13C and 15N into bacteria, nematodes, macrofauna, and holothurians. For the first objective, the results showed that biomass of bacteria, nematodes and macrofauna did not differ between reference sites and plow track sites when holothurians were present. Additionally, meiofauna and macrofauna taxonomic composition was not significantly different between the sites. In contrast, total 13C uptake by bacteria, nematodes and holothurians was significantly lower at plow track sites compared to reference sites, though the number of replicates was low. This result suggests that important ecosystem functions such as organic matter processing have not fully recovered from the disturbance that occurred 26 years prior to our study. For the second objective, the analysis indicated

ERIP invention 637. Technical progress report 2nd quarter, April 1997--June 1997

Energy Technology Data Exchange (ETDEWEB)

Thacker, G.W.

1997-07-22

This technical report describes progress in the development of the Pegasus plow, a stalk and root embedding apparatus. Prototype testing is reported, and includes the addition of precision tillage. Disease data, organic matter, and nitrogen levels results are very briefly described. Progress in marketing is also reported. Current marketing issues include test use by cotton and wheat growers, establishment of dealer relationships, incorporation of design modifications, expansion of marketing activities, and expansion of loan and lease program.

St. Louis Harbor Project Pedestrian Survey, Madison County, Illinois. St. Louis District Cultural Resource Management Reports Number 24

Science.gov (United States)

1985-07-01

Britain, after 1860 (Kovel 1953:169). 3 Porcel al n 2 wheel s or casters ; one is ungl azed and very fragmented. The other is a complete wheel glazed on...piece-plotted with a transit. Following this, heavy equipment-- preferably a paddle- wheel scraper -- should remove the plow zone from the site areas...continue Into the Mississippian period (Vogel 1975). The succeeding Merrell phase Is recognized by modifications on theLateBluff jar rim and the gradual

Use of Respiratory Support in the Biphase Ventilation Airway Mode in the Newborn

OpenAIRE

S. N. Koval; A. Ye. Kulagin

2006-01-01

Biphasic positive airway pressure (BIPAP) (also known as DuoPAP, BiLevel, BiVent, PCV+, SPAP) is a mode of ventilation with cycling variations between two continuous positive airway pressure levels. It is a mixture of pressure controlled ventilation and spontaneous breathing, which is unrestricted in each phase of the respiratory cycle. The volume displacement caused by the difference between Phigh and Plow airway pressure level. The phase time ratio (PTR — the BIPAP frequency) is calculated ...

Final Environmental Impact Statement. Permit Application by Niagara Mohawk Power Corp., Proposed Lake Erie Generating Station, Pomfret and Sheridan, New York,

Science.gov (United States)

1978-12-01

are being pruned and retied, the use of machinery to cultivate between rows and during the harvest, the use of gas-cannons to repel birds during late...seasons when vines are being pruned and retied, the use of machinery to plow between rows and during the har- vest, the use of gas cannons to repel birds...construction workers, can be expected to manifest themselves in terms of retail and convenience purchases - coffee , gasoline, lunches, etc. -- and in

Yaughan and Curriboo Plantations: Studies in Afro-American Archaeology.

Science.gov (United States)

1983-04-01

of which is the site in question. Site 38BK88 can be characterized as being located in swampy uplands and was probably surrounded by dense pine barren ...disturbances from agricultural plowing or disturbances rel ated to plantation pine plantings (Garrow, and Wheaton 1979). A third site was found during...undertaken by James Deetz (1977:138-154) in 1975 at the Parting Ways Site near Plymouth , Massachusetts. Deetz’s primary emphasis paralleled that of Fairbanks

[Applicational evaluation of split tooth extractions of upper molars using piezosurgery].

Science.gov (United States)

Li, D; Guo, C B; Liu, Y; Wang, E B

2016-08-18

To evaluate the efficacy of Piezosurgery in split teeth extractions. A single-center, randomized, split-mouth study was performed using a consecutive serious of unrelated healthy patients attending the departing of oral and maxillofacial surgery, Peking University School and Hospital of Stomatology. 40 patients were selected for extraction of maxillary molars without reservation value,splitting or nonvital teeth. They were divided into control (20 patients) and test groups (20 patients) randomly. Surgical treatments for both groups were under local anesthesia. Molar teeth of control group were extracted by common equipments like dental elevators, chisels, forceps, etc. While molar teeth of experimental group were extracted by Piezosurgery, aided with the use of common equipments if needed. Then we compared the duration of surgery, frequency of the usage of chisels, expansion of postoperative bony socket surgical discomfort and postoperative pain between two groups. The average of operation time was (629.5±171.0) s in control group and (456.0±337.2) s in test group. The buccal alveolar bone reduced (1.07±0.64) mm in control group and (1.49±0.61) mm in test group. There was a significant difference between the two groups (P0.05). Piezosugery can be better to preserve alveolar bone, reduce trauma and patient's fear. Application of the piezosugery reflect the characteristics of minimally invasive extraction, which has the value of promotion. The Piezosurgery technique have the advantage of reducing change of buccal alveolar bone during the surgery, but a longer surgical time was required when compared with the conventional technique. VAS value of surgical discomfort, expansion of postoperative bony socket and the operative fear rate, there were no significant difference. Minimally invasive tooth extraction technique has good clinical results and high satisfaction. Piezosurgery proved its worth as the instrument adapted to limiting the destruction of bone tissue.

A stone mould from Klinovac

Directory of Open Access Journals (Sweden)

Bulatović Aleksandar

2002-01-01

Full Text Available A two-piece stone mould that reached the National Museum at Vranje in 1966 had been recovered from a depth of about one meter at the site known as Tri Kruške (Three Pear-trees, the village of Klinovac. The site is situated on a river terrace on the right bank of the Krševica River some 15 kilometers south of Vranje. The mould was carved out of metamorphic rock from the class of schist, more exactly, of greenschist (with chlorite and mica as its constituent minerals that is widespread in the area, which geologically belongs to the upper (Vlasina complex of the Serbian-Macedonian mass. The mould was intended for casting four kinds of bronze weapons: three chisels and a winged axe. More sensitive as dating evidence, the winged axe (Ärmchenbeil may be broadly dated to the last three centuries of the second millennium BC. The type is geographically related with the Aegean, while its northernmost findspot so far is Pobit Kamak in northern Bulgaria. The chisels cast in this mould do not have direct analogies, although many hoards of similar tools have been registered in Croatia, Romania and Central Europe. Apparently the mould was made by a local workshop and from the locally available raw material. The possible activity of local workshops in the above mentioned period has already been presumed by scholars, and the Klinovac mould constitutes yet another corroboration of the hypothesis. Nevertheless its Aegean origin should not be ruled out completely, because cultural contacts between the Late Bronze Age population inhabiting the region and their southern neighbours seem quite certain, as evidenced by Mycenaean pottery discovered on the site of Resulja at Lučani near Bujanovac.

EDARV370A associated facial characteristics in Uyghur population revealing further pleiotropic effects.

Science.gov (United States)

Peng, Qianqian; Li, Jinxi; Tan, Jingze; Yang, Yajun; Zhang, Manfei; Wu, Sijie; Liu, Yu; Zhang, Juan; Qin, Pengfei; Guan, Yaqun; Jiao, Yi; Zhang, Zhaoxia; Sabeti, Pardis C; Tang, Kun; Xu, Shuhua; Jin, Li; Wang, Sijia

2016-01-01

An adaptive variant of human Ectodysplasin receptor, EDARV370A, had undergone strong positive selection in East Asia. In mice and humans, EDARV370A was found to affect ectodermal-derived characteristics, including hair thickness, hair shape, active sweat gland density and teeth formation. Facial characteristics are also largely ectodermal derived. In this study, taking advantage of an admixed population of East Asian and European ancestry-the Uyghur, we aim to test whether EDARV370A is affecting facial characteristics and to investigate its pleiotropic nature and genetic model. In a sample of 1027 Uyghurs, we discover that EDARV370A is significantly associated with several facial characteristics, in particular shape of earlobe (P = 3.64 × 10 (-6) ) and type of chin (P = 9.23 × 10 (-5) ), with successful replication in other East Asian populations. Additionally, in this Uyghur population, we replicate previous association findings of incisors shoveling (P = 1.02 × 10 (-7) ), double incisors shoveling (P = 1.86 × 10 (-12) ) and hair straightness (P = 3.99 × 10 (-16) ), providing strong evidence supporting an additive model for the EDARV370A associations. Partial least square path model confirms EDARV370A systematically affect these weakly related ectodermal-derived characteristics, suggesting the pleiotropic effect of EDARV370A mainly plays roles in early embryo development. This study extends our knowledge about the pleiotropic nature of EDARV370A and provides potential clues to its adaptation fitness in human evolution.

Optimization Of Blasting Design Parameters On Open Pit Bench A Case Study Of Nchanga Open Pits

Directory of Open Access Journals (Sweden)

Victor Mwango Bowa

2015-08-01

Full Text Available Abstract In hard rock mining blasting is the most productive excavation technique applied to fragment insitu rock to the required size for efficient loading and crushing. In order to blast the insitu rock to the desired fragment size blast design parameter such as bench height hole diameter spacing burden hole length bottom charge specific charge and rock factor are considered. The research was carried out as a practical method on Nchanga Open Pits NOP ore Bench to optimize the blasting design parameters that can yield the required fragmentation size thereby reducing the shovel loading times and maximizing efficiency of the subsequent mining unit operations such as hauling and crushing. Fragmentation characteristics such as the mean fragment size were measured by means of a digital measuring tape and predicated using the Kuznetsov equation and rock factor value of ore bench was calculated using Lilly 1986 equations by means of rock characteristics. Traditional blasting design parameters were acquired for NOP and modified using Langerfors and Sharma P.A approaches. Several blast operations were conducted using both traditional and modified blasting design parameters on the same ore bench with the same geological conditions. Loading times of the shovel and fragment sizes were obtained after the blasts from ore bench where both the traditional and modified blasting design parameters were applied. Results show that mean fragment size and loading times were reduced from 51cm and 12minutes to 22cm and 3minutes where traditional and modified blasting design parameters were applied respectively.

The influence of grasping habits and object orientation on motor planning in children and adults.

Science.gov (United States)

Jovanovic, Bianca; Schwarzer, Gudrun

2017-12-01

We investigated the influence of habitual grasp strategies and object orientation on motor planning in 3-year-olds and 4- to 5-year-old children and adults. Participants were required to rotate different vertically oriented objects around 180°. Usually, adults perform this task by grasping objects with an awkward grip (thumb and index finger pointing downward) at the beginning of the movement, in order to finish it with a comfortable hand position. This pattern corresponds to the well-known end-state comfort effect (ESC) in grasp planning. The presented objects were associated with different habitual grasp orientations that either corresponded with the grasp direction required to reach end-state comfort (downward) or implied a contrary grasp orientation (upward). Additionally, they were presented either in their usual, canonical orientation (e.g., shovel with the blade oriented downward versus cup with its opening oriented upward) or upside down. As dependent variable we analyzed the number of grips conforming to the end-state comfort principle (ESC score) realized in each object type and orientation condition. The number of grips conforming to ESC strongly increased with age. In addition, the extent to which end-state comfort was considered was influenced by the actual orientation of the objects' functional parts. Thus, in all age-groups the ESC score was highest when the functional parts of the objects were oriented downward (shovel presented canonically with blade pointing downward, cup presented upside down) and corresponded to the hand orientation needed to realize ESC. © 2017 Wiley Periodicals, Inc.

Implementation Analysis of Cutting Tool Carbide with Cast Iron Material S45 C on Universal Lathe

Science.gov (United States)

Junaidi; hestukoro, Soni; yanie, Ahmad; Jumadi; Eddy

2017-12-01

Cutting tool is the tools lathe. Cutting process tool CARBIDE with Cast Iron Material Universal Lathe which is commonly found at Analysiscutting Process by some aspects numely Cutting force, Cutting Speed, Cutting Power, Cutting Indication Power, Temperature Zone 1 and Temperatur Zone 2. Purpose of this Study was to determine how big the cutting Speed, Cutting Power, electromotor Power,Temperatur Zone 1 and Temperatur Zone 2 that drives the chisel cutting CARBIDE in the Process of tur ning Cast Iron Material. Cutting force obtained from image analysis relationship between the recommended Component Cuting Force with plane of the cut and Cutting Speed obtained from image analysis of relationships between the recommended Cutting Speed Feed rate.

Experimental log hauling through a traditional caribou wintering area

Directory of Open Access Journals (Sweden)

Harold G. Cumming

1998-03-01

Full Text Available A 3-year field experiment (fall 1990-spring 1993 showed that woodland caribou (Rangifer tarandus caribou altered their dispersion when logs were hauled through their traditional wintering area. Unlike observations in control years 1 and 3, radio-collared caribou that had returned to the study area before the road was plowed on January 6 of the experimental year 2, moved away 8-60 km after logging activities began. Seasonal migration to Lake Nipigon islands usually peaked in April, but by February 22 of year 2, 4 of the 6 had returned. The islands provide summer refuge from predation, but not when the lake is frozen. Tracks in snow showed that some caribou remained but changed locations. They used areas near the road preferentially in year 1, early year 2, and year 3, but moved away 2-5 km after the road was plowed in year 2. In a nearby undisturbed control area, no such changes occurred. Caribou and moose partitioned habitat on a small scale; tracks showed gray wolf (Canis lupus remote from caribou but close to moose tracks. No predation on caribou was observed within the wintering area; 2 kills were found outside it. Due to the possibility of displacing caribou from winter refugia to places with higher predation risk, log hauling through important caribou winter habitat should be minimized.

Development of Powered Disk Type Sugar Cane Stubble Saver

Directory of Open Access Journals (Sweden)

Radite P.A.S.

2009-04-01

Full Text Available The objective of this research was to design, fabricate and test a prototype of sugar cane stubble saver based on powered disk mechanism. In this research, a heavy duty disk plow or disk harrow was used as a rotating knife to cut the sugarcane stubble. The parabolic disk was chosen because it is proven reliable as soil working tools and it is available in the market as spare part of disk plow or disk harrow unit. The prototype was mounted on the four wheel tractor’s three point hitch, and powered by PTO of the tractor. Two kinds of disks were used in these experiments, those were disk with regular edge or plain disk and disk with scalloped edge or scalloped disk. Both disks had diameter of 28 inch. Results of field test showed that powered disk mechanism could satisfy cut sugar cane’s stubble. However, scalloped disk type gave smoother stubble cuts compared to that of plain disk. Plain disk type gave broken stubble cut. Higher rotation (1000 rpm resulted better cuts as compared to lower rotation (500 rpm both either on plain disk and scalloped disk. The developed prototype could work below the soil surface at depth of 5 to 10 cm. With tilt angle setting 20O and disk angle 45O the width of cut was about 25 cm.

Recovery of solid rock in open-cast mines vs. combination of open-cast mining and deep mines. A cost balance sheet; Festgesteinsgewinnung im Tagebau vs. Kombination von Tagebau und Tiefbau. Eine Kostenbilanz

Energy Technology Data Exchange (ETDEWEB)

Hennig, Alexander; Niemann-Delius, Christian; Skrypzak, Thorsten [RWTH Aachen (DE). Inst. fuer Rohstoffgewinnung ueber Tage und Bohrtechnik (BBK III)

2011-10-15

Rising fuel prices have led to greater interest in working methods, which offer an economical alternative for extraction of solid rock by means of shovel and truck in recent years. In this connection starting points exist in the reduction of the specific energy consumption and wider use of cheaper electrical energy. However, energy demand and costs are only partial aspects, their effect on the overall profitability sometimes being difficult to estimate. Taking the example of a solid rock deposit two working methods, which differ fundamentally with regard to equipment and energy input, are subjected to a cost/benefit analysis below. (orig.)

Golden prospects for uranium mine

International Nuclear Information System (INIS)

Anon.

1980-01-01

Beisa Mines Ltd, a wholly-owned subsidiary of Union Corporation, looks a born winner. Although only due for completion in 1982 it can already boast several 'firsts' in the mining industry. It is, of course, the first mine in South Africa to be developed as a primary producer of uranium with gold as a by-product. Its No. 1 Ventilation Shaft is also the smallest diameter shaft in SA to use a rocker-arm shovel loader for rock removal. Moreover, Beisa will be the first mine to use the revolutionary carbon-in-pulp process on a large scale

Compliance Testing of Grissom Air Force Base Central Heating Plant Coal- Fired Boilers 3, 4, and 5, Grissom Air Force Base, Indiana

Science.gov (United States)

1992-06-01

WILLIAMS WS-07 C7 - l ASSISTANT FOREMAUP ,~~~ 7 -- BOILER #5 T!M L.T STEAi PLOW COAL FP. 2C Fab 92 ¢I00 56314 6,055 02U, 563S4 6,06: 0300 570 05 6...92P[H’, RUN U METER BOX ’? METER 80;: l -, METER BG Y’ .40 RH -. 8840 P: 1. 8840 P !;!’ DELTA H? DELTP H’ DELTA H" - --- RUEI BAPR PRESS BAR FFE: Bpp

Treatment of Explosives Residues from Range Activities

Science.gov (United States)

2009-09-01

soil plot apparatus was anchored to a 36” x 36” X 6” shipping pallet (100% recycled high density polyethylene, to allow it to be picked up using a...Lime PMSO PMSO 1. Capital Cost Application Equipment -ATV (5% interest, 5 years) 4,000 1,000 0 -Disc plow 500 125 0 -Dropseed spreader ...Dropseed spreader 375 0 0 -Hydroseeder 5,000 0 0 -Drum Mixer (cement mixer) 0 200 200 -Road grader (140 HP) 0 0 1,720 -Vibratory

AGARD Manual on Aeroelasticity in Axial-Flow Turbomachines. Volume 1. Unsteady Turbomachinery Aerodynamics

Science.gov (United States)

1987-03-01

MACHI, K. 1905 Unsteady Plow in a Turbine Rotor, VDI -Berichte 572.2p 1 9,5, pp. 273-292. FRANSSON, T.1!. and SUTER, P. 1983 Two-Dimensional and...Schaufelreihen in Axialverdichtern und Axialturbinen, VDI -Berichte No. 361, pp. 33-43. I[;RA, T. and RANNIE, W.D. 1953 Observations of Propagating Stall in...NASA-CR-3940. VICTORY, M. 1943 Flutter at High Incidence. Brit. A.R.C. R & M 2048 . VOGELER, K. 1984 The Unsteady Pressure Distribution on Parabolic

Amostragem para avaliação da fertilidade do solo em função do instrumento de coleta das amostras e de tipos de preparo do solo Sampling for soil fertility evaluation as influenced by sampling tool and soil tillage

Directory of Open Access Journals (Sweden)

Fábio Henrique Tavares de Oliveira

2007-10-01

instrumentos de coleta, a ordem decrescente de variabilidade foi: P > Mg2+ > K+ > Ca2+ > MO > pH. A fertilidade média de uma parcela sob PD ou sob PC após a colheita e antes do preparo do solo subseqüente pode ser avaliada com trado de caneca, em substituição à pá de corte, desde que na preparação da amostra composta de solo 17 % das amostras simples sejam coletadas no sulco de plantio, 33 % a 10 cm do sulco e 50 % no ponto médio entre os sulcos. A fertilidade média de uma parcela sob PD ou PC depois da colheita e antes do preparo do solo subseqüente, avaliada pela análise química da amostra composta, é semelhante àquela avaliada pela média aritmética dos resultados das análises químicas das amostras simples coletadas com pá de corte ou com trado de caneca de forma dirigida. Em geral, a coleta de pelo menos oito amostras simples de solo realizada com pá de corte ou trado de caneca de forma dirigida, conforme utilizado neste trabalho, seria suficiente para formar uma amostra composta representativa para avaliação da fertilidade do solo de uma unidade de amostragem aparentemente homogênea. Entretanto, quanto maior o número de amostras simples coletadas, maior será a confiabilidade ou exatidão da estimativa dessa fertilidade média.The measures of the average and variability of soil fertility indexes can vary with the sampling tool and soil tillage type. Soil sampling methods must be developed that are more reliable to represent the real conditions of soil fertility. This study aimed at an evaluation of the effects of the cutting shovel and hand auger on measures of average and variability of the soil fertility index (a under no-tillage (NT and conventional tillage (CT, (b to estimate the minimum number of simple samples to form a composite sample and (c to test the hypothesis that the arithmetic average of simple samples is equal to the result of the chemical analysis of the composite sample. Chromic Luvisol samples were collected in a control

Disponibilidade de nutrientes e teor de matéria orgânica em função de sistemas de cultivo e de manejo de solo Nutrient availability and organic matter content as affected by cropping systems and soil management

Directory of Open Access Journals (Sweden)

Henrique Pereira dos Santos

2003-06-01

Full Text Available Sistemas de cultivo e de manejo de solo podem alterar as propriedades químicas do solo. Após oito anos (1985 a 1993, a fertilidade do solo foi avaliada, num Latossolo Vermelho Distrófico típico, em Passo Fundo, RS, em quatro sistemas de manejo do solo: 1 semeadura direta (SD; 2 cultivo mínimo (CM; 3 preparo convencional do solo com arado e grade de discos (PCD; e 4 preparo convencional do solo com arado de aivecas e grade de discos (PCA, e em três sistemas de cultivo: sistema I (trigo/soja, sistema II (trigo/soja e ervilhaca/milho e sistema III (trigo/soja, ervilhaca/milho e aveia branca/soja. O delineamento experimental foi em blocos completos ao acaso, com parcelas subdivididas, e três repetições. A parcela principal (4 x 90m foi constituída pelos sistemas de manejo do solo e a subparcelas (4 x 10m, pelos sistemas de cultivo. Os valores de pH, Al, Ca + Mg trocáveis, matéria orgânica (MO, P extraível e K disponível diferiram entre os sistemas de manejo e de cultivo do solo. Os teores de MO, P e K, na camada 0-5cm, foram mais elevados nos sistemas conservacionistas (CM e SD em relação àqueles observados nos preparos convencionais do solo (PCD e PCA. Os valores de MO, P e K foram mais elevados na camada 0-5 cm, quando comparada com a observada de 15 a 20cm de profundidade, em todos os sistemas de manejo e cultivo do solo.Cropping systems and soil managment can change soil chemical properties. Soil fertility characteriscs were assessed after eight years (1985 to 1993 on a typical dystrophic red latosol located in Passo Fundo, State of Rio Grande do Sul, Brazil. Four soil management systems - 1 no-tillage, 2 minimum tillage, 3 conventional tillage using a disk plow plus disk harrow, and 4 conventional tillage using a moldboard plow plus disk harrow - and three cropping systems [I (wheat/soybean, II (wheat/soybean and common vetch/corn, and III (wheat/soybean, common vetch/corn and white oat/soybean] were evaluated. A randomized

Water erosion during a 17-year period under two crop rotations in four soil management systems on a Southbrazilian Inceptisol

Science.gov (United States)

Bertol, Ildegardis; Vidal Vázquez, Eva; Paz Ferreiro, Jorge

2010-05-01

Soil erosion still remains a persistent issue in the world, and this in spite of the efforts to ameliorate soil management systems taken into account the point of view of environmental protection against soil losses. In South Brazil water erosion is mainly associated to rainfall events with a great volume and high intensity, which are more or less evenly distributed all over the year. Nowadays, direct drilling is the most widely soil management system used for the main crops of the region. However, some crops still are grown on conventionally tilled soils, which means mainly ploughing and harrowing and less frequently chisel ploughing. In Lages-Santa Catarina State, Brazil, a plot experiment under natural rain was started in 1992 on an Inceptisol with the aim of quantifying soil and water losses. Treatments included bare and vegetated plots. The crop succession was: oats (Avena strigosa), soybean (Glycine max), vetch (Vicia sativa), maize (Zea mays), fodder radish (Raphanus sativus) and beans (Phaseolus vulgaris). Soil tillage systems investigated in this study were: i) conventional tillage (CT), ii) reduced tillage (MT), iii) no tillage (NT) under crop rotation and iv) conventional tillage on bare soil (BS). Treatments CT and BS involved ploughing plus twice harrowing, whereas MT involved chisel ploughing plus harrowing. Rainfall erosivity from January 1 1992 to December 31 2009 was calculated. Soil losses from the BS treatment along the 17 year study period were higher than 1200 Mg ha-1. Crop cover significantly reduced erosion, so that under some crops soil losses in the CT treatment were 80% lower than in the BS treatment. In turn soil losses in the MT treatment, where tillage was performed by chiselling and harrowing, were on average about 50% lower than in the CT treatment. No tillage was the most efficient soil management system in reducing soil erosion, so that soil losses in the NT treatment were about 98% lower than in the BS treatment. The three

Effect of Biochar Application on Erodibility of Plow Layer Soil on Loess Slopes%添加生物炭对黄绵土耕层土壤可蚀性的影响

Institute of Scientific and Technical Information of China (English)

吴媛媛; 杨明义; 张风宝; 张加琼; 赵恬茵; 刘淼

2016-01-01

The Loess Plateau is one of the areas that suffer the most serious soil erosion and the soil in the area is characterized by low soil fertility and high soil erodibility. Thanks to its inherent characteristics and physicochemical properties,biochar has become a novel soil structure amendment. However,so far studies on biochar have mostly focused on its effects of improving soil physical and chemical properties and plant growth conditions,reducing greenhouse gas emission and remedying polluted soil,and demonstrated that its positive effects on soil quality,soil bulk density,soil porosity,quantity and structure of soil aggregate and soil water dynamics. Little has been reported on its effects on soil resistance to erosion. Getting to know the effects of biochar on soil erosion will be of great significance not only to soil and water conservancy,but also to soil building and crop yield. An indoor artificial rainfall experiment was carried out to explore effect of biochar on sheet erosion on loessal soil slope. The experiment was designed to have one rainfall intensity(90 mm h-1),five application rates(0%,1%,3%,5% and 7%)and three particle sizes(<2mm,<1mm and<0.25mm)of biochar of sawdust. Results show that the effect of biochar application on erodibility of loessal soil plow layers is attributed mainly to its effects altering composition and porosity of the soil and the effect of its own properties on water,which were embodied in delayed runoff and reduced runoff and sediment yields and sediment in runoff. Incorporation of biochar,the same in particle size,shortened the duration of runoff and the effect intensified with rising application rate of biochar. However,when the application rate was lower than 3%,it delayed runoff,but when the rate went on rising,it affected runoff reversely. Incorporations of biochar,the same in rate,but different in particle size,did not show much difference in affecting time of runoff yield. Incorporation of biochar of any size at a rate

Effect of Tillage Technology on Species Composition of Weeds in Monoculture of Maize

OpenAIRE

S. Chovancova; F. Illek; J. Winkler

2014-01-01

The effect of tillage technology of maize on intensity of weed infestation and weed species composition was observed at experimental field. Maize is grown consecutively since 2001. The experimental site is situated at an altitude of 230 m above sea level in the Czech Republic. Variants of tillage technology are CT: plowing – conventional tillage 0.22 m, MT: loosening – disc tillage on the depth of 0.1 – 0.12 m, NT: direct sowing – without tillage. The evaluation of weed infestation was carrie...

Accessing the scientific literature. The reality of virtual scholarship.

Science.gov (United States)

Birrer, R B; Doherty, M

1997-01-01

The age-honored practice of plowing through the Index Medicus in a good medical library to meander through citations for treasured finds is an anachronism. Today, clinicians have the astonishing capacity to bring to bear existing knowledge almost effortlessly. Virtual scholarship makes available up-to-date medical citations and their abstracts. There can be access around the clock on any topic in the office, at the bedside, or from home. Computerized searches of the medical literature promote directed continuing education and may enhance clinical care of patients.

De un sendero sacrificial surcado de goce // from a sacrificed path plow through of pleasure

Directory of Open Access Journals (Sweden)

Mario Orozco Guzmán

2011-06-01

Full Text Available El presente trabajo discierne un semblante maldito del sacrificio. En nombre del amor se ha idealizado el sacrificio como paradigma de su audacia y heroísmo, mientras la cultura se ha encargado de enaltecer la proeza sacrificial como puesta en acto del amor. El destinatario de esta inmolación suprema inscribe la producción del goce divino en calidad de objeto “a”, tal como lo revelan sacrificios paradigmáticos presentes en la historia y la literatura. // The current work discerns a cursed countenance from the sacrifice. The sacrifice has been idealized in love's name, as paradigm of its courage and heroism, meanwhile the culture has taken charge of dignifying the sacrificed feat as event in the love act. The addressee of this supreme immolation registers the production of the divine enjoyment as “a” object, just as it is revealed by paradigmatic sacrifices present on history and literature.

Fine evaluation of the Bondons deposit and a methodology of selective mining

International Nuclear Information System (INIS)

Donnadieu, J.P.; Mascarino, M.

1990-01-01

The metamorphic deposit of Bondons is characterized by a low-grade in uranium (400 t at 600 ppm). No visual criterion permits to localize the ore which rules out the classical methods of sorting. The considerable rate of dilution which was found during the first mining stages threatened to compromise the profitability. The mining company CFM decided to apply a sorting method which permits to distinguish three categories of products: waste; low-grade ore for dump leaching; higher-grade ore for processing in the mill. This method relies basically on a very detailed geological and radiometric follow-up of the mining operation. A data acquisition system by CMS (Radacq) permits the recording of the data of radioactive logging of the shotholes at every level. The latter are processed by computer to produce finally plans for every level, in which one can see in two dimensions the geometry and the quality of the ore to be mined. The Head of the Mining Operation establishes a mining project in slices. The latter are materialized on the spot. A sampler guides the shovel operator for recovery of the mill ore. A check system for the quality of the ore contained in the shovel is installed on the arm of the digger loading the dumpers. The quality of the ore contained in the dumpers is then checked by a radiometric bridge, which completes the account of the production on a CMS. This provides the information at every instant of the quality, the quantity and the origin of any batch of ore. The system has permitted a gain of 15% of uranium metal without reducing the average grade [fr

Late Bronze Age hoard studied by PIXE

Energy Technology Data Exchange (ETDEWEB)

Gutierrez Neira, P.C., E-mail: carolina.gutierrez@uam.es [CMAM, Universidad Autonoma de Madrid, c/Farady 3, E-28049 Madrid (Spain); Zucchiatti, A., E-mail: alessandro.zucchiatti@uam.es [CMAM, Universidad Autonoma de Madrid, c/Farady 3, E-28049 Madrid (Spain); Montero-Ruiz, I., E-mail: ignacio.montero@cchs.csic.es [CCHS-CSIC, Albasanz 26-28, E 28037 Madrid (Spain); Vilaca, R., E-mail: rvilaca@fl.uc.pt [University of Coimbra, Largo da Porta Ferrea, 3000-447 Coimbra (Portugal); Bottaini, C., E-mail: keret18@yahoo.it [University of Coimbra, Largo da Porta Ferrea, 3000-447 Coimbra (Portugal); Gener, M., E-mail: marc.gener@cchs.csic.es [CCHS-CSIC, Albasanz 26-28, E 28037 Madrid (Spain); Climent-Font, A., E-mail: acf@uam.es [CMAM, Universidad Autonoma de Madrid, c/Farady 3, E-28049 Madrid (Spain); Department of Applied Physics, Universidad Autonoma de Madrid, Campus Cantobalanco, E-28049 Madrid (Spain)

2011-12-15

The hoards of metallic objects belonging to the Late European Bronze Age can be interpreted differently depending on the type, number and composition of the artefacts. PIXE analysis has been performed in nine items from the Hoard of Freixanda in Portugal comprising four socket axes, a palstave axe, a ring, a chisel, a dagger, and a casting debris. Besides the composition of the main matrix elements, that is Cu and Sn, the amount of trace elements of interest like, As, Pb, Ni, and Ag has been determined using this ion beam technique. The high tin content alloy and the high purity of the metals from the Freixanda hoard are characteristic of the Portuguese and Spanish Late Bronze Age metallurgy, supporting the idea of a regional production.

A new species of the genus Triplophysa (Cypriniformes: Nemacheilidae, Triplophysa daochengensis, from Sichuan Province, China

Directory of Open Access Journals (Sweden)

Yu-Yi WU

2016-09-01

Full Text Available Triplophysa daochengensis sp. nov. is described from the Daocheng River, a northern tributary of the Jinsha River in Sichuan Province, China. The new species can be distinguished from its congeners by the following characters: body smooth and scales absent; lateral line complete; caudal peduncle compressed, depth unchanging; head length equal to caudal-peduncle length; lower jaw shovel-shaped; dorsal-fin origin anterior to pelvic-fin origin and closer to the tip of the snout than to the caudal-fin base, last unbranched ray hard; pelvic-fin tip not reaching anus; posterior chamber of gas bladder absent; intestine of spiral type with three winding coils.

Proceedings of the 11. annual mining industry learning seminar : 2006 equipment evolutions

Energy Technology Data Exchange (ETDEWEB)

Joseph, T. [Alberta Univ., Edmonton, AB (Canada). School of Mining and Petroleum Engineering] (comp.)

2006-07-01

This seminar provided a forum for mine engineers, geologists, operators, vendors and academics to discuss various topics on equipment evolution that address mining industry concerns. Participants included those who are involved in mine planning, equipment selection, operations and maintenance. The presentations identified possible solutions to ongoing issues and alternative technologies emerging in the mining industry. Operators and original equipment manufacturers shared their innovations in novel developments and presented solutions to issues relevant to mining processes including truck and shovel technology issues such as tires, lube and fuel emissions. The seminar featured 17 presentations, of which 5 have been catalogued separately for inclusion in this database. tabs., figs.

An unusual case of non-syndromic occurrence of multiple dental anomalies

Directory of Open Access Journals (Sweden)

Suprabha B

2009-01-01

Full Text Available Dental anomalies have been known to occur in humans due to a variety of genetic and environmental factors. Combinations of dental anomalies are known to be associated with specific syndromes. A few cases of multiple dental anomalies have been reported in patients with no generalized abnormalities. This case report describes an unusual occurrence of a combination of dental anomalies in an apparently normal healthy 12-year-old female patient. The dental anomalies in this patient were multiple dens invaginatus, generalized enamel hypoplasia, generalized microdontia, root resorption and multiple periapical lesions, shovel shaped incisors, cup shaped premolars, taurodontism, hypodontia and supernumerary teeth.

Mobile equipment maintenance at Elk Valley Coal Corporation Fording River

Energy Technology Data Exchange (ETDEWEB)

NONE

2006-07-01

Major loading and support equipment, haul trucks, and the number of staff and hourly tradesmen working in the maintenance manpower division at Elk Valley Coal are listed. Maintenance strategies are safety, high maintenance of equipment availabilities and reliability, cost reduction, and maximized productivity of assets. Maintenance assets comprise a large shop, shovel and drill crew, machine shop, light vehicle facility, line crew, radio technicians, and cranes. Most maintenance work is completed in- house. Fording River uses a Computerized Maintenance Management System (CMMS) that was developed in-house to match business needs. Several examples of the application of Reliability Centered Maintenance (RCM) are described. 12 figs., 2 tabs.

Self-powered remotely controlled machines and tools for safety improvement in mining

Energy Technology Data Exchange (ETDEWEB)

Mirzaeva, G. [University of Newcastle, Callaghan, NSW (Australia)

2005-07-01

This paper addresses the problem of meeting the safety requirements of mining industry for implementation of control and monitoring equipment without external wiring. Local power generation and accumulation combined with remote control and wireless data transmission are suggested as an appropriate way to make the implementation of such device safe and convenient, which in its turn would facilitate their wider application for automation and safety improvement. A rope shovel dipper trip system is discussed in detail as an example of a self-powered remotely-controlled system. Other possible applications of the concept are also identified, such as Armoured Face Conveyor (AFC) and water jet drilling operation monitoring. 5 refs., 6 figs.

The effect of a low-glycemic diet vs a standard diet on blood glucose levels and macronutrient intake in children with type 1 diabetes.

Science.gov (United States)

Rovner, Alisha J; Nansel, Tonja R; Gellar, Lauren

2009-02-01

A low-glycemic index (GI) diet may lower postprandial hyperglycemia and decrease the risk for postabsorptive hypoglycemia in people with type 1 diabetes. However, insufficient evidence exists on the efficacy of a low-GI diet to support practice recommendations. The goal of this study was to examine the blood glucose response to and the macronutrient composition of low-GI meals vs usual meals consumed ad libitum at home in children with type 1 diabetes. A within-subject, crossover design was employed. Twenty-three participants were recruited between June and August 2006. Participants wore a continuous blood glucose monitoring system and completed diet diaries on 2 days. On 1 day, participants consumed their usual meal; on another day, participants consumed low-GI meals ad libidum. Order of the 2 days was counterbalanced. The mean GI was 34+/-6 for the low-GI day and 57+/-6 for the usual meal day (Plow-GI day, mean daytime blood glucose values (125+/-28 mg/dL [6.9+/-1.5 nmol/L] vs 185+/-58 mg/dL [10.3+/-3.2 nmol/L], Pvs 26,707+/-25,038, Pvs 13.6+/-7.6, Plow-GI day, subjects consumed more fiber (24.5+/-12.3 g vs 14.5+/-6.1 g, Pfat (45.7+/-12.2 g vs 76.8+/-32.4 g, Pcarbohydrate, or protein intake. In this pilot study, a low-GI diet was associated with improved diet quality and a reduction in hyperglycemia.

Energy flows of the biosphere

Energy Technology Data Exchange (ETDEWEB)

Gorshkov, V.G.

1980-01-01

Mankind consumes more than 90% of the animal production of the world. The locking of a significant part of the biosphere energy flow onto the anthropogenic chain leads to the dislodging of natural forms of organisms of the biosphere, change of its functioning and self-regulation. For the maintenance of stable existence of a small set of cultivated plants and domestic animals not forming the complete set indispensable for reaction to the change of natural conditions, man is compelled to follow the path of auxiliary investments of energy and to compensate for the destruction of closed circulations of food substances by the flow of fertilizers extracted from natural deposits. Energy assessments show the lack of realism of many projects for increasing the global energy flow in the anthropogenic channel by increasing the full flow of energy of the biosphere. To obtain the net production of the contemporary plowed field in hotbed on the basis of hydroponics there is required 2 x 10/sup 14/ watts of additional energy. To provide for the inflow of such an amount of energy (and also vast volumes of fresh water) presents extremely complicated problems. According to the author's calculations, in a provisional conversion of all production of green plants, all gas and petroleum and edible food with an efficiency equal to 1%, it is possible to provide food reserves equal to one annual harvest of the plowed fields of the world of 2 x 10/sup 9/ tons.

Arteriovenous extracorporeal lung assist allows for maximization of oscillatory frequencies: a large-animal model of respiratory distress

Directory of Open Access Journals (Sweden)

Kranke Peter

2008-11-01

Full Text Available Abstract Background Although the minimization of the applied tidal volume (VT during high-frequency oscillatory ventilation (HFOV reduces the risk of alveolar shear stress, it can also result in insufficient CO2-elimination with severe respiratory acidosis. We hypothesized that in a model of acute respiratory distress (ARDS the application of high oscillatory frequencies requires the combination of HFOV with arteriovenous extracorporeal lung assist (av-ECLA in order to maintain or reestablish normocapnia. Methods After induction of ARDS in eight female pigs (56.5 ± 4.4 kg, a recruitment manoeuvre was performed and intratracheal mean airway pressure (mPaw was adjusted 3 cmH2O above the lower inflection point (Plow of the pressure-volume curve. All animals were ventilated with oscillatory frequencies ranging from 3–15 Hz. The pressure amplitude was fixed at 60 cmH2O. At each frequency gas exchange and hemodynamic measurements were obtained with a clamped and de-clamped av-ECLA. Whenever the av-ECLA was de-clamped, the oxygen sweep gas flow through the membrane lung was adjusted aiming at normocapnia. Results Lung recruitment and adjustment of the mPaw above Plow resulted in a significant improvement of oxygenation (p Conclusion In this animal model of ARDS, maximization of oscillatory frequencies with subsequent minimization of VT leads to hypercapnia that can only be reversed by adding av-ECLA. When combined with a recruitment strategy, these high frequencies do not impair oxygenation

Application of cluster and discriminant analyses to diagnose lithological heterogeneity of the parent material according to its particle-size distribution

Science.gov (United States)

Giniyatullin, K. G.; Valeeva, A. A.; Smirnova, E. V.

2017-08-01

Particle-size distribution in soddy-podzolic and light gray forest soils of the Botanical Garden of Kazan Federal University has been studied. The cluster analysis of data on the samples from genetic soil horizons attests to the lithological heterogeneity of the profiles of all the studied soils. It is probable that they are developed from the two-layered sediments with the upper colluvial layer underlain by the alluvial layer. According to the discriminant analysis, the major contribution to the discrimination of colluvial and alluvial layers is that of the fraction >0.25 mm. The results of canonical analysis show that there is only one significant discriminant function that separates alluvial and colluvial sediments on the investigated territory. The discriminant function correlates with the contents of fractions 0.05-0.01, 0.25-0.05, and >0.25 mm. Classification functions making it possible to distinguish between alluvial and colluvial sediments have been calculated. Statistical assessment of particle-size distribution data obtained for the plow horizons on ten plowed fields within the garden indicates that this horizon is formed from colluvial sediments. We conclude that the contents of separate fractions and their ratios cannot be used as a universal criterion of the lithological heterogeneity. However, adequate combination of the cluster and discriminant analyses makes it possible to give a comprehensive assessment of the lithology of soil samples from data on the contents of sand and silt fractions, which considerably increases the information value and reliability of the results.

Energy-related inventions program invention 637. Final technical report

Energy Technology Data Exchange (ETDEWEB)

NONE

1997-07-31

The final technical report for the Pegasus plow, a stalk and root embedding apparatus, describes progress from the development stage to the product support stage. The US Department of Agriculture - Agriculture Research Service (ARS) is now in the second year of a three year study comparing the Pegasus to conventional tillage. So far, no downside has been with the Pegasus and the following benefits have been documented: (1) Energy savings of 65.0 kilowatt hours per hectare over conventional tillage. This is when the Pegasus plow is used to bury whole stalks, and represents a 70% savings over conventional tillage (92.5 kilowatt hours per hectare). (2) Four to seven fewer passes of tillage, depending on the particular situation. This represents a substantial time savings to farmers. (3) So far, no differences in cotton yields. Recent cotton boll counts in one study indicate a higher yield potential with the Pegasus. (4) No disease problems. (5) Significantly higher levels of organic matter in the soil. A hypothesis of the study is that whole stalk burial may reduce plant disease problems. This hypothesis has not yet been proven. (6) Significantly higher levels of nitrate nitrogen. Total nitrogen and ammonia nitrogen trended higher but were not significantly different. This shows that whole stalk burial does not adversely affect the nitrogen cycle in the soil and may actually improve it. The marketing support stage of the project is also described in the report.

Application limestone forms and doses for alfalfa in no-tillage system

Directory of Open Access Journals (Sweden)

Letícia Cristina Bertusso Toffolli

Full Text Available Alfalfa (Medicago sativa L. requires good soil fertility. Brazil is characterized by acidic soils which reduce the potential of the crop. Generally, liming is incorporated into the soil, but in tillage systems it is inadvisable. This study aimed to evaluate the effects of the lime application method and dose on pH, Al+3, V % and Ca+Mg in the soil and on dry matter yield of alfalfa cultivated under a consolidated no-tillage system. The experiment was conducted at the Experimental Station of Paraná Agronomic Institute, located in Pato Branco city, in Paraná state. The plots consisted of the types of lime application (plowing+harrowing, subsoil and surface, the sub-plots was the lime dose (0, 2, 4, 6 and 8 Mg ha-1 and the sub-sub-plots were the sampled soil depth (0-5; 5-10; 10-20 and 20-30 cm. The results show the application of lime, even superficially, caused increases in pH, concentration of Ca and Mg and base saturation of the soil, while also reducing the concentration of Al, especially in the surface layers of the soil. The practice of plowing and harrowing or of subsoiling, with the aim of lime incorporation in a consolidated no-tillage system is unnecessary. If it is required, the application of lime to the soil should be done superficially for alfalfa cultivated in this system.

Local mat-forming cyanobacteria effectively facilitate decontamination of radioactive cesium in rice fields

International Nuclear Information System (INIS)

Yamamoto, Atsushi; Yoshida, Shigeru; Okumura, Hiroshi; Inagaki, Masayo; Yamanishi, Hirokuni; Ito, Tetsuo; Furukawa, Michio

2015-01-01

The most effective and widespread method to decontaminate radioactive cesium from the Fukushima Daiichi Nuclear Power Plant Disaster was peeling topsoil. But the method had problems, such as large amounts of discarded soil and large-scale work. In nature, cyanobacteria formed biomats on the ground surface and facilitated peeling topsoil when the biomats dried. The cyanobacteria-facilitating peeling decontamination method utilized these cyanobacterial properties. Cyanobacteria are located all over Japan and 'local' cyanobacteria could be used for decontamination without introducing new species. Utilizing cyanobacteria could decrease the amount of discarded soil to about 30% and downsize the execution-scale to individual locations. Cyanobacterial biomats were easily cultivated, especially in rice fields, by maintaining wet conditions and exposure to 100 - 83% solar radiation. Shading by a thin net was helpful in maintaining an environment suitable for cyanobacteria. Nowadays, to prevent uptake of radioactive cesium into rice, K + is usually added to fertilizer in rice fields. The K + fertilization in rice fields might also enhance cyanobacterial capture of radioactive cesium, because high concentrations of K + enhanced cyanobacterial uptake of Cs + . Cyanobacteria could also mitigate the risk of radioactive cesium moving away from a decontaminating rice field. Therefore, the cyanobacteria-facilitating peeling decontamination method was proposed as an easy and safe 'D.I.Y.' method for both farmers and the environment. Besides, plowing rice fields with water before peeling improved the efficiency of this method, because plowing increased the radioactive cesium concentration in the topsoil. (author)

Pulsed Nonlinear Automatic Control System for Guidance of a Caterpillar Tractor Unit in Vineyards

Directory of Open Access Journals (Sweden)

Sit M.L.

2018-04-01

Full Text Available The automatic guidance systems of tractors for soil cultivation in vineyards have attracted the attention of researchers since the second half of the twentieth century. The purpose of this paper is to investigate the driving quality of an automatic guidance system (AGS for a caterpillar tractor unit (CTU consisting of a crawler tractor and a vineyard plow and having the orientation system by grapes stamps. Compared with the known works (in which GPS, LIDAR, and video cameras are used for orientation, the proposed system is the least expensive. For this, the existence of stability of the AGS as a whole in the range of operating speeds of the unit was proved. The dynamic model of the vineyard plow was verified on a three-point hitching system of the tractor, field tests of the AGS were carried out, which confirmed the results of theoretical studies, and suggested directions for further research. The shape and parameters of the modulation characteristic (MC of the pulse-width modulator (PWM of the AGS control system, the rational values of the hydraulic drive speeds of the sequential control mechanism of the clutch of the turn and the crawler tractor belt brake, were established, depending on the slope angle and the speed of the unit, ensuring agrotechnical requirements for driving. New solutions, in comparison with the known ones, are the ways of forming the MC of PWM using a new design probe and the associated driver MC of PWM.

Fish and Wildlife Habitat Changes Resulting from Construction of a Nine-Foot Channel on Pools 24, 25, and 26 of the Mississippi River and the Lower Illinois River,

Science.gov (United States)

1979-04-01

Sediment, and Water Clarity 132 ii Page Nutrients (Ammonia-nitrogen, Nitrate-nitro- gen, Nitrite -nitrogen, and Total Phosphorus) 135 Heavy Metals and...levels but the supply of suitable mussels had evidently fallen due to over-harvest. The shell processing and button-cutting aspect of the industry...sbos Oma pflm"as pw-a O.s. Ot wp sb1 to a* amem meate . *%fml1e ties, pved tmr r is * psotieftsm OWWOMa twi 14 plow- 1 qut - fas a .6o tow fas O~m "a

The Pealization of the Most Economical and optimized Control System

Institute of Scientific and Technical Information of China (English)

WUBin

2002-01-01

In order to plow an access to low cost automation,the method to set up the most economical and optimized control system is studied.Such a system is achieved by adopting the field bus technologies based on net connection to form the hierarchical architecture and employing genetic algorithm to intelliently optimize the parameters of the topology structure at the field execution level and the parameters of a local controller,Praxios has proved that this realization can shorten the system development cycle,improve the systtem's reliability,and achieve conspicuous social economic benefits.